Measurements of SCRF cavity dynamic heat load in horizontal test system
DeGraff, B.D.; Bossert, R.J.; Pei, L.; Soyars, W.M.; /Fermilab
2009-11-01
The Horizontal Test System (HTS) at Fermilab is currently testing fully assembled, dressed superconducting radio frequency (SCRF) cavities. These cavities are cooled in a bath of superfluid helium at 1.8K. Dissipated RF power from the cavities is a dynamic heat load on the cryogenic system. The magnitude of heat flux from these cavities into the helium is also an important variable for understanding cavity performance. Methods and hardware used to measure this dynamic heat load are presented. Results are presented from several cavity tests and testing accuracy is discussed.
Statistical electromagnetics: Complex cavities
Naus, H.W.L.
2008-01-01
A selection of the literature on the statistical description of electromagnetic fields and complex cavities is concisely reviewed. Some essential concepts, for example, the application of the central limit theorem and the maximum entropy principle, are scrutinized. Implicit assumptions, biased choic
The Influence of Tuners and Temperature on the Higher Order Mode Spectrum for 1.3 GHz SCRF Cavities
Ainsworth, R; Zhang, P; Grecki, M; Baboi, N; Wamsat, T; Eddy, N
2013-01-01
Higher Order Modes (HOMs) are of concern for superconducting cavities as they can drive instabilities and so are usually damped and monitored. With special dedicated electronics, HOMs can provide information on the position on the beam. It has been proposed that piezo tuners used to keep the cavities operating at 1.3 GHz could alter the HOM spectrum altering the calibration constants used to read out the beam position affecting long term stability of the system. Also, of interest is how the cavity reacts to the slow tuner. Detuning and the retuning the cavity may alter the HOM spectrum. This is of particular interest for future machines not planning to use dedicated HOM damping as the tuning procedure may shift the frequency of HOMs onto dangerous resonances. The effect of temperature on the HOM spectrum is also investigated. An investigation of these effects has been performed at FLASH and the results are presented.
Quantization of Electromagnetic Fields in Cavities
Kakazu, Kiyotaka; Oshiro, Kazunori
1996-01-01
A quantization procedure for the electromagnetic field in a rectangular cavity with perfect conductor walls is presented, where a decomposition formula of the field plays an essential role. All vector mode functions are obtained by using the decomposition. After expanding the field in terms of the vector mode functions, we get the quantized electromagnetic Hamiltonian.
Modeling of Electromagnetic Heating in RF Copper Accelerating Cavities
Awida, M. H. [Fermilab; Gonin, I. [Fermilab; Romanov, Romanov [Fermilab; Khabiboulline, T. [Fermilab; Yakovlev, V. [Fermilab
2016-01-17
Electromagnetic heating is a critical issue in normal conducting copper RF cavities that are employed in particle accelerators. With several tens to hundreds of kilowatts dissipated RF power, there must be an effective cooling scheme whether it is water or air based or even a combination of both. In this paper we investigate the electromagnetic heating in multiple cavities that were designed at Fermilab exploring how the electromagnetic and thermal analyses are coupled together to properly design the cooling of such cavities.
Active absorption of electromagnetic pulses in a cavity
Horsley, S A R; Tyc, T; Philbin, T G
2014-01-01
We show that a pulse of electromagnetic radiation launched into a cavity can be completely absorbed into an infinitesimal region of space, provided one has a high degree of control over the current flowing through this region. We work out explicit examples of this effect in a cubic cavity and a cylindrical one, and experimentally demonstrate the effect in the microwave regime.
Roy, S. B., E-mail: sbroy@rrcat.gov.in [Magnetic & Superconducting Materials Section, Materials & Advanced Accelerator Sciences Division, Raja Ramanna Centre for Advanced Technology, Indore 452013 (India); Myneni, G. R., E-mail: rao@jlab.org [Thomas Jefferson National Accelerator Facility, Newport News, Virginia (United States)
2015-12-04
We address the issue of qualifications of the niobium materials to be used for superconducting radio frequency (SCRF) cavity fabrications, from the point of view of a condensed matter physicist/materials scientist. We focus on the particular materials properties of niobium required for the functioning a SCRF cavity, and how to optimize the same properties for the best SCRF cavity performance in a reproducible manner. In this way the niobium materials will not necessarily be characterized by their purity alone, but in terms of those materials properties, which will define the limit of the SCRF cavity performance and also other related material properties, which will help to sustain this best SCRF cavity performance. Furthermore we point out the need of standardization of the post fabrication processing of the niobium-SCRF cavities, which does not impair the optimized superconducting and thermal properties of the starting niobium-materials required for the reproducible performance of the SCRF cavities according to the design values.
Theory of the time reversal cavity for electromagnetic fields.
Carminati, R; Pierrat, R; de Rosny, J; Fink, M
2007-11-01
We derive a general expression of the electric dyadic Green function in a time-reversal cavity, based on vector diffraction theory in the frequency domain. Our theory gives a rigorous framework to time-reversal experiments using electromagnetic waves and suggests a methodology to design structures generating subwavelength focusing after time reversal.
The electromagnetic Casimir effect of spherical cavity
无
2003-01-01
The Casimir effect results from the zero-point energy of vacuum. A spherical cavity can be divided into three regions, and we make an analysis of every region and then give a formal solution of Casimir energy. The zeta-function regularization is also used to dispel the divergence of the summation. At the end, we can see the Casimir effect of a single sphere is included in our results.
Electromagnetically induced transparency with resonant nuclei in a cavity.
Röhlsberger, Ralf; Wille, Hans-Christian; Schlage, Kai; Sahoo, Balaram
2012-02-08
The manipulation of light-matter interactions by quantum control of atomic levels has had a profound impact on optical sciences. Such manipulation has many applications, including nonlinear optics at the few-photon level, slow light, lasing without inversion and optical quantum information processing. The critical underlying technique is electromagnetically induced transparency, in which quantum interference between transitions in multilevel atoms renders an opaque medium transparent near an atomic resonance. With the advent of high-brilliance, accelerator-driven light sources such as storage rings or X-ray lasers, it has become attractive to extend the techniques of optical quantum control to the X-ray regime. Here we demonstrate electromagnetically induced transparency in the regime of hard X-rays, using the 14.4-kiloelectronvolt nuclear resonance of the Mössbauer isotope iron-57 (a two-level system). We exploit cooperative emission from ensembles of the nuclei, which are embedded in a low-finesse cavity and excited by synchrotron radiation. The spatial modulation of the photonic density of states in a cavity mode leads to the coexistence of superradiant and subradiant states of nuclei, respectively located at an antinode and a node of the cavity field. This scheme causes the nuclei to behave as effective three-level systems, with two degenerate levels in the excited state (one of which can be considered metastable). The radiative coupling of the nuclear ensembles by the cavity field establishes the atomic coherence necessary for the cancellation of resonant absorption. Because this technique does not require atomic systems with a metastable level, electromagnetically induced transparency and its applications can be transferred to the regime of nuclear resonances, establishing the field of nuclear quantum optics.
Phonon mediated electromagnetically induced absorption in cavity optomechanics
Qu, Kenan
2013-01-01
We predict the existence of the electromagnetically induced absorption (EIA) in the double cavity configurations of the optomechanical systems (OMS). We discuss the origin of the EIA in OMS which exhibit the existence of an absorption peak within the transparency window. We provide analytical results for the width and the height of the EIA peak. The combination of the EIT and EIA is especially useful for photon switching applications. The EIA that we discuss is different from the one originally discovered by Lezama et al in atomic systems and can be understood in terms of the dynamics of three coupled oscillators (rather than two) under different conditions on the relaxation parameters.
Three-Dimensional Electromagnetic High Frequency Axisymmetric Cavity Scars.
Warne, Larry Kevin; Jorgenson, Roy Eberhardt
2014-10-01
This report examines the localization of high frequency electromagnetic fi elds in three-dimensional axisymmetric cavities along periodic paths between opposing sides of the cavity. The cases where these orbits lead to unstable localized modes are known as scars. This report treats both the case where the opposing sides, or mirrors, are convex, where there are no interior foci, and the case where they are concave, leading to interior foci. The scalar problem is treated fi rst but the approximations required to treat the vector fi eld components are also examined. Particular att ention is focused on the normalization through the electromagnetic energy theorem. Both projections of the fi eld along the scarred orbit as well as point statistics are examined. Statistical comparisons are m ade with a numerical calculation of the scars run with an axisymmetric simulation. This axisymmetric cas eformstheoppositeextreme(wherethetwomirror radii at each end of the ray orbit are equal) from the two -dimensional solution examined previously (where one mirror radius is vastly di ff erent from the other). The enhancement of the fi eldontheorbitaxiscanbe larger here than in the two-dimensional case. Intentionally Left Blank
Radiation Bandwidth Improvement of Electromagnetic Band Gap Cavity Antenna
Chaabane, Abdelhalim; Djahli, Farid; Attia, Hussein; Denidni, Tayeb. A.
2017-09-01
In this paper, an electromagnetic band gap cavity antenna with improved radiation and impedance bandwidths is presented. The proposed antenna is constructed by placing a triple-layer heterogeneous printed-unprinted partially reflective surface (PRS) above a primary aperture-coupled patch antenna. The PRS unit-cell provides a positive gradient reflection phase behavior over the desired frequency range. A prototype antenna is fabricated and measured that highlighted its ability to achieve 3-dB gain bandwidth of about 35.9 %, from 7.93 GHz to 11.4 GHz, with a peak gain of 14.25 dBi at 8.5 GHz. In addition, the impedance bandwidth is 40.32 %, from 7.9 GHz to 11.89 GHz. Thus, the designed antenna outperforms many other competitors for improving the radiation bandwidth of planar antennas with the same presented concept.
Solvation of chromone using combined Discrete/SCRF models
Alemán, Carlos; Galembeck, Sergio E.
1998-06-01
The solvation of chromone has been investigated using three different combined Discrete/SCRF models. Four chromone-H 2O complexes and one chromone-4H 2O complex were obtained from geometry optimizations at the HF/6-31G(d) level. Three SCRF methods (PCM/6-31G(d), PCM/AM1 and SM2/AM1) were applied to such complexes in order to: (1) evaluate the reliability of the combined Discrete/SCRF models; (2) investigate the effects of the explicit water molecules on the free energy of solvation; and (3) analyze the characteristics of the different solvation sites of chromone. The results show that explicit solvent molecules exert a large influence on the free energy of solvation of a given molecular system providing some information about the solvation sites. Thus, the interaction of the carbonyl oxygen of chromone with the explicit water molecules is stronger than interaction provided by the ether oxygen, providing the complexes with the former interaction a more hydrophobic free energy of solvation than those with the latter. On the other hand, the comparison of the free energies of solvation for solutes with explicit water molecules in the first hydration shell and the free energies of solvation of the molecular system computed in an all-continuum approach reveals that the combined Discrete/SCRF models constitute a very reasonable strategy.
Atom-membrane cooling and entanglement using cavity electromagnetically induced transparency
Genes, Claudiu; Ritsch, Helmut; Drewsen, Michael;
2011-01-01
We investigate a hybrid optomechanical system composed of a micromechanical oscillator as a movable membrane and an atomic three-level ensemble within an optical cavity. We show that a suitably tailored cavity field response via electromagnetically induced transparency (EIT) in the atomic medium...
R-matrix theory of driven electromagnetic cavities.
Beck, F; Dembowski, C; Heine, A; Richter, A
2003-06-01
The resonances of cylindrical symmetric microwave cavities are analyzed in R-matrix theory, which transforms the input channel conditions to the output channels. Single and interfering double resonances are studied and compared with experimental results obtained with superconducting microwave cavities. Because of the equivalence of the two-dimensional Helmholtz and the stationary Schrödinger equations, the results give insight into the resonance structure of regular and chaotic quantum billiards.
Joshi, S. C.; Raghavendra, S.; Jain, V. K.; Puntambekar, A.; Khare, P.; Dwivedi, J.; Mundra, G.; Kush, P. K.; Shrivastava, P.; Lad, M.; Gupta, P. D.
2017-02-01
An extensive infrastructure facility is being established at Raja Ramanna Centre for Advanced Technology (RRCAT) for a proposed 1 GeV, high intensity superconducting proton linac for Indian Spallation Neutron Source. The proton linac will comprise of a large number of superconducting Radio Frequency (SCRF) cavities ranging from low beta spoke resonators to medium and high beta multi-cell elliptical cavities at different RF frequencies. Infrastructure facilities for SCRF cavity fabrication, processing and performance characterization at 2 K are setup to take-up manufacturing of large number of cavities required for future projects of Department of Atomic Energy (DAE). RRCAT is also participating in a DAE’s approved mega project on “Physics and Advanced technology for High intensity Proton Accelerators” under Indian Institutions-Fermilab Collaboration (IIFC). In the R&D phase of IIFC program, a number of high beta, fully dressed multi-cell elliptical SCRF cavities will be developed in collaboration with Fermilab. A dedicated facility for SCRF cavity fabrication, tuning and processing is set up. SCRF cavities developed will be characterized at 2K using a vertical test stand facility, which is already commissioned. A Horizontal Test Stand facility has also been designed and under development for testing a dressed multi-cell SCRF cavity at 2K. The paper presents the infrastructure facilities setup at RRCAT for SCRF cavity fabrication, processing and testing at 2K.
Cavity cooling of a trapped atom using Electromagnetically-Induced Transparency
Bienert, Marc
2011-01-01
A cooling scheme for trapped atoms is proposed, which combines cavity-enhanced scattering and electromagnetically induced transparency. The cooling dynamics exploits a three-photon resonance, which combines laser and cavity excitations. It is shown that relatively fast ground-state cooling can be achieved in the Lamb-Dicke regime and for large cooperativity. Efficient ground-state cooling is found for parameters of ongoing experiments.
A Perfect Electromagnetic Cavity: High Quality Factor in Subwavelength Dimensions
Ginis, Vincent; Tassin, Philippe; Soukoulis, Costas M.; Veretennicoff, Irina
2010-03-01
Transformation optics has recently provided a new way to look at the interaction between light and matter. It uses the analogy between the macroscopic Maxwell's equations in complex dielectrics and the free-space Maxwell's equations on the background of an arbitrary metric to exploit the full potential of metamaterials, of which the most exciting examples are invisibility cloaks. In this contribution, we want to show how transformation optics can be applied to design a cavity with extraordinary properties. We have demonstrated theoretically the existence of eigenmodes whose wavelength is much larger than the characteristic dimensions of the cavity. Furthermore, our design avoids the bending losses observed in traditional microcavities, so that the quality factor is only limited by intrinsic absorption of the materials. Such a ``perfect cavity'' may be interesting for applications involving optical data storage or quantum optics, where it can be used to control the rate of spontaneous emission through the Purcell effect.
Various approaches to electromagnetic field simulations for RF cavities
Liu, C; Ackermann, W; Weiland, T
2012-01-01
In the Superconducting Proton Linac (SPL) cavity, it is very important to calculate the eigenmodes precisely, because many higher order modes (HOMs) can lead to particle beam instabilities. We used and compared three different ways to calculate the eigenmodes in the SPL cavity: field simulation with hexahedron mesh in time domain, field simulation with hexahedron mesh in frequency domain and field simulation with tetrahedral mesh and higher order curvilinear elements. In this paper the principles of the three numerical methods will be introduced and compared. Finally the calculated results will be presented.
Microphonics detuning compensation in 3.9 GHZ superconducting RF cavities
Ruben Carcagno et al.
2003-10-20
Mechanical vibrations can detune superconducting radio frequency (SCRF) cavities unless a tuning mechanism counteracting the vibrations is present. Due to their narrow operating bandwidth and demanding mechanical structure, the 13-cell 3.9GHz SCRF cavities for the Charged Kaons at Main Injector (CKM) experiment at Fermilab are especially susceptible to this microphonic phenomena. We present early results correlating RF frequency detuning with cavity vibration measurements for CKM cavities; initial detuning compensation results with piezoelectric actuators are also presented.
Lin, G W; Huang, T; Lin, X M; Wang, Z Y; Gong, S Q
2012-01-01
We propose a technique for quantum nondemolition (QND) measurement and preparation of fock states by dynamics of electromagnetically induced transparency (EIT). An atomic medium trapped in an optical cavity is driven by two continuous-wave classical fields under steady-state EIT. The weak coherent fields are sequently injected into the cavity. During the process of photons passing through the cavity, a measurement on the changes of absorption loss of the probe field will be used for QND measurement of the small photon number, and thus create photon fock states, in particular single-photon states, in a heralded way.
Robust integral formulations for electromagnetic scattering from three-dimensional cavities
Lai, Jun; Greengard, Leslie; O'Neil, Michael
2017-09-01
Scattering from large, open cavity structures is of importance in a variety of electromagnetic applications. In this paper, we propose a new well conditioned integral equation for scattering from general open cavities embedded in an infinite, perfectly conducting half-space. The integral representation permits the stable evaluation of both the electric and magnetic field, even in the low-frequency regime, using the continuity equation in a post-processing step. We establish existence and uniqueness results, and demonstrate the performance of the scheme in the cavity-of-revolution case. High-order accuracy is obtained using a Nyström discretization with generalized Gaussian quadratures.
Electromagnetically induced transparency with Rydberg atoms inside a high-finesse optical cavity
Sheng, Jiteng; Kumar, Santosh; Sedlacek, Jonathon; Chao, Yuanxi; Fan, Haoquan; Shaffer, James
2016-05-01
We present experimental work on the observation of Rydberg electromagnetically induced transparency (EIT) inside a high-finesse optical cavity. We show that a cold atomic cloud with controllable number of atoms can be transported into the cavity by using a focus-tunable lens. Rydberg atoms are excited via a two-photon transition in a ladder-type EIT configuration. A three-peak structure in the cavity transmission can be observed when Rydberg EIT atoms are generated inside the cavity. The two side peaks are caused by ``bright state polaritons'', while the central peak corresponds to a ``dark-state polariton'' The cavity Rydberg EIT system can be useful for single photon generation using the Rydberg blockade effect, studying many-body physics, and generating novel quantum states amongst many other applications. This work is supported by AFOSR.
Cavity electromagnetically induced transparency and all-optical switching using ion Coulomb crystals
Albert, Magnus; Dantan, Aurelien Romain; Drewsen, Michael
2011-01-01
nonlinear interactions, such as those based on electromagnetic induced transparency (EIT)2, 3, 4, 5, 6, 9, 10, 11, 12. Here, we demonstrate for the first time EIT as well as all-optical EIT-based light switching using ion Coulomb crystals situated in an optical cavity. Changes from essentially full...
Symplectic Modeling of Beam Loading in Electromagnetic Cavities
Abell, Dan T; Webb, Stephen D
2016-01-01
Simulating beam loading in radiofrequency accelerating structures is critical for understanding higher-order mode effects on beam dynamics, such as beam break-up instability in energy recovery linacs. Full wave simulations of beam loading in radiofrequency structures are computationally expensive, while reduced models can ignore essential physics and can be difficult to generalize. We present a self-consistent algorithm derived from the least-action principle which can model an arbitrary number of cavity eigenmodes and with a generic beam distribution.
Ishihara, Yasutoshi; Ohwada, Hiroshi
2011-01-01
To improve the efficacy of hyperthermia treatment, a novel method of non-invasive measurement of changes in body temperature is proposed. The proposed method is based on phase changes with temperature in electromagnetic waves in a heating applicator and the temperature dependence of the dielectric constant. An image of the temperature change inside a body is reconstructed by applying a computed tomography algorithm. This method can be combined easily with a heating applicator based on a cavity resonator and can be used to treat cancer effectively while non-invasively monitoring the heating effect. In this paper the phase change distributions of electromagnetic waves with temperature changes are measured experimentally, and the accuracy of reconstruction is discussed. The phase change distribution is reconstructed by using a prototype system with a rectangular aluminum cavity resonator that can be rotated 360° around an axis of rotation. To make measurements without disturbing the electromagnetic field distribution, an optical electric field sensor is used. The phase change distribution is reconstructed from 4-projection data by using a simple back-projection algorithm. The paper demonstrates that the phase change distribution can be reconstructed. The difference between phase changes obtained experimentally and by numerical analysis is about 20% and is related mainly to the limited signal detection sensitivity of electromagnetic waves. A temperature change inside an object can be reconstructed from the measured phase changes in a cavity resonator.
Electromagnetic Cavity Effects from Transmitters Inside a Launch Vehicle Fairing
Trout, Dawn H.; Wahid, Parveen F.; Stanley, James E.
2009-01-01
This paper provides insight into the difficult analytical issue for launch vehicles and spacecraft that has applicability outside of the launch industry. Radiation from spacecraft or launch vehicle antennas located within enclosures in the launch vehicle generates an electromagnetic environment that is difficult to accurately predict. This paper discusses the test results of power levels produced by a transmitter within a representative scaled vehicle fairing model and provides preliminary modeling results at the low end of the frequency test range using a commercial tool. Initially, the walls of the fairing are aluminum and later, layered with materials to simulate acoustic blanketing structures that are typical in payload fairings. The effects of these blanketing materials on the power levels within the fairing are examined.
Stopping x-ray pulses in a thin-film cavity via electromagnetically induced transparency
Kong, Xiangjin
2015-01-01
Stopping light via an electromagnetically induced transparency setup for x-ray pulses in a thin film planar x-ray cavity is investigated theoretically. The pulse is nearly resonant to the 14.4 keV M\\"ossbauer transition in $^{57}\\mathrm{Fe}$, with one nm-thin layer of the latter embedded in the thin-film x-ray cavity. Via a moderate hyperfine magnetic field which takes over the role of the control field, electromagnetically induced transparency and slowing down of the x-ray pulse occurs in the cavity setup. We show that by switching off the control magnetic field, a narrowband x-ray pulse can be completely stored in the cavity for approx. hundred ns. Coherent storage occurs in this scenario by imprinting the x-ray field onto nuclear coherences in a controllable and robust manner. Additional manipulation of the external magnetic field can lead to both group velocity and phase control of the pulse in the x-ray cavity sample.
A new source of lunar electromagnetic induction - Forcing by the diamagnetic cavity
Sonett, C. P.; Wiskerchen, M. J.
1977-01-01
Analysis of the power spectral densities (PSD's) of eight 50-hour time series from Apollo 12 lunar surface magnetometer (LSM) and isochronous Explorer 35 Ames magnetometer data points to the existence of a new source of electromagnetic induction in the interior of the moon which is independent of the transverse electric mode. This source is hypothesized to arise from extension of the cavity diamagnetic field into the moon in analogy with the fringing field of a solenoid.
IBC/FEM Analysis of Electromagnetic Scatter of Cavities Coated with Layered Medium
HE Xiao-xiang; XU Jin-ping
2006-01-01
The Leontovich impedance boundary condition (IBC) is combined with the edge-based finite element method (FEM) in this paper to analyze the electromagnetic (EM) scattering of cavities coated with a multilayered dielectric.The IBC on the surface of the medium and the boundary integral equation on the aperture of the cavity are transformed into the third boundary condition,and then the functional of the boundary value problem is obtained.The surface impedance of the layered dielectric is calculated by the generalized reflection coefficient; hence,the multi-reflection of the EM wave in the dielectric is involved.As a result,the IBC is improved.Numerical results are presented,which demonstrate that the presented IBC/FEM approach is accurate and convenient for the analysis of EM scattering of open-ended cavities coated with the dielectric.
Electromagnetic Response of High-Frequency Gravitational Waves by Coupling Open Resonant Cavity
LI Fang-Yu; CHEN Ying; WANG Ping
2007-01-01
We present a new detecting scheme of high-frequency gravitational waves(HFGWs) in the GHz band,the scheme consists of a high-quality-factor open microwave cavity,a static magnetic field passing through the cavity and an electromagnetic (EM)normal mode stored in the cavity.It is found that under the resonant condition firstand second-order perturbation EM effects have almost the same detecting sensitivity to the HFGWs in the GHz band (h～10-26,v～5GHz),but the former contains more information from the HFGWs.We akso provide a very brief review for possible improving way of the sensitivity.This scheme would be Highly complementary to other schemes of detecting the HFGWs.
Ying, Kang; Chen, Dijun; Cai, Haiwen; Qu, Ronghui
2014-01-01
Cavity linewidth narrowing via double-dark resonances has been experimentally observed using the 87Rb Zeeman splitting sublevels. With the steep dispersion led by the interacting dark resonances in the tripodtype electromagnetically induced transparency system, we narrow the cavity linewidth to 250 KHz at room temperature. Furthermore, the position of this ultranarrow cavity linewidth could be tuned in a 60 MHz coupling field detuning range.
Quantum phase gate based on electromagnetically induced transparency in optical cavities
Borges, Halyne S.; Villas-Bôas, Celso J.
2016-11-01
We theoretically investigate the implementation of a quantum controlled-phase gate in a system constituted by a single atom inside an optical cavity, based on the electromagnetically induced transparency effect. First we show that a probe pulse can experience a π phase shift due to the presence or absence of a classical control field. Considering the interplay of the cavity-EIT effect and the quantum memory process, we demonstrated a controlled-phase gate between two single photons. To this end, first one needs to store a (control) photon in the ground atomic states. In the following, a second (target) photon must impinge on the atom-cavity system. Depending on the atomic state, this second photon will be either transmitted or reflected, acquiring different phase shifts. This protocol can then be easily extended to multiphoton systems, i.e., keeping the control photon stored, it may induce phase shifts in several single photons, thus enabling the generation of multipartite entangled states. We explore the relevant parameter space in the atom-cavity system that allows the implementation of quantum controlled-phase gates using the recent technologies. In particular, we have found a lower bound for the cooperativity of the atom-cavity system which enables the implementation of phase shift on single photons. The induced shift on the phase of a photonic qubit and the controlled-phase gate between single photons, combined with optical devices, enable one to perform universal quantum computation.
Simulation of electromagnetic scattering through the E-XFEL third harmonic cavity module
Joshi, N.Y; Shiliang, L; Baboi, N
2017-01-01
The European XFEL (E-XFEL) is being fabricated in Hamburg to serve as an X-ray Free Electron Laser light source. The electron beam will be accelerated through linacs consisting of 1.3GHz superconducting cavities along a length of 2.1km. In addition, third harmonic cavities will improve the quality of the beam by line arising the ﬁeld proﬁle and hence reducing the energy spread. There are eight 3.9GHz cavities within a single module AH1 of E-XFEL. The beam-excited electromagnetic(EM) ﬁeld in these cavities can be decomposed into a series of eigenmodes. These modes are, in general, not cut-oﬀ between one cavity and the next, as they are able to couple to each other through out the module. Here for the ﬁrst time, we evaluate components of the scattering matrix for module AH1. This is a computation ally expensive system, and hence we employ a Generalized Scattering Matrix(GSM)technique to allow rapid computation with reduced memory requirements. Veriﬁcation is provided on reduced structures, which are...
Sheng, Jiteng; Chao, Yuanxi; Kumar, Santosh; Fan, Haoquan; Sedlacek, Jonathon; Shaffer, James P.
2017-09-01
We present an experimental study of cavity-assisted Rydberg-atom electromagnetically induced transparency (EIT) using a high-finesse optical cavity (F ˜28 000 ). Rydberg atoms are excited via a two-photon transition in a ladder-type EIT configuration. A three-peak structure of the cavity transmission spectrum is observed when Rydberg EIT is generated inside the cavity. The two symmetrically spaced side peaks are caused by bright-state polaritons, while the central peak corresponds to a dark-state polariton. Anticrossing phenomena and the effects of mirror adsorbate electric fields are studied under different experimental conditions. We determine a lower bound on the coherence time for the system of 7.26 ±0.06 μ s , most likely limited by laser dephasing. The cavity-Rydberg EIT system can be useful for single-photon generation using the Rydberg blockade effect, studying many-body physics, and generating novel quantum states among many other applications.
A Second-Order Method for the Electromagnetic Scattering from a Large Cavity
Yingxi Wang; Kui Du; Weiwei Sun
2008-01-01
In this paper, we study the electromagnetic scattering from a two dimensional large rectangular open cavity embedded in an infinite ground plane, which is modelled by Helmholtz equations. By introducing nonlocal transparent boundary conditions, the problem in the open cavity is reduced to a bounded domain problem. A hypersingular integral operator and a weakly singular integral operator are involved in the TM and TE cases, respectively. A new second-order Toeplitz type approximation and a second-order finite difference scheme are proposed for approximating the hyper-singular integral operator on the aperture and the Helmholtz in the cavity, respectively. The existence and uniqueness of the numerical solution in the TE case are established for arbitrary wavenumbers. A fast algorithm for the second-order approximation is pro-posed for solving the cavity model with layered media. Numerical results show the second-order accuracy and efficiency of the fast algorithm. More important is that the algorithm is easy to implement as a preconditioner for cavity models with more general media.
Optical switching of cross intensity correlation in cavity electromagnetically induced transparency
Rao, Shi; Hu, Xiangming; Xu, Jun; Li, Lingchao
2017-03-01
We present optical switching of cross intensity correlation in the context of cavity electromagnetically induced transparency configuration. For symmetrical parameters, the cross intensity correlation switches from negative to positive as the atom–pump detunings change symmetrically from one case to the other. In terms of the dressed atomic states and the Bogoliubov modes we analyze the atom–photon interaction mechanism for the switching behavior, and present a numerical verification. As a by-product, we show noise squeezing of the sum or difference intensity in a limited region of parameters.
Studies of radiation fields of LCLS-II super conducting radio frequency cavities
Santana Leitner, M.; Ge, L.; Li, Z.; Xu, C.; Adolphsen, C.; Ross, M.; Carrasco, M.
2016-09-01
The Linac Coherent Light Source II (LCLS-II) will be a hard X-ray Free Electron Laser whose linac can deliver a 1.2 MW CW electron beam with bunch rates up to 1 MHz. To efficiently generate such a high power beam, Super-Conducting Radio-Frequency (SCRF) cavities will be installed in the upstream portion of the existing 3 km Linac at the SLAC National Accelerator Laboratory. The 9-cell niobium cavities will be cooled at 2K inside 35 cryomodules, each containing a string of eight of those cavities followed by a quadrupole. The strong electromagnetic fields in the SCRF cavities will extract electrons from the cavity walls that may be accelerated. Most such dark current will be deposited locally, although some electrons may reach several neighboring cryomodules, gaining substantial energy before they hit a collimator or other aperture. The power deposited by the field emitted electrons and the associated showers may pose radiation and machine protection issues at the cryomodules and also in other areas of the accelerator. Simulation of these effects is therefore crucial for the design of the machine. The in-house code Track3P was used to simulate field emitted electrons from the LCLS-II cavities, and a sophisticated 3D model of the cryomodules including all cavities was written to transport radiation with the Fluka Monte Carlo code, which was linked to Track3P through custom-made routines. This setup was used to compute power deposition in components, prompt and residual radiation fields, and radioisotope inventories.
Kawashima, Y.; Blednykh, A.; Cupolo, J.; Davidsaver, M.; Holub, B.; Ma, H.; Oliva, J.; Rose, J.; Sikora, R.; Yeddulla, M.
2011-03-28
The booster synchrotron for NSLS-II will include a 7-cell PETRA cavity, which was manufactured for the PETRA-II project at DESY. The cavity fundamental frequency operates at 500 MHz. In order to verify the impedances of the fundamental and higher-order modes (HOM), which were calculated by computer code, we measured the magnitude of the electromagnetic field of the fundamental acceleration mode and HOM using the bead-pull method. To keep the cavity body temperature constant, we used a chiller system to supply cooling water at 20 degrees C. The bead-pull measurement was automated with a computer. We encountered some issues during the measurement process due to the difficulty in measuring the electromagnetic field magnitude in a multi-cell cavity. We describe the method and apparatus for the field measurement, and the obtained results.
Bardhan, Bhaskar Roy; Kim, Moochan; Dowling, Jonathan
2012-06-01
We propose and simulate a ring-gyro optical magnetometer based on polarization rotation of an optical field in an electromagnetically induced transparency (EIT) system. By properly choosing the polarization orientations of the optical field and the transition energy levels, the transparency conditions for the polarization components are derived for the EIT system inserted into the ring-cavity setup as a cell. As the optical field passes through the cell, the fluctuations of the Rabi frequency as well as the density inside the cell, due to the fluctuations in the laser field, give rise to the dephasing of the polarization vector. We show that using the setup it is possible to achieve very sensitive measurement of the magnetic field. Besides, by making several round trips of the photons, the dephasing effects can be removed by some suitable dynamical decoupling schemes implemented with additional waveplates in the setup. This enables us to obtain long interrogation length for the EIT based optical magnetometer.
Electromagnetic Design of RF Cavities for Accelerating Low-Energy Muons
Kurennoy, Sergey S. [Los Alamos National Laboratory
2012-05-14
A high-gradient linear accelerator for accelerating low-energy muons and pions in a strong solenoidal magnetic field has been proposed for homeland defense and industrial applications. The acceleration starts immediately after collection of pions from a target in a solenoidal magnetic field and brings decay muons, which initially have kinetic energies mostly around 15-20 MeV, to 200 MeV over a distance of {approx}10 m. At this energy, both ionization cooling and further, more conventional acceleration of the muon beam become feasible. A normal-conducting linac with external-solenoid focusing can provide the required large beam acceptances. The linac consists of independently fed zero-mode (TM{sub 010}) RF cavities with wide beam apertures closed by thin conducting edge-cooled windows. Electromagnetic design of the cavity, including its RF coupler, tuning and vacuum elements, and field probes, has been developed with the CST MicroWave Studio, and is presented.
He, Xiang; Zhang, Yachun; Chen, Jianping; Chen, Yudong; Zeng, Xiaojun; Yao, Hong; Tang, Chunmei
2016-01-01
This paper reports on an experiment designed to test electromagnetic (EM) attenuation by radio-frequency (RF) plasma for cavity structures. A plasma reactor, in the shape of a hollow cylinder, filled with argon gas at low pressure, driven by a RF power source, was produced by wave-transmitting material. The detailed attenuations of EM waves were investigated under different conditions: the incident frequency is 1-4 GHz, the RF power supply is 13.56 MHz and 1.6-3 kW, and the argon pressure is 75-200 Pa. The experimental results indicate that 5-15 dB return loss can be obtained. From a first estimation, the electron density in the experiment is approximately (1.5-2.2) × 1016 m-3 and the collision frequency is about 11-30 GHz. The return loss of EM waves was calculated using a finite-difference time-domain (FDTD) method and it was found that it has a similar development with measurement. It can be confirmed that RF plasma is useful in the stealth of cavity structures such as jet-engine inlet. supported by National Natural Science Foundation of China (No. 51107033) and the Fundamental Research Funds for the Central Universities of China (No. 2013B33614)
Dodonov, V V
2016-01-01
An exact infinite set of coupled ordinary differential equations, describing the evolution of the modes of the classical electromagnetic field inside an ideal cavity, containing a thin slab with the time-dependent conductivity $\\sigma(t)$ and dielectric permittivity $\\varepsilon(t)$, is derived for the dispersion-less media. This problem is analyzed in connection with the attempts to simulate the so called Dynamical Casimir Effect in three-dimensional electromagnetic cavities, containing a thin semiconductor slab, periodically illuminated by strong laser pulses. Therefore it is assumed that functions $\\sigma(t)$ and $\\delta\\varepsilon(t)=\\varepsilon(t)-\\varepsilon(0)$ are different from zero during short time intervals (pulses) only. The main goal is to find the conditions, under which the initial nonzero classical field could be amplified after a single pulse (or a series of pulses). Approximate solutions to the dynamical equations are obtained in the cases of "small" and "big" maximal values of the function...
Dhakal, Pashupati
2016-04-01
Funding is being requested pursuant to a proposal that was submitted and reviewed through the Portfolio Analysis and Management System (PAMS). PAMS Proposal ID: 222686. Superconducting cavities are the integral part of many energy-efficient particle accelerators around the world. The current material of choice for superconducting cavities is niobium, which is the material with the highest transition temperature among pure metals. The performance of SRF cavities are influenced by the fabrication and processing steps. We plan to study the microstructural, microchemical and electromagnetic properties of Nb that are processed similar to the cavity processing steps to identify and mitigate the limiting factors to improve the performance of SRF cavities.
... may pass these bacteria to a child through kissing, sampling the child's food, or sharing eating utensils. ... pass decay-causing bacteria to their children through kissing or sharing eating utensils. Symptoms of Cavities Whether ...
Kabirzadeh, Rasoul
The GEODESIC sounding rocket encountered hundreds of localized, VLF-wave-filled density depletions in an auroral return current region at altitudes between 900--1000 km. While these are similar to well-studied lower-hybrid "spikelets", which are electrostatic, many of the GEODESIC events exhibited strong VLF magnetic field enhancements as well. In the present study we show that these magnetic field fluctuations can be interpreted as the result of geomagnetic field-aligned electron currents driven by fluctuating electric fields parallel to the geomagnetic field lines. This observation suggests that the electromagnetic wave-filled cavities are signatures of unstable filaments of return current fluctuating at VLF frequencies. We argue that the cavities' spatial dimensions, their location inside the return current region and their total radiated power are consistent with the properties of VLF saucer source regions inferred from earlier satellite observations taken at higher altitudes.
Dal Forno, Massimo; Craievich, Paolo; Baruzzo, Roberto; De Monte, Raffaele; Ferianis, Mario; Lamanna, Giuseppe; Vescovo, Roberto
2012-01-01
The Cavity Beam Position Monitor (BPM) is a beam diagnostic instrument which, in a seeded Free Electron Laser (FEL), allows the measurement of the electron beam position in a non-destructive way and with sub-micron resolution. It is composed by two resonant cavities called reference and position cavity, respectively. The measurement exploits the dipole mode that arises when the electron bunch passes off axis. In this paper we describe the Cavity BPM that has been designed and realized in the context of the FERMI@Elettra project [1]. New strategies have been adopted for the microwave design, for both the reference and the position cavities. Both cavities have been simulated by means of Ansoft HFSS [2] and CST Particle Studio [3], and have been realized using high precision lathe and wire-EDM (Electro-Discharge) machine, with a new technique that avoids the use of the sinker-EDM machine. Tuners have been used to accurately adjust the working frequencies for both cavities. The RF parameters have been estimated, and the modifications of the resonant frequencies produced by brazing and tuning have been evaluated. Finally, the Cavity BPM has been installed and tested in the presence of the electron beam.
Dal Forno, Massimo, E-mail: massimo.dalforno@phd.units.it [Department of Industrial Engineering and Information Technology, University of Trieste (Italy); Craievich, Paolo, E-mail: paolo.craievich@elettra.trieste.it [Sicrotrone Trieste S.C.p.A., Basovizza, Trieste (Italy); Baruzzo, Roberto [Cinel Strumenti Scientifici s.r.l., Vigonza, Padova (Italy); De Monte, Raffaele; Ferianis, Mario [Sicrotrone Trieste S.C.p.A., Basovizza, Trieste (Italy); Lamanna, Giuseppe [Cinel Strumenti Scientifici s.r.l., Vigonza, Padova (Italy); Vescovo, Roberto [Department of Industrial Engineering and Information Technology, University of Trieste (Italy)
2012-01-11
The Cavity Beam Position Monitor (BPM) is a beam diagnostic instrument which, in a seeded Free Electron Laser (FEL), allows the measurement of the electron beam position in a non-destructive way and with sub-micron resolution. It is composed by two resonant cavities called reference and position cavity, respectively. The measurement exploits the dipole mode that arises when the electron bunch passes off axis. In this paper we describe the Cavity BPM that has been designed and realized in the context of the FERMI-Elettra project . New strategies have been adopted for the microwave design, for both the reference and the position cavities. Both cavities have been simulated by means of Ansoft HFSS and CST Particle Studio , and have been realized using high precision lathe and wire-EDM (Electro-Discharge) machine, with a new technique that avoids the use of the sinker-EDM machine. Tuners have been used to accurately adjust the working frequencies for both cavities. The RF parameters have been estimated, and the modifications of the resonant frequencies produced by brazing and tuning have been evaluated. Finally, the Cavity BPM has been installed and tested in the presence of the electron beam.
Electromagnetic Scattering by Multiple Cavities Embedded in the Infinite 2D Ground Plane
2014-07-01
polarization (TM), where the modeling equation is the two-dimensional Helmholtz equation. Based on Fourier transform, a nonlocal transparent condition...Helmholtz equation imposed in the separated interior domains of the cavities. The existence and uniqueness of the weak solution for the model ...difference, boundary element, and hybrid methods [5, 7, 8, 11, 12, 25, 26, 29, 30]. All the model problems have been focused on a single cavity, which may
Martinez, Luis A.; Castelli, Alessandro R.; Delmas, William; Sharping, Jay E.; Chiao, Raymond
2016-11-01
We present experimental and theoretical results for the excitation of a mechanical oscillator via radiation pressure with a room-temperature system employing a relatively low-(Q) centimeter-size mechanical oscillator coupled to a relatively low-Q standard three-dimensional radio-frequency (RF) cavity resonator. We describe the forces giving rise to optomechanical coupling using the Maxwell stress tensor and show that nanometer-scale displacements are possible and experimentally observable. The experimental system is composed of a 35 mm diameter silicon nitride membrane sputtered with a 300 nm gold conducting film and attached to the end of a RF copper cylindrical cavity. The RF cavity is operated in its {{TE}}011 mode and amplitude modulated on resonance with the fundamental drum modes of the membrane. Membrane motion is monitored using an unbalanced, non-zero optical path difference, optically filtered Michelson interferometer capable of measuring sub-nanometer displacements.
Gokirmak, A; Bridgewater, A; Anlage, S M; Gokirmak, Ali; Wu, Dong-Ho; Anlage, Steven M.
1998-01-01
We have developed a method to measure the electric field standing wave distributions in a microwave resonator using a scanned perturbation technique. Fast and reliable solutions to the Helmholtz equation (and to the Schrodinger equation for two dimensional systems) with arbitrarily-shaped boundaries are obtained. We use a pin perturbation to image primarily the microwave electric field amplitude, and we demonstrate the ability to image broken time-reversal symmetry standing wave patterns produced with a magnetized ferrite in the cavity. The whole cavity, including areas very close to the walls, can be imaged using this technique with high spatial resolution over a broad range of frequencies.
Photomlxer for terahertz electromagnetic wave emission comprising quantum dots in a laser cavity
2013-01-01
The present invention relates to a photomixer for generating terahertz electromagnetic radiation in response to illumination by a time-modulated optical signal. The photomixer (300) comprises a carrier substrate (310) with a plurality of quantum dots arranged in an emission region (308) thereof...
Without the electromagnetic force, you would not be solid. The atoms of your body are held together by electromagnetism: negatively charged electrons are held around the positively charged nucleus. Atoms share electrons to form molecules, so building up the structure of matter. As its name suggests, electromagnetism has a double nature: a moving electric charge creates a magnetic field. This intimate connection between electricity and magnetism was described by James Maxwell in 1864. The electromagnetic force can be both positive and negative : opposite charges attract, whereas like charges repel. Electromagnetic radiation, such as radio, microwaves, light and X-rays, is emitted by charges when they are made to move. For example, an oscillating current in a wire emits radio waves. Text for the interactive: Why do the needles move when you switch on the current ?
Roberts, J. A.; Imholt, T.; Ye, Z.; Dyke, C. A.; Price, D. W.; Tour, J. M.
2004-04-01
A resonant microwave cavity operating in the TM010 mode was used to determine the microwave susceptibility of single walled carbon nanotubes (SWNT) that are blended in polymer matricies. The frequencies of the probe signal were 9.8, 11.4, and 35.93 GHz. Samples of 3%-19% blends of SWNT in polycarbonate were tested to determine the best blends for shielding of devices from microwaves at these frequencies. It appears that blends of 9%-11% are very effective in shielding the electric vector of electromagnetic waves. Both the electric vector and the magnetic vectors were probed by the process to determine the nature of coupling between the SWNTs and the applied fields. Some details are given about the apparatus design that enables computer collection and processing of the data to be achieved. An electronic differentiation technique was used to allow the second derivative of the cavity absorption profile to be displayed for precise measurement. Data are presented to show the relative microwave absorption for different blends of the SWNTs with polycarbonates.
Jiao Chong-Qing; Zhu Hong-Zhao
2013-01-01
The cavity-mode resonance effect could result in significant degradation of the shielding effectiveness (SE) of a shielding enclosure around its resonance frequencies.In this paper,the influence of coated wall loss on the suppression of the resonance effect is investigated.For this purpose,an equivalent circuit model is employed to analyze the SE of an apertured rectangular cavity coated with an inside layer of resistive material.The model is developed by extending Robinson's equivalent circuit model through incorporating the effect of the wall loss into both the propagation constant and the characteristic impedance of the waveguide.Calculation results show that the wall loss could lead to great improvement on the SE for frequencies near the resonance but almost no effect on the SE for frequencies far away from the resonance.
2011-09-01
September 2011 Dr. Aihua W. Wood Chairman Date //signed// September 2011 Dr. Alan V. Lair Member Date //signed// September 2011 Dr. Michael J. Havrilla Member...rest of my research committee: Dr. Alan Lair, for his support and accepting me into this program; Dr. Michael Havrilla , for his thorough and...domain [49]. Huang, Wood, and Havrilla use a hybrid finite element-Laplace transform method to analyze the scattering problem of an overfilled cavity
Volakis, J. L.; Gong, J.; Alexanian, A.; Woo, A.
1992-01-01
A new hybrid method is presented for the analysis of the scattering and radiation by conformal antennas and arrays comprised of circular or rectangular elements. In addition, calculations for cavity-backed spiral antennas are given. The method employs a finite element formulation within the cavity and the boundary integral (exact boundary condition) for terminating the mesh. By virtue of the finite element discretization, the method has no restrictions on the geometry and composition of the cavity or its termination. Furthermore, because of the convolutional nature of the boundary integral and the inherent sparseness of the finite element matrix, the storage requirement is kept very low at O(n). These unique features of the method have already been exploited in other scattering applications and have permitted the analysis of large-size structures with remarkable efficiency. In this report, we describe the method's formulation and implementation for circular and rectangular patch antennas in different superstrate and substrate configurations which may also include the presence of lumped loads and resistive sheets/cards. Also, various modelling approaches are investigated and implemented for characterizing a variety of feed structures to permit the computation of the input impedance and radiation pattern. Many computational examples for rectangular and circular patch configurations are presented which demonstrate the method's versatility, modeling capability and accuracy.
Ma Yong-Hong; Zhou Ling
2013-01-01
We propose a feasible scheme to generate electromagnetically induced transparency (EIT) and quadripartite macroscopic entanglement in an optomechanical system with one fixed mirror and three movable perfectly reflecting mirrors.We explore the EIT phenomena in this optomechanical system.Results show the appearance of EIT dips in the output field.Moreover,we demonstrate how steady-state quadripartite entanglement can be generated via radiation pressure.We also quantify the bipartite entanglement in each field-mirror subsystem and in the mirror-mirror subsystem.Findings show that a high intensity of entanglement between two subsystems can be achieved.
Electromagnetic cavity tests of Lorentz invariance on Earth and in space
Nagel, M; Döringshoff, K; Kovalchuk, E V; Peters, A
2011-01-01
We present a Michelson-Morley type experiment for testing the isotropy of the speed of light in vacuum and matter. The experiment compares the resonance frequency of an actively rotated monolithic optical cryogenic sapphire resonator against the resonance frequency of a stationary evacuated optical cavity made of ultra-low-expansion glass. The results yield an upper limit for the anisotropy of the speed of light in matter (sapphire) of Delta(c)/c < 1 x 10^-16, limited by the frequency stability of the sapphire resonator.
Electromagnetic cavity tests of Lorentz invariance on Earth and in space
Nagel, M.; Möhle, K.; Döringshoff, K.; Kovalchuk, E. V.; Peters, A.
2011-01-01
We present a Michelson-Morley type experiment for testing the isotropy of the speed of light in vacuum and matter. The experiment compares the resonance frequency of an actively rotated monolithic optical cryogenic sapphire resonator against the resonance frequency of a stationary evacuated optical cavity made of ultra-low-expansion glass. The results yield an upper limit for the anisotropy of the speed of light in matter (sapphire) of Delta(c)/c < 1 x 10^-16, limited by the frequency stabili...
Dragt, A.J.; Gluckstern, R.L.
1992-11-01
The University of Maryland Dynamical Systems and Accelerator Theory Group carries out research in two broad areas: the computation of charged particle beam transport using Lie algebraic methods and advanced methods for the computation of electromagnetic fields and beam-cavity interactions. Important improvements in the state of the art are believed to be possible in both of these areas. In addition, applications of these methods are made to problems of current interest in accelerator physics including the theoretical performance of present and proposed high energy machines. The Lie algebraic method of computing and analyzing beam transport handles both linear and nonlinear beam elements. Tests show this method to be superior to the earlier matrix or numerical integration methods. It has wide application to many areas including accelerator physics, intense particle beams, ion microprobes, high resolution electron microscopy, and light optics. With regard to the area of electromagnetic fields and beam cavity interactions, work is carried out on the theory of beam breakup in single pulses. Work is also done on the analysis of the high frequency behavior of longitudinal and transverse coupling impedances, including the examination of methods which may be used to measure these impedances. Finally, work is performed on the electromagnetic analysis of coupled cavities and on the coupling of cavities to waveguides.
Codimension 2 and 3 situations in a ring cavity with elliptically polarized electromagnetic waves
Martin, D A
2015-01-01
We study pattern formation on the plane transverse to propagation direction, in a ring cavity filled with a Kerr-like medium, subject to an elliptically polarized incoming field, by means of two coupled Lugiato-Lefever equations. We consider a wide range of possible values for the coupling parameter between different polarizations, *B*, as may happen in composite materials. Positive and also negative refraction index materials are considered. Examples of marginal instability diagrams are shown. It is shown that, within the model, instabilities cannot be of codimension higher than 3. A method for finding parameters for which codimension 2 or 3 takes place is given. The method allows us to choose parameters for which unstable wavenumbers fulfill different relations. Numerical integration results where different instabilities coexist and compete are shown.
Codimension 2 and 3 situations in a ring cavity with elliptically polarized electromagnetic waves
Mártin, D. A.; Hoyuelos, M.
2013-09-01
We study pattern formation on the plane transverse to propagation direction, in a ring cavity filled with a Kerr-like medium, subject to an elliptically polarized incoming field, by means of two coupled Lugiato-Lefever equations. We consider a wide range of possible values for the coupling parameter between different polarizations, B¯, as may happen in composite materials. Positive and also negative refraction index materials are considered. Examples of marginal instability diagrams are shown. It is shown that, within the model, instabilities cannot be of codimension higher than 3. A method for finding parameters for which codimension 2 or 3 takes place is given. The method allows us to choose parameters for which unstable wavenumbers fulfill different relations. Numerical integration results where different instabilities coexist and compete are shown.
Grant, Ian S
1990-01-01
The Manchester Physics Series General Editors: D. J. Sandiford; F. Mandl; A. C. Phillips Department of Physics and Astronomy, University of Manchester Properties of Matter B. H. Flowers and E. Mendoza Optics Second Edition F. G. Smith and J. H. Thomson Statistical Physics Second Edition F. Mandl Electromagnetism Second Edition I. S. Grant and W. R. Phillips Statistics R. J. Barlow Solid State Physics Second Edition J. R. Hook and H. E. Hall Quantum Mechanics F. Mandl Particle Physics Second Edition B. R. Martin and G. Shaw the Physics of Stars Second Edition A. C. Phillips Computing for Scient
Ying Li
2011-01-01
Full Text Available A simulation technique based on electromagnetic topology (EMT theory is proposed for analyzing electromagnetic interference (EMI coupling through apertures onto the two-transmission line enclosed within metallic structures. The electromagnetic interactions between apertures and the external-internal interactions were treated through the topological decomposition and the multistep iterative method. Then, the load responses of the two-wire transmission line are resolved by the the Baum-Liu-Tesche (BLT equation. The simulation results both without and with the electromagnetic interaction are presented for the frequency range from 100 MHz to 3 GHz. These numerical results obtained by two methods imply that the electromagnetic interaction cannot be simply ignored, especially for the frequency range up to 1 GHz.
A 200 MHz SC-RF System for the HL-LHC
Calaga, Rama
2016-01-01
A quarter wave β=1 superconducting cavity at 200 MHz is proposed for the LHC as an alternative to the present 400 MHz RF system. The primary motivation of such a system would be to accelerate higher intensity and longer bunches with improved capture efficiency. Advantages related to minimizing electron cloud effects, intra-beam scattering, heating and the possibility of luminosity levelling with bunch length are described. Some considerations related to cavity optimization, beam loading and technological challenges are addressed.
Cooley, Victoria [Univ. of Wisconsin, Madison, WI (United States)
2014-01-01
The goals of Fermilab’s Superconductivity and Radio Frequency Development Department are to engineer, fabricate, and improve superconducting radio frequency (SCRF) cavities in the interest of advancing accelerator technology. Improvement includes exploring possible limitations on cavity performance and mitigating such impediments. This report focuses on investigating and measuring the Seebeck Effect observed in cavity constituents titanium, niobium, and stainless steel arranged in thermocouples. These junctions exist between cavities, helium jackets, and bellows, and their connection can produce a loop of electrical current and magnetic flux spontaneously during cooling. The experimental procedure and results are described and analyzed. Implications relating the results to cavity performance are discussed.
Dragt, A.J.; Gluckstern, R.L.
1994-08-01
The University of Maryland Dynamical Systems and Accelerator Theory Group has been carrying out long-term research work in the general area of Dynamical Systems with a particular emphasis on applications to Accelerator Physics. This work is broadly divided into two tasks: the computation of charged particle beam transport and the computation of electromagnetic fields and beam-cavity interactions. Each of these tasks is described briefly. Work is devoted both to the development of new methods and the application of these methods to problems of current interest in accelerator physics including the theoretical performance of present and proposed high energy machines. In addition to its research effort, the Dynamical Systems and Accelerator Theory Group is actively engaged in the education of students and postdoctoral research associates. Substantial progress in research has been made during the past year. These achievements are summarized in the following report.
Dragt, A.J.; Gluckstern, R.L.
1993-06-01
The University of Maryland Dynamical Systems and Accelerator Theory Group has been carrying out long-term research work in the general area of Dynamical Systems with a particular emphasis on applications to Accelerator Physics. This work is broadly divided into two tasks: Charged Particle Beam Transport and the Computation of Electromagnetic Fields and Beam-Cavity Interactions. Each of these tasks is described briefly. Work is devoted both to the development of new methods and the application of these methods to problems of current interest in accelerator physics including the theoretical performance of present and proposed high energy machines. In addition to its research effort, the Dynamical Systems and Accelerator Theory Group is actively engaged in the education of students and postdoctoral research associates.
Ribière, M.; d'Almeida, T.; Cessenat, O.; Maulois, M.; Pouzalgues, R.; Crabos, B.; Delbos, C.; Garrigues, A.; Azaïs, B.
2016-12-01
We investigate air plasmas generated by multi-MeV pulsed X-rays at pressures ranging from 10-5 to 10-1 mbar. The experimental approach used for these studies is based on measurements of resonant frequencies damping and shift for different electromagnetic modes within a cylindrical cavity. Time-integrated electron densities in X-ray-induced air plasmas are inferred from the damping rate of the measured magnetic fields and their corresponding frequency shifts. In the present study, electron densities ranging from 108 to 109 cm-3 at pressures ranging from 10-3 to 10-1 mbar have been measured. Experimental results were confronted to 3D Maxwell-Vlasov Particle-In-Cell simulations incorporating a radiation-induced electric conductivity model. The method used in this work enables determining microscopic and macroscopic physical quantities within low pressure air plasmas generated by pulsed X-ray.
Márquez, María Jimena; Brizuela, Alicia Beatriz; Davies, Lilian; Brandán, Silvia Antonia
2015-04-30
In this work, the α and β isomers, the α-lactose monohydrate and dihydrate and the dimeric species of lactose were studied from the spectroscopic point of view in gas and aqueous solution phases combining the infrared, Horizontal Attenuated Total Reflectance (HATR) and Raman spectra with the density functional theory (DFT) calculations. Aqueous saturated solutions of α-lactose monohydrate and solutions at different molar concentrations of α-lactose monohydrate in water were completely characterized by infrared, HATR and Raman spectroscopies. For all the species in solution, the solvent effects were studied using the solvation polarizable continuum (PCM) and solvation (SM) models and, then, their corresponding solvation energies were predicted. The vibrational spectra of those species in aqueous solution were completely assigned by employing the Scaled Quantum Mechanics Force Field (SQMFF) methodology and the self-consistent reaction field (SCRF) calculations. The stabilities of all those species were studied by using the natural bond orbital (NBO), and atoms in molecules (AIM) calculations.
Brizuela, Alicia Beatriz; Castillo, María Victoria; Raschi, Ana Beatriz; Davies, Lilian; Romano, Elida; Brandán, Silvia Antonia
2014-03-31
In the present study, a complete assignment of the vibrational spectra of sucrose in aqueous medium was performed combining Pulay's Scaled Quantum Mechanics Force Field (SQMFF) methodology with self-consistent reaction field (SCRF) calculations. Aqueous saturated solutions of sucrose and solutions at different molar concentrations of sucrose in water were completely characterized by infrared, HATR, and Raman spectroscopies. In accordance with reported data of the literature for sucrose, the theoretical structures of sucrose penta and sucrose dihydrate were also optimized in gas and aqueous solution phases by using the density functional theory (DFT) calculations. The solvent effects for the three studied species were analyzed using the solvation PCM/SMD model and, then, their corresponding solvation energies were predicted. The presence of pure water, sucrose penta-hydrate, and sucrose dihydrate was confirmed by using theoretical calculations based on the hybrid B3LYP/6-31G(∗) method and the experimental vibrational spectra. The existence of both sucrose hydrate complexes in aqueous solution is evidenced in the IR and HATR spectra by means of the characteristic bands at 3388, 3337, 3132, 1648, 1375, 1241, 1163, 1141, 1001, 870, 851, 732, and 668cm(-1) while in the Raman spectrum, the groups of bands in the regions 3159-3053cm(-1), 2980, 2954, and 1749-1496cm(-1) characterize the vibration modes of those complexes. The inter and intra-molecular H bond formations in aqueous solution were studied by Natural Bond Orbital (NBO) and Atoms in Molecules theory (AIM) investigation.
Burkholder, R. J.; Chuang, C. W.; Pathak, P. H.
1987-01-01
The EM backscatter from a two-dimensional S-shaped inlet cavity is analyzed using three different techniques, namely a hybrid combination of asymptotic high frequency and modal methods, an integral equation method, and the geometrical optics ray method, respectively. This inlet has a thin absorber coating on its perfectly conducting inner walls and the planar interior termination is made perfectly conducting. The effect of the absorber on the inner wall is treated via a perturbation scheme in the hybrid approach where it is assumed that the loss is sufficiently small for the method to be valid. The results are compared with the backscatter from a straight inlet cavity to evaluate the effect of offsetting the termination in the S-bend configuration such that it is not visible from the open end of the inlet. The envelope of the backscatter pattern for the straight inlet is always seen to peak around the forward axis due to the large return from the directly visible termination, and the pattern envelope tapers off away from the forward axis. Offsetting the termination causes the envelope of the backscatter pattern to flatten out, thereby reducing the return near the forward axis by several dB. The absorber coating reduces the pattern level of the straight inlet in directions away from the forward axis but has little effect on the peak near the axis; furthermore, the absorber coating is seen to consistently reduce the backscatter from the S-bend inlet for almost all incidence angles. The hybrid method gives excellent agreement with experimental data and with the integral equation solution, whereas, the geometrical optics ray tracing method is able to generally predict the average of the bachscatter pattern but not the pattern details.
Singh, Nageshwar; Deo, M. N.; Roy, S. B.
2016-09-01
We have investigated the possible influence of surface oxides on the optical properties of a high-purity niobium (Nb) material for fabrication of superconducting radio frequency (SCRF) cavities. Various peaks in the infrared region were identified using Fourier transform infrared and Raman spectroscopy. Optical response functions such as complex refractive index, dielectric and conductivity of niobium were compared with the existing results on oxides free Nb and Cu. It was observed that the presence of a mixture of niobium-oxides, and probably near other surface impurities, appreciably influence the conducting properties of the material causing deviation from the typical metallic characteristics. In this way, the key result of this work is the observation, identification of vibrational modes of some of surface complexes and study of its influences on the optical responses of materials. This method of spectroscopic investigation will help in understanding the origin of degradation of performance of SCRF cavities.
Singh, Nageshwar [Magnetic and Superconducting Materials Section, Raja Ramanna Centre for Advanced Technology, Indore 452013, M.P. (India); Deo, M.N. [High Pressure & Synchrotron Radiation Physics Division, BARC, Mumbai 400085 (India); Roy, S.B. [Magnetic and Superconducting Materials Section, Raja Ramanna Centre for Advanced Technology, Indore 452013, M.P. (India)
2016-09-11
We have investigated the possible influence of surface oxides on the optical properties of a high-purity niobium (Nb) material for fabrication of superconducting radio frequency (SCRF) cavities. Various peaks in the infrared region were identified using Fourier transform infrared and Raman spectroscopy. Optical response functions such as complex refractive index, dielectric and conductivity of niobium were compared with the existing results on oxides free Nb and Cu. It was observed that the presence of a mixture of niobium-oxides, and probably near other surface impurities, appreciably influence the conducting properties of the material causing deviation from the typical metallic characteristics. In this way, the key result of this work is the observation, identification of vibrational modes of some of surface complexes and study of its influences on the optical responses of materials. This method of spectroscopic investigation will help in understanding the origin of degradation of performance of SCRF cavities.
Applied Electromagnetism and Materials
Moliton, André
2007-01-01
Applied Electromagnetism and Materials picks up where the author's Basic Electromagnetism and Materials left off by presenting practical and relevant technological information about electromagnetic material properties and their applications. This book is aimed at senior undergraduate and graduate students as well as researchers in materials science and is the product of many years of teaching basic and applied electromagnetism. Topics range from the spectroscopy and characterization of dielectrics and semiconductors, to non-linear effects and electromagnetic cavities, to ion-beam applications in materials science.
Theory of electromagnetic fields
Wolski, Andrzej
2011-01-01
We discuss the theory of electromagnetic fields, with an emphasis on aspects relevant to radiofrequency systems in particle accelerators. We begin by reviewing Maxwell's equations and their physical significance. We show that in free space, there are solutions to Maxwell's equations representing the propagation of electromagnetic fields as waves. We introduce electromagnetic potentials, and show how they can be used to simplify the calculation of the fields in the presence of sources. We derive Poynting's theorem, which leads to expressions for the energy density and energy flux in an electromagnetic field. We discuss the properties of electromagnetic waves in cavities, waveguides and transmission lines.
Zou, Chang-Ling; Zhang, Xufeng; Jiang, Liang; Tang, Hong
2016-05-01
Recently, cavity magnonics has attracted much attention for potential applications of coherent information transduction and hybrid quantum devices. The magnon is a collective spin wave excitation in ferromagnetic material. It is magnetically tunability, with long coherence time and non-reciprocical interaction with electro-magnetic fields. We report the coherent coupling between magnon, microwave photon and phonon. First, we demonstrate strong coupling and ultrastrong coupling between the magnon in YIG sphere and microwave photon in three-dimensional cavity. Then, based on the hybridized magnon-photon modes, we observe the triply resonant magnon-mcirowave photon-phonon coupling, where the ultrahigh-Q mechanical vibration of YIG sphere is dispersively coupled with the magnon via magnetostrictive interaction. We observe interesting phenomena, including electromagnetically induced transparency/absorption and parametric amplification. In particular, benefit from the large tunability of the magnon, we demonstrate a tunable microwave amplifier with gain as high as 30 dB. The single crystal YIG also has excellent optical properties, and thus provide a unique platform bridging MHz, GHz and THz information carriers. Finally, we present the latest progress towards coherent magnon to optical photon conversion.
Design of horizontal test cryostat for testing two 650 MHz cavities: cryogenic considerations
Khare, P.; Gilankar, S.; Kush, P. K.; Lakshminarayanan, A.; Choubey, R.; Ghosh, R.; Jain, A.; Patel, H.; Gupta, P. D.; Hocker, A.; Ozelis, J. P.; Geynisman, M.; Reid, C.; Poloubotko, V.; Mitchell, D.; Peterson, T. J.; Nicol, T. H.
2017-02-01
Horizontal Test Cryostat has been designed for testing two 650 MHz "dressed" Superconducting Radio Frequency (SCRF) cavities in a single testing cycle at Raja Ramanna Centre for Advanced Technology, India (RRCAT) in collaboration with Fermi National Accelerator Laboratory, USA (FNAL). This cryostat will facilitate testing of two 5-cell 650 MHz SCRF cavities, in CW or pulsed regime, for upcoming High Intensity Superconducting Proton Accelerator projects at both countries. Two such HTS facilities are planned, one at RRCAT for Indian Spallation Neutron Source project (ISNS), which is on the horizon, and the other at FNAL, USA. A test cryostat, a part of horizontal test stand-2 (HTS-2) will be set up at RRCAT for Indian project. In order to maximize the utility of this facility, it can also be used to test two dressed 9-cell 1.3 GHz cavities and other similarly-sized devices. The facility assumes, as an input, the availability of liquid nitrogen at 80 K and liquid helium at 4.5 K and 2 K, with a refrigeration capacity of approximately 50 W at 2 K. Design work of cryostat has been completed and now procurement process is in progress. This paper discusses salient features of the cryostat. It also describes different design calculations and ANSYS analysis for cool down of few subsystems like cavity support system and liquid nitrogen cooled thermal radiation shield of horizontal test cryostat..
Fundamentals of engineering electromagnetism
Kim, Nam; Yoon, Youngro; Jun, Sukhee; Jun, Hoin
2004-08-15
It indicates fundamentals of engineering electromagnetism. It mentions electromagnetic field model of introduction and International system of units and universal constant, Vector analysis with summary and orthogonal coordinate systems, electrostatic field on Coulomb's law and Gauss's law, electrostatic energy and strength, steady state current with Ohm's law and Joule's law and calculation of resistance, crystallite field with Vector's electrostatic potential, Biot-Savart law and application and Magnetic Dipole, time-Savart and Maxwell equation with potential function and Faraday law of electromagnetic induction, plane electromagnetic wave, transmission line, a wave guide and cavity resonator and antenna arrangement.
Dragt, A.J.; Gluckstern, R.L.
1993-06-01
The University of Maryland Dynamical Systems and Accelerator Theory Group has been carrying out long-term research work in the general area of Dynamical Systems with a particular emphasis on applications to Accelerator Physics. This work is broadly divided into two tasks: Charged Particle Beam Transport and the Computation of Electromagnetic Fields and Beam-Cavity Interactions. Each of these tasks is described briefly. Work is devoted both to the development of new methods and the application of these methods to problems of current interest in accelerator physics including the theoretical performance of present and proposed high energy machines. In addition to its research effort, the Dynamical Systems and Accelerator Theory Group is actively engaged in the education of students and postdoctoral research associates.
Jost, G.; Tran, T.M.; Appert, K. [Ecole Polytechnique Federale, Lausanne (Switzerland). Centre de Recherche en Physique des Plasma (CRPP); Wuethrich, S. [CRAY Research, PATP/PSE, EPFL, Lausanne (Switzerland)
1996-12-01
A two-dimensional PIC code aimed at the investigation of electron-cyclotron beam instabilities in gyrotrons and their effects on the beam quality is presented. The code is based on recently developed techniques for handling charge conservation and open boundaries and uses an electromagnetic field which is decomposed in its transverse magnetic (TM) and electric (TE) components. The code has been implemented on the massively parallel computer CRAY T3D, and on the CRAY Y-MP. (author) figs., tabs., refs.
Comparison of coherently coupled multi-cavity and quantum dot embedded single cavity systems.
Kocaman, Serdar; Sayan, Gönül Turhan
2016-12-12
Temporal group delays originating from the optical analogue to electromagnetically induced transparency (EIT) are compared in two systems. Similar transmission characteristics are observed between a coherently coupled high-Q multi-cavity array and a single quantum dot (QD) embedded cavity in the weak coupling regime. However, theoretically generated group delay values for the multi-cavity case are around two times higher. Both configurations allow direct scalability for chip-scale optical pulse trapping and coupled-cavity quantum electrodynamics (QED).
DYNAMICAL MODEL OF ELECTROMAGNETIC DRIVE
Trunev A. P.
2016-02-01
Full Text Available The article discusses the dynamic model of the rocket motor electromagnetic type, consisting of a source of electromagnetic waves of radio frequency band and a conical cavity in which electromagnetic waves are excited. The processes of excitation of electromagnetic oscillations in a cavity with conducting walls, as well as the waves of the YangMills field have been investigated. Multi-dimensional transient numerical model describing the processes of establishment of electromagnetic oscillations in a cavity with the conducting wall was created Separately, the case of standing waves in the cavity with conducting walls been tested. It is shown that the oscillation mode in the conducting resonator different from that in an ideal resonator, both in the steady and unsteady processes. The mechanism of formation of traction for the changes in the space-time metric, the contribution of particle currents, the Yang-Mills and electromagnetic field proposed. It is shown that the effect of the Yang-Mills field calls change the dielectric properties of vacuum, which leads to a change in capacitance of the resonator. Developed a dynamic model, which enables optimal traction on a significant number of parameters. It was found that the thrust increases in the Yang-Mills field parameters near the main resonance frequency. In the presence of thermal fluctuations and the Yang-Mills field as well the traction force changes sign, indicating the presence of various oscillation modes
... this page: //medlineplus.gov/ency/article/001055.htm Dental cavities To use the sharing features on this page, please enable JavaScript. Dental cavities are holes (or structural damage) in the ...
This book is dedicated to various aspects of electromagnetic wave theory and its applications in science and technology. The covered topics include the fundamental physics of electromagnetic waves, theory of electromagnetic wave propagation and scattering, methods of computational analysis...
This book is dedicated to various aspects of electromagnetic wave theory and its applications in science and technology. The covered topics include the fundamental physics of electromagnetic waves, theory of electromagnetic wave propagation and scattering, methods of computational analysis......, material characterization, electromagnetic properties of plasma, analysis and applications of periodic structures and waveguide components, etc....
Comparison of Multi-field Coupling Analysis of Accelerator Cavity
LI; Chun-guang; LI; Jin-hai
2013-01-01
In the high power accelerator cavity,the joule heat produced by the electromagnetic fields causes the temperature of the cavity rising which leads to frequency changed,called frequency shift.The analysis of the effect of power to the frequency shift is an important task of accelerator cavity design.It involves heat,structure and high frequency analysis.
On the inside of the cavity there is a layer of niobium. Operating at 4.2 degrees above absolute zero, the niobium is superconducting and carries an accelerating field of 6 million volts per metre with negligible losses. Each cavity has a surface of 6 m2. The niobium layer is only 1.2 microns thick, ten times thinner than a hair. Such a large area had never been coated to such a high accuracy. A speck of dust could ruin the performance of the whole cavity so the work had to be done in an extremely clean environment.
1988-01-01
The pulse of a particle accelerator. 128 of these radio frequency cavities were positioned around CERN's 27-kilometre LEP ring to accelerate electrons and positrons. The acceleration was produced by microwave electric oscillations at 352 MHz. The electrons and positrons were grouped into bunches, like beads on a string, and the copper sphere at the top stored the microwave energy between the passage of individual bunches. This made for valuable energy savings as it reduced the heat generated in the cavity.
Subwavelength rectangular cavity partially filled with left-handed materials
Jiang Tian; Chen Yan; Feng Yi-Jun
2006-01-01
In this paper, we present the electromagnetic analysis of a rectangular cavity partially filled with a left-handed material slab. Our theoretical investigation shows that there exist novel resonant modes in the cavity, and such a cavity becomes a subwavelength cavity. The eigenvalue equation of the cavity is derived and the resonant frequencies of the novel modes are calculated by using numerical simulation. We also discuss the stability of the novel resonant modes and show the best condition under which a useful rectangular cavity of subwavelength dimensions with tolerable stability is obtained.
Injector Cavities Fabrication, Vertical Test Performance and Primary Cryomodule Design
Wang, Haipeng [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Cheng, Guangfeng [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Clemens, William [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Davis, G [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Macha, Kurt [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Overton, Roland [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Spell, D. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States)
2015-09-01
After the electromagnetic design and the mechanical design of a β=0.6, 2-cell elliptical SRF cavity, the cavity has been fabricated. Then both 2-cell and 7-cell cavities have been bench tuned to the target values of frequency, coupling external Q and field flatness. After buffer chemistry polishing (BCP) and high pressure rinses (HPR), Vertical 2K cavity test results have been satisfied the specifications and ready for the string assembly. We will report the cavity performance including Lorenz Force Detuning (LFD) and Higher Order Modes (HOM) damping data. Its integration with cavity tuners to the cryomodule design will be reported.
Electromagnetic Field Penetration Studies
Deshpande, M.D.
2000-01-01
A numerical method is presented to determine electromagnetic shielding effectiveness of rectangular enclosure with apertures on its wall used for input and output connections, control panels, visual-access windows, ventilation panels, etc. Expressing EM fields in terms of cavity Green's function inside the enclosure and the free space Green's function outside the enclosure, integral equations with aperture tangential electric fields as unknown variables are obtained by enforcing the continuity of tangential electric and magnetic fields across the apertures. Using the Method of Moments, the integral equations are solved for unknown aperture fields. From these aperture fields, the EM field inside a rectangular enclosure due to external electromagnetic sources are determined. Numerical results on electric field shielding of a rectangular cavity with a thin rectangular slot obtained using the present method are compared with the results obtained using simple transmission line technique for code validation. The present technique is applied to determine field penetration inside a Boeing-757 by approximating its passenger cabin as a rectangular cavity filled with a homogeneous medium and its passenger windows by rectangular apertures. Preliminary results for, two windows, one on each side of fuselage were considered. Numerical results for Boeing-757 at frequencies 26 MHz, 171-175 MHz, and 428-432 MHz are presented.
LLRF Control of High Loaded-Q Cavities for the LCLS-II
Serrano, Carlos [LBNL, Berkeley; Babel, Sandeep [SLAC; Bachimanchi, Ramakrishna [Jefferson Lab; Boyes, Matt [SLAC; Chase, Brian [Fermilab; Cullerton, Ed [Fermilab; Doolittle, Lawrence [LBNL, Berkeley; Einstein, Joshua [Fermilab; Hong, Bo [SLAC; Hovater, Curt [Jefferson Lab; Huang, Gang [LBNL, Berkeley; Ratti, Alessandro [LBNL, Berkeley
2016-06-01
The SLAC National Accelerator Laboratory is planning an upgrade (LCLS-II) to the Linear Coherent Light Source with a 4 GeV CW Superconducting Radio Frequency (SCRF) linac. The nature of the machine places stringent requirements in the Low-Level RF (LLRF) system, expected to control the cavity fields within 0.01 degrees in phase and 0.01% in amplitude, which is equivalent to a longitudinal motion of the cavity structure in the nanometer range. This stability has been achieved in the past but never for hundreds of superconducting cavities in Continuous-Wave (CW) operation. The difficulty resides in providing the ability to reject disturbances from the cryomodule, which is incompletely known as it depends on the cryomodule structure itself (currently under development at JLab and Fermilab) and the harsh accelerator environment. Previous experience in the field and an extrapolation to the cavity design parameters (relatively high Q_{L}c≈ 4×10⁷ , implying a half-bandwidth of around 16 Hz) suggest the use of strong RF feedback to reject the projected noise disturbances, which in turn demands careful engineering of the entire system.
Superconducting spoke cavities for high-velocity applications
Hopper, Christopher S. [Old Dominion U.; Delayen, Jean R. [Old Dominion U., JLAB
2013-10-01
To date, superconducting spoke cavities have been designed, developed, and tested for particle velocities up to {beta}{sub 0}~0.6, but there is a growing interest in possible applications of multispoke cavities for high-velocity applications. We have explored the design parameter space for low-frequency, high-velocity, double-spoke superconducting cavities in order to determine how each design parameter affects the electromagnetic properties, in particular the surface electromagnetic fields and the shunt impedance. We present detailed design for cavities operating at 325 and 352 MHz and optimized for {beta}{sub 0}~=0.82 and 1.
Chaotic dynamics of a classical radiant cavity
Benenti, G; Guarneri, I; Benenti, Giuliano; Casati, Giulio; Guarneri, Italo
1999-01-01
The statistical properties of a classical electromagnetic field in interaction with matter are numerically investigated on a one-dimensional model of a radiant cavity, conservative and with finite total energy. Our results suggest a trend towards equipartition of energy, with the relaxation times of the normal modes of the cavity increasing with the mode frequency according to a law, the form of which depends on the shape of the charge distribution.
Reciprocity and mutual impedance formulas within lossy cavities
F. Gronwald
2005-01-01
Full Text Available We discuss the validity of reciprocity and mutual impedance formulas within lossy cavities. Mutual impedance formulas are well-known from antenna theory and useful to describe the electromagnetic coupling between electromagnetic interference sources and victims. As an example the mutual impedance between two dipole antennas within a lossy rectangular cavity is calculated from a system of coupled Hallén's equations that efficiently is solved by the method of moments.
Milson, James L.
1990-01-01
Three activities involving electromagnetism are presented. Discussed are investigations involving the construction of an electromagnet, the effect of the number of turns of wire in the magnet, and the effect of the number of batteries in the circuit. Extension activities are suggested. (CW)
Bosanac, Slobodan Danko
2016-01-01
This book is devoted to theoretical methods used in the extreme circumstances of very strong electromagnetic fields. The development of high power lasers, ultrafast processes, manipulation of electromagnetic fields and the use of very fast charged particles interacting with other charges requires an adequate theoretical description. Because of the very strong electromagnetic field, traditional theoretical approaches, which have primarily a perturbative character, have to be replaced by descriptions going beyond them. In the book an extension of the semi-classical radiation theory and classical dynamics for particles is performed to analyze single charged atoms and dipoles submitted to electromagnetic pulses. Special attention is given to the important problem of field reaction and controlling dynamics of charges by an electromagnetic field.
Bosanac, Slobodan Danko [Ruder Boskovic Institute, Zagreb (Croatia). Physical Chemistry
2016-07-01
This book is devoted to theoretical methods used in the extreme circumstances of very strong electromagnetic fields. The development of high power lasers, ultrafast processes, manipulation of electromagnetic fields and the use of very fast charged particles interacting with other charges requires an adequate theoretical description. Because of the very strong electromagnetic field, traditional theoretical approaches, which have primarily a perturbative character, have to be replaced by descriptions going beyond them. In the book an extension of the semi-classical radiation theory and classical dynamics for particles is performed to analyze single charged atoms and dipoles submitted to electromagnetic pulses. Special attention is given to the important problem of field reaction and controlling dynamics of charges by an electromagnetic field.
Optical cavity resonator in an expanding universe
Kopeikin, Sergei M.
2015-02-01
We study the cosmological evolution of frequency of a standing electromagnetic wave in a resonant optical cavity placed to the expanding manifold described by the Robertson-Walker metric. Because of the Einstein principle of equivalence (EEP), one can find a local coordinate system (a local freely falling frame), in which spacetime is locally Minkowskian. However, due to the conformal nature of the Robertson-Walker metric the conventional transformation to the local inertial coordinates introduces ambiguity in the physical interpretation of the local time coordinate, . Therefore, contrary to a common-sense expectation, a straightforward implementation of EEP alone does not allow us to unambiguously decide whether atomic clocks based on quantum transitions of atoms, ticks at the same rate as the clocks based on electromagnetic modes of a cavity. To resolve this ambiguity we have to analyse the cavity rigidity and the oscillation of its electromagnetic modes in an expanding universe by employing the full machinery of the Maxwell equations irrespectively of the underlying theory of gravity. We proceed in this way and found out that the size of the cavity and the electromagnetic frequency experience an adiabatic drift in conformal (unphysical) coordinates as the universe expands in accordance with the Hubble law. We set up the oscillation equation for the resonant electromagnetic modes, solve it by the WKB approximation, and reduce the coordinate-dependent quantities to their counterparts measured by a local observer who counts time with atomic clock. The solution shows that there is a perfect mutual cancellation of the adiabatic drift of cavity's frequency by space transformation to local coordinates and the time counted by the clocks based on electromagnetic modes of cavity has the same rate as that of atomic clocks. We conclude that if general relativity is correct and the local expansion of space is isotropic there should be no cosmological drift of frequency of a
GENERAL RELATIVITY AND THEORY OF ELECTROMAGNETIC DRIVE
Trunev A. P.
2015-12-01
Full Text Available The article presents the theory of the electromagnetic type of rocket motor. The apparatus consists of a magnetron and a conical cavity in which electromagnetic oscillations are excited. We explain the mechanism of trust in such a device based on Maxwell's theory and the Abraham force. We built a dynamic model of the motor and calculated the optimal parameters. It is shown, that the laws of conservation of momentum and energy for the rocket motor of electromagnetic type are true, taking into account the gravitational field. In simulation, the movement used the theory of relativity. The source of the motion in an electromagnetic drive is the mass conversion in various kinds of radiation. The optimization of the operating parameters of the device is done, namely by the excitation frequency, the magnitude of heat losses of electromagnetic energy by thermal radiation in the IR spectrum, the parameters of heat transfer and forced from the temperature dependence of the resistance of the material of the cavity walls. It was found that the effective conversion of electromagnetic energy in the trust force necessary to minimize the deviation of the excitation frequency of the primary resonance frequency of the cavity. The mechanism of formation of trust under change the metrics of space-time, taking into account the contribution of the Yang-Mills theory and electromagnetic field tensor of energymomentum has been proposed
Geometrically induced surface polaritons in planar nanostructured metallic cavities
Davids, P. S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Intravia, F [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dalvit, Diego A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2014-01-14
We examine the modal structure and dispersion of periodically nanostructured planar metallic cavities within the scattering matrix formulation. By nanostructuring a metallic grating in a planar cavity, artificial surface excitations or spoof plasmon modes are induced with dispersion determined by the periodicity and geometric characteristics of the grating. These spoof surface plasmon modes are shown to give rise to new cavity polaritonic modes at short mirror separations that modify the density of modes in nanostructured cavities. The increased modal density of states form cavity polarirons have a large impact on the fluctuation induced electromagnetic forces and enhanced hear transfer at short separations.
Crane, Randolph W.; Marts, Donna J.
1994-01-01
An electromagnetic fastener for manipulating objects in space uses the matic attraction of various metals. An end effector is attached to a robotic manipulating system having an electromagnet such that when current is supplied to the electromagnet, the object is drawn and affixed to the end effector, and when the current is withheld, the object is released. The object to be manipulated includes a multiplicity of ferromagnetic patches at various locations to provide multiple areas for the effector on the manipulator to become affixed to the object. The ferromagnetic patches are sized relative to the object's geometry and mass.
Thomas, David T; Hartnett, James P; Hughes, William F
1973-01-01
The applications involving electromagnetic fields are so pervasive that it is difficult to estimate their contribution to the industrial output: generation of electricity, power transmission lines, electric motors, actuators, relays, radio, TV and microwave transmission and reception, magnetic storage, and even the mundane little magnet used to hold a paper note on the refrigerator are all electromagnetic in nature. One would be hard pressed to find a device that works without relaying on any electromagnetic principle or effect. This text provides a good theoretical understanding of the electromagnetic field equations but also treats a large number of applications. In fact, no topic is presented unless it is directly applicable to engineering design or unless it is needed for the understanding of another topic. In electrostatics, for example, the text includes discussions of photocopying, ink-jet printing, electrostatic separation and deposition, sandpaper production, paint spraying, and powder coating. In ma...
... causes cancer. Some people worry that wireless and cellular phones cause cancer or other health problems. The phones do give off radio-frequency energy (RF), a form of electromagnetic radiation. So far, scientific evidence has not found a ...
2012-03-01
DISTRIBUTION STATEMENT A: Approved for Public Release Electromagnetic Railgun ASNE Combat System Symposium 26-29 March 2012 CAPT Mike...4. TITLE AND SUBTITLE Electromagnetic Railgun 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER...Defense 3/29/2012 Slide 5 Distribution A Naval Railgun – Key Elements Capacitors or Rotating Machines Ship Integration Launcher Projectile
Cermak, Daniel; Okutsu, Ayaka; Jørgensen, Stina Marie Hasse
2015-01-01
Daniel Cermak-Sassenrath, Ayaka Okutsu, Stina Hasse. Electromagnetic Landscape - In-between Signal, Noise and Environment. Installation and artist talk. 21th International Symposium on Electronic Art (ISEA) 2015, Vancouver, CAN, Aug 14-18, 2015.......Daniel Cermak-Sassenrath, Ayaka Okutsu, Stina Hasse. Electromagnetic Landscape - In-between Signal, Noise and Environment. Installation and artist talk. 21th International Symposium on Electronic Art (ISEA) 2015, Vancouver, CAN, Aug 14-18, 2015....
Characteristics of Electromagnetic Coupling with A Wire through Shielding Enclosure
Yanpeng Sun
2013-09-01
Full Text Available The paper presents a numerical method based on Finite Difference Time Domain (FDTD in both frequency and time domain for modeling the coupling of an incident electromagnetic pulse(EMP with a conducting wire through a metallic shielding enclosure with a small aperture. Simulation and analysis are done by radius, length, and number of the wires, the incidence angle of EMP and the polaration angle of electric field in consideration. The simulation result shows that interference of the electromagnetic coupling into the shielding enclosure can be affected in different degrees by above factors. At low frequency, the larger the leakage length, the radius or the number of the wire penetrated into the cavity, the more interference is coupled into the shielding cavity from electromagnetic field. Also, the smaller the incident direction angle of propagation of the electromagnetic pulse or the polarization direction angle of the incident electric field, the more easily the electromagnetic interference is coupled into the cavity.
Spontaneous Photon Emission in Cavities
Alber G.
2014-01-01
Full Text Available We investigate spontaneous photon emission processes of two-level atoms in parabolic and ellipsoidal cavities thereby taking into account the full multimode scenario. In particular, we calculate the excitation probabilities of the atoms and the energy density of the resulting few-photon electromagnetic radiation field by using semiclassical methods for the description of the multimode scenario. Based on this approach photon path representations are developed for relevant transition probability amplitudes which are valid in the optical frequency regime where the dipole and the rotating-wave approximations apply. Comparisons with numerical results demonstrate the quality of these semiclassical results even in cases in which the wave length of a spontaneously emitted photon becomes comparable or even larger than characteristic length scales of the cavity. This is the dynamical regime in which diffraction effects become important so that geometric optical considerations are typically not applicable.
丁亮; 邓丽城; 陈珊珊
2011-01-01
Christoffel connection, ricci tensor, curvature scalar and energy density of the standing gravitational wave produced by strong electromagnetic normal mode of the toroidal cavity in its focal region is calculated in this study, using the cylindrical coordinate system, under the condition of weak field. The energy density of the standing gravitational wave is found to be positive definite in the focal region of the cavity. The relationship between energy density of the gravitational wave and curvature scalar is discussed. Both the microwave cavity of strong field with high quality factor Q and the nuclear fusion device Tokamak are characterized by axial symmetry and can be used as potential sources of high-frequency gravitational waves. The conclusions as shown above may have a prospective significance for producing and detecting high-frequency gravitational waves.%基于弱场条件,计算了在柱坐标下由电磁环形腔中强电磁简正模在其焦点区域产生的引力驻波的第二类克氏联络、里奇张量、曲率标量及其能量密度.研究发现,在焦点区域的引力驻波的能量密度是正定的.此外,讨论了该引力驻波的能量密度和时空的曲率标量的关系.高Q值强场环形微波腔以及受控核聚变的Tokamak装置均具有轴对称的特点,并可作为可能的潜在高频引力波源.
Benchmarking Microwave Cavity Dark Matter Searches using a Radioactive Source
Caspers, F
2014-01-01
A radioactive source is proposed as a calibration device to verify the sensitivity of a microwave dark matter search experiment. The interaction of e.g., electrons travelling in an arbitrary direction and velocity through an electromagnetically “empty” microwave cavity can be calculated numerically. We give an estimation of the energy deposited by a charged particle into a particular mode. Numerical examples are given for beta emitters and two particular cases: interaction with a field free cavity and interaction with a cavity which already contains an electromagnetic field. Each particle delivers a certain amount of energy related to the modal R/Q value of the cavity. The transferred energy is a function of the particles trajectory and its velocity. It results in a resonant response of the cavity, which can be observed using a sensitive microwave receiver, provided that the deposited energy is significantly above the single photon threshold.
Analytical modeling of printed metasurface cavities for computational imaging
F. Imani, Mohammadreza; Sleasman, Timothy; Gollub, Jonah N.; Smith, David R.
2016-10-01
We derive simple analytical expressions to model the electromagnetic response of an electrically large printed cavity. The analytical model is then used to develop printed cavities for microwave imaging purposes. The proposed cavity is excited by a cylindrical source and has boundaries formed by subwavelength metallic cylinders (vias) placed at subwavelength distances apart. Given their small size, the electric currents induced on the vias are assumed to have no angular dependence. Applying this approximation simplifies the electromagnetic problem to a matrix equation which can be solved to directly compute the electric current induced on each via. Once the induced currents are known, the electromagnetic field inside the cavity can be computed for every location. We verify the analytical model by comparing its prediction to full-wave simulations. To utilize this cavity in imaging settings, we perforate one side of the printed cavity with radiative slots such that they act as the physical layer of a computational imaging system. An analytical approximation for the slots is also developed, enabling us to obtain estimates of the cavity performance in imaging scenarios. This ability allows us to make informed decisions on the design of the printed metasurface cavity. The utility of the proposed model is further highlighted by demonstrating high-quality experimental imaging; performance metrics, which are consistent between theory and experiment, are also estimated.
Effects of mode degeneracy in the LIGO Livingston Observatory recycling cavity
Gretarsson, Andri M; Frolov, Valery; O'Reilly, Brian; Fritschel, Peter K
2007-01-01
We analyze the electromagnetic fields in a Pound-Drever-Hall locked, marginally unstable, Fabry-Perot cavity as a function of small changes in the cavity length during resonance. More specifically, we compare the results of a detailed numerical model with the behavior of the recycling cavity of the Laser Interferometer Gravitational-wave Observatory (LIGO) detector that is located in Livingston, Louisiana. In the interferometer's normal mode of operation, the recycling cavity is stabilized by inducing a thermal lens in the cavity mirrors with an external CO2 laser. During the study described here, this thermal compensation system was not operating, causing the cavity to be marginally optically unstable and cavity modes to become degenerate. In contrast to stable optical cavities, the modal content of the resonating beam in the uncompensated recycling cavity is significantly altered by very small cavity length changes. This modifies the error signals used to control the cavity length in such a way that the zer...
Cavities/tooth decay Overview By Mayo Clinic Staff Cavities are permanently damaged areas in the hard surface of your teeth ... into tiny openings or holes. Cavities, also called tooth decay or caries, are caused by a combination of ...
Cermak, Daniel; Okutsu, Ayaka; Hasse, Stina
2015-01-01
Electromagnetic Landscape demonstrates in direct, tangible and immediate ways effects of the disruption of the familiar. An ubiquitous technological medium, FM radio, is turned into an alien and unfamiliar one. Audience participation, the environment, radio signals and noise create a site...
Computational Electromagnetics
Rylander, Thomas; Bondeson, Anders
2013-01-01
Computational Electromagnetics is a young and growing discipline, expanding as a result of the steadily increasing demand for software for the design and analysis of electrical devices. This book introduces three of the most popular numerical methods for simulating electromagnetic fields: the finite difference method, the finite element method and the method of moments. In particular it focuses on how these methods are used to obtain valid approximations to the solutions of Maxwell's equations, using, for example, "staggered grids" and "edge elements." The main goal of the book is to make the reader aware of different sources of errors in numerical computations, and also to provide the tools for assessing the accuracy of numerical methods and their solutions. To reach this goal, convergence analysis, extrapolation, von Neumann stability analysis, and dispersion analysis are introduced and used frequently throughout the book. Another major goal of the book is to provide students with enough practical understan...
Aldridge, David F.
2014-11-01
A reciprocity theorem is an explicit mathematical relationship between two different wavefields that can exist within the same space - time configuration. Reciprocity theorems provi de the theoretical underpinning for mod ern full waveform inversion solutions, and also suggest practical strategies for speed ing up large - scale numerical modeling of geophysical datasets . In the present work, several previously - developed electromagnetic r eciprocity theorems are generalized to accommodate a broader range of medi um, source , and receiver types. Reciprocity relations enabling the interchange of various types of point sources and point receivers within a three - dimensional electromagnetic model are derived. Two numerical modeling algorithms in current use are successfully tested for adherence to reciprocity. Finally, the reciprocity theorem forms the point of departure for a lengthy derivation of electromagnetic Frechet derivatives. These mathe matical objects quantify the sensitivity of geophysical electromagnetic data to variatio ns in medium parameters, and thus constitute indispensable tools for solution of the full waveform inverse problem. ACKNOWLEDGEMENTS Sandia National Labor atories is a multi - program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the US Department of Energy's National Nuclear Security Administration under contract DE - AC04 - 94AL85000. Signif icant portions of the work reported herein were conducted under a Cooperative Research and Development Agreement (CRADA) between Sandia National Laboratories (SNL) and CARBO Ceramics Incorporated. The author acknowledges Mr. Chad Cannan and Mr. Terry Pa lisch of CARBO Ceramics, and Ms. Amy Halloran, manager of SNL's Geophysics and Atmospheric Sciences Department, for their interest in and encouragement of this work. Special thanks are due to Dr . Lewis C. Bartel ( recently retired from Sandia National Labo ratories
Ida, Nathan
2015-01-01
This book provides students with a thorough theoretical understanding of electromagnetic field equations and it also treats a large number of applications. The text is a comprehensive two-semester textbook. The work treats most topics in two steps – a short, introductory chapter followed by a second chapter with in-depth extensive treatment; between 10 to 30 applications per topic; examples and exercises throughout the book; experiments, problems and summaries. The new edition includes: updated end of chapter problems; a new introduction to electromagnetics based on behavior of charges; a new section on units; MATLAB tools for solution of problems and demonstration of subjects; most chapters include a summary. The book is an undergraduate textbook at the Junior level, intended for required classes in electromagnetics. It is written in simple terms with all details of derivations included and all steps in solutions listed. It requires little beyond basic calculus and can be used for self-study. The weal...
Electromagnetic theory for electromagnetic compatibility engineers
Toh, Tze-Chuen
2013-01-01
Engineers and scientists who develop and install electronic devices and circuits need to have a solid understanding of electromagnetic theory and the electromagnetic behavior of devices and circuits. In particular, they must be well-versed in electromagnetic compatibility, which minimizes and controls the side effects of interconnected electric devices. Designed to entice the practical engineer to explore some worthwhile mathematical methods, and to reorient the theoretical scientist to industrial applications, Electromagnetic Theory for Electromagnetic Compatibility Engineers is based on the
Yang Juan; Wang Yu-Quan; Ma Yan-Jie; Li Peng-Fei; Yang Le; Wang Yang; He Guo-Qiang
2013-01-01
A microwave thruster system that can convert microwave power directly to thrust without a gas propellant is developed.In the system,a cylindrical tapered resonance cavity and a magnetron microwave source are used respectively as the thruster cavity and the energy source to generate the electromagnetic wave.The wave is radiated into and then reflected from the cavity to form a pure standing wave with non-uniform electromagnetic pressure distribution.Consequently,a net electromagnetic thrust exerted on the axis of the thruster cavity appears,which is demonstrated through theoretical calculation based on the electromagnetic theory.The net electromagnetic thrust is also experimentally measured in the range from 70 mN to 720 mN when the microwave output power is from 80 W to 2500 W.
Calaga, R; Burt, G; Ratti, A
2015-01-01
The HL-LHC upgrade will use deflecting (or crab) cavities to compensate for geometric luminosity loss at low β* and non-zero crossing angle. A local scheme with crab cavity pairs across the IPs is used employing compact crab cavities at 400 MHz. Design of the cavities, the cryomodules and the RF system is well advanced. The LHC crab cavities will be validated initially with proton beam in the SPS.
805 MHz and 201 MHz RF cavity development for MUCOOL
Li, Derun [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Corlett, J [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Ladran, A [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); MacGill, R [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Wallig, J [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Zisman, M [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Moretti, A [Fermi National Accelerator Laboratory, Batavia, IL 60510 (United States); Rowe, A [Fermi National Accelerator Laboratory, Batavia, IL 60510 (United States); Qian, Z B [Fermi National Accelerator Laboratory, Batavia, IL 60510 (United States); Wu, V [Fermi National Accelerator Laboratory, Batavia, IL 60510 (United States); Rimmer, R A [Jefferson Lab, Newport News, VA 23606 (United States); Norem, J [Argonne National Laboratory, Argonne, IL 60439 (United States); Summers, D [University of Mississippi at Oxford, MS 38677 (United States); Torun, Y [Illinois Institute of Technology, Chicago, IL 60616 (United States)
2003-08-01
A muon cooling channel calls for very high accelerating gradient RF structures to restore the energy lost by muons in the absorbers. The RF structures have to be operated in a strong magnetic field and thus the use of superconducting RF cavities is excluded. To achieve a high shunt impedance while maintaining a large enough aperture to accommodate a large transverse emittance muon beam, the cavity design adopted is a pillbox-like geometry with thin Be foils to terminate the electromagnetic field at the cavity iris. The possibility of using grids of thin-walled metallic tubes for the termination is also being explored. Many of the RF-related issues for muon cooling channels are being studied both theoretically and experimentally using an 805 MHz cavity that has a pillbox-like geometry with thin Be windows to terminate the cavity aperture. The design and performance of this cavity are reported here. High-power RF tests of the 805 MHz cavity are in progress at Lab G in Fermilab. The cavity has exceeded its design gradient of 30 MV m{sup -1}, reaching 34 MV m{sup -1} without external magnetic field. No surface damage was observed at this gradient. The cavity is currently under conditioning at Lab G with an external magnetic field of 2.5 T. We also present here a 201 MHz cavity design for muon cooling channels. The proposed cavity design is also suitable for use in a proof-of-principle muon ionization cooling experiment.
Sobouti, Yousef
2013-01-01
That the universal constancy of the speed of light is a logical consequence of Maxwell's equations is common knowledge. Here we show that the converse is also true. That is, electromagnetism (EM) and electrodynamics (ED) in all their details can be derived from the simple assumption that the speed of light is a universal constant. The consequences reach far. Conventional EM and ED are observation based. The alternative we propose spares all observational foundations of EM, only to reintroduce them as theoretically derived and empiricism-free laws of Nature. Simplicity is beauty and there are merits to it. For instance, if $\
Temperature switching of cavity modes in InN microcrystals
Kazanov, D. R., E-mail: kazanovdr@gmail.com; Kaibyshev, V. H.; Davydov, V. Yu.; Smirnov, A. N.; Jmerik, V. N.; Kuznetsova, N. V.; Kopiev, P. S.; Ivanov, S. V.; Shubina, T. V. [Russian Academy of Sciences, Ioffe Physical–Technical Institute (Russian Federation)
2015-11-15
InN optical cavities supporting low-order whispering-gallery modes up to room temperature are formed by molecular-beam epitaxy on patterned substrates. The observed switching of the mode type with increasing temperature is explained in terms of changes in the optical parameters due to a shift of the absorption edge and modification of its shape. Modeling taking into account a variation in the refractive index reproduces the typical distributions of the electromagnetic-field intensity in the cavities.
What Are Electromagnetic Fields?
... sources of electromagnetic fields Besides natural sources the electromagnetic spectrum also includes fields generated by human-made sources: ... ability to break bonds between molecules. In the electromagnetic spectrum, gamma rays given off by radioactive materials, cosmic ...
Coupled external cavity photonic crystal enhanced fluorescence.
Pokhriyal, Anusha; Lu, Meng; Ge, Chun; Cunningham, Brian T
2014-05-01
We report a fundamentally new approach to enhance fluorescence in which surface adsorbed fluorophore-tagged biomolecules are excited on a photonic crystal surface that functions as a narrow bandwidth and tunable mirror of an external cavity laser. This scheme leads to ∼10× increase in the electromagnetic enhancement factor compared to ordinary photonic crystal enhanced fluorescence. In our experiments, the cavity automatically tunes its lasing wavelength to the resonance wavelength of the photonic crystal, ensuring optimal on-resonance coupling even in the presence of variable device parameters and variations in the density of surface-adsorbed capture molecules. We achieve ∼10(5) × improvement in the limit of detection of a fluorophore-tagged protein compared to its detection on an unpatterned glass substrate. The enhanced fluorescence signal and easy optical alignment make cavity-coupled photonic crystals a viable approach for further reducing detection limits of optically-excited light emitters that are used in biological assays.
Gravito-electromagnetism versus electromagnetism
Tartaglia, A; Ruggiero, M L [Dipartimento di Fisica, Politecnico and INFN, 10129 Torino (Italy)
2004-03-01
The properties of the gravito-magnetic interaction in non-stationary conditions are discussed. A direct deduction of the equivalent Faraday-Henry law is given. A comparison is made between gravito-magnetic and electromagnetic induction, and it is shown that there is no Meissner-like effect for superfluids in the field of massive spinning bodies. The impossibility of stationary motions in directions not along the lines of the gravito-magnetic field is found. Finally the results are discussed in relation to the behaviour of superconductors.
Atom-probe tomography analyses of niobium superconducting RF cavity materials
Sebastian, J.T. [Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208-3108 (United States); Seidman, D.N. [Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208-3108 (United States); Yoon, K.E. [Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208-3108 (United States)]. E-mail: megabass@northwestern.edu; Bauer, P. [Fermi National Accelerator Laboratory, Batavia, IL 60510 (United States); Reid, T. [Fermi National Accelerator Laboratory, Batavia, IL 60510 (United States); Boffo, C. [Fermi National Accelerator Laboratory, Batavia, IL 60510 (United States); Norem, J. [Argonne National Laboratory, Argonne, IL 60439 (United States)
2006-07-15
We present the first atom-probe tomographic (APT) measurements of niobium superconducting RF (SCRF) cavity materials. APT involves the atom-by-atom dissection of sharply pointed niobium tips, along with their niobium oxide coatings, via the application of a high-pulsed electric field and the measurement of each ion's mass-to-charge state ratio (m/n) with time-of-flight (TOF) mass spectrometry. The resulting atomic reconstructions, typically containing at least 10{sup 5} atoms and with typical dimensions of 10{sup 5} nm{sup 3} (or less), show the detailed, nanoscale chemistry of the niobium oxide coatings, and of the underlying high-purity niobium metal. Our initial results show a nanochemically smooth transition through the oxide layer from near-stoichiometric Nb{sub 2}O{sub 5} at the surface to near-stoichiometric Nb{sub 2}O as the underlying metal is approached (after {approx}10 nm of surface oxide). The underlying metal, in the near-oxide region, contains a significant amount of interstitially dissolved oxygen ({approx}5-10 at.%), as well as a considerable amount of dissolved hydrogen. The experimental results are interpreted in light of current models of oxide and sub-oxide formation in the Nb-O system.
Analytic Solution of the Electromagnetic Eigenvalues Problem in a Cylindrical Resonator
Checchin, Mattia
2016-01-01
Resonant accelerating cavities are key components in modern particles accelerating facilities. These take advantage of electromagnetic fields resonating at microwave frequencies to accelerate charged particles. Particles gain finite energy at each passage through a cavity if in phase with the resonating field, reaching energies even of the order of $TeV$ when a cascade of accelerating resonators are present. In order to understand how a resonant accelerating cavity transfers energy to charged particles, it is important to determine how the electromagnetic modes are exited into such resonators. In this paper we present a complete analytical calculation of the resonating fields for a simple cylindrical-shaped cavity.
Leaky Modes of Dielectric Cavities
Mansuripur, Masud; Jakobsen, Per
2016-01-01
In the absence of external excitation, light trapped within a dielectric medium generally decays by leaking out (and also by getting absorbed within the medium). We analyze the leaky modes of a parallel-plate slab, a solid glass sphere, and a solid glass cylinder, by examining those solutions of Maxwell's equations (for dispersive as well as non-dispersive media) which admit of a complex-valued oscillation frequency. Under certain circumstances, these leaky modes constitute a complete set into which an arbitrary distribution of the electromagnetic field residing inside a dielectric body can be expanded. We provide completeness proofs, and also present results of numerical calculations that illustrate the relationship between the leaky modes and the resonances of dielectric cavities formed by a simple parallel-plate slab, a glass sphere, and a glass cylinder.
Hu, Can-Ming
2015-01-01
Merging the progress of spintronics with the advancement in cavity quantum electrodynamics and cavity polaritons, a new field of Cavity Spintronics is forming, which connects some of the most exciting modern physics, such as quantum information and quantum optics, with one of the oldest science on the earth, the magnetism.
Design of a Cavity of Drift Tube Linac
WANG; Xiu-long; LV; Wei-xing; LI; Jin-hai; HUANG; Jun; WU; Qing-feng
2013-01-01
The drift tube Linac(DTL)is used as accelerating of low energy proton beam with high intensity.Its operating frequency is 325 MHz with handling power of 2.5 kW.The cavity of DTL consists of circularwaveguide,drift tube,post coupler and tuner.First,the beam parameters of the cavity of DTL is calculated by using beam dynamic codes,and then the electromagnetic field distribution and RF parameters of the cavity of DTL is calculated by using
HFSS Simulation on Cavity Coupling for Axion Detecting Experiment
Yeo, Beomki
2015-01-01
In the resonant cavity experiment, it is vital maximize signal power at detector with the minimized reflection from source. Return loss is minimized when the impedance of source and cavity are matched to each other and this is called impedance matching. Establishing tunable antenna on source is required to get a impedance matching. Geometry and position of antenna is varied depending on the electromagnetic eld of cavity. This research is dedicated to simulation to nd such a proper design of coupling antenna, especially for axion dark matter detecting experiment. HFSS solver was used for the simulation.
Electromagnetic topology: Characterization of internal electromagnetic coupling
Parmantier, J. P.; Aparicio, J. P.; Faure, F.
1991-01-01
The main principles are presented of a method dealing with the resolution of electromagnetic internal problems: Electromagnetic Topology. A very interesting way is to generalize the multiconductor transmission line network theory to the basic equation of the Electromagnetic Topology: the BLT equation. This generalization is illustrated by the treatment of an aperture as a four port junction. Analytical and experimental derivations of the scattering parameters are presented. These concepts are used to study the electromagnetic coupling in a scale model of an aircraft, and can be seen as a convenient means to test internal electromagnetic interference.
Supersonic flows over cavities
Tianwen FANG; Meng DING; Jin ZHOU
2008-01-01
The characteristics of supersonic cold flows over cavities were investigated experimentally and numer-ically, and the effects of cavities of different sizes on super-sonic flow field were analyzed. The results indicate that the ratio of length to depth L/D within the range of 5-9 has little relevance to integral structures of cavity flow. The bevel angle of the rear wall does not alter the overall structure of the cavity flow within the range of 30°-60°, but it can exert obvious effect on the evolvement of shear layer and vortexes in cavities.
Gamp, A
2011-01-01
We begin by giving a description of the rf generator-cavity-beam coupled system in terms of basic quantities. Taking beam loading and cavity detuning into account, expressions for the cavity impedance as seen by the generator and as seen by the beam are derived. Subsequently methods of beam-loading compensation by cavity detuning, rf feedback, and feed-forward are described. Examples of digital rf phase and amplitude control for the special case of superconducting cavities are also given. Finally, a dedicated phase loop for damping synchrotron oscillations is discussed.
Karapetyan, G. G.
2002-01-01
A novel conception of "sensitive mode" (SM) is proposed to apply in gravitational-wave advanced interferometer configuration. The SM is resonant oscillation of electromagnetic field in "white-light cavity", where the resonance line is broadened without decreasing cavity quality. The frequency of the SM is greatly susceptible to the change of cavity length, and the SM is established in a cavity with time constant smaller than a conventional mode. Due to these advantages the sensitivity and ban...
Electrodynamical Light Trapping Using Whispering-Gallery Resonances in Hyperbolic Cavities
Chihhui Wu
2014-04-01
Full Text Available We theoretically study spherical cavities composed of hyperbolic metamaterials with indefinite permittivity tensors. Such cavities are capable of electrodynamically confining fields with deep subwavelength cavity sizes. The supported resonant modes are analogous to the whispering-gallery modes found in dielectric microcavities with much larger physical sizes. Because of the nature of electrodynamical confinement, these hyperbolic metamaterial cavities exhibit quality factors higher than predicted in the electrostatic limit. In addition, confining electromagnetic fields into the small cavities results in an extremely high photonic local density of states.
Einstein-Maxwell equations for asymmetric resonant cavities
Frasca, Marco
2015-01-01
We analyze the behavior of electromagnetic fields inside a resonant cavity by solving Einstein--Maxwell field equations. It is shown that the modified geometry of space-time inside the cavity due to a propagating mode can affect the propagation of a laser beam. It is seen that components of laser light with a shifted frequency appear originating from the coupling between the laser field and the mode cavity due to gravity. The analysis is extended to the case of an asymmetric resonant cavity taken to be a truncated cone. It is shown that a proper choice of the geometrical parameters of the cavity and dielectric can make the gravitational effects significant for an interferometric setup. This could make possible to realize table-top experiments involving gravitational effects.
RESONANT CAVITY EXCITATION SYSTEM
Baker, W.R.; Kerns, Q.A.; Riedel, J.
1959-01-13
An apparatus is presented for exciting a cavity resonator with a minimum of difficulty and, more specifically describes a sub-exciter and an amplifier type pre-exciter for the high-frequency cxcitation of large cavities. Instead of applying full voltage to the main oscillator, a sub-excitation voltage is initially used to establish a base level of oscillation in the cavity. A portion of the cavity encrgy is coupled to the input of the pre-exciter where it is amplified and fed back into the cavity when the pre-exciter is energized. After the voltage in the cavity resonator has reached maximum value under excitation by the pre-exciter, full voltage is applied to the oscillator and the pre-exciter is tunned off. The cavity is then excited to the maximum high voltage value of radio frequency by the oscillator.
GENERAL RELATIVITY AND DYNAMICAL MODEL OF ELECTROMAGNETIC DRIVE
Trunev A. P.
2016-02-01
Full Text Available The article discusses the dynamic model of the rocket motor electromagnetic type, consisting of a source of electromagnetic waves of radio frequency band and a conical cavity in which electromagnetic waves are excited. The processes of excitation of electromagnetic oscillations in a cavity with conducting walls, as well as the waves of the YangMills field are investigated. The multi-dimensional transient numerical model describing the processes of electromagnetic oscillations in a cavity with conducting wall created. Separately, the case of standing waves in the cavity with conducting walls considered. It is shown that the oscillations mode in the conducting resonator different from that in an ideal resonator, both in steady and unsteady processes. The mechanism of formation of traction for the changes in the space-time metric, the contribution of particle currents, the Yang-Mills and electromagnetic field proposed. It is shown that the Yang-Mills field calls the change of the dielectric constant, which leads to a change in the capacitance of the resonator. Thus, the parametric resonance occurs in the system, which leads to a strengthening of the Yang-Mills amplitude, and to the emergence of traction. We have developed a dynamic model, which enables optimal traction on a significant number of parameters. It was found that the thrust increases in the Yang-Mills field near the main resonance frequency. A model describing the excitation and emission of nonlinear waves of the Yang-Mills field was proposed. It is shown that nonlinear waves of the Yang-Mills field more effectively carry the momentum from the system in comparison with electromagnetic waves, and it explains the significant increase by several orders of thrust in the engines of the electromagnetic type, compared with the photon rocket
Topological Foundations of Electromagnetism
Barrett, Terrence W
2008-01-01
Topological Foundations of Electromagnetism seeks a fundamental understanding of the dynamics of electromagnetism; and marshals the evidence that in certain precisely defined topological conditions, electromagnetic theory (Maxwell's theory) must be extended or generalized in order to provide an explanation and understanding of, until now, unusual electromagnetic phenomena. Key to this generalization is an understanding of the circumstances under which the so-called A potential fields have physical effects. Basic to the approach taken is that the topological composition of electromagnetic field
Cavity turnover and equilibrium cavity densities in a cottonwood bottomland
Sedgwick, James A.; Knopf, Fritz L.
1992-01-01
A fundamental factor regulating the numbers of secondary cavity nesting (SCN) birds is the number of extant cavities available for nesting. The number of available cavities may be thought of as being in an approximate equilibrium maintained by a very rough balance between recruitment and loss of cavities. Based on estimates of cavity recruitment and loss, we ascertained equilibrium cavity densities in a mature plains cottonwood (Populus sargentii) bottomland along the South Platte River in northeastern Colorado. Annual cavity recruitment, derived from density estimates of primary cavity nesting (PCN) birds and cavity excavation rates, was estimated to be 71-86 new cavities excavated/100 ha. Of 180 active cavities of 11 species of cavity-nesting birds found in 1985 and 1986, 83 were no longer usable by 1990, giving an average instantaneous rate of cavity loss of r = -0.230. From these values of cavity recruitment and cavity loss, equilibrium cavity density along the South Platte is 238-289 cavities/100 ha. This range of equilibrium cavity density is only slightly above the minimum of 205 cavities/100 ha required by SCN's and suggests that cavity availability may be limiting SCN densities along the South Platte River. We submit that snag management alone does not adequately address SCN habitat needs, and that cavity management, expressed in terms of cavity turnover and cavity densities, may be more useful.
Kolm, H.; Mongeau, P.; Williams, F.
1980-09-01
Recent advances in energy storage, switching and magnet technology make electromagnetic acceleration a viable alternative to chemical propulsion for certain tasks, and a means to perform other tasks not previously feasible. Applications include the acceleration of gram-size particles for hypervelocity research and the initiation of fusion by impact, a replacement for chemically propelled artillery, the transportation of cargo and personnel over inaccessible terrain, and the launching of space vehicles to supply massive space operations, and for the disposal of nuclear waste. The simplest launcher of interest is the railgun, in which a short-circuit slide or an arc is driven along two rails by direct current. The most sophisticated studied thus far is the mass driver, in which a superconducting shuttle bucket is accelerated by a line of pulse coils energized by capacitors at energy conversion efficiencies better than 90%. Other accelerators of interest include helical, brush-commutated motors, discrete coil arc commutated drivers, flux compression momentum transformers, and various hybrid electrochemical devices.
Theory of RF superconductivity for resonant cavities
Gurevich, Alex
2017-03-01
An overview of a theory of electromagnetic response of superconductors in strong radio-frequency (RF) electromagnetic fields is given with the emphasis on applications to superconducting resonant cavities for particle accelerators. The paper addresses fundamentals of the BCS surface resistance, the effect of subgap states and trapped vortices on the residual surface resistance at low RF fields, and a nonlinear surface resistance at strong fields, particularly the effect of the RF field suppression of the surface resistance. These issues are essential for the understanding of the field dependence of high quality factors Q({B}a)∼ {10}10{--}{10}11 achieved on the Nb cavities at 1.3–2 K in strong RF fields B a close to the depairing limit, and the extended Q({B}a) rise which has been observed on Ti and N-treated Nb cavities. Possible ways of further increase of Q({B}a) and the breakdown field by optimizing impurity concentration at the surface and by multilayer nanostructuring with materials other than Nb are discussed.
Cascaded optical transparency in multimode-cavity optomechanical systems.
Fan, Linran; Fong, King Y; Poot, Menno; Tang, Hong X
2015-01-14
Electromagnetically induced transparency has great theoretical and experimental importance in many areas of physics, such as atomic physics, quantum optics and, more recent, cavity optomechanics. Optical delay is the most prominent feature of electromagnetically induced transparency, and in cavity optomechanics, the optical delay is limited by the mechanical dissipation rate of sideband-resolved mechanical modes. Here we demonstrate a cascaded optical transparency scheme by leveraging the parametric phonon-phonon coupling in a multimode optomechanical system, where a low damping mechanical mode in the unresolved-sideband regime is made to couple to an intermediate, high-frequency mechanical mode in the resolved-sideband regime of an optical cavity. Extended optical delay and higher transmission as well as optical advancing are demonstrated. These results provide a route to realize ultra-long optical delay, indicating a significant step towards integrated classical and quantum information storage devices.
Yuanxin WANG; Wensheng FAN; Weiyan PAN; Hongqi ZHANG
2008-01-01
The spherical harmonic series expression of electromagnetic fields excited by ELF/SLF vertical electric dipole in the spherical earth-ionosphere cavity is derived when the earth and ionosphere are regarded as non-ideal conductors. A method of speeding numerical convergence has been presented. The electromagnetic fields in the cavity are calculated by this algorithm, and the results show that the electromagnetic fields between the earth and the ionosphere are the sum of two traveling waves in the SLF band. Moreover, the results are in complete agreement with that of the well-known spherical second-order approximation in the SLF band. The electromagnetic fields in the cavity are a type of standing wave in the ELF band and the variation of the amplitude versus frequency coincides with Schumann's resonance.
LEP copper accelerating cavities
Laurent Guiraud
1999-01-01
These copper cavities were used to generate the radio frequency electric field that was used to accelerate electrons and positrons around the 27-km Large Electron-Positron (LEP) collider at CERN, which ran from 1989 to 2000. The copper cavities were gradually replaced from 1996 with new superconducting cavities allowing the collision energy to rise from 90 GeV to 200 GeV by mid-1999.
Benchmark of Different Electromagnetic Codes for the High Frequency Calculation
Kai Tian, Haipeng Wang, Frank Marhauser, Guangfeng Cheng, Chuandong Zhou
2009-05-01
In this paper, we present benchmarking results for highclass 3D electromagnetic (EM) codes in designing RF cavities today. These codes include Omega3P [1], VORPAL [2], CST Microwave Studio [3], Ansoft HFSS [4], and ANSYS [5]. Two spherical cavities are selected as the benchmark models. We have compared not only the accuracy of resonant frequencies, but also that of surface EM fields, which are critical for superconducting RF cavities. By removing degenerated modes, we calculate all the resonant modes up to 10 GHz with similar mesh densities, so that the geometry approximation and field interpolation error related to the wavelength can be observed.
Controlling spin relaxation with a cavity
Bienfait, A.; Pla, J. J.; Kubo, Y.; Zhou, X.; Stern, M.; Lo, C. C.; Weis, C. D.; Schenkel, T.; Vion, D.; Esteve, D.; Morton, J. J. L.; Bertet, P.
2016-03-01
Spontaneous emission of radiation is one of the fundamental mechanisms by which an excited quantum system returns to equilibrium. For spins, however, spontaneous emission is generally negligible compared to other non-radiative relaxation processes because of the weak coupling between the magnetic dipole and the electromagnetic field. In 1946, Purcell realized that the rate of spontaneous emission can be greatly enhanced by placing the quantum system in a resonant cavity. This effect has since been used extensively to control the lifetime of atoms and semiconducting heterostructures coupled to microwave or optical cavities, and is essential for the realization of high-efficiency single-photon sources. Here we report the application of this idea to spins in solids. By coupling donor spins in silicon to a superconducting microwave cavity with a high quality factor and a small mode volume, we reach the regime in which spontaneous emission constitutes the dominant mechanism of spin relaxation. The relaxation rate is increased by three orders of magnitude as the spins are tuned to the cavity resonance, demonstrating that energy relaxation can be controlled on demand. Our results provide a general way to initialize spin systems into their ground state and therefore have applications in magnetic resonance and quantum information processing. They also demonstrate that the coupling between the magnetic dipole of a spin and the electromagnetic field can be enhanced up to the point at which quantum fluctuations have a marked effect on the spin dynamics; as such, they represent an important step towards the coherent magnetic coupling of individual spins to microwave photons.
Optical cavity resonator in an expanding universe
Kopeikin, Sergei
2014-01-01
We study evolution of frequency of a standing electromagnetic (EM) wave in a resonant optical cavity placed to the expanding manifold described by the Robertson-Walker metric. One builds a local coordinate system in which spacetime is locally Minkowskian. However, due to the conformal nature of the Robertson-Walker metric the conventional transformation to the local inertial coordinates introduces ambiguity in the physical interpretation of the local time coordinate. Therefore, contrary to a common-sense expectation, a straightforward implementation of EEP alone does not allow us to decide whether atomic clocks ticks at the same rate as the clocks based on EM modes of a cavity. To resolve the ambiguity we analyzed the cavity rigidity and the oscillation of its EM modes in an expanding universe by employing the Maxwell equations. We found out that both the size of the cavity and the EM frequency experience an adiabatic drift in conformal coordinates as the universe expands. We set up the oscillation equation f...
Brahms, N
2010-01-01
The dynamics of a large quantum spin coupled parametrically to an optical resonator is treated in analogy with the motion of a cantilever in cavity optomechanics. New spin optodynamic phenonmena are predicted, such as cavity-spin bistability, optodynamic spin-precession frequency shifts, coherent amplification and damping of spin, and the spin optodynamic squeezing of light.
1980-01-01
One of the SPS acceleration cavities (200 MHz, travelling wave structure). On the ceiling one sees the coaxial transmission line which feeds the power from the amplifier, located in a surface building above, to the upstream end of the cavity. See 7603195 for more details, 7411032 for the travelling wave structure, and also 8104138, 8302397.
Superconducting cavities for LEP
1983-01-01
Above: a 350 MHz superconducting accelerating cavity in niobium of the type envisaged for accelerating electrons and positrons in later phases of LEP. Below: a small 1 GHz cavity used for investigating the surface problems of superconducting niobium. Albert Insomby stays on the right. See Annual Report 1983 p. 51.
CERN PhotoLab
1981-01-01
One of the SPS accelerating cavities (200 MHz, travelling wave structure). The power that is fed into the upstream end of the cavity is extracted at the downstream end and sent into a dump load. See 7603195 for more details, 7411032 for the travelling wave structure, and also 8011289, 8302397.
Electromagnetic Education in India
Bajpai, Shrish; Asif, Siddiqui Sajida; Akhtar, Syed Adnan
2016-01-01
Out of the four fundamental interactions in nature, electromagnetics is one of them along with gravitation, strong interaction and weak interaction. The field of electromagnetics has made much of the modern age possible. Electromagnets are common in day-to-day appliances and are becoming more conventional as the need for technology increases.…
Formal analysis of electromagnetic optics
Khan-Afshar, Sanaz; Hasan, Osman; Tahar, Sofiène
2014-09-01
Optical systems are increasingly being used in safety-critical applications. Due to the complexity and sensitivity of optical systems, their verification raises many challenges for engineers. Traditionally, the analysis of such systems has been carried out by paper-and-pencil based proofs and numerical computations. However, these techniques cannot provide accurate results due to the risk of human error and inherent approximations of numerical algorithms. In order to overcome these limitations, we propose to use theorem proving (i.e., a computer-based technique that allows to express mathematical expressions and reason about their correctness by taking into account all the details of mathematical reasoning) as a complementary approach to improve optical system analysis. This paper provides a higher-order logic (a language used to express mathematical theories) formalization of electromagnetic optics in the HOL Light theorem prover. In order to demonstrate the practical effectiveness of our approach, we present the analysis of resonant cavity enhanced photonic devices.
Electromagnetic control of oscillating flows in a cavity
Kalter, R.
2015-01-01
In continuous steel casting, liquid steel flows turbulently through a submerged nozzle into a thin, vertical mould. In the mould the liquid steel is cooled, such that it solidifies and plate steel is formed. On top of the liquid steel in the mould, a slag layer is present and due to the turbulent be
Low- to medium-β cavities for heavy ion acceleration
Facco, Alberto
2017-02-01
Acceleration of low- and medium-β heavy ions by means of superconducting (SC) linear accelerators (linacs) was made possible by the development, during four decades, of a particular class of cavities characterized by low operation frequency, several different shapes and different electromagnetic modes of operation. Their performance, initially rather poor in operating accelerators, have steadily increased along with the technological progress and nowadays the gap with the high-β, elliptical cavities is close to be filled. Initially confined to a very small number of applications, this family of cavities evolved in many directions becoming one of the most widespread in linacs. Nowadays it is present in the majority of superconducting radio-frequency ion linac projects worldwide. An overview of low- and medium-β SC cavities for heavy ions, focused on their recent evolution and achievements, will be given.
Zhang, Zhengren, E-mail: zhrenzhang@126.com [School of Science, Chongqing Jiaotong University, Chongqing 400074 (China); Zhang, Liwei [School of Physics and Chemistry, Henan Polytechnic University, Jiaozuo 454000 (China); Yin, Pengfei; Han, Xiangyu [School of Science, Chongqing Jiaotong University, Chongqing 400074 (China)
2014-08-01
We investigate theoretically the generation process of coupled resonator-induced transparency (CRIT) in surface plasmon polariton gap waveguide system containing two side-coupled cavities, which locate at a symmetric position. The CRIT is original from the destructive interference of the two detuned cavities. In contrast with the existing electromagnetically induced transparency (EIT) schemes, the occurrence of the CRIT is caused by the two radiative cavities in waveguide, instead of interference between a dark cavity and radiative cavity. This behavior mimics the quantum interference between two direct excitation pathways in a three-level V-type atom. The transmission lineshape can be tuned between an EIT-like resonant peak and a Lorentzian-like resonant dip by tailoring the detuning of the two cavities. Moreover, we also find that the transparency peak moves to high frequency with a line shift and its Q factor decreases with the increase of coupling distance between the cavities and waveguide.
Geophysical observations at cavity collapse
Jousset, Philippe; Bazargan-Sabet, Behrooz; Lebert, François; Bernardie, Séverine; Gourry, Jean-Christophe
2010-05-01
In Lorraine region (France) salt layers at about 200 meters depth are exploited by Solvay using solution mining methodology which consists in extracting the salt by dissolution, collapsing the cavern overburden during the exploitation phase and finally reclaiming the landscape by creating a water area. In this process, one of the main challenges for the exploiting company is to control the initial 120-m diameter collapse so as to minimize possible damages. In order to detect potential precursors and understand processes associated with such collapses, a wide series of monitoring techniques including micro seismics, broad-band seismology, hydro-acoustic, electromagnetism, gas probing, automatic leveling, continuous GPS, continuous gravity and borehole extensometry was set-up in the frame of an in-situ study carried out by the "Research Group for the Impact and Safety of Underground Works" (GISOS, France). Equipments were set-up well before the final collapse, giving a unique opportunity to analyze a great deal of information prior to and during the collapse process which has been successfully achieved on February the 13th, 2009 by controlling the cavity internal pressure. In this work, we present the results of data recorded by a network of 3 broadband seismometers, 2 accelerometers, 2 tilt-meters and a continuously gravity meter. We relate the variations of the brine pumping rate with the evolutions of the induced geophysical signals and finally we propose a first mechanical model for describing the controlled collapse. Beyond the studied case, extrapolation of the results obtained might contribute to the understanding of uncontrolled cavity collapses, such as pit-craters or calderas at volcanoes.
1979-01-01
This picture shows one of the 2 new cavities installed in 1978-1979. The main RF-system of the SPS comprises four cavities: two of 20 m length and two of 16.5 m length. They are all installed in one long straight section (LSS 3). These cavities are of the travelling-wave type operating at a centre frequency of 200.2 MHz. They are wideband, filling time about 700 ns and untuned. The power amplifiers, using tetrodes are installed in a surface building 200 m from the cavities. Initially only two cavities were installed, a third cavity was installed in 1978 and a forth one in 1979. The number of power amplifiers was also increased: to the first 2 MW plant a second 2 MW plant was added and by end 1979 there were 8 500 kW units combined in pairs to feed each of the 4 cavities with up to about 1 MW RF power, resulting in a total accelerating voltage of about 8 MV. See also 7412016X, 7412017X, 7411048X
1975-01-01
The picture shows one of the two initially installed cavities. The main RF-system of the SPS comprises four cavities: two of 20 m length and two of 16.5 m length. They are all installed in one long straight section (LSS 3). These cavities are of the travelling-wave type operating at a centre frequency of 200.2 MHz. They are wideband, filling time about 700 ns and untuned. The power amplifiers, using tetrodes are installed in a surface building 200 m from the cavities. Initially only two cavities were installed, a third cavity was installed in 1978 and a forth one in 1979. The number of power amplifiers was also gradually increased: by end 1980 there were 8 500 kW units combined in pairs to feed each of the 4 cavities with up to about 1 MW RF power, resulting in a total accelerating voltage of about 8 MV. See also 7412017X, 7411048X, 7505074.
Environment-Assisted Speed-up of the Field Evolution in Cavity Quantum Electrodynamics.
Cimmarusti, A D; Yan, Z; Patterson, B D; Corcos, L P; Orozco, L A; Deffner, S
2015-06-12
We measure the quantum speed of the state evolution of the field in a weakly driven optical cavity QED system. To this end, the mode of the electromagnetic field is considered as a quantum system of interest with a preferential coupling to a tunable environment: the atoms. By controlling the environment, i.e., changing the number of atoms coupled to the optical cavity mode, an environment-assisted speed-up is realized: the quantum speed of the state repopulation in the optical cavity increases with the coupling strength between the optical cavity mode and this non-Markovian environment (the number of atoms).
Cavity-enhanced spectroscopies
van Zee, Roger
2003-01-01
""Cavity-Enhanced Spectroscopy"" discusses the use of optical resonators and lasers to make sensitive spectroscopic measurements. This volume is written by the researcchers who pioneered these methods. The book reviews both the theory and practice behind these spectroscopic tools and discusses the scientific discoveries uncovered by these techniques. It begins with a chapter on the use of optical resonators for frequency stabilization of lasers, which is followed by in-depth chapters discussing cavity ring-down spectroscopy, frequency-modulated, cavity-enhanced spectroscopy, intracavity spectr
Tuned optical cavity magnetometer
Okandan, Murat; Schwindt, Peter
2010-11-02
An atomic magnetometer is disclosed which utilizes an optical cavity formed from a grating and a mirror, with a vapor cell containing an alkali metal vapor located inside the optical cavity. Lasers are used to magnetically polarize the alkali metal vapor and to probe the vapor and generate a diffracted laser beam which can be used to sense a magnetic field. Electrostatic actuators can be used in the magnetometer for positioning of the mirror, or for modulation thereof. Another optical cavity can also be formed from the mirror and a second grating for sensing, adjusting, or stabilizing the position of the mirror.
1974-01-01
The main RF-system of the SPS comprises four cavities: two of 20 m length and two of 16.5 m length. They are all installed in one long straight section (LSS 3). These cavities are of the travelling-wave type operating at a centre frequency of 200.2 MHz. They are wideband, filling time about 700 ns and untuned. A power of up to 790 kW can be supplied to each giving a total accelerating voltage of about 8 MV. The power amplifiers, using tetrodes are installed in a surface building 200 m from the cavities.
Isogeometric Simulation of Lorentz Detuning in Superconducting Accelerator Cavities
Corno, Jacopo; De Gersem, Herbert; Schöps, Sebastian
2016-01-01
Cavities in linear accelerators suffer from eigenfrequency shifts due to mechanical deformation caused by the electromagnetic radiation pressure, a phenomenon known as Lorentz detuning. Estimating the frequency shift up to the needed accuracy by means of standard Finite Element Methods, is a complex task due to the non exact representation of the geometry and due to the necessity for mesh refinement when using low order basis functions. In this paper, we use Isogeometric Analysis for discretising both mechanical deformations and electromagnetic fields in a coupled multiphysics simulation approach. The combined high-order approximation of both leads to high accuracies at a substantially lower computational cost.
On the exhaust of electromagnetic drive
Patrick Grahn
2016-06-01
Full Text Available Recent reports about propulsion without reaction mass have been met on one hand with enthusiasm and on the other hand with some doubts. Namely, closed metal cavities, when fueled with microwaves, have delivered thrust that could eventually maintain satellites on orbits using solar power. However, the measured thrust appears to be without any apparent exhaust. Thus the Law of Action-Reaction seems to have been violated. We consider the possibility that the exhaust is in a form that has so far escaped both experimental detection and theoretical attention. In the thruster’s cavity microwaves interfere with each other and invariably some photons will also end up co-propagating with opposite phases. At the destructive interference electromagnetic fields cancel. However, the photons themselves do not vanish for nothing but continue in propagation. These photon pairs without net electromagnetic field do not reflect back from the metal walls but escape from the resonator. By this action momentum is lost from the cavity which, according to the conservation of momentum, gives rise to an equal and opposite reaction. We examine theoretical corollaries and practical concerns that follow from the paired-photon conclusion.
Electron Plasmas Cooled by Cyclotron-Cavity Resonance
Povilus, A P; Evans, L T; Evetts, N; Fajans, J; Hardy, W N; Hunter, E D; Martens, I; Robicheaux, F; Shanman, S; So, C; Wang, X; Wurtele, J S
2016-01-01
We observe that high-Q electromagnetic cavity resonances increase the cyclotron cooling rate of pure electron plasmas held in a Penning-Malmberg trap when the electron cyclotron frequency, controlled by tuning the magnetic field, matches the frequency of standing wave modes in the cavity. For certain modes and trapping configurations, this can increase the cooling rate by factors of ten or more. In this paper, we investigate the variation of the cooling rate and equilibrium plasma temperatures over a wide range of parameters, including the plasma density, plasma position, electron number, and magnetic field.
805 MHz and 201 MHz RF cavity development for MUCOOL
Li, Derun; Corlett, J.; Ladran, Tony; MacGill, R.; Wallig, J.; S. Zisman, Michael; Moretti, Alfred; Rowe, A; Qian, Zubao; Wu, Vincent; Rimmer, Robert; Norem, J.; Norem, Jim; Summers, Donald; Torun, Yagmur
2003-08-01
A muon cooling channel calls for very high accelerating gradient RF structures to restore the energy lost by muons in the absorbers. The RF structures have to be operated in a strong magnetic field and thus the use of superconducting RF cavities is excluded. To achieve a high shunt impedance while maintaining a large enough aperture to accommodate a large transverse emittance muon beam, the cavity design adopted is a pillbox-like geometry with thin Be foils to terminate the electromagnetic field at the cavity iris. The possibility of using grids of thin-walled metallic tubes for the termination is also being explored. Many of the RF-related issues for muon cooling channels are being studied both theoretically and experimentally using an 805 MHz cavity that has a pillbox-like geometry with thin Be windows to terminate the cavity aperture. The design and performance of this cavity are reported here. High-power RF tests of the 805 MHz cavity are in progress at Lab G in Fermilab. The cavit
1976-01-01
The SPS started up with 2 accelerating cavities (each consisting of 5 tank sections) in LSS3. They have a 200 MHz travelling wave structure (see 7411032 and 7802190) and 750 kW of power is fed to each of the cavities from a 1 MW tetrode power amplifier, located in a surface building above, via a coaxial transmission line. Clemens Zettler, builder of the SPS RF system, is standing at the side of one of the cavities. In 1978 and 1979 another 2 cavities were added and entered service in 1980. These were part of the intensity improvement programme and served well for the new role of the SPS as proton-antiproton collider. See also 7411032, 8011289, 8104138, 8302397.
This is an accelerating cavity from LEP, with a layer of niobium on the inside. Operating at 4.2 degrees above absolute zero, the niobium is superconducting and carries an accelerating field of 6 million volts per metre with negligible losses. Each cavity has a surface of 6 m2. The niobium layer is only 1.2 microns thick, ten times thinner than a hair. Such a large area had never been coated to such a high accuracy. A speck of dust could ruin the performance of the whole cavity so the work had to be done in an extremely clean environment. These challenging requirements pushed European industry to new achievements. 256 of these cavities are now used in LEP to double the energy of the particle beams.
Dental Sealants Prevent Cavities
... MMWR RSS VitalSigns RSS Error processing SSI file Dental Sealants Prevent Cavities Effective protection for children Language: ... more use of sealants and reimbursement of services. Dental care providers can Apply sealants to children at ...
Chung, Il-Sug; Mørk, Jesper
2010-01-01
A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide.......A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide....
Mechanical Design of a New Injector Cryomodule 2-Cell Cavity at CEBAF
Cheng, Guangfeng G. [JLAB; Henry, James E. [JLAB; Mammosser, John D. [JLAB; Rimmer, Robert A. [JLAB; Wang, Haipeng [JLAB; Wiseman, Mark A. [JLAB; Yang, Shuo [JLAB
2013-12-01
As a part of Jefferson Lab’s 12 GeV upgrade, a new injector superconducting RF cryomodule is required. This unit consists of a 2-cell and 7-cell cavity, with the latter being refurbished from an existing cavity. The new 2-cell cavity requires electromagnetic design and optimization followed by mechanical design analyses. The electromagnetic design is reported elsewhere. This paper aims to present the procedures and conclusions of the analyses on cavity tuning sensitivity, pressure sensitivity, upset condition pressure induced stresses, and structural vibration frequencies. The purposes of such analyses include: 1) provide reference data for cavity tuner design; 2) examine the structural integrity of the cavity; and 3) evaluate the 2-cell cavity’s resistance to microphonics. Design issues such as the location of stiffening rings, effect of tuner stiffness on cavity stress, choice of cavity wall thickness, etc. are investigated by conducting extensive finite element analyses. Progress in fabrication of the 2-cell cavity is also reported.
Benusiglio, Adrien; Clanet, Christophe
2012-01-01
We present a fluid dynamics video on cavities created by explosions of firecrackers at the water free surface. We use three types of firecrackers containing 1, 1.3 and 5 g of flash powder. The firecrackers are held with their center at the surface of water in a cubic meter pool. The movies are recorded from the side with a high-speed video camera. Without confinement the explosion produces an hemispherical cavity. Right after the explosion this cavity grows isotropically, the bottom then stops while the sides continue to expand. In the next phase the bottom of the cavity accelerates backwards to the surface. During this phase the convergence of the flow creates a central jet that rises above the free surface. In the last part of the video the explosion is confined in a vertical open tube made of glass and of centimetric diameter. The explosion creates a cylindrical cavity that develops towards the free end of the tube. Depending on the charge, the cavity can either stop inside the tube or at its exit, but nev...
The Superconducting TESLA Cavities
Aune, B.; Bloess, D.; Bonin, B.; Bosotti, A.; Champion, M.; Crawford, C.; Deppe, G.; Dwersteg, B.; Edwards, D.A.; Edwards, H.T.; Ferrario, M.; Fouaidy, M.; Gall, P-D.; Gamp, A.; Gössel, A.; Graber, J.; Hubert, D.; Hüning, M.; Juillard, M.; Junquera, T.; Kaiser, H.; Kreps, G.; Kuchnir, M.; Lange, R.; Leenen, M.; Liepe, M.; Lilje, L.; Matheisen, A.; Möller, W-D.; Mosnier, A.; Padamsee, H.; Pagani, C.; Pekeler, M.; Peters, H-B.; Peters, O.; Proch, D.; Rehlich, K.; Reschke, D.; Safa, H.; Schilcher, T.; Schmüser, P.; Sekutowicz, J.; Simrock, S.; Singer, W.; Tigner, M.; Trines, D.; Twarowski, K.; Weichert, G.; Weisend, J.; Wojtkiewicz, J.; Wolff, S.; Zapfe, K.
2000-01-01
The conceptional design of the proposed linear electron-positron colliderTESLA is based on 9-cell 1.3 GHz superconducting niobium cavities with anaccelerating gradient of Eacc >= 25 MV/m at a quality factor Q0 > 5E+9. Thedesign goal for the cavities of the TESLA Test Facility (TTF) linac was set tothe more moderate value of Eacc >= 15 MV/m. In a first series of 27industrially produced TTF cavities the average gradient at Q0 = 5E+9 wasmeasured to be 20.1 +- 6.2 MV/m, excluding a few cavities suffering fromserious fabrication or material defects. In the second production of 24 TTFcavities additional quality control measures were introduced, in particular aneddy-current scan to eliminate niobium sheets with foreign material inclusionsand stringent prescriptions for carrying out the electron-beam welds. Theaverage gradient of these cavities at Q0 = 5E+9 amounts to 25.0 +- 3.2 MV/mwith the exception of one cavity suffering from a weld defect. Hence only amoderate improvement in production and preparation technique...
Computer-aided design of the RF-cavity for a high-power S-band klystron
Kant, D.; Bandyopadhyay, A. K.; Pal, D.; Meena, R.; Nangru, S. C.; Joshi, L. M.
2012-08-01
This article describes the computer-aided design of the RF-cavity for a S-band klystron operating at 2856 MHz. State-of-the-art electromagnetic simulation tools SUPERFISH, CST Microwave studio, HFSS and MAGIC have been used for cavity design. After finalising the geometrical details of the cavity through simulation, it has been fabricated and characterised through cold testing. Detailed results of the computer-aided simulation and cold measurements are presented in this article.
Electromagnetic ultrasonic guided waves
Huang, Songling; Li, Weibin; Wang, Qing
2016-01-01
This book introduces the fundamental theory of electromagnetic ultrasonic guided waves, together with its applications. It includes the dispersion characteristics and matching theory of guided waves; the mechanism of production and theoretical model of electromagnetic ultrasonic guided waves; the effect mechanism between guided waves and defects; the simulation method for the entire process of electromagnetic ultrasonic guided wave propagation; electromagnetic ultrasonic thickness measurement; pipeline axial guided wave defect detection; and electromagnetic ultrasonic guided wave detection of gas pipeline cracks. This theory and findings on applications draw on the author’s intensive research over the past eight years. The book can be used for nondestructive testing technology and as an engineering reference work. The specific implementation of the electromagnetic ultrasonic guided wave system presented here will also be of value for other nondestructive test developers.
Basic Electromagnetism and Materials
Moliton, André
2007-01-01
Basic Electromagnetism and Materials is the product of many years of teaching basic and applied electromagnetism. This textbook can be used to teach electromagnetism to a wide range of undergraduate science majors in physics, electrical engineering or materials science. However, by making lesser demands on mathematical knowledge than competing texts, and by emphasizing electromagnetic properties of materials and their applications, this textbook is uniquely suited to students of materials science. Many competing texts focus on the study of propagation waves either in the microwave or optical domain, whereas Basic Electromagnetism and Materials covers the entire electromagnetic domain and the physical response of materials to these waves. Professor André Moliton is Director of the Unité de Microélectronique, Optoélectronique et Polymères (Université de Limoges, France), which brings together three groups studying the optoelectronics of molecular and polymer layers, micro-optoelectronic systems for teleco...
Coherent electron transparent tunneling through a single barrier within a Fabry-Perot cavity
Stolle, Jason; Baum, Chaz; Amann, Ryan; Haman, Ryan; Call, Tanner; Li, Wei
2016-07-01
Electromagnetic wave and quantum DeBroglie wave have many parallels between each other. We investigate the quantum mechanical counterpart of electromagnetic resonant tunneling through a non-absorbing metal layer. It is confirmed that an electron also has transparent transmission through a single barrier within a Fabry-Perot like cavity. This tunneling structure is actually a distortion of the Fabry-Perot echelon. We find that for a specific resonant electron energy, the cavity length is related to the electron's DeBroglie wavelength; and the single barrier can be located at a series positions with an interval equal to a half of the DeBroglie wavelength, not just at the center of the cavity. This tunneling phenomenon will have novel applications in quantum devices such as the resonant tunneling diode and scanning tunneling microscope. The results of this paper should also have impact on related electromagnetic research and application.
Static electromagnetic frequency changers
Rozhanskii, L L
1963-01-01
Static Electromagnetic Frequency Changers is about the theory, design, construction, and applications of static electromagnetic frequency changers, devices that used for multiplication or division of alternating current frequency. It is originally published in the Russian language. This book is organized into five chapters. The first three chapters introduce the readers to the principles of operation, the construction, and the potential applications of static electromagnetic frequency changers and to the principles of their design. The two concluding chapters use some hitherto unpublished work
Model for Electromagnetic Information Leakage
Mao Jian; Li Yongmei; Zhang Jiemin; Liu Jinming
2013-01-01
Electromagnetic leakage will happen in working information equipments; it could lead to information leakage. In order to discover the nature of information in electromagnetic leakage, this paper combined electromagnetic theory with information theory as an innovative research method. It outlines a systematic model of electromagnetic information leakage, which theoretically describes the process of information leakage, intercept and reproduction based on electromagnetic radiation, and ana...
Electromagnetic Interface Testing Facility
Federal Laboratory Consortium — The Electromagnetic Interface Testing facilitysupports such testing asEmissions, Field Strength, Mode Stirring, EMP Pulser, 4 Probe Monitoring/Leveling System, and...
Slewing crane with electromagnet
2006-01-01
This paper describes a slewing crane with electromagnet, operated by three three-phase induction motors. A switchboard described in a separate paper, which also depicts the electromagnet construction details, drives the motors and the electromagnet. From its seat – mounted on the crane - an operator can make the crane arm slew left or right. The electromagnet can be moved back, forward, up or down. The crane is made of iron, has a height of 3m and a length of 2,5m. Such proportions make it ve...
Large electromagnetic pumps. [LMFBR
Kilman, G.B.
1976-01-01
The development of large electromagnetic pumps for the liquid metal heat transfer systems of fission reactors has progressed for a number of years. Such pumps are now planned for fusion reactors and solar plants as well. The Einstein-Szilard (annular) pump has been selected as the preferred configuration. Some of the reasons that electromagnetic pumps may be preferred over mechanical pumps and why the annular configuration was selected are discussed. A detailed electromagnetic analysis of the annular pump, based on slug flow, is presented. The analysis is then used to explore the implications of large size and power on considerations of electromagnetic skin effect, geometric skin effect and the cylindrical geometry.
Coherently Opening a High-Q Cavity
Tufarelli, Tommaso; Ferraro, Alessandro; Serafini, Alessio; Bose, Sougato; Kim, M. S.
2014-04-01
We propose a general framework to effectively "open" a high-Q resonator, that is, to release the quantum state initially prepared in it in the form of a traveling electromagnetic wave. This is achieved by employing a mediating mode that scatters coherently the radiation from the resonator into a one-dimensional continuum of modes such as a waveguide. The same mechanism may be used to "feed" a desired quantum field to an initially empty cavity. Switching between an open and "closed" resonator may then be obtained by controlling either the detuning of the scatterer or the amount of time it spends in the resonator. First, we introduce the model in its general form, identifying (i) the traveling mode that optimally retains the full quantum information of the resonator field and (ii) a suitable figure of merit that we study analytically in terms of the system parameters. Then, we discuss two feasible implementations based on ensembles of two-level atoms interacting with cavity fields. In addition, we discuss how to integrate traditional cavity QED in our proposal using three-level atoms.
Field correlations and effective two level atom-cavity systems
Rebic, S; Tan, S M
2004-01-01
We analyse the properties of the second order correlation functions of the electromagnetic field in atom-cavity systems that approximate two-level systems. It is shown that a recently-developed polariton formalism can be used to account for all the properties of the correlations, if the analysis is extended to include two manifolds - corresponding to the ground state and the states excited by a single photon - rather than just two levels.
Cavity tests of parity-odd Lorentz violations in electrodynamics
Mewes, Matthew; Petroff, Alexander
2007-03-01
Electromagnetic resonant cavities form the basis for a number modern tests of Lorentz invariance. The geometry of most of these experiments implies unsuppressed sensitivities to parity-even Lorentz violations only. Parity-odd violations typically enter through suppressed boost effects, causing a reduction in sensitivity by roughly 4 orders of magnitude. Here we discuss possible techniques for achieving unsuppressed sensitivities to parity-odd violations using asymmetric resonators.
Coupled resonator vertical cavity laser
Choquette, K.D.; Chow, W.W.; Hou, H.Q.; Geib, K.M.; Hammons, B.E.
1998-01-01
The monolithic integration of coupled resonators within a vertical cavity laser opens up new possibilities due to the unique ability to tailor the interaction between the cavities. The authors report the first electrically injected coupled resonator vertical-cavity laser diode and demonstrate novel characteristics arising from the cavity coupling, including methods for external modulation of the laser. A coupled mode theory is used model the output modulation of the coupled resonator vertical cavity laser.
Design, prototyping and testing of a compact superconducting double quarter wave crab cavity
Xiao, Binping; Belomestnykh, Sergey; Ben-Zvi, Ilan; Calaga, Rama; Cullen, Chris; Capatina, Ofelia; Hammons, Lee; Li, Zenghai; Marques, Carlos; Skaritka, John; Verdú-Andres, Silvia; Wu, Qiong
2015-01-01
A novel design of superconducting Crab Cavity was proposed and designed at Brookhaven National Laboratory. The new cavity shape is a Double Quarter Wave or DQWCC. After fabrication and surface treatments, the niobium proof-of-principle cavity was cryogenically tested in a vertical cryostat. The cavity is extremely compact yet has a low frequency of 400 MHz, an essential property for service for the Large Hadron Collider luminosity upgrade. The electromagnetic properties of the cavity are also well matched for this demanding task. The demonstrated deflecting voltage of 4.6 MV is well above the requirement for a crab cavity in the future High Luminosity LHC of 3.34 MV. In this paper we present the design, prototyping and test results of the DQWCC.
Nasr, Mamdouh H; Eshrah, Islam A; Abuelfadl, Tamer M
2016-01-01
An eigenmode projection technique (EPT) is developed and employed to solve problems of electromagnetic resonance in closed cavities and scattering from discontinuities in guided-wave structures. The EPT invokes the eigenmodes of a canonical predefined cavity in the solution procedure and uses the expansion of these eigenmodes to solve Maxwell's equations, in conjunction with a convenient choice of port boundary conditions. For closed cavities, resonance frequencies of arbitrary-shaped cavities are accurately determined with a robust and efficient separation method of spurious modes. For waveguide scattering problems, the EPT is combined with the generalized scattering matrix approach to solve problems involving waveguide discontinuities with arbitrary dielectric profiles. Convergence studies show stable solutions for a relatively small number of expansion modes, and the proposed method shows great robustness over conventional solvers in analyzing electromagnetic problems with inhomogeneous materials.
Computation of the frequency response of a nonlinearly loaded antenna within a cavity
F. Gronwald
2004-01-01
Full Text Available We analyze a nonlinearly loaded dipole antenna which is located within a rectangular cavity and excited by an electromagnetic signal. The signal is composed from two different frequencies. In order to calculate the spectrum of the resulting electromagnetic field within the resonator we transform the antenna problem into a network problem. This requires to precisely determine the antenna impedance within the cavity. The resulting nonlinear equivalent network is solved by means of the harmonic balance technique. As a result the occurrence of low intermodulation frequencies within the spectrum is verified.
Wave Instabilities and Unidirectional Light Flow in a Cavity with Rotating Walls
Lannebère, Sylvain
2016-01-01
We investigate the conditions for the emergence of wave instabilities in a vacuum cavity delimited by cylindrical metallic walls in relative rotation. It is shown that for a small vacuum gap and for a rotation velocity exceeding a certain threshold, the interactions between the surface plasmon polaritons supported by each wall give rise to an unstable behavior of the electromagnetic field manifested in an exponential growth with time. The instabilities occur only for certain modes of oscillation and are due to the transformation of kinetic energy into electromagnetic energy. We also study the possibility of having asymmetric light flows and optical isolation relying on the relative motion of the cavity walls.
Metasurface external cavity laser
Xu, Luyao, E-mail: luyaoxu.ee@ucla.edu; Curwen, Christopher A.; Williams, Benjamin S. [Department of Electrical Engineering, University of California, Los Angeles, California 90095 (United States); California NanoSystems Institute, University of California, Los Angeles, California 90095 (United States); Hon, Philip W. C.; Itoh, Tatsuo [Department of Electrical Engineering, University of California, Los Angeles, California 90095 (United States); Chen, Qi-Sheng [Northrop Grumman Aerospace Systems, Redondo Beach, California 90278 (United States)
2015-11-30
A vertical-external-cavity surface-emitting-laser is demonstrated in the terahertz range, which is based upon an amplifying metasurface reflector composed of a sub-wavelength array of antenna-coupled quantum-cascade sub-cavities. Lasing is possible when the metasurface reflector is placed into a low-loss external cavity such that the external cavity—not the sub-cavities—determines the beam properties. A near-Gaussian beam of 4.3° × 5.1° divergence is observed and an output power level >5 mW is achieved. The polarized response of the metasurface allows the use of a wire-grid polarizer as an output coupler that is continuously tunable.
Introducing Electromagnetic Field Momentum
Hu, Ben Yu-Kuang
2012-01-01
I describe an elementary way of introducing electromagnetic field momentum. By considering a system of a long solenoid and line charge, the dependence of the field momentum on the electric and magnetic fields can be deduced. I obtain the electromagnetic angular momentum for a point charge and magnetic monopole pair partially through dimensional…
An Electromagnetic Beam Converter
2009-01-01
The present invention relates to an electromagnetic beam converter and a method for conversion of an input beam of electromagnetic radiation having a bell shaped intensity profile a(x,y) into an output beam having a prescribed target intensity profile l(x',y') based on a further development...
High frequency electromagnetic dosimetry
Sánchez-Hernández, David A
2009-01-01
Along with the growth of RF and microwave technology applications, there is a mounting concern about the possible adverse effects over human health from electromagnetic radiation. Addressing this issue and putting it into perspective, this groundbreaking resource provides critical details on the latest advances in high frequency electromagnetic dosimetry.
Tunability enhanced electromagnetic wiggler
Schlueter, Ross D.; Deis, Gary A.
1992-01-01
The invention discloses a wiggler used in synchrotron radiation sources and free electron lasers, where each pole is surrounded by at least two electromagnetic coils. The electromagnetic coils are energized with different amounts of current to provide a wide tunable range of the on-axis magnetic flux density, while preventing magnetic saturation of the poles.
Characteristics of Electromagnetic Pulse Coupling into Annular Apertures
Yan-Peng Sun
2013-11-01
Full Text Available Electromagnetic pulse (EMP coupling into the annular apertures can disturb or damage much electronic equipment. To enhance electronic system’s capability of anti-electromagnetic interference, the finite difference time domain method (FDTD was employed to study the characteristics of electromagnetic pulse coupling into the cavity enclosures with annular apertures. The coupling characteristics of annular apertures with different shapes (rectangle, square and circle were discussed. It shows that, in the case of the same aperture area, the coupling energy of electromagnetic pulse into the circular annular aperture is smaller than that into the rectangular and the square ones. To the rectangular annular aperture, while the polarization direction of the incident electromagnetic pulse is perpendicular to the long side of the rectangular annular aperture, the coupling energy is larger when the aspect ratio of the rectangular annular aperture is larger. The coupling effect of incident pulse with short pulse width is obviously better than the one with longer pulse width. The resonance phenomenon of the coupled waveform occurs in the cavity.
Experimental investigation of cavity flows
Loeland, Tore
1998-12-31
This thesis uses LDV (Laser Doppler Velocimetry), PIV (Particle Image Velocimetry) and Laser Sheet flow Visualisation to study flow inside three different cavity configurations. For sloping cavities, the vortex structure inside the cavities is found to depend upon the flow direction past the cavity. The shape of the downstream corner is a key factor in destroying the boundary layer flow entering the cavity. The experimental results agree well with numerical simulations of the same geometrical configurations. The results of the investigations are used to find the influence of the cavity flow on the accuracy of the ultrasonic flowmeter. A method to compensate for the cavity velocities is suggested. It is found that the relative deviation caused by the cavity velocities depend linearly on the pipe flow. It appears that the flow inside the cavities should not be neglected as done in the draft for the ISO technical report on ultrasonic flowmeters. 58 refs., 147 figs., 2 tabs.
Spatial mode effects in a cavity EIT-based quantum memory with ion Coulomb crystals
Zangenberg, Kasper R; Drewsen, Michael
2012-01-01
Quantum storage and retrieval of light in ion Coulomb crystals using cavity electromagnetically induced transparency is investigated theoretically. It is found that, when both the control and probe fields are coupled to the same cavity mode, their transverse mode profile affects the quantum memory efficiency in a non-trivial way. Under such conditions the control field parameters and crystal dimensions that maximize the memory efficiency are calculated.
Spatial mode effects in a cavity-EIT based quantum memory with ion Coulomb crystals
Zangenberg, Kasper Rothe; Dantan, Aurelien Romain; Drewsen, Michael
2012-01-01
Quantum storage and retrieval of light in ion Coulomb crystals using cavity electromagnetically induced transparency are investigated theoretically. It is found that when both the control and the probe fields are coupled to the same spatial cavity mode, their transverse mode profile affects the q...... the quantum memory efficiency in a non-trivial way. Under such conditions, the control-field parameters and crystal dimensions that maximize the memory efficiency are calculated....
Capture and release of a conditional state of a cavity QED system by quantum feedback.
Smith, W P; Reiner, J E; Orozco, L A; Kuhr, S; Wiseman, H M
2002-09-23
Detection of a single photon escaping an optical cavity QED system prepares a nonclassical state of the electromagnetic field. The evolution of the state can be modified by changing the drive of the cavity. For the appropriate feedback, the conditional state can be captured (stabilized) and then released. This is observed by a conditional intensity measurement that shows suppression of vacuum Rabi oscillations for the length of the feedback pulse and their subsequent return.
Shatrov, A. D.; Dubrov, M. N.; Aleksandrov, D. V.
2016-12-01
The behaviour of the electromagnetic field in a three-mirror laser cavity is described using the method of integral equations. The results of numerical calculations and experimental studies for particular examples implementing the considered configuration are presented. The conditions for optimal tuning of a laser interferometer-deformograph with a three-mirror cavity are determined. The contribution of the reflected and scattered light and arising additional seismic noises to the resulting error of laser gravitational wave detectors is studied.
Uniqueness and local stability for the inverse scattering problem of determining the cavity
FENG; Lixin; MA; Fuming
2005-01-01
Considering a time-harmonic electromagnetic plane wave incident on an arbitrarily shaped open cavity embedded in infinite ground plane, the physical process is modelled by Maxwell's equations. We investigate the inverse problem of determining the shape of the open cavity from the information of the measured scattered field. Results on the uniqueness and the local stability of the inverse problem in the 2-dimensional TM (transverse magnetic) polarization are proved in this paper.
An RF input coupler for a superconducting single cell cavity
Fechner, B.; Ouchi, Nobuo; Kusano, Joichi; Mizumoto, Motoharu; Mukugi, Ken [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Krawczyk, F.
1999-03-01
Japan Atomic Energy Research Institute proposes a high intensity proton accelerator for the Neutron Science Project. A superconducting linac is a main option for the high energy part of the accelerator. Design and development work for the superconducting accelerating cavities (resonant frequency of 600 MHz) is in progress. Superconducting cavities have an advantage of very high accelerating efficiency because RF wall loss is very small and much of the RF power fed to the cavity is consumed for the beam acceleration. On the other hand, an RF input coupler for the superconducting cavity has to be matched to the beam loading. Therefore, estimation of coupling coefficient or external quality factor (Qext) of the RF input coupler is important for the design of the couplers. In this work, Qext`s were calculated by the electromagnetic analysis code (MAFIA) and were compared with those by the measurements. A {beta} (ratio of the particle velocity to the light velocity) = 0.5 single-cell cavity with either axial coupler or side coupler was used in this work. In the experiments, a model cavity made by copper is applied. Both 2- and 3-dimensional calculations were performed in the axial coupler geometry and the results were compared. The agreements between calculated and measured values are good and this method for calculation of Qext is confirmed to be proper for the design of the RF input couplers. (author)
Quantum-to-classical transition in cavity quantum electrodynamics.
Fink, J M; Steffen, L; Studer, P; Bishop, Lev S; Baur, M; Bianchetti, R; Bozyigit, D; Lang, C; Filipp, S; Leek, P J; Wallraff, A
2010-10-15
The quantum properties of electromagnetic, mechanical or other harmonic oscillators can be revealed by investigating their strong coherent coupling to a single quantum two level system in an approach known as cavity quantum electrodynamics (QED). At temperatures much lower than the characteristic energy level spacing the observation of vacuum Rabi oscillations or mode splittings with one or a few quanta asserts the quantum nature of the oscillator. Here, we study how the classical response of a cavity QED system emerges from the quantum one when its thermal occupation-or effective temperature-is raised gradually over 5 orders of magnitude. In this way we explore in detail the continuous quantum-to-classical crossover and demonstrate how to extract effective cavity field temperatures from both spectroscopic and time-resolved vacuum Rabi measurements.
1995-01-01
Engineers work in a clean room on one of the superconducting cavities for the upgrade to the LEP accelerator, known as LEP-2. The use of superconductors allow higher electric fields to be produced so that higher beam energies can be reached.
Finemet cavity impedance studies
Persichelli, S; Migliorati, M; Salvant, B
2013-01-01
The aim of the study is to evaluate the impedance of the Finemet kicker cavity to be installed in the PS straight section 02 during LS1, under realistic assumptions of bunch length. Time domain simulations with CST Particle Studio have been performed in order to get the impedance of the cavity and make a comparison with the longitudinal impedance measured for a single cell prototype. The study has been performed on simplified 3D geometries imported from a mechanical CATIA drawing, assuming that the simplications have small impact on the nal results. Simulations confirmed that the longitudinal impedance observed with measurements can be excited by bunches circulating in the PS. In the six-cells Finemet cavity, PS bunches circulating in the center can excite a longitudinal impedance, the real part of which has a maximum of 2 kOhm at 4 MHz. This mode does not seem to have any transverse component. All the eigenmodes of the cavity are strongly damped by the Finemet rings: we predict to have no issues regarding tr...
Cengiz, Murat İnanç; Cengiz, Seda; Wang, Hom-Lay
2012-01-01
While initially the oral cavity was considered to be mainly a source of various bacteria, their toxins and antigens, recent studies showed that it may also be a location of oxidative stress and periodontal inflammation. Accordingly, this paper focuses on the involvement of melatonin in oxidative stress diseases of oral cavity as well as on potential therapeutic implications of melatonin in dental disorders. Melatonin has immunomodulatory and antioxidant activities, stimulates the proliferation of collagen and osseous tissue, and acts as a protector against cellular degeneration associated with aging and toxin exposure. Arising out of its antioxidant actions, melatonin protects against inflammatory processes and cellular damage caused by the toxic derivates of oxygen. As a result of these actions, melatonin may be useful as a coadjuvant in the treatment of certain conditions of the oral cavity. However, the most important effect of melatonin seems to result from its potent antioxidant, immunomodulatory, protective, and anticancer properties. Thus, melatonin could be used therapeutically for instance, locally, in the oral cavity damage of mechanical, bacterial, fungal, or viral origin, in postsurgical wounds caused by tooth extractions and other oral surgeries. Additionally, it can help bone formation in various autoimmunological disorders such as Sjorgen syndrome, in periodontal diseases, in toxic effects of dental materials, in dental implants, and in oral cancers.
Murat İnanç Cengiz
2012-01-01
Full Text Available While initially the oral cavity was considered to be mainly a source of various bacteria, their toxins and antigens, recent studies showed that it may also be a location of oxidative stress and periodontal inflammation. Accordingly, this paper focuses on the involvement of melatonin in oxidative stress diseases of oral cavity as well as on potential therapeutic implications of melatonin in dental disorders. Melatonin has immunomodulatory and antioxidant activities, stimulates the proliferation of collagen and osseous tissue, and acts as a protector against cellular degeneration associated with aging and toxin exposure. Arising out of its antioxidant actions, melatonin protects against inflammatory processes and cellular damage caused by the toxic derivates of oxygen. As a result of these actions, melatonin may be useful as a coadjuvant in the treatment of certain conditions of the oral cavity. However, the most important effect of melatonin seems to result from its potent antioxidant, immunomodulatory, protective, and anticancer properties. Thus, melatonin could be used therapeutically for instance, locally, in the oral cavity damage of mechanical, bacterial, fungal, or viral origin, in postsurgical wounds caused by tooth extractions and other oral surgeries. Additionally, it can help bone formation in various autoimmunological disorders such as Sjorgen syndrome, in periodontal diseases, in toxic effects of dental materials, in dental implants, and in oral cancers.
Niobium superconducting cavity
CERN PhotoLab
1980-01-01
This 5-cell superconducting cavity, made from bulk-Nb, stems from the period of general studies, not all directed towards direct use at LEP. This one is dimensioned for 1.5 GHz, the frequency used at CEBAF and also studied at Saclay (LEP RF was 352.2 MHz). See also 7908227, 8007354, 8209255, 8210054, 8312339.
2016-01-01
The present invention provides a vertical cavity laser comprising a grating layer comprising an in-plane grating, the grating layer having a first side and having a second side opposite the first side and comprising a contiguous core grating region having a grating structure, wherein an index...
Nye, Kyle; Eslam-Panah, Azar
2016-11-01
Root canal treatment involves the removal of infected tissue inside the tooth's canal system and filling the space with a dense sealing agent to prevent further infection. A good root canal treatment happens when the canals are filled homogeneously and tightly down to the root apex. Such a tooth is able to provide valuable service for an entire lifetime. However, there are some examples of poorly performed root canals where the anterior and posterior routes are not filled completely. Small packets of air can be trapped in narrow access cavities when restoring with resin composites. Such teeth can cause trouble even after many years and lead the conditions like acute bone infection or abscesses. In this study, the filling of dead-end conical cavities with various liquids is reported. The first case studies included conical cavity models with different angles and lengths to visualize the filling process. In this investigation, the rate and completeness at which a variety of liquids fill the cavity were observed to find ideal conditions for the process. Then, a 3D printed model of the scaled representation of a molar with prepared post spaces was used to simulate the root canal treatment. The results of this study can be used to gain a better understanding of the restoration for endodontically treated teeth.
Nonreciprocal Electromagnetic Devices in Gyromagnetic Photonic Crystals
Li, Zhi-Yuan; Liu, Rong-Juan; Gan, Lin; Fu, Jin-Xin; Lian, Jin
2014-01-01
Gyromagnetic photonic crystal (GPC) offers a promising way to realize robust transport of electromagnetic waves against backscattering from various disorders, perturbations and obstacles due to existence of unique topological electromagnetic states. The dc magnetic field exerting upon the GPC brings about the time-reversal symmetry breaking, splits the band degeneracy and opens band gaps where the topological chiral edge states (CESs) arise. The band gap can originate either from long-range Bragg-scattering effect or from short-range localized magnetic surface plasmon resonance (MSP). These topological edge states can be explored to construct backscattering-immune one-way waveguide and other nonreciprocal electromagnetic devices. In this paper we review our recent theoretical and experimental studies of the unique electromagnetic properties of nonreciprocal devices built in GPCs. We will discuss various basic issues like experimental instrumental setup, sample preparations, numerical simulation methods, tunable properties against magnetic field, band degeneracy breaking and band gap opening and creation of topological CESs. We will investigate the unidirectional transport properties of one-way waveguide under the influence of waveguide geometries, interface morphologies, intruding obstacles, impedance mismatch, lattice disorders, and material dissipation loss. We will discuss the unique coupling properties between one-wave waveguide and resonant cavities and their application as novel one-way bandstop filter and one-way channel-drop filter. We will also compare the CESs created in the Bragg-scattering band gap and the MSP band gap under the influence of lattice disorders. These results can be helpful for designing and exploring novel nonreciprocal electromagnetic devices for optical integration and information processing.
Teleportation of Cavity Field States via Cavity QED
Guerra, E S
2004-01-01
In this article we discuss two schemes of teleportation of cavity field states. In the first scheme we consider cavities prepared in a coherent state and in the second scheme we consider cavities prepared in a superposition of zero and one Fock states.
Wang, Haipeng [Jefferson Lab, Newport News, VA; Cheng, Guangfeng [Jefferson Lab, Newport News, VA; Turlington, Larry T. [Jefferson Lab, Newport News, VA; Wissmann, Mark J. [Jefferson Lab, Newport News, VA
2015-09-01
A short version of the original CEBAF normal conducting 4-rod separator cavity has been developed into a 750MHz one * since the concept of simultaneous 4-hall operation for CEBAF is introduced **. This work has been advanced further based on the EM design optimization, bench measurement and by conducting RF-thermal coupled simulation using CST and ANSYS to confirm the cavity tuning and thermal performance. The cavity fabrication used matured technology like copper plating and machining. The cavity flanges, couplers, tuners and cooling channels adopted consistent/compatible hardware with the existing 500MHz cavities. The electromagnetic and thermal design simulations have greatly reduced the prototyping and bench tuning time of the first prototype. Four production cavities have reached a typical 1.94MV kick voltage or 3.0kW wall loss on each cavity after a minor multipactoring or no processing, 7.5% overhead power than the design specification.
Computer techniques for electromagnetics
Mittra, R
1973-01-01
Computer Techniques for Electromagnetics discusses the ways in which computer techniques solve practical problems in electromagnetics. It discusses the impact of the emergence of high-speed computers in the study of electromagnetics. This text provides a brief background on the approaches used by mathematical analysts in solving integral equations. It also demonstrates how to use computer techniques in computing current distribution, radar scattering, and waveguide discontinuities, and inverse scattering. This book will be useful for students looking for a comprehensive text on computer techni
Nonlinear surface electromagnetic phenomena
Ponath, H-E
1991-01-01
In recent years the physics of electromagnetic surface phenomena has developed rapidly, evolving into technologies for communications and industry, such as fiber and integrated optics. The variety of phenomena based on electromagnetism at surfaces is rich and this book was written with the aim of summarizing the available knowledge in selected areas of the field. The book contains reviews written by solid state and optical physicists on the nonlinear interaction of electromagnetic waves at and with surfaces and films. Both the physical phenomena and some potential applications are
High frequency electromagnetic tomography
Daily, W.; Ramirez, A.; Ueng, T.; Latorre, R.
1989-09-01
An experiment was conducted in G Tunnel at the Nevada Test Site to evaluate high frequency electromagnetic tomography as a candidate for in situ monitoring of hydrology in the near field of a heater placed in densely welded tuff. Tomographs of 200 MHz electromagnetic permittivity were made for several planes between boreholes. Data were taken before the heater was turned on, during heating and during cooldown of the rockmass. This data is interpreted to yield maps of changes in water content of the rockmass as a function of time. This interpretation is based on laboratory measurement of electromagnetic permittivity as a function of water content for densely welded tuff. 8 refs., 6 figs.
Electromagnetic analysis of electromagnet for control element drive mechanism
Huh, Hyung; Kim, J.I.; Kim, J.H.; Kim, Y.W. [Korea Atomic Energy Research Institute, Taejon (Korea)
1999-06-01
A 2-D electromagnetic numerical analysis model is developed to calculate the attraction force of the electromagnet for CEDM. trend relating to electromagnetic design within constrained. The important design variables of the electromagnet are current density and air gap length. The results show that the attraction force by using optimum design point is well within the acceptable level. It is anticipated that the results will eventually be utilized for more realitic design of the electromagnet. 10 refs., 38 figs., 2 tabs. (Author)
Optimization of photonic crystal cavities
Wang, Fengwen; Sigmund, Ole
2017-01-01
We present optimization of photonic crystal cavities. The optimization problem is formulated to maximize the Purcell factor of a photonic crystal cavity. Both topology optimization and air-hole-based shape optimization are utilized for the design process. Numerical results demonstrate...... that the Purcell factor of the photonic crystal cavity can be significantly improved through optimization....
Hollow waveguide cavity ringdown spectroscopy
Dreyer, Chris (Inventor); Mungas, Greg S. (Inventor)
2012-01-01
Laser light is confined in a hollow waveguide between two highly reflective mirrors. This waveguide cavity is used to conduct Cavity Ringdown Absorption Spectroscopy of loss mechanisms in the cavity including absorption or scattering by gases, liquid, solids, and/or optical elements.
Studies on high order mode of bell-shaped prototype cavities
无
2008-01-01
Aluminium and copper prototype cavities were designed to study higher order modes(HOM).An automatic field mapping system was developed with LabVIEW to measure the adiofrequency(RF)charac teristics,such as resonant frequency,Q-value,shunt impedance and electromagnetic field distribution of the higher-order modes in a model RF cavity.Two kinds of the bell-shaped cavities were measured using the field mapping system,their frequencies are 1.5 GHz and 800 MHz respectively.The fields' distributions of the monopole modes and dipole modes,as well the R/Q values,were measured.
Multipole Field Effects for the Superconducting Parallel-Bar Deflecting/Crabbing Cavities
De Silva, Payagalage Subashini Uddika [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States) and Old Dominion University, Norfolk, VA (United States); Delayen, Jean Roger [Old Dominion University, Norfolk, VA (United States)
2012-09-01
The superconducting parallel-bar deflecting/crabbing cavity is currently being considered as one of the design options in rf separation for the Jefferson Lab 12 GeV upgrade and for the crabbing cavity for the proposed LHC luminosity upgrade. Knowledge of multipole field effects is important for accurate beam dynamics study of rf structures. The multipole components can be accurately determined numerically using the electromagnetic surface field data in the rf structure. This paper discusses the detailed analysis of those components for the fundamental deflecting/crabbing mode and higher order modes in the parallel-bar deflecting/crabbing cavity.
Comparison of high order modes damping techniques for 800 MHz single cell superconducting cavities
Shashkov, Ya V; Zobov, M M
2014-01-01
Currently, applications of 800 MHz harmonic cavities in both bunch lengthening and shortening regimes are under consideration and discussion in the framework of the High Luminosity LHC project. In this paper we study electromagnetic characteristics of high order modes (HOM) for a single cell 800 MHz superconducting cavity and arrays of such cavities connected by drifts tubes. Different techniques for the HOM damping such as beam pipe grooves, coaxial-notch loads, fluted beam pipes etc. are investigated and compared. The influence of the sizes and geometry of the drift tubes on the HOM damping is analyzed.
Analysis and suppression of RF radiation from the PSI 590 MeV cyclotron Flat Top Cavity
Pogue, N. J.; Stingelin, L.; Adelmann, A.
2016-08-01
The Flat Top Cavity, located in the PSI HIPA Ring Cyclotron leaks RF power of several kilo Watts into the cyclotron's vacuum space causing several complications. A detailed electromagnetic model was created and simulations performed to analyze the mechanisms by which power is leaking out of the Flat Top Cavity. The tolerances needed to limit the leaked power in future iterations of the Flat Top cavity are reported. Comparison of the model to measurements are described as well as two potential methods to limit power leakage. These studies will have direct impact on future RF cavity designs for cyclotrons as power levels increase and higher RF fields are required.
Analysis and Suppression of RF Radiation from the PSI 590MeV Cyclotron Flat Top Cavity
Pogue, Nathaniel; Stingelin, Lukas
2016-01-01
The Flat Top Cavity, located in the PSI HIPA Ring Cyclotron leaks RF power of several kilo Watts into the cyclotrons vacuum space causing several complications. A detailed electromagnetic model was created and simulations performed to analyze the mechanisms by which power is leaking out of the Flat Top Cavity. The tolerances needed to limit the leaked power in future iterations of the Flat Top cavity are reported. Comparison of the model to measurements are described as well as two potential methods to limit power leakage. These studies will have direct impact on future RF cavity designs for cyclotrons as power levels increase and higher RF fields are required.
Electromagnetic fields and waves
Rojansky, Vladimir
2012-01-01
This comprehensive introduction to classical electromagnetic theory covers the major aspects, including scalar fields, vectors, laws of Ohm, Joule, Coulomb, Faraday, Maxwell's equation, and more. With numerous diagrams and illustrations.
OPAL detector electromagnetic calorimeter
1988-01-01
Half of the electromagnetic calorimeter of the OPAL detector is seen in this photo. This calorimeter consists of 4720 blocks of lead glass. It was used to detect and measure the energy of photons, electrons and positrons by absorbing them.
BGO* electromagnetic calorimeter
CERN
1988-01-01
* Short for Bismuth-Germanium-Oxyde, a scintillator of high atomic number Z used in electromagnetic crystal calorimeters. BGO is characterized by fast rise time (a few nanoseconds) and short radiation length (1.11 cm).
The classical electromagnetic field
Eyges, Leonard
2010-01-01
This excellent text covers a year's course in advanced theoretical electromagnetism, first introducing theory, then its application. Topics include vectors D and H inside matter, conservation laws for energy, momentum, invariance, form invariance, covariance in special relativity, and more.
Electromagnetism in the Movies.
Everitt, Lori R.; Patterson, Evelyn T.
1999-01-01
Describes how the authors used portions of popular movies to help students review concepts related to electromagnetism. Movies used and concepts covered in the review are listed, and a sample activity is described. (WRM)
Computational electromagnetic-aerodynamics
Shang, Joseph J S
2016-01-01
Presents numerical algorithms, procedures, and techniques required to solve engineering problems relating to the interactions between electromagnetic fields, fluid flow, and interdisciplinary technology for aerodynamics, electromagnetics, chemical-physics kinetics, and plasmadynamics This book addresses modeling and simulation science and technology for studying ionized gas phenomena in engineering applications. Computational Electromagnetic-Aerodynamics is organized into ten chapters. Chapter one to three introduce the fundamental concepts of plasmadynamics, chemical-physics of ionization, classical magnetohydrodynamics, and their extensions to plasma-based flow control actuators, high-speed flows of interplanetary re-entry, and ion thrusters in space exploration. Chapter four to six explain numerical algorithms and procedures for solving Maxwell’s equation in the time domain for computational electromagnetics, plasma wave propagation, and the time-dependent c mpressible Navier-Stokes equation for aerodyn...
Electromagnetic rotational actuation.
Hogan, Alexander Lee
2010-08-01
There are many applications that need a meso-scale rotational actuator. These applications have been left by the wayside because of the lack of actuation at this scale. Sandia National Laboratories has many unique fabrication technologies that could be used to create an electromagnetic actuator at this scale. There are also many designs to be explored. In this internship exploration of the designs and fabrications technologies to find an inexpensive design that can be used for prototyping the electromagnetic rotational actuator.
The ATLAS electromagnetic calorimeter
Maximilien Brice
2003-01-01
Michel Mathieu, a technician for the ATLAS collaboration, is cabling the ATLAS electromagnetic calorimeter's first end-cap, before insertion into its cryostat. Millions of wires are connected to the electromagnetic calorimeter on this end-cap that must be carefully fed out from the detector so that data can be read out. Every element on the detector will be attached to one of these wires so that a full digital map of the end-cap can be recreated.
Electromagnetic Education in India
Bajpai Shrish
2016-06-01
Full Text Available Out of the four fundamental interactions in nature, electromagnetics is one of them along with gravitation, strong interaction and weak interaction. The field of electromagnetics has made much of the modern age possible. Electromagnets are common in day-to-day appliances and are becoming more conventional as the need for technology increases. Electromagnetism has played a vital role in the progress of human kind ever since it has been understood. Electromagnets are found everywhere. One can find them in speakers, doorbells, home security systems, anti-shoplifting systems, hard drives, mobiles, microphones, Maglev trains, motors and many other everyday appliances and products. Before diving into the education system, it is necessary to reiterate its importance in various technologies that have evolved over time. Almost every domain of social life has electromagnetic playing its role. Be it the mobile vibrators you depend upon, a water pump, windshield wipers during rain and the power windows of your car or even the RFID tags that may ease your job during shopping. A flavor of electromagnetics is essential during primary level of schooling for the student to understand its future prospects and open his/her mind to a broad ocean of ideas. Due to such advancements this field can offer, study on such a field is highly beneficial for a developing country like India. The paper presents the scenario of electromagnetic education in India, its importance and numerous schemes taken by the government of India to uplift and acquaint the people about the importance of EM and its applications.
Electromagnetic reverberation chambers
Besnier, Philippe
2013-01-01
Dedicated to a complete presentation on all aspects of reverberation chambers, this book provides the physical principles behind these test systems in a very progressive manner. The detailed panorama of parameters governing the operation of electromagnetic reverberation chambers details various applications such as radiated immunity, emissivity, and shielding efficiency experiments.In addition, the reader is provided with the elements of electromagnetic theory and statistics required to take full advantage of the basic operational rules of reverberation chambers, including calibration proc
Inhomogeneous electromagnetic gravitational collapse
Stein-Schabes, J.A.
1985-04-15
The collapse of an inhomogeneous dust cloud in the presence of an electromagnetic field is investigated in detail. The possibility of a naked singularity arising is studied using some known solutions for a spherical charged inhomogeneous dust cloud. It is found that locally naked singularities may develop when the arbitrary functions in the solution are chosen in a special way, but that a global naked singularity will not form. Also the role of the electromagnetic pressure is discussed.
Cavity enhanced atomic magnetometry
Crepaz, Herbert; Dumke, Rainer
2015-01-01
Atom sensing based on Faraday rotation is an indispensable method for precision measurements, universally suitable for both hot and cold atomic systems. Here we demonstrate an all-optical magnetometer where the optical cell for Faraday rotation spectroscopy is augmented with a low finesse cavity. Unlike in previous experiments, where specifically designed multipass cells had been employed, our scheme allows to use conventional, spherical vapour cells. Spherical shaped cells have the advantage that they can be effectively coated inside with a spin relaxation suppressing layer providing long spin coherence times without addition of a buffer gas. Cavity enhancement shows in an increase in optical polarization rotation and sensitivity compared to single-pass configurations.
Adams, N; Tomson, P L
2014-03-01
Each stage of root canal treatment should be carried out to the highest possible standard. The access cavity is arguably the most important technical stage, as subsequent preparation of the root canal(s) can be severely comprised if this is not well executed. Inadequate access can lead to canals being left untreated, poorly disinfected, difficult to shape and obturate, and may ultimately lead to the failure of the treatment. This paper highlights common features in root canal anatomy and outlines basic principles for locating root canals and producing a good access cavity. It also explores each phase of the preparation in detail and offers suggestions of instruments that have been specifically designed to overcome potential difficulties in the process. Good access design and preparation will result in an operative environment which will facilitate cleaning, shaping and obturation of the root canal system in order to maximise success.
Colloquium: cavity optomechanics
2011-01-01
Monday 14 November 2011, 17:00 Ecole de Physique, Auditoire Stueckelberg Université de Genève Cavity optomechanics: controlling micro mechanical oscillators with laser light Prof. Tobias Kippenberg EPFL, Lausanne Laser light can be used to cool and to control trapped ions, atoms and molecules at the quantum level. This has lead to spectacular advances such as the most precise atomic clocks. An outstanding frontier is the control with lasers of nano- and micro-mechancial systems. Recent advances in cavity optomechanics have allowed such elementary control for the first time, enabling mechanical systems to be ground state cooled leading to readout with quantum limited sensitivity and permitting to explore new device concepts resulting from radiation pressure.
Cavity enhanced atomic magnetometry.
Crepaz, Herbert; Ley, Li Yuan; Dumke, Rainer
2015-10-20
Atom sensing based on Faraday rotation is an indispensable method for precision measurements, universally suitable for both hot and cold atomic systems. Here we demonstrate an all-optical magnetometer where the optical cell for Faraday rotation spectroscopy is augmented with a low finesse cavity. Unlike in previous experiments, where specifically designed multipass cells had been employed, our scheme allows to use conventional, spherical vapour cells. Spherical shaped cells have the advantage that they can be effectively coated inside with a spin relaxation suppressing layer providing long spin coherence times without addition of a buffer gas. Cavity enhancement shows in an increase in optical polarization rotation and sensitivity compared to single-pass configurations.
Model for Electromagnetic Information Leakage
Mao Jian
2013-09-01
Full Text Available Electromagnetic leakage will happen in working information equipments; it could lead to information leakage. In order to discover the nature of information in electromagnetic leakage, this paper combined electromagnetic theory with information theory as an innovative research method. It outlines a systematic model of electromagnetic information leakage, which theoretically describes the process of information leakage, intercept and reproduction based on electromagnetic radiation, and analyzes amount of leakage information with formulas.
Advanced electromagnetic methods for aerospace vehicles
Balanis, Constantine A.; El-Sharawy, El-Budawy; Hashemi-Yeganeh, Shahrokh; Aberle, James T.; Birtcher, Craig R.
1991-01-01
The Advanced Helicopter Electromagnetics is centered on issues that advance technology related to helicopter electromagnetics. Progress was made on three major topics: composite materials; precipitation static corona discharge; and antenna technology. In composite materials, the research has focused on the measurements of their electrical properties, and the modeling of material discontinuities and their effect on the radiation pattern of antennas mounted on or near material surfaces. The electrical properties were used to model antenna performance when mounted on composite materials. Since helicopter platforms include several antenna systems at VHF and UHF bands, measuring techniques are being explored that can be used to measure the properties at these bands. The effort on corona discharge and precipitation static was directed toward the development of a new two dimensional Voltage Finite Difference Time Domain computer program. Results indicate the feasibility of using potentials for simulating electromagnetic problems in the cases where potentials become primary sources. In antenna technology the focus was on Polarization Diverse Conformal Microstrip Antennas, Cavity Backed Slot Antennas, and Varactor Tuned Circular Patch Antennas. Numerical codes were developed for the analysis of two probe fed rectangular and circular microstrip patch antennas fed by resistive and reactive power divider networks.
Cavity enhanced atomic magnetometry
Herbert Crepaz; Li Yuan Ley; Rainer Dumke
2015-01-01
Atom sensing based on Faraday rotation is an indispensable method for precision measurements, universally suitable for both hot and cold atomic systems. Here we demonstrate an all-optical magnetometer where the optical cell for Faraday rotation spectroscopy is augmented with a low finesse cavity. Unlike in previous experiments, where specifically designed multipass cells had been employed, our scheme allows to use conventional, spherical vapour cells. Spherical shaped cells have the advantage...
Covariant electromagnetic field lines
Hadad, Y.; Cohen, E.; Kaminer, I.; Elitzur, A. C.
2017-08-01
Faraday introduced electric field lines as a powerful tool for understanding the electric force, and these field lines are still used today in classrooms and textbooks teaching the basics of electromagnetism within the electrostatic limit. However, despite attempts at generalizing this concept beyond the electrostatic limit, such a fully relativistic field line theory still appears to be missing. In this work, we propose such a theory and define covariant electromagnetic field lines that naturally extend electric field lines to relativistic systems and general electromagnetic fields. We derive a closed-form formula for the field lines curvature in the vicinity of a charge, and show that it is related to the world line of the charge. This demonstrates how the kinematics of a charge can be derived from the geometry of the electromagnetic field lines. Such a theory may also provide new tools in modeling and analyzing electromagnetic phenomena, and may entail new insights regarding long-standing problems such as radiation-reaction and self-force. In particular, the electromagnetic field lines curvature has the attractive property of being non-singular everywhere, thus eliminating all self-field singularities without using renormalization techniques.
Electromagnetic cellular interactions.
Cifra, Michal; Fields, Jeremy Z; Farhadi, Ashkan
2011-05-01
Chemical and electrical interaction within and between cells is well established. Just the opposite is true about cellular interactions via other physical fields. The most probable candidate for an other form of cellular interaction is the electromagnetic field. We review theories and experiments on how cells can generate and detect electromagnetic fields generally, and if the cell-generated electromagnetic field can mediate cellular interactions. We do not limit here ourselves to specialized electro-excitable cells. Rather we describe physical processes that are of a more general nature and probably present in almost every type of living cell. The spectral range included is broad; from kHz to the visible part of the electromagnetic spectrum. We show that there is a rather large number of theories on how cells can generate and detect electromagnetic fields and discuss experimental evidence on electromagnetic cellular interactions in the modern scientific literature. Although small, it is continuously accumulating. Copyright © 2010 Elsevier Ltd. All rights reserved.
Kimble, H. J.; Boca, A.; Boozer, A. D.; Bowen, W. P.; Buck, J. R.; Chou, C. W.; Duan, L.-M.; Kuzmich, A.; McKeever, J.
2004-12-01
Observations of cooling and trapping of N = 1,2,3,... atoms inside a small optical cavity are described. The atom-cavity system operates in a regime of strong coupling for which single photons are sufficient to saturate the atomic response. New theoretical protocols for the efficient engineering of multi-atom entanglement within the setting of cavity QED are described. By trapping a single atom within the cavity mode, a one-atom laser is experimentally realized in a regime of strong coupling. Beyond the setting of cavity QED, quantum correlations have been observed for photon pairs emitted from an atomic ensemble and with a programmable time offset.
Yim, Che Wook; Kim, Song Hyun; Kim, Do Hyun; Shin, Chang Ho [Hanyang University, Seoul (Korea, Republic of)
2015-05-15
The detection efficiency using the gravimetry method is significantly low; therefore, it requires large surveying time. The magnetometry method detects the cavities by the magnitude of the magnetic field. However, the magnetometry method is problematical in urban areas due to pipes and electrical installations. GPR is the method that uses high frequency electromagnetic wave. This method is widely used for the inspection; however, the detection accuracy of sinkholes can be low in specific soil types. In this study, to verify the feasibility of the neutron source-based inspection system to detect the cavity detection, the Monte Carlo simulation was performed using neutron source. The analysis shows that the detection of the cavity with the given condition is possible when the diameter of cavity is over 100 cm. However, the detection efficiency can be enough increased if some optimization strategies for the inspection are developed. Also, it is expected that the proposed inspection method can detect the expected locations of the cavities.
Interference control of perfect photon absorption in cavity quantum electrodynamics
Wang, Liyong; Zhu, Yifu; Agarwal, G S
2016-01-01
We propose and analyze a scheme for controlling coherent photon transmission and reflection in a cavity-quantum-electrodynamics (CQED) system consisting of an optical resonator coupled with three-level atoms coherently prepared by a control laser from free space. When the control laser is off and the cavity is excited by two identical light fields from two ends of the cavity, the two input light fields can be completely absorbed by the CQED system and the light energy is converted into the excitation of the polariton states, but no light can escape from the cavity. Two distinct cases of controlling the perfect photon absorption are analyzed: (a) when the control laser is tuned to the atomic resonance and creates electromagnetically induced transparency, the prefect photon absorption is suppressed and the input light fields are nearly completely transmitted through the cavity; (b) when the control laser is tuned to the polariton state resonance and inhibits the polariton state excitation, the perfect photon ab...
Rapid Electromagnetic Analysis of Entire Accelerator Structures
Cooke, Simon
2005-01-01
We present results of a new method for fast, accurate calculation, in 3-D, of the electromagnetic mode spectrum of long, tapered accelerator structures. Instead of discretizing the entire structure directly and solving a huge matrix eigenvalue problem, we use a new two-step technique that scales much better to long, multi-cavity structures. In the first step we compute a small number of eigenmodes of individual cavities, achieving 0.05% frequency accuracy using a new second-order finite-element code. In the second step we use these 3-D mode solutions as field basis functions to obtain a reduced matrix representation of Maxwell's equations for the complete structure. Solving the reduced system takes just a few minutes on a desktop PC even with more than 100 non-identical cavities, and gives the complete mode spectrum in the first few bands of the structure. By judicious choice of the basis modes, we retain 0.05% frequency accuracy for these global solutions, and can reconstruct the complete 3-D field of each m...
Crab Cavities for Linear Colliders
Burt, G.; Ambattu, P.; Carter, R.; Dexter, A.; Tahir, I.; /Cockcroft Inst. Accel. Sci. Tech. /Lancaster U.; Beard, C.; Dykes, M.; Goudket, P.; Kalinin, A.; Ma, L.; McIntosh, P.; /Daresbury; Shulte, D.; /CERN; Jones, Roger M.; /Cockcroft Inst. Accel. Sci. Tech. /Manchester U.; Bellantoni, L.; Chase, B.; Church, M.; Khabouline, T.; Latina, A.; /Fermilab; Adolphsen, C.; Li, Z.; Seryi, Andrei; /SLAC
2011-11-08
Crab cavities have been proposed for a wide number of accelerators and interest in crab cavities has recently increased after the successful operation of a pair of crab cavities in KEK-B. In particular crab cavities are required for both the ILC and CLIC linear colliders for bunch alignment. Consideration of bunch structure and size constraints favour a 3.9 GHz superconducting, multi-cell cavity as the solution for ILC, whilst bunch structure and beam-loading considerations suggest an X-band copper travelling wave structure for CLIC. These two cavity solutions are very different in design but share complex design issues. Phase stabilisation, beam loading, wakefields and mode damping are fundamental issues for these crab cavities. Requirements and potential design solutions will be discussed for both colliders.
Crab cavities for linear colliders
Burt, G; Carter, R; Dexter, A; Tahir, I; Beard, C; Dykes, M; Goudket, P; Kalinin, A; Ma, L; McIntosh, P; Shulte, D; Jones, Roger M; Bellantoni, L; Chase, B; Church, M; Khabouline, T; Latina, A; Adolphsen, C; Li, Z; Seryi, Andrei; Xiao, L
2008-01-01
Crab cavities have been proposed for a wide number of accelerators and interest in crab cavities has recently increased after the successful operation of a pair of crab cavities in KEK-B. In particular crab cavities are required for both the ILC and CLIC linear colliders for bunch alignment. Consideration of bunch structure and size constraints favour a 3.9 GHz superconducting, multi-cell cavity as the solution for ILC, whilst bunch structure and beam-loading considerations suggest an X-band copper travelling wave structure for CLIC. These two cavity solutions are very different in design but share complex design issues. Phase stabilisation, beam loading, wakefields and mode damping are fundamental issues for these crab cavities. Requirements and potential design solutions will be discussed for both colliders.
Magneto-convective instabilities in horizontal cavities
Mistrangelo, Chiara; Bühler, Leo
2016-02-01
A linear stability analysis is performed to investigate the onset of convective motions in a flat cavity filled with liquid metal. A volumetric heat source is uniformly distributed in the fluid and a horizontal magnetic field is imposed. Walls perpendicular to the magnetic field are thermally insulating, and the top wall is isothermal and the bottom adiabatic. When a magnetic field is applied, electromagnetic forces tend to transform 3D convective flow structures into quasi-2D rolls aligned to the magnetic field. By integrating 3D equations along magnetic field lines, a quasi-2D mathematical model has been derived. A dissipation term in the 2D equations accounts for 3D viscous effects in boundary layers at Hartmann walls perpendicular to the magnetic field. The influence of various parameters on flow stability is investigated. The flow is stabilized by increasing the magnetic field intensity or the electric conductance of Hartmann walls and by reducing the aspect ratio of the cavity. Numerical simulations are performed to verify the analytical results and to describe the main convective flow patterns in the non-linear regime.
Porous photonic crystal external cavity laser biosensor
Huang, Qinglan; Peh, Jessie; Hergenrother, Paul J.; Cunningham, Brian T.
2016-08-01
We report the design, fabrication, and testing of a photonic crystal (PC) biosensor structure that incorporates a porous high refractive index TiO2 dielectric film that enables immobilization of capture proteins within an enhanced surface-area volume that spatially overlaps with the regions of resonant electromagnetic fields where biomolecular binding can produce the greatest shifts in photonic crystal resonant wavelength. Despite the nanoscale porosity of the sensor structure, the PC slab exhibits narrowband and high efficiency resonant reflection, enabling the structure to serve as a wavelength-tunable element of an external cavity laser. In the context of sensing small molecule interactions with much larger immobilized proteins, we demonstrate that the porous structure provides 3.7× larger biosensor signals than an equivalent nonporous structure, while the external cavity laser (ECL) detection method provides capability for sensing picometer-scale shifts in the PC resonant wavelength caused by small molecule binding. The porous ECL achieves a record high figure of merit for label-free optical biosensors.
Porous photonic crystal external cavity laser biosensor
Huang, Qinglan [Department of Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States); Peh, Jessie; Hergenrother, Paul J. [Department of Chemistry, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States); Cunningham, Brian T. [Department of Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States); Department of Bioengineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States)
2016-08-15
We report the design, fabrication, and testing of a photonic crystal (PC) biosensor structure that incorporates a porous high refractive index TiO{sub 2} dielectric film that enables immobilization of capture proteins within an enhanced surface-area volume that spatially overlaps with the regions of resonant electromagnetic fields where biomolecular binding can produce the greatest shifts in photonic crystal resonant wavelength. Despite the nanoscale porosity of the sensor structure, the PC slab exhibits narrowband and high efficiency resonant reflection, enabling the structure to serve as a wavelength-tunable element of an external cavity laser. In the context of sensing small molecule interactions with much larger immobilized proteins, we demonstrate that the porous structure provides 3.7× larger biosensor signals than an equivalent nonporous structure, while the external cavity laser (ECL) detection method provides capability for sensing picometer-scale shifts in the PC resonant wavelength caused by small molecule binding. The porous ECL achieves a record high figure of merit for label-free optical biosensors.
Optomechanic interaction in a corrugated phoxonic nanobeam cavity
Oudich, Mourad; El-Jallal, Said; Pennec, Yan; Djafari-Rouhani, Bahram; Gomis-Bresco, Jordi; Navarro-Urrios, Daniel; Sotomayor Torres, Clivia M.; Martínez, Alejandro; Makhoute, Abdelkader
2014-06-01
The interaction between phonons and photons is investigated theoretically in a phoxonic cavity inside a corrugated nanobeam waveguide presenting band gaps for both electromagnetic and elastic waves. The structure is made by drilling periodic holes on a silicon nanobeam with lateral periodic stubs and the tapered cavity is constructed by changing gradually the geometrical parameters of both the holes and stubs. We show that this kind of cavity displays localized phonons and photons inside the gaps, which can enhance their interaction and also promotes the presence of many optical confined modes with high quality factor. Using the finite-element method, we demonstrate that with appropriate design of the tapering construction, one can control the cavity modes frequency without altering significantly the quality factor of the photonic modes. By changing the tapering rates over the lattice constants, we establish the possibility of shifting the phononic cavity modes frequency to place them inside the desired gap, which enhances their confinement and increases the mechanical quality factor while keeping the strength of the optomechanic coupling high. In our calculations, we take account of both mechanisms that contribute to the acousto-optic interaction, namely photoelastic and interface motion effects. We show that in our case, these two effects can contribute additively to give high coupling strength between phononic and photonic cavity modes. The calculations of the coupling coefficient which gives the phonon-photon coupling strength give values as high as 2 MHz while photonic cavity modes display quality factor of 105 and even values up to 3.4 MHz but with smaller photonic quality factors.
Inhomogeneous field in cavities of zero index metamaterials
Fu, Yangyang; Xu, Yadong; Chen, Huangyang
2015-01-01
In common media, electromagnetic wave always possesses a fluctuant field variation, analogous to an undulant surface of sea. While electromagnetic wave in the media with zero index metamaterials (ZIMs), whose refractive indices are near zero, homogeneous or constant field distribution will emerge, resembling a tranquil surface of lake. Such impression almost could be found in all previous literatures related to ZIMs. However, in this letter, we theoretically and numerically find that, in a cavity structure with ZIMs, when higher order modes (e.g., dipole modes) are excited inside cavity, inhomogeneous field could take place in ZIMs. Such a finding challenges the common perception in ZIMs: It is generally considered that homogeneous or constant field is generated in ZIMs. In addition, the proposed cavity structure herein could be used to manipulate radiation of light, such as enhancing or suppressing radiation, controlling radiation pattern and achieving isotropic or directive radiation, thereby potential applications are expected. These effects are well confirmed by numerical simulations. PMID:26080276
1983-01-01
In each ISR ring the radiofrequency cavities were installed in one 9 m long straight section. The RF system of the ISR had the main purpose to stack buckets of particles (most of the time protons)coming from the CPS and also to accelerate the stacked beam. The installed RF power per ring was 18 kW giving a peak accelerating voltage of 20 kV. The system had a very fine regulation feature allowing to lower the voltage down to 75 V in a smooth and well controlled fashion.
Cavity Optomechanical Magnetometer
Forstner, S; Knittel, J; van Ooijen, E D; Swaim, J D; Harris, G I; Szorkovszky, A; Bowen, W P; Rubinsztein-Dunlop, H
2011-01-01
A cavity optomechanical magnetometer is demonstrated where the magnetic field induced expansion of a magnetostrictive material is transduced onto the physical structure of a highly compliant optical microresonator. The resulting motion is read out optically with ultra-high sensitivity. Detecting the magnetostrictive deformation of Terfenol-D with a toroidal whispering gallery mode (TWGM) resonator a peak sensitivity of 400 nT/Hz^.5 was achieved with theoretical modelling predicting that sensitivities of up to 500 fT/Hz^.5 may be possible. This chip-based magnetometer combines high-sensitivity and large dynamic range with small size and room temperature operation.
Cavity optomechanical magnetometer.
Forstner, S; Prams, S; Knittel, J; van Ooijen, E D; Swaim, J D; Harris, G I; Szorkovszky, A; Bowen, W P; Rubinsztein-Dunlop, H
2012-03-23
A cavity optomechanical magnetometer is demonstrated. The magnetic-field-induced expansion of a magnetostrictive material is resonantly transduced onto the physical structure of a highly compliant optical microresonator and read out optically with ultrahigh sensitivity. A peak magnetic field sensitivity of 400 nT Hz(-1/2) is achieved, with theoretical modeling predicting the possibility of sensitivities below 1 pT Hz(-1/2). This chip-based magnetometer combines high sensitivity and large dynamic range with small size and room temperature operation.
Applied electromagnetic scattering theory
Osipov, Andrey A
2017-01-01
Besides classical applications (radar and stealth, antennas, microwave engineering), scattering and diffraction are enabling phenomena for some emerging research fields (artificial electromagnetic materials or metamaterials, terahertz technologies, electromagnetic aspects of nano-science). This book is a tutorial for advanced students who need to study diffraction theory. The textbook gives fundamental knowledge about scattering and diffraction of electromagnetic waves and provides some working examples of solutions for practical high-frequency scattering and diffraction problems. The book focuses on the most important diffraction effects and mechanisms influencing the scattering process and describes efficient and physically justified simulation methods - physical optics (PO) and the physical theory of diffraction (PTD) - applicable in typical remote sensing scenarios. The material is presented in a comprehensible and logical form, which relates the presented results to the basic principles of electromag...
Electromagnetic pollution. Screens accused
Vincent, J.
1996-04-01
A recent experiment carried out by M. Bastide (Montpellier University, France) has shown an important increase of mortality, immunosuppression and morphological changes for chicks embryos when submitted to the very low frequency electromagnetic field of a personal computer screen during incubation. Similar effects on pregnant women working in front of cathode ray tubes have never been demonstrated. The paper gives an overview of the epidemiological studies carried out so far to determine the possible noxious effects of electromagnetic fields on public health. In particular, EdF (Electricite de France) has started three different inquiries involving 400000 workmens from electric power industry in order to determine some possible correlation between the exposure to electromagnetic fields and the occurrence of leukemias, brain tumors and melanomas. William Dab, from EdF Medical Studies Service indicates that only a very small relation with the occurrence of brain tumors and acute myeloid leukemias have been shown so far. (J.S.). 4 refs., 2 photos.
Valagiannopoulos, Constantinos A; Simovski, Constantin R; Tretyakov, Sergei A; Maslovski, Stanislav I
2015-01-01
The ideal black body fully absorbs all incident rays, that is, all propagating waves created by arbitrary sources. The known idealized realization of a black body is the perfectly matched layer (PML), widely used in numerical electromagnetics. However, ideal black bodies and PMLs do not interact with evanescent fields existing near any finite-size source, and the energy stored in these fields cannot be harvested. Here we introduce the concept of the ideal conjugate matched layer (CML), which fully absorbs energy of both propagating and evanescent fields of sources acting as an ideal sink for electromagnetic energy. Conjugate matched absorbers have exciting application potentials, as resonant attractors of electromagnetic energy into the absorber volume. We derive the conditions on the constitutive parameters of media which can serve as CML materials, numerically study the performance of planar and cylindrical CML and discuss possible realizations of such materials as metal-dielectric composites.
Aircraft electromagnetic compatibility
Clarke, Clifton A.; Larsen, William E.
1987-06-01
Illustrated are aircraft architecture, electromagnetic interference environments, electromagnetic compatibility protection techniques, program specifications, tasks, and verification and validation procedures. The environment of 400 Hz power, electrical transients, and radio frequency fields are portrayed and related to thresholds of avionics electronics. Five layers of protection for avionics are defined. Recognition is given to some present day electromagnetic compatibility weaknesses and issues which serve to reemphasize the importance of EMC verification of equipment and parts, and their ultimate EMC validation on the aircraft. Proven standards of grounding, bonding, shielding, wiring, and packaging are laid out to help provide a foundation for a comprehensive approach to successful future aircraft design and an understanding of cost effective EMC in an aircraft setting.
Electromagnetic induction studies
Hermance, J. F.
1983-04-01
Recent developments in electromagnetic induction studies of the lithosphere and the asthenosphere are reviewed. Attention is given to geoelectrical studies of active tectonic areas in terms of the major zones of crustal extension, the basin and range province along western regions of North America, and the Rio Grande rift. Studies have also been performed of tectonic activity around Iceland, the Salton Trough and Cerro Prieto, and the subduction zones of the Cascade Mountains volcanic belt, where magnetotelluric and geomagnetic variation studies have been done. Geomagnetic variations experiments have been reported in the Central Appalachians, and submarine electromagnetic studies along the Juan de Fuca ridge. Controlled source electromagnetic and dc resistivity investigations have been carried out in Nevada, Hawaii, and in the Adirondacks Mountains. Laboratory examinations on the conductivity of representative materials over a broad range of temperature, pressure, and chemistry are described.
Park, Hyekyoung; Delayen, Jean
2017-01-01
A theory of surface resistance of superconductor was rigorously formulated by Bardeen, Cooper, Schrieffer more than 50 years ago. Since then the accelerator community has been used the theory as a guideline to improve the surface resistance of the superconducting cavity. It has been observed that the surface resistance is dependent on frequency, temperature and rf field strength, and surface preparation. To verify these dependences, a well-controlled study is required. Although many different types of cavities have been tested, the typical superconducting cavities are built for specific frequencies of their application. They do not provide data other than at its own frequency. A superconducting half wave cavity is a cavity that enables us to collect the surface resistance data across frequencies of interest for particle accelerators and evaluate preparation techniques. This paper will present the design of the half wave cavity, its electromagnetic mode characteristics and experimental results. Research supported by NSF Award PHY-1416051.
Applications of cavity optomechanics
Metcalfe, Michael
2014-09-01
"Cavity-optomechanics" aims to study the quantum properties of mechanical systems. A common strategy implemented in order to achieve this goal couples a high finesse photonic cavity to a high quality factor mechanical resonator. Then, using feedback forces such as radiation pressure, one can cool the mechanical mode of interest into the quantum ground state and create non-classical states of mechanical motion. On the path towards achieving these goals, many near-term applications of this field have emerged. After briefly introducing optomechanical systems and describing the current state-of-the-art experimental results, this article summarizes some of the more exciting practical applications such as ultra-sensitive, high bandwidth accelerometers and force sensors, low phase noise x-band integrated microwave oscillators and optical signal processing such as optical delay-lines, wavelength converters, and tunable optical filters. In this rapidly evolving field, new applications are emerging at a fast pace, but this article concentrates on the aforementioned lab-based applications as these are the most promising avenues for near-term real-world applications. New basic science applications are also becoming apparent such as the generation of squeezed light, testing gravitational theories and for providing a link between disparate quantum systems.
Nai, Gisele Alborghetti; Stuani, Maria Luiza de Toledo; Stuani, Luís Antonio Sasso
2011-01-01
Mycetoma is a pathological process in which eumycotic (fungal) or actinomycotic causative agents from exogenous source produce grains. It is a localized chronic and deforming infectious disease of subcutaneous tissue, skin and bones. We report the first case of eumycetoma of the oral cavity in world literature. A 43-year-old male patient, complaining of swelling and fistula in the hard palate. On examination, swelling of the anterior and middle hard palate, with fistula draining a dark liquid was observed. The panoramic radiograph showed extensive radiolucent area involving the region of teeth 21-26 and the computerized tomography showed communication with the nasal cavity, suggesting the diagnosis of periapical cyst. Surgery was performed to remove the lesion. Histopathological examination revealed purulent material with characteristic grain. Gram staining for bacteria was negative and Grocott-Gomori staining for the detection of fungi was positive, concluding the diagnosis of eumycetoma. The patient was treated with ketoconazole for nine months, and was considered cured at the end of treatment. Histopathological examination, using histochemical staining, and direct microscopic grains examination can provide the distinction between eumycetoma and actinomycetoma accurately.
Gisele Alborghetti Nai
2011-06-01
Full Text Available Mycetoma is a pathological process in which eumycotic (fungal or actinomycotic causative agents from exogenous source produce grains. It is a localized chronic and deforming infectious disease of subcutaneous tissue, skin and bones. We report the first case of eumycetoma of the oral cavity in world literature. CASE REPORT: A 43-year-old male patient, complaining of swelling and fistula in the hard palate. On examination, swelling of the anterior and middle hard palate, with fistula draining a dark liquid was observed. The panoramic radiograph showed extensive radiolucent area involving the region of teeth 21-26 and the computerized tomography showed communication with the nasal cavity, suggesting the diagnosis of periapical cyst. Surgery was performed to remove the lesion. Histopathological examination revealed purulent material with characteristic grain. Gram staining for bacteria was negative and Grocott-Gomori staining for the detection of fungi was positive, concluding the diagnosis of eumycetoma. The patient was treated with ketoconazole for nine months, and was considered cured at the end of treatment. CONCLUSION: Histopathological examination, using histochemical staining, and direct microscopic grains examination can provide the distinction between eumycetoma and actinomycetoma accurately.
Applications of cavity optomechanics
Metcalfe, Michael [Booz Allen Hamilton, 3811 Fairfax Drive, Arlington, Virginia 22203 (United States)
2014-09-15
“Cavity-optomechanics” aims to study the quantum properties of mechanical systems. A common strategy implemented in order to achieve this goal couples a high finesse photonic cavity to a high quality factor mechanical resonator. Then, using feedback forces such as radiation pressure, one can cool the mechanical mode of interest into the quantum ground state and create non-classical states of mechanical motion. On the path towards achieving these goals, many near-term applications of this field have emerged. After briefly introducing optomechanical systems and describing the current state-of-the-art experimental results, this article summarizes some of the more exciting practical applications such as ultra-sensitive, high bandwidth accelerometers and force sensors, low phase noise x-band integrated microwave oscillators and optical signal processing such as optical delay-lines, wavelength converters, and tunable optical filters. In this rapidly evolving field, new applications are emerging at a fast pace, but this article concentrates on the aforementioned lab-based applications as these are the most promising avenues for near-term real-world applications. New basic science applications are also becoming apparent such as the generation of squeezed light, testing gravitational theories and for providing a link between disparate quantum systems.
Superconducting dipole electromagnet
Purcell, John R.
1977-07-26
A dipole electromagnet of especial use for bending beams in particle accelerators is wound to have high uniformity of magnetic field across a cross section and to decrease evenly to zero as the ends of the electromagnet are approached by disposing the superconducting filaments of the coil in the crescent-shaped nonoverlapping portions of two intersecting circles. Uniform decrease at the ends is achieved by causing the circles to overlap increasingly in the direction of the ends of the coil until the overlap is complete and the coil is terminated.
Improved Electromagnetic Brake
Martin, Toby B.
2004-01-01
A proposed design for an electromagnetic brake would increase the reliability while reducing the number of parts and the weight, relative to a prior commercially available electromagnetic brake. The reductions of weight and the number of parts could also lead to a reduction of cost. A description of the commercial brake is prerequisite to a description of the proposed electromagnetic brake. The commercial brake (see upper part of figure) includes (1) a permanent magnet and an electromagnet coil on a stator and (2) a rotor that includes a steel contact plate mounted, with tension spring loading, on an aluminum hub. The stator is mounted securely on a stationary object, which would ordinarily be the housing of a gear drive or a motor. The rotor is mounted on the shaft of the gear drive or motor. The commercial brake nominally operates in a fail-safe (in the sense of normally braking) mode: In the absence of current in the electromagnet coil, the permanent magnet pulls the contact plate, against the spring tension, into contact with the stator. To release the brake, one excites the electromagnet with a current of the magnitude and polarity chosen to cancel the magnetic flux of the permanent magnet, thereby enabling the spring tension to pull the contact plate out of contact with the stator. The fail-safe operation of the commercial brake depends on careful mounting of the rotor in relation to the stator. The rotor/stator gap must be set with a tolerance between 10 and 15 mils (between about 0.25 and about 0.38 mm). If the gap or the contact pad is thicker than the maximum allowable value, then the permanent magnetic field will not be strong enough to pull the steel plate across the gap. (For this reason, any contact pad between the contact plate and the stator must also be correspondingly thin.) If the gap exceeds the maximum allowable value because of shaft end play, it becomes impossible to set the brake by turning off the electromagnet current. Although it may
Dynamic electromagnetic metamaterials
Kebin Fan
2015-01-01
Full Text Available Electromagnetic metamaterials are designer materials made from ‘artificial atoms’ which provide unprecedented control over light matter interactions. Metamaterials are fashioned to yield a specific response to the electric and magnetic components of light and have realized a multitude of exotic properties difficult to achieve with natural materials. Having matured over the last decade and a half, researchers now look toward realizing applications of metamaterials. The ability to dynamically control novel responses exhibited by electromagnetic metamaterials would bolster this quest thus ushering in the next revolution in materials.
Essentials of Computational Electromagnetics
Sheng, Xin-Qing
2012-01-01
Essentials of Computational Electromagnetics provides an in-depth introduction of the three main full-wave numerical methods in computational electromagnetics (CEM); namely, the method of moment (MoM), the finite element method (FEM), and the finite-difference time-domain (FDTD) method. Numerous monographs can be found addressing one of the above three methods. However, few give a broad general overview of essentials embodied in these methods, or were published too early to include recent advances. Furthermore, many existing monographs only present the final numerical results without specifyin
Das, Ashok
2013-01-01
These lecture notes on electromagnetism have evolved from graduate and undergraduate EM theory courses given by the author at the University of Rochester, with the basics presented with clarity and his characteristic attention to detail. The thirteen chapters cover, in logical sequence, topics ranging from electrostatics, magnetostatics and Maxwell's equations to plasmas and radiation. Boundary value problems are treated extensively, as are wave guides, electromagnetic interactions and fields. This second edition comprises many of the topics expanded with more details on the derivation of vari
The theory of electromagnetism
Jones, D S
1964-01-01
The Theory of the Electomagnetism covers the behavior of electromagnetic fields and those parts of applied mathematics necessary to discover this behavior. This book is composed of 11 chapters that emphasize the Maxwell's equations. The first chapter is concerned with the general properties of solutions of Maxwell's equations in matter, which has certain macroscopic properties. The succeeding chapters consider specific problems in electromagnetism, including the determination of the field produced by a variable charge, first in isolation and then in the surface distributions of an antenna. The
Electromagnetic fields and interactions
Becker, Richard
1982-01-01
For more than a century, ""Becker"" and its forerunner, ""Abraham-Becker,"" have served as the bible of electromagnetic theory for countless students. This definitive translation of the physics classic features both volumes of the original text.Volume I, on electromagnetic theory, includes an introduction to vector and tensor calculus, the electrostatic field, electric current and the field, and the theory of relativity. The second volume comprises a self-contained introduction to quantum theory that covers the classical principles of electron theory and quantum mechanics, problems involving
Electromagnetic induction in Australia
Lilley, F. E. M.
Electromagnetic induction at the terrestrial surface is a general and ubiquitous process. This note, which covers research on the subject in Australia, reflects the writer's own interest and refers particularly to induction by natural source fields in the period range of 1 minute to 1 day.Such source fields arise external to Earth, in the ionosphere and beyond, in the magnetosphere. The process of electromagnetic induction by these fields involves the flow through Earth of tens of thousands of amperes, over scale lengths of thousands of kilometers.
Electromagnetic clutches and couplings
Vorob'Yeva, T M; Fry, D W; Higinbotham, W
2013-01-01
Electromagnetic Clutches and Couplings contains a detailed description of U.S.S.R. electromagnetic friction clutches, magnetic couplings, and magnetic particle couplings. This book is divided into four chapters. The first chapter discusses the design and construction of magnetic (solenoid-operated) couplings, which are very quick-acting devices and used in low power high-speed servo-systems. Chapter 2 describes the possible fields of application, design, construction, and utilization of magnetic particle couplings. The aspects of construction, design, and utilization of induction clutches (sli
焦重庆; 李月月
2015-01-01
According to the reciprocity principle, we propose an efficient model to compute the shielding effectiveness of a rectangular cavity with apertures covered by conductive sheet against an external incident electromagnetic wave. This problem is converted into another problem of solving the electromagnetic field leakage from the cavity when the cavity is excited by an electric dipole placed within it. By the combination of the unperturbed cavity field and the transfer impedance of the sheet, the tangential electric field distribution on the outer surface of the sheet is obtained. Then, the field distribution is regarded as an equivalent surface magnetic current source responsible for the leakage field. The validation of this model is verified by a comparison with the circuital model and the full-wave simulations. This time-saving model can deal with arbitrary aperture shape, various wave propagation and polarization directions, and the near-field effect.
Cavity coalescence in superplastic deformation
Stowell, M.J.; Livesey, D.W.; Ridley, N.
1984-01-01
An analysis of the probability distribution function of particles randomly dispersed in a solid has been applied to cavitation during superplastic deformation and a method of predicting cavity coalescence developed. Cavity size distribution data were obtained from two microduplex nickel-silver alloys deformed superplastically to various extents at elevated temperature, and compared to theoretical predictions. Excellent agreement occurred for small void sizes but the model underestimated the number of voids in the largest size groups. It is argued that the discrepancy results from a combination of effects due to non-random cavity distributions and to enhanced growth rates and incomplete spheroidization of the largest cavities.
Wang, Shaoheng [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Guo, Jiquan [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Wang, Haipeng [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Rimmer, Robert A. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)
2016-05-01
The initial design of a low higher order modes (HOM) impedance superconducting RF (SRF) cavity is presented in this paper. The design of this SRF cavity is for the proposed Jefferson Lab Electron Ion Collider (JLEIC). The electron ring of JLEIC will operate with electrons of 3 to 10 GeV energy. The ion ring of JLEIC will operate with protons of up to 100 GeV energy. The bunch lengths in both rings are ~12 mm (RMS). In order to maintain the short bunch length in the ion ring, SRF cavities are adopted to provide large enough gradient. In the first phase of JLEIC, the PEP II RF cavities will be reused in the electron ring to lower the initial cost. The frequency of the SRF cavities is chosen to be the second harmonic of PEP II cavities, 952.6 MHz. In the second phase of JLEIC, the same frequency SRF cavities may replace the normal conducting PEP II cavities to achieve higher luminosity at high energy. At low energies, the synchro-tron radiation damping effect is quite weak, to avoid the coupled bunch instability caused by the intense closely-spaced electron bunches, low HOM impedance of the SRF cavities combined with longitudinal feedback sys-tem will be necessary.
Nanofriction in Cavity Quantum Electrodynamics.
Fogarty, T; Cormick, C; Landa, H; Stojanović, Vladimir M; Demler, E; Morigi, Giovanna
2015-12-01
The dynamics of cold trapped ions in a high-finesse resonator results from the interplay between the long-range Coulomb repulsion and the cavity-induced interactions. The latter are due to multiple scatterings of laser photons inside the cavity and become relevant when the laser pump is sufficiently strong to overcome photon decay. We study the stationary states of ions coupled with a mode of a standing-wave cavity as a function of the cavity and laser parameters, when the typical length scales of the two self-organizing processes, Coulomb crystallization and photon-mediated interactions, are incommensurate. The dynamics are frustrated and in specific limiting cases can be cast in terms of the Frenkel-Kontorova model, which reproduces features of friction in one dimension. We numerically recover the sliding and pinned phases. For strong cavity nonlinearities, they are in general separated by bistable regions where superlubric and stick-slip dynamics coexist. The cavity, moreover, acts as a thermal reservoir and can cool the chain vibrations to temperatures controlled by the cavity parameters and by the ions' phase. These features are imprinted in the radiation emitted by the cavity, which is readily measurable in state-of-the-art setups of cavity quantum electrodynamics.
Electromagnetic interference: a radiant future!
Leferink, Frank Bernardus Johannes
2015-01-01
Although Electromagnetic Interference and Electromagnetic Compatibility are well established domains, the introduction of new technologies results in new challenges. Changes in both measurement techniques, and technological trends resulting in new types of interference are described. These are the S
Electromagnetic interference: a radiant future!
Leferink, Frank Bernardus Johannes
2015-01-01
Although Electromagnetic Interference and Electromagnetic Compatibility are well established domains, the introduction of new technologies results in new challenges. Changes in both measurement techniques, and technological trends resulting in new types of interference are described. These are the
Electromagnetic fields in stratified media
Li, Kai
2009-01-01
Dealing with an important branch of electromagnetic theory with many useful applications in subsurface communication, radar, and geophysical prospecting and diagnostics, this book introduces electromagnetic theory and wave propagation in complex media.
New perspectives on classical electromagnetism
Cote, Paul J.
2009-01-01
The fallacies associated with the gauge concept in electromagnetism are illustrated. A clearer and more valid formulation of the basics of classical electromagnetism is provided by recognizing existing physical constraints as well as the physical reality of the vector potential.
Electromagnetic Force on a Brane
Li, Li-Xin
2016-01-01
A fundamental assumption in the theory of brane world is that all matter and radiation are confined on the four-dimensional brane and only gravitons can propagate in the five-dimensional bulk spacetime. The brane world theory did not provide an explanation for the existence of electromagnetic fields and the origin of the electromagnetic field equation. In this paper, we propose a model for explaining the existence of electromagnetic fields on a brane and deriving the electromagnetic field equation. Similar to the case in Kaluza-Klein theory, we find that electromagnetic fields and the electromagnetic field equation can be derived from the five-dimensional Einstein field equation. However, the derived electromagnetic field equation differs from the Maxwell equation by containing a term with the electromagnetic potential vector coupled to the spacetime curvature tensor. So it can be considered as generalization of the Maxwell equation in a curved spacetime. The gravitational field equation on the brane is also ...
A Detection Scheme for Cavity-based Dark Matter Searches
Bukhari, M H S
2016-01-01
We present here proposal of a scheme and some useful ideas for resonant cavity-based detection of cold dark matter axions with hope to improve the existing endeavors. The scheme is based upon our idea of a detector, which incorporates an integrated tunnel diode and a GaAs HEMT or HFET, High Electron Mobility Transistor or Heterogenous FET, for resonance detection and amplification from a resonant cavity (in a strong transverse magnetic field from a cylindrical array of halbach magnets). The idea of a TD-oscillator-amplifier combination could possibly serve as a more sensitive and viable resonance detection regime while maintaining an excellent performance with low noise temperature, whereas the halbach magnets array may offer a compact and permanent solution replacing the conventional electromagnets scheme. We believe that all these factors could possibly increase the sensitivity and accuracy of axion detection searches and reduce complications (and associated costs) in the experiments, in addition to help re...
High-Altitude Electromagnetic Pulse (HEMP) Testing
2015-07-09
Electromagnetic Pulse Horizontal Electromagnetic Pulse Advanced Fast Electromagnetic Pulse Nuclear Weapons Effect Testing and Environments 16. SECURITY...TOP 01-2-620A 9 July 2015 G-1 APPENDIX G. ABBREVIATIONS. AFEMP Advanced Fast Electromagnetic ... Electromagnetic Pulse A burst of electromagnetic radiation from a nuclear explosion or a suddenly fluctuating magnetic field. The resulting electric and
Simple Superconducting "Permanent" Electromagnet
Israelson, Ulf E.; Strayer, Donald M.
1992-01-01
Proposed short tube of high-temperature-superconducting material like YBa2Cu3O7 acts as strong electromagnet that flows as long as magnetic field remains below critical value and temperature of cylinder maintained sufficiently below superconducting-transition temperature. Design exploits maximally anisotropy of high-temperature-superconducting material.
Nanofocusing of electromagnetic radiation
Gramotnev, D. K.; Bozhevolnyi, Sergey I.
2014-01-01
Nanofocusing of electromagnetic radiation, that is, reducing the cross sections of propagating optical modes far beyond the diffraction limit in dielectric media, can be achieved in tapered metal-dielectric waveguides that support surface plasmon-polariton modes. Although the main principles...
Manifestly covariant electromagnetism
Hillion, P. [Institut Henri Poincare' , Le Vesinet (France)
1999-03-01
The conventional relativistic formulation of electromagnetism is covariant under the full Lorentz group. But relativity requires covariance only under the proper Lorentz group and the authors present here the formalism covariant under the complex rotation group isomorphic to the proper Lorentz group. The authors discuss successively Maxwell's equations, constitutive relations and potential functions. A comparison is made with the usual formulation.
"Hearing" Electromagnetic Waves
Rojo, Marta; Munoz, Juan
2014-01-01
In this work, an educational experience is described in which a microwave communication link is used to make students aware that all electromagnetic waves have the same physical nature and properties. Experimental demonstrations are linked to theoretical concepts to increase comprehension of the physical principles underlying electromagnetic…
"Hearing" Electromagnetic Waves
Rojo, Marta; Munoz, Juan
2014-01-01
In this work, an educational experience is described in which a microwave communication link is used to make students aware that all electromagnetic waves have the same physical nature and properties. Experimental demonstrations are linked to theoretical concepts to increase comprehension of the physical principles underlying electromagnetic…
Equivalence principles and electromagnetism
Ni, W.-T.
1977-01-01
The implications of the weak equivalence principles are investigated in detail for electromagnetic systems in a general framework. In particular, it is shown that the universality of free-fall trajectories (Galileo weak equivalence principle) does not imply the validity of the Einstein equivalence principle. However, the Galileo principle plus the universality of free-fall rotation states does imply the Einstein principle.
Observation of Electromagnetically Induced Transparency by a Train of Short Pulses
YE Cun-Yun
2004-01-01
@@ We report the experimental demonstration of electromagnetically induced transparency in hot rubidium (85 Rb)atomic vapour by using an actively mode-locked external cavity diode laser in Littman-Metcalf configuration.We can make opaque resonant transitions transparent to any two optical comb components in the pulse trains which excite atomic coherence in the ground states of 85Rb.
Stability of gravitating charged-scalar solitons in a cavity
Ponglertsakul, Supakchai; Dolan, Sam R
2016-01-01
We present new regular solutions of Einstein-charged scalar field theory in a cavity. The system is enclosed inside a reflecting mirror-like boundary, on which the scalar field vanishes. The mirror is placed at the zero of the scalar field closest to the origin, and inside this boundary our solutions are regular. We study the stability of these solitons under linear, spherically symmetric perturbations of the metric, scalar and electromagnetic fields. If the radius of the mirror is sufficiently large, we present numerical evidence for the stability of the solitons. For small mirror radius, some of the solitons are unstable. We discuss the physical interpretation of this instability.
Skidmore, Jonathan; Doyle, Hugo; Tully, Brett; Betney, Matthew; Foster, Peta; Ringrose, Tim; Ramasamy, Rohan; Parkin, James; Edwards, Tom; Hawker, Nicholas
2016-10-01
Results from the experimental investigation of cavity collapse driven by a strong planar shock (>6km/s) are presented. Data from high speed framing cameras, laser backlit diagnostics and time-resolved pyromety are used to validate the results of hydrodynamic front-tracking simulations. As a code validation exercise, a 2-stage light gas gun was used to accelerate a 1g Polycarbonate projectile to velocities exceeding 6km/s; impact with a PMMA target containing a gas filled void results in the formation of a strong shockwave with pressures exceeding 1Mbar. The subsequent phenomena associated with the collapse of the void and excitation of the inert gas fill are recorded and compared to simulated data. Variation of the mass density and atomic number of the gas fill is used to alter the plasma parameters furthering the extent of the code validation.
Mader, Matthias; Hänsch, Theodor W; Hunger, David
2014-01-01
Imaging of the optical properties of individual nanosystems beyond fluorescence can provide a wealth of information. However, the minute signals for absorption and dispersion are challenging to observe, and only specialized techniques requiring sophisticated noise rejection are available. Here we use signal enhancement in a scanning optical microcavity to demonstrate ultra-sensitive imaging. Harnessing multiple interactions of probe light with a sample within an optical resonator, we achieve a 1700-fold signal enhancement compared to diffraction-limited microscopy. We demonstrate quantitative imaging of the extinction cross section of gold nanoparticles with a sensitivity below 1 nm2, we show a method to improve spatial resolution potentially below the diffraction limit by using higher order cavity modes, and we present measurements of the birefringence and extinction contrast of gold nanorods. The demonstrated simultaneous enhancement of absorptive and dispersive signals promises intriguing potential for opt...
Towards achieving strong coupling in three-dimensional-cavity with solid state spin resonance
Le Floch, J.-M.; Delhote, N.; Aubourg, M.; Madrangeas, V.; Cros, D.; Castelletto, S.; Tobar, M. E.
2016-04-01
We investigate the microwave magnetic field confinement in several microwave three-dimensional (3D)-cavities, using a 3D finite-element analysis to determine the best design and achieve a strong coupling between microwave resonant cavity photons and solid state spins. Specifically, we design cavities for achieving strong coupling of electromagnetic modes with an ensemble of nitrogen vacancy (NV) defects in diamond. We report here a novel and practical cavity design with a magnetic filling factor of up to 4 times (2 times higher collective coupling) than previously achieved using one-dimensional superconducting cavities with a small mode volume. In addition, we show that by using a double-split resonator cavity, it is possible to achieve up to 200 times better cooperative factor than the currently demonstrated with NV in diamond. These designs open up further opportunities for studying strong and ultra-strong coupling effects on spins in solids using alternative systems with a wider range of design parameters. The strong coupling of paramagnetic spin defects with a photonic cavity is used in quantum computer architecture, to interface electrons spins with photons, facilitating their read-out and processing of quantum information. To achieve this, the combination of collective coupling of spins and cavity mode is more feasible and offers a promising method. This is a relevant milestone to develop advanced quantum technology and to test fundamental physics principles.
Frequency Tuning for a DQW Crab Cavity
Verdú-Andrés, Silvia; Ben-Zvi, Ilan; Calaga, Rama; Capatina, Ofelia; Leuxe, Raphael; Skaritka, John; Wu, Qiong; Xiao, Binping; Zanoni, Carlo
2016-01-01
The nominal operating frequency for the HL-LHC crab cavities is 400.79 MHz within a bandwidth of ±60kHz. Attaining the required cavity tune implies a good understanding of all the processes that influence the cavity frequency from the moment when the cavity parts are being fabricated until the cavity is installed and under operation. Different tuning options will be available for the DQW crab cavity of LHC. This paper details the different steps in the cavity fabrication and preparation that may introduce a shift in the cavity frequency and introduces the different tuning methods foreseen to bring the cavity frequency to meet the specifications.
Computational Electronics and Electromagnetics
DeFord, J.F.
1993-03-01
The Computational Electronics and Electromagnetics thrust area is a focal point for computer modeling activities in electronics and electromagnetics in the Electronics Engineering Department of Lawrence Livermore National Laboratory (LLNL). Traditionally, they have focused their efforts in technical areas of importance to existing and developing LLNL programs, and this continues to form the basis for much of their research. A relatively new and increasingly important emphasis for the thrust area is the formation of partnerships with industry and the application of their simulation technology and expertise to the solution of problems faced by industry. The activities of the thrust area fall into three broad categories: (1) the development of theoretical and computational models of electronic and electromagnetic phenomena, (2) the development of useful and robust software tools based on these models, and (3) the application of these tools to programmatic and industrial problems. In FY-92, they worked on projects in all of the areas outlined above. The object of their work on numerical electromagnetic algorithms continues to be the improvement of time-domain algorithms for electromagnetic simulation on unstructured conforming grids. The thrust area is also investigating various technologies for conforming-grid mesh generation to simplify the application of their advanced field solvers to design problems involving complicated geometries. They are developing a major code suite based on the three-dimensional (3-D), conforming-grid, time-domain code DSI3D. They continue to maintain and distribute the 3-D, finite-difference time-domain (FDTD) code TSAR, which is installed at several dozen university, government, and industry sites.
Quantum entanglement purification in cavities
Romero, J L; Saavedra, C; Retamal, J C
2002-01-01
A physical implementation of an entanglement purification protocol is studied using a cavity quantum electrodynamic based proposal, where, the quantum information is stored in quantum field sates inside cavities. Also a procedure is given for quantifying the degree of entanglement between quantum fields. (Author)
Quench studies of ILC cavities
Eremeev, Grigory; Geng, Rongli; Palczewski, Ari; Dai, Jin
2011-07-01
Quench limits accelerating gradient in SRF cavities to a gradient lower than theoretically expected for superconducting niobium. Identification of the quenching site with thermometry and OST, optical inspection, and replica of the culprit is an ongoing effort at Jefferson Lab aimed at better understanding of this limiting phenomenon. In this contribution we present our finding with several SRF cavities that were limited by quench.
Superconducting cavity model for LEP
1979-01-01
A superconducting cavity model is being prepared for testing in a vertical cryostat.At the top of the assembly jig is H.Preis while A.Scharding adjusts some diagnostic equipment to the cavity. See also photo 7912501X.
1991-01-01
One of the copper radio-frequency accelerating cavities installed for the first phase of LEP (1989-1995). Bunches of electrons and positrons circulated in LEP in opposite directions and were accelerated in eight different sets of 16 cavities (situated on either side of the four experiments), gaining 400 million volts of accelerating power per turn.
Single and Coupled Nanobeam Cavities
Ivinskaya, Aliaksandra; Lavrinenko, Andrei; Shyroki, Dzmitry M.
2013-01-01
for analysis and design of photonic crystal devices, such as 2D ring resonators for filters, single and coupled nanobeam cavities, birefringence in photonic crystal cavities, threshold analysis in photonic crystal lasers, gap solitons in photonic crystals, novel photonic atolls, dynamic characteristics...
Single atoms on demand for cavity QED experiments
Dotsenko, I.
2007-09-06
Cavity quantum electrodynamics (cavity QED) describes electromagnetic fields in a confined space and the radiative properties of atoms in such fields. The simplest example of such system is a single atom interacting with one mode of a high-finesse resonator. Besides observation and exploration of fundamental quantum mechanical effects, this system bears a high potential for applications quantum information science such as, e.g., quantum logic gates, quantum communication and quantum teleportation. In this thesis I present an experiment on the deterministic coupling of a single neutral atom to the mode of a high-finesse optical resonator. In Chapter 1 I describe our basic techniques for trapping and observing single cesium atoms. As a source of single atoms we use a high-gradient magneto-optical trap, which captures the atoms from background gas in a vacuum chamber and cools them down to millikelvin temperatures. The atoms are then transferred without loss into a standing-wave dipole trap, which provides a conservative potential required for experiments on atomic coherence such as quantum information processing and metrology on trapped atoms. Moreover, shifting the standing-wave pattern allows us to deterministically transport the atoms (Chapter 2). In combination with nondestructive fluorescence imaging of individual trapped atoms, this enables us to control their position with submicrometer precision over several millimeters along the dipole trap. The cavity QED system can distinctly display quantum behaviour in the so-called strong coupling regime, i.e., when the coherent atom-cavity coupling rate dominates dissipation in the system. This sets the main requirements on the resonator's properties: small mode volume and high finesse. Chapter 3 is devoted to the manufacturing, assembling, and testing of an ultra-high finesse optical Fabry-Perot resonator, stabilized to the atomic transition. In Chapter 4 I present the transportation of single atoms into the
Mechanical Properties of Niobium Cavities
Ciovati, Gianluigi [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Dhakal, Pashupati [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Matalevich, Joseph R. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Myneni, Ganapati Rao [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States)
2015-09-01
The mechanical stability of bulk Nb cavity is an important aspect to be considered in relation to cavity material, geometry and treatments. Mechanical properties of Nb are typically obtained from uniaxial tensile tests of small samples. In this contribution we report the results of measurements of the resonant frequency and local strain along the contour of single-cell cavities made of ingot and fine-grain Nb of different purity subjected to increasing uniform differential pressure, up to 6 atm. Measurements have been done on cavities subjected to different heat treatments. Good agreement between finite element analysis simulations and experimental data in the elastic regime was obtained with a single set of values of Young’s modulus and Poisson’s ratio. The experimental results indicate that the yield strength of medium-purity ingot Nb cavities is higher than that of fine-grain, high-purity Nb.
Present situation of underground cavity exploration. Romenka kudo tansa no genjo
Cho, K.; Koike, K. (Ministry of Construction, Tokyo (Japan))
1994-03-25
Due to many sinking accidents occurring in urban roads, a high-performance exploration vehicle was developed about three years ago and has been used to perform field investigations. The present report describes the outline covering the progress in its development and the results of cavity investigations. While electromagnetic waves, sound waves, vibrational waves, infrared rays have been used for non-destructive exploration of underground cavities, the present method adopts the electromagnetic underground radar system which observes the reflecting conditions of pulse electromagnetic waves radiated from an antenna to the underground at boundaries of layers different in dielectric factor. This device loaded on a reformed bus of medium-size has power of exploration depth of 1.2m, exploration width of 2m, and maximum exploration speed of 20km/h. According to the investigations on a total of 1600km since 1990, 175 cavities which include those reaching 15m[sup 2] in area and 2.3m in depth have been detected. The results of excavation immediately following detection showed a lot of information also on the causes of cavity generation. 7 figs., 1 tab.
Childhood Leukemia and Electromagnetic Fields
Alpaslan Türkkan
2009-12-01
Full Text Available In this review, the relationship between very low frequency electromagnetic fields, originating from high voltage powerlines, and childhood leukemia was evaluated. Electromagnetic fields have biological effects. Whole populations are effected by different levels of electromagnetic fields but children are more sensible. In urban areas high voltage powerlines are the main sources of electromagnetic fields. The relation of electromagnetic fields due to high voltage powerlines and leukemia with consideration of dose-response and distance is investigated in several studies. There are different opinions on the effects of electromagnetic fields on general health. The relation between electromagnetic fields and childhood leukemia must be considered separately. Although there is no limit value, it is generally accepted that exposure to 0.4 µT and over doubles the risk of leukemia in children 15 years and younger. (Journal of Current Pediatrics 2009; 7: 137-41
Spoof polariton enhanced modal density of states in planar nanostructured metallic cavities
Davids, P S; Dalvit, D A R
2014-01-01
Spoof surface modes on nanostructured metallic surfaces are known to have tailorable dispersion dependent on the geometric characteristics of the periodic pattern. Here we examine the spoof plasmon dispersion on an isolated grating and a grating-planar mirror cavity configuration. The spoof polariton dispersion in the cavity is obtained using the scattering matrix approach, and the related differential modal density of states is introduced to obtain the mode dispersion and classify the cavity polariton modes. The grating-mirror cavity geometry is an example of periodically nanostructured metals above a planar ground plane. The properties discussed here are relevant for applications ranging from thin electromagnetic perfect absorbers to near-field radiative heat transfer.
Entanglement of resonantly coupled field modes in cavities with vibrating boundaries
Andreata, M A; Dodonov, V V
2002-01-01
We study time dependence of various measures of entanglement (covariance entanglement coefficient, purity entanglement coefficient, normalized distance coefficient, entropic coefficients) between resonantly coupled modes of the electromagnetic field in ideal cavities with oscillating boundaries. Two types of cavities are considered: a three-dimensional cavity possessing eigenfrequencies $\\omega_3=3\\omega_1$, whose wall oscillates at the frequency $\\omega_w=2\\omega_1$, and a one-dimensional (Fabry--Perot) cavity with an equidistant spectrum $\\omega_n= n\\omega_1$, when the distance between perfect mirrors oscillates at the frequencies $\\omega_1$ and $2\\omega_1$. The behaviour of entanglement measures in these cases turns out to be completely different, although all three coefficients demonstrate qualitatively similar time dependences in each case (except for some specific situations, where the covariance entanglement coefficient, based on traces of covariance submatrices, seems to be essentially more sensitive ...
ELECTROMAGNETIC RELEASE MECHANISM
Michelson, C.
1960-09-13
An electromagnetic release mechanism is offered that may be used, for example, for supporting a safety rod for a nuclear reactor. The release mechanism is designed to have a large excess holding force and a rapid, uniform, and dependable release. The fast release is accomplished by providing the electromagnet with slotttd polts separated by an insulating potting resin, and by constructing the poles with a ferro-nickel alloy. The combination of these two features materially reduces the eddy current power density whenever the magnetic field changes during a release operation. In addition to these features, the design of the armature is such as to provide ready entrance of fluid into any void that might tend to form during release of the armature. This also improves the release time for the mechanism. The large holding force for the mechanism is accomplished by providing a small, selected, uniform air gap between the inner pole piece and the armature.
Classical Electromagnetic Theory
VanderLinde, Jack
2004-01-01
This book is a self contained course in electromagnetic theory suitable for senior physics and electrical engineering students as well as graduate students whose past has not prepared them well for books such as Jackson or Landau and Lifschitz. The text is liberally sprinkled with worked examples illustrating the application of the theory to various physical problems. In this new edition I have endeavored to improve the accuracy and readability, added and further clarified examples, added sections on Schwarz-Christoffel mappings, and to make the book more self sufficient added an appendix on orthogonal function expansions and added the derivation of Bessel functions and Legendre polynomials as well as derivation of their generating functions. The number of student exercises has been increased by 45 over the previous edition. This book stresses the unity of electromagnetic theory with electric and magnetic fields developed in parallel. SI units are used throughout and considerable use is made of tensor notatio...
Electromagnetic fields and waves
Iskander, Magdy F
2013-01-01
The latest edition of Electromagnetic Fields and Waves retains an authoritative, balanced approach, in-depth coverage, extensive analysis, and use of computational techniques to provide a complete understanding of electromagnetic—important to all electrical engineering students. An essential feature of this innovative text is the early introduction of Maxwell's equations, together with the quantifying experimental observations made by the pioneers who discovered electromagnetics. This approach directly links the mathematical relations in Maxwell's equations to real experiments and facilitates a fundamental understanding of wave propagation and use in modern practical applications, especially in today's wireless world. New and expanded topics include the conceptual relationship between Coulomb's law and Gauss's law for calculating electric fields, the relationship between Biot-Savart's and Ampere's laws and their use in calculating magnetic fields from current sources, the development of Faraday's law from e...
The KLOE electromagnetic calorimeter
Adinolfi, M.; Ambrosino, F.; Antonelli, A.; Antonelli, M.; Anulli, F.; Barbiellini, G.; Bencivenni, G.; Bertolucci, S.; Bini, C. E-mail: cesare.bini@roma1.infn.it; Bloise, C.; Bocci, V.; Bossi, F.; Branchini, P.; Cabibbo, G.; Caloi, R.; Campana, P.; Casarsa, M.; Cataldi, G.; Ceradini, F.; Cervelli, F.; Ciambrone, P.; De Lucia, E.; De Simone, P.; De Zorzi, G.; Dell' Agnello, S.; Denig, A.; Di Domenico, A.; Di Donato, C.; Di Falco, S.; Doria, A.; Erriquez, O.; Farilla, A.; Ferrari, A.; Ferrer, M.L.; Finocchiaro, G.; Forti, C.; Franceschi, A.; Franzini, P.; Gao, M.L.; Gatti, C.; Gauzzi, P.; Giannasi, A.; Giovannella, S.; Graziani, E.; Han, H.G.; Han, S.W.; Huang, X.; Incagli, M.; Ingrosso, L.; Keeble, L.; Kim, W.; Kuo, C.; Lanfranchi, G.; Lee-Franzini, J.; Lomtadze, T.; Mao, C.S.; Martemianov, M.; Mei, W.; Messi, R.; Miscetti, S.; Moccia, S.; Moulson, M.; Mueller, S.; Murtas, F.; Pacciani, L.; Palomba, M.; Palutan, M.; Pasqualucci, E.; Passalacqua, L.; Passeri, A.; Picca, D.; Pirozzi, G.; Pontecorvo, L.; Primavera, M.; Santangelo, P.; Santovetti, E.; Saracino, G.; Schamberger, R.D.; Sciascia, B.; Scuri, F.; Sfiligoi, I.; Silano, P.; Spadaro, T.; Spiriti, E.; Tortora, L.; Valente, P.; Valeriani, B.; Venanzoni, G.; Ventura, A.; Woelfle, S.; Wu, Y.; Xie, Y.G.; Zema, P.F.; Zhang, C.D.; Zhang, J.Q.; Zhao, P.P
2002-04-11
The KLOE detector was designed primarily for the study of CP violation in neutral kaon decays at DAPHINE, the Frascati phi-factory. The detector consists of a tracker and an electromagnetic calorimeter. A lead-scintillating-fiber sampling calorimeter satisfies best the requirements of the experiment, providing adequate energy resolution and superior timing accuracy. We describe in the following the construction of the calorimeter, its calibration and how the calorimeter information is used to obtain energy, point of entry and time of the arrival of photons, electrons and charged particles. With e{sup +}e{sup -} collision data at DAPHINE for an integrated luminosity of some 2 pb{sup -1} we find for electromagnetic showers, an energy resolution of 5.7%/{radical}E(GeV) and a time resolution of 54/{radical}E(GeV) ps. We also present a measurement of efficiency for low energy photons.
Electromagnetic acoustic imaging.
Emerson, Jane F; Chang, David B; McNaughton, Stuart; Jeong, Jong Seob; Shung, K K; Cerwin, Stephen A
2013-02-01
Electromagnetic acoustic imaging (EMAI) is a new imaging technique that uses long-wavelength RF electromagnetic (EM) waves to induce ultrasound emission. Signal intensity and image contrast have been found to depend on spatially varying electrical conductivity of the medium in addition to conventional acoustic properties. The resultant conductivity- weighted ultrasound data may enhance the diagnostic performance of medical ultrasound in cancer and cardiovascular applications because of the known changes in conductivity of malignancy and blood-filled spaces. EMAI has a potential advantage over other related imaging techniques because it combines the high resolution associated with ultrasound detection with the generation of the ultrasound signals directly related to physiologically important electrical properties of the tissues. Here, we report the theoretical development of EMAI, implementation of a dual-mode EMAI/ultrasound apparatus, and successful demonstrations of EMAI in various phantoms designed to establish feasibility of the approach for eventual medical applications.
Electromagnetic wave energy converter
Bailey, R. L. (Inventor)
1973-01-01
Electromagnetic wave energy is converted into electric power with an array of mutually insulated electromagnetic wave absorber elements each responsive to an electric field component of the wave as it impinges thereon. Each element includes a portion tapered in the direction of wave propagation to provide a relatively wideband response spectrum. Each element includes an output for deriving a voltage replica of the electric field variations intercepted by it. Adjacent elements are positioned relative to each other so that an electric field subsists between adjacent elements in response to the impinging wave. The electric field results in a voltage difference between adjacent elements that is fed to a rectifier to derive dc output power.
The KLOE electromagnetic calorimeter
Adinolfi, M; Antonelli, A; Antonelli, M; Anulli, F; Barbiellini, G; Bencivenni, G; Bertolucci, Sergio; Bini, C; Bloise, C; Bocci, V; Bossi, F; Branchini, P; Cabibbo, G; Caloi, R; Campana, P; Casarsa, M; Cataldi, G; Ceradini, F; Cervelli, F; Ciambrone, P; De Lucia, E; De Simone, P; De Zorzi, G; Dell'Agnello, S; Denig, A; Di Domenico, A; Di Donato, C; Di Falco, S; Doria, A; Erriquez, O; Farilla, A; Ferrari, A; Ferrer, M L; Finocchiaro, G; Forti, C; Franceschi, A; Franzini, P; Gao, M L; Gatti, C; Gauzzi, P; Giannasi, A; Giovannella, S; Graziani, E; Han, H G; Han, S W; Huang, X; Incagli, M; Ingrosso, L; Keeble, L; Kim, W; Kuo, C; Lanfranchi, G; Lee-Franzini, J; Lomtadze, T A; Mao Chen Sheng; Martemyanov, M; Mei, W; Messi, R; Miscetti, S; Moccia, S; Moulson, M; Murtas, F; Müller, S; Pacciani, L; Palomba, M; Palutan, M; Pasqualucci, E; Passalacqua, L; Passeri, A; Picca, D; Pirozzi, G; Pontecorvo, L; Primavera, M; Santangelo, P; Santovetti, E; Saracino, G; Schamberger, R D; Sciascia, B; Scuri, F; Sfiligoi, I; Silano, P; Spadaro, T; Spiriti, E; Tortora, L; Valente, P; Valeriani, B; Venanzoni, G; Ventura, A; Wu, Y; Wölfle, S; Xie, Y G; Zema, P F; Zhang, C D; Zhang, J Q; Zhao, P P
2002-01-01
The KLOE detector was designed primarily for the study of CP violation in neutral kaon decays at DAPHINE, the Frascati phi-factory. The detector consists of a tracker and an electromagnetic calorimeter. A lead-scintillating-fiber sampling calorimeter satisfies best the requirements of the experiment, providing adequate energy resolution and superior timing accuracy. We describe in the following the construction of the calorimeter, its calibration and how the calorimeter information is used to obtain energy, point of entry and time of the arrival of photons, electrons and charged particles. With e sup + e sup - collision data at DAPHINE for an integrated luminosity of some 2 pb sup - sup 1 we find for electromagnetic showers, an energy resolution of 5.7%/sq root E(GeV) and a time resolution of 54/sq root E(GeV) ps. We also present a measurement of efficiency for low energy photons.
Chen, Haixia; Zhang, Yiqi; Yao, Xin; Wu, Zhenkun; Zhang, Xun; Zhang, Yanpeng; Xiao, Min
2014-01-01
We report experimental studies of bright-state polaritons of four-wave mixing (FWM) and six-wave mixing (SWM) signals through cascade nonlinear optical parametric amplification processes in an atom-cavity composite system for the first time. Also, the coexisting cavity transmission modes of parametrically amplified FWM and SWM signals are observed. Finally, electromagnetically induced absorption by the FWM cavity modes in the probe beam is investigated. The investigations can find potential applications in multi-channel narrow-band long-distance quantum communication. PMID:24401795
Bakhvalov, N.S.; Zhidkov, E.P.; Kadantseva, E.P.; Rubin, S.B.; Serdyukova, S.I.
1982-01-01
Results of numerical calculation by the finite-differential method of self-consistent problem of the motion of dense electron bunch in inhomogeneous cavity is discussed. The pulsed strange wave with finite storage of energy, excited secondary and induced potential fields affects the bunch. Two problems are considered: in the first case bunch flies into the cavity, in the second one at the initial moment the bunch rests in the center of cavity. The energy balance in the dynamic system, bunch plus total electromagnetic field, is considered.
Gravitation and electromagnetism
Sidharth, B.G. [Birla Science Centre, Adarsh Nagar, Hyderabad (India)
2001-06-01
The realms of gravitation, belonging to classical physics, and of electromagnetism, belonging to the theory of the electron and quantum mechanics have remained apart as two separate pillars, in spite of a century of effort by physicists to reconcile them. In this paper it is argued that if ideas of classical spacetime have been extended to include in addition to non-integrability non-commutavity also, then such a reconciliation is possible.
Fractional Electromagnetic Waves
Gómez, J F; Bernal, J J; Tkach, V I; Guía, M
2011-01-01
In the present work we consider the electromagnetic wave equation in terms of the fractional derivative of the Caputo type. The order of the derivative being considered is 0 <\\gamma<1. A new parameter \\sigma, is introduced which characterizes the existence of the fractional components in the system. We analyze the fractional derivative with respect to time and space, for \\gamma = 1 and \\gamma = 1/2 cases.
The KLOE electromagnetic calorimeter
Adinolfi, M.; Ambrosino, F.; Antonelli, A.; Antonelli, M.; Anulli, F.; Barbiellini, G.; Bencivenni, G.; Bertolucci, S.; Bini, C.; Bloise, C.; Bocci, V.; Bossi, F.; Branchini, P.; Cabibbo, G.; Caloi, R.; Campana, P.; Casarsa, M.; Cataldi, G.; Ceradini, F.; Cervelli, F.; Ciambrone, P.; De Lucia, E.; De Simone, P.; De Zorzi, G.; Dell' Agnello, S.; Denig, A.; Di Domenico, A.; Di Donato, C.; Di Falco, S.; Doria, A.; Erriquez, O.; Farilla, A.; Ferrari, A.; Ferrer, M.L.; Finocchiaro, G.; Forti, C.; Franceschi, A.; Franzini, P.; Gao, M.L.; Gatti, C.; Gauzzi, P.; Giannasi, A.; Giovannella, S.; Graziani, E.; Han, H.G.; Han, S.W.; Huang, X.; Incagli, M.; Ingrosso, L.; Keeble, L.; Kim, W.; Kuo, C.; Lanfranchi, G. E-mail: gaia.lanfranchi@lnf.infn.it; Lee-Franzini, J.; Lomtadze, T.; Mao, C.S.; Martemianov, M.; Mei, W.; Messi, R.; Miscetti, S.; Moccia, S.; Moulson, M.; Mueller, S.; Murtas, F.; Pacciani, L.; Palomba, M.; Palutan, M.; Pasqualucci, E.; Passalacqua, L.; Passeri, A.; Picca, D.; Pirozzi, G.; Pontecorvo, L.; Primavera, M.; Santangelo, P.; Santovetti, E.; Saracino, G.; Schamberger, R.D.; Sciascia, B.; Scuri, F.; Sfiligoi, I.; Silano, P.; Spadaro, T.; Spiriti, E.; Tortora, L.; Valente, P.; Valeriani, B.; Venanzoni, G.; Ventura, A.; Woelfle, S.; Wu, Y.; Xie, Y.G.; Zema, P.F.; Zhang, C.D.; Zhang, J.Q.; Zhao, P.P
2002-11-21
The KLOE calorimeter is a fine lead-scintillating fiber sampling calorimeter. We describe in the following the calibration procedures and the calorimeter performances obtained after 3 years of data taking. We get an energy resolution for electromagnetic showers of 5.4%/{radical}E(GeV) and a time resolution of 56 ps/{radical}E(GeV). We also present a measurement of efficiency for low-energy photons.
Dynamic electromagnetic metamaterials
Fan, Kebin; Padilla, Willie J.
2015-01-01
Electromagnetic metamaterials are designer materials made from ‘artificial atoms’ which provide unprecedented control over light matter interactions. Metamaterials are fashioned to yield a specific response to the electric and magnetic components of light and have realized a multitude of exotic properties difficult to achieve with natural materials. Having matured over the last decade and a half, researchers now look toward realizing applications of metamaterials. The ability to dynamically c...
Electromagnetism and interconnections
Charruau, S
2009-01-01
This book covers the theoretical problems of modeling electrical behavior of the interconnections encountered in everyday electronic products. The coverage shows the theoretical tools of waveform prediction at work in the design of a complex and high-speed digital electronic system. Scientists, research engineers, and postgraduate students interested in electromagnetism, microwave theory, electrical engineering, or the development of simulation tools software for high speed electronic system design automation will find this book an illuminating resource.
Introduction to electromagnetic theory
Owen, George E
2003-01-01
A direct, stimulating approach to electromagnetic theory, this text employs matrices and matrix methods for the simple development of broad theorems. The author uses vector representation throughout the book, with numerous applications of Poisson's equation and the Laplace equation (the latter occurring in both electronics and magnetic media). Contents include the electrostatics of point charges, distributions of charge, conductors and dielectrics, currents and circuits, and the Lorentz force and the magnetic field. Additional topics comprise the magnetic field of steady currents, induced ele
Belle electromagnetic calorimeter
Miyabayashi, K
2002-01-01
We report the performance of the Belle electromagnetic calorimeter for the first three years operation. Good mass resolutions for pi sup 0 and eta are obtained to be 4.8 and 12.1 MeV/c sup 2 , respectively. The degradation of light output due to the radiation damage is small, about 3% for the radiation dose of 40 rad. These performances promise further study of B physics with neutral particle reconstruction.
Making electromagnetic wavelets
Kaiser, Gerald [Center for Signals and Waves, 3803 Tonkawa Trail no. 2, Austin, TX 78756-3915 (United States)
2004-06-04
Electromagnetic wavelets are constructed using scalar wavelets as superpotentials, together with an appropriate polarization. It is shown that oblate spheroidal antennas, which are ideal for their production and reception, can be made by deforming and merging two branch cuts. This determines a unique field on the interior of the spheroid which gives the boundary conditions for the surface charge-current density necessary to radiate the wavelets. These sources are computed, including the impulse response of the antenna.
Composite resonator vertical cavity laser diode
Choquette, K.D.; Hou, H.Q.; Chow, W.W.; Geib, K.M.; Hammons, B.E.
1998-05-01
The use of two coupled laser cavities has been employed in edge emitting semiconductor lasers for mode suppression and frequency stabilization. The incorporation of coupled resonators within a vertical cavity laser opens up new possibilities due to the unique ability to tailor the interaction between the cavities. Composite resonators can be utilized to control spectral and temporal properties within the laser; previous studies of coupled cavity vertical cavity lasers have employed photopumped structures. The authors report the first composite resonator vertical cavity laser diode consisting of two optical cavities and three monolithic distributed Bragg reflectors. Cavity coupling effects and two techniques for external modulation of the laser are described.
Electromagnetic force on a brane
Li, Li-Xin
2016-11-01
A fundamental assumption in the theory of brane world is that all matter and radiation are confined on the four-dimensional brane and only gravitons can propagate in the five-dimensional bulk spacetime. The brane world theory did not provide an explanation for the existence of electromagnetic fields and the origin of the electromagnetic field equation. In this paper, we propose a model for explaining the existence of electromagnetic fields on a brane and deriving the electromagnetic field equation. Similar to the case in Kaluza–Klein theory, we find that electromagnetic fields and the electromagnetic field equation can be derived from the five-dimensional Einstein field equation. However, the derived electromagnetic field equation differs from the Maxwell equation by containing a term with the electromagnetic potential vector coupled to the spacetime curvature tensor. So it can be considered as generalization of the Maxwell equation in a curved spacetime. The gravitational field equation on the brane is also derived with the stress–energy tensor for electromagnetic fields explicitly included and the Weyl tensor term explicitly expressed with matter fields and their derivatives in the direction of the extra-dimension. The model proposed in the paper can be regarded as unification of electromagnetic and gravitational interactions in the framework of brane world theory.
Coherent hybrid electromagnetic field imaging
Cooke, Bradly J.; Guenther, David C.
2008-08-26
An apparatus and corresponding method for coherent hybrid electromagnetic field imaging of a target, where an energy source is used to generate a propagating electromagnetic beam, an electromagnetic beam splitting means to split the beam into two or more coherently matched beams of about equal amplitude, and where the spatial and temporal self-coherence between each two or more coherently matched beams is preserved. Two or more differential modulation means are employed to modulate each two or more coherently matched beams with a time-varying polarization, frequency, phase, and amplitude signal. An electromagnetic beam combining means is used to coherently combine said two or more coherently matched beams into a coherent electromagnetic beam. One or more electromagnetic beam controlling means are used for collimating, guiding, or focusing the coherent electromagnetic beam. One or more apertures are used for transmitting and receiving the coherent electromagnetic beam to and from the target. A receiver is used that is capable of square-law detection of the coherent electromagnetic beam. A waveform generator is used that is capable of generation and control of time-varying polarization, frequency, phase, or amplitude modulation waveforms and sequences. A means of synchronizing time varying waveform is used between the energy source and the receiver. Finally, a means of displaying the images created by the interaction of the coherent electromagnetic beam with target is employed.
THEORY OF ELECTROMAGNETIC DRIVE WITH ELEMENTARY PARTICLES CURRENT AND VACUUM POLARIZATION
Trunev A. P.
2016-01-01
Full Text Available The article discusses a model of rocket motor of electromagnetic type, consisting of a source of electromagnetic radio frequency oscillations and the conical cavity, in which electromagnetic waves are excited. We have created a multi-dimensional transient numerical model describing the process of establishing electromagnetic oscillations in the resonator, taking into account the finite conductivity of the walls. Separately, the standing waves in the cavity with conducting walls have been simulated. It is shown that the oscillations mode in the conducting resonator different from that in an ideal resonator, both in a case of steady and unsteady waves. We have built a dynamic model taking into account the thermal conductivity and electrical conductivity of the walls, waves and particles emission and vacuum polarization. We have also developed a dynamic model enables to optimize a thrust force on a considerable number of parameters without the involvement of the hypotheses about the physics of the phenomenon. We run the optimization of the operating parameters of the device, namely by the excitation frequency, the frequency of the modulating signal, the magnitude of heat losses of electromagnetic energy by thermal radiation in the IR spectrum, the parameters of forced heat transfer and the temperature dependence of the resistance of the material of the cavity walls. It is found that the pulse modulation greatly improves the efficiency of conversion of electromagnetic energy into thrust. The mechanism of formation of traction, adjusting the metrics of space-time, the current contribution of elementary particles, the Yang-Mills and electromagnetic fields is proposed. It is shown that the contribution of the elementary particles in the thrust force is proportional to the electrical conductivity of the system multiplied by Abraham force
Stacked optical antennas for plasmon propagation in a 5 nm-confined cavity
Saeed, A.
2015-06-09
The sub-wavelength concentration and propagation of electromagnetic energy are two complementary aspects of plasmonics that are not necessarily co-present in a single nanosystem. Here we exploit the strong nanofocusing properties of stacked optical antennas in order to highly concentrate the electromagnetic energy into a 5nm metal-insulator-metal (MIM) cavity and convert free radiation into guided modes. The proposed nano-architecture combines the concentration properties of optical nanoantennas with the propagation capability of MIM systems, paving the way to highly miniaturized on-chip plasmonic waveguiding. © 2015, Nature Publishing Group. All rights reserved.
Stacked optical antennas for plasmon propagation in a 5 nm-confined cavity.
Saeed, A; Panaro, S; Zaccaria, R Proietti; Raja, W; Liberale, C; Dipalo, M; Messina, G C; Wang, H; De Angelis, F; Toma, A
2015-06-09
The sub-wavelength concentration and propagation of electromagnetic energy are two complementary aspects of plasmonics that are not necessarily co-present in a single nanosystem. Here we exploit the strong nanofocusing properties of stacked optical antennas in order to highly concentrate the electromagnetic energy into a 5 nm metal-insulator-metal (MIM) cavity and convert free radiation into guided modes. The proposed nano-architecture combines the concentration properties of optical nanoantennas with the propagation capability of MIM systems, paving the way to highly miniaturized on-chip plasmonic waveguiding.
The cavity resonator design: stochastic optimization of the transmission line method
Jurečka, Stanislav; Müllerová, Jarmila; Dado, Milan
2012-02-01
Stable cavity resonators provide an ideal solution for high quality applications in telecommunications, laser sources, sensors, oscillators and filters, instrumentation and other large area of applications. For the determination of the electromagnetic field (EMF) properties in a cavity resonator several numerical methods are widely used. In our approach we used the transmission line modeling method (TLM). It is a wide-band time-domain numerical method suitable for solution of the electromagnetic field in a studied region. TLM method is based on the isomorphism between the theory of passive electrical network and the wave equation describing the properties of the EMF. TLM method offers two important advantages over the time-domain techniques such as the finite-difference time domain methods. The electric and magnetic field are resolved synchronously in time and space and TLM in implicitly stable method due to the mapping to electrical circuits. The EMF in the rectangular cavity is in our approach determined by the TLM method and the frequency spectrum is computed by the Fourier transform of the time signal. The theoretical model of the cavity EMF power spectral density function contains information about the geometrical configuration of the resonator. In our work we use the genetic algorithm for the determination of optimal dimensions of the cavity resonator expected for the proposed output resonant frequency. The stochastic modification of the theoretical model parameters is controlled by the genetic operators of mutation, crossover and selection, leading to overall improvement of the theoretical model estimation during the optimization process.
Development of the RF cavity for the SKKUCY-9 compact cyclotron
Shin, Seungwook; Lee, Jongchul [Department of Energy Science, Sungkyunkwan University, 2066, Seobu-Ro, Jangan-Gu, Suwon-si, Gyeonggi-do (Korea, Republic of); LEE, Byeong-No [Radiation Equipment Research Division, Korea Atomic Energy Research Institute, 111, Daedeok-daero 989 Beon-gil, Yuseong-gu, Daejeon (Korea, Republic of); Ha, Donghyup; Namgoong, Ho [College of Information & Communication Engineering, Sungkyunkwan University, 2066, Seobu-Ro, Jangan-Gu, Suwon-si, Gyeonggi-do (Korea, Republic of); Chai, Jongseo, E-mail: jschai@skku.edu [College of Information & Communication Engineering, Sungkyunkwan University, 2066, Seobu-Ro, Jangan-Gu, Suwon-si, Gyeonggi-do (Korea, Republic of)
2015-09-21
A 9 MeV compact cyclotron, named SKKUCY-9, for a radiopharmaceutical compound especially fludeoxyglucose (FDG) production for a positron emission tomography (PET) machine was developed at Sungkyunkwan University. H{sup −} ions which are produced from a Penning Ionization Gauge(PIG) ion source, travel through a normal conducting radio frequency (RF) cavity which operates at 83.2 MHz for an acceleration and electro-magnet for a beam focusing until the ions acquire energy of about 9 MeV. For installation at a small local hospital, our SKKUCY-9 cyclotron is developed to be compact and light-weight, comparable to conventional medical purpose cyclotrons. For compactness, we adapted a deep valley and large angle hill type for the electro-magnet design. Normally a RF cavity is installed inside of the empty space of the magnet valley region, which is extremely small in our case. We faced problems such as difficulties of installing the RF cavity, low Q-value. Despite of those difficulties, a compact RF cavity and its system including a RF power coupler to feed amplified RF power to the RF cavity and a fine tuner to compensate RF frequency variations was successfully developed and tested.
Sublet, A; Calatroni, S; D'Elia, A; Jecklin, N; Mondino, I; Prunet, S; Therasse, M; Venturini Delsolaro, W; Zhang, P
2013-01-01
In the context of the HIE-ISOLDE upgrade at CERN, several new facilities for the niobium sputter coating of QWR-type superconducting RF accelerating cavities have been developed, built, and successfully operated. In order to further optimize the production process of these cavities the magnetron sputtering technique has been further investigated and continued as an alternative to the already successfully operational DC bias diode sputtering method. The purpose of this poster is to present the results obtained with this technique. The Nb thickness profile along the cavity and its correlation with the electro-magnetic field distribution inside the cavity are discussed. Film structure, morphology and Residual Resistivity Ratio (RRR) will be considered as well and compared with films obtained by DC bias diode sputtering. Finally these results will be compared with RF measurement of a production-like magnetron-coated cavity.
Strong Coupling of the Cyclotron Motion of Surface Electrons on Liquid Helium to a Microwave Cavity
Abdurakhimov, L. V.; Yamashiro, R.; Badrutdinov, A. O.; Konstantinov, D.
2016-07-01
The strong coupling regime is observed in a system of two-dimensional electrons whose cyclotron motion is coupled to an electromagnetic mode in a Fabry-Perot cavity resonator. Rabi splitting of eigenfrequencies of the coupled motion is observed both in the cavity reflection spectrum and ac current of the electrons, the latter probed by measuring their bolometric photoresponse. Despite the fact that similar observations of Rabi splitting in many-particle systems have been described as a quantum-mechanical effect, we show that the observed splitting can be explained completely by a model based on classical electrodynamics.
Frougier, J., E-mail: julien.frougier@thalesgroup.com; Jaffrès, H.; Deranlot, C.; George, J.-M. [Unité Mixte de Physique CNRS-Thales and Université Paris Sud 11, 1 av. Fresnel, 91767 Palaiseau (France); Baili, G.; Dolfi, D. [Thales Research and Technology, 1 av. Fresnel, 91767 Palaiseau (France); Alouini, M. [Institut de Physique de Rennes, 263 Avenue Général Leclerc, 35042 Rennes (France); Sagnes, I. [Laboratoire de Photonique et de Nanostructures, Route de Nozay, 91460 Marcoussis (France); Garnache, A. [Institut d' électronique du Sud CNRS UMR5214, Université Montpellier 2 Place Eugene Bataillon, 34095 Montpellier (France)
2013-12-16
We fabricated and characterized an optically pumped (100)-oriented InGaAs/GaAsP multiple quantum well Vertical External Cavity Surface Emitting Laser (VECSEL). The structure is designed to allow the integration of a Metal-Tunnel-Junction ferromagnetic spin-injector for future electrical injection. We report here the control at room temperature of the electromagnetic field polarization using optical spin injection in the active medium of the VECSEL. The switching between two highly circular polarization states had been demonstrated using an M-shaped extended cavity in multi-modes lasing. This result witnesses an efficient spin-injection in the active medium of the LASER.
Proposed realization of the Dicke-model quantum phase transition in an optical cavity QED system
Dimer, F; Estienne, B; Parkins, A S
2006-01-01
The Dicke model consisting of an ensemble of two-state atoms interacting with a single quantized mode of the electromagnetic field exhibits a zero-temperature phase transition at a critical value of the dipole coupling strength. We propose a scheme based on multilevel atoms and cavity-mediated Raman transitions to realise an effective Dicke system operating in the phase transition regime. Output light from the cavity carries signatures of the critical behavior which is analyzed for the thermodynamic limit where the number of atoms is very large.
Design of Chaotic Cavities with Curved Wave Diffractors for Enhanced Low-Frequency Operation
Arnaut, L R
2014-01-01
Some numerical calculations are presented on the dependence of the average mode count and average mode density of electromagnetic cavities on their specific geometric design, based on the generalized Weyl law. The analysis focuses on a chaotic quasi-cubic cavity furnished with curved wave diffractors placed on its interior surface. The focus is on a design that increases the mode density and Q at relatively low frequencies. The results are of interest in reducing the `lowest usable frequency' and increasing the maximum field strength inside mode-stirred reverberation chambers.
Gassot, H
2007-07-01
Mono-spoke superconducting cavities have been proposed for the acceleration of radioactive ion beams. The interaction of the electromagnetic field with the surface electrical current generates Lorentz forces that operate on the intern wall of the cavity, the distribution of these forces is highly non-linear and varying. The stability of a superconducting cavity is directly linked to the frequency variation due to Lorentz forces and as a consequence the optimized design of a cavity must take into account these forces. In order to optimize the design of a cavity, 3 complementary software have been developed: Catia, a computer-aided-design software, Soprano for electromagnetic modeling and Cast3m for mechanical modeling. Preliminary results show a good agreement between predicted values and experimental data. (A.C.)
Output field-quadrature measurements and squeezing in ultrastrong cavity-QED
Stassi, Roberto; Savasta, Salvatore; Garziano, Luigi; Spagnolo, Bernardo; Nori, Franco
2016-12-01
We study the squeezing of output quadratures of an electro-magnetic field escaping from a resonator coupled to a general quantum system with arbitrary interaction strengths. The generalized theoretical analysis of output squeezing proposed here is valid for all the interaction regimes of cavity-quantum electrodynamics: from the weak to the strong, ultrastrong, and deep coupling regimes. For coupling rates comparable or larger then the cavity resonance frequency, the standard input-output theory for optical cavities fails to calculate the variance of output field-quadratures and predicts a non-negligible amount of output squeezing, even if the system is in its ground state. Here we show that, for arbitrary interaction strength and for general cavity-embedded quantum systems, no squeezing can be found in the output-field quadratures if the system is in its ground state. We also apply the proposed theoretical approach to study the output squeezing produced by: (i) an artificial two-level atom embedded in a coherently-excited cavity; and (ii) a cascade-type three-level system interacting with a cavity field mode. In the latter case the output squeezing arises from the virtual photons of the atom-cavity dressed states. This work extends the possibility of predicting and analyzing the results of continuous-variable optical quantum-state tomography when optical resonators interact very strongly with other quantum systems.
Vibration insensitive optical ring cavity
Miao Jin; Jiang Yan-Yi; Fang Su; Bi Zhi-Yi; Ma Long-Sheng
2009-01-01
The mounting configuration of an optical ring cavity is optimized for vibration insensitivity by finite element analysis. A minimum response to vertical accelerations is found by simulations made for different supporting positions.
Niobium LEP 2 accelerating cavities
An accelerating cavity from LEP. This could be cut open to show the layer of niobium on the inside. Operating at 4.2 degrees above absolute zero, the niobium is superconducting and carries an accelerating field of 6 million volts per metre with negligible losses. Each cavity has a surface of 6 m2. The niobium layer is only 1.2 microns thick, ten times thinner than a hair. Such a large area had never been coated to such a high accuracy. A speck of dust could ruin the performance of the whole cavity so the work had to be done in an extremely clean environment. These challenging requirements pushed European industry to new achievements. 256 of these cavities were used in an upgrade of the LEP accelerator to double the energy of the particle beams.
SRF Cavity Fabrication and Materials
Singer, W
2014-07-17
The technological and metallurgical requirements of material for highgradient superconducting cavities are described. High-purity niobium, as the preferred metal for the fabrication of superconducting accelerating cavities, should meet exact specifications. The content of interstitial impurities such as oxygen, nitrogen, and carbon must be below 10μg/g. The hydrogen content should be kept below 2μg/g to prevent degradation of the Q-value under certain cool-down conditions. The material should be free of flaws (foreign material inclusions or cracks and laminations) that can initiate a thermal breakdown. Defects may be detected by quality control methods such as eddy current scanning and identified by a number of special methods. Conventional and alternative cavity fabrication methods are reviewed. Conventionally, niobium cavities are fabricated from sheet niobium by the formation of half-cells by deep drawing, followed by trim machining and Electron-Beam Welding (EBW). The welding of half-cells is a delicate...
Resonance Photon Generation in a Vibrating Cavity
Dodonov, V V
1998-01-01
The problem of photon creation from vacuum due to the nonstationary Casimir effect in an ideal one-dimensional Fabry--Perot cavity with vibrating walls is solved in the resonance case, when the frequency of vibrations is close to the frequency of some unperturbed electromagnetic mode: $\\omega_w=p(\\pi c/L_0)(1+\\delta)$, $|\\delta|\\ll 1$, (p=1,2,...). An explicit analytical expression for the total energy in all the modes shows an exponential growth if $|\\delta|$ is less than the dimensionless amplitude of vibrations $\\epsilon\\ll 1$, the increment being proportional to $p\\sqrt{\\epsilon^2-\\delta^2}$. The rate of photon generation from vacuum in the (j+ps)th mode goes asymptotically to a constant value $cp^2\\sin^2(\\pi j/p)\\sqrt{\\epsilon^2-\\delta^2}/[\\pi L_0 (j+ps)]$, the numbers of photons in the modes with indices p,2p,3p,... being the integrals of motion. The total number of photons in all the modes is proportional to $p^3(\\epsilon^2-\\delta^2) t^2$ in the short-time and in the long-time limits. In the case of st...
Sterility of the uterine cavity
Møller, Birger R.; Kristiansen, Frank V.; Thorsen, Poul
1995-01-01
from the same sites. Nearly a quarter of all the patients harbored one or more microorganisms in the uterus, mostly Gardnerella vaginalis, Enterobacter and Streptococcus agalactiae. We found that in a significant number of cases, the uterine cavity is colonized with potentially pathogenic organisms...... which may play a causative role in endometritis. The results indicate that inflammation of the uterine cavity should be evaluated by hysteroscopic examination before hysterectomy is undertaken in patients with persistent irregular vaginal bleeding. Udgivelsesdato: 1995-Mar...
LEP Radio Frequency Copper Cavity
The pulse of a particle accelerator. 128 of these radio frequency cavities were positioned around CERN's 27-kilometre LEP ring to accelerate electrons and positrons. The acceleration was produced by microwave electric oscillations at 352 MHz. The electrons and positrons were grouped into bunches, like beads on a string, and the copper sphere at the top stored the microwave energy between the passage of individual bunches. This made for valuable energy savings as it reduced the heat generated in the cavity.
Meesa, Indu Rekha; Srinivasan, Ashok
2015-01-01
The oral cavity is a challenging area in head and neck imaging because of its complex anatomy and the numerous pathophysiologies that involve its contents. This challenge is further compounded by the ubiquitous artifacts that arise from the dental amalgam, which compromise image quality. In this article, the anatomy of the oral cavity is discussed in brief, followed by a description of the imaging technique and some common pathologic abnormalities.
Active Control of Open Cavities
UKeiley, Lawrence
2010-01-01
Open loop edge blowing was demonstrated as an effective method for reducing the broad band and tonal components of the fluctuating surface pressure in open cavities. Closed loop has been successfully applied to low Mach number open cavities. Need to push actuators that are viable for closed loop control in bandwidth and output. Need a better understanding of the effects of control on the flow through detailed measurements so better actuation strategies can be developed.
Cellular Effects of Electromagnetic Radiation.
2014-09-26
8217-- - - .- . - .- ’*-_- - 7 - r - .STUDIES OF EXPOSURE TO AMPLITUDE-MODULATED FIELDS The electromagnetic fields to which naval personnel are exposed tend to...radiation) ,.- Biological effects of electromagnetic fields , 20. ABSTRACT (Contimee an revers side II neceesmv aiId identify by Wek numbe") , .P-Giant...cells of characean algae were examined for electrophysiological sequelae to acute electromagnetic field irradiation at 10 mW/cm Carrier frequencies
Electromagnetic field and cosmic censorship
Düztaş, Koray
2013-01-01
We construct a gedanken experiment in which an extremal Kerr black hole interacts with a test electromagnetic field. Using Teukolsky's solutions for electromagnetic perturbations in Kerr spacetime, and the conservation laws imposed by the energy momentum tensor of the electromagnetic field and the Killing vectors of the spacetime, we prove that this interaction cannot convert the black hole into a naked singularity, thus cosmic censorship conjecture is not violated in this case.
TESLA superconducting RF cavity development
Koepke, K. [Fermi National Accelerator Lab., Batavia, IL (United States); TESLA Collaboration
1995-05-01
The TESLA collaboration has made steady progress since its first official meeting at Cornell in 1990. The infrastructure necessary to assemble and test superconducting rf cavities has been installed at the TESLA Test Facility (TTF) at DESY. 5-cell, 1.3 GHz cavities have been fabricated and have reached accelerating fields of 25 MV/m. Full sized 9-cell copper cavities of TESLA geometry have been measured to verify the higher order modes present and to evaluate HOM coupling designs. The design of the TESLA 9-cell cavity has been finalized and industry has started delivery. Two prototype 9-cell niobium cavities in their first tests have reached accelerating fields of 10 MV/m and 15 MV/m in a vertical dewar after high peak power (HPP) conditioning. The first 12 m TESLA cryomodule that will house 8 9-cell cavities is scheduled to be delivered in Spring 1995. A design report for the TTF is in progress. The TTF test linac is scheduled to be commissioned in 1996/1997. (orig.).
A physically motivated quantization of the electromagnetic field
Bennett, Robert; Barlow, Thomas M.; Beige, Almut
2016-01-01
The notion that the electromagnetic field is quantized is usually inferred from observations such as the photoelectric effect and the black-body spectrum. However accounts of the quantization of this field are usually mathematically motivated and begin by introducing a vector potential, followed by the imposition of a gauge that allows the manipulation of the solutions of Maxwell’s equations into a form that is amenable for the machinery of canonical quantization. By contrast, here we quantize the electromagnetic field in a less mathematically and more physically motivated way. Starting from a direct description of what one sees in experiments, we show that the usual expressions of the electric and magnetic field observables follow from Heisenberg’s equation of motion. In our treatment, there is no need to invoke the vector potential in a specific gauge and we avoid the commonly used notion of a fictitious cavity that applies boundary conditions to the field.
Electromagnetic fields in biological systems
Lin, James C
2012-01-01
"Focusing on exposure, induced fields, and absorbed energy, this volume covers the interaction of electromagnetic fields and waves with biological systems, spanning static fields to terahertz waves...
Battlefield Electromagnetic Environments Office (BEEO)
Federal Laboratory Consortium — The Battlefield Electromagnetic Environments Office (BEEO) develops, maintains, and operates the Army Materiel Command (AMC) databases for spectrum management, per...
Method of moments in electromagnetics
Gibson, Walton C
2007-01-01
Responding to the need for a clear, up-to-date introduction to the field, The Method of Moments in Electromagnetics explores surface integral equations in electromagnetics and presents their numerical solution using the method of moments (MOM) technique. It provides the numerical implementation aspects at a nuts-and-bolts level while discussing integral equations and electromagnetic theory at a higher level. The author covers a range of topics in this area, from the initial underpinnings of the MOM to its current applications. He first reviews the frequency-domain electromagnetic theory and t
Electromagnetic waves in stratified media
Wait, James R; Fock, V A; Wait, J R
2013-01-01
International Series of Monographs in Electromagnetic Waves, Volume 3: Electromagnetic Waves in Stratified Media provides information pertinent to the electromagnetic waves in media whose properties differ in one particular direction. This book discusses the important feature of the waves that enables communications at global distances. Organized into 13 chapters, this volume begins with an overview of the general analysis for the electromagnetic response of a plane stratified medium comprising of any number of parallel homogeneous layers. This text then explains the reflection of electromagne
Park, Hyeonil; Lee, Jinwoo; Kim, Se-Jong; Lee, Youngseon; Kim, Daeyong
2016-08-01
The purpose of this study is to investigate the influences of numerical parameters on the electromagnetic forming (EMF) simulation. The 3-dimensional coupled electromagnetic- mechanical simulations were conducted to predict the deformation behavior of the advanced high strength steel (AHSS) sheet receiving support in EMF with aluminum driver sheet. Dual phase (DP) 780 steel workpiece was formed into a hemi elliptical protrusion shape with aluminum alloy AA1050 driver sheet using a flat spiral coil actuator and open cavity die. The deformed shape of the DP780 workpiece and the computation time with respect to element size, N cycle number and time step of electromagnetic (EM) solver were analysed.
Electromagnetic waves and photons
Hofmann, Ralf
2015-01-01
We explore how the thermal ground states of two mixing and pure SU(2) Yang-Mills theories, SU(2)$_{\\tiny\\mbox{CMB}}$ of scale $\\Lambda_{\\tiny\\mbox{CMB}}\\sim 10^{-4}\\,$eV and SU(2)$_{e}$ of scale $\\Lambda_{e}\\sim 5\\times 10^5\\,$eV, associate either wave or particle aspects to electromagnetic disturbances during thermalisation towards the photon gas of a blackbody, in realising the photoelectric effect, and through the frequency dependence of the monochromatic, nonthermal beam structure in Thomson/Compton scattering.
Electromagnetism from counting
Noyes, H.P.
1992-12-01
The fact that experimental accuracy is finite makes the measurement of particle positions and velocities non-local and often non- commutative even in a scale invariant theory. Applied to electromagnetic and gravitational phenomena, we argue that this leads to a relativistic action at a distance theory in which fields'' are simple a quasi-local interpolating concept extrapolated from macroscopic conservation laws. We sketch how this analysis could lead to classical field equations as a macroscopic approximation to relativistic quantum mechanics, but do not construct a formal proof.
Electromagnetism from counting
Noyes, H.P.
1992-12-01
The fact that experimental accuracy is finite makes the measurement of particle positions and velocities non-local and often non- commutative even in a scale invariant theory. Applied to electromagnetic and gravitational phenomena, we argue that this leads to a relativistic action at a distance theory in which ``fields`` are simple a quasi-local interpolating concept extrapolated from macroscopic conservation laws. We sketch how this analysis could lead to classical field equations as a macroscopic approximation to relativistic quantum mechanics, but do not construct a formal proof.
Introduction to electromagnetic engineering
Harrington, Roger E
2003-01-01
This study of electromagnetic theory introduces students to a broad range of quantities and concepts, imparting the necessary vector analysis and associated mathematics and reinforcing its teachings with several elementary field problems. Based on circuit theory rather than on the classical force-relationship approach, the text uses the theory of electric circuits to provide a system of experiments already familiar to the electrical engineer; a series of field concepts are then introduced as a logical extension of circuit theory. Virtually unobtainable elsewhere, this text was written by a pr
Visinelli, Luca
2014-01-01
We extend the duality symmetry between the electric and the magnetic fields to the case in which an additional axion-like term is present, and we derive the set of Maxwell's equations that preserves this symmetry. This new set of equations allows for a gauge symmetry extending the ordinary symmetry in the classical electrodynamics. We obtain explicit solutions for the new set of equations in the absence of external sources, and we discuss the implications of a new internal symmetry between the axion field and the electromagnetic gauge potential.
Handbook of electromagnetic compatibility
1995-01-01
This""know-how""book gives readers a concise understanding of the fundamentals of EMC, from basic mathematical and physical concepts through present, computer-age methods used in analysis, design, and tests. With contributions from leading experts in their fields, the text provides a comprehensive overview. Fortified with information on how to solve potential electromagnetic interference (EMI) problems that may arise in electronic design, practitioners will be betterable to grasp the latest techniques, trends, and applications of this increasingly important engineering discipline.Handbook of E
Cavity-mediated entanglement between distant atoms: Effect of spatial dispersion
Brouard, S., E-mail: sbrouard@ull.e [Departamento de Fisica Fundamental II, Universidad de La Laguna, La Laguna E38204, Tenerife (Spain); Instituto Universitario de Estudios Avanzados (IUdEA) en Fisica Atomica, Molecular y Fotonica, Universidad de La Laguna, La Laguna E38204, Tenerife (Spain); Martinez, R. [Departamento de Fisica Fundamental II, Universidad de La Laguna, La Laguna E38204, Tenerife (Spain)
2011-04-11
The decoherence effect of spatial atomic dispersion on entangled states prepared between two non-interacting atoms that pass through a resonant electromagnetic cavity is studied in detail. Entanglement is shown to oscillate with the atom-field interaction time with an amplitude that decays due to inhomogeneous coupling strength. An upper bound for the entanglement that can be obtained using this procedure is introduced and evaluated numerically for different sets of system parameters. This magnitude depends solely on the overlap between atomic wavefunctions evolved according to two different atom-field interactions. Analytical expressions for the associated decay rate are obtained under different approximations. - Highlights: Preparation of entangled atomic states mediated by a resonant electromagnetic cavity. Decoherent effect of spatial atomic dispersion is studied. Entanglement is evaluated for different sets of system parameters. An upper bound for the entanglement achievable is introduced and discussed. Different analytical approximations for the decay rate are presented.
Fractal apertures in waveguides, conducting screens and cavities analysis and design
Ghosh, Basudeb; Kartikeyan, M V
2014-01-01
This book deals with the design and analysis of fractal apertures in waveguides, conducting screens and cavities using numerical electromagnetics and field-solvers. The aim is to obtain design solutions with improved accuracy for a wide range of applications. To achieve this goal, a few diverse problems are considered. The book is organized with adequate space dedicated for the design and analysis of fractal apertures in waveguides, conducting screens, and cavities, microwave/millimeter wave applications followed by detailed case-study problems to infuse better insight and understanding of the subject. Finally, summaries and suggestions are given for future work. Fractal geometries were widely used in electromagnetics, specifically for antennas and frequency selective surfaces (FSS). The self-similarity of fractal geometry gives rise to a multiband response, whereas the space-filling nature of the fractal geometries makes it an efficient element in antenna and FSS unit cell miniaturization. Until now, no e...
Polishing Difficult-To-Reach Cavities
Malinzak, R. Michael; Booth, Gary N.
1990-01-01
Springy abrasive tool used to finish surfaces of narrow cavities made by electrical-discharge machining. Robot arm moves vibrator around perimeters of cavities, polishing walls of cavities as it does so. Tool needed because such cavities inaccessible or at least difficult to reach with most surface-finishing tools.
Nano-scale optical actuation based on two-dimensional heterostructure photonic crystal cavities
Lin, Tong; Zhou, Guangya; Chau, Fook Siong; Tian, Feng; Deng, Jie
2015-03-01
Nowadays, nano-electro-mechanical systems (NEMS) actuators using electrostatic forces are facing the bottleneck of the electromagnetic interference which greatly degrades their performances. On the contrary, the hybrid circuits driven by optical gradient forces which are immune to the electromagnetic interference show prominent advantages in communication, quantum computation, and other application systems. In this paper we propose an optical actuator utilizing the optical gradient force generated by a hetero-structure photonic crystal cavity. This type of cavity has a longitudinal air-slot and characteristics of ultrahigh quality factor (Q) and ultra-small mode volume (V) which is capable of producing a much larger force compared with the waveguide-based structures. Due to the symmetry property, attractive optical gradient force is generated. Additionally, the optomechanical coefficient (gom) of this cavity is two orders of magnitude larger than that of the coupled nanobeam photonic crystal cavities. The 2D hetero-structure cavity, comb drives, folded beam suspensions and the displacement sensor compose the whole device. The cavity serves as the optical actuator whilst the butt-coupled waveguide acts as the displacement sensor which is theoretically proved to be insensitive to the temperature variations. As known, the thermo-optic effect prevails especially in the cavity-based structures. The butt-coupled waveguide can be used to decouple the thermal effect and the optoemchanical effect (OM) with the aid of comb drives. The results demonstrate that the proposed optical gradient force actuator show great potential in the future of all-optical reconfigurable circuits.
Ying, Kang; Chen, Dijun; Cai, Haiwen; Qu, Ronghui; Gong, Shangqing
2013-01-01
A tunable high resolution frequency reference is constructed using the narrowed cavity-linewidth by the optical pumping-assisted V-type electromagnetically induced transparency (EIT). At room temperature, the optical pumping effect will increase the transparency for the V-type EIT and therefore the cavity-linewidth can be narrowed apparently. For the seven EITs observed in our previous study, cavity-linewidth narrowing is observed in all of them. More importantly, we find that the cavity-linewidth can keep at 1.2MHz in a wide frequency range of 100MHz by utilizing the central EIT. This property provides a novel way for constructing high resolution tunable frequency reference via the intracavity EIT.
Electromagnetically induced transparency and slow light in two-mode optomechanics
Jiang, Cheng; Cui, Yuanshun; Li, Xiaowei
2013-01-01
We theoretically demonstrate the mechanically mediated electromagnetically induced transparency in a two-mode cavity optomechanical system, where two cavity modes are coupled to a common mechanical resonator. When the two cavity modes are driven on their respective red sidebands by two pump beams, a transparency window appears in the probe transmission spectrum due to destructive interference. Under this situation the transmitted probe beam can be delayed as much as 4 us, which can be easily controlled by the power of the pump beams. In addition, we also investigate the amplification of the transmitted probe beam owing to constructive interference when one cavity is driven on its blue sideband while another one is driven on its red sideband.
Fabrication of elliptical SRF cavities
Singer, W.
2017-03-01
The technological and metallurgical requirements of material for high-gradient superconducting cavities are described. High-purity niobium, as the preferred metal for the fabrication of superconducting accelerating cavities, should meet exact specifications. The content of interstitial impurities such as oxygen, nitrogen, and carbon must be below 10 μg g-1. The hydrogen content should be kept below 2 μg g-1 to prevent degradation of the quality factor (Q-value) under certain cool-down conditions. The material should be free of flaws (foreign material inclusions or cracks and laminations) that can initiate a thermal breakdown. Traditional and alternative cavity mechanical fabrication methods are reviewed. Conventionally, niobium cavities are fabricated from sheet niobium by the formation of half-cells by deep drawing, followed by trim machining and electron beam welding. The welding of half-cells is a delicate procedure, requiring intermediate cleaning steps and a careful choice of weld parameters to achieve full penetration of the joints. A challenge for a welded construction is the tight mechanical and electrical tolerances. These can be maintained by a combination of mechanical and radio-frequency measurements on half-cells and by careful tracking of weld shrinkage. The main aspects of quality assurance and quality management are mentioned. The experiences of 800 cavities produced for the European XFEL are presented. Another cavity fabrication approach is slicing discs from the ingot and producing cavities by deep drawing and electron beam welding. Accelerating gradients at the level of 35-45 MV m-1 can be achieved by applying electrochemical polishing treatment. The single-crystal option (grain boundary free) is discussed. It seems that in this case, high performance can be achieved by a simplified treatment procedure. Fabrication of the elliptical resonators from a seamless pipe as an alternative is briefly described. This technology has yielded good
3D cavity detection technique and its application based on cavity auto scanning laser system
LIU Xi-ling; LI Xi-bing; LI Fa-ben; ZHAO Guo-yan; QIN Yu-hui
2008-01-01
Ground constructions and mines are severely threatened by underground cavities especially those unsafe or inaccessible ones. Safe and precise cavity detection is vital for reasonable cavity evaluation and disposal. The conventional cavity detection methods and their limitation were analyzed. Those methods cannot form 3D model of underground cavity which is used for instructing the cavity disposal; and their precisions in detection are always greatly affected by the geological circumstance. The importance of 3D cavity detection in metal mine for safe exploitation was pointed out; and the 3D cavity laser detection method and its principle were introduced. A cavity auto scanning laser system was recommended to actualize the cavity 3D detection after comparing with the other laser detection systems. Four boreholes were chosen to verify the validity of the cavity auto scanning laser system. The results show that the cavity auto scanning laser system is very suitable for underground 3D cavity detection, especially for those inaccessible ones.
Optothermal transport behavior in whispering gallery mode optical cavities
Soltani, Soheil [Ming Hsieh Department of Electrical Engineering-Electrophysics, University of Southern California, Los Angeles, California 90089 (United States); Armani, Andrea M., E-mail: armani@usc.edu [Ming Hsieh Department of Electrical Engineering-Electrophysics, University of Southern California, Los Angeles, California 90089 (United States); Mork Family Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, California 90089 (United States)
2014-08-04
Over the past century, whispering gallery mode optical cavities have enabled numerous advances in science and engineering, such as discoveries in quantum mechanics and non-linear optics, as well as the development of optical gyroscopes and add drop filters. One reason for their widespread appeal is their ability to confine light for long periods of time, resulting in high circulating intensities. However, when sufficiently large amounts of optical power are coupled into these cavities, they begin to experience optothermal or photothermal behavior, in which the optical energy is converted into heat. Above the optothermal threshold, the resonance behavior is no longer solely defined by electromagnetics. Previous work has primarily focused on the role of the optothermal coefficient of the material in this instability. However, the physics of this optothermal behavior is significantly more complex. In the present work, we develop a predictive theory based on a generalizable analytical expression in combination with a geometry-specific COMSOL Multiphysics finite element method model. The simulation couples the optical and thermal physics components, accounting for geometry variations as well as the temporal and spatial profile of the optical field. To experimentally verify our theoretical model, the optothermal thresholds of a series of silica toroidal resonant cavities are characterized at different wavelengths (visible through near-infrared) and using different device geometries. The silica toroid offers a particularly rigorous case study for the developed optothermal model because of its complex geometrical structure which provides multiple thermal transport paths.
Modulation of a CO/sub 2/ laser by plasma injection into the cavity
John, P.K. (Western Ontario, University, London, Canada); Box, S.J.C.
1980-05-01
Observations of simultaneous Q-switching and mode-locking have been made in a TEA CO/sub 2/ laser when a low density underdense plasma was injected into the cavity. The plasma which was produced in an electromagnetic shock tube had a density of 10 to the 17th per cu cm. A likely mechanism for mode-locking is the time dependent plasma refractive index leading to phase perturbation.
Parametric generation of radiation in a dynamic cavity with frequency dispersion
Rosanov, N N; Fedorov, E G; Matskovsky, A A [Federal State Unitary Enterprise ' Scientific and Industrial Corporation ' Vavilov State Optical Institute' , St. Petersburg (Russian Federation)
2016-01-31
A numerical simulation of the parametric generation of electromagnetic radiation in a cavity with periodically oscillating mirrors and Lorentz-type frequency dispersion has been performed. It is shown that initially weak seed radiation can be transformed into intense short pulses, the shape of which under steady-state conditions changes periodically when reflecting from mirrors and, depending on the dispersion characteristics, corresponds to uni- or bipolar pulses. (letters)
Resonance frequency shift in a cavity with a thin conducting film near a conducting wall
Braggio, C. [Dipartimento di Fisica, Universita di Ferrara and INFN, Via del Paradiso 12, 44100 Ferrara (Italy)]. E-mail: caterina.braggio@lnl.infn.it; Bressi, G. [INFN, Sezione di Pavia, Via Bassi 6, 27100 Pavia (Italy); Carugno, G. [INFN, Sezione di Padova, Via F. Marzolo 8, 35131 Padova (Italy); Dodonov, A.V. [Departamento de Fisica, Universidade Federal de Sao Carlos, Via Washington Luiz, Km 235, Sao Carlos 13565-905, SP (Brazil); Dodonov, V.V. [Instituto de Fisica, Universidade de Brasilia, Caixa Postal 04455, 70910-900 Brasilia, DF (Brazil)]. E-mail: vdodonov@fis.unb.br; Galeazzi, G. [INFN, LNL, Viale dell' Universita 2, 35020 Legnaro (Italy); Ruoso, G. [INFN, LNL, Viale dell' Universita 2, 35020 Legnaro (Italy); Zanello, D. [INFN, Sezione di Roma, Piazzale A. Moro 2, 00185 Roma (Italy)
2007-03-19
We show that a very thin conducting film (whose thickness can be much smaller than the skin depth), placed nearby a wall of an electromagnetic cavity, can produce the same shift of the resonance frequency as a bulk conducting slab, provided the displacement of the film from the wall is much bigger than the skin depth. We derive a simple analytical formula for the frequency shift and compare it with exact numerical calculations and experimental data.
Effect of scalar field mass on gravitating charged scalar solitons and black holes in a cavity
Ponglertsakul, Supakchai; Winstanley, Elizabeth
2017-01-01
We study soliton and black hole solutions of Einstein charged scalar field theory in cavity. We examine the effect of introducing a scalar field mass on static, spherically symmetric solutions of the field equations. We focus particularly on the spaces of soliton and black hole solutions, as well as studying their stability under linear, spherically symmetric perturbations of the metric, electromagnetic field, and scalar field.
Effect of scalar field mass on gravitating charged scalar solitons and black holes in a cavity
Ponglertsakul, Supakchai
2016-01-01
We study soliton and black hole solutions of Einstein charged scalar field theory in cavity. We examine the effect of introducing a scalar field mass on static, spherically symmetric solutions of the field equations. We focus particularly on the spaces of soliton and black hole solutions, as well as studying their stability under linear, spherically symmetric perturbations of the metric, electromagnetic field, and scalar field.
Half-period Aharonov-Bohm oscillations in disordered rotating optical ring cavities
Li, Huanan; Shapiro, Boris
2016-01-01
There exists an analogy between Maxwell equations in a rotating frame and Schr\\"odinger equation for a charged particle in the presence of a magnetic field. We exploit this analogy to point out that electromagnetic phenomena in the rotating frame, under appropriate conditions, can exhibit periodicity with respect to the angular velocity of rotation. In particular, in disordered ring cavities one finds the optical analog of the Al'tshuler-Aronov-Spivak effect well known in mesoscopic physics of disordered metals.
Metamaterials beyond electromagnetism.
Kadic, Muamer; Bückmann, Tiemo; Schittny, Robert; Wegener, Martin
2013-12-01
Metamaterials are rationally designed man-made structures composed of functional building blocks that are densely packed into an effective (crystalline) material. While metamaterials are mostly associated with negative refractive indices and invisibility cloaking in electromagnetism or optics, the deceptively simple metamaterial concept also applies to rather different areas such as thermodynamics, classical mechanics (including elastostatics, acoustics, fluid dynamics and elastodynamics), and, in principle, also to quantum mechanics. We review the basic concepts, analogies and differences to electromagnetism, and give an overview on the current state of the art regarding theory and experiment-all from the viewpoint of an experimentalist. This review includes homogeneous metamaterials as well as intentionally inhomogeneous metamaterial architectures designed by coordinate-transformation-based approaches analogous to transformation optics. Examples are laminates, transient thermal cloaks, thermal concentrators and inverters, 'space-coiling' metamaterials, anisotropic acoustic metamaterials, acoustic free-space and carpet cloaks, cloaks for gravitational surface waves, auxetic mechanical metamaterials, pentamode metamaterials ('meta-liquids'), mechanical metamaterials with negative dynamic mass density, negative dynamic bulk modulus, or negative phase velocity, seismic metamaterials, cloaks for flexural waves in thin plates and three-dimensional elastostatic cloaks.
Electromagnetically Induced Entanglement.
Yang, Xihua; Xiao, Min
2015-08-28
Quantum entanglement provides an essential resource for quantum computation, quantum communication, and quantum network. How to conveniently and efficiently produce entanglement between bright light beams presents a challenging task to build realistic quantum information processing networks. Here, we present an efficient and convenient way to realize a novel quantum phenomenon, named electromagnetically induced entanglement, in the conventional Λ-type three-level atomic system driven by a strong pump field and a relatively weak probe field. Nearly perfect entanglement between the two fields can be achieved with a low coherence decay rate between the two lower levels, high pump-field intensity, and large optical depth of the atomic ensemble. The physical origin is quantum coherence between the lower doublet produced by the pump and probe fields, similar to the well-known electromagnetically induced transparency. This method would greatly facilitate the generation of nondegenerate narrow-band continuous-variable entanglement between bright light beams by using only coherent laser fields, and may find potential and broad applications in realistic quantum information processing.
The HPS electromagnetic calorimeter
Balossino, I.; Baltzell, N.; Battaglieri, M.; Bondì, M.; Buchanan, E.; Calvo, D.; Celentano, A.; Charles, G.; Colaneri, L.; D'Angelo, A.; Napoli, M. De; Vita, R. De; Dupré, R.; Egiyan, H.; Ehrhart, M.; Filippi, A.; Garçon, M.; Gevorgyan, N.; Girod, F.-X.; Guidal, M.; Holtrop, M.; Iurasov, V.; Kubarovsky, V.; Livingston, K.; McCarty, K.; McCormick, J.; McKinnon, B.; Osipenko, M.; Paremuzyan, R.; Randazzo, N.; Rauly, E.; Raydo, B.; Rindel, E.; Rizzo, A.; Rosier, P.; Sipala, V.; Stepanyan, S.; Szumila-Vance, H.; Weinstein, L. B.
2017-05-01
The Heavy Photon Search experiment (HPS) is searching for a new gauge boson, the so-called ;heavy photon.; Through its kinetic mixing with the Standard Model photon, this particle could decay into an electron-positron pair. It would then be detectable as a narrow peak in the invariant mass spectrum of such pairs, or, depending on its lifetime, by a decay downstream of the production target. The HPS experiment is installed in Hall-B of Jefferson Lab. This article presents the design and performance of one of the two detectors of the experiment, the electromagnetic calorimeter, during the runs performed in 2015-2016. The calorimeter's main purpose is to provide a fast trigger and reduce the copious background from electromagnetic processes through matching with a tracking detector. The detector is a homogeneous calorimeter, made of 442 lead-tungstate (PbWO4) scintillating crystals, each read out by an avalanche photodiode coupled to a custom trans-impedance amplifier.
Electromagnetic interaction of metamaterials
Canales, Peter R.
The observation of extraordinary transmission through subwavelength apertures has propelled a great interest in understanding its nature. It defies classical theories of electromagnetic interaction by demanding a closer examination of the surface properties. Traditionally, as surface features become much smaller in size than a single wavelength of interest, the structure is essentially continuous. Any periodic subwavelength corrugation or aperture array should not interact strongly with an incident field and therefore not contribute to any significant transmission through the film. We find that this is not always the case and that we may tune the surface geometry at these scales to affect the overall medium behavior. It is possible that a material may transcend its own natural properties and, in essence, become a metamaterial. The following analysis examines the concepts of metamaterials from a fundamental viewpoint. It does not seek to disrupt classical theories but instead demonstrates their validity to describe a new phenomenon. Several theories have been proposed that offer unique surface interactions as evidence of enhanced transmission. It is proposed that a fundamental Maxwell representation is sufficient in predicting the interaction of an electromagnetic wave with a metamaterial. In particular, a formalism has been developed to analyze enhanced transmission through a metallic grating structure. To experimentally validate this model, a fabrication procedure has been developed that allows for the production of quality thick film structures with subwavelength features. Finally, the analysis of metamaterials looks towards the RF spectrum to demonstrate a novel design to achieve conformal waveguides and antennas.
The HPS electromagnetic calorimeter
Balossino, Ilaria; Battaglieri, Marco; Bondi, Mariangela; Buchanan, Emma; Calvo, Daniela; Celentano, Andrea; Charles, Gabriel; Colaneri, Luca; D'Angelo, Annalisa; De Napoli, Marzio; De Vita, Raffaella; Dupre, Raphael; Ehrhart, Mathieu; Filippi, Alessandra; Garcon, Michel; Girod, Francois-Xavier; Guidal, Michel; Holtrop, Maurik; Iurasov, Volodymyr; Kubarovsky, Valery; McCarty, Kyle; McCormick, Jeremy; Osipenko, Mikhail; Paremuzyan, Rafayel; Randazzo, Nunzio; Rauly, Emmanuel; Raydo, Benjamin; Rindel, Emmanuel; Rizzo, Alessandro; Rosier, Philippe; Sipala, Valeria; Stepanyan, Stepan; Szumila-Vance, Holly; Weinstein, Lawrence
2016-01-01
The Heavy Photon Search experiment (HPS) is searching for a new gauge boson, the so-called "heavy photon". Through its kinetic mixing with the Standard Model photon, this particle could decay into an electron-positron pair. It would then be detectable as a narrow peak in the invariant mass spectrum of such pairs, or, depending on its lifetime, by a decay downstream of the production target. The HPS experiment is installed in Hall-B of Jefferson Lab. This article presents the design and performance of one of the two detectors of the experiment, the electromagnetic calorimeter, during the runs performed in 2015-2016. The calorimeter's main purpose is to provide a fast trigger and reduce the copious background from electromagnetic processes through matching with a tracking detector. The detector is a homogeneous calorimeter, made of 442 lead-tungsten (PbWO$_4$) scintillating crystals, each read-out by an avalanche photodiode coupled to a custom trans-impedance amplifier.
Arrayás, M.; Bouwmeester, D.; Trueba, J. L.
2017-01-01
Maxwell equations in vacuum allow for solutions with a non-trivial topology in the electric and magnetic field line configurations at any given moment in time. One example is a space filling congruence of electric and magnetic field lines forming circles lying on the surfaces of nested tori. In this example the electric, magnetic and Poynting vector fields are orthogonal everywhere. As time evolves the electric and magnetic fields expand and deform without changing the topology and energy, while the Poynting vector structure remains unchanged while propagating with the speed of light. The topology is characterized by the concept of helicity of the field configuration. Helicity is an important fundamental concept and for massless fields it is a conserved quantity under conformal transformations. We will review several methods by which linked and knotted electromagnetic (spin-1) fields can be derived. A first method, introduced by A. Rañada, uses the formulation of the Maxwell equations in terms of differential forms combined with the Hopf map from the three-sphere S3 to the two-sphere S2. A second method is based on spinor and twistor theory developed by R. Penrose in which elementary twistor functions correspond to the family of electromagnetic torus knots. A third method uses the Bateman construction of generating null solutions from complex Euler potentials. And a fourth method uses special conformal transformations, in particular conformal inversion, to generate new linked and knotted field configurations from existing ones. This fourth method is often accompanied by shifting singularities in the field to complex space-time points. Of course the various methods must be closely related to one another although they have been developed largely independently and they suggest different directions in which to expand the study of topologically non-trivial field configurations. It will be shown how the twistor formulation allows for a direct extension to massless
Wang Jiang
2014-03-01
Full Text Available When partial discharge occurs in Gas Insulated Switchgear (GIS with insulation defects, Ultrahigh-Frequency (UHF electromagnetic wave up to several MHz and GHz will be exited and propagate inside GIS cavity. This study, based on the propagation theory of electromagnetic waves in coaxial waveguide, performs simulation analysis of the relationship between PD pulse form and the exited UHF electromagnetic wave using Finite-Deferential Time-Domain (FDTD algorithm. First, we study the relationship of partial discharge magnitude and electric field strength of electromagnetic wave. It is found that the changes of partial discharge magnitude have little effect on electric field strength of electromagnetic wave at certain variation rate of PD pulse current. Next, we examine the relationship of variation rate of PD pulse current to electric field strength of electromagnetic wave. It is pointed out that, at a certain partial discharge magnitude, the two are approximately linearly related. Finally, we study the impact of variation rate of PD pulse current on higher mode components. Variation coefficient is used to analyze the proportion of higher mode components in electromagnetic wave. The proportion of higher mode components increases with increasing variation rate of PD pulse current.
Electromagnetic actuation in MEMS switches
Oliveira Hansen, Roana Melina de; Mátéfi-Tempfli, Mária; Chemnitz, Steffen
. Electromagnetic actuation is a very promising approach to operate such MEMS and Power MEMS devices, due to the long range, reproducible and strong forces generated by this method, among other advantages. However, the use of electromagnetic actuation in such devices requires the use of thick magnetic films, which...
Electromagnetic compatibility in power electronics
Costa , François; Revol , Bertrand
2014-01-01
Scientists largely attribute the recent deterioration of the electromagnetic environment to power electronics. This realization has spurred the study of methodical approaches to electromagnetic compatibility designs as explored in this text. The book addresses major challenges, such as handling numerous parameters vital to predicting electro magnetic effects and achieving compliance with line-harmonics norms, while proposing potential solutions.
The ESS elliptical cavity cryomodules
Darve, Christine; Bosland, Pierre; Devanz, Guillaume; Olivier, Gilles; Renard, Bertrand; Thermeau, Jean-Pierre
2014-01-01
The European Spallation Source (ESS) is a multi-disciplinary research centre under design and construction in Lund, Sweden. This new facility is funded by a collaboration of 17 European countries and is expected to be up to 30 times brighter than today's leading facilities and neutron sources. The ESS will enable new opportunities for researchers in the fields of life sciences, energy, environmental technology, cultural heritage and fundamental physics. A 5 MW long pulse proton accelerator is used to reach this goal. The pulsed length is 2.86 ms, the repetition frequency is 14 Hz (4 % duty cycle), and the beam current is 62.5 mA. The superconducting section of the Linac accelerates the beam from 80 MeV to 2.0 GeV. It is composed of one string of spoke cavity cryomodule and two strings of elliptical cavity cryomodules. These cryomodules contain four elliptical Niobium cavities operating at 2 K and at a frequency of 704.42 MHz. This paper introduces the thermo-mechanical design, the prototyping and the expected operation of the ESS elliptical cavity cryomodules. An Elliptical Cavity Cryomodule Technology Demonstrator (ECCTD) will be built and tested in order to validate the ESS series production.
The ESS spoke cavity cryomodules
Bousson, Sebastien; Darve, Christine; Duthil, Patxi; Elias, Nuno; Molloy, Steve; Reynet, Denis; Thermeau, Jean-Pierre
2014-01-01
The European Spallation Source (ESS) is a multi-disciplinary research centre under design and construction in Lund, Sweden. This new facility is funded by a collaboration of 17 European countries and is expected to be up to 30 times brighter than today's leading facilities and neutron sources. The ESS will enable new opportunities for researchers in the fields of life sciences, energy, environmental technology, cultural heritage and fundamental physics. A 5 MW long pulse proton accelerator is used to reach this goal. The pulsed length is 2.86 ms, the repetition frequency is 14 Hz (4 % duty cycle), and the beam current is 62.5 mA. It is composed of one string of spoke cavity cryomodule and two strings of elliptical cavity cryomodules. This paper introduces the thermo-mechanical design and expected operation of the ESS spoke cavity cryomodules. These cryomodules contain two double spoke bulk Niobium cavities operating at 2 K and at a frequency of 352.21 MHz. The superconducting section of the Spoke Linac accelerates the beam from 90 MeV to 220 MeV. A Spoke Cavity Cryomodule Technology Demonstrator will be built and tested in order to validate the ESS series production.
Acoustic–electromagnetic effects of tectonic movements of the crust – borehole survey
V. N. Uvarov
2015-04-01
Full Text Available Borehole radiophysical properties are briefly described. Borehole investigation of lithosphere acoustic-electromagnetic radiation was carried out in a seismically active region. Four main types of anomalies of acoustic-electromagnetic radiation were distinguished. They correspond to shear and bulk relaxations of tectonic stress. Stability of phase relations of acoustic and electromagnetic signals in the region of anomalies was detected that allows us to state their coherence. It was concluded that the reason of mutual coherence of acoustic and electromagnetic signals is the magnetoelastic effect of the casing pipe. A mechanism of generation of rock self-induced vibrations during tectonic stress relaxation causing acoustic-electromagnetic emission was suggested. It was concluded that "sigmoid" anomalies may correlate with excitation of eigen vibrations in a fracture cavity during brittle shear relaxation of rock tectonic stress. An explanation of the change of anomalous "sigmoid" signal frequency was given. It is considered to be the result of growth of rock fracture cavity and the decrease of tectonic stress relaxation. It was concluded that a borehole, cased in a steel pipe, together with a system of inductance coils and a hydrophone is the effective sounding sensor for acoustic fields of interior deep layers. It may be applied to investigate and to monitor the geodynamic activity, in particular, in earthquake forecasts and in monitoring of hydrocarbon deposits during their production.
Acoustic-electromagnetic effects of tectonic movements of the crust - borehole survey
Uvarov, V. N.; Malkin, E. I.; Druzhin, G. I.; Sannikov, D. V.; Pukhov, V. M.
2015-04-01
Borehole radiophysical properties are briefly described. Borehole investigation of lithosphere acoustic-electromagnetic radiation was carried out in a seismically active region. Four main types of anomalies of acoustic-electromagnetic radiation were distinguished. They correspond to shear and bulk relaxations of tectonic stress. Stability of phase relations of acoustic and electromagnetic signals in the region of anomalies was detected that allows us to state their coherence. It was concluded that the reason of mutual coherence of acoustic and electromagnetic signals is the magnetoelastic effect of the casing pipe. A mechanism of generation of rock self-induced vibrations during tectonic stress relaxation causing acoustic-electromagnetic emission was suggested. It was concluded that "sigmoid" anomalies may correlate with excitation of eigen vibrations in a fracture cavity during brittle shear relaxation of rock tectonic stress. An explanation of the change of anomalous "sigmoid" signal frequency was given. It is considered to be the result of growth of rock fracture cavity and the decrease of tectonic stress relaxation. It was concluded that a borehole, cased in a steel pipe, together with a system of inductance coils and a hydrophone is the effective sounding sensor for acoustic fields of interior deep layers. It may be applied to investigate and to monitor the geodynamic activity, in particular, in earthquake forecasts and in monitoring of hydrocarbon deposits during their production.
Gravitational scattering of electromagnetic radiation
Brooker, J. T.; Janis, A. I.
1980-01-01
The scattering of electromagnetic radiation by linearized gravitational fields is studied to second order in a perturbation expansion. The incoming electromagnetic radiation can be of arbitrary multipole structure, and the gravitational fields are also taken to be advanced fields of arbitrary multipole structure. All electromagnetic multipole radiation is found to be scattered by gravitational monopole and time-varying dipole fields. No case has been found, however, in which any electromagnetic multipole radiation is scattered by gravitational fields of quadrupole or higher-order multipole structure. This lack of scattering is established for infinite classes of special cases, and is conjectured to hold in general. The results of the scattering analysis are applied to the case of electromagnetic radiation scattered by a moving mass. It is shown how the mass and velocity may be determined by a knowledge of the incident and scattered radiation.
Hybrid synchronous motor electromagnetic torque research
Suvorkova Elena E.
2014-01-01
Full Text Available Electromagnetic field distribution models in reluctance and permanent magnet parts were made by means of Elcut. Dependences of electromagnetic torque on torque angle were obtained.
Electromagnetic Interference (EMI) and TEMPEST Test Facility
Federal Laboratory Consortium — Electromagnetic Interference (EMI), Electromagnetic Compatibility (EMC) and TEMPEST testing are conducted at EPG's Blacktail Canyon Test Facility in one of its two...
Macroscopic quantum electrodynamics of high-Q cavities
Khanbekyan, Mikayel
2009-10-27
In this thesis macroscopic quantum electrodynamics in linear media was applied in order to develop an universally valid quantum theory for the description of the interaction of the electromagnetic field with atomic sources in high-Q cavities. In this theory a complete description of the characteristics of the emitted radiation is given. The theory allows to show the limits of the applicability of the usually applied theory. In order to establish an as possible generally valid theory first the atom-field interaction was studied in the framework of macroscopic quantum electrodynamics in dispersive and absorptive media. In order to describe the electromagnetic field from Maxwell's equations was started, whereby the noise-current densities, which are connected with the absorption of the medium, were included. The solution of these equations expresses the electromagnetic field variables by the noise-current densities by means of Green's tensor of the macroscopic Maxwell equations. The explicit quantization is performed by means of the noise-current densities, whereby a diagonal Hamiltonian is introduced, which then guarantees the time development according to Maxwell's equation and the fulfillment of the fundamental simultaneous commutation relations of the field variables. In the case of the interaction of the medium-supported field with atoms the Hamiltonian must be extended by atom-field interactions energies, whereby the canonical coupling schemes of the minimal or multipolar coupling can be used. The dieelectric properties of the material bodies as well as their shape are coded in the Green tensor of the macroscopic Maxwell equations. As preparing step first the Green tensor was specified in order to derive three-dimensional input-output relations for the electromagnetic field operators on a plane multilayer structure. Such a general dewscription of the electromagnetic field allows the inclusion both of dispersion and absorption of the media and the
RRR Characteristics for SRF Cavities
Jung, Yoochul; Joung, Mijoung
2015-01-01
The first heavy ion accelerator is being constructed by the rare isotope science project (RISP) launched by the Institute of Basic Science (IBS) in South Korea. Four different types of superconducting cavities were designed, and prototypes were fabricated such as a quarter wave resonator (QWR), a half wave resonator (HWR) and a single spoke resonator (SSR). One of the critical factors determining performances of the superconducting cavities is a residual resistance ratio (RRR). The RRR values essentially represent how much niobium is pure and how fast niobium can transmit heat as well. In general, the RRR degrades during electron beam welding due to the impurity incorporation. Thus it is important to maintain RRR above a certain value at which a niobium cavity shows target performance. In this study, RRR degradation related with electron beam welding conditions, for example, welding power, welding speed, and vacuum level will be discussed.
Lin, Shi-Zeng; Hu, Xiao
2011-04-01
The nano-scale intrinsic Josephson junctions in highly anisotropic cuprate superconductors have potential for generation of terahertz electromagnetic waves. When the thickness of a superconductor sample is much smaller than the wavelength of electromagnetic waves in vacuum, the superconductor renders itself as a cavity. Unlike conventional lasers, the presence of the cavity does not guarantee a coherent emission because of the internal degree of freedom of the superconductivity phase in long junctions. We study the excitation of terahertz wave by solitons in a stack of intrinsic Josephson junctions, especially for relatively short junctions. Coherent emission requires a rectangular configuration of solitons. However such a configuration is unstable against weak fluctuations, contrarily solitons favor a triangular lattice corresponding to an out-phase oscillation of electromagnetic waves. To utilize the cavity, we propose to use an array of stacks of short intrinsic Josephson junctions to generate powerful terahertz electromagnetic waves. The cavity synchronizes the plasma oscillation in different stacks and the emission intensity is predicted to be proportional to the number of stacks squared.
How to Explain the Non-Zero Mass of Electromagnetic Radiation Consisting of Zero-Mass Photons
Gabovich, Alexander M.; Gabovich, Nadezhda A.
2007-01-01
The mass of electromagnetic radiation in a cavity is considered using the correct relativistic approach based on the concept of a scalar mass not dependent on the particle (system) velocity. It is shown that due to the non-additivity of mass in the special theory of relativity the ensemble of chaotically propagating mass-less photons in the cavity…
Protein dynamics: hydration and cavities
K. Heremans
2005-08-01
Full Text Available The temperature-pressure behavior of proteins seems to be unique among the biological macromolecules. Thermodynamic as well as kinetic data show the typical elliptical stability diagram. This may be extended by assuming that the unfolded state gives rise to volume and enthalpy-driven liquid-liquid transitions. A molecular interpretation follows from the temperature and the pressure dependence of the hydration and cavities. We suggest that positron annihilation spectroscopy can provide additional quantitative evidence for the contributions of cavities to the dynamics of proteins. Only mature amyloid fibrils that form from unfolded proteins are very resistant to pressure treatment.
A micropillar for cavity optomechanics
Kuhn, A G; Ducloux, O; Chartier, C; Traon, O Le; Briant, T; Cohadon, P -F; Heidmann, A; Michel, C; Pinard, L; Flaminio, R
2011-01-01
We present a new micromechanical resonator designed for cavity optomechanics. We have used a micropillar geometry to obtain a high-frequency mechanical resonance with a low effective mass and a very high quality factor. We have coated a 60-$\\mu$m diameter low-loss dielectric mirror on top of the pillar and are planning to use this micromirror as part of a high-finesse Fabry-Perot cavity, to laser cool the resonator down to its quantum ground state and to monitor its quantum position fluctuations by quantum-limited optical interferometry.
Electromagnetic fields and life
Presman, A S
1970-01-01
A broad region of the electromagnetic spectrum long assumed to have no influence on living systems under natural conditions has been critically re-examined over the past decade. This spectral region extends from the superhigh radio frequencies, through de creasing frequencies, to and including essentially static electric and magnetic fields. The author of this monograph, A. S. Presman, has reviewed not only the extensive Russian literatur!;"l, but also all most equally comprehensively the non-Russian literature, dealing with biological influences of these fields. Treated also is literature shedding some light on possible theoretical foundations for these phenomena. A substantial, rapidly increasing number of studies in many laboratories and countries has now clearly established bio logical influences which are independent of the theoretically predictable, simple thermal effects. Indeed many of the effects are produced by field strengths very close to those within the natural environment. The author has,...
Solved problems in electromagnetics
Salazar Bloise, Félix; Bayón Rojo, Ana; Gascón Latasa, Francisco
2017-01-01
This book presents the fundamental concepts of electromagnetism through problems with a brief theoretical introduction at the beginning of each chapter. The present book has a strong didactic character. It explains all the mathematical steps and the theoretical concepts connected with the development of the problem. It guides the reader to understand the employed procedures to learn to solve the exercises independently. The exercises are structured in a similar way: The chapters begin with easy problems increasing progressively in the level of difficulty. This book is written for students of physics and engineering in the framework of the new European Plans of Study for Bachelor and Master and also for tutors and lecturers. .
On steady electromagnetic equilibria
Lehnert, B.
1986-12-01
The existence of steady electromagnetic equilibrium states predicted by an extended Lorentz invariant formulation of Maxwell's equations is analyzed. General equilibrium solutions are outlined which lead to integrated field quantities of the system, such as total charge qo, magnetic moment Mo, mass mo and angular momentum so. The quantization of moMo/qo in terms of Bohr magnetons is shown to be equivalent to the proposed resonance condition of circulating self-confined radiation. Exact equilibrium solutions were deduced in two simple cases, thereby leading to a so of the same order as that of the electron, and to a qo one order of magnitude larger than the electronic charge. A variational procedure is suggested in search for states of minimum charge, under the subsidiary quantum conditions on moMo/qo and so, i.e., by varying the profile of the electric space charge distribution.
Focusing of electromagnetic waves
Dhayalan, V.
1996-12-31
The focusing of electromagnetic waves inside a slab has been examined together with two special cases in which the slab is reduced to a single interface or a single medium. To that end the exact solutions for the fields inside a layered medium have been used, given in terms of the outside current source in order to obtain the solutions for the focused electric field inside a slab. Both exact and asymptotic solutions of the problem have been considered, and the validity of the latter has been discussed. The author has developed a numerical algorithm for evaluation of the diffraction integral with special emphasis on reducing the computing time. The numerical techniques in the paper can be readily applied to evaluate similar diffraction integrals occurring e.g. in microstrip antennas. 46 refs.
Electromagnetically Clean Solar Arrays
Stem, Theodore G.; Kenniston, Anthony E.
2008-01-01
The term 'electromagnetically clean solar array' ('EMCSA') refers to a panel that contains a planar array of solar photovoltaic cells and that, in comparison with a functionally equivalent solar-array panel of a type heretofore used on spacecraft, (1) exhibits less electromagnetic interferences to and from other nearby electrical and electronic equipment and (2) can be manufactured at lower cost. The reduction of electromagnetic interferences is effected through a combination of (1) electrically conductive, electrically grounded shielding and (2) reduction of areas of current loops (in order to reduce magnetic moments). The reduction of cost is effected by designing the array to be fabricated as a more nearly unitary structure, using fewer components and fewer process steps. Although EMCSAs were conceived primarily for use on spacecraft they are also potentially advantageous for terrestrial applications in which there are requirements to limit electromagnetic interference. In a conventional solar panel of the type meant to be supplanted by an EMCSA panel, the wiring is normally located on the back side, separated from the cells, thereby giving rise to current loops having significant areas and, consequently, significant magnetic moments. Current-loop geometries are chosen in an effort to balance opposing magnetic moments to limit far-0field magnetic interactions, but the relatively large distances separating current loops makes full cancellation of magnetic fields problematic. The panel is assembled from bare photovoltaic cells by means of multiple sensitive process steps that contribute significantly to cost, especially if electomagnetic cleanliness is desired. The steps include applying a cover glass and electrical-interconnect-cell (CIC) sub-assemble, connecting the CIC subassemblies into strings of series-connected cells, laying down and adhesively bonding the strings onto a panel structure that has been made in a separate multi-step process, and mounting the
Electromagnetic Gyrokinetic Simulations
Wan, W
2003-11-19
A new electromagnetic kinetic electron {delta} particle simulation model has been demonstrated to work well at large values of plasma {beta} times the ion-to-electron mass ratio. The simulation is three-dimensional using toroidal flux-tube geometry and includes electron-ion collisions. The model shows accurate shear Alfven wave damping and microtearing physics. Zonal flows with kinetic electrons are found to be turbulent with the spectrum peaking at zero and having a width in the frequency range of the driving turbulence. This is in contrast with adiabatic electron cases where the zonal flows are near stationary, even though the linear behavior of the zonal flow is not significantly affected by kinetic electrons. zonal fields are found to be very weak, consistent with theoretical predictions for {beta} below the kinetic ballooning limit. Detailed spectral analysis of the turbulence data is presented in the various limits.
Discrete Classical Electromagnetic Fields
De Souza, M M
1997-01-01
The classical electromagnetic field of a spinless point electron is described in a formalism with extended causality by discrete finite transverse point-vector fields with discrete and localized point interactions. These fields are taken as a classical representation of photons, ``classical photons". They are all transversal photons; there are no scalar nor longitudinal photons as these are definitely eliminated by the gauge condition. The angular distribution of emitted photons coincides with the directions of maximum emission in the standard formalism. The Maxwell formalism and its standard field are retrieved by the replacement of these discrete fields by their space-time averages, and in this process scalar and longitudinal photons are necessarily created and added. Divergences and singularities are by-products of this averaging process. This formalism enlighten the meaning and the origin of the non-physical photons, the ones that violate the Lorentz condition in manifestly covariant quantization methods.
Nucleon Electromagnetic Form Factors
Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi
2007-10-01
There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.
Microwave Imaging Using a Disordered Cavity with a Dynamically Tunable Impedance Surface
Sleasman, Timothy; Imani, Mohammadreza F.; Gollub, Jonah N.; Smith, David R.
2016-11-01
We perform microwave imaging using a dynamically reconfigurable aperture based on a tunable disordered cavity. The electrically large cavity is cubic with a spherical deformation and supports a multitude of distinct electromagnetic modes that vary as a function of excitation frequency. With a set of irises introduced into one wall of the cavity, the cavity modes couple to spatially distinct radiative modes that vary as a function of the driving frequency. To increase the diversity of the radiated fields, we replace one of the cavity walls with a variable impedance surface consisting of a set of varactor-populated mushroom structures grouped into pixels. The reflection phase of each pixel is independently changed with application of a voltage bias, effectively altering the surface impedance. We demonstrate high-fidelity imaging and examine the role of the impedance-tunable boundary condition, revealing superior performance in comparison with just frequency-diverse measurements. We also demonstrate single-frequency imaging, which can significantly reduce the demands on the required microwave source. The dynamic cavity imager may find relevance in security screening, through-wall imaging, biomedical diagnostics, and radar applications.
Huang, Yulu; Wang, Haipeng; Rimmer, Robert A.; Wang, Shaoheng; Guo, Jiquan
2016-12-01
Quarter wavelength resonator (QWR) based deflecting cavities with the capability of supporting multiple odd-harmonic modes have been developed for an ultrafast periodic kicker system in the proposed Jefferson Lab Electron Ion Collider (JLEIC, formerly MEIC). Previous work on the kicking pulse synthesis and the transverse beam dynamics tracking simulations show that a flat-top kicking pulse can be generated with minimal emittance growth during injection and circulation of the cooling electron bunches. This flat-top kicking pulse can be obtained when a DC component and 10 harmonic modes with appropriate amplitude and phase are combined together. To support 10 such harmonic modes, four QWR cavities are used with 5, 3, 1, and 1 modes, respectively. In the multiple-mode cavities, several slightly tapered segments of the inner conductor are introduced to tune the higher order deflecting modes to be harmonic, and stub tuners are used to fine tune each frequency to compensate for potential errors. In this paper, we summarize the electromagnetic design of the five-mode cavity, including the geometry optimization to get high transverse shunt impedance, the frequency tuning and sensitivity analysis, and the single loop coupler design for coupling to all of the harmonic modes. In particular we report on the design and fabrication of a half-scale copper prototype of this proof-of-principle five-odd-mode cavity, as well as the rf bench measurements. Finally, we demonstrate mode superposition in this cavity experimentally, which illustrates the kicking pulse generation concept.
A method to measure the frequencies of individual half cells in a dumbbell cavity.
An, Sun; Liping, Zhang; Yazhe, Tang; Li, Ying-min; Cho, Yong-Sub
2008-10-01
Dumbbell fabrication is a midprocess for manufacturing an elliptical superconducting rf cavity. In order to understand how a welding shrinkage affects a dumbbell's frequencies and length, we need to measure the exact frequencies of each individual half cell of a dumbbell. To improve such a calculation precision and to simplify the calculation formulae, based on a two-coupled oscillator model and a cavity perturbation theory, a new formula to calculate the individual half-cell frequencies of a dumbbell or the individual cavity frequencies of a two-cavity coupling system has been developed, and its performance has been confirmed by using a dumbbell simulation. This formula can be applied to any kind of rf cavities with electric, magnetic, or electromagnetic coupling, if a coupling hole between two coupling cavities is small compared to the wavelength. Compared to other calculation formulae, this formula simplifies the calculation process of the individual resonator frequencies of a coupling system considerably, and it can also improve the calculation precision than that of a normal calculation method. Another advantage of this new method is that we do not need to consider a coupling factor between two resonators during a testing for an individual resonator frequency of an oscillator. The developed formula has been successfully used to tune the PEFP dumbbells.
Electromagnetic field patterning or crystal light
Słupski, Piotr; Wymysłowski, Artur; Czarczyński, Wojciech
2016-12-01
Using the orbital angular momentum of light for the development of a vortex interferometer, the underlying physics requires microwave/RF models,1 as well as quantum mechanics for light1, 2 and fluid flow for semiconductor devices.3, 4 The combination of the aforementioned physical models yields simulations and results such as optical lattices,1 or an Inverse Farday effect.5 The latter is explained as the absorption of optical angular momentum, generating extremely high instantenous magnetic fields due to radiation friction. An algorithmic reduction across the computational methods used in microwaves, lasers, quantum optics and holography is performed in order to explain electromagnetic field interactions in a single computational framework. This work presents a computational model for photon-electron interactions, being a simplified gauge theory described using differentials or disturbances (photons) instead of integrals or fields. The model is based on treating the Z-axis variables as a Laplace fluid with spatial harmonics, and the XY plane as Maxwell's equations on boundaries. The result is a unified, coherent, graphical computational method of describing the photon qualitatively, quantitatively and with proportion. The model relies on five variables and is described using two equations, which use emitted power, cavity wavelength, input frequency, phase and time. Phase is treated as a rotated physical dimension under gauge theory of Feynmann's QED. In essence, this model allows the electromagnetic field to be treated with it's specific crystallography. The model itself is described in Python programming language. PACS 42.50.Pq, 31.30.J-, 03.70.+k, 11.10.-z, 67.10.Hk
Electromagnetic properties of neutrinos
Ould-Saada, F. [Zurich Univ. (Switzerland). Inst. fuer Physik
1996-11-01
Electromagnetic properties of neutrinos and their implications are discussed, and the experimental situation summarised. Spin precession in solar magnetic fields presents a solution of the solar neutrino problem. A magnetic moment, {mu}{sub {nu}}, of the order of 10{sup -11} {mu}{sub B} would be needed. In the simplest extension of the standard model, with no-vanishing neutrino masses, dipole moment interactions are allowed through higher order processes. A neutrino mass of {approx_equal}10 eV would give {mu}{sub {nu}}{approx_equal}10{sup -18} {mu}{sub B}, much smaller than the present experimental upper limit of 2x10{sup -10} {mu}{sub B}. Although model-dependent, upper bounds on dipole moments from astrophysics and cosmology are 10 to 100 times more stringent. Any values of {mu}{sub {nu}}, larger than the SM predictions, would then signal the onset of new physics. Among the processes sensitive to the magnetic moment, {nu}e{sup -} scattering presents two advantages: it is a pure weak, theoretically well understood process, and the recoil electron can be easily measured. A hypothetical electromagnetic contribution to the cross-section would dominate at low energies. A low background detector, MUNU, being built at the Bugey nuclear reactor is presented.It is based on a gas TPC, surrounded by a scintillator. The threshold on the electron recoil energy can be set very low, around 500 keV, giving the experiment a good sensitivity to the magnetic moment of the {nu}{sub e}, extending down to 2x10{sup -11} {mu}{sub B}. (author) 15 figs., 5 tabs., 96 refs.
Entanglement swapping between atom and cavity and generation of entangled state of cavity fields
Chen Ai-Xi; Deng Li
2007-01-01
This paper proposes a scheme where entanglement swapping between atom and cavity can be realized. A-type three-level atoms interacting resonantly with cavity field are considered. By detecting atom and cavity field, it realizes entanglement swapping between atom and cavity. It uses the technique of entanglement swapping to generate an entangled state of two cavity fields by measuring on atoms. It discusses the experimental feasibility of the proposed scheme and application of entangled state of cavity fields.
Zhang, Qiaolin; Sun, Hui; Fan, Shuangli; Guo, Hong
2016-12-01
We suggest a multiatom cavity quantum electrodynamics system for the detection of a weak magnetic field, based on Faraday rotation with intracavity electromagnetically induced transparency. Our study demonstrates that the collective coupling between the cavity modes and the atomic ensemble can be used to improve the sensitivity. With single-probe photon input, the sensitivity is inversely proportional to the number of atoms, and a sensitivity of 2.45 nT Hz-1/2 could be attained. With multiphoton measurement, our numerical calculations show that the magnetic field sensitivity can be improved to 105.6 aT Hz-1/2 with realistic experimental conditions.
An Experiment and Detection Scheme for Cavity-Based Light Cold Dark Matter Particle Searches
Masroor H. S. Bukhari
2017-01-01
Full Text Available A resonance detection scheme and some useful ideas for cavity-based searches of light cold dark matter particles (such as axions are presented, as an effort to aid in the on-going endeavors in this direction as well as for future experiments, especially in possibly developing a table-top experiment. The scheme is based on our idea of a resonant detector, incorporating an integrated tunnel diode (TD and GaAs HEMT/HFET (High-Electron Mobility Transistor/Heterogeneous FET transistor amplifier, weakly coupled to a cavity in a strong transverse magnetic field. The TD-amplifier combination is suggested as a sensitive and simple technique to facilitate resonance detection within the cavity while maintaining excellent noise performance, whereas our proposed Halbach magnet array could serve as a low-noise and permanent solution replacing the conventional electromagnets scheme. We present some preliminary test results which demonstrate resonance detection from simulated test signals in a small optimal axion mass range with superior signal-to-noise ratios (SNR. Our suggested design also contains an overview of a simpler on-resonance dc signal read-out scheme replacing the complicated heterodyne read-out. We believe that all these factors and our propositions could possibly improve or at least simplify the resonance detection and read-out in cavity-based DM particle detection searches (and other spectroscopy applications and reduce the complications (and associated costs, in addition to reducing the electromagnetic interference and background.
Vacuum Energy Densities of a Field in a Cavity with a Mobile Boundary
Armata, Federico
2014-01-01
We consider the zero-point field fluctuations, and the related field energy densities, inside a one-dimensional and a three-dimensional cavity with a mobile wall. The mechanical degrees of freedom of the mobile wall are described quantum-mechanically and they are fully included in the overall system dynamics. In this optomechanical system, the field and the wall can interact with each other through the radiation pressure on the wall, given by the photons inside the cavity or even by vacuum fluctuations. We consider two cases: the 1D electromagnetic field and the 3D scalar field, and use the Green's functions formalism, that allows extension of the results obtained for the scalar field to the electromagnetic field. We show that the quantum fluctuations of the position of the cavity's mobile wall significantly affect the field energy density inside the cavity, in particular at the very proximity of the mobile wall. The dependence of this effect from the ultraviolet cut-off frequency, related to the plasma frequ...
Asghari Nejad, A.; Askari, H. R.; Baghshahi, H. R.
2017-03-01
We study electromagnetically induced transparency (EIT), which is affected by cavity optomechanics in different atomic configurations (V and Λ ). The cavity mode is depicted as a probe field, and a classical driving field is applied to the atomic medium as the control laser in each system. Interaction between the cavity mode, atomic media and the oscillating mirror of the cavity can change the susceptibility of the atomic ensemble. Equations of motion demonstrate a system of nonlinear equations for each system. Nonlinearity of equations is a result of interaction between the cavity mode and atomic transitions. The equations are solved via a perturbation method. The results show two different aspects of atom-assisted optomechanics in V-type system: a common transparency window and an amplifying process in a transparency window that does not occur in the Λ configuration, notable as a considerable difference between the proposed systems. It is shown that classical field detuning leads to different changes in the susceptibility of both systems; other values of cavity detuning, except in the resonant case, can guarantee the occurrence of EIT in the system. For the initial value of the cavity field, a negative region appears in absorption spectrum of the V-type atomic ensemble. Meanwhile, the Λ configuration does not show a such process. According to our results, in the appearance of the transparency window, the position of movable mirror changes significantly.
Effective bichromatic potential for ultra-high Q-factor photonic crystal slab cavities
Alpeggiani, Filippo, E-mail: filippo.alpeggiani01@ateneopv.it; Andreani, Lucio Claudio; Gerace, Dario [Department of Physics and CNISM, University of Pavia, Via Bassi 6, 27100 Pavia (Italy)
2015-12-28
We introduce a confinement mechanism in photonic crystal slab cavities, which relies on the superposition of two incommensurate one-dimensional lattices in a line-defect waveguide. It is shown that the resulting photonic profile realizes an effective quasi-periodic bichromatic potential for the electromagnetic field confinement yielding extremely high quality (Q) factor nanocavities, while simultaneously keeping the mode volume close to the diffraction limit. We apply these concepts to pillar- and hole-based photonic crystal slab cavities, respectively, and a Q-factor improvement by over an order of magnitude is shown over existing designs, especially in pillar-based structures. Thanks to the generality and easy adaptation of such confinement mechanism to a broad class of cavity designs and photonic lattices, this work opens interesting routes for applications where enhanced light–matter interaction in photonic crystal structures is required.
A new approach to calculate the transport matrix in RF cavities
Eidelman, Yu.; /Novosibirsk, IYF; Mokhov, N.; Nagaitsev, S.; Solyak, N.; /Fermilab
2011-03-01
A realistic approach to calculate the transport matrix in RF cavities is developed. It is based on joint solution of equations of longitudinal and transverse motion of a charged particle in an electromagnetic field of the linac. This field is a given by distribution (measured or calculated) of the component of the longitudinal electric field on the axis of the linac. New approach is compared with other matrix methods to solve the same problem. The comparison with code ASTRA has been carried out. Complete agreement for tracking results for a TESLA-type cavity is achieved. A corresponding algorithm will be implemented into the MARS15 code. A realistic approach to calculate the transport matrix in RF cavities is developed. Complete agreement for tracking results with existed code ASTRA is achieved. New algorithm will be implemented into MARS15 code.
Realization of collective strong coupling with ion Coulomb crystals in an optical cavity
Herskind, Peter Fønss; Dantan, Aurélien; Marler, Joan
2009-01-01
crystal 16 and an optical field. The obtained coherence times are in the millisecond range and indicate that Coulomb crystals positioned inside optical cavities are promising for realizing a variety of quantum-information devices, including quantum repeaters 12 and quantum memories for light 17, 18......Cavity quantum electrodynamics (CQED) focuses on understanding the interactions between matter and the electromagnetic field in cavities at the quantum level 1, 2 . In the past years, CQED has attracted attention 3, 4, 5, 6, 7, 8, 9 especially owing to its importance for the field of quantum...... information 10 . At present, photons are the best carriers of quantum information between physically separated sites 11, 12 and quantum-information processing using stationary qubits 10 is most promising, with the furthest advances having been made with trapped ions 13, 14, 15 . The implementation of complex...
Vacuum Rabi splitting in a plasmonic cavity at the single quantum emitter limit.
Santhosh, Kotni; Bitton, Ora; Chuntonov, Lev; Haran, Gilad
2016-06-13
The strong interaction of individual quantum emitters with resonant cavities is of fundamental interest for understanding light-matter interactions. Plasmonic cavities hold the promise of attaining the strong coupling regime even under ambient conditions and within subdiffraction volumes. Recent experiments revealed strong coupling between individual plasmonic structures and multiple organic molecules; however, strong coupling at the limit of a single quantum emitter has not been reported so far. Here we demonstrate vacuum Rabi splitting, a manifestation of strong coupling, using silver bowtie plasmonic cavities loaded with semiconductor quantum dots (QDs). A transparency dip is observed in the scattering spectra of individual bowties with one to a few QDs, which are directly counted in their gaps. A coupling rate as high as 120 meV is registered even with a single QD, placing the bowtie-QD constructs close to the strong coupling regime. These observations are verified by polarization-dependent experiments and validated by electromagnetic calculations.
Non-Destructive Testing for Black Heart Cavities in Potatoes with Microwave Radiation
Mohamed, Imran; Gregory, Andrew; Mouthaan, Ralf; Tian, Zhengrong; Andrews, Paul; Mellonie, Andrew
2016-01-01
A first investigation into the use of microwaves for the non-destructive testing for the presence of black heart cavities is presented. Additionally a potato's complex permittivity data between 0.5 GHz to 20 GHz measured using a coaxial sensor and the recipe for a potato phantom are also presented. Electromagnetic finite-difference time-domain simulations of potatoes show that changes to how microwaves propagate through a potato caused by a cavity can produce measurable changes in S21 at the potato's surface of up to 26 dB. Lab-based readings of the change in S21 caused by a phantom cavity submerged in a potato phantom liquid confirms the results of the simulation, albeit at a much reduced magnitude in the order of 0.1 dB.
On cavity modification of stimulated Raman scattering
Matsko, A B; Letargat, R J; Ilchenko, V S; Maleki, L
2003-01-01
We study theoretically stimulated Raman scattering (SRS) in a nonlinear dielectric microcavity and compare SRS thresholds for the cavity and the bulk material it is made of. We show that cavity SRS enhancement results solely from the intensity build up in the cavity and from the differences of the SRS dynamics in free and confined space. There is no significant modification of the Raman gain due to cavity QED effects. We show that the SRS threshold depends significantly on the nature of the dominating cavity decay as well as on the coupling technique with the cavity used for SRS measurements.
Electromagnetic foundations of electrical engineering
Faria, J A Brandao
2008-01-01
The applications of electromagnetic phenomena within electrical engineering have been evolving and progressing at a fast pace. In contrast, the underlying principles have been stable for a long time and are not expected to undergo any changes. It is these electromagnetic field fundamentals that are the subject of discussion in this book with an emphasis on basic principles, concepts and governing laws that apply across the electrical engineering discipline. Electromagnetic Foundations of Electrical Engineering begins with an explanation of Maxwell's equations, from which the fundament
Electromagnetic transients in power cables
da Silva, Filipe Faria
2013-01-01
From the more basic concepts to the most advanced ones where long and laborious simulation models are required, Electromagnetic Transients in Power Cables provides a thorough insight into the study of electromagnetic transients and underground power cables. Explanations and demonstrations of different electromagnetic transient phenomena are provided, from simple lumped-parameter circuits to complex cable-based high voltage networks, as well as instructions on how to model the cables.Supported throughout by illustrations, circuit diagrams and simulation results, each chapter contains exercises,
Biological effects of electromagnetic fields.
Macrì, M. A.; Di Luzio, Sr.; Di Luzio, S.
2002-01-01
Nowadays, concerns about hazards from electromagnetic fields represent an alarming source for human lives in technologically developed countries. We are surrounded by electromagnetic fields everywhere we spend our working hours, rest or recreational activities. The aim of this review is to summarize the biological effects due to these fields arising from power and transmission lines, electrical cable splices, electronic devices inside our homes and work-places, distribution networks and associated devices such as cellular telephones and wireless communication tower, etc. Special care has been reserved to study the biological effects of electromagnetic fields on cell lines of the mammalian immune system about which our research group has been working for several years.
Differential forms on electromagnetic networks
Balasubramanian, N V; Sen Gupta, D P
2013-01-01
Differential Forms on Electromagnetic Networks deals with the use of combinatorial techniques in electrical circuit, machine analysis, and the relationship between circuit quantities and electromagnetic fields. The monograph is also an introduction to the organization of field equations by the methods of differential forms. The book covers topics such as algebraic structural relations in an electric circuit; mesh and node-pair analysis; exterior differential structures; generalized Stoke's theorem and tensor analysis; and Maxwell's electromagnetic equation. Also covered in the book are the app
A primer on electromagnetic fields
Frezza, Fabrizio
2015-01-01
This book is a concise introduction to electromagnetics and electromagnetic fields that covers the aspects of most significance for engineering applications by means of a rigorous, analytical treatment. After an introduction to equations and basic theorems, topics of fundamental theoretical and applicative importance, including plane waves, transmission lines, waveguides, and Green's functions, are discussed in a deliberately general way. Care has been taken to ensure that the text is readily accessible and self-consistent, with conservation of the intermediate steps in the analytical derivations. The book offers the reader a clear, succinct course in basic electromagnetic theory. It will also be a useful lookup tool for students and designers.
ZHAO, Y.
2002-04-19
This note addresses the general concerns for the design of a ferrite cavity. The parameters are specified for the RCMS, for which the frequency ramp is in the range of 1.27 MHz to 6.44 MHz, or a ratio of 1:5.
Droplet based cavities and lasers
Mølhave, Kristian; Kristensen, Anders; Mortensen, Asger
2009-01-01
The self-organized and molecularly smooth surface on liquid microdroplets makes them attractive as optical cavities with very high quality factors. This chapter describes the basic theory of optical modes in spherical droplets. The mechanical properties including vibrational excitation are also d...
1977-01-01
This cavity was installed in the PS ring and proved very efficient in providing a modulation on the PS beam before it is injected into the SPS machine. Moreover it allowed longitudinal instabilities studies at high intensities. Roberto Cappi stands on the left.
"Grinding" cavities in polyurethane foam
Brower, J. R.; Davey, R. E.; Dixon, W. F.; Robb, P. H.; Zebus, P. P.
1980-01-01
Grinding tool installed on conventional milling machine cuts precise cavities in foam blocks. Method is well suited for prototype or midsize production runs and can be adapted to computer control for mass production. Method saves time and materials compared to bonding or hot wire techniques.
2010-01-01
The present invention provides a light source (2) for light circuits on a silicon platform (3). A vertical laser cavity is formed by a gain region (101) arranged between a top mirror (4) and a bottom grating-mirror (12) in a grating region (11) in a silicon layer (10) on a substrate. A waveguide...
Cavity length below chute aerators
2008-01-01
It is proved that air entrainment is one of the efficient measures dealing with cavi-tation control for the release works of hydropower projects. There are many factors to be considered in designing a chute aerator. One of the most important factors concerns the cavity length below the aerator,which has outstanding effects on air entrainment against cavitation damage. It is crucial to determine reasonable emergence angle for the calculation of the cavity length. In the present paper the overall effects of structural and hydraulic parameters on the emergence angle of the flow from the aerator were analyzed. Four improved expressions of the emer-gence angle with weight coefficient were investigated through experimental data of 68 points observed from 12 aerators of 6 hydropower projects,of both model and prototype,on the basis of error theory. A method to calculate the cavity length be-low aerators was suggested,which considers overall effects of the above men-tioned parameters. Comparison between the method in this paper and the other five methods of calculating the cavity length showed that the present method is much more reliable than the existing methods while the mean error of the method is less than others.
Cavity length below chute aerators
WU JianHua; RUAN ShiPing
2008-01-01
It is proved that air entrainment is one of the efficient measures dealing with cavitation control for the release works of hydropower projects. There are many factors to be considered in designing a chute aerator. One of the most important factors concerns the cavity length below the aerator, which has outstanding effects on air entrainment against cavitation damage. It is crucial to determine reasonable emergence angle for the calculation of the cavity length. In the present paper the overall effects of structural and hydraulic parameters on the emergence angle of the flow from the aerator were analyzed. Four improved expressions of the emergence angle with weight coefficient were investigated through experimental data of 68 points observed from 12 aerators of 6 hydropower projects, of both model and prototype, on the basis of error theory. A method to calculate the cavity length below aerators was suggested, which considers overall effects of the above mentioned parameters. Comparison between the method in this paper and the other five methods of calculating the cavity length showed that the present method is much more reliable than the existing methods while the mean error of the method is less than others.
Gallilei covariant quantum mechanics in electromagnetic fields
H. E. Wilhelm
1985-01-01
Full Text Available A formulation of the quantum mechanics of charged particles in time-dependent electromagnetic fields is presented, in which both the Schroedinger equation and wave equations for the electromagnetic potentials are Galilei covariant, it is shown that the Galilean relativity principle leads to the introduction of the electromagnetic substratum in which the matter and electromagnetic waves propagate. The electromagnetic substratum effects are quantitatively significant for quantum mechanics in reference frames, in which the substratum velocity w is in magnitude comparable with the velocity of light c. The electromagnetic substratum velocity w occurs explicitly in the wave equations for the electromagnetic potentials but not in the Schroedinger equation.
Amin, Muhammad Ruhul
2012-08-10
In this paper, a planar metallic nanostructure design, which supports two distinct Fano resonances in its extinction cross-section spectrum under normally incident and linearly polarized electromagnetic field, is proposed. The proposed design involves a circular disk embedding an elongated cavity; shifting and rotating the cavity break the symmetry of the structure with respect to the incident field and induce higher order plasmon modes. As a result, Fano resonances are generated in the visible spectrum due to the destructive interference between the sub-radiant higher order modes and super-radiant the dipolar mode. The Fano resonances can be tuned by varying the cavity\\'s width and the rotation angle. An RLC circuit, which is mathematically equivalent to a mass-spring oscillator, is proposed to model the optical response of the nanostructure design.
Electromagnetic field theories for engineering
Salam, Md Abdus
2014-01-01
A four year Electrical and Electronic engineering curriculum normally contains two modules of electromagnetic field theories during the first two years. However, some curricula do not have enough slots to accommodate the two modules. This book, Electromagnetic Field Theories, is designed for Electrical and Electronic engineering undergraduate students to provide fundamental knowledge of electromagnetic fields and waves in a structured manner. A comprehensive fundamental knowledge of electric and magnetic fields is required to understand the working principles of generators, motors and transformers. This knowledge is also necessary to analyze transmission lines, substations, insulator flashover mechanism, transient phenomena, etc. Recently, academics and researches are working for sending electrical power to a remote area by designing a suitable antenna. In this case, the knowledge of electromagnetic fields is considered as important tool.
Wave propagation in electromagnetic media
Davis, Julian L
1990-01-01
This is the second work of a set of two volumes on the phenomena of wave propagation in nonreacting and reacting media. The first, entitled Wave Propagation in Solids and Fluids (published by Springer-Verlag in 1988), deals with wave phenomena in nonreacting media (solids and fluids). This book is concerned with wave propagation in reacting media-specifically, in electro magnetic materials. Since these volumes were designed to be relatively self contained, we have taken the liberty of adapting some of the pertinent material, especially in the theory of hyperbolic partial differential equations (concerned with electromagnetic wave propagation), variational methods, and Hamilton-Jacobi theory, to the phenomena of electromagnetic waves. The purpose of this volume is similar to that of the first, except that here we are dealing with electromagnetic waves. We attempt to present a clear and systematic account of the mathematical methods of wave phenomena in electromagnetic materials that will be readily accessi...
Earthquake prediction with electromagnetic phenomena
Hayakawa, Masashi, E-mail: hayakawa@hi-seismo-em.jp [Hayakawa Institute of Seismo Electomagnetics, Co. Ltd., University of Electro-Communications (UEC) Incubation Center, 1-5-1 Chofugaoka, Chofu Tokyo, 182-8585 (Japan); Advanced Wireless & Communications Research Center, UEC, Chofu Tokyo (Japan); Earthquake Analysis Laboratory, Information Systems Inc., 4-8-15, Minami-aoyama, Minato-ku, Tokyo, 107-0062 (Japan); Fuji Security Systems. Co. Ltd., Iwato-cho 1, Shinjyuku-ku, Tokyo (Japan)
2016-02-01
Short-term earthquake (EQ) prediction is defined as prospective prediction with the time scale of about one week, which is considered to be one of the most important and urgent topics for the human beings. If this short-term prediction is realized, casualty will be drastically reduced. Unlike the conventional seismic measurement, we proposed the use of electromagnetic phenomena as precursors to EQs in the prediction, and an extensive amount of progress has been achieved in the field of seismo-electromagnetics during the last two decades. This paper deals with the review on this short-term EQ prediction, including the impossibility myth of EQs prediction by seismometers, the reason why we are interested in electromagnetics, the history of seismo-electromagnetics, the ionospheric perturbation as the most promising candidate of EQ prediction, then the future of EQ predictology from two standpoints of a practical science and a pure science, and finally a brief summary.
Electromagnetic identification of dielectric materials
A. F. Yanenko
2010-05-01
Full Text Available The electromagnetic features and parameters of dielectric materials, which are used in light industry and stomatology. The results of measuring are analyzed and the method of authentication is offered.
Electromagnetic Signals from Bacterial DNA
Widom, A; Srivastava, Y N; Sivasubramanian, S
2011-01-01
Chemical reactions can be induced at a distance due to the propagation of electromagnetic signals during intermediate chemical stages. Although is is well known at optical frequencies, e.g. photosynthetic reactions, electromagnetic signals hold true for muck lower frequencies. In E. coli bacteria such electromagnetic signals can be generated by electric transitions between energy levels describing electrons moving around DNA loops. The electromagnetic signals between different bacteria within a community is a "wireless" version of intercellular communication found in bacterial communities connected by "nanowires". The wireless broadcasts can in principle be of both the AM and FM variety due to the magnetic flux periodicity in electron energy spectra in bacterial DNA orbital motions.
Monte Carlo methods for electromagnetics
Sadiku, Matthew NO
2009-01-01
Until now, novices had to painstakingly dig through the literature to discover how to use Monte Carlo techniques for solving electromagnetic problems. Written by one of the foremost researchers in the field, Monte Carlo Methods for Electromagnetics provides a solid understanding of these methods and their applications in electromagnetic computation. Including much of his own work, the author brings together essential information from several different publications.Using a simple, clear writing style, the author begins with a historical background and review of electromagnetic theory. After addressing probability and statistics, he introduces the finite difference method as well as the fixed and floating random walk Monte Carlo methods. The text then applies the Exodus method to Laplace's and Poisson's equations and presents Monte Carlo techniques for handing Neumann problems. It also deals with whole field computation using the Markov chain, applies Monte Carlo methods to time-varying diffusion problems, and ...
Classical electromagnetism in a nutshell
Garg, Anupam
2012-01-01
This graduate-level physics textbook provides a comprehensive treatment of the basic principles and phenomena of classical electromagnetism. While many electromagnetism texts use the subject to teach mathematical methods of physics, here the emphasis is on the physical ideas themselves. Anupam Garg distinguishes between electromagnetism in vacuum and that in material media, stressing that the core physical questions are different for each. In vacuum, the focus is on the fundamental content of electromagnetic laws, symmetries, conservation laws, and the implications for phenomena such as radiation and light. In material media, the focus is on understanding the response of the media to imposed fields, the attendant constitutive relations, and the phenomena encountered in different types of media such as dielectrics, ferromagnets, and conductors. The text includes applications to many topical subjects, such as magnetic levitation, plasmas, laser beams, and synchrotrons.
Conical electromagnetic radiation flux concentrator
Miller, E. R.
1972-01-01
Concentrator provides method of concentrating a beam of electromagnetic radiation into a smaller beam, presenting a higher flux density. Smaller beam may be made larger by sending radiation through the device in the reverse direction.
21 CFR 872.3260 - Cavity varnish.
2010-04-01
... DENTAL DEVICES Prosthetic Devices § 872.3260 Cavity varnish. (a) Identification. Cavity varnish is a... restorative materials. The device is intended to prevent penetration of restorative materials, such as...
Cavity QED experiments with ion Coulomb crystals
Herskind, Peter Fønss; Dantan, Aurélien; Marler, Joan
2009-01-01
Cavity QED experimental results demonstrating collective strong coupling between ensembles of atomic ions cooled into Coulomb crystals and optical cavity fields have been achieved. Collective Zeeman coherence times of milliseconds have furthermore been obtained....
Multiforms, dyadics, and electromagnetic media
Lindell, Ismo V
2015-01-01
This book applies the four-dimensional formalism with an extended toolbox of operation rules, allowing readers to define more general classes of electromagnetic media and to analyze EM waves that can exist in them. End-of-chapter exercises. Formalism allows readers to find novel classes of media. Covers various properties of electromagnetic media in terms of which they can be set in different classes.
Canonical quantization of macroscopic electromagnetism
Philbin, T G, E-mail: tgp3@st-andrews.ac.u [School of Physics and Astronomy, University of St Andrews, North Haugh, St Andrews, Fife KY16 9SS (United Kingdom)
2010-12-15
Application of the standard canonical quantization rules of quantum field theory to macroscopic electromagnetism has encountered obstacles due to material dispersion and absorption. This has led to a phenomenological approach to macroscopic quantum electrodynamics where no canonical formulation is attempted. In this paper macroscopic electromagnetism is canonically quantized. The results apply to any linear, inhomogeneous, magnetodielectric medium with dielectric functions that obey the Kramers-Kronig relations. The prescriptions of the phenomenological approach are derived from the canonical theory.
New Perspective on Classical Electromagnetism
2013-04-01
R. Feynman , R. Leighton, and M. Sands, The Feynman Lectures in Physics vol II (Addison-Wesley, Reading, MA, 1964). 6. W.K.H. Panofsky and M...of the basics of classical electromagnetism is provided by recognizing a previously overlooked law of induction as well as the physical reality of the...classical electromagnetism is provided by recognizing a previously overlooked law of induction as well as the physical reality of the vector potential
Black Hole Thermodynamics and Electromagnetism
Sidharth, B G
2005-01-01
We show a strong parallel between the Hawking, Beckenstein black hole Thermodynamics and electromagnetism: When the gravitational coupling constant transform into the electromagnetic coupling constant, the Schwarzchild radius, the Beckenstein temperature, the Beckenstein decay time and the Planck mass transform to respectively the Compton wavelength, the Hagedorn temperature, the Compton time and a typical elementary particle mass. The reasons underlying this parallalism are then discussed in detail.
Canonical quantization of macroscopic electromagnetism
Philbin, T G
2010-01-01
Application of the standard canonical quantization rules of quantum field theory to macroscopic electromagnetism has encountered obstacles due to material dispersion and absorption. This has led to a phenomenological approach to macroscopic quantum electrodynamics where no canonical formulation is attempted. In this paper macroscopic electromagnetism is canonically quantized. The results apply to any linear, inhomogeneous, magnetoelectric medium with dielectric functions that obey the Kramers-Kronig relations. The prescriptions of the phenomenological approach are derived from the canonical theory.
Advanced Model of Electromagnetic Launcher
Karel Leubner
2015-01-01
Full Text Available An advanced 2D model of electromagnetic launcher is presented respecting the influence of eddy currents induced in the accelerated ferromagnetic body. The time evolution of electromagnetic field in the system, corresponding forces acting on the projectile and time evolutions of its velocity and current in the field circuit are solved numerically using own application Agros2d. The results are then processed and evaluated in Wolfram Mathematica. The methodology is illustrated with an example whose results are discussed.
XU Qing; HU Xiang-Ming
2011-01-01
In an electromagnetically induced transparency system,the atoms have long-lived coherence compared to the cavity lifetime and interact nonadiabatically with the laser fields.We show that the high frequency fluctuations of both the intensities and the intensity difference can be squeezed below the shot noise limit due to the nonadiabatic effects.This noise squeezing can be used to enhance the precision in the short time measurements based on the intensities or the intensity difference.
Radiation and propagation of electromagnetic waves
Tyras, George; Declaris, Nicholas
1969-01-01
Radiation and Propagation of Electromagnetic Waves serves as a text in electrical engineering or electrophysics. The book discusses the electromagnetic theory; plane electromagnetic waves in homogenous isotropic and anisotropic media; and plane electromagnetic waves in inhomogenous stratified media. The text also describes the spectral representation of elementary electromagnetic sources; the field of a dipole in a stratified medium; and radiation in anisotropic plasma. The properties and the procedures of Green's function method of solution, axial currents, as well as cylindrical boundaries a
General Geometry and Geometry of Electromagnetism
Shahverdiyev, Shervgi S.
2002-01-01
It is shown that Electromagnetism creates geometry different from Riemannian geometry. General geometry including Riemannian geometry as a special case is constructed. It is proven that the most simplest special case of General Geometry is geometry underlying Electromagnetism. Action for electromagnetic field and Maxwell equations are derived from curvature function of geometry underlying Electromagnetism. And it is shown that equation of motion for a particle interacting with electromagnetic...
Cavity QED experiments with ion Coulomb crystals
Herskind, Peter Fønss; Dantan, Aurélien; Marler, Joan
2009-01-01
Cavity QED experimental results demonstrating collective strong coupling between ensembles of atomic ions cooled into Coulomb crystals and optical cavity fields have been achieved. Collective Zeeman coherence times of milliseconds have furthermore been obtained.......Cavity QED experimental results demonstrating collective strong coupling between ensembles of atomic ions cooled into Coulomb crystals and optical cavity fields have been achieved. Collective Zeeman coherence times of milliseconds have furthermore been obtained....
Prototype storage cavity for LEP accelerating RF
1980-01-01
The principle of an RF storage cavity was demonstrated with this prototype, working at 500 MHz. Ian Wilso seems to hold it in his hands. The storage cavities had 4 portholes, 1 each for: RF feed; tuning; connection to the accelerating cavity; vacuum pump. The final storage cavities were larger, to suit the lower LEP accelerating frequency of 352.2 MHz. See also 8002294, 8006510X, 8109346, 8407619X, and Annual Report 1980, p.115.
Theory and technology for superconducting cavities
Lengeler, Herbert
1993-01-01
The course will address Physicist and Engineers who are newcomers in the field of accelerators and accelerating cavities. The elements of RF-Superconductivity will be presented with special relevance to accelerating cavities. The present ststus of achievable accelerating fields and RF losses will be given and their link to the special technologies for cavity fabrication and surface treatments will be stressed. Cavity auxiliaries like main couplers, higher order mode couplers and frequency tuners will be described.
Electromagnetic Nanoscale Metrology Based on Entropy Production and Fluctuations
James Baker-Jarvis
2008-10-01
Full Text Available The goal in this paper is to show how many high-frequency electromagnetic metrology areas can be understood and formulated in terms of entropy evolution, production, and fluctuations. This may be important in nanotechnology where an understanding of fluctuations of thermal and electromagnetic energy and the effects of nonequilibrium are particularly important. The approach used here is based on a new derivation of an entropy evolution equation using an exact Liouville-based statistical-mechanical theory rooted in the Robertson-Zwanzig-Mori formulations. The analysis begins by developing an exact equation for entropy rate in terms of time correlations of the microscopic entropy rate. This equation is an exact fluctuation-dissipation relationship. We then define the entropy and its production for electromagnetic driving, both in the time and frequency domains, and apply this to study dielectric and magnetic material measurements, magnetic relaxation, cavity resonance, noise, measuring BoltzmannÃ¢Â€Â™s constant, and power measurements.
ZHOU Shu-cai
2007-08-01
Full Text Available An investigation on the influence of low frequency rotary electromagnetic stirring on solidification structure of austenitic stainless steel in horizontal continuous casting was experimentally conducted and carried out on an industrial trial basis. The results show that application of appropriate electromagnetic stirring parameters can obviously improve the macrostructure of austenitic stainless steel, in which both columnar and equiaxed grains can be greatly refined and shrinkage porosity or cavity zone along centerline can be remarkably decreased due to eliminating intracrystalline and enlarging equiaxed grains zone. The industrial trials verify that the electromagnetic stirring intensity of austenitic stainless steel should be higher than that of plain carbon steel. Electromagnetic stirring has somewhat affected the macrostructure of austenitic stainless steel even if the magnetic flux density of the electromagnetic stirring reaches 90 mT (amplitude reaches 141 mT in average at frequency f=3-4Hz, which provides a reference for the optimization of design and process parameters when applying the rotary electromagnetic stirrer.
无
2007-01-01
An investigation on the influence of low frequency rotary electromagnetic stirring on solidification structure of austenitic stainless steel in horizontal continuous casting was experimentally conducted and carried out on an industrial trial basis. The results show that application of appropriate electromagnetic stirring parameters can obviously improve the macrostructure of austenitic stainless steel, in which both columnar and equiaxed grains can be greatly refined and shrinkage porosity or cavity zone along centerline can be remarkably decreased due to eliminating intracrystalline and enlarging equiaxed grains zone. The industrial trials verify that the electromagnetic stirring intensity of austenitic stainless steel should be higher than that of plain carbon steel. Electromagnetic stirring has somewhat affected the macrostructure of austenitic stainless steel even if the magnetic flux density of the electromagnetic stirring reaches 90 mT (amplitude reaches 141 mT ) in average at frequency f=3-4Hz, which provides a reference for the optimization of design and process parameters when applying the rotary electromagnetic stirrer
Macroscopic quantum electrodynamics of high-Q cavities
Khanbekyan, Mikayel
2009-10-27
In this thesis macroscopic quantum electrodynamics in linear media was applied in order to develop an universally valid quantum theory for the description of the interaction of the electromagnetic field with atomic sources in high-Q cavities. In this theory a complete description of the characteristics of the emitted radiation is given. The theory allows to show the limits of the applicability of the usually applied theory. In order to establish an as possible generally valid theory first the atom-field interaction was studied in the framework of macroscopic quantum electrodynamics in dispersive and absorptive media. In order to describe the electromagnetic field from Maxwell's equations was started, whereby the noise-current densities, which are connected with the absorption of the medium, were included. The solution of these equations expresses the electromagnetic field variables by the noise-current densities by means of Green's tensor of the macroscopic Maxwell equations. The explicit quantization is performed by means of the noise-current densities, whereby a diagonal Hamiltonian is introduced, which then guarantees the time development according to Maxwell's equation and the fulfillment of the fundamental simultaneous commutation relations of the field variables. In the case of the interaction of the medium-supported field with atoms the Hamiltonian must be extended by atom-field interactions energies, whereby the canonical coupling schemes of the minimal or multipolar coupling can be used. The dieelectric properties of the material bodies as well as their shape are coded in the Green tensor of the macroscopic Maxwell equations. As preparing step first the Green tensor was specified in order to derive three-dimensional input-output relations for the electromagnetic field operators on a plane multilayer structure. Such a general dewscription of the electromagnetic field allows the inclusion both of dispersion and absorption of the media and the
SOLAR NANTENNA ELECTROMAGNETIC COLLECTORS
Steven D. Novack; Dale K. Kotter; Dennis Slafer; Patrick Pinhero
2008-08-01
This research explores a new efficient approach for producing electricity from the abundant energy of the sun. A nanoantenna electromagnetic collector (NEC) has been designed, prototyped, and tested. Proof of concept has been validated. The device targets mid-infrared wavelengths where conventional photovoltaic (PV) solar cells do not respond but is abundant in solar energy. The initial concept of designing NEC antennas was based on scaling of radio frequency antenna theory. This approach has proven unsuccessful by many due to not fully understanding and accounting for the optical behavior of materials in the THz region. Also until recent years the nanofabrication methods were not available to fabricate the optical antenna elements. We have addressed and overcome both technology barriers. Several factors were critical in successful implementation of NEC including: 1) frequency-dependent modeling of antenna elements, 2) selection of materials with proper THz properties and 3) novel manufacturing methods that enable economical large-scale manufacturing. The work represents an important step toward the ultimate realization of a low-cost device that will collect as well as convert this radiation into electricity, which will lead to a wide spectrum, high conversion efficiency, and low cost solution to complement conventional PVs.
The CPLEAR Electromagnetic Calorimeter
Adler, R; Bal, F; Behnke, O; Bloch, P; Damianoglou, D; Dechelette, Paul; Dröge, M; Eckart, B; Felder, C; Fetscher, W; Fidecaro, Maria; Garreta, D; Gerber, H J; Gumplinger, P; Guyon, D; Johner, H U; Löfstedt, B; Kern, J; Kokkas, P; Krause, H; Mall, U; Marin, C P; Nanni, F; Pagels, B; Pavlopoulos, P; Petit, P; Polivka, G; Rheme, C; Ruf, T; Santoni, C; Schaller, L A; Schopper, A; Tauscher, Ludwig; Tschopp, H; Weber, P; Wendler, H; Witzig, C; Wolter, M
1997-01-01
A large-acceptance lead/gas sampling electromagnetic calorimeter (ECAL) was constructed for the CPLEAR experiment to detect photons from decays of $\\pi^0$s with momentum $p_{\\pi^0} \\le 800$ MeV$/c$. The main purpose of the ECAL is to determine the decay vertex of neutral-kaon decays $\\ko \\rightarrow \\pi^0\\pi^0 \\rightarrow 4 \\gamma$ and $\\ko \\rightarrow \\pi^0\\pi^0\\pi^0 \\rightarrow 6 \\gamma$. This requires a position-sensitive photon detector with high spatial granularity in $r$-, $\\varphi$-, and $z$-coordinates. The ECAL --- a barrel without end-caps located inside a magnetic field of 0.44 T --- consists of 18 identical concentric layers. Each layer of $1/3$ radiation length (X${_0}$) contains a converter plate followed by small cross-section high-gain tubes of 2640 mm active length which are sandwiched by passive pick-up strip plates. The ECAL, with a total of $6$ X${_0}$, has an energy resolution of $\\sigma (E)/E \\approx 13\\% / \\sqrt{E(\\mathrm{GeV})}$ and a position resolution of 4.5 mm for the shower foot. ...
Introduction to engineering electromagnetics
Lee, Yeon Ho [Sungkyunkwan Univ., Kyongkido (Korea, Republic of). School of Information and Communication Engineering
2013-11-01
This book provides students with the missing link that can help them master the basic principles of electromagnetics. The concept of vector fields is introduced by starting with clear definitions of position, distance, and base vectors. The symmetries of typical configurations are discussed in detail, including cylindrical, spherical, translational, and two-fold rotational symmetries. To avoid serious confusion between symbols with two indices, the text adopts a new notation: a letter with subscript 1-2 for the work done in moving a unit charge from point 2 to point 1, in which the subscript 1-2 mimics the difference in potentials, while the hyphen implies a sense of backward direction, from 2 to 1. This book includes 300 figures in which real data are drawn to scale. Many figures provide a three-dimensional view. Each subsection includes a number of examples that are solved by examining rigorous approaches in steps. Each subsection ends with straightforward exercises and answers through which students can check if they correctly understood the concepts. A total 350 of examples and exercises are provided. At the end of each section, review questions are inserted to point out key concepts and relations discussed in the section. They are given with hints referring to the related equations and figures. The book contains a total of 280 end-of-chapter problems.
Electromagnetism of Bacterial Growth
Ainiwaer, Ailiyasi
2011-10-01
There has been increasing concern from the public about personal health due to the significant rise in the daily use of electrical devices such as cell phones, radios, computers, GPS, video games and television. All of these devices create electromagnetic (EM) fields, which are simply magnetic and electric fields surrounding the appliances that simultaneously affect the human bio-system. Although these can affect the human system, obstacles can easily shield or weaken the electrical fields; however, magnetic fields cannot be weakened and can pass through walls, human bodies and most other objects. The present study was conducted to examine the possible effects of bacteria when exposed to magnetic fields. The results indicate that a strong causal relationship is not clear, since different magnetic fields affect the bacteria differently, with some causing an increase in bacterial cells, and others causing a decrease in the same cells. This phenomenon has yet to be explained, but the current study attempts to offer a mathematical explanation for this occurrence. The researchers added cultures to the magnetic fields to examine any effects to ion transportation. Researchers discovered ions such as potassium and sodium are affected by the magnetic field. A formula is presented in the analysis section to explain this effect.
Nucleon Electromagnetic Form Factors
Kees de Jager
2004-08-01
Although nucleons account for nearly all the visible mass in the universe, they have a complicated structure that is still incompletely understood. The first indication that nucleons have an internal structure, was the measurement of the proton magnetic moment by Frisch and Stern (1933) which revealed a large deviation from the value expected for a point-like Dirac particle. The investigation of the spatial structure of the nucleon, resulting in the first quantitative measurement of the proton charge radius, was initiated by the HEPL (Stanford) experiments in the 1950s, for which Hofstadter was awarded the 1961 Nobel prize. The first indication of a non-zero neutron charge distribution was obtained by scattering thermal neutrons off atomic electrons. The recent revival of its experimental study through the operational implementation of novel instrumentation has instigated a strong theoretical interest. Nucleon electro-magnetic form factors (EMFFs) are optimally studied through the exchange of a virtual photon, in elastic electron-nucleon scattering. The momentum transferred to the nucleon by the virtual photon can be selected to probe different scales of the nucleon, from integral properties such as the charge radius to scaling properties of its internal constituents. Polarization instrumentation, polarized beams and targets, and the measurement of the polarization of the recoiling nucleon have been essential in the accurate separation of the charge and magnetic form factors and in studies of the elusive neutron charge form factor.
ELECTROMAGNET CALORIMETER (ECAL)
R. Rusack
Installation is under way of the last piece of the electromagnetic calorimeter. This is the preshower (ES) that sits in front of the two endcap calorimeters. The construction of the ES was completed in December and went through a detailed set of tests in December and January. The two preshower detectors have a total of 4300 silicon sensors with 137,000 strips. After final assembly and system testing in January, only two of the strips were found to be defective. Once CMS was fully opened a new support structure (‘Gazprom’) was put into place underneath the beam pipe, to support the Surkov platform, on which the preshower installation takes place. In the early hours of 26th February the first two Dees, which form the ‘ES+’ endcap, were transported to P5 , a journey that took two and a half hours. The Dees, still inside environmental protection boxes, were then lowered underground and moved to the ‘+’ end of CMS. Installation start...
Digital Cavities and Their Potential Applications
Karki, Khadga; Widom, Julia R; Marcus, Andrew H; Pullerits, Tonu
2013-01-01
The concept of a digital cavity is presented. The functionality of a tunable radio-frequency/microwave cavity with unrestricted Q-factor is implemented. The theoretical aspects of the cavity and its potential applications in high resolution spectroscopy and synchronization of clocks together with examples in signal processing and data acquisition are discussed.
Diagram of a LEP superconducting cavity
1991-01-01
This diagram gives a schematic representation of the superconducting radio-frequency cavities at LEP. Liquid helium is used to cool the cavity to 4.5 degrees above absolute zero so that very high electric fields can be produced, increasing the operating energy of the accelerator. Superconducting cavities were used only in the LEP-2 phase of the accelerator, from 1996 to 2000.
Power coupler for the ILC crab cavity
Burt, G.; Dexter, A.; Jenkins, R.; /Lancaster U.; Beard, C.; Goudket, P.; McIntosh, P.A.; /Daresbury; Bellantoni, Leo; /Fermilab
2007-06-01
The ILC crab cavity will require the design of an appropriate power coupler. The beam-loading in dipole mode cavities is considerably more variable than accelerating cavities, hence simulations have been performed to establish the required external Q. Simulations of a suitable coupler were then performed and were verified using a normal conducting prototype with variable coupler tips.
Richard N. Conner; Daniel Saenz; D. Craig Rudolph; Richard R. Schaefer
2002-01-01
Rates of cavity excavation by Red-cockaded Woodpeckers (Picoides borealis) were examined from 1983 to 1999 on the Angelina National Forest in east Texas. We compared the rare of natural cavity excavation between 1983 and 1990 (before artificial cavities were available) with the rate of cavity excavation between 1992 and 1993, a period when...
Polariton states in circuit QED for electromagnetically induced transparency
Gu, Xiu; Huai, Sai-Nan; Nori, Franco; Liu, Yu-xi
2016-06-01
Electromagnetically induced transparency (EIT) has been extensively studied in various systems. However, it is not easy to observe in superconducting quantum circuits (SQCs) because the Rabi frequency of the strong-controlling field corresponding to EIT is limited by the decay rates of the SQCs. Here, we show that EIT can be achieved by engineering decay rates in a superconducting circuit QED system through a classical driving field on the qubit. Without such a driving field, the dressed states of the system, describing a superconducting qubit coupled to a cavity field, are approximately product states of the cavity and qubit states in the large-detuning regime. However, the driving field can strongly mix these dressed states. These doubly dressed states, here called polariton states, are formed by the driving field and dressed states, and are a mixture of light and matter. The weights of the qubit and cavity field in the polariton states can now be tuned by the driving field, and thus the decay rates of the polariton states can be changed. We choose the three lowest-energy polariton states with a Λ -type transition in such a driven circuit QED system, and demonstrate how EIT and Autler-Townes splitting can be realized in this compound system. We believe that this study will be helpful for EIT experiments using SQCs.
Cavity Voltage Phase Modulation MD
Mastoridis, Themistoklis; Molendijk, John; Timko, Helga; CERN. Geneva. ATS Department
2016-01-01
The LHC RF/LLRF system is currently configured for extremely stable RF voltage to minimize transient beam loading effects. The present scheme cannot be extended beyond nominal beam current since the demanded power would exceed the peak klystron power and lead to saturation. A new scheme has therefore been proposed: for beam currents above nominal (and possibly earlier), the cavity phase modulation by the beam will not be corrected (transient beam loading), but the strong RF feedback and One-Turn Delay feedback will still be active for loop and beam stability in physics. To achieve this, the voltage set point will be adapted for each bunch. The goal of this MD was to test a new algorithm that would adjust the voltage set point to achieve the cavity phase modulation that would minimize klystron forward power.
A micropillar for cavity optomechanics
Kuhn, Aurélien; Neuhaus, Leonhard; Deléglise, Samuel; Briant, Tristan; Cohadon, Pierre-François; Heidmann, Antoine [Laboratoire Kastler Brossel, UPMC-ENS-CNRS, Paris (France); Van Brackel, Emmanuel [Département de Physique, ENS, Paris (France); Chartier, Claude; Ducloux, Olivier; Le Traon, Olivier [Département Mesures Physiques, ONERA, Châtillon (France); Michel, Christophe; Pinard, Laurent; Flaminio, Raffaele [Laboratoire des Matériaux Avancés, IN2P3-CNRS, Lyon (France)
2014-12-04
Demonstrating the quantum ground state of a macroscopic mechanical object is a major experimental challenge in physics, at the origin of the rapid emergence of cavity optomechanics. We have developed a new generation of optomechanical devices, based on a microgram quartz micropillar with a very high mechanical quality factor. The structure is used as end mirror in a Fabry-Perot cavity with a high optical finesse, leading to ultra-sensitive interferometric measurement of the resonator displacement. We expect to reach the ground state of this optomechanical resonator by combining cryogenic cooling in a dilution fridge at 30 mK and radiation-pressure cooling. We have already carried out a quantum-limited measurement of the micropillar thermal noise at low temperature.
Dissipative structures in optomechanical cavities
Ruiz-Rivas, Joaquín; Navarrete-Benlloch, Carlos; Patera, Giuseppe; Roldán, Eugenio; de Valcárcel, Germán J.
2016-03-01
Motivated by the increasing interest in the properties of multimode optomechanical devices, here we study a system in which a driven longitudinal mode of a large-area optical cavity is dispersively coupled to a deformable mechanical element. Two different models naturally appear in such scenario, for which we predict the formation of periodic patterns, localized structures (cavity solitons), and domain walls, among other complex nonlinear phenomena. Further, we propose a realistic design based on intracavity membranes where our models can be studied experimentally. Apart from its relevance to the field of nonlinear optics, the results put forward here are a necessary step towards understanding the quantum properties of optomechanical systems in the multimode regime of both the optical and the mechanical degrees of freedom.
Surface interactions with electromagnetic spectrum relevant to solar thermal propulsion
Bonometti, Joseph Alexander John
1997-11-01
Elements of solar thermal rocket propulsion systems were experimentally examined to quantify the most significant physical parameters related to concentrating and capturing solar energy. A detailed examination of the sun's electromagnetic flux impingement upon a solar concentrator, redirection to a secondary reflector or refractor optic and absorption in an opaque cavity surface are presented. Research performed includes the analysis and design of a unique high temperature solar laboratory at the University of Alabama in Huntsville, its construction and subsequent operation. The entire facility was a prerequisite to conducting this experimental research and is the result of an initial two-year research effort. Four primary elements were experimentally examined and their relationship to the solar heating profile analyzed to optimize it for use in a solar thermal upper stage. The first was the comparison of concentrator types to define the incident energy profile with the conclusion that their type or quality was insignificant to the thermal heating profile in an absorber cavity. Rigid, thin-film and Fresnel concentrators were experimentally assessed. The second element was the evaluation of the absorber geometry's length-to-diameter ratio of a cylindrical cavity and included the addition of a secondary optic. The secondary optic was recognized as a requirement in the solar thermal rocket and could either improve the flux distribution on the cavity wall using a refractor with extractor rod, or hinder it as in using a parabolic reflector. The third was direct measurement of absorber material properties at elevated temperatures. Reflectivity, absorptivity and emissivity were determined for rhenium at 1000 Kelvin. The reflectivity measurements included both diffuse and specular reflection components and sample coupons of rhenium and niobium were shown to decrease in reflectivity when heated to temperatures approaching 1200 degrees Kelvin. The methodology was unique in
Retention proposal in complex cavities.
Pedro Alvarez Rodríguez
2003-12-01
Full Text Available Background: Dental Operatory is the main structure in which Odontology lies. It is not an easy discipline that gives enjoyable results with little effort due to the difficulties that a correct reconstruction of a destroyed dental element offers.The frequency with which pulpar injury occurs while anchoring additional retainers in complex cavities, the technical difficulties the lack of these devices cause and the need to simplify dental procedures lead this study to show the advantages to substitute additional retainers for a retainer surcus. Method: An observational descriptive study was applied to 53 patients(42% of the universe , sample which was selected by means of a simple randomized sample . From a proximal-occlusal cavity, the preparations were extended in a box-like shape towards the bucal or lingual region and the additional retainers were substituted for a surcus which was performed in the gingival wall of the preparation. Calcium Hydroxide of rapid dryness was used as a cavity cover and Policarboxilate cement as a base; then the amalgam restoration was performed. The number of restorations were studied taking into account the patient´s age and the failures due to fractures of amalgam, loss of vitality and periapical changes were assessed taking into consideration the patient´s age and a one- year follow up. Results: Most of the amalgam restorations were performed in patients aged from 35 to 59 years and the relative frequencies due to fractures of amalgam, loss of vitality and periapical changes were very low. Conclusion: The substitution of additional retainers for a retainer surcus in complex cavities of vital molars showed to be advantageous because it guarantees a less degree of pulpar damage and less pulpar damage.
Lim, S C [Faculty of Engineering, Multimedia University, Jalan Multimedia, Cyberjaya, 63100, Selangor Darul Ehsan (Malaysia); Teo, L P [Faculty of Information Technology, Multimedia University, Jalan Multimedia, Cyberjaya, 63100, Selangor Darul Ehsan (Malaysia)
2007-09-21
We derive rigorously explicit formulae of the Casimir free energy at finite temperature for massless scalar field and electromagnetic field confined in a closed rectangular cavity with different boundary conditions by a zeta regularization method. We study both the low and high temperature expansions of the free energy. In each case, we write the free energy as a sum of a polynomial in temperature plus exponentially decay terms. We show that the free energy is always a decreasing function of temperature. In the cases of massless scalar field with the Dirichlet boundary condition and electromagnetic field, the zero temperature Casimir free energy might be positive. In each of these cases, there is a unique transition temperature (as a function of the side lengths of the cavity) where the Casimir energy changes from positive to negative. When the space dimension is equal to two and three, we show graphically the dependence of this transition temperature on the side lengths of the cavity. Finally we also show that we can obtain the results for a non-closed rectangular cavity by letting the size of some directions of a closed cavity go to infinity, and we find that these results agree with the usual integration prescription adopted by other authors.
Optomechanic interactions in phoxonic cavities
Bahram Djafari-Rouhani
2014-12-01
Full Text Available Phoxonic crystals are periodic structures exhibiting simultaneous phononic and photonic band gaps, thus allowing the confinement of both excitations in the same cavity. The phonon-photon interaction can be enhanced due to the overlap of both waves in the cavity. In this paper, we discuss some of our recent theoretical works on the strength of the optomechanic coupling, based on both photoelastic and moving interfaces mechanisms, in different (2D, slabs, strips phoxonic crystals cavities. The cases of two-dimensional infinite and slab structures will enable us to mention the important role of the symmetry and degeneracy of the modes, as well as the role of the materials whose photoelastic constants can be wavelength dependent. Depending on the phonon-photon pair, the photoelastic and moving interface mechanisms can contribute in phase or out-of-phase. Then, the main part of the paper will be devoted to the optomechanic interaction in a corrugated nanobeam waveguide exhibiting dual phononic/photonic band gaps. Such structures can provide photonic modes with very high quality factor, high frequency phononic modes of a few GHz inside a gap and optomechanical coupling rate reaching a few MHz.
Angioleiomyoma of the Nasal Cavity
Arruda, Milena Moreira
2014-01-01
Full Text Available Introduction Vascular leiomyoma of the nasal cavity is an extremely rare tumor that represents less than 1% of all vascular leiomyomas. It is more prevalent in women between the fourth and sixth decades, reaching primarily the inferior nasal turbinates. Objectives Reporting and assisting the systematization of more accurate diagnostic methods in clinical and complementary investigation of vascular leiomyoma in the nasal cavity. Resumed Report We present the case of a 49-year-old woman diagnosed with vascular leiomyoma in the nasal cavity, which manifested mainly with nasal obstruction. During investigation, computer tomography was not diagnostic, the cytologic study was not conclusive, and according to the biopsy, it was a squamous papilloma. Conclusion We suggest that the technical difficulty in obtaining an adequate amount of material for preoperative biopsy, associated with the topography of the lesion in the vestibular nasal region, may have contributed to changing the postoperative diagnosis. Thus, pathologic study of the surgical fragment is the more accurate method for diagnosis.
Angioleiomyoma of the Nasal Cavity
Arruda, Milena Moreira; Monteiro, Daniela Yasbek; Fernandes, Atilio Maximino; Menegatti, Vanessa; Thomazzi, Emerson; Hubner, Ricardo Arthur; Lima, Luiz Guilherme Cernaglia Aureliano de
2014-01-01
Introduction Vascular leiomyoma of the nasal cavity is an extremely rare tumor that represents less than 1% of all vascular leiomyomas. It is more prevalent in women between the fourth and sixth decades, reaching primarily the inferior nasal turbinates. Objectives Reporting and assisting the systematization of more accurate diagnostic methods in clinical and complementary investigation of vascular leiomyoma in the nasal cavity. Resumed Report We present the case of a 49-year-old woman diagnosed with vascular leiomyoma in the nasal cavity, which manifested mainly with nasal obstruction. During investigation, computer tomography was not diagnostic, the cytologic study was not conclusive, and according to the biopsy, it was a squamous papilloma. Conclusion We suggest that the technical difficulty in obtaining an adequate amount of material for preoperative biopsy, associated with the topography of the lesion in the vestibular nasal region, may have contributed to changing the postoperative diagnosis. Thus, pathologic study of the surgical fragment is the more accurate method for diagnosis. PMID:25992133
Optomechanic interactions in phoxonic cavities
Djafari-Rouhani, Bahram; Oudich, Mourad; Pennec, Yan [Institut d’Electronique, de Microélectronique et de Nanotechnologie (IEMN), UMR CNRS 8520, UFR de physique, Université Lille1, Cité Scientifique, 59652, Villeneuve d’Ascq (France); El-Jallal, Said [Institut d’Electronique, de Microélectronique et de Nanotechnologie (IEMN), UMR CNRS 8520, UFR de physique, Université Lille1, Cité Scientifique, 59652, Villeneuve d’Ascq (France); Physique du Rayonnement et de l’Interaction Laser Matière, Faculté des sciences, Université de Moulay Ismail, Meknès (Morocco)
2014-12-15
Phoxonic crystals are periodic structures exhibiting simultaneous phononic and photonic band gaps, thus allowing the confinement of both excitations in the same cavity. The phonon-photon interaction can be enhanced due to the overlap of both waves in the cavity. In this paper, we discuss some of our recent theoretical works on the strength of the optomechanic coupling, based on both photoelastic and moving interfaces mechanisms, in different (2D, slabs, strips) phoxonic crystals cavities. The cases of two-dimensional infinite and slab structures will enable us to mention the important role of the symmetry and degeneracy of the modes, as well as the role of the materials whose photoelastic constants can be wavelength dependent. Depending on the phonon-photon pair, the photoelastic and moving interface mechanisms can contribute in phase or out-of-phase. Then, the main part of the paper will be devoted to the optomechanic interaction in a corrugated nanobeam waveguide exhibiting dual phononic/photonic band gaps. Such structures can provide photonic modes with very high quality factor, high frequency phononic modes of a few GHz inside a gap and optomechanical coupling rate reaching a few MHz.
Simoes, Fernando; Pfaff, Robert; Berthelier, Jean-Jacques; Klenzing, Jeffrey
2012-01-01
Investigation of coupling mechanisms between the troposphere and the ionosphere requires a multidisciplinary approach involving several branches of atmospheric sciences, from meteorology, atmospheric chemistry, and fulminology to aeronomy, plasma physics, and space weather. In this work, we review low frequency electromagnetic wave propagation in the Earth-ionosphere cavity from a troposphere-ionosphere coupling perspective. We discuss electromagnetic wave generation, propagation, and resonance phenomena, considering atmospheric, ionospheric and magnetospheric sources, from lightning and transient luminous events at low altitude to Alfven waves and particle precipitation related to solar and magnetospheric processes. We review in situ ionospheric processes as well as surface and space weather phenomena that drive troposphere-ionosphere dynamics. Effects of aerosols, water vapor distribution, thermodynamic parameters, and cloud charge separation and electrification processes on atmospheric electricity and electromagnetic waves are reviewed. We also briefly revisit ionospheric irregularities such as spread-F and explosive spread-F, sporadic-E, traveling ionospheric disturbances, Trimpi effect, and hiss and plasma turbulence. Regarding the role of the lower boundary of the cavity, we review transient surface phenomena, including seismic activity, earthquakes, volcanic processes and dust electrification. The role of surface and atmospheric gravity waves in ionospheric dynamics is also briefly addressed. We summarize analytical and numerical tools and techniques to model low frequency electromagnetic wave propagation and solving inverse problems and summarize in a final section a few challenging subjects that are important for a better understanding of tropospheric-ionospheric coupling mechanisms.
LHC crab-cavity aspects and strategy
Calaga, R.; Tomas, R.; Zimmermann, F.
2010-05-23
The 3rd LHC Crab Cavity workshop (LHC-CC09) took place at CERN in October 2009. It reviewed the current status and identified a clear strategy towards a future crab-cavity implementation. Following the success of crab cavities in KEK-B and the strong potential for luminosity gain and leveling, CERN will pursue crab crossing for the LHC upgrade. We present a summary and outcome of the variousworkshop sessions which have led to the LHC crab-cavity strategy, covering topics like layout, cavity design, integration, machine protection, and a potential validation test in the SPS.
Vine, Glenn de [Centre for Gravitational Physics, Faculty of Science, The Australian National University, Canberra ACT 0200 (Australia)], E-mail: glenn.devine@jpl.nasa.gov; McClelland, David E.; Gray, Malcolm B. [Centre for Gravitational Physics, Faculty of Science, The Australian National University, Canberra ACT 0200 (Australia)
2008-06-16
We present a new cavity enhanced, continuous wave spectroscopic technique for the detection of weak atomic and molecular transitions. Differential Cavity Mode Spectroscopy (DCMS) measures the difference in absorption between two adjacent cavity longitudinal modes to yield a highly sensitive, yet relatively simple, cavity enhanced spectroscopic technique. In addition this relative absorption measurement is, to first order, independent of both laser frequency noise and cavity acoustic noise. Here we present both a theoretical description of this new technique and an initial experimental demonstration.