A Comparison of the Box Type Two Solar Cookers with Latent Heat Storage

Directory of Open Access Journals (Sweden)

Numan YÜKSEL

2013-04-01

Full Text Available In this study, the use potential of solar cookers storing by latent heat technical of solar energy was experimentally researched and these cookers were compared. For this purpose, the temperatures of the cookers’ phase change material (PCM were continuously measured during the day, both during sun and after sunset, by filling with the phase change material around the solar cooker manufactured. From the measurements, while the temperature of the PCM in the big cooker filled the large amount of PCM is 92,8 °C, the temperature of the PCM in the other cooker is 80,4 °C.However, the better performance is reached by the cooker-1 in which the maximum surface temperature during the day is 111 °C and the heat is preserved to 52 °C until the next morning. Also, the surface temperature in the cooker is reached to the temperature of 85 °C at the end of 1 hour. It is obtained that the utilization rate or efficiency of the solar cooker-1 is % 36,89 and that of the other cooker is %30,10. It is seen that the solar cookers should be designed for the purpose, depending on the amount of PCM and the cooker’s size. It is concluded that the solar cooker designed can be effectively used with the different purposes, such as heating-cooking, on 24 hours a day, an important part of the year without the need for the other heat source

Evaluation of the cooking power in three different solar cookers box-type

International Nuclear Information System (INIS)

Terres, H; Lizardi, A; Chávez, S; López, R; Vaca, M

2017-01-01

In the present work calculations for the cooking power in three different solar cookers are shown. The designs considered for the solar cookers are square, rectangular and octagonal. Agree to the results, a solar cooker with larger area for the solar radiation inlet has the biggest cooking power. The cooking powers obtained for the solar cookers are 4.04 W (0.49 m 2 ), 2.06 W (0.15 m 2 ) and 0.88 W (0.19 m 2 ) which correspond to square, rectangular and octagonal designs respectively. For the evaluation, the standard ASAE S580 JAN03 was considered to evaluate the cooking power in the solar cookers. Following the method established in this standard was possible to calculate the cooking power and evaluate the solar cookers at the same time. This activity except for what has been done in the standard, have not been done in other works. (paper)

Benefits and constraints in the use of solar cooker

International Nuclear Information System (INIS)

Ilyas, S.Z.

2008-01-01

Women in Pakistan have been overlooked during and after the planning anti implementation of household energy projects for decades. The immediate impact of domestic household energy projects falls on the women first. Since women are the ones who deal mostly with energy at the domestic level A sample of 100 women users of solar cookers was selected randomly. Majority of the respondents were in the age group 30-55 years (80%) and possessed solar cooker for more than one year (74%). Nutritional aspects (preserving nutritive value and food flavors) environmental aspects (keeping environment clean) and economical aspects (saving fuel and money) were perceived at most beneficial. Personal benefits (saving of time me and convenience) ranked low under benefit. Situational constraints like no cooking after evening find seasonal use of the cooker were perceived as severe constraints followed by technical constraints (device not being durable) and personal constraints (shifting of device). The paper also highlights the modification desired in the design of the solar cooker. (author)

Performance and potential of community solar cooker in agroindustries

Energy Technology Data Exchange (ETDEWEB)

Nahar, N. M; Sharma, P [Central Arid Zone Research Institute (India)

2000-07-01

Performance and testing of a community solar cooker having absorber area 3.2 m{sup 2} has been described. The cooker is based on hot box principle having a single reflector. The width to length ratio of reflector is four so that azimuthal tracking is not required. Therefore cooker is kept fixed, facing equator. The maximum stagnation temperature inside cooking chamber during summer is 146 Celsius degrees and 136 Celsius degrees in winter. The efficiency of the cooker is 28.4%. The cooker can be used twice a day for about 254 days and once a day for about 67 days in a year. The cooker can be used in cottage industries for Aanwala, ber et cetera for jam and jelly making. The cost of the cooker is only Rs. 18,000.00 (1.0 US $=Rs. 44.00) that can be recovered in less than a year and one can earn about Rs. 10,000.00 per month. [Spanish] Se describe el rendimiento y la prueba de una estufa solar con un absorbedor en una comunidad con un area de 3.2 m{sup 2}. La estufa esta basada en el principio de la caja caliente que tiene un solo reflector. La proporcion del ancho a largo de reflector es de manera que el seguimiento azimutal no se requiere. Por lo que la estufa se mantiene fijo dando frente al ecuador. La maxima temperatura de estancamiento dentro de la camara de cocimiento durante el verano es de 146 grados celsius y de 136 grados celsius en invierno. La eficiencia de la estufa es de 28.4% la estufa puede usarse 2 veces por dia durante alrededor de 254 dias y una vez por dia durante aproximadamente 67 dias en un ano. La estufa puede usarse en industrias queseras y de cerveza, etc., para la manufactura de jamon y gelatina en Anwala. El costo de la estufa es de solamente 18,000 Rs(rupias) (un US dolar = 44.00 rupias) el cual puede ser recuperado en menos de un ano y se pueden ganar aproximadamente 10,000.00 rupias por mes.

Test and analysis of four solar cookers; Analise e teste de quatro fogoes solares

Energy Technology Data Exchange (ETDEWEB)

Pinheiro, Paulo Cesar da Costa [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Mecanica], e-mail: PauloCPinheiro@ufmg.br, e-mail: pinheiro@demec.ufmg.br

2006-07-01

Solar cookers are an alternative to cooking, milk pasteurization and water purification. This paper describes the assemblage and operational data of 4 solar cookers, two greenhouse type and two concentrator type. It is also propose a methodology for solar cookers tests. (author)

Modelling of Box Type Solar Cooker Performance in a Tropical ...

African Journals Online (AJOL)

Thermal performance model of box type solar cooker with loaded water is presented. The model was developed using the method of Funk to estimate cooking power in terms of climatic and design parameters for box type solar cooker in a tropical environment. Coefficients for each term used in the model were determined ...

ENERGY STAR Certified Commercial Steam Cookers

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 1.2 ENERGY STAR Program Requirements for Commercial Steam Cookers that are effective as...

The use of paraffin wax in a new solar cooker with inner and outer reflectors

Directory of Open Access Journals (Sweden)

Arabacigil Bihter

2015-01-01

Full Text Available In this paper, the potential use and effectiveness of paraffin wax in a new solar cooker was experimentally investigated during daylight and late evening hours. For these experiments, a cooker having an inner reflecting surface was designed, constructed by filling paraffin wax and metal shavings. The side- and sub-surface temperatures of the paraffin wax in the cooker are measured in the summer months of June and July. The thermal efficiency of the cooker was tested on different conditions. The results show that the optimum angle of the outer reflector is 30°. Here, the peak temperature of the paraffin wax in the solar cooker was 83.4 °C. The average solar radiation reflected makes a contribution of 9.26% to the temperature of paraffin wax with the outer reflector. The solar cooker with the outer reflector angle of 30° receives also reflected radiation from the inner reflectors. Besides, the heating time is decreased to approximately 1 hour. The designed solar cooker can be effectively used with 30.3% daily thermal efficiency and paraffin wax due to the amount of energy stored.

Design investigation and evaluation of low cost line concentrated solar cooker

Energy Technology Data Exchange (ETDEWEB)

Sarvoththama Jothi, T.J. [SASTRA Deemed Univ., Tirumalaisamudram, Thanjavur (India). School of Mechanical Engineering

2004-07-01

Enormous amount of energy is wasted in the form of heat for the purpose of cooking all around the world. Broad ranges of technologies are required around the world to incorporate the energy required for cooking. We have efficiently designed and developed a device named Line Concentrated Solar Cooker for the purpose of cooking and heating water or even pasteurization of drinking water. It is distinct from other type of cooker that is using the same old technologies. More over this device can be constructed by means of an inexpensive, commonly available material, thus providing a low-cost option suitable for household use in the developing world. This device was mainly designed from the input taken from the houses of four members each at various places. Its design and performance were evaluated at the laboratory including the efficiency tests. A model of such device was developed which gave the maximum efficiency of around 27 %. This Line Concentrated Solar Cooker has been mainly designed to prevent tracking mechanism, which is the main draw back for other concentrated type solar cooker. In order to prevent tracking mechanism, the design has been made in such a manner that the maximum sunrays are impinging on the reflecting surface of the Line Concentrated Solar Cooker all the time. Hence, minimum of at least 35 percent of the area of the Line Concentrated Solar Cooker is exposed to the sunlight at 8:00 AM and maximum of 100 percentage by noon and gradually decreases by evening as the sun sets. This model gave us a good results leading to excellent heating effect from morning to evening. Hence the heating effect gradually increased from morning to maximum at noon. (orig.)

The development impact of solar cookers: A review of solar cooking impact research in South Africa

International Nuclear Information System (INIS)

Wentzel, Marlett; Pouris, Anastassios

2007-01-01

Solar cooking is often considered 'a solution looking for a problem'. Solar cookers have long been presented as an interesting solution to the world's problem of dwindling fuel wood sources and other environmental problems associated with wood fuel demand for cooking. However, recent GTZ field work in South Africa showed different benefits instead: the use of solar cookers resulted in appreciable fuel and time savings as well as increased energy security for households using commercial fuels. These observations are based on field tests in South Africa that started in 1996 to investigate the social acceptability of solar cookers and to facilitate local production and commercialisation of the technology. Impact studies and use rate studies have been carried out by a number of different organisations since the inception of the project and although commercialisation of the technology has not been achieved to its fullest potential, impact studies indicate that solar cookers have a positive development impact on households through fuel-, energy- and time savings. The article aims to summarise the findings of the various studies and present an overview of use rates and impact data. A variety of factors influence solar cooker use rates, which in turn determine impacts. Some factors are related to the user, some to the environment in which the cooker is used and some to the cooker itself. Ultimately, the data shows that on average, only 17% of solar cooker owners do not use their stoves after purchase and that active solar cooker users utilise their stoves on average for 31% of their cooking incidences. Since the majority of solar stove buyers actually use their stoves and obtain real benefits, this suggests that that solar cookers are indeed not a solution looking for a problem but a solution worth promoting

Solar cooker effect test and temperature field simulation of radio telescope subreflector

International Nuclear Information System (INIS)

Chen, Deshen; Wang, Huajie; Qian, Hongliang; Zhang, Gang; Shen, Shizhao

2016-01-01

Highlights: • Solar cooker effect test of a telescope subreflector is conducted for the first time. • The cause and temperature distribution regularities are analyzed contrastively. • Simulation methods are proposed using light beam segmentation and tracking methods. • The validity of simulation methods is evaluated using the test results. - Abstract: The solar cooker effect can cause a local high temperature of the subreflector and can directly affect the working performance of the radio telescope. To study the daily temperature field and solar cooker effect of a subreflector, experimental studies are carried out with a 3-m-diameter radio telescope model for the first time. Initially, the solar temperature distribution rules, especially the solar cooker effect, are summarized according to the field test results under the most unfavorable conditions. Then, a numerical simulation for the solar temperature field of the subreflector is studied by light beam segmentation and tracking methods. Finally, the validity of the simulation methods is evaluated using the test results. The experimental studies prove that the solar cooker effect really exists and should not be overlooked. In addition, simulation methods for the subreflector temperature field proposed in this paper are effective. The research methods and conclusions can provide valuable references for thermal design, monitoring and control of similar high-precision radio telescopes.

Design and measured performances of a plane reflector augmented box-type solar-energy cooker

International Nuclear Information System (INIS)

Ekechukwu, O.V.

2001-06-01

The design philosophy, construction and measured performances of a plane-reflector augmented box-type solar-energy cooker are presented. The experimental solar cooker consists of an aluminum plate absorber painted matt black and a double-glazed lid. The bottom and sides are lagged with fibreglass wool insulator. The reflector consists of a wooden-framed commercially-available specular plane mirror which is sized to form a cover for the box when not in use. Provision is made for four cooking vessels each capable of holding up to 1 kg of water. Results of thermal performance tests show stagnation absorber plate temperatures of 138 deg. C and 119 deg. C for the cooker with and without the plane reflector in place, respectively. Boiling times of 60 minutes (3600 seconds) and 70 minutes (4200 seconds) for 1 kg of water, for the cooker with and without the reflector in place, respectively, were recorded. The solar cooker performance has been rated using the first figure of merit (F 1 ) on the no-load test and the second figure of merit (F 2 ) on the sensible heat tests. Predicted water boiling times using the two figures of merit compared favourable with measured values. The performance of the cooker with the plane reflector in place was improved tremendously compared to that without the reflector in place. (author)

Performance evaluation and solar radiation capture of optimally inclined box type solar cooker with parallelepiped cooking vessel design

International Nuclear Information System (INIS)

Sethi, V.P.; Pal, D.S.; Sumathy, K.

2014-01-01

Highlights: • Optimally inclined solar cooker is presented for efficient cooking. • A new parallelepiped shaped cooking vessel for higher solar radiation capture is presented. • Optimum tilt angles of the boosted mirror are computed for maximization of reflected components. • Solar radiation capture ratios show the better cooking performance of inclined cooker. • Standard performance parameters establish the better cooking performance of inclined cooker. - Abstract: An optimally inclined box type solar cooker with single booster mirror is presented along with design and development of a novel parallelepiped shaped cooking vessel design for efficient cooking especially in winter conditions. The main feature of new parallelepiped shaped design is its longer inclined south wall (facing the sun) and a trapezoidal cavity on the vessel lid for greater heat transfer to the food material. The ends of the vessel towards east and west direction are minimized. The cooking performance parameters of proposed inclined cooker coupled with new vessel design were compared with horizontally placed identical cooker of same material and dimensions coupled with conventional cylindrical vessel design during winter month (January) of the year 2010 at Ludhiana climate (30°N 77°E), India. Results showed that the first and the second figures of merit (F 1 and F 2 ) for inclined cooker were 0.16 and 0.54 as compared to 0.14 and 0.43 for horizontally placed cooker. Time taken to boil the water τ boil and standard cooking power P n was 37% less and 40% more respectively in parallelepiped shaped cooking vessel of inclined cooker as compared to conventional cylindrical vessel of horizontally placed cooker. A mathematical model is developed to compute the total solar radiation availability on the absorber plate of inclined as well as horizontal cooker which establishes the better cooking performance of the inclined cooker due to greater width of sun rays intercepting the absorber

Experimental investigation of novel indirect solar cooker with indoor PCM thermal storage and cooking unit

International Nuclear Information System (INIS)

Hussein, H.M.S.; El-Ghetany, H.H.; Nada, S.A.

2008-01-01

In the present study, a novel indirect solar cooker with outdoor elliptical cross section, wickless heat pipes, flat-plate solar collector and integrated indoor PCM thermal storage and cooking unit is designed, constructed and tested under actual meteorological conditions of Giza, Egypt. Two plane reflectors are used to enhance the insolation falling on the cooker's collector, while magnesium nitrate hexahydrate (T m = 89 deg. C, latent heat of fusion 134 kJ/kg) is used as the PCM inside the indoor cooking unit of the cooker. It is found that the average daily enhancement in the solar radiation incident on the collector surface by the south and north facing reflectors is about 24%. Different experiments have been performed on the solar cooker without load and with different loads at different loading times to study the possibility of benefit from the virtues of the elliptical cross section wickless heat pipes and PCMs in indirect solar cookers to cook food at noon and evening and to keep food warm at night and in early morning. The results indicate that the present solar cooker can be used successfully for cooking different kinds of meals at noon, afternoon and evening times, while it can be used for heating or keeping meals hot at night and early morning

Ultra-light solar cooker; Cuiseur solaire ultra-leger

Energy Technology Data Exchange (ETDEWEB)

Goetz, M.

2006-07-01

The aim of this project was the development of a solar cooker for travellers. The cooker shouldn't weight more than 2 kg including the cooking pot, it should be easy to handle and it should cook for two within an hour. The first project phase was an intense theoretical study of the market, patents, competitors and mirror geometries. The result were two innovating ideas: A 'linear Fresnel geometry' and a 'section of a parabola'. Both geometries allow the cooking pot to be near the ground. In the second phase, prototypes were built and tested. A first series allowed to choose which technology to follow and gave us ideas for the advanced models of the second series. These models (of the 'linear Fresnel' type) are foldable due to a scissor structure, they can slightly change their shape according to the sun's height and the cooking pot has its windshield. We reached the goal of an innovative solar cooker weighting less than our limit. It takes a reasonable time to set up, it is well transportable and its stability to wind is sufficient. The cooking power is a bit lower than planned, but rice, vegetables and even a small bread have been successfully cooked. (author)

Solar Cooker Study under Oman Conditions for Late Evening Cooking Using Stearic Acid and Acetanilide as PCM Materials

Directory of Open Access Journals (Sweden)

Nagaraj Nayak

2016-01-01

Full Text Available Solar energy is an alternative source of nonrenewable energy in Oman. Sultanate of Oman government showed initiation into utilization of solar energy for domestic applications. Conversion of solar radiation into useful heat is the simplest application of solar energy, in which it can be used for late evening cooking. In this context, present work highlighted the design and development of solar cooker for Oman climatic conditions. The current work signifies usage of solar cooker for late evening cooking using stearic acid and acetanilide as phase change materials (PCM. Solar cooker parts are developed in-house and connected to water heating system compounded with evacuated tubes solar collector and storage tank. The circumference of cooker unit is incorporated with spiral stainless steel heat exchanger and annulus area of the pot is filled with PCM material. PCM releases heat at late evening and effective cooking up to 7:30 PM is noticed. The experimental results indicated the cooker efficiency of 30% and collector efficiency of 60–65% during the study. Overall, experiments showed satisfactory performance on the developed cooker.

Solar cooking in Mozambique—an investigation of end-user's needs for the design of solar cookers

International Nuclear Information System (INIS)

Otte, Pia Piroschka

2014-01-01

Sub-Saharan Africa is characterized by insufficient access to modern energy. One solution to this problem could be the use of solar energy to satisfy the current energy demand. However, solar energy technologies have shown limited success up to now. In the literature it is argued that solar cookers are often implemented as a “solution looking for a problem”, without consideration of the end-user needs. This study contributes to this debate by investigating the energy patterns and cooking profiles of public institutions for the design and implementation of solar cookers in the case of Mozambique. Interviews were conducted with 12 health institutions in Maputo and Sofala province in Mozambique. The paper concludes that solar cooking presents one solution to overcome the energy crisis in Sub-Saharan Africa but not the only solution. Solar cookers could improve the current cooking situation if combined with heat storage, back up, or a hybrid system that ensures reliability also during evening hours and rainy days. In general we could see that solar cookers should fulfill a variety of requirements related to cooking habits, schedule of daily routine and performance that are considered to enhance levels of use. - Highlights: • The study investigates energy patterns of public health institutions in Mozambique. • The aim is to find out how a solar cooker should be designed for implementation. • Solar cookers should be reliable and lead to economic savings. • Users are skeptical towards the use of solar cookers during the rainy season. • Solar cookers need to be combined with other energy sources to be successful

Solar cookers in developing countries—What is their key to success?

International Nuclear Information System (INIS)

Otte, Pia Piroschka

2013-01-01

In developing countries households and institutions heavily rely on biomass to satisfy their energy needs. The unsustainable use of biomass is accompanied by several negative health and environmental impacts. As a clean energy source, solar cooking presents one alternative solution. In spite of its multiple benefits; however, solar cookers have experienced little success. Curiously, there has been little discussion about this in academic circles. Most research concerns technical improvements of solar cookers, rather than on the reasons why these cookers are not actually adopted in the field. This paper fills the gap by developing a comprehensive list of variables that influence the adoption of solar cooking: (1) economic, (2) social, (3) cultural, (4) environmental, (5) political and (6) technical. Furthermore, we can see that some solar cooking promoters are able to control for some of the variables (e.g., environmental factors), but not others (e.g. technical, social and cultural factors). The latter can only be captured through a needs assessment of the target group. This sort of assessment is a demanding but necessary step for the successful outcome of a solar cooking project. - Highlights: • The paper elaborates a list of variables influencing the adoption of solar cookers. • The interrelations of the variables are illustrated in a flow chart. • Environmental factors are easiest to control for by solar cooking organizations. • Technical, social and cultural variables can be captured through a needs assessment

Thermal evaluation of a sun tracking solar cooker

Energy Technology Data Exchange (ETDEWEB)

El-Tous, Yousif; Al-Mofleh, Anwar [Department of Electrical Engineering, Faculty of Engineering Technology, Al-Balqa' Applied University, P.O. Box 15008, Amman (Jordan); Badran, Omar. O. [Department of Mechanical Engineering, Faculty of Engineering Technology, Al-Balqa Appllied University, P.O. Box 15008, Amman (Jordan)

2012-07-01

Solar energy is one of many important types of renewable energy. Jordan is of great needs for renewable energy systems applications since it depends totally in generation of its required energy on imported oil. This study is an experimental work of tracking system developed for enhancing the solar heating using solar cooker. An electronic sun tracking device was used for rotating the solar heater with the movement of the sun. A comparison between fixed and sun tracked cooker showed that the use of sun tracking increased the heating temperature by 36% due to the increase in radiation concentration and using internal mirror reflectors. The programming method used for tracking control works efficiently in all weather conditions regardless of the presence of clouds. It can be used as backup control circuit in which relays are the essential control devices.

Determination of Performance Measuring Parameters of an Improved Dual Paraboloid Solar Cooker

Directory of Open Access Journals (Sweden)

Suhail Zaki Farooqui

2017-01-01

Full Text Available An experimental investigation into the performance evaluation of an improved dual reflector foldable paraboloid solar cooker has been reported, along with its energy and exergy analysis. The best attribute of this lightweight and low-cost solar cooker is its high performance coupled with the ease of handling. The cooker utilizes two paraboloid reflectors made out of Mylar-coated fiberglass dishes, each having a diameter of 90 cm and focal length of 105 cm. The total intercepted radiation energy is 1.08 kW under standard test conditions. Stagnation temperatures of up to 330°C and cooking temperatures of up to 290°C have been attained with load. Altogether, 9 experiments have been performed with and without load. Loaded tests have been conducted with water and vegetable oil. Results indicate an average cooking power of 485 W, peak exergy gain of 60.53 W, quality factor of 0.077, and a high product of temperature difference gap at half peak power to peak power of 4364.33 W·K. The maximum exergy output power attained was 70 W, while maximum exergy efficiency was 8–10%. All performance measuring parameters indicate that it is a high performance solar cooker for rural and urban communities and is suitable for all types of oil- and water-based cooking.

Experimental characterization of a solar cooker with thermal energy storage based on solar salt

Science.gov (United States)

Coccia, G.; Di Nicola, G.; Tomassetti, S.; Gabrielli, G.; Chieruzzi, M.; Pierantozzi, M.

2017-11-01

High temperature solar cooking allows to cook food fast and with good efficiency. An unavoidable drawback of this technology is that it requires nearly clear-sky conditions. In addition, evening cooking is difficult to be accomplished, particularly on the winter season during which solar radiation availability is limited to a few hours in the afternoon in most of countries. These restrictions could be overcome using a cooker thermal storage unit (TSU). In this work, a TSU based on solar salt was studied. The unit consists of two metal concentric cylindrical vessels, connected together to form a double-walled vessel. The volume between walls was filled with a certain amount of nitrate based phase change material (solar salt). In order to characterize the TSU, a test bench used to assess solar cooker performance was adopted. Experimental load tests with the TSU were carried out to evaluate the cooker performance. The obtained preliminary results show that the adoption of the solar salt TSU seems to allow both the opportunity of evening cooking and the possibility to better stabilize the cooker temperature when sky conditions are variable.

Performance Test of Parabolic Trough Solar Cooker for Indoor ...

African Journals Online (AJOL)

Bheema

mm diameter copper pipe is the optimum size for the absorber. Maximum temperatures of ... This paper deals with improving and testing performance of a concentrating cooker for indoor cooking with ... bean oil Soya bean oil. Coating material.

Solar cookers with and without thermal storage - A review

International Nuclear Information System (INIS)

Muthusivagami, R.M.; Velraj, R.; Sethumadhavan, R.

2010-01-01

The continuous increase in the level of green house gas emissions and the increase in fuel prices are the main driving forces behind efforts to more effectively utilize various sources of renewable energy. In many parts of the world, direct solar radiation is considered to be one of the most prospective sources of energy. Among the different energy end uses, energy for cooking is one of the basic and dominant end uses in developing countries. Energy requirement for cooking accounts for 36% of total primary energy consumption in India. Hence, there is a critical need for the development of alternative, appropriate, affordable mode of cooking for use in developing countries. However, the large scale utilization of this form of energy is possible only if the effective technology for its storage can be developed with acceptable capital and running costs. Thermal energy storage is essential whenever there is a mismatch between the supply and consumption of energy. Latent heat storage in a phase change material is very attractive because of its high storage density with small temperature swing. The choice of PCM plays an important role in addition to heat transfer mechanism in the PCM. In this present work a review has been made to study all the research and development work carried out in the field of solar cooker in particular the storage type solar cookers. A novel concept of PCM-based storage type solar cooker is also presented which is under experimental investigation. (author)

Thermal performance parameters estimation of hot box type solar cooker by using artificial neural network

Energy Technology Data Exchange (ETDEWEB)

Kurt, Hueseyin; Atik, Kemal; Oezkaymak, Mehmet; Recebli, Ziyaddin [Zonguldak Karaelmas University, Karabuk Technical Education Faculty, 78200 Karabuk (Turkey)

2008-02-15

Work to date has shown that Artificial Neural Network (ANN) has not been used for predicting thermal performance parameters of a solar cooker. The objective of this study is to predict thermal performance parameters such as absorber plate, enclosure air and pot water temperatures of the experimentally investigated box type solar cooker by using the ANN. Data set is obtained from the box type solar cooker which was tested under various experimental conditions. A feed-forward neural network based on back propagation algorithm was developed to predict the thermal performance of solar cooker with and without reflector. Mathematical formulations derived from the ANN model are presented for each predicting temperatures. The experimental data set consists of 126 values. These were divided into two groups, of which the 96 values were used for training/learning of the network and the rest of the data (30 values) for testing/validation of the network performance. The performance of the ANN predictions was evaluated by comparing the prediction results with the experimental results. The results showed a good regression analysis with the correlation coefficients in the range of 0.9950-0.9987 and mean relative errors (MREs) in the range of 3.925-7.040% for the test data set. The regression coefficients indicated that the ANN model can successfully be used for the prediction of the thermal performance parameters of a box type solar cooker with a high degree of accuracy. (author)

First and Second Law Efficiencies in the Cooking Process of Eggplant using a Solar Cooker Box-Type

International Nuclear Information System (INIS)

Terres, H; Chávez, S; Lizardi, A; López, R; Vaca, M; Flores, J; Salazar, A

2015-01-01

In this work an experimental procedure and the determination of first and second law efficiencies for the cooking process of eggplant using a solar cooker box-type are shown. The eggplant was modelled as cylinder. In the experimental process a NI Compact Field Point was used as acquisition data system which allows measure temperatures in simultaneous form. The temperatures evolution was defined using thermocouples located at water, surface and central point of the eggplant. After to measure the evolution temperatures in a solar cooker thermodynamics principles were applied to determine the first and second laws. The results obtained indicates what is the numerical difference between the first and second laws in the cooking process of eggplant. The results allow to understand how the inlet energy that impacts on solar cooker is converted in energy useful in the cooking process of eggplant. This work be used in future designs of solar cookers

First and Second Law Efficiencies in the Cooking Process of Eggplant using a Solar Cooker Box-Type

Science.gov (United States)

Terres, H.; Chávez, S.; Lizardi, A.; López, R.; Vaca, M.; Flores, J.; Salazar, A.

2015-01-01

In this work an experimental procedure and the determination of first and second law efficiencies for the cooking process of eggplant using a solar cooker box-type are shown. The eggplant was modelled as cylinder. In the experimental process a NI Compact Field Point was used as acquisition data system which allows measure temperatures in simultaneous form. The temperatures evolution was defined using thermocouples located at water, surface and central point of the eggplant. After to measure the evolution temperatures in a solar cooker thermodynamics principles were applied to determine the first and second laws. The results obtained indicates what is the numerical difference between the first and second laws in the cooking process of eggplant. The results allow to understand how the inlet energy that impacts on solar cooker is converted in energy useful in the cooking process of eggplant. This work be used in future designs of solar cookers.

Use of solar parabolic cookers (SK-14) in Nepal

Energy Technology Data Exchange (ETDEWEB)

Shrestha, S. [Asia Network for Small Scale Bioresources, Kathmandu (Nepal)

2000-07-01

Solar Cooker is a device that uses only sunlight to cook food and pasteurise water. Solar cooker can be used along with other cooking devices to save cost, fuel and the time spent in gathering fuelwood. Solar cooking enables individual families to do without commercially sold fuel and help save money. In Nepal, supply of energy is one of the major problems for both urban and rural households. Increase in population, high migration, expensive fuel bills, environmental degradation, and unsafe drinking water have resulted in the keen interest from people of Nepal in the use of solar energy. The increasing number of tourists and trekkers are now one of the major sources of income and many people are engaged in running hotels, lodges, and restaurants. This has also increased the fuel demand. This paper highlights the current energy situation of Nepal, the technical details of solar parabolic cooker (SK-14), its uses throughout Nepal, strategies adopted by various organisations for its promotion. A lot of effort have been made by various organisations, educational, governmental and health related institutions in order to introduce solar cooking programs in villages of Nepal. The parameters, which have influenced the adoption of this technology in Nepal are also mentioned. Various awareness programs and the government subsidy program are playing considerable role in dissemination of such technologies. The promotion activities with the objective of mass awareness have long term effect and sustainable rather than instant business. Continued efforts to create awareness, development of models as well as proper promotion and dissemination are required. (au)

WHY ARE SOLAR COOKERS STILL UNPOPULAR AMONG DEVELOPMENT EXPERTS?

Directory of Open Access Journals (Sweden)

PAUL KRÄMER

2010-03-01

Full Text Available The household energy problem in countries of the South remains critical. Solar cookers can contribute to a solution; however, their potential is seldom realized by the academic and political world. By contrast, bio-energy as a replacement for fossil fuels is increasingly popular in Europe. With regard to tropical developing countries, this European enthusiasm implies unrealistic views about the renewability of woody biomass in drylands under conditions of climate change and increasing population pressure. Another reason of error is a too narrow concept of modernization of energy supplies, neglecting affordable cooking energies and focusing nearly exclusively on electricity. Cheap solar cooking appliances with a low thermal output are useful in extreme situations like refugee camps to allow survival of large numbers of individuals or mini-groups. Under normal circumstances, families need appliances which can cope with the volume of staple food needed, which is the number of people times about 1 litre/person/day.

Thermal performance study of a box type solar cooker: evaluation of second figure of merit, F2

International Nuclear Information System (INIS)

Subudh Kumar

2006-01-01

The thermal performance of a box type solar cooker can be evaluated through the determination of two figures of merit-F 1 and F 2 . The F 1 is defined as the ratio of optical efficiency factor (η o ) the overall heat loss coefficient (U L ) and F 2 relates to the effectiveness of heat exchange between cooker interiors and contents of the pots. The values of F 1 and F 2 can be found experimentally from the stagnation (no-load) and load (water) tests respectively. The sensible heating curve (a plot between pot water temperature and time) from the load test is used for determination of F 2 . An accurate determination of F 2 is necessary for making the correct and reliable assessment of solar cooker performance. In the present work, the thermal analysis has been carried out to simulate the sensible heating curves for different loads of water in the commercially available, fibre body double-glazed box type solar cooker (size 0.245 m 2 ) by using the heat balance equation. The comparison between the simulated and experimental sensible heating curves is presented. The close agreement in the results shows that the simulated heating curve can be employed for predicting the thermal performance (or F 2 ) of the solar cooker. The F 2 for different loads of water in the solar cooker have been obtained using the computer simulation, while considering the variable overall heat loss coefficient U L (a function of pot water temperature). The results indicate that F 2 increases linearly up to a load of 1.5 kg. Thereafter, the increase in the value of F 2 decreases gradually with the load

Development of a household solar box cooker | Fumen ...

African Journals Online (AJOL)

About 60 - 80% Nigerians live in the rural areas and rely heavily on firewood as the main household energy source. A solar cooker or solar oven that uses direct sunlight, the cheapest and the most sustainable source of energy could be introduced in rural communities to help reduce the amount of firewood used by rural ...

Pre- and post-natal exposure of children to EMF generated by domestic induction cookers

Science.gov (United States)

Kos, Bor; Valič, Blaž; Miklavčič, Damijan; Kotnik, Tadej; Gajšek, Peter

2011-10-01

Induction cookers are a type of cooking appliance that uses an intermediate-frequency magnetic field to heat the cooking vessel. The magnetic flux density produced by an induction cooker during operation was measured according to the EN 62233 standard, and the measured values were below the limits set in the standard. The measurements were used to validate a numerical model consisting of three vertically displaced coaxial current loops at 35 kHz. The numerical model was then used to compute the electric field (E) and induced current (J) in 26 and 30 weeks pregnant women and 6 and 11 year old children. Both E and J were found to be below the basic restrictions of the 2010 low-frequency and 1998 ICNRIP guidelines. The maximum computed E fields in the whole body were 0.11 and 0.66 V m-1 in the 26 and 30 weeks pregnant women and 0.28 and 2.28 V m-1 in the 6 and 11 year old children (ICNIRP basic restriction 4.25 V m-1). The maximum computed J fields in the whole body were 46 and 42 mA m-2 in the 26 and 30 weeks pregnant women and 27 and 16 mA m-2 in the 6 and 11 year old children (ICNIRP basic restriction 70 mA m-2).

Pre- and post-natal exposure of children to EMF generated by domestic induction cookers

International Nuclear Information System (INIS)

Kos, Bor; Miklavcic, Damijan; Kotnik, Tadej; Valic, Blaz; Gajsek, Peter

2011-01-01

Induction cookers are a type of cooking appliance that uses an intermediate-frequency magnetic field to heat the cooking vessel. The magnetic flux density produced by an induction cooker during operation was measured according to the EN 62233 standard, and the measured values were below the limits set in the standard. The measurements were used to validate a numerical model consisting of three vertically displaced coaxial current loops at 35 kHz. The numerical model was then used to compute the electric field (E) and induced current (J) in 26 and 30 weeks pregnant women and 6 and 11 year old children. Both E and J were found to be below the basic restrictions of the 2010 low-frequency and 1998 ICNRIP guidelines. The maximum computed E fields in the whole body were 0.11 and 0.66 V m -1 in the 26 and 30 weeks pregnant women and 0.28 and 2.28 V m -1 in the 6 and 11 year old children (ICNIRP basic restriction 4.25 V m -1 ). The maximum computed J fields in the whole body were 46 and 42 mA m -2 in the 26 and 30 weeks pregnant women and 27 and 16 mA m -2 in the 6 and 11 year old children (ICNIRP basic restriction 70 mA m -2 ).

Pre- and post-natal exposure of children to EMF generated by domestic induction cookers

Energy Technology Data Exchange (ETDEWEB)

Kos, Bor; Miklavcic, Damijan; Kotnik, Tadej [Laboratory of Biocybernetics, Faculty of Electrical Engineering, University of Ljubljana, Trzaska 25, SI-1000 Ljubljana (Slovenia); Valic, Blaz; Gajsek, Peter, E-mail: bor.kos@fe.uni-lj.si, E-mail: damijan.miklavcic@fe.uni-lj.si, E-mail: tadej.kotnik@fe.uni-lj.si, E-mail: blaz.valic@inis.si, E-mail: p.gajsek@inis.si [Institute of Non-Ionizing Radiation, Pohorskega Bataljona 215, SI-1000 Ljubljana (Slovenia)

2011-10-07

Induction cookers are a type of cooking appliance that uses an intermediate-frequency magnetic field to heat the cooking vessel. The magnetic flux density produced by an induction cooker during operation was measured according to the EN 62233 standard, and the measured values were below the limits set in the standard. The measurements were used to validate a numerical model consisting of three vertically displaced coaxial current loops at 35 kHz. The numerical model was then used to compute the electric field (E) and induced current (J) in 26 and 30 weeks pregnant women and 6 and 11 year old children. Both E and J were found to be below the basic restrictions of the 2010 low-frequency and 1998 ICNRIP guidelines. The maximum computed E fields in the whole body were 0.11 and 0.66 V m{sup -1} in the 26 and 30 weeks pregnant women and 0.28 and 2.28 V m{sup -1} in the 6 and 11 year old children (ICNIRP basic restriction 4.25 V m{sup -1}). The maximum computed J fields in the whole body were 46 and 42 mA m{sup -2} in the 26 and 30 weeks pregnant women and 27 and 16 mA m{sup -2} in the 6 and 11 year old children (ICNIRP basic restriction 70 mA m{sup -2}).

Numerical simulation of the performance and economical study of three cookers: solar, hybrid (solar and natural gas) and a LPG (Liquefied Petroleum Gases) cooker for one typical year in Fortaleza-Brazil; Simulacao numerica da performance e estudo da viabilidade economica de tres tipos de fogoes: solar, hibrido (solar e gas natural) e a GLP (Gas Liquefeito do Petroleo) para um ano em Fortaleza

Energy Technology Data Exchange (ETDEWEB)

Silva, Maria Eugenia Vieira da; Santana, Lana Ludmila Pinheiro [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Lab. de Energia Solar e Gas Natural (LESGN); Schwarzer, Klemens [Universidade de Ciencias Aplicadas de Aachen (Germany). Solar Institute Juelich; Miller, Francisco Mateus [PETROBRAS, Rio de Janeiro, RJ (Brazil); Baratelli Junior, Fernando [PETROBRAS, Rio de Janeiro, RJ (Brazil). Gerencia de Gas e Energia

2004-07-01

Alternative energy sources can represent viable economical solutions for the energy supply problems and also minimize damages to the environment. This research paper presents an economical and technical study of three different types of cookers: a solar cooker, a hybrid cooker and a conventional LPG cooker, through simulation for one typical year in Fortaleza. The solar cooker used in the experiments is composed of two pots, an oven, a tank of storage and 2m{sup 2} of solar collector area. The hybrid cooker has the same structure of the solar one with an additional natural gas burner, and the LPG stove can be easily found in the market. To find the value of the necessary energy to make food in a solar cooker, the amount of solar radiation was measured, as well as the sensible and latent efficiencies of the used stove. In the hybrid, it was considered that the natural gas is used only in the periods of the day when the amount of solar energy is not enough to heat the system up to the desired temperature. The results show an economical and technical comparison of the three different types of cookers. (author)

Design, construction and performance evaluation of aBox type solar cooker with a glazing wiper mechanism

Directory of Open Access Journals (Sweden)

Zeleke Ademe

2018-01-01

Full Text Available This research work describes the performance evaluation of a double-glazed box-type solar oven with three reflectors and with a vapor wiper mechanism fabricated using locally available materials. The box cooker has external box dimensions of 600 mm × 600 mm × 250 mm and pyramidal internal box dimensions of 460 mm × 460 mm top face and 300 mm × 300 mm bottom face with depth of 150 mm. The thermal performance was tested as per the ASAE International Test procedure and Bureau of Indian Standards (BIS for testing the thermal performance of a box-type solar cooker. The obtained test results after employing required calculations were figures of merit F1 = 0.123 Km2/W, F2 = 0.540, the standard cooking power P50 = 36 W and the cumulative efficiency to be 22%, whereas with the application of the wiper mechanism, it was found that F1 = 0.123, F2 = 0.827, the standard cooking power (P50 = 51 W, and the cumulative efficiency to be 31.4%. The standard boiling time of 1.43 kg of water was calculated to be 53.54 and 88.84 minutes for the cooker with and without the application of wiper mechanism respectively. The thermal distribution of the cooker was modeled using interior box geometry as a boundary condition with ANSYS 15.0. The temperature distribution inside the box was simulated and the maximum wall temperature was found to be 139 ℃. This was lower than the experimental results by 22 ℃. The method of modeling and simulation of the cooker with and without a wiper mechanism is similar except for the variation of the transmittance of the glass due to shading of vapor which can be deducted from the cumulative efficiency for the latter case. The results show that using the vapor wiper mechanism increases the cumulative efficiency by 9.4% and reduces the boiling time by 35.3 minutes. Finally, the techno-economic analysis shows that the cooker with a vapor wiper mechanism has a good reliability for outdoor cooking of food and is economically feasible.

Efficient solar energy conversion in a low cost flat-plate solar cooker fabricated for use in rural areas of the south asian countries

International Nuclear Information System (INIS)

Jamil, Y.; Raza, M.; Muhammad, N.

2008-01-01

Solar flat plate cooker has been designed and fabricated for use in the rural areas of the South Asian countries. Indigenous low cost materials have been utilized for the fabrication of the cooker. The manufacturing cost of the cooker is less than US$ 150. The aim of this work is to utilize direct solar energy for cooking purpose. A flat plate absorber made of copper is used to absorb the heat energy from the sun. The maximum recorded plate temperature of the cooker was 110 degree C at an ambient temperature of 37 degree C. At this temperature sufficient steam is produced which is channeled to the cooking region though copper pipes. The cooker is found to be effective for cooking traditional food items like pulses, vegetables, meat, eggs, etc. It may be used as an alternative of fossil fuels in the rural areas of the South Asian countries, particularly by the rural women. (author)

Particle Emissions from Domestic Gas Cookers

DEFF Research Database (Denmark)

Glarborg, Peter; Livbjerg, Hans; Wagner, Ayten Yilmaz

2010-01-01

The authors experimentally studied the formation of submicron particles from a domestic gas cooker in a compartment free from external particle sources. The effects of fuel (methane, natural gas, odorant-free natural gas), primary aeration, flow rate, and fuel sulphur content on particle emissions...... of the emitted particles were found to have a mean value of about 7 nm for partially premixed flames, increasing to ∼10 nm for nonpremixed flames. The quantity of primary air had a strong impact on the particle emissions, showing a minimum at a primary aeration level of 60-65%. Presence of sulphur in small...... quantities may enhance particle formation under some conditions, but results were not conclusive....

The Newnes guide to home electrics

CERN Document Server

Burdett, Geoffrey

2013-01-01

Home Electrics, Second Edition provides a do-it-yourself (DIY) guide to residential electric systems. The book is comprised of 15 chapters that cover the different aspects of home electrics. The topics covered in the text include electrical installation, rewiring, power circuits, electrical hardware, electrical repairs, tools, and safety. The book also discusses a specific area or function of home electronics, such as lighting system, lamps, electric cookers, and outdoor electrical extension. The book will be of great use to individuals interested in learning how to conduct proper home electri

Exergy applied to the heat conduction analysis in glass covers of a solar cooker box-type with internal and external reflectors

International Nuclear Information System (INIS)

Terres, H; Lizardi, A; Chávez, S; López, R; Vaca, M

2017-01-01

In this work, an exergy evaluation to determine the energy availability across to glass covers, place where the solar radiation enters toward a solar cooker box-type is done. Considering the heating process of water, the energy not used is quantified by means of exergy. The results allow identifying the glasses in the cover as the zone where the solar cooker could be improved. The conduction heat transfer losses for the glasses is most big than 75%. Because the values for the conduction heat losses are around 90%, which are very important, this allows to identify the cover glass as the area where improvements could be made in this type of solar cookers. (paper)

From Solar Cookers Towards Viable Solar Cooking Technology

DEFF Research Database (Denmark)

Ahmad, Bashir

1997-01-01

A broader concept of technology encompassing the technical and the societal aspects is introduced. Viability of technology and technological development process from a socio-technical view- point is discussed. Based on the above, the question of securing viability of solar cooking technology...... is taken up. It is discussed that actor- approach can operationally relate the abstract societal factors with those of technical aspects. Some concrete measures regarding application of solar cooker projects are drawn from the discussion: solar cooking projects should a) be based on user and producer...

Multi-criteria evaluation of cooking energy alternatives for promoting parabolic solar cooker in India

Energy Technology Data Exchange (ETDEWEB)

Pohekar, S.D. [Birla Institute of Technology and Science, Pilani (India). CREED; Ramachandran, M. [Birla Institute of Technology and Science, Dubai (United Arab Emirates)

2004-07-01

The policy formulation for cooking energy substitution by renewables is addressed in multi-criteria context. A survey is conducted to know the perceptions of different decision making groups on present dissemination of various cooking energy alternatives in India. Nine cooking energy alternatives are evaluated on 30 different criteria comprising of technical, economic, environmental/social, behavioural and commercial issues. Preference Ranking Organization METHod for Enrichment Evaluation (PROMETHEE), a multi-criteria decision making method of outranking nature is used to rank the alternatives. It is found that liquefied petroleum gas (LPG) stove is the most preferred device, followed by kerosene stove, solar box cooker and parabolic solar cooker (PSC) in that order. A sensitivity analysis is also carried out for identifying potential areas for improvement for PSC. On the basis of results, strategies for promoting wide spread use of PSC are formulated. (author)

Prediction and experimental verification of performance of box type solar cooker - Part I. Cooking vessel with central cylindrical cavity

International Nuclear Information System (INIS)

Reddy, Avala Raji; Rao, A.V. Narasimha

2007-01-01

The performance of conventional box type solar cookers can be improved by better designs of cooking vessels with proper understanding of the heat flow to the material to be cooked. An attempt has been made in this article to arrive at a mathematical model to understand the heat flow process to the cooking vessel and thereby to the food material. The mathematical model considers a double glazed hot box type solar cooker loaded with two different types of vessels, kept either on the floor of the cooker or on lugs. The performance of the cooking vessel with a central cylindrical cavity is compared with that of a conventional cylindrical cooking vessel. It is found from the experiments and modeling that the cooking vessel with a central cylindrical cavity on lugs results in a higher temperature of the thermic fluid than that of a conventional vessel on the floor or on lugs. The average improvement of performance of the vessel with a central cylindrical cavity kept on lugs is found to be 5.9% and 2.4% more than that of a conventional cylindrical vessel on the floor and on lugs, respectively

Prediction and experimental validation of stagnation temperature attained by a solar cooker of hot box type

Energy Technology Data Exchange (ETDEWEB)

Narasimha Rao, A. V; Srikrishna, D. V. N [Warangal (India)

2000-07-01

A hot box type solar cooker, having double glass covers and a plane mirror reflector, is tested for stagnation temperature. A computer code is developed based on the analytical model proposed by Vaishya et. al. The global and beam components of solar radiation measured at Warangal are made use to predict the stagnation temperature of the cooker. The observed values of stagnation temperature at Warangal are compared with those of predicted values. A good agreement of the measured and observed values of the stagnation temperature is observed during the afternoon period. The lag in the observed values during the forenoon may be due to thermal inertia of the cooker. [Spanish] Se probo una estufa solar de tipo caja caliente con cubiertas dobles de vidrio y un espejo reflector plano para medir la temperatura de estancamiento. Se desarrollo un codigo de computacion basado en el modelo analitico propuesto por Vaishya et. al. Los componentes de la radiacion solar globales y de rayo medidos en Warangal se usan para predecir la temperatura de estancamiento de la estufa. Los valores observados de la temperatura de estancamiento en Warangal se comparan con los valores predichos. Se aprecia una buena concidencia de los valores medidos y observados de la temperatura de estancamiento durante el periodo de la tarde. El retraso de los valores observados durante la manana puede ser debido a la inercia termica de la estufa.

Daily heat storage for a concentrating solar cooker; Tages-Hitzespeicher fuer einen konzentrierenden Solarkocher

Energy Technology Data Exchange (ETDEWEB)

Goetz, M.

2002-07-01

This report for the Swiss Federal Office of Energy (SFOE) describes a project that concerned the development and testing of two storage heating elements for automatic parabolic solar cookers. The first variant is made of solid aluminium and stores sensible heat; the second one is filled with tin and uses the latent heat of the solid-liquid phase-change of the tin as well as the storage of sensible heat, too. Various materials for use in heat storage - metals and salts - were examined. Tin was finally chosen for further experiments. The author concludes that the storage units work well, whereby the tin variant was more flexible for changing-weather conditions because of its latent heat storage. Because of their weight, however, the mobile use of the units is restricted. Suggestions for further development are made, including the integration of the units in the bases of solar cookers and the simplification of their construction. The article also reviews the development and application of concentrating-mirror solar cooking systems in India, where large-scale use can be found.

Thermal performance evaluation of a latent heat storage unit for late evening cooking in a solar cooker having three reflectors

Energy Technology Data Exchange (ETDEWEB)

Buddhi, D.; Sharma, A. [Devi Ahilya University, Indore (India). School of Energy and Environmental Studies, Thermal Energy Storage Laboratory; Sharma, S.D. [Mie University, Tsu (Japan). Faculty of Engineering, Department of Architecture

2003-04-01

In this paper, a phase change material (PCM) storage unit for a solar cooker was designed and developed to store energy during sunshine hours. The stored energy was utilised to cook food in the late evening. Commercial grade acetanilide (melting point 118.9 {sup o}C, latent heat of fusion 222 kJ/kg) was used as a latent heat storage material. Evening cooking experiments were conducted with different loads and loading times during the winter season. The experimental results showed that late evening cooking is possible in a solar cooker having three reflectors to enhance the incident solar radiation with the PCM storage unit. (author)

Traumatic brain injury due to pressure cooker explosion in a child: case report

Directory of Open Access Journals (Sweden)

Calderon-Miranda Willem Guillermo

2016-06-01

Full Text Available Traumatic brain injury is a common condition in the emergency services, affecting the pediatric and adult population significantly. Patterns of head injury as well as management principles in children are important differences compared to adults. Traumatic brain injury by Domestic pressure cooker is rare and has not been described in children, which to our knowledge is the first report in the literature of this nature.

Experimental studies on solar parabolic dish cooker with porous medium

International Nuclear Information System (INIS)

Lokeswaran, S.; Eswaramoorthy, M.

2012-01-01

The solar cooking is the alternate method of cooking to reduce consumptions of fossil fuels. An affordable, energy efficient solar cooking technology is much need due to the fossil fuels increasing cost and it is the hottest research topic in all over the world. This paper presents an experimental analysis of the heat transfer enhancement of solar parabolic dish cookers by a porous medium made of scrap material. Using the stagnation temperature test and water boiling test are conducted on the cooking vessel with and without porous medium. Experimental results are compared for both cases in terms of thermal performance, optical efficiency, heat loss factor and cooking power. (authors)

Measurements of intermediate-frequency electric and magnetic fields in households

Energy Technology Data Exchange (ETDEWEB)

Aerts, Sam, E-mail: sam.aerts@intec.ugent.be [Department of Information Technology, Ghent University/iMinds, iGent, Technologiepark-Zwijnaarde 15, B-9052 Ghent (Belgium); Calderon, Carolina [Centre for Radiation, Chemical and Environmental Hazards, Public Health England, Chilton, Didcot, Oxon OX11 0RQ (United Kingdom); Valič, Blaž [Institute of Non-Ionizing Radiation (INIS), Pohorskega bataljona 215, Ljubljana 1000 (Slovenia); Maslanyj, Myron; Addison, Darren; Mee, Terry; Goiceanu, Cristian [Centre for Radiation, Chemical and Environmental Hazards, Public Health England, Chilton, Didcot, Oxon OX11 0RQ (United Kingdom); Verloock, Leen; Van den Bossche, Matthias [Department of Information Technology, Ghent University/iMinds, iGent, Technologiepark-Zwijnaarde 15, B-9052 Ghent (Belgium); Gajšek, Peter [Institute of Non-Ionizing Radiation (INIS), Pohorskega bataljona 215, Ljubljana 1000 (Slovenia); Vermeulen, Roel [Institute for Risk Assessment Sciences, Department of Environmental Epidemiology, Utrecht University, Yalelaan 2, 3508 Utrecht (Netherlands); Röösli, Martin [Swiss Tropical and Public Health Institute (Swiss TPH), Socinstrasse 57, P.O. Box, 4002 Basel (Switzerland); University of Basel, Petersplatz 1, 4003 Basel (Switzerland); Cardis, Elisabeth [Barcelona Institute for Global Health (ISGlobal) and Municipal Institute of Medical Research (IMIM-Hospital del Mar), Doctor Aiguader, 88, 08003 Barcelona (Spain); Martens, Luc; Joseph, Wout [Department of Information Technology, Ghent University/iMinds, iGent, Technologiepark-Zwijnaarde 15, B-9052 Ghent (Belgium)

2017-04-15

Historically, assessment of human exposure to electric and magnetic fields has focused on the extremely-low-frequency (ELF) and radiofrequency (RF) ranges. However, research on the typically emitted fields in the intermediate-frequency (IF) range (300 Hz to 1 MHz) as well as potential effects of IF fields on the human body remains limited, although the range of household appliances with electrical components working in the IF range has grown significantly (e.g., induction cookers and compact fluorescent lighting). In this study, an extensive measurement survey was performed on the levels of electric and magnetic fields in the IF range typically present in residences as well as emitted by a wide range of household appliances under real-life circumstances. Using spot measurements, residential IF field levels were found to be generally low, while the use of certain appliances at close distance (20 cm) may result in a relatively high exposure. Overall, appliance emissions contained either harmonic signals, with fundamental frequencies between 6 kHz and 300 kHz, which were sometimes accompanied by regions in the IF spectrum of rather noisy, elevated field strengths, or much more capricious spectra, dominated by 50 Hz harmonics emanating far in the IF domain. The maximum peak field strengths recorded at 20 cm were 41.5 V/m and 2.7 A/m, both from induction cookers. Finally, none of the appliance emissions in the IF range exceeded the exposure summation rules recommended by the International Commission on Non-Ionizing Radiation Protection guidelines and the International Electrotechnical Commission (IEC 62233) standard at 20 cm and beyond (maximum exposure quotients EQ{sub E} 1.0 and {sub E}Q{sub H} 0.13). - Highlights: • Survey of residential electric and magnetic fields at intermediate frequencies (IF). • IF-EF and -MF emitted by 280 household appliances were characterised. • Strongest emitters were induction cookers, CFLs, LCD-TVs, and microwave ovens. • No

Measurements of intermediate-frequency electric and magnetic fields in households

International Nuclear Information System (INIS)

Aerts, Sam; Calderon, Carolina; Valič, Blaž; Maslanyj, Myron; Addison, Darren; Mee, Terry; Goiceanu, Cristian; Verloock, Leen; Van den Bossche, Matthias; Gajšek, Peter; Vermeulen, Roel; Röösli, Martin; Cardis, Elisabeth; Martens, Luc; Joseph, Wout

2017-01-01

Historically, assessment of human exposure to electric and magnetic fields has focused on the extremely-low-frequency (ELF) and radiofrequency (RF) ranges. However, research on the typically emitted fields in the intermediate-frequency (IF) range (300 Hz to 1 MHz) as well as potential effects of IF fields on the human body remains limited, although the range of household appliances with electrical components working in the IF range has grown significantly (e.g., induction cookers and compact fluorescent lighting). In this study, an extensive measurement survey was performed on the levels of electric and magnetic fields in the IF range typically present in residences as well as emitted by a wide range of household appliances under real-life circumstances. Using spot measurements, residential IF field levels were found to be generally low, while the use of certain appliances at close distance (20 cm) may result in a relatively high exposure. Overall, appliance emissions contained either harmonic signals, with fundamental frequencies between 6 kHz and 300 kHz, which were sometimes accompanied by regions in the IF spectrum of rather noisy, elevated field strengths, or much more capricious spectra, dominated by 50 Hz harmonics emanating far in the IF domain. The maximum peak field strengths recorded at 20 cm were 41.5 V/m and 2.7 A/m, both from induction cookers. Finally, none of the appliance emissions in the IF range exceeded the exposure summation rules recommended by the International Commission on Non-Ionizing Radiation Protection guidelines and the International Electrotechnical Commission (IEC 62233) standard at 20 cm and beyond (maximum exposure quotients EQ E 1.0 and E Q H 0.13). - Highlights: • Survey of residential electric and magnetic fields at intermediate frequencies (IF). • IF-EF and -MF emitted by 280 household appliances were characterised. • Strongest emitters were induction cookers, CFLs, LCD-TVs, and microwave ovens. • No emissions exceeded

Numerical heat transfer studies of PCMs used in a box-type solar cooker

Energy Technology Data Exchange (ETDEWEB)

Chen, C.R.; Sharma, Atul [Department of Mechanical Engineering, Kun Shan University, 949 Da-Wan Road, Yung-Kung City, Tainan Hsien 710 (China); Tyagi, S.K. [Department of Building Services Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon (China); Buddhi, D. [Thermal Energy Storage Laboratory, School of Energy and Environmental Studies, Khandwa Road Campus, Devi Ahilya University, Indore 452017 (India)

2008-05-15

Theoretical investigations on the phase change materials (PCMs) used as the heat storage media for box-type solar cookers have been conducted in this study. The selected PCMs are magnesium nitrate hexahydrate, stearic acid, acetamide, acetanilide and erythritol. For a two-dimensional simulation model based on the enthalpy approach, calculations have been made for the melt fraction with conduction only. Different materials such as glass, stainless steel, tin, aluminum mixed, aluminum and copper are used as the heat exchanger container materials in the numerical calculations. The large value of thermal conductivity of heat exchanger container material did not make a significant contribution on the melt fraction except for at very low thermal conductivities. Based on the theoretical results, stearic acid and acetamide are found to be good compatibility with latent heat storage system. It is also found that the initial temperature of PCM does not have very important effects on the melting time, while the boundary wall temperature plays an important role during the melting and has a strong effect on the melt fraction. The results also show that the effect of thickness of container material on the melt fraction is insignificant. The results obtained in this paper show that in a box-type solar cooker, acetamide and stearic acid should be used as a latent heat storage materials. (author)

Performance and analysis by particle image velocimetry (PIV) of cooker-top burners in Thailand

International Nuclear Information System (INIS)

Makmool, U.; Jugjai, S.; Tia, S.; Vallikul, P.; Fungtammasan, B.

2007-01-01

Cooker-top burners are used extensively in Thailand because of the rapid combustion and high heating-rates created by an impinging flame, which is characteristic of these types of burners. High thermal efficiency with low level of CO emissions is the most important performance criteria for these burners. The wide variation in reported performances of the burners appears to be due to the ad hoc knowledge gained through trial and error of the local manufacturers rather than sound scientific principles. This is extremely undesirable in view of safety, energy conservation and environmental protection. In the present work, a nationwide cooker-top burner performance survey and an implementation of a PIV technique to analyze the burner performance as well as advising local manufacturers were carried out. Experimental data were reported for the base line value of thermal efficiency of all the burners. The thermal performance parameters and dynamic properties of the flow field at a flame impingement area, i.e. velocity magnitude, turbulent intensity, vorticity and strain rate were also reported as a function of burner type, which was categorized into four types based on the configuration of the burner head: radial flow burners, swirling flow burners, vertical flow burners and porous radiant burners

Heat Transfer Convection in The Cooking of Apple Using a Solar Cooker Box-Type

International Nuclear Information System (INIS)

Terres, H; Chávez, S; Lizardi, A; López, R; Vaca, M; Flores, J; Salazar, A

2015-01-01

In this work, experimental results to determine the convection heat transfer coefficient in the cooking process of apple using a solar cooker box-type are presented. Experimental data of temperatures for water, surface and central point of the apple were used. To determine the convection coefficient, the apple was modelled as a sphere. The temperatures evolution was defined using thermocouples located at water, surface and central point in the vegetables. Using heat transfer convection equations in transitory state and the temperatures measured, the Biot number and the convection coefficient were determined

Heat Transfer Convection in The Cooking of Apple Using a Solar Cooker Box-Type

Science.gov (United States)

Terres, H.; Chávez, S.; Lizardi, A.; López, R.; Vaca, M.; Flores, J.; Salazar, A.

2015-01-01

In this work, experimental results to determine the convection heat transfer coefficient in the cooking process of apple using a solar cooker box-type are presented. Experimental data of temperatures for water, surface and central point of the apple were used. To determine the convection coefficient, the apple was modelled as a sphere. The temperatures evolution was defined using thermocouples located at water, surface and central point in the vegetables. Using heat transfer convection equations in transitory state and the temperatures measured, the Biot number and the convection coefficient were determined.

Solar cooker of the portable parabolic type incorporating heat storage based on PCM

International Nuclear Information System (INIS)

Lecuona, Antonio; Nogueira, José-Ignacio; Ventas, Rubén; Rodríguez-Hidalgo, María-del-Carmen; Legrand, Mathieu

2013-01-01

Highlights: ► A portable utensil for commercial paraboloid type solar cookers is proposed. ► It includes heat storage with phase change materials (PCMs). ► The utensil is stored indoors in a thermally insulating box after charging. ► A thermal 1-D model predicts its performance in sunny days. ► The set allows cooking lunch, dinner and next day the breakfast for a family. - Abstract: This paper reviews relevant issues on solar cooking in order to define and evaluate an innovative layout of a portable solar cooker of the standard concentrating parabolic type that incorporates a daily thermal storage utensil. This utensil is formed by two conventional coaxial cylindrical cooking pots, an internal one and a larger external one. The void space between the two coaxial pots is filled with a phase change material (PCM) forming an intermediate jacket. The ensemble is thermally simulated using 1-D finite differences. A lumped elements model with convective heat transfer correlations is used for the internal behavior of the utensil, subjected to external radiation. This numerical model is used to study its transient behavior for the climatic conditions of Madrid, and validated with experimental data. Two options have been checked as possible PCMs: technical grade paraffin and erythritol. The results indicate that cooking the lunch for a family is possible simultaneously with heat storage along the day. Keeping afterwards the utensil inside an insulating box indoors allows cooking the dinner with the retained heat and also the next day breakfast. This expands the applicability of solar cooking and sustains the possibility of all the day around cooking using solar energy with a low inventory cost

Diseño de un plan de mejoramiento en el área comercial de la empresa Electrolux C.A. dedicada a la comercialización de productos de línea blanca y pequeños electrodomésticos a nivel nacional

OpenAIRE

Sarango Zurita, Karina Magdalena; Taipicaña Vergara, Erika Andrea

2013-01-01

Esta investigación se realizó en la Empresa Electrolux C.A., se dedica a la comercialización de electrodomésticos de línea blanca y enseres menores, el cual consiste en el desarrollo de un plan de mejoramiento enfocado en el área comercial, sobre la cual radican los principales problemas. El objetivo principal de este proyecto radica en levantar los procesos y a su vez plantear un mejoramiento en cuanto a costo – tiempo cada una de las actividades desarrolladas en dicha área, proponiendo l...

A feedforward IMC structure for controlling the charging temperature of a TES system of a solar cooker

International Nuclear Information System (INIS)

Mawire, A.; McPherson, M.

2008-01-01

A feedforward internal model control (IMC) structure for controlling and maintaining the outlet charging temperature of a thermal energy storage (TES) system of a solar cooker is presented. The TES system consists of a packed pebble bed in thermal contact with a heat transfer oil contained in a storage tank. An electrical hot plate simulates the collector/concentrator which heats up the oil circulating in a hollow copper spiral coil thus charging the storage. A model for the collector/concentrator system is developed to enable simulation of the feedforward IMC structure. Using a Simulink block model, the simulation results reveal that a feedforward IMC structure performs better than a feedforward structure. The feedforward IMC structure is tested experimentally and the performance of the control structure is acceptable within a few degrees of the set temperatures. Experimental results are also compared with the simulation results. The simulated responses are found to relate closely to the experimental ones and any discrepancies between the two are discussed. Furthermore, the feedforward IMC structure is also compared experimentally with a combined feedforward and PID feedback structure. Results of the comparison indicate that the feedforward IMC structure performs better than the combined feedforward and PID feedback structure. The thermal profile of the storage during the charging experiment with the feedforward IMC structure is also presented and the results obtained from the storage profile indicate that the storage tank is thermally stratified

Investigations of combustion process in combined cooker-boiler fired on solid fuels

Directory of Open Access Journals (Sweden)

Stojiljković Dragoslava D.

2006-01-01

Full Text Available The aim of the investigation was to make some reconstructions on the existing stove used for cooking and baking and to obtain the combined cooker-boiler which will fulfill the demands of European standard EN 12815. Implementation of modern scientific achievements in the field of combustion on stoves and furnaces fired on solid fuels was used. During the investigations four various constructions were made with different fresh air inlet and secondary air supply with the intention to obtain more complete combustion with increased efficiency and reduced CO emission. Three different fuels were used: firewood, coal, and wood briquette. A numerous parameters were measured: fuel weight changes during the combustion process, temperature of inlet and outlet water, flue gas composition (O2, CO, SO2, CO2, NOx, flue gas temperature, ash quantity etc. The result of the investigations is the stove with the efficiency of more than 75% - boiler Class 1 (according EN 12815 and CO emission of about 1% v/v. The results obtained during the measurements were used as parameters for modeling of combustion process. .

Modelización de una micro red fotovoltaica aplicada a equipos de cocción por inducción para el reemplazo de GLP

OpenAIRE

Riofrio Trujillo, Augusto Jonathan

2015-01-01

Due to the increasing use of electricity, cooking food has developed major changes, mainly with respect to fuel use from firewood, coal or fossil fuel derivatives up to the use of electricity. In the case of Ecuador, the government has decided to run a campaign about massive migration from LPG based cookers to induction cookers during the next three years, thanks to the policies of changing the Productive Matrix and also the diversification of the Energy Matrix. This works presents an alte...

Performance Evaluation of Various Phase Change Materials for Thermal Energy Storage of A Solar Cooker via Numerical Simulation

Directory of Open Access Journals (Sweden)

Dede Tarwidi

2016-11-01

Full Text Available In this paper, thermal performance of various phase change materials (PCMs used as thermal energy storage in a solar cooker has been investigated numerically. Heat conduction equations in cylindrical domain are used to model heat transfer of the PCMs. Mathematical model of phase change problem in the PCM storage encompasses heat conduction equations in solid and liquid region separated by moving solid-liquid interface. The phase change problem is solved by reformulating heat conduction equations with emergence of moving boundary into an enthalpy equation. Numerical solution of the enthalpy equation is obtained by implementing Godunov method and verified by analytical solution of one-dimensional case. Stability condition of the numerical scheme is also discussed. Thermal performance of various PCMs is evaluated via the stored energy and temperature history. The simulation results show that phase change material with the best thermal performance during the first 2.5 hours of energy extraction is shown by erythritol. Moreover, magnesium chloride hexahydrate can maintain temperature of the PCM storage in the range of 110-116.7°C for more than 4 hours while magnesium nitrate hexahydrate is effective only for one hour with the PCM storage temperature around 121-128°C. Among the PCMs that have been tested, it is only erythritol that can cook 10 kg of the loaded water until it reaches 100°C for about 3.5 hours. Article History: Received June 22nd 2016; Received in revised form August 26th 2016; Accepted Sept 1st 2016; Available online How to Cite This Article: Tarwidi, D., Murdiansyah, D.T, Ginanja, N. (2016 Performance Evaluation of Various Phase Change Materials for Thermal Energy Storage of A Solar Cooker via Numerical Simulation. Int. Journal of Renewable Energy Development, 5(3, 199-210. http://dx.doi.org/10.14710/ijred.5.3.199-210

Utveckling av hygienfunktioner i diskmaskiner : Desinfektion med hjälp av UV-ljus och ozon

OpenAIRE

Åberg, Linus

2008-01-01

This thesis within the field of Integrated Product development at the Royal Insitute of Technology, performed at Primary Development Dishcare at AB Electrolux, is supposed to find a solution to enhance the hygiene inside an Electrolux dishwasher. The outcomes of this thesis are functional prototypes to evaluate the efficiency of disinfection by the use of Ultra Violet Light and Ozone. The thesis has followed Electrolux Primary Development process, with delivarables and checkpoints. Ultra viol...

75 FR 22586 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of General...

Science.gov (United States)

2010-04-29

... Appliances Corp. (Bosch-Siemens Hausgerate GmbH), Electrolux Home Products, Equator, Fisher & Paykel... Corp. filed and was granted its waiver petition, \\2\\ as was Electrolux \\3\\ and Samsung.\\4\\ \\1\\ FR Vol...

Efectos de las cocinas de inducción en la calidad del producto técnico del servicio residencial

OpenAIRE

Fiallos Banda, Christian Eduardo

2015-01-01

This thesis work presents the results of an experimental investigation of the effects that will have in the quality of product that will be provided the electricity distribution companies, by the use of induction cookers that . The experimental part was developed by laboratory tests at the Salesian Polytechnic University, for 18 days in a sample of 2 induction cookers. Descriptions of procedures and elements used to perform testing and data acquisition also included. A summary of the relev...

76 FR 21879 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to LG...

Science.gov (United States)

2011-04-19

... granted waivers to Electrolux (76 FR 11440 (March 2, 2011)) and Samsung (76 FR 13169 (March 10, 2011... granted to Whirlpool, GE, Samsung and Electrolux, as well as previously to LG, the clothes washer test... make representations about the energy use of its clothes washer products for compliance, marketing, or...

A support approach for the conceptual design of energy-efficient cooker hoods

International Nuclear Information System (INIS)

Cicconi, Paolo; Landi, Daniele; Germani, Michele; Russo, Anna Costanza

2017-01-01

Highlights: •An eco-innovation approach to support the design of household appliances. •The research is focused on the energy labelling for kitchen hoods. •A software platform provides tools to configure and optimize new solutions. •A tool can calculate the energy efficiency indexes of a product configuration. -- Abstract: In Europe, kitchen hoods currently come with an energy label showing their energy efficiency class and other information regarding the energy consumption and noise level, as established by the European Energy Labelling Directive. Because of recent regulations, designs of cooker hoods must consider new issues, such as the evaluation of the energy efficiency, analysis of the energy consumption, and product lifecycle impact. Therefore, the development of eco-driven products requires Ecodesign tools to support eco-innovation and related sustainability improvements. The scope of the proposed research is to define a method and an agile and affordable platform tool that can support designers in the early estimation of product energy performance, including the calculation of energy efficiency indexes. The approach also considers the use of genetic algorithm methods to optimize the product configuration in terms of energy efficiency. The research context concerns large and small productions of kitchen hoods. The paper describes the methodological approach within the developed tool. The results show a good correlation between real efficiency values and calculated ones. A validation activity has been described, and a test case shows how to apply the proposed approach for the design of a new efficient product with an A-class Energy Efficiency Index.

Sustainable implementation of solar tunnel dryers, water heaters and cookers in Nepal

Energy Technology Data Exchange (ETDEWEB)

Kovacs, Peter [Danish Energy Management, DEM for Renewable Energy Project, REP, Dhobighat, Lalitpur (Nepal); Shrestha, Niraj; Shakya, Prajwal Raj [Renewable Energy Project, REP, Dhobighat, Lalitpur (Nepal); Pokharel, Govind [Alternative Energy Promotion Centre (AEPC), Lalitpur (Nepal)

2008-07-01

The Renewable Energy Project (REP) is a joint effort of the European Union and the Government of Nepal. Main objectives of the project are to create renewable energy infrastructure and services for the benefit of rural people in remote districts of Nepal. The REP will provide solar energy systems for public services in remote districts, as well as for income generating activities e.g. agro business and tourism. The REP focuses on the installation of institutional PV systems with a total capacity of 0.850 MWp. Concurrently, a number of solar thermal systems are being provided to community organizations (COs) in rural areas of Nepal. The priority applications for the solar thermal part are solar tunnel dryers for small industries drying vegetables. fruits and herbs, solar water heaters for community centers in trekking areas and large scale solar cookers in schools. The paper describes the Renewable Energy Project's implementation program for solar thermal technology and in particular the implications on design and usefulness of the solar tunnel dryer from on-site feasibility studies carried out by the project team. REP provides a framework for a sustainable implementation of these systems by carrying out the whole process from dissemination of information to demand collection, feasibility studies, design, procurement, commissioning and user training. Hand over of ownership will take place once the equipment is installed and successfully commissioned. Monitoring during the first year of operation should conclude the project. REP is co-funded by the European Union and the Government of Nepal. (orig.)

Study on Pot Forming of Induction Heater Type Rice Cookers by Forging Cast Process

Science.gov (United States)

Ohnishi, Masayuki; Yamaguchi, Mitsugi; Ohashi, Osamu

This paper describes a study result on pot fabrication by the forging cast process of stainless steel with aluminum. Rice cooked with the new bowl-shaped pot for the induction heater type rice cookers is better tasting than rice cooked with the conventional cylindrical one, due to the achievement of better heat conduction and convection. The conventional pot is made of the clad sheet, consisting of stainless steel and aluminum. However, it is rather difficult to form a bowl shape from the clad sheet, primarily due to the problem of a material spring back. The fabrication of a new type of a pot was made possible by means of the adoption of a forging cast process instead of the clad sheet. In this process, iron powder is inserted between stainless steel and aluminum in order to alleviate the large difference on the coefficient of expansion between each material. It was made clear that the application of two kinds of iron particle, namely 10 μm size powder on the stainless steel side and 44 μm on the aluminum side, enables the joints to become strong enough. The joint strength of the new pot by this fabrication process was confirmed by the tests of the shear strength and the fatigue tests together with the stress analysis.

Multiple-load series resonant inverter for induction cooking ...

Indian Academy of Sciences (India)

P Sharath Kumar

Department of Electrical & Electronics Engineering, CVR College of Engineering, Hyderabad, ... 8, August 2017, pp. 1309–1316 ..... ference: Towards Sustainable Energy. pp 1–6 ... industrial induction cooker system: circuit design, control.

[Design of coal stove, construction, assembly and test

International Nuclear Information System (INIS)

Bitrus, K.D.; Dauda, S.

2004-01-01

Some years back, after the discovery of Petroleum, Kerosene as one of the fraction of the distillation of Petroleum came into use as cooking fuel and a reduction in pressure was seen on wood and vegetation. Along this line, by the improvement of sciences and technology gas cooker and electric cooker were developed; but epileptic supply of electricity, gas and government policy on deforestation showed that continuous dependence on wood, electricity, gas and kerosene as the only sources of cooking fuel is not going to solve Nigeria domestic cooking problem. To solve this, coal as a source of heat energy could be used as a cooking fuel. However, this paper reports the design of coal stove, construction, assembly and test. The test result showed that using coal (anthracite) as the fuel on a pot of 200g containing 800g of water at room temperature could boil the water in 20 minutes

Techno-economic evaluation of masonry type animal feed solar cooker in rural areas of an Indian state Rajasthan

International Nuclear Information System (INIS)

Panwar, N.L.; Kothari, Surendra; Kaushik, S.C.

2013-01-01

Utilisation of animal draft power in agricultural operation and milk production is highly dependent on the feed and fodder. Properly cooked feed is digestive in nature and enhance milk production. Solar energy is promising option for slow cooking. Keeping this in view a masonry animal feed solar cooker (AFSC) was developed. It helps in the number of ways to improve the living standard of rural farmers and also reduce the CO 2 emission by replacing conventional fossil fuel. The AFSC can replace the 100 per cent biomass and save about 424.80 kg of CO 2 on annual basis and save about 24 INR per day. Usually women prepare animal feed in rural areas, hence cooking with AFSC save time and this time can be spear to take care of her family or in agricultural operation. This paper presents fuel replacement and reduction of carbon dioxide on annual basis and economic evaluation of AFSC. - Highlights: ► Considerable amount of energy can be saved on annual basis. ► This also helps to save the time and money of rural farmer. ► AFSC helps to reduce the greenhouse gas.

Activity pattern and personal exposure to nitrogen dioxide in indoor and outdoor microenvironments.

Science.gov (United States)

Kornartit, C; Sokhi, R S; Burton, M A; Ravindra, Khaiwal

2010-01-01

People are exposed to air pollution from a range of indoor and outdoor sources. Concentrations of nitrogen dioxide (NO(2)), which is hazardous to health, can be significant in both types of environments. This paper reports on the measurement and analysis of indoor and outdoor NO(2) concentrations and their comparison with measured personal exposure in various microenvironments during winter and summer seasons. Furthermore, the relationship between NO(2) personal exposure in various microenvironments and including activities patterns were also studied. Personal, indoor microenvironments and outdoor measurements of NO(2) levels were conducted using Palmes tubes for 60 subjects. The results showed significant differences in indoor and outdoor NO(2) concentrations in winter but not for summer. In winter, indoor NO(2) concentrations were found to be strongly correlated with personal exposure levels. NO(2) concentration in houses using a gas cooker was higher in all rooms than those with an electric cooker during the winter campaign, whereas there was no significant difference noticed in summer. The average NO(2) levels in kitchens with a gas cooker were twice as high as those with an electric cooker, with no significant difference in the summer period. A time-weighted average personal exposure was calculated and compared with measured personal exposures in various indoor microenvironments (e.g. front doors, bedroom, living room and kitchen); including non-smokers, passive smokers and smoker. The estimated results were closely correlated, but showed some underestimation of the measured personal exposures to NO(2) concentrations. Interestingly, for our particular study higher NO(2) personal exposure levels were found during summer (14.0+/-1.5) than winter (9.5+/-2.4).

Environmental Priorities In Strategic Product Development

DEFF Research Database (Denmark)

Simon, M; Poole, S.; Sweatman, A.

2000-01-01

-design framework consisting of analyse, report, prioritize and improve steps, at both strategic and operational levels. Tests the framework by application in an Electrolux subsidiary producing vacuum cleaners, tabulates LCA results for one product and its constituents and components. Concludes that prioritizing......Reports progress of the Design for Environmental Decision Support (DEEDS) project, gives the project's aim as the development of appropriate tools and methods for eco-design for use in the electrical/electronics sector. Bases development of the tools and methods on the results of a survey of 19...

Alternative energy in Nepal

Energy Technology Data Exchange (ETDEWEB)

Tiwari, H.B.; Bhandari, K.P.

2011-05-15

Renewable energy Technology (RET) becomes the mainstream option for rural Nepal to access modern source of energy. It focuses on the trend of RET applications consisting of biogas technology, solar thermal, micro and Pico hydropower, biomass technology bio fuel technology, wind power technology etc. The RET's which provide both electricity based as well as non electricity based services, have been shown to most immediately meet the needs of a cleaner indoor environment, better quality lightning for education and income generating, activities, alternative cooking fuels and agro processing as well as rural industries. Improved cooking stoves and much more beneficial than other technologies. Wind energy utilization is still not popular. Solar thermal to generate thermal energy to cook, warm and dry, biogas for lighting and cooking services. Micro hydropower for electric as well as mechanical use and solar PV mainly for domestic lighting may become choice. The most important Renewable Energy Technology (RET's) in Nepal are related to Pico hydropower and micro-hydropower, biomass energy (biogas, briquettes, gasifies, improved cooking stoves, bio-fuels etc.) solar photovoltaic energy, solar PV water pumping, solar thermal energy (solar heater, solar dryers, solar cookers etc.) and wind energy (such as wind generators, wind mills etc.). One renowned Non-governmental organization has been established in the Jhapa and Mornag Bhutanese refugee camp. Two families from all the seven camps in Nepal received one solar cooker, one hay box and two cooking posts to each family. Under this programme, a total of 6,850 solar cookers, 12600 hay boxes and 25,200 cooking pots have been distributed 2009. The number of beneficiaries from this program has reached 85,000. Before the distribution of the cookers and the utensils, the instruction and orientation training for the maintenance and repair and operation method was improved. The refugees were divided in 315 groups of 40

Implications of Different Household Cooking Energy on Indoor Air ...

African Journals Online (AJOL)

PROMOTING ACCESS TO AFRICAN RESEARCH ... Energy is a basic necessity of life for meeting domestic, social and industrial needs of man. ... The cooking methods sampled were firewood stove, kerosene stove, charcoal stove, electricity stove and gas cooker. ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Securing energy efficiency as a high priority. Scenarios for common appliance electricity consumption in Thailand

Energy Technology Data Exchange (ETDEWEB)

Foran, T. [Unit for Social and Environmental Research USER, Faculty of Social Sciences, Chiang Mai University, P.O. Box 144, Chiang Mai, 50200 (Thailand); Du Pont, P.T. [International Resources Group and Joint Graduate School of Energy and Environment, Bangkok (Thailand); Parinya, P. [The Joint Graduate School of Energy and Environment, King Mongkut' s University of Technology Thonburi, Bangkok (Thailand); Phumaraphand, N. [Electricity Generating Authority of Thailand, Nonthaburi (Thailand)

2010-11-15

Between 1995 and 2008, Thailand's energy efficiency programs produced an estimated total of 8,369 GWh/year energy savings and 1,471 MW avoided peak power. Despite these impressive saving figures, relatively little future scenario analysis is available to policy makers. Before the 2008 global financial crisis, electricity planners forecasted 5-6% long-term increases in demand. We explored options for efficiency improvements in Thailand's residential sector, which consumes more than 20% of Thailand's total electricity consumption of 150 TWh/year. We constructed baseline and efficient scenarios for the period 2006-2026, for air conditioners, refrigerators, fans, rice cookers, and compact fluorescent light bulbs. We drew on an appliance database maintained by Electricity Generating Authority of Thailand's voluntary labeling program. For the five appliances modeled, the efficiency scenario results in total savings of 12% of baseline consumption after 10 years and 29% of baseline after 20 years. Approximately 80% of savings come from more stringent standards for air conditioners, including phasing out unregulated air conditioner sales within 6 years. Shifting appliance efficiency standards to current best-in-market levels within 6 years produces additional savings. We discuss institutional aspects of energy planning in Thailand that thus far have limited the consideration of energy efficiency as a high-priority resource.

Solar cooking and baking in Central Europe; Kochen mit der Sonne. Solar kochen und backen in Mitteleuropa

Energy Technology Data Exchange (ETDEWEB)

Behringer, Rolf; Goetz, Michael

2008-07-01

Even in the Western and Central European climate, solar cookers can enable environment-friendly cooking and baking on about 100 to 150 days of the year. Some foods taste better when cooked more carefully, and vitamins and nutrients will be better preserved than in conventionally cooked food. After a short historical outline, the authors present some commercial solar cookers suited for our climate. This is followed by a detailed guide on how to construct a simple wooden solar cooker box from commercially available materials. Examples of solar cooking initiatives illustrate the many applications of solar cookers and parabolic trough cookers. The text is supplemented by practical hints and recipes.

Evaluation of fuel-switching opportunities in the residential sector

OpenAIRE

Almeida, Aníbal T. de; Lopes, Ana; Carvalho, Anabela; Mariano, Jorge; Nunes, Catarina

2004-01-01

The aim of this paper is to analyse the impact of different natural gas and electricity end-use technologies in the residential sector, which compete among themselves in terms of energy consumption and carbon emissions. The analysis of 17 different technology options, which were chosen in order to match the consumption behaviour of a typical Portuguese family, has shown that the use of electric heat pumps, both for space and water-heating, combined with the use of a natural gas cooker, leads ...

A Little Solar Story

DEFF Research Database (Denmark)

Ahmad, Bashir

1997-01-01

Experiences from use of solar cookers in India and many other places are different. But the story which is based on a field study in Gujarat state of India shows that during last twenty years there has been a tendency that many families do not continue to use their solar cookers. The study shows...... that the tendency is related with the lack of compatibility of this new technology (solar cooker) with the everyday real-life conditions of the families. In principle the findings are supported by an evaluation report on a solar cooker project in Burkina Faso. The conclusion is that the user should be involved...... in the solar cooker technological development process....

75 FR 51262 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to GE...

Science.gov (United States)

2010-08-19

... GE, and which has since been prescribed for Whirlpool, Electrolux, Samsung and Haier refrigerators... its adaptive control anti-sweat heater refrigerator-freezer products for compliance, marketing, or...

Alianças estratégicas e vantagem competitiva: uma visão analítica da cadeia de fornecedores Strategic alliances and competitive advantages: an analytic view of the supply chain

Directory of Open Access Journals (Sweden)

Jansen Maia Del Corso

2005-12-01

Full Text Available O objetivo deste trabalho é identificar as evidências de alianças estratégicas entre a empresa Electrolux do Brasil e seus principais fornecedores, analisando os elementos que as caracterizam, e, a partir daí, conhecer as vantagens competitivas adquiridas ou conquistadas tanto para a empresa quanto para os fornecedores com a sua implementação. As novas diretrizes estratégicas da empresa exigiram da área de suprimentos trabalhar de forma mais integrada com seus fornecedores, aproveitando o máximo possível de cada relação. A pesquisa está ancorada num estudo de caso cujo processo de amostragem foi o não probabilístico e a seleção dos entrevistados feita de forma intencional. O estudo foi dividido em três fases: 1ª obteve-se a seleção dos principais fornecedores; 2ª verificaram-se as características das relações entre a empresa e seus principais fornecedores, selecionando-se as cinco relações com o perfil mais próximo à aliança estratégica, com base nas características apontadas por Merli (1998; 3ª constataram-se a real existência das alianças e as vantagens competitivas geradas por elas, via entrevistas semi-estruturadas com os gestores dos fornecedores e os principais stakeholders envolvidos na relação. Por fim, foi possível concluir que as alianças identificadas geram vantagens competitivas tanto para o cliente quanto para os fornecedores.Evidence of strategic alliances between Electrolux do Brasil and its suppliers as sought as well as the related aspects to understand competitive advantages involved. New strategic directives of Electrolux demanded closer cooperation with between purchasing and suppliers to better exploit each relationship. The sample used in this case study was not probabilistic and those participating in the semi-structured interviews were intentionally selected. Dealings with major suppliers were first examined to determine the five relationship aspects whose characteristics are

Fast thermal cycling of acetanilide and magnesium chloride hexahydrate for indoor solar cooking

International Nuclear Information System (INIS)

El-Sebaii, A.A.; Al-Amir, S.; Al-Marzouki, F.M.; Faidah, Adel S.; Al-Ghamdi, A.A.; Al-Heniti, S.

2009-01-01

Solar cookers are broadly divided into a direct or focusing type, indirect or box-type and advanced solar cookers. The focusing and box-type solar cookers are for outdoor applications. The advanced solar cookers have the advantage of being usable indoors and thus solve one of the problems, which impede the social acceptance of solar cookers. The advanced type solar cookers are employing additional solar units that increase the cost. Therefore, the solar cooker must contain a heat storage medium to store thermal energy for use during off-sunshine hours. The main aim of this study is to investigate the influence of the melting/solidification fast cycling of the commercial grade acetanilide C 8 H 9 NO (T m = 116 deg. C) and magnesium chloride hexahydrate MgCl 2 .6H 2 O (T m = 116.7 deg. C) on their thermo-physical properties; such as melting point and latent heat of fusion, to be used as storage media inside solar cookers. Five hundred cycles have been performed. The thermo-physical properties are measured using the differential scanning calorimetric technique. The compatibility of the selected phase change materials (PCMs) with the containing material is also studied via the surface investigation, using the SIM technique, of aluminum and stainless steel samples embedded in the PCM during cycling. It is inferred that acetanilide is a promising PCM for cooking indoors and during law intensity solar radiation periods with good compatibility with aluminum as a containing material. However, MgCl 2 .6H 2 O is not stable during its thermal cycling (even with the extra water principle) due to the phase segregation problem; therefore, it is not recommended as a storage material inside solar cookers for cooking indoors. It is also indicated that MgCl 2 .6H 2 O is not compatible with either aluminum or stainless steel.

76 FR 19077 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

Science.gov (United States)

2011-04-06

... technology. Specifically, DOE granted GE, Whirlpool, Electrolux (3 waivers), LG, Samsung (2 waivers), and...- freezer products for compliance, marketing, or other purposes only to the extent that such products have...

75 FR 51264 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to LG...

Science.gov (United States)

2010-08-19

... granted GE, Whirlpool, Electrolux, Samsung, and Haier waivers on February 27, 2008 (73 FR 10425), May 5... control anti-sweat heater refrigerator-freezer products for compliance, marketing, or other purposes only...

77 FR 65671 - Aluminum Extrusions From the People's Republic of China: Notice of Partial Rescission of...

Science.gov (United States)

2012-10-30

... Nanhai Hongjia Aluminum Alloy Co., Ltd. (Hongjia) and Tianjin Ganglv Nonferrous Metal Materials Co., Ltd..., ``Electrolux'') withdrew its request for review of Alnan Aluminium Co., Ltd. (Alnan), Clear Sky Inc. (Clear Sky...

Fast thermal cycling of acetanilide and magnesium chloride hexahydrate for indoor solar cooking

Energy Technology Data Exchange (ETDEWEB)

El-Sebaii, A.A.; Al-Amir, S.; Al-Marzouki, F.M.; Faidah, Adel S.; Al-Ghamdi, A.A.; Al-Heniti, S. [Physics Dept., Faculty of Science, King Abdul Aziz Univ., P.O. Box 80203, Jeddah 21589 (Saudi Arabia)

2009-12-15

Solar cookers are broadly divided into a direct or focusing type, indirect or box-type and advanced solar cookers. The focusing and box-type solar cookers are for outdoor applications. The advanced solar cookers have the advantage of being usable indoors and thus solve one of the problems, which impede the social acceptance of solar cookers. The advanced type solar cookers are employing additional solar units that increase the cost. Therefore, the solar cooker must contain a heat storage medium to store thermal energy for use during off-sunshine hours. The main aim of this study is to investigate the influence of the melting/solidification fast cycling of the commercial grade acetanilide C{sub 8}H{sub 9}NO (T{sub m} = 116 C) and magnesium chloride hexahydrate MgCl{sub 2}.6H{sub 2}O (T{sub m} = 116.7 C) on their thermo-physical properties; such as melting point and latent heat of fusion, to be used as storage media inside solar cookers. Five hundred cycles have been performed. The thermo-physical properties are measured using the differential scanning calorimetric technique. The compatibility of the selected phase change materials (PCMs) with the containing material is also studied via the surface investigation, using the SIM technique, of aluminum and stainless steel samples embedded in the PCM during cycling. It is inferred that acetanilide is a promising PCM for cooking indoors and during low intensity solar radiation periods with good compatibility with aluminum as a containing material. However, MgCl{sub 2}.6H{sub 2}O is not stable during its thermal cycling (even with the extra water principle) due to the phase segregation problem; therefore, it is not recommended as a storage material inside solar cookers for cooking indoors. It is also indicated that MgCl{sub 2}.6H{sub 2}O is not compatible with either aluminum or stainless steel. (author)

Tolmuimejaga üha mugavam koristada / Kirsti Herttua ja Ingrid Maasik

Index Scriptorium Estoniae

Herttua, Kirsti

2013-01-01

Testis tolmukotiga tolmuimejad hinnaklasis 160-250€: Electrolux Z8820B ; Hoover TPP2339 ; Miele S2181 ; Nilfisk Bravo Parquet ; Philips FC9170 ; Siemens VSQ4GP1268 ; Volta U6820R. Kommenteerib Kalle Kaljurahn

Energy savings by implementation of light quality LED lighting. Final report; Implementering af energibesparelser ved benyttelse af hoejkvalitets LED belysning. Slutrapport

Energy Technology Data Exchange (ETDEWEB)

Dam-Hansen, C.; Thorseth, A.; Poulsen, Peter

2010-03-15

The project developed two new LED light sources and systems, emphasising the potential of LED technology for energy savings and lighting quality. A LED light source for display case lighting, replacing incandescent lamps, was successfully installed in the Treasury at Rosenborg Castle in Copenhagen, Denmark, and it was decided to extend the solution in 2010. Electricity savings of 74% were achieved. LED light sources replacing halogen bulbs in cooker hoods reduce electricity consumption by 69% and ensure even lighting of the entire working surface with about 500 lux at all cooking areas. Furthermore, a new LED optics system was patented. (ln)

Final report - Sundyne Company

Energy Technology Data Exchange (ETDEWEB)

Long, J.B.

1994-09-27

Solar cookers offer a viable alternative to conventional cooking methods in many areas, and can be an effective tool in the fight against the deforestation and desertification that plague many developing countries. However, there have been numerous obstacles to the successful dissemination of solar cookers in the past. The purpose of this paper is to identify opportunities, review constraints and develop a marketing strategy to disseminate the Sundyne Solar Cooker (SSC) in developing countries.

Ecodesign Navigator

DEFF Research Database (Denmark)

Simon, M; Evans, S.; McAloone, Timothy Charles

The Ecodesign Navigator is the product of a three-year research project called DEEDS - DEsign for Environment Decision Support. The initial partners were Manchester Metropolitan University, Cranfield University, Engineering 6 Physical Sciences Resaech Council, Electrolux, ICL, and the Industry...

Reconfigurable Computing Platforms and Target System Architectures for Automatic HW/SW Compilation

OpenAIRE

Lange, Holger

2011-01-01

Embedded systems found their way into all areas of technology and everyday life, from transport systems, facility management, health care, to hand-held computers and cell phones as well as television sets and electric cookers. Modern fabrication techniques enable the integration of such complex sophisticated systems on a single chip (System-on-Chip, SoC). In many cases, a high processing power is required at predetermined, often limited energy budgets. To adjust the processing power even more...

Corpore pälvis turunduskommunikatsiooni kategoorias Baltic PR Awards 2011 peaauhinna / Aleksandra Moorast

Index Scriptorium Estoniae

Moorast, Aleksandra, 1980-

2012-01-01

Üritus "Electrolux VIP koertepidu - koerad punasel vaibal" tõi suhtekorraldusfirmale Corpore'i konkursil Baltic PR Awards 2011 turunduskommunikatsiooni kategoorias esikoha. Ürituse eesmärk oli toetada Electroluxi kaubamärki ning tutvustada uut tolmuimejat, mis on mõeldud lemmikloomade karvade koristamiseks

White Paper on Energy Efficiency Status of Energy-Using Products in China (2011)

Energy Technology Data Exchange (ETDEWEB)

Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Romankiewicz, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-06-01

This White Paper focuses on the areas and products involved in the above tasks, based on the White Paper - Energy Efficiency Status of Energy-Using Products in China (2010), here referred to as “White Paper 2010”, which analyzed the energy efficiency status of 21 typical energy-using products in five sectors: household appliances, office equipment, commercial equipment, industrial equipment, and lighting equipment. Table 1 illustrates the detailed product coverage for this year’s paper, noting the addition of three household appliance items (automatic electric rice cooker, AC electric fan, and household induction cooktop) and one industrial sector item (three-phase distribution transformer).

Energy Usage of Residents on Offshore Islands in Taiwan

Directory of Open Access Journals (Sweden)

Szu-Cheng Lu

2015-05-01

Full Text Available A field study was conducted through interviews on offshore islands in Taiwan to investigate the energy usage of local residents. A comparison of household appliance usage in mainland Taiwan with that on the offshore islands revealed that, overall, the most commonly used household appliances are steam cookers/rice cookers, water dispensers, and washing machines. For other household appliances, Levels 2 and 3 offshore isles have lower use penetration rates compared with those in mainland Taiwan and on Level 1 offshore isles, particularly for the use of computers. By contrast, the use penetration rate for chest freezers on Levels 2 and 3 offshore isles is high, and each household has one or more freezers on average. This appliance is not a commonly observed household product in mainland Taiwan or on Level 1 offshore isles. Furthermore, because of the government policy, every household on parts of Level 2 offshore isles and on all Level 3 offshore isles has a fixed monthly charge of electricity. The transportation of liquefied petroleum gas is also inconvenient, and the gas price is slightly higher, leading to the tendency of residents to consume excessive amounts of electrical energy, which does not correspond with the aim of the government to conserve energy and reduce carbon emissions; thus, the relevant authorities’ review and improvement on energy consumption on Levels 2 and 3 offshore isles are required.

75 FR 4539 - Energy Conservation Program for Consumer Products: Publication of the Petition for Waiver and...

Science.gov (United States)

2010-01-28

... condensation. The existing test procedure does not take humidity or adaptive control technology into account..., as needed, to evaporate excess moisture. According to the petitioner, Electrolux's technology is... anti-sweat heaters to evaporate excess moisture. The existing DOE test procedure cannot be used to...

Solar cooking in Senegalese villages: An application of best–worst scaling

International Nuclear Information System (INIS)

Vanschoenwinkel, Janka; Lizin, Sebastien; Swinnen, Gilbert; Azadi, Hossein; Van Passel, Steven

2014-01-01

Dissemination programs of nontraditional cookstoves often fail. Nontraditional cookstoves aim to solve problems associated with biomass fuel usage in developing countries. Recent studies do not explain what drives user's cookstove choice. This study therefore builds a holistic framework that centralizes product-specific preferences or needs. The case study identifies product-specific factors that influence rural Senegalese inhabitants to switch to solar cooking, using best–worst scaling. Looking at the preferences, the case study classified 126 respondents, in three distinct market segments with different solar cooking expectations. The paper identifies socio-demographic characteristics that explain these differences in the respondents' preferences. Finally, the respondent sample is divided in two groups: solar cooker owners and non-owners. When studied with regard to the same issue, solar cooker owners appear to value benefits of the solar cooker lower than non-owners. This is due to program factors (such as formations, after-sales network) and miscommunication (such as a wrong image of the solar cooker) that highly influenced the respondents' cookstove choice. As a conclusion, solar cookers and solar cooking programs are not always adapted to the needs and requirements of the end-users. Needs-oriented and end-user adopted strategies are necessary in order to successfully implement nontraditional cookstoves programs. - Highlights: • Current solar cookers and their programs do not sufficiently fit end-users' needs. • We centralize product-specific preferences in a framework integrating all variables. • Looking at these preferences, three distinct market segments are identified. • Preferences are influenced by both socio-demographic and program characteristics

Mixed valence nanostructured Mn3O4 for supercapacitor applications

Indian Academy of Sciences (India)

respectively, were obtained for charge–discharge cycles at a constant current of 12.74 mA cm−2. Keywords. ... power using a Electrolux EM 18EG70SL (1000 W) oven for. 15 min at .... 22, 400), where Vm is the volume of gas adsorbed at STP,.

Household energy transition in Hong Kong

Energy Technology Data Exchange (ETDEWEB)

Hills, Peter (Hong Kong Univ. (Hong Kong). Centre of Urban Planning and Environmental Management)

1994-05-01

A household energy survey in Hong Kong confirmed that domestic energy consumption is dominated by modern fuels. Household spending on fuels typically amounts to less than 3% of monthly income. Delivered energy use per household per month averages 1.77 GJ and per capita use 0.37 GJ. Electricity accounts for more than half of fuel expenditure and energy use. Patterns of fuel choice and use are quite consistent across income levels, although electricity use rises with higher household incomes. Many households use a combination of kerosene, gas and electricity (rice cookers) for cooking, which appears to reflect culinary practices more than fuel prices, perceived safety or availability. Electrical appliance saturation is high already, and air conditioning use is growing rapidly. Household electricity consumption may increase substantially during the 1990s as higher comfort levels lead to increased heating and cooling demand and space standards in public housing units improve. (Author)

Algoritmo inteligente para evaluar el impacto de la introducción masiva de cocinas de inducción; Intelligent algorithm for evaluating the impact of the introduction of mass induction

Directory of Open Access Journals (Sweden)

Jorge Enrique Carrión González

2015-09-01

Full Text Available El Ministerio de Electricidad y Energía Renovable de Ecuador (MEER está implementando el plan nacional de coccióneficiente, en el país y en la región Sur. El plan se basa en reemplazar las cocinas que usan gas licuado de petróleo (GLPpor cocinas eléctricas de inducción, estos cambios representan un aumento considerable en la demanda eléctrica delsector residencial. Los estudios de los sistemas eléctricos de distribución realizados permiten evaluar el comportamientoactual de las redes eléctricas y analizar futuros escenarios para poder determinar las mejoras de carácter técnico yorganizativo que deben introducirse. Seelaboró un algoritmo genético especializado para evaluar el efecto querepresenta en los transformadores de distribución la introducción masiva de las cocinas de inducción, con vistas aresolver el problema de un crecimiento brusco de la demanda de energía, minimizando los costos de inversión en nuevosequipos de transformación.The Ministry of Electricity and Renewable Energy of Ecuador (MEER is implement in the national plan for efficient cooking in thesouthern region and the country. The planes based on replacing kitchens using liquefied petroleum gas (LPG for induction cookers,representing an increase in electricity demanding the residential sector. Studies of electrical distribution systems made it possible toassess the current behavior of electrical networks and analyze future scenarios to determinism provident in technical and organizationalmeasures to be introduced. A genetic algorithm to evaluate the effect on distribution transformer soft he massive introduction ofinduction cookers, with view to resolving the problem of sharp growthin demand for energy while minimizing the costs of investment innew equipment was developed.

Toredad ja taibukad / Kadi Lehtmets

Index Scriptorium Estoniae

Lehtmets, Kadi

2008-01-01

Electrolux Design Lab'08 ülemaailmse disainikonkursi lõppvõistluse finaliste: LG-Electronicsi Art Flower-külmik, Bugatti Uma-köögikaal, Bodumi ekspressomasin, Zacki veiniriiul Fonare, sahtlikapp Drawer Kitchen, olemasolevate toiduainete põhjal retsepte genereeriv seade Sook (Adam Brodowski, USA), moodulitest koosnev külmik Flatshare

76 FR 79666 - Decision and Order Granting a Waiver to LG from the Department of Energy Residential Clothes...

Science.gov (United States)

2011-12-22

..., 2011)) and Samsung (76 FR 13169 (Mar. 10, 2011); 76 FR 50207 (Aug. 12, 2011)). DOE notes that its... was submitted by LG, the waivers granted to Whirlpool, GE, Samsung and Electrolux, as well as... may make representations about the energy use of its clothes washer products for compliance, marketing...

Culture & Cognition in a Complex Megaorganization: Implications for Military Leadership

Science.gov (United States)

2010-01-01

others. Something as ubiquitous and innocuous as the word Coca Cola to an American translates literally into "bite the wax tadpole" in Chinese. The...an Electrolux!" in advertising its vacuum machines in the United States (Peng, 2009: 106). An American expatriate in Malaysia was introduced to a

Uses of solar energy in Costa Rica

Energy Technology Data Exchange (ETDEWEB)

Nandwani, Shyam S. [Laboratorio de Energia Solar, Departamento de Fisica, Universidad Nacional Heredia, P.O. Box 728, 3000 Heredia (Costa Rica)

2006-04-15

Costa Rica, a small country with the population of 4 million, and without military and hence no military expenditure, promotes the use of renewable sources like Hydro, Mini hydro, Wind, Geothermal and Sun, mainly for electricity generation. Almost 90% of the electricity is produced from these renewable sources. Through different policies and some incentives, etc., private generation is also encouraged and there are some decentralized systems like solar water heaters, swimming pool heaters, cookers, dryers and stills and also photo voltaic panels. The last ones are mostly for the population where there is no electric grid. Depending on the province, 91-99.5% of the population is electrified. Government also encourages the use of energy saving devices specially at domestic and industrial sector. In addition to provide these data, some of the solar energy systems are mentioned. [Author].

One thousand thermal cycles of magnesium chloride hexahydrate as a promising PCM for indoor solar cooking

International Nuclear Information System (INIS)

El-Sebaii, A.A.; Al-Heniti, S.; Al-Agel, F.; Al-Ghamdi, A.A.; Al-Marzouki, F.

2011-01-01

Research highlights: → Solar cookers must contain a PCM for cooking indoors. → MgCl 2 .6H 2 O when it cycled in a sealed container. → MgCl 2 .6H 2 O shows maximum of 0.1-3.5 o C of supercooling. → MgCl 2 .6H 2 O is a promising PCM for thermal energy storage. -- Abstract: Cooking is the major necessity for people all over the world. It accounts for a major share of energy consumption in developing countries. There is a critical need for the development of alternative, appropriate, affordable methods of cooking for use in developing countries. There is a history for solar cooking since 1650 where they are broadly divided into direct or focusing type, box-type and indirect or advanced solar cookers. The advanced solar cookers have the advantage of being usable indoors and thus solve one of the problems, which impede the social acceptance of solar cookers. The advanced type solar cookers are employing additional solar units that increase the cost. Therefore, the solar cooker must contain a heat storage medium to store thermal energy for use during off-sunshine hours. The main aim of this paper is to investigate the influence of the melting/solidification fast thermal cycling of commercial grade magnesium chloride hexahydrate (MgCl 2 .6H 2 O) on its thermo-physical properties; such as melting point and latent heat of fusion, to be used as a storage medium inside solar cookers. One thousand cycles have been performed in a sealed container under the extra water principle. The thermo-physical properties are measured using the differential scanning calorimetric technique. It is indicated that MgCl 2 .6H 2 O with the extra water principle and hermetically sealing of the container is a promising phase change material (PCM) for cooking indoors and during law intensity solar radiation periods. It is also found from the melting/solidification behavior of MgCl 2 .6H 2 O that it is solidify almost without supercooling; except in few cases where it showed maximum of 0

Efecto del voltaje en el desempeño de las cocinas de inducción

OpenAIRE

Vela Pilaquinga, Edwin Orlando

2015-01-01

This paper presents the results of an experimental investigation of the effects that voltage variations in the performance of induction cookers to be sold in the country is presented, Initially the basic concepts and principles of operation of induction cooking is presented; as also shown in synthesized form the general characteristics of plan incorporating induction cookers in the homes of the Ecuadorian population, highlighting the most important e...

Network Analysis of Reconnaissance and Intrusion of an Industrial Control System

Science.gov (United States)

2016-09-01

quality meals for Soldiers and consists of 6 manufacturing processes . As seen in the process map (Fig. 1), the meat and vegetables are cooked...to a central plant switch in the initial security configuration. Along with the process network components, 4 additional VMs connected to the...HMI Monitored the chicken cooker PLC 10.10.10.2/24 Chicken cooker PLC Controlled the chicken meat preparation and cooking process 10.10.10.1/24

Measures for improving the adoption of higher efficiency appliances in Indonesian households: An analysis of lifetime use and decision-making in the purchase of electrical appliances

International Nuclear Information System (INIS)

Wijaya, Muhammad Ery; Tezuka, Tetsuo

2013-01-01

Highlights: ► We observe human psychosocial variables regarding purchase of electrical appliances. ► Two cities with different cultures are subject of this study – Bandung and Yogyakarta. ► Differences in the lifetime of appliances can be attributed to the cultural. ► Ads and store’s staff have the greatest impact on people’s choice of appliances. ► Adoption of higher-efficiency appliances could be implemented based on each culture. - Abstract: One approach to decreasing electricity consumption is to facilitate the replacement of older appliances with new, higher-efficiency. The objectives of this paper are to compare and analyse the replacement of appliances in two cities of Indonesia – Yogyakarta and Bandung – that are characterised by different cultural backgrounds, ethnicities, and decision-making processes in the household purchase of electrical appliances. A questionnaire survey method was employed to obtain information on behavioural economics and human psychosocial variables such as attitudes, beliefs and perceived benefits regarding the replacement and purchase of electrical appliances. The results show that refrigerators in Yogyakarta have a longer lifetime than in Bandung. However, in Bandung, air conditioners, electric fans, rice cookers, and water pumps have a longer lifetime than in Yogyakarta. These differences in the lifetime of appliances can be attributed to the cultural differences within the two cities that are reflected in the manner in which people use electrical appliances as well as to their lack of knowledge regarding appliance operation. An analysis of the factors influencing the purchase of appliances indicated that people in Yogyakarta show a greater awareness of the benefits of adopting higher-efficiency appliances than do persons in Bandung. The following suggestions could be implemented to improve the strategy of encouraging the adoption of higher-efficiency appliances: (1) in Yogyakarta, energy labelling could be

Field data collection of miscellaneous electrical loads in Northern California: Initial results

Energy Technology Data Exchange (ETDEWEB)

Greenblatt, Jeffery B. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division. Energy Analysis and Environmental Impacts Dept.; Pratt, Stacy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division. Energy Analysis and Environmental Impacts Dept.; Willem, Henry [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division. Energy Analysis and Environmental Impacts Dept.; Claybaugh, Erin [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division. Energy Analysis and Environmental Impacts Dept.; Desroches, Louis-Benoit [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division. Energy Analysis and Environmental Impacts Dept.; Beraki, Bereket [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division. Energy Analysis and Environmental Impacts Dept.; Nagaraju, Mythri [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division. Energy Analysis and Environmental Impacts Dept.; Price, Sarah K. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division. Energy Analysis and Environmental Impacts Dept.; Young, Scott J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division. Energy Analysis and Environmental Impacts Dept.

2013-02-25

This report describes efforts to measure energy use of miscellaneous electrical loads (MELs) in 880 San Francisco Bay Area homes during the summer of 2012. Ten regions were selected for metering: Antioch, Berkeley, Fremont, Livermore, Marin County (San Rafael, Novato, Fairfax, and Mill Valley), Oakland/Emeryville, Pleasanton, Richmond, San Leandro, and Union City. The project focused on three major categories of devices: entertainment (game consoles, set-top boxes, televisions and video players), home office (computers, monitors and network equipment), and kitchen plug-loads (coffee/espresso makers, microwave ovens/toaster ovens/toasters, rice/slow cookers and wine chillers). These categories were important to meter because they either dominated the estimated overall energy use of MELs, are rapidly changing, or there are very little energy consumption data published. A total of 1,176 energy meters and 143 other sensors were deployed, and 90% of these meters and sensors were retrieved. After data cleaning, we obtained 711 valid device energy use measurements, which were used to estimate, for a number of device subcategories, the average time spent in high power, low power and “off” modes, the average energy use in each mode, and the average overall energy use. Consistent with observations made in previous studies, we find on average that information technology (IT) devices (home entertainment and home office equipment) consume more energy (15.0 and 13.0 W, respectively) than non-IT devices (kitchen plug-loads; 4.9 W). Opportunities for energy savings were identified in almost every device category, based on the time spent in various modes and/or the power levels consumed in those modes. Future reports will analyze the collected data in detail by device category and compare results to those obtained from prior studies.

Applications of shape memory alloys in Japan

International Nuclear Information System (INIS)

Asai, M.; Suzuki, Y.

2000-01-01

In Japan, a first application of shape memory TiNi alloy was a moving flap in an air-conditioner which was developed as sensing function of shape memory alloy at Matsushista Electric Industrial Co. Then, shape memory utilized in a coffee maker, an electric rice-cooker, a thermal mixing valve and etc. were commercialized in Japan. And brassiere wires, a guide wire for medical treatment, an antenna for portable telephone and others were commercialized utilizing superelasticity. At the same time with these commercial products, there was not only progress in fabrication technology to effect accurate transformation temperature, but also the discovery of small hysteresis alloy such as R-phase or TiNiCu alloy and low transformation temperature alloy such as TiNiFe, TiNiV and TiNiCo alloys. Therefore the shape memory alloy market has expanded widely to electric appliances, automobile, residence, medical care and other field today. (orig.)

Influence of cooking on anthocyanins in black rice (Oryza sativa L. japonica var. SBR).

Science.gov (United States)

Hiemori, Miki; Koh, Eunmi; Mitchell, Alyson E

2009-03-11

The composition and thermal stability of anthocyanins in black rice (Oryza sativa L. japonica var. SBR) produced in California were investigated. Six anthocyanin pigments were identified and quantified by high performance liquid chromatography using photo diode-array detection (HPLC-PDA) and electrospray ionization mass spectrometry [LC-(ESI)MS/MS]. The predominant anthocyanins are cyanidin-3-glucoside (572.47 microg/g; 91.13% of total) and peonidin-3-glucoside (29.78 microg/g; 4.74% of total). Minor constituents included three cyanidin-dihexoside isomers and one cyanidin hexoside. Thermal stability of anthocyanins was assessed in rice cooked using a rice cooker, pressure cooker, or on a gas range. All cooking methods caused significant (P rice cooker (74.2%) and gas range (65.4%). Conversely, levels of protocatechuic acid increased 2.7 to 3.4 times in response to all cooking methods. These findings indicate that cooking black rice results in the thermal degradation of cyanidin-3-glucoside and concomitant production of protocatechuic acid.

Modifikasi dan Uji Kinerja Kompos Spiral dengan Bahan Bakar Minyak Jarak Pagar

Directory of Open Access Journals (Sweden)

Gatot S.A Fatah

2013-01-01

Full Text Available Energy crisis in Indonesia is still a problem that has not been fully resolved. Kerosene as the primary fuel for cooking, the price is very expensive (at Rp 8000.-/liter. Until now, the pressure cooker kerosene is still used by cake makers, bread, and noodle. By modifying the part of the cup rubbing alcohol and add a protective piping hot, the stove can be used with pressurized fuel Jatropha oil. Tobacco industry, ceramic and asphalt still use the stove. The purpose of this study is to obtain a prototype pressure cooker spiral type, fueled with jatropha oil by modifying the part of the reservoir cup rubbing alcohol, pipe and nozzle heat shield oil expenses. Modified pressure cooker and test performance using Jatropha oil is obtained as follows: the fuel consumption of 935 ml / hour; pre-heating 17 minutes; time required to boil 2 liters of water was 5 minutes; noise level of 83.3 dB and the reddish color of blue flame.

Electro-smog; Elektrosmog. Ein Thema in aller Munde, doch viele Quellen sind wenig bekannt

Energy Technology Data Exchange (ETDEWEB)

Thalmann, K. [Ecosens AG, Wallisellen (Switzerland); Gugler, M. [Schaffner EMV AG, Luterbach (Switzerland)

2007-07-01

This article deals with the topic of electro-smog - the non-ionising radiation produced by technical installations in low and high-frequency ranges. Various sources such as mobile telephones, radio and television and newer sources such as WLAN and Bluetooth are discussed. The correct installation of electrical circuits in buildings is considered as being a simple and effective means of reducing mains-frequency electro-smog. Effects on human beings are discussed and regulations concerning protection against non-ionising radiation are examined. The fact that certain electrical and magnetic fields such as those caused by cookers, vacuum cleaners and hair-dryers are short term, whereas radio-alarms, laptops and charging stations are quasi-continuous sources. Also the placing of boilers and refrigerators is considered. The specific absorption rate (SAR) value for mobile telephones is also looked at and recommendations are made on keeping distance to electro-magnetic sources.

Heat transfer and performance analysis of thermoelectric stoves

International Nuclear Information System (INIS)

Najjar, Yousef S.H.; Kseibi, Musaab M.

2016-01-01

Highlights: • Design and testing of a thermo electric stove. • Three biofuels namely: wood, peat and manure are used. • Heat transfer analysis is detailed. • Resulting thermoelectric energy for vital purposes in remote poor regions. • Evaluation of performance of the stove subcomponents. - Abstract: Access to electricity is one of the important challenges for remote poor regions of the world. Adding TEG (thermoelectric generators) to stoves can provide electricity for the basic benefits such as: operating radio, light, phones, medical instruments and other small electronic devices. Heat transfer analysis of a multi-purpose stove coupled with 12 TEG modules is presented. This analysis comprises a well aerodynamically designed combustor, finned TEG base plate, cooker and water heater beside the outer surface for space heating. Heat transfer analysis was also carried out for all the subcomponents of the stove, and performance predicted against the experimental results. It was found that the maximum power obtained is about 7.88 W using wood, manure or peat with an average overall efficiency of the stove about 60%.

Techno-economic assessment of an off-grid PV system for developing regions to provide electricity for basic domestic needs: A 2020–2040 scenario

International Nuclear Information System (INIS)

Zubi, Ghassan; Dufo-López, Rodolfo; Pasaoglu, Guzay; Pardo, Nicolás

2016-01-01

Highlights: • Off-grid PV has a huge potential to provide effective solutions for energy poverty. • Its implementation barrier is economic, but paths to effectively tackle this exist. • The implementation barriers will be reduced by a favourable technological evolution. • Cost reductions to the level of grid-connected power will be eventually achieved. - Abstract: While in the developed countries electrification is paving the way for progress and prosperity, nowadays electricity is still not accessible for about 18% of the world’s population. Lack of power grids is the main reason that prevents millions in remote areas in developing countries from using electricity for the daily basic needs. PV systems provide an effective solution for these regions, but affordability remains an issue. This barrier can be widely overcome on the short term by limiting PV power supply to very high added value applications and by properly exploiting innovations, especially in energy efficiency and cost reductions. Additional to that, the long-term perspectives of off-grid PV are very favourable based on its ongoing technological improvements and cost reductions. This paper studies four off-grid PV cases of which each could cover a combination of basic energy needs regarding light, cooking, food conservation and electronic appliances. Case I considers a system that supplies power for LED lamps and electronic devices. Accordingly, Case II adds a fridge and Case III an electric rice cooker to Case I, while Case IV adds both. The paper elaborates on available technologies and future developments regarding all components in order to assess the long term evolution and potential of these applications, most specifically how their affordability would evolve over time. The modelling and optimization of the four cases are performed using the software iHOGA, which is an efficient tool to provide the lowest cost solution for off-grid PV systems. The use of iHOGA for the four cases and

Electric shock and electrical fire specialty

International Nuclear Information System (INIS)

2011-02-01

This book deals with electric shock and electrical fire, which is made up seven chapters. It describes of special measurement for electric shock and electrical fire. It mentions concretely about electrical fire analysis and precautionary measurement, electrical shock analysis cases, occurrence of static electricity and measurement, gas accident, analysis of equipment accident and precautionary measurement. The book is published to educate the measurement on electric shock and electrical fire by electrical safety technology education center in Korea Electrical Safety Corporation.

Demand management by means of substitution energetics in home cooking: Costa Rica's metropolitan area; Gerenciamento da demanda mediante substituicao energetica na coccao residencial: regiao metropolitana da Costa Rica

Energy Technology Data Exchange (ETDEWEB)

Herrera, Alfonso Herrera

1996-07-01

The electric power system management in Costa Rica is analyzed. The possibility of substitution of LPG (Liquefied Petroleum Gas) for electric power, in home cooking, are identified as one of the most important program in order to reduce increasing load peak and energy requirements in electric power system of Costa Rica. The sustain ability of the substitution program stands on the current process of electric power supply. The primary power sources used in generating electric power in rush hours are oil-based; this process is less efficient than directly using LPG for home cooking. Large scale substitution with LPG in home cooking will reduce increasing electric power demand in peak hours, reducing subsidized electricity sales, with better use of combustibles presently imported, improving the country commercial balance and preventing or postponing electric power system expansion investments. Three different perspectives have been considered in evaluating economical effectiveness in substituting power sources: user, utility and society perspectives. Due to subsidized electric power prices, residential users do not enough interest in substituting of LPG for power source; unless LPG cookers are also subsidized. However, positive results for the distribution utility are enough in order to offer these kind of incentives. Explicit treatment of these kind of programs, including the efficiency increment as an available resource for electric power utilities in Costa Rica, will avoid the implantation of most of combustion plants now planned in current National Electric Power Plant expansion program. (author)

Demand management by means of substitution energetics in home cooking: Costa Rica's metropolitan area; Gerenciamento da demanda mediante substituicao energetica na coccao residencial: regiao metropolitana da Costa Rica

Energy Technology Data Exchange (ETDEWEB)

Herrera, Alfonso Herrera

1996-07-01

The electric power system management in Costa Rica is analyzed. The possibility of substitution of LPG (Liquefied Petroleum Gas) for electric power, in home cooking, are identified as one of the most important program in order to reduce increasing load peak and energy requirements in electric power system of Costa Rica. The sustain ability of the substitution program stands on the current process of electric power supply. The primary power sources used in generating electric power in rush hours are oil-based; this process is less efficient than directly using LPG for home cooking. Large scale substitution with LPG in home cooking will reduce increasing electric power demand in peak hours, reducing subsidized electricity sales, with better use of combustibles presently imported, improving the country commercial balance and preventing or postponing electric power system expansion investments. Three different perspectives have been considered in evaluating economical effectiveness in substituting power sources: user, utility and society perspectives. Due to subsidized electric power prices, residential users do not enough interest in substituting of LPG for power source; unless LPG cookers are also subsidized. However, positive results for the distribution utility are enough in order to offer these kind of incentives. Explicit treatment of these kind of programs, including the efficiency increment as an available resource for electric power utilities in Costa Rica, will avoid the implantation of most of combustion plants now planned in current National Electric Power Plant expansion program. (author)

Household appliances using solar energy technology

International Nuclear Information System (INIS)

Gul, H.

2000-01-01

Many solar energy technologies are now sufficiently developed to make it possible to use these to replace some of our conventional energy sources, but still need improvement and reduction in cost. It is, therefore, necessary to focus attention on household uses of solar energy. This paper describes the recent developments and current position in respect of several such devices, which include; solar cooker, with curved concentrator, Panel Cooker, Solar Dryer, solar water heater, Solar Still, Solar Water Pump, Solar Water Disinfection, Solar space Heating and greenhouse solar Reflectors, Development and Extension activities on these should be taken up at various levels. (author)

Electric emissions from electrical appliances

International Nuclear Information System (INIS)

Leitgeb, N.; Cech, R.; Schroettner, J.

2008-01-01

Electric emissions from electric appliances are frequently considered negligible, and standards consider electric appliances to comply without testing. By investigating 122 household devices of 63 different categories, it could be shown that emitted electric field levels do not justify general disregard. Electric reference values can be exceeded up to 11-fold. By numerical dosimetry with homogeneous human models, induced intra-corporal electric current densities were determined and factors calculated to elevate reference levels to accounting for reduced induction efficiency of inhomogeneous fields. These factors were found not high enough to allow generally concluding on compliance with basic restrictions without testing. Electric appliances usually simultaneously emit both electric and magnetic fields exposing almost the same body region. Since the sum of induced current densities is limited, one field component reduces the available margin for the other. Therefore, superposition of electric current densities induced by either field would merit consideration. (authors)

Drinking water pollution with nickel from water boilers; Nickel-Eintrag aus Wasserkochern ins Trinkwasser

Energy Technology Data Exchange (ETDEWEB)

Helmers, E. [Amt fuer Umweltschutz, Stuttgart (Germany). Chemisches Inst.

1998-07-01

The EU is planning to drop the threshold value for nickel in drinking water down to 20 {mu}g/l (present German threshold value: 50 {mu}g/l). Since ICP-MS-screenings of spot checks of water cookers were striking with respect to nickel, emissions of electrical water cookers have been investigated systematically within this study. As a result, water cookers with open heating coils are emitting relevant amounts of nickel into the water while it is brought to the boil. Investigation of eight preused water cookers with open heating coils revealed that the boiled water contained more than 50 {mu}g Ni/l in one case, more than 20 {mu}g Ni/l in two cases and, between 10 and 20 {mu}g Ni/l in two more cases, respectively. Removing of the lime by the aid of citric acid is increasing the nickel concentrations by a factor of up to 50 (max. 640 {mu}g/l). A new device was checked in a long-term test. During standard use with tapwater, Ni concentrations fall below the detection limit of 5 {mu}g Ni/l (120 cooking events). However, after removing of the lime, 5 times of cooking were necessary in order to diminish the Ni concentrations below the limit of 20 {mu}g/l. In the case of dionized water Ni concentrations below the limit of 20 {mu}g/l. In the case of deionized water Ni concentrations remained between 94 und 190 {mu}g/l. Health risk assessment: The intake of nickel with beverages made from hot water out of these cookers is in the range of 26 {mu}g/day. Considering an alltogether dietary nickel intake of 130-170 (900) {mu}g/day, this is not beyond the scope. However, according to the fact that nickel allergies (dermatitis) are very frequent (up to 13% of the population), this source should be limited or closed. (orig.) [Deutsch] Aus Anlass der geplanten Absenkung des Trinkwassergrenzwertes fuer Nickel auf 20 {mu}g/l sowie aufgrund von Auffaelligkeiten bei Stichprobenuntersuchungen wurde das Nickel-Emissionsverhalten von elektrischen Wassererhitzern betrachtet. Hierbei erwies sich

The contribution of renewable energy resources on the electrification and development at the Guantanamo Province

Energy Technology Data Exchange (ETDEWEB)

Perez, S.; Angel, J. [CUBASOLAR, Guantanamo (Cuba); Moreno Figueredo, C. [Centro de Estudio de Tecnologias Energeticas Renovables (Cuba); Montesinos Larrosa, A. [Sociedad Cubana para la Promocion de las Energias Renovables (Cuba)

2008-07-01

Cuba's Guantanamo province is a leader in the application of renewable energy technologies. This paper discussed the socio-economic impact of renewable energy projects that are underway in the Guantanamo province to improve the standard of living in rural areas. More than 400 rural schools and 70 rural medical offices get their electricity from photovoltaic systems. Hydropower provides the energy needs to 3000 rural houses with 11,000 inhabitants. Other applications include remote community solar systems, improved woodstoves for community kitchens, solar cookers and solar dryers. This paper demonstrated how the high penetration of these renewable energy technologies has contributed to the sustainable development of the province. The lessons learned in energy management by the local governments and research institutions were also outlined. 1 tab.

Mountain restaurant 'Kuklos' on the Berneuse: A revolution. Bergrestaurant 'Kuklos' auf der Berneuse: Den Dreh gefunden

Energy Technology Data Exchange (ETDEWEB)

Stadelmann, M

1990-11-01

The restaurant on the Berneuse offers catering possibilities for up to 500 guests on five storeys. Natural gas is used for the energy supply of the complex for heating as well as cooking purposes. For this a central boiler plant with a 420 kW cast iron boiler is located on the topmost storey. The boiler is fired with a gas blower burner. The total power of the cookers, ovens, steamers and microwave ovens installed in the kitchen amounts to approx. 100 kW. As the kilowatt hour rate of natural gas is lower than that of electric power the use of gas appliances result in considerable cost savings in addition to higher flexibility and efficiency, shorter readiness periods and heating-up times. (BWI).

Experimental analysis of a diffusion absorption refrigeration system used alternative energy sources

International Nuclear Information System (INIS)

Soezen, A.; Oezbas, E.

2009-01-01

The continuous-cycle absorption refrigeration device is widely used in domestic refrigerators, and recreational vehicles. It is also used in year-around air conditioning of both homes and larger buildings. The unit consists of four main parts the boiler, condenser, evaporator and the absorber. When the unit operates on kerosene or gas, the heat is supplied by a burner. This element is fitted underneath the central tube. When operating on electricity, the heat is supplied by an element inserted in the pocket. No moving parts are employed. The operation of the refrigerating mechanism is based on Dalton's law. In this study, experimental analysis was performed of a diffusion absorption refrigeration system (DARS) used alternative energy sources such as solar, liquid petroleum gas (LPG) sources. Two basic DAR cycles were set up and investigated: i) In the first cycle (DARS-1), the condensate is sub-cooled prior to the evaporator entrance by the coupled evaporator/gas heat exchanger similar with manufactured by Electrolux Sweden. ii) In the second cycle (DARS-2), the condensate is not sub-cooled prior to the evaporator entrance and gas heat exchanger is separated from the evaporator. (author)

Electricity economics. Production functions with electricity

Energy Technology Data Exchange (ETDEWEB)

Hu, Zhaoguang [State Grid Energy Research Institute, Beijing (China); Hu, Zheng [Delaware Univ., Newark, DE (United States)

2013-07-01

The first book studies on the economics of electricity consumption. Compares the sector production functions with electricity and the commercial production functions with electricity. Introduces the global E-GDP function, the European E-GDP function and 12 national E-GDP functions. Presents the gene characters of EAI production functions and E-GDP functions for USA to see why USA's economy is entering an up-industrialization period. Discusses China's economic growth by production functions with electricity. Electricity Economics: Production Functions with Electricity studies the production output from analyzing patterns of electricity consumption. Since electricity data can be used to measure scenarios of economic performance due to its accuracy and reliability, it could therefore also be used to help scholars explore new research frontiers that directly and indirectly benefits human society. Our research initially explores a similar pattern to substitute the Cobb-Douglas function with the production function with electricity to track and forecast economic activities. The book systematically introduces the theoretical frameworks and mathematical models of economics from the perspective of electricity consumption. The E-GDP functions are presented for case studies of more than 20 developed and developing countries. These functions also demonstrate substantial similarities between human DNA and production functions with electricity in terms of four major characteristics, namely replication, mutation, uniqueness, and evolution. Furthermore, the book includes extensive data and case studies on the U.S., China, Japan, etc. It is intended for scientists, engineers, financial professionals, policy makers, consultants, and anyone else with a desire to study electricity economics as well as related applications.

Electricity economics. Production functions with electricity

International Nuclear Information System (INIS)

Hu, Zhaoguang; Hu, Zheng

2013-01-01

The first book studies on the economics of electricity consumption. Compares the sector production functions with electricity and the commercial production functions with electricity. Introduces the global E-GDP function, the European E-GDP function and 12 national E-GDP functions. Presents the gene characters of EAI production functions and E-GDP functions for USA to see why USA's economy is entering an up-industrialization period. Discusses China's economic growth by production functions with electricity. Electricity Economics: Production Functions with Electricity studies the production output from analyzing patterns of electricity consumption. Since electricity data can be used to measure scenarios of economic performance due to its accuracy and reliability, it could therefore also be used to help scholars explore new research frontiers that directly and indirectly benefits human society. Our research initially explores a similar pattern to substitute the Cobb-Douglas function with the production function with electricity to track and forecast economic activities. The book systematically introduces the theoretical frameworks and mathematical models of economics from the perspective of electricity consumption. The E-GDP functions are presented for case studies of more than 20 developed and developing countries. These functions also demonstrate substantial similarities between human DNA and production functions with electricity in terms of four major characteristics, namely replication, mutation, uniqueness, and evolution. Furthermore, the book includes extensive data and case studies on the U.S., China, Japan, etc. It is intended for scientists, engineers, financial professionals, policy makers, consultants, and anyone else with a desire to study electricity economics as well as related applications.

Urban household energy consumption in Thailand

Energy Technology Data Exchange (ETDEWEB)

Pongsapich, Amara; Wongsekiarttirat, Wathana (Chulalongkorn Univ., Bangkok (Thailand). Social Research Inst.)

1994-05-01

This study was aimed at developing a better understanding of urban household energy consumption in Thailand through a series of in-depth household energy surveys. Households in urban areas used electricity, LPG, charcoal and fuelwood. Traditional biomass fuels such as husk and dung, as well as kerosene, were essentially not used in urban households. Nearly all households used electricity and most households used LPG. Some households used more than one fuel for cooking, particularly LPG and charcoal. There was a great difference in electricity used between the households in Bangkok and other urban areas. Most households in the study areas used LPG stove or burners for cooking. But charcoal stoves were also used by many households for specific culinary purposes. Electric rice-cookers are widely used for convenience. The study suggests that the number of households using charcoal stoves will decrease gradually and fuelwood use will disappear. Saturation rates for refrigerators and colour television sets were very high and air conditioners were common in Bangkok. Some users may be unaware of the benefits of LPG as a cooking fuel. To improve indoor air quality and cooking safety and reduce pressures on forests from commercial fuelwood use, measures to promote LPG should be undertaken. The government should also provide information about efficient appliances and electricity conservation. (Author)

Comparative analysis of two immunohistochemical methods for antigen retrieval in the optical lobe of the honeybee Apis mellifera: Myosin-v assay

Directory of Open Access Journals (Sweden)

LUCIANA KAREN CALÁBRIA

2010-01-01

Full Text Available The present study compared two heating methods currently used for antigen retrieval (AR immunostaining: the microwave oven and the steam cooker. Myosin-V, a molecular motor involved in vesicle transport, was used as a neuronal marker in honeybee Apis mellifera brains fixed in formalin. Overall, the steam cooker showed the most satisfactory AR results. At 100 ºC, tissue morphology was maintained and revealed epitope recovery, while evaporation of the AR solution was markedly reduced; this is important for stabilizing the sodium citrate molarity of the AR buffer and reducing background effects. Standardization of heat-mediated AR of formalin-fixed and paraffin-embedded tissue sections results in more reliable immunostaining of the honeybee brain.

Prices on electricity and transmission of electricity

International Nuclear Information System (INIS)

2003-01-01

This publication contains data on prices of electric energy and transmission of electricity valid from 1 January 2003. The purpose is to illustrate the price changes on the electricity market in terms of prices for different customer categories. All companies holding network concessions for areas and all companies trading in electricity are included in this report, which is produced on an annual basis.The prices for transmission services 1 January 2003 were on the whole unchanged compared to the preceding year. For households the mean annual cost was SEK 882 for flats, SEK 4 335 for one- or two-family houses with electric heating and SEK 1 925 for those without electric heating. Electricity prices rose considerably on 1 January 2003 compared to the year before. The mean price per kWh for households with standard agreements was SEK 0.519 for deliveries to flats, SEK 0.447 for one- or two-family houses with electric heating and SEK 0.471 without electric heating. As a result, the mean annual cost increased by SEK 326 for flats, SEK 3 012 for one- or two-family houses with electric heating, and by SEK 774 for those houses without electric heating. The high costs of electricity may be explained in part by the development on the Nordic Power Exchange (Nord Pool), where the spot price increased by about 290 per cent during 2002 (1 USD is about 8 SEK)

Prices on electricity and transmission of electricity

International Nuclear Information System (INIS)

2002-01-01

This publication contains data on prices of electric energy and transmission of electricity valid on 1 January 2002. The purpose is to illustrate the price changes on the electricity market in terms of prices for different customer categories. All companies holding network concessions for areas and all companies trading in electricity are included in this report, which is produced on an annual basis. The prices for transmission services 1 January 2002 were on the whole unchanged compared to the preceding year. For households the mean annual cost was SEK 856 for flats, SEK 4,194 one- or two-family houses with electric heating and SEK 1,881 without electric heating. (1 SEK ∼ 0.1 USD). Electricity prices rose considerably on 1 January 2002 compared to the year before. The mean price per kWh for households according to standard agreement was SEK 0.356 for deliveries to flats, SEK 0.296 for apartments in one- or two-family houses with electric heating and SEK 0.316 without electric heating. That means that the mean annual cost increased by SEK 171 for flats. For one- or two-family houses with electric heating, costs increased by SEK 1,424, and by SEK 379 for those houses without electric heating. The high costs of electricity may be explained in part by the development on the Nordic Power Exchange (Nord Pool), where the spot price increased by 75 per cent during 2001. The price development for household customers during 1996-2002 is shown in a diagram

On the electricity shortage, price and electricity theft nexus

International Nuclear Information System (INIS)

Jamil, Faisal

2013-01-01

Pakistan is facing severe electricity shortfall of its history since 2006. Several measures have been implemented in order to mitigate electricity shortage. The focus has been on raising the installed capacity of electricity generation and transmission. The present policy results in expensive thermal electricity generation mostly using expensive and environmentally hazardous furnace oil and inability of utilities to recover their cost of supply although there is unprecedented rise in electricity tariffs. This study concentrates on the electricity demand and traces the relationship between electricity shortfalls, tariff rate and electricity theft in the background of recent electricity crisis using the data for the period 1985–2010. We employed the Granger causality test through error correction model and out-of-sample causality through variance decomposition method. Empirical evidence shows that electricity theft greatly influences electricity shortfalls through lowering investment and inefficient use of electricity. The study concludes that electricity crisis cannot be handled without combating rampant electricity theft in the country. - Highlights: ► The study investigates relationship among electricity outages, price and electricity theft. ► It employed Johansen approach, ECM and variance decomposition analysis. ► Empirical evidence shows that electricity theft causes outages and rising tariff rates. ► Variance decomposition analysis results are slightly different from ECM

Agricultural Electricity. Electric Motors. Student Manual.

Science.gov (United States)

Benson, Robert T.

Addressed to the student, this manual, which includes supplementary diagrams, discusses the following topics and principles: Electromagnetic fields, electromagnets, parts of an electric motor, determining speed of an electric motor, types of electric motors in common use (split-phase, capacitor, repulsion-induction, three-phase), the electric…

evaluation of electricity consumer's behaviour towards electricity ...

African Journals Online (AJOL)

Energy efficiency and sustainability: evaluation of electricity consumer's behaviour towards electricity usage and energy conservation. ... Remember me ... particularly about electricity consumer's attitudes, behaviour and practices with respect ...

Electric Vehicle Interaction at the Electrical Circuit Level

Science.gov (United States)

2018-01-01

The objective of the Electric Vehicle Interaction at the Electrical Circuit Level project was to investigate electric vehicle (EV) charging as a means of mitigating transient over-voltages (TOVs) on the circuit level electric utility distribution gri...

Electric and Plug-In Hybrid Electric Fleet Vehicle Testing | Transportation

Science.gov (United States)

Research | NREL Electric and Plug-In Hybrid Electric Fleet Vehicle Evaluations Electric and Plug-In Hybrid Electric Fleet Vehicle Evaluations How Electric and Plug-In Hybrid Electric Vehicles plugging the vehicle into an electric power source. PHEVs are powered by an internal combustion engine that

Performance of Control System Using Microcontroller for Sea Water Circulation

Science.gov (United States)

Indriani, A.; Witanto, Y.; Pratama, A. S.; Supriyadi; Hendra; Tanjung, A.

2018-02-01

Now a day control system is very important rule for any process. Control system have been used in the automatic system. Automatic system can be seen in the industrial filed, mechanical field, electrical field and etc. In industrial and mechanical field, control system are used for control of motion component such as motor, conveyor, machine, control of process made of product, control of system and soon. In electrical field, control system can met for control of electrical system as equipment or part electrical like fan, rice cooker, refrigerator, air conditioner and etc. Control system are used for control of temperature and circulation gas, air and water. Control system of temperature and circulation of water also can be used for fisher community. Control system can be create by using microcontroller, PLC and other automatic program [1][2]. In this paper we will focus on the close loop system by using microcontroller Arduino Mega to control of temperature and circulation of sea water for fisher community. Performance control system is influenced by control equipment, sensor sensitivity, test condition, environment and others. The temperature sensor is measured using the DS18S20 and the sea water clarity sensor for circulation indicator with turbidity sensor. From the test results indicated that this control system can circulate sea water and maintain the temperature and clarity of seawater in a short time.

Electric power production contra electricity savings

International Nuclear Information System (INIS)

Schleisner, L.; Grohnheit, P.E.; Soerensen, H.

1991-01-01

The expansion of electricity-producing plants has, in Denmark until now, taken place in accordance with the demand for electricity. Recently, it has been suggested that the cost of the further development of such systems is greater than the cost of instigating and carrying out energy conservation efforts. The aim of the project was to evaluate the consequences for power producing plants of a reduction of the electricity consumption of end-users. A method for the analysis of the costs involved in the system and operation of power plants contra the costs that are involved in saving electricity is presented. In developing a model of this kind, consideration is given to the interplay of the individual saving project and the existing or future electricity supply. Thus it can be evaluated to what extent it would be advisable to substitute investments in the development of the capacity of the power plants with investments in the reduction of electricity consumption by the end users. This model is described in considerable detail. It will be tested in representative situations and locations throughout the Nordic countries. (AB) 17 refs

Starchy material for alcoholic fermentation

Energy Technology Data Exchange (ETDEWEB)

Malchenko, A L

1957-10-25

The material is cooked in pressure cookers until almost white, then seasoned and ground before usual further treatment. The grinding can be done either before the first or the second stage of saccharification.

Electric-drive tractability indicator integrated in hybrid electric vehicle tachometer

Science.gov (United States)

Tamai, Goro; Zhou, Jing; Weslati, Feisel

2014-09-02

An indicator, system and method of indicating electric drive usability in a hybrid electric vehicle. A tachometer is used that includes a display having an all-electric drive portion and a hybrid drive portion. The all-electric drive portion and the hybrid drive portion share a first boundary which indicates a minimum electric drive usability and a beginning of hybrid drive operation of the vehicle. The indicated level of electric drive usability is derived from at least one of a percent battery discharge, a percent maximum torque provided by the electric drive, and a percent electric drive to hybrid drive operating cost for the hybrid electric vehicle.

Electricity consumption and electricity saving in the Swedish households

Energy Technology Data Exchange (ETDEWEB)

Bernstroem, B M; Eklund, Y; Sjoeberg, L

1997-03-01

The objective of the present study is to determine which factors influence electricity consumption behavior of Swedish households, the level of knowledge about electricity use and the willingness to pay for the use of electricity. In Sweden, as in many other developed countries, the need for electric power is constantly increasing. The major reason for this increase in electricity consumption is the lifestyle of a modern society. A feature in the nuclear power discussion is that the government in Sweden is having a hard time to establish how to phase-out all nuclear power plants by 2010. An additional major change in Swedish energy policy is the deregulation of the electricity market, which started in the beginning of 1996. There is an increased demand for strategies to save electricity among households. The results of this study stress the difficulties in reducing electricity consumption and to develop new electricity saving strategies in Sweden 125 refs, 6 figs, 21 tabs

Electric vehicles

Science.gov (United States)

1990-03-01

Quiet, clean, and efficient, electric vehicles (EVs) may someday become a practical mode of transportation for the general public. Electric vehicles can provide many advantages for the nation's environment and energy supply because they run on electricity, which can be produced from many sources of energy such as coal, natural gas, uranium, and hydropower. These vehicles offer fuel versatility to the transportation sector, which depends almost solely on oil for its energy needs. Electric vehicles are any mode of transportation operated by a motor that receives electricity from a battery or fuel cell. EVs come in all shapes and sizes and may be used for different tasks. Some EVs are small and simple, such as golf carts and electric wheel chairs. Others are larger and more complex, such as automobile and vans. Some EVs, such as fork lifts, are used in industries. In this fact sheet, we will discuss mostly automobiles and vans. There are also variations on electric vehicles, such as hybrid vehicles and solar-powered vehicles. Hybrid vehicles use electricity as their primary source of energy, however, they also use a backup source of energy, such as gasoline, methanol or ethanol. Solar-powered vehicles are electric vehicles that use photovoltaic cells (cells that convert solar energy to electricity) rather than utility-supplied electricity to recharge the batteries. These concepts are discussed.

Electrical field of electrical appliances versus distance: A preliminary analysis

International Nuclear Information System (INIS)

Mustafa, Nur Badariah Ahmad; Nordin, Farah Hani; Ismail, Fakaruddin Ali Ahmad; Alkahtani, Ammar Ahmed; Balasubramaniam, Nagaletchumi; Hock, Goh Chin; Shariff, Z A M

2013-01-01

Every household electrical appliance that is plugged in emits electric field even if it is not operating. The source where the appliance is plugged into and the components of household electrical appliance contribute to electric field emission. The electric field may cause unknown disturbance to the environment or also affect the human health and the effect might depends on the strength of the electric field emitted by the appliance. This paper will investigate the strength of the electric field emitted by four different electrical appliances using spectrum analyser. The strength will be captured at three different distances; (i) 1m (ii) 2m and (iii) 3m and analysis of the strength of the electrical field is done based on the three different distances. The measurement results show that the strength of the electric field is strongest when it is captured at 1m and the weakest at 3m from the electrical appliance. The results proved that the farther an object is located from the electrical appliance; the less effect the magnetic field has.

Pricing electricity for sustainability : climate change and Canada's electricity sector

International Nuclear Information System (INIS)

2010-01-01

The electricity sector is Canada's largest single source of greenhouse gas (GHG) emissions. This paper discussed electricity and carbon pricing approaches to reducing GHG emissions in the electricity sector. An overview of the links between electricity pricing and climate change was presented, and current and emerging trends in electricity pricing related to encouraging energy conservation were reviewed. Market prices and failures were discussed. Approaches to pricing electricity included an increase in block prices; time-of-use prices; demand-side management and energy efficiency; and carbon pricing in Canada and electricity pricing signals. The study showed that several provincial utilities in Canada are experimenting with market-based pricing approaches for electricity and carbon that may help to reduce GHG emissions over time. Concerns over electricity supply and the negative environmental impacts of electricity production may lead to the full social pricing of electricity in some regions of Canada. 46 refs., 3 tabs., 5 figs.

AutoCAD electrical 2013 for electrical control designers

CERN Document Server

Tickoo, Sham; CADCIM Technologies

2013-01-01

The AutoCAD Electrical 2013 for Electrical Control Designers textbook has been written to assist the engineering students and the practicing designers learn the application of various AutoCAD Electrical tools and options for creating electrical control designs. After reading this textbook, the users will be able to create professional electrical-control drawings easily and effectively. Moreover, the users will be able to automate various control engineering tasks such as building circuits, numbering wires, creating bills of materials, and many more. The textbook takes the users across a wide spectrum of electrical control drawings through progressive examples and numerous illustrations and exercises, thereby making it an ideal guide for both the novice and the advanced users. Salient Features of the Textbook Consists of 14 chapters that are organized in a pedagogical sequence covering various tools and features of AutoCAD Electrical such as schematic drawings, parametric and non-parametric PLC modules, Circu...

Electric circuit theory applied electricity and electronics

CERN Document Server

Yorke, R

1981-01-01

Electric Circuit Theory provides a concise coverage of the framework of electrical engineering. Comprised of six chapters, this book emphasizes the physical process of electrical engineering rather than abstract mathematics. Chapter 1 deals with files, circuits, and parameters, while Chapter 2 covers the natural and forced response of simple circuit. Chapter 3 talks about the sinusoidal steady state, and Chapter 4 discusses the circuit analysis. The fifth chapter tackles frequency response of networks, and the last chapter covers polyphase systems. This book will be of great help to electrical

Assessment of Human Exposure to Magnetic Fields Produced by Domestic Appliances (invited paper)

International Nuclear Information System (INIS)

Preece, A.W.; Kaune, W.T.; Grainger, P.; Golding, J.

1999-01-01

A study of 50 homes and their appliances examined whether a detailed appliance-use questionnaire and survey would yield data comparable with direct personal monitoring. This was coupled with direct measurement of the appliances in use to determine the field at 50 cm and 1 m. The findings were that individual time-weighted average (TWA) exposures calculated from questionnaire and activity diaries in conjunction with the appliance magnetic field were unrelated to actual personal exposure measurement. It was concluded that questionnaires are of little or no value for TWA estimation. However, peak exposure and short-term temporal variability could be modelled in subjects spending at least 15 min per day within 1 m of an operating microwave cooker or conventional cooker. This method could be extended to other appliances. (author)

Liquefied Petroleum Gases (LPG) and the fight against deforestation: the Senegal example

International Nuclear Information System (INIS)

Boubacar, B.

1993-01-01

Domestic LPG consumption in Senegal is over 40,000 tonnes in 1992, thus preserving more than 33,000 hectares of forest. Three reasons explain the success of the 'butanization' policy implemented by the country in its fight against deforestation: political desire, constant cooperation between the public authorities and distributors, but also a supply of gas and inexpensive cookers. The penetration of these butane cookers on the market occurred mainly in urban areas (it is the leading household appliance of urban families in Senegal), but it is also quite visible in rural areas as well, explained Mr. Boubacar Barry General Manager of Totalgaz Senegal in his speech 'How to fight the Growing Desert with Simple Means and a little imagination' during the 6th World LPG Meeting last October in Marrakech. 2 figs., 3 photos

The electric motor handbook

Energy Technology Data Exchange (ETDEWEB)

Hurst, R.W.; Feltham, P. (eds.)

2004-05-01

This handbook outlines the important role that electric motors play in modern society. It covers the field of motor applications from various motor types to their use and repair. It also presents practical applications of electric motors and methods on motor efficiency. More than half of all electricity generated, and 75 per cent of all industrial electricity consumption is consumed by electric motors. Electrical personnel must be aware of all factors involved in electric motors in order to choose and apply the appropriate size of electric motor. These factors include efficiency, sizing and proper application. The efficient use and maximum life expectancy of electric motors depends on proper motor protection, control and maintenance. This handbook includes articles from leading experts on electric motors in modern electrical systems. The content includes: design considerations; proper electric motor sizing techniques; optimal electric motor application; electric motor protection technology; electric motor control principles; electric motor maintenance and troubleshooting; induction electric motors; electric motor bearing currents; electric motor bearing lubrication; electromagnetism; electric motor enclosures; electric motor testing; electric motor repair; DC electric motor; electric motor starters; electric motor brushes; industrial electric motors; electric motor diagrams; AC electric motors; electric motor wiring; electric motor service; electric motor rewinding; electric motor winding; diagram of electric motor wiring; electric motor kit; and, troubleshooting electric motors. A directory of motor manufacturers and suppliers was also included. refs., tabs., figs.

Electricity market 2001

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-01

The electricity markets in the Nordic countries have undergone major changes since the electricity market reform work was started in the early 1990s. Sweden, Norway and Finland have had a common electricity market since 1996. The work of also reforming the Danish electricity market was begun in the year 2000. The objective of the electricity market reform is to introduce increased competition, to give the consumers greater freedom of choice and also, by open and expanded trade in electricity, create the conditions for efficient pricing. The Swedish National Energy Administration is the supervisory authority as specified in the Electricity Act, and one of the tasks entrusted to it by the Government is to follow developments on the electricity market and to regularly compile and report current market information. The purpose of the 'Electricity market 2001' publication is to meet the need for generalized and readily accessible information on the conditions on the Nordic market. Iceland is not included in the description. The publication also includes summaries of information from recent years concerning electricity generation and utilization in the Nordic countries, the structure of the electricity market from the players' perspective, trade in electricity in the Nordic countries and in Northern Europe, electricity prices in the Nordic and other countries, and the impact of the electricity sector on the environment. The publication contains data on electricity generation and use during the past years, structure of the electricity market, trade in electricity in the Nordic countries and northern Europe, electricity prices in the Nordic countries and other countries as well as impact of electricity generation system on the environment.

Electricity market 2001

International Nuclear Information System (INIS)

2001-09-01

The electricity markets in the Nordic countries have undergone major changes since the electricity market reform work was started in the early 1990s. Sweden, Norway and Finland have had a common electricity market since 1996. The work of also reforming the Danish electricity market was begun in the year 2000. The objective of the electricity market reform is to introduce increased competition, to give the consumers greater freedom of choice and also, by open and expanded trade in electricity, create the conditions for efficient pricing. The Swedish National Energy Administration is the supervisory authority as specified in the Electricity Act, and one of the tasks entrusted to it by the Government is to follow developments on the electricity market and to regularly compile and report current market information. The purpose of the 'Electricity market 2001' publication is to meet the need for generalized and readily accessible information on the conditions on the Nordic market. Iceland is not included in the description. The publication also includes summaries of information from recent years concerning electricity generation and utilization in the Nordic countries, the structure of the electricity market from the players' perspective, trade in electricity in the Nordic countries and in Northern Europe, electricity prices in the Nordic and other countries, and the impact of the electricity sector on the environment. The publication contains data on electricity generation and use during the past years, structure of the electricity market, trade in electricity in the Nordic countries and northern Europe, electricity prices in the Nordic countries and other countries as well as impact of electricity generation system on the environment

Electric drives

CERN Document Server

Boldea, Ion

2005-01-01

ENERGY CONVERSION IN ELECTRIC DRIVESElectric Drives: A DefinitionApplication Range of Electric DrivesEnergy Savings Pay Off RapidlyGlobal Energy Savings Through PEC DrivesMotor/Mechanical Load MatchMotion/Time Profile MatchLoad Dynamics and StabilityMultiquadrant OperationPerformance IndexesProblemsELECTRIC MOTORS FOR DRIVESElectric Drives: A Typical ConfigurationElectric Motors for DrivesDC Brush MotorsConventional AC MotorsPower Electronic Converter Dependent MotorsEnergy Conversion in Electric Motors/GeneratorsPOWER ELECTRONIC CONVERTERS (PECs) FOR DRIVESPower Electronic Switches (PESs)The

Electricity Theory

International Nuclear Information System (INIS)

Gong, Ha Soung

2006-12-01

The text book composed of five parts, which are summary of this book, arrangement of electricity theory including electricity nad magnetism, a direct current, and alternating current. It has two dictionary electricity terms for a synonym. The last is an appendix. It is for preparing for test of officer, electricity engineer and fire fighting engineer.

Electric Motor-Generator for a Hybrid Electric Vehicle

OpenAIRE

Odvářka, Erik; Mebarki, Abdeslam; Gerada, David; Brown, Neil; Ondrůšek, Čestmír

2009-01-01

Several topologies of electrical machines can be used to meet requirements for application in a hybrid electric vehicle. This paper describes process of an electric motor-generator selection, considering electromagnetic, thermal and basic control design. The requested electrical machine must develop 45 kW in continuous operation at 1300 rpm with field weakening capability up to 2500 rpm. Both radial and axial flux topologies are considered as potential candidates. A family of axial flux machi...

Electrical contracting

CERN Document Server

Neidle, Michael

2013-01-01

Electrical Contracting, Second Edition is a nine-chapter text guide for the greater efficiency in planning and completing installations for the design, installation and control of electrical contracts. This book starts with a general overview of the efficient cabling and techniques that must be employed for safe wiring design, as well as the cost estimation of the complete electrical contract. The subsequent chapters are devoted to other electrical contracting requirements, including electronic motor control, lighting, and electricity tariffs. A chapter focuses on the IEE Wiring Regulations an

F I N A L CS1_31012007.indd

African Journals Online (AJOL)

It explains advantages and disadvantages of solar cook- ing and the ... rural areas by using renewable energies. ... Teaching the population to use the solar cooker .... Translation to English by: Michael Spiess, Albisstrasse 37, CH-8038 Zurich,.

Research Article Special Issue

African Journals Online (AJOL)

pc

2018-03-07

Mar 7, 2018 ... The relationship between tourism and the environment is complex [7]. ... marketing to a customer focused approach with databases and measurable ways to ... had the experience representing their schools in “Green Cooker ...

30 CFR 77.500 - Electric power circuits and electric equipment; deenergization.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electric power circuits and electric equipment... OF UNDERGROUND COAL MINES Electrical Equipment-General § 77.500 Electric power circuits and electric equipment; deenergization. Power circuits and electric equipment shall be deenergized before work is done on...

Electric-Drive Vehicles

Energy Technology Data Exchange (ETDEWEB)

Septon, Kendall K [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-11

Electric-drive vehicles use electricity as their primary fuel or to improve the efficiency of conventional vehicle designs. These vehicles can be divided into three categories: Hybrid electric vehicles (HEVs), Plug-in hybrid electric vehicles (PHEVs), All-electric vehicles (EVs). Together, PHEVs and EVs can also be referred to as plug-in electric vehicles (PEVs).

Electric-Drive Vehicles

Energy Technology Data Exchange (ETDEWEB)

None

2017-09-01

Electric-drive vehicles use electricity as their primary fuel or to improve the efficiency of conventional vehicle designs. These vehicles can be divided into three categories: Hybrid electric vehicles (HEVs), Plug-in hybrid electric vehicles (PHEVs), All-electric vehicles (EVs). Together, PHEVs and EVs can also be referred to as plug-in electric vehicles (PEVs).

Electric vehicle system for charging and supplying electrical power

Science.gov (United States)

Su, Gui Jia

2010-06-08

A power system that provides power between an energy storage device, an external charging-source/load, an onboard electrical power generator, and a vehicle drive shaft. The power system has at least one energy storage device electrically connected across a dc bus, at least one filter capacitor leg having at least one filter capacitor electrically connected across the dc bus, at least one power inverter/converter electrically connected across the dc bus, and at least one multiphase motor/generator having stator windings electrically connected at one end to form a neutral point and electrically connected on the other end to one of the power inverter/converters. A charging-sourcing selection socket is electrically connected to the neutral points and the external charging-source/load. At least one electronics controller is electrically connected to the charging-sourcing selection socket and at least one power inverter/converter. The switch legs in each of the inverter/converters selected by the charging-source/load socket collectively function as a single switch leg. The motor/generators function as an inductor.

Electric engineering introduction

International Nuclear Information System (INIS)

An, Byeong Won; Eom, Sang Ho

1999-03-01

It is divided into nine chapters, which includes electricity theory such as structure of material and current, nature of electricity, static, magnetic force and magnetic attraction, attraction of current and a storage battery, electric circuit on a direct current circuit, single phase circuit and 3-phase current circuit electricity machine like DC generator, DC motor, alternator, electric transformer, single-phase induction motor, 3-phase induction motor, synchronous motor, synchro electric machine, semiconductor such as diode, transistor, FET, UJT, silicon symmetrical switch, electronic circuit like smoothing circuit and Bistable MV. circuit, automatic control, measurement of electricity, electric application and safety.

Electric organ discharges and electric images during electrolocation

Science.gov (United States)

Assad, C.; Rasnow, B.; Stoddard, P. K.

1999-01-01

Weakly electric fish use active electrolocation - the generation and detection of electric currents - to explore their surroundings. Although electrosensory systems include some of the most extensively understood circuits in the vertebrate central nervous system, relatively little is known quantitatively about how fish electrolocate objects. We believe a prerequisite to understanding electrolocation and its underlying neural substrates is to quantify and visualize the peripheral electrosensory information measured by the electroreceptors. We have therefore focused on reconstructing both the electric organ discharges (EODs) and the electric images resulting from nearby objects and the fish's exploratory behaviors. Here, we review results from a combination of techniques, including field measurements, numerical and semi-analytical simulations, and video imaging of behaviors. EOD maps are presented and interpreted for six gymnotiform species. They reveal diverse electric field patterns that have significant implications for both the electrosensory and electromotor systems. Our simulations generated predictions of the electric images from nearby objects as well as sequences of electric images during exploratory behaviors. These methods are leading to the identification of image features and computational algorithms that could reliably encode electrosensory information and may help guide electrophysiological experiments exploring the neural basis of electrolocation.

Economic analysis of electric heating based on critical electricity price

Science.gov (United States)

Xie, Feng; Sun, Zhijie; Zhou, Xinnan; Fu, Chengran; Yang, Jie

2018-06-01

The State Grid Corporation of China proposes an alternative energy strategy, which will make electric heating an important task in the field of residential electricity consumption. This article takes this as the background, has made the detailed introduction to the inhabitant electric heating technology, and take the Zhangjiakou electric panels heating technology as an example, from the expense angle, has carried on the analysis to the electric panels heating economy. In the field of residential heating, electric panels operating costs less than gas boilers. After customers implying energy-saving behavior, electric panels operating cost is even lower than coal-fired boilers. The critical price is higher than the execution price, which indicates that the economic performance of the electric panels is significantly higher than that of the coal boiler.

Electricity market 2000

Energy Technology Data Exchange (ETDEWEB)

Korsfeldt, T.; Petsala, B.

2000-08-01

The electricity markets in the Nordic countries have undergone major changes since the electricity market reform work was started in the early 1990s. Sweden, Norway and Finland have a common electricity market since 1996.The work of also reforming the Danish electricity market was begun in the year 2000. The objective of the electricity market reform is to introduce increased competition,to give the consumers greater freedom of choice and also, by open and expanded trade in electricity, create the conditions for efficient pricing. The Swedish National Energy Administration is the supervisory authority as specified in the Electricity Act, and one of the tasks entrusted to it by the Government is to follow developments on the electricity market and to regularly compile and report current market information. The purpose of the present publication is to meet the need for generalized and readily accessible information on the conditions on the Nordic markets.The publication includes summaries of information from recent years concerning electricity generation and utilization in the Nordic countries, the structure of the electricity market from the players' perspective trade in electricity in the Nordic countries and in Northern Europe, electricity prices in the Nordic and other countries, and the impact of the electricity sector on the environment.

Electricity market 2000

International Nuclear Information System (INIS)

Korsfeldt, T.; Petsala, B.

2000-08-01

The electricity markets in the Nordic countries have undergone major changes since the electricity market reform work was started in the early 1990s. Sweden, Norway and Finland have a common electricity market since 1996.The work of also reforming the Danish electricity market was begun in the year 2000. The objective of the electricity market reform is to introduce increased competition,to give the consumers greater freedom of choice and also, by open and expanded trade in electricity, create the conditions for efficient pricing. The Swedish National Energy Administration is the supervisory authority as specified in the Electricity Act, and one of the tasks entrusted to it by the Government is to follow developments on the electricity market and to regularly compile and report current market information. The purpose of the present publication is to meet the need for generalized and readily accessible information on the conditions on the Nordic markets.The publication includes summaries of information from recent years concerning electricity generation and utilization in the Nordic countries, the structure of the electricity market from the players' perspective trade in electricity in the Nordic countries and in Northern Europe, electricity prices in the Nordic and other countries, and the impact of the electricity sector on the environment

Electric Potential and Electric Field Imaging with Applications

Science.gov (United States)

Generazio, Ed

2016-01-01

The technology and techniques for remote quantitative imaging of electrostatic potentials and electrostatic fields in and around objects and in free space is presented. Electric field imaging (EFI) technology may be applied to characterize intrinsic or existing electric potentials and electric fields, or an externally generated electrostatic field may be used for (illuminating) volumes to be inspected with EFI. The baseline sensor technology, electric field sensor (e-sensor), and its construction, optional electric field generation (quasistatic generator), and current e-sensor enhancements (ephemeral e-sensor) are discussed. Demonstrations for structural, electronic, human, and memory applications are shown. This new EFI capability is demonstrated to reveal characterization of electric charge distribution, creating a new field of study that embraces areas of interest including electrostatic discharge mitigation, crime scene forensics, design and materials selection for advanced sensors, dielectric morphology of structures, inspection of containers, inspection for hidden objects, tether integrity, organic molecular memory, and medical diagnostic and treatment efficacy applications such as cardiac polarization wave propagation and electromyography imaging.

AutoCAD electrical 2016 for electrical control designers

CERN Document Server

Tickoo, Sham

2016-01-01

The AutoCAD Electrical 2016 for Electrical Control Designers textbook has been written to assist the engineering students and the practicing designers who are new to AutoCAD Electrical. Using this textbook, the readers can learn the application of basic tools required for creating professional electrical control drawings with the help of AutoCAD Electrical. Keeping in view the varied requirements of the users, this textbook covers a wide range of tools and features such as schematic drawings, Circuit Builder, panel drawings, parametric and nonparametric PLC modules, stand-alone PLC I/O points, ladder diagrams, point-to-point wiring diagrams, report generation, creation of symbols, and so on. This will help the readers to create electrical drawings easily and effectively. Special emphasis has been laid on the introduction of concepts, which have been explained using text and supported with graphical examples. The examples and tutorials used in this book ensure that the users can relate the information provided...

Electricity

CERN Document Server

Basford, Leslie

2013-01-01

Electricity Made Simple covers the fundamental principles underlying every aspect of electricity. The book discusses current; resistance including its measurement, Kirchhoff's laws, and resistors; electroheat, electromagnetics and electrochemistry; and the motor and generator effects of electromagnetic forces. The text also describes alternating current, circuits and inductors, alternating current circuits, and a.c. generators and motors. Other methods of generating electromagnetic forces are also considered. The book is useful for electrical engineering students.

Electrical installations technology

CERN Document Server

Whitfield, J F

1968-01-01

Electrical Installations Technology covers the syllabus of the City and Guilds of London Institute course No. 51, the "Electricians B Certificate”. This book is composed of 15 chapters that deal with basic electrical science and electrical installations. The introductory chapters discuss the fundamentals and basic electrical principles, including the concept of mechanics, heat, magnetic fields, electric currents, power, and energy. These chapters also explore the atomic theory of electric current and the electric circuit, conductors, and insulators. The subsequent chapter focuses on the chemis

Long-term impacts of battery electric vehicles on the German electricity system

Science.gov (United States)

Heinrichs, H. U.; Jochem, P.

2016-05-01

The emerging market for electric vehicles gives rise to an additional electricity demand. This new electricity demand will affect the electricity system. For quantifying those impacts a model-based approach, which covers long-term time horizons is necessary in order to consider the long lasting investment paths in electricity systems and the market development of electric mobility. Therefore, we apply a bottom-up electricity system model showing a detailed spatial resolution for different development paths of electric mobility in Germany until 2030. This model is based on a linear optimization which minimizes the discounted costs of the electricity system. We observe an increase of electricity exchange between countries and electricity generated by renewable energy sources. One major result turns out to be that electric vehicles can be integrated in the electricity system without increasing the system costs when a controlled (postponing) charging strategy for electric vehicles is applied. The impact on the power plant portfolio is insignificant. Another important side effect of electric vehicles is their substantial contribution to decreasing CO2 emissions of the German transport sector. Hence, electric mobility might be an integral part of a sustainable energy system of tomorrow.

Accelerated stress testing of terrestrial solar cells

Science.gov (United States)

Lathrop, J. W.; Hawkins, D. C.; Prince, J. L.; Walker, H. A.

1982-01-01

The development of an accelerated test schedule for terrestrial solar cells is described. This schedule, based on anticipated failure modes deduced from a consideration of IC failure mechanisms, involves bias-temperature testing, humidity testing (including both 85-85 and pressure cooker stress), and thermal-cycle thermal-shock testing. Results are described for 12 different unencapsulated cell types. Both gradual electrical degradation and sudden catastrophic mechanical change were observed. These effects can be used to discriminate between cell types and technologies relative to their reliability attributes. Consideration is given to identifying laboratory failure modes which might lead to severe degradation in the field through second quadrant operation. Test results indicate that the ability of most cell types to withstand accelerated stress testing depends more on the manufacturer's design, processing, and worksmanship than on the particular metallization system. Preliminary tests comparing accelerated test results on encapsulated and unencapsulated cells are described.

Analyse technico-économique et évaluation de l’impact environnemental de la cuisson solaire directe au Maroc

Directory of Open Access Journals (Sweden)

Ndiaga MBODJI

2017-09-01

Full Text Available The objective of this study is to present a design methodology, carry out economic analysis and evaluate the environmental impact of direct solar cooking systems in Morocco. To satisfy the energy needs of a 5 people household, consuming a 3 kg meal at noon for a cooking time of 2.5 hours, a parabolic concentrator having a diameter of 1.4 m (useful area of 1.6 m² is required. At the household level, the economic analysis revealed that the payback period of a direct solar cooker compared to butane varies from 4 to 10 years, depending on the rate of public subsidy. Where firewood is used, the payback period varies from 0.6 to 10 years, depending on the stove performance and the firewood price. At the national level, a 50% subsidy of direct solar cookers with a penetration rate of 50% in rural areas requires a budget of 1.61 billion dirhams (1$US=10 Dirhams. This investment will allow the government to save 185 million dirhams a year in butane subsidies reduction, which corresponds to a payback period of about 8.7 years and a total profit of 1.45 billion dirhams over the cookers 15-year lifetime. On the ecological aspect, the area of forest saved would be about 10 000 ha/year, and the annual amount of CO2 emissions avoided would be 1.08 Mt/year.

Indoor air pollution from gas cooking and infant neurodevelopment.

Science.gov (United States)

Vrijheid, Martine; Martinez, David; Aguilera, Inma; Bustamante, Mariona; Ballester, Ferran; Estarlich, Marisa; Fernandez-Somoano, Ana; Guxens, Mònica; Lertxundi, Nerea; Martinez, M Dolores; Tardon, Adonina; Sunyer, Jordi

2012-01-01

Gas cooking is a main source of indoor air pollutants, including nitrogen dioxide and particles. Because concerns are emerging for neurodevelopmental effects of air pollutants, we examined the relationship between indoor gas cooking during pregnancy and infant neurodevelopment. Pregnant mothers were recruited between 2004 and 2008 to a prospective birth cohort study (INfancia y Medio Ambiente) in Spain during the first trimester of pregnancy. Third-trimester questionnaires collected information about the use of gas appliances at home. At age 11 to 22 months, children were assessed for mental development using the Bayley Scales of Infant Development. Linear regression models examined the association of gas cooking and standardized mental development scores (n = 1887 mother-child pairs). Gas cookers were present in 44% of homes. Gas cooking was related to a small decrease in the mental development score compared with use of other cookers (-2.5 points [95% confidence interval = -4.0 to -0.9]) independent of social class, maternal education, and other measured potential confounders. This decrease was strongest in children tested after the age of 14 months (-3.1 points [-5.1 to -1.1]) and when gas cooking was combined with less frequent use of an extractor fan. The negative association with gas cooking was relatively consistent across strata defined by social class, education, and other covariates. This study suggests a small adverse effect of indoor air pollution from gas cookers on the mental development of young children.

Effect of different home-cooking methods on the bioaccessibility of zinc and iron in conventionally bred cowpea (Vigna unguiculata L. Walp) consumed in Brazil.

Science.gov (United States)

Pereira, Elenilda J; Carvalho, Lucia M J; Dellamora-Ortiz, Gisela M; Cardoso, Flávio S N; Carvalho, José L V

2016-01-01

The cowpea (Vigna unguiculata L. Wap.) is an excellent source of iron and zinc. However, iron from plant sources is poorly absorbed compared with iron from animal sources. The objective of this study was to evaluate iron and zinc bioaccessibility in cowpea cultivars after processing. Zinc and iron bioaccessibilities in cowpea samples were determined based on an in vitro method involving simulated gastrointestinal digestion with suitable modifications. When water-soaked beans were cooked in a regular pan, the highest percentage of bioaccessible iron obtained was 8.92%, whereas when they were cooked in a pressure cooker without previous soaking, the highest percentage was 44.33%. Also, the percentage of bioaccessible zinc was 52.78% when they were cooked in a regular pan without prior soaking. Higher percentages of bioaccessible iron were found when cooking was done in a pressure cooker compared with regular pan cooking. In all cultivars, cooking of cowpea beans in both pressure cooker and in a regular pan yielded higher percentages of bioaccessible zinc compared with availability of bioaccessible iron. Iron bioaccessibility values suggest that cooking in a regular pan did not have a good effect on iron availability, since the percentage of bioaccessible iron was lower than that of zinc. The determination of iron and zinc bioaccessibility makes it possible to find out the actual percentage of absorption of such minerals and allows the development of efficient strategies for low-income groups to access foods with high levels of these micronutrients.

Electrical appliance energy consumption control methods and electrical energy consumption systems

Science.gov (United States)

Donnelly, Matthew K [Kennewick, WA; Chassin, David P [Pasco, WA; Dagle, Jeffery E [Richland, WA; Kintner-Meyer, Michael [Richland, WA; Winiarski, David W [Kennewick, WA; Pratt, Robert G [Kennewick, WA; Boberly-Bartis, Anne Marie [Alexandria, VA

2006-03-07

Electrical appliance energy consumption control methods and electrical energy consumption systems are described. In one aspect, an electrical appliance energy consumption control method includes providing an electrical appliance coupled with a power distribution system, receiving electrical energy within the appliance from the power distribution system, consuming the received electrical energy using a plurality of loads of the appliance, monitoring electrical energy of the power distribution system, and adjusting an amount of consumption of the received electrical energy via one of the loads of the appliance from an initial level of consumption to an other level of consumption different than the initial level of consumption responsive to the monitoring.

Electrical appliance energy consumption control methods and electrical energy consumption systems

Science.gov (United States)

Donnelly, Matthew K [Kennewick, WA; Chassin, David P [Pasco, WA; Dagle, Jeffery E [Richland, WA; Kintner-Meyer, Michael [Richland, WA; Winiarski, David W [Kennewick, WA; Pratt, Robert G [Kennewick, WA; Boberly-Bartis, Anne Marie [Alexandria, VA

2008-09-02

Electrical appliance energy consumption control methods and electrical energy consumption systems are described. In one aspect, an electrical appliance energy consumption control method includes providing an electrical appliance coupled with a power distribution system, receiving electrical energy within the appliance from the power distribution system, consuming the received electrical energy using a plurality of loads of the appliance, monitoring electrical energy of the power distribution system, and adjusting an amount of consumption of the received electrical energy via one of the loads of the appliance from an initial level of consumption to an other level of consumption different than the initial level of consumption responsive to the monitoring.

30 CFR 75.509 - Electric power circuit and electric equipment; deenergization.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electric power circuit and electric equipment... LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Electrical Equipment-General § 75.509 Electric power circuit and electric equipment; deenergization. [Statutory Provisions] All...

Virtual Power Plants of Electric Vehicles in Sustainable Smart Electricity Markets

NARCIS (Netherlands)

M.T. Kahlen (Micha)

2017-01-01

markdownabstractThe batteries of electric vehicles can be used as Virtual Power Plants to balance out frequency deviations in the electricity grid. Carsharing fleet owners have the options to charge an electric vehicle's battery, discharge an electric vehicle's battery, or keep an electric vehicle

Electric Car Special

Energy Technology Data Exchange (ETDEWEB)

Zoethout, T.; Belin, H.; Verwijs, H.; Nicola, S.; De Saint Jacob, Y.; Gatermann, R.

2009-09-15

In six articles, two columns and two interviews a part of this issue is dedicated to electric car developments: about winners and losers in the electric car race; a unique business model to rolling out the electric car by the electric battery company Better Place and the automobile industry Renault Nissan; interview with entrepreneur Shai Agassi of the Indian company Better Place; the development of electric cars in Germany; interview with Jean-Jacques Chanaron, an economist specialising in innovation management and a firm believer in electric cars; start of mass production of electric vehicles at the Japanese Nissan automobile industry; the constraints in Sweden in developing fuel-efficient automobiles; plans for 1 million electric or hybrid cars by 2025 in the Netherlands.

Electrical transformer handbook

Energy Technology Data Exchange (ETDEWEB)

Hurst, R.W.; Horne, D. (eds.)

2005-07-01

This handbook is a valuable user guide intended for electrical engineering and maintenance personnel, electrical contractors and electrical engineering students. It provides current information on techniques and technologies that can help extend the life of transformers. It discusses transformer testing, monitoring, design, commissioning, retrofitting and other elements involved in keeping electrical transformers in safe and efficient operation. It demonstrates how a power transformer can be put to use and common problems faced by owners. In addition to covering control techniques, testing and maintenance procedures, this handbook covers the power transformer; control electrical power transformer; electrical power transformer; electrical theory transformer; used electrical transformer; down electrical step transformer; electrical manufacturer transformer; electrical picture transformer; electrical transformer work; electrical surplus transformer; current transformer; step down transformer; voltage transformer; step up transformer; isolation transformer; low voltage transformer; toroidal transformer; high voltage transformer; and control power transformer. The handbook includes articles from leading experts on overcurrent protection of transformers; ventilated dry-type transformers; metered load factors for low-voltage, and dry-type transformers in buildings. The maintenance of both dry-type or oil-filled transformers was discussed with reference to sealing, gaskets, oils, moisture and testing. The adoption of dynamic load practices was also discussed along with the reclamation or recycling of used lube oil, transformer dielectric fluids and aged solid insulation. A buyer's guide and directory of transformer manufacturers and suppliers was also included. refs., tabs., figs.

Soil-water retention curve and beginning of monitoring in Tierra Blanca Joven (TBJ)

International Nuclear Information System (INIS)

Chavez, Jose A.; Lopez, Reynaldo; Kopecky, Lubomir; Landaverde, Jose

2013-01-01

The areas covered by the Tierra Blanca Joven volcanic tephra (TBJ) have suffered hillside movements, liquefaction and erosion causing important environmental, social and economic losses during the rainy season or when earthquakes occur in El Salvador. Suction values of a TBJ drop unit were obtained with the pressure cooker, centrifuge and filter paper to construct the Soil-Water Retention Curve to initiate the characterization of these partially saturated soils. The use of this curve in finite element programs has helped to know the shear stresses and permeability. The filter paper has proved to be a practical method but it is necessary to use the pressure cooker as it becomes saturated. Field tests with tensiometer (suction) and TMS3 (humidity) have been carried out to propose field methodology for an early warning system for hillsides, which can help urban planning and risk studies. (author)

Plug-in electric vehicles integrating fluctuating renewable electricity

Energy Technology Data Exchange (ETDEWEB)

Dallinger, David

2013-11-01

This paper examines a method to model plug-in electric vehicles as part of the power system and presents results for the contribution of plug-in electric vehicles to balance the fluctuating electricity generation of renewable energy sources. The scientific contribution includes: - A novel approach to characterizing fluctuating generation. This allows the detailed comparison of results from energy analysis and is the basis to describe the effect of electricity from renewable energy sources and plug-in electric vehicles on the power system. - The characterization of mobile storage, which includes the description of mobility behavior using probabilities and battery discharging costs. - The introduction of an agent-based simulation approach, coupling energy markets and distributed grids using a price-based mechanism design. - The description of an agent with specific driving behavior, battery discharging costs and optimization algorithm suitable for real plug-in vehicles and simulation models. - A case study for a 2030 scenario describing the contribution of plug-in electric vehicles to balance generation from renewable energy sources in California and Germany.

Electrical safety guidelines

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Electrical Safety Guidelines prescribes the DOE safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety standards and guidance for DOE installations in order to affect a reduction or elimination of risks associated with the use of electrical energy. The objectives of these guidelines are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

49 CFR 236.308 - Mechanical or electric locking or electric circuits; requisites.

Science.gov (United States)

2010-10-01

..., AND APPLIANCES Interlocking Standards § 236.308 Mechanical or electric locking or electric circuits; requisites. Mechanical or electric locking or electric circuits shall be installed to prevent signals from... 49 Transportation 4 2010-10-01 2010-10-01 false Mechanical or electric locking or electric...

Acousto-electrical speckle pattern in Lorentz force electrical impedance tomography

International Nuclear Information System (INIS)

Grasland-Mongrain, Pol; Destrempes, François; Cloutier, Guy; Mari, Jean-Martial; Souchon, Rémi; Catheline, Stefan; Chapelon, Jean-Yves; Lafon, Cyril

2015-01-01

Ultrasound speckle is a granular texture pattern appearing in ultrasound imaging. It can be used to distinguish tissues and identify pathologies. Lorentz force electrical impedance tomography is an ultrasound-based medical imaging technique of the tissue electrical conductivity. It is based on the application of an ultrasound wave in a medium placed in a magnetic field and on the measurement of the induced electric current due to Lorentz force. Similarly to ultrasound imaging, we hypothesized that a speckle could be observed with Lorentz force electrical impedance tomography imaging. In this study, we first assessed the theoretical similarity between the measured signals in Lorentz force electrical impedance tomography and in ultrasound imaging modalities. We then compared experimentally the signal measured in both methods using an acoustic and electrical impedance interface. Finally, a bovine muscle sample was imaged using the two methods. Similar speckle patterns were observed. This indicates the existence of an ‘acousto-electrical speckle’ in the Lorentz force electrical impedance tomography with spatial characteristics driven by the acoustic parameters but due to electrical impedance inhomogeneities instead of acoustic ones as is the case of ultrasound imaging. (paper)

Acousto-electrical speckle pattern in Lorentz force electrical impedance tomography

Science.gov (United States)

Grasland-Mongrain, Pol; Destrempes, François; Mari, Jean-Martial; Souchon, Rémi; Catheline, Stefan; Chapelon, Jean-Yves; Lafon, Cyril; Cloutier, Guy

2015-05-01

Ultrasound speckle is a granular texture pattern appearing in ultrasound imaging. It can be used to distinguish tissues and identify pathologies. Lorentz force electrical impedance tomography is an ultrasound-based medical imaging technique of the tissue electrical conductivity. It is based on the application of an ultrasound wave in a medium placed in a magnetic field and on the measurement of the induced electric current due to Lorentz force. Similarly to ultrasound imaging, we hypothesized that a speckle could be observed with Lorentz force electrical impedance tomography imaging. In this study, we first assessed the theoretical similarity between the measured signals in Lorentz force electrical impedance tomography and in ultrasound imaging modalities. We then compared experimentally the signal measured in both methods using an acoustic and electrical impedance interface. Finally, a bovine muscle sample was imaged using the two methods. Similar speckle patterns were observed. This indicates the existence of an ‘acousto-electrical speckle’ in the Lorentz force electrical impedance tomography with spatial characteristics driven by the acoustic parameters but due to electrical impedance inhomogeneities instead of acoustic ones as is the case of ultrasound imaging.

233 - 238 Musa Kifi

African Journals Online (AJOL)

User

2015-12-02

Dec 2, 2015 ... Dry pods of Piliostigma reticulatum were obtained from. Damfamin –Tofa ... stable flame gas cooker for the respective treatment periods that has to do with ..... composition of Horse Eye bean (Mucuna urens) Asian Journal of ...

Electrical energy consumption control apparatuses and electrical energy consumption control methods

Science.gov (United States)

Hammerstrom, Donald J.

2012-09-04

Electrical energy consumption control apparatuses and electrical energy consumption control methods are described. According to one aspect, an electrical energy consumption control apparatus includes processing circuitry configured to receive a signal which is indicative of current of electrical energy which is consumed by a plurality of loads at a site, to compare the signal which is indicative of current of electrical energy which is consumed by the plurality of loads at the site with a desired substantially sinusoidal waveform of current of electrical energy which is received at the site from an electrical power system, and to use the comparison to control an amount of the electrical energy which is consumed by at least one of the loads of the site.

Electricity in Europe

International Nuclear Information System (INIS)

Holmes, A.

1985-01-01

European electricity consumption and demand is summarized in Chapter 1. The relationship between government and electricity producers is touched on. Five further chapters examine aspects of electricity in Europe. Chapter 2 discusses the electricity trade (import and export of electricity). The next looks at the current status of nuclear power in individual European countries. The environmental impact of generating electricity (eg acid rain, radioactive waste disposal) is assessed next and then the price of electricity in Europe is reviewed (with comparisons between the countries). Profiles of the situation in each country are presented in the last chapter. There are 72 tables presenting the facts and figures on which the text is based. (U.K.)

Electrical machines diagnosis

CERN Document Server

Trigeassou, Jean-Claude

2013-01-01

Monitoring and diagnosis of electrical machine faults is a scientific and economic issue which is motivated by objectives for reliability and serviceability in electrical drives.This book provides a survey of the techniques used to detect the faults occurring in electrical drives: electrical, thermal and mechanical faults of the electrical machine, faults of the static converter and faults of the energy storage unit.Diagnosis of faults occurring in electrical drives is an essential part of a global monitoring system used to improve reliability and serviceability. This diagnosis is perf

Electric field prediction for a human body-electric machine system.

Science.gov (United States)

Ioannides, Maria G; Papadopoulos, Peter J; Dimitropoulou, Eugenia

2004-01-01

A system consisting of an electric machine and a human body is studied and the resulting electric field is predicted. A 3-phase induction machine operating at full load is modeled considering its geometry, windings, and materials. A human model is also constructed approximating its geometry and the electric properties of tissues. Using the finite element technique the electric field distribution in the human body is determined for a distance of 1 and 5 m from the machine and its effects are studied. Particularly, electric field potential variations are determined at specific points inside the human body and for these points the electric field intensity is computed and compared to the limit values for exposure according to international standards.

Restructured electric power systems analysis of electricity markets with equilibrium models

CERN Document Server

2010-01-01

Electricity market deregulation is driving the power energy production from a monopolistic structure into a competitive market environment. The development of electricity markets has necessitated the need to analyze market behavior and power. Restructured Electric Power Systems reviews the latest developments in electricity market equilibrium models and discusses the application of such models in the practical analysis and assessment of electricity markets.

Electric vehicles in imperfect electricity markets: The case of Germany

International Nuclear Information System (INIS)

Schill, Wolf-Peter

2011-01-01

We use a game-theoretic model to analyze the impacts of a hypothetical fleet of plug-in electric vehicles on the imperfectly competitive German electricity market. Electric vehicles bring both additional demand and additional storage capacity to the market. We determine the effects on prices, welfare, and electricity generation for various cases with different players in charge of vehicle operations. Vehicle loading increases generator profits, but decreases consumer surplus in the power market. If excess vehicle batteries can be used for storage, welfare results are reversed: generating firms suffer from the price-smoothing effect of additional storage, whereas power consumers benefit despite increasing overall demand. Strategic players tend to under-utilize the storage capacity of the vehicle fleet, which may have negative welfare implications. In contrast, we find a market power-mitigating effect of electric vehicle recharging on oligopolistic generators. Overall, electric vehicles are unlikely to be a relevant source of market power in Germany in the foreseeable future. - Highlights: → We study the effect of electric vehicles on an imperfectly competitive electricity market. → We apply a game-theoretic model to the German market. → There is a market power-mitigating effect of vehicle loading on oligopolistic generating firms. → Consumers benefit from electric vehicles if excess battery capacity can be used for grid storage. → Electric vehicles are unlikely to be a source of market power in Germany in the near future.

Syllabus in Trade Electricity-Electronics. Section II. Trade Electricity.

Science.gov (United States)

New York State Education Dept., Albany. Bureau of Occupational Education Curriculum Development.

This second section of a three-part syllabus for a flexible curriculum in trade electricity-electronics contains four semi-independent units: (1) Advanced Electricity, (2) Residential and Commercial Wiring, (3) Industrial Electricity, and (4) Motor Controls. Introductory sections describe development of the curriculum, outline the total trade…

Atmospheric electricity

CERN Document Server

Chalmers, J Alan

1957-01-01

Atmospheric Electricity brings together numerous studies on various aspects of atmospheric electricity. This book is composed of 13 chapters that cover the main problems in the field, including the maintenance of the negative charge on the earth and the origin of the charges in thunderstorms. After a brief overview of the historical developments of atmospheric electricity, this book goes on dealing with the general principles, results, methods, and the MKS system of the field. The succeeding chapters are devoted to some aspects of electricity in the atmosphere, such as the occurrence and d

Does Driving Range of Electric Vehicles Influence Electric Vehicle Adoption?

Directory of Open Access Journals (Sweden)

Seiho Kim

2017-10-01

Full Text Available This study aims to determine the influential factors on the market share of electric vehicles through panel data analysis based on time series data from 2011 to 2015 in 31 countries. We selected five significant independent variables that are expected to affect electric vehicle adoption based on literature review. The econometric model in this study suggests that the relative price of electric vehicle compared to internal combustion engine vehicle, driving range, and number of models available in markets are correlated to the market share of electric vehicles. On the other hand, relationship between recharging infrastructure—an important factor for electric vehicle adoption in many studies—and market share of electric vehicles turned out to be insignificant in this study. From a political point of view, we argue that policy makers need to allocate more resources to research and development in order to extend driving range at the early stage of electric vehicle deployment in the markets.

Renewable Electricity Futures Study. Volume 3: End-Use Electricity Demand

Energy Technology Data Exchange (ETDEWEB)

Hostick, D.; Belzer, D.B.; Hadley, S.W.; Markel, T.; Marnay, C.; Kintner-Meyer, M.

2012-06-01

The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%-90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT).

Deregulation of Electricity Market and Drivers of Demand for Electrical Energy in Industry

Directory of Open Access Journals (Sweden)

Bojnec Štefan

2016-09-01

Full Text Available This paper investigates deregulation of electricity market focusing on electricity prices and drivers of demand for electrical energy in industry in Slovenia. The patterns in evolution of real electricity price developments and the three main components of the electricity price are calculated: liberalized market share for purchased electricity price, regulated infrastructure share for use of electricity network grids and mandatory state charges in the sale of electricity (duty, excise duty and value-added tax. To calculate the real value of electricity prices, producer price index of industrial commodities for electricity prices in industry is used as deflator and implicit deflator of gross domestic product for the size of the economy. In the empirical econometric part is used regression analysis for the amount electricity consumption in the industry depending on the real gross domestic product, direct and cross-price elasticity for natural gas prices in the industry. The results confirmed volatility in real electricity price developments with their increasing tendency and the increasing share of different taxes and state charges in the electricity prices for industry. Demand for electrical energy in industry is positively associated with gross domestic product and price of natural gas as substitute for electrical energy in industry use, and negatively associated with prices of electrical energy for industry.

Essays on pricing electricity and electricity derivatives in deregulated markets

Science.gov (United States)

Popova, Julia

2008-10-01

This dissertation is composed of four essays on the behavior of wholesale electricity prices and their derivatives. The first essay provides an empirical model that takes into account the spatial features of a transmission network on the electricity market. The spatial structure of the transmission grid plays a key role in determining electricity prices, but it has not been incorporated into previous empirical models. The econometric model in this essay incorporates a simple representation of the transmission system into a spatial panel data model of electricity prices, and also accounts for the effect of dynamic transmission system constraints on electricity market integration. Empirical results using PJM data confirm the existence of spatial patterns in electricity prices and show that spatial correlation diminishes as transmission lines become more congested. The second essay develops and empirically tests a model of the influence of natural gas storage inventories on the electricity forward premium. I link a model of the effect of gas storage constraints on the higher moments of the distribution of electricity prices to a model of the effect of those moments on the forward premium. Empirical results using PJM data support the model's predictions that gas storage inventories sharply reduce the electricity forward premium when demand for electricity is high and space-heating demand for gas is low. The third essay examines the efficiency of PJM electricity markets. A market is efficient if prices reflect all relevant information, so that prices follow a random walk. The hypothesis of random walk is examined using empirical tests, including the Portmanteau, Augmented Dickey-Fuller, KPSS, and multiple variance ratio tests. The results are mixed though evidence of some level of market efficiency is found. The last essay investigates the possibility that previous researchers have drawn spurious conclusions based on classical unit root tests incorrectly applied to

Electricity market opening and electricity generation system's expansion in Slovenia

International Nuclear Information System (INIS)

Kosnjek, Z.; Vidmar, M.; Bregar, Z.

2000-01-01

Slovenia is rapidly adopting the European Union (EU) legislation to make itself ready to be admitted the fifteen EU member countries. In the area of energy or electricity supply industry, Slovenia has consequently enforced the Energy law, which in its essence follows the idea of the Directive 96/92/EC. Globally, the Directive defines common rules of the internal electricity market within EU. Any EU member country is responsible for assuring a competitive electricity market and implementing corresponding instruments as foreseen by the Directive. The share of the national market opening is calculated on the basis of eligible customers' consumption versus the overall consumption in a particular member country. Also, the Directive defines the rate of the electricity market opening. It is interesting to note that the EU member countries have been opening their national electricity markets at a greater speed than specified by the Directive. The overall Slovenian Electricity Supply Industry shall have to adapt itself to new imperatives, whereby the greatest changes will by all means take place in the area of electricity generation. As the reaction of eligible domestic market customers is quite unpredictable, the direct electricity import from foreign countries can only be estimated on a variant basis. EU countries that have deregulated their electricity market have been, step by step, gaining valuable experiences. The majority of them show a considerable pressure on having prices of the EPS generation sector reduced. A similar development can by all means be expected in Slovenia, too. it is expected that the major burden of the electricity market liberalisation and electric power interconnecting within EU will be carried by the EPS generation sector. The analyses of developed variants show that the burden, imposed by the transition onto the market economy, will be predominantly carried by the coal fired electricity supply industry. Further development of electricity

Medium-term electric power demand forecasting based on economic-electricity transmission model

Science.gov (United States)

Li, Wenfeng; Bao, Fangmin; Bai, Hongkun; Liu, Wei; Liu, Yongmin; Mao, Yubin; Wang, Jiangbo; Liu, Junhui

2018-06-01

Electric demand forecasting is a basic work to ensure the safe operation of power system. Based on the theories of experimental economics and econometrics, this paper introduces Prognoz Platform 7.2 intelligent adaptive modeling platform, and constructs the economic electricity transmission model that considers the economic development scenarios and the dynamic adjustment of industrial structure to predict the region's annual electricity demand, and the accurate prediction of the whole society's electricity consumption is realized. Firstly, based on the theories of experimental economics and econometrics, this dissertation attempts to find the economic indicator variables that drive the most economical growth of electricity consumption and availability, and build an annual regional macroeconomic forecast model that takes into account the dynamic adjustment of industrial structure. Secondly, it innovatively put forward the economic electricity directed conduction theory and constructed the economic power transfer function to realize the group forecast of the primary industry + rural residents living electricity consumption, urban residents living electricity, the second industry electricity consumption, the tertiary industry electricity consumption; By comparing with the actual value of economy and electricity in Henan province in 2016, the validity of EETM model is proved, and the electricity consumption of the whole province from 2017 to 2018 is predicted finally.

Green electricity buyer's guide

International Nuclear Information System (INIS)

Kelly, B.; Klein, S.; Olivastri, B.

2002-06-01

The electricity produced in whole or in large part from renewable energy sources like wind, small hydro electricity and solar energy, is generally referred to as green electricity. The authors designed this buyer's guide to assist customers in their understanding of green electricity, as the customers can now choose their electricity supplier. The considerations and steps involved in the purchasse of green electricity are identified, and advice is provided on ways to maximize the benefits from the purchase of green electricity. In Alberta and Ontario, customers have access to a competitive electricity market. The emphasis when developing this guide was placed firmly on the large buyers, as they can have enormous positive influence on the new market for green electricity. The first chapter of the document provides general information on green electricity. In chapter two, the authors explore the opportunity for environmental leadership. Chapter three reviews the basics of green electricity, which provides the link to chapter four dealing with the creation of a policy. Purchasing green electricity is dealt with in Chapter five, and maximizing the benefits of green electricity are examined in Chapter Six. 24 refs., 3 tabs

Renewable Electricity Futures Study. Volume 3. End-Use Electricity Demand

Energy Technology Data Exchange (ETDEWEB)

Hostick, Donna [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Belzer, David B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hadley, Stanton W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Markel, Tony [National Renewable Energy Lab. (NREL), Golden, CO (United States); Marnay, Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kintner-Meyer, Michael [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2012-06-15

The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%–90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT). Learn more at the RE Futures website. http://www.nrel.gov/analysis/re_futures/

Electricity regulation and electricity market reforms in China

International Nuclear Information System (INIS)

Ngan, H.W.

2010-01-01

The electricity industry of China has been in a process of reforms since the 1980s. This paper gives a review on the three main stages of reforms in China so as to trace out key features of various reform measures including those for power investment financing, the separation between government and power enterprises, and the division between power generation firms and power grids. The findings suggest that further regulatory change in China's electricity market reform is necessary when integration of the electricity markets and increased competition are paving the way ahead for a market-oriented structure. Prospective electricity regulation in the form of a strong legal system and effective institutions that protect market competition and promote appropriate incentives for efficiency are suggested in the paper. (author)

The relationship between electricity consumption, electricity prices and GDP in Pakistan

International Nuclear Information System (INIS)

Jamil, Faisal; Ahmad, Eatzaz

2010-01-01

This study analyzes the relationship among electricity consumption, its price and real GDP at the aggregate and sectoral level in Pakistan. Using annual data for the period 1960-2008, the study finds the presence of unidirectional causality from real economic activity to electricity consumption. In particular, growth in output in commercial, manufacturing and agricultural sectors tend to increase electricity consumption, while in residential sector, growth in private expenditures is the cause of rising electricity consumption. The study concludes that electricity production and management needs to be better integrated with overall economic planning exercises. This is essential to avoid electricity shortfalls and unplanned load shedding.

Effect of natural fibres on the mechanical properties of thermoplastic starch

Science.gov (United States)

Oniszczuk, Tomasz; Wójtowicz, Agnieszka; Moácicki, Leszek; Mitrus, Marcin; Kupryaniuk, Karol; Kusz, Andrzej; Bartnik, Grzegorz

2016-04-01

This paper presents the results covering the mechanical properties of thermoplastic potato starch granules with flax, cellulose fibre, and pine bark addition. A modified single screw extrusion-cooker TS-45 with L/D = 18 and an additional cooling section of the barrel was used as the processing unit. The establishment influence of the fibre addition, as well as the extrusion-cooker screw speed, on the mechanical properties of the thermoplastic starch granules was the main objective of the investigation. The maximum force during compression to 50% of the sample diameter, elastic modulus, and compression strength were evaluated. Significant differences were noted depending on the amount of fibre used, while only an insignificant influence of screw speed on the mechanical properties of the granulate was reported. An increased amount of fibres lowered the maximum force as well as the elastic modulus and compression strength of the thermoplastic starch granulates.

A Review on the Faults of Electric Machines Used in Electric Ships

OpenAIRE

Dionysios V. Spyropoulos; Epaminondas D. Mitronikas

2013-01-01

Electric propulsion systems are today widely applied in modern ships, including transport ships and warships. The ship of the future will be fully electric, and not only its propulsion system but also all the other services will depend on electric power. The robust and reliable operation of the ship’s power system is essential. In this work, a review on the mechanical and electrical faults of electric machines that are used in electric ships is presented.

Analysis of electricity price in Danish competitive electricity market

DEFF Research Database (Denmark)

Hu, Weihao; Chen, Zhe; Bak-Jensen, Birgitte

2012-01-01

electricity markets in some ways, is chosen as the studied power system. 10 year actual data from the Danish competitive electricity market are collected and analyzed. The relationship among the electricity price (both the spot price and the regulation price), the consumption and the wind power generation...... in an electricity market is investigated in this paper. The spot price and the regulation price generally decrease when the wind power penetration in the power system increases or the consumption of the power system decreases. The statistical characteristics of the spot price and the regulation price for different...... consumption periods and wind power penetration are analyzed. Simulation results show that the findings of this paper are useful for wind power generation companies to make the optimal bidding strategy so that the imbalance cost of trading wind power on the electricity market could be reduced....

Electrical power distribution control methods, electrical energy demand monitoring methods, and power management devices

Science.gov (United States)

Chassin, David P [Pasco, WA; Donnelly, Matthew K [Kennewick, WA; Dagle, Jeffery E [Richland, WA

2011-12-06

Electrical power distribution control methods, electrical energy demand monitoring methods, and power management devices are described. In one aspect, an electrical power distribution control method includes providing electrical energy from an electrical power distribution system, applying the electrical energy to a load, providing a plurality of different values for a threshold at a plurality of moments in time and corresponding to an electrical characteristic of the electrical energy, and adjusting an amount of the electrical energy applied to the load responsive to an electrical characteristic of the electrical energy triggering one of the values of the threshold at the respective moment in time.

Managing electrical safety

CERN Document Server

Wiggins, James H, Jr

2001-01-01

Managing Electrical Safety provides an overview of electric basics, hazards, and established standards that enables you to understand the hazards you are likely to encounter in your workplace. Focusing on typical industrial environments-which utilize voltages much higher than household or office circuits-the author identifies the eight key components of an electrical safety program and examines each using a model safety management process. You'll learn how to identify electrical hazards, how to prescribe necessary electrical Personal Protective Equipment, how to ensure that equipment is de-ene

Electric wiring domestic

CERN Document Server

Coker, A J

1992-01-01

Electric Wiring: Domestic, Tenth Edition, is a clear and reliable guide to the practical aspects of domestic electric wiring. Intended for electrical contractors, installation engineers, wiremen and students, its aim is to provide essential up to date information on modern methods and materials in a simple, clear, and concise manner. The main changes in this edition are those necessary to bring the work into line with the 16th Edition of the Regulations for Electrical Installations issued by the Institution of Electrical Engineers. The book begins by introducing the basic features of domestic

The analysis of Taiwan's residential electricity demand under the electricity tariff policy

Science.gov (United States)

Chen, Po-Jui

In October 2013, the Taiwan Power Company (Taipower), the monopolized state utility service in Taiwan, implemented an electricity tariff adjustment policy to reduce residential electricity demand. Using bi-monthly billing data from 6,932 electricity consumers, this study examine how consumers respond to an increase in electricity prices. This study employs an empirical approach that takes advantage of quasi-random variation over a period of time when household bills were affected by a change in electricity price. The study found that this price increase caused a 1.78% decline in residential electricity consumption, implying a price elasticity of -0.19 for summer-season months and -0.15 for non-summer-season months. The demand for electricity is therefore relatively inelastic, likely because it is hard for people to change their electricity consumption behavior in the short-term. The results of this study highlight that demand-side management cannot be the only lever used to address Taiwan's forecasted decrease in electricity supply.

Magnetic resonance electrical impedance tomography for determining electric field distribution during electroporation

International Nuclear Information System (INIS)

Kranjc, Matej; Miklavcic, Damijan; Bajd, Franci; Serša, Igor

2013-01-01

Electroporation is a phenomenon caused by externally applied electric field to cells that results in an increase of cell membrane permeability to various molecules. Accurate coverage of the tissue with a sufficiently large electric field presents one of the most important conditions for successful membrane permeabilization. Applications based on electroporation would greatly benefit with a method for monitoring the electric field, especially if it could be done in situ. As the membrane electroporation is a consequence of an induced transmembrane potential, which is directly proportional to the local electric field, we have been investigating current density imaging and magnetic resonance electrical impedance tomography techniques to determine the electric field distribution during electroporation. In this paper, we present comparison of current density and electric field distribution in an agar phantom and in a liver tissue exposed to electroporation pulses. As expected, a region of increased electrical conductivity was observed in the liver tissue exposed to sufficiently high electric field but not in agar phantom.

Effect of different home-cooking methods on the bioaccessibility of zinc and iron in conventionally bred cowpea (Vigna unguiculata L. Walp consumed in Brazil

Directory of Open Access Journals (Sweden)

Elenilda J. Pereira

2016-03-01

Full Text Available Background: The cowpea (Vigna unguiculata L. Wap. is an excellent source of iron and zinc. However, iron from plant sources is poorly absorbed compared with iron from animal sources. Objectives: The objective of this study was to evaluate iron and zinc bioaccessibility in cowpea cultivars after processing. Methods: Zinc and iron bioaccessibilities in cowpea samples were determined based on an in vitro method involving simulated gastrointestinal digestion with suitable modifications. Results: When water-soaked beans were cooked in a regular pan, the highest percentage of bioaccessible iron obtained was 8.92%, whereas when they were cooked in a pressure cooker without previous soaking, the highest percentage was 44.33%. Also, the percentage of bioaccessible zinc was 52.78% when they were cooked in a regular pan without prior soaking. Higher percentages of bioaccessible iron were found when cooking was done in a pressure cooker compared with regular pan cooking. In all cultivars, cooking of cowpea beans in both pressure cooker and in a regular pan yielded higher percentages of bioaccessible zinc compared with availability of bioaccessible iron. Conclusions: Iron bioaccessibility values suggest that cooking in a regular pan did not have a good effect on iron availability, since the percentage of bioaccessible iron was lower than that of zinc. The determination of iron and zinc bioaccessibility makes it possible to find out the actual percentage of absorption of such minerals and allows the development of efficient strategies for low-income groups to access foods with high levels of these micronutrients.

Casebook on electric safety accidents

International Nuclear Information System (INIS)

1987-09-01

This book gives concentration on electric safety accidents in domestic and abroad, which introduces general electrical safety with property of electricity, safe equipment and maintenance and protection of electric shock. It lists the cases of accident caused of electricity in domestic like accident in power substation, utilization equipment, load system and another accident by electricity like death in electric shock another by electricity like death in electric shock in new building construction, the cases caused of electricity in abroad like damage in electric shock by high voltage electric transformer, electric shock in summer and earth fault accident by fault cooling tower.

New conducted electrical weapons: Electrical safety relative to relevant standards.

Science.gov (United States)

Panescu, Dorin; Nerheim, Max; Kroll, Mark W; Brave, Michael A

2017-07-01

We have previously published about TASER ® conducted electrical weapons (CEW) compliance with international standards. CEWs deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. An eXperimental Rotating-Field (XRF) waveform CEW and the X2 CEW are new 2-shot electrical weapon models designed to target a precise amount of delivered charge per pulse. They both can deploy 1 or 2 dart pairs, delivered by 2 separate cartridges. Additionally, the XRF controls delivery of incapacitating pulses over 4 field vectors, in a rotating sequence. As in our previous study, we were motivated by the need to understand the cardiac safety profile of these new CEWs. The goal of this paper is to analyze the nominal electrical outputs of TASER XRF and X2 CEWs in reference to provisions of all relevant international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of several TASER XRF and X2 CEWs were measured under normal operating conditions. The measurements were compared against manufacturer specifications. CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2, IEC 60601-1 and BS EN 60601-1. Our study confirmed that the nominal electrical outputs of TASER XRF and X2 CEWs lie within safety bounds specified by relevant standards.

Chemical Detection using Electrically Open Circuits having no Electrical Connections

Science.gov (United States)

Woodward, Stanley E.; Olgesby, Donald M.; Taylor, Bryant D.; Shams, Qamar A.

2008-01-01

This paper presents investigations to date on chemical detection using a recently developed method for designing, powering and interrogating sensors as electrically open circuits having no electrical connections. In lieu of having each sensor from a closed circuit with multiple electrically connected components, an electrically conductive geometric pattern that is powered using oscillating magnetic fields and capable of storing an electric field and a magnetic field without the need of a closed circuit or electrical connections is used. When electrically active, the patterns respond with their own magnetic field whose frequency, amplitude and bandwidth can be correlated with the magnitude of the physical quantities being measured. Preliminary experimental results of using two different detection approaches will be presented. In one method, a thin film of a reactant is deposited on the surface of the open-circuit sensor. Exposure to a specific targeted reactant shifts the resonant frequency of the sensor. In the second method, a coating of conductive material is placed on a thin non-conductive plastic sheet that is placed over the surface of the sensor. There is no physical contact between the sensor and the electrically conductive material. When the conductive material is exposed to a targeted reactant, a chemical reaction occurs that renders the material non-conductive. The change in the material s electrical resistance within the magnetic field of the sensor alters the sensor s response bandwidth and amplitude, allowing detection of the reaction without having the reactants in physical contact with the sensor.

Electricity demand in Tunisia

International Nuclear Information System (INIS)

Gam, Imen; Ben Rejeb, Jaleleddine

2012-01-01

This paper examines the global electricity demand in Tunisia as a function of gross domestic product in constant price, the degree of urbanization, the average annual temperature, and the real electricity price per Kwh. This demand will be examined employing annual data over a period spanning almost thirty one years from 1976 to 2006. A long run relationship between the variables under consideration is determined using the Vector Autoregressive Regression. The empirical results suggest that the electricity demand in Tunisia is sensitive to its past value, any changes in gross domestic product and electricity price. The electricity price effects have a negative impact on long-run electricity consumption. However, the gross domestic product and the past value of electricity consumption have a positive effect. Moreover, the causality test reveals a unidirectional relationship between price and electricity consumption. Our empirical findings are effective to policy makers to maintain the electricity consumption in Tunisia by using the appropriate strategy. - Highlights: ► This paper examined the electricity demand in Tunisia in the long-run. ► The empirical analysis revealed that in the long-run the electricity demand is affected by changes in its past value, GDP in constant price and real electricity price. ► There is a unidirectional relationship between price and electricity consumption, that is to say, that the electricity price causes the consumption. ► Those results suggest that a pricing policy can be an effective instrument to rationalize the electricity consumption in Tunisia in the long-run.

Experience of electric power conservation in COELBA (Bahia Electric Company)

International Nuclear Information System (INIS)

Bastos, A.C.F.

1990-01-01

The electric power crisis of Brazilian north-east in 1987 imposes the Bahia Electric Company-COELBA to management a electric power conservation. The institutional, organizational and operational aspects are presented, including the tariff system, the market, the consumption and the relation with public. (author)

Electricity prices and generator behaviour in gross pool electricity markets

International Nuclear Information System (INIS)

O'Mahoney, Amy; Denny, Eleanor

2013-01-01

Electricity market liberalisation has become common practice internationally. The justification for this process has been to enhance competition in a market traditionally characterised by statutory monopolies in an attempt to reduce costs to end-users. This paper endeavours to see whether a pool market achieves this goal of increasing competition and reducing electricity prices. Here the electricity market is set up as a sealed bid second price auction. Theory predicts that such markets should result with firms bidding their marginal cost, thereby resulting in an efficient outcome and lower costs to consumers. The Irish electricity system with a gross pool market experiences among the highest electricity prices in Europe. Thus, we analyse the Irish pool system econometrically in order to test if the high electricity prices seen there are due to participants bidding outside of market rules or out of line with theory. Overall we do not find any evidence that the interaction between generator and the pool in the Irish electricity market is not efficient. Thus, the pool element of the market structure does not explain the high electricity prices experienced in Ireland. - Highlights: • We consider whether a gross pool achieves competitive behaviour. • We analyse the Irish pool system econometrically. • Results indicate the Irish pool system appears to work efficiently. • Generators appear to be bidding appropriately

Controlling Electrical Hazards

National Research Council Canada - National Science Library

1997-01-01

...). In general, OSHA's electrical standards are based on the National Fire Protection Associations Standard NFPA 70E, Electrical Safety Requirements for Employee Workplaces, and in turn, from the National Electrical Code (NEC...

The electricity market

International Nuclear Information System (INIS)

2015-01-01

After a first part proposing predictions for electricity production and consumption for 2016, for the turnovers of electricity suppliers and producers, an indication of important recent important events regarding enterprises belonging to the sector, and a dashboard of the sector activity, an annual report proposes a detailed overview of trends and of the competition context for the electricity market. It identifies the main market opportunities for electricity suppliers, identifies eight determining factors for the sector activity, gives an overview of the sector context evolution between 2004 and 2014 (temperatures, rainfalls, manufacturing industry production, housing and office building stock, projected housing and office building). It analyses the evolution of the sector activity by presenting and commenting various activity indicators and financial performance of electricity producers. It analyses the sector economic structure: evolution of the economic fabric, presentation of various structural characteristics (cross-border exchanges, production capacities per energy source, nuclear plant fleet, thermal plant fleet, location, electricity supply market). It proposes a presentation of the various actors and of their respective market shares, and presentations of groups, electricity suppliers, and electricity producers. It indicates highlights and presents various rankings of the main enterprises in 2014

ELECTRIC AND MAGNETIC FIELDS ELECTRIC AND GASOLINE-POWERED VEHICLES.

Science.gov (United States)

Tell, Richard A; Kavet, Robert

2016-12-01

Measurements were conducted to investigate electric and magnetic fields (EMFs) from 120 Hz to 10 kHz and 1.2 to 100 kHz in 9 electric or hybrid vehicles and 4 gasoline vehicles, all while being driven. The range of fields in the electric vehicles enclosed the range observed in the gasoline vehicles. Mean magnetic fields ranged from nominally 0.6 to 3.5 µT for electric/hybrids depending on the measurement band compared with nominally 0.4 to 0.6 µT for gasoline vehicles. Mean values of electric fields ranged from nominally 2 to 3 V m -1 for electric/hybrid vehicles depending on the band, compared with 0.9 to 3 V m -1 for gasoline vehicles. In all cases, the fields were well within published exposure limits for the general population. The measurements were performed with Narda model EHP-50C/EHP-50D EMF analysers that revealed the presence of spurious signals in the EHP-50C unit, which were resolved with the EHP-50D model. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The international electricity market infrastructure-insight from the nordic electricity market

DEFF Research Database (Denmark)

Ma, Zheng; Prljaca, Zerina; Jørgensen, Bo Nørregaard

2016-01-01

This paper aims to provide an overview of an international electricity market for the emerging market players to understand and manipulate their roles and relationships in the market by analyzing the former, present, and future Nordic electricity market. The emerging market players...... and their relationships are also discussed in the paper. This paper outlines several suggestions for the future Nordic electricity market development. Furthermore, this paper provides a recommendation for countries interested in participating and developing the cross-national electricity markets with the discussion...... of the historical development of the Nordic electricity market....

What’s cooking? Unverified assumptions, overlooking of local needs and pro-solution biases in the solar cooking literature

NARCIS (Netherlands)

Iessa, L.; Vries, de Y.A.; Swinkels, C.E.; Smits, M.; Butijn, C.A.A.

2017-01-01

Solar cookers have been tested and studied in various settings, but despite their envisioned benefits – reduction of deforestation, economic benefits, improved health, and empowerment of women – results have been modest at best. This article performs a critical review of the literature on solar

78 FR 79391 - Foreign-Trade Zone (FTZ) 22-Chicago, Illinois, Notification of Proposed Production Activity...

Science.gov (United States)

2013-12-30

... and nut assemblies; hex, lock and push nuts; lock washers; spring washers; washer packages; rivets; E... plates; oven crumb trays; rubber feet; slow cooker lids; water filter holders; electromagnetic...; washers; shoulder rivets; cotter pins; E-rings; latch, pedal, coil and torque springs; wire racks; bake...

DOI: 10.18697/ajfand.80.16715 12589 EFFECT OF COOKING ...

African Journals Online (AJOL)

boiling, deep frying in edible cooking oil, grilling, and/or roasting over fire. ... processed in the fireless cooker were of higher nutritional quality principally due to the relatively high .... and fat by factors of 4, 4 and 9, respectively for 100g of fish.

Electrical system architecture

Science.gov (United States)

Algrain, Marcelo C [Peoria, IL; Johnson, Kris W [Washington, IL; Akasam, Sivaprasad [Peoria, IL; Hoff, Brian D [East Peoria, IL

2008-07-15

An electrical system for a vehicle includes a first power source generating a first voltage level, the first power source being in electrical communication with a first bus. A second power source generates a second voltage level greater than the first voltage level, the second power source being in electrical communication with a second bus. A starter generator may be configured to provide power to at least one of the first bus and the second bus, and at least one additional power source may be configured to provide power to at least one of the first bus and the second bus. The electrical system also includes at least one power consumer in electrical communication with the first bus and at least one power consumer in electrical communication with the second bus.

Alexander von Humboldt: galvanism, animal electricity, and self-experimentation part 2: the electric eel, animal electricity, and later years.

Science.gov (United States)

Finger, Stanley; Piccolino, Marco; Stahnisch, Frank W

2013-01-01

After extensive experimentation during the 1790s, Alexander von Humboldt remained skeptical about "animal electricity" (and metallic electricity), writing instead about an ill-defined galvanic force. With his worldview and wishing to learn more, he studied electric eels in South America just as the new century began, again using his body as a scientific instrument in many of his experiments. As had been the case in the past and for many of the same reasons, some of his findings with the electric eel (and soon after, Italian torpedoes) seemed to argue against biological electricity. But he no longer used galvanic terminology when describing his electric fish experiments. The fact that he now wrote about animal electricity rather than a different "galvanic" force owed much to Alessandro Volta, who had come forth with his "pile" (battery) for multipling the physical and perceptable effects of otherwise weak electricity in 1800, while Humboldt was deep in South America. Humboldt probably read about and saw voltaic batteries in the United States in 1804, but the time he spent with Volta in 1805 was probably more significant in his conversion from a galvanic to an electrical framework for understanding nerve and muscle physiology. Although he did not continue his animal electricity research program after this time, Humboldt retained his worldview of a unified nature and continued to believe in intrinsic animal electricity. He also served as a patron to some of the most important figures in the new field of electrophysiology (e.g., Hermann Helmholtz and Emil du Bois-Reymond), helping to take the research that he had participated in to the next level.

Electricity and Man (Rev.)

Energy Technology Data Exchange (ETDEWEB)

Asimov, Isaac

1974-01-01

Our whole industrial civilization depends upon cheap energy streaking out in all directions and under fingertip controls—and that would be very difficult without electric current. It would take enormous ingenuity to find substitutes. If all electricity were shut off, then all electronic devices would be dead. Electric lights would darken. Aluminum would become a rare metal. All factories would have to develop power sources on the spot and would have to switch to primitive, mechanical controls. Every house and every farm would have to give up items we have come to take for granted—not only electric lights, but electric irons, electric toasters, electric water pumps, electric control of furnaces, and so on.

Strategic Sustainable Electric Power Energy for Ethiopia:- Electric ...

African Journals Online (AJOL)

Mengesha

Present trend in electrical engineering education; ... (EERS) USA plans to reduce its electric energy ... at the distribution center, step-down to low voltage. (400 V .... Ethiopian market and in use [13]. .... involved in the teaching EEPCo students.

The electricity market 2003

International Nuclear Information System (INIS)

2003-01-01

The electricity markets in the Nordic countries have undergone major changes since the electricity market reform work was started in the early 1990s. We now have a common Nordic electricity market that includes all of the Nordic countries, with the exception of Iceland. The objective of the electricity market reform is to introduce increased competition, to give consumers greater freedom of choice and also, by open and increased trade in electricity, create the conditions for efficient pricing. The Swedish Energy Agency is the supervisory authority specified in the Electricity Act, and one of the tasks entrusted to it by the Government is to follow developments on the electricity market and regularly compile and report current market information. The purpose of 'The Electricity Market 2003' publication is to meet the need for generalized and easily accessible information on the conditions on the Nordic market. The publication also includes summaries of the information from recent years concerning power generation and utilization in the Nordic countries, the structure of the electricity market from the players' perspective, trade in electricity in the Nordic countries and in northern Europe, electricity prices in the Nordic and other countries, and the impact of the electricity sector on the environment

Electrical engineer's reference book

CERN Document Server

Laughton, M A

1985-01-01

Electrical Engineer's Reference Book, Fourteenth Edition focuses on electrical engineering. The book first discusses units, mathematics, and physical quantities, including the international unit system, physical properties, and electricity. The text also looks at network and control systems analysis. The book examines materials used in electrical engineering. Topics include conducting materials, superconductors, silicon, insulating materials, electrical steels, and soft irons and relay steels. The text underscores electrical metrology and instrumentation, steam-generating plants, turbines

Electrical-Loss Analysis of Power-Split Hybrid Electric Vehicles

Directory of Open Access Journals (Sweden)

Andrea Bonfiglio

2017-12-01

Full Text Available The growing development of hybrid electric vehicles (HEVs has seen the spread of architectures with transmission based on planetary gear train, realized thanks to two electric machines. This architecture, by continuously regulating the transmission ratio, allows the internal combustion engine (ICE to work in optimal conditions. On the one hand, the average ICE efficiency is increased thanks to better loading situations, while, on the other hand, electrical losses are introduced due to the power circulation between the two electrical machines mentioned above. The aim of this study is then to accurately evaluate electrical losses and the average ICE efficiency in various operating conditions and over different road missions. The models used in this study are presented for both the Continuously Variable Transmission (CVT architecture and the Discontinuously Variable Transmission (DVT architecture. In addition, efficiency maps of the main components are shown. Finally, the simulation results are presented to point out strengths and weaknesses of the CVT architecture.

75 FR 15704 - Old Dominion Electric Cooperative; North Carolina Electric Membership Corporation, Complainants v...

Science.gov (United States)

2010-03-30

... Electric Cooperative; North Carolina Electric Membership Corporation, Complainants v. Virginia Electric and... the Federal Power Act, 16 U.S.C. 824(e) and 825(e), Old Dominion Electric Cooperative and North Carolina Electric Membership Corporation (Complainants) filed a formal complaint against Virginia Electric...

DOE handbook electrical safety

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-01-01

Electrical Safety Handbook presents the Department of Energy (DOE) safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety guidance and information for DOE installations to effect a reduction or elimination of risks associated with the use of electrical energy. The objectives of this handbook are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

Electricity sequence control

International Nuclear Information System (INIS)

Shin, Heung Ryeol

2010-03-01

The contents of the book are introduction of control system, like classification and control signal, introduction of electricity power switch, such as push-button and detection switch sensor for induction type and capacitance type machinery for control, solenoid valve, expression of sequence and type of electricity circuit about using diagram, time chart, marking and term, logic circuit like Yes, No, and, or and equivalence logic, basic electricity circuit, electricity sequence control, added condition, special program control about choice and jump of program, motor control, extra circuit on repeat circuit, pause circuit in a conveyer, safety regulations and rule about classification of electricity disaster and protective device for insulation.

Demand for electrical energy

International Nuclear Information System (INIS)

Bergougnoux, J.; Fouquet, D.

1983-01-01

The different utilizations of electric energy are reviewed in the residential and tertiary sectors, in the industry. The competitive position of electricity in regard to other fuels has been strengthned by the sudden rise in the price of oil in 1973-1974 and 1979-1980. The evolution of electricity prices depended on the steps taken to adjust the electricity generation system. The substitution of electricity applications for hydro-carbons is an essential point of energy policy. The adjustment at all times, at least cost and most reliability, of the supply of electricity to the demand for it is a major problem in the design and operation of electric systems. National demand for power at a given moment is extremely diversified. Electricity consumption presents daily and seasonal variations, and variations according to the different sectors. Forecasting power requirements is for any decision on operation or investment relating to an electrical system. Load management is desirable (prices according to the customers, optional tariffs for ''peak-day withdrawal''). To conclude, prospects for increased electricity consumption are discussed [fr

Electric power in Canada 1993

International Nuclear Information System (INIS)

1994-01-01

The electric power industry in Canada in 1993 is reviewed. Items discussed include: the international context of Canadian electricity; regulatory structures; electricity and the environment; electricity consumption; electricity generation; generating capacity and reserve; electricity trade; transmission; electric utility investment and financing; costing and pricing; electricity outlook; demand-side management; and non-utility generation. Information is appended on installed capacity and electrical energy consumption in Canada, installed generating capacity, conventional thermal capacity by principal fuel type, provincial electricity imports and exports, Canadian electricity exports by exporter and importer, generation capacity by type, installed generating capacity expansion in Canada by station, federal environmental standards and guidelines, and prices paid by major electric utilities for non-utility generation. 26 figs., 90 tabs

Advanced Electrical Machines and Machine-Based Systems for Electric and Hybrid Vehicles

OpenAIRE

Ming Cheng; Le Sun; Giuseppe Buja; Lihua Song

2015-01-01

The paper presents a number of advanced solutions on electric machines and machine-based systems for the powertrain of electric vehicles (EVs). Two types of systems are considered, namely the drive systems designated to the EV propulsion and the power split devices utilized in the popular series-parallel hybrid electric vehicle architecture. After reviewing the main requirements for the electric drive systems, the paper illustrates advanced electric machine topologies, including a stator perm...

Electric theory

International Nuclear Information System (INIS)

Gong, Ha Seong

2006-02-01

This book explains electric theory which is divided into four chapters. The first chapter includes electricity and material, electric field, capacitance, magnetic field and electromagnetic force, inductance. The second chapter mentions electronic circuit analysis, electric resistance,heating and power, chemical activity on current and battery with electrolysis. The third chapter deals with an alternating current circuit about the basics of an AC circuit, operating of resistance, inductance and capacitance, series circuit and parallel circuit of PLC, an alternating current circuit, Three-phase Alternating current, two terminal pair network and voltage and current of non-linearity circuit. The last explains transient phenomena of RC series circuit, RL series circuit, transient phenomena of an alternating current circuit and transient phenomena of RLC series circuit.

Restructuring in the Electricity Markets and Structural Transformation in Turkish Electricity Market

Directory of Open Access Journals (Sweden)

Hakan ÇETİNTAŞ

2015-07-01

Full Text Available Electricity markets are changed over from monopolistic to competitive structure. In many countries liberalization process in electricity markets began after 1980. In this study models for restructuring the electricity markets are explained with the natural monopoly and its regulation which is discussed in economic theory over many years. Then structural transformation in Turkish Electricity Market is explained within the legal arrangament framework and in liberalization process of electricity markets current state of Turkey is evaluated. In Turkey, the reform process in electricity market began with the liberalization of production and ıt is contiuned to change the design of the wholesale market. There has been significant progress for energy exchange by the establishment of EPİAŞ with the Electricity Market Law Numbered 6446 in 2013.

Greengrid Electric

International Nuclear Information System (INIS)

Argue, D.

1998-01-01

This presentation focused on what customers want from a competitive electricity market and what motivates customers to choose a renewable energy product and service. Greengrid Electric, a subsidiary of Enershare Technology Corp., intends to provide the green electricity that they believe customers have wanted for some time. Enershare and Greengrid have been active participants in the electricity restructuring process in Ontario, and have provided input to the Market Design Committee. Once licensed as a retailer, Greengrid intends to be the major provider of green electricity in Ontario. The company will supply a 100 per cent renewable energy product to their wholesale and retail customers. The company is confident that there is a significant niche market in Ontario for selling a green product that has a blend of wind, small hydro (run-of-river or existing dam), solar, and for energy produced from capturing methane gas from municipal landfill sites. Company officials are confident that customers will be willing to pay a premium price for energy if their purchases will lead to environmental improvement

Developments in batteries and fuel cells for electric and hybrid electric vehicles

International Nuclear Information System (INIS)

Ahmed, R.

2013-01-01

Due to ever increasing threats of climate change, urban air pollution and costly and depleting oil and gas sources a lot of work is being done for the development of electric vehicles. Hybrid electric vehicles, plug-in hybrid electric vehicles and all electric vehicles are powered by batteries or by hydrogen and fuel cells are the main types of vehicles being developed. Main types of batteries which can be used for electric vehicles are lead-acid, Ni-Cd, Nickel-Metal-Hybrid ( NiMH) and Lithium-ion (Li-ion) batteries which are discussed and compared. Lithium ion battery is the mostly used battery. Developments in the lithium ion batteries are discussed and reviewed. Redox flow batteries are also potential candidates for electric vehicles and are described. Hybrid electric vehicles can reduce fuel consumption considerably and is a good midterm solution. Electric and hybrid electric vehicles are discussed. Electric vehicles are necessary to mitigate the effects of pollution and dependence on oil. For all the electric vehicles there are two options: batteries and fuel Cells. Batteries are useful for small vehicles and shorter distances but for vehicle range greater than 150 km fuel cells are superior to batteries in terms of cost, efficiency and durability even using natural gas and other fuels in addition to hydrogen. Ultimate solution for electric vehicles are hydrogen and fuel cells and this opinion is also shared by most of the automobile manufacturers. Developments in fuel cells and their applications for automobiles are described and reviewed. Comparisons have been done in the literature between batteries and fuel cells and are described. (author)

Estimating zonal electricity supply curves in transmission-constrained electricity markets

International Nuclear Information System (INIS)

Sahraei-Ardakani, Mostafa; Blumsack, Seth; Kleit, Andrew

2015-01-01

Many important electricity policy initiatives would directly affect the operation of electric power networks. This paper develops a method for estimating short-run zonal supply curves in transmission-constrained electricity markets that can be implemented quickly by policy analysts with training in statistical methods and with publicly available data. Our model enables analysis of distributional impacts of policies affecting operation of electric power grid. The method uses fuel prices and zonal electric loads to determine piecewise supply curves, identifying zonal electricity price and marginal fuel. We illustrate our methodology by estimating zonal impacts of Pennsylvania's Act 129, an energy efficiency and conservation policy. For most utilities in Pennsylvania, Act 129 would reduce the influence of natural gas on electricity price formation and increase the influence of coal. The total resulted savings would be around 267 million dollars, 82 percent of which would be enjoyed by the customers in Pennsylvania. We also analyze the impacts of imposing a $35/ton tax on carbon dioxide emissions. Our results show that the policy would increase the average prices in PJM by 47–89 percent under different fuel price scenarios in the short run, and would lead to short-run interfuel substitution between natural gas and coal. - Highlights: • We develop a method to estimate of zonal supply curves in electricity markets. • The model estimates zonal electricity prices and zonal fuel utilization. • The model implicitly captures the average impacts of transmission constraints. • Using the method, we project supply curves for the seventeen utility zones of PJM. • We use the estimated supply curves to study the impacts of Pennsylvania's Act 129 and a carbon tax of $35 per ton

Electric power in Canada 1993

International Nuclear Information System (INIS)

1994-01-01

The electric power industry in Canada in 1993 is reviewed. Items discussed include: the international context of Canadian electricity; regulatory structures; electricity and the environment; electricity consumption; electricity generation; generating capacity and reserve; electricity trade; transmission; electric utility investment and financing; costing and pricing; electricity outlook; demand-side management; and non-utility generation. Appended information is presented on installed capacity and electrical energy consumption in Canada, installed generating capacity, conventional thermal capacity by principal fuel type, provincial electricity imports and exports, Canadian electricity exports by exporter and importer, generation capacity by type, installed generating capacity expansion in Canada by station, federal environmental standards and guidelines, and prices paid by major electric utilities for non-utility generation. 23 figs., 95 tabs

Electric power in Canada 1992

International Nuclear Information System (INIS)

1993-01-01

The electric power industry in Canada in 1991 is reviewed. Items discussed include: the international context of Canadian electricity; regulatory structures; electricity and the environment; electricity consumption; electricity generation; generating capacity and reserve; electricity trade; transmission; electric utility investment and financing; costing and pricing; electricity outlook; demand-side management; and non-utility generation. Appended information is presented on installed capacity and electrical energy consumption in Canada, installed generating capacity, conventional thermal capacity by principal fuel type, provincial electricity imports and exports, Canadian electricity exports by exporter and importer, generation capacity by type, installed generating capacity expansion in Canada by station, federal environmental standards and guidelines, and prices paid by major electric utilities for non-utility generation. 26 figs., 90 tabs

Optimal Charging of Electric Vehicles with Trading on the Intraday Electricity Market

Directory of Open Access Journals (Sweden)

Ilham Naharudinsyah

2018-06-01

Full Text Available Trading on the energy market is a possible way to reduce the electricity costs of charging electric vehicles at public charging stations. In many European countries, it is possible to trade electricity until shortly before the period of delivery on so called intraday electricity markets. In the present work, the potential for reducing the electricity costs by trading on the intraday market is investigated using the example of the German market. Based on simulations, the authors reveal that by optimizing the charging schedule together with the trading on the intraday electricity market, the costs can be reduced by around 8% compared to purchasing all the required energy from the energy supplier. By allowing the charging station operator to resell the energy to the intraday electricity market, an additional cost reduction of around 1% can be achieved. Besides the potential cost savings, the impacts of the trading unit and of the lead time of the intraday electricity market on the costs are investigated. The authors reveal that the achievable electricity costs can be strongly affected by the lead time, while the trading unit has only a minor effect on the costs.

Electricity Customers

Science.gov (United States)

Residential, commercial, and industrial customers each account for roughly one-third of the nation’s electricity use. The transportation sector also accounts for a small fraction of electricity, although it could increase.

Electric current-driven migration of electrically neutral particles in liquids

International Nuclear Information System (INIS)

Zhang, Xinfang; Qin, Rongshan

2014-01-01

We design and experimentally demonstrate a migration of electrically neutral particles in liquids driven by electric current according to the discrepancies of their electrical conductivities. A force from electric current to electrically neutral particles has been identified to drive the particles toward the lateral surface from the centre of suspension via three distinguishable zones, namely, pushing, trapping, and expelling zones. The driving force can overtake gravity in practical cases. The property of the force is found neither similar to that of the force in electromagnetophoresis nor similar to that of the electromigration force in terms of direction and magnitude. An expression for the force at the pushing zone has been developed based on the numerical calculation of the thermodynamics of suspension fluids. The excellent agreement between numerical calculations and experimental data demonstrates that our calculation provides fundamental and predictive insight into particles separation from the liquids. Therefore, it is possible to use the force in many engineering applications such as separation of particles according to the differences of their electrical conductivities

System for detecting and limiting electrical ground faults within electrical devices

International Nuclear Information System (INIS)

Gaubatz, D.C.

1990-01-01

This paper discusses, in a nuclear power plant of a variety wherein a reactor is provided including a reactor vessel retaining a liquid metal coolant, a reactor core and an electromagnetic pump having inductive windings insulatively retained within the electrically conductive wall of an enclosure, the method for controlling electrical ground fault current between a the inductive winding and the walls. It comprises providing an electrically isolated power source by inductive coupling with the plant power supply; rectifying the power source to provide an isolated d.c. power source; providing an inverter powered from the isolated d.c. power source under the control of the plant control system for selectively energizing the inductive windings; providing a fault control conductor electrically connected with the pump enclosure wall and extending as an electrical return for ground fault current to the inverter; and providing an electrical resistance between the conductor and the isolated inverter having an impedance selected to limit the fault current below a predetermined value limiting arc damage at any the electrical ground fault location

Effect of AC electric fields on flame spread over electrical wire

KAUST Repository

Kim, Minkuk

2011-01-01

The effect of electric fields on the characteristics of flame spread over insulated electrical wire has been investigated experimentally by varying AC voltage and frequency applied to the wire in the normal gravity condition. The polyethylene (PE) insulated electrical wire was placed horizontally on electrically non-conducting posts and one end of the wire was connected to the high voltage terminal. Thus, the electrical system is the single electrode configuration. The wire was ignited at one end and the flame spread rate along the wire has been measured from the images using a video camera. Two distinct regimes existed depending on the applied AC frequency. In the low frequency regime, the flame spread rate decreased with the frequency and voltage. While in the high frequency regime, it decreased initially with voltage and then increased. At high frequency, the spread rate was even over that without applying electric fields. This result implies that fire safety codes developed without considering the effect of electric fields may require modifications. © 2010 Published by Elsevier Inc. on behalf of The Combustion Institute. All rights reserved.

Electric power monthly

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

The Energy Information Administration (EIA) prepares the Electric Power Monthly (EPM) for a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. This publication provides monthly statistics for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions. The EIA publishes statistics in the EPM on net generation by energy source, consumption, stocks, quantity, quality, and cost of fossil fuels; and capability of new generating units by company and plant. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead.

Electrical equipment design library

International Nuclear Information System (INIS)

1994-01-01

This book guides the design supervision, construction order for electrical equipment. The contents of this library are let's use electricity like this, leading-in-pole and casual power, electric pole install below 300KVA, electric pole install below 301∼1000KVA, electric pole install exceed 1000KVA, rooftop install exceed 1000KVA, CUBICLE type, 154KV services. It adds an appendix.

Electrical installation calculations advanced

CERN Document Server

Kitcher, Christopher

2013-01-01

All the essential calculations required for advanced electrical installation workThe Electrical Installation Calculations series has proved an invaluable reference for over forty years, for both apprentices and professional electrical installation engineers alike. The book provides a step-by-step guide to the successful application of electrical installation calculations required in day-to-day electrical engineering practiceA step-by-step guide to everyday calculations used on the job An essential aid to the City & Guilds certificates at Levels 2 and 3For apprentices and electrical installatio

On using PEMFC for Electrical Power Generation on More Electric Aircraft

OpenAIRE

Jenica Ileana Corcau; Liviu Dinca

2012-01-01

The electrical power systems of aircrafts have made serious progress in recent years because the aircrafts depend more and more on the electricity. There is a trend in the aircraft industry to replace hydraulic and pneumatic systems with electrical systems, achieving more comfort and monitoring features and enlarging the energetic efficiency. Thus, was born the concept More Electric Aircraft. In this paper is analyzed the integration of a fuel cell into the existing elect...

Electric drives

Energy Technology Data Exchange (ETDEWEB)

1986-10-01

Several electric vehicles have been tested in long-term tests, i.e. an electric passenger car (maximum speed 115 km/h) and several busses for use in pedestrians' zones, spas, airports, natural reserves, and urban transportation (DUO busses). The ICE high-speed train is discussed in some detail, i.e. its aeroacoustic and aerodynamic design, running gear, computer-controlled drives and brakes, diagnostic systems, and electrical equipment. The Berlin Maglev system is mentioned as well as current inverters in rail vehicles. (HWJ).

Grid Integration of Electric Vehicles in Open Electricity Markets

DEFF Research Database (Denmark)

congestion management scenario within electric distribution networks •optimal EV charging management with the fleet operator concept and smart charging management •EV battery technology, modelling and tests •the use of EVs for balancing power fluctuations from renewable energy sources, looking at power......Presenting the policy drivers, benefits and challenges for grid integration of electric vehicles (EVs) in the open electricity market environment, this book provides a comprehensive overview of existing electricity markets and demonstrates how EVs are integrated into these different markets...... of the technologies for EV integration, this volume is informative for research professors and graduate students in power systems; it will also appeal to EV manufacturers, regulators, EV market professionals, energy providers and traders, mobility providers, EV charging station companies, and policy makers....

Electricity pricing and load dispatching in deregulated electricity market

International Nuclear Information System (INIS)

Geerli; Niioka, S.; Yokoyama, R.

2003-01-01

A rapid move to a market-based electric power industry will significantly alter the structure of electricity pricing and system operation. In this paper, we consider a game of negotiation in the electricity market, involving electric utilities, independent power producers (IPPs) and large-scale customers. We analyze the two-level game strategies for the negotiation process between utilities, IPPs and customers. These have been previously recognized as a way to come up with a rational decision for competitive markets, in which players intend to maximize their own profits. The derived operation rules based on competition can be viewed as an extension of the conventional equal incremental cost method for the deregulated power system. The proposed approach was applied to several systems to verify its effectiveness. (Author)

Into the Looking Glass: Psychological Contracts in Research Administration

Science.gov (United States)

Hicks, Melanie; Monroy-Paz, Jorge

2015-01-01

In a world of fast moving technology, pressure cooker work climates and stretched resources, productivity, employee engagement, and talent retention are critical to the success of any organization. Research administration offices are no exception. Psychological contract theory provides insightful illumination on reactions to these environments by…

7 CFR 58.728 - Cooking the batch.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Cooking the batch. 58.728 Section 58.728 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.728 Cooking the batch. Each batch of cheese within the cooker, including the optional...

Energy efficient measures to reduce PM2,5 emissions due to cooking

NARCIS (Netherlands)

Jacobs, P.; Cornelissen, H.J.M.; Borsboom, W.A.

2016-01-01

Laboratory tests with heating olive oil in kitchens suggest that the current building regulation in the Netherlands for kitchen exhaust is inadequate to directly address cooking fumes. Due to building traditions, for motor less cooker hoods often only 50% of the available capacity of the mechanical

Electrical power system integrated thermal/electrical system simulation

International Nuclear Information System (INIS)

Freeman, W.E.

1992-01-01

This paper adds thermal properties to previously developed electrical Saber templates and incorporates these templates into a functional Electrical Power Subsystem (EPS) simulation. These combined electrical and thermal templates enable the complete and realistic simulation of a vehicle EPS on-orbit. Applications include on-orbit energy balance determinations for system load changes, initial array and battery EPS sizing for new EPS development, and array and battery technology trade studies. This effort proves the versatility of the Saber simulation program in handling varied and complex simulations accurately and in a reasonable amount of computer time. 9 refs

Integrated powertrain control for hybrid electric vehicles with electric variable transmission

NARCIS (Netherlands)

Kessels, J.T.B.A.; Foster, D.L.; Bosch, van den P.P.J.

2009-01-01

The electric variable transmission (EVT) offers a powersplit for hybrid electric vehicles by integrating two motor/ generator sets into one electric machine. This double rotor concept implements a continuously variable transmission between the engine and the driveline, including the possibility for

Driving with electrical power

International Nuclear Information System (INIS)

Ursin, M.; Hoeckel, M.

2008-01-01

This article takes a look at the chances offered to the electricity supply industry by the increasing use of battery-driven vehicles - and the advantages thus offered to the environment. The use of the vehicles' batteries to form a distributed electricity storage scheme is discussed. The authors comment that, although electrically-driven vehicles consume more power, the total primary energy consumption and pollutant emissions will be reduced. The actual electricity consumption of electric vehicles and the source of this power are examined. Power saved by the reduced use of electrical heating systems and boilers could, according to the authors, be used to charge the batteries of electric vehicles. The use of these batteries as a storage system to help regulate electricity supplies is discussed and the steps to be taken for the implementation of such a system are listed

Exploring utility organization electricity generation, residential electricity consumption, and energy efficiency: A climatic approach

International Nuclear Information System (INIS)

Craig, Christopher A.; Feng, Song

2017-01-01

Highlights: • Study examined impact of electricity fuel sources and consumption on emissions. • 97.2% of variability in emissions explained by coal and residential electricity use. • Increasing cooling degree days significantly related to increased electricity use. • Effectiveness of state-level energy efficiency programs showed mixed results. - Abstract: This study examined the impact of electricity generation by fuel source type and electricity consumption on carbon emissions to assess the role of climatic variability and energy efficiency (EE) in the United States. Despite high levels of greenhouse gas emissions, residential electricity consumption continues to increase in the United States and fossil fuels are the primary fuel source of electricity generation. 97.2% of the variability in carbon emissions in the electricity industry was explained by electricity generation from coal and residential electricity consumption. The relationships between residential electricity consumption, short-term climatic variability, long-term climatic trends, short-term reduction in electricity from EE programs, and long-term trends in EE programs was examined. This is the first study of its nature to examine these relationships across the 48 contiguous United States. Inter-year and long-term trends in cooling degree days, or days above a baseline temperature, were the primary climatic drivers of residential electricity consumption. Cooling degree days increased across the majority of the United States during the study period, and shared a positive relationship with residential electricity consumption when findings were significant. The majority of electricity reduction from EE programs was negatively related to residential electricity consumption where findings were significant. However, the trend across the majority of states was a decrease in electricity reduction from EE while residential electricity consumption increased. States that successfully reduced consumption

Electricity derivatives

CERN Document Server

Aïd, René

2015-01-01

Offering a concise but complete survey of the common features of the microstructure of electricity markets, this book describes the state of the art in the different proposed electricity price models for pricing derivatives and in the numerical methods used to price and hedge the most prominent derivatives in electricity markets, namely power plants and swings. The mathematical content of the book has intentionally been made light in order to concentrate on the main subject matter, avoiding fastidious computations. Wherever possible, the models are illustrated by diagrams. The book should allow prospective researchers in the field of electricity derivatives to focus on the actual difficulties associated with the subject. It should also offer a brief but exhaustive overview of the latest techniques used by financial engineers in energy utilities and energy trading desks.

Electricity electron measurement

International Nuclear Information System (INIS)

Kim, Sang Jin; Sung, Rak Jin

1985-11-01

This book deals with measurement of electricity and electron. It is divided into fourteen chapters, which depicts basic of electricity measurement, unit and standard, important electron circuit for measurement, instrument of electricity, impedance measurement, power and power amount measurement, frequency and time measurement, waveform measurement, record instrument and direct viewing instrument, super high frequency measurement, digital measurement on analog-digital convert, magnetic measurement on classification by principle of measurement, measurement of electricity application with principle sensors and systematization of measurement.

Our Lives with Electric Things

DEFF Research Database (Denmark)

Schick, Lea

2017-01-01

Our lives with electric things are positively charged with meaning. Our bodies pulse with electrical activity. The electric appliances, devices, and technologies around us bring hope and anxiety, possibility and danger. Some have transformed our possibilities for reproducing, nurturing, and susta......Our lives with electric things are positively charged with meaning. Our bodies pulse with electrical activity. The electric appliances, devices, and technologies around us bring hope and anxiety, possibility and danger. Some have transformed our possibilities for reproducing, nurturing......, and sustaining life. Some mediate human sociality across time and space, while others knit ecological and interspecies relationships together. Still others create possibilities for controlling, managing, exploiting, and ending life. Against this backdrop any anthropology of electricity seems to require electric...... things. Can we still imagine the possibility of lives without electric things? Can electric things help us to address the possibilities and limits of life with electricity? Can our lives with electricity ever be disentangled from electric things? What are the unique capacities and material politics...

Future Electricity Markets

DEFF Research Database (Denmark)

Pinson, Pierre

2015-01-01

The changing face of energy production in Europe necessitates a rethink in the way that electricity markets are structured. The ‘5s’ (Future Electricity Markets) project is a multi-disciplinary project that is looking to challenge the current approach to the design and operation of electricity...

Investigation on Furan Levels in Pressure-Cooked Foods

Directory of Open Access Journals (Sweden)

Adriana P. Arisseto

2013-01-01

Full Text Available Furan is a food processing contaminant classified as possibly carcinogenic to humans. As the occurrence of furan has been reported in a variety of foods processed in sealed containers, the objective of this work was to investigate if the contaminant can be found in home-cooked foods prepared in a pressure cooker. For that, several foods including beans, soy beans, whole rice, beef, pork, potato, and cassava were pressure-cooked and analyzed for the furan content by gas chromatography coupled to mass spectrometry preceded by a headspace solid phase microextraction (HS-SPME-GC/MS. Furan was not found above the limit of quantification in the pressure-cooked samples. No furan has either been found in reheated samples after 24 hours under cold storage. Although levels up to 173 μg/kg were already reported for commercial canned/jarred foods, it seems that the cooking in a pressure cooker may not represent a concern in relation to the occurrence of furan in foods.

Characteristics of indoor radon and its progeny in a Japanese dwelling while using air appliances

International Nuclear Information System (INIS)

Pornnumpa, C.; Tokonami, S.; Sorimachi, A.; Kranrod, C.

2015-01-01

Characteristics of radon and its progeny were investigated in different air conditions by turning four types of indoor air appliances on and off in a two-story concrete Japanese dwelling. The four appliances were air conditioner, air cleaner, gas heater and cooker hood. The measurements were done using two devices: (1) a Si-based semiconductor detector for continuous measurement of indoor radon concentration and (2) a ZnS(Ag) scintillation counting system for equilibrium-equivalent radon concentration. Throughout the entire experiment, the cooker hood was the most effective in decreasing indoor radon concentration over a long period of time and the less effective was the air conditioner, while the air cleaner and gas heater did not affect the concentration of radon. However, the results measured in each air condition will differ according to the lifestyles and activities of the inhabitants. In this study, indoor radon and its progeny in a Japanese dwelling will be characterised by the different air conditions. (authors)

Fruit and vegetable consumption and food values: National patterns in the United States by Supplemental Nutrition Assistance Program eligibility and cooking frequency.

Science.gov (United States)

Wolfson, Julia A; Bleich, Sara N

2015-07-01

More frequent cooking at home may help improve diet quality and be associated with food values, particularly for individuals participating in the Supplemental Nutrition Assistance Program (SNAP). To examine patterns of fruit and vegetable consumption and food values among adults (aged 20 and older) in the United States, by SNAP participation and household cooking frequency. Analysis of cross-sectional 24-hour dietary recall data obtained from the National Health and Nutrition Examination Survey 2007-2010 (N=9560). A lower percentage of SNAP participants consumed fruit (total: 35% vs. 46%, p=0.001; fresh: 30% vs. 41%, pcooking >6times/week was associated with greater vegetable consumption compared to cooking cooked ≥2times/week were more to report price (medium cookers: 47% vs. 33%, p=0.001; high cookers: 52% vs. 40%, pcooking frequency. Efforts to improve diet quality should consider values on which food purchases are based. Copyright © 2015 Elsevier Inc. All rights reserved.

Solar oven for intertropical zones: Optogeometrical design

Energy Technology Data Exchange (ETDEWEB)

Jaramillo, O.A.; Huelsz, G.; Hernandez-Luna, G.; del Rio, J.A. [Centro de Investigacion en Energia. Universidad Nacional Autonoma de Mexico. Priv. Xochicalco S/N. Col. Centro. Temixco, Morelos 62580 (Mexico); Acosta, R. [Universidad de Quintana Roo, Boulevard Bahia s/n Esq. I. Comonfort, Chetumal Quintana Roo 77019 (Mexico); Arriaga, L.G. [Instituto de Investigaciones Electricas, Av. Reforma 113, Col. Palmira, Cuernavaca, Morelos 62490 (Mexico)

2007-10-15

In this paper, a novel design of a solar oven for the intertropical zones is presented. The oven box has seven faces instead of the six faces of most common designs reported in the literature, two of them are alternatively used as bases. This oven has four fixed mirrors to concentrate solar energy.The main advantage of this novel design is that the oven needs only four simple movements in order to obtain an adequate solar concentration throughout the year. This feature has been possible due to the optogeometrical design that is presented. A simple theoretical model of the oven concentration is developed. According to the model, the concentration achieved by the oven at noon is greater than 1.95 for all days of the year. In order to analyze the optical performance of the solar cooker, an experimental evaluation was conducted by using a scale model of the solar cooker and a heliodon. (author)

Solar oven for intertropical zones: Optogeometrical design

International Nuclear Information System (INIS)

Jaramillo, O.A.; Huelsz, G.; Hernandez-Luna, G.; Rio, J.A. del; Acosta, R.; Arriaga, L.G.

2007-01-01

In this paper, a novel design of a solar oven for the intertropical zones is presented. The oven box has seven faces instead of the six faces of most common designs reported in the literature, two of them are alternatively used as bases. This oven has four fixed mirrors to concentrate solar energy.The main advantage of this novel design is that the oven needs only four simple movements in order to obtain an adequate solar concentration throughout the year. This feature has been possible due to the optogeometrical design that is presented. A simple theoretical model of the oven concentration is developed. According to the model, the concentration achieved by the oven at noon is greater than 1.95 for all days of the year. In order to analyze the optical performance of the solar cooker, an experimental evaluation was conducted by using a scale model of the solar cooker and a heliodon

Electricity Storage. Technology Brief

Energy Technology Data Exchange (ETDEWEB)

Simbolotti, G. [Italian National Agency for New Technologies, Energy and Sustainable Economic Development ENEA, Rome (Italy); Kempener, R. [International Renewable Energy Agency IRENA, Bonn (Germany)

2012-04-15

Electricity storage is a key technology for electricity systems with a high share of renewables as it allows electricity to be generated when renewable sources (i.e. wind, sunlight) are available and to be consumed on demand. It is expected that the increasing price of fossil fuels and peak-load electricity and the growing share of renewables will result in electricity storage to grow rapidly and become more cost effective. However, electricity storage is technically challenging because electricity can only be stored after conversion into other forms of energy, and this involves expensive equipment and energy losses. At present, the only commercial storage option is pumped hydro power where surplus electricity (e.g. electricity produced overnight by base-load coal or nuclear power) is used to pump water from a lower to an upper reservoir. The stored energy is then used to produce hydropower during daily high-demand periods. Pumped hydro plants are large-scale storage systems with a typical efficiency between 70% and 80%, which means that a quarter of the energy is lost in the process. Other storage technologies with different characteristics (i.e. storage process and capacity, conversion back to electricity and response to power demand, energy losses and costs) are currently in demonstration or pre-commercial stages and discussed in this brief report: Compressed air energy storage (CAES) systems, Flywheels; Electrical batteries; Supercapacitors; Superconducting magnetic storage; and Thermal energy storage. No single electricity storage technology scores high in all dimensions. The technology of choice often depends on the size of the system, the specific service, the electricity sources and the marginal cost of peak electricity. Pumped hydro currently accounts for 95% of the global storage capacity and still offers a considerable expansion potential but does not suit residential or small-size applications. CAES expansion is limited due to the lack of suitable

Electricity and magnetism

CERN Document Server

Robertson, William C

2005-01-01

Shocked by static? Mixed up about magnets? Curious about currents? This book will help you get beyond memorizing electricity-related formulas, rules, and procedures so you can understand the topic at a deep level deep enough to teach it with confidence and comfort. By covering the basics of static electricity, current electricity, and magnetism, the book develops a scientific model showing that electricity and magnetism are really the same phenomenon in different forms. A bonus feature: access to interactive software that you can download from the NSTA Web site. The software will help you investigate electrical circuits from simple to complex without having to buy a lot of expensive materials (or risking electrocution!). Electricity and Magnetism is the fifth title in the award-winning NSTA Press Stop Faking It! Series. As author Bill Robertson writes, The book you have in your hands is not a textbook. It is, however, designed to help you get science at a level you never thought possible, and also to bring yo...

The electric power engineering handbook electric power generation, transmission, and distribution

CERN Document Server

Grigsby, Leonard L

2012-01-01

Featuring contributions from worldwide leaders in the field, the carefully crafted Electric Power Generation, Transmission, and Distribution, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) provides convenient access to detailed information on a diverse array of power engineering topics. Updates to nearly every chapter keep this book at the forefront of developments in modern power systems, reflecting international standards, practices, and technologies. Topics covered include: * Electric Power Generation: Nonconventional Methods * Electric Power Generation

Respiratory health and lung function in Chinese restaurant kitchen workers.

Science.gov (United States)

Wong, Tze Wai; Wong, Andromeda H S; Lee, Frank S C; Qiu, Hong

2011-10-01

To measure air pollutant concentrations in Chinese restaurant kitchens using different stove types and assess their influence on workers' respiratory health. 393 kitchen workers from 53 Chinese restaurants were surveyed over 16 months: 115 workers from 21 restaurants using only electric stoves and 278 workers from 32 restaurants using only gas stoves. Workers were interviewed about their respiratory symptoms and had their lung function tested. Concentrations of nitric oxide (NO), nitrogen dioxide (NO(2)), carbon monoxide (CO), carbon dioxide (CO(2)), methane (CH(4)), non-methane hydrocarbons (NMHC), total volatile organic compounds (TVOC) and fine particulate matter (PM(2.5)) were measured using portable monitors and air-bag sampling. Temperature and noise levels were assessed. Median concentrations of NO, NO(2) and CO were 7.4, 1.5 and 1.6 times higher in gas-fuelled kitchens than in electric ones and average concentrations of PM(2.5) and TVOC were 81% and 78% higher, respectively. Differences were smaller for CH(4) and NMHC. Electricity-run kitchens were 4.5°C cooler and 9 dBA less noisy than gas-fuelled ones. Workers using electric cookers had significantly better lung function than their gas-using counterparts and their mean FEV(1) and FVC values were 5.4% and 3.8% higher, respectively, after adjustment for confounders. Wheeze, phlegm, cough and sore throat were more prevalent in workers using gas. The adjusted OR for having phlegm regularly was significantly higher. The poorer lung function and higher prevalence of respiratory symptoms among workers in gas-fuelled kitchens compared to those in electricity-powered kitchens may be associated with exposure to higher concentrations of toxic air pollutants generated during gas cooking.

Basic Principles of Electrical Network Reliability Optimization in Liberalised Electricity Market

Science.gov (United States)

Oleinikova, I.; Krishans, Z.; Mutule, A.

2008-01-01

The authors propose to select long-term solutions to the reliability problems of electrical networks in the stage of development planning. The guide lines or basic principles of such optimization are: 1) its dynamical nature; 2) development sustainability; 3) integrated solution of the problems of network development and electricity supply reliability; 4) consideration of information uncertainty; 5) concurrent consideration of the network and generation development problems; 6) application of specialized information technologies; 7) definition of requirements for independent electricity producers. In the article, the major aspects of liberalized electricity market, its functions and tasks are reviewed, with emphasis placed on the optimization of electrical network development as a significant component of sustainable management of power systems.

Electricity '93: Focussed for the future [Canadian Electrical Association annual report, 1992

International Nuclear Information System (INIS)

1993-01-01

The Canadian Electrical Association annual report for 1993 is presented. The Association's objectives include providing a forum for studying, discussing, and exchanging information related to the electric utility industry; developing and promotion of policies on production, distribution, and utilization of electricity; acting as an industry advocate before the public and governments; and facilitating Canadian involvement in international activities affecting the electric utility industry. Association members include individuals, 35 corporate utilities, 35 corporate manufacturers, 180 associate companies, and representation from contractors, consultants, academia, and government. Association activities in helping utilities to control costs, sponsoring research and development, enhancing value of electricity to members' customers, and meeting public responsibilities are reviewed. Selected research and development projects are summarized and statistics on Canadian electricity production, generating capacity, energy demand, electricity prices, and exports are included. Lists of research and development projects awarded and completed in 1992 are appended. 10 figs., 2 tabs

Electrical equipment qualification

International Nuclear Information System (INIS)

Farmer, W.S.

1983-01-01

Electrical equipment qualification research programs being carried out by CEA, JAERI, and Sandia Laboratories are discussed. Objectives of the program are: (1) assessment of accident simulation methods for electrical equipment qualification testing; lower coarse (2) evaluation of equipment aging and accelerated aging methods; (3) determine radiation dose spectrum to electrical equipment and assess simulation methods for qualification; (4) identify inadequacies in electrical equipment qualification procedures and standards and potential failure modes; and (5) provide data for verifying and improving standards, rules and regulatory guides

Electrical applications 2

CERN Document Server

Tyler, David W

1998-01-01

Electrical Applications 2 covers the BTEC NII level objectives in Electrical Applications U86/330. To understand the applications, a knowledge of the underlying principles is needed and these are covered briefly in the text. Key topics discussed are: the transmission and distribution of electrical energy; safety and regulations; tariffs and power factor correction; materials and their applications in the electrical industry; transformers; DC machines; illumination; and fuse protection. Included in each chapter are worked examples which should be carefully worked through before progressing to t

Thermal burn and electrical injuries among electric utility workers, 1995-2004.

Science.gov (United States)

Fordyce, Tiffani A; Kelsh, Michael; Lu, Elizabeth T; Sahl, Jack D; Yager, Janice W

2007-03-01

This study describes the occurrence of work-related injuries from thermal-, electrical- and chemical-burns among electric utility workers. We describe injury trends by occupation, body part injured, age, sex, and circumstances surrounding the injury. This analysis includes all thermal, electric, and chemical injuries included in the Electric Power Research Institute (EPRI) Occupational Health and Safety Database (OHSD). There were a total of 872 thermal burn and electric shock injuries representing 3.7% of all injuries, but accounting for nearly 13% of all medical claim costs, second only to the medical costs associated with sprain- and strain-related injuries (38% of all injuries). The majority of burns involved less than 1 day off of work. The head, hands, and other upper extremities were the body parts most frequently injured by burns or electric shocks. For this industry, electric-related burns accounted for the largest percentage of burn injuries, 399 injuries (45.8%), followed by thermal/heat burns, 345 injuries (39.6%), and chemical burns, 51 injuries (5.8%). These injuries also represented a disproportionate number of fatalities; of the 24 deaths recorded in the database, contact with electric current or with temperature extremes was the source of seven of the fatalities. High-risk occupations included welders, line workers, electricians, meter readers, mechanics, maintenance workers, and plant and equipment operators.

Electric power monthly

Energy Technology Data Exchange (ETDEWEB)

Smith, Sandra R.; Johnson, Melvin; McClevey, Kenneth; Calopedis, Stephen; Bolden, Deborah

1992-05-01

The Electric Power Monthly is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the national, Census division, and State levels for net generation, fuel consumption, fuel stocks, quantity and quality of fuel, cost of fuel, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fuel are also displayed for the North American Electric Reliability Council (NERC) regions. Additionally, statistics by company and plant are published in the EPM on capability of new plants, new generation, fuel consumption, fuel stocks, quantity and quality of fuel, and cost of fuel.

A CALCULATION METHOD OF TRANSIENT MODES OF ELECTRIC SHIPS’ PROPELLING ELECTRIC PLANTS

Directory of Open Access Journals (Sweden)

V. A. Yarovenko

2017-12-01

Full Text Available The purpose of the work is to develop the method for calculating the transient modes of electric ships’ propelling electric plants during maneuver. This will allow us to evaluate and improve the maneuverability of vessels with electric motion. Methodology. The solution to the problems is proposed to be carried out on the basis of mathematical modeling of maneuvering modes. The duration of transient modes in an electric power plant at electric ships’ maneuvers is commensurable with the transient operation modes of the vessel itself. Therefore, the analysis of the electric power plants’ maneuvering modes should be made in unity with all the components of the ship’s propulsion complex. Results. A specified mathematical model of transient regimes of electric ship’s propulsion complex, including thermal motors, synchronous generators, electric power converters, propulsion motors, propellers, rudder, ship’s hull is developed. The model is universal. It covers the vast majority of modern and promising electric ships with a traditional type of propulsors. It allows calculating the current values of the basic mode indicators and assessing the quality indicators of maneuvering. The model is made in relative units. Dimensionless parameters of the complex are obtained. These parameters influence the main indicators of the quality of maneuvering. The adequacy of the suggested specified mathematical model and the developed computation method based on it were confirmed. To do this, the results of mathematical modeling for a real electric ship were compared with the data obtained in the course of field experiments conducted by other researchers. Originality. The mathematical description of a generator unit, as an integral part of an indivisible ship’s propulsion complex, makes it possible to calculate the dynamic operation modes of electric power sources during electric vessels’ maneuvering. There is an opportunity to design the electric ships�

Electricity restructuring in Turkey

International Nuclear Information System (INIS)

Oezkyvrak, Oezlem

2005-01-01

Turkey implemented the electricity sector reform by which the Electricity Market Law no. 4628 passed in February 2001. Recently, all segments of the Turkish electricity sector are dominated by a vertically integrated, public-owned monopoly - Tuerkiye Elektrik Kurumu - the Turkish electricity institution. The Turkish electricity reform involves vertical deintegration of generation, transmission and distribution, introduction of competition into generation and retail sale, establishment of an independent regulatory authority and privatization of public generation and distribution entities. This article provides an overview of the Turkish electricity sector reform and defines some problems that may affect the reform success

Electrically conductive carbon nanofiber/paraffin wax composites for electric thermal storage

International Nuclear Information System (INIS)

Zhang Kun; Han Baoguo; Yu Xun

2012-01-01

Highlights: ► Carbon nanofiber (CNF)/paraffin wax composite is found to be a promising electric thermal storage material. ► The thermal storage capacity of CNF/paraffin wax composite is five times of traditional electric thermal storage material. ► CNF is shown to be an effective conductive filler for the composite. - Abstract: The research of electric thermal storage (ETS) has attracted a lot of attention recently, which converts off-peak electrical energy into thermal energy and release it later at peak hours. In this study, new electric thermal storage composites are developed by employing paraffin wax as thermal storage media and carbon nanofiber (CNF) as conductive fillers. Electric heating and thermal energy release performances of the CNF/paraffin wax composites are experimentally investigated. Experimental results show that, when the composites are heated to about 70 °C, the developed electrically conductive CNF/paraffin wax composites present a thermal storage capacity of about 280 kJ/kg, which is five times of that of traditional thermal storage medium such as ceramic bricks (54 kJ/kg). The CNF/paraffin wax composites can also effectively store the thermal energy and release the thermal energy in later hours.

Effect of applied DC electric fields in flame spread over polyethylene-coated electrical wire

KAUST Repository

Jin, Young Kyu

2011-03-01

We experimentally investigated the effect of applied DC electric fields on the flame spread over polyethylene-coated electrical wire. The flame-spread rates over electrical wire with negative and positive DC electric fields from 0 to ±7 kV were measured and analyzed. We compared the results for DC electric fields with previous results for AC electric fields. We explored whether or not various flame shapes could be obtained with DC electric fields and the main reason for the flame-spread acceleration, particularly at the end of the electrical wire, for AC electric fields. We found that DC electric fields do not significantly affect the flame-spread rates. However, the flame shape is mildly altered by the ionic wind effect even for DC electric fields. The flame-spread rate is relevant to the flame shape and the slanted direction in spite of the mild impact. A possible explanation for the flame spread is given by a thermal-balance mechanism and fuel-vapor jet. © 2011 The Korean Society of Mechanical Engineers.

Electric power annual, 1991

International Nuclear Information System (INIS)

1993-01-01

The Electric Power Annual is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. The 1991 edition has been enhanced to include statistics on electric utility demand-side management and nonutility supply. ''The US Electric Power Industry at a Glance'' section presents a profile of the electric power industry ownership and performance, and a review of key statistics for the year. Subsequent sections present data on generating capability, including proposed capability additions; net generation; fossil-fuel statistics; electricity sales, revenue, and average revenue per kilowatthour sold; financial statistics; environmental statistics; electric power transactions; demand-side management; and nonutility power producers. In addition, the appendices provide supplemental data on major disturbances and unusual occurrences in US electricity power systems. Each section contains related text and tables and refers the reader to the appropriate publication that contains more detailed data on the subject matter. Monetary values in this publication are expressed in nominal terms

CHOOSING THE POWER OF TRACTION ELECTRIC MOTORS FOR ELECTRIC VEHICLES

OpenAIRE

O. Smirnov; A. Borisenko

2017-01-01

Recommendations on choosing the power of the electric motor, depending on the weight of the vehicle, its speed and the run distance in the «only electricity» mode are developed. Based on mathematical modeling and a number of field tests of electric vehicles, a three-dimensional dependance of the power on the weight and the speed set is built and conclusions are presented.

CHOOSING THE POWER OF TRACTION ELECTRIC MOTORS FOR ELECTRIC VEHICLES

Directory of Open Access Journals (Sweden)

O. Smirnov

2017-06-01

Full Text Available Recommendations on choosing the power of the electric motor, depending on the weight of the vehicle, its speed and the run distance in the «only electricity» mode are developed. Based on mathematical modeling and a number of field tests of electric vehicles, a three-dimensional dependance of the power on the weight and the speed set is built and conclusions are presented.

Linking electricity and water models to assess electricity choices at water-relevant scales

International Nuclear Information System (INIS)

Sattler, S; Rogers, J; Macknick, J; Lopez, A; Yates, D; Flores-Lopez, F

2012-01-01

Hydrology/water management and electricity generation projections have been modeled separately, but there has been little effort in intentionally and explicitly linking the two sides of the water–energy nexus. This paper describes a platform for assessing power plant cooling water withdrawals and consumption under different electricity pathways at geographic and time scales appropriate for both electricity and hydrology/water management. This platform uses estimates of regional electricity generation by the Regional Energy Deployment System (ReEDS) as input to a hydrologic and water management model—the Water Evaluation and Planning (WEAP) system. In WEAP, this electricity use represents thermoelectric cooling water withdrawals and consumption within the broader, regional water resource context. Here we describe linking the electricity and water models, including translating electricity generation results from ReEDS-relevant geographies to the water-relevant geographies of WEAP. The result of this analysis is water use by the electric sector at the regional watershed level, which is used to examine the water resource implications of these electricity pathways. (letter)

Electric engineering summary

International Nuclear Information System (INIS)

Kang, Sing Eun; Park, Seong Taek; Lim, Yong Un

1975-03-01

This book is made up six parts, which deals with circuit theory about sinusoidal alternating current, basic current circuit, wave power, distorted wave, two terminal network, distributed circuit, laplace transformation and transfer function, power engineering on line, failure analysis transmission of line, substation and protection device and hydroelectric power plant, electricity machine like DC machine, electric transformer, induction machine and rectifier, electromagnetic on dielectric substance current, electromagnetic, electricity application like lighting engineering, heat transfer and electricity chemistry, industry, industry math with integer, rational number, factorization, matrix and differential.

Advanced Electrical Machines and Machine-Based Systems for Electric and Hybrid Vehicles

Directory of Open Access Journals (Sweden)

Ming Cheng

2015-09-01

Full Text Available The paper presents a number of advanced solutions on electric machines and machine-based systems for the powertrain of electric vehicles (EVs. Two types of systems are considered, namely the drive systems designated to the EV propulsion and the power split devices utilized in the popular series-parallel hybrid electric vehicle architecture. After reviewing the main requirements for the electric drive systems, the paper illustrates advanced electric machine topologies, including a stator permanent magnet (stator-PM motor, a hybrid-excitation motor, a flux memory motor and a redundant motor structure. Then, it illustrates advanced electric drive systems, such as the magnetic-geared in-wheel drive and the integrated starter generator (ISG. Finally, three machine-based implementations of the power split devices are expounded, built up around the dual-rotor PM machine, the dual-stator PM brushless machine and the magnetic-geared dual-rotor machine. As a conclusion, the development trends in the field of electric machines and machine-based systems for EVs are summarized.

The electric power engineering handbook electric power transformer engineering

CERN Document Server

Harlow, James H

2012-01-01

Electric Power Transformer Engineering, Third Edition expounds the latest information and developments to engineers who are familiar with basic principles and applications, perhaps including a hands-on working knowledge of power transformers. Targeting all from the merely curious to seasoned professionals and acknowledged experts, its content is structured to enable readers to easily access essential material in order to appreciate the many facets of an electric power transformer.Topically structured in three parts, the book: * Illustrates for electrical engineers the relevant theories and pri

The Electric Vehicle Development

DEFF Research Database (Denmark)

Wang, Jingyu; Liu, Yingqi; Kokko, Ari

2014-01-01

In order to respond to the energy crisis and environment problem, countries carry out their research and promotion about electric vehicles. As the ten cities one thousand new energy buses started in 2009, the new energy vehicles have been greatly developed in China, while the development...... in three aspects-city environment, government and stakeholders. Then the paper discusses the promotion ways and role of government and consumer. Finally, the paper offers some suggestions to promote electric vehicles in China: focusing on feasibility and adaptability of electric vehicles, playing...... of electric vehicles is not that good. This paper selects four cities-Los Angeles, Kanagawa, Hamburg, Amsterdam-that promote electric vehicles successfully and deeply analyzes the development of electric vehicles in these four cities and analyzes the factors that affect the development of electric vehicles...

Renewable Electricity Futures Study. Volume 2: Renewable Electricity Generation and Storage Technologies

Energy Technology Data Exchange (ETDEWEB)

Augustine, C.; Bain, R.; Chapman, J.; Denholm, P.; Drury, E.; Hall, D.G.; Lantz, E.; Margolis, R.; Thresher, R.; Sandor, D.; Bishop, N.A.; Brown, S.R.; Cada, G.F.; Felker, F.

2012-06-01

The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%-90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT).

Swiss electricity statistics 1996

International Nuclear Information System (INIS)

1997-01-01

This detailed article discusses the following subjects: Survey of electricity supply in Switzerland in 1996; The Swiss electricity balance; Electric power generation; Electric power consumption; Generation, consumption and loads on selected days; Energy trade with other countries; Expansion capacities until 2003; Financial situation and appendix. (orig./RHM) [de

Analysis of Surface Electric Field Measurements from an Array of Electric Field Mills

Science.gov (United States)

Lucas, G.; Thayer, J. P.; Deierling, W.

2016-12-01

Kennedy Space Center (KSC) has operated an distributed array of over 30 electric field mills over the past 18 years, providing a unique data set of surface electric field measurements over a very long timespan. In addition to the electric field instruments there are many meteorological towers around KSC that monitor the local meteorological conditions. Utilizing these datasets we have investigated and found unique spatial and temporal signatures in the electric field data that are attributed to local meteorological effects and the global electric circuit. The local and global scale influences on the atmospheric electric field will be discussed including the generation of space charge from the ocean surf, local cloud cover, and a local enhancement in the electric field that is seen at sunrise.

Sustainable Federal Fleets: Deploying Electric Vehicles and Electric Vehicle Supply Equipment

Energy Technology Data Exchange (ETDEWEB)

2017-01-01

The U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) helps federal agencies reduce petroleum consumption and increase alternative fuel use through its resources for Sustainable Federal Fleets. To assist agencies with the transition to plug-in electric vehicles (PEVs), including battery electric vehicles (BEVs) and plug-in hybrid electric vehicles (PHEVs), FEMP offers technical guidance on electric vehicle supply equipment (EVSE) installations and site-specific planning through partnerships with the National Renewable Energy Laboratory's (NREL's) EVSE Tiger Teams.

Method of electric powertrain matching for battery-powered electric cars

Science.gov (United States)

Ning, Guobao; Xiong, Lu; Zhang, Lijun; Yu, Zhuoping

2013-05-01

The current match method of electric powertrain still makes use of longitudinal dynamics, which can't realize maximum capacity for on-board energy storage unit and can't reach lowest equivalent fuel consumption as well. Another match method focuses on improving available space considering reasonable layout of vehicle to enlarge rated energy capacity for on-board energy storage unit, which can keep the longitudinal dynamics performance almost unchanged but can't reach lowest fuel consumption. Considering the characteristics of driving motor, method of electric powertrain matching utilizing conventional longitudinal dynamics for driving system and cut-and-try method for energy storage system is proposed for passenger cars converted from traditional ones. Through combining the utilization of vehicle space which contributes to the on-board energy amount, vehicle longitudinal performance requirements, vehicle equivalent fuel consumption level, passive safety requirements and maximum driving range requirement together, a comprehensive optimal match method of electric powertrain for battery-powered electric vehicle is raised. In simulation, the vehicle model and match method is built in Matlab/simulink, and the Environmental Protection Agency (EPA) Urban Dynamometer Driving Schedule (UDDS) is chosen as a test condition. The simulation results show that 2.62% of regenerative energy and 2% of energy storage efficiency are increased relative to the traditional method. The research conclusions provide theoretical and practical solutions for electric powertrain matching for modern battery-powered electric vehicles especially for those converted from traditional ones, and further enhance dynamics of electric vehicles.

76 FR 16263 - Revision to Electric Reliability Organization Definition of Bulk Electric System

Science.gov (United States)

2011-03-23

...; Order No. 743-A] Revision to Electric Reliability Organization Definition of Bulk Electric System AGENCY... certain provisions of the Final Rule. Order No. 743 directed the Electric Reliability Organization (ERO) to revise the definition of the term ``bulk electric system'' through the ERO's Reliability Standards...

75 FR 72909 - Revision to Electric Reliability Organization Definition of Bulk Electric System

Science.gov (United States)

2010-11-26

... Bulk-Power System. See Rules Concerning Certification of the Electric Reliability Organization; and... Bulk-Power System in North America because it protects the reliability of the bulk electric system and... Electric Reliability Organization Definition of Bulk Electric System; Final Rule #0;#0;Federal Register...

Electric power annual 1992

Energy Technology Data Exchange (ETDEWEB)

1994-01-06

The Electric Power Annual presents a summary of electric utility statistics at national, regional and State levels. The objective of the publication is to provide industry decisionmakers, government policymakers, analysts and the general public with historical data that may be used in understanding US electricity markets. The Electric Power Annual is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. ``The US Electric Power Industry at a Glance`` section presents a profile of the electric power industry ownership and performance, and a review of key statistics for the year. Subsequent sections present data on generating capability, including proposed capability additions; net generation; fossil-fuel statistics; retail sales; revenue; financial statistics; environmental statistics; electric power transactions; demand-side management; and nonutility power producers. In addition, the appendices provide supplemental data on major disturbances and unusual occurrences in US electricity power systems. Each section contains related text and tables and refers the reader to the appropriate publication that contains more detailed data on the subject matter. Monetary values in this publication are expressed in nominal terms.

Electric fields and electrical insulation

DEFF Research Database (Denmark)

McAllister, Iain Wilson

2002-01-01

The adoption of a field-theoretical approach to problems arising in the framework of electrical insulation is discussed with reference to six main topics, which have been addressed over the last 30 years. These include uniform field electrodes, Green's differential equation, electrode surface...... roughness, induced charge, electrostatic probes, and partial discharge transients, together with several follow-on aspects. Each topic is introduced and thereafter the progress achieved through the use of a field-theoretical approach is reviewed. Because the topics cover a wide spectrum of conditions......, it is amply demonstrated that such an approach can lead to significant progress in many areas of electrical insulation....

Electric Vehicle Technician

Science.gov (United States)

Moore, Pam

2011-01-01

With President Obama's goal to have one million electric vehicles (EV) on the road by 2015, the electric vehicle technician should have a promising and busy future. "The job force in the car industry is ramping up for a revitalized green car industry," according to Greencareersguide.com. An electric vehicle technician will safely troubleshoot and…

77 FR 26607 - Energy Conservation Program: Test Procedures for Electric Motors and Small Electric Motors

Science.gov (United States)

2012-05-04

... Conservation Program: Test Procedures for Electric Motors and Small Electric Motors; Final Rules #0;#0;Federal... Procedures for Electric Motors and Small Electric Motors AGENCY: Office of Energy Efficiency and Renewable... electric motors and small electric motors. That supplemental proposal, along with an earlier proposal from...

Electric conductivity of TlInTe2 monocrystal in strong electric fields

International Nuclear Information System (INIS)

Zarbaliev, M.M.; Godzhaev, Eh.M.; Gadzhiev, V.A.

1980-01-01

Electric condUctivity of the TlInTe 2 single crystal in strong electric fields has been studied in the range of 77-300 K. The electron part of the TlInTe 2 dielectric constant has been found to be 4. The dependence of the activation energy of current carriers on the electric field strength is constructed and the value of the activation energy of current carriers in the absence of an electric field is determined by the extrapolation method. The results of the experiments are in good agreement with the Frenkel-Pool theory, and this affords grounds for asserting that the obtained dependences of electric conductivity on temperature and the electric field strength are defined by variation in the current carrier concentration due to action of the thermal-electron ionization mechanism

Optimal Charge control of Electric Vehicles in Electricity Markets

DEFF Research Database (Denmark)

Lan, Tian; Hu, Junjie; Wu, Guang

2011-01-01

Environment constraints, petroleum scarcity, high price on fuel resources and recent advancements in battery technology have led to emergence of Electric Vehicles (EVs). As increasing numbers of EVs enter the electricity market, these extra loads may cause peak load and need to be properly...... controlled. In this paper, an algorithm is presented for every individual vehicles to minimize the charging cost while satisfying the vehicle owner’s requirements. The algorithm is based on a given future electricity prices and uses dynamic programming. Optimization aims to find the economically optimal...... solution for each vehicle....

Electrical installation calculations basic

CERN Document Server

Kitcher, Christopher

2013-01-01

All the essential calculations required for basic electrical installation workThe Electrical Installation Calculations series has proved an invaluable reference for over forty years, for both apprentices and professional electrical installation engineers alike. The book provides a step-by-step guide to the successful application of electrical installation calculations required in day-to-day electrical engineering practice. A step-by-step guide to everyday calculations used on the job An essential aid to the City & Guilds certificates at Levels 2 and 3Fo

Pervasive Electricity Distribution System

Directory of Open Access Journals (Sweden)

Muhammad Usman Tahir

2017-06-01

Full Text Available Now a days a country cannot become economically strong until and unless it has enough electrical power to fulfil industrial and domestic needs. Electrical power being the pillar of any country’s economy, needs to be used in an efficient way. The same step is taken here by proposing a new system for energy distribution from substation to consumer houses, also it monitors the consumer consumption and record data. Unlike traditional manual Electrical systems, pervasive electricity distribution system (PEDS introduces a fresh perspective to monitor the feeder line status at distribution and consumer level. In this system an effort is taken to address the issues of electricity theft, manual billing, online monitoring of electrical distribution system and automatic control of electrical distribution points. The project is designed using microcontroller and different sensors, its GUI is designed in Labview software.

Underwater electric field detection system based on weakly electric fish

Science.gov (United States)

Xue, Wei; Wang, Tianyu; Wang, Qi

2018-04-01

Weakly electric fish sense their surroundings in complete darkness by their active electric field detection system. However, due to the insufficient detection capacity of the electric field, the detection distance is not enough, and the detection accuracy is not high. In this paper, a method of underwater detection based on rotating current field theory is proposed to improve the performance of underwater electric field detection system. First of all, we built underwater detection system based on the theory of the spin current field mathematical model with the help of the results of previous researchers. Then we completed the principle prototype and finished the metal objects in the water environment detection experiments, laid the foundation for the further experiments.

Renewable Electricity Futures: Exploration of a U.S. Grid with 80% Renewable Electricity

Science.gov (United States)

Mai, Trieu

2013-04-01

Renewable Electricity Futures is an initial investigation of the extent to which renewable energy supply can meet the electricity demands of the contiguous United States over the next several decades. This study explores the implications and challenges of very high renewable electricity generation levels: from 30% up to 90% (focusing on 80%) of all U.S. electricity generation from renewable technologies in 2050. At such high levels of renewable electricity penetration, the unique characteristics of some renewable resources, specifically geographical distribution and variability and un-certainty in output, pose challenges to the operability of the nation's electric system. The study focuses on key technical implications of this environment from a national perspective, exploring whether the U.S. power system can supply electricity to meet customer demand on an hourly basis with high levels of renewable electricity, including variable wind and solar generation. The study also identifies some of the potential economic, environmental, and social implications of deploying and integrating high levels of renewable electricity in the U.S. The full report and associated supporting information is available at: http://www.nrel.gov/analysis/refutures/.

Essays on electricity theft

Science.gov (United States)

Steadman, Keva Ullanda

Electricity theft is a relatively unknown crime with high economic costs. In this dissertation, I try to identify the factors that motivate persons to steal electricity. First, I use a panel dataset of 97 countries spanning the five year period 2003--2007 to estimate a model that describes the effect of the unemployment rate, GDP per capita, male population and urbanization on theft, robbery and homicide rates. The results are consistent with previous empirical work on crime and economic opportunity. The second and main contribution of this paper is to estimate the same model using distribution loss as a proxy for electricity theft. The results show that the unemployment rate, a key explanatory economic factor for crime, cannot explain variation in electricity theft, although there is some evidence, albeit weak, supporting correlation in rich countries. Therefore, policies that target the reduction of property crime through a reduction in unemployment will have no effect on electricity theft. The third contribution relates to the role that political institutions play in the incentives to steal electricity. After control for socioeconomic factors, I find that there is no relationship between political governance indicators and electricity theft. In the second and third chapters, I compare the United States, a high income, low electricity theft country with Jamaica, a middle income, high electricity theft country. The effect of unemployment on electricity theft mirrors the results found in the first chapter. In the United States, electricity theft is affected by changes in economic conditions but in Jamaica, it is not. These results suggest that the state of institutions plays a role in how social norms are determined. Poor countries will be more likely than rich countries to have weak institutions with social norms that encourage electricity theft.

Turkish electricity reform

Energy Technology Data Exchange (ETDEWEB)

Bagdadioglu, Necmiddin [Department of Public Finance, Hacettepe University, 06800 Ankara (Turkey); Odyakmaz, Necmi [E.ON Holding, Armada Business Centre, 06520 Ankara (Turkey)

2009-03-15

Turkish electricity reform has progressed slowly due to internal resistance against privatisation, and gained momentum after Electricity Market Law of 2001, prepared in line with EU Energy Acquis and established required institutional and legal framework. Although the eligibility threshold has reached 39% market opening rate, the dominant position of public both as owner and decision-maker is still the major problem in the sector. Currently Turkey is self-sufficient in electricity, but likely to face shortages in 10 years if the growing demand is not met by either speeding the liberalisation process, or joining the South East Europe Electricity Market. (author)

Materials and electricity

International Nuclear Information System (INIS)

Jaffee, R.I.

1986-01-01

Despite an increase in the intensity of electricity usage, electricity has been reversing its historical trend of reduced cost since 1970 to the point where costs are increasing faster than inflation. Designers and operators on both sides of the meter and the developers of materials from which the electric system is constructed must contribute to the lowering of costs and an increase in reliability for the generation, transmission and distribution, and utilization of electricity. Four specific cases illustrate the role of materials/process improvements to this end. The examples highlight the use of forged or welded integral rotors, improvements in the heat rate of coal-fired plants through higher steam conditions and reduced heat losses, reduced losses through amorphous steel cores for transformers, and reduced ac electric motor losses through silicon variable speed drives. 37 references, 27 figures, 9 tables

A novel estimation of electrical and cooling losses in electric arc furnaces

International Nuclear Information System (INIS)

Trejo, Eder; Martell, Fernando; Micheloud, Osvaldo; Teng, Lidong; Llamas, Armando; Montesinos-Castellanos, Alejandro

2012-01-01

A method to calculate electrical losses and a heat transfer model of a conventional Electric Arc Furnace (EAF) are presented. The application of a novel power theory for the EAF was used to compute electrical losses and it was compared with conventional power calculations. The electrical losses and electrical variables were used as input parameters to the proposed heat transfer model. Chemical energy sources were included as energy inputs to estimate the overall heat transferred including the heat losses in the cooling system. In the heat transfer model the furnace was divided in 11 inner surfaces and the radiation view factors between them were estimated by a commercial finite element software. Variations of the view factors for different arc coverage were evaluated. Different scenarios for cooling panels losses, with respect to arc coverage and thickness of slag layers adhered to cooling system panels, were analyzed. The approach presented in this work allows calculation of energy balances in electrical arc furnaces with low computational resources. Finally, the contribution of this research work is to define a framework for further research oriented to improve both the electrical and thermal energy efficiencies to increase productivity and reduce energy consumption in steel plants. -- Highlights: ► Radiation view factors for the electric arc furnace are estimated. ► Potential reduction in cooling losses is estimated to be 60 kWh/ton. ► Electrical losses are calculated based in the randomness power theory. ► The new approach yields an increase of 10% in the electrical losses. ► An analytic model is used to estimate the radiation mechanism.

CALCULATION OF A MECHANICAL CHARACTERISTIC OF ELECTRIC TRACTION MOTOR OF ELECTRIC VEHICLE

Directory of Open Access Journals (Sweden)

Phuong Le Ngo

2017-01-01

Full Text Available The traction characteristic of an electric vehicle is the main characteristic of mechanical system that reflects its key performance indicators. Implementation of the traction characteristic is based on controlling angular speed and torque of electric traction motor in an automatic control system. The static mechanical characteristic of an electric traction motor in an automatic control system is the most important characteristic that determines weight, size and operating characteristics of an electric traction motor and serves as the basis for design. The most common variants of constructive implementation of a traction electric drive are analyzed, and a scheme is chosen for further design. Lagrange’s equation for electric mechanical system with one degree of freedom is written in generalized coordinates. In order to determine the generalized forces, elementary operation of all moments influencing on a moving car has been calculated. The resulting equation of motion of the electric vehicle corresponding to the design scheme, as well as the expressions for calculation of characteristic points of static mechanical characteristics of traction motor (i.e. the maximum and minimum time, minimum power are obtained. In order to determine the nominal values of the angular velocity and the power of electric traction motor, a method based on ensuring the movement of the vehicle in the standard cycle has been developed. The method makes it possible to calculate characteristic points of the mechanical characteristic with the lowest possible power rating. The algorithm for calculation of mechanical characteristics of the motor is presented. The method was applied to calculate static mechanical characteristic of an electric traction motor for a small urban electric truck.

Renewable Electricity Futures Study. Volume 2. Renewable Electricity Generation and Storage Technologies

Energy Technology Data Exchange (ETDEWEB)

Augustine, Chad [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bain, Richard [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chapman, Jamie [Texas Tech Univ., Lubbock, TX (United States); Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Drury, Easan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hall, Douglas G. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lantz, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thresher, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sandor, Debra [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bishop, Norman A. [Knight Piesold, Denver, CO (United States); Brown, Stephen R. [HDR/DTA, Portland, ME (Untied States); Cada, Glenn F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Felker, Fort [National Renewable Energy Lab. (NREL), Golden, CO (United States); Fernandez, Steven J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Goodrich, Alan C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hagerman, George [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Heath, Garvin [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Neil, Sean [Ocean Renewable Energy Coalition, Portland, OR (United States); Paquette, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States); Young, Katherine [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2012-06-15

The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%–90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT). Learn more at the RE Futures website. http://www.nrel.gov/analysis/re_futures/

Review of Studies Concerning Electromagnetic Field (EMF Exposure Assessment in Europe: Low Frequency Fields (50 Hz–100 kHz

Directory of Open Access Journals (Sweden)

Peter Gajšek

2016-09-01

Full Text Available We aimed to review the findings of exposure assessment studies done in European countries on the exposure of the general public to low frequency electric and magnetic fields (EMFs of various frequencies. The study shows that outdoor average extremely low frequency magnetic fields (ELF-MF in public areas in urban environments range between 0.05 and 0.2 µT in terms of flux densities, but stronger values (of the order of a few µT may occur directly beneath high-voltage power lines, at the walls of transformer buildings, and at the boundary fences of substations. In the indoor environment, high values have been measured close to several domestic appliances (up to the mT range, some of which are held close to the body, e.g., hair dryers, electric shavers. Common sources of exposure to intermediate frequencies (IF include induction cookers, compact fluorescent lamps, inductive charging systems for electric cars and security or anti-theft devices. No systematic measurement surveys or personal exposimetry data for the IF range have been carried out and only a few reports on measurements of EMFs around such devices are mentioned. According to the available European exposure assessment studies, three population exposure categories were classified by the authors regarding the possible future risk analysis. This classification should be considered a crucial advancement for exposure assessment, which is a mandatory step in any future health risk assessment of EMFs exposure.

Review of Studies Concerning Electromagnetic Field (EMF) Exposure Assessment in Europe: Low Frequency Fields (50 Hz–100 kHz)

Science.gov (United States)

Gajšek, Peter; Ravazzani, Paolo; Grellier, James; Samaras, Theodoros; Bakos, József; Thuróczy, György

2016-01-01

We aimed to review the findings of exposure assessment studies done in European countries on the exposure of the general public to low frequency electric and magnetic fields (EMFs) of various frequencies. The study shows that outdoor average extremely low frequency magnetic fields (ELF-MF) in public areas in urban environments range between 0.05 and 0.2 µT in terms of flux densities, but stronger values (of the order of a few µT) may occur directly beneath high-voltage power lines, at the walls of transformer buildings, and at the boundary fences of substations. In the indoor environment, high values have been measured close to several domestic appliances (up to the mT range), some of which are held close to the body, e.g., hair dryers, electric shavers. Common sources of exposure to intermediate frequencies (IF) include induction cookers, compact fluorescent lamps, inductive charging systems for electric cars and security or anti-theft devices. No systematic measurement surveys or personal exposimetry data for the IF range have been carried out and only a few reports on measurements of EMFs around such devices are mentioned. According to the available European exposure assessment studies, three population exposure categories were classified by the authors regarding the possible future risk analysis. This classification should be considered a crucial advancement for exposure assessment, which is a mandatory step in any future health risk assessment of EMFs exposure. PMID:27598182

Status and outlook of solar energy use in Pakistan

International Nuclear Information System (INIS)

Mirza, U.K.

2003-01-01

Pakistan is an energy deficient country, where a large fraction of the population still does not have access to modern day energy services such as electricity. This is due to very limited fossil fuel resources and poor economy, which restrains the import of fossil fuels on a large scale. To overcome energy shortage, Pakistan needs to develop its indigenous energy resources like hydropower, solar and wind. Pakistan lies in an area of one of the highest solar insolation in the world. This vast potential can be exploited to produce electricity, which could be provided to off-grid communities in the northern hilly area and the southern and western deserts. Applications other than electricity production such as solar water heaters and solar cookers also have vast applications. All this will help in both reducing the import of fossil fuels and dependency of people on fuel wood, which in turn will provide some respite for the dwindling forest reserves of Pakistan. Accordingly, the status and outlook of solar energy use in Pakistan is discussed in this paper. In addition, the role of R and D organizations in the promotion of solar energy technologies in Pakistan is also presented including a description of some proposed projects. It is concluded that the current infrastructure has not been able to advance the status of solar energy of Pakistan. Significant efforts are needed to effectively utilize this cheap renewable energy source. (author)

Technology and implementation of electric vehicles and plug‐in hybrid electric vehicles

DEFF Research Database (Denmark)

Hansen, Kenneth; Mathiesen, Brian Vad; Connolly, David

2011-01-01

In this report state of the art electric vehicle and plug‐in hybrid electric vehicle technology is presented to clarify the current and near term development. The current status of diffusion for electric vehicles in Denmark, Sweden and internationally is presented as well as the expected......‐2013). Also the power capabilities may increase meaning that e.g. acceleration capabilities will improve as well as the top speed. This development occurs due to new battery technology that may experience substantial improvements in the coming years. When looking at plug‐in hybrid electric vehicles...... developments. Different business models and policies are also outlined along with a description of the on‐going research and demonstration projects. An analysis of the current and near term electric and plug‐in hybrid electric vehicles indicate that the cost for family cars will not change much, while...

Growth strategies of electric utilities in context of deregulation and liberalization of electricity market

Directory of Open Access Journals (Sweden)

Maria Đogić

2017-01-01

Full Text Available This paper identifies the growth strategies adopted by the electric utilities sector in the context of changes resulting from the deregulation and liberalization of the electricity market. Strategies pursued by the electric utilities sector were rarely the subject of research in the field of strategic management despite the fact that electricity is an indispensable element of everyday life and the economy as a whole. Therefore, a case study of the largest incumbent electric utilities in the Republic of Croatia, Slovenia, Bosnia and Herzegovina, Serbia, Montenegro, and Macedonia has been conducted, and differences in the degree of market liberalization and core features of these companies have been noted. Research findings have shown that the degree of deregulation can affect the growth strategies of electric utilities. In those countries where the degree of deregulation is lower, electric utilities focus on the domestic market. On the other hand, a higher level of deregulation enables electric utilities to achieve their growth through diversification or innovation. Given the fact that the analyzed electric utilities are operating within relatively small economies, they cannot compete with electric utilities in developed countries, and, apart from international electricity trading, are mostly focused on their domestic markets.

Pragmatic electrical engineering fundamentals

CERN Document Server

Eccles, William

2011-01-01

Pragmatic Electrical Engineering: Fundamentals introduces the fundamentals of the energy-delivery part of electrical systems. It begins with a study of basic electrical circuits and then focuses on electrical power. Three-phase power systems, transformers, induction motors, and magnetics are the major topics.All of the material in the text is illustrated with completely-worked examples to guide the student to a better understanding of the topics. This short lecture book will be of use at any level of engineering, not just electrical. Its goal is to provide the practicing engineer with a practi

Earth's electric field

International Nuclear Information System (INIS)

Kelley, M.C.

1978-01-01

The earth becomes charged during thunderstorm activity and discharges through the weak conducting atmosphere. Balloon and rocket studies infer that a high altitude electric field penetrates virtually unattenuated through the atmosphere, at least as far as balloon heights. The field has two primary sources. At low and mid latitudes, interaction between the earth's magnetic field and the neutral wind creates electric fields. At latitudes above 60 0 , the high altitude electrical structure is dominated by the interaction between the solar wind and the earth's magnetic field. The auroral light is emitted by atmospheric atoms and molecules excited by electrons with potentials of many thousands volts. The potentials are induced by the solar wind. Recent satellite data shows that the electrons get this energy by passing through a localized electric field about 6000 km above the auroral zone. Several rocket and satellite experiments used to study the earth's electric field are discussed

Electric sales and revenue 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-10-01

The Electric Sales and Revenue is prepared by the Electric Power Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. Information is provided on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers throughout the US. The data provided in the Electric Sales and Revenue are presented at the national, Census division, State, and electric utility levels. The information is based on annual data reported by electric utilities for the calendar year ending December 31, 1997. 16 figs., 17 tabs.

Electric sales and revenue 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

The Electric Sales and Revenue is prepared by the Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. Information is provided on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers throughout the United States. The data provided in the Electric Sales and Revenue are presented at the national, Census division, State, and electric utility levels. The information is based on annual data reported by electric utilities for the calendar year ending December 31, 1994.

Electric power annual, 1990

International Nuclear Information System (INIS)

1992-01-01

The Electric Power Annual presents a summary of electric utility statistics at the national, regional and State levels. The objective of the publication is to provide industry decisionmakers, government policy-makers, analysts and the general public with historical data that may be used in understanding US electricity markets. ''The Industry at a Glance'' section presents a profile of the electric power industry ownership and performance; a review of key statistics for the year; and projections for various aspects of the electric power industry through 2010. Subsequent sections present data on generating capability, including proposed capability additions; net generation; fossil-fuel statistics; electricity sales, revenue, and average revenue per kilowatthour sold; financial statistics; environmental statistics; and electric power transactions. In addition, appendices provide supplemental data on major disturbances and unusual occurrences. Each section contains related text and tables and refers the reader to the appropriate publication that contains more detailed data on the subject matter

Becoming Our Own Leaders: Decision-Making at School and Home

Science.gov (United States)

Rubin, Ron; Schoenefeld, Jonas

2009-01-01

Children's lives in today's culture are filled with numerous decisions in a pressure-cooker atmosphere of frequently self-destructive peers and overly materialistic, sexually exploitive, and violent media that affect their daily welfare. As a result, too often tragedies result from children's lack of healthy judgment and choices. The case for…

Adequate Funding for Educational Technology

Science.gov (United States)

Angle, Jason B.

2010-01-01

Public schools are currently operating in a pressure-cooker of accountability systems in which they must teach students to high standards and meet ever increasing targets for student proficiency, or face increasingly severe sanctions. Into this mix is thrown educational technology and the funding for that technology. The literature espouses the…

Hawaii Electric System Reliability

Energy Technology Data Exchange (ETDEWEB)

Loose, Verne William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Silva Monroy, Cesar Augusto [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2012-08-01

This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers’ views of reliability “worth” and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers’ views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

On the correlation of electricity spot market prices and photovoltaic electricity generation

International Nuclear Information System (INIS)

Meyer, Tim; Luther, Joachim

2004-01-01

Discussions about market introduction of grid connected photovoltaics (PV) and its costs usually concentrate only on the gross energy produced without taking the time dependency of electricity prices and, thus, the time dependency of the value of PV electricity into account. To make a first approximation of what the effect of the time variance of electricity cost on the value of PV electricity is, the correlation with spot market prices is analysed in this paper. PV is not dispatchable by nature, but is relatively well predictable in the range of one day, if the average of spatially dispersed systems is considered. Thus, this correlation gives a good indication for the additional value of PV electricity

On the correlation of electricity spot market prices and photovoltaic electricity generation

International Nuclear Information System (INIS)

Meyer, T.; Luther, J.

2004-01-01

Discussions about market introduction of grid connected photovoltaics (PV) and its costs usually concentrate only on the gross energy produced without taking the time dependency of electricity prices and, thus, the time dependency of the value of PV electricity into account. To make a first approximation of what the effect of the time variance of electricity cost on the value of PV electricity is, the correlation with spot market prices is analysed in this paper. PV is not dispatchable by nature, but is relatively well predictable in the range of one day, if the average of spatially dispersed systems is considered. Thus, this correlation gives a good indication for the additional value of PV electricity. (Author)

Electricity shut-offs justified with those who refused to pay electricity rates

International Nuclear Information System (INIS)

Anon.

1981-01-01

In its decision of December 18, 1980, the Freiburg Regional Court ordered the complainant, who had complained against electricity shut-offs, to pay the costs of the proceedings after having paid the withheld percentages of electricity rates. In doing so, the Regional Court onfirmed the adverse judgment of May 29, 1980, made by the Frankfurt Local Court ('et' 1980 p. 508). While the Local Courts of Frankfurt and Marburg objected to electricity shut-offs for being unreasonable, it is a widely-held view that one cannot deny the electricity supply utility the right to stop supplying those who boycott the payment of electricity rates. The Regional Court subscribed to this view, giving well-founded grounds. (orig./HSCH) [de

Electricity demand in Kazakhstan

International Nuclear Information System (INIS)

Atakhanova, Zauresh; Howie, Peter

2007-01-01

Properties of electricity demand in transition economies have not been sufficiently well researched mostly due to data limitations. However, information on the properties of electricity demand is necessary for policy makers to evaluate effects of price changes on different consumers and obtain demand forecasts for capacity planning. This study estimates Kazakhstan's aggregate demand for electricity as well as electricity demand in the industrial, service, and residential sectors using regional data. Firstly, our results show that price elasticity of demand in all sectors is low. This fact suggests that there is considerable room for price increases necessary to finance generation and distribution system upgrading. Secondly, we find that income elasticity of demand in the aggregate and all sectoral models is less than unity. Of the three sectors, electricity demand in the residential sector has the lowest income elasticity. This result indicates that policy initiatives to secure affordability of electricity consumption to lower income residential consumers may be required. Finally, our forecast shows that electricity demand may grow at either 3% or 5% per year depending on rates of economic growth and government policy regarding price increases and promotion of efficiency. We find that planned supply increases would be sufficient to cover growing demand only if real electricity prices start to increase toward long-run cost-recovery levels and policy measures are implemented to maintain the current high growth of electricity efficiency

Thermo-electrical systems for the generation of electricity

International Nuclear Information System (INIS)

Bitschi, A.; Froehlich, K.

2010-01-01

This article takes a look at theoretical models concerning thermo-electrical systems for the generation of electricity and demonstrations of technology actually realised. The potentials available and developments are discussed. The efficient use of energy along the whole generation and supply chain, as well as the use of renewable energy sources are considered as being two decisive factors in the attainment of a sustainable energy supply system. The large amount of unused waste heat available today in energy generation, industrial processes, transport systems and public buildings is commented on. Thermo-electric conversion systems are discussed and work being done on the subject at the Swiss Federal Institute of Technology in Zurich is discussed. The findings are discussed and results are presented in graphical form

Advanced electrical power system technology for the all electric aircraft

Science.gov (United States)

Finke, R. C.; Sundberg, G. R.

1983-01-01

The application of advanced electric power system technology to an all electric airplane results in an estimated reduction of the total takeoff gross weight of over 23,000 pounds for a large airplane. This will result in a 5 to 10 percent reduction in direct operating costs (DOC). Critical to this savings is the basic electrical power system component technology. These advanced electrical power components will provide a solid foundation for the materials, devices, circuits, and subsystems needed to satisfy the unique requirements of advanced all electric aircraft power systems. The program for the development of advanced electrical power component technology is described. The program is divided into five generic areas: semiconductor devices (transistors, thyristors, and diodes); conductors (materials and transmission lines); dielectrics; magnetic devices; and load management devices. Examples of progress in each of the five areas are discussed. Bipolar power transistors up to 1000 V at 100 A with a gain of 10 and a 0.5 microsec rise and fall time are presented. A class of semiconductor devices with a possibility of switching up to 100 kV is described. Solid state power controllers for load management at 120 to 1000 V and power levels to 25 kW were developed along with a 25 kW, 20 kHz transformer weighing only 3.2 kg. Previously announced in STAR as N83-24764

Advanced electrical power system technology for the all electric aircraft

Science.gov (United States)

Finke, R. C.; Sundberg, G. R.

1983-01-01

The application of advanced electric power system technology to an all electric airplane results in an estimated reduction of the total takeoff gross weight of over 23,000 pounds for a large airplane. This will result in a 5 to 10 percent reduction in direct operating costs (DOC). Critical to this savings is the basic electrical power system component technology. These advanced electrical power components will provide a solid foundation for the materials, devices, circuits, and subsystems needed to satisfy the unique requirements of advanced all electric aircraft power systems. The program for the development of advanced electrical power component technology is described. The program is divided into five generic areas: semiconductor devices (transistors, thyristors, and diodes); conductors (materials and transmission lines); dielectrics; magnetic devices; and load management devices. Examples of progress in each of the five areas are discussed. Bipolar power transistors up to 1000 V at 100 A with a gain of 10 and a 0.5 microsec rise and fall time are presented. A class of semiconductor devices with a possibility of switching up to 100 kV is described. Solid state power controllers for load management at 120 to 1000 V and power levels to 25 kW were developed along with a 25 kW, 20 kHz transformer weighing only 3.2 kg.

Electric sales and revenue, 1990

International Nuclear Information System (INIS)

1992-01-01

The Electric Sales and Revenue is prepared by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. This publication provides information about sales of electricity, its associated revenue, and the average revenue per kilowatthour sold to residential, commercial, industrial, and other consumers throughout the United States. Previous publications presented data on typical electric bills at specified consumption levels as well as sales, revenues, and average revenue. The sales, revenue, and average revenue per kilowatthour provided in the Electric Sales and Revenue are based on annual data reported by electric utilities for the calendar year ending December 31, 1990. The electric revenue reported by each electric utility includes the revenue billed for the amount of kilowatthours sold, revenue from income, unemployment and other State and local taxes, energy or demand charges, consumer services charges, environmental surcharges, franchise fees, fuel adjustments, and other miscellaneous charges. Average revenue per kilowatthour is defined as the cost per unit of electricity sold and is calculated by dividing retail sales into the associated electric revenue. The sales of electricity, associated revenue, and average revenue per kilowatthour provided in this report are presented at the national, Census division, State, and electric utility levels

Swiss electricity statistics 2001

International Nuclear Information System (INIS)

2002-01-01

This publication by the Association of Swiss Electricity Enterprises for the Swiss Federal Office of Energy (SFOE) provides statistical information on electricity production, trading and consumption in Switzerland in 2001. Apart from a general overview of the Swiss electricity supply that includes details on power generation, energy transfer with neighbouring countries and data on prices, average consumption and capital investment, the publication also includes graphical representations of electrical energy flows in and out of Switzerland. Tables of data give information on electricity production, import and export for the years 1950 to 2001, the data being supplied for each hydrological year and the summer and winter seasons respectively. The production of power in Switzerland is examined in detail. Details are given on the development of production capacities and the various means of production together with their respective shares of total production. Further tables and diagrams provide information on power production in various geographical regions and on the management of pumped storage hydro-electricity schemes. A further chapter deals in detail with the consumption of electricity, its growth between 1984 and 2001 and its use in various sectors. A fifth chapter examines electricity consumption, generation, import and export on single, typical days, presenting data in tables and diagrams. The next chapter examines energy transfer with foreign countries and the trading structures involved. The final two chapters cover new and future power generation capacities and the economic considerations involved in the supply of electricity chapters cover new and future power generation capacities and the economic considerations involved in the supply of electricity

Electricity from biogas

International Nuclear Information System (INIS)

Augenstein, D.; Benemann, J.; Hughes, E.

1994-01-01

Biogas is a medium-Btu methane and carbon dioxide mix produced by bacterial decomposition of organic matter. Its sources include landfills, waste water sludges, and animal wastes. It can fuel energy applications, of which electricity generation is a frequently-preferred option. The greatest current U.S. biogas recovery and energy use is at landfills, where biogas at about 80 landfill sites fuels a total of approximately 300 MWe. Wastewater treatment plants and confined animal waste management systems support additional electric power production. Generation of electricity from biogas can present difficulties due to the generally small scale of the generating facility, variable energy content of the gas, fluctuating availability, contaminant problems, and often-demanding control needs. However, such difficulties are being successfully addressed and economics for electricity generation are often favorable as biogas can be essentially open-quotes freeclose quotes fuel. Biogas recovery and use has the additional advantage of mitigating a potent greenhouse gas. Biogas from U.S. landfills alone could fuel about 1% of U.S. electrical generation while giving climate change benefit equivalent to reducing CO 2 emissions in the electricity sector by more than 10%. Growth in landfill gas use will be facilitated by recent regulations, advances in equipment, and improved management techniques such as open-quotes controlled landfillingclose quotes. The potential for biogas recovery and electricity production from sewage sludges, animal wastes and other organic resources such as agricultural residues is uncertain but probably exceeds the estimate for landfills

Teaching Electricity.

Science.gov (United States)

Iona, Mario

1982-01-01

To clarify the meaning of electrical terms, a chart is used to compare electrical concepts and relationships with a more easily visualized system in which water flows from a hilltop reservoir through a pipe to drive a mill at the bottom of the hill. A diagram accompanies the chart. (Author/SK)

An encyclopedia on domestic electricity

International Nuclear Information System (INIS)

1982-12-01

This book describes the footprint of domestic electrification with domestic energy and the role of electrification, basic knowledge on domestic electrification, the basic things electric equipment in domestic, materials, part and making, demand of electricity, electrification and life, various electric equipment in the kitchen, rationalization of house chore, environment and hygiene like electric iron, electric stove, electric mat and dining wagon, beauty treatment and health, refinement and entertainment and lighting in houses.

Heat-electrical regeneration way to intensive energy saving in an electric arc furnaces

Science.gov (United States)

Kartavtcev, S.; Matveev, S.; Neshporenko, E.

2018-03-01

Energy saving in steel production is of great significance for its large economical scale of 1500 mil t/year and high-energy consumption. Steady trend of last years is an increase of steel production in electric arc furnaces (EAF) with a very high consumption of electricity up to 750 kWh/ton. The intention to reduce so much energy consumption they can reach by many ways. One of such way is a transforming heat energy of liquid steel to electricity and destine it to steel electric arc process. Under certain conditions, it may lead to “zero” consumption of electric power in the process. The development of these conditions leads to the formation of energy-efficient heat schemes, with a minimum electricity consumption from the external network.

76 FR 647 - Energy Conservation Program: Test Procedures for Electric Motors and Small Electric Motors

Science.gov (United States)

2011-01-05

... Electric Motors and Small Electric Motors; Proposed Rule #0;#0;Federal Register / Vol. 76, No. 3... Motors and Small Electric Motors AGENCY: Office of Energy Efficiency and Renewable Energy, Department of... motors and small electric motors, clarify the scope of energy conservation standards for electric motors...

Electricity/oil substitution

International Nuclear Information System (INIS)

Melvin, J.G.

1980-09-01

The extent to which electricity could substitute for imported oil in Canada is assessed and it is concluded that the bulk of projected oil imports could be displaced. This substitution of electricity for oil could be largely completed within two decades, with existing technology, using Canadian resources. The substitution of electricity for imported oil would result in relatively low energy costs and would stimulate economic growth. Energy self-sufficiency through the substitution of electricity for oil is uniquely a Canadian option; it is not open to other industrial countries. The option exists because of Canada's resources of oil sands for essential liquid fuels, hydraulic and nuclear electrical potential, and natural gas as an interim source of energy. While other countries face an energy crisis due to declining supplies of oil, Canada faces opportunities. The policies of Federal and Provincial governments, as perceived by individual decision makers, will have a major influence on Canada's ability to realize opportunities. (auth)

The electricity market 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-10-01

The purpose of the 'Electricity market 2002' publication is to meet the need for generalized and readily accessible information on the conditions on the Nordic market. Iceland is not included in the description. The publication also includes summaries of information from recent years concerning electricity generation and utilization in the Nordic countries, the structure of the electricity market from the players' perspective, trade in electricity in the Nordic countries and in Northern Europe, electricity prices in the Nordic and other countries, and the impact of the electricity sector on the environment. The publication contains data on electricity generation and use during the past years, structure of the electricity market, trade in electricity in the Nordic countries and northern Europe, electricity prices in the Nordic countries and other countries as well as impact of electricity generation system on the environment. The market price of electricity is affected by a number of factors, including fuel prices, availability of water, and the power and energy balances of the various countries. The availability of water in Norway and Sweden has been very good in recent years, which has had a major influence on the price. 1996 was a dry year, which led to a high system price on Nord Pool. The price of electricity then dropped and has remained at a relatively low level up to the year 2001. The price of electricity rose during the spring of 2001 and remained at a higher level also during the summer months. The main reason was that the availability of water was lower than normal in Norway during the early part of the year. This created a higher demand for imported electricity in Norway and caused some apprehension that the year would be dry. The total price of electricity to the end users has not followed the system price development. The total cost of electricity to the end consumers consists of three items, i.e. the price of electricity, the network

Renewable Electricity Futures Study. Volume 1: Exploration of High-Penetration Renewable Electricity Futures

Energy Technology Data Exchange (ETDEWEB)

Mai, T.; Wiser, R.; Sandor, D.; Brinkman, G.; Heath, G.; Denholm, P.; Hostick, D.J.; Darghouth, N.; Schlosser, A.; Strzepek, K.

2012-06-01

The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%-90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT).

Electrical Methods: Resistivity Methods

Science.gov (United States)

Surface electrical resistivity surveying is based on the principle that the distribution of electrical potential in the ground around a current-carrying electrode depends on the electrical resistivities and distribution of the surrounding soils and rocks.

The Electric Car Challenge.

Science.gov (United States)

Diehl, Brian E.

1997-01-01

Describes the Electric Car Challenge during which students applied methods of construction to build lightweight, strong vehicles that were powered by electricity. The activity required problem solving, sheet metal work, electricity, design, and construction skills. (JOW)

Electricity production of Slovakia

International Nuclear Information System (INIS)

Czodor, T.

2003-01-01

Here is examined the spatial structure of electric energy production divided in hydropower plants (through-flow and re-pumping), thermal power plants as the most expensive way of electric energy production and nuclear power plants where high difficulty and long-term realisation of construction projects and spent financial resources are pointed out. Work describes present structure of electric energy production and consumption and refers to alternative electric energy sources

Electrically conductive material

Science.gov (United States)

Singh, J.P.; Bosak, A.L.; McPheeters, C.C.; Dees, D.W.

1993-09-07

An electrically conductive material is described for use in solid oxide fuel cells, electrochemical sensors for combustion exhaust, and various other applications possesses increased fracture toughness over available materials, while affording the same electrical conductivity. One embodiment of the sintered electrically conductive material consists essentially of cubic ZrO[sub 2] as a matrix and 6-19 wt. % monoclinic ZrO[sub 2] formed from particles having an average size equal to or greater than about 0.23 microns. Another embodiment of the electrically conductive material consists essentially at cubic ZrO[sub 2] as a matrix and 10-30 wt. % partially stabilized zirconia (PSZ) formed from particles having an average size of approximately 3 microns. 8 figures.

Electrical actuation of electrically conducting and insulating droplets using ac and dc voltages

International Nuclear Information System (INIS)

Kumari, N; Bahadur, V; Garimella, S V

2008-01-01

Electrical actuation of liquid droplets at the microscale offers promising applications in the fields of microfluidics and lab-on-chip devices. Much prior research has targeted the electrical actuation of electrically conducting liquid droplets using dc voltages (classical electrowetting). Electrical actuation of conducting droplets using ac voltages and the actuation of insulating droplets (using dc or ac voltages) has remained relatively unexplored. This paper utilizes an energy-minimization-based analytical framework to study the electrical actuation of a liquid droplet (electrically conducting or insulating) under ac actuation. It is shown that the electromechanical regimes of classical electrowetting, electrowetting under ac actuation and insulating droplet actuation can be extracted from the generic electromechanical actuation framework, depending on the electrical properties of the droplet, the underlying dielectric layer and the frequency of the actuation voltage. This paper also presents experiments which quantify the influence of the ac frequency and the electrical properties of the droplet on its velocity under electrical actuation. The velocities of droplets moving between two parallel plates under ac actuation are experimentally measured; these velocities are then related to the actuation force on the droplet which is predicted by the electromechanical model developed in this work. It is seen that the droplet velocities are strongly dependent on the frequency of the ac actuation voltage; the cut-off ac frequency, above which the droplet fails to actuate, is experimentally determined and related to the electrical conductivity of the liquid. This paper then analyzes and directly compares the various electromechanical regimes for the actuation of droplets in microfluidic applications

Applying reliability analysis to design electric power systems for More-electric aircraft

Science.gov (United States)

Zhang, Baozhu

The More-Electric Aircraft (MEA) is a type of aircraft that replaces conventional hydraulic and pneumatic systems with electrically powered components. These changes have significantly challenged the aircraft electric power system design. This thesis investigates how reliability analysis can be applied to automatically generate system topologies for the MEA electric power system. We first use a traditional method of reliability block diagrams to analyze the reliability level on different system topologies. We next propose a new methodology in which system topologies, constrained by a set reliability level, are automatically generated. The path-set method is used for analysis. Finally, we interface these sets of system topologies with control synthesis tools to automatically create correct-by-construction control logic for the electric power system.

Derivation of the electric dipole--dipole interaction as an electric hyperfine interaction

International Nuclear Information System (INIS)

Parker, G.W.

1986-01-01

The electric dipole--dipole interaction is derived by assuming that the electron and proton in hydrogen have intrinsic electric dipole moments that interact to give an electric hyperfine interaction. The electric field at the proton due to the electron's presumed dipole moment then gives rise to a contact type term for l = 0 and the normal dipole--dipole term for lnot =0. When combined with our previous derivation of the magnetic hyperfine interaction [Am. J. Phys. 52, 36 (1984)], which used a similar approach, these derivations provide a unified treatment of the interaction of electric and magnetic dipoles. As an application of these results, the product of the electron's and proton's dipole moments is estimated to be less than 10 -29 e 2 cm 2

Flame spread over inclined electrical wires with AC electric fields

KAUST Repository

Lim, Seung J.; Park, Sun H.; Park, Jeong; Fujita, Osamu; Keel, Sang I.; Chung, Suk-Ho

2017-01-01

Flame spread over polyethylene-insulated electrical wires was studied experimentally with applied alternating current (AC) by varying the inclination angle (θ), applied voltage (VAC), and frequency (fAC). For the baseline case with no electric field

Swiss electricity statistics 2000

International Nuclear Information System (INIS)

2001-01-01

This publication by the Association of Swiss Electricity Enterprises for the Swiss Federal Office of Energy (SFOE) provides statistical information on electricity production, trading and consumption in Switzerland in 2000. Apart from a general overview of the Swiss electricity supply that includes details on power generation, energy transfer with neighbouring countries and data on prices, average consumption and capital investment, the publication also includes graphical representations of electrical energy flows in and out of Switzerland. Tables of data give information on electricity production, import and export for the years 1950 to 2000, the data being supplied for each hydrological year and the summer and winter seasons respectively. The production of power in Switzerland is examined in detail. Details are given on the development of production capacities and the various means of production together with their respective shares of total production. Further tables and diagrams provide information on power production in various geographical regions and on the management of pumped storage hydro-electricity schemes. A further chapter deals in detail with the consumption of electricity, its growth between 1984 and 2000 and its use in various sectors. A fifth chapter examines electricity consumption, generation, import and export on single, typical days, presenting data in tables and diagrams. The next chapter examines energy transfer with foreign countries and the trading structures involved. The final two chapters cover new and future power generation capacities and the economic considerations involved in the supply of electricity

Hawaii electric system reliability.

Energy Technology Data Exchange (ETDEWEB)

Silva Monroy, Cesar Augusto; Loose, Verne William

2012-09-01

This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers' views of reliability %E2%80%9Cworth%E2%80%9D and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers' views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

Enhanced electrical conductivity in graphene and boron nitride nanoribbons in large electric fields

Science.gov (United States)

Chegel, Raad

2018-02-01

Based on data of density function theory (DFT) as the input of tight binding model, the electrical conductivity (σ(T)) of graphene nanoribbos (GNRs) and Boron Nitride nanoribbos (BNNRs) under external electric fields with different wide are studied using the Green's function method. The BNNRs are wide band gap semiconductor and they are turned into metal depending on their electric field strength. The σ(T) shows increasing in low temperature region and after reaching the maximum value, it will decrease in high temperature region. In lower temperature ranges, the electrical conductivity of the GNRs is greater than that of the BNNRs. In a low temperature region, the σ(T) of GNRs increases linearly with temperature unlike the BNNRs. The electrical conductivity are strongly dependent on the electric field strength.

Electricity in France

International Nuclear Information System (INIS)

Audigier, Pierre

1999-12-01

Contains Executive Summary and Chapters on: Historical background; The Nationalisation Law of 1946 and the present electricity regulatory framework; Other regulations and policies having an impact on the French electricity system; Forces for and against Liberalisation; The legislative framework in preparation; Electricity costs and prices; The main industrial player. EdF; Key nuclear issues; EdF and the HV transmission network; The non-nationalised distributors; Other players on the generation side; Conclusions. (Author)

Switzerland's electricity supply industry

International Nuclear Information System (INIS)

Inwyler, Ch.

1980-01-01

After a short description of Switzerland's electricity supply industry, the author comments on the production and consumption of electrical energy as well as on Switzerland's role within the European grid. A brief survey of electricity supply as a service is followed by a discussion of the political tools (such as e.g. the referendum, the hearing procedure etc.), which are an essential clue for understanding the position of the electricity supply industry in Switzerland. (Auth.)

Schneider Electric sozdajot set

Index Scriptorium Estoniae

2003-01-01

Maailma juhtiv elektriseadmete müüja Schneider Electric ühendab oma ettevõtted Balti- ja Põhjamaades uude divisjoni, mille nimeks saab Schneider Nordic Baltic. Eestis luuakse AS Schneider Electric Eesti, mis seni tegutses AS-i Lexel Electric nime all

Coupling of magnetospheric electrical effects into the global atmospheric electrical circuit

International Nuclear Information System (INIS)

Hays, P.B.; Roble, R.G.

1979-01-01

A quasi-static model of global atmospheric electricity has been constructed (Hays and Roble, 1978) to study the electrical processes in the lower atmosphere and the coupling between solar- and upper- atmosphere-induced variations superimposed upon the global electrical circuit. The paper reviews the essential features of this model and discusses the results obtained thus far on the effects of magnetospheric convection and substorms on the global atmospheric electrical circuit. A schematic diagram of the global quasi-static model is given. It is assumed that thunderstorms act as dipole generators, each with a positive center at the top of the cloud and a negative center a few kilometers lower than the positive center

Electric machine

Science.gov (United States)

El-Refaie, Ayman Mohamed Fawzi [Niskayuna, NY; Reddy, Patel Bhageerath [Madison, WI

2012-07-17

An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

Wavelet-based information filtering for fault diagnosis of electric drive systems in electric ships.

Science.gov (United States)

Silva, Andre A; Gupta, Shalabh; Bazzi, Ali M; Ulatowski, Arthur

2017-09-22

Electric machines and drives have enjoyed extensive applications in the field of electric vehicles (e.g., electric ships, boats, cars, and underwater vessels) due to their ease of scalability and wide range of operating conditions. This stems from their ability to generate the desired torque and power levels for propulsion under various external load conditions. However, as with the most electrical systems, the electric drives are prone to component failures that can degrade their performance, reduce the efficiency, and require expensive maintenance. Therefore, for safe and reliable operation of electric vehicles, there is a need for automated early diagnostics of critical failures such as broken rotor bars and electrical phase failures. In this regard, this paper presents a fault diagnosis methodology for electric drives in electric ships. This methodology utilizes the two-dimensional, i.e. scale-shift, wavelet transform of the sensor data to filter optimal information-rich regions which can enhance the diagnosis accuracy as well as reduce the computational complexity of the classifier. The methodology was tested on sensor data generated from an experimentally validated simulation model of electric drives under various cruising speed conditions. The results in comparison with other existing techniques show a high correct classification rate with low false alarm and miss detection rates. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Renewable Electricity Futures Study. Volume 1. Exploration of High-Penetration Renewable Electricity Futures

Energy Technology Data Exchange (ETDEWEB)

Hand, M. M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Baldwin, S. [U.S. Dept. of Energy, Washington, DC (United States); DeMeo, E. [Renewable Energy Consulting, Chicago, IL (United States); Reilly, J. M. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Mai, T. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Arent, D. [Joint Inst. for Strategic Energy Analysis, Boulder, CO (United States); Porro, G. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Meshek, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sandor, D. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2012-06-15

The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%–90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT). Learn more at the RE Futures website. http://www.nrel.gov/analysis/re_futures/

Method for protecting an electric generator

Science.gov (United States)

Kuehnle, Barry W.; Roberts, Jeffrey B.; Folkers, Ralph W.

2008-11-18

A method for protecting an electrical generator which includes providing an electrical generator which is normally synchronously operated with an electrical power grid; providing a synchronizing signal from the electrical generator; establishing a reference signal; and electrically isolating the electrical generator from the electrical power grid if the synchronizing signal is not in phase with the reference signal.

Mastering one's electricity purchases

International Nuclear Information System (INIS)

Belon, D.

2005-01-01

Manager of about 50000 public lighting areas, the inter-cities energy syndicate of Loire (SIEL) has started in 2003 a procedure in order to chose his electric power supplier conformably with the new rules of public electricity purchase and with the new organization of the electricity market. This article presents this approach and its experience feedback, concretized by the European call for bids launched by SIEL for the annual purchase of about 186 GWh of electric power. (J.S.)

The latest electrical installation (I)

International Nuclear Information System (INIS)

Won, Jong Su

1976-04-01

This book deals with the latest electrical installation. The contents of this book are construction electrical installation, regulations related electrical installation, foundation and principle of wiring, main line feeder, lighting installation, power of wiring, main line feeder, lighting installation, power installation, method to read structure drawing for electrical construct drawing electric lamp wiring diagram, working drawing, material and tools and method of construction of electrical installation on types of wiring construction, metallic conduit, rigid poly-vinyl conduit wiring, bus duct work, cable work and insulation out of metal lathed.

Electric control of wave vector filtering in a hybrid magnetic-electric-barrier nanostructure

Science.gov (United States)

Kong, Yong-Hong; Lu, Ke-Yu; He, Ya-Ping; Liu, Xu-Hui; Fu, Xi; Li, Ai-Hua

2018-06-01

We theoretically investigate how to manipulate the wave vector filtering effect by a traverse electric field for electrons across a hybrid magnetic-electric-barrier nanostructure, which can be experimentally realized by depositing a ferromagnetic stripe and a Schottky-metal stripe on top and bottom of a GaAs/Al x Ga1- x As heterostructure, respectively. The wave vector filtering effect is found to be related closely to the applied electric field. Moreover, the wave vector filtering efficiency can be manipulated by changing direction or adjusting strength of the traverse electric field. Therefore, such a nanostructure can be employed as an electrically controllable electron-momentum filter for nanoelectronics applications.

Study on Electricity Business Expansion and Electricity Sales Based on Seasonal Adjustment

Science.gov (United States)

Zhang, Yumin; Han, Xueshan; Wang, Yong; Zhang, Li; Yang, Guangsen; Sun, Donglei; Wang, Bolun

2017-05-01

[1] proposed a novel analysis and forecast method of electricity business expansion based on Seasonal Adjustment, we extend this work to include the effect the micro and macro aspects, respectively. From micro aspect, we introduce the concept of load factor to forecast the stable value of electricity consumption of single new consumer after the installation of new capacity of the high-voltage transformer. From macro aspects, considering the growth of business expanding is also stimulated by the growth of electricity sales, it is necessary to analyse the antecedent relationship between business expanding and electricity sales. First, forecast electricity consumption of customer group and release rules of expanding capacity, respectively. Second, contrast the degree of fitting and prediction accuracy to find out the antecedence relationship and analyse the reason. Also, it can be used as a contrast to observe the influence of customer group in different ranges on the prediction precision. Finally, Simulation results indicate that the proposed method is accurate to help determine the value of expanding capacity and electricity consumption.

Quality electric motor repair: A guidebook for electric utilities

Energy Technology Data Exchange (ETDEWEB)

Schueler, V.; Douglass, J.

1995-08-01

This guidebook provides utilities with a resource for better understanding and developing their roles in relation to electric motor repair shops and the industrial and commercial utility customers that use them. The guidebook includes information and tools that utilities can use to raise the quality of electric motor repair practices in their service territories.

Section I: Basic Electricity. Syllabus in Trade Electricity-Electronics.

Science.gov (United States)

New York State Education Dept., Albany. Bureau of Occupational and Career Curriculum Development.

This section describes the first of a three part curriculum in trade electricity-electronics (each part is described in a separate volume). It presents a unit of 6 to 10 weeks duration which develops only those competencies necessary to all electricity or electronics employment. A flow chart indicates how an individual student's program can be…

Electric power in Canada 1992

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

Electric power in Canada is given a comprehensive review by the Electricity Branch of the Department of Natural Resources Canada. The Electric Power Industry is scrutinized for electricity consumption, generation, trade and pricing across all of Canada. 98 tabs. 26 figs.

Electric power in Canada 1992

International Nuclear Information System (INIS)

1993-01-01

Electric power in Canada is given a comprehensive review by the Electricity Branch of the Department of Natural Resources Canada. The Electric Power Industry is scrutinized for electricity consumption, generation, trade and pricing across all of Canada. 98 tabs. 26 figs

Second-home electricity consumption

International Nuclear Information System (INIS)

Andersen, Frits M.; Christensen, Morten S.; Jensen, Ole Michael; Kofoed, Niels-Ulrik; Morthorst, Poul Erik

2008-01-01

In Denmark, electricity consumption in first and second homes has developed quite differently. Since 1990, electricity consumption in ordinary residences has grown moderately, while consumption in weekend and second homes has increased considerably. In turn, this development has been blamed on a growing number of luxury cottages, new legislation permitting senior citizens to have their permanent address in their second home and a growing number of electric appliances. In order to examine the growing electricity consumption in second homes and to estimate future demand, a multidisciplinary study combining top-down and bottom-up analyses was conducted, i.e., combining models using aggregated economic parameters and feasibility studies using technical parameters, respectively. The top-down estimation showed that changes in electricity consumption in second homes correlate to changes in income. The bottom-up estimation showed that consumption was mainly affected by the frequency with which second homes were used in the winter time. This indicates that additional second homes, increased full-time use and intensified use of electric appliances are the main reasons for the observed increases in electricity consumption. Luxury tourism use and senior citizens' that use a few per cent of the second homes as their home contribute to a minor degree to the overall increase of electricity consumption. Scenarios show that this development may accelerate with increased leisure time, increased use and more permanent settlement in second homes

Energy-Saving Sintering of Electrically Conductive Powders by Modified Pulsed Electric Current Heating Using an Electrically Nonconductive Die

Science.gov (United States)

Ito, Mikio; Kawahara, Kenta; Araki, Keita

2014-04-01

Sintering of Cu and thermoelectric Ca3Co4O9 was tried using a modified pulsed electric current sintering (PECS) process, where an electrically nonconductive die was used instead of a conventional graphite die. The pulsed electric current flowed through graphite punches and sample powder, which caused the Joule heating of the powder compact itself, resulting in sintering under smaller power consumption. Especially for the Ca3Co4O9 powder, densification during sintering was also accelerated by this modified PECS process.

Effects of electric discharges on polymers

International Nuclear Information System (INIS)

Bagirov, M.A.

2002-01-01

Full text: One of the reasons for the worsening of electrical properties of polymeric isolation in use in the effect of the electric discharges which developing in the gas inclusions and in the interlayer inside the isolation itself. The electrical discharges in the gas gap lead to the electrical growing old and the worsening of its electro physical qualities. We have learned the changes of electrical properties (dielectrical permeability and dielectrical loss, and electrical conductivity, electrical strength) of polymer films under the influence of electrical discharges. This paper shows the ways of increase of stability of polymers to the electrical discharges

Electricity Information 2013 with 2012 data

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-01

Electricity Information provides a comprehensive review of historical and current market trends in the OECD electricity sector, including 2012 preliminary data. An Introduction, notes, definitions and auxiliary information are provided in Part I. Part II of the publication provides an overview of the world electricity developments in 2011, covering world electricity and heat production, input fuel mix, supply and consumption, and electricity imports and exports. A greater focus is given to the 34 OECD countries with more detailed information covering production, installed capacity, input energy mix to electricity and heat production, consumption, electricity trades, input fuel prices and end-user electricity prices. Part III of the publication provides a corresponding statistical overview of developments in the world and OECD electricity and heat market for 2011, as well as monthly OECD production and trade electricity data for 2012. Part IV provides, in tabular form, detailed and comprehensive statistical coverage of the power and heat industry developments for each of the OECD member countries and for OECD and IEA regional aggregates. It provides comprehensive statistical details on overall energy consumption, economic indicators, electricity and heat production by energy form and plant type, electricity imports and exports, sectoral energy and electricity consumption as well as prices for electricity and electricity input fuels for each country and regional aggregate.

Electricity and the environment

International Nuclear Information System (INIS)

1991-09-01

The objective of the Symposium was to provide a comprehensive assessment of the environmental and health factors as well as the economic factors involved in supplying electricity services, and to suggest a framework within which these issues should be taken into account in making future plans and decisions on electricity production and use. The potential role of different ways of meeting electricity service requirements was also to be analysed, taking into consideration both demand side and supply side options in the light of their comparative economic, environmental and health related impacts. Four Expert Groups considered key issues: the environmental implications of energy and electricity supply and demand; energy sources and technologies for electricity generation; comparative environmental and health effects of different energy systems for electricity generation; and the incorporation of environmental and health impacts into policy, planning and decision making for the electricity sector. During the Symposium, keynote addresses and invited papers presented by leading experts and policy makers provided additional related information. In this volume the background papers are presented. The proceedings have been published separately, and the individual papers in both volumes have been indexed separately for INIS. Refs, figs and tabs

Electricity supply in India

International Nuclear Information System (INIS)

Abbott, H.J.

1993-09-01

This briefing deals with the electricity supply industry in India in two parts. In the first, the structure and organization of the industry is described under sections dealing with national government involvement, energy policy, state electricity boards, regional electricity boards, state corporations, the private sector and private investment in the power sector including foreign investment. Secondly, the power supply system is described covering generation, plant load factor, non-utility generation, nuclear power, transmission and distribution, system losses and electricity consumption. (8 tables) (UK)

Electrically conductive cellulose composite

Science.gov (United States)

Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

2010-05-04

An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

Electricity markets theories and applications

CERN Document Server

Lin, Jeremy

2017-01-01

Electricity Markets: Theories and Applications offers students and practitioners a clear understanding of the fundamental concepts of the economic theories, particularly microeconomic theories, as well as information on some advanced optimization methods of electricity markets. The authors--noted experts in the field--cover the basic drivers for the transformation of the electricity industry in both the United States and around the world and discuss the fundamentals of power system operation, electricity market design and structures, and electricity market operations. The text also explores advanced topics of power system operations and electricity market design and structure including zonal versus nodal pricing, market performance and market power issues, transmission pricing, and the emerging problems electricity markets face in smart grid and micro-grid environments. The authors also examine system planning under the context of electricity market regime. They explain the new ways to solve problems with t...

77 FR 39858 - Revisions to Electric Reliability Organization Definition of Bulk Electric System and Rules of...

Science.gov (United States)

2012-07-05

... bulk electric system reliability through steady state power flow, and contain a transient stability... Commission 18 CFR Part 40 Revisions to Electric Reliability Organization Definition of Bulk Electric System... definition of ``bulk electric system'' developed by the North American Electric Reliability Corporation (NERC...

Road traffic injuries among riders of electric bike/electric moped in southern China.

Science.gov (United States)

Zhang, Xujun; Yang, Yaming; Yang, Jie; Hu, Jie; Li, Yang; Wu, Ming; Stallones, Lorann; Xiang, Henry

2018-05-19

Electric bike/moped-related road traffic injuries have become a burgeoning public health problem in China. The objective of this study was to identify the prevalence and potential risk factors of electric bike/moped-related road traffic injuries among electric bike/moped riders in southern China. A cross-sectional study was used to interview 3,151 electric bike/moped riders in southern China. Electric bike/moped-related road traffic injuries that occurred from July 2014 to June 2015 were investigated. Data were collected by face-to-face interviews and analyzed between July 2015 and June 2017. The prevalence of electric bike/moped-related road traffic injuries among the investigated riders was 15.99%. Electric bike/moped-related road traffic injuries were significantly associated with category of electric bike (adjusted odds ratio [AOR] = 1.36, 95% confidence interval [CI], 1.01-1.82), self-reported confusion (AOR = 1.77, 95% CI, 1.13-2.78), history of crashes (AOR = 6.14, 95% CI, 4.68-8.07), running red lights (AOR = 3.57, 95% CI, 2.42-5.25), carrying children while riding (AOR = 1.96, 95% CI, 1.37-2.85), carrying adults while riding (AOR = 1.68, 95% CI, 1.23-2.28), riding in the motor lane (AOR = 2.42, 95% CI, 1.05-3.93), and riding in the wrong traffic direction (AOR = 1.63, 95% CI, 1.13-2.35). In over 77.58% of electric bike/moped-related road traffic crashes, riders were determined by the police to be responsible for the crash. Major crash-causing factors included violating traffic signals or signs, careless riding, speeding, and riding in the wrong lane. Traffic safety related to electric bikes/moped is becoming more problematic with growing popularity compared with other 2-wheeled vehicles. Programs need to be developed to prevent electric bike/moped-related road traffic injuries in this emerging country.

Fundamentals of electrical drives

CERN Document Server

Veltman, André; De Doncker, Rik W

2007-01-01

Provides a comprehensive introduction to various aspects of electrical drive systems. This volume provides a presentation of dynamic generic models that cover all major electrical machine types and modulation/control components of a drive as well as dynamic and steady state analysis of transformers and electrical machines.

Online forecasting of electrical load for distributed management of plug-in electric vehicles

OpenAIRE

Basu , Kaustav; Ovalle , Andres; Guo , Baoling; Hably , Ahmad; Bacha , Seddik; Hajar , Khaled

2016-01-01

International audience; The paper aims at making online forecast of electrical load at the MV-LV transformer level. Optimal management of the Plug-in Electric Vehicles (PEV) charging requires the forecast of the electrical load for future hours. The forecasting module needs to be online (i.e update and make forecast for the future hours, every hour). The inputs to the predictor are historical electrical and weather data. Various data driven machine learning algorithms are compared to derive t...

Review on Automotive Power Generation System on Plug-in Hybrid Electric Vehicles & Electric Vehicles

Directory of Open Access Journals (Sweden)

Leong Yap Wee

2016-01-01

Full Text Available Regenerative braking is a function to recharge power bank on the Plug-in electric vehicles (PHEV and electric vehicles (EV. The weakness of this system is, it can only perform its function when the vehicle is slowing down or by stepping the brake foot pedal. In other words, the electricity recharging system is inconsistent, non-continuous and geography dependent. To overcome the weakness of the regenerative braking system, it is suggested that to apply another generator which is going to be parallel with the regenerative braking system so that continuous charging can be achieved. Since the ironless electricity generator has a less counter electromotive force (CEMF comparing to an ironcored electricity generator and no cogging torque. Applying the ironless electricity generator parallel to the regenerative braking system is seen one of the options which creates sustainable charging system compared to cored electricity generator.

Essays on electricity markets

Energy Technology Data Exchange (ETDEWEB)

Rud, Linda

2009-07-01

The report covers several topics of electricity markets: The first essay, 'Selected Topics on Early Electricity Market Design in Norway' studies market design issues in establishing the market-based Norwegian electricity market. Essays 2-4 focus on issues of network congestion: 'Capacity Charges: A Price Adjustment Process for Managing Congestion in Electricity Transmission Networks' presents the capacity charge approach for managing transmission constraints in electricity networks. 'Understanding the Stochastics of Nodal Prices: Price Processes in a Constrained Network' seeks a further understanding of stochastic nodal prices processes. 'Investment Evaluation in a Constrained Electricity Network with Stochastic Nodal Price Processes' studies how the interaction of the competitive market and the capacitated network affects the evaluation of investments under uncertainty, and points out potential pitfalls of evaluation. In the last essay, 'A Newsboy Model Perspective on the Power Market: The Case of a Wind Power Producer' we discuss aspects of optimal bidding for a wind power producer. (Author)

Essays on electricity markets

Energy Technology Data Exchange (ETDEWEB)

Rud, Linda

2009-07-01

The report covers several topics of electricity markets: The first essay, 'Selected Topics on Early Electricity Market Design in Norway' studies market design issues in establishing the market-based Norwegian electricity market. Essays 2-4 focus on issues of network congestion: 'Capacity Charges: A Price Adjustment Process for Managing Congestion in Electricity Transmission Networks' presents the capacity charge approach for managing transmission constraints in electricity networks. 'Understanding the Stochastics of Nodal Prices: Price Processes in a Constrained Network' seeks a further understanding of stochastic nodal prices processes. 'Investment Evaluation in a Constrained Electricity Network with Stochastic Nodal Price Processes' studies how the interaction of the competitive market and the capacitated network affects the evaluation of investments under uncertainty, and points out potential pitfalls of evaluation. In the last essay, 'A Newsboy Model Perspective on the Power Market: The Case of a Wind Power Producer' we discuss aspects of optimal bidding for a wind power producer. (Author)

The electricity market 2002

International Nuclear Information System (INIS)

2002-01-01

The purpose of the 'Electricity market 2002' publication is to meet the need for generalized and readily accessible information on the conditions on the Nordic market. Iceland is not included in the description. The publication also includes summaries of information from recent years concerning electricity generation and utilization in the Nordic countries, the structure of the electricity market from the players' perspective, trade in electricity in the Nordic countries and in Northern Europe, electricity prices in the Nordic and other countries, and the impact of the electricity sector on the environment. The publication contains data on electricity generation and use during the past years, structure of the electricity market, trade in electricity in the Nordic countries and northern Europe, electricity prices in the Nordic countries and other countries as well as impact of electricity generation system on the environment. The market price of electricity is affected by a number of factors, including fuel prices, availability of water, and the power and energy balances of the various countries. The availability of water in Norway and Sweden has been very good in recent years, which has had a major influence on the price. 1996 was a dry year, which led to a high system price on Nord Pool. The price of electricity then dropped and has remained at a relatively low level up to the year 2001. The price of electricity rose during the spring of 2001 and remained at a higher level also during the summer months. The main reason was that the availability of water was lower than normal in Norway during the early part of the year. This created a higher demand for imported electricity in Norway and caused some apprehension that the year would be dry. The total price of electricity to the end users has not followed the system price development. The total cost of electricity to the end consumers consists of three items, i.e. the price of electricity, the network charges and

Alaska Village Electric Load Calculator

Energy Technology Data Exchange (ETDEWEB)

Devine, M.; Baring-Gould, E. I.

2004-10-01

As part of designing a village electric power system, the present and future electric loads must be defined, including both seasonal and daily usage patterns. However, in many cases, detailed electric load information is not readily available. NREL developed the Alaska Village Electric Load Calculator to help estimate the electricity requirements in a village given basic information about the types of facilities located within the community. The purpose of this report is to explain how the load calculator was developed and to provide instructions on its use so that organizations can then use this model to calculate expected electrical energy usage.

Electric sales and revenue: 1993

Energy Technology Data Exchange (ETDEWEB)

1995-01-01

The Electric Sales and Revenue is prepared by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. This publication provides information about sales of electricity, its associated revenue, and the average revenue per kilowatthour sold to residential, commercial, industrial, and other consumers throughout the United States. The sales, revenue, and average revenue per kilowatthour data provided in the Electric Sales and Revenue are based on annual data reported by electric utilities for the calendar year ending December 31, 1993. Operating revenue includes energy charges, demand charges, consumer service charges, environmental surcharges, fuel adjustments, and other miscellaneous charges. The revenue does not include taxes, such as sales and excise taxes, that are assessed on the consumer and collected through the utility. Average revenue per kilowatthour is defined as the cost per unit of electricity sold and is calculated by dividing retail sales into the associated electric revenue. Because electric rates vary based on energy usage, average revenue per kilowatthour are affected by changes in the volume of sales. The sales of electricity, associated revenue, and average revenue per kilowatthour data provided in this report are presented at the national, Census division, State, and electric utility levels.

Saving electricity in a hurry. Dealing with temporary shortfalls in electricity supplies

Energy Technology Data Exchange (ETDEWEB)

none

2005-07-01

Blackouts are normally the result of imbalances in electricity supply and demand. A brief blackout is mostly an inconvenience. But persistent shortfalls ? those lasting days, weeks, or months ? can cause economic disruption and danger to human life in our technology-rich societies. Saving Electricity in a Hurry describes some of the recent power shortfalls, from Norway to New Zealand, from Tokyo to Arizona and the policies these regions used to quickly reduce their power consumption. How did the whole country of Sweden cut its power consumption by 4% in only three days? How did California save 14% in only a few months? While the temporary shortfalls in electricity supplies described in this book are relatively rare events, they disproportionately shape future energy policies. Saving Electricity in a Hurry shows that countries can quickly reduce electricity consumption without harming the economy as much as blackouts or unplanned curtailments. The strategies are diverse, unique and often surprisingly cheap. They include mass media campaigns ? where a good joke can save a Megawatt ? improvements in equipment efficiency and quickly adjusting electricity prices. This book explains how California replaced a million traffic signals with energy-saving models, how millions of Tokyo residents raised their thermostat settings, and how New Zealanders took shorter showers, all quickly enough to help avoid imminent blackouts. Finally, it connects these policies to the traditional goal of ?saving electricity slowly?.

Electrical installations and regulations

CERN Document Server

Whitfield, J F

1966-01-01

Electrical Installations and Regulations focuses on the regulations that apply to electrical installations and the reasons for them. Topics covered range from electrical science to alternating and direct current supplies, as well as equipment for providing protection against excess current. Cables, wiring systems, and final subcircuits are also considered, along with earthing, discharge lighting, and testing and inspection.Comprised of 12 chapters, this book begins with an overview of electrical installation work, traits of a good electrician, and the regulations governing installations. The r

Solar-coupled electric vehicles

International Nuclear Information System (INIS)

Willer, B.

1993-01-01

An electrical drive is an alternative to the present internal combustion engines. The electric car produces no exhaust gas where it is used and drives practically noiselessly. The energy required for driving is usually taken from an electro-chemical battery. The necessary electricity generation generates emission and CO 2 , depending on the primary energy used. An alternative is provided by electricity generation with the aid of regenerative energy. Apart from hydroelectric and wind energy, solar energy can make a considerable contribution in the future. (orig.) [de

78 FR 72877 - Arkansas Electric Corporation v. Oklahoma Gas and Electric Company; Notice of Complaint

Science.gov (United States)

2013-12-04

... Electric Corporation v. Oklahoma Gas and Electric Company; Notice of Complaint Take notice that on November... Commission (Commission), 18 CFR 385.206, Arkansas Electric Corporation (Complainant) filed a formal complaint against Oklahoma Gas and Electric Company (Respondents), alleging that the Respondent's Production Formula...

Three aspects of the Germany-France comparison on electricity. Electricity production and consumption in Germany

International Nuclear Information System (INIS)

Laponche, Bernard

2014-01-01

As a comparative overview of the French and German situation regarding electric power, a first article proposes tables and graphs illustrating data evolution, and brief comments about these evolutions. Comparison focuses on household electricity consumption, on electricity exchanges, and on the production of electricity based on renewable energies. An appendix proposes a presentation of the German policy for energy transition: principles and objectives, phasing out nuclear, implementation. Then, an article, illustrated by data tables and graphs, discusses the evolution of electric power production and consumption in Germany between 2000 and 2013. The author addresses power final consumption, power total production and exchanges, the components of electric power production, and greenhouse gas emissions (by fossil fuel, by sector, and by electricity and heat production)

Electric power monthly, August 1993

Energy Technology Data Exchange (ETDEWEB)

1993-08-13

The Electric Power Monthly (EPM) presents monthly electricity statistics. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. The EPM is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the US, Census division, and State levels for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions.

Electric power monthly, September 1993

Energy Technology Data Exchange (ETDEWEB)

1993-09-17

The Electric Power Monthly (EPM) presents monthly electricity statistics. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. The EPM is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the US, Census division, and State levels for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions.

Electricity in South Africa

International Nuclear Information System (INIS)

Davis, Mark; Steyn, Grove

1998-09-01

Contains Executive Summary and Chapters on: Introductory background; The South African energy sector; The development and regulation of the South African electricity supply industry; Electricity supply and demand; Eskom: South Africa's public utility; Electricity distribution; Household electrification; Regional integration and environmental issues; Regulation and emerging policies - pointers to the future. (Author)

Second-home electricity consumption

Energy Technology Data Exchange (ETDEWEB)

Andersen, Frits M.; Morthorst, Poul Erik [Risoe, Systems Analysis Department, Technical University of Denmark, P.O. Box 49, DK-4000 Roskilde (Denmark); Christensen, Morten S.; Kofoed, Niels-Ulrik [Esbensen Consulting Engineers, Carl Jacobsens Vej 25D, DK-2500 Valby (Denmark); Jensen, Ole Michael [Danish Building Research Institute, Department of Energy and Environment, University of Aalborg, P.O. Box 119, DK-2970 Horsholm (Denmark)

2008-01-15

In Denmark, electricity consumption in first and second homes has developed quite differently. Since 1990, electricity consumption in ordinary residences has grown moderately, while consumption in weekend and second homes has increased considerably. In turn, this development has been blamed on a growing number of luxury cottages, new legislation permitting senior citizens to have their permanent address in their second home and a growing number of electric appliances. In order to examine the growing electricity consumption in second homes and to estimate future demand, a multidisciplinary study combining top-down and bottom-up analyses was conducted, i.e., combining models using aggregated economic parameters and feasibility studies using technical parameters, respectively. The top-down estimation showed that changes in electricity consumption in second homes correlate to changes in income. The bottom-up estimation showed that consumption was mainly affected by the frequency with which second homes were used in the winter time. This indicates that additional second homes, increased full-time use and intensified use of electric appliances are the main reasons for the observed increases in electricity consumption. Luxury tourism use and senior citizens' that use a few per cent of the second homes as their home contribute to a minor degree to the overall increase of electricity consumption. Scenarios show that this development may accelerate with increased leisure time, increased use and more permanent settlement in second homes. (author)

7 CFR 58.730 - Filling containers.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Filling containers. 58.730 Section 58.730 Agriculture... Procedures § 58.730 Filling containers. Hot fluid cheese from the cookers may be held in hotwells or hoppers... shall effectively measure the desired amount of product into the pouch or container in a sanitary manner...

Supplementing consumer insights at Electrolux by mining social media: An exploratory case study

OpenAIRE

Chaudhary, Amit

2011-01-01

Purpose – The aim of this thesis is to explore the possibility of text mining social media, for consumer insights from an organizational perspective. Design/methodology/approach – An exploratory, single case embedded case study with inductive approach and partially mixed, concurrent, dominant status mixed method research design. The case study contains three different studies to try to triangulate the research findings and support research objective of using social media for consumer insights...

Quality electricity lines of external power systems electric traction DC

Directory of Open Access Journals (Sweden)

A.V. Petrov

2012-08-01

Full Text Available The results of studies that compare and analyze the numerical values of some key indicators quality electricity in the lines of the external power supply system the electric traction DC. As a supplement are additional and fundamental values of energy losses in them.

Electrical capacity and resistance determination of emitting electric transducer

International Nuclear Information System (INIS)

Alba Fernandez, J.; Ramis Soriano, J.

2000-01-01

In this work we calculate the electrical resistance and capacity of emitting electric transducer, which is mainly formed, in direct relationship with its properties, by a ceramic capacitor. Our aim is to motivate the students with an attractive element in order to carry out traditional measurements of the charge and discharge transients of a capacitor, implementing high resistance setups. (Author) 5 refs

Renewable Electricity Futures Study. Volume 4: Bulk Electric Power Systems: Operations and Transmission Planning

Energy Technology Data Exchange (ETDEWEB)

Milligan, M.; Ela, E.; Hein, J.; Schneider, T.; Brinkman, G.; Denholm, P.

2012-06-01

The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%-90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT).

With electricity, a new ambition for France. Recommendation by the electricity sector

International Nuclear Information System (INIS)

2017-01-01

This publication first outlines the role and importance of electric power and of the electricity sector for the French economy, society and population, for the environment, and for innovation. It also outlines the role and perspectives of this sector for consumers, territories, jobs, and rural growth, and for a stronger France in Europe and a stronger Europe in the world. It proposes graphs and data illustrating electricity trade balance, production and consumption, and then formulates a set of diagnoses and recommendations made by the UFE (a French professional body of the electricity sector) regarding the struggle against climate change, the evolution of the electricity system towards a greater flexibility to meet consumer and territory expectations, a controlled price evolution with a perspective of new services, a higher competitiveness and a guaranteed supply safety for France, and a social and economic transformation of the sector

Testing and development of electric vehicle batteries for EPRI Electric Transportation Program

Science.gov (United States)

1985-11-01

Argonne National Laboratory conducted an electric-vehicle battery testing and development program for the Electric Power Research Institute. As part of this program, eighteen battery modules previously developed by Johnson Controls, Inc. were tested. This type of battery (EV-2300 - an improved state-of-the-art lead-acid battery) was designed specifically for improved performance, range, and life in electric vehicles. In order to obtain necessary performance data, the batteries were tested under various duty cycles typical of normal service. This program, supported by the Electric Power Research Institute, consisted of three tasks: determination of the effect of cycle life vs peak power and rest period, determination of the impact of charge method on cycle life, and evaluation of the EV-2300 battery system. Two supporting studies were also carried out: one on thermal management of electric-vehicle batteries and one on enhanced utilization of active material in lead-acid batteries.

Slovenian and Spanish electricity markets

International Nuclear Information System (INIS)

Bregar, Z.

2004-01-01

Spanish electricity market has served as a basic model in the construction of the electricity market in Slovenia. However, in the final phase of its development additional solutions were adopted from other European and worldwide electricity markets. The electricity market thus obtained is in some aspects more complex and in others simpler with regard to the original model. This article describes two of the new solutions on the Slovenian electricity market: the introduction of numerous standardized electric energy products (Band, Peak, Off-peak, Hourly power etc.) to be traded on completely separate markets, and the introduction of continuous, real-time type trading on all of them but the hourly market.(author)

Electric sales and revenue 1991

International Nuclear Information System (INIS)

1993-04-01

The Electric Sales and Revenue is prepared by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. This publication provides information about sales of electricity, its associated revenue, and the average revenue per kilowatthour sold to residential, commercial, industrial, and other consumers throughout the United States. Previous publications presented data on typical electric bills at specified consumption levels as well as sales, revenue, and average revenue. The sales of electricity, associated revenue, and average revenue per kilowatthour provided in this report are presented at the national, Census division, State, and electric utility levels

Fire protection electrical engineering

International Nuclear Information System (INIS)

Oh, Jung Min

2000-03-01

This book concentrates of electricity with current, voltage, power, ohms law, access of resistance, electrolytic analysis and battery, static on frictional electricity and electrostatic induction, coulomb's law, Gauss's law, condenser and capacity, magmatism on magnetic field and magnetic line of force, magnetic circuit, electromagnetic force, electromotive current, basic alternating current circuit, circuit network analysis, three-phase current, non-sinusoidal alternating current, transient phenomena, semiconductor, electric measurement on measurement over resistance, power, power rate and circuit tester, automatic control on introduction, term, classification, foundation of sequence control, logic circuit and basic logic circuit and electric equipment.

Electricity and the environment

International Nuclear Information System (INIS)

1991-01-01

The objective of the Symposium was to provide a comprehensive assessment of the environmental and health factors as well as the economic factors involved in supplying electricity services, and to suggest a framework within which these issues should be taken into account in making future plans and decisions on electricity production and use. The potential role of different ways of meeting electricity service requirements was also to be analysed, taking into consideration both demand side and supply side options in the light of their comparative economic, environmental and health related impacts. Four Expert Groups considered key issues: the environmental implications of energy and electricity supply and demand; energy sources and technologies for electricity generation; comparative environmental and health effects of different energy systems for electricity generation; and the incorporation of environmental and health impacts into policy, planning and decision making for the electricity sector. During the Symposium, keynote addresses and invited papers presented by leading experts and policy makers provided additional related information. The Proceedings contain all the addresses and papers presented (which are also indexed separately) together with summaries of the discussions that took place. The Key Issues Papers are presented in a separate publication. Refs, figs and tabs

Electric glass capturing markets

Energy Technology Data Exchange (ETDEWEB)

Wikman, K.; Wikstroem, T.

1996-11-01

Electric glass has found its place on the construction market. In public buildings, electrically heatable windows are becoming the leading option for large glass walls. Studies on detached houses, both new and renovated, show that floor heating combined with electrically heatable windowpanes is the best choice with respect to resident`s comfort. (orig.)

Optimal scheduling for electric heat booster under day-ahead electricity and heat pricing

DEFF Research Database (Denmark)

Cai, Hanmin; You, Shi; Bindner, Henrik W.

2017-01-01

Multi-energy system (MES) operation calls for active management of flexible resources across energy sectors to improve efficiency and meet challenging environmental targets. Electric heat booster, a solution for Domestic Hot Water (DHW) preparation under Low-Temperature-District-Heating (LTDH......) context, is identified as one of aforementioned flexible resources for electricity and heat sectors. This paper extends the concept of optimal load scheduling under day-ahead pricing from electricity sector only to both electricity and heat sectors. A case study constructing day-ahead energy prices...

Some applications of solar energy in Thailand. Research report No. 61

Energy Technology Data Exchange (ETDEWEB)

Htun, M N; Aftab, M P; Ramachandran, P N

1976-06-01

Solar energy for process heat is identified as the application with potential for widescale use in rural areas rather than urban centres of Thailand. Three applications of solar energy, namely distillation, drying, and cooking are investigated. The units for the study are designed with low cost, flexibility and durability as the aim. The production efficiency of a conventional solar still is improved by the use of internal or external mirrors. To improve the production and efficiency of a solar still, a suspension of activated carbon particles is introduced into the still. However, the most significant improvement in efficiency and production occurs when the solar still is filled and operated with a static bed of burnt rice husk. The solar dryer, drying tapioca chips can reduce moisture content of around 71% down to 14% within 8 hours of operation. The solar dryer performs more efficiently and effectively than open floor drying. The solar cooker is inconvenient to use and operate and the potential for widescale use is concluded to be remote unless social habits change and the cooker made more comfortable to utilize.

Reduction of aflatoxin in rice by different cooking methods.

Science.gov (United States)

Sani, Ali Mohamadi; Azizi, Eisa Gholampour; Salehi, Esmaeel Ataye; Rahimi, Khadije

2014-07-01

Rice (Oryza sativa Linn) is one of the basic diets in the north of Iran. The aim of present study was to detect total aflatoxin (AFT) in domestic and imported rice in Amol (in the north of Iran) and to evaluate the effect of different cooking methods on the levels of the toxin. For this purpose, 42 rice samples were collected from retail stores. The raw samples were analysed by enzyme-linked immunosorbent assay (ELISA) technique for toxin assessment and then submitted to two different cooking methods including traditional local method and in rice cooker. After treatment, AFT was determined. Results show that the average concentration of AFT in domestic and imported samples was 1.08 ± 0.02 and 1.89 ± 0.87 ppb, respectively, which is lower than national and European Union standards. The highest AFT reduction (24.8%) was observed when rice samples were cooked by rice cooker but the difference with local method was not statistically significant (p > 0.05). © The Author(s) 2012.

Characteristics of indoor radon and its progeny in a Japanese dwelling while using air appliances.

Science.gov (United States)

Pornnumpa, C; Tokonami, S; Sorimachi, A; Kranrod, C

2015-11-01

Characteristics of radon and its progeny were investigated in different air conditions by turning four types of indoor air appliances on and off in a two-story concrete Japanese dwelling. The four appliances were air conditioner, air cleaner, gas heater and cooker hood. The measurements were done using two devices: (1) a Si-based semiconductor detector for continuous measurement of indoor radon concentration and (2) a ZnS(Ag) scintillation counting system for equilibrium-equivalent radon concentration. Throughout the entire experiment, the cooker hood was the most effective in decreasing indoor radon concentration over a long period of time and the less effective was the air conditioner, while the air cleaner and gas heater did not affect the concentration of radon. However, the results measured in each air condition will differ according to the lifestyles and activities of the inhabitants. In this study, indoor radon and its progeny in a Japanese dwelling will be characterised by the different air conditions. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Thermal energy storage for electricity-driven space heating in a day-ahead electricity market

DEFF Research Database (Denmark)

Pensini, Alessandro

2012-01-01

Thermal Energy Storage (TES) in a space heating (SH) application was investigated. The study aimed to determine the economic benefits of introducing TES into an electricity-driven SH system under a day-ahead electricity market. The performance of the TES was assessed by comparing the cost...... of electricity in a system with a TES unit to the case where no storage is in use and the entire heat requirement is fulfilled by purchasing electricity according to the actual load. The study had two goals: 1. Determining how the size – in terms of electricity input (Pmax) and energy capacity (Emax...

electric vehicle

Directory of Open Access Journals (Sweden)

W. R. Lee

1999-01-01

Full Text Available A major problem facing battery-powered electric vehicles is in their batteries: weight and charge capacity. Thus, a battery-powered electric vehicle only has a short driving range. To travel for a longer distance, the batteries are required to be recharged frequently. In this paper, we construct a model for a battery-powered electric vehicle, in which driving strategy is to be obtained such that the total travelling time between two locations is minimized. The problem is formulated as an optimization problem with switching times and speed as decision variables. This is an unconventional optimization problem. However, by using the control parametrization enhancing technique (CPET, it is shown that this unconventional optimization is equivalent to a conventional optimal parameter selection problem. Numerical examples are solved using the proposed method.

Danish electricity supply. Statistics 2003

International Nuclear Information System (INIS)

2004-01-01

The Association of Danish Electric Utilities each year issues the statistical yearbook 'Danish electricity supply'. By means of brief text, figures, and tables a description is given of the electric supply sector. The report presents data for the year 2003 for consumption, prices of electric power, power generation and transmission, and trade. (ln)

Danish electricity supply. Statistics 2000

International Nuclear Information System (INIS)

2001-07-01

The Association of Danish Electric Utilities each year issues the statistical yearbook 'Danish electricity supply'. By means of brief text, figures, and tables a description is given of the electric supply sector. The report presents data for the year 2000 for consumption, prices of electric power; power generation and transmission, and trade. (ln)

Danish electricity supply. Statistics 2002

International Nuclear Information System (INIS)

2003-01-01

The Association of Danish Electric Utilities each year issues the statistical yearbook 'Danish electricity supply'. By means of brief text, figures, and tables a description is given of the electric supply sector. The report presents data for the year 2002 for consumption, prices of electric power; power generation and transmission, and trade. (ln)

Electricity Bill [second reading

International Nuclear Information System (INIS)

Hooper, G.; Williams, C.C.P.; Ezra, D.

1989-01-01

The Parliamentary Under-Secretary at the Department of Energy introduced the second reading of the Electricity Bill which provides for the restructuring and privatisation of the electricity supply industry throughout Great Britain. Three features at the heart of the Government's proposals are mentioned - first that the proposals will promote competition in electricity generation and supply of electricity so there will be a downward pressure on costs and prices, second is a new deal for customers and third is the security of electricity supply which will be ensured by the diversity of suppliers. The benefits of the scheme are outlined and then specific details of the Bill are considered. The debate which followed lasted six hours and is reported verbatim. The issues raised included environmental effects, efficiency, energy conservation, research and development and investment. (UK)

World green electricity, sustaining investments

International Nuclear Information System (INIS)

Le Jannic, N.

2013-01-01

The contribution of the green production to the world production of electricity reached 20.2% in 2011, it means a slight increase in respect to the figure of 2010: 19.8%. Green electricity is the second source of electricity behind fossil energy (67.9%) but before nuclear power (11.7%). The decrease in nuclear power due to the Fukushima accident has automatically benefited green electricity. The figures show the importance of China, China is now the first electricity producer in the world before US and also passed US for the production of green electricity. At the world scale the production of green electricity can break down into: hydro energy (80.5%), wind energy (10.3%), biomass (6.2%), geothermal energy (1.6%) and solar energy (1.4%). The crisis has slowed down the investment in renewable energies in Europe. (A.C.)

Electric distribution systems

CERN Document Server

Sallam, A A

2010-01-01

"Electricity distribution is the penultimate stage in the delivery of electricity to end users. The only book that deals with the key topics of interest to distribution system engineers, Electric Distribution Systems presents a comprehensive treatment of the subject with an emphasis on both the practical and academic points of view. Reviewing traditional and cutting-edge topics, the text is useful to practicing engineers working with utility companies and industry, undergraduate graduate and students, and faculty members who wish to increase their skills in distribution system automation and monitoring."--

Electricity from biomass

International Nuclear Information System (INIS)

Price, B.

1998-11-01

Electricity from biomass assesses the potential of biomass electricity for displacing other more polluting power sources and providing a relatively clean and ecologically friendly source of energy; discusses its environmental and economic effects, while analysing political and institutional initiatives and constraints; evaluates key factors, such as energy efficiency, economics, decentralisation and political repurcussions; considers the processes and technologies employed to produce electricity from biomass; and discusses the full range of incentives offered to producers and potential producers and the far-reaching implications it could have for industry, society and the environment. (author)

Electric Current Solves Mazes

Science.gov (United States)

Ayrinhac, Simon

2014-01-01

We present in this work a demonstration of the maze-solving problem with electricity. Electric current flowing in a maze as a printed circuit produces Joule heating and the right way is instantaneously revealed with infrared thermal imaging. The basic properties of electric current can be discussed in this context, with this challenging question:…

The electricity prices in the European Union. The role of renewable energies and regulatory electric market reforms

International Nuclear Information System (INIS)

Moreno, Blanca; López, Ana J.; García-Álvarez, María Teresa

2012-01-01

The European Union electricity market has been gradually liberalized since 1990s. Theoretically, competitive markets should lead to efficiency gains in the economy thus reducing electricity prices. However, there is a controversial debate about the real effects of the electricity liberalization on electricity prices. Moreover, the increased generation of electricity from renewable energies RES-E (Electricity from Renewable Energy Sources) is also integrated in wholesale market reducing wholesale prices, but the final effect over household prices is not clear. In order to contribute to this debate, this paper provides an empirical investigation into the electricity prices determinants. In fact we develop econometric panel models to explore the relationship between the household electricity prices and variables related to the renewable energy sources and the competition in generation electricity market. More specifically we use a panel data set provided by Eurostat and covering 27 European Union countries during the period 1998–2009. Our results suggest that electricity prices increase with the deployment of RES-E and with the expansion of greenhouse gas emissions produced by energy industries- as a European Union CO 2 emission trading scheme exists. Results also reveal that country's characteristics can affect household electricity prices. -- Highlights: ► Electricity liberalized markets should lead to reduce electricity prices. ► The use of renewable energies (RES) reduce wholesale electricity prices. ► However, household electricity prices are increasing in European Union. ► Panel data models are developed to investigate the effect of RES and electricity competition on household electricity prices. ► We find that the deployment of RES increases prices paid by consumers in a liberalized market.

Electrically Conductive Anodized Aluminum Surfaces

Science.gov (United States)

Nguyen, Trung Hung

2006-01-01

Anodized aluminum components can be treated to make them sufficiently electrically conductive to suppress discharges of static electricity. The treatment was conceived as a means of preventing static electric discharges on exterior satin-anodized aluminum (SAA) surfaces of spacecraft without adversely affecting the thermal-control/optical properties of the SAA and without need to apply electrically conductive paints, which eventually peel off in the harsh environment of outer space. The treatment can also be used to impart electrical conductivity to anodized housings of computers, medical electronic instruments, telephoneexchange equipment, and other terrestrial electronic equipment vulnerable to electrostatic discharge. The electrical resistivity of a typical anodized aluminum surface layer lies between 10(exp 11) and 10(exp 13) Omega-cm. To suppress electrostatic discharge, it is necessary to reduce the electrical resistivity significantly - preferably to anodized surface becomes covered and the pores in the surface filled with a transparent, electrically conductive metal oxide nanocomposite. Filling the pores with the nanocomposite reduces the transverse electrical resistivity and, in the original intended outer-space application, the exterior covering portion of the nanocomposite would afford the requisite electrical contact with the outer-space plasma. The electrical resistivity of the nanocomposite can be tailored to a value between 10(exp 7) and 10(exp 12) Omega-cm. Unlike electrically conductive paint, the nanocomposite becomes an integral part of the anodized aluminum substrate, without need for adhesive bonding material and without risk of subsequent peeling. The electrodeposition process is compatible with commercial anodizing production lines. At present, the electronics industry uses expensive, exotic, electrostaticdischarge- suppressing finishes: examples include silver impregnated anodized, black electroless nickel, black chrome, and black copper. In

Cryosurgery with Pulsed Electric Fields

Science.gov (United States)

Daniels, Charlotte S.; Rubinsky, Boris

2011-01-01

This study explores the hypothesis that combining the minimally invasive surgical techniques of cryosurgery and pulsed electric fields will eliminate some of the major disadvantages of these techniques while retaining their advantages. Cryosurgery, tissue ablation by freezing, is a well-established minimally invasive surgical technique. One disadvantage of cryosurgery concerns the mechanism of cell death; cells at high subzero temperature on the outer rim of the frozen lesion can survive. Pulsed electric fields (PEF) are another minimally invasive surgical technique in which high strength and very rapid electric pulses are delivered across cells to permeabilize the cell membrane for applications such as gene delivery, electrochemotherapy and irreversible electroporation. The very short time scale of the electric pulses is disadvantageous because it does not facilitate real time control over the procedure. We hypothesize that applying the electric pulses during the cryosurgical procedure in such a way that the electric field vector is parallel to the heat flux vector will have the effect of confining the electric fields to the frozen/cold region of tissue, thereby ablating the cells that survive freezing while facilitating controlled use of the PEF in the cold confined region. A finite element analysis of the electric field and heat conduction equations during simultaneous tissue treatment with cryosurgery and PEF (cryosurgery/PEF) was used to study the effect of tissue freezing on electric fields. The study yielded motivating results. Because of decreased electrical conductivity in the frozen/cooled tissue, it experienced temperature induced magnified electric fields in comparison to PEF delivered to the unfrozen tissue control. This suggests that freezing/cooling confines and magnifies the electric fields to those regions; a targeting capability unattainable in traditional PEF. This analysis shows how temperature induced magnified and focused PEFs could be used to

Cryosurgery with pulsed electric fields.

Directory of Open Access Journals (Sweden)

Charlotte S Daniels

Full Text Available This study explores the hypothesis that combining the minimally invasive surgical techniques of cryosurgery and pulsed electric fields will eliminate some of the major disadvantages of these techniques while retaining their advantages. Cryosurgery, tissue ablation by freezing, is a well-established minimally invasive surgical technique. One disadvantage of cryosurgery concerns the mechanism of cell death; cells at high subzero temperature on the outer rim of the frozen lesion can survive. Pulsed electric fields (PEF are another minimally invasive surgical technique in which high strength and very rapid electric pulses are delivered across cells to permeabilize the cell membrane for applications such as gene delivery, electrochemotherapy and irreversible electroporation. The very short time scale of the electric pulses is disadvantageous because it does not facilitate real time control over the procedure. We hypothesize that applying the electric pulses during the cryosurgical procedure in such a way that the electric field vector is parallel to the heat flux vector will have the effect of confining the electric fields to the frozen/cold region of tissue, thereby ablating the cells that survive freezing while facilitating controlled use of the PEF in the cold confined region. A finite element analysis of the electric field and heat conduction equations during simultaneous tissue treatment with cryosurgery and PEF (cryosurgery/PEF was used to study the effect of tissue freezing on electric fields. The study yielded motivating results. Because of decreased electrical conductivity in the frozen/cooled tissue, it experienced temperature induced magnified electric fields in comparison to PEF delivered to the unfrozen tissue control. This suggests that freezing/cooling confines and magnifies the electric fields to those regions; a targeting capability unattainable in traditional PEF. This analysis shows how temperature induced magnified and focused

Dynamic electricity pricing for electric vehicles using stochastic programming