WorldWideScience

Sample records for electrical components library

  1. Electrical Components Library for HAWC2

    DEFF Research Database (Denmark)

    Cutululis, Nicolaos A.; Larsen, Torben J.; Sørensen, Poul

    and Aalborg University. In this project, the focus is on the development of a simulation platform for wind turbine systems using different simulation tools. This report presents the electric component library developed for use in the aeroelastic code HAWC2. The developed library includes both steady state...... was developed. The model includes the dynamics of the rotor fluxes. The model is suitable for a more detailed investigation of the mechanical - electrical interaction, both under normal and fault operation. For the variable speed wind turbine, a steadystate model, typically used in aeroelastic design...

  2. Electrical components library for HAWC2; Wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Cutululis, N.A.; Larsen, Torben J.; Soerensen, Poul; Hansen, Anca D. (Risoe National Lab., DTU, Wind Energy Dept., Roskilde (DK)); Iov, F. (Aalborg Univ., Institute of Energy Technology (DK))

    2007-12-15

    The work presented in this report is part of the EFP project called ''A Simulation Platform to Model, Optimize and Design Wind Turbines'' partly funded by the Danish Energy Authority under contract number 1363/04-0008. The project is carried out in cooperation between Risoe National Laboratory and Aalborg University. In this project, the focus is on the development of a simulation platform for wind turbine systems using different simulation tools. This report presents the electric component library developed for use in the aeroelastic code HAWC2. The developed library includes both steady state and dynamical models for fixed and variable speed wind turbines. A simple steady-state slip model was developed for the fixed speed wind turbine. This model is suitable for aeroelastic design of wind turbines under normal operation. A dynamic model of an induction generator for the fixed speed wind turbine was developed. The model includes the dynamics of the rotor fluxes. The model is suitable for a more detailed investigation of the mechanical-electrical interaction, both under normal and fault operation. For the variable speed wind turbine, a steadystate model, typically used in aeroelastic design, was implemented. The model can be used for normal and, to some extent, for fault operation. The reduced order dynamic model of a DFIG was implemented. The model includes only the active power controller and can be used for normal operation conditions. (au)

  3. Library thermohydraulic components for training simulators

    International Nuclear Information System (INIS)

    Castelao Caruana, M. J.; Di Benedetto, A.; Pierini, J.P.

    2013-01-01

    The thermohydraulic components Library was modeled in MatLab/Simulink®. This library owns Pipe type components (pump, control valve and / or heaters), storage tanks (Open, Closed and Equilibrium Water Vapor-Air) and Heat Exchangers (Co-Current, Counter-Current and U-tubes). Each component can be attached to other components through the component library Header, in order to create a more complex thermal-hydraulic system which in turn can interact with other thermal-hydraulic systems. (author)

  4. Electrical equipment design library

    International Nuclear Information System (INIS)

    1994-01-01

    This book guides the design supervision, construction order for electrical equipment. The contents of this library are let's use electricity like this, leading-in-pole and casual power, electric pole install below 300KVA, electric pole install below 301∼1000KVA, electric pole install exceed 1000KVA, rooftop install exceed 1000KVA, CUBICLE type, 154KV services. It adds an appendix.

  5. Building Component Library: An Online Repository to Facilitate Building Energy Model Creation; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Fleming, K.; Long, N.; Swindler, A.

    2012-05-01

    This paper describes the Building Component Library (BCL), the U.S. Department of Energy's (DOE) online repository of building components that can be directly used to create energy models. This comprehensive, searchable library consists of components and measures as well as the metadata which describes them. The library is also designed to allow contributors to easily add new components, providing a continuously growing, standardized list of components for users to draw upon.

  6. Electrical and non-electrical environment of wind turbine main components

    DEFF Research Database (Denmark)

    Holboell, J.; Henriksen, M.; Olsen, R.S.

    of the electrical components or even lead to catastrophic component failure. In the present paper, results are presented from investigations on existing standards which give detailed descriptions of the environmental and operational conditions of wind turbine components. It is found that there is currently a lack...... of application standards for wind turbine electrical equipment. Component-level environmental requirements as given in equipment-specific standards are compared with the environment described in the IEC's 61400 series concerning wind turbines. Based on methods defined in IEC 60721, the non-electrical environment...... of wind turbine is described by means of specific classes. In the paper, new class combinations are suggested covering the different operating conditions the components are exposed to. The class combinations include factors of climatic, mechanical and chemical character. The factors occur in different...

  7. Principal component analysis as a tool for library design: a case study investigating natural products, brand-name drugs, natural product-like libraries, and drug-like libraries.

    Science.gov (United States)

    Wenderski, Todd A; Stratton, Christopher F; Bauer, Renato A; Kopp, Felix; Tan, Derek S

    2015-01-01

    Principal component analysis (PCA) is a useful tool in the design and planning of chemical libraries. PCA can be used to reveal differences in structural and physicochemical parameters between various classes of compounds by displaying them in a convenient graphical format. Herein, we demonstrate the use of PCA to gain insight into structural features that differentiate natural products, synthetic drugs, natural product-like libraries, and drug-like libraries, and show how the results can be used to guide library design.

  8. A Fixed Point VHDL Component Library for a High Efficiency Reconfigurable Radio Design Methodology

    Science.gov (United States)

    Hoy, Scott D.; Figueiredo, Marco A.

    2006-01-01

    Advances in Field Programmable Gate Array (FPGA) technologies enable the implementation of reconfigurable radio systems for both ground and space applications. The development of such systems challenges the current design paradigms and requires more robust design techniques to meet the increased system complexity. Among these techniques is the development of component libraries to reduce design cycle time and to improve design verification, consequently increasing the overall efficiency of the project development process while increasing design success rates and reducing engineering costs. This paper describes the reconfigurable radio component library developed at the Software Defined Radio Applications Research Center (SARC) at Goddard Space Flight Center (GSFC) Microwave and Communications Branch (Code 567). The library is a set of fixed-point VHDL components that link the Digital Signal Processing (DSP) simulation environment with the FPGA design tools. This provides a direct synthesis path based on the latest developments of the VHDL tools as proposed by the BEE VBDL 2004 which allows for the simulation and synthesis of fixed-point math operations while maintaining bit and cycle accuracy. The VHDL Fixed Point Reconfigurable Radio Component library does not require the use of the FPGA vendor specific automatic component generators and provide a generic path from high level DSP simulations implemented in Mathworks Simulink to any FPGA device. The access to the component synthesizable, source code provides full design verification capability:

  9. Study the Application of Strategic Management Components in Academic Libraries in Isfahan City

    Directory of Open Access Journals (Sweden)

    Mojtaba Darvishi Chadegani

    2013-03-01

    Full Text Available This research aimed at investigating the application of strategic management components in libraries of Isfahan University, Isfahan University of Technology, and Isfahan University of Medical Sciences and the research method was descriptive survey study. The population consisted of managers and librarians of academic libraries in Isfahan city(134 persons.To gather the data, a researcher-made questionnaire with 40 questions was used and for the content validity, the face validity and construct validity, the factor analysis of questionnaire using KMO and Bartlett test were estimated 0/89. Using Cronbach’s Alpha the reliability of the questionnaire was estimated 0.97. For analyzing the data SPSS software was used.The findings showed the application of components was higher than average except one of the components. The results of Hotteling showed that the effects of all components were nott the same, considering the component ofexchange of information was highest and care about the strategic affairs was the lowest. The findings showed that there was significance based on demographic factors, major and type of work. But no significance difference was seen based on demographic factors, university, type of library, and years in service (p<0.05.

  10. Piezoelectric components wirelessly driven by dipole antenna-like electric field generator

    Energy Technology Data Exchange (ETDEWEB)

    Bhuyan, S., E-mail: elesatya@nus.edu.sg [Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576 (Singapore); Kumar, R.; Panda, S.K. [Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576 (Singapore); Hu, J. [Lab of Precision Drive, Nanjing University of Aeronautics and Astronautics, Nanjing 210026 (China)

    2011-08-25

    Highlights: > Wireless energy transmission technique. > Dipole antenna-like electric field generator. > Piezoelecctric resonance. > Finite element analyses. > Simulations and experimental verifications. - Abstract: A new technique of transmitting electric energy wirelessly to piezoelectric components by using a dipole antenna-like electric field generator is explored. Two square size brass plate-shaped live and ground electrodes are used to form a dipole antenna-like electric field generator. When the dipole antenna-like electric field generator in electric resonance with an inductor, a maximum output power of 2.72 mW and an energy conversion efficiency of 0.0174% have been achieved wirelessly by the piezoelectric plate area of 40 mm{sup 2} operating in the thickness vibration mode, placed at the center 4 mm away from the antenna plane with an optimum electrical load of 1365 {Omega}, resonant frequency of 782 kHz, 1 cm electrodes separation, 2500 cm{sup 2} electrode area of dipole antenna-like structure, and input ac source power of 15.58 W applied to the series of dipole antenna-like structure and inductor. The theoretically calculated results have been validated by the experimental studies. It is seen that at the resonance frequency and optimum electrical load, the output power of the wirelessly driven piezoelectric component decreases with the size of piezoelectric component, distance of piezoelectric component from the electrode of antenna plane, but increases with the antenna electrode area.

  11. Virtual Library: An essential component of virtual education

    Directory of Open Access Journals (Sweden)

    M zarghani

    2015-06-01

    Full Text Available Abstract Introduction: Library is one of the essential elements of universities which provide some important educational needs of students. Virtual education can not be exempted and virtual libraries are important support for virtual training programs. The purpose of this study is to evaluate the viewpoint of administrators and students in virtual education centers about the virtual library, its role and resources. Methods: This study was a descriptive survey. The research instrument was a researcher made questionnaire that its validity and reliability was confirmed. The study population consisted of 19 virtual training centers in Tehran city. Out of 19 centers, simple randomized sampling was done in five Centers. The sample size was 360 students. Data collection was conducted online and descriptive statistics using SPSS 18 and Excel software were used. Results: The results showed that viewpoints of administrators and students about the mission and services of virtual libraries in some cases were similar and in some cases were different. One of the administrators’ reasons for setting up a virtual learning system was lifelong learning, and lack of knowledge about virtual libraries was the reason for inadequate use of virtual libraries. The best format of virtual library from the administrators’ and students’ viewpoint, was portal document format (PDF. Conclusion: One of the most important function of a virtual library, is lifelong learning and empowering users to provide information and educational needs. The main reason for not setting up a virtual library is t lack of knowledge about it.

  12. Advanced Electrical Materials and Components Development: An Update

    Science.gov (United States)

    Schwarze, Gene E.

    2005-01-01

    The primary means to develop advanced electrical components is to develop new and improved materials for magnetic components (transformers, inductors, etc.), capacitors, and semiconductor switches and diodes. This paper will give an update of the Advanced Power Electronics and Components Technology being developed by the NASA Glenn Research Center for use in future Power Management and Distribution subsystems used in space power systems for spacecraft and lunar and planetary surface power. The initial description and status of this technology program was presented two years ago at the First International Energy Conversion Engineering Conference held at Portsmouth, Virginia, August 2003. The present paper will give a brief background of the previous work reported and a summary of research performed the past several years on soft magnetic materials characterization, dielectric materials and capacitor developments, high quality silicon carbide atomically smooth substrates, and SiC static and dynamic device characterization under elevated temperature conditions. The rationale for and the benefits of developing advanced electrical materials and components for the PMAD subsystem and also for the total power system will also be briefly discussed.

  13. New propulsion components for electric vehicles

    Science.gov (United States)

    Secunde, R. R.

    1983-01-01

    Improved component technology is described. This includes electronically commutated permanent magnet motors of both drum and disk configurations, an unconventional brush commutated motor, ac induction motors, various controllers, transmissions and complete systems. One or more of these approaches to electric vehicle propulsion may eventually displace presently used controllers and brush commutated dc motors. Previously announced in STAR as N83-25982

  14. The Development of an Aza-C-Glycoside Library Based on a Tandem Staudinger/Aza-Wittig/Ugi Three-Component Reaction

    NARCIS (Netherlands)

    Wennekes, T.; Bonger, K.M.; Vogel, K.; Berg, van den S.A.; Strijland, A.; Donker-Koopman, W.E.; Aerts, J.; Marel, van der A.; Overkleeft, H.S.

    2012-01-01

    We report the tandem Staudinger/aza-Wittig/Ugi three-component reaction mediated synthesis of a 64-member compound library of aza-C-glycosides. The library is composed of four pyrrolidine and three piperidine scaffolds, onto which a number of functional groups is grafted to form seven sublibraries.

  15. Probability of inadvertent operation of electrical components in harsh environments

    International Nuclear Information System (INIS)

    Knoll, A.

    1989-01-01

    Harsh environment, which means humidity and high temperature, may and will affect unsealed electrical components by causing leakage ground currents in ungrounded direct current systems. The concern in a nuclear power plant is that such harsh environment conditions could cause inadvertent operation of normally deenergized components, which may have a safety-related isolation function. Harsh environment is a common cause failure, and one way to approach the problem is to assume that all the unsealed electrical components will simultaneously and inadvertently energize as a result of the environmental common cause failure. This assumption is unrealistically conservative. Test results indicated that insulating resistences of any terminal block in harsh environments have a random distribution in the range of 1 to 270 kΩ, with a mean value ∼59 kΩ. The objective of this paper is to evaluate a realistic conditional failure probability for inadvertent operation of electrical components in harsh environments. This value will be used thereafter in probabilistic safety evaluations of harsh environment events and will replace both the overconservative common cause probability of 1 and the random failure probability used for mild environments

  16. Catalog of components for electric and hybrid vehicle propulsion systems

    Science.gov (United States)

    Eissler, H. C.

    1981-01-01

    This catalog of commercially available electric and hybrid vehicle propulsion system components is intended for designers and builders of these vehicles and contains 50 categories of components. These categories include those components used between the battery terminals and the output axle hub, as well as some auxiliary equipment. An index of the components and a listing of the suppliers and their addresses and phone numbers are included.

  17. 76 FR 78693 - Certain Electric Fireplaces, Components Thereof, and Manuals for Same, Processes for...

    Science.gov (United States)

    2011-12-19

    ... INTERNATIONAL TRADE COMMISSION [DN 2865] Certain Electric Fireplaces, Components Thereof, and... Commission has received a complaint entitled In Re Certain Electric Fireplaces, Components Thereof, and... fireplaces, components thereof, and manuals for same, processes for manufacturing or relating to same, and...

  18. Relationships between Association of Research Libraries (ARL) Statistics and Bibliometric Indicators: A Principal Components Analysis

    Science.gov (United States)

    Hendrix, Dean

    2010-01-01

    This study analyzed 2005-2006 Web of Science bibliometric data from institutions belonging to the Association of Research Libraries (ARL) and corresponding ARL statistics to find any associations between indicators from the two data sets. Principal components analysis on 36 variables from 103 universities revealed obvious associations between…

  19. IEEE Conference Publications in Libraries.

    Science.gov (United States)

    Johnson, Karl E.

    1984-01-01

    Conclusions of surveys (63 libraries, OCLC database, University of Rhode Island users) assessing handling of Institute of Electrical and Electronics Engineers (IEEE) conference publications indicate that most libraries fully catalog these publications using LC cataloging, and library patrons frequently require series access to publications. Eight…

  20. Promoting the Effect of the Qing Dynasty Imperial Garden Architectural Component Library on the Digitalization of Cultural Heritage

    Science.gov (United States)

    Jindan, C.; Junsong, Z.; Jiujun, Z.

    2015-08-01

    With the development of computer technology and practical verification, digital virtual technology has matured and is increasingly being widely applied to cultural heritage protection and research. With this advancement in technology, there is pressing need to simplify heritage-related puzzles. Thus the main question that has increasingly become the most central and fundamental problem in heritage digitalization work is how to choose the "proper technology" that provides support directly, accurately and rapidly for the research, protection and exchange of cultural heritage. Based on the principles of "authenticity" and "completeness" found in the Venice Charter in regards to dealing with cultural heritage; this paper proposes the concept of the component library which facilitates the improvement and efficiency of virtual reconstruction, provides a visual discussion platform for cultural heritage protection, virtual scene construction, accuracy assessment, and multi-space-time exhibition; thereby implementing the spirit of tolerance and respect found in the Nara Document on Authenticity. The paper further aims to illustrate the significance of the Qing dynasty imperial garden architectural component library for cultural heritage study and protection, the principles for virtual library construction, use and maintenance of the library, and classification approaches, and also provide some suggestions about making high quality 3D models and effective means for database integration.

  1. Development of probabilistic risk analysis library

    International Nuclear Information System (INIS)

    Soga, Shota; Kirimoto, Yukihiro; Kanda, Kenichi

    2015-01-01

    We developed a library that is designed to perform level 1 Probabilistic Risk Analysis using Binary Decision Diagram (BDD). In particular, our goal is to develop a library that will allow Japanese electric utilities to take the advantages of BDD that can solve Event Tree (ET) and Fault Tree (FT) models analytically. Using BDD, the library supports negation in FT which allows more flexible modeling of ET/FT. The library is written by C++ within an object-oriented framework using open source software. The library itself is a header-only library so that Japanese electric utilities can take advantages of its transparency to speed up development and to build their own software for their specific needs. In this report, the basic capabilities of the library is briefly described. In addition, several applications of the library are demonstrated including validation of MCS evaluation of PRA model and evaluation of corrective and preventive maintenance considering common cause failure. (author)

  2. Electrical Components for Marine Renewable Energy Arrays: A Techno-Economic Review

    Directory of Open Access Journals (Sweden)

    Adam J. Collin

    2017-11-01

    Full Text Available This paper presents a review of the main electrical components that are expected to be present in marine renewable energy arrays. The review is put in context by appraising the current needs of the industry and identifying the key components required in both device and array-scale developments. For each component, electrical, mechanical and cost considerations are discussed; with quantitative data collected during the review made freely available for use by the community via an open access online repository. This data collection updates previous research and addresses gaps specific to emerging offshore technologies, such as marine and floating wind, and provides a comprehensive resource for the techno-economic assessment of offshore energy arrays.

  3. Instrument for analysis of electric motors based on slip-poles component

    Science.gov (United States)

    Haynes, Howard D.; Ayers, Curtis W.; Casada, Donald A.

    1996-01-01

    A new instrument for monitoring the condition and speed of an operating electric motor from a remote location. The slip-poles component is derived from a motor current signal. The magnitude of the slip-poles component provides the basis for a motor condition monitor, while the frequency of the slip-poles component provides the basis for a motor speed monitor. The result is a simple-to-understand motor health monitor in an easy-to-use package. Straightforward indications of motor speed, motor running current, motor condition (e.g., rotor bar condition) and synthesized motor sound (audible indication of motor condition) are provided. With the device, a relatively untrained worker can diagnose electric motors in the field without requiring the presence of a trained engineer or technician.

  4. 76 FR 43345 - In the Matter of: Certain Electric Fireplaces, Components Thereof, Manuals for Same, Certain...

    Science.gov (United States)

    2011-07-20

    ... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-791] In the Matter of: Certain Electric Fireplaces... within the United States after importation of certain electric fireplaces, components thereof, manuals... electric fireplaces, components thereof, manuals for same, certain processes for manufacturing or relating...

  5. Testing Header Component of Electricity Power Industry Boiler

    International Nuclear Information System (INIS)

    Soedardjo, S.A; Andryansyah, B; Artahari, Dewi; Natsir, Muhammad; Triyadi, Ari; Farokhi

    2000-01-01

    Testing of header component of Suralaya Unit II electricity power by replication method has been carried out. That header component is cross over pipe which interconnection between Primary and Superheater Outlet Header Secondary Superheater Outlet Header with the operation time over 14 years. The main composition of cross over pipe is 2 1/4 Cr 1 Mo or frequently specified as ferritique steel. The replication testing shown that the damage classification on those cross over pipe in A class based on failure classification from Neubauer and Wedel. Simple calculation in favor of cross over pipe remaining lifetime is about 16.5 years moreover

  6. Electrical components library for HAWC2

    DEFF Research Database (Denmark)

    Cutululis, Nicolaos Antonio; Larsen, Torben J.; Sørensen, Poul Ejnar

    The work presented in this report is part of the EFP project called “A Simulation Platform to Model, Optimize and Design Wind Turbines” partly funded by the Danish Energy Authority under contract number 1363/04-0008. The project is carried out in cooperation between Risø National Laboratory...

  7. A structured model library for the analysis of electric-vehicle drivetrains; Eine strukturierte Modellbibliothek fuer Analysen an Antriebsstraengen von Elektrofahrzeugen

    Energy Technology Data Exchange (ETDEWEB)

    Niedzwiedz, Simon; Frei, Stephan [Technische Univ. Dortmund (Germany). AG Bordsysteme

    2012-11-01

    This contribution presents a concept for developing structured simulation model libraries. The main objectives are securing a reliable functionality of the contained models among each other and meeting the requirements that a model library has to be flexible and easy to manage on one side, while it has to define a comprehensible and distinct order on the other side. These qualities are especially important in bigger or distributed working groups, for ensuring a long-term and efficient usability. For model reusability and continuous further development a consistent structuring is essential. This concept will be exemplified through a structured model library for the analysis of electric-vehicle drivetrains. (orig.)

  8. Modelling the Load Curve of Aggregate Electricity Consumption Using Principal Components

    OpenAIRE

    Matteo Manera; Angelo Marzullo

    2003-01-01

    Since oil is a non-renewable resource with a high environmental impact, and its most common use is to produce combustibles for electricity, reliable methods for modelling electricity consumption can contribute to a more rational employment of this hydrocarbon fuel. In this paper we apply the Principal Components (PC) method to modelling the load curves of Italy, France and Greece on hourly data of aggregate electricity consumption. The empirical results obtained with the PC approach are compa...

  9. Digital library initiative in an Indian research library: an experience report

    International Nuclear Information System (INIS)

    Venkadesan, S.; Narayanan, A.

    1999-01-01

    Libraries all over the world are transiting from the traditional print only era to the electronic era. The migration to an electronic library involves the understanding of several issues and requirements at the planning stage itself. This paper describes the various aspects of building a digital library system. Experience of implementing certain strategies in the IGCAR library is discussed in detail. The components of the digital library and the various access levels are discussed with examples. Finally, samples of the IGCAR library web site and the Newsletter web site are shown. (author)

  10. News from the Library

    CERN Multimedia

    CERN Library

    2010-01-01

    A third of the world’s current literature in electrical engineering is available on your CERN desktop Looking for a technical standard on software reviews and audits? Is it referred to as "IEEE color books"? Want to download and read NOW the latest version of IEEE 802? Whenever a need for a technical standard or specification arises in your activity, the Library is here to serve you. For IEEE standards it is particularly easy; the whole collection is available for immediate download. Indeed, since 2007, the CERN Library offers readers online access to the complete IEEE Electronic Library (Institute of Electrical and Electronics Engineers). This licence gives unlimited online access to all IEEE and IET journals and proceedings, starting from the first issue. But not everyone knows that this resource gives also access to all current IEEE standards as well as a selection of archival ones. The Library is now working on the integration of a selection of these standards in our onlin...

  11. Calculations of electric dipole moments and static dipole polarizabilities based on the two-component normalized elimination of the small component method

    Science.gov (United States)

    Yoshizawa, Terutaka; Zou, Wenli; Cremer, Dieter

    2016-11-01

    The analytical energy gradient and Hessian of the two-component Normalized Elimination of the Small Component (2c-NESC) method with regard to the components of the electric field are derived and used to calculate spin-orbit coupling (SOC) corrected dipole moments and dipole polarizabilities of molecules, which contain elements with high atomic number. Calculated 2c-NESC dipole moments and isotropic polarizabilities agree well with the corresponding four-component-Dirac Hartree-Fock or density functional theory values. SOC corrections for the electrical properties are in general small, but become relevant for the accurate prediction of these properties when the molecules in question contain sixth and/or seventh period elements (e.g., the SO effect for At2 is about 10% of the 2c-NESC polarizability). The 2c-NESC changes in the electric molecular properties are rationalized in terms of spin-orbit splitting and SOC-induced mixing of frontier orbitals with the same j = l + s quantum numbers.

  12. Calculations of electric dipole moments and static dipole polarizabilities based on the two-component normalized elimination of the small component method.

    Science.gov (United States)

    Yoshizawa, Terutaka; Zou, Wenli; Cremer, Dieter

    2016-11-14

    The analytical energy gradient and Hessian of the two-component Normalized Elimination of the Small Component (2c-NESC) method with regard to the components of the electric field are derived and used to calculate spin-orbit coupling (SOC) corrected dipole moments and dipole polarizabilities of molecules, which contain elements with high atomic number. Calculated 2c-NESC dipole moments and isotropic polarizabilities agree well with the corresponding four-component-Dirac Hartree-Fock or density functional theory values. SOC corrections for the electrical properties are in general small, but become relevant for the accurate prediction of these properties when the molecules in question contain sixth and/or seventh period elements (e.g., the SO effect for At 2 is about 10% of the 2c-NESC polarizability). The 2c-NESC changes in the electric molecular properties are rationalized in terms of spin-orbit splitting and SOC-induced mixing of frontier orbitals with the same j = l + s quantum numbers.

  13. Flight Software Math Library

    Science.gov (United States)

    McComas, David

    2013-01-01

    The flight software (FSW) math library is a collection of reusable math components that provides typical math utilities required by spacecraft flight software. These utilities are intended to increase flight software quality reusability and maintainability by providing a set of consistent, well-documented, and tested math utilities. This library only has dependencies on ANSI C, so it is easily ported. Prior to this library, each mission typically created its own math utilities using ideas/code from previous missions. Part of the reason for this is that math libraries can be written with different strategies in areas like error handling, parameters orders, naming conventions, etc. Changing the utilities for each mission introduces risks and costs. The obvious risks and costs are that the utilities must be coded and revalidated. The hidden risks and costs arise in miscommunication between engineers. These utilities must be understood by both the flight software engineers and other subsystem engineers (primarily guidance navigation and control). The FSW math library is part of a larger goal to produce a library of reusable Guidance Navigation and Control (GN&C) FSW components. A GN&C FSW library cannot be created unless a standardized math basis is created. This library solves the standardization problem by defining a common feature set and establishing policies for the library s design. This allows the libraries to be maintained with the same strategy used in its initial development, which supports a library of reusable GN&C FSW components. The FSW math library is written for an embedded software environment in C. This places restrictions on the language features that can be used by the library. Another advantage of the FSW math library is that it can be used in the FSW as well as other environments like the GN&C analyst s simulators. This helps communication between the teams because they can use the same utilities with the same feature set and syntax.

  14. Phase control of higher spectral components in the presence of a static electric field

    International Nuclear Information System (INIS)

    Zhang Chaojin; Yang Weifeng; Song Xiaohong; Xu Zhizhan

    2009-01-01

    We investigate the higher spectral component generations driven by a few-cycle laser pulse in a dense medium when a static electric field is present. Our results show that, when assisted by a static electric field, the dependence of the transmitted laser spectrum on the carrier-envelope phase (CEP) is significantly increased. Continuum and distinct peaks can be achieved by controlling the CEP of the few-cycle ultrashort laser pulse. Such a strong variation is due to the fact that the presence of the static electric field modifies the waveform of the combined electric field, which further affects the spectral distribution of the generated higher spectral components.

  15. Electric noise component with density f-1 identified on ISEE 3

    International Nuclear Information System (INIS)

    Hoang, S.; Steinberg, J.L.; Couturier, P.; Feldman, W.C.

    1982-01-01

    An electric noise component with an f - 1 spectrum is observed with the SBH radioastronomy receivers on ISEE 3 at frequencies lower than the plasma frequency f/sub p/. On the Z antenna (electrical length for long waves is 7 m) this component is 5--10 times more intense than the predicted thermal noise level. Its spectral density is proportional to f/sub p/ f - 1 (T/sub c/)/sup 1/2/, where T/sub c/ is the core electron temperature and f is the observing frequency. On the S antenna (90 m tip to tip) the new component is much weaker and most probably represents the high-frequency part of a noise spectrum found by Kellogg (1981) with an antenna of the same length. This author interpreted it as mostly due to electron acoustic waves and Doppler shifted ion acoustic waves, but this interpretation has not been confirmed by more accurate calculations (Couturier et al., 1982). Kellogg's spectrum also shows an f - 1 frequency dependence and, if extrapolated assuming the same law as for the Z antenna, approximately fits our S antenna observations. The S antenna f - 1 noise is deeply spin modulated with the minimum electric field in the direction of the solar wind flow as seen in the spacecraft frame of reference. The modulation factor decreases with increasing frequency, becomes negligible when the new component intensity becomes negligible as compared with thermal noise, and increases with the solar wind velocity. The f - 1 component shows some of the properties which are expected from shot noise (direction of minimum intensity) but its spectral index is -1 while shot noise is supposed to show a spectral index -2

  16. Compatibility Between Electric Components in Wind Farms

    DEFF Research Database (Denmark)

    Holdyk, Andrzej; Holbøll, Joachim; Arana Aristi, Iván

    2011-01-01

    The paper describes a method for investigation of the compatibility between electric components in wind farms by identifying critical resonances at different points of an offshore wind farm (OWF), based on systematic variation of critical parameters. In this way, the design of future OWF can...... be improved at a very early stage of the process. It is also revealed what parameters are the most important ones when considering compatibility. It was observed that a change of capacitance in the collection grid shifts the resonance peaks. A change in WT transformer capacitances influences the admittance...

  17. Component sizing optimization of plug-in hybrid electric vehicles

    International Nuclear Information System (INIS)

    Wu, Xiaolan; Cao, Binggang; Li, Xueyan; Xu, Jun; Ren, Xiaolong

    2011-01-01

    Plug-in hybrid electric vehicles (PHEVs) are considered as one of the most promising means to improve the near-term sustainability of the transportation and stationary energy sectors. This paper describes a methodology for the optimization of PHEVs component sizing using parallel chaos optimization algorithm (PCOA). In this approach, the objective function is defined so as to minimize the drivetrain cost. In addition, the driving performance requirements are considered as constraints. Finally, the optimization process is performed over three different all electric range (AER) and two types of batteries. The results from computer simulation show the effectiveness of the approach and the reduction in drivetrian cost while ensuring the vehicle performance.

  18. An analytics of electricity consumption characteristics based on principal component analysis

    Science.gov (United States)

    Feng, Junshu

    2018-02-01

    Abstract . More detailed analysis of the electricity consumption characteristics can make demand side management (DSM) much more targeted. In this paper, an analytics of electricity consumption characteristics based on principal component analysis (PCA) is given, which the PCA method can be used in to extract the main typical characteristics of electricity consumers. Then, electricity consumption characteristics matrix is designed, which can make a comparison of different typical electricity consumption characteristics between different types of consumers, such as industrial consumers, commercial consumers and residents. In our case study, the electricity consumption has been mainly divided into four characteristics: extreme peak using, peak using, peak-shifting using and others. Moreover, it has been found that industrial consumers shift their peak load often, meanwhile commercial and residential consumers have more peak-time consumption. The conclusions can provide decision support of DSM for the government and power providers.

  19. On the importance of the long-term seasonal component in day-ahead electricity price forecasting

    International Nuclear Information System (INIS)

    Nowotarski, Jakub; Weron, Rafał

    2016-01-01

    In day-ahead electricity price forecasting (EPF) the daily and weekly seasonalities are always taken into account, but the long-term seasonal component (LTSC) is believed to add unnecessary complexity to the already parameter-rich models and is generally ignored. Conducting an extensive empirical study involving state-of-the-art time series models we show that (i) decomposing a series of electricity prices into a LTSC and a stochastic component, (ii) modeling them independently and (iii) combining their forecasts can bring – contrary to a common belief – an accuracy gain compared to an approach in which a given time series model is calibrated to the prices themselves. - Highlights: • A new class of Seasonal Component AutoRegressive (SCAR) models is introduced. • Electricity prices are decomposed into a trend-seasonal and a stochastic component. • Both components are modeled independently, their forecasts are combined. • Significant accuracy gains can be achieved compared to commonly used approaches.

  20. High-throughput shadow mask printing of passive electrical components on paper by supersonic cluster beam deposition

    Energy Technology Data Exchange (ETDEWEB)

    Caruso, Francesco; Bellacicca, Andrea; Milani, Paolo, E-mail: pmilani@mi.infn.it [CIMaINa and Dipartimento di Fisica, Università degli Studi di Milano, Via Celoria 16, 20133 Milano (Italy)

    2016-04-18

    We report the rapid prototyping of passive electrical components (resistors and capacitors) on plain paper by an additive and parallel technology consisting of supersonic cluster beam deposition (SCBD) coupled with shadow mask printing. Cluster-assembled films have a growth mechanism substantially different from that of atom-assembled ones providing the possibility of a fine tuning of their electrical conduction properties around the percolative conduction threshold. Exploiting the precise control on cluster beam intensity and shape typical of SCBD, we produced, in a one-step process, batches of resistors with resistance values spanning a range of two orders of magnitude. Parallel plate capacitors with paper as the dielectric medium were also produced with capacitance in the range of tens of picofarads. Compared to standard deposition technologies, SCBD allows for a very efficient use of raw materials and the rapid production of components with different shape and dimensions while controlling independently the electrical characteristics. Discrete electrical components produced by SCBD are very robust against deformation and bending, and they can be easily assembled to build circuits with desired characteristics. The availability of large batches of these components enables the rapid and cheap prototyping and integration of electrical components on paper as building blocks of more complex systems.

  1. Component sizing optimization of plug-in hybrid electric vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Xiaolan; Cao, Binggang; Li, Xueyan; Xu, Jun; Ren, Xiaolong [School of Mechanical Engineering, Xi' an Jiaotong University, Xi' an, 710049 (China)

    2011-03-15

    Plug-in hybrid electric vehicles (PHEVs) are considered as one of the most promising means to improve the near-term sustainability of the transportation and stationary energy sectors. This paper describes a methodology for the optimization of PHEVs component sizing using parallel chaos optimization algorithm (PCOA). In this approach, the objective function is defined so as to minimize the drivetrain cost. In addition, the driving performance requirements are considered as constraints. Finally, the optimization process is performed over three different all electric range (AER) and two types of batteries. The results from computer simulation show the effectiveness of the approach and the reduction in drivetrian cost while ensuring the vehicle performance. (author)

  2. Operating Experience of Digital, Software-based Components Used in I and C and Electrical Systems in German NPPs

    International Nuclear Information System (INIS)

    Blum, Stefanie; Lochthofen, Andre; Quester, Claudia; Arians, Robert

    2015-01-01

    In recent years, many components in instrumentation and control (I and C) and electrical systems of nuclear power plants (NPPs) were replaced by digital, software-based components. Due to the more complex structure, software-based I and C and electrical components show the potential for new failure mechanisms and an increasing number of failure possibilities, including the potential for common cause failures. An evaluation of the operating experience of digital, software-based components may help to determine new failure modes of these components. In this paper, we give an overview over the results of the evaluation of the operating experience of digital, software-based components used in I and C and electrical systems in NPPs in Germany. (authors)

  3. Nuclear plant aging research - an overview (electrical and mechanical components)

    International Nuclear Information System (INIS)

    Vora, J.P.

    1985-01-01

    As the operating nuclear power plants advance in age there must be a conscious national and international effort to understand the influence and safety implications of aging and service wear of components and structures in nuclear power plants and develop measures which are practical and cost effective for timely mitigation of aging degradation that could significantly affect plant safety. The Office of Nuclear Regulatory Research has, therefore, initiated a multi-year, multi-disciplinary program on Nuclear Plant Aging Research (NPAR). The overall goals identified for the program are as follows: 1) to identify and characterize aging and service wear effects associated with electrical and mechanical components, interfaces, and systems whose failure could impair plant safety; 2) to identify and recommend methods of inspection, surveillance and condition monitoring of electrical and mechanical components and systems which will be effective in detecting significant aging effects prior to loss of safety function so that timely maintenance and repair or replacement can be implemented; and, 3) to identify and recommend acceptable maintenance practices which can be undertaken to mitigate the effects of aging and to diminish the rate and extent of degradation caused by aging and service wear. The specific research activities to be implemented to achieve these goals are described

  4. Hybrid and electric advanced vehicle systems (heavy) simulation

    Science.gov (United States)

    Hammond, R. A.; Mcgehee, R. K.

    1981-01-01

    A computer program to simulate hybrid and electric advanced vehicle systems (HEAVY) is described. It is intended for use early in the design process: concept evaluation, alternative comparison, preliminary design, control and management strategy development, component sizing, and sensitivity studies. It allows the designer to quickly, conveniently, and economically predict the performance of a proposed drive train. The user defines the system to be simulated using a library of predefined component models that may be connected to represent a wide variety of propulsion systems. The development of three models are discussed as examples.

  5. Magnetic field compatibility of components for ITER electrical distribution systems

    International Nuclear Information System (INIS)

    Hourtoule, J.; Van Houtte, D.; Hertout, P.; Fejoz, P.

    2004-01-01

    The electrical distribution boards and control cubicles, installed inside the ITER Tokamak building, can be subject to a constant or slowly variable magnetic field up to 70 mT, 10 mT/s induced by ITER coils. This is a very unusual environmental condition and there are almost no data available on static magnetic field compatibility for the standard industrial electrical and electronic components that might be used inside standard low voltage distribution boards and standard control boards. CEA has especially taken in charge the test of electronic, control and signal conditioning units. For this purpose a test bed composed of a solenoid and a 30 V, 800 A power supply, has been developed at CEA Cadarache. Its characteristics are the following: - Magnetic field capability: 40 mT; - Variation of field: up to 10 mT/s. Useful dimensions for equipment under test: 500 x 500 x 500 mm. The list of the components to be tested has been identified trying to find common and recent components of different manufacturers. Test procedures have been written following the most relevant IEC standards and manufacturing recommendations and procedures. Magnetic compatibility tests on the basic components of standard low voltage control boards has been performed. All components tested are more or less sensitive to magnetic fields and the effect varies from the simple perturbation of the output signals to the partial destruction of some electronic card. The most sensitive are the ferromagnetic components like small power supplies transformers, relays, on inductors. For power supplies the most important consequence is the increase of the consumption (primary current). For most of the conditioning units the operational limits were found in the range of 30 mT (destruction of materials and overload of the supply) For PLC (Programme Logic Control) central units tested, the limit is in the order of 40 mT (components permanently out of service) Relays are limited to 15 mT (outputs oscillations, no

  6. Electric vehicle recycling 2020: Key component power electronics.

    Science.gov (United States)

    Bulach, Winfried; Schüler, Doris; Sellin, Guido; Elwert, Tobias; Schmid, Dieter; Goldmann, Daniel; Buchert, Matthias; Kammer, Ulrich

    2018-04-01

    Electromobility will play a key role in order to reach the specified ambitious greenhouse gas reduction targets in the German transport sector of 42% between 1990 and 2030. Subsequently, a significant rise in the sale of electric vehicles (EVs) is to be anticipated in future. The amount of EVs to be recycled will rise correspondingly after a delay. This includes the recyclable power electronics modules which are incorporated in every EV as an important component for energy management. Current recycling methods using car shredders and subsequent post shredder technologies show high recycling rates for the bulk metals but are still associated with high losses of precious and strategic metals such as gold, silver, platinum, palladium and tantalum. For this reason, the project 'Electric vehicle recycling 2020 - key component power electronics' developed an optimised recycling route for recycling power electronics modules from EVs which is also practicable in series production and can be implemented using standardised technology. This 'WEEE recycling route' involves the disassembly of the power electronics from the vehicle and a subsequent recycling in an electronic end-of-life equipment recycling plant. The developed recycling process is economical under the current conditions and raw material prices, even though it involves considerably higher costs than recycling using the car shredder. The life cycle assessment shows basically good results, both for the traditional car shredder route and the developed WEEE recycling route: the latter provides additional benefits from some higher recovery rates and corresponding credits.

  7. Characterizing and Modeling the Cost of Rework in a Library of Reusable Software Components

    Science.gov (United States)

    Basili, Victor R.; Condon, Steven E.; ElEmam, Khaled; Hendrick, Robert B.; Melo, Walcelio

    1997-01-01

    In this paper we characterize and model the cost of rework in a Component Factory (CF) organization. A CF is responsible for developing and packaging reusable software components. Data was collected on corrective maintenance activities for the Generalized Support Software reuse asset library located at the Flight Dynamics Division of NASA's GSFC. We then constructed a predictive model of the cost of rework using the C4.5 system for generating a logical classification model. The predictor variables for the model are measures of internal software product attributes. The model demonstrates good prediction accuracy, and can be used by managers to allocate resources for corrective maintenance activities. Furthermore, we used the model to generate proscriptive coding guidelines to improve programming, practices so that the cost of rework can be reduced in the future. The general approach we have used is applicable to other environments.

  8. INDIA’S ELECTRICITY DEMAND FORECAST USING REGRESSION ANALYSIS AND ARTIFICIAL NEURAL NETWORKS BASED ON PRINCIPAL COMPONENTS

    Directory of Open Access Journals (Sweden)

    S. Saravanan

    2012-07-01

    Full Text Available Power System planning starts with Electric load (demand forecasting. Accurate electricity load forecasting is one of the most important challenges in managing supply and demand of the electricity, since the electricity demand is volatile in nature; it cannot be stored and has to be consumed instantly. The aim of this study deals with electricity consumption in India, to forecast future projection of demand for a period of 19 years from 2012 to 2030. The eleven input variables used are Amount of CO2 emission, Population, Per capita GDP, Per capita gross national income, Gross Domestic savings, Industry, Consumer price index, Wholesale price index, Imports, Exports and Per capita power consumption. A new methodology based on Artificial Neural Networks (ANNs using principal components is also used. Data of 29 years used for training and data of 10 years used for testing the ANNs. Comparison made with multiple linear regression (based on original data and the principal components and ANNs with original data as input variables. The results show that the use of ANNs with principal components (PC is more effective.

  9. Pay for load demand - electricity pricing with load demand component

    International Nuclear Information System (INIS)

    Pyrko, Jurek; Sernhed, Kerstin; Abaravicius, Juozas

    2003-01-01

    This publication is part of a project called Direct and Indirect Load Control in Buildings. Peak load problems have attracted considerable attention in Sweden during last three winters, caused by a significant decrease in available reserve power, which is a consequence of political decisions and liberalisation of the electricity market. A possible way to lower peak loads, avoiding electricity shortages and reducing electricity costs both for users and utilities, is to make customers experience the price difference during peak load periods and, in this way, become more aware of their energy consumption pattern and load demand. As of January 1st 2001, one of the Swedish energy utilities - Sollentuna Energi - operating in the Stockholm area, introduced a new electricity tariff with differentiated grid fees based on a mean value of the peak load every month. This tariff was introduced for all residential customers in the service area. The objective of this study is to investigate the extent to which a Load Demand Component, included in electricity pricing, can influence energy use and load demand in residential buildings. What are the benefits and disadvantages for customers and utilities? This paper investigates the impact of the new tariff on the utility and different types of typical residential customers, making comparisons with previous tariff. Keywords Load demand, electricity pricing, tariff, residential customers, energy behaviour

  10. The qualification of electrical components and instrumentations relevant to safety

    CERN Document Server

    Zambardi, F

    1989-01-01

    Systems and components relevant to safety of nuclear power plants must maintain their functional integrity in order to assure accident prevention and mitigation. Redundancy is utilized against random failures, nevertheless care must be taken to avoid common failures in redundant components. Main sources of degradation and common cause failures consist in the aging effects and in the changes of environmental conditions which occur during the plant life and the postulated accidents. These causes of degradation are expected to be especially significant for instrumentation and electrical equipment, which can have a primary role in safety systems. The qualification is the methodology by which component safety requirements can be met against the above mentioned causes of degradation. In this report the connection between the possible, plant conditions and the resulting degradation effects on components is preliminarily addressed. A general characterization of the qualification is then presented. Basis, methods and ...

  11. Beamline standard component designs for the Advanced Photon Source

    International Nuclear Information System (INIS)

    Shu, D.; Barraza, J.; Brite, C.; Chang, J.; Sanchez, T.; Tcheskidov, V.; Kuzay, T.M.

    1994-01-01

    The Advanced Photon Source (APS) has initiated a design standardization and modularization activity for the APS synchrotron radiation beamline components. These standard components are included in components library, sub-components library and experimental station library. This paper briefly describes these standard components using both technical specifications and side view drawings

  12. Electric-field triggered controlled release of bioactive volatiles from imine-based liquid crystalline phases.

    Science.gov (United States)

    Herrmann, Andreas; Giuseppone, Nicolas; Lehn, Jean-Marie

    2009-01-01

    Application of an electric field to liquid crystalline film forming imines with negative dielectric anisotropy, such as N-(4-methoxybenzylidene)-4-butylaniline (MBBA, 1), results in the expulsion of compounds that do not participate in the formation of the liquid crystalline phase. Furthermore, amines and aromatic aldehydes undergo component exchange with the imine by generating constitutional dynamic libraries. The strength of the electric field and the duration of its application to the liquid crystalline film influence the release rate of the expelled compounds and, at the same time, modulate the equilibration of the dynamic libraries. The controlled release of volatile organic molecules with different chemical functionalities from the film was quantified by dynamic headspace analysis. In all cases, higher headspace concentrations were detected in the presence of an electric field. These results point to the possibility of using imine-based liquid crystalline films to build devices for the controlled release of a broad variety of bioactive volatiles as a direct response to an external electric signal.

  13. Supervision of electrical and instrumentation systems and components at nuclear facilities

    International Nuclear Information System (INIS)

    1986-01-01

    The general guidelines for the supervision of nuclear facilities carried out by the Finnish Centre for Radiation and Nuclear Safety (STUK) are set forth in the guide YVL 1.1. This guide shows in more detail how STUK supervises the electrical and instrumentation systems and components of nuclear facilities

  14. Libraries and the semantic web an introduction to its applications and opportunities for libraries

    CERN Document Server

    DeWeese, Keith P

    2014-01-01

    This book covers the concept of the Semantic Web-what it is, the components that comprise it, including Linked Data, and the various ways that libraries are engaged in contributing to its development in making library resources and services ever more accessible to end-users.

  15. Public library consumer health information pilot project: results of a National Library of Medicine evaluation.

    Science.gov (United States)

    Wood, F B; Lyon, B; Schell, M B; Kitendaugh, P; Cid, V H; Siegel, E R

    2000-10-01

    In October 1998, the National Library of Medicine (NLM) launched a pilot project to learn about the role of public libraries in providing health information to the public and to generate information that would assist NLM and the National Network of Libraries of Medicine (NN/LM) in learning how best to work with public libraries in the future. Three regional medical libraries (RMLs), eight resource libraries, and forty-one public libraries or library systems from nine states and the District of Columbia were selected for participation. The pilot project included an evaluation component that was carried out in parallel with project implementation. The evaluation ran through September 1999. The results of the evaluation indicated that participating public librarians were enthusiastic about the training and information materials provided as part of the project and that many public libraries used the materials and conducted their own outreach to local communities and groups. Most libraries applied the modest funds to purchase additional Internet-accessible computers and/or upgrade their health-reference materials. However, few of the participating public libraries had health information centers (although health information was perceived as a top-ten or top-five topic of interest to patrons). Also, the project generated only minimal usage of NLM's consumer health database, known as MEDLINEplus, from the premises of the monitored libraries (patron usage from home or office locations was not tracked). The evaluation results suggested a balanced follow-up by NLM and the NN/LM, with a few carefully selected national activities, complemented by a package of targeted activities that, as of January 2000, are being planned, developed, or implemented. The results also highlighted the importance of building an evaluation component into projects like this one from the outset, to assure that objectives were met and that evaluative information was available on a timely basis, as was

  16. Profesional medical library education in the United States in relation to the qualifications of medical library manpower in Ohio.

    Science.gov (United States)

    Rees, A M; Rothenberg, L; Denison, B

    1968-10-01

    THE PRESENT SYSTEM OF EDUCATION FOR MEDICAL LIBRARY PRACTICE IN THE UNITED STATES CONSISTS OF FOUR MAJOR COMPONENTS: graduate degree programs in library science with specialization in medical librarianship; graduate degree programs in library science with no such specialization; postgraduate internships in medical libraries; continuing education programs. Data are presented illustrating the flow of graduates along these several educational pathways into medical library practice.The relevance of these educational components to the current medical library work force is discussed with reference to manpower data compiled for Ohio. The total number of medical library personnel in Ohio in 1968 is 316. Of this total, only forty-two (approximately 14 percent) have received any formal library training. Seventy persons have only a high school education. From these figures, it is concluded that there is no standard or essential qualification which is universally accepted as educational preparation for work in medical libraries; that the comparative sophistication of the educational programs in medical librarianship has yet to be reflected widely in general medical library practice; that an increasingly large number of non-professional or ancillary personnel are being, and will continue to be, utilized in medical libraries; that large numbers of untrained persons have sole responsibility for medical libraries; and that appropriate educational programs will have to be designed specifically for this type of personnel.

  17. Electrostatic Discharge (ESD and Electrical Overstress (EOS: The state of the art in components to systems

    Directory of Open Access Journals (Sweden)

    Steven H. Voldman

    2017-06-01

    Full Text Available Electrostatic Discharge (ESD, Electrical Overstress (EOS and electromagnetic compatibility (EMC continue to impact semiconductor manufacturing, semiconductor components and systems as technologies scale from micro- to nano-electronics. The range of concern for components include semiconductor components, magnetic recording industry, MEMs, and for products from disk drives, cell phones, notebooks, tablets, laptops, and desktop computers. The objective of this lecture is to address the state of the art of electrostatic discharge (ESD and electrical overstress (EOS in today’s electronic components and systems. The tutorial provides a clear picture of ESD, EOS and EMC phenomena, sources, physics, failure mechanisms, testing and qualification of components and systems. The conclusion of this talk is that ESD and EOS continue to be a concern in technologies from micro-electronics to nano-structures, and will remain a reliability and quality issue in the future.

  18. Architecture, Voltage, and Components for a Turboelectric Distributed Propulsion Electric Grid

    Science.gov (United States)

    Armstrong, Michael J.; Blackwelder, Mark; Bollman, Andrew; Ross, Christine; Campbell, Angela; Jones, Catherine; Norman, Patrick

    2015-01-01

    The development of a wholly superconducting turboelectric distributed propulsion system presents unique opportunities for the aerospace industry. However, this transition from normally conducting systems to superconducting systems significantly increases the equipment complexity necessary to manage the electrical power systems. Due to the low technology readiness level (TRL) nature of all components and systems, current Turboelectric Distributed Propulsion (TeDP) technology developments are driven by an ambiguous set of system-level electrical integration standards for an airborne microgrid system (Figure 1). While multiple decades' worth of advancements are still required for concept realization, current system-level studies are necessary to focus the technology development, target specific technological shortcomings, and enable accurate prediction of concept feasibility and viability. An understanding of the performance sensitivity to operating voltages and an early definition of advantageous voltage regulation standards for unconventional airborne microgrids will allow for more accurate targeting of technology development. Propulsive power-rated microgrid systems necessitate the introduction of new aircraft distribution system voltage standards. All protection, distribution, control, power conversion, generation, and cryocooling equipment are affected by voltage regulation standards. Information on the desired operating voltage and voltage regulation is required to determine nominal and maximum currents for sizing distribution and fault isolation equipment, developing machine topologies and machine controls, and the physical attributes of all component shielding and insulation. Voltage impacts many components and system performance.

  19. The DC field components of horizontal and vertical electric dipole sources immersed in three-layered stratified media

    Directory of Open Access Journals (Sweden)

    D. Llanwyn Jones

    1997-04-01

    Full Text Available Formulas for computing the Cartesian components of the static (DC fields of horizontal electric dipoles ( HEDs and vertical electric dipoles ( VEDs located in the central zone of a three-layer horizontally stratified medium are derived and presented in a summary form suitable for immediate computation. Formulas are given for the electric and magnetic field components in the upper and central regions. In the general case the computation involves the summation of a convergent infinite series. For the particular case of an infinitely thick central region (corresponding to the two-layer problem, the analysis produces relatively simple closed-form equations for the field components which are suitable for a 'hand calculation'. Specimen calculations for dipoles in seawaters are included and the derived results are compared with computations made using an ac model.

  20. Reinventing a health sciences digital library--organizational impact.

    Science.gov (United States)

    Moore, Margaret E; Garrison, Scott; Hayes, Barrie; McLendon, Wallace

    2003-01-01

    What is the organizational impact of becoming a digital library, as well as a physical entity with facilities and collections? Is the digital library an add-on or an integrated component of the overall library package? Librarians see sweeping environmental and technological changes. The staff members feel exhilarated and challenged by the pressures to adapt quickly and effectively. Librarians recognize that a Web presence, like other technology components, must be continuously enhanced and regularly re-engineered. The Health Sciences Library, University of North Carolina at Chapel Hill, is reinventing its digital presence to better meet the needs of the community. This paper provides a case study focusing on major changes in planning processes, organizational structure, staffing, budgeting, training, communications, and operations at the Health Sciences Library.

  1. The DC field components of horizontal and vertical electric dipole sources immersed in three-layered stratified media

    Directory of Open Access Journals (Sweden)

    D. Llanwyn Jones

    Full Text Available Formulas for computing the Cartesian components of the static (DC fields of horizontal electric dipoles ( HEDs and vertical electric dipoles ( VEDs located in the central zone of a three-layer horizontally stratified medium are derived and presented in a summary form suitable for immediate computation. Formulas are given for the electric and magnetic field components in the upper and central regions. In the general case the computation involves the summation of a convergent infinite series. For the particular case of an infinitely thick central region (corresponding to the two-layer problem, the analysis produces relatively simple closed-form equations for the field components which are suitable for a 'hand calculation'. Specimen calculations for dipoles in seawaters are included and the derived results are compared with computations made using an ac model.

  2. Adaptable component frameworks

    DEFF Research Database (Denmark)

    Katajainen, Jyrki; Simonsen, Bo

    2009-01-01

    The CPH STL is a special edition of the STL, the containers and algorithms part of the C++ standard library. The specification of the generic components of the STL is given in the C++ standard. Any implementation of the STL, e.g. the one that ships with your standard-compliant C++ compiler, should...... for vector, which is undoubtedly the most used container of the C++ standard library. In particular, we specify the details of a vector implementation that is safe with respect to referential integrity and strong exception safety. Additionally, we report the experiences and lessons learnt from...... the development of component frameworks which we hope to be of benefit to persons engaged in the design and implementation of generic software libraries....

  3. A method to incorporate interstitial components into the TPS gynecologic rigid applicator library

    Directory of Open Access Journals (Sweden)

    Antonio Otal

    2017-01-01

    Full Text Available Purpose: T2 magnetic resonance imaging (MRI is recommended as the imaging modality for image-guided brachytherapy. In locally advanced cervical carcinoma, combined endocavitary and interstitial applicators are appropriate (Vienna or Utrecht. To cover extensive disease, Template Benidorm (TB was developed. Treatment planning system applicator libraries are currently unavailable for the Utrecht applicator or the TB. The purpose of this work is to develop an applicator library for both applicators. Material and methods: The library developed in this work has been used in the Oncentra Brachytherapy TPS, version 4.3.0, which has a brachytherapy module that includes a library of rigid applicators. To add the needles of the Utrecht applicator and to model the TB, we used FreeCAD and MeshLab. The reconstruction process was based on the points that the rigid section and the interstitial part have in common. This, together with the free length, allowed us to ascertain the position of the tip. Results: In case of the Utrecht applicator, one of the sources of uncertainty in the reconstruction was determining the distance of the tip of needle from the ovoid. In case of the TB, the large number of needles involved made their identification time consuming. The developed library resolved both issues. Conclusions : The developed library for the Utrecht and TB is feasible and efficient improving accuracy. It allows all the required treatment planning to proceed using just a T2 MRI sequence. The additional use of specific free available software applications makes it possible to add this information to the already existing library of the Oncentra Brachytherapy TPS. Specific details not included on this manuscript will be available under request. This library is also currently being implemented also into the Sagiplan v 2.0 TPS.

  4. The qualification of electrical components and instrumentations relevant to safety

    International Nuclear Information System (INIS)

    Zambardi, F.

    1989-03-01

    Systems and components relevant to safety of nuclear power plants must maintain their functional integrity in order to assure accident prevention and mitigation. Redundancy is utilized against random failures, nevertheless care must be taken to avoid common failures in redundant components. Main sources of degradation and common cause failures consist in the aging effects and in the changes of environmental conditions which occur during the plant life and the postulated accidents. These causes of degradation are expected to be especially significant for instrumentation and electrical equipment, which can have a primary role in safety systems. The qualification is the methodology by which component safety requirements can be met against the above mentioned causes of degradation. In this report the connection between the possible, plant conditions and the resulting degradation effects on components is preliminarily addressed. A general characterization of the qualification is then presented. Basis, methods and peculiar aspects are discussed and the qualification by testing is taken into special account. Technical and organizational aspects related to a plant qualification program are also focused. The report ends with a look to the most significant research and development activities. (author)

  5. A Comprehensive Study of Key Electric Vehicle (EV) Components, Technologies, Challenges, Impacts, and Future Direction of Development

    OpenAIRE

    Fuad Un-Noor; Sanjeevikumar Padmanaban; Lucian Mihet-Popa; Mohammad Nurunnabi Mollah; Eklas Hossain

    2017-01-01

    Electric vehicles (EV), including Battery Electric Vehicle (BEV), Hybrid Electric Vehicle (HEV), Plug-in Hybrid Electric Vehicle (PHEV), Fuel Cell Electric Vehicle (FCEV), are becoming more commonplace in the transportation sector in recent times. As the present trend suggests, this mode of transport is likely to replace internal combustion engine (ICE) vehicles in the near future. Each of the main EV components has a number of technologies that are currently in use or can become prominent in...

  6. Development of a large peptoid-DOTA combinatorial library.

    Science.gov (United States)

    Singh, Jaspal; Lopes, Daniel; Gomika Udugamasooriya, D

    2016-09-01

    Conventional one-bead one-compound (OBOC) library synthesis is typically used to identify molecules with therapeutic value. The design and synthesis of OBOC libraries that contain molecules with imaging or even potentially therapeutic and diagnostic capacities (e.g. theranostic agents) has been overlooked. The development of a therapeutically active molecule with a built-in imaging component for a certain target is a daunting task, and structure-based rational design might not be the best approach. We hypothesize to develop a combinatorial library with potentially therapeutic and imaging components fused together in each molecule. Such molecules in the library can be used to screen, identify, and validate as direct theranostic candidates against targets of interest. As the first step in achieving that aim, we developed an on-bead library of 153,600 Peptoid-DOTA compounds in which the peptoids are the target-recognizing and potentially therapeutic components and the DOTA is the imaging component. We attached the DOTA scaffold to TentaGel beads using one of the four arms of DOTA, and we built a diversified 6-mer peptoid library on the remaining three arms. We evaluated both the synthesis and the mass spectrometric sequencing capacities of the test compounds and of the final library. The compounds displayed unique ionization patterns including direct breakages of the DOTA scaffold into two units, allowing clear decoding of the sequences. Our approach provides a facile synthesis method for the complete on-bead development of large peptidomimetic-DOTA libraries for screening against biological targets for the identification of potential theranostic agents in the future. © 2016 The Authors. Biopolymers Published by Wiley Periodicals, Inc. Biopolymers (Pept Sci) 106: 673-684, 2016. © 2016 The Authors. Biopolymers Published by Wiley Periodicals, Inc.

  7. Diagnosis of the Main Busbar II Panel Components Ageing of RSG-GAS Electrical System by Using Infrared Thermography

    International Nuclear Information System (INIS)

    Teguh Sulistyo; Kiswanto; Roziq Himawan; Ari Satmoko

    2007-01-01

    To support the operation of RSG-GAS safely, the diagnosis of the ageing of main busbar II BHD/BHE/BHF panel components of RSG-GAS electrical system have been done. By using infrared thermography type Thermo Tracer TH9100PM VI/PW VI. The results of the diagnosis showed that some of the components under degradation with various rate. It can cause the system failure. By understanding the components ageing degradation mechanism and performing the preventive and predictive maintenance and safety of RSG-GAS electrical system earlier, the possibility of accident can be avoided. (author)

  8. Imaging axial and radial electric field components in dielectric targets under plasma exposure

    NARCIS (Netherlands)

    Slikboer, E.T.; Sobota, A.; Guaitella, O.; Garcia-Caurel, E.

    2018-01-01

    This work presents new ways to investigate the individual electric field components in a dielectric target induced by a non thermal atmospheric pressure plasma jet. Mueller polarimetry is applied to investigate electro-optic crystals under exposure of guided ionization waves produced by a plasma

  9. On the development of radiation tolerant surveillance camera from consumer-grade components

    Directory of Open Access Journals (Sweden)

    Klemen Ambrožič

    2017-01-01

    Full Text Available In this paper an overview on the process of designing a radiation tolerant surveillance camera from consumer grade components and commercially available particle shielding materials is given. This involves utilization of Monte-Carlo particle transport code MCNP6 and ENDF/B-VII.0 nuclear data libraries, as well as testing the physical electrical systems against γ radiation, utilizing JSI TRIGA mk. II fuel elements as a γ-ray sources. A new, aluminum, 20 cm × 20 cm × 30 cm irradiation facility with electrical power and signal wire guide-tube to the reactor platform, was designed and constructed and used for irradiation of large electronic and optical components assemblies with activated fuel elements. Electronic components to be used in the camera were tested against γ-radiation in an independent manner, to determine their radiation tolerance. Several camera designs were proposed and simulated using MCNP, to determine incident particle and dose attenuation factors. Data obtained from the measurements and MCNP simulations will be used to finalize the design of 3 surveillance camera models, with different radiation tolerances.

  10. On the development of radiation tolerant surveillance camera from consumer-grade components

    Science.gov (United States)

    Klemen, Ambrožič; Luka, Snoj; Lars, Öhlin; Jan, Gunnarsson; Niklas, Barringer

    2017-09-01

    In this paper an overview on the process of designing a radiation tolerant surveillance camera from consumer grade components and commercially available particle shielding materials is given. This involves utilization of Monte-Carlo particle transport code MCNP6 and ENDF/B-VII.0 nuclear data libraries, as well as testing the physical electrical systems against γ radiation, utilizing JSI TRIGA mk. II fuel elements as a γ-ray sources. A new, aluminum, 20 cm × 20 cm × 30 cm irradiation facility with electrical power and signal wire guide-tube to the reactor platform, was designed and constructed and used for irradiation of large electronic and optical components assemblies with activated fuel elements. Electronic components to be used in the camera were tested against γ-radiation in an independent manner, to determine their radiation tolerance. Several camera designs were proposed and simulated using MCNP, to determine incident particle and dose attenuation factors. Data obtained from the measurements and MCNP simulations will be used to finalize the design of 3 surveillance camera models, with different radiation tolerances.

  11. Graduate Student Needs in Relation to Library Research Skills

    Science.gov (United States)

    Young, Shawna; Jacobs, Warren

    2013-01-01

    Traditionally, graduate study includes a research component, requiring library skills to locate relevant literature. Upon matriculation into graduate programs, many students are underprepared in library research skills, making library instruction a priority for the success of graduate students. This qualitative study, utilizing emergent design,…

  12. Single-wheel drive with new electric components. Einzelradantrieb mit neuen E-Komponenten

    Energy Technology Data Exchange (ETDEWEB)

    Westendorf, H. (Fichtel und Sachs AG, Schweinfurt (Germany)); Schiebold, S. (Fichtel und Sachs AG, Schweinfurt (Germany)); Ehrhart, P. (Fichtel und Sachs AG, Schweinfurt (Germany)); Lindner, L. (Fichtel und Sachs AG, Schweinfurt (Germany))

    1991-01-01

    Fundamentally important developments and innovations in the fields of magnetic materials, plastics technology and electronics, together with new control concepts, make a new drive concept possible for passenger cars produced in series. The concept, which makes use of a combustion engine and an all-electric power transmission with a single-wheel drive, is presented, together with its components. (orig./HW)

  13. Networking Activities at the Library of Congress.

    Science.gov (United States)

    Maruyama, Lenore S.; Avram, Henriette D.

    1979-01-01

    Examines the background studies and high-priority projects which will lay the groundwork for the library bibliographic component of a National Library and Information Service Network and reviews the progress and problems of the national network as evidenced by current cooperative projects. (CWM)

  14. Access to IEEE Electronic Library

    CERN Multimedia

    2007-01-01

    From 2007, the CERN Library now offers readers online access to the complete IEEE Electronic Library (Institute of Electrical and Electronics Engineers). This new licence gives unlimited online access to all IEEE and IET (previously IEE) journals and proceedings as well as all current IEEE standards and selected archived ones. Some of the titles offer volumes back to 1913. This service currently represents more than 1,400,000 full-text articles! This leading engineering information resource replaces the previous service, a sub-product of the IEEE database called 'IEEE Enterprise', which offered online access to the complete collection of IEEE journals and proceedings, but with limited features. The service had become so popular that the CERN Working Group for Acquisitions recommended that the Library subscribe to the complete IEEE Electronic Library for 2007. Usage statistics for recent months showed there was a demand for the service from a large community of CERN users and we were aware that many users h...

  15. Development of commercial hybrid electric vehicle with native key components

    Directory of Open Access Journals (Sweden)

    S. V. Bakhmutov

    2014-01-01

    Full Text Available The perspectives of development of medium weight cargo vehicles with hybrid powertrain including Russian native key components are considered in this article. Series-parallel scheme of HEV is more relevant owing to limitations of series and parallel schemes. An example of this technology is described. This technical solution has good facilities for variation of HEV and AWD type. The authors have patented it. In addition, another main issue is to choose the types of key components with good correlation for parameters of ICE, electric motors, batteries, and inverter. Using mathematical model of the vehicle a selection and correlation of technical characteristics were carried out to meet ecological and economical requirements. After computing calculation two control strategies were accepted. The first strategy contributes to good fuel consumption, while the other one is aimed at ecology. Researchers use test benches to confirm the results of calculation, and this one was built by the authors applying native components. The result of experiment on the test bench is the growth of fuel consumption of the medium weight cargo vehicle by 25% and compliance with ecological class Euro-4.

  16. The Vendors' Corner: Biblio-Techniques' Library and Information System (BLIS).

    Science.gov (United States)

    Library Software Review, 1984

    1984-01-01

    Describes online catalog and integrated library computer system designed to enhance Washington Library Network's software. Highlights include system components; implementation options; system features (integrated library functions, database design, system management facilities); support services (installation and training, software maintenance and…

  17. Research Libraries and the internet

    DEFF Research Database (Denmark)

    Finnemann, Niels Ole

    2014-01-01

    The paper argues that digital media have a disruptive potential, but path dependency is often a modifying component in the historical development. This is demonstrated in different stages of the development of the interrelationship between digitization, digital media and research libraries. Today...... the historical dynamic has reached a point where all institutions concerned with knowledge handling will have to redefine themselves. Research libraries are gradually incorporated into a number of new “research infrastructures” which are being built around different kinds of data materials, and each research...... library may specialize according to some sort of coordinated criteria....

  18. Library Space: Assessment and Planning through a Space Utilization Study.

    Science.gov (United States)

    Prentice, Katherine A; Argyropoulos, Erica K

    2018-01-01

    The objective of this article is to describe the recent space and furniture utilization study conducted through direct observation at the small, academic-centered Schusterman Library. Student workers from the library's reference desk monitored two semesters of use and went on to observe a third semester after electrical power upgrades were installed. Extensive use details were collected about where library patrons sat during which parts of the day, and certain areas of the library were ultimately identified as much more active than others. Overall, the information gathered proved useful to library planning and will be valuable to future space initiatives. This article further demonstrates feasible means for any library to implement a similar study with minimal resources.

  19. Generating optimized stochastic power management strategies for electric car components

    Energy Technology Data Exchange (ETDEWEB)

    Fruth, Matthias [TraceTronic GmbH, Dresden (Germany); Bastian, Steve [Technische Univ. Dresden (Germany)

    2012-11-01

    With the increasing prevalence of electric vehicles, reducing the power consumption of car components becomes a necessity. For the example of a novel traffic-light assistance system, which makes speed recommendations based on the expected length of red-light phases, power-management strategies are used to control under which conditions radio communication, positioning systems and other components are switched to low-power (e.g. sleep) or high-power (e.g. idle/busy) states. We apply dynamic power management, an optimization technique well-known from other domains, in order to compute energy-optimal power-management strategies, sometimes resulting in these strategies being stochastic. On the example of the traffic-light assistant, we present a MATLAB/Simulink-implemented framework for the generation, simulation and formal analysis of optimized power-management strategies, which is based on this technique. We study capabilities and limitations of this approach and sketch further applications in the automotive domain. (orig.)

  20. Evaluation of material integrity on electricity generator water steam cycles component (Main Steam Pipe)

    International Nuclear Information System (INIS)

    Sudardjo; Histori; Triyadi, Ari

    1998-01-01

    The evaluation of material integrity on electricity generator component has been done. That component was main steam pipe of Unit II Suralaya Coal Fired Power Plant. evaluation was done by replication technique. The damage was found are two porosity's, from two point samples of six points sample population. Based on cavity evaluation in steels, which proposed by Neubauer and Wedel that porosity's still at class A damage. For class A damage, its means no remedial action would be required until next major scheduled maintenance outage. That porosity's was grouped on isolated cavities and not need ti repair that main steam pipe component less than three year after replication test

  1. Acquisition of electrical signals using commercial electronic components for detection system of Lead ion in distilled water

    Science.gov (United States)

    Pujiyanto; Yasin, M.; Rusydi, F.

    2018-03-01

    Development of lead ion detection systems is expected to have an advantage in terms of simplicity of the device and easy for concentration analysis of a lead ion with very high performance. One important part of lead ion detection systems are electrical signal acquisition parts. The electrical signal acquisition part uses the main electronic components: non inverting op-amplifier, instrumentation amplifier, multiplier circuit and logarithmic amplifier. Here will be shown the performance of lead ion detection systems when the existing electrical signal processors use commercial electronic components. The results that can be drawn from this experimental were the lead ion sensor that has been developed can be used to detect lead ions with a sensitivity of 10.48 mV/ppm with the linearity 97.11% and had a measurement range of 0.1 ppm to 80 ppm.

  2. Identification of high performance and component technology for space electrical power systems for use beyond the year 2000

    Science.gov (United States)

    Maisel, James E.

    1988-01-01

    Addressed are some of the space electrical power system technologies that should be developed for the U.S. space program to remain competitive in the 21st century. A brief historical overview of some U.S. manned/unmanned spacecraft power systems is discussed to establish the fact that electrical systems are and will continue to become more sophisticated as the power levels appoach those on the ground. Adaptive/Expert power systems that can function in an extraterrestrial environment will be required to take an appropriate action during electrical faults so that the impact is minimal. Manhours can be reduced significantly by relinquishing tedious routine system component maintenance to the adaptive/expert system. By cataloging component signatures over time this system can set a flag for a premature component failure and thus possibly avoid a major fault. High frequency operation is important if the electrical power system mass is to be cut significantly. High power semiconductor or vacuum switching components will be required to meet future power demands. System mass tradeoffs have been investigated in terms of operating at high temperature, efficiency, voltage regulation, and system reliability. High temperature semiconductors will be required. Silicon carbide materials will operate at a temperature around 1000 K and the diamond material up to 1300 K. The driver for elevated temperature operation is that radiator mass is reduced significantly because of inverse temperature to the fourth power.

  3. Shame: The Emotional Basis of Library Anxiety

    Science.gov (United States)

    McAfee, Erin L.

    2018-01-01

    In 1986, Constance Mellon found that 75 to 85 percent of undergraduate students experienced library anxiety as well as shame about their anxiety. Fifteen years earlier, Helen Block Lewis began her groundbreaking research in shame theory. This paper explores the affective components of library anxiety using the pioneering research of Constance…

  4. Robust estimation and forecasting of the long-term seasonal component of electricity spot prices

    International Nuclear Information System (INIS)

    Nowotarski, Jakub; Tomczyk, Jakub; Weron, Rafał

    2013-01-01

    We present the results of an extensive study on estimation and forecasting of the long-term seasonal component (LTSC) of electricity spot prices. We consider a battery of over 300 models, including monthly dummies and models based on Fourier or wavelet decomposition combined with linear or exponential decay. We find that the considered wavelet-based models are significantly better in terms of forecasting spot prices up to a year ahead than the commonly used monthly dummies and sine-based models. This result questions the validity and usefulness of stochastic models of spot electricity prices built on the latter two types of LTSC models. - Highlights: • First comprehensive study on the forecasting of the long-term seasonal components • Over 300 models examined, including commonly used and new approaches • Wavelet-based models outperform sine-based and monthly dummy models. • Validity of stochastic models built on sines or monthly dummies is questionable

  5. Towards C++ object libraries for accelerator physics

    International Nuclear Information System (INIS)

    Michelotti, L.

    1992-01-01

    This paper concerns creation of libraries of reusable objects in the language C ++ for doing accelerator design and analysis. The C ++ language possesses features which lend themselves to writing portable, scientific solftware. The two libraries of C ++ classes (objects) which have been under development are (1) MXYZPTLK, which implements automatic differentiation and (2) BEAMLINE, which provides objects for modeling beam line and accelerator components. A description of the principle classes in these two libraries is presented

  6. THEWASP library. Thermodynamic water and steam properties library in GPU

    International Nuclear Information System (INIS)

    Waintraub, M.; Lapa, C.M.F.; Mol, A.C.A.; Heimlich, A.

    2011-01-01

    In this paper we present a new library for thermodynamic evaluation of water properties, THEWASP. This library consists of a C++ and CUDA based programs used to accelerate a function evaluation using GPU and GPU clusters. Global optimization problems need thousands of evaluations of the objective functions to nd the global optimum implying in several days of expensive processing. This problem motivates to seek a way to speed up our code, as well as to use MPI on Beowulf clusters, which however increases the cost in terms of electricity, air conditioning and others. The GPU based programming can accelerate the implementation up to 100 times and help increase the number of evaluations in global optimization problems using, for example, the PSO or DE Algorithms. THEWASP is based on Water-Steam formulations publish by the International Association for the properties of water and steam, Lucerne - Switzerland, and provides several temperature and pressure function evaluations, such as specific heat, specific enthalpy, specific entropy and also some inverse maps. In this study we evaluated the gain in speed and performance and compared it a CPU based processing library. (author)

  7. Identifying spikes and seasonal components in electricity spot price data: A guide to robust modeling

    International Nuclear Information System (INIS)

    Janczura, Joanna; Trück, Stefan; Weron, Rafał; Wolff, Rodney C.

    2013-01-01

    An important issue in fitting stochastic models to electricity spot prices is the estimation of a component to deal with trends and seasonality in the data. Unfortunately, estimation routines for the long-term and short-term seasonal pattern are usually quite sensitive to extreme observations, known as electricity price spikes. Improved robustness of the model can be achieved by (a) filtering the data with some reasonable procedure for outlier detection, and then (b) using estimation and testing procedures on the filtered data. In this paper we examine the effects of different treatments of extreme observations on model estimation and on determining the number of spikes (outliers). In particular we compare results for the estimation of the seasonal and stochastic components of electricity spot prices using either the original or filtered data. We find significant evidence for a superior estimation of both the seasonal short-term and long-term components when the data have been treated carefully for outliers. Overall, our findings point out the substantial impact the treatment of extreme observations may have on these issues and, therefore, also on the pricing of electricity derivatives like futures and option contracts. An added value of our study is the ranking of different filtering techniques used in the energy economics literature, suggesting which methods could be and which should not be used for spike identification. - Highlights: • First comprehensive study on the impact of spikes on seasonal pattern estimation • The effects of different treatments of spikes on model estimation are examined. • Cleaning spot prices for outliers yields superior estimates of the seasonal pattern. • Removing outliers provides better parameter estimates for the stochastic process. • Rankings of filtering techniques suggested in the literature are provided

  8. Reliability Assessment of Offshore Wind Turbines Considering Faults of Electrical / Mechanical Components

    DEFF Research Database (Denmark)

    Kostandyan, Erik; Sørensen, John Dalsgaard

    2013-01-01

    For offshore wind turbines, the cost contribution to Cost of Energy from inspections and Operation & Maintenance can be substantial, and can be expected to increase when wind farms are placed at deeper water depths, further from the coast and in more harsh environments. Estimates of the reliability...... is considered and related to reliability estimation by taking into account faults e.g. due to failure of an electrical component or loss of grid....

  9. The selection of radiation tolerant electrical/electronic components for gamma radiation environments in the nuclear power industry

    International Nuclear Information System (INIS)

    Garlick, D.R.

    1984-09-01

    This report briefly describes the mechanisms, units and effects of 1 MeV range gamma radiation on electrical/electronic components and materials. Information is tabulated on the gamma radiation tolerance of a wide range of components and materials. A radiation testing service, based at Harwell, is described. Lists of interested manufacturers and organisations are given. (author)

  10. Electrical Signal Path Study and Component Assay for the MAJORANA N-Type Segmented Contact Detector

    International Nuclear Information System (INIS)

    Amman, Mark; Bergevin, Marc; Chan, Yuen-Dat; Detwiler, Jason A.; Fujikawa, Brian; Lesko, Kevin T.; Luke, Paul N.; Prior, Gersende; Poon, Alan W.; Smith, Alan R.; Vetter, Kai; Yaver, Harold; Zimmermann, Sergio

    2009-01-01

    The purpose of the present electrical signal path study is to explore the various issues related to the deployment of highly-segmented low-background Ge detectors for the MAJORANA double-beta decay experiment. A significant challenge is to simultaneously satisfy competing requirements for the mechanical design, electrical readout performance, and radiopurity specifications from the MAJORANA project. Common to all rare search experiments, there is a very stringent limit on the acceptable radioactivity level of all the electronics components involved. Some of the findings are summarized in this report.

  11. Electrical Signal Path Study and Component Assay for the MAJORANA N-Type Segmented Contact Detector

    Energy Technology Data Exchange (ETDEWEB)

    Amman, Mark; Bergevin, Marc; Chan, Yuen-Dat; Detwiler, Jason A.; Fujikawa, Brian .; Lesko, Kevin T.; Luke, Paul N.; Prior, Gersende; Poon, Alan W.; Smith, Alan R.; Vetter, Kai; Yaver, Harold; Zimmermann, Sergio

    2009-02-24

    The purpose of the present electrical signal path study is to explore the various issues related to the deployment of highly-segmented low-background Ge detectors for the MAJORANA double-beta decay experiment. A significant challenge is to simultaneously satisfy competing requirements for the mechanical design, electrical readout performance, and radiopurity specifications from the MAJORANA project. Common to all rare search experiments, there is a very stringent limit on the acceptable radioactivity level of all the electronics components involved. Some of the findings are summarized in this report.

  12. Modeling of discharge-triggered electric field redistribution on the interior components of a satellite

    International Nuclear Information System (INIS)

    Varga, L.; Horvath, E.B.

    1999-01-01

    This work examines an electrostatic charging/discharging cycle of a populated circuit board inside an equipment housing of a satellite at GEO. Component potentials and electric field strengths are examined before and after a common ground discharge event. Field reversal after the discharge suggests that favourable conditions exist for charge dissipation from dielectrics. (authors)

  13. Analysis of market signals in a competitive electricity market using components of network rental

    International Nuclear Information System (INIS)

    Amarasinghe, L.Y.C.; Annakkage, U.D.

    2009-01-01

    In the competitive electricity market, Locational Marginal Prices (LMPs) are important pricing signals for the participants as the effects of transmission losses and binding constraints are embedded in LMPs. While these LMPs provide valuable information at each location, they do not provide a detailed description in terms of contributing terms. The LMP components, on the other hand, show the explicit decomposition of LMP into contributing components, and thus, can be considered as better market signals. However, the effects of transmission losses cannot be explicitly seen from the LMP components. In this paper, the components of network rental is proposed to be used as a method in analyzing market signals, by decomposing the network rental into contributing components among the consumers. Since, the network rental is the surplus paid by all the consumers, components of network rental show how each consumer has actually overpaid due to losses and each binding constraint separately. A case study is also presented to demonstrate the potential of this proposed method in market signal analysis. (author)

  14. Application of sandwich honeycomb carbon/glass fiber-honeycomb composite in the floor component of electric car

    Science.gov (United States)

    Sukmaji, I. C.; Wijang, W. R.; Andri, S.; Bambang, K.; Teguh, T.

    2017-01-01

    Nowadays composite is a superior material used in automotive component due to its outstanding mechanical behavior. The sandwich polypropylene honeycomb core with carbon/glass fiber composite skin (SHCG) as based material in a floor component of electric car application is investigated in the present research. In sandwich structure form, it can absorb noise better compare with the conventional material [1]. Also in present paper, Finite Element Analysis (FEA) of SHCG as based material for floor component of the electric car is analyzed. The composite sandwich is contained with a layer uniform carbon fiber and mixing non-uniform carbon-glass fiber in upper and lower skin. Between skins of SHCG are core polypropylene honeycomb that it have good flexibility to form following dies profile. The variables of volume fraction ratio of carbon/glass fiber in SHCG skin are 20/80%, 30/70%, and 50/50%. The specimen of SHCG is tested using the universal testing machine by three points bending method refers to ASTM C393 and ASTM C365. The cross point between tensile strength to the volume fraction the mixing carbon/glass line and ratio cost line are the searched material with good mechanical performance and reasonable cost. The point is 30/70 volume fraction of carbon/glass fiber. The result of the testing experiment is become input properties of model structure sandwich in FEA simulation. FEA simulation approach is conducted to find critical strength and factor of complex safety geometry against varied distributed passenger loads of a floor component the electric car. The passenger loads variable are 80, 100, 150, 200, 250 and 300 kg.

  15. Update of PHOENIX-P 42 group library from CENDL-2

    International Nuclear Information System (INIS)

    Zhang Baocheng

    1998-01-01

    PHOENIX-P is a lattice physics code system, developed by the Westinghouse Electric Corporation (WEC), which was transplanted and used at Dayabay Nuclear Power Plant (DNPJVC). The associated multi-group (42-group) library was derived from the evaluated nuclear data of ENDF/B-5. Since the original library is from the old evaluated nuclear data, it can not meet all the requirements of reactor physics calculations of the nuclear power plant. So it is necessary to update the library with the latest version of evaluated nuclear data. To do so, based on the investigation of the old library and the information about the library, some programs were developed at China Nuclear Data Center (CNDC) to produce PHOENIX-P format data sets mainly from CENDL-2 and the new data were used to supersede the old ones of the PHOENIX-P library

  16. Historic Buildings and Modern Technology: The California State Library Remodels for Automation--A Case Study.

    Science.gov (United States)

    Hudson, Kathy

    1987-01-01

    Provides background on the California State Library, a description of the Library and Courts Building, and a summary of automation objectives. Concerns in renovation to accommodate a modern library are then discussed: (1) environment; (2) electrical and telephone circuitry; (3) data and voice communications; (4) physical factors; and (5)…

  17. Organizational prerequisites for the preservation of library collections in monastery libraries

    Directory of Open Access Journals (Sweden)

    Maja Krtalić

    2012-02-01

    libraries. The conceptual approach to heritage preservation in monastery libraries used in this paper is based on the theoretical model of written heritage preservation management that comprises five aspects bringing together the theoretical, strategic, legal, financial, educational, operative, and cultural components. Monastery libraries are facing many problems in protection and preservation of collections. Most of their problems fall under the economic, legal, material and operative aspects of preservation. In addition to the most common limitations, such as financial constraints, inadequate premises for keeping and storing the collections, they often have staff shortages, especially of trained staff with particular knowledge and skills required to protect the collections of such libraries, which brings the educational aspect of preservation into the foreground. Even though the protection and preservation of library collections in monastery libraries is mostly the responsibility of monastery monks, their knowledge is mostly not expert enough and they cannot be the only ones made responsible for preservation. This issue needs to be considered from the strategic and theoretical aspects of written heritage preservation management. One of the major hurdles is the inadequacy of legislation and its lack of recognition of those collections as national heritage. One of the factors that needs to be taken into consideration are changes that occur in the cultural and social contexts, i.e. changes in relations between church orders and communities in which they are active. Based on the data collected and relying on the conceptual model of written heritage preservation management in the Republic of Croatia, the current state of monastery library collections preservation has been established and measures for a systematic and more efficient management of written heritage preservation in monastery libraries have been proposed.

  18. Recent Developments of the Modelica"Buildings" Library for Building Energy and Control Systems

    Energy Technology Data Exchange (ETDEWEB)

    Wetter, Michael; Zuo, Wangda; Nouidui, Thierry Stephane

    2011-04-01

    At the Modelica 2009 conference, we introduced the Buildings library, a freely available Modelica library for building energy and control systems. This paper reports the updates of the library and presents example applications for a range of heating, ventilation and air conditioning (HVAC) systems. Over the past two years, the library has been further developed. The number of HVAC components models has been doubled and various components have been revised to increase numerical robustness.The paper starts with an overview of the library architecture and a description of the main packages. To demonstrate the features of the Buildings library, applications that include multizone airflow simulation as well as supervisory and local loop control of a variable air volume (VAV) system are briefly described. The paper closes with a discussion of the current development.

  19. A Wind Farm Electrical Systems Evaluation with EeFarm-II

    Directory of Open Access Journals (Sweden)

    Jan Pierik

    2010-03-01

    Full Text Available EeFarm-II is used to evaluate 13 different electrical systems for a 200 MW wind farm with a 100 km connection to shore. The evaluation is based on component manufacturer data of 2009. AC systems are compared to systems with DC connections inside the wind farm and DC connection to shore. Two options have the best performance for this wind farm size and distance: the AC system and the system with a DC connection to shore. EeFarm-II is a user friendly computer program for wind farm electrical and economic evaluation. It has been built as a Simulink Library in the graphical interface of Matlab-Simulink. EeFarm-II contains models of wind turbines, generators, transformers, AC cables, inductors, nodes, splitters, PWM converters, thyristor converters, DC cables, choppers and statcoms.

  20. Implementation of the Ohio College Library Center's Proposed Serials Control Subsystem at the University of South Florida Library: Some Preliminary Considerations.

    Science.gov (United States)

    Twitchell, Anne; Sprehn, Mary

    An evaluation of the Ohio College Library Center's (OCLC) proposed Serials Control Subsystem was undertaken to determine what effect the system would have on the operation of the Serials Department at the University of South Florida (USF) Library. The system would consist of three components: 1) claiming--identifying missing issues and generating…

  1. Magnetic compatibility of standard components for electrical installations: Computation of the background field and consequences on the design of the electrical distribution boards and control boards for the ITER Tokamak building

    International Nuclear Information System (INIS)

    Benfatto, I.; Bettini, P.; Cavinato, M.; Lorenzi, A. De; Hourtoule, J.; Serra, E.

    2005-01-01

    Inside the proposed Tokamak building, the ITER poloidal field magnet system would produce a stray magnetic field up to 70 mT. This is a very unusual environmental condition for electrical installation equipment and limited information is available on the magnetic compatibility of standard components for electrical distribution boards and control boards. Because this information is a necessary input for the design of the electrical installation inside the proposed ITER Tokamak building specific investigations have been carried out by the ITER European Participant Team. The paper reports on the computation of the background magnetic field map inside the ITER Tokamak building and the consequences on the design of the electrical installations of this building. The effects of the steel inside the building structure and the feasibility of magnetic shields for electrical distribution boards and control boards are also reported in the paper. The results of the test campaigns on the magnetic field compatibility of standard components for electrical distribution boards and control boards are reported in companion papers published in these proceedings

  2. NSUF Irradiated Materials Library

    Energy Technology Data Exchange (ETDEWEB)

    Cole, James Irvin [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    The Nuclear Science User Facilities has been in the process of establishing an innovative Irradiated Materials Library concept for maximizing the value of previous and on-going materials and nuclear fuels irradiation test campaigns, including utilization of real-world components retrieved from current and decommissioned reactors. When the ATR national scientific user facility was established in 2007 one of the goals of the program was to establish a library of irradiated samples for users to access and conduct research through competitively reviewed proposal process. As part of the initial effort, staff at the user facility identified legacy materials from previous programs that are still being stored in laboratories and hot-cell facilities at the INL. In addition other materials of interest were identified that are being stored outside the INL that the current owners have volunteered to enter into the library. Finally, over the course of the last several years, the ATR NSUF has irradiated more than 3500 specimens as part of NSUF competitively awarded research projects. The Logistics of managing this large inventory of highly radioactive poses unique challenges. This document will describe materials in the library, outline the policy for accessing these materials and put forth a strategy for making new additions to the library as well as establishing guidelines for minimum pedigree needed to be included in the library to limit the amount of material stored indefinitely without identified value.

  3. A protein-dependent side-chain rotamer library.

    KAUST Repository

    Bhuyan, M.S.; Gao, Xin

    2011-01-01

    Protein side-chain packing problem has remained one of the key open problems in bioinformatics. The three main components of protein side-chain prediction methods are a rotamer library, an energy function and a search algorithm. Rotamer libraries summarize the existing knowledge of the experimentally determined structures quantitatively. Depending on how much contextual information is encoded, there are backbone-independent rotamer libraries and backbone-dependent rotamer libraries. Backbone-independent libraries only encode sequential information, whereas backbone-dependent libraries encode both sequential and locally structural information. However, side-chain conformations are determined by spatially local information, rather than sequentially local information. Since in the side-chain prediction problem, the backbone structure is given, spatially local information should ideally be encoded into the rotamer libraries. In this paper, we propose a new type of backbone-dependent rotamer library, which encodes structural information of all the spatially neighboring residues. We call it protein-dependent rotamer libraries. Given any rotamer library and a protein backbone structure, we first model the protein structure as a Markov random field. Then the marginal distributions are estimated by the inference algorithms, without doing global optimization or search. The rotamers from the given library are then re-ranked and associated with the updated probabilities. Experimental results demonstrate that the proposed protein-dependent libraries significantly outperform the widely used backbone-dependent libraries in terms of the side-chain prediction accuracy and the rotamer ranking ability. Furthermore, without global optimization/search, the side-chain prediction power of the protein-dependent library is still comparable to the global-search-based side-chain prediction methods.

  4. A protein-dependent side-chain rotamer library.

    KAUST Repository

    Bhuyan, M.S.

    2011-12-14

    Protein side-chain packing problem has remained one of the key open problems in bioinformatics. The three main components of protein side-chain prediction methods are a rotamer library, an energy function and a search algorithm. Rotamer libraries summarize the existing knowledge of the experimentally determined structures quantitatively. Depending on how much contextual information is encoded, there are backbone-independent rotamer libraries and backbone-dependent rotamer libraries. Backbone-independent libraries only encode sequential information, whereas backbone-dependent libraries encode both sequential and locally structural information. However, side-chain conformations are determined by spatially local information, rather than sequentially local information. Since in the side-chain prediction problem, the backbone structure is given, spatially local information should ideally be encoded into the rotamer libraries. In this paper, we propose a new type of backbone-dependent rotamer library, which encodes structural information of all the spatially neighboring residues. We call it protein-dependent rotamer libraries. Given any rotamer library and a protein backbone structure, we first model the protein structure as a Markov random field. Then the marginal distributions are estimated by the inference algorithms, without doing global optimization or search. The rotamers from the given library are then re-ranked and associated with the updated probabilities. Experimental results demonstrate that the proposed protein-dependent libraries significantly outperform the widely used backbone-dependent libraries in terms of the side-chain prediction accuracy and the rotamer ranking ability. Furthermore, without global optimization/search, the side-chain prediction power of the protein-dependent library is still comparable to the global-search-based side-chain prediction methods.

  5. Design of modern vehicle electrical systems based on co-simulation and a model library; Entwurf moderner Bordnetze mittels Co-Simulation und Modellbibliothek

    Energy Technology Data Exchange (ETDEWEB)

    Zehetner, Josef; Lu, Di Wenpu; Watzenig, Daniel [Virtual Vehicle Research Center, Graz (Austria)

    2013-08-15

    The complexity of vehicle electrical and electronic systems, components, and functions is growing as they become increasingly networked with each other and with the internet. Vehicle electrical systems developers can manage this complexity now and in the future by employing simulation as a central tool in designing powerful and reliable vehicle electrical systems. Bosch Engineering offers a powerful simulation tool to support the design of vehicle power nets from initial requirements to final series approval, now being used also for hybrid and electric drive train development. (orig.)

  6. An Affordable Microcomputer Library Information System Developed by Georgetown University.

    Science.gov (United States)

    Broering, Naomi C.

    1984-01-01

    Discusses development of a library information system by Georgetown University Medical Center's Dahlgren Memorial Library; describes its components, including online catalog and OCLC interface, circulation, serials control, acquisitions, networking/interlibrary loans, word processing and mini-Medline system; and discusses user reaction, staff…

  7. The Renaissance in Library Buildings

    Directory of Open Access Journals (Sweden)

    Sarah E. Thomas

    2004-05-01

    Full Text Available In the enthusiastic embrace of the digital library, with its anytime, anywhere characteristics, some people have assumed that physical libraries will become obsolete. Yet an examination of the behavior of students and faculty and of recent renovation and construction of academic and research libraries shows that brick and mortar buildings are enjoying a renaissance. Libraries have traditionally supported the housing of collections, reader services, and the staff who manage collections and provide services. These three components continue in the 21st century, but librarians, architects, and users are collaborating to produce elegant and functional designs that reflect new spatial allocations and new purposes. Modern libraries incorporate flexibility and comfort to create an environment that is welcoming and that supports a range of research and learning activities. This paper draws on examples from recent construction and reconfiguration of academic libraries in the United States to illustrate the changing scope of the physical library and the important role it plays in serving as a community hub within a university. Among the examples selected are several relating to the challenges of collection management, including the use of compact shelving and high-density storage facilities. The paper also traces the evolution of spaces from the catalog card era to the present state in which wireless access is a standard feature. Lastly, the author touches on new and expanded roles for librarians and the ways in which design advances the effectiveness of information professionals in fulfilling these new roles.

  8. Financial management in academic libraries data-driven planning and budgeting

    CERN Document Server

    Dugan, Robert E

    2017-01-01

    Financial Management in Academic Libraries explores the connection between financial management and accountability, effectiveness, efficiency, and sustainability, and demonstrates how to capture them in a realistic, data-supported budget. Among the different units of an academic institution, the library has an advantage in that its managers can link these concepts to the library's infrastructure, its staffing, collections, services, and technology. Focusing on these components can enable everyone in the library to work to achieve organizational sustainability over time and advocate for their place in the institution.

  9. Block copolymer libraries: modular versatility of the macromolecular Lego system.

    Science.gov (United States)

    Lohmeijer, Bas G G; Wouters, Daan; Yin, Zhihui; Schubert, Ulrich S

    2004-12-21

    The synthesis and characterization of a new 4 x 4 library of block copolymers based on polystyrene and poly(ethylene oxide) connected by an asymmetrical octahedral bis(terpyridine) ruthenium complex at the block junction are described, while initial studies on the thin film morphology of the components of the library are presented by the use of Atomic Force Microscopy, demonstrating the impact of a library approach to derive structure-property relationships.

  10. The Use of Quality Benchmarking in Assessing Web Resources for the Dermatology Virtual Branch Library of the National electronic Library for Health (NeLH)

    OpenAIRE

    Boulos, MN Kamel; Roudsari, AV; Gordon, C; Gray, JA Muir

    2001-01-01

    Background In 1998, the U.K. National Health Service Information for Health Strategy proposed the implementation of a National electronic Library for Health to provide clinicians, healthcare managers and planners, patients and the public with easy, round the clock access to high quality, up-to-date electronic information on health and healthcare. The Virtual Branch Libraries are among the most important components of the National electronic Library for Health . They aim at creating online kno...

  11. iTesla Power Systems Library (iPSL): A Modelica library for phasor time-domain simulations

    Science.gov (United States)

    Vanfretti, L.; Rabuzin, T.; Baudette, M.; Murad, M.

    The iTesla Power Systems Library (iPSL) is a Modelica package providing a set of power system components for phasor time-domain modeling and simulation. The Modelica language provides a systematic approach to develop models using a formal mathematical description, that uniquely specifies the physical behavior of a component or the entire system. Furthermore, the standardized specification of the Modelica language (Modelica Association [1]) enables unambiguous model exchange by allowing any Modelica-compliant tool to utilize the models for simulation and their analyses without the need of a specific model transformation tool. As the Modelica language is being developed with open specifications, any tool that implements these requirements can be utilized. This gives users the freedom of choosing an Integrated Development Environment (IDE) of their choice. Furthermore, any integration solver can be implemented within a Modelica tool to simulate Modelica models. Additionally, Modelica is an object-oriented language, enabling code factorization and model re-use to improve the readability of a library by structuring it with object-oriented hierarchy. The developed library is released under an open source license to enable a wider distribution and let the user customize it to their specific needs. This paper describes the iPSL and provides illustrative application examples.

  12. Bridges and Barriers: Factors Influencing a Culture of Assessment in Academic Libraries

    Science.gov (United States)

    Farkas, Meredith Gorran; Hinchliffe, Lisa Janicke; Houk, Amy Harris

    2015-01-01

    In an environment in which libraries need to demonstrate value, illustrating how the library contributes to student learning is critical. Gathering and analyzing data to tell the library's story as well as identify areas for improvement require commitment, time, effort, and resources--all components of a culture of assessment. This paper presents…

  13. CHEMICAL EVOLUTION LIBRARY FOR GALAXY FORMATION SIMULATION

    International Nuclear Information System (INIS)

    Saitoh, Takayuki R.

    2017-01-01

    We have developed a software library for chemical evolution simulations of galaxy formation under the simple stellar population (SSP) approximation. In this library, all of the necessary components concerning chemical evolution, such as initial mass functions, stellar lifetimes, yields from Type II and Type Ia supernovae, asymptotic giant branch stars, and neutron star mergers, are compiled from the literature. Various models are pre-implemented in this library so that users can choose their favorite combination of models. Subroutines of this library return released energy and masses of individual elements depending on a given event type. Since the redistribution manner of these quantities depends on the implementation of users’ simulation codes, this library leaves it up to the simulation code. As demonstrations, we carry out both one-zone, closed-box simulations and 3D simulations of a collapsing gas and dark matter system using this library. In these simulations, we can easily compare the impact of individual models on the chemical evolution of galaxies, just by changing the control flags and parameters of the library. Since this library only deals with the part of chemical evolution under the SSP approximation, any simulation codes that use the SSP approximation—namely, particle-base and mesh codes, as well as semianalytical models—can use it. This library is named “CELib” after the term “Chemical Evolution Library” and is made available to the community.

  14. CHEMICAL EVOLUTION LIBRARY FOR GALAXY FORMATION SIMULATION

    Energy Technology Data Exchange (ETDEWEB)

    Saitoh, Takayuki R., E-mail: saitoh@elsi.jp [Earth-Life Science Institute, Tokyo Institute of Technology, 2-12-1, Ookayama, Meguro, Tokyo, 152-8551 (Japan)

    2017-02-01

    We have developed a software library for chemical evolution simulations of galaxy formation under the simple stellar population (SSP) approximation. In this library, all of the necessary components concerning chemical evolution, such as initial mass functions, stellar lifetimes, yields from Type II and Type Ia supernovae, asymptotic giant branch stars, and neutron star mergers, are compiled from the literature. Various models are pre-implemented in this library so that users can choose their favorite combination of models. Subroutines of this library return released energy and masses of individual elements depending on a given event type. Since the redistribution manner of these quantities depends on the implementation of users’ simulation codes, this library leaves it up to the simulation code. As demonstrations, we carry out both one-zone, closed-box simulations and 3D simulations of a collapsing gas and dark matter system using this library. In these simulations, we can easily compare the impact of individual models on the chemical evolution of galaxies, just by changing the control flags and parameters of the library. Since this library only deals with the part of chemical evolution under the SSP approximation, any simulation codes that use the SSP approximation—namely, particle-base and mesh codes, as well as semianalytical models—can use it. This library is named “CELib” after the term “Chemical Evolution Library” and is made available to the community.

  15. About the Library - Betty Petersen Memorial Library

    Science.gov (United States)

    branch library of the NOAA Central Library. The library serves the NOAA Science Center in Camp Springs , Maryland. History and Mission: Betty Petersen Memorial Library began as a reading room in the NOAA Science Science Center staff and advises the library on all aspects of the library program. Library Newsletters

  16. A Brand New Way of Looking at Library Marketing

    Science.gov (United States)

    Germain, Carol Anne, Ed.

    2008-01-01

    Currently, one of the hottest topics in library marketing is branding. Over the years, businesses have utilized this technique to achieve commercial success. Is it possible for libraries to utilize this same strategy to promote their resources and services? One of the key components of a good branding campaign is passion, dedication, and a quality…

  17. Electrical grid requirements to be met by superconducting components of energy supply systems; Elektrische Netzanforderungen an supraleitende Komponenten der Energieversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Hoelter, D W; Radtke, U

    1995-05-01

    Suoerconducting components will reduce the effective losses of electrical equipment to practically zero. The new technology will bring about novel components with completely new or modified properties and capacities, and thus a number of economic advantages for grid operation. The novel components opened up by superconductivity technology are of particular interest to maximum and high-voltage applications. Components such as generators and transformers will be enhanced in their electrical performance, and effects of synergism are expected to be achieved in multi-functional applications of SMES and through specific combination of the components current limiter and cable, and transformer. (orig./MM) [Deutsch] Supraleitende Betriebsmittel reduzieren die Wirkverluste elektrischer Betriebsmittel praktisch auf null. Daraus resultieren Betriebsmittel mit neuen bzw. veraenderten elektrischen Eigenschaften, die fuer das Netz eine Reihe von Verbesserungen mit sich bringen koennen. Mit Supraleitung werden neuartige Betriebsmittel moeglich und fuer die Hoechst- und Hochspannungsebene wirtschaftlich attraktiv. Andere supraleitende Betriebsmittel wie Generator und Transformator erhalten verbesserte elektrische Eigenschaften. Synergieeffekte sind beim multi-funktionalen Einsatz des SMES und bei Kombination der Betriebsmittel Strombegrenzer und Kabel sowie Transformator zu erwarten. (orig./MM)

  18. America's Star Libraries, 2010: Top-Rated Libraries

    Science.gov (United States)

    Lyons, Ray; Lance, Keith Curry

    2010-01-01

    The "LJ" Index of Public Library Service 2010, "Library Journal"'s national rating of public libraries, identifies 258 "star" libraries. Created by Ray Lyons and Keith Curry Lance, and based on 2008 data from the IMLS, it rates 7,407 public libraries. The top libraries in each group get five, four, or three stars. All included libraries, stars or…

  19. Featured Library: Parrish Library

    OpenAIRE

    Kirkwood, Hal P, Jr

    2015-01-01

    The Roland G. Parrish Library of Management & Economics is located within the Krannert School of Management at Purdue University. Between 2005 - 2007 work was completed on a white paper that focused on a student-centered vision for the Management & Economics Library. The next step was a massive collection reduction and a re-envisioning of both the services and space of the library. Thus began a 3 phase renovation from a 2 floor standard, collection-focused library into a single floor, 18,000s...

  20. Computer software program for monitoring the availability of systems and components of electric power generating systems

    International Nuclear Information System (INIS)

    Petersen, T.A.; Hilsmeier, T.A.; Kapinus, D.M.

    1994-01-01

    As availabilities of electric power generating stations systems and components become more and more important from a financial, personnel safety, and regulatory requirements standpoint, it is evident that a comprehensive, yet simple and user-friendly program for system and component tracking and monitoring is needed to assist in effectively managing the large volume of systems and components with their large numbers of associated maintenance/availability records. A user-friendly computer software program for system and component availability monitoring has been developed that calculates, displays and monitors selected component and system availabilities. This is a Windows trademark based (Graphical User Interface) program that utilizes a system flow diagram for the data input screen which also provides a visual representation of availability values and limits for the individual components and associated systems. This program can be customized to the user's plant-specific system and component selections and configurations. As will be discussed herein, this software program is well suited for availability monitoring and ultimately providing valuable information for improving plant performance and reducing operating costs

  1. Design of Concept Libraries for C++

    KAUST Repository

    Sutton, Andrew

    2012-01-01

    We present a set of concepts (requirements on template arguments) for a large subset of the ISO C++ standard library. The goal of our work is twofold: to identify a minimal and useful set of concepts required to constrain the library\\'s generic algorithms and data structures and to gain insights into how best to support such concepts within C++. We start with the design of concepts rather than the design of supporting language features; the language design must be made to fit the concepts, rather than the other way around. A direct result of the experiment is the realization that to simply and elegantly support generic programming we need two kinds of abstractions: constraints are predicates on static properties of a type, and concepts are abstract specifications of an algorithm\\'s syntactic and semantic requirements. Constraints are necessary building blocks of concepts. Semantic properties are represented as axioms. We summarize our approach: concepts = constraints + axioms. This insight is leveraged to develop a library containing only 14 concepts that encompassing the functional, iterator, and algorithm components of the C++ Standard Library (the STL). The concepts are implemented as constraint classes and evaluated using Clang\\'s and GCC\\'s Standard Library test suites. © 2012 Springer-Verlag.

  2. STAR Library Education Network: a hands-on learning program for libraries and their communities

    Science.gov (United States)

    Dusenbery, P.

    2010-12-01

    professional science and technology organizations (e.g. American Geophysical Union; National Academy of Engineering) that will provide speakers for host library events and webinars. Online and in-person workshops will be conducted for library staff with a focus on increasing content knowledge and improving facilitation expertise. This presentation will report on strategic planning activities for STAR-Net, a Community of Practice model, and the evaluation/research components of this national education program.

  3. Understanding the foundation: the state of generalist search education in library schools as related to the needs of expert searchers in medical libraries.

    Science.gov (United States)

    Nicholson, Scott

    2005-01-01

    The paper explores the current state of generalist search education in library schools and considers that foundation in respect to the Medical Library Association's statement on expert searching. Syllabi from courses with significant searching components were examined from ten of the top library schools, as determined by the U.S. News & World Report rankings. Mixed methods were used, but primarily quantitative bibliometric methods were used. The educational focus in these searching components was on understanding the generalist searching resources and typical users and on performing a reflective search through application of search strategies, controlled vocabulary, and logic appropriate to the search tool. There is a growing emphasis on Web-based search tools and a movement away from traditional set-based searching and toward free-text search strategies. While a core set of authors is used in these courses, no core set of readings is used. While library schools provide a strong foundation, future medical librarians still need to take courses that introduce them to the resources, settings, and users associated with medical libraries. In addition, as more emphasis is placed on Web-based search tools and free-text searching, instructors of the specialist medical informatics courses will need to focus on teaching traditional search methods appropriate for common tools in the medical domain.

  4. Multigroup cross section library; WIMS library

    International Nuclear Information System (INIS)

    Kannan, Umasankari

    2000-01-01

    The WIMS library has been extensively used in thermal reactor calculations. This multigroup constants library was originally developed from the UKNDL in the late 60's and has been updated in 1986. This library has been distributed with the WIMS-D code by NEA data bank. The references to WIMS library in literature are the 'old' which is the original as developed by the AEA Winfrith and the 'new' which is the current 1986 WIMS library. IAEA has organised a CRP where a new and fully updated WIMS library will soon be available. This paper gives an overview of the definitions of the group constants that go into any basic nuclear data library used for reactor calculations. This paper also outlines the contents of the WIMS library and some of its shortcomings

  5. Final report on the in situ testing of electrical components and devices at TMI-2

    International Nuclear Information System (INIS)

    Soberano, F.T.

    1984-06-01

    A total of 88 electrical components and devices were in situ tested. Of these, 11 totally failed and 21 suffered degradation that varied from mild to severe. The equipment that failed or incurred severe degradation was located in areas of known environmental extremes. Several motor operated valves in the Reactor Building basement failed because of submersion in water. Others severely degraded from contamination tracking, resulting in the alteration of their circuit electrical characteristics - a circumstance that could compromise their designed function. One backup oil lift pump motor for a reactor coolant pump motor, although located well above the Reactor Building basement high water mark, failed because of a break in its armature and field circuits; this failure was surmised to be a result of corrosion. The limit switch of a Class 1E solenoid valve likewise failed due to moisture intrusion. Components that noticeably degraded exhibited anomalies, likely due to the incursion of moisture, that varied from high capacitance to increased circuit resistance. The effect of the other degenerating conditions that existed during the accident, such as high temperature, high radiation levels, and the hydrogen burn, could not be evaluated individually or synergistically

  6. Asymptotic behavior of correlation functions for electric potential and field fluctuations in a classical one-component plasma

    NARCIS (Netherlands)

    Suttorp, L.G.

    1992-01-01

    The correlations of the electric potential fluctuations in a classical one-component plasma are studied for large distances between the observation points. The two-point correlation function for these fluctuations is known to decay slowly for large distances, even if exponential clustering holds for

  7. Library 3.0 intelligent libraries and apomediation

    CERN Document Server

    Kwanya, Tom; Underwood, Peter

    2015-01-01

    The emerging generation of research and academic library users expect the delivery of user-centered information services. 'Apomediation' refers to the supporting role librarians can give users by stepping in when users need help. Library 3.0 explores the ongoing debates on the "point oh” phenomenon and its impact on service delivery in libraries. This title analyses Library 3.0 and its potential in creating intelligent libraries capable of meeting contemporary needs, and the growing role of librarians as apomediators. Library 3.0 is divided into four chapters. The first chapter introduces and places the topic in context. The second chapter considers "point oh” libraries. The third chapter covers library 3.0 librarianship, while the final chapter explores ways libraries can move towards '3.0'.

  8. Developing a Marketing Orientation in Hospital Library Services: A Case Report.

    Science.gov (United States)

    Delawska-Elliott, Basia; Grinstead, Carrie; Martin, Heather J

    2015-01-01

    When the four Providence Health & Services libraries in Oregon regionalized services and resources, the transition, which was originally met with apprehension from some library users, turned out to be a resounding success. Despite a loss of two-thirds of the professional staff and a decreased budget, the new regionalized library experienced an increase in business and recognition. While many factors contributed to the success, a creative marketing and outreach campaign was a key component. This column describes the steps taken to promote regionalized library reference services and online resources.

  9. Croatian library leaders’ views on (their library quality

    Directory of Open Access Journals (Sweden)

    Kornelija Petr Balog

    2014-04-01

    Full Text Available The purpose of this paper is to determine and describe the library culture in Croatian public libraries. Semi-structured interviews with 14 library directors (ten public and four academic were conducted. The tentative discussion topics were: definition of quality, responsibility for quality, satisfaction with library services, familiarization with user perspective of library and librarians, monitoring of user expectations and opinions. These interviews incorporate some of the findings of the project Evaluation of library and information services: public and academic libraries. The project investigates library culture in Croatian public and academic libraries and their preparedness for activities of performance measurement. The interviews reveal that library culture has changed positively in the past few years and that library leaders have positive attitude towards quality and evaluation activities. Library culture in Croatian libraries is a relatively new concept and as such was not actively developed and/or created. This article looks into the library culture of Croatian libraries, but at the same time investigates whether there is any trace of culture of assessment in them. Also, this article brings the latest update on views, opinions and atmosphere in Croatian public and academic libraries.

  10. A multi-component nanocomposite screen-printed ink with non-linear touch sensitive electrical conductivity.

    Science.gov (United States)

    Webb, Alexander J; Szablewski, Marek; Bloor, David; Atkinson, Del; Graham, Adam; Laughlin, Paul; Lussey, David

    2013-04-26

    Printable electronics is an innovative area of technology with great commercial potential. Here, a screen-printed functional ink, comprising a combination of semiconducting acicular particles, electrically insulating nanoparticles and a base polymer ink, is described that exhibits pronounced pressure sensitive electrical properties for applications in sensing and touch sensitive surfaces. The combination of these components in the as-printed ink yield a complex structure and a large and reproducible touch pressure sensitive resistance range. In contrast to the case for some composite systems, the resistance changes occur down to applied pressures of 13 Pa. Current-voltage measurements at fixed pressures show monotonic non-linear behaviour, which becomes more Ohmic at higher pressures and in all cases shows some hysteresis. The physical basis for conduction, particularly in the low pressure regime, can be described in terms of field assisted quantum mechanical tunnelling.

  11. A multi-component nanocomposite screen-printed ink with non-linear touch sensitive electrical conductivity

    International Nuclear Information System (INIS)

    Webb, Alexander J; Szablewski, Marek; Bloor, David; Atkinson, Del; Graham, Adam; Laughlin, Paul; Lussey, David

    2013-01-01

    Printable electronics is an innovative area of technology with great commercial potential. Here, a screen-printed functional ink, comprising a combination of semiconducting acicular particles, electrically insulating nanoparticles and a base polymer ink, is described that exhibits pronounced pressure sensitive electrical properties for applications in sensing and touch sensitive surfaces. The combination of these components in the as-printed ink yield a complex structure and a large and reproducible touch pressure sensitive resistance range. In contrast to the case for some composite systems, the resistance changes occur down to applied pressures of 13 Pa. Current–voltage measurements at fixed pressures show monotonic non-linear behaviour, which becomes more Ohmic at higher pressures and in all cases shows some hysteresis. The physical basis for conduction, particularly in the low pressure regime, can be described in terms of field assisted quantum mechanical tunnelling. (paper)

  12. A multi-component nanocomposite screen-printed ink with non-linear touch sensitive electrical conductivity

    Science.gov (United States)

    Webb, Alexander J.; Szablewski, Marek; Bloor, David; Atkinson, Del; Graham, Adam; Laughlin, Paul; Lussey, David

    2013-04-01

    Printable electronics is an innovative area of technology with great commercial potential. Here, a screen-printed functional ink, comprising a combination of semiconducting acicular particles, electrically insulating nanoparticles and a base polymer ink, is described that exhibits pronounced pressure sensitive electrical properties for applications in sensing and touch sensitive surfaces. The combination of these components in the as-printed ink yield a complex structure and a large and reproducible touch pressure sensitive resistance range. In contrast to the case for some composite systems, the resistance changes occur down to applied pressures of 13 Pa. Current-voltage measurements at fixed pressures show monotonic non-linear behaviour, which becomes more Ohmic at higher pressures and in all cases shows some hysteresis. The physical basis for conduction, particularly in the low pressure regime, can be described in terms of field assisted quantum mechanical tunnelling.

  13. Generic component failure data base

    International Nuclear Information System (INIS)

    Eide, S.A.; Calley, M.B.

    1992-01-01

    This report discusses comprehensive component generic failure data base which has been developed for light water reactor probabilistic risk assessments. The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) was used to generate component failure rates. Using this approach, most of the failure rates are based on actual plant data rather then existing estimates

  14. Electric field-induced reorganization of two-component supported bilayer membranes.

    Science.gov (United States)

    Groves, J T; Boxer, S G; McConnell, H M

    1997-12-09

    Application of electric fields tangent to the plane of a confined patch of fluid bilayer membrane can create lateral concentration gradients of the lipids. A thermodynamic model of this steady-state behavior is developed for binary systems and tested with experiments in supported lipid bilayers. The model uses Flory's approximation for the entropy of mixing and allows for effects arising when the components have different molecular areas. In the special case of equal area molecules the concentration gradient reduces to a Fermi-Dirac distribution. The theory is extended to include effects from charged molecules in the membrane. Calculations show that surface charge on the supporting substrate substantially screens electrostatic interactions within the membrane. It also is shown that concentration profiles can be affected by other intermolecular interactions such as clustering. Qualitative agreement with this prediction is provided by comparing phosphatidylserine- and cardiolipin-containing membranes.

  15. Anaphe - OO Libraries and Tools for Data Analysis

    CERN Document Server

    Couet, O; Molnar, Z; Moscicki, J T; Pfeiffer, A; Sang, M

    2001-01-01

    The Anaphe project is an ongoing effort to provide an Object Oriented software environment for data analysis in HENP experiments. A range of commercial and public domain libraries is used to cover basic functionalities; on top of these libraries a set of HENP-specific C++ class libraries for histogram management, fitting, plotting and ntuple-like data analysis has been developed. In order to comply with the user requirements for a command-line driven tool, we have chosen to use a scripting language (Python) as the front-end for a data analysis tool. The loose coupling provided by the consequent use of (AIDA compliant) Abstract Interfaces for each component in combination with the use of shared libraries for their implementation provides an easy integration of existing libraries into modern scripting languages thus allowing for rapid application development. This integration is simplified even further using a specialised toolkit (SWIG) to create "shadow classes" for the Python language, which map the definitio...

  16. Signage by Design: A Design-Thinking Approach to Library User Experience

    Directory of Open Access Journals (Sweden)

    Edward Luca

    2016-01-01

    Full Text Available Signage is a powerful visual tool for communication and a crucial component of the library user experience. Signage can welcome, guide, instruct, and delight users, helping them navigate the complex information world of any library. In practice, however, signage can be problematic, revealing tensions between various stakeholders, and contributing to visual noise through information overload; this often leads to signage blindness, library anxiety, and confusion. This article explores how libraries can use a design-thinking approach to improve the user experience in physical library spaces, particularly with respect to signage, based on our experience at the UTS Library, a university library in Australia that serves the University of Technology Sydney (UTS. We found that a design-thinking approach that uses the processes of empathy, problem definition, solution ideation, prototyping, and testing, can help libraries make significant and meaningful changes that can be adopted at relatively low cost.

  17. Component, Context and Manufacturing Model Library (C2M2L)

    Science.gov (United States)

    2013-03-01

    Penn State team were stored in a relational database for easy access, storage and maintainability. The relational database consisted of a PostGres ...file into a format that can be imported into the PostGres database. This same custom application was used to generate Microsoft Excel templates...Press Break Forming Equipment 4.14 Manufacturing Model Library Database Structure The data storage mechanism for the ARL PSU MML was a PostGres database

  18. Design of variable energy and price components of electricity tariffs as an incentive for system-efficient energy management of flexible consumers in households

    International Nuclear Information System (INIS)

    Schreiber, Michael

    2017-01-01

    To mitigate anthropogenic climate change, both the heating and transport sectors will need to be electrically driven, with the higher electrical demand met by emission-free technologies, in addition to general efficiency improvements. On the generation side, wind and photovoltaic power plants must have a rated power significantly exceeding the current peak demand, in order to cover this increased electrical requirement. On the consumption side, heat pumps and private electric vehicles will increase the percentage of energy withdrawn at the low-voltage level of the new system. Given the right incentives, these customers will shift the energy demand in such a way as to benefit the system. This flexibility can be used as a tool to deal with variable renewable insertion while avoiding simultaneous overloading of the power grid. This thesis analyses and evaluates the effects of different electricity tariff designs on energy consumption. These tariffs should incentivise households to adapt their energy consumption to market prices, without inducing critical peak demands in times of particularly low prices. Therefore, time-varying energy price components and power price components are combined into flexible electricity tariffs and implemented as target functions within an optimization problem. The cost-minimizing effect of household energy management is determined under these flexible tariffs, and the effects of the tariff designs on energy consumption and the induced costs are evaluated. Additionally, the results of the flexible tariff approach are compared with results from a centralized optimization by a virtual power plant. It is possible to develop a design for a suitable flexible tariff that decreases the energy procurement costs of electric vehicles while simultaneously reducing peak demand in comparison to a single real-time pricing incentive. Furthermore, this thesis shows that certain kinds of electricity tariff design do not only fail to support but actually

  19. 75 FR 49945 - In the Matter of Certain Hybrid Electric Vehicles and Components Thereof; Notice of Commission...

    Science.gov (United States)

    2010-08-16

    ... Toyota hybrid vehicles of claims of U.S. Patent No. 5,343,970. On July 19, 2010, Paice and Toyota moved... INTERNATIONAL TRADE COMMISSION [ Inv. No. 337-TA-688] In the Matter of Certain Hybrid Electric Vehicles and Components Thereof; Notice of Commission Determination Not To Review an Initial Determination...

  20. Engineering modelling. A contribution to the CommonKADS library

    Energy Technology Data Exchange (ETDEWEB)

    Top, J.L.; Akkermans, J.M.

    1993-12-01

    Generic knowledge components and models for the task of in particular engineering modelling are presented.It is intended as a contribution to the CommonKADS library. In the first chapter an executive summary is provided. Next, the Conceptual Modelling Language (CML) definitions of the various generic library components are given. In the following two chapters the underlying theory is developed. First, a task-oriented analysis is made, based upon the similarities between modelling and design tasks. Second, an ontological analysis is given, which shows that ontology differentiation constitutes an important problem-solving method (PSM) for engineering modelling, on a par with task-decomposition PSMs. Finally, three different modelling applications, based on existing knowledgeable systems, are analyzed, which analysis illustrates and provides data points for the discussed generic components and models for modelling. 50 figs., 77 refs.

  1. Landlab: an Open-Source Python Library for Modeling Earth Surface Dynamics

    Science.gov (United States)

    Gasparini, N. M.; Adams, J. M.; Hobley, D. E. J.; Hutton, E.; Nudurupati, S. S.; Istanbulluoglu, E.; Tucker, G. E.

    2016-12-01

    Landlab is an open-source Python modeling library that enables users to easily build unique models to explore earth surface dynamics. The Landlab library provides a number of tools and functionalities that are common to many earth surface models, thus eliminating the need for a user to recode fundamental model elements each time she explores a new problem. For example, Landlab provides a gridding engine so that a user can build a uniform or nonuniform grid in one line of code. The library has tools for setting boundary conditions, adding data to a grid, and performing basic operations on the data, such as calculating gradients and curvature. The library also includes a number of process components, which are numerical implementations of physical processes. To create a model, a user creates a grid and couples together process components that act on grid variables. The current library has components for modeling a diverse range of processes, from overland flow generation to bedrock river incision, from soil wetting and drying to vegetation growth, succession and death. The code is freely available for download (https://github.com/landlab/landlab) or can be installed as a Python package. Landlab models can also be built and run on Hydroshare (www.hydroshare.org), an online collaborative environment for sharing hydrologic data, models, and code. Tutorials illustrating a wide range of Landlab capabilities such as building a grid, setting boundary conditions, reading in data, plotting, using components and building models are also available (https://github.com/landlab/tutorials). The code is also comprehensively documented both online and natively in Python. In this presentation, we illustrate the diverse capabilities of Landlab. We highlight existing functionality by illustrating outcomes from a range of models built with Landlab - including applications that explore landscape evolution and ecohydrology. Finally, we describe the range of resources available for new

  2. Selective extraction of intracellular components from the microalga Chlorella vulgaris by combined pulsed electric field-temperature treatment

    NARCIS (Netherlands)

    Postma, P.R.; Pataro, G.; Capitoli, M.; Barbosa, M.J.; Wijffels, R.H.; Eppink, M.H.M.; Olivieri, G.; Ferrari, G.

    2016-01-01

    The synergistic effect of temperature (25-65°C) and total specific energy input (0.55-1.11kWhkgDW -1) by pulsed electric field (PEF) on the release of intracellular components from the microalgae Chlorella vulgaris was studied. The combination of PEF with temperatures from

  3. Libraries for users services in academic libraries

    CERN Document Server

    Alvite, Luisa

    2010-01-01

    This book reviews the quality and evolution of academic library services. It revises service trends offered by academic libraries and the challenge of enhancing traditional ones such as: catalogues, repositories and digital collections, learning resources centres, virtual reference services, information literacy and 2.0 tools.studies the role of the university library in the new educational environment of higher educationrethinks libraries in academic contextredefines roles for academic libraries

  4. Near-term hybrid vehicle program, phase 1. Appendix B: Design trade-off studies. [various hybrid/electric power train configurations and electrical and mechanical drive-line components

    Science.gov (United States)

    1979-01-01

    The relative attractiveness of various hybrid/electric power train configurations and electrical and mechanical drive-line components was studied. The initial screening was concerned primarily with total vehicle weight and economic factors and identified the hybrid power train combinations which warranted detailed evaluation over various driving cycles. This was done using a second-by-second vehicle simulation program which permitted the calculations of fuel economy, electricity usage, and emissions as a function of distance traveled in urban and highway driving. Power train arrangement possibilities were examined in terms of their effect on vehicle handling, safety, serviceability, and passenger comfort. A dc electric drive system utilizing a separately excited motor with field control and battery switching was selected for the near term hybrid vehicle. Hybrid vehicle simulations showed that for the first 30 mi (the electric range of the vehicle) in urban driving, the fuel economy was 80 mpg using a gasoline engine and 100 mpg using a diesel engine. In urban driving the hybrid would save about 75% of the fuel used by the conventional vehicle and in combined urban/highway driving the fuel saving is about 50%.

  5. SCHOOL COMMUNITY PERCEPTION OF LIBRARY APPS AGAINTS LIBRARY EMPOWERMENT

    Directory of Open Access Journals (Sweden)

    Achmad Riyadi Alberto

    2017-07-01

    Full Text Available Abstract. This research is motivated by the development of information and communication technology (ICT in the library world so rapidly that allows libraries in the present to develop its services into digital-based services. This study aims to find out the school community’s perception of library apps developed by Riche Cynthia Johan, Hana Silvana, and Holin Sulistyo and its influence on library empowerment at the library of SD Laboratorium Percontohan UPI Bandung. Library apps in this research belong to the context of m-libraries, which is a library that meets the needs of its users by using mobile platforms such as smartphones,computers, and other mobile devices. Empowerment of library is the utilization of all aspects of the implementation of libraries to the best in order to achieve the expected goals. An analysis of the schoolcommunity’s perception of library apps using the Technology Acceptance Model (TAM includes: ease of use, usefulness, usability, usage trends, and real-use conditions. While the empowerment of the library includes aspects: information empowerment, empowerment of learning resources, empowerment of human resources, empowerment of library facilities, and library promotion. The research method used in this research is descriptive method with quantitative approach. Population and sample in this research is school community at SD Laboratorium Percontohan UPI Bandung. Determination of sample criteria by using disproportionate stratified random sampling with the number of samples of 83 respondents. Data analysis using simple linear regression to measure the influence of school community perception about library apps to library empowerment. The result of data analysis shows that there is influence between school community perception about library apps to library empowerment at library of SD Laboratorium Percontohan UPI Bandung which is proved by library acceptance level and library empowerment improvement.

  6. DESIGNING OF ELECTRONIC LIBRARIES SYSTEM OF SCIENTIFIC AND EDUCATIONAL INSTITUTIONS OF APS OF UKRAINE

    Directory of Open Access Journals (Sweden)

    Oleg M. Spirin

    2010-08-01

    Full Text Available In the article the concept of electronic library is considered, preconditions of its designing for the institutions of APS of Ukraine are investigated. The basic components, base services of electronic library and kinds of corresponding resources are defined. It is proved typical decisions for working out of electronic scientifically-educational library of APS of Ukraine.

  7. Adquisición de publicaciones electrónicas en consorcios de bibliotecas Acquisition of electronic journals in libraries consortia

    Directory of Open Access Journals (Sweden)

    Silvia Contardi

    2004-12-01

    Full Text Available El incremento en los precios de las suscripciones a publicaciones periódicas en los últimos años, motivó el hecho de que las bibliotecas universitarias intentaran solucionar este problema, uniéndose y formando consorcios de bibliotecas, dónde, además de cooperar, compartir y facilitar el acceso a la información, se logra disminuir los costos de adquisición de las revistas científicas internacionales, permitiendo así, continuar apoyando las actividades de educación e investigación. Se destacan las distintas condiciones relacionadas con la compra en consorcios: características, ventajas, desventajas, licencias y modelos de precios. Se evalúa además la experiencia de tres consorcios, en Australia, Grecia y Brasil, que se basaron en este sistema cooperativo para adquirir sus revistas electrónicas.Because of the dramatic increment in journal subscriptions prices during the last few years, Academic libraries solved this problem by joining and creating library consortia, where, besides cooperation, sharing and access information facilities, they managed to decrease the acquisition costs of international scientific journals, allowing to continue supporting education and research activities. activities. Details of different conditions related to consortia purchase are highlighted: characteristics, advantages, disadvantages, licences and pricing models. It also evaluates experience of consortia from Australia, Greece and Brazil, which are based on this cooperation system to acquire their e-journals.

  8. A reliable computational workflow for the selection of optimal screening libraries.

    Science.gov (United States)

    Gilad, Yocheved; Nadassy, Katalin; Senderowitz, Hanoch

    2015-01-01

    components, it can be easily adapted and reproduced by computational groups interested in rational selection of screening libraries. Furthermore, the workflow could be readily modified to include additional components. This workflow has been routinely used in our laboratory for the selection of libraries in multiple projects and consistently selects libraries which are well balanced across multiple parameters.Graphical abstract.

  9. Semiclassical pair production rate for time-dependent electrical fields with more than one component: WKB-approach and world-line instantons

    Energy Technology Data Exchange (ETDEWEB)

    Strobel, Eckhard, E-mail: eckhard.strobel@irap-phd.eu [ICRANet, Piazzale della Repubblica 10, 65122 Pescara (Italy); Dipartimento di Fisica, Università di Roma “La Sapienza”, Piazzale Aldo Moro 5, 00185 Rome (Italy); Université de Nice Sophia Antipolis, 28 Avenue de Valrose, 06103 Nice Cedex 2 (France); Xue, She-Sheng, E-mail: xue@icra.it [ICRANet, Piazzale della Repubblica 10, 65122 Pescara (Italy); Dipartimento di Fisica, Università di Roma “La Sapienza”, Piazzale Aldo Moro 5, 00185 Rome (Italy)

    2014-09-15

    We present an analytic calculation of the semiclassical electron–positron pair creation rate by time-dependent electrical fields. We use two methods, first the imaginary time method in the WKB-approximation and second the world-line instanton approach. The analytic tools for both methods are generalized to time-dependent electric fields with more than one component. For the WKB method an expansion of the momentum spectrum of produced pairs around the canonical momentum P{sup →}=0 is presented which simplifies the computation of the pair creation rate. We argue that the world-line instanton method of [1] implicitly performs this expansion of the momentum spectrum around P{sup →}=0. Accordingly, the generalization to more than one component is shown to agree with the WKB result obtained via this expansion. However the expansion is only a good approximation for the cases where the momentum spectrum is peaked around P{sup →}=0. Thus the expanded WKB result and the world-line instanton method of [1] as well as the generalized method presented here are only applicable in these cases. We study the two-component case of a rotating electric field and find a new analytic closed form for the momentum spectrum using the generalized WKB method. The momentum spectrum for this field is not peaked around P{sup →}=0.

  10. A Comprehensive Study of Key Electric Vehicle (EV Components, Technologies, Challenges, Impacts, and Future Direction of Development

    Directory of Open Access Journals (Sweden)

    Fuad Un-Noor

    2017-08-01

    Full Text Available Electric vehicles (EV, including Battery Electric Vehicle (BEV, Hybrid Electric Vehicle (HEV, Plug-in Hybrid Electric Vehicle (PHEV, Fuel Cell Electric Vehicle (FCEV, are becoming more commonplace in the transportation sector in recent times. As the present trend suggests, this mode of transport is likely to replace internal combustion engine (ICE vehicles in the near future. Each of the main EV components has a number of technologies that are currently in use or can become prominent in the future. EVs can cause significant impacts on the environment, power system, and other related sectors. The present power system could face huge instabilities with enough EV penetration, but with proper management and coordination, EVs can be turned into a major contributor to the successful implementation of the smart grid concept. There are possibilities of immense environmental benefits as well, as the EVs can extensively reduce the greenhouse gas emissions produced by the transportation sector. However, there are some major obstacles for EVs to overcome before totally replacing ICE vehicles. This paper is focused on reviewing all the useful data available on EV configurations, battery energy sources, electrical machines, charging techniques, optimization techniques, impacts, trends, and possible directions of future developments. Its objective is to provide an overall picture of the current EV technology and ways of future development to assist in future researches in this sector.

  11. (ICT) to Technical Services in Libraries

    African Journals Online (AJOL)

    The term technical services is used in this paper to refer to the major operations that are common to all Technical Services Divisions in libraries – namely, cataloguing, classification, indexing and abstracting. These activities have many repetitive components which used to be done manually. But today the new technology ...

  12. Hyperspectral imaging of polymer banknotes for building and analysis of spectral library

    Science.gov (United States)

    Lim, Hoong-Ta; Murukeshan, Vadakke Matham

    2017-11-01

    The use of counterfeit banknotes increases crime rates and cripples the economy. New countermeasures are required to stop counterfeiters who use advancing technologies with criminal intent. Many countries started adopting polymer banknotes to replace paper notes, as polymer notes are more durable and have better quality. The research on authenticating such banknotes is of much interest to the forensic investigators. Hyperspectral imaging can be employed to build a spectral library of polymer notes, which can then be used for classification to authenticate these notes. This is however not widely reported and has become a research interest in forensic identification. This paper focuses on the use of hyperspectral imaging on polymer notes to build spectral libraries, using a pushbroom hyperspectral imager which has been previously reported. As an initial study, a spectral library will be built from three arbitrarily chosen regions of interest of five circulated genuine polymer notes. Principal component analysis is used for dimension reduction and to convert the information in the spectral library to principal components. A 99% confidence ellipse is formed around the cluster of principal component scores of each class and then used as classification criteria. The potential of the adopted methodology is demonstrated by the classification of the imaged regions as training samples.

  13. Renewable Electricity Futures (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Mai, T.

    2012-08-01

    This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented at the 2012 RE AMP Annual Meeting. RE-AMP is an active network of 144 nonprofits and foundations across eight Midwestern states working on climate change and energy policy with the goal of reducing global warming pollution economy-wide 80% by 2050.

  14. Examination of the Nexus between Academic Libraries and Accreditation: Lessons from Nigeria

    Science.gov (United States)

    Nkiko, Christopher; Ilo, Promise; Idiegbeyan-Ose, Jerome; Segun-Adeniran, Chidi

    2015-01-01

    The article investigated the nexus between academic libraries and accreditation in the higher institutions with special focus on the Nigerian experience. It showed that all accreditation agencies place a high premium on library provisions as a major component of requisite benchmarks in determining the status of the program or institutions being…

  15. Futuring, Strategic Planning and Shared Awareness: An Ohio University Libraries' Case Study

    Science.gov (United States)

    Staley, David J.; Seaman, Scott; Theodore-Shusta, Eileen

    2012-01-01

    A critical component of strategic planning is creating a shared-awareness among library staff of the potential societal, political, economic and technological changes that will influence how future users will create and consume scholarly materials, what will be expected of library services, and how facilities will be used. The ACRL Futuring…

  16. Welcome to the National Wetlands Research Center Library: Not Just Another Library-A Special Library

    Science.gov (United States)

    Broussard, Linda

    2007-01-01

    Libraries are grouped into four major types: public, school, academic, and special. The U.S. Geological Survey's (USGS) National Wetlands Research Center (NWRC) library is classified as a special library because it is sponsored by the Federal government, and the collections focus on a specific subject. The NWRC library is the only USGS library dedicated to wetland science. Library personnel offer expert research services to meet the informational needs of NWRC scientists, managers, and support personnel. The NWRC library participates in international cataloging and resource sharing, which allows libraries from throughout the world to borrow from its collections. This sharing facilitates the research of other governmental agencies, universities, and those interested in the study of wetlands.

  17. Library Catalog Log Analysis in E-Book Patron-Driven Acquisitions (PDA): A Case Study

    Science.gov (United States)

    Urbano, Cristóbal; Zhang, Yin; Downey, Kay; Klingler, Thomas

    2015-01-01

    Patron-Driven Acquisitions (PDA) is a new model used for e-book acquisition by academic libraries. A key component of this model is to make records of ebooks available in a library catalog and let actual patron usage decide whether or not an item is purchased. However, there has been a lack of research examining the role of the library catalog as…

  18. Reference neutron activation library

    International Nuclear Information System (INIS)

    2002-04-01

    Many scientific endeavors require accurate nuclear data. Examples include studies of environmental protection connected with the running of a nuclear installation, the conceptual designs of fusion energy producing devices, astrophysics and the production of medical isotopes. In response to this need, many national and international data libraries have evolved over the years. Initially nuclear data work concentrated on materials relevant to the commercial power industry which is based on the fission of actinides, but recently the topic of activation has become of increasing importance. Activation of materials occurs in fission devices, but is generally overshadowed by the primary fission process. In fusion devices, high energy (14 MeV) neutrons produced in the D-T fusion reaction cause activation of the structure, and (with the exception of the tritium fuel) is the dominant source of activity. Astrophysics requires cross-sections (generally describing neutron capture) or its studies of nucleosynthesis. Many analytical techniques require activation analysis. For example, borehole logging uses the detection of gamma rays from irradiated materials to determine the various components of rocks. To provide data for these applications, various specialized data libraries have been produced. The most comprehensive of these have been developed for fusion studies, since it has been appreciated that impurities are of the greatest importance in determining the overall activity, and thus data on all elements are required. These libraries contain information on a wide range of reactions: (n,γ), (n,2n), (n,α), (n,p), (n,d), (n,t), (n, 3 He)and (n,n')over the energy range from 10 -5 eV to 15 or 20 MeV. It should be noted that the production of various isomeric states have to be treated in detail in these libraries,and that the range of targets must include long-lived radioactive nuclides in addition to stable nuclides. These comprehensive libraries thus contain almost all the

  19. Reference neutron activation library

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-04-01

    Many scientific endeavors require accurate nuclear data. Examples include studies of environmental protection connected with the running of a nuclear installation, the conceptual designs of fusion energy producing devices, astrophysics and the production of medical isotopes. In response to this need, many national and international data libraries have evolved over the years. Initially nuclear data work concentrated on materials relevant to the commercial power industry which is based on the fission of actinides, but recently the topic of activation has become of increasing importance. Activation of materials occurs in fission devices, but is generally overshadowed by the primary fission process. In fusion devices, high energy (14 MeV) neutrons produced in the D-T fusion reaction cause activation of the structure, and (with the exception of the tritium fuel) is the dominant source of activity. Astrophysics requires cross-sections (generally describing neutron capture) or its studies of nucleosynthesis. Many analytical techniques require activation analysis. For example, borehole logging uses the detection of gamma rays from irradiated materials to determine the various components of rocks. To provide data for these applications, various specialized data libraries have been produced. The most comprehensive of these have been developed for fusion studies, since it has been appreciated that impurities are of the greatest importance in determining the overall activity, and thus data on all elements are required. These libraries contain information on a wide range of reactions: (n,{gamma}), (n,2n), (n,{alpha}), (n,p), (n,d), (n,t), (n,{sup 3}He)and (n,n')over the energy range from 10{sup -5} eV to 15 or 20 MeV. It should be noted that the production of various isomeric states have to be treated in detail in these libraries,and that the range of targets must include long-lived radioactive nuclides in addition to stable nuclides. These comprehensive libraries thus contain

  20. Assessing Library Automation and Virtual Library Development in Four Academic Libraries in Oyo, Oyo State, Nigeria

    Science.gov (United States)

    Gbadamosi, Belau Olatunde

    2011-01-01

    The paper examines the level of library automation and virtual library development in four academic libraries. A validated questionnaire was used to capture the responses from academic librarians of the libraries under study. The paper discovers that none of the four academic libraries is fully automated. The libraries make use of librarians with…

  1. Will Undergraduate Students Play Games to Learn How to Conduct Library Research?

    Science.gov (United States)

    Markey, Karen; Swanson, Fritz; Jenkins, Andrea; Jennings, Brian; St. Jean, Beth; Rosenberg, Victor; Yao, Xingxing; Frost, Robert

    2009-01-01

    This exploratory study examines whether undergraduate students will play games to learn how to conduct library research. Results indicate that students will play games that are an integral component of the course curriculum and enable them to accomplish overall course goals at the same time they learn about library research. (Contains 1 table.)

  2. MARKETING LIBRARY SERVICES IN ACADEMIC LIBRARIES: A ...

    African Journals Online (AJOL)

    MARKETING LIBRARY SERVICES IN ACADEMIC LIBRARIES: A TOOL FOR SURVIVAL IN THE ... This article discusses the concept of marketing library and information services as an ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  3. Content and Design Features of Academic Health Sciences Libraries' Home Pages.

    Science.gov (United States)

    McConnaughy, Rozalynd P; Wilson, Steven P

    2018-01-01

    The goal of this content analysis was to identify commonly used content and design features of academic health sciences library home pages. After developing a checklist, data were collected from 135 academic health sciences library home pages. The core components of these library home pages included a contact phone number, a contact email address, an Ask-a-Librarian feature, the physical address listed, a feedback/suggestions link, subject guides, a discovery tool or database-specific search box, multimedia, social media, a site search option, a responsive web design, and a copyright year or update date.

  4. Libraries and Accessibility: Istanbul Public Libraries Case

    Directory of Open Access Journals (Sweden)

    Gül Yücel

    2016-12-01

    Full Text Available In the study; the assessment of accessibility has been conducted in Istanbul public libraries within the scope of public area. Public libraries commonly serve with its user of more than 20 million in total, spread to the general of Turkey, having more than one thousand branches in the centrums and having more than one million registered members. The building principles and standards covering the subjects such as the selection of place, historical and architectural specification of the region, distance to the centre of population and design in a way that the disabled people could benefit from the library services fully have been determined with regulations in the construction of new libraries. There are works for the existent libraries such as access for the disabled, fire safety precautions etc. within the scope of the related standards. Easy access by everyone is prioritized in the public libraries having a significant role in life-long learning. The purpose of the study is to develop solution suggestions for the accessibility problems in the public libraries. The study based on the eye inspection and assessments carried out within the scope of accessibility in the public libraries subsidiary to Istanbul Culture and Tourism Provincial Directorate Library and Publications Department within the provincial borders of Istanbul. The arrangements such as reading halls, study areas, book shelves etc. have been examined within the frame of accessible building standards. Building entrances, ramps and staircases, horizontal and vertical circulation of building etc. have been taken into consideration within the scope of accessible building standards. The subjects such as the reading and studying areas and book shelf arrangements for the library have been assessed within the scope of specific buildings. There are a total of 34 public libraries subsidiary to Istanbul Culture and Tourism Provincial Directorate on condition that 20 ea. of them are in the

  5. The MainSTREAM Component Platform: A Holistic Approach to Microfluidic System Design

    DEFF Research Database (Denmark)

    Sabourin, David; Skafte-Pedersen, Peder; Søe, Martin Jensen

    2013-01-01

    A microfluidic component library for building systems driving parallel or serial microfluidic-based assays is presented. The components are a miniaturized eight-channel peristaltic pump, an eight-channel valve, sample-to-waste liquid management, and interconnections. The library of components...... of reaction chips; (2) highly parallel pumping and routing/valving capability; (3) methods to interface pumps and chip-to-liquid management systems; (4) means to construct a portable system; (5) reconfigurability/flexibility in system design; (6) means to interface to microscopes; and (7) compatibility...

  6. Graphic Design in Libraries: A Conceptual Process

    Science.gov (United States)

    Ruiz, Miguel

    2014-01-01

    Providing successful library services requires efficient and effective communication with users; therefore, it is important that content creators who develop visual materials understand key components of design and, specifically, develop a holistic graphic design process. Graphic design, as a form of visual communication, is the process of…

  7. Application of expert system in library and information science: a review

    International Nuclear Information System (INIS)

    Bhatti, A.R.

    1988-09-01

    This study seeks to provide an overview of the current state of development in the application of expert system in technology in the field of library and information science. The study starts briefly looking into the capabilities of Artificial Intelligence (AI) in general and then its relevance to LIS (Library Information System) work. A basic introduction to expert system technology and outgrowth of AI research is given. The major components of a generalized expert system are discussed in some detail, and the ways in which system development can be approached are looked at. The main area of expert system applications in library and information science are discussed, looking at cataloguing, classification, reference work and library management etc. (author)

  8. Public libraries in the library regions in the year 2009

    Directory of Open Access Journals (Sweden)

    Milena Bon

    2011-01-01

    Full Text Available Purpose: Regional public libraries were initiated in 2003 to connect professional activities of libraries within regional networks and to ensure coordinated library development in a region in cooperation with the Library System Development Centre at the National and University Library performing a coordinating role. The article analyses the performance of public libraries and their integration in regional library networks in order to find out the level of development of conditions of performance of public libraries.Methodology/approach: Statistical data for the year 2009 were the basis for the overview of library activities of ten library regions with regard to applicable legislation and library standards. The level of regional library activities is compared to the socio-economic situation of statistical regions thus representing a new approach to the presentation of Slovenian’s public libraries’ development.Results: Absolute values indicate better development of nine libraries in the central Slovenia region while relative values offer a totally different picture. Four libraries in the region of Nova Gorica prove the highest level of development.Research limitation: Research is limited to the year 2009 and basic statistical analysis.Originality/practical implications: Findings of the analysis are useful for public libraries to plan their development strategy within a region and for financial bodies to provide for adequate financing for library activities in a specific region. The basic condition for successful public library performance is the even and harmonized development of conditions of performance as recommended by library standards.

  9. Electric emissions from electrical appliances

    International Nuclear Information System (INIS)

    Leitgeb, N.; Cech, R.; Schroettner, J.

    2008-01-01

    Electric emissions from electric appliances are frequently considered negligible, and standards consider electric appliances to comply without testing. By investigating 122 household devices of 63 different categories, it could be shown that emitted electric field levels do not justify general disregard. Electric reference values can be exceeded up to 11-fold. By numerical dosimetry with homogeneous human models, induced intra-corporal electric current densities were determined and factors calculated to elevate reference levels to accounting for reduced induction efficiency of inhomogeneous fields. These factors were found not high enough to allow generally concluding on compliance with basic restrictions without testing. Electric appliances usually simultaneously emit both electric and magnetic fields exposing almost the same body region. Since the sum of induced current densities is limited, one field component reduces the available margin for the other. Therefore, superposition of electric current densities induced by either field would merit consideration. (authors)

  10. Dynamic modeling and simulation of an induction motor with adaptive backstepping design of an input-output feedback linearization controller in series hybrid electric vehicle

    Directory of Open Access Journals (Sweden)

    Jalalifar Mehran

    2007-01-01

    Full Text Available In this paper using adaptive backstepping approach an adaptive rotor flux observer which provides stator and rotor resistances estimation simultaneously for induction motor used in series hybrid electric vehicle is proposed. The controller of induction motor (IM is designed based on input-output feedback linearization technique. Combining this controller with adaptive backstepping observer the system is robust against rotor and stator resistances uncertainties. In additional, mechanical components of a hybrid electric vehicle are called from the Advanced Vehicle Simulator Software Library and then linked with the electric motor. Finally, a typical series hybrid electric vehicle is modeled and investigated. Various tests, such as acceleration traversing ramp, and fuel consumption and emission are performed on the proposed model of a series hybrid vehicle. Computer simulation results obtained, confirm the validity and performance of the proposed IM control approach using for series hybrid electric vehicle.

  11. DICOM implementation on online tape library storage system

    Science.gov (United States)

    Komo, Darmadi; Dai, Hailei L.; Elghammer, David; Levine, Betty A.; Mun, Seong K.

    1998-07-01

    The main purpose of this project is to implement a Digital Image and Communications (DICOM) compliant online tape library system over the Internet. Once finished, the system will be used to store medical exams generated from U.S. ARMY Mobile ARMY Surgical Hospital (MASH) in Tuzla, Bosnia. A modified UC Davis implementation of DICOM storage class is used for this project. DICOM storage class user and provider are implemented as the system's interface to the Internet. The DICOM software provides flexible configuration options such as types of modalities and trusted remote DICOM hosts. Metadata is extracted from each exam and indexed in a relational database for query and retrieve purposes. The medical images are stored inside the Wolfcreek-9360 tape library system from StorageTek Corporation. The tape library system has nearline access to more than 1000 tapes. Each tape has a capacity of 800 megabytes making the total nearline tape access of around 1 terabyte. The tape library uses the Application Storage Manager (ASM) which provides cost-effective file management, storage, archival, and retrieval services. ASM automatically and transparently copies files from expensive magnetic disk to less expensive nearline tape library, and restores the files back when they are needed. The ASM also provides a crash recovery tool, which enable an entire file system restore in a short time. A graphical user interface (GUI) function is used to view the contents of the storage systems. This GUI also allows user to retrieve the stored exams and send the exams to anywhere on the Internet using DICOM protocols. With the integration of different components of the system, we have implemented a high capacity online tape library storage system that is flexible and easy to use. Using tape as an alternative storage media as opposed to the magnetic disk has the great potential of cost savings in terms of dollars per megabyte of storage. As this system matures, the Hospital Information Systems

  12. Libraries Today, Libraries Tomorrow: Contemporary Library Practices and the Role of Library Space in the L

    Directory of Open Access Journals (Sweden)

    Ana Vogrinčič Čepič

    2013-09-01

    Full Text Available ABSTRACTPurpose: The article uses sociological concepts in order to rethink the changes in library practices. Contemporary trends are discussed with regard to the changing nature of working habits, referring mostly to the new technology, and the (emergence of the third space phenomenon. The author does not regard libraries only as concrete public service institutions, but rather as complex cultural forms, taking in consideration wider social context with a stress on users’ practices in relation to space.Methodology/approach: The article is based on the (self- observation of the public library use, and on the (discourse analysis of internal library documents (i.e. annual reports and plans and secondary sociological literature. As such, the cultural form approach represents a classic method of sociology of culture.Results: The study of relevant material in combination with direct personal experiences reveals socio-structural causes for the change of users’ needs and habits, and points at the difficulty of spatial redefinition of libraries as well as at the power of the discourse.Research limitations: The article is limited to an observation of users’ practices in some of the public libraries in Ljubljana and examines only a small number of annual reports – the discoveries are then further debated from the sociological perspective.Originality/practical implications: The article offers sociological insight in the current issues of the library science and tries to suggest a wider explanation that could answer some of the challenges of the contemporary librarianship.

  13. National Libraries Section. General Research Libraries Division. Papers.

    Science.gov (United States)

    International Federation of Library Associations, The Hague (Netherlands).

    Papers on national library services and activities, which were presented at the 1983 International Federation of Library Associations (IFLA) conference, include: (1) "The National Library of China in its Gradual Application of Modern Technology," a discussion by Zhu Nan and Zhu Yan (China) of microform usage and library automation; (2)…

  14. Libraries as a venue for exciting education technology, both high tech and low

    Science.gov (United States)

    Harold, J. B.; Dusenbery, P.; Holland, A.

    2016-12-01

    Public libraries provide a broad range of possibilities for reaching diverse audiences with NASA and STEM related content and activities, from hands-on activities, to interactive kiosks incorporating science based games, simulations, and real-time data. NCIL/SSI has been developing STEM-based exhibits and program activities for public libraries since 2007, and is currently managing 7 national tours in partnership with the American Library Association and other organizations. Past and current exhibitions will reach over 100 libraries and an estimated 1.5 million patrons. In this paper we will discuss a range of findings from almost a decade of deploying both high and low tech STEM learning strategies into libraries, including usage and engagement by library patrons, and challenges (and solutions) for deploying technologically sophisticated components into libraries which may or may not have dedicated technical staff.

  15. Anaphe - OO libraries and tools for data analysis

    International Nuclear Information System (INIS)

    Couet, O.; Ferrero-Merlino, B.; Molnar, Z.; Moscicki, J.T.; Pfeiffer, A.; Sang, M.

    2001-01-01

    The Anaphe project is an ongoing effort to provide an Object Oriented software environment for data analysis in HENP experiments. A range of commercial and public domain libraries is used to cover basic functionalities; on top of these libraries a set of HENP-specific C++ class libraries for histogram management, fitting, plotting and ntuple-like data analysis has been developed. In order to comply with the user requirements for a command-line driven tool, the authors have chosen to use a scripting language (Python) as the front-end for a data analysis tool. The loose coupling provided by the consequent use of (AIDA compliant) Abstract Interfaces for each component in combination with the use of shared libraries for their implementation provides an easy integration of existing libraries into modern scripting languages thus allowing for rapid application development. This integration is simplified even further using a specialised toolkit (SWIG) to create 'shadow classes' for the Python language, which map the definitions of the Abstract Interfaces almost at a one-to-one level. The authors will give an overview of the architecture and design choices and will present the current status and future developments of the project

  16. Model, prediction, and experimental verification of composition and thickness in continuous spread thin film combinatorial libraries grown by pulsed laser deposition

    International Nuclear Information System (INIS)

    Bassim, N. D.; Schenck, P. K.; Otani, M.; Oguchi, H.

    2007-01-01

    Pulsed laser deposition was used to grow continuous spread thin film libraries of continuously varying composition as a function of position on a substrate. The thickness of each component that contributes to a library can be empirically modeled to a bimodal cosine power distribution. We deposited ternary continuous spread thin film libraries from Al 2 O 3 , HfO 2 , and Y 2 O 3 targets, at two different background pressures of O 2 : 1.3 and 13.3 Pa. Prior to library deposition, we deposited single component calibration films at both pressures in order to measure and fit the thickness distribution. Following the deposition and fitting of the single component films, we predict both the compositional coverage and the thickness of the libraries. Then, we map the thickness of the continuous spread libraries using spectroscopic reflectometry and measure the composition of the libraries as a function of position using mapping wavelength-dispersive spectrometry (WDS). We then compare the compositional coverage of the libraries and observe that compositional coverage is enhanced in the case of 13.3 Pa library. Our models demonstrate linear correlation coefficients of 0.98 for 1.3 Pa and 0.98 for 13.3 Pa with the WDS

  17. LIBRARY SKILL INSTRUCTION IN NIGERIAN ACADEMIC LIBRARIES

    African Journals Online (AJOL)

    DJFLEX

    www.globaljournalseries.com; Info@globaljournalseries.com. LIBRARY SKILL INSTRUCTION IN NIGERIAN ACADEMIC. LIBRARIES. P. C. AZIAGBA AND E. H. UZOEZI. (Received 10, September 2009; Revision Accepted 8, February 2010). ABSTRACT. This survey was undertaken to portray the level of library involvement ...

  18. New Dynamic Library of Reverse Osmosis Plants with Fault Simulation

    International Nuclear Information System (INIS)

    Luis, Palacin; Fernando, Tadeo; Cesar, de Prada; Elfil, Hamza

    2009-01-01

    This paper presents an update of a dynamic library of reverse osmosis plants (ROSIM). This library has been developed in order to be used for optimization, simulation, controller testing or fault detection strategies and a simple fault tolerant control is tested. ROSIM is based in a set of components representing the different units of a typical reverse osmosis plant (as sand filters, cartridge filters, exchanger energy recoveries, pumps, membranes, storage tanks, control systems, valves, etc.). Different types of fouling (calcium carbonate, iron hydroxide, biofouling) have been added and the mathematical model of the reverse osmosis membranes, proposed in the original library, has been improved.

  19. E-library Implementation in Library University of Riau

    Science.gov (United States)

    Yuhelmi; Rismayeti

    2017-12-01

    This research aims to see how the e-book implementation in Library University of Riau and the obstacle in its implementation. In the Globalization era, digital libraries should be developed or else it will decrease the readers’ interest, with the recent advanced technology, digital libraries are one of the learning tools that can be used to finding an information through the internet access, hence digital libraries or commonly known as E-Library is really helping the students and academic community in finding information. The methods that used in this research is Observation, Interview, and Literature Study. The respondents in this research are the staff who involved in the process of digitization in Library University of Riau. The result of this research shows that implementation of e-library in Library University of Riau is already filled the user needs for now, although there is obstacle faced just like technical problems for example the internet connection speed and the technical problem to convert the format from Microsoft Word .doc to Adobe.pdf

  20. The effects of aging on electrical and I ampersand C components: Results of US Nuclear Plant Aging Research

    International Nuclear Information System (INIS)

    Aggarwal, S.K.; Gunther, W.E.

    1993-01-01

    The US NRC's hardware oriented engineering research program for plant aging and degradation monitoring has achieved results in the area of electrical, control, and instrumentation (ECI) components used in nuclear power plants (NPPs). The principal goals of the program, known as the Nuclear Power Plant Aging Research (NPAR) Program, are to understand the effects of age-related degradation in NPPs and how to manage and mitigate them effectively. This paper describes how these goals have been achieved for key ECI components used in the safety systems of NPPs. The status of relevant on-going and planned research projects is also provided

  1. The effects of aging on electrical and I ampersand C components: Results of US nuclear plant aging research

    International Nuclear Information System (INIS)

    Aggarwal, S.K.; Gunther, W.E.

    1991-01-01

    The US NRC's hardware oriented engineering research program for plant aging and degradation monitoring has achieved results in the area of electrical, control, and instrumentation (ECI) components used in nuclear power plants (NPPs). The principal goals of the program, known as the Nuclear Power Plant Aging Research (NPAR) Program, are to understand the effects of age-related degradation in NPPs and how to manage and mitigate them effectively. This paper describes how these goals have been achieved for key ECI components used in the safety systems of NPPs. The status of relevant on-going and planned research projects is also provided

  2. The forming process of magnesium alloy for Japanese home electric components

    Energy Technology Data Exchange (ETDEWEB)

    Takara, A. [Matsushita Electric Industrial Co., Kadoma, Osaka (Japan); Higashi, K. [Osaka Prefecture Univ., Sakai, Osaka (Japan)

    2005-07-01

    Magnesium alloys have replaced resins as a material for the components of electronic products such as cell phone and notebook personal computer mainly, because of their lightness and rigidity. Thin walls, a complicated shape, and high appearance quality are all needed in the external parts. Die-casting and injection molding are the main method of manufacturing magnesium alloy parts. The optimal cast conditions and mold design have been investigated in order that a few defects such as surface cracks and mold cavities in casting parts would be reduced. Instead of cast, plastic forming technologies such as warm drawing and hot forging have been developed to form thinner walls and less defects. Plastic formability of magnesium alloy in hot working is dependent on a grain size of material. The material with fine grains has advantage of being formed at high strain rate. The characteristics of forming processes of magnesium parts for Japanese home electric appliances are compared in the viewpoint of quality, cost, and productivity. (orig.)

  3. Marketing library and information services in academic libraries in ...

    African Journals Online (AJOL)

    Marketing library and information services in academic libraries in Niger State, Nigeria. ... This study was designed to investigate the marketing of library services in academic libraries in Niger state, ... EMAIL FULL TEXT EMAIL FULL TEXT

  4. The Alsos library for nuclear issues

    International Nuclear Information System (INIS)

    Settle, F.A.; Whaley, T.; Blackmer, E.

    2005-01-01

    Full text: This presentation will describe the content and features of the Alsos Digital Library for Nuclear Issues (http://alsos.wlu.edu). The library, funded by the U.S. National Science Foundation, provides a broad, balanced collection of indexed, annotated references for the study of nuclear issues ranging from nuclear reactors to Japanese poetry. All annotations have been reviewed by members of the library's prestigious National Advisory Board. The searchable collection includes books, articles, films, CD-ROMs, and websites. It currently contains approximately 1600 references and receives over 15000 visits per month. The mission of the library is to make the history and current status of nuclear issues more accessible and comprehensible to the general public as well as to students, educators, and other professionals in the many fields influenced by the forces of the nuclear age. References may be accessed by conventional keyword, creator, and title searches or by browsing topics under one of five categories; issues, warfare, science, people, and places. Of particular interest to conference participants are topics in the issues category that include nuclear power, terrorism, and nuclear waste. The library can also provide bibliographies for specific topics which can be embedded as hyperlinks on other websites which address of nuclear issues. Finally the Alsos Library is the bibliographical component of Nuclear Pathways (nuclearpathways.org), a composite site which is attempting to integrate websites dedicated to nuclear issues. The initial partner sites are: Atomic Archive (http://atomicarchive.com), Nuclear Chemistry in the Community (http://www.chemcases.com/2003version/nuclear/index2.htm), and Nuclear Files (http://nuclearfiles.org). (author)

  5. Personal Virtual Libraries

    Science.gov (United States)

    Pappas, Marjorie L.

    2004-01-01

    Virtual libraries are becoming more and more common. Most states have a virtual library. A growing number of public libraries have a virtual presence on the Web. Virtual libraries are a growing addition to school library media collections. The next logical step would be personal virtual libraries. A personal virtual library (PVL) is a collection…

  6. America's Star Libraries

    Science.gov (United States)

    Lyons, Ray; Lance, Keith Curry

    2009-01-01

    "Library Journal"'s new national rating of public libraries, the "LJ" Index of Public Library Service, identifies 256 "star" libraries. It rates 7,115 public libraries. The top libraries in each group get five, four, or three Michelin guide-like stars. All included libraries, stars or not, can use their scores to learn from their peers and improve…

  7. Independent component analysis for cochlear implant artifacts attenuation from electrically evoked auditory steady-state response measurements

    Science.gov (United States)

    Deprez, Hanne; Gransier, Robin; Hofmann, Michael; van Wieringen, Astrid; Wouters, Jan; Moonen, Marc

    2018-02-01

    Objective. Electrically evoked auditory steady-state responses (EASSRs) are potentially useful for objective cochlear implant (CI) fitting and follow-up of the auditory maturation in infants and children with a CI. EASSRs are recorded in the electro-encephalogram (EEG) in response to electrical stimulation with continuous pulse trains, and are distorted by significant CI artifacts related to this electrical stimulation. The aim of this study is to evaluate a CI artifacts attenuation method based on independent component analysis (ICA) for three EASSR datasets. Approach. ICA has often been used to remove CI artifacts from the EEG to record transient auditory responses, such as cortical evoked auditory potentials. Independent components (ICs) corresponding to CI artifacts are then often manually identified. In this study, an ICA based CI artifacts attenuation method was developed and evaluated for EASSR measurements with varying CI artifacts and EASSR characteristics. Artifactual ICs were automatically identified based on their spectrum. Main results. For 40 Hz amplitude modulation (AM) stimulation at comfort level, in high SNR recordings, ICA succeeded in removing CI artifacts from all recording channels, without distorting the EASSR. For lower SNR recordings, with 40 Hz AM stimulation at lower levels, or 90 Hz AM stimulation, ICA either distorted the EASSR or could not remove all CI artifacts in most subjects, except for two of the seven subjects tested with low level 40 Hz AM stimulation. Noise levels were reduced after ICA was applied, and up to 29 ICs were rejected, suggesting poor ICA separation quality. Significance. We hypothesize that ICA is capable of separating CI artifacts and EASSR in case the contralateral hemisphere is EASSR dominated. For small EASSRs or large CI artifact amplitudes, ICA separation quality is insufficient to ensure complete CI artifacts attenuation without EASSR distortion.

  8. Digital libraries and World Wide Web sites and page persistence.

    Directory of Open Access Journals (Sweden)

    Wallace Koehler

    1999-01-01

    Full Text Available Web pages and Web sites, some argue, can either be collected as elements of digital or hybrid libraries, or, as others would have it, the WWW is itself a library. We begin with the assumption that Web pages and Web sites can be collected and categorized. The paper explores the proposition that the WWW constitutes a library. We conclude that the Web is not a digital library. However, its component parts can be aggregated and included as parts of digital library collections. These, in turn, can be incorporated into "hybrid libraries." These are libraries with both traditional and digital collections. Material on the Web can be organized and managed. Native documents can be collected in situ, disseminated, distributed, catalogueed, indexed, controlled, in traditional library fashion. The Web therefore is not a library, but material for library collections is selected from the Web. That said, the Web and its component parts are dynamic. Web documents undergo two kinds of change. The first type, the type addressed in this paper, is "persistence" or the existence or disappearance of Web pages and sites, or in a word the lifecycle of Web documents. "Intermittence" is a variant of persistence, and is defined as the disappearance but reappearance of Web documents. At any given time, about five percent of Web pages are intermittent, which is to say they are gone but will return. Over time a Web collection erodes. Based on a 120-week longitudinal study of a sample of Web documents, it appears that the half-life of a Web page is somewhat less than two years and the half-life of a Web site is somewhat more than two years. That is to say, an unweeded Web document collection created two years ago would contain the same number of URLs, but only half of those URLs point to content. The second type of change Web documents experience is change in Web page or Web site content. Again based on the Web document samples, very nearly all Web pages and sites undergo some

  9. Efficient library synthesis of imidazoles using a multicomponent reaction and microwave irradiation

    NARCIS (Netherlands)

    Gelens, E.; De Kanter, F.J.J.; Schmitz, R.F.; Sliedregt, L.A.; Van Steen, B.J.; Kruse, C.G.; Leurs, R.; Groen, M.B.; Orru, R.V.A.

    2006-01-01

    Optimization of Radziszewski's four-component reaction employing a microwave-assisted protocol, led to a small library of 48 imidazoles with a success rate of 65% (conversion >45%). All three diversity points of the four-component reaction were varied. Aromatic and aliphatic inputs were successfully

  10. More library mashups exploring new ways to deliver library data

    CERN Document Server

    2015-01-01

    Nicole Engard follows up her ground-breaking 2009 book Library Mashups with a fresh collection of mashup projects that virtually any library can emulate, customize, and build upon. In More Library Mashups, Engard and 24 creative library professionals describe how they are mashing up free and inexpensive digital tools and techniques to improve library services and meet everyday (and unexpected) challenges. Examples from libraries of all types are designed to help even non-programmers share and add value to digital content, update and enhance library websites and collections, mashup catalog data, connect to the library's automation system, and use emerging tools like Serendip-o-matic, Umlaut, and Libki to engage users, staff, and the community.

  11. Library Science Education: A New Role for Academic Libraries

    Science.gov (United States)

    Wesley, Threasa L.

    2018-01-01

    Many individuals working in library and information organizations do not hold a master of library science (MLS) degree or other specialized library science credential. Recognizing that this professional gap could be addressed by diversified educational opportunities, the W. Frank Steely Library at Northern Kentucky University in Highland Heights…

  12. USGS Spectral Library Version 7

    Science.gov (United States)

    Kokaly, Raymond F.; Clark, Roger N.; Swayze, Gregg A.; Livo, K. Eric; Hoefen, Todd M.; Pearson, Neil C.; Wise, Richard A.; Benzel, William M.; Lowers, Heather A.; Driscoll, Rhonda L.; Klein, Anna J.

    2017-04-10

    We have assembled a library of spectra measured with laboratory, field, and airborne spectrometers. The instruments used cover wavelengths from the ultraviolet to the far infrared (0.2 to 200 microns [μm]). Laboratory samples of specific minerals, plants, chemical compounds, and manmade materials were measured. In many cases, samples were purified, so that unique spectral features of a material can be related to its chemical structure. These spectro-chemical links are important for interpreting remotely sensed data collected in the field or from an aircraft or spacecraft. This library also contains physically constructed as well as mathematically computed mixtures. Four different spectrometer types were used to measure spectra in the library: (1) Beckman™ 5270 covering the spectral range 0.2 to 3 µm, (2) standard, high resolution (hi-res), and high-resolution Next Generation (hi-resNG) models of Analytical Spectral Devices (ASD) field portable spectrometers covering the range from 0.35 to 2.5 µm, (3) Nicolet™ Fourier Transform Infra-Red (FTIR) interferometer spectrometers covering the range from about 1.12 to 216 µm, and (4) the NASA Airborne Visible/Infra-Red Imaging Spectrometer AVIRIS, covering the range 0.37 to 2.5 µm. Measurements of rocks, soils, and natural mixtures of minerals were made in laboratory and field settings. Spectra of plant components and vegetation plots, comprising many plant types and species with varying backgrounds, are also in this library. Measurements by airborne spectrometers are included for forested vegetation plots, in which the trees are too tall for measurement by a field spectrometer. This report describes the instruments used, the organization of materials into chapters, metadata descriptions of spectra and samples, and possible artifacts in the spectral measurements. To facilitate greater application of the spectra, the library has also been convolved to selected spectrometer and imaging spectrometers sampling and

  13. Owl: A General-Purpose Numerical Library in OCaml

    OpenAIRE

    Wang, Liang

    2017-01-01

    Owl is a new numerical library developed in the OCaml language. It focuses on providing a comprehensive set of high-level numerical functions so that developers can quickly build up data analytical applications. In this abstract, we will present Owl's design, core components, and its key functionality.

  14. General Maister's Library in the University of Maribor Library: Gaining and Preservation of the General Maister's Private Library in the University of Maribor Library

    Directory of Open Access Journals (Sweden)

    Vlasta Stavbar

    2015-12-01

    Full Text Available Rudolf Maister’s book legacy, which is kept in the University of Maribor Library, is the complete legacy of the Maister’s private book collection– the “maistirana”. The Maister’s Library is in the University of Maribor Library possession since 1998, when General Maister’s heirs and the Library signed the deed of donation. 5.945 units of library materials present a special collection, which is divided from the regular library holdings and is kept in a specially designed room. General Maister’s Library is an exception in the University of Maribor Library, since the general practice of libraries is not an exclusive maintenance of the provenience principle and of the original organisation. Because the Maister’s Library consists of materials that are important when researching the Slovene literary and cultural past, it only seems reasonably to strive for the authentic organisation and preserving the library as one integral whole.In order to understand the meaning and the importance of this special library collection for the Slovene cultural heritage, we have to highlight Rudolf Maister as a passionate book lover and as the owner of one of the greatest and the most beautiful private libraries in Slovenia. General Maister started collecting books and organising his collection back in 1912 in Ljubljana; the collection was rearranged thoroughly during the time he was in Maribor; it survived the moves during World War II and after it and it finally found its place in the General Maister’s Library under the patronage of the University of Maribor Library. The rearranging of the shelving system and sorting of the materials patterned after the authentic shelving system in the General’s Maribor apartment took place in 2013. Until then the books were not arranged according to the authentic shelving system. The estimated shelving system reconstruction has reconstructed Maister’s shelving system as authentically as possible, for it is not

  15. Listening to Students: Customer Journey Mapping at Birmingham City University Library and Learning Resources

    Science.gov (United States)

    Andrews, Judith; Eade, Eleanor

    2013-01-01

    Birmingham City University's Library and Learning Resources' strategic aim is to improve student satisfaction. A key element is the achievement of the Customer Excellence Standard. An important component of the standard is the mapping of services to improve quality. Library and Learning Resources has developed a methodology to map these…

  16. Library usage patterns in the electronic information environment. Electronic journals, Use studies, Libraries, Medical libraries

    Directory of Open Access Journals (Sweden)

    B. Franklin

    2004-01-01

    Full Text Available This paper examines the methodology and results from Web-based surveys of more than 15,000 networked electronic services users in the United States between July 1998 and June 2003 at four academic health sciences libraries and two large main campus libraries serving a variety of disciplines. A statistically valid methodology for administering simultaneous Web-based and print-based surveys using the random moments sampling technique is discussed and implemented. Results from the Web-based surveys showed that at the four academic health sciences libraries, there were approximately four remote networked electronic services users for each in-house user. This ratio was even higher for faculty, staff, and research fellows at the academic health sciences libraries, where more than five remote users for each in-house user were recorded. At the two main libraries, there were approximately 1.3 remote users for each in-house user of electronic information. Sponsored research (grant funded research accounted for approximately 32% of the networked electronic services activity at the health sciences libraries and 16% at the main campus libraries. Sponsored researchers at the health sciences libraries appeared to use networked electronic services most intensively from on-campus, but not from in the library. The purpose of use for networked electronic resources by patrons within the library is different from the purpose of use of those resources by patrons using the resources remotely. The implications of these results on how librarians reach decisions about networked electronic resources and services are discussed.

  17. Library Subject Guides: A Case Study of Evidence-Informed Library Development

    Science.gov (United States)

    Wakeham, Maurice; Roberts, Angharad; Shelley, Jane; Wells, Paul

    2012-01-01

    This paper describes the process whereby a university library investigated the value of its subject guides to its users. A literature review and surveys of library staff, library users and other libraries were carried out. Existing library subject guides and those of other higher education libraries were evaluated. The project team reported…

  18. Library subject guides: A case study of evidence-informed library development

    OpenAIRE

    Wakeham, Maurice; Roberts, Angharad; Shelley, Jane; Wells, Paul

    2012-01-01

    This paper describes the process whereby a university library investigated the value of its subject guides to its users. A literature review and surveys of library staff, library users and other libraries were carried out. Existing library subject guides and those of other higher education libraries were evaluated. The project team reported regularly to the wider library team throughout the year long investigation and made recommendations. The project served to develop the professional skills...

  19. LEGO - A Class Library for Accelerator Design and Simulation

    International Nuclear Information System (INIS)

    Cai, Yunhai

    1998-01-01

    An object-oriented class library of accelerator design and simulation is designed and implemented in a simple and modular fashion. All physics of single-particle dynamics is implemented based on the Hamiltonian in the local frame of the component. Symplectic integrators are used to approximate the integration of the Hamiltonian. A differential algebra class is introduced to extract a Taylor map up to arbitrary order. Analysis of optics is done in the same way both for the linear and non-linear cases. Recently, Monte Carlo simulation of synchrotron radiation has been added into the library. The code is used to design and simulate the lattices of the PEP-II and SPEAR3. And it is also used for the commissioning of the PEP-II. Some examples of how to use the library will be given

  20. Challenges of ITER diagnostic electrical services

    Energy Technology Data Exchange (ETDEWEB)

    Encheva, A., E-mail: anna.encheva@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-Lez-Durance (France); Omran, H. [Oxford Technologies Ltd, 7 Nuffield Way, Abingdon OX14 1RL (United Kingdom); Pérez-Lasala, M. [The European Joint Undertaking for ITER and the Development of Fusion Energy, c/Josep Pla, n° 2, Torres Diagonal Litoral, Edificio B3, 08019 Barcelona (Spain); Alekseev, A. [Efremov Institute, Metallostroy, Doroga na Metallostroy, 3 bld., Saint-Petersburg 196641 (Russian Federation); Arshad, S. [The European Joint Undertaking for ITER and the Development of Fusion Energy, c/Josep Pla, n° 2, Torres Diagonal Litoral, Edificio B3, 08019 Barcelona (Spain); Bede, O. [Oxford Technologies Ltd, 7 Nuffield Way, Abingdon OX14 1RL (United Kingdom); Bender, S. [Efremov Institute, Metallostroy, Doroga na Metallostroy, 3 bld., Saint-Petersburg 196641 (Russian Federation); Bertalot, L.; Direz, M.-F.; Drevon, J.-M.; Jakhar, S.; Kaschuk, Y.; Komarov, V.; Lebarbier, R. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-Lez-Durance (France); Lucca, F. [L.T. Calcoli SaS, Piazza Prinetti 26/B, 23807 Merate (Italy); Macklin, B.; Maquet, P. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-Lez-Durance (France); Marin, A. [L.T. Calcoli SaS, Piazza Prinetti 26/B, 23807 Merate (Italy); Martin, A. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-Lez-Durance (France); Mills, S. [Oxford Technologies Ltd, 7 Nuffield Way, Abingdon OX14 1RL (United Kingdom); and others

    2013-10-15

    Highlights: • A brief description of all major components part of diagnostic electrical services has been given. • The integration challenges have been presented. • Design assumptions and requirements for the components have been described. • The design of the conduit/loom and the relevant analysis has been highlighted. -- Abstract: Diagnostic electrical services provide the electrical infrastructure to serve diagnostic components installed on the ITER tokamak. This infrastructure is composed of cables, connectors, cable tails, looms, conduits and feedthroughs. The diagnostic services offer as well a shelter for various instrumentations – vacuum vessel (VV), blanket and divertor. The diagnostic sensors are located on the inner and outer VV wall, on blanket shield modules, divertor cassettes and in port plugs. They require electrical cabling to extract the measurement and, in some cases, to supply electrical power to the sensors. These cables run from the sensors to feedthroughs on the VV and the port interspace or cryostat. The design and integration of all components that are part of diagnostic electrical services is an important engineering activity that is being challenged by the multiple requirements and constraints which have to be satisfied while at the same time delivering the required diagnostic performance. The positioning of the components must correlate not only with their functional specifications but also with the design of the major ITER components. This is a particular challenge because not all systems have reached the same level of design maturity. This paper outlines the engineering challenges of ITER diagnostics electrical services. The environmental conditions inside the VV will have an important impact. Leading risks to these components include poor electrical contact at connectors, the effects of exposure to nuclear irradiation, such as material transmutation, heating, and generation of spurious electrical signals etc., failure due to

  1. Modelica Library for Building Heating, Ventilation and Air-Conditioning Systems

    Energy Technology Data Exchange (ETDEWEB)

    Wetter, Michael

    2009-06-17

    This paper presents a freely available Modelica library for building heating, ventilation and air conditioning systems. The library is based on the Modelica.Fluid library. It has been developed to support research and development of integrated building energy and control systems. The primary applications are controls design, energy analysis and model-based operation. The library contains dynamic and steady-state component models that are applicable for analyzing fast transients when designing control algorithms and for conducting annual simulations when assessing energy performance. For most models, dimensional analysis is used to compute the performance for operating points that differ from nominal conditions. This allows parameterizing models in the absence of detailed geometrical information which is often impractical to obtain during the conceptual design phase of building systems. In the first part of this paper, the library architecture and the main classes are described. In the second part, an example is presented in which we implemented a model of a hydronic heating system with thermostatic radiator valves and thermal energy storage.

  2. Experimental Study of the Cooling of Electrical Components Using Water Film Evaporation

    Directory of Open Access Journals (Sweden)

    S. Harmand

    2012-01-01

    Full Text Available Heat and mass transfer, which occur in the evaporation of a falling film of water, are studied experimentally. This evaporation allows the dissipation of the heat flux produced by twelve resistors, which simulate electrical components on the back side of an aluminium plate. On the front side of the plate, a falling film of water flows by the action of gravity. An inverse heat conduction model, associated with a spatial regularisation, was developed and produces the local heat fluxes on the plate using the measured temperatures. The efficiency of this evaporative process has been studied with respect to several parameters: imposed heat flux, inlet mass flow rate, and geometry. A comparison of the latent and sensible fluxes used to dissipate the imposed heat flux was studied in the case of a plexiglass sheet in front of the falling film at different distances from the aluminium plate.

  3. Organic Contaminants Library for the Sample Analysis at Mars

    Science.gov (United States)

    Misra, P.; Garcia-Sanchez, R.; Canham, J.; Mahaffy, P. R.

    2012-12-01

    A library containing mass spectra for Sample Analysis at Mars (SAM) materials has been developed with the purpose of contamination identification and control. Based on analysis of the Gas Chromatography-Mass Spectrometric (GCMS) data through thermal desorption, organic compounds were successfully identified from material samples, such as polymers, paints and adhesives. The library contains the spectra for all the compounds found in each of these analyzed files and is supplemented by a file information spreadsheet, a spreadsheet-formatted library for easy searching, and a Perfluorotributylamine (PFTBA) based normalization protocol to make corrections to SAM data in order to meet the standard set by commercial libraries. An example of the library in use can be seen in Figure 1, where the abundances match closely, the spectral shape is retained, and the library picks up on it with an 88% identification probability. Of course, there are also compounds that have not been identified and are retained as unknowns. The library we have developed, along with its supplemental materials, is useful from both organizational and practical viewpoints. Through them we are able to organize large volumes of GCMS data, while at the same time breaking down the components that each material sample is made of. This approach in turn allows us straightforward and fast access to information that will be critical while performing analysis on the data recorded by the SAM instrumentation. In addition, the normalization protocol dramatically increased the identification probability. In SAM GCMS, PFTBA signals were obfuscated, resulting in library matches far away from PFTBA; by using the normalization protocol we were able to transform it into a 92% probable spectral match for PFTBA. The project has demonstrated conclusively that the library is successful in identifying unknown compounds utilizing both the Automated Mass Spectral Deconvolution & Identification System (AMDIS) and the Ion

  4. Language interoperability for high-performance parallel scientific components

    International Nuclear Information System (INIS)

    Elliot, N; Kohn, S; Smolinski, B

    1999-01-01

    With the increasing complexity and interdisciplinary nature of scientific applications, code reuse is becoming increasingly important in scientific computing. One method for facilitating code reuse is the use of components technologies, which have been used widely in industry. However, components have only recently worked their way into scientific computing. Language interoperability is an important underlying technology for these component architectures. In this paper, we present an approach to language interoperability for a high-performance parallel, component architecture being developed by the Common Component Architecture (CCA) group. Our approach is based on Interface Definition Language (IDL) techniques. We have developed a Scientific Interface Definition Language (SIDL), as well as bindings to C and Fortran. We have also developed a SIDL compiler and run-time library support for reference counting, reflection, object management, and exception handling (Babel). Results from using Babel to call a standard numerical solver library (written in C) from C and Fortran show that the cost of using Babel is minimal, where as the savings in development time and the benefits of object-oriented development support for C and Fortran far outweigh the costs

  5. The history and library statistics of JAEA library activities

    Energy Technology Data Exchange (ETDEWEB)

    Itabashi, Keizo [Japan Atomic Energy Agency, Intellectual Resources Dept., Tokai, Ibaraki (Japan)

    2012-03-15

    The history and library statistics of the Japan Atomic Energy Agency library activity were summarized. Former Japan Atomic Energy Research Institute and the former Japan Nuclear Cycle Development Institute merged in October, 2005, and Japan Atomic Energy Agency is established. Properly speaking, the library statistics of old two corporations should have been summarized, but statistics of the Japan Nuclear Cycle Development Institute is not yet obtained. Then, although it is stated as the Japan Atomic Energy Agency library, it limits to the description about the old Japan Atomic Energy Research Institute library before 2004. (author)

  6. The history and library statistics of JAEA library activities

    International Nuclear Information System (INIS)

    Itabashi, Keizo

    2012-03-01

    The history and library statistics of the Japan Atomic Energy Agency library activity were summarized. Former Japan Atomic Energy Research Institute and the former Japan Nuclear Cycle Development Institute merged in October, 2005, and Japan Atomic Energy Agency is established. Properly speaking, the library statistics of old two corporations should have been summarized, but statistics of the Japan Nuclear Cycle Development Institute is not yet obtained. Then, although it is stated as the Japan Atomic Energy Agency library, it limits to the description about the old Japan Atomic Energy Research Institute library before 2004. (author)

  7. Advanced electrical power system technology for the all electric aircraft

    Science.gov (United States)

    Finke, R. C.; Sundberg, G. R.

    1983-01-01

    The application of advanced electric power system technology to an all electric airplane results in an estimated reduction of the total takeoff gross weight of over 23,000 pounds for a large airplane. This will result in a 5 to 10 percent reduction in direct operating costs (DOC). Critical to this savings is the basic electrical power system component technology. These advanced electrical power components will provide a solid foundation for the materials, devices, circuits, and subsystems needed to satisfy the unique requirements of advanced all electric aircraft power systems. The program for the development of advanced electrical power component technology is described. The program is divided into five generic areas: semiconductor devices (transistors, thyristors, and diodes); conductors (materials and transmission lines); dielectrics; magnetic devices; and load management devices. Examples of progress in each of the five areas are discussed. Bipolar power transistors up to 1000 V at 100 A with a gain of 10 and a 0.5 microsec rise and fall time are presented. A class of semiconductor devices with a possibility of switching up to 100 kV is described. Solid state power controllers for load management at 120 to 1000 V and power levels to 25 kW were developed along with a 25 kW, 20 kHz transformer weighing only 3.2 kg. Previously announced in STAR as N83-24764

  8. Advanced electrical power system technology for the all electric aircraft

    Science.gov (United States)

    Finke, R. C.; Sundberg, G. R.

    1983-01-01

    The application of advanced electric power system technology to an all electric airplane results in an estimated reduction of the total takeoff gross weight of over 23,000 pounds for a large airplane. This will result in a 5 to 10 percent reduction in direct operating costs (DOC). Critical to this savings is the basic electrical power system component technology. These advanced electrical power components will provide a solid foundation for the materials, devices, circuits, and subsystems needed to satisfy the unique requirements of advanced all electric aircraft power systems. The program for the development of advanced electrical power component technology is described. The program is divided into five generic areas: semiconductor devices (transistors, thyristors, and diodes); conductors (materials and transmission lines); dielectrics; magnetic devices; and load management devices. Examples of progress in each of the five areas are discussed. Bipolar power transistors up to 1000 V at 100 A with a gain of 10 and a 0.5 microsec rise and fall time are presented. A class of semiconductor devices with a possibility of switching up to 100 kV is described. Solid state power controllers for load management at 120 to 1000 V and power levels to 25 kW were developed along with a 25 kW, 20 kHz transformer weighing only 3.2 kg.

  9. Wikis in Libraries

    Directory of Open Access Journals (Sweden)

    Matthew Bejune

    2007-09-01

    Full Text Available Wikis have recently been adopted to support a variety of collaborative activities within libraries. This article and its companion wiki, LibraryWikis (http://librarywikis.pbwiki.com/, seek to document the phenomenon of wikis in libraries. This subject is considered within the framework of computer-supported cooperative work (CSCW. The author identified thirty-three library wikis and developed a classification schema with four categories: (1 collaboration among libraries (45.7 percent; (2 collaboration among library staff (31.4 percent; (3 collaboration among library staff and patrons (14.3 percent; and (4 collaboration among patrons (8.6 percent. Examples of library wikis are presented within the article, as is a discussion for why wikis are primarily utilized within categories I and II and not within categories III and IV. It is clear that wikis have great utility within libraries, and the author urges further application of wikis in libraries.

  10. Catalog of physical protection equipment. Book 1: Volume II. Intrusion detection components

    International Nuclear Information System (INIS)

    Haberman, W.

    1977-06-01

    This volume covers acoustic components, microwave/radar components, electro-optic barriers, electric field components, orientation components, ferrous metal detection components, proximity detection components, vibration detection components, seismic components, pressure-sensitive components, pressure mats, continuity components, electrical/magnetic switches, fire detection components, and mechanical contact switches

  11. Test to prove the resistance to incidents of components of electric and control systems in the safety containment of nuclear power plants

    International Nuclear Information System (INIS)

    1982-01-01

    The marginal program for proving the suitability of safety-relevant components of electric and control systems in the safety containment during a loss-of-coolant incident is described. Variant test conditions are established in the component-specific test program. Special attention has been paid to the representation of the course of pressure and temperature for the performance test of the valve room of the Nuclear Power Plant Philippsburg 2. (DG) [de

  12. Electric-hybrid-vehicle simulation

    Science.gov (United States)

    Pasma, D. C.

    The simulation of electric hybrid vehicles is to be performed using experimental data to model propulsion system components. The performance of an existing ac propulsion system will be used as the baseline for comparative purposes. Hybrid components to be evaluated include electrically and mechanically driven flywheels, and an elastomeric regenerative braking system.

  13. State Virtual Libraries

    Science.gov (United States)

    Pappas, Marjorie L.

    2003-01-01

    Virtual library? Electronic library? Digital library? Online information network? These all apply to the growing number of Web-based resource collections managed by consortiums of state library entities. Some, like "INFOhio" and "KYVL" ("Kentucky Virtual Library"), have been available for a few years, but others are just starting. Searching for…

  14. Electric Vehicles. LC Science Tracer Bullet.

    Science.gov (United States)

    Buydos, John E., Comp.

    This document reviews the literature in the collections of the Library of Congress on electric vehicles. Not intended as a comprehensive bibliography, this guide is designed as the title implies, to put the reader "on target." This is of greatest utility to the beginning student of the topic. (AA)

  15. Roadmap for RFID Implementation in Central library, PEC University of Technology

    OpenAIRE

    Vasishta, Seema

    2009-01-01

    This paper gives brief idea about the emerging Radio Frequency Identification (RFID) technology, its importance in the library management system and its working. It also describes about the basic and optional components required for smooth working of the exercise. The aim is to consider how to extend RFID applications in an academic library keeping in view the scantiness of funds and scarcity of supporting staff. The article also illustrates a vivid picture about how RFID technology is acting...

  16. Research Library

    Science.gov (United States)

    Los Alamos National Laboratory Research Library Search Site submit Contact Us | Remote Access Standards Theses/Dissertations Research Help Subject Guides Library Training Video Tutorials Alerts Research Library: delivering essential knowledge services for national security sciences since 1947 Los

  17. The artifacts of component-based development

    International Nuclear Information System (INIS)

    Rizwan, M.; Qureshi, J.; Hayat, S.A.

    2007-01-01

    Component based development idea was floated in a conference name Mass Produced Software Components in 1968 (1). Since then engineering and scientific libraries are developed to reuse the previously developed functions. This concept is now widely used in SW development as component based development (CBD). Component-based software engineering (CBSE) is used to develop/ assemble software from existing components (2). Software developed using components is called component where (3). This paper presents different architectures of CBD such as Active X, common object request broker architecture (CORBA), remote method invocation (RMI) and simple object access protocol (SOAP). The overall objective of this paper is to support the practice of CBD by comparing its advantages and disadvantages. This paper also evaluates object oriented process model to adapt it for CBD. (author)

  18. Library Systems: FY 2013 Public Libraries Survey (Administrative Entity)

    Data.gov (United States)

    Institute of Museum and Library Services — Find key information on library systems around the United States.These data include imputed values for libraries that did not submit information in the FY 2013 data...

  19. Library Systems: FY 2012 Public Libraries Survey (Administrative Entity)

    Data.gov (United States)

    Institute of Museum and Library Services — Find key information on library systems around the United States.These data include imputed values for libraries that did not submit information in the FY 2012 data...

  20. Library Computing

    Science.gov (United States)

    Library Computing, 1985

    1985-01-01

    Special supplement to "Library Journal" and "School Library Journal" covers topics of interest to school, public, academic, and special libraries planning for automation: microcomputer use, readings in automation, online searching, databases of microcomputer software, public access to microcomputers, circulation, creating a…

  1. Libraries on the MOVE.

    Science.gov (United States)

    Edgar, Jim; And Others

    1986-01-01

    Presents papers from Illinois State Library and Shawnee Library System's "Libraries on the MOVE" conference focusing on how libraries can impact economic/cultural climate of an area. Topics addressed included information services of rural libraries; marketing; rural library development; library law; information access; interagency…

  2. A CORBA BASED ARCHITECTURE FOR ACCESSING REUSABLE SOFTWARE COMPONENTS ON THE WEB.

    Directory of Open Access Journals (Sweden)

    R. Cenk ERDUR

    2003-01-01

    Full Text Available In a very near future, as a result of the continious growth of Internet and advances in networking technologies, Internet will become the common software repository for people and organizations who employ component based reuse approach in their software development life cycles. In order to use the reusable components such as source codes, analysis, designs, design patterns during new software development processes, environments that support the identification of the components over Internet are needed. Basic elements of such an environment are the coordinator programs which deliver user requests to appropriate component libraries, user interfaces for querying, and programs that wrap the component libraries. First, a CORBA based architecture is proposed for such an environment. Then, an alternative architecture that is based on the Java 2 platform technologies is given for the same environment. Finally, the two architectures are compared.

  3. Comparison of Iranian National Medical Library with digital libraries of selected countries.

    Science.gov (United States)

    Zare-Farashbandi, Firoozeh; Najafi, Nayere Sadat Soleimanzade; Atashpour, Bahare

    2014-01-01

    The important role of information and communication technologies and their influence on methods of storing, retrieving information in digital libraries, has not only changed the meanings behind classic library activates but has also created great changes in their services. However, it seems that not all digital libraries provide their users with similar services and only some of them are successful in fulfilling their role in digital environment. The Iranian National Medical library is among those that appear to come short compared to other digital libraries around the world. By knowing the different services provided by digital libraries worldwide, one can evaluate the services provided by Iranian National Medical library. The goal of this study is a comparison between Iranian National Medical library and digital libraries of selected countries. This is an applied study and uses descriptive - survey method. The statistical population is the digital libraries around the world which were actively providing library services between October and December 2011 and were selected by using the key word "Digital Library" in Google search engine. The data-gathering tool was direct access to the websites of these digital libraries. The statistical study is descriptive and Excel software was used for data analysis and plotting of the charts. The findings showed that among the 33 digital libraries investigated worldwide, most of them provided Browse (87.87%), Search (84.84%), and Electronic information retrieval (57.57%) services. The "Help" in public services (48/48%) and "Interlibrary Loan" in traditional services (27/27%) had the highest frequency. The Iranian National Medical library provides more digital services compared to other libraries but has less classic and public services and has less than half of possible public services. Other than Iranian National Medical library, among the 33 libraries investigated, the leaders in providing different services are Library of

  4. Where to Publish and Find Ontologies? A Survey of Ontology Libraries

    Science.gov (United States)

    d'Aquin, Mathieu; Noy, Natalya F.

    2011-01-01

    One of the key promises of the Semantic Web is its potential to enable and facilitate data interoperability. The ability of data providers and application developers to share and reuse ontologies is a critical component of this data interoperability: if different applications and data sources use the same set of well defined terms for describing their domain and data, it will be much easier for them to “talk” to one another. Ontology libraries are the systems that collect ontologies from different sources and facilitate the tasks of finding, exploring, and using these ontologies. Thus ontology libraries can serve as a link in enabling diverse users and applications to discover, evaluate, use, and publish ontologies. In this paper, we provide a survey of the growing—and surprisingly diverse—landscape of ontology libraries. We highlight how the varying scope and intended use of the libraries a ects their features, content, and potential exploitation in applications. From reviewing eleven ontology libraries, we identify a core set of questions that ontology practitioners and users should consider in choosing an ontology library for finding ontologies or publishing their own. We also discuss the research challenges that emerge from this survey, for the developers of ontology libraries to address. PMID:22408576

  5. Modular high-throughput test stand for versatile screening of thin-film materials libraries

    International Nuclear Information System (INIS)

    Thienhaus, Sigurd; Hamann, Sven; Ludwig, Alfred

    2011-01-01

    Versatile high-throughput characterization tools are required for the development of new materials using combinatorial techniques. Here, we describe a modular, high-throughput test stand for the screening of thin-film materials libraries, which can carry out automated electrical, magnetic and magnetoresistance measurements in the temperature range of −40 to 300 °C. As a proof of concept, we measured the temperature-dependent resistance of Fe–Pd–Mn ferromagnetic shape-memory alloy materials libraries, revealing reversible martensitic transformations and the associated transformation temperatures. Magneto-optical screening measurements of a materials library identify ferromagnetic samples, whereas resistivity maps support the discovery of new phases. A distance sensor in the same setup allows stress measurements in materials libraries deposited on cantilever arrays. A combination of these methods offers a fast and reliable high-throughput characterization technology for searching for new materials. Using this approach, a composition region has been identified in the Fe–Pd–Mn system that combines ferromagnetism and martensitic transformation.

  6. Electric Motors for Non-Cryogenic Hybrid Electric and Turboelectric Propulsion

    Science.gov (United States)

    Duffy, Kirsten P.

    2015-01-01

    NASA Glenn Research Center is investigating hybrid electric and turboelectric propulsion concepts for future aircraft to reduce fuel burn, emissions, and noise. Systems studies show that the weight and efficiency of the electric system components need to be improved for this concept to be feasible. However, advances in motor component materials such as soft magnetic materials, hard magnetic materials, conductors, thermal insulation, and structural materials are expected in the coming years, and should improve motor performance. This study investigates several motor types for a one megawatt application, and projects the motor performance benefits of new component materials that might be available in the coming decades.

  7. Capturing Qualitative Data: Northwestern University Special Libraries' Acknowledgments Database

    Science.gov (United States)

    Stigberg, Sara; Guittar, Michelle; Morse, Geoffrey

    2015-01-01

    Assessment and supporting data have become of increasing interest in librarianship. In this paper, we describe the development and implementation of the Northwestern University Library Acknowledgments Database tool, which gathers and documents qualitative data, as well as its component reporting function. This collaborative project and resulting…

  8. The USF Libraries Virtual Library Project: A Blueprint for Development.

    Science.gov (United States)

    Metz-Wiseman, Monica; Silver, Susan; Hanson, Ardis; Johnston, Judy; Grohs, Kim; Neville, Tina; Sanchez, Ed; Gray, Carolyn

    This report of the Virtual Library Planning Committee (VLPC) is intending to serve as a blueprint for the University of South Florida (USF) Libraries as it shifts from print to digital formats in its evolution into a "Virtual Library". A comprehensive planning process is essential for the USF Libraries to make optimum use of technology,…

  9. Selective observation of photo-induced electric fields inside different material components in bulk-heterojunction organic solar cell

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xiangyu; Taguchi, Dai; Manaka, Takaaki; Iwamoto, Mitsumasa, E-mail: iwamoto@pe.titech.ac.jp [Department of Physical Electronics, Tokyo Institute of Technology, 2-12-1, S3-33 O-okayama, Meguro-ku, Tokyo 152-8552 (Japan)

    2014-01-06

    By using electric-field-induced optical second-harmonic generation (EFISHG) measurement at two laser wavelengths of 1000 nm and 860 nm, we investigated carrier behavior inside the pentacene and C{sub 60} component of co-deposited pentacene:C{sub 60} bulk-heterojunctions (BHJs) organic solar cells (OSCs). The EFISHG experiments verified the presence of two carrier paths for electrons and holes in BHJs OSCs. That is, two kinds of electric fields pointing in opposite directions are identified as a result of the selectively probing of SHG activation from C{sub 60} and pentacene. Also, under open-circuit conditions, the transient process of the establishment of open-circuit voltage inside the co-deposited layer has been directly probed, in terms of photovoltaic effect. The EFISHG provides an additional promising method to study carrier path of electrons and holes as well as dissociation of excitons in BHJ OSCs.

  10. Our Stories Transforming Our Libraries: The York County Library System

    Directory of Open Access Journals (Sweden)

    Mina Edmondson

    2016-11-01

    Full Text Available These narratives chronicle the authors’ journeys to collaborate and discover the transformative impact that stories have on library culture and library staff. This study describes a research collaboration between York County Libraries and Penn State York. In Phase I, we collected stories from library staff as the library system was being challenged to reimage public libraries for the future. The major themes and types of organizational stories identified in the initial narrative project were presented during a county-wide all-staff in-service training. The library District Consultant (first author and the Penn State professor (second author then facilitated a workshop designed to lead staff in their exploration of these topics and generate a written record of their storytelling/discussions. This data became the basis for Phase II of the project and allowed the system to strategically assess its evolving culture and identity.

  11. User-Focused Strategic Services for Technological University Libraries.

    Science.gov (United States)

    Townley, Charles T.

    This paper describes the New Mexico State University (NMSU) Library's strategic plan to develop its services amid an atmosphere of change. A summary of the following components of the strategic plan is given: vision; mission; values; and goals. The revised organizational functions are then illustrated, as well as the role of the selector-liaison…

  12. News from the Library: The 'long tail' Library

    CERN Multimedia

    CERN Library

    2012-01-01

    "The term 'long tail' has gained popularity in recent times as describing the retailing strategy of selling a large number of unique items with relatively small quantities sold of each usually in addition to selling fewer popular items in large quantities. The long tail was popularized by Chris Anderson, who mentioned Amazon.com, Apple and Yahoo! as examples of businesses applying this strategy." *   If we leave the business environment and move to the world of libraries, we still see this "long tail". Usually, only a small portion of a library's book collection accounts for the majority of its loans. On the other hand, there are a variety of "niche information needs" that might not be met, as libraries cannot afford to build up huge collections of documents available just-in-case. However, the networked environment of today's libraries can offer a solution. Online networks of libraries ca...

  13. Generalized Portable SHMEM Library for High Performance Computing

    Energy Technology Data Exchange (ETDEWEB)

    Parzyszek, Krzysztof [Iowa State Univ., Ames, IA (United States)

    2003-01-01

    This dissertation describes the efforts to design and implement the Generalized Portable SHMEM library, GPSHMEM, as well as supplementary tools. There are two major components of the GPSHMEM project: the GPSHMEM library itself and the Fortran 77 source-to-source translator. The rest of this thesis is divided into two parts. Part I introduces the shared memory model and the distributed shared memory model. It explains the motivation behind GPSHMEM and presents its functionality and performance results. Part II is entirely devoted to the Fortran 77 translator call fgpp. The need for such a tool is demonstrated, functionality goals are stated, and the design issues are presented along with the development of the solutions.

  14. State-of-the-art assessment of electric and hybrid vehicles

    Science.gov (United States)

    1978-01-01

    Data are presented that were obtained from the electric and hybrid vehicles tested, information collected from users of electric vehicles, and data and information on electric and hybrid vehicles obtained on a worldwide basis from manufacturers and available literature. The data given include: (1) information and data base (electric and hybrid vehicle systems descriptions, sources of vehicle data and information, and sources of component data); (2) electric vehicles (theoretical background, electric vehicle track tests, user experience, literature data, and summary of electric vehicle status); (3) electric vehicle components (tires, differentials, transmissions, traction motors, controllers, batteries, battery chargers, and component summary); and (4) hybrid vehicles (types of hybrid vehicles, operating modes, hybrid vehicles components, and hybrid vehicles performance characteristics).

  15. Students lead the library the importance of student contributions to the academic library

    CERN Document Server

    Arnold-Garza, Sara

    2017-01-01

    In six parts-Students as Employees, Students as Curators, Students as Ambassadors, the Library as Client, Student Groups as Library Leaders, and Students as Library Designers-Students Lead the Library provides case studies of programs and initiatives that seek student input, assistance, and leadership in the academic library. Through the library, students can develop leadership skills, cultivate high levels of engagement, and offer peer learning opportunities. Through the students, libraries can create participatory design processes, enhancement and transformation of the library's core functions, and expressed library value for stakeholders.

  16. Planning for the Automation of School Library Media Centers.

    Science.gov (United States)

    Caffarella, Edward P.

    1996-01-01

    Geared for school library media specialists whose centers are in the early stages of automation or conversion to a new system, this article focuses on major components of media center automation: circulation control; online public access catalogs; machine readable cataloging; retrospective conversion of print catalog cards; and computer networks…

  17. Libraries and Learning

    Science.gov (United States)

    Rainie, Lee

    2016-01-01

    The majority of Americans think local libraries serve the educational needs of their communities and families pretty well and library users often outpace others in learning activities. But many do not know about key education services libraries provide. This report provides statistics on library usage and presents key education services provided…

  18. Cloud computing: An innovative tool for library services

    OpenAIRE

    Sahu, R.

    2015-01-01

    Cloud computing is a new technique of information communication technology because of its potential benefits such as reduced cost, accessible anywhere any time as well as its elasticity and flexibility. In this Paper defines cloud Computing, definition, essential characteristics, model of cloud computing, components of cloud, advantages & drawbacks of cloud computing and also describe cloud computing in libraries.

  19. Evaluating Public Libraries Using Standard Scores: The Library Quotient.

    Science.gov (United States)

    O'Connor, Daniel O.

    1982-01-01

    Describes a method for assessing the performance of public libraries using a standardized scoring system and provides an analysis of public library data from New Jersey as an example. Library standards and the derivation of measurement ratios are also discussed. A 33-item bibliography and three data tables are included. (JL)

  20. The impact of computerisation of library operations on library ...

    African Journals Online (AJOL)

    The use of computer-based systems in libraries and information units is now a vogue. The era of manual system in library operations is on its way to extinction. Recent developments in information world tend towards a globalized information communication technology (ICT). The library as a dynamic institution cannot afford ...

  1. Library Systems: FY 2014 Public Libraries Survey (Administrative Entity Data)

    Data.gov (United States)

    Institute of Museum and Library Services — Find key information on library systems around the United States.These data include imputed values for libraries that did not submit information in the FY 2014 data...

  2. Fusion of Library, Archive, Museum, Publisher (LAMP: the NTNU Library Experience

    Directory of Open Access Journals (Sweden)

    Ke, Hao-Ren

    2016-06-01

    Full Text Available The convergence of libraries, archives, and museums (LAMs has garnered attention in recent years. Extending the tendency further, National Taiwan Normal University (NTNU fuses the library, archive, museum, and publisher (LAMP functionality together in its library. This article elaborates on the LAMP practices of the NTNU Library, which indicates that without creating new units in a university, its library can play a good role of curating invaluable university assets.

  3. The Homeless in the Public Library: Implications for Access to Libraries.

    Science.gov (United States)

    Simmons, Randall C.

    1985-01-01

    Discussion of the homeless in American public libraries focuses on harmless individuals who may be considered nuisance by library staff/patrons. Highlights include literature about problem library patrons, national problem, social issues, major themes (offense to others and library staff, balancing rights, and elitism), and implications for…

  4. What in the World Is a State Library? Issues in State Library Management.

    Science.gov (United States)

    Weaver, Barbara

    1990-01-01

    Provides an overview of the various roles of state libraries and discusses several issues of concern to all state libraries: the role of the library within state government; resources sharing; school library development; public library development; automation consulting; continuing education for library professionals; and the leadership role of…

  5. Libraries in society

    DEFF Research Database (Denmark)

    Kristiansson, Michael; Skouvig, Laura Henriette Christine

    2008-01-01

    The purpose of the paper is to investigate the phenomenon of openness in relation to library development. The term openness is presented and related to library development from historical and theoretical perspectives. The paper elaborates on the differences over time on to how openness has been...... understood in a library setting. Historically, openness in form of the open shelves played a crucial role in developing the modern public library. The paper examines this openness-centred library policy as adopted by Danish public libraries in the beginning of the 20th century by applying the theories...... by Michel Foucault on discourse and power to the introduction of open shelves. Furthermore, the paper discusses current challenges facing the modern public library in coping with openness issues that follow from changes in society and advances in technology. These influences and developments are not least...

  6. Library fingerprints: a novel approach to the screening of virtual libraries.

    Science.gov (United States)

    Klon, Anthony E; Diller, David J

    2007-01-01

    We propose a novel method to prioritize libraries for combinatorial synthesis and high-throughput screening that assesses the viability of a particular library on the basis of the aggregate physical-chemical properties of the compounds using a naïve Bayesian classifier. This approach prioritizes collections of related compounds according to the aggregate values of their physical-chemical parameters in contrast to single-compound screening. The method is also shown to be useful in screening existing noncombinatorial libraries when the compounds in these libraries have been previously clustered according to their molecular graphs. We show that the method used here is comparable or superior to the single-compound virtual screening of combinatorial libraries and noncombinatorial libraries and is superior to the pairwise Tanimoto similarity searching of a collection of combinatorial libraries.

  7. E-Library and Traditonal Library Resources Usage: A Comparative ...

    African Journals Online (AJOL)

    A comparative usage of e-library and traditional resources in Nigerian libraries was examined in this study. A descriptive survey method was adopted and a purposive sampling technique was used to select the sample and the process produced 125 academic, research, and public libraries in Nigeria. A total of 116 cases ...

  8. Reliability & availability of wind turbine electrical & electronic components

    NARCIS (Netherlands)

    Tavner, P.; Faulstich, S.; Hahn, B.; Bussel, van G.J.W.

    2010-01-01

    Recent analysis of European onshore wind turbine reliability data has shown that whilst wind turbine mechanical subassemblies tend to have relatively low failure rates but long downtimes, electrical and electronic subassemblies have relatively high failure rates and short downtimes. For onshore wind

  9. Library 2.0 A New Service Model For Libraries

    Directory of Open Access Journals (Sweden)

    Agnes Erich

    2007-01-01

    Full Text Available The utilization of the new information and communication technologies implies a series of changes concerning the libraries. Currently it is spoken more and more about a new type of service offered by them, Library 2.0, which brings in foreground the user who becomes a modeler of the library services and resources. The information structures customer is not satisfied anymore by the unidirectional access to the resources, he wanted to be involved in the evaluation of them, making comments and sharing his ideas with another user. In this sense the library managers are looking for more efficient means to deliver services so that to obtain a proper feedback which enable them to take the best measures to make profitable them. Library 2.0 can be a solution for all these problems.

  10. The Development of National Library Functions in the British Museum Library and the Library of Congress.

    Science.gov (United States)

    Stewart, Richard Addison

    The histories of two national libraries, the British Museum Library and the Library of Congress, are examined with respect to the development of each of three functions: (1) the acquisition and maintenance of a comprehensive collection of the country's publications, usually by copyright deposit; (2) the maintenance of basic research collections in…

  11. News from the Library: A new key reference work for the engineer: ASME's Boiler and Pressure Vessel Code at the CERN Library

    CERN Multimedia

    CERN Library

    2011-01-01

    The Library is aiming at offering a range of constantly updated reference books, to cover all areas of CERN activity. A recent addition to our collections strengthens our offer in the Engineering field.   The CERN Library now holds a copy of the complete ASME Boiler and Pressure Vessel Code, 2010 edition. This code establishes rules of safety governing the design, fabrication, and inspection of boilers and pressure vessels, and nuclear power plant components during construction. This document is considered worldwide as a reference for mechanical design and is therefore important for the CERN community. The Code published by ASME (American Society of Mechanical Engineers) is kept current by the Boiler and Pressure Committee, a volunteer group of more than 950 engineers worldwide. The Committee meets regularly to consider requests for interpretations, revision, and to develop new rules. The CERN Library receives updates and includes them in the volumes until the next edition, which is expected to ...

  12. Process weakness assessment by profiling all incoming design components

    Science.gov (United States)

    Zhuang, Linda; Cai, MengFeng; Zhu, Annie; Zhang, Yifan; Sweis, Jason; Lai, Ya-Chieh

    2017-03-01

    Foundries normally receive a large number of designs from different customers every day. It is desired to automatically profile each incoming design to quantify certain metrics like 1) the number of polygons per GDS layers 2) what kind of electrical components the design contains 3) what the dimensions of each electrical component are 4) how frequently any size of components have been used and their physical locations. This paper will present a novel method of how to generate a complete profile of components for any particular design. The component checking flow need to be completed within hours so it will have very little impact on the tape-out time. A pre-layer checking method is also run to group commonly used layers for different electrical components and then employ different layout profiling flows. The foundry does this design chip analysis in order to find potentially weak devices due to their size or special size requirements for particular electrical components. The foundry can then take pre-emptive action to avoid yield loss or make an unnecessary mask for new incoming products before fab processing starts.

  13. Use of library statistics to support library and advisory services and ...

    African Journals Online (AJOL)

    Statistical information is a vital tool for management and development of organizations. Keeping statistics of activities is basic to the survival and progress of a library and enables the library to measure its performance periodically. The National Library of Nigeria (NLN) places high premium on the library statistics that it ...

  14. Electric Motor Considerations for Non-Cryogenic Hybrid Electric and Turboelectric Propulsion

    Science.gov (United States)

    Duffy, Kirsten P.

    2015-01-01

    NASA Glenn Research Center is investigating hybrid electric and turboelectric propulsion concepts for future aircraft to reduce fuel burn, emissions, and noise. Systems studies show that the weight and efficiency of the electric system components need to be improved for this concept to be feasible. However, advances in motor component materials such as soft magnetic materials, hard magnetic materials, conductors, thermal insulation, and structural materials are expected in the coming years, and should improve motor performance. This study investigates several motor types for a one megawatt application, and projects the motor performance benefits of new component materials that might be available in the coming decades.

  15. Is Your Academic Library Pinning? Academic Libraries and Pinterest

    Science.gov (United States)

    Thornton, Elaine

    2012-01-01

    Academic libraries are flocking to online social networking sites in an effort to meet users where they are. Pinterest is the latest of these rapidly growing online social networking tools. The author of this article reports results from a survey on academic libraries' presence on Pinterest. The survey found most academic library pinboards are in…

  16. Academic Research Library as Broker in Addressing Interoperability Challenges for the Geosciences

    Science.gov (United States)

    Smith, P., II

    2015-12-01

    Data capture is an important process in the research lifecycle. Complete descriptive and representative information of the data or database is necessary during data collection whether in the field or in the research lab. The National Science Foundation's (NSF) Public Access Plan (2015) mandates the need for federally funded projects to make their research data more openly available. Developing, implementing, and integrating metadata workflows into to the research process of the data lifecycle facilitates improved data access while also addressing interoperability challenges for the geosciences such as data description and representation. Lack of metadata or data curation can contribute to (1) semantic, (2) ontology, and (3) data integration issues within and across disciplinary domains and projects. Some researchers of EarthCube funded projects have identified these issues as gaps. These gaps can contribute to interoperability data access, discovery, and integration issues between domain-specific and general data repositories. Academic Research Libraries have expertise in providing long-term discovery and access through the use of metadata standards and provision of access to research data, datasets, and publications via institutional repositories. Metadata crosswalks, open archival information systems (OAIS), trusted-repositories, data seal of approval, persistent URL, linking data, objects, resources, and publications in institutional repositories and digital content management systems are common components in the library discipline. These components contribute to a library perspective on data access and discovery that can benefit the geosciences. The USGS Community for Data Integration (CDI) has developed the Science Support Framework (SSF) for data management and integration within its community of practice for contribution to improved understanding of the Earth's physical and biological systems. The USGS CDI SSF can be used as a reference model to map to Earth

  17. Library/vendor relationships

    CERN Document Server

    Brooks, Sam

    2014-01-01

    A view of the mutual dependence between libraries and vendorsAs technology advances, libraries are forced to reach beyond their own resources to find effective ways to maintain accuracy and superior service levels. Vendors provide databases and integrated library systems that perform those functions for profit. Library/Vendor Relationships examines the increasing cooperation in which libraries find they must participate in, and vice versa, with the vendors that provide system infrastructure and software. Expert contributors provide insights from all sides of this unique collaboration, offering

  18. THERMLIB, Generator and Edit of Program THERMOS-OTA Library. THERLIB, Library Generated for THERMOS from FACEL Library

    International Nuclear Information System (INIS)

    Rastas, A.

    1985-01-01

    1 - Description of problem or function: THERMLIB is a code that generates, revises and expands the input data library to the lattice cell code THERMOS-OTA. It can be used to: - create an entirely new library; - modify the data of library materials, remove materials, add materials; - list the library. 2 - Restrictions on the complexity of the problem: Max. of 30 materials may be modified or removed. Max. of 30 new materials may be created. Max. of 50 velocity groups

  19. Fundamentals of electrical drives

    CERN Document Server

    Veltman, André; De Doncker, Rik W

    2007-01-01

    Provides a comprehensive introduction to various aspects of electrical drive systems. This volume provides a presentation of dynamic generic models that cover all major electrical machine types and modulation/control components of a drive as well as dynamic and steady state analysis of transformers and electrical machines.

  20. Long term effects of the environment on safety related electric components in a nuclear power station. State-of-the-art

    International Nuclear Information System (INIS)

    Spaang, K.

    1984-01-01

    This paper reports the first stage in a research project aimed at finding and evaluating suitable methods to qualify electric components used in nuclear power plants. This part of the research project is concerned with the technical standards now used. The information is obtained at international conferences, visits to the industry and institutions in the USA and from literature studies. (K.A.E.)

  1. Component Fragility Research Program: Phase 1 component prioritization

    International Nuclear Information System (INIS)

    Holman, G.S.; Chou, C.K.

    1987-06-01

    Current probabilistic risk assessment (PRA) methods for nuclear power plants utilize seismic ''fragilities'' - probabilities of failure conditioned on the severity of seismic input motion - that are based largely on limited test data and on engineering judgment. Under the NRC Component Fragility Research Program (CFRP), the Lawrence Livermore National Laboratory (LLNL) has developed and demonstrated procedures for using test data to derive probabilistic fragility descriptions for mechanical and electrical components. As part of its CFRP activities, LLNL systematically identified and categorized components influencing plant safety in order to identify ''candidate'' components for future NRC testing. Plant systems relevant to safety were first identified; within each system components were then ranked according to their importance to overall system function and their anticipated seismic capacity. Highest priority for future testing was assigned to those ''very important'' components having ''low'' seismic capacity. This report describes the LLNL prioritization effort, which also included application of ''high-level'' qualification data as an alternate means of developing probabilistic fragility descriptions for PRA applications

  2. Teleporting the library?

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2009-01-01

    In 2007, six Danish public libraries established a virtual library, Info Island DK, in Second Life. This article discusses the library project in terms of design. The design processes include the planning and implementation of the virtual library structure and its equipment, as well...... as the organizing and carrying out of activities in the virtual setting. It will be argued that, to a large extent, conventions have determined design and use of the virtual library, and also that design has had an impact on the attitudes and understanding of the participants....

  3. Reliability of Wind Turbine Components-Solder Elements Fatigue Failure

    DEFF Research Database (Denmark)

    Kostandyan, Erik; Sørensen, John Dalsgaard

    2012-01-01

    on the temperature mean and temperature range. Constant terms and model errors are estimated. The proposed methods are useful to predict damage values for solder joint in power electrical components. Based on the proposed methods it is described how to find the damage level for a given temperature loading profile....... The proposed methods are discussed for application in reliability assessment of Wind Turbine’s electrical components considering physical, model and measurement uncertainties. For further research it is proposed to evaluate damage criteria for electrical components due to the operational temperature...

  4. Public Libraries in Bangladesh.

    Science.gov (United States)

    Khan, M. H.

    1984-01-01

    Overview of library movement in Bangladesh highlights British (1851-1947) and Pakistan periods (1947-1971), separation of Bangladesh from Pakistan, libraries in development plans (1951-1970), three important public libraries, development of national library, book resources, a library network plan, legislation, finance, leadership, library…

  5. Library system of Italy

    Directory of Open Access Journals (Sweden)

    Nataša Gerbec

    2003-01-01

    Full Text Available In the European extent, Italy is the cradle of libraries and library sciences. In the past, Italian national public libraries played an important role through their vast book treasury. But only during the last thirty years have public libraries been developed following the Anglo-American public library model. Italy does not have any uniform or general legislation concerning libraries. On the state level, this area is regulated by some separate acts, while on the regional level there is a collection of various acts and regulations. Libraries are not strictly divided into general categories. It is required that the professionals engaged in Italian libraries should have secondary or university education. The level of their professional tasks depends on the type of library and its capacity. The competency for the development in the field of librarianship is assigned to The Ministry of Cultural and Environment Heritage as well as to its subordinate institutions (Central Institute for the Union catalogue of Italian Libraries and for Bibliographic Information, Central Institute for Book Pathology, Observatory for International Libraries Programmes.

  6. Stemming of Slovenian library science texts

    Directory of Open Access Journals (Sweden)

    Polona Vilar

    2002-01-01

    Full Text Available The theme of the article is the preparation of a stemming algorithm for Slovenian library science texts. The procedure consisted of three phases: learning, testing and evaluation.The preparation of the optimal stemmer for Slovenian texts from the field of library science is presented, its testing and comparison with two other stemmers for the Slovenian language: the Popovič stemmer and the Generic stemmer. A corpus of 790.000 words from the field of library science was used for learning. Lists of stems, word endings and stop-words were built. In the testing phase, the component parts of the algorithm were tested on an additional corpus of 167.000 words. In the evaluation phase, a comparison of the three stemmers processing the same word corpus was made. The results of each stemmer were compared with an intellectually prepared control result of the stemming of the corpus. It consisted of groups of semantically connected words with no errors. Understemming was especially monitored – the number of stems for semantically connected words, produced by an algorithm. The results were statistically processed with the Kruskal-Wallis test. The Optimal stemmer produced the best results.It matched best with the reference results and also gave the smallest number of stems for one semantic meaning. The Popovič stemmer followed closely. The Generic stemmer proved to be the least accurate. The procedures described in the thesis can represent a platform for the development of the tools for automatic indexing and retrieval for library science texts in Slovenian language.

  7. The library catalogue as a retrieval tool in academic libraries: a case ...

    African Journals Online (AJOL)

    The library catalogue as a retrieval tool in academic libraries: a case study of federal university of technology Owerri library. ... Information Technologist (The) ... be emphasized and made compulsory for a ll library users and strengthening the ...

  8. Design and application of a C++ macromolecular class library.

    Science.gov (United States)

    Chang, W; Shindyalov, I N; Pu, C; Bourne, P E

    1994-01-01

    PDBlib is an extensible object oriented class library written in C++ for representing the 3-dimensional structure of biological macromolecules. PDBlib forms the kernel of a larger software framework being developed for assiting in knowledge discovery from macromolecular structure data. The software design strategy used by PDBlib, how the library may be used and several prototype applications that use the library are summarized. PDBlib represents the structural features of proteins, DNA, RNA, and complexes thereof, at a level of detail on a par with that which can be parsed from a Protein Data Bank (PDB) entry. However, the memory resident representation of the macromolecule is independent of the PDB entry and can be obtained from other back-end data sources, for example, existing relational databases and our own object oriented database (OOPDB) built on top of the commercial object oriented database, ObjectStore. At the front-end are several prototype applications that use the library: Macromolecular Query Language (MMQL) is based on a separate class library (MMQLlib) for building complex queries pertaining to macromolecular structure; PDBtool is an interactive structure verification tool; and PDBview, is a structure rendering tool used either as a standalone tool or as part of another application. Each of these software components are described. All software is available via anonymous ftp from cuhhca.hhmi.columbia.edu.

  9. News from the Library

    CERN Multimedia

    CERN Library

    2010-01-01

    The LHC Library to be merged with the Central Library. Not everyone knows that CERN Scientific Information Service currently counts three physical libraries on site. The Central Library is located in Building 52 and there are two satellite libraries located respectively in building 30 (the LHC Library) and in building 864 on Prévessin site (the SPS Library). Moreover, the Legal Service Library is located in Building 60. In the past, there have been at CERN up to 6 satellite libraries; they were essential at a time when information was only in paper form and having multiple copies of documents located in several places at CERN was useful to facilitate scientific research. Today, this need is less critical as most of our resources are online. That is why, following a SIPB (Scientific Information Policy Board) decision, the collections of the LHC Library will be merged this summer with the Central collection. This reorganization and centralization of resources will improve loan services. The SP...

  10. Using an Untapped Resource: Expanding the Role of the Student Worker at the Bio-Medical Library

    Science.gov (United States)

    Aho, Melissa K.; Beschnett, Anne M.; Reimer, Emily Y.

    2010-01-01

    Student workers have always been a traditional and valuable component to the smooth running of many academic health sciences libraries. However, in recent years many libraries have redefined student workers' roles to extend beyond their traditional scope due to a range of factors, such as loss of staff and budget cutbacks. The Bio-Medical Library…

  11. Managing electrical safety

    CERN Document Server

    Wiggins, James H, Jr

    2001-01-01

    Managing Electrical Safety provides an overview of electric basics, hazards, and established standards that enables you to understand the hazards you are likely to encounter in your workplace. Focusing on typical industrial environments-which utilize voltages much higher than household or office circuits-the author identifies the eight key components of an electrical safety program and examines each using a model safety management process. You'll learn how to identify electrical hazards, how to prescribe necessary electrical Personal Protective Equipment, how to ensure that equipment is de-ene

  12. Electric field measurements at subcritical, oblique bow shock crossings

    International Nuclear Information System (INIS)

    Wygant, J.R.; Bensadoun, M.; Mozer, F.S.

    1987-01-01

    Electric field measurements at oblique, subcritical bow shock crossings are presented from the ISEE 1 University of California, Berkeley, double-probe electric field experiment. The measurements averaged over the 3-s spin period of the spacecraft provide the first observations of the large-scale (100 km) laminar oscillations in the longitudinal component of the electric field associated with the whistler precursor which is characteristic of these dispersive shocks. The amplitude of the oscillations increases from ∼0.5 mV/m to a maximum of 6 mV/m across the magnetic ramp of the shock (directed along the shock normal). The calculated electric potential drops across the shocks varied from 340 to 550 volts, which is 40-60% of the observed loss of kinetic energy associated with the bulk flow of the ions. These measurements suggest that at these shocks the additional deceleration of incident ions is due to the Lorentz force. The contributions to the normal component of the large-scale electric field at the shock due to the parallel and perpendicular components (relative to the magnetic field) of the electric field are evaluated. It is shown that the perpendicular component of the electric field dominates, accounting for most of the cross-shock potential, but that there is a nonnegligible parallel component. This large-scale parallel component has a magnitude of 1-2 mV/m which sometimes results in a potential well for electrons with a depth of ∼150 eV. It is experimentally demonstrated that the dominance of the perpendicular over the parallel component of the electric field resulted in a correlation between the longitudinal component of the large-scale electric field and the fluctuations in the magnetic field component perpendicular to the coplanarity plane

  13. Library Research and Statistics. Research on Libraries and Librarianship in 2002; Number of Libraries in the United States and Canada; Highlights of NCES Surveys; Library Acquisition Expenditures, 2001-2002: U.S. Public, Academic, Special, and Government Libraries; LJ Budget Report: A Precarious Holding Pattern; Price Indexes for Public and Academic Libraries; Library Buildings 2002: The Building Buck Doesn't Stop Here.

    Science.gov (United States)

    Lynch, Mary Jo; Oder, Norman; Halstead, Kent; Fox, Bette-Lee

    2003-01-01

    Includes seven reports that discuss research on libraries and librarianship, including academic, public, and school libraries; awards and grants; number of libraries in the United States and Canada; National Center for Education Statistics results; library expenditures for public, academic, special, and government libraries; library budgets; price…

  14. Library design practices for success in lead generation with small molecule libraries.

    Science.gov (United States)

    Goodnow, R A; Guba, W; Haap, W

    2003-11-01

    The generation of novel structures amenable to rapid and efficient lead optimization comprises an emerging strategy for success in modern drug discovery. Small molecule libraries of sufficient size and diversity to increase the chances of discovery of novel structures make the high throughput synthesis approach the method of choice for lead generation. Despite an industry trend for smaller, more focused libraries, the need to generate novel lead structures makes larger libraries a necessary strategy. For libraries of a several thousand or more members, solid phase synthesis approaches are the most suitable. While the technology and chemistry necessary for small molecule library synthesis continue to advance, success in lead generation requires rigorous consideration in the library design process to ensure the synthesis of molecules possessing the proper characteristics for subsequent lead optimization. Without proper selection of library templates and building blocks, solid phase synthesis methods often generate molecules which are too heavy, too lipophilic and too complex to be useful for lead optimization. The appropriate filtering of virtual library designs with multiple computational tools allows the generation of information-rich libraries within a drug-like molecular property space. An understanding of the hit-to-lead process provides a practical guide to molecular design characteristics. Examples of leads generated from library approaches also provide a benchmarking of successes as well as aspects for continued development of library design practices.

  15. Chat reference service in medical libraries: part 2--Trends in medical school libraries.

    Science.gov (United States)

    Dee, Cheryl R

    2003-01-01

    An increasing number of medical school libraries offer chat service to provide immediate, high quality information at the time and point of need to students, faculty, staff, and health care professionals. Part 2 of Chat Reference Service in Medical Libraries presents a snapshot of the current trends in chat reference service in medical school libraries. In late 2002, 25 (21%) medical school libraries provided chat reference. Trends in chat reference services in medical school libraries were compiled from an exploration of medical school library Web sites and informal correspondence from medical school library personnel. Many medical libraries are actively investigating and planning new chat reference services, while others have decided not to pursue chat reference at this time. Anecdotal comments from medical school library staff provide insights into chat reference service.

  16. ORIGEN-S data libraries

    International Nuclear Information System (INIS)

    Ryman, J.C.

    1984-01-01

    There are five card-image nuclear data libraries: (1) a small light element library for 253 nuclides, (2) a large light element library for 687 nuclides, (3) an actinide library for 101 nuclides, (4) a small fission product library for 461 nuclides, and (5) a large fission product library for 821 nuclides. The data for each nuclide are contained on five card-image records. The first card image contains decay data (half-life, branching fractions, recoverable energy per decay and the fraction of recoverable energy from photons), percent natural abundance, and radioactivity concentration guides. The last four card images contain cross section and (for fission product nuclides) fission yield data for four reactor types (HTGR, LWR, LMFBR, and MSBR), with one card for each reactor type. The card-image nuclear data libraries are the basic libraries for ORIGEN-S. The code can be run using these libraries directly, or it can be run from a binary data library which (prior to any cross section or other nuclear data updating) was created by running the COUPLE code to convert one or more of these card-image libraries

  17. Shaking table qualification tests of mechanical and electrical components

    International Nuclear Information System (INIS)

    Jurukovski, D.

    1993-01-01

    This presentation covers the experience of the Institute of Earthquake Engineering and Engineering Seismology, Skopje, Republic of Macedonia in seismic qualification of mechanical components by shaking table testing. The characteristics of the biaxial seismic and single component shaking tables used at the Institute are given. Some examples of the experience from performed test for reactor components are included

  18. Main Libraries, Branches, and Bookmobiles: FY 2013 Public Libraries Survey (Outlet)

    Data.gov (United States)

    Institute of Museum and Library Services — Find key information on main libraries, branches, and bookmobiles, including FSCS IDs and location.These data include imputed values for libraries that did not...

  19. Afghanistan Digital Library Initiative: Revitalizing an Integrated Library System

    Directory of Open Access Journals (Sweden)

    Yan HAN

    2007-12-01

    Full Text Available This paper describes an Afghanistan digital library initiative of building an integrated library system (ILS for Afghanistan universities and colleges based on open-source software. As one of the goals of the Afghan eQuality Digital Libraries Alliance, the authors applied systems analysis approach, evaluated different open-source ILSs, and customized the selected software to accommodate users’ needs. Improvements include Arabic and Persian language support, user interface changes, call number label printing, and ISBN-13 support. To our knowledge, this ILS is the first at a large academic library running on open-source software.

  20. Presentation of the selected French libraries and the French library system

    Directory of Open Access Journals (Sweden)

    Moja Kotar

    2007-01-01

    Full Text Available The Selected French libraries (Bibliotheque nationale de France, Bibliotheque publique d’information, multimedia library of the Cité des sciences et de l’industrie as well as Paris public libraries are presented in the article. France does not have a union catalogue at the national level, therefore libraries use different platforms for shared cataloguing and compile more union catalogues. According to their needs, French libraries join into consortia for the acquisition of electronic resources, which can be either geographically or thematically delimited or formed by the institutions of the same status. The author believes that the Slovenian library network works well considering much smaller budget for culture and higher education in comparison with France. To improve its performance, more funds would have to be allocated and higher reputation of the library profession achieved, comparable to the situation in France. Digitization of resources is the area where the Slovenian librarianship lags most behind the French one.

  1. German Librarianship and Munich Libraries

    Directory of Open Access Journals (Sweden)

    Osman Ümit Özen

    1994-06-01

    Full Text Available There are 27 municipal libraries including the Central Public Library in Munich. The other important libraries in the city are Bayern State National Library, Maximillian University Library, a technical highschool library and the "Deutsches Musuem" Library. All these libraries are financed locally. The author introduces these libraries briefly and compares German libraries with Turkish libraries. He concludes that although theoretically there are not distinctive differences, in practice, buildings and their layout are better in Germany where more variety of services are offered. In Turkey standardization has not been realized yet. Turkey needs to computerize and network to improve the services offered in an efficient way.

  2. Assessment of Library Instruction and Library Literacy Skills of First ...

    African Journals Online (AJOL)

    This study investigated the effectiveness and impact of library instruction (GST 111 – the use of library) course on library literacy skills of first year undergraduate students. The study adopted the descriptive survey research method and questionnaire was used as the research instrument. First year undergraduate students of ...

  3. Student Library Pages: Valuable Resource for the Library Media Center.

    Science.gov (United States)

    Crowther, Eleanor

    1993-01-01

    Describes the use of students as library pages at the Loudoun Country Day School (Virginia). Highlights include student selection procedures, including interviews; parental consent form; library page duties; benefits to students; benefits to the library; and parent attitudes. Copies of the student interview form and parental consent form are…

  4. The Value of Nonmedical Academic Libraries to Medical Libraries: A Case in Point

    Science.gov (United States)

    Drake, Paul B.

    2010-01-01

    While the National Library of Medicine created the National Network of Libraries of Medicine (NN/LM) as a network to provide medical and health information, historically few nonmedical academic libraries have participated. University medical libraries and hospital libraries have been the major focus of the Network. Recently, the NNLM has…

  5. In-depth investigation of high-energy arcing faults (HEAF) of electrical components with possible induced fires; Vertiefte Untersuchungen zum hochenergetischen Versagen elektrischer Komponenten (HEAF) mit moeglicher Brandfolge

    Energy Technology Data Exchange (ETDEWEB)

    Roewekamp, Marina

    2015-11-15

    Main objective of the project 3611R01301 performed on behalf of the Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety (BMUB) is an in-depth investigation of fires at electrical components induced by high energy arcing faults (HEAF) according to their non-negligible significance to nuclear safety. This report provides an overview on the insights with respect to high energy arcing faults at electrical components mainly gained from investigations of the national as well as international operating experience from nuclear installations. Moreover, the insights from the international operating experience have resulted in an experimental program carried out in the frame of a task by the OECD Nuclear Energy Agency (NEA) in order to investigate failures of electrical components, e. g. breakers, switchgears or transformers, installed in nuclear power plants of the member countries due to HEAF and potential consequential fires. The results of the in-depth analyses and experimental investigations shall be used for identifying potential areas of damage in a suitable manner. The results based on inter-national research shall also be checked with respect to their applicability to the situation in German nuclear power plants.

  6. Quality Assurance and Functionality Tests on Electrical Components during the ATLAS IBL Production

    CERN Document Server

    Bassalat, A; The ATLAS collaboration

    2014-01-01

    During the shutdown of 2013-2014, for the enhancement of the current ATLAS Pixel Detector, a fourth layer (Insertable B Layer, IBL) is being built and will be installed between the innermost layer and a new beam pipe. A new generation of readout chip has been developed, and two different sensor designs, a rather conventional planar and a 3D design, have been bump bonded to the Front Ends. Additionally, new staves and module flex circuits have been developed. A production QA test bench was therefore established to test all production staves before integration with the new beam pipe. Quality assurance measurements under cleanroom conditions, including temperature and humidity control, are being performed on the individual components during the various production steps of the IBL; namely, connectivity tests, electrical tests and signal probing on individual parts and assembled subsystems. This paper discusses the pre-assembly QC procedures, the capabilities of the stave qualification setup, and recent results fr...

  7. Marketing the Virtual Library

    Science.gov (United States)

    Fagan, Jody Condit

    2009-01-01

    Far more people are familiar with their local public or college library facility than their library's website and online resources. In fact, according to a recent survey, 96% of Americans said they had visited a library in person, but less than one-third have visited their online library. Since everyone agrees that online library resources are…

  8. Findings from the Evaluation of the National Library Power Program. Executive Summary. An Initiative of the DeWitt Wallace-Reader's Digest Fund.

    Science.gov (United States)

    Zweizig, Douglas; Hopkins, Dianne McAfee

    This document presents the executive summary of an evaluation of Library Power, a program of the DeWitt Wallace-Reader's Digest Fund to enhance and elevate the role of libraries in public schools. The report begins with an examination of Library Power's core components (collection development, facilities refurbishing, flexible scheduling,…

  9. The use of quality benchmarking in assessing web resources for the dermatology virtual branch library of the National electronic Library for Health (NeLH).

    Science.gov (United States)

    Kamel Boulos, M N; Roudsari, A V; Gordon, C; Muir Gray, J A

    2001-01-01

    In 1998, the U.K. National Health Service Information for Health Strategy proposed the implementation of a National electronic Library for Health to provide clinicians, healthcare managers and planners, patients and the public with easy, round the clock access to high quality, up-to-date electronic information on health and healthcare. The Virtual Branch Libraries are among the most important components of the National electronic Library for Health. They aim at creating online knowledge based communities, each concerned with some specific clinical and other health-related topics. This study is about the envisaged Dermatology Virtual Branch Libraries of the National electronic Library for Health. It aims at selecting suitable dermatology Web resources for inclusion in the forthcoming Virtual Branch Libraries after establishing preliminary quality benchmarking rules for this task. Psoriasis, being a common dermatological condition, has been chosen as a starting point. Because quality is a principal concern of the National electronic Library for Health, the study includes a review of the major quality benchmarking systems available today for assessing health-related Web sites. The methodology of developing a quality benchmarking system has been also reviewed. Aided by metasearch Web tools, candidate resources were hand-selected in light of the reviewed benchmarking systems and specific criteria set by the authors. Over 90 professional and patient-oriented Web resources on psoriasis and dermatology in general are suggested for inclusion in the forthcoming Dermatology Virtual Branch Libraries. The idea of an all-in knowledge-hallmarking instrument for the National electronic Library for Health is also proposed based on the reviewed quality benchmarking systems. Skilled, methodical, organized human reviewing, selection and filtering based on well-defined quality appraisal criteria seems likely to be the key ingredient in the envisaged National electronic Library for

  10. Pychometric properties from LibQUAL+ adaptation: A study at mexican universities libraries

    Directory of Open Access Journals (Sweden)

    María del Carmen Toledo Sánchez

    2013-03-01

    Full Text Available Objective. The aim of this study is to develop and validate a specific instrument to assess the service quality of the public university library. Method. The scale was applied to 437users. A self-administered instrument (27 items was designed to measure the service quality perceived by library users. It was submitted for review by a multidisciplinary group of experts who assessed its logical and content validity (Lawshe´s Model. To determine the construct validity, a factor analysis was used with main components and Varimax rotation. Results. Two items were eliminated from the analysis because they showed a low correlation with the total correlation of the scale. The initial main-components analysis revealed four variables with an explained variation of de 63.038%. The scale has good inner validity and consistency. Consequently, final scale was accepted with 25 items. The global rating of the questionnaire had a Cronbach’s alpha of 0.929. Conclusions. It is possible to affirm that the referred instrument is a valid and useful approach to evaluate the service quality of library under this specified context.

  11. Library Systems: FY 1992-2012 Public Libraries Survey Trends (Administrative Entity)

    Data.gov (United States)

    Institute of Museum and Library Services — Find key information on trends in library systems around the United States from FY 1992 to FY 2012.These data include imputed values for libraries that did not...

  12. Multiscale Computing with the Multiscale Modeling Library and Runtime Environment

    NARCIS (Netherlands)

    Borgdorff, J.; Mamonski, M.; Bosak, B.; Groen, D.; Ben Belgacem, M.; Kurowski, K.; Hoekstra, A.G.

    2013-01-01

    We introduce a software tool to simulate multiscale models: the Multiscale Coupling Library and Environment 2 (MUSCLE 2). MUSCLE 2 is a component-based modeling tool inspired by the multiscale modeling and simulation framework, with an easy-to-use API which supports Java, C++, C, and Fortran. We

  13. Directory of Library Automation Software, Systems, and Services. 1998 Edition.

    Science.gov (United States)

    Cibbarelli, Pamela R., Ed.; Cibbarelli, Shawn E., Ed.

    This book includes basic information to locate and compare available options for library automation based on various criteria such as hardware requirements, operating systems, components and applications, and price, and provides the necessary contact information to allow further investigation. The major part of the directory lists 211 software…

  14. FENDL multigroup libraries

    International Nuclear Information System (INIS)

    Ganesan, S.; Muir, D.W.

    1992-01-01

    Selected neutron reaction nuclear data libraries and photon-atomic interaction cross section libraries for elements of interest to the IAEA's program on Fusion Evaluated Nuclear Data Library (FENDL) have been processed into MATXSR format using the NJOY system on the VAX4000 computer of the IAEA. This document lists the resulting multigroup data libraries. All the multigroup data generated are available cost-free upon request from the IAEA Nuclear Data Section. (author). 9 refs

  15. DNA-encoded chemical libraries: advancing beyond conventional small-molecule libraries.

    Science.gov (United States)

    Franzini, Raphael M; Neri, Dario; Scheuermann, Jörg

    2014-04-15

    DNA-encoded chemical libraries (DECLs) represent a promising tool in drug discovery. DECL technology allows the synthesis and screening of chemical libraries of unprecedented size at moderate costs. In analogy to phage-display technology, where large antibody libraries are displayed on the surface of filamentous phage and are genetically encoded in the phage genome, DECLs feature the display of individual small organic chemical moieties on DNA fragments serving as amplifiable identification barcodes. The DNA-tag facilitates the synthesis and allows the simultaneous screening of very large sets of compounds (up to billions of molecules), because the hit compounds can easily be identified and quantified by PCR-amplification of the DNA-barcode followed by high-throughput DNA sequencing. Several approaches have been used to generate DECLs, differing both in the methods used for library encoding and for the combinatorial assembly of chemical moieties. For example, DECLs can be used for fragment-based drug discovery, displaying a single molecule on DNA or two chemical moieties at the extremities of complementary DNA strands. DECLs can vary substantially in the chemical structures and the library size. While ultralarge libraries containing billions of compounds have been reported containing four or more sets of building blocks, also smaller libraries have been shown to be efficient for ligand discovery. In general, it has been found that the overall library size is a poor predictor for library performance and that the number and diversity of the building blocks are rather important indicators. Smaller libraries consisting of two to three sets of building blocks better fulfill the criteria of drug-likeness and often have higher quality. In this Account, we present advances in the DECL field from proof-of-principle studies to practical applications for drug discovery, both in industry and in academia. DECL technology can yield specific binders to a variety of target

  16. The WIMSLIB library - neutron data library for WIMS-D

    International Nuclear Information System (INIS)

    Liu Ping

    1998-05-01

    During a visit to the IAEA Nuclear Data Section from 13 June to 12 December 1997, the author processed the Chinese Evaluated Nuclear Data Library (CENDL), Version 2.1, using the NJOY Nuclear Data Processing System, Version 94.105, to generate the working library WIMSLIB for input to WIMS-D/4 and WIMS-D/5A. The WIMSLIB library was then used to perform benchmark testing of CENDL-2.1. (author)

  17. Isocyanide based multi component reactions in combinatorial chemistry.

    NARCIS (Netherlands)

    Dömling, A.

    1998-01-01

    Although usually regarded as a recent development, the combinatorial approach to the synthesis of libraries of new drug candidates was first described as early as 1961 using the isocyanide-based one-pot multicomponent Ugi reaction. Isocyanide-based multi component reactions (MCR's) markedly differ

  18. Leadership In The Public Library : Case Study In Tenteram City Public Library

    Directory of Open Access Journals (Sweden)

    Muhammad Irsyad Al Fatih

    2018-01-01

    Full Text Available In the formal and informal organization, it is always found someone who is considered more prominent than others, who then appointed or designated as a leader. The Leader of an organization is expected to have leadership qualities, which showed his skills in leading organizations. A leader in the library requires synergy between skills in library management and leadership in general in order to create a good working atmosphere and to encourage the library staff in providing the best services to the patron community. Tenteram City Public library since year of 2018 has never experienced a change of its leader. Research using qualitative approach aimed to identify the leadership of Tenteram City public library leader in developing human resources and library services. Data of this study is gathered through observation and interviews. It is found that the head of the library serves as a role model in imbedding working discipline, he never involved the staff in decision making, the fear of making mistake is the working atmosphere created in the library. The Research found that the head of Tenteram City public library adopts autocratic leadership.

  19. Leadership In The Public Library : Case Study In Tenteram City Public Library

    Directory of Open Access Journals (Sweden)

    Muhammad Irsyad Alfatih

    2017-06-01

    In the formal and informal organization, it is always found someone who is considered more prominent than others, who then appointed or designated as a leader. The Leader of an organization is expected to have leadership qualities, which showed his skills in leading organizations. A leader in the library requires synergy between skills in library management and leadership in general in order to create a good working atmosphere and to encourage the library staff in providing the best services to the patron community. Tenteram City Public library since year of 2018 has never experienced a change of its leader. Research using qualitative approach aimed to identify the leadership of Tenteram City public library leader in developing human resources and library services. Data of this study is gathered through observation and interviews. It is found that the head of the library serves as a role model in imbedding working discipline, he never involved the staff in decision making, the fear of making mistake is the working atmosphere created in the library. The Research found that the head of Tenteram City public library adopts autocratic leadership.

  20. LANL Research Library

    Science.gov (United States)

    Los Alamos National Laboratory The LANL Research Library website has been moved to http ://www.lanl.gov/library/. Please update your bookmarks. If you are not redirected to the new location within 10 http:// | Last Modified: Send email to the Library

  1. The E-rate Program and Libraries and Library Consortia, 2000-2004: Trends and Issues

    Directory of Open Access Journals (Sweden)

    Paul T. Jaeger

    2005-06-01

    Full Text Available The E-rate program has provided tremendous benefits to libraries, allowing many libraries and library systems to acquire technological equipment and services that would otherwise be too expensive, increasing the availability of public Internet access through libraries. This article analyzes the data related to the E-rate program and the discounts that it has provided to libraries and library systems between 2000 and 2004. By examining the E-rate data in a longitudinal manner, this article explores the trends in the application for and the provision of E-rate discounts to libraries and library consortia at national and state levels. The data suggest that, despite a number of controversies over the years, the program has provided a significant level of support for libraries and library consortia.

  2. Study of the mechanical properties of the electric power station components: the punch test

    International Nuclear Information System (INIS)

    Isselin, J.

    2003-03-01

    The aging of the electric production park implies an increasing need of knowledge concerning the evolution of the mechanical properties of its components. With regard to this problem, the availability in material is more and more small. This work proposes to characterize these properties through a mechanical test called Punch test. The main characteristic of this test is to use very small volume samples. The development of this test has been carried out by the study of a 15 MDV 4-05 steel coming from a steam drum of a thermal power plant after 145000 hours of service. At first, we have measured the influence of the parameters of this test. Then, the study has dealt more particularly on the transition temperature of the material. With the finite element simulation method, the strain hardening coefficient of the material has been determined. (O.M.)

  3. Applying DEA Technique to Library Evaluation in Academic Research Libraries.

    Science.gov (United States)

    Shim, Wonsik

    2003-01-01

    This study applied an analytical technique called Data Envelopment Analysis (DEA) to calculate the relative technical efficiency of 95 academic research libraries, all members of the Association of Research Libraries. DEA, with the proper model of library inputs and outputs, can reveal best practices in the peer groups, as well as the technical…

  4. Library Standards: Evidence of Library Effectiveness and Accreditation.

    Science.gov (United States)

    Ebbinghouse, Carol

    1999-01-01

    Discusses accreditation standards for libraries based on experiences in an academic law library. Highlights include the accreditation process; the impact of distance education and remote technologies on accreditation; and a list of Internet sources of standards and information. (LRW)

  5. Female Public Library Patrons Value the Library for Services, Programs, and Technology. A Review of: Fidishun, Dolores. “Women and the Public Library: Using Technology, Using the Library.” Library Trends 56.2 (2007: 328-43.

    Directory of Open Access Journals (Sweden)

    Virginia Wilson

    2009-03-01

    Full Text Available Objective – This study attempts to give insight into why and how women use the public library and information technology, and how they learned to use the technology.Design – Qualitative survey.Setting – The research took place at the Chester County Library in Exton, Pennsylvania, USA.Subjects – One hundred and eighty-four female library patrons 18 years and older.Methods – An anonymous qualitative survey was handed out to all patrons at the ChesterCounty Library 18 years of age and older who came into the library on four separate days and times. Times were chosen to obtain a good representation of library patrons, and included daytime, evening, and weekend hours. The survey consisted of questions about library use, information sought, information seeking behaviour, technology used, and how the respondents learned to use the technology. The surveys were collated and spreadsheets were created that reported answers to yes/no and other data questions. Word documents facilitated the listing of more qualitative answers. The data were analyzed using a thematic content analysis to find themes and patterns that emerged to create grounded theory. In thematic content analysis, “the coding scheme is based on categories designed to capture the dominant themes in a text (Franzosi 184. There is no universal coding scheme, and this method requires extensive pre-testing of the scheme (Franzosi 184. Grounded theory “uses a prescribed set of procedures for analyzing data and constructing a theoretical model” from the data (Leedy and Ormrod 154.Main Results – The survey asked questions about library use, reasons for library use, using technology, finding information, and learning to use online resources. A total of 465 surveys were distributed and 329 were returned. From the surveys returned, 184 were from female patrons, 127 from male patrons, and 18 did not report gender. The data for this article are primarily taken from the 184 female

  6. Medical Students in the United States Reveal Their Ideal Expectations to Help Planners of a New Library

    Directory of Open Access Journals (Sweden)

    Aislinn Conway

    2017-09-01

    Full Text Available A Review of: Aronoff, N. (2016. Surveying medical students to gauge library use and plan for a new medical library. Medical Reference Services Quarterly, 35(2, 187-203. http://dx.doi.org/10.1080/02763869.2016.1152144 Abstract Objective – To help plan for a new library by exploring student use of existing library services and identifying their priorities for the new space. Design – Online survey, sent via email. Setting – Medical school at a university in New York. Subjects – 585 medical students. Methods – The researchers emailed a 45-item online survey to all medical students enrolled at the school. Responses were anonymised and all questions were non-mandatory. Main results – 27% of students (157 out of 585 took part in the survey by answering at least one question. The questions were categorised into the following six topic areas: 1. Use of space and expectations for the new library space: More than half of the participants (67% indicated that they rarely or never came to the library during the academic year in question. Of the students who reported frequenting the library on a daily, weekly, or monthly basis, the majority indicated that they preferred independent study to group study. The following resources were ranked as very important for an ideal library space: sufficient electrical outlets, strong wireless connectivity, printing facilities, individual and quiet study spaces, comfortable seating, online resources, computers, windows/natural light, and group study spaces. Open-ended responses indicated that students desire close proximity to food and beverage services, large study tables to accommodate reading materials and technology, improved opening hours, and satisfactory bathroom facilities. 2. Where medical students study: Of the participants, one third of students reported studying at home, 21% chose to describe the physical characteristics of their place of study rather than name a place, 18% of students studied in

  7. Library Assessment Research: A Content Comparison from Three American Library Journals

    Directory of Open Access Journals (Sweden)

    Ethan J. Allen

    2018-03-01

    Full Text Available Improvement of academic library services as an outcome of continuous assessment is an aim of libraries of higher education institutions. Academic libraries are realizing the need to document evidence of their value to the institutions and the patrons they serve. Publications that include assessment research are reaching library decision makers, who seek to apply evidence to improve services or implement best practices that benefit all stakeholders. Following two previous studies that reported longitudinally on front-line library services, this paper investigates current five-year trending of three prestigious academic library journals in the publication of assessment studies. Data for this study were drawn through a content analysis process, in which the investigators selected studies for inclusion using a set of criteria developed in a pilot exercise. After individually examining 649 research articles, published between 2012 and 2016, 126 met the study’s selection criteria and were categorized according to the type of service they studied. Papers on information literacy instruction dominated, while reference services, technology, and general assessment studies saw less representation in the three journals. This finding reflects the priority placed upon information literacy instruction and describes how three American library journals are responding to current trends across academic libraries.

  8. The alternative library

    OpenAIRE

    Collinson, Timothy; Williams, A.

    2004-01-01

    Much time and effort has been devoted to designing and developing library Web sites that are easy to navigate by both new students and experienced researchers. In a review of the Southampton Institute Library it was decided that in addition to updating the existing homepage an alternative would be offered. Drawing on theory relating to user interface design, learning styles and creative thinking, an Alternative Library navigation system was added to the more traditional library homepage. The ...

  9. Breaking New Ground: The Case for Seed Libraries in the Academic Library

    Science.gov (United States)

    Ingalls, Dana

    2017-01-01

    Seed libraries are a relatively new innovation in the library field, offering seeds, gardening information, and the opportunity for community and ecological engagement to members. While they are increasingly popular in public libraries, they have not yet established a foothold in academic libraries. This paper defines the nature and role of seed…

  10. Shelf life of electronic/electrical devices

    International Nuclear Information System (INIS)

    Polanco, S.; Behera, A.K.

    1993-01-01

    This paper discusses inconsistencies which exist between various industry practices regarding the determination of shelf life for electrical and electronic components. New methodologies developed to evaluate the shelf life of electrical and electronic components are described and numerous tests performed at Commonwealth Edison Company's Central Receiving Inspection and Testing (CRIT) Facility are presented. Based upon testing and analysis using the Arrhenius methodology and typical materials used in the manufacturing of electrical and electronic components, shelf life of these devices was determined to be indefinite. Various recommendations to achieve an indefinite. Various recommendations to achieve an indefinite shelf life are presented to ultimately reduce inventory and operating costs at nuclear power plants

  11. USGS Digital Spectral Library splib06a

    Science.gov (United States)

    Clark, Roger N.; Swayze, Gregg A.; Wise, Richard A.; Livo, K. Eric; Hoefen, Todd M.; Kokaly, Raymond F.; Sutley, Stephen J.

    2007-01-01

    Introduction We have assembled a digital reflectance spectral library that covers the wavelength range from the ultraviolet to far infrared along with sample documentation. The library includes samples of minerals, rocks, soils, physically constructed as well as mathematically computed mixtures, plants, vegetation communities, microorganisms, and man-made materials. The samples and spectra collected were assembled for the purpose of using spectral features for the remote detection of these and similar materials. Analysis of spectroscopic data from laboratory, aircraft, and spacecraft instrumentation requires a knowledge base. The spectral library discussed here forms a knowledge base for the spectroscopy of minerals and related materials of importance to a variety of research programs being conducted at the U.S. Geological Survey. Much of this library grew out of the need for spectra to support imaging spectroscopy studies of the Earth and planets. Imaging spectrometers, such as the National Aeronautics and Space Administration (NASA) Airborne Visible/Infra Red Imaging Spectrometer (AVIRIS) or the NASA Cassini Visual and Infrared Mapping Spectrometer (VIMS) which is currently orbiting Saturn, have narrow bandwidths in many contiguous spectral channels that permit accurate definition of absorption features in spectra from a variety of materials. Identification of materials from such data requires a comprehensive spectral library of minerals, vegetation, man-made materials, and other subjects in the scene. Our research involves the use of the spectral library to identify the components in a spectrum of an unknown. Therefore, the quality of the library must be very good. However, the quality required in a spectral library to successfully perform an investigation depends on the scientific questions to be answered and the type of algorithms to be used. For example, to map a mineral using imaging spectroscopy and the mapping algorithm of Clark and others (1990a, 2003b

  12. NOAA Miami Regional Library > Home

    Science.gov (United States)

    Library Collections Open Access Resources Research Tools E-resources NOAA S. and NOAA N.E. Library Institutional Repository DIVE INTO About the Library | Collections | Research Tools | Library Services & NOAA Miami Regional Library @ AOML & NHC NOAA Miami Regional Library at National Hurricane

  13. Library Feminism and Library Women's History: Activism and Scholarship, Equity and Culture.

    Science.gov (United States)

    Hildenbrand, Suzanne

    2000-01-01

    Discusses the development of library women's history in the context of library feminism and American history. Considers the aftermath of World War II and the Cold War and suggests that the earlier equity or fairness orientation is today challenged by a cultural orientation in both library feminism and library women's history. (Contains 70…

  14. Intelligent Libraries and Apomediators: Distinguishing between Library 3.0 and Library 2.0

    Science.gov (United States)

    Kwanya, Tom; Stilwell, Christine; Underwood, Peter G.

    2013-01-01

    Using the "point oh" naming system for developments in librarianship is attracting debate about its appropriateness, basis and syntax and the meaning and potential of Library 2.0. Now a new term, Library 3.0, has emerged. Is there is any significant difference between the two models? Using documentary analysis to explore the terms, the…

  15. The Personal Virtual Library

    CERN Document Server

    Le Meur, Jean-Yves

    1998-01-01

    Looking for "library" in the usual search engines of the World Wide Web gives: "Infoseek found 3,593,126 pages containing the word library" and it nicely proposes: "Search only within these 3,59 3,126 pages ?" "Yahoo! Found 1299 categories and 8669 sites for library" "LycOs: 1-10 von 512354 relevanten Ergebnissen" "AltaVista: About 14830527 documents match your query" and at the botto m: "Word count: library: 15466897" ! Excite: Top 10 matches and it does not say how many can be browsed... "Library" on the World Wide Web is really popular. At least fiveteen million pages ar e supposed to contain this word. Half of them may have disappeared by now but one more hit will be added once the search robots will have indexed this document ! The notion of Personal Library i s a modest attempt, in a small environment like a library, to give poor users lost in cyber-libraries the opportunity to keep their own private little shelves - virtually. In this paper, we will l ook at the usual functionalities of library systems...

  16. Towards Prognostics for Electronics Components

    Science.gov (United States)

    Saha, Bhaskar; Celaya, Jose R.; Wysocki, Philip F.; Goebel, Kai F.

    2013-01-01

    Electronics components have an increasingly critical role in avionics systems and in the development of future aircraft systems. Prognostics of such components is becoming a very important research field as a result of the need to provide aircraft systems with system level health management information. This paper focuses on a prognostics application for electronics components within avionics systems, and in particular its application to an Isolated Gate Bipolar Transistor (IGBT). This application utilizes the remaining useful life prediction, accomplished by employing the particle filter framework, leveraging data from accelerated aging tests on IGBTs. These tests induced thermal-electrical overstresses by applying thermal cycling to the IGBT devices. In-situ state monitoring, including measurements of steady-state voltages and currents, electrical transients, and thermal transients are recorded and used as potential precursors of failure.

  17. The design and implementation of an infrastructure for multimedia digital libraries

    NARCIS (Netherlands)

    de Vries, A.P.; Eberman, B.; Kovalcin, D.E.

    We develop an infrastructure for managing, indexing and serving multimedia content in digital libraries. This infrastructure follows the model of the web, and thereby is distributed in nature. We discuss the design of the Librarian, the component that manages meta data about the content. The

  18. The Development of E-Library at Delta State University Library, Abraka

    African Journals Online (AJOL)

    The study is on the automation of Delta University Library Abraka. The processes involved in the acquisition of information communication technology equipments to complement the traditional Library Services were stated. Major issues discussed include acquisition of computers hardware and library software, telephone ...

  19. Merchandising Your Library.

    Science.gov (United States)

    Sivulich, Kenneth G.

    1989-01-01

    Discusses library circulation figures as a reflection of the success of library services and describes merchandising techniques that have produced a 137 percent circulation increase at Queens Borough Public Library over the past seven years. Merchandising techniques such as minibranches, displays, signage, dumps, and modified shelving are…

  20. The National electronic library a guide to the future for library managers

    CERN Document Server

    1996-01-01

    The National Information Infrastructure will bring information to the doorstep of every household. Librarianship must respond to this development through the National Electronic Library. Librarianship as a profession must set the information agenda if it is to be a viable and influential entity in the electronic environment. Traditional library services are being redefined by technology, and the concept of the National Electronic Library must combine the roles of the academic institution, public enterprise, and library education. This professional reference is a guide to assist librarians in planning for the future.||The volume maintains that the growing electronic environment is driving a cultural transformation in which libraries must examine and understand what libraries have been, what they are, and what they need to be. Libraries need to participate actively in this transformation in order to remain the central providers of information and related services. The book explores the National Electronic Libra...

  1. News from the Library: Celebrating 20 years of "Library Science Talks"

    CERN Multimedia

    CERN Library

    2014-01-01

    The CERN Library (GS-SIS Group) is promoting activities and initiatives to foster better communication and closer cooperation amongst international librarians and information specialists in the Geneva - Lausanne area.   Great changes that have occurred in the world of information during the last two decades. For this reason, the CERN Library, in cooperation with the Swiss National Library and the Association of International Librarians and Information Specialists (AILIS), sponsors a programme of "Library Science Talks", which consists of six presentations per year given by internationally recognised specialists in the field, providing an opportunity to learn about the trends in our profession. This series of talks was launched in 1995 by Corrado Pettenati, CERN Head Librarian at that time. The idea was that CERN Library staff would benefit from hearing about current projects and products and could then apply some of the ideas to the library. This initiative was&...

  2. Social Science Libraries Section. Special Libraries Division. Papers.

    Science.gov (United States)

    International Federation of Library Associations, The Hague (Netherlands).

    Three papers on the nonconventional literature and social science libraries were presented at the 1983 International Federation of Library Associations (IFLA) conference. In "Grey Material: A Scandinavian View," Birgitta Bergdahl (Sweden) outlines the etymology and meaning of the concept of "grey literature" (which can include…

  3. Special Libraries and Multitype Networks.

    Science.gov (United States)

    Segal, JoAn S.

    1989-01-01

    Describes the history of multitype library networks; examines the reasons why special libraries and other network participants have resisted the inclusion of special libraries in these networks; and discusses the benefits to both special libraries and to other libraries in the network that would result from special library participation. (17…

  4. Growing Competition for Libraries.

    Science.gov (United States)

    Gibbons, Susan

    2001-01-01

    Describes the Questia subscription-based online academic digital books library. Highlights include weaknesses of the collection; what college students want from a library; importance of marketing; competition for traditional academic libraries that may help improve library services; and the ability of Questia to overcome barriers and…

  5. Automating the Small Library.

    Science.gov (United States)

    Skapura, Robert

    1987-01-01

    Discusses the use of microcomputers for automating school libraries, both for entire systems and for specific library tasks. Highlights include available library management software, newsletters that evaluate software, constructing an evaluation matrix, steps to consider in library automation, and a brief discussion of computerized card catalogs.…

  6. Additive Manufacturing of Aerospace Propulsion Components

    Science.gov (United States)

    Misra, Ajay K.; Grady, Joseph E.; Carter, Robert

    2015-01-01

    The presentation will provide an overview of ongoing activities on additive manufacturing of aerospace propulsion components, which included rocket propulsion and gas turbine engines. Future opportunities on additive manufacturing of hybrid electric propulsion components will be discussed.

  7. Authentication System for Electrical Charging of Electrical Vehicles in the Housing Development

    Science.gov (United States)

    Song, Wang-Cheol

    Recently the smart grid has been a hot issue in the research area. The Electric Vehicle (EV) is the most important component in the Smart Grid, having a role of the battery component with high capacity. We have thought how to introduce the EV in the housing development, and for proper operation of the smart grid systems in the housing area the authentication system is essential for the individual houses. We propose an authentication system to discriminate an individual houses, so that the account management component can appropriately operate the electrical charging and billing in the housing estate. The proposed system has an architecture to integrate the charging system outside a house and the monitoring system inside a house.

  8. Planning & Urban Affairs Library Manual.

    Science.gov (United States)

    Knobbe, Mary L., Ed.; Lessel, Janice W., Ed.

    Written especially for persons without a library degree who are operating a small urban study or planning agency library on a part-time basis. Subjects covered are: (1) library function and staff function, duties and training; (2) physical layout and equipment of library; (3) establishing and maintaining the library; (4) library administration;…

  9. The participatory public library

    DEFF Research Database (Denmark)

    Rasmussen, Casper Hvenegaard

    2016-01-01

    of theoretical approaches and practical examples to obtain a varied understanding of user participation in public libraries. Research fields outside library and information science have developed a wide range of theoretical approaches on user participation. Examples from cultural policy, museum studies......Purpose From collection to connection has been a buzzword in the library world for more than a decade. This catchy phrase indicates that users are seen not only as borrowers, but as active participants. The aim of this paper is to investigate and analyse three questions in relation to user...... participation in public libraries in a Nordic perspective. How can participation in public libraries be characterised? Why should libraries deal with user participation? What kinds of different user participation can be identified in public libraries? Design/methodology/approach The paper uses a selection...

  10. Staff development and library services in academic libraries in ...

    African Journals Online (AJOL)

    Staff development and library services in academic libraries in Bayelsa and Delta States. ... Information Impact: Journal of Information and Knowledge Management ... Descriptive survey research design was used for this study, data was ...

  11. A Model Library in Tehran, Iran: The Hosseinieh Ershad Public Library.

    Science.gov (United States)

    Hary, Nicoletta Mattioli

    1995-01-01

    Describes the Hosseinieh Ershad Public Library, a model library established in Iran after the Islamic Revolution that contains a predominant religious collection. Reviews the library's historical background, current cataloging system, collections and their circulation, services to blind patrons and children, funding and staff. Photographs of the…

  12. Reforming Prison Libraries.

    Science.gov (United States)

    Coyle, William J.

    1989-01-01

    Discusses the current widespread acceptance of the public library model for prison libraries, in which preferences of the inmates are the chief consideration in programing and collection development. It is argued that this model results in recreational programs and collections that fail to fulfill the prison library's role in education and…

  13. The Library International Partnerweek 2011

    DEFF Research Database (Denmark)

    Presentation at the Library International Partnerweek, held at Copenhagen Technical Library at the Copenhagen University College of Engineering. Participant: Ms. Carmen Priesto Estravid from Madrid Technical University, E.U.I.T. Obras Públicas, Library. Spain Ms.Tuulikki Hattunen from TUAS Library....... Finland Ms. Anitta Ôrm from Kemi-Tornio UAS Library. Finland Mr. Manfred Walter from HTW-Berlin. Germany Mr. Peter Hald from Copenhagen Technical Library. Denmark Mr. Ole Micahelsen from Copenhagen Technical Library. Denmark...

  14. Library cooperation among academic libraries in Katsina state ...

    African Journals Online (AJOL)

    This study examined Library cooperation among academic libraries in Katsina state. Qualitative research method was adopted in carrying out this study. Interview was used as instrument for data collection. The population comprised of 7 Acquisition librarians from the schools understudy. A descriptive method of da ta ...

  15. Library Design-Facilitated High-Throughput Sequencing of Synthetic Peptide Libraries.

    Science.gov (United States)

    Vinogradov, Alexander A; Gates, Zachary P; Zhang, Chi; Quartararo, Anthony J; Halloran, Kathryn H; Pentelute, Bradley L

    2017-11-13

    A methodology to achieve high-throughput de novo sequencing of synthetic peptide mixtures is reported. The approach leverages shotgun nanoliquid chromatography coupled with tandem mass spectrometry-based de novo sequencing of library mixtures (up to 2000 peptides) as well as automated data analysis protocols to filter away incorrect assignments, noise, and synthetic side-products. For increasing the confidence in the sequencing results, mass spectrometry-friendly library designs were developed that enabled unambiguous decoding of up to 600 peptide sequences per hour while maintaining greater than 85% sequence identification rates in most cases. The reliability of the reported decoding strategy was additionally confirmed by matching fragmentation spectra for select authentic peptides identified from library sequencing samples. The methods reported here are directly applicable to screening techniques that yield mixtures of active compounds, including particle sorting of one-bead one-compound libraries and affinity enrichment of synthetic library mixtures performed in solution.

  16. Libraries and licensing

    Directory of Open Access Journals (Sweden)

    Maja Žumer

    2001-01-01

    Full Text Available In the mid 90s, the abundance of various electronic publications exposed libraries to the problems of licensing electronic content. Various licensing principles have been prepared recently to help libraries in the process; it can be said that in general, the knowledge of licensing issues has improved in libraries of all types. Libraries form consortia in order to gain stronger negotiating positions and obtain better conditions.In the article, new licensing principles are presented in more detail, as well as some domestic and foreign experiences with consortia forming.

  17. Promotion: Study of the Library of the department of library and information science and book

    Directory of Open Access Journals (Sweden)

    Andreja Nagode

    2003-01-01

    Full Text Available The contribution presents basic information about academic libraries and their promotion. Librarians should have promotion knowledge since they have to promote and market their libraries. The paper presents the definition of academic libraries, their purpose, objectives and goals. Marketing and promotion in academic libraries are defined. The history of academic libraries and their promotion are described. The contribution presents results and the interpretation of the research, based on the study of users of the Library of the Department of Library and Information Science and Book studies. A new promotion plan for libraries based on the analysis of the academic library environment is introduced.

  18. Marketing Academic Libraries

    Science.gov (United States)

    Mallon, Melissa, Ed.

    2013-01-01

    Ask any academic librarian if marketing their library and its services is an important task, and the answer will most likely be a resounding "yes!" Particularly in economically troubled times, librarians are increasingly called upon to promote their services and defend their library's worth. Since few academic libraries have in-house marketing…

  19. Electrical field of electrical appliances versus distance: A preliminary analysis

    International Nuclear Information System (INIS)

    Mustafa, Nur Badariah Ahmad; Nordin, Farah Hani; Ismail, Fakaruddin Ali Ahmad; Alkahtani, Ammar Ahmed; Balasubramaniam, Nagaletchumi; Hock, Goh Chin; Shariff, Z A M

    2013-01-01

    Every household electrical appliance that is plugged in emits electric field even if it is not operating. The source where the appliance is plugged into and the components of household electrical appliance contribute to electric field emission. The electric field may cause unknown disturbance to the environment or also affect the human health and the effect might depends on the strength of the electric field emitted by the appliance. This paper will investigate the strength of the electric field emitted by four different electrical appliances using spectrum analyser. The strength will be captured at three different distances; (i) 1m (ii) 2m and (iii) 3m and analysis of the strength of the electrical field is done based on the three different distances. The measurement results show that the strength of the electric field is strongest when it is captured at 1m and the weakest at 3m from the electrical appliance. The results proved that the farther an object is located from the electrical appliance; the less effect the magnetic field has.

  20. Analysis of Personal Digital Library and MyLibrary%"Personal Digital Library"与"MyLibrary"辨析

    Institute of Scientific and Technical Information of China (English)

    秦飞飞

    2011-01-01

    学术界一些研究者认为"Personal Digital Library"与"MyLibrary"均可指个人数字图书馆.然而,两者是不同概念、特征及功能的事物.论文对两者的概念、研究现状及趋势作了详细的论述,旨在揭示这两种事物,为后续研究者提供借鉴.

  1. Characterization of complementary electric field coupled resonant surfaces

    Science.gov (United States)

    Hand, Thomas H.; Gollub, Jonah; Sajuyigbe, Soji; Smith, David R.; Cummer, Steven A.

    2008-11-01

    We present angle-resolved free-space transmission and reflection measurements of a surface composed of complementary electric inductive-capacitive (CELC) resonators. By measuring the reflection and transmission coefficients of a CELC surface with different polarizations and particle orientations, we show that the CELC only responds to in-plane magnetic fields. This confirms the Babinet particle duality between the CELC and its complement, the electric field coupled LC resonator. Characterization of the CELC structure serves to expand the current library of resonant elements metamaterial designers can draw upon to make unique materials and surfaces.

  2. The library marketing toolkit

    CERN Document Server

    Potter, Ned

    2012-01-01

    A guide that offers coverage of various elements of library marketing and branding for different sectors including archives and academic, public and special libraries. It is suitable for those who are involved in promoting their library or information service, whether at an academic, public or special library or in archives or records management.

  3. Library Web Site Administration: A Strategic Planning Model For the Smaller Academic Library

    Science.gov (United States)

    Ryan, Susan M.

    2003-01-01

    Strategic planning provides a useful structure for creating and implementing library web sites. The planned integration of a library's web site into its mission and objectives ensures that the library's community of users will consider the web site one of the most important information tools the library offers.

  4. Flavour components of some processed. fish and fishery products of Japan

    OpenAIRE

    Mansur, M.A.; Hossain, M.I.; Takamuro, H.; Matoba, T.

    2002-01-01

    A study was conducted to examine the flavour components of some processed fish and fishery products of Japan by gas chromatography-mass spectrometry (GC-MS). In brief the method was to absorb the headspace volatiles at 70°C into the fused silica fibre of needle of the solid phase micro extraction fibre. The absorbed components were injected to the GC-MS. The components were identified by computer matching with library database as well as by authentic standard components. In gen...

  5. Component, Context, and Manufacturing Model Library (C2M2L)

    Science.gov (United States)

    2012-11-01

    nickel chloride, sulfate chloride, all sulfate, hard nickel, black nickel, and electroless nickel (used for metal and plastic, requires no electrical... rice husk etc. Table 20includes a list of common abrasive materials and their powders. 65 Approved for public release; distribution...friable abras ive media which i s reusable but less durable that Brown Aluminum Oxide. Uses: For cleaning, peening, and cosmetic finishing

  6. Which educational role can Libraries play in a University learning environment?

    Directory of Open Access Journals (Sweden)

    Alexandra Angeletaki

    2010-07-01

    • • Classroom instruction and observation of skills and technology application proficiencies • Face to face conversation with the students and the faculty members involved in the program. • Web-organised library survey. Project coordinator: Alexandra Angeletaki, University library of Trondheim Email: alexandra.angeletaki@ub.ntnu.no Description: The traditional way of assessing library service quality is to measure the numbers of users and resource materials purchased each year by the library users (Quantitative. But can this type of information help the Library to establish itself as an important educational component, meeting its role in the digital information world with a high academic standard that can influence the research outcome of the faculty it serves. What will the future Library environment be, if one takes in consideration the technological change of the library in place to the library in “Space”? The aim should be to maximise not only the services in numbers as they are easy numeric figures to measure, but in quality that meets the academic requirements of a research Library with educational programs exerting influence on the learning experience of its users. It is consequent then that such a measurement will have to be empowered in order to increase academic literacy and research competence. The University Library of Trondheim has been working the last 2 years in collecting data about the learning process of archaeology students trained in Information literacy workshops in collaboration with the Institute of Archaeology from the University of Trondheim. In 2010 our department introduced the use of reading devices for first year students of two different curriculums Archaeology and Chemistry. Three reading devices were filled up with the texts of the subjects taught and the students that were chosen to participate in the program will be giving at the end of the Spring semester 2010 an account of the use of the reading devices. The overall

  7. The academic library network

    Directory of Open Access Journals (Sweden)

    Jacek Wojciechowski

    2012-01-01

    Full Text Available The efficiency of libraries, academic libraries in particular, necessitates organizational changes facilitating or even imposing co-operation. Any structure of any university has to have an integrated network of libraries, with an appropriate division of work, and one that is consolidated as much as it is possible into medium-size or large libraries. Within thus created network, a chance arises to centralize the main library processes based on appropriate procedures in the main library, highly specialized, more effective and therefore cheaper in operation, including a co-ordination of all more important endeavours and tasks. Hierarchically subordinated libraries can be thus more focused on performing their routine service, more and more frequently providing for the whole of the university, and being able to adjust to changeable requirements and demands of patrons and of new tasks resulting from the new model of the university operation. Another necessary change seems to be a universal implementation of an ov rall programme framework that would include all services in the university’s library networks.

  8. 42 CFR 4.8 - Publication of the Library and information about the Library.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Publication of the Library and information about the Library. 4.8 Section 4.8 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS NATIONAL LIBRARY OF MEDICINE § 4.8 Publication of the Library and information...

  9. Joint-Use Libraries

    Science.gov (United States)

    Casstevens, Susan

    2017-01-01

    The joint-use library is a place where people of all ages, interests, and income levels can find items of interest at no personal cost. The mission of A. H. Meadows Public and High School Library in Midlothian, Texas, is to offer what other public libraries provide: educational and entertainment resources to a community. Yet, the staff also wants…

  10. Beyond Library Power: Reader's Digest Adds Public Libraries to the Mix.

    Science.gov (United States)

    Rockfield, Gary

    1998-01-01

    Describes the Tall Tree Initiative for Library Services, sponsored by the Reader's Digest Foundation and administered by the public and school library systems of Westchester County, New York. The initiative focuses on improving services offered children in the 21st century, and demands a new level of school-public library cooperation. (AEF)

  11. A program for calculating group constants on the basis of libraries of evaluated neutron data

    International Nuclear Information System (INIS)

    Sinitsa, V.V.

    1987-01-01

    The GRUKON program is designed for processing libraries of evaluated neutron data into group and fine-group (having some 300 groups) microscopic constants. In structure it is a package of applications programs with three basic components: a monitor, a command language and a library of functional modules. The first operative version of the package was restricted to obtaining mid-group non-block cross-sections from evaluated neutron data libraries in the ENDF/B format. This was then used to process other libraries. In the next two versions, cross-section table conversion modules and self-shielding factor calculation modules, respectively, were added to the functions already in the package. Currently, a fourth version of the GRUKON applications program package, for calculation of sub-group parameters, is under preparation. (author)

  12. Electric fields in the magnetosphere

    International Nuclear Information System (INIS)

    Falthammar, C.G.

    1989-01-01

    Electric field measurements on the satellites GEOS-1, GEOS-2, ISEE-1, and Viking have extended the empirical knowledge of electric fields in space so as to include the outer regions of the magnetosphere. While the measurements confirm some of the theoretically expected properties of the electric fields, they also reveal unexpected features and a high degree of complexity and variability. The existence of a magnetospheric dawn-to-dusk electric field, as expected on the basis of extrapolation from low altitude measurements, is confirmed in an average sense. However, the actual field exhibits large spatial and temporal variations, including strong fields of inductive origin. At the magnetopause, the average (dawn-to-dusk directed) tangential electric field component is typically obscured by irregular fluctuations of larger amplitude. The magnetic-field aligned component of the electric field, which is of particular importance for ionosphere-magnetosphere coupling and for auroral acceleration, is even now very difficult to measure directly. However, the data from electric field measurements provide further support for the conclusion, based on a variety of evidence, that a non-vanishing magnetic-field aligned electric field exists in the auroral acceleration region

  13. The library was used as Copernicus in Auersperg’s and Lyceal Libraries

    Directory of Open Access Journals (Sweden)

    Stanislav Južnič

    2006-01-01

    Full Text Available We described the beginnings of the Auersperg Prince’s Library of Ljubljana. The special concern was put on the most important bibliophile among the Auerpergs, Volk Engelbert. The work of his friend and librarian, Schönleben, was put in the limelight. We researched the catalogue of Auersperg’s mathematical books, including astronomy and discussed the importance and value of particular items. The library was used as the base for the analysis of Auersperg’s scientific interests just after they returned to the Catholic faith. We also examined their opinion about Copernicus. The contemporary destiny of the Auersperg Prince’s Library was mentioned. In this very moment just some books of the former Ljubljanian library could be traced in different foreign libraries, especially in USA. We discovered the second edition of Copernicus’ De Revolutionibus which National and University Library of Ljubljana inherited from the Ljubljanian Jesuit library. Because of the wrong year written in Cobiss record, this precious treasure was unknown to the researchers up to now.

  14. An improved yeast transformation method for the generation of very large human antibody libraries.

    Science.gov (United States)

    Benatuil, Lorenzo; Perez, Jennifer M; Belk, Jonathan; Hsieh, Chung-Ming

    2010-04-01

    Antibody library selection by yeast display technology is an efficient and highly sensitive method to identify binders to target antigens. This powerful selection tool, however, is often hampered by the typically modest size of yeast libraries (approximately 10(7)) due to the limited yeast transformation efficiency, and the full potential of the yeast display technology for antibody discovery and engineering can only be realized if it can be coupled with a mean to generate very large yeast libraries. We describe here a yeast transformation method by electroporation that allows for the efficient generation of large antibody libraries up to 10(10) in size. Multiple components and conditions including CaCl(2), MgCl(2), sucrose, sorbitol, lithium acetate, dithiothreitol, electroporation voltage, DNA input and cell volume have been tested to identify the best combination. By applying this developed protocol, we have constructed a 1.4 x 10(10) human spleen antibody library essentially in 1 day with a transformation efficiency of 1-1.5 x 10(8) transformants/microg vector DNA. Taken together, we have developed a highly efficient yeast transformation method that enables the generation of very large and productive human antibody libraries for antibody discovery, and we are now routinely making 10(9) libraries in a day for antibody engineering purposes.

  15. International Youth Library

    Directory of Open Access Journals (Sweden)

    Osman Ümit Özen

    1994-03-01

    Full Text Available International Youth Library, the biggest youth library in the world, was founded in 1948 in Munich, Germany, by Jella Lepman. She aimed to unite all the children of the world through books by establishing this library. IYL is still trying to achieve this end supporting scholarship programmes in children’s literature research, participating in or organizing meetings on children’s literature, and working with other national and international organizations deeding with children’s literature. Unfortunately the library is facing some problems recently which have risen from economic difficulties which also inhibits promotional activities.

  16. Library and Education

    Directory of Open Access Journals (Sweden)

    Gheorghe Buluţă

    2011-01-01

    Full Text Available The psycho-social phenomena generated by mass-media and the new information and communication technologies at the level of the young generations have led to new communication practices that bypass libraries and revolutionized the intellectual labor practices, with texts being rather used than read. In this context, our article examines the need to increase the library's role in developing the quality of education and research and brings to attention a few possible solutions which include a partnership between various types of libraries and between librarians' associations and NGOs to facilitate education through library and safeguard reading.

  17. Online Library of Scientific Models, A New Way to Teach, Learn, and Share Learning Experience

    Directory of Open Access Journals (Sweden)

    Hatem H. Elrefaei

    2008-05-01

    Full Text Available While scientific models are usually communicated in paper format, the need to reprogram every model by every user results in a huge loss of efforts, time and money, hence lengthening the educational and research developing cycle and loosing the learning experience and expertise gained by every user. We demonstrate a new portal www.imodelit.com that hosts a library of scientific models for electrical engineers in the form of java applets. They are all conformal, informative, with strong input and output filing system. The software design allows a fast developing cycle and it represents a strong infrastructure that can be shared by researchers to develop their own applets to be posted on the library. We aim for a community based library of scientific models that enhances the e-learning process for engineering students.

  18. Going Green with Electric Vehicles

    Science.gov (United States)

    Deal, Walter F., III

    2010-01-01

    There is considerable interest in electric and hybrid cars because of environmental and climate change concerns, tougher fuel efficiency standards, and increasing dependence on imported oil. In this article, the author describes the history of electric vehicles in the automotive world and discusses the components of a hybrid electric vehicle.…

  19. Comparison of global storm activity rate calculated from Schumann resonance background components to electric field intensity E0 Z

    Science.gov (United States)

    Nieckarz, Zenon; Kułak, Andrzej; Zięba, Stanisław; Kubicki, Marek; Michnowski, Stanisław; Barański, Piotr

    2009-02-01

    This work presents the results of a comparison between the global storm activity rate IRS and electric field intensity E0 Z. The permanent analysis of the IRS may become an important tool for testing Global Electric Circuit models. IRS is determined by a new method that uses the background component of the first 7 Schumann resonances (SR). The rate calculations are based on ELF observations carried out in 2005 and 2006 in the observatory station "Hylaty" of the Jagiellonian University in the Eastern Carpathians (Kułak, A., Zięba, S., Micek, S., Nieckarz, Z., 2003. Solar variations in extremely low frequency propagation parameters: I. A two-dimensional telegraph equation (TDTE) model of ELF propagation and fundamental parameters of Schumann resonances, J. Geophys. Res., 108, 1270, doi:10.1029/2002JA009304). Diurnal runs of the IRS rate were compared with diurnal runs of E0 Z amplitudes registered at the Earth's surface in the Geophysical Observatory of the Polish Academy of Sciences in Świder (Kubicki, M., 2005. Results of Atmospheric Electricity and Meteorological Observations, S. Kalinowski Geophysical Observatory at Świder 2004, Pub. Inst. Geophysics Polish Academy of Sciences, D-68 (383), Warszawa.). The days with the highest values of the correlation coefficient ( R) between amplitudes of both observed parameters characterizing atmosphere electric activity are shown. The seasonal changes of R, IRS and E0 Z are also presented.

  20. MANAGING CHANGE IN ACADEMIC LIBRARY: THE CASE OF VILNIUS UNIVERSITY LIBRARY

    Directory of Open Access Journals (Sweden)

    Marija Prokopčik

    2014-04-01

    Full Text Available ABSTRACTPurpose: The main objective of this article is to ascertain some most significant fields of the academic library activities, which have (or could have an impact on strengthening the library’s role as a partner in academic community, as well as to perform assessment of Vilnius University Library (thereinafter VUL capacities in order to see what kind of current or future activities performed by the library may contribute to the building-up of such role in Vilnius University (thereinafter VU community.Methodology/approach: Analysis of LIS professional literature of the latter five years reveals the key trends in development of academic libraries, their innovative change and challenges – partnerships of open access, managing of research data; research support; research assessment, Library scientific research, as well as allows to perform situation analysis of one particular library in order to see if and at what scale these identified trends can be traced in VUL.Results: It was established that VUL contributes to the idea and practical implementation of open access, collaborates with VU and Lithuania’s academic community in the projects of research data management, takes an active part in carrying out bibliometric research, helps to form a range of research support services, promotes the Library’s scholarly research and contributes to formation of the institution’s research potential.Research limitation: This article focuses on analysis of one academic library (VUL and its activities. Such issues like studies support, library as a space for communication, professional assistance in research events organization, improvement of information and media literacy were deliberately not covered.Originality/practical implications: Identification of common trends and measures of their practical implementation in one particular institution may be useful for other libraries planning the strategy of change and (or implementing selected solutions.

  1. Alternative Fuels Data Center: How Do All-Electric Cars Work?

    Science.gov (United States)

    battery pack to power the electric motor and must be plugged in to a charging station or wall outlet to the typical liquid fuel components, such as a fuel pump, fuel line, or fuel tank. Learn more about electric vehicles. All electric sedan image Key Components of an All-Electric Car Battery (auxiliary): In

  2. Public Relations in Special Libraries.

    Science.gov (United States)

    Rutkowski, Hollace Ann; And Others

    1991-01-01

    This theme issue includes 11 articles on public relations (PR) in special libraries. Highlights include PR at the Special Libraries Association (SLA); sources for marketing research for libraries; developing a library image; sample PR releases; brand strategies for libraries; case studies; publicizing a consortium; and a bibliography of pertinent…

  3. Music Libraries: Centralization versus Decentralization.

    Science.gov (United States)

    Kuyper-Rushing, Lois

    2002-01-01

    Considers the decision that branch libraries, music libraries in particular, have struggled with concerning a centralized location in the main library versus a decentralized collection. Reports on a study of the Association of Research Libraries that investigated the location of music libraries, motivation for the location, degrees offered,…

  4. DIGITAL LIBRARIES IN INDONESIA WITH SPECIAL EMPHASIS TO ACADEMIC LIBRARIES

    OpenAIRE

    Sulistiyo Basuki

    2012-01-01

    There are many definitions about digital library, however, this paper used the definition taken from Digital Library Federation which stated that digital library as organizations that provide the resources, including the specialized staff, to select, structure, offer intellectual access to interpret, distribute, preserve the integrity of, and ensure the persistence over time of collections of digital works so that they are readily and economically available for use by defined community or set...

  5. Selecting and Planning for an Automated Library System: Guidelines for Libraries.

    Science.gov (United States)

    Piccininni, James

    Guidelines are given for automating a library. Issues arising in automation are illustrated through the experience of the Doherty Library of the University of St. Thomas, Houston (Texas). The first step is to decide what type of system is right for the needs of the library and its patrons. In considering vendors of systems, it is important to…

  6. "The Brain" - The Philological Library, Free University of Berlin

    Directory of Open Access Journals (Sweden)

    Klaus U. Werner

    2004-05-01

    Full Text Available In 1997 Lord Norman Foster was commissioned to design a new library building to house the 10 previously separate departmental librariesof the Faculty of Philosophy and Humanities. The new library had to be integrated into the existing Free University building of 1971, which would simultaneously undergo a comprehensive refurbishment. The 'Rostlaube' ('rusty shack' is a typical example of late sixties architecture. It was designed by Candilis, JosicandWoods in a modular griddling system influenced by Le Corbusier. The entire structure now has to be stripped of asbestos, the worn-out façade needs a facelift and the technical infrastructure must be updated to meet present standards. As far as the reconstruction is concerned, Foster has opted to preserve the original state where possible and keep alterations to a minimum. The library is a completely new component, though, for which parts of the existing building had to be removed. The erection of a new library building was necessitated by the intention of bringing together within the 'Rostlaube' 10 separate departments, currently spread all over campus, together with their staff and administrative offices as well as lecture-rooms. At the same time, the departmental libraries are to be integrated into one, which is a completely new departure for the Free University. The collections of the Philological Library cover classical and modern languages and literatures as well as comparative literature and linguistics. The new building will have a capacity of 800,000 volumes on open shelves and desk space for 650 readers. A state-of-the-art energy-saving heating system is included in the overall budget of 18 million Euros, while the cost of shelves and computer equipment is excluded.

  7. Using marketing in Romanian libraries. Study case: The Romanian National Library

    Directory of Open Access Journals (Sweden)

    Ruxandra Irina POPESCU

    2009-06-01

    Full Text Available Nowadays, marketing has become a central part of libraries’ interest worldwide. Their motivation is varied: the missions of organizations have lost compatibility with market demand, budgets are low, while their units require more funds, the increase in the competition for funding, the harsh competition between service suppliers, etc. Furthermore, the Western world understood the necessity of library marketing for reasons like: the support offered in library management, the focus on consumers, the capacity of attracting consumers to use libraries, the improvement of the organization’s image. Despite all that, most Romanian libraries do not understand the part played by marketing in the library or in the information service, as well as its usefulness in day-to-day activities. The purpose of this essay is to present the importance of marketing in the National Romanian Library’s activity.

  8. Distributed multiscale computing with MUSCLE 2, the Multiscale Coupling Library and Environment

    NARCIS (Netherlands)

    Borgdorff, J.; Mamonski, M.; Bosak, B.; Kurowski, K.; Ben Belgacem, M.; Chopard, B.; Groen, D.; Coveney, P.V.; Hoekstra, A.G.

    2014-01-01

    We present the Multiscale Coupling Library and Environment: MUSCLE 2. This multiscale component-based execution environment has a simple to use Java, C++, C, Python and Fortran API, compatible with MPI, OpenMP and threading codes. We demonstrate its local and distributed computing capabilities and

  9. The Readability of Information Literacy Content on Academic Library Web Sites

    Science.gov (United States)

    Lim, Adriene

    2010-01-01

    This article reports on a study addressing the readability of content on academic libraries' Web sites, specifically content intended to improve users' information literacy skills. Results call for recognition of readability as an evaluative component of text in order to better meet the needs of diverse user populations. (Contains 8 tables.)

  10. Potential criticality accident at the General Electric Nuclear Fuel and Component Manufacturing Facility, May 29, 1991

    International Nuclear Information System (INIS)

    1991-08-01

    At the General Electric Nuclear Fuel and Component Manufacturing facility, located near Wilmington, North Carolina, on May 28 and 29, 1991, approximately 150 kilograms of uranium were inadvertently transferred from safe process tanks to an unsafe tank located at the waste treatment facility, thus creating the potential for a localized criticality safety problem. The excess uranium was ultimately safely recovered when the tank contents were centrifuged to remove the uranium-bearing material. Subsequently, the US Nuclear Regulatory Commission dispatched an Incident Investigation Team to determine what happened, to identify probable causes, and to make appropriate findings and conclusions. This report describes the incident, the methodology used by the team in its investigation, and presents the team's findings and conclusions. 48 figs., 8 tabs

  11. Simulation of a heavy-duty diesel engine with electrical turbocompounding system using operating charts for turbocharger components and power turbine

    International Nuclear Information System (INIS)

    Katsanos, C.O.; Hountalas, D.T.; Zannis, T.C.

    2013-01-01

    Highlights: • A diesel model was developed using charts for turbocharger and power turbine. • The maximum value of bsfc improvement is 4.1% at 100% engine load. • The generated electric power ranges from 23 kW to 62 kW. • Turbocharger turbine efficiency decreases slightly with the power turbine speed. • Turbocompounding increases the average pressure value in the exhaust manifold. - Abstract: In diesel engines, approximately 30–40% of the energy supplied by the fuel is rejected to the ambience through exhaust gases. Therefore, there is a potentiality for further considerable increase of diesel engine efficiency with the utilization of exhaust gas heat and its conversion to mechanical or electrical energy. In the present study, the operational behavior of a heavy-duty (HD) diesel truck engine equipped with an electric turbocompounding system is examined on a theoretical basis. The electrical turbocompounding configuration comprised of a power turbine coupled to an electric generator, which is installed downstream to the turbocharger (T/C) turbine. A diesel engine simulation model has been developed using operating charts for both turbocharger and power turbine. A method for introducing the operating charts into the engine model is described thoroughly. A parametric analysis is conducted with the developed simulation tool, where the varying parameter is the rotational speed of power turbine shaft. In this study, the interaction between the power turbine and the turbocharged diesel engine is examined in detail. The effect of power turbine speed on T/C components efficiencies, power turbine efficiency, exhaust pressure and temperature, engine boost pressure and air to fuel ratio is evaluated. In addition, theoretical results for the potential impact of electrical turbocompounding on the generated electric power, net engine power and relative improvement of brake specific fuel consumption (bsfc) are provided. The critical evaluation of the theoretical

  12. Library Use

    DEFF Research Database (Denmark)

    Konzack, Lars

    2012-01-01

    A seminar paper about a survey of role-playing games in public libraries combined with three cases and a presentation of a model.......A seminar paper about a survey of role-playing games in public libraries combined with three cases and a presentation of a model....

  13. ENDL Type Formats for the LLNL Evaluated Atomic Data Library (EADL), Evaluated Electron Data Library (EEDL), and Evaluated Photon Data Library (EPDL)

    International Nuclear Information System (INIS)

    Perkins, S T; Cullen, D E

    2002-01-01

    The character file formats for the Lawrence Livermore National Laboratory evaluated atomic relaxation library (EADL), the electron library (EEDL), and the photon library (EPDL) are given in this report

  14. Study on a self diagnostic monitoring system for an air-operated valve: development of a fault library

    International Nuclear Information System (INIS)

    Chai, Jang Bom; Kim, Yun Chul; Kim, Woo Shik; Cho, Hang Duke

    2004-01-01

    In the interest of nuclear power plant safety, a Self-Diagnostic Monitoring System (SDMS) is needed to monitor defects in safety-related components. An Air-Operated Valve (AOV) is one of the components to be monitored since the failure of its operation could potentially have catastrophic consequences. In this paper, a model of the AOV is developed with the parameters that affect the operational characteristics. The model is useful for both understanding the operation and correlating parameters and defects. Various defects are introduced in the experiments to construct a fault library, which will be used in a pattern recognition approach. Finally, the validity of the fault library is examined

  15. Library/Information Science Education, Placement, and Salaries. Guide to Employment Sources in the Library and Information Professions; Placements and Salaries 2000: Plenty of Jobs, Salaries Flat; Accredited Master's Programs in Library and Information Studies; Library Scholarship Sources; Library Scholarship and Award Recipients, 2001.

    Science.gov (United States)

    Davis, Darlena; Terrell, Tom; Gregory, Vicki L.

    2002-01-01

    Includes five articles that report on employment sources in the library and information professions; placements and salaries, which indicate plenty of jobs and salaries that are flat; accredited master's programs in library and information studies; library scholarship sources; and library scholarship and award recipients. (LRW)

  16. Component fragility research program

    International Nuclear Information System (INIS)

    Tsai, N.C.; Mochizuki, G.L.; Holman, G.S.

    1989-11-01

    To demonstrate how ''high-level'' qualification test data can be used to estimate the ultimate seismic capacity of nuclear power plant equipment, we assessed in detail various electrical components tested by the Pacific Gas ampersand Electric Company for its Diablo Canyon plant. As part of our Phase I Component Fragility Research Program, we evaluated seismic fragility for five Diablo Canyon components: medium-voltage (4kV) switchgear; safeguard relay board; emergency light battery pack; potential transformer; and station battery and racks. This report discusses our Phase II fragility evaluation of a single Westinghouse Type W motor control center column, a fan cooler motor controller, and three local starters at the Diablo Canyon nuclear power plant. These components were seismically qualified by means of biaxial random motion tests on a shaker table, and the test response spectra formed the basis for the estimate of the seismic capacity of the components. The seismic capacity of each component is referenced to the zero period acceleration (ZPA) and, in our Phase II study only, to the average spectral acceleration (ASA) of the motion at its base. For the motor control center, the seismic capacity was compared to the capacity of a Westinghouse Five-Star MCC subjected to actual fragility tests by LLNL during the Phase I Component Fragility Research Program, and to generic capacities developed by the Brookhaven National Laboratory for motor control center. Except for the medium-voltage switchgear, all of the components considered in both our Phase I and Phase II evaluations were qualified in their standard commercial configurations or with only relatively minor modifications such as top bracing of cabinets. 8 refs., 67 figs., 7 tabs

  17. FY 2008 Public Libraries Survey

    Data.gov (United States)

    Institute of Museum and Library Services — Dig into FY 2008 data on public library systems (referred to as administrative entities in the Public Libraries Survey) and main libraries, branches, and bookmobiles...

  18. FY 2010 Public Libraries Survey

    Data.gov (United States)

    Institute of Museum and Library Services — Dig into FY 2010 data on public library systems (referred to as administrative entities in the Public Libraries Survey) and main libraries, branches, and bookmobiles...

  19. FY 2011 Public Libraries Survey

    Data.gov (United States)

    Institute of Museum and Library Services — Dig into FY 2011 data on public library systems (referred to as administrative entities in the Public Libraries Survey) and main libraries, branches, and bookmobiles...

  20. FY 2009 Public Libraries Survey

    Data.gov (United States)

    Institute of Museum and Library Services — Dig into FY 2009 data on public library systems (referred to as administrative entities in the Public Libraries Survey) and main libraries, branches, and bookmobiles...

  1. Library leadership as an issue in Norwegian Library and Information Science education

    OpenAIRE

    Landøy, Ane

    2016-01-01

    In this review of library leadership education given by the two main library schools in Norway, the Oslo and Akershus University College of Applied Sciences (HiOA) and University of Tromsø (UiT), the focus is on the perspective from the library school: Is library leadership something special, or is it similar to other kinds of leadership of public organisations. To what extent is it possible to infer something about the perspective from the course descriptions and the required reading lists?

  2. HTGR nuclear heat source component design and experience

    International Nuclear Information System (INIS)

    Peinado, C.O.; Wunderlich, R.G.; Simon, W.A.

    1982-05-01

    The high-temperature gas-cooled reactor (HTGR) nuclear heat source components have been under design and development since the mid-1950's. Two power plants have been designed, constructed, and operated: the Peach Bottom Atomic Power Station and the Fort St. Vrain Nuclear Generating Station. Recently, development has focused on the primary system components for a 2240-MW(t) steam cycle HTGR capable of generating about 900 MW(e) electric power or alternately producing high-grade steam and cogenerating electric power. These components include the steam generators, core auxiliary heat exchangers, primary and auxiliary circulators, reactor internals, and thermal barrier system. A discussion of the design and operating experience of these components is included

  3. Library Research: A Domain Comparison of Two Library Journals

    Science.gov (United States)

    Davies, Karen; Thiele, Jennifer

    2013-01-01

    Research articles published by the "Community & Junior College Libraries" journal and the "College & Undergraduate Libraries" journal were analyzed to determine their domain. The discussion includes a comparison of past domain studies with the current research. The researchers found the majority of articles (52%) in the…

  4. Electric axle. HV components and system; Elektrische Achse. HV-Komponenten und System

    Energy Technology Data Exchange (ETDEWEB)

    Schermann, Markus [Magna Powertrain, Oberwaltersdorf (Austria). Elektrische Antriebssysteme

    2013-03-15

    Magna Powertrain introduces the system of an electric rear axle drive. The system consists of an electric machine integrated into the gearbox and an appropriate inverter. The system is used to apply power to the rear axle while a conventional combustion engine drives the front axle. This kind of parallel hybrid approach is called ''through-the-road-hybrid'' because the total power of both combustion engine and electric motor is applied through the road at different axles. With this approach, the all-wheel drive functionality is covered as well.

  5. Main Libraries, Branches, and Bookmobiles: FY 1992-2012 Public Libraries Survey Trends (Outlet)

    Data.gov (United States)

    Institute of Museum and Library Services — Find key information on trends in main libraries, branches, and bookmobiles, including FSCS IDs and location.These data include imputed values for libraries that did...

  6. Generation of the WIMS code library from the ENDF/B-VI basic library

    International Nuclear Information System (INIS)

    Aboustta, Mohamed Ali Bashir.

    1994-01-01

    The WIMS code is being presently used in many research centers and educational institutions in the world. It has proven to be versatile, reliable and diverse as it is used to calculate different reactor systems. Its data library is rich of useful information that can even be condensed to serve other codes, but the copy distributed with the code is not updated. Some of its data has never been changed, others had changed many times to accommodate certain experimental setups and some data is, simply, not included. This work is an attempt to dominate the techniques used in generating a multigroup library as being applied to the WIMS data library. This new library is called UFMGLIB. A new set of consistent data was generated from the basic ENDF/B-VI library, including complete data for the fission product nuclides and more elaborated burnup chains. The performance of the library is comparable to that of the Standard library accompanying the code and a later library, WIMKAL 88, generated by a group of the Korean Research Institute of Atomic Energy. (author). 38 refs., 40 figs., 30 tabs

  7. Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Data manual. Part 3: Hardware component failure data; Volume 5, Revision 4

    International Nuclear Information System (INIS)

    Reece, W.J.; Gilbert, B.G.; Richards, R.E.

    1994-09-01

    This data manual contains a hard copy of the information in the Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) Version 3.5 database, which is sponsored by the US Nuclear Regulatory Commission. NUCLARR was designed as a tool for risk analysis. Many of the nuclear reactors in the US and several outside the US are represented in the NUCLARR database. NUCLARR includes both human error probability estimates for workers at the plants and hardware failure data for nuclear reactor equipment. Aggregations of these data yield valuable reliability estimates for probabilistic risk assessments and human reliability analyses. The data manual is organized to permit manual searches of the information if the computerized version is not available. Originally, the manual was published in three parts. In this revision the introductory material located in the original Part 1 has been incorporated into the text of Parts 2 and 3. The user can now find introductory material either in the original Part 1, or in Parts 2 and 3 as revised. Part 2 contains the human error probability data, and Part 3, the hardware component reliability data

  8. CAMPAIGN: an open-source library of GPU-accelerated data clustering algorithms.

    Science.gov (United States)

    Kohlhoff, Kai J; Sosnick, Marc H; Hsu, William T; Pande, Vijay S; Altman, Russ B

    2011-08-15

    Data clustering techniques are an essential component of a good data analysis toolbox. Many current bioinformatics applications are inherently compute-intense and work with very large datasets. Sequential algorithms are inadequate for providing the necessary performance. For this reason, we have created Clustering Algorithms for Massively Parallel Architectures, Including GPU Nodes (CAMPAIGN), a central resource for data clustering algorithms and tools that are implemented specifically for execution on massively parallel processing architectures. CAMPAIGN is a library of data clustering algorithms and tools, written in 'C for CUDA' for Nvidia GPUs. The library provides up to two orders of magnitude speed-up over respective CPU-based clustering algorithms and is intended as an open-source resource. New modules from the community will be accepted into the library and the layout of it is such that it can easily be extended to promising future platforms such as OpenCL. Releases of the CAMPAIGN library are freely available for download under the LGPL from https://simtk.org/home/campaign. Source code can also be obtained through anonymous subversion access as described on https://simtk.org/scm/?group_id=453. kjk33@cantab.net.

  9. Optimization of search algorithms for a mass spectra library

    International Nuclear Information System (INIS)

    Domokos, L.; Henneberg, D.; Weimann, B.

    1983-01-01

    The SISCOM mass spectra library search is mainly an interpretative system producing a ''hit list'' of similar spectra based on six comparison factors. This paper deals with extension of the system; the aim is exact identification (retrieval) of those reference spectra in the SISCOM hit list that correspond to the unknown compounds or components of the mixture. Thus, instead of a similarity measure, a decision (retrieval) function is needed to establish the identity of reference and unknown compounds by comparison of their spectra. To facilitate estimation of the weightings of the different variables in the retrieval function, pattern recognition algorithms were applied. Numerous statistical evaluations of three different library collections were made to check the quality of data bases and to derive appropriate variables for the retrieval function. (Auth.)

  10. Service Innovation In Academic Libraries

    DEFF Research Database (Denmark)

    Scupola, Ada; Nicolajsen, Hanne Westh

    2010-01-01

    Purpose – The purpose of this article is to investigate whether management and employees in academic libraries involve users in library service innovations and what these user roles are. Design/methodology/approach – The article first reviews the literature focusing on innovation, new product...... development, new service development and library science with specific focus on users and management. Subsequently the research uses a case study approach to investigate management and customer involvement in a Danish academic library. Findings – Results from the case study show that academic libraries...... in academic library service innovations on the basis of an in-depth case study of a Danish academic library....

  11. Basic Principles of Electrical Network Reliability Optimization in Liberalised Electricity Market

    Science.gov (United States)

    Oleinikova, I.; Krishans, Z.; Mutule, A.

    2008-01-01

    The authors propose to select long-term solutions to the reliability problems of electrical networks in the stage of development planning. The guide lines or basic principles of such optimization are: 1) its dynamical nature; 2) development sustainability; 3) integrated solution of the problems of network development and electricity supply reliability; 4) consideration of information uncertainty; 5) concurrent consideration of the network and generation development problems; 6) application of specialized information technologies; 7) definition of requirements for independent electricity producers. In the article, the major aspects of liberalized electricity market, its functions and tasks are reviewed, with emphasis placed on the optimization of electrical network development as a significant component of sustainable management of power systems.

  12. Academic Libraries and High-Impact Practices for Student Retention: Library Deans' Perspectives

    Science.gov (United States)

    Murray, Adam

    2015-01-01

    Numerous studies on retention have highlighted the role of student engagement in influencing students' withdrawal decisions. This study seeks to address how academic libraries affect student retention by examining the perception of academic library deans or directors on the alignment between library services and resources with ten nationally…

  13. A borderless Library

    CERN Multimedia

    CERN Library

    2010-01-01

    The CERN Library has a large collection of documents in online or printed format in all disciplines needed by physicists, engineers and technicians. However,  users sometimes need to read documents not available at CERN. But don’t worry! Thanks to its Interlibrary loan and document delivery service, the CERN Library can still help you. Just fill in the online form or email us. We will then locate the document in other institutions and order it for you free of charge. The CERN Library cooperates with the largest libraries in Europe, such as ETH (Eidgenössische Technische Hochschule) in Zurich, TIB (Technische Informationsbibliothek) in Hanover and the British Library in London. Thanks to our network and our expertise in document search, most requests are satisfied in record time: articles are usually served in .pdf version a few hours after the order, and books or other printed materials are delivered within a few days. It is possible to ask for all types of documents suc...

  14. Academic medical libraries' policies and procedures for notifying library users of retracted scientific publications.

    Science.gov (United States)

    Hughes, C

    1998-01-01

    Academic medical libraries have a responsibility to inform library users regarding retracted publications. Many have created policies and procedures that identify flawed journal articles. A questionnaire was sent to the 129 academic medical libraries in the United States and Canada to find out how many had policies and procedures for identifying retracted publications. Of the returned questionnaires, 59% had no policy and no practice for calling the attention of the library user to retracted publications. Forty-one percent of the libraries called attention to retractions with or without a formal policy for doing so. Several responding libraries included their policy statement with the survey. The increasing number of academic medical libraries that realize the importance of having policies and practices in place highlights the necessity for this procedure.

  15. Electrically evoked compound action potentials artefact rejection by independent component analysis: procedure automation.

    Science.gov (United States)

    Akhoun, Idrick; McKay, Colette; El-Deredy, Wael

    2015-01-15

    Independent-components-analysis (ICA) successfully separated electrically-evoked compound action potentials (ECAPs) from the stimulation artefact and noise (ECAP-ICA, Akhoun et al., 2013). This paper shows how to automate the ECAP-ICA artefact cancellation process. Raw-ECAPs without artefact rejection were consecutively recorded for each stimulation condition from at least 8 intra-cochlear electrodes. Firstly, amplifier-saturated recordings were discarded, and the data from different stimulus conditions (different current-levels) were concatenated temporally. The key aspect of the automation procedure was the sequential deductive source categorisation after ICA was applied with a restriction to 4 sources. The stereotypical aspect of the 4 sources enables their automatic classification as two artefact components, a noise and the sought ECAP based on theoretical and empirical considerations. The automatic procedure was tested using 8 cochlear implant (CI) users and one to four stimulus electrodes. The artefact and noise sources were successively identified and discarded, leaving the ECAP as the remaining source. The automated ECAP-ICA procedure successfully extracted the correct ECAPs compared to standard clinical forward masking paradigm in 22 out of 26 cases. ECAP-ICA does not require extracting the ECAP from a combination of distinct buffers as it is the case with regular methods. It is an alternative that does not have the possible bias of traditional artefact rejections such as alternate-polarity or forward-masking paradigms. The ECAP-ICA procedure bears clinical relevance, for example as the artefact rejection sub-module of automated ECAP-threshold detection techniques, which are common features of CI clinical fitting software. Copyright © 2014. Published by Elsevier B.V.

  16. A generic library for large scale solution of PDEs on modern heterogeneous architectures

    DEFF Research Database (Denmark)

    Glimberg, Stefan Lemvig; Engsig-Karup, Allan Peter

    2012-01-01

    Adapting to new programming models for modern multi- and many-core architectures requires code-rewriting and changing algorithms and data structures, in order to achieve good efficiency and scalability. We present a generic library for solving large scale partial differential equations (PDEs......), capable of utilizing heterogeneous CPU/GPU environments. The library can be used for fast proto-typing of PDE solvers, based on finite difference approximations of spatial derivatives in one, two, or three dimensions. In order to efficiently solve large scale problems, we keep memory consumption...... and memory access low, using a low-storage implementation of flexible-order finite difference operators. We will illustrate the use of library components by assembling such matrix-free operators to be used with one of the supported iterative solvers, such as GMRES, CG, Multigrid or Defect Correction...

  17. Library 2020 today's leading visionaries describe tomorrow's library

    CERN Document Server

    Janes, Joseph

    2013-01-01

    Broadly representative of important perspectives and aspects within the profession as well as featuring important voices beyond the professional realm, Library 2020 presents thought-provoking and illuminating visions from many points of view. It is both required reading for library leaders and trustees as well as an ideal supplemental text for LIS classes looking at the future of the profession.

  18. The Elements of Library Research: What Every Student Needs to Know

    Science.gov (United States)

    George, Mary W.

    2008-01-01

    To do solid academic research, college students need to look beyond the computer search engine. This short, practical book introduces students to the important components of the information-seeking process. "The Elements of Library Research" provides a foundation for success in any research assignment, from a freshman paper to a senior thesis.…

  19. Assessing the Warm Glow Effect in Contingent Valuations for Public Libraries

    Science.gov (United States)

    Lee, Soon-Jae; Chung, Hye-Kyung; Jung, Eun-Joo

    2010-01-01

    This article aims to present evidence of the warm glow effect in a public library setting. More specifically, it tests whether individual respondents with different values for the warm glow component report different values for their willingness to pay (WTP). The data come from a contingent valuation survey conducted on randomly selected citizens…

  20. Using geographic information systems to identify prospective marketing areas for a special library.

    Science.gov (United States)

    McConnaughy, Rozalynd P; Wilson, Steven P

    2006-05-04

    The Center for Disability Resources (CDR) Library is the largest collection of its kind in the Southeastern United States, consisting of over 5,200 books, videos/DVDs, brochures, and audiotapes covering a variety of disability-related topics, from autism to transition resources. The purpose of the library is to support the information needs of families, faculty, students, staff, and other professionals in South Carolina working with individuals with disabilities. The CDR Library is funded on a yearly basis; therefore, maintaining high usage is crucial. A variety of promotional efforts have been used to attract new patrons to the library. Anyone in South Carolina can check out materials from the library, and most of the patrons use the library remotely by requesting materials, which are then mailed to them. The goal of this project was to identify areas of low geographic usage as a means of identifying locations for future library marketing efforts. Nearly four years worth of library statistics were compiled in a spreadsheet that provided information per county on the number of checkouts, the number of renewals, and the population. Five maps were created using ArcView GIS software to create visual representations of patron checkout and renewal behavior per county. Out of the 46 counties in South Carolina, eight counties never checked out materials from the library. As expected urban areas and counties near the library's physical location have high usage totals. The visual representation of the data made identification of low usage regions easier than using a standalone database with no visual-spatial component. The low usage counties will be the focus of future Center for Disability Resources Library marketing efforts. Due to the impressive visual-spatial representations created with Geographic Information Systems, which more efficiently communicate information than stand-alone database information can, librarians may benefit from the software's use as a

  1. The presence of academic health sciences libraries on Facebook: the relationship between content and library popularity.

    Science.gov (United States)

    Garcia-Milian, Rolando; Norton, Hannah F; Tennant, Michele R

    2012-01-01

    Social networks such as Facebook allow libraries to be proactive in reaching their users. While some libraries have popular Facebook pages, it remains unclear what attracts users to these pages. This study evaluates relationships between libraries' Facebook page content and popularity. An analysis of 72 academic health sciences libraries' Facebook pages showed positive correlations between number of library fans and number of tabs, photos, events, and wall posts on Facebook. Libraries posting videos had significantly more fans than libraries without them. This study contributes to an understanding of correlations between content and popularity on Facebook, with implications for library outreach.

  2. Electric energy supply systems: description of available technologies

    Energy Technology Data Exchange (ETDEWEB)

    Eisenhauer, J.L.; Rogers, E.A.; King, J.C.; Stegen, G.E.; Dowis, W.J.

    1985-02-01

    When comparing coal transportation with electric transmission as a means of delivering electric power, it is desirable to compare entire energy systems rather than just the transportation/transmission components because the requirements of each option may affect the requirements of other energy system components. PNL's assessment consists of two parts. The first part, which is the subject of this document, is a detailed description of the technical, cost, resource and environmental characteristics of each system component and technologies available for these components. The second part is a computer-based model that PNL has developed to simulate construction and operation of alternative system configurations and to compare the performance of these systems under a variety of economic and technical conditions. This document consists of six chapters and two appendices. A more thorough description of coal-based electric energy systems is presented in the Introduction and Chapter 1. Each of the subsequent chapters describes technologies for five system components: Western coal resources (Chapter 2), coal transportation (Chapter 3), coal gasification and gas transmission (Chapter 4), and electric power transmission (Chapter 6).

  3. Slovenian Public Libraries in 2010

    Directory of Open Access Journals (Sweden)

    Gorazd Vodeb

    2013-09-01

    Full Text Available ABSTRACTPurpose:  The article presents the 2010 Slovenian public library statistics. Performance indicators are compared to library regulations and standards, and to the goals of the Resolution on the 2008-2011 National Programme for Culture. Opening time, library space and equipment, the size of collections and the number of additions are surveyed. Staff structure and financial data are presented as well as the data about visitors, registered members, loans and other library services.   Methodology/approach:  Data collected via the annual statistical survey of Slovenian public libraries are used. They were collected and published by the Library System Development Centre at the National & University Library.   Results:  Data show the stability of the public library income. The level of resources has been generally increased. The number of loans and visits are still rising whereas the number of registered users is slightly dropping. The extent of digitalisation of library materials has been significantly increased.       Research limitation:  The average value of performance indicators is presented.      Originality/practical implications:  Results can be used for monitoring public library development.

  4. Library Information-Processing System

    Science.gov (United States)

    1985-01-01

    System works with Library of Congress MARC II format. System composed of subsystems that provide wide range of library informationprocessing capabilities. Format is American National Standards Institute (ANSI) format for machine-readable bibliographic data. Adaptable to any medium-to-large library.

  5. Coordinators for health science libraries in the Midwest Health Science Library Network.

    Science.gov (United States)

    Holtum, E A; McKloskey, J; Mahan, R

    1977-04-01

    In the summer of 1973 one resource library in each of the six states of the Midwest Health Science Library Network received funding from the National Library of Medicine to hire a coordinator for health science libraries. The development of the role of coordinator is examined and evaluated. The coordinators have proved valuable in the areas of consortium formation, basic unit development, communication facilitation, and program initiation. The function of the coordinators in the extensive planning effort now being undertaken by the network and the future need for the coordinator positions are discussed.

  6. Library Services Funding Assessment

    Science.gov (United States)

    Lorig, Jonathan A.

    2004-01-01

    The Glenn Technical Library is a science and engineering library that primarily supports research activities at the Glenn Research Center, and provides selected services to researchers at all of the NASA research centers. Resources available in the library include books, journals, CD-ROMs, and access to various online sources, as well as live reference and inter-library loan services. The collection contains over 77,000 books, 800,000 research reports, and print or online access to over 1,400 journals. Currently the library operates within the Logistics and Technical Information Division, and is funded as an open-access resource within the GRC. Some of the research units at the GRC have recently requested that the library convert to a "pay-for-services" model, in which individual research units could fund only those journal subscriptions for which they have a specific need. Under this model, the library would always maintain a certain minimum level of pooled-expense services, including the ready reference and book collections, and inter-library loan services. Theoretically the "pay-for-services" model would encourage efficient financial allocation, and minimize the extent to which paid journal subscriptions go unused. However, this model also could potentially negate the benefits of group purchases for journal subscriptions and access. All of the major journal publishers offer package subscriptions that compare favorably in cost with the sum of individual subscription costs for a similar selection of titles. Furthermore, some of these subscription packages are "consortium" purchases that are funded collectively by the libraries at multiple NASA research centers; such consortia1 memberships would be difficult for the library to pay, if enough GRC research units were to withdraw their pooled contributions. cost of collectively-funded journal access with the cost of individual subscriptions. My primary task this summer is to create the cost dataset framework, and

  7. Consumer Health Information Provision in Rural Public Libraries: A Comparison of Two Library Systems

    Science.gov (United States)

    Flaherty, Mary Grace

    2013-01-01

    To better understand health information provision in the public library setting, two cooperative library systems that serve primarily rural populations in upstate New York were studied. The central library in one of those systems established a consumer health information center (CHIC) in 1999. In the other system, the central library does not have…

  8. Users' Satisfaction with Library Services: A Case Study of Delta State University Library

    Science.gov (United States)

    Ikolo, Violet E.

    2015-01-01

    The study focused on users' satisfaction with library services at the Delta State University main Library, Abraka, Delta State. The objective was to find out if users are satisfied with the services, facilities, the library environment, information sources and staff of the library. Using the descriptive survey design, the population for the study…

  9. Interior Design Trends in Libraries.

    Science.gov (United States)

    Sager, Don, Ed.

    2000-01-01

    Four contributing authors discuss perspectives on current trends in library interior design. Articles include: "Trends in Library Furnishings: A Manufacturer's Perspective" (Andrea Johnson); "Libraries, Architecture, and Light: The Architect's Perspective" (Rick McCarthy); "The Library Administrator's Perspective" (Chadwick Raymond); and "The…

  10. Users education in the virtual public library. Resources and procedures in the Spanish public libraries

    Directory of Open Access Journals (Sweden)

    Francisco Javier García Gómez

    2004-01-01

    Full Text Available Some Spanish public libraries have sites Web in a new digital work environment. These libraries are already delivered some services in their virtual branches. We are interesting to analyze user education in their sites Web. We are reviewed and tested some digital resources and services for user education in public libraries at World Wide Web. Level developing obtained in this library work is shown in conclusions. Likewise, we contributed some references about public library web sites design focused in user education and library instruction

  11. Design, synthesis, and evaluation of an alpha-helix mimetic library targeting protein-protein interactions.

    Science.gov (United States)

    Shaginian, Alex; Whitby, Landon R; Hong, Sukwon; Hwang, Inkyu; Farooqi, Bilal; Searcey, Mark; Chen, Jiandong; Vogt, Peter K; Boger, Dale L

    2009-04-22

    The design and solution-phase synthesis of an alpha-helix mimetic library as an integral component of a small-molecule library targeting protein-protein interactions are described. The iterative design, synthesis, and evaluation of the candidate alpha-helix mimetic was initiated from a precedented triaryl template and refined by screening the designs for inhibition of MDM2/p53 binding. Upon identifying a chemically and biologically satisfactory design and consistent with the screening capabilities of academic collaborators, the corresponding complete library was assembled as 400 mixtures of 20 compounds (20 x 20 x 20-mix), where the added subunits are designed to mimic all possible permutations of the naturally occurring i, i + 4, i + 7 amino acid side chains of an alpha-helix. The library (8000 compounds) was prepared using a solution-phase synthetic protocol enlisting acid/base liquid-liquid extractions for purification on a scale that insures its long-term availability for screening campaigns. Screening of the library for inhibition of MDM2/p53 binding not only identified the lead alpha-helix mimetic upon which the library was based, but also suggests that a digestion of the initial screening results that accompany the use of such a comprehensive library can provide insights into the nature of the interaction (e.g., an alpha-helix mediated protein-protein interaction) and define the key residues and their characteristics responsible for recognition.

  12. The impact of the economic crisis on Spanish university libraries

    Directory of Open Access Journals (Sweden)

    Simón-Martín, José

    2016-09-01

    Full Text Available The scope of this study is to examine the impact of the financial crisis on the libraries of Spanish public universities. For this purpose, data from staff, finances, and services provided by the 47 public university libraries during 2008-2014 have been analyzed. Overall, the analysis of the data leads us to assert the following observations: these libraries have experienced a reduction in staff and expenditures for the purchase of information resources, whereas the volume of library lending has matched the evolution of student enrollment. Both interlibrary lending and the number of days that libraries were open during this period have decreased. Expenditures on electronic resources made by libraries and library consortia have increased in the period under study to the detriment of expenditures on monographs and printed journals. In this new economic environment, we consider that library managers should design actions for establishing strategies to ensure efficient and high-quality services to users.El presente trabajo tiene como objetivo examinar el impacto de la crisis financiera en las bibliotecas de las universidades públicas españolas. Para alcanzar este propósito se han analizado los datos de personal, los datos económicos, y los referidos a los servicios prestados por las 47 bibliotecas universitarias públicas durante el periodo 2008 a 2014. El análisis de los datos nos lleva a aseverar, a nivel global, las siguientes consideraciones: estas bibliotecas han experimentado una reducción en los efectivos de personal y en los gastos de adquisiciones de recursos de información, mientras que el volumen del préstamo domiciliario ha seguido una evolución similar al del número de estudiantes matriculados. Tanto el préstamo interbibliotecario como el número de días que permanecieron abiertas las bibliotecas durante estos años también han disminuido. El gasto en recursos electrónicos, realizado por las bibliotecas y los consorcios

  13. Technostress and Library Values.

    Science.gov (United States)

    Gorman, Michael

    2001-01-01

    Discusses information overload and society's and libraries' responses to technology. Considers eight values that libraries should focus on and how they relate to technology in libraries: democracy, stewardship, service, intellectual freedom, privacy, rationalism, equity of access, and building harmony and balance. (LRW)

  14. Incorporating Library School Interns on Academic Library Subject Teams

    Science.gov (United States)

    Sargent, Aloha R.; Becker, Bernd W.; Klingberg, Susan

    2011-01-01

    This case study analyzes the use of library school interns on subject-based teams for the social sciences, humanities, and sciences in the San Jose State University Library. Interns worked closely with team librarians on reference, collection development/management, and instruction activities. In a structured focus group, interns reported that the…

  15. The Cost of Library Services: Activity-Based Costing in an Australian Academic Library.

    Science.gov (United States)

    Robinson, Peter; Ellis-Newman, Jennifer

    1998-01-01

    Explains activity-based costing (ABC), discusses the benefits of ABC to library managers, and describes the steps involved in implementing ABC in an Australian academic library. Discusses the budgeting process in universities, and considers benefits to the library. (Author/LRW)

  16. TRSkit: A Simple Digital Library Toolkit

    Science.gov (United States)

    Nelson, Michael L.; Esler, Sandra L.

    1997-01-01

    This paper introduces TRSkit, a simple and effective toolkit for building digital libraries on the World Wide Web. The toolkit was developed for the creation of the Langley Technical Report Server and the NASA Technical Report Server, but is applicable to most simple distribution paradigms. TRSkit contains a handful of freely available software components designed to be run under the UNIX operating system and served via the World Wide Web. The intended customer is the person that must continuously and synchronously distribute anywhere from 100 - 100,000's of information units and does not have extensive resources to devote to the problem.

  17. PCA Fault Feature Extraction in Complex Electric Power Systems

    Directory of Open Access Journals (Sweden)

    ZHANG, J.

    2010-08-01

    Full Text Available Electric power system is one of the most complex artificial systems in the world. The complexity is determined by its characteristics about constitution, configuration, operation, organization, etc. The fault in electric power system cannot be completely avoided. When electric power system operates from normal state to failure or abnormal, its electric quantities (current, voltage and angles, etc. may change significantly. Our researches indicate that the variable with the biggest coefficient in principal component usually corresponds to the fault. Therefore, utilizing real-time measurements of phasor measurement unit, based on principal components analysis technology, we have extracted successfully the distinct features of fault component. Of course, because of the complexity of different types of faults in electric power system, there still exists enormous problems need a close and intensive study.

  18. Tomorrow's Library: The American View.

    Science.gov (United States)

    Dempsey, Mary A.

    1998-01-01

    Explores the continuing role of the public library in society, discussing the mission of the library (highlights the Chicago Public Library's new mission statement), funding collections and buildings, technology, capital improvements, challenges to intellectual freedom, librarian education, library outreach, and private-sector partnerships. (PEN)

  19. Library resources on the Internet

    Science.gov (United States)

    Buchanan, Nancy L.

    1995-07-01

    Library resources are prevalent on the Internet. Library catalogs, electronic books, electronic periodicals, periodical indexes, reference sources, and U.S. Government documents are available by telnet, Gopher, World Wide Web, and FTP. Comparatively few copyrighted library resources are available freely on the Internet. Internet implementations of library resources can add useful features, such as full-text searching. There are discussion lists, Gophers, and World Wide Web pages to help users keep up with new resources and changes to existing ones. The future will bring more library resources, more types of library resources, and more integrated implementations of such resources to the Internet.

  20. Architectural Optimization of Digital Libraries

    Science.gov (United States)

    Biser, Aileen O.

    1998-01-01

    This work investigates performance and scaling issues relevant to large scale distributed digital libraries. Presently, performance and scaling studies focus on specific implementations of production or prototype digital libraries. Although useful information is gained to aid these designers and other researchers with insights to performance and scaling issues, the broader issues relevant to very large scale distributed libraries are not addressed. Specifically, no current studies look at the extreme or worst case possibilities in digital library implementations. A survey of digital library research issues is presented. Scaling and performance issues are mentioned frequently in the digital library literature but are generally not the focus of much of the current research. In this thesis a model for a Generic Distributed Digital Library (GDDL) and nine cases of typical user activities are defined. This model is used to facilitate some basic analysis of scaling issues. Specifically, the calculation of Internet traffic generated for different configurations of the study parameters and an estimate of the future bandwidth needed for a large scale distributed digital library implementation. This analysis demonstrates the potential impact a future distributed digital library implementation would have on the Internet traffic load and raises questions concerning the architecture decisions being made for future distributed digital library designs.

  1. Pelvic floor muscle exercises with or without electric stimulation and post-prostectomy urinary incontinence: a systematic review

    Directory of Open Access Journals (Sweden)

    Patrícia Zaidan

    Full Text Available Abstract Introduction: Urinary incontinence (UI after prostatectomy is difficult to treat and causes profound adverse impacts on the individual's quality of life. The main clinical treatments available for post-prostatectomy UI consist of behavioral techniques and physical therapy techniques, such as exercises, electrical stimulation and biofeedback for pelvic floor muscles (PFMs. Objective: To investigate the effectiveness of PFM exercises with or without electrical stimulation for reducing post-prostatectomy UI. Methods: We included only randomized controlled trials (RCTs which used PFM exercises with or without electrical stimulation. The search was conducted in August of 2013 in the databases of the U.S. National Library of Medicine (MEDLINE, Scientific Electronic Library Online (SciELO, Physiotherapy Evidence Database (PEDro and Virtual Health Library (VHL. We searched for RCTs published between 1999 and 2013. As keywords for our search, we used the following descriptors from the Health Sciences Descriptors (DeCS: urinary incontinence, pelvic diaphragm, prostatectomy, pelvic floor exercises, electrostimulation and electrical stimulation. We also used the following descriptors from the Medical Subject Headings (MeSH: electrical stimulation, pelvic floor, urinary incontinence, prostatectomy, physiotherapy and exercise therapy. Results: Of the 59 RCTs found, 26 were excluded as duplicates, and 28 were excluded for not displaying a minimum score of 5.0 on the PEDro Scale, which left us with five RCTs. Conclusion: PFM exercises can be effective for treating UI after radical prostatectomy, especially if begun soon after surgery. Associating electrical stimulation with PFM exercises did not show additional benefit for treating urinary incontinence. However, the selected studies presented some methodological weaknesses that may have compromised their internal validity.

  2. KAERI photonuclear library

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Jong Hwa; Lee, Young Ouk; Han, Yin Iu

    2000-03-01

    This report contains summary information and figures depicting the KAERI photonuclear data library that extends up to 140 MeV of incident photon. The library consists of 143 isotopes from C-12 to Bi-209, providing the photoabsorption cross section and the emission spectra for neutron, proton, deuteron, triton, alpha particles, and all residual nuclides in ENDF6 format. The contents of this report and ENDF-6 format data library are available at http://atom.kaeri.re.kr/.

  3. A Constitution for Danish Libraries.

    Science.gov (United States)

    Nielsen, O. Perch

    This overview of the history of legislation governing the Danish library system from 1920 to the present: describes the various kinds of libraries in Denmark, explores the current controversies surrounding the roles of several supervisory library bodies, and details recent recommendations of the Danish Library Commission. (FM)

  4. Virtual Libraries: Service Realities.

    Science.gov (United States)

    Novak, Jan

    2002-01-01

    Discussion of changes in society that have resulted from information and communication technologies focuses on changes in libraries and a new market for library services with new styles of clients. Highlights client service issues to be considered when transitioning to a virtual library situation. (Author/LRW)

  5. The Steacie Library Dungeon Hackfest: Hackers in the Library Coding, Collaborating and Creating

    Directory of Open Access Journals (Sweden)

    Sarah Shujah

    2013-12-01

    Full Text Available The Steacie Science and Engineering Library at York University hosted its first annual Steacie Library Dungeon Hackfest in February 2013. The purpose of a hackfest is to spend a day (or longer using computer programming skills to collaborate on a particular software project and, hopefully, bring the project to reality. The project may be an app, widget, or website. It is evident that hackfests, as a form of engaged learning, help to reinforce the relevance of the library since it has implications for information literacy, open access, faculty liaison, and the changing perception of library as place. Twenty-five participants that included students, faculty, and staff hacked on Open York Data: York University’s openly accessible records and data such as course codes, lab stats of computers available in various libraries, subject headings, and research interests of faculty. The Hackfest produced several innovative ideas including a “Class Optimizer” program to help students generate a course schedule, and a mobile android app “YU Labs” that informs students of the computers available in a specific library. Library instruction was informally imparted during the Hackfest. There were discussions about open source, developing a research idea, and recommended tools to help students complete their projects. This article encapsulates the inspiration behind the Hackfest, discusses the library as the host, the resources used, the theme, achievements, and assessment. To summarize, the library Hackfest provided a space for literacy, life-long learning, and support of the open source pedagogy.

  6. Analysis of Environmental Friendly Library Based on the Satisfaction and Service Quality: study at Library “X”

    Science.gov (United States)

    Herdiansyah, Herdis; Satriya Utama, Andre; Safruddin; Hidayat, Heri; Gema Zuliana Irawan, Angga; Immanuel Tjandra Muliawan, R.; Mutia Pratiwi, Diana

    2017-10-01

    One of the factor that influenced the development of science is the existence of the library, which in this case is the college libraries. Library, which is located in the college environment, aims to supply collections of literatures to support research activities as well as educational for students of the college. Conceptually, every library now starts to practice environmental principles. For example, “X” library as a central library claims to be an environmental friendly library for practicing environmental friendly management, but the X library has not inserted the satisfaction and service aspect to the users, including whether it is true that environmental friendly process is perceived by library users. Satisfaction can be seen from the comparison between expectations and reality of library users. This paper analyzes the level of library user satisfaction with library services in the campus area and the gap between expectations and reality felt by the library users. The result of the research shows that there is a disparity between the hope of library management, which is sustainable and environmentally friendly with the reality in the management of the library, so that it has not given satisfaction to the users yet. The gap value of satisfaction that has the biggest difference is in the library collection with the value of 1.57; while for the smallest gap value is in the same service to all students with a value of 0.67.

  7. Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Guide to data processing and revision: Part 3, Hardware component failure data entry and revision procedures

    International Nuclear Information System (INIS)

    Gilmore, W.E.; Gertman, D.I.; Gilbert, B.G.; Reece, W.J.

    1988-11-01

    The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability (HEP) and hardware component failure data (HCFD). The NUCLARR system software resides on an IBM (or compatible) personal micro-computer. Users can perform data base searches to furnish HEP estimates and HCFD rates. In this manner, the NUCLARR system can be used to support a variety of risk assessment activities. This volume, Volume 3 of a 5-volume series, presents the procedures used to process HEP and HCFD for entry in NUCLARR and describes how to modify the existing NUCLARR taxonomy in order to add equipment types of action verbs. Volume 3 also specifies the various roles of the administrative staff on assignment to the NUCLARR Clearinghouse who are tasked with maintaining the data base, dealing with user requests, and processing NUCLARR data

  8. Library Anxiety As A Great Barrier Before Effective Library Use: A General Appraisal

    Directory of Open Access Journals (Sweden)

    Erol Yılmaz

    2011-09-01

    Full Text Available Library anxiety is a subject which has been searched in international platform in its various dimensions since 1986 in which the concept was first defined. On the other hand, this important subject, in the context of this article, as of the end of 2010 year in which we concluded literature survey, has never been handled and studied on in the scope of Turkish Librarianship.2 Main purpose of this study which is the first article in which library anxiety is studied as an independent subject in the scope of Turkish Librarianship is to draw attention to the subject of library anxiety which is a great barrier for the users before the high level satisfaction relating to the library services, who are the existence reason of the libraries andfurthermore is to handle the studies prepared in the past on this subject under a general approach. Furthermore in this study, studies close to the subject in the Turkish Librarianship were handled and a general appraisal was made on the subject. At the final part of the study, place was given to some proposals which are directed towards the discussion of library anxiety in theoretical dimension within the scope of Turkish Librarianship and furthermore some proposals which are aimed to prevent and eliminate the formation of library anxiety in the users during the application (operation of the library are given place.

  9. Bosch automotive electrics and automotive electronics systems and components, networking and hybrid drive

    CERN Document Server

    2014-01-01

    The significance of electrical and electronic systems has increased considerably in the last few years and this trend is set to continue. The characteristics feature of innovative systems is the fact that they can work together in a network. This requires powerful bus systems that the electronic control units can use to exchange information. Networking and the various bus systems used in motor vehicles are the prominent new topic in the 5th edition of the "Automotive Electric, Automotive Electronics" technical manual. The existing chapters have also been updated, so that this new edition brings the reader up to date on the subjects of electrical and electronic systems in the motor vehicle. Content Electrical and electronical systems – Basic principles of networking - Examples of networked vehicles – Bus systems – Architecture of electronic systems – Mechatronics – Elektronics – Electronic control Units – Software – Sensors – Actuators – Hybrid drives – Vehicle electrical system – Start...

  10. Public library – a lifelong learning opportunity. Activities for adults in the Tolmin public library

    Directory of Open Access Journals (Sweden)

    Jožica Štendler

    2010-12-01

    Full Text Available The Libraries Act (2001 steered the development of general library services towards organising lifelong learning activities, fostering reading culture and organising cultural events. Smaller libraries in particular strive in their local environments to become information-education centres and meeting places. The paper presents the activities through which the Ciril Kosmač Library in Tolmin attempts to satisfy the intellectual and cultural needs of its adult users. The example of a small library shows that the cultural mission and educational function are directly linked and intertwined with the social role of libraries in the lives of individuals and the local community.

  11. Main Libraries, Branches, and Bookmobiles: FY 2012 Public Libraries Survey (Outlet)

    Data.gov (United States)

    Institute of Museum and Library Services — Find key information on main libraries, branches, and bookmobiles, including FSCS IDs, square footage, and locale codes.These data include imputed values for...

  12. The Lanchester Library — Building a Sustainable Library

    Directory of Open Access Journals (Sweden)

    Pat Noon

    2008-09-01

    Full Text Available The award winning Lanchester Library is the largest deep plan naturally ventilated building in Europe and has consistently delivered significant energy savings compared to air conditioned buildings. The article provides some background to the design and explains the sustainable features of the building as well as describing how flexibility was built into the building to enable the library service to evolve in response to changing user needs.

  13. Israeli Special Libraries

    Science.gov (United States)

    Foster, Barbara

    1974-01-01

    Israel is sprinkled with a noteworthy representation of special libraries which run the gamut from modest kibbutz efforts to highly technical scientific and humanities libraries. A few examples are discussed here. (Author/CH)

  14. The library of the Royal Society of Physicians in Budapest becomes today's Semmelweis Medical History Library.

    Science.gov (United States)

    Kaproncszay, Katalin; Magyar, László András; Putnam, Constance E

    2011-01-01

    The 170-year history of the library of the Royal Society of Medicine in Budapest illustrates both that political and cultural context matter and that "medical" libraries, if they survive, in due course become primarily "medical history" libraries. Two of the authors are on the staff of the Semmelweis Medical History Library; the third is a US scholar who makes frequent use of the library. Together, they avail themselves of archival and published materials-and personal experience with the collection-to establish the context that produced the original library, trace its evolution, and describe its present-day incarnation. A tale of transformation emerges that reflects how collections are likely to change. The authors present events and individuals in the life of the Royal Society's library and paint a picture of the value of today's Semmelweis Medical History Library. Unique treasures in the collection are described. The story told here is of how a particular nineteenth-century library became a twenty-first-century institution. The authors establish its peculiarly Hungarian context and potential value to librarians and historians from outside Hungary. The overall message is that general medical libraries everywhere are perforce likely to become medical historical libraries over time.

  15. Novel Zn2+-chelating peptides selected from a fimbria-displayed random peptide library

    DEFF Research Database (Denmark)

    Kjærgaard, Kristian; Schembri, Mark; Klemm, Per

    2001-01-01

    The display of peptide sequences on the surface of bacteria is a technology that offers exciting applications in biotechnology and medical research. Type 1 fimbriae are surface organelles of Escherichia coli which mediate D-mannose-sensitive binding to different host surfaces by virtue of the Fim......H adhesin. FimH is a component of the fimbrial organelle that can accommodate and display a diverse range of peptide sequences on the E. coli cell surface. In this study we have constructed a random peptide library in FimH. The library, consisting of similar to 40 million individual clones, was screened...

  16. THE TERMINOLOGY OF LIBRARY SCIENCE

    OpenAIRE

    Љиљана Матић

    2014-01-01

    The master’s thesis entitled The Terminology of Library Science presents the general state of the terminology of library science in the Serbian language and analyses the terminological system which was formed in the last couple of decades in relation to library and information science. The terminology of library science is seen as a characteristic of professional language. The research is conducted on a corpus which excludes sources relating extremely to either library science or information ...

  17. Marketing and health libraries.

    Science.gov (United States)

    Wakeham, Maurice

    2004-12-01

    To present an overview of the concepts of marketing and to examine ways in which they can be applied to health libraries. A review was carried out of literature relating to health libraries using LISA, CINAHL, BNI and Google. Marketing is seen as a strategic management activity aimed at developing customer relationships. Concepts such as the 'four Ps' (product, price, place and promotion), marketing plans, the marketing mix, segmentation, promotion and evaluation are identified and discussed in relation to health libraries. In increasingly complex health service and information environments, the marketing and promotion of library services is becoming more important if those services are to justify the resources given to them. Marketing techniques are equally applicable to physical and digital library services.

  18. Initial Ada components evaluation

    Science.gov (United States)

    Moebes, Travis

    1989-01-01

    The SAIC has the responsibility for independent test and validation of the SSE. They have been using a mathematical functions library package implemented in Ada to test the SSE IV and V process. The library package consists of elementary mathematical functions and is both machine and accuracy independent. The SSE Ada components evaluation includes code complexity metrics based on Halstead's software science metrics and McCabe's measure of cyclomatic complexity. Halstead's metrics are based on the number of operators and operands on a logical unit of code and are compiled from the number of distinct operators, distinct operands, and total number of occurrences of operators and operands. These metrics give an indication of the physical size of a program in terms of operators and operands and are used diagnostically to point to potential problems. McCabe's Cyclomatic Complexity Metrics (CCM) are compiled from flow charts transformed to equivalent directed graphs. The CCM is a measure of the total number of linearly independent paths through the code's control structure. These metrics were computed for the Ada mathematical functions library using Software Automated Verification and Validation (SAVVAS), the SSE IV and V tool. A table with selected results was shown, indicating that most of these routines are of good quality. Thresholds for the Halstead measures indicate poor quality if the length metric exceeds 260 or difficulty is greater than 190. The McCabe CCM indicated a high quality of software products.

  19. The CERN Library

    CERN Multimedia

    Hester, Alec G

    1968-01-01

    Any advanced research centre needs a good Library. It can be regarded as a piece of equipment as vital as any machine. At the present time, the CERN Library is undergoing a number of modifications to adjust it to the changing scale of CERN's activities and to the ever increasing flood of information. This article, by A.G. Hester, former Editor of CERN COURIER who now works in the Scientific Information Service, describes the purposes, methods and future of the CERN Library.

  20. Enterprise Reference Library

    Science.gov (United States)

    Bickham, Grandin; Saile, Lynn; Havelka, Jacque; Fitts, Mary

    2011-01-01

    Introduction: Johnson Space Center (JSC) offers two extensive libraries that contain journals, research literature and electronic resources. Searching capabilities are available to those individuals residing onsite or through a librarian s search. Many individuals have rich collections of references, but no mechanisms to share reference libraries across researchers, projects, or directorates exist. Likewise, information regarding which references are provided to which individuals is not available, resulting in duplicate requests, redundant labor costs and associated copying fees. In addition, this tends to limit collaboration between colleagues and promotes the establishment of individual, unshared silos of information The Integrated Medical Model (IMM) team has utilized a centralized reference management tool during the development, test, and operational phases of this project. The Enterprise Reference Library project expands the capabilities developed for IMM to address the above issues and enhance collaboration across JSC. Method: After significant market analysis for a multi-user reference management tool, no available commercial tool was found to meet this need, so a software program was built around a commercial tool, Reference Manager 12 by The Thomson Corporation. A use case approach guided the requirements development phase. The premise of the design is that individuals use their own reference management software and export to SharePoint when their library is incorporated into the Enterprise Reference Library. This results in a searchable user-specific library application. An accompanying share folder will warehouse the electronic full-text articles, which allows the global user community to access full -text articles. Discussion: An enterprise reference library solution can provide a multidisciplinary collection of full text articles. This approach improves efficiency in obtaining and storing reference material while greatly reducing labor, purchasing and

  1. Research data management and libraries: relationships, activities, drivers and influences.

    Directory of Open Access Journals (Sweden)

    Stephen Pinfield

    Full Text Available The management of research data is now a major challenge for research organisations. Vast quantities of born-digital data are being produced in a wide variety of forms at a rapid rate in universities. This paper analyses the contribution of academic libraries to research data management (RDM in the wider institutional context. In particular it: examines the roles and relationships involved in RDM, identifies the main components of an RDM programme, evaluates the major drivers for RDM activities, and analyses the key factors influencing the shape of RDM developments. The study is written from the perspective of library professionals, analysing data from 26 semi-structured interviews of library staff from different UK institutions. This is an early qualitative contribution to the topic complementing existing quantitative and case study approaches. Results show that although libraries are playing a significant role in RDM, there is uncertainty and variation in the relationship with other stakeholders such as IT services and research support offices. Current emphases in RDM programmes are on developments of policies and guidelines, with some early work on technology infrastructures and support services. Drivers for developments include storage, security, quality, compliance, preservation, and sharing with libraries associated most closely with the last three. The paper also highlights a 'jurisdictional' driver in which libraries are claiming a role in this space. A wide range of factors, including governance, resourcing and skills, are identified as influencing ongoing developments. From the analysis, a model is constructed designed to capture the main aspects of an institutional RDM programme. This model helps to clarify the different issues involved in RDM, identifying layers of activity, multiple stakeholders and drivers, and a large number of factors influencing the implementation of any initiative. Institutions may usefully benchmark their

  2. Research data management and libraries: relationships, activities, drivers and influences.

    Science.gov (United States)

    Pinfield, Stephen; Cox, Andrew M; Smith, Jen

    2014-01-01

    The management of research data is now a major challenge for research organisations. Vast quantities of born-digital data are being produced in a wide variety of forms at a rapid rate in universities. This paper analyses the contribution of academic libraries to research data management (RDM) in the wider institutional context. In particular it: examines the roles and relationships involved in RDM, identifies the main components of an RDM programme, evaluates the major drivers for RDM activities, and analyses the key factors influencing the shape of RDM developments. The study is written from the perspective of library professionals, analysing data from 26 semi-structured interviews of library staff from different UK institutions. This is an early qualitative contribution to the topic complementing existing quantitative and case study approaches. Results show that although libraries are playing a significant role in RDM, there is uncertainty and variation in the relationship with other stakeholders such as IT services and research support offices. Current emphases in RDM programmes are on developments of policies and guidelines, with some early work on technology infrastructures and support services. Drivers for developments include storage, security, quality, compliance, preservation, and sharing with libraries associated most closely with the last three. The paper also highlights a 'jurisdictional' driver in which libraries are claiming a role in this space. A wide range of factors, including governance, resourcing and skills, are identified as influencing ongoing developments. From the analysis, a model is constructed designed to capture the main aspects of an institutional RDM programme. This model helps to clarify the different issues involved in RDM, identifying layers of activity, multiple stakeholders and drivers, and a large number of factors influencing the implementation of any initiative. Institutions may usefully benchmark their activities against the

  3. Energy demand of electricity generation

    International Nuclear Information System (INIS)

    Drahny, M.

    1992-01-01

    The complex energy balance method was applied to selected electricity generation subsystems. The hydroelectric, brown coal based, and nuclear based subsystems are defined. The complex energy balance basically consists in identifying the mainstream and side-stream energy inputs and outputs for both the individual components and the entire electricity generation subsystem considered. Relationships for the complete energy balance calculation for the i-th component of the subsystem are given, and its side-stream energy inputs and outputs are defined. (J.B.). 4 figs., 4 refs

  4. Electronic Journals in Academic Libraries: A Comparison of ARL and Non-ARL Libraries.

    Science.gov (United States)

    Shemberg, Marian; Grossman, Cheryl

    1999-01-01

    Describes a survey dealing with academic library provision of electronic journals and other electronic resources that compared ARL (Association of Research Libraries) members to non-ARL members. Highlights include full-text electronic journals; computers in libraries; online public access catalogs; interlibrary loan and electronic reserves; access…

  5. Validating MCNP5 libraries and tracking the reason for differences between libraries in criticality calculations

    International Nuclear Information System (INIS)

    Hossny, K.

    2015-01-01

    The purpose of this work is to validate MCNP5 libraries by simulating 4 detailed benchmark experiments and comparing MCNP5 results (each library) with the experimental results and also the previously validated codes for the same experiments MORET 4.A coupled with APOLLO2 (France), and MONK8 (UK). The reasons for difference between libraries are also investigated in this work. Investigating the reason for the differences between libraries will be done by specifying a different library for specific part (clad, fuel, light water) and checking the result deviation than the previously calculated result (with all parts of the same library). The investigated benchmark experiments are of single fuel rods arrays that are water-moderated and water-reflected. Rods contained low-enriched (4.738 wt.% 92 235 U)uranium dioxide (UO 2 ) fuel were clad with aluminum alloy AGS. These experiments were subcritical approaches extrapolated to critical, with the multiplication factor reached being very close to 1.000 (within 0.1%); the subcritical approach parameter was the water level. The studied four cases differ from each other in pitch, number of fuel rods and of course critical height of water. The results show that although library ENDF/B-IV lacks light water treatment card, however its results can be reliable as light water treatment library does not have significant differences from library to another, so it will not be necessary to specify light water treatment card. The main reason for differences between ENDF/B-V and ENDF/B-VI is light water material, especially the Hydrogen element. Specifying the library of Uranium is necessary in case of using library ENDF/B-IV. On the other hand it is not necessary to specify library of cladding material whatever the used library. Validated libraries are ENDF/BIV, ENDF/B-V and ENDF/B-VI with codes in MCNP 42C, 50C and 60C respectively. The presentation slides have been added to the article

  6. School Libraries and Innovation

    Science.gov (United States)

    McGrath, Kevin G.

    2015-01-01

    School library programs have measured success by improved test scores. But how do next-generation school libraries demonstrate success as they strive to be centers of innovation and creativity? These libraries offer solutions for school leaders who struggle to restructure existing systems built around traditional silos of learning (subjects and…

  7. Electricity costs in liberalized market

    International Nuclear Information System (INIS)

    Barkans, J.; Junghans, G.

    2006-01-01

    In the liberalized electricity market the flexible demand determines the operation of power plants. Under market conditions the producers are forced to compete, and their power plants are normally loaded in order of increasing prices. The electricity costs consist of fixed and variable components, and the competition among producers simulates minimization of both the components. Considering the fixed costs (including maintenance, depreciation, capital costs and other permanent costs not depending on production) to be known, the total electricity costs in different operating conditions are based on the economic characteristics and the equipment load of a power plant. The paper describes the method for determination of electricity costs for condensing thermal power plants with permanent steam take-off for regeneration purposes and adjustable steam take-off for the needs of local heat energy consumers. The marginal costs for CHP plants are determined considering a number of different steam take-off from a turbine. At the electricity cost determination, auxiliary services also are taken into account. These can be reduced by adjusting the rotational speed of electric motors. The paper also shows how to determine the electricity costs for gas turbines, combined cycle gas turbines, and nuclear power plants. The position of hydro power plants among other PPs in the free market is also analysed. (authors)

  8. Integrated Library System (ILS): An Option for Library and ...

    African Journals Online (AJOL)

    The purpose of this paper is to review the capability of integrated library system as an option for managing library information resources using Koha ILS used at Babcock University as a case study. The paper is a review of the functions and performance of Koha ILS. It also includes personal experiences of librarians and the ...

  9. Libraries from the Inside Out.

    Science.gov (United States)

    Cohen, Elaine; And Others

    1989-01-01

    This annual report on library facilities and furnishings includes articles on: (1) designing libraries that are both handsome and functional; (2) functional use of color and light in library interior design; (3) creating user-friendly libraries; and (4) the seven deadly sins of architects. An eight-page section of photographs is included. (MES)

  10. Hispanic College Students Library Experience

    Science.gov (United States)

    Lumley, Risa; Newman, Eric; Brown, Haakon T.

    2015-01-01

    This study looks at undergraduate Hispanic students' interpretations and current perceptions of the academic library's purpose, usefulness and value. What are the reasons to use the library? What are the barriers to use? This study will examine academic libraries' move toward electronic library materials and what it means for Hispanic students.…

  11. Library Anxiety of Teacher Trainees

    Science.gov (United States)

    Sharma, Savita; Attri, Poonam

    2018-01-01

    This study investigates the library anxiety in Teacher Trainees and found it to be a prevalent phenomenon in students. The five dimensions of library anxiety, namely, barriers with staff, affective barriers, comfort with the library, knowledge of the library, and mechanical barriers have been identified. The sample of the study constituted 58…

  12. Surveying Medical Students to Gauge Library Use and Plan for a New Medical Library.

    Science.gov (United States)

    Aronoff, Nell

    2016-01-01

    In spring 2015, a 45-question survey was e-mailed to 585 medical students at the University at Buffalo (UB) in order to gauge their use of library spaces, resources, equipment, and services at UB's Health Sciences Library and plan for a library space located within a new medical school building. Students' self-reported use of the library during the academic year is presented along with the features they would like to see in their ideal library space. The responses generated in the survey are a barometer of current use and will be used in the planning process.

  13. Normalized cDNA libraries

    Science.gov (United States)

    Soares, Marcelo B.; Efstratiadis, Argiris

    1997-01-01

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form comprising: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3' noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to moderate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library.

  14. Museum of Comparative Zoology Library--The Agassiz Library: Harvard University.

    Science.gov (United States)

    Jonas, Eva S.; Regen, Shari S.

    1986-01-01

    Argues that the Museum of Comparative Zoology Library reflects the union between the nineteenth century natural history values of Louis Agassiz and the twentieth century library and information science methodology. Special collections, records, cataloging and classification, serials and their classification, policies, services, and procedures are…

  15. [Review of digital ground object spectral library].

    Science.gov (United States)

    Zhou, Xiao-Hu; Zhou, Ding-Wu

    2009-06-01

    A higher spectral resolution is the main direction of developing remote sensing technology, and it is quite important to set up the digital ground object reflectance spectral database library, one of fundamental research fields in remote sensing application. Remote sensing application has been increasingly relying on ground object spectral characteristics, and quantitative analysis has been developed to a new stage. The present article summarized and systematically introduced the research status quo and development trend of digital ground object reflectance spectral libraries at home and in the world in recent years. Introducing the spectral libraries has been established, including desertification spectral database library, plants spectral database library, geological spectral database library, soil spectral database library, minerals spectral database library, cloud spectral database library, snow spectral database library, the atmosphere spectral database library, rocks spectral database library, water spectral database library, meteorites spectral database library, moon rock spectral database library, and man-made materials spectral database library, mixture spectral database library, volatile compounds spectral database library, and liquids spectral database library. In the process of establishing spectral database libraries, there have been some problems, such as the lack of uniform national spectral database standard and uniform standards for the ground object features as well as the comparability between different databases. In addition, data sharing mechanism can not be carried out, etc. This article also put forward some suggestions on those problems.

  16. Changing State Digital Libraries

    Science.gov (United States)

    Pappas, Marjorie L.

    2006-01-01

    Research has shown that state virtual or digital libraries are evolving into websites that are loaded with free resources, subscription databases, and instructional tools. In this article, the author explores these evolving libraries based on the following questions: (1) How user-friendly are the state digital libraries?; (2) How do state digital…

  17. Marketing and Library Management.

    Science.gov (United States)

    Murphy, Kurt R.

    1991-01-01

    Examines the role of marketing in the management of libraries. The role of public relations (PR) in the total marketing concept is discussed, surveys that have explored PR efforts in academic and public libraries are described, and changes affecting libraries that marketing efforts could help to manage are discussed. (seven references) (LRW)

  18. Editorial Library: User Survey.

    Science.gov (United States)

    Surace, Cecily J.

    This report presents the findings of a survey conducted by the editorial library of the Los Angeles Times to measure usage and satisfaction with library service, provide background information on library user characteristics, collect information on patterns of use of the Times' clipping files, relate data on usage and satisfaction parameters to…

  19. Libraries serving dialogue

    CERN Document Server

    Dupont, Odile

    2014-01-01

    This book based on experiences of libraries serving interreligious dialogue, presents themes like library tools serving dialogue between cultures, collections dialoguing, children and young adults dialoguing beyond borders, story telling as dialog, librarians serving interreligious dialogue.

  20. Argonne Research Library | Argonne National Laboratory

    Science.gov (United States)

    Argonne Argonne Research Library The Argonne Research Library supports the scientific and technical research needs of Argonne National Laboratory employees. Our library catalog is available via the Research questions or concerns, please contact us at librarians@anl.gov. Contact the Library Argonne Research Library

  1. SEAL: Common Core Libraries and Services for LHC Applications

    CERN Document Server

    Generowicz, J; Moneta, L; Roiser, S; Marino, M; Tuura, L A

    2003-01-01

    The CERN LHC experiments have begun the LHC Computing Grid project in 2001. One of the project's aims is to develop common software infrastructure based on a development vision shared by the participating experiments. The SEAL project will provide common foundation libraries, services and utilities identified by the project's architecture blueprint report. This requires a broad range of functionality that no individual package suitably covers. SEAL thus selects external and experiment-developed packages, integrates them in a coherent whole, develops new code for missing functionality, and provides support to the experiments. We describe the set of basic components identified by the LHC Computing Grid project and thought to be sufficient for development of higher level framework components and specializations. Examples of such components are a plug-in manager, an object dictionary, object whiteboards, an incident or event manager. We present the design and implementation of some of these components and the und...

  2. A Digital Library Example in the Digital Age: İstanbul Bilgi University Library and e-Resources

    Directory of Open Access Journals (Sweden)

    Banu Elçi

    2015-06-01

    Full Text Available This article describes the ongoing of the traditional library and service concept alteration to the library and service concept of the digital age and refers to an instance as İstanbul Bilgi University Library and e-Resources that pioneers technological advances and digital applications to be integrated into the library field. In this sense it involves services, developments, applications and projects provided by Bilgi Libraries.This article also accounts for a number of works which integrated digital resources and applications and social network interactions of the internet and the web of the digital age and how they are adjusted to the library area.In this context, it refers to an evolvement of a different approach of libraries and enhacements diverged from customary and adopted library service concepts and reveals through the medium of samples from İstanbul Bilgi University Library and e-Resources.

  3. Leisure reading collections in academic health sciences and science libraries: results of visits to seven libraries.

    Science.gov (United States)

    Watson, Erin M

    2014-03-01

    To visit leisure reading collections in academic science and health sciences libraries to determine how they function and what role they play in their libraries. The author visited seven libraries with leisure reading collections and carried out a semistructured interview with those responsible either for selection of materials or for the establishment of the collection. These collections contained a variety of materials, with some libraries focusing on health-science-related materials and others on providing recreational reading. The size of the collections also varied, from 186 to 9700 books, with corresponding differences in budget size. All collections were housed apart, with the same loan period as the regular collection. No collections contained electronic materials. Although there was little comparable statistical data on usage, at the six libraries at which active selection was occurring, librarians and library staff felt that the collection was well used and felt that it provided library users with benefits such as stress relief and relaxation and exposure to other perspectives. Librarians and library staff at the libraries that undertook active selection felt that their leisure reading collection was worthwhile. It would be interesting for future work to focus on the user experience of such collections. © 2013 The author. Health Information and Libraries Journal © 2013 Health Libraries Group.

  4. Strategic marketing planning in library

    Directory of Open Access Journals (Sweden)

    Karmen Štular-Sotošek

    2000-01-01

    Full Text Available The article is based on the idea that every library can design instruments for creating events and managing the important resources of today's world, especially to manage the changes. This process can only be successful if libraries use adequate marketing methods. Strategic marketing planning starts with the analysis of library's mission, its objectives, goals and corporate culture. By analysing the public environment, the competitive environment and the macro environment, libraries recognise their opportunities and threats. These analyses are the foundations for library definitions: What does the library represent?, What does it aspire to? Which goals does it want to reach? What kind of marketing strategy will it use for its target market?

  5. Impacto de las publicaciones periódicas electrónicas en las bibliotecas universitarias privadas argentinas

    Directory of Open Access Journals (Sweden)

    González Bonorino, Adina

    2005-09-01

    Full Text Available This paper studies the present impact of the use of electronic journals in the areas and subdivisions of the academic libraries in the private university system of Argentine, i.e.; departments, services and/or sectors in the information units. This research analyses the following aspects: Selection and Acquisition, Human Resources, Technical Process, Informatics, Marketing, User's services, Library's cooperation and Edition. It describes the reasons why the private academic libraries have included the electronic journals in their collections. The cooperation library system, as a decisive structure for the management of this technology resource, is studied. This investigation shows also trends in the field of cooperation and electronic publishing in Argentina.

    La presente investigación estudia el impacto que produce la aparición de publicaciones periódicas electrónicas en los diferentes departamentos, servicios o áreas que conforman las unidades de información de las bibliotecas privadas universitarias argentinas en la actualidad. Se analizan las áreas de Selección y adquisición, Recursos humanos, Procesos técnicos, Infraestructura informática, Marketing de servicios bibliotecarios, Servicios al usuario, Cooperación y Edición, describiéndose los factores que han movilizado a las bibliotecas universitarias a incorporar revistas electrónicas. Se analizan las actuales redes de cooperación como factor importante en la gestión de este nuevo recurso tecnológico y futuras tendencias en el campo de la cooperación y edición electrónica en la Argentina.

  6. The Library Macintosh at SCIL [Small Computers in Libraries]'88.

    Science.gov (United States)

    Valauskas, Edward J.; And Others

    1988-01-01

    The first of three papers describes the role of Macintosh workstations in a library. The second paper explains why the Macintosh was selected for end-user searching in an academic library, and the third discusses advantages and disadvantages of desktop publishing for librarians. (8 references) (MES)

  7. Reading for Education: the role of libraries | Dadzie | Ghana Library ...

    African Journals Online (AJOL)

    Reading for Education: the role of libraries. ... PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES. Ghana Library Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home ...

  8. Effects of Public Relations Activities on Customer Satisfaction in the University Libraries

    Directory of Open Access Journals (Sweden)

    Ayşe Gedikçi, Öndoğan

    2013-11-01

    Full Text Available Like all organizations in the process of globalization, university libraries also have focused on their customers much more in order to continue their existence and they have diversified their services in order to increase customer satisfaction. Customer satisfaction emerges as a result of integration of many interdependent components. In this study, public relations works, the most important factor affecting the customer satisfaction, are handled and it is tried to determine the effect of public relations works conducted at Selcuk University Central Library on the customer satisfaction. In the study used descriptive methods, data were obtained from all customer groups who came to the Central Library through questionnaire. It was come out that all customer groups who came to the Central Library were satisfied with public relations works related to the library's physical elements and service elements, but they were not content with public relations works conducted out of the organization in order to improve the customer relations. In consequence of the research, it was observed that the variable that customers gives more importance is the physical elements variable ( =3,86. The most intense relationship between variables is between service element with the physical elements (r=0,667, p<0,01 and public relations elements (r=0,642, p<0,0.

  9. Adoption of Library 2.0 Functionalities by Academic Libraries and Users: A Knowledge Management Perspective

    Science.gov (United States)

    Kim, Yong-Mi; Abbas, June

    2010-01-01

    This study investigates the adoption of Library 2.0 functionalities by academic libraries and users through a knowledge management perspective. Based on randomly selected 230 academic library Web sites and 184 users, the authors found RSS and blogs are widely adopted by academic libraries while users widely utilized the bookmark function.…

  10. Creating metadata that work for digital libraries and Google

    OpenAIRE

    Dawson, Alan

    2004-01-01

    For many years metadata has been recognised as a significant component of the digital information environment. Substantial work has gone into creating complex metadata schemes for describing digital content. Yet increasingly Web search engines, and Google in particular, are the primary means of discovering and selecting digital resources, although they make little use of metadata. This article considers how digital libraries can gain more value from their metadata by adapting it for Google us...

  11. Multi-objective component sizing of a power-split plug-in hybrid electric vehicle powertrain using Pareto-based natural optimization machines

    Science.gov (United States)

    Mozaffari, Ahmad; Vajedi, Mahyar; Chehresaz, Maryyeh; Azad, Nasser L.

    2016-03-01

    The urgent need to meet increasingly tight environmental regulations and new fuel economy requirements has motivated system science researchers and automotive engineers to take advantage of emerging computational techniques to further advance hybrid electric vehicle and plug-in hybrid electric vehicle (PHEV) designs. In particular, research has focused on vehicle powertrain system design optimization, to reduce the fuel consumption and total energy cost while improving the vehicle's driving performance. In this work, two different natural optimization machines, namely the synchronous self-learning Pareto strategy and the elitism non-dominated sorting genetic algorithm, are implemented for component sizing of a specific power-split PHEV platform with a Toyota plug-in Prius as the baseline vehicle. To do this, a high-fidelity model of the Toyota plug-in Prius is employed for the numerical experiments using the Autonomie simulation software. Based on the simulation results, it is demonstrated that Pareto-based algorithms can successfully optimize the design parameters of the vehicle powertrain.

  12. ENDL type formats for the LLNL Evaluated Atomic Data Library, EADL, for the Evaluated Electron Data Library, EEDL, and for the Evaluated Photon Data Library, EPDL

    International Nuclear Information System (INIS)

    Perkins, S.T.; Cullen, D.E.

    1994-07-01

    Over the past five years, Lawrence Livermore National Laboratory has published extensive compilations derived from three of its main atomic data libraries. These are specifically the evaluated atomic relaxation data library, EADL, the evaluated electron interaction data library, EEDL, and the evaluated photon interaction data library, EPDL. All of these libraries span atomic numbers, Z, from 1 to 100. Additionally the particle interaction libraries cover the incident particle energy range from 10 eV to 100 GeV. The purpose of these libraries is to furnish data for particle transport calculations. Thus the files have been released for external distribution in a machine independent characterize format. In a complete coupled electron-photon transport analysis, results from all three of the data files are required. Therefore it is reasonable to discuss the format for all three libraries in the same work; that is the approach taken here. This report is composed of three sections, each section describing one of the libraries. For ease of reading, each section is separate and unique unto itself, including its own table numbers and references. This report will accompany any request for copies of these evaluated data libraries. This report and these three data libraries are available from the data centers at Brookhaven National Laboratory, RSIC (Oak Ridge National Laboratory), OECD/NEA Data Bank (France), and IAEA (Vienna)

  13. Electrical-Loss Analysis of Power-Split Hybrid Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Andrea Bonfiglio

    2017-12-01

    Full Text Available The growing development of hybrid electric vehicles (HEVs has seen the spread of architectures with transmission based on planetary gear train, realized thanks to two electric machines. This architecture, by continuously regulating the transmission ratio, allows the internal combustion engine (ICE to work in optimal conditions. On the one hand, the average ICE efficiency is increased thanks to better loading situations, while, on the other hand, electrical losses are introduced due to the power circulation between the two electrical machines mentioned above. The aim of this study is then to accurately evaluate electrical losses and the average ICE efficiency in various operating conditions and over different road missions. The models used in this study are presented for both the Continuously Variable Transmission (CVT architecture and the Discontinuously Variable Transmission (DVT architecture. In addition, efficiency maps of the main components are shown. Finally, the simulation results are presented to point out strengths and weaknesses of the CVT architecture.

  14. AUTOMATION BASED LIBRARY MANAGEMENT IN DEPOK PUBLIC LIBRARY IN THE CONTEXT OF RITUAL PERFORMANCE

    Directory of Open Access Journals (Sweden)

    Rafiqa Maulidia

    2017-06-01

    Full Text Available Library management using manual system is no longer adequate to handle the workload in the library routines, librarians must use application of library automation. To provide a good working performance, librarians use strategy, competences and certain habits, which are referred to as a ritual performance. The performance of the ritual is the demonstration of competence spontaneously by individuals in dealing with individuals, groups and organizations, which contains elements of personal ritual, the work ritual, social ritual, and organization ritual. The research focuses in the automation based library management in the context of the performance of the ritual. This study used a qualitative approach with case study method. The findings suggest that the personal ritual shows the personal habits of librarians to do their tasks, ritual librarian's work show responsibility towards their duties, social rituals strengthen the emotional connection between librarians and leaders, as well as ritual organizations suggest the involvement of librarians in giving their contribution in decision making. Conclusions of this study shows that the performance of rituals librarian at Depok Public Library gives librarians the skills to implement automation systems in the library management, and reflect the values of responsibility, mutual trust, and mutual respect.   Key words : Library Management, Library Automation, Ritual Performance, Ritual Performance Value

  15. The Value of Academic Libraries: Library Services as a Predictor of Student Retention

    Science.gov (United States)

    Murray, Adam; Ireland, Ashley; Hackathorn, Jana

    2016-01-01

    This study examined the predictive relationship between library use by individual students and their retention status in university settings. The methodology builds on a small number of previous studies to examine library use at the individual level to determine if use of specific library services is predictive of retention for freshmen and…

  16. Learning Boost C++ libraries

    CERN Document Server

    Mukherjee, Arindam

    2015-01-01

    If you are a C++ programmer who has never used Boost libraries before, this book will get you up-to-speed with using them. Whether you are developing new C++ software or maintaining existing code written using Boost libraries, this hands-on introduction will help you decide on the right library and techniques to solve your practical programming problems.

  17. FRDS.Broker Library

    DEFF Research Database (Denmark)

    2018-01-01

    The FRDS.Broker library is a teaching oriented implementation of the Broker architectural pattern for distributed remote method invocation. It defines the central roles of the pattern and provides implementations of those roles that are not domain/use case specific. It provides a JSON based (GSon...... library) Requestor implementation, and implementations of the ClientRequestHandler and ServerRequestHandler roles in both a Java socket based and a Http/URI tunneling based variants. The latter us based upon the UniRest and Spark-Java libraries. The Broker pattern and the source code is explained...

  18. Report of the National Libraries Committee.

    Science.gov (United States)

    Department of Education and Science, London (England).

    The study was undertaken to examine the functions and organization of the British Museum Library, the National Central Library, the National Lending Library for Science and Technology, and the Science Museum Library in providing national library facilities; to consider whether in the interests of efficiency and economy such facilities should be…

  19. The method of the correlation and dispersion defining of the total power components in the electric transport devices

    Directory of Open Access Journals (Sweden)

    A. V. Nikitenko

    2013-04-01

    Full Text Available Purpose. Development and theoretical ground of the analytical method for the calculation of the active, reactive and total powers in the electric traction devices, taking into consideration the non-stationary character of the stochastic processes change of the voltage and current in the elements of these systems. Methodology. The mathematical methods of the random processes theory and the “discrete electrical engineering” methods are used for solving the main problem of this paper. Findings. The Method of the Correlation and Dispersion is developed for definition of the active power, the reactive power by Fryse and the total power of the devices in the elements of the electric traction system of the main-line railways. The method is based on the well-known concepts of auto- and inter-correlation functions of the random processes which govern the feeder voltages and the currents in the traction power supply subsystem as well as the currents and voltages of the electric rolling stock. The method developed in this paper allows estimating the powers of both stationary and non-stationary processes. This method can be used for the analysis of both the traction mode and the regenerative braking mode of the electric rolling stock. The total power components were calculated for the one of the feeder areas of the Prydniprovsk railway using this method. The results show the significant flow of the reactive power in the traction power supply system. This fact is also confirmed by the high values of the reactive power coefficient. Originality. Scientific novelty of the research is consisted in the following. Firstly, for defining the active and reactive powers in elements of the traction power supply system the new method (the Method of Correlation and Dispersion is created and grounded. This method is different from other existing methods because it takes into consideration the varying non-stationary character of the chance processes of the feeder and

  20. EPA Library Network Communication Strategies

    Science.gov (United States)

    To establish Agency-wide procedures for the EPA National Library Network libraries to communicate, using a range of established mechanisms, with other EPA libraries, EPA staff, organizations and the public.

  1. Integrated circuit cell library

    Science.gov (United States)

    Whitaker, Sterling R. (Inventor); Miles, Lowell H. (Inventor)

    2005-01-01

    According to the invention, an ASIC cell library for use in creation of custom integrated circuits is disclosed. The ASIC cell library includes some first cells and some second cells. Each of the second cells includes two or more kernel cells. The ASIC cell library is at least 5% comprised of second cells. In various embodiments, the ASIC cell library could be 10% or more, 20% or more, 30% or more, 40% or more, 50% or more, 60% or more, 70% or more, 80% or more, 90% or more, or 95% or more comprised of second cells.

  2. library use instruction and the pattern of utilization of library services ...

    African Journals Online (AJOL)

    Global Journal

    the University of Calabar library, the vision of the parent institution is a .... prevalence of a user category devoid of basic information literacy ... because they might have been computer literate. 90 ..... Nigerian medical libraries: Challenges for ...

  3. Creating a Lean, Green, Library Machine: Easy Eco-Friendly Habits for Your Library

    Science.gov (United States)

    Blaine, Amy S.

    2010-01-01

    For some library media specialists, implementing the three Rs of recycling, reducing, and reusing comes easily; they've been environmentally conscious well before the concept of going green made its way into the vernacular. Yet for some of library media specialists, the thought of greening their library, let alone the entire school, can seem…

  4. Two component micro injection molding for MID fabrication

    DEFF Research Database (Denmark)

    Islam, Mohammad Aminul; Hansen, Hans Nørgaard; Tang, Peter Torben

    2009-01-01

    Molded Interconnect Devices (MIDs) are plastic substrates with electrical infrastructure. The fabrication of MIDs is usually based on injection molding and different process chains may be identified from this starting point. The use of MIDs has been driven primarily by the automotive sector......, but recently the medical sector seems more and more interested. In particular the possibility of miniaturization of 3D components with electrical infrastructure is attractive. The paper describes possible manufacturing routes and challenges of miniaturized MIDs based on two component micro injection molding...

  5. Applying reliability analysis to design electric power systems for More-electric aircraft

    Science.gov (United States)

    Zhang, Baozhu

    The More-Electric Aircraft (MEA) is a type of aircraft that replaces conventional hydraulic and pneumatic systems with electrically powered components. These changes have significantly challenged the aircraft electric power system design. This thesis investigates how reliability analysis can be applied to automatically generate system topologies for the MEA electric power system. We first use a traditional method of reliability block diagrams to analyze the reliability level on different system topologies. We next propose a new methodology in which system topologies, constrained by a set reliability level, are automatically generated. The path-set method is used for analysis. Finally, we interface these sets of system topologies with control synthesis tools to automatically create correct-by-construction control logic for the electric power system.

  6. Libraries\\\\\\' Nationwide Membership (Ghadir Quality Assessment Using SERVQUAL: Co-Libraries\\\\\\' Perspective

    Directory of Open Access Journals (Sweden)

    Sirous Alidousti

    2012-02-01

    Full Text Available Ghadir Program has been developed to make direct access to academic universities’ resources. This program has been implemented in Ministry of Science, Research and Education by Iranian Research Institute for Information Science and Technology as the coordinating centre since 1999 in 240 libraries after a period of pilot run. After a couple of days, it was necessary to assess the quality of this program to make changes if required. Therefore, here the results of assessing the quality of services provided by the coordinating center from the viewpoint of participant libraries were presented. Servqual applied as the base for this quality assessment. The population of this research was the entire participants which consist of 240 libraries affiliated to 66 universities and research centers. The questionnaire as the research instrument was sent to the libraries’ managers and they were asked to give them to Ghadir Program agents to fill it as well. As the result, among the questionnaires returned form 131 libraries, 178 ones were analyzable. The satisfaction of participant libraries from the services received and the gap between these services and their expectations from the coordinating center was investigated. According to the findings, the satisfaction of libraries from this center was more than average (3.5 from 5. In the Servqual dimensions, empathy and responsiveness had the maximum and reliability had the minimum gap between services received and expectations from the coordinating center.

  7. Consumer health information partnerships: the health science library and multitype library system.

    Science.gov (United States)

    Hollander, S

    1996-04-01

    The University of Illinois Library of the Health Sciences at Rockford (LHS-Rockford) long has honored a commitment to serving the health information needs of the greater Rockford community. Utilization data collected over the past five years indicate that approximately 50% of reference transactions involve persons not affiliated with the university. In early 1994, LHS-Rockford submitted a proposal to the Northern Illinois Library System (NILS), a multitype system spanning twelve counties in northwestern Illinois, asking to serve as a resource library for improving medical and health information services provided by the 138 NILS member libraries. The NILS funded this pilot project as part of an effort to implement a new strategic plan, which encouraged member libraries to form networks to provide reference back-up service. LHS-Rockford acquired InfoTrac's Health Reference Center, a consumer health information database, and set up a dedicated workstation near the information and circulation desk. Referral guidelines were established and the project was promoted among NILS member libraries. Activities were documented in order to track project success in terms of referrals and outcomes. The demonstration project was very successful, and it proves public consumers seeking health information can benefit greatly from this type of cooperative arrangement.

  8. Biomathematical Description of Synthetic Peptide Libraries

    Science.gov (United States)

    Trepel, Martin

    2015-01-01

    Libraries of randomised peptides displayed on phages or viral particles are essential tools in a wide spectrum of applications. However, there is only limited understanding of a library's fundamental dynamics and the influences of encoding schemes and sizes on their quality. Numeric properties of libraries, such as the expected number of different peptides and the library's coverage, have long been in use as measures of a library's quality. Here, we present a graphical framework of these measures together with a library's relative efficiency to help to describe libraries in enough detail for researchers to plan new experiments in a more informed manner. In particular, these values allow us to answer-in a probabilistic fashion-the question of whether a specific library does indeed contain one of the "best" possible peptides. The framework is implemented in a web-interface based on two packages, discreteRV and peptider, to the statistical software environment R. We further provide a user-friendly web-interface called PeLiCa (Peptide Library Calculator, http://www.pelica.org), allowing scientists to plan and analyse their peptide libraries. PMID:26042419

  9. Molecules with an induced dipole moment in a stochastic electric field.

    Science.gov (United States)

    Band, Y B; Ben-Shimol, Y

    2013-10-01

    The mean-field dynamics of a molecule with an induced dipole moment (e.g., a homonuclear diatomic molecule) in a deterministic and a stochastic (fluctuating) electric field is solved to obtain the decoherence properties of the system. The average (over fluctuations) electric dipole moment and average angular momentum as a function of time for a Gaussian white noise electric field are determined via perturbative and nonperturbative solutions in the fluctuating field. In the perturbative solution, the components of the average electric dipole moment and the average angular momentum along the deterministic electric field direction do not decay to zero, despite fluctuations in all three components of the electric field. This is in contrast to the decay of the average over fluctuations of a magnetic moment in a Gaussian white noise magnetic field. In the nonperturbative solution, the component of the average electric dipole moment and the average angular momentum in the deterministic electric field direction also decay to zero.

  10. Process for protecting bonded components from plating shorts

    Science.gov (United States)

    Tarte, Lisa A.; Bonde, Wayne L.; Carey, Paul G.; Contolini, Robert J.; McCarthy, Anthony M.

    2000-01-01

    A method which protects the region between a component and the substrate onto which the components is bonded using an electrically insulating fillet of photoresist. The fillet protects the regions from subsequent plating with metal and therefore shorting the plated conductors which run down the sides of the component and onto the substrate.

  11. E-Commerce for Library Promotion and Sustainability: How Library Technicians Can Market Themselves and Their Library's Services Online

    Science.gov (United States)

    von Retzlaff, Lothar

    2006-01-01

    As players in the delivery of services and online information, libraries are in the best position to use staff expertise and the technology they have developed to foster community awareness of social, professional and commercial interactions on the internet. Historically, libraries have been progressive institutions, undertaking constant…

  12. School Library Supplement. Putting Your Library Automation System to Work [and] Using Videodiscs in Research Projects [and] Library Security: What to Look For [and] Expanding Library/Media Services with Media Retrieval [and] How to Network CD-ROMs (and) The School Library Resource Directory.

    Science.gov (United States)

    Karpisek, Marian; And Others

    1995-01-01

    Presents five articles and a company resource directory to help librarians successfully incorporate technology into school libraries. Discusses actual situations, examines student needs, and gives advice to help librarians with library automation systems, videodiscs, library security systems, media retrieval, networking CD-ROMs, and locating…

  13. A Recent Comparison on Public', Libraries

    Directory of Open Access Journals (Sweden)

    Bülent Yılmaz

    1999-03-01

    Full Text Available Public libraries have been changing by depend on the social development. This changing can create the new problems for public libraries. To make some evaluations on public libraries is important in bringing light to these problems. To compare the public library system and services in a country with the others can give useful results. In these research, Turkish public library system and services has been compared with the public library system dnd services in England, Netherland and Austria. As a result, it hçıs been understood that Turkish public libraries have some important insufficiencies according to the other countries.

  14. Basis calculation of phase cross section library in a low power fast reactor neutronic simulation

    International Nuclear Information System (INIS)

    Jachic, J.

    1993-09-01

    In order to implement the utilization of the efficient multidimensional cubic SPLINE interpolation, we determine the phase library bases for net like relevant state components. A generic cubic surface and a weighted plane pertinent alternative interpolating methods used capable to generate cross sections values for fixed coordinates from cell code calculated data points is used. It is verified that the phase library bases increases or decrease smoothly and monotonically with the spectrum asymmetry and total flux buckling. This justifies its use in cross section updating avoiding cell calculations. (author)

  15. "Better libraries for everyone!": the development of library services in ...

    African Journals Online (AJOL)

    This article examines the political, social and cultural ways in which institutions such as libraries helped to shape the reading practices of Black and White South Africans in the Western Cape in the 1940s. An examination of several institutions involved in library development in this period (the Society for Book Distribution, ...

  16. Inductive electric field at the magnetopause

    International Nuclear Information System (INIS)

    Heikkila, W.J.

    1982-01-01

    The electric field data for two crossings of the magnetopause by ISEE-1 on November 20, 1977, have been analyzed with high time resolution. In both cases the electric field has a negative dawn-dusk component in the boundary layer, so it must reverse somewhere within the current layer to the positive value outside. If there is a component parallel to the moving magnetopause current it is small, and by no means obvious. In the case of the exit crossing from the boundary layer to the magnetosheath the data show that the electric field vector is turning for about two seconds at roughly the satellite spin rate; this changing direction suggests that the electric field has a curl. Such a curl could be caused by a travelling localized perturbation of the magnetopause surface current associated with impulsive plasma transport through the magnetopause

  17. Staff-less libraries - recent Danish public library experiences

    DEFF Research Database (Denmark)

    Johannsen, Carl Gustav

    2012-01-01

    The article reports on Danish experiences with staff-less public libraries in terms of local community characteristics, their use- visits and loans, characcteristics of their users in terms of sex, age and, finally, an analysis of critical success factors revealed......The article reports on Danish experiences with staff-less public libraries in terms of local community characteristics, their use- visits and loans, characcteristics of their users in terms of sex, age and, finally, an analysis of critical success factors revealed...

  18. Mixture-based combinatorial libraries from small individual peptide libraries: a case study on α1-antitrypsin deficiency.

    Science.gov (United States)

    Chang, Yi-Pin; Chu, Yen-Ho

    2014-05-16

    The design, synthesis and screening of diversity-oriented peptide libraries using a "libraries from libraries" strategy for the development of inhibitors of α1-antitrypsin deficiency are described. The major buttress of the biochemical approach presented here is the use of well-established solid-phase split-and-mix method for the generation of mixture-based libraries. The combinatorial technique iterative deconvolution was employed for library screening. While molecular diversity is the general consideration of combinatorial libraries, exquisite design through systematic screening of small individual libraries is a prerequisite for effective library screening and can avoid potential problems in some cases. This review will also illustrate how large peptide libraries were designed, as well as how a conformation-sensitive assay was developed based on the mechanism of the conformational disease. Finally, the combinatorially selected peptide inhibitor capable of blocking abnormal protein aggregation will be characterized by biophysical, cellular and computational methods.

  19. Status of the JEFF data library

    International Nuclear Information System (INIS)

    Nordborg, C.

    2006-01-01

    A new improved version of the OECD Nuclear Energy Agency (NEA) co-ordinated Joint Evaluated Fission and Fusion (JEFF) data library, JEFF-3.1, was released in May 2005. It comprises a general purpose library and the following five special purpose libraries: activation; thermal scattering law; radioactive decay; fission yield; and proton library. The objective of the previous version of the library (JEFF-2.2) was to achieve improved performance for existing reactors and fuel cycles. In addition to this objective, the JEFF-3.1 library aims to provide users with data for a wider range of applications. These include innovative reactor concepts, transmutation of radioactive waste, fusion, and various other energy and non-energy related industrial applications. Initial benchmark testing has confirmed the expected very good performance of the JEFF-3.1 library. Additional benchmarking of the libraries is underway, both for the general purpose and for the special purpose libraries. A new three-year mandate to continue developing the JEFF library was recently granted by the NEA. For the next version of the library, JEFF-3.2, it is foreseen to put more effort into fission product and minor actinide evaluations, as well as the inclusion of more covariance data. (authors)

  20. Method for hermetic electrical connections

    Science.gov (United States)

    Monroe, Saundra L [Tijeras, NM; Glass, S Jill [Albuquerque, NM; Stone, Ronnie G [Albuquerque, NM; Bond, Jamey T [Albuquerque, NM; Susan, Donald F [Albuquerque, NM

    2011-12-27

    A method of providing a hermetic, electrical connection between two electrical components by mating at least one metal pin in a glass-ceramic to metal seal connector to two electrical components, wherein the glass-ceramic to metal seal connector incorporates at least one metal pin encased (sealed) in a glass-ceramic material inside of a metal housing, with the glass-ceramic material made from 65-80% SiO.sub.2, 8-16% Li.sub.2O, 2-8% Al.sub.2O.sub.3, 1-5% P.sub.2O.sub.5, 1-8% K.sub.2O, 0.5-7% B.sub.2O.sub.3, and 0-5% ZnO. The connector retains hermeticity at temperatures as high as 700.degree. C. and pressures as high as 500 psi.