WorldWideScience

Sample records for electric-motor applications quarterly

  1. The electric motor handbook

    Energy Technology Data Exchange (ETDEWEB)

    Hurst, R.W.; Feltham, P. (eds.)

    2004-05-01

    This handbook outlines the important role that electric motors play in modern society. It covers the field of motor applications from various motor types to their use and repair. It also presents practical applications of electric motors and methods on motor efficiency. More than half of all electricity generated, and 75 per cent of all industrial electricity consumption is consumed by electric motors. Electrical personnel must be aware of all factors involved in electric motors in order to choose and apply the appropriate size of electric motor. These factors include efficiency, sizing and proper application. The efficient use and maximum life expectancy of electric motors depends on proper motor protection, control and maintenance. This handbook includes articles from leading experts on electric motors in modern electrical systems. The content includes: design considerations; proper electric motor sizing techniques; optimal electric motor application; electric motor protection technology; electric motor control principles; electric motor maintenance and troubleshooting; induction electric motors; electric motor bearing currents; electric motor bearing lubrication; electromagnetism; electric motor enclosures; electric motor testing; electric motor repair; DC electric motor; electric motor starters; electric motor brushes; industrial electric motors; electric motor diagrams; AC electric motors; electric motor wiring; electric motor service; electric motor rewinding; electric motor winding; diagram of electric motor wiring; electric motor kit; and, troubleshooting electric motors. A directory of motor manufacturers and suppliers was also included. refs., tabs., figs.

  2. Lightweight High Efficiency Electric Motors for Space Applications

    Science.gov (United States)

    Robertson, Glen A.; Tyler, Tony R.; Piper, P. J.

    2011-01-01

    Lightweight high efficiency electric motors are needed across a wide range of space applications from - thrust vector actuator control for launch and flight applications to - general vehicle, base camp habitat and experiment control for various mechanisms to - robotics for various stationary and mobile space exploration missions. QM Power?s Parallel Path Magnetic Technology Motors have slowly proven themselves to be a leading motor technology in this area; winning a NASA Phase II for "Lightweight High Efficiency Electric Motors and Actuators for Low Temperature Mobility and Robotics Applications" a US Army Phase II SBIR for "Improved Robot Actuator Motors for Medical Applications", an NSF Phase II SBIR for "Novel Low-Cost Electric Motors for Variable Speed Applications" and a DOE SBIR Phase I for "High Efficiency Commercial Refrigeration Motors" Parallel Path Magnetic Technology obtains the benefits of using permanent magnets while minimizing the historical trade-offs/limitations found in conventional permanent magnet designs. The resulting devices are smaller, lower weight, lower cost and have higher efficiency than competitive permanent magnet and non-permanent magnet designs. QM Power?s motors have been extensively tested and successfully validated by multiple commercial and aerospace customers and partners as Boeing Research and Technology. Prototypes have been made between 0.1 and 10 HP. They are also in the process of scaling motors to over 100kW with their development partners. In this paper, Parallel Path Magnetic Technology Motors will be discussed; specifically addressing their higher efficiency, higher power density, lighter weight, smaller physical size, higher low end torque, wider power zone, cooler temperatures, and greater reliability with lower cost and significant environment benefit for the same peak output power compared to typically motors. A further discussion on the inherent redundancy of these motors for space applications will be provided.

  3. Research on High-efficient Remanufacturing Technologies and Application of Electric Motor

    Science.gov (United States)

    Liu, Ren; Zhao, Yuejin; Yang, Xu; Wang, Gen

    2017-09-01

    The energy conservation of electric motor system is the key of industrial energy conservation. With the implementation and acceleration of electric motor energy efficiency improvement plan, more and more electric motors are knocked out. High-efficient remanufacturing of electric motor refers to improving the efficiency of electric motor and recycling the resources by replacing the winding, iron core and other components of electric motor on the basis of the low-efficient/outdated electric motors, which conforms to China’s policy of circular economy and resource recovery. The remanufacturing of electric motor not only maximizes the use of resources, but also reduces the energy consumption generated by reprocessing of cast iron, silicon steel sheet and other materials in dismantling of electric motor. However, structures and iron core materials used in design and manufacture of electric motors are different, and the degrees of wear of electric motors are also different under different operating conditions, which further result in diversified design schemes, increased remanufacturing cost and reduced remanufacturing efficiency. This paper analyzes the key process technologies for remanufacturing of electric motors are researched by analyzing the remanufacturing technologies of electric motors, and presents the feasibility to replace the cast-aluminum rotor with cast-copper rotor in high-efficient remanufacturing process of electric motor.

  4. Sensorless AC electric motor control robust advanced design techniques and applications

    CERN Document Server

    Glumineau, Alain

    2015-01-01

    This monograph shows the reader how to avoid the burdens of sensor cost, reduced internal physical space, and system complexity in the control of AC motors. Many applications fields—electric vehicles, wind- and wave-energy converters and robotics, among them—will benefit. Sensorless AC Electric Motor Control describes the elimination of physical sensors and their replacement with observers, i.e., software sensors. Robustness is introduced to overcome problems associated with the unavoidable imperfection of knowledge of machine parameters—resistance, inertia, and so on—encountered in real systems. The details of a large number of speed- and/or position-sensorless ideas for different types of permanent-magnet synchronous motors and induction motors are presented along with several novel observer designs for electrical machines. Control strategies are developed using high-order, sliding-mode and quasi-continuous-sliding-mode techniques and two types of observer–controller schemes based on backstepping ...

  5. Electric Motor Thermal Management

    Energy Technology Data Exchange (ETDEWEB)

    Bennion, Kevin S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-01

    Thermal management enables more efficient and cost-effective motors. This Annual Merit Review presentation describes the technical accomplishments and progress in electric motor thermal management R&D over the last year. This project supports a broad industry demand for data, analysis methods, and experimental techniques to improve and better understand motor thermal management.

  6. Electric motor handbook

    CERN Document Server

    Chalmers, B J

    2013-01-01

    Electric Motor Handbook aims to give practical knowledge in a wide range of capacities such as plant design, equipment specification, commissioning, operation and maintenance. The book covers topics such as the modeling of steady-state motor performance; polyphase induction, synchronous, and a.c. commutator motors; ambient conditions, enclosures, cooling and loss dissipation; and electrical supply systems and motor drives. Also covered are topics such as variable-speed drives and motor control; materials and motor components; insulation types, systems, and techniques; and the installation, sit

  7. Mechanical design of electric motors

    CERN Document Server

    Tong, Wei

    2014-01-01

    Rapid increases in energy consumption and emphasis on environmental protection have posed challenges for the motor industry, as has the design and manufacture of highly efficient, reliable, cost-effective, energy-saving, quiet, precisely controlled, and long-lasting electric motors.Suitable for motor designers, engineers, and manufacturers, as well as maintenance personnel, undergraduate and graduate students, and academic researchers, Mechanical Design of Electric Motors provides in-depth knowledge of state-of-the-art design methods and developments of electric motors. From motor classificati

  8. Electric motor for laser-mechanical drilling

    Science.gov (United States)

    Grubb, Daryl L.; Faircloth, Brian O.; Zediker, Mark S.

    2017-10-10

    A high power laser drilling system utilizing an electric motor laser bottom hole assembly. A high power laser beam travels within the electric motor for performing a laser operation. A system includes a down hole electrical motor having a hollow rotor for conveying a high power laser beam having a wavelength less than 1060 nm through the electrical motor.

  9. Speed and position sensors for electric motors

    Energy Technology Data Exchange (ETDEWEB)

    Lyyjynen, M. [Helsinki University of Technology, Otaniemi (Finland). Institute of Intelligent Power Electronics

    1997-12-31

    This paper gives an overview of speed and position measuring instruments for electric motors. The emphasis is on sensors that are designed to operate at industrial environment. In addition to that, some other, mostly magnetic sensors which are used, e.g., in automotive applications, are presented. Some of them are already applied in induction motors and some might be worth a try remembering the limitations. Automotive sensors are very cost-effective due to high production volumes. (orig.) 22 refs.

  10. 77 FR 26607 - Energy Conservation Program: Test Procedures for Electric Motors and Small Electric Motors

    Science.gov (United States)

    2012-05-04

    ... finalized key provisions related to small electric motor testing in the July 2009 final rule, but opted to... for Electric Motors and Small Electric Motors; Final Rules #0;#0;Federal Register / Vol. 77, No. 87... Energy Conservation Program: Test Procedures for Electric Motors and Small Electric Motors AGENCY: Office...

  11. Considerations for the selection of an applicable energy efficiency test procedure for electric motors in Malaysia: Lessons for other developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Yanti, P.A.A. [Petronas Carigali Sdn. Bhd. Level 18, Tower 1, Petronas Twin Towers, 50088 Kuala Lumpur (Malaysia); Department of Mechanical Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia)], E-mail: yanti_padli@petronas.com.my; Mahlia, T.M.I. [Department of Mechanical Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia)], E-mail: indra@um.edu.my

    2009-09-15

    Electric motors are a major energy-consuming appliance in the industrial sector. According to a survey, electric motors account for more than 70% of the total growth from 1991 to 2004 in electricity consumption in this sector in Malaysia. To reduce electricity consumption, Malaysia should consider resetting the minimum energy efficiency standards for electric motors sometime in the coming year. The first step towards adopting energy efficiency standards is the creation of a procedure for testing and rating equipment. An energy test procedure is the technical foundation for all energy efficiency standards, energy labels and other related programs. The test conditions in the test procedure must represent the conditions of the country. This paper presents the process for the selection of an energy test procedure for electric motors in Malaysia based on the country's conditions and requirements. The adoption of test procedures for electric motors internationally by several countries is also discussed in this paper. Even though the paper only discusses the test procedure for electric motors in Malaysia, the methods can be directly applied in other countries without major modifications.

  12. Agricultural Electricity. Electric Motors. Student Manual.

    Science.gov (United States)

    Benson, Robert T.

    Addressed to the student, this manual, which includes supplementary diagrams, discusses the following topics and principles: Electromagnetic fields, electromagnets, parts of an electric motor, determining speed of an electric motor, types of electric motors in common use (split-phase, capacitor, repulsion-induction, three-phase), the electric…

  13. 76 FR 647 - Energy Conservation Program: Test Procedures for Electric Motors and Small Electric Motors

    Science.gov (United States)

    2011-01-05

    ... Energy 10 CFR Part 431 Energy Conservation Program: Test Procedures for Electric Motors and Small Electric Motors; Proposed Rule #0;#0;Federal Register / Vol. 76, No. 3 / Wednesday, January 5, 2011... Procedures for Electric Motors and Small Electric Motors AGENCY: Office of Energy Efficiency and Renewable...

  14. SELECTION OF METHOD FOR REGULATION OF TRACTOR PROPULSION ASYNCHRONOUS ELECTRIC MOTOR AND CONSTRUCTION OF MECHANICAL CHARACTERISTICS

    Directory of Open Access Journals (Sweden)

    Ch. I. Zhdanovich

    2015-01-01

    Full Text Available Nowadays the work is in progress to develop wheeled and caterpillar tractors with electromechanical transmission. Range of changes in transmission gear ratio while using propulsion electric motor depends on mechanical characteristics of a tractor propulsion electric motor which is equipped with electromechanical transmission. In case when the range is rather high then it is possible to minimize number of gearings in the tractor gearing box or exclude its usage at all. Type of the applied propulsion electric motor and regulation method specify type of mechanical characteristics (characteristics family of the propulsion electric motor.The paper considers a propulsion asynchronous electric motor with frequency control. While using frequency control it is possible to regulate electric motor revolutions by mutual changes in voltage and voltage frequency. There are various laws of mutual changes in voltage and frequency (regulation laws. Selection of a regulation law influences on type of mechanical characteristics of a propulsion electric motor. Application of any law can be admissible only for some specific range of voltage frequency otherwise it is possible to exceed some parameters (for example, admissible voltage in the winding of electric motor stator. It is necessary to ensure the required moment within wide range for a tractor propulsion electric motor. In this case losses in the electric motor must be minimal. Losses in the rotor of the propulsion asynchronous electric motor are directly proportional to its sliding and its best propulsion and mechanical properties of a mobile machine will be ensured in the case when sliding is preserved at a constant value. According to these reasons selection of regulation laws has been carried out for operation of the propulsion asynchronous electric motor with nominal sliding and mechanical characteristics at nominal sliding is conventionally called a nominal characteristics.The paper analyzes the possible

  15. Nano-Magnets and Additive Manufacturing for Electric Motors

    Science.gov (United States)

    Misra, Ajay K.

    2014-01-01

    High power density is required for application of electric motors in hybrid electric propulsion. Potential path to achieve high power density in electric motors include advanced materials, lightweight thermal management, lightweight structural concepts, high power density power electronics, and advanced manufacturing. This presentation will focus on two key technologies for achieving high power density, advanced magnets and additive manufacturing. The maximum energy product in current magnets is reaching their theoretical limits as a result of material and process improvements. Future improvements in the maximum energy product for magnets can be achieved through development of nanocomposite magnets combining the hard magnetic phase and soft magnetic phase at the nanoscale level. The presentation will provide an overview of the current state of development for nanocomposite magnets and the future path for doubling the maximum energy product. The other part of the presentation will focus on the role of additive manufacturing in fabrication of high power density electric motors. The presentation will highlight the potential opportunities for applying additive manufacturing to fabricate electric motors.

  16. Axial Field Electric Motor and Method

    National Research Council Canada - National Science Library

    Cho, Chahee P

    2007-01-01

    .... A hybrid field, brushless, permanent magnet electric motor utilizing a rotor with two sets of permanent magnets oriented such that the flux produced by the two sets of magnets is perpendicular to each...

  17. Magnetic Signature of Brushless Electric Motors

    National Research Council Canada - National Science Library

    Clarke, David

    2006-01-01

    Brushless electric motors are used in a number of underwater vehicles. When these underwater vehicles are used for mine clearance operations the magnetic signature of the brushless motors is important...

  18. Development of Ulta-Efficient Electric Motors

    Energy Technology Data Exchange (ETDEWEB)

    Shoykhet, B. (Baldor Comp.); Schiferl, R. (Baldor Comp.); Duckworth, R.; Rey, C.M.; Schwenterly, S.W.; Gouge, M.J.

    2008-05-01

    Electric motors utilize a large amount of electrical energy in utility and industrial applications. Electric motors constructed with high temperature superconducting (HTS) materials have the potential to dramatically reduce electric motor size and losses. HTS motors are best suited for large motor applications at ratings above 1000 horsepower (hp), where the energy savings from the efficiency improvement can overcome the additional power required to keep the superconductors on the rotor cooled. Large HTS based motors are expected to be half the volume and have half the losses of conventional induction motors of the same rating. For a 5000 hp industrial motor, this energy savings can result in $50,000 in operating cost savings over the course of a single year of operation. Since large horsepower motors utilize (or convert) about 30% of the electrical power generated in the United States and about 70% of large motors are candidates for replacement by HTS motors, the annual energy savings potential through the utilization of HTS motors can be up to $1 Billion in the United States alone. Research in the application of HTS materials to electric motors has lead to a number of HTS motor prototypes yet no industrial HTS motor product has yet been introduced. These motor demonstrations have been synchronous motors with HTS field windings, on the rotor. Figure 1-1 shows a solid model rendering of this type of motor. The rotor winding is made with HTS coils that are held at cryogenic temperature by introducing cooling fluid from the cryocooler to the rotor through a transfer coupling. The stator winding is made of copper wire. The HTS winding is thermally isolated from the warm armature and motor shafts by a vacuum insulation space and through the use of composite torque tubes. The stator in Figure 1-1 is an air core stator in that the stator teeth and a small part of the yoke is made up of nonmagnetic material so the magnetic fields distribute themselves as if in air

  19. quarters

    Directory of Open Access Journals (Sweden)

    Elena Grigoryeva

    2016-10-01

    Full Text Available Are there many words combining both space and time? A quarter is one of such rare words: it means both a part of the city space and a period of the year. A regular city has parts bordered by four streets. For example, Chita is a city with an absolutely orthogonal historical center. This Utopian city was designed by Decembrists in the depth of Siberian ore-mines (120. The 130 Quarter in Irkutsk is irregular from its inception because of its triangular form. Located between two roads, the forked quarter was initially bordered by flows along the west-east axis – the main direction of the country. That is why it appreciated the gift for the 350 anniversary of its transit existence – a promenade for an unhurried flow of pedestrians. The quarter manages this flow quite well, while overcoming the difficulties of new existence and gathering myths (102. Arousing many expectations, the “Irkutsk’s Quarters” project continues the theme that was begun by the 130 Quarter and involved regeneration, revival and search for Genius Loci and the key to each single quarter (74. Beaded on the trading axis, these shabby and unfriendly quarters full of rubbish should be transformed for the good of inhabitants, guests and the small business. The triptych by Lidin, Rappaport and Nevlyutov is about happiness of urbanship and cities for people, too (58. The City Community Forum was also devoted to the urban theme (114. Going through the last quarter of the year, we hope that Irkutsk will keep to the right policy, so that in the near future the wooden downtown quarters will become its pride, and the design, construction and investment complexes will join in desire to increase the number of comfortable and lively quarters in our city. The Baikal Beam will get one more landmark: the Smart School (22 for Irkutsk’s children, including orphans, will be built in several years on the bank of Chertugeevsky Bay.

  20. Electric Motor Thermal Management R&D

    Energy Technology Data Exchange (ETDEWEB)

    Bennion, Kevin

    2016-06-07

    Thermal management enables more efficient and cost-effective motors. This Annual Merit Review presentation describes the technical accomplishments and progress in electric motor thermal management R&D over the last year. This project supports a broad industry demand for data, analysis methods, and experimental techniques to improve and better understand motor thermal management.

  1. Hall devices improve electric motor efficiency

    Science.gov (United States)

    Haeussermann, W.

    1979-01-01

    Efficiency of electric motors and generators is reduced by radial magnetic forces created by symmetric fields within device. Forces are sensed and counteracted by Hall devices on excitation or control windings. Hall generators directly measure and provide compensating control of anu asymmetry, eliminating additional measurements needed for calibration feedback control loop.

  2. Oscillating electrical motors, application and theory

    Energy Technology Data Exchange (ETDEWEB)

    Kudarauskas, S. [Klaipeda University, Department of Electrical Engineering, Klaipeda (Lithuania)

    2000-08-01

    The article analyses classification of electrical machines by the temporal and spatial properties of mechanical movement. It is purposive to group the machines by movement temporal properties thus marking out an independent class of oscillating machines. The article demonstrates operation principles, design diversity and practical utilisation of these machines. Principles of theoretical analysis of main regime (i.e. steady oscillations) are presented. The appendix presents rationale of analogy between electrical circuit and magnetic circuit from energy standpoint. (orig.)

  3. Electric Motors Maintenance Planning From Its Operating Variables

    Science.gov (United States)

    Rodrigues, Francisco; Fonseca, Inácio; Farinha, José Torres; Ferreira, Luís; Galar, Diego

    2017-09-01

    The maintenance planning corresponds to an approach that seeks to maximize the availability of equipment and, consequently, increase the levels of competitiveness of companies by increasing production times. This paper presents a maintenance planning based on operating variables (number of hours worked, duty cycles, number of revolutions) to maximizing the availability of operation of electrical motors. The reading of the operating variables and its sampling is done based on predetermined sampling cycles and subsequently is made the data analysis through time series algorithms aiming to launch work orders before reaching the variables limit values. This approach is supported by tools and technologies such as logical applications that enable a graphical user interface for access to relevant information about their Physical Asset HMI (Human Machine Interface), including the control and supervision by acquisition through SCADA (Supervisory Control And data acquisition) data, also including the communication protocols among different logical applications.

  4. ELECTRIC MOTORS MAINTENANCE PLANNING FROM ITS OPERATING VARIABLES

    Directory of Open Access Journals (Sweden)

    Francisco RODRIGUES

    2017-07-01

    Full Text Available The maintenance planning corresponds to an approach that seeks to maximize the availability of equipment and, conse-quently, increase the levels of competitiveness of companies by increasing production times. This paper presents a maintenance planning based on operating variables (number of hours worked, duty cycles, number of revolutions to maximizing the availability of operation of electrical motors. The reading of the operating variables and its sampling is done based on predetermined sampling cycles and subsequently is made the data analysis through time series algo-rithms aiming to launch work orders before reaching the variables limit values. This approach is supported by tools and technologies such as logical applications that enable a graphical user interface for access to relevant information about their Physical Asset HMI (Human Machine Interface, including the control and supervision by acquisition through SCADA (Supervisory Control And data acquisition data, also including the communication protocols among different logical applications.

  5. Electric motors and actuators at cryogenic tempertures

    Science.gov (United States)

    Bugeat, J. P.; Macaigne, J.; Valentian, D.

    A small electric motor and an actuating mechanism for use at temperatures around 4.2 K under ultra high vacuum was tested in order to assess the feasibility of such a driving mechanism working in the coldest part of a spacecraft cryostat. A variable reluctance stepping motor driving a simple screw nut mechanism was used. Dry lubrication was provided by polyimide slide bearings and nut and by composite retainer roller bearings. Motor and mechanism sustained extended tests at liquid helium temperature with continuous operation for 8 hr periods and faultless restart after 16 hr rest periods. Power consumption was reduced to 15 mV leading to low liquid helium comsumption. Post test analysis indicates no change in motor characteristics and no damage to bearings, screw and nut.

  6. 76 FR 17577 - Increased Scope of Coverage for Electric Motors

    Science.gov (United States)

    2011-03-30

    ... Part 431 RIN 1904-AC28 Increased Scope of Coverage for Electric Motors AGENCY: Office of Energy... rulemaking to set energy conservation standards for electric motors. Specifically, DOE seeks information to assist DOE in determining whether to develop energy conservation standards for certain types of electric...

  7. Quality electric motor repair: A guidebook for electric utilities

    Energy Technology Data Exchange (ETDEWEB)

    Schueler, V.; Douglass, J.

    1995-08-01

    This guidebook provides utilities with a resource for better understanding and developing their roles in relation to electric motor repair shops and the industrial and commercial utility customers that use them. The guidebook includes information and tools that utilities can use to raise the quality of electric motor repair practices in their service territories.

  8. System for Monitoring and Analysis of Vibrations at Electric Motors

    Directory of Open Access Journals (Sweden)

    Gabriela Rață

    2014-09-01

    Full Text Available The monitoring of vibration occurring at the electric motors is of paramount importance to ensure their optimal functioning. This paper presents a monitoring system of vibrations occurring at two different types of electric motors, using a piezoelectric accelerometer (ICP 603C11 and a data acquisition board from National Instruments (NI 6009. Vibration signals taken from different parts of electric motors are transferred to computer through the acquisition board. A virtual instrument that allows real-time monitoring and Fourier analysis of signals from the vibration sensor was implemented in LabVIEW.

  9. Ultra-Efficient and Power-Dense Electric Motors

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-01-01

    This factsheet describes a research project whose goal is to develop line-start and line-run constant-speed electric motors and simple-to-control electric motors with the goal of obtaining at least a 30% reduction in motor losses as compared to conventional energy-efficient induction motors and a 15% reduction in motor losses as compared to NEMA Premium® efficient induction motors.

  10. Electric Motor Thermal Management R&D. Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Bennion, Kevin [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-04-01

    With the push to reduce component volumes, lower costs, and reduce weight without sacrificing performance or reliability, the challenges associated with thermal management increase for power electronics and electric motors. Thermal management for electric motors will become more important as the automotive industry continues the transition to more electrically dominant vehicle propulsion systems. The transition to more electrically dominant propulsion systems leads to higher-power duty cycles for electric drive systems. Thermal constraints place significant limitations on how electric motors ultimately perform, and as thermal management improves, there will be a direct trade-off between motor performance, efficiency, cost, and the sizing of electric motors to operate within the thermal constraints. The goal of this research project is to support broad industry demand for data, analysis methods, and experimental techniques to improve and better understand motor thermal management. Work in FY15 focused on two areas related to motor thermal management: passive thermal performance and active convective cooling. Passive thermal performance emphasized the thermal impact of materials and thermal interfaces among materials within an assembled motor. The research tasks supported the publication of test methods and data for thermal contact resistances and direction-dependent thermal conductivity within an electric motor. Active convective cooling focused on measuring convective heat-transfer coefficients using automatic transmission fluid (ATF). Data for average convective heat transfer coefficients for direct impingement of ATF jets was published. Also, experimental hardware for mapping local-scale and stator-scale convective heat transfer coefficients for ATF jet impingement were developed.

  11. Development of advanced winding condition control technology of electric motors based on pulsed method

    Directory of Open Access Journals (Sweden)

    Alexey V. Mytnikov

    2017-09-01

    Full Text Available More than 80 percent of all electrical energy customers are electric motors. Therefore one of the prospects of resource-effective technologies in power industry is control of rotating electric equipment condition. Winding defects are one of the main causes of electric motor failures. Reliable control of winding condition is an urgent task of modern electrical engineering technology. The present article is devoted to the research of pulsed method application of transformer winding control for electric motor winding condition control. The procedure of winding condition control technology is described. The proposed method is based on the known pulsed method. The essential difference between the two methods is that only one probing impulse is used which is a probing impulse and response signal at once. The results of diagnostic procedure research at different winding defects are given. It is established that the place of winding damage corresponds to characteristic impulse changes. The defect of definite types causes specific changes of the probing impulse form. Therefore, different winding defects could be found with high accuracy along winding.

  12. Advanced Power Electronics and Electric Motors Annual Report -- 2013

    Energy Technology Data Exchange (ETDEWEB)

    Narumanchi, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bennion, K. [National Renewable Energy Lab. (NREL), Golden, CO (United States); DeVoto, D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Moreno, G. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Rugh, J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Waye, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-01-01

    This report describes the research into advanced liquid cooling, integrated power module cooling, high temperature air cooled power electronics, two-phase cooling for power electronics, and electric motor thermal management by NREL's Power Electronics group in FY13.

  13. The Magnetic Fields of Electric Motors and their EMC

    Directory of Open Access Journals (Sweden)

    Irena Kovacova

    2008-01-01

    Full Text Available This paper deals with the computer analysis of the electromagnetic compatibility (EMC problems focused on the area of electrical machines, which can also disclose the concerning startling facts. A problem of interference between electric motor and surrounding space caused by the electromagnetic field radiation is discussed too.

  14. 10 CFR 431.383 - Enforcement process for electric motors.

    Science.gov (United States)

    2010-01-01

    ... distribution of the basic model tested under the provisions of this paragraph from the time the manufacturer... 10 Energy 3 2010-01-01 2010-01-01 false Enforcement process for electric motors. 431.383 Section 431.383 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN...

  15. Thermal Management of Power Electronics and Electric Motors for Electric-Drive Vehicles (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Narumanchi, S.

    2014-09-01

    This presentation is an overview of the power electronics and electric motor thermal management and reliability activities at NREL. The focus is on activities funded by the Department of Energy Vehicle Technologies Office Advanced Power Electronics and Electric Motors Program.

  16. 78 FR 38455 - Energy Conservation Program: Test Procedures for Electric Motors

    Science.gov (United States)

    2013-06-26

    .... DOE finalized key provisions related to small electric motor testing in a 2009 final rule at 74 FR... for Electric Motors; Proposed Rule #0;#0;Federal Register / Vol. 78, No. 123 / Wednesday, June 26... Program: Test Procedures for Electric Motors AGENCY: Office of Energy Efficiency and Renewable Energy...

  17. 78 FR 75961 - Energy Conservation Program: Test Procedures for Electric Motors

    Science.gov (United States)

    2013-12-13

    ... electric motors. 73 FR 78220. After considering comments from interested parties, DOE finalized key... for Electric Motors; Final Rule #0;#0;Federal Register / Vol. 78 , No. 240 / Friday, December 13, 2013... Program: Test Procedures for Electric Motors AGENCY: Office of Energy Efficiency and Renewable Energy...

  18. 77 FR 11598 - Thermal Overload Protection for Electric Motors on Motor-Operated Valves

    Science.gov (United States)

    2012-02-27

    ... COMMISSION Thermal Overload Protection for Electric Motors on Motor-Operated Valves AGENCY: Nuclear... for Electric Motors on Motor-Operated Valves.'' This regulatory guide describes a method acceptable to... devices that are integral with the motor starter for electric motors on motor-operated valves. ADDRESSES...

  19. Electric Motor Thermal Management for Electric Traction Drives (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Bennion, K.; Cousineau, J.; Moreno, G.

    2014-09-01

    Thermal constraints place significant limitations on how electric motors ultimately perform. Finite element analysis and computational fluid dynamics modeling approaches are being increasingly utilized in the design and analysis of electric motors. As the models become more sophisticated, it is important to have detailed and accurate knowledge of material thermal properties and convective heat transfer coefficients. In this work, the thermal properties and inter-lamination thermal contact resistances were measured for different stator lamination materials. Also, convective heat transfer coefficients of automatic transmission fluid (ATF) jets were measured to better understand the heat transfer of ATF impinging on motor copper windings. Experiments were carried out at various ATF temperatures and jet velocities to quantify the influence of these parameters on heat transfer coefficients.

  20. Electrifying the construction process : Replacing diesel engines with electric motors

    OpenAIRE

    Willerström, Jakob; Linde, Adam; Fagrell, Johannes

    2015-01-01

    Diesel engines are commonly used in construction machines, for example excavators. In a diesel engine, the combustion of diesel is a process with a considerable environmental impact, with high amounts of emitted greenhouse gases. The bachelor thesis creates a model that investigates the potential of decreasing the environmental impact when replacing diesel engines with electric motors in the construction phase of the construction process of buildings. The model was made in three steps. In the...

  1. Electric Motor Thermal Management R&D (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Bennion, K.

    2014-11-01

    Thermal constraints place significant limitations on how electric motors ultimately perform. Without the ability to remove heat, the motor cannot operate without sacrificing performance, efficiency, and reliability. Finite element analysis and computational fluid dynamics modeling approaches are being increasingly utilized in the design and analysis of electric motors. As the models become more sophisticated, it is important to have detailed and accurate knowledge of both the passive thermal performance and the active cooling performance. In this work, we provide an overview of research characterizing both passive and active thermal elements related to electric motor thermal management. To better characterize the passive thermal performance, the effective thermal properties and inter-lamination thermal contact resistances were measured for different stator lamination materials. The active cooling performance of automatic transmission fluid (ATF) jets was also measured to better understand the heat transfer coefficients of ATF impinging on motor copper windings. Ford's Mercon LV was the ATF evaluated in this study. The presentation provides an overview of prior work with a focus on describing future plans for research to be performed during FY15.

  2. Energy Savings Potential and Opportunities for High-Efficiency Electric Motors in Residential and Commercial Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Goetzler, William [Navigant Consulting, Inc., Burlington, MA (United States); Sutherland, Timothy [Navigant Consulting, Inc., Burlington, MA (United States); Reis, Callie [Navigant Consulting, Inc., Burlington, MA (United States)

    2013-12-04

    This report describes the current state of motor technology and estimates opportunities for energy savings through application of more advanced technologies in a variety of residential and commercial end uses. The objectives of this report were to characterize the state and type of motor technologies used in residential and commercial appliances and equipment and to identify opportunities to reduce the energy consumption of electric motor-driven systems in the residential and commercial sectors through the use of advanced motor technologies. After analyzing the technical savings potential offered by motor upgrades and variable speed technologies, recommended actions are presented.

  3. IEMDC IN-LINE ELECTRIC MOTOR DRIVEN COMPRESSOR

    Energy Technology Data Exchange (ETDEWEB)

    Michael J. Crowley; Prem N. Bansal

    2004-10-01

    This report contains the final project summary and deliverables required by the award for the development of an In-line Electric Motor Driven Compressor (IEMDC). Extensive work was undertaken during the course of the project to develop the motor and the compressor section of the IEMDC unit. Multiple design iterations were performed to design an electric motor for operation in a natural gas environment and to successfully integrate the motor with a compressor. During the project execution, many challenges were successfully overcome in order to achieve the project goals and to maintain the system design integrity. Some of the challenges included limiting the magnitude of the compressor aerodynamic loading for appropriate sizing of the magnetic bearings, achieving a compact motor rotor size to meet the rotor dynamic requirements of API standards, devising a motor cooling scheme using high pressure natural gas, minimizing the impact of cooling on system efficiency, and balancing the system thrust loads for the magnetic thrust bearing. Design methods that were used on the project included validated state-of-the-art techniques such as finite element analysis and computational fluid dynamics along with the combined expertise of both Curtiss-Wright Electro-Mechanical Corporation and Dresser-Rand Company. One of the most significant areas of work undertaken on the project was the development of the unit configuration for the system. Determining the configuration of the unit was a significant step in achieving integration of the electric motor into a totally enclosed compression system. Product review of the IEMDC unit configuration was performed during the course of the development process; this led to an alternate design configuration. The alternate configuration is a modular design with the electric motor and compressor section each being primarily contained in its own pressure containing case. This new concept resolved the previous conflict between the aerodynamic flow

  4. Electrical motor/generator drive apparatus and method

    Science.gov (United States)

    Su, Gui Jia

    2013-02-12

    The present disclosure includes electrical motor/generator drive systems and methods that significantly reduce inverter direct-current (DC) bus ripple currents and thus the volume and cost of a capacitor. The drive methodology is based on a segmented drive system that does not add switches or passive components but involves reconfiguring inverter switches and motor stator winding connections in a way that allows the formation of multiple, independent drive units and the use of simple alternated switching and optimized Pulse Width Modulation (PWM) schemes to eliminate or significantly reduce the capacitor ripple current.

  5. Implementation of a Non-Metallic Barrier in an Electric Motor

    Science.gov (United States)

    M?Sadoques, George; Carra, Michael; Beringer, Woody

    2012-01-01

    Electric motors that run in pure oxygen must be sealed, or "canned," for safety reasons to prevent the oxygen from entering into the electrical portion of the motor. The current canning process involves designing a metallic barrier around the rotor to provide the separation. This metallic barrier reduces the motor efficiency as speed is increased. In higher-speed electric motors, efficiency is greatly improved if a very thin, nonmetallic barrier can be utilized. The barrier thickness needs to be approximately 0.025-in. (.0.6-mm) thick and can be made of a brittle material such as glass. The motors, however, designed for space applications are typically subject to high-vibration environments. A fragile, non-metallic barrier can be utilized in a motor assembly if held in place by a set of standard rubber O-ring seals. The O-rings provide the necessary sealing to keep oxygen away from the electrical portion of the motor and also isolate the fragile barrier from the harsh motor vibration environment. The compliance of the rubber O-rings gently constrains the fragile barrier and isolates it from the harsh external motor environment. The use of a non-metallic barrier greatly improves motor performance, especially at higher speeds, while isolating the electronics from the working fluid with an inert liner.

  6. APPLICATION OF POINT-CENTERED QUARTER METHOD FOR MEASUREMENT THE BEACH CRAB (OCYPODE SPP DENSITY

    Directory of Open Access Journals (Sweden)

    Hanifa Marisa

    2015-10-01

    Full Text Available Point Quarter Method is a plant community structure measurement procedure. The technique is base on measurement of distance of four plants or trees in every quarter that is made by four space in the cross line sampling field studies. In forest sampling, point centered quarter methods is considered as the efficient, reliable and accurate data, not only for mean distance and density, but for frequency and dominance of species. So it is important to try wether these method ould be applicated to animal, especially crab. These method was applicated for crab population in Padang Beach at December 22nd, 2014. Ten points quartered were made and the distance of every Ocypode sp crab burrow was counted by ruler. Mean distance of crabs burrow gained by divided of total number of quarter (20 with mean distance of every burrow to the point. Density per hectare is 10,000 m divided by quadratic of mean distance. Mean distance of burrow to points were counted and prediction of population per hectare could be found. In these case, mean distance was: 0.41 m and crab population is :59,488.34 individu per hectare. Compared to other species , eg Scylla serrata, its population is bigger, eventhough the condition of beach is polluted and wasted

  7. Cooling of Electric Motors Used for Propulsion on SCEPTOR

    Science.gov (United States)

    Christie, Robert J.; Dubois, Arthur; Derlaga, Joseph M.

    2017-01-01

    NASA is developing a suite of hybrid-electric propulsion technologies for aircraft. These technologies have the benefit of lower emissions, diminished noise, increased efficiency, and reduced fuel burn. These will provide lower operating costs for aircraft operators. Replacing internal combustion engines with distributed electric propulsion is a keystone of this technology suite, but presents many new problems to aircraft system designers. One of the problems is how to cool these electric motors without adding significant aerodynamic drag, cooling system weight or fan power. This paper discusses the options evaluated for cooling the motors on SCEPTOR (Scalable Convergent Electric Propulsion Technology and Operations Research): a project that will demonstrate Distributed Electric Propulsion technology in flight. Options for external and internal cooling, inlet and exhaust locations, ducting and adjustable cowling, and axial and centrifugal fans were evaluated. The final design was based on a trade between effectiveness, simplicity, robustness, mass and performance over a range of ground and flight operation environments.

  8. Method and system for operating an electric motor

    Science.gov (United States)

    Gallegos-Lopez, Gabriel; Hiti, Silva; Perisic, Milun

    2013-01-22

    Methods and systems for operating an electric motor having a plurality of windings with an inverter having a plurality of switches coupled to a voltage source are provided. A first plurality of switching vectors is applied to the plurality of switches. The first plurality of switching vectors includes a first ratio of first magnitude switching vectors to second magnitude switching vectors. A direct current (DC) current associated with the voltage source is monitored during the applying of the first plurality of switching vectors to the plurality of switches. A second ratio of the first magnitude switching vectors to the second magnitude switching vectors is selected based on the monitoring of the DC current associated with the voltage source. A second plurality of switching vectors is applied to the plurality of switches. The second plurality of switching vectors includes the second ratio of the first magnitude switching vectors to the second magnitude switching vectors.

  9. Walking the Torque: Proposed Work Plan for Energy-Efficiency Policy Opportunities for Electric Motor-Driven Systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Electric motor-driven system is the largest single energy end use accounting for more than 40% of global electricity consumption. This paper sets out an ambitious but achievable target with the global work plan to improve the energy efficiency of electric motor-driven system by 10% to 15% based on the finding of working paper ''Energy-Efficiency Policy Opportunities for Electric Motor-Driven Systems (Waide et al., 2011)''. If governments commit to the proposed work plan immediately and maintain resourcing levels, this could be achieved by 2030 and it would be equivalent to reducing total global electricity use by around 5%. The proposed work plan of this paper is to align regulatory settings within a globally applicable scheme. The IEA believes this target can only be achieved through global co-operation leading to aligned national policy settings that countries can unlock the economies of scale that will result from using more energy efficient EMDS.

  10. 10 CFR 431.445 - Determination of small electric motor efficiency.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Determination of small electric motor efficiency. 431.445 Section 431.445 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN... electric motor efficiency. (a) Scope. When a party determines the energy efficiency of a small electric...

  11. AC electric motors control advanced design techniques and applications

    CERN Document Server

    Giri, Fouad

    2013-01-01

    The complexity of AC motor control lies in the multivariable and nonlinear nature of AC machine dynamics. Recent advancements in control theory now make it possible to deal with long-standing problems in AC motors control. This text expertly draws on these developments to apply a wide range of model-based control designmethods to a variety of AC motors. Contributions from over thirty top researchers explain how modern control design methods can be used to achieve tight speed regulation, optimal energetic efficiency, and operation reliability and safety, by considering online state var

  12. Composite Ceramic Superconducting Wires for Electric Motor Applications

    Science.gov (United States)

    1988-12-30

    occurs slowly enough to avoid ignition. The tetra - 3 gonal YBa2 Cu307 . phase appears to be more reactive than the orthorhombic phase. The ignition...993?C PAK . 6 PASSES 𔃻OC. a MRS. 0, G0OD PELT SPU TWO9 TV NOPE 02232-41. 3496-77-7 02114/PA 991*C PEAK, 8 PASSES 40C, & MRS. 02 G000 7.il1491m. 5.15

  13. Electric motors with linear and composed displacement; Moteurs electriques a mouvement lineaire et compose

    Energy Technology Data Exchange (ETDEWEB)

    Kant, M. [Acdemie Europeenne des Sciences, 75 - Paris (France)

    2004-02-01

    The development of robotics and the replacement of complex mechanical gears by 'electronic axes' has led to the development of motors combining rotation and translation movements (linear rotating motors) and more generally of motors capable to perform multi-directional movements (composed displacement motors). This article presents this kind of motors: 1 - general presentation: theoretical recalls, possible configurations of electric motors, evolution; 2 - linear motor: configuration, basic operating principle, main differences between linear and rotating motors; 3 - special effects: end effects (finished length, finished width), penetration effect, resulting magnetic field configuration inside the air gap; 4 - motors with two mechanical degrees of freedom (rotation-translation); 5 - motors with three mechanical degrees of freedom (spherical motors); 6 - optimization of open magnetic circuit motors; 7 - different industrialized structures; 8 - applications; 9 - mathematical appendix. (J.S.)

  14. ELECTRIC MOTOR DIAGNOSTICS OF SWITCHES BASED ON THE NEURAL NETWORK DATA MODELING THE SPECTRAL DECOMPOSITION OF THE CURRENTS

    Directory of Open Access Journals (Sweden)

    O. M. Shvets

    2009-07-01

    Full Text Available The method of automated diagnostics of electric motors is offered. It uses a neural network revealing the electric motor faults on the basis of analysis of frequency spectrum of current flowing through the motor.

  15. Electric motor systems in developing countries: Opportunities for efficiency improvement

    Energy Technology Data Exchange (ETDEWEB)

    Meyers, S.; Monahan, P.; Lewis, P.; Greenberg, S. [Lawrence Berkeley Lab., CA (United States); Nadel, S. [American Council for an Energy-Efficient Economy, Washington, DC (United States)

    1993-08-01

    This report presents an overview of the current status and efficiency improvement potential of industrial motor systems in developing countries. Better management of electric motor systems is of particular relevance in developing countries, where improved efficiency can lead to increased productivity and slower growth in electricity demand. Motor systems currently consume some 65--80% of the industrial electricity in developing countries. Drawing on studies from Thailand, India, Brazil, China, Pakistan, and Costa Rica, we describe potential efficiency gains in various parts of the motor system, from the electricity delivery system through the motor to the point where useful work is performed. We report evidence of a significant electricity conservation potential. Most of the efficiency improvement methods we examine are very cost-effective from a societal viewpoint, but are generally not implemented due to various barriers that deter their adoption. Drawing on experiences in North America, we discuss a range of policies to overcome these barriers, including education, training, minimum efficiency standards, motor efficiency testing protocols, technical assistance programs, and financial incentives.

  16. Actions to promote energy efficient electric motors. Motors study group

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, A.T. de [Coimbra Univ. (PT). Inst. of Systems and Robotics (ISR)

    1996-10-01

    Motor electricity consumption is influenced by many factors including: motor efficiency, motor speed controls, power supply quality, harmonics, systems oversizing, distribution network, mechanical transmission system, maintenance practices, load management and cycling, and the efficiency of the end-use device (e.g. fan, pump, etc.). Due to their importance, an overview of these factors is presented in this report. This study also describes the electricity use in the industrial and tertiary sectors and the electricity consumption associated with the different types of electric motors systems in the Member States of the European Union, as well as estimated future evolution until 2010. The studies for individual countries were carried out by the different partners of the motors study group at a previous stage. The study has found that there is a lack of accurate information about the motor electricity consumption, installed motor capacity and the motor market in almost all the European Union countries and only some general statistical sources are available. There is little field data, which is mainly available in Denmark, France, Italy and the Netherlands. Due to this lack of primary information, some common assumptions were made, based on the experience of the members of the study group. This lack of end-use characterisation data shows the need for improvement from the point of view of current knowledge. It is therefore recommended that further research is undertaken to arrive at more accurate figures. These could be the basis for a better understanding for motor use in practice and - as a consequence - for a more precise appraisal of potentials and barriers to energy efficiency. (orig.)

  17. MICROPROCESSOR-BASED PROTECTION DEVICE ELECTRIC MOTORS AGAINST SHORT CIRCUIT CURRENTS

    Directory of Open Access Journals (Sweden)

    D. V. Ustymenko

    2010-03-01

    Full Text Available The microprocessor device of protection of electric chains of electric motors from short circuit currents, in which switching-off of a short circuit current is carried out before it achieves a shock value, is presented.

  18. High-Temperature Switched-Reluctance Electric Motor

    Science.gov (United States)

    Montague, Gerald; Brown, Gerald; Morrison, Carlos; Provenza, Andy; Kascak, Albert; Palazzolo, Alan

    2003-01-01

    An eight-pole radial magnetic bearing has been modified into a switched-reluctance electric motor capable of operating at a speed as high as 8,000 rpm at a temperature as high as 1,000 F (=540 C). The motor (see figure) is an experimental prototype of starter-motor/generator units that have been proposed to be incorporated into advanced gas turbine engines and that could operate without need for lubrication or active cooling. The unique features of this motor are its electromagnet coils and, to some extent, its control software. Heretofore, there has been no commercial-off-the-shelf wire capable of satisfying all of the requirements for fabrication of electromagnet coils capable of operation at temperatures up to 1,000 F (=540 C). The issues addressed in the development of these electromagnet coils included thermal expansion, oxidation, pliability to small bend radii, micro-fretting, dielectric breakdown, tensile strength, potting compound, thermal conduction, and packing factor. For a test, the motor was supported, along with a rotor of 18 lb (.8-kg) mass, 3-in. (.7.6-cm) diameter, 21-in. (.53-cm) length, on bearings packed with high-temperature grease. The motor was located at the mid span of the rotor and wrapped with heaters. The motor stator was instrumented with thermocouples. At the time of reporting the information for this article, the motor had undergone 14 thermal cycles between room temperature and 1,000 F (.540 C) and had accumulated operating time >27.5 hours at 1,000 F (=540 C). The motor-controller hardware includes a personal computer equipped with analog-to-digital input and digital-to-analog output cards. The controller software is a C-language code that implements a switched-reluctance motor-control principle: that is, it causes the coils to be energized in a sequence timed to generate a rotating magnetic flux that creates a torque on a scalloped rotor. The controller can operate in an open- or closed-loop mode. In addition, the software has

  19. Application of lavender and rosemary essential oils improvement of the microbiological quality of chicken quarters

    Directory of Open Access Journals (Sweden)

    Jana Petrová

    2015-12-01

    in air condition. The initial Enterobacteriacea genera value of chicken quarter was 2.00 log CFU.g-1 on 0 day. Presences of these bacteria were found on all groups at 16 days. The results of this present study suggest the possibility of application the Lavandula angustifolia and Rosmarinus officinalis essential oil as natural food preservatives and potential sources of antimicrobial ingredients for food industry. 

  20. Diagnosis of traction electric motor at irregularity in speed of anchor rotation

    Directory of Open Access Journals (Sweden)

    D.V. Cyernyayev

    2013-06-01

    Full Text Available Purpose. To offer a complex diagnostic parameter (or system of parameters that would allow determining the fault of electric traction motor as well as electromagnetic and mechanical nature. Methodology. Technology transition to maintenance and repair of equipment in accordance with its actual condition are developed rapidly in the world practice in recent years. Control of equipment and forecasting of its technical condition with the use of non-destructive testing and diagnosis in-place methods is the basis of such technologies. In operation the reliability level of electrical machines including traction electric motor is very difficult to maintain. Analyzing failures of rolling stock, which arise from the operation, we can see that traction electric motors are the least reliable nodes. Diagnostics of traction electric motor at irregularity in speed of anchor rotation is proposed. A measurement device for irregularity in speed of anchor rotation was developed. Findings. An experimental research in order to determine the irregularity in speed of anchor armature shaft rotation and coupling of irregularity in speed of anchor rotation with traction electric motors nodes failures was executed. The experimental dependence of the waveform uneven rotation anchor for engines with different technical conditions. Originality. A method for diagnosis of traction electric motors at irregularity in speed of anchor armature shaft rotation was first proposed. This method after further improvement can be used at bench test of engines in their work without load and for the quality of the repair. Practical value. The device for detecting defects of the traction electric motor nodes as well as electromagnetic and mechanical nature without engine disassembly may be used for control of engine assembly after repair, and at testing of traction electric motor without load.

  1. Dynamic parameter identification of robot arms with servo-controlled electrical motors

    Science.gov (United States)

    Jiang, Zhao-Hui; Senda, Hiroshi

    2005-12-01

    This paper addresses the issue of dynamic parameter identification of the robot manipulator with servo-controlled electrical motors. An assumption is made that all kinematical parameters, such as link lengths, are known, and only dynamic parameters containing mass, moment of inertia, and their functions need to be identified. First, we derive dynamics of the robot arm with a linear form of the unknown dynamic parameters by taking dynamic characteristics of the motor and servo unit into consideration. Then, we implement the parameter identification approach to identify the unknown parameters with respect to individual link separately. A pseudo-inverse matrix is used for formulation of the parameter identification. The optimal solution is guaranteed in a sense of least-squares of the mean errors. A Direct Drive (DD) SCARA type industrial robot arm AdeptOne is used as an application example of the parameter identification. Simulations and experiments for both open loop and close loop controls are carried out. Comparison of the results confirms the correctness and usefulness of the parameter identification and the derived dynamic model.

  2. Technological management of efficient use of electric motors: an important tool in competitiveness

    Energy Technology Data Exchange (ETDEWEB)

    Quispe, E. [GIEN, Univ. Autonoma de Occidente, Cali (Colombia); Prias, O. [COLCIENCIAS, Bogota D.C. (Colombia); Viego, P. [CEEMA, Univ. de Cienfuegos, Cienfuegos (Cuba)

    2005-07-01

    Electric motors take near 80% of electricity energy used in an industry, then the efficient use of electric motors allows to reduce production costs and increase competitiveness of the industry. By other side technology management is an administration activity in order to increase productivity and competitiveness through the innovation and correct organization of technology, information and cost. Therefore it is important to establish a relation between the efficient use of electric motor technology and the technological management. The experience shows that the technologies of efficient use of electric motor applied to industry allows to obtain a decrease of the energy consume between 10 to 20 percent. However, the electric motor is only a part of the production process and it is not so important its influence with respect to the total cost of production. Starting from the segregation of all the activities of the productive process, it is shown that in order to improve business production and competitiveness, managers needs others additional indicators beside energy costs, indicators related with technological innovation and management. In this paper, the authors are proposing several indicators in order to be use by managers in taking decisions to improve the competitiveness of business in a global economy. (orig.)

  3. Considerations Regarding the Opportunity of Using Psychological Techniques to Stimulate Solutions Characterized by Novelty and Inventive Step in TISR Transformers and Electric Motors with Shorted Moving Coil

    Directory of Open Access Journals (Sweden)

    Georgescu Daniel Ștefan

    2014-09-01

    Full Text Available This paper presents the appreciations and contributions regarding the use of psychological techniques to stimulate technical creativity with special reference to consonant association technique and inversion technique. The study is performed in the field of TISR transformers and electric motors with limited movement, starting from the analogy between a transformer and an electric motor with shorted coil. It approached a particular aspect of inversion technique in relation with the transformation of negative effects and results of laws, phenomena and processes into useful applications. The matter reffered to is related to the question: ,,why disadvantages and no advantages ?". At the end of the paper are presented and discussed some experimental models produced and studied by the authors in the Research Laboratory of Machines, Equipment and Drives at the University of Suceava and are exposed conclusions drawn from the experimental study and directions for future research.

  4. Electric Motor Thermal Management R&D; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Bennion, Kevin

    2015-06-09

    Thermal constraints place significant limitations on how electric motors ultimately perform. Without the ability to remove heat, the motor cannot operate without sacrificing performance, efficiency, and reliability. Finite element analysis and computational fluid dynamics modeling approaches are being increasingly utilized in the design and analysis of electric motors. As the models become more sophisticated, it is important to have detailed and accurate knowledge of both the passive thermal performance and the active cooling performance. In this work, we provide an overview of research characterizing both passive and active thermal elements related to electric motor thermal management. To better characterize the passive thermal performance, work is being performed to measure motor material thermal properties and thermal contact resistances. The active cooling performance of automatic transmission fluid (ATF) jets is also being measured to better understand the heat transfer coefficients of ATF impinging on motor copper windings.

  5. FY2011 Advanced Power Electronics and Electric Motors Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, Susan A. [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2012-01-31

    The Advanced Power Electronics and Electric Motors (APEEM) program within the DOE Vehicle Technologies Program (VTP) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor (EM), thermal management, and traction drive system technologies that will leapfrog current on-the-road technologies. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

  6. Contributions to the Transient Study of an Electric Motor with Shorted Moving Coil

    Directory of Open Access Journals (Sweden)

    Georgescu Daniel

    2014-09-01

    Full Text Available In this article is studied the transient regime of an electric motor with a shorted moving coil, into alternating current supplied. The authors present their contributions related to the conceiving, achieving and testing of experimental stands of an electric motor with a shorted moving coil and to the identification of the mathematical model, indexical function parameters and the coefficients of the mathematical equation of this engine. Finally, the authors' conclusions are presented on the results of experimental studies and moving coil motor behavior in transient regime.

  7. 10 CFR Appendix A to Subpart U of... - Sampling Plan for Enforcement Testing of Electric Motors

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Sampling Plan for Enforcement Testing of Electric Motors A Appendix A to Subpart U of Part 431 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY... mean energy efficiency of the first sample (X 1) is equal to or greater than the lower control limit...

  8. Predictive Model Based Battery Constraints for Electric Motor Control within EV Powertrains

    NARCIS (Netherlands)

    Roşca, B.; Wilkins, S.; Jacob, J.; Hoedemaekers, E.R.G.; Hoek, S.P. van den

    2014-01-01

    This paper presents a method of predicting the maximum power capability of a Li-Ion battery, to be used for electric motor control within automotive powertrains. As maximum power is highly dependent on battery state, the method consists of a pack level state observer coupled with a predictive

  9. 75 FR 10873 - Energy Conservation Program: Energy Conservation Standards for Small Electric Motors

    Science.gov (United States)

    2010-03-09

    ...-Standard Horsepower and Kilowatt Ratings i. Summary 2. Product Classes B. Screening Analysis C. Engineering... Period Analysis 1. Installation Cost 2. Energy Prices 3. Energy Price Trend 4. Maintenance and Repair... program for ``Certain Industrial Equipment,'' which includes small electric motors, the subject of this...

  10. COOPERATIVE MODE OF ELECTRIC MOTOR AND INTERNAL COMBUSTION ENGINE OPERATION IN THE CONVERSION HYBRID CAR

    Directory of Open Access Journals (Sweden)

    V. Dvadnenko

    2016-12-01

    Full Text Available In the given article the authors proposed a method to control the car, which is converted into a hybrid one. The electric motor and combustion engine operate alternately in the car. They proposed a device for implementing this method and a circuit design for the device in question. They also calculated the dynamics of the vehicle under the joint acceleration.

  11. 77 FR 43015 - Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and...

    Science.gov (United States)

    2012-07-23

    ...; ] DEPARTMENT OF ENERGY 10 CFR Part 431 RIN 1904-AC28 Energy Conservation Standards for Commercial and... commercial and industrial electric motors under section 342(b) of the Energy Policy and Conservation Act (EPCA), as amended; the analytical framework, models, and tools that DOE plans to use to evaluate...

  12. Chemical Partitioning and Resultant Effects on Structure and Electrical Properties in Co-Containing Magnetic Amorphous Nanocomposites for Electric Motors

    Science.gov (United States)

    DeGeorge, Vincent G.

    The chemical partitioning of Cobalt-containing soft magnetic amorphous and nanocomposite materials has been studied with particular focus on its consequences on these materials' nanostructure and electrical resistivity. Theory, models, and discussion in this regard are presented on this class of materials generally, and are detailed in particular on alloys of composition, (Fe65Co35)79.5+xB13Si2Nb4-xCu1.5, for X={0-4at%}, and Co-based, Co76+YFe4Mn4-YB14Si2Nb4, for Y={0-4at%}. The context of this work is within the ongoing efforts to integrate soft magnetic metal amorphous and nanocomposite materials into electric motor applications by leveraging material properties with motor topology in order to increase the electrical efficiency and decrease the size, the usage of rare-earth permanent magnets, and the power losses of electric motors. A mass balance model derived from consideration of the partitioning of glass forming elements relates local composition to crystal state in these alloys. The 'polymorphic burst' onset mechanism and a Time-Temperature-Transformation diagram for secondary crystallization are also presented in relation to the partitioning of glass forming elements. Further, the intrinsic electrical resistivity of the material is related to the formation of virtual bound states due to dilute amounts of the glass forming elements. And lastly, a multiphase resistivity model for the effective composite resistivity that accounts for the amorphous, crystalline, and glass former-rich amorphous regions, each with distinct intrinsic resistivity, is also presented. The presented models are validated experimentally on the Co-containing alloys by Atom Probe Tomography performed through collaboration with Pacific Northwestern National Laboratory.

  13. Thermal energy storage for building heating and cooling applications. Quarterly progress report, April--June 1976

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, H.W.; Kedl, R.J.

    1976-11-01

    This is the first in a series of quarterly progress reports covering activities at ORNL to develop thermal energy storage (TES) technology applicable to building heating and cooling. Studies to be carried out will emphasize latent heat storage in that sensible heat storage is held to be an essentially existing technology. Development of a time-dependent analytical model of a TES system charged with a phase-change material was started. A report on TES subsystems for application to solar energy sources is nearing completion. Studies into the physical chemistry of TES materials were initiated. Preliminary data were obtained on the melt-freeze cycle behavior and viscosities of sodium thiosulfate pentahydrate and a mixture of Glauber's salt and Borax; limited melt-freeze data were obtained on two paraffin waxes. A subcontract was signed with Monsanto Research Corporation for studies on form-stable crystalline polymer pellets for TES; subcontracts are being negotiated with four other organizations (Clemson University, Dow Chemical Company, Franklin Institute, and Suntek Research Associates). Review of 10 of 13 unsolicited proposals received was completed by the end of June 1976.

  14. FY2013 Advanced Power Electronics and Electric Motors R&D Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, Susan A. [Dept. of Energy (DOE), Washington DC (United States). Vehicle Technologies Office

    2014-02-01

    The Advanced Power Electronics and Electric Motors (APEEM) technology area within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor, and traction drive system (TDS) technologies that will leapfrog current on-the-road technologies, leading to lower cost and better efficiency in transforming battery energy to useful work. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency through research in more efficient TDSs.

  15. Energy-Efficiency Policy Opportunities for Electric Motor-Driven Systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This publication is the first global analysis of energy consumption and energy efficiency potential of EMDS (electric motor- driven system). The electric motors and systems they drive are the largest single electricity end use, accounting for more than 40% of global electricity consumption. Huge energy efficiency potential was found untapped in EMDS - around 25% of EMDS electricity use could be saved cost-effectively, reducing total global electricity demand by about 10%. However, the energy efficiency of EMDS has been relatively neglected in comparison with other sustainable energy opportunities. It is crucial to scale up the operations and resources committed to realizing the vast savings potential of optimized EMDS. This paper proposes a comprehensive package of policy recommendations to help governments realize the potential for energy savings in EMDS.

  16. Theoretical Vibration Analysis Regarding Excitation due to Elliptical Shaft Journals in Sleeve Bearings of Electrical Motors

    OpenAIRE

    Ulrich Werner

    2012-01-01

    This paper shows a theoretical vibration analysis regarding excitation due to elliptical shaft journals in sleeve bearings of electrical motors, based on a simplified rotordynamic model. It is shown that elliptical shaft journals lead to kinematic constraints regarding the movement of the shaft journals on the oil film of the sleeve bearings and therefore to an excitation of the rotordynamic system. The solution of the linear differential equation system leads to the mathematical description ...

  17. FEATURES OF ELECTRIC MOTOR CHOICE FOR NUCLEAR POWER PLANT TECHNOLOGICAL OBJECTS

    Directory of Open Access Journals (Sweden)

    V.V. Shevchenko

    2013-06-01

    Full Text Available Nuclear power plants remain the basic power generating enterprises for Ukraine. Execution of works on their reliability control and operating conditions optimization is therefore of current importance. Trouble-free nuclear power plant operation is a vital technical, economical, and ecological problem, a solution to which is largely specified by reliable operation of electric equipment, namely, electric motors of nuclear power plant technological process drives.

  18. Fuzzy controllers in the control system of a brushless electric motor using HIL technology

    Directory of Open Access Journals (Sweden)

    Kalach Gennady

    2017-01-01

    Full Text Available This article proposes a method for creation of a control system for a brushless electric motor based on a fuzzy logic apparatus. The use of a fuzzy controller in this case can increase stability and improve the quality of the system under consideration, which was implemented in the Simulink environment using HIL technology. This technology increases the chances of successfully passing the test phase, considering the control system in prototype.

  19. A study on improvement of electric motor thermal performance using CFD

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Pan Seok; Lee, Ho Jun; Jung, Won Bong [Hyosung Co., Ltd., Seoul (Korea, Republic of)

    2003-07-01

    As motor performance enhancement by improving electric design has reached its limit and downsizing issue has risen, the importance of thermal design is increasing. In this study, the flow and temperature distribution were reviewed with the help of CFD analysis and this result was compared with the experimental results. Furthermore, parametric analysis with thermal design structure showed that axial duct width but fan capacity is a critical factor to lower the hot spot temperature in electric motor.

  20. Electric Motor Thermal Management Research: Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Bennion, Kevin S. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-10-19

    new magnet materials developed at Ames. The impact of the improved transverse rupture strength is a mechanically stronger magnet that is easier for manufacturers to implement into motor designs. The thermal conductivity of the new magnet materials was also measured in comparison to two commercially available AlNiCo magnet materials. The impact of the thermal conductivity of the magnet material will need to be analyzed in the context of a motor application.

  1. Characteristics of particulate matter emissions from toy cars with electric motors.

    Science.gov (United States)

    Wang, Xiaofei; Williams, Brent J; Biswas, Pratim

    2015-04-01

    Aerosol emissions from toy cars with electric motors were characterized. Particle emission rates from the toy cars, as high as 7.47×10(7) particles/s, were measured. This emission rate is lower than other indoor sources such as smoking and cooking. The particles emitted from toy cars are generated from spark discharges inside the electric motors that power the toy cars. Size distribution measurements indicated that most particles were below 100 nm in diameter. Copper was the dominant inorganic species in these particles. By deploying aerosol mass spectrometers, high concentrations of particulate organic matter were also detected and characterized in detail. Several organic compounds were identified using a thermal desorption aerosol gas chromatography. The mass size distribution of particulate organic matter was bimodal. The formation mechanism of particulate organic matter from toy cars was elucidated. A possible new source of indoor air pollution, particles from electric motors in toy cars, was identified. This study characterized aerosol emissions from toy cars in detail. Most of these particles have a diameter less than 100 nm. Copper and some organics are the major components of these particles. Conditions that minimize these emissions were determined.

  2. Behavior of high efficiency electric motors; Comportamiento de motores electricos de alta eficiencia

    Energy Technology Data Exchange (ETDEWEB)

    Bonett, Austin H. [IEEE, (United States)

    2001-09-01

    The energy efficiency is one of the main parameters in the design of the industrial motors of general purpose; nevertheless, it is avoided that it is at the cost of the reliability or to the global performance of the motor. Exist user groups of this equipment that consider that, in the search of a greater efficiency, the useful life period is diminished and the characteristics of operation of the motor are affected. During the past last years, the author has studied the aspects of quality and reliability, as well as the operative advantages of the high efficiency motors and written down the increasing interest for these aspects. Also he has detected that a great number of users has realized that, additionally to the obvious energy saving, the efficient motor offers a greater reliability and a longer useful life in most of the industrial applications. The objective of this article is to present the differences in the quality levels, reliability and operation parameters of high efficiency squirrel cage type electrical motors with those of the motors of standard manufacture. [Spanish] La eficiencia energetica es uno de los principales parametros en el diseno de los motores industriales de proposito general; sin embargo, se evita que sea a costa de la confiabilidad o del desempeno global del motor. Existen grupos de usuarios de estos equipos que consideran que, en la busqueda de una mayor eficiencia, se disminuye el periodo de vida util y se afectan las caracteristicas de operacion del motor. Durante los ultimos anos, el autor ha estudiado los aspectos de calidad y confiabilidad, asi como las ventajas operativas de los motores de alta eficiencia y anotado el incremento del interes por estos aspectos. Tambien ha detectado que un gran numero de usuarios se ha dado cuenta que, adicionalmente a los obvios ahorros de energia, el motor eficiente ofrece una mayor confiabilidad y una vida util mas larga en la mayoria de las aplicaciones industriales. El objetivo de este

  3. Quarterly Management Document – FY17, 1st Quarter, Physics-based Creep Simulations of Thick Section Welds in High Temperature and Pressure Applications

    Energy Technology Data Exchange (ETDEWEB)

    Lillo, Thomas Martin [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-01

    During the first quarter of FY17, research has focused on: 1. Generation of synthetic microstructures of welds 2. Aging of gamma prime 3. Short term creep tests 4. Preparation for stress drop tests to determine the threshold stress.

  4. REDUNDANT ELECTRIC MOTOR DRIVE CONTROL UNIT DESIGN USING AUTOMATA-BASED APPROACH

    Directory of Open Access Journals (Sweden)

    Yuri Yu. Yankin

    2014-11-01

    Full Text Available Implementation of redundant unit for motor drive control based on programmable logic devices is discussed. Continuous redundancy method is used. As compared to segregated standby redundancy and whole system standby redundancy, such method provides preservation of all unit functions in case of redundancy and gives the possibility for continuous monitoring of major and redundant elements. Example of that unit is given. Electric motor drive control channel block diagram contains two control units – the major and redundant; it also contains four power supply units. Control units programming was carried out using automata-based approach. Electric motor drive control channel model was developed; it provides complex simulation of control state-machine and power converter. Through visibility and hierarchy of finite state machines debug time was shortened as compared to traditional programming. Control state-machine description using hardware description language is required for its synthesis with FPGA-devices vendor design software. This description was generated automatically by MATLAB software package. To verify results two prototype control units, two prototype power supply units, and device mock-up were developed and manufactured. Units were installed in the device mock-up. Prototype units were created in accordance with requirements claimed to deliverable hardware. Control channel simulation and tests results in the perfect state and during imitation of major element fault are presented. Automata-based approach made it possible to observe and debug control state-machine transitions during simulation of transient processes, occurring at imitation of faults. Results of this work can be used in development of fault tolerant electric motor drive control channels.

  5. FY2010 Annual Progress Report for Advanced Power Electronics and Electric Motors

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, Susan A. [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2011-01-01

    The Advanced Power Electronics and Electric Machines (APEEM) subprogram within the Vehicle Technologies Program provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE) and electric motor technologies that will leapfrog current on-the-road technologies. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

  6. Heat engine and electric motor torque distribution strategy for a hybrid electric vehicle

    Science.gov (United States)

    Boberg, Evan S.; Gebby, Brian P.

    1999-09-28

    A method is provided for controlling a power train system for a hybrid electric vehicle. The method includes a torque distribution strategy for controlling the engine and the electric motor. The engine and motor commands are determined based upon the accelerator position, the battery state of charge and the amount of engine and motor torque available. The amount of torque requested for the engine is restricted by a limited rate of rise in order to reduce the emissions from the engine. The limited engine torque is supplemented by motor torque in order to meet a torque request determined based upon the accelerator position.

  7. Vibration diagnostic system for evaluation of state interconnected electrical motors mechanical parameters

    Science.gov (United States)

    Vasilevskyi, Oleksandr M.; Kulakov, Pavlo I.; Dudatiev, Igor A.; Didych, Volodymyr M.; Kotyra, Andrzej; Suleimenov, Batyrbek; Assembay, Azat; Kozbekova, Ainur

    2017-08-01

    The paper presents the structural diagram and mathematical model of a vibration diagnostic system to measure angular velocities of two interconnected electric motors. The system is based on vibration signals and the control signals of the motor mechanical parameters. The measurement procedure of the rotor rotational speed is based on vibration signals during synchronization. The procedure presented allows simultaneous measurement and synchronization frequencies of rotation to diagnose of the motors' mechanical parts. The calculated reduced error of synchronizing frequencies of rotation of the rotors, which is 0.45% of the measurement range of frequencies of rotation from 0 to 80Hz.

  8. Report on the feasibility study for improving electric motor service centers in Ghana

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, J.S.; Jallouk, P.A.; Staunton, R.H.

    1999-12-10

    On March 3 and 4, 1998, a visit was made to Oak Ridge National Laboratory (ORNL) by two officials from Ghana: Mr. I.K. Mintah, Acting Executive Director, Technical Wing, Ministry of Mines and Energy (MOME) and Dr. A.K. Ofosu-Ahenkorah, Coordinator, Energy Efficiency and Conservation Program, MOME. As a result of this visit, Dr. John S. Hsu of ORNL was invited by MOME to visit the Republic of Ghana in order to study the feasibility of improving electric motor service centers in Ghana.

  9. Electric motor-transformer aggregate in hermetic objects of transport vehicles

    Science.gov (United States)

    Zabora, Igor

    2017-10-01

    The construction and features of operation for new electrical unit – electric motor-transformer aggregate (DTA) are considered. Induction motors are intended for operation in hermetic plants with extreme conditions surrounding gas, steam-to-gas and liquid environment at a high temperature (to several hundred of degrees). Main objective of spent researches is the substantiation of possibility reliable and effective electric power transform with electric machine means directly in hermetic objects with extreme conditions environment by means of new DTA. The principle and job analysis of new disk induction motors of block-module type are observed.

  10. Numerical investigation of refrigeration machine compressor operation considering single-phase electric motor dynamic characteristics

    Science.gov (United States)

    Baidak, Y.; Smyk, V.

    2017-08-01

    Using as the base the differential equations system which was presented in relative units for generalized electric motor of hermetic refrigeration compressor, mathematical model of the software for dynamic performance calculation of refrigeration machine compressors drive low-power asynchronous motors was developed. Performed on its ground calculations of the basic model of two-phase electric motor drive of hermetic compressor and the proposed newly developed model of the motor with single-phase stator winding, which is an alternative to the industrial motor winding, have confirmed the benefits of the motor with innovative stator winding over the base engine. Given calculations of the dynamic characteristics of compressor drive motor have permitted to determine the value of electromagnetic torque swinging for coordinating compressor and motor mechanical characteristics, and for taking them into consideration in choosing compressor elements construction materials. Developed and used in the process of investigation of refrigeration compressor drive asynchronous single-phase motor mathematical and software can be considered as an element of computer-aided design system for design of the aggregate of refrigeration compression unit refrigerating machine.

  11. Development of an Electric Motor Powered Low Cost Coconut Deshelling Machine

    Science.gov (United States)

    Mondal, Imdadul Hoque; Prasanna Kumar, G. V.

    2016-06-01

    An electric motor powered coconut deshelling machine was developed in line with the commercially available unit, but with slight modifications. The machine worked on the principle that the coconut shell can be caused to fail in shear and compressive forces. It consisted of a toothed wheel, a deshelling rod, an electric motor, and a compound chain drive. A bevelled 16 teeth sprocket with 18 mm pitch was used as the toothed wheel. Mild steel round bar of 18 mm diameter was used as the deshelling rod. The sharp edge tip of the deshelling rod was inserted below the shell to apply shear force on the shell, and the fruit was tilted toward the rotary toothed wheel to apply the compressive force on the shell. The speed of rotation of the toothed wheel was set at 34 ± 2 rpm. The output capacity of the machine was found to be 24 coconuts/h with 95 % of the total time effectively used for deshelling. The labour requirement was found to be 43 man-h/1000 nuts. About 13 % of the kernels got scraped and about 7 % got sliced during the operation. The developed coconut deshelling machine was recommended for the minimum annual use of 200 h or deshelling of 4700 coconuts per year. The cost of operation for 200 h of annual use was found to be about ` 47/h. The developed machine was found to be simple, easy to operate, energy efficient, safe and reduce drudgery involved in deshelling by conventional methods.

  12. Investigation of Heat Loss from the Finned Housing of the Electric Motor of a Vacuum Pump

    Directory of Open Access Journals (Sweden)

    Jacek Wernik

    2017-11-01

    Full Text Available Investigation of the heat transfer by conduction and convection through a finned housing of an electric motor rated 373 W operated in the drive unit of a vacuum pump was carried out. As the speed is changed, so is the velocity of air flow, and consequently, the coefficient of heat transfer across the housing surface is changed too. To predict the values of the average heat transfer coefficient and to determine the heat flow that was dissipated at variable motor speed is a complex task, for which no reliable tools can be found in the literature. Using finite element approximation, the heat transfer was numerically simulated and the temperature distribution on the housing surface was determined. In order to validate the simulation model, an experimental set-up was assembled, including the vacuum pump complete with its driving unit, that is, electrical motor and frequency converter, and FLIR SC7600 thermovision camera. Using the validated simulation model, the heat flux transferred through the housing to the environment and the share of heat dissipation in the power consumed by the vacuum pump drive was determined. The combination of numerical simulation and thermographic measurements is an effective tool.

  13. The application of MATLAB-based analytic hierarchy process in Hainan residential quarter function factor evaluation

    Science.gov (United States)

    Qiu, Dongdong; Liu, Peiqi

    2017-04-01

    Since being designated as an international tourist island, Hainan has become an overwhelmingly favored choice of real estate investment. This paper first constructed Hainan residential quarter function factor index system, then evaluated relevant factors, and finally solved the problem of factor importance ranking. In this specific case, the software MATLAB was used to facilitate AHP calculation. The evaluation results have guiding and referential value to both real estate developers and residential consumers.

  14. INTENSITY SETTER FOR A DEVICE OF SMOOTH START OF SUBMERSIBLE PUMP ELECTRIC MOTOR

    Directory of Open Access Journals (Sweden)

    V.I. Lobov

    2016-06-01

    Full Text Available Purpose. Development of an intensity setter, which in a rational law changes the opening thyristor the voltage regulator and effectively to changing power supply voltage stator windings of the electric pump deepening, ensuring a smooth start in a wide range. Methodology. Electric submersible pump belongs to the small inertia electric, since it is not significant total moment of inertia, not exceeding two moments of inertia of the motor and static moment on the shaft does not exceed forty percent of the nominal torque. For technical requirements that electric acceleration time should have no less than twenty seconds or more. Office starting modes of electric submersible pumps economically justified using thyristor voltage regulator by forming the dial changes the intensity of the necessary legislation in time voltage feeding the stator windings. This ensures a smooth start right rotor of the electric submersible pump. Results. A block diagram of the intensity setter that is: with control unit, two units that form the exponential voltage supply emitter follower and regulatory elements. The mathematical expressions for voltage at the stator windings of the motor, changing exponentially, opening the angle of thyristor power unit thyristor the voltage regulator, which is determined through the initial angle of opening. Provided formula for pick-up voltage and minimum voltage, time constants, which are determined from the basic equations of motion and mechanical characteristics of the electric motor. Analytical investigated by the voltage dependence violation by changing the time constant flowing and growing exhibitor supply voltage stator electric circuit deepening pump. Originality. Proposed in the initial time on the stator windings of the electric pick-up voltage is applied. Under the influence of this voltage, motor rotor begins to accelerate. At the same time, pick-up voltage decreases the minimum startup voltage varies exponentially in which

  15. Comparison the programs of energy efficiency for industrial electric motors; Comparacao de programas de eficiencia energetica para motores eletricos industriais

    Energy Technology Data Exchange (ETDEWEB)

    Mariotoni, Carlos Alberto; Naturesa, Jim Silva; Santos Junior, Joubert Rodrigues dos; Demanboro, Antonio Carlos [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Faculdade de Engenharia Civil, Arquitetura e Urbanismo. Nucleo Interdisciplinar de Planejamento Energetico (NIPE)]. E-mail: cam@fec.unicamp.br; jimnaturesa@yahoo.com; joubert@fec.unicamp.br; anto1810@fec.unicamp.br

    2006-07-01

    This paper aims to present a comparison among the existing programs of energy efficiency for industrial electric motors in Brazil, in the United States of America and in the European Community. The analysis is restricted to the action of each program, considering that the mentioned countries present distinct economical, political and social characteristics. Therefore, it is intended to discuss the main barriers existing in the Brazilian industrial context which cause difficulties to develop a program of electric motors efficiency and to indicate some ways to overcome those barriers. (author)

  16. Determination of the needed power of an electric motor on the basis of acceleration time of the electric car

    Science.gov (United States)

    Sapundzhiev, M.; Evtimov, I.; Ivanov, R.

    2017-10-01

    The paper presents an upgraded methodology for determination of the electric motor power considering the time for acceleration. The influence of the speed factor of electric motor on the value of needed power at same acceleration time is studied. Some calculations on the basis of real vehicle were made. The numeric and graphical results are given. They show a decrease of needed power with the increase of the speed factor of motor, because the high speed factor allows the use of a larger range of the characteristic with the maximum power of the motor. An experimental verification of methodology was done.

  17. Theoretical Vibration Analysis Regarding Excitation due to Elliptical Shaft Journals in Sleeve Bearings of Electrical Motors

    Directory of Open Access Journals (Sweden)

    Ulrich Werner

    2012-01-01

    Full Text Available This paper shows a theoretical vibration analysis regarding excitation due to elliptical shaft journals in sleeve bearings of electrical motors, based on a simplified rotordynamic model. It is shown that elliptical shaft journals lead to kinematic constraints regarding the movement of the shaft journals on the oil film of the sleeve bearings and therefore to an excitation of the rotordynamic system. The solution of the linear differential equation system leads to the mathematical description of the movement of the rotor mass, the shaft journals, and the sleeve bearing housings. Additionally the relative movements between the shaft journals and the bearing housings are deduced, as well as the bearing housing vibration velocities. The presented simplified rotordynamic model can also be applied to rotating machines, other than electrical machines. In this case, only the electromagnetic spring value cm has to be put to zero.

  18. Industry agreement on efficient electrical motors; Industrievereinbarung im Effizienzbereich Motoren (eff1, eff2, eff3)

    Energy Technology Data Exchange (ETDEWEB)

    Schnyder, G. [Schnyder Ingenieure AG, Huenenberg (Switzerland)

    2004-07-01

    This comprehensive final report presents the results of a project carried out on behalf of the Swiss Federal Office of Energy (SFOE) and the Swiss Automation Pool (SAP) concerning the efficiency of electrical drives. The main goal of the project was to conclude a target agreement between the federal government and the Swiss electric motors/drives industry. This involves the promotion of the highest, 'eff1' energy-efficiency category of the three categories defined by the European Committee of Manufacturers of Electrical Machines and Power Electronics (CEMP). The report presents the findings of the project and recommends the banning of the use of motors in the lowest, 'eff3' category. Comparisons are made between the CEMP standards and further standards and promotion programmes in the USA and in Great Britain. Associated measures to be taken to aid the promotion of the drive standard are discussed.

  19. Safety Assessment for Electrical Motor Drive System Based on SOM Neural Network

    Directory of Open Access Journals (Sweden)

    Linghui Meng

    2016-01-01

    Full Text Available With the development of the urban rail train, safety and reliability have become more and more important. In this paper, the fault degree and health degree of the system are put forward based on the analysis of electric motor drive system’s control principle. With the self-organizing neural network’s advantage of competitive learning and unsupervised clustering, the system’s health clustering and safety identification are worked out. With the switch devices’ faults data obtained from the dSPACE simulation platform, the health assessment algorithm is verified. And the results show that the algorithm can achieve the system’s fault diagnosis and health assessment, which has a point in the health assessment and maintenance for the train.

  20. Transient state study of electric motor heating and phase change solid-liquid cooling

    Energy Technology Data Exchange (ETDEWEB)

    Bellettre, J.; Sartre, V.; Lallemand, A. [Centre National de la Recherche Scientifique (CNRS), Centre de Thermique de Lyon, Villeurbanne, 69 (France); Biais, F. [AUXILEC, Chatou, 78 (France)

    1997-01-01

    This study reports on modelling of an autosynchronous electric motor stator, operating at transient state. The developed model, of the modal type, includes around 20 nodes. The simulations showed that hot spots are localized on the winding heads and led to the choice of a solid-liquid phase change cooling system. The comparison between simulation and experiment permitted the identification of unknown parameters. The model gives a good accuracy during steady-state and in the rising temperature phase. The modelling of the phase change cooling is realized by the addition of two nodes. The sensitivity analysis to PCM properties shows that the hot spot temperature decreases with increasing conductivities, inertia and latent heat of melting of the PCM and with decreasing melting temperature. Gallium (metal melting at 30{sup o}C) is the best PCM for the cooling of hot spots and P116 paraffin is the best non-metallic PCM. (author)

  1. Wearable Quarter-Wave Folded Microstrip Antenna for Passive UHF RFID Applications

    Directory of Open Access Journals (Sweden)

    Thomas Kaufmann

    2013-01-01

    Full Text Available A wearable low-profile inset-fed quarter-wave folded microstrip patch antenna for noninvasive activity monitoring of elderly is presented. The proposed antenna is embedded with a sensor-enabled passive radio-frequency identification (RFID tag operating in the ultra-high frequency (UHF industrial-scientific-medical (ISM band around 900 MHz. The device exhibits a low and narrow profile based on a planar folded quarter-wave length patch structure and is integrated on a flexible substrate to maximise comfort to the wearer. An extended ground plane made from silver fabric successfully minimises the impact of the human body on the antenna performance. Measurements on a prototype demonstrate a reflection coefficient (S11 of −30 dB at resonance and a −10 dB bandwidth from 920 MHz to 926 MHz. Simulation results predict a maximum gain of 2.8 dBi. This is confirmed by tag measurements where a 4-meter read range is achieved using a transmit power of 30 dBm, for the case where the passive wearable tag antenna is mounted on a body in a practical setting. This represents an almost 40% increase in read range over an existing dipole antenna placed over a 10 mm isolator layer on a human subject.

  2. Control allocation for for regenerative braking of electric vehicles with an electric motor at the front axle using the state-dependent Riccati equation control technique

    NARCIS (Netherlands)

    Kanarachos, S.A.; Alirezaei, M.; Jansen, S.T.H.; Maurice, J.P.

    2014-01-01

    In this paper the systematic development of an integrated braking controller for a vehicle driven by an electric motor on the front axle is presented. The objective is to engage the electric motor only during braking, up to the point at which the vehicle reaches its manoeuvrability and stability

  3. Transcranial electrical motor-evoked potential monitoring during surgery for spinal deformity - A study of 145 patients

    NARCIS (Netherlands)

    Langeloo, DD; Lelivelt, A; Journee, HL; Slappendel, R; de Kleuver, M

    2003-01-01

    Study Design. A descriptive historic cohort study was conducted. Objectives. To determine intraoperative response amplitude criteria for transcranial electrical motor-evoked potential monitoring that warn of neurologic damage, and to determine the additional value of monitoring six instead of two

  4. Efficient electric motor systems for industry. Report on roundtable discussions of market problems and ways to overcome them

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    Improving the efficiency of electric motor systems is one of the best energy-saving opportunities for the United States. The Department of Energy (DOE) Office of Industrial Technologies estimates that by the year 2010 in the industrial sector, the opportunities for savings from improved efficiency in electric motor systems could be roughly as follows: 240 billion kilowatthours per year. $13 billion per year from US industry`s energy bill. Up to 50,000 megawatts in new powerplant capacity avoided. Up to 44 million metric tons of carbon-equivalent emissions mitigated per year, corresponding to 3 percent of present US emissions. Recognizing the benefits of this significant opportunity for energy savings, DOE has targeted improvements in the efficiency of electric motor systems as a key initiative in the effort to promote flexibility and efficiency in the way electricity is produced and used. Efficient electric motor systems will help the United States reach its national goals for energy savings and greenhouse gas emission reductions.

  5. ProMot: a decision support tool for electric motor users; ProMot: ein Werkzeug zur Entscheidungsfindung fuer Motorenbetreiber

    Energy Technology Data Exchange (ETDEWEB)

    Tanner, T.

    2006-07-01

    Being supported by an international collaboration the project ProMot has developed and disseminated in the European Union a decision support tool for electric motor users helping them to choose energy efficient motor systems. During the first phase all necessary components to build the decision support tool have been selected, developed or improved and adapted. At the beginning it was assumed that the contribution of the author's company, Semafor would be the integration of the company's OPAL software components developed for pumps and variable speed drives (VSD) into the EuroDEEM package. In view of the deficiencies of EuroDEEM it was soon agreed to abandon this approach. Instead, the package IMSSA (International Motor Selection and Saving Analysis), developed at the Washington State University on the basis of MotorMaster was selected. IMSSA - which has been renamed to EuroDEEM International - and the pump and VSD module can now be used as standalone applications. The second phase integrated all collected and developed material into a comprehensive and user-friendly web site that was then demonstrated to key actors in the participating countries. Several requirements had to be considered. The platform had to allow the publication of the web pages in several languages and to enable the team members to place and modify their content without disturbing ongoing operation. It was therefore decided to evaluate a suitable Web Content Management System (CMS) which lead to Plone, a powerful and adaptable open-source system already in use at many web sites. The pages have then been created and published with this system. With some support from Semafor, German and French translations were created. Also a hardcopy brochure that gives an overview of the web site has been produced and distributed in the participating countries. (author)

  6. Fuel-Cell-Powered Electric Motor Drive Analyzed for a Large Airplane

    Science.gov (United States)

    Brown, Gerald V.; Choi, Benjamin B.

    2005-01-01

    Because of its high efficiency, fuel cell technology may be used to launch a new generation of more-electric aeropropulsion and power systems for future aircraft. Electric-motor-driven airplanes using fuel-cell powerplants would be beneficial to the environment because of fuel savings, low noise, and zero carbon-dioxide emissions. In spite of the fuel cell s efficiency benefit, to produce the same shaft drive power, a fuel cell- powered electric-drive system must be definitely heavier than a turbine-drive system. However, the fuel-cell system s overall efficiency from fuel-to-shaft power is higher than for a turbine-drive system. This means that the fuel consumption rate could be lower than for a conventional system. For heavier, fuel-laden planes for longer flights, we might achieve substantial fuel savings. In the airplane industry, in fact, an efficiency gain of even a few percentage points can make a major economic difference in operating costs.

  7. Three-Dimensional Thermo Fluid Analysis of Large Scale Electric Motor

    Directory of Open Access Journals (Sweden)

    Debasish Biswas

    2000-01-01

    Full Text Available In the present work, the flow and temperature fields in large scale rotating electric motor are studied by solving the Navier–Stokes equations along with the temperature equation on the basis of finite difference method. All the equations are written in terms of relative velocity with respect to the rotating frame of reference. Generalized coordinate system is used so that sufficient grid resolution could be achieved in the body surface boundary layer region. Differential terms with respect to time are approximated by forward differences, diffusion terms are approximated by the implicit Euler form, convection terms in the Navier–Stokes equations are approximated by the third order upwind difference scheme. The results of calculation led to a good understanding of the flow behavior, namely, the rotating cavity flow in between the supporting bar of the motor, the flow stagnation and region of temperature rise due to flow stagnation, etc. Also the measured average temperature of the motor coil wall is predicted quite satisfactorily.

  8. Procedure for the energy evaluation of electric motors; Procedimiento para la evaluacion energetica de motores electricos

    Energy Technology Data Exchange (ETDEWEB)

    Feliz Quiroz, Marco Antonio [Universidad Autonoma Metropolitana (Mexico)

    2002-06-01

    The present article is not a complete treaty about motors, here it is simply tried to show a practical procedure to evaluate electric motors, in order to determine the economics of their possible replacement by others of high efficiency. With the former in mind, the included database is sustained in the information of a representative number of motors brands commercialized in Mexico, since to include all the brands sold in our country would not be practical and it would be outside the scope of this publication. [Spanish] El presente articulo no es todo un tratado acerca de motores, sencillamente aqui se pretende mostrar un procedimiento practico para evaluar los motores electricos, a fin de determinar la rentabilidad de su eventual reemplazo por otros de alta eficiencia. Por lo anterior, la base de datos incluida se sustente en la informacion de un numero representativo de marcas de motores comercializados en Mexico, ya que abarcar todas las marcas vendidas en nuestro pais no seria practico y quedaria fuera del alcance de esta publicacion.

  9. Simulated annealing algorithm for multi-objective optimization : application to electric motor design

    Energy Technology Data Exchange (ETDEWEB)

    Idoumghar, L. [Haute Alcace Univ., Mulhouse (France); Fodorean, D.; Mirraoui, A. [Univ. of Technology of Belfort-Montbeliard, Belfort (France). Dept. of Electrical Engineering and Control Systems

    2010-03-09

    Metaheuristics algorithms can solve complex optimization problems. A unique simulated annealing (SA) algorithm for multi-objective optimization was presented in this paper. The proposed SA algorithm was validated on five standard benchmark mathematical functions and improved the design of an inset permanent magnet motor with concentrated flux (IPMM-CF). The paper provided a description of the SA algorithm and discussed the results. The five benchmarks that were studied included Rastrigin's function; Rosenbrock's function; Michalewicz's function; Schwefel's function; and Noisy's function. The findings were also compared with results obtained by using the Ant Colony paradigm as well as with a particle swarm algorithm. Conclusions and further research options were also offered. It was concluded that the proposed approach has better performance in terms of accuracy, convergence rate, stability and robustness. 15 refs., 4 tabs., 9 figs.

  10. Sensorless Control of Electric Motors with Kalman Filters: Applications to Robotic and Industrial Systems

    Directory of Open Access Journals (Sweden)

    Gerasimos G. Rigatos

    2011-12-01

    Full Text Available The paper studies sensorless control for DC and induction motors, using Kalman Filtering techniques. First the case of a DC motor is considered and Kalman Filter-based control is implemented. Next the nonlinear model of a field-oriented induction motor is examined and the motor

  11. Sensorless Control of Electric Motors with Kalman Filters: Applications to Robotic and Industrial Systems

    OpenAIRE

    Gerasimos G. Rigatos; Pierluigi Siano

    2011-01-01

    The paper studies sensorless control for DC and induction motors, using Kalman Filtering techniques. First the case of a DC motor is considered and Kalman Filter-based control is implemented. Next the nonlinear model of a field-oriented induction motor is examined and the motor's angular velocity is estimated by an Extended Kalman Filter which processes measurements of the rotor's angle. Sensorless control of the induction motor is again implemented through feedback of the estimated state vec...

  12. Sensorless Control of Electric Motors with Kalman Filters: Applications to Robotic and Industrial Systems

    Directory of Open Access Journals (Sweden)

    Gerasimos G. Rigatos

    2011-12-01

    Full Text Available The paper studies sensorless control for DC and induction motors, using Kalman Filtering techniques. First the case of a DC motor is considered and Kalman Filter-based control is implemented. Next the nonlinear model of a field-oriented induction motor is examined and the motor's angular velocity is estimated by an Extended Kalman Filter which processes measurements of the rotor's angle. Sensorless control of the induction motor is again implemented through feedback of the estimated state vector. Additionally, a state estimation-based control loop is implemented using the Unscented Kalman Filter. Moreover, state estimation-based control is developed for the induction motor model using a nonlinear flatness-based controller and the state estimation that is provided by the Extended Kalman Filter. Unlike field oriented control, in the latter approach there is no assumption about decoupling between the rotor speed dynamics and the magnetic flux dynamics. The efficiency of the Kalman Filter-based control schemes, for both the DC and induction motor models, is evaluated through simulation experiments.

  13. Lightweight High Efficiency Electric Motors and Actuators for Low Temperature Mobility and Robotics Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — QM Power will build and empirically test Space and Cryogenic qualified preproduction Parallel Magnetic Circuit [PMC] 1-5 HP motor/actuators with electronic...

  14. Lightweight High Efficiency Electric Motors and Actuators for Low Temperature Mobility and Robotics Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Space Exploration Vehicles and Lunar Surface Systems require electromechanical systems that are varied and include long life capability, high reliability, high...

  15. Practical superconductor development for electrical power applications quarterly report for the period ending December 31, 1997.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-12

    This is a multiyear experimental research program focused on improving relevant material properties of high-T{sub c} superconductors and on development of fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of this program. Recent work on microstructural development and current distribution in Bi-2223 powder-in-tube tapes and a novel application for high-temperature superconductors are discussed.

  16. Quarterly Data for Spoken Language Preferences of Supplemental Security Income Blind and Disabled Applicants (2014-2015)

    Data.gov (United States)

    Social Security Administration — This data set provides quarterly volumes for language preferences at the national level of individuals filing claims for SSI Blind and Disabled benefits for fiscal...

  17. Social Security Administration - Quarterly Data for Spoken Language Preferences of Supplemental Security Income Blind and Disabled Applicants (2016-onwards)

    Data.gov (United States)

    Social Security Administration — This data set provides quarterly volumes for language preferences at the national level of individuals filing claims for SSI Blind and Disabled benefits from fiscal...

  18. Social Security Administration - Quarterly Data for Spoken Language Preferences of Supplemental Security Income Aged Applicants (2016-onwards)

    Data.gov (United States)

    Social Security Administration — This data set provides quarterly volumes for language preferences at the national level of individuals filing claims for SSI Aged benefits from fiscal year 2016 -...

  19. Measurement of Heat Losses on The Milking Machine Electric Motor at Various Regulations of Vacuum Using Methods of Thermal Imagery

    Directory of Open Access Journals (Sweden)

    Jan Kudělka

    2014-01-01

    Full Text Available To ensure the desirable vacuum in the milking machines, use is currently made predominantly of rotary vacuum pumps. These vacuum pumps are driven by a squirrel-cage induction motor. Until recently, the vacuum in the system to achieve the required value was controlled by a main control valve sucking in ambient air into the system. During the milking process itself and during other activities (flushing, sanitation, this control method consumed a large amount of electricity. The technical solution to electricity demand reduction was introduced with the emergence and development of frequency converters. The frequency converters control the operation of the asynchronous electric motor so that the actual delivery of the vacuum pumps equals the volume of air sucked into the vacuum pipe. The motor supply by the frequency converter brings about a host of adverse phenomena. This paper is dedicated to motor heating and heat losses on the surface of the electric motor at different regulations of vacuum in milking machines. The objective of the paper is to determine the immediate specific heat flows along the surface of the electric motor of the milking machine during milking using a control valve regulation and a control using the frequency converter, and compare the resulting value. The specific heat flows were determined by means of a non-traditional method of temperature field measurement using a system of thermal imagery. The calculated and measured data obtained from both these systems were statistically evaluated and compared. Use was made of a milking machine located in the cooperative Hospodářské obchodní družstvo (HOD Jabloňov.

  20. Vehicle Dynamics Control of In-wheel Electric Motor Drive Vehicles Based on Averaging of Tire Force Usage

    Science.gov (United States)

    Masaki, Nobuo; Iwano, Haruo; Kamada, Takayoshi; Nagai, Masao

    For in-wheel electric motor drive vehicles, a new vehicle dynamics control which is based on the tire force usage rate is proposed. The new controller adopts non-linear optimal control could manage the interference between direct yaw-moment control and the tire force usage rate. The new control is considered total longitudinal and transverse tire force. Therefore the controller can prevent tire force saturation near tire force limit during cornering. Simulations and test runs by the custom made four wheel drive in-wheel motor electric vehicle show that higher driving stability performance compared to the performance of the same vehicle without control.

  1. About the Territorial Potential of the Construction of Battery-Charging Stations for Autonomous Electric Motor Vehicles in the Regions

    Directory of Open Access Journals (Sweden)

    Shilova Lyubov

    2016-01-01

    Full Text Available The article describes the main current trends in the development of electric motor vehicles with "zero emission" as well as the battery-charging stations concerned. The study is based on a preliminary comparative analysis of the RF regions with respect to five indices (average per capita income, number of private cars in the region, air pollution level, provision of the region with power supply and the potential use of local renewable energy resources, and it gives some recommendations on the prospects of possible construction of battery-charging stations in the regions.

  2. FY2014 Oak Ridge National Laboratory Annual Progress Report for the Power Electronics and Electric Motors Program

    Energy Technology Data Exchange (ETDEWEB)

    Ozpineci, Burak [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2014-11-01

    The US Department of Energy (DOE) announced in May 2011 a new cooperative research effort comprising DOE, the US Council for Automotive Research (composed of automakers Ford Motor Company, General Motors Company, and Chrysler Group), Tesla Motors, and representatives of the electric utility and petroleum industries. Known as U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy sustainability), it represents DOE’s commitment to developing public–private partnerships to fund high-risk–high-reward research into advanced automotive technologies. The new partnership replaces and builds upon the partnership known as FreedomCAR (derived from “Freedom” and “Cooperative Automotive Research”) that ran from 2002 through 2010 and the Partnership for a New Generation of Vehicles initiative that ran from 1993 through 2001. Oak Ridge National Laboratory’s (ORNL’s) Advanced Power Electronics and Electric Motors (APEEM) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor, and traction drive system (TDS) technologies that will leapfrog current on-the-road technologies, leading to lower cost and better efficiency in transforming battery energy to useful work. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency through research in more efficient TDSs.

  3. 14 CFR 93.325 - Quarterly reporting.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Quarterly reporting. 93.325 Section 93.325... Canyon National Park, AZ § 93.325 Quarterly reporting. (a) Each certificate holder must submit in writing... segment flown; (4) Departure date and actual Universal Coordinated Time, as applicable for each segment...

  4. Adaptive regenerative braking for electric vehicles with an electric motor at the front axle using the state dependent Riccati equation control technique

    NARCIS (Netherlands)

    Jansen, S.; Alirezaei, M.; Kanarachos, S.

    2014-01-01

    In this paper a novel adaptive regenerative braking control concept for electric vehicles with an electric motor at the front axle is presented. It is well known that the "phased" type regenerative braking systems of category B maximize the amount of regenerative energy during braking. However,

  5. Software for optimal selection of places for installation of balancing devices in 0,4 kV electric power systems loaded with electric motors

    Directory of Open Access Journals (Sweden)

    Romanova Victoria

    2017-01-01

    Full Text Available This publication considers the issues of development of the software program for designing of 0,4 kV power supply systems with motor-actuated load under voltage unsymmetry conditions (using the example of the Trans-Baikal Territory. Voltage unsymmetry is practically constant phenomenon in the electric power networks of different voltage types. Voltage unsymmetry effects significantly the electric power consumers, including the supply mains itself. It has especially negative impact on the electrical equipment operation process and its lifetime. The urgency of the problem is confirmed by multiple research on the same topic and by significant number of damages suffered by the electric power consumers staying in service (especially in the Trans-Baikal Territory and in the Far-East regions. Voltage unsymmetry causes economic loss and reduction of the electromagnetic interference value by the voltage unsymmetry coefficient in negative-phase sequence (K2U gives inevitable economic effect accordingly. However, the payback period for the activities aimed at reduction of electromagnetic interference, will vary from some months to several years. The more accurate value of the payback period may be obtained using the developed software program. The developed software design program is implemented by means of the programming language C# in Microsoft Visual Studio environment, using the built-in cross-platform database SQLite. The software program shall allow making quick and accurate calculation of the power losses, to determine the economic feasibility of provision special measures for removal of the voltage unsymmetry, for determination of optimal application and location of the balancing devices. The software implementation in power systems loaded with electric motors will improve reliability and efficiency of asynchronous motors. The software is of interest for developers of projects on power supply systems for regions with non-linear loads.

  6. Relationship of Cure Temperature to Mechanical, Physical, and Dielectric Performance of PDMS Glass Composite for Electric Motor Insulation

    Science.gov (United States)

    Miller, Sandi G.; Becker, Kathleen; Williams, Tiffany S.; Scheiman, Daniel A.; McCorkle, Linda S.; Heimann, Paula J.; Ring, Andrew; Woodworth, Andrew

    2017-01-01

    Achieving NASAs aggressive fuel burn and emission reduction for N-plus-3 aircraft will require hybrid electric propulsion system in which electric motors driven by either power generated from turbine or energy storage system will power the fan for propulsion. Motors designed for hybrid electric aircraft are expected to operate at medium to high voltages over long durations in a high altitude service environment. Such conditions have driven research toward the development of wire insulation with improved mechanical strength, thermal stability and increased breakdown voltage. The silicone class of materials has been considered for electric wire insulation due to its inherent thermal stability, dielectric strength and mechanical integrity. This paper evaluates the dependence of these properties on the cure conditions of a polydimethyl-siloxane (PDMS) elastomer; where both cure temperature and base-to-catalyst ratio were varied. The PDMS elastomer was evaluated as a bulk material and an impregnation matrix within a lightweight glass veil support. The E-glass support was selected for mechanical stiffness and dielectric strength. This work has shown a correlation between cure conditions and material physical properties. Tensile strength increased with cure temperature whereas breakdown voltage tended to be independent of process variations. The results will be used to direct material formulation based on specific insulation requirements.

  7. Ultra-Efficient and Power Dense Electric Motors for U. S. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Melfi, Michael J.; Schiferl, Richard F.; Umans, Stephen D.

    2013-03-12

    The primary purpose of this project was to combine the ease-of-installation and ease-of-use attributes of industrial induction motors with the low-loss and small size and weight advantages of PM motors to create an ultra-efficient, high power density industrial motor that can be started across-the-line or operated from a standard, Volts/Hertz drive without the need for a rotor position feedback device. PM motor products that are currently available are largely variable speed motors that require a special adjustable speed drive with rotor position feedback. The reduced size and weight helps to offset the magnet cost in order make these motors commercially viable. The scope of this project covers horsepower ratings from 20 ? 500. Prototypes were built and tested at ratings ranging from 30 to 250 HP. Since fans, pumps and compressors make up a large portion of industrial motor applications, the motor characteristics are tailored to those applications. Also, since there is extensive use of adjustable frequency inverters in these applications, there is the opportunity to design for an optimal pole number and operate at other than 60 Hz frequency when inverters are utilized. Designs with four and eight pole configurations were prototyped as part of this work. Four pole motors are the most commonly used configuration in induction motors today. The results of the prototype design, fabrication, and testing were quite successful. The 50 HP rating met all of the design goals including efficiency and power density. Tested values of motor losses at 50 HP were 30% lower than energy efficient induction motors and the motor weight is 35% lower than the energy efficient induction motor of the same rating. Further, when tested at the 30 HP rating that is normally built in this 286T frame size, the efficiency far exceeds the project design goals with 30 HP efficiency levels indicating a 55% reduction in loss compared to energy efficient motors with a motor weight that is a few

  8. Ozone levels in the Empty Quarter of Saudi Arabia--application of adaptive neuro-fuzzy model.

    Science.gov (United States)

    Rahman, Syed Masiur; Khondaker, A N; Khan, Rouf Ahmad

    2013-05-01

    In arid regions, primary pollutants may contribute to the increase of ozone levels and cause negative effects on biotic health. This study investigates the use of adaptive neuro-fuzzy inference system (ANFIS) for ozone prediction. The initial fuzzy inference system is developed by using fuzzy C-means (FCM) and subtractive clustering (SC) algorithms, which determines the important rules, increases generalization capability of the fuzzy inference system, reduces computational needs, and ensures speedy model development. The study area is located in the Empty Quarter of Saudi Arabia, which is considered as a source of huge potential for oil and gas field development. The developed clustering algorithm-based ANFIS model used meteorological data and derived meteorological data, along with NO and NO₂ concentrations and their transformations, as inputs. The root mean square error and Willmott's index of agreement of the FCM- and SC-based ANFIS models are 3.5 ppbv and 0.99, and 8.9 ppbv and 0.95, respectively. Based on the analysis of the performance measures and regression error characteristic curves, it is concluded that the FCM-based ANFIS model outperforms the SC-based ANFIS model.

  9. Smart and efficient electric drives for mecathronic applications

    OpenAIRE

    Tinazzi, F.

    2016-01-01

    The call for the reduction of energy consumption has manifolds reflections on the mechatronics applications. Electric motors represent one of the biggest electric energy consumers in the world, due to their wide utilisation both in industrial and domestic applications. There is, in turn, a need of more efficient drives that implement energy efficient control techniques for all kind of electric motors. The mechanical sensor for the rotor position represents both an additional cost and a source...

  10. Automotive Electric Motors Innovation

    OpenAIRE

    Šimko, František

    2012-01-01

    V automobilech se vyskytuje velké množství motorků pro nejrůznější aplikace - některé typy aut obsahují i více než 50 motorků. Většinu tvoří stejnosměrné stroje, resp. stejnosměrné motorky. V této bakalářské práci jsou jednak popsány všechny typy motorků a jejich použití ve vozech, jednak jsou zde uvedeny směry vývoje motorků pro automobilovou elektrotechniku pro blízkou budoucnost. Je zde rozebrána problematika použití permanentních magnetů a návrh stejnosměrného motorku s permanentními magn...

  11. Neuropathic pain: transcranial electric motor cortex stimulation using high frequency random noise. Case report of a novel treatment

    Directory of Open Access Journals (Sweden)

    Alm PA

    2013-06-01

    Full Text Available Per A Alm, Karolina DreimanisDepartment of Neuroscience, Uppsala University, Uppsala, SwedenObjectives: Electric motor cortex stimulation has been reported to be effective for many cases of neuropathic pain, in the form of epidural stimulation or transcranial direct current stimulation (tDCS. A novel technique is transcranial random noise stimulation (tRNS, which increases the cortical excitability irrespective of the orientation of the current. The aim of this study was to investigate the effect of tRNS on neuropathic pain in a small number of subjects, and in a case study explore the effects of different stimulation parameters and the long-term stability of treatment effects.Methods: The study was divided into three phases: (1 a double-blind 100–600 Hz, varying from 0.5 to 10 minutes and from 50 to 1500 µA, at intervals ranging from daily to fortnightly.crossover study, with four subjects; (2 a double-blind extended case study with one responder; and (3 open continued treatment. The motor cortex stimulation consisted of alternating current random noise (100–600 Hz, varying from 0.5 to 10 minutes and from 50 to 1500 μA, at intervals ranging from daily to fortnightly.Results: One out of four participants showed a strong positive effect (also compared with direct-current-sham, P = 0.006. Unexpectedly, this effect was shown to occur also for very weak (100 µA, P = 0.048 and brief (0.5 minutes, P = 0.028 stimulation. The effect was largest during the first month, but remained at a highly motivating level for the patient after 6 months.Discussion: The study suggests that tRNS may be an effective treatment for some cases of neuropathic pain. An important result was the indication that even low levels of stimulation may have substantial effects.Keywords: neuropathic pain, central pain, transcranial direct current stimulation, motor cortex stimulation, random noise stimulation

  12. Methodology for quantifying the technological level of energy in electric motors; Metodologia para quantificacao do nivel tecnologico energetico de motores eletricos

    Energy Technology Data Exchange (ETDEWEB)

    Konopatzki, Evandro Andre; Bianchessi, Joel Marcos [Faculdade Assis Gurgacz (FAG), Cascavel, PR (Brazil); Oliveira, Celso Eduardo Lins de [Universidade de Sao Paulo (FZEA-USP), Pirassununga, SP (Brazil). Fac. de Zootecnia e Engenharia de Alimentos; Konopatzki, Angelica da Silva Lima [Faculdade de Ciencias Aplicadas de Cascavel (FACIAP), PR (Brazil). Curso de Ciencia da Computacao; Marim, Cesar [Universidade Estadual do Oeste do Parana (UNIOESTE), Cascavel, PR (Brazil)

    2006-07-01

    The market competition created in agricultural industry because of its insertion in the domestic and foreign markets, verified by the increase in GDP share of agribusiness in the Brazilian GDP, led us to have better control of costs and inputs. Thus the final value of products sold by these agribusinesses can download increasing the space in the consumer market. Electricity is one of the inputs now being studied and this paper presents a model for determining the coefficients that allow the comparison of different existing technologies for electric motors inserting an indicator of technological innovation called Technological Level Energy (NTE). The NTE was developed and tested in Storage Units of Grain (UAG) in the region of Cascavel - Parana where data were collected in six UAG, analyzed in medium weighted, had levels of different energy technology development. The main elements used to create the NTE are the number of engines installed in UAG, the lifetime of the engine considered from its manufacture and motor plate data such as income and the power factor. As a comparative process, each region can create your NTE and analyze your situation in a national context. The UAG will use the NTE to technological innovation and planning projects such as depreciation, financing and cross-examination of financial resources for the exchange of electric motors. Thus the NTE will aid in comparative indication of the timing for replacement of electric motors. Moment from which the energy demand, according to the obsolescence of equipment, are considered excessive compared to other more modern UAG. (author)

  13. Random walks in the quarter plane algebraic methods, boundary value problems, applications to queueing systems and analytic combinatorics

    CERN Document Server

    Fayolle, Guy; Malyshev, Vadim

    2017-01-01

    This monograph aims to promote original mathematical methods to determine the invariant measure of two-dimensional random walks in domains with boundaries. Such processes arise in numerous applications and are of interest in several areas of mathematical research, such as Stochastic Networks, Analytic Combinatorics, and Quantum Physics. This second edition consists of two parts. Part I is a revised upgrade of the first edition (1999), with additional recent results on the group of a random walk. The theoretical approach given therein has been developed by the authors since the early 1970s. By using Complex Function Theory, Boundary Value Problems, Riemann Surfaces, and Galois Theory, completely new methods are proposed for solving functional equations of two complex variables, which can also be applied to characterize the Transient Behavior of the walks, as well as to find explicit solutions to the one-dimensional Quantum Three-Body Problem, or to tackle a new class of Integrable Systems. Part II borrows spec...

  14. Coal-fired combustion system for industrial process heating applications. Quarterly technical progress report, April 1995--June 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    PETC has implemented a number of advanced combustion research projects that will lead to the establishment of a broad, commercially acceptable engineering data base for the advancement of coal as the fuel of choice for boilers, furnaces, and process heaters. This includes new installations and those existing installations that were originally designed for oil or gas firing. The data generated by these projects must be sufficient for private-sector decisions on the feasibility of using coal as the fuel of choice. This work should also provide incentives for the private sector to continue and expand the development, demonstration, and application of these combustion systems. Vortec Corporation`s Coal-Fired Combustion System for Industrial Process Heating Applications is being developed under contract DE-AC22-91PC91161 as part of this DOE development program. The current contract represents the third phase of a three-phase development program. Phase I of the program addressed the technical and economic feasibility of the process, and was initiated in 1987 and completed 1989. Phase II was initiated in 1989 and completed in 1990. During Phase II of the development, design improvements were made to critical components and the test program addressed the performance of the process using several different feedstocks. Phase III of the program was initiated September 1991 and is scheduled for completion in 1994. The Phase III research effort is being focused on the development of a process heater system to be used for producing value-added vitrified glass products from boiler/incinerator ashes and selected industrial wastes.

  15. Use of fluidized-bed combustion ash in agricultural applications. Quarterly technical progress report, July 1--September 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Korcak, R.

    1996-12-31

    The field experimental site was located on a well drained Beltsville silt loam soil. Field soil samples were analyzed for trace elements prior to treatment initiation from each of the 12 plot areas. Blackberry plants were planted in June 1995. In August 1995, foliar samples from the field planted blackberry plants were obtained prior to soil treatment applications, Average leaf fresh and dry weights were recorded as well as elemental analysis data. At the end of August, 1995, four plots were treated with fluidized bed combustion (FBC) materials, another four with (FBC) materials plus manure, and the remaining four were used as controls. Post-treatment foliar samples were obtained, weighed and analyzed. Blackberry fruit samples were also obtained, freeze-dried and analyzed. Twenty-four soil columns were constructed from 6 inches (ID) PVC pipes and filled with replicates of the field experiment, control (soil alone), FBC material, manure, and FBC material plus manure. The equivalent of 1 inch of rainfall (200 ml distilled water) was applied weekly for 16 weeks. The day after rainfall additions leachates were collected, filtered and analyzed for pH and electrical conductivity. The remaining sample volumes were frozen until the completion of the study and then analyzed for elemental content. These results are presented. Analysis of the FBC material and dairy manure used in all experiments are presented in Table 1. For comparative purposes, analysis of agricultural limestone is also presented.

  16. Fusion Power Program. Quarterly progress report, January-March 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-08-01

    This quarterly report summarizes the Argonne National Laboratory work performed for the Office of Fusion Energy during the January-March 1979 quarter in the following research and development areas: materials; energy storage and transfer; tritium containment, recovery and control; advanced reactor design; atomic data; reactor safety; fusion-fission hybrid systems; alternate applications of fusion energy; and other work related to fusion power.

  17. EMSL Quarterly Highlights Report: 1st Quarter, Fiscal Year 2009

    Energy Technology Data Exchange (ETDEWEB)

    Showalter, Mary Ann; Kathmann, Loel E.; Manke, Kristin L.

    2009-02-02

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2008 - December 2008) of Fiscal Year 2009.

  18. EMSL Quarterly Highlights Report: FY 2008, 3rd Quarter

    Energy Technology Data Exchange (ETDEWEB)

    Showalter, Mary Ann

    2008-09-16

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2007 - December 2007) of Fiscal Year 2008.

  19. EMSL Quarterly Highlights Report: 1st Quarter, FY08

    Energy Technology Data Exchange (ETDEWEB)

    Showalter, Mary Ann

    2008-01-28

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2007 - December 2007) of Fiscal Year 2008.

  20. Gifted Education Quarterly, 1998.

    Science.gov (United States)

    Fisher, Maurice, Ed.

    1998-01-01

    These four issues of "Gifted Education Quarterly" include the following articles: (1) "Using Test Results To Support Clinical Judgment" (Linda Kreger Silverman), which discusses some of the difficulties in obtaining accurate indications of a child's level of giftedness and the importance of using professional judgment in…

  1. Quarterly fiscal policy

    NARCIS (Netherlands)

    Kendrick, D.A.; Amman, H.M.

    2014-01-01

    Monetary policy is altered once a month. Fiscal policy is altered once a year. As a potential improvement this article examines the use of feedback control rules for fiscal policy that is altered quarterly. Following the work of Blinder and Orszag, modifications are discussed in Congressional

  2. South African Crime Quarterly

    African Journals Online (AJOL)

    South African Crime Quarterly is an inter-disciplinary peer-reviewed journal that promotes professional discourse and the publication of research on the subjects of crime, criminal justice, crime prevention, and related matters including state and non-state responses to crime and violence. South Africa is the primary focus for ...

  3. Quarterly environmental data summary for third quarter 1999

    Energy Technology Data Exchange (ETDEWEB)

    McCracken, Stephen H. [Weldon Spring Site, St. Charles, MO (United States)

    1999-11-05

    A copy of the quarterly Environmental Data Summary (QEDS) for the third quarter of 1999 is enclosed. The data, except for air monitoring data and site KPA generated data (uranium analyses), were received from the contract laboratories, verified by the WSSRAP verification group and merged into the data base during the third quarter of 1999. Selected KPA results for on-site total uranium analyses performed during the quarter are also included. Air monitoring data presented are the most recent complete sets of quarterly data.

  4. A Charge Distribution Analysis instrument for catalysis and material science applications. Second quarterly technical progress report, January 1, 1994--March 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Freund, F.; Plombon, J.J.

    1994-05-09

    The instrument has four basic components: OEM analytical balance, pivot point and capacitor plates for sensing and controlling the position of the long inverted pendulum, gas confinement tower and high voltage bias electrodes, and furnace. Work during the second quarter has resulted in detailed design of the pivot point and capacitive sensing and control assembly to be attached onto the platen of a Denver Instruments A-series analytical balance.

  5. Research and development of a proton-exchange-membrane (PEM) fuel cell system for transportation applications. Progress report for Quarter 4 of the Phase II report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-20

    This 4th quarter report summarizes activity from July 1, 1995 through October 1, 1995; the report is organized as usual into sections describing background information and work performed under the main WBS categories: The Fuel Processor (WBS 1.0) team activity during this quarter focused on the continued design/development of the full scale fuel processing hardware. The combustor test stand has been completed allowing more detailed testing of the various parts of the combustor subsystem; this subsystem is currently being evaluated using the dual fuel (methanol/hydrogen) option to gain a better understanding of the control issues. The Fuel Cell Stack (WBS 2.0) team activity focused on material analysis and testing to determine the appropriate approach for the first GM stack. Five hundred hours of durability was achieved on a single cell fixture using coated titanium plates (anode and cathode) with no appreciable voltage degradation of the SEL (Stack Engineering Lab) produced MEA. Additionally, the voltage level drop across each of the plates remained low (<5mv) over the full test period; The system integration and control team focused on the initial layout and configuration of the system; and the Reference powertrain and commercialization studies are currently under review.

  6. Application of reservoir characterization and advanced technology to improve recovery and economic in a lower quality shallow shelf carbonate reservoir. First quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, A.M.

    1995-05-04

    The focus of the project is to show that the use of advanced technology can improve the economics of CO{sub 2} projects in low permeability reservoirs. The approach involves the use of tomography, 3-D seismic and detailed petrophysical descriptions to enhance reservoir characterization. Cyclic CO{sub 2} stimulations and model designed frac treatments will be used to increase and facilitate oil recovery to improve project economics. The detailed reservoir characterization will be used to create a geological model for use in simulation to arrive at an optimum operating plan to be instituted during the second budget period. Objectives to be accomplished during the third quarter include: (1) Complete petrophysical description on cores from observation wells. (2) Apply petrophysical data to geologic model. (3) Conduct additional laboratory analysis on cores and fluids. (4) Refine 3-D seismic interpretations. (5) Complete tomography surveys. (6) Process tomography data. (7) Establish relationship between seismic and tomography interpretations. (8) Conduct preliminary simulator runs with improved geologic model. (9) Evaluate results of cyclic CO{sub 2} stimulation treatments. (10) Design frac treatment for linear flood fronts. All of the above objectives were worked on during the current quarter and the overall project is fairly well on schedule. The area of greatest concern time-wise is reservoir simulation. The simulator depends on the geologic model, which in turn depends on the petrophysical, 3-D seismic and tomography interpretations. Hence, the final geologic model won`t be available until all of the reservoir characterization work is completed.

  7. Design Study for Controllable Electric Motor for Three Wheel Drive, In Wheel Mounting on Professional, Electric, Lawn Mower

    DEFF Research Database (Denmark)

    Lu, Kaiyuan

    Design of a new generation of electric drive motor for professional lawnmowers forms the basic objective of this thesis. Modern drive concepts produces a growing demand for electrical machines featuring high torque density, and suitable for direct drive applications. Much attention is presently f...

  8. Selection of electric motors for industrial processes with the rational energy use criteria; Seleccion de motores electricos para procesos industriales con criterios de uso racional de la energia

    Energy Technology Data Exchange (ETDEWEB)

    Morales Collantes, Arturo [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

    1992-12-31

    Under the energy and ecological crisis we are now going through, but fundamentally because as human beings we can not keep on acting in such a thoughtless way, I write these notes, with the intention that we take more into consideration that whatever we do to improve the ways of energy consumption, will ease the human life preservation. The electric motors selection, plays an important roll in this respect, since it represents the highest percentage of electric energy consumption at national level. Therefore I will point out some basic criteria for an adequate selection. [Espanol] Ante la crisis energetica y ecologica por la que actualmente pasamos, pero fundamentalmente porque como seres humanos no podemos seguir actuando en forma tan irreflexiva, escribo estas notas, con la intencion de que tomemos mas en cuenta, que lo que hagamos para mejorar las formas de consumo de energia, facilitara la preservacion de la vida humana. La seleccion de motores electricos, juega un importante papel al respecto, ya que representa el mayor porcentaje del consumo de energia electrica a nivel nacional, por lo tanto senalare algunos criterios basicos para una adecuada seleccion.

  9. Análisis vibrodinámico de motores eléctricos // Vibrational and dynamic analysis of electric motors

    Directory of Open Access Journals (Sweden)

    Orestes González-Quintero

    2010-01-01

    Full Text Available ResumenEl artículo aborda el estudio vibrodinámico ejecutado en motores eléctricos de la fábrica de azúcar“Cristino Naranjo” durante la implementación del mantenimiento predictivo. En el mismo seexponen los trabajos realizados en las diferentes etapas de implementación del mantenimiento y eldiagnóstico de defectos mediante la utilización del análisis espectral de vibraciones. Se muestranespectros de motor con problemas y en funcionamiento normal.Palabras claves: Ingeniería de Mantenimiento, Mantenimiento Predictivo, análisis, vibraciones.__________________________________________________________________________________AbstractThis work is concerned with the vibrational and dynamic study of electrical motors located inCristino Naranjo sugar mill. It is done during the predictive maintenance implementation. At thesome time some works are shown during this process as well the failures diagnostic by means ofthe use of spectrum analysis of vibration. The spectrums shown are related to motors withdifficulties or well working.Key words: Maintenance Engineering, Predictive Maintenance, vibration, análisis.

  10. Design of a PC Based Mass Flow Indicator of an Electrical Motor Driven Water Lift Pump Using Motor Load Current as the Flow Sensing Parameter

    Directory of Open Access Journals (Sweden)

    S. C. BERA

    2009-09-01

    Full Text Available Mass flow rate of liquid at the outlet of a liquid lift pump is an important parameter to be measured and controlled in a process industry. In the present paper, the design of a PC based mass flow indicator of an electrical motor driven water lift pump using motor load current as the mass flow sensing parameter has been studied. The motor load current has been sensed by an opto-isolator based circuit and the output of this circuit has been displayed in a PC monitor using Labtech Note Book Pro software. A theoretical equation relating the output of opto-isolator circuit with mass flow rate has been derived and experimental study has been carried out to verify this theoretical equation, assuming the volume flow rate of water at constant room temperature to be proportional to mass flow rate. The experimental results are presented in the paper. It has been observed that the opto-isolator output and the on-line display in PC monitor both vary almost linearly with mass flow rate. Percentage deviation of the experimental results from ideal linearity and repeatability in terms of standard deviation are found to be within tolerable limit.

  11. Fusion Power Program. Quarterly progress report, October--December 1978

    Energy Technology Data Exchange (ETDEWEB)

    1979-04-01

    This quarterly report summarizes the Argonne National Laboratory work performed for the Office of Fusion Energy during the October--December 1978 quarter in the following research and development areas: materials; energy storage and transfer; tritium containment, recovery and control; advanced reactor design; atomic data; reactor safety; fusion-fission hybrid systems; alternate applications of fusion energy; and other work related to fusion power. Three separate abstracts were prepared for the included sections. (MOW)

  12. One-Quarter-Car Active SuspensionModel Verification

    Directory of Open Access Journals (Sweden)

    Hyniova Katerina

    2017-01-01

    Full Text Available Suspension system influences both the comfort and safety of the passengers. In the paper, energy recuperation and management in automotive suspension systems with linear electric motors that are controlled by a designed H∞ controller to generate a variable mechanical force for a car damper is presented. Vehicle shock absorbers in which forces are generated in response to feedback signals by active elements obviously offer increased design flexibility compared to the conventional suspensions with passive elements (springs and dampers. The main advantage of the proposed solution that uses a linear AC motor is the possibility to generate desired forces acting between the unsprung (wheel and sprung (one-quarter of the car body mass masses of the car, providing good insulation of the car sprung mass from the road surface roughness and load disturbances. As shown in the paper, under certain circumstances linear motors as actuators enable to transform mechanical energy of the vertical car vibrations to electrical energy, accumulate it, and use it when needed. Energy flow control enables to reduce or even eliminate the demands on the external power source. In particular, the paper is focused on experiments with active shock absorber that has been taken on the designed test bed and the way we developed an appropriate input signal for the test bed that as real road disturbance acts upon the vibration absorber and the obtained results are evaluated at the end. Another important point the active suspension design should satisfy is energy supply control that is made via standard controller modification, and which allows changing amount of energy required by the system. Functionality of the designed controller modification was verified taking various experiments on the experiment stand as mentioned in the paper.

  13. The optimization of electric motors repair techniques as a mean for electric energy saving; La optimizacion de las tecnicas de reparacion de motores electricos como un medio para ahorrar energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Zagal Leon, Juan Ruben [Fideicomiso para el Ahorro de Energia Electrica (FIDE), Mexico, D. F. (Mexico)

    1998-12-31

    This paper presents, in a very concise, which are the techniques to optimize the electric motors repair made by the Fideicomiso para el Ahorro de Energia Electrica (FIDE), the loss of efficiency that might exist after repairing an electric motor, as well as the procedures to perform an optimum reparation of the electric motors. Furthermore, some recommendations are given for the selection of an adequate rewinding shop to guarantee that the motor does not suffer efficiency losses after its repair. [Espanol] Este trabajo presenta, de manera muy concreta, cuales son las tecnicas para optimizar las tecnicas de reparacion de motores electricos realizado por el Fideicomiso para el Ahorro de Energia Electrica (FIDE), el nivel de perdida de eficiencia que puede existir despues de reparar un motor electrico, asi como los procedimientos para realizar una optima reparacion en motores electricos. Asimismo, se proporcionan algunas recomendaciones para seleccionar un taller de reembobinado adecuado para garantizar que el motor no sufra perdidas de eficiencia despues de su reparacion.

  14. Joint Force Quarterly. Issue 41, 2nd Quarter, April 2006

    Science.gov (United States)

    2006-04-01

    companies participated, a million more people would be actively looking for threats. Aguas de Amazonas, a subsidiary of Suez Environnement, a...9 Richard B. Myers, “A Word from the Chair- man,” Joint Force Quarterly 37 (2d Quarter 2005), 5. 10 Wald, 26. 11 “Suez— Aguas de Amazonas Water for...humanitarian duties. They have overseen over 130 humani- tarian projects worth in excess of $7.6 million and ranging from a medical center, to potable

  15. Electronic Service Statistics - Quarterly Report

    Data.gov (United States)

    Social Security Administration — This is a quarterly report that compares electronic data vs non-electronic data for electronic services. Report contains six main sections namely, electronic access,...

  16. 2nd Quarter Transportation Report FY 2014

    Energy Technology Data Exchange (ETDEWEB)

    Gregory, L. [National Security Technologies, LLC, Las Vegas, NV (United States) (United States)

    2014-07-01

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the second quarter of fiscal year (FY) 2014 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. This report also includes annual summaries for FY 2014 in Tables 4 and 5. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report do not include minor volumes of non-radioactive materials that were approved for disposal. Volume reports showing cubic feet (ft3) generated using the Low-Level Waste Information System may vary slightly due to differing rounding conventions.

  17. Scientific Articles on Magnetic Materials and Applications Research from 2006 - 2014

    Science.gov (United States)

    2015-03-01

    magnetic applications were for power applications. These power applications include inductors, transformers, electric motors , generators, actuators...equation is P = AfαBβ` (1) where P is power los (W/kg), A is the fitting coefficient, f is the frequency (kHz) and B is the flux density ( Tesla ) and α

  18. Quarterly environmental data summary for first quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    In support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement, a copy of the Quarterly Environmental Data Summary (QEDS) for the first quarter of 1998 is enclosed. The data presented in this letter and attachment constitute the QEDS. The data were received from the contract laboratories, verified by the Weldon Spring Site verification group and, except for air monitoring data and site KPA generated data (uranium analyses), merged into the data base during the first quarter of 1998. Air monitoring data presented are the most recent complete sets of quarterly data. Air data are not stored in the data base, and KPA data are not merged into the regular data base. Significant data, defined as data values that have exceeded defined {open_quotes}above normal{close_quotes} Level 2 values, are discussed in this letter for Environmental Monitoring Plan (EMP) generated data only. Above normal Level 2 values are based, in ES&H procedures, on historical high values, DOE Derived Concentration Guides (DCGs), NPDES limits and other guidelines. The procedures also establish actions to be taken in the event that {open_quotes}above normal{close_quotes} data occur. All data received and verified during the first quarter were within a permissible range of variability except for those detailed below. Above normal occurrences are cited for groundwater, air, and NPDES data. There were none for springs or surface water. The following discussion offers a brief summary of the data merged during the first quarter that exceeded the above normal criteria and updates on past reported above normal data. The attached tables present the most recent data for air and the data merged into the data base during the first quarter 1998 for groundwater, NPDES, surface water, and springs. Graphs showing concentrations of selected contaminants of concern at some of the critical locations have also been included in this QEDS. The graphs are discussed in the separate sections.

  19. Quarterly coal report, July--September 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks. Coke production consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for July through September 1997 and aggregated quarterly historical data for 1991 through the second quarter of 1997. Appendix A displays, from 1991 on, detailed quarterly historical coal imports data. 72 tabs.

  20. Joint Force Quarterly. Issue 59, 4th Quarter 2010

    Science.gov (United States)

    2010-10-01

    JFQ NO T e S 1 Carlo D’ Este, Eisenhower: A Soldier’s Life (New York: Holt and Co., 2002), 693. 2 John R. Deni, Alliance Management and...Director of DOD Force Structure brief press on QDR and Ballistic Missile Defense Review DOD (Cherie Cullen ) ndupress .ndu.edu issue 59, 4 th quarter...Iraq commander GEN Odierno  updates press on state of affairs in Iraq DOD (Cherie Cullen ) ndupress .ndu.edu issue 59, 4 th quarter 2010 / JFQ

  1. Inventory and case studies of Louisiana, non-electric industrial applications of geopressured geothermal resources. Quarterly progress report, March 1-May 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Schnadelbach, T.W. Jr.

    1977-06-01

    An inventory is provided of geopressured geothermal resources in Louisiana. The Louisiana industries; classified as Food and Kindred Products were cataloged and inventoried to determine potential and specific uses of the known energy resources. The possibility of relocating industries to the available resources is explored. Individual case studies are presented for near term industrial conversion for resource application. (MHR)

  2. Estudo comparativo de métodos para estimativa do carregamento e rendimento de motores elétricos para auditoria energética Comparative study for estimation of load and performance of electric motors for energy audit

    Directory of Open Access Journals (Sweden)

    Saulo Campana

    2000-01-01

    Full Text Available Este artigo investiga a precisão de três métodos indiretos para a determinação do índice de carregamento e rendimento de motores elétricos. Determinou-se o erro da estimativa do índice de carregamento e rendimento de motores elétricos pela média aritmética e geométrica das correntes e pela média aritmética dos fatores de potência. Mostrou-se, também, a importância da determinação do decréscimo do rendimento de motores elétricos, decorrente da variação de tensão da rede elétrica. Verificou-se que a estimativa do índice de carregamento e do rendimento dos motores elétricos por meio da medição do fator de potência médio aritmético apresentou resultados com maiores erros percentuais, 24,5% e 2%, respectivamente; já estas estimativas apresentaram, pelos métodos da corrente média aritmética e média geométrica, resultados semelhantes entre si e com erros percentuais significativamente inferiores aos resultados anteriores, ou seja, 6,2% e 1%, respectivamente.This article investigates the precision of methods for the load and efficiency estimate of electric motors. The error was determined by the estimate of load and efficiency of electric motors using the arithmetic and geometric average of the currents and the arithmetic average of the power factor in each phase. The importance was shown of the determination of the decrease in the electric motors' performance due to the variation of feeder tension, when the motors' load and performance evaluation in the load condition is performed. It was verified that the estimate of the electric motors' load and performance by the arithmetic average power factor, presented results with larger errors, that is, 24.5% and 2%, respectively. These estimates by the arithmetic and geometric average current method presented similar results to each other and with percentage errors significantly inferior to the previous results, that is, 6.2% and 1%, respectively.

  3. Engineering development of advanced physical fine coal cleaning for premium fuel applications. Quarterly technical progress report 16, July--September, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Shields, G.L.; Moro, N.; Smit, F.J.; Jha, M.C.

    1996-10-30

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by the design, construction, and operation of a 2-t/hr process development unit (PDU). The project began in October, 1992, and is scheduled for completion by September 1997. 28 refs., 13 figs., 19 tabs.

  4. Applied Meteorology Unit (AMU) Quarterly Report First Quarter FY-04

    Science.gov (United States)

    Bauman, William; Wheeler, Mark; Labert, Winifred; Jonathan Case; Short, David

    2004-01-01

    This report summarizes the Applied Meteorology Unit (AMU) activities for the First Quarter of Fiscal Year 2004 (October - December 2003). Tasks reviewed are: (1) Objective Lightning Probability Forecast, (2) Mesonet Temperature and Wind Climatology, (3) Severe Weather Forecast Decision Aid and (4) Anvil Transparency Relationship to Radar Reflectivity

  5. Short-term energy outlook, Quarterly projections. Third quarter 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-08-04

    The Energy Information Administration (EIA) prepares quarterly, short-term energy supply, demand, and price projections for publication in February, May, August, and November in the Short-Term Energy Outlook (Outlook). An annual supplement analyzes the performance of previous forecasts, compares recent cases with those of other forecasting services, and discusses current topics related to the short-term energy markets. (See Short-Term Energy Outlook Annual Supplement, DOE/EIA-0202.) The forecast period for this issue of the Outlook extends from the third quarter of 1993 through the fourth quarter of 1994. Values for the second quarter of 1993, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in the Weekly Petroleum Status Report) or are calculated from model simulations using the latest exogenous information available (for example, electricity sales and generation are simulated using actual weather data). The historical energy data are EIA data published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding.

  6. Joint Force Quarterly. Issue 76, 1st Quarter 2015

    Science.gov (United States)

    2015-01-01

    Ship 2 (U.S. Navy/ Carlos Gomez) JFQ 76, 1st Quarter 2015 Greenert 13 surface, or subsurface. Our ships are ideal platforms to carry specialized...Determinism, ed. Merritt Roe Smith and Leo Marx , 176 (Cambridge: MIT Press, 1994). 21 “Give me your scientists . . . ,” The Economist, March 5, 2009

  7. Short-Term Energy Outlook: Quarterly projections. Fourth quarter 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-05

    The Energy Information Administration (EIA) prepares quarterly, short-term energy supply, demand, and price projections for publication in February, May, August, and November in the Short-Term Energy Outlook (Outlook). An annual supplement analyzes the performance of previous forecasts, compares recent cases with those of other forecasting services, and discusses current topics related to the short-term energy markets. (See Short-Term Energy Outlook Annual Supplement, DOE/EIA-0202.) The forecast period for this issue of the Outlook extends from the fourth quarter of 1993 through the fourth quarter of 1994. Values for the third quarter of 1993, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in the Weekly Petroleum Status Report) or are calculated from model simulations using the latest exogenous information available (for example, electricity sales and generation are simulated using actual weather data). The historical energy data are EIA data published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications.

  8. Solar heating and cooling systems design and development: quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    1977-11-11

    This program calls for the development and delivery of eight prototype solar heating and cooling systems for installation and operational test. Two heating and six heating and cooling units will be delivered for single-family residences, multiple-family residences and commercial applications. This document describes the progress of the program during the fifth program quarter, 1 July 1977 to 30 September 1977.

  9. Parallel Damping Injection for the Quarter Car Suspension System.

    NARCIS (Netherlands)

    Scherpen, Jacquelien M.A.; Jeltsema, Dimitri; Maulny, François

    2006-01-01

    In this paper we study an application of Passivity-Based Control (PBC) to a quarter car suspension system. We use Passivity-Based Control in the Brayton-Moser framework (BM-PBC) that has recently been developed for control of switching and non-switching electrical circuits. Via the usual

  10. South African Crime Quarterly: Submissions

    African Journals Online (AJOL)

    SACQ is a quarterly journal published by the Crime and Justice Programme of the Institute for Security Studies. The journal is published in hard copy and is available on our website: www.issafrica.org. The journal is widely read nationally and internationally by criminal justice practitioners, researchers and academics.

  11. South African Crime Quarterly 59

    African Journals Online (AJOL)

    SA Crime QuArterly No. 59 • mArCh 2017. De Vos NO v. Minister of Justice and Constitutional. Development. The constitutionality of detaining persons unfit to stand trial. * Franaaz Khan (LLB LLM) is a lecturer in Law, at the University of. KwaZulu-Natal, Durban. Section 35 of the Constitution protects an accused's right to a ...

  12. Spiraling Light with Magnetic Metamaterial Quarter-Wave Turbines.

    Science.gov (United States)

    Zeng, Jinwei; Luk, Ting S; Gao, Jie; Yang, Xiaodong

    2017-09-19

    Miniaturized quarter-wave plate devices empower spin to orbital angular momentum conversion and vector polarization formation, which serve as bridges connecting conventional optical beam and structured light. Enabling the manipulability of additional dimensions as the complex polarization and phase of light, quarter-wave plate devices are essential for exploring a plethora of applications based on orbital angular momentum or vector polarization, such as optical sensing, holography, and communication. Here we propose and demonstrate the magnetic metamaterial quarter-wave turbines at visible wavelength to produce radially and azimuthally polarized vector vortices from circularly polarized incident beam. The magnetic metamaterials function excellently as quarter-wave plates at single wavelength and maintain the quarter-wave phase retardation in broadband, while the turbine blades consist of multiple polar sections, each of which contains homogeneously oriented magnetic metamaterial gratings near azimuthal or radial directions to effectively convert circular polarization to linear polarization and induce phase shift under Pancharatnum-Berry's phase principle. The perspective concept of multiple polar sections of magnetic metamaterials can extend to other analogous designs in the strongly coupled nanostructures to accomplish many types of light phase-polarization manipulation and structured light conversion in the desired manner.

  13. Mixed Waste Management Facility groundwater monitoring report, First quarter 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    During first quarter 1994, nine constituents exceeded final Primary Drinking Water Standards in groundwater samples from downgradient monitoring wells at the Mixed Waste Management Facility, the Old Burial Ground, the E-Area Vaults, the proposed Hazardous Waste/Mixed Waste Disposal Vaults, and the F-Area Sewage Sludge Application Site. As in previous quarters, tritium and trichloroethylene were the most widespread elevated constituents. Chloroethene (vinyl chloride), copper, 1,1-dichloroethylene, lead, mercury, nonvolatile beta, or tetrachloroethylene also exceeded standards in one or more wells. Elevated constituents were found in numerous Aquifer Zone IIB{sub 2} (Water Table) and Aquifer Zone IIB{sub 1}, (Barnwell/McBean) wells and in one Aquifer Unit IIA (Congaree) well. The groundwater flow directions and rates in the three hydrostratigraphic units were similar to those of previous quarters.

  14. 10 CFR 34.29 - Quarterly inventory.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Quarterly inventory. 34.29 Section 34.29 Energy NUCLEAR... RADIOGRAPHIC OPERATIONS Equipment § 34.29 Quarterly inventory. (a) Each licensee shall conduct a quarterly physical inventory to account for all sealed sources and for devices containing depleted uranium received...

  15. Quarterly financial reports | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2009-12-15

    Canada's Financial Administration Act was amended on December 15, 2009. As a result, federal government departments and parent Crown corporations are required to prepare quarterly financial reports for each of the first three quarters of the fiscal year, starting April 1, 2011. You will find them here. Quarterly financial ...

  16. Design and development of Stirling engines for stationary power generation applications in the 500 to 3000 horsepower range. First quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    ,

    1980-01-07

    This project is Phase I of a multi-phased program for the design and development of Stirling engines for stationary power generation applications in the 500 to 3000 horsepower range. Phase I comprises the conceptual design and associated cost estimates of a stationary Stirling engine capable of being fueled by a variety of heat sources, with emphasis on coal firing, followed by the preparation of a plan for implementing the design, fabrication and testing of a demonstration engine by 1985. The main effort in Phase I is the generation of state-of-the-art conceptual designs having greatest potential for prototype testing in 1985. The conceptual designs include a heat transport system for integrating the engine heater head with such energy sources as conventional oil/gas combustors, fluidized bed and other coal combustors, and combustors using coal-derived liquid fuels, and low/medium BTU gases. The heat transport systems being investigated include forced convection with gases or liquids, heat pipes, and direct firing. Currently, the leading choice for the solid fuel combustion system is the atmospheric fluidized bed, with low BTU gasification still a viable alternative. Both systems will continue to be evaluated further, but with greater emphasis on FBC. To date, there appears no clear choice among the heat pipe, forced convection gas loop, or direct firing as the prime candidate for the heat transport sub-system. Conceptual design and analysis will continue on all three sub-systems. Scale-up of United Stirling's P-75 engine to serve as the conceptual design of the 500 HP engine module is continuing. (LCL)

  17. Applied Meteorology Unit (AMU) Quarterly Report Fourth Quarter FY-04

    Science.gov (United States)

    Bauman, William; Wheeler, Mark; Lambert, Winifred; Case, Jonathan; Short, David

    2004-01-01

    This report summarizes the Applied Meteorology Unit (A MU) activities for the fourth quarter of Fiscal Year 2004 (July -Sept 2004). Tasks covered are: (1) Objective Lightning Probability Forecast: Phase I, (2) Severe Weather Forecast Decision Aid, (3) Hail Index, (4) Shuttle Ascent Camera Cloud Obstruction Forecast, (5) Advanced Regional Prediction System (ARPS) Optimization and Training Extension and (5) User Control Interface for ARPS Data Analysis System (ADAS) Data Ingest.

  18. Joint Force Quarterly. Issue 57, 2nd Quarter 2010

    Science.gov (United States)

    2010-04-01

    Iraq to the west of the city. Many civilians, including women and children , were killed or injured. The one by one, precincts would be swarmed by...quarter 2010 ndupress .ndu.edu COMMENTARY | UAS: The Moral and Legal Case number and kind of innocent civilians sur- rounding the target ( children in...turn some of them into psychopath -like killers? If all or most fighting were done in a cold-blooded, push-button way, it might well have the

  19. Software Engineering Institute Quarterly Update

    Science.gov (United States)

    1993-06-01

    tutorials: " Internet Security for Managers" and " Internet Security for System and Network Administrators." These t- tutorials were presented at the first... Internet security incident. The CERT charter is to work with the Response Team Internet community to facilitate its response to computer security events...also available via anonymous FTP from the cert. org system. This quarter, new releases of two tutorials were completed: " Internet Security for

  20. Prophylactic effects of two selective dry cow strategies accounting for interdependence of quarter.

    Science.gov (United States)

    Berry, E A; Johnston, W T; Hillerton, J E

    2003-12-01

    Infusion of a long-acting antibiotic preparation at drying off in dairy cows as a prophylactic therapy is usually recommended for all quarters where it is in use. Studying the effectiveness of such treatment using quarter as the unit of analysis assumes that each quarter within a cow has a risk of being infected independent of the other quarters of the cow. Failure to account for interdependence of quarters within a cow may lead to inaccurate variance estimates and errors in assessing treatment effects. Data from two trials assessing different dry-cow strategies were examined for interdependence of infection between quarters. Logistic regression with a variance inflation factor or a multilevel analysis was used to assess the effect of antibiotic and internal teat-sealant dry cow strategies. Parity and infection status at drying off were covariates in the analysis. Interdependence of the risk of quarter infections within control-group cows was demonstrated in both dry-cow antibiotic and teat-seal trials. However, cows that received either of these treatments did not demonstrate interdependence. Treated quarters in both trials were 3.0 times less likely to acquire a new infection at calving compared with the untreated controls. Quarters in cows of parity 3 or greater were also at an increased risk in the antibiotic treatment trial. In both trials, quarters with either Corynebacterium spp. or coagulase-negative staphylococci infections at drying off had an increased risk of a new intramammary infection at calving. This study has demonstrated the beneficial and comparable effects of antibiotic and teat seal dry cow strategies; both decreased the risk of intramammary infection at calving. The application of dry-cow strategies at the cow level and not the quarter level is also supported.

  1. Applied Meteorology Unit (AMU) Quarterly Report. First Quarter FY-05

    Science.gov (United States)

    Bauman, William; Wheeler, Mark; Lambert, Winifred; Case, Jonathan; Short, David

    2005-01-01

    This report summarizes the Applied Meteorology Unit (AMU) activities for the first quarter of Fiscal Year 2005 (October - December 2005). Tasks reviewed include: (1) Objective Lightning Probability Forecast: Phase I, (2) Severe Weather Forecast Decision Aid, (3) Hail Index, (4) Stable Low Cloud Evaluation, (5) Shuttle Ascent Camera Cloud Obstruction Forecast, (6) Range Standardization and Automation (RSA) and Legacy Wind Sensor Evaluation, (7) Advanced Regional Prediction System (ARPS) Optimization and Training Extension, and (8) User Control Interface for ARPS Data Analysis System (ADAS) Data Ingest

  2. Applied Meteorology Unit (AMU) Quarterly Report Third Quarter FY-08

    Science.gov (United States)

    Bauman, William; Crawford, Winifred; Barrett, Joe; Watson, Leela; Dreher, Joseph

    2008-01-01

    This report summarizes the Applied Meteorology Unit (AMU) activities for the third quarter of Fiscal Year 2008 (April - June 2008). Tasks reported on are: Peak Wind Tool for User Launch Commit Criteria (LCC), Anvil Forecast Tool in AWIPS Phase II, Completion of the Edward Air Force Base (EAFB) Statistical Guidance Wind Tool, Volume Averaged Height Integ rated Radar Reflectivity (VAHIRR), Impact of Local Sensors, Radar Scan Strategies for the PAFB WSR-74C Replacement, VAHIRR Cost Benefit Analysis, and WRF Wind Sensitivity Study at Edwards Air Force Base

  3. Applied Meteorology Unit (AMU) Quarterly Report - Fourth Quarter FY-09

    Science.gov (United States)

    Bauman, William; Crawford, Winifred; Barrett, Joe; Watson, Leela; Wheeler, Mark

    2009-01-01

    This report summarizes the Applied Meteorology Unit (AMU) activities for the fourth quarter of Fiscal Year 2009 (July - September 2009). Tasks reports include: (1) Peak Wind Tool for User Launch Commit Criteria (LCC), (2) Objective Lightning Probability Tool. Phase III, (3) Peak Wind Tool for General Forecasting. Phase II, (4) Update and Maintain Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS), (5) Verify MesoNAM Performance (6) develop a Graphical User Interface to update selected parameters for the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLlT)

  4. Short-term energy outlook. Quarterly projections, Third quarter 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-02

    The Energy Information Administration (EIA) prepares quarterly, short-term energy supply, demand, and price projections for publication in February, May, August, and November in the Short-Term Energy Outlook (Outlook). An annual supplement analyzes the performance of previous forecasts, compares recent cases with those of other forecasting services, and discusses current topics related to the short-term energy markets. (See Short-Term Energy Outlook Annual Supplement, DOE/EIA-0202). The feature article for this issue is Demand, Supply and Price Outlook for Reformulated Gasoline, 1995.

  5. Electric motor efficiency as parameter for sizing a directly connected into transformer feeder cable; Rendimento de motor eletrico como parametro de dimensionamento de bitola de alimentador conectado diretamente ao transformador

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira Filho, Delly; Lacerda Filho, Adilio F.; Martins, Jose H.; Queiroz, Josue M. [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Engenharia Agricola], Emails: delly@ufv.br, alacerda@ufv.br, jhmartins@ufv.br, josue.queiroz@ufv.br; Teixeira, Carlos A. [Universidade Federal Rural de Pernambuco, Serra Talhada, PE (Brazil). Dept. de Agronomia], E-mail: carlos.teixeira@uast.ufrpe.br

    2010-09-15

    The feeder conductors sizing does not take into account criterion for rational use of electricity. This study is about feeder conductors sizing evaluation for motors connected directly to transformers used in rural electrification. In the feeder conductors sizing indicate that besides the attendance of the technical standard (i.e. sizing as a function of the feeder current capacity and the allowable voltage drop) is also to be considered: the number of working hours, the feeder's electrical characteristic and price, the installation characteristics as length and engine's rate. According to the above, in some situations it may be advantageous to increase the gauge of the conductor. It was proven that in some situations it is advantageous to increase the conductor gauge beyond that required by the standards in order to save energy and expenses by the lower feeder losses and by the electric motor higher efficiency. (author)

  6. Quarterly coal report, October--December 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. The data presented in the QCR are collected and published by the Energy Information Administration (EIA) to fulfill data collection and dissemination responsibilities. This report presents detailed quarterly data for october through December 1997 and aggregated quarterly historical data for 1991 through the third quarter of 1997. Appendix A displays, from 1991 on, detailed quarterly historical coal imports data, as specified in Section 202 of the energy Policy and Conservation Amendments Act of 1985 (Public Law 99-58). Appendix B gives selected quarterly tables converted to metric tons. To provide a complete picture of coal supply and demand in the US, historical information has been integrated in this report. 8 figs., 73 tabs.

  7. Quarterly coal report, April--June 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-11-02

    The Quarterly Coal Report provides comprehensive information about US coal production, exports, imports, receipts, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. This issue presents detailed quarterly data for April 1990 through June 1990, aggregated quarterly historical data for 1982 through the second quarter of 1990, and aggregated annual historical data for 1960 through 1989 and projected data for selected years from 1995 through 2010. To provide a complete picture of coal supply and demand in the United States, historical information and forecasts have been integrated in this report. 7 figs., 37 tabs.

  8. Quarterly coal report, January--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-20

    The United States produced 242 million short tons of coal in the first quarter of 1993, a decrease of 6 percent (14 million short tons) from the amount produced during the first quarter of 1992. The decrease was due to a decline in production east of the Mississippi River. All major coal-producing States in this region had lower coal production levels led by West Virginia, which produced 5 million short tons less coal. The principal reasons for the overall drop in coal output compared to a year earlier were: A decrease in demand for US coal in foreign markets; a slower rate of producer/distributor stock build-up; and a drawn-down of electric utility coal stocks. Distribution of US coal in the first quarter of 1993 was 10 million short tons lower than in the first quarter of 1992, with 5 million short tons less distributed to both electric utilities and overseas markets. The average price of coal delivered to electric utilities during the first quarter of 1993 was $28.65 per short ton, the lowest value since the first quarter of 1980. Coal consumption in the first quarter of 1993 was 230 million short tons, 4 percent higher than in the first quarter of 1992, due primarily to a 5-percent increase in consumption at electric utility plants. Total consumer stocks, at 153 million short tons, and electric utility stocks, at 144 million short tons, were at their lowest quarterly level since the end of 1989. US. coal exports totaled 19 million short tons, 6 million short tons less than in the first quarter of 1992, and the lowest quarterly level since 1988. The decline was primarily due to a 1-million-short-ton drop in exports to each of the following destinations: Italy, France, Belgium and Luxembourg, and Canada.

  9. Applied Meteorology Unit (AMU) Quarterly Report - Fourth Quarter FY-10

    Science.gov (United States)

    Bauman, William; Crawford, Winifred; Barrett, Joe; Watson, Leela; Wheeler, Mark

    2010-01-01

    Three AMU tasks were completed in this Quarter, each resulting in a forecast tool now being used in operations and a final report documenting how the work was done. AMU personnel completed the following tasks (1) Phase II of the Peak Wind Tool for General Forecasting task by delivering an improved wind forecasting tool to operations and providing training on its use; (2) a graphical user interface (GUI) she updated with new scripts to complete the ADAS Update and Maintainability task, and delivered the scripts to the Spaceflight Meteorology Group on Johnson Space Center, Texas and National Weather Service in Melbourne, Fla.; and (3) the Verify MesoNAM Performance task after we created and delivered a GUI that forecasters will use to determine the performance of the operational MesoNAM weather model forecast.

  10. Mixed Waste Management Facility FSS Well Data Groundwater Monitoring Report. Fourth Quarter 1994 and 1994 summary

    Energy Technology Data Exchange (ETDEWEB)

    Chase, J.A.

    1995-03-01

    During fourth quarter 1994, ten constituents exceeded final Primary Drinking Water Standards (PDWS) in groundwater samples from downgradient monitoring wells at the Mixed Waste Management Facility, the Old Burial Ground, the E-Area Vaults, the proposed Hazardous Waste/Mixed Waste Disposal Vaults, and the F-Area Sewage Sludge Application Site. No constituent exceeded final PDWS in samples from the upgradient monitoring wells. The groundwater flow directions and rates in the three hydrostratigraphic units were similar to those of previous quarters.

  11. Weldon Spring Site Remedial Action Project quarterly environmental data summary (QEDS) for fourth quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    This report contains the Quarterly Environmental Data Summary (QEDS) for the fourth quarter of 1998 in support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement. The data, except for air monitoring data and site KPA generated data (uranium analyses) were received from the contract laboratories, verified by the Weldon Spring Site verification group, and merged into the database during the fourth quarter of 1998. KPA results for on-site total uranium analyses performed during fourth quarter 1998 are included. Air monitoring data presented are the most recent complete sets of quarterly data.

  12. United States housing, third quarter 2013

    Science.gov (United States)

    Delton Alderman

    2017-01-01

    The U.S. housing construction market’s third quarter was subdued, as all sectors moderated or declined. Once again, consensus expectations were for aggregate housing market gains, and these expectations were not realized. Overall starts, housing under construction, and completion data indicated quarterly improvement. Viewed from a recent his¬torical context, all...

  13. Nigerian Quarterly Journal of Hospital Medicine

    African Journals Online (AJOL)

    Nigerian Quarterly Journal of Hospital Medicine is published quarterly and the contents include articles in Medicine, Dentistry, Pharmaceutical and Basic Medical Sciences with emphasis on health problems and solutions relating to developing countries. The readership are in - Libraries, Teaching Hospitals, Universities, ...

  14. United States housing, second quarter 2013

    Science.gov (United States)

    Delton Alderman

    2017-01-01

    The U.S. housing market’s quarter two results were disap¬pointing compared with the first quarter. Although overall expected gains did not materialize, certain sectors improved slightly. Housing under construction, completions, and new and existing home sales exhibited slight increases. Overall permit data declined, and the decrease in starts was due primarily to a...

  15. United States housing, fourth quarter 2013

    Science.gov (United States)

    Delton Alderman

    2017-01-01

    In the beginning of 2013, the U.S. housing construction market indicated increases in all sectors; yet, by the fourth quarter’s end, only housing under construction improved. Moderation and declines are to be expected in the fourth quarter, as winter is setting in. Permits, starts, housing under construction, completions, and new and existing house sales all exceeded...

  16. Idaho National Laboratory Quarterly Occurrence Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-11-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 85 reportable events (18 from the 4th Qtr FY-15 and 67 from the prior three reporting quarters), as well as 25 other issue reports (including events found to be not reportable and Significant Category A and B conditions) identified at INL during the past 12 months (8 from this quarter and 17 from the prior three quarters).

  17. Comparative analysis of energy economy among different types of electric motor driving; Analise comparativa de economia de energia entre diferentes tipos de acionamento de motores electricos

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Marcelo Santos da; Oliveira, Carlos Henrique, e-mails: mcelo_sant@ig.com.br; caique1979@yahoo.com.br; Albuquerque, Carlos Jesivan Marques; Fortes, Marcio Zamboti [Universidade Severino Sombra (USS), Vassouras, RJ (Brazil)], e-mails: cjesivan@uss.br; mzamboti@uss.br

    2008-07-01

    The application of controlled drives loads of small power can cause undesirable disturbances for electrical installations, but it brings some benefits when comparing the energy consumption that this application has on its regular period of operation. This study analyses using comparatives, the electrical economy using the different types of drives for three phase electric induction motors of low voltage. Running up tests on the test bench didactic, the inverter drives, soft starter and contactor switch were analyzed for different loads (motor without load, 50% and 100% load), rating in S1 and S4. (author)

  18. Strategic Petroleum Reserve: Annual/quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-16

    Section 165 of the Energy Policy and Conservation Act (Public Law 94-163), as amended, requires the Secretary of Energy to submit annual and quarterly reports to the President and the Congress on activities of the Strategic Petroleum Reserve. This report combines the fourth quarter 1993 Quarterly Report with the 1993 Annual Report. Key activities described include appropriations; life extension planning; expansion planning; Strategic Petroleum Reserve oil acquisition; the oil stabilization program; and the refined petroleum product reserve test programs. Sections of this report also describe the program mission; the storage facility development program; environmental compliance; budget and finance; and drawdown and distribution.

  19. Econometric Methods within Romanian Quarterly National Accounts

    Directory of Open Access Journals (Sweden)

    Livia Marineta Drăguşin

    2013-04-01

    Full Text Available The aim of the present paper is to synthesise the main econometric methods (including the mathematical and statistical ones used in the Romanian Quarterly National Accounts compilation, irrespectively of Quarterly Gross Domestic Product (QGDP. These methods are adapted for a fast manner to operatively provide information about the country macroeconomic evolution to interested users. In this context, the mathematical and econometric methods play an important role in obtaining quarterly accounts valued in current prices and in constant prices, in seasonal adjustments and flash estimates of QGDP.

  20. Centurion Quarter-scale Prototype Pre-flight Taxi Test

    Science.gov (United States)

    1997-01-01

    As crewmen jog and cycle alongside, a battery-powered, quarter-scale prototype of the remotely-piloted Centurion flying wing rolls across the El Mirage Dry Lake during pre-flight taxi tests. Centurion was a unique remotely piloted, solar-powered airplane developed under NASA's Environmental Research Aircraft and Sensor (ERAST) Program at the Dryden Flight Research Center, Edwards, California. Dryden joined with AeroVironment, Inc., Monrovia, California, under an ERAST Joint Sponsored Research Agreement, to design, develop, manufacture, and conduct flight development tests for the Centurion. The airplane was believed to be the first aircraft designed to achieve sustained horizontal flight at altitudes of 90,000 to 100,000 feet. Achieving this capability would meet the ERAST goal of developing an ultrahigh-altitude airplane that could meet the needs of the science community to perform upper-atmosphere environmental data missions. Much of the technology leading to the Centurion was developed during the Pathfinder and Pathfinder-Plus projects. However, in the course of its development, the Centurion became a prototype technology demonstration aircraft designed to validate the technology for the Helios, a planned future high-altitude, solar-powered aircraft that could fly for weeks or months at a time on science or telecommunications missions. Centurion had 206-foot-long wings and used batteries to supply power to the craft's 14 electric motors and electronic systems. Centurion first flew at Dryden Nov. 10, 1998, and followed up with a second test flight Nov. 19. On its third and final flight on Dec. 3, the craft was aloft for 31 minutes and reached an altitude of about 400 feet. All three flights were conducted over a section of Rogers Dry Lake adjacent to Dryden. For its third flight, the Centurion carried a simulated payload of more than 600 pounds--almost half the lightweight aircraft's empty weight. John Del Frate, Dryden's project manager for solar

  1. Idaho National Laboratory Quarterly Occurrence Analysis 4th Quarter FY 2016

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-11-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System, as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 84 reportable events (29 from the 4th quarter fiscal year 2016 and 55 from the prior three reporting quarters), as well as 39 other issue reports (including events found to be not reportable and Significant Category A and B conditions) identified at INL during the past 12 months (two from this quarter and 37 from the prior three quarters).

  2. Idaho National Laboratory Quarterly Occurrence Analysis for the 1st Quarter FY2017

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 82 reportable events (13 from the 1st quarter (Qtr) of fiscal year (FY) 2017 and 68 from the prior three reporting quarters), as well as 31 other issue reports (including events found to be not reportable and Significant Category A and B conditions) identified at INL during the past 12 months (seven from this quarter and 24 from the prior three quarters).

  3. Quarterly Fishery Surveys - Salton Sea [ds428

    Data.gov (United States)

    California Department of Resources — In the spring of 2003, California Department of Fish and Game (CDFG) personnel began quarterly sampling of Salton Sea fish at fourteen stations around the sea, as...

  4. Rapid Estimates of Mexico's Quarterly GDP

    National Research Council Canada - National Science Library

    Víctor M Guerrero; Andrea C García; Esperanza Sainz

    2013-01-01

    .... The estimates consider historical GDP data up to the previous quarter as well as the most recent figures available for two relevant indices of Mexican economic activity and other potential predictors of GDP...

  5. Information Science Research Institute. Quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Nartker, T.A.

    1994-06-30

    This is a second quarter 1194 progress report on the UNLV Information Science Research Institute. Included is symposium activity; staff activity; document analysis program; text retrieval program; institute activity; and goals.

  6. Quarterly report: Division of Fishery Biology

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — During the winter quarter when active field work is normally at a minimum, the field staff of the Division, as shown by the following sectional reports, was...

  7. Quarterly Regional GDP Flash Estimates by Means of Benchmarking and Chain Linking

    Directory of Open Access Journals (Sweden)

    Cuevas Ángel

    2015-12-01

    Full Text Available In this article we propose a methodology for estimating the GDP of a country’s different regions, providing quarterly profiles for the annual official observed data. Thus the article offers a new instrument for short-term monitoring that allows the analysts to quantify the degree of synchronicity among regional business cycles. Technically, we combine time-series models with benchmarking methods to process short-term quarterly indicators and to estimate quarterly regional GDPs ensuring their temporal and transversal consistency with the National Accounts data. The methodology addresses the issue of nonadditivity, explicitly taking into account the transversal constraints imposed by the chain-linked volume indexes used by the National Accounts, and provides an efficient combination of structural as well as short-term information. The methodology is illustrated by an application to the Spanish economy, providing real-time quarterly GDP estimates, that is, with a minimum compilation delay with respect to the national quarterly GDP. The estimated quarterly data are used to assess the existence of cycles shared among the Spanish regions.

  8. Idaho National Laboratory Quarterly Occurrence Analysis - 3rd Quarter FY-2016

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 73 reportable events (23 from the 3rd Qtr FY-16 and 50 from the prior three reporting quarters), as well as 45 other issue reports (including events found to be not reportable and Significant Category A and B conditions) identified at INL during the past 12 months (16 from this quarter and 29 from the prior three quarters).

  9. Idaho National Laboratory Quarterly Occurrence Analysis - 1st Quarter FY 2016

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 74 reportable events (16 from the 1st Qtr FY-16 and 58 from the prior three reporting quarters), as well as 35 other issue reports (including events found to be not reportable and Significant Category A and B conditions) identified at INL during the past 12 months (15 from this quarter and 20 from the prior three quarters).

  10. Idaho National Laboratory Quarterly Performance Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-11-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 60 reportable events (23 from the 4th Qtr FY14 and 37 from the prior three reporting quarters) as well as 58 other issue reports (including not reportable events and Significant Category A and B conditions) identified at INL from July 2013 through October 2014. Battelle Energy Alliance (BEA) operates the INL under contract DE AC07 051D14517.

  11. ER Consolidated Quarterly Report October 2014

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, John R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-10-01

    This Environmental Restoration Operations (ER) Consolidated Quarterly Report (ER Quarterly Report) provides the status of ongoing corrective actions and related Long- Term Stewardship (LTS) activities being implemented by Sandia National Laboratories, New Mexico (SNL/NM) ER for the April, May, and June 2014 quarterly reporting period. Section 2.0 provides the status of ER Operations activities including closure activities for the Mixed Waste Landfill (MWL), project management and site closure, and hydrogeologic characterizations. Section 3.0 provides the status of LTS activities that relate to the Chemical Waste Landfill (CWL) and the associated Corrective Action Management Unit (CAMU). Section 4.0 provides the references noted in Section I of this report.

  12. Joint Force Quarterly. Issue 66, 3rd Quarter 2012

    Science.gov (United States)

    2012-07-01

    been spent on maintaining access to Middle East oil supplies.21 It is a cruel irony that in spite of this investment, persistent vulnerabilities...of war that cannot be deviated from without danger, while their application has been always crowned with success.28 He provides a list of four

  13. Environmental Biosciences Program Quarterly Report

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence C. Mohr, M.D.

    2009-01-30

    Current research projects have focused Environmental Biosciences Program (EBP) talent and resources on providing the scientific basis for risk-based standards, risk-based decision making and the accelerated clean-up of widespread environmental hazards. These hazards include trichloroethylene, low-dose ionizing radiation (gamma and neutron) and alpha radiation from plutonium. Trichloroethylene research has been conducted as a joint collaborative effort with the University of Georgia. Work on the trichloroethylene research projects has been slowed as a result of funding uncertainties. The impact of these funding uncertainties has been discussed with the United States Department of Energy (DOE). Laboratory work has been completed on several trichloroethylene risk assessment projects, and these projects have been brought to a close. Plans for restructuring the performance schedule of the remaining trichloroethylene projects have been submitted to the department. A comprehensive manuscript on the scientific basis of trichloroethylene risk assessment is in preparation. Work on the low-dose radiation risk assessment projects is also progressing at a slowed rate as a result of funding uncertainties. It has been necessary to restructure the proponency and performance schedule of these projects, with the project on Low-Dose Radiation: Epidemiology Risk Models transferred to DOE Office of Science proponency under a separate funding instrument. Research on this project will continue under the provisions of the DOE Office of Science funding instrument, with progress reported in accordance with the requirements of that funding instrument. Progress on that project will no longer be reported in quarterly reports for DE-FC09-02CH11109. Following a meeting at the Savannah River Site on May 8, 2008, a plan was submitted for development of an epidemiological cohort study and prospective medical surveillance system for the assessment of disease rates among workers at the Savannah River

  14. High Torque, Direct Drive Electric Motor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Bear Engineering proposes to advance the development of an innovative high torque, low speed, direct drive motor in order to meet NASA's requirements for such...

  15. Introduction to the Control of Electric Motors.

    Science.gov (United States)

    Spencer, Frederick

    The fundamentals of electric circuits and electric machines are presented in the text, with an emphasis on the practical operation rather than on mathematical analyses of theories involved. The material contained in the text includes the fundamentals of both D.C. and A.C. circuits together with the principles of magnetism and electro-magnetic…

  16. High Torque, Direct Drive Electric Motor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Bear Engineering proposes to develop an innovative high torque, low speed, direct drive motor in order to meet NASA's requirements for such devices. Fundamentally,...

  17. High-speed electrical motor evaluation

    Energy Technology Data Exchange (ETDEWEB)

    1989-02-03

    Under this task, MTI conducted a general review of state-of-the-art high-speed motors. The purpose of this review was to assess the operating parameters, limitations and performance of existing motor designs, and to establish commercial sources for a motor compatible with the requirements of the Brayton-cycle system. After the motor requirements were established, a list of motor types, manufacturers and designs capable of achieving the requisite performance was compiled. This list was based on an in-house evaluation of designs. Following the establishment of these options, a technical evaluation of the designs selected was conducted. In parallel with their evaluations, MTI focused on the establishment of commercial sources.

  18. Operation of Finnish nuclear power plants. Quarterly report, 4th quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1999-05-01

    Quarterly reports on the operation of Finnish NPPs describe events and observations relating to nuclear and radiation safety that the Finnish Radiation and Nuclear Safety Authority (STUK) considers safety significant. Safety improvements at the plants are also described. The report includes a summary of the radiation safety of plant personnel and the environment and tabulated data on the plants` production and load factors. All Finnish NPP units were in power operation for the fourth quarter of 1998, with the exception of the post-outage start-up phase of Loviisa 2 at the beginning of the quarter. In this quarter, the load factor average of the four plant units was 99.2%. One of this quarter`s events was classified Level 1 on the International Nuclear Event Scale (INES). It occurred at Olkiluoto 1 where the oxygen concentration of the containment slightly exceeded the allowable limit for four days. The other events in this quarter had no bearing on nuclear or radiation safety. Occupational doses and radioactive releases off-site were well below authorised limits. Radioactive substances were measurable in samples collected around the plant in such quantities only as have no bearing on the radiation exposure of the population. (orig.)

  19. Quarterly report for the electricity market. 2. quarter of 2012; Kvartalsrapport for kraftmarknaden. 2. kvartal 2012

    Energy Technology Data Exchange (ETDEWEB)

    Eliston, Anton Jaynand; Holmqvist, Erik; Lund, Per Tore Jensen; Magnussen, Ingrid; Viggen, Kjerstin Dahl; Willumsen, Mats Oeivind; Guren, Ingrid; Ulriksen, Margit Iren

    2012-07-01

    Fourth quarter of 2011 was unusually mild and wet, resulting in high energy inflow to the Norwegian reservoirs. Total inflow for the year was 149.2 TWh, 26.7 TWh more than normal. This ensured record-high 80.3 percent load factor at the end of the quarter.The stored energy amount in the reservoirs was thus 29.5 TWh greater than at the end of 2010/2011. Norway had a power consumption of 34.1 TWh in the fourth quarter. Compared with the same quarter of 2010, a decrease of 4.2 TWh, which can be connected to the mild weather development. The total Norwegian electricity consumption in 2011 was 125.1 TWh, or 6.9 TWh less than in 2010. Electricity production in the fourth quarter of 2011 was 38.3 GWh, an increase of 3.7 TWh from the same quarter the year before. The production increase were a result of the large volume of water in the system. Power production for the year 2011 was 128.1 TWh, an increase of 3.7 TWh from 2010. Kraft surplus was therefore large, and it was Norwegian net export of 4.2 TWh in the fourth quarter, and 3.0 TWh total for the year. In comparison, in the fourth quarter of 2010 Norwegian net import of 0.8 TWh and 7.5 TWh annually. The good resource combined with the low consumption gave a unusually low price levels in the wholesale market for electricity. On average for fourth quarter, the price of power in the East and South-East Norway Nok 264 / MWh, in western Norway Nok 260 / MWh, in Central Norway Nok 270 / MWh (eb)

  20. Quarterly report for the electricity market. 1. quarter of 2012; Kvartalsrapport for kraftmarknaden. 1. kvartal 2012

    Energy Technology Data Exchange (ETDEWEB)

    Pettersen, Finn Erik Ljaastad; Eliston, Anton Jaynanand; Guren, Ingri; Homqvist, Erik; Lund, Per Tore Jensen; Magnussen, Ingrid; Rasmussen, Kristian; Ulriksen, Margit Iren

    2012-07-01

    The first quarter of 2012 was unusually mild and wetter than normal. Total inflow was 16.8 TWh, 7.5 TWh more than normal. This ensured a high reservoir levels and at the end of the quarter the filling was 50.5 percent. It is 12.5 percentage points over the normal for the time of year and 32.4 percentage points higher than the same time last year. Norway had a power consumption of 37.5 TWh in the first quarter, which is 2.3 percent less than in the same quarter last year. the past 12 months, consumption has been 124.2 TWh, compared with 129.7 TWh the preceding 12 months. Power production in Norway was 42.3 TWh in the first quarter - an increase of 32.3 percent compared with the same quarter last year. The last 12 months have the Norwegian production been 138.5 TWh compared to 117.7 TWh the the previous 12 months. The production increase is due to milder and wetter weather than normal over the past year. This involvement also high the exports abroad. In the first quarter, Norway had a net export of 4.8 TWh, compared with a net import of 6.4 TWh in the first quarter last year. The good resource, combined with a low consumption gave a low price level in wholesale market for electricity. On average for the fourth quarter was the average spot price in the South and West Norway, Nok 272 and 275 / MWh. In Eastern Norway, the average price of Nok 283 / MWh, while it was Nok 285 / MWh in the Middle and Northern Norway. (Author)

  1. Quarterly report for the electricity market. 2. quarter of 2012; Kvartalsrapport for kraftmarknaden. 2. kvartal 2012

    Energy Technology Data Exchange (ETDEWEB)

    Pettersen, Finn Erik Ljaastad; Eliston, Anton Jayanand; Vaeringstad, Thomas; Lund, Per Tore Jensen; Magnussen, Ingrid; Langseth, Benedicte; Willumsen, Mats Oeivind; Rasmussen, Kristian; Guren, Ingri

    2012-07-01

    Second quarter of 2012 was cold. Total inflow was 47.0 TWh, 8.8 TWh less than normal. At the end of the quarter, the reservoir level 68.4 percent. It is 1.8 percentage points above normal for time of year and 1.2 percentage points higher than the same time last year. Norway had a power consumption of 28.2 TWh in the second quarter, which is 4.2 percent higher than in the same quarter last year. The last 12 months the consumption have been 125.7 TWh, compared with 128.7 TWh the preceding 12 months. The power production in Norway was 33.3 TWh in the second quarter - an increase of 26.1 percent compared with the same quarter last year. The last 12 months the Norwegian production has been 145.8 TWh, compared with 120.9 TWh the preceding 12 months. The production increase is due to that the last year has been much wetter than the preceding. This has also given high export abroad. In the second quarter Norway had a net export of 5.1 TWh, compared with a net import of 0.6 TWh in the second quarter last year. The good resource gave a low price level in the wholesale market for electricity. On average for the second quarter was the average spot price in West, Southwest and Eastern Norway, 201, 202 and 203 Nok / MWh. In Central and Northern Norway, the average price 218 and 213 Nok/ MWh. (eb)

  2. Quarterly Progress Report Fuels Development Operation October - December 1960

    Energy Technology Data Exchange (ETDEWEB)

    Cadwell, J. J. [Hanford Site (HNF), Richland, WA (United States); Tobin, J. C. [Hanford Site (HNF), Richland, WA (United States); Last, G. A. [Hanford Site (HNF), Richland, WA (United States); Evans, E. A. [Hanford Site (HNF), Richland, WA (United States); Minor, J. E. [Hanford Site (HNF), Richland, WA (United States)

    1961-01-13

    The present Quarterly Report is the continuation of a series issued by the new Fuels Development Operation. Reports in this series combine portions of the quarterly reports by the former Metallurgy Research and Fuel Technology Sub-Sections.

  3. ARM Operations Quarterly Report October 1-December 31, 2013

    Energy Technology Data Exchange (ETDEWEB)

    Voyles, Jimmy W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-12-31

    The U.S. Department of Energy requires national user facilities to report time-based operating data. This quarterly report is written to comply with this requirement. This reports on the first quarter facility statistics.

  4. Joint Force Quarterly. Number 5, Summer 1994

    Science.gov (United States)

    1994-07-01

    Editor The Typography and Design Division of the U.S. Government Printing Office is responsible for layout and art direction. Joint Force Quarterly is... menu of joint space force options whose stated purpose is to ensure overall U.S. space superiority. All the services look to the near future when space

  5. "The Career Development Quarterly": A Centennial Retrospective

    Science.gov (United States)

    Savickas, Mark L.; Pope, Mark; Niles, Spencer G.

    2011-01-01

    "The Career Development Quarterly" has been the premier journal in the field of vocational guidance and career intervention since its inception 100 years ago. To celebrate its centennial, 3 former editors trace its evolution from a modest and occasional newsletter to its current status as a major professional journal. They recount its history of…

  6. 77 FR 24505 - ACHP Quarterly Business Meeting

    Science.gov (United States)

    2012-04-24

    ... From the Federal Register Online via the Government Publishing Office ADVISORY COUNCIL ON HISTORIC PRESERVATION ACHP Quarterly Business Meeting AGENCY: Advisory Council on Historic Preservation. ACTION: Notice... Office Closures and Disposal IX. New Business X. Adjourn Note: The meetings of the ACHP are open to the...

  7. "Library Quarterly" Management Literature, 1931-2004

    Science.gov (United States)

    Young, Arthur P.

    2006-01-01

    Management literature appearing in "Library Quarterly," 1931-2004, is examined in this essay. A total of 145 articles are identified that focus on administrative and managerial issues related to libraries during this period. Management literature is construed expansively and includes accounting, administration, assessment, budgets, facilities,…

  8. 77 FR 3784 - ACHP Quarterly Business Meeting

    Science.gov (United States)

    2012-01-25

    ... From the Federal Register Online via the Government Publishing Office ADVISORY COUNCIL ON HISTORIC PRESERVATION ACHP Quarterly Business Meeting AGENCY: Advisory Council on Historic Preservation. ACTION: Notice... Implementation C. Bureau of Land Management Nationwide Programmatic Agreement VIII. New Business IX. Adjourn Note...

  9. Joint Force Quarterly. Issue 37

    Science.gov (United States)

    2005-04-01

    dysentery, cholera , and other diseases . Bridge, road, and other recon- struction projects numbered 1,758 during the first 18 weeks of CERP and put nearly...SJFHQ is a powerful, deploy- able joint command and control (DJC2) suite. Be- cause we will have a standardized, comprehensive suite of tools and...has his visa application from Yemen , the Immigration and Naturalization Ser- vice has his entry stamp in Los Angeles a month later, the Federal

  10. Operation of Finnish nuclear power plants. Quarterly report, 1st quarter 1999

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1999-10-01

    Quarterly reports on the operation of Finnish NPPs describe events and observations relating to nuclear and radiation safety that the Finnish Radiation and Nuclear Safety Authority (STUK) considers safety significant. Safety improvements at the plants are also described. The report includes a summary of the radiation safety of plant personnel and the environment and tabulated data on the plants' production and load factors. All Finnish NPP units were in power operation for the whole first quarter of 1999. In this quarter, the load factor average of the plant units was 100.8 %. The events in this quarter had no bearing on the nuclear or radiation safety of the plant units. The individual doses of NPP personnel and also radioactive releases off-site were well below authorised limits. Radioactive substances were measurable in samples collected around the plants in such quantities only as have no bearing on the radiation exposure of the population. (orig.)

  11. Rendimento de motor elétrico como parâmetro de dimensionamento de bitola de alimentador conectado diretamente ao transformador Electric motor efficiency as parameter for sizing a directly connected into transformer feeder cable

    Directory of Open Access Journals (Sweden)

    Delly Oliveira Filho

    2010-10-01

    Full Text Available O dimensionamento de condutores de energia elétrica não leva em consideração critérios de racionalização do uso de energia elétrica. O estudo abrangeu uma avaliação sobre o dimensionamento de condutores alimentadores de energia elétrica de motores conectados diretamente a transformadores utilizados na eletrificação rural. No dimensionamento dos condutores alimentadores, indica-se que, além do atendimento à norma técnica (dimensionamento em função da capacidade de corrente do condutor e da queda de tensão admissível, também sejam considerados: (i o número de horas de funcionamento; (ii as características elétricas e preço de condutores; (iii as características da instalação, como comprimento do ramal e potência do motor. Provou-se que, em algumas situações, é vantajoso aumentar a bitola do condutor além daquela exigida pela norma técnica, a fim de se economizarem energia e gastos pela menor perda no alimentador e maior rendimento do motor elétricoThe feeder conductors sizing does not take into account criterion for rational use of electricity. This study is about feeder conductors sizing evaluation for motors connected directly to transformers used in rural electrification. In the feeder conductors sizing indicate that besides the attendance of the technical standard (i.e. sizing as a function of the feeder current capacity and the allowable voltage drop is also to be considered: (i the number of working hours, (ii the feeder's electrical characteristic and price, (iii the installation characteristics as length and engine's rate. According to the above, in some situations it may be advantageous to increase the gauge of the conductor. It was proven that in some situations it is advantageous to increase the conductor gauge beyond that required by the standards in order to save energy and expenses by the lower feeder losses and by the electric motor higher efficiency

  12. Power And Propulsion Systems For Mobile Robotic Applications

    Science.gov (United States)

    Layuan, Li; Haiming, Zou

    1987-02-01

    Choosing the best power and propulsion systems for mobile robotic land vehicle applications requires consideration of technologies. The electric power requirements for onboard electronic and auxiliary equipment include 110/220 volt 60 Hz ac power as well as low voltage dc power. Weight and power are saved by either direct dc power distribution, or high frequency (20 kHz) ac power distribution. Vehicle control functions are performed electronically but steering, braking and traction power may be distributed electrically, mechanically or by fluid (hydraulic) means. Electric drive is practical, even for small vehicles, provided that advanced electric motors are used. Such electric motors have demonstrated power densities of 3.1 kilowatts per kilogram with devices in the 15 kilowatt range. Electric motors have a lower torque, but higher power density as compared to hydraulic or mechanical transmission systems. Power density being comparable, electric drives were selected to best meet the other requirements for robotic vehicles. Two robotic vehicle propulsion system designs are described to illustrate the implementation of electric drive over a vehicle size range of 250-7500 kilograms.

  13. Idaho National Laboratory Quarterly Performance Analysis for the 2nd Quarter FY 2015

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth A. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-04-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of events for the 2nd Qtr FY-15.

  14. Idaho National Laboratory Quarterly Performance Analysis - 3rd Quarter FY2014

    Energy Technology Data Exchange (ETDEWEB)

    Lisbeth A. Mitchell

    2014-09-01

    This report is published quarterly by the Idaho National Laboratory (INL) Performance Assurance Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of occurrence reports and other non-reportable issues identified at INL from July 2013 through June 2014.

  15. 10 CFR 34.69 - Records of quarterly inventory.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Records of quarterly inventory. 34.69 Section 34.69 Energy... INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.69 Records of quarterly inventory. (a) Each licensee shall maintain records of the quarterly inventory of sealed sources and of devices...

  16. 78 FR 59093 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2013-09-25

    ... RCAF Unadjusted (0.975) by the fourth quarter productivity adjustment factor-5 (PAF-5) of 2.4426. The fourth quarter 2013 PAF-5 is calculated by multiplying the third quarter 2013 PAF-5 of 2.4377 by the...

  17. Natural gas imports and exports. Second quarter report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The Office of Natural Gas and Petroleum Import and Export Activities prepares quarterly reports summarizing the data provided by companies authorized to import or export natural gas. Companies are required, as a condition of their authorizations, to file quarterly reports. This report is for the second quarter of 1997 (April through June).

  18. Weldon Spring Site Remedial Action Project quarterly environmental data summary for second quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-08-11

    In support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement, a copy of the Quarterly Environmental Data Summary (QEDS) for the second quarter of 1998 is enclosed. The data presented constitutes the QEDS. The data were received from the contract laboratories, verified by the Weldon Spring Site verification group and, except for air monitoring data and site KPA generated data (uranium analyses), merged into the database during the second quarter of 1998. Air monitoring data presented are the most recent complete sets of quarterly data. Air data are not stored in the database and KPA data are not merged into the regular database. All data received and verified during the second quarter were within a permissible range of variability, except for those listed. Above normal occurrences are cited for groundwater, air, and NPDES data. There were no above normal occurrences for springs or surface water. The attached tables present the most recent data for air and the data merged into the database during the second quarter 1998 for groundwater, NPDES, surface water, and springs.

  19. Operation of Finnish nuclear power plants. Quarterly report, 3rd quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1999-04-01

    Quarterly reports on the operation of Finnish NPPs describe events and observations relating to nuclear and radiation safety that the Finnish Radiation and Nuclear Safety Authority (STUK) considers safety significant. Safety improvements at the plants are also described. The report includes a summary of the radiation safety of plant personnel and the environment and tabulated data on the plants` production and load factors. All Finnish NPP units were in power operation for the third quarter of 1998, with the exception of the annual maintenance outages of the Loviisa plant units. In this quarter, the load factor average of the four plant units was 78.7%. One of this quarter`s events was classified Level 1 on the International Nuclear Event Scale (INES). It occurred towards the end of the Loviisa 1 annual maintenance outage when the primary circuit boron concentration went below the limit given in the Technical Specifications. Other events in this quarter had no bearing on nuclear or radiation safety. Occupational doses and radioactive releases off-site were well below authorised limits. Radioactive substances were measurable in samples collected around the plant in such quantities only as have no bearing on the radiation exposure of the population. (orig.)

  20. Board Of Visitors Holds Quarterly Meeting

    OpenAIRE

    Hincker, Lawrence

    2003-01-01

    At its quarterly meeting today, the Virginia Tech Board of Visitors approved creation of a new M.A. in Communication in the College of Liberal Arts and Human Sciences. The new degree program spins off from the popular graduate option in the Department of English. The new program will offer students advanced study in public and mass communication research. The 36-hour program is expected to enroll 12-16 students annually.

  1. A Walk around Irkutsk’s Quarters

    Directory of Open Access Journals (Sweden)

    Elena Grigoryeva

    2016-10-01

    Full Text Available The article presents the key issues of the Concept of reconstruction of the 11 Irkutsk’s quarters adjacent to the Trading Axis. While remaining basic, the trading function should reduce its overwhelming domination to be in harmony with other functions of the city environment, which attract inhabitants and guests to the historical area of Irkutsk, that is culture, education, leisure, recreation, and housing.

  2. NEAMS Update. Quarterly Report for January - March 2014

    Energy Technology Data Exchange (ETDEWEB)

    Stan, Marius [Argonne National Lab. (ANL), Argonne, IL (United States)

    2014-08-01

    This quarterly report covers the following points: A fully three-dimensional smeared cracking model has been implemented and tested in BISON; DAKOTA-BISON was used to study the parameters that govern heat transfer across the fuel-cladding; Calculations of grain boundary mobility in UO2 have been extended to high temperatures; Mesh adaptivity is being employed in MARMOT simulations to increase computational efficiency; Molecular dynamics simulations have shown correlation between atomic displacements and the anisotropic thermal conductivity in UO2; The SHARP team continues to address the application of the toolkit to assembly deformations driven by reactivity feedback; The Nek5000 team has extended the low-Machnumber capability to mixtures with multiple species; The generalized cross section library has been tested for various fuel assemblies and reactor types; and The subgroup cross-section interface was successfully implemented in PROTEUS-SN (page 6).

  3. Idaho National Laboratory Quarterly Performance Analysis - 1st Quarter FY2015

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth A. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-03-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 73 reportable events (27 from the 1St Qtr FY-15 and 46 from the prior three reporting quarters), as well as 38 other issue reports (including nine not reportable events and Significant Category A and B conditions reported during the1st Qtr FY-15) identified at INL during the past 12 months.

  4. Idaho National Laboratory Quarterly Event Performance Analysis FY 2013 4th Quarter

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth A. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-11-01

    This report is published quarterly by the Idaho National Laboratory (INL) Performance Assurance Organization. The Department of Energy Occurrence Reporting and Processing System (ORPS) as prescribed in DOE Order 232.2 “Occurrence Reporting and Processing of Operations Information” requires a quarterly analysis of events, both reportable and not reportable for the previous twelve months. This report is the analysis of occurrence reports and deficiency reports (including not reportable events) identified at the Idaho National Laboratory (INL) during the period of October 2012 through September 2013.

  5. Idaho National Laboratory Quarterly Performance Analysis - 2nd Quarter FY2014

    Energy Technology Data Exchange (ETDEWEB)

    Lisbeth A. Mitchell

    2014-06-01

    This report is published quarterly by the Idaho National Laboratory (INL) Performance Assurance Organization. The Department of Energy Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of occurrence reports and other deficiency reports (including not reportable events) identified at INL from January 2014 through March 2014.

  6. Tribopolymerization as an anti-wear mechanism. Quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Furey, M.J.

    1996-04-01

    The primary objective of this activity is to obtain the necessary data which would enhance, promote, and encourage the introduction of advanced lubrication technology into the marketplace. This includes (a) defining specific but different applications, (b) establishing the limits or ranges of applied loads, speeds, and temperatures over which the concept of tribopolymerization would work in reducing wear and/or friction, (c) continuing in efforts to understand the film-forming process (this rates to (b) above), using this knowledge to develop new and even more effective additives, and (d) exploring possible connections with private and investment companies for the licensing and marketing of products which will reduce friction and wear in a variety of applications. Progress was made in several different but connected areas. These included (a) establishing of load/velocity limits of selected monomers for ceramic lubrication, (b) the discovery of new and effective monomers designed for higher temperature anti-wear applications, (c) improvements and modifications of the high load/high speed pin-on-disk machine, (d) the initiation of related or spin-off projects designed to get their advanced technology into the marketplace, (e) the filing of three new patent applications, and (f) collaborative research with Dr. Kajdas--the co-inventor with Dr. Furey--on tribopolymerization as a novel and effective approach to the boundary lubrication of ceramics and steel. These and other elements of progress made during the first Quarter of 1996 are discussed briefly.

  7. The WSTIAC Quarterly. Volume 9, Number 4

    Science.gov (United States)

    2010-04-28

    elements of command– Major Eric D. Trias Captain Bryan M. Bell US Air Force You have to know the past to understand the present. — Carl Sagan This article is...Quarterly, Volume 9, Number 4 3 INTRODUCTION Carl von Clausewitz defined war as “…an act of violence intended to compel our opponent to fulfill our will...controlled systems. NOTES & REFERENCES ‡ Joint Pub 3-13 provides the doctrinal foundation for the conduct of IO in joint operations. [1] von Clausewitz, Carl

  8. Quarterly coal report, July--September 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-18

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. The data presented in the QCR are collected and published by the Energy Information Administration (EIA) to fulfill data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275), as amended.

  9. Enzymatic desulfurization of coal: Third quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    Marquis, Judith K. [School of Medicine, Boston Univ., MA (United States); Kitchell, Judith P. [Holometrix, Inc., Cambridge, Massachusetts (United States)

    1989-03-14

    Our current efforts to develop clean coal technology emphasize the advantages of enzymatic desulfurization techniques and have specifically addressed the potential of using partially-purified extracellular microbial enzymes or commercially available enzymes. Our work is focused on the treatment of ''model'' organic sulfur compounds such as dibenzothiophene (DBT) and ethylphenylsulfide (EPS). Furthermore, we are designing experiments to facilitate the enzymatic process by means of a hydrated organic solvent matrix. In this quarter we obtained important results both with the development of our understanding of the enzyme reaction systems and also with the microbial work at Woods Hole. 12 figs., 11 tabs.

  10. Natural gas imports and exports: First quarter report 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The Office of Fuels Programs prepares quarterly reports summarizing the data provided by companies authorized to import or export natural gas. Companies are required, as a condition of their authorizations, to file quarterly reports with the OFP. This quarter`s focus is market penetration of gas imports into New England. Attachments show the following: % takes to maximum firm contract levels and weighted average per unit price for the long-term importers, volumes and prices of gas purchased by long-term importers and exporters, volumes and prices for gas imported on short-term or spot market basis, and gas exported short-term to Canada and Mexico.

  11. Operation of Finnish nuclear power plants. Quarterly report, 2nd quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1999-01-01

    Quarterly reports on the operation of Finnish NPPs describe events and observations relating to nuclear and radiation safety that the Radiation and Nuclear Safety Authority (STUK) considers safety significant. Safety improvements at the plants are also described. The report includes a summary of the radiation safety of plant personnel and the environment and tabulated data on the plants` production and load factors. The Loviisa plant units were in power operation for the whole second quarter of 1998. The Olkiluoto units discontinued electricity generation for annual maintenance and also briefly for tests pertaining to the power upratings of the units. In addition, there were breaks in power generation at Olkiluoto 2 due to a low electricity demand in Midsummer and turbine balancing. The Olkiluoto units were in power operation in this quarter with the exception of the aforementioned breaks. The load factor average of the four plant units was 87.7%. The events in this quarter had no bearing on the nuclear or radiation safety. Occupational doses and radioactive releases off-site were below authorised limits. Radioactive substances were measurable in samples collected around the plants in such quantities only as have no bearing on the radiation exposure of the population. (orig.)

  12. Operation of Finnish nuclear power plants. Quarterly report, 1st quarter 1997

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1997-09-01

    Quarterly Reports on the operation of Finnish nuclear power plants describe events and observations relating to nuclear and radiation safety which the Radiation and Nuclear Safety Authority (STUK) considers safety significant. Safety improvements at the plants are also described. The report also includes a summary of the radiation safety of plant personnel and of the environment and tabulated data on the plants` production and load factors. The Finnish nuclear power plant units were in power operation for the whole first quarter of 1997, except for a brief shutdown of Loviisa 2 to repair a primary circuit leak. The load factor average of all plant units was 99.9 %. Long-term test operation of the Loviisa plant units at 103 % upgraded reactor power level was started. One event in the first quarter of 1997 was classified level 1 on the International Nuclear Event Scale (INES). The event in question was a minor primary circuit leak through the welded seam of a drainage pipe of one loop at Loviisa 2. Other events in this quarter were level 0 on the INES Scale. Occupational doses and radioactive releases off-site were below authorised limits. Radioactive substances were measurable in samples collected around the plants in such quantities only as have no bearing on the radiation exposure of the population. (orig.).

  13. Operation of Finnish nuclear power plants. Quarterly report, 3rd quarter 1997

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1998-04-01

    Quarterly reports on the operation of Finnish nuclear power plants describe events and observations relating to nuclear and radiation safety that the Radiation and Nuclear Safety Authority of Finland (STUK) considers safety significant. Safety improvements at the plants are also described. The Report also includes a summary of the radiation safety of plant personnel and of the environment and tabulated data on the plants` production and load factors. The Finnish nuclear power plant units were in power operation in the third quarter of 1997, except for the annual maintenance outages of Loviisa plant units which lasted well over a month in all. There was also a brief interruption in electricity generation at Olkiluoto 1 for repairs and at Olkiluoto 2 due to a disturbance at the turbine plant. All plant units were in long-term test operation at upgraded reactor power level approved by STUK. The load factor average of all plant units was 87.6 %. One event in the third quarter was classified level 1 on the International Nuclear Event Scale (INES). It was noted at Loviisa 2 that one of four pressurized water tanks in the plant unit`s emergency cooling system had been inoperable for a year. Other events in this quarter were INES level 0. Occupational doses and radioactive releases off-site were below authorized limits. Radioactive substances were measurable in samples collected around the plants in such quantities only as have no bearing on the radiation exposure of the population. (orig.).

  14. Operation of Finnish nuclear power plants. Quarterly report, 2nd quarter 1997

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1997-12-01

    Quarterly Reports on the operation of Finnish nuclear power plants describe events and observations relating to nuclear and radiation safety which STUK - Radiation and Nuclear Safety Authority considers safety significant. Safety improvements at the plants are also described. The Report also includes a summary of the radiation safety of plant personnel and of the environment and tabulated data on the plants` production and load factors. The Finnish nuclear power plant units were in power operation in the second quarter of 1997, except for the annual maintenance outages of Olkiluoto plant units and the Midsummer outage at Olkiluoto 2 due to reduced demand for electricity. There were also brief interruptions in power operation at the Olkiluoto plant units due to three reactor scrams. All plant units are undergoing long-term test operation at upgraded reactor power level which has been approved by STUK The load factor average of all plant units was 88.7 %. One event in the second quarter of 1997 was classified level 1 on the INES. The event in question was a scram at Olkiluoto 1 which was caused by erroneous opening of switches. Other events in this quarter were level 0. Occupational doses and radioactive releases off-site were below authorized limits. Radioactive substances were measurable in samples collected around the plants in such quantities only as have no bearing on the radiation exposure of the population. (orig.).

  15. Operation of Finnish nuclear power plants. Quarterly report, 2nd quarter 1999

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1999-12-01

    Quarterly reports on the operation of Finnish NPPs describe events and observations relating to nuclear and radiation safety that the Finnish Radiation and Nuclear Safety Authority (STUK) considers safety significant. Safety improvements at the plants are also described. The report includes a summary of the radiation safety of plant personnel and the environment and tabulated data on the plants' production and load factors. All Finnish NPP units were in power operation for the whole second quarter of 1999, with the exception of the annual maintenance outages of the Olkiluoto plant units. The load factor average of the plant units in this quarter was 93.1%. Two events in this quarter were classified Level 1 on the INKS Scale. At Olkiluoto 1, a valve of the containment gas treatment system had been in an incorrect position for almost a month, owing to which the system would not have been available as planned in an accident. At Olkiluoto 2, main circulation pump work was done during the annual maintenance outage and a containment personnel air lock was briefly open in violation of the Technical Specifications. Water leaking out of the reactor in an accident could not have been directed to the emergency cooling system because it would have leaked out from the containment via the open personnel air lock. Other events in this quarter had no bearing on the nuclear or radiation safety of the plant units. The individual doses of NPP personnel and also radioactive releases off-site were well below authorised limits. Radioactive substances were measurable in samples collected around the plants in such quantities only as have no bearing on the radiation exposure of the population. (orig.)

  16. Naturally fractured tight gas reservoir detection optimization. Quarterly report, January 1, 1997--March 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    This document contains the quarterly report dated January 1-March 31, 1997 for the Naturally Fractured Tight Gas Reservoir Detection Optimization project. Topics covered in this report include AVOA modeling using paraxial ray tracing, AVOA modeling for gas- and water-filled fractures, 3-D and 3-C processing, and technology transfer material. Several presentations from a Geophysical Applications Workshop workbook, workshop schedule, and list of workshop attendees are also included.

  17. Geothermal direct-heat utilization assistance. Quarterly project progress report, July 1994--September 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-01

    This paper is a third quarter 1994 report of activities of the Geo-Heat Center of Oregon Institute of Technology. It describes contacts with parties during this period related to assistance with geothermal direct heat applications. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, resources, and equipment. Research is also being conducted on failures of vertical lineshaft turbines in geothermal wells.

  18. Stability of a Perforated Quarter Circle Breakwater

    Directory of Open Access Journals (Sweden)

    ArkalVittal Hegde

    2015-12-01

    Full Text Available Many new types of breakwaters have been constructed of lateto fulfill the ever increasing demand of marine traffic. The quarter circle breakwater (QBW is a recent type of breakwater developed on the lines of an earlier semicircular breakwater (SBW. QBW may be without perforations, seaside perforated or both sides perforated. A series of laboratory experiments were conducted in a two dimensional monochromatic wave flume on an emerged seaside perforated non-overtopping quarter circle breakwater model to study its stability against sliding. The scale of the model was 1:30. A range of incident wave heights (Hi and wave periods (T were generated in the flume simulating the wave climate off Mangaluru coast in the Karnataka State of India. The experimental data so collected was analyzed to understand the variation of the non-dimensional stability parameter with incident wave steepness for different values of dimensionless depth parameter In the end a nomogram was developed for computing the sliding stability of the breakwater.

  19. Black shale studies in Kentucky. Quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    1978-09-01

    Work during the quarter was devoted to final interpretation, integration, and compilation of surface stratigraphic and petrologic data into deliverable documents for DOE, MERC. As of September, two such documents have been prepared. A thesis on black-shale outcrop stratigraphy from the two eastern Kentucky outcrop belts has been completed and will be included with the annual report and a thesis on the thin-section petrology of three eastern Kentucky cores has also been completed and will be included with the annual report. Also during this quarter the transition to two new parts of the project was started including map compilation and a paleontological--paleoecological study. Compilation of isopach, lithofacies, and structural contour maps depends largely on completion of the well-log inventory from which all the data are generated. At present, well-log inventories for 37 of the 41 eastern Kentucky counties (90%) have been completed. Work has begun, however, on compiling data from the completed county inventories. Work has also begun on the paleontological--paleoecological portion of the project. A research assistant has been found to complete a thesis study on this part of the project and he is currently engaged in preliminary research.

  20. Review of a Proposed Quarterly Coal Publication

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This Review of a Proposed Quartery Coal Publication contains findings and recommendations regarding the content of a new summary Energy Information Administration (EIA) coal and coke publication entitled The Quarterly Coal Review (QCR). It is divided into five sections: results of interviews with selected EIA data users; identification of major functions of the coal and coke industries; analysis of coal and coke data collection activities; evaluation of issues conerning data presentation including recommendations for the content of the proposed QCR; and comparison of the proposed QCR with other EIA publications. Major findings and recommendations are as follows: (1) User interviews indicate a definite need for a compehensive publication that would support analyses and examine economic, supply and demand trends in the coal industry; (2) the organization of the publication should reflect the natural order of activities of the coal and coke industries. Based on an analysis of the industries, these functions are: production, stocks, imports, exports, distribution, and consumption; (3) current EIA coal and coke surveys collect sufficient data to provide a summary of the coal and coke industries on a quarterly basis; (4) coal and coke data should be presented separately. Coke data could be presented as an appendix; (5) three geographic aggregations are recommended in the QCR. These are: US total, coal producing districts, and state; (6) coal consumption data should be consolidated into four major consumer categories: electric utilities, coke plants, other industrial, and residential commercial; (7) several EIA publications could be eliminated by the proposed QCR.

  1. Quarterly Technical Progress Report June 2015

    Energy Technology Data Exchange (ETDEWEB)

    Buchholz, Bruce A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-06-08

    The project has two main goals: 1) Identify the types of adducts naphthalene (NA) forms with DNA and 2) determine whether adduct formation correlates with site selective tumor formation in defined subcompartments of the respiratory tract (respiratory and olfactory nasal epithelium and airways of mice, rats and rhesus monkeys). Five tasks are associated with the completion of the goals. Task 1: Contracting and Animal Use Approvals. IACUC and ACURO approvals are complete, The subcontract with UC Davis (UCD) was executed in December 2014. Task 2: Perform In Vitro Study for Goal 1. Rat samples exposed and in freezer while adduct standards are being made. Mouse samples need to be exposed in next quarter. Task 3: Perform In Vitro Study for Goal 2. Mouse ex vivo samples completed. Rat and monkey samples need to be completed in the next quarter. Task 4: Sample Preparation and Analysis. Mouse Goal 2 samples completed. Other samples remain to be done. Task 5: Data Interpretation and Reporting. Need rat data to write paper on adduct formation.

  2. Advanced turbine systems program conceptual design and product development. Quarterly report, February 1995--April 1995

    Energy Technology Data Exchange (ETDEWEB)

    Karstensen, K.W.

    1995-07-01

    This Quarterly Technical Progress Report covers the period February 1, 1995, through April 30, 1995, for Phase II of the Advanced Turbine Systems (ATS) Program by Solar Turbines Incorporated under DOE contract No. DE-AC21-93MC30246. The objective of Phase II of the ATS Program is to provide the conceptual design and product development plan for an ultra high efficiency, environmentally superior and cost competitive industrial gas turbine system to be commercialized by the year 2000. A secondary objective is to begin early development of technologies critical to the success of ATS. Tasks 1, 2, 3, 5, 6 and 7 of Phase II have been completed in prior quarters. Their results have been discussed in the applicable quarterly reports and in their respective topical reports. With the exception of Task 7, final editions of these topical reports have been submitted to the DOE. This quarterly report, then, addresses only Task 4 and the nine subtasks included in Task 8, {open_quotes}Design and Test of Critical Components.{close_quotes} These nine subtasks address six ATS technologies as follows: (1) Catalytic Combustion - Subtasks 8.2 and 8.5, (2) Recuperator - Subtasks 8.1 and 8.7, (3) Autothermal Fuel Reformer - Subtask 8.3, (4) High Temperature Turbine Disc - Subtask 8.4, (5) Advanced Control System (MMI) - Subtask 8.6, and (6) Ceramic Materials - Subtasks 8.8 and 8.9. Major technological achievements from Task 8 efforts during the quarter are as follows: (1) The subscale catalytic combustion rig in Subtask 8.2 is operating consistently at 3 ppmv of NO{sub x} over a range of ATS operating conditions. (2) The spray cast process used to produce the rim section of the high temperature turbine disc of Subtask 8.4 offers additional and unplanned spin-off opportunities for low cost manufacture of certain gas turbine parts.

  3. Success and Challenge of Girls' Living Quarters: the Case of ...

    African Journals Online (AJOL)

    Thus, it is advisable that for better functioning of the living quarters the woreda education officers and other concerned bodies should strive to help the living quarters have independent administration, provide food services for the students, provide adequate, relevant and need based vocational trainings, and avail necessary ...

  4. Quarter Dates Location(s) Purpose Transportation and Travel ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Chantal Taylor

    Accommodation, Meals and Other. Hospitality. Total Expenses. Quarter 1. April 4 to 12. Alexandria, Egypt. Meetings. 15,761.81. 4,596.60. 77.24. 20,435.65. May 22. Toronto, ON. Meeting. May 23 to June 5. Jakarta, Bangkok and Delhi. Meetings. Quarter 2. September 22 to 26. New York, NY. Conference. 615.96. 342.89.

  5. Residential Group Care Quarterly. Volume 7, Number 2, Fall 2006

    Science.gov (United States)

    Ruby, Kathy, Ed.

    2006-01-01

    "Residential Group Care Quarterly" is published four times a year by the Child Welfare League of America (CWLA). This issue of "Residential Group Care Quarterly" contains the following articles: (1) Whatever Happened to Sound Clinical Reasoning? (Elizabeth Kohlstaedt); (2) Minorities as Majority Disproportionality in Child…

  6. 78 FR 78508 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2013-12-26

    ...-5 (PAF-5) of 2.4480. The first quarter 2014 PAF-5 is calculated by multiplying the fourth quarter 2013 PAF-5 of 2.4426 by the fourth root (1.0022) of the 2007-2011 annual average productivity growth...

  7. Quarterly Financial Report for the period ending 30 June 2013

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    2013-06-30

    Jun 30, 2013 ... International Accounting Standard 34, Interim Financial Reporting and the Standard on. Quarterly Financial Reports for Crown Corporations as issued by the Treasury Board of. Canada. Management has implemented internal controls that aim to keep condensed quarterly financial statements free from ...

  8. Fuels Development Operation. Quarterly progress report, July, August, September, 1959

    Energy Technology Data Exchange (ETDEWEB)

    1959-10-15

    The present quarterly report is the continuation of a series issued by the new Fuels Development Operation. Reports in this series combine portions of the quarterly reports by the former Metallurgy Research and Fuel Technology Sub-Sections. Work reported includes research conducted by the Physical Metallurgy Operation, and research and development conducted by Fuel Design, Fuels Fabrication Development and Ceramic Fuels Development Operations.

  9. Girls' Living Quarters: Success and Challenge, the Case of ...

    African Journals Online (AJOL)

    user

    students or others cannot enter in to the campus, coming late (after 1o'clock) is forbidden etc. These all helped them to be secured in the hostel. This result shows the living quarters solve one of the serious worries of the parents that is, their daughters security. Moreover, the custodians of each living quarters mention during ...

  10. 32 CFR 584.7 - Basic allowance for quarters.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Basic allowance for quarters. 584.7 Section 584.7... CUSTODY, AND PATERNITY § 584.7 Basic allowance for quarters. (a) Eligibility. (1) Soldiers entitled to... dependents” under certain conditions. The Department of Defense Military Pay and Allowances Entitlements...

  11. 77 FR 51705 - Rescission of Quarterly Financial Reporting Requirements

    Science.gov (United States)

    2012-08-27

    ... Financial Reporting Requirements AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION... the quarterly financial reporting requirements for certain for-hire motor carriers of property (Form... notice of proposed rulemaking in the near future proposing the elimination of the quarterly financial...

  12. 78 FR 76241 - Rescission of Quarterly Financial Reporting Requirements

    Science.gov (United States)

    2013-12-17

    ... Rescission of Quarterly Financial Reporting Requirements AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Final rule. SUMMARY: FMCSA eliminates the quarterly financial reporting... financial reporting requirements for certain for-hire motor carriers of property and for-hire motor carriers...

  13. Quarterly Financial Report for the period ending 31 December 2017

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    2017-12-31

    Dec 31, 2017 ... QUARTERLY FINANCIAL REPORT FOR THE PERIOD 1 APRIL TO 31 DECEMBER 2017 | 1. Contents. Introduction to the Quarterly Financial Report. 3. Management's Discussion and Analysis. 5. Financial highlights. 5. Management highlights. 5. Corporate developments. 5. Risk management. 6.

  14. Public Land Survey System (PLSS) Quarter Section Polygons, Arizona, 2014, Bureau of Land Management

    Data.gov (United States)

    U.S. Environmental Protection Agency — The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this...

  15. Public Land Survey System (PLSS) Quarter Section Polygons, Nevada, 2015, Bureau of Land Management

    Data.gov (United States)

    U.S. Environmental Protection Agency — The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this...

  16. Investors’ response on the deviation between quarterly and annual earnings

    Directory of Open Access Journals (Sweden)

    Saidin Saidatunur Fauzi

    2017-01-01

    Full Text Available Despite the benefits of timely information, concerns have been raised on the reliability of the quarterly accounts. The occurrence of deviation between audited annual accounts and cumulative quarterly accounts indicates the misstatements in the latter. This study examines investors’ response towards the occurrence of the deviation. Data is based on 792 listed companies of Bursa Malaysia in 2012. The results of the OLS regression show that the companies without earnings deviation have significantly higher earnings response coefficient than companies experiencing earnings deviation. It is also found that understated quarterly earnings companies have higher earnings response coefficient than overstated companies. Results imply that investors place higher reliability on the quarterly accounts produced by companies without earnings deviation. Higher reliability is placed on the understated quarterly earnings companies as compared to overstated companies. Findings suggest that investors do value the occurrence and types of earnings deviation. Therefore, steps should be taken to overcome the occurrence of deviation.

  17. Enthalpy and phase behavior of coal derived liquid mixtures. Ninth quarterly technical progress report, July-September 1986

    Energy Technology Data Exchange (ETDEWEB)

    Yesavage, V.F.; Kidnay, A.J.

    1986-10-31

    On July 15, 1984, work was initiated on a program to study the enthalpy and phase behavior of coal derived liquid moedl compound mixtures. During the ninth quarter, enthalpy measurements on the pure component 1-methylnaphthalene were obtained. Also, during this quarter ternary vapor liquid equilibrium measurements for m-cresol/quinoline/tetralin have begun for the isotherms; 250, 275, 300, 325/sup 0/C. A maximum likelihood algorithm applicable for implicit constraints has been developed. The method was applied to the determination of interaction parameters for temperature and density dependent mixing rules from our binary vapor liquid equilibrium data. 16 refs., 51 figs., 14 tabs.

  18. Geothermal direct-heat utilization assistance. Federal Assistance Program, Quarterly project progress report, October--December 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-31

    The report summarizes activities of the Geo-Heat Center (GHC) at Oregon Institute of Technology for the first quarter of Fiscal Year 1995. It describes contacts with parties during this period related to assistance with geothermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, resources and equipment. Research is also being conducted on geothermal energy cost evaluation, low-temperature geothermal resource assessment, use of silica waste from the Cerro Prieto geothermal field as construction materials and geothermal heat pumps. Outreach activities include the publication of a quarterly Bulletin on direct heat applications and dissemination of information on low-temperature geothermal resources and utilization.

  19. Cardiology update 2017: The first quarter

    Directory of Open Access Journals (Sweden)

    Sridharan Umapathy

    2017-01-01

    Full Text Available In the first quarter of 2017, proprotein convertase subtilisin/kexin type 9's role got defined further with a number of trials such as FOURIER, ORION-1, and SPIRE 1 and 2. TAVI proves safe in intermediate-risk patients in the Surgical Replacement and Transcatheter Aortic Valve Implantation study. Newer anticoagulants extended their role to valvular heart disease. Bioabsorbable stent showed problems (ABSORB 2 and 3. New guidelines have been released for syncope and transcatheter aortic valve replacement implantation. Clinical outcome studies involving instantaneous wave-free ratio (IFR showed IFR to be noninferior to fractional flow reserve. Optimal medical therapy proves noninferior to percutaneous coronary intervention in single vessel chronic total occlusion.

  20. A Peripatetic Promenade Around a Debatable Quarter: Analysis of Urbanship in Irkutsk’s Quarter

    Directory of Open Access Journals (Sweden)

    Konstantin Lidin

    2015-08-01

    Full Text Available The 130 Quarter in Irkutsk was rebuilt more than seven years ago. Since then it has been constantly debated. The article demonstrates the results of the analysis of the Quarter’s environment with the help of two original methods. Comments made by guests of the Quarter were examined by using the frequency content analysis method. The Quarter’s environment was studied by using the key visual shot method. The author reveals the reasons why the Quarter’s environment attracts Irkutsk citizens and guests of the city. The directions of the Quarter’s development as an environmental and economically self-sufficient entity are also presented in the article.

  1. Operation of Finnish nuclear power plants. Quarterly report, 4th quarter 1997

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1998-10-01

    Quarterly reports on the operation of Finnish NPPs describe events and observations relating to nuclear and radiation safety that the Nuclear and Radiation Safety Authority (STUK) considers safety significant. Safety upgrades at the plants are also described. The report includes a summary of the radiation safety of plant personnel and the environment and tabulated data on the plants` production and load factors. In the fourth quarter of 1997 the Finnish NPP units were in power operation, except for two 24-hour shutdowns of Olkiluoto-1 to repair turbine plant heat exchangers. All plant units were in long-term test operation at uprated power level approved by STUK. The load factor average of all plant units was 100.9%. The annual load factor average in 1997 was 93.7%. One event in the fourth quarter was classified level 1 in the International Nuclear Event Scale (INES). During the event in question it was detected in November that a total of seven valve actuators of the auxiliary service water circuits of both Loviisa plant units were incorrectly adjusted. The adjustments had not been checked after piping work that had been carried out in the annual maintenance outages that ended in September. The other events in the quarter were INES level 0. Of the NPP events in 1997, four were classified INES level 1. The other events were level 0 on the INES. Occupational doses and radioactive releases off-site were below authorized limits. Radioactive substances were measurable in samples collected around the plants in such quantities only as have no bearing on the radiation exposure of the population. (orig.)

  2. Operation of Finnish nuclear power plants. Quarterly report 3rd quarter, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1995-03-01

    Quarterly Reports on the operation of Finnish nuclear power plants describe nuclear and radiation safety related events and observations which the Finnish Centre for Radiation and Nuclear Safety (STUK) considers safety significant. Safety improvements at the plants and general matters relating to the use of nuclear energy are also reported. A summary of the radiation safety of plant personnel and of the environment, and tabulated data on the plants` production and load factors are also given. (4 figs., 4 tabs.).

  3. Operation of Finnish nuclear power plants. Quarterly report, 1st quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1998-11-01

    Quarterly reports on the operation of Finnish NPPs describe events and observations relating to nuclear and radiation safety that the Radiation and Nuclear Safety Authority (STUK) considers safety significant. Safety improvements at the plants are also described. The report includes a summary of the radiation safety of plant personnel and the environment and tabulated data on the plants` production and load factors. The Finnish NPP units were in power operation for the whole first quarter of 1998. All the units were in long-term test operation at uprated power level authorised by STUK. The load factor average of the plant units was 100.8%. An oil leak at Olkiluoto NPP Unit 2 caused an ignition that was promptly extinguished. A subsequent appraisal of the event disclosed deficiencies in the functioning of the plant unit`s operating organization and the event was classified INES level 1. Other events in this quarter had no bearing on nuclear or radiation safety. Occupational doses and radioactive releases off-site were below authorized limits. Radioactive substances were measurable in samples collected around the plants in such quantities only as have no bearing on the radiation exposure of the population. (orig.)

  4. Decontamination systems information and research program. Quarterly report, October 1995--December 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    West Virginia University (WVU) and the U.S. Department of Energy Morgantown Energy Technology Center (DOE/METC) entered into a Cooperative Agreement on August 29, 1992 titled {open_quotes}Decontamination Systems Information and Research programs{close_quotes} (DOE Instrument No. DE-FC21-92MC29467) This report contains the efforts of the research projects comprising the Agreement for the 4th calendar quarter of 1995, and is the final quarterly report deliverable required for the period ending 31 December 1995. The projects reported for the WVU Cooperative Agreement are categorized into the following three areas: 1.0 In Situ Remediation Process Development, 2.0 Advanced Product Applications Testing, and 3.0 Information Systems, Public Policy, Community Outreach, and Economics. Summaries of the significant accomplishments for the projects reported during the period 1 October 95 through 31 December 95 are presented in the following discussions.

  5. Geothermal direct-heat utilization assistance. Quarterly project progress report, July--September 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    This report summarizes geothermal technical assistance, R and D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the fourth quarter of FY-97 (July--September 1997). It describes 213 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include requests for general information including maps, geothermal heat pumps, resource and well data, space heating and cooling, greenhouses, acquaculture, equipment, district heating, resorts and spas, and industrial applications. Research activities include the completion of a Comprehensive Greenhouse Developer Package. Work accomplished on the revision of the Geothermal Direct Use Engineering and Design Guidebook are discussed. Outreach activities include the publication of the Quarterly Bulletin (Vol. 18, No. 3), dissemination of information mainly through mailings of publications, geothermal library acquisition and use, participation in workshops, short courses, and technical meetings by the staff, and progress monitor reports on geothermal activities.

  6. Shale oil value enhancement research. Quarterly report, March 1 - May 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    Activities during this quarter focused on integrating the various tasks and elements. During Phase-1, substantial effort was placed on designing and automating the identification of molecular types present in shale oil. The ability to know the molecular composition and to track a given ``target`` species through the initial concentration steps was deemed critically important to the ultimate success of the three-phase project. It has been this molecular tracking ability that clearly distinguishes the JWBA work from prior shale oil research. The major software and hardware tasks are not in place to rapidly perform these analytical efforts. Software improvements are expected as new questions arise. The existence of the major nitrogen and oxygen types in shale oil has been confirmed. Most importantly, the ability to convert higher molecular weight types to lower molecular weight types was preliminarily confirmed in the present quarter. This is significant because it confirms earlier hypothesis that values are found though out the boiling range. Potential yields of extremely high value chemicals, e.g., $1000/bbl of up to 10% by weight of the barrel remain a feasible objective. Market and economic assessment continue to show encouraging results. Markets for specialty and fine chemicals containing a nitrogen atom are expanding both in type and application. Initial discussions with pharmaceutical and agrochemical industries show a strong interest in nitrogen-based compounds. Major progress was made during this quarter in completing agreements with industry for testing of shale oil components for biological activity. Positive results of such testing will add to the previously known applications of shale oil components as pure compounds and concentrates. During this quarter, we will formulate the pilot plant strategy for Phase-11(a).

  7. Environmental Restoration Operations: Consolidated Quarterly Report January -March 2017

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, John R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-07-01

    This Environmental Restoration Operations (ER) Consolidated Quarterly Report (ER Quarterly Report) provides the status of ongoing corrective action activities being implemented at Sandia National Laboratories, New Mexico (SNL/NM) during the January, February, and March 2017 quarterly reporting period. Table I-1 lists the Solid Waste Management Units (SWMUs) and Areas of Concern (AOCs) identified for corrective action at SNL/NM. Sections I.2.1 and I.2.2 summarize the work completed during this quarter. Section I.2.1 summarizes the quarterly activities at sites undergoing corrective action field activities. Field activities are conducted at the three groundwater AOCs (Burn Site Groundwater [BSG AOC], Technical Area [TA]-V Groundwater [TAVG AOC], and Tijeras Arroyo Groundwater [TAG AOC]). Section I.2.2 summarizes quarterly activities at sites where the New Mexico Environment Department (NMED) Hazardous Waste Bureau (HWB) issued a certificate of completion and the sites are in the corrective action complete (CAC) regulatory process. Currently, SWMUs 8 and 58, 68, 149, 154, and 502 are in the CAC regulatory process. Corrective action activities are deferred at the Long Sled Track (SWMU 83), the Gun Facilities (SWMU 84), and the Short Sled Track (SWMU 240) because these three sites are active mission facilities. These three active mission sites are located in TA-III. This Sandia National Laboratories, New Mexico Environmental Restoration Operations (ER) Consolidated Quarterly Report (ER Quarterly Report) fulfills all quarterly reporting requirements set forth in the Resource Conservation and Recovery Act Facility Operating Permit and the Compliance Order on Consent.

  8. Natural gas imports and exports, third quarter report 2000

    Energy Technology Data Exchange (ETDEWEB)

    None

    2000-12-01

    The Office of Natural Gas and Petroleum Import and Export Activities prepares quarterly reports showing natural gas import and export activity. Companies are required to file quarterly reports. Attachments show the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the 5 most recent quarters, volumes and prices of gas purchased by long-term importers and exporters during the past 12 months, volume and price data for gas imported on a short-term or spot market basis, and the gas exported on a short-term or spot market basis to Canada and Mexico.

  9. Natural gas imports and exports, first quarter report 2000

    Energy Technology Data Exchange (ETDEWEB)

    None

    2000-06-01

    The Office of Natural Gas and Petroleum Import and Export Activities prepares quarterly reports showing natural gas import and export activity. Companies are required to file quarterly reports. Attachments show the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the 5 most recent reporting quarters, volumes and prices of gas purchased by long-term importers and exporters during the past 12 months, volume and price data for gas imported on a short-term or spot market basis, and the gas exported on a short-term or spot market basis to Canada and Mexico.

  10. Natural gas imports and exports, fourth quarter report 1999

    Energy Technology Data Exchange (ETDEWEB)

    None

    2000-03-01

    The Office of Natural Gas and Petroleum Import and Export Activities prepares quarterly reports showing natural gas import and export activity. Companies are required to file quarterly reports. Attachments show the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the five most recent quarters, volumes and prices of gas purchased by long-term importers and exporters during the past 12 months, volume and price data for gas imported on a short-term or spot market basis, and the gas exported on a short-term or spot market basis to Canada and Mexico.

  11. Quarterly coal report, April--June 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-26

    In the second quarter of 1993, the United States produced 235 million short tons of coal. This brought the total for the first half of 1993 to 477 million short tons, a decrease of 4 percent (21 million short tons) from the amount produced during the first half of 1992. The decrease was due to a 26-million-short-ton decline in production east of the Mississippi River, which was partially offset by a 5-million-short-ton increase in coal production west of the Mississippi River. Compared with the first 6 months of 1992, all States east of the Mississippi River had lower coal production levels, led by West Virginia and Illinois, which produced 9 million short tons and 7 million short tons less coal, respectively. The principal reasons for the drop in coal output for the first 6 months of 1993 compared to a year earlier were: a decrease in demand for US coal in foreign markets, particularly the steam coal markets; a draw-down of electric utility coal stocks to meet the increase in demand for coal-fired electricity generation; and a lower producer/distributor stock build-up. Distribution of US coal in the first half of 1993 was 15 million short tons lower than in the first half of 1992, with 13 million short tons less distributed to overseas markets and 2 million short tons less distributed to domestic markets.

  12. Quarterly Program Progress Report April 1, 2002-June 30, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Palafox, Neal A., MD, MPH

    2002-07-31

    DOE B188 DOE/PHRI Special Medical Care Program in the Republic of the Marshall Islands (RMI)Quarterly Program Progress Report The DOE/PHRI Special Medical Care Program continues to provide, on a year round basis, a broad spectrum of medical care to the DOE patient population. During the fourth quarter of Year 4, the following medical services were provided: (1) Annual medical examinations for the DOE patient population (see Exhibit 1 for details). (2) Medications for the DOE patient population. (3) Preventive and primary medical care to the DOE patient population in the RMI as time and resources permit. (4) Additional manpower for the outpatient clinics at Ebeye and Majuro Hospitals (see Exhibit 2 for details). (5) Ancillary services such as labs, radiology and pharmacy in coordination with Kwajalein Hospital, Majuro Hospital and the 177 Health Care Program (177 HCP). (6) Referrals to Ebeye Hospital, Majuro Hospital and Kwajalein Hospital as necessary. (7) Referrals to Straub Clinic and Hospital in Honolulu as necessary (for details see Exhibit 1). (8) Monitored and adjusted monthly annual examination schedules based on equipment failure at Kwajalein. In addition to the above, the program was also involved in the following activities during this quarter: (1) Organized and conducted continuing medical education (CME) talks for the program's RMI staff and other RMI healthcare workers. (2) Held meetings with RMI government officials and Local Atoll government officials. (3) Input past medical records into the Electronic Medical Record (EMR) system. (4) Made adjustments to and created more templates for the EMR system. (5) Coordinated with the Public Health Departments on Majuro and Ebeye. (6) Met with PEACESAT to discuss possible collaboration on high speed Internet access. (7) Looked for opportunities to expand the program's telehealth capabilities. (8) Participated in the DOE-RMI Meeting in Honolulu. (9) Finalized the agreement with the RMI Ministry of

  13. TAO/TRITON, RAMA, and PIRATA Buoys, Quarterly, Relative Humidity

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset has quarterly Relative Humidity data from the TAO/TRITON (Pacific Ocean, http://www.pmel.noaa.gov/tao/), RAMA (Indian Ocean,...

  14. Natural gas imports and exports. First quarter report, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-08-01

    The Office of Natural Gas and Petroleum Import and Export Activities prepares quarterly reports summarizing the data provided by companies authorized to import or export natural gas. Companies are required, as a condition of their authorizations, to file quarterly reports. This report is for the first quarter of 1998 (January through March). Attachment A shows the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the five most recent reporting quarters. Attachment B shows volumes and prices of gas purchased by long-term importers and exporters during the past 12 months. Attachment C shows volume and price information pertaining to gas imported on a short-term or spot market basis. Attachment D shows the gas exported on a short-term or spot market basis to Canada and Mexico.

  15. Natural gas imports and exports: Third quarter report, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    The Office of Natural Gas and Petroleum Import and Export Activities prepares quarterly reports summarizing the data provided by companies authorized to import or export natural gas. Companies are required, as a condition of their authorizations, to file quarterly reports. This report is for the third quarter of 1998 (July--September). Attachment A shows the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the five most recent calendar quarters. Attachment B shows volumes and prices of gas purchased by long-term importers and exporters during the past 12 months. Attachment C shows volume and price information pertaining to gas imported on a short-term or spot market basis. Attachment D shows the gas exported on a short-term or spot market basis to Canada and Mexico.

  16. Natural gas: Imports and exports third quarter report 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    The Office of Fuels Programs prepares quarterly reports summarizing the data provided by companies with authorizations to import or export natural gas. Companies are required, as a condition of their authorizations, to file quarterly reports with the OFP. This report is for the third quarter of 1993 (July--September). Attachment A shows the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the five most recent reporting quarters. Attachment B shows volumes and prices of gas purchased by long-term importers and exporters during the past twelve months (October 1992--September 1993). Attachment C shows volume and price information pertaining to gas imported on a short-term or spot market basis. Attachment D shows the gas exported on a short-term or spot market basis to Canada and Mexico.

  17. Okefenokee National Wildlife Refuge Quarterly Report of Biological Investigations

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Quarterly summary of wildlife population assessments (inlcuding wading birds, waterfowl, and other species), and ecological and plant succession on the refuge in 1940.

  18. The plant ecology of Amchitka Island, Alaska: Quarterly report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This quarterly report summarizes the findings of a study on the plant ecology of Amchitka Island. Observations of topographic forms, microclimate relations,...

  19. Natural gas imports and exports. Second quarter report, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The Office of Natural Gas and Petroleum Import and Export Activities prepared quarterly reports summarizing the data provided by companies authorized to import or export natural gas. Companies are required, as a condition of their authorizations, to file quarterly reports. This report is for the second quarter of 1998 (April through June). Attachment A shows the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the five most recent reporting quarters. Attachment B shows volumes and prices of gas purchased by long-term importers and exporters during the past 12 months. Attachment C shows volume and price information pertaining to gas imported on a short-term or spot market basis. Attachment D shows the gas exported on a short-term or spot market basis to Canada and Mexico.

  20. California community water systems quarterly indicators dataset, 1999-2008

    Data.gov (United States)

    California Environmental Health Tracking Program — This data set contains quarterly measures of arsenic and nitrates in public drinking water supplies. Data are derived from California Office of Drinking Water (ODW)...

  1. TAO/TRITON, RAMA, and PIRATA Buoys, Quarterly, Position

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset has quarterly Position data from the TAO/TRITON (Pacific Ocean, http://www.pmel.noaa.gov/tao/), RAMA (Indian Ocean, http://www.pmel.noaa.gov/tao/rama/),...

  2. Solar Energy Technologies Program Newsletter - First Quarter 2010

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-04-22

    The first quarter 2010 edition of the Solar Energy Technologies Program newsletter summarizes the activities for the past three months, funding opportunities, highlights from the national labs, and upcoming events.

  3. TAO/TRITON, RAMA, and PIRATA Buoys, Quarterly, Longwave Radiation

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset has quarterly Incoming Longwave Radiation data from the TAO/TRITON (Pacific Ocean, http://www.pmel.noaa.gov/tao/), RAMA (Indian Ocean,...

  4. Sullys Hill Quarterly Narrative Reports : February 1941 - January 1942

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report contains quarterly narrative reports for Sullys Hill Game Preserve for February 1941 - January 1942. This reports summarizes activities and...

  5. US energy industry financial developments, 1993 first quarter

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-25

    Net income for 259 energy companies-- including, 20 major US petroleum companies-- rose 38 percent between the first quarter of 1992 and the first quarter of 1993. An increased level of economic activity, along with colder weather, helped lift the demand for natural gas. crude oil, coal, and electricity. The sharp rise in the domestic price of natural gas at the wellhead relative to the year-ago quarter was the most significant development in US energy during the first quarter. As a consequence of higher natural gas prices, the upstream segment of the petroleum industry reported large gains in income, while downstream income rose due to higher refined product demand. Increased economic activity and higher weather-related natural gas demand also led to improvements in income for the rate-regulated energy segment. However, declining domestic oil production continued to restrain upstream petroleum industry earnings growth, despite a moderate rise in crude oil prices.

  6. Quarterly Water Quality Surveys - Salton Sea [ds429

    Data.gov (United States)

    California Department of Resources — In the spring of 2003, California Department of Fish and Game (CDFG) personnel began quarterly sampling of Salton Sea fish at fourteen stations around the sea, as...

  7. UNLV Information Science Research Institute. Quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Nartker, T.A.

    1994-12-31

    This document summarizes the activities and progress for the 1994 Fall quarter for the UNLV Information Science Research Institute. Areas covered include: Symposium activity, Staff activity, Document analysis program, Text-retrieval program, and Institute activity.

  8. TAO/TRITON, RAMA, and PIRATA Buoys, Quarterly, Dynamic Height

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset has quarterly Dynamic Height data (a measure of the elevation of the sea level, calculated by integrating the specific volume anomaly of the sea water...

  9. Natural gas imports and exports. Fourth quarter report, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    The Office of Natural Gas and Petroleum Import and Export Activities prepares quarterly reports summarizing the data provided by companies authorized to import or export natural gas. Companies are required, as a condition of their authorizations, to file quarterly reports. This report is for the fourth quarter of 1998 (October through December). Attachment A shows the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the five most recent reporting quarters. Attachment B shows volumes and prices of gas purchased by long-term importers and exporters during the past 12 months. Attachment C shows volume and price information pertaining to gas imported on a short-term or spot market basis. Attachment D shows the gas exported on a short-term or spot market basis to Canada and Mexico.

  10. TAO/TRITON, RAMA, and PIRATA Buoys, Quarterly, Wind Stress

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset has quarterly Wind Stress data from the TAO/TRITON (Pacific Ocean, http://www.pmel.noaa.gov/tao/), RAMA (Indian Ocean,...

  11. 77 FR 38211 - Rescission of Quarterly Financial Reporting Requirements

    Science.gov (United States)

    2012-06-27

    ... Financial Reporting Requirements AGENCY: Federal Motor Carrier Safety Administration, DOT. ACTION: Direct...) eliminates the quarterly financial reporting requirements for certain for-hire motor carriers of property... would be ineffective or unacceptable without a change. III. Background Annual Financial Reporting...

  12. EMSL Quarterly Highlights Report Second Quarter, Fiscal Year 2010 (January 1, 2010 through March 31, 2010)

    Energy Technology Data Exchange (ETDEWEB)

    West, Staci A.; Showalter, Mary Ann; Manke, Kristin L.; Carper, Ross R.; Wiley, Julie G.; Beckman, Mary T.

    2010-04-20

    The Environmental Molecular Sciences Laboratory (EMSL) is a U.S. Department of Energy (DOE) national scientific user facility located at Pacific Northwest National Laboratory (PNNL) in Richland, Washington. EMSL is operated by PNNL for the DOE-Office of Biological and Environmental Research. At one location, EMSL offers a comprehensive array of leading-edge resources and expertise. Access to the instrumentation and expertise is obtained on a peer-reviewed proposal basis. Staff members work with researchers to expedite access to these capabilities. The "EMSL Quarterly Highlights Report" documents current research and activities of EMSL staff and users.

  13. Energy Programs at the Johns Hopkins University Applied Physics Laboratory, Quarterly Report, April-June 1980

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    The Johns Hopkins University Applied Physics Laboratory, under contracts with several agencies of the federal government and an agency of the State of Maryland, is engaged in developing energy resources, utilization concepts, and monitoring and storage methods. This Quarterly Report summarizes the work on the various tasks as of 30 June 1980. The Energy Quarterly Report is divided into three sections. The first, Geothermal Energy Development Planning and Technical Assistance, supported by the Department of Energy/Division of Geothermal Energy (DOE/DGE), contains reports on the progress of geothermal-related tasks on which effort was concentrated during the quarter. The second section, Operational Research, Hydroelectric Power Development, supported by the Department of Energy/Resource Applications (DOE/RA), contains reports on small-scale hydroelectric investigations in the southeastern states. The third section, Energy Conversion and Storage Techniques, contains three articles. The first is on data analysis of OTEC core unit condenser tests, and is supported by the Department of Energy/Division of Central Solar Technology (DOE/CST). The second is on the current status of the Community Annual Storage Energy System at the U.S. Naval Air Station, Norfolk, Va., and is supported by the Department of Energy and the Department of Defense, Naval Facilities Engineering Command/Atlantic Division. The third is on utilization of landfill methane and is supported by Argonne National Laboratory.

  14. Results for the Fourth Quarter Calendar Year 2015 Tank 50H Salt Solution Sample

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-01-11

    In this memorandum, the chemical and radionuclide contaminant results from the Fourth Quarter Calendar Year 2015 (CY15) sample of Tank 50H salt solution are presented in tabulated form. The Fourth Quarter CY15 Tank 50H samples were obtained on October 29, 2015 and received at Savannah River National Laboratory (SRNL) on October 30, 2015. The information from this characterization will be used by Defense Waste Processing Facility (DWPF) & Saltstone Facility Engineering for the transfer of aqueous waste from Tank 50H to the Salt Feed Tank in the Saltstone Production Facility, where the waste will be treated and disposed of in the Saltstone Disposal Facility. This memorandum compares results, where applicable, to Saltstone Waste Acceptance Criteria (WAC) limits and targets. Data pertaining to the regulatory limits for Resource Conservation and Recovery Act (RCRA) metals will be documented at a later time per the Task Technical and Quality Assurance Plan (TTQAP) for the Tank 50H saltstone task. The chemical and radionuclide contaminant results from the characterization of the Fourth Quarter Calendar Year 2015 (CY15) sampling of Tank 50H were requested by SRR personnel and details of the testing are presented in the SRNL Task Technical and Quality Assurance Plan.

  15. Energy Programs at the Johns Hopkins University Applied Physics Laboratory. Quarterly report, October-December 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-12-01

    The Johns Hopkins University Applied Physics Laboratory, under contracts with several agencies of the federal government and an agency of the State of Maryland, is engaged in developing energy resources, utilization concepts, and storage methods. This Quarterly Report summarizes the work on the various tasks as of 31 December 1979. The Energy Quarterly Report is divided into five sections. The first, Geothermal Energy Development Planning and Technical Assistance, supported by the Department of Energy/Resource Applications (DOE/RA), contains reports on the progress of those geothermal-related tasks where effort was concentrated during the quarter. The second section, Operational Research, Hydroelectric Power Development, also supported by DOE/RA, contains reports on small-scale hydroelectric investigations in the southeastern states. The third section, Seismotectonic Studies, supported by the Reactor Safety Research Division of the Nuclear Regulatory Commission, reports on neotectonic investigations in Connecticut. The fourth section, Energy Conversion and Storage Techniques, contains two articles, the first on OTEC core unit testing supported by the Department of Energy, Division of Central Solar Technology (DOE/CST), and the second on recovery of landfill methane, supported by the Argonne National Laboratory. The fifth section, New Energy Technologies, reports on Laboratory studies of an unconventional gas source--Eastern Devonian shales.

  16. NREL PV Working With Industry Newsletter: 4th Quarter 1999

    Energy Technology Data Exchange (ETDEWEB)

    Moon, S.; Poole, L.

    2000-03-03

    NREL PV Working With Industry is a quarterly newsletter devoted to the research, development, and deployment performed by NREL staff in concert with their industry and university partners. The Fourth Quarter, 1999 issue, titled ''Knowledge is PV Power'' focuses on the contribution of the university-based subcontractors to the PV Program. The editorialist is Robert Birkmire, Director of the Institute of Energy Conversion, which is affiliated with the University of Delaware.

  17. Quarters, Five Layers of Happiness: Can urbanship make people happier?

    Directory of Open Access Journals (Sweden)

    Konstantin Lidin

    2016-10-01

    Full Text Available In everyday life quarters are often perceived as urban fragments divided according to peculiarities of the lifestyle (urbanship. Every variation of urbanship has a corresponding conception of happiness. Thus, only urbanistic decisions on a quarter scale can make citizens happier. City, regional and country scales are too big, and the variety of forms of urbanship (and corresponding visions of happiness is too wide there to search for uniform ways of optimization of the city environment.

  18. Persistence of quarterly earnings: an empirical investigation in Brazil

    OpenAIRE

    Renê Coppe Pimentel; Andson Braga de Aguiar

    2012-01-01

    The aim of this paper is to estimate and analyze quarterly earnings persistence. In addition, we explore if earnings persistence varies across firms based on size and corporate governance standards. We first estimate the parameter revision of earnings and then we test the hypotheses that the parameter of earnings persistence is different for firms with different sizes (H1) and corporate governance standards (H2). We collect data from Brazilian listed firms with quarterly earnings per share av...

  19. Quarterly report for the electricity market; Kvartalsrapport for kraftmarknaden

    Energy Technology Data Exchange (ETDEWEB)

    Eliston, Anton Jaynand; Waeringstad, Thomas; Holmqvist, Erik; Lund Per Tore Jensen; Magnussen, Ingrid; Willumsen, Mats Oivind; Vik, Martin Andreas; Rasmussen, Kristian; Pettersen, Finn Erik Ljaastad; Weir, David Edward; Thorsen, Kjell; Langseth, Benedicte; Skau, Seming Haakon

    2013-02-01

    In the fourth quarter of 2012 the total inflow was 20.4 TWh, 2.8 TWh less than normal and 11.3 TWh less than in the same quarter than in 2011. Meanwhile the weather was slightly colder than normal, which contributed to high production and normalization of reservoir fillings. At the end of the quarter, the reservoir level was 0.8 percentage points below normal for the season, while it was 4.5 percentage points over the beginning of the quarter. At the end of 2012 it was 9.9 percent landfill units lower than the same time in 2011. Norway had a power consumption of 37.2 TWh in the fourth quarter, an increase of 9 percent from last year. In 2012, consumption was 130.0 TWh, an increase of around 5 TWh from 2011. Power production in Norway was 39.2 TWh in the fourth quarter - an increase of 2.4 percent from last year. In 2012, production was 147.9 TWh, compared to 128.1 TWh in 2011. The production increase is due to high reservoir levels at the beginning of 2012, and more than normal inflow. This gave high exports abroad. In the quarter, Norway had a net export of 2 TWh of electricity and was 17.9 TWh in 2012. It is the highest since 2000. The good resource gave a relatively low price level in the wholesale market for electricity. The average spot price in the Norwegian market areas were NOK 268-277 / MWh in the fourth quarter. In 2012 the price was 217-236 NOK/ MWh.(eb)

  20. Wave Reflection and Loss Characteristics of an Emerged Quarter Circle Breakwater with Varying Seaside Perforations

    Science.gov (United States)

    Binumol, S.; Rao, Subba; Hegde, Arkal Vittal

    2017-09-01

    Breakwaters are one of the most important harbour structures constructed to withstand and dissipate the dynamic energy due to the action of the waves. Due to fast growing need of the universe and advances in technology different types of breakwaters are being developed. Quarter circle breakwater is a new type of breakwater emerged from semi circular breakwater and the first model was developed in Peoples Republic of China (2006). Quarter circle breakwater with perforations posses merits of caisson as well as perforated breakwaters such as low weight, requires less materials, suited for poor soil conditions, easily transported, handled and placed at the site, aesthetically pleasing, cost effective, eco-friendly and stable. Therefore it is necessary to carry out detailed studies on hydrodynamic characteristics to investigate the suitability and applicability of various types of quarter circle breakwaters. The present study investigates the wave reflection and loss characteristics of an emerged seaside perforated quarter circle breakwater of radius 55 cm and with varying ratios of spacing to diameter of perforations, for different water depths and wave conditions. The tests were conducted in the two-dimensional monochromatic wave flume available in Marine Structures laboratory of Department of Applied Mechanics and Hydraulics of National Institute of Technology, Surathkal, Karnataka, India. The results were plotted as non-dimensional graphs and it was observed that the reflection coefficient increases with increase in wave steepness for all values of ratio of height of breakwater structure to water depth. For a constant water depth, wave reflection increases with increase in ratio of spacing to diameter of perforations. It was also found that the loss coefficient decreases with increase in wave steepness for all values of ratio of height of breakwater structure to water depth, and ratio of spacing to diameter of perforations.

  1. Environmental Restoration Operations Consolidated Quarterly Report: July-September 2016

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, John R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-01-01

    This Environmental Restoration Operations (ER) Consolidated Quarterly Report (ER Quarterly Report) provides the status of ongoing corrective action activities being implemented at Sandia National Laboratories, New Mexico (SNL/NM) during the July, August, and September 2016 quarterly reporting period. The Solid Waste Management Units (SWMUs) and Areas of Concern (AOCs) identified for corrective action at SNL/NM are listed in Table I-1. Sections I.2.1 and I.2.2 summarize the work completed during this quarter. Section I.2.1 summarizes the quarterly activities at sites undergoing corrective action field activities. Field activities are conducted at the three groundwater AOCs (Burn Site Groundwater [BSG AOC], Technical Area [TA]-V Groundwater [TAVG AOC], and Tijeras Arroyo Groundwater [TAG AOC]). Section I.2.2 summarizes quarterly activities at sites where the New Mexico Environment Department (NMED) issued a certificate of completion and the sites are in the corrective action complete (CAC) regulatory process. Currently, SWMUs 8 and 58, 68, 149, 154, and 502 are in the CAC regulatory process. Corrective action activities are deferred at the Long Sled Track (SWMU 83), the Gun Facilities (SWMU 84), and the Short Sled Track (SWMU 240) because these three sites are active mission facilities. These three active sites are located in TA-III.

  2. Sintered soft magnetic materials. Properties and applications

    Science.gov (United States)

    Bas, J. A.; Calero, J. A.; Dougan, M. J.

    2003-01-01

    A comparison is presented of the characteristics and production requirements of a variety of materials used to produce sintered soft magnetic parts. These include pure iron, phosphorous-iron, silicon-iron, nickel-iron, and cobalt-iron, together with new coated materials based on encapsulated iron powders. In these bonded materials an organic and/or inorganic insulator is used to coat the metallic powder particles giving a magnetic composite. The suitability of the different materials for use in both direct and alternating current applications is reviewed, and examples are provided of their application in both the automotive and other sectors. The results of a comparative study of motors using stators and rotors based on both conventional laminated materials and the insulated iron powders are presented, in which the new materials show advantages of reduced hysteresis losses at high frequencies, and isotropy of magnetic properties. Nevertheless, the applications of these materials in electrical motors requires the modification of existing designs.

  3. Weldon Spring Site Remedial Action Project Federal Facilities Agreement: Quarterly environmental data summary for third quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-06

    In support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement, a copy of the Quarterly Environmental Data Summary (QEDS) for the third quarter of 1998 is enclosed. The data presented in this letter and attachment constitute the QEDS. The data, except for air monitoring data and site KPA generated data (uranium analyses), were received from the contract laboratories, verified by the Weldon Spring Site verification group, and merged into the database during the third quarter of 1998. Air monitoring data presented are the most recent complete sets of quarterly data. Significant data, defined as data values that have exceeded defined above normal Level 2 values, are discussed in this letter for Environmental Monitoring Plan (EMP) generated data only. Above normal Level 2 values are based, in ES and H procedures, on historical high values, DOE Derived Concentration Guides (DCGs), NPDES limits, and other guidelines. The procedures also establish actions to be taken in the event that above normal data occur.

  4. Department of Veterans Affairs Quarterly Notice to Congress on Data Breaches First Quarter of Fiscal Year 2014 October 1, 2013 through December 31, 2013

    Data.gov (United States)

    Department of Veterans Affairs — This is a quarterly notice to congress containing statistics on data breeches for fiscal year 2014 for the first quarter (2014 October 1, 2013 through December 31,...

  5. Racing speeds of quarter horses, thoroughbreds and Arabians.

    Science.gov (United States)

    Nielsen, B D; Turner, K K; Ventura, B A; Woodward, A D; O'Connor, C I

    2006-08-01

    While Quarter Horses are recognised as the fastest breed of horse, direct comparisons to race times with other breeds can be misleading. Quarter Horse races begin when the starting gates open. Thoroughbred and Arabian races begin a short distance from the gates after horses have started running. This study compared speeds of these breeds as they accelerate from the starting gates and during the middle and end of races. To compare racing speeds of the 3 breeds, and to compare speeds during various segments of the races. Video tapes of races were obtained from a local track. The various race segments were viewed and the winning horse timed by 5 individuals. Fastest and slowest times were removed and the 3 remaining times averaged. Quarter Horses averaged faster speeds than Thoroughbreds even when Thoroughbreds were raced at a distance (402 m) similar to Quarter Horse races. Both breeds were substantially faster than Arabians. Quarter Horses racing 336 m or less gained speed in each segment of the race while Arabians and Thoroughbreds racing 1006 m ran fastest during the middle of the race and had decreased their speed in the final segment of the race. Despite similar race times reported for 402 m, Quarter Horses averaged faster speeds than Thoroughbreds when timed from a standing start. In short races, both breeds accelerate throughout the race. Arabians, despite being known for endurance, had slowed by the end of the race. This study demonstrates that Quarter Horses achieve faster racing speeds than do other breeds. It also reveals a potential flaw in race-riding strategy as a more consistent pace throughout the Arabian and longer Thoroughbred races may be more efficient and result in a faster overall race time.

  6. Geothermal direct-heat utilization assistance. Quarterly project progress report, January--March 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    The Geo-Heat Center provides technical assistance on geothermal direct heat applications to developers, consultants and the public which could include: data and information on low-temperature (< 1500 C) resources, space and district heating, geothermal heat pumps, greenhouses, aquaculture, industrial processes and other technologies. This assistance could include preliminary engineering feasibility studies, review of direct-use project plans, assistance in project material and equipment selection, analysis and solutions of project operating problems, and information on resources and utilization. The following are brief descriptions of technical assistance provided during the second quarter of the program.

  7. Oak Ridge Reservation Federal Facility Agreement for the Environmental Restoration Program. Volume 1, Quarterly report, October--December 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    This Oak Ridge Reservation Federal Facility Agreement Quarterly Report for the Environmental Restoration Program was prepared to satisfy requirements for progress reporting on Environmental Restoration Program (ER) activities as specified in the Oak Ridge Reservation Federal Facility Agreement (FFA) established between the US Department of Energy (DOE), the US Environmental Protection Agency, and the Tennessee Department of Environment and Conservation. The reporting period covered in this document is October through December 1995. This work was performed under Work Breakdown Structure 1.4.12.2.3.04 (Activity Data Sheet 8304). Publication of this document meets two FFA milestones. The FFA Quarterly Report meets an FFA milestone defined as 30 days following the end of the applicable reporting period. Appendix A of this report meets the FFA milestone for the Annual Removal Action Report for the period FYs 1991--95. This document provides information about ER Program activities conducted on the Oak Ridge Reservation under the FFA. Specifically, it includes information on milestones scheduled for completion during the reporting period, as well as scheduled for completion during the next reporting period (quarter); accomplishments of the ER Program; concerns related to program work; and scheduled activities for the next quarter. It also provides a listing of the identity and assigned tasks of contractors performing ER Program work under the FFA.

  8. Array Automated Assembly, Phase 2. Quarterly report for the quarter ending June 30, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, W.E.; Kimberly, W.; Mardesich, N.; Pepe, A.

    1978-08-01

    The Automated Array Assembly Task is a process development task. The overall goal is to advance solar cell and module process technology to meet the 1986 goal of a production capacity of 500 megawatts per year at a cost of less than $500 per kilowatt. Work performed during the quarter ending June 30, 1978 is covered. Discussions are included on diffusion masking dielectric evaluation, P/sup +/ back surface fields formed by firing screen printed aluminum back contacts, screen printable glass systems for use as isolation dielectrics, screen printed front contact metallization and stresses caused by thermal cycling silicon solar cells adhesively bonded to glass superstrates. SEM pictures of the fritted layer at the interface between the front metallization and silicon are presented. Results of an x-ray topographic examination of the silicon under and adjacent to printed and fired patterns of fritted conductor and dielectric pastes are given.

  9. Natural gas imports and exports. First quarter report 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    The Office of Fuels Programs Prepares quarterly reports Summarizing the data provided by companies authorized to import or export natural gas. Companies are required, as a condition of their authorizations, to file quarterly reports with the OFP. This report is for the first quarter of 1994 (January--March). Attachment A shows the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the five most recent reporting quarters. Attachment B shows volumes and prices of gas purchased by long-term importers and exporters during the past twelve months. Attachment C shows volume and price information for gas imported on a short-term basis. Attachment D shows the gas exported on a short-term basis to Canada and Mexico. During the first three months of 1994, data indicates that gas imports grew by about 14 percent over the level of the first quarter of 1993 (668 vs. 586 Bcf), with Canadian and Algerian imports increasing by 12 and 53 percent, respectively. During the same time period, exports declined by 15 percent (41 vs. 48 Bcf). Exports to Canada increased by 10 percent from the 1993 level (22 vs. 20 Bcf) and exports to Mexico decreased by 64 percent (5 vs. 14 Bcf).

  10. Yucca Mountain Site Characterization Project: Technical Data Catalog quarterly supplement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-31

    The March 21, 1993, Department of Energy (DOE)/Nuclear Regulatory Commission (NRC) Site-Specific Procedural Agreement for Geologic Repository Site Investigation and Characterization Program requires the DOE to develop and maintain a catalog of data which will be updated and provided to the NRC at least quarterly. This catalog is to include a description of the data; the time (date), place, and method of acquisition; and where it may be examined. The Yucca Mountain Site Characterization Project (YMP) Technical Data Catalog is published and distributed in accordance with the requirements of the Site-Specific Agreement. The YMP Technical Data Catalog is a report based on reference information contained in the YMP Automated Technical Data Tracking System (ATDT). The reference information is provided by Participants for data acquired or developed in support of the YMP. The Technical Data Catalog is updated quarterly and published in the month following the end of each quarter. A complete revision to the Catalog is published at the end of each fiscal year. Supplements to the end-of-year edition are published each quarter. These supplements provide information related to new data items not included in previous quarterly updates and data items affected by changes to previously published reference information. The Technical Data Catalog, dated September 30, 1993, should be retained as the baseline document for the supplements until the end-of-year revision is published and distributed in October 1994.

  11. Yucca Mountain Site Characterization Project technical data catalog: Quarterly supplement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The Department of Energy (DOE)/Nuclear Regulatory Commission (NRC) Site-Specific Procedural Agreement for Geologic Repository Site Investigation and Characterization Program requires the DOE to develop and maintain a catalog of data which will be updated and provided to the NRC at least quarterly. This catalog is to include a description of the data; the time (date), place, and method of acquisition; and where the data may be examined. The Yucca Mountain Site Characterization Project (YMP) Technical Data Catalog is published and distributed-in accordance with the requirements of the Site-Specific Agreement. The YMP Technical Data Catalog is a report based on reference information contained in the YMP Automated Technical Data Tracking System (ATDT). The reference information is provided by Participants for data acquired or developed in support of the YMP. The Technical Data Catalog is updated quarterly and distributed in the month following the end of each quarter. A complete revision to the catalog is published at the end of each fiscal year. Supplements to the end-of-year edition are published each quarter. These supplements provide information related to new data items not included in previous quarterly updates and data items affected by changes to previously published reference information. The Technical Data Catalog, dated September 30, 1994, should be retained as the baseline document for the supplements until the end-of-year revision is published and distributed in October 1995.

  12. Yucca Mountain Site Characterization Project technical data catalog quarterly supplement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-31

    The Department of Energy (DOE)/Nuclear Regulatory Commission (NRC) Site-Specific Procedural Agreement for Geologic Repository Site Investigation and Characterization Program requires the DOE to develop and maintain a catalog of data which will be updated and provided to the NRC at least quarterly. This catalog is to include a description of the data; the time (date), place, and method of acquisition; and where the data may be examined. The Yucca Mountain Site Characterization Project (YMP) Technical Data Catalog is published and distributed in accordance with t requirements of the Site-Specific Agreement. The YMP Technical Data Catalog is a report based on reference information contained in the YMP Automated Technical Data Tracking System (ATDT). The reference information is provided by Participants for data acquired or developed in support of the YMP. The Technical Data Catalog is updated quarterly and distributed in the month following the end of each quarter. A complete revision to the catalog is published at the end of each fiscal year. Supplements to the end-of-year edition are published each quarter. These supplements provide information related to new data items not included in previous quarterly updates and data items affected by changes to@ previously published reference information. The Technical Data Catalog, dated September 30, 1994, should be retained as the baseline document for the supplements until the end-of-year revision is published and distributed in October 1995.

  13. Yucca Mountain Site Characterization Project Technical Data Catalog (Quarterly supplement)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The March 21, 1993, Department of Energy (DOE)/Nuclear Regulatory Commission (NRC) Site-Specific Procedural Agreement for Geologic Repository Site Investigation and Characterization Program requires the DOE to develop and maintain a catalog of data which will be updated and provided to the NRC at least quarterly. This catalog is to include a description of the data; the time (date), place, and method of acquisition; and where it may be examined. The Yucca Mountain Site Characterization Project (YMP) Technical Data Catalog is published and distributed in accordance with the requirements of the Site-Specific Agreement. The YMP Technical Data Catalog is a report based on reference information contained in the YMP Automated Technical Data Tracking System (ATDT). The reference information is provided by Participants for data acquired or developed in support of the YMP. The Technical Data Catalog is updated quarterly and published in the month following the end of each quarter. A complete revision to the Catalog is published at the end of each fiscal year. Supplements to the end-of-year edition are published each quarter. These supplements provide information related to new data items not included in previous quarterly updates and data items affected by changes to previously published reference information. The Technical Data Catalog, dated September 30, 1993, should be retained as the baseline document for the supplements until the end-of-year revision is published and distributed in October 1994.

  14. Persistence of quarterly earnings: an empirical investigation in Brazil

    Directory of Open Access Journals (Sweden)

    Renê Coppe Pimentel

    2012-01-01

    Full Text Available The aim of this paper is to estimate and analyze quarterly earnings persistence. In addition, we explore if earnings persistence varies across firms based on size and corporate governance standards. We first estimate the parameter revision of earnings and then we test the hypotheses that the parameter of earnings persistence is different for firms with different sizes (H1 and corporate governance standards (H2. We collect data from Brazilian listed firms with quarterly earnings per share available at Economatica database from last quarter of 1995 to first quarter 2011. Our results indicate that for most of the firms the earnings persistence is not significantly different from zero. The main implication of this result is that most of quarterly earnings innovation is transitory. In addition, the results support our first hypothesis indicating that larger firms present higher parameter of earnings persistence. The results also indicate that the parameter of earnings persistence is different for firms with different corporate governance standards, partially supporting our second hypothesis.

  15. Environmental Hazards Assessment Program. Quarterly report, January 1994--March 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-04

    The objectives of the EHAP program are to: Develop a holistic, national basis for risk assessment, risk management and risk communication; Develop a pool of talented scientists and experts in cleanup activities, especially in human health aspects, and; Identify needs and develop programs addressing the critical shortage of well-educated, highly-skilled technical and scientific personnel to address the health oriented aspects of environmental restoration and waste management. This report describes activities and reports on progress for the third quarter of year two (January-March, 1994) of the grant. To better accomplish objectives, grant efforts are organized into three major elements: The Crossroads of Humanity Series; Research, Science and Education Programs; and Program Management. The Crossroads of Humanity Series charted a new course, incorporating lessons learned during previous quarters into a series of programs designed to address environmental issues in a real world setting. Reports are included on the various research programs with milestones and deliverables from the third quarter.

  16. Quarterly Report - May through July 2012

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Laniece E. [Los Alamos National Laboratory

    2012-08-09

    The first quarter of my postgraduate internship has been an extremely varied one, and one which I have tackled several different aspects of the project. Because this is the beginning of a new investigation for the Research Library, I think it is appropriate that I explore data management at LANL from multiple perspectives. I have spent a considerable amount of time doing a literature search and taking notes on what I've been reading in preparation for potential writing activities later. The Research Library is not the only research library exploring the possibility of providing services to their user base. The Joint Information Systems Committee (JISC) and the Digital Curation Centre (DCC) in the UK are actively pursuing possibilities to preserve the scientific record. DataOne is a U.S. National Science Foundation (NSF) initiative aimed at helping to curate bioscience data. This is just a tiny sample of the organizations actively looking into the issues surrounding data management on an organizational, cultural, or technical level. I have included a partial bibliography of some papers I have read. Based on what I read, various discussions, and previous library training, I have begun to document the services I feel I could provide researchers in the context of my internship. This is still very much a work in progress as I learn more about the landscape in libraries and at the Laboratory. I have detailed this process and my thoughts on the issue below. As data management is such a complex and interconnected activity, it is impossible to investigate the organizational and cultural needs of the researchers without familiarizing myself with technologies that could facilitate the local cataloging and preservation of data sets. I have spent some time investigating the repository software DSpace. The library has long maintained the digital object repository aDORe, but the differences in features and lack of a user interface compared to DSpace have made DSpace a good

  17. PV Working with Industry, 2nd Quarter, 2000

    Energy Technology Data Exchange (ETDEWEB)

    Poole, L.; Moon, S.

    2000-06-29

    NREL PV Working With Industry is a quarterly newsletter devoted to the research, development, and deployment performed by NREL staff in concert with their industry and university partners. The Second Quarter, 2000, issue is titled ``Our Shared PV Future''. It contains a review of several important PV-related meetings held in the prior three months: the NCPV Program Review, the 16 European PV Conference, and year-2000 Earth Day activities in Denver, CO. The editorialist is Paul Maycock, Publisher of PV News.

  18. NREL PV Working With Industry, Fourth Quarter 2000

    Energy Technology Data Exchange (ETDEWEB)

    Poole, L.

    2000-12-26

    NREL PV Working With Industry is a quarterly newsletter devoted to the research, development, and deployment performed by NREL staff in concert with their industry and university partners. The fourth quarter contains an article that is a followup to the IEEE PVSC conference held in Alaska in September 2000, an article about two new R and D initiatives, and an article on cooperative research efforts between the NCPV and the Solar Buildings and Concentrating Solar Power programs. The editorialist is Jim Rannels, Director of the Office of Power Technologies.

  19. Quarterly Progress Report Fuels Development Operation: July - September 1957

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S. H. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Physical Metallurgy; Minor, J. E. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Fuel Element Design; Evans, E. A. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Ceramic Fuels Development; Wallace, W. P. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Fuels Fabrication Development

    1957-10-15

    The present Quarterly Report is the continuation of a series issued by the new Fuels Development operation. Reports in this series combine portions of the quarterly reports by the former Metallurgy Research and Fuel Technology Sub-Sections. Work reported includes research conducted by the Physical Metallurgy Operation, and research and development conducted by Fuel Design, Fuels Fabrication Development and Ceramic Fuels Development Operations. Studies formerly reported by the Radiometallurgy, Metallography, and Welding and Corrosion Units, in addition to portions of the Fuels Technology work, are reported elsewhere.

  20. Strategic Studies Quarterly. Volume 2, Number 3, Fall 2008

    Science.gov (United States)

    2008-01-01

    with the People’s Liberation Army (PLA). The lowest common denominator of these disparate views is very low indeed—a [ 20 ] Strategic Studies Quarterly...Air Force are than those of the People’s Liberation Army , and despite the disagreeable experiences of the Korean War, I have little doubt that we...Quarterly 13 (Au­ tumn 1996): 10–14. 4. Ibid., 15. 5. Richard Meinhart , Strategic Planning by the Chairmen, Joint Chiefs of Staff, 1990–2005 (Carlisle

  1. NREL PV Working With Industry, v. 27, Third Quarter 2000

    Energy Technology Data Exchange (ETDEWEB)

    Poole, L.; Nahan, R.

    2000-09-12

    NREL PV Working With Industry is a quarterly newsletter devoted to the research, development, and deployment performed by NREL staff in concert with their industry and university partners. The third quarter, contains articles on several important PV-related conferences held in the prior three months: the REAP/HBCU Conference and the IPS-2000 Photochemistry Conference. The issue also contains a preview article of the PV Specialists conference held in Alaska in September. The editorialist is John Benner, PV Specialist Conference Program Chairman.

  2. INL FY2014 1st Quarterly Performance Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kinghorn, Loran [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-07-01

    This report is published quarterly by the Idaho National Laboratory (INL) Performance Assurance Organization. The Department of Energy Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2 “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 76 occurrence reports and over 16 other deficiency reports (including not reportable events) identified at the INL during the period of October 2013 through December 2013. Battelle Energy Alliance (BEA) operates the INL under contract DE AC 07 051D14517

  3. Quarterly Progress Report Fuels Development Operation: January - March 1959

    Energy Technology Data Exchange (ETDEWEB)

    Cadwell, J. J. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation; Tobin, J. C. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Physical Metallurgy; Minor, J. E. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Fuel Element Design; Evans, E. A. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Ceramic Fuels Development; Bush, S. H. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Fuels Fabrication Development

    1959-04-15

    The present Quarterly Report is the continuation of a series issued by the new Fuels Development operation. Reports in this series combine portions of the quarterly reports by the former Metallurgy Research and Fuel Technology Sub-Sections. Work reported includes research conducted by the Physical Metallurgy Operation, and research and development conducted by Fuel Design, Fuels Fabrication Development and Ceramic Fuels Development Operations. Studies formerly reported by the Radiometallurgy, Metallography, and Welding and Corrosion Units, in addition to portions of the Fuels Technology work, are reported elsewhere.

  4. Quarterly Progress Report Fuels Development Operation: October - December 1959

    Energy Technology Data Exchange (ETDEWEB)

    Cadwell, J. J. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation; Tobin, J. C. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Physical Metallurgy; Minor, J. E. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Fuel Element Design; Evans, E. A. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Ceramic Fuels Development; Bush, S. H. [Hanford Site (HNF), Richland, WA (United States). Fuels Development Operation. Fuels Fabrication Development

    1960-01-15

    The present Quarterly Report is the continuation of a series issued by the new Fuels Development operation. Reports in this series combine portions of the quarterly reports by the former Metallurgy Research and Fuel Technology Sub-Sections. Work reported includes research conducted by the Physical Metallurgy Operation, and research and development conducted by Fuel Design, Fuels Fabrication Development and Ceramic Fuels Development Operations. Studies formerly reported by the Radiometallurgy, Metallography, and Welding and Corrosion Units, in addition to portions of the Fuels Technology work, are reported elsewhere.

  5. A&I - MCSAP Program - State Quarterly Report and CVSP Data Dashboard - A&I Login

    Data.gov (United States)

    Department of Transportation — Mini screen view of Data DashboardThe State Quarterly Report and CVSP Data Dashboard (Data Dashboard) is a tool that presents quarterly updated safety data to assist...

  6. Medical and Health Divisions quarterly report, January, February, March 1948

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1948-05-24

    This quarterly progress report describes four programs namely (1) The Metabolic Properties of Plutonium and Allied Materials (2) Biological studies of radiation effects, (3) Biological effects of radiation from external and internal sources, and (4) Health Physics and Chemistry. Progress for each program has been separately indexed and abstracted for the database.

  7. Localised tetanus in Lagos, Nigeria | Okudadejo | Nigerian Quarterly ...

    African Journals Online (AJOL)

    Nigerian Quarterly Journal of Hospital Medicine. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 9, No 4 (1999) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access ...

  8. Strategic Studies Quarterly. Volume 7, Number 1, Spring 2013

    Science.gov (United States)

    2013-01-01

    www.guardian.co.uk/mcveigh/story/0,7369,488284,00.html; and David Segal, "The Pied Piper of Racism ," Washington Post, 12 January 2000. 18. For more on Pierces...alliance to shed the stigma of World STRATEGIC STUDIES QUARTERLY ♦ SPRING 2013 [81] Damon V. Coletta War II and punch above its weight on several issues

  9. Spanish Quarter Museum Pre-Tour Packet for Teachers.

    Science.gov (United States)

    VanVleet, Susan

    This guide provides teachers with background information and teaching activities to prepare students for a visit to the Spanish Quarter Museum in St. Augustine, Florida. It is designed to familiarize students with some of the concepts and words they will encounter in the open-air living history museum where interpreters in period clothing re-live…

  10. Natural gas imports and exports; Fourth quarterly report, 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The Office of Fuels Programs prepares quarterly reports summarizing the data provided by companies authorized to import or export natural gas. Companies are required, as a condition of their authorizations, to file quarterly reports with the OFP. This report is for the fourth quarter of 1993 (October--December). Attachment A shows the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the 5 most recent reporting quarters. Attachment B shows volumes and prices of gas purchased by long-term importers and exporters during the past 12 months. Attachment C shows volume and price information for gas imported on a short-term basis. Attachment D shows the gas exported on a short-term basis to Canada and Mexico. During 1993, data indicates gas imports grew by about 10 percent over the 1992 level (2328 vs. 2122 Bcf), with Canadian and Algerian imports increasing by 8 and 82 percent, respectively. During the same time period, exports declined by 41 percent (144 vs. 243 Bcf). Exports to Canada decreased 47 percent from the 1992 level (50 vs. 95 Bcf) and exports to Mexico decreased by 60 percent (38 vs. 95 Bcf).

  11. Cardiac rehabilitation | Qke | Nigerian Quarterly Journal of Hospital ...

    African Journals Online (AJOL)

    Nigerian Quarterly Journal of Hospital Medicine. Journal Home · ABOUT · Advanced Search · Current Issue · Archives · Journal Home > Vol 8, No 2 (1998) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL ...

  12. Ocean energy systems. Quarterly report, July-September 1982

    Energy Technology Data Exchange (ETDEWEB)

    1982-09-30

    This quarterly report summarizes work on the following tasks as of September 30, 1982: (1) OTEC pilot plant conceptual design review; (2) OTEC methanol; (3) financial and legal considerations in OTEC implementation; (4) GEOTEC resource exploration at Adak, Alaska, and Lualualei, Hawaii; (5) preliminary GEOTEC plant cost estimates; and (6) supervision of testing of pneumatic wave energy conversion system.

  13. Farriery for hoof wall defects: quarter cracks and toe cracks.

    Science.gov (United States)

    Pleasant, R Scott; O'Grady, Stephen E; McKinlay, Ian

    2012-08-01

    Conditions that result in the loss of the structural integrity of the hoof wall, such as quarter and toe cracks, are not uncommon and usually manifest in lameness. The successful management of these problems involves identifying and addressing the underlying causes, stabilization of the foot, and committed follow-up. Copyright © 2012 Elsevier Inc. All rights reserved.

  14. Girls' Living Quarters: Success and Challenge, the Case of ...

    African Journals Online (AJOL)

    user

    Results show that the girls living quarters create access to education, increased enrollment rate, increased academic performance, give security and create favorable learning environment to attend their education. On the other hand, the areas that need improvement in the hostel include administration, learning materials, ...

  15. Motor neuron disease - a case report | Akokhia | Nigerian Quarterly ...

    African Journals Online (AJOL)

    Nigerian Quarterly Journal of Hospital Medicine. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 8, No 2 (1998) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access ...

  16. Coal liquefaction. Quarterly report, July-September 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    The status of coal liquefaction pilot plants supported by US DOE is reviewed under the following headings: company involved, location, contract, funding, process name, process description, flowsheet, history and progress during the July-September 1979 quarter. Supporting projects such as test facilities, refining and upgrading coal liquids, catalyst development, and gasification of residues from coal gasification plants are discussed similarly. (LTN)

  17. Coal Combustion Science quarterly progress report, April--June 1990

    Energy Technology Data Exchange (ETDEWEB)

    Hardesty, D.R. (ed.); Baxter, L.L.; Fletcher, T.H.; Mitchell, R.E.

    1990-11-01

    This document provides a quarterly status report of the Coal Combustion Science Program that is being conducted at the Combustion, Research Facility, Sandia National Laboratories, Livermore, California. Coal devolatilization, coal char combustion, and fate of mineral matter during coal combustion. 56 refs., 25 figs., 13 tabs.

  18. Nigerian Quarterly Journal of Hospital Medicine: Site Map

    African Journals Online (AJOL)

    Journal Home · Journals · Nigerian Quarterly Journal of Hospital Medicine · About · Log In · Register · Advanced Search · By Author · By Title. Issues. Current Issue · Archives · Open Journal Systems · Help. ISSN: 0189-2657. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors ...

  19. Interaction of somatic cell count and quarter milk flow patterns

    NARCIS (Netherlands)

    Tancin, V.; Ipema, A.H.; Hogewerf, P.H.

    2007-01-01

    Milk flow parameters at udder and quarter levels were studied in relation to somatic cell count (SCC) and other risk factors for mastitis (bimodality, duration of decline, and duration of overmilking phase). Thirty-eight Holstein cows in their first to sixth lactations were investigated during 10 mo

  20. Penalised for poverty | Omar | South African Crime Quarterly

    African Journals Online (AJOL)

    South African Crime Quarterly. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 57 (2016) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Penalised for poverty. Jameelah Omar. Abstract. No Abstract.

  1. Quarterly report of Biological and Medical Research Division, April 1955

    Energy Technology Data Exchange (ETDEWEB)

    Brues, A.M.

    1955-04-01

    This report is a compilation of 48 investigator prepared summaries of recent progress in individual research programs of the Biology and Medical Division of the Argonne National Laboratory for the quarterly period ending April,1955. Individual reports are about 3-6 pages in length and often contain research data.

  2. Space Weather Quarterly Is a Jewel in AGU's Crown

    Science.gov (United States)

    Crooker, Nancy

    2014-02-01

    Space Weather Quarterly (SWQ) is an attractive, glossy, hands-on magazine unlike anything else AGU publishes. It is beginning to be recognized as a showcase publication for promoting the goals of one of the four pillars of AGU's strategic plan: science and society.

  3. On the record | du Plessis | South African Crime Quarterly

    African Journals Online (AJOL)

    South African Crime Quarterly. Journal Home · ABOUT · Advanced Search · Current Issue · Archives · Journal Home > Vol 57 (2016) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. On the record. Anton du Plessis du Plessis. Abstract. No Abstract. Full Text:.

  4. Naval Research Logistics Quarterly. Volume 29, Number 2.

    Science.gov (United States)

    1982-06-01

    34 Journal of Economic Theory, 9, 124-140 (1974). [12] Mathur, V., "Some Unresolved Issues in the Location Theory of the Firm," Journal of Urban Economics , 6...and Urban Economics , 8, 117-128 (1978). [14] Moses, L., "Location and the Theory of Production," Quarterly Journal of Economics, 3, 259-272 (1958). [15

  5. Coal gasification. Quarterly report, July-September 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    The status of 18 coal gasification pilot plants or supporting projects supported by US DOE is reviewed under the following headings: company involved, location, contract number, funding, gasification process, history, process description, flowsheet and progress in the July-September 1979 quarter. (LTN)

  6. Environmental Hazards Assessment Program: Quarterly report, October--December 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    This report describes activities and reports on progress for the second quarter (October 93 - December 93) of the second year of the grant to support the Environmental Hazards Assessment Program (EHAP). It reports progress against grant objectives and the Program Implementation Plan published at the end of the first year of the grant.

  7. Demolition Notification for Quarter Ending March 30, 2014

    Energy Technology Data Exchange (ETDEWEB)

    Juarez, Catherine L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-01-06

    The National Nuclear Administration (NNSA) and Los Alamos National Security, LLC (LANS), (collectively the Permittees) are submitting notice of demolition activities for quarter ending March 30, 2014 in accordance with Permit Section 1.17.2 of the Los Alamos National Laboratory (LANL) Hazardous Waste Facility Permit to the New Mexico Environment Department Hazardous Waste Bureau (NMED_HWB).

  8. Penalised for poverty | Omar | South African Crime Quarterly

    African Journals Online (AJOL)

    South African Crime Quarterly. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 57 (2016) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Download this PDF file. The PDF file you selected should load ...

  9. Educational Technology Research Journals: Performance Improvement Quarterly, 2001-2010

    Science.gov (United States)

    Mayer, Alisha Rasmussen; Francis, Jenifer; Harrison, J. Buckley; McPhillen, Ammon S.; West, Richard E.

    2012-01-01

    This article is an analysis of "Performance Improvement Quarterly" (PIQ) for the years 2001-2010. The intent was to examine the article types used, the authors who contributed the most to the journal, the topics the journal most commonly focused on, and the citation frequency of the journal's articles. The analysis revealed that…

  10. Medical and Health Divisions quarterly report, July, August, September, 1948

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This quarterly report describes progress in four programs entitled (1) The Metabolic Properties of Plutonium and Allied Materials, (2) Biological Studies of Radiation Effects, (3) Biological Effects of Radiation from External and Internal Sources and (4) Health Chemistry and Physics. Progress in each program is separately indexed and abstracted for the database.

  11. Quarterly Financial Report for the period ending 30 September 2016

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    2016-09-30

    Sep 30, 2016 ... 4 | QUARTERLY FINANCIAL REPORT FOR THE PERIOD 1 APRIL TO 30 SEPTEMBER 2016. Consolidated overview. Revenues. TABLE 2: REVENUES. The Centre derives its revenues from a Parliamentary appropriation, donor contributions, and other sources. During the six months ended 30 September ...

  12. quarterly financial report for the period ending 30 June 2014

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    2014-06-30

    Jun 30, 2014 ... This Management's Discussion and Analysis (MD&A) provides a narrative outlining the financial results and corporate updates of the International Development Research Centre (IDRC, the. Centre) for the first quarter ended 30 June 2014. This report was prepared as required under section 131.1 of the ...

  13. Quarterly Financial Report for the period ending 31 December 2016

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    2016-12-31

    Dec 31, 2016 ... 4 | QUARTERLY FINANCIAL REPORT FOR THE PERIOD 1 APRIL TO 31 DECEMBER 2016. TABLE 1: FINANCIAL HIGHLIGHTS. * While this table mirrors the actual presentation in the financial statements, the Parliamentary appropriation is considered as revenue throughout this. MD&A. a For more ...

  14. quarterly financial report for the period ending 30 September 2011

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sophie Comeau

    2011-09-30

    Sep 30, 2011 ... the financial results and corporate updates of the International Development Research Centre. (IDRC, the Centre) for both the second quarter and the six months ended 30 September 2011. This report was prepared as required under section 131.1 of the Financial Administration Act using the standard ...

  15. Quarterly Financial Report for the period ending 31 December 2014

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    2014-12-31

    Dec 31, 2014 ... 6 IDRC QUARTERLY FINANCIAL REPORT DECEMBER 2014. Table 5 shows how the appropriation was used during the period ending 31 December 2014. TABLE 5: USE OF THE PARLIAMENTARY APPROPRIATION RECEIVED a For details on revised budget, see page 3. As shown in Table 5, we are ...

  16. quarterly financial report for the period ending 31 December 2012

    International Development Research Centre (IDRC) Digital Library (Canada)

    acray

    2012-12-31

    Dec 31, 2012 ... Introduction. This Management's Discussion and Analysis (MD&A) provides a narrative discussion outlining the financial results and corporate updates of the International Development Research Centre. (IDRC, the Centre) for both the third quarter and the nine months ended 31 December 2012. This report ...

  17. 78 FR 31475 - Rescission of Quarterly Financial Reporting Requirements

    Science.gov (United States)

    2013-05-24

    ... financial reporting requirements for certain for-hire motor carriers of property (Form QFR) and for-hire... the financial reporting requirements transferred from the Interstate Commerce Commission (ICC) to... Provision The proposal would eliminate the quarterly financial reporting requirements for certain for-hire...

  18. Quarterly Financial Report for the period ending 30 June 2016

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    2016-06-30

    Jun 30, 2016 ... 4 | QUARTERLY FINANCIAL REPORT FOR THE PERIOD 1 APRIL TO 30 JUNE 2016. Consolidated overview. Revenues. TABLE 2: REVENUES. The Centre derives its revenues from a Parliamentary appropriation, donor contributions, and other sources. During the three months ended 30 June 2016, the ...

  19. Quarterly Financial Report for the period ending 31 December 2013

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sophie Comeau

    2013-12-31

    Dec 31, 2013 ... 4 IDRC QUARTERLY FINANCIAL REPORT DECEMBER 2013 the portion of the appropriation for the DIF ($33.4 million as at 31 December 2013 versus zero for the same period last year). Table 5 shows how the appropriation was used during the period ending 31 December 2013. TABLE 5: USE OF THE ...

  20. quarterly financial report for the period ending 31 December 2011

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sophie Comeau

    2011-12-31

    Dec 31, 2011 ... financial results and corporate updates of the International Development Research Centre. (IDRC, the Centre) for both the third quarter and the nine months ended 31 December 2011. This report was prepared as required under section 131.1 of the Financial Administration Act using the standard issued by ...

  1. Quarterly Financial Report for the period ending 30 September 2014

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    2014-09-30

    Sep 30, 2014 ... condensed interim financial statements (beginning on page 11). Disclosures and information presented in IDRC's Annual Report 2013-2014 apply to the current quarter unless otherwise indicated. Performance. Figure 1: FINANCIAL HIGHLIGHTS. (for the six months ended 30 September). 92.7. 97.6. 114.8.

  2. Quarterly Financial Report for the period ending 30 September 2015

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    2015-09-30

    Sep 30, 2015 ... 4 | QUARTERLY FINANCIAL REPORT FOR THE PERIOD 1 JULY TO 30 SEPTEMBER 2015. Consolidated overview. Revenues. TABLE 2: REVENUES. The Centre's revenues include the Parliamentary appropriation, donor contributions, and other sources (that include investment returns and other ...

  3. Quarterly Financial Report for the period ending 30 September 2013

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sophie Comeau

    2013-09-30

    Sep 30, 2013 ... 4 IDRC QUARTERLY FINANCIAL REPORT SEPTEMBER 2013 appropriation for the DIF ($11.7 million as at 30 September 2013 versus zero for the same period last year). Table 5 shows how the appropriation was used during the period ending 30 September 2013. TABLE 5: RECONCILIATION OF THE ...

  4. quarterly financial report for the period ending 30 September 2012

    International Development Research Centre (IDRC) Digital Library (Canada)

    acray

    2012-09-30

    Sep 30, 2012 ... Introduction. This Management's Discussion and Analysis (MD&A) provides a narrative discussion outlining the financial results and corporate updates of the International Development Research Centre. (IDRC, the Centre) for both the second quarter and the six months ended 30 September 2012.

  5. Quarterly Financial Report for the period ending 30 June 2015

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    2015-06-30

    Jun 30, 2015 ... 4 | IDRC'S QUARTERLY FINANCIAL REPORT — 1 April – 30 June 2015. TABLE 1: FINANCIAL HIGHLIGHTS. Consolidated overview. Revenues. TABLE 2: REVENUES. The Centre's revenues include the Parliamentary appropriation, donor contributions and other sources (that include investment returns ...

  6. Quarter Dates Location(s) Purpose Transportation and Travel ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC CRDI

    Location(s). Purpose. Transportation and Travel. Accommodation,. Meals and Other. Hospitality. Total. Expenses. Quarter 1. April 15 to 17. Ottawa, ON. Functions. April 24 to 28. London, England. Meeting. April 30 to May 1. Montreal, QC. Event. 7,540.72. 4,132.54. 408.14. 12,081.40. May 12 to 23. Ghana, Botswana, South ...

  7. Short-term energy outlook, October 1998. Quarterly projections, 1998 4. quarter

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The Energy Information Administration (EIA) prepares The Short-Term Energy Outlook (energy supply, demand, and price projections) monthly for distribution on the Internet at: www.eia.doe.gov/emeu/steo/pub/contents.html. In addition, printed versions of the report are available to subscribers in January, April, July and October. The forecast period for this issue of the Outlook extends from October 1998 through December 1999. Values for third quarter of 1998 data, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in EIA`s Weekly Petroleum Status Report) or are calculated from model simulations that use the latest exogenous information available (for example, electricity sales and generation are simulated by using actual weather data). The historical energy data, compiled in the October 1998 version of the Short-term Integrated Forecasting System (STIFS) database, are mostly EIA data regularly published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding.

  8. Results for the first quarter calendar year 2017 tank 50H salt solution sample

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, C. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-04-12

    In this memorandum, the chemical and radionuclide contaminant results from the First Quarter Calendar Year 2017 (CY17) sample of Tank 50H salt solution are presented in tabulated form. The First Quarter CY17 Tank 50H samples [a 200 mL sample obtained 6” below the surface (HTF-50-17-7) and a 1 L sample obtained 66” from the tank bottom (HTF-50-17-8)] were obtained on January 15, 2017 and received at Savannah River National Laboratory (SRNL) on January 16, 2017. Prior to obtaining the samples from Tank 50H, a single pump was run at least 4.4 hours and the samples were pulled immediately after pump shut down. All volatile organic analysis (VOA) and semi-volatile organic analysis (SVOA) were performed on the surface sample and all other analyses were performed on the variable depth sample. The information from this characterization will be used by Savannah River Remediation (SRR) for the transfer of aqueous waste from Tank 50H to the Saltstone Production Facility, where the waste will be treated and disposed of in the Saltstone Disposal Facility. This memorandum compares results, where applicable, to Saltstone Waste Acceptance Criteria (WAC) limits and targets. The chemical and radionuclide contaminant results from the characterization of the First Quarter CY17 sampling of Tank 50H were requested by SRR personnel and details of the testing are presented in the SRNL Task Technical and Quality Assurance Plan (TTQAP). This memorandum is part of Deliverable 2 from SRR request. Data pertaining to the regulatory limits for Resource Conservation and Recovery Act (RCRA) metals will be documented at a later time per the TTQAP for the Tank 50H saltstone task.

  9. Energy Programs at the Johns Hopkins University Applied Physics Laboratory, Quarterly Report, October-December 1980

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-12-01

    The Johns Hopkins University Applied Physics Laboratory is engaged in developing energy resources, utilization concepts, and monitoring and storage methods. This Quarterly Report summarizes the work on the various tasks as of 31 December 1980. The Energy Quarterly Report is divided into five sections. The first, Geothermal Energy Development Planning and Technical Assistance, supported by the Department of Energy/Division of Geothermal Energy (DOE/DGE), contains reports on the progress of geothermal-related tasks on which effort was concentrated during the quarter. The second section, Operational Research, Hydroelectric Power Development, supported by the Department of Energy/Resource Applications (DOE/RA), contains a report on institutional problems for small-scale hydroelectric power development in the southeastern states and a list of documents published by APL in the hydroelectric program and in the geothermal program, above. The third section, Seismotectonic Investigations, contains an article on work on the geologic structure of the Danbury Quadrangle that is supported by the Reactor Safety Research Division of the Nuclear Regulatory Commission (NRC) and an in-house supported study on a new method for assessing earthquakes in intraplate regions. The fourth section, Energy Conversion and Storage Techniques, contains four articles. The first is an evaluation of the Einstein refrigerator, supported by independent IR and D funds. The second concerns fly-wheel technology development at APL supported by the Department of Energy, Division of Energy Storage (DOE/STOR). The third is a report on APL energy conservation efforts at its own buildings, and the fourth is an article on liquefied natural gas (LNG) safety evaluation, supported by the National Academy of Sciences. The fifth section explores the value of establishing an Energy Research Institute at The Johns Hopkins University.

  10. Results For The Third Quarter Calendar Year 2016 Tank 50H Salt Solution Sample

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-10-13

    In this memorandum, the chemical and radionuclide contaminant results from the Third Quarter Calendar Year 2016 (CY16) sample of Tank 50H salt solution are presented in tabulated form. The Third Quarter CY16 Tank 50H samples (a 200 mL sample obtained 6” below the surface (HTF-5-16-63) and a 1 L sample obtained 66” from the tank bottom (HTF-50-16-64)) were obtained on July 14, 2016 and received at Savannah River National Laboratory (SRNL) on the same day. Prior to obtaining the samples from Tank 50H, a single pump was run at least 4.4 hours, and the samples were pulled immediately after pump shut down. The information from this characterization will be used by Defense Waste Processing Facility (DWPF) & Saltstone Facility Engineering for the transfer of aqueous waste from Tank 50H to the Saltstone Production Facility, where the waste will be treated and disposed of in the Saltstone Disposal Facility. This memorandum compares results, where applicable, to Saltstone Waste Acceptance Criteria (WAC) limits and targets. Data pertaining to the regulatory limits for Resource Conservation and Recovery Act (RCRA) metals will be documented at a later time per the Task Technical and Quality Assurance Plan (TTQAP) for the Tank 50H saltstone task. The chemical and radionuclide contaminant results from the characterization of the Third Quarter CY16 sampling of Tank 50H were requested by Savannah River Remediation (SRR) personnel and details of the testing are presented in the SRNL TTQAP.

  11. Consolidated Quarterly Report: Number of potential release sites subject to corrective action

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, John R.; Cochran, John R.

    2017-04-01

    This Sandia National Laboratories, New Mexico Environmental Restoration Operations (ER) Consolidated Quarterly Report (ER Quarterly Report) fulfills all quarterly reporting requirements set forth in the Resource Conservation and Recovery Act Facility Operating Permit and the Compliance Order on Consent. The 12 sites in the corrective action process are listed in Table I-1.

  12. A quarter Wheatstone bridge strain gage force transducer for recording gut motility.

    Science.gov (United States)

    Cowles, V E; Condon, R E; Schulte, W J; Woods, J H; Sillin, L F

    1978-10-01

    Quarter and half Wheatstone bridge extraluminal force transducers for recording of gastrointestinal motility are compared. Modification of the transducer to a quarter bridge is economical, simplifies construction, and improves longevity by eliminating the crossover wire which frequently short circuits. The quarter bridge transducer was found to be as accurate and sensitive as the half bridge transducer.

  13. Automated Array Assembly. Quarterly report No. 2

    Energy Technology Data Exchange (ETDEWEB)

    Williams, B.F.

    1976-06-01

    Analysis of the existing technologies applicable to solar module fabrication is nearing completion. One basic module whose manufacturing costs were derived from first principles is described. In this case, four basic cost analyses were made using a computerized cost analysis procedure. Excluding raw wafer cost, the estimated module processing cost per watt for the Ti/Ag evaporation metallization base case is about $2.40. An experimental thick-film Al screen-printing technique could reduce the cost to about $1.55/W. These estimates use a derived overall process yield of about 65 percent. (WDM)

  14. A Lemon Cell Battery for High-Power Applications

    Science.gov (United States)

    Muske, Kenneth R.; Nigh, Christopher W.; Weinstein, Randy D.

    2007-04-01

    This article discusses the development of a lemon cell battery for high-power applications. The target application is the power source of a dc electric motor for a model car constructed by first-year engineering students as part of their introductory course design project and competition. The battery is composed of a series of lemon juice cells made from UV vis cuvets that use a magnesium anode and copper cathode. Dilution of the lemon juice to reduce the rate of corrosion of the magnesium anode and the addition of table salt to reduce the internal resistance of the cell are examined. Although our specific interest is the use of this lemon cell battery to run an electric dc motor, high-power applications such as radios, portable cassette or CD players, and other battery-powered toys are equally appropriate for demonstration and laboratory purposes using this battery.

  15. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission Third Quarter 1983

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-01-01

    In the Third Quarter of 1983, the number of signed contracts and committed projects rose from 240 to 258, with a total estimated nominal capacity of these projects of 1,547 MW. Of this nominal capacity, about 416 MW is operational, and the balance is under contract for development. A map indicating the location of operational facilities under contract with PG and E is provided. Of the 258 signed contracts and committed projects, 83 were cogeneration, solid waste, or biomass projects with a potential of 779 MW. PG and E also had under active discussion 38 cogeneration projects that could generate a total of 797 MW to 848 MW, and 19 solid waste/biomass projects with a potential of 152 MW to 159 MW. Two contracts have been signed with geothermal projects, capable of producing 83 MW. There are 6 solar projects with signed contracts and a potential of 36 MW, as well as 3 solar projects under active discussion for 31 MW. Wind farm projects under contract number 21, with a generating capability of 528 MW. Also, discussions are being conducted with 17 wind farm projects, totaling 257 to 262 MW. There are 94 wind projects of 100 kW or less with signed contracts and a potential of almost 1 MW, as well as 8 other small wind projects under active discussion. There are 50 hydroelectric projects with signed contracts and a potential of 112 MW, as well as 67 projects under active discussion for 175 MW. In addition, there are 31 hydroelectric projects, with a nominal capacity of 185 MW, that PG and E is planning to construct.

  16. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission First Quarter 1984

    Energy Technology Data Exchange (ETDEWEB)

    None

    1984-01-01

    At the end of the First Quarter of 1984, the number of signed contracts and letter agreements for cogeneration and small power production projects was 322, with a total estimated nominal capacity of 2,643 MW. Of these totals, 215 projects, capable of producing 640 MW, are operational. A map indicating the location of operational facilities under contract with PG and E is provided. Developers of cogeneration, solid waste, or biomass projects had signed 110 contracts with a potential of 1,467 MW. In total, 114 contracts and letter agreements had been signed with projects capable of producing 1,508 MW. PG and E also had under active discussion 35 cogeneration projects that could generate a total of 425 MW to 467 MW, and 11 solid waste or biomass projects with a potential of 94 MW to 114 MW. One contract had been signed for a geothermal project, capable of producing 80 MW. There were 7 solar projects with signed contracts and a potential of 37 MW, as well as 5 solar projects under active discussion for 31 MW. Wind farm projects under contract numbered 32, with a generating capability of 848 MW. Also, discussions were being conducted with 18 wind farm projects, totaling 490 MW. There were 101 wind projects of 100 kW or less with signed contracts and a potential of 1 MW, as well as 6 other small wind projects under active discussion. There were 64 hydroelectric projects with signed contracts and a potential of 148 MW, as well as 75 projects under active discussion for 316 MW. In addition, there were 31 hydroelectric projects, with a nominal capacity of 187 MW, that Pg and E was planning to construct.

  17. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission Second Quarter 1983

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-01-01

    In the Second Quarter of 1983, the number of signed contracts and committed projects rose from 223 to 240, with a total estimated nominal capacity of these projects of 1,449 MW. Of this nominal capacity, about 361 MW is operational, and the balance is under contract for development. A map indicating the location of currently operating facilities is provided as Figure A. Of the 240 signed contracts and committed projects, 75 were cogeneration, solid waste, or biomass projects with a potential of 740 MW. PG and E also had under active discussion 32 cogeneration projects that could generate a total of 858 MW to 921 MW, and 10 solid waste/biomass projects with a potential of 113 MW to 121 MW. Two contracts have been signed with geothermal projects, capable of producing 83 MW. There are 6 solar projects with signed contracts and a potential of 36 MW, as well as another solar project under active discussion for 30 MW. Wind farm projects under contract number 19, with a generating capability of 471 MW. Also, discussions are being conducted with 12 wind farm projects, totaling 273 to 278 MW. There are 89 wind projects of 100 kW or less with signed contracts and a potential of almost 1 MW, as well as 10 other projects under active discussion. There are 47 hydroelectric projects with signed contracts and a potential of 110 MW, as well as 65 projects under active discussion for 175 MW. In addition, there are 30 hydroelectric projects, with a nominal capacity of 291 MW, that PG and E is constructing or planning to construct. Table A displays the above information. In tabular form, in Appendix A, are status reports of the projects as of June 30, 1983.

  18. Technical data base quarterly report, April--June 1992; Yucca Mountain Site Characterization Project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-09-01

    The acquisition and development of technical data are activities that provide the information base from which the Yucca mountain Site will be characterized and may P-ventually be licensed as a high-level waste repository. The Project Technical Data Base (TDB) is the repository for the regional and site-specific technical data required in intermediate and license application analyses and models. The TDB Quarterly Report provides the mechanism for identifying technical data currently available from the Project TDB. Due to the variety of scientific information generated by YMP activities, the Project TDB consists of three components, each designed to store specific types of data. The Site and Engineering Properties Data Base (SEPDB) maintains technical data best stored in a tabular format. The Geographic Nodal Information Study and Evaluation System (GENISES), which is the Geographic Information System (GIS) component of the Project TDB, maintains spatial or map-like data. The Geologic and Engineering Materials Bibliography of Chemical Species (GEMBOCHS) data base maintains thermodynamic/geochemical data needed to support geochemical reaction models involving the waste package and repository geochemical environment. Each of these data bases are addressed independently within the TDB Quarterly Report.

  19. Steam pretreatment for coal liquefaction. Sixth quarterly report, 1 January 1992--31 March 1992

    Energy Technology Data Exchange (ETDEWEB)

    Graff, R.A.; Balogh-Nair, V.

    1992-06-28

    Steam pretreatment is the reaction of coal with steam at temperatures well below those usually used for solubilization. The objective of the proposed work is to test the application of steam pretreatment to coal liquefaction. Conversion of the autoclave apparatus to rapid heating liquefaction was carried out this quarter following redesign of the coal slurry injection system. The modified equipment and procedure was tested in a simulated liquefaction run without coal. Initial tests of slurried {minus}20 mesh coal showed too rapid settling for successful operation. Coal ground to pass 200 mesh proved suitable, and a impact grinder was put into operation to grind the material under an inert atmosphere. A batch of Illinois No. 6 coal for the, first rapid heating liquefaction tests has been prepared and stored under inert gas. The steam pretreatment of {alpha}-benzylnaphthyl ether was carried out using stainless steel and glass lined reactors. A preparative scale procedure for product separation was developed. The major components were identified and the average product distribution determined for both types of reactors. Pretreatment of {alpha}-naphthylmethyl phenyl ether was also carried out using stainless steel and glass-lined reactors. Separation and analysis of the products has been started. The major components have been identified. Analyses and identification of the components will be continued next quarter.

  20. Federal assistance program. Quarterly project progress report, January 1998--March 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    This report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the second quarter of FY-98-98 (January-March, 1998). It describes 268 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include requests for general information including maps and material for high school debates, and material on geothermal heat pumps, resource and well data, spacing heating and cooling, greenhouses, aquaculture, equipment, district heating, resorts and spas, industrial applications, electric power and snow melting. Research activities include work on model construction specifications for line shaft submersible pumps and plate heat exchangers and a comprehensive aquaculture developer package. The revised Geothermal Direct Use Engineering and Design Guidebooks was completed, published and is available for distribution. Outreach activities include the publication of the Quarterly Bulletin (Vol. 19, No. 1) which was devoted entirely to geothermal equipment, dissemination of information mainly through mailings of publications, tours of local geothermal uses, geothermal library acquisitions and use, participation in workshops, short courses and technical meetings by the staff, and progress monitor reports on geothermal activities.

  1. Geothermal direct-heat utilization assistance. Quarterly progress report, January--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    Lienau, P.

    1993-03-30

    CHC (Geo-Heated Center) staff provided assistance to 103 requests from 26 states, and from Canada, Egypt, Mexico, China, Poland and Greece. A breakdown of the requests according to application include: space and district heating (19), geothermal heat pumps (24), greenhouses (10), aquaculture (4), industrial (4), equipment (3), resources (27), electric power (2) and other (20). Progress is reported on: (1) evaluation of lineshaft turbine pump problems, (2) pilot fruit drier and (3) geothermal district heating marketing tools and equipment investigation. Four presentations and two tours were conducted during the quarter, GHC Quarterly Bulletin Vol. 14, No. 4 was prepared, 14 volumes were added to the library and information was disseminated to 45 requests. Progress reports are on: (1) GHP Teleconference 93, (2) California Energy Buys Glass Mountain Prospect from Unocal and Makes Deal for Newberry Caldera, (3) New Power Plant Planned, (4) Vale to Get Power Plant, (5) BPA Approves Geothermal Project, (6) Update: San Bernardino Reservoir Study, (7) Twenty-nine Palms Geothermal Resources, (8) Geo-Ag Heat Center, Lake County, and (9) Update: Geothermal Wells at Alturas.

  2. Beam steering in superconducting quarter-wave resonators: An analytical approach

    Directory of Open Access Journals (Sweden)

    Alberto Facco

    2011-07-01

    Full Text Available Beam steering in superconducting quarter-wave resonators (QWRs, which is mainly caused by magnetic fields, has been pointed out in 2001 in an early work [A. Facco and V. Zviagintsev, in Proceedings of the Particle Accelerator Conference, Chicago, IL, 2001 (IEEE, New York, 2001, p. 1095], where an analytical formula describing it was proposed and the influence of cavity geometry was discussed. Since then, the importance of this effect was recognized and effective correction techniques have been found [P. N. Ostroumov and K. W. Shepard, Phys. Rev. ST Accel. Beams 4, 110101 (2001PRABFM1098-440210.1103/PhysRevSTAB.4.110101]. This phenomenon was further studied in the following years, mainly with numerical methods. In this paper we intend to go back to the original approach and, using well established approximations, derive a simple analytical expression for QWR steering which includes correction methods and reproduces the data starting from a few calculable geometrical constants which characterize every cavity. This expression, of the type of the Panofski equation, can be a useful tool in the design of superconducting quarter-wave resonators and in the definition of their limits of application with different beams.

  3. Geothermal direct-heat utilization assistance. Quarterly project progress report, October--December 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report summarizes geothermal technical assistance, R and D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the first quarter of FY-98 (October--December 1997). It describes 216 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include requests for general information including maps and material for high school debates, and material on geothermal heat pumps, resource and well data, space heating and cooling, greenhouses, aquaculture, equipment, district heating, resorts and spas, industrial applications, electric power and snow melting. Research activities include work on model construction specifications of lineshaft submersible pumps and plate heat exchangers, a comprehensive aquaculture developer package and revisions to the Geothermal Direct Use Engineering and Design Guidebook. Outreach activities include the publication of the Quarterly Bulletin (Vol. 18, No. 4) which was devoted entirely to geothermal activities in South Dakota, dissemination of information mainly through mailings of publications, tours of local geothermal uses, geothermal library acquisition and use, participation in workshops, short courses and technical meetings by the staff, and progress monitor reports on geothermal activities.

  4. Diagnostic systems of electric motors in real time

    Directory of Open Access Journals (Sweden)

    В.Ю. Кучерук

    2007-01-01

    Full Text Available  Thesis is devoted to development and research of system of electromotor diagnosis, which is working on increasing angular velocity. The methods of electromotor diagnosis with complexly taking into account faults by special testing and continuous inspection based on neural-fuzzy methods are developed. Based on offered methods formed hardware and software, which are used in developed system of electromotor diagnosis. The analog neuralcontroller using is offered. The main preferences of such approach are accuracy and speed of diagnoses receiving due to data processing with analog measurement channel.

  5. An Evaluation of Electric Motors for Ship Propulsion

    Science.gov (United States)

    2003-06-01

    22 C. TYPES OF PMSM ...nous Machines (FWSM), 2) Squirrel Cage Induction Machines (SCIM), 3) Permanent Magnet Synchronous Machines ( PMSM ), and 4) High Temperature...Superconducting AC Synchronous Machines (HTSAC) [3]. The SCIM, PMSM , and HTSAC motors will be discussed and their qualities and shortcomings will be compared

  6. Cooling of Electric Motors Used for Propulsion on SCEPTOR

    Science.gov (United States)

    Christie, Robert; Dubois, Authur; Derlaga, Joseph

    2016-01-01

    Benefits of Electric Power: Reduced energy consumption, Lower emissions, Less noise. Traction motors: Permanent magnet, Synchronous, High torque at low rotational speeds, High power density, (High concentration of heat). Annular inlet: Very compatible with PM motors, (Provides cooling where needed, No need for complicated ducting, Leads to a larger motor diameter which is beneficial for motor torque) Effect of prop wash on heat transfer coefficients: Assumed propeller induced turbulence would increase heat transfer coefficients, Holmes, Obara Yip reported 'propeller slipstream showed little if any apparent effect of the slip stream', Derlaga @ LaRC also found little change in heat transfer in the wake of the propeller.

  7. Optimization of Flexible Assembly Systems for Electrical Motors

    OpenAIRE

    Bruqi, Mirlind; Likaj, Ramë; Kaqani, Jorgaq

    2012-01-01

    Part 2: Design, Manufacturing and Production Management; International audience; The modern assembly systems are fully integrated production systems. They consist of interconnected components of hardware and software. Large flexible assembly systems are being composed of high number of components and managing requires an enormous volume of data. For that reason the controlling and optimization of such systems is too complex. Nowadays that can achieved, using just computers and software tools....

  8. Natural gas imports and exports. First quarter report 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    The Office of Natural Gas and Petroleum Import and Export Activities prepares quarterly reports summarizing the data provided by companies authorized to import or export natural gas. Attachment A shows the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the five most recent reporting quarters. Attachment B shows volumes and prices of gas purchased by long-term importers and exporters during the past 12 months. Attachment C shows volume and price information pertaining to gas imported on a short-term or spot market basis. Attachment D shows the gas exported on a short-term or spot market basis to Canada and Mexico. 14 figs., 9 tabs.

  9. Natural gas imports and exports. Third quarter report 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This quarterly report, prepared by The Office of Natural Gas and Petroleum Import and Export Activities, summarizes the data provided by companies authorized to import or export natural gas. Numerical data are presented in four attachments, each of which is comprised of a series of tables. Attachment A shows the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the five most recent calendar quarters. Volumes and prices of gas purchased by long-term importers and exporters during the past year are given in Attachment B. Attachment C shows volume and price information pertaining to gas imported on a short-term or spot market basis. Attachment D lists gas exported on a short-term or spot market basis to Canada and Mexico. Highlights of the report are very briefly summarized.

  10. New achromatic quarter-wave combination of birefringent plates

    Science.gov (United States)

    Saha, Arijit; Bhattacharya, Kallol; Chakraborty, Ajoy Kumar

    2012-01-01

    Phase retarders usually exhibit strong wavelength dependence. For this paper, the design and characteristics of an achromatic cascaded system of birefringent plates were studied. The combination of three retarders in a series had been previously proposed by Pancharatnam, and he discussed the possibility of fabricating reasonably good achromatic quarter-wave plates with a suitable level of retardance. This combination, however, still shows substantial variation in terms of retardance within 500 to 700 nm. Here, the combination of four plates for the construction of an almost achromatic quarter-wave plate, which has a variation of only +/- 1 degree over the wavelength spectrum of 500 to 700 nm, is proposed. Moreover, spherical trigonometric considerations have been used by Pancharatnam for obtaining the transmission characteristics of a cascaded system. We, however, used the succinct and relatively simple Jones matrix formalism to derive a general expression for the equivalent retardation of this combination. The proposed arrangement of four birefringent plates promises better achromatic combinations.

  11. NEPA Project quarterly progress report, April 1--June 30, 1950

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1950-12-31

    Exploration of various types of power plant cycles for nuclear propelled aircraft has been continued during this quarter. The principal current objective of the project is the development of information which will make an intelligent choice of the basic power plant cycle possible. It is still hoped that this choice can be made late in 1950. The survey studies which have been under way for several months continued during the quarter. These consist of analyses and rough preliminary layouts for various types of aircraft, using each of the several basic cycles which have been seriously considered for each of the three phases of development. Although it is still extremely premature to discuss the relative merits of the various cycles, the information so for developed discloses some cycle differences which may, if confirmed by additional work, be significant. In this respect, there have been no recent major changes in the comparative standings of the cycles.

  12. Broadband infrared meanderline reflective quarter-wave plate.

    Science.gov (United States)

    Wadsworth, Samuel L; Boreman, Glenn D

    2011-05-23

    We present a novel reflective quarter-wave plate comprised of subwavelength meanderline elements. The device is operational over the long-wave infrared (LWIR) spectrum, with significant spectral and angular bandwidths. Power reflection is approximately 70% over the majority of the LWIR. Efficient conversion from a 45° linear polarization state into circular polarization is demonstrated from finite-element electromagnetic simulations and from broadband polarimetric measurements.

  13. Lameness diagnosis and treatment in the quarter horse racehorse.

    Science.gov (United States)

    Goodman, N L; Baker, B K

    1990-04-01

    Lameness problems constitute a major part of racing Quarter Horse practice. This article considers the diagnosis, prognosis, and treatment of the frequently encountered lamenesses. The main conditions included are synovitis, intra-articular fractures, osteochondritis dissecans, and degenerative joint disease as they relate to the coffin, fetlock, carpal, and tarsal joints. Intra-articular injection techniques and medications are discussed because of the frequency of joint disease. Bucked shins and stress fractures are also reviewed.

  14. Strategic Studies Quarterly. Volume 6, Number 2. Summer 2012

    Science.gov (United States)

    2012-06-01

    methicillin-resistant Staphylococcus aureus. Staph is a very common infection—the National Institutes of Health says that a quarter of us in this...room have a staph infection right now, usually living harmlessly on our skin or in our nasal passages. Staph is the cause of many runny noses and sore...throats every winter and can cause impetigo and arthritis if it gets under the skin. Because it is so common, staph has developed resistance to

  15. Environmental surveillance data report for the third quarter of 1986

    Energy Technology Data Exchange (ETDEWEB)

    1986-11-01

    During the third quarter of 1986, over 1900 samples which represent over 6700 analyses and measurements were collected by the Department of Environmental Management. Eleven real-time air monitoring stations which telemeter 10-minute averaged readings on radiation levels and total rainfall around ORNL also reported data. Three real-time water monitoring stations that transmit flow and water quality data were put into operation. The /sup 131/I concentrations in air and milk which were significantly elevated during the second quarter by the Chernobyl nuclear incident have returnted to normal. When compared to the second quarter, no significant differences were observed in the average concentrations of /sup 90/Sr in milk and air in the immediate Oak Ridge and remote areas. Greater than 80% of the tritium discharges over White Oak Dam could be attributed to the releases into Melton Branch. Tritium discharges in this area are believed to be due primarily to releases from Solid Waste Storage Area 5. Groundwater samples from four deep wells around the ORNL surface impoundment areas 3524, 3539-40, and 7900 were also collected during this quarter. The sampling is required by the Tennessee Department of Health and Environment under interim status provisions for RCRA facilities. Further sampling of these sites will be determined based on an evaluation of the first year data. The groundwater wells in SWSAs 4, 5, and 6, and the pits and trenches areas were also analyzed for radionuclides. Bluegill were collected from Clinch River Miles 5.0, 20.8, and 25 and analyzed for radionuclides. In addition, fish from CRM 20.8 and 25.0 were analyzed for mercury and PCBs. The highest concentrations of constituents were in fish collected from CRM 20.8 which is at ORNL's discharge point. The concentrations of mercury and PCBs in fish were lower than the limits set by the Food and Drug Administration. 21 figs., 31 tabs.

  16. Bovine udder quarter milk in relation to somatic cell count

    OpenAIRE

    Forsbäck, Linda

    2010-01-01

    The dairy industry requires raw milk of high quality in order to produce milk products of high quality and quantity. Mastitis is one of the most prevalent and economically important production diseases in dairy cattle. It causes increased somatic cell count (SCC), deteriorated milk composition and consequently altered processing properties of milk. Altered milk composition due to mastitis often occurs in only one of the four udder quarters of the cow. Milk with high SCC and deteriorated milk ...

  17. LLNL FY10 Greenhouse Gas Inventory - Quarters 1 and 3

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, C. Susi [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2010-09-29

    This report only represents LLNL’s GHG emissions for the first three quarters of FY10 as agreed upon by Karin King, Livermore Site Office, to be followed by a full report for FY10 by the end of November. This report represents calculations based on the best data available at this time and will be revised as necessary to accommodate either changes in guidance or data quality.

  18. NREL PV working with industry, Third quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    Moon, S.; Cook, G.

    1998-12-04

    This quarterly report encourages cooperative R and D by providing the US PV industry with information on activities and capabilities of the laboratories. This issue contains information on the CIS and CdTe R and D teams, an editorial by Richard King on the stand-out accomplishments of the PV Program, and an overview of the NCPV Program Review Meeting highlighting the strength of US photovoltaics.

  19. Sanitary landfill groundwater monitoring report. First Quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This report contains analytical data for samples taken during first quarter 1994 from wells of the LFW series located at the Sanitary Landfill Operating permit (DWP-0874A). The report presents monitoring results that equaled or exceeded the Safe Drinking Water Act final Primary Drinking Water Standards (PDWS) or screening levels, established by the US Environmental Protection Agency, the South Carolina final Primary Drinking Water Standard for lead, or the SRS flagging criteria.

  20. Sanitary Landfill Groundwater Monitoring Report (Data Only) - First Quarter 1999

    Energy Technology Data Exchange (ETDEWEB)

    Chase, J.

    1999-05-26

    This report contains analytical data for samples taken during First Quarter 1999 from wells of the LFW series located at the Sanitary Landfill at the Savannah River Site (SRS). This report presents monitoring results that equaled or exceeded the Safe Drinking Water Act final Primary Drinking Water Standards or screening levels, established by the U.S. Environmental Proteciton Agency, the South Carolina final Primary Drinking Water Standard for lead, or the SRS flagging criteria.

  1. Solar Electricity: The Power of Choice, Second Quarter 2001

    Energy Technology Data Exchange (ETDEWEB)

    Moon, S.; Cook, G.; Schnelten, K.

    2001-08-14

    Solar Electricity - The Power of Choice (formerly NREL PV Working With Industry) is a quarterly newsletter devoted to the photovoltaics (PV) research and development activities performed by NREL staff in concert with their industry and university partners. This issue is devoted to demonstrating that PV R and D is a valuable investment for the United States. The editorialist for this issue is Larry Kazmerski, director of the National Center for Photovoltaics.

  2. Traditional medicine and child health | Grange | Nigerian Quarterly ...

    African Journals Online (AJOL)

    No Abstract. Nigerian Quarterly Journal of Hospital Medicine Vol. 11(1-4) 2001: 51-53. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · http://dx.doi.org/10.4314/nqjhm.v11i1.12526 · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians ...

  3. Solar Electricity: The Power of Choice, Third Quarter 2001

    Energy Technology Data Exchange (ETDEWEB)

    Schnelten, K.; Moon, S.; Miller, J.

    2001-12-01

    Solar Electricity: The Power of Choice (formerly NREL PV Working With Industry) is a quarterly newsletter devoted to the photovoltaics (PV) research and development activities performed by NREL staff in concert with their industry and university partners. This issue is devoted to coverage of the Program Review Meeting of the National Center for Photovoltaics, held in October, 2001. The editorialist for this issue is Kannan Ramanathan, chair of the Program Review and a research scientist with the National Center for Photovoltaics at NREL.

  4. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission. Second Quarter 1984

    Energy Technology Data Exchange (ETDEWEB)

    None

    1984-01-01

    At the end of the Second Quarter of 1984, the number of signed contracts and letter agreements for cogeneration and small power production projects was 334, with total estimated nominal capacity of 2,876 MW. Of these totals, 232 projects, capable of producing 678 MW, are operational (Table A). A map indicating the location of operational facilities under contract with PG and E is provided as Figure A. Developers of cogeneration projects had signed 80 contracts with a potential of 1,161 MW. Thirty-three contracts had been signed for solid waste/biomass projects for a total of 298 MW. In total, 118 contracts and letter agreements had been signed with cogeneration, solid waste, and biomass projects capable of producing 1,545 MW. PG and E also had under active discussion 46 cogeneration projects that could generate a total of 688 MW to 770 MW, and 13 solid waste or biomass projects with a potential of 119 MW to 139 MW. One contract had been signed for a geothermal project, capable of producing 80 MW. Two geothermal projects were under active discussion for a total of 2 MW. There were 8 solar projects with signed contracts and a potential of 37 MW, as well as 4 solar projects under active discussion for 31 MW. Wind farm projects under contract numbered 34, with a generating capability of 1,042 MW, Also, discussions were being conducted with 23 wind farm projects, totaling 597 MW. There were 100 wind projects of 100 kW or less with signed contracts and a potential of 1 MW, as well as 7 other small wind projects under active discussion. There were 71 hydroelectric projects with signed contracts and a potential of 151 MW, as well as 76 projects under active discussion for 505 MW. In addition, there were 18 hydroelectric projects, with a nominal capacity of 193 MW, that PG and E was planning to construct. Table B displays the above information. Appendix A displays in tabular form the status reports of the projects as of June 30, 1984.

  5. 3rd Quarter Transportation Report FY 2014: Radioactive Waste Shipments to and from the Nevada National Security Site (NNSS)

    Energy Technology Data Exchange (ETDEWEB)

    Gregory, Louis [National Security Technologies, LLC. (NSTec), Mercury, NV (United States)

    2014-09-20

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the 3rd quarter of Fiscal Year (FY) 2014 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. This report also includes annual summaries for FY 2014 in Tables 4 and 5. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report do not include minor volumes of non-radioactive materials that were approved for disposal. Volume reports showing cubic feet generated using the Low-Level Waste Information System may vary slightly due to differing rounding conventions.

  6. 1st Quarter Transportation Report FY 2015: Radioactive Waste Shipments to and from the Nevada National Security Site (NNSS)

    Energy Technology Data Exchange (ETDEWEB)

    Gregory, Louis [National Security Technologies, LLC, Las Vegas, NV (United States)

    2015-02-20

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to and from the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the 1st quarter of Fiscal Year (FY) 2015 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report include minor volumes of non-radioactive classified waste/material that were approved for disposal (non-radioactive classified or nonradioactive classified hazardous). Volume reports showing cubic feet generated using the Low-Level Waste Information System may vary slightly due to rounding conventions for volumetric conversions from cubic meters to cubic feet.

  7. 76 FR 5811 - Adjusted Federal Medical Assistance Percentage (FMAP) Rate for the First Quarter of Fiscal Year...

    Science.gov (United States)

    2011-02-02

    ... unemployment rate from the calendar quarter ending before July 1, 2010 to the calendar quarter ending before... last two quarters of the extended recession adjustment period, and changed the look back period for calculating the unemployment adjustment for those quarters, which will be addressed in a future Notice. DATES...

  8. Natural Gas Imports and Exports. Third Quarter Report 1999

    Energy Technology Data Exchange (ETDEWEB)

    none

    1999-10-01

    The second quarter 1997 Quarterly Report of Natural Gas Imports and Exports featured a Quarterly Focus report on cross-border natural gas trade between the United States and Mexico. This Quarterly Focus article is a follow-up to the 1997 report. This report revisits and updates the status of some of the pipeline projects discussed in 1997, and examines a number of other planned cross-border pipeline facilities which were proposed subsequent to our 1997 report. A few of the existing and proposed pipelines are bidirectional and thus have the capability of serving either Mexico, or the United States, depending on market conditions and gas supply availability. These new projects, if completed, would greatly enhance the pipeline infrastructure on the U.S.-Mexico border and would increase gas pipeline throughput capacity for cross-border trade by more than 1 billion cubic feet (Bcf) per day. The Quarterly Focus is comprised of five sections. Section I includes the introduction as well as a brief historic overview of U.S./Mexican natural gas trade; a discussion of Mexico's energy regulatory structure; and a review of trade agreements and a 1992 legislative change which allows for her cross-border gas trade in North America. Section II looks at initiatives that have been taken by the Mexican Government since 1995to open its energy markets to greater competition and privatization. Section III reviews Mexican gas demand forecasts and looks at future opportunities for U.S. gas producers to supplement Mexico's indigenous supplies in order to meet the anticipated rapid growth in demand. Section IV examines the U.S.-Mexico natural gas trade in recent years. It also looks specifically at monthly import and export volumes and prices and identifies short-term trends in this trade. Finally, Section V reviews the existing and planned cross-border gas pipeline infrastructure. The section also specifically describes six planned pipelines intended to expand this pipeline

  9. Third Quarter Hanford Seismic Report for Fiscal Year 2010

    Energy Technology Data Exchange (ETDEWEB)

    Rohay, Alan C.; Sweeney, Mark D.; Hartshorn, Donald C.; Clayton, Ray E.; Devary, Joseph L.

    2010-09-29

    The Hanford Seismic Assessment Program (HSAP) provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network for the U.S. Department of Energy and its contractors. The HSAP is responsible for locating and identifying sources of seismic activity and monitoring changes in the historical pattern of seismic activity at the Hanford Site. The data are compiled, archived, and published for use by the Hanford Site for waste management, natural phenomena hazards assessments, and engineering design and construction. In addition, the HSAP works with the Hanford Site Emergency Services Organization to provide assistance in the event of a significant earthquake on the Hanford Site. The Hanford Seismic Network and the Eastern Washington Regional Network consist of 44 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Assessment Team. The Hanford Seismic Network recorded 23 local earthquakes during the third quarter of FY 2010. Sixteen earthquakes were located at shallow depths (less than 4 km), five earthquakes at intermediate depths (between 4 and 9 km), most likely in the pre-basalt sediments, and two earthquakes were located at depths greater than 9 km, within the basement. Geographically, twelve earthquakes were located in known swarm areas, 3 earthquakes occurred near a geologic structure (Saddle Mountain anticline), and eight earthquakes were classified as random events. The highest magnitude event (3.0 Mc) was recorded on May 8, 2010 at depth 3.0 km with epicenter located near the Saddle Mountain anticline. Later in the quarter (May 24 and June 28) two additional earthquakes were also recorded nearly at the same location. These events are not considered unusual in that earthquakes have been previously recorded at this location, for example, in October 2006 (Rohay et al; 2007). Six earthquakes were detected in the vicinity of Wooded Island, located about eight miles north of Richland just

  10. Quarterly Report: Microchannel-Assisted Nanomaterial Deposition Technology for Photovoltaic Material Production

    Energy Technology Data Exchange (ETDEWEB)

    Palo, Daniel R.

    2011-04-26

    Quarterly report to ITP for Nanomanufacturing program. Report covers FY11 Q2. The primary objective of this project is to develop a nanomanufacturing process which will reduce the manufacturing energy, environmental discharge, and production cost associated with current nano-scale thin-film photovoltaic (PV) manufacturing approaches. The secondary objective is to use a derivative of this nanomanufacturing process to enable greener, more efficient manufacturing of higher efficiency quantum dot-based photovoltaic cells now under development. The work is to develop and demonstrate a scalable (pilot) microreactor-assisted nanomaterial processing platform for the production, purification, functionalization, and solution deposition of nanomaterials for photovoltaic applications. The high level task duration is shown. Phase I consists of a pilot platform for Gen II PV films along with parallel efforts aimed at Gen III PV quantum dot materials. Status of each task is described.

  11. Low-rank coal research. Quarterly report, January--March 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-08-01

    This document contains several quarterly progress reports for low-rank coal research that was performed from January-March 1990. Reports in Control Technology and Coal Preparation Research are in Flue Gas Cleanup, Waste Management, and Regional Energy Policy Program for the Northern Great Plains. Reports in Advanced Research and Technology Development are presented in Turbine Combustion Phenomena, Combustion Inorganic Transformation (two sections), Liquefaction Reactivity of Low-Rank Coals, Gasification Ash and Slag Characterization, and Coal Science. Reports in Combustion Research cover Fluidized-Bed Combustion, Beneficiation of Low-Rank Coals, Combustion Characterization of Low-Rank Coal Fuels, Diesel Utilization of Low-Rank Coals, and Produce and Characterize HWD (hot-water drying) Fuels for Heat Engine Applications. Liquefaction Research is reported in Low-Rank Coal Direct Liquefaction. Gasification Research progress is discussed for Production of Hydrogen and By-Products from Coal and for Chemistry of Sulfur Removal in Mild Gas.

  12. Supercritical fluid thermodynamics for coal processing: Quarterly progress report, September 15, 1988--December 31, 1988

    Energy Technology Data Exchange (ETDEWEB)

    Eckert, C. A.

    1988-01-01

    Because of their unusual solvating and mass transfer properties, supercritical fluids show potential for a variety of coal processing applications. To establish a database of coal model compound equilibria, this quarter we have measured the solubility of 5,6-dimethyl-benzimidazole and anthraquinone in supercritical butane. In addition, we have used fluorescence spectroscopy to study the nature of the intermolecular interactions in the systems of pyrene and naphthalene in supercritical CO/sub 2/, C/sub 2/H/sub 4/, and CF/sub 3/H. The spectroscopy measurements are being used to guide the development of an equation of state that can be used to predict the solubility behavior so systems can be designed for the processing of coal with supercritical fluids. 4 figs.

  13. Supercritical fluid thermodynamics for coal processing: Quarterly progress report, January 1, 1989--March 31, 1989

    Energy Technology Data Exchange (ETDEWEB)

    Eckert, C. A.

    1989-01-01

    Because of their unusual solvating and mass transfer properties, supercritical fluids show potential for a variety of coal processing applications. To establish a database of coal model compound equilibria, this quarter we have measured the solubility of phenanthrenequinone in supercritical butane. In addition, we have used fluorescence spectroscopy to study the nature of the intermolecular interactions in the systems of dibenzofuran and thianthrene in supercritical CO/sub 2/ and C/sub 2/H/sub 4/. The spectroscopy measurements are being used to guide the development of an equation of state that can be used to predict the solubility behavior so systems can be designed for the processing of coal with supercritical fluids. 3 figs.

  14. Energy conservation via heat transfer enhancement. Quarterly progress report, January 1-March 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Bergles, A.E.; Junkhan, G.H.; Webb, R.L.

    1979-06-01

    This report for the first quarter of 1979 summarizes visits and contacts relative to the theory and practice of heat transfer enhancement. The Technical Literature File and Manufacturers' File were expanded, and the initial Patent Technology Information File was completed. Application studies on enhancement of waste heat recuperators and laminar internal flow heat transfer are described. A comprehensive bibliography on laminar flow enhancement is included. The Technology study on performance of internally finned tubes is complete. New data for the heat transfer and friction characteristics of internally finned tubes will be analyzed to develop rationally based correlations. An assessment of natural convection from rough surfaces was performed. Major effort was directed toward planning of the Research Workshop on Energy Conservation Through Enhanced Heat Transfer. The Workshop, scheduled for May 24 and May 25, 1979 in Chicago, will be co-sponsored by NSF.

  15. Exact analytical representations for broadband transmission properties of quarter-wave multilayers.

    Science.gov (United States)

    Grigoriev, Victor; Biancalana, Fabio

    2011-10-01

    The formalism of the scattering matrix is applied to describe the transmission properties of multilayered structures with deep variations of the refractive index and arbitrary arrangements of the layers. We show that there is an exact analytical formula for the transmission spectrum, which is valid for the full spectral range and which contains only a limited number of parameters for structures satisfying the quarter-wave condition. These parameters are related to the poles of the scattering matrix, and we present an efficient algorithm to find them, which is based on considering the ray propagation inside the structure and subsequent application of the harmonic inversion technique. These results are significant for analyzing the reshaping of ultrashort pulses in multilayered structures. © 2011 Optical Society of America

  16. HYBRID SULFUR ELECTROLYZER DEVELOPMENT FY09 SECOND QUARTER REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Herman, D; David Hobbs, D; Hector Colon-Mercado, H; Timothy Steeper, T; John Steimke, J; Mark Elvington, M

    2009-04-15

    The primary objective of the DOE-NE Nuclear Hydrogen Initiative (NHI) is to develop the nuclear hydrogen production technologies necessary to produce hydrogen at a cost competitive with other alternative transportation fuels. The focus of the NHI is on thermochemical cycles and high temperature electrolysis that can be powered by heat from high temperature gas reactors. The Savannah River National Laboratory (SRNL) has been tasked with the primary responsibility to perform research and development in order to characterize, evaluate and develop the Hybrid Sulfur (HyS) thermochemical process. This report documents work during the first quarter of Fiscal Year 2009, for the period between January 1, 2009 and March 31, 2009. The HyS Process is a two-step hybrid thermochemical cycle that is part of the 'Sulfur Family' of cycles. As a sulfur cycle, it uses high temperature thermal decomposition of sulfuric acid to produce oxygen and to regenerate the sulfur dioxide reactant. The second step of the process uses a sulfur dioxide depolarized electrolyzer (SDE) to split water and produce hydrogen by electrochemically reacting sulfur dioxide with H{sub 2}O. The SDE produces sulfuric acid, which is then sent to the acid decomposer to complete the cycle. The DOE NHI program is developing the acid decomposer at Sandia National Laboratory for application to both the HyS Process and the Sulfur Iodine Cycle. The SDE is being developed at SRNL. During FY05 and FY06, SRNL designed and conducted proof-of-concept testing for a SDE using a low temperature, PEM fuel cell-type design concept. The advantages of this design concept include high electrochemical efficiency, small footprint and potential for low capital cost, characteristics that are crucial for successful implementation on a commercial scale. During FY07, SRNL extended the range of testing of the SDE to higher temperature and pressure, conducted a 100-hour longevity test with a 60-cm{sup 2} single cell electrolyzer

  17. NEAMS Update. Quarterly Report for October - December 2011.

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, K. (Nuclear Engineering Division)

    2012-02-16

    The Advanced Modeling and Simulation Office within the DOE Office of Nuclear Energy (NE) has been charged with revolutionizing the design tools used to build nuclear power plants during the next 10 years. To accomplish this, the DOE has brought together the national laboratories, U.S. universities, and the nuclear energy industry to establish the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program. The mission of NEAMS is to modernize computer modeling of nuclear energy systems and improve the fidelity and validity of modeling results using contemporary software environments and high-performance computers. NEAMS will create a set of engineering-level codes aimed at designing and analyzing the performance and safety of nuclear power plants and reactor fuels. The truly predictive nature of these codes will be achieved by modeling the governing phenomena at the spatial and temporal scales that dominate the behavior. These codes will be executed within a simulation environment that orchestrates code integration with respect to spatial meshing, computational resources, and execution to give the user a common 'look and feel' for setting up problems and displaying results. NEAMS is building upon a suite of existing simulation tools, including those developed by the federal Scientific Discovery through Advanced Computing and Advanced Simulation and Computing programs. NEAMS also draws upon existing simulation tools for materials and nuclear systems, although many of these are limited in terms of scale, applicability, and portability (their ability to be integrated into contemporary software and hardware architectures). NEAMS investments have directly and indirectly supported additional NE research and development programs, including those devoted to waste repositories, safeguarded separations systems, and long-term storage of used nuclear fuel. NEAMS is organized into two broad efforts, each comprising four elements. The quarterly highlights October

  18. Applications

    Science.gov (United States)

    Stern, Arthur M.

    1986-07-01

    Economic incentives have spurred numerous applications of genetically engineered organisms in manufacture of pharmaceuticals and industrial chemicals. These successes, involving a variety of methods of genetic manipulation, have dispelled early fears that genetic engineering could not be handled safely, even in the laboratory. Consequently, the potential for applications in the wider environment without physical containment is being considered for agriculture, mining, pollution control, and pest control. These proposed applications range from modest extensions of current plant breeding techniques for new disease-resistant species to radical combinations of organisms (for example, nitrogen-fixing corn plants). These applications raise concerns about potential ecological impacts (see chapter 5), largely because of adverse experiences with both deliberate and inadvertent introductions of nonindigenous species.

  19. Solar Electricity - The Power of Choice, First Quarter 2001

    Energy Technology Data Exchange (ETDEWEB)

    Poole, L.; Schnelten, K.; Moon, S.

    2001-04-26

    Solar Electricity--The Power of Choice (formerly NREL PV Working With Industry) is a quarterly newsletter devoted to the research and development activities performed by NREL staff in concert with their industry and university partners. This issue is devoted to NREL's renewables workshop for farmers and ranchers, presented at the National Western Stock Show in Denver; the PV Industry Roadmap; the Siemens Solar Industries celebration of 200 MW of cumulative PV module production; and a profile of ''PV Beyond the Horizon'' initiative. The editorialist for this issue is Tim Anderson of the University of Florida.

  20. The AMTEX Partnership. Second quarter report, Fiscal Year 1995

    Energy Technology Data Exchange (ETDEWEB)

    Lemon, D.K.; Quisenberry, R.K. [AMTEX Partnership (United States)

    1995-03-01

    The AMTEX Partnership{trademark} is a collaborative research and development program among the US Integrated Textile Industry, the Department of Energy (DOE), the national laboratories, other federal agencies and laboratories, and universities. The goal of AMTEX is to strengthen the competitiveness of this vital industry, thereby reserving and creating US jobs. The operations and program management of the AMTEX Partnership is provided by the Program Office. This report is produced by the Program Office on a quarterly basis and provides information on the progress, operations, and project management of the partnership.

  1. Quarterly Progress Report (April 1 to June 30, 1950)

    Energy Technology Data Exchange (ETDEWEB)

    Brookhaven National Laboratory

    1950-07-01

    This is the second of a series of Quarterly Progress Reports. While most of the departments have summarized their work or used a form comparable to abstracts, the Chemistry Department has given both abstracts and complete reports on its work. The major part of the progress in the Reactor Science and Engineering Department is being presented simultaneously in a separate classified report. There are reports from the following departments: (1) physics department; (2) instrumentation and health physics department; (3) accelerator project; (4) chemistry department; (5) reactor science and engineering department; (6) biology department; and (7) medical department.

  2. Coal combustion science. Quarterly progress report, July--September 1994

    Energy Technology Data Exchange (ETDEWEB)

    Hardesty, D.R. [ed.; Baxter, L.L.; Davis, K.A.; Hurt, R.H.; Yang, N.Y.C.

    1995-09-01

    This document is a quarterly status report of the Coal Combustion Science Project that is being conducted at the Combustion Research Facility, Sandia National Laboratories, Livermore, California. The information reported is for the period July-September 1994. The objective of this work is to support the Office of Fossil Energy in executing research on coal combustion science. This project consists of basic research on coal combustion that supports both the Pittsburgh Energy Technology Center (PETC) Direct Utilization Advanced Research and Technology Development Program, and the International Energy Agency (IEA) Coal Combustion Science Project.

  3. Field and laboratory investigations of selenium transformation. Quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    Atalay, A.; Koll, K.J.

    1990-12-01

    This quarterly report discusses the preparation and results of a field investigation of a selected coal mine site in Oklahoma. The field investigation has been on-going since July 1990. An analysis of this data would be useful in providing information for potential Se mobility from a coal mine site and the distribution of Se in a soil profile of reclaimed land. Also, included is the investigation and preliminary results of SeO{sub 3}{sup 2{minus}} adsorption and desorption using different soil media, including coal mine spoils (overburden).

  4. Sanitary landfill groundwater monitoring report. Third quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This report contains analytical data for samples taken during third quarter 1995 from wells of the LFW series located at the Sanitary Landfill at the Savannah River Site (SRS). The data are submitted in reference to the Sanitary Landfill Operating Permit (DWP-087A). The report presents monitoring results that equaled or exceeded the Safe Drinking Water Act final Primary Drinking Water Standards (PDWS) or screening levels, established by the U.S. Environmental Protection Agency, the South Carolina final Primary Drinking Water Standard for lead, or the SRS flagging criteria.

  5. Sanitary landfill groundwater monitoring report (U): second quarter 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    This report contains analytical data for samples taken during second quarter 1996 from wells of the LFW series located at the Sanitary Landfill at the Savannah River Site (SRS). The data are submitted in reference to the Sanitary Landfill Operating Permit (DWP-087A). The report presents monitoring results that equaled or exceeded the Safe Drinking Water Act final Primary Drinking Water Standards (PDWS) or screening levels, established by the U.S. Environmental Protection Agency (Appendix A), the South Carolina final Primary Drinking Water Standard for lead (Appendix A), or the SRS flagging criteria (Appendix B).

  6. Sanitary Landfill Groundwater Monitoring Report, Second Quarter 1999

    Energy Technology Data Exchange (ETDEWEB)

    Chase, J.

    1999-07-29

    This report contains analytical data for samples taken during Second Quarter 1999 from wells of the LFW series located at the Sanitary Landfill at the Savannah River Site. The data are submitted in reference to the Sanitary Landfill Operating Permit. The report presents monitoring results that equaled or exceeded the Safe Drinking Water Act final Primary Drinking Water Standards or screening levels, established by the US Environmental Protection Agency, the South Carolina final Primary Drinking Water Standard for lead, or the SRS flagging criteria.

  7. Sanitary landfill groundwater monitoring report: Third quarter 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    This report contains analytical data for samples taken during third quarter 1996 from wells of the LFW series located at the Sanitary Landfill at the Savannah River Site (SRS). The data are submitted in reference to the Sanitary Landfill Operating Permit (DWP-087A). The report presents monitoring results that equaled or exceeded the Safe Drinking Water Act final Primary Drinking Water Standards (PDWS) or screening levels, established by the US Environmental Protection Agency (Appendix A), the South Carolina final Primary Drinking Water Standard for lead (Appendix A), or the SRS flagging criteria (Appendix B).

  8. Sanitary Landfill Groundwater Monitoring Report. Second Quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Chase, J.A.

    1995-08-01

    This report contains analytical data for samples taken during second quarter 1995 from wells of the LFW series located at the Sanitary Landfill at the Savannah River Site (SRS). The data are submitted in reference to the Sanitary landfill Operating Permit (DWP-087A). The report presents monitoring results that equaled or exceeded the Safe Drinking Water Act final Primary Water Standards (PDWS) or screening levels, established by the US Environmental Protection Agency (Appendix A), the South Carolina final Primary Drinking Water Standard for lead (Appendix A), or the SRS flagging criteria (Appendix B).

  9. Integrated Data Collection Analysis (IDCA) Program — Quarterly Review Meeting

    Energy Technology Data Exchange (ETDEWEB)

    Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (IHD-NSWC), Indian Head, MD (United States). Indian Head Division; Sorensen, Daniel N. [Naval Surface Warfare Center (IHD-NSWC), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (IHD-NSWC), Indian Head, MD (United States). Indian Head Division; Shelley, Timothy J. [Air Force Research Lab. (AFRL/RXQF), Tyndall AFB, FL (United States); Reyes, Jose A. [Applied Research Associates, Inc., Tyndall AFB, FL (United States); Phillips, Jason J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-12-05

    On November 9 and 10, 2011 the IDCA had the annual quarterly meeting. The meeting started the afternoon of the first day with a tour of the NSWC IHD explosives safety testing and analysis facilities. The meeting on the second day addressed the formal sponsor review and further technical issues for the IDCA. Examination of the IHD equipment during the tour, lead to a long discussion on liquid test methods. The discussion resulted in revision of liquid test methods in the impact test and selection of a new liquid test standard. In addition, modifications to friction, spark and thermal test methods were discussed.

  10. Sanitary Landfill groundwater monitoring report. First quarter 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    This report contains analytical data for samples taken during first quarter 1993 from wells of the LFW series located at the Sanitary Landfill at the Savannah River Site. The data are submitted in reference to the Sanitary Landfill Operating Permit (DWP-087A). The report presents monitoring results that equaled or exceeded the Safe Drinking Water Act final Primary Drinking Water Standards (PDWS) or screening levels, established by the US Environmental Protection Agency, the South Carolina final Primary Drinking Water Standards for lead or the SRS flagging criteria.

  11. The AMTEX Partnership. Third quarterly report, FY 1995

    Energy Technology Data Exchange (ETDEWEB)

    Lemon, D.K.; Quisenberry, R.K. [AMTEX Partnership (United States)

    1995-06-01

    Key activities for the quarter were the initiation of tactical work on the OPCon Project, development of a draft of the AMTEX Policies and Procedures document, and a meeting of the Industry Technical Advisory Committee. A significant milestone was reached when a memorandum of understanding was signed between the DOE and The Department of Commerce. The agreement signified the official participation of the National Institute of Standards and Technology on the Demand Activated Manufacturing Architecture (DAMA) project in AMTEX. Project accomplishments are given for: computer-aided manufacturing, cotton biotechnology, DAMA, electronic embedded fingerprints, rapid cutting, sensors for agile manufacturing, and textile resource conservation.

  12. Numerical Predictions and Experimental Results of Air Flow in a Smooth Quarter-Scale Nacelle

    Energy Technology Data Exchange (ETDEWEB)

    BLACK, AMALIA R.; SUO-ANTTILA, JILL M.; GRITZO, LOUIS A.; DISIMILE, PETER J.; TUCKER, JAMES R.

    2002-06-01

    Fires in aircraft engine nacelles must be rapidly suppressed to avoid loss of life and property. The design of new and retrofit suppression systems has become significantly more challenging due to the ban on production of Halon 1301 for environmental concerns. Since fire dynamics and the transport of suppressants within the nacelle are both largely determined by the available air flow, efforts to define systems using less effective suppressants greatly benefit from characterization of nacelle air flow fields. A combined experimental and computational study of nacelle air flow therefore has been initiated. Calculations have been performed using both CFD-ACE (a Computational Fluid Dynamics (CFD) model with a body-fitted coordinate grid) and WLCAN (a CFD-based fire field model with a Cartesian ''brick'' shaped grid). The flow conditions examined in this study correspond to the same Reynolds number as test data from the full-scale nacelle simulator at the 46 Test Wing. Pre-test simulations of a quarter-scale test fixture were performed using CFD-ACE and WLCAN prior to fabrication. Based on these pre-test simulations, a quarter-scale test fixture was designed and fabricated for the purpose of obtaining spatially-resolved measurements of velocity and turbulence intensity in a smooth nacelle. Post-test calculations have been performed for the conditions of the experiment and compared with experimental results obtained from the quarter-scale test fixture. In addition, several different simulations were performed to assess the sensitivity of the predictions to the grid size, to the turbulence models, and to the use of wall functions. In general, the velocity predictions show very good agreement with the data in the center of the channel but deviate near the walls. The turbulence intensity results tend to amplify the differences in velocity, although most of the trends are in agreement. In addition, there were some differences between WLCAN and CFD

  13. Quarterly Data for Spoken Language Preferences of Social Security Retirement and Survivor Claimants (2016-onwards)

    Data.gov (United States)

    Social Security Administration — This data set provides quarterly volumes for language preferences at the national level of individuals filing claims for Retirement and Survivor benefits from fiscal...

  14. FY 1991 environmental research programs for the Nevada Operations Office: Work plan and quarterly reports, first and second quarter reports

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-05-01

    The work carried out on behalf of the DOE by the Desert Research Institute (DRI) includes a wide range of research and support activities associated with the Weapons Testing Program conducted at the Nevada Test Site (NTS). Ongoing and new environmental research programs to be conducted by DRI over the period of this contract include archaeological studies, site mitigation plans, compliance activities, and historical research; offsite community radiation monitoring support; environmental compliance activities related to stat and federal regulations; hydrologic assessment of containment of underground nuclear detonations; hydrology/radionuclide investigations designed to better understand and predict the possible subsurface movement of radionuclides at the NTS; and support of various statistical and data management and design, laboratory, field, and administrative activities. In addition to these, archaeological site characterization, flood hazards for rail transportation, and paleofaunal investigations will be carried out in support of the Yucca Mountain Project. Other areas of the overall program which require DRI support are classified security activities, radiation safety and training, quality assurance and control, computer protection and historical data management, review and classification of DRI documents, and preparation of any special reports, e.g., quarterly reports, not included in the requirements of the individual projects. A new set of programs funded by the Office of Technology Development will be in place by the third quarter of FY 1991. These projects will address environmental restoration and waste management concerns, among other related topics. This document contains the Work Plan, including project descriptions, tasks, deliverables and quarterly progress reports on each project for FY 1991.

  15. FY 1991 environmental research programs for the DOE Field Office, Nevada: Work plan and quarterly reports, fourth quarter report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-10-01

    This research includes a wide range of research and support activities associated with the Weapons Testing Program conducted at the Nevada Test Site (NTS). Ongoing and new environmental research programs to be conducted by DRI over the period of this contract include archaeological studies, site mitigation plans, compliance activities, and historical research; offsite community radiation monitoring support; environmental compliance activities related to state and federal regulations; hydrologic assessment of containment of underground nuclear detonations; hydrology/radionuclide investigations designed to better understand and predict the possible subsurface movement of radionuclides at the NTS; and support of various statistical and data management and design, laboratory, field, and administrative activities. In addition to these, archaeological site characterization, flood hazards for rail transportation, and paleofaunal investigations will be carried out in support of the Yucca Mountain Project. Other areas of the overall program which required DRI support are classified security activities, radiation safety and training, quality assurance and control, computer protection and historical data management, review and classification of DRI documents, and preparation of any special reports, e.g., quarterly reports, not included in the requirements of the individual projects. A new set of programs funded by the Office of Technology Development will be in place by the third quarter of FY 1991. These projects will address environmental restoration and waste management concerns, among other related topics. In accordance with specific contract requirements for each activity, DRI will produce summary, status and final reports and, in some cases, journal articles which will present the results of specific research efforts. This document contains the work plan, including project descriptions, tasks, deliverables and quarterly progress reports on each project for FY 1991.

  16. Natural gas imports and exports. Second quarter report 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This quarter`s feature report focuses on natural gas exports to Mexico. OFP invites ideas from the public on future topics dealing with North American natural gas import/export trade. Such suggestions should be left on OFP`s electronic bulletin board. Natural Gas exports to Mexico continued to grow and reached an historic high for the month of June (7.8 Bcf). Two new long-term contracts were activated; Pennsylvania Gas & Water Company began importing 14.7 MMcf per day from TransCanada PipeLines Ltd., and Renaissance Energy (U.S.) Inc. began importing 2.8 MMcf per day from Renaissance Energy Ltd. for resale to Delmarva Power & Light Company. Algerian LNG imports remained stagnant with only one tanker being imported by Pan National Gas Sales, Inc. (Pan National). During the first six months of 1995, data indicates gas imports increased by about 10 percent over the 1994 level (1,418 vs. 1,285 Bcf), with Canadian imports increasing by 14 percent and Algerian imports decreasing by 81 percent. During the same time period, exports increased by 18 percent (83 vs. 70.1 Bcf).

  17. Mechanism for Clastogenic Activity of Naphthalene. Quarterly Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Buchholz, B. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-02-05

    The project has two main goals: 1) Identify the types of adducts naphthalene (NA) forms with DNA and 2) determine whether adduct formation correlates with site selective tumor formation in defined subcompartments of the respiratory tract (respiratory and olfactory nasal epithelium and airways of mice, rats and rhesus monkeys). Five tasks are associated with the completion of the goals. Task 1: Contracting and Animal Use Approvals. IACUC and ACURO approvals are complete. The subcontract with UC Davis (UCD) was executed in December 2014. Task 2: Perform In Vitro Study for Goal 1. Rat and mouse samples exposures completed. Monkey samples need to be exposed in next quarter. Task 3: Perform In Vitro Study for Goal 2. Mouse and rat ex vivo exposures completed. Monkey samples need to be completed in the next quarter. Task 4: Sample Preparation and Analysis. Mouse and Rat Goal 2 samples completed. Monkey samples remain to be done for Goal 2. Rat samples completed for Goal 1. Mouse and Monkey samples for Goal 1 need to be completed. Task 5: Data Interpretation and Reporting. Poster will be presented at 2016 Society of Toxicology Meeting. Outline for paper on adduct formation complete and similar to poster for SOT meeting.

  18. Optimization of nonlinear quarter car suspension–seat–driver mod

    Directory of Open Access Journals (Sweden)

    Mahesh P. Nagarkar

    2016-11-01

    Full Text Available In this paper a nonlinear quarter car suspension–seat–driver model was implemented for optimum design. A nonlinear quarter car model comprising of quadratic tyre stiffness and cubic stiffness in suspension spring, frame, and seat cushion with 4 degrees of freedom (DoF driver model was presented for optimization and analysis. Suspension system was aimed to optimize the comfort and health criterion comprising of Vibration Dose Value (VDV at head, frequency weighted RMS head acceleration, crest factor, amplitude ratio of head RMS acceleration to seat RMS acceleration and amplitude ratio of upper torso RMS acceleration to seat RMS acceleration along with stability criterion comprising of suspension space deflection and dynamic tyre force. ISO 2631-1 standard was adopted to assess ride and health criterions. Suspension spring stiffness and damping and seat cushion stiffness and damping are the design variables. Non-dominated Sort Genetic Algorithm (NSGA-II and Multi-Objective Particle Swarm Optimization – Crowding Distance (MOPSO-CD algorithm are implemented for optimization. Simulation result shows that optimum design improves ride comfort and health criterion over classical design variables.

  19. Optimization of nonlinear quarter car suspension-seat-driver model.

    Science.gov (United States)

    Nagarkar, Mahesh P; Vikhe Patil, Gahininath J; Zaware Patil, Rahul N

    2016-11-01

    In this paper a nonlinear quarter car suspension-seat-driver model was implemented for optimum design. A nonlinear quarter car model comprising of quadratic tyre stiffness and cubic stiffness in suspension spring, frame, and seat cushion with 4 degrees of freedom (DoF) driver model was presented for optimization and analysis. Suspension system was aimed to optimize the comfort and health criterion comprising of Vibration Dose Value (VDV) at head, frequency weighted RMS head acceleration, crest factor, amplitude ratio of head RMS acceleration to seat RMS acceleration and amplitude ratio of upper torso RMS acceleration to seat RMS acceleration along with stability criterion comprising of suspension space deflection and dynamic tyre force. ISO 2631-1 standard was adopted to assess ride and health criterions. Suspension spring stiffness and damping and seat cushion stiffness and damping are the design variables. Non-dominated Sort Genetic Algorithm (NSGA-II) and Multi-Objective Particle Swarm Optimization - Crowding Distance (MOPSO-CD) algorithm are implemented for optimization. Simulation result shows that optimum design improves ride comfort and health criterion over classical design variables.

  20. Baseline gas turbine development program. Eighteenth quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, F W; Wagner, C E [comps.

    1977-04-30

    Progress is reported for a program whose goals are to demonstrate an experimental upgraded gas turbine powered automobile which meets the 1978 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, compact-size American automobile. Initial running of the upgraded engine took place on July 13, 1976. The engine proved to be mechanically sound, but was also 43% deficient in power. A continuing corrective development effort has to date reduced the power deficiency to 32%. Compressor efficiency was increased 2 points by changing to a 28-channel diffuser and tandem deswirl vanes; improved processing of seals has reduced regenerator leakage from about 5 to 2.5% of engine flow; a new compressor turbine nozzle has increased compressor turbine stage efficiency by about 1 point; and adjustments to burner mixing ports has reduced pressure drop from 2.8 to 2.1% of engine pressure. Key compressor turbine component improvements are scheduled for test during the next quarterly period. During the quarter, progress was also made on development of the Upgraded Vehicle control system; and instrumentation of the fourth program engine was completed by NASA. The engine will be used for development efforts at NASA LeRC.

  1. Electricity and gas market observatory. 4. quarter 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    Since July 1, 2004, all electricity and gas consumers can be eligible according to their consumption site, as long as all or part of the electricity or gas consumed is designed for non-residential use. The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web-site (www.cre.fr). It presents: The electricity market; The retail electricity market: Eligible customer segments and their respective weights, Status at January 1, 2007, Dynamic analysis: 4. Quarter 2007; The wholesale electricity market: Traded volumes on the French wholesale electricity market and comparison with European markets, Prices on the French wholesale electricity market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking facts of the 4. 2006 quarter; The gas market; The retail gas market: The eligible customer segments and their respective weights, Status at January 1. 2007; The wholesale gas market: Gas pricing and gas markets in Europe,The wholesale market in France. Some glossaries are attached to the document: Electricity and gas market observatories combined glossary; Specific electricity market observatory glossary; Specific gas market observatory glossary.

  2. Electricity and gas market observatory. 1. quarter 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    Since July 1, 2004, all electricity and gas consumers can be eligible according to their consumption site, as long as all or part of the electricity or gas consumed is designed for non-residential use. The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web-site (www.cre.fr). It presents: The electricity market; The retail electricity market: Eligible customer segments and their respective weights, Status at April 1, 2007, Dynamic analysis: 1. Quarter 2007; The wholesale electricity market: Traded volumes on the French wholesale electricity market and comparison with European markets, Prices on the French wholesale electricity market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking facts of the 1. 2007 quarter; The gas market; The retail gas market: The eligible customer segments and their respective weights, Status at April 1. 2007; The wholesale gas market: Gas pricing and gas markets in Europe,The wholesale market in France. Some glossaries are attached to the document: Electricity and gas market observatories combined glossary; Specific electricity market observatory glossary; Specific gas market observatory glossary.

  3. Global Methodology to Integrate Innovative Models for Electric Motors in Complete Vehicle Simulators Méthodologie générale d’intégration de modèles innovants de moteurs électriques dans des simulateurs véhicules complets

    Directory of Open Access Journals (Sweden)

    Abdelli A.

    2011-11-01

    Full Text Available By what means the greenhouse gas emissions of passenger cars can be reduced to 120 g/km in 2012 and 95 g/km in 2020 as the European Commission and the automotive manufacturers are stated? This question with multi answers preoccupies at the moment the whole automobile world. One of the most promising solutions which receive attention is the electrification of the vehicle. It is this idea that has prompted the automobile manufacturers to envisage increasingly innovative hybrid vehicles. However, this theoretically interesting solution makes more complex the powertrain, which requires the use of simulation tools in order to reduce the cost and the time of system development. System simulation, which is already a crucial tool for the design process of internal combustion engines, becomes indispensable in the development of the Hybrid Electric Vehicle (HEV. To study the complex structures of HEV, following the example of the physical models developed for the internal combustion engine, system simulation has to provide itself of the same predictive models for electric machines. From their specifications, these models have to take into account the strict constraint on the time simulation. This constraint guarantees the wide use of simulators, notably to help the development and the validation of control strategies. This paper aims to present a global methodology to develop innovative models of electrical machines. The final objective of these models is to be integrated in a global vehicle simulator. This methodology includes several types of models and tools, as Finite Elements Models (FEM, characterization and simulating models. This methodology was applied successfully to model an internal permanent magnet synchronous motors. At the end of the modelling process of the electric motor, the latter has been integrated in a complete global hybrid vehicle. This guarantees the good operation and integration in the global process of a new vehicle concept

  4. 19 CFR 351.601 - Annual list and quarterly update of subsidies.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 3 2010-04-01 2010-04-01 false Annual list and quarterly update of subsidies. 351... ANTIDUMPING AND COUNTERVAILING DUTIES Subsidy Determinations Regarding Cheese Subject to an In-Quota Rate of Duty § 351.601 Annual list and quarterly update of subsidies. The Secretary will make the...

  5. 12 CFR 620.11 - Content of quarterly report to shareholders.

    Science.gov (United States)

    2010-01-01

    ... SHAREHOLDERS Quarterly Report § 620.11 Content of quarterly report to shareholders. (a) General. The.... For purposes of this section, major captions to be provided in the financial statements are the same as those provided in the financial statements contained in the institution's annual report to...

  6. Charge ordering and magnetism in quarter-filled Hubbard-Holstein model

    NARCIS (Netherlands)

    Kumar, S.; van den Brink, J.

    2008-01-01

    We study a two-dimensional Hubbard-Holstein model with phonons treated in the adiabatic limit. A Hartree-Fock decomposition is employed for the Hubbard term. A range of electronic densities are discussed with special emphasis on the quarter filling (n=0.5). We argue that the quarter-filled system is

  7. The Savannah River Site's Groundwater Monitoring Program, third quarter 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-02-17

    The Environmental Protection Department/Environmental Monitoring Section (EPD/EMS) administers the Savannah River Site's (SRS) Groundwater Monitoring Program. During third quarter 1991, EPD/EMS conducted extensive sampling of monitoring wells. Analytical results from third quarter 1991 are listed in this report.

  8. The Savannah River Site`s Groundwater Monitoring Program, third quarter 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-02-17

    The Environmental Protection Department/Environmental Monitoring Section (EPD/EMS) administers the Savannah River Site`s (SRS) Groundwater Monitoring Program. During third quarter 1991, EPD/EMS conducted extensive sampling of monitoring wells. Analytical results from third quarter 1991 are listed in this report.

  9. Wolsong 2, 3, and 4 quarterly progress review report on NSSS design and engineering

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Sung Hoon; Kim, Sun Kee; Park, Tae Keun; Hah, Jung Koo; Lee, Song Kyoo; Choi, Byung Noh; Suh, Sung Kee; Kim, Jee Hyun; Lee, Se Yong; Jung, Suk Hwan; Kim, Jong Soo; Nam, Chul; Im, Jong Kyoon; Yuh, Jee Won; Suh, Sung Taek; Lee, Won Kook; Lee, Yung Chul; Suk, Soo Dong; Nam, Sang Koo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-04-01

    This is the Quarterly Progress Review Report for Wolsong NPP 2, 3 and 4 NSSS Design and Engineering which evaluates the performance of the project and describes the project highlight, manpower loading status, design and engineering and project related meetings by quarterly basis. 17 figs., 11 tabs. (Author).

  10. 45 CFR 95.13 - In which quarter we consider an expenditure made.

    Science.gov (United States)

    2010-10-01

    ... have been made in the quarter the expenditure was recorded in the accounting records of any State agency in accordance with generally accepted accounting principles. ... quarter to which the costs were allocated in accordance with the regulations for each program. We consider...

  11. 49 CFR 369.11 - Quarterly reports of passenger revenues, expenses, and statistics.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Quarterly reports of passenger revenues, expenses, and statistics. 369.11 Section 369.11 Transportation Other Regulations Relating to Transportation..., and statistics. Commencing with reports for the quarter ended March 31, 1968, and for subsequent...

  12. Sources of variation in milk flow characteristics at udder and quarter levels

    NARCIS (Netherlands)

    Tancin, V.; Ipema, A.H.; Hogewerf, P.H.; Macuhova, J.

    2006-01-01

    The aim of this study was to describe and analyze effects of parity, stage of lactation, milkability (3 groups of cows with differing peak flow rates), time of milking, and quarter position on milk production and milk flow measures at udder and quarter levels. Particular emphasis was put on changes

  13. Regulatory and technical reports (abstract index journal). Compilation for third quarter 1997, July--September

    Energy Technology Data Exchange (ETDEWEB)

    Stevenson, L.L.

    1998-01-01

    This compilation consists of bibliographic data and abstracts for the formal regulatory and technical reports issued by the US Nuclear Regulatory Commission (NRC) Staff and its contractors. It is NRC`s intention to publish this compilation quarterly and to cumulate it annually. This report contains the third quarter 1997 abstracts.

  14. Effects of dry cow intramammary therapy on quarter infections in the dry period.

    Science.gov (United States)

    Hassan, Z; Daniel, R C; O'Boyle, D; Frost, A J

    1999-11-27

    Quarter milk samples were taken from 150 cows from three dairy farms in south-east Queensland at drying off, two, four and six weeks after drying off, at calving, and one, two and three weeks after calving. In each of the herds, the cows were randomly allocated to three groups of approximately equal size. One group had all the quarters of all the cows treated at drying off with a dry cow antibiotic infusion containing cloxacillin; the second group was given no treatment, and the third group had selected quarters treated on the basis of their high activity of N-acetyl-beta-D-glucosaminidase at drying off. Dry cow treatment resulted in a marked reduction in the number of infected quarters at two and four weeks after drying off, so that the comprehensively treated group had significantly less infected quarters at these times (Pmastitis were detected two weeks after drying off in the untreated groups, 10 in the untreated quarters of the selectively treated groups, and no cases in the comprehensively treated groups. These cases were due mainly to Streptococcus uberis and Streptococcus dysgalactiae. The number of infected untreated quarters increased markedly between drying off and two weeks later, but in all three groups there was a marked decrease in the number of infected quarters between six weeks after drying off and calving, suggesting that the mammary glands were more able to overcome infections at this time.

  15. 46 CFR 190.15-15 - Ventilation for living spaces and quarters.

    Science.gov (United States)

    2010-10-01

    ... mechanical system unless it can be shown that a natural system will provide adequate ventilation. By a... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation for living spaces and quarters. 190.15-15... VESSELS CONSTRUCTION AND ARRANGEMENT Ventilation § 190.15-15 Ventilation for living spaces and quarters...

  16. 46 CFR 72.15-20 - Ventilation for crew quarters and passenger spaces.

    Science.gov (United States)

    2010-10-01

    ... shown that a natural system will provide adequate ventilation. However, vessels which trade regularly in... 46 Shipping 3 2010-10-01 2010-10-01 false Ventilation for crew quarters and passenger spaces. 72... VESSELS CONSTRUCTION AND ARRANGEMENT Ventilation § 72.15-20 Ventilation for crew quarters and passenger...

  17. The Savannah River site`s groundwater monitoring program: second quarter 1997

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, C.D. [Westinghouse Savannah River Company, AIKEN, SC (United States)

    1997-11-01

    The Environmental Protection Department/Environmental Monitoring Section (EPD/EMS) administers the Savannah River Site`s (SRS) Groundwater Monitoring Program. During second quarter 1997, EPD/EMS conducted extensive sampling of monitoring wells. A detailed explanation of the flagging criteria is presented in the Flagging Criteria section of this document. Analytical results from second quarter 1997 are included in this report.

  18. 77 FR 27021 - Proposed Information Collection; Comment Request; Quarterly Survey of Financial Services...

    Science.gov (United States)

    2012-05-08

    ... Financial Services Transactions Between U.S. Financial Services Providers and Foreign Persons AGENCY: Bureau... INFORMATION: I. Abstract Form BE-185, Quarterly Survey of Financial Services Transactions between U.S. Financial Services Providers and Foreign Persons, obtains quarterly data from U.S. financial services...

  19. Fourth-quarter Economic Growth and Time-varying Expected Returns

    DEFF Research Database (Denmark)

    Møller, Stig V.; Rangvid, Jesper

    not predict returns. Fourth-quarter economic growth rates contain considerably more information about expected returns than standard variables used in the literature, are robust to the choice of macro variable, and work in-sample, out-of-sample, and in subsamples. To help explain these results, we show...... that economic growth and growth in consumer confidence are correlated during the fourth quarter, but not during the other quarters: When economic growth is low during the fourth quarter, confidence in the economy is also low such that investors require higher future returns. We discuss rational and behavioral...... reasons why fourth-quarter economic growth, growth in consumer confidence, and expected returns are related....

  20. Pathogen group specific risk factors for clinical mastitis, intramammary infection and blind quarters at the herd, cow and quarter level in smallholder dairy farms in Jimma, Ethiopia.

    Science.gov (United States)

    Tolosa, T; Verbeke, J; Ayana, Z; Piepers, S; Supré, K; De Vliegher, S

    2015-07-01

    A cross-sectional study on clinical mastitis, intramammary infection (IMI) and blind quarters was conducted on 50 smallholder dairy farms in Jimma, Ethiopia. A questionnaire was performed, and quarters of 211 cows were sampled and bacteriologically cultured. Risk factors at the herd, cow, and quarter level for clinical mastitis and (pathogen-specific) intramammary infection were studied using multilevel modeling. As well, factors associated with quarters being blind were studied. Eleven percent of the cows and 4% of the quarters had clinical mastitis whereas 85% of the cows and 51% of the quarters were infected. Eighteen percent of the cows had one or more blind quarter(s), whereas 6% of the quarters was blind. Non-aureus staphylococci were the most frequently isolated pathogens in both clinical mastitis cases and IMI. The odds of clinical mastitis was lower in herds where heifers were purchased in the last year [odds ratio (OR) with 95% confidence interval: 0.11 (0.01-0.90)], old cows (>4 years) [OR: 0.45 (0.18-1.14)], and quarters not showing teat injury [OR: 0.23 (0.07-0.77)]. The odds of IMI caused by any pathogen was higher in herds not practicing teat drying before milking (opposed to drying teats with 1 towel per cow) [OR: 1.68 (1.05-2.69)], cows in later lactation (>180 DIM opposed to ≤90 DIM) [OR: 1.81 (1.14-2.88)], cows with a high (>3) body condition score (BCS) [OR: 1.57 (1.06-2.31)], right quarters (opposed to a left quarter position) [OR: 1.47 (1.10-1.98)], and quarters showing teat injury [OR: 2.30 (0.97-5.43)]. Quarters of cows in herds practicing bucket-fed calf feeding (opposed to suckling) had higher odds of IMI caused by Staphylococcus aureus [OR: 6.05 (1.31-27.90)]. Except for BCS, IMI caused by non-aureus staphylococci was associated with the same risk factors as IMI caused by any pathogen. No access to feed and water immediately after milking [OR: 2.41 (1.26-4.60)], higher parity [OR: 3.60 (1.20-10.82)] and tick infestation [OR: 2.42 (1

  1. 78 FR 65422 - Notice of Funding Availability and Solicitation of Applications for Grants Under the Railroad...

    Science.gov (United States)

    2013-10-31

    ...), environmental protection, National Environmental Policy Act (NEPA), and environmental justice. Appendix 1.3... package provided to selected applicants). Progress Reports--Progress reports are to be submitted quarterly... the relevant budget elements. The grant recipient must furnish the quarterly progress report to the...

  2. Quarterly Data for Asian & Pacific Islander Languages, Social Security Disability Insurance Initial Claims (FY 2016, including 53rd week)

    Data.gov (United States)

    Social Security Administration — This dataset provides quarterly volumes of the Social Security Disability initial claims at the national level from federal fiscal year 2016 with quarter 4 shown two...

  3. Quarterly Data for Spoken Language Preferences of Social Security Disability Insurance Claimants (FY 2016, including 53rd week)

    Data.gov (United States)

    Social Security Administration — This dataset provides quarterly volumes of the Social Security Disability initial claims at the national level for federal fiscal year 2016 with quarter 4 shown two...

  4. Quarterly Data for Spoken Language Preferences of End Stage Renal Disease Medicare Claimants (FY 2016, including 53rd week)

    Data.gov (United States)

    Social Security Administration — This dataset provides quarterly volumes of the Medicare claims based solely on ESRD at the national level for fiscal year 2016 with quarter 4 shown two ways—we base...

  5. Quarterly Data for Asian & Pacific Islander Language Preferences, End Stage Renal Disease Medicare Claims (FY 2016, including 53rd week)

    Data.gov (United States)

    Social Security Administration — This dataset provides quarterly volumes of the Medicare claims based solely on ESRD at the national level for fiscal year 2016 with quarter 4 shown two ways—we base...

  6. Quarterly Data for Asian & Pacific Islander Languages, Supplemental Security Income Initial Claims (Aged) (FY 2016, including 53rd week)

    Data.gov (United States)

    Social Security Administration — This dataset provides quarterly volumes of SSI Aged initial claims at the national level from federal fiscal year 2016 with quarter 4 shown two ways—we base one on a...

  7. LLE Review, Volume 57. Quarterly report, October--December 1993

    Energy Technology Data Exchange (ETDEWEB)

    Simon, A. [ed.

    1993-12-31

    During this quarter, the visible fruits of long design labors on the OMEGA Upgrade began to appear. The target mirror structure was put in place, along with the target chamber itself. The laser bay structures were also installed, and the bay is now being prepared to receive optomechanical, control, and laser assemblies. Further details are in the OMEGA Upgrade Status Report in this issue. Theory and analysis of previous experiments continued during this reporting period. Articles contained herein describe an improved theory of the ablative Rayleigh-Taylor instability; a novel proposal for characterizing plasma-density profiles by using grid image refractometry; a much-improved treatment of the damping of ion sound waves in a mixture of light and heavy ions; and, finally, a new interpretation of measurements of 3/2-harmonic radiation emitted from the long-scale-length plasmas created in earlier OMEGA experiments.

  8. The Hopelessness Theory of Depression: A Quarter Century in Review

    Science.gov (United States)

    Liu, Richard T.; Kleiman, Evan M.; Nestor, Bridget A.; Cheek, Shayna M.

    2015-01-01

    Since the formulation of the hopelessness theory of depression (Abramson, Metalsky, & Alloy, 1989) a quarter century ago, it has garnered considerable interest. The current paper presents a systematic review of this theory including its subsequent elaborations (Rose and Abramson’s [1992] developmental elaboration, Abela and Sarin’s [2002] weakest-link approach, Panzarella, Alloy, and Whitehouse’s [2006] expansion of the hopelessness theory, and the hopelessness theory of suicide [Abramson et al., 2000]), followed by recommendations for future study. Although empirical support was consistently found for several major components of the hopelessness theory, further work is required assessing this theory in relation to clinically significant phenomena. Among the most significant hindrances to advancement in this area is the frequent conceptual confusion between the hopelessness theory and the reformulated learned helplessness theory. PMID:26709338

  9. Automated Array Assembly, Phase II. Quarterly report No. 4

    Energy Technology Data Exchange (ETDEWEB)

    D' Aiello, R. V.

    1978-10-01

    The purpose of the overall program is to establish technological readiness and provide verification for the elements of a manufacturing sequence which would ultimately be suitable for the large-scale production of silicon solar-array modules at a selling price of less than $500/kW. A program and process plan for accomplishing this objective was developed and put into operation during the first quarter. The processing sequence is described. Three junction-formation processes are under consideration; since our cost analysis shows that they do not differ greatly in cost, each should be considered for technical merits and possible future cost reduction. The progress made in the various process steps of the plan is described, and conclusions are presented. (WHK)

  10. NS&T Management Observations: Quarterly Performance Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Gianotto, David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    The INL Management Observation Program (MOP) is designed to improve managers and supervisors understanding of work being performed by employees and the barriers impacting their success. The MOP also increases workers understanding of managements’ expectations as they relate to safety, security, quality, and work performance. Management observations (observations) are designed to improve the relationship and trust between employees and managers through increased engagement and interactions between managers and researchers in the field. As part of continuous improvement, NS&T management took initiative to focus on the participation and quality of observations in FY-14. This quarterly report is intended to (a) summarize the participation and quality of management’s observations, (b) assess observations for commonalities or trends related to facility or process barriers impacting research, and (c) provide feedback and make recommendations for improvements NS&T’s MOP.

  11. NS&T Management Observations - 3rd Quarter

    Energy Technology Data Exchange (ETDEWEB)

    Gianotto, David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-07-01

    The INL Management Observation Program (MOP) is designed to improve managers and supervisors understanding of work being performed by employees and the barriers impacting their success. The MOP also increases workers understanding of managements’ expectations as they relate to safety, security, quality, and work performance. Management observations are designed to improve the relationship and trust between employees and managers through increased engagement and interactions between managers and researchers in the field. As part of continuous improvement, NS&T management took initiative to focus on the participation and quality of observations in FY 14. This quarterly report is intended to (a) summarize the participation and quality of management’s observations, (b) assess observations for commonalities or trends related to facility or process barriers impacting research, and (c) provide feedback and make recommendations for improvements NS&T’s MOP.

  12. Arms control and nonproliferation technologies. First quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Staehle, G; Alonzo, G M; Sanford, N M [eds.

    1995-01-01

    This first quarter issue for 1995 highlights the Small Business Innovation Research (SBIR) program. The SBIR program is managed by the DOE`s Basic Energy Sciences program within the Office of Energy Research. Each year, the SBIR program solicits research ideas of interest to the DOE. Articles contained in this issue include: The Small Business Innovation Research Program supported by the Office of Nonproliferation and National Security; Automated cueing to man-made objects via multispectral image; Security systems get smart with advanced processing and thermal imaging; A breakthrough in cooling system technology; The APSTNG neutron probe; Lithium-doped fullerene neutron detector; Miniature GC-MS for on-site chemical analysis; and Winner of Sandia President`s Quality Award.

  13. Towards the eco-quarters for the Pescara urban regeneration

    Directory of Open Access Journals (Sweden)

    Donatella Radogna

    2015-11-01

    Full Text Available The subject of the experimentation is the definition of some strategies for an efficient, responsible and sustainable building requalification, in the conversion of the public housing settlements of Pescara in eco-quarters, according to the aim of supplying a contribution to the local administration for the urban regeneration policies. Considering the high pollution indicators, the study aspires to an environmentally, economically and socially suitable cohabitation of the territorial and climatic and built elements. So we propose some requalification hypothesis, for an enhancement of the housing supply in a new urban mould with a positive environmental balance and able to cheer the considered context cultural and social conditions up. 

  14. Technical Data Catalog: Yucca Mountain Site Characterization Project. Quarterly supplement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-30

    This report presents reference information contained in the Yucca Mountain Project Automated Technical Data Tracking System. The Department of Energy is seeking to design and maintain a geologic repository for the disposal of high-level radioactive wastes. However, before this repository can be built, the DOE must first do a comprehensive site evaluation. This evaluation is subject to many regulations. This report fulfills the reporting requirements of the Site-Specific Procedural Agreement for Geologic Repository to develop and maintain a catalog of data which will be updated and provided to the Nuclear Regulatory Commission on a quarterly basis. This catalog contains: description of data; time, place, and method of acquisition; and where data may be examined.

  15. Quarterly Briefing Book on Environmental and Waste Management Activities

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.C.

    1991-06-01

    The purpose of the Quarterly Briefing Book on Environmental and Waste Management Activities is to provide managers and senior staff at the US Department of Energy-Richland Operations Office and its contractors with timely and concise information on Hanford Site environmental and waste management activities. Each edition updates the information on the topics in the previous edition, deletes those determined not to be of current interest, and adds new topics to keep up to date with changing environmental and waste management requirements and issues. Section A covers current waste management and environmental restoration issues. In Section B are writeups on national or site-wide environmental and waste management topics. Section C has writeups on program- and waste-specific environmental and waste management topics. Section D provides information on waste sites and inventories on the site. 15 figs., 4 tabs.

  16. Mirror fusion. Quarterly report, April-June 1981

    Energy Technology Data Exchange (ETDEWEB)

    1981-09-11

    The information in each Quarterly is presented in the same sequence as in the Field Work Package Proposal and Authorization System (WPAS) submissions prepared for the U.S. Department of Energy; the main sections are Applied Plasma Physics, Confinement Systems, Development and Technology, and Mirror Fusion Test Facility (Planning and Projects). On occasion, we shall include information pertaining to the LLNL role as Lead Laboratory for the Open Systems Mirror Fusion Program. Each of these sections is introduced by an overall statement of the goals and purposes of the groups reporting in it. As appropriate within each section, statements of the goals of individual programs and projects are followed by articles containing summaries of significant recent activity and descriptive text.

  17. Coal gasification. Quarterly report, April--June 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    The conversion of coal to high-Btu gas requires a chemical and physical transformation of solid coal. However, because coal has widely differing chemical and physical properties, depending on where it is mined, it is difficult to process. Therefore, to develop the most suitable techniques for gasifying coal, ERDA, together with the American Gas Association, is sponsoring the development of several advanced conversion processes. Although the basic coal-gasification chemical reactions are the same for each process, the processes under development have unique characteristics. A number of the processes for converting coal to high Btu and to low Btu gas have reached the pilot plant stage. The responsibility for designing, constructing and operating each of these pilot plants is defined and progress on each during the quarter is described briefly. The accumulation of data for a coal gasification manual and the development of mathematical models of coal gasification processes are reported briefly. (LTN)

  18. Baseline gas turbine development program. Sixteenth quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, F W; Wagner, C E

    1976-10-31

    Progress is reported for a program whose goals are to demonstrate an experimental ungraded gas turbine powered automobile which meets the 1978 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, compact-size American automobile. Initial running of the upgraded engine took place on July 13, 1976. The engine proved to be mechanically sound but was also seriously deficient in power. Principal program effort has therefore been in the area of diagnostic testing and corrective development. To date, three upgraded engines were assembled and two were run in the test cell. Special diagnostic instrumentation was installed on Engine 3 to evaluate the compressor, turbine, and hot engine leakage. Engine airflow, starting characteristics, oil flow/heat rejection/blowby, emissions, leakage, and component performance tests were conducted in this quarter.

  19. Expedited Demolition Notification for 2nd Quarter CY 2012 Structures

    Energy Technology Data Exchange (ETDEWEB)

    Juarez, Catherine L. [Los Alamos National Laboratory

    2012-06-18

    The National Nuclear Security Administration and Los Alamos National Security, LLC (LANS) (collectively the Permittees) are informing the New Mexico Environment Department Hazardous Waste Bureau (NMED-HWB) of the need to expedite the demolition of structures summarized in the enclosures. These structures have been identified to receive funding and be demolished prior to the 3rd Quarter Demolition Notification (June 30, 2012). This letter is a follow up to the email that was sent to the NMED-HWB on April 17, 2012. The enclosures attached to this letter satisfy the reporting requirements as outlined in Section 1.17 of the LANL Hazardous Facility Waste Permit (Permit). Demolition of buildings that appear on this list will not occur until 30 days after NMED has received this notification.

  20. NS&T Managment Observations - 1st Quarter

    Energy Technology Data Exchange (ETDEWEB)

    David Gianotto

    2014-06-01

    The INL Management Observation Program (MOP) is designed to improve managers and supervisors understanding of work being performed by employees and the barriers impacting their success. The MOP also increases workers understanding of managements’ expectations as they relate to safety, security, quality, and work performance. Management observations (observations) are designed to improve the relationship and trust between employees and managers through increased engagement and interactions between managers and researchers in the field. As part of continuous improvement, NS&T management took initiative to focus on the participation and quality of observations in FY 14. This quarterly report is intended to (a) summarize the participation and quality of management’s observations, (b) assess observations for commonalities or trends related to facility or process barriers impacting research, and (c) provide feedback and make recommendations for improvements NS&T’s MOP.