High-speed rail with emerging automobiles and aircraft can reduce environmental impacts in California’s future

International Nuclear Information System (INIS)

Chester, Mikhail; Horvath, Arpad

2012-01-01

Sustainable mobility policy for long-distance transportation services should consider emerging automobiles and aircraft as well as infrastructure and supply chain life-cycle effects in the assessment of new high-speed rail systems. Using the California corridor, future automobiles, high-speed rail and aircraft long-distance travel are evaluated, considering emerging fuel-efficient vehicles, new train designs and the possibility that the region will meet renewable electricity goals. An attributional per passenger-kilometer-traveled life-cycle inventory is first developed including vehicle, infrastructure and energy production components. A consequential life-cycle impact assessment is then established to evaluate existing infrastructure expansion against the construction of a new high-speed rail system. The results show that when using the life-cycle assessment framework, greenhouse gas footprints increase significantly and human health and environmental damage potentials may be dominated by indirect and supply chain components. The environmental payback is most sensitive to the number of automobile trips shifted to high-speed rail, and for greenhouse gases is likely to occur in 20–30 years. A high-speed rail system that is deployed with state-of-the-art trains, electricity that has met renewable goals, and in a configuration that endorses high ridership will provide significant environmental benefits over existing modes. Opportunities exist for reducing the long-distance transportation footprint by incentivizing large automobile trip shifts, meeting clean electricity goals and reducing material production effects. (letter)

Wind driven mobile charging of automobile battery- A case study ...

African Journals Online (AJOL)

This paper deals with implementation of mobile wind driven generator technology to produce electricity in charging of two wheeler (12V) automobile battery. The use of PWM methodology with pulse charging method at a constant rate has been adopted for this purpose. The low speed PMSG driven by wind at speed of ...

Achieving deep cuts in the carbon intensity of U.S. automobile transportation by 2050: complementary roles for electricity and biofuels.

Science.gov (United States)

Scown, Corinne D; Taptich, Michael; Horvath, Arpad; McKone, Thomas E; Nazaroff, William W

2013-08-20

Passenger cars in the United States (U.S.) rely primarily on petroleum-derived fuels and contribute the majority of U.S. transportation-related greenhouse gas (GHG) emissions. Electricity and biofuels are two promising alternatives for reducing both the carbon intensity of automotive transportation and U.S. reliance on imported oil. However, as standalone solutions, the biofuels option is limited by land availability and the electricity option is limited by market adoption rates and technical challenges. This paper explores potential GHG emissions reductions attainable in the United States through 2050 with a county-level scenario analysis that combines ambitious plug-in hybrid electric vehicle (PHEV) adoption rates with scale-up of cellulosic ethanol production. With PHEVs achieving a 58% share of the passenger car fleet by 2050, phasing out most corn ethanol and limiting cellulosic ethanol feedstocks to sustainably produced crop residues and dedicated crops, we project that the United States could supply the liquid fuels needed for the automobile fleet with an average blend of 80% ethanol (by volume) and 20% gasoline. If electricity for PHEV charging could be supplied by a combination of renewables and natural-gas combined-cycle power plants, the carbon intensity of automotive transport would be 79 g CO2e per vehicle-kilometer traveled, a 71% reduction relative to 2013.

Consumer preferences for automobile energy-efficiency grades

International Nuclear Information System (INIS)

Koo, Yoonmo; Kim, Chang Seob; Hong, Junhee; Choi, Ie-Jung; Lee, Jongsu

2012-01-01

Recently, increases in energy prices have made energy conservation and efficiency improvements even more essential than in the past. However, consumers experience difficulty in obtaining reliable information regarding energy efficiency, so that many countries have implemented regulations to enforce energy-efficiency grade labeling. In this study, consumer preferences regarding energy efficiency grades are analyzed by the mixed logit and MDCEV model based on the revealed preference data of past automobile purchases. Findings show that consumers rationally apply information on energy efficiency grades when purchasing automobiles. However, they tend to show inefficiency in automobile usage patterns. This study discusses political implications of energy efficiency policies as they might impact consumer behaviors of automobile purchase and usage. - Highlights: ► We model discrete choice model to evaluate energy-efficiency grade regulation. ► Consumers apply information on energy efficiency grades when purchasing automobiles. ► However, they tend to show inefficiency in automobile usage patterns. ► The policies for efficient automobile usage are discussed.

Electric vehicles

Science.gov (United States)

1990-03-01

Quiet, clean, and efficient, electric vehicles (EVs) may someday become a practical mode of transportation for the general public. Electric vehicles can provide many advantages for the nation's environment and energy supply because they run on electricity, which can be produced from many sources of energy such as coal, natural gas, uranium, and hydropower. These vehicles offer fuel versatility to the transportation sector, which depends almost solely on oil for its energy needs. Electric vehicles are any mode of transportation operated by a motor that receives electricity from a battery or fuel cell. EVs come in all shapes and sizes and may be used for different tasks. Some EVs are small and simple, such as golf carts and electric wheel chairs. Others are larger and more complex, such as automobile and vans. Some EVs, such as fork lifts, are used in industries. In this fact sheet, we will discuss mostly automobiles and vans. There are also variations on electric vehicles, such as hybrid vehicles and solar-powered vehicles. Hybrid vehicles use electricity as their primary source of energy, however, they also use a backup source of energy, such as gasoline, methanol or ethanol. Solar-powered vehicles are electric vehicles that use photovoltaic cells (cells that convert solar energy to electricity) rather than utility-supplied electricity to recharge the batteries. These concepts are discussed.

Geotechnical Monitoring of the Automobile Road

Science.gov (United States)

Matsiy, Vladimir

2017-12-01

In the present article, the results of geotechnical monitoring of A-147 automobile road “Dzhubga-Sochi” are given. Some sections of the automobile road suffered from the landslide adjustment movements; it resulted in many deformations of the retaining structures, the damages of the roadbed and ground crawling over the retaining walls. The observation data made it possible to specify the borders of the active landslide and to form a forecast of the landslide activity in the sections of the automobile roads. Due to monitoring being carried out, there was substantiated the necessity to correct the service forms and records connected with the automobile road reconstruction.

Where have all the flowers gone? Forecasting green trends in the automobile industry with a choice-based conjoint adoption model

NARCIS (Netherlands)

Eggers, Felix; Eggers, Fabian

With rising gas prices, global warming, and green thinking, all-electric vehicles are currently considered the automobile technology of the future. However, besides their advantages electric drive trains also exhibit several disadvantages. Moreover, history shows several failed attempts to establish

The Hybrid Automobile and the Atkinson Cycle

Science.gov (United States)

Feldman, Bernard J.

2008-01-01

The hybrid automobile is a strikingly new automobile technology with a number of new technological features that dramatically improve energy efficiency. This paper will briefly describe how hybrid automobiles work; what are these new technological features; why the Toyota Prius hybrid internal combustion engine operates on the Atkinson cycle…

Historical Financial Data - Domestic Automobile Manufacturers

Science.gov (United States)

1979-01-01

A historical financial data base was developed for the four major U.S. automobile manufacturers, focusing on the specific operations associated with production and marketing of automobiles and light trucks. The years subject to analysis were 1967-197...

Heat rejection efficiency research of new energy automobile radiators

Science.gov (United States)

Ma, W. S.; Shen, W. X.; Zhang, L. W.

2018-03-01

The driving system of new energy vehicle has larger heat load than conventional engine. How to ensure the heat dissipation performance of the cooling system is the focus of the design of new energy vehicle thermal management system. In this paper, the heat dissipation efficiency of the radiator of the hybrid electric vehicle is taken as the research object, the heat dissipation efficiency of the radiator of the new energy vehicle is studied through the multi-working-condition enthalpy difference test. In this paper, the test method in the current standard QC/T 468-2010 “automobile radiator” is taken, but not limited to the test conditions specified in the standard, 5 types of automobile radiator are chosen, each of them is tested 20 times in simulated condition of different wind speed and engine inlet temperature. Finally, regression analysis is carried out for the test results, and regression equation describing the relationship of radiator heat dissipation heat dissipation efficiency air side flow rate cooling medium velocity and inlet air temperature is obtained, and the influence rule is systematically discussed.

Measuring the environmental impacts and sustainability of automobiles

Energy Technology Data Exchange (ETDEWEB)

Lave, L B; Cobas Flores, E; McMichael, F C; Hendrickson, C T; Horvath, A; Joshi, S [Carnegie Mellon Univ., Pittsburgh, PA (United States)

1996-11-01

In the paper the following topics are discussed: - the need for public education and involvement in the decision process, - the difficulty of defining sustainability, - the occasional difference between the goals of sustainability and environmental quality, - the need for life cycle analysis to analyze the sustainability and environmental quality implications of a product, process, or material. The importance of environmental input-output analysis is stressed. This new tool can provide the life cycle information cheaply, quickly, and with much less uncertainty. Examples are presented for making an automobile, a seat out of plastic or aluminium, and an electric vehicle. (author) 4 tabs., refs.

Recent trends in automobile recycling: An energy and economic assessment

Energy Technology Data Exchange (ETDEWEB)

Curlee, T.R.; Das, S.; Rizy, C.G. [Oak Ridge National Lab., TN (United States); Schexanyder, S.M. [Tennessee Univ., Knoxville, TN (United States). Dept. of Biochemistry

1994-03-01

Recent and anticipated trends in the material composition of domestic and imported automobiles and the increasing cost of landfilling the non-recyclable portion of automobiles (automobile shredder residue or ASR) pose questions about the future of automobile recycling. This report documents the findings of a study sponsored by the US Department of Energy`s Office of Environmental Analysis to examine the impacts of these and other relevant trends on the life-cycle energy consumption of automobiles and on the economic viability of the domestic automobile recycling industry. More specifically, the study (1) reviewed the status of the automobile recycling industry in the United States, including the current technologies used to process scrapped automobiles and the challenges facing the automobile recycling industry; (2) examined the current status and future trends of automobile recycling in Europe and Japan, with the objectives of identifying ``lessons learned`` and pinpointing differences between those areas and the United States; (3) developed estimates of the energy system impacts of the recycling status quo and projections of the probable energy impacts of alternative technical and institutional approaches to recycling; and (4) identified the key policy questions that will determine the future economic viability of automobile shredder facilities in the United States.

Contact Dermatitis In Automobile Repair workers

Directory of Open Access Journals (Sweden)

Joshi M P

1997-01-01

Full Text Available Automobile repair workers are at risk of developing skin morbidity including occupational dermatoses because of their exposure to mineral oils, petroleum products and its derivatives and lubricating oil. This cross- sectional study was carried out at Maharashtra State Road Transport Corporation workshops in Nagpur city to investigate prevalence of skin morbidity including contact dermatitis in automobile repair workers. The study included 288 (49.9% automobile repair workers 180 (31.3% workshop office staff and 109 (18.8% divisional office employees. Dermatitis was the commonest skin morbidity in all the study subjects and it was significantly more prevalent in automobile repair workers. Folliculitis was detected in 13.2% of auto â€" repair workers and was not seen in the other two groups. Increasing trend of skin morbidity was correlated with the length of service of employees. Proper protective measures along with suitable washing facilities should be provided

The challenges of automobile-dependent urban transport strategy

Directory of Open Access Journals (Sweden)

Jovanović Miomir

2015-01-01

Full Text Available The fundamental aims of sustainable urban development and the pro-automobile oriented economic development are on a collision course. It is obvious that automobile-dependent urban development is under heavy/powerful influence of the automobile lobby (automobile and oil industries, along with construction. In this domain famous land-use-transportation studies (or ‘grand transportation studies’ are, unfortunately, still prevailing - a vicious circle of self-fulfilling prophecy of congestion, road building, sprawl, congestion and more road building. Until recently, it was commonly thought that investment in public transport was not economically sustainable and that focusing on the development of the automobile industry and financing the construction of roadways stimulated economic growth. In this paper we clearly show that automobile industry is now overcapitalized, less profitable than many other industries (and may become even less profitable in the future, that transport market is characterized with huge distortions (more than a third of motor-vehicle use can be explained by underpriced driving, while new road investment does not have a major impact on economic growth (especially in a region with an already well-developed infrastructure, and that pro-automobile transport strategy inexorably incurs harmful global, regional and local ecological consequences. [Projekat Ministarstva nauke Republike Srbije, br. 37010

Can urban rail transit curb automobile energy consumption?

International Nuclear Information System (INIS)

Lin, Boqiang; Du, Zhili

2017-01-01

With the rapid development of China's economy and the speed of urbanization, China's automobile sector has experienced rapid development. The rapid development of the automobile sector has increased energy consumption. According to the results of this paper, automobile energy consumption accounted for about 10.73% of total energy consumption in China in 2015, about 3.6 times the proportion a decade ago. With the deterioration of urban traffic conditions, relying on expanding the amount of vehicles and city road network cannot solve the problem. Urban rail transit is energy-saving and less-polluting, uses less space, has large capacity, and secure. Urban rail transit, according to the principle of sustainable development, is a green transportation system and should be especially adopted for large and medium-sized cities. The paper uses the binary choice model (Probit and Logit) to analyze the main factors influencing the development of rail transit in Chinese cities, and whether automobile energy consumption is the reason for the construction of urban rail transit. Secondly, we analyze the influence of urban rail transit on automobile energy consumption using DID model. The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly, with continuous impact in the second year. - Highlights: • Investigate the main factors influencing the building of rail transit for Chinese cities. • Analyze the influence of urban rail transit on automobile energy consumption by DID model. • The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly.

Promotion Models and Achievements of New-energy Automobiles in Shenzhen

Science.gov (United States)

Cai, Yu; Xiong, Siqin; Bai, Bo; Ma, Xiaoming

2017-08-01

As one of the pilot cities in China for demonstration and promotion of new-energy automobiles, Shenzhen, driven by the “two engines” of the government and the market, has made swift progress in promotion of its new-energy automobiles. This paper analyses Shenzhen’s governmental promotion policy concerning new-energy automobiles, summarizes Shenzhen’s commercial models for promoting new-energy automobiles, and is expected to provide reference for other provinces and cities to promote new-energy automobiles.

Active-flux based motion sensorless vector control of biaxial excitation generator/motor for automobiles (BEGA)

DEFF Research Database (Denmark)

Coroban-Schramel, Vasile; Boldea, Ion; Andreescu, Gheorghe-Daniel

2009-01-01

This paper proposes a novel, active-flux based, motion-sensorless vector control structure for biaxial excitation generator for automobiles (BEGA) for wide speed range operation. BEGA is a hybrid excited synchronous machine having permanent magnets on q-axis and a dc excitation on daxis. Using th...... electrical degrees in less than 2 ms test time....

The future role of the automobile in Canada. Le role future de l'automobile au Canada

Energy Technology Data Exchange (ETDEWEB)

Khan, A.M.

1982-03-01

This paper describes the future role of the automobile from an intercity transportation perspective in multimodal contexts; it identifies courses of action open to Transport Canada officials in support of the suggested role. Discussed here is the automobile's multifaceted role, focussing mainly on its use as a mode of door-to-door travel for short trips, a feeder as well as an adjunct to public modes, a means of avoiding excessible public expenditure in highly subsidized public modes (e.g., rail), and a means for providing basic mobility in regional travel contexts. This study goes beyond the 1979 Transport Canada report with the same title by recommending courses of action that might assist officials in formulating policy, planning and other endeavours. At the outset, updated information is provided on the current status and future outlook of selected important factors that affect the future transportation role of the automobile. Against this background, the relevance of major findings of the 1979 automobile report are reviewed and gaps in knowledge identified. On the basis of this information, a future role for the automobile is discussed, with appropriate courses of action recommended. These recommendations and their institutional/program implications are addressed to Transport Canada in the areas of strategic planning and policy, energy planning, safety and coordination of actions/programs with other federal government departments and provincial governments. 48 refs., 8 tabs.

Restoring a Classic Electric Car

Science.gov (United States)

Kraft, Thomas E.

2012-01-01

One hundred years ago, automobiles were powered by steam, electricity, or internal combustion. Female drivers favored electric cars because, unlike early internal-combustion vehicles, they did not require a crank for starting. Nonetheless, internal-combustion vehicles came to dominate the industry and it's only in recent years that the electrics…

Asbestos-related diseases in automobile mechanics.

Science.gov (United States)

Ameille, Jacques; Rosenberg, Nicole; Matrat, Mireille; Descatha, Alexis; Mompoint, Dominique; Hamzi, Lounis; Atassi, Catherine; Vasile, Manuela; Garnier, Robert; Pairon, Jean-Claude

2012-01-01

Automobile mechanics have been exposed to asbestos in the past, mainly due to the presence of chrysotile asbestos in brakes and clutches. Despite the large number of automobile mechanics, little is known about the non-malignant respiratory diseases observed in this population. The aim of this retrospective multicenter study was to analyse the frequency of pleural and parenchymal abnormalities on high-resolution computed tomography (HRCT) in a population of automobile mechanics. The study population consisted of 103 automobile mechanics with no other source of occupational exposure to asbestos, referred to three occupational health departments in the Paris area for systematic screening of asbestos-related diseases. All subjects were examined by HRCT and all images were reviewed separately by two independent readers; who in the case of disagreement discussed until they reached agreement. Multiple logistic regression models were constructed to investigate factors associated with pleural plaques. Pleural plaques were observed in five cases (4.9%) and interstitial abnormalities consistent with asbestosis were observed in one case. After adjustment for age, smoking status, and a history of non-asbestos-related respiratory diseases, multiple logistic regression models showed a significant association between the duration of exposure to asbestos and pleural plaques. The asbestos exposure experienced by automobile mechanics may lead to pleural plaques. The low prevalence of non-malignant asbestos-related diseases, using a very sensitive diagnostic tool, is in favor of a low cumulative exposure to asbestos in this population of workers.

Asbestos-related diseases in automobile mechanics

Science.gov (United States)

Ameille, Jacques; Rosenberg, Nicole; Matrat, Mireille; Descatha, Alexis; Mompoint, Dominique; Hamzi, Lounis; Atassi, Catherine; Vasile, Manuela; Garnier, Robert; Pairon, Jean-Claude

2012-01-01

Purpose Automobile mechanics have been exposed to asbestos in the past, mainly due to the presence of chrysotile asbestos in brakes and clutches. Despite the large number of automobile mechanics, little is known about the non-malignant respiratory diseases observed in this population. The aim of this retrospective multicenter study was to analyze the frequency of pleural and parenchymal abnormalities on HRCT in a population of automobile mechanics. Methods The study population consisted of 103 automobile mechanics with no other source of occupational exposure to asbestos, referred to three occupational health departments in the Paris area for systematic screening of asbestos–related diseases. All subjects were examined by HRCT and all images were reviewed separately by two independent readers, with further consensus in the case of disagreement. Multiple logistic regression models were constructed to investigate factors associated with pleural plaques. Results Pleural plaques were observed in 5 cases (4.9%) and interstitial abnormalities consistent with asbestosis were observed in 1 case. After adjustment for age, smoking status, and a history of non-asbestos-related respiratory diseases, multiple logistic regression models showed a significant association between the duration of exposure to asbestos and pleural plaques. Conclusions The asbestos exposure experienced by automobile mechanics may lead to pleural plaques. The low prevalence of non-malignant asbestos-related diseases, using a very sensitive diagnostic tool, is in favor of a low cumulative exposure to asbestos in this population of workers. PMID:21965465

The construction of a Danish automobile culture

DEFF Research Database (Denmark)

Wagner, Michael

The aim of this article is to discuss the way the automobile was introduced and promoted as a vehicle for modern leisure life in Denmark 1900-1970., and to demonstrate how automobilism was constructed around an ideology of consumption for leisure and recreation....

Electric cars : The climate impact of electric cars, focusing on carbon dioxide equivalent emissions

OpenAIRE

Ly, Sandra; Sundin, Helena; Thell, Linda

2012-01-01

This bachelor thesis examines and models the emissions of carbon dioxide equivalents of the composition of automobiles in Sweden 2012. The report will be based on three scenarios of electricity valuation principles, which are a snapshot perspective, a retrospective perspective and a future perspective. The snapshot perspective includes high and low values for electricity on the margin, the retrospective perspective includes Nordic and European electricity mix and the future perspective includ...

Nitrosamines in new automobiles

Energy Technology Data Exchange (ETDEWEB)

Fine, D H; Reisch, J; Rounbehler, D P

1980-01-01

The volatile nitrosamines, N-nitrosodimethylamine (NDMA), N-nitrosomorpholine (NMOR), N-nitrosodiethylamine (NDEA) and possibly N-nitrosodibutylamine (NDBA) have been found to be present as airborne pollutants in the interiors of new (1979 model) automobiles. In the 38 automobiles tested, the levels ranged from 0.07 to 0.83 micrograms/m3 (average 0.3 micrograms/m3) for NDMA, from 0.07 to 2.5 micrograms/m3 (average 0.67 micrograms/m3) for NMOR, from 0.04 to 0.39 micrograms/m3 (average 0.11 micrograms/m3) for NDEA and trace levels (less than 0.01 micrograms/m3) for NDMA.

Developments in batteries and fuel cells for electric and hybrid electric vehicles

International Nuclear Information System (INIS)

Ahmed, R.

2013-01-01

Due to ever increasing threats of climate change, urban air pollution and costly and depleting oil and gas sources a lot of work is being done for the development of electric vehicles. Hybrid electric vehicles, plug-in hybrid electric vehicles and all electric vehicles are powered by batteries or by hydrogen and fuel cells are the main types of vehicles being developed. Main types of batteries which can be used for electric vehicles are lead-acid, Ni-Cd, Nickel-Metal-Hybrid ( NiMH) and Lithium-ion (Li-ion) batteries which are discussed and compared. Lithium ion battery is the mostly used battery. Developments in the lithium ion batteries are discussed and reviewed. Redox flow batteries are also potential candidates for electric vehicles and are described. Hybrid electric vehicles can reduce fuel consumption considerably and is a good midterm solution. Electric and hybrid electric vehicles are discussed. Electric vehicles are necessary to mitigate the effects of pollution and dependence on oil. For all the electric vehicles there are two options: batteries and fuel Cells. Batteries are useful for small vehicles and shorter distances but for vehicle range greater than 150 km fuel cells are superior to batteries in terms of cost, efficiency and durability even using natural gas and other fuels in addition to hydrogen. Ultimate solution for electric vehicles are hydrogen and fuel cells and this opinion is also shared by most of the automobile manufacturers. Developments in fuel cells and their applications for automobiles are described and reviewed. Comparisons have been done in the literature between batteries and fuel cells and are described. (author)

Automobile Starting and Lighting System Maintenance Training ...

African Journals Online (AJOL)

The purpose of this study is to develop automobile starting and lighting system maintenance training manual for technical college students. Research and Development (R and D) design was adopted for the study. The population of the study is 348, comprising of 76 auto-mechanics teachers, 36 automobile supervisors and ...

Development and environment of new electric automobile, `Ecovehicle`; Shingata denki jidosha eko vehicle kaihatsu to kankyo

Energy Technology Data Exchange (ETDEWEB)

Shimizu, H [National Inst. for Environmental Studies, Tsukuba (Japan)

1996-10-27

This paper introduces history of the development of an electric automobile, `Ecovehicle`. It is provided with a high overall energy efficiency compared with an engine vehicle. The Ecovihicle is 1.2m in width, 3.3m in length, 2 seating capacities and 910kg in overall weight with serially connected 56 batteries of each 4V, 40Ah and having the total weight of 269kg. Its travel distance per charging is 130km at a speed of 80 k.p.h. This vehicle is capable of running with an energy of approximately one third as much as that of a light car. In addition, the vehicle is provided with polycrystal solar batteries placed on 0.6m{sup 2} area on the roof and spoiler generating 60W maximum. Assuming the annual duration of sunshine is 1,800 hours, charging is possible for 63kWh annually. Assuming the charging efficiency is 83%, charging is possible about seven times, which is an equivalent of travelling about 1,000km annually. The characteristics for example are the employment of brushless DC motor, use of energy saving switching element IGBT in order to realize a low level of loss in the inverter, in-wheel motor system, and storage of storage batteries in a hollow aluminum frame installed under the floor. 2 refs., 5 figs., 1 tab.

Automobile air-conditioning its energy and environmental impact; La climatisation automobile impact energetique et environnemental

Energy Technology Data Exchange (ETDEWEB)

Barbusse, St.; Gagnepain, L.

2003-05-01

Over the last three decades, automobile manufacturers have made a lot of progress in specific fuel consumption and engine emissions of pollutants. Yet the impact of these improvements on vehicle consumption has been limited by increased dynamic performances (maxi-mum speed, torque), increased safety (power steering and power brakes) and increased comfort (noise and vibration reduction, electric windows and thermal comfort). Because of this, the real CO{sub 2}-emission levels in vehicles is still high in a context where road transport is a major factor in the balance sheet of greenhouse gas emissions, thus in complying with the inter-national climate convention. Although European, Japanese and Korean manufacturers signed an important agreement with the European Commission for voluntarily reducing CO{sub 2} emissions from their vehicles, with a weighted average emission goal by sales of 140 grams per km on the MVEG approval cycle by 2008, it has to be noted that the European procedures for measuring fuel consumption and CO{sub 2} emissions do not take accessories into account, especially air-condition ng (A/C). The big dissemination of this equipment recognized as a big energy consumer and as using a refrigerant with a high global warming potential ed ADEME to implement a set of assessments of A/C's energy and environmental impact. In particular these assessments include studies of vehicle equipment rates, analyses of impact on fuel consumption as well as regulated pollutant emissions in the exhaust, a characterization of the refrigerant leakage levels and an estimate of greenhouse gas emissions for all air-conditioned vehicles. This leaflet summarizes the results of these actions. All of these studies and additional data are presented in greater detail in the document,-'Automobile Air-conditioning' (ADEME reference no. 4985). (author)

Electric Vehicle Careers: On the Road to Change

Science.gov (United States)

Hamilton, James

2012-01-01

Many occupations related to electric vehicles are similar to those that help to make and maintain all types of automobiles. But the industry is also adding some nontraditional jobs, and workers' skill sets must evolve to keep up. This article describes careers related to electric vehicles. The first section is about the electric vehicle industry…

Credit constraints, consumer leasing and the automobile replacement decision

OpenAIRE

Kathleen W. Johnson

1999-01-01

This paper presents a model of consumer automobile replacement in the presence of leasing. The model incorporates credit constraints to distinguish between the leasing and purchasing options. It demonstrates how leasing increases the probability that a household replaces its automobile and how households that lease choose higher quality automobiles. The qualitative choice model of the household's decision to lease provides support for the observation that households that lease face credit con...

Apparatus for obtaining electric energy in speed highways

International Nuclear Information System (INIS)

Khalatyan, P.R.; Khalatyan, R.P.; Khalatyan, E.P.

2012-01-01

The problems of obtaining electricity by means of moving motor-transport are examined. An apparatus installed in the distributive zone of intensive traffic speed highways is proposed. Part of air mass movement of kinetic energy is transformed from the movement of automobiles into electricity

History of automobiles; Jidosha no rekishi

Energy Technology Data Exchange (ETDEWEB)

Iguchi, M. [Japan Automobile Research Institute Inc., Tsukuba (Japan)

2000-01-01

Major automobile production regions moved every-time an innovational automotive technology was invented. When product technology, mass production technology and commercializing technology, product technology for medium and small cars, and lean production technology have emerged in the century, major production regions moved from West Europe to the U.S.,. to revived West Europe again, and Japan joined in the regions successively. A future problem is what technology will change the world distribution of automobile production regions. (author)

Automobile Club CERN

CERN Multimedia

Automobile Club CERN

2010-01-01

 L’Assemblée Générale Ordinaire de «L’Automobile Club du CERN» s’est tenue le mercredi 12 janvier 2010. Le Président, J. Pierlot, souhaite la bienvenue aux membres présents, annonce l’agenda et résume les activités et événements du club pour l’année 2009. Le Club compte environ 600 membres, une petite diminution par rapport aux précédentes années dû surtout aux départs anticipés à la retraite. La cotisation reste inchangée : 50 CHF. Notre trésorier, E. Squadrani, présente de façon détaillée la situation du compte d’exploitation pour 2009 ainsi que le bilan de l’Automobile Club. Les comptes sont équilibrés, la situation de la trés...

Globalization of the automobile industry: traditional locations under pressure?

OpenAIRE

Spatz, Julius; Nunnenkamp, Peter

2004-01-01

Even though the automobile industry is technologically advanced, the increasing integration of low-income countries into the global division of labor has put competitive pressure on traditional automobile producing countries. New end-producers emerged in Asia, Latin America as well as Southern and Central Europe. In addition, the automobile industries of Germany, Japan and the United States engaged in outsourcing of relatively labor intensive segments of the value chain, especially on a regio...

DESIGNING OF AN AUTOMOBILE FLEET NETWORK

Directory of Open Access Journals (Sweden)

R. B. Ivut

2016-01-01

Full Text Available Investment volume is considered as an important factor in regional development under current conditions. Logistical infrastructure which ensures a complex transport, distributive, information and other services exerts a significant influence on regional investment attractiveness. Lack of clear vision on development and execution of development strategy for logistics infrastructure from the side of regional authorities results in unwillingness of large federal and transnational companies to provide investments in infrastructure projects. Network of automotive transport terminals is one of the main elements in logistics infrastructure. The network allows to optimize a flow of material goods from the point of their origin to the point of their consumption with the lowest possible costs and the required level of service. Automobile transport is one of the main objects of transport infrastructure and it is characterized by rather high flexibility in comparison with other types of transport facilities that preconditions its widespread application. Network of automobile fleets (terminals has been formed for redistribution of goods traffic within the concerned regions. The purpose of the present research is to develop a mathematical model for formation of transport infrastructure on the territory of regions. The paper proposes an approach for formation of automobile fleet (terminal network on the territory of a large region with due account of the established network of distribution and sorting-out warehouse facilities. A model has been developed for solving the problem pertaining to minimization of aggregate costs related to maintenance of automobile fleets, delivery of goods to and from distribution and sorting-out warehouse facilities to consumers, ferry of empty trucks and goods handling. The model makes it possible to determine optimal number and location area of automobile fleets (terminals while accounting for their possible locations, capacity

Automobile technology in a CO{sub 2}-constrained world

Energy Technology Data Exchange (ETDEWEB)

Kypreos, S; Barreto Gomez, L; Dietrich, Ph [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Schafer, A; Jacoby, H D [MIT, Cambridge (United States)

1999-08-01

This study identifies the environmental conditions under which less CO{sub 2}-emitting and more expensive automobile technology might enter the North American transportation sector. For that purpose, different exogenous CO{sub 2}-reduction targets are imposed and the resulting market shares of hypothetical future automobile technologies calculated. The criteria for the selection of different types of automobiles/fuels is the minimisation of discounted, cumulative transport sector costs over the scenario time horizon. (author) 1 tab., 6 refs.

Environmental implications of the automobile

International Nuclear Information System (INIS)

1993-01-01

There are over 12 million automobiles in Canada, each travelling over 16,000 km annually. The value of motor vehicles and parts produced in Canada accounts for over 6% of the gross domestic product, and vehicle-related sales account for the largest proportion of Canadian retail activity. The environmental issues related to the high impact of the automobile on Canadian life are discussed. In the manufacture of motor vehicles, over 2 billion kg of metal are used a year; although much of this comes from recycled materials, some depletion of nonrenewable resources is required. It is also estimated that 66-105 GJ of energy are needed to produce a motor vehicle, equivalent to as much as 20% of all the energy consumed during the vehicle's lifetime. Environmental impacts result from this use of resources and energy, including land disturbances and air pollution. Land use impacts are also those related to appropriation of urban and rural land for roadway and service uses, plus pollution of adjoining lands by road runoff. In 1990, the transportation sector used 29% of end-use energy, of which retail gasoline sales for motor vehicles accounted for 54%. Environmental impacts from oil refining, fuel combustion, and waste disposal are described, and programs to mitigate these impacts are outlined. Significant reductions in automobile emissions have already occurred from the increased use of emission control devices, improved fuel efficiency, and stricter standards. Further improvements are possible via such means as better manufacturing procedures, increased recycling of automobile components, better inspection and maintenance, and use of alternative fuels and alternate transportation modes. 35 refs., 3 figs., 4 tabs

Configurations of hybrid-electric cars propulsion systems

OpenAIRE

Cundev, Dobri; Sarac, Vasilija; Stefanov, Goce

2011-01-01

Over the last few years, hybrid electric cars have taken significant role in automotive market. There are successful technological solutions of hybrid-electric propulsion systems implemented in commercial passenger cars. Every automobile manufacturer of hybrid vehicles has unique hybrid propulsion system. In this paper, all implemented systems are described, analyzed and compared.

Automobile control technology and traffic control

Energy Technology Data Exchange (ETDEWEB)

Takaba, Sadao [Univ. of Tokyo (Japan)

1988-09-05

In the field of automobile control technology, electronic was first adopted for the electronic fuel control as an answer to the exhaust gas regulations. The operations of the driving system, frame system or the automobile itself which is the combination of the two were optimized by adding sensors, computers, actuators, etc. to alleviate the burden of the driver, offering easier drivability and confortableness. For local driving control, measurement of distance up to obstacle has been practiced using the ultrasonic radar sensor. Research and development of microwave radar sensor have been carried out for years. Automatic driving has been a dream technology, and the study for the technology was started since early times. Remarkable progress was made recently in the navigation system for traffic control in wide area. New automobile traffic information communication and other systems are being developed. Historical description is made on the control and information systems for road transportation, dividing the period into the 1st, 2nd and 3rd generations. 10 references.

Effects of automobile battery wastes on physicochemical properties ...

African Journals Online (AJOL)

Difference in soil qualities has been noticeable in many soils due to anthropogenic sources, especially of automobile battery wastes. This study examines the effects of automobile battery wastes on the physicochemical properties of the soil. Soil samples for this study were collected in triplicates from three battery chargers' ...

Is the future of mobility electric?

DEFF Research Database (Denmark)

Driscoll, Patrick Arthur; Theodórsdóttir, Ásdis Hlökk; Richardson, Tim

2012-01-01

Planning for sustainable mobility is a complex and demanding task and the knowledge of how to trade off multiple, often conflicting, goals is not entirely clear. One of the most contentious and confounding issues has been, and continues to be, the place of the automobile within the sustainable...... on automobiles, promotion of walking and biking, and support for public transport. The results of a recent pilot study conducted in the Reykjavik city region suggest that electric vehicles may represent a continuation of the dominant transport engineering approach and may in fact draw scarce financial...

Dynamic behavior of the mechanical systems from the structure of a hybrid automobile

Science.gov (United States)

Dinel, Popa; Irina, Tudor; Nicolae-Doru, Stănescu

2017-10-01

In introduction are presented solutions of planetary mechanisms that can be used in the construction of the hybrid automobiles where the thermal and electrical sources must be coupled. The systems have in their composition a planetary mechanism with two degrees of mobility at which are coupled a thermal engine, two revertible electrical machines, a gear transmission with four gears and a differential mechanism which transmits the motion at the driving wheels. For the study of the dynamical behavior, with numerical results, one designs such mechanisms, models the elements with solids in AutoCAD, and obtains the mechanical properties of the elements. Further on, we present and solve the equations of motion of a hybrid automotive for which one knows the dynamical parameters.

Thermal automobile interior model; Thermisches Pkw-Innenraum-Modell

Energy Technology Data Exchange (ETDEWEB)

Flieger, Bjoern; Streblow, Rita; Mueller, Dirk [RWTH Aachen (Germany). E.ON Energieforschungszentrum

2012-11-01

The energy demand of climate-control instruments is an increasingly important focus of study in the automobile industry. The ratio of the energy demand for the engine as opposed to that of other car components will greatly change in the future. Especially for electrical vehicles the auxiliary energy use is very critical because of the limited battery capacity. Thus, the aim of this research project is to investigate means of more efficiently using the available energy by maintaining comfort criteria for all passengers. To realize this, a simulation model of a car interior cabin is being developed with which conclusions can be drawn, under the given boundary conditions, about the air circulation and -states as well as about the resulting energy demand to evaluate the efficiency and the thermal comfort. (orig.)

60 million dollars for electric cars; 60 Millionen Dollar fuer die Formel-EE

Energy Technology Data Exchange (ETDEWEB)

Wedekind, K.

2007-03-15

Rising oil prices are a problem for the automobile industry. A new ambitious electric car was recently presented by an American producer. The Tesla Roadster runs exclusively on electric power. (orig.)

Environmental practices of the auxiliary companies to the Spanish automobile industry

Science.gov (United States)

González-Torre, Pilar L.; González, Beatriz A.; Gupta, Surendra M.

2005-11-01

The automobile manufacturing industry plays a very important role in a country's economy. The importance of automobile manufacturing industry lies in its sheer size and complexity in terms of the direct and indirect influence it commands across many other industries. While millions of people are employed in the automobile manufacturing industry, it is estimated that more than two and half times that number are employed in the auxiliary companies that supply parts to the automobile manufacturing companies. The auxiliary companies represent a group of businesses of various sizes, types, and geographical locations, producing a vast variety of products ranging from the very simple to the extremely intricate. In this study, the current environmental practices of management in the core Spanish auxiliary companies that do business with the automobile manufacturing industry (and thus form a large part of the automobile manufacturing industry's supply chain) are investigated. We show that while automobile manufacturing companies are under scrutiny to become more and more environmentally friendly, not only at their manufacturing stage but also at their products' useful and EOL stages, there appears to be no such burden on the auxiliary companies. Our conclusion is based on an elaborate survey conducted during the fall of 2004 of Spanish auxiliary companies with questions about the characteristics, environmental practices and reverse logistics related activities carried out by the companies.

Local Design & Global Dreams - Emerging Business Models creating the Emergent Electric Vehicle Industry

DEFF Research Database (Denmark)

Rask, Morten; Andersen, Poul Houman; Linneberg, Mai Skjøtt

Electric cars hold the potential to completely alter the interrelationship among actors in the automobile industry architecture. As such they may not only be able to alleviate environmental externalities but also revolutionise the automobile industry as such. This paper is concerned...... with the processes of industry creation for the electric car industry, which is a particular fascinating topic matter as it allows the analysis to provide an understanding of the processes of innovation and of some of its inventors in concert. In continuation of this, the aim of this paper is to describe and analyse...... which emergent business models and corresponding value capturing capabilities can be found in the emerging market for electric cars....

Automotive Electrical and Electronic System II; Automotive Mechanics-Intermediate: 9045.04.

Science.gov (United States)

Dade County Public Schools, Miami, FL.

This automotive electrical and electronic system course is an intermediate course designed for the student who has completed automotive Electrical and Electronic System I. The theory and principles of operation of the components of the starting and charging systems and other electrical accessory systems in the automobile will be learned by the…

Estimates of the cost and energy consumption of aluminum-air electric vehicles

Science.gov (United States)

Cooper, J. F.

1980-11-01

Economic costs and primary energy consumption are estimated for general purpose electric vehicles using aluminum-air propulsion batteries within the time frame of the 1990's (earliest possible date of introduction). For an aluminum-air fuel economy of 36 tonne/km/kg-Al (optimized low-gallium alloys), a total refueling cost of 5.6 cents/km (1979$) was estimated for a 1.27 tonne vehicle. This is equivalent to $2 to 3/gal for automobiles of the same weight with fuel economies of 13.5 to 19.3 tonne-km/liter. The total primary energy consumption was estimated to be 1.3 to 1.7 kWh/km (coal) for the electric vehicle, which corresponds roughly to the energy cost of the automobiles using liquid fuels synthesized from coal. The energy consumption is 30 to 70 percent greater than the reference automobile using petroleum-derived gasoline.

Research and development of electric vehicles for clean transportation.

Science.gov (United States)

Wada, Masayoshi

2009-01-01

This article presents the research and development of an electric vehicle (EV) in Department of Human-Robotics Saitama Institute of Technology, Japan. Electric mobile systems developed in our laboratory include a converted electric automobile, electric wheelchair and personal mobile robot. These mobile systems contribute to realize clean transportation since energy sources and devices from all vehicles, i.e., batteries and electric motors, does not deteriorate the environment. To drive motors for vehicle traveling, robotic technologies were applied.

A bivariate model for analyzing recurrent multi-type automobile failures

Science.gov (United States)

Sunethra, A. A.; Sooriyarachchi, M. R.

2017-09-01

The failure mechanism in an automobile can be defined as a system of multi-type recurrent failures where failures can occur due to various multi-type failure modes and these failures are repetitive such that more than one failure can occur from each failure mode. In analysing such automobile failures, both the time and type of the failure serve as response variables. However, these two response variables are highly correlated with each other since the timing of failures has an association with the mode of the failure. When there are more than one correlated response variables, the fitting of a multivariate model is more preferable than separate univariate models. Therefore, a bivariate model of time and type of failure becomes appealing for such automobile failure data. When there are multiple failure observations pertaining to a single automobile, such data cannot be treated as independent data because failure instances of a single automobile are correlated with each other while failures among different automobiles can be treated as independent. Therefore, this study proposes a bivariate model consisting time and type of failure as responses adjusted for correlated data. The proposed model was formulated following the approaches of shared parameter models and random effects models for joining the responses and for representing the correlated data respectively. The proposed model is applied to a sample of automobile failures with three types of failure modes and up to five failure recurrences. The parametric distributions that were suitable for the two responses of time to failure and type of failure were Weibull distribution and multinomial distribution respectively. The proposed bivariate model was programmed in SAS Procedure Proc NLMIXED by user programming appropriate likelihood functions. The performance of the bivariate model was compared with separate univariate models fitted for the two responses and it was identified that better performance is secured by

Automobile Tire Assessment: A Multi-Criteria Approach

Directory of Open Access Journals (Sweden)

Ateekh-Ur-Rehman

2017-02-01

Full Text Available In response to the present dynamic market, automobile manufacturing industries are constantly evaluating and improving their manufacturing strategies to stay competitive. It is also evident that they evaluate those strategies considering multiple criteria. In one such case, an automobile project manager has to ensure that the selected tire (among the available alternatives complies with the prospective automobile’s performance. This paper presents an approach for the assessment of alternative automobile tires taking into account multiple criteria, such as tire sustainability, tire road performance, environmental issues, tire purchase cost and tire road grip. The presented approach is quite helpful to any decision maker who is interested not only in ranking alternatives but also in establishing the superiority of an alternative over others. The approach also helps to specify the position of each alternative with respect to ideal solution. A case illustration is used to demonstrate an application of the approach.

Illustrating Newton's Second Law with the Automobile Coast-Down Test.

Science.gov (United States)

Bryan, Ronald A.; And Others

1988-01-01

Describes a run test of automobiles for applying Newton's second law of motion and the concept of power. Explains some automobile thought-experiments and provides the method and data of an actual coast-down test. (YP)

Renewing Marketing Strategy in Kenyan Automobile Industry

OpenAIRE

Kalliokuusi, Miriam

2013-01-01

This thesis studies how to renew existing marketing strategies for case company; in so doing, the thesis fulfills its main objective. Company X, a market leader in the Kenyan automobile sector and has various well-known brands under their corporate umbrella. The automobile industry in Kenya has faced some hardship with steady decline in sales in the last couple of years and Mercedes-Benz as a brand suffered under the circumstances. One major cause of the drop in sales is due to the influx of ...

Technology development for meeting with automobiles negotiation

Energy Technology Data Exchange (ETDEWEB)

Chung, Yong Il [Korea Institute of Machinery and Materials, Seoul (Korea)

2000-06-01

The direction of technology development for meeting with automobiles negotiation is to establish a development and supply policy of automobile with the minimum mileage. Furthermore the development policy of diesel car should be promoted with the same level of gasoline engine emission and a new concept of developing clean diesel engine is needed to achieve this goal. Therefore a smoke-filtering device, developed in Korea, should be promoted for supplying and post-process technology development such as SCR and DeNox catalyzer should be promoted.

Proposal of laser-driven automobile

Science.gov (United States)

Yabe, Takashi; Oozono, Hirokazu; Taniguchi, Kazumoto; Ohkubo, Tomomasa; Miyazaki, Sho; Uchida, Shigeaki; Baasandash, Choijil

2004-09-01

We propose an automobile driven by piston motion, which is driven by water-laser coupling. The automobile can load a solar-pumped fiber laser or can be driven by ground-based lasers. The vehicle is much useful for the use in other planet in which usual combustion engine cannot be used. The piston is in a closed system and then the water will not be exhausted into vacuum. In the preliminary experiment, we succeeded to drive the cylindrical piston of 0.2g (6mm in diameter) on top of water placed inside the acrylic pipe of 8 mm in inner diameter and the laser is incident from the bottom and focused onto the upper part of water by the lens (f=8mm) attached to the bottom edge.

Design and simulation of 120 capacity automobile parking control ...

African Journals Online (AJOL)

Design and simulation of 120 capacity automobile parking control system using up/down decade counters. ... leave(s) the parking lot through the exit gate the counter counts down, and the DC motor circuitry drives the entry gate open to allow access for the same number of automobiles that leave(s) the parking lot.

Energy autonomous sensors in the automobile; Energieautarke Sensorik im Automobil

Energy Technology Data Exchange (ETDEWEB)

Kuehne, Ingo [Hochschule Heilbronn (Germany). Studiengang Energieoekologie; Schreiter, Matthias [Siemens AG, Muenchen (Germany); Li, Xiaoming [Daimler AG, Sindelfingen (Germany); Hehn, Thorsten [Hahn-Schickard-Gesellschaft fuer angewandte Forschung e.V., Freiburg (Germany). HSG-IMIT, Inst. fuer Mikro- und Informationstechnik; Thewes, Marcell; Scholl, Gerd [Helmut-Schmidt-Univ., Univ. der Bundeswehr, Hamburg (Germany); Wagner, Dieter [Continental Automotive GmbH, Regensburg (Germany); Manoli, Yiannos [Univ. Freiburg (Germany). IMTEK; Frey, Alexander [Hochschule Augsburg (Germany). Fakultaet Elektrotechnik

2013-04-01

A brief outline of energy autonomous sensors in the automobile is given. For this purpose the variety of sensors in today's automotive vehicles is reported. The rationale for the deployment of energy autonomous sensors is given. In addition the potential of using environmental energy and the possibilities of their energy conversion are presented. As part of the funded project ASYMOF, two pioneer applications - a tire pressure monitoring and an anti-theft alarm system - are studied and discussed.

Pulmonary function in automobile repair workers

Directory of Open Access Journals (Sweden)

Chattopadhyay O

2007-01-01

Full Text Available Background : Automobile repair shop is a place where workers are exposed to harmful chemicals and toxic substances. Objective : To study the occurrence of obstructive and restrictive pulmonary impairment among automobile garage workers. Methods : A cross sectional study involving 151 automobile garage workers from 14 randomly selected garages of urban Kolkata. The study variables were Forced Expiratory Volume in 1 second (FEV 1 , Forced Vital Capacity (FVC, Peak Expiratory Flow Rate (PE FR, age, smoking habit, duration of work, type of work, and respiratory symptoms. The study was analysed using Regression equations, and Chi-square test. Results : All the workers were male. Obstructive impairment was seen in 25.83% of the workers whereas restrictive impairment was seen in 21.19% of the workers. Mixed obstructive and restrictive impairment was seen in 10.6% of the workers. The frequency of obstructive impairment was higher in older workers. In the age group of less than 20 years, 13.6% of the workers had obstructive impairment while 42.86% of workers above 40 years of age had obstructive impairment. Obstructive impairment was more frequently observed in battery repair workers (58.33% and spray painters (37.5% while 16.67% of the body repair workers and 30.19% of the engine mechanics had obstructive impairment. Obstructive impairment was more frequently observed in smokers (53.1 % as compared to ex-smokers (33.3% and non-smokers (6.4%. Obstructive impairment was more frequently observed in workers who had been working for a longer duration. Conclusion: Nearly 36.4% of the automobile garage workers had some form of pulmonary function impairment; obstructive and/or restrictive. The use of personal protective equipment, worker education, and discontinuation of the use of paints containing toxic pigments are recommended.

Corrosion protection and finishing of automobiles

International Nuclear Information System (INIS)

Sheikh, S.T.

2005-01-01

finishing of automobiles is an important aspect. There have been considerable reductions of weight in automobiles by the use of composites components replacing heavy metallic components. Fenders previously based on metal have been replaced with plastic and painted with the same colour shade as of the metallic body, this has eps for proper adhesion of the paints on the plastic fender to avoid chipping off the paint form it. This paper discusses the necessary processes required for finishing of an automobile along with the corrosion protection measures. Automobiles contains a variety of engineering materials, engine main body fuel tanks connecting rods heat radiators and other mechanical parts are made from different types of engineering alloys having varying chemical compositions. Other parts like dashboard, front panel and other are made from composites. The main body made from cold roll ed steel having various contours 'c' it due to the different designs is the potential site for corrosion attack, The main body is exposed to the hostile environment through out its life period. An automobile is given a particular finish with a view to counter the hostile environments as they are not limited for plying in a limiting conditions and are taken to different weather conditions in one day thus facing severe stresses and strain. Thus it is essential that an automobile before rolling 'out of the assembly line should properly corrosion resistant and aesthetically pleasant also. Finishing for automobiles being very specialized, the main requirement being maximum durability with minimum numbers of coats baked, at the fastest possible schedule. High gloss and range of good eye catching colours being important to increase sales appeal. In the near past the car finishes were based on alkyd-amino resins baking materials and force drying lacquers, which have excellent appearance originally and maintain it on aging. The finishing system for the synthetic baking type may consist of

An impending platinum crisis and its implications for the future of the automobile

International Nuclear Information System (INIS)

Yang, C.-J.

2009-01-01

The global demand for platinum has consistently outgrown supply in the past decade. This trend likely will continue and the imbalance may possibly escalate into a crisis. Platinum plays pivotal roles in both conventional automobile emissions control and the envisioned hydrogen economy. A platinum crisis would have profound implications on energy and environment. On the one hand, inadequate platinum supply will prevent widespread commercialization of hydrogen fuel-cell vehicles. On the other hand, expensive platinum may enhance the competitiveness of hybrid, plug-in hybrid, and battery-powered electric cars. Policymakers should weigh the potential impacts of a platinum crisis in energy policy.

Design of an Automatic Forward and Back Collision Avoidance System for Automobiles

Directory of Open Access Journals (Sweden)

Tasneem Sanjana

2018-01-01

Full Text Available This paper is the extended reflection of work originally presented in conference of Electrical, Computer and Communication Engineering (ECCE-CUET 2017, entitled “Automated Anti Collision System for Automobiles”. Automated collision avoidance system is a trending technology of science in automobile engineering. The aim of this paper is to design a system which will prevent collision from the front as well as the back for automobiles. This paper gives an overview of secure and smooth journey of car (vehicles as well as the certainty of human life. This system is controlled by microcontroller ATMEGA32. Two Sharp distance sensors are used to detect object within the danger range where one is for front detection and other is for back detection. A crystal oscillator is used to produce the oscillation and generates the clock pulse of the microcontroller. An LCD and a GLCD are used to give information about the safe distance for front and rear respectively, and a buzzer is used as alarm. An actuator is used as automatic brake and inside the actuator there is a motor driver that runs the actuator. For coding “microC PRO for PIC” is used and “Proteus Design Suite Version 8 Software” is used for simulation.

Automobile characteristics historical data base

Science.gov (United States)

1977-08-01

A collection of data concerning the physical, operating, and performance characteristics of automobiles for the model years 1955, 1960, 1965, 1968, and 1970 to 1974. Data is to be added to the data base already established by DOT/TSC, for the 1975 mo...

Plug-In Electric Vehicle Handbook for Consumers (Brochure)

Energy Technology Data Exchange (ETDEWEB)

2011-09-01

Plug-in electric vehicles (PEVs) are entering the automobile market and are viable alternatives to conventional vehicles. This guide for consumers describes the basics of PEV technology, PEV benefits, how to select the right PEV, charging a PEV, and PEV maintenance.

DEVELOPING CONVENIENT MOTOR SELECTION ALGORITHM ACCORDING TO ROAD CONDITIONS IN ELECTRIC VEHICLES

OpenAIRE

BAŞER, EKREM; ALTUN, YUSUF

2016-01-01

Nowadays, automotive industry is tending to electric vehicles due to reduction of fuel reserves in order to save energy, reduce air pollution and carbon emission. With the impact of technological advencements on battery and power electronics, the studies on electric vehicles have been gradually increased and many of automobile manifacturers have produced new electric vehicles. Different type of electric motors has been tried on electric vehicles until today. This motors have difference feautu...

Electricity market design for the prosumer era

OpenAIRE

Parag, Yael; Sovacool, Benjamin

2016-01-01

Prosumers are agents that both consume and produce energy. With the growth in small and medium-sized agents using solar photovoltaic panels, smart meters, vehicle-to-grid electric automobiles, home batteries and other ‘smart’ devices, prosuming offers the potential for consumers and vehicle owners to re-evaluate their energy practices. As the number of prosumers increases, the electric utility sector of today is likely to undergo significant changes over the coming decades, offering possibili...

Technological trends in automobiles.

Science.gov (United States)

Horton, E J; Compton, W D

1984-08-10

Current technological trends in the automotive industry reflect many diverse disciplines. Electronics and microprocessors, new engine transmission concepts, composite and ceramic materials, and computer-aided design and manufacture will combine to make possible the creation of advanced automobiles offering outstanding quality, fuel economy, and performance. A projected "average" vehicle of the 1990's is described to illustrate the application of these new concepts.

Solar and electric automobiles: An idea whose time has come; Automoviles solares y electricos: Una idea cuyo tiempo ha llegado

Energy Technology Data Exchange (ETDEWEB)

Padilla, Beatriz [Academia de la Investigacion Cientifica, A. C., Mexico, D. F. (Mexico)

1993-12-31

Given the dependence of our transport system in combustible hydrocarbons that, besides generating serious pollution levels, eventually will become scarce, severely affecting the world economy- it is compulsory to develop non polluting transportation, capable of operating with alternative energies. In the avant-guard of this technological achievement are the competition solar automobiles, that have made great contributions (particularly for the rigorous application of the design for efficiency principles) in the development of the applicable technology to the electric vehicles. Tonatiuh is the first competition solar car built in Mexico. In 1993 Tonatiuh will compete in the Rally Formula Sol in Mexico and in the World Solar of Australia. A superficial comparison of electric vehicles with vehicles equipped with internal combustion motors, demonstrates the great advantages of the first ones, most of all at the light of the current technological advances propitiated by laws that demand them for the sale of electric vehicles. This incipient industry presents a great opportunity for Mexico, since the markets are not saturated and exist large areas of research and development. For improvement of the air quality in Mexico city, the electric vehicle would have a very positive impact, mostly applied to public transportation. [Espanol] Dada la dependencia de nuestro sistema de transporte en hidrocarburos combustibles que, ademas de generar graves niveles de contaminacion eventualmente escacearan, afectando severamente la economia mundial - es imperativo desarrollar transportes no contaminantes capaces de operar con energias alternativas. En la vanguardia de esta avanzada tecnologia se encuentran los autos solares de carreras, los cuales han hecho grandes aportaciones (particularmente por la aplicacion rigurosa de los principios del diseno para eficiencia) el desarrollo de tecnologia aplicable a vehiculos electricos. Tonatiuh es el primer auto solar de carreras que se

Solar and electric automobiles: An idea whose time has come; Automoviles solares y electricos: Una idea cuyo tiempo ha llegado

Energy Technology Data Exchange (ETDEWEB)

Padilla, Beatriz [Academia de la Investigacion Cientifica, A. C., Mexico, D. F. (Mexico)

1992-12-31

Given the dependence of our transport system in combustible hydrocarbons that, besides generating serious pollution levels, eventually will become scarce, severely affecting the world economy- it is compulsory to develop non polluting transportation, capable of operating with alternative energies. In the avant-guard of this technological achievement are the competition solar automobiles, that have made great contributions (particularly for the rigorous application of the design for efficiency principles) in the development of the applicable technology to the electric vehicles. Tonatiuh is the first competition solar car built in Mexico. In 1993 Tonatiuh will compete in the Rally Formula Sol in Mexico and in the World Solar of Australia. A superficial comparison of electric vehicles with vehicles equipped with internal combustion motors, demonstrates the great advantages of the first ones, most of all at the light of the current technological advances propitiated by laws that demand them for the sale of electric vehicles. This incipient industry presents a great opportunity for Mexico, since the markets are not saturated and exist large areas of research and development. For improvement of the air quality in Mexico city, the electric vehicle would have a very positive impact, mostly applied to public transportation. [Espanol] Dada la dependencia de nuestro sistema de transporte en hidrocarburos combustibles que, ademas de generar graves niveles de contaminacion eventualmente escacearan, afectando severamente la economia mundial - es imperativo desarrollar transportes no contaminantes capaces de operar con energias alternativas. En la vanguardia de esta avanzada tecnologia se encuentran los autos solares de carreras, los cuales han hecho grandes aportaciones (particularmente por la aplicacion rigurosa de los principios del diseno para eficiencia) el desarrollo de tecnologia aplicable a vehiculos electricos. Tonatiuh es el primer auto solar de carreras que se

Injury Source and Correlation Analysis of Riders in Car-Electric Bicycle Accidents

Directory of Open Access Journals (Sweden)

Tiefang Zou

2018-01-01

Full Text Available The knowledge about the injury source and correlation of riders in car-electric bicycle accident will be helpful in the cross validation of traces and vehicle safety design. In order to know more information about such kind of knowledge, 57 true car-electric bicycle accidents were reconstructed by PC-Crash and then data on injury information of riders were collected directly from the reconstructed cases. These collected data were validated by some existing research results firstly, and then 4 abnormal cases were deleted according to the statistical method. Finally, conclusions can be obtained according to the data obtained from the remaining 53 cases. Direct injuries of the head and right leg are from the road pavement upon low speed; the source laws of indirect head injuries are not obvious. Upon intermediate and high speed, the injuries of the above parts are from automobiles. Injuries of the left leg, femur, and right knee are from automobiles; left knee injuries are from automobiles, the road pavement and automobiles, respectively, upon low, intermediate, and high speed. The source laws of indirect torso injuries are not obvious upon intermediate and low speed, which are from automobiles upon high speed, while direct torso injuries are from the road pavement. And there is no high correlation between all parts of the injury of riders. The largest correlation coefficient was the head-left femur and left femur-right femur, which was 0.647, followed by the head-right femur (0.638 and head-torso which was 0.617.

Injury Source and Correlation Analysis of Riders in Car-Electric Bicycle Accidents.

Science.gov (United States)

Zou, Tiefang; Yi, Liang; Cai, Ming; Hu, Lin; Li, Yuelin

2018-01-01

The knowledge about the injury source and correlation of riders in car-electric bicycle accident will be helpful in the cross validation of traces and vehicle safety design. In order to know more information about such kind of knowledge, 57 true car-electric bicycle accidents were reconstructed by PC-Crash and then data on injury information of riders were collected directly from the reconstructed cases. These collected data were validated by some existing research results firstly, and then 4 abnormal cases were deleted according to the statistical method. Finally, conclusions can be obtained according to the data obtained from the remaining 53 cases. Direct injuries of the head and right leg are from the road pavement upon low speed; the source laws of indirect head injuries are not obvious. Upon intermediate and high speed, the injuries of the above parts are from automobiles. Injuries of the left leg, femur, and right knee are from automobiles; left knee injuries are from automobiles, the road pavement and automobiles, respectively, upon low, intermediate, and high speed. The source laws of indirect torso injuries are not obvious upon intermediate and low speed, which are from automobiles upon high speed, while direct torso injuries are from the road pavement. And there is no high correlation between all parts of the injury of riders. The largest correlation coefficient was the head-left femur and left femur-right femur, which was 0.647, followed by the head-right femur (0.638) and head-torso which was 0.617.

The Antecedents of Automobile Brand Loyalty: Evidence from Malaysian

OpenAIRE

Mabkhot, Hashed Ahmed; Salleh, Salniza MD; Shaari, Hasnizam

2016-01-01

This study empirically examined the mediating effect of brand satisfaction on the relationship between brand image and brand loyalty among Malaysian customer toward local automobile brands. Four hypotheses were developed to test hypothesizing relationships among brand image, brand satisfaction on brand loyalty. Data collected from customers of automobile brands in north Malaysia peninsula from three states which were Kedah, Penang, and Perlis. This study applies partial least squares to a sam...

Examination of Energy Efficiency Increasing Measures in an Automobile Assembly Plant

Directory of Open Access Journals (Sweden)

Fatma ÇANKA KILIÇ

2018-03-01

Full Text Available In this study, energy consumption analysis was performed in a car assembly plant (Body-inWhite (BiW productions, painting processes, chassis and accessory assembly processes. Examined automobile assembly plant has a production capacity of 200,000 vehicles per year by working six days a week and three shifts a day. Highly energy consuming processes are determined. Energy efficiency increasing opportunities in energy consuming systems (paint shop, drying ovens, compressed air, heating and cooling systems and effects of current automotive assembly techniques on energy efficiency are examined. Most of the total energy in the studied plant is consumed in the paint shop. Considering annual energy consumption; paint shop is responsible for the %50 of total electrical energy and %70 of total natural gas consumption. Specific energy consumption of plant is calculated as 853 kWh (SET; 275 kWh for electricity consumption (SETe , and 578 kWh for natural gas (SETdg . By performing determined energy efficiency measures; SET of plant will reduce %1 for the SETe , and %5,7 for SETdg

Reducing automobile traffic: an urgent policy for health promotion

Directory of Open Access Journals (Sweden)

Tapia Granados José A.

1998-01-01

Full Text Available In recent decades traffic injuries have become a leading cause of death and disability the world over. In congested urban areas, the noise and emissions from vehicle engines cause discomfort and disease. More than one billion people are exposed daily to harmful levels of atmospheric contamination. Because internal combustion generates carbon dioxide (CO2 , the automobile is a principal contributor to the greenhouse effect, which has significantly raised the temperature of the atmosphere. Scientists anticipate that in coming decades the greenhouse effect will produce alterations in climate that are very likely to be harmful and possibly catastrophic. Meanwhile, burgeoning traffic and rural and urban highway infrastructures are already among the principal causes of environmental degradation. Urban development, because it is nearly always "planned" to accommodate automobiles rather than people, reduces the quality of life and tears the social fabric. In contrast to private automobiles, public transportation, bicycles, and walking produce little environmental contamination or injury-related morbidity and mortality. These modes of transport involve more physical activity, with its positive health effects, and avoid contributing to the greenhouse effect. The reduction of automobile traffic and substitution of alternative modes of transport are essential policies for health promotion. They should be incorporated in "healthy cities" programs and general economic policies.

Empirical Analysis of Green Supply Chain Management Practices in Indian Automobile Industry

Science.gov (United States)

Luthra, S.; Garg, D.; Haleem, A.

2014-04-01

Environmental sustainability and green environmental issues have an increasing popularity among researchers and supply chain practitioners. An attempt has been made to identify and empirically analyze green supply chain management (GSCM) practices in Indian automobile industry. Six main GSCM practices (having 37 sub practices) and four expected performance outcomes (having 16 performances) have been identified by implementing GSCM practices from literature review. Questionnaire based survey has been made to validate these practices and performance outcomes. 123 complete questionnaires were collected from Indian automobile organizations and used for empirical analysis of GSCM practices in Indian automobile industry. Descriptive statistics have been used to know current implementation status of GSCM practices in Indian automobile industry and multiple regression analysis has been carried out to know the impact on expected organizational performance outcomes by current GSCM practices adopted by Indian automobile industry. The results of study suggested that environmental, economic, social and operational performances improve with the implementation of GSCM practices. This paper may play an important role to understand various GSCM implementation issues and help practicing managers to improve their performances in the supply chain.

Environmental change and hedonic cost functions for automobiles.

Science.gov (United States)

Berry, S; Kortum, S; Pakes, A

1996-11-12

This paper focuses on how changes in the economic and regulatory environment have affected production costs and product characteristics in the automobile industry. We estimate "hedonic cost functions" that relate product-level costs to their characteristics. Then we examine how this cost surface has changed over time and how these changes relate to changes in gas prices and in emission standard regulations. We also briefly consider the related questions of how changes in automobile characteristics, and in the rate of patenting, are related to regulations and gas prices.

Environmental change and hedonic cost functions for automobiles

Science.gov (United States)

Berry, Steven; Kortum, Samuel; Pakes, Ariel

1996-01-01

This paper focuses on how changes in the economic and regulatory environment have affected production costs and product characteristics in the automobile industry. We estimate “hedonic cost functions” that relate product-level costs to their characteristics. Then we examine how this cost surface has changed over time and how these changes relate to changes in gas prices and in emission standard regulations. We also briefly consider the related questions of how changes in automobile characteristics, and in the rate of patenting, are related to regulations and gas prices. PMID:8917486

Optimization of Thermoelectric Components for Automobile Waste Heat Recovery Systems

Science.gov (United States)

Kumar, Sumeet; Heister, Stephen D.; Xu, Xianfan; Salvador, James R.

2015-10-01

For a typical spark ignition engine approximately 40% of available thermal energy is lost as hot exhaust gas. To improve fuel economy, researchers are currently evaluating technology which exploits exhaust stream thermal power by use of thermoelectric generators (TEGs) that operate on the basis of the Seebeck effect. A 5% improvement in fuel economy, achieved by use of TEG output power, is a stated objective for light-duty trucks and personal automobiles. System modeling of thermoelectric (TE) components requires solution of coupled thermal and electric fluxes through the n and p-type semiconductor legs, given appropriate thermal boundary conditions at the junctions. Such applications have large thermal gradients along the semiconductor legs, and material properties are highly dependent on spatially varying temperature profiles. In this work, one-dimensional heat flux and temperature variations across thermoelectric legs were solved by using an iterative numerical approach to optimize both TE module and TEG designs. Design traits were investigated by assuming use of skutterudite as a thermoelectric material with potential for automotive applications in which exhaust gas and heat exchanger temperatures typically vary from 100°C to over 600°C. Dependence of leg efficiency, thermal fluxes and electric power generation on leg geometry, fill fractions, electric current, thermal boundary conditions, etc., were studied in detail. Optimum leg geometries were computed for a variety of automotive exhaust conditions.

Colleges Drive Research on Electric Cars

Science.gov (United States)

Basken, Paul

2009-01-01

As the General Motors Corporation shuts assembly plants and veers toward bankruptcy, the lonely remnants of one of its top technological achievements--the first modern mass-produced electric car--lie scattered across a few dozen American college campuses. GM produced and leased to customers more than 1,000 "EV1" automobiles beginning in 1996. In…

Mind the Gap: The Vicious Circle of Measuring Automobile Fuel Use

DEFF Research Database (Denmark)

Figueroa, Maria; author), L. Schipper (main; Price, L.

1993-01-01

We review the circularity between estimates of automobile use, fuel consumption and fuel intensity. We find that major gaps exist between estimates of road gasoline, the quantity most often used to represent automobile fuel use in economic studies of transport fuel use, and the actual sales data...

Electric revenge after 100 years? Comparing car market patterns around 1900 and 2000

NARCIS (Netherlands)

Dijk, Marc

2016-01-01

During the closing years of the nineteenth century electric vehicles (EV) outsold every other type of vehicle. Yet within ten years the electric automobile was no more and the internal combustion engined car predominated. Could EVs have succeeded or was the technology – in particular the batteries –

Production of spheroidal graphite cast iron (S. G. Iron) for an automobile brake drum

International Nuclear Information System (INIS)

Butt, M.T.Z.; Aziz, S.

2005-01-01

The role of automobile industry for any country has a great importance. Break drum is one of the essential parts of automobile car and its local casting is required in order to achieve the target for automobile industry because it has special significance. Break drum being the important constituent of the system of an automobile requires a great degree of accuracy and reliability. S. G. Iron is preferred because of its mechanical properties i.e., higher strength modulus, impact resistance and ductility along with excellent machinability and manufacturing ease. (author)

Essays on Competition and Innovations in the Automobile Markets

OpenAIRE

Leheyda, Nina

2007-01-01

The central focus of my dissertation has been on the investigation of developments towards more competitive and innovative firm behaviour in the global automobile markets. The automobile companies meet each other in many product and geographical markets worldwide. A large proportion of their production is outside of their "home" country. In my work I focus on international most important car markets, namely US, European and German as the most important single European car market and a very in...

Atmospheric pollution coming from automobiles and public health

International Nuclear Information System (INIS)

Chiron, M.; Quenel, Ph.; Zmirou, D.

1997-01-01

The air pollution coming from automobile is responsible of different diseases in respiratory or cardiovascular system. epidemiological studies in professional or general media give information in term of public health. If the role of air pollution from automobile at short terms is well established, for effects at long term (such cancers or chronic diseases of respiratory system) the measurement or estimation of the exposure is not sufficient for the moment and makes the epidemiology unable to quantify effects. In spite of these lacks, it is important to reduce the risk for the most fragile people. (N.C.)

Substance flow analysis and environmental releases of PBDEs in life cycle of automobiles.

Science.gov (United States)

Choi, Jonghyun; Jang, Yong-Chul; Kim, Jong-Guk

2017-01-01

Polybrominated diphenyl ethers (PBDEs), a class of brominated flame retardants, have been widely used in many applications in industry such as automobiles, textiles, and electronics. This study focused on a quantitative substance flow analysis (SFA) of PBDEs in automobiles in order to identify their flow by life cycle and treatment pathways of PBDEs-containing materials in end-of-life vehicles (ELVs) in Korea. In addition, this study has estimated environmental releases of PBDEs in automobiles by life cycle in Korea. During this study, PBDEs were analyzed for the samples collected from several ELVs treatment facilities using X-ray fluorescence and gas chromatography/mass spectrometry (GC/MS) methods. The system boundary for SFA of PBDEs ranged from manufacturing/trade to disposal stage of automobiles by life cycle. Based on the result of the SFA, it was found that the amount of PBDEs in automobiles were the highest in use stage (7748ton/year), followed by production stage (1743ton/year) in 2014. In disposal stage, automobile shredded residues (ASR) and seat fabrics were the main components with relatively high levels of PBDEs in ELVs. The major treatment methods of such components included incineration (84%), energy recovery (9%), and landfilling (6%). This research indicates that PBDEs were emitted the highest amount from interior components during the use stage of automobiles, followed by recycling processes such as dismantling and shredding. This study suggests that PBDEs in ASR and seat fabrics should be properly managed to prevent the widespread dispersion in the environment. Copyright © 2016 Elsevier B.V. All rights reserved.

Integrated study for automobile wastes management and ...

African Journals Online (AJOL)

Administrator

Key words: Soil contamination, storm water treatment, emission testing, EPR, heavy metals. INTRODUCTION .... fractionation in soil profiles at automobile mechanic waste ...... The phyto-remediation technique modifies plants to take.

STRATEGIC ENTREPRENEURSHIP: A CASE IN THE BRAZILIAN AUTOMOBILE INDUSTRY

Directory of Open Access Journals (Sweden)

Afonso Carneiro Lima

2010-07-01

Full Text Available This work addresses an entrepreneurial phenomenon of strategic administration within the automobile industry: the creation of the automaker Troller Veículos Especiais (TVE. The case study at hand is justified by the positioning of this company around two market niches and its relative success in an industry characterized by few and powerful players. Our aim was to analyze the entrepreneurial and strategic process of discovering opportunity, the analysis used for internal and external factors, and the adoption of its strategic positioning in exploring two automobile market niches: in the B2B market, vehicles adapted to specific operational functions; and in the B2C, off-road vehicles with a strong appeal to consumers’ life styles. This case study allowed us to visualize the challenging path of a genuinely Brazilian small company in a sector dominated by large multinational groups, besides demonstrating decision-related dilemmas and aspects related to managerial creativity.Key-words: Automobile industry. Case study. Strategic entrepreneurship. Discovery theory. Strategic positioning.

Plug-In Electric Vehicle Handbook for Fleet Managers (Brochure)

Energy Technology Data Exchange (ETDEWEB)

2012-04-01

Plug-in electric vehicles (PEVs) are entering the automobile market and are viable alternatives to conventional vehicles. This guide for fleet managers describes the basics of PEV technology, PEV benefits for fleets, how to select the right PEV, charging a PEV, and PEV maintenance.

Chery Automobile: Chinese Firms catching up

NARCIS (Netherlands)

Y. Zhang (Ying); S.Y. Yang (Sheng Yun)

2015-01-01

textabstractChery Automobile is a top Chinese car exporter. Due to the global financial crisis, intense competition, and fast technological change, Chery has seen decreasing sales domestically and diminishing opportunities abroad. The carmaker needs to figure out the next stage of strategic

Thermal energy storage for the Stirling engine powered automobile

Science.gov (United States)

Morgan, D. T. (Editor)

1979-01-01

A thermal energy storage (TES) system developed for use with the Stirling engine as an automotive power system has gravimetric and volumetric storage densities which are competitive with electric battery storage systems, meets all operational requirements for a practical vehicle, and can be packaged in compact sized automobiles with minimum impact on passenger and freight volume. The TES/Stirling system is the only storage approach for direct use of combustion heat from fuel sources not suitable for direct transport and use on the vehicle. The particular concept described is also useful for a dual mode TES/liquid fuel system in which the TES (recharged from an external energy source) is used for short duration trips (approximately 10 miles or less) and liquid fuel carried on board the vehicle used for long duration trips. The dual mode approach offers the potential of 50 percent savings in the consumption of premium liquid fuels for automotive propulsion in the United States.

Hinderniserkennung und -verfolgung mit einer PMD-kamera im automobil

Science.gov (United States)

Schamm, Thomas; Vacek, Stefan; Natroshvilli, Koba; Marius Zöllner, J.; Dillmann, Rüdiger

Die Detektion von Hindernissen vor dem Automobil ist eine Hauptanforderung an moderne Fahrerassistenzsysteme (FAS). In dieser Arbeit wird ein System vorgestellt, das mit Hilfe einer PMDKamera (Photomischdetektor) Hindernisse auf der Fahrspur erkennt und deren relevante Parameter bestimmt. Durch die PMD-Kamera werden zunächst 3D-Tiefenbilder der Fahrzeugumwelt generiert. Nach einem initialen Filterprozess werden im Tiefenbild mit Hilfe eines Bereichswachstumsverfahrens Hindernisse gesucht. Zur Stabilisierung des Verfahrens und zur Parameterberechnung wird ein Kaiman Filter eingesetzt. Das Ergebnis ist eine Liste aller Hindernisse im Fahrbereich des Automobils.

Fiscal 2000 achievement report on the venture business assisting type regional consortium - Core industry creation type. Thermoelectric energy recovery system for automobile; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo seika hokokusho. Jidoshayo netsuden energy kaishu system

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The project aims to develop a system for recovering heat from the thermal energy of automobile exhaust in the form of electric energy. Skutterudite based thermoelectric materials for high temperature use and existing thermoelectric materials for low/middle temperature use were improved in performance, and a dimensionless thermoelectric performance index of ZT=1 was attained. Advanced processes were applied for improvement on the performance of existing thermoelectric materials. In the effort to develop technologies for the mass production of thermoelectric materials for high temperature use, a material manufacturing process was established for manufacturing materials excellent in thermoelectric and mechanical properties using a method for mass-producing sinterable materials by gas atomization and a large discharge plasma sintering process capable of treating large specimens. In the effort to improve automobile power generation modules in performance and to establish element technologies for their manufacture, technologies were developed involving thermoelectric materials and electrodes, bonding of different thermoelectric materials, bonding of heat conducting electrical insulators and electrodes, and high efficiency segment type power generation modules. A high performance automobile exhaust gas heat exchanger was developed. A Co-Sb based thermoelectric module and a Bi-Te based module were combined and the package was tested aboard automobiles, when a maximum power output of 83W was achieved. It is necessary to review module arrangement. (NEDO)

Design of a TFT-LCD Based Digital Automobile Instrument

Directory of Open Access Journals (Sweden)

Yunsong Xu

2014-01-01

instrument and gives an introduction to the sampling circuits and interfaces related to these signals. Following this is the functional categorizing of the circuit modules, such as video buffer circuit, CAN bus interface circuit, and TFT-LCD drive circuit. Additionally, the external EEPROM stores information of the vehicle for history data query, and the external FLASH enables the display of high quality figures. On the whole, the accomplished automobile instrument meets the requirements of automobile instrument markets with its characters of low cost, favorable compatibility, friendly interfaces, and easy upgrading.

Application of Wireless Sensor Networks to Automobiles

Science.gov (United States)

Tavares, Jorge; Velez, Fernando J.; Ferro, João M.

2008-01-01

Some applications of Wireless Sensor Networks (WSNs) to the automobile are identified, and the use of Crossbow MICAz motes operating at 2.4 GHz is considered together with TinyOS support. These WSNs are conceived in order to measure, process and supply to the user diverse types of information during an automobile journey. Examples are acceleration and fuel consumption, identification of incorrect tire pressure, verification of illumination, and evaluation of the vital signals of the driver. A brief survey on WSNs concepts is presented, as well as the way the wireless sensor network itself was developed. Calibration curves were produced which allowed for obtaining luminous intensity and temperature values in the appropriate units. Aspects of the definition of the architecture and the choice/implementation of the protocols are identified. Security aspects are also addressed.

Effects of Automobile Emissions on Air Pollution in the United States

Science.gov (United States)

Cohen, Ryan; Singh, Ramesh

2016-07-01

Currently, about more than 253,000,000 automobiles and trucks, some are new, old, gas and electric, ply on the roads in the United States of America. Around the world, human activities and energy demand are the main sources for the air pollution and ozone depletion, causing dense haze, fog and smog especially during winter season in the country like China and India and also observed in different parts of the world. In recent years, automakers have been pushed by new governmental regulations and global expectations to create more fuel-efficient vehicles that burn less fossil fuels and create fewer harmful emissions. Automakers are exploring alternative fuel options such as hydrogen, natural gas, hybrids, and completely electric vehicles. Since the Nissan Leaf's introduction in 2010, fully electric vehicles have become widely produced and just fewer than 400,000 fully electric cars have been sold in the United States. Taking the influx of more fuel-efficient and alternative energy vehicles in the market into account, we have analyzed satellite and ground observed atmospheric pollution and greenhouse gases during 2009-2014 in the United States of America. Our results show that the increasing population of hybrid and fuel efficient vehicles have cut down the atmospheric pollution and greenhouse emissions in US in general, whereas in California the pollution level has increased as a result frequency of fog and haze events are seen during winter season. We will present a comparison of atmospheric pollution over US and California State in view of the increasing hybrid and fuel efficient vehicles.

Clean Cities Plug-In Electric Vehicle Handbook for Fleet Managers

Energy Technology Data Exchange (ETDEWEB)

None

2012-04-01

Plug-in electric vehicles (PEVs) are entering the automobile market and are viable alternatives to conventional vehicles. This guide for fleet managers describes the basics of PEV technology, PEV benefits for fleets, how to select the right PEV, charging a PEV, and PEV maintenance.

Divorce your car: ending the love affair with the automobile

Energy Technology Data Exchange (ETDEWEB)

Alvord, K.

2000-07-01

This book is a guide for people wishing to liberate themselves from their addiction to cars and the automobile culture. It is a repository of examples and actions that individuals and communities can take to reduce dependence on the automobile. The range of possibilities run from using cars less to not owning one at all. The book provides a humorous yet clear-headed approach to a greener world and maps out the road to how people can live happily ever after by breaking free of 'auto-cracy', without insisting on people in car-dependent countries quit their automotive addiction instantly. Nevertheless, it clearly articulates the connection between automobiles, their arteries (i.e. highways) and effluents (i.e. greenhouse gases and particulate emissions), and the increasing number and severity of natural disasters between the urban renewal and freeway construction that, in the author's view, helped ignite the riots in Watts, Newark and Detroit. The disastrous societal and geophysical effects of the automobile are demonstrated in great abundance, and the mountain of evidence of the systematic abuse of the planet that the book provides is a stunning refutation of the notion that technology is neutral. The automobile is accused of being not only the linchpin of Western and primarily American industrialism and resource extraction, it is also accused of being the chief suspect in a century-long theft of time, conviviality and beauty. How to bring about a change in people's love affair with their cars is difficult to comprehend but this author has a multitude of useful suggestions which seem to suggest that it is possible. There is a list of 104 'selected references' and an extensive list of 'other resources'.

Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

Energy Technology Data Exchange (ETDEWEB)

Lin Gan [Center for International Climate and Environmental Research, Oslo (Norway)

2003-05-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analysed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis. (author)

Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

Energy Technology Data Exchange (ETDEWEB)

Gan Lin E-mail: lin.gan@cicero.uio.no

2003-05-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis.

Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

International Nuclear Information System (INIS)

Gan Lin

2003-01-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis

The inspection of components by X ray in real time in automobile industry

International Nuclear Information System (INIS)

Demandt, K.

1987-01-01

Besides a brief introduction to the state of the art of automobile components inspection by radiography in real time, some examples are discussed. New developments and a possible application for automobile components inspection by x-radiation are discussed. (E.G.) [pt

The effect of airline deregulation on automobile fatalities.

Science.gov (United States)

Bylow, L F; Savage, I

1991-10-01

This paper attempts to quantify the effects of airline deregulation in the United States on intercity automobile travel and consequently on the number of highway fatalities. A demand model is constructed for auto travel, which includes variables representing the price and availability of air service. A reduced form model of the airline market is then estimated. Finding that deregulation has decreased airfares and increased flights, it is estimated that auto travel has been reduced by 2.2% per year on average. Given assumptions on the characteristics of drivers switching modes and the types of roads they drove on, the number of automobile fatalities averted since 1978 is estimated to be in the range 200-300 per year.

Automotive History and Development of the Automobile; Automotive Mechanics I: 9043.01.

Science.gov (United States)

Dade County Public Schools, Miami, FL.

The automotive history and development of the automobile course is designed to familiarize the beginning student with basic concepts common to the automobile history and general information that is required for successful advancement in the automotive mechanics field. A course outline is provided and seven pages of post-tests are included in the…

Development of automobile distribution networks on the basis of multi-criteria evaluation of distribution channels

Directory of Open Access Journals (Sweden)

A. Vasilis Vasiliauskas

2010-12-01

Full Text Available .The days when a buyer was forced to choose from what is being offered have passed. These days, buyers demand a product that would answer their exclusive expectations at a time of their preference and at an acceptable price. Therefore, manufacturers aiming to survive the competition battle have to rethink their operation strategies. Special importance is attached to the process of development and reconstruction of supply chains, and the process which may feature particularities, depending on the branch of industry. Automobile manufacturing is the biggest the fastest industry developing across the globe. New automobiles are listed as luxury commodities and are, therefore, subjected to very strict requirements with regard to various logistic operations and technologies, which are vital for ensuring efficient automobile delivery to the final users. Due to the growing demand for brand-new automobiles and the distance to the user, automobile manufacturers are constantly searching for solutions to the development and support of an efficient distribution network. Strategy shaping of distribution network requires evaluation of a number of criteria, which influence the distribution system. The article analyzes the development of automobile distribution networks on the basis of multi-criteria evaluation of distribution channels.

Analysis of CO2, CO and HC emission reduction in automobiles

Science.gov (United States)

Balan, K. N.; Valarmathi, T. N.; Reddy, Mannem Soma Harish; Aravinda Reddy, Gireddy; Sai Srinivas, Jammalamadaka K. M. K.; Vasan

2017-05-01

In the present scenario, the emission from automobiles is becoming a serious problem to the environment. Automobiles, thermal power stations and Industries majorly constitute to the emission of CO2, CO and HC. Though the CO2 available in the atmosphere will be captured by oceans, grasslands; they are not enough to control CO2 present in the atmosphere completely. Also advances in engine and vehicle technology continuously to reduce the emission from engine exhaust are not sufficient to reduce the HC and CO emission. This work concentrates on design, fabrication and analysis to reduce CO2, CO and HC emission from exhaust of automobiles by using molecular sieve 5A of 1.5mm. In this paper, the details of the fabrication, results and discussion about the process are discussed.

Environmental implications of alternative-fueled automobiles: Air quality and greenhouse gas tradeoffs

International Nuclear Information System (INIS)

MaClean, H.L.; Lave, L.B.

2000-01-01

The authors analyze alternative fuel-powerstrain options for internal combustion engine automobiles. Fuel/engine efficiency, energy use, pollutant discharges, and greenhouse gas emissions are estimated for spark and compression ignited, direct injected (DI), and indirect injected (II) engines fueled by conventional and reformulated gasoline, reformulated diesel, compressed natural gas (CNG), and alcohols. Since comparisons of fuels and technologies in dissimilar vehicles are misleading, the authors hold emissions level, range, vehicle size class, and style constant. At present, CNG vehicles have the best exhaust emissions performance while DI diesels have the worst. Compared to a conventional gasoline fueled II automobile, greenhouse gases could be reduced by 40% by a DI CNG automobile and by 25% by a DI diesel. Gasoline- and diesel-fueled automobiles are able to attain long ranges with little weight or fuel economy penalty. CNG vehicles have the highest penalty for increasing range, due to their heavy fuel storage systems, but are the most attractive for a 160-km range. DI engines, particularly diesels, may not be able to meet strict emissions standards, at least not without lowering efficiency

Interior Noise Prediction of the Automobile Based on Hybrid FE-SEA Method

Directory of Open Access Journals (Sweden)

S. M. Chen

2011-01-01

created using hybrid FE-SEA method. The modal density was calculated using analytical method and finite element method; the damping loss factors of the structural and acoustic cavity subsystems were also calculated with analytical method; the coupling loss factors between structure and structure, structure and acoustic cavity were both calculated. Four different kinds of excitations including road excitations, engine mount excitations, sound radiation excitations of the engine, and wind excitations are exerted on the body of automobile when the automobile is running on the road. All the excitations were calculated using virtual prototype technology, computational fluid dynamics (CFD, and experiments realized in the design and development stage. The interior noise of the automobile was predicted and verified at speed of 120 km/h. The predicted and tested overall SPLs of the interior noise were 73.79 and 74.44 dB(A respectively. The comparison results also show that the prediction precision is satisfied, and the effectiveness and reliability of the hybrid FE-SEA model of the automobile is verified.

Topology Explains Why Automobile Sunshades Fold Oddly

Science.gov (United States)

Feist, Curtis; Naimi, Ramin

2009-01-01

Automobile sunshades always fold into an "odd" number of loops. The explanation why involves elementary topology (braid theory and linking number, both explained in detail here with definitions and examples), and an elementary fact from algebra about symmetric group.

Design of Automobile Driveshaft using Carbon/Epoxy and Kevlar/Epoxy Composites

OpenAIRE

R. Srinivasa Moorthy

2013-01-01

Use of advanced composites has resulted in remarkable achievements in many fields including aviation, marine and automobile engineering, medicine, prosthetics and sports, in terms of improved fatigue and corrosion resistances, high specific strength and specific modulus and reduction in energy requirements owing to reduction in weight. The aim of this work is to replace the conventional steel driveshaft of automobiles with an appropriate composite driveshaft. The conventional driveshafts ar...

Promises of the electric-powered car; Promesses de la voiture electrique

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This document analyses the energy needs of an automobile and makes a comparison between the characteristics of a thermal engine car and an electric-powered car with batteries in terms of cost and energy efficiency. The future of the electric-powered car depends mainly on the improvements that will be made in battery technologies in terms of weight, energy density, number of charge-discharge cycles and cost. (J.S.)

Evaluation of malodor for automobile air conditioner evaporator by using laboratory-scale test cooling bench.

Science.gov (United States)

Kim, Kyung Hwan; Kim, Sun Hwa; Jung, Young Rim; Kim, Man Goo

2008-09-12

As one of the measures to improve the environment in an automobile, malodor caused by the automobile air-conditioning system evaporator was evaluated and analyzed using laboratory-scale test cooling bench. The odor was simulated with an evaporator test cooling bench equipped with an airflow controller, air temperature and relative humidity controller. To simulate the same odor characteristics that occur from automobiles, one previously used automobile air conditioner evaporator associated with unpleasant odors was selected. The odor was evaluated by trained panels and collected with aluminum polyester bags. Collected samples were analyzed by thermal desorption into a cryotrap and subsequent gas chromatographic separation, followed by simultaneous olfactometry, flame ionization detector and identified by atomic emission detection and mass spectrometry. Compounds such as alcohols, aldehydes, and organic acids were identified as responsible odor-active compounds. Gas chromatography/flame ionization detection/olfactometry combined sensory method with instrumental analysis was very effective as an odor evaluation method in an automobile air-conditioning system evaporator.

Data-Driven Neural Network Model for Robust Reconstruction of Automobile Casting

Science.gov (United States)

Lin, Jinhua; Wang, Yanjie; Li, Xin; Wang, Lu

2017-09-01

In computer vision system, it is a challenging task to robustly reconstruct complex 3D geometries of automobile castings. However, 3D scanning data is usually interfered by noises, the scanning resolution is low, these effects normally lead to incomplete matching and drift phenomenon. In order to solve these problems, a data-driven local geometric learning model is proposed to achieve robust reconstruction of automobile casting. In order to relieve the interference of sensor noise and to be compatible with incomplete scanning data, a 3D convolution neural network is established to match the local geometric features of automobile casting. The proposed neural network combines the geometric feature representation with the correlation metric function to robustly match the local correspondence. We use the truncated distance field(TDF) around the key point to represent the 3D surface of casting geometry, so that the model can be directly embedded into the 3D space to learn the geometric feature representation; Finally, the training labels is automatically generated for depth learning based on the existing RGB-D reconstruction algorithm, which accesses to the same global key matching descriptor. The experimental results show that the matching accuracy of our network is 92.2% for automobile castings, the closed loop rate is about 74.0% when the matching tolerance threshold τ is 0.2. The matching descriptors performed well and retained 81.6% matching accuracy at 95% closed loop. For the sparse geometric castings with initial matching failure, the 3D matching object can be reconstructed robustly by training the key descriptors. Our method performs 3D reconstruction robustly for complex automobile castings.

Application of Chemometric Techniques to Colorimetric Data in Classifying Automobile Paint

International Nuclear Information System (INIS)

Nur Awatif Rosli; Rozita Osman; Norashikin Saim; Mohd Zuli Jaafar

2015-01-01

The analysis of paint chips is of great interest to forensic investigators, particularly in the examination of hit-and run cases. This study proposes a direct and rapid method in classifying automobile paint samples based on colorimetric data sets; absorption value, reflectance value, luminosity value (L), degree of redness (a) and degree of yellowness (b) obtained from video spectral comparator (VSC) technique. A total of 42 automobile paint samples from 7 manufacturers were analysed. The colorimetric datasets obtained from VSC analysis were subjected to chemometric technique namely cluster analysis (CA) and principal component analysis (PCA). Based on CA, 5 clusters were generated; Cluster 1 consisted of silver color, cluster 2 consisted of white color, cluster 3 consisted of blue and black colors, cluster 4 consisted of red color and cluster 5 consisted of light blue color. PCA resulted in two latent factors explaining 95.58 % of the total variance, enabled to group the 42 automobile paints into five groups. Chemometric application on colorimetric datasets provide meaningful classification of automobile paints based on their tone colour (L, a, b) and light intensity These approaches have the potential to ease the interpretation of complex spectral data involving a large number of comparisons. (author)

A basic study on universal design of auditory signals in automobiles.

Science.gov (United States)

Yamauchi, Katsuya; Choi, Jong-dae; Maiguma, Ryo; Takada, Masayuki; Iwamiya, Shin-ichiro

2004-11-01

In this paper, the impression of various kinds of auditory signals currently used in automobiles and a comprehensive evaluation were measured by a semantic differential method. The desirable acoustic characteristic was examined for each type of auditory signal. Sharp sounds with dominant high-frequency components were not suitable for auditory signals in automobiles. This trend is expedient for the aged whose auditory sensitivity in the high frequency region is lower. When intermittent sounds were used, a longer OFF time was suitable. Generally, "dull (not sharp)" and "calm" sounds were appropriate for auditory signals. Furthermore, the comparison between the frequency spectrum of interior noise in automobiles and that of suitable sounds for various auditory signals indicates that the suitable sounds are not easily masked. The suitable auditory signals for various purposes is a good solution from the viewpoint of universal design.

Hydrogen: implications for the future automobile

International Nuclear Information System (INIS)

Frise, P. R.; Woodward, W.

2004-01-01

'Full text:' The presentation will focus upon the challenges within the automotive manufacturing industry related to the hydrogen fuelled automobile of the future. Challenges and opportunities include issues of power train design and packaging as well as on-road performance capabilities, fuel system packaging and materials for body structures. Due to the size and complexity of the automotive sector, technology changes tend to be evolutionary rather than revolutionary, but changes are being made to today's cars in preparation for the evolution toward the future hydrogen automobile. Real world applications of new technologies will be described that are assisting automakers to prepare for the hydrogen future today. The work will be described in the context of AUTO21, a national Network of Centres of Excellence (NCE), is helping to position Canada as a leader in automotive research and development. More than 250 researchers in 34 Canadian universities and over 110 industry and government partners contribute to AUTO21 through applied research projects in six themes of study ranging from health and societal issues to pure engineering applications. (author)

New perspectives for advanced automobile diesel engines

Science.gov (United States)

Tozzi, L.; Sekar, R.; Kamo, R.; Wood, J. C.

1983-01-01

Computer simulation results are presented for advanced automobile diesel engine performance. Four critical factors for performance enhancement were identified: (1) part load preheating and exhaust gas energy recovery, (2) fast heat release combustion process, (3) reduction in friction, and (4) air handling system efficiency. Four different technology levels were considered in the analysis. Simulation results are compared in terms of brake specific fuel consumption and vehicle fuel economy in km/liter (miles per gallon). Major critical performance sensitivity areas are: (1) combustion process, (2) expander and compressor efficiency, and (3) part load preheating and compound system. When compared to the state of the art direct injection, cooled, automobile diesel engine, the advanced adiabatic compound engine concept showed the unique potential of doubling the fuel economy. Other important performance criteria such as acceleration, emissions, reliability, durability and multifuel capability are comparable to or better than current passenger car diesel engines.

The System Dynamics of U.S. Automobile Fuel Economy

Directory of Open Access Journals (Sweden)

Todd K. BenDor

2012-05-01

Full Text Available This paper analyzes the dynamics of U.S. automobile gasoline consumption since 1975. Using background literature on the history of domestic fuel economy and energy policy, I establish a conceptual model that explains historical trends in adoption of increased fuel economy. I then create a system dynamics simulation model to understand the relationship between increased fuel economy standards and potential changes to gas tax policies. The model suggests that when increases in mandated fuel economy are not conducted in an environment with rising fuel costs, fuel economy improvements may be directly counteracted by shifting tastes of consumers towards larger automobiles with lower fuel economy.

The automobile after tomorrow

Energy Technology Data Exchange (ETDEWEB)

Guzzella, L [Swiss Federal Inst. of Technology (ETH), Zurich (Switzerland)

1996-11-01

This talk discusses the technical options available for automobiles within the next 5 to 10 years. With the objective to reduce consumption and pollution, several alternative approaches are presented and analyzed using simplified but realistic calculations. Main emphasis is laid on CO{sub 2} emission of the complete energy transformation path from the primary energy carrier to the energy dissipated in test cycles. It is shown that no single optimal solution exist but that a trade-off between consumption, pollution and cost must be made for each specific situation. (author) 17 figs., 2 tabs.

40 CFR 600.206-93 - Calculation and use of fuel economy values for gasoline-fueled, diesel-fueled, electric, alcohol...

Science.gov (United States)

2010-07-01

... EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1977 and Later Model Year Automobiles-Procedures... equivalent petroleum-based fuel economy value exists for an electric vehicle configuration, all values for... values for gasoline-fueled, diesel-fueled, electric, alcohol-fueled, natural gas-fueled, alcohol dual...

Research on the Bionics Design of Automobile Styling Based on the Form Gene

Science.gov (United States)

Aili, Zhao; Long, Jiang

2017-09-01

From the heritage of form gene point of view, this thesis has analyzed the gene make-up, cultural inheritance and aesthetic features in the evolution and development of forms of brand automobiles and proposed the bionic design concept and methods in the automobile styling design. And this innovative method must be based on the form gene, and the consistency and combination of form element must be maintained during the design. Taking the design of Maserati as an example, the thesis will show you the design method and philosophy in the aspects of form gene expression and bionic design innovation for the future automobile styling.

Spatial distribution and landuse planning of informal automobile ...

African Journals Online (AJOL)

Spatial distribution and landuse planning of informal automobile workshops in Osogbo, ... data pertaining to the activities and other related issues of their workshops. ... The study therefore, recommends the establishment of mechanic complex, ...

Prelaunch Forecasting of New Automobiles

OpenAIRE

Glen L. Urban; John R. Hauser; John H. Roberts

1990-01-01

This paper develops and applies a prelaunch model and measurement system to the marketing planning of a new automobile. The analysis addresses active search by consumers, dealer visits, word-of-mouth communication, magazine reviews, and production constraints---issues that are important in understanding consumer response to durable goods. We address these issues with a detailed consumer flow model which monitors and projects key consumer transitions in response to marketing actions. A test-vs...

FY2015 Electric Drive Technologies Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None, None

2016-02-29

The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce system cost and improve their efficiency in transforming battery energy to useful work. The R&D is also aimed at better understanding and improving how various components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

FY2014 Electric Drive Technologies Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None

2014-12-01

The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce system cost and improve their efficiency in transforming battery energy to useful work. The R&D is also aimed at better understanding and improving how various components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

FY2016 Electric Drive Technologies Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None, None

2017-07-03

The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce system cost and improve their efficiency in transforming battery energy to useful work. The R&D is also aimed at better understanding and improving how various components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

A new method for controlling refrigerant flow in automobile air conditioning

Energy Technology Data Exchange (ETDEWEB)

Xuquan Li; Jiangping Chen; Zhijiu Chen [Shanghai Jiao Tong University (China). Institute of Refrigeration and Cryogenics Engineering; Weihua Liu; Wei Hu; Xiaobing Liu [Shanghai Delphi Automotive Air Conditiong Systems Co. Ltd., Changhai (China)

2004-05-01

This paper describes the improvement of the refrigerant flow control method by using an electronic expansion valve (EEV) which is driven by a stepper motor in automobile air conditioning system. An EEV can make a quick response to the abrupt change in the refrigerant flow rate during the change in automobile speed and the thermostatic on/off operation. The flow rate characteristic of the EEV for automobile air conditioning was presented. A microcontroller is used to receive the input signal and generate the output signal to control the opening of the EEV. The fuzzy self-tuning proportional-integral-derivative (PID) control method is employed. Experimental results show that the new control method can feed adequate refrigerant flow into the evaporator in various operations. The evaporator discharge air temperature has dropped by approximately 3{sup o}C as compared with that of the conventional PID control system. (author)

Infrastructure and automobile shifts: positioning transit to reduce life-cycle environmental impacts for urban sustainability goals

International Nuclear Information System (INIS)

Chester, Mikhail; Pincetl, Stephanie; Elizabeth, Zoe; Eisenstein, William; Matute, Juan

2013-01-01

Public transportation systems are often part of strategies to reduce urban environmental impacts from passenger transportation, yet comprehensive energy and environmental life-cycle measures, including upfront infrastructure effects and indirect and supply chain processes, are rarely considered. Using the new bus rapid transit and light rail lines in Los Angeles, near-term and long-term life-cycle impact assessments are developed, including consideration of reduced automobile travel. Energy consumption and emissions of greenhouse gases and criteria pollutants are assessed, as well the potential for smog and respiratory impacts. Results show that life-cycle infrastructure, vehicle, and energy production components significantly increase the footprint of each mode (by 48–100% for energy and greenhouse gases, and up to 6200% for environmental impacts), and emerging technologies and renewable electricity standards will significantly reduce impacts. Life-cycle results are identified as either local (in Los Angeles) or remote, and show how the decision to build and operate a transit system in a city produces environmental impacts far outside of geopolitical boundaries. Ensuring shifts of between 20–30% of transit riders from automobiles will result in passenger transportation greenhouse gas reductions for the city, and the larger the shift, the quicker the payback, which should be considered for time-specific environmental goals. (letter)

Infrastructure and automobile shifts: positioning transit to reduce life-cycle environmental impacts for urban sustainability goals

Science.gov (United States)

Chester, Mikhail; Pincetl, Stephanie; Elizabeth, Zoe; Eisenstein, William; Matute, Juan

2013-03-01

Public transportation systems are often part of strategies to reduce urban environmental impacts from passenger transportation, yet comprehensive energy and environmental life-cycle measures, including upfront infrastructure effects and indirect and supply chain processes, are rarely considered. Using the new bus rapid transit and light rail lines in Los Angeles, near-term and long-term life-cycle impact assessments are developed, including consideration of reduced automobile travel. Energy consumption and emissions of greenhouse gases and criteria pollutants are assessed, as well the potential for smog and respiratory impacts. Results show that life-cycle infrastructure, vehicle, and energy production components significantly increase the footprint of each mode (by 48-100% for energy and greenhouse gases, and up to 6200% for environmental impacts), and emerging technologies and renewable electricity standards will significantly reduce impacts. Life-cycle results are identified as either local (in Los Angeles) or remote, and show how the decision to build and operate a transit system in a city produces environmental impacts far outside of geopolitical boundaries. Ensuring shifts of between 20-30% of transit riders from automobiles will result in passenger transportation greenhouse gas reductions for the city, and the larger the shift, the quicker the payback, which should be considered for time-specific environmental goals.

A Tractor or an Automobile? A 1920s Farm Family Faces a Decision.

Science.gov (United States)

Kunze, Joel P.

1991-01-01

Outlines a lesson plan in which students role play a 1920s farm family deciding whether to buy an automobile or a tractor. Other students act as automobile and tractor sales groups. Explains how the lesson illuminates relationships between technological advance and social history. Includes handouts identifying benefits of purchasing cars or…

Possibilities for increasing the use of electric vehicles in Switzerland

International Nuclear Information System (INIS)

Dijamatovic, Y.

1996-01-01

In the towns, it is becoming urgent to define an environment friendly mobility and transport strategy for medium and long distance transportation. Electrical vehicle, whether dependent on an electrical system or battery powered, must be supported as the only solution capable of efficiently fighting against the concentration of chemical and especially noise pollution. By replacing 10% of the Swiss vehicles on the road with electrical vehicles, the electricity consumption in Switzerland would increase by 1.1%. The effects of a massive introduction of electrical vehicles can be beneficial in various sectors of activity. The Swiss confederation has invested money in this sector and the EV promotion is carried out by the electrical utilities, associations, clubs, publications, automobile fairs. These different aspects are discussed in further details. (author)

Legislative Committee Simulation: Regulation in the Automobile Industry.

Science.gov (United States)

Hoffman, Alan J.; And Others

1983-01-01

Examined are ways to overcome obstacles which often prevent creative teaching of legislative decision-making processes to high school students. A simulation dealing with regulation in the automobile industry is used for illustrative purposes. (RM)

Application of solar flat plate collector in automobile industry

Energy Technology Data Exchange (ETDEWEB)

Wawge, P. [Peenya Alloys Pvt. Ltd., Parvati, Pune (India)

2004-07-01

In any industry, heating, cooling and compressed air the costliest part, which affects the production cost of any product. There are three types of indirect heat requirement or the requirement of heat can be divided in the three main categories. (1) low temp. 40 - 60 Deg. (2) Medium temp. 80 - 150 deg. (3) High Temp applications - above 150. Solar Flat Collectors have been proven for the use of solar energy for medium temp. application in hotels, boiler feed water preheating, dairy for pasteurization and some other indirect heating applications. There is another neglected area of application of Solar Flat Plate collector is heat treatment for powder coating plants where heat requirement is bet 50 Deg C - 70 Deg C. In any automobile industry the aesthetic or look of the vehicle place a very important role as far as the sale is concern (after the mechanical performance). The aesthetic means the body and colour of the vehicle. To get a long lasting good quality color, the powder coating procedure plays a major role. Before powder coating there is requirement of different chemical treatment for the removal of rust, grease and other cleaning of the specific sheet metal body parts. The time duration and chemical composition is depends on the selection of body material. A proven method of a chemical treatment is seven / eight tank process. The common system of heating chemicals is by way of electrical heaters, by diesel or other fuel fired boilers. This increases the cost of heat treatment process due the high cost of electricity (for industries rate of electricity is 1.5 to 2 times than the domestic rate) or oils. This can be replaced by Solar water heating system which can efficiently generate the temp of liquid upto 85 Deg C. (orig.)

Designing carbon taxation schemes for automobiles: A simulation exercise for Germany

OpenAIRE

Adamou, Adamos; Clerides, Sofronis; Zachariadis, Theodoros

2011-01-01

Vehicle taxation based on CO2 emissions is increasingly being adopted worldwide in order to shift consumer purchases to low-carbon cars, yet little is known about the effectiveness and overall economic impact of these schemes. We focus on feebate schemes, which impose a fee on high-carbon vehicles and give a rebate to purchasers of low-carbon automobiles. We estimate a discrete choice model of demand for automobiles in Germany and simulate the impact of alternative feebate schemes on emission...

Hierarchical functional model for automobile development; Jidosha kaihatsu no tame no kaisogata kino model

Energy Technology Data Exchange (ETDEWEB)

Sumida, S [U-shin Ltd., Tokyo (Japan); Nagamatsu, M; Maruyama, K [Hokkaido Institute of Technology, Sapporo (Japan); Hiramatsu, S [Mazda Motor Corp., Hiroshima (Japan)

1997-10-01

A new approach on modeling is put forward in order to compose the virtual prototype which is indispensable for fully computer integrated concurrent development of automobile product. A basic concept of the hierarchical functional model is proposed as the concrete form of this new modeling technology. This model is used mainly for explaining and simulating functions and efficiencies of both the parts and the total product of automobile. All engineers who engage themselves in design and development of automobile can collaborate with one another using this model. Some application examples are shown, and usefulness of this model is demonstrated. 5 refs., 5 figs.

High energy X-ray CT system using a linear accelerator for automobile parts inspection

International Nuclear Information System (INIS)

Kanamori, T.; Sukita, T.

1995-01-01

A high energy X-ray CT system (maximum photon energy: 0.95 MeV) has been developed for industrial use. This system employs a linear accelerator as an X-ray source. It is able to image the cross section of automobile parts and can be applied to a solidification analysis study of the cylinder head in an automobile. This paper describes the features of the system and application results which can be related to solidification analysis of the cylinder head when fabricated from an aluminum casting. Some cross-sectional images are also presented as evidence for nondestructive inspection of automobile parts. (orig.)

Automobile industry and globalization in Asian market; Asia ni okeru jidosha sangyo to globalization

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-01-01

Asian countries are now attracting attention of automobile manufacturers of the world for their capabilities of buying, producing, and assembling of automobiles, and producing and supplying of parts, which means that the Asian market is now exposed to globalization. As for the automobile and part manufacturers of Japan, in the presence of economic depression lingering in Asia affecting motorization and rapid changes in the circumstances Japan`s automobile industry finds itself under, are pressed to work out new strategies as a member of the Asian community. A panel discussion of the same name as the subject held in 1997 won favor as a fine initiative to suitably cope with the difficult situation. Useful suggestions and proposals were made concerning the panel discussion, calling the event a new type of round-table talks well responding to the rapid changes in the world economy since 1997, by learned and experienced people, the government offices concerned, staffers of manufacturers in charge of overseas marketing, and international information analysts. They related to the current state and tasks of automobile manufacturing in Asia, trends of regulations and standardization, rolls of technical assistance and the Society of Automotive Engineers of Japan, Ltd., expressed from a wide angle covering various problems relative to environmental protection, safety, etc. (NEDO)

Automobile technology of the future

International Nuclear Information System (INIS)

Seiffert, U.; Walzer, P.

1990-01-01

Looking ahead to the year 2000, this fascinating publication takes an in-depth look at new technology which will impact the passenger car of tomorrow. New developments in the areas of performance, reliability, comfort, fuel economy, safety, and environmental compatibility are examined. In this book the authors offer analysis on subjects such as the impact of legislation, the acceptance of ABS, and features of the future dashboard. Offering insight to readers with both technical and general interest in automobiles

Globalization of the automobile industry in China. Dynamics and barriers in the greening of road transportation

Energy Technology Data Exchange (ETDEWEB)

Gan, Lin

2001-08-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of the automobile in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policy making and transport management. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems and stronger emissions control would be relevant to China's drive toward sustainable transportation development. (author)

Life-cycle Energy and Emissions Inventories for Motorcycles, Diesel Automobiles, School Buses, Electric Buses, Chicago Rail, and New York City Rail

OpenAIRE

Chester, Mikhail; Horvath, Arpad

2009-01-01

The development of life-cycle energy and emissions factors for passenger transportation modes is critical for understanding the total environmental costs of travel. Previous life-cycle studies have focused on the automobile given its dominating share of passenger travel and have included only few life-cycle components, typically related to the vehicle (i.e., manufacturing, maintenance, end-of-life) or fuel (i.e., extraction, refining, transport). Chester (2009) provides the first comprehensiv...

UNICEF and automobile CO2 negotiation

Energy Technology Data Exchange (ETDEWEB)

Woo, Seok Hun [Korea Energy Management Corporation, Yongin (Korea)

2000-06-01

The EU automobile negotiation was very suggestive since it was the first international trade negotiation related with UNFCCC. It generated considerable reactions in association with {sup v}oluntary negotiation{sup i}n semiconductor sector. Most of all, such a new car negotiation shows well that it is hard to free from global environmental responsibilities even for a company in a developing country in UNFCCC.

CHINESE AUTOMOBILE ENTERPRISE STRATEGY ANALYSIS

OpenAIRE

Phd. Candidate Mrs. Chai Feng xia

2015-01-01

China's auto industry also had a golden decade of explosive growth. In 2009, China's auto market has exceeded the United States, the wo rld's largest car market, and in 2013, China's auto production both breaks t hrough twenty million. However, through the presentation of China's auto m arket booming, we should be acutely aware that the status of China's automobile industry in the global automotive industry value chain is still very low, this paper did analysis regarding the current situation...

Concept and ripple effect of negotiation for automobile CO{sub 2} emission regulation

Energy Technology Data Exchange (ETDEWEB)

Han, Hwa Jin [Korea Environment Institute, Seoul (Korea)

2000-06-01

The present average of automobile CO{sub 2} emission in Korea is about 220g/km, so it is hard to achieve reduction goal concluded with EU with present technology capability. In such a situation, it is required a long-term R and D strategy on direct jet engine, hybrid engine, diesel automobile development and other mileage improving technology which need huge initial investment cost. Furthermore, the efforts on alternative fuel automobile technology are needed. When a long-term strategy of corporation and a competitiveness policy of government are integrated properly, then it is possible to establish two goals, environmental protection and maintenance of industrial competitiveness, simultaneously. However, the emission reduction goal that is proposed by EU is still too high to achieve for Korean companies.

Baseline test data for the EVA electric vehicle. [low energy consumption automobiles

Science.gov (United States)

Harhay, W. C.; Bozek, J.

1976-01-01

Two electric vehicles from Electric Vehicle Associates were evaluated for ERDA at the Transportation Research Center of Ohio. The vehicles, loaded to a gross vehicle weight of 3750 pounds, had a range of 56.3 miles at a steady speed of 25 mph and a 27.4 miles range during acceleration-deceleration tests to a top speed of 30 mph. Energy consumption varied from 0.48 kw-hr/mi. to 0.59 kw-hr/mi.

CONVERTER SOLAR RADIATION INTO ELECTRICITY TO SUPPLY THE AUTOMOTIVE SEMICONDUCTOR THERMOELECTRIC AIR CONDITIONING

Directory of Open Access Journals (Sweden)

T. A. Ismailov

2015-01-01

Full Text Available The article considers the possibility to increase the efficiency of converters of solar radiation into electricity by combining constructive photoelectric effect, See-beck thermoeffect and semiconductor solar cells, which will create integrated device to provide power semiconductor thermoelectric automobile air conditioner. 

Kinetic considerations of three-way catalysis in automobile exhaust converters

International Nuclear Information System (INIS)

Botas, J.A.; Gutierrez-Ortiz, M.A.; Gonzalez-Marcos, M.P.; Gonzalez-Marcos, J.A.; Gonzalez-Velasco, J.R.

2001-01-01

The activity of three-way catalysts is highly dependent on the reactants present in the automobile exhaust gases (CO, NO x , HC, O 2 , H 2 O, CO 2 , N 2 ) as well as their relative concentration. Thus, the influence of each reactant on the kinetic behavior of the whole mixture makes difficult to establish the accurate kinetics of the system. Activity experiments carried out close to the real operation conditions (GHSV, concentration, etc.) with a Pt/CeO 2 /Al 2 O 3 catalyst supplied data on the CO and HC oxidation and NO reduction reactions in environments formed by different reactant combinations (from binary mixtures to the whole mixture simulating the real conditions at the automobile converter).The obtained results have shown notable variations in the oxidation/reduction mechanisms depending on the presence (or absence) of components in the environment. The presence of water always promoted the three-way activity of the catalyst. The compensation effect applied to the CO, NO and HC conversions confirmed that kinetic expressions obtained with partial mixtures (not very close to the real converter environment) have only limited application for determining the whole kinetic scheme occurring in the automobile converters

Subjective measures of work-related fatigue in automobile factory employees.

Science.gov (United States)

Guo, Fu; Wang, Tianbo; Ning, Zuojiang

2017-01-01

Work-related fatigue is common among automobile factory employees. The purpose of this study was to assess fatigue of employees at a Chinese automobile factory. 238 employees (119 engineers and 119 workers) participated in this study. The following questionnaires were completed: demographic survey questionnaire, working condition questionnaire (WCQ), functional assessment of chronic illness therapy-fatigue (FACIT-F), subscales of multidimensional fatigue inventory (MFI), and Pittsburgh sleep quality index (PSQI). Both engineers and workers experienced fatigue. The workers (35.6 years old, SD = 6.7) generally felt more fatigue than engineers (42.6 years old, SD = 6.4). The engineers claimed to be more satisfied with the working conditions than workers. The WCQ showed good properties for assessing work-related factors, which were significantly correlated with fatigue (r = 0.568 for engineers and r = 0.639 for workers). For engineers, general fatigue was observed regularly and frequently, and for workers, physical fatigue usually had a long duration. The fatigue was significantly correlated with work-related factors, especially working environment and monotony. For workers, the duration of the work day also affected their fatigue. Some improvements to the working condition in this automobile factory should be considered.

Modern steels for light automobiles (review)

Science.gov (United States)

Tikhonov, A. K.

1994-10-01

The article considers the directions of work at VAZ together with metallurgists of the CIS for creating highly efficient economically-alloyed and microalloyed steels; highly ductile forged steels with improved corrosion resistance coated with zinc and with good stamping, welding, and painting capacity. Steels are created for petrol tanks with aluminum-zinc coatings instead of lead, and new heat and corrosion-resistant steels are developed for automobile exhaust gas systems.

A multi-level perspective on the introduction of hydrogen and battery-electric vehicles

NARCIS (Netherlands)

Bree, van B.; Verbong, G.P.J.; Kramer, G.J.

2010-01-01

Alternative vehicles powered by electricity or hydrogen hold the potential to solve a number of challenges that relate to automobile use, such as climate change, deterioration of local air quality, security of energy supply, and high fuel prices. This article addresses the question as to how a

Daredevils and early birds: Belgian pioneers in automobile racing and aerial sports during the belle époque.

Science.gov (United States)

Ameye, Thomas; Gils, Bieke; Delheye, Pascal

2011-01-01

During the belle époque, Belgium was a trend-setting nation in many domains, including motorised sports. Belgian automobile racers and pilots shattered world records and became international stars. Striking was the shift in sports. Indeed, around 1896, sporting members of the leisure class stepped from the bicycle into the automobile and, around 1908, from the automobile into the airplane. Although these motorised sports were extremely expensive, this article shows that sportsmen and sportswomen from the working class could achieve upward social mobility through their performances. The achievements of these motorised pioneers had a major impact and wide-ranging significance. They laid the foundations for the expansion of the automobile industry and the emergence of civilian and military aviation.

Managing bottlenecks in manual automobile assembly systems using discrete event simulation

Directory of Open Access Journals (Sweden)

Dewa, M.

2013-08-01

Full Text Available Batch model lines are quite handy when the demand for each product is moderate. However, they are characterised by high work-in-progress inventories, lost production time when changing over models, and reduced flexibility when it comes to altering production rates as product demand changes. On the other hand, mixed model lines can offer reduced work-in-progress inventory and increased flexibility. The object of this paper is to illustrate that a manual automobile assembling system can be optimised through managing bottlenecks by ensuring high workstation utilisation, reducing queue lengths before stations and reducing station downtime. A case study from the automobile industry is used for data collection. A model is developed through the use of simulation software. The model is then verified and validated before a detailed bottleneck analysis is conducted. An operational strategy is then proposed for optimal bottleneck management. Although the paper focuses on improving automobile assembly systems in batch mode, the methodology can also be applied in single model manual and automated production lines.

THE ROLE OF AUTOMOBILE TRANSPORT IN HUBS SERVICE

Directory of Open Access Journals (Sweden)

Kirill Iurievich Bely

2015-09-01

Full Text Available Article contains approaches to development and functioning of transport-logistic nodes – hubs – in modern conditions. There is hub classification and examples of them on different transport modes. An important component in providing reliability of hub work is automobile transport.

Performance evaluation of effluent treatment plant for automobile industry

Energy Technology Data Exchange (ETDEWEB)

Ansari, Farid [Department of Applied Science and Humanities, PDM College of Engineering, Bahadurgarh (Haryana) (India); Pandey, Yashwant K. [School of Energy and Environmental Studies, Devi Ahilya Vishwavidyalaya, Indore (India); Kumar, P.; Pandey, Priyanka [Department of Environmental Science, Post Graduate College Ghazipur (IN

2013-07-01

The automobile industry’s wastewater not only contains high levels of suspended and total solids such as oil, grease, dyestuff, chromium, phosphate in washing products, and coloring, at various stages of manufacturing but also, a significant amount of dissolved organics, resulting in high BOD or COD loads. The study reveals the performance, evaluation and operational aspects of effluent treatment plant and its treatability, rather than the contamination status of the real property. The Results revealed that the treated effluent shows most of the parameters are within permissible limits of Central Pollution Control Board (CPCB), India and based on the site visits, discussion with operation peoples, evaluation of process design, treatment system, existing effluent discharge, results of sample analyzed and found that effluent treatment plant of automobile industry are under performance satisfactory.

Measurement of Gamma Radiation in an Automobile Mechanic ...

African Journals Online (AJOL)

Environmental radiation measurement was carried out in an automobile mechanic village, Apo, Abuja, Nigeria. An in-situ measurement approach was adopted using RDS-200 Universal Survey Meter and a handheld Global Positioning System (Garmin GPS 76S) equipment. It was observed that the dose equivalent varied ...

Reduced Haematopoietic Output in Automobile Mechanics and Sprayers with Chronic Exposure to Petrochemicals: A Case-Control Study in Cape Coast, Ghana.

Science.gov (United States)

Adu, Patrick; Pobee, Richard; Awuah, Aaron; Asiamah, Paul B; Amoani, Festus; Gyabaa, Sampson

2018-01-01

Automobile mechanics and sprayers are at a higher risk of exposure to hazardous chemicals such as polycyclic aromatic hydrocarbons and heavy metals which may cause adverse health outcomes. This study aimed to use reticulocyte count as an indirect measure of the haematological output in automobile mechanics and sprayers in the Cape Coast Metropolis, Ghana. This cross-sectional study recruited 130 participants: 90 cases (57 automobile mechanics and 33 automobile sprayers) and 40 controls (nonautomobile workers). Venous blood samples were drawn from the participants and examined for full blood count and absolute reticulocyte count. Semi-structured questionnaire was used to collect demographic and occupational safety information from participants. 75.6% of cases had never received occupational safety training. Whereas 35.1% of automobile mechanics routinely siphoned fuel, 36.4% of automobile sprayers never used nose masks in the discharge of their duties. Controls had significantly higher WBC counts compared to mechanics ( p = 0.0001; 5.04 ± 1.7 versus 3.81 ± 1.1), or sprayers ( p = 0.0004; 5.04 ± 1.7 versus 3.74 ± 0.9). Lymphocyte, monocyte, and platelet counts were also significantly higher in controls compared to cases. Whereas RBC counts were significantly higher in controls compared to automobile mechanics (4.85 versus 4.66; p = 0.034), haemoglobin levels were significantly higher in automobile sprayers compared to controls (15.13 versus 14.1 g/dl; p = 0.0126). Absolute reticulocyte count was significantly higher in controls compared to cases [ p mechanics)]. Among the cases however, only RBC counts were significantly lower in automobile mechanics compared to automobile sprayers ( p = 0.0088; 4.66 ± 0.4 versus 4.85 ± 0.5). It was evident that both automobile mechanics and sprayers had significantly reduced haematopoietic output. Occupational safety training is not given priority and must be addressed.

The automobile of the future: engine technologies and automotive fuels developed by IFP; l'automobile du futur: les technologies moteurs et carburants developpes par l'IFP

Energy Technology Data Exchange (ETDEWEB)

Appert, O; Pinchon, Ph

2004-07-01

In front of the challenges of climate change and depletion of petroleum reserves, in front of the continuous strengthening of pollution regulations applied to automobile (Euro IV and V) and the advances of R and D, several ways of research can be explored to answer the mobility needs of the coming decades. The IFP takes stock of these topics in this press kit which comprises 11 documents: the synthesis of O. Appert and P. Pinchon's talk about 'the cleaner and multi-energies automobile of the future', the slides of this presentation, the future evolutions of automobiles motorizations, the long-term evolutions of engines/fuels (brief for the Panorama 2004 colloquium), diesel fuel in the USA (brief for the Panorama 2004 colloquium), bio-fuels in Europe (brief for the Panorama 2004 colloquium), diesel pollution abatement: efficient results from the IFP's diesel combustion process 'NADI'(TM), the presentation of the IFP scientific meeting of September 22-23, 2004 'which fuels for low CO{sub 2} engines?', the strategic positioning of IFP in the world energy and environmental context, the brochures 'IFP engines and fuels: a competitive advantage' and 'innovating for a sustainable development in the domain of energy'. (J.S.)

Quantifying the association between obesity, automobile travel, and caloric intake.

Science.gov (United States)

Behzad, Banafsheh; King, Douglas M; Jacobson, Sheldon H

2013-02-01

The objective of this study is to assess the association between average adult body mass index (BMI), automobile travel, and caloric intake in the US in order to predict future trends of adult obesity. Annual BMI data (1984-2010) from the Behavioral Risk Factor Surveillance System (BRFSS), vehicle miles traveled data (1970-2009) from the Federal Highway Administration, licensed drivers data (1970-2009) from the Federal Highway Administration, and adult average daily caloric intake data (1970-2009) from the US Department of Agriculture were collected. A statistical model is proposed to capture multicollinearity across the independent variables. The proposed statistical model provides an estimate of changes in the average adult BMI associated with changes in automobile travel and caloric intake. According to this model, reducing daily automobile travel by one mile per driver would be associated with a 0.21 kg/m(2) reduction in the national average BMI after six years. Reducing daily caloric intake by 100 calories per person would be associated with a 0.16 kg/m(2) reduction in the national average BMI after three years. Making small changes in travel or diet choices may lead to comparable obesity interventions, implying that travel-based interventions may be as effective as dietary interventions. Copyright © 2012 Elsevier Inc. All rights reserved.

Applicability of Talent Management with Special Reference to Automobile Industry of Krishnagiri District

OpenAIRE

R. Santoshkumar; Dr. N. Rajasekar

2011-01-01

This research paper examines the applicability of Talent Management in Automobile Industry in Krishnagiri district. The primary data collected from the 100 different levels of employees in automobile industry. Hypothesis test used to measure the applicability of talent management. This paper found the executives feel that Talent Management is the competitive Advantage for the company; they believe that their company’s recruitment policy is leveraged towards recruiting top talent. This study...

[Reduction of automobile traffic: urgent health promotion policy].

Science.gov (United States)

Tapia Granados, J A

1998-03-01

During the last few decades, traffic injuries have become one of the leading causes of death and disability in the world. In urban areas, traffic congestion, noise, and emissions from motor vehicles produce subjective disturbances and detectable pathological effects. More than one billion people are exposed to harmful levels of environmental pollution. Because its combustion engine generates carbon dioxide (CO2), the automobile is one of the chief sources of the gases that are causing the greenhouse effect. The latter has already caused a rise in the average ambient temperature, and over the next decades it will predictable cause significant climatic changes whose consequences, though uncertain, are likely to be harmful and possibly catastrophic. Aside from the greenhouse effect, the relentless growth of parking zones, traffic, and the roadway infrastructure in urban and rural areas is currently one of the leading causes of environmental degradation. Urban development, which is nearly always "planned" around traffic instead of people, leads to a significant deterioration in the quality of life, while it also destroys the social fabric. Unlike the private automobile, public transportation, bicycles, and walking help reduce pollution, congestion, and traffic volume, as well as the morbidity and mortality resulting from injuries and ailments related to pollution. Non-automobile transportation also encourages physical activity--with its positive effect on general health--and helps reduce the greenhouse effect. The drop in traffic volume and the increased use of alternate means of transportation are thus an integrated health promotion policy which should become an inherent part of the movement for the promotion of healthy cities and of transportation policies and economic policy in general.

29 CFR 785.40 - When private automobile is used in travel away from home community.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false When private automobile is used in travel away from home community. 785.40 Section 785.40 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... WORKED Application of Principles Traveltime § 785.40 When private automobile is used in travel away from...

Automobile industry and new bio-fuel oils: International panorama

International Nuclear Information System (INIS)

Hampel, G.

1992-01-01

In assessing the technical/economic feasibility of the direct combustion of vegetable oils in diesel type engines, this paper first points out the good results obtained in performance tests on these fuels in Elsberg engines, and their low sulfur and nitrogen oxides and carbon dioxide emission characteristics. It then assesses the improvements that are necessary in the development of marketable bio-fuel oils that conform to European Communities air pollution standards for automobiles. Further efforts must be made to reduce bio-fuel oil smoke emission levels, to compensate for their lower calorific value as compared with conventional diesel fuels, and to make them compatible with automobile finishing materials - paints and plastics. The paper suggests a set of suitable fiscal policies designed to favour the marketing of bio-diesel fuels based on their favourable pollution abating qualities - low greenhouse gas emissions and biodegradability

Technical Feasibility Evaluation on The Use of A Peltier Thermoelectric Module to Recover Automobile Exhaust Heat

Science.gov (United States)

Sugiartha, N.; Sastra Negara, P.

2018-01-01

A thermoelectric module composes of integrated p-n semiconductors as hot and cold side junctions and uses Seebeck effect between them to function as a thermoelectric generator (TEG) to directly convert heat into electrical power. Exhaust heat from engines as otherwise wasted to the atmosphere is one of the heat sources freely available to drive the TEG. This paper evaluates technical feasibility on the use of a Peltier thermoelectric module for energy recovery application of such kind of waste heat. An experimental apparatus has been setup to simulate real conditions of automobile engine exhaust piping system. It includes a square section aluminium ducting, an aluminium fin heat sink and a TEC1 12706 thermoelectric module. A heater and a cooling fan are employed to simulate hot exhaust gas and ambient air flows, respectively. Electrical loading is controlled by resistors. Dependent variables measured during the test are cold and hot side temperatures, open and loaded circuit output voltages and electrical current. The test results revealed a promising application of the Peltier thermoelectric module for the engine exhaust heat recovery, though the loaded output power produced and loaded output voltage are still far lower than the commercially thermoelectric module originally purposed for the TEG application.

Vertical Keiretsu and International Market Entry: The Case of the Japanese Automobile Ancillary Industry

OpenAIRE

Kunal Banerji; Rakesh B Sambharya

1996-01-01

This study investigated whether small Japanese automobile ancillary firms followed the major Japanese automakers in setting up production facilities in the United States. Based on Dunning's eclectic theory of foreign direct investment and resource dependence theory, hypotheses were generated to explain the determinants of foreign investment of Japanese suppliers. It was hypothesized that mutual dependencies between the major Japanese automobile firms and their suppliers, firm-specific ownersh...

Emissions and prevention/control techniques for automobile body shops in Ciudad Juarez, Mexico

Energy Technology Data Exchange (ETDEWEB)

Jeffery, J.D.; Sager, M.

1999-08-01

Emissions of Volatile Organic Compounds (VOC) from automobile body repair shops are believed to be significant and to contribute to ozone nonattainment in El Paso, Texas and to violations of ozone air quality standards in Ciudad Juarez, Mexico. The Direccion de Desarrollo Urbano Y Ecologia (DDUE), (the local agency in Ciudad Juarez, Mexico) requested CICA's assistance in determining emissions from and identifying appropriate pollution prevention and control techniques for automobile body repair shops in Ciudad Juarez.

FY2011 Advanced Power Electronics and Electric Motors Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

Rogers, Susan A. [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

2012-01-31

The Advanced Power Electronics and Electric Motors (APEEM) program within the DOE Vehicle Technologies Program (VTP) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor (EM), thermal management, and traction drive system technologies that will leapfrog current on-the-road technologies. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

FY2010 Annual Progress Report for Advanced Power Electronics and Electric Motors

Energy Technology Data Exchange (ETDEWEB)

Rogers, Susan A. [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

2011-01-01

The Advanced Power Electronics and Electric Machines (APEEM) subprogram within the Vehicle Technologies Program provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE) and electric motor technologies that will leapfrog current on-the-road technologies. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

Emergency distress call system for automobiles in Lagos state, Nigeria

African Journals Online (AJOL)

Emergency distress call system for automobiles in Lagos state, Nigeria. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... and communications technology capabilities to transportation and the medical care system in order to save lives, ...

Near-term electric vehicle program: Phase I, final report

Energy Technology Data Exchange (ETDEWEB)

Rowlett, B. H.; Murry, R.

1977-08-01

A final report is given for an Energy Research and Development Administration effort aimed at a preliminary design of an energy-efficient electric commuter car. An electric-powered passenger vehicle using a regenerative power system was designed to meet the near-term ERDA electric automobile goals. The program objectives were to (1) study the parameters that affect vehicle performance, range, and cost; (2) design an entirely new electric vehicle that meets performance and economic requirements; and (3) define a program to develop this vehicle design for production in the early 1980's. The design and performance features of the preliminary (baseline) electric-powered passenger vehicle design are described, including the baseline power system, system performance, economic analysis, reliability and safety, alternate designs and options, development plan, and conclusions and recommendations. All aspects of the baseline design were defined in sufficient detail to verify performance expectations and system feasibility.

Design of electric vehicle charging station based on wind and solar complementary power supply

Science.gov (United States)

Wang, Li

2018-05-01

Electric vehicles have become a major trend in the development of the automobile industry. Green energy saving is an important feature of their development. At the same time, the related charging facilities construction is also critical. If we improve the charging measures to adapt to its green energy-saving features, it will be to a greater extent to promote its further development. This article will propose a highly efficient green energy-saving charging station designed for the electric vehicles.

Hybrid modeling and empirical analysis of automobile supply chain network

Science.gov (United States)

Sun, Jun-yan; Tang, Jian-ming; Fu, Wei-ping; Wu, Bing-ying

2017-05-01

Based on the connection mechanism of nodes which automatically select upstream and downstream agents, a simulation model for dynamic evolutionary process of consumer-driven automobile supply chain is established by integrating ABM and discrete modeling in the GIS-based map. Firstly, the rationality is proved by analyzing the consistency of sales and changes in various agent parameters between the simulation model and a real automobile supply chain. Second, through complex network theory, hierarchical structures of the model and relationships of networks at different levels are analyzed to calculate various characteristic parameters such as mean distance, mean clustering coefficients, and degree distributions. By doing so, it verifies that the model is a typical scale-free network and small-world network. Finally, the motion law of this model is analyzed from the perspective of complex self-adaptive systems. The chaotic state of the simulation system is verified, which suggests that this system has typical nonlinear characteristics. This model not only macroscopically illustrates the dynamic evolution of complex networks of automobile supply chain but also microcosmically reflects the business process of each agent. Moreover, the model construction and simulation of the system by means of combining CAS theory and complex networks supplies a novel method for supply chain analysis, as well as theory bases and experience for supply chain analysis of auto companies.

Esophageal rupture caused by explosion of an automobile tire tube: a case report.

Science.gov (United States)

Yu, Yongkang; Ding, Sheng; Zheng, Yifeng; Li, Wei; Yang, Lie; Zheng, Xiushan; Liu, Xiaoyan; Jiang, Jianqing

2013-08-23

There have been no reports in the literature of esophageal rupture in adults resulting from an explosion of an automobile tire. We report the first case of just such an occurrence after an individual bit into a tire, causing it to explode in his mouth. A 47-year-old Han Chinese man presented with massive hemorrhage in his left eye after he accidentally bit an automobile tire tube which burst into his mouth. He was diagnosed with esophageal rupture based on a chest computed tomography scan and barium swallow examination. Drainage of empyema (right chest), removal of thoracic esophagus, exposure of cervical esophagus, cardiac ligation and gastrostomy were performed respectively. After that, esophagogastrostomy was performed. Successful anastomosis was obtained at the neck with no postoperative complications 3 months after the surgery. The patient was discharged with satisfactory outcomes. We present this case report to bring attention to esophageal rupture in adults during the explosion of an automobile tire tube in the mouth.

Assessment of soil-pollution by slag from an automobile battery ...

African Journals Online (AJOL)

Administrator

automobile battery manufacturing plant in Nigeria. Gilbert U. Adie1* and .... Contamination of the environment with heavy metals .... assessment of heavy metal contamination using ..... contact with the soil or through food chain with water,.

Evaluation of purchase intention of customers in two wheeler automobile segment: AHP and TOPSIS

Science.gov (United States)

Sri Yogi, Kottala

2018-03-01

Winning heart of customers is preeminent main design of any business organization in global business environment. This paper explored customer’s priorities while purchasing a two wheeler automobile segment using Analytical Hierarchy Process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) as a multi criteria decision making tools to accomplish the research objectives. Study has been done to analyze different criteria to be considered during purchasing of two wheeler automobiles among respondents using structured questionnaire based on SAATY scale. Based on our previous work on empirical & fuzzy logic approach to product quality and purchase intention of customers in two wheeler- operational, performance, economic, brand value and maintenance aspects are considered as decision criteria of customers while purchasing a two wheeler. The study suggests high pick up during overtaking, petrol saving, reasonable spare parts price, unique in design and identity and easy to change gear as main criterion in purchasing process. We also found some leading two wheeler automobiles models available in Indian market using some objective function criterion in choosing some important characteristics like price, cylinder capacity, brake horse power and weight during purchasing process of two wheeler automobile in Indian market based on respondents perception.

Government Policy and Environmental Innovation in the Automobile Sector in Japan

Energy Technology Data Exchange (ETDEWEB)

Aahman, Max

2004-01-01

The aim of this paper is to analyse the role that the Japanese Government has played, and still plays, in the development of alternatives to conventional vehicles and the effect of government policy. The focus in this paper is on battery-powered electric vehicles (BPEVs), hybrid electric vehicles (HEVs), and fuel cell electric vehicles (FCEVs) These alternatives present an interesting case of technical choices in government policy. The effects of government policy and the process of innovation are analysed from a comprehensive view drawing on the literature regarding technical change and innovation. The whole chain of government support, including the context in which these different policies have been implemented since the early 1970s, is studied. Based on this analysis, current and suggested future government policy is discussed, as the development of alternative vehicles is still an ongoing process. The Japanese Government has adopted a comprehensive strategy and drafted long-term strategic plans including R and D, demonstration and market support. This strategy has enabled the Japanese Government to influence the direction of technical development within the domestic automobile industry with relatively limited government funding. In the development process analysed here, market support have been equally important for the development process as the R and D efforts. The history of BPEVs in Japan illustrates the conventional wisdom that 'picking winners' in government policy is not easy. Our conclusion is that governments should, if possible, focus on technologies that fulfil several policy aims and which can be used in several different applications. This increases the chance of a technology surviving the long journey from idea to competitive product. This study also shows that established dominating companies do not necessarily resist radical changes in their core designs.

Government Policy and Environmental Innovation in the Automobile Sector in Japan

Energy Technology Data Exchange (ETDEWEB)

Aahman, Max

2004-01-01

The aim of this paper is to analyse the role that the Japanese Government has played, and still plays, in the development of alternatives to conventional vehicles and the effect of government policy. The focus in this paper is on battery-powered electric vehicles (BPEVs), hybrid electric vehicles (HEVs), and fuel cell electric vehicles (FCEVs) These alternatives present an interesting case of technical choices in government policy. The effects of government policy and the process of innovation are analysed from a comprehensive view drawing on the literature regarding technical change and innovation. The whole chain of government support, including the context in which these different policies have been implemented since the early 1970s, is studied. Based on this analysis, current and suggested future government policy is discussed, as the development of alternative vehicles is still an ongoing process. The Japanese Government has adopted a comprehensive strategy and drafted long-term strategic plans including R and D, demonstration and market support. This strategy has enabled the Japanese Government to influence the direction of technical development within the domestic automobile industry with relatively limited government funding. In the development process analysed here, market support have been equally important for the development process as the R and D efforts. The history of BPEVs in Japan illustrates the conventional wisdom that 'picking winners' in government policy is not easy. Our conclusion is that governments should, if possible, focus on technologies that fulfil several policy aims and which can be used in several different applications. This increases the chance of a technology surviving the long journey from idea to competitive product. This study also shows that established dominating companies do not necessarily resist radical changes in their core designs.

Aerodynamic resistance reduction of electric and hybrid vehicles

Science.gov (United States)

1979-01-01

The generation of an EHV aerodynamic data base was initiated by conducting full-scale wind tunnel tests on 16 vehicles. Zero-yaw drag coefficients ranged from a high of 0.58 for a boxey delivery van and an open roadster to a low of about 0.34 for a current 4-passenger prototype automobile which was designed with aerodynamics as an integrated parameter. Characteristic effects of aspect ratio or fineness ratio which might appear if electric vehicle shape proportions were to vary significantly from current automobiles were identified. Some preliminary results indicate a 5 to 10% variation in drag over the range of interest. Effective drag coefficient wind-weighting factors over J227a driving cycles in the presence of annual mean wind fields were identified. Such coefficients, when properly weighted, were found to be from 5 to 65% greater than the zero-yaw drag coefficient in the cases presented. A vehicle aerodynamics bibliography of over 160 entries, in six general categories is included.

Smog and Your Automobile. [Teacher's Manual, Filmstrip, Record].

Science.gov (United States)

California State Dept. of Public Health, Berkeley.

A filmstrip, 33 1/3 RPM record, and teacher's manual are combined in this set to be used in driver education classes at the senior high school level. Their main purpose is to inform future drivers how they can minimize pollution from their automobiles through proper car maintenance and good driving habits. Content of the manual is divided into…

Characterization of biological aerosol exposure risks from automobile air conditioning system.

Science.gov (United States)

Li, Jing; Li, Mingzhen; Shen, Fangxia; Zou, Zhuanglei; Yao, Maosheng; Wu, Chang-yu

2013-09-17

Although use of automobile air conditioning (AC) was shown to reduce in-vehicle particle levels, the characterization of its microbial aerosol exposure risks is lacking. Here, both AC and engine filter dust samples were collected from 30 automobiles in four different geographical locations in China. Biological contents (bacteria, fungi, and endotoxin) were studied using culturing, high-throughput gene sequence, and Limulus amebocyte lysate (LAL) methods. In-vehicle viable bioaerosol concentrations were directly monitored using an ultraviolet aerodynamic particle sizer (UVAPS) before and after use of AC for 5, 10, and 15 min. Regardless of locations, the vehicle AC filter dusts were found to be laden with high levels of bacteria (up to 26,150 CFU/mg), fungi (up to 1287 CFU/mg), and endotoxin (up to 5527 EU/mg). More than 400 unique bacterial species, including human opportunistic pathogens, were detected in the filter dusts. In addition, allergenic fungal species were also found abundant. Surprisingly, unexpected fluorescent peaks around 2.5 μm were observed during the first 5 min use of AC, which was attributed to the reaerosolization of those filter-borne microbial agents. The information obtained here can assist in minimizing or preventing the respiratory allergy or infection risk from the use of automobile AC system.

Bioaccumulation of Heavy Metals by Moringa Oleifera in Automobile ...

African Journals Online (AJOL)

Plants accumulate minerals essential for their growth from the environment alongside with heavy metals from contaminated areas.This study investigated bioaccumulation of heavy metals by Moringa oleifera in automobile workshops in three selected local government areas in Ibadan. This was done with a view to ...

OPTIMAL AUTOMOBILE MUFFLER VIBRATION AND NOISE ANALYSIS

Directory of Open Access Journals (Sweden)

Sujit Kumar Jha

2013-06-01

Full Text Available The muffler is the main part of the Automobile Exhaust System, consisting of fibrous and porous materials to absorb noise and vibrations. The exhaust gas mass coming from the engine can produce resonance, which may be the source of fatigue failure in the exhaust pipe due to the presence of continuous resonance. The modes on the muffler should be located away from the engine’s operating frequencies in order to minimise the resonance. The objective of this paper is to determine the frequencies that appear at the modes, which have the more adverse effect during the operation of the automobile. An impact test has been conducted by applying the force using a hard head hammer, and data generated have been used for plotting a graph of the transfer functions using MATLAB. Six points have been selected, namely 1, 2, 3, 4, 7, and 11 on the muffler for the impact test. The collected data from theses six points have been analysed for the addition of damping. Results suggests that increasing the mass increases the damping and lowers the modes of the transfer function. Further research will identify higher strength materials that can withstand the higher gas temperatures as well as the corrosion and erosion by the gas emitted from the engine.

Assessing Cognitive Distraction in the Automobile.

Science.gov (United States)

Strayer, David L; Turrill, Jonna; Cooper, Joel M; Coleman, James R; Medeiros-Ward, Nathan; Biondi, Francesco

2015-12-01

The objective was to establish a systematic framework for measuring and understanding cognitive distraction in the automobile. Driver distraction from secondary in-vehicle activities is increasingly recognized as a significant source of injuries and fatalities on the roadway. Across three studies, participants completed eight in-vehicle tasks commonly performed by the driver of an automobile. Primary, secondary, subjective, and physiological measures were collected and integrated into a cognitive distraction scale. In-vehicle activities, such as listening to the radio or an audio book, were associated with a low level of cognitive workload; the conversation activities of talking to a passenger in the vehicle or conversing with a friend on a handheld or hands-free cell phone were associated with a moderate level of cognitive workload; and using a speech-to-text interfaced e-mail system involved a high level of cognitive workload. The research established that there are significant impairments to driving that stem from the diversion of attention from the task of operating a motor vehicle and that the impairments to driving are directly related to the cognitive workload of these in-vehicle activities. Moreover, the adoption of voice-based systems in the vehicle may have unintended consequences that adversely affect traffic safety. These findings can be used to help inform scientifically based policies on driver distraction, particularly as they relate to cognitive distraction stemming from the diversion of attention to other concurrent activities in the vehicle. © 2015, Human Factors and Ergonomics Society.

The Analysis of Vertical Transaction Behavior and Performance Based on Automobile Brand Trust in Supply Chain

Directory of Open Access Journals (Sweden)

Guanglan Zhou

2016-01-01

Full Text Available The nontrust behaviors among the automobile supply chain members lead to a trust crisis situation. Under such circumstances, this paper studies the mutual influences of trust, enterprise behavior, and transaction performance on the independent brand automobile supply chain. The business behavior concept which consists of information sharing, joint action, and specific asset investment is proposed. Then, the paper tests the reliability and validity of the collected data through Structural Equation Modeling (SEM. Through empirical test and analysis on mutual relationship among vertical transaction enterprise behaviors, trust, and transaction performance, the vertical transaction enterprise behaviors can be regulated, so as to improve the efficiency of independent brand automobile supply chain.

Evaluation of genotoxicity in automobile mechanics occupationally exposed to polycyclic aromatic hydrocarbons using micronuclei and other nuclear abnormalities.

Science.gov (United States)

Khan, Mohammed Rafiq; Sudha, Sellappa

2012-01-01

Occupational and environmental exposures mostly represent mixtures of genotoxic agents, whereas the specificity of biomarker measurements varies widely. Exploration of correlations among biomarkers contributes to the further progress of molecular cancer epidemiology and to the selection of the optimal biomarkers for the investigation of human exposure to carcinogens. The aim of this study was to assess the potential cytogenetic damage associated with occupational exposure to Polycyclic Aromatic Hydrocarbons (PAHs) among automobile mechanics by using Micronuclei (MN) and other Nuclear Abnormalities (NA) as a biomarker. The study population composed of 110 occupationally exposed automobile mechanics and 100 unexposed controls. All the study participants were males. Both the exposed and control individuals were selected from automobile garages located in the urban area of Coimbatore City, South India. Exfoliated buccal cells were collected from 110 automobile mechanics and 100 age and sex matched controls. Further, cells were examined for MN frequency and Nuclear Abnormalities (NA) other than micronuclei, such as binucleates, broken eggs and karyolysis. Results showed a statistically significant difference between occupationally exposed automobile mechanics and control groups. MN and NA frequencies in automobile mechanics were significantly higher than those in control groups (p < 0.05) and also significantly related to smoking habit (p < 0.05). In addition, a higher degree of NA was observed among the exposed subjects with smoking, drinking, tobacco chewing, which is an indicative of cytogenetic damage in these individuals. MN and other NA reflect genetic changes, events associated with carcinogenesis. Therefore, the results of this study indicate that automobile mechanics exposed to PAHs are under risk of significant cytogenetic damage. Therefore, it is important to provide and offer better awareness of occupational hazards among these workers to promote

Design Process Improvement for Electric CAR Harness

Science.gov (United States)

Sawatdee, Thiwarat; Chutima, Parames

2017-06-01

In an automobile parts design company, the customer satisfaction is one of the most important factors for product design. Therefore, the company employs all means to focus its product design process based on the various requirements of customers resulting in high number of design changes. The objective of this research is to improve the design process of the electric car harness that effects the production scheduling by using Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA) as the main tools. FTA is employed for root cause analysis and FMEA is used to ranking a High Risk Priority Number (RPN) which is shows the priority of factors in the electric car harness that have high impact to the design of the electric car harness. After the implementation, the improvements are realized significantly since the number of design change is reduced from 0.26% to 0.08%.

Estimating the changes in the distribution of energy efficiency in the U.S. automobile assembly industry

International Nuclear Information System (INIS)

Boyd, Gale A.

2014-01-01

This paper describes the EPA's voluntary ENERGY STAR program and the results of the automobile manufacturing industry's efforts to advance energy management as measured by the updated ENERGY STAR Energy Performance Indicator (EPI). A stochastic single-factor input frontier estimation using the gamma error distribution is applied to separately estimate the distribution of the electricity and fossil fuel efficiency of assembly plants using data from 2003 to 2005 and then compared to model results from a prior analysis conducted for the 1997–2000 time period. This comparison provides an assessment of how the industry has changed over time. The frontier analysis shows a modest improvement (reduction) in “best practice” for electricity use and a larger one for fossil fuels. This is accompanied by a large reduction in the variance of fossil fuel efficiency distribution. The results provide evidence of a shift in the frontier, in addition to some “catching up” of poor performing plants over time. - Highlights: • A non-public dataset of U.S. auto manufacturing plants is compiled. • A stochastic frontier with a gamma distribution is applied to plant level data. • Electricity and fuel use are modeled separately. • Comparison to prior analysis reveals a shift in the frontier and “catching up”. • Results are used by ENERGY STAR to award energy efficiency plant certifications

Kryptonate-based instrumentation development for automobile exhaust pollutants. Phase III report: design and construction of four (4) experimental models

International Nuclear Information System (INIS)

Goodman, P.; Donaghue, T.

This phase of the program encompasses the design, construction and evaluation of four (4) prototype instruments for the detection of automobile exhaust pollutant. These instruments employ the radio release mechanism utilized by Panametrics in detection of various trace gases. The prototype instruments are of two (2) designs. One design is operable from a power source supplied by an automobile battery. The second design is operable from 110 volts AC power. Successful evaluation in the laboratory as well as with various automobiles were performed with both type instruments. Scale-up of the quantity of sensor material prepared introduced unexpected problems with respect to detection lifetime which were not satisfactorily resolved within the time and funds available to the program. Nevertheless, a Kryptonate-based instrument using a single detection method for the measurement of hydrocarbons, CO and NO/sub x/ as pollutants by automobile exhausts was shown to be operable with actual automobile exhausts, to provide more than adequate sensitivity for inspection purposes, and to provide response and recovery times for full scale reading in the range 10-15 secs. (auth)

Real Time Speed Measure while Automobile Braking on Soft Sensing Technique

Energy Technology Data Exchange (ETDEWEB)

Zhu, W B; Li, D S; Lu, Y [China Jiliang University, Hangzhou, Zhejiang province, 310018 (China)

2006-10-15

Because the braking performance of automobile has close relationship to traffic safety, it is important to detect that. Focusing on the problem that the real time speed is difficult to obtain in detection process, soft sensing technique is introduced in this paper. According to analyzing the relationship of the dynamics equation of a moving automobile, a module of real time speed of braking is set up. By using imitation method with experiment data to get the pressure function of cylinder and analyzing the relationship between the trigging moment of a wheel and the pressure function of brake cylinder, the real time speed is confirmed in good precision. The maximal measurement error of real time speed is 8.7% and the precision can satisfy engineering request.

Real Time Speed Measure while Automobile Braking on Soft Sensing Technique

International Nuclear Information System (INIS)

Zhu, W B; Li, D S; Lu, Y

2006-01-01

Because the braking performance of automobile has close relationship to traffic safety, it is important to detect that. Focusing on the problem that the real time speed is difficult to obtain in detection process, soft sensing technique is introduced in this paper. According to analyzing the relationship of the dynamics equation of a moving automobile, a module of real time speed of braking is set up. By using imitation method with experiment data to get the pressure function of cylinder and analyzing the relationship between the trigging moment of a wheel and the pressure function of brake cylinder, the real time speed is confirmed in good precision. The maximal measurement error of real time speed is 8.7% and the precision can satisfy engineering request

40 CFR 600.501-86 - General applicability.

Science.gov (United States)

2010-07-01

... Year 1978 Passenger Automobiles and for 1979 and Later Model Year Automobiles (Light Trucks and... and diesel automobiles. (b)(1) Manufacturers that produce only electric vehicles are exempt from the... to electric vehicles. (2) Manufacturers with worldwide production (excluding electric vehicle...

SYNTHESIS OF AUTOMOBILE IGNITION SYSTEM USING OZONIZED FUEL

Directory of Open Access Journals (Sweden)

O. M. Pilipenko

2015-01-01

Full Text Available The paper presents a mathematical model for electronic control system of the angular ignition timing (AIT in the (ICE, which is running on ozonized fuel. An algorithm for  ignition system control of internal combustion engine using ozonized fuel has been developed in the paper. A structure of the dynamic ignition system while using a control unit for supplying  ozone into fuel with a purpose to improve automobile ecological and economical indices adapted to operational conditions. Application of the given system allows to ensure minimum reduction of operational petrol consumption and concentration of incomplete combustion products due to optimum ozone dosage into the fuel.  The paper proposes a controlled automobile ignition system as a sequential scheme which has a great number of discrete inputs and outputs and many discrete internal  states. The scheme establishes a functional dependence between input and output states. The paper provides an assessment of ecological indices according to massive emissions of carbon monoxide СО, hydrocarbon СпНт and nitric oxide NOx .  The analysis of  investigations results has been carried out in the paper.

The automobile of the future: engine technologies and automotive fuels developed by IFP; l'automobile du futur: les technologies moteurs et carburants developpes par l'IFP

Energy Technology Data Exchange (ETDEWEB)

Appert, O.; Pinchon, Ph.

2004-07-01

In front of the challenges of climate change and depletion of petroleum reserves, in front of the continuous strengthening of pollution regulations applied to automobile (Euro IV and V) and the advances of R and D, several ways of research can be explored to answer the mobility needs of the coming decades. The IFP takes stock of these topics in this press kit which comprises 11 documents: the synthesis of O. Appert and P. Pinchon's talk about 'the cleaner and multi-energies automobile of the future', the slides of this presentation, the future evolutions of automobiles motorizations, the long-term evolutions of engines/fuels (brief for the Panorama 2004 colloquium), diesel fuel in the USA (brief for the Panorama 2004 colloquium), bio-fuels in Europe (brief for the Panorama 2004 colloquium), diesel pollution abatement: efficient results from the IFP's diesel combustion process 'NADI'(TM), the presentation of the IFP scientific meeting of September 22-23, 2004 'which fuels for low CO{sub 2} engines?', the strategic positioning of IFP in the world energy and environmental context, the brochures 'IFP engines and fuels: a competitive advantage' and 'innovating for a sustainable development in the domain of energy'. (J.S.)

Influence of Product Quality, Brand Image and Price Concerning Automobile Buying Decision of Toyota Avanza at PT. Nasmoco Majapahit Semarang

OpenAIRE

Putra, Arya Willis Nugraha; Waluyo, Handoyo Djoko; Nugraha, Hari Susanta

2015-01-01

This research was based on rapid automotive sector business development, especially automobile. Specifically, this research was discuss about automobile buying of Toyota Avanza brand at PT Nasmoco Majapahit Semarang during 2011 - 2014 keep have sale descending and it's sale target. If that case wasn't improve and solve, probably will presence problem for PT. Nasmoco Majapahit Semarang next.Aim of this research was to found product quality, brand image and price concerning automobile buying de...

29 CFR 500.104 - Department of Labor standards for passenger automobiles and station wagons and transportation of...

Science.gov (United States)

2010-07-01

... holding on an incline. Brake systems shall be free of leaks. (c) Tires. Tires shall have at least 2/32... 29 Labor 3 2010-07-01 2010-07-01 false Department of Labor standards for passenger automobiles and... of Labor standards for passenger automobiles and station wagons and transportation of seventy-five...

Automobile Engine: Basic Ignition Timing. Fordson Bilingual Demonstration Project.

Science.gov (United States)

Vick, James E.

These two vocational instructional modules on basic automobile ignition timing and on engine operation, four-stroke cycle, are two of eight such modules designed to assist recently arrived Arab students, limited in English proficiency (LEP), in critical instructional areas in a comprehensive high school. Goal stated for this module is for the…

Micro-electronics and employment in the Japanese automobile industry.

OpenAIRE

Watanabe, S

1984-01-01

ILO pub-WEP pub. Working paper on the employment effects of microelectronics technological change and industrial robots in the motor vehicle industry in Japan - examines industrial processes, labour productivity, job requirements of automobile workers, effects on the subcontracting system and small scale industry, diffusion patterns and prospects, etc. Bibliography, references and statistical tables.

485 assessment of the problems of manual automobile tyre bead

African Journals Online (AJOL)

eobe

rim bead bond must be broken to carry out repairs on a failed automobile tyre. ... engine will not be transformed into the motion of the vehicle. It provides the only point of contact between ..... Popular Mechanic 162 (6): 62. http://books.google.

Factors behind international relocation and changes in production geography in the European automobile components industry

OpenAIRE

Jesús F. Lampón; Santiago Lago-Peñas

2013-01-01

This article analyses business strategies in the automobile sector to determine the key factors behind production relocation processes in automobile components suppliers. These factors help explain changes in production geography in the sector not only in terms of location advantages but also from a perspective of corporate strategies and decision-making mechanisms within firms. The results obtained from an empirical study in Spain during the period 2001-2008 show how the components sector h...

Chinese automobile industry: opportunities and business; El sector automovilistico Chino: oportunidades y negocios

Energy Technology Data Exchange (ETDEWEB)

Zhang Zhang, Y.

2010-07-01

The emergence of Chinese economy and its rapid recovery from global crisis have sustained a high rate of growth in Chinese automobile market. The article analyzes the industrial evolution of this particular market from the perspective of automobile manufacturers. Two concrete proposals have been suggested to explore these business opportunities exposed in the analyzed industry: investment in China to take advantage of market growth and hence gaining global competitive advantages, and being strategic partner of Chinese enterprises in European and global market. Strategic alternatives for both proposals have been discussed with suggestions and conclusions followed. (Author) 11 refs.

A hydraulic hybrid propulsion method for automobiles with self-adaptive system

International Nuclear Information System (INIS)

Wu, Wei; Hu, Jibin; Yuan, Shihua; Di, Chongfeng

2016-01-01

A hydraulic hybrid vehicle with the self-adaptive system is proposed. The mode-switching between the driving mode and the hydraulic regenerative braking mode is realised by the pressure cross-feedback control. Extensive simulated and tested results are presented. The control parameters are reduced and the energy efficiency can be increased by the self-adaptive system. The mode-switching response is fast. The response time can be adjusted by changing the controlling spool diameter of the hydraulic operated check valve in the self-adaptive system. The closing of the valve becomes faster with a smaller controlling spool diameter. The hydraulic regenerative braking mode can be achieved by changing the hydraulic transformer controlled angle. Compared with the convention electric-hydraulic system, the self-adaptive system for the hydraulic hybrid vehicle mode-switching has a higher reliability and a lower cost. The efficiency of the hydraulic regenerative braking is also increased. - Highlights: • A new hybrid system with a self-adaptive system for automobiles is presented. • The mode-switching is realised by the pressure cross-feedback control. • The energy efficiency can be increased with the self-adaptive system. • The control parameters are reduced with the self-adaptive system.

Additives: The key for automobiles to meet new emission standards

International Nuclear Information System (INIS)

Friedman, J.R.

1992-01-01

Many cities have been perplexed with automobile emissions causing them to become non-attainment areas. These cities usually resort to such tactics as trying to get people to car pool. In principle the concept is excellent, however, the American public is not ready to give up the independence of using their own automobile. Reformulated gasolines are presently being produced and plans for additional plants are being made to meet EPA gasoline requirements. How much reformulated gasoline is available? Where is the present production going? Who else has needs? Does Gasohol have any possibilities still? What contribution can other additives make and are there any bright spots on the horizon and if so what are they? All this will be revealed in this talk and paper at ETE. There will also be a panel discussion for others to present their ideas and contribute to the program

OPTIMAL AUTOMOBILE MUFFLER VIBRATION AND NOISE ANALYSIS

Directory of Open Access Journals (Sweden)

Sujit Kumar Jha

2013-06-01

Full Text Available The muffler is the main part of the Automobile Exhaust System, consisting of fibrous and porous materials to absorb noise and vibrations. The exhaust gas mass coming from the engine can produce resonance, which may be the source of fatigue failure in the exhaust pipe due to the presence of continuous resonance. The modes on the muffler should be located away from the engine’s operating frequencies in order to minimise the resonance. The objective of this paper is to determine the frequencies that appear at the modes, which have the more adverse effect during the operation of the automobile. An impact test has been conducted by applying the force using a hard head hammer, and data generated have been used for plotting a graph of the transfer functions using MATLAB. Six points have been selected, namely 1, 2, 3, 4, 7, and 11 on the muffler for the impact test. The collected data from theses six points have been analysed for the addition of damping. Results suggests that increasing the mass increases the damping and lowers the modes of the transfer function. Further research will identify higher strength materials that can withstand the higher gas temperatures as well as the corrosion and erosion by the gas emitted from the engine. muffler, noise, vibration,modal analysis,

Panorama 2017 - Development of electric vehicle: where are we now?

International Nuclear Information System (INIS)

Ternel, Cyprien

2016-09-01

Electric vehicles - a term which refers to battery electric vehicles (BEV) and plug-in hybrid vehicles (PHEV) - are regarded as one way to lower energy costs and reduce the environmental impact of transport. While mild or full hybrid vehicles are gradually becoming more widespread, the market for electric vehicles is still developing. While the symbolic threshold of one million electric vehicles in circulation worldwide was surpassed in 2015 and sales are increasing from year to year, certain limitations could nevertheless hinder this growth. High purchase prices, the need to establish incentive-based public policies to significantly increase sales, and vehicle range are challenges to overcome before electric vehicles become a sustainable part of the world's automobile fleet. This memorandum takes stock of this specific market and highlights the reasons to believe in its continued progress. It mainly discusses private vehicles (including micro-cars) and utility vehicles, but a specific section is dedicated to mopeds and motorbikes

Multi Bus DC-DC Converter in Electric Hybrid Vehicles

Science.gov (United States)

Krithika, V.; Subramaniam, C.; Sridharan, R.; Geetha, A.

2018-04-01

This paper is cotncerned with the design, simulation and fabrication of the prototype of a Multi bus DC- DC converter operating from 42V DC and delivering 14V DC and 260V DC. As a result, three DC buses are interconnected through a single power electronic circuitry. Such a requirement is energized in the development of a hybrid electric automobile which uses the technology of fuel cell. This is implemented by using a Bidirectional DC-DC converter configuration which is ideally suitable for multiple outputs with mutual electrical isolation. For the sake of reduced size and cost of step-up transformer, selection of a high frequency switching cycle at 10 KHz was done.

The impact of internationalisation and rationalisation of production on the Spanish automobile industry, 1950 - 90

OpenAIRE

A Lagendijk

1995-01-01

The author examines the impact of the internationalisation of automobile production on the local production system in Spain, with emphasis on the relationship between the assembly and supply industries. After an introduction to the issue of linkage formation in the automobile industry, a historical overview of the development of the Spanish production system since the 1950s is presented. This is followed by an analysis of recent changes in the production and procurement strategies of internat...

Electricity market design for the prosumer era

Science.gov (United States)

Parag, Yael; Sovacool, Benjamin K.

2016-04-01

Prosumers are agents that both consume and produce energy. With the growth in small and medium-sized agents using solar photovoltaic panels, smart meters, vehicle-to-grid electric automobiles, home batteries and other ‘smart’ devices, prosuming offers the potential for consumers and vehicle owners to re-evaluate their energy practices. As the number of prosumers increases, the electric utility sector of today is likely to undergo significant changes over the coming decades, offering possibilities for greening of the system, but also bringing many unknowns and risks that need to be identified and managed. To develop strategies for the future, policymakers and planners need knowledge of how prosumers could be integrated effectively and efficiently into competitive electricity markets. Here we identify and discuss three promising potential prosumer markets related to prosumer grid integration, peer-to-peer models and prosumer community groups. We also caution against optimism by laying out a series of caveats and complexities.

Assessment of the Problems of Manual Automobile Tyre Bead ...

African Journals Online (AJOL)

The tyre-rim bead bond must be broken to carry out repairs on a failed automobile tyre. The use of the locally fabricated manual bead breaking equipment as it is being practiced today by commercial tyre repair artisans in Nigeria is characterized by drudgery. This article reports a study of the local manual bead breaking ...

Modernization of the Russian Automobile Road Network on the Base of Innovative Technologies

Directory of Open Access Journals (Sweden)

E. A. Zhukov

2017-01-01

Full Text Available Purpose: the main goal of the article is to build a conceptual model for the organization of effective functioning of the points of economic and innovative growth of the region in modern conditions, taking into account regional and municipal limitations of internal and external nature, with the aim of ensuring economic security, effective interaction of subjects of the "business-power" system Taking into account the influence of institutional factors. Methods: in the present study the following methods were used: systemic approach, methods of social diagnosis, comparative analysis, method of expert evaluations, and method of statistical processing of information. Results: the short characteristic of modern development and technical level of the Russian automobile roads network as the important part of the automobile roads material-technical base is presented. Realization process of the actual task putted by Russian President V.V. Putin to transport builders: two times increasing construction of automobile roads is analyzed. The reality of decision this task due to modernization roads economy material-technical base on the base of innovative technologies and progressive world experience in the field of roads construction is scientifically proved. Conclusions and Relevance: in spite of losing now in decision of the actual task putted by Russian President V.V. Putin to transport builders: two times increasing construction of automobile roads, nevertheless the real possibilities to reach the important aim still remain. It may be done only due to scientifically grounded modernization of the roads economy material-technical base on the base of innovative technologies and progressive world experience in the field of roads construction 

Determinants of EDI (Electronic Data Interchange) Adoption and Integration in the US and Japanese Automobile Suppliers

OpenAIRE

Sam Kurokawa; Seiji Manabe

2002-01-01

This paper examines determinants of EDI adoption and integration in the US and Japanese automobile suppliers. The paper constructs several hypotheses based on the transaction-cost and resource- dependence approaches, and tests these hypotheses by using data from the automobile suppliers. Our study shows: (1) the resource-dependence approach seemed more effective in explaining EDI adoption, while the transaction-cost approach seemed more effective in explaining EDI integration; (2) the transac...

Reduced-Order Computational Model for Low-Frequency Dynamics of Automobiles

Directory of Open Access Journals (Sweden)

A. Arnoux

2013-01-01

Full Text Available A reduced-order model is constructed to predict, for the low-frequency range, the dynamical responses in the stiff parts of an automobile constituted of stiff and flexible parts. The vehicle has then many elastic modes in this range due to the presence of many flexible parts and equipment. A nonusual reduced-order model is introduced. The family of the elastic modes is not used and is replaced by an adapted vector basis of the admissible space of global displacements. Such a construction requires a decomposition of the domain of the structure in subdomains in order to control the spatial wave length of the global displacements. The fast marching method is used to carry out the subdomain decomposition. A probabilistic model of uncertainties is introduced. The parameters controlling the level of uncertainties are estimated solving a statistical inverse problem. The methodology is validated with a large computational model of an automobile.

Role of fin material and nanofluid in performance enhancement of automobile radiator

Science.gov (United States)

Jadar, Raju; Shashishekar, K. S.; Channa Keshava Naik, N.

2018-04-01

An effective cooling system can avoid engine and its components from overheating and helps in achieving optimum engine performance. This work deals with the fabrication and performance evaluation of an automobile radiator with i) Aluminum fins and ii) Al-MWCNT fins using 0.1 w/v% f-MWCNT nanofluid. F-MWCNT nanoparticles in the base fluid improves the rate of heat transfer in an automobile radiator integrated with Al-MWCNT fins. The enhancement of heat transfer mainly depends on the quantity of F-MWCNT nanoparticles added to the host fluid. During the study it was found that at a low weight by volume concentration of nanofluid the heat transfer enhancement of 8% was achieved using Al-MWCNT fins compared to base fluid.

Characteristics of motorcyclists involved in accidents between motorcycles and automobiles.

Science.gov (United States)

Oliveira, Amanda Lima de; Petroianu, Andy; Gonçalves, Dafne Maria Villar; Pereira, Gisele Araújo; Alberti, Luiz Ronaldo

2015-01-01

traffic accidents are one of the main causes of death and disability, with motorcyclists representing the great majority of both the victims and the perpetrators. this work studied the characteristics of motorcyclists injured in accidents involving motorcycles and automobiles. this study sought to interview 100 motorcyclists who had been injured in collisions between motorcycles and automobiles, and who were undergoing emergency hospital treatment in the region of Belo Horizonte, Brazil. The questionnaires included demographic information (age, gender, skin color, education level, profession) and questions about years of licensed driving practice, how often they would drive an automobile, how long they had had a motorcycle driver's license, how often they would ride a motorcycle, the number of prior accidents involving a car, and the number of prior accidents not involving a car. of the 100 consecutive accidents studied, 91 occurred with men and 9 with women, aged between 16 and 79 (m = 29 ± 11) years. Regarding their reason for using a motorcycle, 83% reported using it for transport, 7% for work, and 10% for leisure. Most of these accident victims had secondary or higher education (47%). Of the motorcyclists who held a car driver's license, 68.3% drove the vehicle daily or weekly and held the license for more than one year. Sixty-seven percent of the accident victims used a motorcycle daily and had a motorcycle driver's license for at least one year. among the motorcyclists injured, most were men aged 20 years or older, with complete secondary education, and experienced in driving both motorcycles and cars, indicating that recklessness while driving the motorcycle is the main cause of traffic accidents.

Six changes with the new Regulations on Automobile Loans

Institute of Scientific and Technical Information of China (English)

2004-01-01

<正> On Aug 16, 2004, the People’s Bank of China and China Banking Regulatory Commission (CBRC) jointly issued the new version of the Regulations on Automobile Loans. Due to be put into implementation on Oct 1, the new Regulations change radically compared with the previous version in terms of creditors, possible borrowers, rate of down payments, loan periods, etc.

New Technology and Human Resource Development in the Automobile Industry.

Science.gov (United States)

Organisation for Economic Cooperation and Development, Paris (France). Centre for Educational Research and Innovation.

This document contains five case studies of plants within large enterprises in the automobile industry (Ford, Toyota, Volkswagen, Renault, and Volvo), plus reports of each company's views on human resource development, new technology, and changes in work organization and skill formation. The document is composed of five narrative sections,…

Study of CO2 automobile heating system. Paper no. IGEC-1-129

International Nuclear Information System (INIS)

Zha, S.; Hafner, A.

2005-01-01

Carbon dioxide has become a popular working medium in heat pump water heaters and mobile heat pumping systems due to its environment friendliness and its excellent thermal and transport properties in transcritical cycle. It also looks bright as a complete solution to environmental problem associated with automobile air conditionings. As high efficient mobile engines with less waste heat have been developed, extra heating of the passenger compartment is needed in the cold season. In this investigation, three heating solutions for automobile CO 2 air conditioning systems are provided. They are a bypass CO 2 heating cycle, a conventional CO 2 transcritical heat pump cycle and a high capacity heat pump cycle with economizer. These three solutions are compared with the viewpoints of the efficiency and heating capacity. The test results show that the heating capacity of the bypass heating method is only enough for a small automobile although it has the advantage of simple construction and low investment. The heat pump cycle with economizer applying a special construction reciprocating compressor can obtain a highest capacity even in cold climate. But the investment increase for economizer heat pump cycle includes both the modification of the compressor and the flash tank. And the COPh of economizer heat pump cycle is higher than bypass heating cycle, but lower than conventional heat pump cycle due to the highest capacity operation condition. (author)

The automobile and maps in the integration of the Mexican territory, 1929-1962

Directory of Open Access Journals (Sweden)

Héctor Mendoza Vargas

2015-12-01

Full Text Available This article examines a new social geography opened by the use of the automobile and maps in the Mexican territory between 1929 and 1962. In this temporary scenery, the construction of roads during a considerable span of the 20th Century has been identified as part of the modernization plan of the revolutionary governments of Mexico. This infrastructure furnished the opportunity of getting to know the wide variety of landscapes of the country as never before. A set of new traveling experiences was offered to the middle class at the same time that such diversity of Mexican landscapes caused different emotions through the “pleasure” of ersonally contemplating the rivers, mountains, trees, vegetation, the sea, the hamlets, towns or cities. A central element of this perspective was occupied by the automobile; its presence in Mexico meant a cultural novelty with deep effects and changes in the Mexican society of the 20th Century. The new technological element worked as a new mechanism that started circulating by the roads to observe the landscape. Because of this, we propose the application of three key concepts of space analysis: the circulation territory, the visual territory and the experience territory. Each one of them represents the many sides of the landscape as one study object, and of geography interest, as described below. The territory of circulation came about when the railroads decline started in the twenties and consolidated in the sixties of the past century. That is why in this section we first place a comparative perspective of the motorization levels through the number of inhabitants per automobile in several Latin-American countries having available ordered historical statistics on the matter. Results show a long construction of the automobile culture in this geographic region; construction that incorporated new communication and evolution forms of social groups.

[The epidemiological study of work-related musculoskeletal disorders and related factors among automobile assembly workers].

Science.gov (United States)

Wang, Zhong-Xu; Qin, Ru-Li; Li, Yu-Zhen; Zhang, Xue-Yan; Jia, Ning; Zhang, Qiu-Ling; Li, Gang; Zhao, Jie; Li, Huan-Huan; Jiang, Hai-Qiang

2011-08-01

To investigate the work-related musculoskeletal disorders among automobile assembly workers, to discusses the related risk factors and their relationship. The selected 1508 automobile assembly workers from a north car manufacturing company were regarded as the study object. The hazard zone jobs checklist, Nordic musculoskeletal symptom questionnaire (NMQ) and pain questionnaire were used to perform the epidemiological cross-sectional and retrospective survey and study for the General status, awkward ergonomics factors and related influencing factors, and musculoskeletal disorders of workers. The predominant body sites of occurring WMSDs among automobile assembly workers were mainly low back, wrist, neck and shoulders, the predominant workshop section of occurring WMSDs were mostly concentrated in engine compartment, interior ornament, door cover, chassis and debugging section. The predominant body site of WMSDs among engine compartment and chassis section workers was low back, interior ornament workers were low back and wrist, door cover workers was wrist, chassis workers was low back, debugging workers were neck and low back. Neck musculoskeletal disorders had the trend with the increase of a body height; Smoking may increase the occurrence of musculoskeletal disorders. The WMSDs appears to be a serious ergonomic proble assem among automobile assembly workers, predominant occurring site of WMSDs is with different workshop section, its characteristics is quite obvious, probably related to its existing awkward work position or activities. The worker height and smoking habits may be important factors which affect musculoskeletal disorders happen.

Development of automobile brake lining using pulverized cow hooves

Directory of Open Access Journals (Sweden)

Katsina C. BALA

2016-06-01

Full Text Available Asbestos has been used for so long as automobile brake lining material because of its good physical and chemical properties. However, due to the health hazard associated with its handling, it has lost favour and several alternative materials are being increasingly used. Asbestos-free brake lining was developed in this work using pulverized cow hooves along with epoxy resin, barium sulphate, graphite and aluminium oxide. This was with a view to exploiting the characteristics of cow hooves, which are largely discarded as waste materials to replace asbestos which has been found to be carcinogenic. Samples of brake linings were produced using compressive moulding in which the physical and mechanical properties of the samples were studied. The results obtained showed that proper bonding was achieved as the percentage by weight of epoxy resin increased and percentage by weight of pulverized cow hooves decreased. The hardness, compressive strength, coefficient of friction, water and oil absorption, relative density and wear rate of the brake linings were determined and compared with existing brake lining properties. The result indicates that pulverized cow hooves can be used as brake lining material for automobiles.

EVOLUTIONS IN GLOBAL AUTOMOBILES INDUSTRY

Directory of Open Access Journals (Sweden)

Viorel Pop

2013-09-01

Full Text Available This paper is a brief overview of the evolution of the global automotive industry during the 20th century, with reference to the main manufacturers, oil crises of 1970-1980, and also the global financial and economic crisis that began in 2008. The analyzed period covers the rise of the Asian Continent, beginning with Japan, then South Korea and more recently the emerging countries: China and India. What was predicted 20-25 years ago, became reality: Asia becomes the economic centre of the world, surpassing unexpectedly fast even the Euro-Atlantic area. Regarding Romania, the revival delay of the automobiles industry, led to the loss of the trucks and bus industry, and after a much awaited rehabilitation of car production, this has stuck now at an unsatisfactory level.

Electric mobility in China. A policy review

Energy Technology Data Exchange (ETDEWEB)

Tagscherer, Ulrike

2012-02-15

In 2009, the annual car production in China was 13.8 million cars, a year-on-year increase of more than 48% (Sun 2010: 3). In 2010, automobile production reached 18,264,700 units, an increase of 32.4% compared with 2009. China's share of the global market for car sales amounts to 20%, up from 13% (Sun 2010: 4). China became the biggest car market in the world in 2010 (China Association of Automobile Manufacturers CAAM 2011). Considering the car ownership per capita, there is still a huge development potential for the Chinese car market. And it is exactly this huge development potential which makes analysts believe that China will become the largest market for electric vehicles in the future. This belief is shared by the Chinese government, and the government has implemented or drafted several different policies and rules to support and speed up the development of electric vehicles. At the highest policy-making level, the Chinese government adopted the development of electric vehicles in its highest priority national plan, the 12{sup th} Five-Year Plan (12 FYP 2011-2015). At the same time, the electric vehicle industry has been selected as one of the seven strategic emerging industries by the National Development and Reform Commission (NDRC). This again has also been manifested in the 12 FYP. The overall goals foresee a rapid development of electrification of cars in China and by 2015 the number of electric cars on Chinese streets should reach 1 million. The following analysis will take a deeper look into the different policies that are behind these developments in order to increase the understanding of the opportunities and challenges that lie ahead. Hence, contributing to an evaluation of the current development in this field is one of the major goals of this working paper. As in all other countries, there is no single policy dedicated to electric mobility in China today. Yet there are many different policies from different ministries and agencies with

Individualized solutions to environmental problems: a case of automobile pollution

Energy Technology Data Exchange (ETDEWEB)

Urmetzer, P.; Blake, D. E.; Guppy, N. [British Columbia Univ., Vancouver, BC (Canada)

1999-09-01

Air pollution associated with motor vehicle use is one of the prime indicators of the tension between consumerism and the environment. The use of private automobiles seems so convenient, whereas the alternatives are off-putting enough to make significant changes in personal transportation behaviour well-nigh impossible. At the same time, combating the air pollution associated with extensive use of cars has become one of the major policy objectives for cities around the world. Available policy alternatives can be divided into two categories: (1) incentives, such as improved public transportation, and (2) disincentives, such as environmental tax on gasoline. This paper attempt to directly assess links between these two alternatives, associated attitudes towards them, the level of public support for command and control (i.e. regulatory) policy approaches as well as for economic incentive/disincentive policies. Answers are sought and findings discussed relative to the link between opinions about the environment and support for different types of environmental policies, the usefulness of a rational choice perspective in explaining support for environmental policy alternatives, the role that partisan political attachments play in support of environmental policy approaches, and the roles played by environmental activism, knowledge, and action in shaping support for environmental policy alternatives. Overall results indicate that while most people living in urban environments support the ideas of environmental protection and would be willing to incur costs to confront the problem, exposure to air pollution plays an inconsequential (actually nearly non-existent) role in support of automobile-related environmental problems. Automobile users act like 'free-riders' i.e. they tend to support policies that socialize the cost of solutions rather than policies that attempt to pass the cost of pollution directly on to individual car owners. A sample of the responses to

Characteristics of motorcyclists involved in accidents between motorcycles and automobiles

Directory of Open Access Journals (Sweden)

Amanda Lima de Oliveira

2015-02-01

Full Text Available Introduction: traffic accidents are one of the main causes of death and disability, with motorcyclists representing the great majority of both the victims and the perpetrators. Objective: this work studied the characteristics of motorcyclists injured in accidents involving motorcycles and automobiles. Method: this study sought to interview 100 motorcyclists who had been injured in collisions between motorcycles and automobiles, and who were undergoing emergency hospital treatment in the region of Belo Horizonte, Brazil. The questionnaires included demographic information (age, gender, skin color, education level, profession and questions about years of licensed driving practice, how often they would drive an automobile, how long they had had a motorcycle driver’s license, how often they would ride a motorcycle, the number of prior accidents involving a car, and the number of prior accidents not involving a car. Results: of the 100 consecutive accidents studied, 91 occurred with men and 9 with women, aged between 16 and 79 (m = 29 ± 11 years. Regarding their reason for using a motorcycle, 83% reported using it for transport, 7% for work, and 10% for leisure. Most of these accident victims had secondary or higher education (47%. Of the motorcyclists who held a car driver’s license, 68.3% drove the vehicle daily or weekly and held the license for more than one year. Sixty-seven percent of the accident victims used a motorcycle daily and had a motorcycle driver’s license for at least one year. Conclusion: among the motorcyclists injured, most were men aged 20 years or older, with complete secondary education, and experienced in driving both motorcycles and cars, indicating that recklessness while driving the motorcycle is the main cause of traffic accidents.

Impact of PHEVs Penetration on Ontario’s Electricity Grid and Environmental Considerations

Directory of Open Access Journals (Sweden)

Lena Ahmadi

2012-11-01

Full Text Available Plug-in hybrid electric vehicles (PHEVs have a large potential to reduce greenhouse gases emissions and increase fuel economy and fuel flexibility. PHEVs are propelled by the energy from both gasoline and electric power sources. Penetration of PHEVs into the automobile market affects the electrical grid through an increase in electricity demand. This paper studies effects of the wide spread adoption of PHEVs on peak and base load demands in Ontario, Canada. Long-term forecasting models of peak and base load demands and the number of light-duty vehicles sold were developed. To create proper forecasting models, both linear regression (LR and non-linear regression (NLR techniques were employed, considering different ranges in the demographic, climate and economic variables. The results from the LR and NLR models were compared and the most accurate one was selected. Furthermore, forecasting the effects of PHEVs penetration is done through consideration of various scenarios of penetration levels, such as mild, normal and aggressive ones. Finally, the additional electricity demand on the Ontario electricity grid from charging PHEVs is incorporated for electricity production planning purposes.

76 FR 31467 - Guide Concerning Fuel Economy Advertising for New Automobiles

Science.gov (United States)

2011-06-01

... the Fuel Economy Guide \\1\\ in 1975 to prevent deceptive fuel economy advertising for new automobiles... Economy Guide. That rulemaking will increase the coverage of EPA's new fuel economy labels to include... issue to new vehicle advertisers in the FTC's Fuel Economy Guide. Therefore, the Commission has...

Premium Forecasting of an Insurance Company: Automobile Insurance

OpenAIRE

Fouladvand, M. Ebrahim; Darooneh, Amir H.

2002-01-01

We present an analytical study of an insurance company. We model the company's performance on a statistical basis and evaluate the predicted annual income of the company in terms of insurance parameters namely the premium, total number of the insured, average loss claims etc. We restrict ourselves to a single insurance class the so-called automobile insurance. We show the existence a crossover premium p_c below which the company is loss-making. Above p_c, we also give detailed statistical ana...

Positive impact of electric vehicle and ngv on environment

International Nuclear Information System (INIS)

Shahidul I Khan; Kannan, K.S.; Md Shah Majid

1999-01-01

Electric Vehicle uses electricity from batteries as fuel and is environment friendly with zero emission. The occurrence of haze in 1997 in Malaysia and neighbouring countries has called for new studies about motor vehicle emission as it aggravates the problem. In big cities like Kuala Lumpur, Penang and Johor Bahru where it is estimated that over 300,000 vehicles enter the city everyday, smoke pollution from vehicles is identified as the major contributor to air quality. One of the solutions to air pollution problem could be the use of Electric Vehicles (EV) and Natural Gas for Vehicle (NGV). The NGV uses compressed natural gas mainly methane, is lead free and clean burning with low emission. The electric vehicles use batteries as power source. These batteries are charged off-peak hour, specifically after mid-night when the electric load curve has its least demand period. The number of electric vehicles and NGV in future years is calculated considering the penetration level. The reduction in pollution is estimated considering the number of automobiles replaced by electric vehicles and NGV. Finally, it is concluded that EV and NGV could be the ultimate solution for pollution control and could improve the environment specifically that of congested cities of Malaysia. (Author)

Loyalty marketing in automobile dealerships : case: car dealer X

OpenAIRE

Hyyryläinen, Heidi

2012-01-01

The purpose of this thesis is to study how customer loyalty is taken into account in automobile dealerships, what loyalty marketing means are used to improve customer loyalty, and what potential new loyalty marketing means can be implemented. The thesis is commissioned by Car dealer X. In the theoretical part, areas covered are customership and loyalty marketing. Customership includes customer satisfaction, customer loyalty, customer value and customer retention. Loyalty marketing contain...

Public health, autonomous automobiles, and the rush to market.

Science.gov (United States)

Kelley, Ben

2017-05-01

The USA has the worst motor vehicle safety problem among high-income countries and is pressing forward with the development of autonomous automobiles to address it. Government guidance and regulation, still inadequate, will be critical to the safety of the public. The analysis of this public health problem in the USA reveals the key factors that will determine the benefits and risks of autonomous vehicles around the world.

A study of automobile exhaust noise preferences

Science.gov (United States)

Haire, Jay B.; Carney, Melinda J.; Cheenne, Dominique J.

2005-04-01

A study was conducted to investigate the relationship between preferences in automobile exhaust noise and the demographic factors of a listening jury. Noise samples of four different vehicles were recorded at idle as well as at 3000 RPM, and 1/3 octave sound spectra were acquired simultaneously. The recordings were presented to the jury using headphones and a preference survey was administered. Zwicker loudness was computed for all samples. Demographic factors such as gender, age, current and future vehicle ownership, were correlated to listening preferences, and unforeseen results were found, especially in regards to sport utility vehicles (SUV).

Study on the visibility of an electroluminescent display for automobiles; Jidoshayo EL display no shininsei

Energy Technology Data Exchange (ETDEWEB)

Matsumoto, N; Harada, M; Idogaki, T [Denso Corp., Aichi (Japan)

1997-10-01

This report explores the visibility of an Electroluminescent (EL) display for automotive use. Displays for automobiles are exposed to the direct rays of the sun and forced to operate in wide temperature range. Therefore, luminous flux density by the lighting on EL display panel and operating environment temperature must be considered for the visibility evaluation. Sensory evaluation on the visibility and physical measurements such as contrast, chromaticity difference in accordance with the viewing angle change indicate that the visibility of the EL display for automobiles is advantageous over other displays. 6 refs., 11 figs., 1 tab.

The aluminum-air battery for electric vehicles - An update

Science.gov (United States)

1980-11-01

The development of aluminum-air batteries as mechanically rechargeable power sources to be used in electric vehicles is discussed. The chemistry of the aluminum-air battery, which has a potential for providing the range, acceleration and rapid refueling capability of contemporary automobiles and is based on the reaction of aluminum metal with atmospheric oxygen in the presence of an aqueous sodium hydroxide/sodium aluminate electrolyte, is examined, and it is pointed out that the electric vehicle would be practically emissionless. The battery development program at the Lawrence Livermore National Laboratory, which includes evaluations of electrochemical and chemical phenomena, studies of the economics and energy balance of a transportation system based on aluminum, and power cell design and performance analysis, is presented. It is concluded that although difficult problems must be overcome before the technical and economic feasibility of aluminum-air batteries for electric vehicles can be established, projections indicate that the aluminum-air vehicle is potentially competitive with internal combustion vehicles powered by synthetic liquid fuels.

Automobile exhausts as a source for the environmental pollution by polychloro-dibenzodioxins and -dibenzofurans

International Nuclear Information System (INIS)

Ballschmiter, K.; Bacher, R.; Riehle, U.; Swerev, M.

1990-01-01

This research project was focussed on the analysis of polyhalogenated dibenzodioxins (''dioxins'') and dibenzofurans (''furans'') emitted through automobile exhausts (halogen = chlorine or bromine). High-resolution selective capillary gas chromatography coupled with mass-selective detection was used. The two compound groups show basic differences in pattern and concentrations for traffic-related samples. In the ''dioxin''-series the higher-chlorinated dibenzodioxins (increasing from Cl 4 to Cl 8 ) are preferentially found, in contrast to the ''furane'', present in higher amounts, for which the lower-halogenated dibenzofurans are more important (decreasing from Cl 1 to Cl 6 and from Br 1 to Br 4 ). The distribution of the dioxin- and furan isomers produced corresponds closely to the so-called ''2,6-type'' pattern which is due to a retarded oxidation and/or a stabilization of phenoxy-intermediates containing the 2,6- or 2,4,6-substitution pattern. To what extent a particular dioxin/furan immission is due to automobile-related emissions can, in the light of the present results, be estimated only by taking several factors into account; source remoteness, the predominance of brominated or partly brominated dibenzofurans over the chlorinated congeners, the presence of other, also halogenated, polycyclic aromatics related to the automobile combustion engine. Areas close to traffic are primarily or completely influenced by the ''dioxin''-emissions of automobiles. For the calculation of the toxic equivalents (TE) for traffic-related emissions, the most important of the ''2,3,7,8''-substituted congeners are the furans 2,3,7,8-Cl 4 DF (F 83) and 2,3,4,7,8-Cl 5 DF (F 114) as well as the dioxins 1,2,3,4,6,7,8-Cl 7 DD (D 73) and octachlorodibenzodioxin (D-75). (orig.) [de

Optimization of a parity of brake forces of automobiles in view of a bias of road

International Nuclear Information System (INIS)

Davlatshoev, R.A.; Tursunov, A.A.

2006-01-01

In clause it is shown a method optimization of brake of forces in view of a bias road it is established, that in mountain conditions of loss of coupling weight of automobiles than 2-3 times concerning flat conditions therma are more. The degree of use of coupling weight in result use of a regulator of brake forces very much increases also efficiency of brake systems such a kind of automobiles is provided with definition of optimum factor of coupling at which value of loss of coupling weight is provided minimal

The Swiss automobile industry - Situation, structure, trends, challenges and chances; Automobilindustrie Schweiz. Branchenanalyse 2008

Energy Technology Data Exchange (ETDEWEB)

Schulze, A.

2008-07-01

This paper presented at the Swiss 2008 research conference on traffic takes a look at the situation of the Swiss automobile industry in 2008. The results of the study are presented and include figures on the automobile industry, its history, structure, turn-over, employment and its position from the international point of view. Research and development in the sector, investments and challenges faced are discussed. The products and services offered are looked at and the relevant strategies examined. The sector's competitive environment and possibilities for growth are looked at and the advantages offered by strategic partnerships and geographical location are noted. Finally, interviews with important actors in the business are presented.

Efficient using of automobile transport for the deep open-pit mines

OpenAIRE

Dastan MAHAMBETOV; Bayan RAKISHEV; Galymzhan SAMENOV; Aleksander SŁADKOWSKI

2013-01-01

In the paper the method is proposed of substantiation of the major parameters for zones of effective use of automobile transport of different load-carrying capacity by open cast development of the deep deposits. An efficient ratio is determined between the mining and transport equipment by zone-to -zone use.

40 CFR 600.501-85 - General applicability.

Science.gov (United States)

2010-07-01

... passenger automobiles and light trucks may optionally comply with the electric vehicle requirements in this... Year 1978 Passenger Automobiles and for 1979 and Later Model Year Automobiles (Light Trucks and... produce only electric vehicles are exempt from the requirement of this subpart, except with regard to the...

On the contribution of polycyclic aromatic hydrocarbons to the carcinogenic impact of automobile exhaust condensate evaluated by local application onto mouse skin.

Science.gov (United States)

Grimmer, G; Brune, H; Deutsch-Wenzel, R; Naujack, K W; Misfeld, J; Timm, J

1983-11-01

The objective of this investigation was to identify the substances chiefly responsible for the carcinogenicity of automobile exhaust condensate using topical application onto the skin of mice. This was performed by comparing the carcinogenic effect of various fractions with that of an unseparated sample of automobile exhaust condensate, tested in 3 different doses. The probit and Weibull analysis of the result shows: (a) The condensate, emitted from a gasoline-driven automobile provokes local tumors after long-term application to the dorsal skin of mice. The tumor incidence demonstrates a clear cut dose-response relationship. (b) The fraction of polycyclic aromatic hydrocarbons (PAH) containing more than 3 rings accounts for about 84-91% of the total carcinogenicity of automobile exhaust condensate. This fraction represents only about 3.5% by wt of the condensate. (c) The content of benzo[a]pyrene (BaP) (0.414 mg/g) accounts for 6-7.6% of the total carcinogenicity of automobile exhaust condensate, 15 selected PAHs for about 41%. (d) Regarding the minor effect of the PAH-free fraction (about 83% by wt), no hints for a cocarcinogenic activity were observed.

Dynamic interaction between markets for leasing and selling automobiles

OpenAIRE

Andrikopoulos, Athanasios; Markellos, Raphael N.

2015-01-01

We develop a model of dynamic interactions between price variations in leasing and selling markets for automobiles. Our framework assumes a differential game between multiple Bertrand-type competing firms which offer differentiated products to forward-looking agents. Empirical analysis of our model using monthly US data from 2002 to 2011 shows that variations in selling (cash) market prices lead rapidly dissipating changes of leasing market prices in the opposite direction. We discuss the pra...

Direct strain energy harvesting in automobile tires using piezoelectric PZT-polymer composites

NARCIS (Netherlands)

Ende, D.A. van den; Wiel, H.J. van de; Groen, W.A.; Zwaag, S. van der

2012-01-01

Direct piezoelectric strain energy harvesting can be used to power wireless autonomous sensors in environments where low frequency, high strains are present, such as in automobile tires during operation. However, these high strains place stringent demands on the materials with respect to mechanical

Direct strain energy harvesting in automobile tires using piezoelectric PZT–polymer composites

NARCIS (Netherlands)

Van den Ende, D.A.; Van de Wiel, H.J.; Groen, W.A.; Van der Zwaag, S.

2011-01-01

Direct piezoelectric strain energy harvesting can be used to power wireless autonomous sensors in environments where low frequency, high strains are present, such as in automobile tires during operation. However, these high strains place stringent demands on the materials with respect to mechanical

Oil prices, SUVs, and Iraq. An investigation of automobile manufacturer oil price sensitivity

Energy Technology Data Exchange (ETDEWEB)

Cameron, Ken [United States Navy (United States); Schnusenberg, Oliver [Department of Accounting and Finance, Coggin College of Business, The University of North Florida, 1 UNF Drive, Jacksonville, FL 32224 (United States)

2009-05-15

There has been much speculation about the recent upsurge in crude oil prices and the effect it will have on the economy and business. The objective of this paper is to investigate the relationship between oil prices and stock prices of automobile manufacturers. We add an oil price factor, measured alternatively by the excess change in WTI crude oil prices or the excess return on an energy ETF, to the Fama-French three-factor model over the period March 20, 2001 to September 30, 2008. Our dependent variable is the excess return on a price-weighted index of automobile manufacturers. Results indicate that oil prices add value to the pricing model, particularly for manufacturers specializing in SUVs and for a subperiod following the Iraq invasion on March 19, 2003. (author)

Investigating performance of microchannel evaporators for automobile air conditioning with different port structures

Directory of Open Access Journals (Sweden)

Guoliang Zhou

2017-08-01

Full Text Available Microchannel evaporator has been widely applied in automobile air conditioning, while it faces the problem of refrigerant maldistribution which deteriorates the thermal performance of evaporator. In this study, the performances of microchannel evaporators with different port structures are experimentally investigated for purpose of reducing evaporator pressure drop. Four evaporator samples with different port number and hydraulic diameter are made for this study. The performances of the evaporator samples are tested on a psychometric calorimeter test bench with the refrigerant R-134A at a real automobile air conditioning. The results on the variations of the evaporator pressure drop and evaporator surface temperature distribution are presented and analyzed. By studying the performance of an evaporator, seeking proper port structure is an approach to reduce refrigerant pressure drop as well as improve refrigerant distribution.

Integration of Bass Enhancement and Active Noise Control System in Automobile Cabin

Directory of Open Access Journals (Sweden)

Liang Wang

2008-01-01

Full Text Available With the advancement of digital signal processing technologies, consumers are more concerned with the quality of multimedia entertainment in automobiles. In order to meet this demand, an audio enhancement system is needed to improve bass reproduction and cancel engine noise in the cabins. This paper presents an integrated active noise control system that is based on frequency-sampling filters to track and extract the bass information from the audio signal, and a multifrequency active noise equalizer to tune the low-frequency engine harmonics to enhance the bass reproduction. In the noise cancellation mode, a maximum of 3 dB bass enhancement can be achieved with significant noise suppression, while higher bass enhancement can be achieved in the bass enhance mode. The results show that the proposed system is effective for solving both the bass audio reproduction and the noise control problems in automobile cabins.

Research on industrialization of electric vehicles with its demand forecast using exponential smoothing method

Directory of Open Access Journals (Sweden)

Zhanglin Peng

2015-04-01

Full Text Available Purpose: Electric vehicles industry has gotten a rapid development in the world, especially in the developed countries, but still has a gap among different countries or regions. The advanced industrialization experiences of the EVs in the developed countries will have a great helpful for the development of EVs industrialization in the developing countries. This paper seeks to research the industrialization path & prospect of American EVs by forecasting electric vehicles demand and its proportion to the whole car sales based on the historical 37 EVs monthly sales and Cars monthly sales spanning from Dec. 2010 to Dec. 2013, and find out the key measurements to help Chinese government and automobile enterprises to promote Chinese EVs industrialization. Design/methodology: Compared with Single Exponential Smoothing method and Double Exponential Smoothing method, Triple exponential smoothing method is improved and applied in this study. Findings: The research results show that:  American EVs industry will keep a sustained growth in the next 3 months.  Price of the EVs, price of fossil oil, number of charging station, EVs technology and the government market & taxation polices have a different influence to EVs sales. So EVs manufacturers and policy-makers can adjust or reformulate some technology tactics and market measurements according to the forecast results. China can learn from American EVs polices and measurements to develop Chinese EVs industry. Originality/value: The main contribution of this paper is to use the triple exponential smoothing method to forecast the electric vehicles demand and its proportion to the whole automobile sales, and analyze the industrial development of Chinese electric vehicles by American EVs industry.

Evaluation of Physico-Chemical and Fungal Species Associated with Oil Contaminated Soil from Selected Automobile Garage in Sokoto Metropolis

Directory of Open Access Journals (Sweden)

Hassan Muhammad Maishanu

2018-03-01

Full Text Available This study was conducted with a view to evaluating the physicochemical and mycological properties of different oil contaminated soils collected from three different automobile garages in Sokoto Metropolis, and uncontaminated soil from the temporary site, Usmanu Danfodiyo University, Sokoto (UDUS was used as the control. The pH was determined using pH meter model Hanna (H1991301, quantity of mineral elements was evaluated in accordance with Murphy and Fungi were isolated from the three oil contaminated samples (A, B. and C and the uncontaminated (sample D as control, this was done by standard procedure using the method of P. Ren, T. Jankun & B. Leaderer. The physical, chemical, and mineral elements from the oil-contaminated soils of the three automobile garages and control. The results of particle soil analysis revealed the high content of sandy soil (96.2 to 87.3 and silt is the lowest with (2.5–0.6. Magnesium had the highest concentration of studied minerals, ranging from 193 to 649.2 mg/kg. while PH result revealed that the soil samples were pH value ranged from (16.85–16.20 in oil Contaminated samples, while the control had 15.90, and electrical conductivity ranged from 12.8–13.8 % and 28 % in control, four fungal isolates Aspergillus sp., Penicillum sp., Mucor sp. and Sporobolomyces sp. were identified based on colonial, sexual and morphological characteristics. These fungal strains can be used in bioremediation process and oil pollution reduction in aquatic ecosystems.

A review of composite material applications in the automotive industry for the electric and hybrid vehicle

Science.gov (United States)

Bauer, J. L.

1979-01-01

A review is made of the state-of-the-art in regard to the use of composite materials for reducing the structural mass of automobiles. Reduction of mass provides, in addition to other engineering improvements, increased performance/range advantages that are particularly needed in the electric and hybrid vehicle field. Problems encountered include the attainment of mass production techniques and the prevention of environmental hazards.

The Effect of the Arab Boycott on Israel : The Automobile Market

NARCIS (Netherlands)

Fershtman, C.; Gandal, N.

1996-01-01

Recent progress towards a comprehensive peace in the Middle East has led to a relaxation of the enforcement of the Arab economic boycott of Israel.This in turn has led to the entry of all the major Japanese and Korean automobile manufacturers into the Israeli market.In this paper, we examine the

Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique: An Indian perspective

OpenAIRE

Sunil Luthra; Vinod Kumar; Sanjay Kumar; Abid Haleem

2011-01-01

Purpose: Green Supply Chain Management (GSCM) has received growing attention in the last few years. Most of the automobile industries are setting up their own manufacturing plants in competitive Indian market. Due to public awareness, economic, environmental or legislative reasons, the requirement of GSCM has increased.  In this context, this study aims to develop a structural model of the barriers to implement GSCM in Indian automobile industry.Design/methodology/approach: We have ident...

Automobile diesel exhaust particles induce lipid droplet formation in macrophages in vitro

DEFF Research Database (Denmark)

Cao, Yi; Jantzen, Kim; Gouveia, Ana Cecilia Damiao

2015-01-01

Exposure to diesel exhaust particles (DEP) has been associated with adverse cardiopulmonary health effects, which may be related to dysregulation of lipid metabolism and formation of macrophage foam cells. In this study, THP-1 derived macrophages were exposed to an automobile generated DEP (A...

Information, complexity and efficiency: The automobile model

Energy Technology Data Exchange (ETDEWEB)

Allenby, B. [Lucent Technologies (United States)]|[Lawrence Livermore National Lab., CA (United States)

1996-08-08

The new, rapidly evolving field of industrial ecology - the objective, multidisciplinary study of industrial and economic systems and their linkages with fundamental natural systems - provides strong ground for believing that a more environmentally and economically efficient economy will be more information intensive and complex. Information and intellectual capital will be substituted for the more traditional inputs of materials and energy in producing a desirable, yet sustainable, quality of life. While at this point this remains a strong hypothesis, the evolution of the automobile industry can be used to illustrate how such substitution may, in fact, already be occurring in an environmentally and economically critical sector.

Fuel cells and hydrogen : implications for the future automobile

Energy Technology Data Exchange (ETDEWEB)

Frise, P.R. [Auto 21 Network of Centres of Excellence, Windsor, ON (Canada)

2006-07-01

This presentation outlined the organization of the auto industry, with reference to the tier levels of the supply chain. Automakers or original equipment manufacturers (OEMs) such as Daimler Chrysler, Ford Motor Company, General Motors, Honda, Toyota and Nissan are at the top of the structure, followed by tier 1 suppliers, tier 2 suppliers and tier 3 companies. In recent years, the auto industry has experienced an explosion of new products, building more vehicle types with fewer plants. It was shown that since 1990, auto parts supply companies have consolidated. Currently, Canada's automotive sector is the world's eighth largest producer of motor vehicles. The 6 OEMs operate 12 active assembly plants in Canada plus several engine and drivetrain part plants and support facilities. More than 500,000 Canadians work directly and indirectly in the auto industry, which generates 12 to 13 per cent of Canada's gross domestic product. It was noted that automotive design is driven, in large part, by energy prices. The industry strives to make vehicles safer; improve fuel economy and reduce environmental impacts; and, re-tool the business model by improving supplier relationship and making assembly more efficient and safer in order to control cost and improve profitability. The challenges for the new automobile include new powertrains that use alternate fuels or have electric drive and control systems; new structures and materials; and, new systems and capabilities. The future of fuel cell powertrains was also discussed with reference to prototypes or products already in the market. tabs., figs.

VISUALIZATION OF MEMS STRUCTURES FOR EDUCATION OF AUTOMOBILE MICROSYSTEMS

Directory of Open Access Journals (Sweden)

Slavomír KARDOŠ

2017-09-01

Full Text Available The work is aimed at visualization of working principles of microelectromechanical sensors which are used in automobile electronic systems. Attention is paid to accelerometric, inclinometric, pressure and MAF devices. These are used in systems for stability control, passive and active safety as well as comfort management. The visualizations were realized using modern animation techniques initiated by the creation of virtual materials, 2D and 3D objects, through scene exposure, pending their animation and final cutting.

An Activity-Based Assessment of the Potential Impacts of Plug-In Hybrid Electric Vehicles on Energy and Emissions Using One-Day Travel Data

OpenAIRE

Recker, W. W.; Kang, J. E.

2010-01-01

With the success of Hybrid Electric Vehicles (HEVs) in the automobile market, Plug-In Hybrid Electric Vehicles (PHEVs) are emerging as the next evolution of this attractive alternative. PHEV market penetration is expected to lead to lower gasoline consumption and less emission. The main objective of this research is to assess PHEVs’ energy profile impacts based on simulation of vehicles used in activity and travel patterns drawn from the 2000-2001 California Statewide Household Travel Survey....

Perspectives of Biogas Conversion into Bio-CNG for Automobile Fuel in Bangladesh

Directory of Open Access Journals (Sweden)

M. S. Shah

2017-01-01

Full Text Available The need for liquid and gaseous fuel for transportation application is growing very fast. This high consumption trend causes swift exhaustion of fossil fuel reserve as well as severe environment pollution. Biogas can be converted into various renewable automobile fuels such as bio-CNG, syngas, gasoline, and liquefied biogas. However, bio-CNG, a compressed biogas with high methane content, can be a promising candidate as vehicle fuel in replacement of conventional fuel to resolve this problem. This paper presents an overview of available liquid and gaseous fuel commonly used as transportation fuel in Bangladesh. The paper also illustrates the potential of bio-CNG conversion from biogas in Bangladesh. It is estimated that, in the fiscal year 2012-2013, the country had about 7.6775 billion m3 biogas potential equivalent to 5.088 billion m3 of bio-CNG. Bio-CNG is competitive to the conventional automobile fuels in terms of its properties, economy, and emission.

Development of Proportional Pressure Control Valve for Hydraulic Braking Actuator of Automobile ABS

Directory of Open Access Journals (Sweden)

Che-Pin Chen

2018-04-01

Full Text Available This research developed a novel proportional pressure control valve for an automobile hydraulic braking actuator. It also analyzed and simulated solenoid force of the control valves, and the pressure relief capability test of electromagnetic thrust with the proportional valve body. Considering the high controllability and ease of production, the driver of this proportional valve was designed with a small volume and powerful solenoid force to control braking pressure and flow. Since the proportional valve can have closed-loop control, the proportional valve can replace a conventional solenoid valve in current brake actuators. With the proportional valve controlling braking and pressure relief mode, it can narrow the space of hydraulic braking actuator, and precisely control braking force to achieve safety objectives. Finally, the proposed novel proportional pressure control valve of an automobile hydraulic braking actuator was implemented and verified experimentally.

Addressing Climate Change at the State and Local Level: Using Land Use Controls to Reduce Automobile Emissions

Directory of Open Access Journals (Sweden)

Rachel Medina

2010-06-01

Full Text Available Automobiles are a major source of CO2 emissions. Because there is no immediate technological fix to reduce these emissions, the most promising current strategy is to promote less automobile use. In the United States, this is difficult because federal programs such as the interstate highway system and local land use planning and regulation have encouraged suburban sprawl. In 2006, the state of California passed legislation to roll back greenhouse emissions to 1990 levels by 2020. This legislation did not link the roll back target with land use policies. However, NGOs and the state Attorney General used the state’s pre-existing environmental impact assessment act to sue a large county east of Los Angeles alleging that its revised land use plan was inconsistent with the 2006 legislation. The state and the county settled the suit after the county agreed to new greenhouse gas mitigation duties, and in 2008 California passed additional legislation to implement its 2006 statute. Communities are strongly encouraged to adopt compact, transit-oriented development strategies to limit automobile use. The new legislation gives the attorney general and NGOs additional legal authority to challenge local land use plans and regulatory decisions which fail to adopt these strategies. California’s important experiment has lessons for all urban areas struggling to reduce automobile CO2 emissions. It suggests that local land use controls can be added to the list of workable greenhouse gas mitigation strategies.

FY2013 Advanced Power Electronics and Electric Motors R&D Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

Rogers, Susan A. [Dept. of Energy (DOE), Washington DC (United States). Vehicle Technologies Office

2014-02-01

The Advanced Power Electronics and Electric Motors (APEEM) technology area within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor, and traction drive system (TDS) technologies that will leapfrog current on-the-road technologies, leading to lower cost and better efficiency in transforming battery energy to useful work. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency through research in more efficient TDSs.

Success of Saturn: A Case Study of the Saturn Automobile

Science.gov (United States)

1993-04-01

speed in production with nearly 20,000 cars per month coming off the assembly line.133 MARKETING THE PRODUCT ADVERTISING STRATEGY Saturn’s approach to...Satisfaction Index.𔄁 5 In the Sales Satisfaction category Saturn finished sixth behind Lexus, Cadillac, Infiniti, Lincoln and Mercedes Benz , all...quality, inexpensive, fuel efficient automobiles. They put their cars on the market in the U.S. and Americans bought Japanese instead of expensive

The Research of Scrapped Automobiles Recycling and Disassembling Industry Development Based on Auto Industry Chain

Directory of Open Access Journals (Sweden)

linhua Pang

2015-01-01

Full Text Available The number of China’s scrapped car is on an explosively growing trend, and the development of scrapped car recycling industry has a golden prospect. The current scrapped car recycling system is not perfect in our country, because related industries driven by market develop slowly, and there are some outstanding problems such as potential safety risks, environmental pollution and resource waste. The paper analyzes and studies the existing problems and countermeasures to investigate the development strategy of scrapped car recycling industry according to the whole automobile industry chain construction, technology and equipment conditions, policy guidance, etc. and at last explore the new industrial development pattern of serving automobile reverse design.

In-house Integration Model in the Indian Automobile Industry

OpenAIRE

Tachiki, Dennis S.

2012-01-01

　Since the mid―1980s, Indian automobile companies have been upgrading their technological knowhow to competitively respond to an increasing demand for higher value-added components from domestic and global assemblers. According to the Automotive Component Manufacturers Association of India (ACMA), the auto component market in India should grow at a CARG (compounded annual growth rate) of 11.7 per cent between 2011 and 2015, and the export market at a robust CARG of 18 per cent between 2011 a...

An efficiency analysis of modern and perspective methods and facilities to reduce of the automobile transport exhaust gases

Directory of Open Access Journals (Sweden)

Володимир Петрович Юдін

2015-09-01

Full Text Available The article studies the degree of atmosphere pollution with automobile transport exhaust gases, the evolution of their rating in the European Union, and the reasons why Ukrainian automobile transport exhaust gases lag behind in meeting emission standards. Constructive, organizational, and regulating techniques aimed at reducing the amount of exhaust gases are analyzed; non-standard propositions concerning cooperation of motor vehicle owners and regulatory authorities are offered; the examples of successful practices employed in Zaporizhia region are given

How did the Global Financial Crisis Influence the Automobile Industry: Comparison between the US and Japanese Auto Industry

OpenAIRE

SUN, YAN

2013-01-01

The 2008 global financial crisis was the worst one in seventy-five years and had great negative impact on the economy worldwide. Automobile industry, the pillar to the economic development, was hit most by the recession among the sectors. The purpose of this study is to analyze the financial crisis impacts on the automobile industry and find out strategies to decrease the occurrence rate and the loss if a similar crisis occurs. The study, firstly, describes the impact of financial crisis...

40 CFR 600.501-93 - General applicability.

Science.gov (United States)

2010-07-01

... automobiles and light trucks may optionally comply with the electric vehicle requirements in this subpart. [59... Year 1978 Passenger Automobiles and for 1979 and Later Model Year Automobiles (Light Trucks and... automobiles and light trucks, and to the manufacturers of passenger automobiles and light trucks as determined...

Dynamic modelling of a De Nora fuel cell intended for the electric vehicle

International Nuclear Information System (INIS)

Poirot-Crouvezier, J.-P.; Baurens, P.; Levrard, D.

2000-01-01

Recent progress in fuel cells (proton membrane exchange) has gained interest in the electricity generation in particular for electric vehicles. So far the vehicles demonstrate the feasibility of the technique. After a limited number of demonstrations, the energy source will be indispensable. In general, one cannot speak about a single cell, but a stacking of cells. The system must be able to be supplied with reactants, evacuate products, and produce heat and usable electricity. A fuel cell is inevitably a system of many components that interact with one another. The overall operation of the assembly depends on the associated sub-systems. In the case of the application to automobiles, the driving behaviour must be analysed to ensure the system function can be simulated to obtain the correct characteristics. For instance, an essential study would be the dynamic function of successive accelerations and decelerations

Survey on the reduction technology of greenhouse effect gas emission from automobiles; Jidosha kara no onshitsu koka gas haishutsuryo teigen gijutsu no chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The developmental trend of the reduction technology of greenhouse effect gas emission from automobiles was surveyed. Development of low pollution, energy saving and substituting energy vehicles such as electric, methanol and natural gas vehicles is in rapid progress together with performance improvement of conventional gasoline vehicles. For example, since GDI engine directly injects fuel into cylinders, it can control an air/fuel ratio at will, and reduce CO2 emission. Lean burn engine vehicle and hybrid vehicle are also under development. Performance improvement of storage batteries for electric vehicles, in particular, that combined with solar cells, and the practicability of hybrid vehicles are being clarified. Among them, the superiority of fuel cell technology in the future is becoming clear from a general viewpoint, because of its high efficiency and no CO2 emission. As methanol is produced from plants, construction of cyclic energy systems is promising. However, since low emission vehicles are expensive, some policies such as legal obligation and subsidy system are important. 30 refs., 95 figs., 26 tabs.

Automobiles and global warming: Alternative fuels and other options for carbon dioxide emissions reduction

International Nuclear Information System (INIS)

Sagar, A.D.

1995-01-01

Automobiles are a source of considerable pollution at the global level, including a significant fraction of the total greenhouse gas emissions. Alternative fuels have received some attention as potential options to curtail the carbon dioxide emissions from motor vehicles. This article discusses the feasibility and desirability (from a technical as well as a broader environmental perspective) of the large-scale production and use of alternative fuels as a strategy to mitigate automotive carbon dioxide emissions. Other options such as improving vehicle efficiency and switching to more efficient modes of passenger transportation are also discussed. These latter options offer an effective and immediate way to tackle the greenhouse and other pollutant emission from automobiles, especially as the limitations of currently available alternative fuels and the technological and other constraints for potential future alternatives are revealed

Near-term electric-vehicle program. Phase II. Mid-term review summary report

Energy Technology Data Exchange (ETDEWEB)

1978-07-27

The general objective of the Near-Term Electric Vehicle Program is to confirm that, in fact, the complete spectrum of requirements placed on the automobile (e.g., safety, producibility, utility, etc.) can still be satisfied if electric power train concepts are incorporated in lieu of contemporary power train concepts, and that the resultant set of vehicle characteristics are mutually compatible, technologically achievable, and economically achievable. The focus of the approach to meeting this general objective involves the design, development, and fabrication of complete electric vehicles incorporating, where necessary, extensive technological advancements. A mid-term summary is presented of Phase II which is a continuation of the preliminary design study conducted in Phase I of the program. Information is included on vehicle performance and performance simulation models; battery subsystems; control equipment; power systems; vehicle design and components for suspension, steering, and braking; scale model testing; structural analysis; and vehicle dynamics analysis. (LCL)

Levels of polybrominated diphenyl ethers (PBDEs) in dust from personal automobiles in conjunction with studies on the photochemical degradation of decabromodiphenyl ether (BDE-209).

Science.gov (United States)

Lagalante, Anthony F; Shedden, Courtney S; Greenbacker, Peter W

2011-07-01

The levels of 21 PBDE congeners were detemined in the dust sampled from 66 personal automobiles. The dominant congener in automobile dust was BDE-209 with a median level of 8.12 μg g⁻¹. Personal vehicle dust samples contained the characteristic profile of the PBDE congeners that comprise the PentaBDE and DecaBDE commercial formulations. Levels of PBDEs in personal automobiles are generally reduced in comparison to our previously reported levels in resale vehicles on dealership lots presumably due to a dilution effect introduced by dust or debris that does not originate from the vehicle. Laboratory photochemical studies were conducted on both automobile dust collected from personal vehicles as well as BDE-209 adsorbed to sodium sulfate. No significant degradation occurred in the personal vehicle dust after 56 days of constant UVA irradiation while significant degradation did occur with BDE-209 adsorbed to sodium sulfate. PBDEs from the degradation of BDE-209 were identified and potential degradation pathways elucidated. Human exposure potential to PBDEs from automobile dust ingestion remains a serious concern in the U.S. population. Copyright © 2011 Elsevier Ltd. All rights reserved.

Can Next-Generation Vehicles Sustainably Survive in the Automobile Market? Evidence from Ex-Ante Market Simulation and Segmentation

Directory of Open Access Journals (Sweden)

Jungwoo Shin

2018-02-01

Full Text Available Introduced autonomous and connected vehicles equipped with emerging technologies are expected to change the automotive market. In this study, using stated preference (SP data collected from choice experiments conducted in Korea with a mixed multiple discrete-continuous extreme value model (MDCEV, we analyzed how the advent of next-generation of vehicles with advanced vehicle technologies would affect consumer vehicle choices and usage patterns. Additionally, ex-ante market simulations and market segmentation analyses were conducted to provide specific management strategies for next-generation vehicles. The results showed that consumer preference structures of conventional and alternative fuel types primarily differed depending on whether they were drivers or non-drivers. Additionally, although the introduction of electric vehicles to the automobile market is expected to negatively affect the choice probability and mileage of other vehicles, it could have a positive influence on the probability of purchasing an existing conventional vehicle if advanced vehicle technologies are available.

Application of the Open Cycle Stirling Engine Driven with Liquid Nitrogen for the Non-Polluting Automobiles

Directory of Open Access Journals (Sweden)

M.B. Kravchenko

2017-10-01

Full Text Available Progress on advancing technology of using liquid nitrogen for the non-polluting automobiles is reported. It is shown that the low exergy efficiency of the known engines fueled with liquid nitrogen has discredited the very idea of a cryomobile. The design of the open-cycle cryogenic Stirling engine is proposed. This engine allows extracting up to 57% of the exergy accumulated in liquid nitrogen. The method used to calculate of such open-cycle Stirling engine is described and the calculation results and discussion are presented. It is shown that 200 liters of liquid nitrogen is sufficient for 180 km range of cryomobile at speed of 55 km/h, while a full charge of the 300-kilogram battery of Nissan LEAF electric vehicle is sufficient for a range of 160 km. Use of liquid nitrogen or liquid air as an energy vector in a transport will not require scarce materials, and, in comparison with using of lithium-ion batteries or hydrogen, this will require less capital investment.

Estimation of exposed radiation dose in radiography of the chest. Mainly on the dose at health examination on automobiles

International Nuclear Information System (INIS)

Suzuki, Shoichi; Oda, Akiko; Ohkura, Masaki

1998-01-01

The exposure doses in radiography and photofluorography of the chest at health examination on automobiles were estimated and compared with those using other hospital equipments. The tube voltage, effective energy and half value layer under ordinary conditions for radiography and fluorography were measured by KYOKKO model 100 X-ray analyzer and output pulse shape was confirmed by the fluorometer (TOREKEY-1001 C). The dose at the body surface was measured by the ionization chambers (VICTOREEN RADCON 500 and 30-330) which had been equipped in the WAC chest phantom (JIS Z 4915, Kyoto Kagaku). Nine automobiles of 3 facilities were used, of which X-ray generating apparatuses of either condenser or inverter type were manufactured by Hitachi (5 machines), Toshiba (1) and Shimadzu (3). The examined apparatuses not for the automobile were Toshiba-20 and Hitachi SIRIUS-100 portable ones and Hitachi DH-1520 TM high-voltage one. The effective energy was found dependent on the tube voltage (100-130 kV) and X-ray generating system (35.1-54.37 keV in the condenser type and 41.1-43.9 keV in the inverter type). Pulse shape analysis revealed that the pulse height and area under the pulse height-time curve were larger in the inverter system. The mean doses in photofluorography and radiography on automobiles were 0.525 and 0.297 mGy, respectively. The mean dose of 0.61 mGy in radiography at home with the portable apparatus was the highest even when compared with that of 0.525 mGy for fluorography on the automobile. Thus, the inverter system on the car can guarantee the level of 0.4 mGy defined by IAEA guideline (Safety series No. 115, 1996). (K.H.)

Situational analysis for the current status of the electric vehicle industry : a report for presentation to the Electric Vehicle Industry Steering Committee of Natural Resources Canada

International Nuclear Information System (INIS)

Fleet, B.; Li, J.K.; Gilbert, R.

2008-01-01

This paper outlined the status of the electric vehicle industry in Canada. While the low energy density of electric batteries has prevented the widespread adoption of electric-powered vehicles, new developments in nickel metal hydride (Ni-MH) batteries have provided a 3- to 4-fold increase in energy density than lead-acid batteries. The Ni-MH batteries have enabled the emergence of hybrid automobiles that use electric motors to supplement or provide traction with internal combustion engine (ICE) generators that power the motors or charge batteries. Plug-in hybrids use batteries that can be charged from the electricity grid or by on-board generators. Lithium-based batteries contain twice the amount of energy density as Ni-MH batteries, and are now being upscaled for use in plug-in hybrids. Canada has many assets that favour the development of electric vehicle technology as it has a high degree of urbanization, and a widely diversified electric supply. Canada is also a major player in EV technology, and a world leader in renewable electricity generation. However, considerable investment and leadership is needed in order to foster EV technology in Canada. It was concluded that an EV industry can be developed by facilitating collaboration among organizations currently promoting sustainable transportation, identifying potential centres of engineering and technological excellence, and defining markets relevant to a Canadian EV industry. 32 refs., 6 tabs., 4 figs

Life cycle models of conventional and alternative-fueled automobiles

Science.gov (United States)

Maclean, Heather Louise

This thesis reports life cycle inventories of internal combustion engine automobiles with feasible near term fuel/engine combinations. These combinations include unleaded gasoline, California Phase 2 Reformulated Gasoline, alcohol and gasoline blends (85 percent methanol or ethanol combined with 15 percent gasoline), and compressed natural gas in spark ignition direct and indirect injection engines. Additionally, I consider neat methanol and neat ethanol in spark ignition direct injection engines and diesel fuel in compression ignition direct and indirect injection engines. I investigate the potential of the above options to have a lower environmental impact than conventional gasoline-fueled automobiles, while still retaining comparable pricing and consumer benefits. More broadly, the objective is to assess whether the use of any of the alternative systems will help to lead to the goal of a more sustainable personal transportation system. The principal tool is the Economic Input-Output Life Cycle Analysis model which includes inventories of economic data, environmental discharges, and resource use. I develop a life cycle assessment framework to assemble the array of data generated by the model into three aggregate assessment parameters; economics, externalities, and vehicle attributes. The first step is to develop a set of 'comparable cars' with the alternative fuel/engine combinations, based on characteristics of a conventional 1998 gasoline-fueled Ford Taurus sedan, the baseline vehicle for the analyses. I calculate the assessment parameters assuming that these comparable cars can attain the potential thermal efficiencies estimated by experts for each fuel/engine combination. To a first approximation, there are no significant differences in the assessment parameters for the vehicle manufacture, service, fixed costs, and the end-of-life for any of the options. However, there are differences in the vehicle operation life cycle components and the state of technology

Biomonitoring of N-ethyl-2-pyrrolidone in automobile varnishers.

Science.gov (United States)

Koslitz, Stephan; Meier, Swetlana; Schindler, Birgit Karin; Weiss, Tobias; Koch, Holger Martin; Brüning, Thomas; Käfferlein, Heiko Udo

2014-12-01

N-alkyl-2-pyrrolidones are important organic solvents for varnishes in industry. This study investigates exposure to N-ethyl-2-pyrrolidone (NEP) in varnishing of hard plastic components in an automobile plant. Two specific biomarkers of exposure, 5-hydroxy-N-ethyl-2-pyrrolidone (5-HNEP) and 2-hydroxy-N-ethylsuccinimide (2-HESI), were analyzed in urine samples of 14 workers. For this purpose, pre-shift, post-shift and next day pre-shift urine samples were collected midweek. Twelve workers performed regular work tasks (loading, wiping and packing), whereas two workers performed special work tasks including cleaning the sprayer system with organic solvents containing N-alkyl-2-pyrrolidones. Spot urine samples of nine non-exposed persons of the same plant served as controls. Median post-shift urinary levels of workers with regular work tasks (5-HNEP: 0.15 mg/L; 2-HESI: 0.19 mg/L) were ∼5-fold higher compared to the controls (0.03 mg/L each). Continuously increasing metabolite levels, from pre-shift via post-shift to pre-shift samples of the following day, were observed in particular for the two workers with the special working tasks. Maximum levels were 31.01 mg/L (5-HNEP) and 8.45 mg/L (2-HESI). No clear trend was evident for workers with regular working tasks. In summary, we were able to show that workers can be exposed to NEP during varnishing tasks in the automobile industry. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Dissolution kinetics of Pd and Pt from automobile catalysts by naturally occurring complexing agents

Czech Academy of Sciences Publication Activity Database

Šebek, O.; Mihaljevič, M.; Strnad, L.; Ettler, V.; Ježek, J.; Štědrý, R.; Drahota, P.; Ackerman, Lukáš; Adamec, V.

2011-01-01

Roč. 198, December (2011), s. 331-339 ISSN 0304-3894 Institutional research plan: CEZ:AV0Z30130516 Keywords : automobile catalyst * Platinum group elements * mobilisation * leaching * kinetic Subject RIV: DD - Geochemistry Impact factor: 4.173, year: 2011

Ratio analysis and Piotroski scoring system in the automobile industry in Croatia

Directory of Open Access Journals (Sweden)

Morana Mesarić

2014-10-01

Full Text Available To gain insight into operational efficiency, sustainable profitability, the ability to fulfil commitments, use of funds borrowed or investment risk or operational self-sufficiency, it is necessary to conduct analyses of financial statements usually known as ratio analysis. The paper provides analyses of five Croatian general distributors of the automobile industry. Ratios used in the analyses are those used in the Piotroski f-scoring analyses, which are famous for assessing financial capacities of enterprises on the stock exchange market. Based on ratios used in Piotroski scoring systems the assessment of five enterprises, as well as the sector as a whole was carried out. The analysis covers the period 2007-2012. That is the period of the rise, falling and recovery of the automotive industry throughout the world as well as the rise, falling and recession of the whole economy including the automobile market. In general, the sector itself is financially unstable and consequently risk exposed. Results are used for preliminary analyses and prediction of the future financial strength of the auto industry in Croatia.

Creating a One-Stop-Shop for Automobile Solutions in Kolkata, India.

OpenAIRE

Kanoria, Shrivardhan

2009-01-01

This is a research lead business plan concerning making a one-stop-shop for automobile solutions in Kolkata, India, containing three elements of business. Firstly, it would involve restoration, buying and selling of vintage and classic cars. Secondly, it would contain modern car customisation. Thirdly, it would contain modern car servicing, buying and selling. These would be the core activities, having associates non core businesses as well.

The impact on electricity demand and emissions due to the introduction of electric cars in the São Paulo Power System

International Nuclear Information System (INIS)

Dias, Marcos Vinícius Xavier; Haddad, Jamil; Horta Nogueira, Luiz; Costa Bortoni, Edson da; Passos da Cruz, Ricardo Alexandre; Akira Yamachita, Roberto; Goncalves, Jose Luiz

2014-01-01

Over the past years, the pursuit of using less polluting energy sources throughout society has been on the increase. In general, the transportation sector is responsible for most of the emissions of greenhouse gases. Therefore, in this article a methodological approach is applied in such a way that it is possible to quantify the impact of the penetration of electric vehicles vis-à-vis others that use different types of fuel (flexible fuel, for example). The study is conducted for a road modal in São Paulo, the main state in Brazil in terms of economy, energy and environment, taking into account only automobiles. A comparative analysis of forecasting scenarios until 2035 for various inputs of electric cars in the whole state fleet is presented, aiming to verify the susceptibility of the model suggested, upon the introduction of electric vehicles, taking into account also the electrical and environmental impacts related to it. The analysis was possible due to the use of a simulation tool, Long range Energy Alternatives Planning System (LEAP), which is an energy environmental model based on scenarios, allowing an integrated and reliable support to develop studies on integrated energy planning. - Highlights: • Overview of the transportation sector • Forecasting methodology • Additional energy demand results

Teamwork in the Automobile Industry Ð An Anglo-German Comparison

OpenAIRE

Niels-Erik Wergin

2003-01-01

Teamwork in the automotive industry varies significantly from plant to plant. This article compares teamwork in four automobile plants in Germany and Britain, and addresses two questions: (1) Do different models of teamwork fit into a bi-polar model of teamwork, being either innovative or structural conservative? (2) Do current models of teamwork signify a development towards post-fordism, or are they merely part of a neo-fordist rationalisation of production? The following answers are sugges...

Automobile inspection system based on wireless communication

Science.gov (United States)

Miao, Changyun; Ye, Chunqing

2010-07-01

This paper aims to research the Automobile Inspection System based on Wireless Communication, and suggests an overall design scheme which uses GPS for speed detection and Bluetooth and GPRS for communication. The communication between PDA and PC was realized by means of GPRS and TCP/IP; and the hardware circuit and software for detection terminal were devised by means of JINOU-3264 Bluetooth Module after analyzing the Bluetooth and its communication protocol. According to the results of debugging test, this system accomplished GPRS based data communication and management as well as the real-time detection on auto safety performance parameters in crash test via PC, whereby the need for mobility and reliability was met and the efficiency and level of detection was improved.

Employability and Technical Skill Required to Establish a Small Scale Automobile Workshop

Science.gov (United States)

Olaitan, Olawale O.; Ikeh, Joshua O.

2015-01-01

The study focused on identifying the employability and technical skills needed to establish small-scale automobile workshop in Nsukka Urban of Enugu State. Five purposes of the study were stated to guide the study. Five research questions were stated and answered in line with the purpose of the study. The population for the study is 1,500…

75 FR 72965 - Federal Travel Regulation; Removal of Privately Owned Vehicle Rates; Privately Owned Automobile...

Science.gov (United States)

2010-11-29

... rate based on the type of POV you actually use (privately owned airplane, privately owned automobile... HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E) 0 29. The authority citation for 41...

DETECTION RELEVANCY OF SOME FACTORS INFLUENCING ON AIR POLLUTION FROM AUTOMOBILE AND ROAD COMPLEX

Directory of Open Access Journals (Sweden)

Radkevich, M.

2013-01-01

Full Text Available The dependence between the pavement evenness and the emissions of air pollutants from automobile – road sector is detected. It is proposed to take the pavement evenness for the assessment criterion of greenhouse and other gases emissions.

Automobile dependence in cities: An international comparison of urban transport and land use patterns with implications for sustainability

International Nuclear Information System (INIS)

Kenworthy, J.R.; Laube, F.B.

1996-01-01

Cities around the world are subject to increasing levels of environmental impact from dependence on the automobile. In the highly auto-dependent cities of the US and Australia, this is manifested in problems such as urban sprawl and its destruction of prime farming land and natural landscapes, photochemical smog that can be primarily attributed to auto emissions. On top of the more local impacts of the automobile, the global dimension should not be forgotten. Perhaps the two most pressing issues in this regard are the oil problem and the greenhouse problem. A comparison of global cities over the period 1980 to 1990 reveals large differences in automobile dependence with implications for the future sustainability of cities in different countries. This study explores some of the underlying land use, transport, and economic reasons for these different transport patterns. It briefly reviews what the sustainability agenda means for transport and land use patterns in cities and suggests a suite of targets or goals for sustainability by which cities might measure their current directions and plans

Electric and Hybrid Vehicle Technology: TOPTEC

Energy Technology Data Exchange (ETDEWEB)

1992-01-01

Today, growing awareness of environmental and energy issues associated with the automobile has resulted in renewed interest in the electric vehicle. In recognition of this, the Society of Automotive Engineers has added a TOPTEC on electric vehicles to the series of technical symposia focused on key issues currently facing industry and government. This workshop on the Electric and Hybrid Vehicle provides an opportunity to learn about recent progress in these rapidly changing technologies. Research and development of both the vehicle and battery system has accelerated sharply and in fact, the improved technologies of the powertrain system make the performance of today's electric vehicle quite comparable to the equivalent gasoline vehicle, with the exception of driving range between refueling'' stops. Also, since there is no tailpipe emission, the electric vehicle meets the definition of Zero Emission Vehicle: embodied in recent air quality regulations. The discussion forum will include a review of the advantages and limitations of electric vehicles, where the technologies are today and where they need to be in order to get to production level vehicles, and the service and maintenance requirements once they get to the road. There will be a major focus on the status of battery technologies, the various approaches to recharge of the battery systems and the activities currently underway for developing standards throughout the vehicle and infrastructure system. Intermingled in all of this technology discussion will be a view of the new relationships emerging between the auto industry, the utilities, and government. Since the electric vehicle and its support system will be the most radical change ever introduced into the private vehicle sector of the transportation system, success in the market requires an understanding of the role of all of the partners, as well as the new technologies involved.

Electric and Hybrid Vehicle Technology: TOPTEC

Energy Technology Data Exchange (ETDEWEB)

1992-12-01

Today, growing awareness of environmental and energy issues associated with the automobile has resulted in renewed interest in the electric vehicle. In recognition of this, the Society of Automotive Engineers has added a TOPTEC on electric vehicles to the series of technical symposia focused on key issues currently facing industry and government. This workshop on the Electric and Hybrid Vehicle provides an opportunity to learn about recent progress in these rapidly changing technologies. Research and development of both the vehicle and battery system has accelerated sharply and in fact, the improved technologies of the powertrain system make the performance of today`s electric vehicle quite comparable to the equivalent gasoline vehicle, with the exception of driving range between ``refueling`` stops. Also, since there is no tailpipe emission, the electric vehicle meets the definition of ``Zero Emission Vehicle: embodied in recent air quality regulations. The discussion forum will include a review of the advantages and limitations of electric vehicles, where the technologies are today and where they need to be in order to get to production level vehicles, and the service and maintenance requirements once they get to the road. There will be a major focus on the status of battery technologies, the various approaches to recharge of the battery systems and the activities currently underway for developing standards throughout the vehicle and infrastructure system. Intermingled in all of this technology discussion will be a view of the new relationships emerging between the auto industry, the utilities, and government. Since the electric vehicle and its support system will be the most radical change ever introduced into the private vehicle sector of the transportation system, success in the market requires an understanding of the role of all of the partners, as well as the new technologies involved.

Electric and hybrid vehicle technology: TOPTEC

Science.gov (United States)

Today, growing awareness of environmental and energy issues associated with the automobile has resulted in renewed interest in the electric vehicle. In recognition of this, the Society of Automotive Engineers has added a TOPTEC on electric vehicles to the series of technical symposia focused on key issues currently facing industry and government. This workshop on the Electric and Hybrid Vehicle provides an opportunity to learn about recent progress in these rapidly changing technologies. Research and development of both the vehicle and battery system has accelerated sharply and in fact, the improved technologies of the powertrain system make the performance of today's electric vehicle quite comparable to the equivalent gasoline vehicle, with the exception of driving range between 'refueling' stops. Also, since there is no tailpipe emission, the electric vehicle meets the definition of 'Zero Emission Vehicle: embodied in recent air quality regulations. The discussion forum will include a review of the advantages and limitations of electric vehicles, where the technologies are today and where they need to be in order to get to production level vehicles, and the service and maintenance requirements once they get to the road. There will be a major focus on the status of battery technologies, the various approaches to recharge of the battery systems and the activities currently underway for developing standards throughout the vehicle and infrastructure system. Intermingled in all of this technology discussion will be a view of the new relationships emerging between the auto industry, the utilities, and government. Since the electric vehicle and its support system will be the most radical change ever introduced into the private vehicle sector of the transportation system, success in the market requires an understanding of the role of all of the partners, as well as the new technologies involved.

Comparative requirements for electric energy for production of hydrogen fuel and/or recharging of battery electric automobile fleets in New Zealand and the United States

Energy Technology Data Exchange (ETDEWEB)

Kruger, Paul [Stanford University, Stanford, CA 94305 (United States); Leaver, Jonathan D. [Department of Civil Engineering, Unitec NZ, Auckland 1142 (New Zealand)

2010-10-15

Within the current outlook for sustainable electric energy supply with concomitant reduction in emission of greenhouse gases, accelerated attention is focusing on the long-term development of hydrogen fuel cell and all-electric battery vehicles to provide alternative fuels to replace petroleum-derived fuels for automotive national fleets. The potential varies significantly between large industrially developed nations and smaller industrially developing nations. The requirement for additional electric energy supply from low-specific energy renewable resources and high-specific energy nuclear resources depends strongly on individual national economic, environmental, and political factors. Analysis of the additional electric energy supply required for the two potential large-scale technologies for fueling future national transportation sectors is compared for a large Organization for Economic Co-operation and Development (OECD) nation (USA) with a small OECD nation (New Zealand), normalized on a per-capita basis. (author)

Talking about the Automobile Braking System

Science.gov (United States)

Xu, Zhiqiang

2017-12-01

With the continuous progress of society, the continuous development of the times, people’s living standards continue to improve, people continue to improve the pursuit. With the rapid development of automobile manufacturing, the car will be all over the tens of thousands of households, the increase in car traffic, a direct result of the incidence of traffic accidents. Brake system is the guarantee of the safety of the car, its technical condition is good or bad, directly affect the operational safety and transportation efficiency, so the brake system is absolutely reliable. The requirements of the car on the braking system is to have a certain braking force to ensure reliable work in all cases, light and flexible operation. Normal braking should be good performance, in addition to a foot sensitive, the emergency brake four rounds can not be too long, not partial, not ring.

Electric Vehicle Communications Standards Testing and Validation - Phase II: SAE J2931/1

Energy Technology Data Exchange (ETDEWEB)

Pratt, Richard M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gowri, Krishnan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2013-01-15

Vehicle to grid communication standards enable interoperability among vehicles, charging stations and utility providers and provide the capability to implement charge management. Several standards initiatives by the Society of Automobile Engineers (SAE), International Standards Organization and International Electrotechnical Commission (ISO/IEC), and ZigBee/HomePlug Alliance are developing requirements for communication messages and protocols. Recent work by the Electric Power Research Institute (EPRI) in collaboration with SAE and automobile manufacturers has identified vehicle to grid communication performance requirements and developed a test plan as part of SAE J2931/1 committee work. This laboratory test plan was approved by the SAE J2931/1 committee and included test configurations, test methods, and performance requirements to verify reliability, robustness, repeatability, maximum communication distance, and authentication features of power line carrier (PLC) communication modules at the internet protocol layer level. The goal of the testing effort was to select a communication technology that would enable automobile manufacturers to begin the development and implementation process. The EPRI/Argonne National Laboratory (ANL)/Pacific Northwest National Laboratory (PNNL) testing teams divided the testing so that results for each test could be presented by two teams, performing the tests independently. The PNNL team performed narrowband PLC testing including the Texas Instruments (TI) Concerto, Ariane Controls AC-CPM1, and the MAXIM Tahoe 2 evaluation boards. The scope of testing was limited to measuring the vendor systems communication performance between Electric Vehicle Support Equipment (EVSE) and plug-in electric vehicles (PEV). The testing scope did not address PEV’s CAN bus to PLC or PLC to EVSE (Wi-Fi, cellular, PLC Mains, etc.) communication integration. In particular, no evaluation was performed to delineate the effort needed to translate the IPv6

Drivers of Finished-Goods Inventory in the U.S. Automobile Industry

OpenAIRE

Gérard P. Cachon; Marcelo Olivares

2010-01-01

Automobile manufacturers in the U.S. supply chain exhibit significant differences in their days of supply of finished vehicles (average inventory divided by average daily sales rate). For example, from 1995 to 2004, Toyota consistently carried approximately 30 fewer days of supply than General Motors. This suggests that Toyota's well-documented advantage in manufacturing efficiency, product design, and upstream supply chain management extends to their finished-goods inventory in their downstr...

Comparison study of multistep forging and injection forging of automobile fasteners

OpenAIRE

Chen Senyong; Qin Yi

2015-01-01

In order to improve production efficiency, injection forging as a feasible approach was introduced to automobile fasteners production. In the study reported in this paper, two forging approaches, traditional multistep forging and injection forging, were analysed by using a finite element method. Using ABAQUS and DEFORM, some significant factors, namely, forging force, energy consumption, component accuracy and stress distribution in the die, were compared to explore the potential and challeng...

Electromagnetic interference in electrical systems of motor vehicles

Science.gov (United States)

Dziubiński, M.; Drozd, A.; Adamiec, M.; Siemionek, E.

2016-09-01

Electronic ignition system affects the electronic equipment of the vehicle by electric and magnetic fields. The measurement of radio electromagnetic interference originating from the ignition system affecting the audiovisual test bench was carried out with a variable speed of the ignition system. The paper presents measurements of radio electromagnetic interference in automobiles. In order to determine the level of electromagnetic interference, the audiovisual test bench was equipped with a set of meters for power consumption and assessment of the level of electromagnetic interference. Measurements of the electromagnetic interference level within the audiovisual system were performed on an experimental test bench consisting of the ignition system, starting system and charging system with an alternator and regulator.

Environmental strategies in the automobile industry; Umweltstrategien in der Automobilbranche

Energy Technology Data Exchange (ETDEWEB)

Bratzel, S.; Tellermann, R. [Center of Automotive, FHDW, Bergisch Gladbach (Germany)

2007-12-15

An actual market analysis on the environment strategies of the automobile industry concludes that the large companies react preferential with marketing measures to the climatic change debate and do not consequently support innovative environmental technology developments. The study show that the companies BMW, Toyota, and Volkswagen have the best environmental stategies, Daimler, Ford, Honda Porsche, Peugeot, Citroen show fragments of an environmental strategey, Chrysler, General Motors, Fiat, Mitsubishi and Nissan/Renault invest in marketing strategies, but not in environmental strategies.

Amplitude-phase characteristics of regulators of high -speed automobile diesels

OpenAIRE

Тырловой, С. И.

2009-01-01

The regulator frequency response has been analyzed to work out a strategy for repairing and renewal of fuel equipment used by foreign high-speed automobile diesels. For taking into consideration the heavy gradients of kinetic energy of the regulator elements the Lagrange equation of the second kind that includes the partial derivative of kinetic energy along the axis of motion of a gauge clutch was used.  Such a record, which was not kept for the known models, allowed for considerable clarifi...

The electric motor in the hybrid vehicle. A comparison of three different types of electric motors; Der Elektromotor im Hybridfahrzeug. Vergleich von drei unterschiedlichen Elektromotorentypen

Energy Technology Data Exchange (ETDEWEB)

Petschnik, Harald

2009-07-01

According to the experts, hybrid technology is the key technology in the automotive industry for the next few decades. Many of the well established automobile manufacturers are focusing their research and development activities on this upcoming technology. The big advantage of hybrid vehicles is the electrified powertrain. Due to intelligent combination of the combustion- and electric engine, the benefits of the two different powertrain configurations can be used. The following research is concerned and closely examines the role of the electric engine in the hybrid vehicle. The scope of the research is focused on the demands of an electric engine, the technical configuration, functionality and economy of three different engine types which are often used in the serial production and prototyping. In order to make a direct comparison of the performance of this different engine types, they were all tested in a go-cart. The go-carts for each engine were constructed in the same way. The interpretation of the measurement results showed that the synchronous engine with permanent magnets had the best performance when considering the level of electrical efficiency, closely followed by the switched reluctance motor. The efficiency of the electrical motor makes a high contribution to the total efficiency of the vehicle. The measurement result confirms the selection of a synchronous motor is, under consideration of the electrical efficiency, the most advantageous solution for hybrid vehicles. (orig.)

Numerical approach for optimum electromagnetic parameters of electrical machines used in vehicle traction applications

International Nuclear Information System (INIS)

Fodorean, D.; Giurgea, S.; Djerdir, A.; Miraoui, A.

2009-01-01

A large speed variation is an essential request in the automobile industry. In order to compete with diesel engines, the flux weakening technique has to be employed on the electrical machines. In this way, appropriate electromagnetic and geometrical parameters can give the desired speed. Using the inverse problem method coupled with numerical analysis by finite element method (FEM), the authors propose an optimum parameters configuration that maximizes the speed domain operation. Several types of electrical machines are under study: induction, synchronous permanent magnet, variable reluctance and transverse flux machines, respectively. With a proper non-linear model, by using analytical and numerical calculation, the authors propose an optimum solution for the speed variation of the studied drives, which will be standing for a final comparison.

Research on embedded automobile collision avoidance system

Directory of Open Access Journals (Sweden)

TAO Feng

2016-08-01

Full Text Available Taking ARM embedded Linux operating system as the development platform,combined with AVR microcontroller,while optimizing the ranging algorithm and using air ultrasonic transducer,the measurement range of which can be up to 50 meter,this paper designs a high-precision,range far,low price,various models suitable automobile collision avoidance warning system.The system adopts Forlinx OK6410 development board for the master.AVR microcontroller is responsible for taking the data of traveling distance between vehicles,and with the ARM development board via RS232 communication transfers vehicle′s distance and speed information to the ARM development boards.The system uses the established collision avoidance model to get alarm information.Experiments show that the system can accurately send out alarm information within a certain range.It is innovative and practical.

Head-up and head-down displays integration in automobiles

Science.gov (United States)

Betancur, J. Alejandro; Osorio-Gómez, Gilberto; Agudelo, J. David

2014-06-01

In automotive industry, the dashboard has been ergonomically developed in order to keep the driver focused on the horizon while driving, but the possibility to access external electronic devices constraints the driver to turn away his face, generating dangerous situations in spite of the short periods of time. Therefore, this work explores the integration of Head-Up Displays and Head-Down Displays in automobiles, proposing configurations that give to drivers the facility to driving focused. In this way, some of the main ergonomic comments about those configurations are proposed; and also, some technical comments regarding the implemented arrangements are given.

Prevalence and predictors of home and automobile smoking bans and child environmental tobacco smoke exposure: a cross-sectional study of U.S.- and Mexico-born Hispanic women with young children

Directory of Open Access Journals (Sweden)

Kegler Michelle C

2006-10-01

Full Text Available Abstract Background Detrimental effects of environmental tobacco smoke (ETS exposure on child health are well documented. Because young children's primary exposure to ETS occurs in homes and automobiles, voluntary smoking restrictions can substantially reduce exposure. We assessed the prevalence of home and automobile smoking bans among U.S.- and Mexico-born Hispanics in the southwestern United States, and examined the influence of mother's country of birth and smoking practices on voluntary smoking bans and on child ETS exposure. Methods U.S.- and Mexico-born Hispanic mothers of children aged 2 through 12 years were systematically sampled from health clinics in Albuquerque, New Mexico. In-person interviews were conducted with 269 mothers (75.4% response rate to obtain information on main study outcomes (complete versus no/partial home and automobile smoking bans; child room and automobile ETS exposure and risk factors (mother's country of birth, maternal and household smoking behaviors. Data were analyzed with chi square tests and logistic regression models. Results Three-fourths (74–77% of U.S.-born and 90–95% of Mexico-born mothers reported complete automobile and home smoking bans. In multivariate analyses, mother's U.S nativity, mother's current smoking, and presence of other adult smokers in the home were associated with significantly increased odds of not having a complete home or automobile smoking ban. Mother's smoking was associated with child ETS exposure both indoors (odds ratio [OR] = 3.31 and in automobiles (OR = 2.97. Children of U.S.-born mothers had increased odds of exposure to ETS indoors (OR = 3.24; 95% confidence interval [CI]: 1.37–7.69, but not in automobiles. Having complete smoking bans was associated with substantially reduced odds of child ETS exposure both indoors (OR = 0.10; 95% CI: 0.04–0.27 and in automobiles (OR = 0.14; 95% CI: 0.05–0.36. Conclusion This study of Hispanic mothers in the southwestern U

[Environmental pollution by products of wear and tear automobile-road complex].

Science.gov (United States)

Levanchuk, A V

2014-01-01

North-West State Medical University named after I.I. Mechnikov, Saint Petersburg, Russian Federation, 191015. There is supposed the method for the assessment of amounts of pollutants released into the environment during the operational wear of tyre treads, brake system of cars and the road pavement. There are presented results of chemical analysis of residues of combustion. The necessity of control of products of work wear of automobile-road complex has been substantiated.

Environmental and biological monitoring of benzene during self-service automobile refueling.

OpenAIRE

Egeghy, P P; Tornero-Velez, R; Rappaport, S M

2000-01-01

Although automobile refueling represents the major source of benzene exposure among the nonsmoking public, few data are available regarding such exposures and the associated uptake of benzene. We repeatedly measured benzene exposure and uptake (via benzene in exhaled breath) among 39 self-service customers using self-administered monitoring, a technique rarely used to obtain measurements from the general public (130 sets of measurements were obtained). Benzene exposures averaged 2.9 mg/m(3) (...

ESTIMATED RATE OF FATAL AUTOMOBILE ACCIDENTS ATTRIBUTABLE TO ACUTE SOLVENT EXPOSURE AT LOW INHALED CONCENTRATIONS

Science.gov (United States)

Acute solvent exposures may contribute to automobile accidents because they increase reaction time and decrease attention, in addition to impairing other behaviors. These effects resemble those of ethanol consumption, both with respect to behavioral effects and neurological mecha...

AUTOMATIC CONTROL SYSTEM OF WINTER AUTOMOBILE-ROAD MAINTENANCE

Directory of Open Access Journals (Sweden)

I. I. Leonovich

2008-01-01

Full Text Available In order to ensure a rational usage of financial and material resources directed on winter automobile-road maintenance in theRepublicofBelarusan automatic control system of winter maintenance is under its development and introduction.  The main purpose of the system is to obtain and use meteorological information on the state of a road network that allows to take necessary organizational and technological solutions ensuring safety and continuity of traffic during winter. This system also presupposes to ensure constant control over the state of roadway covering, expenditure of anti-glazed frost materials at all levels of management.The paper considers main aspects pertaining to introduction of the automatic control system of winter maintenance

An Innovative Approach to Enhancing the Sustainable Development of Japanese Automobile Suppliers

Directory of Open Access Journals (Sweden)

Chia-Nan Wang

2016-04-01

Full Text Available The Japanese automobile industry has been hit sharply by the economic downturn of recent decades. The rise in costs and decline in sales have led to serious problems in the auto industry. In order to address these issues, most companies engage in downsizing and redesigning production operations. It is crucial to investigate the time wasted by replacing assembly boards occurring in manufacturing lines. Therefore, the aim of this study was to provide an integrated approach, Teoriya Resheniya Izobreatatelskih Zadatch (TRIZ, to providing efficient solutions for the automobile industry. The first step of this methodology is to detail the technical problems using the Function and Attribute Analysis (FAA model. Secondly, a contradiction matrix and the inventive principle were applied to find the solutions. In this study, an auto part supplier named Sumi-Hanel located in Hanoi, Vietnam, was taken as a case study; the empirical results showed that waste time had been reduced to 67%, nearly 8400 square meters was saved, and a 20% cost reduction was achieved by reusing old frames. The research proves that the combination of TRIZ and lean manufacturing successfully increases production performance and reduces waste due to technological advancements.

Research on simulation based material delivery system for an automobile company with multi logistics center

Science.gov (United States)

Luo, D.; Guan, Z.; Wang, C.; Yue, L.; Peng, L.

2017-06-01

Distribution of different parts to the assembly lines is significant for companies to improve production. Current research investigates the problem of distribution method optimization of a logistics system in a third party logistic company that provide professional services to an automobile manufacturing case company in China. Current research investigates the logistics leveling the material distribution and unloading platform of the automobile logistics enterprise and proposed logistics distribution strategy, material classification method, as well as logistics scheduling. Moreover, the simulation technology Simio is employed on assembly line logistics system which helps to find and validate an optimization distribution scheme through simulation experiments. Experimental results indicate that the proposed scheme can solve the logistic balance and levels the material problem and congestion of the unloading pattern in an efficient way as compared to the original method employed by the case company.

Female identity discourse in automobile advertisements

Directory of Open Access Journals (Sweden)

Montserrat López Díaz

2012-01-01

Full Text Available The article analyzes the way in which the modern car-advertisement defines the identity of women as potential purchasers – to whom it is designed to get through. The research includes language and iconic instruments by which this type of advertisement aims to create a feminized market of products formerly recognized as traditionally masculine. The identification of the addressee of each publicity material might be subsumed under a set of stereotypes, thus enabling advertisers to get across their message using the code of addressee’s own values. The present paper concentrates on the linguistic specifity of the ads for high-tech goods (automobiles targeting the feminine public and eventually points out their high degree of markedness according to the sex of addressees. Discourse analysis and a closer look at linguistic means appearing in French, Spanish and Polish automotive commercials both reveals a stereotyped woman’s image and shows how they happen to perpetutate it.

Effect of Automobile Travel Time Between Patients' Homes and Ophthalmologists' Offices on Screening for Diabetic Retinopathy.

Science.gov (United States)

Macon, Céline; Carrier, Hélène; Janczewski, Aurélie; Verger, Pierre; Casanova, Ludovic

2018-01-01

The accessibility of ophthalmologists appears to influence the quality of screening for diabetic retinopathy (DR). The principal objective of this study was to analyze the effect of automobile travel time to the closest ophthalmologist on the time to DR screening. This historical cohort study used reimbursement databases from the principal national health insurance fund. Patients were included if they had been reimbursed at least thrice for oral antidiabetic medications in the 12 months before the study start date. Patients were followed up from January 1, 2008, for 4 years. The expected event was a DR screening by an ocular fundus examination. The automobile travel time to the nearest ophthalmologist was calculated by the distance between communes, estimated by appropriate software. A Kaplan-Meier curve and a multivariate Cox model were used to model the effect of travel time on the time until DR screening. A sensitivity analysis of travel time described the results of the Cox model. At the start of 2008, 6,573 patients living in 328 different municipalities were included. The multivariate model found that patients living 60 min or more away from an ophthalmologist had a lower instantaneous probability of DR screening than those living travel time. Increased automobile travel time for patients with diabetes to the nearest ophthalmologist was associated with a longer time to DR screening.

Optimization of eyesafe avalanche photodiode lidar for automobile safety and autonomous navigation systems

Science.gov (United States)

Williams, George M.

2017-03-01

Newly emerging accident-reducing, driver-assistance, and autonomous-navigation technology for automobiles is based on real-time three-dimensional mapping and object detection, tracking, and classification using lidar sensors. Yet, the lack of lidar sensors suitable for meeting application requirements appreciably limits practical widespread use of lidar in trucking, public livery, consumer cars, and fleet automobiles. To address this need, a system-engineering perspective to eyesafe lidar-system design for high-level advanced driver-assistance sensor systems and a design trade study including 1.5-μm spot-scanned, line-scanned, and flash-lidar systems are presented. A cost-effective lidar instrument design is then proposed based on high-repetition-rate diode-pumped solid-state lasers and high-gain, low-excess-noise InGaAs avalanche photodiode receivers and focal plane arrays. Using probabilistic receiver-operating-characteristic analysis, derived from measured component performance, a compact lidar system is proposed that is capable of 220 m ranging with 5-cm accuracy, which can be readily scaled to a 360-deg field of regard.

Social Sustainability Issues and Older Adults’ Dependence on Automobiles in Low-Density Environments

Directory of Open Access Journals (Sweden)

Hitomi Nakanishi

2015-06-01

Full Text Available An implicit assumption underlying government strategies to achieve a more sustainable urban transportation system is that all automobile users will be encouraged or persuaded to use more “green” transportation: public transportation, walking and cycling. Little consideration has been given as to how sustainable transportation policies and programmess might impact on different age groups in society, including those retired or semi-retired, despite the fact that an unprecedented number of older drivers will be on the highways in the next few decades. There is limited literature on the contextual factors behind their continued reliance on automobiles, their actual driving behavior (e.g., route choice and time of day to drive framed within the context of social sustainability. This paper introduces the elements of transportation and social sustainability then conducts a comprehensive international literature review focusing on older drivers, their travel choices and associated social sustainability issues. It describes a case study, low-density city and presents empirical evidence, from two surveys conducted in Canberra, Australia. The paper concludes with future research directions that address these issues associated with sustainable transportation.

Automobiles and environment - also an economic problem. Kraftfahrzeug und Umwelt - auch ein oekonomisches Problem

Energy Technology Data Exchange (ETDEWEB)

Mager, N

1981-01-01

The proliferation of cars since the early 60's and the resulting increasing spatial mobility have contributed to a considerable rise of wealth in economies based on the division of labour, it also had an influence on the creation of new or extension of existing areas of liberty. These undisputably positive effects are of the widerspread private use of cars are correlated with harmful effects on our environment. In some areas they have increased so much as to necessitate when more intensive efforts are in order to reduce pollution. The present thesis aims at describing and discussing the economic problems connected with exhaust gas control. A comprehensive economic analysis of the enviromental damages caused by automobiles and of the corresponding counterstrategies of ecologic policy must by based on the state of pollution existing in reality. The thesis therefore starts with a brief survey on the effective pollution caused by road traffic and automobiles in the Federal Republic of Germany.

Oak Ridge National Laboratory Annual Progress Report for the Power Electronics and Electric Machinery Program

Energy Technology Data Exchange (ETDEWEB)

Olszewski, M.

2008-10-15

The U.S. Department of Energy (DOE) and the U.S. Council for Automotive Research (composed of automakers Ford, General Motors, and Chrysler) announced in January 2002 a new cooperative research effort. Known as FreedomCAR (derived from 'Freedom' and 'Cooperative Automotive Research'), it represents DOE's commitment to developing public/private partnerships to fund high-risk, high-payoff research into advanced automotive technologies. Efficient fuel cell technology, which uses hydrogen to power automobiles without air pollution, is a very promising pathway to achieve the ultimate vision. The new partnership replaces and builds upon the Partnership for a New Generation of Vehicles initiative that ran from 1993 through 2001. The Advanced Power Electronics and Electric Machines (APEEM) subprogram within the Vehicle Technologies Program provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on understanding and improving the way the various new components of tomorrow's automobiles will function as a unified system to improve fuel efficiency. In supporting the development of hybrid propulsion systems, the APEEM effort has enabled the development of technologies that will significantly improve advanced vehicle efficiency, costs, and fuel economy. The APEEM subprogram supports the efforts of the FreedomCAR and Fuel Partnership through a three-phase approach intended to: (1) identify overall propulsion and vehicle-related needs by analyzing programmatic goals and reviewing industry's recommendations and requirements and then develop the appropriate technical targets for systems, subsystems, and component research and development activities; (2) develop and validate individual subsystems and components, including electric motors, and power electronics; and (3) determine how well the components and subsystems work together in a vehicle environment or as a complete propulsion

基于微博的汽车品牌传播策略研究%Strategy Researchon Automobile Brand Advertising Based on Weibo

Institute of Scientific and Technical Information of China (English)

辛晖

2015-01-01

It has been notice by automobile enterprises gradually that traditional sales mode can no longer adapt to the com-petition in the automobile market,car market has transformed from seller's market to buyer's market.With the advent of the era of network, the competition of automobile market,to a great extent,is the competition of network marketing.UsingWeibo as a new channel for automobile brand advertising is aneffective brand communication strategy.%汽车企业逐渐认识到传统的销售模式已经不再适应激烈的汽车市场竞争，汽车市场由卖方市场向买方市场转化。随着网络时代的到来，汽车市场的竞争在很大程度上体现为网络营销的竞争，以品牌为核心的营销时代。以微博作为汽车品牌传播新渠道，是汽车品牌有效传播的营销策略。

International Trade in Intermediate Inputs: The Case of the Automobile Industry

OpenAIRE

Markus Diehl

2001-01-01

International trade statistics and input-output tables are analyzed in order to test the hypothesis that international production networks have become more relevant. The share of imported inputs in the gross output value of the motor vehicle industry has grown significantly during the last two decades. Moreover, some low-income countries have become strong exporters of automobile parts, but this trade is mainly regional rather than global. Detailed results are presented in case studies on fou...

Environmental Effects of Driving Automobiles in the University of Malaya Campus: A Pilot Study

Directory of Open Access Journals (Sweden)

S.Y. Kong

2009-12-01

Full Text Available With the increase of human population there has been an evident increase in per capita automobile use and ownership, significantly to a point that almost every urban university campus faces serious challenges from the heavy traffic movement as well as the associated parking shortages. Multiple factors, including lack of land for new parking lots, high cost of building parking structures and the desire to preserve the air quality and campus green spaces are leading many educational institutions towards a new vision based upon expanded transit access, better bicycle and pedestrian facilities and financial incentives for students and staff to drive less. (Toor and Havlick, 2004 This is in stark contrast to the traditional approach to campus transportation planning of the University of Malaya (UM, Kuala Lumpur, Malaysia that allows students, staff and visitors to drive in the campus. The objective of this study is to investigate the related issues and environmental impact of allowing automobile driving in the campus. Studies will also be done to analyse the relationship between university campus planning and traffic condition. Air quality and noise pollution data of 3 selected sites in the campus will be recorded. Subsequently, the air pollutant index and noise pollution level will be identified and data analyses will be done on the data samples. Simultaneously, a survey questionnaire will be conducted to gauge the student’s attitude and degree of awareness with air and noise pollution in the campus. This pilot study reveals that the increasing use of automobiles within the campus has a negative impact on local environment and the quality of life in campus

The Effects of Automobile Recalls on the Severity of Accidents

OpenAIRE

Hugo Benitez-Silva; Yong-Kyun Bae

2010-01-01

The number of automobile recalls in the U.S. has substantially increased over the last two decades, and after a record of over 30 million cars recalled in 2004, in the last few years it has consistently reached between 15 and 17 million, and in 2009 alone 16.4 million cars were recalled. Toyota's recall crisis in 2010 illustrates how recalls can affect a large number of American drivers and the defects connected to them can result in loss of life and serious accidents. However, in spite of th...

A Review of Voiture Minimum. Le Corbusier and the Automobile

Directory of Open Access Journals (Sweden)

Christoph Schnoor

2013-03-01

Full Text Available Here is a full-on celebration of cars and someone’s addiction to cars. In its midst drives Le Corbusier. The book, Voiture Minimum. Le Corbusier and the Automobile (Cambridge, Mass. and London: MIT Press, 2011, has recently been published by Spanish architect and academic Antonio Amado. What a curious book. It is something between a detective story circling around determining the date of a single drawing (1928 or 1936 and, simultaneously, it is “Everything you always wanted to know about Le Corbusier and cars but were afraid to ask”.

Key Features of Electric Vehicle Diffusion and Its Impact on the Korean Power Market

Directory of Open Access Journals (Sweden)

Dongnyok Shim

2018-06-01

Full Text Available The market share of electric vehicles is growing and the interest in these vehicles is rapidly increasing in industrialized countries. In the light of these circumstances, this study provides an integrated policy-making package, which includes key features for electric vehicle diffusion and its impact on the Korean power market. This research is based on a quantitative analysis with the following steps: (1 it analyzes drivers’ preferences for electric or traditional internal combustion engine (ICE vehicles with respect to key automobile attributes and these key attributes indicate what policy makers should focus on; (2 it forecasts the achievable level of market share of electric vehicles in relation to improvements in their key attributes; and (3 it evaluates the impact of electric vehicle diffusion on the Korean power market based on an achievable level of market share with different charging demand profiles. Our results reveal the market share of electric vehicles can increase to around 40% of the total market share if the key features of electric vehicles reach a similar level to those of traditional vehicles. In this estimation, an increase in the power market’s system generation costs will reach around 10% of the cost in the baseline scenario, which differs slightly depending on charging demand profiles.

PRODUCT EFFICIENCY IN THE SPANISH AUTOMOBILE MARKET

Directory of Open Access Journals (Sweden)

González, Eduardo

2013-01-01

Full Text Available This paper evaluates product efficiency in the Spanish automobile market. We use non parametric frontier techniques in order to estimate product efficiency scores for each model. These scores reflect the minimum price for which each car could be sold, given the bundle of tangible features it offers in comparison to the best-buy models. Unlike previous research, we use discounted prices which have been adjusted by car dealerships to meet sale targets. Therefore, we interpret the efficiency scores as indicators of the value of the intangible features of the brand. The results show that Audi, Volvo, Volkswagen and Mercedes offer the greatest intangible value, since they are heavily overpriced in terms of price/product ratios. Conversely, Seat, Kia, Renault and Dacia are the brands that can be taken as referent in terms of price/product ratios.

Energy efficient motion control of the electric bus on route

Science.gov (United States)

Kotiev, G. O.; Butarovich, D. O.; Kositsyn, B. B.

2018-02-01

At present, the urgent problem is the reduction of energy costs of urban motor transport. The article proposes a method of solving this problem by developing an energy-efficient law governing the movement of an electric bus along a city route. To solve this problem, an algorithm is developed based on the dynamic programming method. The proposed method allows you to take into account the constraints imposed on the phase coordinates, control action, as well as on the time of the route. In the course of solving the problem, the model of rectilinear motion of an electric bus on a horizontal reference surface is considered, taking into account the assumptions that allow it to be adapted for the implementation of the method. For the formation of a control action in the equations of motion dynamics, an algorithm for changing the traction / braking torque on the wheels of an electric bus is considered, depending on the magnitude of the control parameter and the speed of motion. An optimal phase trajectory was obtained on a selected section of the road for the prototype of an electric bus. The article presents the comparison of simulation results obtained with the optimal energy efficient control law with the results obtained by a test driver. The comparison proved feasibility of the energy efficient control law for the automobile city electric transport.

Effects of the introduction of electric vehicles and plug-in hybrids on sources of energy and the electricity grid; Auswirkungen der Markteinfuehrung von Elektrofahrzeugen und Plug-In-Hybrids auf die Energietraeger und das Elektrizitaetsnetz. Bericht

Energy Technology Data Exchange (ETDEWEB)

Rigassi, R.; Huber, S. [Enco AG, Liestal (Switzerland); Strub, P. [Pierre Strub - nachhaltig wirkt, Basel (Switzerland)

2010-12-15

This comprehensive final report for the Swiss federal Office of Energy (SFOE) discusses the effects of the introduction of electric vehicles and plug-in hybrids on sources of energy and the electricity grid. According to the authors, the introduction of electric drives in the automobile sector will cause no important additional consumption of electricity by 2035 for an expected percentage of around 25% of all vehicles being wholly or partly electrically powered; fossil fuel consumption can, however, be reduced by almost a quarter. The energy storage function of the batteries in electric vehicles can additionally be used to help integrate the high proportion of stochastically generated wind and solar power in the power grid. Energy and CO{sub 2} balances for electric vehicles and plug-in hybrids are discussed, as is the use of vehicle batteries as part of a 'vehicle-to-grid' system that can help regulate the electricity mains. The potential for using vehicles for the supply of regulating energy is looked at. Charge optimisation and mains feed-in are discussed. The ecological effects of this regulating function are examined in the European context. Relationships to other energy scenarios are presented and discussed. Finally, conclusions are drawn and recommendations are made. Questions still to be examined are listed.

Trees in urban street canyons and their impact on the dispersion of automobile exhausts

NARCIS (Netherlands)

Gromke, C.B.; Ruck, B.

2007-01-01

The aim of the present study is to clarify the influence of trees on the dispersion of automobile exhausts in urban street canyons. For this purpose, measurements have been performed with a small scale wind tunnel model of an idealized, isolated street canyon with model trees placed along the canyon

[Epidemiological features of automobile traumatism in Russia and abroad].

Science.gov (United States)

Iakunin, S A

2007-01-01

The article presents updated epidemiological information on specific features and causes of high automobile traumatism in Russia and abroad for the last 5 years. The number of road accidents and road accident fatalities now not only present a great social-medical problem in Russia but also a problem of national security as road accident mortality is far ahead of the developed countries and showed no trend to lowering. This threatening situation is caused by out-of-date transport infrastructure, social factors, old cars without modern safety systems, absence of special emergency medical care for road accident victims. The experience of foreign countries on reducing road traumatism is analysed.

A knowledge-based system for controlling automobile traffic

Science.gov (United States)

Maravas, Alexander; Stengel, Robert F.

1994-01-01

Transportation network capacity variations arising from accidents, roadway maintenance activity, and special events as well as fluctuations in commuters' travel demands complicate traffic management. Artificial intelligence concepts and expert systems can be useful in framing policies for incident detection, congestion anticipation, and optimal traffic management. This paper examines the applicability of intelligent route guidance and control as decision aids for traffic management. Basic requirements for managing traffic are reviewed, concepts for studying traffic flow are introduced, and mathematical models for modeling traffic flow are examined. Measures for quantifying transportation network performance levels are chosen, and surveillance and control strategies are evaluated. It can be concluded that automated decision support holds great promise for aiding the efficient flow of automobile traffic over limited-access roadways, bridges, and tunnels.

The Effect of the Arab Boycott on Israel: The Automobile Market

OpenAIRE

Chaim Fershtman; Neil Gandal

1996-01-01

Recent progress towards a comprehensive peace in the Middle East has led to a relaxation of the enforcement of the Arab economic boycott of Israel. This in turn has led to the entry of all the major Japanese and Korean automobile manufacturers into the Israeli market. In this paper, we examine the effect of the Arab economic boycott on this market. Using recent advances in estimating discrete-choice models of product differentiation, we estimate that had the boycott continued, the welfare los...

Limits to leapfrogging in energy technologies? Evidence from the Chinese automobile industry

International Nuclear Information System (INIS)

Gallagher, Kelly Sims

2006-01-01

Limits to leapfrogging in energy technologies? One of the most attractive notions in the field of sustainable energy development is the concept of energy-technology 'leapfrogging'. Leapfrogging through international technology transfer can be especially problematic because often developing countries do not have the technological capabilities to produce or integrate the advanced energy technologies themselves. Until they have acquired the capabilities to produce the advanced technologies themselves, most late-industrializing countries buy their new technologies from industrialized countries, usually through licensing or joint-venture arrangements. Empirical case studies of the three main Sino-US passenger-car joint ventures reveal that until the late 1990s, little energy or environmental leapfrogging occurred in the Chinese automobile industry as the result of the introduction of US automotive technology. An improvement in Chinese capabilities and more stringent Chinese energy and environmental policies are needed to induce energy leapfrogging in the Chinese automobile industry. Foreign firms also have a social responsibility to contribute to China's sustainable industrial development. In order to realize the promise of the leapfrogging, the limits to leapfrogging must be identified and acknowledged so that strategies can be devised to surmount the barriers to the introduction of advanced energy technologies in developing countries

Perception of risk from automobile safety defects.

Science.gov (United States)

Slovic, P; MacGregor, D; Kraus, N N

1987-10-01

Descriptions of safety engineering defects of the kind that compel automobile manufacturers to initiate a recall campaign were evaluated by individuals on a set of risk characteristic scales that included overall vehicle riskiness, manufacturer's ability to anticipate the defect, importance for vehicle operation, severity of consequences and likelihood of compliance with a recall notice. A factor analysis of the risk characteristics indicated that judgments could be summarized in terms of two composite scales, one representing the uncontrollability of the damage the safety defect might cause and the other representing the foreseeability of the defect by the manufacturer. Motor vehicle defects were found to be highly diverse in terms of the perceived qualities of their risks. Location of individual defects within the factor space was closely associated with perceived riskiness, perceived likelihood of purchasing another car from the same manufacturer, perceived likelihood of compliance with a recall notice, and actual compliance rates.

Optimizing Diamond Structured Automobile Supply Chain Network Towards a Robust Business Continuity Management

Directory of Open Access Journals (Sweden)

Abednico Montshiwa

2016-02-01

Full Text Available This paper presents an optimized diamond structured automobile supply chain network towards a robust Business Continuity Management model. The model is necessitated by the nature of the automobile supply chain. Companies in tier two are centralized and numerically limited and have to supply multiple tier one companies with goods and services. The challenge with this supply chain structure is the inherent risks in the supply chain. Once supply chain disruption takes place at tier 2 level, the whole supply chain network suffers huge loses. To address this challenge, the paper replaces Risk Analysis with Risk Ranking and it introduces Supply Chain Cooperation (SCC to the traditional Business Continuity Plan (BCP concept. The paper employed three statistical analysis techniques (correlation analysis, regression analysis and Smart PLS 3.0 calculations. In this study, correlation and regression analysis results on risk rankings, SCC and Business Impact Analysis were significant, ascertaining the value of the model. The multivariate data analysis calculations demonstrated that SCC has a positive total significant effect on risk rankings and BCM while BIA has strongest positive effects on all BCP factors. Finally, sensitivity analysis demonstrated that company size plays a role in BCM.

Energy-harvesting potential of automobile suspension

Science.gov (United States)

Múčka, Peter

2016-12-01

This study is aimed quantify dissipated power in a damper of automobile suspension to predict energy harvesting potential of a passenger car more accurately. Field measurements of power dissipation in a regenerative damper are still rare. The novelty is in using the broad database of real road profiles, a 9 degrees-of-freedom full-car model with real parameters, and a tyre-enveloping contact model. Results were presented as a function of road surface type, velocity and road roughness characterised by International Roughness Index. Results were calculated for 1600 test sections of a total length about 253.5 km. Root mean square of a dissipated power was calculated from 19 to 46 W for all four suspension dampers and velocity 60 km/h and from 24 to 58 W for velocity 90 km/h. Results were compared for a full-car model with a tyre-enveloping road contact, full-car and quarter-car models with a tyre-road point contact. Mean difference among three models in calculated power was a few per cent.

FY2009 Oak Ridge National Laboratory Annual Progress Report for the Power Electronics and Electric Machinery

Energy Technology Data Exchange (ETDEWEB)

Olszewski, Mitchell [ORNL

2009-11-01

The U.S. Department of Energy (DOE) and the U.S. Council for Automotive Research (composed of automakers Ford, General Motors, and Chrysler) announced in January 2002 a new cooperative research effort. Known as FreedomCAR (derived from 'Freedom' and 'Cooperative Automotive Research'), it represents DOE's commitment to developing public/private partnerships to fund high-risk, high-payoff research into advanced automotive technologies. Efficient fuel cell technology, which uses hydrogen to power automobiles without air pollution, is a very promising pathway to achieve the ultimate vision. The new partnership replaces and builds upon the Partnership for a New Generation of Vehicles initiative that ran from 1993 through 2001. The Oak Ridge National Laboratory's (ORNL's) Advanced Power Electronics and Electric Machines (APEEM) subprogram within the Vehicle Technologies Program provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on understanding and improving the way the various new components of tomorrow's automobiles will function as a unified system to improve fuel efficiency. In supporting the development of advanced vehicle propulsion systems, the APEEM effort has enabled the development of technologies that will significantly improve efficiency, costs, and fuel economy. The APEEM subprogram supports the efforts of the FreedomCAR and Fuel Partnership through a three-phase approach intended to: (1) identify overall propulsion and vehicle-related needs by analyzing programmatic goals and reviewing industry's recommendations and requirements and then develop the appropriate technical targets for systems, subsystems, and component research and development activities; (2) develop and validate individual subsystems and components, including electric motors and power electronics; and (3) determine how well the components and subsystems work together in a vehicle

Simulation of absorption refrigeration system for automobile application

Directory of Open Access Journals (Sweden)

Ramanathan Anand

2008-01-01

Full Text Available An automotive air-conditioning system based on absorption refrigeration cycle has been simulated. This waste heat driven vapor absorption refrigeration system is one alternate to the currently used vapour compression refrigeration system for automotive air-conditioning. Performance analysis of vapor absorption refrigeration system has been done by developing a steady-state simulation model to find the limitation of the proposed system. The water-lithium bromide pair is used as a working mixture for its favorable thermodynamic and transport properties compared to the conventional refrigerants utilized in vapor compression refrigeration applications. The pump power required for the proposed vapor absorption refrigeration system was found lesser than the power required to operate the compressor used in the conventional vapor compression refrigeration system. A possible arrangement of the absorption system for automobile application is proposed.

Automobile Driver Fingerprinting

Directory of Open Access Journals (Sweden)

Enev Miro

2016-01-01

Full Text Available Today’s automobiles leverage powerful sensors and embedded computers to optimize efficiency, safety, and driver engagement. However the complexity of possible inferences using in-car sensor data is not well understood. While we do not know of attempts by automotive manufacturers or makers of after-market components (like insurance dongles to violate privacy, a key question we ask is: could they (or their collection and later accidental leaks of data violate a driver’s privacy? In the present study, we experimentally investigate the potential to identify individuals using sensor data snippets of their natural driving behavior. More specifically we record the in-vehicle sensor data on the controllerarea- network (CAN of a typical modern vehicle (popular 2009 sedan as each of 15 participants (a performed a series of maneuvers in an isolated parking lot, and (b drove the vehicle in traffic along a defined ~ 50 mile loop through the Seattle metropolitan area. We then split the data into training and testing sets, train an ensemble of classifiers, and evaluate identification accuracy of test data queries by looking at the highest voted candidate when considering all possible one-vs-one comparisons. Our results indicate that, at least among small sets, drivers are indeed distinguishable using only incar sensors. In particular, we find that it is possible to differentiate our 15 drivers with 100% accuracy when training with all of the available sensors using 90% of driving data from each person. Furthermore, it is possible to reach high identification rates using less than 8 minutes of training data. When more training data is available it is possible to reach very high identification using only a single sensor (e.g., the brake pedal. As an extension, we also demonstrate the feasibility of performing driver identification across multiple days of data collection

On board fuel processing for using in electric vehicles

International Nuclear Information System (INIS)

Paez, Daniel E.; Marquez, Marco A.

1999-01-01

The increase in vehicle population, the emission effects upon the environment, and the growing concern of industrialized nations to reduce oil dependency, are the arguments for the new developments that may change the automobile revolution within the next decades. However, the electricity to move the future vehicles must come from the processing of liquid fuels on board. Liquid fuels such as gasoline have the advantage of having good on-site system for distribution and supply directly to the vehicle and will compete for staying as the energy source of the future. What are the opportunities in R and D and how to take advantage of them are analyzed in this document. Liquid fuel processing technologies and fuel options are also described by PDVSA-INTEVEP

Automobile Industry Strategic Alliance Partner Selection: The Application of a Hybrid DEA and Grey Theory Model

Directory of Open Access Journals (Sweden)

Chia-Nan Wang

2016-02-01

Full Text Available Finding the right strategic alliance partner is a critical success factor for many enterprises. Therefore, the purpose of this study is to propose an effective approach based on grey theory and data envelopment analysis (DEA for selecting better partners for alliance. This study used grey forecasting to predict future business performances and used DEA for the partner selection of alliances. This research was implemented with realistic public data in four consecutive financial years (2009–2012 of the world’s 20 biggest automobile enterprises. Nissan Motor Co., Ltd was set to be the target decision making unit (DMU. The empirical results showed that, among 19 candidate DMUs, Renault (DMU10 and Daimler (DMU11 were the two feasible beneficial alliance partners for Nissan. Although this research is specifically applied to the automobile industry, the proposed method could also be applied to other manufacturing industries.

Risk factors for automobile accidents caused by falling asleep while driving in obstructive sleep apnea syndrome.

Science.gov (United States)

Arita, Aki; Sasanabe, Ryujiro; Hasegawa, Rika; Nomura, Atsuhiko; Hori, Reiko; Mano, Mamiko; Konishi, Noriyuki; Shiomi, Toshiaki

2015-12-01

We examined the risk factors for automobile accidents caused by falling asleep while driving in subjects with obstructive sleep apnea syndrome (OSAS). We asked licensed drivers with history of snoring and excessive daytime sleepiness who had undergone polysomnography (PSG) at the Department of Sleep Medicine/Sleep Disorders Center at Aichi Medical University Hospital to complete the questionnaires on accidents caused by falling asleep while driving. As a subjective measure of sleepiness, we used the Epworth sleepiness scale (ESS). Based on PSG results, 2387 subjects diagnosed with OSAS were divided into three groups according to apnea-hypopnea index (AHI): mild-to-moderate (5 ≤ AHI accidents in the past 5 years due to falling asleep. Our multivariate analysis suggests that scores on the ESS and patient-reported frequency of feeling drowsy while regular driving and working are related to automobile accidents caused by falling asleep while driving.

Assessment of trace metals using lichen transplant from automobile mechanic workshop in Ile-Ife metropolis, Nigeria.

Science.gov (United States)

Odiwe, Anthony I; Adesanwo, Adeyemi T J; Olowoyo, Joshua O; Raimi, Idris O

2014-04-01

The level of air pollution around the automobile mechanic workshops has been generally overlooked. This study, examined the level of trace metals in automobile mechanic workshops and the suitability of using transplanted lichen thalli of Lepraria incana for measuring air pollution in such areas. Samples of the lichen thalli were transplanted into seven different sites and were attached to the bark of trees at each site. The samples were harvested from the sites after 3-month exposure. Concentrations of Pb, Cu, Cd, Fe, Zn, and S content were determined using an atomic absorption spectrophotometer. Results showed that there was a significant difference in the trace metals concentrations across the sites (p trend in the concentration of these heavy metals suggests that activities in these workshops might become a major source of certain heavy metals in the environment and if the pollution activities persist, it might become worrisome over time.

Advice of the Italian CCTN on the health risk assessment relative to exposure to automobile emissions

Energy Technology Data Exchange (ETDEWEB)

Camoni, I [ed.; Istituto Superiore di Sanita` , Rome (Italy). Lab. di Tossicologia Applicata; Mucci, N [ed.; ISPESL, Monteporzio Catone, Roma (Italy). Dip. di Medicina del Lavoro; Foa` , V [ed.; Milan Univ. (Italy). Clinica del lavoro Luigi Devoto

1998-06-01

The period 1990-1995 are reported, they concern the health impact of exposure to benzene and polycyclic aromatic hydrocarbons (PAHs), resulting from automobile exhaust products, for Italian general and occupationally exposed populations. The first recommendation takes into consideration the possible long-term effects of the unleaded gasoline, recently introduced in Italy. The latter two recommendations concern the quantitative evaluation of the risk of leukaemia and of the risk of lung cancer from exposure to benzene and PAHs, resulting from automobile exhaust. [Italiano] Sono riportati i pareri espressi dalla Commissione Consultiva Tossicologica Nazionale (CCTN) nel periodo 1990-1995 riguardanti la valutazione del rischio cancerogeno per esposizione a sostanze contenute nelle emissioni autoveicolari. In particolare, viene stimato il rischio aggiuntivo di leucemia per esposizione a benzene e di cancro polmonare per esposizione a idrocarburi policiclici aromatici (IPA), sia per la popolazione generale che per quella professionalmente esposta.

49 CFR 655.4 - Definitions.

Science.gov (United States)

2010-10-01

...) Carrying a firearm for security purposes. Vehicle means a bus, electric bus, van, automobile, rail car... involved is a bus, electric bus, van, or automobile, one or more vehicles (including non-FTA funded... the mass transit vehicle involved is a rail car, trolley car, trolley bus, or vessel, the mass transit...

Navigating Without Road Maps: The Early Business of Automobile Route Guide Publishing in the United States

Science.gov (United States)

Bauer, John T.

2018-05-01

In the United States, automobile route guides were important precursors to the road maps that Americans are familiar with today. Listing turn-by-turn directions between cities, they helped drivers navigate unmarked, local roads. This paper examines the early business of route guide publishing through the Official Automobile Blue Book series of guides. It focuses specifically on the expansion, contraction, and eventual decline of the Blue Book publishing empire and also the work of professional "pathfinders" that formed the company's data-gathering infrastructure. Be- ginning in 1901 with only one volume, the series steadily grew until 1920, when thirteen volumes were required to record thousands of routes throughout the country. Bankruptcy and corporate restructuring in 1921 forced the publishers to condense the guide into a four-volume set in 1922. Competition from emerging sheet maps, along with the nationwide standardization of highway numbers, pushed a switch to an atlas format in 1926. Blue Books, however, could not remain competitive and disappeared after 1937. "Pathfinders" were employed by the publishers and equipped with reliable automobiles. Soon they developed a shorthand notation system for recording field notes and efficiently incorporating them into the development workflow. Although pathfinders did not call themselves cartographers, they were geographical data field collectors and considered their work to be an "art and a science," much the same as modern-day cartographers. The paper concludes with some comments about the place of route guides in the history of American commercial cartography and draws some parallels between "pathfinders" and the digital road mappers of today.

Performance study of thermo-electric generator

Science.gov (United States)

Rohit, G.; Manaswini, D.; Kotebavi, Vinod; R, Nagaraja S.

2017-07-01

Devices like automobiles, stoves, ovens, boilers, kilns and heaters dissipate large amount of waste heat. Since most of this waste heat goes unused, the efficiency of these devices is drastically reduced. A lot of research is being conducted on the recovery of the waste heat, among which Thermoelectric Generators (TEG) is one of the popular method. TEG is a semiconductor device that produces electric potential difference when a thermal gradient develops on it. This paper deals with the study of performance of a TEG module for different hot surface temperatures. Performance characteristics used here are voltage, current and power developed by the TEG. One side of the TEG was kept on a hot plate where uniform heat flux was supplied to that. And the other side was cooled by supplying cold water. The results show that the output power increases significantly with increase in the temperature of the hot surface.

Improving collaboration between large and small-medium enterprises in automobile production

Science.gov (United States)

Sung, Soyoung; Kim, Yanghoon; Chang, Hangbae

2018-01-01

Inter-organisational collaboration is important for achieving qualitative and quantitative performance improvement in the global competitive environment. In particular, the extent of collaboration between the mother company and its suppliers is important for the profitability and sustainability of a company in the automobile industry, which is carried out using a customisation and order production system. As a result of the empirical analysis in this study, the collaborative information sharing cycle is shortened and the collaborative information sharing scope is widened. Therefore, the level of collaboration is improved by constructing an IT collaboration system.

Comparative Assessment of Blood Lead Levels of Automobile Technicians in Organised and Roadside Garages in Lagos, Nigeria

Directory of Open Access Journals (Sweden)

Abdulsalam Saliu

2015-01-01

Full Text Available Occupational exposure to lead is common among automobile technicians and constitutes 0.9% of total global health burden with a majority of cases in developing countries. The aim of this study was to determine and compare the blood lead levels of automobile technicians in roadside and organised garages in Lagos State, Nigeria. This was a comparative cross-sectional study. Data were collected using interviewer-administered questionnaires. Physical examinations were conducted and blood was analysed for lead using atomic spectrophotometery. Statistical analyses were performed to compare the median blood lead levels of each group using the independent sample (Mann-Whitney U test. Seventy-three (40.3% of the organised compared to 59 (34.3% of the roadside groups had high blood lead levels. The organised group had statistically significant higher median blood lead levels of, 66.0 µg/dL than the roadside 43.5 µg/dL (P < 0.05. There was also statistically significant association between high blood lead levels and abnormal discolouration of the mucosa of the mouth in the organised group. Automobile technicians in organised garages in Lagos have higher prevalence of elevated blood lead levels and higher median levels than the roadside group. Preventive strategies against lead exposures should be instituted by the employers and further actions should be taken to minimize exposures, improve work practices, implement engineering controls (e.g., proper ventilation, and ensure the use of personal protective equipment.

Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique: An Indian perspective

Directory of Open Access Journals (Sweden)

Sunil Luthra

2011-07-01

Full Text Available Purpose: Green Supply Chain Management (GSCM has received growing attention in the last few years. Most of the automobile industries are setting up their own manufacturing plants in competitive Indian market. Due to public awareness, economic, environmental or legislative reasons, the requirement of GSCM has increased.  In this context, this study aims to develop a structural model of the barriers to implement GSCM in Indian automobile industry.Design/methodology/approach: We have identified various barriers and contextual relationships among the identified barriers. Classification of barriers has been carried out based upon dependence and driving power with the help of MICMAC analysis. In addition to this, a structural model of barriers to implement GSCM in Indian automobile industry has also been put forward using Interpretive Structural Modeling (ISM technique. Findings: Eleven numbers of relevant barriers have been identified from literature and subsequent discussions with experts from academia and industry. Out of which, five numbers of barriers have been identified as dependent variables; three number of barriers have been identified as the driver variables and three number of barriers have been identified as the linkage variables. No barrier has been identified as autonomous variable. Four barriers have been identified as top level barriers and one bottom level barrier. Removal of these barriers has also been discussed.Research limitations/implications: A hypothetical model of these barriers has been developed based upon experts’ opinions. The conclusions so drawn may be further modified to apply in real situation problem. Practical implications: Clear understanding of these barriers will help organizations to prioritize better and manage their resources in an efficient and effective way.Originality/value: Through this paper we contribute to identify the barriers to implement GSCM in Indian automobile industry and to prioritize them

Automotive Manufacturers' Cost/Revenue, Financial and Risk Analysis : Projected Impact of Automobile Manufacturing on the Plastics Industry

Science.gov (United States)

1979-08-01

The report is part of a study to update the historical and projected cost/revenue analysis of the U.S. domestic automobile manufacturers. It includes the evaluation of the historical and projected financial data to assess the corporate financial posi...

"Desverticalização"/"terceirização" e as relações de subcontratação no complexo automobilístico brasileiro Vertical desintegration/outsourcing and the subcontracting relations in the Brazilian automobile industry

Directory of Open Access Journals (Sweden)

João Amato Neto

1994-04-01

Full Text Available O presente estudo tem por objetivo básico investigar, dentro do quadro de reestruturação da indústria mundial, quais são os principais fatores que têm motivado as grandes empresas a adotarem estratégias de "desintegração vertical", com a contrapartida de "terceirização" e "subcontratação" de pequenas empresas (fornecedoras de peças, componentes, etc.. Busca, ainda, entender este fenômeno a partir das estratégias da grande empresa industrial em busca de maior flexibilidade e tendo em vista o advento do novo paradigma de produção industrial, onde as relações inter-empresas sob a "filosofia" 'just-in-time' e de qualidade assegurada (qualidade total passam a ganhar maior relevância. Inicialmente são apresentados alguns aspectos dessa problemática a nível da indústria automobilística mundial para, posteriormente, analisar-se, a partir da pesquisa de campo, o caso do complexo automobilístico brasileiro.The aim of this study is to investigate, based on the context of the global industry restructuring, the main factors which have induced the process of vertical desintegration of the larger companies in the brazilian automobile industry. It involves the consequent increase of outsourcing process by the same companies. Thirteen case studies are presented (5 automakers and 8 autoparts companies with the purpose of identifying the tendency of these fenomena (vertical desintegration / outsourcing process within the brazilian automobile complex. These case studies provide some evidence which allow us to reach some conclusions, for instance: the relationship between the automakers and the autoparts companies belonging to the first step of the "subcontracting pyramid" has become less conflicting. But the relationship between the autoparts companies ("first step" and their suppliers (second, third,...steps is still based upon the "exit strategy", representing a lot of problems to both sides (e.g. : delay in delivers, high rate of low

Bildgebendes Multispektralsystem zur Serienfarbmessung an goniochromatischen Oberflächenbeschichtungen in der Automobil- und Zulieferindustrie

OpenAIRE

Jäger, Stefan

2006-01-01

In dieser Arbeit wird ein multispektrales bildgebendes System zur Farbmessung von Metall- und Perleffektlacken in einem industriellen Umfeld vorgestellt. Der Zweck des vorgeschlagenen Systems ist die Serienüberwachung und daraus folgend, die Steuerung von Lackierprozessen in der Automobil- und Zulieferindustrie, um das Qualitätsniveau anzuheben und Kosten zu reduzieren. Ausgehend von der Analyse der messtechnischen Anforderungen und den durch die Prozesstechnik gegebenen Randbedingungen wurde...

Características estruturais, relacionais e gerenciais na cadeia de suprimentos de um condomínio industrial na indústria automobilística

OpenAIRE

Pires,Sílvio Roberto Ignácio; Sacomano Neto,Mário

2010-01-01

Nas últimas décadas, a contribuição da indústria automobilística tem sido muito representativa em termos de inovações na gestão da cadeia de suprimentos, tais como aquelas contempladas nos modelos de consórcio modular e de condomínio industrial. Este artigo apresenta os resultados de uma pesquisa envolvendo diferentes configurações na estrutura de relacionamento entre uma montadora de automóveis e alguns de seus fornecedores, em uma cadeia de suprimentos da indústria automobilística que utili...

Visions for the car of the future; Visionen fuer das Automobil der Zukunft

Energy Technology Data Exchange (ETDEWEB)

Leschke, H. [DaimlerChrysler AG, Sindelfingen (Germany)

2000-07-01

The car is 115 years old. Where is it heading on its journey through time which has - up until now - been more evolutionary than revolutionary? The criterion will be to achieve advantages for our customers, and we must channel all our efforts into doing so. 'Emotional' - and therefore 'irrational' feelings - stand in opposition to this rational criterion. A car must please, otherwise it simply will not sell. And let us not forget the 'brand-specific' aspect of car design, which is perceived in a very emotional way. Our profession - and therefore our professionalism too - must see to it that the laws of aesthetics remain on a comprehensible scale, but must develop further from the point of view of different cultures, their development thus far and a general global rapprochement. Design is allowed to provoke, to intrigue our customers; it must arouse emotions. Both emotion and provocation lead to polarity. On balance: there will be something for everyone, a variety of different concepts and designs as a way of portraying one's own individuality in a motoring medley. The basic prerequisite: we should still find driving a car fun - even in the year 2000. (orig.) [German] Das Automobil ist 115 Jahre alt. Wohin geht seine bisherige, eher evolutionaere als revolutionaere Reise? Kundennutzen wird das Kriterium sein, dem sich all unser Tun stellen muss. Diesem rationalen Kriterium steht das 'Emotionale' und damit eher 'Irrationale' gegenueber. Ein Automobil muss gefallen, sonst wird es nicht gekauft. Vergessen wir nicht das sehr emotional wahrgenommene 'Markenspezifische' Automobil-Design. Unsere Profession, und damit auch unsere Professionalitaet, muessen Sorge tragen, dass die Gesetze der Aesthetik in einem nachvollziehbaren Rahmen bleiben, sich aber unter dem Aspekt der unterschiedlichen Kulturen, deren bisheriger Entwicklung und weltweiten Annaeherung weiterentwickeln muessen. Design darf provozieren

Parking infrastructure: energy, emissions, and automobile life-cycle environmental accounting

Energy Technology Data Exchange (ETDEWEB)

Chester, Mikhail; Horvath, Arpad; Madanat, Samer, E-mail: mchester@cal.berkeley.edu, E-mail: horvath@ce.berkeley.edu, E-mail: madanat@ce.berkeley.edu [Department of Civil and Environmental Engineering, University of California, Berkeley, Berkeley CA 94720 (United States)

2010-07-15

The US parking infrastructure is vast and little is known about its scale and environmental impacts. The few parking space inventories that exist are typically regionalized and no known environmental assessment has been performed to determine the energy and emissions from providing this infrastructure. A better understanding of the scale of US parking is necessary to properly value the total costs of automobile travel. Energy and emissions from constructing and maintaining the parking infrastructure should be considered when assessing the total human health and environmental impacts of vehicle travel. We develop five parking space inventory scenarios and from these estimate the range of infrastructure provided in the US to be between 105 million and 2 billion spaces. Using these estimates, a life-cycle environmental inventory is performed to capture the energy consumption and emissions of greenhouse gases, CO, SO{sub 2}, NO{sub X}, VOC (volatile organic compounds), and PM{sub 10} (PM: particulate matter) from raw material extraction, transport, asphalt and concrete production, and placement (including direct, indirect, and supply chain processes) of space construction and maintenance. The environmental assessment is then evaluated within the life-cycle performance of sedans, SUVs (sports utility vehicles), and pickups. Depending on the scenario and vehicle type, the inclusion of parking within the overall life-cycle inventory increases energy consumption from 3.1 to 4.8 MJ by 0.1-0.3 MJ and greenhouse gas emissions from 230 to 380 g CO{sub 2}e by 6-23 g CO{sub 2}e per passenger kilometer traveled. Life-cycle automobile SO{sub 2} and PM{sub 10} emissions show some of the largest increases, by as much as 24% and 89% from the baseline inventory. The environmental consequences of providing the parking spaces are discussed as well as the uncertainty in allocating paved area between parking and roadways.

FY2007 Oak Ridge National Laboratory Annual Progress Report for the Power Electronics and Electric Machinery Program

Energy Technology Data Exchange (ETDEWEB)

Olszewski, Mitchell [ORNL

2007-10-01

The U.S. Department of Energy (DOE) and the U.S. Council for Automotive Research (composed of automakers Ford, General Motors, and Chrysler) announced in January 2002 a new cooperative research effort. Known as 'FreedomCAR' (derived from 'Freedom' and 'Cooperative Automotive Research'), it represents DOE's commitment to developing public/private partnerships to fund high-risk, high-payoff research into advanced automotive technologies. Efficient fuel cell technology, which uses hydrogen to power automobiles without air pollution, is a very promising pathway to achieving the ultimate vision. The new partnership replaces and builds upon the Partnership for a New Generation of Vehicles initiative that ran from 1993 through 2001. The Advanced Power Electronics and Electric Machines (APEEM) subprogram within the FreedomCAR and Vehicle Technologies Program provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on understanding and improving the way the various new components of tomorrow's automobiles will function as a unified system to improve fuel efficiency. In supporting the development of hybrid propulsion systems, the APEEM effort has enabled the development of technologies that will significantly improve advanced vehicle efficiency, costs, and fuel economy. The APEEM subprogram supports the efforts of the FreedomCAR and Fuel Partnership through a three-phase approach intended to: (1) identify overall propulsion and vehicle-related needs by analyzing programmatic goals and reviewing industry's recommendations and requirements and then develop the appropriate technical targets for systems, subsystems, and component research and development activities; (2) develop and validate individual subsystems and components, including electric motors and power electronics; and (3) determine how well the components and subsystems work together in a vehicle environment or

A Hybrid Maximum Power Point Tracking Method for Automobile Exhaust Thermoelectric Generator

Science.gov (United States)

Quan, Rui; Zhou, Wei; Yang, Guangyou; Quan, Shuhai

2017-05-01

To make full use of the maximum output power of automobile exhaust thermoelectric generator (AETEG) based on Bi2Te3 thermoelectric modules (TEMs), taking into account the advantages and disadvantages of existing maximum power point tracking methods, and according to the output characteristics of TEMs, a hybrid maximum power point tracking method combining perturb and observe (P&O) algorithm, quadratic interpolation and constant voltage tracking method was put forward in this paper. Firstly, it searched the maximum power point with P&O algorithms and a quadratic interpolation method, then, it forced the AETEG to work at its maximum power point with constant voltage tracking. A synchronous buck converter and controller were implemented in the electric bus of the AETEG applied in a military sports utility vehicle, and the whole system was modeled and simulated with a MATLAB/Simulink environment. Simulation results demonstrate that the maximum output power of the AETEG based on the proposed hybrid method is increased by about 3.0% and 3.7% compared with that using only the P&O algorithm and the quadratic interpolation method, respectively. The shorter tracking time is only 1.4 s, which is reduced by half compared with that of the P&O algorithm and quadratic interpolation method, respectively. The experimental results demonstrate that the tracked maximum power is approximately equal to the real value using the proposed hybrid method,and it can preferentially deal with the voltage fluctuation of the AETEG with only P&O algorithm, and resolve the issue that its working point can barely be adjusted only with constant voltage tracking when the operation conditions change.

The Role of Technical Innovation and Sustainability on Energy Consumption: A Case Study on the Taiwanese Automobile Industry

Directory of Open Access Journals (Sweden)

Chao-Wu Chou

2015-06-01

Full Text Available The impact of global warming and climate change is one of the most critical challenges of the 21st century. The greenhouse effect caused by technological development and industrial pollution has accelerated the speed of global warming. The continuous improvement in automobile energy consumption is one of the most effective ways to reduce global warming. A comparative analysis is proposed to examine the various automobiles that utilize technological innovation to improve their energy consumption. Their contribution to CO2 emissions is then investigated. This study focuses on technical innovation and output power of a conventional engine. The results indicate that innovative engines (such as the Ford turbo petrol/diesel engine, the EcoBoost/TDCi have improved energy consumption and reduce CO2 emissions. In addition, the Toyota hybrid vehicles have also improved energy consumption and reduced greenhouse gases emissions.

Tungsten carbide and tungsten-molybdenum carbides as automobile exhaust catalysts

International Nuclear Information System (INIS)

Leclercq, L.; Daubrege, F.; Gengembre, L.; Leclercq, G.; Prigent, M.

1987-01-01

Several catalyst samples of tungsten carbide and W, Mo mixed carbides with different Mo/W atom ratios, have been prepared to test their ability to remove carbon monoxide, nitric oxide and propane from a synthetic exhaust gas simulating automobile emissions. Surface characterization of the catalysts has been performed by X-ray photoelectron spectroscopy (XPS) and selective chemisorption of hydrogen and carbon monoxide. Tungsten carbide exhibits good activity for CO and NO conversion, compared to a standard three-way catalyst based on Pt and Rh. However, this W carbide is ineffective in the oxidation of propane. The Mo,W mixed carbides are markedly different having only a very low activity. 9 refs.; 10 figs.; 5 tabs

Aptitude visuelle à la conduite automobile: exemple des candidats au permis de conduire à Libreville

Science.gov (United States)

Souhail, Hassane; Assoumou, Prudence; Birinda, Hilda; Mengome, Emmanuel Mve

2015-01-01

L'objectif était d’évaluer l'aptitude visuelle à la conduite automobile des candidats au permis de conduire à Libreville. Il s'agissait d'une étude transversale, descriptive et analytique, qui s'est déroulée à Libreville pendant la période du 4 avril 2012 au 14 juillet 2012 (soit 4 mois et 10 jours). La population d’étude concernait les candidats soumis aux épreuves d'obtention du permis de conduire. Nous avons inclus dans notre travail, les candidats, ayant donné leur consentement par écrit et exclus ceux refusant d'adhérer à l'enquête. Les variables étudiées concernaient l’âge, le sexe, la population d’étude, l'activité professionnelle, l'acuité visuelle de loin et de près, la vision des couleurs, la catégorie du permis de conduire, et l'aptitude visuelle à la conduite automobile. La saisie et l'analyse des données ont été collectées au moyen d'une fiche d'enquête standardisée; après vérification et validation, elles ont été saisies sur le logiciel Excel Windows et analysées sur le logiciel Epi Info version 3.5.1. L’âge moyen des 406 candidats était de 29 ans ± 6,65 ans avec des extrêmes allant de 17 ans à 52 ans. Les hommes représentaient 283 (69,7%) et les femmes 123 (30,3%), soit un ratio de 2,3. Les fonctionnaires étaient retrouvés dans 39,4 % des cas, suivi des élèves-étudiants dans 33,5%. Dans notre population d’étude, 71 sur 406 candidats avaient une baisse de l'acuité visuelle de loin, soit 17,5%. Dans notre série, nous avons retrouvés 34 candidats âgés de 40 ans et plus, et seulement 14 candidats (41,2%) avaient une baisse de l'acuité visuelle de près. La quasi-totalité des patients avaient une vision de couleurs normale (99,5%), cependant 2 candidats avaient une vision de couleurs anormale, soit une prévalence de 0,5%. Dans notre échantillon, 403 (99,3%) sollicitaient un permis de conduire de catégorie léger (perms A, A1, B, F) et 3 (0,7%) sollicitaient un permis de conduire de type

Supply Chain Management in The Brazilian Automobile Industry: Bottlenecks for Steadier Growth

Directory of Open Access Journals (Sweden)

W. F. Sorte Junior

2011-06-01

Full Text Available Taking the Lean Production System as the reference model, this paper analyses the supply chain management approach and the relationship between private and public sectors in the Brazilian automobile industry. Through a case study conducted from October 2006 to October 2008 in a private owned automaker, two bottlenecks in this Brazilian industrial sector are identified: (1 Emphasis on coordination rather than integration in supply chain management; and (2 Insufficient channels of communication between private and public sectors, resulting in inefficient policies to nurture automakers with low production volume.

Supplier selection in automobile industry: A mixed balanced scorecard–fuzzy AHP approa

Directory of Open Access Journals (Sweden)

Masoud Rahiminezhad Galankashi

2016-03-01

Full Text Available This study proposed an integrated Balanced Scorecard–Fuzzy Analytic Hierarchical Process (BSC–FAHP model to select suppliers in the automotive industry. In spite of the vast amount of studies on supplier selection, the evaluation and selection of suppliers using the specific measures of the automotive industry are less investigated. In order to fill this gap, this research proposed a new BSC for supplier selection of automobile industry. Measures were gathered using a literature survey and accredited using Nominal Group Technique (NGT. Finally, a fuzzy AHP was used to select the best supplier.

Lithium-Ion Battery Management System: A Lifecycle Evaluation Model for the Use in the Development of Electric Vehicles

Directory of Open Access Journals (Sweden)

Sisodia Ayush

2018-01-01

Full Text Available The use of Lithium-ion batteries in the automobile sector has expanded drastically in the recent years. The foreseen increment of lithium to power electric and hybrid electric vehicles has provoked specialists to analyze the long term credibility of lithium as a transportation asset. To give a better picture of future accessibility, this paper exhibits a life cycle model for the key procedures and materials associated with the electric vehicle lithium-ion battery life cycle, on a worldwide scale. This model tracks the flow of lithium and energy sources from extraction, to generation, to on road utilization, and the role of reusing and scrapping. This life cycle evaluation model is the initial phase in building up an examination model for the lithium ion battery production that would enable the policymakers to survey the future importance of lithium battery recycling, and when in time setting up a reusing foundation be made necessary.

The automobile of the future - an electromobile?; Das Automobil der Zukunft - ein Elektroauto?

Energy Technology Data Exchange (ETDEWEB)

Frondel, Manuel; Peistrup, Matthias [Rheinisch-Westfaelisches Inst. fuer Wirtschaftsforschung, Essen (Germany)

2009-08-15

Electric drives are currently regarded as one of the most promising vehicle concepts of the future, and their development is being fostered in both the economic and the political realm. In the long run improved efficiency and a reduction in the CO{sub 2} emissions of electricity generation will make electromobiles an attractive option from the viewpoint of climate protection. Nevertheless the chances for a breakthrough of electromobility in the next few years appear somewhat uncertain, as a comparative review of several recent studies shows.

40 CFR 600.502-81 - Definitions.

Science.gov (United States)

2010-07-01

... 1978 Passenger Automobiles and for 1979 and Later Model Year Automobiles (Light Trucks and Passenger... economy value means a number which represents the average number of miles traveled by an electric vehicle...

The choice of leasing companies for automobile fleet updating on the basis of hierarchies analysis method

OpenAIRE

Dorohov, А.

2007-01-01

The basic criteria of leasing companies choice by the transport enterprises for automobile fleet updating such as terms of financing, size of advance, assortment time of existence at the market, have been determined. The determination of the best leasing company according to these parameters on the basis of hierarchies analysis method has been offered.

Role of Multinational Corporations in Automobile Industries: A Comparative Study Between India and Mexico

Directory of Open Access Journals (Sweden)

Ganesh Babu Kumaran

2008-10-01

Full Text Available Role of Multinational Corporations ( MNC’s in developing countries is not new in the arena of International business and global macroeconomics. One of the most significant economic developments of recent decades is the economic LPG process (Liberalisation, Privatisation and Globalisation is reflected in the rapid growth in international trade and the surge in Foreign Direct Investment (FDI. This process is to a large extent driven by new investments from multinational corporations. A rapidly growing share of MNC’s in India and Mexico in last decade was evident in various sector and in particular to automobile sector. Multinational Corporations are seeking to exploit the vast but also precarious market potentials in these emerging economies. Simultaneously, India and Mexico are increasingly embarking on economic development strategies aimed at attracting MNC’s Foreign Direct Investment as a means to access technology, capital, organizational and marketing know how, etc. This study does comparative analyses on the performance of automobile sector in India and Mexico, mainly in passenger car and Utility vehicles sector. It examines the impact and the role of MNC’s in these economies since 1990’s, with derived empirical quantitative and qualitative data analysis that would illustrate and reinforce some of the contemporary status.

REGIONALIZATION AND INTRA-INDUSTRY TRADE. AN ANALYSIS OF AUTOMOBILE INDUSTRY TRADE IN NAFTA

OpenAIRE

Sylvie MONTOUT; Jean-Louis MUCCHIELLI; Soledad ZIGNAGO

2002-01-01

As was shown in some previous studies, the creation of the North American Free Trade American (NAFTA) has significantly increased trade and investment flows between member countries. Consequently, it seems appropriate to analyze the incidences of the free trade agreement on the nature of trade. In this paper, we study the intra-industry trade in the automobile industry within the NAFTA area. Our results highlight an increase in intra-industry trade since the beginning of the 1990s. The import...

Research on the Intelligent Control and Simulation of Automobile Cruise System Based on Fuzzy System

Directory of Open Access Journals (Sweden)

Xue-wen Chen

2016-01-01

Full Text Available In order to improve the active safety driving vehicle and alleviate the intension of driving fatigue, an intelligent control strategy of automobile cruise is put forward based on the throttle or braking pedal combined control adopting the fuzzy control theory. A fuzzy logic controller is presented, which consists of the two input variables, the deviation of the theoretical safe distance and relative distance and the relative velocity between the preceding vehicle and the cruise vehicle, and the single output variable, that is, the throttle opening or the braking pedal travel. Taking the test data of 1.6 L vehicle with auto-transmission as an example, the function on the intelligent cruise control system is simulated adopting MATLAB/Simulink aiming at different working conditions on the city road. The simulation results show that the control strategy possesses integrated capability of automated Stop & Go control, actively following the preceding vehicle on the conditions of keeping the safety distance and the constant velocity cruise. The research results can offer the theory and technology reference for setting dSPACE type and developing the integrated control product of automobile cruise system.

Opportunities for PEM fuel cell commercialization : fuel cell electric vehicle demonstration in Shanghai

Energy Technology Data Exchange (ETDEWEB)

Ma, Z.F. [Shanghai Jiao Tong Univ., Shanghai (China). Dept. of Chemical Engineering

2006-07-01

The research and development activities devoted to the development of the proton exchange membrane fuel cell (PEMFC) were discussed with reference to its application in the fuel cell electric vehicle (FCEV). In the past decade, PEMFC technology has been successfully applied in both the automobile and residential sector worldwide. In China, more than one billion RMB yuan has been granted by the Chinese government to develop PEM fuel cell technology over the past 5 years, particularly for commercialization of the fuel cell electric vehicle (FCEV). The City of Shanghai has played a significant role in the FCEV demonstration with involvement by Shanghai Auto Industrial Company (SAIC), Tongji University, Shanghai Jiaotong University, and Shanghai Shenli High Tech Co. Ltd. These participants were involved in the development and integration of the following components into the FCEV: fuel cell engines, batteries, FCEV electric control systems, and primary materials for the fuel cell stack. During the course of the next five year-plan (2006-2010), Shanghai will promote the commercialization of FCEV. More than one thousand FCEVs will be manufactured and an FCEV fleet will be in operation throughout Shanghai City by 2010.

Manganese concentrations in the air of the Montreal (Canada) subway in relation to surface automobile traffic density

Energy Technology Data Exchange (ETDEWEB)

Boudia, Nacera; Gareau, Lise; Zayed, Joseph [GRIS Interdisciplinary Health Research Group, University of Montreal (Canada); Halley, Renee [Transport Montreal Society (Canada); Kennedy, Greg [Department of Engineering Physics, Ecole Polytechnique de Montreal, Montreal (Canada); Lambert, Jean [Department of Social and Preventive Medicine, Faculty of Medicine, University of Montreal (Canada)

2006-07-31

Methylcyclopentadienyl manganese tricarbonyl (MMT) is an organic derivative of manganese (Mn), used since 1976 in Canadian gasoline as an octane enhancer. Its combustion leads to the emission of Mn particles. Several studies carried out by our research group have established a correlation between atmospheric Mn concentrations and automobile traffic density, suggesting that MMT in gasoline could play a significant role. This study aims to measure Mn concentrations in the air of the underground subway in Montreal (Canada) and to examine the relation with nearby surface automobile traffic density and, by extension, with the use of MMT in gasoline. Three subway stations were chosen for their location in different microenvironments with different traffic densities. Respirable (MnR<5 {mu}m) and total Mn (MnT) were sampled over two weeks, 5 days/week, 12 h/day. For the station located in the lower traffic density area, relatively low levels of MnR and MnT were found, with averages of 0.018 and 0.032 {mu}g/m{sup 3}, respectively. These concentrations are within the range of the background levels in Montreal. For the other two stations, the average concentrations of MnR were twice as high and exceeded the US EPA reference concentration of 0.05 {mu}g/m{sup 3}. Although there may be several sources of Mn from different components of the subway structure and vehicles, no correlation was found between subway traffic and atmospheric Mn in the subway. Since the air in the underground subway is pumped directly from outside without filtration, our findings strongly suggest that the combustion of MMT in automobiles is an important factor. (author)

Cross-Border Labor Organizing in the Garment and Automobile Industries: The Phillips Van-Heusen and Ford Cuautitlan Cases

Directory of Open Access Journals (Sweden)

Ralph Armbruster

2015-08-01

Full Text Available The globalization of the world economy has created new opportunities for cross-border labor organizing. In this paper I examine two case studies of cross -border labor organizing. One case involves Phillips Van-Hernen (PVH workers in Guatemala City, and the other Ford automobile workers in Cuautitlan, Mexico. The PVH case illustrates the potential for cross-border labor organizing in the highly mobile garment industry. The PVH workers' union and their cross-border allies adopted a "strategic cross-border organizing model" that included consumer and trade pressure, an active international trade secretariat, and several other strategies, to achieve an amazing victory. However, the Ford Cuautitlan case demonstrates that corporatist state-labor relations and internal union conflicts have limited cross-border organizing in the automobile industry. These two case studies and their different outcomes have many important lessons for academics and activists interested in cross-border labor organizing.

FY2010 Oak Ridge National Laboratory Annual Progress Report for the Power Electronics and Electric Machinery Program

Energy Technology Data Exchange (ETDEWEB)

Olszewski, Mitchell [ORNL

2010-10-01

The U.S. Department of Energy (DOE) and the U.S. Council for Automotive Research (composed of automakers Ford, General Motors, and Chrysler) announced in January 2002 a new cooperative research effort. Known as FreedomCAR (derived from ''Freedom'' and ''Cooperative Automotive Research''), it represents DOE's commitment to developing public-private partnerships to fund high risk, high payoff research into advanced automotive technologies. Efficient fuel cell technology, which uses hydrogen to power automobiles without air pollution, is a very promising pathway to achieve the ultimate vision. The new partnership replaces and builds upon the Partnership for a New Generation of Vehicles initiative that ran from 1993 through 2001. The Oak Ridge National Laboratory's (ORNL's) Advanced Power Electronics and Electric Machines (APEEM) subprogram within the DOE Vehicle Technologies Program (VTP) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE) and electric motor technologies that will leapfrog current on-the-road technologies. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow's automobiles will function as a unified system to improve fuel efficiency. In supporting the development of advanced vehicle propulsion systems, the APEEM subprogram has enabled the development of technologies that will significantly improve efficiency, costs, and fuel economy. The APEEM subprogram supports the efforts of the FreedomCAR and Fuel Partnership through a three phase approach intended to: (1) identify overall propulsion and vehicle related needs by analyzing programmatic goals and reviewing industry's recommendations and requirements and then develop the appropriate technical targets for systems

Can the periphery achieve core? The case of the automobile components industry in Spain

OpenAIRE

Lampón, Jesús F.; Lago-Peñas, Santiago; Cabanelas, Pablo

2013-01-01

The paper analyses changes experienced by Spain, as a European Peripheral region, in the spatial concentration of value-added and high-skill activities, and generation of technology in the automobile components industry. The analysis of plants set up (investments) and relocated (divestments) by multinationals (MNEs) between 2001 and 2010 show that Spain is no longer a place for labour-intensive activities and standardized processes using simple technologies in comparison to other peripheral r...

Who is exposed to gas prices? How gasoline prices affect automobile manufacturers and dealerships

OpenAIRE

Silva-Risso, Jorge; Zettelmeyer, Florian; Busse, Meghan R.; Knittel, Christopher Roland

2016-01-01

Many consumers are keenly aware of gasoline prices, and consumer responses to gasoline prices have been well studied. In this paper, by contrast, we investigate how gasoline prices affect the automobile industry: manufacturers and dealerships. We estimate how changes in gasoline prices affect equilibrium prices and sales of both new and used vehicles of different fuel economies. We investigate the implications of these effects for individual auto manufacturers, taking into account differences...

Who is exposed to gas prices? How gasoline prices affect automobile manufacturers and dealerships

OpenAIRE

Busse, Meghan R.; Kittel, Christopher R.; Zettelmeyer, Florian

2012-01-01

Many consumers are keenly aware of gasoline prices, and consumer responses to gasoline prices have been well studied. In this paper, by contrast, we investigate how gasoline prices affect the automobile industry: manufacturers and dealerships. We estimate how changes in gasoline prices affect equilibrium prices and sales of both new and used vehicles of different fuel economies. We investigate the implications of these effects for individual auto manufacturers, taking into account differences...

Imitating model of the electronic regulator frequencies of rotation of the automobile diesel engine

OpenAIRE

Тырловой, С. И.

2011-01-01

The imitating model of an frequency electronic regulator of rotation of high-speed diesel engine an automobile diesel engine with the distributive fuel pump of Bosch company is resulted. Is executed simulation transitive modes of a diesel engine with mechanic and electronic regulators. Deterioration influence plungers steams on dinamic and economic indicators of a diesel engine is analysed. Operational indicators of a diesel engine with mechanic and electronic regulators are compared. The obt...

Environmental compatibility of automobiles - instruments for the BMW product development process; Automobil-Umweltvertraeglichkeit - neue Instrumente im BMW-Produktentwicklungsprozess

Energy Technology Data Exchange (ETDEWEB)

Franze, H.A.; Neumann, U.; Vornberger, K.; Hoock, R.; Hemberger, R.

1995-09-01

The environmental impact of the automobile and its components is of growing importance not only in public debates but also in the complex decision making process regarding future car concepts. To calculate the environmental compatibility of car components BMW had developed various quantifying instruments and a holistic Life-Cycle Analysis (LCA) approach. The development phase significantly affects the entire life-cycle of a product. Suitable design criteria, recycling requirements and in-house standards have therefore been developed and established. They enable the designer to handle the more and more complex conflicts of technical, economic and ecological objectives during the development process with special view to the customer, i.e. the market. (orig.) [Deutsch] Zur nachhaltigen Verbesserung der Umweltvertraeglichkeit von Automobilen und Bauteilen hat BMW quantitative Instrumente entwickelt: Den `Anforderungskatalog Gesamtfahrzeug`, die BMW-Recycling-Norm, die Demontageanalyse von Automobilen und die lebenszyklusbezogene Bauteil-Bilanzierung. Sie sollen es dem Konstrukteur in der Entwicklungsphase praxisgerecht ermoeglichen, verschiedene Bauteilvarianten oekologisch zu bewerten. Nur so koennen die weiter zunehmenden komplexen Zielkonflike in der Automobilentwicklung, die sowohl technisch-wirtschaftlicher als auch oekonomisch-oekologischer und teilweise gesellschaftspolitischer Natur sind, in Zukunft beherrscht und damit den Markt- und Kundenanforderungen gerecht werden. (orig.)

Innovative design method of automobile profile based on Fourier descriptor

Science.gov (United States)

Gao, Shuyong; Fu, Chaoxing; Xia, Fan; Shen, Wei

2017-10-01

Aiming at the innovation of the contours of automobile side, this paper presents an innovative design method of vehicle side profile based on Fourier descriptor. The design flow of this design method is: pre-processing, coordinate extraction, standardization, discrete Fourier transform, simplified Fourier descriptor, exchange descriptor innovation, inverse Fourier transform to get the outline of innovative design. Innovative concepts of the innovative methods of gene exchange among species and the innovative methods of gene exchange among different species are presented, and the contours of the innovative design are obtained separately. A three-dimensional model of a car is obtained by referring to the profile curve which is obtained by exchanging xenogeneic genes. The feasibility of the method proposed in this paper is verified by various aspects.

A Low-Cost Data Acquisition System for Automobile Dynamics Applications.

Science.gov (United States)

González, Alejandro; Olazagoitia, José Luis; Vinolas, Jordi

2018-01-27

This project addresses the need for the implementation of low-cost acquisition technology in the field of vehicle engineering: the design, development, manufacture, and verification of a low-cost Arduino-based data acquisition platform to be used in <80 Hz data acquisition in vehicle dynamics, using low-cost accelerometers. In addition to this, a comparative study is carried out of professional vibration acquisition technologies and low-cost systems, obtaining optimum results for low- and medium-frequency operations with an error of 2.19% on road tests. It is therefore concluded that these technologies are applicable to the automobile industry, thereby allowing the project costs to be reduced and thus facilitating access to this kind of research that requires limited resources.

An empirical and model study on automobile market in Taiwan

Science.gov (United States)

Tang, Ji-Ying; Qiu, Rong; Zhou, Yueping; He, Da-Ren

2006-03-01

We have done an empirical investigation on automobile market in Taiwan including the development of the possession rate of the companies in the market from 1979 to 2003, the development of the largest possession rate, and so on. A dynamic model for describing the competition between the companies is suggested based on the empirical study. In the model each company is given a long-term competition factor (such as technology, capital and scale) and a short-term competition factor (such as management, service and advertisement). Then the companies play games in order to obtain more possession rate in the market under certain rules. Numerical simulation based on the model display a competition developing process, which qualitatively and quantitatively agree with our empirical investigation results.

From Rail-Oriented to Automobile-Oriented Urban Development and Back. 100 Years of Paradigm Change and Transport Policy in Berlin

Directory of Open Access Journals (Sweden)

Friedemann Kunst

2016-10-01

Full Text Available Transport and its side effects are major problems in rapidly growing cities. Car traffic dominates these cities and pollutes the environment without being able to sufficiently secure the mobility of the urban population and goods. A paradigm shift in urban and transport policy will be necessary to change this situation. In spite of its different development dynamics, Berlin is an interesting example to discuss development strategies for rapidly growing cities because in the course of more than 100 years, a twofold paradigm shift has occurred in the city both conceptually and practically:  Berlin has shifted from a city dominated by rail traffic  to an automobile-oriented city,  and has then gradually transformed back into a city in which  an intertwined system of public and non-motorized individual means of transport secures the mobility of the urban population. The interdependencies on the conceptual level between urban planning and transport policies as well as on a practical level between urban structures and transport systems can be studied using the example of Berlin. Experiences with the implementation of automobile-oriented planning and the special conditions in the first decade after reunification led to protests, reflection, and a revision of the transport policy. A strategically designed process of integrated planning has brought about a trend reversal, and steered the development of transport in the direction of clearly formulated sustainability-oriented objectives. In this process, the reintegration of transport and spatial planning and a reorganization of institutional structures at the administrative level was of particular importance. Compact, rail-oriented settlement structures like in the metropolitan region of Berlin make it easier to dispense with automobiles than sprawled structures. The residual role that qualitatively improved automobiles will take in the cities of the future will have to be determined by research and

The Historical Evolution and Current Interpretation of the Definition of Essence of the Category of «Competitiveness of Enterprise of the Automobile Industry»

Directory of Open Access Journals (Sweden)

Shevchenko Inna Yu.

2018-01-01

Full Text Available The article is aimed at researching the historical evolution and a current interpretation of the definition of essence of the category of «competitiveness of enterprise of the automobile industry». Using the monographic analysis, the article reviews the historical evolution of the definition of essence of the category of «competitiveness of enterprise» in the national scientific literature in the period from 2007 to 2016. It has been concluded that the essence of the concept of «competitiveness of enterprise» is actually reduced to the competitiveness of products or operational efficiency. The author’s own definition of the essence of the category of «competitiveness of enterprise of the automobile industry» has been suggested: it has been specified that under the given term be understood «...the dynamic ability of enterprise of the automobile industry to ensure the efficiency of all activities as result of interaction of the internal competitive potential and the external competitive environment factors in accordance with the chosen competitive strategy at a certain stage of the life cycle».

Regenerative Intelligent Brake Control for Electric Motorcycles

Directory of Open Access Journals (Sweden)

Juan Jesús Castillo Aguilar

2017-10-01

Full Text Available Vehicle models whose propulsion system is based on electric motors are increasing in number within the automobile industry. They will soon become a reliable alternative to vehicles with conventional propulsion systems. The main advantages of this type of vehicles are the non-emission of polluting gases and noise and the effectiveness of electric motors compared to combustion engines. Some of the disadvantages that electric vehicle manufacturers still have to solve are their low autonomy due to inefficient energy storage systems, vehicle cost, which is still too high, and reducing the recharging time. Current regenerative systems in motorcycles are designed with a low fixed maximum regeneration rate in order not to cause the rear wheel to slip when braking with the regenerative brake no matter what the road condition is. These types of systems do not make use of all the available regeneration power, since more importance is placed on safety when braking. An optimized regenerative braking strategy for two-wheeled vehicles is described is this work. This system is designed to recover the maximum energy in braking processes while maintaining the vehicle’s stability. In order to develop the previously described regenerative control, tyre forces, vehicle speed and road adhesion are obtained by means of an estimation algorithm. A based-on-fuzzy-logic algorithm is programmed to carry out an optimized control with this information. This system recuperates maximum braking power without compromising the rear wheel slip and safety. Simulations show that the system optimizes energy regeneration on every surface compared to a constant regeneration strategy.

Alternative Antriebe für Automobile: Hybridsysteme, Brennstoffzellen, alternative Energieträger

Science.gov (United States)

Stan, Cornel

Über die Realisierungsmöglichkeiten zukünftiger Antriebskonzepte - von Hybridsystemen Elektro-/Verbrennungsmotor über Brennstoffzellen bis zu alternativen Energieträgern wie Wasserstoff oder Alkohol - werden fundierte Kriterien der Qualität eines Antriebs entscheiden. Leistungsdichte, Drehmomentverlauf, Beschleunigungscharakteristik, spezifischer Energieverbrauch sowie Emission chemischer Stoffe und Geräusche sind dafür wichtige Merkmale zur Qualitätsbeurteilung. Die Verfügbarkeit und die Speicherfähigkeit vorgesehener Energieträger, die technische Komplexität, Kosten, Sicherheit, Infrastruktur und Service werden die Randbedingungen für die Einführung realisierbarer Konzepte alternativer Antriebe für Automobile stellen.

The Intergenerational Transmission of Automobile Brand Preferences: Empirical Evidence and Implications for Firm Strategy

OpenAIRE

Soren T. Anderson; Ryan Kellogg; Ashley Langer; James M. Sallee

2013-01-01

We document a strong correlation in the brand of automobile chosen by parents and their adult children, using data from the Panel Study of Income Dynamics. This correlation could represent transmission of brand preferences across generations, or it could result from correlation in family characteristics that determine brand choice. We present a variety of empirical specifications that lend support to the former interpretation and to a mechanism that relies at least in part on state dependence...

Trees in urban street canyons and their impact on the dispersion of automobile exhausts

OpenAIRE

Gromke, Christof; Ruck, Bodo

2007-01-01

The aim of the present study is to clarify the influence of trees on the dispersion of automobile exhausts in urban street canyons. For this purpose, measurements have been performed with a small scale wind tunnel model of an idealized, isolated street canyon with model trees placed along the canyon center axis. Sulfur hexafluoride (SF6) was released from a line source embedded in the street surface, simulating vehicle exhaust emissions. The influence of various tree planting arrangements on ...

Oak Ridge National Laboratory Annual Progress Report for the Power Electronics and Electric Machinery Program

Energy Technology Data Exchange (ETDEWEB)

Olszewski, M.

2006-10-31

technical targets for systems, subsystems, and component research and development activities; (2) Develop and validate individual subsystems and components, including electric motors, emission control devices, battery systems, power electronics, accessories, and devices to reduce parasitic losses; and (3) Determine how well the components and subsystems work together in a vehicle environment or as a complete propulsion system and whether the efficiency and performance targets at the vehicle level have been achieved. The research performed under the Vehicle Systems subprogram will help remove technical and cost barriers to enable the development of technology for use in such advanced vehicles as hybrid and fuel-cell-powered automobiles that meet the goals of the FreedomCAR Program. A key element in making hybrid electric vehicles practical is providing an affordable electric traction drive system. This will require attaining weight, volume, and cost targets for the power electronics and electrical machines subsystems of the traction drive system. Areas of development include these: (1) Novel traction motor designs that result in increased power density and lower cost; (2) Inverter technologies involving new topologies to achieve higher efficiency and the ability to accommodate higher-temperature environments; (3) Converter concepts that employ means of reducing the component count and integrating functionality to decrease size, weight, and cost; (4) More effective thermal control and packaging technologies; and (5) Integrated motor/inverter concepts. The Oak Ridge National Laboratory's (ORNL's) Power Electronics and Electric Machinery Research Center conducts fundamental research, evaluates hardware, and assists in the technical direction of the DOE Office of FreedomCAR and Vehicle Technologies Program, Power Electronics and Electric Machinery Program. In this role, ORNL serves on the FreedomCAR Electrical and Electronics Technical Team, evaluates proposals for DOE

Advances and trends of head-up and head-down display systems in automobiles

Science.gov (United States)

Betancur, J. Alejandro; Osorio-Gomez, Gilberto; Agudelo, J. David

2014-06-01

Currently, in the automotive industry the interaction between drivers and Augmented Reality (AR) systems is a subject of analysis, especially the identification of advantages and risks that this kind of interaction represents. Consequently, this paper attempts to put in evidence the potential applications of Head-Up (Display (HUD) and Head-Down Display (HDD) systems in automotive vehicles, showing applications and trends under study. In general, automotive advances related to AR devices suggest the partial integration of the HUD and HDD in automobiles; however, the right way to do it is still a moot point.

Concept for a Differential Lock and Traction Control Model in Automobiles

Science.gov (United States)

Shukul, A. K.; Hansra, S. K.

2014-01-01

The automobile is a complex integration of electronics and mechanical components. One of the major components is the differential which is limited due to its shortcomings. The paper proposes a concept of a cost effective differential lock and traction for passenger cars to sports utility vehicles alike, employing a parallel braking mechanism coming into action based on the relative speeds of the wheels driven by the differential. The paper highlights the employment of minimum number of components unlike the already existing systems. The system was designed numerically for the traction control and differential lock for the world's cheapest car. The paper manages to come up with all the system parameters and component costing making it a cost effective system.

Experimental investigation of thermal comfort and air quality in an automobile cabin during the cooling period

Energy Technology Data Exchange (ETDEWEB)

Kilic, M.; Akyol, S.M. [Uludag University, Department of Mechanical Engineering, Faculty of Engineering and Architecture, Bursa (Turkey)

2012-08-15

The air quality and thermal comfort strongly influenced by the heat and mass transfer take place together in an automobile cabin. In this study, it is aimed to investigate and assess the effects of air intake settings (recirculation and fresh air) on the thermal comfort, air quality satisfaction and energy usage during the cooling period of an automobile cabin. For this purpose, measurements (temperature, air velocity, CO{sub 2}) were performed at various locations inside the cabin. Furthermore, whole body and local responses of the human subjects were noted while skin temperatures were measured. A mathematical model was arranged in order to estimate CO{sub 2} concentration and energy usage inside the vehicle cabin and verified with experimental data. It is shown that CO{sub 2} level inside of the cabin can be greater than the threshold value recommended for the driving safety if two and more occupants exist in the car. It is also shown that an advanced climate control system may satisfy the requirements for the air quality and thermal comfort as well as to reduce the energy usage for the cooling of a vehicle cabin. (orig.)

Experimental investigation of thermal comfort and air quality in an automobile cabin during the cooling period

Science.gov (United States)

Kilic, M.; Akyol, S. M.

2012-08-01

The air quality and thermal comfort strongly influenced by the heat and mass transfer take place together in an automobile cabin. In this study, it is aimed to investigate and assess the effects of air intake settings (recirculation and fresh air) on the thermal comfort, air quality satisfaction and energy usage during the cooling period of an automobile cabin. For this purpose, measurements (temperature, air velocity, CO2) were performed at various locations inside the cabin. Furthermore, whole body and local responses of the human subjects were noted while skin temperatures were measured. A mathematical model was arranged in order to estimate CO2 concentration and energy usage inside the vehicle cabin and verified with experimental data. It is shown that CO2 level inside of the cabin can be greater than the threshold value recommended for the driving safety if two and more occupants exist in the car. It is also shown that an advanced climate control system may satisfy the requirements for the air quality and thermal comfort as well as to reduce the energy usage for the cooling of a vehicle cabin.

Socio-technical inertia: Understanding the barriers to electric vehicles

International Nuclear Information System (INIS)

Steinhilber, Simone; Wells, Peter; Thankappan, Samarthia

2013-01-01

It is widely accepted that electrification of the transport sector is one of several technological trajectories that could redress some of the environmental issues associated with the growth in travel demand including climate change and oil demand at a global scale, and air quality and noise pollution at the urban scale. Electric vehicles have been considered a promising technology at repeated intervals over the last century, but this promise has not been realised. This paper is a contribution to understanding the key tools and strategies that might enable the successful introduction of new technologies and innovations by exploring the key barriers to electric vehicles encountered in two countries (UK and Germany) where the automobile industry has been historically significant. The study evaluates stakeholders' opinions on relevant regulation, infrastructure investment, R and D incentives, and consumer incentives. The key findings of the research are that the introduction and penetration of EVs is confronted by several barriers that inhibit a larger market penetration under current conditions, which in turn casts doubt on the assumptions of strategic niche management and transitions theory. - Highlights: • Immature developing technology reason behind non-commercialisation of EVs. • EVs currently do not present a significant benefit to the electricity sector. • EVs rely on a mix of regulatory and government measures for their development. • EVs face lock-in problem of unsustainable technologies and related barriers. • Positive milieu for innovation in vehicle technology and business models are required

Abatement cost of GHG emissions for wood-based electricity and ethanol at production and consumption levels.

Directory of Open Access Journals (Sweden)

Puneet Dwivedi

Full Text Available Woody feedstocks will play a critical role in meeting the demand for biomass-based energy products in the US. We developed an integrated model using comparable system boundaries and common set of assumptions to ascertain unit cost and greenhouse gas (GHG intensity of electricity and ethanol derived from slash pine (Pinus elliottii at the production and consumption levels by considering existing automobile technologies. We also calculated abatement cost of greenhouse gas (GHG emissions with respect to comparable energy products derived from fossil fuels. The production cost of electricity derived using wood chips was at least cheaper by 1 ¢ MJ-1 over electricity derived from wood pellets. The production cost of ethanol without any income from cogenerated electricity was costlier by about 0.7 ¢ MJ-1 than ethanol with income from cogenerated electricity. The production cost of electricity derived from wood chips was cheaper by at least 0.7 ¢ MJ-1 than the energy equivalent cost of ethanol produced in presence of cogenerated electricity. The cost of using ethanol as a fuel in a flex-fuel vehicle was at least higher by 6 ¢ km-1 than a comparable electric vehicle. The GHG intensity of per km distance traveled in a flex-fuel vehicle was greater or lower than an electric vehicle running on electricity derived from wood chips depending on presence and absence of GHG credits related with co-generated electricity. A carbon tax of at least $7 Mg CO2e-1 and $30 Mg CO2e-1 is needed to promote wood-based electricity and ethanol production in the US, respectively. The range of abatement cost of GHG emissions is significantly dependent on the harvest age and selected baseline especially for electricity generation.

Automobile simulation model and its identification. Behavior measuring by image processing; Jidosha simulation model to dotei jikken. Gazo kaiseki ni yoru undo no keisoku

Energy Technology Data Exchange (ETDEWEB)

Suzuki, H; Morita, S; Matsuura, Y [Osaka Sangyo University, Osaka (Japan)

1997-10-01

Model simulation technology is important for automobiles development. Especially, for the investigations concerning to ABS, TRC, VDC, and so on, the model should be the one which can simulates not only whole behaviors of the automobile, but also such internal information as torque, acceleration, and, velocity of each drive shafts, etc.. From this point of view, 4-wheels simulation model which can simulates almost over 50 items, was made. On the other hand, technique of 3-D image processing using 2 video cameras was adopted to identify the model. Considerably good coincidences were recognized between the simulated values and measured ones. 3 refs., 7 figs., 2 tabs.

The computer simulation of automobile use patterns for defining battery requirements for electric cars

Science.gov (United States)

Schwartz, H. J.

1976-01-01

A Monte Carlo simulation process was used to develop the U.S. daily range requirements for an electric vehicle from probability distributions of trip lengths and frequencies and average annual mileage data. The analysis shows that a car in the U.S. with a practical daily range of 82 miles (132 km) can meet the needs of the owner on 95% of the days of the year, or at all times other than his long vacation trips. Increasing the range of the vehicle beyond this point will not make it more useful to the owner because it will still not provide intercity transportation. A daily range of 82 miles can be provided by an intermediate battery technology level characterized by an energy density of 30 to 50 watt-hours per pound (66 to 110 W-hr/kg). Candidate batteries in this class are nickel-zinc, nickel-iron, and iron-air. The implication of these results for the research goals of far-term battery systems suggests a shift in emphasis toward lower cost and greater life and away from high energy density.

The computer simulation of automobile use patterns for defining battery requirements for electric cars

Science.gov (United States)

Schwartz, H.-J.

1976-01-01

The modeling process of a complex system, based on the calculation and optimization of the system parameters, is complicated in that some parameters can be expressed only as probability distributions. In the present paper, a Monte Carlo technique was used to determine the daily range requirements of an electric road vehicle in the United States from probability distributions of trip lengths, frequencies, and average annual mileage data. The analysis shows that a daily range of 82 miles meets to 95% of the car-owner requirements at all times with the exception of long vacation trips. Further, it is shown that the requirement of a daily range of 82 miles can be met by a (intermediate-level) battery technology characterized by an energy density of 30 to 50 Watt-hours per pound. Candidate batteries in this class are nickel-zinc, nickel-iron, and iron-air. These results imply that long-term research goals for battery systems should be focused on lower cost and longer service life, rather than on higher energy densities

Considerations regarding tax optimization in implanted multinational enterprises through external growth for the automobile industry in Central Eastern Europe

Directory of Open Access Journals (Sweden)

Nitu Antonie Renata

2008-04-01

Full Text Available The business strategy of multinational enterprises (MNEs from the automobile industry implanted in Central-Eastern European (CEE countries (Poland, Czech Republic and Romania is an offensive one, global from operational perspective. Mainly it aims the extension of market share through horizontal growth, generally external type single-domain (Mergers and Acquisitions and internal type (Greenfield investments in a lower degree. These enterprises put in practice also a defending strategy for the owned market shares through increasing the efficiency of the production network at global level. This paper aims to present the less evident aspects of tax optimization of the applied business strategy by implemented MNEs in the automobile industry in CEE, and in this context, the necessity to establish transfer prices in accordance with the OECD recommendations, as an obligation assessed by the tax legislations of the considered countries, but also from the necessity of efficient run of these enterprises.

Alternative drives for motor cars. Hybrid systems, fuel cells, alternative energy sources. 2. enl. ed.; Alternative Antriebe fuer Automobile. Hybridsysteme, Brennstoffzellen, alternative Energietraeger

Energy Technology Data Exchange (ETDEWEB)

Stan, Cornel [Berkeley Univ., CA (United States)]|[Paris Univ. (France)]|[Pisa Univ. (Italy)]|[Perugia Univ. (Italy)]|[Westsaechsischen Hochschule Zwickau (Germany)

2008-07-01

The implementation possibilities of future drive concepts - from hybrid systems comprising an electric motor and an internal combustion engine to fuel cells to alternative fuels like hydrogen or alcohol - will depend largely on quality criteria, e.g. power density, rotary momentum, acceleration characteristics, specific energy consumption, emissions of chemical substances, and noise. The boundary criteria for the introduction of realizeable concepts of alternative drives for motor cars will be defined by the availability and storability of the envisaged fuels, technical complexity, cost, safety, infrastructure and service. The book presents and analyzes the processes, drives and energy sources that can be combined in complex energy management systems for motor cars in accordance with the aforementioned criteria. Knowledge about these facts is indispensable for the development of new concepts. The 2nd edition describes many new developments in car propulsion systems as well as their combinations, new energy sources, energy converters and energy stores. All contents and literature reflect the latest state of science and technology. (orig.) [German] Ueber die Realisierungsmoeglichkeiten zukuenftiger Antriebskonzepte - von Hybridsystemen Elektro-/Verbrennungsmotor ueber Brennstoffzellen bis zu alternativen Energietraegern wie Wasserstoff oder Alkohol - werden fundierte Kriterien der Qualitaet eines Antriebs entscheiden. Leistungsdichte, Drehmomentverlauf, Beschleunigungscharakteristik, spezifischer Energieverbrauch sowie Emission chemischer Stoffe und Geraeusche sind dafuer wichtige Merkmale zur Qualitaetsbeurteilung. Die Verfuegbarkeit und die Speicherfaehigkeit vorgesehener Energietraeger, die technische Komplexitaet, Kosten, Sicherheit, Infrastruktur und Service werden die Randbedingungen fuer die Einfuehrung realisierbarer Konzepte alternativer Antriebe fuer Automobile stellen. Die Uebersicht und die Analyse der Prozesse, Antriebsmaschinen und Energietraeger, die

Preliminary research on virtual thermal comfort of automobile occupants

Science.gov (United States)

Horobet, Tiberiu; Danca, Paul; Nastase, Ilinca; Bode, Florin

2018-02-01

Numerical simulation of climate conditions in automotive industry for the study of thermal comfort had become more and more prominent in the last years compared with the classical approach which consists in wind tunnel measurements and field testing, the main advantages being the reduction of vehicle development time and costs. The study presented in this paper is a part of a project intended to evaluate different strategies of cabin ventilation for improving the thermal comfort inside vehicles. A virtual thermal manikin consisting of 24 parts was introduced on the driver seat in a vehicle. A heat load calculated for summer condition in the city of Cluj-Napoca, Romania was imposed as boundary condition. The purpose of this study was to elaborate a virtual thermal manikin suitable for our research, introduction of the manikin inside the vehicle and to examine his influence inside the automobile. The thermal comfort of the virtual manikin was evaluated in terms of temperature and air velocity.

How the conversations in social media concern in sales in the automobile industry in spain

OpenAIRE

González Carreño, Gema; Rejas Muslera, Ricardo; Padilla Fernández-Vega, Juan; Cepeda González, M.I

2013-01-01

Automobile Industry has great importance in the Spanish economy (8,7 % of the active Spanish population is employed in this sector).The above mentioned sector has been one of the principal sectors affected by the current economic crisis, consistently, the budgets in advertising have been severely limited (46,9 % less in the period of reference), these needs of reduction have originated a substantial change in the advertising strategy (from 2007 the increase of the advertising investment in In...

CORPORATE SOCIAL RESPONSIBILITY IN THE AUTOMOBILE INDUSTRY IN SLOVAK REPUBLIC

Directory of Open Access Journals (Sweden)

Jana Vicianová

2011-01-01

Full Text Available At present, the corporate social responsibility should be seen not only in theory, but mainlyat the level of business practice. Companies that apply the concept of corporate socialresponsibility are aware not only of social and environmental benefits, but also theeconomic benefits that this approach brings. Assumptions of social responsibility are tomaximize the market value of the business provided that companies respect the laws andresponsibilities of owners, managers and employees. Benefits of the corporate socialresponsibility are not only companies and their stakeholders, but also society. This factinspires many large enterprises to start up a socially responsible business. The paper dealswith the corporate social responsibility concept and its implementation in the car industryin Slovak republic. The aim of the article is basically on the theories of corporate socialresponsibility to identify the level of application of this concept in automobile industry inSlovakia.

Energy Optimization for a Weak Hybrid Power System of an Automobile Exhaust Thermoelectric Generator

Science.gov (United States)

Fang, Wei; Quan, Shuhai; Xie, Changjun; Tang, Xinfeng; Ran, Bin; Jiao, Yatian

2017-11-01

An integrated starter generator (ISG)-type hybrid electric vehicle (HEV) scheme is proposed based on the automobile exhaust thermoelectric generator (AETEG). An eddy current dynamometer is used to simulate the vehicle's dynamic cycle. A weak ISG hybrid bench test system is constructed to test the 48 V output from the power supply system, which is based on engine exhaust-based heat power generation. The thermoelectric power generation-based system must ultimately be tested when integrated into the ISG weak hybrid mixed power system. The test process is divided into two steps: comprehensive simulation and vehicle-based testing. The system's dynamic process is simulated for both conventional and thermoelectric powers, and the dynamic running process comprises four stages: starting, acceleration, cruising and braking. The quantity of fuel available and battery pack energy, which are used as target vehicle energy functions for comparison with conventional systems, are simplified into a single energy target function, and the battery pack's output current is used as the control variable in the thermoelectric hybrid energy optimization model. The system's optimal battery pack output current function is resolved when its dynamic operating process is considered as part of the hybrid thermoelectric power generation system. In the experiments, the system bench is tested using conventional power and hybrid thermoelectric power for the four dynamic operation stages. The optimal battery pack curve is calculated by functional analysis. In the vehicle, a power control unit is used to control the battery pack's output current and minimize energy consumption. Data analysis shows that the fuel economy of the hybrid power system under European Driving Cycle conditions is improved by 14.7% when compared with conventional systems.

AUTOMOBILE AND SELFHOOD: CAR NARRATIVES IN TURKISH LITERATURE / OTOMOBİL VE BENLİK: TÜRK EDEBİYATINDA ARABA OLGUSU

Directory of Open Access Journals (Sweden)

Dr. Seyit Battal UĞURLU

2009-01-01

Full Text Available The automobile that entered into the Turkish novelwith Recaizâde Mahmut Ekrem's Car Affairs, in onerespect, is one of the status determinant in traditionalTurkish culture that has taken part instead of horse. Theautomobiles power is still measured as horse powerwhich has close psycho-cultural ties with the discourse of'horse, woman and the gun', that is considerable code oftraditional Turkish culture. Thinking its accreditation ofcapacity of speed performance it can be stressed thatautomobiles have changeable genders depending on menand women. When producing new models, cardesignator’s inspiration is greatly feminity and body ofwomen. Becoming one of the attractive ways of selfrealization of individuals, the automobile, protects usagainst lack of confidence of the external, presentsindividuals a lot of opportunities. Automobile’sattractiveness comes from its power to provide manypossibilities of supremacy over pedestrian way of life aswell as gigantic prosperous life style. The reflections ofthis important device of modern world seems in theTurkish literature parallel with social life. In YellowTractor by Talip Apaydın, Slender Rose of my Thought byAdalet Ağaoğlu, “The Clown Rusen” by Sevim Burak andIcy Swords by Latife Tekin narration can be mentioned afocus on human technology relation as a social fact. “TheCold” by Ömer Seyfettin, “The Spare Part of Civilization”by Aziz Nesin, and “Jaguar” by Peride Celâl focuses on automobile and its social reflections. A close scrutinyhas been conducted into cars as an important mediumof self identification within the context of modern man,its reflections in Turkish literature with provocativepsycho-social factors though a critical and analyticalpoint of view.

Is Automobile Dependence in Emerging Cities an Irresistible Force? Perspectives from São Paulo, Taipei, Prague, Mumbai, Shanghai, Beijing, and Guangzhou

Directory of Open Access Journals (Sweden)

Jeffrey R. Kenworthy

2017-10-01

Full Text Available This paper analyses seven metropolitan regions that are all experiencing rapid motorisation and are perhaps appearing to capitulate to the automobile. Through 20 years of changes, evidenced in systematic data from the mid-1990s, a different perspective is found. None of the urban regions appear near to or even capable of becoming automobile cities. Physical limits are already being reached that make higher levels of private motorised mobility very problematic if transport systems are to remain functional and the cities livable. These limits appear already to be reversing the decline in non-motorised modes and creating an upturn in transit systems, especially urban rail. That these cities have been able to either hold their own, or somewhat increase their share of total motorised mobility by transit over a 20-year period, is some indication that they are ‘hitting mobility walls’ much sooner in the motorisation path than cities in North America and Australia, which grew up with and were designed around the spatial needs of cars. Like many cities in the developed world that have shown a decoupling of car use and total passenger mobility from GDP growth from 1995 to 2005, there is now evidence that this is happening in less wealthy cities. This is important because it assists global and local goals for reduced CO2 from passenger transport, while allowing for economic progress. Such evidence suggests that automobile dependence is not an irresistible force in emerging economies.

A DEVICE FOR PURIFICATION OF OIL- AND FAT-CONTAINING GRAY WATERS FOR THE USE AT AUTOMOBILE LAUNDRIES AND PUBLIC CATERING ESTABLISHMENTS

International Nuclear Information System (INIS)

Makharoblidze, N.

2007-01-01

There is proposed a device (a filter) for the use at automobile lauundries and public catering establishments for local purification of waste waters containing oil products and/or fats before their draining into the municipal sewage system. (author)

Experimental investigations on automobile air conditioners working with R134a and R290/R600a as an alternative

Directory of Open Access Journals (Sweden)

Kandhaswamy Karthikeyan

2017-01-01

Full Text Available In this work, the performance of R134a based automobile air conditioning system has been evaluated by retrofitted with R290/R600a mixture (in the ratio of 50:50, by mass, as an alternative. The performance was evaluated at five different operating speeds (1000, 1500, 2000, 2500, and 3000, which covers the entire range of working conditions with four different cabin load (100, 200, 300, and 400 W. The condenser inlet air temperature was varied in the range between 30 and 50°C, which covers the entire climatic variations in Coimbatore city of India. The performance characteristics such as, refrigerating effect, coefficient of performance, compressor power consumption, and compressor discharge temperatures were considered for comparison. The results showed that, hydrocarbon mixture has faster cooling rate due to its high latent heat of vaporization, 5% higher coefficient of performance due to higher refrigeration effect, 8-10 K lower compressor discharge temperature due to its lower specific heat ratio with 5% lower compressor power consumption due to its lower viscosity and lower liquid density. The charge requirement of R290/R600a mixture is about 50% less compared to R134a. However, the mixture composition is considered as an interment replacement in automobile air conditioners due to composition shift under leak-age conditions. Hence, R290/R600a mixture is considered as an interim energy efficient and environment friendly option in R134a automobile air conditioners to extend its life.

[Clinical manifestations of lead levels in children exposed to automobile battery recycling processes in Soacha and Bogotá, D.C].

Science.gov (United States)

Hurtado, Carlos Mauricio; Gutiérrez, Myriam; Echeverry, Jairo

2008-03-01

Lead is a harmless metal if not handled directly in the industrial process. Even thought lead has been eliminated from the gasoline in many countries, automobile battery recycling continues to be a potential source of exposure and intoxication for the workers and their families, particularly of low income. The current investigation was initiated after an index case of lead poisoning was reported from Soacha, Cundinamarca, in central Colombia. Clinical investigation established lead levels and lead poison frequency in children with para-occupational lead exposure in the process of recycling automobile batteries. This was designed as a descriptive study, with selection of subjects with high risk of possible lead exposure. Minors, mostly of school age were recruited based on referral by relatives, neighbors or acquaintances, all of whom were involved in para-occupational exposure. Thirty two children, less than 12 years old (majority school age), were included. General and specific examinations of the children were made, and blood samples were taken for lead and hematological determinations. All subjects showed high levels of lead (2-9 times the maximum acceptable value) and, according to established criteria, two-thirds were rated as severely poisoned. The children with high levels of lead had tendency toward more specific hematological compromise and showing black gingival bordering (Burton border). This study communicates to the sanitary authorities and government a clear sign of alarm in that measures must be taken to diminish the occupational or para-occupational lead exposure of children by way of the automobile battery recycling industry.

FY 2005 Oak Ridge National Laboratory Annual Progress Report for the Power Electronics and Electric Machinery Program

Energy Technology Data Exchange (ETDEWEB)

Olszewski, M

2005-11-22

appropriate technical targets for systems, subsystems, and component research and development activities; (2) Develop and validate individual subsystems and components, including electric motors, emission control devices, battery systems, power electronics, accessories, and devices to reduce parasitic losses; and (3) Determine how well the components and subsystems work together in a vehicle environment or as a complete propulsion system and whether the efficiency and performance targets at the vehicle level have been achieved. The research performed under the Vehicle Systems subprogram will help remove technical and cost barriers to enable technology for use in such advanced vehicles as hybrid and fuel-cell-powered automobiles that meet the goals of the FreedomCAR Program. A key element in making hybrid electric vehicles practical is providing an affordable electric traction drive system. This will require attaining weight, volume, and cost targets for the power electronics and electrical machines subsystems of the traction drive system. Areas of development include: (1) Novel traction motor designs that result in increased power density and lower cost; (2) Inverter technologies involving new topologies to achieve higher efficiency and the ability to accommodate higher-temperature environments; (3) Converter concepts that employ means of reducing the component count and integrating functionality to decrease size, weight, and cost; (4) More effective thermal control and packaging technologies; and (5) Integrated motor/inverter concepts. The Oak Ridge National Laboratory's (ORNL's) Power Electronics and Electric Machinery Research Center conducts fundamental research, evaluates hardware, and assists in the technical direction of the DOE Office of FreedomCAR and Vehicle Technologies Program, Power Electronics and Electric Machinery Program. In this role, ORNL serves on the FreedomCAR Electrical and Electronics Technical Team, evaluates proposals for DOE, and lends its

Design and Testing of a Thermal Storage System for Electric Vehicle Cabin Heating

Energy Technology Data Exchange (ETDEWEB)

Wang, Mingyu [MAHLE Behr Troy Inc.; WolfeIV, Edward [MAHLE Behr Troy Inc.; Craig, Timothy [MAHLE Behr Troy Inc.; LaClair, Tim J [ORNL; Gao, Zhiming [ORNL; Abdelaziz, Omar [ORNL

2016-01-01

Without the waste heat available from the engine of a conventional automobile, electric vehicles (EVs) must provide heat to the cabin for climate control using energy stored in the vehicle. In current EV designs, this energy is typically provided by the traction battery. In very cold climatic conditions, the power required to heat the EV cabin can be of a similar magnitude to that required for propulsion of the vehicle. As a result, the driving range of an EV can be reduced very significantly during winter months, which limits consumer acceptance of EVs and results in increased battery costs to achieve a minimum range while ensuring comfort to the EV driver. To minimize the range penalty associated with EV cabin heating, a novel climate control system that includes thermal energy storage has been designed for use in EVs and plug-in hybrid electric vehicles (PHEVs). The system uses the stored latent heat of an advanced phase change material (PCM) to provide cabin heating. The PCM is melted while the EV is connected to the electric grid for charging of the electric battery, and the stored energy is subsequently transferred to the cabin during driving. To minimize thermal losses when the EV is parked for extended periods, the PCM is encased in a high performance insulation system. The electrical PCM-Assisted Thermal Heating System (ePATHS) was designed to provide enough thermal energy to heat the EV s cabin for approximately 46 minutes, covering the entire daily commute of a typical driver in the U.S.

Assessing location attractiveness for manufacturing automobiles

Energy Technology Data Exchange (ETDEWEB)

Hanawalt, Edward; Rouse, William

2017-07-01

Evaluating country manufacturing location attractiveness on various performance measures deepens the analysis and provides a more informed basis for manufacturing site selection versus reliance on labor rates alone. A short list of countries can be used to drive regional considerations for site-specific selection within a country. Design/methodology/approach: The two-step multi attribute decision model contains an initial filter layer to require minimum values for low weighted attributes and provides a rank order utility score for twenty three countries studied. The model contains 11 key explanatory variables with Labor Rate, Material Cost, and Logistics making up the top 3 attributes and representing 54% percent of the model weights. Findings: We propose a multi attribute decision framework for strategically assessing the attractiveness of a country as a location for manufacturing automobiles. Research limitations/implications: Consideration of country level wage variation, specific tariffs, and other economic incentives provides a secondary analysis after the initial list of candidate countries is defined. Practical implications: The results of our modeling shows China, India, and Mexico are currently the top ranked countries for manufacturing attractiveness. These three markets hold the highest utility scores throughout sensitivity analysis on the labor rate attribute weight rating, highlighting the strength and potential of manufacturing in China, India, and Mexico. Originality/value: Combining MAUT with regression analysis to simplify model to core factors then using a “must have” layer to handle extreme impacts of low weight factors and allowing for ease of repeatability.

Assessing location attractiveness for manufacturing automobiles

International Nuclear Information System (INIS)

Hanawalt, Edward; Rouse, William

2017-01-01

Evaluating country manufacturing location attractiveness on various performance measures deepens the analysis and provides a more informed basis for manufacturing site selection versus reliance on labor rates alone. A short list of countries can be used to drive regional considerations for site-specific selection within a country. Design/methodology/approach: The two-step multi attribute decision model contains an initial filter layer to require minimum values for low weighted attributes and provides a rank order utility score for twenty three countries studied. The model contains 11 key explanatory variables with Labor Rate, Material Cost, and Logistics making up the top 3 attributes and representing 54% percent of the model weights. Findings: We propose a multi attribute decision framework for strategically assessing the attractiveness of a country as a location for manufacturing automobiles. Research limitations/implications: Consideration of country level wage variation, specific tariffs, and other economic incentives provides a secondary analysis after the initial list of candidate countries is defined. Practical implications: The results of our modeling shows China, India, and Mexico are currently the top ranked countries for manufacturing attractiveness. These three markets hold the highest utility scores throughout sensitivity analysis on the labor rate attribute weight rating, highlighting the strength and potential of manufacturing in China, India, and Mexico. Originality/value: Combining MAUT with regression analysis to simplify model to core factors then using a “must have” layer to handle extreme impacts of low weight factors and allowing for ease of repeatability.

A Study of Structural Stress Technique for Fracture Prediction of an Auto-Mobile Clutch Snap-Ring

International Nuclear Information System (INIS)

Kim, Ju Hee; Myeong, Man Sik; Oh, Chang Sik; Kim, Yun Jae

2016-01-01

The endurance reliability assessment of a highly complex mechanism is generally predicted by the fatigue life based on simple stress analysis. This study discusses various fatigue life assessment techniques for an automobile clutch snap ring. Finite element analyses were conducted to determine the structural stress on the snap ring. Structural stress that is insensitive in regards to the mesh size and type definition is presented in this study. The structural stress definition is consistent with elementary structural mechanics theory and provides an effective measure of a stress state that pertains to fatigue behavior of welded joints in the form of both membrane and bending components. Numerical procedures for both solid models and shell or plate element models are presented to demonstrate the mesh-size insensitivity when extracting the structural stress parameters. Conventional finite element models can be used with the structural stress calculations as a post-processing procedure. The two major implications from this research were: (a) structural stresses pertaining to fatigue behavior can be consistently calculated in a mesh-insensitive manner regardless of the types of finite element models; and (b) by comparing with the clutch snap-ring fatigue test data, we should predict the fatigue fractures of an automobile clutch snap ring using this method

R&D Importance in Improving Automobile Trading Market Perspektyvūs moksliniai tyrimai, skirti tarptautiniam prekybos automobiliais verslui plėtoti

Directory of Open Access Journals (Sweden)

Aurelija Mickonytė

2011-02-01

Full Text Available

Production and sales of automobiles are significant parts of the 21st century economy. The aim of this study is to reveal the latest and most perspective scientific research directions in improving international automobile trading business by using scientific sources and official statistics. Scientific researchers are focused on strategic means that have to be taken in order to recover the market share and past sales volumes.This study reveals that even though sales volumes of automobiles in general are decreasing rapidly, sales of compact class automobiles are improving. Three main reasons for this fact are stated. First is price, second is the model of automobile and its technical characteristics, third reason is growing environmentalism. Regarding the mentioned reasons for automobile market over grouping by segments, three main scientific research directions are discussed: those that are due to price reduction, technical appearance focused and environment focused scientific researches.

Keywords: scientific research, international automobile trading, automobile production improvement.

Automobilių gamyba ir prekyba jais yra išskirtinai svarbūs elementai šiuolaikinės visuomenės ekonomikai. Šalys, kurios užsiima automobilių gamyba, gerokai padidino eksportą, kuris yra susijęs su bendro vidaus produkto ir bendro nacionalinio produkto augimu. Automobilių gamybos sektorius

Providing Consumers with Web-Based Information on the Environmental Effects of Automobiles

Energy Technology Data Exchange (ETDEWEB)

Saulsbury, J.W.

2003-08-25

The Department of Energy (DOE) and the Environmental Protection Agency (EPA) provide consumers with web-based information on the environmental effects of automobiles so that individuals can make informed choices about the vehicles they use or may purchase. DOE and EPA maintain a web site (www.fueleconomy.gov) that provides users with information about fuel economy [as well as greenhouse gas (GHG) emissions and air pollution emissions] for the cars and trucks they use or may consider purchasing. EPA also maintains a separate web site (www.epa.gov/greenvehicles) that offers similar information, with the focus on air pollution emissions rather than fuel economy. The American Council for an Energy-Efficient Economy (ACEEE) (www.greenercars.com) and the California Air Resources Board (CARB) (www.arb.ca.gov/msprog/ccbg/ccbg.htm) also maintain web sites that provide consumers with information on the environmental effects of automobiles. Through the National Transportation Research Center (NTRC) at Oak Ridge National Laboratory, DOE has supported some initial qualitative research with people who are interested in purchasing a new or used vehicle and whose actions identify them as at least somewhat concerned about the environment. The purpose of this research was to explore and understand how these people respond to the different ratings and measurements of environmental effects provided by the four web sites. The goal of the research is to optimize the communication of information provided on the DOE/EPA web site (www.fueleconomy.gov). Working with a private marketing research firm (The Looking Glass Group of Knoxville, Tennessee), NTRC staff initiated this research by meeting with two focus groups in Knoxville on February 27, 2001. To obtain information for comparison, staff from the NTRC and the Looking Glass Group also met with two focus groups in Los Angeles, California, on August 13, 2001.

A reestruturação na indústria automobilística brasileira perante o atual processo de globalização

OpenAIRE

Castro, Victor Raul Paredes

2001-01-01

O conteúdo deste trabalho tem como tema principal a análise da reestruturação do setor automobilístico brasileiro a partir das mudanças acontecidas nos sistemas fordista pela "produção enxuta".

Project in fiscal 2000 of developing international standards for supporting new industries. Standardization of method for measuring fuel consumption of hybrid electric automobile; 2000 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Hybrid denki jidosha no nenpi sokutei hoho no hyojunka

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With proposal of a standard draft to ISO as a target, R and D has been performed for three years since fiscal 1998 on a method for measuring fuel consumption of hybrid electric automobiles. This paper summarizes the achievements thereof. In the R and D, analyses were conducted on elements particular to a hybrid system considered to influence the fuel consumption, such as the remaining capacity in the main batteries, fuel consumption for regenerative braking, and effects on exhaust gas. As a result, it was revealed that correction is required for change in the remaining capacity in the main batteries before and after the test with regard to the fuel consumption, and that this is possible. Discussions were given on a method for fuel consumption test by using the driving modes adopted in Japan, America and Europe using four types of HEV having different hybrid systems and mounted batteries. Comparisons and discussions were given on the 'continuously repeated mode averaging method','primary approximation method' and 'SAEJ1711 and its test establishment criteria'. As a result, the primary approximation method was proved to be the best as the HEV fuel consumption test method. At the same time, necessity of standardizing the current measuring device and the measuring method was pointed out in the fuel consumption measurement using the primary approximation method and SAEJ1711. (NEDO)

A life-cycle comparison of alternative automobile fuels.

Science.gov (United States)

MacLean, H L; Lave, L B; Lankey, R; Joshi, S

2000-10-01

We examine the life cycles of gasoline, diesel, compressed natural gas (CNG), and ethanol (C2H5OH)-fueled internal combustion engine (ICE) automobiles. Port and direct injection and spark and compression ignition engines are examined. We investigate diesel fuel from both petroleum and biosources as well as C2H5OH from corn, herbaceous bio-mass, and woody biomass. The baseline vehicle is a gasoline-fueled 1998 Ford Taurus. We optimize the other fuel/powertrain combinations for each specific fuel as a part of making the vehicles comparable to the baseline in terms of range, emissions level, and vehicle lifetime. Life-cycle calculations are done using the economic input-output life-cycle analysis (EIO-LCA) software; fuel cycles and vehicle end-of-life stages are based on published model results. We find that recent advances in gasoline vehicles, the low petroleum price, and the extensive gasoline infrastructure make it difficult for any alternative fuel to become commercially viable. The most attractive alternative fuel is compressed natural gas because it is less expensive than gasoline, has lower regulated pollutant and toxics emissions, produces less greenhouse gas (GHG) emissions, and is available in North America in large quantities. However, the bulk and weight of gas storage cylinders required for the vehicle to attain a range comparable to that of gasoline vehicles necessitates a redesign of the engine and chassis. Additional natural gas transportation and distribution infrastructure is required for large-scale use of natural gas for transportation. Diesel engines are extremely attractive in terms of energy efficiency, but expert judgment is divided on whether these engines will be able to meet strict emissions standards, even with reformulated fuel. The attractiveness of direct injection engines depends on their being able to meet strict emissions standards without losing their greater efficiency. Biofuels offer lower GHG emissions, are sustainable, and

A Life-Cycle Comparison of Alternative Automobile Fuels.

Science.gov (United States)

MacLean, Heather L; Lave, Lester B; Lankey, Rebecca; Joshi, Satish

2000-10-01

We examine the life cycles of gasoline, diesel, compressed natural gas (CNG), and ethanol (C 2 H 5 OH)-fueled internal combustion engine (ICE) automobiles. Port and direct injection and spark and compression ignition engines are examined. We investigate diesel fuel from both petroleum and biosources as well as C 2 H 5 OH from corn, herbaceous bio-mass, and woody biomass. The baseline vehicle is a gasoline-fueled 1998 Ford Taurus. We optimize the other fuel/powertrain combinations for each specific fuel as a part of making the vehicles comparable to the baseline in terms of range, emissions level, and vehicle lifetime. Life-cycle calculations are done using the economic input-output life-cycle analysis (EIO-LCA) software; fuel cycles and vehicle end-of-life stages are based on published model results. We find that recent advances in gasoline vehicles, the low petroleum price, and the extensive gasoline infrastructure make it difficult for any alternative fuel to become commercially viable. The most attractive alternative fuel is compressed natural gas because it is less expensive than gasoline, has lower regulated pollutant and toxics emissions, produces less greenhouse gas (GHG) emissions, and is available in North America in large quantities. However, the bulk and weight of gas storage cylinders required for the vehicle to attain a range comparable to that of gasoline vehicles necessitates a redesign of the engine and chassis. Additional natural gas transportation and distribution infrastructure is required for large-scale use of natural gas for transportation. Diesel engines are extremely attractive in terms of energy efficiency, but expert judgment is divided on whether these engines will be able to meet strict emissions standards, even with reformulated fuel. The attractiveness of direct injection engines depends on their being able to meet strict emissions standards without losing their greater efficiency. Biofuels offer lower GHG emissions, are sustainable

New ETR 450/ETR 500 electric railcars for the FS

Energy Technology Data Exchange (ETDEWEB)

Messerschmidt, W

1986-04-01

Also in Italy research and development projects are of eminent importance in present transport policies. The Italian State Railways (FS) and the industry are intensifying their development programmes especially in respect of high- speed travel, but the planners emphasize that priority must be given not only to propulsion technology but now more than ever to overall styling and design. Whereas the eleven-unit electric railcar ETR 450 now being built clearly shows its common ancestry with the smaller four-unit prototype ETR 401 (with coach-body tilt control), the ETR 500 super-train now taking shape in the design offices of the FS and the industry will have radically new aesthetics that show the influence of the automobile designer. At the FS the view is that there is a need to 'sell' not only technology but also the design creativity that can bring big returns in terms of public favour.

Logística e troca eletrônica de informação em empresas automobilísticas e alimentícias Logistics and electronic information interchange in automotive and food companies

Directory of Open Access Journals (Sweden)

Karine Araújo Ferreira

2005-12-01

Full Text Available Este artigo analisa impactos na logística pela troca eletrônica de informações entre empresas (com uso de EDI - Electronic Data Interchange e Internet, destacando a diferença destes impactos em empresas das indústrias alimentícia e automobilística. As empresas são pressionadas por parceiros para adoção destas tecnologias: a montadora é a responsável na cadeia automobilística e o grande varejo é o disseminador na cadeia alimentícia. O EDI pressupõe relações contratuais entre as empresas. As processadoras de alimentos observaram redução de erros e no tempo dos ciclos de pedido, assim como melhoria na visibilidade dos estoques e no planejamento de transporte para distribuição de seus produtos. Já nas empresas da indústria automobilística, os impactos são mais significativos no tempo e custo de processamento de pedido, com redução nos níveis e custo de estoque e de transporte para suprimento. Os resultados são de pesquisa de natureza qualitativa - estudos de casos.This paper analyzes the impacts of electronic information exchange (EDI - Electronic Data Interchange and Internet toward companies' logistics performance, emphasizing the difference of these impacts within food and automobile industries. Companies are being impelled by their partners to adopt these information technologies, whether: vehicle assemblers are responsible for the automobile chain; and great retailers work as disseminators through the food chain. EDI's implementation requires contractual relations among companies. Therefore, food processing industries aim to reduce both errors and cycle-time orders; as well as to improve inventory visibility and transport planning in the distribution of its products. However, in the automobile companies segment, the impacts are more significant in time and order processing costs, with the reduction of inventory and transport level's costs for supplying. The presented results are of qualitative research nature

Physico-chemical and optical properties of combustion-generated particles from coal-fired power plant, automobile and ship engine and charcoal kiln.

Science.gov (United States)

Kim, Hwajin

2015-04-01

Similarities and differences in physico-chemical and optical properties of combustion generated particles from various sources were investigated. Coal-fired power plant, charcoal kiln, automobile and ship engine were major sources, representing combustions of coal, biomass and two different types of diesel, respectively. Scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (EDX) equipped with both SEM and HRTEM were used for physico-chemical analysis. Light absorbing properties were assessed using a spectrometer equipped with an integrating sphere. Particles generated from different combustion sources and conditions demonstrate great variability in their morphology, structure and composition. From coal-fired power plant, both fly ash and flue gas were mostly composed of heterogeneously mixed mineral ash spheres, suggesting that the complete combustion was occurred releasing carbonaceous species out at high temperature (1200-1300 °C). Both automobile and ship exhausts from diesel combustions show typical features of soot: concentric circles comprised of closely-packed graphene layers. However, heavy fuel oil (HFO) combusted particles from ship exhaust demonstrate more complex compositions containing different morphology of particles other than soot, e.g., spherical shape of char particles composed of minerals and carbon. Even for the soot aggregates, particles from HFO burning have different chemical compositions; carbon is dominated but Ca (29.8%), S (28.7%), Na(1%), and Mg(1%) are contained, respectively which were not found from particles of automobile emission. This indicates that chemical compositions and burning conditions are significant to determine the fate of particles. Finally, from biomass burning, amorphous and droplet-like carbonaceous particles with no crystallite structure are observed and they are generally formed by the condensation of low volatile species at low

Development of a solar-powered electric bicycle in bike sharing transportation system

Science.gov (United States)

Adhisuwignjo, S.; Siradjuddin, I.; Rifa'i, M.; Putri, R. I.

2017-06-01

The increasing mobility has directly led to deteriorating traffic conditions, extra fuel consumption, increasing automobile exhaust emissions, air pollution and lowering quality of life. Apart from being clean, cheap and equitable mode of transport for short-distance journeys, cycling can potentially offer solutions to the problem of urban mobility. Many cities have tried promoting cycling particularly through the implementation of bike-sharing. Apparently the fourth generation bikesharing system has been promoted utilizing electric bicycles which considered as a clean technology implementation. Utilization of solar power is probably the development keys in the fourth generation bikesharing system and will become the standard in bikesharing system in the future. Electric bikes use batteries as a source of energy, thus they require a battery charger system which powered from the solar cells energy. This research aims to design and implement electric bicycle battery charging system with solar energy sources using fuzzy logic algorithm. It is necessary to develop an electric bicycle battery charging system with solar energy sources using fuzzy logic algorithm. The study was conducted by means of experimental method which includes the design, manufacture and testing controller systems. The designed fuzzy algorithm have been planted in EEPROM microcontroller ATmega8535. The charging current was set at 1.2 Amperes and the full charged battery voltage was observed to be 40 Volts. The results showed a fuzzy logic controller was able to maintain the charging current of 1.2 Ampere with an error rate of less than 5% around the set point. The process of charging electric bike lead acid batteries from empty to fully charged was 5 hours. In conclusion, the development of solar-powered electric bicycle controlled using fuzzy logic controller can keep the battery charging current in solar-powered electric bicycle to remain stable. This shows that the fuzzy algorithm can be used as

A study on an electronically controlled liquefied petroleum gas diesel dual-fuel automobile

Energy Technology Data Exchange (ETDEWEB)

Chunhua Zhang; Yaozhang Bian; Lizeng Si; Junzhi Liao; Odbileg, N. [Chang' an Univ., Automobile Faculty, Xi' an (China)

2005-02-15

In this paper, the control scheme of a liquefied petroleum gas (LPG)-diesel dual-fuel engine with electronic control is illustrated, the external characteristics and load characteristics of the LPG-diesel dual-fuel engine and the diesel engine are compared and analysed, and the results of automobile road tests are also given. The experimental results show that, compared with diesel, the output performance of dual fuel is not reduced, while smoke emission of dual fuel is significantly reduced, NO{sub x} emission of dual fuel is hardly changed, but HC emission and CO emission of dual fuel are increased and fuel consumption of dual fuel is reduced. (Author)

The Evolution of Car Sales in S.C. Next Automobile S.A. During the Crisis

OpenAIRE

Savu Mihaela; Antonescu Eugenia; Mîndreci Georgiana

2012-01-01

The automotive industry had to withstand the effects of the economic crisis, a fact underlined by the automobile production which had a volume decrease between 2008 and 2009. The same situation occurred on the car market in Romania, with the difference that the decline began in 2009 and it has continued up to now. Regarding the car sales, the Toyota brand was negatively affected by the crisis and the number of cars sold decreased between 2009 and 2010. The same situation is specific for S.C. ...

Charging and discharging time control of electric vehicles for the purpose of load leveling; Fuka heijunka wo mokuteki to suru denki jidosha no juhoden jikan seigyo hosaku

Energy Technology Data Exchange (ETDEWEB)

Koyanagi, F.; Uriu, Y. [Seikei University, Tokyo (Japan)

1998-05-01

By ZEV regulation of the California government in 1990, not only the United States but also European countries and Japan are largely interested in replacing gasoline car by electric vehicle. Electric utilities expect that the electric vehicle improves the difference between the daytime and nighttime of a recent demand as a new market of electric power demand. There are some reports that indicates on the danger which generates the new peaks as the electric vehicles spread through the market in charging start hour. As the countermeasure for avoiding this problem, the authors propose that 1) inverse load flow by discharging of the contract private use EV is carried out as an energy shift in daytime, 2) the regional charging time shift method is introduced in the midnight charging time zone, in this paper. Therefore, the energy actual consumption of the automobile was investigated, and future demand was predicted by the mathematical consumption modeling. Especially, it is described a strategy of optimum introduction on scheme of effective electric vehicle for energy shift in section 2.2. And authors point out the necessity of market regulation for EV. 14 refs., 10 figs., 1 tab.

Consumer protection issues in energy: a guide for attorneys general. Insulation, solar, automobile device, home devices

Energy Technology Data Exchange (ETDEWEB)

Cohen, Harry I.; Hulse, William S.; Jones, Robert R.; Langer, Robert M.; Petrucelli, Paul J.; Schroeder, Robert J.

1979-11-01

The guide attempts to bring together two important and current issues: energy and consumer protection. Perhaps the most basic consumer-protection issue in the energy area is assuring adequate supplies at adequate prices. It is anticipated, though, that consumers will want to consider new ways to lower enegy consumption and cost, and will thus be susceptible to fraudulent energy claims. Information is prepared on insulation, solar, energy-saving devices for the home, and energy-saving devices for the automobile.

Electricity as Transportation ``Fuel''

Science.gov (United States)

Tamor, Michael

2013-04-01

The personal automobile is a surprisingly efficient device, but its place in a sustainable transportation future hinges on its ability use a sustainable fuel. While electricity is widely expected to be such a ``fuel,'' the viability of electric vehicles rests on the validity of three assumptions. First, that the emissions from generation will be significantly lower than those from competing chemical fuels whether `renewable' or fossil. Second, that advances in battery technology will deliver adequate range and durability at an affordable cost. Third, that most customers will accept any functional limitations intrinsic to electrochemical energy storage. While the first two are subjects of active research and vigorous policy debate, the third is treated virtually as a given. Popular statements to the effect that ``because 70% of all daily travel is accomplished in less than 100 miles, mass deployment of 100 mile EVs will electrify 70% of all travel'' are based on collections of one-day travel reports such as the National Household Travel Survey, and so effectively ignore the complexities of individual needs. We have analyzed the day-to-day variations of individual vehicle usage in multiple regions and draw very different conclusions. Most significant is that limited EV range results in a level of inconvenience that is likely to be unacceptable to the vast majority of vehicle owners, and for those who would accept that inconvenience, battery costs must be absurdly low to achieve any economic payback. In contrast, the plug-in hybrid (PHEV) does not suffer range limitations and delivers economic payback for most users at realistic battery costs. More importantly, these findings appear to be universal in developed nations, with labor market population density being a powerful predictor of personal vehicle usage. This ``scalable city'' hypothesis may prove to a powerful predictor of the evolution of transportation in the large cities of the developing world.

An analytic hierarchy process for benchmarking of automobile car service industry in Indian context

Directory of Open Access Journals (Sweden)

Bhupender Singh

2015-06-01

Full Text Available This paper proposes an application of Analytical Hierarchy Process (AHP to help decision maker evaluate different processes to identify the weaknesses of an automobile car service where the best alternatives and critical success factors are identified to improve their performances against the market leader. The proposed benchmarking process may help provide effective systematic decision support tool. Thus the endeavor has been made for car service industry to exhibit proposed framework by applying AHP to enhance its competitiveness. The proposed study provides an opportunity to apply to other industries in addition with a diminutive alteration.

Evaluation of Inhibitors Blends Used in Iraqi Markets for Automobile Cooling System

Directory of Open Access Journals (Sweden)

Watheq Naser Hussein

2017-08-01

Full Text Available Detection the behavior of some metals ( carbon steel and copper that are widely used in automobiles cooling system in tap water and a cooling mixture for radiators was held. The purpose of this work is to check the performance of two types of mixtures that available in Iraqi markets, viz the Kuwait mixture and the Germany one and what are known as blue water by an electrochemical technique. The experiments were held at two values of temperatures of 17 and 80 ˚C-where these values of temperature almost represent the cases of idle and operating engine. The obtained results showed that the two types of mixtures have given good inhibition efficiency for the case of steel especially in presence of Germany mixture.

APPLICATION OF FAILURE MODE & EFFECT ANALYSIS (FMEA FOR CONTINUOUS QUALITY IMPROVEMENT - MULTIPLE CASE STUDIES IN AUTOMOBILE SMES

Directory of Open Access Journals (Sweden)

Jigar Doshi

2017-06-01

Full Text Available Failure Mode and Effects Analysis (FMEA is a quality tool used to identify potential failures and related effects on processes and products, so continuous improvement in quality can be achieved by reducing them. The purpose of this research paper is to showcase the contribution of FMEA to achieve Continuous Quality Improvement (CQI by multiple case study research. The outcome research conducted by implementing FMEA; one of the Auto Core Tools (ACTs, in the automobile Small and Medium Enterprises (SMEs in Gujarat, India is presented in this paper which depict various means of Continuous Quality Improvements. The case study based research was carried out in four automobile SMEs; all of them are supplied to automotive Original Equipment Manufacturer (OEM. The FMEA was implemented with the help of Cross Functional Team (CFT to identify the potential failure modes and effects, in overall effect on Continuous Quality Improvement. The outcome of FMEA at four companies' reveals the scope of improvement exists in the manufacturing process. Implementation of those improvement points shows the definite signs of continuous improvement of the quality of process and product as well. The FMEA and subsequent implementations had reduced the quality rejections around 3% to 4% in case companies.

Learning Achievement Packages in Social Studies. Procedimientos para Manejar. Mantenimiento del Automovil. Llantas. (Procedures for Driving. Maintenance of an Automobile. Tires.)

Science.gov (United States)

Rendon, Rene

This publication presents three suggested social studies curriculum units designed for the bilingual Spanish-English classroom, but which would also be useful in advanced Spanish language classes for English speakers. The units, developed for grades 7-11, are entitled, "Procedures for Driving,""Maintenance of an Automobile,"…

CERN’s automobile fleet turns a brighter shade of green

CERN Document Server

Anaïs Vernède

2011-01-01

CERN is partnering with Services Industriels de Genève (SIG) in an environmentally friendly initiative to acquire cars running on natural gas. The first forty vehicles will arrive at CERN around mid-February, and enter service in March.   On 3 February 2011 CERN, represented by Steve Myers at the FEDRE Forum, was awarded the mobility prize. CERN currently has approximately 800 vehicles in use at its different sites. Véronique Marchal, head of Site Services in the GS Department, explains: “Our fleet includes a great variety of vehicles, from small Category A cars for staff to utility/transport vehicles. The decision to acquire cars running on natural gas is part of our strategy of diversifying CERN's automobile fleet so as to make it more environmentally friendly.” The new cars are actually bi-fuel, which means that they will have two tanks: one for regular fuel and one for compressed natural gas (CNG). “This kind of car is a little more exp...

Thermal valorisation of automobile shredder residue: injection in blast furnace.

Science.gov (United States)

Mirabile, Daphne; Pistelli, Maria Ilaria; Marchesini, Marina; Falciani, Roberta; Chiappelli, Lisa

2002-01-01

Wastes with residual heating value, according to the trend of the world legislation, could be thermally reused. The present study is conducted to verify the possibility of thermal valorisation of a waste, denominated fluff, by injection in blast furnace. The fluff, arising from the automobile shredder operations, is a waste characterised by a high organic matrix and is potentially dangerous due to the heavy metals, oils filter and halogenated plastics content. The first step of the work is the chemical, physical and toxicological characterisation of this material. Then the fluff injection in a blast furnace tuyere is theoretically analysed with a mathematical model. Finally, experimental trials are conducted in a pilot plant, simulating the most important part of the blast furnace: the raceway, in order to analyse process and industrial aspects. In view of an industrial application a first economical evaluation is carried out on the basis of model and experimental results.

Laser surface modification of electrically conductive fabrics: Material performance improvement and design effects

Science.gov (United States)

Tunakova, Veronika; Hrubosova, Zuzana; Tunak, Maros; Kasparova, Marie; Mullerova, Jana

2018-01-01

Development of lightweight flexible materials for electromagnetic interference shielding has obtained increased attention in recent years particularly for clothing, textiles in-house use and technical applications especially in areas of aircraft, aerospace, automobiles and flexible electronics such as portable electronics and wearable devices. There are many references in the literature concerning development and investigation of electromagnetic shielding lightweight flexible materials especially textile based with different electrically conductive additives. However, only little attention is paid to designing and enhancing the properties of these special fabrics by textile finishing processes. Laser technology applied as a physical treatment method is becoming very popular and can be used in different applications to make improvement and even overcome drawbacks of some of the traditional processes. The main purpose of this study is firstly to analyze the possibilities of transferring design onto the surface of electrically conductive fabrics by laser beam and secondly to study of effect of surface modification degree on performance of conductive fabric including electromagnetic shielding ability and mechanical properties. Woven fabric made of yarns containing 10% of extremely thin stainless steel fiber was used as a conductive substrate.

Productivity Growth in the Automobile Industry, 1970-1980: A Comparisonof Canada, Japan and the United States

OpenAIRE

Melvyn A. Fuss; Leonard Waverman

1985-01-01

In this paper we calculate and analyze the automobile industries cost and productivity experience during the 1970 's in Canada, the U.S.and Japan. Utilizing an econometric cost function methodology, we are able to isolate the major source of short-run disequilibrium in this industry-variations' in capacity utilization-and analyze its effects on cost and total factor productivity (TFP) gross. This is achieved through a novel application of the Viner-Wng envelope theorem, which allows us to tra...

Reliability of solid-state lighting electrical drivers subjected to WHTOL accelerated aging

Energy Technology Data Exchange (ETDEWEB)

Lall, Pradeep; Sakalauku, Peter; Davis, Lynn

2014-05-27

An investigation of a solid-state lighting (SSL) luminaire with the focus on the electronic driver which has been exposed to a standard wet hot temperature operating life (WHTOL) of 85% RH and 85°C in order to assess reliability of prolonged exposer to a harsh environment has been conducted. SSL luminaires are beginning introduced as head lamps in some of today's luxury automobiles and may also be fulfilling a variety of important outdoor applications such as overhead street lamps, traffic signals and landscape lighting. SSL luminaires in these environments are almost certain to encounter excessive moisture from humidity and high temperatures for a persistent period of time. The lack of accelerated test methods for LEDs to assess long-term reliability prior to introduction into the marketplace, a need for SSL physics based PHM modeling indicators for assessment and prediction of LED life, as well as the U.S. Department of Energy's R&D roadmap to replace todays lighting with SSL luminaires makes it important to increase the understanding of the reliability of SSL devices, specifically, in harsh environment applications. In this work, a set of SSL electrical drivers were investigated to determine failure mechanisms that occur during prolonged harsh environment applications. Each driver consists of four aluminum electrolytic capacitors (AECs) of three different types and was considered the weakest component inside the SSL electrical driver. The reliability of the electrical driver was assessed by monitoring the change in capacitance and the change in equivalent series resistance for each AEC, as well as monitoring the luminous flux of the SSL luminaire or the output of the electrical driver. The luminous flux of a pristine SSL electrical driver was also monitored in order to detect minute changes in the electrical drivers output and to aid in the investigation of the SSL luminaires reliability. The failure mechanisms of the electrical drivers have been

Lead on vegetation as indicator of air pollution due to automobile exhaust's gases

Energy Technology Data Exchange (ETDEWEB)

Impens, R; Deroanne-Bauvin, J; Tilman, J

1974-01-01

Lead is regarded as an undesirable air contaminant. It's effects on health are well documented. Lead levels in air are very high in cities. Analyses have been performed on soils and urban vegetation (trees, shrubs and plants growing in city parks or near urban highways) from fifteen sites in Brussels. The collections were made from 72 to actually, at each site. The sites gave a very wide range of traffic density. A very significant correlation of lead concentration with density and characteristics of urban traffic was found. A continuous survey of lead levels on vegetation is a good indicator of air pollution caused by automobile exhaust's gases in urban and suburban areas.

Contribution of Road Grade to the Energy Use of Modern Automobiles Across Large Datasets of Real-World Drive Cycles: Preprint

Energy Technology Data Exchange (ETDEWEB)

Wood, E.; Burton, E.; Duran, A.; Gonder, J.

2014-01-01

Understanding the real-world power demand of modern automobiles is of critical importance to engineers using modeling and simulation to inform the intelligent design of increasingly efficient powertrains. Increased use of global positioning system (GPS) devices has made large scale data collection of vehicle speed (and associated power demand) a reality. While the availability of real-world GPS data has improved the industry's understanding of in-use vehicle power demand, relatively little attention has been paid to the incremental power requirements imposed by road grade. This analysis quantifies the incremental efficiency impacts of real-world road grade by appending high fidelity elevation profiles to GPS speed traces and performing a large simulation study. Employing a large real-world dataset from the National Renewable Energy Laboratory's Transportation Secure Data Center, vehicle powertrain simulations are performed with and without road grade under five vehicle models. Aggregate results of this study suggest that road grade could be responsible for 1% to 3% of fuel use in light-duty automobiles.

Report on commissioned business for fiscal 1997. Development of new power storage system for cells and development of technology for distributed power storage (research for a zinc/air cell system for automobiles); 1997 nendo itaku gyomu hokokusho. Shingata denchi denryoku chozo system kaihatsu bunsangata denryoku chozo gijutsu kaihatsu (denki jidoshayo aen kuki denchi system chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Concerning the above, it is discussed whether such a system is feasible in Japan. A zinc/air cell system requires some special plants for zinc regeneration, etc. It is necessary to build a zinc refining plant and to install dozens of electrode replacing facilities in an area dozens of kilometers in diameter with the plant at the center. For such a system to be functional, there have to be several tens of thousands of automobile users in a limited area. In Japan, so large a number will not be found anywhere even if the appeal is directed to those in the postal service and electric utilities. There will be no economic success in Japan, different from in Germany. As for the economic comparison between a zinc/air cell system and natural gas system, the two will be equivalent to each other as far as the use of the quick filling stations for the natural gas automobiles remains as it is. When the number in consideration is so large as several tens of thousands, however, the natural gas system will turn out to be economically superior to the zinc/air cell system. 19 figs., 29 tabs.

Investigations into the effect of automobile exhausts on the phenology, periodicity and productivity of some roadside trees

Directory of Open Access Journals (Sweden)

Ghulam Bhatti

2014-01-01

Full Text Available In response to a polluted atmosphere, the phenology of Ficus benyalensis and Eucalyptus sp. was highly affected. The yield of seeds and fruits of Gunincun officinale and Azadirachta indica was lessened at the polluted sites. The automobile emissions significantly reduced the productivity in G. officinale, F. bengalensis and Eucalyptus sp., whereas, A. indica was comparatively resistant to vehicle exhaust pollution. Leaf area and dry weight were significantly reduced in most of the plants.

The Next Industrial Revolution Industry 4.0

CSIR Research Space (South Africa)

Sanne, Martin

2017-01-01

Full Text Available transport Contour Crafted Houses Driverless everything Electric everything Bio Factories Micro Colleges Smart Homes/buildings Home Delivery 24 Hour Cities Senior Living Digitalization Photography Automobiles Electricity Airplanes Telephones...

Ethanol as an Alternative Fuel for Automobiles: Using the First Law of Thermodynamics to Calculate the "Corn-Area-per-Car" Ratio

Science.gov (United States)

Pietro, William J.

2009-01-01

Students will use the first law of thermodynamics to determine the feasibility of using corn ethanol as an alternative to fossil fuels in automobiles. Energy flow is tracked from the Sun, to photosynthesized carbohydrate, to ethanol through fermentation, and finally to work in the combustion engine. Feasibility is gauged by estimating a…

Thoughts about automotive industry in 2050 with respect to the objective of division by 4 of CO{sub 2} emissions; Reflexions sur l'automobile de 2050 face a l'objectif de division du CO{sub 2} par le facteur 4

Energy Technology Data Exchange (ETDEWEB)

Douaud, A.

2005-07-01

The long-term strategy of the automotive industry is to minimize its CO{sub 2} emissions and to progressively abandon petroleum. Today, the diesel technology is the most efficient in terms of CO{sub 2} emissions and the hybrid technology will be the medium-term challenge with the development of biofuels and synthetic fuels from biomass. According to the author, there is no certitude that the hydrogen fuel cell will be tomorrows' automobile engine and the nuclear option would be necessary to produce huge quantities of hydrogen without CO{sub 2} emissions. The alternate strategies with interesting potentialities remain the electric-powered vehicle supplied with batteries or supplied with methanol fuel cells, methanol being obtained by biomass transformation. (J.S.)

Study of lead pollution from automobile emissions in Khartoum

International Nuclear Information System (INIS)

Ibrahim, A.S.

2002-07-01

Aerosol and soil samples were collected from places near the main roads in Khartoum area. The samples were analyzed by energy Dispersive x-ray fluorescence (EDXRF) technique, to study the lead (Pb) concentration in air and soil near roadsides due to automobile emissions. The aim of the study was also to make a comparison with the results of previous measurements made in the same field (Ahmed, 1983) . Thee aerosol samples were taken from three sites in Khartoum area. Tuti island taken as a control area, central Khartoum as a commercial area and south of Khartoum as a residential area. Soil samples were taken from a place near Al Gurashi Park and another near Abu Hamama traffic junction in Khartoum area. The data obtained of (Pb) concentrations in the roadside air were statistically analyzed. Comparisons were made between the concentrations at the various times of the day and correlation were made with meteorological parameters. The (Pb) concentrations in the roadside soil were observed to be inversely proportional to the distance from the road and the depth from the layer of the earth. Finally, the results obtained are discussed and some recommendations are suggested. (Author)

Mobile test stand for evaluation of electric power plants for unmanned aircraft

Directory of Open Access Journals (Sweden)

Serbezov Vladimir

2017-01-01

Full Text Available The absence of accurate performance data is a common problem with most civilian unmanned aerial vehicle (UAV power plant producers. The reasons for this are the small size of most of the manufacturers and the high price of precise wind tunnel testing and computer simulations. To overcome this problem at Dronamics Ltd., with support from the Department of Aeronautics of TU-Sofia, a mobile test stand for evaluation of electric power plants for unmanned aircraft was developed. The stand may be used statically, or may be installed on the roof of an automobile. The measurement system of the stand is based on popular hardware that is used in radio controlled models and in general automation. The verification of the measurement system is performed by comparing static test results with data published by the manufacturer of the tested electric motor. Tests were carried out with 2 different types of propellers and the results were compared with published results for common propellers as well as with results of theoretical studies. The results are satisfactory for practical applications. The use of this type of test stands can be a cheap and effective alternative for research and development start-up companies like Dronamics.

40 CFR 600.301-08 - General applicability.

Science.gov (United States)

2010-07-01

... automobiles and light trucks may optionally comply with the electric vehicle requirements in this subpart. [71... optionally comply with the provisions of this subpart. (b)(1) Manufacturers that produce only electric... sections pertaining specifically to electric vehicles. (2) Manufacturers with worldwide production...

As manifestações da sustentabilidade ambiental na publicidade da indústria automobilística brasileira

OpenAIRE

Helio Pedro da Silva

2012-01-01

A presente pesquisa tem por objetivo estudar a maneira como a indústria automobilística brasileira tem abordado a sustentabilidade ambiental nos seus discursos publicitários. A iniciativa de lançar o olhar sobre tal dimensão da comunicação das marcas foi motivada, particularmente, pelos sentidos antagônicos projetados pelo bem automóvel na sociedade contemporânea. Por um lado, admirado como meio de transporte e mobilidade, e viabilizador de variadas expressões identitárias. E, por outro, crit...

THE EFFECT OF GASOLINE-LIKE FUEL PRODUCED FROM WASTE AUTOMOBILE TIRES ON EMISSIONS IN SPARK-IGNITION ENGINES

OpenAIRE

ÖZTOP, H. F.; VAROL, Y.; ALTUN, Ş.; FIRAT, M.

2016-01-01

In the present paper, the effect of Gasoline-Like Fuel (GLF) on emissions was investigated for direct injection spark-ignited engine. The GLF was obtained from waste automobile tires by using the pyrolysis. The tires are installed to oven without any procedure such as cutting, melding etc. Obtained GLF was then used in a four-cylinder, four-stroke, water-cooled and direct injection spark-ignited engine as blended with unleaded gasoline from 0% to 60% with an increment of 10%. Engine tests res...

Preliminary Investigation on Generation of Electricity Using Micro Wind Turbines Placed on A Car

Directory of Open Access Journals (Sweden)

Yogendra Chaudhary

2017-03-01

Full Text Available Wind energy is one of the prominent resources for renewable energy and it is traditionally extracted using stationary wind turbines. However, it can also be extracted using mini or micro wind turbines on a moving body, such as an automobile, while cruising at high speeds on freeways. If the electricity is produced using air flowing around the vehicle without affecting aerodynamic performance of the vehicle, it can be used to charge up the battery or power up additional accessories of the vehicle. For the first time, in the present work, a preliminary investigation was carried out to generate electricity by utilizing air flow on a moving car. Initially, a correlation between the car speed and wind velocity was established using an anemometer. Placing a set of two micro wind turbines along with two micro generators on the rear end of the car trunk, the present study investigated the feasibility of generating electricity from these micro wind turbines while evaluating the effect of drag force on the performance of the car through the experimental approach and computational fluid dynamics (CFD simulations. Both approaches confirmed negligible effect of drag force on the vehicle performance in terms of gas mileage and changes in drag coefficient values. Following these studies, the micro wind turbines were also tested for electricity generation at various cruising speeds of the car ranging from 50 to 80 mph on the freeways. The voltage and power generated always showed an increasing trend with increasing the car speed, however they saturated when a cut off limit was setup with the voltage controllers. A maximum voltage of 3.5 V and a maximum current of 0.8 A were generated by each micro wind turbine when a cut off limit was used along with a load consisting of four LED bulbs in parallel with 3.5 V and 0.2 A rating each. On the other hand, when the tests were repeated without using the cut-off limit, a maximum voltage of 18.91 V and a maximum current

Influence of plug-in hybrid electric vehicles on smart grids; Management der Trendwatching Group. Einfluss von Plug-In Hybrid Vehicles auf intelligente Verteilnetze (Smart Grids) - Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Horbaty, R. [ENCO Energie Consulting AG, Bubendorf (Switzerland); Strub, P. [Pierre Strub, Basel (Switzerland)

2008-12-15

This final report for the Swiss Federal Office of Energy (SFOE) takes a look at the influence of plug-in hybrid vehicles on intelligent electricity distribution grids. The work of a trend-watching group which examined the regulatory services at the interface between such 'smart' grids and electrically powered vehicles is reported on. The trend-watching group includes research institutes, energy suppliers, NGOs, the automobile industry and technology companies. Vehicle-to-grid concepts and innovative developments in the Swiss market are commented on and the group's own activities (research, business models, technological development and politics) are discussed. The group will accompany relevant research programs and the implementation of measures as well as accompanying feasibility evaluations concerning current market developments. The Swiss federal strategy is to be discussed and international co-operation (with the IEA) is to be further strengthened.

Nuclear power and carbon dioxide free automobiles

International Nuclear Information System (INIS)

Pendergast, D.R.

1999-01-01

Nuclear energy has been developed as a major source of electric power in Canada. Electricity from nuclear energy already avoids the emission of about 100 million tonnes of carbon dioxide to the atmosphere in Canada. This is a significant fraction of the 619 million tonnes of Canadian greenhouse gas emissions in 1995. However, the current scope of application of electricity to end use energy needs in Canada limits the contribution nuclear energy can make to carbon dioxide emission reduction. Nuclear energy can also contribute to carbon dioxide emissions reduction through expansion of the use of electricity to less traditional applications. Transportation, in particular contributed 165 million tonnes of carbon dioxide to the Canadian atmosphere in 1995. Canada's fleet of personal vehicles consisted of 16.9 million cars and light trucks. These vehicles were driven on average 21,000 km/year and generated 91 million tonnes of greenhouse gases expressed as a C02 equivalent. Technology to improve the efficiency of cars is under development which is expected to increase the energy efficiency from the 1995 level of about 10 litres/100 km of gasoline to under 3 litres/100km expressed as an equivalent referenced to the energy content of gasoline. The development of this technology, which may ultimately lead to the practical implementation of hydrogen as a portable source of energy for transportation is reviewed. Fuel supply life cycle greenhouse gas releases for several personal vehicle energy supply systems are then estimated. Very substantial reductions of greenhouse gas emissions are possible due to efficiency improvements and changing to less carbon intensive fuels such as natural gas. C02 emissions from on board natural gas fueled versions of hybrid electric cars would be decreased to approximately 25 million t/year from the current 91 million tonnes/year. The ultimate reduction identified is through the use of hydrogen fuel produced via electricity from CANDU power

Local Design & Global Dreams

DEFF Research Database (Denmark)

Christensen, Poul Rind; H. Andersen, Poul; Linneberg, Mai

Electric cars hold the potential to completely alter the interrelationship among actors in the automobile industry architecture. As such they may not only be able to alleviate environmental externalities but also revolutionise the automobile industry as such. This paper is concerned...... with the processes of industry creation for the electric car industry, which is a particular fascinating topic matter as it allows the analysis to provide an understanding of the processes of innovation and of some of its inventors in concert. In continuation of this, the aim of this paper is to describe and analyse...... which emergent business models and corresponding value capturing capabilities can be found in the emerging market for electric cars....

40 CFR 600.301-95 - General applicability.

Science.gov (United States)

2010-07-01

... passenger automobiles and light trucks may optionally comply with the electric vehicle requirements in this... produce only electric vehicles are exempt from the requirement of this subpart, except with regard to the requirements in those sections pertaining specifically to electric vehicles. (2) Manufacturers with worldwide...

Removal of oil and grease from automobile garage wastewater using electrocoagulation

Science.gov (United States)

Manilal, A. M.; Harinarayanan Nampoothiri, M. G.; Soloman, P. A.

2017-06-01

Wastewater from automobile garages and workshops is an important contributor to the water pollution. Oil and grease is one of the major content of wastewater from vehicle garages. Wastewater from a public transport depot at Thrissur district in Kerala, India was collected for the study. A batch reactor has been devised to assess the efficacy of electrocoagulation in removing oil and grease from the wastewater. Aluminium and iron were tested as the anode material with stainless steel as cathode. Experiments were conducted to investigate the effect of various operating parameters such as current density, pH, time and salt concentration on oil and grease removal. The results shown that aluminium is superior to iron in removing the oil and grease from the wastewater. The reactor with aluminium as anode was able to remove 90.8 % of the oil and grease at a current density of 0.6 A/dm2 in 15 minutes. The calculated specific energy consumption is also less for aluminium in comparison with iron.

Collection and analysis of the information related to the research theme of the IEA-GHG phase 3 program; IEA-GHG phase 3 program no kenkyu theme kanren joho no shushu to bunseki gyomu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The survey on the reduction measures against greenhouse effect gases was carried out which was proposed by the IEA-GHG phase 3 program. In Japan, various low emission vehicles (LEV) such as electric, methanol and natural gas vehicles are under rapid development. Like France, cost reduction and preparation of fuel filling stations are urgently necessary for the diffusion of LEVs. In New Zealand, air pollution by automobiles is not essential. The Switzerland government is promoting the diffusion of compact electric vehicles, and inhibits the use of conventional automobiles in some tourist resorts. The California state is leading the world by prescribing the bold regulation for preventing the air from pollution. In particular, the state government put automobile manufacturers under an obligation to produce zero emission vehicles (ZEV, electric vehicle) by 2% of passenger cars and trucks from 1998 and to increase ZEVs up to 10% until 2010. This report also includes two papers concerned, `Forestry management for sustainable development` and `Tropical forestry action plan after five years.` 142 refs., 19 figs., 23 tabs.

FY 1974 report on the results of the Sunshine Project. Comprehensive study of hydrogen use subsystem and study on the periphery technology (Study on automobile engine); 1974 nendo suiso riyo subsystem no sogoteki kento to shuhen gijutsu ni kansuru kenkyu seika hokokusho. Jidosha engine ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-05-10

The paper made an investigational study of the data of a wide range which seems to be related to the use of hydrogen as automobile use fuel. The advantage is that the exhaust can almost be non-pollutant. The engine performance can be on the same level as that of the present gasoline engine or can be improved. The reasons are that the compression rate is heightened and that automobile can be driven at lean mixture rate. As to weak points, the volume and weight increase when it is loaded on vehicle. The cost of hydrogen is higher than that of petroleum. The problems to be quickly solved are as follows. Improvement of the combustion method: a wide range of development not only the electric ignition method, but the diesel method, and the basic study for it. It is necessary to establish the basis for a method to connect the storage method and engine. It is also necessary to comprehensively review rules related to safety. For the future, the conversion to artificial fuel is indispensable, and hydrogen has the most characteristics as energy medium. The problem is much larger sizes of fuel tank and pump, but there will be a possibility of producing a new technology together with the hydrogen production technology. The fundamental research should be promoted without any hesitation. (translated by NEDO)

Aspects économiques de l'industrie automobile dans le monde Economic Aspects of the Auto-Motive Industry in the World

Directory of Open Access Journals (Sweden)

Valais M.

2006-11-01

Full Text Available Cette étude décrit les caractéristiques et les implications économiques les plus importantes de l'industrie automobile dans le monde. Après avoir situé l'importance des grands pays constructeurs mondiaux par leurs productions, leurs parcs et leurs échanges, la situation de la France est étudiée plus particulièrement. Cette analyse plus fine montre la structure et aussi les relations de l'industrie automobile française avec son marché, ses concurrents extérieurs, l'économie nationale tout entière et celle de ses utilisateurs. This survey covers the most important features and economic implications of the automotive industry in the world. After situating the positions of the leading worldwide manufacturers with regard to their output, the number of their vehicles in use and their foreign trade, special attention is paid to the situation of France. This closer analysis shows the structure of the automotive industry as well as its relations with its market, its foreign markets, the national economy as a whole and that of its users.

Ergonomic study of biorhythm effect on the 62 occurrence of human errors and accidents in automobile manufacturing industry

OpenAIRE

2012-01-01

Background and Aim: According to the biorhythm theory when the phase shift from positive to negative and vice versa people experience a critical an unstable day that prone them to error and accident. The purpose of this study is to determine this relationship in one of the automobile manufacturing industry. . Materials and Methods: At first 1280 person incident entered the study was reviewed and then the critical days of each biological cycle was determined using the software Easy Biorh...

Determination of Polycyclic Aromatic Hydrocarbons in Automobile Exhaust by Means of High-Performance Liquid Chromatography with Fluorescence Detection

DEFF Research Database (Denmark)

Nielsen, Tom

1979-01-01

A chromatographic method has been developed and applied to the determination of polycyclic aromatic hydrocarbons (PAHs) in particulate matter in automobile exhaust, in petrols, and in crankcase oils. The PAHs were purified from other organic compounds by thin-layer chromatography, separated by high......-performance liquid chromatography, and measured by means of on-line fluorescence detection. The identities of the PAHs were verified by comparing the emission spectra obtained by a stop-flow technique with those of standard PAHs...

Development of electrostatic charging evaluation equipment for automobile seat; Jidoshayo seat no taidensei shiken hyoka sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Maeda, K [Mazda Motor Corp., Hiroshima (Japan)

1997-10-01

When passengers get out of vehicle, electrostatics is generated by separation of seat cloth and passenger cloth, and then charged to passenger`s body. It has been impossible for us to simulate this induction charging phenomenon with current evaluation equipments. We developed a new seat cloth evaluation equipments using induction charging plate, which enables us to simulate the phenomenon. This paper describes this new electrostatic charging evaluation method for automobile seat cloth. 5 refs., 6 figs.

Impact of electric range and fossil fuel price level on the economics of plug-in hybrid vehicles and greenhouse gas abatement costs

International Nuclear Information System (INIS)

Özdemir, Enver Doruk; Hartmann, Niklas

2012-01-01

In this paper, the energy consumption shares of plug-in hybrid vehicles (PHEVs) for electricity from the grid and conventional fuel depending on electric driving range are estimated. The resulting mobility costs and greenhouse gas (GHG) abatement costs per vehicle kilometer for the year 2030 are calculated and optimal electric driving range (which indicates the size of the battery) is found for different oil price levels with the help of a MATLAB based model for a typical compact passenger car (e.g. VW Golf). The results show that the optimum electric driving range for minimum mobility costs of a PHEV is between 12 and 32 km. Furthermore, optimum GHG abatement costs are achieved with an electric driving range between 16 and 23 km. These results are considerable lower than most market ready PHEVs (electric driving range of 50 to 100 km), which shows that the automobile industry should concentrate on shorter electric driving range for PHEVs in the near future to offer cost optimum mobility and low GHG abatement costs. However, the oil price level and the consumer driving habits impact heavily on the cost performance as well as the optimum electric driving range of plug-in hybrid vehicles. - Highlights: ► We analyze the energy consumption (and share of grid electricity) of plug-in hybrid vehicles. ► We analyzed the mobility costs and GHG abatement costs depending on electric driving range. ► Mobility costs of plug-in hybrid vehicles can be lower than those of conventional diesel vehicles in 2030. ► The optimum mobility costs are achieved with the electric driving range between 12 and 32 km. ► The optimum GHG abatement costs are achieved with the electric driving range between 16 and 23 km.

The electric car controversy. A social-constructivist interpretation of the California zero-emission vehicle mandate

Energy Technology Data Exchange (ETDEWEB)

Fogelberg, H

1998-07-01

This study focuses the socio-technical dynamics of the attempted reintroduction of electric cars in California. The underlying question is whether or not it is possible to open up an entrenched technological area as car technology, and achieve a radical change. With the perspectives of social constructivist approaches to technological change, this study examines how a large technological controversy was initiated by regulatory action of the air agency in California, the California Air Resources Board, how this controversy developed and stabilized, and how it was ended by the air agency and the auto industry. Based on mainly secondary sources, the definitions that were established on electric cars and gasoline cars at the turn of the 20th century are highlighted, thus showing the existence of two types of automobiles: the city car and the endurance car. The city car did not survive, and was not defined as being a real car. Based on mainly primary sources, the recent electric car controversy is examined, suggesting that the air agency could not force the car industry to re-introduce the city car, and consequently the efforts were directed towards the development of more advanced batteries that could give the electric car a performance close to that of the gasoline car. It also display that electric car technology was enhanced due to the mandate. In ending the controversy, the agency, due to political forces, changed from 'command-and-control' to a 'partnership' strategy. The California Air Resources Board postponed the mandate (from 1998 to 2003), due to the fact that large volume production of advanced batteries was not expected to be in place by 1998. This regulatory relief removed the principal obstacle on behalf of auto manufacturers of not to accept mandated markets, and led General Motors to start to market their purpose built electric sports car by late 1996, and Toyota to promote electric- and electric hybrid car technologies. Thus car technology was re-opened.

The electric car controversy. A social-constructivist interpretation of the California zero-emission vehicle mandate

Energy Technology Data Exchange (ETDEWEB)

Fogelberg, H.

1998-07-01

This study focuses the socio-technical dynamics of the attempted reintroduction of electric cars in California. The underlying question is whether or not it is possible to open up an entrenched technological area as car technology, and achieve a radical change. With the perspectives of social constructivist approaches to technological change, this study examines how a large technological controversy was initiated by regulatory action of the air agency in California, the California Air Resources Board, how this controversy developed and stabilized, and how it was ended by the air agency and the auto industry. Based on mainly secondary sources, the definitions that were established on electric cars and gasoline cars at the turn of the 20th century are highlighted, thus showing the existence of two types of automobiles: the city car and the endurance car. The city car did not survive, and was not defined as being a real car. Based on mainly primary sources, the recent electric car controversy is examined, suggesting that the air agency could not force the car industry to re-introduce the city car, and consequently the efforts were directed towards the development of more advanced batteries that could give the electric car a performance close to that of the gasoline car. It also display that electric car technology was enhanced due to the mandate. In ending the controversy, the agency, due to political forces, changed from 'command-and-control' to a 'partnership' strategy. The California Air Resources Board postponed the mandate (from 1998 to 2003), due to the fact that large volume production of advanced batteries was not expected to be in place by 1998. This regulatory relief removed the principal obstacle on behalf of auto manufacturers of not to accept mandated markets, and led General Motors to start to market their purpose built electric sports car by late 1996, and Toyota to promote electric- and electric hybrid car technologies. Thus car

The effect of three ergonomics training programs on the prevalence of low-back pain among workers of an Iranian automobile factory: a randomized clinical trial.

Science.gov (United States)

Aghilinejad, M; Bahrami-Ahmadi, A; Kabir-Mokamelkhah, E; Sarebanha, S; Hosseini, H R; Sadeghi, Z

2014-04-01

Many workers suffer from low-back pain. Type and severity of spinal complaints have relationship with work load. Lack of adherence to ergonomics recommendations among the important causes of low-back pain. To assess the effect of 3 ergonomics training programs on the prevalence of lowback pain among workers of an Iranian automobile factory. In a parallel-design 4-arm randomized clinical trial, 760 active workers of an automobile factory were studied. 503 workers were found eligible and randomized into 3 intervention groups (n=252), and a control group (n=251). The intervention groups consisted of 3 arms: 84 workers were educated by pamphlet, 84 by lectures, and 84 by workshop. Nordic questionnaire was used to determine the prevalence of spinal complaint before and 1-year after the interventions. The trial is registered with the Iranian Randomized Clinical Trial Registry, number IRCT2013061213182N2. Out of 503 workers, 52 lost to follow-up leaving 451 workers for analyses. The prevalence of low-back pain at the baseline was not significantly different among the studied arms. 1-year after the interventions, the prevalence did not change significantly from the baseline values for the lecture and pamphlet group. However, the prevalence of LBP experienced during the last year significantly (p=0.036) decreased from 42% to 23% in participant took part in the workshop. Training of automobile factory workers in ergonomics is more effective by running workshop than giving lecture or disseminating pamphlet.

A comparative study among the three wheeler automobile drivers on pulmonary function tests in adult males of Gulbarga city

Directory of Open Access Journals (Sweden)

Afshan Afroz, Salgar Veeresh B, Sugoor Manjushree, Swati I Amrutha

2013-01-01

Full Text Available Development of our country has led to rapid urbanization and there is increasing use of automobiles that is aggravating environmental pollution. Occupational exposure to automobile exhaustand industrial smokes has been shown to affect functioning of different systems of the body. The present study was taken up to assess the Pulmonary Function Tests (PFT in auto rickshaw drivers of Gulbargacity. Methods: Fifty non –smoker male auto drivers in the age group of 20–50 years for more than 5 years of auto driving experience formed the study group. Age and sex matched individuals not exposed to auto rickshaw driving [administrative staff] formed the control group. Pulmonary function parametersFVC, FEV1, FEV1%, PEFR, PIFR, FEF25-75, FEF50 and MVV were assessed using a computerized Spiro meter during their working hours and were statistically analyzed. Results: There was a highly significant decrease in FVC and FEV1 in the study group compared to control group. The decrease in FEV1%, PIFR, FEF25-75 and FEF50 were statistically significant but the decrease in PEFR and MVV were statistically nonsignificant. Conclusion: Our findings point towards the adverse effects of vehicle exhaust on lung functions, mainly on lower airways with restrictive pattern of disease.

POUR UNE HISTOIRE DE L'AUTOMOBILE INSÉRÉE DANS LA SOCIÉTÉ (FRANÇAISE)

OpenAIRE

Lejeune , Dominique

2016-01-01

Licence; Schématiquement, l'histoire des constructeurs automobiles voit, d'après Jean-Louis Loubet, se succéder le temps des pionniers (jusqu'en 1914), le temps des ingénieurs (± années 20), le temps des crises (1929-1945), le temps de la production de masse (1945-1955), la notion ayant été inventée par Henry Ford et imaginée pour la France par André Citroën dans les années 20, le temps des vingt glorieuses (1955-1974), le temps des illusions (1974-v. 1982) et le temps du renouveau (v. 1982-)...

Strategic Materials in the Automobile: A Comprehensive Assessment of Strategic and Minor Metals Use in Passenger Cars and Light Trucks.

Science.gov (United States)

Field, Frank R; Wallington, Timothy J; Everson, Mark; Kirchain, Randolph E

2017-12-19

A comprehensive component-level assessment of several strategic and minor metals (SaMMs), including copper, manganese, magnesium, nickel, tin, niobium, light rare earth elements (LREEs; lanthanum, cerium, praseodymium, neodymium, promethium, and samarium), cobalt, silver, tungsten, heavy rare earth elements (yttrium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, and lutetium), and gold, use in the 2013 model year Ford Fiesta, Focus, Fusion, and F-150 is presented. Representative material contents in cars and light-duty trucks are estimated using comprehensive, component-level data reported by suppliers. Statistical methods are used to accommodate possible errors within the database and provide estimate bounds. Results indicate that there is a high degree of variability in SaMM use and that SaMMs are concentrated in electrical, drivetrain, and suspension subsystems. Results suggest that trucks contain greater amounts of aluminum, nickel, niobium, and silver and significantly greater amounts of magnesium, manganese, gold, and LREEs. We find tin and tungsten use in automobiles to be 3-5 times higher than reported by previous studies which have focused on automotive electronics. Automotive use of strategic and minor metals is substantial, with 2013 vehicle production in the United States, Canada, EU15, and Japan alone accounting for approximately 20% of global production of Mg and Ta and approximately 5% of Al, Cu, and Sn. The data and analysis provide researchers, recyclers, and decision-makers additional insight into the vehicle content of strategic and minor metals of current interest.

Alternative drives for motor cars. Hybrid systems, fuel cells, alternative energy sources. 3. ed.; Alternative Antriebe fuer Automobile. Hybridsysteme, Brennstoffzellen, alternative Energietraeger

Energy Technology Data Exchange (ETDEWEB)

Stan, Cornel [California Univ., Berkeley, CA (United States); Paris-1 Univ., 75 (France); Pisa Univ. (Italy); Perugia Univ. (Italy); Kronstadt Univ. (Russian Federation)

2012-07-01

This book describes and assesses on the basis of the latest research and development projects worldwide what the possibilities are for the realisation of future drive concepts, ranging from battery-driven electromotors to hybrid systems combining electromotor and combustion engine to alternative energy resources such as hydrogen or alcohol. Power density, torque band, acceleration characteristics, specific energy consumption and chemical and noise emissions are the most important criteria for assessing the quality of a drive configuration. The boundary conditions for the introduction of alternative automotive drives are determined by the availability or production characteristics and the storability of the energy resources in question as well as by the degree of technical complexity, costs, safety, infrastructure and service. This book provides an updated overview and analysis of the processes, prime movers and energy resources that can be combined in complex energy management systems for automobiles. Up-to-date information of this kind is indispensable for the development of new concepts. The contents in overview: current data and facts on the development of new concepts; compact overview and analysis of processes, prime movers and energy resources; methods and solutions in designing alternative drives. [German] Die Realisierungsmoeglichkeiten zukuenftiger Antriebskonzepte - von batteriebetriebenen Elektromotoren und Hybridsystemen bestehend aus Elektro- und Verbrennungsmotor ueber Brennstoffzellen bis hin zu alternativen Energietraegern wie Wasserstoff oder Alkohol - werden auf Basis neuesten Forschungs- und Entwicklungsarbeiten weltweit praesentiert und bewertet. Leistungsdichte, Drehmomentverlauf, Beschleunigungscharakteristik, spezifischer Energieverbrauch sowie Emission chemischer Stoffe und Geraeusche sind wichtige Merkmale zur Beurteilung der Qualitaet einer Antriebskonfiguration. Die Verfuegbarkeit oder die Herstellungsmerkmale sowie die Speicherfaehigkeit

Governments’ Interventions into the Real Economy under WTO Law Revisited: New Tendencies of Governmental Support of the Automobile Industry

OpenAIRE

Weber, Rolf H.; Grosz, Mirina

2009-01-01

The automobile industry has received unprecedented governmental support during the ongoing economic crisis. Rescue packages have been provided to sustain the significant market branch and asserted key driver of growth, export, innovation, and jobs particularly in the EU and the United States and to avoid further downward spirals, which risk affecting the national economies on a wider scale. Since such tendencies can have trade distorting effects, however, the question arises whether the incre...

Hybrid electric vehicle thermal management and study of the power electronics cooling; Gestion thermique du vehicule hybride et etude du refroidissement de l'electronique de puissance

Energy Technology Data Exchange (ETDEWEB)

Rouaud, C.

2004-07-01

For decreasing the engine's consumption and pollutant emissions, automobile makers are developing hybrid electric vehicles incorporating an electric motor and power electronics leading to new under-hood thermal constraints. This is why we first present the tests results of a new common cooling circuit for all the vehicle components. With the aim of developing new energy management strategies between the components, we have chosen the nodal method to simulate the thermal behaviour of the engine, the electric motor, the power electronics and the cooling circuit. The second part of this thesis deals with a thermal-hydraulic analysis of several power electronics cooling methods, which has led us to choose the multiple jet impingement cooling. Several tests have been made for characterising the performances of this technique and enabled us to establish an optimal configuration. The last part shows the thermal simulation results run with the help of an innovative reduction method of thermal models applied to the power electronics. This technique allowed us to have a low cost of time simulation and will permit, in the future, the real-time control of the hybrid electric vehicle components. (author)

40 CFR Appendix A to Subpart IIIi... - Determination of Capture Efficiency of Automobile and Light-Duty Truck Spray Booth Emissions From...

Science.gov (United States)

2010-07-01

... captured and delivered to the control device by the fraction of coating sprayed in the spray booth that is... Emission Rate of Automobile and Light-Duty Truck Topcoat Operations,” EPA-450/3-88-018 (Docket ID No. OAR...-Duty Truck Topcoat Operations,” EPA-450/3-88-018 (Docket ID No. OAR-2002-0093 and Docket ID No. A-2001...

Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory

Science.gov (United States)

Khanna, Rajesh; Kumar, Anish; Garg, Mohinder Pal; Singh, Ajit; Sharma, Neeraj

2015-12-01

Electric discharge drill machine (EDDM) is a spark erosion process to produce micro-holes in conductive materials. This process is widely used in aerospace, medical, dental and automobile industries. As for the performance evaluation of the electric discharge drilling machine, it is very necessary to study the process parameters of machine tool. In this research paper, a brass rod 2 mm diameter was selected as a tool electrode. The experiments generate output responses such as tool wear rate (TWR). The best parameters such as pulse on-time, pulse off-time and water pressure were studied for best machining characteristics. This investigation presents the use of Taguchi approach for better TWR in drilling of Al-7075. A plan of experiments, based on L27 Taguchi design method, was selected for drilling of material. Analysis of variance (ANOVA) shows the percentage contribution of the control factor in the machining of Al-7075 in EDDM. The optimal combination levels and the significant drilling parameters on TWR were obtained. The optimization results showed that the combination of maximum pulse on-time and minimum pulse off-time gives maximum MRR.

Achievement report for fiscal 2000 on the phase II research and development for the hydrogen utilizing international clean energy system technology (WE-NET). Task 1. Investigations and researched on system assessment; 2000 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET) dai 2 ki kenkyu kaihatsu. Task 1. System hyoka ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This paper describes the achievements in fiscal 2000 from the WE-NET Phase II for Task-1. Technologies drawing attentions relate to fuel cell driven automobiles and hybrid automobiles in the field of utilizing hydrogen derived from reproducible energies and fossil energies, and fuel cell co-generation and micro gas turbine co-generation in the field of electric power generation. Hydrogen reformed from gasoline on board the automobile as the fuel for fuel cell driven automobiles, hydrogen as a by-product of coke furnace off-gas (COG), and reproducible energy hydrogen have the same fuel consumption performance as in the hybrid automobiles. Particularly the COG is low in cost, and has large supply potential. Liquefied hydrogen is as promising as compressed hydrogen in view of the cost for automotive hydrogen supply stations. What has high economic performance as the self-sustaining systems for islands are photovoltaic and wind power generation, and the system using hydrogen as the secondary energy. Since much of the reproducible energies is used for electric power demand in Japan, the by-product hydrogen and the reformed hydrogen in an amount of 9.3 billion Nm{sup 3}/year would take care of majority of the demand in view of the short time period. For a longer time span, hydrogen originated from the reproduced energies in the Pan-Pacific Region should be introduced. (NEDO)

STRATEGIC HUMAN RESOURCE MANAGEMENT PRACTICES AND ITS IMPACT ON WORK LIFE BALANCE OF EMPLOYEES OF AUTOMOBILE INDUSTRY IN PUNE REGION

OpenAIRE

Dr. K. Ramamurthi; Mr. Lambodar Saha

2017-01-01

Various strategic practices have already been established to promote the value of Human Resource Management in organizations. The Human Resource Management function is now considered as a strategic tool in the formulation and implementation of organizational strategies to attain its objectives. Automobile Industries are chosen as subjects for this study with specific aspects relating to various strategic human resource management practices and its impact on work-life balance and to determine ...

The Effect of Three Ergonomics Training Programs on the Prevalence of Low-Back Pain among Workers of an Iranian Automobile Factory: A Randomized Clinical Trial

Directory of Open Access Journals (Sweden)

M Aghilinejad

2014-04-01

Full Text Available Background: Many workers suffer from low-back pain. Type and severity of spinal complaints have relationship with work load. Lack of adherence to ergonomics recommendations among the important causes of low-back pain. Objective: To assess the effect of 3 ergonomics training programs on the prevalence of lowback pain among workers of an Iranian automobile factory. Methods: In a parallel-design 4-arm randomized clinical trial, 760 active workers of an automobile factory were studied. 503 workers were found eligible and randomized into 3 intervention groups (n=252, and a control group (n=251. The intervention groups consisted of 3 arms: 84 workers were educated by pamphlet, 84 by lectures, and 84 by workshop. Nordic questionnaire was used to determine the prevalence of spinal complaint before and 1-year after the interventions. The trial is registered with the Iranian Randomized Clinical Trial Registry, number IRCT2013061213182N2. Results: Out of 503 workers, 52 lost to follow-up leaving 451 workers for analyses. The prevalence of low-back pain at the baseline was not significantly different among the studied arms. 1-year after the interventions, the prevalence did not change significantly from the baseline values for the lecture and pamphlet group. However, the prevalence of LBP experienced during the last year significantly (p=0.036 decreased from 42% to 23% in participant took part in the workshop. Conclusion: Training of automobile factory workers in ergonomics is more effective by running workshop than giving lecture or disseminating pamphlet.

Automobile, construction and entertainment business sector influences on sedentary lifestyles.

Science.gov (United States)

Parra, Diana C; de Sá, Thiago H; Monteiro, Carlos A; Freudenberg, Nicholas

2018-04-01

Sedentary lifestyles contribute to premature death and health inequalities. Researchers have studied personal and community-level determinants of inactivity but few have analyzed corporate influences. To reframe the public health debate on inactivity and open new doors for public sector intervention, we conducted a scoping review of evidence from several disciplines to describe how the business and political practices of the automobile, construction, and entertainment sectors have encouraged sedentary lifestyles. In the last 50 years, these industries have found it profitable to produce motor vehicles, housing, and entertainment, which intentionally or unintentionally discourage physical activity. Ceding primary authority for policy decisions in these sectors to the market-based economy has enabled the growth of powerful lobbies that encourage and maintain sedentary lifestyles. To counteract these influences, public health and civil society need to confront more upstream economic and social determinants of sedentary lifestyles. Building on evidence from efforts to change harmful tobacco, alcohol and food industry practices, we propose the creation of research and policy agendas that contribute to public health practice that can modify corporate practices that contribute to physical, social and political environments that discourage physical activity.

Integrated studies for automobile wastes management in developing countries; in the concept of environmentally friendly mechanic village.

Science.gov (United States)

Nwachukwu, Michael Amamechi; Feng, Huan; Achilike, Kennedy

2011-07-01

More cities in developing countries now consider mechanic village (MV) as superior to the city wide auto-workshop practice following the increasing influx of used or waste automobile from industrialized nations. This is because of the numerous advantages of the mechanic village concept as a capacity building, and in poverty alleviation. Nevertheless, mechanic villages are poorly developed with no waste management plan. They are now identified with severe to excessive heavy metal soil pollution, causing ecological and public health hazards. This paper has a wider explanation of what it takes for a mechanic village to be environmentally friendly based on spectroscopic analysis and physical measurements conducted in three MVs. Heavy metal concentrations (mg kg( -1)) above background levels in the upper 100 cm soil profiles of the Okigwe, the Orji, and the Nekede MVs in the Imo River basin collectively range 748-70,606 for Fe; 99-1,090 for Pb; 186-600 for Mn; 102-1,001 for Cu; 8-23 for Cd; 4-27 for Cr; and 3-10 for Ni. The most abundant metals of environmental concerns are Pb, Mn, and Cu, in the order of Pb > Mn > Cu. Three-phase storm water treatment, emission testing, minimum safe farming distance (350 m), extended producer responsibility for disposal or recycling of used motor oil, phyto-remediation using local plants, groundwater monitoring wells, and continuous education of mechanics are recommended. Exporters of waste automobiles to developing countries and the United Nations may assist developing countries in establishing environmentally friendly MVs.

Pollution control and metal resource recovery for low grade automobile shredder residue: a mechanism, bioavailability and risk assessment.

Science.gov (United States)

Singh, Jiwan; Lee, Byeong-Kyu

2015-04-01

Automobile shredder residue (ASR) is considered as hazardous waste in Japan and European countries due to presence of heavy metals. This study was carried on the extraction characteristics of heavy metals (Mn, Fe, Ni, and Cr) from automobile shredder residue (ASR). The effects of pH, temperature, particle size, and liquid/solid ratio (L/S) on the extraction of heavy metals were investigated. The recovery rate of Mn, Fe, Ni, and Cr increased with increasing extraction temperature and L/S ratio. The lowest pH 2, the highest L/S ratio, and the smallest particle size showed the highest recovery of heavy metals from ASR. The highest recovery rates were in the following order: Mn > Ni > Cr > Fe. Reduction of mobility factor for the heavy metals was observed in all the size fractions after the recovery. The results of the kinetic analysis for various experimental conditions supported that the reaction rate of the recovery process followed a second order reaction model (R(2) ⩾ 0.95). The high availability of water-soluble fractions of Mn, Fe, Ni, and Cr from the low grade ASR could be potential hazards to the environment. Bioavailability and toxicity risk of heavy metals reduced significantly with pH 2 of distilled water. However, water is a cost-effective extracting agent for the recovery of heavy metals and it could be useful for reducing the toxicity of ASR. Copyright © 2015 Elsevier Ltd. All rights reserved.

Measurement of particle emission in automobil exhaust - application of continuous radiometric aerosol measurement to the emission of diesel engines

International Nuclear Information System (INIS)

Krasenbrink, A.; Georgi, B.

1989-01-01

The well-known method of measuring continuously dust by β-absorption is transferred to the problem of particle emission in automobile exhaust. With two similar dust-monitors FH62 having different sampling air flow rates and two low-pressure impactors the reliability of radiometric mass determination was verified. First static experiments with diesel soot showed the necessity of a dilution system, a new mass calibration with regard to the changed β-absorptivity and a quicker calculation of concentration for realtime measurements. (orig.) [de

Simulation of a distance estimator for battery electric vehicle

Directory of Open Access Journals (Sweden)

Chew Kuew Wai

2015-09-01

Full Text Available Battery Electric Vehicle (BEV is a promising candidate in reducing air pollution and fossil fuel dependencies. It is a growing market for the automobile manufacturers. Although there are many advantages of driving a BEV, it is still not widely accepted in the market due to the limited driving range. Other than just improving the technologies that drive the vehicle, an additional range estimation system can calm the ‘range anxiety’ caused by the limited range of BEVs. Merely predicting the range based on the state of charge of the battery, the average driving speed, and the average power consumption is inadequate. This paper proposes a new range estimator, the dynamic range estimator, which also takes into account the driving behavior, in addition to the slopes of the trip for its energy estimation. The driving behavior is obtained based on the response to speed error and the time delay between throttle pedal and brake pedal switching. In this way, the driving behavior is a fixed response for any driving speeds on the same route thus, allowing the energy consumption to be compared for different speeds.

CHEMICAL INTERACTIONS TO CLEANUP HIGHLY POLLUTED AUTOMOBILE SERVICE STATION WASTEWATER BY BIOADSORPTION-COAGULATION-FLOCCULATION

Directory of Open Access Journals (Sweden)

Carlos Banchon

2017-01-01

Full Text Available The present study addresses an ecofriendly solution to treat automobile service stations effluents with high concentrations of oily substances, surfactants, organic matter and heavy metals. Bioadsorption using sawdust from pine trees, sugar cane bagasse and coconut coir without any chemical modification removed colloidal contamination up to 70%. Polyaluminium chloride, ferric chloride and polyacrylamide were applied to remove dissolved and colloidal pollutants under saline conditions without change of initial pH. Both bioadsorption and coagulation-flocculation removed up to 97.8% of BOD, COD, surfactants and heavy metals at a saline concentration of 1.5% NaCl. The increase of ionic strength promoted a high sludge index and a representative cost saving in chemicals consumption of almost 70%. High levels of pollution removal with the minimal use of chemicals is herein presented.

Design and analysis of automobile components using industrial procedures

Science.gov (United States)

Kedar, B.; Ashok, B.; Rastogi, Nisha; Shetty, Siddhanth

2017-11-01

Today’s automobiles depend upon mechanical systems that are crucial for aiding in the movement and safety features of the vehicle. Various safety systems such as Antilock Braking System (ABS) and passenger restraint systems have been developed to ensure that in the event of a collision be it head on or any other type, the safety of the passenger is ensured. On the other side, manufacturers also want their customers to have a good experience while driving and thus aim to improve the handling and the drivability of the vehicle. Electronics systems such as Cruise Control and active suspension systems are designed to ensure passenger comfort. Finally, to ensure optimum and safe driving the various components of a vehicle must be manufactured using the latest state of the art processes and must be tested and inspected with utmost care so that any defective component can be prevented from being sent out right at the beginning of the supply chain. Therefore, processes which can improve the lifetime of their respective components are in high demand and much research and development is done on these processes. With a solid base research conducted, these processes can be used in a much more versatile manner for different components, made up of different materials and under different input conditions. This will help increase the profitability of the process and also upgrade its value to the industry.

Optimal Planning Method of On-load Capacity Regulating Distribution Transformers in Urban Distribution Networks after Electric Energy Replacement Considering Uncertainties

Directory of Open Access Journals (Sweden)

Yu Su

2018-06-01

Full Text Available Electric energy replacement is the umbrella term for the use of electric energy to replace oil (e.g., electric automobiles, coal (e.g., electric heating, and gas (e.g., electric cooking appliances, which increases the electrical load peak, causing greater valley/peak differences. On-load capacity regulating distribution transformers have been used to deal with loads with great valley/peak differences, so reasonably replacing conventional distribution transformers with on-load capacity regulating distribution transformers can effectively cope with load changes after electric energy replacement and reduce the no-load losses of distribution transformers. Before planning for on-load capacity regulating distribution transformers, the nodal effective load considering uncertainties within the life cycle after electric energy replacement was obtained by a Monte Carlo method. Then, according to the loss relation between on-load capacity regulating distribution transformers and conventional distribution transformers, three characteristic indexes of annual continuous apparent power curve and replacement criteria for on-load capacity regulating distribution transformers were put forward in this paper, and a set of distribution transformer replaceable points was obtained. Next, based on cost benefit analysis, a planning model of on-load capacity regulating distribution transformers which consists of investment profitability index within the life cycle, investment cost recouping index and capacity regulating cost index was put forward. The branch and bound method was used to solve the planning model within replaceable point set to obtain upgrading and reconstruction scheme of distribution transformers under a certain investment. Finally, planning analysis of on-load capacity regulating distribution transformers was carried out for electric energy replacement points in one urban distribution network under three scenes: certain load, uncertain load and nodal

Magnesium and Manganese Silicides For Efficient And Low Cost Thermo-Electric Power Generation

Energy Technology Data Exchange (ETDEWEB)

Trivedi, Sudhir B. [Brimrose Technology Corporation; Kutcher, Susan W. [Brimrose Technology Corporation; Rosemeier, Cory A. [Brimrose Technology Corporation; Mayers, David [Brimrose Technology Corporation; Singh, Jogender [Pennsylvania State University

2013-12-02

Thermoelectric Power Generation (TEPG) is the most efficient and commercially deployable power generation technology for harvesting wasted heat from such things as automobile exhausts, industrial furnaces, and incinerators, and converting it into usable electrical power. We investigated the materials magnesium silicide (Mg2Si) and manganese silicide (MnSi) for TEG. MgSi2 and MnSi are environmentally friendly, have constituent elements that are abundant in the earth's crust, non-toxic, lighter and cheaper. In Phase I, we successfully produced Mg2Si and MnSi material with good TE properties. We developed a novel technique to synthesize Mg2Si with good crystalline quality, which is normally very difficult due to high Mg vapor pressure and its corrosive nature. We produced n-type Mg2Si and p-type MnSi nanocomposite pellets using FAST. Measurements of resistivity and voltage under a temperature gradient indicated a Seebeck coefficient of roughly 120 V/K on average per leg, which is quite respectable. Results indicated however, that issues related to bonding resulted in high resistivity contacts. Determining a bonding process and bonding material that can provide ohmic contact from room temperature to the operating temperature is an essential part of successful device fabrication. Work continues in the development of a process for reproducibly obtaining low resistance electrical contacts.

An Anthropologist Examines the Navy’s Recruiting Process.

Science.gov (United States)

1981-12-01

who come to these border towns primarily to pur- chase appliances, electrical and electronic goods, automobile parts, some kinds of clothing, and some...Am automobile in order to entice him away from the Navy. There are some relatively stringent security requirements for Cuban appli- cants. The...22217 Naval Military Personnel Command HRm Department (NMPC-6)Naval Research Laboratory Washington, DC 20350 Code 2627Codenon 262 WahigtnDC205 Washington

NANO-BATTERY TECHNOLOGY FOR EV-HEV PANEL: A PIONEERING STUDY

OpenAIRE

Ataur Rahman; M. Rashid; A. K. M. Mohiuddin; M. N. A. Hawlader

2015-01-01

Global trends toward CO2 reduction and resource efficiency have significantly increased the importance of lightweight materials for automobile original equipment manufacturers (OEM). CO2 reduction is a fundamental driver for a more lightweight automobile. The introduction of Electrical Vehicles (EVs) is one initiative towards this end. However EVs are currently facing several weaknesses: limited driving range, battery pack heaviness, lack of safety and thermal control, high cost, and overall ...

The impact of fixed and variable cost on automobile demand: Evidence from Denmark

DEFF Research Database (Denmark)

Mulalic, Ismir; Rouwendal, Jan

2015-01-01

and derive an expression for the full willingness to pay for characteristics that takes into account the impact on fixed as well as variable costs. We apply the model to the demand for automobiles using rich Danish register data. Estimation reveals considerable heterogeneity and a non-negligible contribution......Many car characteristics, for instance cabin space and engine power, have a positive impact on fixed and variable costs. We extend the hedonic model, that considers only one type of cost, to the situation in which fixed as well as variable costs depend on the characteristics of the durable...... of the variable costs in total willingness to pay. Next we show that under suitable assumptions a structural interpretation of our estimates is possible. We show that the willingness to pay per kilometer driven can be interpreted as a parameter of the utility function and study how it is related to household...

Automobile Accidents Attended by Mobile Emergency Care Service

Directory of Open Access Journals (Sweden)

Ana Virgínia Gomes Barros

2017-05-01

Full Text Available Background: Automobile accidents are increasing every day and are becoming a serious public health problem due to the high morbidity and mortality rate. The goal of the current study was to characterise the traffic accidents attended by the Mobile Emergency Care Service (MECS in Ibiara, PB. Methods: This exploratory, descriptive, documentary study adopted a quantitative approach and analysis of data. The population consisted of all victims of traffic accidents attended by MECS in the city of Ibiara, PB, from June 2015 to June 2016. The following variables were studied: age, gender, time and day of the week the accident occurred, nature of the incident, substance ingested by the victim, wearing personal protective equipment (PPE or not, the anatomical lesions on the victim and the body regions hit during the accident. Results: The sample consisted of 49 accident victims, and the majority (81.6% were male, predominately 30 to 59 years. Events occurring at night (63.3% and during the week (65.3% predominated. The most frequent type of accident was motorcycle fall (71.4%, with almost half having consumed alcohol (46.9% and most not wearing PPE (77.6%. The regions of the body most affected were the lower limbs (67.3% and upper limbs (53.1%. Conclusion: The main factor/cause of these accidents was due to imprudence and violation of traffic laws, highlighting the need to invest in traffic education policies, to direct campaigns for the prevention of traffic accidents, as well as expand the surveillance of traffic laws by authorities.