Determination of minerals content in leaves of Moringa Oleifera by neutron activation analysis

International Nuclear Information System (INIS)

Th Rina Mulyaningsih; Saeful Yusuf

2018-01-01

Moringa oleifera ( Mo) or kelor is a high-value plant, distributed in many tropical and subtropical countries. This plant can be used as a vegetable, cosmetic oil, and medicinal plant. The leaves of Mo is rich in essential minerals needed by the body’s health. Moringa oleifera widely cultivated in various places in Indonesia, easily obtained and inexpensive so precious can be used to overcome malnutrition. Research on the macro-micro mineral content in Moringa leaves here is still limited. Mineral composition in leaves include Mo leaves varies depending on location grow. The purpose of this research is to determine the mineral content in the leaves of the Mo taken from Indonesia. For the preliminary study samples was taken from Central Java to be compared with the results of studies conducted in several other countries. Leaf samples were collected randomly from sampling area. Mineral content in the samples is determined using Neutron Activation Analysis (NAA). Irradiation was carried out at rabbit system of Multipurpose Reactor G.A Siwabessy on neutron flux ~10 13 n.cm -2 .dt -1 . The results obtained indicate that Mo is rich in essential minerals, mainly Ca, Mg, K, Zn, Fe and Cl. Content in dried leaves include: calcium (3.45 % ), magnesium (0.66 %), potassium (3.35 %), chloride (0.25 %), iron (147.20 mg/kg), sodium ( 152.52 mg/kg ), zinc (35.71 mg/kg), and manganese (102.10 mg/kg). Mo also contains other minerals such as chromium (4.76 mg/kg), bromine (4.82 mg/kg), cobalt (0.16 mg/kg), and aluminium (150.40 mg/kg) in addition to other element. Compared with the results of existing studies, it shows that mineral composition in Mo leaves varies depending on the location where the plant is grown. (author)

Bone mineral content and bone metabolism in young adults with severe periodontitis

DEFF Research Database (Denmark)

Wowern von, N.; Westergaard, J.; Kollerup, G.

2001-01-01

Bone loss, bone markers, bone metabolism, bone mineral content, osteoporosis, severe periodontitis......Bone loss, bone markers, bone metabolism, bone mineral content, osteoporosis, severe periodontitis...

Measurement of bone mineral content by dual photon absorptiometry in patients with metabolic bone diseases

International Nuclear Information System (INIS)

Ohtani, Masami; Hino, Megumu; Ikekubo, Katsuji

1991-01-01

Dual photon absorptiometry was used to measure bone mineral content in 225 patients with metabolic bone diseases (84 males and 102 females) and 186 healthy subjects (25 males and 200 females). Mineral content of the lumbar vertebrae tended to rapidly decrease after the age of 40 in healthy female subjects. For males, gradual decrease in mineral content was associated with aging. Bone mineral content showed a correlation with the severity of osteoporosis as shown on X-ray films. Mineral content tended to be decreased in the lumbar vertebrae in patients with vertebral compression fracture, and in the femur in patients with vertebral or femoral fracture. For hyperthyroidism, mineral content of the lumbar vertebrae was decreased in some females, but was within normal limit in males. Hyperparathyroidism and hypoparathyroidism tended to be associated with decrease and increase in mineral content, respectively. Two each patients with osteomalacia or Cushing syndrome had a decreased mineral content. In these patients, it was increased after the treatment. (N.K.)

Measurement of bone mineral content by dual photon absorptiometry in patients with metabolic bone diseases

Energy Technology Data Exchange (ETDEWEB)

Ohtani, Masami; Hino, Megumu; Ikekubo, Katsuji (Kobe City General Hospital (Japan)) (and others)

1991-12-01

Dual photon absorptiometry was used to measure bone mineral content in 225 patients with metabolic bone diseases (84 males and 102 females) and 186 healthy subjects (25 males and 200 females). Mineral content of the lumbar vertebrae tended to rapidly decrease after the age of 40 in healthy female subjects. For males, gradual decrease in mineral content was associated with aging. Bone mineral content showed a correlation with the severity of osteoporosis as shown on X-ray films. Mineral content tended to be decreased in the lumbar vertebrae in patients with vertebral compression fracture, and in the femur in patients with vertebral or femoral fracture. For hyperthyroidism, mineral content of the lumbar vertebrae was decreased in some females, but was within normal limit in males. Hyperparathyroidism and hypoparathyroidism tended to be associated with decrease and increase in mineral content, respectively. Two each patients with osteomalacia or Cushing syndrome had a decreased mineral content. In these patients, it was increased after the treatment. (N.K.).

Tensile properties of orthodontic elastomeric ligatures.

Science.gov (United States)

Ahrari, F; Jalaly, T; Zebarjad, M

2010-01-01

Tensile properties of elastomeric ligatures become important when efficiency of orthodontic appliances is considered. The aim of this study was to compare tensile strength, extension to tensile strength, toughness and modulus of elasticity of elastomeric ligatures in both the as--received condition and after 28 days of immersion in the simulated oral environment. Furthermore, the changes that occurred in tensile properties of each brand of ligatures after 28 days were evaluated. Experimental-laboratory based. Elastomeric ligatures were obtained from different companies and their tensile properties were measured using Zwick testing machine in both the as-received condition and after 28 days of immersion in the simulated oral environment. The data were analyzed using independent sample t-tests, analysis of variance and Tukey tests. After 28 days, all the ligatures experienced a significant decrease in tensile strength, extension to tensile strength and toughness ( P tensile properties of different brands of ligatures in both conditions ( P tensile properties of different brands of ligatures, which should be considered during selection of these products.

Mineral content of traditional leafy vegetables from western Kenya

DEFF Research Database (Denmark)

Orech, F.O.; Christensen, Dirk Lund; Larsen, T.

2007-01-01

and diseases. This paper describes the mineral (calcium, iron and zinc) contents in some 54 traditional vegetable species collected from Nyang'oma area of Bondo district, western Kenya. Atomic absorption spectroscopy was used to determine the mineral content. We found that most traditional leafy vegetables......, domesticated and wild, generally contain higher levels of calcium, iron and zinc compared with the introduced varieties such as spinach (Spanacia oleracea), kale (Brassica oleracea var. acephala) and cabbage (Brassica oleracea var. capitata). The results of this study could contribute towards identification...

40 CFR 427.40 - Applicability; description of the asbestos paper (elastomeric binder) subcategory.

Science.gov (United States)

2010-07-01

... asbestos paper (elastomeric binder) subcategory. 427.40 Section 427.40 Protection of Environment... SOURCE CATEGORY Asbestos Paper (Elastomeric Binder) Subcategory § 427.40 Applicability; description of the asbestos paper (elastomeric binder) subcategory. The provisions of this subpart are applicable to...

Biomimetic elastomeric, conductive and biodegradable polycitrate-based nanocomposites for guiding myogenic differentiation and skeletal muscle regeneration.

Science.gov (United States)

Du, Yuzhang; Ge, Juan; Li, Yannan; Ma, Peter X; Lei, Bo

2018-03-01

Artificial muscle-like biomaterials have gained tremendous interests owing to their broad applications in regenerative medicine, wearable devices, bioelectronics and artificial intelligence. Unfortunately, key challenges are still existed for current materials, including biomimetic viscoelasticity, biocompatibility and biodegradation, multifunctionality. Herein, for the first time, we develop highly elastomeric, conductive and biodegradable poly (citric acid-octanediol-polyethylene glycol)(PCE)-graphene (PCEG) nanocomposites, and demonstrate their applications in myogenic differentiation and guiding skeletal muscle tissue regeneration. In PCEG nanocomposites, PCE provides the biomimetic elastomeric behavior, and the addition of reduced graphene oxide (RGO) endows the enhanced mechanical strength and conductivity. The highly elastomeric behavior, significantly enhanced modulus (400%-800%), strength (200%-300%) of PCEG nanocomposites with controlled biodegradability and electrochemical conductivity were achieved. The myoblasts proliferation and myogenic differentiation were significantly improved by PCEG nanocomposite. Significantly high in vivo biocompatibility of PCEG nanocomposites was observed when implanted in the subcutaneous tissue for 4 weeks in rats. PCEG nanocomposites could significantly enhance the muscle fibers and blood vessels formation in vivo in a skeletal muscle lesion model of rat. This study may provide a novel strategy to develop multifunctional elastomeric nanocomposites with high biocompatibility for potential soft tissue regeneration and stretchable bioelectronic devices. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sterilizing elastomeric chains without losing mechanical properties. Is it possible?

Directory of Open Access Journals (Sweden)

Matheus Melo Pithon

2015-06-01

Full Text Available OBJECTIVE: To investigate the effects of different sterilization/disinfection methods on the mechanical properties of orthodontic elastomeric chains. METHODS: Segments of elastomeric chains with 5 links each were sent for sterilization by cobalt 60 (Co60 (20 KGy gamma ray technology. After the procedure, the elastomeric chains were contaminated with clinical samples of Streptococcus mutans. Subsequently, the elastomeric chains were submitted to sterilization/disinfection tests carried out by means of different methods, forming six study groups, as follows: Group 1 (control - without contamination, Group 2 (70°GL alcohol, Group 3 (autoclave, Group 4 (ultraviolet, Group 5 (peracetic acid and Group 6 (glutaraldehyde. After sterilization/disinfection, the effectiveness of these methods, by Colony forming units per mL (CFU/mL, and the mechanical properties of the material were assessed. Student's t-test was used to assess the number of CFUs while ANOVA and Tukey's test were used to assess elastic strength. RESULTS: Ultraviolet treatment was not completely effective for sterilization. No loss of mechanical properties occurred with the use of the different sterilization methods (p > 0.05. CONCLUSION: Biological control of elastomeric chains does not affect their mechanical properties.

Mineral, protein and nitrate contents in leaves of Pereskia aculeata subjected to nitrogen fertilization

Directory of Open Access Journals (Sweden)

Maria Regina de Miranda Souza

2016-03-01

Full Text Available Considering that nitrogen is directly related to leaf protein content, the nitrogen fertilization in Pereskia aculeata plants may affect the protein content and increase its nutritional potential. This study aimed at assessing the effect of nitrogen fertilization on mineral, protein and nitrate contents, as well as the yield of P. aculeata leaves. A randomized blocks design was used, with three replications and five treatments, consisting of increasing topdressing nitrogen doses (0-400 kg ha-1, in soil with organic matter content of 4.0 dag kg-1. Three harvests were performed for leaf analysis. No significant effect was observed for mineral and protein content or leaf fresh mass yield. The mean values for mineral composition were: 3.52 dag kg-1 of N, 0.47 dag kg-1 of P, 4.65 dag kg-1 of Ca, 0.71 dag kg-1 of Mg, 0.25 dag kg-1 of S, 36.64 mg kg-1 of Zn and 174.13 mg kg-1 of Fe. The mean content for protein was 21.86 % and the leaf fresh mass yield was 0.971 kg plant-1. K levels decreased from 50 kg ha-1 of N. Nitrate increased linearly with the nitrogen fertilization, reaching a maximum value of 78.2 mg kg-1 of fresh mass, well below the health risk threshold. It was concluded that a soil with high organic matter content does not require nitrogen fertilization. However, doses up to 400 kg ha-1 of nitrogen ensure adequate leaf yield and protein and mineral contents within the desired range for the species, being a food rich in proteins, iron and calcium.

Evaluation of shear mounted elastomeric damper

Science.gov (United States)

Zorzi, E.; Walton, J.

1982-01-01

Viton-70 elastomeric shear mounted damper was built and tested on a T-55 power turbine spool in the rotor's high speed balancing rig. This application of a shear mounted elastomeric damper demonstrated for the first time, the feasibility of using elastomers as the primary rotor damping source in production turbine engine hardware. The shear damper design was selected because it was compatible with actual gas turbine engine radial space constraints, could accommodate both the radial and axial thrust loads present in gas turbine engines, and was capable of controlled axial preload. The shear damper was interchangeable with the production T-55 power turbine roller bearing support so that a direct comparison between the shear damper and the production support structure could be made. Test results show that the Viton-70 elastomer damper operated successfully and provided excellent control of both synchronous and nonsynchronous vibrations through all phases of testing up to the maximum rotor speed of 16,000 rpm. Excellent correlation between the predicted and experienced critical speeds, mode shapes and log decrements for the power turbine rotor and elastomer damper assembly was also achieved.

Analysis of the Influence of Food Colorings in Esthetic Orthodontic Elastomeric Ligatures.

Science.gov (United States)

Dias da Silva, Vanessa; de Lima, Eduardo Martinelli S; Dias, Caroline; Osório, Leandro Berni

2016-01-01

The purpose of this study was to evaluate in vitro the color changes of esthetic orthodontic elastomeric ligatures of different shades when exposed to four food colorings commonly found in the diet of patients. The sample consisted of esthetic orthodontic elastomeric ligatures in the colors pearl, pearl blue, pearl white and colorless, which were immersed for 72 hours in five different solutions: distilled water (control group), coffee, tea, Coca-Cola ® and wine. The color changes of the esthetic orthodontic elastomeric ligatures were measured with the aid of a spectrophotometer, at T1 - as provided by the manufacturer; and T2 - after colorings process. The results indicated that the esthetic orthodontic elastomeric ligatures of all initial hues are susceptible to pigmentation. Among the evaluated colors, all changed the finished look and the color of the samples tested. In ascending order, the color of the samples was as follows: distilled water, Coca-Cola ® , black tea, wine and coffee. The substances that have a greater potential for pigmentation in esthetic orthodontic elastomeric ligatures were black tea, wine and coffee, respectively. All shades of esthetic orthodontic elastomeric ligatures are susceptible to color change.

Rheological properties and mineral content of buckwheat enriched wholegrain wheat pasta

Directory of Open Access Journals (Sweden)

Nedeljković Nataša

2014-01-01

Full Text Available Light buckwheat flour (LBF was used to substitute 20% of whole wheat flour (WWF in the formulation of wholegrain wheat pasta. Wholegrain wheat pasta (WWP and buckwheat enriched wholegrain wheat pasta (BWWP were produced on an industrial scale. Substitution level of buckwheat flour (20% was based on previously conducted rheological tests on LBF/WWF blends which were performed using 10, 20 and 30% of LBF. The obtained Mixolab profiles have indicated that wheat blend containing 20% LBF expressed the most similar rheological parameters to WWF. Proximate composition, cooking quality and mineral content of BWWP were analyzed and compared with those of WWP. The substitution of WWF with LBF in the pasta formulation resulted in significantly increased (P < 0.05 contents of P, Mg, K and Zn compared to WWP in dry pasta. The reduction in mineral content of BWWP during cooking was significantly higher (P < 0.05 compared to WWP. The content of P, Mg and K were at same level in both type of pasta after cooking. The obtained results suggest that enrichment of WWP with LBF at the level of 20% did not improve the mineral content of cooked pasta, although increase in minerals was observed in dry pasta. [Projekat Ministarstva nauke Republike Srbije, br. TR31029

Relationships between birefringence and mineral content in artificial caries lesions of enamel.

NARCIS (Netherlands)

Theuns, H.M.; Shellis, R.P.; Groeneveld, A.; Dijk, J.W. van; Poole, D.F.

1993-01-01

The microradiographic mineral content and birefringence in water and Thoulet's solution were measured at selected points in sections of caries-like lesions. Birefringence was not related to mineral content in sound superficial enamel immersed in Thoulet's solution or in the lesion body immersed in

Accuracy and precision in the in vivo determination of bone minerals content using the attenuation of a continuous x-ray spectrum

International Nuclear Information System (INIS)

Jonson, R.; Roos, B.; Hansson, T.; Mattsson, S.

1986-01-01

An x-ray technique using a highly stabilized generator and a germanium detector for the in vivo determination of bone mineral content in the lumbar vertebra has been described previously from the authors laboratory. This technique estimates the bone mineral content in presence of fat and lean soft tissue in the path of the x-ray beam. The present investigation was undertaken in vitro to determine the accuracy, precision and long term reproducibility of the technique. The ash density of 12 human bone specimens was determined on the basis of ash weight and total volume measurements of each specimen. The result was compared with the measured bone mineral content. The deviation between the result of the attenuation measurements and the weight/volume measurements was (4 +/- 0.9%). The precision of the method as measured in vitro has been determined to be between +/- 1.6% (high bone mineral content) and +/- 2.6% (low bone mineral content) by repeated measurements on a new type of bone mineral phantom. The results show that the technique described gives an accuracy and a precision which is of the same order of magnitude as the technique using dual photon energy absorptiometry

Effect of Probiotics Supplementation on Bone Mineral Content and Bone Mass Density

Directory of Open Access Journals (Sweden)

Kolsoom Parvaneh

2014-01-01

Full Text Available A few studies in animals and a study in humans showed a positive effect of probiotic on bone metabolism and bone mass density. Most of the investigated bacteria were Lactobacillus and Bifidobacterium . The positive results of the probiotics were supported by the high content of dietary calcium and the high amounts of supplemented probiotics. Some of the principal mechanisms include (1 increasing mineral solubility due to production of short chain fatty acids; (2 producing phytase enzyme by bacteria to overcome the effect of mineral depressed by phytate; (3 reducing intestinal inflammation followed by increasing bone mass density; (4 hydrolysing glycoside bond food in the intestines by Lactobacillus and Bifidobacteria. These mechanisms lead to increase bioavailability of the minerals. In conclusion, probiotics showed potential effects on bone metabolism through different mechanisms with outstanding results in the animal model. The results also showed that postmenopausal women who suffered from low bone mass density are potential targets to consume probiotics for increasing mineral bioavailability including calcium and consequently increasing bone mass density.

Enhancing retention of partial dentures using elastomeric retention rings

Directory of Open Access Journals (Sweden)

Kakkirala Revathi

2015-01-01

Full Text Available This report presents an alternative method for the retention of partial dentures that relies on the engagement of tooth undercuts by a lining material. The lab procedures are also presented. A new maxillary and mandibular acrylic partial dentures were fabricated using elastomeric retention technique for a partially dentate patient. A partially dentate man reported difficulty in retaining his upper removable partial denture (RPD. The maxillary RPD was designed utilizing elastomeric retention technique. During follow-up, it was necessary to replace the retention rings due to wear. The replacement of the retention rings, in this case, was done through a chairside reline technique. Elastomeric retention technique provides exceptionally good retention can be indicated to stabilize, cushion, splint periodontally involved teeth, no enough undercut for clasps, eliminate extractions, single or isolated teeth.

Improved process control through real-time measurement of mineral content

Energy Technology Data Exchange (ETDEWEB)

Turler, Daniel; Karaca, Murat; Davis, William B.; Giauque, Robert D.; Hopkins, Deborah

2001-11-02

In a highly collaborative research and development project with mining and university partners, sensors and data-analysis tools are being developed for rock-mass characterization and real-time measurement of mineral content. Determining mineralogy prior to mucking in an open-pit mine is important for routing the material to the appropriate processing stream. A possible alternative to lab assay of dust and cuttings obtained from drill holes is continuous on-line sampling and real-time x-ray fluorescence (XRF) spectroscopy. Results presented demonstrate that statistical analyses combined with XRF data can be employed to identify minerals and, possibly, different rock types. The objective is to create a detailed three-dimensional mineralogical map in real time that would improve downstream process efficiency.

Quantitative image of bone mineral content

International Nuclear Information System (INIS)

Katoh, Tsuguhisa

1990-01-01

A dual energy subtraction system was constructed on an experimental basis for the quantitative image of bone mineral content. The system consists of a radiographing system and an image processor. Two radiograms were taken with dual x-ray energy in a single exposure using an x-ray beam dichromized by a tin filter. In this system, a film cassette was used where a low speed film-screen system, a copper filter and a high speed film-screen system were layered on top of each other. The images were read by a microdensitometer and processed by a personal computer. The image processing included the corrections of the film characteristics and heterogeneity in the x-ray field, and the dual energy subtraction in which the effect of the high energy component of the dichromized beam on the tube side image was corrected. In order to determine the accuracy of the system, experiments using wedge phantoms made of mixtures of epoxy resin and bone mineral-equivalent materials in various fractions were performed for various tube potentials and film processing conditions. The results indicated that the relative precision of the system was within ±4% and that the propagation of the film noise was within ±11 mg/cm 2 for the 0.2 mm pixels. The results also indicated that the system response was independent of the tube potential and the film processing condition. The bone mineral weight in each phalanx of the freshly dissected hand of a rhesus monkey was measured by this system and compared with the ash weight. The results showed an error of ±10%, slightly larger than that of phantom experiments, which is probably due to the effect of fat and the variation of focus-object distance. The air kerma in free air at the object was approximately 0.5 mGy for one exposure. The results indicate that this system is applicable to clinical use and provides useful information for evaluating a time-course of localized bone disease. (author)

Investigation of the mineral contents of some varieties of powder milk by pixe

International Nuclear Information System (INIS)

Ahmad, N.; Aejaz, S.M.H.; Naeem, A.; Shahnawaz, M; Saadat, S.

2010-01-01

Milk and milk products constitute an important ingredient of human nutrition all over the world. Macro mineral contents like sodium, potassium, calcium, phosphorus and micro mineral contents like iron, copper, zinc, manganese of some varieties of powder milk available in the local market have been investigated by Proton Induced X-Ray Emission (PIXE). These elements are essential for the optimal functioning of various chemical processes taking place in the human body. Any toxic element present in milk can also be detected simultaneously. PIXE is a powerful and universal elemental analysis technique with high detection sensitivity for elements with Z> 11 in the periodic table. The technique is non-destructive and may be applied to samples as small as a cell to a large painting. (author)

Determination of Mineral Contents in Unpolished Rice and Bean Samples by Neutron Activation Analysis

International Nuclear Information System (INIS)

Moon, J. H.; Kim, S. H.; Baek, S. Y.; Chung, Y. S.

2012-01-01

As scientists have focused their researches on the health impacts caused by mineral nutrient deficiencies and hazardous elements, public concern regarding mineral intake from dietary food is rising. In this reason, the dietary habits of Koreans have been shifted from white rice to more nutrient rice like unpolished rice and rice mixed with beans. It is known that unpolished rice and beans contain more protein, vitamin and mineral contents than white rice and are more beneficial to human health, even though they sometimes cause indigestion or allergy. The objectives of this study were to determine the mineral contents in unpolished rice and bean samples by a neutron activation analysis (NAA) and to compare the level of mineral contents between the samples

Determination of Mineral Contents in Unpolished Rice and Bean Samples by Neutron Activation Analysis

Energy Technology Data Exchange (ETDEWEB)

Moon, J. H.; Kim, S. H.; Baek, S. Y.; Chung, Y. S. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-05-15

As scientists have focused their researches on the health impacts caused by mineral nutrient deficiencies and hazardous elements, public concern regarding mineral intake from dietary food is rising. In this reason, the dietary habits of Koreans have been shifted from white rice to more nutrient rice like unpolished rice and rice mixed with beans. It is known that unpolished rice and beans contain more protein, vitamin and mineral contents than white rice and are more beneficial to human health, even though they sometimes cause indigestion or allergy. The objectives of this study were to determine the mineral contents in unpolished rice and bean samples by a neutron activation analysis (NAA) and to compare the level of mineral contents between the samples

Natural variation and QTL analysis for cationic mineral content in seeds of Arabidopsis thaliana.

NARCIS (Netherlands)

Vreugdenhil, D.; Aarts, M.G.M.; Koornneef, M.; Nelissen, H.J.M.; Ernst, W.H.O.

2004-01-01

Naturally occurring genetic variation for contents of cationic minerals in seeds of Arabidopsis thaliana was studied by screening a series of accessions (ecotypes) for Ca, Fe, K, Mg, Mn, Na, Zn, and for total contents of P. Variation was observed for all minerals and correlations between contents of

Mineral content of insect infested stored legumes treated with edible oils.

Science.gov (United States)

Modgil, R

2000-12-01

Mineral content of three insect (pulse beetle, Callosobruchus chinensis L.) infested legumes viz. chick pea, mung pea and pigeon pea stored for six months and treated with three edible oils viz. groundnut, mustard and coconut oil has been studied. With increase in storage period significant increase in calcium, phosphorus and iron content of untreated legumes was observed. After three months of storage slight increase in three minerals was observed in the legumes treated with coconut oil which continued till the end of sixth months as compared to other two oil treated counterparts. The storage period was associated with insect infestation which in turn influenced the mineral content of legumes. Ground nut and mustard oils were able to protect legumes for six months against insect infestation when applied in small amounts (0.5%). Whereas coconut oil had protective effect against insect infestation for four months only.

INTERACTION BETWEEN DIETARY MINERAL AND PHYTASE ON BIOLOGICAL PERFORMANCES OF JAPANESE FLOUNDER, Paralichthys olivaceus. PART II. MINERAL DIGESTIBILITY AND VERTEBRAL MINERAL CONTENT

Directory of Open Access Journals (Sweden)

Asda Laining

2015-06-01

Full Text Available Interactive effects between dietary inorganic phosphorus (IP and phytase (P on mineral digestibility and vertebral mineral content were investigated in a 30 days feeding trial followed by three weeks digestibility trial with Japanese flounder, Paralichthys olivaceus. Eight experimental diets were formulated based on two levels of dietary Ca at 0% and 0.2% combined with either 0% or 0.25% of dietary IP and either with 0 and 2,000 fytase unit (FTU/kg of phytase in diet, respectively. Result indicated that digestibility of total phosphorus significantly increased by three dietary compounds where the highest was observed in fish fed diet contained 0.25% IP and 2,000 FTU phytase/kg and dietary Ca also included in diet. Significant interaction was only detected between dietary IP and P on this parameter. Supplementation of IP and Ca not phytase significantly improved Ca digestibility. Ca digestibility was very poor when dietary IP and Ca were not supplemented in diet even with when phytase supplemented in diet. There was significant interaction between dietary IP and Ca on Ca digestibility. Vertebral total phosphorus, Ca, and Mg content as well as Ca:P ratio were significantly enhanced by dietary IP and phytase. Dietary Ca has significant effect only on vertebral total phosphorus. Interaction between dietary IP and Ca was significantly found on vertebral Ca content and Ca:P ratio. No significant second-order interaction was observed among the three dietary mineral on overall parameters. Based on total phosphorus and Ca digestibility as well vertebral phosphorus content found in this study, dietary IP, Ca, and phytase at rate of 0.25%, 0.2%, and 2,000 FTU phytase/kg diet, respectively are needed to supplement in diet for a better mineral absorption and bone mineralization.

Mineral Composition, Total Phenol Content and Antioxidant Activity of a Macrolichen Everniastrum cirrhatum (Fr. Hale (Parmeliaceae

Directory of Open Access Journals (Sweden)

T. R. Prashith Kekuda

2011-01-01

Full Text Available In the present study, we investigated for the first time mineral composition, total phenol content and antioxidant activity of a foliose macrolichen Everniastrum cirrhatum (Fr. Hale (Parmeliaceae from Bhadra wildlife sanctuary, Karnataka, India. Mineral content of the lichen was estimated by Atomic absorption spectrophotometer after acid digestion. The secondary metabolites were detected by thin layer chromatography (TLC and phytochemical assays. The lichen material was extracted with methanol in soxhlet apparatus. Total phenol content was estimated by folin ciocalteu method. Antioxidant activity was determined by DPPH, Ferric reducing and metal chelating assays. Among the principal elements, calcium was found in high concentration followed by magnesium, potassium and phosphorus. Among trace elements, iron was detected in high amount followed by zinc, manganese and copper. The DPPH radical scavenging activity was found to be dose dependent with an IC50 of 6.73 μg/mL. In ferric reducing assay, the absorbance increased with the concentration of extract suggesting reducing power. The extract exhibited good metal chelating activity with an IC50 value of 29.28 μg/mL. Total phenol content was 101.2 mg tannic acid equivalents per gram of extract. Phytochemical analysis revealed the presence of alkaloids, saponins, tannins and terpenoids. TLC revealed atranorin, salazinic acid and protolichesterinic acid. The lichen can be consumed as a source of minerals required for the body as appreciable amount of minerals has been detected. The marked antioxidant activity may be attributed to the presence of phenol content in the extract. Further studies on isolation of metabolites and their bioactivities are under investigation.

The content of minerals and trace elements in meals

International Nuclear Information System (INIS)

Bognar, A.; Schelenz, R.; Gruenewald, T.; Frahm, H.; Heine, K.; Wiechen, A.; Bundesanstalt fuer Milchforschung, Kiel

1981-07-01

Within the frame work of the research programme 'School Feeding', 68 menu items of different producers were investigated for the content of the minerals calcium, chlorine, iron, potassium, magnesium, sodium and phosphorus, and for the trace elements antimony, barium, bromine, cesium, chromium, hafnium, iridium,cobalt, copper, manganese, mercury, rubidium, scandium, selenium, silver, strontium, tin and zinc. For the analytical determination of the elements, instrumental neutron activation analysis and X-ray fluorometry were applied. The studies showed that a calculation of the content of minerals and trace elements in meals on the basis of recipes and nutritive tables for raw foods is not justified, expect for sodium and phosphorus, because incorrect results can be obtained for the majority of meals. (orig./MG) [de

Static frictional resistance with the slide low-friction elastomeric ligature system.

Science.gov (United States)

Jones, Steven P; Ben Bihi, Saida

2009-11-01

This ex-vivo study compared the static frictional resistance of a low-friction ligation system against a conventional elastomeric module, and studied the effect of storage in a simulated oral environment on the static frictional resistance of both ligation systems. Eighty stainless steel brackets were tested by sliding along straight lengths of 0.018 inch round and 0.019 x 0.025 inch rectangular stainless steel wires ligated with either conventional elastomerics or the Slide system (Leone, Florence, Italy). During the tests the brackets and wires were lubricated with artificial saliva. A specially constructed jig assembly was used to hold the bracket and archwire securely. The jig was clamped in an Instron universal load testing machine. Crosshead speed was controlled via a microcomputer connected to the Instron machine. The static frictional forces at 0 degree bracket/wire angulation were measured for both systems, fresh from the pack and after storage in artificial saliva at 37 degrees C for 24 hours. The results of this investigation demonstrated that the Slide ligatures produced significantly lower static frictional resistance than conventional elastomeric modules in the fresh condition and after 24 hours of storage in a simulated oral environment (p static frictional resistance of conventional elastomeric modules and the Slide system (p = 0.525). The claim by the manufacturer that the Slide system produces lower frictional resistance than conventional elastomeric modules is upheld.

Mineral composition and ash content of six major energy crops

Energy Technology Data Exchange (ETDEWEB)

Monti, Andrea; Venturi, Gianpietro [Department of Agroenvironmental Science and Technologies (DiSTA), University of Bologna, Viale G. Fanin, 44, 40127 Bologna (Italy); Di Virgilio, Nicola [Institute of Biometeorology, National Research Council, Via P. Gobetti, 101 I, 40129 Bologna (Italy)

2008-03-15

The chemical composition of biofuels has not received adequate attention given that it is an important aspect in the introduction of energy crops. In this study, the ash content and mineral composition (C, N, Al, Ca, Cl, Fe, K, Mg, Na, P, S, Si) of stems, leaves and reproductive organs of some promising energy crops were determined and compared with the respective recommended thresholds reported in literature. Overall, cynara exhibited the highest ash and mineral contents, which indicate high slagging, fouling and corrosion tendencies. However, cynara also showed the lowest Si content, both in leaves (4.3 g kg{sup -1}) and in stems (0.9 g kg{sup -1}). Sweet sorghum and giant reed exhibited the highest N content (up to 16 g kg{sup -1}), which greatly exceeded the recommended limits in leaves. Importantly, Cl always exceeded the recommended limits (up to 18 mg kg{sup -1} in cynara), both in stems and in leaves, thus resulting in a major stumbling block for all crops. Several significant correlations among elements were found at a single plant part; conversely these correlations were generally very weak considering different plant components, with the exception of K (r=0.91**), P (r=0.94**) and ashes (r=0.64**). Generally, leaves resulted in a significant deterioration of biofuel quality when compared with stems and flower heads. Therefore, agricultural strategies aimed at reducing the leaf component (e.g. by delaying the harvest) may considerably improve the suitability of biofuels for current combustion plants. (author)

Mineral content of the honey produced in Zulia state, Venezuela.

Science.gov (United States)

Sulbarán de Ferrer, Betzabé; Ojeda de Rodríguez, Graciela; Peña, Jorge; Martínez, Janeth; Morán, María

2004-09-01

The mineral content of the honey produced in five zones of the Zulia state, Venezuela, during dry and rainy seasons was determined. The analyzed elements were: sodium, potassium (by emission spectroscopy), calcium, magnesium, copper, iron, manganese (by atomic absorption spectroscopy), phosphorus (phosphate ions, by colorimetric method), and ash content of raw honey samples directly collected from different beekeepers. The mean values for Na, K, Ca, Mg, Cu, Fe, Mn, and P were 353+84; 1774+138; 237+66; 52+24; 0.76+0.43; 13.5+10.23; 0.92+0.42 and 1642+323 mg/kg respectively. The mean ash content was 0.431+0.15%. Potassium was the most abundant of the elements determined. This results confirm that Zulian honey can be considered a good source of minerals.

Influence of bone marrow fat on the determination of bone mineral content by QCT

International Nuclear Information System (INIS)

Ikeda, Toshiaki; Sakurai, Kiyoko

1994-01-01

Single-energy quantitative CT (SEQCT) is thought to be suitable for long-term observation of changes in bone mineral content in individual patients. However, in patients with osteoporosis, an increase in bone marrow fat cannot be ignored. The relationship between bone marrow fat and bone mineral density (BMD) at different tube voltages of 80 kV and 120 kV was investigated using a set of solution phantoms that we devised, and was also studied in healthy volunteers. On the basis of the results obtained using the solution phantoms, the influence of bone marrow fat accounted for a decrease of 8.9 mg/cm 3 in BMD value at 80 kV and of 10.8 mg/cm 3 at 120 kV in the presence of 10 vol% fat. These findings suggested that the influence of fat was less at a lower tube voltage. The formulas used to estimate the true bone mineral and fat contents from the BMD values at low and high tube voltages were derived by eliminating the influence of beam hardening. Using these formulas, we studied healthy volunteers, and found that the difference between the true BMD value and the BMD value calibrated for beam hardening averaged 17.8 mg/cm 3 at 80 kV and 22.6 mg/cm 3 at 120 kV. Moreover, the estimated concentration of bone marrow fat in the volunteers averaged 25.0 vol%. In conclusion, because SEQCT performed at a low tube voltage is less influenced by bone marrow fat, it should be selected for assessment of the clinical response to therapy and for studying sequential changes. However, in patients with a low bone mineral content indicated by SEQCT, it would be worthwhile trying to estimate both true mineral and fat contents in bone using the formulas obtained in this study in order to differentiate decrease in bone mineral from interference by bone marrow fat. (author)

[Analysis of changes in minerals contents during cider fermentation process by inductively coupled plasma mass spectrometry].

Science.gov (United States)

Ye, Meng-qi; Yue, Tian-li; Gao, Zhen-peng; Yuan, Ya-hong; Nie, Gang

2015-01-01

The changes in mineral elements during cider fermentation process were determined using ICP-MS. The results showed that the main minerals in the fermentation liquor included K, Na, Ca, Mg, Fe, Mn, Zn, Cu, Sr and B. The content of K was the highest in both the apple juice and the cider, being 1 853. 83 and 1 654. 38 mg . L-1 respectively. The content of minerals was in dynamic changes along with the fermentation process. As a whole, during 72-120 h and 144-216 h, most of the minerals contents underwent great fluctuation. Especially when fermented for 192 h, the content of most of the minerals reached peak value or valley value. The content of Fe and Zn achieved their peak value, while the content of K, Na, Ca, Mg, Mn and B achieved valley value. But during the following 24 h, the content of minerals underwent a sharp reversal. After fermentation, the content of K, Mg, Cu, Zn and B decreased significantly, while the content of Na, Ca, Mn, Fe and Sr did not change significantly. The correlational analysis was conducted to evaluate the correlation between the mineral elements, and the result showed that the correlation between Ca and Mn was the most significant, with the correlation index reaching 0. 924. The information of this study will supply sufficient data for the fermentation process control and quality improvement of cider.

Evaluation of the cytotoxicity of elastomeric ligatures after sterilisation with 0.25% peracetic acid.

Science.gov (United States)

Pithon, Matheus Melo; dos Santos, Rogerio Lacerda; Judice, Renata Lima Pasini; de Assuncao, Paulo Sergio; Restle, Luciana

2013-11-01

Sterilisation using peracetic acid (PAA) has been advocated for orthodontic elastic bands. However, cane-loaded elastomeric ligatures can also become contaminated during processing, packaging, and manipulation before placement in the oral cavity and are therefore susceptible, and possible causes, of cross-contamination. To test the hypothesis that 0.25% peracetic acid (PAA), following the sterilisation of elastomers, influences the cytotoxicity of elastomeric ligatures on L929 cell lines. Four hundred and eighty silver elastomeric ligatures were divided into 4 groups of 120 ligatures to produce, Group TP (latex natural, bulk pack, TP Orthodontics), Group M1 (Polyurethane, bulk pack, Morelli), Group M2 (Polyurethane, cane-loaded, Morelli) and Group U (Polyurethane, cane-loaded, Uniden). Of the 120 ligatures in each group, 100 were sterilised in 0.25% PAA at time intervals (N = 20) of 1 hour, 2 hours, 3 hours, 4 hours and 5 hours. The 20 remaining elastomeric ligatures in each group were not sterilised and served as controls. Cytotoxicity was assessed using L929 cell lines and a dye-uptake method. Analysis of variance (ANOVA), followed by the Tukey post hoc test (p < 0.05) determined statistical relevance. There was a significant difference between TP, Morelli and Uniden elastomerics (p < 0.05), but no difference between the two types of Morelli elastomerics at the 1 hour time interval. In addition, there was a significant difference between Group CC and the other groups assessed, except between Groups CC and TP at the 1 hour time interval. The non-sterilised elastomeric ligatures showed similar cell viability to that observed after 1 hour of standard sterilisation. PAA did not significantly influence the cytotoxicity of elastomeric ligatures after a sterilisation time of 1 hour and is therefore recommended for clinical use.

Characterization of Italian honeys (Marche Region on the basis of their mineral content and some typical quality parameters

Directory of Open Access Journals (Sweden)

Cucina Domenico

2007-06-01

Full Text Available Abstract Background The characterization of three types of Marche (Italy honeys (Acacia, Multifloral, Honeydew was carried out on the basis of the their quality parameters (pH, sugar content, humidity and mineral content (Na, K, Ca, Mg, Cu, Fe, and Mn. Pattern recognition methods such as principal components analysis (PCA and linear discriminant analysis (LDA were performed in order to classify honey samples whose botanical origins were different, and identify the most discriminant parameters. Lastly, using ANOVA and correlations for all parameters, significant differences between diverse types of honey were examined. Results Most of the samples' water content showed good maturity (98% whilst pH values were in the range 3.50 – 4.21 confirming the good quality of the honeys analysed. Potassium was quantitatively the most relevant mineral (mean = 643 ppm, accounting for 79% of the total mineral content. The Ca, Na and Mg contents account for 14, 3 and 3% of the total mineral content respectively, while other minerals (Cu, Mn, Fe were present at very low levels. PCA explained 75% or more of the variance with the first two PC variables. The variables with higher discrimination power according to the multivariate statistical procedure were Mg and pH. On the other hand, all samples of acacia and honeydew, and more than 90% of samples of multifloral type have been correctly classified using the LDA. ANOVA shows significant differences between diverse floral origins for all variables except sugar, moisture and Fe. Conclusion In general, the analytical results obtained for the Marche honeys indicate the products' high quality. The determination of physicochemical parameters and mineral content in combination with modern statistical techniques can be a useful tool for honey classification.

Tribological properties and morphology of bimodal elastomeric nitrile butadiene rubber networks

International Nuclear Information System (INIS)

Guo, Yin; Wang, Jiaxu; Li, Kang; Ding, Xingwu

2013-01-01

Highlights: • Bimodal elastomeric NBR as a new material was developed. • The structure of bimodal elastomeric NBR networks was determined. • The relationship between structure and mechanical properties was investigated. • The tribological properties and mechanisms of bimodal NBR were analyzed. • The benefits of bimodal NBR in the field of tribology were discussed. - Abstract: Bimodal nitrile butadiene rubber (NBR) was examined in this study. The molecular structure was determined by dynamic mechanical analysis and transmission electron microscopy. The relationship between the structure and the mechanical properties related to elastomeric tribological properties was investigated. The properties and the mechanisms of friction and wear of bimodal elastomeric NBR networks were also analyzed. The lubricating characteristics of bimodal NBR networks were revealed based on the mechanisms of friction and wear. Results show that bimodal NBR networks are similar to bimodal polydimethylsiloxane networks. The form and density of the network structure can be controlled from elastomeric networks to thermosetting resin networks. The mechanical properties of bimodal NBR networks, such as elasticity, elongation at break, fatigue characteristic, tensile strength, elastic modulus, and thermal stability can be precisely controlled following the variation in network structure. The friction, wear, and lubrication of bimodal NBR networks can be clearly described according to the principles of tribology. Common elastomers cannot simultaneously reduce friction and wear because of the different mechanisms of friction and wear; however, bimodal elastomer networks can efficiently address this problem

Characterization of element and mineral content in Artemisia annua ...

African Journals Online (AJOL)

Characterization of element and mineral content in Artemisia annua and Camellia sinensis leaves by handheld X-ray fluorescence. Traore Alassane, Diallo Mouhamadou, Gueye Papa El Hadji Omar, Wague Ahmadou, Lutgen Pierre, Sarr Ousmane, Mboup Souleymane ...

Force decay of elastomeric chains - a mechanical design and product comparison study.

Science.gov (United States)

Balhoff, David A; Shuldberg, Matthew; Hagan, Joseph L; Ballard, Richard W; Armbruster, Paul C

2011-03-01

To evaluate the percentage force decay of elastomeric chain products utilizing three different design mechanisms simulating canine retraction; and to evaluate the percentage force decay of elastomeric chain products from four different companies. In vitro, laboratory study. LSUHSC Dental School, New Orleans, LA, USA. Closed (non-spaced), grey elastomeric chains from four companies were selected for the study. Three acrylic resin jigs were constructed to provide a framework for three simulated space closure mechanisms. The 6-5-3, the chain loop, and the 6-3 were the configuration mechanisms used in the study. An electronic force gauge was used to measure the percentage force decay associated with each elastomeric chain over 28 days at preselected times. There was a significant difference in the mean percentage force decay for the three different mechanisms (P < 0·001). For all four companies, the 6-3 mechanical design had the smallest mean percentage force decay. There was a significant difference in the mean percentage force decay for the different companies (P < 0·001). For all three mechanisms, Ormco had the smallest percentage force decay while Unitek had the highest percentage force decay. The significant difference in the mean percentage force decay for the different mechanisms suggests that the 6-3 design is a more efficient means of closing extraction spaces utilizing elastomeric chains.

Adjustment of Part Properties for an Elastomeric Laser Sintering Material

Science.gov (United States)

Wegner, A.; Ünlü, T.

2018-03-01

Laser sintering of polymers is gaining more and more importance within the field of small series productions. Polyamide 12 is predominantly used, although a variety of other materials are also available for the laser sintering process. For example, elastomeric, rubberlike materials offer very different part property profiles. Those make the production of flexible parts like, e.g., sealings, flexible tubes or shoe soles possible because they offer high part ductility and low hardness. At the chair for manufacturing technology, a new elastomeric laser sintering material has been developed and then commercialized by a spin-off from university. The aim of the presented study was the analysis of the new material's properties. Proof was found that Shore hardness can be modified by varying the parameter settings. Therefore, the correlation between process parameters, energy input, Shore hardness and other part properties like mechanical properties were analyzed. Based on these results, suitable parameter settings were established which lead to the possibility of producing parts with different Shore hardnesses.

The flow Rate Accuracy of Elastomeric Infusion Pumps After Repeated Filling.

Science.gov (United States)

Mohseni, Masood; Ebneshahidi, Amin

2014-05-01

One of the frequent applications of elastomeric infusion pumps is postoperative pain management. In daily practice, the disposable pumps get refilled with modified medication combinations in the successive days; although, the accuracy of infusion rates is unknown to clinicians. Our aim was to evaluate the effect of repeated filling on the delivery rate accuracy of an elastomeric pump available in our market. We examined 10 elastomeric infusion pumps (BOT-802, Nanchang Biotek Medical Device Company, China) with 100 mL capacity and nominal flow of 5 mL/h. Each pump was filled for three times, accounting for 30 series of experiments. A microset scaled in mL was used to measure the pump deliveries. Flow profile and reliability of infusion rate were analyzed after repeated use. The mean flow rate in the three series of measurements showed a gradual increase; however, the difference was not statistically significant (5.01 ± 0.07 vs. 5.03 ± 0.06 vs. 5.06 ± 0.08 mL/h; P = 0.81). The percentage of the flow rate error (deviation from 5 mL/h ± 15%) was 100% in the first and second hours of infusion, 96% in the third hour, 60% in the 20th hour and zero percent in the rest of the infusion time. This study indicated that the delivery rate accuracy of elastomeric infusion pumps is preserved after repeated usage. These laboratory findings suggested that elastomeric pumps could be safely refilled in the successive days to provide postoperative analgesia.

Effects of lactation on bone mineral content in healthy postpartum women

International Nuclear Information System (INIS)

Hayslip, C.C.; Klein, T.A.; Wray, H.L.; Duncan, W.E.

1989-01-01

Bone mineral contents were estimated by dual photon absorptiometry of the lumbar spine (L2-L4) and single photon absorptiometry of the mid- and distal radius in 19 healthy women on their second postpartum day and at 6 months postpartum. All bone mineral measurements were performed by one technician, and the single and dual photon absorptiometry results were read by one observer. Daily oral calcium intakes were estimated from dietary histories obtained by a dietitian. Twelve women who breast-fed exclusively throughout the first 6 months postpartum were compared with seven formula-feeding women who did not breast-feed or who breast-fed for less than 3 months postpartum. No differences were found in age, parity, height, weight, or daily calcium intake between the breast- and formula-feeding women. Breast-feeding women had a significant decrease (averaging 6.5%) in bone mineral of the lumbar spine at 6 months postpartum as compared with 2 days postpartum (1.14 +/- 0.03 versus 1.22 +/- 0.03 g/cm2, mean +/- SEM; P less than .001), whereas no significant change occurred in the formula-feeding women at 6 months (1.24 +/- 0.03 versus 1.26 +/- 0.04 g/cm2). At 6 months postpartum, the breast-feeding women had a significantly lower mean bone mineral content of the lumbar spine than did formula-feeding women (P less than .05). No significant changes were noted in bone mineral content of the mid- or distal radius in either group of women during the period of evaluation. We conclude that during the first 6 months postpartum, breast-feeding is associated with bone mineral loss from the lumbar spine, but not from the mid- or distal radius

Studies of coherent/Compton scattering method for bone mineral content measurement

International Nuclear Information System (INIS)

Sakurai, Kiyoko; Iwanami, Shigeru; Nakazawa, Keiji; Matsubayashi, Takashi; Imamura, Keiko.

1980-01-01

A measurement of bone mineral content by a coherent/Compton scattering method was described. A bone sample was irradiated by a collimated narrow beam of 59.6 keV gamma-rays emitted from a 300 mCi 241 Am source, and the scattered radiations were detected using a collimated pure germanium detector placed at 90 0 to the incident beam. The ratio of coherent to Compton peaks in a spectrum of the scattered radiations depends on the bone mineral content of the bone sample. The advantage of this method is that bone mineral content of a small region in a bone can be accurately measured. Assuming that bone consists of two components, protein and bone mineral, and that the mass absorption coefficient for Compton scattering is independent of material, the coherent to Compton scattering ratio is linearly related to the percentage in weight of bone mineral. A calibration curve was obtained by measuring standard samples which were mixed with Ca 3 (PO 4 ) 2 and H 2 O. The error due to the assumption about the mass absorption coefficient for Compton scattering and to the difference between true bone and standard samples was estimated to be less than 3% within the range from 10 to 60% in weight of bone mineral. The fat in bone affects an estimated value by only 1.5% when it is 20% in weight. For the clinical application of this method, the location to be analyzed should be selected before the measurement with two X-ray images viewed from the source and the detector. These views would be also used to correct the difference in absorption between coherent and Compton scattered radiations whose energies are slightly different from each other. The absorbed dose to the analyzed region was approximately 150 mrad. The time required for one measurement in this study was about 10 minutes. (author)

Effect of commonly used beverage, soft drink, and mouthwash on force delivered by elastomeric chain: a comparative in vitro study.

Science.gov (United States)

Kumar, Kiran; Shetty, Sharath; Krithika, M J; Cyriac, Bobby

2014-06-01

The objective was to evaluate and compare the effect of Coca-Cola®, tea, Listerine® mouthwash on the force delivered by elastomeric chain in vitro. Four specimen groups (distilled water, Coca-Cola®, tea, Listerine® mouthwash) with a total sample size of 480 specimens. A specimen is described as a four link grey close elastomeric chain. Jigs, each with a series of pins set 25 mm apart, was used to hold stretched elastomeric chains at a constant length. These jigs allowed for complete submersion of the elastomeric chain in a water bath throughout the test period, as well as the dipping of elastomeric chains in respective control and test solutions. For 60 s, twice a day, groups were exposed to the respective solutions, the two daily exposure was separated by 9 h and force measurements were taken at six time points during the experiment, that is, 1 h, 24 h, 7 days, 14 days, 21 days, and 28 days. Force measurements were made by Instron machine by a single blinded examiner with the help of a second examiner. It was found out that there was highly significant difference between groups control, Coca-Cola®, Listerine®, and tea as well as there was highly significant (p Coca-Cola® and the Listerine® group reached a plateau between 7 and 21 days then decrease between 21 and 28 days. The tea group showed plateau phase between 7 and 28 days. After 28 days in the control group, 25% force decay occurred while the test groups force decay of 30-50% occurred. Coca-Cola®, Listerine® mouthwash, and tea cause an increase in force decay of elastomeric chains over time. Tea caused highest force decay followed by Listerine® and Coca-Cola® when compared to control group. How to cite the article: Kumar K, Shetty S, Krithika MJ, Cyriac B. Effect of commonly used beverage, soft drink, and mouthwash on force delivered by elastomeric chain: A comparative in vitro study. J Int Oral Health 2014;6(3):7-10.

High-latitude steppe vegetation and the mineral nutrition of Pleistocene herbivores

Science.gov (United States)

Davydov, S. P.; Davydova, A.; Makarevich, R.; Loranty, M. M.; Boeskorov, G.

2014-12-01

High-latitude steppes were widespread and zonal in the Late Pleistocene and formed a landscape basis for the Mammoth Biome. Now the patches of these steppes survived on steep slopes under southern aspects. These steppes serve as unique information sources about the Late Pleistocene "Mammoth" steppe. Numerous data obtained by palynological, carpological, and DNA analysis of plant remains from feces and stomach contents of Pleistocene herbivore mummies, as well as from buried soils and enclosing deposits show that they are similar to modern steppe plant assemblage in taxa composition. Plant's nutrient concentrations are of fundamental importance across Pleistocene grass-rich ecosystems because of their role in the support of large herbivores. The average weight of an adult mammoth skeleton (about 0.5 tons) and of a woolly rhinoceros (about 0.2 tons) clearly suggests this. Detailed studies on fossil bone remains showed mineral deficiency in large Pleistocene herbivores. A three-year study of ash and mineral contents of two types of relict steppe vegetation at the Kolyma Lowland, Arctic Siberia has been carried out. Nowadays refugia of similar vegetation are located not far (1 - 15km) from the Yedoma permafrost outcrops were abundant fossil remains are found. Dominant species of the steppe vegetation were sampled. Preliminary studies indicate that the ash-content varied 1.5-2 times in speceies of steppe herbs. The Ca, P, Mg, K element contents was higher for most steppe species than in the local herbaceous vegetation, especially in Ca and P. One of the most important elements of the mineral nutrition, the phosphorus, was always found in higher concentrations in the steppe vegetation than in plants of recently dominant landscapes of the study area. It should be noted that the mineral nutrient content of the modern steppe vegetation of Siberian Arctic is comparable to that of the recent zonal steppe of Transbaikal Region. This study supports the hypothesis that

Flexible Connection Elastomeric Rubber as a Pounding Resisting Element between Two Adjacent Buildings

Directory of Open Access Journals (Sweden)

Yuskar Lase

2013-03-01

Full Text Available To solve pounding problem of two adjacent buildings, structural designer usually employs a dilatation between the structures or make the two structures as a monolith structure. Other alternative is by using an elastomeric rubber as a pounding resisting element between the two structures. Effectiveness in applying elastomeric rubber component as flexible connection of two adjacent structures is the main focus of this paper. Various simulations such as structure models, earthquake excitations and openings in gap element are studied. Observation of maximum structural responses will be performed for structure model with elastomeric rubber in comparison with (1 monolith structure model and (2 structure model with rigid element (steel element. Simulation results show that application of elastomeric rubber component to prevent structures from pounding problem provides advantages especially in reducing internal forces in the shorter building. However, it slightly increases displacement of both structures.

Glass interface effect on high-strain-rate tensile response of a soft polyurethane elastomeric polymer material

NARCIS (Netherlands)

Fan, J.T.; Weerheijm, J.; Sluys, L.J.

2015-01-01

The glass interface effect on dynamic tensile response of a soft polyurethane elastomeric polymer material has been investigated by subjecting a glass-polymer system of this polymer material matrix embedded a single 3 mm-diameter glass particle to impact loading in a split Hopkinson tension bar

Biomass, Mineral Elements and Protein Contents of Six Freshwater ...

African Journals Online (AJOL)

The biomass, mineral elements and protein contents of six freshwater macrophytes found in Ghana are reported in this paper. The plants are Ceratophyllum demersum (a submerged plant), Eichhornia crassipes and Pistia stratiotes (free-floating plants), Echinochloa pyramidalis and Typha domingensis (emergent plants) ...

Measurement of hand bone mineral content using single-photon absorptiometry

International Nuclear Information System (INIS)

Nicoll, J.J.; Smith, M.A.; Law, E.; Tothill, P.; Reid, D.; Brown, N.; Nuki, G.

1987-01-01

A single photon absorption imaging technique has been developed to assess the bone mass of the hand, especially in patients with rheumatoid arthritis or bronchial asthma. A modified rectilinear scanner images the hand by transmission scanning in a water bath with a 7.4 GBq 125 I source. A microcomputer is used to calculate the bone mineral distribution, and the total bone mineral content (BMC) of the hand is determined from that distribution. The precision (coefficient of variation) of the measurement is 1.9%. A control population of 20 men and 58 women has been studied to determine normal variations in hand bone mineral content with age, sex, body size, hand volume and years since menopause. The normal men are found to have an average hand BMC of 25.1 g with a coefficient of variation (CV) of 22%, which is reduced to 12% by normalising for body size using span. The normal women had an average hand BMC of 18.0 g +- 15%. The CV is reduced to 13% by normalising for span and years post-menopause. (author)

A REVIEW OF QUANTITATIVE METHODS FOR STUDIES OF MINERAL-CONTENT OF INTRAORAL INCIPIENT CARIES LESIONS

NARCIS (Netherlands)

TENBOSCH, JJ; ANGMARMANSSON, B

Modern prospective caries studies require the measurement of small changes in tooth mineral content. Quantitative measurements of changes in mineral content in a single caries lesion is desirable. Quantitative methods can be either destructive or non-destructive. The latter type permits longitudinal

Engineered elastomeric proteins with dual elasticity can be controlled by a molecular regulator.

Science.gov (United States)

Cao, Yi; Li, Hongbin

2008-08-01

Elastomeric proteins are molecular springs that confer excellent mechanical properties to many biological tissues and biomaterials. Depending on the role performed by the tissue or biomaterial, elastomeric proteins can behave as molecular springs or shock absorbers. Here we combine single-molecule atomic force microscopy and protein engineering techniques to create elastomeric proteins that can switch between two distinct types of mechanical behaviour in response to the binding of a molecular regulator. The proteins are mechanically labile by design and behave as entropic springs with an elasticity that is governed by their configurational entropy. However, when a molecular regulator binds to the protein, it switches into a mechanically stable state and can act as a shock absorber. These engineered proteins effectively mimic and combine the two extreme forms of elastic behaviour found in natural elastomeric proteins, and thus represent a new type of smart nanomaterial that will find potential applications in nanomechanics and material sciences.

Unvulcanized elastomeric waterproofing materials for construction application

Directory of Open Access Journals (Sweden)

O. V. Karmanova

2016-01-01

Full Text Available In the construction was widespread elastomer profiles, which have the ability to swell in water. Such products should have a high capacity for swelling, elasticity, resistance to weathering. At the present time for these purposes are used materials, mostly of foreign origin. With the increasing pace of construction in Russia the problem of replacement of imported materials is particularly relevant. The work was dedicated to the creation of water-swellable elastomer materials using bentonite powders and study of their properties. Сomparative testing of imported and domestic hydrophilic sealants were held. Rationale and choice of components for the cords of bentonite was conducted. Polymer base is saturated ethylene-propylene rubber. Bentonite from different manufacturers used to increase the swelling of the samples. Filler added in an amount of 50–100 phr. The elastomeric compositions were prepared using laboratory roller at a temperature of 60 ± 5° C. Profiling was performed on a syringe-machine at a temperature of 120° C. Extrusion indicator of the mixtures were evaluated on a 10-point scale (German-Russian system. It is found that high swelling products provided using field Azerbaijan bentonite. It is noted that the dosage of bentonite than 150 w.p. deteriorates technological properties of bentonite cords. It has been shown that activation of the bentonite and sodium carbonate chloride can significantly improve product swelling, wherein the bentonite content of the composition was 150–200 w.p.

Tribologically modified surfaces on elastomeric materials

NARCIS (Netherlands)

Rodriguez, N.V.; Masen, Marc Arthur; Schipper, Dirk J.

2013-01-01

As the result of tribological loading, the properties of the surface of elastomeric materials will alter. This effect has been observed using SEM and EDS analysis of the tread of a used car tyre, where differences in structure between the substrate and the area near the surface were found. To study

Mineral and water content of A. gigas scales determine local micromechanical properties and energy dissipation mechanisms

Science.gov (United States)

Troncoso, Omar P.; Gigos, Florian; Torres, Fernando G.

2017-11-01

Arapaima gigas scales are natural laminated composite materials made of individual layers with different degrees of mineralization, accompanied of varying mechanical properties. This natural design provides scales with hardness and flexibility, and can serve as a source of inspiration for the development of new layered composites with a hard surface and flexible base. In this paper, we have carried out cyclic micro-indentation tests on both; the internal and the highly mineralized external surface of air dried and wet scales, in order to assess the variation of their local micromechanical properties with regard to the mineral and water content. The load-penetration (P-h) curves showed that creep takes place throughout the application of a constant force during the micro-indentation tests, confirming the time dependent response of A. gigas scales. A model that accounted for the elastic, plastic and viscous responses of the samples was used to fit the experimental results. The penetration depth during loading and creep, as well as the energy dissipated are dependent on the water content. The used model suggests that the viscous response of the internal layer increases with the water content.

Enhancement of Au-Ag-Te contents in tellurium-bearing ore minerals via bioleaching

Science.gov (United States)

Choi, Nag-Choul; Cho, Kang Hee; Kim, Bong Ju; Lee, Soonjae; Park, Cheon Young

2018-03-01

The purpose of this study was to enhance the content of valuable metals, such as Au, Ag, and Te, in tellurium-bearing minerals via bioleaching. The ore samples composed of invisible Au and Au paragenesis minerals (such as pyrite, chalcopyrite, sphalerite and galena) in combination with tellurium-bearing minerals (hessite, sylvanite and Tellurobismuthite) were studied. Indigenous microbes from mine drainage were isolated and identified as Acidithiobacillus ferrooxidans, which were used in bioleaching after adaption to copper. The effect of the microbial adaption on the bioleaching performance was then compared with the results produced by the non-adaptive process. The microbial adaption enhanced the Au-Ag-Te contents in biological leaching of tellurium-bearing ore minerals. This suggests that bioleaching with adapted microbes can be used both as a pretreatment and in the main recovery processes of valuable metals.

Mineral, vitamin C and crude protein contents in kale (Brassica ...

African Journals Online (AJOL)

ajl yemi

2011-10-27

Oct 27, 2011 ... Key words: Kale (Brassica oleracea var. acephala), harvesting stage, vitamin C, crude protein, mineral content. .... L-ascorbic acid (or vitamin C) in plant tissues. .... Cooking methods of Brassica rapa affect the preservation of.

Power turbine dynamics - An evaluation of a shear-mounted elastomeric damper

Science.gov (United States)

Zorzi, E. S.; Walton, J.; Cunningham, R.

1983-01-01

As an alternative to the more conventional squeeze-film bearing damper designs, a Viton-70 shear-mounted, elastomeric damper was built and tested in a T-55 power turbine high-speed balancing rig. This application demonstrated, for the first time, the feasibility of using elastomers as the primary rotor damping source in production turbine engine hardware. The shear-mounted damper design was selected because of its compatibility with actual gas turbine engine radial space constraints, its accommodation of both the radial and axial thrust loads present in gas turbine engines, and its capability of controlled axial preload. Test results showed that the Viton-70 elastomeric damper operated successfully and provided excellent control of both synchronous and nonsynchronous vibrations through all phases of testing to the maximum rotor speed of 1676 rad/s (16,000 rpm). Excellent correlation between the predicted and experienced critical speeds, mode shapes, and log decrements for the power turbine rotor and elastomer damper assembly was also achieved.

Sugar Profile, Mineral Content, and Rheological and Thermal Properties of an Isomerized Sweet Potato Starch Syrup

Directory of Open Access Journals (Sweden)

Brunson Dominque

2013-01-01

Full Text Available Currently, corn is used to produce more than 85% of the world’s high fructose syrup (HFS. There is a search for alternative HFS substrates because of increased food demand and shrinking economies, especially in the developing world. The sweet potato is a feasible, alternative raw material. This study isomerized a high glucose sweet potato starch syrup (SPSS and determined its sugar profile, mineral content, and rheological and thermal properties. Rheological and thermal properties were measured using a rheometer and DSC, respectively. Sweet potato starch was hydrolyzed to syrup with a mean fructose content of 7.6±0.4%. The SPSS had significantly higher (P<0.05 mineral content when compared to commercial ginger and pancake syrups. During 70 days of storage, the SPSS acted as a non-Newtonian, shear-thinning liquid in which the viscosity decreased as shear stress increased. Water loss temperature of the SPSS continually decreased during storage, while pancake and ginger syrups’ peak water loss temperature decreased initially and then increased. Further and more detailed studies should be designed to further enhance the fructose content of the syrup and observe its stability beyond 70 days. The SPSS has the potential to be used in human food systems in space and on Earth.

Biodegradable elastomeric scaffolds for soft tissue engineering

NARCIS (Netherlands)

Pêgo, A.P.; Poot, Andreas A.; Grijpma, Dirk W.; Feijen, Jan

2003-01-01

Elastomeric copolymers of 1,3-trimethylene carbonate (TMC) and ε-caprolactone (CL) and copolymers of TMC and D,L-lactide (DLLA) have been evaluated as candidate materials for the preparation of biodegradable scaffolds for soft tissue engineering. TMC-DLLA copolymers are amorphous and degrade more

The correlation between metacarpal bone mineral content and bone mineral density of the jawbone in implant patients

International Nuclear Information System (INIS)

Kuroda, Toshinobu; Takamori, Hitoshi; Yosue, Takashi

2006-01-01

This study estimated the relationship between metacarpal bone mineral content and jawbone density. The subjects were 141 patients who desired implant treatment and had undergone a thorough pre-operative CT examination. In the maxilla, bone mineral density (BMD) was measured at the cancellous bone between the nasal cavity and the maxillary sinus. In the mandible, BMD was measured at the cancellous bone beneath the mental foramen. The CT numbers were corrected by the quantitative computer tomography (QCT) method. Furthermore, the cortical indices of the mandible, i.e. C-PMI (Central-Panoramic Mandibular Index), and MCW (Mandibular Cortical Width) were measured and calculated from panoramic radiographs. The bone mineral content of the total body was obtained by ΣGS/D and MCI through Microdensitometry. The following results were obtained. Between the maxillary BMD and ΣGS/D and between the mandibular BMD and ΣGS/D, there was a correlation in females but no correlation in males. Between the maxillary BMD and MCI, there was a correlation in females but no correlation in males. However, in the mandibular BMD and MCI there was no correlation in females and males. Between C-PMI and ΣGS/D there was a correlation in both females and males. Between C-PMI and MCI there was a correlation in both females and males. Between MCW and ΣGS/D there was a correlation in both females and males. Between MCW and MCI there was a correlation in females, but no correlation in males. From the above results, it was concluded that the maxillary BMD and the cortical index of the mandible reflected changes in the metacarpal bone mineral content, while mandibular BMD did not. (author)

Mineral Content in Leaves of Tomato Plants Grafted on Solanum Rootstocks

OpenAIRE

松添, 直隆; 間, 浩美; 花田, 勝美; モハメド, アリ; 大久保, 敬; 藤枝, 國光

1995-01-01

Nutrient uptake of tomato plants cv. Momotaro grafted on Solanum sisymbriifoliulm, S. torvum and S. toxicarium which are resistant to soil-born disease were compared with tomato grafted on its own root, a tomato/tomato, scion/rootstock combination. Mineral content in leaves of tomato/S. sisymbriifoliulm was nearly equal to that of tomato/tomato. In leaves of tomato/S. torvum, nitrogen content was higher, and magnesium content was lower than those of tomato/tomato. Furthermore, phosphorus and ...

Nuclear medical methods for determination of bone mineral content

International Nuclear Information System (INIS)

Fischer, M.; Kempers, B.; Tschepke, H.D.; Spitz, J.

1988-01-01

Osteoporosis is becoming recognized as a major social and economical health problem. Bone mineral content (BMC) depends on many hormonal and metabolic factors. The pathophysiological mechanism of the loss of bone mass is still unclear. For preventive diagnosis and treatment of osteoporosis, quantitative technology is required that will measure BMC with high precision and reproducibility. Nuclear medical methods permit the BMC of the appendicular skeleton to be measured by single photon absorptiometry. Whole-body BMC, as well as spine and femur BMC, can be measured by dual photon absorptiometry. The results from both procedures are reasonably precise and correlate well with the ash weight of isolated bone. The radiation exposure level in both SPA and DPA is low. SPA and DPA may be used for cost-effective screening of high-risk patients to predict the likelihood of future fractures and control osteoporosis therapy. (orig.) [de

Determination of mineral contents of wild Boletus edulis mushroom and its edible safety assessment.

Science.gov (United States)

Su, Jiuyan; Zhang, Ji; Li, Jieqing; Li, Tao; Liu, Honggao; Wang, Yuanzhong

2018-04-06

This study aimed to determine the contents of main mineral elements of wild Boletus edulis and to assess its edible safety, which may provide scientific evidence for the utilization of this species. Fourteen mineral contents (Ba, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Na, Ni, Sr, V and Zn) in the caps and stipes of B. edulis as well as the corresponding surface soils collected from nine different geographic regions in Yunnan Province, southwest China were determined. The analyses were performed using inductively coupled plasma atomic emission spectrometer (ICP-AES) after microwave digestion. Measurement data were analyzed using variance and Pearson correlation analysis. Edible safety was evaluated according to the provisionally tolerable weekly intake (PTWI) of heavy metals recommended by United Nations Food and Agriculture Organization and World Health Organization (FAO/WHO). Mineral contents were significantly different with the variance of collection areas. B. edulis showed relative abundant contents of Ca, Fe, Mg and Na, followed by Ba, Cr, Cu, Mn and Zn, and the elements with the lower content less were Cd, Co, Ni, Sr and V. The elements accumulation differed significantly in caps and stipes. Among them, Cd and Zn were bioconcentrated (BCF > 1) while others were bioexcluded (BCF < 1). The mineral contents in B. edulis and its surface soil were positively related, indicating that the elements accumulation level was related to soil background. In addition, from the perspective of food safety, if an adult (60 kg) eats 300 g fresh B. edulis per week, the intake of Cd in most of tested mushrooms were lower than PTWI value whereas the Cd intakes in some other samples were higher than this standard. The results indicated that the main mineral contents in B. edulis were significantly different with respect to geographical distribution, and the Cd intake in a few of regions was higher than the acceptable intakes with a potential risk.

MINERALS, MICROELEMENTS AND POLYPHENOLS CONTENT IN THE SOYBEAN VARIETIES GROWN IN DIFFERENT LOCALITIES OF SLOVAKIA

Directory of Open Access Journals (Sweden)

Mária Timoracká

2015-02-01

Full Text Available The aim of this study was to evaluate the influence of the grown locality on minerals and risky metal intake from the soil and on polyphenols formation in the soybean seeds. The research was realised in five localities of Slovakia using the seven soybean varieties. From the point of the soil hygiene, all determined values of heavy metals content in soils were lower than given hygienic limits, with the exception of Cd. Minerals and heavy metals contents in the soybean samples show significant differences between cultivars and localities. The values show imbalance between the potassium contents and other minerals. The order of the elements levels was determined as following: Fe > Zn > Mn > Cu > Ni > Pb > Cr ≈ Co > Cd. The risky elements contents, with exception of Cd, Cu, Pb and Ni content (only in some localities, did not exceed a limit for legumes by Food Codex SR. The total polyphenols content ranged from 817.6 to 1281.0 μg eq. tannic acid/g and suggest the variety dependence, but the locality influence was not significantly confirmed.

Quantitative determination of bone mineral content (QCT) - intercomparison of computer tomographs of the same construction

International Nuclear Information System (INIS)

Andresen, R.; Banzer, D.; Felsenberg, D.; Wolf, K.J.

1994-01-01

An intercomparison of 4 CT scanners of the same manufacturer was performed. The bone mineral content of 11 lumbar vertebral columns removed directly post mortem was determined in a specially constructed lucite-water phantom. Even devices of the same construction were shown to yield a variation in the quantitative evaluation markedly exceeding the annual physiological mineral loss. As long as scanner adjustment by physical calibration phantoms has not yet been established, a course assessment and therapy control of bone mineral content should always be carried out on the same QCT scanner. (orig.) [de

Normal values for bone mineral content measured by dual photon absorptiometry in children

International Nuclear Information System (INIS)

Tison, F.; Lecouffe, P.; Rousseau, J.; Marchandise, X.; Ythier, H.

1990-01-01

The results of dual photon absorptiometry measurements in 43 normal children are analyzed. Results were correlated with age, body weight, and stature. Reference stature-specific values for bone mineral content in children are proposed. Furthermore, the results show that mineralization continues beyond the end of statural growth [fr

Analysis of human serum and whole blood for mineral content by ICP-MS and ICP-OES: development of a mineralomics method.

Science.gov (United States)

Harrington, James M; Young, Daniel J; Essader, Amal S; Sumner, Susan J; Levine, Keith E

2014-07-01

Minerals are inorganic compounds that are essential to the support of a variety of biological functions. Understanding the range and variability of the content of these minerals in biological samples can provide insight into the relationships between mineral content and the health of individuals. In particular, abnormal mineral content may serve as an indicator of illness. The development of robust, reliable analytical methods for the determination of the mineral content of biological samples is essential to developing biological models for understanding the relationship between minerals and illnesses. This paper describes a method for the analysis of the mineral content of small volumes of serum and whole blood samples from healthy individuals. Interday and intraday precision for the mineral content of the blood (250 μL) and serum (250 μL) samples was measured for eight essential minerals--sodium (Na), calcium (Ca), magnesium (Mg), potassium (K), iron (Fe), zinc (Zn), copper (Cu), and selenium (Se)--by plasma spectrometric methods and ranged from 0.635 to 10.1% relative standard deviation (RSD) for serum and 0.348-5.98% for whole blood. A comparison of the determined ranges for ten serum samples and six whole blood samples provided good agreement with literature reference ranges. The results demonstrate that the digestion and analysis methods can be used to reliably measure the content of these minerals and potentially of other minerals.

Mineral content of the peripheral skeleton in patients with diabetes mellitus

International Nuclear Information System (INIS)

Vogl, T.; Frey, K.W.; Rohloff, R.; Doerfler, H.; Muenchen Univ.

1981-01-01

In order to determine the effect of diabetes mellitus on bone mineral content, measurements with the iodine 125 isotope method of Cameron were carried out in the distal ulna and calcaneus of 40 patients. 38% of female and 20% of male diabetic patients showed abnormally low values. The most severe changes were found in patients with complications of diabetes. There was a correlation between the duration of the diabetes and the severity of the mineral loss. (orig.) [de

Mineral content of the peripheral skeleton in patients with diabetes mellitus

Energy Technology Data Exchange (ETDEWEB)

Vogl, T; Frey, K W; Rohloff, R; Doerfler, H

1981-07-01

In order to determine the effect of diabetes mellitus on bone mineral content, measurements with the iodine 125 isotope method of Cameron were carried out in the distal ulna and calcaneus of 40 patients. 38% of female and 20% of male diabetic patients showed abnormally low values. The most severe changes were found in patients with complications of diabetes. There was a correlation between the duration of the diabetes and the severity of the mineral loss.

Highly Magneto-Responsive Elastomeric Films Created by a Two-Step Fabrication Process

KAUST Repository

Marchi, Sophie

2015-08-24

An innovative method for the preparation of elastomeric magnetic films with increased magneto-responsivity is presented. Polymeric films containing aligned magnetic microchains throughout their thickness are formed upon the magnetophoretic transport and assembly of microparticles during polymer curing. The obtained films are subsequently magnetized at a high magnetic field of 3 T directed parallel to the orientation of the microchains. We prove that the combination of both alignment of the particles along a favorable direction during curing and the subsequent magnetization of the solid films induces an impressive increase of the films’ deflection. Specifically, the displacements reach few millimeters, up to 85 times higher than those of the nontreated films with the same particle concentration. Such a process can improve the performance of the magnetic films without increasing the amount of magnetic fillers and, thus, without compromising the mechanical properties of the resulting composites. The proposed method can be used for the fabrication of magnetic films suitable as components in systems in which large displacements at relatively low magnetic fields are required, such as sensors and drug delivery or microfluidic systems, especially where remote control of valves is requested to achieve appropriate flow and mixing of liquids.

Highly Magneto-Responsive Elastomeric Films Created by a Two-Step Fabrication Process

KAUST Repository

Marchi, Sophie; Casu, Alberto; Bertora, Franco; Athanassiou, Athanassia; Fragouli, Despina

2015-01-01

An innovative method for the preparation of elastomeric magnetic films with increased magneto-responsivity is presented. Polymeric films containing aligned magnetic microchains throughout their thickness are formed upon the magnetophoretic transport and assembly of microparticles during polymer curing. The obtained films are subsequently magnetized at a high magnetic field of 3 T directed parallel to the orientation of the microchains. We prove that the combination of both alignment of the particles along a favorable direction during curing and the subsequent magnetization of the solid films induces an impressive increase of the films’ deflection. Specifically, the displacements reach few millimeters, up to 85 times higher than those of the nontreated films with the same particle concentration. Such a process can improve the performance of the magnetic films without increasing the amount of magnetic fillers and, thus, without compromising the mechanical properties of the resulting composites. The proposed method can be used for the fabrication of magnetic films suitable as components in systems in which large displacements at relatively low magnetic fields are required, such as sensors and drug delivery or microfluidic systems, especially where remote control of valves is requested to achieve appropriate flow and mixing of liquids.

Chemical Stability of Telavancin in Elastomeric Pumps

Directory of Open Access Journals (Sweden)

Patrick Sand, MSc

2015-12-01

Conclusions: The results of this study indicate that telavancin remains chemically stable when diluted in the Intermate Infusion System and the Homepump Eclipse elastomeric pumps and stored at 2°C to 8°C for up to 8 days protected from light at the concentration range and dilution schemes evaluated.

Elastomeric Properties of Poly(glycerol sebacate) (PGS) Based Nanoparticle Composites

Science.gov (United States)

Chung, Hyun-Joong; Li, Xinda; Hong, Albert T.-L.

2014-03-01

Owing to the unique combination of biocompatible, biodegradable, and elastomeric properties, poly(glycerol sebacate) and their derivatives are an emerging class of biomaterials for soft tissue replacement, drug delivery, tissue adhesive, and hard tissue regeneration. The mechanical properties of the polyester have been tailored to match a wide range of target organs, ranging from cardiac muscle to bones, by manipulating the process parameters to modulate cross-linking density. In the present study, we applied nanoparticles and cross-linking agents to further optimize their elastomeric properties. Especially, the study aims to enhance the practically important, but less studied, property of tear resistance. Microscopic origin of the property enhancement is discussed.

Cortical bone mineral content in primary hyperparathyroidism

International Nuclear Information System (INIS)

Mautalen, C.; Reyes, H.R.; Ghiringhelli, G.; Fromm, G.

1986-01-01

The bone mineral content (BMC) of 35 patients with primary hyperparathyroidism (PHPT) was measured at the mid radius (95% cortical bone) by photon absorptiometry of a 241 Am source. The majority of the patients had an overt disease of moderate to severe degree. Average serum calcium of the group was 12.3 mg/100 ml (range 10.6 to 18.0 mg/100 ml). The percentage of normality of the BMC was (Av +- 1 SD) 75.1 +- 13.0% for the whole group. The average increment of BMC in 14 patients 9 to 26 months after parathyroidectomy was 9.9%, with a wide dispersion. However, a highly significant negative correlation (r: 0.83; P < 0.01) was found between the initial bone mass and the percentage increment per month after surgery. No furhter gain was observed 2 years after parathyroidectomy except in one patient with an extremely severe bone loss. In spite of the gain obtained after surgery the bone mass remained markedly diminished in most patients showing that the cortical bone loss caused by PHPT is mainly irreversible. (author)

Mineral Content and Biochemical Variables of Aloe vera L. under Salt Stress

Science.gov (United States)

Murillo-Amador, Bernardo; Córdoba-Matson, Miguel Víctor; Villegas-Espinoza, Jorge Arnoldo; Hernández-Montiel, Luis Guillermo; Troyo-Diéguez, Enrique; García-Hernández, José Luis

2014-01-01

Despite the proven economic importance of Aloe vera, studies of saline stress and its effects on the biochemistry and mineral content in tissues of this plant are scarce. The objective of this study was to grow Aloe under NaCl stress of 0, 30, 60, 90 and 120 mM and compare: (1) proline, total protein, and enzyme phosphoenolpyruvate carboxylase (PEP-case) in chlorenchyma and parenchyma tissues, and (2) ion content (Na, K, Ca, Mg, Cl, Fe, P. N, Zn, B, Mn, and Cu) in roots, stems, leaves and sprouts. Proline and PEP-case increased as salinity increased in both parenchyma and chlorenchyma, while total protein increased in parenchyma and decreased in chlorenchyma, although at similar salt concentrations total protein was always higher in chlorenchyma. As salinity increased Na and Cl ions increased in roots, stems, leaves, while K decreased only significantly in sprouts. Salinity increases typically caused mineral content in tissue to decrease, or not change significantly. In roots, as salinity increased Mg decreased, while all other minerals failed to show a specific trend. In stems, the mineral concentrations that changed were Fe and P which increased with salinity while Cu decreased. In leaves, Mg, Mn, N, and B decreased with salinity, while Cu increased. In sprouts, the minerals that decreased with increasing salinity were Mg, Mn, and Cu. Zinc did not exhibit a trend in any of the tissues. The increase in protein, proline and PEP-case activity, as well as the absorption and accumulation of cations under moderate NaCl stress caused osmotic adjustment which kept the plant healthy. These results suggest that Aloe may be a viable crop for soil irrigated with hard water or affected by salinity at least at concentrations used in the present study. PMID:24736276

Mineral content analysis of root canal dentin using laser-induced breakdown spectroscopy

Science.gov (United States)

2018-01-01

Objectives This study aimed to introduce the use of laser-induced breakdown spectroscopy (LIBS) for evaluation of the mineral content of root canal dentin, and to assess whether a correlation exists between LIBS and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) methods by comparing the effects of irrigation solutions on the mineral content change of root canal dentin. Materials and Methods Forty teeth with a single root canal were decoronated and longitudinally sectioned to expose the canals. The root halves were divided into 4 groups (n = 10) according to the solution applied: group NaOCl, 5.25% sodium hypochlorite (NaOCl) for 1 hour; group EDTA, 17% ethylenediaminetetraacetic acid (EDTA) for 2 minutes; group NaOCl+EDTA, 5.25% NaOCl for 1 hour and 17% EDTA for 2 minutes; a control group. Each root half belonging to the same root was evaluated for mineral content with either LIBS or SEM/EDS methods. The data were analyzed statistically. Results In groups NaOCl and NaOCl+EDTA, the calcium (Ca)/phosphorus (P) ratio decreased while the sodium (Na) level increased compared with the other groups (p LIBS and SEM/EDS analyses (r = 0.84, p LIBS method proved to be reliable while providing data for the elemental composition of root canal dentin. PMID:29487841

The content of mineral elements on whole blood and hair in ...

African Journals Online (AJOL)

user

2012-02-14

Feb 14, 2012 ... The mineral content of forage, whole blood and hair samples of Moschus sifanicus were analyzed and ... of the Chinese State Key Protected Wildlife List in 2002. ... of the comparison group match, the result shows that.

Mineral, vitamin C and crude protein contents in kale ( Brassica ...

African Journals Online (AJOL)

This study compares mineral, vitamin C and crude protein contents at different harvesting stages in kale (Brassica oleraceae var. acephala). Three different harvest periods as first harvest stage (at the rosette stage), second harvest stage (at the budding stage) and third harvest stage (at the flowering/blooming stage) were ...

Bone mineral content of the forearm in healthy Dutch women

NARCIS (Netherlands)

Barentsen, R.; Raymakers, J.A.; Landman, J.O.; Duursma, S.A.

1988-01-01

Single energy photon absorptiometry is a reliable technique for assessing the bone mineral content (BMC) of cortical bone in the forearm. It can also be used for BMC measurement in the ultradistal part of the forearm, where there is a considerable proportion of trabecular bone. The results of a BMC

Hybrid magnetorheological fluid–elastomeric lag dampers for helicopter stability augmentation

International Nuclear Information System (INIS)

Hu Wei; Wereley, Norman M

2008-01-01

A laboratory demonstration of a hybrid magnetorheological fluid–elastomeric (MRFE) damper is investigated for adjustable or programmable lag mode damping in helicopters, so that damping requirements can be varied as a function of different flight conditions. The laboratory demonstration of this hybrid MRFE lag damper consists of a double lap shear elastomeric damper in parallel with two magnetorheological (MR) flow mode dampers. This is compared to a damper where only elastomeric materials are implemented, i.e., a double lap shear specimen. The relationship between the output force and the quasi-steady harmonic displacement input to a flow mode MR damper is exploited, where the output force can be adjusted as a function of applied magnetic field. Equivalent viscous damping is used to compare the damping characteristics of the hybrid damper to a conventional elastomeric damper under steady-state sinusoidal displacement excitation. To demonstrate feasibility, a hybrid MRFE damper test setup is designed, and single frequency (lag frequency or rotor in-plane bending frequency) and dual frequency (lag frequency and rotor frequency) tests are conducted under different magnetic fields. The hybrid MRFE damper exhibits amplitude-dependent damping behavior. However, with application of a magnetic field, the damping level is controlled to a specific damping level objective as a function of displacement amplitude. Similarly, under dual frequency conditions, damping degradation at the lag frequency, because of lag motion at the rotor frequency, can also be recovered by increasing magnetic field. A time-domain analysis is developed to study the nonlinear dynamic behavior of the hybrid MRFE damper. Using rate-dependent elasto-slides, the amplitude-dependent behavior of the hybrid MRFE damper is accurately reconstructed using both constant and current-dependent (i.e. controllable) parameters. The analysis is physically motivated and can be applied to the elastomer and MR fluid

Application of short-wave infrared (SWIR) spectroscopy in quantitative estimation of clay mineral contents

International Nuclear Information System (INIS)

You, Jinfeng; Xing, Lixin; Pan, Jun; Meng, Tao; Liang, Liheng

2014-01-01

Clay minerals are significant constituents of soil which are necessary for life. This paper studied three types of clay minerals, kaolinite, illite, and montmorillonite, for they are not only the most common soil forming materials, but also important indicators of soil expansion and shrinkage potential. These clay minerals showed diagnostic absorption bands resulting from vibrations of hydroxyl groups and structural water molecules in the SWIR wavelength region. The short-wave infrared reflectance spectra of the soil was obtained from a Portable Near Infrared Spectrometer (PNIS, spectrum range: 1300∼2500 nm, interval: 2 nm). Due to the simplicity, quickness, and the non-destructiveness analysis, SWIR spectroscopy has been widely used in geological prospecting, chemical engineering and many other fields. The aim of this study was to use multiple linear regression (MLR) and partial least squares (PLS) regression to establish the optimizing quantitative estimation models of the kaolinite, illite and montmorillonite contents from soil reflectance spectra. Here, the soil reflectance spectra mainly refers to the spectral reflectivity of soil (SRS) corresponding to the absorption-band position (AP) of kaolinite, illite, and montmorillonite representative spectra from USGS spectral library, the SRS corresponding to the AP of soil spectral and soil overall spectrum reflectance values. The optimal estimation models of three kinds of clay mineral contents showed that the retrieval accuracy was satisfactory (Kaolinite content: a Root Mean Square Error of Calibration (RMSEC) of 1.671 with a coefficient of determination (R 2 ) of 0.791; Illite content: a RMSEC of 1.126 with a R 2 of 0.616; Montmorillonite content: a RMSEC of 1.814 with a R 2 of 0.707). Thus, the reflectance spectra of soil obtained form PNIS could be used for quantitative estimation of kaolinite, illite and montmorillonite contents in soil

In-use Stability of Ceftaroline Fosamil in Elastomeric Home Infusion Systems and MINI-BAG Plus Containers.

Science.gov (United States)

Bhattacharya, Sisir; Parekh, Satish; Dedhiya, Mahendra

2015-01-01

The objective of this study was to determine in-use stability of ceftaroline fosamil infusion solution of concentrations up to 12 mg/mL in elastomeric home infusion system prefilled with 0.9% Sodium Chloride Injection USP or 5% Dextrose Injection USP and MINI-BAG Plus Container delivery devices prefilled with 0.9% sodium chloride injection. In-use ceftaroline fosamil infusion solution (12 mg/mL) was prepared for elastomeric home infusion systems (Homepump Eclipse, Baxter Intermate, and AccuRx Elastomeric Pump) pre-filled with either 0.9% sodium chloride injection or 5% dextrose; or Baxter MINI-BAG Plus Containers pre-filled with 0.9% Sodium Chloride Injection USP (4 mg/mL to 12 mg/mL ceftaroline fosamil in final solution). The systems were stored refrigerated for 24 hours followed by up to 6 hours of storage at room temperature. Samples were analyzed at various time points for assay and degradation product by a validated stability-indicating high-performance liquid chromatography method. In-use ceftaroline fosamil infusion solution, ranging from 4-mg/mL to a maximum of 12-mg/mL concentration, in elastomeric home infusion systems prefilled with 0.9% sodium chloride injection or 5% dextrose, and MINI-BAG Plus Containers prefilled with 0.9% sodium chloride injection were chemically stable for up to 24 hours refrigerated at 2°C to 8°C (36°F to 46°F) and up to 6 hours at room temperature and had acceptable compatibility with material used. Ceftaroline fosamil (4 mg/mL to 12 mg/mL) maintains its potency for up to 24 hours refrigerated at 2°C to 8°C (36°F to 46°F) and up to 6 hours of storage at room temperature upon reconstitution in infusion solution with 0.9% sodium chloride or 5% dextrose when used in elastomeric home infusion system and MINI-BAG Plus Containers delivery devices prefilled with 0.9% sodium chloride injection.

Comparative study of the chemical composition and mineral element content of Artocarpus heterophyllus and Treculia africana seeds and seed oils.

Science.gov (United States)

Ajayi, Ibironke Adetolu

2008-07-01

A comparative study of Artocarpus heterophyllus and Treculia africana seeds, both of Moraceae family, was carried out to establish their chemical compositions and evaluate their mineral element content in order to investigate the possibility of using them for human and or animal consumption and also to examine if there is a relationship between the properties of these seeds. A. heterophyllus and T. africana are rich in protein; their protein contents are higher than those from high protein animal sources such as beef and marine fishes. Both seeds have high carbohydrate content and could act as source of energy for animals if included in their diets. The oil contents of the seeds are 11.39% and 18.54% for A. heterophyllus and T. africana, respectively. The oils are consistently liquid at room temperature. The results of the physicochemical properties of the two seeds are comparable to those of conventional oil seeds such as groundnut and palm kernel oils and could be useful for nutritional and industrial purposes. The seeds were found to be good sources of mineral elements. The result revealed potassium to be the prevalent mineral elements which are 2470.00 ppm and 1680.00 ppm for A. heterophyllus and T. africana, respectively followed by sodium, magnesium and then calcium. They also contain reasonable quantity of iron, in particular A. heterophyllus 148.50 ppm.

Accuracy of lumbar spine bone mineral content by dual photon absorptiometry

International Nuclear Information System (INIS)

Gotfredsen, A.; Podenphant, J.; Norgaard, H.; Nilas, L.; Nielsen, V.A.; Christiansen, C.

1988-01-01

The accuracy of measurement of the bone mineral content (BMC, g) and bone mineral density (BMD, g/cm 2 ) of the lumbar spine by dual photon absorptiometry (DPA) was estimated by means of two different spine scanners (a Nuclear Data 2100 and a Lunar Radiation DP3). The lumbar spines of 13 cadavers were used. BMC and BMD were measured in situ and on the excised vertebrae in a solution of water/ethanol; and covered with ox muscle/porcine muscle/lard. The actual mineral weight and areal density were determined after chemical maceration, fat extraction, drying to a constant weight, ashing for 24 hr at 600 degrees C, and correction for the transverse processes. The true are was measured by parallax free X rays and planimetry. All measurements of BMC or BMD were highly interrelated (r = 0.94-0.99). The standard error of estimate (s.e.e.) of BMC in situ versus BMC in water/ethanol was 5.2%. The agreement between the BMD values of the two scanners was very good (s.e.e. = 2.9%). BMC in situ predicted the actual vertebral mineral mass with an s.e.e. of 8.1%. BMD in situ and BMD in water/ethanol predicted the actual area density with s.e.e.s of 10.3% and 5.0%, respectively. This study discloses the correlation and accuracy error of spinal DPA measurements in situ in whole cadavers versus the actual BMC and BMD. The error, which is underestimated in in vitro studies, amounts to 10%

Mineral content in French type bread with sodium replacement using ...

African Journals Online (AJOL)

Mineral content in French type bread with sodium replacement using fluorescence spectrometry X-rays by energy dispersive. Thaisa A. Souza Gusmão, Rennan P. De Gusmão, Severina De Sousa, Mário Eduardo R. Moreira Cavalcanti Mata, Maria Elita M Duarte, Rossana Maria F. De Figuereido, Ricardo T Moreira ...

Semen quality, biochemistry and mineral content of five strains of ...

African Journals Online (AJOL)

The study was conducted to evaluate the genetic effect on semen quality, biochemistry and mineral content of three strains of Nigerian indigenous and two exotic cocks. One hundred (100) adult local breeding cocks comprising 20 normal, 20 frizzle and 20 naked necks, 20 dominant black and 20 dominant blue feather were ...

A guide to the suitability of elastomeric seal materials for use in radioactive material transport packages

International Nuclear Information System (INIS)

Vince, D.J.

2004-01-01

Elastomeric seals are a frequently favoured method of sealing Radioactive Material Transport (RMT) packages. The sealing technology has been proven for many years in a wide range of industrial applications. The requirements of the RMT package applications, however, are significantly different from those commonly found in other industries. This guide outlines the Regulatory performance requirements placed on an RMT package sealing system by TS-R-1, and then summarises the material, environment and geometry characteristics of elastomeric seals relevant to RMT applications. Tables in the guide list typical material properties for a range of elastomeric materials commonly used in RMT packages

The role of elastomeric pumps in postoperative analgesia in orthopaedics and factors affecting their flow rate.

Science.gov (United States)

Theodorides, Anthony Andreas

2017-12-01

Elastomeric pumps are mechanical devices composed of an elastomeric balloon reservoir into which the drug to be infused is stored, a protective casing (used by some manufacturers), a flow controller and a wound catheter. In orthopaedics they are used to provide continuous local infiltration analgesia. In this way patients rely less on other routes of analgesia and thus avoid their systemic side effects. Studies have shown good response to analgesia with these pumps for the first 24 hours but their benefit is not as clear at 48 and 72 hours. There are numerous factors that affect the flow rate of elastomeric pumps. Some are inherent to all elastomeric pumps such as: the pressure exerted by the elastomeric balloon, catheter size, the vertical height of the pump in relation to the wound, viscosity and partial filling. There are also other factors which vary according to the manufacturer such as: the optimal temperature to obtain the desired flow rate as this directly affects viscosity, the dialysate that the analgesic drug is mixed with (ie normal saline or 5% dextrose), and the storage conditions of the fluid to be infused. It is thus essential to follow the clinical guidelines provided by the manufacturer in order to obtain the desired flow rate. Copyright the Association for Perioperative Practice.

Quantitative computed tomography for measuring bone mineral content

International Nuclear Information System (INIS)

Felsenberg, D.; Kalender, W.A.; Banzer, D.; Schmilinsky, G.; Heyse, M.; Fischer, E.; Schneider, U.; Siemens A.G., Erlangen; Krankenhaus Zehlendorf, Berlin

1988-01-01

Quantitative computed tomography (QCT) for measuring bone mineral content of lumbar vertebrae is increasingly used internationally. The effect of using conventional CT (single energy CT, SE-CT) and dual energy CT (DE-CT) on reproducibility has been examined. We defined a standard measurement protocol, which automatically evaluates a calibration phantom. This should ensure an in vivo reproducibility of 1 to 2%. Reference data, which has been obtained with this protocol from 113 normal subjects, using SE-CT ad DE-CT, are presented. (orig.) [de

Sugar Profile, Mineral Content, and Rheological and Thermal Properties of an Isomerized Sweet Potato Starch Syrup

OpenAIRE

Dominque, Brunson; Gichuhi, Peter N.; Rangari, Vijay; Bovell-Benjamin, Adelia C.

2013-01-01

Currently, corn is used to produce more than 85% of the world's high fructose syrup (HFS). There is a search for alternative HFS substrates because of increased food demand and shrinking economies, especially in the developing world. The sweet potato is a feasible, alternative raw material. This study isomerized a high glucose sweet potato starch syrup (SPSS) and determined its sugar profile, mineral content, and rheological and thermal properties. Rheological and thermal properties were meas...

Bone mineral content in hyperthyroid patients after combined medical and surgical treatment

International Nuclear Information System (INIS)

Nielsen, H.E.; Mosekilde, L.; Charles, P.

1979-01-01

Bone mineral content (BMC) and bone mineral concentration (BMC') of the forearm were determined by photon absorptiometry in 20 untreated hyperthyroid patients and in 33 patients previously treated for hyperthyroidism. In untreated hyperthyroidism a significant decrease was found in both BMC and BMC'. In treated hyperthyroidism BMC and BMC' were normalized. The findings suggest that a previous hyperthyroid state is not a risk factor for development of spontaneous fractures providing the hyperthyroid state is effectively treated. (Auth.)

Ovariectomy-induced changes in aged beagles: Histomorphometry and mineral content of the rib

Energy Technology Data Exchange (ETDEWEB)

Wilson, A.K.; Bhattacharyya, M.H.; Hurst, D. [Argonne National Lab., IL (United States). Center for Mechanistic Biology and Biotechnology; Miller, S. [Univ. of Utah, Salt Lake City, UT (United States). Radiobiology Div.; Sacco-Gibson, N. [Proctor and Gamble Pharmaceuticals, Cincinnati, OH (United States)

1997-08-01

The effects of ovariectomy on the aged beagle skeleton were studied by histomorphometric analysis of the cortical bone in sequential rib biopsies. Biopsies were taken from each ovariectomized (OV) or sham-operated (SO) dog at the time of surgery and at 1, 4, and 8.5 months after surgery. Tetracycline, calcein, and xylenol orange, respectively, were administered by a fluorochrome labeling procedure (2d-10d-2d) just prior to each postoperative biopsy to provide markers of bone formation. Analysis of sequential biopsies provided a means to follow the response to ovariectomy over time and compare each animal against its own baseline. Examination of sequential biopsies indicated that cortical porosity increased by the fourth month after ovariectomy and remained high at 8.5 months. Ovariectomy did not influence histomorphometric indices at one month after surgery, but substantial differences were observed at later times. Ovariectomy stimulated a transient increase in bone formation and was increased six-fold over that of SO dogs at four months. Ribs were also analyzed for mineral content at necropsy. The rib was heterogeneous along its length for calcium content and concentration. In the midrib where biopsies for histomorphometric analysis were taken, ovariectomy induced a decrease in mass and mineral content; total calcium was decreased by approximately 31%. These data demonstrate that the rib cortical bone is a responsive site for the effects of ovariectomy in female dogs.

Milk-derived proteins and minerals alter serum osteocalcin in prepubertal boys after 7 days

DEFF Research Database (Denmark)

Mark, A.B.; Hoppe, Camilla; Michaelsen, K.F.

2010-01-01

growth depending on the content of milk minerals (calcium and phosphorus). This was a randomized, parallel, double-blind study. Eight-year-old boys (n = 57) received 1 of 4 milk drinks: whey protein with low or high content of minerals, or casein protein with low or high content of minerals. The amount......OC was significantly affected by the treatments (P milk-derived proteins and minerals with regard to sOC (P = .01). The intake of milk drinks containing whey increased sOC at the low content of minerals, whereas it decreased sOC at the high content of minerals (P ...). In contrast, milk drinks containing casein increased sOC both at the low and at the high contents of minerals. In conclusion, whey and casein (corresponding to their content in 1.5 L of milk) differently affect sOC in 8-year-old boys depending on the content of milk minerals, but do not seem to affect other...

Mineral content as a basis for food selection by western lowland gorillas in a forest clearing.

Science.gov (United States)

Magliocca, Florence; Gautier-Hion, Annie

2002-06-01

The forests in northwest Republic of Congo contain a number of herbaceous swamp clearings that provide foraging sites for lowland gorillas (G.g. gorilla). A 10-month study at the Maya Nord clearing (Parc National d'Odzala) showed that feeding activities occupied 72% of the time visiting gorillas spent on the clearing. They fed on four plant species: Enydra fluctuans (Asteraceae), Cyperus sp., Pycreus mundtii, and Rhynchospora corymbosa (Cyperaceae) among the 45 species recorded on the clearing. These clearing food species have higher mineral contents (especially Na and Ca) than the dominant Marantaceae species (Haumania liebrechtsiana) that constituted a staple food plant for gorillas in this forest. They also have higher potassium contents and contain less lignin than non-eaten clearing items/species. Finally, the most actively searched for clearing food (Enydra fluctuans) was characterized by the highest amount of Na and Ca. These results suggest that the mineral content (especially in Na, Ca, and/or K) could determine the feeding selectivity of gorillas at the clearing. They also tend to confirm that the amount of fiber plays a deterrent role in food selectivity, as has been found by many authors. The high density of gorillas in that region could result from the combination of the large areas of Marantaceae forests that provide abundant though monotonous food, and the number of clearings that provide sufficient mineral supplies. Clearings should thus be considered as key habitats for the conservation of gorillas. Copyright 2002 Wiley-Liss, Inc.

Bone mineral content measurement in small infants by single-photon absorptiometry: current methodologic issues

International Nuclear Information System (INIS)

Steichen, J.J.; Asch, P.A.; Tsang, R.C.

1988-01-01

Single-photon absorptiometry (SPA), developed in 1963 and adapted for infants by Steichen et al. in 1976, is an important tool to quantitate bone mineralization in infants. Studies of infants in which SPA was used include studies of fetal bone mineralization and postnatal bone mineralization in very low birth weight infants. The SPA technique has also been used as a research tool to investigate longitudinal bone mineralization and to study the effect of nutrition and disease processes such as rickets or osteopenia of prematurity. At present, it has little direct clinical application for diagnosing bone disease in single patients. The bones most often used to measure bone mineral content (BMC) are the radius, the ulna, and, less often, the humerus. The radius appears to be preferred as a suitable bone to measure BMC in infants. It is easily accessible; anatomic reference points are easily palpated and have a constant relationship to the radial mid-shaft site; soft tissue does not affect either palpation of anatomic reference points or BMC quantitation in vivo. The peripheral location of the radius minimizes body radiation exposure. Trabecular and cortical bone can be measured separately. Extensive background studies exist on radial BMC in small infants. Most important, the radius has a relatively long zone of constant BMC. Finally, SPA for BMC in the radius has a high degree of precision and accuracy. 61 references

Antioxidant Activity, Colour and Mineral Content Of Herbal Tea Prepared From Cosmos Caudatus Leaves at Different Maturity Stages

International Nuclear Information System (INIS)

Dian Nashiela Fatanah; Noriham Abdullah; Nooraain Hashim; Azizah Abd Hamid

2016-01-01

In recent years, increasing consumption of herbal tea is a worldwide trend because of their refreshing taste, positive potential health effect, convenience, abundant resources and also cheaper in price. However, different maturity stages of plants being used as raw material could affect the antioxidant activity, colour and mineral content in herbal tea. Thus, this present study was aimed at determining antioxidant activity, colour and mineral content of herbal tea prepared from Cosmos caudatus (C. caudatus) leaves at three different maturity stages namely young, mature and old. All prepared herbal tea were analysed for total phenolic content (TPC), total flavonoid content (TFC), ferric reducing antioxidant power (FRAP), 2-2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay, colour and mineral content. The results demonstrated that herbal tea prepared from young leaves had strong (p<0.05) antioxidant activity compared to mature and old leaves for all assays tested. Pearsons correlation coefficient also revealed that TPC and TFC exhibited a strong positive correlation with reducing power but negatively correlated with DPPH scavenging activity indicating that these compounds are major contributors to the antioxidant activity. In fact, the darker (p<0.05) colour of C. caudatus herbal tea prepared from young leaves relates to their higher antioxidant activity as compared to mature and old leaves. However, C. caudatus herbal tea prepared from old leaves showed significantly higher in mineral content compared to mature and young leaves. Hence, it can be concluded that, as maturity increased, antioxidant activity and colour in C. caudatus herbal tea decreased and vice-versa for mineral content. (author)

Adequate plasma drug concentrations suggest that amoxicillin can be administered by continuous infusion using elastomeric pumps.

Science.gov (United States)

Arensdorff, Lyne; Boillat-Blanco, Noémie; Decosterd, Laurent; Buclin, Thierry; de Vallière, Serge

2017-09-01

Elastomeric pumps can be useful for the administration of antibiotics in the outpatient setting. To determine amoxicillin degradation in elastomeric pumps, as well as the effectiveness of amoxicillin treatment administered by elastomeric pumps. Antibiotic degradation was measured in elastomeric pumps filled with 6 g of amoxicillin in 240 mL of NaCl 0.9% by drawing samples at 12 h intervals when stored in the fridge for 48 h and when worn around the waist for 24 h. Subsequently nine patients were treated with continuous infusions of 8 or 12 g of amoxicillin per day. Plasma amoxicillin concentrations were measured on each visit to the outpatient parenteral antibiotic therapy unit. Clinical outcome was verified 3 months after the end of treatment. Amoxicillin degradation in elastomeric pumps reached 10% after 48 h in the fridge and an additional 30% when worn around the waist for 24 h. Mean plasma drug concentrations achieved with 12 g of amoxicillin per day were 18.5 mg/L (95% CI 13.5-23.5), which is largely above the MIC of amoxicillin-susceptible bacteria. Nine patients treated for various complicated infections were cured and had no unexpected adverse effects. Adequate plasma drug concentrations and favourable clinical outcomes suggest that amoxicillin can be administered by continuous infusion using elastomeric pumps. This treatment modality does not fulfil formal requirements regarding pharmaceutical stability, but the resulting safety impact in patients is probably limited. Therapeutic drug monitoring and a close clinical follow-up are recommended if this route of administration is chosen. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The enhancing of Au-Ag-Te content in tellurium-bearing ore mineral by bio-oxidation-leaching

Science.gov (United States)

Kim, PyeongMan; Kim, HyunSoo; Myung, EunJi; Kim, YoonJung; Lee, YongBum; Park*, CheonYoung

2015-04-01

The purpose of this study is to enhance the content of valuable metals such as Au-Ag-Te in tellurium-bearing minerals by bio-oxidation-leaching. It was confirmed that pyrite, chalcopyrite, sphalerite and galena were produced together with tellurium-bearing minerals including hessite, sylvanite and tellurobismuthite from ore minerals and concentrates through microscopic observation and SEM/EDS analysis. In a bio-oxidation-leaching experiment, with regard to Au, Ag, Te, Cu and Fe, the changes in the amount of leaching and the content of leaching residues were compared and analyzed with each other depending on the adaptation of an indigenous microbe identified as Acidithiobacillus ferrooxidans. As a result of the experiment, the Au-Ag-Te content in tellurium-bearing ore mineral was enhanced in the order of physical oxidation leaching, physical/non-adaptive bio-oxidation-leaching and physical/adaptive biological leaching. It suggests that the bio-oxidation-leaching using microbes adapted in tellurium-bearing ore mineral can be used as a pre-treatment and a main process in a recovery process of valuable metals. "This research was supported by Basic Science Research Program through the National Research Foundation of Korea(NRF) funded by the Ministry of Education(NRF-2013R1A1A2004898)"

Normal bone mineral content but unfavourable muscle/fat ratio in Klinefelter syndrome

DEFF Research Database (Denmark)

Aksglaede, L.; Mølgaard, Christian; Skakkebaek, N.E.

2008-01-01

OBJECTIVE: To evaluate body composition and bone mineral content (BMC) in children and adolescents with Klinefelter syndrome (KS). DESIGN: Retrospective cross-sectional study. SETTING: Tertiary endocrine clinic at the University Hospital, Copenhagen. PATIENTS: Eighteen untreated boys with KS...

Method for strontium isolation from high-mineralized water

International Nuclear Information System (INIS)

Evzhanov, Kh.; Andriyasova, G.M.

1983-01-01

A method to isolate strontium from high-mineralized waters containing sodium, magnesium, calcium and strontium chlorides, which differ from the prototype method in a considerable decrease in energy consumption with the preservation of a high degree of Sr, Mg and Ca isolation selectivity, has been suggested. According to the method suggested mineralized waters are treated with alkali (NaOH) in the amount of 95-97% of stoichiometry by magnesium, then after separation of magnesium hydroxide precipitate mother liquor is treated with sodium carbonate in the amount of 50-60% of stoichiometry by calcium. After separation of calcium carbonate precipitate mother liquor is treated with NaOH in the amount of 130-135% of stoichiometry by calcium. After separation of calcium hydroxide precipitate from mother liquor by means of sodium carbonate introduction strontium carbonate is isolated. The degree of strontium extraction in the form of SrCO 3 constitutes 90.5% of its content in the initial solution. The method presented can be used for strontium separation from natural and waste waters

Comparing heavy metal contents in crops receiving mineral fertilisers and animal manure

DEFF Research Database (Denmark)

Christensen, Bent Tolstrup; Elsgaard, Lars

2014-01-01

Spring barley (grain, straw), grass-clover (two cuts), winter wheat (grain, straw) and silage maize grown in the Askov long-term experiment with different levels (0, ½, 1, 1½, 2) of mineral fertiliser (NPK) and animal manure (AM) had concentrations of As, Pb, Cd and Hg below the EC maximum permis...... of NPK and AM does not pose a threat in terms of feed quality. However, the long-term accumulation of heavy metals added with mineral fertilisers and animal manure is essentially irreversible and may threaten soil quality....... in the analysed metal contents between crops grown with NPK and AM. Crop contents of uranium and thallium were below the analytical detection limits regardless of nutrient source and addition rate. Thus in a farming context similar to that of the Askov experiment, the long-term application of standard rates...

Evaluation of mineral content and heavy metals of dromedary camel milk in Iran

Directory of Open Access Journals (Sweden)

Mahdieh MOSTAFIDI

Full Text Available Abstract The aim of this study was to determine the amount of major mineral compounds and heavy metals of camel milk in Iran. For this purpose camel milk samples were collected from seven regions of Iran include Qazvin, Golestan, Semnan, Sistan-Baluchestan, Khuzestan, Bushehr and Tehran. The samples were analyzed using Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES method. The results showed that among the mineral contents, iron and zinc of camel milk were greater than bovine milk. Based on the codex standard 193-2007 standards, the maximum acceptable limit for lead and cadmium is 20 µg/kg and 10 µg/kg, respectively. The results of this study showed that the measured amounts of lead, cadmium and nickel in all samples were less than the acceptable limit for bovine milk. Bovine milk and dairy products are a poor source of iron, while the obtained data revealed that camel milk is a major source of minerals, especially iron. The camel milk’s iron was 10 times more than bovine milk. However, variations in mineral content in camel milk could be due to feed, stage of lactation, milk collection time, drought conditions, environmental conditions and associated analytical methods. Camel milk recommended as a valuable source of food for the human.

Effect of hyperthyroidism and its treatment on bone mineral content

International Nuclear Information System (INIS)

Toh, S.H.; Claunch, B.C.; Brown, P.H.

1985-01-01

Patients with hyperthyroidism may develop osteopenia associated with fractures; however, there has been no general agreement on the incidence of osteopenia in hyperthyroidism or the recovery of the mineral loss after treatment of hyperthyroidism. The authors conducted a longitudinal prospective study on the effect of hyperthyroidism and its treatment on bone mineral content (BMC) using photon absorptiometry. They observed that both young and older hyperthyroid patients showed a significantly decreased baseline BMC compared with age- and sex-matched controls. They also observed a slight recovery of BMC in hyperthyroid patients at the two-year interval after a euthyroid state had been achieved. However, the BMC was still much lower than that of controls, and they did not find any significant restoration of BMC following ''cure'' of hyperthyroidism

Biomechanical properties of the femoral neck relative to osteosynthesis methods and bone mineral content assessed by computed tomography

International Nuclear Information System (INIS)

Husby, T.

1990-01-01

Bone mineral content as determined by computerized tomography (CT) and mechanical strength on axial loading were compared in 36 cadaveric femur specimens. Based on the CT measurements of density and area, the mass of a transverse slice of the femur was estimated. Highly significant correlations were demonstrated between strength and cancellous bone density. Even higher correlations were revealed when the bone masses of the proximal and distal femoral areas were calculated. Based on these findings, an equal distribution of the effective mass of the femur was postulated. This hypothesis was confirmed in an experimental rotational model. The CT attenuation values were also correlated to direct measurements of bone mineral content, i.e. calcium. Moreover, the strength of different metal implants, commonly used in femoral neck fractures, were assessed in cadaver specimens. 134 refs., 13 figs., 12 tabs

Comparative analysis of bone mineral contents with dual-energy quantitative computed tomography

International Nuclear Information System (INIS)

Choi, T. J.; Yoon, S. M.; Kim, O. B.; Lee, S. M.; Suh, S. J.

1997-01-01

The Dual-Energy Quantitative Computed Tomography(DEQCT) was compared with bone equivalent K 2 HPO 4 standard solution and ash weight of animal cadaveric trabecular bone in the measurement of bone mineral contents(BMC). The attenuation coefficient of tissues highly depends on the radiation energy, density and effective atomic number of composition. The bone mineral content of DEQCT in this experiments was determined from empirical constants and mass attenuation coefficients of bone, fat and soft tissue equivalent solution in two photon spectra. In this experiments, the BMC of DEQCT with 80 and 120kV p X rays was compared to ash weight of animal trabecular bone. We obtained the mass attenuation coefficient of 0.2409, 0.5608 and 0.2206 in 80kV p , and 0.2046, 0.3273 and 0.1971 cm 2 /g in 120kV p X-ray spectra for water, bone and fat equivalent materials, respectively. The BMC with DEQCT was accomplished with empirical constants K 1 =0.3232, K 2 =0.2450 and mass attenuation coefficients has very closed to ash weight of animal trabecular bone. The BMC of empirical DEQCT and that of manufacturing DEQCT were correlated with ash weight as a correlation r=0.998 and r=0.996, respectively. The BMC of empirical DEQCT using the experimental mass attenuation coefficients and that of manufacture have showed very close to ash weight of animal trabecular bone. (author)

Initial Tensile and Residual Forces of Pigmented Elastomeric Ligatures from Various Brands

Science.gov (United States)

Wichai, Wassana; Anuwongnukroh, Niwat; Dechkunakorn, Surachai; Kaypetch, Rattiporn; Tua-ngam, Peerapong

2017-11-01

This study aimed to investigate the initial tensile and residual forces of pigmented elastomeric ligatures (clear, pink, and metallic) from three commercial brands - Brand 1 (USA), Brand 2 (USA), and Brand 3(China). Twelve elastomeric ligatures of each brand and color were evaluated for initial tensile and residual forces after stretching for 28 days at 37°C by a Universal Testing Machine. The results showed that the highest initial tensile force was 14.78 N, 20.71 N, and 15.1 N for the metallic color of Brand-1, pink color of Brand -2, and metallic color of Brand -3, respectively. There were significant (ptensile force of each brand, except clear and metallic color of Brand-1 & 3 and pink color of Brand-2 & 3. Similarly, among the pigmented ligatures from each brand, significant (ptensile force, except metallic color of Brand-1 & 3. Brand-3 had the highest residual force after 28 days, whereas the loss of force was 80-90% in Brand-1 & 2 and 20-30% in Brand-3. There were also significant (ptensile and residual forces among the three pigmented elastomeric ligatures of the three commercial brands.

Total and regional bone mineral content in healthy Spanish subjects by dual-energy X-ray absorptiometry

International Nuclear Information System (INIS)

Aguado Henche, S.; Rodriguez Torres, R.; Clemente de Arriba, C.; Gomez Pellico, L.

2008-01-01

This is an observational cross-sectional study. The aim of the present study was to describe and analyze patterns of change in total and regional bone mineral content in relation to age and gender in a sedentary Spanish sample population (from the Community of Madrid). The age range of the sample population was from birth to 80 years. One thousand one hundred twenty healthy subjects were recruited and divided into 16 groups according to age. Each subject underwent whole-body densitometry using dual-energy X-ray absorptiometry. An analysis was made of the amount of bone mineral content (BMC) in the whole body and in different regions: the head, trunk, upper limbs, and lower limbs. Gender differences in mean values for upper limbs and lower limbs are statistically significant between 16 and 70 years of age. For the head and trunk, the mean BMC values show the most significant gender differences between 16 and 25 years of age (p≤0.001). Total bone mineral content (TBMC) and TBMC-to-height ratio show significant gender differences between 16 and 70 years of age. In females, TBMC values increase up to 20 years of age and in males up to 25 years of age. We have determined an evolutionary normal pattern of bone mineral content in urban Spanish people. (orig.)

Total and regional bone mineral content in healthy Spanish subjects by dual-energy X-ray absorptiometry

Energy Technology Data Exchange (ETDEWEB)

Aguado Henche, S.; Rodriguez Torres, R.; Clemente de Arriba, C.; Gomez Pellico, L. [Universidad de Alcala, Departamento de Anatomia y Embriologia Humana, Facultad de Medicina, Alcala de Henares, Madrid (Spain)

2008-11-15

This is an observational cross-sectional study. The aim of the present study was to describe and analyze patterns of change in total and regional bone mineral content in relation to age and gender in a sedentary Spanish sample population (from the Community of Madrid). The age range of the sample population was from birth to 80 years. One thousand one hundred twenty healthy subjects were recruited and divided into 16 groups according to age. Each subject underwent whole-body densitometry using dual-energy X-ray absorptiometry. An analysis was made of the amount of bone mineral content (BMC) in the whole body and in different regions: the head, trunk, upper limbs, and lower limbs. Gender differences in mean values for upper limbs and lower limbs are statistically significant between 16 and 70 years of age. For the head and trunk, the mean BMC values show the most significant gender differences between 16 and 25 years of age (p{<=}0.001). Total bone mineral content (TBMC) and TBMC-to-height ratio show significant gender differences between 16 and 70 years of age. In females, TBMC values increase up to 20 years of age and in males up to 25 years of age. We have determined an evolutionary normal pattern of bone mineral content in urban Spanish people. (orig.)

A retrospective analysis of longitudinal changes in bone mineral content in cystic fibrosis.

Science.gov (United States)

Chirita-Emandi, Adela; Shepherd, Sheila; Kyriakou, Andreas; McNeilly, Jane D; Dryden, Carol; Corrigan, Donna; Devenny, Anne; Ahmed, Syed Faisal

2017-08-28

We aimed to describe the longitudinal changes in bone mineral content and influencing factors, in children with cystic fibrosis (CF). One hundred children (50 females) had dual X-ray absorptiometry (DXA) performed. Of these, 48 and 24 children had two to three scans, respectively over 10 years of follow-up. DXA data were expressed as lumbar spine bone mineral content standard deviation score (LSBMCSDS) adjusted for age, gender, ethnicity and bone area. Markers of disease, anthropometry and bone biochemistry were collected retrospectively. Baseline LSBMCSDS was >0.5 SDS in 13% children, between -0.5; 0.5 SDS, in 50% and ≤-0.5 in the remainder. Seventy-eight percent of the children who had baseline LSBMCSDS >-0.5, and 35% of the children with poor baseline (LSBMCSDS0.5), showed decreasing values in subsequent assessments. However, mean LS BMC SDS did not show a significant decline in subsequent assessments (-0.51; -0.64; -0.56; p=0.178). Lower forced expiratory volume in 1 s percent (FEV1%) low body mass index standard deviation scores (BMI SDS) and vitamin D were associated with reduction in BMC. Bone mineral content as assessed by DXA is sub-optimal and decreases with time in most children with CF and this study has highlighted parameters that can be addressed to improve bone health.

Evaluation of Acid Digestion Procedures to Estimate Mineral Contents in Materials from Animal Trials

Directory of Open Access Journals (Sweden)

M. N. N. Palma

2015-11-01

Full Text Available Rigorously standardized laboratory protocols are essential for meaningful comparison of data from multiple sites. Considering that interactions of minerals with organic matrices may vary depending on the material nature, there could be peculiar demands for each material with respect to digestion procedure. Acid digestion procedures were evaluated using different nitric to perchloric acid ratios and one- or two-step digestion to estimate the concentration of calcium, phosphorus, magnesium, and zinc in samples of carcass, bone, excreta, concentrate, forage, and feces. Six procedures were evaluated: ratio of nitric to perchloric acid at 2:1, 3:1, and 4:1 v/v in a one- or two-step digestion. There were no direct or interaction effects (p>0.01 of nitric to perchloric acid ratio or number of digestion steps on magnesium and zinc contents. Calcium and phosphorus contents presented a significant (p0.01 calcium or phosphorus contents in carcass, excreta, concentrate, forage, and feces. Number of digestion steps did not affect mineral content (p>0.01. Estimated concentration of calcium, phosphorus, magnesium, and zinc in carcass, excreta, concentrated, forage, and feces samples can be performed using digestion solution of nitric to perchloric acid 4:1 v/v in a one-step digestion. However, samples of bones demand a stronger digestion solution to analyze the mineral contents, which is represented by an increased proportion of perchloric acid, being recommended a digestion solution of nitric to perchloric acid 2:1 v/v in a one-step digestion.

A measurement instrument for bone mineral content of adult and children

International Nuclear Information System (INIS)

Liu Shaofang

1996-01-01

The γ radiation source was used in bone mineral content measurement analysis of adult and children and a new instrument is developed successfully. It's precision is +2%. The advantage of this instrument is light, cheap and reliable. It can be used widely in medical science and clinic for diagnosis on certain diseases and research work

Proximate composition, minerals and vitamins content of selected vegetables grown in Peshawar

International Nuclear Information System (INIS)

Bangash, J.A.; Arif, M.; Khan, M.A.; Khan, F.; Amin-ur-Rrahma; Hussain, I.

2011-01-01

Ten vegetables namely Pot purslane, Spinach, Turnip, Garlic, Mustard (Sarson), Radish, Bitter gourd, Lady finger, Bath sponge and Brinjal were analyzed for their proximate composition, vitamin and mineral contents to evaluate their importance in human nutrition. The results showed that almost all vegetables contain appreciable amount of essential nutrients. The maximum content of moisture, carbohydrate, crude protein, crude fat, crude fiber, and ash recorded in these vegetables was (92.50 %, 26.88 %, 5.0%, 0.40%, 1.4% and 1.9%), respectively, with a minimum content (66.80 %, 3.91 %, 0.7%, 0.08%, 0.4% and 0.38%), respectively. Maximum concentration of macro minerals K, Ca, Mg, and Na, observed was (400, 210, 109, and 55) mg/100 g, respectively, with a minimum concentration (26, 15, 17, and 10) mg/100 g, respectively. Maximum concentration of micro minerals Fe, Cu, Zn, Mn and Cr observed was (29, 0.33, 3.05, 1.70, and 0.36) mg/100 g with a minimum concentration (2, 0.05, 0.43, 0.21, and 0.06) mg/100 g, respectively. Maximum concentration of water soluble vitamins i.e. thiamine, riboflavin, niacin and ascorbic acid recorded was (0.280, 0.190, 0.69, and 65) mg/100 g with a minimum concentration (0.011, 0.015, 0.23, and 4.00) mg/100 g, respectively. From this study it can be concluded that consumption of vegetables in different combinations could provide a reasonable daily recommended amount of essential nutrients for the maintenance of healthy life and normal body functioning. (author)

Is static friction affected by aging and amount of elastomeric ligatures in orthodontic sliding mechanics? An in-vitro investigation.

Science.gov (United States)

Lo Giudice, A; Portelli, M; Militi, A; Spinuzza, P; Bellocchio, A M; Nucera, R; Marcolina, M; Ghilardi, G; Manuelli, M; Lucchese, A

2018-03-15

In straight-wire mechanics, friction can significantly influence the forces expressed by wires. The aim of this study is to assess whether the aging and the sum of elastomeric ligatures affect the static friction during orthodontic space closure. A 0.017x 0.025-in SS was drawn throughout a 3-bracket experimental model and engaged with elastomeric ligatures. Before performing the test, the ligatures were soaked in artificial saliva for 48 hours (Group 1), 2 weeks (Group 2) and 4 weeks (Group 3); brand-new ligatures were also tested as control group (Group 4). The resistance to sliding (RS) was recorded at 3 different numerical configurations of ligatures using a customized testing machine and tests were repeated for ten times. Data of RS were statistically analysed by using two way analysis of variance (ANOVA) and Tukey’s multiple comparison tests. RS was found to increase systematically when more elastomeric ligatures were included in the wire engaging system. At two weeks of immersion in artificial saliva elastomeric ligatures showed the lowest values of RS while they became significantly more frictional after immersion for 4 weeks. The results of this study showed that in multi-bracket orthodontic therapy, the RS increases with the number of elastomeric ligatures involved for arch-wire engagement. Differently from the frictional behavior of elastomeric modules, the aging of these ligatures does not influence their incremental effect of frictional forces.

Short communication: Variations in major mineral contents of Mediterranean buffalo milk and application of Fourier-transform infrared spectroscopy for their prediction.

Science.gov (United States)

Stocco, G; Cipolat-Gotet, C; Bonfatti, V; Schiavon, S; Bittante, G; Cecchinato, A

2016-11-01

The aims of this study were (1) to assess variability in the major mineral components of buffalo milk, (2) to estimate the effect of certain environmental sources of variation on the major minerals during lactation, and (3) to investigate the possibility of using Fourier-transform infrared (FTIR) spectroscopy as an indirect, noninvasive tool for routine prediction of the mineral content of buffalo milk. A total of 173 buffaloes reared in 5 herds were sampled once during the morning milking. Milk samples were analyzed for Ca, P, K, and Mg contents within 3h of sample collection using inductively coupled plasma optical emission spectrometry. A Milkoscan FT2 (Foss, Hillerød, Denmark) was used to acquire milk spectra over the spectral range from 5,000 to 900 wavenumber/cm. Prediction models were built using a partial least square approach, and cross-validation was used to assess the prediction accuracy of FTIR. Prediction models were validated using a 4-fold random cross-validation, thus dividing the calibration-test set in 4 folds, using one of them to check the results (prediction models) and the remaining 3 to develop the calibration models. Buffalo milk minerals averaged 162, 117, 86, and 14.4mg/dL of milk for Ca, P, K, and Mg, respectively. Herd and days in milk were the most important sources of variation in the traits investigated. Parity slightly affected only Ca content. Coefficients of determination of cross-validation between the FTIR-predicted and the measured values were 0.71, 0.70, and 0.72 for Ca, Mg, and P, respectively, whereas prediction accuracy was lower for K (0.55). Our findings reveal FTIR to be an unsuitable tool when milk mineral content needs to be predicted with high accuracy. Predictions may play a role as indicator traits in selective breeding (if the additive genetic correlation between FTIR predictions and measures of milk minerals is high enough) or in monitoring the milk of buffalo populations for dairy industry purposes. Copyright �

Error analysis of the microradiographical determination of mineral content in mineralised tissue slices

International Nuclear Information System (INIS)

Jong, E. de J. de; Bosch, J.J. ten

1985-01-01

The microradiographic method, used to measure the mineral content in slices of mineralised tissues as a function of position, is analysed. The total error in the measured mineral content is split into systematic errors per microradiogram and random noise errors. These errors are measured quantitatively. Predominant contributions to systematic errors appear to be x-ray beam inhomogeneity, the determination of the step wedge thickness and stray light in the densitometer microscope, while noise errors are under the influence of the choice of film, the value of the optical film transmission of the microradiographic image and the area of the densitometer window. Optimisation criteria are given. The authors used these criteria, together with the requirement that the method be fast and easy to build an optimised microradiographic system. (author)

International Longitudinal Paediatric Reference Standards for Bone Mineral Content

Science.gov (United States)

Baxter-Jones, Adam DG; McKay, Heather; Burrows, Melonie; Bachrach, Laura K; Lloyd, Tom; Petit, Moira; Macdonald, Heather; Mirwald, Robert L; Bailey, Don

2014-01-01

To render a diagnosis pediatricians rely upon reference standards for bone mineral density or bone mineral content, which are based on cross-sectional data from a relatively small sample of children. These standards are unable to adequately represent growth in a diverse pediatric population. Thus, the goal of this study was to develop sex and site specific standards for BMC using longitudinal data collected from four international sites in Canada and the United States. Data from four studies were combined; Saskatchewan Paediatric Bone Mineral Accrual Study (n=251), UBC Healthy Bones Study (n=382); Penn State Young Women’s Health Study (n=112) and Stanford’s Bone Mineral Accretion study (n=423). Males and females (8 to 25 years) were measured for whole body (WB), total proximal femur (PF), femoral neck (FN) and lumbar spine (LS) BMC (g). Data were analyzed using random effects models. Bland-Altman was used to investigate agreement in predicted and actual data. Age, height, weight and ethnicity independently predicted BMC accrual across sites (P accrual; Hispanic 75.4 (28.2) g less BMC accrual; Blacks 82.8 (26.3) g more BMC accrual with confounders of age, height and weight controlled. Similar findings were found for PF and FN. Female models for all sites were similar with age, height and weight all independent significant predictors of BMC accrual (P accounting for age, size, sex and ethnicity. In conclusion, when interpreting BMC in paediatrics we recommend standards that are sex, age, size and ethnic specific. PMID:19854308

International longitudinal pediatric reference standards for bone mineral content.

Science.gov (United States)

Baxter-Jones, Adam D G; Burrows, Melonie; Bachrach, Laura K; Lloyd, Tom; Petit, Moira; Macdonald, Heather; Mirwald, Robert L; Bailey, Don; McKay, Heather

2010-01-01

To render a diagnosis pediatricians rely upon reference standards for bone mineral density or bone mineral content, which are based on cross-sectional data from a relatively small sample of children. These standards are unable to adequately represent growth in a diverse pediatric population. Thus, the goal of this study was to develop sex and site-specific standards for BMC using longitudinal data collected from four international sites in Canada and the United States. Data from four studies were combined; Saskatchewan Paediatric Bone Mineral Accrual Study (n=251), UBC Healthy Bones Study (n=382); Penn State Young Women's Health Study (n=112) and Stanford's Bone Mineral Accretion study (n=423). Males and females (8 to 25 years) were measured for whole body (WB), total proximal femur (PF), femoral neck (FN) and lumbar spine (LS) BMC (g). Data were analyzed using random effects models. Bland-Altman was used to investigate agreement between predicted and actual data. Age, height, weight and ethnicity independently predicted BMC accrual across sites (Paccrual; Hispanic 75.4 (28.2) g less BMC accrual; Blacks 82.8 (26.3) g more BMC accrual with confounders of age, height and weight controlled. We report similar findings for the PF and FN. Models for females for all sites were similar with age, height and weight as independent significant predictors of BMC accrual (Paccounting for age, size, sex and ethnicity. In conclusion, when interpreting BMC in pediatrics we recommend standards that are sex, age, size and ethnic specific. Copyright (c) 2009 Elsevier Inc. All rights reserved.

Effects of atmospheric pressure conditions on flow rate of an elastomeric infusion pump.

Science.gov (United States)

Wang, Jong; Moeller, Anna; Ding, Yuanpang Samuel

2012-04-01

The effects of pressure conditions, both hyperbaric and hypobaric, on the flow rate of an elastomeric infusion pump were investigated. The altered pressure conditions were tested with the restrictor outlet at two different conditions: (1) at the same pressure condition as the Infusor elastomeric balloon and (2) with the outlet exposed to ambient conditions. Five different pressure conditions were tested. These included ambient pressure (98-101 kilopascals [kPa]) and test pressures controlled to be 10 or 20 kPa below or 75 or 150 kPa above the ambient pressure. A theoretical calculation based on the principles of fluid mechanics was also used to predict the pump's flow rate at various ambient conditions. The conditions in which the Infusor elastomeric pump and restrictor outlet were at the same pressure gave rise to average flow rates within the ±10% tolerance of the calculated target flow rate of 11 mL/hr. The flow rate of the Infusor pump decreased when the pressure conditions changed from hypobaric to ambient. The flow rate increased when the pressure conditions changed from hyperbaric to ambient. The flow rate of the Infusor elastomeric pump was not affected when the balloon reservoir and restrictor outlet were at the same pressure. The flow rate varied from 58.54% to 377.04% of the labeled flow rate when the pressure applied to the reservoir varied from 20 kPa below to 150 kPa above the pressure applied to the restrictor outlet, respectively. The maximum difference between observed flow rates and those calculated by applying fluid mechanics was 4.9%.

Response of nutrients, minerals, antioxidant leaf pigments, vitamins, polyphenol, flavonoid and antioxidant activity in selected vegetable amaranth under four soil water content.

Science.gov (United States)

Sarker, Umakanta; Oba, Shinya

2018-06-30

Four selected vegetable amaranths were grown under four soil water content to evaluate their response in nutrients, minerals, antioxidant leaf pigments, vitamins, polyphenol, flavonoid and total antioxidant activity (TAC). Vegetable amaranth was significantly affected by variety, soil water content and variety × soil water content interactions for all the traits studied. Increase in water stress, resulted in significant changes in proximate compositions, minerals (macro and micro), leaf pigments, vitamin, total polyphenol content (TPC), and total flavonoid content (TFC) of vegetable amaranth. Accessions VA14 and VA16 performed better for all the traits studied. Correlation study revealed a strong antioxidant scavenging activity of leaf pigments, ascorbic acid, TPC and TFC. Vegetable amaranth can tolerate soil water stress without compromising the high quality of the final product in terms of nutrients and antioxidant profiles. Therefore, it could be a promising alternative crop in semi-arid and dry areas and also during dry seasons. Copyright © 2018. Published by Elsevier Ltd.

Physico-chemical properties, antioxidant activity and mineral contents of pineapple genotypes grown in china.

Science.gov (United States)

Lu, Xin-Hua; Sun, De-Quan; Wu, Qing-Song; Liu, Sheng-Hui; Sun, Guang-Ming

2014-06-23

The fruit physico-chemical properties, antioxidant activity and mineral contents of 26 pineapple [Ananas comosus (L.) Merr.] genotypes grown in China were measured. The results showed great quantitative differences in the composition of these pineapple genotypes. Sucrose was the dominant sugar in all 26 genotypes, while citric acid was the principal organic acid. Potassium, calcium and magnesium were the major mineral constituents. The ascorbic acid (AsA) content ranged from 5.08 to 33.57 mg/100 g fresh weight (FW), while the total phenolic (TP) content varied from 31.48 to 77.55 mg gallic acid equivalents (GAE)/100 g FW. The two parameters in the predominant cultivars Comte de Paris and Smooth Cayenne were relative low. However, MD-2 indicated the highest AsA and TP contents (33.57 mg/100 g and 77.55 mg GAE/100 g FM, respectively), and it also showed the strongest antioxidant capacity 22.85 and 17.30 μmol TE/g FW using DPPH and TEAC methods, respectively. The antioxidant capacity of pineapple was correlated with the contents of phenolics, flavonoids and AsA. The present study provided important information for the further application of those pineapple genotypes.

Effect of Commonly Used Beverage, Soft Drink, and Mouthwash on Force Delivered by Elastomeric Chain: A Comparative In Vitro Study

OpenAIRE

Kumar, Kiran; Shetty, Sharath; Krithika, M J; Cyriac, Bobby

2014-01-01

Background: The objective was to evaluate and compare the effect of Coca-Cola®, tea, Listerine® mouthwash on the force delivered by elastomeric chain in vitro. Materials and Methods: Four specimen groups (distilled water, Coca-Cola®, tea, Listerine® mouthwash) with a total sample size of 480 specimens. A specimen is described as a four link grey close elastomeric chain. Jigs, each with a series of pins set 25 mm apart, was used to hold stretched elastomeric chains at a...

ANTIOXIDANT CAPACITY, MINERAL CONTENT AND ESSENTIAL OIL COMPOSITION FROM SELECT ALGERIAN MEDICINAL PLANTS

Directory of Open Access Journals (Sweden)

Hadjira Guenane1

2017-10-01

Full Text Available The objective of the present study was to analyze the total antioxidant capacity, minerals contents of four plants (Juniperus oxycedrus, Thymus capitatus, Laurus nobilis and Eruca vesicaria and chemical composition of the essential oils of the aerial parts of T. capitatus. Their antioxidant activity was assessed by DPPH, ABTS and FRAPS assays. Total phenol and flavonoid contents of the extracts were also determined. The results showed that the L. nobilis extract had the highest total phenolic and flavonoids contents (19.11 ± 0.22 mg GAE•g-1 dw, 4.47 ± 0.12 mg QE•g-1 dw, respectively. The extract of E. vesicaria had the highest value of TEAC for scavenging DPPH, whereas L. nobilis extract was active for ABTS and FRAP. GC/MS analysis revealed that the essential oil from the aerial parts of T. capitatus contained thirty-seven compounds; thymol was the major constituent (82.79 %. Atomic absorption spectroscopy showed high levels of Ca, K, Mg and Fe, and trace amounts of Zn, Cu and Mn in all four extracts.

Mechanically programmed shape change in laminated elastomeric composites.

Science.gov (United States)

Robertson, Jaimee M; Torbati, Amir H; Rodriguez, Erika D; Mao, Yiqi; Baker, Richard M; Qi, H Jerry; Mather, Patrick T

2015-07-28

Soft, anisotropic materials, such as myocardium in the heart and the extracellular matrix surrounding cells, are commonly found in nature. This anisotropy leads to specialized responses and is imperative to material functionality, yet few soft materials exhibiting similar anisotropy have been developed. Our group introduced an anisotropic shape memory elastomeric composite (A-SMEC) composed of non-woven, aligned polymer fibers embedded in an elastomeric matrix. The composite exhibited shape memory (SM) behavior with significant anisotropy in room-temperature shape fixing. Here, we exploit this anisotropy by bonding together laminates with oblique anisotropy such that tensile deformation at room temperature - mechanical programming - results in coiling. This response is a breakthrough in mechanical programming, since non-affine shape change is achieved by simply stretching the layered A-SMECs at room temperature. We will show that pitch and curvature of curled geometries depend on fiber orientations and the degree of strain programmed into the material. To validate experimental results, a model was developed that captures the viscoplastic response of A-SMECs. Theoretical results correlated well with experimental data, supporting our conclusions and ensuring attainability of predictable curling geometries. We envision these smart, soft, shape changing materials will have aerospace and medical applications.

No Evidence for Differential Biomass and Mineral Content in Adult Plants Grown from Dimorphic Suaeda Aralocaspica Seeds

International Nuclear Information System (INIS)

Wang, L.; Wang, H. L.; Tian, C. Y.; Huang, Z. Y.

2016-01-01

The production of two or more seed types by a single plant is known as seed heteromorphism. There have been many comparisons of seed traits or growth between plants grown from heteromorphic seeds. However, information is scarce regarding the mineral contents of adult plants from heteromorphic seeds. We herein present biomass and mineral profiles of adult plants grown from dimorphic seeds (non-dormant brown seeds and black seeds with non-deep physiological dormancy) of the annual desert halophyte Suaeda aralocaspica at different nutrient and salinity levels. Although nutrient and salinity treatments affected dry weight and mineral content, there were no significant differences among S. aralocaspica seed-dimorphic plants under the same experimental conditions. This study is one of the few to compare the physiological responses between seed-heteromorphic plants, and reveals that mineral status corresponds with growth performance in these plants. (author)

[Effects of nandrolone decanoate on bone mineral content and intestinal absorption of calcium].

Science.gov (United States)

Nuti, R; Righi, G A; Turchetti, V; Vattimo, A

1984-01-28

To evaluate the effects of a long-term treatment with nandrolone decanoate on metabolism of the skeleton, a double-blind randomized study was carried out in women with joint diseases without metabolic bone derangement. Ten patients were treated with 50 mg of nandrolone decanoate every three weeks for two years; in six subjects a treatment with placebo was performed. As it concerns plasma calcium and phosphate, serum alkaline phosphatase, urinary excretion of calcium, phosphate, hydroxyproline and cAMP, as parathyroid index, it was not observed significant differences in the two examined groups. While in placebo group at the end of the study the intestinal radiocalcium remained unchanged and bone mineral content showed a slight decrease, on the contrary nandrolone decanoate treatment promoted a significant improvement in intestinal calcium absorption and an increase in bone mineral content.

Physical and Chemical Stability of Urapidil in 0.9% Sodium Chloride in Elastomeric Infusion Pump.

Science.gov (United States)

Tomasello, Cristina; Leggieri, Anna; Rabbia, Franco; Veglio, Franco; Baietto, Lorena; Fulcheri, Chiara; De Nicolò, Amedeo; De Perri, Giovanni; D'Avolio, Antonio

2016-01-01

Urapidil is an antihypertensive agent, usually administered through intravenous bolus injection, slow-intravenous infusion, or continuous-drug infusion by perfusor. Since to date no evidences are available on drug stability in elastomeric pumps, patients have to be hospitalized. The purpose of this study was to validate an ultra-performance liquid chromatographic method to evaluate urapidil stability in an elastomeric infusion pump, in order to allow continuous infusion as home-care treatment. Analyses were conducted by diluting urapidil in an elastomeric pump. Two concentrations were evaluated: 1.6 mg/mL and 3.3 mg/mL. For the analyses, a reverse-phase ultra-performance liquid chromatographic- photodiode array detection instrument was used. Stressed degradation, pH changes, and visual clarity were used as stability indicators up to 10 days after urapidil solution preparation. The drug showed no more than 5% degradation during the test period at room temperature. No pH changes and no evidences of incompatibility were observed. Stress tests resulted in appreciable observation of degradation products. Considering the observed mean values, urapidil hydrochloride in sodium chloride 0.9% in elastomeric infusion pumps is stable for at least 10 days. These results indicate that this treatment could be administered at home for a prolonged duration (at least 7 days) with a satisfactory response. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

Sixteen-week analysis of unaltered elastomeric chain relating in-vitro force degradation with in-vivo extraction space tooth movement.

Science.gov (United States)

Evans, Kristin S; Wood, Cory M; Moffitt, Allen H; Colgan, John A; Holman, J Kevin; Marshall, Steven D; Pope, D Spencer; Sample, Lew B; Sherman, Stephen L; Sinclair, Peter M; Trulove, Tim S

2017-04-01

The purposes of this study were to evaluate whether unaltered elastomeric chain can continue to move teeth for 16 weeks and to relate it to the amount of force remaining for the same batch of elastomeric chains. The in-vivo portion of the study had a sample of 30 paired extraction space sites from 22 subjects who were measured for closure of the space every 28 days. The altered side elastomeric chain served as the control and was replaced at 28-day intervals whereas the experimental side remained unaltered. In the in-vitro portion of the study, 100 each of 2-unit and 3-unit segments of the same batch of elastomeric chains were placed in a water bath, and the force was measured for 20 of each segment length at the 28-day measurement points. Statistically significant amounts of space closure occurred at both the altered and unaltered sites at all measurement time points. The mean space closure at the altered sites was minimally greater than that observed at the paired unaltered sites. The mean differences of space closure between the altered and unaltered sites ranged from a minimum of -0.05 mm at 4 weeks to a maximum of -0.14 mm at 8 weeks. The elastomeric chain force degraded rapidly by 4 weeks but continued a gradual diminution of force to 86 g at 16 weeks. Unaltered elastomeric chain continued to move teeth into extraction spaces for 16 weeks in this sample from both statistically and clinically significant standpoints. There were minimal and statistically insignificant differences in the mean space closure measurements between the paired altered and unaltered sites. The elastomeric chain force at 16 weeks was less than 100 g, yet at the same time point, teeth continued to move clinically. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Lack of transgene and glyphosate effects on yield, and mineral and amino acid content of glyphosate-resistant soybean.

Science.gov (United States)

Duke, Stephen O; Rimando, Agnes M; Reddy, Krishna N; Cizdziel, James V; Bellaloui, Nacer; Shaw, David R; Williams, Martin M; Maul, Jude E

2018-05-01

There has been controversy as to whether the glyphosate resistance gene and/or glyphosate applied to glyphosate-resistant (GR) soybean affect the content of cationic minerals (especially Mg, Mn and Fe), yield and amino acid content of GR soybean. A two-year field study (2013 and 2014) examined these questions at sites in Mississippi, USA. There were no effects of glyphosate, the GR transgene or field crop history (for a field with both no history of glyphosate use versus one with a long history of glyphosate use) on grain yield. Furthermore, these factors had no consistent effects on measured mineral (Al, As, Ba, Cd, Ca, Co, Cr, Cs, Cu, Fe, Ga, K, Li, Mg, Mn, Ni, Pb, Rb, Se, Sr, Tl, U, V, Zn) content of leaves or harvested seed. Effects on minerals were small and inconsistent between years, treatments and mineral, and appeared to be random false positives. No notable effects on free or protein amino acids of the seed were measured, although glyphosate and its degradation product, aminomethylphosphonic acid (AMPA), were found in the seed in concentrations consistent with previous studies. Neither glyphosate nor the GR transgene affect the content of the minerals measured in leaves and seed, harvested seed amino acid composition, or yield of GR soybean. Furthermore, soils with a legacy of GR crops have no effects on these parameters in soybean. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Friction produced by types of elastomeric ligatures in treatment mechanics with the preadjusted appliance.

Science.gov (United States)

Baccetti, Tiziano; Franchi, Lorenzo

2006-03-01

The objective was to compare the frictional forces generated by new nonconventional passive elastomeric ligatures (NCL) and conventional elastomeric ligatures (CL) under dry conditions. An experimental model reproducing the right buccal segment of the upper arch and consisting of five stainless steel 0.022-inch preadjusted brackets (from the second premolar through the central incisor) was used to assess both static and kinetic frictional forces produced by NCL and CL. The frictional forces generated by the 0.019 x 0.025-inch stainless steel wire with the two types of elastomeric ligatures were recorded by sliding the wire into the aligned brackets. The friction produced by the 0.014-inch superelastic nickel titanium wire was evaluated both in the presence of aligned brackets and of three-mm misaligned canine bracket. The amount of both static and kinetic frictions were minimal (<10 g) in the NCL group in the presence of aligned brackets with both types of wires, whereas it ranged from a minimum of 95.6 g for the 0.014-inch superelastic nickel titanium wire to a maximum of 590.7 g for the 0.019 x 0.025-inch stainless steel wire when using CL. The amount of both static and kinetic frictions in the presence of a misaligned canine bracket in the NCL group were less than half of that shown by the CL group. A recently developed passive ligature system is able to produce significantly lower levels of frictional forces in vitro when compared with conventional elastomeric modules.

Limestone doses affecting mineral contents in tropical grass forage

International Nuclear Information System (INIS)

Armelin, M.J.A.; Saiki, M.

2005-01-01

Field trial was performed at the experimental farm of Southeast Embrapa Cattle, Sao Carlos - SP, Brazil, on a 16 year old Brachiaria decumbens pasture, grown on a distrophic Hapludox (Oxisol), recovered by the use of limestone and fertilizer. The experiments were carried out in random blocks, with 6 replications and 5 treatments. The 100 m 2 blocks were established in the pasture. Each block received a sequence of limestone doses of 0, 1, 2, 4 and 8 t/ha. The forage samples were taken one year after limestone application on soil surface. Instrumental neutron activation analysis (INAA) followed by gamma-ray spectrometry was the analytical method used to determine mineral contents. The statistical analysis showed a negative linear correlation of Br, Co, Cr, Mn and Zn contents in forage with the limestone doses, while the uptake of Mg was affected in a positive way. (author)

OPAQUE MINERAL CONTENT OF DUTLUCA VOLCANICS (BURHANİYE - BALIKESİR: THE EFFECT OF HYDROTHERMAL ALTERATION ON THESE MINERALS

Directory of Open Access Journals (Sweden)

Şükrü KOÇ

2016-12-01

Full Text Available Dutluca volcanics, which are known as Hallaçlar Formation in regional scale in the study area (Kurshens- ky, 1976, are composed of hydrothermally altered andesite and basaltic andesite. In these rocks, sulfidic minerals such as pyrite, enargite and chalcosine, and oxide and hydroxide minerals such as magnetite, hematite and goethite were detected as opaque minerals. The presence of enargite in opaque mineral para- genesis, and the changes observed in structures and textures of opaque and silicate minerals indicate that examined volcanics have been altered by highly sulfidic hydrothermal solutions. During the hydrothermal alteration process, which indicates at least in two phases, a diffuse pyritization rich in H S in reducing conditions and enargite mineral, which is known as pathfinder minerals in such processes, formed in the first phase. Later on; the extensive martitization developed in oxidizing conditions.

Diagenetic and other highly mineralized waters in the Polish Carpathians

International Nuclear Information System (INIS)

Zuber, Andrzej; Chowaniec, Jozef

2009-01-01

Highly mineralized waters of different chemical types and origin occur in the flysch formations and their bedrocks in the western part of the Polish Carpathians. The marine sedimentation water of the flysch formations is not preserved, as the most mineralized and the heaviest isotopic values of flysch waters are characterized by δ 18 O and δ 2 H values in the ranges of 5-7 per mille and -(20-30) per mille , respectively. Their origin is related to the dehydration of clay minerals during burial diagenesis, with molecules of marine water completely removed by molecules of released bound water. They are relatively enriched in Na + in respect to the marine water, supposedly due to the release of Na + during the illitization of smectites and preferable incorporation of other cations from the primary brine into newly formed minerals. In some parts of younger formations, i.e. in the Badenian sediments, brines occur with isotopic composition close to SMOW and Cl - contents greatly exceeding the typical marine value of about 19.6 g/L, supposedly due to ultrafiltration. Most probably, the marine water of the flysch formations was similarly enriched chemically in its initial burial stages. Final Cl - contents in diagenetic waters depend on different Cl - contents in the primary brines and on relationships between diagenetic and further ultrafiltration processes. In some areas, diagenetic waters migrate to the surface along fault zones and mix with young local meteoric waters becoming diluted, with the isotope composition scattering along typical mixing lines. In areas with independent CO 2 flow from great depths, they form chloride CO 2 -rich waters. Common CO 2 -rich waters are formed in areas without near-surface occurrences of diagenetic waters. They change from the HCO 3 -Ca type for modern waters to HCO 3 -Mg-Ca, HCO 3 -Na-Ca and other types with elevated TDS, Mg 2+ and/or Na - contents for old waters reaching even those of glacial age. Bedrocks of the flysch are

Heat shrink ability of electron-beam-modified thermoplastic elastomeric films from blends of ethylene-vinylacetate copolymer and polyethylene

International Nuclear Information System (INIS)

Chattopadhyay, S.; Chaki, T.K.; Bhowmick, Anil K.

2000-01-01

The heat shrink ability of electron-beam-irradiated thermoplastic elastomeric films from blends of ethylene-vinylacetate copolymer (EVA) and low-density polyethylene (LDPE) has been investigated in this paper. The effects of temperature, time and extent of stretching and shrinkage temperature and time have been reported. Based on the above data, the optimized conditions in terms of high heat shrinkage and low amnesia rating have been evaluated. Influence of radiation doses (0-500 kGy), multifunctional sensitizer levels (ditri methylol propane tetraacrylate, DTMPTA), and blend proportions on heat shrink ability has been explained with the help of gel fraction and X-ray data. With the increase in radiation dose, gel fraction increases, which in turn gives rise to low values of heat shrinkage and amnesia rating. At a constant radiation dose and blend ratio, percent heat shrinkage is found to decrease with increase in DTMPTA level. Gel content increases with the increase in EVA content of the blend at a constant radiation dose and monomer level, giving rise to decrease in heat shrink ability. Heat shrinkage increases with the increase in percent crystallinity, although the amnesia rating follows the reverse trend.

Heat shrink ability of electron-beam-modified thermoplastic elastomeric films from blends of ethylene-vinylacetate copolymer and polyethylene

Energy Technology Data Exchange (ETDEWEB)

Chattopadhyay, S.; Chaki, T.K.; Bhowmick, Anil K. E-mail: anilkb@rtc.iitkgp.ernet.in

2000-11-01

The heat shrink ability of electron-beam-irradiated thermoplastic elastomeric films from blends of ethylene-vinylacetate copolymer (EVA) and low-density polyethylene (LDPE) has been investigated in this paper. The effects of temperature, time and extent of stretching and shrinkage temperature and time have been reported. Based on the above data, the optimized conditions in terms of high heat shrinkage and low amnesia rating have been evaluated. Influence of radiation doses (0-500 kGy), multifunctional sensitizer levels (ditri methylol propane tetraacrylate, DTMPTA), and blend proportions on heat shrink ability has been explained with the help of gel fraction and X-ray data. With the increase in radiation dose, gel fraction increases, which in turn gives rise to low values of heat shrinkage and amnesia rating. At a constant radiation dose and blend ratio, percent heat shrinkage is found to decrease with increase in DTMPTA level. Gel content increases with the increase in EVA content of the blend at a constant radiation dose and monomer level, giving rise to decrease in heat shrink ability. Heat shrinkage increases with the increase in percent crystallinity, although the amnesia rating follows the reverse trend.

An objective algorithm for the determination of bone mineral content using dichromatic absorptiometry

International Nuclear Information System (INIS)

Appledorn, C.R.; Witt, R.M.; Wellman, H.N.; Johnston, C.C.

1985-01-01

The determination of vertebral column bone mineral content by dual photon absorptiometric methods is a problem of continued clinical interest. The more successful methods suffer from the frequent need of operator interaction in order to maintain good precision results. The authors have introduced a new objective algorithm that eliminates the subjectiveness of operator interaction without sacrificing reproducibility. The authors' system consists of a modified rectilinear scanner interfaced to a CAMAC acquisition device coupled to a PDP-11V03 minicomputer. The subject is scanned in the supine position with legs elevated to minimize lordosis. The source (Gd-153) and detector are collimated defining an area of 10mm x 10mm at the level of the spine. The transverse scan width is usually 120 mm. Scanning from the iliac crests toward the head, 50 transverses at 3mm y-increments are acquired at approximately 1mm increments. The data analysis begins with the calculation of R-value for each pixel in the scan. The calculations for bone mineral content are performed and various quantities are accumulated. In a reproducibility study of 116 patient studies, the authors achieved a bone mineral/bone area ratio precision (std dev/mean) of 1.37% without operator interaction nor vertebral body selection

Role of Production Area, Seasonality and Age of Fermented Camel (Camelus Dromedarius Milk Gariss on Mineral Contents

Directory of Open Access Journals (Sweden)

Adam Ismail Ahmed

2016-12-01

Full Text Available The objective of this work was to study the differences between some minerals content of gariss samples collected from two different production areas in two different production systems (i.e. traditional system Kordofan area and semi-intensive system- which, the camels are kept in an open barn and graze around the farm. The lactating female camels are supplemented with concentrates in addition to good quality ration containing groundnut cake and Sorghum biocolor and water supply upon required in Kordofan and Khartoum provinces in Sudan at the different seasons (summer, autumn and winter and their gariss samples were collected. Sodium, potassium, calcium, magnesium and phosphorus of gariss samples collected in autumn season (Kordofan area, summer season (Khartoum area, and winter season (Khartoum and Kordofan areas were determined, after that the age of gariss was noted from farmers directly when the samples were collected. Four different ages of gariss which registered were (5-8 hrs, 12 hrs, 48 hrs and more than 48 hrs. Each fermentation time (age of gariss was used for analyzing mineral contents. The results showed that gariss prepared from different production locations and in different seasons in Kordofan and Khartoum production areas were statistically different in most of the mineral contents determined. To conclude, different feeding sources or different physiological status may affect camels’ milk and consequently their gariss product, also different age of gariss had affects the mineral content of milk.

Puncture mechanics of soft elastomeric membrane with large deformation by rigid cylindrical indenter

Science.gov (United States)

Liu, Junjie; Chen, Zhe; Liang, Xueya; Huang, Xiaoqiang; Mao, Guoyong; Hong, Wei; Yu, Honghui; Qu, Shaoxing

2018-03-01

Soft elastomeric membrane structures are widely used and commonly found in engineering and biological applications. Puncture is one of the primary failure modes of soft elastomeric membrane at large deformation when indented by rigid objects. In order to investigate the puncture failure mechanism of soft elastomeric membrane with large deformation, we study the deformation and puncture failure of silicone rubber membrane that results from the continuous axisymmetric indentation by cylindrical steel indenters experimentally and analytically. In the experiment, effects of indenter size and the friction between the indenter and the membrane on the deformation and puncture failure of the membrane are investigated. In the analytical study, a model within the framework of nonlinear field theory is developed to describe the large local deformation around the punctured area, as well as to predict the puncture failure of the membrane. The deformed membrane is divided into three parts and the friction contact between the membrane and indenter is modeled by Coulomb friction law. The first invariant of the right Cauchy-Green deformation tensor I1 is adopted to predict the puncture failure of the membrane. The experimental and analytical results agree well. This work provides a guideline in designing reliable soft devices featured with membrane structures, which are present in a wide variety of applications.

Thermochemistry: the key to minerals separation from biomass for fuel use in high performance systems

Energy Technology Data Exchange (ETDEWEB)

Overend, R P [National Renewable Energy Laboratory, Golden, CO (United States)

1997-12-31

Biomass use in high efficiency thermal electricity generation is limited not by the properties of the organic component of biomass, but by the behavior of the associated mineral matter at high temperatures. On a moisture and ash free basis biomass, which has an average formula of CH{sub 1.4}O{sub 0.6}N{sub 0.1}, has a relatively low heating value of 18.6 GJ/t. However, this would not limit its use in high efficiency combustion systems because adequate high temperatures could be reached to achieve high carnot cycle efficiencies. These high temperatures cannot be reached because of the fouling and slagging propensities of the minerals in biomass. The mineral composition is a function of soils and the growth habit of the biomass, however, the most important element is potassium, which either alone or in combinating with silica forms the basis of fouling and slagging behaviors. Growing plants selectively concentrate potassium in their cells, which along with nitrogen and phosphorus are the key macronutrients for plant growth. Annual plants tend to have very high potassium contents, although wood biomass exclusive of the living cambial layer (i.e. minus the bark, small branches, and leaves) has minimal potassium content and other nutrients. Under combustion conditions the potassium is mobilized, especially in the presence of chlorine, at relative low temperatures and fouls heat transfer surfaces and corrodes high performance metals used, for example, in the high temperature sections of burners and gas turbines. Recent work has demonstrated the phenomenology of ash fouling, mainly by the potassium component of biomass, as well as identifying the key species such as KOH, KCl, and sulphates that are involved in potassium transport at temperatures <800 deg C. Techniques that separate the mineral matter from the fuel components (carbon and hydrogen) at low temperatures reduce or limit the alkali metal transport phenomena and result in very high efficiency combustion

Thermochemistry: the key to minerals separation from biomass for fuel use in high performance systems

Energy Technology Data Exchange (ETDEWEB)

Overend, R.P. [National Renewable Energy Laboratory, Golden, CO (United States)

1996-12-31

Biomass use in high efficiency thermal electricity generation is limited not by the properties of the organic component of biomass, but by the behavior of the associated mineral matter at high temperatures. On a moisture and ash free basis biomass, which has an average formula of CH{sub 1.4}O{sub 0.6}N{sub 0.1}, has a relatively low heating value of 18.6 GJ/t. However, this would not limit its use in high efficiency combustion systems because adequate high temperatures could be reached to achieve high carnot cycle efficiencies. These high temperatures cannot be reached because of the fouling and slagging propensities of the minerals in biomass. The mineral composition is a function of soils and the growth habit of the biomass, however, the most important element is potassium, which either alone or in combinating with silica forms the basis of fouling and slagging behaviors. Growing plants selectively concentrate potassium in their cells, which along with nitrogen and phosphorus are the key macronutrients for plant growth. Annual plants tend to have very high potassium contents, although wood biomass exclusive of the living cambial layer (i.e. minus the bark, small branches, and leaves) has minimal potassium content and other nutrients. Under combustion conditions the potassium is mobilized, especially in the presence of chlorine, at relative low temperatures and fouls heat transfer surfaces and corrodes high performance metals used, for example, in the high temperature sections of burners and gas turbines. Recent work has demonstrated the phenomenology of ash fouling, mainly by the potassium component of biomass, as well as identifying the key species such as KOH, KCl, and sulphates that are involved in potassium transport at temperatures <800 deg C. Techniques that separate the mineral matter from the fuel components (carbon and hydrogen) at low temperatures reduce or limit the alkali metal transport phenomena and result in very high efficiency combustion

High-dose dosimetry using natural silicate minerals

International Nuclear Information System (INIS)

Carmo, Lucas S. do; Mendes, Leticia; Watanabe, Shigueo; Rao, Gundu; Lucas, Natasha; Sato, Karina; Barbosa, Renata F.

2015-01-01

In the present study, certain natural silicate minerals such as aquamarine (AB), morganite (PB), goshenite (WB), white jadeite (JW), green jadeite (JG), pink tourmaline (PT) and two varieties of jadeite-like quartz, denoted here by JQ1 and JQ2, were investigated using the thermoluminescence technique to evaluate their potential for use as very-high- and high-dose dosimeters. These minerals respond to high doses of γ-rays of up to 1000 kGy and often to very high doses of up to 3000 kGy. The TL response of these minerals may be considered to be satisfactory for applications in high-dose dosimetry. Investigations of electron paramagnetic resonance and optically stimulated luminescence dosimetry are in progress. (author)

High-dose dosimetry using natural silicate minerals

Energy Technology Data Exchange (ETDEWEB)

Carmo, Lucas S. do; Mendes, Leticia, E-mail: isatiro@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Watanabe, Shigueo; Rao, Gundu; Lucas, Natasha; Sato, Karina, E-mail: lacifid@if.usp.br [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Instituto de Fisica. Departamento de Fisica Nuclear; Barbosa, Renata F., E-mail: profcelta@hotmail.com [Universidade Federal de Sao Paulo (UNIFESP), Santos, SP (Brazil). Departamento de Ciencias do Mar

2015-07-01

In the present study, certain natural silicate minerals such as aquamarine (AB), morganite (PB), goshenite (WB), white jadeite (JW), green jadeite (JG), pink tourmaline (PT) and two varieties of jadeite-like quartz, denoted here by JQ1 and JQ2, were investigated using the thermoluminescence technique to evaluate their potential for use as very-high- and high-dose dosimeters. These minerals respond to high doses of γ-rays of up to 1000 kGy and often to very high doses of up to 3000 kGy. The TL response of these minerals may be considered to be satisfactory for applications in high-dose dosimetry. Investigations of electron paramagnetic resonance and optically stimulated luminescence dosimetry are in progress. (author)

Forces released during alignment with a preadjusted appliance with different types of elastomeric ligatures.

Science.gov (United States)

Franchi, Lorenzo; Baccetti, Tiziano

2006-05-01

The purpose of this in-vitro study was to compare the forces generated by new nonconventional elastomeric ligatures (NCEL) and conventional elastomeric ligatures (CEL) during leveling and aligning phases. The testing model consisted of 5 stainless steel 0.022-in preadjusted brackets for second premolar, first premolar, canine, lateral incisor, and central incisor. The canine bracket was welded to a sliding bar that allowed for different vertical positions. The forces generated by 3 sizes of wires (0.012-, 0.014-, and 0.016-in superelastic nickel-titanium) with the 2 types of elastomeric ligatures at different amounts of upward canine misalignment (1.5, 3, 4.5, and 6 mm) were recorded. Significant differences between CEL and NCEL were found for all tested variables (P <.01) with the exception of the 0.014- and 0.016-in wires at canine misalignment of 1.5 mm. A noticeable amount of force was generated with the NCEL at all 4 canine positions with all 3 wire sizes (from about 50 to about 150 g). With 4.5 mm of canine misalignment or more, the average amount of released force with the CEL was approximately zero.

Investigation of the recycling of tires to elastomeric requirements by techniques of thermal compression

Science.gov (United States)

Nadal Gisbert, Antonio V.

In this work is investigated the recycling of tires to elastomeric requirements by thermal compression. The production of recycled products is carried out starting from the powder, of elastomeric nature, coming from the grinding of used tires denominated GTR (Ground Tire Rubber) of different grain size, although the fundamental objective is the recycling of powder of 0,2mm grain size. The process of forming used for obtaining the recycled product is thermal compression, due to its simplicity and low cost. The composition of the powder has been analyzed and also the influence, on the elastomeric characteristics of the recycled product, of different parameters: Grain size, compact pressure, temperature, time, thickness of the recycled product and combination of sizes. At last we give an hypothesis that justifies the mechanism that gives cohesion to the powder GTR and allows their recycling. We also have carried out an analysis of the investigation lines, at the present, on the recycling of tires in general and an economic study of the viability of the recycled product in front of present products in the market, agglomerated with polyurethane, that have their application in using it in different types of floors.

Molecular modeling of the elastomeric properties of repeating units and building blocks of resilin, a disordered elastic protein.

Science.gov (United States)

Khandaker, Md Shahriar K; Dudek, Daniel M; Beers, Eric P; Dillard, David A; Bevan, David R

2016-08-01

The mechanisms responsible for the properties of disordered elastomeric proteins are not well known. To better understand the relationship between elastomeric behavior and amino acid sequence, we investigated resilin, a disordered rubber-like protein, found in specialized regions of the cuticle of insects. Resilin of Drosophila melanogaster contains Gly-rich repetitive motifs comprised of the amino acids, PSSSYGAPGGGNGGR, which confer elastic properties to resilin. The repetitive motifs of insect resilin can be divided into smaller partially conserved building blocks: PSS, SYGAP, GGGN and GGR. Using molecular dynamics (MD) simulations, we studied the relative roles of SYGAP, and its less common variants SYSAP and TYGAP, on the elastomeric properties of resilin. Results showed that SYGAP adopts a bent structure that is one-half to one-third the end-to-end length of the other motifs having an equal number of amino acids but containing SYSAP or TYGAP substituted for SYGAP. The bent structure of SYGAP forms due to conformational freedom of glycine, and hydrogen bonding within the motif apparently plays a role in maintaining this conformation. These structural features of SYGAP result in higher extensibility compared to other motifs, which may contribute to elastic properties at the macroscopic level. Overall, the results are consistent with a role for the SYGAP building block in the elastomeric properties of these disordered proteins. What we learned from simulating the repetitive motifs of resilin may be applicable to the biology and mechanics of other elastomeric biomaterials, and may provide us the deeper understanding of their unique properties. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Content of mineral elements in the diet of students of physical education faculty].

Science.gov (United States)

Novokshanova, A L; Nikitiyk, D B; Pozdniakov, A L

2013-01-01

Research of the diet of students of the Faculty of Physical Education found discrepancy of caloric content and correlation of macro- and micronutrients to physiological norms accompanied by a deficiency of some mineral elements. Thus, this research found discrepancy of a diet in caloric content and correlation of macro- and micronutrients to physiological norms. Calorie deficiency in both groups is caused for lack of all macro- and micronutrients, but mostly for lack of carbohydrates with an average glycemic index, fruit, and vegetables that have prebiotic properties and mineral-rich elements. Deficiency in the diet of young men 9.6% of the total protein and 23.5% of carbohydrates was accompanied for lack 15.5% of calcium. In the group of girls the results showed a decrease of the required amounts of calcium, magnesium and iron of 36.4; 7.5 and 1.5% respectively, which was displayed against a background of reducing the consumption of the total protein 25.1 and 36.0% of carbohydrates. As a result, basic nutrition of students practicing sports requires rationalization and adjustment. To improve the biological value of the diet it is advisable for students to use daily dairy products and other sources of animal protein in their diets. It is also necessary to introduce fruit and vegetables as a source of dietary fibers and mineral elements. Created in both groups deficiency of calcium and biologically high-grade proteins of animal origin can be eliminated by various dairy products in which calcium and phosphorus are in easily digestible form and in a balanced quantity. Despite the considerable amount of calcium in many foods (meat, bread, cereals, vegetables) calcium is assimilated with difficulty from these products. The exception is the calcium of milk, curd, cheese and other dairy products. The ration between calcium and phosphorus in milk is 1:1-1.4:1. For example, taking 0.5 liters of milk provides 600 mg of assimilable calcium intake.

Effect of liming and fertilizer on mineral content and productivity of Brachiaria Decumbens grass forage

International Nuclear Information System (INIS)

Armelin, M.J.A.; Saiki, M.

2007-01-01

To restore a degraded pasture of Brachiaria decumbens, located in Sao Carlos - SP, southeastern Brazil, under altitude tropical climate, an experiment was carried out to study the effects of limestone, buried or not buried in the soil, and fertilizer use on mineral content and forage yield, after 3 years of treatment. Limestone and phosphorus were applied once, one month before starting. NK were applied after each cutting, for fertilized plots, four to five times a year. Experimental design was a random block (100 m 2 ), with 6 replications and 4 treatments. Each block received 4 t/ha of limestone, except the control. Forage samples were collected 14 cm above soil surface. Instrumental neutron activation analysis (INAA) followed by gamma-ray spectrometry was the analytical method used to determine the mineral contents. Dry matter yield was affected positively with liming when compared with the limestone control, but the effect of limestone use was more pronounced with the concomitant use of NK fertilizer. The contents of Ca, Cs, Fe, La, Mg, Rb, Sc, Sm and Th in forage were negatively affected with the NK use, perhaps due to a dilution effect, while a reverse were observed for K, Cl, perhaps due to input of KCl, besides Br, Mn and Se. It seems that limestone is not a key input to restore degraded tropical pastureland, grown on acid soils, when nitrogen is lacking. INAA allowed the monitoring of some not routine elements that may be under observation to avoid potential plant nutritional disorders in production systems with high limestone and fertilizer use. (author)

The carbon isotope ratios and contents of mineral elements in leaves of Chinese medicinal plants

International Nuclear Information System (INIS)

Lin Zhifang; Sun Guchou; Wang Wei

1989-01-01

Leaf carbon isotope ratios and 13 kinds of mineral elements were measured on 36 species of common Chinese medicinal plants in a subtropical monsoon forest of Ding Hu Shan in Guangdong Province. The .delta.13C value were from -26.4 to -32.6%, indicating that all of the species belonged the photosynthetic C3 types. The relative lower value of δ13C was observed in the life form of shrubs. The contents of 7 elements (N, P, K, Ca, Na Mg, Si) were dependent upon the species, life form, medicinal function and medicinal part. Herb type medicine and the used medicinal part of leaves or whole plant showed higher levels of above elements than the others. Among the nine groups with different medicinal functions, it was found that more nitrogen was in the leaves of medicinal plants for hemophthisis, hypertension and stomachic troubles, more phosphorus and potassium were in the leaves for cancer and snake bite medicines, but more calcium and magnesium were in the leaves for curing rheumatics. Ferric, aluminium and manganese were the main composition of microelements in leaves. There were higher content of ferric in leaves for hemophthisis medicine, higher zinc in leaves for cold and hypertension medicine, and higher Cup in leaves of stomachic medicine. It was suggested that the pattern of mineral elements in leaves of Chinese medicinal plants reflected the different properties of absorption and accumulation. Some additional effect due to the high content of certain element might be associated with the main function of that medicine

An Evaluation of the Effect of Various Gloves on Polymerization Inhibition of Elastomeric Impression Materials: An In vitro Study.

Science.gov (United States)

Hiremath, Vinuta; Vinayakumar, G; Ragher, Mallikarjuna; Rayannavar, Sounyala; Bembalagi, Mahantesh; Ashwini, B L

2017-11-01

Latex protective barriers such as gloves and rubber dam material have been used widely in restorative procedures for crown and bridge. However, the chemical used during latex glove fabrication is thought to inhibit the polymerization of elastomeric impression materials used for impression making which has a detrimental effect on the dimensional accuracy and surface definition of resultant casts used for restorative procedures. The objectives of the study were to examine the surface of different elastomeric impressions on contact with various gloves. This clinical study included a total of eighty specimens of two types of the putty elastomeric impression material were hand manipulated by wearing three different gloves materials and is placed on a marked area of a clean and alcohol-treated glass slab at room temperature. The specimens examined for any signs of polymerization inhibition. The specimen will be rated as being "inhibited" if any residue remains on the glass slab and absence of the above will result as "no inhibition." The results showed no interference with the polymerization inhibition of the selected elastomers followed by the nitrile glove. The latex gloves showed inhibited set of the elastomeric impression material but set after sometime confirming time-dependent inhibition of the impression material. This study shows that the use of latex and sometime nitrile gloves during crown and bridge procedures should be contraindicated and the use of vinyl gloves should be stressed when working with elastomeric impression materials.

POTENTIAL USE OF ORGANIC MINERAL AS MINERAL SOURCE FOR DIET OF JUVENILE VANNAMEI SHRIMP, Penaeus vannamei

Directory of Open Access Journals (Sweden)

Asda Laining

2015-06-01

Full Text Available The use of organic mineral (OM has been recently introduced in aquaculture both as feed supplement and water quality improvement. A feeding experiment was conducted to evaluate a response dose of OM on growth, survival, and mineral content in whole the body and carapace of vannamei shrimp (Penaeus vannamei. Three diets were supplemented with different levels of organic mineral at 1 (OM1, 2 (OM2 and 4 (OM4 g/100 g diet. Positive control was a diet without OM inclusion but supplemented with commercial mineral mixture at level of 4 g/100 g diet. Juvenile vannamei shrimp with average initial body weight of 3.5±0.1 g were stocked into 12 tanks with a capacity of 200 L. After 75 days feeding trial, highly significant weight gains was observed in shrimp fed OM at all levels compared to the positive control. However, no significant differences were found among dietary OM groups. The growth response was clearly shown by the same values of SGRs in the three OM supplemented groups (1.1%/d and only differed significantly from positive control. Increasing of dietary OM significantly improved survival rate of shrimp where the highest was observed in group fed OM1 and the lowest was in control diet. Effect of dietary OM on whole body Ca and P were quite similar while whole body Ca and P content of OM1 group was slightly high and tended to decrease in two groups with higher level dietary OM. However, no significant differences among the treatment groups. A clear response of supplementing OM in diet was detected on whole body Zn content. Increase of dietary OM resulted in an increase of Zn content in whole body. The effect was clearly shown when diet contained 2% and 4% OM. Carapace Ca content was highly significant when diet contained 2% OM. Similar to whole body Zn content, there was also a linear trend of response dose of dietary OM on carapace Zn content which the highest was found in dietary OM4. Based on growth, survival rate, and Zn content

Hydrogen isotope permeation in elastomeric materials

International Nuclear Information System (INIS)

Steinmeyer, R.H.; Braun, J.D.

1976-01-01

The permeabilities of elastomeric and polymeric materials to hydrogen isotopes were measured at room temperature. The technique for measuring permeation rates is based on the following constant-volume method: a fixed pressure of gas is applied to one side of the specimen to be studied and the permeability constant is determined from the observed rate of pressure increase in an initially evacuated volume on the other side of the specimen. Permeability constants for hydrogen, deuterium, and tritium were measured for Mylar, Teflon, Kapton, Saran, Buna-N, and latex rubber. Results were compared with literature values for hydrogen and deuterium where available and showed excellent agreement

Trace uranium determination in beverages and mineral water using fission track techniques

International Nuclear Information System (INIS)

Cheng, Y.L.; Lin, J.Y.; Hao, X.H.

1993-01-01

The uranium contents of beverages and mineral water have been estimated using the technique of fission track analysis with polycarbonate detector. The U contents in beverages have been found to vary from 0.26 ± 0.03 to 1.65 ± 0.07 ppb, the average value is 0.93 ± 0.05 ppb. The mean U content in mineral water is 9.20 ± 0.16 ppb, which is ∼ 10 times higher than the mean U content of beverages. The present study shows the high U content in mineral water, indicating need for further investigation of U content in mineral water for the studies of radiation health hazards. (Author)

Dual-photon absorptiometry: A new method of determining bone mineral content. Pt. 1

International Nuclear Information System (INIS)

Buttermann, G.; Eiber, J.; Hennig, J.; Pabst, H.W.

1988-01-01

Cortical (neck of femur) and trabecular (L 2-4) bone mass has been determined repeatedly with DPA using 153 Gd (NOVO Lab 22 a) in 545 females and 112 males with no evidence of bone diseases. Measured 'normal' (age- and sex-related average) values for bone mineral content (BMC) differed significantly (p [de

Does Cu supplementation affect the mechanical and structural properties and mineral content of red deer antler bone tissue?

Science.gov (United States)

Gambín, P; Serrano, M P; Gallego, L; García, A; Cappelli, J; Ceacero, F; Landete-Castillejos, T

2017-08-01

The main factors affecting the mechanical (and other) properties of bone, including antler, are the proportions of ash (especially Ca and P) and collagen content. However, some trace minerals may also play more important roles than would be expected, given their low levels in bone and antler. One such trace mineral is Cu. Here, we studied the effects of Cu supplementation on the mechanical and structural characteristics, and mineral content of antlers from yearling and adult (4 years of age) red deer fed a balanced diet. Deer (n=35) of different ages (21 yearlings and 14 adults) were studied. A total of 18 stags (11 yearlings and 7 adults) were injected with Cu (0.83 mg Cu/kg BW) every 42 days, whereas the remaining 17 (10 yearlings and 7 adults) were injected with physiological saline solution (control group). The Cu content of serum was analysed at the beginning of the trial and 84 days after the first injection to assess whether the injected Cu was mobilized in blood. Also, the mechanical and structural properties of antlers and the mineral content in their cortical walls were examined at three (yearlings) or four (adults) points along the antler beam. The effect of Cu supplementation was different in yearlings and adults. In yearlings, supplementation increased the Cu content of serum by 28%, but did not affect antler properties. However, in adults, Cu supplementation increased the Cu content of serum by 38% and tended to increase the cortical thickness of antlers (P=0.06). Therefore, we conclude that, even in animals receiving balanced diets, supplementation with Cu could increase antler cortical thickness in adult deer, although not in yearlings. This may improve the trophy value of antlers, as well as having potential implications for bones in elderly humans, should Cu supplementation have similar effects on bones as those observed in antlers.

METHOD FOR PROVIDING SHAPED BIODEGRADABLE AND ELASTOMERIC STRUCTURES OF (CO) POLYMERS OF 1,3-TRIMETHYLENE CARBONATE (TMC), SHAPED BIODEGRADABLE AND ELASTOMERIC STRUCTURES, AND THE USE OF THESE STRUCTURES

NARCIS (Netherlands)

Grijpma, D.W.; Pêgo, A.P.; Feijen, Jan

2004-01-01

The present invention relates to methods for providing shaped biodegradable and elastomeric structures of (co)polymers of 1,3­trimethylene carbonate (TMC) with improved (mechanical) properties which can be used for tissue or tissue component support, generation or regeneration. Such shaped

Phenolic Profiles, Phytchemicals and Mineral Content of Decoction and Infusion of Opuntia ficus-indica Flowers.

Science.gov (United States)

Ammar, Imene; Ennouri, Monia; Bouaziz, Mohamed; Ben Amira, Amal; Attia, Hamadi

2015-12-01

Opuntia flowers are a natural source of biologically active compounds and they have been used as medicinal plant for a long time. Despite the various uses reported for the decoction and infusion of these flowers, their characterization has been discarded. In this study, the decoction and infusion prepared from Opuntia ficus-indica were analyzed with respect to their content in minerals and phytochemicals in order to evaluate its nutritional characteristics. The obtained data proved that these preparations are a rich source of minerals mainly K and Ca. Moreover, the phytochemical analysis revealed that they have important polyphenols, flavonoids and tannins contents with the infusion that presented the highest polyphenol levels. LC-MS analyses of decoction and infusion allowed the characterization of 20 phenolic compounds. It is mainly identified by the presence of flavonols glycosides.

Radiostratigraphy and heavy mineral content of the Weches Formation (Eocene), Nacogdoches County, Texas

International Nuclear Information System (INIS)

Jobe, K.; Ledger, E.B.; Sharp, P.; Crocker, M.C.

1993-01-01

The Weches Formation of eastern Texas is a mudstone containing green sand-size clay aggregates. A vertical sequence of 43 samples was analyzed along an excavated cliff to determine radionuclide content. Samples average 5 ppm uranium and range from 2 to about 7 ppm. Thorium averages 20 ppm and ranges from 13 to almost 36 ppm. the gamma-ray spectrometer employed exhibits a certainty of about ±10% (one standard deviation) at the levels measured. Heavy mineral studies of mudstones are few, so one sample of the Weches mudstone was selected for heavy mineral separation and point counting of grain mounts. A total of 2606 grains were counted giving mineral percentages of zircon (28.8%), garnet (17.9%), tourmaline (10.5%), titanite (8.7%), apatite (7.6%), staurolite (6.4%), green hornblende (5.2%), epidote (5.1%), sillimanite (2.8%), monatite (2.2%), kyanite (1.9%), basaltic hornblende (1.5%), and biotite (1.3%). In addition, actinolite, spinel, rutile, and collophane were observed but not counted. Previous studies found a similar heavy mineral suite in the underlying Queen City Formation, but in different proportions. Differences in heavy mineral percentages probably reflect different water-flow regimes at the time of deposition. Heavy minerals in the Weches and Queen City formations are from the same general source area Measured radionuclide ratios are similar to granitic ratios and suggest that detrital heavy minerals, particularly zircon and monazite, are the main site of uranium and thorium and their decay products in the Weches Formation

Diagenetic and other highly mineralized waters in the Polish Carpathians

Energy Technology Data Exchange (ETDEWEB)

Zuber, Andrzej, E-mail: andrzej.zuber@pgi.gov.pl [Polish Geological Institute, Carpathian Branch, PL-31560 Krakow, ul. Skrzatow 1 (Poland); Chowaniec, Jozef [Polish Geological Institute, Carpathian Branch, PL-31560 Krakow, ul. Skrzatow 1 (Poland)

2009-10-15

Highly mineralized waters of different chemical types and origin occur in the flysch formations and their bedrocks in the western part of the Polish Carpathians. The marine sedimentation water of the flysch formations is not preserved, as the most mineralized and the heaviest isotopic values of flysch waters are characterized by {delta}{sup 18}O and {delta}{sup 2}H values in the ranges of 5-7 per mille and -(20-30) per mille , respectively. Their origin is related to the dehydration of clay minerals during burial diagenesis, with molecules of marine water completely removed by molecules of released bound water. They are relatively enriched in Na{sup +} in respect to the marine water, supposedly due to the release of Na{sup +} during the illitization of smectites and preferable incorporation of other cations from the primary brine into newly formed minerals. In some parts of younger formations, i.e. in the Badenian sediments, brines occur with isotopic composition close to SMOW and Cl{sup -} contents greatly exceeding the typical marine value of about 19.6 g/L, supposedly due to ultrafiltration. Most probably, the marine water of the flysch formations was similarly enriched chemically in its initial burial stages. Final Cl{sup -} contents in diagenetic waters depend on different Cl{sup -} contents in the primary brines and on relationships between diagenetic and further ultrafiltration processes. In some areas, diagenetic waters migrate to the surface along fault zones and mix with young local meteoric waters becoming diluted, with the isotope composition scattering along typical mixing lines. In areas with independent CO{sub 2} flow from great depths, they form chloride CO{sub 2}-rich waters. Common CO{sub 2}-rich waters are formed in areas without near-surface occurrences of diagenetic waters. They change from the HCO{sub 3}-Ca type for modern waters to HCO{sub 3}-Mg-Ca, HCO{sub 3}-Na-Ca and other types with elevated TDS, Mg{sup 2+} and/or Na{sup -} contents for

Elastomeric polymer resonant waveguide grating based pressure sensor

International Nuclear Information System (INIS)

Song, Fuchuan; Xie, Antonio Jou; Seo, Sang-Woo

2014-01-01

In this paper, we demonstrate an elastomeric polymer resonant waveguide grating structure to be used as a pressure sensor. The applied pressure is measured by optical resonance spectrum peak shift. The sensitivity—as high as 86.74 pm psi −1 or 12.58 pm kPa −1 —has been experimentally obtained from a fabricated sensor. Potentially, the sensitivity of the demonstrated sensor can be tuned to different pressure ranges by the choices of elastic properties and layer thicknesses of the waveguide and cladding layers. The simulation results agree well with experimental results and indicate that the dominant effect on the sensor is the change of grating period when external pressure is applied. Based on the two-dimensional planar structure, the demonstrated sensor can be used to measure applied surface pressure optically, which has potential applications for optical ultrasound imaging and pressure wave detection/mapping

Spectral Assessment of Soil Properties: Standoff Quantification of Soil Organic Matter Content in Surface Mineral Soils and Alaskan Peat

Science.gov (United States)

2017-08-01

Soil Properties Standoff Quantification of Soil Organic Matter Content in Surface Mineral Soils and Alaskan Peat En gi ne er R es ea rc h an d D...ERDC 6.2 GRE ARTEMIS STO-R DRTSPORE ERDC TR-17-9 August 2017 Spectral Assessment of Soil Properties Standoff Quantification of Soil Organic...Matter Content in Surface Mineral Soils and Alaskan Peat Stacey L. Jarvis, Karen L. Foley, Robert M. Jones, Stephen D. Newman, and Robyn A. Barbato

Effects of glyphosate on the mineral content of glyphosate-resistant soybeans (Glycine max).

Science.gov (United States)

Duke, Stephen O; Reddy, Krishna N; Bu, Kaixuan; Cizdziel, James V

2012-07-11

There are conflicting claims as to whether treatment with glyphosate adversely affects mineral nutrition of glyphosate-resistant (GR) crops. Those who have made claims of adverse effects have argued links between reduced Mn and diseases in these crops. This article describes experiments designed to determine the effects of a recommended rate (0.86 kg ha(-1)) of glyphosate applied once or twice on the mineral content of young and mature leaves, as well as in seeds produced by GR soybeans (Glycine max) in both the greenhouse and field using inductively coupled plasma mass spectrometry (ICP-MS). In the greenhouse, there were no effects of either one application (at 3 weeks after planting, WAP) or two applications (at 3 and 6 WAP) of glyphosate on Ca, Mg, Mn, Zn, Fe, Cu, Sr, Ba, Al, Cd, Cr, Co, or Ni content of young or old leaves sampled at 6, 9, and 12 WAP and in harvested seed. Se concentrations were too low for accurate detection in leaves, but there was also no effect of glyphosate applications on Se in the seeds. In the field study, there were no effects of two applications (at 3 and 6 WAP) of glyphosate on Ca, Mg, Mn, Zn, Fe, Cu, Sr, Ba, Al, Cd, Cr, Co, or Ni content of young or old leaves at either 9 or 12 WAP. There was also no effect on Se in the seeds. There was no difference in yield between control and glyphosate-treated GR soybeans in the field. The results indicate that glyphosate does not influence mineral nutrition of GR soybean at recommended rates for weed management in the field. Furthermore, the field studies confirm the results of greenhouse studies.

An evaluation of the effect of various gloves on polymerization inhibition of elastomeric impression materials: An In vitro study

Directory of Open Access Journals (Sweden)

Vinuta Hiremath

2017-01-01

Full Text Available Background: Latex protective barriers such as gloves and rubber dam material have been used widely in restorative procedures for crown and bridge. However, the chemical used during latex glove fabrication is thought to inhibit the polymerization of elastomeric impression materials used for impression making which has a detrimental effect on the dimensional accuracy and surface definition of resultant casts used for restorative procedures. The objectives of the study were to examine the surface of different elastomeric impressions on contact with various gloves. Materials and Methods: This clinical study included a total of eighty specimens of two types of the putty elastomeric impression material were hand manipulated by wearing three different gloves materials and is placed on a marked area of a clean and alcohol-treated glass slab at room temperature. The specimens examined for any signs of polymerization inhibition. The specimen will be rated as being “inhibited” if any residue remains on the glass slab and absence of the above will result as “no inhibition.” Results: The results showed no interference with the polymerization inhibition of the selected elastomers followed by the nitrile glove. The latex gloves showed inhibited set of the elastomeric impression material but set after sometime confirming time-dependent inhibition of the impression material. Conclusion: This study shows that the use of latex and sometime nitrile gloves during crown and bridge procedures should be contraindicated and the use of vinyl gloves should be stressed when working with elastomeric impression materials.

Effect of organic and conventional rearing system on the mineral content of pork.

Science.gov (United States)

Zhao, Yan; Wang, Donghua; Yang, Shuming

2016-08-01

Dietary composition and rearing regime largely determine the trace elemental composition of pigs, and consequently their concentration in animal products. The present study evaluates thirteen macro- and trace element concentrations in pork from organic and conventional farms. Conventional pigs were given a commercial feed with added minerals; organic pigs were given a feed based on organic feedstuffs. The content of macro-elements (Na, K, Mg and Ca) and some trace elements (Ni, Fe, Zn and Sr) in organic and conventional meat samples showed no significant differences (P>0.05). Several trace element concentrations in organic pork were significantly higher (Ppork: Cr (808 and 500μg/kg in organic and conventional pork, respectively), Mn (695 and 473μg/kg) and Cu (1.80 and 1.49mg/kg). The results showed considerable differences in mineral content between samples from pigs reared in organic and conventional systems. Our results also indicate that authentication of organic pork can be realized by applying multivariate chemometric methods such as discriminant analysis to this multi-element data. Copyright © 2016 Elsevier Ltd. All rights reserved.

Study by three techniques of the elastic response of Al(6061) matrix composite material with a high content (40 % vol) of SIC; Estudio mediante tres tecnicas del modulo elastico de un material compuesto de Al(6061) con un alto contenido (40%vol) de SiC

Energy Technology Data Exchange (ETDEWEB)

Fernandez, R.; Hunicke, U. D.; Mundt, K. H.; Acosta, P.; Kowalski, W.; Schulz, G.; Gonzalez-Doncel, G.

2001-07-01

The purpose of this investigation is to study the elastic behavior of a discontinuously reinforced composite material, Al(6061)-40vol%SiC, by using three different procedures; Extensometry in uniaxial testing, pendulum elastomeric, and propagation of acoustic signals in the materials. The high ceramic content of this material provides it with a high stiffness without a significant increase in density. Because of this, the material is suitable as structural component in the automotive and aerospace industry. (Author) 8 refs.

Interaction of Reinforced Elastomeric Bearings in Bridge Construction

Directory of Open Access Journals (Sweden)

Nittmannová Ľubica

2016-03-01

Full Text Available The aim of this paper is to demonstrate the behavior of reinforced elastomeric bearings under various loads. They are made of special types of bearings. The experimental verification of these special bearings has been tested on various types of loading. The results of the experimental measurements are compared with the results of the numerical modeling and calculations according to the standard assumptions in STN EN 1337-3. In the conclusion, the results are summarized for the selected types of bearings.

Sugar Profile, Mineral Content, and Rheological and Thermal Properties of an Isomerized Sweet Potato Starch Syrup.

Science.gov (United States)

Dominque, Brunson; Gichuhi, Peter N; Rangari, Vijay; Bovell-Benjamin, Adelia C

2013-01-01

Currently, corn is used to produce more than 85% of the world's high fructose syrup (HFS). There is a search for alternative HFS substrates because of increased food demand and shrinking economies, especially in the developing world. The sweet potato is a feasible, alternative raw material. This study isomerized a high glucose sweet potato starch syrup (SPSS) and determined its sugar profile, mineral content, and rheological and thermal properties. Rheological and thermal properties were measured using a rheometer and DSC, respectively. Sweet potato starch was hydrolyzed to syrup with a mean fructose content of 7.6 ± 0.4%. The SPSS had significantly higher (P syrups. During 70 days of storage, the SPSS acted as a non-Newtonian, shear-thinning liquid in which the viscosity decreased as shear stress increased. Water loss temperature of the SPSS continually decreased during storage, while pancake and ginger syrups' peak water loss temperature decreased initially and then increased. Further and more detailed studies should be designed to further enhance the fructose content of the syrup and observe its stability beyond 70 days. The SPSS has the potential to be used in human food systems in space and on Earth.

Preliminary SEM Observations on the Surface of Elastomeric Impression Materials after Immersion or Ozone Disinfection

Science.gov (United States)

Prombonas, Anthony; Yannikakis, Stavros; Karampotsos, Thanasis; Katsarou, Martha-Spyridoula; Drakoulis, Nikolaos

2016-01-01

Introduction Surface integrity of dental elastomeric impression materials that are subjected to disinfection is of major importance for the quality of the final prosthetic restorations. Aim The aim of this qualitative Scanning Electronic Microscopy (SEM) study was to reveal the effects of immersion or ozone disinfection on the surface of four dental elastomeric impression materials. Materials and Methods Four dental elastomeric impression material brands were used (two vinyl polysiloxane silicones, one polyether, and one vinyl polyether silicone). Total of 32 specimens were fabricated, eight from each impression material. Specimens were immersion (0.525% sodium hypochlorite solution or 0.3% benzalkonium chloride solution) or ozone disinfected or served as controls and examined with SEM. Results Surface degradation was observed on several speci-mens disinfected with 0.525% sodium hypochlorite solution. Similar wavy-wrinkling surface structures were observed in almost all specimens, when treated either with 0.3% benzalkonium chloride solution or ozone. Conclusion The SEM images obtained from this study revealed that both immersion disinfectants and ozone show similar impression material surface alterations. Ozone seems to be non-inferior as compared to immersion disinfectants, but superior as to environmental protection. PMID:28208993

Chemical Stability of Telavancin in Elastomeric Pumps.

Science.gov (United States)

Sand, Patrick; Aladeen, Traci; Kirkegaard, Paul; LaChance, Dennis; Slover, Christine

2015-12-01

VIBATIV is a once-daily, injectable lipoglycopeptide antibiotic approved in the U.S. for the treatment of hospital-acquired and ventilator-associated bacterial pneumonia (HABP/VABP) caused by susceptible isolates of Staphylococcus aureus when alternative treatments are not suitable. In addition, VIBATIV is approved in the U.S. for the treatment of adult patients with complicated skin & skin structure infections (cSSSI) caused by susceptible isolates of Gram-positive bacteria, including Staphylococcus aureus, both methicillin-susceptible (MSSA) and methicillin-resistant (MRSA) strains. To evaluate the chemical stability of telavancin (Vibativ; Theravance Biopharma US, Inc, Northbrook, Illinois), a lipoglycopeptide antibiotic with activity against methicillin-resistant Staphylococcus aureus, in 2 types of elastomeric pumps, the Intermate Infusion System (Baxter International Inc) and the Homepump Eclipse (I-Flow Corporation). Different sizes of the Baxter (Ontario, Canada) (105 mL and 275 mL) and I-Flow (Stoughton, Massachusetts) (100 mL and 250 mL) pumps were compared with glass controls. The telavancin drug product was reconstituted and diluted to concentrations of 0.6 mg/mL and 8.0 mg/mL using either 0.9% saline, 5% dextrose in water, or sterilized water for injection (0.6 mg/mL telavancin) or saline (8.0 mg/mL telavancin) followed by Ringer's Lactate solution. Pumps were filled and stored at 2°C to 8°C, protected from light. Aliquots from both pump types and for all telavancin reconstitution/dilution schemes and concentrations were taken over a period of 8 days and analyzed for appearance, pH, telavancin concentration and purity, and degradation products. The pH of all pump solutions remained consistent throughout the 8-day analysis period, within a range of 4.6 to 5.7 for the 0.6 mg/mL and 4.4 to 4.9 for the 8.0 mg/mL telavancin solutions. There was no significant change in the chromatographic purity for any of the pump solutions examined. All decreases in

Influence of Bifidobacterium bifidum on release of minerals from bread with differing bran content.

Science.gov (United States)

Nalepa, Beata; Siemianowska, Ewa; Skibniewska, Krystyna Anna

2012-01-01

Bread is considered an important source of minerals; however, the presence of fiber and phytic acid reduces bioavailability of minerals from cereal products. It is well established that activity of microorganisms in human gut increases the amount of nutrients released during digestion. The aim of this study was to determine the influence of Bifidobacterium bifidum on release of some minerals from bread using an in vitro process of enzymatic digestion. White bread and with addition of 15, 30, or 45% of bran was baked in a bakery by traditional methods, with addition of yeasts and rye leaven, from flour made of wheat, Tonacja variety. Concentrations of calcium, magnesium, manganese, zinc, copper, and iron were determined by atomic absorption spectrometry. Bread was enzymatically digested in vitro without and with the addition of Bifidobacterium bifidum KD6 (inoculum 10(6) CFU/cm(3)) and percentages of minerals released were determined. The concentration of minerals released during enzymatic digestion varied depending upon the element, quantity of bran, and presence of bacteria. Increase in bran content decreased release of elements. Bifidobacterium bifidum KD6 enhanced amounts of magnesium and zinc released from all types of bread, while manganese and copper rose only from white bread with 15% bran addition. Bacteria decreased amounts of calcium and iron released from bread. Data indicate that diets rich in beneficial bacteria (probiotics) but not balanced with minerals might increase mineral deficiency.

Three-Dimensional Elastomeric Scaffolds Designed with Cardiac-Mimetic Structural and Mechanical Features

Science.gov (United States)

Neal, Rebekah A.; Jean, Aurélie; Park, Hyoungshin; Wu, Patrick B.; Hsiao, James; Engelmayr, George C.; Langer, Robert

2013-01-01

Tissue-engineered constructs, at the interface of material science, biology, engineering, and medicine, have the capacity to improve outcomes for cardiac patients by providing living cells and degradable biomaterials that can regenerate the native myocardium. With an ultimate goal of both delivering cells and providing mechanical support to the healing heart, we designed three-dimensional (3D) elastomeric scaffolds with (1) stiffnesses and anisotropy mimicking explanted myocardial specimens as predicted by finite-element (FE) modeling, (2) systematically varied combinations of rectangular pore pattern, pore aspect ratio, and strut width, and (3) structural features approaching tissue scale. Based on predicted mechanical properties, three scaffold designs were selected from eight candidates for fabrication from poly(glycerol sebacate) by micromolding from silicon wafers. Large 20×20 mm scaffolds with high aspect ratio features (5:1 strut height:strut width) were reproducibly cast, cured, and demolded at a relatively high throughput. Empirically measured mechanical properties demonstrated that scaffolds were cardiac mimetic and validated FE model predictions. Two-layered scaffolds providing fully interconnected pore networks were fabricated by layer-by-layer assembly. C2C12 myoblasts cultured on one-layered scaffolds exhibited specific patterns of cell elongation and interconnectivity that appeared to be guided by the scaffold pore pattern. Neonatal rat heart cells cultured on two-layered scaffolds for 1 week were contractile, both spontaneously and in response to electrical stimulation, and expressed sarcomeric α-actinin, a cardiac biomarker. This work not only demonstrated several scaffold designs that promoted functional assembly of rat heart cells, but also provided the foundation for further computational and empirical investigations of 3D elastomeric scaffolds for cardiac tissue engineering. PMID:23190320

Profiling contents of water-soluble metabolites and mineral nutrients to evaluate the effects of pesticides and organic and chemical fertilizers on tomato fruit quality.

Science.gov (United States)

Watanabe, Masami; Ohta, Yuko; Licang, Sun; Motoyama, Naoki; Kikuchi, Jun

2015-02-15

In this study, the contents of water-soluble metabolites and mineral nutrients were measured in tomatoes cultured using organic and chemical fertilizers, with or without pesticides. Mineral nutrients and water-soluble metabolites were determined by inductively coupled plasma-atomic emission spectrometry and (1)H nuclear magnetic resonance spectrometry, respectively, and results were analysed by principal components analysis (PCA). The mineral nutrient and water-soluble metabolite profiles differed between organic and chemical fertilizer applications, which accounted for 88.0% and 55.4%, respectively, of the variation. (1)H-(13)C-hetero-nuclear single quantum coherence experiments identified aliphatic protons that contributed to the discrimination of PCA. Pesticide application had little effect on mineral nutrient content (except Fe and P), but affected the correlation between mineral nutrients and metabolites. Differences in the content of mineral nutrients and water-soluble metabolites resulting from different fertilizer and pesticide applications probably affect tomato quality. Copyright © 2014 Elsevier Ltd. All rights reserved.

Role of light and heavy minerals on natural radioactivity level of high background radiation area, Kerala, India.

Science.gov (United States)

Ramasamy, V; Sundarrajan, M; Suresh, G; Paramasivam, K; Meenakshisundaram, V

2014-02-01

Natural radionuclides ((238)U, (232)Th and (40)K) concentrations and eight different radiological parameters have been analyzed for the beach sediments of Kerala with an aim of evaluating the radiation hazards. Activity concentrations ((238)U and (232)Th) and all the radiological parameters in most of the sites have higher values than recommended values. The Kerala beach sediments pose significant radiological threat to the people living in the area and tourists going to the beaches for recreation or to the sailors and fishermen involved in their activities in the study area. In order to know the light mineral characterization of the present sediments, mineralogical analysis has been carried out using Fourier transform infrared (FTIR) spectroscopic technique. The eight different minerals are identified and they are characterized. Among the various observed minerals, the minerals such as quartz, microcline feldspar, kaolinite and calcite are major minerals. The relative distribution of major minerals is determined by calculating extinction co-efficient and the values show that the amount of quartz is higher than calcite and much higher than microcline feldspar. Crystallinity index is calculated to know the crystalline nature of quartz present in the sediments. Heavy mineral separation analysis has been carried out to know the total heavy mineral (THM) percentage. This analysis revealed the presence of nine heavy minerals. The minerals such as monazite, zircon, magnetite and illmenite are predominant. Due to the rapid and extreme changes occur in highly dynamic environments of sandy beaches, quantities of major light and heavy minerals are widely varied from site to site. Granulometric analysis shows that the sand is major content. Multivariate statistical (Pearson correlation, cluster and factor) analysis has been carried out to know the effect of mineralogy on radionuclide concentrations. The present study concluded that heavy minerals induce the (238)U and (232)Th

Comparison of Mineral Element Content in a Functional Food Maca (Lepidium meyenii Walp. from Asia and South America

Directory of Open Access Journals (Sweden)

Ji Zhang

2015-01-01

Full Text Available Contents of eight mineral elements in maca (Lepidium meyenii Walp. from China and Peru were determined by inductively coupled plasma optical emission spectroscopy. Cu contents in maca samples from China (2.5–31 mg kg−1 dry weight, dw were higher than the samples from Peru (<2.1 mg kg−1 dw. Na in two samples from China was found to be significantly of high content (2400 and 2600 mg kg−1 dw. The contents (mg kg−1 dw of B, Co, Cr, Li, Ni, and Zn were, respectively, 8.1–21, <0.023, <1.1~3.5, 0.020–0.17, 0.085–4.5, and 10–39 for the samples from China, while being 6.6–12, <0.023, <1.1~2.3, 0.035–0.063, 0.68–1.7, and 27–39 for the samples from Peru.

Preparation of novel ceramics with high CaO content from steel slag

International Nuclear Information System (INIS)

Zhao, Lihua; Li, Yu; Zhou, Yuanyuan; Cang, Daqiang

2014-01-01

Highlights: • Efficiently utilize such solid waste with high CaO content. • A novel ceramics was put forward by traditional ceramic process. • The novel ceramics attained high strength. • Sintering mechanisms of the novel ceramics were discussed. - Abstract: Steel slag, an industrial waste discharged from steelmaking process, cannot be extensively used in traditional aluminosilicate based ceramics manufacturing for its high content of calcium oxide. In order to efficiently utilize such solid waste, a method of preparing ceramics with high CaO content was put forward. In this paper, steel slag in combination with quartz, talcum, clay and feldspar was converted to a novel ceramic by traditional ceramic process. The sintering mechanism, microstructure and performances were studied by scanning electron microscope (SEM), X-ray diffraction (XRD) techniques, combined experimenting of linear shrinkage, water absorption and flexural strength. The results revealed that all crystal phases in the novel ceramic were pyroxene group minerals, including diopsite ferrian, augite and diopsite. Almost all raw materials including quartz joined the reaction and transformed into pyroxene or glass phase in the sintering process, and different kinds of clays and feldspars had no impact on the final crystal phases. Flexural strength of the ceramic containing 40 wt.% steel slag in raw materials can reach 143 MPa at sintering temperature of 1210 °C and its corresponding water absorption, weight loss, linear shrinkage were 0.02%, 8.8%, 6.0% respectively. Pyroxene group minerals in ceramics would contribute to the excellent physical and mechanical properties

Seismic isolation of nuclear power plants using elastomeric bearings

Science.gov (United States)

Kumar, Manish

Seismic isolation using low damping rubber (LDR) and lead-rubber (LR) bearings is a viable strategy for mitigating the effects of extreme earthquake shaking on safety-related nuclear structures. Although seismic isolation has been deployed in nuclear structures in France and South Africa, it has not seen widespread use because of limited new build nuclear construction in the past 30 years and a lack of guidelines, codes and standards for the analysis, design and construction of isolation systems specific to nuclear structures. The nuclear accident at Fukushima Daiichi in March 2011 has led the nuclear community to consider seismic isolation for new large light water and small modular reactors to withstand the effects of extreme earthquakes. The mechanical properties of LDR and LR bearings are not expected to change substantially in design basis shaking. However, under shaking more intense than design basis, the properties of the lead cores in lead-rubber bearings may degrade due to heating associated with energy dissipation, some bearings in an isolation system may experience net tension, and the compression and tension stiffness may be affected by the horizontal displacement of the isolation system. The effects of intra-earthquake changes in mechanical properties on the response of base-isolated nuclear power plants (NPPs) were investigated using an advanced numerical model of a lead-rubber bearing that has been verified and validated, and implemented in OpenSees and ABAQUS. A series of experiments were conducted at University at Buffalo to characterize the behavior of elastomeric bearings in tension. The test data was used to validate a phenomenological model of an elastomeric bearing in tension. The value of three times the shear modulus of rubber in elastomeric bearing was found to be a reasonable estimate of the cavitation stress of a bearing. The sequence of loading did not change the behavior of an elastomeric bearing under cyclic tension, and there was no

Measurement of humerus and radius bone mineral content in the term and preterm infant

International Nuclear Information System (INIS)

Vyhmeister, N.R.; Linkhart, T.A.

1988-01-01

We compared two anatomic sites for single-photon absorptiometric measurement of bone mineral content (BMC) in term and preterm infants. The distal one third of the radius and the midportion of the humerus were evaluated for measurements of BMC with an unmodified, commercially available bone densitometer. We assessed reproducibility of BMC and bone width (BW) measurements and defined normal at-birth ranges of BMC, BW, and BMC/BW ratio for infants with gestational ages of 24 to 42 weeks. Humerus BMC correlated with gestational age, birth weight, and BW of patients and did not differ from humerus BMC values determined over the same range of gestational ages at another center. Representative serial measurements of two very low birth weight (VLBW) infants are presented to demonstrate the feasibility of using humerus BMC in longitudinal studies to assess changes in bone mineralization. We conclude that bone densitometer measurements of mid-humerus BMC can be successfully performed and are preferable to similar measurements of the radius for VLBW infants. Normal humerus BMC values were defined for use in diagnosis and evaluation of the efficacy of treatment in VLBW infants who are at high risk of developing osteopenia of prematurity

Sensitivity improvement of a fibre Bragg grating pH sensor with elastomeric coating

Science.gov (United States)

Yulianti, Ian; Supa'at, A. S. M.; Idrus, Sevia M.; Kurdi, Ojo; Anwar, M. R. S.

2012-01-01

A new optical pH sensor based on fibre Bragg grating (FBG) is demonstrated. The sensor consists of a FBG coated with pH sensitive hydrogel. The sensing was performed through the detection of wavelength shifts resulting from the induced strain on the FBG due to mechanical expansion of the hydrogel. An elastomeric coating was applied before the hydrogel coating to improve the sensitivity. The sensor performance was investigated by simulating the hydrogel swelling and the strain induced on the FBG. The swelling of hydrogel due to pH change was modelled using a free-energy function and was solved using the finite element method. With silicone rubber as the elastomer material, the results show that the sensitivity was improved by up to 66% compared to that of the FBG pH sensor without elastomeric coating.

Sensitivity improvement of a fibre Bragg grating pH sensor with elastomeric coating

International Nuclear Information System (INIS)

Yulianti, Ian; Supa'at, A S M; Idrus, Sevia M; Anwar, M R S; Kurdi, Ojo

2012-01-01

A new optical pH sensor based on fibre Bragg grating (FBG) is demonstrated. The sensor consists of a FBG coated with pH sensitive hydrogel. The sensing was performed through the detection of wavelength shifts resulting from the induced strain on the FBG due to mechanical expansion of the hydrogel. An elastomeric coating was applied before the hydrogel coating to improve the sensitivity. The sensor performance was investigated by simulating the hydrogel swelling and the strain induced on the FBG. The swelling of hydrogel due to pH change was modelled using a free-energy function and was solved using the finite element method. With silicone rubber as the elastomer material, the results show that the sensitivity was improved by up to 66% compared to that of the FBG pH sensor without elastomeric coating

Mineral content in grains of seven food-grade sorghum hybrids grown in Mediterranean environment

Science.gov (United States)

Sorghum is a major crop used for food, feed and industrial purposes worldwide. The objective of this study was to determine the mineral content in grains of seven white food-grade sorghum hybrids bred and adapted for growth in the central USA and grown in a Mediterranean area of Southern Italy. The ...

Pretreatment process for mineral analysis in FFH using INAA-method and evaluation of mineral intakes

International Nuclear Information System (INIS)

Lee, Ok Hee; Youn, Kyung Jin; Lee, Ji Bum; Kim, Mi Jin

2010-05-01

This study were aimed to set up the pre-treatment process for FFH and analyse Pretreatment processes for the analysis of food mineral contents by INAA were established according to FFH state using freeze-drying and homogenization. The Se contents showed higher precision with INAA-method than ICP-method. The content of Ca, Na, Mg, Fe, Zn, Cu, Mn, Cr, Co in FFH measured using INAA-method showed that the mineral contents in the amount of recommended intakes by manufacturer were not significantly different according to FFH type. The average Ca contents was the highest in Yousanguns > nutritional supplement> glucosamines. The average K content of FFH with one serving size were the highest in glucosamines>aloes> nutritional supplements. I content among FFH was the highest in nutritional supplements. The average Mg contents were highest in Chlorella-Spirurina and Aloes. The average Cu content of FFH was the highest in Yeasts. The contents of Fe, Zn and Se were the highest in nutritional supplements. The mineral contents in recommended intake amounts by manufacturer were over the maximum contents regulated by Korean FDA in some imported FFH products. their mineral contents of FFH using NAA-method and to assess the mineral intakes by FFH

Pretreatment process for mineral analysis in FFH using INAA-method and evaluation of mineral intakes

Energy Technology Data Exchange (ETDEWEB)

Lee, Ok Hee; Youn, Kyung Jin; Lee, Ji Bum; Kim, Mi Jin [Yongin University, Yongin (Korea, Republic of)

2010-05-15

This study were aimed to set up the pre-treatment process for FFH and analyse Pretreatment processes for the analysis of food mineral contents by INAA were established according to FFH state using freeze-drying and homogenization. The Se contents showed higher precision with INAA-method than ICP-method. The content of Ca, Na, Mg, Fe, Zn, Cu, Mn, Cr, Co in FFH measured using INAA-method showed that the mineral contents in the amount of recommended intakes by manufacturer were not significantly different according to FFH type. The average Ca contents was the highest in Yousanguns > nutritional supplement> glucosamines. The average K content of FFH with one serving size were the highest in glucosamines>aloes> nutritional supplements. I content among FFH was the highest in nutritional supplements. The average Mg contents were highest in Chlorella-Spirurina and Aloes. The average Cu content of FFH was the highest in Yeasts. The contents of Fe, Zn and Se were the highest in nutritional supplements. The mineral contents in recommended intake amounts by manufacturer were over the maximum contents regulated by Korean FDA in some imported FFH products. their mineral contents of FFH using NAA-method and to assess the mineral intakes by FFH

Iron content and solubility in dust from high-alpine snow along a north-south transect of High Asia

OpenAIRE

Wu, Guangjian; Zhang, Chenglong; Li, Zhongqin; Zhang, Xuelei; Gao, Shaopeng

2012-01-01

This study describes the dissolved and insoluble iron fraction of dust (mineral aerosol) in high-alpine snow samples collected along a north-south transect across High Asia (Eastern Tien Shan, Qilian Shan, and Southern Tibetan Plateau). This dust provides the basic chemical properties of mid- and high-level tropospheric Asian dust that can supply the limiting iron nutrient for phytoplankton growth in the North Pacific. The iron content in Asian dust averages 4.95% in Eastern Tien Shan, 3.38–5...

Antibiotic stability related to temperature variations in elastomeric pumps used for outpatient parenteral antimicrobial therapy (OPAT).

Science.gov (United States)

Voumard, Rachel; Van Neyghem, Niklas; Cochet, Camille; Gardiol, Céline; Decosterd, Laurent; Buclin, Thierry; de Valliere, Serge

2017-05-01

Elastomeric pumps can be used for the continuous administration of antimicrobials in the outpatient setting. A potentially limiting factor in their use is the stability of antimicrobials. To investigate under real-life conditions the temperature variations of antibiotic solutions contained in elastomeric pumps, and to examine under such conditions the stability of five antibiotics. Healthy volunteers carried the elastomeric pumps in carry pouches during their daily activities. A thermologger measured the temperatures every 15 min over 24 h. Antibiotic concentrations were measured by HPLC coupled to tandem MS. During daytime, the temperature of solutions in the pumps increased steadily, warming to >30°C. During the night, when the pumps were kept attached to the waist, the temperatures reached up to 33°C. The use of white carry pouches avoided excessive temperature increases. Over seven experiments, cefazolin, cefepime, piperacillin and tazobactam were found to be stable over 24 h. Flucloxacillin showed a mean decrease in concentration of 11% ( P  = 0.001). Real-life situations can cause significant temperature rises in elastomeric pumps, thereby potentially increasing the risk of antibiotic degradation. Patients should be instructed to avoid situations causing excessive temperature increases. Despite these temperature variations, cefazolin, cefepime, piperacillin and tazobactam were found to be stable over 24 h. A moderate degradation was noticed for flucloxacillin, albeit most probably not to an extent that might impair anti-infective efficacy. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Total body and regional bone mineral content in hemodialysis patients

International Nuclear Information System (INIS)

Hagiwara, Satoshi; Aratani, Hideyui; Miki, Takami; Nishizawa, Yoshiki; Okamura, Terue; Koizumi, Yoshiko; Ochi, Hironobu; Morii, Hirotoshi

1994-01-01

Bone mineral content (BMC) in the total body and lumbar spine was evaluated in 126 hemodialysis patients (60 males, 66 females) by dual photon absorptiometry with the Norland DBD 2600. Measurements of: 1) total body BMC divided by lean body mass (BMC TB /LBM), 2) bone mineral density (BMD) of total body, 3) BMD of four regional sections (head, trunk, pelvis, and legs), and 4) BMD of lumbar spine, generally showed a significant decrease in the hemodialysis patients compared to the reference population. However, arm BMD did not show a significant difference between patients and control populations. The z-score of BMC TB /LBM declined significantly throughout the duration of hemodialysis, although that of the lumbar spine BMD did not. It should be noted that the degree of decrease in BMC was more prominent in the total body measurement than in the lumbar spine measurement. There was preferential osteopenia of the total body in the hemodialysis patients. Although the lumbar spine BMD showed a lower value than the control population, the lumbar spine is not the recommended region to monitor the BMD change in hemodialysis patients. (author)

A multicenter study of the influence of fat and lean mass on bone mineral content

DEFF Research Database (Denmark)

Hla, M M; Davis, J W; Ross, P D

1996-01-01

We examined the relative influence of fat and lean mass on bone mineral content (BMC) among 1600 early postmenopausal women aged 45-59 y from four geographical locations (Nottingham, United Kingdom; Portland, OR; Honolulu; and Copenhagen). Bone sites investigated included the major fracture sites...

Natural mineral bottled waters available on the Polish market as a source of minerals for the consumers. Part 1. Calcium and magnesium.

Science.gov (United States)

Gątarska, Anna; Tońska, Elżbieta; Ciborska, Joanna

2016-01-01

Natural mineral waters may be an essential source of calcium, magnesium and other minerals. In bottled waters, minerals occur in an ionized form which is very well digestible. However, the concentration of minerals in underground waters (which constitute the material for the production of bottled waters) varies. In view of the above, the type of water consumed is essential. The aim of the study was to estimate the calcium and magnesium contents in products available on the market and to evaluate calcium and magnesium consumption with natural mineral water by different consumer groups with an assumed volume of the consumed product. These represented forty different brands of natural mineral available waters on Polish market. These waters were produced in Poland or other European countries. Among the studied products, about 30% of the waters were imported from Lithuania, Latvia, Czech Republic, France, Italy and Germany. The content of calcium and magnesium in mineral waters was determined using flame atomic absorption spectrometry in an acetylene-air flame. Further determinations were carried out using atomic absorption spectrometer--ICE 3000 SERIES-THERMO-England, equipped with a GLITE data station, background correction (a deuterium lamp) as well as other cathode lamps. Over half of the analysed natural mineral waters were medium-mineralized. The natural mineral waters available on the market can be characterized by a varied content of calcium and magnesium and a high degree of product mineralization does not guarantee significant amounts of these components. Among the natural mineral waters available on the market, only a few feature the optimum calcium-magnesium proportion (2:1). Considering the mineralization degree of the studied products, it can be stated that the largest percentage of products with significant calcium and magnesium contents can be found in the high-mineralized water group. For some natural mineral waters, the consumption of 1 litre daily may

Interaction genotype by season and its influence on the identification of beans with high content of zinc and iron

Directory of Open Access Journals (Sweden)

Camila Andrade Silva

2012-01-01

Full Text Available The mineral contents in common bean seeds are influenced, in addition to genetic variation, by environmental crop conditions, especially by the soil type and chemical composition and by the genotype x environment interaction. This study was carried out to verify if the zinc and iron contents are affected by the crop growing period. Ten lines with high iron and zinc contents and ten with low contents were assessed in three seasons: "wet season" of 2009/2010 (sowing in November; "dry season" of 2010 (sowing in February and "winter season" of 2010 (sowing in July, in Lavras, Minas Gerais State, Brazil. The experimental design used was randomized blocks with three replications and plots consisting of two rows of two meters, with a spacing of 0.50 m. The seeds harvested were assessed in regard to iron and zinc mineral contents. The greatest contents were observed in the winter season and the smallest ones in the dry season, with sowing in February. It was observed that in the mean of the three harvests, the lines classified as having high iron and zinc content exhibited an iron quantity 11.0% and a zinc quantity 6.8% above those of low content. The lines by seasons interaction occurs. However, its interference in identification of the groups with high and low content of the two nutrients is not great.

[Quantitative image of bone mineral content--dual energy subtraction in a single exposure].

Science.gov (United States)

Katoh, T

1990-09-25

A dual energy subtraction system was constructed on an experimental basis for the quantitative image of bone mineral content. The system consists of a radiography system and an image processor. Two radiograms were taken with dual x-ray energy in a single exposure using an x-ray beam dichromized by a tin filter. In this system, a film cassette was used where a low speed film-screen system, a copper filter and a high speed film-screen system were layered on top of each other. The images were read by a microdensitometer and processed by a personal computer. The image processing included the corrections of the film characteristics and heterogeneity in the x-ray field, and the dual energy subtraction in which the effect of the high energy component of the dichromized beam on the tube side image was corrected. In order to determine the accuracy of the system, experiments using wedge phantoms made of mixtures of epoxy resin and bone mineral-equivalent materials in various fractions were performed for various tube potentials and film processing conditions. The results indicated that the relative precision of the system was within +/- 4% and that the propagation of the film noise was within +/- 11 mg/cm2 for the 0.2 mm pixels. The results also indicated that the system response was independent of the tube potential and the film processing condition. The bone mineral weight in each phalanx of the freshly dissected hand of a rhesus monkey was measured by this system and compared with the ash weight. The results showed an error of +/- 10%, slightly larger than that of phantom experiments, which is probably due to the effect of fat and the variation of focus-object distance. The air kerma in free air at the object was approximately 0.5 mGy for one exposure. The results indicate that this system is applicable to clinical use and provides useful information for evaluating a time-course of localized bone disease.

Bone Tissue Collagen Maturity and Mineral Content Increase With Sustained Hyperglycemia in the KK-Ay Murine Model of Type 2 Diabetes.

Science.gov (United States)

Hunt, Heather B; Pearl, Jared C; Diaz, David R; King, Karen B; Donnelly, Eve

2018-05-01

Type 2 diabetes mellitus (T2DM) increases fracture risk for a given bone mineral density (BMD), which suggests that T2DM changes bone tissue properties independently of bone mass. In this study, we assessed the effects of hyperglycemia on bone tissue compositional properties, enzymatic collagen crosslinks, and advanced glycation end-products (AGEs) in the KK-Ay murine model of T2DM using Fourier transform infrared (FTIR) imaging and high-performance liquid chromatography (HPLC). Compared to KK-aa littermate controls (n = 8), proximal femoral bone tissue of KK-Ay mice (n = 14) exhibited increased collagen maturity, increased mineral content, and less heterogeneous mineral properties. AGE accumulation assessed by the concentration of pentosidine, as well as the concentrations of the nonenzymatic crosslinks hydroxylysylpyridinoline (HP) and lysyl pyridinoline (LP), did not differ in the proximal femurs of KK-Ay mice compared to controls. The observed differences in tissue-level compositional properties in the KK-Ay mice are consistent with bone that is older and echo observations of reduced remodeling in T2DM. © 2017 American Society for Bone and Mineral Research. © 2017 American Society for Bone and Mineral Research.

Chemical Stability of Telavancin in Elastomeric Pumps☆

Science.gov (United States)

Sand, Patrick; Aladeen, Traci; Kirkegaard, Paul; LaChance, Dennis; Slover, Christine

2015-01-01

Background VIBATIV is a once-daily, injectable lipoglycopeptide antibiotic approved in the U.S. for the treatment of hospital-acquired and ventilator-associated bacterial pneumonia (HABP/VABP) caused by susceptible isolates of Staphylococcus aureus when alternative treatments are not suitable. In addition, VIBATIV is approved in the U.S. for the treatment of adult patients with complicated skin & skin structure infections (cSSSI) caused by susceptible isolates of Gram-positive bacteria, including Staphylococcus aureus, both methicillin-susceptible (MSSA) and methicillin-resistant (MRSA) strains. Objective To evaluate the chemical stability of telavancin (Vibativ; Theravance Biopharma US, Inc, Northbrook, Illinois), a lipoglycopeptide antibiotic with activity against methicillin-resistant Staphylococcus aureus, in 2 types of elastomeric pumps, the Intermate Infusion System (Baxter International Inc) and the Homepump Eclipse (I-Flow Corporation). Methods Different sizes of the Baxter (Ontario, Canada) (105 mL and 275 mL) and I-Flow (Stoughton, Massachusetts) (100 mL and 250 mL) pumps were compared with glass controls. The telavancin drug product was reconstituted and diluted to concentrations of 0.6 mg/mL and 8.0 mg/mL using either 0.9% saline, 5% dextrose in water, or sterilized water for injection (0.6 mg/mL telavancin) or saline (8.0 mg/mL telavancin) followed by Ringer’s Lactate solution. Pumps were filled and stored at 2°C to 8°C, protected from light. Aliquots from both pump types and for all telavancin reconstitution/dilution schemes and concentrations were taken over a period of 8 days and analyzed for appearance, pH, telavancin concentration and purity, and degradation products. Results The pH of all pump solutions remained consistent throughout the 8-day analysis period, within a range of 4.6 to 5.7 for the 0.6 mg/mL and 4.4 to 4.9 for the 8.0 mg/mL telavancin solutions. There was no significant change in the chromatographic purity for any of the pump

Radiation resistance of elastomeric O-rings in mixed neutron and gamma fields: Testing methodology and experimental results

Science.gov (United States)

Zenoni, A.; Bignotti, F.; Donzella, A.; Donzella, G.; Ferrari, M.; Pandini, S.; Andrighetto, A.; Ballan, M.; Corradetti, S.; Manzolaro, M.; Monetti, A.; Rossignoli, M.; Scarpa, D.; Alloni, D.; Prata, M.; Salvini, A.; Zelaschi, F.

2017-11-01

Materials and components employed in the presence of intense neutron and gamma fields are expected to absorb high dose levels that may induce deep modifications of their physical and mechanical properties, possibly causing loss of their function. A protocol for irradiating elastomeric materials in reactor mixed neutron and gamma fields and for testing the evolution of their main mechanical and physical properties with absorbed dose has been developed. Four elastomeric compounds used for vacuum O-rings, one fluoroelastomer polymer (FPM) based and three ethylene propylene diene monomer rubber (EPDM) based, presently available on the market have been selected for the test. One EPDM is rated as radiation resistant in gamma fields, while the other elastomers are general purpose products. Particular care has been devoted to dosimetry calculations, since absorbed dose in neutron fields, unlike pure gamma fields, is strongly dependent on the material composition and, in particular, on the hydrogen content. The products have been tested up to about 2 MGy absorbed dose. The FPM based elastomer, in spite of its lower dose absorption in fast neutron fields, features the largest variations of properties, with a dramatic increase in stiffness and brittleness. Out of the three EPDM based compounds, one shows large and rapid changes in the main mechanical properties, whereas the other two feature more stable behaviors. The performance of the EPDM rated as radiation resistant in pure gamma fields does not appear significantly better than that of the standard product. The predictive capability of the accelerated irradiation tests performed as well as the applicable concepts of threshold of radiation damage is discussed in view of the use of the examined products in the selective production of exotic species facility, now under construction at the Legnaro National Laboratories of the Italian Istituto Nazionale di Fisica Nucleare. It results that a careful account of dose rate effects

SALT ACCLIMATION OF TRITICUM-AESTIVUM BY CHOLINE CHLORIDE - PLANT-GROWTH, MINERAL-CONTENT, AND CELL-PERMEABILITY

NARCIS (Netherlands)

MANSOUR, MM; STADELMANN, EJ; LEESTADELMANN, OY

1993-01-01

Seedlings of a salt sensitive line of Triticum aestivum were grown in Hoagland solution supplemented with 100 mM NaCl following a pretreatment with choline chloride (ChCl). Changes in growth, mineral content of roots and shoots, and passive permeability of the cell membrane were measured. Relative

Rumen metabolism and absorption of a 14C-labelled elastomeric copolymer and its value as a roughage substitute for cattle

International Nuclear Information System (INIS)

Bartley, E.E.; Meyer, R.M.; Call, E.P.

1981-01-01

Several synthetic elastomeric and plastomeric polymers were tested for suitability as artificial roughages. They were fed to rumenfistulated cattle fed grain only. Several of the polymers were regurgitated, remasticated and reswallowed, and they formed thin strands of intermeshed fiber that produced a large, loosely woven hay-like mass that floated on the rumen contents. An elastomeric polymer consisting of copolymers of 80 to 90% ethylene and 10 to 20% propylene, with a tensile strength at yield of 45.7 kg/cm2, a hardness of 30 units (Shore D hardness scale) and a tensile strength at 300% elongation of 51.0 kg/cm2, was selected for further testing. The copolymer was fed at about 90 g/head daily for 127 days to cattle fed grain only. At slaughter, rumens contained an average of 8.0 kg copolymer (dry basis). Cattle fed the copolymer had healthier rumen papillae and epithelia of the abomasum and small intestines than did control animals fed grain only. Using 14 C-labeled copolymer, we found that the copolymer was not degraded by rumen microorganisms or acid-pepsin solution. When 14 C-labeled copolymer was fed to milking cows, no 14 C activity was found in milk, blood or urine. Upon slaughter, about 100% of the 14 C activity was recovered from digesta and feces. We concluded that the copolymer was not absorbed from the digestive tract

Thermoelastic properties of minerals at high temperature

Indian Academy of Sciences (India)

In our present study, we have investigated the thermophysical properties of two minerals (pyrope-rich garnet and MgAl2O4) under high temperatures and calculated the second-order elastic constant () and bulk modulus (T) of the above minerals, in two cases first by taking Anderson–Gruneisen parameter (T) as ...

The assessment of cortical and spongy bone mineral content with quantitative computed tomography

International Nuclear Information System (INIS)

Sakurai, Kiyoko; Matsubayashi, Takashi; Aritomi, Hiroshi; Iwanami, Shigeru; Kusano, Shouichi; Marumo, Fumiaki.

1991-01-01

The CT numbers of cortex at the level of 20 cm (CT20) and spongiosa in the lateral condyle at the level of 2 cm (CT02) proximal from the distal end of the femur, and the bone mineral density of spongiosa in the L3 body (BMD), were obtained by QCT. The study included 43 female patients with rheumatoid arthritis (RA), 71 female patients with primary osteoporosis (OP), 20 female nondialyzed patients with chronic renal failure (CRF: nonHD), 37 hemodialyzed patients (CRF: HD),including 13 parathyroidectomized patients (CRF: HD, PTX), and 10 healthy volunteers. CT20 correlated closely with age in RA. CT02 and BMD correlated closely with age in RA and OP. CT20 and CT02 correlated closely with the duration of hemodialysis in CRF:HD, but not with the duration of disease in RA. The values of CT20 and CT02 in the CRF: HD. PTX group was significantly lower than those in the other CRF groups. BMD in the RA group was not different from that of healthy volunteers. The CT20 values of the one-third of RA patients older than 60 years were extremely low compared with those of the other two-thirds. The results indicated that BMD was useful in assessing bone mineral content in OP, but not in RA. CT02 and CT20 were useful in assessing bone mineral content in these three diseases, CT20 was especially useful for patients in the CRF: HD group and those with RA older than 60 years, but it was not useful in the CRF: nonHD group. (author)

Proximate composition, mineral content and functional properties of Tarap (Artocarpus odoratissimus seed flour

Directory of Open Access Journals (Sweden)

Noorfarahzilah, M.

2017-06-01

Full Text Available Tarap seed (Artocarpus odoratissimus is one of the popular snacks among Borneo Island people especially in Sabah, Malaysia. Their flesh and seed are such a potential food source but they are not fully exploited. Therefore, this study was conducted to determine its nutritional composition, mineral content and functional properties of Tarap seed flour (TSF. The proximate analysis (protein, carbohydrate, fat, crude fiber, ash, moisture, minerals content and functional properties (powder particle size, bulk density, oil and water absorption capacity, emulsion capacity, foaming ability, least gelling concentration, swelling ability and pasting properties were determined. The proximate analysis results obtained showed that TSF had 49.65% carbohydrate, 15.60% crude fat, 12.3% crude fibers, 8.8% crude protein, 1.17 % ash and 12.5% moisture. Most abundant mineral found in Tarap flour was potassium, followed by magnesium, calcium, and natrium. The results showed that TSF has an average particle size of 166.02μm with low bulk density (0.57g/cm3 as compared to wheat flour. Water and oil absorption capacities of TSF were 2.61 and 1.69g/g, respectively, while the efficiency of emulsification was 14.8%. Least gelation concentration was found to be 12% while foaming ability was 7%. Swelling ability results showed a steady increment from 60°C to 70°C but sharp increased observed from 70°C to 80°C. From the results presented, it can be concluded that TSF has a great potential for use in the formulation of composite flours to be used as ingredients in the food industry.

Contact angle of unset elastomeric impression materials.

Science.gov (United States)

Menees, Timothy S; Radhakrishnan, Rashmi; Ramp, Lance C; Burgess, John O; Lawson, Nathaniel C

2015-10-01

Some elastomeric impression materials are hydrophobic, and it is often necessary to take definitive impressions of teeth coated with some saliva. New hydrophilic materials have been developed. The purpose of this in vitro study was to compare contact angles of water and saliva on 7 unset elastomeric impression materials at 5 time points from the start of mixing. Two traditional polyvinyl siloxane (PVS) (Aquasil, Take 1), 2 modified PVS (Imprint 4, Panasil), a polyether (Impregum), and 2 hybrid (Identium, EXA'lence) materials were compared. Each material was flattened to 2 mm and a 5 μL drop of distilled water or saliva was dropped on the surface at 25 seconds (t0) after the start of mix. Contact angle measurements were made with a digital microscope at initial contact (t0), t1=2 seconds, t2=5 seconds, t3=50% working time, and t4=95% working time. Data were analyzed with a generalized linear mixed model analysis, and individual 1-way ANOVA and Tukey HSD post hoc tests (α=.05). For water, materials grouped into 3 categories at all time-points: the modified PVS and one hybrid material (Identium) produced the lowest contact angles, the polyether material was intermediate, and the traditional PVS materials and the other hybrid (EXA'lence) produced the highest contact angles. For saliva, Identium, Impregum, and Imprint 4 were in the group with the lowest contact angle at most time points. Modified PVS materials and one of the hybrid materials are more hydrophilic than traditional PVS materials when measured with water. Saliva behaves differently than water in contact angle measurement on unset impression material and produces a lower contact angle on polyether based materials. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Salt Content in Ready-to-Eat Food and Bottled Spring and Mineral Water Retailed in Novi Sad.

Science.gov (United States)

Paplović, Ljiljana B Trajković; Popović, Milka B; Bijelović, Sanja V; Velicki, Radmila S; Torović, Ljilja D

2015-01-01

Salt intake above 5 g/person/day is a strong independent risk factor for hypertension, stroke and cardiovascular diseases. Published studies indicate that the main source of salt in human diet is processed ready-to-eat food, contributing with 65-85% to daily salt intake. The aim of this paper was to present data on salt content of ready-to-eat food retailed in Novi Sad, Serbia, and contribution of the salt contained in 100 g of food to the recommended daily intake of salt for healthy and persons with cardiovascular disease (CVD) risk. In 1,069 samples of ready-to-eat food, salt (sodium chloride) content was calculated based on chloride ion determined by titrimetric method, while in 54 samples of bottled water sodium content was determined using flame-photometry. Food items in each food group were categorized as low, medium or high salt. Average salt content of each food group was expressed as a percentage of recommended daily intake for healthy and for persons with CVD risk. Average salt content (g/100 g) ranged from 0.36 ± 0.48 (breakfast cereals) to 2.32 ± 1.02 (grilled meat). The vast majority of the samples of sandwiches (91.7%), pizza (80.7%), salami (73.9%), sausages (72.9%), grilled meat (70.0%) and hard cheese (69.6%) had a high salt profile. Average amount of salt contained in 100 g of food participated with levels ranging from 7.2% (breakfast cereals) to 46.4% (grilled meat) and from 9.6% to 61.8% in the recommended daily intake for healthy adult and person with CVD risk, respectively. Average sodium content in 100 ml of bottled spring and mineral water was 0.33 ± 0.30 mg and 33 ± 44 mg, respectively. Ready-to-eat food retailed in Novi Sad has high hidden salt content, which could be considered as an important contributor to relatively high salt consumption of its inhabitants.

Mineral content of hay harvested in Bavarian and Swiss horse farms. Predictive value of cutting time, number of cut, botanical composition, origin and fertilization.

Science.gov (United States)

Kienzle, E; Möllmann, F; Nater, S; Wanner, M; Wichert, B

2008-12-01

Hay samples from 29 horse farms in Southern Upper Bavaria and 31 horse farms in Switzerland were taken and analysed for minerals such as calcium, magnesium, phosphorus and potassium. The content of herbs and legumes in the hay was determined and the Weende analysis was performed. Comparison between Bavaria and Switzerland resulted in comparable calcium contents of approximately 4 g Ca/kg dry matter (DM) in grass hay. Hay with more than 10% of herbs and legumes found only in Switzerland showed higher Ca contents of >7 g Ca/kg DM in hay. The mineral contents of phosphorus and potassium were lower in hay from Switzerland (P: 1.8 +/- 0.7 g/kg DM, K: 15.4 +/- 5.1 g/kg DM) than from Bavaria (P: 3.8 +/- 0.6 g/kg DM, K: 20.0 +/- 6.0 DM), whereas the magnesium content of the hay showed no difference between the regions ( approximately 1.5 g Mg/kg DM). Very late first grass hay cuts showed low magnesium and calcium (<4 g/kg DM) contents. Further minerals in the hay for horses differed from those in dairy cattle in the same region. Fertilization showed only small effects on the mineral contents of the hay produced for horses. Therefore, in calculation of ration and production of supplements for horses, these differences should be taken into account.

Evaluation of Minerals Content of Drinking Water in Malaysia

Science.gov (United States)

Azlan, Azrina; Khoo, Hock Eng; Idris, Mohd Aizat; Ismail, Amin; Razman, Muhammad Rizal

2012-01-01

The drinking and mineral water samples obtained from different geographical locations had concentrations of the selected minerals lower than the standard limits, except for manganese, arsenic, and fluoride. The concentrations of manganese and arsenic in two mineral water samples were slightly higher than the standard international recommended limits. One mineral water sample had a fluoride concentration higher than the standard limits, whereas manganese was not detected in nine drinking and mineral water samples. Most of the selected minerals found in the tap water samples were below the international standard limits, except for iron and manganese. The concentrations of iron and manganese in the tap water samples were higher than the standard limits, which were obtained from one and three of the studied locations, respectively. The potable water obtained from various manufacturers and locations in Peninsular Malaysia is safe for consumption, as the minerals concentrations were below the standard limits prescribed by the Malaysian Food Regulations of 1985. The data obtained may also provide important information related to daily intake of these minerals from drinking water. PMID:22649292

Evaluation of Minerals Content of Drinking Water in Malaysia

Directory of Open Access Journals (Sweden)

Azrina Azlan

2012-01-01

Full Text Available The drinking and mineral water samples obtained from different geographical locations had concentrations of the selected minerals lower than the standard limits, except for manganese, arsenic, and fluoride. The concentrations of manganese and arsenic in two mineral water samples were slightly higher than the standard international recommended limits. One mineral water sample had a fluoride concentration higher than the standard limits, whereas manganese was not detected in nine drinking and mineral water samples. Most of the selected minerals found in the tap water samples were below the international standard limits, except for iron and manganese. The concentrations of iron and manganese in the tap water samples were higher than the standard limits, which were obtained from one and three of the studied locations, respectively. The potable water obtained from various manufacturers and locations in Peninsular Malaysia is safe for consumption, as the minerals concentrations were below the standard limits prescribed by the Malaysian Food Regulations of 1985. The data obtained may also provide important information related to daily intake of these minerals from drinking water.

Evaluation of minerals content of drinking water in Malaysia.

Science.gov (United States)

Azlan, Azrina; Khoo, Hock Eng; Idris, Mohd Aizat; Ismail, Amin; Razman, Muhammad Rizal

2012-01-01

The drinking and mineral water samples obtained from different geographical locations had concentrations of the selected minerals lower than the standard limits, except for manganese, arsenic, and fluoride. The concentrations of manganese and arsenic in two mineral water samples were slightly higher than the standard international recommended limits. One mineral water sample had a fluoride concentration higher than the standard limits, whereas manganese was not detected in nine drinking and mineral water samples. Most of the selected minerals found in the tap water samples were below the international standard limits, except for iron and manganese. The concentrations of iron and manganese in the tap water samples were higher than the standard limits, which were obtained from one and three of the studied locations, respectively. The potable water obtained from various manufacturers and locations in Peninsular Malaysia is safe for consumption, as the minerals concentrations were below the standard limits prescribed by the Malaysian Food Regulations of 1985. The data obtained may also provide important information related to daily intake of these minerals from drinking water.

A constrained maximization formulation to analyze deformation of fiber reinforced elastomeric actuators

Science.gov (United States)

Singh, Gaurav; Krishnan, Girish

2017-06-01

Fiber reinforced elastomeric enclosures (FREEs) are soft and smart pneumatic actuators that deform in a predetermined fashion upon inflation. This paper analyzes the deformation behavior of FREEs by formulating a simple calculus of variations problem that involves constrained maximization of the enclosed volume. The model accurately captures the deformed shape for FREEs with any general fiber angle orientation, and its relation with actuation pressure, material properties and applied load. First, the accuracy of the model is verified with existing literature and experiments for the popular McKibben pneumatic artificial muscle actuator with two equal and opposite families of helically wrapped fibers. Then, the model is used to predict and experimentally validate the deformation behavior of novel rotating-contracting FREEs, for which no prior literature exist. The generality of the model enables conceptualization of novel FREEs whose fiber orientations vary arbitrarily along the geometry. Furthermore, the model is deemed to be useful in the design synthesis of fiber reinforced elastomeric actuators for general axisymmetric desired motion and output force requirement.

Elastic properties of woven bone: effect of mineral content and collagen fibrils orientation.

Science.gov (United States)

García-Rodríguez, J; Martínez-Reina, J

2017-02-01

Woven bone is a type of tissue that forms mainly during fracture healing or fetal bone development. Its microstructure can be modeled as a composite with a matrix of mineral (hydroxyapatite) and inclusions of collagen fibrils with a more or less random orientation. In the present study, its elastic properties were estimated as a function of composition (degree of mineralization) and fibril orientation. A self-consistent homogenization scheme considering randomness of inclusions' orientation was used for this purpose. Lacuno-canalicular porosity in the form of periodically distributed void inclusions was also considered. Assuming collagen fibrils to be uniformly oriented in all directions led to an isotropic tissue with a Young's modulus [Formula: see text] GPa, which is of the same order of magnitude as that of woven bone in fracture calluses. By contrast, assuming fibrils to have a preferential orientation resulted in a Young's modulus in the preferential direction of 9-16 GPa depending on the mineral content of the tissue. These results are consistent with experimental evidence for woven bone in foetuses, where collagen fibrils are aligned to a certain extent.

Total antioxidant capacity, total phenolic content and mineral elements in the fruit peel of Myrciaria cauliflora

Directory of Open Access Journals (Sweden)

Clináscia Rodrigues Rocha Araújo

2013-12-01

Full Text Available The in vitro antioxidant capacity, total phenolic content and mineral elements of the fruit peel of Myrciaria cauliflora were investigated. The antioxidant capacity was analyzed by the diphenylpicrylhydrazyl (DPPH, 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid (ABTS, ferric reducing antioxidant power (FRAP and β-carotene methods. The assays based on the DPPH (EC50 = 3.18 g sample/g DPPH, ABTS•+ (1017 μmol Trolox/g sample, FRAP (1676 µM Fe2SO4/g sample and β-carotene/linoleic acid (70% of oxidation inhibition methods indicated a high antioxidant capacity of the fruit peel extract of the plant. The Folin-Denis method was more efficient in determining the total phenolic compound contents in the different solvents than the Folin-Ciocalteu one. Extractions made with 4:1 methanol-water, 4:1 ethanol-water, 3:2 ethanol-water and 3:2 acetone-water solutions using the Folin-Denis method exhibited high contents of phenolic compounds (18.95, 14.06, 12.93 and 11.99 mg GAE/g, respectively. Potassium was the major element found in the fruit peel, followed by phosphorus, calcium, magnesium and iron, in that order. As a result, the fruit peel of M. cauliflora can be considered as an important source of natural antioxidants and essential elements of easy access for the population and for application in the food industry.

Bone mineral content reduction in youth with surgical form of Schistosomiasis mansoni: factors involved in the pathogenesis

Directory of Open Access Journals (Sweden)

Brandt Carlos Teixeira

2001-01-01

Full Text Available Thirty two children and adolescents from 14 to 20 years of age, suffering from hepatosplenic schistosomiasis mansoni and bleeding esophageal varicose veins, were evaluated for bone mineral density (BMD, before undergoing medical and surgical treatment. The surgical protocol was splenectomy, autoimplantation of spleen tissue into a pouch of the major omentum and ligature of the left gastric vein. Follow up of these patients? ranges from one to ten years with a mean of five years. The BMD was measured at the lumbar spine (L2 - L4 through the dual energy absorptionmetry X-ray (DEXA, using a LUNAR DPX-L densitometer. The degree of Symmers´ fibrosis was assessed by semiautomatic hystomorphometry. In eleven patients, the serum magnesium was measured before an intravenous overload of this ion and subsequently after eight and twenty four hours. Urine was collected 24 hours before and 24 hours after the magnesium overload. Deficiency of magnesium was considered when the uptake of this ion was greater than 40%. There was a significant trend of association between the status of bone mineral content and the Symmers´ fibrosis degree (c² = 6.606 R = 0.01017. There was also a moderate agreement between the greater fibrosis densities ( > the mean percentage and bone mineral deficits. Although the normal bone mineral content was more found among the patients with better hepatic functional reserve, the results did not reach statistical significance. There was a marked magnesium retention (>95% in one patient who had severe osteoporosis and a slight depletion (<5% in another patient, who presented no bone mineral deficit. It was concluded that the patients included in this series, showed an important BMD deficit, specially among the females which has had a significant improvement after medical and surgical treatment. Bone mineral deficit was associated with the degree of Symmers´ fibrosis. Magnesium depletion was present in two out of eleven patients. It is

Local differences in mineral content in vertebral trabecular bone measured by dual-energy computed tomography

International Nuclear Information System (INIS)

Nepper-Rasmussen, J.; Mosekilde, L.; Aarhus Univ.

1989-01-01

Twelve lumbar vertebral bodies from cadavers were examined with dual-energy CT, to measure the calcium content in a big central region of interest (ROI). In each of five vertebrae the calcium content was also measured in six small ROI. After completed scanning, six small cylinders were drilled out from each vertebra, and the ash-density of each cylinder was measured. The dual-energy CT measurements correlated well with the ash-density. Both ash-density and dual-energy CT showed a significantly higher mineral content in the posterior part of the vertebrae than in the anterior part, and this difference might be responsible for problems encountered with the reproducibility of dual-energy CT. (orig.)

Natural mineral bottled waters available on the Polish market as a source of minerals for the consumers. Part 2: The intake of sodium and potassium.

Science.gov (United States)

Gątarska, Anna; Ciborska, Joanna; Tońska, Elżbieta

– England, equipped with a GLITE data station, with wavelengths of 589.0 nm and 766.5 nm, respectively. The obtained research results indicate a high differentiation of the content of both sodium and potassium in natural mineral waters available on the Polish market, particularly in medium- and highly-mineralized waters. The consumption of 1 liter of low-mineralized natural mineral water ensures recommendations concerning the amount of sodium intake only in a limited scope, while in case of products of medium and high level of mineralization, it is much diversified. On the other hand, potassium supply with one liter of natural mineral water may ensure no more than several percent of the recommended daily intake of this component. The high diversification of sodium content in natural mineral waters available on the Polish market should encourage the analysis of their composition to avoid health disorders in a given group of consumers. The natural mineral waters examined in the study, at the assumed volume of their daily consumption, are not a good source of potassium for the population groups under analysis.

Follow-up of bone mineral contents by single and dual photon absorptiometry

International Nuclear Information System (INIS)

Krasznai, Istvan; Lakatos, Peter; Horvath, Csaba; Hollo, Istvan

1988-01-01

Quality control, performance and long-range reproducibility of SPA and DPA techniques were tested in model experiments. The relative minimum detectable change in bone mineral content, determined with appropriately checked and calibrated instrument amounts to 2.5-3.0 percent by SPA and 4.0-6.0 percent by DPA. To achieve this potential at least two parallel measurements are needed but in case of long-range measurements following-up measurements have to be repeated at least quarterly. DPA requires the same person to evaluate. (author) 6 refs.; 5 tabs

Content of 226Ra in tap and mineral waters of the Republic of Croatia and possible health effects

International Nuclear Information System (INIS)

Marovic, G.; Sencar, J.

1996-01-01

The paper describes the study of the content of 222 Ra in drinking water of Croatia: tap water from the public supply system of several major urban centres and bottled mineral water from two mineral water springs. 222 Ra was determined by alpha-spectrometric measurement after radiochemical separation. The study showed that 222 Ra concentrations for investigated categories of waters are below the levels at which any unacceptable dose due to ingestion would arise. (author)

Health Effects Due to Radionuclides Content of Solid Minerals within Port of Richards Bay, South Africa

Directory of Open Access Journals (Sweden)

Felix B. Masok

2016-11-01

Full Text Available This study assessed the radiological health hazards to various body organs of workers working within Transnet Precinct in Richards Bay in Kwazulu-Natal, South Africa due to radionuclide content of mineral ores often stored within the facility. Thirty samples were collected from five mineral ores (rock phosphate, rutile, zircon, coal and hematite and analyzed for 238U, 234U, 226Ra, 210Pb, 235U, 232Th, 228Ra, 228Th and 40K using delayed neutron activation analysis and low energy gamma spectroscopy. Rutile was found to be the most radioactive mineral ore within the facility with 210Pb concentration of 759.00 ± 106.00 Bq·kg−1. Effective annual dose rate in (mSv·y−1 delivered to different organs of the body: testes, bone marrow, whole body, lungs and ovaries from mineral ores were such that dose from mineral ores decreased in the order coal > rutile > rock phosphate > hematite > zircon. The organs with the highest received dose rate were the testes and this received dose was from coal. However, all of the calculated absorbed dose rates to organs of the body were below the maximum permissible safety limits.

Dietary boron does not affect tooth strength, micro-hardness, and density, but affects tooth mineral composition and alveolar bone mineral density in rabbits fed a high-energy diet.

Science.gov (United States)

Hakki, Sema S; SiddikMalkoc; Dundar, Niyazi; Kayis, Seyit Ali; Hakki, Erdogan E; Hamurcu, Mehmet; Baspinar, Nuri; Basoglu, Abdullah; Nielsen, Forrest H; Götz, Werner

2015-01-01

The objective of this study was to determine whether dietary boron (B) affects the strength, density and mineral composition of teeth and mineral density of alveolar bone in rabbits with apparent obesity induced by a high-energy diet. Sixty female, 8-month-old, New Zealand rabbits were randomly assigned for 7 months into five groups as follows: (1) control 1, fed alfalfa hay only (5.91 MJ/kg and 57.5 mg B/kg); (2) control 2, high energy diet (11.76 MJ and 3.88 mg B/kg); (3) B10, high energy diet + 10 mg B gavage/kg body weight/96 h; (4) B30, high energy diet + 30 mg B gavage/kg body weight/96 h; (5) B50, high energy diet + 50 mg B gavage/kg body weight/96 h. Maxillary incisor teeth of the rabbits were evaluated for compression strength, mineral composition, and micro-hardness. Enamel, dentin, cementum and pulp tissue were examined histologically. Mineral densities of the incisor teeth and surrounding alveolar bone were determined by using micro-CT. When compared to controls, the different boron treatments did not significantly affect compression strength, and micro-hardness of the teeth, although the B content of teeth increased in a dose-dependent manner. Compared to control 1, B50 teeth had decreased phosphorus (P) concentrations. Histological examination revealed that teeth structure (shape and thickness of the enamel, dentin, cementum and pulp) was similar in the B-treated and control rabbits. Micro CT evaluation revealed greater alveolar bone mineral density in B10 and B30 groups than in controls. Alveolar bone density of the B50 group was not different than the controls. Although the B treatments did not affect teeth structure, strength, mineral density and micro-hardness, increasing B intake altered the mineral composition of teeth, and, in moderate amounts, had beneficial effects on surrounding alveolar bone.

Osteoporotic-like effects of cadmium on bone mineral density and content in aged ovariectomized beagles

International Nuclear Information System (INIS)

Sacco-Gibson, N.; Abrams, J.; Chaudhry, S.; Hurst, D.; Peterson, D.; Bhattacharyya, M.

1992-01-01

Our purpose was to evaluate the effects of ovariectomy in conjunction with cadmium (Cd) exposure on bone. Aged female beagles with 45 Ca-labeled skeletons ovariectomized and exposed to Cd. Successive vertebral scans by dual photon absorptiometry monitored changes in bone mineral density (BMD) in each dog with time. Results showed that ovariectomy or Cd exposure alone caused significant decreases in BMD; ovariectomy with Cd exposure caused the greatest decrease. Ovariectomy alone did not decrease BMD in the distal end or mid-shaft of the tibia while BMD of the distal tibia decreased significantly due to Cd exposure alone. Combination treatment resulted in significant decreases in BMD of both tibial regions. At necropsy, tibiae, humeri, lumbar vertebrae and ribs were obtained for biochemical analysis. No group-to-group differences in bone weights (wet, dry, ash), in ash/dry ratios, or in long bone and vertebral Ca/dry or Ca/ash ratios were observed. Significantly higher total 45 Ca content and 45 Ca/dry and 45 Ca/ash ratios were observed in long bones and vertebrae of OV- and OV+ groups. In contrast, intact ribs showed significantly decreased Ca/dry and Ca/ash ratios compared to the SO-group. Quartered ribs demonstrated regional responses to specific treatment; decreases in total Ca content were greatest in the mid-rib region (-36 to -46%). Results suggest that in the aged female beagle, bone mineral loss associated with estrogen depletion is not only related to bone type (trabecular versus cortical) but also to bone Ca pools. Our results also suggest that a regional heterogeneity of bone plays a role in responsiveness to ovariectomy and Cd exposure. These aspects suggest that Cd is an exogenous factor affecting bone mineral loss independently of estrogen depletion. However, estrogen depletion primes bone for responsiveness to Cd-induced bone mineral loss

Osteoporotic-like effects of cadmium on bone mineral density and content in aged ovariectomized beagles

Energy Technology Data Exchange (ETDEWEB)

Sacco-Gibson, N.; Abrams, J.; Chaudhry, S.; Hurst, D.; Peterson, D.; Bhattacharyya, M.

1992-12-31

Our purpose was to evaluate the effects of ovariectomy in conjunction with cadmium (Cd) exposure on bone. Aged female beagles with {sup 45}Ca-labeled skeletons ovariectomized and exposed to Cd. Successive vertebral scans by dual photon absorptiometry monitored changes in bone mineral density (BMD) in each dog with time. Results showed that ovariectomy or Cd exposure alone caused significant decreases in BMD; ovariectomy with Cd exposure caused the greatest decrease. Ovariectomy alone did not decrease BMD in the distal end or mid-shaft of the tibia while BMD of the distal tibia decreased significantly due to Cd exposure alone. Combination treatment resulted in significant decreases in BMD of both tibial regions. At necropsy, tibiae, humeri, lumbar vertebrae and ribs were obtained for biochemical analysis. No group-to-group differences in bone weights (wet, dry, ash), in ash/dry ratios, or in long bone and vertebral Ca/dry or Ca/ash ratios were observed. Significantly higher total {sup 45}Ca content and {sup 45}Ca/dry and {sup 45}Ca/ash ratios were observed in long bones and vertebrae of OV- and OV+ groups. In contrast, intact ribs showed significantly decreased Ca/dry and Ca/ash ratios compared to the SO-group. Quartered ribs demonstrated regional responses to specific treatment; decreases in total Ca content were greatest in the mid-rib region ({minus}36 to {minus}46%). Results suggest that in the aged female beagle, bone mineral loss associated with estrogen depletion is not only related to bone type (trabecular versus cortical) but also to bone Ca pools. Our results also suggest that a regional heterogeneity of bone plays a role in responsiveness to ovariectomy and Cd exposure. These aspects suggest that Cd is an exogenous factor affecting bone mineral loss independently of estrogen depletion. However, estrogen depletion primes bone for responsiveness to Cd-induced bone mineral loss.

Influence of somatic cell count on mineral content and salt equilibria of milk

Directory of Open Access Journals (Sweden)

Primo Mariani

2010-01-01

Full Text Available Aim of this research was to study the effect of somatic cell count on mineral content and salt equilibria at the level of quarter milk samples. Ten Italian Friesian cows, in which two homologous quarters (front quarters in 1 cow, rear quarters in 6 cows and both rear and front quarters in 3 cows were characterised by a milk SCC400,000 cells/mL (HC-milk, respectively, were selected. Cows were milked at quarter level during the morning milking and a single sample was collected from each selected quarter, thus, 26 quarter milk samples were collected. Compared to LC-milk, HC-milk was characterised by a lower content of phosphorus and potassium and by a higher content of both sodium and chloride. The equilibrium of calcium, phosphorus and magnesium between the colloidal and soluble phase of milk and the mineralisation degree of the casein micelles, were not different between HC and LC milk.

Mineral supplementation for grazing ruminants

International Nuclear Information System (INIS)

McDowell, L.R.; Conrad, J.H.; Ellis, G.L.

1986-01-01

Grazing ruminants to which concentrate feeds cannot be economically fed must rely on self-feeding of mineral supplements. A number of factors affect mineral consumption of free-choice mixtures. Livestock exhibit little nutritional wisdom and will select palatable mixtures in preference to mixtures designed to meet their requirements. Palatability and appetite stimulators are often used to achieve a more uniform herd-wide consumption. It is best to formulate free-choice mixtures on the basis of analyses or other available data. However, when no information on mineral status is known, a free-choice complete mineral supplement is warranted. A 'complete' mineral mixture usually includes salt, a low fluoride P source, Ca, Co, Cu, I, Mn and Zn. Selenium, Mg, K, S, Fe or additional elements can be incorporated into a mineral supplement as new information suggests a need. The detriment to ruminant production caused by providing Ca, Se and Cu in excess can be greater than any benefit derived by providing a mineral supplement. In regions where high forage Mo predominates, three to five times the Cu content in mineral mixtures is needed to counteract Mo toxicity. Supplemental minerals are most critical during the wet season, when cattle are gaining weight rapidly and energy and protein supplies are adequate. Economic return on mineral supplementation is high. (author)

The influence of birth weight and length on bone mineral density and content in adolescence: The Tromsø Study, Fit Futures.

Science.gov (United States)

Christoffersen, Tore; Ahmed, Luai A; Daltveit, Anne Kjersti; Dennison, Elaine M; Evensen, Elin K; Furberg, Anne-Sofie; Gracia-Marco, Luis; Grimnes, Guri; Nilsen, Ole-Andreas; Schei, Berit; Tell, Grethe S; Vlachopoulos, Dimitris; Winther, Anne; Emaus, Nina

2017-12-01

The influence of birth weight and length on bone mineral parameters in adolescence is unclear. We found a positive association between birth size and bone mineral content, attenuated by lifestyle factors. This highlights the impact of environmental stimuli and lifestyle during growth. The influence of birth weight and length on bone mineral density and content later in life is unclear, especially in adolescence. This study evaluated the impact of birth weight and length on bone mineral density and content among adolescents. We included 961 participants from the population-based Fit Futures study (2010-2011). Dual-energy X-ray absorptiometry (DXA) was used to measure bone mineral density (BMD) and bone mineral content (BMC) at femoral neck (FN), total hip (TH) and total body (TB). BMD and BMC measures were linked with birth weight and length ascertained from the Medical Birth Registry of Norway. Linear regression models were used to investigate the influence of birth parameters on BMD and BMC. Birth weight was positively associated with BMD-TB and BMC at all sites among girls; standardized β coefficients [95% CI] were 0.11 [0.01, 0.20] for BMD-TB and 0.15 [0.06, 0.24], 0.18 [0.09, 0.28] and 0.29 [0.20, 0.38] for BMC-FN, TH and TB, respectively. In boys, birth weight was positively associated with BMC at all sites with estimates of 0.10 [0.01, 0.19], 0.12 [0.03, 0.21] and 0.15 [0.07, 0.24] for FN, TH and TB, respectively. Corresponding analyses using birth length as exposure gave significantly positive associations with BMC at all sites in both sexes. The significant positive association between birth weight and BMC-TB in girls, and birth length and BMC-TB in boys remained after multivariable adjustment. We found a positive association between birth size and BMC in adolescence. However, this association was attenuated after adjustment for weight, height and physical activity during adolescence.

Effects of mineral content on the fracture properties of equine cortical bone in double-notched beams.

Science.gov (United States)

McCormack, Jordan; Stover, Susan M; Gibeling, Jeffery C; Fyhrie, David P

2012-06-01

We recently developed a method to measure cortical bone fracture initiation toughness using a double-notched beam in four-point bending. This method was used to test the hypothesis that mineralization around the two notch roots is correlated with fracture toughness and crack extension (physical damage). Total energy absorbed to failure negatively correlated with average mineralization of the beam (r(2)=0.62), but not with notch root mineralization. Fracture initiation toughness was positively correlated to mineralization at the broken notch root (r(2)=0.34). Crack length extension at the unbroken notch was strongly negatively correlated with the average mineralization of the notch roots (r(2)=0.81) whereas crack length extension at the broken notch did not correlate with any of the mineralization measurements. Mineralization at the notch roots and the average mineralization contributed independently to the mechanical and damage properties. The data are consistent with a hypothesis that a) high notch root mineralization results in less stable crack length extension but high force to initiate unstable crack propagation while b) higher average mineralization leads to low post-yield (and total) energy absorption to failure. Copyright © 2012 Elsevier Inc. All rights reserved.

Manganese Supplementation in Deer under Balanced Diet Increases Impact Energy and Contents in Minerals of Antler Bone Tissue.

Directory of Open Access Journals (Sweden)

Jamil Cappelli

Full Text Available Bone ash, collagen, Ca and P composition, are considered the main factors affecting mechanical properties in bones. However, a series of studies in bone and antler have shown that some trace minerals, such as manganese, may play a role whose importance exceeds what may be expected considering their low content. A previous study showed that a reduction in manganese in antlers during a year of late winter frosts led to generalized antler breakage in Spain, which included a reduction of 30% of cortical thickness, 27% reduction in impact energy, and 10% reduction in work to peak force. Starting for this observation, we experimentally studied the effects of manganese supplementation in adults and yearling (yearlings red deer under a balanced diet. Subjects were 29 deer of different age classes (adult n = 19, yearlings n = 10 that were divided in a manganese injected group (n = 14 and a control group (n = 15. Antler content in ashes and minerals, intrinsic mechanical properties and cross section structure were examined at 4 points along the antler beam. A one way ANOVA (mean per antler showed that in yearlings, manganese supplementation only increased its content and that of Fe. However, in adults, Mn supplementation increased the mean content per antler of Ca, Na, P, B, Co, Cu, K, Mn, Ni, Se (while Si content was reduced, and impact work but not Young's modulus of elasticity, bending strength or work to peak force. A GLM series on characteristics in the uppermost part examined in the antler, often showing physiological exhaustion and depletion of body stores, showed also a 16% increase in work to peak force in the antlers of the treated group. Thus, manganese supplementation altered mineral composition of antler and improved structure and some mechanical properties despite animals having a balanced diet.

Manganese Supplementation in Deer under Balanced Diet Increases Impact Energy and Contents in Minerals of Antler Bone Tissue.

Science.gov (United States)

Cappelli, Jamil; Garcia, Andrés; Ceacero, Francisco; Gomez, Santiago; Luna, Salvador; Gallego, Laureano; Gambin, Pablo; Landete-Castillejos, Tomás

2015-01-01

Bone ash, collagen, Ca and P composition, are considered the main factors affecting mechanical properties in bones. However, a series of studies in bone and antler have shown that some trace minerals, such as manganese, may play a role whose importance exceeds what may be expected considering their low content. A previous study showed that a reduction in manganese in antlers during a year of late winter frosts led to generalized antler breakage in Spain, which included a reduction of 30% of cortical thickness, 27% reduction in impact energy, and 10% reduction in work to peak force. Starting for this observation, we experimentally studied the effects of manganese supplementation in adults and yearling (yearlings) red deer under a balanced diet. Subjects were 29 deer of different age classes (adult n = 19, yearlings n = 10) that were divided in a manganese injected group (n = 14) and a control group (n = 15). Antler content in ashes and minerals, intrinsic mechanical properties and cross section structure were examined at 4 points along the antler beam. A one way ANOVA (mean per antler) showed that in yearlings, manganese supplementation only increased its content and that of Fe. However, in adults, Mn supplementation increased the mean content per antler of Ca, Na, P, B, Co, Cu, K, Mn, Ni, Se (while Si content was reduced), and impact work but not Young's modulus of elasticity, bending strength or work to peak force. A GLM series on characteristics in the uppermost part examined in the antler, often showing physiological exhaustion and depletion of body stores, showed also a 16% increase in work to peak force in the antlers of the treated group. Thus, manganese supplementation altered mineral composition of antler and improved structure and some mechanical properties despite animals having a balanced diet.

Utilizing stretch-tunable thermochromic elastomeric opal films as novel reversible switchable photonic materials.

Science.gov (United States)

Schäfer, Christian G; Lederle, Christina; Zentel, Kristina; Stühn, Bernd; Gallei, Markus

2014-11-01

In this work, the preparation of highly thermoresponsive and fully reversible stretch-tunable elastomeric opal films featuring switchable structural colors is reported. Novel particle architectures based on poly(diethylene glycol methylether methacrylate-co-ethyl acrylate) (PDEGMEMA-co-PEA) as shell polymer are synthesized via seeded and stepwise emulsion polymerization protocols. The use of DEGMEMA as comonomer and herein established synthetic strategies leads to monodisperse soft shell particles, which can be directly processed to opal films by using the feasible melt-shear organization technique. Subsequent UV crosslinking strategies open access to mechanically stable and homogeneous elastomeric opal films. The structural colors of the opal films feature mechano- and thermoresponsiveness, which is found to be fully reversible. Optical characterization shows that the combination of both stimuli provokes a photonic bandgap shift of more than 50 nm from 560 nm in the stretched state to 611 nm in the fully swollen state. In addition, versatile colorful patterns onto the colloidal crystal structure are produced by spatial UV-induced crosslinking by using a photomask. This facile approach enables the generation of spatially cross-linked switchable opal films with fascinating optical properties. Herein described strategies for the preparation of PDEGMEMA-containing colloidal architectures, application of the melt-shear ordering technique, and patterned crosslinking of the final opal films open access to novel stimuli-responsive colloidal crystal films, which are expected to be promising materials in the field of security and sensing applications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The influence of filtration process on the content of minerals in the functional beverage of adaptogenic action

Directory of Open Access Journals (Sweden)

A. R. Khasanov

2018-01-01

Full Text Available The market of functional nutrition in Russia has been analyzed. The level of diseases associated with the nervous system and brain is actively growing in Russian Federation. World Health Organization (WHO predicted, brain diseases and mental disorders will enter the five diseases leading to disability in 2020 year. The market of non-alcoholic and functional beverages (FB, which can help for solving this health’s problem, is negligible. A functional bevarage with adaptogenic action based on fruit and berry raw materials and dry plant extracts for the prevention of brain diseases, in particular, the limbic system, as well as the nervous system, has been developed. The functional beveragewas examined in scientific work for the content of macro elements and trace elements. The filtration process is necessary to improve the microbiological stability of FB of adaptogenic action and consumer properties. During the experiment, the effects of the filtration process (one of the most important technological process on the content of mineral elements were studied. As the most appropriate and rational type of filtration for the drink, microfiltration was chosen.The filters were selected in accordance with the regimes and requirements characteristic of microfiltration process. The content of macro elements and trace elements was determined by atomic absorption spectroscopy using flame atomization on a Shimadzu AA 6300 spectrophotometer, (Japan. The values of the concentration of mineral substances in the functional beverage were compared before and after the microfiltration process. According to the results of measurements, the content of potassium remained unchanged and the content of copper and iron fell by 19.5 and 79.6 percent, respectively. Reducing the concentrations of magnesium, calcium, sodium and manganese are included in the measurement error intervals. The results obtained make it possible to analyze the losses of mineral substances and

Increased Leg Bone Mineral Density and Content During the Initial Years of College Sport.

Science.gov (United States)

Scerpella, John J; Buehring, Bjoern; Hetzel, Scott J; Heiderscheit, Bryan C

2018-04-01

Scerpella, JJ, Buehring, B, Hetzel, SJ, and Heiderscheit, BC. Increased leg bone mineral density and content during the initial years of college sport. J Strength Cond Res 32(4): 1123-1130, 2018-Bone mineral density (BMD) and bone mineral content (BMC) data are useful parameters for evaluating how training practices promote bone health. We used dual-energy X-ray absorptiometry (DXA) to longitudinally assess sport-specific growth in leg and total body BMD/BMC over the initial 2 years of collegiate training. Eighty-five Division 1 collegiate basketball, hockey, and soccer athletes (50 males and 35 females; age 19.0 [0.8] years) underwent annual DXA scans. Leg and total body BMD/BMC were compared within and across two 1-year intervals (periods 1 and 2) using repeated-measures analysis of variance, adjusting for age, sex, race, and sport. Leg BMD, leg BMC, and total body BMC all increased over period 1 (0.05 g·cm [p = 0.001], 0.07 kg [p = 0.002], and 0.19 kg [p BMC (p BMC (p = 0.005). Leg lean mass increased more during period 2 than period 1 (p = 0.018). Sports participation was the only significant predictor of change in leg BMD. Significant increases in both leg BMD and BMC were demonstrated over both 2-year periods, with greater gains during period 1. These gains highlight the importance of attentive training procedures, capitalizing on attendant physical benefits of increased BMD/BMC. Additional research in young adults, evaluating bone mass acquisition, will optimize performance and decrease risk of bone stress injury among collegiate athletes.

Conteúdo de minerais dos ingredientes e da multimistura Mineral content of ingredients and multimixture

Directory of Open Access Journals (Sweden)

Celma de Oliveira Barbosa

2006-12-01

Full Text Available Os objetivos deste estudo foram determinar o conteúdo de minerais dos ingredientes e da multimistura, produzida e comercializada em Teresina-PI e avaliar a composição mineral da multimistura, relacionando-a com a ingestão diária recomendada (IDR. As amostras estudadas foram multimistura, pó da folha de macaxeira, farelo de arroz, farelo de trigo, farinha de trigo e fubá de milho. Os minerais Ca, Cu, K, Mn, Zn, Fe, Mg, Na e P foram determinados usando a técnica de espectrometria de emissão atômica com fonte de plasma indutivamente acoplado (ICP OES. A análise estatística dos dados foi realizada por meio de médias e desvios padrão. As amostras apresentaram baixos teores para a maioria dos minerais analisados, com exceção dos ingredientes farelo de trigo e farinha de trigo. Em especial, observou-se que a multimistura não atingiu o mínimo necessário de 25% do valor diário (VD, para ser considerada complemento nutricional pelo Ministério da Saúde, para os minerais analisados, com exceção do Mn e Mg. Concluiu-se que não existe uma padronização nas quantidades dos ingredientes no preparo da multimistura e que os teores dos minerais não atendem às recomendações diárias necessárias para crianças.The objectives of this study were to determine the mineral content of ingredients and multimixture produced and commercialized in Teresina-PI/Brazil and evaluate the mineral composition in relation to the dietary reference intakes (DRI. The studied samples were multimixture, cassava leaf powder, rice bran, wheat bran, wheat flour and corn flour. The minerals Ca, Cu, K, Mn, Zn, Fe, Mg, Na and P were determined using the atomic emission spectrometry (ICP OES. The statistics analysis of the data was carried out by mean and standard deviations. The samples had low levels in most of the analyzed minerals, except for wheat bran and wheat flour. In particular, it was observed that the multimixture did not reach the minimum of 25% of the

Elastically stretchable thin film conductors on an elastomeric substrate

Science.gov (United States)

Jones Harris, Joyelle Elizabeth

Imagine a large, flat screen television that can be rolled into a small cylinder after purchase in the store and then unrolled and mounted onto the wall of a home. The electronic devices within the television must be able to withstand large deformation and tensile strain. Consider a robot that is covered with an electronic skin that simulates human skin. The skin would enable the machine to lift an elderly person with care and sensitivity. The skin will endure repeated deformation with the highest tensile strains being experienced at the robot's joints. These applications and many others will benefit from stretchable electronic circuitry. While several different methods have been employed to create stretchable electronics, all methods use a common tool -- stretchable conductors. Therefore, the goal of this thesis work was to fabricate elastically stretchable conductors that can be used in stretchable electronics. We deposited Au thin films on an elastomeric substrate, and the resulting conductors remained electrically continuous when stretched by 30% and more. We developed photolithographic processes that can be used to pattern elastically stretchable conductors with a 10 mum resolution. We fabricated bi-level stretchable conductors that are separated by an elastomeric insulator and are electrically connected through via holes in the insulator. We applied our bi-level conductors to create a stretchable resistor-inductor-capacitor (RLC) circuit with a tunable resonant frequency. We also used stretchable conductors to measure action potentials in biological samples. This thesis describes the fabrication and application of our elastically stretchable conductors.

Linear dimensional stability of elastomeric impression materials over time.

Science.gov (United States)

Garrofé, Analía B; Ferrari, Beatriz A; Picca, Mariana; Kaplan, Andrea E

2011-01-01

The purpose of this study was to evaluate the linear dimensional stability of different elastomeric impression materials over time. A metal mold was designed with its custom trays, which were made of thermoplastic sheets (Sabilex sheets 0.125 mm thick). Three impressions were taken of it with each of the following: the polyvinylsiloxane Examix-GC-(AdEx), Aquasil-Dentsply-(AdAq) and Panasil-Kettenbach-(AdPa), and the polydimethylsiloxane Densell-Dental Medrano-(CoDe), Speedex-Coltene-(CoSp) and Lastic-Kettenbach-(CoLa). All impressions were taken with putty and light-body materials using a one-step technique. Standardized digital photographs were taken at different time intervals (0, 15, 30, 60, 120 minutes; 24 hours; 7 and 14 days), using an "ad-hoc" device, and analyzed using software (Image Tool) by measuring the distance between lines previously made at the top of the mold. The results were analyzed by ANOVA for repeated measures. The initial and final values for mean and SD were: AdEx: 1.32 (0.01) and 1.31 (0.00); AdAq: 1.32 (0.00) and 1.32 (0.00), AdPa: 1.327 (0.006) and 1.31 (0.00); CoDe: 1.32 (0.00) and 1.32 (0.01); CoSp: 1.327 (0.006) and 1.31 (0.00), CoLa: 1.327 (0.006) and 1.303 (0.006). Statistical evaluation showed that both material and time have significant effects. Under the conditions in this study we conclude that time would significantly affect the lineal dimensional stability of elastomeric impression materials.

Bone mineral density and content during weight cycling in female rats: effects of dietary amylase-resistant starch

Directory of Open Access Journals (Sweden)

Jagpal Sugeet

2008-11-01

Full Text Available Abstract Background Although there is considerable evidence for a loss of bone mass with weight loss, the few human studies on the relationship between weight cycling and bone mass or density have differing results. Further, very few studies assessed the role of dietary composition on bone mass during weight cycling. The primary objective of this study was to determine if a diet high in amylase-resistant starch (RS2, which has been shown to increase absorption and balance of dietary minerals, can prevent or reduce loss of bone mass during weight cycling. Methods Female Sprague-Dawley (SD rats (n = 84, age = 20 weeks were randomly assigned to one of 6 treatment groups with 14 rats per group using a 2 × 3 experimental design with 2 diets and 3 weight cycling protocols. Rats were fed calcium-deficient diets without RS2 (controls or diets high in RS2 (18% by weight throughout the 21-week study. The weight cycling protocols were weight maintenance/gain with no weight cycling, 1 round of weight cycling, or 2 rounds of weight cycling. After the rats were euthanized bone mineral density (BMD and bone mineral content (BMC of femur were measured by dual energy X-ray absorptiometry, and concentrations of calcium, copper, iron, magnesium, manganese, and zinc in femur and lumbar vertebrae were determined by atomic absorption spectrophotometry. Results Rats undergoing weight cycling had lower femur BMC (p 2 had higher femur BMD (p 2-fed rats also had higher femur calcium (p Conclusion Weight cycling reduces bone mass. A diet high in RS2 can minimize loss of bone mass during weight cycling and may increase bone mass in the absence of weight cycling.

Contribution of nitrogen derived from mineral supplementation for soybean seedlings

Directory of Open Access Journals (Sweden)

Gerusa Massuquini Conceição

Full Text Available ABSTRACT Seeds can absorb N from mineral supplementation, thus stimulating seedling development in soybeans (Glycine max (L. Merrill. This study aimed to evaluate the contribution to soybean seedlings of N derived from mineral supplementation in seeds with different nutritional contents. Seeds of the cultivar BMX Potência RR received mineral supplementation enriched with 2.5% excess 15N. The treatments were performed in seeds in two lots, one with high and one with low nutritional content. At 2, 6 and 10 days after sowing on paper towels, the seedlings were collected and separated into cotyledons, roots and shoots. Dry matter production, root length and root volume were assessed. Total N and 15N values were analyzed in the seedling organ tissues. The seeds from the lot with lower nutritional content absorbed more N from the mineral supplement, which was accumulated in the cotyledons and redistributed to the root systems and cotyledons. At 10 days after sowing, most of the N in the organs of soybean seedlings was derived from the seed reserves, regardless of nutritional content. Thus, application of N through mineral supplementation is of low importance for the development and nutrition of seedlings.

[Mineral waters from several Brazilian natural sources].

Science.gov (United States)

Rebelo, M A; Araujo, N C

1999-01-01

To divulge information on the chemical composition and physical-chemical features of some mineral waters from Brazilian natural sources that will be of useful protocol investigation and patient advice. The survey was based on bottle labels of non-gaseous mineral waters commercially available in the city of Rio de Janeiro. The íon concentration of each mineral was calculated from the salt content. 36 springs were enralled from different states of the country. The pH (25 degrees C), 4.1 to 9.3, varied on dependence of the source and it was linearey correlated with the cations calcium, magnesium and sodium and the anion bicarbonate. It was atributed to high alkalinity (about 70% of bicarbonate in the molecula-gram) of these salts. The calcium (0.3 to 42 mg/l), magnesium (0.0 to 18 mg/l) and bicarbonate (4 to 228 mg/l) contents are relatively low. The mineral content of the Brazilian springs enrolled in this survey is low; about 70% of the sources having calcium and magnesium less than 10 mg/l and 1.0 mg/l, respectively, similar to local tap water.

Diversity of activity participation determines bone mineral content in the lower limbs of pre-pubertal children with developmental coordination disorder.

Science.gov (United States)

Fong, S S M; Vackova, D; Choi, A W M; Cheng, Y T Y; Yam, T T T; Guo, X

2018-04-01

This study examined the relationships between activity participation and bone mineralization in children with developmental coordination disorder. Limited participation in physical, recreational, social, and skill-based and self-improvement activities contributed to lower bone mineral content. For improved bone health, these children should participate in a variety of activities, not only physical activities. Limited activity participation in children with developmental coordination disorder (DCD) may have a negative impact on bone mineral accrual. The objectives of this study were to compare bone mineralization and activity participation patterns of pre-pubertal children with DCD and those with typical development, and to determine the association between activity participation patterns and bone mineralization in children with DCD. Fifty-two children with DCD (mean age = 7.51 years) and 61 children with typical development (mean age = 7.22 years) participated in the study. Appendicular and total body (less head) bone mineral content (BMC) and bone mineral density (BMD) were evaluated by a whole-body dual-energy X-ray absorptiometry scan. Activity participation patterns were assessed using the Children's Assessment of Participation and Enjoyment (CAPE) questionnaire. Children with DCD had lower appendicular and total body BMCs and BMDs than children with typical development overall (p accounting for the effects of age, sex, height, lean mass, and fat mass, the total activity diversity score remained independently associated with leg BMC in children with DCD, explaining 5.1% of the variance (p = 0.030). However, the physical activity diversity score was no longer associated with leg BMC (p = 0.090). Diversity of activity participation and bone mineralization were lower in pre-pubertal children with DCD. Decreased total activity participation diversity was a contributing factor to lower BMC in the legs of children with DCD.

Proximate Composition, Mineral Content and Fatty Acids Analyses of Aromatic and Non-Aromatic Indian Rice

Directory of Open Access Journals (Sweden)

Deepak Kumar Verma

2017-01-01

Full Text Available Awareness on nutritive value and health benefits of rice is of vital importance in order to increase the consumption of rice in daily diet of the human beings. In this study, a total of six aromatic and two non-aromatic rice accessions grown in India were analysed for their nutritional quality attributes including proximate composition, mineral contents and fatty acids. Data with three replications were used to measure Pearson's simple correlation co-efficient in order to establish the relationship among various nutritional quality attributes. The result on proximate composition showed that Govind Bhog had the highest moisture (13.57% and fat (0.92% content, which signifies its tasty attribute. Badshah Bhog exhibited the highest fibre content (0.85%, carbohydrate content (82.70% and food energy (365.23 kCal per 100 g. Among the minerals, the higher Ca (98.75 mg/kg, Zn (17.00 mg/kg and Fe (31.50 mg/kg were in Gopal Bhog, whereas the highest Na (68.85 mg/kg was in Badshah Bhog, the highest K (500.00 mg/kg was in Swetganga, Khushboo and Sarbati. The highest contents of unsaturated fatty acids viz. oleic acid (49.14%, linoleic acid (46.99% and linolenic acid (1.27% were found in Sarbati, whereas the highest content of saturated fatty acids viz. myristic acid (4.60% and palmitic acid (31.91% were found in Govind Bhog and stearic acid (6.47% in Todal. The identified aromatic rice accessions Gopal Bhog, Govind Bhog and Badshah Bhog and non-aromatic rice accession Sarbati were found nutritionally superior among all eight tested accessions. The nutritional quality oriented attributes in this study were competent with recognized prominent aromatic and non-aromatic rice accessions as an index of their nutritional worth and recommend to farmers and consumers which may be graded as export quality rice with good unique nutritional values in international market.

The effect of a lidocaine/prilocaine topical anesthetic on pain and discomfort associated with orthodontic elastomeric separator placement

Directory of Open Access Journals (Sweden)

M. Abu Al-Melh

2017-01-01

Full Text Available Abstract Background The initial placement of orthodontic elastomeric separators can be uncomfortable and painful. Therefore, it is important to relieve this disturbing sensation to create a discomfort or pain-free orthodontic visit. The purpose of this study was to investigate the effect of a lidocaine/prilocaine topical anesthetic on pain and discomfort associated with the placement of orthodontic elastomeric separators. Methods Fifty subjects aging between 20–35 years were included in this study. In the maxillary arch, a lidocaine/prilocaine topical anesthetic was placed around the ginigval margins of the premolar and molar on side. On the other side, a placebo agent was placed around the ginigval margins of the premolar and molar. After two minutes, an elastomeric separator was placed between the premolar and molar on both sides. The subjects were then asked to report their findings on a Verbal Scale and a Visual Analogue Scale every second minute for a period of 10 min. The subjects were also given a questionnaire to evaluate the overall impression on the topical anesthetic use. Results The overall mean discomfort/pain score was found to be significantly lower (p < 0.001 with the topical anesthetic than with the placebo. Repeated measures ANOVA with a Greenhouse-Geisser correction determined that mean pain scores were statistically significantly low with the 10-min time duration (F (1.54,42.2 = 40.7, p = 0.001, with an estimated grand mean (8.37, 95% CI 6.75–9.98. The questionnaire responses revealed that 87% of the subjects reported an overall satisfaction and agreement with the topical anesthetic than with the placebo or no difference (13% after the initial separator placement. Conclusions The discomfort and pain resulting from the initial placement of orthodontic elastomeric separators can be significantly reduced with the lidocaine/prilocaine topical anesthetic.

Leaching of copper concentrates with high arsenic content in chlorine-chloride media

International Nuclear Information System (INIS)

Herreros, O.; Fuentes, G.; Quiroz, R.; Vinals, J.

2003-01-01

This work reports the results of copper concentrates leaching which have high arsenic concepts (up to 2.5%). The treatments were carried out using chlorine that forms from sodium hypochlorite and sulphuric acid. The aim of this work is to obtain a solution having high copper content 4 to 6 g/l and 5 to 7 g/l free acid in order to submit it directly to a solvent extraction stage. In addition, this solution should have minimum content of arsenic and chloride ions. To carry out this investigation, an acrylic reactor was constructed where the leaching tests were made at constant temperature in a thermostatic bath under atmospheric pressure. The concentrate samples were obtained from mineral processing plants from Antofagasta, Chile. Typical variables were studied, such as leaching agent concentration, leaching time, pulp density and temperature among others. Some of the residues were analyzed by XRD and EPS. On the other hand, the solutions were analyzed by Atomic Absorption Spectroscopy. The results indicate solutions having the contents stated above can be obtained. (Author) 19 refs

Influence of oil and mineral characteristics on oil-mineral interaction

International Nuclear Information System (INIS)

Wood, P.A.; Lunel, T.; Daniel, F.; Swannell, R.; Lee, K.; Stoffyn-Egli, P.

1998-01-01

A laboratory study was conducted to simulate the process of oil-mineral interaction in seawater. Thirteen different crudes, emulsions and oil products were used in the study. The objective was to improve the fundamental understanding of the characteristics of oils and minerals that influence the process. The findings of an initial phase of studies based on the swirling flask and marine simulation procedures were also described. Oil content associated with flocs to oil and mineral characteristics were discussed. Emulsions were prepared at 10 degrees C by vigorously mixing the oil with excess artificial seawater in a Kilner jar using a high shear homogenizer. Topped oils were prepared by distillation to 250 degrees C. The biodegraded oil was prepared from the topped crude oil. Biodegradation was achieved over a 28 day period using natural seawater and naturally occurring hydrocarbon degraders. The relationships between oil concentration, oil density and mineral exchange capacity were determined. The study showed that greater oil concentrations in the water column could be expected with (1) the presence of mineral fines, (2) minerals with greater cation exchange rates, (3) minerals with finer sizes, and (4) oils of lower viscosity and density. It was determined that in coastal waters the viscosity of the oil/emulsion will likely be the main factor affecting oil-mineral interactions. The viscosity limit for allowing oil fines interaction is likely to be dependent on the energy in the coastal zone affected by the oil pollution. 18 refs., 5 tabs., 13 figs

Metal ions released from fixed orthodontic appliance affect hair mineral content.

Science.gov (United States)

Mikulewicz, Marcin; Wołowiec, Paulina; Loster, Bartłomiej; Chojnacka, Katarzyna

2015-02-01

The objective was to evaluate metal ion accumulation in hair of patients undergoing orthodontic treatment with fixed appliances in time. The patients (N = 47) participated in a questionnaire survey. Hair sampling was performed at the beginning and in the 4th, 8th, and 12th month of the treatment. The content of metals (Cr, Ni, Fe) in hair was analyzed by ICP-OES equipped with USN nebulizer. The peak release of Cr and Fe occurred after 4 months of the treatment, and the peak release of Ni gradually increased throughout the whole year of the therapy. During 1 year treatment, an average accumulation of metals in hair tissue was 7.42 ± 14.19 μg of Ni, 8.94 ± 13.1 μg of Cr, and 131 ± 279 μg of Fe. The mean content of Cr was higher than the 90th percentile value for this element. The upper limit of literature reference ranges for Cr, Ni, and Fe in hair was not exceeded. The value of exposure (kinetics and dose) of orthodontic patients to metal ions released from orthodontic appliances can be assessed by hair mineral analysis. The content of Cr was statistically significantly higher during the treatment than before the beginning of therapy.

Grouping Minerals by Their Formulas

Science.gov (United States)

Mulvey, Bridget

2018-01-01

Minerals are commonly taught in ways that emphasize mineral identification for its own sake or maybe to help identify rocks. But how do minerals fit in with other science content taught? The author uses mineral formulas to help Earth science students wonder about the connection between elements, compounds, mixtures, minerals, and mineral formulas.…

Mineral composition of non-conventional leafy vegetables.

Science.gov (United States)

Barminas, J T; Charles, M; Emmanuel, D

1998-01-01

Six non-conventional leafy vegetables consumed largely by the rural populace of Nigeria were analyzed for mineral composition. Mineral contents appeared to be dependent on the type of vegetables. Amaranthus spinosus and Adansonia digitata leaves contained the highest level of iron (38.4 mg/100 g and 30.6 mg/100 g dw, respectively). These values are low compared to those for common Nigerian vegetables but higher than those for other food sources. All the vegetables contained high levels of calcium compared to common vegetables, thus they could be a rich source of this mineral. Microelement content of the leaves varied appreciably. Zinc content was highest in Moringa oleifera, Adansonia digitata and Cassia tora leaves (25.5 mg/100 g, 22.4 mg/100 g and 20.9 mg/100 g dw, respectively) while the manganese content was comparatively higher in Colocasia esculenta. The concentrations of the mineral elements in the vegetables per serving portion are presented and these values indicate that the local vegetables could be valuable and important contributors in the diets of the rural and urban people of Nigeria. The mean daily intake of P, Mg, Ca, Fe, Cu and Zn were lower than their recommended dietary allowances (RDAs). However, the manganese daily intake was found not to differ significantly (p = 0.05) from the RDA value.

Correlation between in vitro Elastomeric Force Degradation and Glass Transition Temperature determined by Dynamic Mechanical Analysis

Directory of Open Access Journals (Sweden)

Manu Krishnan

2012-01-01

Conclusion: Tg can be considered as a dependable parameter in envisaging the force properties of an elastomeric chain. Clinically, it suggested that a polymer with higher Tg can give higher or optimum levels of force for tooth movement.

Stability of penicillin G sodium diluted with 0.9% sodium chloride injection or 5% dextrose injection and stored in polyvinyl chloride bag containers and elastomeric pump containers.

Science.gov (United States)

Hossain, Mirza Akram; Friciu, Mihaela; Aubin, Sebastien; Leclair, Grégoire

2014-04-15

The stability of penicillin G sodium solutions stored in polyvinyl chloride (PVC) bags or elastomeric pump containers was studied. Test samples were prepared by diluting powdered penicillin G sodium (10 million units/10-mL vial) to solutions of 2,500 or 50,000 units/mL with 0.9% sodium chloride injection or 5% dextrose injection. The preparations were transferred to 250-mL PVC bags and elastomeric pump containers. All samples were prepared in triplicate and stored at 5°C. Chemical stability was measured by a stability-indicating high-performance liquid chromatographic (HPLC) assay and by pH evaluation. Particulate matter was evaluated according to compendial standards using a light-obscuration particle count test. Preparations were visually examined throughout the study. After 21 days of storage, all test samples remained chemically stable, with an HPLC assay recovery value of more than 90% of the initial value. After 28 days, all samples prepared with either diluent and stored in PVC bags, as well as the samples diluted to 2,500 units/mL with sodium chloride injection and stored in elastomeric pump containers, did not meet the recovery acceptance limit. For all test samples, the mean pH consistently decreased during storage, from about 6.4 to about 5.5. Particle counts remained acceptable throughout the study, and no change in appearance was observed. Penicillin G for injection (2,500 and 50,000 units/mL) diluted in 0.9% sodium chloride injection or 5% dextrose injection and stored at 5°C in PVC containers or elastomeric pump containers was physically and chemically stable for a period of at least 21 days.

Quantitative assessment of alkali-reactive aggregate mineral content through XRD using polished sections as a supplementary tool to RILEM AAR-1 (petrographic method)

International Nuclear Information System (INIS)

Castro, Nélia; Sorensen, Bjørn E.; Broekmans, Maarten A.T.M.

2012-01-01

The mineral content of 5 aggregate samples from 4 different countries, including reactive and non-reactive aggregate types, was assessed quantitatively by X-ray diffraction (XRD) using polished sections. Additionally, electron probe microanalyzer (EPMA) mapping and cathodoluminescence (CL) were used to characterize the opal-CT identified in one of the aggregate samples. Critical review of results from polished sections against traditionally powdered specimen has demonstrated that for fine-grained rocks without preferred orientation the assessment of mineral content by XRD using polished sections may represent an advantage over traditional powder specimens. Comparison of data on mineral content and silica speciation with expansion data from PARTNER project confirmed that the presence of opal-CT plays an important role in the reactivity of one of the studied aggregates. Used as a complementary tool to RILEM AAR-1, the methodology suggested in this paper has the potential to improve the strength of the petrographic method.

The effect of dietary pigmentation on the esthetic appearance of clear orthodontic elastomeric modules

Directory of Open Access Journals (Sweden)

Nabeel F Talic

2016-01-01

Conclusions: Coffee and tea are strong staining media that should be avoided by patients who opted to have esthetic appliances for their orthodontic treatment. Elastomeric modules manufactured by AU showed higher staining optical properties as compared to the other two companies, which could be related to the manufacturing processing of these modules.

A world of minerals in your mobile device

Science.gov (United States)

Jenness, Jane E.; Ober, Joyce A.; Wilkins, Aleeza M.; Gambogi, Joseph

2016-09-15

Mobile phones and other high-technology communications devices could not exist without mineral commodities. More than one-half of all components in a mobile device—including its electronics, display, battery, speakers, and more—are made from mined and semiprocessed materials (mineral commodities). Some mineral commodities can be recovered as byproducts during the production and processing of other commodities. As an example, bauxite is mined for its aluminum content, but gallium is recovered during the aluminum production process. The images show the ore minerals (sources) of some mineral commodities that are used to make components of a mobile device. On the reverse side, the map and table depict the major source countries producing these mineral commodities along with how these commodities are used in mobile devices. For more information on minerals, visit http://minerals.usgs.gov.

Abundances and distribution of minerals and elements in high-alumina coal fly ash from the Jungar Power Plant, Inner Mongolia, China

Science.gov (United States)

Dai, S.; Zhao, L.; Peng, S.; Chou, C.-L.; Wang, X.; Zhang, Y.; Li, D.; Sun, Y.

2010-01-01

The fly ash from the Jungar Power Plant, Inner Mongolia, China, is unique because it is highly enriched in alumina (Al2O3>50%). The fly ash mainly consists of amorphous glass and mullite and trace amounts of corundum, quartz, char, calcite, K-feldspar, clay minerals, and Fe-bearing minerals. The mullite content in fly ash is as high as 37.4% because of high boehmite and kaolinite contents in feed coal. Corundum is a characteristic mineral formed during the combustion of boehmite-rich coal.Samples from the economizer were sieved into six size fractions (500 mesh) and separated into magnetic, mullite+corundum+quartz (MCQ) and glass phases for mineralogical and chemical analysis. The corundum content increases but amorphous glass decreases with decreasing particle size. Fractions of small particle sizes are relatively high in mullite, probably because mullite was formed from fine clay mineral particles under high-temperature combustion condition. Similarly, fine corundum crystals formed in the boiler from boehmite in feed coal. The magnetic phase consists of hematite, magnetite, magnesioferrite, and MgFeAlO4 crystals. The MCQ phase is composed of 89% mullite, 6.1% corundum, 4.5% quartz, and 0.5% K-feldspar.Overall, the fly ash from the power plant is significantly enriched in Al2O3 with an average of 51.9%, but poor in SiO2, Fe2O3, CaO, MgO, Na2O, P2O5, and As. Arsenic, TiO2, Th, Al2O3, Bi, La, Ga, Ni, and V are high in mullite, and the magnetic matter is enriched in Fe2O3, CaO, MnO, TiO2, Cs, Co, As, Cd, Ba, Ni, Sb, MgO, Zn, and V. The remaining elements are high in the glass fraction. The concentration of K2O, Na2O, P2O5, Nb, Cr, Ta, U, W, Rb, and Ni do not clearly vary with particle size, while SiO2 and Hg decrease and the remaining elements clearly increase with decreasing particle size. ?? 2009 Elsevier B.V.

A Comparative Analysis of Nutrients and Mineral Elements Content ...

African Journals Online (AJOL)

(Mg), Iron (Fe), Copper (Cu) and Zinc (Zn) content, while P. pedicellatum has high ... INTRODUCTION ... central to animal production and productivity. .... for growth and serve as structural element in all plant ... the animal's body, it ensured correct maintenance of ... Ash content because Ash is the approximation of total.

Quantifying Rock Weakening Due to Decreasing Calcite Mineral Content by Numerical Simulations.

Science.gov (United States)

Wetzel, Maria; Kempka, Thomas; Kühn, Michael

2018-04-01

The quantification of changes in geomechanical properties due to chemical reactions is of paramount importance for geological subsurface utilisation, since mineral dissolution generally reduces rock stiffness. In the present study, the effective elastic moduli of two digital rock samples, the Fontainebleau and Bentheim sandstones, are numerically determined based on micro-CT images. Reduction in rock stiffness due to the dissolution of 10% calcite cement by volume out of the pore network is quantified for three synthetic spatial calcite distributions (coating, partial filling and random) using representative sub-cubes derived from the digital rock samples. Due to the reduced calcite content, bulk and shear moduli decrease by 34% and 38% in maximum, respectively. Total porosity is clearly the dominant parameter, while spatial calcite distribution has a minor impact, except for a randomly chosen cement distribution within the pore network. Moreover, applying an initial stiffness reduced by 47% for the calcite cement results only in a slightly weaker mechanical behaviour. Using the quantitative approach introduced here substantially improves the accuracy of predictions in elastic rock properties compared to general analytical methods, and further enables quantification of uncertainties related to spatial variations in porosity and mineral distribution.

Development of the in vivo measurement system of bone mineral content using monoenergetic gamma rays

International Nuclear Information System (INIS)

Nardocci, A.C.

1990-08-01

A system, developed for in vivo measurement of bone mineral content (BMC) using monoenergetic gamma-rays of 241 Am, is described. It presents a discussion of the theoretical and practical aspects of the technique, with details of acquisition and data processing and also discusses the calibration procedure used. The results obtained with in vivo measurements are presented and BMC values of clinically normal subjects and chronic renal patients are compared. (author)

Influence of inoculation with ascochyta lentis on mineral contents (Na, Ca, Mg, Cu, and Fe) of susceptible and resistant lines of lentil (Lens culinaris medik.)

International Nuclear Information System (INIS)

Sahi, S.T.; Ghazanfar, M.U.; Habib, A.; Wakil, W.

2010-01-01

An experiment was conducted to determine the mineral contents of the healthy and inoculated plant of lentil and their relationship toward the Ascochyta lentis disease. The results revealed that magnesium, copper and zinc contents of un-inoculated lentil lines, included in susceptible group were higher than those included in resistant group whereas, sodium, calcium and iron contents were more in the resistant as compared to the susceptible group. Upon inoculation with Ascochyta lentis, the cause of lentil blight disease, sodium, calcium, zinc, copper and iron contents increased invariably in both the susceptible and resistant groups of lentil lines. On the other hand, magnesium contents increased in susceptible group but decreased in resistant group. The over all results proved that considerable variation exists in micro mineral contents of resistant and susceptible lines of lentil. (author)

Variations in pore characteristics in high volatile bituminous coals: Implications for coal bed gas content

Science.gov (United States)

Mastalerz, Maria; Drobniak, A.; Strapoc, D.; Solano-Acosta, W.; Rupp, J.

2008-01-01

The Seelyville Coal Member of the Linton Formation (Pennsylvanian) in Indiana was studied to: 1) understand variations in pore characteristics within a coal seam at a single location and compare these variations with changes occurring between the same coal at different locations, 2) elaborate on the influence of mineral-matter and maceral composition on mesopore and micropore characteristics, and 3) discuss implications of these variations for coal bed gas content. The coal is high volatile bituminous rank with R0 ranging from 0.57% to 0.60%. BET specific surface areas (determined by nitrogen adsorption) of the coals samples studied range from 1.8 to 22.9??m2/g, BJH adsorption mesopore volumes from 0.0041 to 0.0339??cm3/g, and micropore volumes (determined by carbon dioxide adsorption) from 0.0315 to 0.0540??cm3/g. The coals that had the largest specific surface areas and largest mesopore volumes occur at the shallowest depths, whereas the smallest values for these two parameters occur in the deepest coals. Micropore volumes, in contrast, are not depth-dependent. In the coal samples examined for this study, mineral-matter content influenced both specific surface area as well as mesopore and micropore volumes. It is especially clear in the case of micropores, where an increase in mineral-matter content parallels the decrease of micropore volume of the coal. No obvious relationships were observed between the total vitrinite content and pore characteristics but, after splitting vitrinite into individual macerals, we see that collotelinite influences both meso- and micropore volume positively, whereas collodetrinite contributes to the reduction of mesopore and micropore volumes. There are large variations in gas content within a single coal at a single location. Because of this variability, the entire thickness of the coal must be desorbed in order to determine gas content reliably and to accurately calculate the level of gas saturation. ?? 2008 Elsevier B.V. All

Comparisons of protein, lipid, phenolics, γ-oryzanol, vitamin E, and mineral contents in bran layer of sodium azide-induced red rice mutants.

Science.gov (United States)

Jeng, Toong Long; Ho, Pei Tzu; Shih, Yi Ju; Lai, Chia Chi; Wu, Min Tze; Sung, Jih Min

2011-06-01

The bran part of red rice grain is concentrated with many phytochemicals, including proanthocyanidins, oryzanol and vitamin E, that exert beneficial effects on human health, but it contains low levels of essential minerals such as Fe and Zn. In the present study, the protein, lipid, phytochemicals and mineral contents in bran samples were compared among red rice SA-586 and its NaN₃-induced mutants. The plant heights of NaN₃-induced mutants were decreased. The contents of protein, lipid, total phenolics, total flavonoids, total anthocyanins, total proanthocyanidins, total γ-oryzanol, total tocopherols and total tocotrienols also varied among the tested mutants. The brans of mutants M-18, M-56 and M-50 contained more proanthocyanidins, γ-oryzanol, vitamin E than that of SA-586, respectively. M-54 accumulated more Fe content (588.7 mg kg⁻¹ bran dry weight) than SA-586 (100.1 mg kg⁻¹ bran dry weight). The brans of M-18, M-50 and M-56 are good sources of proanthocyanidins, vitamin E and γ-oryzanol, respectively, while the bran of M-54 is rich in Fe. Thus these mutants could be used to produce high-value phytochemicals or Fe byproducts from bran during rice grain milling or as genetic resources for rice improvement programs. Copyright © 2011 Society of Chemical Industry.

Experiment-Based Sensitivity Analysis of Scaled Carbon-Fiber-Reinforced Elastomeric Isolators in Bonded Applications

Directory of Open Access Journals (Sweden)

Farshad Hedayati Dezfuli

2016-01-01

Full Text Available Fiber-reinforced elastomeric isolators (FREIs are a new type of elastomeric base isolation systems. Producing FREIs in the form of long laminated pads and cutting them to the required size significantly reduces the time and cost of the manufacturing process. Due to the lack of adequate information on the performance of FREIs in bonded applications, the goal of this study is to assess the performance sensitivity of 1/4-scale carbon-FREIs based on the experimental tests. The scaled carbon-FREIs are manufactured using a fast cold-vulcanization process. The effect of several factors including the vertical pressure, the lateral cyclic rate, the number of rubber layers, and the thickness of carbon fiber-reinforced layers are explored on the cyclic behavior of rubber bearings. Results show that the effect of vertical pressure on the lateral response of base isolators is negligible. However, decreasing the cyclic loading rate increases the lateral flexibility and the damping capacity. Additionally, carbon fiber-reinforced layers can be considered as a minor source of energy dissipation.

Mineralization dynamics in soil fertilized with seaweed-fish waste compost.

Science.gov (United States)

Illera-Vives, Marta; López-Fabal, Adolfo; López-Mosquera, M Elvira; Ribeiro, Henrique M

2015-12-01

Seaweed and fish waste can be composted together to obtain fertilizer with high organic matter and nutrient contents. The nutrients, however, are mostly in organic form and must be mineralized to make them available to plants. The objective of this work was to establish a usage guideline for the compost by studying its mineralization dynamics. Also, the release of inorganic N and C from soil fertilized with the compost was monitored and modelled. C and N were released throughout the assay, to an extent significantly dependent on fertilizer rate. Mineralization of both elements fitted a first-order exponential model, and each fertilizer rate required using a specific fitting model. An increased rate favoured mineralization (especially of carbon). After 90 days, 2.3% of C and 7.7% of N were mineralized (and 23.3% of total nitrogen made plant available) with the higher rate. C mineralization was slow because organic matter in the compost was very stable. On the other hand, the relatively high initial content in mineral N of the compost increased gradually by the effect of mineralization. The amount of N available would suffice to meet the requirements of moderately demanding crops at the lower fertilizer rate, and even those of more demanding crops at the higher rate. © 2015 Society of Chemical Industry.

Influence of packaging and conditions of storaging on content of mineral water Guber-Srebrenica

OpenAIRE

Blagojević Dragana D.; Lazić Dragica; Škundrić Branko; Škundrić Jelena; Vukić Ljiljana

2008-01-01

Mineral waters are found in nature in greater depths most often in reduction conditions, so after surfacing their content alters in contact with oxygen, which is caused by oxidation of certain components. Due to this, efforts were made to make these waters more stabile so they could be used after certain time. This work monitors the stability of Guber (Argentaria)-Srebrenica water exposed to light and with addition of ascorbic acid. The methods of analysis and the parameters analyzed are: gra...

Effect of water content nitrogen gross mineralization and immobilization

International Nuclear Information System (INIS)

Videla C, Ximena; Parada, Ana Maria; Nario M, Adriana; Pino N, Ines; Hood, Rebeca

2005-01-01

The decomposition of organic matter in soil, and the accompanying mineralization and immobilization of inorganic N, are key processes in the soil plant cycle. It is hypothesized that moisture regime may also play an important role on these processes. Two laboratory studies were carried out to investigate the effect of moisture regime on gross mineralization and immobilization of N, in and Ultisol soil, which was incubated at 25 o C, under two moisture regimes, field capacity (CC) (40% w/w) and 85% of field capacity (34% w/w): Using mirror image 15 N isotope dilution techniques, it was possible to determine gross nitrification and mineralization rates. The rates of gross mineralization and nitrification rate in this soil was extremely rapid and efficient, specially with 85% CC. The N transformations varied with moisture regime (author)

Bone mineral content in the senescent rat femur: an assessment using single photon absorptiometry

International Nuclear Information System (INIS)

Kiebzak, G.M.; Smith, R.; Howe, J.C.; Sacktor, B.

1988-01-01

The single photon absorptiometry technique was evaluated for measuring bone mineral content (BMC) of the excised femurs of the rat, and the system was used to examine the changes in cortical and trabecular bone from young adult (6 mo), mature adult (12 mo), and senescent (24 mo) male and female animals. BMC of the femur midshaft, representing cortical bone, apparently increased progressively with advancing age. The width of the femur at the scan site also increased with age. Normalizing the midshaft BMC by width partially compensated for the age-associated increase. However, when bone mineral values were normalized by the cortical area at the scan site, to take into account the geometric differences in the femurs of different aged animals, maximum bone densities were found in the mature adult and these values decreased slightly in the femurs from senescent rats. In contrast, the BMC of the femur distal metaphysis, representing trabecular bone, decreased markedly in the aged rat. The loss of trabecular bone was also evident from morphological examination of the distal metaphysis. These findings indicated that bone mineral loss with age was site specific in the rat femur. These studies provided additional evidence that the rat might serve as a useful animal model for specific experiments related to the pathogenesis of age-associated osteopenia

Mineralogy and heavy metal content of secondary mineral salts: A ...

African Journals Online (AJOL)

Secondary minerals associated with acid mine drainage play an important role in metal cycling and may pose a geochemical hazard. The occurrence of secondary minerals indicates prevailing and past geochemical conditions. Detecting and characterising secondary minerals is necessary to the planning of remediation ...

In silico simulation and in vitro evaluation of an elastomeric scaffold using ultrasonic shear wave imaging

Science.gov (United States)

Yu, Jiao; Nie, Erwei; Zhu, Yanying; Hong, Yi

2018-03-01

Biodegradable elastomeric scaffolds for soft tissue repair represent a growing area of biomaterials research. Mechanical strength is one of the key factors to consider in the evaluation of candidate materials and the designs for tissue scaffolds. It is desirable to develop non-invasive evaluation methods of the mechanical property of scaffolds which would provide options for monitoring temporal mechanical property changes in situ. In this paper, we conduct in silico simulation and in vitro evaluation of an elastomeric scaffold using a novel ultrasonic shear wave imaging (USWI). The scaffold is fabricated from a biodegradable elastomer, poly(carbonate urethane) urea using salt leaching method. A numerical simulation is performed to test the robustness of the developed inversion algorithm for the elasticity map reconstruction which will be implemented in the phantom experiment. The generation and propagation of shear waves in a homogeneous tissue-mimicking medium with a circular scaffold inclusion is simulated and the elasticity map is well reconstructed. A PVA phantom experiment is performed to test the ability of USWI combined with the inversion algorithm to non-invasively characterize the mechanical property of a porous, biodegradable elastomeric scaffold. The elastic properties of the tested scaffold can be easily differentiated from the surrounding medium in the reconstructed image. The ability of the developed method to identify the edge of the scaffold and characterize the elasticity distribution is demonstrated. Preliminary results in this pilot study support the idea of applying the USWI based method for non-invasive elasticity characterization of tissue scaffolds.

Determination of the bone-mineral content of the peripheral skeleton (ulna and calcaneus) in chronic renal failure patients on maintenance dialysis using 125 I-photon absorptiometry

International Nuclear Information System (INIS)

Hieber, U.

1982-01-01

The bone-mineral content (BMC) of the peripheral skeleton was measured in 53 chronic renal-failure patients on maintenance dialysis using the 125 I photon absorptiometry according to Cameron. 39.6% of the patients were found to have a clearly pathological calcium content in calcaneus and ulna (33%). In total BMC assessments 43.4% of the patients examined showed strongly reduced BMC values at two measurement sites at least. Average bone-mineral content was below the value of the corresponding normal groups in all age groups of the dialysis patients. In addition, a significant correlation was verified to exist between the calcium contents of calcaneus and ulna. A significant correlation was found as well between reduced BMC values and dialysis duration. The correlation between the increased serum level of alkaline phosphatase and the reduced mineral content of the skeleton was significant as well. A minor but not significant correlation existed between the increase of the parathormone (PTH) level in the serum and the decrease of calcium content in calcaneus and ulna. A good correlation was found when contrasting the results of visual roentgenography and the BMC values established by photodensitometry: the median BMC value of patients with clear pathological X-ray findings was significantly below the one of patients without pathological X-ray findings. However, photon absorptiometry is superior to the subjective evaluation of X-ray pictures in the early diagnosis of bone diseases involving bone-mineral loss. (orig.) [de

Studi Komposisi Mineral Tepung Batu Bukit Kamang Sebagai Bahan Baku Pakan Sumber Mineral

Directory of Open Access Journals (Sweden)

Khalil

2007-04-01

Full Text Available The study was conducted to determine mineral content of limestone originated from natural deposit of Bukit Kamang for feedstuff. Six samples were prepared and chemically analyzed. The first was limestone in meal form as a product of local milling industry. Another five samples were deposit components with different color of blackish, dark blue, blue, light blue and white. There was 21 kinds of mineral determined which were divided into 3 groups: macros (Ca, P, Mg, Na, K, Cl and S, trace minerals (Mn, Zn, Fe, Cu, Se, Co and Mo and toxic elements (As, F, Hg, Cd, Pb, Ni and Cr. The results showed that Bukit Kamang’s limestone contained considerable high essential minerals of Ca, Se, Fe and Mn. The limestone consisted of 38%-40% Ca, 388 ppm Se, 295 ppm Fe and 205 ppm Mn. There were two toxic elements detected: Pb and Cd, but their concentration was found relatively low: 28 and 7 ppm, respectively.

Genome-wide SNP identification, linkage map construction and QTL mapping for seed mineral concentrations and contents in pea (Pisum sativum L.).

Science.gov (United States)

Ma, Yu; Coyne, Clarice J; Grusak, Michael A; Mazourek, Michael; Cheng, Peng; Main, Dorrie; McGee, Rebecca J

2017-02-13

Marker-assisted breeding is now routinely used in major crops to facilitate more efficient cultivar improvement. This has been significantly enabled by the use of next-generation sequencing technology to identify loci and markers associated with traits of interest. While rich in a range of nutritional components, such as protein, mineral nutrients, carbohydrates and several vitamins, pea (Pisum sativum L.), one of the oldest domesticated crops in the world, remains behind many other crops in the availability of genomic and genetic resources. To further improve mineral nutrient levels in pea seeds requires the development of genome-wide tools. The objectives of this research were to develop these tools by: identifying genome-wide single nucleotide polymorphisms (SNPs) using genotyping by sequencing (GBS); constructing a high-density linkage map and comparative maps with other legumes, and identifying quantitative trait loci (QTL) for levels of boron, calcium, iron, potassium, magnesium, manganese, molybdenum, phosphorous, sulfur, and zinc in the seed, as well as for seed weight. In this study, 1609 high quality SNPs were found to be polymorphic between 'Kiflica' and 'Aragorn', two parents of an F 6 -derived recombinant inbred line (RIL) population. Mapping 1683 markers including 75 previously published markers and 1608 SNPs developed from the present study generated a linkage map of size 1310.1 cM. Comparative mapping with other legumes demonstrated that the highest level of synteny was observed between pea and the genome of Medicago truncatula. QTL analysis of the RIL population across two locations revealed at least one QTL for each of the mineral nutrient traits. In total, 46 seed mineral concentration QTLs, 37 seed mineral content QTLs, and 6 seed weight QTLs were discovered. The QTLs explained from 2.4% to 43.3% of the phenotypic variance. The genome-wide SNPs and the genetic linkage map developed in this study permitted QTL identification for pea seed mineral

Association of Protein Intake with Bone Mineral Density and Bone Mineral Content among Elderly Women: The OSTPRE Fracture Prevention Study.

Science.gov (United States)

Isanejad, M; Sirola, J; Mursu, J; Kröger, H; Tuppurainen, M; Erkkilä, A T

2017-01-01

It has been hypothesized that high protein intakes are associated with lower bone mineral content (BMC). Previous studies yield conflicting results and thus far no studies have undertaken the interaction of body mass index (BMI) and physical activity with protein intakes in relation to BMC and bone mineral density (BMD). To evaluate the associations of dietary total protein (TP), animal protein (AP) and plant protein (PP) intakes with BMC and BMD and their changes. We tested also the interactions of protein intake with, obesity (BMI ≤30 vs. >30 kg/m2) and physical activity level (passive vs. active). Design/ Setting: Prospective cohort study (Osteoporosis Risk-Factor and Fracture-Prevention Study). Participants/measures: At the baseline, 554 women aged 65-72 years filled out a 3-day food record and a questionnaire covering data on lifestyle, physical activity, diseases, and medications. Intervention group received calcium 1000 mg/d and cholecalciferol 800 IU for 3 years. Control group received neither supplementation nor placebo. Bone density was measured at baseline and year 3, using dual energy x-ray absorptiometry. Multivariable regression analyses were conducted to examine the associations between protein intake and BMD and BMC. In cross-sectional analyses energy-adjusted TP (P≤0·029) and AP (P≤0·045) but not PP (g/d) were negatively associated with femoral neck (FN) BMD and BMC. Women with TP≥1·2 g/kg/body weight (BW) (Ptrend≤0·009) had lower FN, lumbar spine (LS) and total BMD and BMC. In follow-up analysis, TP (g/kg/BW) was inversely associated with LS BMD and LS BMC. The detrimental associations were stronger in women with BMI30 kg/m2 and physical activity.

Preparation of pHEMA-CP composites with high interfacial adhesionvia template-driven mineralization

Energy Technology Data Exchange (ETDEWEB)

Song, Jie; Saiz, Eduardo; Bertozzi, Carolyn R.

2002-12-05

We report a template-driven nucleation and mineral growth process for the high-affinity integration of calcium phosphate (CP) with a poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogel scaffold. A mineralization technique was developed that exposes carboxylate groups on the surface of crosslinked pHEMA, promoting high-affinity nucleation and growth of calcium phosphate on the surface along with extensive calcification of the hydrogel interior. External factors such as the heating rate, the agitation of the mineral stock solution and the duration of the process that affect the outcome of the mineralization were investigated. This template-driven mineralization technique provides an efficient approach toward bonelike composites with high mineral-hydrogel interfacial adhesion strength.

Thorium content of a mineral ore from Morro do Ferro by fission track technique

International Nuclear Information System (INIS)

Oliveira, C.A.N. de.

1980-10-01

The feasibility to determine thorium concentrations by fission track technique in samples of mineral ore has been demonstrated. The literature registers only the application of the fission track technique to mineral ore in the case where the fissionable element is uranium. The technique was applied to determine the thorium concentration of an ore sample from Morro do Ferro, taking advantage of the high thorium to uranium ratio in that mineral. The sample analysed presented a thorium concentration of 2467 +- 400 mg Th/Kg ore. The so called wet method was adopted by using the Bayer made Makrofol KG 10μm thick, as the detector foil, immersed in the thorium solution. The technique is also useful to determine thorium concentrations in environmental samples because of the following aspects: high sensitivity; fast chemical separation of interfering elements; low cost; and operational simplicity. (Author) [pt

Spectroscopic Evidence of the Improvement of Reactive Iron Mineral Content in Red Soil by Long-Term Application of Swine Manure.

Directory of Open Access Journals (Sweden)

Chichao Huang

Full Text Available Mineral elements in soil solutions are thought to be the precursor of the formation of reactive minerals, which play an important role in global carbon (C cycling. However, information regarding the regulation of mineral elements release in soil is scarce. Here, we examined the long-term (i.e., 23 yrs effects of fertilisation practices on Fe minerals in a red soil in Southern China. The results from chemical analysis and Fourier-transform infrared spectroscopy showed that long-term swine manure (M treatment released greater amounts of minerals into soil solutions than chemical fertilisers (NPK treatment, and Fe played a dominant role in the preservation of dissolved organic C. Furthermore, Fe K-edge X-ray absorption near-edge fine structure spectroscopy demonstrated that reactive Fe minerals were mainly composed of less crystalline ferrihydrite in the M-treated soil and more crystalline goethite in the NPK-treated soil. In conclusion, this study reported spectroscopic evidence of the improvement of reactive Femineral content in the M-treated soil colloids when compared to NPK-treated soil colloids.

Association Mapping of Quantitative Trait Loci for Mineral Element Contents in Whole Grain Rice (Oryza sativa L.).

Science.gov (United States)

Huang, Yan; Sun, Chengxiao; Min, Jie; Chen, Yaling; Tong, Chuan; Bao, Jinsong

2015-12-23

Mineral elements in brown rice grain play an important role in human health. In this study, variations in the content of iron (Fe), zinc (Zn), selenium (Se), cadmium (Cd), and lead (Pb) in 378 accessions of brown rice were investigated, and association mapping was used to detect the quantitative trait loci (QTLs) responsible for the variation. Among seven subpopulations, the mean values of Zn and Cd in the japonica group were significantly higher than in the indica groups. The population structure accounted for from 5.7% (Se) to 22.1% (Pb) of the total variation. Correlation analyses showed that Pb was positively correlated with the other minerals (P rice grain by marker-assisted selection (MAS).

Increasing the calcium content of mealworms (Tenebrio molitor) to improve their nutritional value for bone mineralization of growing chicks.

Science.gov (United States)

Klasing, K C; Thacker, P; Lopez, M A; Calvert, C C

2000-12-01

The purpose of these studies was to determine the husbandry variables that optimize the Ca content of mealworms (Tenebrio molitor) and to determine the bioavailability of this Ca for bone mineralization in chicks that consume the mealworms. To determine the optimal level of Ca in the substrates used in short-term (mealworms and to determine the length of time that mealworms should be exposed to high-Ca substrates, mealworms were placed in either a wheat bran or a chicken starter substrate supplemented with 0, 4, 8, or 12% Ca from CaCO3. The mealworms were harvested after 0.5, 1, 2, 3, 4, 7, or 14 days. The Ca content of the mealworms was greatest with the use of chicken starter and increased linearly with the Ca content of the substrate. In general, the Ca content of the mealworms increased during the first 24 hr and decreased after > or = 1 wk, especially at the higher levels of Ca supplementation. The chicken starter also resulted in higher levels of vitamin D in mealworms. Mealworms held in wheat bran with 8% Ca were fed to growing chicks. Ca bioavailability was calculated from the chicks' bone ash. The Ca in these mealworms was 76% as bioavailable as the Ca in oyster shell.

Elastomeric composites with tuned electromagnetic characteristics

International Nuclear Information System (INIS)

Wheeland, Sara; Bayatpur, Farhad; Amirkhizi, Alireza V; Nemat-Nasser, Sia

2013-01-01

This paper presents a novel elastomeric composite that exhibits a deformation-induced change in chirality. Previous efforts primarily dealt with a coil array in air without chiral tuning. Here, a composite is created that consists of an array of parallel, metallic helices of the same handedness embedded in a polymer matrix. The chiral response of the composite depends on pitch, coil diameter, wire thickness and coil spacing; however, pitch has the greatest effect on electromagnetic performance. The present study explores this effect by using helical elements to construct a chiral medium that can be mechanically stretched to adjust pitch. This adjustment directly affects the overall chirality of the composite. A prototype sample of the composite, fabricated for operation between 5.5–12.5 GHz, demonstrates repeatable elastic deformation. Using a transmit/receive measurement setup, the composite scattering response is measured over the frequency interval. The results indicate substantial tuning of chirality through deformation. An increase in axial strain of up to 30% yields a ∼18% change in axial chirality. (paper)

Minerals Yearbook, volume I, Metals and Minerals

Science.gov (United States)

,

2018-01-01

The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

Frictional resistance of orthodontic wires tied with 3 types of elastomeric ligatures

Directory of Open Access Journals (Sweden)

Amanda Carneiro da Cunha

2011-12-01

Full Text Available The aims of this study were to determine and compare frictional resistance obtained by low-friction and conventional elastomeric ligatures in the presence of artificial saliva, and observe whether this variable changed after 21 days. Super Slick® low-friction elastomeric ligatures and conventional ligatures of the brands TP conventional® and Unitek® were placed on standard edgewise maxillary central incisor metal brackets, slot .022" × .028" tying rectangular orthodontic wires .018" × .025". Three experimental groups were arranged according to the type of ligature and a control group in which no wires were used. The friction values obtained between the bracket/wire/ligature set were measured using a Universal Test Machine at a speed of 20 mm/minute, at two experimental time intervals: T0 - immediately after specimen fabrication; and T1 - 21 days after fabrication and immersion in artificial saliva at 37 ºC. Conventional Unitek ligatures and the low-friction ligature (Super Slick showed the lowest friction values at T0. After 21 days (T1, however, conventional Unitek ligatures presented the lowest value. All groups assessed from T0 to T1 showed a numerical reduction in friction values, suggesting that time, heat and humidity may cause elastic degradation, however this was not verified statistically (P > 0.05.

The Influence of the Addition of Polyacrylic Hydrogel on the Content of Proteins, Minerals and Trace Elements in Milk Protein Solutions

Directory of Open Access Journals (Sweden)

Aleksandar Ž. Kostić

2014-01-01

Full Text Available Solutions of milk protein concentrate, whey protein concentrate and bovine serum albumin (BSA were treated with polyacrylic hydrogel to establish whether the hydrogel could be used for decontamination of heavy metal ions from milk protein-based products. The obtained results indicated that swelling of hydrogel in these solutions had different effects on their mineral, trace element and total protein content. Total protein and phosphorus content increased in milk protein concentrate and whey protein concentrate solutions after swelling of hydrogel without changes in their protein compositions. On the other hand, the protein content in BSA solution decreased after swelling. The content of Na did not change in milk protein concentrate solution, whereas it significantly increased in whey protein concentrate solution after hydrogel swelling. The content of Ca and Mg was reduced after the swelling in milk protein concentrate and whey protein concentrate solutions for 20.3–63.4 %, depending on the analysed sample and the mineral. The content of Zn did not change during swelling, whereas the content of Fe, Cu, Mn, Ni and Pb significantly decreased after hydrogel swelling in all analysed samples. According to the obtained results, the addition of polyacrylic hydrogel to milk and whey protein concentrate solutions can significantly decrease the content of heavy metal ions without affecting their protein composition. Therefore, this work could be useful in developing a new technological process for heavy metal purification of milk protein-based products.

Growth hormone (GH) treatment increases serum insulin-like growth factor binding protein-3, bone isoenzyme alkaline phosphatase and forearm bone mineral content in young adults with GH deficiency of childhood onset

DEFF Research Database (Denmark)

Juul, A; Pedersen, S A; Sørensen, S

1994-01-01

Recent studies have demonstrated that growth hormone (GH)-deficient adults have a markedly decreased bone mineral content compared to healthy adults. However, there are conflicting results regarding the effects of GH treatment on bone mineral content in GH-deficient adults. Therefore, we evaluated...... the effect of GH treatment on a marker of bone formation (bone alkaline phosphatase), hepatic excretory function and distal forearm bone mineral content in GH-deficient adults. Growth hormone was administered subcutaneously in 21 adults (13 males and 8 females) with GH deficiency of childhood onset for 4...

[The content of mineral elements in Camellia olei fera ovary at pollination and fertilization stages determined by auto discrete analyzers and atomic absorption spectrophotometer].

Science.gov (United States)

Zou, Feng; Yuan, De-Yi; Gao, Chao; Liao, Ting; Chen, Wen-Tao; Han, Zhi-Qiang; Zhang, Lin

2014-04-01

In order to elucidate the nutrition of Camellia olei fera at pollination and fertilization stages, the contents of mineral elements were determined by auto discrete analyzers and atomic absorption spectrophotometer, and the change in the contents of mineral elements was studied and analysed under the condition of self- and cross-pollination. The results are showed that nine kinds of mineral elements contents were of "S" or "W" type curve changes at the pollination and fertilization stages of Camellia olei fera. N, K, Zn, Cu, Ca, Mn element content changes showed "S" curve under the self- and out-crossing, the content of N reaching the highest was 3.445 8 mg x g(-1) in self-pollination of 20 d; K content reaching the highest at the cross-pollination 20 d was 6.275 5 mg x g(-1); Zn content in self-pollination of 10 d reaching the highest was 0.070 5 mg x g(-1); Cu content in the cross-pollination of 5 d up to the highest was 0.061 0 mg x g(-1); Ca content in the cross-pollination of 15 d up to the highest was 3.714 5 mg x g(-1); the content of Mn reaching the highest in self-pollination 30 d was 2. 161 5 mg x g(-1). Fe, P, Mg element content changes was of "S" type curve in selfing and was of "W" type curve in outcrossing, Fe content in the self-pollination 10 d up to the highest was 0.453 0 mg x g(-1); P content in self-pollination of 20 d reaching the highest was 6.731 8 mg x g(-1); the content of Mg up to the highest in self-pollination 25 d was 2.724 0 mg x g(-1). The results can be used as a reference for spraying foliar fertilizer, and improving seed setting rate and yield in Camellia olei fera.

Role of minerals in animal health disorders

Directory of Open Access Journals (Sweden)

Sinovec Zlatan J.

2005-01-01

Full Text Available All mineral matter, essential or non-essential, can have a significant influence on production results and the health of animals, if large quantities of them are present in a feed ration. A maximally tolerant content depends on the animal specie and category. Many factors, such as physiological status (growth, lactation, etc., nutritive status, content and ratio of nutritive matter in the ration, duration of exposure, and the biological level of utilization of elements, also affect the maximally tolerant content of mineral matter in feed. The content of certain mineral matter in plant feed significantly depends on the soil factor, as well as the content and level of utilization of mineral matter from the soil. Mn, Se and Mo can be present in plant feed in such quantities as to induce toxicosis. Industrial contaminants, Cd, Pb or F, can contaminate plants, in particular their leaves, in quantities which lead to the appearance of clinical signs of conventional toxicosis. Moreover, natural water can contain large quantities of S, F, Na, Mg, or Fe, and certain mineral matter can get into water through industrial waste. In addition to the above, it is possible to cause unwanted effects through the frequent, but primarily unprofessional use of mineral additives, since it is extremely important, besides meeting the mineral requirements of each individual element, to secure a ratio among the mineral matter themselves as well as with other nutritive matter. Mineral matter present in food are in mutual interference, and these relations can be synergistic or antagonistic. The sufficiency of a large number of mineral matter has a negative effect on the utilization of other matter (conditional and/or border deficiency, while certain elements cause the clinical appearance of toxic effects. The accidental intake of large quantities of certain mineral matter is revealed as clinical signs of acute toxicosis, which is very different from chronic effects caused by

The surface-active bio oil solution in sulfured copper mineral benefit

Directory of Open Access Journals (Sweden)

L.E. Brossard

2005-03-01

Full Text Available Surface-active bio-oil (SABO solutions, prepared from vacuum pyrolysis bio-oil with a phenol-to-levoglucosan mass ratio of 4.8, was compared to pine-oil (PO as foaming agent in the process of flotation of sulfured copper minerals. With the aid of 2³ factorial designs, regression models were obtained for % Cu in flotation concentrate (L Cu and % Cu recovery (R, as functions of foaming agent-to-Cu mineral, collector-to-Cu mineral mass ratio and liquid-to-solid ratio (v/w. Experimental designs composed of a saturated design in its first half and a fold over design in its second half allowed to study the influence of flotation conditions on L Cu and R when SABO was the foaming agent. The factors selected were: particle size; pulp pH; flotation time; initial Cu content in the mineral (mineral type; liquid-to-solid ratio and finally SABO-to-mineral and collector-to-mineral mass ratio. Within the chosen experimental region only pulp pH affected significantly both responses. It is shown that high pulp pH, in the presence of minerals rich in Cu content leads to a significant increase in L Cu and R. Although SABO to mineral mass ratio is high compared to PO, it is considered that an optimization study on pulp pH should reduce this difference making SABO an attractive alternative to PO and a way to widen the field of applications of pyrolysis products.

Utilization of the UV laser with picosecond pulses for the formation of surface microstructures on elastomeric plastics

Science.gov (United States)

Antoszewski, B.; Tofil, S.; Scendo, M.; Tarelnik, W.

2017-08-01

Elastomeric plastics belong to a wide range of polymeric materials with special properties. They are used as construction material for seals and other components in many branches of industry and, in particular, in the biomedical industry, mechatronics, electronics and chemical equipment. The micromachining of surfaces of these materials can be used to build micro-flow, insulating, dispensing systems and chemical and biological reactors. The paper presents results of research on the effects of micro-machining of selected elastomeric plastics using a UV laser emitting picosecond pulses. The authors see the prospective application of the developed technology in the sealing technique in particular to shaping the sealing pieces co-operating with the surface of the element. The result of the study is meant to show parameters of the UV laser’s performance when producing typical components such as grooves, recesses for optimum ablation in terms of quality and productivity.

Printing nature: Unraveling the role of nacre's mineral bridges.

Science.gov (United States)

Gu, Grace X; Libonati, Flavia; Wettermark, Susan D; Buehler, Markus J

2017-12-01

Creating materials with strength and toughness has been a long-sought goal. Conventional engineering materials often face a trade-off between strength and toughness, prompting researchers seeking to overcome these limitations to explore more sophisticated materials, such as composites. This paradigm shift in material design is spurred by nature, which exhibits a plethora of heterogeneous materials that offer outstanding material properties, and many natural materials are widely regarded as examples of high-performing hybrid materials. A classic example is nacre, also known as mother-of-pearl, which boasts a combination of high stiffness, strength, and fracture toughness. Various microstructural features contribute to the toughness of nacre, including mineral bridges (MBs), nano-asperities, and waviness of the constituent platelets. Recent research in biomimicry suggests that MBs contribute to the high strength and toughness observed in nacre and nacre-inspired materials. However, previous work in this area did not allow for complete control over the length scale of the bridges and had limitations on the volume fraction of mineral content. In this work, we present a systematic investigation elucidating the effects of structural parameters, such as volume fraction of mineral phase and density of MBs, on the mechanical response of nacre-inspired additive manufactured composites. Our results demonstrate that it is possible to tune the composite properties by tuning sizes and content of structural features (e.g. MBs and mineral content) in a heterogeneous material. Looking forward, this systematic approach enables materials-by-design of complex architectures to tackle demanding engineering challenges in the future. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects of different irrigation practices using treated wastewater on tomato yields, quality, water productivity, and soil and fruit mineral contents.

Science.gov (United States)

Demir, Azize Dogan; Sahin, Ustun

2017-11-01

Wastewater use in agricultural irrigation is becoming a common practice in order to meet the rising water demands in arid and semi-arid regions. The study was conducted to determine the effects of the full (FI), deficit (DI), and partial root-zone drying (PRD) irrigation practices using treated municipal wastewater (TWW) and freshwater (FW) on tomato yield, water use, fruit quality, and soil and fruit heavy metal concentrations. The TWW significantly increased marketable yield compared to the FW, as well as decreased water consumption. Therefore, water use efficiency (WUE) in the TWW was significantly higher than in the FW. Although the DI and the PRD practices caused less yields, these practices significantly increased WUE values due to less irrigation water applied. The water-yield linear relationships were statistically significant. TWW significantly increased titratable acidity and vitamin C contents. Reduced irrigation provided significantly lower titratable acidity, vitamin C, and lycopene contents. TWW increased the surface soil and fruit mineral contents in response to FW. Greater increases were observed under FI, and mineral contents declined with reduction in irrigation water. Heavy metal accumulation in soils was within safe limits. However, Cd and Pb contents in fruits exceeded standard limits given by FAO/WHO. Higher metal pollution index values determined for fruits also indicated that TWW application, especially under FI, might cause health risks in long term.

Particulate Organic Matter Affects Soil Nitrogen Mineralization under Two Crop Rotation Systems.

Directory of Open Access Journals (Sweden)

Rongyan Bu

Full Text Available Changes in the quantity and/or quality of soil labile organic matter between and after different types of cultivation system could play a dominant role in soil nitrogen (N mineralization. The quantity and quality of particulate organic matter (POM and potentially mineralizable-N (PMN contents were measured in soils from 16 paired rice-rapeseed (RR/cotton-rapeseed (CR rotations sites in Hubei province, central China. Then four paired soils encompassing low (10th percentile, intermediate (25th and 75th percentiles, and high (90th percentile levels of soil PMN were selected to further study the effects of POM on soil N mineralization by quantifying the net N mineralization in original soils and soils from which POM was removed. Both soil POM carbon (POM-C and N (POM-N contents were 45.8% and 55.8% higher under the RR rotation compared to the CR rotation, respectively. The PMN contents were highly correlated with the POM contents. The PMN and microbial biomass N (MBN contents concurrently and significantly decreased when POM was removed. The reduction rate of PMN was positively correlated with changes in MBN after the removal of POM. The reduction rates of PMN and MBN after POM removal are lower under RR rotations (38.0% and 16.3%, respectively than CR rotations (45.6% and 19.5%, respectively. Furthermore, infrared spectroscopy indicated that compounds with low-bioavailability accumulated (e.g., aromatic recalcitrant materials in the soil POM fraction under the RR rotation but not under the CR rotation. The results of the present study demonstrated that POM plays a vital role in soil N mineralization under different rotation systems. The discrepancy between POM content and composition resulting from different crop rotation systems caused differences in N mineralization in soils.

The study of the changes in the biochemical and mineral contents of bones of Catla catla due to lead intoxication.

Science.gov (United States)

Palaniappan, P L R M; Krishnakumar, N; Vadivelu, M; Vijayasundaram, V

2010-02-01

In the present study, an attempt has been made to analyze the changes in the biochemical and mineral contents of lead-intoxicated bones of Catla catla at subchronic (15.5 ppm) exposure, and also to determine whether the effects of Pb intoxication can be reversed with the chelating agent meso 2, 3-dimercaptosuccinic acid (DMSA) on the bones of freshwater fingerlings Catla catla by using Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), and atomic absorption spectrophotometer techniques. The FT-IR spectra of the lead-exposed bones show significant alteration in the biochemical constituents. The XRD analysis showed a decrease in crystallinity due to lead exposure. Further, the Ca, Mg, and P contents of the lead-exposed bones were less than those of the control group, and there was an increase in the mineral contents of the bones after DMSA treatment. In conclusion, the present study suggests that the subchronic lead exposure results in severe loss of bone minerals. The overall decrease in the FT-IR band intensity of Pb-exposed bones relative to the control indicates a decrease in the biochemical constituents like proteins and lipids. The increase in the band intensity after treatment with chelating agent DMSA indicates increased biochemical constituents, showing that the subchronic effects of lead can be reversed by DMSA. The amide I bands observed at 1654 cm(-1) in the present study suggest that the protein is dominated by alpha-helical structure.

Elastomeric Structural Attachment Concepts for Aircraft Flap Noise Reduction - Challenges and Approaches to Hyperelastic Structural Modeling and Analysis

Science.gov (United States)

Sreekantamurthy, Thammaiah; Turner, Travis L.; Moore, James B.; Su, Ji

2014-01-01

Airframe noise is a significant part of the overall noise of transport aircraft during the approach and landing phases of flight. Airframe noise reduction is currently emphasized under the Environmentally Responsible Aviation (ERA) and Fixed Wing (FW) Project goals of NASA. A promising concept for trailing-edge-flap noise reduction is a flexible structural element or link that connects the side edges of the deployable flap to the adjacent main-wing structure. The proposed solution is distinguished by minimization of the span-wise extent of the structural link, thereby minimizing the aerodynamic load on the link structure at the expense of increased deformation requirement. Development of such a flexible structural link necessitated application of hyperelastic materials, atypical structural configurations and novel interface hardware. The resulting highly-deformable structural concept was termed the FLEXible Side Edge Link (FLEXSEL) concept. Prediction of atypical elastomeric deformation responses from detailed structural analysis was essential for evaluating feasible concepts that met the design constraints. The focus of this paper is to describe the many challenges encountered with hyperelastic finite element modeling and the nonlinear structural analysis of evolving FLEXSEL concepts. Detailed herein is the nonlinear analysis of FLEXSEL concepts that emerged during the project which include solid-section, foamcore, hollow, extended-span and pre-stressed concepts. Coupon-level analysis performed on elastomeric interface joints, which form a part of the FLEXSEL topology development, are also presented.

Forces released during alignment with a preadjusted appliances with SPEED supercable wire and different types of elastomeric ligatures

Directory of Open Access Journals (Sweden)

Suruchi Jatol-Tekade

2016-01-01

Full Text Available Introduction: The purpose of this in vitro study was to evaluate a new combination of wire and ligature to reduce friction further by combining slide ligatures and supercable wires. Materials and Methods: The testing model consisted of five stainless steel 0.022 inch preadjusted brackets for second premolar, first premolar, canine, lateral incisor, and central incisor. The canine bracket was welded to a sliding bar that allowed different vertical positions. The forces generated by five sizes of wires superelastic nickel-titanium (SE Ni-Ti (Unitek Nitinol Super-Elastic Archwire of diameter 0.012", 0.014", 0.016", 0.018", and 0.020" inch and three sizes of SPEED supercable wires (0.016", 0.018", and 0.022" inch with the two types of elastomeric ligatures; conventional elastomeric ligatures (CELs (Unitek, silver mini modules, with inside diameter of 1.3 mm and thickness of 0.9 mm and nonconventional elastomeric ligatures (NCELs (Slide, Leone Orthodontic Products, Sesto Fiorentino, Firenze, Italy at different amounts of upward canine misalignment (CM (1.5, 3, 4.5, and 6 mm were recorded. Results and Conclusions: Significant differences between CEL and NCEL were found for all tested variables (P - 0.01 a noticeable amount of force was generated with the NCEL at all four canine positions with all three wire sizes (from about 50 to about 150 g. With 4.5 mm of CM or more, the average amount of released force with the CEL was approximately zero.

Fabrication of elastomeric silk fibers.

Science.gov (United States)

Bradner, Sarah A; Partlow, Benjamin P; Cebe, Peggy; Omenetto, Fiorenzo G; Kaplan, David L

2017-09-01

Methods to generate fibers from hydrogels, with control over mechanical properties, fiber diameter, and crystallinity, while retaining cytocompatibility and degradability, would expand options for biomaterials. Here, we exploited features of silk fibroin protein for the formation of tunable silk hydrogel fibers. The biological, chemical, and morphological features inherent to silk were combined with elastomeric properties gained through enzymatic crosslinking of the protein. Postprocessing via methanol and autoclaving provided tunable control of fiber features. Mechanical, optical, and chemical analyses demonstrated control of fiber properties by exploiting the physical cross-links, and generating double network hydrogels consisting of chemical and physical cross-links. Structure and chemical analyses revealed crystallinity from 30 to 50%, modulus from 0.5 to 4 MPa, and ultimate strength 1-5 MPa depending on the processing method. Fabrication and postprocessing combined provided fibers with extensibility from 100 to 400% ultimate strain. Fibers strained to 100% exhibited fourth order birefringence, revealing macroscopic orientation driven by chain mobility. The physical cross-links were influenced in part by the drying rate of fabricated materials, where bound water, packing density, and microstructural homogeneity influenced cross-linking efficiency. The ability to generate robust and versatile hydrogel microfibers is desirable for bottom-up assembly of biological tissues and for broader biomaterial applications. © 2017 Wiley Periodicals, Inc.

VEIN-TYPE URANIUM MINERALIZATION IN THE EASTERN DESERT OF EGYPT

Directory of Open Access Journals (Sweden)

M. M. Ghoneim

2018-03-01

Full Text Available Vein type uranium deposits where uranium minerals fill cavities veins, fractures, fissures, pore spaces, shear zone, breccia and stockworks in igneous, meta-sediments and metamorphic rocks are common source of uranium mineralization all over the wold. In Egypt, El-Erediya, El-Missikat and El Sela uranium mineralization occur in younger granite plutons in the Eastern Desert of Egypt. These plutons are considered as good examples of intra-granitic vein-type uranium mineralization. The goal of this review article is to study the characteristics of granites and Th-U vein mineralization El Sela area. Main tasks are characteristics of vein type uranium mineralization in the world and Egypt, characteristics of ore-bearing intrusive rocks in the El Sela area, mineralogy of Th-U vein-type mineralization in El Sela area and secondary U and Th minerals in granites. Results. The article revealed that El Sela granite is a peraluminous, high-K Calc-Alkaline (HKCA granite. Two-mica leucogranitic pluton is considered the source rock of U-mineralization at El-Sela area, while the altered microgranite and dolerite dikes are good traps for these mineralizations. The reactivated faults system trending ENE-WSW and NNW-SSE make favorable condition to form uranium mineralization associated with polymetallic mineralization that are redeposited in the two mica granite, microgranite and dolerite dikes. The metallic mineral assemblages in the veins mainly consist of pyrite, chalcopyrite, galena, sphalerite and fluorite that are associated with primary (uraninite, coffinite and secondary U-mineralization (uranophane and autunite that occur either as disseminated clusters or as microfracture filling and coating joint surface. Five types of thorite-group minerals can be distinguished: thorite, Zr-rich thorite, phosphothorite, uranothorite and Zr-rich uranothorite. ThO2 content of uraninite vary from (1.1 to 3 wt.%, for PbO contents from 1.16 to 2.35 wt.%, P2O5 contents from

Development of a flameproof elastic elastomeric fiber

Science.gov (United States)

Howarth, J. T.; Nilgrom, J.; Massucco, A.; Sheth, S. G.; Dawn, F. S.

1971-01-01

Various flexible polyurethane structures containing halogen were synthesized from polyesters derived from aliphatic or aromatic polyols and dibasic acids. Aliphatic halide structures could not be used because they are unstable at the required reaction temperatures, giving of hydrogen halide which hydrolyzes the ester linkages. In contract, halogen-containing aromatic polyols were stable and satisfactory products were made. The most promising composition, a brominated neopentyl glycol capped with toluene disocyanate, was used as a conventional diisocyanate, in conjunction with hydroxy-terminated polyethers or polyesters to form elastomeric urethanes containing about 10% bromine with weight. Products made in this manner will not burn in air, have an oxygen index value of about 25, and have tensile strength values of about 5,000 psi at 450% elongation. The most efficient additives for imparting flame retardancy to Spandex urethanes are aromatic halides and the most effective of these are the bromide compounds. Various levels of flame retardancy have been achieved depending on the levels of additives used.

Effects of Chrysosporum (Aphanizomenon) ovalisporum extracts containing cylindrospermopsin on growth, photosynthetic capacity, and mineral content of carrots (Daucus carota).

Science.gov (United States)

Guzmán-Guillén, Remedios; Campos, Alexandre; Machado, Joana; Freitas, Marisa; Azevedo, Joana; Pinto, Edgar; Almeida, Agostinho; Cameán, Ana M; Vasconcelos, Vitor

2017-01-01

Natural toxins produced by freshwater cyanobacteria, such as cylindrospermopsin, have been regarded as an emergent environmental threat. Despite the risks for food safety, the impact of these water contaminants in agriculture is not yet fully understood. Carrots (Daucus carota) are root vegetables, extensively consumed worldwide with great importance for human nourishment and economy. It is, therefore, important to evaluate the possible effects of using water contaminated with cyanotoxins on carrot cultivation. The aim of this work was to investigate cylindrospermopsin effects on D. carota grown in soil and irrigated for 30 days, with a Chrysosporum ovalisporum extract containing environmentally relevant concentrations of cylindrospermopsin (10 and 50 μg/L). The parameters evaluated were plant growth, photosynthetic capacity, and nutritional value (mineral content) in roots of carrots, as these are the edible parts of this plant crop. The results show that, exposure to cylindrospermopsin did not have a clear negative effect on growth or photosynthesis of D. carota, even leading to an increase of both parameters. However, alterations in mineral contents were detected after exposure to crude extracts of C. ovalisporum containing cylindrospermopsin. A general decline was observed for most minerals (Ca, Mg, Na, Fe, Mn, Zn, Mo, and P), although an increase was shown in the case of K and Cu, pointing to a possible interference of the cyanobacterial extract in mineral uptake. This study is the first to evaluate the effects of C. ovalisporum extracts on a root vegetable, however, more research is necessary to understand the effects of this toxin in environmentally relevant scenarios.

Blackberry wines mineral and heavy metal content determination after dry ashing: multivariate data analysis as a tool for fruit wine quality control.

Science.gov (United States)

Amidžić Klarić, Daniela; Klarić, Ilija; Mornar, Ana; Velić, Darko; Velić, Natalija

2015-08-01

This study brings out the data on the content of 21 mineral and heavy metal in 15 blackberry wines made of conventionally and organically grown blackberries. The objective of this study was to classify the blackberry wine samples based on their mineral composition and the applied cultivation method of the starting raw material by using chemometric analysis. The metal content of Croatian blackberry wine samples was determined by AAS after dry ashing. The comparison between an organic and conventional group of investigated blackberry wines showed statistically significant difference in concentrations of Si and Li, where the organic group contained higher concentrations of these compounds. According to multivariate data analysis, the model based on the original metal content data set finally included seven original variables (K, Fe, Mn, Cu, Ba, Cd and Cr) and gave a satisfactory separation of two applied cultivation methods of the starting raw material.

Effect on light intensity and mineral nutrition on carbohydrate and organic acid content in leaves of young coffee plants

International Nuclear Information System (INIS)

Georgiev, G.; Vento, Kh.

1975-01-01

Young coffee plants (Coffea arabica, L., var. Caturra) were grown under different conditions of mineral nutrition (1/8 N-P-K, N-P-K, 3 N-P-K, N 1/2-P-K and N-2P-K) and illumination (directly in the sunlight or shaded) with the aim of studying the effect of light and mineral nutrition on carbohydrate and organic acid content of the leaves. For determining these compounds 14 CO 2 was used. Sugars were separated after the method of paper chromatography. The results obtained showed that the incorporation of 14 C in sugars and organic acids was more intensive in plants grown directly in the sunlight, while in starch 14 C was incorporated more intensively in the shaded plants. Carbohydrate content rose parallel to the increase of nitrogen in the nutrient solution. Changingthe rate of phosphorus from 1/2P to two doses exerted highest effect on 14 C incorporation in starch and in hemicellulose. (author)

Avoiding toxic levels of essential minerals: a forgotten factor in deer diet preferences.

Science.gov (United States)

Ceacero, Francisco; Landete-Castillejos, Tomás; Olguín, Augusto; Miranda, María; García, Andrés; Martínez, Alberto; Cassinello, Jorge; Miguel, Valentín; Gallego, Laureano

2015-01-01

Ungulates select diets with high energy, protein, and sodium contents. However, it is scarcely known the influence of essential minerals other than Na in diet preferences. Moreover, almost no information is available about the possible influence of toxic levels of essential minerals on avoidance of certain plant species. The aim of this research was to test the relative importance of mineral content of plants in diet selection by red deer (Cervus elaphus) in an annual basis. We determined mineral, protein and ash content in 35 common Mediterranean plant species (the most common ones in the study area). These plant species were previously classified as preferred and non-preferred. We found that deer preferred plants with low contents of Ca, Mg, K, P, S, Cu, Sr and Zn. The model obtained was greatly accurate identifying the preferred plant species (91.3% of correct assignments). After a detailed analysis of these minerals (considering deficiencies and toxicity levels both in preferred and non-preferred plants) we suggest that the avoidance of excessive sulphur in diet (i.e., selection for plants with low sulphur content) seems to override the maximization for other nutrients. Low sulphur content seems to be a forgotten factor with certain relevance for explaining diet selection in deer. Recent studies in livestock support this conclusion, which is highlighted here for the first time in diet selection by a wild large herbivore. Our results suggest that future studies should also take into account the toxicity levels of minerals as potential drivers of preferences.

Influence of breed, year season and lactation stage on the buffalo milk mineral content

Directory of Open Access Journals (Sweden)

G. Crudeli

2010-02-01

Full Text Available This study was conducted to determine the milk mineral composition of buffalo raised in Corrientes, Argentina, as well as to investigate variations attributed to breed, lactation period and time of the year. Milk samples (n = 105 were collected from 25 Murrah, Mediterranean, Jafarabadi and half-breed Murrah x Mediterranean buffaloes of second and fifth lactation. Animals were located in a dairy farm area with subtropical wet climate with 1.690 mm annual rains and annual mean temperature of 22°C. Mean records were: Ca (1.12 ± 0.40 g.kg-1, P (0.99 ± 0.32 g.kg-1, Mg (0.08± 0.02 g.kg-1, K (0.92 ± 0.25 g.kg-1, Na (0.35 ± 0.11 g.kg-1, Cu (0.35 ± 0.16 mg.kg-1, Mn (0.27 ± 0.10 mg.kg-1, Zn (4.10 ± 1.40 mg.kg-1 y Fe (1.61 ± 0.61 mg.kg-1. These parameters did not reveal significant differences attributable to breed, except for Mg. The time of the year affected the composition of the minerals, except for the Mg and Zn. The nursing stages affect the Ca, P, K and Cu concentrations. From the results obtained, it can be concluded that the mineral content in the milk of buffaloes, it is considerably influenced by regional factors.

X-ray-phase and IR-spectral study of clay rocks mineral content of the Caspian Sea Gulf depression

International Nuclear Information System (INIS)

Zakonov, A.N.; Mukhanova, M.U.

2000-01-01

Samples of clays selected from different oil fields (Sazankurak, Kemerkol, Kozha and others) and deposition depths are examined on both the X-ray diffractometers (Dron-2 and Dron-4) and the infrared-spectrometers (IR-20). In this diagnostic the American file with different minerals X-ray systematized data is used. The X-ray reflections, which are in compliance with suitable inter-plane distances and clay impurities reflex intensities are determined. With confirmation purpose for mineral content correctness obtained according X-ray-phase analysis the infrared-spectrometric method is used, in which principal attention was paid to absorption field (3,400-3,700 cm -1 ) of H 2 O and OH valency frequency vibrations

Effect of environment on protein, mineral and fat

African Journals Online (AJOL)

user

BACKGROUND: Faba bean (Vicia faba L.) is one of the most important high land pulse crops of ... on the protein, mineral and fat contents of advanced lines of faba bean genotypes grown .... proved essential in human nutrition (5). Faba bean ...

Sulcus reproduction with elastomeric impression materials: a new in vitro testing method.

Science.gov (United States)

Finger, Werner J; Kurokawa, Rie; Takahashi, Hidekazu; Komatsu, Masashi

2008-12-01

Aim of this study was to investigate the depth reproduction of differently wide sulci with elastomeric impression materials by single- and double-mix techniques using a tooth and sulcus model, simulating clinical conditions. Impressions with one vinyl polysiloxane (VPS; FLE), two polyethers (PE; IMP and P2), and one hybrid VPS/PE elastomer (FUS) were taken from a truncated steel cone with a circumferential 2 mm deep sulcus, 50, 100 or 200 microm wide. The "root surface" was in steel and the "periodontal tissue" in reversible hydrocolloid. Single-mix impressions were taken with light-body (L) or monophase (M) pastes, double-mix impressions with L as syringe and M or heavy-body (H) as tray materials (n=8). Sulcus reproduction was determined by 3D laser topography of impressions at eight locations, 45 degrees apart. Statistical data analysis by ANOVA and multiple comparison tests (pimpression materials only: FLE=IMP>FUS=P2. At 50 and 100 microm width, significant differences were found between materials (IMP>FUS=FLE>P2) and techniques (L+H=L+M>M>L). The sulcus model is considered useful for screening evaluation of elastomeric impression materials ability to reproduce narrow sulci. All tested materials and techniques reproduced 200 microm wide sulci to almost nominal depth. Irrespective of the impression technique used, IMP showed the best penetration ability in 50 and 100 microm sulci. Double-mix techniques are more suitable to reproduce narrow sulci than single-mix techniques.

A Comparative Analysis of Nutrients and Mineral Elements Content ...

African Journals Online (AJOL)

crude protein (Cp) ad crude fibre (Cf) content than A. gayanus. The high Cp .... protein. This gives an indication of relatively high quality of this grass species as livestock feed than its counterpart. Proteins play an important role in Carbon- dioxide fixation during .... Ruminant Nutrition, 1st edition, Macmillan Press. Ltd, London ...

Nonlinear analysis of r.c. framed buildings retrofitted with elastomeric and friction bearings under near-fault earthquakes

Science.gov (United States)

Mazza, Mirko

2015-12-01

Reinforced concrete (r.c.) framed buildings designed in compliance with inadequate seismic classifications and code provisions present in many cases a high vulnerability and need to be retrofitted. To this end, the insertion of a base isolation system allows a considerable reduction of the seismic loads transmitted to the superstructure. However, strong near-fault ground motions, which are characterised by long-duration horizontal pulses, may amplify the inelastic response of the superstructure and induce a failure of the isolation system. The above considerations point out the importance of checking the effectiveness of different isolation systems for retrofitting a r.c. framed structure. For this purpose, a numerical investigation is carried out with reference to a six-storey r.c. framed building, which, primarily designed (as to be a fixed-base one) in compliance with the previous Italian code (DM96) for a medium-risk seismic zone, has to be retrofitted by insertion of an isolation system at the base for attaining performance levels imposed by the current Italian code (NTC08) in a high-risk seismic zone. Besides the (fixed-base) original structure, three cases of base isolation are studied: elastomeric bearings acting alone (e.g. HDLRBs); in-parallel combination of elastomeric and friction bearings (e.g. high-damping-laminated-rubber bearings, HDLRBs and steel-PTFE sliding bearings, SBs); friction bearings acting alone (e.g. friction pendulum bearings, FPBs). The nonlinear analysis of the fixed-base and base-isolated structures subjected to horizontal components of near-fault ground motions is performed for checking plastic conditions at the potential critical (end) sections of the girders and columns as well as critical conditions of the isolation systems. Unexpected high values of ductility demand are highlighted at the lower floors of all base-isolated structures, while re-centring problems of the base isolation systems under near-fault earthquakes are

EFFECTS OF HEAT STRESS ON BLOOD ACID-BASE BALANCE AND MINERAL CONTENT IN GUINEA FOWLS WHEN DRINKING WATER TREATED WITH MAGNETIC FIELD WAS USED

Directory of Open Access Journals (Sweden)

Beata GŁOWIŃSKA

2011-01-01

Full Text Available The purpose of the study was to examine the effect of 24-hour heat stress on blood acid-base balance parameters and mineral content in guinea fowls when drinking water treated with magnetic field was used. The maximum environmental temperature at the end of the present experiment was 32oC. The relative humidity was maintained at 55% (±2. Blood samples were collected from birds three times: in the 1st, 12th and 24th hour of stress. Exposure to heat stress significantly increased blood bicarbonate ion concentration (HCO3 -, content of buffer alkali (BB and decreased shortage of alkali (BE but only in the 12th hour of stress. In the level of oxygen pressure (pO2 and percentage of oxygen content (O2sat in the 12th and 24th hour of the experiment statistically high significant decrease occurred. In consequence of high environmental temperature the statistically significant decrease of sodium was found. No changes in the level of potassium and chlorine ions in guinea fowls watered magnetized water occurred.

Mineralization dynamics of metakaolin-based alkali-activated cements

International Nuclear Information System (INIS)

Gevaudan, Juan Pablo; Campbell, Kate M.; Kane, Tyler J.; Shoemaker, Richard K.; Srubar, Wil V.

2017-01-01

This paper investigates the early-age dynamics of mineral formation in metakaolin-based alkali-activated cements. The effects of silica availability and alkali content on mineral formation were investigated via X-ray diffraction and solid-state 29 Si magic-angle spinning nuclear magnetic resonance spectroscopy at 2, 7, 14, and 28 days. Silica availability was controlled by using either liquid- (immediate) or solid-based (gradual) sodium silicate supplements. Mineral (zeolitic) and amorphous microstructural characteristics were correlated with observed changes in bulk physical properties, namely shrinkage, density, and porosity. Results demonstrate that, while alkali content controls the mineralization in immediately available silica systems, alkali content controls the silica availability in gradually available silica systems. Immediate silica availability generally leads to a more favorable mineral formation as demonstrated by correlated improvements in bulk physical properties.

Antioxidant Capacity, Mineral Content and Sensory Properties of Gluten-Free Rice and Buckwheat Cookies

Directory of Open Access Journals (Sweden)

Mladenka Pestorić

2015-01-01

Full Text Available Light buckwheat flour was used to substitute rice fl our at the level of 10, 20 and 30 % to produce gluten-free cookies. The substitution of gluten-free cookie formulation with light buckwheat fl our contributed to the signifi cantly higher mineral content, especially magnesium, potassium, iron and copper, in comparison with the control rice cookies (p<0.05. Gluten-free cookies made with rice fl our and buckwheat fl our exhibited signifi cantly higher total phenolic and rutin content, scavenging activity against 1,1-diphenyl 2-picrylhydrazyl radicals (DPPH•, antioxidant activity and reducing power than the control cookies (p<0.05. Comparing all evaluated sensory properties, cookies containing 20 % of light buckwheat flour had the most acceptable sensory properties. The obtained results of principal component analysis showed that the cookies with 20 and 30 % buckwheat flour had better antioxidant and sensory properties in comparison with other two cookie samples.

Utilization of mining and mineral wastes

Energy Technology Data Exchange (ETDEWEB)

Park, Kyung Ho; Hong, Seung Woong; Choi, Young Yoon; Kim, Byung Gyu; Park, Je Shin [Korea Institute of Geology Mining and Materials, Taejon (Korea)

1998-12-01

Up to now, it is estimated that more than 50 million tons of mineral wastes have been generated mining industries and deposited on the land in Korea. Much of cultivated land and hilly areas have been occupied by this wastes, which cause pollution of the environment. Utilization of the mineral wastes is preferable to stabilization because full use would both eliminate the waste and broaden the mineral resource base. Therefore, the development of utilization techniques of mineral wastes is very important not only for improving the environment but also for resource conservation. In countries with high population and poor natural resources like Korea, the utilization of these wastes is essential to decrease the environmental problem and the secure the resources and the study on this field play a important part. Therefore, the objective of this study is to develop the utilization techniques of the mineral wastes. In first year's research, the contents and scope of this study are 1) Present condition and Field Survey on the mineral wastes with respect of their utilization, 2) Reviews of Current effects and research to utilize mineral wastes, 3) Characterization of mineral wastes and environmental test, 4) Evaluation and study on the utilization. (author). 67 refs., 25 tabs., 54 figs.

Utilization of mining and mineral wastes

Energy Technology Data Exchange (ETDEWEB)

Park, Kyung Ho; Hong, Seung Woong; Choi, Young Yoon; Kim, Byung Gyu; Park, Je Shin [Korea Institute of Geology Mining and Materials, Taejon (Korea)

1998-12-01

Up to now, it is estimated that more than 50 million tons of mineral wastes have been generated mining industries and deposited on the land in Korea. Much of cultivated land and hilly areas have been occupied by this wastes, which cause pollution of the environment. Utilization of the mineral wastes is preferable to stabilization because full use would both eliminate the waste and broaden the mineral resource base. Therefore, the development of utilization techniques of mineral wastes is very important not only for improving the environment but also for resource conservation. In countries with high population and poor natural resources like Korea, the utilization of these wastes is essential to decrease the environmental problem and the secure the resources and the study on this field play a important part. Therefore, the objective of this study is to develop the utilization techniques of the mineral wastes. In first year's research, the contents and scope of this study are 1) Present condition and Field Survey on the mineral wastes with respect of their utilization, 2) Reviews of Current effects and research to utilize mineral wastes, 3) Characterization of mineral wastes and environmental test, 4) Evaluation and study on the utilization. (author). 67 refs., 25 tabs., 54 figs.

Bone Mineral Density, Mechanical, Microstructural Properties and Mineral Content of the Femur in Growing Rats Fed with Cactus Opuntia ficus indica (L.) Mill. (Cactaceae) Cladodes as Calcium Source in Diet.

Science.gov (United States)

Hernández-Becerra, Ezequiel; Gutiérrez-Cortez, Elsa; Del Real, Alicia; Rojas-Molina, Alejandra; Rodríguez-García, Mario; Rubio, Efraín; Quintero-García, Michelle; Rojas-Molina, Isela

2017-02-04

Mechanical, microstructural properties, mineral content and bone mineral density (BMD) of the femur were evaluated in growing rats fed with Opuntia ficus indica (L.) Mill. (Cactaceae) cladodes at different maturity stages as calcium source. Male weanling rats were fed with cladodes at early maturity stage (25 and 60 days of age, belonging to groups N-60 and N-200, respectively) and cladodes at late maturity stage (100 and 135 days of age, belonging to groups N-400 and N-600, respectively) for 6 weeks. Additionally, a control group fed with calcium carbonate as calcium source was included for comparative purposes. All diets were fitted to the same calcium content (5 g/kg diet). The failure load of femurs was significantly lower ( p ≤ 0.05) in groups N-60 and N-200 in comparison to N-400, N-600 and control groups. The cortical width (Ct.Wi) and trabecular thickness (Tb.Th) of the femurs in control and N-600 groups were significantly higher ( p ≤ 0.05) than Ct.Wi and Tb.Th of femurs in groups N-60 and N-200. Trabecular separation of the femurs in N-60 and N-200 groups showed the highest values compared with all experimental groups. The highest calcium content in the femurs were observed in control, N-600 and N-400 groups; whereas the lowest phosphorus content in the bones were detected in N-200, N-600 and N-400 groups. Finally, the BMD in all experimental groups increased with age; nevertheless, the highest values were observed in N-600 and control groups during pubertal and adolescence stages. The results derived from this research demonstrate, for the first time, that the calcium found in Opuntia ficus indica cladodes is actually bioavailable and capable of improving mineral density and mechanical and microstructural properties of the bones. These findings suggest that the consumption of cladodes at late maturity stage within the diet might have a beneficial impact on bone health.

Bone Mineral Density, Mechanical, Microstructural Properties and Mineral Content of the Femur in Growing Rats Fed with Cactus Opuntia ficus indica (L. Mill. (Cactaceae Cladodes as Calcium Source in Diet

Directory of Open Access Journals (Sweden)

Ezequiel Hernández-Becerra

2017-02-01

Full Text Available Mechanical, microstructural properties, mineral content and bone mineral density (BMD of the femur were evaluated in growing rats fed with Opuntia ficus indica (L. Mill. (Cactaceae cladodes at different maturity stages as calcium source. Male weanling rats were fed with cladodes at early maturity stage (25 and 60 days of age, belonging to groups N-60 and N-200, respectively and cladodes at late maturity stage (100 and 135 days of age, belonging to groups N-400 and N-600, respectively for 6 weeks. Additionally, a control group fed with calcium carbonate as calcium source was included for comparative purposes. All diets were fitted to the same calcium content (5 g/kg diet. The failure load of femurs was significantly lower (p ≤ 0.05 in groups N-60 and N-200 in comparison to N-400, N-600 and control groups. The cortical width (Ct.Wi and trabecular thickness (Tb.Th of the femurs in control and N-600 groups were significantly higher (p ≤ 0.05 than Ct.Wi and Tb.Th of femurs in groups N-60 and N-200. Trabecular separation of the femurs in N-60 and N-200 groups showed the highest values compared with all experimental groups. The highest calcium content in the femurs were observed in control, N-600 and N-400 groups; whereas the lowest phosphorus content in the bones were detected in N-200, N-600 and N-400 groups. Finally, the BMD in all experimental groups increased with age; nevertheless, the highest values were observed in N-600 and control groups during pubertal and adolescence stages. The results derived from this research demonstrate, for the first time, that the calcium found in Opuntia ficus indica cladodes is actually bioavailable and capable of improving mineral density and mechanical and microstructural properties of the bones. These findings suggest that the consumption of cladodes at late maturity stage within the diet might have a beneficial impact on bone health.

Silicon micro-masonry using elastomeric stamps for three-dimensional microfabrication

International Nuclear Information System (INIS)

Keum, Hohyun; Eisenhaure, Jeffrey D; Kim, Seok; Carlson, Andrew; Ning, Hailong; Mihi, Agustin; Braun, Paul V; Rogers, John A

2012-01-01

We present a micromanufacturing method for constructing microsystems, which we term ‘micro-masonry’ based on individual manipulation, influenced by strategies for deterministic materials assembly using advanced forms of transfer printing. Analogous to masonry in construction sites, micro-masonry consists of the preparation, manipulation, and binding of microscale units to assemble microcomponents and microsystems. In this paper, for the purpose of demonstration, we used microtipped elastomeric stamps as manipulators and built three dimensional silicon microstructures. Silicon units of varied shapes were fabricated in a suspended format on donors, retrieved, delivered, and placed on a target location on a receiver using microtipped stamps. Annealing of the assembled silicon units permanently bound them and completed the micro-masonry procedure. (paper)

Mineral and heavy metal contents of the outer and inner tissues of commonly used fruits.

Science.gov (United States)

Özcan, Mehmet Musa; Harmankaya, Mustafa; Gezgin, Sait

2012-01-01

The rate of heavy metal pollution in some minor fruit samples growing at roadsides in Turkey were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES). The mineral contents of samples were found to be different depending on the several parts Citrus fruits. The highest minor and heavy metal levels for Citrus fruits were determined between 17.24 and 45.30 mg/kg boron, 2.08 and 15.05 mg/kg copper, 1.01 and 16.00 mg/kg iron and 2.35 and 9.87 mg/kg zinc. Boron content ranged from 16.54 mg/kg (Deveci pear inner pulp) to 89.89 mg/kg (Arjantin apple outer skin). The level of Fe ranged from 1.49 mg/kg (quince pulp) to 25.05 mg/kg (Ankara pear pulp). Cu content of fruits ranged between 2.52 mg/kg (Fuji apple skin) and 25.93 mg/kg quince skin). Zn content was found between 0.46 mg/kg (Golden apple pulp) and 14.34 mg/kg (quince skin). P contents ranged from 651 mg/kg (Golden apple pulp) to 1269 mg/kg (quince skin). Na was found between 500 mg/kg (Fuji apple skin) and 907 mg/kg (Arjantin apple skin).

Influence of mineral fillers on the rheological response of polymer-modified bitumens and mastics

Directory of Open Access Journals (Sweden)

F. Cardone

2015-12-01

Full Text Available The rheological properties of the bituminous components (bitumen and bituminous mastic within asphalt mixtures contribute significantly to the major distresses of flexible pavements (i.e. rutting, fatigue and low temperature cracking. Asphalt mixtures are usually composed of mastic-coated aggregates rather than pure bitumen-coated aggregates. The purpose of this study is to investigate the effects of mineral fillers on the rheological behaviour of several polymer-modified bitumens (PMBs through laboratory mixing. A neat bitumen and two types of polymers (elastomeric and plastomeric were used to produce PMBs, and two fillers with different minerals (limestone and basalt were selected to obtain mastics. The dynamic shear rheometer (DSR and bending beam rheometer (BBR were used to characterize the rheological properties of PMBs and mastics. In particular, multiple stress creep recovery (MSCR tests were performed to evaluate the rutting potential at high temperatures, whereas BBR tests were carried out to investigate the low temperature behaviour of these materials. BBR results for unmodified mastics show that the increase of stiffness is similar regardless of the filler type, whereas results for polymer-modified mastics indicate that the degree of stiffening depends on the combination of filler/polymer types. MSCR results show that adding filler leads to a reduced susceptibility of permanent deformation and an enhanced elastic response, depending on the combination of filler/polymer types. Overall results suggest that a physical–chemical interaction between the filler and bitumen occurs, and that the interaction level is highly dependent on the type of polymer modification.

A kinetic study of gaseous potassium capture by coal minerals in a high temperature fixed-bed reactor

DEFF Research Database (Denmark)

Zheng, Yuanjing; Jensen, Peter Arendt; Jensen, Anker Degn

2008-01-01

The reactions between gaseous potassium chloride and coal minerals were investigated in a lab-scale high temperature fixed-bed reactor using single sorbent pellets. The applied coal minerals included kaolin, mullite, silica, alumina, bituminous coal ash, and lignite coal ash that were formed...... into long cylindrical pellets. Kaolin and bituminous coal ash that both have significant amounts of Si and Al show superior potassium capture characteristics. Experimental results show that capture of potassium by kaolin is independent of the gas oxygen content. Kaolin releases water and forms metakaolin...... when heated at temperatures above 450°C. The amounts of potassium captured by metakaolin pellet decreases with increasing reaction temperature in the range of 900-1300°C and increases again with further increasing the temperature up to 1500°C. There is no reaction of pre-made mullite with KCl...

MINERAL INFORMATION EXTRACTION BASED ON GAOFEN-5’S THERMAL INFRARED DATA

Directory of Open Access Journals (Sweden)

L. Liu

2018-04-01

Full Text Available Gaofen-5 carries six instruments aimed at various land and atmosphere applications, and it’s an important unit of China High-resolution Earth Observation System. As Gaofen-5’s thermal infrared payload is similar to that of ASTER, which is widely used in mineral exploration, application of Gaofen-5’s thermal infrared data is discussed regarding its capability in mineral classification and silica content estimation. First, spectra of silicate, carbonate, sulfate minerals from a spectral library are used to conduct spectral feature analysis on Gaofen-5’s thermal infrared emissivities. Spectral indices of band emissivities are proposed, and by setting thresholds of these spectral indices, it can classify three types of minerals mentioned above. This classification method is tested on a simulated Gaofen-5 emissivity image. With samples acquired from the study area, this method is proven to be feasible. Second, with band emissivities of silicate and their silica content from the same spectral library, correlation models have been tried to be built for silica content inversion. However, the highest correlation coefficient is merely 0.592, which is much lower than that of correlation model built on ASTER thermal infrared emissivity. It can be concluded that GF-5’s thermal infrared data can be utilized in mineral classification but not in silica content inversion.

Mineralization dynamics of metakaolin-based alkali-activated cements

Science.gov (United States)

Gevaudan, Juan Pablo; Campbell, Kate M.; Kane, Tyler; Shoemaker, Richard K.; Srubar, Wil V.

2017-01-01

This paper investigates the early-age dynamics of mineral formation in metakaolin-based alkali-activated cements. The effects of silica availability and alkali content on mineral formation were investigated via X-ray diffraction and solid-state 29Si magic-angle spinning nuclear magnetic resonance spectroscopy at 2, 7, 14, and 28 days. Silica availability was controlled by using either liquid- (immediate) or solid-based (gradual) sodium silicate supplements. Mineral (zeolitic) and amorphous microstructural characteristics were correlated with observed changes in bulk physical properties, namely shrinkage, density, and porosity. Results demonstrate that, while alkali content controls the mineralization in immediately available silica systems, alkali content controls the silica availability in gradually available silica systems. Immediate silica availability generally leads to a more favorable mineral formation as demonstrated by correlated improvements in bulk physical properties.

Baxter elastomeric pumps: Feasibility of weight estimates.

Science.gov (United States)

Chambers, Carole R; Pabia, Mica; Sawyer, Michael; Tang, Patricia A

2017-09-01

Purpose Elastomeric pumps are used to infuse a 46-h fluorouracil protocol and patients are asked to visually inspect the pump daily. The pump has a variability of ±10% and there are additional patient variables that can increase this. The feasibility of weighing the pump rather than a visual inspection along with the secondary objective to confirm the pump's variability in real world conditions was undertaken. Methods Empty pumps were weighed using both pharmacy and kitchen scales. Pumps upon completion of the 46-h infusion were also weighed using both pharmacy and kitchen scales. Results The kitchen scale was as accurate as the pharmacy grade scale. Disconnected pumps showed the expected variability from using these infusor pumps along with a few showing greater variability likely due to patient variables. Conclusion Weighing pumps appears to be feasible both at the pharmacy and home level. Next steps would be to weigh pumps during the infusion to validate an alternate method to simple visual inspection for patients to confirm proper infusing of the pump at their home.

Multiple refraction switches realized by stretching elastomeric scatterers in sonic crystals

Directory of Open Access Journals (Sweden)

Y. Huang

2015-02-01

Full Text Available The effect of out-of-plane pre-stretch on the 2D sonic crystal with stretchable elastomeric scatterers is explored. The hyperelastic scatterers are characterized by a compressible neo-Hookean model. The Dirichlet-to-Neumann (DtN map is adopted to obtain the band structure and equi-frequency contours. We focus on the first passband and find that a variety of switching functionalities for refraction behaviors can be realized in selected frequencies under a specific pre-stretch range. These refraction switches enable an active control of wave propagation and are applicable in advanced technologies where switchable and multifunctional sonic crystals are required.

Carbon content of forest floor and mineral soil in Mediterranean Pinus spp. and Oak stands in acid soils in Northern Spain

Energy Technology Data Exchange (ETDEWEB)

Herrero, C.; Turrión, M.B.; Pando, V.; Bravo, F.

2016-07-01

Aim of the study: The aim of the study was to determine the baseline carbon stock in forest floor and mineral soils in pine and oak stands in acid soils in Northern Spain. Area of study: The study area is situated in northern Spain (42° N, 4° W) on “Paramos y Valles” region of Palencia. aterial and methods: An extensive monitoring composed of 48 plots (31 in pine and 17 in oak stands) was carried out. Litter layers and mineral soil samples, at depths of 0-30 cm and 30-60 cm, were taken in each plot. An intensive monitoring was also performed by sampling 12 of these 48 plots selected taken in account species forest composition and their stand development stage. Microbial biomass C (CMB), C mineralization (CRB), and soil organic C balance at stand level were determined in surface soil samples of intensive monitoring. Main results: No differences in soil C content were detected in the two forest ecosystems up to 60 cm depth (53.0±25.8 Mg C ha-1 in Pinus spp. plantations and 60.3±43.8 Mg C ha-1 in oak stands). However, differences in total C (CT), CMB and CRB were found in the upper 10 cm of the soils depending on the stand development stage in each species forest composition (Pinus nigra, Pinus pinaster, Pinus sylvestris and Quercus pyrenaica). Plots with high development stage exhibited significant lower metabolic quotient (qCO2), so, meant more efficient utilization of C by the microbial community. The C content in the forest floor was higher in pine stands (13.7±0.9 Mg C ha-1) than in oak stands (5.4±0.7 Mg C ha-1). A greater turnover time was found in pine ecosystems vs. oak stands. In contrast, forest floor H layer was nonexistent in oak stands. Research highlights: Results about litterfall, forest floor and mineral soil dynamics in this paper can be used strategically to reach environmental goals in new afforestation programs and sustainable forest management approaches. (Author)

Effect of conservation methods on the mineral contents of some ...

African Journals Online (AJOL)

SARAH

2015-10-31

Oct 31, 2015 ... Results: The ash contents of local varieties were better preserved in the granary than in the attic or the jute bag because ... barley, and maize, are important basic foodstuffs in ..... improved high-lysine, high-oil maize for young.

Improved accuracy of cortical bone mineralization measured by polychromatic microcomputed tomography using a novel high mineral density composite calibration phantom

International Nuclear Information System (INIS)

Deuerling, Justin M.; Rudy, David J.; Niebur, Glen L.; Roeder, Ryan K.

2010-01-01

Purpose: Microcomputed tomography (micro-CT) is increasingly used as a nondestructive alternative to ashing for measuring bone mineral content. Phantoms are utilized to calibrate the measured x-ray attenuation to discrete levels of mineral density, typically including levels up to 1000 mg HA/cm 3 , which encompasses levels of bone mineral density (BMD) observed in trabecular bone. However, levels of BMD observed in cortical bone and levels of tissue mineral density (TMD) in both cortical and trabecular bone typically exceed 1000 mg HA/cm 3 , requiring extrapolation of the calibration regression, which may result in error. Therefore, the objectives of this study were to investigate (1) the relationship between x-ray attenuation and an expanded range of hydroxyapatite (HA) density in a less attenuating polymer matrix and (2) the effects of the calibration on the accuracy of subsequent measurements of mineralization in human cortical bone specimens. Methods: A novel HA-polymer composite phantom was prepared comprising a less attenuating polymer phase (polyethylene) and an expanded range of HA density (0-1860 mg HA/cm 3 ) inclusive of characteristic levels of BMD in cortical bone or TMD in cortical and trabecular bone. The BMD and TMD of cortical bone specimens measured using the new HA-polymer calibration phantom were compared to measurements using a conventional HA-polymer phantom comprising 0-800 mg HA/cm 3 and the corresponding ash density measurements on the same specimens. Results: The HA-polymer composite phantom exhibited a nonlinear relationship between x-ray attenuation and HA density, rather than the linear relationship typically employed a priori, and obviated the need for extrapolation, when calibrating the measured x-ray attenuation to high levels of mineral density. The BMD and TMD of cortical bone specimens measured using the conventional phantom was significantly lower than the measured ash density by 19% (p<0.001, ANCOVA) and 33% (p<0.05, Tukey's HSD

Evaluation of the lithology contents and types of clay minerals using downhole spectral analyzer of natural gamma radiation

International Nuclear Information System (INIS)

Zivanov, M.; Savicic, M.; Grbovic, G.

1992-01-01

The microprocessor downhole spectrum analyzer of natural gamma radiation is an important part of the new generation of geophysical well logging systems. This instrument produces complete energy spectra of the penetrated formations. here physical principles of logging are shown. based on the logging results from one of the wells complex lithology was identified, together with shale contents in the formation and types of clay and minerals. (author)

Correlation between the mechanical property and microstructure of porcelain with high alumina contents

International Nuclear Information System (INIS)

Goulart, E.P.; Jordao, M.A.P.; Souza, D.D.D. de; Kiyohara, P.K.

1989-01-01

The substitution of quartz by a alumina in porcelain bodies produces high increase in mechanical strenght of the fired body. In the present paper, body microstruture variations caused by gradual quartz by alumina substitution have been studied and correlated to physical characteristics variations. Several bodies with quartz content varying from 22% to 0% and accordingly, the alumina content varying from 0% to 22% have been prepared. Other quartz-free bodies and the alumina content going up to 40% have been prepared. Three different alumina types have been used: two of them were of microcrystal type, the original crystal size between 1-5μm and obtained by calcining aluminum hydroxide from Bayer process; the third one is an originally macrocrystal type alumina obtained by grinding electrofused material. The sintering temperature ranged from 1250 0 C to 1400 0 C with 50 0 C of intervals between each firing. Tests on specimens covered flexural strenght, water absortion, apparent density and porosity. Microstruture variations and new mineral formation was continuously detected by scanning electron microscopy and X-ray diffraction [pt

A new UV-curing elastomeric substrate for rapid prototyping of microfluidic devices

Science.gov (United States)

Alvankarian, Jafar; Yeop Majlis, Burhanuddin

2012-03-01

Rapid prototyping in the design cycle of new microfluidic devices is very important for shortening time-to-market. Researchers are facing the challenge to explore new and suitable substrates with simple and efficient microfabrication techniques. In this paper, we introduce and characterize a UV-curing elastomeric polyurethane methacrylate (PUMA) for rapid prototyping of microfluidic devices. The swelling and solubility of PUMA in different chemicals is determined. Time-dependent measurements of water contact angle show that the native PUMA is hydrophilic without surface treatment. The current monitoring method is used for measurement of the electroosmotic flow mobility in the microchannels made from PUMA. The optical, physical, thermal and mechanical properties of PUMA are evaluated. The UV-lithography and molding process is used for making micropillars and deep channel microfluidic structures integrated to the supporting base layer. Spin coating is characterized for producing different layer thicknesses of PUMA resin. A device is fabricated and tested for examining the strength of different bonding techniques such as conformal, corona treating and semi-curing of two PUMA layers in microfluidic application and the results show that the bonding strengths are comparable to that of PDMS. We also report fabrication and testing of a three-layer multi inlet/outlet microfluidic device including a very effective fluidic interconnect for application demonstration of PUMA as a promising new substrate. A simple micro-device is developed and employed for observing the pressure deflection of membrane made from PUMA as a very effective elastomeric valve in microfluidic devices.

Determination of Seasonal Vitamin and Mineral Contents of Sea Bream (Sparus aurata L., 1758) Cultured in Net Cages in Central Black Sea Region.

Science.gov (United States)

Öztürk, Dilara Kaya; Baki, Birol; Karayücel, İsmihan; Öztürk, Recep; Gören, Gülşen Uzun; Karayücel, Sedat

2018-05-12

This study aimed to determine the seasonal vitamin and mineral contents of sea bream (Sparus aurata) cultured in net cages in Central Black Sea region. The average seasonal A, D 3 , and E vitamins values in fish meat were between 0.27 ± 0.02-0.60 ± 0.00, 0.98 ± 0.01-1.70 ± 0.00, and 3.10 ± 0.14-6.00 ± 0.21 mg/kg, respectively (p meat were between 276.90 ± 0.99-1788.50 ± 51.27 (p  0.05), 4244.50 ± 8.84-4761.50 ± 1.06 (p  0.05), respectively. As a result, it can be concluded that sea bream cultured in the Central Black Sea region is a rich source of nutrients in terms of vitamins and mineral matters, and fish size, feed quality, and the environmental factors are influential on the contents of vitamin and mineral substances in the fish tissue.

Comparative Evaluation of Dimensional Accuracy of Elastomeric Impression Materials when Treated with Autoclave, Microwave, and Chemical Disinfection.

Science.gov (United States)

Kamble, Suresh S; Khandeparker, Rakshit Vijay; Somasundaram, P; Raghav, Shweta; Babaji, Rashmi P; Varghese, T Joju

2015-09-01

Impression materials during impression procedure often get infected with various infectious diseases. Hence, disinfection of impression materials with various disinfectants is advised to protect the dental team. Disinfection can alter the dimensional accuracy of impression materials. The present study was aimed to evaluate the dimensional accuracy of elastomeric impression materials when treated with different disinfectants; autoclave, chemical, and microwave method. The impression materials used for the study were, dentsply aquasil (addition silicone polyvinylsiloxane syringe and putty), zetaplus (condensation silicone putty and light body), and impregum penta soft (polyether). All impressions were made according to manufacturer's instructions. Dimensional changes were measured before and after different disinfection procedures. Dentsply aquasil showed smallest dimensional change (-0.0046%) and impregum penta soft highest linear dimensional changes (-0.026%). All the tested elastomeric impression materials showed some degree of dimensional changes. The present study showed that all the disinfection procedures produce minor dimensional changes of impression material. However, it was within American Dental Association specification. Hence, steam autoclaving and microwave method can be used as an alternative method to chemical sterilization as an effective method.

Mechanics of nanowire/nanotube in-surface buckling on elastomeric substrates

Energy Technology Data Exchange (ETDEWEB)

Xiao, J; Huang, Y [Department of Mechanical Engineering, Northwestern University, Evanston, IL 60208 (United States); Ryu, S Y; Paik, U [Division of Materials Science and Engineering, Hanyang University, 17 Hangdang-dong, Sungdong-gu, Seoul 133-791 (Korea, Republic of); Hwang, K-C [Department of Engineering Mechanics, Tsinghua University, Beijing 100084 (China); Rogers, J A, E-mail: y-huang@northwestern.edu, E-mail: jrogers@uiuc.edu [Department of Materials Science and Engineering, Frederick-Seitz Materials Research Laboratory and Beckman Institute, University of Illinois at Urbana-Champaign, Illinois 61801 (United States)

2010-02-26

A continuum mechanics theory is established for the in-surface buckling of one-dimensional nanomaterials on compliant substrates, such as silicon nanowires on elastomeric substrates observed in experiments. Simple analytical expressions are obtained for the buckling wavelength, amplitude and critical buckling strain in terms of the bending and tension stiffness of the nanomaterial and the substrate elastic properties. The analysis is applied to silicon nanowires, single-walled carbon nanotubes, multi-walled carbon nanotubes, and carbon nanotube bundles. For silicon nanowires, the measured buckling wavelength gives Young's modulus to be 140 GPa, which agrees well with the prior experimental studies. It is shown that the energy for in-surface buckling is lower than that for normal (out-of-surface) buckling, and is therefore energetically favorable.

Mechanics of nanowire/nanotube in-surface buckling on elastomeric substrates

International Nuclear Information System (INIS)

Xiao, J; Huang, Y; Ryu, S Y; Paik, U; Hwang, K-C; Rogers, J A

2010-01-01

A continuum mechanics theory is established for the in-surface buckling of one-dimensional nanomaterials on compliant substrates, such as silicon nanowires on elastomeric substrates observed in experiments. Simple analytical expressions are obtained for the buckling wavelength, amplitude and critical buckling strain in terms of the bending and tension stiffness of the nanomaterial and the substrate elastic properties. The analysis is applied to silicon nanowires, single-walled carbon nanotubes, multi-walled carbon nanotubes, and carbon nanotube bundles. For silicon nanowires, the measured buckling wavelength gives Young's modulus to be 140 GPa, which agrees well with the prior experimental studies. It is shown that the energy for in-surface buckling is lower than that for normal (out-of-surface) buckling, and is therefore energetically favorable.

Radiation situation during underground mineral raw materials mining

International Nuclear Information System (INIS)

Ogorodnikov, B.I.

2007-01-01

One studied the content and the ratio of 4 0 K, 226 Ra, 232 Th and 238 U natural radionuclides in the ores mined in Egypt, Iran, China and Turkey. It is shown that in some ores, for example, in the carbonaceous shale mined in China, in the Iranian bauxite and turquoise Ra eq is higher than 370 Bq/kg, that is, it is higher than the value recommended by the International Scientific Committee on Radiation Effect. The Chinese bituminous shale shows high content of 226 Ra, while 226 Ra/ 232 Th concentration ratio varies between 10 and 60 in contrast to that of other numerous mineral raw materials being close to 1-3. In a number of mines one recorded high concentrations of radon (higher than 300 Bq/m 3 ). Inhalation of such an air results in the essential internal irradiation. The average annual dose equivalents for miners may be higher than the maximum permissible value equal to 20 mSv/g [ru

Mineral and Nutrient Leaf Composition of Two Cassava (Manihot esculenta Crantz Cultivars Defoliated at Varying Phenological Phases

Directory of Open Access Journals (Sweden)

Oyeyemi Adigun DADA

2010-12-01

Full Text Available The effect of defoliation on mineral and food value of two cassava varieties defoliated at varying phenological phases was studied to ascertain the appropriate phenological phase when harvested leaves would contain the optimum mineral and proximate composition, gross energy and the least cyanide content. Two cassava cultivars were subjected to defoliation at varying phenological stages including logarithmic, vegetative and physiological maturity phases. The mineral content was highest at the logarithmic phase than any other phases. The proximate composition of the cassava leaves showed that crude protein was highest at physiological maturity, while the least HCN was observed in cassava defoliated at logarithmic phase. Analysis of mineral and proximate content showed that leaf of the �TMS30572� cultivar had the highest mineral content, fat, fibre, ash, dry matter and gross energy at the logarithm phase while �Oko-Iyawo� had the highest crude protein and HCN at physiological maturity. This study indicates the high potential of cassava leaf as an unconventional source of protein for both humans and animals when defoliated at logarithmic growth phase.

The influence of organic substances type on the properties of mineral-organic fertilizers

Science.gov (United States)

Huculak-Mä Czka, Marta; Hoffmann, Krystyna; Hoffmann, Józef

2010-05-01

In presented research the lignite coal, peat, poultry droppings and their composts were suggested as a components of mineral-organic fertilizers. Fertility of soil is conditioned by an ability to supply plants with water and nutrients essential to their growth and development. The soil is described as tri-phase system consisting of solid, liquid and gas phase. In solid phase the soil minerals and organic matter can be distinguished. The content of micro-organisms contained in the soil i.e. microfauna and microflora is indispensable for high soil fertility. Nutrients should occur in the forms available for plants in order to obtain high yields of the high quality crops. Organic fertilizing has versatile activity. Increasing contents of humus, providing mineral nutrients included in organic substance and the improvement in physical properties of the soil belong to its main purposes. Due to applying organic fertilizers heavy soils is getting loosen and in consequence become more airy what probably influences stimulation of soil micro-organisms activity. An aqueous as well as sorption capacity of light soils is also increasing, buffer range and the stabilization of the proper level of pH value of the soil, plants are provided with basic macro and micronutrients. Conventional organic fertilizers applied in an arable farms are manure, dung, green manures and composts of different kind. Within compost group the following types can be distinguished: compost from farming, urban wastes, shredded straw, poultry droppings, industrial wastes, bark of coniferous tree etc. Properly developed fertilizer formulas should contain in their composition both mineral as well as organic elements. Such fertilizer should fit its composition to the soil and plant requirements. It should contain organic substance being characterized by a high aqueous and cations sorption capacity, substance undergoing the fast mineralization with the large calcium content. Inorganic substances e.g. bentonites

NIR spectroscopy for the quality control of Moringa oleifera (Lam.) leaf powders: Prediction of minerals, protein and moisture contents.

Science.gov (United States)

Rébufa, Catherine; Pany, Inès; Bombarda, Isabelle

2018-09-30

A rapid methodology was developed to simultaneously predict water content and activity values (a w ) of Moringa oleifera leaf powders (MOLP) using near infrared (NIR) signatures and experimental sorption isotherms. NIR spectra of MOLP samples (n = 181) were recorded. A Partial Least Square Regression model (PLS2) was obtained with low standard errors of prediction (SEP of 1.8% and 0.07 for water content and a w respectively). Experimental sorption isotherms obtained at 20, 30 and 40 °C showed similar profiles. This result is particularly important to use MOLP in food industry. In fact, a temperature variation of the drying process will not affect their available water content (self-life). Nutrient contents based on protein and selected minerals (Ca, Fe, K) were also predicted from PLS1 models. Protein contents were well predicted (SEP of 2.3%). This methodology allowed for an improvement in MOLP safety, quality control and traceability. Published by Elsevier Ltd.

Trace mineral interactions during elevated calcium consumption

International Nuclear Information System (INIS)

Smith, K.T.; Luhrsen, K.R.

1986-01-01

Elevated calcium consumption is reported to affect trace mineral bioavailability. The authors examined this phenomenon in both single dose radio-label test meals and an eight week feeding trial in rats. In the single dose studies, human milk, cows milk, and various calcium sources were examined in relation to radio-iron and radio-zinc retention. 59 Fe retention was greater from human milk than cows milk. However, when the calcium content of human milk was adjusted (with CaHPO 4 or CaCO 3 ) to equal the level in cows milk, iron retention was depressed. Similarly, when calcium sources (CaCO 3 , CaHPO 4 , hydroxy-apatite, bone meal) were examined at different calcium:metal molar ratios, the degree of inhibition on metal retention varied. In general, phosphate salts were more inhibiting than carbonates. In the feeding trial, calcium was fed in diets at normal (0.5%) or elevated (1.5%) levels. Serum, liver, kidney, and bone trace mineral profiles were obtained. In general, most trace elements showed decreased levels in the tissues. Zinc and iron were most striking, followed by magnesium with minor changes in copper. A high calcium:high mineral supplemented group was also fed. Mixed mineral supplementation prevented all calcium interactions. These data indicate the importance of calcium mineral interactions in bioavailability considerations in both milk sources and in mineral supplementation

Characterization of protein, lipid and mineral contents in common Norwegian seaweeds and evaluation of their potential as food and feed.

Science.gov (United States)

Maehre, Hanne K; Malde, Marian K; Eilertsen, Karl-Erik; Elvevoll, Edel O

2014-12-01

The objectives of this study were to examine protein and amino acid composition, lipid and fatty acid composition, along with a range of essential minerals in common Norwegian seaweed species representing the red (Palmaria palmata and Vertebrata lanosa), green (Cladophora rupestris, Enteromorpha intestinalis and Ulva lactuca) and brown (Alaria esculenta, Laminaria digitata, Laminaria hyperborea, Fucus vesiculosus and Pelvetia canaliculata) classes and assess their potential as alternatives to cereals in food and feed. As macroalgae accumulate heavy metals, arsenic, cadmium and mercury were also analyzed. Proteins ranged from 34 to 123 g kg(-1) dry weight (DW) and the essential amino acid levels may cover both human and salmonid requirements. Lipids were low (6-58 g kg(-1) DW), but the red algae had high relative content of long-chained omega-3 fatty acids (32-34 % of the fatty acids). Iodine contents were particularly high in the Laminaria species. Of the heavy metals only arsenic levels may be of concern. In total, the red alga P. palmata was regarded as the best alternative to cereals in food and feed. For several of the other species, single-component extraction for the ingredients market may be better than using the whole product. © 2014 Society of Chemical Industry.

Mineral sources and transport pathways for arsenic release in a coastal watershed, USA

Science.gov (United States)

Foley, Nora K.; Ayuso, Robert A.

2008-01-01

Metasedimentary bedrock of coastal Maine contains a diverse suite of As-bearing minerals that act as significant sources of elements found in ground and surface waters in the region. Arsenic sources in the Penobscot Formation include, in order of decreasing As content by weight: löllingite and realgar (c.70%), arsenopyrite, cobaltite, glaucodot, and gersdorffite (in the range of 34–45%), arsenian pyrite (Formation, the relative stability of primary As-bearing minerals follows a pattern where the most commonly observed highly altered minerals are pyrrhotite, realgar, niccolite, löllingite > glaucodot, arsenopyrite-cobaltian > arsenopyrite, cobaltite, gersdorffite, fine-grained pyrite, Ni-pyrite > coarse-grained pyrite. Reactions illustrate that oxidation of Fe-As disulphide group and As-sulphide minerals is the primary release process for As. Liberation of As by carbonation of realgar and orpiment in contact with high-pH groundwaters may contribute locally to elevated contents of As in groundwater, especially where As is decoupled from Fe. Released metals are sequestered in secondary minerals by sorption or by incorporation in crystal structures. Secondary minerals acting as intermediate As reservoirs include claudetite (c.75%), orpiment (61%), scorodite (c. 45%), secondary arsenopyrite (c. 46%), goethite (minerals. Reductive dissolution of Fe-oxide minerals may govern the ultimate release of iron and arsenic – especially As(V) – to groundwater; however, dissolution of claudetite (arsenic trioxide) may directly contribute As(III). Processes thought to explain the release of As from minerals in bedrock include oxidation of arsenian pyrite or arsenopyrite, or carbonation of As-sulphides, and most models based on these generally rely on discrete minerals or on a fairly limited series of minerals. In contrast, in the Penobscot Formation and other metasedimentary rocks of coastal Maine, oxidation of As-bearing Fe-cobalt-nickel-sulphide minerals, dissolution (by

The relationships among total body fat, bone mineral content and bone marrow adipose tissue in early-pubertal girls

OpenAIRE

L Newton, Anna; J Hanks, Lynae; Davis, Michelle; Casazza, Krista

2013-01-01

Investigation of the physiologic relevance of bone marrow adipose tissue (BMAT) during growth may promote understanding of the bone-fat axis and confluence with metabolic factors. The objective of this pilot investigation was two-fold: (1) to evaluate the relationships among total body fat, bone mineral content (BMC) and femoral BMAT during childhood and underlying metabolic determinants and (2) to determine if the relationships differ by race. Participants included white and non-Hispanic bla...

Evaluation of the mineral content of peripheral bones (radius) by photon-absorption technique in normals as well as in patients with various types of bone diseases

Energy Technology Data Exchange (ETDEWEB)

Runge, H.; Fengler, F.; Franke, J.; Koall, W.

1980-10-01

The evaluation of the mineral content of peripheral bones by measuring the photon absorption of the radius has proven to be a valuable method for routine clinical work: for diagnosis, follow-up and control of therapy. While there was a significant difference in the findings of normal persons compared with those of patients suffering from osteoporosis, renal osteodystrophy, osteogenesis imperfecta and skeletal fluorosis, there was no difference between normals and these patients suffering from Bechterew, Scheuermann, coxarthrosis, spondylosis, skoliosis and rheumatoid arthritis. Normal values for the mineral content and the width of the radius at the junction of the middle and lower third - based on 8000 examinations - are mentioned.

Evaluation of the mineral content of peripheral bones (radius) by photon-absorption technique in normals as well as in patients with various types of bone diseases

International Nuclear Information System (INIS)

Runge, H.; Fengler, F.; Franke, J.; Koall, W.

1980-01-01

The evaluation of the mineral content of peripheral bones by measuring the photon absorption of the radius has proven to be a valuable method for routine clinical work: for diagnosis, follow-up and control of therapy. While there was a significant difference in the findings of normal persons compared with those of patients suffering from osteoporosis, renal osteodystrophy, osteogenesis imperfecta and skeletal fluorosis, there was no difference between normals and these patients suffering from Bechterew, Scheuermann, coxarthrosis, spondylosis, skoliosis and rheumatoid arthritis. Normal values for the mineral content and the width of the radius at the junction of the middle and lower third - based on 8000 examinations - are mentioned. (orig.) [de

Fabrication, characterization, and biocompatibility assessment of a novel elastomeric nanofibrous scaffold: A potential scaffold for soft tissue engineering

DEFF Research Database (Denmark)

Shamirzaei Jeshvaghani, Elham; Ghasemi-Mobarakeh, Laleh; Mansurnezhad, Reza

2017-01-01

With regard to flexibility and strength properties requirements of soft biological tissue, elastomeric materials could be more beneficial in soft tissue engineering applications. The present work investigates the use of an elastic polymer, (polycaprolactone fumarate [PCLF]), for fabricating...... experiments and its application for engineering of soft tissues subjected to in vivo cyclic mechanical stresses....

A facile in vitro model to study rapid mineralization in bone tissues.

Science.gov (United States)

Deegan, Anthony J; Aydin, Halil M; Hu, Bin; Konduru, Sandeep; Kuiper, Jan Herman; Yang, Ying

2014-09-16

Mineralization in bone tissue involves stepwise cell-cell and cell-ECM interaction. Regulation of osteoblast culture microenvironments can tailor osteoblast proliferation and mineralization rate, and the quality and/or quantity of the final calcified tissue. An in vitro model to investigate the influencing factors is highly required. We developed a facile in vitro model in which an osteoblast cell line and aggregate culture (through the modification of culture well surfaces) were used to mimic intramembranous bone mineralization. The effect of culture environments including culture duration (up to 72 hours for rapid mineralization study) and aggregates size (monolayer culture as control) on mineralization rate and mineral quantity/quality were examined by osteogenic gene expression (PCR) and mineral markers (histological staining, SEM-EDX and micro-CT). Two size aggregates (on average, large aggregates were 745 μm and small 79 μm) were obtained by the facile technique with high yield. Cells in aggregate culture generated visible and quantifiable mineralized matrix within 24 hours, whereas cells in monolayer failed to do so by 72 hours. The gene expression of important ECM molecules for bone formation including collagen type I, alkaline phosphatase, osteopontin and osteocalcin, varied temporally, differed between monolayer and aggregate cultures, and depended on aggregate size. Monolayer specimens stayed in a proliferation phase for the first 24 hours, and remained in matrix synthesis up to 72 hours; whereas the small aggregates were in the maturation phase for the first 24 and 48 hour cultures and then jumped to a mineralization phase at 72 hours. Large aggregates were in a mineralization phase at all these three time points and produced 36% larger bone nodules with a higher calcium content than those in the small aggregates after just 72 hours in culture. This study confirms that aggregate culture is sufficient to induce rapid mineralization and that aggregate

The effect of soll water conditions on carbon isotope discrimination and minerals contents in spring-planted wheat

International Nuclear Information System (INIS)

Zhu Lin; Liang Zongsuo; Xu Xing; Li Shuhua

2008-01-01

Carbon isotope discrimination (triangle open 13 C) has been proposed as indirect selection criterion for transpiration efficiency and grain yield in wheat. However, because of high cost for triangle open 13 C analysis, attempts have been made to identify alternative screening criteria. Ash content (m a ) has been proposed as an alternative criterion for triangle open 13 C in wheat and barley. A pot experiment with three water treatments (45% ± 5% FC, 55% ± 5% FC and 75% ± 5%FC) was conducted and flag leaf triangle open 13 C (triangle openL a ), contents of ash, potassium (K), magnesium (Mg) and calcium (Ca) were measured to study the relationships between triangle open, mineral composition in spring planted bread wheat (Triticum aestivum L.). In the light of the results obtained in this research, the traits measured showed significant differences among the three water treatments. There were variations in triangle openL a between the genotypes derived from contrasting environments. The improved varieties or advanced lines bred in irrigated areas displayed higher triangle open 13 C values, while the improved and local varieties bred in rain-fed areas exhibited lower triangle open 13 C values Significant positive correlations were found between triangle open 13 C and m a in seedlings and second fully developed leaves at elongation stage and in flag leaves at anthesis stage in severe drought treatment (T 1 ) (r=0.790, P 13 C was negatively associated with potassium (K) content in flag leaves in T 2 (r=0.813, P 2 and T 3 (r=0.725, P 13 C and calcium (Ca) content in flag leaves in T 3 (r=0.708, P a is a possible alternative criterion of triangle open 13 C in vegetative organs especially in stressed environments. K, Mg and Ca contents in flag leaf under moderate water stress or feasible water conditions might be new predictive criteria of triangle openL a . (authors)

Evaluation of mineral contents in Cleome gynandra leaves and ...

African Journals Online (AJOL)

Cleome gynandra is an herbal plant highly consumed and appreciated by populations from Burkina Faso and other parts of Africa. Two samples of Cleome gynandra were collected and submitted to a comparative analysis by ICP-AES to determine the content of nutritive and toxic elements in leaves and stalks as fresh or ...

Measurement of lumbar spine bone mineral content using dual photon absorptiometry. Usefulness in metabolic bone diseases

International Nuclear Information System (INIS)

Delmas, P.D.; Duboeuf, F.; Braillon, P.; Meunier, P.J.

1988-01-01

Measurement of bone density using an accurate, non-invasive method is a crucial step in the clinical investigation of metabolic bone diseases, especially osteoporosis. Among the recently available techniques, measurement of lumbar spine bone mineral content (BMC) using dual photon absorptiometry appears as the primary method because it is simple, inexpensive, and involves low levels of radiation exposure. In this study, we measured the BMC in 168 normal adults and 95 patients. Results confirmed the good reproducibility and sensitivity of this technique for quantifying bone loss in males and females with osteoporosis. Significant bone loss was found in most females with primary hyperparathyroidism. Dual photon absorptiometry can also be used for quantifying increases in bone mass in Paget disease of bone and diffuse osteosclerosis. Osteomalacia is responsible for a dramatic fall in BMC reflecting lack of mineralization of a significant portion of the bone matrix, a characteristic feature in this disease. Furthermore, in addition to being useful for diagnostic purposes and for evaluation of the vertebral fracture risk, lumbar spine absorptiometry can be used for monitoring the effectiveness of bone-specific treatments [fr

Measurement of lumbar spine bone mineral content using dual photon absorptiometry. Usefulness in metabolic bone diseases

Energy Technology Data Exchange (ETDEWEB)

Delmas, P.D.; Duboeuf, F.; Braillon, P.; Meunier, P.J.

1988-06-02

Measurement of bone density using an accurate, non-invasive method is a crucial step in the clinical investigation of metabolic bone diseases, especially osteoporosis. Among the recently available techniques, measurement of lumbar spine bone mineral content (BMC) using dual photon absorptiometry appears as the primary method because it is simple, inexpensive, and involves low levels of radiation exposure. In this study, we measured the BMC in 168 normal adults and 95 patients. Results confirmed the good reproducibility and sensitivity of this technique for quantifying bone loss in males and females with osteoporosis. Significant bone loss was found in most females with primary hyperparathyroidism. Dual photon absorptiometry can also be used for quantifying increases in bone mass in Paget disease of bone and diffuse osteosclerosis. Osteomalacia is responsible for a dramatic fall in BMC reflecting lack of mineralization of a significant portion of the bone matrix, a characteristic feature in this disease. Furthermore, in addition to being useful for diagnostic purposes and for evaluation of the vertebral fracture risk, lumbar spine absorptiometry can be used for monitoring the effectiveness of bone-specific treatments.

Bone mineral content in the spongiosa of the lumbar spine of healthy perimenopausal women measured by QCT

International Nuclear Information System (INIS)

Montag, M.; Meyer-Galander, H.M.; Peters, P.E.; Doeren, M.; Montag, T.

1988-01-01

Healthy perimenopausal women (152) were examined by QCT to quantify the mineral content of the axial skeleton. The density was measured in the spongiosa of the L 2-4, using single energy technique and the Cann-Genant calibration phantom. The women, aged 37 to 64, had no history of pathological fractures, ovariectomy, metabolic disease, or hormone therapy. The age-related mean values were 25 mg K2HP04/cm 3 lower than the normal values reported by Genant et al. for 203 healthy American women. The 95% confidence interval was distinctly narrower (±40 mg/cm 3 ) than the American confidence interval (±60 mg/cm 3 ). To evaluate the relationship of the BMC to mechanical stress, the BMC was compared with body weight, body mass index (weight/height 2 ), and the lumbar muscle mass was estimated from cross sections of the paravertebral muscles in the CT images. The assumption that higher mechanical stress results in higher bone mineralization could not be confirmed. (orig.) [de

Mineral composition of pastures and mineral deficiencies in cattle of some properties in Middle Paraiba, RJ, Brazil

Directory of Open Access Journals (Sweden)

Ana Paula Lopes Marques

2014-01-01

Full Text Available ABSTRACT. Marques A.P.L., Botteon R.C.C.M., Amorim E.B., Botteon P.T.L &Zonta E. [Mineral composition of pastures and mineral deficiencies in cattle of some properties in Middle Paraiba, RJ, Brazil.] Composição mineral das pastagens e deficiências minerais dos bovinos em algumas propriedades da região do Médio Paraíba, RJ, Brasil. Revista Brasileira de Medicina Veterinária, 36(1:71-78, 2014. Departamento de Medicina e Cirurgia Veterinária, Universidade Federal Rural do Rio de Janeiro, BR 465 Km 7, Seropédica, RJ 23851-900, Brasil. E-mail: marquesapl@ufrrj.br We studied levels and nutrient availability in the soil and grazing of cattle in Middle Paraíba, RJ, Brazil in the early dry season (May-June and rainy (November-December in seven cattle herds with a history of clinical deficiencies of Na, Cu, Co and P, identified through visits to farmers. The mineral contents in the samples were determined by atomic absorption spectrophotometry and values obtained were compared with clinical signs found. Low values of P and Na were confirmed and although the lack of Ca and Mg is uncommon, some samples showed low rates. We found high values of Fe with possible interference in the absorption of Cu, the main clinical deficiency identified in the region, and high values of Al, Zn and Mn. The results indicate that most mineral deficiencies diagnosed in those herds is due to antagonistic effects of minerals that are not deficient.

Plaque retention by self-ligating vs elastomeric orthodontic brackets: quantitative comparison of oral bacteria and detection with adenosine triphosphate-driven bioluminescence.

NARCIS (Netherlands)

Pellegrini, P.; Sauerwein, R.W.; Finlayson, T.; McLeod, J.; Covell, D.A.; Maier, T.; Machida, C.A.

2009-01-01

INTRODUCTION: Enamel decalcification is a common problem in orthodontics. The objectives of this randomized clinical study were to enumerate and compare plaque bacteria surrounding 2 bracket types, self-ligating (SL) vs elastomeric ligating (E), and to determine whether adenosine triphosphate

High-strength mineralized collagen artificial bone

Science.gov (United States)

Qiu, Zhi-Ye; Tao, Chun-Sheng; Cui, Helen; Wang, Chang-Ming; Cui, Fu-Zhai

2014-03-01

Mineralized collagen (MC) is a biomimetic material that mimics natural bone matrix in terms of both chemical composition and microstructure. The biomimetic MC possesses good biocompatibility and osteogenic activity, and is capable of guiding bone regeneration as being used for bone defect repair. However, mechanical strength of existing MC artificial bone is too low to provide effective support at human load-bearing sites, so it can only be used for the repair at non-load-bearing sites, such as bone defect filling, bone graft augmentation, and so on. In the present study, a high strength MC artificial bone material was developed by using collagen as the template for the biomimetic mineralization of the calcium phosphate, and then followed by a cold compression molding process with a certain pressure. The appearance and density of the dense MC were similar to those of natural cortical bone, and the phase composition was in conformity with that of animal's cortical bone demonstrated by XRD. Mechanical properties were tested and results showed that the compressive strength was comparable to human cortical bone, while the compressive modulus was as low as human cancellous bone. Such high strength was able to provide effective mechanical support for bone defect repair at human load-bearing sites, and the low compressive modulus can help avoid stress shielding in the application of bone regeneration. Both in vitro cell experiments and in vivo implantation assay demonstrated good biocompatibility of the material, and in vivo stability evaluation indicated that this high-strength MC artificial bone could provide long-term effective mechanical support at human load-bearing sites.

Progress in photon absorptiometric determination of bone mineral and body composition

International Nuclear Information System (INIS)

Mazess, R.B.; Witt, R.M.; Peppler, W.W.; Hanson, J.A.

1976-01-01

Single-photon absorptiometry, with low energy radionuclides, has become widely accepted for measurement of bone mineral content in vivo. Dual-photon absorptiometry is a newer approach which overcomes previous limitations and allows measurement of total body and spinal bone mineral with high accuracy and precision (2 percent error). Dual-photon absorptiometry also permits measurement of the lean-fat composition of soft-tissue and the monitoring of shifts in body composition and/or fluid balance

Quasi-Static Behavior of Palm-Based Elastomeric Polyurethane: For Strengthening Application of Structures under Impulsive Loadings

Directory of Open Access Journals (Sweden)

H. M. Chandima Chathuranga Somarathna

2016-05-01

Full Text Available In recent years, attention has been focused on elastomeric polymers as a potential retrofitting material considering their capability in contributing towards the impact resistance of various structural elements. A comprehensive understanding of the behavior and the morphology of this material are essential to propose an effective and feasible alternative to existing structural strengthening and retrofitting materials. This article presents the findings obtained from a series of experimental investigations to characterize the physical, mechanical, chemical and thermal behavior of eight types of palm-based polyurethane (PU elastomers, which were synthesized from the reaction between palm kernel oil-based monoester polyol (PKO-p and 4,4-diphenylmethane diisocyanate (MDI with polyethylene glycol (PEG as the plasticizer via pre-polymerization. Fourier transform infrared (FT-IR spectroscopy analysis was conducted to examine the functional groups in PU systems. Mechanical and physical behavior was studied with focus on elongation, stresses, modulus, energy absorption and dissipation, and load dispersion capacities by conducting hardness, tensile, flexural, Izod impact, and differential scanning calorimetry tests. Experimental results suggest that the palm-based PU has positive effects as a strengthening and retrofitting material against dynamic impulsive loadings both in terms of energy absorption and dissipation, and load dispersion. In addition, among all PUs with different plasticizer contents, PU2 to PU8 (which contain 2% to 8% (w/w PEG with respect to PKO-p content show the best correlation with mechanical response under quasi-static conditions focusing on energy absorption and dissipation and load dispersion characteristics.

Trace elements in rock phosphates and P containing mineral and organo-mineral fertilizers sold in Germany

Energy Technology Data Exchange (ETDEWEB)

Kratz, Sylvia, E-mail: sylvia.kratz@jki.bund.de; Schick, Judith; Schnug, Ewald

2016-01-15

68 rock phosphates and 162 P containing (organo-)mineral fertilizers sold in Germany were evaluated with regard to trace element contents. While Al, As, B, Be, Cd, Cr, Mo, Ni, Pb, Sb, Se, Tl, U, and Zn were higher in sedimentary than in igneous rock phosphates, the opposite was true for Co, Cu, Sn, Mn, Ti, Fe, and Sr. Comparing element concentrations to the currently valid legal limit values defined by the German Fertilizer Ordinance, it was found that some PK and many straight P fertilizers (superphosphate, triple superphosphate, partly acidulated rock phosphates) exceeded the limit of 50 mg Cd/kg P{sub 2}O{sub 5}. Mean values for As, Ni, Pb, and Tl remained below legal limits in almost all cases. While no legal limit has been defined for U in Germany yet, the limit of 50 mg U/kg P{sub 2}O{sub 5} for P containing fertilizers proposed by the German Commission for the Protection of Soils was clearly exceeded by mean values for all fertilizer types analyzed. A large share of the samples evaluated in this work contained essential trace elements at high concentrations, with many of them not being declared as such. Furthermore, trace elements supplied with these fertilizers at a fertilization rate leveling P uptake would exceed trace element uptake by crops. This may become most relevant for B and Fe, since many crops are sensitive to an oversupply of B, and Fe loads exceeding plant uptake may immobilize P supplies for the crops by forming Fe phosphate salts. The sample set included two products made from thermochemically treated sewage sludge ash. The products displayed very high concentrations of Fe and Mn and exceeded the legal limit for Ni, emphasizing the necessity to continue research on heavy metal removal from recycled raw materials and the development of environmentally friendly and agriculturally efficient fertilizer products. - Highlights: • Mineral fertilizers (MF) sold in Germany often exceed legal limits for Cd • MF sold in Germany contain high

Relationship between refractive index and mineral content of enamel and dentin using SS-OCT and TMR

Science.gov (United States)

Hariri, Ilnaz; Sadr, Alireza; Shimada, Yasushi; Nakashima, Syozi; Sumi, Yasunori; Tagami, Junji

2012-01-01

The aim of this work was to investigate relationship between refractive index (n) and mineral content (MC) (vol %) of enamel and dentin using swept-source optical coherence tomography (SS-OCT) and transverse microradiography (TMR). Enamel and dentin blocks were partitioned into three regions. The middle partition of each sample was covered with a nail polish to protect the sound area during exposure to the treatment solutions. Samples were demineralized in a demineralizing solution, which was refreshed once a week, for 2 months. One window was covered with acid-resistant varnish, leaving the other window exposed; the samples were placed in a solution for remineralization. Samples then were sliced into disks with thickness of 300 μm to 400 μm and placed on metal plate in order to capture cross-sectional images of sound, demineralized and remineralized regions by OCT at 1319 nm center wavelength. The n then was calculated via formula using image analysis software. Following n measurement, these specimens were further polished for the TMR analysis. Correlation between OCT n and TMR MC was examined. A significant and highly positive correlation was found between the measured n and the actual MC at the corresponding locations (Pearson correlation coefficients (r) were 0.94 and 0.97 in enamel and 0.95 and 0.91 in dentin after de-/remineralization process, respectively p < 0.05). OCT showed a potential for quantitative analysis of the mineral loss or gain by measuring of the n in vitro. Supported by the grant from the Japanese Ministry of Education, Global Center of Excellence (GCOE) Program, "International Research Center for Molecular Science in Tooth and Bone Diseases."

In vitro dialyzability of essential minerals from white and whole grain pasta.

Science.gov (United States)

Vignola, María Belén; Bustos, Mariela Cecilia; Pérez, Gabriela Teresa

2018-11-01

The aim of the present investigation was to study the in vitro mineral dialyzability of pasta made with white and whole-grain flours obtained from two genotypes (Klein Guerrero and Baguette Premium 11) with different mineral contents. Pasta samples were made from white flour (FP), and whole grain flour from cyclonic mill (WFAP) and blade mill (WFBP). Mineral content and in vitro digestion were determined on all samples to study starch variation and mineral dialyzability. Whole-grain pasta contained significantly higher amounts of minerals than FP, since bran and embryo are richer in minerals than endosperm. In addition to the low content of mineral composition observed in FP, the dialyzability of some minerals (Cu, Fe, Mg and Zn) was higher than whole-grain pasta even when the percentage of starch hydrolyzed after intestinal digestion was higher than FP. These results can also be useful for developing wheat-based products rich in the desired minerals. Copyright © 2018 Elsevier Ltd. All rights reserved.

Low-level laser therapy effects on pain perception related to the use of orthodontic elastomeric separators

Directory of Open Access Journals (Sweden)

Rachel D'Aurea Furquim

2015-06-01

Full Text Available INTRODUCTION: Some patients refer to pre-banding orthodontic separation as a painful orthodontic procedure. Low-level laser therapy (LLLT has been reported to have local analgesic effect. OBJECTIVE: The aim of this single-blind study was to investigate the perception of pain caused by orthodontic elastomeric separators with and without a single LLLT application (6J. METHODS: The sample comprised 79 individuals aged between 13 and 34 years old at orthodontic treatment onset. Elastomeric separators were placed in first maxillary molars at mesial and distal surfaces and kept in place for three days. The volunteers scored pain intensity on a visual analogue scale (VAS after 6 and 12 hours, and after the first, second and third days. One third of patients received laser applications, whereas another third received placebo applications and the remaining ones were controls. Applications were performed in a split-mouth design. Thus, three groups (laser, placebo and control were assessed. RESULTS: No differences were found among groups considering pain perception in all periods observed. CONCLUSION: The use of a single-dose of LLLT did not cause significant reduction in orthodontic pain perception. Overall pain perception due to orthodontic separator placement varied widely and was usually mild.

The Effect of Herbal Mouthwashes on the Force Decay of Elastomeric Chains: An In-vitro Study

Directory of Open Access Journals (Sweden)

Mohammed Nahidh

2017-10-01

Full Text Available Background: This in vitro study aimed to evaluate the effect of four herbal mouthwashes on the force decay of two types of clear short elastomeric chains (Regular and Extreme at various time intervals. Materials and methods: Four hundred forty pieces of both types of elastomeric chains with 19 mm length were utilized in this study. The force was measured, using digital scale immediately, after one-day immersion in distilled water and after 1, 2, 3 and 4 weeks immersion in the specific mouthwash for one minute twice daily then washed and kept in distilled water at 37°C. Force decay was calculated and compared among different elastic types, mouthwashes and time intervals using t-test and one-way ANOVA then Tukey’s tests. Results: The force degradation of regular type was significantly higher than extreme one. With time, the force decay increased significantly in both types. There was non-significant difference among the mouthwashes in the first and second weeks while the opposite in the third and fourth especially with the control group. Conclusions: The extreme type is preferred over the regular one because of its low force decay and the tested mouthwashes have no clinical significant effect on the force degradation over time in comparison with distilled water.

Accuracy of dual photon absorptiometry for assessment of bone mineral and body composition

International Nuclear Information System (INIS)

Aoki, Manabu; Iwamura, Akira; Goto, Eisuke; Mori, Yutaka; Kawakami, Kenji; Soshi, Shigeru

1991-01-01

Accuracy of bone mineral measurement by the dual photon absorptiometry (DPA) was studied in comparison to ashed bone mineral (ash) on the lumbar spine of 23 cada vars. There was a high correlation (r=0.896) between the value of DPA and ash weight. Bone mineral content in the radius by the single photon absorptiometry (SPA) did not correlate to bone mineral density (BMD) by DPA in the patients with hemodialysis. SPA may be less useful to assess BMD of the whole body. Fat mass and lean mass measured by DPA were well correlated to the value obtained by the electrical impedance method. Precision in measurement of fat mass and lean mass was also confirmed by the electrical impedance method. These results suggest that DPA has a high precision for measurements of the bone mineral and the body composition. (author)

Minerals Planning Policies and Supply Practices in Ireland.

NARCIS (Netherlands)

Ike, P.; van der Molen, S.D.A.

Table of Contents: 1 Country background. 2 General description of the mineral industry. 3 National system legislation governing ownership resources. 4 National system governing securing supply of minerals. 5 Land use planning. 6 Evaluation of sustainability of mineral supply. 7 Identification of the

Precision of high-resolution dual energy x-ray absorptiometry of bone mineral status and body composition in small animal models

Directory of Open Access Journals (Sweden)

Lochmüller E. M.

2001-01-01

Full Text Available The purpose of this study was to analyze the in situ precision (reproducibility of bone mineral and body composition measurements in mice of different body weights and rats, using a high-resolution DXA (dual energy X-ray absorptiometry scanner. We examined 48 NMRI mice weighing approximately 10 to 60 g, and 10 rats weighing approximately 140 g. Four repeated measurements were obtained on different days. In mice, the standard deviations of repeated measurements ranged from 2.5 to 242 mg for bone mineral content (BMC, from 0.16 to 3.74 g for fat, and from 0.40 to 4.21 g for lean mass. The coefficient of variation in percent (CV% for BMC/BMD (bone mineral density was highest in the 10 g mice (12.8% / 4.9% and lowest in the 40 g mice (3.5% /1.7%. In rats, it was 2.5 /1.2% in the lower extremity, 7.1/3.0 % in the spine, 5.7/2.0 % in the femur, and 3.6%/2.1% in the tibia. The CV% for fat and lean mass in mice was higher than for BMC. The study demonstrates good precision of bone mineral and moderate precision of body composition measure-ments in small animals, using a high-resolution DXA system. The technique can be used for testing the efficacy of drugs in small animal models, for muta-genesis screens, and for the phenotypic characterization of transgenic mice.

Petrography, mineralization and mineral explorations in the Zendan salt dome (Hara, Bandar Lengeh

Directory of Open Access Journals (Sweden)

Habib Biabangard

2018-04-01

mineralization were sent to the Zarzma laboratory and were analyzed with Inductively Coupled Plasma (ICP-OES. Two samples of igneous rocks were analyzed for determining major, minor and trace elements with ICP in Zarzma laboratory. Discussion Magmatic and evaporate fluids are sources of hydrothermal iron mineralization (Barton and Johnson, 2004. Sodic-calcic, semi sub deep pottasic, low silicific and sericitic alterations are related to magmatic fluids (Barton and Johnson, 2004. In the Zendan salt dome it seems that plutonic rocks prepared the source of temperature and made brine liquids evaporate and then moved the metals. Sodic alteration is one of the frequency alterations in the hydrothermal iron deposits related to high brain liquids (Arencibia and Clark, 1996. Immobile elements such as Ni, P and V show a high amount of magmatic iron deposit (Nystrom and Henriquiz, 1994. There is a significant relationship between the amount of Fe and the frequency elements. With an increase in the Fe content, the amount of TiO2, K2O, SiO2 and Al2O3 oxides decrease and the amounts of Ni and Cr2O3 increase. Low immobile elements’ contents and alteration type in the Zendan salt dome show the iron mineralization effect of brines fluids. On the other hand, this deposit can be classified into VMS deposits. Results Iron mineralization in Zendan salt dome is often magnetite, hematite, pyrite and chalcopyrite. Iron mineralization in the Zendan salt dome consists mostly of hematite, limonite and oligist (red soil layers. They are usually found as scattered discontinuous layers and are alternated with gypsum layers. Hematite is the most abundant and dominant. There is a significant relationship between the amount of Fe and frequency elements. With increasing the Fe content, the amounts of TiO2, K2O, SiO2 and Al2O3 oxides decrease and the amounts of Ni and Cr2O3 increase . Low immobile elements' contents and alteration type in the Zendan salt dome shows the iron mineralization effect on brines

Proximate composition, functional properties, amino acid, mineral and vitamin contents of a novel food: Alhydwan (Boerhavia elegana Choisy) seed flour.

Science.gov (United States)

Al-Farga, Ammar; Zhang, Hui; Siddeeg, Azhari; Shamoon, Muhammad; V M Chamba, Moses; Al-Hajj, Nabil

2016-11-15

Alhydwan (Boerhavia elegana Choisy) seed flour was evaluated for chemical and nutritional composition, and functional properties in a pursuit to identify an innovative plant with high nutraceuticals value which could be exploited in other food applications. The flour was found to be rich in dietary fiber (30.13%), protein (14.60%), crude fat (11.49%), carbohydrates (30.77%), and ash (6.88%) and encompassed adequate amounts of essential amino acids and minerals, whereas, sucrose constituted 71.3% of total sugar contents. Vitamins analysis revealed that flour is rich in water-soluble vitamins such as Thiamin (B1), Riboflavin (B2) and Niacin (B3), to the amounts of 19.3, 8.2 and 2.3mg/100g, respectively. Results on functional properties demonstrated high water and oil absorption capacities of 6.31 and 2.43g/g, respectively. Foaming capacity, foam stability and emulsion capacity were 9.35%, 6.90%, and 29.60%, respectively. It can be concluded that alhydwan is an excellent food material with a high nutritional value. Copyright © 2016 Elsevier Ltd. All rights reserved.

Mineral-modeled ceramics for long-term storage of high-level nuclear wastes

International Nuclear Information System (INIS)

Vance, E.R.

1980-01-01

Over the past ten years, Penn State's Materials Research Laboratory has done extensive work on mineral-modeled ceramics for high-level nuclear waste storage. These ceramics are composed of several mineral analogues that form a monolithic polycrystalline aggregate. Mineral-modeling can be made in a similar fashion to nuclear waste glasses, and their naturally occurring analogues are known to last millions, and even billions, of years in hot, wet conditions. It is believed that such ceramics could reduce dispersal of radionuclides by leaching to a minimum

Proximate composition and nutrient content of some wild and ...

African Journals Online (AJOL)

Proximate composition and nutrient content of some wild and cultivated ... Ca, P, K), one minor mineral (Fe) constituent and vitamin C content were determined. ... Mineral content (P and K) in the mushroom sporophores were found to be ...

Pulp yield and mineral content of commercial hybrids of yellow passion fruits Conteúdo mineral e rendimento de polpa de híbridos comerciais de maracujá-amarelo

Directory of Open Access Journals (Sweden)

Daiva Domenech Tupinambá

2012-03-01

Full Text Available Physical analyses and an analysis of the mineral content were carried out by peroxide-perchloric wet-digestion, taking readings using inductively coupled plasma-atomic emission spectrometry (ICP-AES and measurements using an analytical balance and digital paquimeter, of three commercial hybrids of Passiflora edulis f. flavicarpa Deg.: BRS Sol do Cerrado, BRS Ouro Vermelho and BRS Gigante Amarelo, cultivated and harvested from the experimental area of Embrapa Cerrados, Planaltina, DF, Brazil, in October/2007. Eighteen fruits were evaluated for each hybrid, and presented weights and dimensions superior to those found in the scientific literature, without significant differences between the hybrids. Sol do Cerrado showed less weight loss post storage when compared to the other hybrids, but no significant differences were found with respect to the other physical parameters studied. The mineral contents found in the hybrids were higher than the values found in the scientific literature and in the Brazilian food composition tables (TACO elaborated by NEPA-UNICAMP. The Sol do Cerrado had a higher iron content than the other hybrids. The hybrids are excellent sources of minerals, especially in comparison with the frozen pulp sold in supermarkets.Análises físicas e de conteúdo mineral foram executadas por meio de digestão peróxido/perclórica com leitura em ICP-AES, e medições, com auxílio de balança analítica digital e paquímetro digital, de três híbridos comerciais de Passiflora edulis f. flavicarpa Deg. - BRS Sol do Cerrado, BRS Ouro Vermelho e BRS Gigante Amarelo -, cultivados na área experimental da Embrapa Cerrados, Planaltina-DF, no período de outubro de 2007. Dezoito frutos de cada híbrido foram avaliados e apresentaram pesos e dimensões superiores àqueles encontrados na literatura científica, sem diferenças significativas entre os híbridos. Sol do Cerrado apresentou menor perda de peso após o armazenamento em relação aos

Growth hormone (GH) treatment increases serum insulin-like growth factor binding protein-3, bone isoenzyme alkaline phosphatase and forearm bone mineral content in young adults with GH deficiency of childhood onset

DEFF Research Database (Denmark)

Juul, A; Pedersen, S A; Sørensen, S

1994-01-01

Recent studies have demonstrated that growth hormone (GH)-deficient adults have a markedly decreased bone mineral content compared to healthy adults. However, there are conflicting results regarding the effects of GH treatment on bone mineral content in GH-deficient adults. Therefore, we evaluated...... the effect of GH treatment on a marker of bone formation (bone alkaline phosphatase), hepatic excretory function and distal forearm bone mineral content in GH-deficient adults. Growth hormone was administered subcutaneously in 21 adults (13 males and 8 females) with GH deficiency of childhood onset for 4...... months in a double-blind, placebo-controlled GH trial, while 13 of the patients then received further GH for an additional 14 months. Serum insulin-like growth factor I (IGF-I) increased significantly from 100 to 279 micrograms/l and IGF binding protein-3 (IGFBP-3) from 1930 to 3355 micrograms/l after 4...

MINERAL WATER FROM SUPERMARKET VS. TAP WATER. SOME CONSIDERATIONS RELATED TO INNOCUITY

Directory of Open Access Journals (Sweden)

Ciprian – Nicolae POPA

2015-04-01

Full Text Available 15 Romanian brands of mineral water were purchased from hypermarket. For each of the 15 mineral waters were determined the content of nitrates, nitrites and pH. The data obtained were compared with the content of nitrates, nitrites and pH of the tap water collected in 15 locations in Bucharest, according to data released by the Apa Nova operator. The results showed that the mean of tap water pH in Bucharest, although slightly higher than the tested mineral waters pH, did not differ significantly from the mean of mineral waters pH, being situated in the alkaline domain. The mean content of nitrates in tap water in Bucharest, did not differ significantly from that of the tested mineral waters (t = 0.811. Nitrates content of tap water in Bucharest was significantly distinct less, as the pH was higher (r = 0.68**. Basically, the change in pH by one unit, lowers the amount of nitrate by 46%. Bucharest tap water nitrites content was significantly lower than that of tested mineral waters (0.005 mg/l to 0.0124; t = 2.674*. Basically, Bucharest tap water contained up to 2.5 times less nitrites than the nitrites mean of tested mineral waters.

Manganese Supplementation in Deer under Balanced Diet Increases Impact Energy and Contents in Minerals of Antler Bone Tissue

OpenAIRE

Cappelli, Jamil; Garcia, Andr?s; Ceacero, Francisco; Gomez, Santiago; Luna, Salvador; Gallego, Laureano; Gambin, Pablo; Landete-Castillejos, Tom?s

2015-01-01

Bone ash, collagen, Ca and P composition, are considered the main factors affecting mechanical properties in bones. However, a series of studies in bone and antler have shown that some trace minerals, such as manganese, may play a role whose importance exceeds what may be expected considering their low content. A previous study showed that a reduction in manganese in antlers during a year of late winter frosts led to generalized antler breakage in Spain, which included a reduction of 30% of c...

Characterization and origin of low-T willemite (Zn2SiO4) mineralization: the case of the Bou Arhous deposit (High Atlas, Morocco)

Science.gov (United States)

Choulet, Flavien; Barbanson, Luc; Buatier, Martine; Richard, James; Vennemann, Torsten; Ennaciri, Aomar; Zouhair, Mohamed

2017-10-01

Willemite (Zn2SiO4) usually reported in hypogene non-sulfide deposits is described as the main ore mineral in the carbonate-hosted Bou Arhous zinc deposit. This deposit is located in the High Atlas intracontinental range that formed during the Tertiary. Based on a set of microscopic observations, it was possible to establish that willemite replaces primary sphalerite. On the basis of cathodoluminescence imaging, three successive generations of willemite are distinguished, with evidence of dissolution-reprecipitation processes. Willemite is also variably enriched in Ge (up to 1000 ppm), while Ge contents lower than 100 ppm are reported in the primary sulfide minerals. Depending on the willemite generation, this substitution was positively or negatively correlated to the Zn-Pb substitution. According to the nature of zoning (sector versus oscillatory), the incorporation of Ge was either controlled by crystallographic factors or by the nature of the mineralizing fluids. Willemite is associated with other oxidation-related mineral species, like cerussite (PbCO3) but is not in isotopic equilibrium and therefore not considered to be cogenetic. Oxygen isotope compositions support the formation of willemite at temperatures below 130 °C, from mixed meteoric and deeper, hydrothermal fluids. The formation of the High Atlas Belt during the Tertiary has contributed to the exhumation of the sulfide minerals and the development of vertical conduits for percolation of meteoric water and ascending hydrothermal fluids. In addition to a local contribution of silicate minerals of the host limestone, hydrothermal fluids probably transported Si and Ge that are incorporated in willemite.

Determination of Mineral Contents of Some Legume and Cereal Forages Grown as Naturally in Pastures of Erzurum Province

Directory of Open Access Journals (Sweden)

Esra GÜRSOY

2017-06-01

, present study carried out to determine the macro and micro mineral contents of legume and cereal forages grown as naturally showed that differences in terms of macro and micro minerals among both legume forages and cereal forages were significant.

The Impact of Organo-Mineral Complexation on Mineral Weathering in the Soil Zone under Unsaturated Conditions

Science.gov (United States)

Michael, H. A.; Tan, F.; Yoo, K.; Imhoff, P. T.

2017-12-01

While organo-mineral complexes can protect organic matter (OM) from biodegradation, their impact on soil mineral weathering is not clear. Previous bench-scale experiments that focused on specific OM and minerals showed that the adsorption of OM to mineral surfaces accelerates the dissolution of some minerals. However, the impact of natural organo-mineral complexes on mineral dissolution under unsaturated conditions is not well known. In this study, soil samples prepared from an undisturbed forest site were used to determine mineral weathering rates under differing conditions of OM sorption to minerals. Two types of soil samples were generated: 1) soil with OM (C horizon soil from 84-100cm depth), and 2) soil without OM (the same soil as in 1) but with OM removed by heating to 350°for 24 h). Soil samples were column-packed and subjected to intermittent infiltration and drainage to mimic natural rainfall events. Each soil sample type was run in duplicate. The unsaturated condition was created by applying gas pressure to the column, and the unsaturated chemical weathering rates during each cycle were calculated from the effluent concentrations. During a single cycle, when applying the same gas pressure, soils with OM retained more moisture than OM-removed media, indicating increased water retention capacity under the impact of OM. This is consistent with the water retention data measured by evaporation experiments (HYPROP) and the dew point method (WP4C Potential Meter). Correspondingly, silicon (Si) denudation rates indicated that dissolution of silicate minerals was 2-4 times higher in OM soils, suggesting that organo-mineral complexes accelerate mineral dissolution under unsaturated conditions. When combining data from all cycles, the results showed that Si denudation rates were positively related to soil water content: denundation rate increased with increasing water content. Therefore, natural mineral chemical weathering under unsaturated conditions, while

Characterization of coal types by their content of volatile matter

Energy Technology Data Exchange (ETDEWEB)

Scholz, A. (Ruhrkohle A.G., Essen (Germany, F.R.). Qualitaetsstelle)

1979-08-01

First of all, the difference between mineral content and ash content, the effect of minerals on the content of volatile matter and the connection between the ash and volatile matter contents is examined. Then three processes are described, to determine the content of organic fuels in the volatile matter of hard coal. The results are compared and the applicability of the processes is assessed. The conversion formulae recommended for the ASTM and NCB classifications are examined regarding their applicability to German types of coal. Finally an equation is proposed, in order to calculate the estimated value for the content of water and mineral free fuel in volatile matter. Apart from the content of volatile matter in water free coal, one only needs the figures ash content and the mineral factor for this. The equation can also be used for mixtures the usability of the equation is tested for Ruhr coal.

[Organic carbon and carbon mineralization characteristics in nature forestry soil].

Science.gov (United States)

Yang, Tian; Dai, Wei; An, Xiao-Juan; Pang, Huan; Zou, Jian-Mei; Zhang, Rui

2014-03-01

Through field investigation and indoor analysis, the organic carbon content and organic carbon mineralization characteristics of six kinds of natural forest soil were studied, including the pine forests, evergreen broad-leaved forest, deciduous broad-leaved forest, mixed needle leaf and Korean pine and Chinese pine forest. The results showed that the organic carbon content in the forest soil showed trends of gradual decrease with the increase of soil depth; Double exponential equation fitted well with the organic carbon mineralization process in natural forest soil, accurately reflecting the mineralization reaction characteristics of the natural forest soil. Natural forest soil in each layer had the same mineralization reaction trend, but different intensity. Among them, the reaction intensity in the 0-10 cm soil of the Korean pine forest was the highest, and the intensities of mineralization reaction in its lower layers were also significantly higher than those in the same layers of other natural forest soil; comparison of soil mineralization characteristics of the deciduous broad-leaved forest and coniferous and broad-leaved mixed forest found that the differences of litter species had a relatively strong impact on the active organic carbon content in soil, leading to different characteristics of mineralization reaction.

Cultivar and Harvest Month Influence the Nutrient Content of Opuntia spp. Cactus Pear Cladode Mucilage Extracts.

Science.gov (United States)

du Toit, Alba; de Wit, Maryna; Hugo, Arno

2018-04-16

Mucilage extracted from cactus pear cladodes is a hydrocolloid gum. It is a novel, natural, low-kilojoule, cost-effective texture-modifying ingredient in functional food products. Yet, the cultivar with the most optimal nutrient content and the preferred harvest times are as yet unknown. For this reason, mucilage from three Opuntia ficus-indica (Algerian, Morado and Gymno-Carpo) and one Opuntia robusta (Robusta) cultivar were investigated to determine their nutrient content over six months. Nutrients that contribute energy (10.2 kJ/g) were low. The mineral content was high (ash 17.7/100 g), particularly calcium (3.0 g/100 g) and phosphorous (109.5 mg/kg). Low insoluble acid-detergent fibre (1.4 g/kg) and neutral-detergent fibre (2.1 g/kg) values indicated that mucilage was mostly soluble fibre. Calcium oxalate crystals were not detected in dried mucilage. Opuntia robusta powders had higher protein, extractable fat and potassium content, while Opuntia ficus-indica mucilage powders had higher polyunsaturated (Linoleic and α-Linolenic acid) fat content. O. robusta Robusta mucilage, harvested after the fruit harvest (February) had the lowest energy content and the highest mineral and protein content. Mucilage powders were highly soluble, low-kilojoule and mineral-rich. This is a functional ingredient that is produced from an easily cultivated crop, as cactus pears grow in areas with poor soil, extremely high daytime temperatures and limited water supplies.

Mineral formation and organo-mineral controls on the bioavailability of carbon at the terrestrial-aquatic interface

Science.gov (United States)

Rod, K. A.; Smith, A. P.; Renslow, R.

2016-12-01

Recent evidence highlights the importance of organo-mineral interactions in regulating the source or sink capacity of soil. High surface area soils, such as allophane-rich or clay-rich soils, retain organic matter (OM) via sorption to mineral surfaces which can also contribute physical isolation in interlayer spaces. Despite the direct correlation between mineral surfaces and OM accumulation, the pedogenic processes controlling the abundance of reactive surface areas and their distribution in the mineral matrix remains unclear. As global soil temperatures rise, the dissolution of primary minerals and formation of new secondary minerals may be thermodynamically favored as part of soil weathering process. Newly formed minerals can supply surfaces for organo-metallic bonding and may, therefore, stabilize OM by surface bonding and physical exclusion. This is especially relevant in environments that intersect terrestrial and aquatic systems, such as the capillary fringe zone in riparian ecosystems. To test the mechanisms of mineral surface area protection of OM, we facilitated secondary precipitation of alumino-silicates in the presence of OM held at two different temperatures in natural Nisqually River sediments (Mt Rainier, WA). This was a three month reaction intended to simulate early pedogenesis. To tease out the influence of mineral surface area increase during pedogenesis, we incubated the sediments at two different soil moisture contents to induce biodegradation. We measured OM desorption, biodegradation, and the molecular composition of mineral-associated OM both prior to and following the temperature manipulation. To simulate the saturation of capillary fringe sediment and associated transport and reaction of OM, column experiments were conducted using the reacted sediments. More co-precipitation was observed in the 20°C solution compared to the 4°C reacted solution suggesting that warming trends alter mineral development and may remove more OM from solution

Mineral nutrition and alimentary pools in muskoxen and caribou on the Angujaartorfiup Nunaa range in West Greenland

Directory of Open Access Journals (Sweden)

Hans Staaland

1999-04-01

Full Text Available Minerals (Na, K, Cl, Ca, P, Mg and crude protein concentrations as well as total contents were measured throughout the alimentary tract of muskoxen and caribou from Angujaatorfiup Nunaa range, Søndre Strømfjord area in West Greenland. The muskoxen had significantly higher K concentrations in the caecum and proximal colon than the caribou. Caribou collected during the summer season had the highest Mg concentrations throughout the alimentary tract. In both species water, Na, K and CI concentrations decreased through the distal part of the alimentary system whereas Ca, Mg, P and crude protein concentrations increased. The muskoxen had relatively larger mineral pools and total content in the omasum than the caribou, and the caribou relatively larger mineral pools (except K and CI and total content in the caecum. Higher concentrations of Mg in the alimentary tract of the caribou than the muskoxen during the summer could also indicate that the caribou feed more on herbs with high concentrations of Mg. The data does also indicate that both the caribou and the muskoxen are living in an area where high intakes of minerals from both vegetation and mineral licks are possible. Based on the present study the muskoxen is apparently a typical grazer whereas the caribou is more like a concentrate selector.

Fluorine follows water: Effect on electrical conductivity of silicate minerals by experimental constraints from phlogopite

Science.gov (United States)

Li, Yan; Jiang, Haotian; Yang, Xiaozhi

2017-11-01

Fluorine and hydroxyl groups are minor constituents of silicate minerals, and share a lot of similarities concerning their physical and chemical properties. Hydroxyl groups significantly enhance the electrical conductivity of many silicate minerals, and it is expected that fluorine would have a comparable effect. This, however, has never been documented quantitatively. Here we present experimental approaches on this issue, by investigating the electrical conductivity of phlogopite with a wide range of fluorine content (but with broadly similar contents for other major elements). Electrical conductivities of gem-quality single crystal phlogopites, with samples prepared along the same orientation (normal to the (0 0 1) plane), were determined at 1 GPa and 200-650 °C using an end-loaded piston cylinder apparatus and a Solartron-1260 Impedance/Gain Phase Analyzer over the frequency range of 106 to 0.1 Hz. The complex spectra usually show an arc in the high frequency range and a short tail in the low frequency range, which are caused by lattice conduction and electrode effects, respectively. The electrical conductivity increases with increasing fluorine content, and the main charge carriers are fluorine. The activation enthalpies are ∼180 to 200 kJ/mol, nearly independent of fluorine content. The conductivity is linearly proportional to the content of fluorine, with an exponent factor of ∼1. The results demonstrate that conduction by fluorine leads to very high electrical conductivity at high temperatures. The influence of fluorine on electrical conductivity may be compared to that of hydrogen in nominally anhydrous minerals. This, along with the close association of fluorine and hydroxyl groups in silicate minerals and their similar crystal-chemical behaviors, suggests a more general role of fluorine in enhancing the electrical conductivity of many silicate minerals. Fluorine-rich assemblages, e.g., phlogopite and amphibole, could be locally enriched in the upper

halogen Contents of igneous minerals as indicators of magmatic evolution of rocks associated with the Ray porphyry copper deposit, Arizona

Science.gov (United States)

Banks, Norman G.

1976-01-01

The contents of Cl, F, and H2O+ (calculated) in some hydrous igneous minerals in intrusive rocks of Laramide age (70-60 m.y.) near Ray, Ariz., appear to be related to the age and the chemistry of the whole-rock samples. Apatite and biotite in younger, more silicic rocks contain more F but less Cl and H2O+ than apatite and biotite in older, more mafic rock; the same relations hold for F and H2O+ in sphene. Correlations of the abundance of Cl, F, and H2O+ in hornblende with rock chemistry and age are not as strong as for apatite, biotite, and sphene; igneous (?) epidote does not contain Cl and F in amounts detectable by electron microprobe analysis. The contents of Cl, F, and H2O+ in whole-rock samples decrease with increasing differentiation index and decreasing age. Data for a single pluton of variable composition mirror the results for a suite of different plutons and dikes. The data are satisfactorily although not exclusively explained by postulating that the melts each contained progressively less Cl, F, and H2O and that the hydrons minerals consumed most of the Cl, F, and H2O in the magmas. The data may also be explained by postulating that (1) the stocks evolved Cl-bearing water during their ascent and crystallization, or that (2) Cl and H2O were concentrated during differentiation of the stocks but the minerals failed to record their buildup. Both alternative explanations find problems with and require special conditions to satisfy field, chemical, and experimental data. If many of the special conditions are not met, a nearby batholithic parent to the stocks is not a favorable source of the mineralized fluids at Ray. Propylitic alteration of biotite results in Cl-poor chlorites and may have provided some Cl to hydrothermal fluids; biotite may have also supplied some F to propylitizing fluids through alteration.

Content of Selected Minerals and Active Ingredients in Teas Containing Yerba Mate and Rooibos.

Science.gov (United States)

Rusinek-Prystupa, Elżbieta; Marzec, Zbigniew; Sembratowicz, Iwona; Samolińska, Wioletta; Kiczorowska, Bożena; Kwiecień, Małgorzata

2016-07-01

The study aimed to determine the content of selected elements: sodium, potassium, copper, zinc, iron, manganese and active ingredients such as phenolic acids and tannins in teas containing Yerba Mate and Rooibos cultivated in various areas. The study material comprised six samples of Yerba Mate teas and of Rooibos teas, both tea bags and leaves, purchased in Puławy and online via Allegro. In total, 24 samples were tested. Yerba Mate was particularly abundant in Mn and Fe. The richest source of these elements was Yerba Mate Yer-Vita (2261.3 mg · kg(-1) d.m.) and (691.6 mg · kg(-1) d.m.). The highest content of zinc was determined in Yerba Mate Amanda with lime (106.0 mg · kg(-1) d.m.), while copper was most abundant in Yerba Mate Big-Active cocoa and vanilla (14.05 mg · kg(-1) d.m.). In Rooibos, the content of sodium was several times higher than in Yerba Mate. A clear difference was observed in the content of minerals in dry weight of the examined products, which could be a result of both the taxonomic distinctness and the origin of the raw material. Leaf teas turned out to be a better source of tannins; on the other hand, tea bags contained substantially more phenolic acids. The richest source of phenolic acids was Yer-Vita in bags (1.8 %), and the highest amount of tannins was recorded in the leaf tea Green Goucho caramel and dark chocolate (9.04 g · 100 g(-1) d.m.). In Rooibos products, the highest content of phenolic acids was recorded in tea bags (Savannah with honey and vanilla 0.96 %), and tannins in (Lord Nelson with strawberry and cream 7.99 g · 100 g (-1) d.m.).

Optical Manipulation of Shape-Morphing Elastomeric Liquid Crystal Microparticles Doped with Gold Nanocrystals

Energy Technology Data Exchange (ETDEWEB)

Sun, Y. R.; Evans, J. S.; Lee, T.; Senyuk, B.; Keller, P.; He, S. L.; Smalyukh, I. I.

2012-06-11

We demonstrate facile optical manipulation of shape of birefringent colloidal microparticles made from liquid crystal elastomers. Using soft lithography and polymerization, we fabricate elastomeric microcylinders with weakly undulating director oriented on average along their long axes. These particles are infiltrated with gold nanospheres acting as heat transducers that allow for an efficient localized transfer of heat from a focused infrared laser beam to a submicrometer region within a microparticle. Photothermal control of ordering in the liquid crystal elastomer using scanned beams allows for a robust control of colloidal particles, enabling both reversible and irreversible changes of shape. Possible applications include optomechanics, microfluidics, and reconfigurable colloidal composites with shape-dependent self-assembly.

New aspects of osteoporosis: Bone mineral content (BMC) measurement in osteoporosis associated with drugs, arthritis, and related conditions

International Nuclear Information System (INIS)

Gross, M.D.; Shapiro, B.

1987-01-01

Sensitive, non-invasive measurements of bone mineral content (BMC) provide the means to identify and characterize, prior to the development of symptoms, osteoporosis associated with drugs, rheumatoid arthritis, inflammatory bowel disease, diabetes mellitus, anorexia nervosa and immobilization. Moreover, BMC can be used to effectively screen populations at risk for the development of osteoporosis and longitudinal studies in individual patients can be used to guide effective anti-osteopenia therapy. This review will briefly detail recent BMC measurements in osteoporosis due to drugs, arthritis and related conditions. (orig.) [de

New aspects of osteoporosis: Bone mineral content (BMC) measurement in osteoporosis associated with drugs, arthritis, and related conditions

Energy Technology Data Exchange (ETDEWEB)

Gross, M.D.; Shapiro, B.

1987-02-01

Sensitive, non-invasive measurements of bone mineral content (BMC) provide the means to identify and characterize, prior to the development of symptoms, osteoporosis associated with drugs, rheumatoid arthritis, inflammatory bowel disease, diabetes mellitus, anorexia nervosa and immobilization. Moreover, BMC can be used to effectively screen populations at risk for the development of osteoporosis and longitudinal studies in individual patients can be used to guide effective anti-osteopenia therapy. This review will briefly detail recent BMC measurements in osteoporosis due to drugs, arthritis and related conditions.

Vertebral bone mineral measurement using dual photon absorptiometry and computed tomography

International Nuclear Information System (INIS)

Eriksson, S.; Isberg, B.; Lindgren, U.; Huddinge Univ. Hospital

1988-01-01

The lumbar spine of 14 cadavers was studied both by 153 Gd dual photon absorptiometry (DPA) and quantitative computed tomography (QCT) at 96 and 125 kVp. The intact spine and the individual vertebrae were analyzed. After these measurements the ash content of the vertebral body, the posterior elements, and the transverse processes was determined. The fat content of the vertebral body as well as its volume was also measured. With DPA, the bone mineral content (BMC) determined in situ as well as on excised spine specimens correlated highly with the amount of total vertebral ash (r > 0.92, SEE 0.81, SEE 3 ). The so-called corpus density and central density determinations were less accurate. No difference in accuracy was found between measurements when using 3 mm and 4.5 mm step intervals. Variations in the distribution of mineral between the vertebral body and the posterior elements contribute to the error in predicting vertebral body mineral with DPA. QCT gave a smaller error when a cylindric portion of the vertebral body with a 20 diameter was measured compared with one with a 9 mm diameter, when the dual energy technique was used (p 3 ). Single energy QCT was insignificantly less accurate than dual energy QCT. Only small differences were found between vertebrae with high fat density of the vertebral body when single or dual QCT was used. QCT was more accurate than DPA in the prediction of the mineral density of individual vertebral bodies (p < 0.05) but no difference was found when the average values for the lumbar spine were calculated. (orig.)

Active shape-morphing elastomeric colloids in short-pitch cholesteric liquid crystals.

Science.gov (United States)

Evans, Julian S; Sun, Yaoran; Senyuk, Bohdan; Keller, Patrick; Pergamenshchik, Victor M; Lee, Taewoo; Smalyukh, Ivan I

2013-05-03

Active elastomeric liquid crystal particles with initial cylindrical shapes are obtained by means of soft lithography and polymerization in a strong magnetic field. Gold nanocrystals infiltrated into these particles mediate energy transfer from laser light to heat, so that the inherent coupling between the temperature-dependent order and shape allows for dynamic morphing of these particles and well-controlled stable shapes. Continuous changes of particle shapes are followed by their spontaneous realignment and transformations of director structures in the surrounding cholesteric host, as well as locomotion in the case of a nonreciprocal shape morphing. These findings bridge the fields of liquid crystal solids and active colloids, may enable shape-controlled self-assembly of adaptive composites and light-driven micromachines, and can be understood by employing simple symmetry considerations along with electrostatic analogies.

Phosphorus minerals in tonstein; coal seam 405 at Sośnica-Makoszowy coal mine, Upper Silesia, southern Poland

Science.gov (United States)

Kokowska-Pawłowska, Magdalena; Nowak, Jacek

2013-06-01

Kokowska-Pawłowska, M. and Nowak, J. 2013. Phosphorus minerals in tonstein; coal seam 405 at Sośnica- Makoszowy coal mine, Upper Silesia, southern Poland. Acta Geologica Polonica, 63 (2), 271-281. Warszawa. The paper presents results of research on tonstein, which constitutes an interburden in coal seam 405 at the Sośnica- Makoszowy coal mine, Makoszowy field (mining level 600 m), Upper Silesia, southern Poland. The mineral and chemical compositions of the tonstein differ from the typical compositions described earlier for tonsteins from Upper Silesia Coal Basin area. Additionally, minerals present in the tonsteins include kaolinite, quartz, kaolinitised biotite and feldspars. The presence of the phosphatic minerals apatite and goyazite has been recognized. The presence of gorceixite and crandallite is also possible. The contents of CaO (5.66 wt%) and P2O5 (6.2 wt%) are remarkably high. Analysis of selected trace elements demonstrated high contents of Sr (4937 ppm) and Ba (4300 ppm), related to the phosphatic minerals. On the basis of mineral composition the tonstein has been identified as a crystalline tonstein, transitional to a multiplied one.

Effect of potato on acid-base and mineral homeostasis in rats fed a high-sodium chloride diet.

Science.gov (United States)

Narcy, Agnès; Robert, Laetitia; Mazur, Andrzej; Demigné, Christian; Rémésy, Christian

2006-05-01

Excessive dietary NaCl in association with a paucity of plant foods, major sources of K alkaline salts, is a common feature in Western eating habits which may lead to acid-base disorders and to Ca and Mg wasting. In this context, to evaluate the effects of potato, rich in potassium citrate, on acid-base homeostasis and mineral retention, Wistar rats were fed wheat starch (WS) or cooked potato (CP) diets with a low (0.5 %) or a high (2 %) NaCl content during 3 weeks. The replacement of WS by CP in the diets resulted in a significant urinary alkalinisation (pH from 5.5 to 7.3) parallel to a rise in citrate and K excretion. Urinary Ca and Mg elimination represented respectively 17 and 62 % of the daily absorbed mineral in rats fed the high-salt WS diet compared with 5 and 28 % in rats fed the high-salt CP diet. The total SCFA concentration in the caecum was 3-fold higher in rats fed the CP diets compared with rats fed the WS diets, and it led to a significant rise in Ca and Mg intestinal absorption (Ca from 39 to 56 %; Mg from 37 to 60 %). The present model of low-grade metabolic acidosis indicates that CP may be effective in alkalinising urine, enhancing citrate excretion and ameliorating Ca and Mg balance.

Bio-Inspired Wide-Angle Broad-Spectrum Cylindrical Lens Based on Reflections from Micro-Mirror Array on a Cylindrical Elastomeric Membrane

Directory of Open Access Journals (Sweden)

Chi-Chieh Huang

2014-06-01

Full Text Available We present a wide-angle, broad-spectrum cylindrical lens based on reflections from an array of three-dimensional, high-aspect-ratio micro-mirrors fabricated on a cylindrical elastomeric substrate, functionally inspired by natural reflecting superposition compound eyes. Our device can perform one-dimensional focusing and beam-shaping comparable to conventional refraction-based cylindrical lenses, while avoiding chromatic aberration. The focal length of our cylindrical lens is 1.035 mm, suitable for micro-optical systems. Moreover, it demonstrates a wide field of view of 152° without distortion, as well as modest spherical aberrations. Our work could be applied to diverse applications including laser diode collimation, barcode scanning, holography, digital projection display, microlens arrays, and optical microscopy.

Bone mineral content (bmc and bone mineral density (bmd in postmenopausal women formerly practising kayaking and fencing

Directory of Open Access Journals (Sweden)

B Raczyńska

2003-06-01

Full Text Available The investigation was aimed at answering the following questions: 1 Can a prolonged career in sports associated with considerable training loads, in conjunction with other osteoporosis risk factors (both past and present, affect the bone mineral content (BMC and bone mineral density (BMD of the former female athletes in their postmenopausal period of life?, and 2 How does the present lifestyle of the tested women, including physical activity and diet (calcium intake, influence the preservation of the optimal bone mass in these subjects? The postmenopausal subjects recruited to the present study included 15 former athletes (ten kayakers and five fencers and 11 women who never actively engaged in sports (control group. BMC (g and BMD (g/cm2 were densitometrically determined in the lumbar segment (L2-L4 of the spine, and the bone stiffness coefficient was ultrasonically determined in calcaneus. The effects of the osteoporosis risk factors (both past and present were estimated from individual replies to the questionnaire inquiries about the past career in sports, present physical activity, gonadal dysfunctions (dysmenorrhoea during the career and the present need for hormonal supplementary treatment, and the current dietary patterns. The results indicate that mean BMC and BMD values detected in the former athletes did not differ significant from those obtained in the non-athlete, control women: the BMC values equalled to 54.5±10.5, 52.6±14.6, and 46.5±3.2 g in the kayakers, the fencers, and the control women, respectively, while the respective BMD values were 1.05±0.45, 0.96±0.66, and 1.08±0.58 g/cm2. The questionnaire-based studies showed that neither the former female athletes nor the non-athlete controls exhibited in the past longer (i.e., lasting more than three months periods of hormonal disorders (amenorrhoea. As assessed from the dietary intake, only in the former fencers the diet covered the demand for calcium in 100%. In conclusion

Plant litter chemistry alters the content and composition of organic carbon associated with soil mineral and aggregate fractions in invaded ecosystems.

Science.gov (United States)

Tamura, Mioko; Suseela, Vidya; Simpson, Myrna; Powell, Brian; Tharayil, Nishanth

2017-10-01

Through the input of disproportionate quantities of chemically distinct litter, invasive plants may potentially influence the fate of organic matter associated with soil mineral and aggregate fractions in some of the ecosystems they invade. Although context dependent, these native ecosystems subjected to prolonged invasion by exotic plants may be instrumental in distinguishing the role of plant-microbe-mineral interactions from the broader edaphic and climatic influences on the formation of soil organic matter (SOM). We hypothesized that the soils subjected to prolonged invasion by an exotic plant that input recalcitrant litter (Japanese knotweed, Polygonum cuspidatum) would have a greater proportion of plant-derived carbon (C) in the aggregate fractions, as compared with that in adjacent soil inhabited by native vegetation that input labile litter, whereas the soils under an invader that input labile litter (kudzu, Pueraria lobata) would have a greater proportion of microbial-derived C in the silt-clay fraction, as compared with that in adjacent soils that receive recalcitrant litter. At the knotweed site, the higher C content in soils under P. cuspidatum, compared with noninvaded soils inhabited by grasses and forbs, was limited to the macroaggregate fraction, which was abundant in plant biomarkers. The noninvaded soils at this site had a higher abundance of lignins in mineral and microaggregate fractions and suberin in the macroaggregate fraction, partly because of the greater root density of the native species, which might have had an overriding influence on the chemistry of the above-ground litter input. At the kudzu site, soils under P. lobata had lower C content across all size fractions at a 0-5 cm soil depth despite receiving similar amounts of Pinus litter. Contrary to our prediction, the noninvaded soils receiving recalcitrant Pinus litter had a similar abundance of plant biomarkers across both mineral and aggregate fractions, potentially because of

Chemical and mineralogical data of the metalliferous mineralization from S. Carlo mine (Peloritani mts, Ne Sicily, Italy

Directory of Open Access Journals (Sweden)

Pisacane, G

2006-05-01

presence of this noble metal in all minerals is important and shows that the mineralizing event is late and widespread. The Ag content is generally about 2000 ppm in all metalliferous minerals, and is higher than those found in the same minerals of other Peloritani deposits in which this content is around 1000 ppm. Sphalerite and carbonates show very low Ag content. Chalcopyrite, sphalerite, bournonite and tetrahedrite show high contents of Ni, As, Bi. Cd and Mn are concentrated in sphalerite. Fe content in sphalerite is on average > 6%, in agreement with pressure-temperature conditions (pressure from 2 to 3 kbar and temperature from 420 to 550 C.

Minerals Planning Policies and Supply Practices in The Netherlands

NARCIS (Netherlands)

Ike, P.

Table of Contents: 1 Country background. 2 General description of the mineral industry. 3 National system legislation governing ownership resources. 4 National system governing securing supply of minerals. 5 Land use planning. 6 Evaluation of sustainability of mineral supply. 7 Identification of the

Minerals Planning Policies and Supply Practices in Great Britain

NARCIS (Netherlands)

Ike, P.; van der Molen, S.D.A.

Table of Contents: 1 Country background. 2 General description of the mineral industry. 3 National system legislation governing ownership resources. 4 National system governing securing supply of minerals. 5 Land use planning. 6 Evaluation of sustainability of mineral supply. 7 Identification of the

Primary uranium mineralization in paleochannels of the Um Bogma formation at Allouga Southwestern Sinai

International Nuclear Information System (INIS)

Bisher, A. H.

2012-12-01

The Um Bogama formation in the Allouga area is within a major Graben trending NNW-SSE. The formation is composed mainly of sandy dolostone. Lactomicin marl, siltstone and carbonaceous shale with a high content of organic matter. The black carbonaceous shale represents the redox-front (reduced facies) at which hexavalent uranium can reduce to the presence state, resulting in the redeposition of uranium mineral. The presence of uranium minerals are increased with an increasing amount of carbonaceous matter in the paleochannels of the Allouga area. Small-scale fault planes also show an increase in the uranium content. The present study reveals the presence of the primary uranium contents, uranium, pitch blends and coffinite, which are recorded for the first time in the area. (Author)

Pulp antioxidant activities, mineral contents and juice nutritional ...

African Journals Online (AJOL)

Statistical differences among the citrus pulps were established for the contents of phenols, flavonoids and carotenoids, the quantification of bioactive compounds revealed distinct contents amongst the analysed materials. Phenolic and flavonoid contents presented a value between 3108.78 and 4046.20 mg gallic acid/100 g ...

An investigation into UV light exposure as an experimental model for artificial aging on tensile strength and force delivery of elastomeric chain.

Science.gov (United States)

Wahab, Siti Waznah; Bister, Dirk; Sherriff, Martyn

2014-02-01

This study investigated the effect of ultraviolet type A light (UVA) exposure on the tensile properties of elastomeric chain. UVA light exposure was used as model for artificial aging, simulating prolonged storage of elastomeric chain. Tensile strength (n = 60) was measured after exposing Ormco, Forestadent and 3M chains to UVA light for 0, 2, 3, and 4 weeks. Force decay was measured (n = 60) using chain exposed for 5, 10, and 14 days. The chains were subsequently stretched at a constant distance and the resulting forces measured at 0, 1, 24 hours and 7, 14, 21, and 28 days. This test simulated a clinical scenario of pre-stretching and subsequent shortening of elastomeric chain. Tensile strength had statistically significant difference and was directly related to the duration of ultraviolet (UV) light exposure. Forestadent chain, which had the second highest value for the 'as received' product, showed the most consistent values over time with the lowest degradation. Ormco showed the lowest values for 'as received' as well as after UV exposure; 3M chain had the highest loss of tensile strength. Force decay was also significantly different. UV light exposure of 10 days or more appears to mark a 'watershed' between products: 3M had most survivors, Forestadent chain had some survivors, depending on the time the chain was stretched for. None of the Ormco product survived UV light exposure for more than 5 days. UVA light exposure may be used as a model for artificial aging as it reduces force delivery and tensile strength of exposed chains.

Prediction of femoral neck and spine bone mineral content from the BMC of the radius or ulna and the relationship between bone strength and BMC

Science.gov (United States)

Wilson, C. R.

1974-01-01

The bone mineral content (BMC) is extensively used to provide information about the status of an entire skeleton. Changes in BMC are employed to evaluate the effect of various drugs, disease states, weightlessness, exercise, renal dialysis and others on the skeleton. Clinical and functional information is discussed that may be derived from the BMC of a limited region of the skeleton. In particular there is a fairly high degree of correlation between the BMC of the radius or ulna and that of the femoral neck, r about 0.85 and a somewhat lower relationship between the BMC of the radius or ulna and the thoracic vertebrae, r about 0.65. Also the BMC is highly related to the strength of bone at that scan site.

Content changes of selected mineral nutrients in mare’s colostrums in the first 72 hours after foaling

Directory of Open Access Journals (Sweden)

Branislav Gálik

2012-01-01

Full Text Available The aim of this study was to monitor levels of minerals in mare’s colostrum in the first 3 days after foaling. Colostrum samples from four warm-blood mares (in three repetitions were analysed 2, 12, 24, 36, 48 and 72 hours postpartum. The samples were obtained by hand milking. Calcium (Ca, phosphorus (P, magnesium (Mg, sodium (Na, potassium (K, zinc (Zn, copper (Cu, iron (Fe and manganese (Mn contents were analysed in each sample. Non-significant decrease of postpartum Ca and Na contents was found in the analysed samples. Significant differences (P < 0.05 in P content were detected between 2 and 36 hours postpartum. Content of Mg showed statistically significant differences (P < 0.05 during the period after foaling (2, 24, 36, 48 and 72 hours post foaling. Mg concentration reached its maximum (21.8 g.kg−1 of dry matter 2 hours postpartum and it dropped to its lowest level (5.27 g.kg−1 of dry matter 48 hours after foaling. Similarly, the highest K content (significant in relation to values obtained 36, 48 and 72 hours postpartum was detected 2 hours after foaling while the lowest K level (37.96 g.kg−1 of dry matter was found 48 hours postpartum. As regards the microelements, Cu showed insignificant differences in its postpartum levels (P > 0.05. Besides growth of Fe levels, decrease of Zn and Mn (P > 0.05 was also observed.

The study on changes of bone mineral content of mandible by quantitative computed tomography

International Nuclear Information System (INIS)

Tamai, Manabu; Ishii, Yasuo

1996-01-01

A method to measure bone mineral of mandible has not been established. The bone mineral content (BMC) of the mandible with single energy quantitative computed tomography (SEQCT), which was compared with that of the spine, was discussed. The subjects were 104 healthy persons (54 males and 50 females, age range: 21-69) and 33 patients of mandibular atrophy (10 males and 23 females, age range: 46-87). The BMC changes of the mandible differed according to sex. In males BMC of trabecular bone and cortical bone decreased slightly after 40 and 30 years of age respectively. In females, BMC decreased consistently during menopause. BMC of the spine tended to decrease with aging, especially in females. In males having mandibular atrophy, the BMC of trabecular bone of the mandible decreased, and that of cortical bone of the mandible increased with aging. In females having atrophy, the BMC of trabecular bone and cortical bone of the mandible decreased with aging. The BMC of the mandible was correlated with the length of the denture-wearing time in males. In females, it appears that the BMC of the mandible participates in estrogen deficiency like the BMC of the spine. From the above, measurement of the BMC of the mandible by SEQCT was considered to be very useful for grasping the severity and progressive rate, and other conditions of alveolar ridge atrophy and determining the remedial course. (author)

The study on changes of bone mineral content of mandible by quantitative computed tomography

Energy Technology Data Exchange (ETDEWEB)

Tamai, Manabu; Ishii, Yasuo [Fukui Medical School, Matsuoka (Japan)

1996-04-01

A method to measure bone mineral of mandible has not been established. The bone mineral content (BMC) of the mandible with single energy quantitative computed tomography (SEQCT), which was compared with that of the spine, was discussed. The subjects were 104 healthy persons (54 males and 50 females, age range: 21-69) and 33 patients of mandibular atrophy (10 males and 23 females, age range: 46-87). The BMC changes of the mandible differed according to sex. In males BMC of trabecular bone and cortical bone decreased slightly after 40 and 30 years of age respectively. In females, BMC decreased consistently during menopause. BMC of the spine tended to decrease with aging, especially in females. In males having mandibular atrophy, the BMC of trabecular bone of the mandible decreased, and that of cortical bone of the mandible increased with aging. In females having atrophy, the BMC of trabecular bone and cortical bone of the mandible decreased with aging. The BMC of the mandible was correlated with the length of the denture-wearing time in males. In females, it appears that the BMC of the mandible participates in estrogen deficiency like the BMC of the spine. From the above, measurement of the BMC of the mandible by SEQCT was considered to be very useful for grasping the severity and progressive rate, and other conditions of alveolar ridge atrophy and determining the remedial course. (author).

Correlation of radial bone mineral content with total body calcium in chronic renal failure

International Nuclear Information System (INIS)

Cohn, S.H.; Ellis, K.J.; Caselnova, R.C.; Asad, S.N.; Letteri, J.M.

1975-01-01

Loss of bone mineral of the skeleton in renal disease can be measured directly by total body neutron activation analysis (TBNAA), and also by an absorptiometric technique applied to the appendicular skeleton (radius). In the present study the results of these two techniques are compared in 25 patients with renal insufficiency, 53 patients with end-stage renal failure on dialysis, and 24 normal control subjects. It is apparent that there is good correlation between total body calcium (TBCa) and bone mineral content (BMC) in all groups studied. The correlation in the normal contrast group was 0.944 as compared to 0.919 for the renal patients and 0.892 for patients with end-stage renal failure on dialysis. In order to measure the relative deficit in TBCa in individual patients from the absolute Ca measurement, it is necessary to normalize the data for sex, age, and skeletal size. For this purpose, an empirically derived relationship was used to predict the normal skeletal Ca in each subject, based on weight, height, sex, and age. The measured TBCa divided by the predicted TBCa is referred to as the calcium ratio. This ratio is useful in expressing the relative deficit of Ca in individual renal patients. In similar manner, BMC data were normalized, with the same relationship used to obtain BMC ratios. The normalization procedures allow both the TBCa and BMC measurements to be used to quantitate the Ca deficit in individual patients with renal insufficiency

Effect of pelvic irradiation on the bone mineral content of lumbar spine in cervical cancer

International Nuclear Information System (INIS)

Youn, S. M.; Choi, T. J.; Koo, E. S.; Kim, O. B.; Lee, S. M.; Suh, S. J.

1997-01-01

To evaluate the loss of bone mineral contents(BMC) in lumbar spine within the radiation field for cervical cancer treatment, BMC in the irradiated patient group was compared with that of a normal control group. Measurements of BMC in the trabecular bone in lumbar spines(L3-L5) were performed in the both patient and normal control groups. Investigators used dual-energy quantitative computerized tomography(DEQCD) using photon energy of 120 and 80kVp. The numbers of patient and control groups were 43 in each with age distribution of fifth to seventh decade of women. The numbers of control group were 22 in fifth, 10 in sixth, and 11 in seventh decade, those of patient group were 14 in fifth, 14 in sixth, and 15 in seventh decade of women. The radiation field was extended to L5 spine for pelvic irradiation with 45-54Gy of external radiation dose and 30Gy of high dose rate brachytherapy in cervical cancer. The BMC is decreased as increasing age in both control and patient groups. BMC in lumbar spine of patient group was decreased by about 13% to 40% maximally. The BMC of L3 and L4 a region that is out of a radiation field for the patient group demonstrated 119.5 ±30.6, 117.0 ±31.7 for fifth, 83.3 ± 37.8, 88.3 ± 46.8 for sixth and 61.5 ± 18.3, 56.2 ± 26.6 mg/cc for seventh. Contrasted by the normal control group has shown 148.0 ± 19.9, 153.2 ± 23.2 for fifth, 96.1 ± 30.2, 105.6 ± 26.5 for sixth and 73.9 ± 27.9, 77.2 ± 27.2 mg/cc for seventh decade, respectively. The BMC of patient group was decreased as near the radiation field, while the lower lumbar spine has shown more large amounts of BMC in the normal control group. In particular, the BMC of L5 within the radiation field was significantly decreased to 33%, 31%, 40% compared with the control group of the fifth, sixth and seventh decades, respectively. The pelvic irradiation in cervical cancer has much effected on the loss of bone mineral content of lumbar spine within the radiation field, as the lower

Effects of storage time and straw content of cattle slurry on the mineralization of nitrogen and carbon in soil

DEFF Research Database (Denmark)

Sørensen, P.

1998-01-01

Animal slurries are stored for a variable period of time before application in the field. The effect of cattle slurry storage time and temperature on the subsequent mineralization of C and N in soil was studied under laboratory conditions. Urine and faeces from a dairy cow were sampled separately...... and mixed to a slurry. After 4 weeks of storage under anaerobic conditions at 15 degrees C, the NH4+ N content exceeded the original urinary N content of the slurry; the NH4+ content increased only slightly during the following 16 weeks of storage. After 4 weeks of storage, the proportion of slurry C...... in volatile fatty acids (VFA) amounted to 10% and increased to 15% after 20 weeks. Straw addition to the slurry caused an increase of VFA-C in stored slurry, but had a negligible influence on the proportion of slurry N in the form of NH4+. Slurries subjected to different storage conditions were added...

Characterization of element and mineral content in Artemisia annua ...

African Journals Online (AJOL)

Dr DIALLO

2013-06-26

Jun 26, 2013 ... The mineral elements are present in different kinds of herbal leaves in various proportions .... rare earth elements (Dy, Eu, Gd, Sm, Tb and Yb) were not detected in ..... behaviour of leached aluminum in tea infusions. The Sci.

Study on minerals status of dairy cows and their supplementation through area specific mineral mixture in the state of Jharkhand

Directory of Open Access Journals (Sweden)

B. M. Bhanderi

2016-12-01

Full Text Available Abstract Background Deficiency of macro and micro-minerals in the ration of dairy cows adversely affects growth, milk production and reproduction efficiency. It is essential to examine mineral concentrations in feeds offered to dairy cows in practical farms. Methods Two villages from each taluka were selected at random for taking representative samples of feeds, forages and hair. Within the village, help was sought from village milk producers and district animal husbandry officer for identification of 4 to 5 farmers and collection of representative samples. All the samples were processed and analyzed for chemical composition as well as major macro and micro-minerals, using Inductively Coupled Plasma-Optical Emission Spectrometer. Results Ca content in wheat straw (0.29%, crushed maize (0.02% and wheat bran (0.12% was found to be below the critical level (0.30%. The P content in concentrate ingredients was high (0.26–0.96%, but low in dry roughages (0.06–0.12%. Cereal straws (0.14% and grains (0.12% were deficient in Mg. Feeds and forages were found to be adequate in K (1.50%. Cereals straws were found to be deficient in S (0.11%. Greens were good source of Cu (12.02 ppm. Wheat straw was found to be low in Zn (18 ppm, but high in Mn (225 ppm and Fe (509 ppm. Local grasses and azolla green were found to be rich source of Co (>1.00 ppm. Se (0.63 ppm was present in appreciable quantities in most of the feedstuffs. Conclusions From the present study, it was apparent that the feeds and forages available in the state of Jharkhand may not meet the requirements for Ca, P, Mg, Cu, Zn and Co in order to sustain a milk production of ~10 kg/day. Therefore, it is necessary to supplement these deficient minerals through area specific mineral mixture in the ration of dairy cows for improving productivity and reproduction efficiency.

Dietary mineral status of lactating buffaloes in Kolhapur district of Maharashtra State in India

Directory of Open Access Journals (Sweden)

P.L. Sherasia

2010-02-01

Full Text Available Kolhapur district is located in the Western part of India and is well known for buffalo rearing. Buffaloes are mainly fed on crop residues and local grasses and need to be supplemented with deficient minerals for proper production and reproduction functions. In view of this, area specific mineral mixture was developed for the district by testing feeds and fodders for macro and micro minerals. The average calcium (Ca content in straws of groundnut, ragi and soybean was high (0.97%, whereas, straws of sorghum and paddy had low (0.23% level. Ca content in green fodder was 0.38 percent. Concentrate ingredients were particularly low (0.22% in Ca. The phosphorus (P content in crop residues and green fodders was 0.14 and 0.19 per cent, respectively, which was low, but higher (0.67% in concentrate ingredients. The magnesium (Mg content in roughages and concentrate ingredients was 0.38 and 0.32 percent, respectively. The sulphur (S content was deficient in concentrate ingredients (0.13% and crop residues (0.12%. Cobalt (Co was deficient in the diet of animals; however, iron and manganese levels in most of the feed ingredients were adequate. The average copper (Cu content was low in dry and green fodders (7.34 ppm, whereas, concentrate ingredients were better source of Cu (15.19 ppm. Molybdenum (Mo content in feeds was within the safe limit (average level<0.31 ppm. Selenium (Se content in most of the feed and fodders was adequate (0.40 ppm. Zinc (Zn was deficient in most of the feedstuffs (average level<35.0 ppm. From the present study, it was apparent that certain minerals such as Ca, P, S, Zn, Cu and Co were deficient in the diet and needed to be supplemented.

The mineral composition of five insects as sold for human ...

African Journals Online (AJOL)

Edible insects have been proposed as an alternative protein source that is economically and environmentally preferable to livestock, and certain species may be high in nutrients that benefit human health. We present data describing the mineral content of five edible insects as sold in South Africa and Zimbabwe. We report ...

Unification of reactor elastomeric sealing based on material

International Nuclear Information System (INIS)

Sinha, N.K.; Raj, Baldev

2012-01-01

The unification of elastomeric sealing applications of Indian nuclear reactors based on a few qualified fluoroelastomer/perfluoroelastomer compounds and standardized approaches for finite element analysis (FEA) based design, manufacturing process and antifriction coatings is discussed. It is shown that the advance polymer architecture based Viton ® formulation developed for inflatable seals of 500 MWe Prototype Fast Breeder Reactor (PFBR) and its four basic variations can encompass other sealing applications of PFBR with minimum additional efforts on development and validation. Changing the blend ratio of Viton ® GBL 200S and 600S in inflatable seal formulation could extend its use to Pressurized Heavy Water Reactors (PHWRs). The higher operating temperature of Advanced Heavy Water Reactor (AHWR) seals expands the choice to perfluoroelastomers. FEA based on plane-strain/axisymmetric modeling (with Mooney–Rivlin as the basic constitutive model), seal manufacture by cold feed extrusion and injection molding as well as plasma Teflon-like coating belonging to two variations obtained from the development of inflatable seals provide the necessary standardization for unification. The gains in simplification of design, development and operation of seals along with the enhancements of safety and reliability are expected to be substantial.

[Pneumoconiosis in bauxite miners].

Science.gov (United States)

Molinini, R; Pesola, M; Digennaro, M A; Carino, M; Nuzzaco, A; Coviello, F

1985-01-01

The authors examined a group of 40 miners who were being working at an Apulian bauxite mine, presently inactive. Radiographic findings of pulmonary micronodulation without significant reduction of lung functions were showed in 15 miners. Mineralogical analysis of mine dust samples excluded any presence of more than 1% free silica. As a result of this study hypotheses have been formulated about pathogenesis of this moderated and non-invasive pneumoconiosis, showed in long exposed subjects to low silica content dusts.

Formation of secondary minerals in a lysimeter approach - A mineral-microbe interaction

Science.gov (United States)

Schäffner, F.; Merten, D.; De Giudici, G.; Beyer, A.; Akob, D. M.; Ricci, P. C.; Küsel, K.; Büchel, G.

2012-04-01

Heavy metal contamination of large areas due to uranium mining operations poses a serious long-term environmental problem. In the Ronneburg district (eastern Thuringia, Germany), leaching of low grade uranium bearing ores (uranium content metals, especially Cd, Ni, Co, Cu and Zn due to a residual contamination even after remediation efforts. To reveal the processes of secondary mineral precipitation in the field a laboratory lysimeter approach was set up under in situ-like conditions. Homogenized soil from the field site and pure quartz sand were used as substrates. In general, in situ measurements of redox potentials in the substrates showed highly oxidizing conditions (200-750 mV). Water was supplied to the lysimeter from below via a mariottés bottle containing contaminated groundwater from the field. Evaporation processes were allowed, providing a continuous flow of water. This led to precipitation of epsomite and probably aplowite on the top layer of substrate, similar to what is observed in field investigations. After 4 weeks, the first iron and manganese bearing secondary minerals became visible. Soil water samples were used to monitor the behaviour of metals within the lysimeter. Saturation indices (SI) for different secondary minerals were calculated with PHREEQC. The SI of goethite showed oversaturation with respect to the soil solution. SEM-EDX analyses and IR spectroscopy confirmed the formation of goethite. Geochemical data revealed that goethite formation was mainly dominated by Eh/pH processes and that heavy metals, e.g. Zn and U, could be enriched in this phase. Although Eh/pH data does not support formation of manganese minerals, Mn(II)-oxidizing bacteria (MOB) could be isolated from field soil samples, supporting the fact that microorganisms may influence this natural attenuation process. Laser ablation ICP-MS data reveal accumulation of manganese in MOB biomass on Mn(II)-containing agar plates. Furthermore, it was possible to show the importance

Some Anti-Nutritional and Mineral Contents of Extra-Cotyledonous ...

African Journals Online (AJOL)

The edible extra-cotyledonous deposit of Pride of Barbados (Caesalpina pulcherrima) was investigated for some minerals and antinutritional factors. Results obtained showed that while phytohaemagglutinin was absent, vanadium was very low in the extra-cotyledons of this legume. However, oxalate, trypsin inhibitor, ...

Mineral composition of organically grown tomato

Science.gov (United States)

Ghambashidze, Giorgi

2014-05-01

In recent years, consumer concerns on environmental and health issues related to food products have increased and, as a result, the demand for organically grown production has grown. Results indicate that consumers concerned about healthy diet and environmental degradation are the most likely to buy organic food, and are willing to pay a high premium. Therefore, it is important to ensure the quality of the produce, especially for highly consumed products. The tomato (Lycopersicon esculentum) is one of the most widely consumed fresh vegetables in the world. It is also widely used by the food industries as a raw material for the production of derived products such as purees or ketchup. Consequently, many investigations have addressed the impact of plant nutrition on the quality of tomato fruit. The concentrations of minerals (P, Na, K, Ca and Mg) and trace elements (Cu, Zn and Mn) were determined in tomatoes grown organically in East Georgia, Marneuli District. The contents of minerals and Mn seem to be in the range as shown in literature. Cu and Zn were found in considerably high amounts in comparison to maximum permissible values established in Georgia. Some correlations were observed between the minerals and trace elements studied. K and Mg were strongly correlated with Cu and Zn. Statistically significant difference have shown also P, K and Mg based between period of sampling.

Proximate Composition, Nutritional Attributes and Mineral Composition of Peperomia pellucida L. (Ketumpangan Air Grown in Malaysia

Directory of Open Access Journals (Sweden)

Maznah Ismail

2012-09-01

Full Text Available This study presents the proximate and mineral composition of Peperomia pellucida L., an underexploited weed plant in Malaysia. Proximate analysis was performed using standard AOAC methods and mineral contents were determined using atomic absorption spectrometry. The results indicated Peperomia pellucida to be rich in crude protein, carbohydrate and total ash contents. The high amount of total ash (31.22% suggests a high-value mineral composition comprising potassium, calcium and iron as the main elements. The present study inferred that Peperomia pellucida would serve as a good source of protein and energy as well as micronutrients in the form of a leafy vegetable for human consumption.

Applications of the direct photon absorption technique for measuring bone mineral content in vivo. Determination of body composition in vivo

Science.gov (United States)

Cameron, J. R.

1972-01-01

The bone mineral content, BMC, determined by monoenergetic photon absorption technique, of 29 different locations on the long bones and vertebral columns of 24 skeletons was measured. Compressive tests were made on bone from these locations in which the maximum load and maximum stress were measured. Also the ultimate strain, modulus of elasticity and energy absorbed to failure were determined for compact bone from the femoral diaphysis and cancellous bone from the eighth through eleventh thoracic vertebrae. Correlations and predictive relationships between these parameters were examined to investigate the applicability of using the BMC at sites normally measured in vivo, i.e. radius and ulna in estimating the BMC and/or strength of the spine or femoral neck. It was found that the BMC at sites on the same bone were highly correlated r = 0.95 or better; the BMC at sites on different bones were also highly interrelated, r = 0.85. The BMC at various sites on the long bones could be estimated to between 10 and 15 per cent from the BMC of sites on the radius or ulna.

The mineral matter characteristics of some Chinese coal

Energy Technology Data Exchange (ETDEWEB)

Liu, X. [China University of Mining and Technology (China). Dept. of Coal Preparation and Utilization

1994-12-01

The mineral matter has been separated from 18 coal samples with a low temperature ashes and analyzed by means of X-ray diffraction method. Based on the results of chemical analysis of the coal ash, with reference to the standard composition of minerals, the content of various mineral phases in the coal ash has been determined. Furthermore, this paper summarizes the mineral matter characteristics of the coal samples and discusses the relationship between the composition of mineral matter in coal and its depositional environment.

Influence of rootstocks on growth, yield, fruit quality and leaf mineral element contents of pear cv. 'Santa Maria' in semi-arid conditions

Directory of Open Access Journals (Sweden)

Ali Ikinci

2014-01-01

Full Text Available BACKGROUND: Rootstocks play an essential role to determining orchard performance of fruit trees. Pyrus communisand Cydonia oblonga are widely used rootstocks for European pear cultivars. The lack of rootstocks adapted to different soil conditions and different grafted cultivars is widely acknowledged in pear culture. Cydonia rootstocks (clonal and Pyrus rootstocks (seedling or clonal have their advantages and disadvantages. In each case, site-specific environmental characteristics, specific cultivar response and production objectives must be considered before choosing the best rootstock. In this study, the influence of three Quince (BA 29, Quince A = MA, Quince C = MC and a local European pear seedling rootstocks on the scion yield, some fruit quality characteristics and leaf macro (N, P, K, Ca and Mg and micro element (Fe, Zn, Cu, Mn and B content of 'Santa Maria' pear (Pyrus communis L. were investigated. RESULTS: Trees on seedling rootstock had the highest annual yield, highest cumulative yield (kg tree−1, largest trunk cross-sectional area (TCSA, lowest yield efficiency and lowest cumulative yield (ton ha−1 in the 10th year after planting. The rootstocks had no significant effect on average fruit weight and fruit volume. Significantly higher fruit firmness was obtained on BA 29 and Quince A. The effect of rootstocks on the mineral element accumulation (N, K, Ca, Mg, Fe, Zn, Cu, Mn and B was significant. Leaf analysis showed that rootstocks used had different mineral uptake efficiencies throughout the early season. CONCLUSION: The results showed that the rootstocks strongly affected fruit yield, fruit quality and leaf mineral element uptake of 'Santa Maria' pear cultivar. Pear seedling and BA 29 rootstock found to be more prominent in terms of several characteristics for 'Santa Maria' pear cultivar that is grown in highly calcareous soil in semi-arid climate conditions. We determined the highest N, P (although insignificant, K, Ca, Mg, Fe

The relational of Mesozoic volcanism to uranium mineralization in Guyuan-Hongshanzi area

International Nuclear Information System (INIS)

Wu Rengui; Xu Zhe; Yu Zhenqing; Jiang Shan; Shen Kefeng

2011-01-01

Based on the time of Mesozoic volcanism,the characteristic of major and trace element, and REE pattern of the volcanic rocks in Guyuan-Hongshanzi area, The Mesozoic volcanism can be divided into the early cycle and later cycle during the Early Cretaceous, and it's magma series is classified in two sub-series, one is alkaline series of trachyte dominated and another is subalkaline series of rhyolite dominated. The relations between Mesozoic volcanism and uranium mineralization is mainly shown in four aspects: (1) Uranium mineralization controlled by the coexist of two magma series; (2) Uranium mineralization controlled by superhypabyssal porphyry body in later cycle volcanism during the Early Cretaceous; (3) The porphyry body close to uranium mineralization,bearing the genesis characteristics of crust-mantle action; and (4) High Si and K content in the chemical composition of the mineralization volcanic rocks. (authors)

Gold contents of sulfide minerals in granitoids from southwestern New Brunswick, Canada

Science.gov (United States)

Yang, Xue-Ming; Lentz, David R.; Sylvester, Paul J.

2006-07-01

The abundance of gold and selected trace elements in magmatic sulfide and rock-forming minerals from Silurian-Devonian granitoids in southwestern New Brunswick were quantitatively analyzed by laser-ablation inductively coupled plasma mass-spectrometry. Gold is mainly hosted in sulfide minerals (i.e., chalcopyrite, pyrrhotite, and pyrite), in some cases perhaps as submicron inclusions (nanonuggets). Gold is below detection (caca % qGTbGaaeyzaiaabYgacaqG0baaaOGaeyypa0JaaGymaiaaiwdacaaI % WaGaeyySaeRaaGioaiaaiodacaGGSaGaaeiiaiaabggacaqGUbGaae % izaiaabccacaWGebWaa0baaSqaaiaabgeacaqG1baabaGaaeiCaiaa % bMhacaqGVaGaaeyBaiaabwgacaqGSbGaaeiDaaaakiabg2da9iaaio % dacaaI2aGaaGOmaiabgglaXkaaiMdacaaI2aaaaa!6E8F! D^{{{text{cpy/melt}}}}_{{{text{Au}}}}= 948 ± 269,{text{ }}D^{{{text{po/melt}}}}_{{{text{Au}}}} = 150 ± 83,{text{ and }}D^{{{text{py/melt}}}}_{{{text{Au}}}} = 362 ± 96. This result suggests that gold behavior in the granitoid systems is controlled by the conditions of sulfur saturation during magmatic evolution; the threshold of physiochemical conditions for sulfur saturation in the melts is a key factor affecting gold activity. Gold behaves incompatibly prior to the formation of sulfide liquids or minerals, but it becomes compatible at their appearance. Gold would be enriched in sulfur-undersaturated granitoid magmas during fractionation, partitioning into evolved magmatic fluids and favoring the formation of intrusion-related gold deposits. However, gold becomes depleted in residual melts if these melts become sulfur-saturated during differentiation, leading to gold precipitation in the early sulfide phases of a granitoid suite. Late-stage Cl-bearing magmatic-hydrothermal fluids with low pH and relatively high oxidation state derived from either progressively cooling magmas at depth or convective circulation of meteoric water buffered by reduced carbon-bearing sediments, may scavenge gold from early sulfide minerals. If a significant amount of gold produced in this

Cultivar and Harvest Month Influence the Nutrient Content of Opuntia spp. Cactus Pear Cladode Mucilage Extracts

Directory of Open Access Journals (Sweden)

Alba du Toit

2018-04-01

Full Text Available Mucilage extracted from cactus pear cladodes is a hydrocolloid gum. It is a novel, natural, low-kilojoule, cost-effective texture-modifying ingredient in functional food products. Yet, the cultivar with the most optimal nutrient content and the preferred harvest times are as yet unknown. For this reason, mucilage from three Opuntia ficus-indica (Algerian, Morado and Gymno-Carpo and one Opuntia robusta (Robusta cultivar were investigated to determine their nutrient content over six months. Nutrients that contribute energy (10.2 kJ/g were low. The mineral content was high (ash 17.7/100 g, particularly calcium (3.0 g/100 g and phosphorous (109.5 mg/kg. Low insoluble acid-detergent fibre (1.4 g/kg and neutral-detergent fibre (2.1 g/kg values indicated that mucilage was mostly soluble fibre. Calcium oxalate crystals were not detected in dried mucilage. Opuntia robusta powders had higher protein, extractable fat and potassium content, while Opuntia ficus-indica mucilage powders had higher polyunsaturated (Linoleic and α-Linolenic acid fat content. O. robusta Robusta mucilage, harvested after the fruit harvest (February had the lowest energy content and the highest mineral and protein content. Mucilage powders were highly soluble, low-kilojoule and mineral-rich. This is a functional ingredient that is produced from an easily cultivated crop, as cactus pears grow in areas with poor soil, extremely high daytime temperatures and limited water supplies.

Divergent Significance of Bone Mineral Density Changes in Aging Depending on Sites and Sex Revealed through Separate Analyses of Bone Mineral Content and Area

Directory of Open Access Journals (Sweden)

Yasumoto Matsui

2012-01-01

Full Text Available Bone mineral density (aBMD is equivalent to bone mineral content (BMC divided by area. We rechecked the significance of aBMD changes in aging by examining BMC and area separately. Subjects were 1167 community-dwelling Japanese men and women, aged 40–79 years. ABMDs of femoral neck and lumbar spine were assessed by DXA twice, at 6-year intervals. The change rates of BMC and area, as well as aBMD, were calculated and described separately by the age stratum and by sex. In the femoral neck region, aBMDs were significantly decreased in all age strata by an increase in area as well as BMC loss in the same pattern in both sexes. In the lumbar spine region, aBMDs decreased until the age of 60 in women, caused by the significant BMC decrease accompanying the small area change. Very differently in men, aBMDs increased after their 50s due to BMC increase, accompanied by an area increase. Separate analyses of BMC and area change revealed that the significance of aBMD changes in aging was very divergent among sites and between sexes. This may explain in part the dissociation of aBMD change and bone strength, suggesting that we should be more cautious when interpreting the meaning of aBMD change.

Comparison of calcium carbonate and aluminium hydroxide as phosphate binders on biochemical bone markers, PTH(1-84), and bone mineral content in dialysis patients

DEFF Research Database (Denmark)

Jespersen, B; Jensen, J D; Nielsen, H K

1991-01-01

Bone mineral content, estimated by single-photon absorptiometry of the forearm, serum values of intact parathyroid hormone (PTH(1-84], osteocalcin, alkaline phosphatase, 1,25-dihydroxycholecalciferol (1,25(OH)2D3), and aluminium were determined during treatment with calcium carbonate (CaCO3......) or aluminium hydroxide (Al(OH)3) in 11 dialysis patients participating in a randomised cross-over study. Each treatment period lasted 6 months. Serum phosphorus was maintained in the range 1.5-2.0 mmol/l. During Al(OH)3 treatment bone mineral content (BMC) decreased by 11% per half-year (mean), but only by 3...... 0.05), osteocalcin decreased (89% versus 117%, P less than 0.01), alkaline phosphatase decreased (92% versus 116%, P less than 0.05), and aluminium decreased (56% versus 189%, P less than 0.05). 1,25(OH)2D3 remained unchanged in both periods. No increase in soft-tissue calcification was demonstrated...

THE USE OF FLUORIDE CONTAINING MINERAL WATER IN WORT PRODUCTION

Directory of Open Access Journals (Sweden)

Gunka Yonkova

2011-12-01

Full Text Available The present work aims to study the quality of wort produced using fluoride containing mineral water. The results show that the mineral water has a negative impact on the enzymatic destruction of starch, proteins, color intensity and pH of the wort. The changes of pH during mashing process using tap and mineral water was studied. The lower acidity of wort obtained using mineral water didn’t change during the brewing process. The fluoride content of beer is lower than 5 mg.L-1 when wort is produced using mineral and tap water in 1:1 ratio and citric acid for pH correction. At the same time, the final degree of fermentation, α-amine nitrogen content and the intensity of color of produced wort are close to the control sample. The changes in fluoride ion concentration are monitored using ion-selective potentiometry. The fluoride content is decreased from 5.7 to 4.75 mg.L-1, the most intense change is observed during the mashing process.

Immobilization of actinides in stable mineral type and ceramic materials (high temperature synthesis)

Energy Technology Data Exchange (ETDEWEB)

Starkov, O.; Konovalov, E.

1996-05-01

Alternative vitrification technologies are being developed in the world for the immobilization of high radioactive waste in materials with improved thermodynamic stability, as well as improved chemical and thermal stability and stability to radiation. Oxides, synthesized in the form of analogs to rock-forming minerals and ceramics, are among those materials that have highly stable properties and are compatible with the environment. In choosing the appropriate material, we need to be guided by its geometric stability, the minimal number of cations in the structure of the material and the presence of structural elements in the mineral that are isomorphs of uranium and thorium, actinoids found in nature. Rare earth elements, yttrium, zirconium and calcium are therefore suitable. The minerals listed in the table (with the exception of the zircon) are pegatites by origin, i.e. they are formed towards the end of the magma crystallization of silicates form the residual melt, enriched with Ta, Nb, Ti, Zr, Ce, Y, U and Th. Uranium and thorium in the form of isomorphic admixtures form part of the lattice of the mineral. These minerals, which are rather simple in composition and structure and are formed under high temperatures, may be viewed as natural physio-chemical systems that are stable and long-lived in natural environments. The similarity of the properties of actinoids and lanthanoids plays an important role in the geochemistry of uranium and thorium; however, uranium (IV) is closer to the {open_quotes}heavy{close_quotes} group of lanthanoids (the yttrium group) while thorium (IV) is closer to the {open_quotes}light{close_quotes} group (the cerium group). That is why rare earth minerals contain uranium and thorium in the form of isomorphic admixtures.