WorldWideScience

Sample records for ela the european laser

  1. The European answer to the integration issues of excimer laser annealing in MOS technology

    International Nuclear Information System (INIS)

    Privitera, V.; La Magna, A.; Fortunato, G.; Camalleri, M.; Magri, A.; Simon, F.; Svensson, B.G.

    2004-01-01

    Excimer laser annealing (ELA) of MOSFET devices is currently studied and evaluated within the frame of the IST project 'Fundamentals and applications of laser processing for highly innovative MOS technology' (FLASH), funded by the European Commission. This European consortium aim to demonstrate that ELA can be industrialized in the context of semiconductor device fabrication. The technical achievement of homogeneous irradiation of entire wafers by industrial line beam system set up has been combined with device design solutions, in order to avoid the detrimental effects of the laser beam on device structures and tackle the integration issues, main obstacles for the use of ELA in the semiconductor industry. The launch of ELA, to open a new market segment in the semiconductor industry, implies also the availability of reliable process simulation tools. Therefore, a simulation program based on the phase-field method was produced, fully working and available

  2. Spatial variability and trends in Younger Dryas equilibrium line altitudes across the European Alps using a hypsometrically based ELA model: results and implications

    Science.gov (United States)

    Keeler, D. G.; Rupper, S.; Schaefer, J. M.; Finkel, R. C.; Maurer, J. M.

    2016-12-01

    Alpine glaciers constitute an important component of terrestrial paleoclimate records due to, among other characteristics, their high sensitivity to climate change, near global extent, and their integration of myriad climate variables into a single, easily detected signal. Because the glacier equilibrium line altitude (ELA) provides a more explicit representation of climate than many other glacier properties, ELA methods allow for more direct comparisons of multiple glaciers within or between regions. Such comparisons allow for more complete investigations of the ultimate causes of mountain glaciation during specific events. Many studies however tend to focus on a limited number of sites, and employ a large variety of different techniques for ELA reconstruction between studies, making wider climate implications more tenuous. Methods of ELA reconstruction that can be rapidly and consistently applied to an arbitrary number of paleo-glaciers would provide a more accurate portrayal of the changes in climate across a given region. Here we present ELA reconstructions from Egesen Stadial moraines across the European Alps using an ELA model accounting for differences in glacier width, glacier shape, bed topography, ice thickness, and glacier length, including several glaciers constrained to the Younger Dryas using surface exposure dating techniques. We compare reconstructed Younger Dryas ELA values to modern ELA values using the same model, or using end of summer snowline estimates where no glacier is currently present. We further provide uncertainty estimates on the ΔELA using bootstrapped Monte Carlo simulations for the various input parameters. Preliminary results compare favorably to previous glacier studies of the European Younger Dryas, but provide greater context from many glaciers across the region as a whole. Such results allow for a more thorough investigation of the spatial variability and trends in climate during the Younger Dryas across the European Alps, and

  3. Perspectives and advantages of the use of excimer laser annealing for MOS technology

    International Nuclear Information System (INIS)

    Privitera, V.; Alippi, P.; Camalleri, M.

    2006-01-01

    The integration of excimer laser annealing (ELA) into the MOS device technology has been studied and evaluated within the frame of the IST project FLASH (Fundamentals and applications of laser processing for highly innovative MOS technology), funded by the European Commission. The final aim of the project was to demonstrate that ELA can be applied as a reliable, effective and advantageous process in the context of semiconductor device fabrication. Some of the results of this activity are summarised, relative to the experimental characterization and theoretical modelling. The electrical characterization of the transistor fabricated by ELA is also presented, showing a device yield of 90% on wafer

  4. Climate Reconstructions of the Younger Dryas: An ELA Model Investigating Variability in ELA Depressions, Temperature, and Precipitation Changes for the Graubϋnden Alps

    Science.gov (United States)

    Keeler, D. G.; Rupper, S.; Schaefer, J. M.; Finkel, R. C.

    2015-12-01

    The high sensitivity of mountain glaciers to even small perturbations in climate, combined with a near global distribution, make alpine glaciers an important target for terrestrial paleoclimate reconstructions. The geomorphic remnant of past glaciers can yield important insights into past climate, particularly in regions where other methods of reconstruction are not possible. The quantitative conversion of these changes in geomorphology to a climate signal, however, presents a significant challenge. A particular need exists for a versatile climate reconstruction method applicable to diverse glacierized regions around the globe. Because the glacier equilibrium line altitude (ELA) provides a more explicit comparison of climate than properties such as glacier length or area, ELA methods lend themselves well to such a need, and allow for a more direct investigation of the primary drivers of mountain glaciations during specific events. Here, we present an ELA model for quantifying changes in climate based on changes in glacier extent, while accounting for differences in glacier width, glacier shape, bed topography, ice thickness, and glacier length. The model furthermore provides bounds on the ΔELA using Monte Carlo simulations. These methods are validated using published mass balances and ELA measurements from 4 modern glaciers in the European Alps. We then use this ELA model, combined with a surface mass and energy balance model, to estimate the changes in temperature/precipitation between the Younger Dryas (constrained by 10Be surface exposure ages) and the present day for three glacier systems in the Graubϋnden Alps. Our results indicate an ELA depression in this area of 257 m ±45 m during the Younger Dryas (YD) relative to today. This corresponds to a 1.3 °C ±0.36 °C decrease in temperature or a 156% ±30% increase in precipitation relative to today. These results indicate the likelihood of a predominantly temperature-driven change rather than a strong

  5. ELA AS DEPICTED IN BRHATRAYI

    OpenAIRE

    Nair, K. Vasudevan; Holla, B.V.; Yoganarasimhan, S.N.

    1984-01-01

    The types of Ela as accounted in the Brhatrayi is analysed. It is clarified that only Ela proper and Suksmela are mentioned in the Brhatrayi and Brhat ela is the inclusion of Nighantu scholars. The correct botanical identity. Details of Ayurvedic synonyms and their interpretation are presented

  6. Effect of laser-plasma X-ray irradiation on crystallization of amorphous silicon film by excimer laser annealing

    International Nuclear Information System (INIS)

    Matsuo, Naoto; Uejukkoku, Kazuya; Heya, Akira; Takanashi, Yasuyuki; Amano, Sho; Miyamoto, Shuji; Mochizuki, Takayasu

    2007-01-01

    The effect of laser plasma soft X-ray (LPX) irradiation on crystallization by excimer laser annealing (ELA) was investigated at low ELA energy densities. The crystalline fraction at energy densities of 50 and 60 mJ/cm 2 for LPX followed by ELA is nearly equal to that at 80 to 100 mJ/cm 2 for the ELA method with non-LPX irradiation. The results obtained indicate that LPX irradiation before ELA reduces the critical energy density for the start of crystallization. The combined method of LPX irradiation and ELA will enable us to realize a low-temperature process for ELA crystallization. (author)

  7. Simplifying the ELA Common Core; Demystifying Curriculum

    Science.gov (United States)

    Schmoker, Mike; Jago, Carol

    2013-01-01

    The English Language Arts (ELA) Common Core State Standards ([CCSS], 2010) could have a transformational effect on American education. Though the process seems daunting, one can begin immediately integrating the essence of the ELA Common Core in every subject area. This article shows how one could implement the Common Core and create coherent,…

  8. Calculation of former ELA depressions in the Himalaya - a comparative analysis

    Science.gov (United States)

    Wagner, M.

    2009-04-01

    For the reconstruction of former Equilibrium Line Altitudes (ELA) and ELA depressions in the Himalaya, the group of the Toe-to-Summit-Altitude-Methods (TSAM) is most suited. In this investigation the Kuhle (1986) method that is particularly tailored to the extreme high mountain relief, as well as the widely used Höfer (1879) method and Louis (1954/55) method, have been applied. Applying the relief specific correction factor FSD (Factor for snowline deviation) in the Kuhle method, it is thereby possible to simulate the shifting position of the ELA within the vertical extension of the glacier in dependence on the relief characteristics and glacial type. The results of this work, carried out along the Kali Gandaki in central Nepal, illustrate that as a rule, the Louis method results in the highest ELAs and the lowest ELA depressions, while the Höfer method yields the lowest ELAs and the highest ELA depressions. In affirmation of the literature, the Louis method tends to overestimate the ELA, since using the maximum peak height, especially for large glaciers in mountain ranges with high relief energy, leads to an overly high position of the glacier upper limit. With respect to the Höfer method, the suspicion already voiced by Höfer (1879) himself, that with the use of his method, the for the Himalaya typically high elevated, and with marginal gradient toward the valley moving ridge progressions, would lead to a too low ELA, can be affirmed. Clearly to be disputed, however, is the statement of Gross et al. (1976) that the Höfer method leads to an overestimation of the ELA. The reason for this can be found in a wrong computation of the mean ridge height above the ELA and consequently of the ELA itself within the Höfer method, based on the erroneous assumption that otherwise the ELA could not be calculated due to a circular conclusion (Gross et al. 1976). As is evidenced by this study, the Kuhle method mediates between the empiric overly high values of the Louis

  9. ELA-max: A new topical lidocaine formulation.

    Science.gov (United States)

    Goldman, Ran D

    2004-05-01

    To evaluate the role of a new formulation of lidocaine (ELA-max) in local anesthesia in children and compare it with the eutectic mixture of local anesthetics (EMLA). Relevant literature was identified by a MEDLINE search (1966-November 2003) using the search terms ELA-max and EMLA. Bibliographies of selected articles were also examined to include all relevant investigations. The product manufacturer was contacted for inclusion of the most recent data available. Topical anesthesia in children is clinically challenging. ELA-max has been shown to be as effective as EMLA for venipuncture in children, but with faster onset. Adverse effects, such as transient blanching with redness and erythema, have been reported. Further investigation is needed to determine the effectiveness of ELA-max on other painful procedures in children, as well as its safety.

  10. Excimer laser annealing of shallow As and B doped layers

    International Nuclear Information System (INIS)

    Monakhov, E.V.; Svensson, B.G.; Linnarsson, M.K.; Magna, A. La; Privitera, V.; Camalleri, M.; Fortunato, G.; Mariucci, L.

    2004-01-01

    Excimer laser annealing (ELA) of As-, B- and BF 2 -implanted Si has been studied by secondary ion mass spectrometry (SIMS), spreading resistance probe (SRP) and transmission electron microscopy (TEM). The implantations have been performed in the energy range from 1 to 30 keV with doses of 10 15 -10 16 cm -2 . ELA has been carried out with the energy densities in the range of 600-1200 mJ/cm 2 and the number of laser pulses from 1 to 10. It is shown that ELA results in a more uniform dopant distribution over the doped region with a more abrupt profile edge as compared to those after rapid thermal annealing (RTA). Besides, in contrast to RTA, ELA demonstrates a highly confined annealing effect, where the distribution of dopants below the melting region is not affected. SRP measurements demonstrate almost complete activation of the implanted dopants after ELA, and TEM does not reveal extended defects in the ELA-treated samples. The depth of the doped layers, abruptness of the profiles and the total doping dose as a function of ELA energy density and number of laser pulses are investigated. Computer simulations of ELA show a good agreement with the experimental data

  11. HiPER: The European path to laser energy

    Directory of Open Access Journals (Sweden)

    Edwards Chris

    2013-11-01

    Full Text Available While for decades, energy production relying on laser inertial fusion has been a strong motivation for the development in Europe of a few high-energy laser facilities and dedicated scientific programs, the HiPER initiative launched in 2004 fostered an ambitious large-scale coordinated European program toward inertial fusion energy. Anticipating the successful demonstration of fusion ignition and gain at the National Ignition Facility (NIF in the USA, scientists and engineers from across Europe are developing the case for a next generation laser fusion facility, HiPER, to be constructed in Europe. The single-facility build strategy of HiPER (High Power Laser Energy Research Facility aims at first demonstrating some key elements of a fusion reactor in a high rep-rate few-second cycle mode, before addressing energy production on a high rep-rate continuous mode in a second area.

  12. Boron distribution in silicon after multiple pulse excimer laser annealing

    International Nuclear Information System (INIS)

    Monakhov, E.V.; Svensson, B.G.; Linnarsson, M.K.; La Magna, A.; Italia, M.; Privitera, V.; Fortunato, G.; Cuscuna, M.; Mariucci, L.

    2005-01-01

    We have studied B redistribution in Si after excimer laser annealing (ELA) with multiple laser pulses. B was implanted with energies of 1 and 10 keV and doses of 1x10 14 and 1x10 15 cm -2 . ELA with the number of pulses from 1 to 100 was performed at room temperature and 450 deg. C in vacuum. Irrespective of the implantation parameters and the ELA conditions used, a pile-up in the B concentration is observed near the maximum melting depth after ten pulses of ELA. Moreover, a detailed study has revealed that B accumulates at the maximum melt depth gradually with the number of ELA pulses. Besides, an increase in the carrier concentration is observed at the maximum melt depth, suggesting electrical activity of the accumulated B. Formation of Si-B complexes and vacancy accumulation during multiple ELA are discussed as possible mechanisms for the B build-up

  13. Laser-assisted lead extraction: the European experience.

    Science.gov (United States)

    Kennergren, C; Bucknall, C A; Butter, C; Charles, R; Fuhrer, J; Grosfeld, M; Tavernier, R; Morgado, T B; Mortensen, P; Paul, V; Richter, P; Schwartz, T; Wellens, F

    2007-08-01

    The aim of this study is to investigate the safety and effectiveness of Excimer laser-assisted lead extraction in Europe. The final European multi-centre study experience is presented. The Excimer is a cool cutting laser (50 degrees C) with a wavelength of 308 nm. The energy is emitted from the tip of a flexible sheath and is absorbed by proteins and lipids, 64% of the energy is absorbed at a tissue depth of 0.06 mm. The sheath is positioned over the lead, and the fibrosis surrounding the lead is vaporized while advancing the sheath without damaging other leads. From August 1996 to March 2001, 383 leads (170 atrial, 213 ventricular) in 292 patients (mean age 61.6 years, range 13-96) were extracted at 14 European centres. Mean implantation time was 74 months (3-358). Most frequent indications were pocket infection (26%), non-functional leads (21%), patient morbidity (21%), septicaemia or endocarditis (14%), erosion (5%), and lead interference (8%). Median extraction time was 15 min (1-300). Complete extraction was achieved in 90.9% of the leads and partial extraction in 3.4%. Extraction failed in 5.7% of the leads. Major complications = perforations caused 10/22 (3.4/5.7%) of the failures. Most partially extracted patients were considered clinically successful, as only minor lead parts without clinical significance were left. Femoral non-laser technique was used to remove 8/12 of the non-complication failures. The total complication rate, including five minor complications (1.7%), was 5.1%. No in-hospital mortality occurred. Pacing and implantable cardioverter-defibrillator leads can safely, effectively, and predictably be extracted. Open-heart extractions can be limited to special cases. The results indicate that the traditional policy of abandoning redundant leads, instead of removing them, may be obsolete in many patients.

  14. Structural and morphological transformations of TiO2 nanotube arrays induced by excimer laser treatment

    International Nuclear Information System (INIS)

    Hsu, Ming-Yi; Thang, Nguyen Van; Wang Chih; Leu Jihperng

    2012-01-01

    The structural and morphological transformations of TiO 2 nanotube arrays (TNAs) treated by excimer laser annealing (ELA) were investigated as a function of the laser fluence using parallel and tilted modes. Results showed that the crystallinity of the ELA-treated TNAs reached only about 50% relative to that of TNAs treated by furnace anneal at 400 °C for 1 h. The phase transformation starts from the top surface of the TNAs with surface damage resulting from short penetration depth and limited one-dimensional heat transport from the surface to the bottom under extremely short pulse duration (25 ns) of the excimer laser. When a tilted mode was used, the crystallinity of TNAs treated by ELA at 85° was increased to 90% relative to that by the furnace anneal. This can be attributed to the increased area of the laser energy interaction zone and better heat conduction to both ends of the TNAs. - Highlights: ► We examined the morphology and microstructure of TNAs treated by ELA. ► Crystallinity of parallel ELA-treated TNAs reached ∼50% of furnace anneal. ► Tilted ELA at 85o enhanced the degree of crystallization in TNAs to 90%.

  15. Characterization of pancreatic lesions from MT-tgf alpha, Ela-myc and MT-tgf alpha/Ela-myc single and double transgenic mice.

    Science.gov (United States)

    Liao, Dezhong Joshua; Wang, Yong; Wu, Jiusheng; Adsay, Nazmi Volkan; Grignon, David; Khanani, Fayyaz; Sarkar, Fazlul H

    2006-07-05

    In order to identify good animal models for investigating therapeutic and preventive strategies for pancreatic cancer, we analyzed pancreatic lesions from several transgenic models and made a series of novel findings. Female MT-tgf alpha mice of the MT100 line developed pancreatic proliferation, acinar-ductal metaplasia, multilocular cystic neoplasms, ductal adenocarcinomas and prominent fibrosis, while the lesions in males were less severe. MT-tgf alpha-ES transgenic lines of both sexes developed slowly progressing lesions that were similar to what was seen in MT100 males. In both MT100 and MT-tgf alpha-ES lines, TGF alpha transgene was expressed mainly in proliferating ductal cells. Ela-myc transgenic mice with a mixed C57BL/6, SJL and FVB genetic background developed pancreatic tumors at 2-7 months of age, and half of the tumors were ductal adenocarcinomas, similar to what was reported originally by Sandgren et al 1. However, in 20% of the mice, the tumors metastasized to the liver. MT100/Ela-myc and MT-tgf alpha-ES/Ela-myc double transgenic mice developed not only acinar carcinomas and mixed carcinomas as previously reported but also various ductal-originated lesions, including multilocular cystic neoplasms and ductal adenocarcinomas. The double transgenic tumors were more malignant and metastasized to the liver at a higher frequency (33%) compared with the Ela-myc tumors. Sequencing of the coding region of p16ink4, k-ras and Rb cDNA in small numbers of pancreatic tumors did not identify mutations. The short latency for tumor development, the variety of tumor morphology and the liver metastases seen in Ela-myc and MT-tgf alpha/Ela-myc mice make these animals good models for investigating new therapeutic and preventive strategies for pancreatic cancer.

  16. Boron distribution in silicon after excimer laser annealing with multiple pulses

    International Nuclear Information System (INIS)

    Monakhov, E.V.; Svensson, B.G.; Linnarsson, M.K.; La Magna, A.; Italia, M.; Privitera, V.; Fortunato, G.; Cuscuna, M.; Mariucci, L.

    2005-01-01

    We have studied B re-distribution in Si after excimer laser annealing (ELA) with multiple laser pulses. B was implanted using both B and BF 2 ions with energies from 1 to 20 keV and doses of 1 x 10 14 and 1 x 10 15 cm -2 . ELA with the number of pulses from 1 to 100 was performed in vacuum with the sample kept at room temperature and 450 deg. C. Independently of the implantation parameters and the ELA conditions used, a peak in the B concentration is observed near the maximum melting depth after 10 pulses of ELA. A detailed study has revealed that B accumulates at the maximum melt depth gradually with the number of ELA pulses. An increase in the carrier concentration at the maximum melt depth is observed after ELA with 100 pulses. No structural defects have been detected by transmission electron microscopy in the region of the B accumulation

  17. Improvement of physical properties of IGZO thin films prepared by excimer laser annealing of sol–gel derived precursor films

    International Nuclear Information System (INIS)

    Tsay, Chien-Yie; Huang, Tzu-Teng

    2013-01-01

    Indium gallium zinc oxide (IGZO) transparent semiconductor thin films were prepared by KrF excimer laser annealing of sol–gel derived precursor films. Each as-coated film was dried at 150 °C in air and then annealed using excimer laser irradiation. The influence of laser irradiation energy density on surface conditions, optical transmittances, and electrical properties of laser annealed IGZO thin films were investigated, and the physical properties of the excimer laser annealed (ELA) and the thermally annealed (TA) thin films were compared. Experimental results showed that two kinds of surface morphology resulted from excimer laser annealing. Irradiation with a lower energy density (≤250 mJ cm −2 ) produced wavy and irregular surfaces, while irradiation with a higher energy density (≥350 mJ cm −2 ) produced flat and dense surfaces consisting of uniform nano-sized amorphous particles. The explanation for the differences in surface features and film quality is that using laser irradiation energy to form IGZO thin films improves the film density and removes organic constituents. The dried IGZO sol–gel films irradiated with a laser energy density of 350 mJ/cm 2 had the best physical properties of all the ELA IGZO thin films. The mean resistivity of the ELA 350 thin films (4.48 × 10 3 Ω cm) was lower than that of TA thin films (1.39 × 10 4 Ω cm), and the average optical transmittance in the visible range (90.2%) of the ELA 350 thin films was slightly higher than that of TA thin films (89.7%). - Highlights: • IGZO semiconductor films were prepared by laser annealing of sol–gel derived films. • Surface roughness and resistivity of ELA samples were affected by energy density. • The ELA 350 IGZO film exhibited the best properties among all of ELA IGZO films. • Transmittance and resistivity of ELA 350 films are greater than those of TA films

  18. Improvement of physical properties of IGZO thin films prepared by excimer laser annealing of sol–gel derived precursor films

    Energy Technology Data Exchange (ETDEWEB)

    Tsay, Chien-Yie, E-mail: cytsay@fcu.edu.tw; Huang, Tzu-Teng

    2013-06-15

    Indium gallium zinc oxide (IGZO) transparent semiconductor thin films were prepared by KrF excimer laser annealing of sol–gel derived precursor films. Each as-coated film was dried at 150 °C in air and then annealed using excimer laser irradiation. The influence of laser irradiation energy density on surface conditions, optical transmittances, and electrical properties of laser annealed IGZO thin films were investigated, and the physical properties of the excimer laser annealed (ELA) and the thermally annealed (TA) thin films were compared. Experimental results showed that two kinds of surface morphology resulted from excimer laser annealing. Irradiation with a lower energy density (≤250 mJ cm{sup −2}) produced wavy and irregular surfaces, while irradiation with a higher energy density (≥350 mJ cm{sup −2}) produced flat and dense surfaces consisting of uniform nano-sized amorphous particles. The explanation for the differences in surface features and film quality is that using laser irradiation energy to form IGZO thin films improves the film density and removes organic constituents. The dried IGZO sol–gel films irradiated with a laser energy density of 350 mJ/cm{sup 2} had the best physical properties of all the ELA IGZO thin films. The mean resistivity of the ELA 350 thin films (4.48 × 10{sup 3} Ω cm) was lower than that of TA thin films (1.39 × 10{sup 4} Ω cm), and the average optical transmittance in the visible range (90.2%) of the ELA 350 thin films was slightly higher than that of TA thin films (89.7%). - Highlights: • IGZO semiconductor films were prepared by laser annealing of sol–gel derived films. • Surface roughness and resistivity of ELA samples were affected by energy density. • The ELA 350 IGZO film exhibited the best properties among all of ELA IGZO films. • Transmittance and resistivity of ELA 350 films are greater than those of TA films.

  19. Strategic avionics technology definition studies. Subtask 3-1A: Electrical Actuation (ELA) systems

    Science.gov (United States)

    Pond, Charles L.; Mcdermott, William A.; Lum, Ben T. F.

    1993-01-01

    Electrical actuator (ELA) power efficiency and requirements are examined for space system application. Requirements for Space Shuttle effector systems are presented, along with preliminary ELA trades and selection to form a preliminary ELA system baseline. Power and energy requirements for this baseline ELA system are applicable to the Space Shuttle and similar space vehicles.

  20. Direct Reading Instruction and the NYS ELA

    Science.gov (United States)

    Jones-Carey, Margaret H.

    2013-01-01

    This study analyzed the impact of classroom based reading instruction ("direct instruction") on the standardized test scores of 6th grade students as measured by the New York State English Language Arts assessment (NYS ELA). It was hypothesized that the implementation of direct instruction in reading in grade 6 would improve NYS ELA…

  1. Endovenous Laser Ablation and Concomitant Foam Sclerotherapy: Experience in 504 Patients

    International Nuclear Information System (INIS)

    Yilmaz, Saim; Ceken, Kagan; Alparslan, Ahmet; Durmaz, Sedat; Sindel, Timur

    2012-01-01

    Purpose: To investigate the value of endovenous laser ablation (ELA) and concomitant ultrasound-guided foam sclerotherapy (USGFS) in patients with chronic venous insufficiency. Methods: During a 6-year period, concomitant USGFS of the varicose veins were performed in 504 out of 610 patients who underwent ELA for truncal or perforating vein insufficiency. In these 504 patients (944 legs; bilateral in 440 patients), the incompetent veins were greater saphenous vein in 615 legs, small saphenous vein in 118 veins, perforating veins in 42 legs, and a combination of these in 169 legs. In all patients, after ELA of the incompetent veins, USGFS was performed for the remaining varicosities with 1–3% polidocanol foam. Patients were followed up clinically and with color Doppler ultrasound at 1, 6, and 12 months. Results: ELA was technically successful in all cases, although another venous puncture was necessary in 29 legs. Concomitant USGFS was also technically successful in all cases, but one to three additional sclerotherapy sessions were performed in 203 legs with persistent varicosities. During the follow-up, recanalization of the laser-ablated refluxing veins occurred in 16 legs (1.7%) and was treated with repeat ELA or USGFS. Major complications occurred in 1.4% of the treated legs and included skin necrosis and calf vein thrombosis. Conclusion: ELA and concomitant foam sclerotherapy is feasible and effective. The procedures are associated with a low complication rate and can be performed in both legs in the same session. Concomitant use of laser and foam may potentially decrease the recanalization rate of laser-ablated vessels.

  2. INACTIVITY OF RECOMBINANT ELA2B PROVIDES A NEW EXAMPLE OF EVOLUTIONARY ELASTASE SILENCING IN HUMANS

    OpenAIRE

    Szepessy, Edit; Sahin-Tóth, Miklós

    2005-01-01

    BACKGROUND. The archetypal mammalian elastase (ELA1) is not expressed in the human pancreas, because evolutionary mutations suppressed transcription of the ELA1 gene. AIMS. In this study we tested the theory that the unique duplication of the ELA2 gene in humans might compensate for the loss of ELA1. METHODS. Recombinant ELA2A and ELA2B were expressed in Escherichia coli, and their activity was tested on Glt-Ala-Ala-Pro-Leu-p-nitroanilide, DQ elastin and bovine milk protein. RESULTS. Surprisi...

  3. Slicing and Dicing the ELA Common Core Standards

    Science.gov (United States)

    Goatley, Virginia

    2012-01-01

    The English Language Arts Common Core State Standards (ELA CCSS) come at a time when many reading teachers, literacy coaches, and classroom teachers seek more extensive literacy practices than the policy mandates of No Child Left Behind and Reading First. These initiatives placed requirements for instruction in core aspects of reading at the…

  4. As seqüelas psicológicas da tortura

    Directory of Open Access Journals (Sweden)

    Alfredo Guillermo Martín

    Full Text Available Analisam-se, no texto, as seqüelas psicológicas da tortura, sendo esta compreendida como instituição do Estado e como experiência-limite em diferentes aspectos (as três etapas do processo traumatizante, principais seqüelas somáticas, retraumatização. Estuda-se o incremento das psicoses, a alta porcentagem de suicídios, as dificuldades de reinserção social, as seqüelas crônicas trans-geracionais e a taxa de mortalidade muito superior à normal. Desenvolve-se uma análise detalhada das questões ligadas à indenização das vítimas. Propõem-se instrumentos diagnósticos e terapêuticos apropriados, baseando-se numa crítica clínica do PTSD, numa ampla experiência pessoal e numa bibliografia internacional atualizada.

  5. Impact of Angioscopic Evaluation for Femoropopliteal In-Stent Restenosis Before and After Excimer Laser Atherectomy.

    Science.gov (United States)

    Idemoto, Akiko; Okamoto, Naotaka; Tanaka, Akihiro; Mori, Naoki; Nakamura, Daisuke; Yano, Masamichi; Makino, Nobuhiko; Egami, Yasuyuki; Shutta, Ryu; Tanouchi, Jun; Nishino, Masami

    2017-07-01

    In-stent restenosis (ISR) is a prevalent problem following stenting of femoropopliteal lesions. A potential novel treatment modality for ISR including excimer laser atherectomy (ELA) has become available. We performed ELA for in-stent chronic total occlusion (CTO) of femoropopliteal lesions and evaluated lesion morphology before and after ELA by angioscopy in 2 patients. The angioscopic findings clearly showed removal of in-stent thrombi after ELA. Thus, ELA may be effective for in-stent CTO of femoropopliteal lesions. This is the first report describing the direct visualization of ELA effect for vaporization of thrombi in femoropopliteal in-stent lesions by angioscopy.

  6. International laser safety standardization. From the European perspective with an emphasis on materials processing

    Energy Technology Data Exchange (ETDEWEB)

    Schulmeister, K [Div. of Life Sciences, Dept. of Radiation Protection, Oesterreichisches Forschungszentrum Seibersdorf, 2444 Seibersdorf (Austria)

    1997-08-01

    This report reviews international standards relevant to the safety of laser products and laser installations, with an emphasis on the safety of laser materials processing from the European perspective. In the first paragraphs an overview of the international standards organisations, their relative roles and ways of developing new standards is given. In the second part of the report, work currently underway in the respective standards committees is summarised and specific standards dealing with different aspects of laser safety are discussed. An appendix contains a list of standards organised in standards organisations (IEC, ISO and EN). (author)

  7. International laser safety standardization. From the European perspective with an emphasis on materials processing

    International Nuclear Information System (INIS)

    Schulmeister, K.

    1997-08-01

    This report reviews international standards relevant to the safety of laser products and laser installations, with an emphasis on the safety of laser materials processing from the European perspective. In the first paragraphs an overview of the international standards organisations, their relative roles and ways of developing new standards is given. In the second part of the report, work currently underway in the respective standards committees is summarised and specific standards dealing with different aspects of laser safety are discussed. An appendix contains a list of standards organised in standards organisations IEC, ISO and EN). (author)

  8. The effect of excimer laser pretreatment on diffusion and activation of boron implanted in silicon

    International Nuclear Information System (INIS)

    Monakhov, E.V.; Svensson, B.G.; Linnarsson, M.K.; La Magna, A.; Italia, M.; Privitera, V.; Fortunato, G.; Cuscuna, M.; Mariucci, L.

    2005-01-01

    We have investigated the effect of excimer laser annealing (ELA) on transient enhanced diffusion (TED) and activation of boron implanted in Si during subsequent rapid thermal annealing (RTA). It is observed that ELA with partial melting of the implanted region causes reduction of TED in the region that remains solid during ELA, where the diffusion length of boron is reduced by a factor of ∼4 as compared to the as-implanted sample. This is attributed to several mechanisms such as liquid-state annealing of a fraction of the implantation induced defects, introduction of excess vacancies during ELA, and solid-state annealing of the defects beyond the maximum melting depth by the heat wave propagating into the Si wafer. The ELA pretreatment provides a substantially improved electrical activation of boron during subsequent RTA

  9. Dopant redistribution and electrical activation in silicon following ultra-low energy boron implantation and excimer laser annealing

    International Nuclear Information System (INIS)

    Whelan, S.; La Magna, A.; Privitera, V.; Mannino, G.; Italia, M.; Bongiorno, C.; Fortunato, G.; Mariucci, L.

    2003-01-01

    Excimer laser annealing (ELA) of ultra-low-energy (ULE) B-ion implanted Si has been performed. High-resolution transmission electron microscopy has been used to assess the as-implanted damage and the crystal recovery following ELA. The electrical activation and redistribution of B in Si during ELA has been investigated as a function of the laser energy density (melted depth), the implant dose, and the number of laser pulses (melt time). The activated and retained dose has been evaluated with spreading resistance profiling and secondary ion mass spectrometry. A significant amount of the implanted dopant was lost from the sample during ELA. However, the dopant that was retained in crystal material was fully activated following rapid resolidification. At an atomic concentration below the thermodynamic limit, the activation efficiency (dose activated/dose implanted into Si material) was a constant for a fixed melt depth, irrespective of the dose implanted and hence the total activated dose was raised as the implant dose was increased. The electrical activation was increased for high laser energy density annealing when the dopant was redistributed over a deeper range

  10. Ela2 mutations and clinical manifestations in familial congenital neutropenia.

    Science.gov (United States)

    Shiohara, Masaaki; Shigemura, Tomonari; Saito, Shoji; Tanaka, Miyuki; Yanagisawa, Ryu; Sakashita, Kazuo; Asada, Hiroshi; Ishii, Eizaburo; Koike, Kazutoshi; Chin, Motoaki; Kobayashi, Masao; Koike, Kenichi

    2009-05-01

    Three familial cases of each of severe congenital neutropenia (SCN) and cyclic neutropenia (CN) in addition to 3 sporadic cases of SCN were analyzed for neutrophil elastase (Ela2) gene mutation. The contents of the neutrophil-specific granule proteins cathelicidin antimicrobial peptide and neutrophil gelatinase-associated lipocalin were also analyzed in SCN. Genomic DNA was extracted from the patients' peripheral blood or bone marrow, and the coding sequence of the Ela2 gene was amplified by polymerase chain reaction and subjected to direct sequencing. The contents of antimicrobial peptides were analyzed by flow cytometry. Three cases of familial SCN (P13L, R52P, and S97L), 2 of familial CN (W212stop and P110L), and 1 of sporadic SCN (V72M) were shown to have heterozygous mutations in the Ela2 gene. W212stop found in a familial CN case was a novel mutation of Ela2. Prophylactic treatment for growth factors or antibiotic prophylaxis against bacterial infection was useful for lowering the frequency of infectious episodes. Adult patients tended to have less frequent infections compared with minors in the same family. The contents of both cathelicidin antimicrobial peptide and neutrophil gelatinase-associated lipocalin were significantly reduced in SCN compared with healthy controls. Prophylaxis by growth factor or antibiotics is useful for decreasing risks of bacterial infections in SCN and CN. Adults were likely to have less frequent infections than children in familial cases of SCN and CN with the same mutation of Ela2.

  11. Response of ELA-A1 horses immunized with lipopeptide containing an equine infectious anemia virus ELA-A1-restricted CTL epitope to virus challenge.

    Science.gov (United States)

    Ridgely, Sherritta L; Zhang, Baoshan; McGuire, Travis C

    2003-01-17

    Lipopeptide containing an ELA-A1-restricted cytotoxic T lymphocyte (CTL) epitope from the envelope surface unit (SU) protein of the EIAV(WSU5) strain was used to immunize three horses having the ELA-A1 haplotype. Peptide-specific ELA-A1-restricted CTL were induced in all three horses, although these were present transiently in PBMC. These horses were further immunized with lipopeptide containing the corresponding CTL epitope from the EIAV(PV) strain. Then, the three immunized horses and three non-immunized horses were challenged by intravenous inoculation with 300 TCID(50) EIAV(PV). All horses developed cell free viremia, fever and thrombocytopenia. However, there was a statistically lower fever and thrombocytopenia severity score in the immunized group. Shorter duration of plasma viral load in two of the three immunized horses likely explains the less severe clinical disease in this group. Results indicate that lipopeptide immunization had a protective effect against development of clinical disease following virus challenge.

  12. Using Thinking Skills as a Bridge between ELA and Science Teaching Strategies

    Science.gov (United States)

    Harris, Robin Lee

    2008-01-01

    This article presents five activities that demonstrate developing thinking skills in students, uses comparable ELA and science skills. The thinking skills of Blooms Taxonomy are the organizer. Skills and processes gleaned from NYS ELA and Science Standards included in the article are: categorizing, comparing, following procedures, sequencing,…

  13. The European X-ray Free Electron Laser Project at DESY

    CERN Document Server

    Schwarz, Andreas

    2004-01-01

    On February 5, 2003, the German Federal Ministry of Education and Research decided that the X-ray free-electron laser XFEL, proposed by the International TESLA Collaboration, should be realized as a European project and located at DESY/Hamburg. The ministry also announced that in view of the locational advantage, Germany is prepared to cover half of the investment and personnel costs for the XFEL. In the course of the last year work has concentrated on the following areas: setting up of an organizational structure at DESY for the preparation of the project, discussions with potential European partners on several levels, selection of a new site for the XFEL facility and the preparation of the 'plan approval procedure'. The present status of the technical layout of the Linear Accelerator, the SASE Undulator and Photon Beamlines and the experiment stations will be presented.

  14. Development of an ELA-DRA gene typing method based on pyrosequencing technology.

    Science.gov (United States)

    Díaz, S; Echeverría, M G; It, V; Posik, D M; Rogberg-Muñoz, A; Pena, N L; Peral-García, P; Vega-Pla, J L; Giovambattista, G

    2008-11-01

    The polymorphism of equine lymphocyte antigen (ELA) class II DRA gene had been detected by polymerase chain reaction-single-strand conformational polymorphism (PCR-SSCP) and reference strand-mediated conformation analysis. These methodologies allowed to identify 11 ELA-DRA exon 2 sequences, three of which are widely distributed among domestic horse breeds. Herein, we describe the development of a pyrosequencing-based method applicable to ELA-DRA typing, by screening samples from eight different horse breeds previously typed by PCR-SSCP. This sequence-based method would be useful in high-throughput genotyping of major histocompatibility complex genes in horses and other animal species, making this system interesting as a rapid screening method for animal genotyping of immune-related genes.

  15. A conserved segmental duplication within ELA.

    Science.gov (United States)

    Brinkmeyer-Langford, C L; Murphy, W J; Childers, C P; Skow, L C

    2010-12-01

    The assembled genomic sequence of the horse major histocompatibility complex (MHC) (equine lymphocyte antigen, ELA) is very similar to the homologous human HLA, with the notable exception of a large segmental duplication at the boundary of ELA class I and class III that is absent in HLA. The segmental duplication consists of a ∼ 710 kb region of at least 11 repeated blocks: 10 blocks each contain an MHC class I-like sequence and the helicase domain portion of a BAT1-like sequence, and the remaining unit contains the full-length BAT1 gene. Similar genomic features were found in other Perissodactyls, indicating an ancient origin, which is consistent with phylogenetic analyses. Reverse-transcriptase PCR (RT-PCR) of mRNA from peripheral white blood cells of healthy and chronically or acutely infected horses detected transcription from predicted open reading frames in several of the duplicated blocks. This duplication is not present in the sequenced MHCs of most other mammals, although a similar feature at the same relative position is present in the feline MHC (FLA). Striking sequence conservation throughout Perissodactyl evolution is consistent with a functional role for at least some of the genes included within this segmental duplication. © 2010 The Authors, Journal compilation © 2010 Stichting International Foundation for Animal Genetics.

  16. The red deer Cervus elaphus genome CerEla1.0: sequencing, annotating, genes, and chromosomes.

    Science.gov (United States)

    Bana, Nóra Á; Nyiri, Anna; Nagy, János; Frank, Krisztián; Nagy, Tibor; Stéger, Viktor; Schiller, Mátyás; Lakatos, Péter; Sugár, László; Horn, Péter; Barta, Endre; Orosz, László

    2018-01-02

    We present here the de novo genome assembly CerEla1.0 for the red deer, Cervus elaphus, an emblematic member of the natural megafauna of the Northern Hemisphere. Humans spread the species in the South. Today, the red deer is also a farm-bred animal and is becoming a model animal in biomedical and population studies. Stag DNA was sequenced at 74× coverage by Illumina technology. The ALLPATHS-LG assembly of the reads resulted in 34.7 × 10 3 scaffolds, 26.1 × 10 3 of which were utilized in Cer.Ela1.0. The assembly spans 3.4 Gbp. For building the red deer pseudochromosomes, a pre-established genetic map was used for main anchor points. A nearly complete co-linearity was found between the mapmarker sequences of the deer genetic map and the order and orientation of the orthologous sequences in the syntenic bovine regions. Syntenies were also conserved at the in-scaffold level. The cM distances corresponded to 1.34 Mbp uniformly along the deer genome. Chromosomal rearrangements between deer and cattle were demonstrated. 2.8 × 10 6 SNPs, 365 × 10 3 indels and 19368 protein-coding genes were identified in CerEla1.0, along with positions for centromerons. CerEla1.0 demonstrates the utilization of dual references, i.e., when a target genome (here C. elaphus) already has a pre-established genetic map, and is combined with the well-established whole genome sequence of a closely related species (here Bos taurus). Genome-wide association studies (GWAS) that CerEla1.0 (NCBI, MKHE00000000) could serve for are discussed.

  17. Effect of excimer laser annealing on a-InGaZnO thin-film transistors passivated by solution-processed hybrid passivation layers

    Science.gov (United States)

    Bermundo, Juan Paolo; Ishikawa, Yasuaki; Fujii, Mami N.; Nonaka, Toshiaki; Ishihara, Ryoichi; Ikenoue, Hiroshi; Uraoka, Yukiharu

    2016-01-01

    We demonstrate the use of excimer laser annealing (ELA) as a low temperature annealing alternative to anneal amorphous InGaZnO (a-IGZO) thin-film transistors (TFTs) passivated by a solution-processed hybrid passivation layer. Usually, a-IGZO is annealed using thermal annealing at high temperatures of up to 400 °C. As an alternative to high temperature thermal annealing, two types of ELA, XeCl (308 nm) and KrF (248 nm) ELA, are introduced. Both ELA types enhanced the electrical characteristics of a-IGZO TFTs leading to a mobility improvement of ~13 cm2 V-1 s-1 and small threshold voltage which varied from ~0-3 V. Furthermore, two-dimensional heat simulation using COMSOL Multiphysics was used to identify possible degradation sites, analyse laser heat localization, and confirm that the substrate temperature is below 50 °C. The two-dimensional heat simulation showed that the substrate temperature remained at very low temperatures, less than 30 °C, during ELA. This implies that any flexible material can be used as the substrate. These results demonstrate the large potential of ELA as a low temperature annealing alternative for already-passivated a-IGZO TFTs.

  18. Randomized controlled study of excimer laser atherectomy for treatment of femoropopliteal in-stent restenosis: initial results from the EXCITE ISR trial (EXCImer Laser Randomized Controlled Study for Treatment of FemoropopliTEal In-Stent Restenosis).

    Science.gov (United States)

    Dippel, Eric J; Makam, Prakash; Kovach, Richard; George, Jon C; Patlola, Raghotham; Metzger, D Christopher; Mena-Hurtado, Carlos; Beasley, Robert; Soukas, Peter; Colon-Hernandez, Pedro J; Stark, Matthew A; Walker, Craig

    2015-01-01

    The purpose of this study was to evaluate the safety and efficacy of excimer laser atherectomy (ELA) with adjunctive percutaneous transluminal angioplasty (PTA) versus PTA alone for treating patients with chronic peripheral artery disease with femoropopliteal bare nitinol in-stent restenosis (ISR). Femoropopliteal stenting has shown superiority to PTA for lifestyle-limiting claudication and critical limb ischemia, although treating post-stenting artery reobstruction, or ISR, remains challenging. The multicenter, prospective, randomized, controlled EXCITE ISR (EXCImer Laser Randomized Controlled Study for Treatment of FemoropopliTEal In-Stent Restenosis) trial was conducted across 40 U.S. centers. Patients with Rutherford Class 1 to 4 and lesions of target lesion length ≥4 cm, vessel diameter 5 to 7 mm were enrolled and randomly divided into ELA + PTA and PTA groups by a 2:1 ratio. The primary efficacy endpoint was target lesion revascularization (TLR) at 6-month follow up. The primary safety endpoint was major adverse event (death, amputation, or TLR) at 30 days post-procedure. Study enrollment was stopped at 250 patients due to early efficacy demonstrated at a prospectively-specified interim analysis. A total of 169 ELA + PTA subjects (62.7% male; mean age 68.5 ± 9.8 years) and 81 PTA patients (61.7% male; mean age 67.8 ± 10.3 years) were enrolled. Mean lesion length was 19.6 ± 12.0 cm versus 19.3 ± 11.9 cm, and 30.5% versus 36.8% of patients exhibited total occlusion. ELA + PTA subjects demonstrated superior procedural success (93.5% vs. 82.7%; p = 0.01) with significantly fewer procedural complications. ELA + PTA and PTA subject 6-month freedom from TLR was 73.5% versus 51.8% (p < 0.005), and 30-day major adverse event rates were 5.8% versus 20.5% (p < 0.001), respectively. ELA + PTA was associated with a 52% reduction in TLR (hazard ratio: 0.48; 95% confidence interval: 0.31 to 0.74). The EXCITE ISR trial is the first large, prospective, randomized study

  19. Boron-enhanced diffusion in excimer laser annealed Si

    International Nuclear Information System (INIS)

    Monakhov, E.V.; Svensson, B.G.; Linnarsson, M.K.; La Magna, A.; Privitera, V.; Fortunato, G.; Mariucci, L.

    2004-01-01

    The effect of excimer laser annealing (ELA) and rapid thermal annealing (RTA) on B redistribution in B-implanted Si has been studied by secondary ion mass spectrometry (SIMS) and spreading resistance probe (SRP). B has been implanted with an energy of 1 keV and a dose of 10 16 cm -2 forming a distribution with a width of 20-30 nm and a peak concentration of ∼5 x 10 21 cm -3 . It has been found that ELA with 10 pulses of the energy density of 850 mJ/cm 2 results in a uniform B distribution over the ELA-molten region with an abrupt profile edge. SRP measurements demonstrate good activation of the implanted B after ELA, with the concentration of the activated fraction (∼10 21 cm -3 ) exceeding the solid solubility level. RTA (30 s at 1100 deg. C) of the as-implanted and ELA-treated samples leads to a diffusion of B with diffusivities exceeding the equilibrium one and the enhancement is similar for both of the samples. It is also found that RTA decreases the activated B in the ELA-treated sample to the solid solubility limit (2 x 10 20 cm -3 ). The similarity of the B diffusivity for the as-implanted and ELA-treated samples suggests that the enhancement of the B diffusivity is due to the so-called boron-enhanced diffusion (BED). Possible mechanisms of BED are discussed

  20. Applying low-energy multipulse excimer laser annealing to improve charge retention of Au nanocrystals embedded MOS capacitors

    International Nuclear Information System (INIS)

    Shen, Kuan-Yuan; Chen, Hung-Ming; Liao, Ting-Wei; Kuan, Chieh-Hsiung

    2015-01-01

    The low-energy multipulse excimer laser annealing (LEM-ELA) is proposed to anneal the nanostructure of nanocrystal (NC) embedded in a SiO 2 thin film without causing atomic diffusion and damaging the NCs, since the LEM-ELA combining the advantages of laser annealing and UV curing features rapid heating and increasing oxide network connectivity. A Fourier transform infrared spectroscopy (FTIR) characterization of SiO 2 thin films annealed using LEM-ELA indicated that the quality was improved through the removal of water-related impurities and the reconstruction of the network Si–O–Si bonds. Then, LEM-ELA was applied to a SiO 2 thin film embedded with Au NCs, which were fabricated as MOS capacitors. The charge retention was greatly improved and the percentage of retained charges was about 10% after 3  ×  10 8  s. To investigate and differentiate the effects of LEM-ELA on charges stored in both oxide traps and in the Au NCs, a double-mechanism charge relaxation analysis was performed. The results indicated that the oxide traps were removed and the confinement ability of Au NCs was enhanced. The separated memory windows contributed from the charges in Au NCs and those in oxide traps were obtained and further confirmed that the LEM-ELA removed oxide traps without damaging the Au NCs. (paper)

  1. Synchronization and sequencing of data acquisition and control electronics at the European X-ray free electron laser

    International Nuclear Information System (INIS)

    Gessler, Patrick

    2015-11-01

    The 3.5 km long European X-Ray Free Electron Laser, currently under construction in northern Germany, will deliver bursts of up to 2700 short X-ray pulses every 100 ms, providing wavelengths between 0.05 and 6 nm, and a repetition rate of 4.5 MHz to several experiment stations. It allows in-depth research in various scientific fields. In order to set-up the beam, position samples and capture the measured variables, information from the accelerator, diagnostic devices and detectors have to be digitized, converted, processed, transferred, concentrated, distributed, reorganized, controlled and saved. All these steps have to be accurately synchronized and sequenced relative to the actual electron bunch or photon pulse in order to guarantee correct data acquisition timings and unique identification of each bunch passing the beamlines. This document provides a complete description of the planning, design, realization and evaluation of the European XFEL Timing System, which implements the synchronization and sequencing of the data acquisition and control electronics for the European X-Ray Free-Electron Laser Facility.

  2. Effect of excimer laser annealing on a-InGaZnO thin-film transistors passivated by solution-processed hybrid passivation layers

    International Nuclear Information System (INIS)

    Bermundo, Juan Paolo; Ishikawa, Yasuaki; Fujii, Mami N; Uraoka, Yukiharu; Nonaka, Toshiaki; Ishihara, Ryoichi; Ikenoue, Hiroshi

    2016-01-01

    We demonstrate the use of excimer laser annealing (ELA) as a low temperature annealing alternative to anneal amorphous InGaZnO (a-IGZO) thin-film transistors (TFTs) passivated by a solution-processed hybrid passivation layer. Usually, a-IGZO is annealed using thermal annealing at high temperatures of up to 400 °C. As an alternative to high temperature thermal annealing, two types of ELA, XeCl (308 nm) and KrF (248 nm) ELA, are introduced. Both ELA types enhanced the electrical characteristics of a-IGZO TFTs leading to a mobility improvement of ∼13 cm 2 V −1 s −1 and small threshold voltage which varied from ∼0–3 V. Furthermore, two-dimensional heat simulation using COMSOL Multiphysics was used to identify possible degradation sites, analyse laser heat localization, and confirm that the substrate temperature is below 50 °C. The two-dimensional heat simulation showed that the substrate temperature remained at very low temperatures, less than 30 °C, during ELA. This implies that any flexible material can be used as the substrate. These results demonstrate the large potential of ELA as a low temperature annealing alternative for already-passivated a-IGZO TFTs. (paper)

  3. A comparison of buffered lidocaine versus ELA-Max before peripheral intravenous catheter insertions in children.

    Science.gov (United States)

    Luhmann, Janet; Hurt, Sarah; Shootman, Mario; Kennedy, Robert

    2004-03-01

    Peripheral intravenous catheter (PIV) insertion is a common, painful experience for many children in the pediatric emergency department. Although local anesthetics such as injected buffered lidocaine have been shown to be effective at reducing pain and anxiety associated with PIV insertion, they are not routinely used. ELA-Max, a topical local anesthetic, has the advantage of needle-free administration but has not been compared with buffered lidocaine for PIV insertion. To compare the reduction of pain and anxiety during PIV insertion provided by subcutaneous buffered 1% lidocaine or topical ELA-Max in children. A randomized trial in children 4 to 17 years old undergoing PIV insertion with 22-gauge catheters was conducted. Children received either buffered lidocaine or ELA-Max. Buffered lidocaine was administered by using 30-gauge needles to inject 0.1 to 0.2 mL subcutaneously just before PIV insertion. ELA-Max was applied to the skin and occluded with Tegaderm 30 minutes before PIV insertion. Self-reported Visual Analog Scale (VAS) questionnaires (rating on a scale of 1-10; 1 = no pain, anxiety) were completed by patients and their parents before PIV insertion to assess baseline perceptions about pain and anxiety associated with PIV insertion and immediately after PIV insertion to assess pain and anxiety associated with the experience. After PIV insertion, the nurse who inserted the PIV also completed a VAS questionnaire assessing technical difficulty and satisfaction with the local anesthesia. A blinded observer also completed a VAS questionnaire to assess pain and anxiety associated with the PIV insertion. Data were analyzed by using chi2 and t tests. Sixty-nine subjects were enrolled, and questionnaires were competed by all (mean age: 12.1 +/- 4.5 years; 61% female). There were no differences for buffered lidocaine and ELA-Max groups in age, gender, race, prior IV experience, or baseline pain and anxiety. There were no significant differences between buffered

  4. Investigation of a free electron laser oscillator in the X-ray wavelength regime for the European XFEL; Untersuchungen zu einem Freie-Elektronen-Laser-Oszillator im Roentgen-Wellenlaengenbereich fuer den European XFEL

    Energy Technology Data Exchange (ETDEWEB)

    Zemella, Johann Christian Uwe

    2013-09-15

    In this thesis an X-ray free electron laser oscillator for the European XFEL is described. Such an oscillator consists of at least two Bragg deflecting crystals, in this content two or four Diamond crystals, focussing mirrors and an undulator. The advantage of Diamond is caused by the high reflectivity and the high thermal conductivity, which is necessary for dissipate the absorbed energy out of the center of the crystal. In context of this thesis the principle layout of an XFELO for the European XFEL and the FEL process is presented. Effects on the FEL process due to the disturbances of the electron beam or the XFELO cavity are discussed. As second aspect the thermal evolution in the crystal under absorbed XFELO-pulses is investigated. An experiment for the investigation of the thermal evolution of crystals under simulated XFELO conditions is presented.

  5. Optical and electronic properties of HWCVD and PECVD silicon films irradiated using excimer and Nd:Yag lasers

    International Nuclear Information System (INIS)

    Shaikh, M.Z.; O'Neill, K.A.; Anthony, S.; Persheyev, S.K.; Rose, M.J.

    2006-01-01

    Thin silicon film samples were deposited using HWCVD and PECVD techniques to study the influence of laser annealing on their optical and electronic properties. Samples were annealed in air using a XeCl excimer and Nd:Yag lasers. Excimer laser annealing (ELA) at 50 to 222 mJ/cm 2 increased conductivity in PECVD films by 2 to 3 orders of magnitude and in HWCVD films by 1 to 2 orders of magnitude. ELA was also seen to decrease the optical gap in PECVD films by 0.5 eV and HWCVD films by 0.15 eV. Silicon-oxygen bond content was higher in as-deposited HWCVD films than PECVD films. Hydrogen content (at.%) in PECVD films was higher than HWCVD for higher H dilution ratios. A Nd:Yag laser 3-beam interference pattern was used to produce a periodic array of crystals in both PECVD and HWCVD films

  6. Using KrF ELA to Improve Gate-Stacked LaAlO₃/ZrO₂ Indium Gallium Zinc Oxide Thin-Film Transistors with Novel Atmospheric Pressure Plasma-Enhanced Chemical Vapor Deposition Technique.

    Science.gov (United States)

    Wu, Chien-Hung; Chang, Kow-Ming; Chen, Yi-Ming; Huang, Bo-Wen; Zhang, Yu-Xin; Wang, Shui-Jinn

    2018-03-01

    Atmospheric pressure plasma-enhanced chemical vapor deposition (AP-PECVD) technique and KrF excimer laser annealing (ELA) were employed for the fabrication of indium gallium zinc oxide thin-film transistors (IGZO-TFTs). Device with a 150 mJ/cm2 laser annealing densities demonstrated excellent electrical characteristics with improved on/off current ratio of 4.7×107, high channel mobility of 10 cm2/V-s, and low subthreshold swing of 0.15 V/dec. The improvements are attributed to the adjustment of oxygen vacancies in the IGZO channel to an appropriate range of around 28.3% and the reduction of traps at the high-k/IGZO interface.

  7. Implementation of Endovenous Laser Ablation for Varicose Veins in a Large Community Hospital : The First 400 Procedures

    NARCIS (Netherlands)

    van den Bremer, J.; Joosten, P. Ph. A. Hedeman; Hamming, J. F.; Moll, F. L.

    Endovenous Laser ablation (ELA) has become a standard treatment of the incompetent great saphenous vein (GSV). Our prospective audit examines the implementation of this new method in a large community hospital with special attention to obstacles, technical results, pain scores, failures and our

  8. Ela ja sära - setu pitsist ekvaatorireisini / Andres Keil

    Index Scriptorium Estoniae

    Keil, Andres, 1974-

    2004-01-01

    Eesti Kultuurkapitali "Ela ja sära" stipendiumi laureaadid kirjanik Eeva Park, kunstnik Kai Kaljo, sporditeadlane Joe Noormets, näitleja Kersti Kreismann, pitsikunstnik Ulve Kangro, režissöör Marko Raat, disainer Tarmo Luisk ja helilooja Urmas Sisask oma loomingulistest plaanidest

  9. 2D Modeling of Flood Propagation due to the Failure of Way Ela Natural Dam

    Directory of Open Access Journals (Sweden)

    Yakti Bagus Pramono

    2018-01-01

    Full Text Available A dam break induced-flood propagation modeling is needed to reduce the losses of any potential dam failure. On the 25 July 2013, there was a dam break generated flood due to the failure of Way Ela Natural Dam that severely damaged houses and various public facilities. This study simulated the flooding induced by the failure of Way Ela Natural Dam. A two-dimensional (2D numerical model, HEC-RAS v.5, is used to simulate the overland flow. The dam failure itself is simulated using HECHMSv.4. The results of this study, the flood inundation, flood depth, and flood arrival time are verified by using available secondary data. These informations are very important to propose mitigation plans with respect to possible dam break in the future.

  10. Strategic avionics technology definition studies. Subtask 3-1A3: Electrical Actuation (ELA) Systems Test Facility

    Science.gov (United States)

    Rogers, J. P.; Cureton, K. L.; Olsen, J. R.

    1994-01-01

    Future aerospace vehicles will require use of the Electrical Actuator systems for flight control elements. This report presents a proposed ELA Test Facility for dynamic evaluation of high power linear Electrical Actuators with primary emphasis on Thrust Vector Control actuators. Details of the mechanical design, power and control systems, and data acquisition capability of the test facility are presented. A test procedure for evaluating the performance of the ELA Test Facility is also included.

  11. A randomized, double-blind comparison study of EMLA and ELA-Max for topical anesthesia in children undergoing intravenous insertion.

    Science.gov (United States)

    Koh, Jeffrey L; Harrison, Dale; Myers, Robert; Dembinski, Robert; Turner, Helen; McGraw, Terrence

    2004-12-01

    Topical anesthetics may help reduce discomfort associated with procedures involving needle-puncture, such as intravenous (i.v.) insertions, in children. EMLA cream has become a common, noninvasive therapy for topical anesthesia in children. ELA-Max is a recently introduced topical anesthetic cream marketed as being as effective in producing topical anesthesia after a 30-min application as EMLA is after a 60-min application. The purpose of this research was to compare ELA-Max at 30 min with EMLA at 60 min for providing topical anesthesia for i.v. insertions in children. Sixty children, ages 8-17 years, requiring an i.v. were randomized to receive either the 30 min application of ELA-Max (n = 30) or the 60 min application of EMLA (n = 30). Children rated any pain associated with the i.v. insertion using a 100-mm Visual Analog Scale (VAS). The anesthesiologist assessed the presence of blanching at the site and rated the difficulty of placing the i.v. There was no clinically or statistically significant difference in pain ratings (P = 0.87) between the ELA-Max (mean = 25.7) and the EMLA (mean = 26.8) groups. ELA-Max caused significantly (P = 0.04) less blanching than EMLA, however there was no difference in the anesthesiologists' rating of the difficulty of the i.v. placement between the groups (P = 0.73). Results from this study support the claim that a 30-min application of ELA-Max (with occlusion) is as effective as a 60-min application of EMLA (with occlusion) for producing topical anesthesia for i.v. insertion in children.

  12. The Earth Resources Laboratory Applications Software (ELAS) in university research and education: An operator oriented geobased information system

    Science.gov (United States)

    Coker, B. L.; Kind, T. C.; Smith, W. F., Jr.; Weber, N. V.

    1981-01-01

    Created for analyzing and processing digital data such as that collected by multispectral scanners or digitized from maps, ELAS is designed for ease of user operation and includes its own FORTRAN operating monitor and an expandable set of application modules which are FORTRAN overlays. On those machines that do not support FORTRAN overlaying, the modules exist as subprograms. The subsystem can be implemented on most 16-bit or 32-bit machines and is capable of, but not limited to, operating on low-cost minicomputer systems. The recommended hardware configuration for ELAS and a representative listing of some operating and application modules are presented.

  13. Strengthen Your Music Program by Incorporating Aspects of the ELA Common Core State Standards

    Science.gov (United States)

    Smith, Nancy Thompson

    2014-01-01

    Implementation of the English Language Arts (ELA) Common Core State Standards (CCSS) reduces the traditional separation between the study of different subjects. Increased focus on nonfiction reading and writing means more incorporation of other content, such as music, into language arts classes. CCSS's emphasis on speaking and writing across…

  14. The RF-Station Interlock for the European X-ray laser

    CERN Document Server

    Grevsmühl, T; Duval, P; Hensler, O; Kahl, J; Kaiser, F R; Kretzschmann, A; Rehlich, K; Schwendicke, U; Simrock, S; Weisse, S

    2004-01-01

    The RF-station interlock for the European X-ray laser will be based on a 19"- 3U crate incorporating a controller with the 32-bit RISC NIOS-processor (ALTERA). The main task of the interlock system is to prevent any damage from the components of the RF station and connected cavities. The interlock system must also guarantee a maximum time of operation of the RF stations which implies the implementation of self diagnostics and repair strategies on a module basis. Additional tasks are: collection and temporary storage of status information of the individual channels of the interlock system, transfer of this information to the control system, slow control functions (e.g. HV setting and monitoring) and control of inputs and outputs from and to other subsystems. In this paper we present the implementation using an ALTERA-FPGA running a 32-bit RISC NIOS-processor. Connection to the accelerator main control is provided by Ethernet using BSD-style socket routines based on ALTERA's plugs-library. The layout o...

  15. Study on the efficacy of ELA-Max (4% liposomal lidocaine) compared with EMLA cream (eutectic mixture of local anesthetics) using thermosensory threshold analysis in adult volunteers.

    Science.gov (United States)

    Tang, M B Y; Goon, A T J; Goh, C L

    2004-04-01

    ELA-Max and EMLA cream are topical anesthetics that have been shown to have similar anesthetic efficacy in previous studies. To evaluate the analgesic efficacy of ELA-Max in comparison with EMLA cream using a novel method of thermosensory threshold analysis. A thermosensory analyzer was used to assess warmth- and heat-induced pain thresholds. No statistically significant difference was found in pain thresholds using either formulation. However, EMLA cream increased the heat-induced pain threshold to a greater extent than ELA-Max. Thermosensory measurement and analysis was well tolerated and no adverse events were encountered. EMLA cream may be superior to ELA-Max for heat-induced pain. This study suggests that thermosensory measurement may be another suitable tool for future topical anesthetic efficacy studies.

  16. Improved AMOLED with aligned poly-Si thin-film transistors by laser annealing and chemical solution treatments

    International Nuclear Information System (INIS)

    Wu, G.M.; Chen, C.N.; Feng, W.S.; Lu, H.C.

    2009-01-01

    Low-temperature polycrystalline silicon (LTPS) thin-film transistors (TFT) were prepared for the active-matrix organic light-emitting displays (AMOLED). The excimer laser annealing (ELA) recrystallization technique was employed with a chemical solution treatment process to improve the TFT characteristic uniformity and the AMOLED display image quality. The characteristics of the poly-Si array thin films were influenced by XeCl ELA optic module design, TFT device channel direction, and laser irradiation overlap ratio. The ELA system module provided aligned poly-Si grain size of 0.3 μm by the homogenization lens design. The chemical solution treatment process included a dilute HF solution (DHF), ozone (O 3 ) water, and buffer oxide etching solution (BOE). The PMOS TFT showed better field effect mobility of 87.6 cm 2 /V s, and the threshold voltage was -1.35 V. The off current (I off ) was 1.25x10 -11 A, and the on/off current ratio was 6.27x10 6 . In addition, the image quality of the AMOLED display was highly improved using the 2T1C structure design without any compensation circuit.

  17. "Ela ja sära" ja teised uued stipendiumid / Ainiki Väljataga

    Index Scriptorium Estoniae

    Väljataga, Ainiki, 1966-

    2000-01-01

    Eesti Kultuurkapitali nõukogu 5. mai koosolekul algatatud kolmest stipendiumiprogrammist. Stipendiumide ststuudid: stipendium viibimiseks loomemajas välismaal, stipendium külaliskriitiku kutsumiseks, loominguline stipendium "Ela ja sära". Kommenteerib Mart Kalm. Taotlemise tähtaeg 5. VI.

  18. Relationship between ELA2 gene mutations, clinical and laboratory parameters in severe congenital and cyclic neutropenia

    Directory of Open Access Journals (Sweden)

    Farhoodi A

    2007-09-01

    Full Text Available   Background: Mutations of ELA2, the gene encoding neutrophil elastase (NE are known to be associated with cyclic neutropenia (CN and severe congenital neutropenia (SCN. However, high variability of these mutations has been reported. This study was designed to describe the analysis of the ELA2 gene, clinical manifestations and demographic characteristics in patients with CN and SCN.Methods: A series of 21 patients with CN or SCN were selected, based on SCINR criteria, from the immunology ward of the Pediatric Medicine Center, Tehran, Iran, from March 2004 to August 2005. The ELA2 gene, isolated from blood samples, was analyzed using RT-PCR and automated capillary sequencing. Informed consent was obtained under the tenets of the Helsinki Declaration and the Ethical Committee of the Tehran University of Medical Sciences.Results: Kostmann's syndrome and CN was diagnosed in three and 18 patients respectively. Of all the patients, one or two mutations were found in 18 cases (85.7%, including all three patients with SCN and 15 of the patients with CN. Exons two and four had the most mutations (eight and seven cases, respectively. Seven patients had double mutations in two distinct exons. Overall, 16 different mutations were found. At the time of presentation, the mean age of patients was 13.4 ±17.6 months, ranging from one month to seven years. Overall, 61.9% of patients had consanguineous parents. The mean absolute neutrophil count was 830.5 ±419.4 (150-2000/mm3. On average, each patient had been admitted to the hospital 2.2 ±1.6 times. The neutrophil counts of the SCN patients were significantly higher than those of the CN patients. However, there was no significant difference in the neutrophil counts between patients with mutations and those without mutations. All patients with SCN had two or more infectious complications, although the prevalence of infectious or non-infectious complications did not correlate with ELA2 mutations or the

  19. Investigation of a free electron laser oscillator in the X-ray wavelength regime for the European XFEL

    International Nuclear Information System (INIS)

    Zemella, Johann Christian Uwe

    2013-09-01

    In this thesis an X-ray free electron laser oscillator for the European XFEL is described. Such an oscillator consists of at least two Bragg deflecting crystals, in this content two or four Diamond crystals, focussing mirrors and an undulator. The advantage of Diamond is caused by the high reflectivity and the high thermal conductivity, which is necessary for dissipate the absorbed energy out of the center of the crystal. In context of this thesis the principle layout of an XFELO for the European XFEL and the FEL process is presented. Effects on the FEL process due to the disturbances of the electron beam or the XFELO cavity are discussed. As second aspect the thermal evolution in the crystal under absorbed XFELO-pulses is investigated. An experiment for the investigation of the thermal evolution of crystals under simulated XFELO conditions is presented.

  20. Analyzing Sustainable Energy Opportunities for a Small Scale Off-Grid Facility: A Case Study at Experimental Lakes Area (ELA), Ontario

    Science.gov (United States)

    Duggirala, Bhanu

    This thesis explored the opportunities to reduce energy demand and renewable energy feasibility at an off-grid science "community" called the Experimental Lakes Area (ELA) in Ontario. Being off-grid, ELA is completely dependent on diesel and propane fuel supply for all its electrical and heating needs, which makes ELA vulnerable to fluctuating fuel prices. As a result ELA emits a large amount of greenhouse gases (GHG) for its size. Energy efficiency and renewable energy technologies can reduce energy consumption and consequently energy cost, as well as GHG. Energy efficiency was very important to ELA due to the elevated fuel costs at this remote location. Minor upgrades to lighting, equipment and building envelope were able to reduce energy costs and reduce load. Efficient energy saving measures were recommended that save on operating and maintenance costs, namely, changing to LED lights, replacing old equipment like refrigerators and downsizing of ice makers. This resulted in a 4.8% load reduction and subsequently reduced the initial capital cost for biomass by 27,000, by 49,500 for wind power and by 136,500 for solar power. Many alternative energies show promise as potential energy sources to reduce the diesel and propane consumption at ELA including wind energy, solar heating and biomass. A biomass based CHP system using the existing diesel generators as back-up has the shortest pay back period of the technologies modeled. The biomass based CHP system has a pay back period of 4.1 years at 0.80 per liter of diesel, as diesel price approaches $2.00 per liter the pay back period reduces to 0.9 years, 50% the generation cost compared to present generation costs. Biomass has been successfully tried and tested in many off-grid communities particularly in a small-scale off-grid setting in North America and internationally. Also, the site specific solar and wind data show that ELA has potential to harvest renewable resources and produce heat and power at competitive

  1. Analysis of ELA-DQB exon 2 polymorphism in Argentine Creole horses by PCR-RFLP and PCR-SSCP.

    Science.gov (United States)

    Villegas-Castagnasso, E E; Díaz, S; Giovambattista, G; Dulout, F N; Peral-García, P

    2003-08-01

    The second exon of equine leucocyte antigen (ELA)-DQB genes was amplified from genomic DNA of 32 Argentine Creole horses by PCR. Amplified DNA was analysed by PCR-restriction fragment length polymorphism (RFLP) and PCR-single-strand conformation polymorphism (SSCP). The PCR-RFLP analysis revealed two HaeIII patterns, four RsaI patterns, five MspI patterns and two HinfI patterns. EcoRI showed no variation in the analysed sample. Additional patterns that did not account for known exon 2 DNA sequences were observed, suggesting the existence of novel ELA-DQB alleles. PCR-SSCP analysis exhibited seven different band patterns, and the number of bands per animal ranged from four to nine. Both methods indicated that at least two DQB genes are present. The presence of more than two alleles in each animal showed that the primers employed in this work are not specific for a unique DQB locus. The improvement of this PCR-RFLP method should provide a simple and rapid technique for an accurate definition of ELA-DQB typing in horses.

  2. Mutations in the ELA2 gene encoding neutrophil elastase are present in most patients with sporadic severe congenital neutropenia but only in some patients with the familial form of the disease.

    Science.gov (United States)

    Ancliff, P J; Gale, R E; Liesner, R; Hann, I M; Linch, D C

    2001-11-01

    Severe congenital neutropenia (SCN) was originally described as an autosomal recessive disorder. Subsequently, autosomal dominant and sporadic forms of the disease have been recognized. All forms are manifest by persistent severe neutropenia and recurrent bacterial infection. In contrast, cyclical hematopoiesis is characterized by periodic neutropenia inter-spaced with (near) normal neutrophil counts. Recently, linkage analysis on 13 affected pedigrees identified chromosome 19p13.3 as the likely position for mutations in cyclical hematopoiesis. Heterozygous mutations in the ELA2 gene encoding neutrophil elastase were detected in all families studied. Further work also demonstrated mutations in ELA2 in sporadic and autosomal dominant SCN. However, all mutations described to date are heterozygous and thus appear to act in a dominant fashion, which is inconsistent with an autosomal recessive disease. Therefore, the current study investigated whether mutations in ELA2 could account for the disease phenotype in classical autosomal recessive SCN and in the sporadic and autosomal dominant types. All 5 exons of ELA2 and their flanking introns were studied in 18 patients (3 autosomal recessive, 5 autosomal dominant [from 3 kindreds], and 10 sporadic) using direct automated sequencing. No mutations were found in the autosomal recessive families. A point mutation was identified in 1 of 3 autosomal dominant families, and a base substitution was identified in 8 of 10 patients with the sporadic form, though 1 was subsequently shown to be a low-frequency polymorphism. These results suggest that mutations in ELA2 are not responsible for classical autosomal recessive Kostmann syndrome but provide further evidence for the role of ELA2 in SCN.

  3. Heterozygous M1V variant of ELA-2 gene mutation associated with G-CSF refractory severe congenital neutropenia.

    Science.gov (United States)

    Setty, Bhuvana A; Yeager, Nicholas D; Bajwa, Rajinder P

    2011-09-01

    Severe congenital neutropenia is an autosomal recessive disorder characterized by maturation arrest at the promyelocyte/myelocyte phase in the bone marrow, absolute neutrophil count ELA-2 have been described. We report the case of a premature male infant with congenital neutropenia, associated with multiple infections, refractory to treatment with granulocyte colony stimulating factor who subsequently underwent matched sibling donor stem-cell transplant. He was found to be heterozygous for the M1V variant of the ELA-2 gene that we postulate to be causative for his severe neutropenia Copyright © 2011 Wiley-Liss, Inc.

  4. ELA-DRA polymorphisms are not associated with Equine Arteritis Virus infection in horses from Argentina.

    Science.gov (United States)

    Kalemkerian, P B; Metz, G E; Peral-Garcia, P; Echeverria, M G; Giovambattista, G; Díaz, S

    2012-12-01

    Polymorphisms at Major Histocompatibility Complex (MHC) genes have been associated with resistance/susceptibility to infectious diseases in domestic animals. The aim of this investigation was to evaluate whether polymorphisms of the DRA gene the Equine Lymphocyte Antigen is associated with susceptibility to Equine Arteritis Virus (EAV) infection in horses in Argentina. The equine DRA gene was screened for polymorphisms using Pyrosequencing® Technology which allowed the detection of three ELA-DRA exon 2 alleles. Neither allele frequencies nor genotypic differentiation exhibited any statistically significant (P-values=0.788 and 0.745) differences between the EAV-infected and no-infected horses. Fisher's exact test and OR calculations did not show any significant association. As a consequence, no association could be established between the serological condition and ELA-DRA. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Jet Injection of 1% buffered lidocaine versus topical ELA-Max for anesthesia before peripheral intravenous catheterization in children: a randomized controlled trial.

    Science.gov (United States)

    Spanos, Stephanie; Booth, Rebekah; Koenig, Heidi; Sikes, Kendra; Gracely, Edward; Kim, In K

    2008-08-01

    Peripheral intravenous (PIV) catheter insertion is a frequent, painful procedure that is often performed with little or no anesthesia. Current approaches that minimize pain for PIV catheter insertion have several limitations: significant delay for onset of anesthesia, inadequate anesthesia, infectious disease exposure risk from needlestick injuries, and patients' needle phobia. Comparison of the anesthetic effectiveness of J-Tip needle-free jet injection of 1% buffered lidocaine to the anesthetic effectiveness of topical 4% ELA-Max for PIV catheter insertion. A prospective, block-randomized, controlled trial comparing J-Tip jet injection of 1% buffered lidocaine to a 30-minute application of 4% ELA-Max for topical anesthesia in children 8 to 15 years old presenting to a tertiary care pediatric emergency department for PIV catheter insertion. All subjects recorded self-reported visual analog scale (VAS) scores for pain at time of enrollment and pain felt following PIV catheter insertion. Jet injection subjects also recorded pain of jet injection. Subjects were videotaped during jet injection and PIV catheter insertion. Videotapes were reviewed by a single blinded reviewer for observer-reported VAS pain scores for jet injection and PIV catheter insertion. Of the 70 children enrolled, 35 were randomized to the J-Tip jet injection group and 35 to the ELA-Max group. Patient-recorded enrollment VAS scores for pain were similar between groups (P = 0.74). Patient-recorded VAS scores were significantly different between groups immediately after PIV catheter insertion (17.3 for J-Tip jet injection vs 44.6 for ELA-Max, P ELA-Max, P = 0.23). J-Tip jet injection of 1% buffered lidocaine provided greater anesthesia than a 30-minute application of ELA-Max according to patient self-assessment of pain for children aged 8 to 15 years undergoing PIV catheter insertion.

  6. Differences in patient selection and outcomes between SilverHawk atherectomy and laser ablation in the treatment of femoropopliteal in-stent restenosis: a retrospective analysis from a single center.

    Science.gov (United States)

    Shammas, Nicolas W; Shammas, Gail A; Jerin, Michael

    2013-12-01

    To analyze differences in the application and outcomes of SilverHawk atherectomy (SH) and excimer laser ablation (ELA) in the treatment of femoropopliteal in-stent restenosis (ISR) in an unselected cohort of patients treated at a single center. Between January 2005 and June 2010, 81 consecutive patients (46 men; mean age 69.1 years, range 43-86) underwent directional atherectomy (41 SH, 40 ELA) for femoropopliteal ISR lesions. Data were reviewed retrospectively on procedural outcomes, major adverse events, and 1-year target lesion revascularization (TLR) obtained from medical records and supplemented with telephone calls. The primary endpoint was symptom-driven TLR at 1 year; secondary endpoints were death and amputation. ELA was utilized more frequently than SH in longer lesions (210.4±104 vs. 126.2±79.3 mm, respectively; p=0.001), subacute presentation (55% vs. 14.6%, p=0.001), TASC D lesions (47.5% vs. 12.2%), and in patients with more angiographic thrombus (42.5% vs. 4.9%, p=0.001). Final angiographic success (<30% residual narrowing post final treatment) was similar between ELA and SH (92.5% vs. 100%, respectively, p=0.12). Bailout stenting was significantly higher with ELA vs. SH (50.0% vs. 24.4%, p=0.022). At 1 year, TLR had occurred in 48.7% of the ELA patients vs. 31.7% of the SH cases (p=0.171). Regression analysis confirmed that SH was a predictor of TLR at 1 year (hazard ratio 2.679, 95% CI 1.015 to 7.073, p=0.047). Both SH and ELA continue to have a high TLR rate in treating ISR of the femoral and popliteal arteries. A higher rate of delayed failure is seen with SH and an earlier, steeper loss of TLR-free survival is seen with ELA.

  7. Detailed characterization of electron sources yielding first demonstration of European X-ray Free-Electron Laser beam quality

    Directory of Open Access Journals (Sweden)

    F. Stephan

    2010-02-01

    Full Text Available The photoinjector test facility at DESY, Zeuthen site (PITZ, was built to develop and optimize photoelectron sources for superconducting linacs for high-brilliance, short-wavelength free-electron laser (FEL applications like the free-electron laser in Hamburg (FLASH and the European x-ray free-electron laser (XFEL. In this paper, the detailed characterization of two laser-driven rf guns with different operating conditions is described. One experimental optimization of the beam parameters was performed at an accelerating gradient of about 43  MV/m at the photocathode and the other at about 60  MV/m. In both cases, electron beams with very high phase-space density have been demonstrated at a bunch charge of 1 nC and are compared with corresponding simulations. The rf gun optimized for the lower gradient has surpassed all the FLASH requirements on beam quality and rf parameters (gradient, rf pulse length, repetition rate and serves as a spare gun for this facility. The rf gun studied with increased accelerating gradient at the cathode produced beams with even higher brightness, yielding the first demonstration of the beam quality required for driving the European XFEL: The geometric mean of the normalized projected rms emittance in the two transverse directions was measured to be 1.26±0.13  mm mrad for a 1-nC electron bunch. When a 10% charge cut is applied excluding electrons from those phase-space regions where the measured phase-space density is below a certain level and which are not expected to contribute to the lasing process, the normalized projected rms emittance is about 0.9 mm mrad.

  8. [Cell-ELA-based determination of binding affinity of DNA aptamer against U87-EGFRvIII cell].

    Science.gov (United States)

    Tan, Yan; Liang, Huiyu; Wu, Xidong; Gao, Yubo; Zhang, Xingmei

    2013-05-01

    A15, a DNA aptamer with binding specificity for U87 glioma cells stably overexpressing the epidermal growth factor receptor variant III (U87-EGFRvIII), was generated by cell systematic evolution of ligands by exponential enrichment (cell-SELEX) using a random nucleotide library. Subsequently, we established a cell enzyme-linked assay (cell-ELA) to detect the affinity of A15 compared to an EGFR antibody. We used A15 as a detection probe and cultured U87-EGFRvIII cells as targets. Our data indicate that the equilibrium dissociation constants (K(d)) for A15 were below 100 nmol/L and had similar affinity compared to an EGFR antibody for U87-EGFRvIII. We demonstrated that the cell-ELA was a useful method to determine the equilibrium dissociation constants (K(d)) of aptamers generated by cell-SELEX.

  9. The English Language Arts (ELA) Exam and Academic Achievement: Is There a Relationship? Predictive Validity of Statewide Measures

    Science.gov (United States)

    Mazza, Lynn

    2010-01-01

    The No Child Left Behind Act is a mandate from the federal government for education to increase student performance and school accountability. As a result of this mandate, many states have issued the use of high-stakes standardized tests as a means of monitoring schools' accountability. New York State administers the English Language Arts (ELA)…

  10. Preparatory procedure and equipment for the European x-ray free electron laser cavity implementation

    Directory of Open Access Journals (Sweden)

    D. Reschke

    2010-07-01

    Full Text Available The European x-ray free electron laser is under construction at Deutsches Elektronen-Synchrotron (DESY. The electron beam energy of up to 17.5 GeV will be achieved by using superconducting accelerator technology. Final prototyping, industrialization, and new infrastructure are the actual challenges with respect to the accelerating cavities. This paper describes the preparation strategy optimized for the cavity preparation procedure in industry. For the industrial fabrication and preparation, several new hardware components have been already developed at DESY. The design and construction of a semiautomated rf-measurement machine for dumbbells and end groups are described. In a collaboration among FNAL, KEK, and DESY, an automatic cavity tuning machine has been designed and four machines are under construction. The functionality of these machines with special attention to safety aspects is described in this paper. A new high pressure rinsing system has been developed and is operational.

  11. FEM numerical analysis of excimer laser induced modification in alternating multi-layers of amorphous and nano-crystalline silicon films

    International Nuclear Information System (INIS)

    Conde, J.C.; Martín, E.; Stefanov, S.; Alpuim, P.; Chiussi, S.

    2012-01-01

    Highlights: ► nc-Si:H is a material with growing importance for a large-area of nano-electronic, photovoltaic or biomedical devices. ► UV-ELA technique causes a rapid heating that provokes the H 2 desorption from the Si surface and bulk material. ► Next, diffusion of P doped nc-Si films and eventually, for high energy densities would be possible to reach the melting point. ► These multilayer structures consisting of thin alternating a-Si:H(10 nm) and n-doped nc-Si:H(60 nm) films deposited on SiO 2 . ► To optimize parameters involved in this processing, FEM numerical analysis of multilayer structures have been performed. ► The numerical results are compared with exhaustive characterization of the experimental results. - Abstract: UV excimer laser annealing (UV-ELA) is an alternative annealing process that, during the last few years, has gained enormous importance for the CMOS nano-electronic technologies, with the ability to provide films and alloys with electrical and optical properties to fit the desired device performance. The UV-ELA of amorphous (a-) and/or doped nano-crystalline (nc-) silicon films is based on the rapid (nanoseconds) formation of temperature profiles caused by laser radiation that is absorbed in the material and lead to crystallisation, diffusion in solid or even in liquid phase. To achieve the desired temperature profiles and to optimize the parameters involved in the processing of hydrogenated nanocrystalline silicon (nc-Si:H) films with the UV-ELA, a numerical analysis by finite element method (FEM) of a multilayer structure has been performed. The multilayer structures, consisting of thin alternating a-Si:H(10 nm) and n-doped nc-Si:H(60 nm) layers, deposited on a glass substrate, has also been experimentally analyzed. Temperature profiles caused by 193 nm radiation with 25 ns pulse length and energy densities ranging from 50 mJ/cm 2 to 400 mJ/cm 2 have been calculated. Numerical results allowed us to estimate the dehydrogenation

  12. Remarkable enhancement on elimination reaction of side groups in excimer laser ablation of mixture targets of perylene derivatives with metal powder

    International Nuclear Information System (INIS)

    Nishio, Satoru; Tamura, Kazuyuki; Tsujine, Yukari; Fukao, Tomoko; Nakano, Masayoshi; Matsuzaki, Akiyoshi; Sato, Hiroyasu

    2002-01-01

    Films are deposited on substrates at 20 deg.C by excimer laser ablation (ELA) of mixture targets of 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) with metal powder, PTCDA/M (M=Co, Ni, Fe, W, Cu and Ag) using XeCl and ArF beams. Large amount of fragments with ''naked'' perylene skeletons can be produced owing to effective elimination of carboxylic dianhydride groups by ELA of PTCDA/Co both with XeCl and ArF beams under optimized ablation conditions. Elimination reaction of side groups of PTCDA is observed for ELA of the targets with metal powder of the iron group, Co, Fe and Ni, especially remarkable for Co and Fe. The film from PTCDA/Ni consists of small particles with the various diameters ranging from 10 to 100 nm as well as that from PTCDA/Co. Morphology like petal of rose can be seen everywhere for the film from PTCDA/Fe

  13. Excimer laser recrystallization of nanocrystalline-Si films deposited by inductively coupled plasma chemical vapour deposition at 150 deg. C

    International Nuclear Information System (INIS)

    Park, Joong-Hyun; Han, Sang-Myeon; Park, Sang-Geun; Han, Min-Koo; Shin, Moon-Young

    2006-01-01

    Polycrystalline silicon thin film transistors (poly-Si TFTs) fabricated at low temperature (under 200 deg. C) have been widely investigated for flexible substrate applications such as a transparent plastic substrate. Unlike the conventional TFT process using glass substrate, the maximum process temperature should be kept less than 200 deg. C in order to avoid thermal damage on flexible substrates. We report the characteristics of nanocrystalline silicon (nc-Si) irradiated by an excimer laser. Nc-Si precursors were deposited on various buffer layers by inductively coupled plasma chemical vapour deposition (ICP-CVD) at 150 deg. C. We employed various buffer layers, such as silicon nitride (SiN X ) and silicon dioxide (SiO 2 ), in order to report recrystallization characteristics in connection with a buffer layer of a different thermal conductivity. The dehydrogenation and recrystallization was performed by step-by-step excimer laser annealing (ELA) (XeCl,λ=308 nm) in order to prevent the explosive release of hydrogen atoms. The grain size of the poly-Si film, which was recrystallized on the various buffer layers, was measured by scanning electron microscopy (SEM) at each laser energy density. The process margin of step-by-step ELA employing the SiN X buffer layer is wider than SiO 2 and the maximum grain size slightly increased

  14. Towards Gotthard-II: development of a silicon microstrip detector for the European X-ray Free-Electron Laser

    Science.gov (United States)

    Zhang, J.; Andrä, M.; Barten, R.; Bergamaschi, A.; Brückner, M.; Dinapoli, R.; Fröjdh, E.; Greiffenberg, D.; Lopez-Cuenca, C.; Mezza, D.; Mozzanica, A.; Ramilli, M.; Redford, S.; Ruat, M.; Ruder, C.; Schmitt, B.; Shi, X.; Thattil, D.; Tinti, G.; Turcato, M.; Vetter, S.

    2018-01-01

    Gotthard-II is a 1-D microstrip detector specifically developed for the European X-ray Free-Electron Laser. It will not only be used in energy dispersive experiments but also as a beam diagnostic tool with additional logic to generate veto signals for the other 2-D detectors. Gotthard-II makes use of a silicon microstrip sensor with a pitch of either 50 μm or 25 μm and with 1280 or 2560 channels wire-bonded to adaptive gain switching readout chips. Built-in analog-to-digital converters and digital memories will be implemented in the readout chip for a continuous conversion and storage of frames for all bunches in the bunch train. The performance of analogue front-end prototypes of Gotthard has been investigated in this work. The results in terms of noise, conversion gain, dynamic range, obtained by means of infrared laser and X-rays, will be shown. In particular, the effects of the strip-to-strip coupling are studied in detail and it is found that the reduction of the coupling effects is one of the key factors for the development of the analogue front-end of Gotthard-II.

  15. Parp-1 genetic ablation in Ela-myc mice unveils novel roles for Parp-1 in pancreatic cancer.

    Science.gov (United States)

    Martínez-Bosch, Neus; Iglesias, Mar; Munné-Collado, Jessica; Martínez-Cáceres, Carlos; Moreno, Mireia; Guerra, Carmen; Yélamos, Jose; Navarro, Pilar

    2014-10-01

    Pancreatic cancer has a dismal prognosis and is currently the fourth leading cause of cancer-related death in developed countries. The inhibition of poly(ADP-ribose) polymerase-1 (Parp-1), the major protein responsible for poly(ADP-ribosy)lation in response to DNA damage, has emerged as a promising treatment for several tumour types. Here we aimed to elucidate the involvement of Parp-1 in pancreatic tumour progression. We assessed Parp-1 protein expression in normal, preneoplastic and pancreatic tumour samples from humans and from K-Ras- and c-myc-driven mouse models of pancreatic cancer. Parp-1 was highly expressed in acinar cells in normal and cancer tissues. In contrast, ductal cells expressed very low or undetectable levels of this protein, both in a normal and in a tumour context. The Parp-1 expression pattern was similar in human and mouse samples, thereby validating the use of animal models for further studies. To determine the in vivo effects of Parp-1 depletion on pancreatic cancer progression, Ela-myc-driven pancreatic tumour development was analysed in a Parp-1 knock-out background. Loss of Parp-1 resulted in increased tumour necrosis and decreased proliferation, apoptosis and angiogenesis. Interestingly, Ela-myc:Parp-1(-/-) mice displayed fewer ductal tumours than their Ela-myc:Parp-1(+/+) counterparts, suggesting that Parp-1 participates in promoting acinar-to-ductal metaplasia, a key event in pancreatic cancer initiation. Moreover, impaired macrophage recruitment can be responsible for the ADM blockade found in the Ela-myc:Parp-1(-/-) mice. Finally, molecular analysis revealed that Parp-1 modulates ADM downstream of the Stat3-MMP7 axis and is also involved in transcriptional up-regulation of the MDM2, VEGFR1 and MMP28 cancer-related genes. In conclusion, the expression pattern of Parp-1 in normal and cancer tissue and the in vivo functional effects of Parp-1 depletion point to a novel role for this protein in pancreatic carcinogenesis and shed light

  16. A clinical study to evaluate the efficacy of ELA-Max (4% liposomal lidocaine) as compared with eutectic mixture of local anesthetics cream for pain reduction of venipuncture in children.

    Science.gov (United States)

    Eichenfield, Lawrence F; Funk, Ann; Fallon-Friedlander, Sheila; Cunningham, Bari B

    2002-06-01

    A double-randomized, blinded crossover trial was performed to assess the efficacy of ELA-Max (4% liposomal lidocaine) as compared with eutectic mixture of local anesthetics (EMLA) for pain relief during pediatric venipuncture procedures. Safety was assessed by evaluation for topical or systemic effects and measurement of serum lidocaine concentrations. A total of 120 children who were scheduled for repeat venipuncture for non-study-related reasons at 2 sites participated in the study. Patients were doubly randomized to treatment regimen (study medication application time of either 30 or 60 minutes) and to the order of application of the topical anesthetics for each venipuncture. The primary outcome measures were the child's rating of pain immediately after the venipuncture procedures using a 100-mm visual analog scale (VAS) tool and the parent's and blinded research observer's Observed Behavioral Distress scores. Both ELA-Max and EMLA seemed to alleviate venipuncture pain. There was no clinically or statistically significant difference in the patient VAS scores within the 30-minute or 60-minute treatment groups, and there was no clinical or statistical difference in VAS scores between the 30-minute ELA-Max treatment without occlusion and the 60-minute EMLA treatment with occlusion. There were no clinically or statistically significant differences between treatment with ELA-Max and EMLA in parental or blinded researcher Observed Behavioral Distress scores, the most frequent response at any observation time being "no distress." This study demonstrates that a 30-minute application of ELA-Max without occlusion is as safe and as effective for ameliorating pain associated with venipuncture as a 60-minute application of the prescription product EMLA requiring occlusion.

  17. Simulation of the European ice sheet through the last glacial cycle and prediction of future glaciation

    International Nuclear Information System (INIS)

    Boulton, G.S.; Payne, A.

    1992-12-01

    Global climates of the recent past appear to correlate with patterns of variation in the earths orbit round the sun. As such orbital changes can be predicted into the future, it is argued that the pattern of natural long-term future change can also be estimated. From this, future trends of glaciation can be inferred. The physical and mathematical basis of a time-dependent, thermo mechanically coupled, three dimensional ice sheet model is described. The model is driven by changes in the equilibrium line altitude (ELA) on its surface. This causes flexure of the underlying lithosphere. The model is tuned to the maximum extension of the last (Weichselian) ice sheet and driven by an ELA fluctuation which reflects the NE Atlantic sea surface temperature fluctuation pattern during the last glacial cycle in such a way that the model reproduces the ice sheet margin at the glacial maximum. The distribution of internal ice sheet velocity, temperature, basal melting rate and sub glacial permafrost penetration are all computed. The model is then tested against its predictions of the areal pattern of ice sheet expansion and decay, the pattern of crustal flexure and relative sea level change, and the distribution of till produced by the last European ice sheet. The tested model is then driven by predictions of future climate change to produce simulations of future ice sheet glaciation in northern Europe

  18. ALADIN: the first european lidar in space

    Science.gov (United States)

    Morançais, Didier; Fabre, Frédéric; Schillinger, Marc; Barthès, Jean-Claude; Endemann, Martin; Culoma, Alain; Durand, Yannig

    2017-11-01

    The Atmospheric LAser Doppler INstrument (ALADIN) is the payload of the ESA's ADMAEOLUS mission, which aims at measuring wind profiles as required by the climatology and meteorology users. ALADIN belongs to a new class of Earth Observation payloads and will be the first European Lidar in space. The instrument comprises a diode-pumped high energy Nd:YAG laser and a direct detection receiver operating on aerosol and molecular backscatter signals in parallel. In addition to the Proto- Flight Model (PFM)., two instrument models are developed: a Pre-development Model (PDM) and an Opto-Structure-Thermal Model (OSTM). The flight instrument design and the industrial team has been finalised and the major equipment are now under development. This paper describes the instrument design and performance as well as the development and verification approach. The main results obtained during the PDM programme are also reported. The ALADIN instrument is developed under prime contractorship from EADS Astrium SAS with a consortium of thirty European companies.

  19. Study on excimer laser irradiation for controlled dehydrogenation and crystallization of boron doped hydrogenated amorphous/nanocrystalline silicon multilayers

    International Nuclear Information System (INIS)

    Gontad, F.; Conde, J.C.; Filonovich, S.; Cerqueira, M.F.; Alpuim, P.; Chiussi, S.

    2013-01-01

    We report on the excimer laser annealing (ELA) induced temperature gradients, allowing controlled crystallization and dehydrogenation of boron-doped a-Si:H/nc-Si:H multilayers. Depth of the dehydrogenation and crystallization process has been studied numerically and experimentally, showing that temperatures below the monohydride decomposition can be used and that significant changes of the doping profile can be avoided. Calculation of temperature profiles has been achieved through numerical modeling of the heat conduction differential equation. Increase in the amount of nano-crystals, but not in their size, has been demonstrated by Raman spectroscopy. Effective dehydrogenation and shape of the boron profile have been studied by time of flight secondary ion mass spectroscopy. The relatively low temperature threshold for dehydrogenation, below the monohydride decomposition temperature, has been attributed to both, the large hydrogen content of the original films and the partial crystallization during the ELA process. The results of this study show that UV-laser irradiation is an effective tool to improve crystallinity and dopant activation in p + -nc-Si:H films without damaging the substrate. - Highlights: • An efficient dehydrogenation is possible through excimer laser annealing. • 140 mJ/cm 2 is enough for dehydrogenation without significant changes in doping profile. • Fluences up to 300 mJ/cm 2 promote partial crystallization of the amorphous structures

  20. Study on excimer laser irradiation for controlled dehydrogenation and crystallization of boron doped hydrogenated amorphous/nanocrystalline silicon multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Gontad, F., E-mail: fran_gontad@yahoo.es [Applied Physics Department, University of Vigo, E.I. Industrial, Campus de As Lagoas, Marcosende, E-36310, Vigo (Spain); Conde, J.C. [Applied Physics Department, University of Vigo, E.I. Industrial, Campus de As Lagoas, Marcosende, E-36310, Vigo (Spain); Filonovich, S.; Cerqueira, M.F.; Alpuim, P. [Department of Physics, University of Minho, Campus de Azurém, 4800-058 Guimarães (Portugal); Chiussi, S. [Applied Physics Department, University of Vigo, E.I. Industrial, Campus de As Lagoas, Marcosende, E-36310, Vigo (Spain)

    2013-06-01

    We report on the excimer laser annealing (ELA) induced temperature gradients, allowing controlled crystallization and dehydrogenation of boron-doped a-Si:H/nc-Si:H multilayers. Depth of the dehydrogenation and crystallization process has been studied numerically and experimentally, showing that temperatures below the monohydride decomposition can be used and that significant changes of the doping profile can be avoided. Calculation of temperature profiles has been achieved through numerical modeling of the heat conduction differential equation. Increase in the amount of nano-crystals, but not in their size, has been demonstrated by Raman spectroscopy. Effective dehydrogenation and shape of the boron profile have been studied by time of flight secondary ion mass spectroscopy. The relatively low temperature threshold for dehydrogenation, below the monohydride decomposition temperature, has been attributed to both, the large hydrogen content of the original films and the partial crystallization during the ELA process. The results of this study show that UV-laser irradiation is an effective tool to improve crystallinity and dopant activation in p{sup +}-nc-Si:H films without damaging the substrate. - Highlights: • An efficient dehydrogenation is possible through excimer laser annealing. • 140 mJ/cm{sup 2} is enough for dehydrogenation without significant changes in doping profile. • Fluences up to 300 mJ/cm{sup 2} promote partial crystallization of the amorphous structures.

  1. Estudo comparativo preliminar entre os alongamentos proprioceptivo e estático passivo em pacientes com seqüelas de hanseníase

    OpenAIRE

    Diaz, Augusto Floricel; Moro, Fabio Luiz; Binotto, Jussara Machado; Fréz, Andersom Ricardo

    2008-01-01

    A proposta deste estudo foi comparar a aplicação de alongamento estático passivo e alongamento proprioceptivo no tratamento de seqüelas de hanseníase. Doze pacientes com essas seqüelas participaram da pesquisa, separados aleatoriamente em dois grupos: o grupo FNP, tratado com facilitação neuromuscular proprioceptiva, e o grupo AEP, com alongamento estático passivo. Ambos realizaram dez sessões de alongamentos, sendo submetidos à avaliação inicial e final nas quais foram aplicados o questionár...

  2. Comparative Evaluation of Triphala and Ela Decoction With 0.2% Chlorhexidine as Mouthwash in the Treatment of Plaque-Induced Gingivitis and Halitosis: A Randomized Controlled Clinical Trial.

    Science.gov (United States)

    Mamgain, Pratibha; Kandwal, Abhishek; Mamgain, Ravindra K

    2016-12-08

    Present study evaluates efficacy of Trifala and Ela as plaque controlling agent and compares it with chlorhexidine. To evaluate Antigingivitis, Antiplaque and Antihalitosis effect of Triphala and Ela decoction. A randomized sample of 60 patients with plaque induced gingivitis was enrolled and equally divided into two groups group A and group B. Group A was given Trifala and Ela decoction and Group B Chlorehexidine mouthwash for 21 days twice daily. Gingival inflammation index, plaque index and Organoleptic scoring scale was recorded at baseline, 14th day and 21st day. Comparing the plaque index for Group A with group B the reduction in from baseline to 14 day was 42.59 % and 38.62% respectively while from baseline to 21 day was 56.20% and 68.57% respectively. On comparing Gingival index for group A with group B the reduction from baseline to 14 day was 31.95% and 38.62 % respectively while from baseline to 21 day was 69.95 % and 68.57% respectively. Halitosis Percentage reduction at 14th day from base line was 33.33% and 38.18%; at 21 day from baseline 66.66% and 72.72% respectively for group A and group B. No statistical significant difference for intergroup comparison was found using paired t test. Intra group analysis using unpaired t test was significant for all the indices at different time intervals. Triphala and Ela decoction is organic, easy to prepare economical and equally effective as compared to chlorhexidine mouthwash. © The Author(s) 2016.

  3. FEM numerical analysis of excimer laser induced modification in alternating multi-layers of amorphous and nano-crystalline silicon films

    Energy Technology Data Exchange (ETDEWEB)

    Conde, J.C., E-mail: jconde@uvigo.es [Dpto. Fisica Aplicada, Universidade de Vigo, Rua Maxwell s/n, Campus Universitario Lagoas Marcosende, Vigo (Spain); Martin, E. [Dpto. Mecanica, Maquinas, Motores Termicos y Fluidos, Universidade de Vigo, Rua Maxwell s/n, Campus Universitario Lagoas Marcosende, Vigo (Spain); Stefanov, S. [Dpto. Fisica Aplicada, Universidade de Vigo, Rua Maxwell s/n, Campus Universitario Lagoas Marcosende, Vigo (Spain); Alpuim, P. [Departamento de Fisica, Universidade do Minho, 4800-058 Guimaraes (Portugal); Chiussi, S. [Dpto. Fisica Aplicada, Universidade de Vigo, Rua Maxwell s/n, Campus Universitario Lagoas Marcosende, Vigo (Spain)

    2012-09-15

    Highlights: Black-Right-Pointing-Pointer nc-Si:H is a material with growing importance for a large-area of nano-electronic, photovoltaic or biomedical devices. Black-Right-Pointing-Pointer UV-ELA technique causes a rapid heating that provokes the H{sub 2} desorption from the Si surface and bulk material. Black-Right-Pointing-Pointer Next, diffusion of P doped nc-Si films and eventually, for high energy densities would be possible to reach the melting point. Black-Right-Pointing-Pointer These multilayer structures consisting of thin alternating a-Si:H(10 nm) and n-doped nc-Si:H(60 nm) films deposited on SiO{sub 2}. Black-Right-Pointing-Pointer To optimize parameters involved in this processing, FEM numerical analysis of multilayer structures have been performed. Black-Right-Pointing-Pointer The numerical results are compared with exhaustive characterization of the experimental results. - Abstract: UV excimer laser annealing (UV-ELA) is an alternative annealing process that, during the last few years, has gained enormous importance for the CMOS nano-electronic technologies, with the ability to provide films and alloys with electrical and optical properties to fit the desired device performance. The UV-ELA of amorphous (a-) and/or doped nano-crystalline (nc-) silicon films is based on the rapid (nanoseconds) formation of temperature profiles caused by laser radiation that is absorbed in the material and lead to crystallisation, diffusion in solid or even in liquid phase. To achieve the desired temperature profiles and to optimize the parameters involved in the processing of hydrogenated nanocrystalline silicon (nc-Si:H) films with the UV-ELA, a numerical analysis by finite element method (FEM) of a multilayer structure has been performed. The multilayer structures, consisting of thin alternating a-Si:H(10 nm) and n-doped nc-Si:H(60 nm) layers, deposited on a glass substrate, has also been experimentally analyzed. Temperature profiles caused by 193 nm radiation with 25

  4. ASSISTÊNCIA DE ENFERMAGEM E AS SEQÜELAS NEUROLÓGICAS DO SARAMPO

    Directory of Open Access Journals (Sweden)

    Magda Andrade Rezende

    Full Text Available As seqüelas neurológicas do sarampo podem ocorrer como conseqüência de encefalites ou constituir o quadro chamado pan-encefalite esclerosante sub-aguda (PEESA. As encefalites são letais em cerca de 15 a 18% dos casos, causando danos permanentes (motores e/ou mentais em aproximadamente 25% dos pacientes. A PEESA é sempre letal. Enfatiza-se as conseqüências sociais e econômicas destes problemas. Sugere-se assistência de enfermagem de acordo com os níveis de prevenção de Leave 11 & Clark.

  5. Radiochemical tools at the experimental lakes area (ELA) in Ontario, Canada

    International Nuclear Information System (INIS)

    Pfitzner, J.; Brunskill, G.

    1998-01-01

    Full text: For over 20 years, Canadian research scientists have used radiochemical tracers added to remote and pristine lakes to study physical, chemical, and biological processes that could not be easily quantified by other methods. Lakes have also been manipulated by experimentally altering the hydrological cycle, chemical composition, and species of fish in selected lakes, and using companion lakes as controls. Varying additions of organic carbon, N, and P have been done, and the exchange rate of carbon dioxide between the atmosphere and water was estimated using radon evasion rates from radium spikes in the lake water. Multinuclide spikes were done to follow the path of mine waste elements through the food chain and sediment accumulation. Lakes were experimentally acidified with HCl and HNO 3 and H 2 SO 4 to simulate acid rain, and to study natural buffering capacity of the hydrological cycle. Some of this research has been used to legislate pollution control in the St. Laurence Great Lakes and across Canada and USA. ELA research team spirit has survived several forest fires, bear attacks on the kitchen, massive cut-backs in funding and reduction in staff of Fisheries and Ocean Canada

  6. Surface morphologies of excimer-laser annealed BF2+ implanted Si diodes

    International Nuclear Information System (INIS)

    Burtsev, A.; Schut, H.; Nanver, L.K.; Veen, A. van; Slabbekoorn, J.; Scholtes, T.L.M.

    2004-01-01

    Laser-induced surface roughness and damage formation in ultra-shallow n + -p and p + -n junctions, formed by low energy (5 keV) As + and BF 2 + implantations in Si, respectively, with a dose of 1 x 10 15 cm -2 have been investigated by atomic force microscopy (AFM) and Positron Annihilation Doppler Broadening (PADB) technique. The Si surface roughness is found to increase with laser energy density, and reaches a value of 3.5 nm after excimer-laser annealing (ELA) at 1100 mJ/cm 2 . However, anomalous behavior is witnessed for BF 2 + -implanted Si sample at 800 mJ/cm 2 , at which energy very high surface protrusions up to 9 nm high are observed. By PADB this behavior is correlated to extensive deep microcavity formation in the Si whereby the volatile F 2 fraction can accumulate and evaporate/out-diffuse, leading to Si surface roughening. The consequences for the diode characteristics and contact resistivity are examined

  7. Perceptions about the Influence of Instructional Leadership Practices of Elementary Principals on Teachers' ELA Pedagogical Changes in High-Poverty NYC Elementary Schools

    Science.gov (United States)

    Green, Linda D.

    2017-01-01

    This quantitative study examined the relationships between instructional leadership practices of elementary school principals in high-poverty schools and changes in teachers' ELA instructional practices. This research sought to identify principals' perceptions about their use of instructional leadership practices and the teaching practices used in…

  8. ptf1a+ , ela3l- cells are developmentally maintained progenitors for exocrine regeneration following extreme loss of acinar cells in zebrafish larvae.

    Science.gov (United States)

    Schmitner, Nicole; Kohno, Kenji; Meyer, Dirk

    2017-03-01

    The exocrine pancreas displays a significant capacity for regeneration and renewal. In humans and mammalian model systems, the partial loss of exocrine tissue, such as after acute pancreatitis or partial pancreatectomy induces rapid recovery via expansion of surviving acinar cells. In mouse it was further found that an almost complete removal of acinar cells initiates regeneration from a currently not well-defined progenitor pool. Here, we used the zebrafish as an alternative model to study cellular mechanisms of exocrine regeneration following an almost complete removal of acinar cells. We introduced and validated two novel transgenic approaches for genetically encoded conditional cell ablation in the zebrafish, either by caspase-8-induced apoptosis or by rendering cells sensitive to diphtheria toxin. By using the ela3l promoter for exocrine-specific expression, we show that both approaches allowed cell-type-specific removal of >95% of acinar tissue in larval and adult zebrafish without causing any signs of unspecific side effects. We find that zebrafish larvae are able to recover from a virtually complete acinar tissue ablation within 2 weeks. Using short-term lineage-tracing experiments and EdU incorporation assays, we exclude duct-associated Notch-responsive cells as the source of regeneration. Rather, a rare population of slowly dividing ela3l- negative cells expressing ptf1a and CPA was identified as the origin of the newly forming exocrine cells. Cells are actively maintained, as revealed by a constant number of these cells at different larval stages and after repeated cell ablation. These cells establish ela3l expression about 4-6 days after ablation without signs of increased proliferation in between. With onset of ela3l expression, cells initiate rapid proliferation, leading to fast expansion of the ela3l -positive population. Finally, we show that this proliferation is blocked by overexpression of the Wnt-signaling antagonist dkk1b In conclusion, we

  9. Matriarhaat või patriarhaat - kas meeste päralt on ainult reede? : "M Klubi" 80! / Ela Tomson ; intervjueerinud Anti Einpaul

    Index Scriptorium Estoniae

    Tomson, Ela, 1945-

    1998-01-01

    Teleseriaal "M Klubi" uuel hooajal, stsenarist Toomas Kall, režissöör Roman Baskin : Baltic Entertainment Company. Võrdlus teiste seriaalidega. Arvamuse ütlesid Ela Tomson, Mati Põldre, Jaak Allik, Eino Baskin

  10. ptf1a+, ela3l− cells are developmentally maintained progenitors for exocrine regeneration following extreme loss of acinar cells in zebrafish larvae

    Science.gov (United States)

    Schmitner, Nicole; Kohno, Kenji

    2017-01-01

    ABSTRACT The exocrine pancreas displays a significant capacity for regeneration and renewal. In humans and mammalian model systems, the partial loss of exocrine tissue, such as after acute pancreatitis or partial pancreatectomy induces rapid recovery via expansion of surviving acinar cells. In mouse it was further found that an almost complete removal of acinar cells initiates regeneration from a currently not well-defined progenitor pool. Here, we used the zebrafish as an alternative model to study cellular mechanisms of exocrine regeneration following an almost complete removal of acinar cells. We introduced and validated two novel transgenic approaches for genetically encoded conditional cell ablation in the zebrafish, either by caspase-8-induced apoptosis or by rendering cells sensitive to diphtheria toxin. By using the ela3l promoter for exocrine-specific expression, we show that both approaches allowed cell-type-specific removal of >95% of acinar tissue in larval and adult zebrafish without causing any signs of unspecific side effects. We find that zebrafish larvae are able to recover from a virtually complete acinar tissue ablation within 2 weeks. Using short-term lineage-tracing experiments and EdU incorporation assays, we exclude duct-associated Notch-responsive cells as the source of regeneration. Rather, a rare population of slowly dividing ela3l-negative cells expressing ptf1a and CPA was identified as the origin of the newly forming exocrine cells. Cells are actively maintained, as revealed by a constant number of these cells at different larval stages and after repeated cell ablation. These cells establish ela3l expression about 4-6 days after ablation without signs of increased proliferation in between. With onset of ela3l expression, cells initiate rapid proliferation, leading to fast expansion of the ela3l-positive population. Finally, we show that this proliferation is blocked by overexpression of the Wnt-signaling antagonist dkk1b. In

  11. Nano-crystallization in ZnO-doped In_2O_3 thin films via excimer laser annealing for thin-film transistors

    International Nuclear Information System (INIS)

    Fujii, Mami N.; Ishikawa, Yasuaki; Bermundo, Juan Paolo Soria; Uraoka, Yukiharu; Ishihara, Ryoichi; Cingel, Johan van der; Mofrad, Mohammad R. T.; Kawashima, Emi; Tomai, Shigekazu; Yano, Koki

    2016-01-01

    In a previous work, we reported the high field effect mobility of ZnO-doped In_2O_3 (IZO) thin film transistors (TFTs) irradiated by excimer laser annealing (ELA) [M. Fujii et al., Appl. Phys. Lett. 102, 122107 (2013)]. However, a deeper understanding of the effect of ELA on the IZO film characteristics based on crystallinity, carrier concentrations, and optical properties is needed to control localized carrier concentrations for fabricating self-aligned structures in the same oxide film and to adequately explain the physical characteristics. In the case of as-deposited IZO film used as the channel, a high carrier concentration due to a high density of oxygen vacancies was observed; such a film does not show the required TFT characteristics but can act as a conductive film. We achieved a decrease in the carrier concentration of IZO films by crystallization using ELA. This means that ELA can form localized conductive or semi-conductive areas on the IZO film. We confirmed that the reason for the carrier concentration decrease was the decrease of oxygen-deficient regions and film crystallization. The annealed IZO films showed nano-crystalline phase, and the temperature at the substrate was substantially less than the temperature limit for flexible films such as plastic, which is 50°C. This paves the way for the formation of self-aligned structures and separately formed conductive and semi-conductive regions in the same oxide film.

  12. Laser contrast and other key parameters enhancing the laser conversion efficiency in ion acceleration regime

    Science.gov (United States)

    Torrisi, Lorenzo

    2018-01-01

    Measurements of ion acceleration in plasma produced by fs lasers at intensity of the order of 1018 W/cm2 have been performed in different European laboratories. The forward emission in target-normal-sheath-acceleration (TNSA) regime indicated that the maximum energy is a function of the laser parameters, of the irradiation conditions and of the target properties.In particular the laser intensity and contrast play an important role to maximize the ion acceleration enhancing the conversion efficiency. Also the use of suitable prepulses, focal distances and polarized laser light has important roles. Finally the target composition, surface, geometry and multilayered structure, permit to enhance the electric field driving the forward ion acceleration.Experimental measurements will be reported and discussed.

  13. Nano-crystallization in ZnO-doped In{sub 2}O{sub 3} thin films via excimer laser annealing for thin-film transistors

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, Mami N., E-mail: f-mami@ms.naist.jp; Ishikawa, Yasuaki; Bermundo, Juan Paolo Soria; Uraoka, Yukiharu [Nara Institute of Science and Technology, 8916-5 Takayama, Ikoma, Nara 630-0192 (Japan); Ishihara, Ryoichi; Cingel, Johan van der; Mofrad, Mohammad R. T. [Delft University of Technology, Feldmannweg 17, P.O. Box 5053, 2600 GB Delft (Netherlands); Kawashima, Emi; Tomai, Shigekazu; Yano, Koki [Idemitsu Kosan Co., Ltd., 1280 Kami-izumi, Sodegaura, Chiba, 299-0293 (Japan)

    2016-06-15

    In a previous work, we reported the high field effect mobility of ZnO-doped In{sub 2}O{sub 3} (IZO) thin film transistors (TFTs) irradiated by excimer laser annealing (ELA) [M. Fujii et al., Appl. Phys. Lett. 102, 122107 (2013)]. However, a deeper understanding of the effect of ELA on the IZO film characteristics based on crystallinity, carrier concentrations, and optical properties is needed to control localized carrier concentrations for fabricating self-aligned structures in the same oxide film and to adequately explain the physical characteristics. In the case of as-deposited IZO film used as the channel, a high carrier concentration due to a high density of oxygen vacancies was observed; such a film does not show the required TFT characteristics but can act as a conductive film. We achieved a decrease in the carrier concentration of IZO films by crystallization using ELA. This means that ELA can form localized conductive or semi-conductive areas on the IZO film. We confirmed that the reason for the carrier concentration decrease was the decrease of oxygen-deficient regions and film crystallization. The annealed IZO films showed nano-crystalline phase, and the temperature at the substrate was substantially less than the temperature limit for flexible films such as plastic, which is 50°C. This paves the way for the formation of self-aligned structures and separately formed conductive and semi-conductive regions in the same oxide film.

  14. 31. European Conference on Laser Interaction with Matter. Book of abstracts

    International Nuclear Information System (INIS)

    2010-01-01

    The ECLIM conferences on the field of high intensity laser-matter interactions. In this year has the 50th anniversary of Maiman's first laser. ECLIM is a conference for all types of laser-matter interactions, especially for those occurring at high power. New lasers, new ideas are traditionally welcome. Applications as inertial fusion energy have been the driving force in the last decades towards increasing laser intensity, and toward the discovery of new, nonlinear interactions. This time the organizers want to open the doors even broader toward short-pulse laser-plasma interactions and attophysics, organizing even special session for the Extreme Light Infrastructure (ELI). ECLIM is this time hosted the first time in Hungary, one of the sites of the future's great undertaking, the ELI laser. (S.I.)

  15. European XFEL (in Polish)

    CERN Document Server

    Romaniuk, R S

    2013-01-01

    European X-Ray FEL – free electron laser is under construction in DESY Hamburg. It is scheduled to be operational at 2015/16 at a cost more than 1 billion Euro. The laser uses SASE method to generate x-ray light. It is propelled by an electron linac of 17,5GeV energy and more than 2km in length. The linac uses superconducting SRF TESLA technology working at 1,3 GHz in frequency. The prototype of EXFEL is FLASH Laser (200 m in length), where the “proof of principle” was checked, and from the technologies were transferred to the bigger machine. The project was stared in the nineties by building a TTF Laboratory -Tesla Test Facility. The EXFEL laser is a child of a much bigger teraelectronovolt collider project TESLA (now abandoned in Germany but undertaken by international community in a form the ILC). A number of experts and young researchers from Poland participate in the design, construction and research of the FLASH and EXFEL lasers.

  16. Mulheres com diabete melito gestacional : conhecendo a doença e convivendo com ela

    OpenAIRE

    Joice Moreira Schmalfuss

    2011-01-01

    O diabete melito gestacional é um grupo de doenças metabólicas que pode afetar qualquer mulher e, quando não controlado, causar consequências graves para o binômio mãe/bebê. Trata-se de uma pesquisa qualitativa, do tipo descritivoexploratório, que analisou o que as mulheres com diabete melito gestacional conhecem sobre a doença e como elas convivem com essa condição. O estudo foi realizado em um hospital universitário do município de Porto Alegre/RS, por meio de entrevistas com 25 gestantes d...

  17. Common Core State Standards for ELA/Literacy and Next Generation Science Standards: Convergences and Discrepancies Using Argument as an Example

    Science.gov (United States)

    Lee, Okhee

    2017-01-01

    As the Common Core State Standards (CCSS) for English language arts (ELA)/literacy and the Next Generation Science Standards (NGSS) highlight connections across subject areas, convergences and discrepancies come into view. As a prominent example, this article focuses on how the CCSS and the NGSS treat "argument," especially in Grades…

  18. Highlights from e-EPS: New milestone reached for the European XFEL construction

    CERN Multimedia

    Jorge Rivero González

    2013-01-01

    e-EPS News is an addition to the CERN Bulletin line-up, showcasing articles from e-EPS – the European Physical Society newsletter – as part of a collaboration between the two publications.   In June 2013 an important milestone was reached for the European X-ray free-electron laser [XFEL] with the completion of its underground portion. Located in the Hamburg area (Germany), the European XFEL is one of the largest and most ambitious European projects to date. Starting full operations in 2016, the European XFEL is expected to generate intensive, ultrashort X-ray flashes that will open up entirely new areas of research with X-rays that are currently inaccessible. Organisations from 12 European countries, Denmark, France, Germany, Greece, Hungary, Italy, Poland, Russia, Slovakia, Spain, Sweden and Switzerland are members of the European XFEL consortium, with the Deutsches Elektronen-Synchrotron [DESY] as the main shareholder. The total length of the facility will be 3.4km and ...

  19. Assessment of area, volume and ELA of glacial systems in Northeast Russia from satellite images in the beginning of XXI century

    Directory of Open Access Journals (Sweden)

    M. D. Ananicheva

    2014-01-01

    Full Text Available The paper compares remotely sensed glacier inventories of the Byrranga, Suntar-Khayata, and Chersky ranges (2003, Koryak Highland and Chukotka mountains (2008 with data from the Inventory of Glaciers of the USSR (1945–1985. We studied changes in glacier area since the Inventory, which was primarily based on aerial photos and field research. The glaciers have been classified by orientation (aspect and morphological type. Overall the glacierization of the Chersky Range (1970–2003, Suntar-Khayata (1945–2003, Byrranga (1967–2003, Koryak Highland (1950–2003 and Meynypilginsky Range (1984–2008 reduced by about 30, 20, 15, 60 (debatable value and 25% respectively due to summer temperature rise. Calculation of glacier volumes for the dates indicated in the USSR Glacier Inventory and satellite imagery: during this period in sum for 5 studied glacier regions the area, covered by ice, has decreased by 225.2 km², and ice volume – by 8.7 Gtg. Construction of spatial patterns (maps of current ELA for 3 different by climate mountain regions – the Suntar-Khayata Mountains– Chersky Range, and Meynypilgynsky Range ( North Far East, showed that despite of retreat of the glaciers, the mean ELA change for the first studied region is not large compared with the data from the Glacier Inventory (100 m , and significant for the second (100–150 m.

  20. Intraductal delivery of adenoviruses targets pancreatic tumors in transgenic Ela-myc mice and orthotopic xenografts.

    Science.gov (United States)

    José, Anabel; Sobrevals, Luciano; Miguel Camacho-Sánchez, Juan; Huch, Meritxell; Andreu, Núria; Ayuso, Eduard; Navarro, Pilar; Alemany, Ramon; Fillat, Cristina

    2013-01-01

    Gene-based anticancer therapies delivered by adenoviruses are limited by the poor viral distribution into the tumor. In the current work we have explored the feasibility of targeting pancreatic tumors through a loco-regional route. We have taken advantage of the ductal network in the pancreas to retrogradelly inject adenoviruses through the common bile duct in two different mouse models of pancreatic carcinogenesis: The transgenic Ela-myc mice that develop mixed neoplasms displaying both acinar-like and duct-like neoplastic cells affecting the whole pancreas; and mice bearing PANC-1 and BxPC-3 orthotopic xenografts that constitute a model of localized human neoplastic tumors. We studied tumor targeting and the anticancer effects of newly thymidine kinase-engineered adenoviruses both in vitro and in vivo, and conducted comparative studies between intraductal or intravenous administration. Our data indicate that the intraductal delivery of adenovirus efficiently targets pancreatic tumors in the two mouse models. The in vivo application of AduPARTKT plus ganciclovir (GCV) treatment induced tumor regression in Ela-myc mice. Moreover, the intraductal injection of ICOVIR15-TKT oncolytic adenoviruses significantly improved mean survival of mice bearing PANC-1 and BxPC-3 pancreatic xenografts from 30 to 52 days and from 20 to 68 days respectively (p less than 0.0001) when combined with GCV. Of notice, both AduPARTKT and ICOVIR15-TKT antitumoral responses were stronger by ductal viral application than intravenously, in line with the 38-fold increase in pancreas transduction observed upon ductal administration. In summary our data show that cytotoxic adenoviruses retrogradelly injected to the pancreas can be a feasible approach to treat localized pancreatic tumors.

  1. Effects of DC gate and drain bias stresses on the degradation of excimer laser crystallized polysilicon thin film transistors

    International Nuclear Information System (INIS)

    Kouvatsos, D N; Michalas, L; Voutsas, A T; Papaioannou, G J

    2005-01-01

    The effects of gate and drain bias stresses on thin film transistors fabricated in polysilicon films crystallized using the advanced sequential lateral solidification excimer laser annealing (SLS ELA) process, which yields very elongated polysilicon grains and allows the fabrication of TFTs without grain boundary barriers to current flow, are investigated as a function of the active layer thickness and of the TFT orientation relative to the grains. The application of hot carrier stress, with a condition of V GS = V DS /2, was determined to induce threshold voltage, subthreshold swing and transconductance degradation for TFTs in thicker polysilicon films and the associated stress-induced increase in the active layer trap density was evaluated. However, this device degradation was drastically reduced for TFTs fabricated in ultra-thin films. Furthermore, the application of the same stress condition to TFTs oriented vertically to the elongated grains resulted in similar threshold voltage shift but in substantially decreased subthreshold swing and transconductance degradation. The immunity of ultra-thin active layer devices to degradation under hot carrier stress clearly suggests the implementation of ultra thin SLS ELA polysilicon films for the fabrication of TFTs exhibiting not only high performance but, especially, the high reliability needed for integrated systems on panel

  2. Underwater laser cutting of metallic structures

    International Nuclear Information System (INIS)

    Alfille, J.P.; Schildknecht, J.; Ramaswami, V.S.

    1993-01-01

    In the frame of an european contract, the feasibility of the underwater cutting with a CO 2 laser power is studied. The aim of this work is the dismantling metallic structures of reactors pools. The paper analyzes the general concept of the experimental device, the underwater cutting head, the experimenting vessel, examples of cuttings in dismantling situation with a 500 W CO 2 laser, and examples of cuttings with a 5 kW CO 2 laser. (author). 2 refs., 9 figs., 2 tabs

  3. Fundamentals of ultrafast laser-material interaction

    Czech Academy of Sciences Publication Activity Database

    Shugaev, M.V.; Wu, Ch.; Armbruster, O.; Naghilou, A.; Brouwer, N.; Ivanov, D.S.; Derrien, Thibault; Bulgakova, Nadezhda M.; Kautek, W.; Rethfeld, B.; Zhigilei, L.

    2016-01-01

    Roč. 41, č. 12 (2016), s. 960-968 ISSN 0883-7694 R&D Projects: GA MŠk LO1602; GA ČR GA16-12960S EU Projects: European Commission(XE) 657424 - QuantumLaP Institutional support: RVO:68378271 Keywords : femtosecond laser * Coulomb explosion * microscopic mechanisms * electron-diffraction * molecular- dynamics * metal targets * ablation * surface * dielectrics Subject RIV: BH - Optics, Masers, Lasers OBOR OECD: Optics (including laser optics and quantum optics) Impact factor: 5.199, year: 2016

  4. Analysis of processes participating during intense iodine-laser-beam interactions with laser-produced plasmas

    Czech Academy of Sciences Publication Activity Database

    Láska, Leoš; Badziak, J.; Jungwirth, Karel; Kalal, M.; Krása, Josef; Krouský, Eduard; Kubeš, P.; Margarone, Daniele; Parys, P.; Pfeifer, Miroslav; Rohlena, Karel; Rosinski, M.; Ryč, L.; Skála, Jiří; Torrisi, L.; Ullschmied, Jiří; Velyhan, Andriy; Wolowski, J.

    2010-01-01

    Roč. 165, 6-10 (2010), s. 463-471 ISSN 1042-0150 R&D Projects: GA MŠk(CZ) LC528; GA AV ČR IAA100100715 EU Projects: European Commission(XE) 228334 - LASERLAB-EUROPE Institutional research plan: CEZ:AV0Z10100523; CEZ:AV0Z20430508 Keywords : laser plasma * non-linear processes * magnetic self-focusing * pinching Subject RIV: BH - Optics, Masers, Lasers Impact factor: 0.660, year: 2010

  5. Evaluation of Little Ice Age cooling in Western Central Andes, suggested by paleoELAs, in contrast with global warming since late 19th century deduced from instrumental records

    Science.gov (United States)

    Ubeda, Jose; Palacios, David; Campos, Néstor; Giraldez, Claudia; García, Eduardo; Quiros, Tatiana

    2015-04-01

    This paper attempts to evaluate climate cooling (°C) during the glacial expansion phases using the product GTV•ΔELA, where GTV is the vertical air temperature gradient (°C/m) and ΔELA (m) the difference in level observed between the Equilibrium Line Altitude (ELA) reconstructions for current and past glaciers. With this aim the Area x Altitude Balance Ratio-(AABR) method was used to produce reconstructions of present ELAs (2002-2010) and paleoELAs corresponding to the last glacier advance phase. The reconstructions were produced in three study areas located along a N-S transect of the western cordillera in the Central Andes: the south-western sector of the Nevado Hualcán (9°S, 77°W; Giráldez 2011); the southern slope of the Cordillera Pariaqaqa (12°S, 76°W; Quirós, 2013) and the NW, NE, SE and SW quadrants of the Nevado Coropuna (16°S, 72°W; García 2013; Úbeda 2011; Campos, 2012). The three mountains exceed 6000 m altitude, their summit areas are covered by glaciers, and on their slopes there are existing well-conserved moraines deposited by the last advances near the present front of the ice masses. Although there are no absolute dates to confirm this hypothesis, it has been assumed that the last glacial advances occurred during the Little Ice Age (LIA), which the oxygen isotopes of the Nevado Huascarán (9°S, 77°W) date to the period 1500-1890. For the Hualcán and Pariaqaqa the mean global value of the Earth's GTV (6.5°C/km) was used, considered valid for the Tropics. On the Coropuna a GTV=8.4°C/km was used, based on high resolution sensors installed in situ since 2007 (Úbeda 2011). This gradient is approaching the upper limit of the dry adiabatic gradient (9.8°C/km), as the Coropuna region is more arid than the other case study areas. The climate cooling estimates deduced from the product GTV•ΔELA were compared with the global warming shown by the 1880-2012 series, ΔT=0.85°C, and 1850/1900-2003/2012, ΔT=0.78°C. The differences are

  6. The European UV/VUV storage ring FEL at ELETTRA: first operation and future prospects

    CERN Document Server

    Walker, R P; Couprie, Marie Emmanuelle; Dattoli, Giuseppe; Eriksson, M; Garzella, D; Giannessi, L; Marsi, M; Poole, M W; Renault, E; Roux, R; Trovò, M; Werin, S; Wille, K

    2001-01-01

    A European project to develop the first storage ring free-electron laser on a third-generation synchrotron radiation facility is presented, including a description of the main features, initial performance at 350 and 220 nm and future prospects.

  7. Ho:YLF pumped HBr laser

    CSIR Research Space (South Africa)

    Botha, LR

    2009-10-01

    Full Text Available , “Optically Pumped Mid-Infrared HBr Laser,” IEEE J. Quantum Electron. 30(10), 2395–2400 (1994). 2. C. S. Kletecka, N. Campbell, C. R. Jones, J. W. Nicolson, and W. Rudolph, “Cascade Lasing of Molecular HBr in the Four Micron Region Pumped by a Nd:YAG laser...-Infrared Coherent Sources, (European Physical Society 2009) Invited Talk Mo3. 5. C. Bollig, H. J. Strauss, M. J. D. Esser, W. Koen, M.Schellhorn, D. Preussler, K. Nyangaza, C. Jacobs, E. H. Bernardi and L. R. Botha, “Compact Fibre-Laser-Pumped Ho:YLF Oscillator...

  8. The Probability of a General Education Student Placed in a Co-Taught Inclusive Classroom of Passing the 2014 New York State ELA and Mathematics Assessment in Grades 6-8

    Science.gov (United States)

    St. John, Michael M.; Babo, Gerard

    2015-01-01

    This study examined the influence of placement in a co-taught inclusive classroom on the academic achievement of general education students in grades 6-8 in a suburban New York school district on the 2014 New York State ELA and Mathematics Assessments. Propensity Score Matching (PSM) was utilized for sample selection in order to simulate a more…

  9. Study of laser plasma emission from doped targets

    Czech Academy of Sciences Publication Activity Database

    Velardi, L.; Krása, Josef; Velyhan, Andriy; Nassisi, V.

    2012-01-01

    Roč. 83, č. 2 (2012), , "02B911-1"-"02B911-3" ISSN 0034-6748 R&D Projects: GA MŠk(CZ) 7E09092; GA MŠk(CZ) LC528 EU Projects: European Commission(XE) 228334 - LASERLAB-EUROPE Institutional research plan: CEZ:AV0Z10100523 Keywords : copper * excimer lasers * ion mobility * krypton compounds * laser ablation Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.602, year: 2012

  10. Microbunch preserving bending system for a helical radiator at the European X-ray Free Electron Laser

    Directory of Open Access Journals (Sweden)

    Y. Li

    2010-08-01

    Full Text Available At the European X-ray Free Electron Laser there is a planar undulator system under construction called SASE3, which produces intense linearly polarized light in the wavelength range from 0.4–1.6 nm. Nevertheless there is a strong demand for circularly polarized radiation in this wavelength range. An important part of a potential solution is described in this paper. After the planar undulator the electron beam, which is completely bunched, is sent through a suitable radiator. This can be an economically and technically convenient method to generate radiation with polarization properties, which are determined only by the radiator. If in addition a bend is used to separate the light created by the linear SASE3 from that of the radiator, two beam lines may be served, one with planar and one with circular radiation. In this case the light of the helical radiator is not contaminated by the light generated by the planar system. In order to obtain coherent radiation in the radiator, the microbunching of the planar undulator must be preserved throughout the bend. This is the basic problem. In this paper a fundamental, basic study is made. Several solutions for bending systems are presented, whose complexities, wavelength ranges, and debunching effects are different. The expected circular polarization and radiation power by such a bend are simulated for a model radiator.

  11. Experimental study of the interaction of two laser-driven radiative shocks at the PALS laser

    Czech Academy of Sciences Publication Activity Database

    Singh, R.L.; Stehlé, C.; Suzuki-Vidal, F.; Kozlová, Michaela; Larour, J.; Chaulagain, Uddhab P.; Clayson, T.; Rodriguez, R.; Gil, J.M.; Nejdl, Jaroslav; Krůs, Miroslav; Dostál, Jan; Dudžák, Roman; Barroso, P.; Acef, O.; Cotelo, M.; Velarde, P.

    2017-01-01

    Roč. 23, June (2017), s. 20-30 ISSN 1574-1818 R&D Projects: GA MŠk EE2.3.30.0057; GA MŠk EE2.3.20.0279; GA MŠk ED1.1.00/02.0061; GA MŠk(CZ) LM2015083 EU Projects: European Commission(XE) 284464 - LASERLAB-EUROPE Grant - others:ELI Beamlines(XE) CZ.1.05/1.1.00/02.0061; OP VK 4 POSTDOK(XE) CZ.1.07/2.3.00/30.0057; LaserZdroj (OP VK 3)(XE) CZ.1.07/2.3.00/20.0279; ELI Beamlines(XE) CZ.1.05/1.1.00/02.0061 Institutional support: RVO:68378271 ; RVO:61389021 Keywords : radiative shocks * hydrodynamics laser-plasmas * spectroscopy * laboratory astrophysics Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 0.908, year: 2016

  12. Study of the Powerful Nd:YLF Laser Amplifiers for the CTF3 Photoinjectors

    CERN Document Server

    Petrarca, M; Luchinin, G; Divall, M

    2011-01-01

    A high-power neodymium-doped yttrium lithium fluoride (Nd:YLF) mode-locked 1.5-GHz laser currently used to drive the two photoinjectors of the Compact Linear Collider Test Facility project at the European Organization for Nuclear Research is described. A phenomenological characterization of the two powerful Nd:YLF amplifiers is presented and compared with the measurements. The laser system operates in a saturated steady-state mode. This mode provides good shot-to-shot stability with pulse train mean power in the 10 kW range.

  13. Nr 302 - Report made on the behalf of the Foreign affairs, defence and armed forces Commission (1) on the bill project authorizing the approval of the convention related to the construction and exploitation of European X-ray free-electron laser

    International Nuclear Information System (INIS)

    Pintat, Xavier

    2013-01-01

    This report concerns the convention which defined the construction and exploitation conditions by currently twelve European countries of a large scientific research installation, the X-ray Free Electron Laser (XFEL), which can create a considerably more powerful and precise light than any other laser, by means of a self amplifying spontaneous emission effect (SASE effect). This installation is to be built in the German regions of Hamburg and Schleswig-Holstein. The author briefly describes this project, its scientific challenges and objectives. He indicates the involved countries and partners, and some key figures about construction. He addresses the current and programmed investments. He presents the economic and political framework and the legal framework, evokes agreements of the same type already signed by France, and outlines the peculiarities of the convention

  14. Laser-driven ablation through fast electrons in PALS experiment at the laser radiation intensity of 1–50 PW/cm2

    Czech Academy of Sciences Publication Activity Database

    Gus’kov, S.Yu.; Demchenko, N. N.; Kasperczuk, A.; Pisarczyk, T.; Kalinowska, Z.; Chodukowski, T.; Renner, Oldřich; Šmíd, Michal; Krouský, Eduard; Pfeifer, Miroslav; Skála, Jiří; Ullschmied, Jiří; Pisarczyk, P.

    2014-01-01

    Roč. 32, č. 1 (2014), s. 177-195 ISSN 0263-0346 R&D Projects: GA MŠk LM2010014; GA MŠk EE2.3.20.0279 EU Projects: European Commission(XE) 284464 - LASERLAB-EUROPE Grant - others:AVČR(CZ) M100101208; LaserZdroj (OP VK 3)(XE) CZ.1.07/2.3.00/20.0279 Institutional support: RVO:68378271 ; RVO:61389021 Keywords : inertial confinement fusion * shock ignition * laser-produced plasma * three-frame interferometry * X-ray spectroscopy * fast electron generation Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.295, year: 2014

  15. Status of High Data Rate Intersatellite Laser Communication as an Enabler for Earth and Space Science

    Science.gov (United States)

    Heine, F.; Zech, H.; Motzigemba, M.

    2017-12-01

    Space based laser communication is supporting earth observation and science missions with Gbps data download capabilities. Currently the Sentinel 1 and Sentinel 2 spacecrafts from the Copernicus earth observation program of the European Commission are using the Gbps laser communication links developed by Tesat Spacecom to download low latency data products via a commercial geostationary laser relay station- the European Data Relay Service- (EDRS) as a standard data path, in parallel to the conventional radio frequency links. The paper reports on the status of high bandwidth space laser communication as an enabler for small and large space science missions ranging from cube sat applications in low earth orbit to deep space missions. Space based laser communication has left the experimental phase and will support space science missions with unprecedented data rates.

  16. Analysis of the cool down related cavity performance of the European XFEL vertical acceptance tests

    Energy Technology Data Exchange (ETDEWEB)

    Wenskat, Marc; Schaffran, J.

    2017-09-15

    For the European X-Ray Free Electron Laser (XFEL) cavity production, the cold radio-frequency (RF) test of the cavities at 2 K after delivery from the two vendors was the mandatory acceptance test. It has been previously reported, that the cool down dynamics of a cavity across T{sub c} has a significant influence on the observed intrinsic quality factor Q{sub 0}, which is a measure of the losses on the inner cavity surface. A total number of 367 cool downs is used to analyze this correlation and we show that such a correlation is not observed during the European XFEL cavity production.

  17. FDG PET imaging of Ela1-myc mice reveals major biological differences between pancreatic acinar and ductal tumours

    Energy Technology Data Exchange (ETDEWEB)

    Abasolo, Ibane [Institut Municipal d' Investigacio Medica-Hospital del Mar, Parc de Recerca Biomedica de Barcelona, Barcelona (Spain); Universitat Pompeu Fabra, Parc de Recerca Biomedica de Barcelona, Departament de Ciencies Experimentals i de la Salut, Barcelona (Spain); Institut d' Alta Tecnologia - CRC, Parc de Recerca Biomedica de Barcelona, Barcelona (Spain); Pujal, Judit; Navarro, Pilar [Institut Municipal d' Investigacio Medica-Hospital del Mar, Parc de Recerca Biomedica de Barcelona, Barcelona (Spain); Rabanal, Rosa M.; Serafin, Anna [Universitat Autonoma de Barcelona, Departament de Medicina i Cirurgia Animals, Barcelona (Spain); Millan, Olga [Institut d' Alta Tecnologia - CRC, Parc de Recerca Biomedica de Barcelona, Barcelona (Spain); Real, Francisco X. [Institut Municipal d' Investigacio Medica-Hospital del Mar, Parc de Recerca Biomedica de Barcelona, Barcelona (Spain); Universitat Pompeu Fabra, Parc de Recerca Biomedica de Barcelona, Departament de Ciencies Experimentals i de la Salut, Barcelona (Spain); Programa de Patologia Molecular, Centro Nacional de Investigaciones Oncologicas, Madrid (Spain)

    2009-07-15

    The aim was to evaluate FDG PET imaging in Ela1-myc mice, a pancreatic cancer model resulting in the development of tumours with either acinar or mixed acinar-ductal phenotype. Transversal and longitudinal FDG PET studies were conducted; selected tissue samples were subjected to autoradiography and ex vivo organ counting. Glucose transporter and hexokinase mRNA expression was analysed by quantitative reverse transcription polymerase chain reaction (RT-PCR); Glut2 expression was analysed by immunohistochemistry. Transversal studies showed that mixed acinar-ductal tumours could be identified by FDG PET several weeks before they could be detected by hand palpation. Longitudinal studies revealed that ductal - but not acinar - tumours could be detected by FDG PET. Autoradiographic analysis confirmed that tumour areas with ductal differentiation incorporated more FDG than areas displaying acinar differentiation. Ex vivo radioactivity measurements showed that tumours of solely acinar phenotype incorporated more FDG than pancreata of non-transgenic littermates despite the fact that they did not yield positive PET images. To gain insight into the biological basis of the differential FDG uptake, glucose transporter and hexokinase transcript expression was studied in microdissected tumour areas enriched for acinar or ductal cells and validated using cell-specific markers. Glut2 and hexokinase I and II mRNA levels were up to 20-fold higher in ductal than in acinar tumours. Besides, Glut2 protein overexpression was found in ductal neoplastic cells but not in the surrounding stroma. In Ela1-myc mice, ductal tumours incorporate significantly more FDG than acinar tumours. This difference likely results from differential expression of Glut2 and hexokinases. These findings reveal previously unreported biological differences between acinar and ductal pancreatic tumours. (orig.)

  18. FDG PET imaging of Ela1-myc mice reveals major biological differences between pancreatic acinar and ductal tumours

    International Nuclear Information System (INIS)

    Abasolo, Ibane; Pujal, Judit; Navarro, Pilar; Rabanal, Rosa M.; Serafin, Anna; Millan, Olga; Real, Francisco X.

    2009-01-01

    The aim was to evaluate FDG PET imaging in Ela1-myc mice, a pancreatic cancer model resulting in the development of tumours with either acinar or mixed acinar-ductal phenotype. Transversal and longitudinal FDG PET studies were conducted; selected tissue samples were subjected to autoradiography and ex vivo organ counting. Glucose transporter and hexokinase mRNA expression was analysed by quantitative reverse transcription polymerase chain reaction (RT-PCR); Glut2 expression was analysed by immunohistochemistry. Transversal studies showed that mixed acinar-ductal tumours could be identified by FDG PET several weeks before they could be detected by hand palpation. Longitudinal studies revealed that ductal - but not acinar - tumours could be detected by FDG PET. Autoradiographic analysis confirmed that tumour areas with ductal differentiation incorporated more FDG than areas displaying acinar differentiation. Ex vivo radioactivity measurements showed that tumours of solely acinar phenotype incorporated more FDG than pancreata of non-transgenic littermates despite the fact that they did not yield positive PET images. To gain insight into the biological basis of the differential FDG uptake, glucose transporter and hexokinase transcript expression was studied in microdissected tumour areas enriched for acinar or ductal cells and validated using cell-specific markers. Glut2 and hexokinase I and II mRNA levels were up to 20-fold higher in ductal than in acinar tumours. Besides, Glut2 protein overexpression was found in ductal neoplastic cells but not in the surrounding stroma. In Ela1-myc mice, ductal tumours incorporate significantly more FDG than acinar tumours. This difference likely results from differential expression of Glut2 and hexokinases. These findings reveal previously unreported biological differences between acinar and ductal pancreatic tumours. (orig.)

  19. Estudo comparativo preliminar entre os alongamentos proprioceptivo e estático passivo em pacientes com seqüelas de hanseníase Preliminary comparative study between proprioceptive and passive static stretching in patients with leprosy sequelae

    OpenAIRE

    Augusto Floricel Diaz; Fabio Luiz Moro; Jussara Machado Binotto; Andersom Ricardo Fréz

    2008-01-01

    A proposta deste estudo foi comparar a aplicação de alongamento estático passivo e alongamento proprioceptivo no tratamento de seqüelas de hanseníase. Doze pacientes com essas seqüelas participaram da pesquisa, separados aleatoriamente em dois grupos: o grupo FNP, tratado com facilitação neuromuscular proprioceptiva, e o grupo AEP, com alongamento estático passivo. Ambos realizaram dez sessões de alongamentos, sendo submetidos à avaliação inicial e final nas quais foram aplicados o questionár...

  20. The European Social Survey and European research policy

    DEFF Research Database (Denmark)

    Kropp, Kristoffer

    2017-01-01

    This article analyses the history of the European Social Survey (ESS) and its relationship to changes in European research policy, using Bourdieu’s field-analytical approach. It argues that the success of the ESS relied on three interwoven processes that we can understand theoretically in terms...... of the establishment of homological structures and the formation of conjunctural alliances between the field of European social-scientific research and the field of European policy. The three interwoven processes that I depict are: first, the production of a European field of social research, connected to both...... European and national scientific institutions; second, the establishment of European Union (EU) institutions and organisations that were able to identify and link up with social researchers; and third, the formation of conjunctural alliances between the two fields (social science and EU research policy...

  1. Advanced scheme for high-yield laser driven nuclear reactions

    Czech Academy of Sciences Publication Activity Database

    Margarone, Daniele; Picciotto, A.; Velyhan, Andriy; Krása, Josef; Kucharik, M.; Mangione, A.; Szydlowsky, A.; Malinowska, A.; Bertuccio, G.; Shi, Y.; Crivellari, M.; Ullschmied, Jiří; Bellutti, P.; Korn, Georg

    2015-01-01

    Roč. 57, č. 1 (2015), s. 014030 ISSN 0741-3335 R&D Projects: GA MŠk ED1.1.00/02.0061; GA MŠk EE2.3.20.0279 EU Projects: European Commission(XE) 284464 - LASERLAB-EUROPE Grant - others:ELI Beamlines(XE) CZ.1.05/1.1.00/02.0061; LaserZdroj (OP VK 3)(XE) CZ.1.07/2.3.00/20.0279 Institutional research plan: CEZ:AV0Z2043910 Institutional support: RVO:68378271 ; RVO:61389021 Keywords : laser plasma * nuclear reaction * laser fusion Subject RIV: BL - Plasma and Gas Discharge Physics; BH - Optics, Masers, Lasers (UFP-V) Impact factor: 2.404, year: 2015

  2. The European project Hippo high-power photonics for satellite laser communications and on-board optical processing

    Science.gov (United States)

    Kehayas, E.; Stampoulidis, L.; Henderson, P.; Robertson, Andrew; Van Dijk, F.; Achouche, M.; Le Kernec, A.; Sotom, M.; Schuberts, F.; Brabant, T.

    2017-11-01

    Photonics is progressively transforming from a highly- focused technology applicable to digital communication networks into a pervasive "enabling" technology with diverse non-telecom applications. However, the centre of mass on the R&D level is still mostly driven by, and invested in, by stakeholders active in the telecoms domain. This is due to the high level of investments necessary that in turn require a large and established market for reaching break-even and generation of revenues. Photonics technology and more specifically, fibre-optic technology is moving into non-telecom business areas with great success in terms of markets captured and penetration rates. One example that cannot be overlooked is the application of fibre-optics to industrial applications, where double-digit growth rates are recorded with fibre lasers and amplifiers constantly gaining momentum. In this example, several years of R&D efforts in creating high-power amplification solutions and fibre-laser sources by the telecom sector, were piggy-backed into industrial applications and laser cutting/welding equipment that is now a strong R&D sector on its own and commercially now displacing some conventional free space laser cutting/welding.

  3. Laser deposition of sulfonated phthalocyanines for gas sensors

    Czech Academy of Sciences Publication Activity Database

    Fitl, Přemysl; Vrňata, M.; Kopecký, D.; Vlček, J.; Škodová, J.; Bulíř, Jiří; Novotný, Michal; Pokorný, Petr

    2014-01-01

    Roč. 302, MAY (2014), s. 37-41 ISSN 0169-4332. [European-Materials-Research-Society Symposium on Laser Material Interactions for Micro- and Nano- Applications /5./. Strasbourg, 27.05.2013-31.05.2013] R&D Projects: GA ČR(CZ) GAP108/11/1298 Institutional support: RVO:68378271 Keywords : Matrix Assisted Pulsed Laser Evaporation * substituted phthalocyanine s * gas sensors * impedance measurements Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.711, year: 2014

  4. Conditioning in laser skin resurfacing - betulin emulsion and skin recovery.

    Science.gov (United States)

    Metelmann, Hans-Robert; Podmelle, Fred; Waite, Peter D; Müller-Debus, Charlotte Friederieke; Hammes, Stefan; Funk, Wolfgang

    2013-04-01

    Laser skin resurfacing of the face by CO₂-laser ablation is causing superficial wounds that need rapid recovery to reduce the risk of infection, the risk of chronification and as a result the risk of unaesthetic scars. The question being addressed by this study is to demonstrate benefit of betulin emulsion skin care after CO₂-laser wounds. The outcome of this aesthetic comparison between betulin emulsion, moist wound dressing and gauze covering in promoting the recovery process in laser skin ablation is to demonstrate improved aesthetic benefit for the patient. Copyright © 2012 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  5. Past, Present and Future Aspects of Laser-Based Synchronization at FLASH

    OpenAIRE

    Schulz, Sebastian; Bousonville, Michael; Steffen, Bernd; Sydlo, Cezary; Zummack, Falco; Kozak, Tomasz; Predki, Pawel; Kuhl, Alexander; Czwalinna, Marie Kristin; Felber, Matthias; Heuer, Michael; Lamb, Thorsten; Mueller, Jost; Peier, Peter; Ruzin, Sergej

    2013-01-01

    Free-electron lasers, like FLASH and the upcoming European XFEL, are capable of producing XUV and X-ray pulses of a few femtoseconds duration. For time-resolved pump-probe experiments and the externally seeded operation mode it is crucial not only to stabilize the arrival time of the electron bunches, but also to achieve a synchronization accuracy of external lasers on the same timescale. This can only be realized with a laser-based synchronization infrastructure. At FLASH, a periodic femtose...

  6. Pickup design for high bandwidth bunch arrival-time monitors in free-electron lasers

    Energy Technology Data Exchange (ETDEWEB)

    Angelovski, Aleksandar; Penirschke, Andreas; Jakoby, Rolf [TU Darmstadt (Germany). Institut fuer Mikrowellentechnik und Photonik; Kuhl, Alexander; Schnepp, Sascha [TU Darmstadt (Germany). Graduate School of Computational Engineering; Bock, Marie Kristin; Bousonville, Michael; Schlarb, Holger [Deutsches Elektronen-Synchrotron DESY, Hamburg (Germany); Weiland, Thomas [TU Darmstadt (Germany). Institut fuer Theorie Elektromagnetischer Felder

    2012-07-01

    The increased demands for low bunch charge operation mode in the free-electron lasers (FELs) require an upgrade of the existing synchronization equipment. As a part of the laser-based synchronization system, the bunch arrival-time monitors (BAMs) should have a sub-10 femtosecond precision for high and low bunch charge operation. In order to fulfill the resolution demands for both modes of operation, the bandwidth of such a BAM should be increased up to a cutoff frequency of 40 GHz. In this talk, we present the design and the realization of high bandwidth cone-shaped pickup electrodes as a part of the BAM for the FEL in Hamburg (FLASH) and the European X-ray free-electron laser (European XFEL). The proposed pickup was simulated with CST STUDIO SUITE, and a non-hermetic model was built up for radio frequency (rf) measurements.

  7. The effect of a 1550 nm fractional erbium-glass laser in female pattern hair loss.

    Science.gov (United States)

    Lee, G-Y; Lee, S-J; Kim, W-S

    2011-12-01

    Female pattern hair loss (FPHL) is the most common cause of hair loss in women, and its prevalence increases with advancing age. Affected women may experience psychological distress and social withdrawal. A variety of laser and light sources have been tried for treatment of hair loss, and some success has been reported. The purpose of this study was to determine the efficacy and safety of a 1550 nm fractional erbium-glass laser in treatment of female pattern hair loss. Twenty eight ethnic South Korean patients with varying degrees of FPHL were enrolled in the study. Patients received ten treatments with a 1550 nm fractional Er:Glass Laser (Mosaic, Lutronic Co., Ltd, Seoul, South Korea) at 2-weeks intervals using the same parameters (5-10 mm tip, 6 mJ pulse energy, 800 spot/cm(2) density, static mode). Phototrichogram and global photographs were taken at baseline and at the end of laser treatment, and analysed for changes in hair density and hair shaft diameter. Global photographs underwent blinded review by three independent dermatologists using a 7-point scale. Patients also answered questionnaires assessing hair growth throughout the study. All adverse effects were reported during the study. Twenty seven patients completed a 5-month schedule of laser treatment. One patient was excluded during treatment due to occurrence of alopecia areata. At the initial visit, mean hair density was 100 ± 14/cm(2) , and mean hair thickness was 58 ± 12 μm. After 5 months of laser treatment, hair density showed a marked increase to 157 ± 28/cm(2) (P laser treatment; however, these resolved within 2 h. A 1550 nm fractional erbium-glass laser irradiation may be an effective and safe treatment option for women with female pattern hair loss. © 2011 The Authors. Journal of the European Academy of Dermatology and Venereology © 2011 European Academy of Dermatology and Venereology.

  8. The European Parliament and the European future of Albania

    Directory of Open Access Journals (Sweden)

    Skerdilajd Bajramaj

    2015-07-01

    Full Text Available On 06.24.2014 Albania was granted the status of candidate country. The foreign ministers of the 28 European Union member states decided unanimously to grant the candidate status for Albania. After receiving the status of “candidate country” for EU membership, the institutional relations with European international bodies are becoming stronger. One of these institutions, which during this time has increased its authority with Albania, is the European Parliament. In this paper will be analyzed the composition, competences and functioning of this particular institution, which is not only important for the future of the European Union and its Member States, but also for those who aim to join in. The study will be based on decisions made by this legislative body, as the only direct representative of the citizens of the European Union, and the impact they have on the performance and functioning of the Member States and the EU itself. In order to verify the validity of these claims, the analysis aims to assess the scope of the legislative function of the European Parliament post-Lisbon, examining its participation in the EU lawmaking both from the point of view of quantity and quality in over the past legislatures. Particular attention has been given to the examination of the changes that have taken place with the entry into force of the Lisbon Treaty, and the areas most affected. We will finally look at the work and contribution of the European Parliament, through the instruments at his disposal, on behalf of Albania’s progress towards full accession in the European Union.

  9. Physics and engineering of compact quantum dot-based lasers for biophotonics

    CERN Document Server

    Rafailov, Edik U

    2013-01-01

    Written by a team of European experts in the field, this book addresses the physics, the principles, the engineering methods, and the latest developments of efficient and compact ultrafast lasers based on novel quantum-dot structures and devices, as well as their applications in biophotonics. Recommended reading for physicists, engineers, students and lecturers in the fields of photonics, optics, laser physics, optoelectronics, and biophotonics.

  10. ELABELA-APJ axis protects from pressure overload heart failure and angiotensin II-induced cardiac damage.

    Science.gov (United States)

    Sato, Teruki; Sato, Chitose; Kadowaki, Ayumi; Watanabe, Hiroyuki; Ho, Lena; Ishida, Junji; Yamaguchi, Tomokazu; Kimura, Akinori; Fukamizu, Akiyoshi; Penninger, Josef M; Reversade, Bruno; Ito, Hiroshi; Imai, Yumiko; Kuba, Keiji

    2017-06-01

    Elabela/Toddler/Apela (ELA) has been identified as a novel endogenous peptide ligand for APJ/Apelin receptor/Aplnr. ELA plays a crucial role in early cardiac development of zebrafish as well as in maintenance of self-renewal of human embryonic stem cells. Apelin was the first identified APJ ligand, and exerts positive inotropic heart effects and regulates the renin-angiotensin system. The aim of this study was to investigate the biological effects of ELA in the cardiovascular system. Continuous infusion of ELA peptide significantly suppressed pressure overload-induced cardiac hypertrophy, fibrosis and impaired contractility in mice. ELA treatment reduced mRNA expression levels of genes associated with heart failure and fibrosis. The cardioprotective effects of ELA were diminished in APJ knockout mice, indicating that APJ is the key receptor for ELA in the adult heart. Mechanistically, ELA downregulated angiotensin-converting enzyme (ACE) expression in the stressed hearts, whereas it showed little effects on angiotensin-converting enzyme 2 (ACE2) expression, which are distinct from the effects of Apelin. FoxM1 transcription factor, which induces ACE expression in the stressed hearts, was downregulated by ELA but not by Apelin. ELA antagonized angiotensin II-induced hypertension, cardiac hypertrophy, and fibrosis in mice. The ELA-APJ axis protects from pressure overload-induced heart failure possibly via suppression of ACE expression and pathogenic angiotensin II signalling. The different effects of ELA and Apelin on the expression of ACE and ACE2 implicate fine-tuned mechanisms for a ligand-induced APJ activation and downstream signalling. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2017. For permissions please email: journals.permissions@oup.com.

  11. Spray generator of singlet oxygen for a chemical oxygen-iodine laser

    Czech Academy of Sciences Publication Activity Database

    Jirásek, Vít; Hrubý, Jan; Špalek, Otomar; Čenský, Miroslav; Kodymová, Jarmila

    2010-01-01

    Roč. 100, č. 4 (2010), s. 779-791 ISSN 0946-2171 Grant - others:European Office of Aerospace R&D(US) FA8655-09-1-3091 Institutional research plan: CEZ:AV0Z10100523; CEZ:AV0Z20760514 Keywords : spray generator of singlet oxygen * singlet oxygen * chemical oxygen-iodine laser Subject RIV: BH - Optics, Masers, Lasers Impact factor: 2.239, year: 2010

  12. Centre of the European gas market. The European Autumn Gas Conference

    International Nuclear Information System (INIS)

    Van Hasselt, F.; Van der Wal, W.; Ruinen, H.

    1998-01-01

    From the results of the 1997 European Autumn Gas Conference in Barcelona, Spain, it appears that the European gas industry is mainly focused on the liberalization of the European energy market. The main topic of the Conference was 'dealing with surplus'. A brief overview is given of the natural gas trade developments in the European countries. 1 ill., 1 tab. 2 ills

  13. Seqüelas das reações psiconeuróticas de guerra

    Directory of Open Access Journals (Sweden)

    Marcelo Blaya

    1961-12-01

    Full Text Available A importância da seleção do ponto de vista psiquiátrico torna-se óbvia ao examinar os dados do exército norte-americano referentes à segunda guerra mundial. Entretanto, apesar da cuidadosa seleção, todos os indivíduos recrutados são passíveis de sofrerem reações de combate. O reconhecimento precoce dessas reações e o seu tratamento intensivo permitem a recuperação da quase totalidade dêsses pacientes. As seqüelas das reações de combate representam a incapacidade do ego em ajustar-se à situação decorrente da ausência do estresse de combate e, especialmente, em readaptar-se à vida civil. Ao lado dêste fator, o de ganhos secundários associados tem uma grande importância na cronificação dessas reações. Em indivíduos com impulsos agressivos fortemente reprimidos, a situação bélica pode proporcionar uma gratificação intensa dêsses impulsos. Essa gratificação irá prejudicar o ajustamento dêsses indivíduos na rotina civil. Nos três casos apresentados êstes fatôres colaboraram para a manutenção de uma reação psiconeurótica crônica.

  14. Performance in the vertical test of the 832 nine-cell 1.3 GHz cavities for the European X-ray Free Electron Laser

    Science.gov (United States)

    Reschke, D.; Gubarev, V.; Schaffran, J.; Steder, L.; Walker, N.; Wenskat, M.; Monaco, L.

    2017-04-01

    The successful production and associated vertical testing of over 800 superconducting 1.3 GHz accelerating cavities for the European X-ray Free Electron Laser (XFEL) represents the culmination of over 20 years of superconducting radio-frequency R&D. The cavity production took place at two industrial vendors under the shared responsibility of INFN Milano-LASA and DESY. Average vertical testing rates at DESY exceeded 10 cavities per week, peaking at up to 15 cavities per week. The cavities sent for cryomodule assembly at Commissariat à l'énergie atomique (CEA) Saclay achieved an average maximum gradient of approximately 33 MV /m , reducing to ˜30 MV /m when the operational specifications on quality factor (Q) and field emission were included (the so-called usable gradient). Only 16% of the cavities required an additional surface retreatment to recover their low performance (usable gradient less than 20 MV /m ). These cavities were predominantly limited by excessive field emission for which a simple high pressure water rinse (HPR) was sufficient. Approximately 16% of the cavities also received an additional HPR, e.g. due to vacuum problems before or during the tests or other reasons, but these were not directly related to gradient performance. The in-depth statistical analyses presented in this report have revealed several features of the series produced cavities.

  15. The European Hematology Association Roadmap for European Hematology Research

    DEFF Research Database (Denmark)

    Engert, Andreas; Balduini, Carlo; Brand, Anneke

    2016-01-01

    The European Hematology Association (EHA) Roadmap for European Hematology Research highlights major achievements in diagnosis and treatment of blood disorders and identifies the greatest unmet clinical and scientific needs in those areas to enable better funded, more focused European hematology...... research. Initiated by the EHA, around 300 experts contributed to the consensus document, which will help European policy makers, research funders, research organizations, researchers, and patient groups make better informed decisions on hematology research. It also aims to raise public awareness...... of the burden of blood disorders on European society, which purely in economic terms is estimated at €23 billion per year, a level of cost that is not matched in current European hematology research funding. In recent decades, hematology research has improved our fundamental understanding of the biology...

  16. Eastern Dimension of the European Neighbourhood Policy: Europeanization Mutual Trap

    Directory of Open Access Journals (Sweden)

    V. A. Latkina

    2014-01-01

    Full Text Available The article analyses the Europeanization policy of the European Union towards the Eastern Partnership participant countries. Suffering from the lack of clear strategy and ultimate goal in the European Neighbourhood Policy the European Union enhances external democratization and its governance in post soviet states without immediate Union's membership perspective. Underestimation of common neighbourhood geopolitical duality in the context of growing rivalry between European (EU and Eurasian (Custom Union/Eurasian Economic Union integration gravitation centers presents the Eastern partners of the EU with a fierce dilemma of externally forced immediate geopolitical and civilizational choice while not all of them are well prepared to such a choice. The mutual Europeanization trap here to be studied both for the EU and its Eastern partners (involving Russia is a deficiency of regulating cooperation mechanism in the situation of European and Eurasian free trades zones overlapping. Vilnius Summit 2013 results test the "European aspirations" of the New Independent States and upset the ongoing process of the European Neighbourhood Policy in the context of growing economic interdependence in Wider Europe. Besides, the Ukrainian crisis escalation during 2014 as a new seat of tension provokes unbalance of the whole European security system and creates new dividing lines in Europe from Vancouver to Vladivostok.

  17. Dissociation of molecular iodine in RF discharge for oxygen-iodine laser

    Czech Academy of Sciences Publication Activity Database

    Jirásek, Vít; Schmiedberger, Josef; Čenský, Miroslav; Kodymová, Jarmila

    2012-01-01

    Roč. 66, č. 4 (2012), 1-6 ISSN 1434-6060 R&D Projects: GA ČR GA202/09/0310 Grant - others:European Office for Aerospace R&D(XE) FA8655-09-1-3092 Institutional research plan: CEZ:AV0Z10100523 Keywords : molecular iodine * RF discharge * dissociation * oxygen-iodine laser * COIL Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.513, year: 2012

  18. Plasma-based X-ray laser at 21 nm for multidisciplinary applications

    Czech Academy of Sciences Publication Activity Database

    Mocek, Tomáš; Rus, Bedřich; Kozlová, Michaela; Polan, Jiří; Homer, Pavel; Jakubczak, Krzysztof; Stupka, Michal; Snopek, David; Nejdl, Jaroslav; Edwards, M.H.; Whittaker, D.S.; Tallents, G. J.; Mistry, P.; Pert, G. J.; Booth, N.; Zhai, Z.; Fajardo, M.; Zeitoun, P.; Chalupský, Jaromír; Hájková, Věra; Juha, Libor

    2009-01-01

    Roč. 54, č. 2 (2009), s. 439-444 ISSN 1434-6060 R&D Projects: GA AV ČR KAN300100702; GA ČR GA202/05/2316; GA MŠk(CZ) LC528; GA ČR GC202/07/J008; GA MŠk(CZ) 7E08094; GA MŠk(CZ) 7E09092 EU Projects: European Commission(XE) 506350 - LASERLAB-EUROPE Institutional research plan: CEZ:AV0Z10100523 Keywords : x-ray laser * laser ablation * microstruturing * dense plasma probing Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.420, year: 2009

  19. Centrifugal spray generator of singlet oxygen for a chemical oxygen-iodine laser

    Czech Academy of Sciences Publication Activity Database

    Špalek, Otomar; Hrubý, Jan; Čenský, Miroslav; Jirásek, Vít; Kodymová, Jarmila

    2010-01-01

    Roč. 100, č. 4 (2010), s. 793-802 ISSN 0946-2171 Grant - others:European Office of Aerospace R&D(US) FA8655-09-1-3091 Institutional research plan: CEZ:AV0Z10100523; CEZ:AV0Z20760514 Keywords : centrifugal generator of singlet oxygen * chemical oxygen-iodine laser Subject RIV: BH - Optics, Masers, Lasers Impact factor: 2.239, year: 2010

  20. Characterization and optimization of an X-ray laser for the spectroscopy of Li-like heavy-ions

    Energy Technology Data Exchange (ETDEWEB)

    Zielbauer, B.

    2007-10-24

    Recent developments in the theory of plasma-based collisionally excited x-ray lasers (XRL) have shown an optimization potential based on the dependence of the absorption region of the pumping laser on its angle of incidence on the plasma. For the experimental proof of this idea, a number of diagnostic schemes were developed, tested, qualified and applied. A high-resolution imaging system, yielding the keV emission profile perpendicular to the target surface, provided positions of the hottest plasma regions, interesting for the benchmarking of plasma simulation codes. The implementation of a highly efficient spectrometer for the plasma emission made it possible to gain information about the abundance of the ionization states necessary for the laser action in the plasma. The intensity distribution and deflection angle of the pump laser beam could be imaged for single XRL shots, giving access to its refraction process within the plasma. During a European collaboration campaign at the Lund Laser Center, Sweden, the optimization of the pumping laser incidence angle resulted in a reduction of the required pumping energy for a Ni-like Mo XRL, which enabled the operation at a repetition rate of 10 Hz. Using the experiences gained there, the XRL performance at the PHELIX facility, GSI Darmstadt with respect to achievable repetition rate and at wavelengths below 20 nm was significantly improved, and also important information for the development towards multi-100 eV plasma XRLs was acquired. Due to the setup improvements achieved during the work for this thesis, the PHELIX XRL system now has reached a degree of reproducibility and versatility which is sufficient for demanding applications like the XRL spectroscopy of heavy ions. In addition, a European research campaign, aiming towards plasma XRLs approaching the water-window (wavelengths below 5 nm) was initiated. (orig.)

  1. Characterization and optimization of an X-ray laser for the spectroscopy of Li-like heavy-ions

    International Nuclear Information System (INIS)

    Zielbauer, B.

    2007-01-01

    Recent developments in the theory of plasma-based collisionally excited x-ray lasers (XRL) have shown an optimization potential based on the dependence of the absorption region of the pumping laser on its angle of incidence on the plasma. For the experimental proof of this idea, a number of diagnostic schemes were developed, tested, qualified and applied. A high-resolution imaging system, yielding the keV emission profile perpendicular to the target surface, provided positions of the hottest plasma regions, interesting for the benchmarking of plasma simulation codes. The implementation of a highly efficient spectrometer for the plasma emission made it possible to gain information about the abundance of the ionization states necessary for the laser action in the plasma. The intensity distribution and deflection angle of the pump laser beam could be imaged for single XRL shots, giving access to its refraction process within the plasma. During a European collaboration campaign at the Lund Laser Center, Sweden, the optimization of the pumping laser incidence angle resulted in a reduction of the required pumping energy for a Ni-like Mo XRL, which enabled the operation at a repetition rate of 10 Hz. Using the experiences gained there, the XRL performance at the PHELIX facility, GSI Darmstadt with respect to achievable repetition rate and at wavelengths below 20 nm was significantly improved, and also important information for the development towards multi-100 eV plasma XRLs was acquired. Due to the setup improvements achieved during the work for this thesis, the PHELIX XRL system now has reached a degree of reproducibility and versatility which is sufficient for demanding applications like the XRL spectroscopy of heavy ions. In addition, a European research campaign, aiming towards plasma XRLs approaching the water-window (wavelengths below 5 nm) was initiated. (orig.)

  2. Generation of atomic iodine via fluorine for chemical oxygen-iodine laser

    Czech Academy of Sciences Publication Activity Database

    Jirásek, Vít; Špalek, Otomar; Čenský, Miroslav; Picková, Irena; Kodymová, Jarmila; Jakubec, Ivo

    2007-01-01

    Roč. 334, - (2007), s. 167-174 ISSN 0301-0104 R&D Projects: GA ČR GA202/05/0359 Grant - others:USAF European Office for Research and Development(XE) FA 8655-05-M-4027 Institutional research plan: CEZ:AV0Z10100523; CEZ:AV0Z40320502 Keywords : atomic iodine * atomic fluorine * chemical oxygen-iodine laser Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.805, year: 2007

  3. Performance in the vertical test of the 832 nine-cell 1.3 GHz cavities for the European X-ray Free Electron Laser

    Directory of Open Access Journals (Sweden)

    D. Reschke

    2017-04-01

    Full Text Available The successful production and associated vertical testing of over 800 superconducting 1.3 GHz accelerating cavities for the European X-ray Free Electron Laser (XFEL represents the culmination of over 20 years of superconducting radio-frequency R&D. The cavity production took place at two industrial vendors under the shared responsibility of INFN Milano–LASA and DESY. Average vertical testing rates at DESY exceeded 10 cavities per week, peaking at up to 15 cavities per week. The cavities sent for cryomodule assembly at Commissariat à l’énergie atomique (CEA Saclay achieved an average maximum gradient of approximately 33  MV/m, reducing to ∼30  MV/m when the operational specifications on quality factor (Q and field emission were included (the so-called usable gradient. Only 16% of the cavities required an additional surface retreatment to recover their low performance (usable gradient less than 20  MV/m. These cavities were predominantly limited by excessive field emission for which a simple high pressure water rinse (HPR was sufficient. Approximately 16% of the cavities also received an additional HPR, e.g. due to vacuum problems before or during the tests or other reasons, but these were not directly related to gradient performance. The in-depth statistical analyses presented in this report have revealed several features of the series produced cavities.

  4. Low temperature high-mobility InZnO thin-film transistors fabricated by excimer laser annealing

    NARCIS (Netherlands)

    Fujii, M.; Ishikawa, Y.; Ishihara, R.; Van der Cingel, J.; Mofrad, M.R.T.; Horita, M.; Uraoka, Y.

    2013-01-01

    In this study, we successfully achieved a relatively high field-effect mobility of 37.7?cm2/Vs in an InZnO thin-film transistor (TFT) fabricated by excimer layer annealing (ELA). The ELA process allowed us to fabricate such a high-performance InZnO TFT at the substrate temperature less than 50?°C

  5. European citizenship and the constitutionalisation of the European Union

    NARCIS (Netherlands)

    van Eijken, Hanneke|info:eu-repo/dai/nl/314133992

    2014-01-01

    The concept of citizenship in relatively new legal order of the European Union has its own meaning and dynamics compared to national citizenship. One of the important questions regarding this transnational form of citizenship is how to place this European citizenship in a constitutional context in

  6. ‘Sometimes They Are Fun and Sometimes They Are Not’: Concept Mapping with English Language Acquisition (ELA and Gifted/Talented (GT Elementary Students Learning Science and Sustainability

    Directory of Open Access Journals (Sweden)

    Katrina Marzetta

    2018-01-01

    Full Text Available This study presents an ‘education for sustainability’ curricular model which promotes science learning in an elementary classroom through equity pedagogy. A total of 25 fourth-grade students from an urban, public school in Denver, Colorado participated in this mixed-methods study where concept maps were used as a tool for describing and assessing students’ understanding of ecosystem interactions. Concept maps provide a more holistic, systems-based assessment of science learning in a sustainability curriculum. The concept maps were scored and analyzed using SPSS to investigate potential differences in learning gains of English Language Acquisition (ELA and Gifted/Talented (GT students. Interviews were conducted after the concept maps were administered, then transcribed and inductively coded to generate themes related to science learning. Interviews also encouraged students to explain their drawings and provided a more accurate interpretation of the concept maps. Findings revealed the difference between pre- and post-concept map scores for ELA and GT learners were not statistically significant. Students also demonstrated an increased knowledge of ecosystem interactions during interviews. Concept maps, as part of an education for sustainability curriculum, can promote equity by providing diverse learners with different—yet equally valid—outlets to express their scientific knowledge.

  7. The Europeanization of Welfare - The Domestic Impact of Intra-European Social Security

    DEFF Research Database (Denmark)

    Martinsen, Dorte Sindbjerg

    2005-01-01

    Studies of Europeanization have demonstrated that the impact of European integration differs between Member States and across policies. Although Europeanization research has been expanded and clarified in recent years, we still know relatively little about the factors mediating the national...... responses to integration. It is argued that these intervening variables are decisive for how common European demands are mediated nationally and are likely to explain impact variations referring to the same cause....

  8. Filamented plasmas in laser ablation of solids

    Czech Academy of Sciences Publication Activity Database

    Davies, J.R.; Fajardo, M.; Kozlová, Michaela; Mocek, Tomáš; Polan, Jiří; Rus, Bedřich

    2009-01-01

    Roč. 51, č. 3 (2009), 035013/1-035013/12 ISSN 0741-3335 EU Projects: European Commission(XE) 12843 - TUIXS Grant - others:FCT(PT) POCI/FIS/59563/2004 Institutional research plan: CEZ:AV0Z10100523 Keywords : magneto-hydrodynamic modelling * perturbation * filaments * x-ray * plasma Subject RIV: BH - Optics, Masers, Lasers Impact factor: 2.409, year: 2009

  9. Eigenmode compendium of the third harmonic module of the European X-ray Free Electron Laser

    Science.gov (United States)

    Flisgen, Thomas; Heller, Johann; Galek, Tomasz; Shi, Liangliang; Joshi, Nirav; Baboi, Nicoleta; Jones, Roger M.; van Rienen, Ursula

    2017-04-01

    Chains of superconducting radio-frequency resonators are key components of modern particle accelerators such as the European XFEL, which is currently under construction in the north of Germany. In addition to the accelerating mode of the resonators, their beam excited higher order modes are of special interest, because they can harm the beam quality. In contrast to the accelerating mode, these modes are in general not confined within single resonators of the cavity string. For instance, eigenmodes can be localized between adjacent cavities or can be distributed along the entire chain of cavities. Therefore, the full chain has to be considered for a reasonable investigation of its resonant spectra. Accounting for such complex structures is computationally challenging and is therefore often avoided. In this article, the challenge is faced by using the so-called state-space concatenation approach, which is a combination of domain decomposition and model-order reduction. The technique allows for a reduction of the number of degrees of freedom by a factor of ≈ 1.471 ×10-4 . The method is employed to generate a compendium of eigenmodes in the chain of third harmonic cavities for the European XFEL. The results are discussed in detail and are compared with experimental measurements. The compendium serves as a reference for experiments (inter alia for diagnostics based on higher order modes) at the third harmonic cavity string of the European XFEL, it allows for qualitative understanding of resonant effects appearing in chains of cavities, and it is meant to be a proof of principle of the state-space concatenation approach to handle very long and complex radio-frequency structures. To the authors' knowledge, it is the first time that a modal compendium of a structure with the given complexity is generated. The article presents geometrical details of the chain, defines quantities relevant to superconducting radio-frequency cavities, and describes the employed

  10. Eigenmode compendium of the third harmonic module of the European X-ray Free Electron Laser

    Directory of Open Access Journals (Sweden)

    Thomas Flisgen

    2017-04-01

    Full Text Available Chains of superconducting radio-frequency resonators are key components of modern particle accelerators such as the European XFEL, which is currently under construction in the north of Germany. In addition to the accelerating mode of the resonators, their beam excited higher order modes are of special interest, because they can harm the beam quality. In contrast to the accelerating mode, these modes are in general not confined within single resonators of the cavity string. For instance, eigenmodes can be localized between adjacent cavities or can be distributed along the entire chain of cavities. Therefore, the full chain has to be considered for a reasonable investigation of its resonant spectra. Accounting for such complex structures is computationally challenging and is therefore often avoided. In this article, the challenge is faced by using the so-called state-space concatenation approach, which is a combination of domain decomposition and model-order reduction. The technique allows for a reduction of the number of degrees of freedom by a factor of ≈ 1.471×10^{-4}. The method is employed to generate a compendium of eigenmodes in the chain of third harmonic cavities for the European XFEL. The results are discussed in detail and are compared with experimental measurements. The compendium serves as a reference for experiments (inter alia for diagnostics based on higher order modes at the third harmonic cavity string of the European XFEL, it allows for qualitative understanding of resonant effects appearing in chains of cavities, and it is meant to be a proof of principle of the state-space concatenation approach to handle very long and complex radio-frequency structures. To the authors’ knowledge, it is the first time that a modal compendium of a structure with the given complexity is generated. The article presents geometrical details of the chain, defines quantities relevant to superconducting radio-frequency cavities, and describes

  11. Comparison of two picosecond lasers to a nanosecond laser for treating tattoos: a prospective randomized study on 49 patients.

    Science.gov (United States)

    Lorgeou, A; Perrillat, Y; Gral, N; Lagrange, S; Lacour, J-P; Passeron, T

    2018-02-01

    Q-switched nanosecond lasers demonstrated their efficacy in treating most types of tattoos, but complete disappearance is not always achieved even after performing numerous laser sessions. Picosecond lasers are supposed to be more efficient in clearing tattoos than nanosecond lasers, but prospective comparative data remain limited. To compare on different types of tattoos the efficacy of a nanosecond laser with two types of picosecond lasers. We conducted a prospective randomized study performed from December 2014 to June 2016 on adult patients with all types of tattoos. The tattoos were divided into two halves of equal size. After randomization, half of the tattoo was treated with a picosecond laser and the other half with a nanosecond laser. The evaluation was performed on standardized pictures performed before treatment and 2 months after the last session, by two physicians, not involved in the treatment, blinded on the type of treatments received. The main end point was a clearance above 75% of the tattoos. A total of 49 patients were included. Professional tattoos represented 85.7%, permanent make-up 8.2% and non-professional tattoo 6.1%. The majority were black or blue and 10.2% were polychromatic. No patient was lost during follow-up. A reduction of 75% or more of the colour intensity was obtained for 33% of the tattoos treated with the picosecond lasers compared to 14% with the nanosecond laser (P = 0.008). An improvement superior to 75% was obtained in 34% monochromic black or blue tattoos with the picosecond lasers compared to 9% for the nanosecond laser. Only one of the five polychromic tattoos achieved more than 75% of improvement with the two types of laser. Our results show a statistically significant superiority of the picosecond lasers compared to the nanosecond laser for tattoo clearance. However, they do not show better efficacy for polychromic tattoos and the difference in terms of side-effects was also minimal with a tendency of picosecond

  12. Improving the profile of the European tourist destinations through the European tourism indicators system

    Directory of Open Access Journals (Sweden)

    Laura CISMARU

    2015-06-01

    Full Text Available Within the most recent European Policy for Tourism, the competitiveness of the European tourism industry is directly linked to the image of Europe and to its perception, as a collection of sustainable and high-quality tourist destinations. In such context, improving the profile of the European tourist destinations has become a main target. During the last years, the European Commission focused on the sustainable development of tourist destinations. Several projects were developed, the most recent one introducing a practical tool - the European Tourism Indicators System (ETIS for the sustainable development of destinations. The present paper advances the idea that such tool can be successfully used in order to achieve the goal of improving the profile of the European tourist destinations.

  13. Preliminary detection of explosive standard components with Laser Raman Technique

    International Nuclear Information System (INIS)

    Botti, S.; Ciardi, R.

    2008-01-01

    Presently, our section is leader of the ISOTREX project (Integrated System for On-line TRace EXplosives detection in solid, liquid and vapour state), funded in the frame of the PASR 2006 action (Preparatory Action on the enhancement of the European industrial potential in the field of Security Research Preparatory Action) of the 6. EC framework. ISOTREX project will exploit the capabilities of different laser techniques as LIBS (Laser Induced Breakdown Spectroscopy), LPA (Laser Photo Acustic) and CRDS (Cavity Ring Down Spectroscopy) to monitor explosive traces. In this frame, we extended our investigation also to the laser induced Raman effect spectroscopy, in order to investigate its capabilities and possible future integration. We analysed explosive samples in bulk solid phase, diluted liquid phase and as evaporated films over suitable substrate. In the following, we present the main results obtained, outlining preliminary conclusions [it

  14. kW-class picosecond thin-disc prepulse laser Perla for efficient EUV generation

    Czech Academy of Sciences Publication Activity Database

    Endo, Akira; Smrž, Martin; Mužík, Jiří; Novák, Ondřej; Chyla, Michal; Mocek, Tomáš

    2017-01-01

    Roč. 16, č. 4 (2017), s. 1-6, č. článku 041011. ISSN 1932-5150 R&D Projects: GA MŠk LO1602; GA ČR GA16-12960S; GA MŠk LM2015086 EU Projects: European Commission(XE) 739573 - HiLASE CoE Grant - others:OP VVV - HiLASE-CoE(XE) CZ.02.1.01/0.0/0.0/15_006/0000674 Institutional support: RVO:68378271 Keywords : EUV source * laser produced plasma * FEL * prepulse * thin-disc laser Subject RIV: BH - Optics, Masers, Laser s OBOR OECD: Optics (including laser optics and quantum optics) Impact factor: 1.350, year: 2016

  15. The european passive plant (EPP) design: compliance with the european utilities requirements (EUR)

    International Nuclear Information System (INIS)

    Noviello, L.; Oyarzabal, M.

    1996-01-01

    Back 1986, most of the European firms have participated to the American program called the Advanced Light Water Reactors (ALWR) including the development of the Utilities Requirements as well as four projects as for instance AP600. Later, in the year 1990, seven European firms have begun to develop the European Utilities Requirements. This development is justified by the fact that the lessons learned by the nuclear power plants designs programs of the years 1980 can be incorporated and the European specific conditions can be taken into consideration. Thus, in 1994, eight European firms - Westinghouse and their industrial partners - have decided to launch a multiphase program in order to check the AP600 compliance with the European Utilities Requirements (EUR) and to develop the required alterations. Today, the phase I of the EPP (European Passive Plant) program has been completed. In this phase, the main important objectives have been reached. (O.M.)

  16. Funcionamiento hidrológico de un humedal ribereño, el Masegar, en el conjunto de los humedales de La Mancha Húmeda de la cuenca alta del rió Cigüela

    Directory of Open Access Journals (Sweden)

    Llamas, M. R.

    1995-12-01

    Full Text Available Fifteen years ago «La Mancha Húmeda» was deelared Biosphere Reserve by UNESCO, at the request of the Spanish Government. According to a recent deelaration by UNESCO in 1995, such title could be lost if the degradation processes of the wetlands of «La Mancha Húmeda» continue. «La Mancha Húmeda» was formed by a hundred of small lakes or wetlands that in area totalled about 200-300 km2 and they were distributed over an area of about 25.000 km2. These are different types of wetlands (saltwater and freshwater, permanent and ephimeral, riparian and closed basins, etc.. It is estimated that the actual surface of all the wetlands is about 20-30% of that occupied 20 or 30 years ago. The most famous degradation case is that of the «Tablas de Daimiel National Park» that has shrinked fram an area of about 15-20km2 to less than 1 km2 This article presents the general situation of the riverine wetlands of the Cigüela river and the results of the hydrological functioning of a wetland of modest dimensions, less than 1 km2, El Masegar. It is a riparian wetland located in the Cigüela River basin which has been severely affected by man actions. El Masegar can be considered as an artificial wetland. From an ecological point of view, this wetland seems to have been functioning in a proper way until 1988, when the so called «Plan de Regeneración Hídrica del Parque Nacional de las Tablas de Daimiel» began. This Plan has not regenerated the Natural Park but has degradated or destroyed the riparian wetlands that existed along the Cigüela River valley which is about ISO km long. The surface of these wetlands all together was larger than that of Tablas de Daimiel National Park. The study shows that it could be feasible to restore or maintain most of the riparian wetlands of the «La Mancha Húmeda» without a great economic investment and without social conflicts with the farmers.En 1981, a petición del Gobierno español, la

  17. Lasers for the SILVA laser isotope separation process

    International Nuclear Information System (INIS)

    Lapierre, Y.

    1997-01-01

    The main principles of the laser isotope separation process for the production of enriched uranium at lower cost, are reviewed and the corresponding optimal laser characteristics are described. The development of the SILVA laser isotope separation process involved researches in the various domains of pump lasers, dye lasers, laser and optics systems and two test facilities for the feasibility studies which are expected for 1997

  18. Opportunities for two-color experiments at the SASE3 undulator line of the European XFEL

    Energy Technology Data Exchange (ETDEWEB)

    Geloni, Gianluca; Mazza, Tommaso; Meyer, Michael; Serkez, Svitozar [European XFEL GmbH, Hamburg (Germany); Kocharyan, Vitali; Saldin, Evgeni [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2017-06-15

    X-ray Free Electron Lasers (XFELs) have been proven to generate short and powerful radiation pulses allowing for a wide class of novel experiments. If an XFEL facility supports the generation of two X-ray pulses with different wavelengths and controllable delay, the range of possible experiments is broadened even further to include X-ray-pump/X-ray-probe applications. In this work we discuss the possibility of applying a simple and cost-effective method for producing two-color pulses at the SASE3 soft X-ray beamline of the European XFEL. The technique is based on the installation of a magnetic chicane in the baseline undulator and can be accomplished in several steps. We discuss the scientific interest of this upgrade for the Small Quantum Systems (SQS) instrument, in connection with the high-repetition rate of the European XFEL, and we provide start-to-end simulations up to the radiation focus on the sample, proving the feasibility of our concept.

  19. New light for science: European X-ray Free Electron Laser

    International Nuclear Information System (INIS)

    Sobierajski, R.; Lawniczak-Jablonska, K.

    2006-01-01

    The execution of the X-Ray Free Electron Laser (XFEL) project begins January 2007. The unique combination of the radiation wavelength, pulse duration and peak brightness provided by XFEL will enable to study processes which occur in both atomic scales - time and space. It will create new scientific opportunities in physics, chemistry, biology and material sciences. In the paper the principles of the XFEL radiation generation, technical design and main radiation parameters are described. They are followed by short description of the project organization. (author) [pl

  20. Combined raman/laser-induced breakdown spectrometer: space and non-space applications

    NARCIS (Netherlands)

    Sandtke, M.; Laan, E.C.; Ahlers, B.

    2010-01-01

    TNO has developed the combination of two spectroscopic analysis methods in one instrument. Raman spectroscopy and Laser-induced Breakdown Spectroscopy (LIBS) were brought together for an instrument to be flown on the ExoMars mission from the European Space Agency (ESA) to investigate the Martian

  1. Continuous-wave and passively Q-switched cryogenic Yb: KLu(WO.sub.4./sub.).sub.2./sub. laser

    Czech Academy of Sciences Publication Activity Database

    Navrátil, Petr; Jambunathan, Venkatesan; Paul David, Samuel; Yue, Fangxin; Serres, J.M.; Mateos, X.; Aguilo, M.; Diaz, F.; Griebner, U.; Petrov, V.; Lucianetti, Antonio; Mocek, Tomáš

    2017-01-01

    Roč. 25, č. 21 (2017), s. 25886-25893 ISSN 1094-4087 R&D Projects: GA MŠk LO1602; GA MŠk LM2015086 EU Projects: European Commission(XE) 739573 - HiLASE CoE Grant - others:OP VVV - HiLASE-CoE(XE) CZ.02.1.01/0.0/0.0/15_006/0000674 Institutional support: RVO:68378271 Keywords : diode-pumped lasers * laser materials Subject RIV: BH - Optics, Masers, Lasers OBOR OECD: Optics (including laser optics and quantum optics) Impact factor: 3.307, year: 2016

  2. Commissioning for the European XFEL facility

    Science.gov (United States)

    Nölle, D.

    2017-06-01

    The European XFEL is a 4th generation light source based on the Self Amplified Spontaneous Emission (SASE) FreeElectron-Laser concept. It is currently being commissioned in North- Germany. The core installation is a 17.5 GeV superconducting accelerator driving 3 SASE lines with photon energies from 1 to beyond 20 keV range with a maximum of 27.000 pulses per second. The international facility is organized as a limited liability company with shareholders from the contributing countries. DESY has taken over the leadership of the accelerator construction consortium, and will be in charge of the operation of the accelerator complex. The facility was set up with contributions from the 11 shareholder countries, either being hardware systems and/or staff or cash contributions. The construction is almost complete, and the commissioning phase has started by the end of 2015. This contribution will report the status of the accelerator complex with emphasis on the commissioning of the accelerator and an outlook to the commissioning of the SASE 1 FEL line.

  3. Europeanization and social movement mobilization during the European sovereign debt crisis

    DEFF Research Database (Denmark)

    Bourne, Angela; Chatzopoulou, Sevasti

    2015-01-01

    The article addresses Europeanization of social movements in the context of the European Sovereign Debt Crisis. Europeanization occurs when movements collaborate, or make horizontal communicative linkages with movements in other countries, contest authorities beyond the state, frame issues...

  4. Ion channels involved in cell volume regulation: effects on migration, proliferation, and programmed cell death in non adherent EAT cells and adherent ELA cells.

    Science.gov (United States)

    Hoffmann, Else Kay

    2011-01-01

    This mini review outlines studies of cell volume regulation in two closely related mammalian cell lines: nonadherent Ehrlich ascites tumour cells (EATC) and adherent Ehrlich Lettre ascites (ELA) cells. Focus is on the regulatory volume decrease (RVD) that occurs after cell swelling, the volume regulatory ion channels involved, and the mechanisms (cellular signalling pathways) that regulate these channels. Finally, I shall also briefly review current investigations in these two cell lines that focuses on how changes in cell volume can regulate cell functions such as cell migration, proliferation, and programmed cell death. Copyright © 2011 S. Karger AG, Basel.

  5. Europeanization by it is tools: the case of European transnational projects

    NARCIS (Netherlands)

    Sanchez Salgado, R.

    2010-01-01

    In the understanding of Europeanization, specific tools of governance matter. Europeanization through flexible tools of governance enables strategic uses by domestic actors, and does not necessaritly preclude policy transfer or transformation. As long as they favour participation, European

  6. The European standard series in 9 European countries, 2002/2003 - First results of the European Surveillance System on Contact Allergies

    NARCIS (Netherlands)

    Uter, W; Hegewald, J; Aberer, W; Ayala, F; Bircher, AJ; Brasch, J; Coenraads, PJ; Schuttelaar, Marielouise; Elsner, P; Fartasch, M; Mahler, V.; Fortina, AB; Frosch, PJ; Fuchs, T; Johansen, JD; Menne, T; Jolanki, R; Krecisz, B; Kiec-Swierczynska, M; Larese, F; Orton, D; Peserico, A; Rantanen, T; Schnuch, A

    Since January 2001, the European Surveillance System on Contact Allergies (ESSCA), supported by European Union funding (contract QLK4-CT-2001-00343), has started to collect patch-test data. This comprises a standardized clinical history and the patch-test results using the European standard series,

  7. [The Early Years of Military Laser Research and Technology in the Federal Republic of Germany During the Cold War].

    Science.gov (United States)

    Albrecht, Helmuth

    2014-01-01

    The invention of the laser in 1960 and the innovation process of laser technology during the following years coincided with the dramatic increase of the East-West-conflict during the 1960s - the peak of the so-called Cold War after the erection of the Berlin Wall in 1961. The predictable features of the new device, not only for experimental sciences, but also for technical and military applications, led instantly to a laser hype all over the world. Military funding and research played a major part in this development. Especially in the United States military laser research and development played an important role in the formation of Cold War sciences. The European allies followed this example to a certain degree, but their specific national environments led to quite different solutions and results. This article describes and analyzes the special features and background of this development for the Federal Republic of Germany in the area of conflict between science, politics and industry from 1960 to the early 1970s.

  8. Multi-wavelength copper vapour lasers for novel materials processing application

    International Nuclear Information System (INIS)

    Knowles, M.; Foster-Turner, R.; Kearsley, A.; Evans, J.

    1995-01-01

    The copper vapour laser (CVL) is a high average power, short pulse laser with a multi-kilohertz pulse repetition rate. The CVL laser lines (511 nm and 578 nm) combined with the good beam quality and high peak power available from these lasers allow it to operate in a unique parameter space. Consequently, it has demonstrated many unique and advantageous machining characteristics. We have also demonstrated efficient conversion of CVL radiation to other wavelengths using non-linear frequency conversion, dye lasers and Ti:AL 2 O 3 . Output powers of up to 4 W at 255 nm have been achieved by frequency doubling. The frequency doubled CVL is inherently narrow linewidth and frequency locked making it a suitable source for UV photolithography. Slope efficiencies in excess of 25 % have been achieved with CVL pumped Ti:Al 2 O 3 and dye lasers. These laser extend the wavelengths options into the red and infrared regions of the spectrum. The near diffraction limited beams from these tunable lasers can be efficiently frequency doubled into the blue and near UV. The wide range of wavelength options from the CVL enable a wide variety of materials processing and material interactions to be explored. A European consortium for Copper Laser Applications in Manufacture and Production (CLAMP) has been set up under the EUREKA scheme to coordinate the commercial and technical expertise currently available in Europe. (author)

  9. THE MANIFESTATION OF THE EUROPEAN CENTRAL BANK’S LEGAL PERSONALITY AT NATIONAL, EUROPEAN AND INTERNATIONAL LEVEL

    Directory of Open Access Journals (Sweden)

    MONICA ŞAGUNA

    2012-05-01

    Full Text Available The European Central Bank is one of the world’ s most important central banks, responsible for the monetary policy covering the 17 member States of the Eurozone. Established by the European Union in 1998, it was given the exclusive right to authorize the issue of banknotes within the European Union. The European Central Bank has legal personality under public international law. As article 282, paragraph 3 of the Treaty on functioning of the European Union and article 9, paragraph 1 of the Statute of the European System of Central Banks and of the European Central Bank states, the European Central Bank and the National Central Banks enjoy their own legal personality. The European Central Bank, given its important role in the economic integration, is the single institution of the European Union which has legal personality. This is a premise for it to fulfill its objectives. In this framework, the purpose of my paper is to analyze the effects of the European Central Bank’s legal personality from a complete perspective: at national, European and international level. Therefore the objectives of my study are: an introspection in the concept of legal personality, the identification of the reason why it was entrusted to a single institution of the European Union and a detailed analyze of the effects of the European Central Bank’ s legal personality.

  10. European Criminal Law a! er the Lisbon Treaty, or Europeanization of European law, under the co-responsibility of the Member States

    Directory of Open Access Journals (Sweden)

    Arif Riza

    2016-11-01

    Full Text Available Same as EU Law, that presents a new area of law and that it is still in progress, the EU Criminal Law is developing. The development of EU criminal law, of course, is dictated by the development of European Law itself, or the EU itself. Depending on it, the EU will be a supranational structure, or will undergo changes and become a Federal State, or another unified form. Taking into consideration the importance of this area of law, which is created for cooperation among states to combat organized crime, and especially terrorism, we can have a Criminal Code European and a European code of Criminal Procedure certainly in the near future, namely, a codification of European criminal field. This paper aims to discuss the development of European criminal law, until the Treaty of Lisbon.

  11. The European Space Agency and the European Union: The Next Step on the Road to the Stars

    Directory of Open Access Journals (Sweden)

    Thomas Christian Hoerber

    2009-11-01

    Full Text Available Given the outlook, the main questions considered in this article are whether a European position on a genuine common space policy is developing. If so, why is this happening now?; and what kind of potentials do these developments hold for the European integration process as a whole? This article will approach these questions through an analysis of past European collaboration in space affairs. It will describe the recent process of closer involvement between European Space Agency (ESA and the European Union (EU. It will identify the motivations underlying this process. It will also try to gauge the strategic potential of an intensification of the coordination of national space efforts in ESA and the involvement of the EU. In the conclusion, the ever closer relationship between the EU and ESA will be considered against the larger picture of European politics and the ongoing process of European integration

  12. Shot-to-shot reproducibility in the emission of fast highly charged metal ions from a laser ion source

    Czech Academy of Sciences Publication Activity Database

    Krása, Josef; Velyhan, Andriy; Margarone, Daniele; Krouský, Eduard; Láska, Leoš; Jungwirth, Karel; Rohlena, Karel; Ullschmied, Jiří; Parys, P.; Ryc, L.; Wolowski, J.

    2012-01-01

    Roč. 83, č. 2 (2012), , "02B302-1"-"02B302-3" ISSN 0034-6748 R&D Projects: GA ČR(CZ) GAP205/11/1165; GA MŠk(CZ) 7E09092; GA MŠk(CZ) LC528 EU Projects: European Commission(XE) 228334 - LASERLAB-EUROPE Institutional research plan: CEZ:AV0Z10100523; CEZ:AV0Z20430508 Keywords : ion sources * palladium * plasma sources * gold * plasma production by laser Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.602, year: 2012

  13. The European Photovoltaic Technology Platform

    International Nuclear Information System (INIS)

    Nowak, S.; Aulich, H.; Bal, J.L.; Dimmler, B.; Garnier, A.; Jongerden, G.; Luther, J.; Luque, A.; Milner, A.; Nelson, D.; Pataki, I.; Pearsall, N.; Perezagua, E.; Pietruszko, S.; Rehak, J.; Schellekens, E.; Shanker, A.; Silvestrini, G.; Sinke, W.; Willemsen, H.

    2006-05-01

    The European Photovoltaic Technology Platform is one of the European Technology Platforms, a new instrument proposed by the European Commission. European Technology Platforms (ETPs) are a mechanism to bring together all interested stakeholders to develop a long-term vision to address a specific challenge, create a coherent, dynamic strategy to achieve that vision and steer the implementation of an action plan to deliver agreed programmes of activities and optimise the benefits for all parties. The European Photovoltaic Technology Platform has recently been established to define, support and accompany the implementation of a coherent and comprehensive strategic plan for photovoltaics. The platform will mobilise all stakeholders sharing a long-term European vision for PV, helping to ensure that Europe maintains and improves its industrial position. The platform will realise a European Strategic Research Agenda for PV for the next decade(s). Guided by a Steering Committee of 20 high level decision-makers representing all relevant European PV Stakeholders, the European PV Technology Platform comprises 4 Working Groups dealing with the subjects policy and instruments; market deployment; science, technology and applications as well as developing countries and is supported by a secretariat

  14. The European Small Claims Procedure: Striking the Balance between Simplicity and Fairness in European Litigation

    NARCIS (Netherlands)

    X.E. Kramer (Xandra)

    2008-01-01

    textabstractThis article deals with the European Small Claims Procedure (ESCP). After the European Order for Payment procedure, this is the second autonomous European procedure that has been established. Attention is paid to the background of harmonization of small claims proceedings in the European

  15. The European Gonococcal Antimicrobial Surveillance Programme (Euro-GASP)--a sentinel approach in the European Union (EU)/European Economic Area (EEA).

    Science.gov (United States)

    Spiteri, Gianfranco; Cole, Michelle; Unemo, Magnus; Hoffmann, Steen; Ison, Catherine; van de Laar, Marita

    2013-12-01

    Antimicrobial resistance in Neisseria gonorrhoeae is monitored in the European Union/European Economic Area through the European Gonococcal Antimicrobial Surveillance Programme (Euro-GASP) coordinated by the European Centre for Disease Prevention and Control. Euro-GASP includes a sentinel surveillance programme which aims to detect in a timely manner changes in resistance patterns and inform treatment guidelines. The programme aims to test a representative number of isolates from each European Union/European Economic Area member state per year for a range of therapeutically relevant antimicrobials through a biannual hybrid centralised/decentralised system. Testing is supported by an External Quality Assurance programme and a laboratory training programme. Participation in the programme has increased to 21 countries in 2012. Euro-GASP has been able to detect the rapid spread of isolates with decreased susceptibility to cefixime across Europe in 2010 and 2011. Results from the programme have informed changes in European treatment guidelines for gonorrhoea and led to the development of the 'Response plan to control and manage the threat of multidrug resistant gonorrhoea in Europe'. Future challenges for Euro-GASP include supporting countries to participate in Euro-GASP through decentralised testing, improving timeliness and epidemiological data quality, and increasing participation from Eastern Europe.

  16. The constitutional momentum of European contract law (II): The DCFR and the European constitutional order

    OpenAIRE

    Mak, C.

    2009-01-01

    This paper analyses the potential impact of the recently published Draft Common Frame of Reference for European contract law (DCFR) on the European constitutional process. Looking at the combination of characteristics of codification and aspects of constitutionalism reflected in the DCFR, it is submitted that the further harmonisation of European contract law may contribute to the definition of the European constitutional order both on the institutional level (regarding the forms in which Eur...

  17. Improved 206Pb/238U microprobe geochronology by the monitoring of a trace-element-related matrix effect; SHRIMP, ID-TIMS, ELA-ICP-MS and oxygen isotope documentation for a series of zircon standards

    Science.gov (United States)

    Black, L.P.; Kamo, S.L.; Allen, C.M.; Davis, D.W.; Aleinikoff, J.N.; Valley, J.W.; Mundil, R.; Campbell, I.H.; Korsch, R.J.; Williams, I.S.; Foudoulis, C.

    2004-01-01

    Precise isotope dilution-thermal ionisation mass spectrometry (ID-TIMS) documentation is given for two new Palaeozoic zircon standards (TEMORA 2 and R33). These data, in combination with results for previously documented standards (AS3, SL13, QGNG and TEMORA 1), provide the basis for a detailed investigation of inconsistencies in 206Pb/238U ages measured by microprobe. Although these ages are normally consistent between any two standards, their relative age offsets are often different from those established by ID-TIMS. This is true for both sensitive high-resolution ion-microprobe (SHRIMP) and excimer laser ablation-inductively coupled plasma-mass spectrometry (ELA-ICP-MS) dating, although the age offsets are in the opposite sense for the two techniques. Various factors have been investigated for possible correlations with age bias, in an attempt to resolve why the accuracy of the method is worse than the indicated precision. Crystallographic orientation, position on the grain-mount and oxygen isotopic composition are unrelated to the bias. There are, however, striking correlations between the 206Pb/238U age offsets and P, Sm and, most particularly, Nd abundances in the zircons. Although these are not believed to be the primary cause of this apparent matrix effect, they indicate that ionisation of 206Pb/238U is influenced, at least in part, by a combination of trace elements. Nd is sufficiently representative of the controlling trace elements that it provides a quantitative means of correcting for the microprobe age bias. This approach has the potential to reduce age biases associated with different techniques, different instrumentation and different standards within and between laboratories. Crown Copyright ?? 2004 Published by Elsevier B.V. All rights reserved.

  18. The Lisbon Treaty and the role of the European Parliament in the European Atomic Energy Community

    International Nuclear Information System (INIS)

    Thomas, S.

    2008-01-01

    In June 2007, the European Council commissioned an intergovernmental conference to draft a 'treaty of reform' of the European Union. The wording of the treaty was signed by the heads of state and government of the member countries on December 13, 2007. The ongoing process of ratification in the 27 EU member countries is to be completed before the next elections to the European Parliament in June 2009. The treaty is now referred to as 'Lisbon Treaty'. The Lisbon Treaty (Treaty Amending the Treaty about the European Union and the Treaty Establishing the European Community) does not replace the European Treaties currently in force, but merely amends them. Also the 'Treaty Establishing the European Atomic Energy Community (EURATOM)' is amended in this way. On the basis of the contributions about 'The German Presidency Program of the Council Working Group on Nuclear Issues - an Interim Report' (W. Sandtner and S. Thomas) and 'Euratom Treaty and Intergovernmental Conference' (S. Thomas), current links to the Euratom Treaty with potential amendments are presented and commented upon. (orig.)

  19. Inertial displacement of a domain wall excited by ultra-short circularly polarized laser pulses

    Czech Academy of Sciences Publication Activity Database

    Janda, Tomáš; Roy, P.E.; Otxoa, R.M.; Šobáň, Zbyněk; Ramsay, A.; Irvine, A.C.; Trojánek, F.; Surynek, M.; Campion, R. P.; Gallagher, B. L.; Němec, P.; Jungwirth, Tomáš; Wunderlich, Joerg

    2017-01-01

    Roč. 8, May (2017), 1-7, č. článku 15226. ISSN 2041-1723 R&D Projects: GA MŠk LM2015087; GA ČR GB14-37427G EU Projects: European Commission(XE) 610115 - SC2 Institutional support: RVO:68378271 Keywords : spintronics * domain walls Subject RIV: BH - Optics, Masers, Lasers OBOR OECD: Optics (including laser optics and quantum optics) Impact factor: 12.124, year: 2016

  20. Polish and European SST Assets: the Solaris-Panoptes Global Network of Robotic Telescopes and the Borowiec Satellite Laser Ranging System

    Science.gov (United States)

    Konacki, M.; Lejba, P.; Sybilski, P.; Pawłaszek, R.; Kozłowski, S.; Suchodolski, T.; Litwicki, M.; Kolb, U.; Burwitz, V.; Baader, J.; Groot, P.; Bloemen, S.; Ratajczak, M.; Helminiak, K.; Borek, R.; Chodosiewicz, P.

    2016-09-01

    We present the assets of the Nicolaus Copernicus Astronomical Center, Space Research Center (both of the Polish Academy of Sciences), two Polish companies Sybilla Technologies, Cillium Engineering and a non-profit research foundation Baltic Institute of Technology. These assets are enhanced by telescopes belonging to The Open University (UK), the Max Planck Institute for Extraterrestrial Physics and in the future the Radboud University. They consist of the Solaris-Panoptes global network of optical robotic telescopes and the satellite laser ranging station in Borowiec, Poland. These assets will contribute to the Polish and European Space Surveillance and Tracking (SST) program. The Solaris component is composed of four autonomous observatories in the Southern Hemisphere. Solaris nodes are located at the South African Astronomical Observatory (Solaris-1 and Solaris-2), Siding Spring Observatory, Australia (Solaris-3) and Complejo Astronomico El Leoncito, Argentina (Solaris-4). They are equipped with 0.5-m telescopes on ASA DDM-160 direct drive mounts, Andor iKon-L cameras and housed in 3.5-m Baader Planetarium (BP) clamshell domes. The Panoptes component is a network of telescopes operated by software from Sybilla Technologies. It currently consists of 4 telescopes at three locations, all on GM4000 mounts. One 0.36-m (Panoptes-COAST, STL- 1001E camera, 3.5 BP clamshell dome) and one 0.43-m (Panoptes-PIRATE, FLI 16803 camera, 4.5-m BP clamshell dome, with planned exchange to 0.63-m) telescope are located at the Teide Observatory (Tenerfie, Canary Islands), one 0.6-m (Panoptes-COG, SBIG STX 16803 camera, 4.5-m BP clamshell dome) telescope in Garching, Germany and one 0.5-m (Panoptes-MAM, FLI 16803 camera, 4.5-m BP slit dome) in Mammendorf, Germany. Panoptes-COAST and Panoptes-PIRATE are owned by The Open University (UK). Panoptes-COG is owned by the Max Planck Institute

  1. Fiber laser master oscillators for optical synchronization systems

    International Nuclear Information System (INIS)

    Winter, A.

    2008-04-01

    New X-ray free electron lasers (e.g. the European XFEL) require a new generation of synchronization system to achieve a stability of the FEL pulse, such that pump-probe experiments can fully utilize the ultra-short pulse duration (50 fs). An optical synchronization system has been developed based on the distribution of sub-ps optical pulses in length-stabilized fiber links. The synchronization information is contained in the precise repetition frequency of the optical pulses. In this thesis, the design and characterization of the laser serving as laser master oscillator is presented. An erbium-doped mode-locked fiber laser was chosen. Amplitude and phase noise were measured and record-low values of 0.03 % and 10 fs for the frequency range of 1 kHz to the Nyquist frequency were obtained. Furthermore, an initial proof-of-principle experiment for the optical synchronization system was performed in an accelerator environment. In this experiment, the fiber laser wase phase-locked to a microwave reference oscillator and a 500 meter long fiber link was stabilized to 12 fs rms over a range of 0.1 Hz to 20 kHz. RF signals were obtained from a photodetector without significant degradation at the end of the link. Furthermore, the laser master oscillator for FLASH was designed and is presently in fabrication and the initial infrastructure for the optical synchronization system was setup. (orig.)

  2. Fiber laser master oscillators for optical synchronization systems

    Energy Technology Data Exchange (ETDEWEB)

    Winter, A.

    2008-04-15

    New X-ray free electron lasers (e.g. the European XFEL) require a new generation of synchronization system to achieve a stability of the FEL pulse, such that pump-probe experiments can fully utilize the ultra-short pulse duration (50 fs). An optical synchronization system has been developed based on the distribution of sub-ps optical pulses in length-stabilized fiber links. The synchronization information is contained in the precise repetition frequency of the optical pulses. In this thesis, the design and characterization of the laser serving as laser master oscillator is presented. An erbium-doped mode-locked fiber laser was chosen. Amplitude and phase noise were measured and record-low values of 0.03 % and 10 fs for the frequency range of 1 kHz to the Nyquist frequency were obtained. Furthermore, an initial proof-of-principle experiment for the optical synchronization system was performed in an accelerator environment. In this experiment, the fiber laser wase phase-locked to a microwave reference oscillator and a 500 meter long fiber link was stabilized to 12 fs rms over a range of 0.1 Hz to 20 kHz. RF signals were obtained from a photodetector without significant degradation at the end of the link. Furthermore, the laser master oscillator for FLASH was designed and is presently in fabrication and the initial infrastructure for the optical synchronization system was setup. (orig.)

  3. The Newest Laser Processing

    International Nuclear Information System (INIS)

    Lee, Baek Yeon

    2007-01-01

    This book mentions laser processing with laser principle, laser history, laser beam property, laser kinds, foundation of laser processing such as laser oscillation, characteristic of laser processing, laser for processing and its characteristic, processing of laser hole including conception of processing of laser hole and each material, and hole processing of metal material, cut of laser, reality of cut, laser welding, laser surface hardening, application case of special processing and safety measurement of laser.

  4. European Utility Requirements: European nuclear energy

    International Nuclear Information System (INIS)

    Komsi, M.; Patrakka, E.

    1997-01-01

    The work procedure and the content of the European Utility Requirements (EUR) concerning the future LWRs is described in the article. European Utility Requirements, produced by utilities in a number of European countries, is a document specifying the details relating to engineered safety, operating performance, reliability and economics of the reactors to be built by manufacturers for the European market

  5. Microchip Yb:CaLnAlO.sub.4./sub. lasers with up to 91% slope efficiency

    Czech Academy of Sciences Publication Activity Database

    Loiko, P.; Serres, J.M.; Mateos, X.; Xu, X.; Xu, J.; Jambunathan, Venkatesan; Navrátil, Petr; Lucianetti, Antonio; Mocek, Tomáš; Zhang, X.; Griebner, U.; Petrov, V.; Aguilo, M.; Diaz, F.; Major, A.

    2017-01-01

    Roč. 42, č. 13 (2017), s. 2431-2434 ISSN 0146-9592 R&D Projects: GA MŠk LO1602; GA MŠk LM2015086 EU Projects: European Commission(XE) 657424 - QuantumLaP Institutional support: RVO:68378271 Keywords : microchip Subject RIV: BH - Optics, Masers, Laser s OBOR OECD: Optics (including laser optics and quantum optics) Impact factor: 3.416, year: 2016

  6. An otolith microchemistry study of possible relationships between the origins of leptocephali of European eels in the Sargasso Sea and the continental destinations and relative migration success of glass eels

    DEFF Research Database (Denmark)

    Martin, J.; Daverat, F.; Pécheyran, C.

    2010-01-01

    's core region of Anguilla anguilla leptocephali caught in the Sargasso Sea in 2007 with those of glass eels and elvers sampled in European estuaries during 2006, 2008 and 2009. Using laser ablation inductively coupled plasma mass spectrometry, the same annular ablation trajectory along the first feeding...

  7. Can the European Central Bank Create a European identity?

    DEFF Research Database (Denmark)

    Ravn Sørensen, Anders

    2014-01-01

    In what ways do central banks construct community, and how may the European Central Bank (ECB) contribute to a supranational European identity? In this paper I seek to answer these two questions by developing a conceptual framework for the ways that central banks construct national identities and...

  8. High current, high energy proton beams accelerated by a sub-nanosecond laser

    Czech Academy of Sciences Publication Activity Database

    Margarone, Daniele; Krása, Josef; Picciotto, A.; Torrisi, L.; Láska, Leoš; Velyhan, Andriy; Prokůpek, Jan; Ryc, L.; Parys, P.; Ullschmied, Jiří; Rus, Bedřich

    2011-01-01

    Roč. 653, č. 1 (2011), s. 159-163 ISSN 0168-9002 R&D Projects: GA ČR(CZ) GAP205/11/1165; GA AV ČR IAA100100715; GA MŠk(CZ) 7E09092 EU Projects: European Commission(XE) 212105 - ELI-PP Institutional research plan: CEZ:AV0Z10100523; CEZ:AV0Z20430508 Keywords : laser-acceleration * proton beam * high ion current * time -of-flight * proton energy distribution Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.207, year: 2011

  9. Are we Europeans?: Correlates and the relation between national and European identity

    Directory of Open Access Journals (Sweden)

    Mihić Vladimir

    2009-01-01

    Full Text Available Researches of the correlates of the national identity are plentiful both in Serbian and foreign literature. However, in the past decade or so, a new social identity starts to make its way into the researches of the social psychologists-European identity or the sense of belonging to the Europe and the Europeans. This paper deals with the relation between national and European identity, as well as with the correlates of both of these, or one of them. The sample consisted of 451 subjects, all residents of major cities in the Vojvodina region (northern Serbia, divided into several categories-ethnicity (Serbs and Hungarians, educational level (primary and secondary school or University degree, gender and age. Several scales have been used: Cinnirela's national and European identity scale, Collective self-esteem scale, scale measuring attitudes towards the European integration-STEIN and Social dominance orientation scale-SDO. The questionnaire with the demographic characteristics has also been the part of the instrument. The research has been conducted in 2005 and 2006 in the all of the major Vojvodinian cities. Results show the relation between national and European identity is foggy, but general conclusion is that we can observe them as independent identities. The correlates of the national identity were ethnicity, high social dominance orientation, high collective self-esteem and negative attitude towards the European integrations. Correlates of the European identity were fewer: ethnicity, positive attitude towards the European integration and low social dominance orientation.

  10. The European Location Framework - from National to European

    Science.gov (United States)

    Pauknerova, E.; Sidlichovsky, P.; Urbanas, S.; Med, M.

    2016-06-01

    The European Location Framework (ELF) means a technical infrastructure which will deliver authoritative, interoperable geospatial reference data from all over Europe for analysing and understanding information connected to places and features. The ELF has been developed and set up through the ELF Project, which has been realized by a consortium of partners (public, private and academic organisations) since March 2013. Their number increased from thirty to forty in the year 2016, together with a project extension from 36 to 44 months. The project is co-funded by the European Commission's Competitiveness and Innovation Framework Programme (CIP) and will end in October 2016. In broad terms, the ELF Project will deliver a unique gateway to the authoritative reference geospatial information for Europe (harmonised pan-European maps, geographic and land information) sourced from the National Mapping and Cadastral Authorities (NMCAs) around Europe and including transparent licensing. This will be provided as an online ELF web service that will deliver an up-to-date topographic base map and also as view & download services for access to the ELF datasets. To develop and build up the ELF, NMCAs are accompanied and collaborate with several research & academia institutes, a standardisation body, system integrators, software developers and application providers. The harmonisation is in progress developing and triggering a number of geo-tools like edge-matching, generalisation, transformation and others. ELF will provide also some centralised tools like Geo Locator for searching location based on geographical names, addresses and administrative units, and GeoProduct Finder for discovering the available web-services and licensing them. ELF combines national reference geo-information through the ELF platform. ELF web services will be offered to users and application developers through open source (OSKARI) and proprietary (ArcGIS Online) cloud platforms. Recently, 29 NMCAs plus the

  11. Experimental investigations on the influence of the photocathode laser pulse parameters on the electron bunch quality in an RF-photoelectron source

    Energy Technology Data Exchange (ETDEWEB)

    Haenel, Marc

    2010-07-15

    Free Electron Lasers based on the SASE principle like the European XFEL require electron bunches having peak currents of several kiloamperes as well as very low transverse emittance. While high peak currents can be generated using longitudinal bunch compression techniques, the transverse emittance must have values as low as 1mmmrad already at the source. The development of electron sources fulfilling these demanding specifications is the goal of the Photo Injector Test Facility (PITZ) in DESY, Zeuthen site. The key component of a photoinjector is the electron gun cavity where the electrons bunches are generated and immediately accelerated. The extraction of the electrons is based on the photoelectric effect of the cathode which requires a laser system having special capabilities. In the first part of the thesis, measurements are presented which were performed to investigate whether the laser and the laser transport system fulfill these requirements. The second part of the thesis is dedicated to simulations as well as experimental studies on the impact of the temporal and spatial parameters of the laser pulses on the electron bunch quality. This influence is possible because the response time of the Cs{sub 2}Te photocathode is short compared to the laser pulse duration. Based on these investigations, suggestions for improvements are given and tolerances for the laser pulse properties are defined. (orig.)

  12. Experimental investigations on the influence of the photocathode laser pulse parameters on the electron bunch quality in an RF-photoelectron source

    International Nuclear Information System (INIS)

    Haenel, Marc

    2010-06-01

    Free Electron Lasers based on the SASE principle like the European XFEL require electron bunches having peak currents of several kiloamperes as well as very low transverse emittance. While high peak currents can be generated using longitudinal bunch compression techniques, the transverse emittance must have values as low as 1mmmrad already at the source. The development of electron sources fulfilling these demanding specifications is the goal of the Photo Injector Test Facility (PITZ) in DESY, Zeuthen site. The key component of a photoinjector is the electron gun cavity where the electrons bunches are generated and immediately accelerated. The extraction of the electrons is based on the photoelectric effect of the cathode which requires a laser system having special capabilities. In the first part of the thesis, measurements are presented which were performed to investigate whether the laser and the laser transport system fulfill these requirements. The second part of the thesis is dedicated to simulations as well as experimental studies on the impact of the temporal and spatial parameters of the laser pulses on the electron bunch quality. This influence is possible because the response time of the Cs 2 Te photocathode is short compared to the laser pulse duration. Based on these investigations, suggestions for improvements are given and tolerances for the laser pulse properties are defined. (orig.)

  13. The european hematology association roadmap for european hematology research : A consensus document

    NARCIS (Netherlands)

    A. Engert (Andreas); C.L. Balduini (Carlo); A. Brand (Anneke); B. Coiffier (Bertrand); C. Cordonnier (Charlotte); H. Döhner (Hartmut); De Wit, T.D. (Thom Duyvené); Eichinger, S. (Sabine); W.E. Fibbe (Willem); Green, T. (Tony); De Haas, F. (Fleur); A. Iolascon (Achille); T. Jaffredo (Thierry); F. Rodeghiero (Francesco); G. Salles (Gilles); J.J. Schuringa (Jan Jacob)

    2016-01-01

    textabstractThe European Hematology Association (EHA) Roadmap for European Hematology Research highlights major achievements in diagnosis and treatment of blood disorders and identifies the greatest unmet clinical and scientific needs in those areas to enable better funded, more focused European

  14. The European Hematology Association Roadmap for European Hematology Research : A consensus document

    NARCIS (Netherlands)

    Engert, Andreas; Balduini, Carlo; Brand, Anneke; Coiffier, Bertrand; Cordonnier, Catherine; Döhner, Hartmut; de Wit, Thom Duyvené; Eichinger, Sabine; Fibbe, Willem; Green, Tony; de Haas, Fleur; Iolascon, Achille; Jaffredo, Thierry; Rodeghiero, Francesco; Salles, Gilles; Schuringa, Jan Jacob

    The European Hematology Association (EHA) Roadmap for European Hematology Research highlights major achievements in diagnosis and treatment of blood disorders and identifies the greatest unmet clinical and scientific needs in those areas to enable better funded, more focused European hematology

  15. Wavelength dependence of picosecond laser-induced periodic surface structures on copper

    Czech Academy of Sciences Publication Activity Database

    Maragkaki, S.; Derrien, Thibault; Levy, Yoann; Bulgakova, Nadezhda M.; Ostendorf, A.; Gurevich, E.L.

    2017-01-01

    Roč. 417, Sep (2017), s. 88-92 ISSN 0169-4332 R&D Projects: GA MŠk LO1602; GA MŠk EF15_003/0000445; GA MŠk LM2015086 EU Projects: European Commission(XE) 657424 - QuantumLaP Grant - others:OP VVV - BIATRI(XE) CZ.02.1.01/0.0/0.0/15_003/0000445 Institutional support: RVO:68378271 Keywords : irradiation * ablation * silicon * pulses * damage Subject RIV: BH - Optics, Masers, Lasers OBOR OECD: Optics (including laser optics and quantum optics) Impact factor: 3.387, year: 2016

  16. European Identity and European Citizenship: the Case of Missing Polis?

    Czech Academy of Sciences Publication Activity Database

    Šejvl, Michal

    2008-01-01

    Roč. 2, č. 2 (2008), s. 49-56 ISSN 1789-1035 Institutional research plan: CEZ:AV0Z70680506 Keywords : the European integration * law of citizenship * European identity Subject RIV: AG - Legal Sciences

  17. High energy, single frequency, tunable laser source operating in burst mode for space based lidar applications

    Science.gov (United States)

    Cosentino, Alberto; Mondello, Alessia; Sapia, Adalberto; D'Ottavi, Alessandro; Brotini, Mauro; Nava, Enzo; Stucchi, Emanuele; Trespidi, Franco; Mariottini, Cristina; Wazen, Paul; Falletto, Nicolas; Fruit, Michel

    2017-11-01

    This paper describes the laser transmitter assembly used in the ALADIN instrument currently in C/D development phase for the ESA ADM-AEOLUS mission (EADS Astrium as prime contractor for the satellite and the instrument). The Laser Transmitter Assembly (TXA), based on a diode pumped tripled Nd:YAG laser, is used to generate tunable laser pulses of 150 mJ at a nominal wavelength of 355 nm. This laser is operated in burst mode, with a pulse repetition cycle of 100 Hz. The TXA is composed of the following units: a diodepumped CW Nd:YAG Laser named Reference Laser Head (RLH), used to inject a diode-pumped, Q-switched, amplified and frequency tripled Nd:YAG Laser working in the third harmonic referred as Power Laser Head (PLH) and a Transmitter Laser Electronics (TLE) containing all the control and power electronics needed for PLH and RLH operation. The TXA is made by an European consortium under the leadership of Galileo Avionica (It), and including CESI (It), Quantel (Fr), TESAT (Ge) and Thales (Fr).

  18. Medical research and multidisciplinary applications with laser-accelerated beams: the ELIMED netwotk at ELI-Beamlines

    Science.gov (United States)

    Tramontana, A.; Anzalone, A.; Candiano, G.; Carpinelli, M.; Cirrone, G. A. P.; Cuttone, G.; Korn, G.; Licciardello, T.; Maggiore, M.; Manti, L.; Margarone, D.; Musumarra, A.; Perozziello, F.; Pisciotta, P.; Raffaele, L.; Romano, F.; Romano, F. P.; Stancampiano, C.; Schillaci, F.; Scuderi, V.; Torrisi, L.; Tudisco, S.

    2014-04-01

    Laser accelerated proton beams represent nowadays an attractive alternative to the conventional ones and they have been proposed in different research fields. In particular, the interest has been focused in the possibility of replacing conventional accelerating machines with laser-based accelerators in order to develop a new concept of hadrontherapy facilities, which could result more compact and less expensive. With this background the ELIMED (ELIMED: ELI-Beamlines MEDical applications) research project has been launched by LNS-INFN researchers (Laboratori Nazionali del Sud-Istituto Nazionale di Fisica Nucleare, Catania, IT) and ASCR-FZU researchers (Academy of Sciences of the Czech Republic-Fyzikální ústar, Prague, Cz), within the pan-European ELI-Beamlines facility framework. Its main purposes are the demonstration of future applications in hadrontherapy of optically accelerated protons and the realization of a laser-accelerated ion transport beamline for multidisciplinary applications. Several challenges, starting from laser-target interaction and beam transport development, up to dosimetric and radiobiological issues, need to be overcome in order to reach the final goals. The design and the realization of a preliminary beam handling and dosimetric system and of an advanced spectrometer for high energy (multi-MeV) laser-accelerated ion beams will be shortly presented in this work.

  19. Measurement and stability of the pointing of the BepiColombo Laser Altimeter under thermal load

    Science.gov (United States)

    Gouman, J.; Beck, T.; Affolter, M.; Thomas, N.; Geissbühler, U.; Péteut, A.; Bandy, T.; Servonet, A.; Piazza, D.; Seiferlin, K.

    2014-04-01

    The first European laser altimeter, designed for interplanetary flight, BELA, (on BepiColombo mission to Mercury) will be launched in July 2016. This abstract describes the setup used to characterize the angular movements of BELA during the simulation of the environment that the instrument will encounter when orbiting Mercury. Tests performed using the Engineering Qualification Model (EQM) show that the setup is accurate enough to characterize angular movements of the instrument components with an accuracy of ≈ 10 μrad.

  20. Laser active thermography for non-destructive testing

    International Nuclear Information System (INIS)

    Semerok, A.; Grisolia, C.; Fomichev, S.V.; Thro, P.Y.

    2013-01-01

    Thermography methods have found their applications in different fields of human activity. The non-destructive feature of these methods along with the additional advantage by automated remote control and tests of nuclear installations without personnel attendance in the contaminated zone are of particular interest. Laser active pyrometry and laser lock-in thermography for in situ non-destructive characterization of micrometric layers on graphite substrates from European tokamaks were under extensive experimental and theoretical studies in CEA (France). The studies were aimed to obtain layer characterization with cross-checking the layer thermal contact coefficients determined by active laser pyrometry and lock-in thermography. The experimental installation comprised a Nd-YAG pulsed repetition rate laser (1 Hz - 10 kHz repetition rate frequency, homogeneous spot) and a home-made pyrometer system based on two pyrometers for the temperature measurements in 500 - 2600 K range. For both methods, the layer characterization was provided by the best fit of the experimental results and simulations. The layer thermal contact coefficients determined by both methods were quite comparable. Though there was no gain in the measurements accuracy, lock-in measurements have proved their advantage as being much more rapid. The obtained experimental and theoretical results are presented. Some practical applications and possible improvements of the methods are discussed. (authors)

  1. Laser active thermography for non-destructive testing

    Science.gov (United States)

    Semerok, A.; Grisolia, C.; Fomichev, S. V.; Thro, P.-Y.

    2013-11-01

    Thermography methods have found their applications in different fields of human activity. The non-destructive feature of these methods along with the additional advantage by automated remote control and tests of nuclear installations without personnel attendance in the contaminated zone are of particular interest. Laser active pyrometry and laser lock-in thermography for in situ non-destructive characterization of micrometric layers on graphite substrates from European tokamaks were under extensive experimental and theoretical studies in CEA (France). The studies were aimed to obtain layer characterization with cross-checking the layer thermal contact coefficients determined by active laser pyrometry and lock-in thermography. The experimental installation comprised a Nd-YAG pulsed repetition rate laser (1 Hz - 10 kHz repetition rate frequency, homogeneous spot) and a home-made pyrometer system based on two pyrometers for the temperature measurements in 500 - 2600 K range. For both methods, the layer characterization was provided by the best fit of the experimental results and simulations. The layer thermal contact coefficients determined by both methods were quite comparable. Though there was no gain in the measurements accuracy, lock-in measurements have proved their advantage as being much more rapid. The obtained experimental and theoretical results are presented. Some practical applications and possible improvements of the methods are discussed.

  2. Comparison of Immediate and 2-Year Outcomes between Excimer Laser-Assisted Angioplasty with Spot Stent and Primary Stenting in Intermediate to Long Femoropopliteal Disease

    Directory of Open Access Journals (Sweden)

    Tien-Yu Wu

    2013-01-01

    Full Text Available Background. To compare the clinical outcomes between excimer laser-assisted angioplasty (ELA with spot stent (group A and primary stenting (group B in intermediate to long femoropopliteal disease. Methods. Outcomes of 105 patients totaling 119 legs treated with two different strategies were analyzed retrospectively in a prospectively maintained database. Results. Baseline characteristics were similar in both groups. Better angiographic results and lesser increase of serum C-reactive protein levels (0.60 ± 0.72 versus 2.98 ± 0.97 mg/dL, P<0.001 after the intervention were obtained in Group B. Group A had inferior 1-year outcomes due to higher rate of binary restenosis (67% versus 32%, P=0.001 and lower rate of primary patency (40% versus 58%, P=0.039. Rates of amputation-free survival, target vessel revascularization, assisted primary patency, and stent fracture at 24 months were similar in both groups (80% versus 82%, P=0.979, 65% versus 45%, P=0.11, 78% versus 80%, P=0.75 and 6.3% versus 6.8%, P=0.71, resp.. Conclusion. Greater vascular inflammation after ELA with spot stent resulted in earlier restenosis and inferior 1-year clinical outcomes than primary stenting. This benefit was lost in the primary stenting group at 2 years due to late catch-up restenosis. Active surveillance with prompt intervention was required to maintain the vessel patency.

  3. The European Natural Gas Market

    NARCIS (Netherlands)

    Correlje, A.F.

    The European Union started the introduction of competition in the European market for natural gas. Today, mid-2016, the process of restructuring is still going on. In parallel, important changes in geopolitical, environmental and technological determinants can be observed in the European and global

  4. Environment in the European Union 1995

    DEFF Research Database (Denmark)

    The update to the 1992 report on the state of the environment in the European Union requested by the European Commission......The update to the 1992 report on the state of the environment in the European Union requested by the European Commission...

  5. The Europeanization of Politics: Building a Terminology for European Studies

    Directory of Open Access Journals (Sweden)

    Damir Grubiša

    2005-01-01

    Full Text Available The article discusses the problem of Europeanisation, one of the key concepts developed within the European Studies in the last ten years or so, since the adoption and entry into force of the Maastricht Treaty. The fi rst part of the article deals with various models of Europeanisation in a context extending beyond the conceptual framework of the European Union, within which the phenomenon of Europeanisation arises. Therefore, the author attempts to develop a typology of broader approaches to the identifi cation of the phenomenon and process of Europeanisation, which includes six conceptions thereof: the fi rst approach is a geographical-political one, where Europeanisation is seen as a change in outer borders of Europe, from the reduction of Europe to the countries of Western Europe and Central Europe, to the extension of the concept of Europe to marginal countries; the second approach links the concept of Europeanisation with the development of political institutions on the European level. The third defi nition identifi es Europeanisation as an export of various forms of political organisation, a process which proceeds from the experience of European colonisation to the diff usion of European values as a role model for other continents; the fourth model of Europeanisation is the identifi cation with the project of European unifi cation, i. e. the process of integration which ends up in a federal, unifi ed Europe; the fi fth subtype is the penetration of national systems of governance by the European model of multilevel governance, which becomes manifest in the adaptation, convergence and harmonisation of the political and legal systems of member nations. The author elaborates on this classic typology by adding the sixth approach, which he calls “retrospective Europeanisation”. It involves Europeanisation as identifi cation with traditional European values that existed before EC and EU, primarily with the preintegration traditional

  6. PREFACE: Plasma Physics by Laser and Applications 2013 Conference (PPLA2013)

    Science.gov (United States)

    Nassisi, V.; Giulietti, D.; Torrisi, L.; Delle Side, D.

    2014-04-01

    The ''Plasma Physics by Laser and Applications'' Conference (PPLA 2013) is a biennial meeting in which the National teams involved in Laser-Plasma Interaction at high intensities communicate their late results comparing with the colleagues from the most important European Laser Facilities. The sixth appointment has been organized in Lecce, Italy, from 2 to 4 October 2013 at the Rector Palace of the University of Salento. Surprising results obtained by laser-matter interaction at high intensities, as well as, non-equilibrium plasma generation, laser-plasma acceleration and related secondary sources, diagnostic methodologies and applications based on lasers and plasma pulses have transferred to researchers the enthusiasm to perform experiments ad maiora. The plasma generated by powerful laser pulses produces high kinetic particles and energetic photons that may be employed in different fields, from medicine to microelectronics, from engineering to nuclear fusion, from chemistry to environment. A relevant interest concerns the understanding of the fundamental physical phenomena, the employed lasers, plasma diagnostics and their consequent applications. For this reason we need continuous updates, meetings and expertise exchanges in this field in order to follow the evolution and disclose information, that has been done this year in Lecce, discussing and comparing the experiences gained in various international laboratories. The conference duration, although limited to just 3 days, permitted to highlight important aspects of the research in the aforementioned fields, giving discussion opportunities about the activities of researchers of high international prestige. The program consisted of 10 invited talks, 17 oral talks and 17 poster contributions for a total of 44 communications. The presented themes covered different areas and, far from being exhaustive gave updates, stimulating useful scientific discussions. The Organizers belong to three Italian Universities

  7. International laser-safety regulations: a status update

    Science.gov (United States)

    Weiner, Robert M.

    1990-07-01

    There is an increase in international laser safety requirements as part of the emphasis on world-wide standardization of products and regulations. In particular the documents which will evolve from the 1992 consolidation efforts of the European Community (EC) will impact both laser manufacturers and users. This paper provides a discussion of the current status of the various laser radiation standards. NORTH AMERICAN REQUIREMENTS United States Requirements on manufacturers from the Food and Drug Administration (FDA) have been in effect since 1975. The Center for Devices and Radiological Health (CDRH) within that agency ensures that these mandatory requirements [1] are satisfied. The CDRH regulations include the division of products into classes depending on their potential for hazard criteria for power measurement and requirements for product features labels and manuals and records and reports. Manufacturers must test products and certify that they comply with the CDRH requirements. User requirements are found in a standard published by the American National Standards Institute (ANSI) and in requirements from several individual states. Specific ANSI standards have also been published for fiber communications systems [34] and for lasers in medical applications [35]. Please note that the Appendix includes additional information on the standards discussed in this paper including sources for obtaining the documents. Canada In the past Canada has had requirements for two specified product categories (bar code scanners and educational lasers) [26 These will be replaced

  8. The Laser Guide Star System for Adaptive Optics at Subaru Telescope

    Science.gov (United States)

    Hayano, Y.; Saito, Y.; Ito, M.; Saito, N.; Akagawa, K.; Takazawa, A.; Ito, M.; Wada, S.; Takami, H.; Iye, M.

    -power laser beam with no suffer from the non-linear scatter effect, i.e. stimulated Brillouin scatter, in the PCF. The laser launching telescope (LLT) has an output clear aperture as 50 cm. It is classical Cassegrain type optical configuration with tertiary mirror to insert the laser beam from the side. The wavefront error is designed to be 60 to 70nm. The LLT is a copy product what European Southern Observatory has been designed for the laser guide star system at Very Large Telescope. We succeeded to launch the laser beam to the sky on October 12, 2006. After several tests on the sky, we succeeded to get an image of the laser guide star with the size of more than 10 arc second. The larger size of the laser guide star is caused by the large optical aberration on the primary mirror of LLT due to the heat stress generated at the trigonal support points. We are making a plan to repair this problem during June and the second laser launching test will start around this summer.

  9. The Europeanization of National Judiciaries

    DEFF Research Database (Denmark)

    Jaremba, Urszula; Mayoral, Juan A.

    2018-01-01

    judiciaries is still somewhat scattered and fragmented. The central ambition of this article is to provide a theoretical framework that would contribute to the understanding of Europeanization of judiciaries by: 1) offering a definition and theoretical developments useful for the study Europeanization and its......The article is underpinned by the idea that the national courts/judges are expected to act as decentralized European Union judges. However, the general knowledge concerning the impact of EU law on the functioning of national courts as EU judges and the process of Europeanization of national...

  10. Denmark and the European Union

    DEFF Research Database (Denmark)

    Manners, Ian

    2011-01-01

    Over the past two decades Morten Kelstrup’s work has been at the centre of three important intellectual innovations in political science – the study of the EU as a regional political system; European security studies; and small states in European integration. Kelstrup’s best known books (Buzan, K...... of this book, two of Kelstrup’s most important intellectual contributions come from his work on Denmark’s relations with the European Union, and his use of systems theory to understand the EU.......Over the past two decades Morten Kelstrup’s work has been at the centre of three important intellectual innovations in political science – the study of the EU as a regional political system; European security studies; and small states in European integration. Kelstrup’s best known books (Buzan...

  11. The European Communities (Privileges of the Joint European Torus) Order 1978 (S.I. no. 1033)

    International Nuclear Information System (INIS)

    1978-01-01

    This Order confers privileges on the Joint European Torus, as required by Decision 78/472/Euratom of 30 May 1978 of the Council of the European Communities and by the Exchange of Letters of 3 May 1978 between the Government of the United Kingdom and the European Atomic Energy Community [fr

  12. Generation of fast neutrons through deuteron acceleration at the PALS laser facility

    Czech Academy of Sciences Publication Activity Database

    Krása, Josef; Klír, Daniel; Velyhan, Andriy; Řezáč, Karel; Cikhardt, Jakub; Ryć, L.; Krouský, Eduard; Pfeifer, Miroslav; De Marco, Massimo; Skála, Jiří; Dudžák, Roman; Ullschmied, Jiří

    2016-01-01

    Roč. 11, Mar (2016), 1-11, č. článku C03050. ISSN 1748-0221 R&D Projects: GA ČR(CZ) GA15-02964S; GA MŠk(CZ) LG13029; GA MŠk(CZ) LD14089 EU Projects: European Commission(XE) 654148 - LASERLAB-EUROPE Institutional support: RVO:68378271 ; RVO:61389021 Keywords : plasma generation (laser-produced, RF, x-ray-produced) * plasma diagnostics-charged-particle spectroscopy * plasma diagnostics probes Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.220, year: 2016

  13. Laser Remelting of Plasma-Sprayed Tungsten Coatings

    Czech Academy of Sciences Publication Activity Database

    Matějíček, Jiří; Holub, P.

    2014-01-01

    Roč. 23, č. 4 (2014), s. 750-754 ISSN 1059-9630 R&D Projects: GA ČR(CZ) GAP108/12/1872 Grant - others:European Project ExtreMat(XE) NMP-CT-2004-500253 Institutional support: RVO:61389021 Keywords : functionally graded coatings * laser remelting * plasma facing materials * thermal conductivity * water stabilized plasma Subject RIV: JK - Corrosion ; Surface Treatment of Materials Impact factor: 1.344, year: 2014 http://link.springer.com/article/10.1007%2Fs11666-014-0067-4

  14. Nuclear energy: the European way

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The dossier published in this issue deals with the present and future situation of nuclear energy in Europe. What could be the trends of the nuclear development in the Europe of tomorrows. That global question is answered by pointing out the different data related to the present state of european nuclear programmes. Such an overview is followed by a serie of articles dealing with definite items: the actions implemented by the European Communities Commission: the electricity market and EDF policy in the field of european electric grids; the trends of nuclear cycle industry and the perfecting of the future european nuclear reactor

  15. The 1997 Protocol and the European Union (European Union and '2nd generation' responsibility conventions)

    International Nuclear Information System (INIS)

    Handrlica, Jakub; Novotna, Marianna

    2014-01-01

    The issue of accession of the Eastern European Member States to the 1997 Protocol is discussed with focus on the European Union's authority and enforcement powers. Following up the article published in the preceding issue of this journal, the present contribution analyses the relations of the '2nd generation' responsibility conventions to the law of the European Union. (orig.)

  16. An application of the theory of laser to nitrogen laser pumped dye laser

    International Nuclear Information System (INIS)

    Osman, Fatima Ahmed

    1998-03-01

    In this thesis we gave a general discussion on lasers, reviewing some of their properties, types and application. We also conducted an experiment where we obtained a dye laser pumped by nitrogen laser with a wave length of 337.1 nm and a power of 5 Mw.It was noticed that the produced radiation possesses characteristics different from those of other types of laser. This characteristics determine the tunability i.e the possibility of choosing the appropriately required wave-length of radiation for various applications.(Author)

  17. Natural gas in the European Community

    International Nuclear Information System (INIS)

    Kalim, Z.

    1991-01-01

    A report is presented on 'Natural Gas in the European Community'. Aspects discussed include the challenges facing the gas industry in the EC, the development of the European gas industry, the structure and role of European gas companies, the sources of European supply, gas contracts and the influences that operate on sales into end markets, electricity generation from natural gas, evolving markets for natural gas in the EC, life in the private sector using British Gas as a role model and country profiles for eleven European countries. (UK)

  18. Improving the laser brightness of a commercial laser system

    Science.gov (United States)

    Naidoo, Darryl; Litvin, Igor; Forbes, Andrew

    2016-02-01

    We investigate the selection of a flat-top beam and a Gaussian beam inside a laser cavity on opposing mirrors. The concept is tested external to the laser cavity in a single pass and double pass regime where the latter mimics a single round trip in the laser. We implement this intra-cavity selection through the use of two 16 level diffractive optical elements. We consider a solid-state diode side-pumped laser resonator in a typical commercial laser configuration that consists of two planar mirrors where the DOEs are positioned at the mirrors. We out couple the Gaussian and flat-top distributions and we show that we improve the brightness of the laser with active mode control. We also demonstrate that the quality of the beam transformations determine the brightness improvement.

  19. Tuberculosis among migrant populations in the European Union and the European Economic Area.

    Science.gov (United States)

    Odone, Anna; Tillmann, Taavi; Sandgren, Andreas; Williams, Gemma; Rechel, Bernd; Ingleby, David; Noori, Teymur; Mladovsky, Philipa; McKee, Martin

    2015-06-01

    Although tuberculosis (TB) incidence has been decreasing in the European Union/European Economic Area (EU/EEA) in the last decades, specific subgroups of the population, such as migrants, remain at high risk of TB. This study is based on the report 'Key Infectious Diseases in Migrant Populations in the EU/EEA' commissioned by The European Centre for Disease Prevention and Control. We collected, critically appraised and summarized the available evidence on the TB burden in migrants in the EU/EEA. Data were collected through: (i) a comprehensive literature review; (ii) analysis of data from The European Surveillance System (TESSy) and (iii) evidence provided by TB experts during an infectious disease workshop in 2012. In 2010, of the 73,996 TB cases notified in the EU/EEA, 25% were of foreign origin. The overall decrease of TB cases observed in recent years has not been reflected in migrant populations. Foreign-born people with TB exhibit different socioeconomic and clinical characteristics than native sufferers. This is one of the first studies to use multiple data sources, including the largest available European database on infectious disease notifications, to assess the burden and provide a comprehensive description and analysis of specific TB features in migrants in the EU/EEA. Strengthened information about health determinants and factors for migrants' vulnerability is needed to plan, implement and evaluate targeted TB care and control interventions for migrants in the EU/EEA. © The Author 2014. Published by Oxford University Press on behalf of the European Public Health Association.

  20. The European Programme Manager

    DEFF Research Database (Denmark)

    Larson, Anne; Bergman, E.; Ehlers, S.

    The publication is a result of a cooperation between organisations in six European countries with the aim to develop a common European education for programme managers. It contains of a description of the different elements of the education together with a number of case-studies from the counties...

  1. National choices in a European perspective. Proceedings of the European Forum 2003

    International Nuclear Information System (INIS)

    Sido, Bruno; Lamoureux, Francois; ); Herzog, Philippe; ); Barre, Bertrand; Bataille, Christian; Colombani, Pascal; Gonzalez Gomez, Jose Luis; Lescoeur, DBruno; Perez, Serge; Weh, Rudolf; Westerlind, Magnus; Houssin, Didier; Nagashima, Hideo; Pavlopoulos, Panagiotis; Linkohr, Rolf; ); Allemeersch, Antoine; Beveridge, George; Bonnemains, Jacky; Fritschi, Markus; Piguet, Jack-Pierre; Rigny, Paul; Streydio, Jean-Marie; Tallec, Michele; Vasa, Ivo; Pancher, Bertrand

    2003-01-01

    In 2003, the 'Entretiens europeens' engaged a dialogue between stakeholders of various socio-professional backgrounds from several countries and with the European Commission, in order to compare the selected options of management of radioactive waste and materials and to emphasize the best experiments, which could inspire an innovating European policy in the world. This document is the proceedings of this first European Forum on this topic. Content: 1 - Introduction by Bruno Sido, senator and chairman of the County Council of Haute-Marne; 2 - talk by Francois Lamoureux, General Director of DG TREN, European Commission. 3 - Debate with the audience. 4 - First round table chaired by Philippe Herzog, Member of the European Parliament and President of Confrontations Europe: Is a European directive feasible? Within what time frame? What flexibility is required? What democratic process is needed? With the contributions from: Bertrand Barre, Manager in charge of Scientific Communications (AREVA), Christian Bataille, Member of the French Parliament, author of the 'Bataille Law', Pascal Colombani, Administrator, British Energy (nuclear power producer in UK), Jose Luis Gonzalez Gomez, ENRESA (Spain), Bruno Lescoeur, Director of the Energy sector, EDF, Serge Perez, Trade Unionist, Member of the National Bureau, FNME CGT (France), Rudolf Weh, Head of Department Spent Fuel and Waste Management Services/Interim Storage, GNS Gesellschaft fuer Nuklear-Service mbH (Germany), Magnus Westerlind, Manager Nuclear Security, SKI (Sweden). 5 - Hearing Didier Houssin, Director, Raw Materials and Hydrocarbons, DGEMP. 6 - Interventions of Hideo Nagashima, Executive Director, NUMO (Japan) and of Panagiotis Pavlopoulos, Research Director CERN, Geneva. 7 - Second round table chaired by Rolf Linkohr, Member of the European Parliament and chairman of European Energy Foundation: 'The scientific and social importance of the various options for the management of nuclear waste' With the contributions

  2. Mechanism of single-pulse ablative generation of laser-induced periodic surface structures

    Czech Academy of Sciences Publication Activity Database

    Shugaev, M.V.; Gnilitskyi, I.; Bulgakova, Nadezhda M.; Zhigilei, L.

    2017-01-01

    Roč. 96, č. 20 (2017), s. 1-9, č. článku 205429. ISSN 2469-9950 R&D Projects: GA MŠk LO1602; GA ČR GA16-12960S; GA MŠk LM2015086 EU Projects: European Commission(XE) 739573 - HiLASE CoE Grant - others:OP VVV - HiLASE-CoE(XE) CZ.02.1.01/0.0/0.0/15_006/0000674 Institutional support: RVO:68378271 Keywords : molecular-dynamics simulations * metals * electron * spallation Subject RIV: BH - Optics, Masers, Lasers OBOR OECD: Optics (including laser optics and quantum optics) Impact factor: 3.836, year: 2016

  3. Measurements of laser parameters for the Shiva laser fusion facility

    International Nuclear Information System (INIS)

    Ozarski, R.G.

    1979-01-01

    Large laser systems require numerous laser diagnostics to provide configuration, performance and maintenance data to permit efficient operation. The following diagnostics for a large laser system named Shiva are discussed: (1) description of Shiva laser system, (2) what measurements are desired and or required and why, (3) what measurement techniques and packages are employed and a brief description of the operating principles of the sensors employed, and (4) the laser diagnostic data acquisition and display system

  4. Priority for import capacity. The fear of the European Union for a free European energy market

    International Nuclear Information System (INIS)

    Roggen, M.

    2002-01-01

    Brussels (the seat of the European Union in Belgium) is worried about the performance of the liberalized European energy market. The natural gas and electricity networks are suffering from chronic congestion. Some areas are largely or even entirely cut off from the European energy infrastructure. Those problems must be addressed to realize the internal market. A package of reforms has been put forward by the European Commission the end of 2001 and 12 priority projects are identified and briefly discussed in this article [nl

  5. The Mercury Laser Advances Laser Technology for Power Generation

    Energy Technology Data Exchange (ETDEWEB)

    Ebbers, C A; Caird, J; Moses, E

    2009-01-21

    The National Ignition Facility (NIF) at Lawrence Livermore Laboratory is on target to demonstrate 'breakeven' - creating as much fusion-energy output as laser-energy input. NIF will compress a tiny sphere of hydrogen isotopes with 1.8 MJ of laser light in a 20-ns pulse, packing the isotopes so tightly that they fuse together, producing helium nuclei and releasing energy in the form of energetic particles. The achievement of breakeven will culminate an enormous effort by thousands of scientists and engineers, not only at Livermore but around the world, during the past several decades. But what about the day after NIF achieves breakeven? NIF is a world-class engineering research facility, but if laser fusion is ever to generate power for civilian consumption, the laser will have to deliver pulses nearly 100,000 times faster than NIF - a rate of perhaps 10 shots per second as opposed to NIF's several shots a day. The Mercury laser (named after the Roman messenger god) is intended to lead the way to a 10-shots-per-second, electrically-efficient, driver laser for commercial laser fusion. While the Mercury laser will generate only a small fraction of the peak power of NIF (1/30,000), Mercury operates at higher average power. The design of Mercury takes full advantage of the technology advances manifest in its behemoth cousin (Table 1). One significant difference is that, unlike the flashlamp-pumped NIF, Mercury is pumped by highly efficient laser diodes. Mercury is a prototype laser capable of scaling in aperture and energy to a NIF-like beamline, with greater electrical efficiency, while still running at a repetition rate 100,000 times greater.

  6. The European standard series in 9 European countries, 2002/2003 -- first results of the European Surveillance System on Contact Allergies

    DEFF Research Database (Denmark)

    Uter, W; Hegewald, J; Aberer, W

    2005-01-01

    Since January 2001, the European Surveillance System on Contact Allergies (ESSCA), supported by European Union funding (contract QLK4-CT-2001-00343), has started to collect patch-test data. This comprises a standardized clinical history and the patch-test results using the European standard series...... observed. The prevalence of contact allergy to Myroxylon pereirae resin (balsam of Peru) (5.8%) is coming close to the frequency found with the fragrance mix (6.4%). Regarding contact allergy to chromium compounds, different frequencies were noted in the 2 centres focused on occupational dermatitis (2......-marketing surveillance in the field of contact allergy, ESSCA will meet its objective of increased consumer safety across Europe....

  7. Vocational Training in the European Union

    Directory of Open Access Journals (Sweden)

    Mehmet BALCI

    2013-01-01

    Full Text Available European Union requires some standards in all areas. Today, the importance of training qualified individuals which holds an important place in the development of countries increases and certain standards are adopted creating common European Union tools in the field of vocational and technical education. In this study, vocational education and training policies system and the standards adopted by the European Union are discussed. Furthermore, this study was accepted as a European Union project in 2010 and the results obtained from the Leonardo Da Vinci Life Learning European Union project called “Web Based Basic Vocational Training” between the years 2010-2012 were presented. Since the partners of these projects are Turkey, Spain and Germany, the structure of vocational education, institutions of public and private vocational education and the diplomas and certificates entitled after these educations are included. As Turkey is on its way to become a European Union member, a number of advices are presented for Turkey to reach its destination about vocational education standards that European Union has aimed. The purpose of the study is not only to be a guide for the young who want to get professional training in the countries that are European Union members or candidates about how and where to have education opportunities but also to give a chance for trainers and training managers, participating in vocational training, so as to glimpse different practices from different countries and compare these practices between the countries of European Union and their countries. The study is also very important as it has the opportunities for training managers to see if their countries' vocational education is close enough to vocational education in European Union.

  8. The European Public on Social Media

    DEFF Research Database (Denmark)

    Tarta, Ancuta-Gabriela

    This study explorers the European public on social media by discussing the case of communicative interactions taking place on the official Facebook page of the European Parliament. Based on the theoretical framework conceptualizing the public and the public sphere on social network sites, the study...... examines the European social media public from two perspectives. The first is a top-down, institutional perspective of European Parliament, based on a case-study approach to the way this European institution constructs and addresses the public through its social media communication. The second is a bottom......-up perspective of the public of social media users, informed by a content analysis of Facebook comments and a discourse analysis of live chat interactions with Members of the European Parliament. Results confirm a discursive potential of the Facebook public of users. In the case of the Facebook comment threads...

  9. Towards the development of European networks

    International Nuclear Information System (INIS)

    Hanreich, G.

    2004-01-01

    The second AFG (French Gas Association) forum, held on June 17, addressed the issue of links between European networks with presentations by Guenther Hainreich, Director of Trans-European Networks for the European Commission Energy and Transport DG, and Loannis Galanis, Assistant Unit Director for the European Commission Energy and Transport DG. The choice for this topic has been influenced by the opening of gas markets in Europe which supposes that two conditions are fulfilled: first, the existence of gas availabilities, and second, the development of transportation, storage and LNG terminal infrastructures. In this context, the national policies are today the regional variations of a European policy at the service of the reinforcement of isolated areas and of the sustain of expanding areas. It is thus necessary to consider the European point-of-view about the existing infrastructures, their development and their financing means

  10. Play the European card

    International Nuclear Information System (INIS)

    Majewski, O.

    1999-01-01

    Dr. Otto Majewski, Chief Executive Officer of the Bayernwerk AG utility, in his capacity as Chairman of the European Nuclear Council pointed out at ENC 98 in Nice that national energy policies constituted a major danger to the use of nuclear power. At the same time, he indicated ways and means by which to evade that danger. The decisions taken in Sweden and in the Federal Republic of Germany to opt out of the use of nuclear power show that national energy policies can seriously jeopardize the use of nuclear power. Bayernwerk CEO Dr. Majewski urged nuclear power plant operators to counteract these tendencies by playing the European card. Nuclear power anyway was a classical topic of European cooperation which, in the past, had resulted in higher safety standards and in the development of the EPR. It should also be attempted, by working on European institutions, to strengthen the use of nuclear power, even on a national level. He invoked economic arguments against nuclear opponents, especially the preservation of competitiveness by means of lower electricity prices, and arguments of climate protection. (orig.) [de

  11. The European Network of Coloproctology: a strategy towards the European research and healthcare system.

    Science.gov (United States)

    Rubbini, Michele

    2016-12-01

    Many documents from the International Institutions point out that Health represents an engine of economic and social development. Based on these documents and concepts, the European Parliament decided to create a system of European Reference Networks as a synthesis of clinical and research activities, particularly in the field of rare diseases. This initiative, properly implemented, could be first step towards a new European health system. This article instead, wanting to deepen this perspective, postulates that the ERNs may also be related to widespread diseases, such as those of coloproctological interest, with the aim of setting up a European Network of Coloproctology (ENCP). Here are analyzed: (a) the documents related to ERNs and others related to research and training, the characteristics of the coloproctological diseases, and proposal of the ENCP; (b) a survey that involves 14 out of 25 of the National and Regional Representative of the European Society of Coloproctology. Hundred percent of the people interviewed agree to the ENCP project. The percentage of the approved proposed fields of activity of the ENCP are: Healthcare 71%, Research 100%, Training 86%, Support to legislation 78%, Professional Mobility 64%, Patient Database 71%, and Expenditure control 64%. From the analysis of the documents and the result of the survey, ERNs are appropriate not only in relation to rare diseases but also in those fields with higher diffusion and the creation of a European Network of Coloproctology is then postulated.

  12. The spatialization of the european project

    DEFF Research Database (Denmark)

    Richardson, Tim; Jensen, Ole B.

    This paper argues the need for more critical analysis of the ?spatialisation of the European Project? than has been the case in much previous academic work on the European Union`s spatial policy so far. The focus is on the EU, and the way that this huge institutional and territorial setting...... is organised, driven and imagined according to a particular hegemonic spatiality which gives shape to the political, economic, social and territorial dimensions of the European project....

  13. The constitutional momentum of European contract law (II): The DCFR and the European constitutional order

    NARCIS (Netherlands)

    Mak, C.

    2009-01-01

    This paper analyses the potential impact of the recently published Draft Common Frame of Reference for European contract law (DCFR) on the European constitutional process. Looking at the combination of characteristics of codification and aspects of constitutionalism reflected in the DCFR, it is

  14. The European Union: Challenges and Perspectives

    Directory of Open Access Journals (Sweden)

    Botescu Ion

    2017-01-01

    If to all these we add the protectionist measures that the new president of the United States wishes to implement, as well as some deterioration in the European Union credibility generated by Brexit, the bureaucratic aspects that characterize the European institutions, etc., we can outline the context of the European Union, which requires a series of measures to ensure the progress of the European Union as a whole and, in particular, the effective integration of each Community country.

  15. The European Union's Africa Policy

    DEFF Research Database (Denmark)

    Olsen, Gorm Rye

    2013-01-01

    For a number of years, there has been an international debate on whether and to what extent small member states can influence the common external policies of the European Union. Recent research on the role of small EU states concludes that these states are neither per se political dwarfs nor power...... including North–South and specifically Africa policies. Five separate analyses are carried out addressing the question of Nordicization and Europeanization. Based on the empirical analyses, it is not possible to confirm the hypothesis that a Nordicization of the European Union's Africa policy has taken...... place. Rather, it appears adequate to talk about convergence of policies between the Nordics and the EU and therefore, the Africa policies of both actors are basically the result of Europeanization....

  16. The Eurosceptic Europeanization of Public Spheres: Print and Social Media Reactions to the 2014 European Parliament Elections

    DEFF Research Database (Denmark)

    Dutceac Segesten, Anamaria; Bossetta, Michael

    2017-01-01

    The present study tests the theoretical claim that Eurosceptics contribute to the Europeanization of national public spheres. Although advocating a renationalization of European politics, Eurosceptic parties can engender public media debates of transnational or European relevance. Through...... of social media vis-à-vis traditional media structures: print media was more Europeanized in scope, whereas social media publics were more aligned in their sentiment towards Euroscepticism....... a comparative research design of two national cases (Sweden and Denmark), we examine the public discourse on the day following the 2014 European Parliament elections across three media: print, Twitter, and Facebook. Separating the discussions of Eurosceptic issues and actors from other topics of the election...

  17. Amyotrophic lateral sclerosis (ALS: three letters that change the people's life. For ever Esclerose lateral amiotrófica (ELA: três letras que mudam a vida de uma pessoa. Para sempre

    Directory of Open Access Journals (Sweden)

    Acary Souza Bulle Oliveira

    2009-09-01

    recognition of the clinical and social effects of cognitive impairment. Social, bioethical, and financial issues as well as advance directives should be addressed. A plethora of evidence-based guidelines should be compiled into an internationally agreed guideline of best practice. The multidisciplinary team has changed the history of disease, with still no curative therapy available.A esclerose lateral amiotrófica (ELA é doença neurodegenerativa comprometendo o sistema nervoso motor. Ela causa comprometimento físico, progressivo e acumulativo, com óbito freqüentemente decorrente de falência respiratória. A enfermidade apresenta características diversas nas formas de apresentação, curso e progressão. Não entendemos ainda a causa ou causas dessa enfermidade, nem os mecanismos que regem a sua progressão; assim, tratamentos efetivos não são, até o momento, conhecidos. Atualmente, recomenda-se que os pacientes com ELA sejam tratados com equipe multidisciplinar. Embora ELA e suas variantes sejam reconhecidas por neurologistas, cerca de 10% dos pacientes são mal diagnosticados, e a demora para a confirmação diagnóstica não é incomum. Diagnóstico precoce, informação do diagnóstico com honestidade e sensibilidade, envolvimento do paciente e sua família, e um plano de atenção terapêutica positivo são pré-requisitos essenciais para um melhor resultado clínico e fim terapêutico. Tratamento multidisciplinar e cuidados paliativos podem prolongar a sobrevida e manter melhores aspectos de qualidade de vida. Tratamento com Riluzol aumenta a sobrevida, mas sem alteração na deterioração funcional, enquanto que ventilação não-invasiva prolonga a sobrevida e aumenta ou mantém qualidade de vida. Nesta revisão, nós discutimos o diagnóstico, envolvimento e formas de lidar com dificuldades de funcionamento e de fim de vida, baseando-se na nossa experiência, nos pareceres de peritos, em guias de medicina baseada em evidências científicas, e nos ensaios

  18. The Cases of the European Values Study and the European Social Survey

    DEFF Research Database (Denmark)

    Kropp, Kristoffer

    2017-01-01

    institutions, had ties to the EU, and used survey techniques to address urgent contemporary political and social problems. Despite their similarities, the surveys represent two rather different constellations of social science knowledge production. The EVS emerged from a coalition of Catholic-oriented agents...... continued to play a significant role in its constellation. The ESS grew out of a scientific and technical aspiration among wellconnected and recognised Western European social scientists. It emphasised rigourous methods and drew on its founding agents’ close relations with European institutions...

  19. CFC legislation in the European Union

    Directory of Open Access Journals (Sweden)

    Cvjetković Cvjetana M.

    2015-01-01

    Full Text Available In this paper the author considers CFC legislation in the Member States of the European Union, and points to the official attitude of the institutions of the European Union toward CFC legislation. Special attention in this paper is focused on Judgment of the Court of Justice of the European Union in the case Cadbury Schweppes. The aim of the paper is to analyze CFC legislation in the Member States in order to determine its basic characteristics, as well as to determine its compatibility with freedoms guaranteed by the primary law of the European Union, i.e. with Judgment of the Court of Justice of the European Union in the Cadbury Schweppes case.

  20. Demand Side Management for the European Supergrid: Occupancy variances of European single-person households

    International Nuclear Information System (INIS)

    Torriti, Jacopo

    2012-01-01

    The prospect of a European Supergrid calls for research on aggregate electricity peak demand and Europe-wide Demand Side Management. No attempt has been made as yet to represent a time-related demand curve of residential electricity consumption at the European level. This article assesses how active occupancy levels of single-person households vary in single-person household in 15 European countries. It makes use of occupancy time-series data from the Harmonised European Time Use Survey database to build European occupancy curves; identify peak occupancy periods; construct time-related electricity demand curves for TV and video watching activities and assess occupancy variances of single-person households. - Highlights: ► Morning peak occupancies of European single households tale place between 7h30 and 7h40. ► Evening peaks take place between 20h10 and 20h20. ► TV and video activities during evening peaks make up about 3.1 GWh of European peak electricity load. ► Baseline and peak occupancy variances vary across countries. ► Baseline and peak occupancy variances can be used as input for Demand Side Management choices.

  1. New solid laser: Ceramic laser. From ultra stable laser to ultra high output laser

    International Nuclear Information System (INIS)

    Ueda, Kenichi

    2006-01-01

    An epoch-making solid laser is developed. It is ceramic laser, polycrystal, which is produced as same as glass and shows ultra high output. Ti 3+ :Al 2 O 3 laser crystal and the CPA (chirped pulse amplification) technique realized new ultra high output lasers. Japan has developed various kinds of ceramic lasers, from 10 -2 to 67 x 10 3 w average output, since 1995. These ceramic lasers were studied by gravitational radiation astronomy. The scattering coefficient of ceramic laser is smaller than single crystals. The new fast ignition method is proposed by Institute of Laser Engineering of Osaka University, Japan. Ultra-intense short pulse laser can inject the required energy to the high-density imploded core plasma within the core disassembling time. Ti 3+ :Al 2 O 3 crystal for laser, ceramic YAG of large caliber for 100 kW, transparent laser ceramic from nano-crystals, crystal grain and boundary layer between grains, the scattering coefficient of single crystal and ceramic, and the derived release cross section of Yb:YAG ceramic are described. (S.Y.)

  2. Design of pre-optics for laser guide star wavefront sensor for the ELT

    Science.gov (United States)

    Muslimov, Eduard; Dohlen, Kjetil; Neichel, Benoit; Hugot, Emmanuel

    2017-12-01

    In the present paper, we consider the optical design of a zoom system for the active refocusing in laser guide star wavefront sensors. The system is designed according to the specifications coming from the Extremely Large Telescope (ELT)-HARMONI instrument, the first-light, integral field spectrograph for the European (E)-ELT. The system must provide a refocusing of the laser guide as a function of telescope pointing and large decentring of the incoming beam. The system considers four moving lens groups, each of them being a doublet with one aspherical surface. The advantages and shortcomings of such a solution in terms of the component displacements and complexity of the surfaces are described in detail. It is shown that the system can provide the median value of the residual wavefront error of 13.8-94.3 nm and the maximum value <206 nm, while the exit pupil distortion is 0.26-0.36% for each of the telescope pointing directions.

  3. Analysis of the European Food Industry

    OpenAIRE

    Banse, Martin; McDonald, Scott; Joint Research Centre; Institute for Prospective Technological Studies; Kaditi, Eleni

    2008-01-01

    This report is based on a study assigned to the Centre for European Policy Studies (CEPS) by the European Commission¿s Joint Research Centre, Institute for Prospective Technological Studies (JRC-IPTS) to investigate recent developments in the European food industry and the impact of foreign direct investment (FDI) and trade flows on the food industry in the EU-25. The report illustrates trends in and the structure of the European food industry. Past and possible future developments are ana...

  4. European social model and the harmonization of Macedonian labour legislation with the European Union community labour law

    Directory of Open Access Journals (Sweden)

    Kalamatiev Todor

    2014-01-01

    Full Text Available The European integration process accompanied by the harmonization of the EU member states' legislation will inevitably lead to the establishment of a European social model which has a 'sui generis' legal nature. European social model forms a part of the common legal heritage of the European countries and it can be defined as a system of values that include democracy and individual rights, free collective bargaining, market economy, equal opportunities for all, and social protection and solidarity. Subject of analysis in this paper are both, the essential components of the European social model such as: the social 'acquis communautaire' and the European industrial relations. The social 'acquis communautaire' is an integral part of the general 'acquis communautaire' and it encompasses the regulations arising from the primary and secondary labour law legislation of the EU, decisions of the European Court of Justice and other legal measures of the European Union with a binding or non-binding legal nature. European industrial relations encompass the key features of the European trade union models as well as the types of social dialogue in different EU member states. This paper pays attention to a profound elaboration of the harmonization of two EU labour law directives with the Macedonian employment legislation. The first Directive (Directive 91/533/EEC of 14 October 1991 on an employers' obligation to inform employees of the conditions applicable to the contract or employment relationship may be classified in the field of individual employment relations, while the second one (Directive 2002/14/EC of 11 March 2002 establishing a general framework for informing and consulting employees in the European Community can be subsumed within the field of collective employment relations. Finally, the authors illustrate the advantages and disadvantages of the Macedonian labour legislation in the process of harmonization with the relevant EU directives

  5. The influence of laser-particle interaction in laser induced breakdown spectroscopy and laser ablation inductively coupled plasma spectrometry

    International Nuclear Information System (INIS)

    Lindner, Helmut; Loper, Kristofer H.; Hahn, David W.; Niemax, Kay

    2011-01-01

    Particles produced by previous laser shots may have significant influence on the analytical signal in laser-induced breakdown spectroscopy (LIBS) and laser ablation inductively coupled plasma (LA-ICP) spectrometry if they remain close to the position of laser sampling. The effects of these particles on the laser-induced breakdown event are demonstrated in several ways. LIBS-experiments were conducted in an ablation cell at atmospheric conditions in argon or air applying a dual-pulse arrangement with orthogonal pre-pulse, i.e., plasma breakdown in a gas generated by a focussed laser beam parallel and close to the sample surface followed by a delayed crossing laser pulse in orthogonal direction which actually ablates material from the sample and produces the LIBS plasma. The optical emission of the LIBS plasma as well as the absorption of the pre-pulse laser was measured. In the presence of particles in the focus of the pre-pulse laser, the plasma breakdown is affected and more energy of the pre-pulse laser is absorbed than without particles. As a result, the analyte line emission from the LIBS plasma of the second laser is enhanced. It is assumed that the enhancement is not only due to an increase of mass ablated by the second laser but also to better atomization and excitation conditions favored by a reduced gas density in the pre-pulse plasma. Higher laser pulse frequencies increase the probability of particle-laser interaction and, therefore, reduce the shot-to-shot line intensity variation as compared to lower particle loadings in the cell. Additional experiments using an aerosol chamber were performed to further quantify the laser absorption by the plasma in dependence on time both with and without the presence of particles. The overall implication of laser-particle interactions for LIBS and LA-ICP-MS/OES are discussed.

  6. The influence of laser-particle interaction in laser induced breakdown spectroscopy and laser ablation inductively coupled plasma spectrometry

    Science.gov (United States)

    Lindner, Helmut; Loper, Kristofer H.; Hahn, David W.; Niemax, Kay

    2011-02-01

    Particles produced by previous laser shots may have significant influence on the analytical signal in laser-induced breakdown spectroscopy (LIBS) and laser ablation inductively coupled plasma (LA-ICP) spectrometry if they remain close to the position of laser sampling. The effects of these particles on the laser-induced breakdown event are demonstrated in several ways. LIBS-experiments were conducted in an ablation cell at atmospheric conditions in argon or air applying a dual-pulse arrangement with orthogonal pre-pulse, i.e., plasma breakdown in a gas generated by a focussed laser beam parallel and close to the sample surface followed by a delayed crossing laser pulse in orthogonal direction which actually ablates material from the sample and produces the LIBS plasma. The optical emission of the LIBS plasma as well as the absorption of the pre-pulse laser was measured. In the presence of particles in the focus of the pre-pulse laser, the plasma breakdown is affected and more energy of the pre-pulse laser is absorbed than without particles. As a result, the analyte line emission from the LIBS plasma of the second laser is enhanced. It is assumed that the enhancement is not only due to an increase of mass ablated by the second laser but also to better atomization and excitation conditions favored by a reduced gas density in the pre-pulse plasma. Higher laser pulse frequencies increase the probability of particle-laser interaction and, therefore, reduce the shot-to-shot line intensity variation as compared to lower particle loadings in the cell. Additional experiments using an aerosol chamber were performed to further quantify the laser absorption by the plasma in dependence on time both with and without the presence of particles. The overall implication of laser-particle interactions for LIBS and LA-ICP-MS/OES are discussed.

  7. The European energy community is now

    International Nuclear Information System (INIS)

    Andoura, Sami; Buzek, Jerzy; Delors, Jacques; Vitorino, Antonio

    2013-01-01

    On the eve of the European Council on 22 May dealing with energy issues, the Jacques Delors Institute publishes a Tribune calling for the implementation of a positive agenda for the European energy policy and the definition of the concrete bases of a genuine European Energy

  8. Laser resonance ionization spectroscopy on lutetium for the MEDICIS project

    Energy Technology Data Exchange (ETDEWEB)

    Gadelshin, V., E-mail: gadelshin@uni-mainz.de [University of Mainz, Institute of Physics (Germany); Cocolios, T. [KU Leuven, Institute for Nuclear and Radiation Physics (Belgium); Fedoseev, V. [CERN, EN Department (Switzerland); Heinke, R.; Kieck, T. [University of Mainz, Institute of Physics (Germany); Marsh, B. [CERN, EN Department (Switzerland); Naubereit, P. [University of Mainz, Institute of Physics (Germany); Rothe, S.; Stora, T. [CERN, EN Department (Switzerland); Studer, D. [University of Mainz, Institute of Physics (Germany); Duppen, P. Van [KU Leuven, Institute for Nuclear and Radiation Physics (Belgium); Wendt, K. [University of Mainz, Institute of Physics (Germany)

    2017-11-15

    The MEDICIS-PROMED Innovative Training Network under the Horizon 2020 EU program aims to establish a network of early stage researchers, involving scientific exchange and active cooperation between leading European research institutions, universities, hospitals, and industry. Primary scientific goal is the purpose of providing and testing novel radioisotopes for nuclear medical imaging and radionuclide therapy. Within a closely linked project at CERN, a dedicated electromagnetic mass separator system is presently under installation for production of innovative radiopharmaceutical isotopes at the new CERN-MEDICIS laboratory, directly adjacent to the existing CERN-ISOLDE radioactive ion beam facility. It is planned to implement a resonance ionization laser ion source (RILIS) to ensure high efficiency and unrivaled purity in the production of radioactive ions. To provide a highly efficient ionization process, identification and characterization of a specific multi-step laser ionization scheme for each individual element with isotopes of interest is required. The element lutetium is of primary relevance, and therefore was considered as first candidate. Three two-step excitation schemes for lutetium atoms are presented in this work, and spectroscopic results are compared with data of other authors.

  9. Laser resonance ionization spectroscopy on lutetium for the MEDICIS project

    Science.gov (United States)

    Gadelshin, V.; Cocolios, T.; Fedoseev, V.; Heinke, R.; Kieck, T.; Marsh, B.; Naubereit, P.; Rothe, S.; Stora, T.; Studer, D.; Van Duppen, P.; Wendt, K.

    2017-11-01

    The MEDICIS-PROMED Innovative Training Network under the Horizon 2020 EU program aims to establish a network of early stage researchers, involving scientific exchange and active cooperation between leading European research institutions, universities, hospitals, and industry. Primary scientific goal is the purpose of providing and testing novel radioisotopes for nuclear medical imaging and radionuclide therapy. Within a closely linked project at CERN, a dedicated electromagnetic mass separator system is presently under installation for production of innovative radiopharmaceutical isotopes at the new CERN-MEDICIS laboratory, directly adjacent to the existing CERN-ISOLDE radioactive ion beam facility. It is planned to implement a resonance ionization laser ion source (RILIS) to ensure high efficiency and unrivaled purity in the production of radioactive ions. To provide a highly efficient ionization process, identification and characterization of a specific multi-step laser ionization scheme for each individual element with isotopes of interest is required. The element lutetium is of primary relevance, and therefore was considered as first candidate. Three two-step excitation schemes for lutetium atoms are presented in this work, and spectroscopic results are compared with data of other authors.

  10. An overview of the laser ranging method of space laser altimeter

    Science.gov (United States)

    Zhou, Hui; Chen, Yuwei; Hyyppä, Juha; Li, Song

    2017-11-01

    Space laser altimeter is an active remote sensing instrument to measure topographic map of Earth, Moon and planetary. The space laser altimeter determines the range between the instrument and laser footprint by measuring round trip time of laser pulse. The return pulse reflected from ground surface is gathered by the receiver of space laser altimeter, the pulsewidth and amplitude of which are changeable with the variability of the ground relief. Meantime, several kinds of noise overlapped on the return pulse signal affect its signal-to-noise ratio. To eliminate the influence of these factors that cause range walk and range uncertainty, the reliable laser ranging methods need to be implemented to obtain high-precision range results. Based on typical space laser altimeters in the past few decades, various ranging methods are expounded in detail according to the operational principle of instruments and timing method. By illustrating the concrete procedure of determining time of flight of laser pulse, this overview provides the comparison of the employed technologies in previous and undergoing research programs and prospect innovative technology for space laser altimeters in future.

  11. The globalization and Europeanization of mortgage markets

    NARCIS (Netherlands)

    Aalbers, M.B.

    2009-01-01

    Do globalization and Europeanization lead to the deterritorialization of European mortgage markets? Neither economic globalization nor EU policies have resulted in one European mortgage market. The various European mortgage markets are still quite different from one another in many respects. In most

  12. The European Utility Requirement Document

    International Nuclear Information System (INIS)

    Roche, I.I.

    1999-01-01

    The major European electricity producers work on a common requirement document for future LWR plants since 1992. They aim at requirements acceptable together by the owners, the public and the authorities. Thus the designers can develop standard LWR designs acceptable everywhere in Europe and the utilities can open their consultations to vendors on common bases. Such a standardisation promotes an improvement of generation costs and of safety : public and authorities acceptance should be improved as well ; significant savings are expected in development and construction costs. Since the early stages of the project, the EUR group has grown significantly. It now includes utilities from nine European countries. Utilities from two other European countries are joining the group. Specific cooperation agreements are also in progress with a few extra-European partners

  13. The Political History of European Integration

    DEFF Research Database (Denmark)

    Schulz-Forberg, Hagen; Stråth, Bo

    This book adopts a historical perspective to explore the tensions between the idea of a European democracy through a European market, and the observations that there are signs of increasing social disintegration, political extremism and populism in the wake of economic integration. It was shortli......This book adopts a historical perspective to explore the tensions between the idea of a European democracy through a European market, and the observations that there are signs of increasing social disintegration, political extremism and populism in the wake of economic integration...

  14. The European system of veterinary specialization.

    Science.gov (United States)

    Romagnoli, Stefano

    2010-01-01

    Veterinary specialist diplomas were available in many European countries during the second half of the 20th century. However, such an early recognition of the importance of veterinary specialization actually delayed the concept of the European veterinary specialist in Europe, compared with the United States, where the first specialist colleges were established in the 1960s, because it was felt that the national system was functioning properly and there was therefore no need for a new structure in the European countries. The European Board of Veterinary Specialisation (EBVS) was established in 1996, and currently there are 23 specialist colleges with more than 2,600 veterinarians officially listed in the EBVS register as European specialists. The Advisory Committee on Veterinary Training (ACVT) approved the establishment of EBVS but never implemented a supervising body (with ACVT representation). Such a body, the European Coordinating Committee on Veterinary Training, was later implemented by the profession itself, although it still lacked a political component. Each college depends on the EBVS, which has the function to define standards and criteria for monitoring the quality of college diplomates. To become a European Diplomate, veterinarians must have gone through an intensive period of training supervised by a diplomate, after which candidates must pass an examination. Although the term European veterinary specialist still does not have any legal recognition, national specialist qualifications are being phased out in many countries because of the inherent higher quality of EBVS specialist qualifications.

  15. Development of welding technologies for the manufacturing of European Tritium Breeder blanket modules

    Energy Technology Data Exchange (ETDEWEB)

    Poitevin, Y., E-mail: yves.poitevin@f4e.europa.eu [Fusion for Energy (F4E), Barcelona (Spain); Aubert, Ph. [CEA Saclay, DEN/DM2S and DEN/DMN, F-91191 Gif-sur-Yvette (France); Diegele, E. [Fusion for Energy (F4E), Barcelona (Spain); Dinechin, G. de [CEA Saclay, DEN/DM2S and DEN/DMN, F-91191 Gif-sur-Yvette (France); Rey, J. [Institut fuer Neutronenphysik und Reaktortechnik, FZK, Karlsruhe (Germany); Rieth, M. [Institut fuer Materialforschung I, FZK, Karlsruhe (Germany); Rigal, E. [CEA Grenoble, DRT/DTH, F-38000 Grenoble (France); Weth, A. von der [Institut fuer Neutronenphysik und Reaktortechnik, FZK, Karlsruhe (Germany); Boutard, J.-L. [European Fusion Development Agreement (EFDA), Garching (Germany); Tavassoli, F. [CEA Saclay, DEN/DM2S and DEN/DMN, F-91191 Gif-sur-Yvette (France)

    2011-10-01

    Europe has developed two reference Tritium Breeder Blankets concepts for a DEMO fusion reactor: the Helium-Cooled Lithium-Lead and the Helium-Cooled Pebble-Bed. Both are using the reduced-activation ferritic-martensitic EUROFER-97 steel as structural material and will be tested in ITER under the form of test blanket modules. The fabrication of their EUROFER structures requires developing welding processes like laser, TIG, EB and diffusion welding often beyond the state-of-the-art. The status of European achievements in this area is reviewed, illustrating the variety of processes and key issues behind retained options, in particular with respect to metallurgical aspects and mechanical properties. Fabrication of mock-ups is highlighted and their characterization and performances with respect to design requirements are reviewed.

  16. Influence of the laser pulse duration on laser-produced plasma properties

    International Nuclear Information System (INIS)

    Drogoff, B Le; Margot, J; Vidal, F; Laville, S; Chaker, M; Sabsabi, M; Johnston, T W; Barthelemy, O

    2004-01-01

    In the framework of laser-induced plasma spectroscopy (LIPS) applications, time-resolved characteristics of laser-produced aluminium plasmas in air at atmospheric pressure are investigated for laser pulse durations ranging from 100 fs to 270 ps. Measurements show that for delays after the laser pulse longer than ∼100 ns, the plasma temperature increases slightly with the laser pulse duration, while the electron density is independent of it. In addition, as the pulse duration increases, the plasma radiation emission lasts longer and the spectral lines arise later from the continuum emission. The time dependence of the continuum emission appears to be similar whatever the duration of the laser pulse is, while the temporal evolution of the line emission seems to be affected mainly by the plasma temperature. Finally, as far as spectrochemical applications (such as LIPS) of laser-produced plasmas are concerned, this study highlights the importance of the choice of appropriate temporal gating parameters for each laser pulse duration

  17. Gene expression profiles in primary pancreatic tumors and metastatic lesions of Ela-c-myc transgenic mice

    Directory of Open Access Journals (Sweden)

    Liao Dezhong J

    2008-01-01

    Full Text Available Abstract Background Pancreatic carcinoma usually is a fatal disease with no cure, mainly due to its invasion and metastasis prior to diagnosis. We analyzed the gene expression profiles of paired primary pancreatic tumors and metastatic lesions from Ela-c-myc transgenic mice in order to identify genes that may be involved in the pancreatic cancer progression. Differentially expressed selected genes were verified by semi-quantitative and quantitative RT-PCR. To further evaluate the relevance of some of the selected differentially expressed genes, we investigated their expression pattern in human pancreatic cancer cell lines with high and low metastatic potentials. Results Data indicate that genes involved in posttranscriptional regulation were a major functional category of upregulated genes in both primary pancreatic tumors (PT and liver metastatic lesions (LM compared to normal pancreas (NP. In particular, differential expression for splicing factors, RNA binding/pre-mRNA processing factors and spliceosome related genes were observed, indicating that RNA processing and editing related events may play critical roles in pancreatic tumor development and progression. High expression of insulin growth factor binding protein-1 (Igfbp1 and Serine proteinase inhibitor A1 (Serpina1, and low levels or absence of Wt1 gene expression were exclusive to liver metastatic lesion samples. Conclusion We identified Igfbp1, Serpina1 and Wt1 genes that are likely to be clinically useful biomarkers for prognostic or therapeutic purposes in metastatic pancreatic cancer, particularly in pancreatic cancer where c-Myc is overexpressed.

  18. Gene expression profiles in primary pancreatic tumors and metastatic lesions of Ela-c-myc transgenic mice.

    Science.gov (United States)

    Thakur, Archana; Bollig, Aliccia; Wu, Jiusheng; Liao, Dezhong J

    2008-01-24

    Pancreatic carcinoma usually is a fatal disease with no cure, mainly due to its invasion and metastasis prior to diagnosis. We analyzed the gene expression profiles of paired primary pancreatic tumors and metastatic lesions from Ela-c-myc transgenic mice in order to identify genes that may be involved in the pancreatic cancer progression. Differentially expressed selected genes were verified by semi-quantitative and quantitative RT-PCR. To further evaluate the relevance of some of the selected differentially expressed genes, we investigated their expression pattern in human pancreatic cancer cell lines with high and low metastatic potentials. Data indicate that genes involved in posttranscriptional regulation were a major functional category of upregulated genes in both primary pancreatic tumors (PT) and liver metastatic lesions (LM) compared to normal pancreas (NP). In particular, differential expression for splicing factors, RNA binding/pre-mRNA processing factors and spliceosome related genes were observed, indicating that RNA processing and editing related events may play critical roles in pancreatic tumor development and progression. High expression of insulin growth factor binding protein-1 (Igfbp1) and Serine proteinase inhibitor A1 (Serpina1), and low levels or absence of Wt1 gene expression were exclusive to liver metastatic lesion samples. We identified Igfbp1, Serpina1 and Wt1 genes that are likely to be clinically useful biomarkers for prognostic or therapeutic purposes in metastatic pancreatic cancer, particularly in pancreatic cancer where c-Myc is overexpressed.

  19. The European Hematology Association Roadmap for European Hematology Research: a consensus document.

    Science.gov (United States)

    Engert, Andreas; Balduini, Carlo; Brand, Anneke; Coiffier, Bertrand; Cordonnier, Catherine; Döhner, Hartmut; de Wit, Thom Duyvené; Eichinger, Sabine; Fibbe, Willem; Green, Tony; de Haas, Fleur; Iolascon, Achille; Jaffredo, Thierry; Rodeghiero, Francesco; Salles, Gilles; Schuringa, Jan Jacob

    2016-02-01

    The European Hematology Association (EHA) Roadmap for European Hematology Research highlights major achievements in diagnosis and treatment of blood disorders and identifies the greatest unmet clinical and scientific needs in those areas to enable better funded, more focused European hematology research. Initiated by the EHA, around 300 experts contributed to the consensus document, which will help European policy makers, research funders, research organizations, researchers, and patient groups make better informed decisions on hematology research. It also aims to raise public awareness of the burden of blood disorders on European society, which purely in economic terms is estimated at €23 billion per year, a level of cost that is not matched in current European hematology research funding. In recent decades, hematology research has improved our fundamental understanding of the biology of blood disorders, and has improved diagnostics and treatments, sometimes in revolutionary ways. This progress highlights the potential of focused basic research programs such as this EHA Roadmap.The EHA Roadmap identifies nine 'sections' in hematology: normal hematopoiesis, malignant lymphoid and myeloid diseases, anemias and related diseases, platelet disorders, blood coagulation and hemostatic disorders, transfusion medicine, infections in hematology, and hematopoietic stem cell transplantation. These sections span 60 smaller groups of diseases or disorders.The EHA Roadmap identifies priorities and needs across the field of hematology, including those to develop targeted therapies based on genomic profiling and chemical biology, to eradicate minimal residual malignant disease, and to develop cellular immunotherapies, combination treatments, gene therapies, hematopoietic stem cell treatments, and treatments that are better tolerated by elderly patients. Copyright© Ferrata Storti Foundation.

  20. Application of lap laser welding technology on stainless steel railway vehicles

    Science.gov (United States)

    Wang, Hongxiao; Wang, Chunsheng; He, Guangzhong; Li, Wei; Liu, Liguo

    2016-10-01

    Stainless steel railway vehicles with so many advantages, such as lightweight, antirust, low cost of maintenance and simple manufacturing process, so the production of high level stainless steel railway vehicles has become the development strategy of European, American and other developed nations. The current stainless steel railway vehicles body and structure are usually assembled by resistance spot welding process. The weak points of this process are the poor surface quality and bad airtight due to the pressure of electrodes. In this study, the partial penetration lap laser welding process was investigated to resolve the problems, by controlling the laser to stop at the second plate in the appropriate penetration. The lap laser welding joint of stainless steel railway vehicle car body with partial penetration has higher strength and surface quality than those of resistance spot welding joint. The biggest problem of lap laser welding technology is to find the balance of the strength and surface quality with different penetrations. The mechanism of overlap laser welding of stainless steel, mechanical tests, microstructure analysis, the optimization of welding parameters, analysis of fatigue performance, the design of laser welding stainless steel railway vehicles structure and the development of non-destructive testing technology were systematically studied before lap laser welding process to be applied in manufacture of railway vehicles. The results of the experiments and study show that high-quality surface state and higher fatigue strength can be achieved by the partial penetration overlap laser welding of the side panel structure, and the structure strength of the car body can be higher than the requirements of En12663, the standard of structural requirements of railway vehicles bodies. Our company has produced the stainless steel subway and high way railway vehicles by using overlap laser welding technology. The application of lap laser welding will be a big

  1. The Political Psychology of European Integration

    DEFF Research Database (Denmark)

    Manners, Ian James

    2015-01-01

    express for the EU and fellow Europeans, and the passion with which supporters of the EU argue for greater integration and enlargement are today central to understanding European integration. Being mindful of Europe - reflecting on the ways in which psychology and politics are deeply implicated in under......In an era of European crises over political legitimacy, economic austerity, and collapse of confidence in the EU the topic of European integration has be-come a very emotional subject. The anger which protestors demonstrate against economic austerity, the hate which nationalist far-right parties...

  2. The laser thermonuclear fusion

    International Nuclear Information System (INIS)

    Coutant, J.; Dautray, R.; Decroisette, M.; Watteau, J.P.

    1987-01-01

    Principle of the thermonuclear fusion by inertial confinement: required characteristics of the deuterium-tritium plasma and of the high power lasers to be used Development of high power lasers: active media used; amplifiers; frequency conversion; beam quality; pulse conditioning; existing large systems. The laser-matter interaction: collision and collective interaction of the laser radiation with matter; transport of the absorbed energy; heating and compression of deuterium-tritium; diagnoses and their comparison with the numerical simulation of the experiment; performances. Conclusions: difficulties to overcome; megajoule lasers; other energy source: particles beams [fr

  3. Characteristics of Schottky-barrier source/drain metal-oxide-polycrystalline thin-film transistors on glass substrates

    International Nuclear Information System (INIS)

    Jung, Seung-Min; Cho, Won-Ju; Jung, Jong-Wan

    2012-01-01

    Polycrystalline-silicon (poly-Si) Schottky-barrier thin-film transistors (SB-TFTs) with Pt-silicided source /drain junctions were fabricated on glass substrates, and the electrical characteristics were examined. The amorphous silicon films on glass substrates were converted into high-quality poly-Si by using excimer laser annealing (ELA) and solid phase crystallization (SPC) methods. The crystallinity of poly-Si was analyzed by using scanning electron microscopy, transmission electron microscopy, and X-ray diffraction analysis. The silicidation process was optimized by measuring the electrical characteristics of the Pt-silicided Schottky diodes. The performances of Pt-silicided SB-TFTs using poly-Si films on glass substrates and crystallized by using ELA and SPC were demonstrated. The SB-TFTs using the ELA poly-Si film demonstrated better electrical performances such as higher mobility (22.4 cm 2 /Vs) and on/off current ratio (3 x 10 6 ) and lower subthreshold swing value (120 mV/dec) than the SPC poly-Si films.

  4. The future of European health policies.

    Science.gov (United States)

    Koivusalo, Meri Tuulikki

    2005-01-01

    The role of the European Union in health policies is changing. The European social model is under threat due to shifts in E.U. policies on liberalization of service provision, limited public budgets, a focus on the health sector as a productive sector in the context of broader European policies and the Lisbon strategy, and changes in the context of the new Constitutional Treaty. These changes are evident in a new reflection paper on European health strategy and its focus. E.U. health policies are at a critical juncture. The danger is that the current processes will lead European health policies and the health systems of member states more in the direction of U.S. health policies and the commercialization of health systems than toward improvement of the current situation.

  5. Report from the 2012 European Gender Summit

    CERN Document Server

    European Gender Summit, 2012

    2012-01-01

    Report from the 2012 European Gender Summit to the European Parliament and the Council, the European Commission, the Council of Europe, EU Member and Associate States, Science Institutions. Developing Systematic Implementation Strategy to Advance EU Policy on Gender Equality in Science, as part of HORIZON 2020, European Research Area and Innovation Union.

  6. German Quality in the Service of a European Public Sphere? An Analysis of the Deutsche Welle’s European Journal program

    Directory of Open Access Journals (Sweden)

    Oana Ludmila Popescu

    2015-04-01

    Full Text Available The economic crisis of the European Union has rendered the European public sphere as a forever emerging concept marked by uncertainties regarding its structure. In this context, eyes of both European officials and citizens turn towards the media, the main communication link between the EU and its citizens. The present paper looks at a media product that is designed to permeate multiple national public spheres, the weekly news show European Journal, a half-hour TV program produced by Deutsche Welle and rebroadcast by partner TV channels throughout Europe. Considering the main characteristics of the European public sphere as identified in the literature, with a focus on horizontal Europeanization, and using the method of content analysis, this paper looks at the means employed by the European Journal to support the integration process and to add a European dimension to national public sphere. Findings suggest that the type of public sphere promoted by the European Journal is not centered around the EU as a distinct entity, but around the member states, approach which supports the idea of a horizontal Europeanization.

  7. European energy policy: the green book

    International Nuclear Information System (INIS)

    Anon.

    2006-01-01

    Energy dependence, insecurity of supplies, rise of demand and prices, global warming: these are the characteristics of the energy situation of the 21. century. The new green book of the European Commission about 'a European strategy for a safe, competitive and durable energy' starts from this alarming status and proposes some suggestions for the building up of a new global European energy policy: realization of the European domestic energy markets (a European energy network, a priority interconnection plan for gas networks, a separation of transport and distribution activities for equitable rules, a reinforcement of the competitiveness of the European industry), a joint security of supplies between member states (redefining the EU position about strategic oil and gas reserves), a sustainable, efficient and diversified energy offer, an integrated approach to fight against global warming (improving energy efficiency, development of renewable energy sources, carbon sequestration), encouraging innovation, developing a consistent foreign policy of energy (a clear policy for the security and diversification of energy supplies, energy partnerships between producers, transit countries and other international actors). (J.S.)

  8. European communion

    DEFF Research Database (Denmark)

    Manners, Ian James

    2013-01-01

    Political theory of European union, through an engagement between political concepts and theoretical understandings, provides a means of identifying the EU as a political object. It is argued that understanding the projects, processes and products of European union, based on ‘sharing’ or ‘communion......’, provides a better means of perceiving the EU as a political object rather than terms such as ‘integration’ or ‘co-operation’. The concept of ‘European communion’ is defined as the ‘subjective sharing of relationships’, understood as the extent to which individuals or groups believe themselves to be sharing...... relations (or not), and the consequences of these beliefs for European political projects, processes and products. By exploring European communion through an engagement with contemporary political theory, using very brief illustrations from the Treaty of Lisbon, the article also suggests that European...

  9. Machine protection for FLASH and the European XFEL

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, Lars

    2009-05-15

    The Free-Electron Laser in Hamburg (FLASH) and the future European X-Ray Free-Electron Laser (XFEL) are sources of brilliant extremeultraviolet and X-ray radiation pulses. Both facilities are based on superconducting linear accelerators (linacs) that can produce and transport electron beams of high average power. With up to 90 kW or up to 600 kW of power, respectively, these beams hold a serious potential to damage accelerator components. This thesis discusses several passive and active machine protection measures needed to ensure safe operation. At FLASH, dark current from the rf gun electron source has activated several accelerator components to unacceptable radiation levels. Its transport through the linac is investigated with detailed tracking simulations using a parallelized and enhanced version of the tracking code Astra; possible remedies are evaluated. Beam losses can lead to the demagnetization of permanent magnet insertion devices. A number of beam loss scenarios typical for FLASH are investigated with shower simulations. A shielding setup is designed and its efficiency is evaluated. For the design parameters of FLASH, it is concluded that the average relative beam loss in the undulators must be controlled to a level of about 10{sup -8}. FLASH is equipped with an active machine protection system (MPS) comprising more than 80 photomultiplier-based beam loss monitors and several subsystems. The maximum response time to beam losses is less than 4 {mu}s. Setup procedures and calibration algorithms for MPS subsystems and components are introduced and operational problems are addressed. Finally, an architecture for a fully programmable machine protection system for the XFEL is presented. Several options for the topology of this system are reviewed, with the result that an availability goal of at least 0.999 for the MPS is achievable with moderate hardware requirements. (orig.)

  10. Machine protection for FLASH and the European XFEL

    International Nuclear Information System (INIS)

    Froehlich, Lars

    2009-05-01

    The Free-Electron Laser in Hamburg (FLASH) and the future European X-Ray Free-Electron Laser (XFEL) are sources of brilliant extremeultraviolet and X-ray radiation pulses. Both facilities are based on superconducting linear accelerators (linacs) that can produce and transport electron beams of high average power. With up to 90 kW or up to 600 kW of power, respectively, these beams hold a serious potential to damage accelerator components. This thesis discusses several passive and active machine protection measures needed to ensure safe operation. At FLASH, dark current from the rf gun electron source has activated several accelerator components to unacceptable radiation levels. Its transport through the linac is investigated with detailed tracking simulations using a parallelized and enhanced version of the tracking code Astra; possible remedies are evaluated. Beam losses can lead to the demagnetization of permanent magnet insertion devices. A number of beam loss scenarios typical for FLASH are investigated with shower simulations. A shielding setup is designed and its efficiency is evaluated. For the design parameters of FLASH, it is concluded that the average relative beam loss in the undulators must be controlled to a level of about 10 -8 . FLASH is equipped with an active machine protection system (MPS) comprising more than 80 photomultiplier-based beam loss monitors and several subsystems. The maximum response time to beam losses is less than 4 μs. Setup procedures and calibration algorithms for MPS subsystems and components are introduced and operational problems are addressed. Finally, an architecture for a fully programmable machine protection system for the XFEL is presented. Several options for the topology of this system are reviewed, with the result that an availability goal of at least 0.999 for the MPS is achievable with moderate hardware requirements. (orig.)

  11. The Evolution of the European Security Policy

    Directory of Open Access Journals (Sweden)

    Vasilica Negrut

    2010-06-01

    Full Text Available The process of development of the European Union’s security dimension has known a spectacular evolution in the past years, passing from political consultation to establishing objectives, then commonactions and positions; at a practical level, the Petersburg measures, carried on initially by the Western European Union as an armed branch of the European Union, have been replaced by actions of implication ofthe Union in managing some conflicts. The Lisbon Treaty confirms the commitments of the member states and mentions the fact that the European Union will dispose of the necessary measures for the defense of its objectives and to contribute to world peace and stability.

  12. European Conference on Laser Interaction with Matter (16th ECLIM), Imperial College, London, 26-30 September 1983. Book of Abstracts.

    Science.gov (United States)

    1983-09-30

    instability by a shaped ion beam M. SAPIR, D. HAVAZALET, Negev, Israel J9 - P Soft X-ray refractometry of laser heated plasmas R. BENATTAR, Ecole...OF STADARDS - ’lS3 - A ,-a J9 SOFT X RAY REFRACTOMETRY OF LASER HEATED PLASMAS R. BENATTAR Laboratoire PMI, Ecole Polytechnique, 91128 Palaiseau...about the more appropriate wavelength to probe the high density region of a laser created plasma by refractometry . After, we show two possibilities, using

  13. Dissemination of European Cinema in the European Union and the International Market

    OpenAIRE

    Wutz, Josef; Pérez, Valentin

    2014-01-01

    This report by Josef Wutz aims to take stock of the dissemination of European films in Europe and in the world from 2002 to 2014. To do so, it takes all those working in the film industry into account: filmmakers, distributors, cinema operators, but also video content providers and public bodies providing funding to films. It focuses on four countries: Germany, Spain, France and Italy. Valentin Pérez then makes recommendations aiming at raising the profile of the European film industry. Fo...

  14. The European Union in International Financial Governance

    Directory of Open Access Journals (Sweden)

    Niamh Moloney

    2017-01-01

    Full Text Available This article considers the role of the European Union in international financial governance after the institutional reforms it undertook in connection with the global financial crisis. It suggests that the new administrative actors that support the governance of the European Union's single financial market, notably the European Supervisory Authorities, have the potential to reshape how the European Union engages with international financial governance. It finds that the European Union’s effectiveness in influencing international financial governance—and the effectiveness of international financial governance more generally—is likely to strengthen as a result.

  15. The european ALARA network

    International Nuclear Information System (INIS)

    Croueail, P.; Lefaure, C.; Croft, J.

    2000-01-01

    Throughout the 1980s and early 1990s the European Commission sponsored projects on the understanding and practical implementation of the ALARA principle. These projects helped ensure that ALARA was integrated into many organisations radiation protection programmes, particularly in the nuclear industry. However there was still much to be done in the non-nuclear sector, as well as for the management of internal exposure. Therefore, the European Commission decided to set up, as of the first January 1996, a European ALARA Network (EAN) whose main goals are to: Further promote ALARA within non nuclear industry, research and the nuclear cycle; Provide a means for feedback experience and the exchange and dissemination of good radiological protection practices in these areas; Initiate proposals for research projects and workshops on topics dealing with optimisation of radiological protection for all types of occupational exposure. The Network has a Steering Committee of experts from 11 countries, with CEPN being the co-ordinator. Twice yearly, the EAN products for the international community a European ALARA Newsletter that reaches several thousand individuals or institutions, mainly in Europe. Each year since 1997, the EAN has organised an ALARA workshop attended by 60 to 80 experts from about ten countries. The first three Workshops were devoted to: ALARA and Decommissioning (1997, Saclay, France), Good Radiation Practices in Industry and Research (1998, Chilton, United Kingdam), and ALARA and Internal Exposure (1999, Munich, Germany). Each of these Workshops gave rise to sets of recommendations to the European Commission which included proposals for further research, modification of regulations, and actions to support feedback experience within the member states. (author)

  16. Room temperature diode laser photoacoustic spectroscopy near 2.3 .mu.m

    Czech Academy of Sciences Publication Activity Database

    Civiš, Svatopluk; Horká-Zelenková, Veronika; Cihelka, Jaroslav; Šimeček, Tomislav; Hulicius, Eduard; Oswald, Jiří; Pangrác, Jiří; Vicet, A.; Rouillard, Y.; Salhi, A.; Alibert, C.; Werner, R.; Koeth, J.

    2005-01-01

    Roč. 81, - (2005), s. 857-861 ISSN 0946-2171 R&D Projects: GA AV ČR IAA4040104; GA MŠk OC 723.001 Grant - others:European Committee(XE) IST-2001-35178 Institutional research plan: CEZ:AV0Z40400503; CEZ:AV0Z10100521 Keywords : laser spectroscopic techniques * absorption * physical chemistry Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.056, year: 2005

  17. Extending the process limits of laser polymer welding with high-brilliance beam sources (recent status and prospects of POLYBRIGHT)

    Science.gov (United States)

    Olowinsky, A.; Boglea, A.

    2011-03-01

    Plastics play an important role in almost every facet of our lives and constitute a wide variety of products, from everyday products such as food and beverage packaging, over furniture and building materials to high tech products in the automotive, electronics, aerospace, white goods, medical and other sectors [1]. The objective of PolyBright, the European Research project on laser polymer welding, is to provide high speed and flexible laser manufacturing technology and expand the limits of current plastic part assembly. New laser polymer joining processes for optimized thermal management in combination with adapted wavelengths will provide higher quality, high processing speed up to 1 m/s and robust manufacturing processes at lower costs. Key innovations of the PolyBright project are fibre lasers with high powers up to 500 W, high speed scanning and flexible beam manipulation systems for simultaneous welding and high-resolution welding, such as dynamic masks and multi kHz scanning heads. With this initial step, PolyBright will break new paths in processing of advanced plastic products overcoming the quality and speed limitations of conventional plastic part assembly. Completely new concepts for high speed processing, flexibility and quality need to be established in combination with high brilliance lasers and related equipment. PolyBright will thus open new markets for laser systems with a short term potential of over several 100 laser installations per year and a future much larger market share in the still growing plastic market. PolyBright will hence establish a comprehensive and sustainable development activity on new high brilliance lasers that will strengthen the laser system industry.

  18. High-power Al-free active region (λ= 852nm) DFB laser diodes for atomic clocks and interferometry applications

    Science.gov (United States)

    Ligeret, V.; Vermersch, F.-J.; Bansropun, S.; Lecomte, M.; Calligaro, M.; Parillaud, O.; Krakowski, M.

    2017-11-01

    Atomic clocks will be used in the future European positioning system Galileo. Among them, the optically pumped clocks provide a better alternative with comparable accuracy for a more compact system. For these systems, diode lasers emitting at 852nm are strategic components. The laser in a conventional bench for atomic clocks presents disadvantages for spatial applications. A better approach would be to realise a system based on a distributed-feedback laser (DFB). We have developed the technological foundations of such lasers operating at 852nm. These include an Al free active region, a single spatial mode ridge waveguide and a DFB structure. The device is a separate confinement heterostructure with a GaInP large optical cavity and a single compressive strained GaInAsP quantum well. The broad area laser diodes are characterised by low internal losses (value of less than 2MHz.

  19. Insights into the European Years’ Communication Toolboxes

    Directory of Open Access Journals (Sweden)

    Camelia-Mihaela Cmeciu

    2012-08-01

    Full Text Available Since 1983 the European syntagm “unity in diversity” has been implemented in the European Years’ communication campaigns. Dependent on subsidiarity and decentralization, European Years focus on a specific issue which constitutes the subject of a year-long awareness campaign. Beyond the involvement of Europe’s citizens through their local, regional and national authorities in the implementation of the European Years’ policies, there is a unity at the level of the visual communication of the EU by two important image-building elements: EY logos and communication toolboxes. The European Years’ communication toolboxes can be considered signs of inclusion since every organization is expected to customize the templates in the official campaign design of the European Year. The analysis will focus on the image-building elements of three European Years (2010, 2011, 2012. Having social semiotics as the qualitative research method and the analytical framework based on the distinction between design resources and representational resources, I will analyze the double layers of the high intensity point of inclusion: (1 the European Years’ branding process; (2 the visual deontic modality within the visual guidelines of the EY communication toolbox.

  20. EFEITOS DA TERAPIA LASER DE BAIXA INTENSIDADE EM MODELO EXPERIMENTAL DE TENDINOPATIA EM RATOS: REVISÃO DE LITERATURA

    Directory of Open Access Journals (Sweden)

    Diego Rodrigues Pessoa

    2017-12-01

    Full Text Available Tendinopatia é o termo utilizado para descrever lesões que afetam os tendões (tendinites e tendinoses, caracterizada pela presença de inflamação e degeneração tecidual, associada à sobrecarga mecânica e a movimentos repetitivos. Diversas modalidades terapêuticas têm sido estudadas no tratamento das tendinopatias, entre elas, destaca-se a terapia a laser de baixa intensidade (TLBI que visa acelerar o processo regenerativo, diminuir a inflamação e reduzir a dor.  Diante do exposto, este trabalho teve como objetivo realizar revisão de literatura, de artigos científicos com foco nos efeitos da terapia a laser de baixa intensidade (TLBI, em modelo experimental de tendinopatia em ratos. O estudo baseou-se na investigação de publicações entre janeiro de 2011 a outubro de 2016, em bases de dados eletrônicas com o emprego dos descritores “tendinopatia”, “laserterapia”, “ratos”, “tendão” e “terapia a laser de baixa intensidade”, combinados aos descritores booleanos. Foram selecionados sete artigos que apontam que a TLBI possibilitou a redução de importantes marcadores pró-inflamatórios, tais como IL-6 e TNF-α, bem como a proliferação aumentada de tenócitos, independentemente da dosagem aplicada. Os estudos científicos selecionados nesta revisão sistemática sinalizaram efeitos positivos da TLBI, principalmente na modulação da resposta inflamatória aguda ou crônica após a indução da tendinopatia.

  1. Digital music consumption on the Internet: Evidence from clickstream data

    OpenAIRE

    Aguiar, Luis; Martens, Bertin

    2016-01-01

    We use clickstream data on a panel of more than 16,500 European consumers to analyze the relationship between different online music consumption channels. In particular, we revisit the question of sales displacement in the digital era, and analyze how licensed online music streaming affects digital music purchasing behavior. Our results show no evidence of digital music sales displacement by unlicensed downloading and present, for some countries in our sample, a rather small but positive elas...

  2. The European Model Company Act

    DEFF Research Database (Denmark)

    Cleff, Evelyne Beatrix

    2011-01-01

    European Company Law regulation is currently undergoing a reform. These reforms raise a number of regulatory questions, such as what should be the aims of companies' legislation, and how these aims should best be met by regulation. Many of the reforms and discussions (both on EU and national level...... an increasing influence on the framing of company legislation, such as the choice between mandatory or default rules. This article introduces the project 'European Company Law and the choice of Regulatory Method' which is carried out in collaboration with the 'European Model Company Act Group'. The project aims...

  3. Generation of ultra-high-pressure shocks by collision of a fast plasma projectile driven in the laser-induced cavity pressure acceleration scheme with a solid target

    Czech Academy of Sciences Publication Activity Database

    Badziak, J.; Rosinski, M.; Krouský, Eduard; Kucharik, M.; Liska, R.; Ullschmied, Jiří

    2015-01-01

    Roč. 22, č. 3 (2015), s. 1-11, č. článku 032709. ISSN 1070-664X R&D Projects: GA MŠk(CZ) LD14089; GA MŠk LM2010014 EU Projects: European Commission(XE) 284464 - LASERLAB-EUROPE Institutional support: RVO:68378271 ; RVO:61389021 Keywords : laser-produced plasma * ultra-high-pressure shocks * laser-induced cavity pressure acceleration Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 2.207, year: 2015

  4. European Research Reloaded : Cooperation and Integration Among Europeanized States

    NARCIS (Netherlands)

    Holzhacker, Ron; Haverland, Markus

    2006-01-01

    European integration has had an ever deepening impact on the member states. The first wave of research concerned the process of institution building and policy developments at the European Union (EU) level. The second wave, on Europeanization used the resulting integration as an explanatory factor

  5. Design of a petawatt optical parametric chirped pulse amplification upgrade of the kilojoule iodine laser PALS

    Czech Academy of Sciences Publication Activity Database

    Novák, Ondřej; Divoký, Martin; Turčičová, Hana; Straka, Petr

    2013-01-01

    Roč. 31, č. 2 (2013), s. 211-218 ISSN 0263-0346 R&D Projects: GA ČR GA202/06/0814; GA MŠk(CZ) LC528; GA MŠk LN00A100 EU Projects: European Commission(XE) 506350 - LASERLAB-EUROPE Institutional support: RVO:68378271 Keywords : VULCAN petawatt * system * prospects * facility * program Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.701, year: 2013 http://journals.cambridge.org/action/displayAbstract?fromPage=online& aid =8950936

  6. Cutting using the CO laser. Trennen mit dem CO-Laser

    Energy Technology Data Exchange (ETDEWEB)

    Maisenhaelder, F.; Stoehr, M. (DLR, Inst. fuer Technische Physik, Stuttgart (Germany))

    1991-02-01

    Several cutting experiments were performed to investigate the maximum cutting speed when using CO or CO{sub 2} laser radiation. The material which was used for these experiments was mild steel (St 37) and stainless steel (V2A; X5CrNi 189), the material thickness varied from 0.5 mm to 4 mm. The cutting parameters, especially the focal power density and the focal diameter, were equal for both laser wavelengths. The experimental result shows an increased cutting speed with CO laser beams in comparison to CO{sub 2} laser beams.

  7. The European XFEL project

    International Nuclear Information System (INIS)

    Floettmann, K.

    2005-01-01

    The European XFEL project is a 4th generation synchrotron radiation facility based on the SASE FEL concept and the superconducting TESLA technology for a linear accelerator. In February 2003 the German government decided that the XFEL should be realized as a European project and be located at DESY in Hamburg. The paper will give an overview of the overall layout and parameters of the facility, with emphasis on the accelerator design, technology and physics. (author)

  8. Programa de atención a pacientes con Esclerosis Lateral Amiotrófica (ELA): Información para el personal sanitario de los Centros de Atención Primaria

    OpenAIRE

    Visús Susín, Daniel

    2013-01-01

    Etimológicamente, esclerosis significa endurecimiento (skerós es "endurecmiento patológico" y osis, "enfermedad") y hace referencia al estado de la médula espinal en las fases avanzadas de la enfermedad. Lateral significa "al lado" y pone de manifiesto la ubicación del daño en la médula espinal. Por último, el término amiotrófica significa "sin nutrición muscular" y se refiere a la pérdida de señales que los nervios envían normalmente a los músculos. La Esclerosis Lateral Amiotrófica (ELA...

  9. Reabilitação psicológica de pacientes com seqüelas da encefalite por arbovirus Psychological rehabilitation of patients with sequelae due to encephalitis caused by arbovirus

    Directory of Open Access Journals (Sweden)

    Anency Giannotti Hallage

    1981-10-01

    Full Text Available Foi investigado o possível comprometimento psíquico de pacientes com seqüelas da encefalite por arbovirus, do litoral sul do Estado de São Paulo (Brasil, com a finalidade de definir o papel do psicólogo, em um programa de reabilitação física e psicossocial. A presença das seqüelas era encarada de forma depreciativa e observou-se que essa percepção comprometeu fundamentalmente a identidade do paciente como ser humano, trazendo uma série de respostas emocionais desadaptadas e impossibibilitando a convivência satisfatória consigo e com o próximo. Os resultados analisados, em seu aspecto psicossociológico, revelaram que as dificuldades psíquicas observadas eram originárias da maneira como a deficiência física é encarada no meio social.The possibility of psychological damage in patients with sequelae from encephalitis caused by arbovirus in the southern section of the coastal area of the State of S. Paulo (Brazil was investigated for the purpose of defining the role of the psychologist in a programme of physical and psychosocial rehabilitation. The presence of the sequelae was regarded depreciatively by the patients and this attitude affected their self-regard as human beings. The result was a series of emotional maladjustments which made it impossible for the patients to live with themselves or maintain a satisfactory relationship with others. The results analyzed from a psychosocial standpoint revealed that the psychological problems observed arose from the way in which the physical deficiency is regarded within the social context.

  10. Quality Evaluation of the Traditional Medicine Majun Mupakhi ELA via Chromatographic Fingerprinting Coupled with UHPLC-DAD-Quadrupole-Orbitrap-MS and the Antioxidant Activity In Vitro.

    Science.gov (United States)

    Reheman, Ayinuer; Aisa, Haji Akber; Ma, Qing Ling; Nijat, Dilaram; Abdulla, Rahima

    2018-01-01

    By merging a high-performance liquid chromatography diode array detector (HPLC-DAD) method with high-performance thin-layer chromatography (HPTLC), an assay was developed for chemical fingerprinting and quantitative analysis of traditional medicine Majun Mupakhi ELA (MME), and constituent compounds were identified using HPLC coupled with UHPLC-DAD-Quadrupole-Orbitrap-MS method. In addition, the antioxidant capacity of MME was assessed based on the ability of components to scavenge radicals using in vitro method. Using a HPLC-DAD method with HPTLC easily validated the chemical fingerprinting results and quantified three characteristic components, namely, gallic acid (1), daidzein (2), and icariin (3), in commercial MMEs. The three compounds presented excellent regression values ( R 2 = 0.9999) in the ranges of the test and the method recovery was in the range from 100.49% to 100.68%. The fingerprints had 27 common characteristic peaks, of which 13 were verified by rapid UHPLC-DAD-Q-Orbitrap-MS analysis. In vitro antioxidant assays rapidly assessed and contrasted antioxidant activity or the free radical scavenging activity of the main polyphenolic classes in MMEs, and the antioxidant capacity was mostly affected by the presence of gallic acid. Thus, this study establishes a powerful and meaningful approach for MME quality control and for assessing in vitro antioxidant activity.

  11. The EIROforum Collaboration Agreement with the European Union

    CERN Document Server

    2003-01-01

    Collaboration between CERN and the European Union has extended over many years, and the European Commission were granted Observer Status in the CERN Council in 1985 already. In 1994, an Administrative Arrangement was signed between CERN's Director-General, Professor C.H. Llewellyn Smith, and the Commissioner of the European Communities, Professor Antonio Ruberti, "to promote co-operation between the Commission of the European Communities and CERN in research and technological development". (See Annex I). In 2000, the EIROforum was set up composed of the Directors-General of the seven organisations - CERN, EFDA, EMBL, ESA, ESO, ESRF and ILL - whom now meet regularly twice per year. More information is available at the Web site www.eiroforum.org. On 27 October 2003, the EIROforum members signed a joint "Statement of Intent" with the European Commission, represented by Commissioner Philippe Busquin, confirming their common commitment to developing the European Research Area. The goal is to work together to estab...

  12. Demographics of the European apicultural industry.

    Science.gov (United States)

    Chauzat, Marie-Pierre; Cauquil, Laura; Roy, Lise; Franco, Stéphanie; Hendrikx, Pascal; Ribière-Chabert, Magali

    2013-01-01

    Over the last few years, many European and North American countries have reported a high rate of disorders (mortality, dwindling and disappearance) affecting honeybee colonies (Apis mellifera). Although beekeeping has become an increasingly professional activity in recent years, the beekeeping industry remains poorly documented in Europe. The European Union Reference Laboratory for Honeybee Health sent a detailed questionnaire to each Member State, in addition to Kosovo and Norway, to determine the demographics and state of their beekeeping industries. Based on data supplied by the National Reference Laboratory for honeybee diseases in each European country, a European database was created to describe the beekeeping industry including the number and types of beekeepers, operation size, industry production, and health (notifiable diseases, mortalities). The total number of beekeepers in Europe was estimated at 620,000. European honey production was evaluated at around 220,000 tons in 2010. The price of honey varied from 1.5 to 40 €/kg depending on the country and on the distribution network. The estimated colony winter mortality varied from 7 to 28% depending on the country and the origin of the data (institutional survey or beekeeping associations). This survey documents the high heterogeneity of the apicultural industry within the European Union. The high proportion of non-professional beekeepers and the small mean number of colonies per beekeeper were the only common characteristics at European level. The tremendous variation in European apicultural industries has implication for any comprehensive epidemiological or economic analysis of the industry. This variability needs to be taken into account for such analysis as well as for future policy development. The industry would be served if beekeeping registration was uniformly implemented across member states. Better information on the package bee and queen production would help in understanding the ability of

  13. Laser Safety Evaluation of the MILES and Mini MILES Laser Emitting Components; TOPICAL

    International Nuclear Information System (INIS)

    AUGUSTONI, ARNOLD L.

    2002-01-01

    Laser safety evaluation and output emission measurements were performed (during October and November 2001) on SNL MILES and Mini MILES laser emitting components. The purpose, to verify that these components, not only meet the Class 1 (eye safe) laser hazard criteria of the CDRH Compliance Guide for Laser Products and 21 CFR 1040 Laser Product Performance Standard; but also meet the more stringent ANSI Std. z136.1-2000 Safe Use of Lasers conditions for Class 1 lasers that govern SNL laser operations. The results of these measurements confirmed that all of the Small Arms Laser Transmitters, as currently set (''as is''), meet the Class 1 criteria. Several of the Mini MILES Small Arms Transmitters did not. These were modified and re-tested and now meet the Class 1 laser hazard criteria. All but one System Controllers (hand held and rifle stock) met class 1 criteria for single trigger pulls and all presented Class 3a laser hazard levels if the trigger is held (continuous emission) for more than 5 seconds on a single point target. All units were Class 3a for ''aided'' viewing. These units were modified and re-tested and now meet the Class 1 hazard criteria for both ''aided'' as well as ''unaided'' viewing. All the Claymore Mine laser emitters tested are laser hazard Class 1 for both ''aided'' as well as ''unaided'' viewing

  14. Mitterrand and the Great European Design—From the Cold War to the European Union

    Directory of Open Access Journals (Sweden)

    Troitiño David Ramiro

    2017-10-01

    Full Text Available François Mitterrand had a leading role in directing the course for the European integration process. While he orchestrated the economic integration of Europe, he remained deeply opposed to further political integration within the Communities. This article researches Mitterrand’s rationale for his clear focus on economic affairs and develops his vision for the institutional setting of the European Union (EU. The focus of the article is allocated to four different perspectives that reflect the four pillars of Mitterrand’s European policy: the common currency, the establishment of a closely integrated and small Western European based EU, the development of the Social Europe and of a free trade area between Europe and Africa. It is argued that although EU institutions have been established based on Mitterrand’s design, today’s reality deviates from the conditions on which his plan was based. For Mitterrand, the ideal EU involved a deep-rooted Western Europe with France at its core and a loose association with Central and Eastern Europe. His perception resembles the current discussions of multi-speed Europe and the determination of France and Germany to proceed to the next stage of the integration process. Importantly, Mitterrand’s print can still be recognised in the EU’s social policy included in the treaties, yet still far from being implemented. Notably, like all of the French Presidents, Mitterrand developed a design for Africa in which an extensive free trade area between Europe and former French colonies were to be established. In this proposal, Germany was to be assigned the part of the economic engine behind the actualisation of the proposal, while France was to carry out the role of a required middle man of the transactions. To further assure France’s political predominance over the Communities, Mitterrand designed a common currency for a small number of homogenous Western-European states.

  15. The European Judicial Training Network and its Role in the Strategy for the Europeanization of National Judges

    Directory of Open Access Journals (Sweden)

    Simone Benvenuti

    2015-07-01

    Full Text Available This article addresses the building of a European Judicial Training Framework (EJT, notably the establishment, organization and functioning of the European Judicial Training Network (EJTN. After describing the EJTN and retracing its distinctive features – co-operation, decentralization, complementarity, targeting –, the article underlines its peculiar function within EJT, which reflects the role of EJT itself in the strategy for Europeanization of national judges. It then concludes by pointing out and situating other strategic areas where important synergies with EJT for the purpose of judicial Europeanization can be strengthened, notably enhancement of transnational judicial networks and introduction of knowledge management tools in national systems. The article is based on the analysis of documents and scientific literature as well as on empirical research and semi-structured interviews conducted by the author in 2013 and 2014.

  16. Matlab fractal techniques used to study the structural degradation caused by alpha radiation to laser mirrors

    Science.gov (United States)

    Ioan, M.-R.

    2018-01-01

    Almost all optical diagnostic systems associated with classical particle accelerators or with new state-of-the-art particle accelerators, such as those developed within the European Collaboration ELI-NP (Extreme Light Infrastructure-Nuclear Physics) (involving extreme power laser beams), contain in their infrastructure high quality laser mirrors, used for their reflectivity and/or their partial transmittance. These high quality mirrors facilitate the extraction and handling of optical signals. When optical mirrors are exposed to high energy ionizing radiation fields, their optical and structural properties will change over time and their functionality will be affected, meaning that they will provide imprecise information. In some experiments, being exposed to mixed laser and accelerated particle beams, the deterioration of laser mirrors is even more acute, since the destruction mechanisms of both types of beams are cumulated. The main task of the work described in this paper was to find a novel specific method to analyse and highlight such degradation processes. By using complex fractal techniques integrated in a MATLAB code, the effects induced by alpha radiation to laser mirrors were studied. The fractal analysis technique represents an alternative approach to the classical Euclidean one. It can be applied for the characterization of the defects occurred in mirrors structure due to their exposure to high energy alpha particle beams. The proposed method may be further integrated into mirrors manufacturing process, as a testing instrument, to obtain better quality mirrors (enhanced resistance to high energy ionizing beams) by using different types of reflective coating materials and different deposition techniques. Moreover, the effect of high energy alpha ionizing particles on the optical properties of the exposed laser mirrors was studied by using spectrophotometric techniques.

  17. European MEDIA Programme: the role of 'language' and 'visual images' in the processes of constructing European culture and identity.

    Science.gov (United States)

    Bozić-Vrbancić, Senka; Vrbancić, Mario; Orlić, Olga

    2008-12-01

    Questions of diversity and multiculturalism are at the heart of many discussions on European supranational identity within contemporary anthropology, sociology, cultural studies, linguistics and so on. Since we are living in a period marked by the economic and political changes which emerged after European unification, a call for a new analysis of heterogeneity, cultural difference and issues of belonging is not surprising. This call has been fuelled by the European Union's concern with "culture" as one of the main driving forces for constructing "European identity". While the official European policy describes European culture as common to all Europeans, Europe is also-seen as representing "unity in diversity". By analysing contemporary European MEDIA policies and programs this article attempts to contribute to a small but growing body of work that explores what role "language" and "visual images" play in the process of constructing European culture and supranational European identity. More specifically, the article explores the complex articulation of language and culture in order to analyse supranational imaginary of European identity as it is expressed through the simple slogan "Europe: unity in diversity". We initially grounded our interest in the politics of identity within the European Union within theoretical frameworks of "power and knowledge" and "identity and subjectivity". We consider contemporary debates in social sciences and humanities over the concepts of language", "culture" and "identity" as inseparable from each other (Ahmed 2000; Brah 1996, 2000; Butler 1993, Derrida 1981; Gilroy 2004; Laclau 1990). Cultural and postcolonial studies theorists (e.g. Brah 1996; Bhabha 1994; Hall 1992, 1996, among others) argue that concepts of "culture" and "identity" signify a historically variable nexus of social meanings. That is to say, "culture" and "identity" are discursive articulations. According to this view, "culture" and "identity" are not separate

  18. The way ahead through European collaboration

    International Nuclear Information System (INIS)

    Vaughan, R.D.

    1987-01-01

    The paper on the ''Way ahead through European Collaboration'' was presented to the seminar on ''European commercial fast reactor programme'', London, 1987. A description is given of the world energy consumption, world nuclear energy consumption, and uranium resources. It is suggested that the fast reactor is likely to be developed first in Western Europe, and more particularly in the European Economic Community. Collaboration in Europe has taken a positive step forward with the decision of the European Fast Reactor Utilities Group to open a dialogue with the design and construction companies, working together. The companies are invited to prepare jointly a new design for a demonstration fast reactor to be ordered in the early 1990's. (U.K.)

  19. The European Crisis Management: An Organizational Narrative

    OpenAIRE

    Patrícia Kaplánová

    2016-01-01

    The debate of scholars in the field of international relations in last years has put the European Union’s role into the consideration. The European Foreign and Security Policy has positioned itself through its development to the constructive and normative line of research of world politics. With this respect, this article examines a character of crisis management of the European Common Foreign Policy based on the institutional development. Besides the European Union does not po...

  20. FROM THE HISTORY OF LASER CREATION

    Directory of Open Access Journals (Sweden)

    I.M. Belousova

    2014-03-01

    Full Text Available The paper briefly describes the history of formation of a new science direction - quantum electronics, associated with the discovery of masers and lasers by scientists from the USA (Ch. Townes and the USSR (N.G. Basov and A. M. Prokhorov. The world's first ruby laser designed by T. Maiman is described. Some historical events devoted to creation and research of lasers are given in which the author of the paper as well as research workers from Vavilov State Optical Institute, ITMO University and LOMO have taken direct part in the development of solid-state and gas lasers (helium-neon, photodissociation, CO2-lasers and laser optical systems. Contribution of researchers from Vavilov State Optical Institute, LOMO and ITMO University to large-scale programs on development of lasers for laser nuclear fusion, laser weapons and “Phobos” program is shown. The paper deals in brief with new issues of development and application of lasers, mainly, within the project of laser orbital space station of the future, for the conversion of solar energy into laser radiation. Description of idea of solar energy transformation by fullerene-oxygen laser is presented. The patent for it has been taken out by Vavilov State Optical Institute. Developed fullerene-oxygen-iodine laser and laser structure models for industrial applications and solar energy conversion into laser radiation are described. Parameters for hypothetical laser-optical system of the future space station are given.

  1. European Counterpublics? DiEM25, Plan B and the Agonistic European Public Sphere

    DEFF Research Database (Denmark)

    Agustin, Oscar Garcia

    2017-01-01

    After the negotiations between the Syriza government and the European Union (EU), the European Left faced the dilemma of which kind of progressive Europe could be developed within the existing EU framework. Two initiatives were launched to foster an alternative Europe after the Greek crisis: ‘A...... Plan B in Europe’ (Plan B) and the Democracy in Europe Movement 2025 (DiEM25). These initiatives emerged to promote a new European project as a rejection of EU austerity policies and lack of democracy. The shaping of alternatives is understood within the framework of the public sphere...

  2. Time differentiated nuclear resonance spectroscopy coupled with pulsed laser heating in diamond anvil cells

    Energy Technology Data Exchange (ETDEWEB)

    Kupenko, I., E-mail: kupenko@esrf.fr; Strohm, C. [Bayerisches Geoinstitut, Universität Bayreuth, D-95440 Bayreuth (Germany); ESRF-The European Synchrotron, CS 40220, 38043 Grenoble Cedex 9 (France); McCammon, C.; Cerantola, V.; Petitgirard, S.; Dubrovinsky, L. [Bayerisches Geoinstitut, Universität Bayreuth, D-95440 Bayreuth (Germany); Glazyrin, K. [Photon Science, DESY, D-22607 Hamburg (Germany); Vasiukov, D.; Aprilis, G. [Laboratory of Crystallography, Material Physics and Technology at Extreme Conditions, Universität Bayreuth, D-95440 Bayreuth (Germany); Chumakov, A. I.; Rüffer, R. [ESRF-The European Synchrotron, CS 40220, 38043 Grenoble Cedex 9 (France)

    2015-11-15

    Developments in pulsed laser heating applied to nuclear resonance techniques are presented together with their applications to studies of geophysically relevant materials. Continuous laser heating in diamond anvil cells is a widely used method to generate extreme temperatures at static high pressure conditions in order to study the structure and properties of materials found in deep planetary interiors. The pulsed laser heating technique has advantages over continuous heating, including prevention of the spreading of heated sample and/or the pressure medium and, thus, a better stability of the heating process. Time differentiated data acquisition coupled with pulsed laser heating in diamond anvil cells was successfully tested at the Nuclear Resonance beamline (ID18) of the European Synchrotron Radiation Facility. We show examples applying the method to investigation of an assemblage containing ε-Fe, FeO, and Fe{sub 3}C using synchrotron Mössbauer source spectroscopy, FeCO{sub 3} using nuclear inelastic scattering, and Fe{sub 2}O{sub 3} using nuclear forward scattering. These examples demonstrate the applicability of pulsed laser heating in diamond anvil cells to spectroscopic techniques with long data acquisition times, because it enables stable pulsed heating with data collection at specific time intervals that are synchronized with laser pulses.

  3. The Impact of European Economic Integration on Migration in the European Union

    Directory of Open Access Journals (Sweden)

    Simionescu Mihaela

    2018-05-01

    Full Text Available The recent enlargement of the EU (since 2004 and the United Kingdom's decision to leave the European Union have prompted a growing research interest in the political and academic environment because of the causes and consequences of migration between the CEE countries and those in the Western Europe. In this study, the effects of European economic integration on the number of EU-15 immigrants from the newly integrated EU countries were assessed by econometric techniques. According to panel data models, in the period 2000-2015, the number of migrants from the new member states of the EU has increased, in average, with more than 2200 people only due to their EU membership. This result reflects the positive impact of European economic integration on the number of emigrants from the CEE countries that chose the EU-15 states as destination countries. Moreover, according to some ridge Bayesian regressions, during the period 2004-2015, the EU-15 immigrants coming from the EU-13 states did not negatively affect the economic growth of the EU-15 countries.

  4. Improvements of the ruby laser oscillator system for laser scattering

    International Nuclear Information System (INIS)

    Yamauchi, Toshihiko; Kumagai, Katsuaki; Kawakami, Tomohide; Matoba, Tohru; Funahashi, Akimasa

    1978-10-01

    A ruby laser oscillator system is used to measure electron temperatures of the Tokamak plasmas(JFT-2 and JFT-2a). Improvements have been made of the laser oscillator to obtain the correct values. Described are the improvements and the damages of a ruby rod and a KD*P crystal for Q-switching by laser beam. Improvement are the linear Xe lamp replaced by a helical Xe lamp and in the electrical circuit for Q-switching. The damage of an optical component by a laser beam should be clarified from the damage data; the cause is not found yet. (author)

  5. The European Union, the ESDP, and the question of Turkey /

    OpenAIRE

    Taylor, Alistair

    2005-01-01

    This paper analyses the potential contribution in terms of crude capabilities that Turkey could bring to the European Union’s ESDP security framework. The history of the European Union’s security aspirations and the security policy preferences of the major actors in European security will also be examined as a way of framing the question of Turkey's potential role within the emerging European security and defense framework. The second chapter will look at how European security has evolved fro...

  6. Laser safety in the lab

    CERN Document Server

    Barat, Ken L

    2012-01-01

    There is no more challenging setting for laser use than a research environment. In almost every other setting the laser controls count on engineering controls, and human exposure is kept to a minimum. In research, however, the user often manipulates the optical layout and thereby places him or herself in peril, but this does not mean that accidents and injury are unavoidable. On the contrary, laser accidents can be avoided by following a number of simple approaches. [i]Laser Safety in the Lab[/i] provides the laser user and laser safety officer with practical guidelines from housekeeping to ey

  7. EPERC: The European Pressure Equipment Research Council

    International Nuclear Information System (INIS)

    Darlaston, J.; McAllister, S.

    1998-01-01

    The European Pressure Equipment Research Council (EPERC) is a European Network of industries, research laboratories, inspection bodies and governmental institutions set up to foster co-operative research for the greater benefit of the European industry. The concept of a European Research Council originated at the PVRC meeting in Cannes in 1989 and since this time volunteers from the industry, research laboratories and of the European Commission Joint Research Centre, Petten have worked together to create a Statute for EPERC. In the context of the pressure equipment industry, the creation of EPERC is extremely pertinent, since in the near future, a Council directive on pressure equipment will replace the existing national regulations. In parallel to this, work is in progress for the elaboration of European Standards. It is useful to recall that ''Harmonised Standards'' will be the privileged means of complying with the Essential Safety Requirements of the directive. (author)

  8. Recent laser experiments on the Aurora KrF/ICF laser system

    International Nuclear Information System (INIS)

    Turner, T.P.; Jones, J.E.; Czuchlewski, S.J.; Watt, R.G.; Thomas, S.J.; Kang, M.; Tallman, C.R.; Mack, J.M.; Figueira, J.F.

    1990-01-01

    The Aurora KrF/ICF Laser Facility at Los Alamos is operational at the kilojoule-level for both laser and target experiments. We report on recent laser experiments on the system and resulting system improvements. 3 refs., 4 figs

  9. Pulsed laser facilities operating from UV to IR at the Gas Laser Lab of the Lebedev Institute

    Science.gov (United States)

    Ionin, Andrei; Kholin, Igor; Vasil'Ev, Boris; Zvorykin, Vladimir

    2003-05-01

    Pulsed laser facilities developed at the Gas Lasers Lab of the Lebedev Physics Institute and their applications for different laser-matter interactions are discussed. The lasers operating from UV to mid-IR spectral region are as follows: e-beam pumped KrF laser (λ= 0.248 μm) with output energy 100 J; e-beam sustained discharge CO2(10.6 μm) and fundamental band CO (5-6 μm) lasers with output energy up to ~1 kJ; overtone CO laser (2.5-4.2 μm) with output energy ~ 50 J and N2O laser (10.9 μm) with output energy of 100 J; optically pumped NH3 laser (11-14 μm). Special attention is paid to an e-beam sustained discharge Ar-Xe laser (1.73 μm ~ 100 J) as a potential candidate for a laser-propulsion facility. The high energy laser facilities are used for interaction of laser radiation with polymer materials, metals, graphite, rocks, etc.

  10. Eigenmode compendium of the third harmonic module of the European X-ray Free Electron Laser

    CERN Document Server

    Flisgen, Thomas; Galek, Tomasz, Rostock Universitaet; Shi, Liangliang; Joshi, Nirav; Baboi, Nicoletta; Jones, Roger M; van Rienen, Ursula

    2017-01-01

    Chains of superconducting radio-frequency resonators are key components of modern particle accelerators such as the European XFEL, which is currently under construction in the north of Germany. In addition to the accelerating mode of the resonators, their beam excited higher order modes are of special interest, because they can harm the beam quality. In contrast to the accelerating mode, these modes are in general not confined within single resonators of the cavity string. For instance, eigenmodes can be localized between adjacent cavities or can be distributed along the entire chain of cavities. Therefore, the full chain has to be considered for a reasonable investigation of its resonant spectra. Accounting for such complex structures is computationally challenging and is therefore often avoided. In this article, the challenge is faced by using the so-called state-space concatenation approach, which is a combination of domain decomposition and model-order reduction. The technique allows for a reduction of th...

  11. The Application of Cryogenic Laser Physics to the Development of High Average Power Ultra-Short Pulse Lasers

    Directory of Open Access Journals (Sweden)

    David C. Brown

    2016-01-01

    Full Text Available Ultrafast laser physics continues to advance at a rapid pace, driven primarily by the development of more powerful and sophisticated diode-pumping sources, the development of new laser materials, and new laser and amplification approaches such as optical parametric chirped-pulse amplification. The rapid development of high average power cryogenic laser sources seems likely to play a crucial role in realizing the long-sought goal of powerful ultrafast sources that offer concomitant high peak and average powers. In this paper, we review the optical, thermal, thermo-optic and laser parameters important to cryogenic laser technology, recently achieved laser and laser materials progress, the progression of cryogenic laser technology, discuss the importance of cryogenic laser technology in ultrafast laser science, and what advances are likely to be achieved in the near-future.

  12. An economic analysis of the European commission’s proposal for a European account

    Directory of Open Access Journals (Sweden)

    Nicolas Kyriakides

    2013-12-01

    Full Text Available This paper performs an economic analysis of the European Commission’s proposal for a European-wide preservation order. Bentham’s utilitarianism theory suggests that legislators must take into mind the pleasures and pains associated with any legislation and to form laws in order to create the greatest good for the greatest number. These ideas are reflected in the modern economic theories of welfare economics. But are these principles sufficient to create effective legal rules and achieve justice? Section 2 of this work analyzes the difficulties in obtaining a provisional measure to preserve another party’s assets in another Member State of the European Union (“EU”. Section 3 sets out the Commission’s proposal for a European Account Preservation Order (“EAPO”. Section 4 applies welfare economics principles in order to identify the effect of legal rules related to this proposal, while it proposes an alternative approach to these principles. Lastly, section 4 makes suggestions on the proposal based on this alternative approach.

  13. The high-power iodine laser

    Science.gov (United States)

    Brederlow, G.; Fill, E.; Witte, K. J.

    The book provides a description of the present state of the art concerning the iodine laser, giving particular attention to the design and operation of pulsed high-power iodine lasers. The basic features of the laser are examined, taking into account aspects of spontaneous emission lifetime, hyperfine structure, line broadening and line shifts, stimulated emission cross sections, the influence of magnetic fields, sublevel relaxation, the photodissociation of alkyl iodides, flashlamp technology, excitation in a direct discharge, chemical excitation, and questions regarding the chemical kinetics of the photodissociation iodine laser. The principles of high-power operation are considered along with aspects of beam quality and losses, the design and layout of an iodine laser system, the scalability and prospects of the iodine laser, and the design of the single-beam Asterix III laser.

  14. Laser Safety and Hazard Analysis for the Trailer (B70) Based AURA Laser System

    International Nuclear Information System (INIS)

    AUGUSTONI, ARNOLD L.

    2003-01-01

    A laser safety and hazard analysis was performed for the AURA laser system based on the 2000 version of the American National Standards Institute's (ANSI) Standard Z136.1, for ''Safe Use of Lasers'' and the 2000 version of the ANSI Standard Z136.6, for ''Safe Use of Lasers Outdoors''. The trailer based AURA laser system is a mobile platform, which is used to perform laser interaction experiments and tests at various national test sites. The trailer (B70) based AURA laser system is generally operated on the United State Air Force Starfire Optical Range (SOR) at Kirtland Air Force Base (KAFB), New Mexico. The laser is used to perform laser interaction testing inside the laser trailer as well as outside the trailer at target sites located at various distances from the exit telescope. In order to protect personnel, who work inside the Nominal Hazard Zone (NHZ), from hazardous laser emission exposures it was necessary to determine the Maximum Permissible Exposure (MPE) for each laser wavelength (wavelength bands) and calculate the appropriate minimum Optical Density (OD min ) of the laser safety eyewear used by authorized personnel and the Nominal Ocular Hazard Distance (NOHD) to protect unauthorized personnel who may have violated the boundaries of the control area and enter into the laser's NHZ

  15. The European Trauma Course (ETC) and the team approach

    DEFF Research Database (Denmark)

    Lott, Carsten; Araujo, Rui; Cassar, Mary Rose

    2009-01-01

    The European Trauma Course (ETC) was officially launched during the international conference of the European Resuscitation Council (ERC) in 2008. The ETC was developed on behalf of ESTES (European Society of Trauma and Emergency Surgery), EuSEM (European Society of Emergency Medicine), the ESA...... (European Society of Anaesthesiology) and the ERC. The objective of the ETC is to provide an internationally recognised and certified life support course, and to teach healthcare professionals the key principles of the initial care of severely injured patients. Its core elements, that differentiates it from...

  16. The European chart of territorial planning

    International Nuclear Information System (INIS)

    1998-01-01

    In this chapter the European chart of territorial planning is included. This European chart contains next chapters: Introduction; The mission of the territorial planning; The basic aims; Realization of aims of the territorial planning; The confirmation of the European co-operation. In the Appendix the Specific aims: (1) The village territory; (2) The urban territory; (3) The boundary territory; (4) The mountain territory; (5) The structurally weak territory; (6) The decaying territory; (7) The coastal territories and islands

  17. The argon excimer laser

    International Nuclear Information System (INIS)

    Wrobel, W.G.

    1981-02-01

    The electron-beam-pumped argon eximer laser is investigated and tuned for the first time. The electron beam is generated by means of an improved coaxial field emmision diode in which argon gas is excited with power densities of 0.3 GW/cm 3 for 18 ns. The processes in the excited gas of 20 to 65 bar are described in the context of a kinetic model as a sequence of stationary states. Investigations of the amplified spontaneous emission (superfluorescence) confirm the predictions of this model. Only the absorption due to the excited Ar atoms is anomalously high. Reproducible operation of the argon eximer laser was achieved in a wide pressure range with various resonator arrangements. The wavelength of this shortest wavelength of this shortest wavelength excimer laser is 126 nm, the laser line width approx. 1.7 nm, the pulse length 7 to 13 ns, and the laser power 250 kW. The laser emission is tuned from 123.2 nm to 128.4 nm by two different methods (diffraction grating and prism). This tunable laser is thus the one with the shortest wavelength at present. Its line width is 0.25 to 0.4 nm, and the power ue 1.7 kW. (orig.)

  18. European PV industry -- The future beckons

    International Nuclear Information System (INIS)

    Shah, D.J.

    1994-01-01

    The author believes that there are reasons to believe that the solar industry is poised on the brink of rapid commercial growth, leading to broadly-based industry viability. The author discusses the role that the European solar industry has to play in helping to bring about a better future. He begins his discussion with the current state of the European industry and follows with recommendations of what the European industry should be doing to encourage the solar industry growth

  19. IDENTITY AND THE EUROPEAN UNION

    Directory of Open Access Journals (Sweden)

    Abrudan Cristina

    2008-05-01

    Full Text Available The purpose of this article is to throw some light on the question of identity in the European Union. The challenge is to understand how identity formation takes place in the contemporary world. The European integration has to be understood both as a process of socio-economic convergence among European states but also as a process of co-operation on different other levels, too. It seems that cultures, traditions and interests are more and more interconnected as societies become increasingly multicultural. This is the reason why people are concerned with the concept of identity and the recognition of their uniqueness in terms of traditions, values and ways of lives.

  20. Measurement of the emission spectrum of a semiconductor laser using laser-feedback interferometry.

    Science.gov (United States)

    Keeley, James; Freeman, Joshua; Bertling, Karl; Lim, Yah L; Mohandas, Reshma A; Taimre, Thomas; Li, Lianhe H; Indjin, Dragan; Rakić, Aleksandar D; Linfield, Edmund H; Davies, A Giles; Dean, Paul

    2017-08-03

    The effects of optical feedback (OF) in lasers have been observed since the early days of laser development. While OF can result in undesirable and unpredictable operation in laser systems, it can also cause measurable perturbations to the operating parameters, which can be harnessed for metrological purposes. In this work we exploit this 'self-mixing' effect to infer the emission spectrum of a semiconductor laser using a laser-feedback interferometer, in which the terminal voltage of the laser is used to coherently sample the reinjected field. We demonstrate this approach using a terahertz frequency quantum cascade laser operating in both single- and multiple-longitudinal mode regimes, and are able to resolve spectral features not reliably resolved using traditional Fourier transform spectroscopy. We also investigate quantitatively the frequency perturbation of individual laser modes under OF, and find excellent agreement with predictions of the excess phase equation central to the theory of lasers under OF.

  1. EUROPEAN CULTURE: A REASSESSMENT OF THE IDENTITY

    Directory of Open Access Journals (Sweden)

    LAZĂR LUDMILA

    2017-12-01

    Full Text Available Massive migration to the EU, violent challenges in European capitals and internal conflicts raise not only political, but also cultural issues. The values of the European civilization are challenged by the new communication and informational technologies, at the EU level, as well as at the national and individual level. Europe is deeply marked by the globalization phenomenon and its consequences require to be addressed from a new perspective. West European vulnerabilities appear in the foreground and some people try to doubt the fundamental identity marks of the European society. In fact, as far back as the end of the last century, Edgar Morin proposed the dialogic principle to conceive Europe, merely because the dialogic ‘is at the heart of European identity, and not one or another of its elements or moments’. Under the current conditions, the European identity becomes fluid, ever-changing, whilst preserving the ‘hard core’ of values centred on the cultural dimension, characterized by diversity and openness for intercultural dialogue.

  2. Influência da energia de soldagem em uniões de lâminas finas através de laser pulsado de Nd:YAG Effect of the heat input on pulsed Nd:YAG laser welding of thin foil

    Directory of Open Access Journals (Sweden)

    Vicente A. Ventrella

    2010-12-01

    Full Text Available A soldagem laser vem sendo utilizada como um importante processo de manufatura. Ela pode ser utilizada tanto no modo contínuo quanto no modo pulsado. No processo onde se utiliza laser pulsado é possível realizar soldas de costura em lâminas finas, através da sobreposição dos pulsos. Nesse caso a velocidade de soldagem é definida pela taxa de sobreposição, taxa de repetição e diâmetro do pulso. A soldagem de sobreposição de lâminas finas apresenta problemas típicos como distorção excessiva da junta soldada, falta de contato entre as lâminas a serem soldadas (presença de um gap de ar, perfuração da junta e presença de altos níveis de tensões residuais. O processo de laser pulsado é preferido em relação ao processo por laser contínuo, pois ele possibilita um melhor controle da energia de soldagem. O presente trabalho estudou a influência da energia do pulso, no caso processo de soldagem laser Nd:YAG, na soldagem de lâminas finas ( 100µm de aço inoxidável austenítico AISI 316L, utilizado no revestimento de sensores (que trabalham em ambiente corrosivo da indústria sucroalcooleira. Utilizou-se energia de pulso de 1,0 a 2,25 Joules, com incremento de 0,25 Joules e largura temporal de 4 ms. As soldas foram realizadas com proteção gasosa de argônio. Foram realizadas análises macrográficas das juntas soldadas, através de secções transversais das mesmas e, ensaios de microdureza Vickers e ensaios de tração. Os resultados obtidos mostraram que o controle da energia do pulso, em processo de soldagem por laser de lâminas finas é de fundamental importância para a geração de juntas soldadas com boas propriedades mecânicas e livres de descontinuidades. O limite de resistência da junta soldada aumentou no início e depois sofreu um pequeno decréscimo em função do aumento da energia do pulso. O processo mostrou-se muito sensível à presença de gap entre as lâminas.Laser beam welding has been used widely

  3. The Development and Deployment of a Ground-Based, Laser-Induced Fluorescence Instrument for the In Situ Detection of Iodine Monoxide Radicals

    Science.gov (United States)

    Thurlow, M. E.; Co, D. T.; O'Brien, A. S.; Hannun, R. A.; Lapson, L. B.; Hanisco, T. F.; Anderson, J. G.

    2014-01-01

    High abundances of iodine monoxide (IO) are known to exist and to participate in local photochemistry of the marine boundary layer. Of particular interest are the roles IO plays in the formation of new particles in coastal marine environments and in depletion episodes of ozone and mercury in the Arctic polar spring. This paper describes a ground-based instrument that measures IO at mixing ratios less than one part in 1012. The IO radical is measured by detecting laser-induced fluorescence at wavelengths longer that 500 nm. Tunable visible light is used to pump the A23/2 (v = 2) ? X23/2 (v = 0) transition of IO near 445 nm. The laser light is produced by a solid-state, Nd:YAG-pumped Ti:Sapphire laser at 5 kHz repetition rate. The laser-induced fluorescence instrument performs reliably with very high signal-to-noise ratios (>10) achieved in short integration times (<1 min). The observations from a validation deployment to the Shoals Marine Lab on Appledore Island, ME are presented and are broadly consistent with in situ observations from European Coastal Sites. Mixing ratios ranged from the instrumental detection limit (<1 pptv) to 10 pptv. These data represent the first in situ point measurements of IO in North America.

  4. First steps towards a European atlas of natural radiation: status of the European indoor radon map

    International Nuclear Information System (INIS)

    Dubois, G.; Bossew, P.; Tollefsen, T.; De Cort, M.

    2010-01-01

    Within the context of its institutional scientific support to the European Commission, in 2005 the Radioactivity Environmental Monitoring (REM) group at the Joint Research Centre of the European Commission, started to explore the possibility of mapping indoor radon in European houses as a first step towards preparing a European Atlas of Natural Radiations. The main objective of such an atlas is to contribute to familiarizing the public with its naturally radioactive environment. The process of preparing the atlas should also provide the scientific community with a database of information that can be used for further studies and for highlighting regions with elevated levels of natural radiation. This document presents the status of the European indoor radon (Rn) map, first statistical results, and outlines of forthcoming challenges.

  5. How campaigns enhance European issues voting during European Parliament elections

    DEFF Research Database (Denmark)

    Beach, Derek; Møller Hansen, Kasper; Larsen, Martin Vinæs

    2017-01-01

    Based on findings from the literature on campaign effects on the one hand, and the literature on European Parliament elections on the other, we propose a model of European Parliamentary elections in which the campaign shift the calculus of electoral support, making differences in national political...... allegiances less important and attitudes about the European project more important by informing voters of and getting them interested in European politics. In effect, we argue that the political campaign leading up to the election makes European Parliament elections less second-order. While previous studies...... have demonstrated that EU attitudes can matter for voting behavior in European Parliament elections, existing research has drawn on post-election surveys that do not enable us to capture campaign effects. Our contribution is to assess the impact of a campaign by utilizing a rolling cross sectional...

  6. Laser-diode pumped Nd:YAG lasers; Laser diode reiki Nd:YAG lasear

    Energy Technology Data Exchange (ETDEWEB)

    Yuasa, H.; Akiyama, Y.; Nakayama, M. [Toshiba Corp., Tokyo (Japan)

    2000-04-01

    Laser-diode pumped Nd:YAG lasers are expected to be applied to laser processing fields such as welding, cutting, drilling, and marking due to their potential for high efficiency and compactness. We are designing and developing laser-diode pumped Nd:YAG lasers using numerical analysis simulation techniques such as ray tracing and thermal analysis. We have succeeded in achieving a laser power of more than 3 kW with 20% efficiency, which is the best ever obtained. In addition, we have developed a laser-diode pumped green laser by second harmonic generation, for precision machining on silicon wafers. (author)

  7. The development of laser fusion research

    Energy Technology Data Exchange (ETDEWEB)

    Mima, Kunioki [Osaka Univ., Suita (Japan). Inst. of Laser Engineering

    1998-11-01

    Laser fusion research started soon after the invention of laser. In 1972, the research was declassified and nuclear fusion by laser inplosion was proposed by J. Nuckolls. Since then, 26 years has passed and laser implosion experiments demonstrated 1000 times solid density compression. By the demonstration of 1000 times solid density, the mission of the laser fusion research shifted from `implosion physics` to `ignition and high gain`, namely demonstration of fusion output of 100 times input laser energy. By the recent developments of laser technology, ultra intense laser became available and opened up a new ignition scheme which is called `Fast Ignition`. The technology for the diode pumped solid state laser (DPSSL) is developed toward a laser driver for reactor. U.S. and France are constructing MJ lasers for demonstrating ignition and burn and Osaka University is investigating the fast ignition and the equivalent plasma of confinement (EPOC) toward high gain. (author)

  8. The development of laser fusion research

    International Nuclear Information System (INIS)

    Mima, Kunioki

    1998-01-01

    Laser fusion research started soon after the invention of laser. In 1972, the research was declassified and nuclear fusion by laser inplosion was proposed by J. Nuckolls. Since then, 26 years has passed and laser implosion experiments demonstrated 1000 times solid density compression. By the demonstration of 1000 times solid density, the mission of the laser fusion research shifted from 'implosion physics' to 'ignition and high gain', namely demonstration of fusion output of 100 times input laser energy. By the recent developments of laser technology, ultra intense laser became available and opened up a new ignition scheme which is called 'Fast Ignition'. The technology for the diode pumped solid state laser (DPSSL) is developed toward a laser driver for reactor. U.S. and France are constructing MJ lasers for demonstrating ignition and burn and Osaka University is investigating the fast ignition and the equivalent plasma of confinement (EPOC) toward high gain. (author)

  9. High power laser research and development at the Laboratory for Laser Energetics

    International Nuclear Information System (INIS)

    Soures, J.M.; McCrory, R.L.; Cerqua, K.A.

    1986-01-01

    As part of its research mission - to investigate the interaction of intense radiation with matter - the Laboratory for Laser Energetics (LLE) of the University of Rochester is developing a number of high-peak power and high-average-power laser systems. In this paper we highlight some of the LLE work on solid-state laser research, development and applications. Specifically, we discuss the performance and operating characteristics of Omega, a twenty-four beam, 4000 Joule, Nd:glass laser system which is frequently tripled using the polarization mismatch scheme. We also discuss progress in efforts to develop high-average-power solid-state laser systems with active-mirror and slab geometries and to implement liquid-crystal devices in high-power Nd:glass lasers. Finally we present results from a program to develop a compact, ultrahigh-peak-power solid-state laser using the concept of frequency chirped pulse amplification

  10. The theoretical arsenal of the European industrial integration

    Directory of Open Access Journals (Sweden)

    Yevhenii Machok

    2009-03-01

    Full Text Available In this article there was researched the key theories of the European industrial integration, made a comparative analysis. There has been done a detailed analysis of the main approaches to study and explanation of the industrial complexes integration of the European Union member states. There were described the key principles of the following concepts: functionalism, neofunctionalism, federalism, functional confederalism, theory federalism, of transactionalism, international regime, interdependency theory, agreement system, dynamism theory of the European industrial policy, intergovernmentalism, theory of multilevel management, theory of networks policy, government-centrism, neoinstitutionalism, comparativism and others. The obtained results can be used as a theoretical basis for the further study of the industrial policies among European Union member states; their approximation in the context of the formation of the common European economic complex and integration process of the member states.

  11. NATO Advanced Study Institute on Physical Processes in Laser-Materials Interaction, which was the 9th course of the Europhysics School of Quantum Electronics

    CERN Document Server

    1983-01-01

    It is a pleasure to write a few words as an introduction to the proceedings of the 1980 NATO ASI on "Physical Processes in Laser­ Naterial Interaction." This ASI is the ninth course of a series devoted to lasers and their applications, held under the responsibility of the Quantum Electronics Division of the European Physical Society, and for this reason known as the "Europhysics School of Quantum Electronics." Since 1971 the School has been operating with the joint direc­ tion of myself as representative of the academic research, and Dr. D. Roess (formerly with Siemens AEG, Munich, and now with Sick, Optik und Electronik, GmbH, Munich) for the industrial applications. Indeed the aim of the School is to alternate fundamental and applied frontier topics in the area of quantum electronics and modern optics, in order to introduce young research people from universities and industrial R&D laboratories to the new aspects of research opened by the laser.

  12. The politics of a European civil code

    NARCIS (Netherlands)

    Hesselink, M.W.

    2004-01-01

    Last year the European Commission published its Action Plan on European contract law. That plan forms an important step towards a European Civil Code. In its Plan, the Commission tries to depoliticise the codification process by asking a group of academic experts to prepare what it calls a 'common

  13. Revealing of hydrodynamic and electrostatic factors in the center-of-mass velocity of an expanding plasma generated by pulsed laser ablation

    Czech Academy of Sciences Publication Activity Database

    Krása, Josef; Lorusso, A.; Nassisi, V.; Velardi, L.; Velyhan, Andriy

    2011-01-01

    Roč. 29, č. 1 (2011), s. 113-119 ISSN 0263-0346 R&D Projects: GA MŠk(CZ) LC528 EU Projects: European Commission(XE) 228334 - LASERLAB-EUROPE Institutional research plan: CEZ:AV0Z10100523 Keywords : angular distribution of ions * Faraday cup signal function * partial ion currents Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.623, year: 2011

  14. EDITORIAL: Semiconductor lasers: the first fifty years Semiconductor lasers: the first fifty years

    Science.gov (United States)

    Calvez, S.; Adams, M. J.

    2012-09-01

    Anniversaries call for celebrations. Since it is now fifty years since the first semiconductor lasers were reported, it is highly appropriate to celebrate this anniversary with a Special Issue dedicated to the topic. The semiconductor laser now has a major effect on our daily lives since it has been a key enabler in the development of optical fibre communications (and hence the internet and e-mail), optical storage (CDs, DVDs, etc) and barcode scanners. In the early 1960s it was impossible for most people (with the exception of very few visionaries) to foresee any of these future developments, and the first applications identified were for military purposes (range-finders, target markers, etc). Of course, many of the subsequent laser applications were made possible by developments in semiconductor materials, in the associated growth and fabrication technology, and in the increased understanding of the underlying fundamental physics. These developments continue today, so that the subject of semiconductor lasers, although mature, is in good health and continues to grow. Hence, we can be confident that the pervasive influence of semiconductor lasers will continue to develop as optoelectronics technology makes further advances into other sectors such as healthcare, security and a whole host of applications based on the global imperatives to reduce energy consumption, minimise environmental impact and conserve resources. The papers in this Special Issue are intended to tell some of the story of the last fifty years of laser development as well as to provide evidence of the current state of semiconductor laser research. Hence, there are a number of papers where the early developments are recalled by authors who played prominent parts in the story, followed by a selection of papers from authors who are active in today's exciting research. The twenty-fifth anniversary of the semiconductor laser was celebrated by the publication of a number of papers dealing with the early

  15. The study of the European Union from outside: European integration studies in Norway and Iceland 1990-2010

    OpenAIRE

    Eliassen, Kjell; Marino, Marit Sjøvaag; Bergmann, Eirikur

    2012-01-01

    This is a working paper version of a paper written for SENT - The Network of European Studies. The aim of this chapter is to map the research on European integration carried out by Norwegian and Icelandic researchers and research institutions in the period 1990–2010. This study covers research of central aspects of the European Union itself: institutions, decision-making processes, policies, actors and the relationship to other countries, global and regional institutions and local and regiona...

  16. THE EMERGENCE OF THE EUROPEAN COUNTERFEIT MARKETS

    Directory of Open Access Journals (Sweden)

    Loredana Maftei

    2013-07-01

    Full Text Available The European market of counterfeit goods has become a subject of increasing concern for businesses, private firms and policymakers. With a growing demand in consumption for this kind of goods, each sector is damaged from the toy industries to the pharmaceuticals industry. This article is aimed to expose the dynamic of the European counterfeiting markets, to highlight the main factors of production, the main providers, the smuggling routes, the overall profit, the main counterfeit products and also to offer a general perspective on the affected European markets.

  17. Opting Out of the European Union

    DEFF Research Database (Denmark)

    Adler-Nissen, Rebecca

    controversial cases of differentiated integration: the British and Danish opt-outs from Economic and Monetary Union and European policies on borders, asylum, migration, internal security and justice. Drawing on over one hundred interviews with national representatives and EU officials, the author demonstrates......European integration continues to deepen despite major crises and attempts to take back sovereignty. A growing number of member states are reacting to a more constraining EU by negotiating opt-outs. This book provides the first in-depth account of how opt-outs work in practice. It examines the most...... how representatives manage the stigma of opting out, allowing them to influence even politically sensitive areas covered by their opt-outs. Developing a practice approach to European integration, the book shows how everyday negotiations transform national interests into European ideals. It is usually...

  18. THE COMPETITION POLICY IN THE EUROPEAN UNION

    Directory of Open Access Journals (Sweden)

    Dumitriţa Florea (Ionescu

    2012-09-01

    Full Text Available The idea of European unity dates back to antiquity, the time when the Roman Empire alsopursued such a goal. Attempts to unify European countries have appeared constantly in history, but theirsuccessful culmination crystallized only after the Second World War.Basically, the two wars have led to the downfall of Europe and the loss of its centenary political andmilitary position. The experience of these wars has led the states to initiate a defense mechanism of peace,security and international cooperation - resulted in creating an organization of universal jurisdiction -TheLeague of Nations. However, the successor of this organization, The United Nations - was one thatmanaged thorough its collective security system represented by the Security Council, to ensure andmaintain universal / global peace until now (Stelian Scăunaş, 2005.The creation of the European Union is based on four founding treaties: The Treaty establishingThe European Coal and Steel Community (ECSC - adopted in Paris on April 18, 1951, entered into forcein 1952 - treaty concluded for a period of 50 years and that has terminated in 2002, The Treatyestablishing the European Economic Community (EEC, The Treaty establishing the European AtomicEnergy Community (EAEC or EURATOM, both signed in Rome on March 25, 1947 and entered into forcein 1958 as the Treaties of Rome, and The Treaty on the European Union, which was adopted at Maastrichton 7th of February 1992 and entered into force in 1993. To these institution treaties we can add themodifying treaties of the founding treaties, including: The Merger Treaty - adopted in Brussels on 8 April1965, entered into force in 1967; The Single European Act - signed in Luxembourg and Hague in 1986,entered into force in 1987; The Amsterdam Treaty - signed on October 2, 1997, entered into force in 1999,The Treaty of Nice - signed on February 26, 2001, entered into force in 2003, The Lisbon Treaty signed in2007 and entered into force on December 1st

  19. Introducing the yellow laser

    Science.gov (United States)

    Lincoln, James

    2018-02-01

    The author has acquired a yellow laser with the specific wavelength of 589 nm. Because this is the first time such a laser has been discussed in this journal, I feel it is appropriate to provide a discussion of its function and capabilities. Normal laser safety should be employed, such as not pointing it into eyes or at people, and using eye protection for the young and inexperienced. It is important to note that 589 nm is the same wavelength as the Sodium-D line (doublet). This allows for the laser to serve as a replacement for sodium lamps, and, considering its rather high price, this added value should be balanced against its cost. What follows is a list of activities that showcase the yellow laser's unique promise as an engaging piece of technology that can be used in the teaching of physics.

  20. European Identity through Space Space Activities and Programmes as a Tool to Reinvigorate the European Identity

    CERN Document Server

    Baranes, Blandina

    2013-01-01

    Space activities are one particularly visible area, where Europe can shape its identity. This publication investigates the effect space activities have already had on building a European “spirit” (e.g. through European missions or European astronauts). It also looks into the effects that activities labelled “national” have on the emergence of a European identity. Based on this analysis, the book's intention is to identify creative ways and means for how to further use space for shaping the European identity. For this purpose the focus is not only on policy analysis but also on expertise from the fields of cultural science and the arts in order to tap their creative potential and also their theoretical approaches to the topic. Selecting this theme provides ESPI with another opportunity to develop its trans-disciplinary approach.

  1. Integrated Laser-Target Interaction Experiments on the RAL Petawatt Laser

    International Nuclear Information System (INIS)

    Patel, P. K.; Key, M. H.; Mackinnon, A. J.; Akli, K.; Berry, R.; Borghesi, M.; Brummit, P. A.; Chambers, D.; Clarke, R. J.; Damian, C.; Chen, H.; Eagleton, R.; Freeman, R.; Glenzer, S.; Gregori, G.; Heathcote, R.; Izumi, N.; Kar, S.; King, J. A.; Kock, J.; Kuba, J.; May, M.; Moon, S.; Neely, D.; Neville, D. R.; Nikroo, A.; Niles, A.; Pasley, J.; Patel, N.; Park, H. S.; Romagnani, L.; Shepherd, R.; Snavely, R. A.; Stephens, R.; Stoeckl, C.; Storm, M.; Theobald, W.; Van Maren, R.; Wilks, S. C.; Zhang, B.

    2005-01-01

    We report on two recent experimental campaigns performed on the new Petawatt laser at the Rutherford Appleton Laboratory in the UK.The laser has recently demonstrated performance characteristics of 400 J of laser energy being delivered on target in a sub 400 fs pulse, reaching a peak focal intensity on the order of 10''21 W/cm''2. The experiments covered multiplic areas of investigation including hot electron transport in planar foil and cone focus geometries, relativistic laser-solid interactions proton beam focusing and heating, and high energy K-alpha production and radiography. A somewhat novel approach was taken to the experiments in that all of the diagnostics required for the different areas of study were fielded simultaneously and operated on all shots. Thus, we were able to obtain extensive sets of measurements on a single-shot basis which provides significant benefit to our understanding of the laser-target interaction conditions and plasma properties. (Author)

  2. The Europeanization of the Romanian Society and the Tendential Modernity

    Directory of Open Access Journals (Sweden)

    Constantin Schifirneț

    2011-01-01

    Full Text Available The study examines the tendential modernity as an explanatory factor of the particularities of the Europeanization of the Romanian society. I start from the thesis that the evolution of the Europeanization process in Romania is closely associated with the process of accession to the European Union, finalized after the passing through a sinuous and difficult route. The analysis of the Europeanization of the Romanian society pursues the stages of its formation in the local context. Due to the fact thatRomaniawill still continue to be a society in transition, the most critical and relevant problem regards the dependency of the Romanian society on the strong societies inEurope. Under these circumstances, the question is, whetherRomaniawill represent a periphery ofEurope, or a national community with a European standard of development. Europeanization in its real sense does not mean “westernization”. Through the adherence to the European Union, Romanian society has the chance to put an end to the successive transitions known over its modern history, generators of tendential modernity. The Europeanization constitutes the fundamental purpose of the modernization processes of the Romanian society.

  3. How Is European Governance Configuring the EHEA?

    Science.gov (United States)

    Magalhães, António; Veiga, Amélia; Sousa, Sofia; Ribeiro, Filipa

    2012-01-01

    This article focuses on the interaction between the European dimension driven by the creation of the European Higher Education Area (EHEA) and the development of national reforms to fulfil that objective. On the basis of data gathered in eight countries involved in EuroHESC project TRUE (Transforming European Universities), the curricular and the…

  4. EUROPEAN UNION AND THE PROCESS OF GLOBALIZATION

    Directory of Open Access Journals (Sweden)

    Mihail CARADAICĂ

    2014-05-01

    Full Text Available What is the relation between globalization and the process of European integration? Does the European integration have its own way, or is it deeply dependent on globalization? Those are the main questions I will try to answer in this paper by using an alternative critical approach: neo-gramscianism. Neo-gramscianism is a historical materialist view on the European integration process and international political economy which offers a better understanding of the social changes in terms of social forces agency and super structural influence (the neoliberal ideology of globalization and European integration. My aim is to analyze the globalization process through a neo-gramscian theoretical framework and to observe how its main components affect European Integration. I will do this by assuming the definition of globalization provided by Andreas Bieler, who understands this process through three main pillars: transnationalization of finance, transnationalization of production and ideological shift from Keynesianism to neoliberalism. Finally I will try to formulate some conclusions regarding the emergence of European Round Table of Industrialists – the first lobby group of big capital at the European Union level – and Economic and Monetary Union – the internal market program that symbolizes the shift to neo-liberalism.

  5. Laser safety at high profile laser facilities

    International Nuclear Information System (INIS)

    Barat, K.

    2010-01-01

    Complete text of publication follows. Laser safety has been an active concern of laser users since the invention of the laser. Formal standards were developed in the early 1970's and still continue to be developed and refined. The goal of these standards is to give users guidance on the use of laser and consistent safety guidance and requirements for laser manufacturers. Laser safety in the typical research setting (government laboratory or university) is the greatest challenge to the laser user and laser safety officer. This is due to two factors. First, the very nature of research can put the user at risk; consider active manipulation of laser optics and beam paths, and user work with energized systems. Second, a laser safety culture that seems to accept laser injuries as part of the graduate student educational process. The fact is, laser safety at research settings, laboratories and universities still has long way to go. Major laser facilities have taken a more rigid and serious view of laser safety, its controls and procedures. Part of the rationale for this is that these facilities draw users from all around the world presenting the facility with a work force of users coming from a wide mix of laser safety cultures. Another factor is funding sources do not like bad publicity which can come from laser accidents and a poor safety record. The fact is that injuries, equipment damage and lost staff time slow down progress. Hence high profile/large laser projects need to adapt a higher safety regimen both from an engineering and administrative point of view. This presentation will discuss all these points and present examples. Acknowledgement. This work has been supported by the University of California, Director, Office of Science.

  6. Corrugated structure insertion for extending the SASE bandwidth up to 3% at the European XFEL

    International Nuclear Information System (INIS)

    Zagorodnov, I.; Feng, G.; Limberg, T.

    2016-07-01

    The usage of X-ray free electron laser (XFEL) in femtosecond nanocrystallography involves sequential illumination of many small crystals of arbitrary orientation. Hence a wide radiation bandwidth will be useful in order to obtain and to index a larger number of Bragg peaks used for determination of the crystal orientation. Considering the baseline configuration of the European XFEL in Hamburg, and based on beam dynamics simulations, we demonstrate here that the usage of corrugated structures allows for a considerable increase in radiation bandwidth. Data collection with a 3% bandwidth, a few microjoule radiation pulse energy, a few femtosecond pulse duration, and a photon energy of 5.4 keV is possible. For this study we have developed an analytical modal representation of the short-range wake function of the flat corrugated structures for arbitrary offsets of the source and the witness particles.

  7. Corrugated structure insertion for extending the SASE bandwidth up to 3% at the European XFEL

    Energy Technology Data Exchange (ETDEWEB)

    Zagorodnov, I.; Feng, G.; Limberg, T.

    2016-07-15

    The usage of X-ray free electron laser (XFEL) in femtosecond nanocrystallography involves sequential illumination of many small crystals of arbitrary orientation. Hence a wide radiation bandwidth will be useful in order to obtain and to index a larger number of Bragg peaks used for determination of the crystal orientation. Considering the baseline configuration of the European XFEL in Hamburg, and based on beam dynamics simulations, we demonstrate here that the usage of corrugated structures allows for a considerable increase in radiation bandwidth. Data collection with a 3% bandwidth, a few microjoule radiation pulse energy, a few femtosecond pulse duration, and a photon energy of 5.4 keV is possible. For this study we have developed an analytical modal representation of the short-range wake function of the flat corrugated structures for arbitrary offsets of the source and the witness particles.

  8. The use of lasers in manufacturing

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    This book contains the proceedings of a conference on the use of lasers in manufacturing, topics covered include: An introduction to industrial lasers; Production laser hardening for aerospace; The role of fiber optics in laser material processing; and Light-material interactions in laser material processing

  9. Lasers '89

    International Nuclear Information System (INIS)

    Harris, D.G.; Shay, T.M.

    1990-01-01

    This book covers the following topics: XUV, X-Ray and Gamma-Ray Lasers, excimer lasers, chemical lasers, nuclear pumped lasers, high power gas lasers, solid state lasers, laser spectroscopy. The paper presented include: Development of KrF lasers for fusion and Nuclear driven solid-state lasers

  10. Collective legal protection: The European approach

    Directory of Open Access Journals (Sweden)

    Petrušić Nevena

    2014-01-01

    Full Text Available One of the basic goals of the EU justice policy is to ensure an efficient and effective legal protection, particularly in cross-border disputes and cases concerning the violation of rights guaranteed under the EU legislation. In order to accomplish this goal, the EU embarked on a horizontal harmonization of civil procedure in some sectors and reinforced the institutional cooperation of Member States in the field of civil justice. Concurrently, there were some legal interventions in the field of civil procedure, which contributed to establishing a number of European procedural mechanisms, such as: the European Small Claims Procedure (2007, the European Payment Order Procedure (2006, etc. Many studies and analyses show that procedural mechanisms of collective legal protection are essential for ensuring an efficient and effective legal protection of rights guaranteed by the EU law. The idea of introducing the collective legal protection instruments into the EU law has been present for more than two decades. It has been endorsed by the European Economic and Social Committee, which has played the key role in its promotion. In June 2013, after extensive consultations, the European Commission adopted the Recommendation on common principles for injunctive and compensatory collective redress mechanisms in the Members States concerning violations of rights guaranteed under the EU law. This document has provided a coherent horizontal framework for the collective legal protection at the EU level by establishing the common European principles for collective redress mechanisms which the Member States should incorporate into their national systems. Analysis of the common principles governing the collective legal protection shows that the European approach to shaping the collective redress claims is significantly different from the American class action model, which is considered to be incompatible with the European legal tradition and deemed to provide a wide

  11. Introducing the Yellow Laser

    Science.gov (United States)

    Lincoln, James

    2018-01-01

    The author has acquired a yellow laser with the specific wavelength of 589 nm. Because this is the first time such a laser has been discussed in this journal, I feel it is appropriate to provide a discussion of its function and capabilities. Normal laser safety should be employed, such as not pointing it into eyes or at people, and using eye…

  12. Lasers in the automobile industry

    Science.gov (United States)

    Roessler, David M.; Uddin, Nasin

    1996-04-01

    The use of lasers for automotive materials processing is reviewed both from an historical perspective and in terms of current trends. The initial lead gained in North America has subsequently given way to the remarkable growth in the use of lasers in the Japanese automotive industry. The latter's dominance has resulted in cutting being the most common laser machining application on a global basis, even though welding predominates in the US. About 98% of all automotive laser materials processing employs either CO2 or Nd:YAG lasers, although there are special applications where the excimer or other lasers can be found. This paper discusses two of the processes currently receiving most attention. Laser technology is not stagnant and the automotive industry continues to benefit from the continuing developments. However, even more striking growth can be expected as the whole process of automotive manufacture is being re-examined in response to the demands for more fuel- efficient and environmentally friendly, but still affordable and satisfying, vehicles.

  13. Agenda Responsiveness in the European Council

    DEFF Research Database (Denmark)

    Alexandrova, Petya; Rasmussen, Anne; Toshkov, Dimiter

    2016-01-01

    The existence of political responsiveness in multi-level systems like the EU remains an open question despite significant recent research on the topic. This article studies whether the European Council responds to the shifting policy priorities of European citizens. More specifically, it explores......, a detailed examination of the shifts in prioritisation of single issues over time reveals little evidence for dynamic issue responsiveness. Recently the European Council has paid more attention to the issues that the public considered the most pressing problems but the convergence could possibly be driven...

  14. Sinus tarsi approach (STA) versus extensile lateral approach (ELA) for treatment of closed displaced intra-articular calcaneal fractures (DIACF): A meta-analysis.

    Science.gov (United States)

    Bai, L; Hou, Y-L; Lin, G-H; Zhang, X; Liu, G-Q; Yu, B

    2018-04-01

    Our aim was to compare the effect of sinus tarsi approach (STA) vs extensile lateral approach (ELA) for treatment of closed displaced intra-articular calcaneal fractures (DIACF) is still being debated. A thorough research was carried out in the MEDLINE, EMBASE and Cochrane library databases from inception to December 2016. Only prospective or retrospective comparative studies were selected in this meta-analysis. Two independent reviewers conducted literature search, data extraction and quality assessment. The primary outcomes were anatomical restoration and prevalence of complications. Secondary outcomes included operation time and functional recovery. Four randomized controlled trials involving 326 patients and three cohort studies involving 206 patients were included. STA technique for DIACFs led to a decline in both operation time and incidence of complications. There were no significant differences between the groups in American Orthopedic Foot and Ankle Society scores, nor changes in Böhler angle. This meta-analysis suggests that STA technique may reduce the operation time and incidence of complications. In conclusion, STA technique is reasonably an optimal choice for DIACF. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  15. Integrated laser-target interaction experiments on the RAL petawatt laser

    International Nuclear Information System (INIS)

    Patel, P K; Key, M H; Mackinnon, A J

    2005-01-01

    We review a recent experimental campaign to study the interaction physics of petawatt laser pulses incident at relativistic intensities on solid targets. The campaign was performed on the 500 J sub-picosecond petawatt laser at the Rutherford Appleton Laboratory. An extensive suite of optical, x-ray, and particle diagnostics was employed to characterise the processes of laser absorption, electron generation and transport, thermal and K-alpha x-ray generation, and proton acceleration

  16. European Community.

    Science.gov (United States)

    1987-05-01

    The European Community was established in 1951 to reconcile France and Germany after World War II and to make possible the eventual federation of Europe. By 1986, there were 12 member countries: France, Italy, Belgium, the Federal Republic of Germany, Luxembourg, the Netherlands, Denmark, Ireland, the United Kingdom, Greece, Spain, and Portugal. Principal areas of concern are internal and external trade, agriculture, monetary coordination, fisheries, common industrial and commercial policies, assistance, science and research, and common social and regional policies. The European Community has a budget of US$34.035 billion/year, funded by customs duties and 1.4% of each member's value-added tax. The treaties establishing the European Community call for members to form a common market, a common customs tariff, and common agricultural, transport, economic, and nuclear policies. Major European Community institutions include the Commission, Council of Ministers, European Parliament, Court of Justice, and Economic and Social Committee. The Community is the world's largest trading unit, accounting for 15% of world trade. The 2 main goals of the Community's industrial policy are to create an open internal market and to promote technological innovation in order to improve international competitiveness. The European Community aims to contribute to the economic and social development of Third World countries as well.

  17. Realizing the European Higher Education Area: Berlin Conference of European Higher Education Ministers

    Science.gov (United States)

    European Education, 2004

    2004-01-01

    The Bologna Declaration of June 1999 has put in motion a series of reforms needed to make European higher education more compatible and comparable, more competitive and attractive for European citizens and for citizens and scholars from other continents. In Prague, in May 2001, the ministers took note of the progress so far and added three new…

  18. Raising European Citizens: Constructing European Identities in French and English Textbooks

    Directory of Open Access Journals (Sweden)

    Inari Sakki

    2016-06-01

    Full Text Available Schools play a pivotal role in the formation of identities and in the political socialization of youth. This study explores the social representations of European integration in French and English school textbooks and shows how the social representations are discursively used to construct national and European identities. By analysing the history and civics textbooks of major educational publishers, this study aims to demonstrate how European integration is understood, made familiar and concretized in the school textbooks of the two influential but different European countries. The findings suggest some shared and some diverse patterns in the way the two European countries portray and construct the political project of European integration. These representations, constructed around French Europe in French textbooks and ambivalent Europe in English textbooks, share the images of a strong European economy and a French-led political Europe. However, they position themselves differently with respect to the United States, motivation for the European unification process and the significance of common values and heritage. In both countries textbooks draw upon memories that are important for group identity. While the French textbooks make European integration meaningful in reference to a shared post-war collective memory and to a cultural memory based on a more ancient idea of Europe, shared values and heritage, the English textbooks anchor it more strongly to domestic policy.

  19. Verification of a characterization method of the laser-induced selective activation based on industrial lasers

    DEFF Research Database (Denmark)

    Zhang, Yang; Hansen, Hans Nørgaard; Tang, Peter T.

    2013-01-01

    In this article, laser-induced selective activation (LISA) for subsequent autocatalytic copper plating is performed by several types of industrial scale lasers, including a Nd:YAG laser, a UV laser, a fiber laser, a green laser, and a short pulsed laser. Based on analysis of all the laser......-machined surfaces, normalized bearing area curves and parameters are used to characterize the surface quantitatively. The range of normalized bearing area curve parameters for plate-able surface is suggested. PBT/PET with 40 % glass fiber was used as the substrate material. For all of the studied lasers......, the parameters were varied in a relatively large range, and matrixes of the laser-machined surface were obtained. The topography of those laser-machined surfaces was examined by scanning electronic microscope (SEM). For each sample examined by SEM, there was an identical workpiece plated by for 90 min...

  20. How to study the history of European law?

    DEFF Research Database (Denmark)

    Rasmussen, Morten

    This paper has a double purpose. On the one hand, it offers a new history, based on recently discovered primary sources, of the driving forces behind the so-called ‘constitutionalisation’ of European law taking place in 1963-64. On the other hand, it uses the lessons of this new history to reflect...... on how a general history of European law should be written and in particular how to avoid the pitfalls that characterises mainstream research on European law. In the first part it is argued that the ‘constitutionalisation’ of European law was promoted by a broad coalition beyond the Court of Justice...... the ‘constitutionalisation’ of European law in the 1960s. This is in particular the case with the ‘integration-through-law’ paradigm that permeates most of the writing on European law even today. Concluding, it is argued that a general history of European law should avoid the adoption of mainstream conceptualisations...

  1. The European Fusion Programme

    International Nuclear Information System (INIS)

    Palumbo, D.

    1983-01-01

    The European Fusion Programme is coordinated by Euratom and represents a long term cooperative project of Member States of the European Communities in the field of fusion, designed to lead to the joint construction of prototypes. The main lines of the programme proposed for 1982 to 1986 are: (1) the continuation of a strong effort on tokamaks with emphasis on JET construction, operation and upgrading, (2) conceptual design of NET and development of the related technology, and (3) further work on two alternative magnetic confinement systems. The current status and future plans for this programme are discussed in the paper. (author)

  2. Clinical evaluation of dentin hypersensitivity treatment with the low intensity Gallium-Aluminum-Arsenide laser - AsGaAl Avaliação clínica do tratamento da hiperestesia dentinária com laser de baixa potência de Arseniato de Gálio-Alumínio - AsGaAl

    Directory of Open Access Journals (Sweden)

    Luciana Chucre Gentile

    2004-12-01

    Full Text Available The dentin hypersensitivity is a painful condition rather prevalent in the general population. There are several ways of treatment for such condition, including the low intensity lasers. The proposal of this study was to verify the effectiveness of the Gallium-Aluminum-Arsenide diode laser in the treatment of this painful condition, using a placebo as control. MATERIALS AND METHODS: Thirty-two patients were selected, 22 females and 10 males, with ages ranging from 20 to 52 years old. The 32 patients were randomly distributed into two groups, treated and control; the sample consisted of 68 teeth, 35 in the treated group and 33 in the control group. The treated group was exposed to six laser applications with intervals from 48 to 72 hours, and the control group received, as placebo, applications of a curing light. RESULTS: A significant reduction was observed in the pain condition between the initial phase and after six laser applications; however, such reduction could also be observed for the control group exposed to the placebo. CONCLUSION: Therapy with the low intensity Gallium-Aluminum-Arsenide laser - AsGaAl induces a statistically significant reduction in the painful condition after each application and between the beginning and end of treatment, although there was no statistically significant difference between the treated group (laser and the control group (placebo at the end of treatment and after the mediate evaluation results (after 6 weeks, this way impairing the real measurement of laser effectiveness and placebo effect.A hiperestesia dentinária trata-se de uma condição dolorosa bastante prevalente nas populações mundiais. Várias são as modalidades de tratamento para tal condição, entre elas, os lasers de baixa potência. A proposta deste estudo foi a de verificar a efetividade do laser de diodo de Arseniato de Gálio-Alumínio no tratamento desta condição dolorosa, utilizando-se um placebo como controle. MATERIAIS E M

  3. The European Court of Justice and the European Court of Human Rights determining the State responsible for examining an Asylum Application

    NARCIS (Netherlands)

    Versteegh, L.

    2015-01-01

    Article 6 of the Treaty of the European Union (TEU) as part of the 2009 Treaty of Lisbon states that the European Union recognizes the rights, freedoms and principles set out in the EU Charter of Fundamental Rights. It also states fundamental rights, as guaranteed by the European Convention on Human

  4. Globalization and Europeanization. A Projection on a European Model of Public Administration

    Directory of Open Access Journals (Sweden)

    Ani Matei

    2008-04-01

    Full Text Available The specialized studies and literature present moreover and insistently the connection between globalization and Europeanization, more precisely between globalization and a European model of integration, whose features aim to set up a global-type European society. The development of the European model of integration starts with economic elements, it reveals nowadays the Economic and Monetary Union and in perspective it will be structured within a sui generis system of transnational governance. The values of the European model of integration become fundamental values of a social process, with powerful economic and political determinations, aiming the multi-causal interference between individual, community and European construction. This process, remarked increasingly in the specialized literature, being assigned with the name of Europeanization, has got original, functional features in the spectrum of significations of the globalization paradigm. As essential global-type formula, within Europeanization, we shall find models with economic, political or social finality, integrating also a model of administration among the latter ones. When we say administration, we refer to its up dated and adequate contents to the new European developments. This assertion derives from a less economic modality to conceptualize the relationship between globalization and Europeanization, presenting Europeanization more as a political adaptation to globalization and even a political expression of globalization. In this context, the development of a system for European governance on several levels (local, regional, national, intergovernmental and supranational suggests its evolution towards globalization. In fact, the literature specific for Europeanization asserts the fact that the European model has also features with integrative nature related to the supranational and trans-governmental dimensions, as well as features with normative nature in view of harmonization

  5. European Economic Community/the European energy conference

    Energy Technology Data Exchange (ETDEWEB)

    1979-03-30

    European Economic Community/the European energy conference (a meeting of the energy ministers of the nine member countries), held at Brussels on 3/27/79, was a continuation of the EEC Council meeting held at Paris on 3/12-13/79. Proposals for measures to be taken by the member countries included support for exploration, especially geophysical prospecting for oil off the east coast of Greenland, at a cost of 3.5 million units of account (UC); modification of the regulations for crude oil distribution among the EEC member countries in case of a supply crisis; a second series of 36 energy-conservation demonstration projects, to cost 15,626,320 UC and be undertaken in 1979-83; and the UK proposal to call for bids on the first series of 17 projects, costing 5,779,000 UC and adopted in Dec. 1978, before discussing the second series. Six of the 36 projects are French; they involve heat pumps and hybrid nuclear-electric vehicles and space-heating systems. A report on the current status of coal projects was given, and problems with fast-breeder reactors were discussed.

  6. Free-electron laser driven by the LBNL laser-plasma accelerator

    International Nuclear Information System (INIS)

    Schroeder, C.B.; Fawley, W.M.; Gruner, F.; Bakeman, M.; Nakamura, K.; Robinson, K.E.; Toth, Cs.; Esarey, E.; Leemans, W.P.

    2008-01-01

    A design of a compact free-electron laser (FEL), generating ultra-fast, high-peak flux, XUV pulses is presented. The FEL is driven by ahigh-current, 0.5 GeV electron beam from the Lawrence Berkeley National Laboratory (LBNL) laser-plasma accelerator, whose active acceleration length is only a few centimeters. The proposed ultra-fast source (∼10 fs) would be intrinsically temporally synchronized to the drive laser pulse, enabling pump-probe studies in ultra-fast science. Owing to the high current (>10 kA) of the laser-plasma-accelerated electron beams, saturated output fluxes are potentially greater than 10 13 photons/pulse. Devices based both on self-amplified spontaneous emission and high-harmonic generated input seeds, to reduce undulator length and fluctuations, are considered.

  7. Laser in urology. Laser i urologien

    Energy Technology Data Exchange (ETDEWEB)

    Breisland, H.O. (Aker Sykehus, Oslo (Norway))

    1991-09-01

    The neodymium YAG laser is particularly suited for endoscopic urologic surgery because the YAG laser light can be conducted in flexible fibers. Superficial bladder tumours can be treated under local anaesthesia in the outpatient department. The frequency of local recurrences is low, significantly lower than after electrosection or electrocoagulation. Selected cases of T2-muscle invasive bladder tumours can be cured with laser coagulation applied subsequently to transurethral resection. Combined treatment with electrosection and laser coagulation of localized prostatic cancer is a promising method which compares favourably with results obtained by other treatment modalities. Tumours in the upper urinary tract can be laser-treated through ureteroscopes or nephroscopes, but the treatment should be limited to low stage, low grade tumours. Laser is the treatment of choice for intraurethral condylomatas. Laser treatment of penil carcinoma gives excellent cosmetic and functional results and few local recurrences. Laser lithotripsy is a new technique for treatment of ureteric stones and photodynamic laser therapy is a promising tecnique for treatment of carcinoma in situ in the bladder empithelium. However, neither of these techniques are available for clinical use in Norway as yet. 17 refs., 3 figs., 1 tabs.

  8. The laser revolution. A brilliant discovery. The multipurpose laser. Towards a bright future

    International Nuclear Information System (INIS)

    Mueller, Xavier; Bourdet, Julien; Feve, Sylvain; Julien, Lucile; Delaporte, Philippe; Aspect, Alain; Belliard, Laurent; Decremps, Frederic; Espinasse, Loic; Exertier, Pierre; Godin Beekmann, Sophie; Lenne, Pierre-Francois; Salamero, Jean; Amiranoff, Francois; Colombelli, Raffaele; Picque, Nathalie; Couderc, Vincent; Ducloy, Martial; Lozes, Francoise; Mora, Patrick

    2010-01-01

    In May 1960, American physicist Theodore Maiman described the first ruby laser in a scientific journal. Fifty years later, the laser has conquered the planet... and the world is now paying tribute to this champion of modern technology. The laser has undoubtedly become indispensable in everyday life, in the industrial and medical sectors and, last but not least, in the research field. Yet this fabulous success story is still in its infancy, as research laboratories across the world continue to improve laser technology, giving rise to often unexpected applications. Our feature explores an invention that is just as revolutionary today as it was 50 years ago

  9. Convergence of the National Public Administration Systems within the European Union in the Context of the European Model Emergence

    Directory of Open Access Journals (Sweden)

    Cezar Corneliu MANDA

    2015-09-01

    Full Text Available The long running history for over half a century of the European Union was marked initially by the need to approach the member states’ administrations, with a view to getting them more compatible, as a prerequisite of the EU’s functioning, at the foreseen political-legal and economic parameters, and then the respective tendency started to intensify progressively relative to the more and more ambitious goals and objectives of the European Union establishment. Today we witness an increased dynamics of such a process which seems to integrate even the specificities derived from the sovereignty elements, considered not long ago as sacred, at the states level, a processuality whose finality consists in the continuous consolidation of the European administrative area, as an essential corollary to the effective inter-community mechanisms development, equally as an effect of the states’ integration but also a condition for the European project success. In such a context, the present approach proposes to analyse and identify the degree of cohesion and of similarity between the EU states administrations, which revolve around the emergence of the common characteristics, considered as authentic values of the administrative area, susceptible to be accepted altogether as bases for the European administration model, whose outline tends to become more visible.

  10. Relações e conflitos entre crianças na Educação Infantil: o que elas pensam e falam sobre isso The relations and conflicts between children in the Kindergarten: their thinks and speechs about this

    Directory of Open Access Journals (Sweden)

    Bianca Rodriguez Corsi

    2011-12-01

    Full Text Available Atualmente corrobora-se a ideia da importância da infância e de dar voz às crianças, uma vez que estas são compreendidas enquanto sujeitos capazes de construir, transformar, produzir e reproduzir cultura. A partir deste novo paradigma e de uma problemática real da dinâmica de crianças da Educação Infantil, os conflitos interpessoais ocorridos entre elas, filmou-se e apresentou-se para as crianças, de 5 a 6 anos, cenas de suas rotinas objetivando que elas deem suas opiniões, hipóteses e sugestões acerca do que são conflitos e como se resolvem. Ouvir o que as crianças têm a dizer acerca dos conflitos que vivenciam valida a ideia da criança enquanto produtora de cultura e de conhecimento e, ainda, expande as possibilidades de pesquisa tendo como sustentação teórica e metodológica a Sociologia da Infância.Currently supports up with the idea of the importance of childhood and give voice to children, as these are understood as subjects able to build, transform, produce and reproduce culture. From this new paradigm and a real problem of the dynamics of children in Kindergarten, the interpersonal conflicts occurred between them, it is filmed and presented to the children, 5-6 years, scenes of their routines that they give their opinions, suggestions and hypotheses about what are and how conflicts are resolved. Listen to what children have to say about the conflicts they have lived validates the idea of the child as a producer of culture and knowledge, and also expands the possibilities of research having as theoretical and methodological Sociology of Childhood.

  11. European Summit on the Prevention and Self-Management of Chronic Respiratory Diseases: report of the European Union Parliament Summit (29 March 2017).

    Science.gov (United States)

    Hellings, Peter W; Borrelli, David; Pietikainen, Sirpa; Agache, Ioana; Akdis, Cezmi; Bachert, Claus; Bewick, Michael; Botjes, Erna; Constantinidis, Jannis; Fokkens, Wytske; Haahtela, Tari; Hopkins, Claire; Illario, Maddalena; Joos, Guy; Lund, Valerie; Muraro, Antonella; Pugin, Benoit; Seys, Sven; Somekh, David; Stjärne, Pär; Valiulis, Arunas; Valovirta, Erkka; Bousquet, Jean

    2017-01-01

    On March 29, 2017, a European Summit on the Prevention and Self-Management of Chronic Respiratory Diseases (CRD) was organized by the European Forum for Research and Education in Allergy and Airway Diseases. The event took place in the European Parliament of Brussels and was hosted by MEP David Borrelli and MEP Sirpa Pietikainen. The aim of the Summit was to correspond to the needs of the European Commission and of patients suffering from CRD to join forces in Europe for the prevention and self-management. Delegates of the European Rhinologic Society, European Respiratory Society, European Academy of Allergy and Clinical Immunology, European Academy of Paediatrics, and European Patients Organization EFA all lectured on their vision and action plan to join forces in achieving adequate prevention and self-management of CRD in the context of Precision Medicine. Recent data highlight the preventive capacity of education on optimal care pathways for CRD. Self-management and patient empowerment can be achieved by novel educational on-line materials and by novel mobile health tools enabling patients and doctors to monitor and optimally treat CRDs based on the level of control. This report summarizes the contributions of the representatives of different European academic stakeholders in the field of CRD.

  12. The European fusion technology programme

    International Nuclear Information System (INIS)

    Goedkoop, J.A.

    1984-01-01

    With the 1982-86 pluriannual programme, reactor technology became a separate chapter in the fusion research programme of the European Commission. It comprises work on materials, the breeder blanket, tritium management, magnet coils, maintenance and the safety and environmental aspects. After an overview of the programme each of these areas is discussed briefly and some remarks are made on the role played by the European fission energy and magnet laboratories. (author)

  13. European visit

    CERN Multimedia

    2006-01-01

    The European Commissioner for Science and Research, Janez Potočnik, (on the right) visited the CMS assembly hall accompanied by Jim Virdee, Deputy Spokesman of CMS (on the left), and Robert Aymar, Director-General of CERN. The European Commissioner for Science and Research, Janez Potočnik, visited CERN on Tuesday 31 January. He was welcomed by the Director-General, Robert Aymar, who described the missions and current activities of CERN to him, in particular the realisation of the LHC with its three components: accelerator, detectors, storage and processing of data. The European Commissioner then visited the CMS assembly hall, then the hall for testing the LHC magnets and the ATLAS cavern. During this first visit since his appointment at the end of 2004, Janez Potočnik appeared very interested by the operation of CERN, an example of successful scientific co-operation on a European scale. The many projects (30 on average) that CERN and the European Commission carry out jointly for the benefit of res...

  14. European Union

    International Nuclear Information System (INIS)

    Schaller, K.

    1995-01-01

    Different instruments used by European Commission of the European Union for financial support radioactive waste management activities in the Russian Federation are outlined. Three particular programmes in the area are described

  15. European Union response to Fukushima. European stress tests and peer review

    Energy Technology Data Exchange (ETDEWEB)

    Jamet, Philippe [Autorite de Surete Nucleaire (ASN), Paris (France)

    2012-07-01

    Following the severe accidents which started in the Fukushima Dai-ichi NPP on 11 March 2011, the European Council requested that a comprehensive safety and risk assessment, in light of preliminary lessons learned, be performed on all EU nuclear plants. Therefore, stress tests and peer review assessing natural initiating events, the loss of safety systems and severe accident management have been performed in the 15 European Union countries with nuclear power plants as well as Switzerland and Ukraine. The final peer review report of the European Nuclear Safety Regulators Group (ENSREG) highlights four main areas for improvement to be explored across Europe: 1. Development by the Western European Nuclear Regulators' Association (WENRA), with the contribution of the best available EU expertise, of a European guidance on assessment of natural hazards and margins; 2. Importance of Periodic Safety Review to be underlined by ENSREG; 3. Expeditious implementation of the recognised measures to protect containment integrity; 4. Prevention of accidents resulting from natural hazards and limitation of their consequences. The peer review of the European stress tests was completed in April 2012. In their conclusive statement issued 26 April 2012, the national European regulators and the European Commission as European Nuclear Safety Regulators Group (ENSREG) required that follow-up would occur by way of an ENSREG action plan. Country specific action plans will be developed and peer review workshop will be organised to share lessons learned on the implementation of post-Fukushima safety improvements.

  16. European Union response to Fukushima. European stress tests and peer review

    International Nuclear Information System (INIS)

    Jamet, Philippe

    2012-01-01

    Following the severe accidents which started in the Fukushima Dai-ichi NPP on 11 March 2011, the European Council requested that a comprehensive safety and risk assessment, in light of preliminary lessons learned, be performed on all EU nuclear plants. Therefore, stress tests and peer review assessing natural initiating events, the loss of safety systems and severe accident management have been performed in the 15 European Union countries with nuclear power plants as well as Switzerland and Ukraine. The final peer review report of the European Nuclear Safety Regulators Group (ENSREG) highlights four main areas for improvement to be explored across Europe: 1. Development by the Western European Nuclear Regulators' Association (WENRA), with the contribution of the best available EU expertise, of a European guidance on assessment of natural hazards and margins; 2. Importance of Periodic Safety Review to be underlined by ENSREG; 3. Expeditious implementation of the recognised measures to protect containment integrity; 4. Prevention of accidents resulting from natural hazards and limitation of their consequences. The peer review of the European stress tests was completed in April 2012. In their conclusive statement issued 26 April 2012, the national European regulators and the European Commission as European Nuclear Safety Regulators Group (ENSREG) required that follow-up would occur by way of an ENSREG action plan. Country specific action plans will be developed and peer review workshop will be organised to share lessons learned on the implementation of post-Fukushima safety improvements.

  17. Laser ablation of hard tissue: correlation between the laser beam parameters and the post-ablative tissue characteristics

    Science.gov (United States)

    Serafetinides, Alexandros A.; Makropoulou, Mersini I.; Khabbaz, Maruan

    2003-11-01

    Hard dental tissue laser applications, such as preventive treatment, laser diagnosis of caries, laser etching of enamel, laser decay removal and cavity preparation, and more recently use of the laser light to enlarge the root canal during the endodontic therapy, have been investigated for in vitro and in vivo applications. Post-ablative surface characteristics, e.g. degree of charring, cracks and other surface deformation, can be evaluated using scanning electron microscopy. The experimental data are discussed in relevance with the laser beam characteristics, e.g. pulse duration, beam profile, and the beam delivery systems employed. Techniques based on the laser illumination of the dental tissues and the subsequent evaluation of the scattered fluorescent light will be a valuable tool in early diagnosis of tooth diseases, as carious dentin or enamel. The laser induced autofluorescence signal of healthy dentin is much stronger than that of the carious dentin. However, a better understanding of the transmission patterns of laser light in teeth, for both diagnosis and therapy is needed, before the laser procedures can be used in a clinical environment.

  18. Lasers in tattoo and pigmentation control: role of the PicoSure(®) laser system.

    Science.gov (United States)

    Torbeck, Richard; Bankowski, Richard; Henize, Sarah; Saedi, Nazanin

    2016-01-01

    The use of picosecond lasers to remove tattoos has greatly improved due to the long-standing outcomes of nanosecond lasers, both clinically and histologically. The first aesthetic picosecond laser available for this use was the PicoSure(®) laser system (755/532 nm). Now that a vast amount of research on its use has been conducted, we performed a comprehensive review of the literature to validate the continued application of the PicoSure(®) laser system for tattoo removal. A PubMed search was conducted using the term "picosecond" combined with "laser", "dermatology", and "laser tattoo removal". A total of 13 articles were identified, and ten of these met the inclusion criteria for this review. The majority of studies showed that picosecond lasers are an effective and safe treatment mode for the removal of tattoo pigments. Several studies also indicated potential novel applications of picosecond lasers in the removal of various tattoo pigments (eg, black, red, and yellow). Adverse effects were generally mild, such as transient hypopigmentation or blister formation, and were rarely more serious, such as scarring and/or textural change. Advancements in laser technologies and their application in cutaneous medicine have revolutionized the field of laser surgery. Computational modeling provides evidence that the optimal pulse durations for tattoo ink removal are in the picosecond domain. It is recommended that the PicoSure(®) laser system continue to be used for safe and effective tattoo removal, including for red and yellow pigments.

  19. Elabela/Toddler Is an Endogenous Agonist of the Apelin APJ Receptor in the Adult Cardiovascular System, and Exogenous Administration of the Peptide Compensates for the Downregulation of Its Expression in Pulmonary Arterial Hypertension.

    Science.gov (United States)

    Yang, Peiran; Read, Cai; Kuc, Rhoda E; Buonincontri, Guido; Southwood, Mark; Torella, Rubben; Upton, Paul D; Crosby, Alexi; Sawiak, Stephen J; Carpenter, T Adrian; Glen, Robert C; Morrell, Nicholas W; Maguire, Janet J; Davenport, Anthony P

    2017-03-21

    Elabela/toddler (ELA) is a critical cardiac developmental peptide that acts through the G-protein-coupled apelin receptor, despite lack of sequence similarity to the established ligand apelin. Our aim was to investigate the receptor pharmacology, expression pattern, and in vivo function of ELA peptides in the adult cardiovascular system, to seek evidence for alteration in pulmonary arterial hypertension (PAH) in which apelin signaling is downregulated, and to demonstrate attenuation of PAH severity with exogenous administration of ELA in a rat model. In silico docking analysis, competition binding experiments, and downstream assays were used to characterize ELA receptor binding in human heart and signaling in cells expressing the apelin receptor. ELA expression in human cardiovascular tissues and plasma was determined using real-time quantitative polymerase chain reaction, dual-labeling immunofluorescent staining, and immunoassays. Acute cardiac effects of ELA-32 and [Pyr 1 ]apelin-13 were assessed by MRI and cardiac catheterization in anesthetized rats. Cardiopulmonary human and rat tissues from PAH patients and monocrotaline- and Sugen/hypoxia-exposed rats were used to show changes in ELA expression in PAH. The effect of ELA treatment on cardiopulmonary remodeling in PAH was investigated in the monocrotaline rat model. ELA competed for binding of apelin in human heart with overlap for the 2 peptides indicated by in silico modeling. ELA activated G-protein- and β-arrestin-dependent pathways. We detected ELA expression in human vascular endothelium and plasma. Comparable to apelin, ELA increased cardiac contractility, ejection fraction, and cardiac output and elicited vasodilatation in rat in vivo. ELA expression was reduced in cardiopulmonary tissues from PAH patients and PAH rat models, respectively. ELA treatment significantly attenuated elevation of right ventricular systolic pressure and right ventricular hypertrophy and pulmonary vascular remodeling in

  20. Conceptual basis for the european sustainability footprint

    OpenAIRE

    PELLETIER NATHANIEL; MAAS Rob; GORALCZYK MALGORZATA; WOLF Marc-Andree

    2012-01-01

    Sustainability is central to the policy objectives of the European Commission (EC), but a widely accepted integrated sustainability assessment framework in support of policy analysis and development is currently lacking. Here, we describe the conceptual basis for the proposed European Sustainability Footprint (ESF) - an integrated sustainability assessment framework for establishing a baseline and tracking trends with respect to the sustainability of European production and consumption. This ...

  1. The utilization of high-intensity lasers

    International Nuclear Information System (INIS)

    Fabre, E.

    1988-01-01

    The 1988 progress report of the laboratory for the Utilization of High-Intensity Lasers (Polytechnic School, France), is presented. The research program is focused on the laser-plasma physics, on the generation of high pressures by means of laser shock heating, on the laser spectroscopy and on the laser implosions. Numerical simulation codes are developed. Concerning the atomic physics, the investigations on dense plasmas and the x-laser research developments are carried out. The research activities of the laboratory teams, the published papers, the national and international cooperations, are given [fr

  2. The European Communities (Definition of Treaties) (No.5) (Joint European Torus) Order 1978 (S.I. no.1032)

    International Nuclear Information System (INIS)

    1978-01-01

    This Order declares the Exchange of Letters dated 3 May 1978 between the Government of the United Kingdom and the European Atomic Energy Community regarding privileges to be granted to the Joint European Torus to be a Community Treaty as defined in section 1(2) of the European Communities Act 1972. The principal effect of declaring this Exchange of Letters to be a Community Treaty as so defined is to bring into play, in relation to the Exchange of Letters, the provisions of section 2 of the European Communities Act 1972 [fr

  3. EUROPEAN DEVELOPMENT OF ECO‐MANAGEMENT AND AUDIT SCHEME (EMAS IN THE EUROPEAN UNION

    Directory of Open Access Journals (Sweden)

    Justyna SŁONIMIEC

    2013-10-01

    Full Text Available The paper presents the implementation of the Environmental Management and Audit Scheme System (EMAS in Poland and the European Union. It analyzes the existing rules on the implementation and the process of its implementation. It also defines the benefits and costs arising from the registration of organizations in the system. The paper presents the current status of implementation of EMAS in the European Union.

  4. Report on the behalf of the Commission for Foreign Affairs on: - the bill project, adopted by the Senate, authorizing the ratification of the Convention related to the construction and the exploitation of a European free electron laser operating in the X-ray range, and - the bill project, adopted by the Senate, authorizing the approval of the convention related to the construction and the exploitation of an infrastructure for the research on anti-protons and ions in Europe - Nr 1165 and Nr 1166 and appendix: text by the Commission for Foreign Affairs

    International Nuclear Information System (INIS)

    Baumel, Philippe

    2013-01-01

    This report first discusses how these two conventions (the one related to the construction and the exploitation of a European free electron laser operating in the X-ray range (in Hamburg, DE), and the one related to the construction and the exploitation of an infrastructure for the research on anti-protons and ions in Europe (in Darmstadt, DE)) will allow the French scientific community to access advanced infrastructures. It presents these infrastructures and outlines the several application perspectives, i.e. for the FAIR project and the European XFEL project. It comments the similar construction and exploitation conditions in terms of statutes (for the FAIR and XFEL companies, and for the personnel), and outlines that the financial burden will be governed and limited as far as the construction as well as the exploitation costs are concerned

  5. Recent highlights of the PALS research program

    Czech Academy of Sciences Publication Activity Database

    Jungwirth, Karel

    2005-01-01

    Roč. 23, - (2005), s. 177-182 ISSN 0263-0346. [ECLIM 2004: European Conference on Laser Interaction with Matter /28./. Roma, 06.09.2004-10.09.2004] R&D Projects: GA AV ČR(CZ) KSK2043105; GA MŠk(CZ) LN00A100 Grant - others:European Commission(XE) HPRI-CT-1999-00053 Institutional research plan: CEZ:AV0Z10100523 Keywords : ablation * Iodine lasers * laser ion sources * laser-produced plasma * laser-target interaction * PALS * shock waves * XUV lasers Subject RIV: BH - Optics, Masers, Lasers Impact factor: 2.590, year: 2005

  6. Relatedness and diversification in the European Union (EU-27) and European Neighbourhood Policy countries

    NARCIS (Netherlands)

    Boschma, Ron; Capone, Gianluca

    2016-01-01

    This paper analyzes the process of industrial diversification in the countries that were part of the European Union (EU-27) and those that were the target of the European Neighbourhood Policy (ENP) in the period 1995–2010 by means of world trade data derived from the BACI database (elaborated UN

  7. Uniting the Divided Continent. The Estonian National Committee of the European Movement

    Directory of Open Access Journals (Sweden)

    Pauli Heikkilä

    2010-12-01

    Full Text Available The article examines the exiled Estonian politicians in the European Movement in the early Cold War period. The ultimate goal of exiled Estonians was to restore their state’s independence. In order to promote this, Estonian leaders sought connections with Western leaders. The European Movement was the only organisation involving actors from both the East and the West, and this corresponded to the Estonian discourse on Europe as a whole. Therefore, the European Movement was appreciated, although its limited opportunities for decisive actions were also recognised. East and West European interest in the European Movement declined as West European integration rapidly intensified through the European Coal and Steel Community (ECSC and particularly after the January 1952 Eastern European Conference in London. By 1957, disappointment in the inability of European unification to help regain Estonian independence became evident.

  8. The EFQM excellence model: European and Dutch experiences with the EFQM approach in health care. European Foundation for Quality Management

    NARCIS (Netherlands)

    Nabitz, U.; Klazinga, N.; Walburg, J.

    2000-01-01

    One way to meet the challenges in creating a high performance organization in health care is the approach of the European Foundation for Quality Management (EFQM). The Foundation is in the tradition of the American Malcolm Baldrige Award and was initiated by the European Commission and 14 European

  9. Advanced excimer-based crystallization systems for production solutions

    International Nuclear Information System (INIS)

    Simon, F.; Brune, J.; Herbst, L.

    2006-01-01

    Line beam excimer laser annealing (ELA) is a well-known technique for thin Si-film crystallization and established in LTPS mass production. With introduction of sequential lateral solidification (SLS) some aspects such as crystalline quality, throughput and flexibility regarding the substrate size could be improved, but for OLED manufacturing still further process development is necessary. This paper discusses line beam ELA and SLS-techniques that might enable process engineers to make polycrystalline-silicon (poly-Si) films with a high degree of uniformity and quality as required for system on glass (SOG) and active matrix organic light emitting displays (AMOLED). Equipment requirements are discussed and compared to previous standards. SEM-images of process examples are shown in order to demonstrate the viability

  10. The European COPHES/DEMOCOPHES project

    DEFF Research Database (Denmark)

    Schindler, Birgit Karin; Esteban, Marta; Koch, Holger Martin

    2014-01-01

    COPHES/DEMOCOPHES has its origins in the European Environment and Health Action Plan of 2004 to "develop a coherent approach on human biomonitoring (HBM) in Europe". Within this twin-project it was targeted to collect specimens from 120 mother-child-pairs in each of the 17 participating European...... was specially prepared from native, non-spiked, pooled urine samples and was tested for homogeneity and stability. Four external quality assessment exercises were carried out. Highly esteemed laboratories from all over the world served as reference laboratories. Web conferences after each external quality...... analytical shortcomings in the determination of Cd when using certain ICP/MS methods. Results were corrected by reanalyzes. The COPHES/DEMOCOPHES project for the first time succeeded in performing a harmonized pan-European HBM project. All data raised have to be regarded as utmost reliable according...

  11. Quality standards of the European Pharmacopoeia.

    Science.gov (United States)

    Bouin, Anne-Sophie; Wierer, Michael

    2014-12-02

    The European Pharmacopoeia (Ph. Eur.) provides a legal and scientific reference for the quality control of medicines. It is legally binding in the 38 signatory parties of the Convention on the elaboration of a European Pharmacopoeia (37 member states and the European Union). The requirements for a specific herbal drug are prescribed in the corresponding individual monograph and the relevant general monographs. Criteria for pesticides and heavy metals for example are defined in the general monograph on Herbal drugs. The Ph. Eur. also provides general methods including methods for determination of aflatoxins B1 and ochratoxin A. Screening methods for aristolochic acids are applied for herbal drugs that may be subject to adulteration or substitution with plant material containing aristolochic acids. The Ph. Eur. collaborate in many areas with the European Medicines Agency (EMA) to ensure close collaboration as regards the respective work programmes and approach. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  12. The application of laser plasma in ophthalmology

    International Nuclear Information System (INIS)

    He Yujiang; Luo Le; Sun Yabing

    2000-01-01

    The production and development of laser plasma are introduced, and the contribution of laser biomedicine and laser plasma technology to ophthalmology is analyzed. The latest three progresses (laser photocoagulation, photo-refractive keratotomy and laser iridectomy) of laser plasma applications in ophthalmology are presented

  13. Application of Various Lasers to Laser Trimming Resistance System

    Institute of Scientific and Technical Information of China (English)

    SUN Ji-feng

    2007-01-01

    Though the laser trimming resistance has been an old laser machining industry for over 30 years, the development of technology brings new alternative lasers which can be used for the traditional machining. The paper describes application of various lasers to laser trimming resistance system including early traditional krypton arc lamp pumped Nd:YAG to laser, modern popular diode pumped solid state laser and the present advanced harmonic diode pumped solid state laser. Using the new alternative lasers in the laser trimming resistance system can dramatically improve the yields and equipment performance.

  14. The European Respiratory Society spirometry tent

    DEFF Research Database (Denmark)

    Maio, Sara; Sherrill, Duane L; MacNee, William

    2012-01-01

    In order to raise public awareness of the importance of early detection of airway obstruction and to enable many people who had not been tested previously to have their lung function measured, the European Lung Foundation and the European Respiratory Society (ERS) organised a spirometry testing...

  15. Laser system using ultra-short laser pulses

    Science.gov (United States)

    Dantus, Marcos [Okemos, MI; Lozovoy, Vadim V [Okemos, MI; Comstock, Matthew [Milford, MI

    2009-10-27

    A laser system using ultrashort laser pulses is provided. In another aspect of the present invention, the system includes a laser, pulse shaper and detection device. A further aspect of the present invention employs a femtosecond laser and binary pulse shaping (BPS). Still another aspect of the present invention uses a laser beam pulse, a pulse shaper and a SHG crystal.

  16. The European automotive LPG market

    International Nuclear Information System (INIS)

    Anon.

    1998-01-01

    The European automotive LPG market could reach at least 4 % of the European fuel market in 2005 versus 1 % in 1990. This would represent a rise of about 35 % in automotive LPG sales (from 2,4 million tonnes in 1997 to 7 million tonnes estimated for 2005). This was underlined by Alain Deleuse, Primagaz group's Marketing Director, in the paper he delivered at the AEGPL Budapest Convention. We publish large excepts of this paper. (author)

  17. The Rise and Fall of the European Dream

    Directory of Open Access Journals (Sweden)

    Joseph W.H. Lough

    2015-10-01

    Full Text Available The European Dream is often portrayed as the benign if not benevolent counterpart to the fading American Dream. Yet, as economic historian Joseph Lough shows in this essay, the European and American dreams are linked by more than their shared embrace of free market capitalism. In this essay Professor Lough exposes the darker side of the European Dream, a side first expressed in the 1990s, but now fully revealed in Europe’s conflict with Greece. As Professor Lough shows, this dark side of the European Dream was already present at its birth in the 19th century, when GWF Hegel allegorized its birth and diffusion through a story about the Self-Moving Substance that is Subject. This story has received mathematically rigorous validation through convergence theories of today’s neoclassical and neoliberal economists. Yet is total domination by this Self-Moving Substance inevitable, much less desirable? Professor Lough shows how Europe could adopt an alternative, more sustainable European Dream to meet today’s pressing challenges.

  18. The european union as subjects of law

    Directory of Open Access Journals (Sweden)

    Fila R.

    2012-10-01

    Full Text Available At the international level it is recognized that development and progress of the new and unique international organization – European Union – is one of the appropriate form of the international organization’s integration. Although European Union was establish as international economic organization, it has gradually integrated the various “best practices” ideas from different governmental systems. Encouragement and motives for cooperation of Member states indicate that member states give more competences of government to the international organization’s institutes. Wherewith, it is observed that the economic and political internationalization has led to disappearance of integrity of territory of member states. The above mentioned opinion is not based on research of the European Union as international organization from standpoint of international law, but from standpoint of theory law – could give juridical estimate regarding executive power in European Union and who could define particular source and entity of administrative law of European Union.

  19. European commission - 7th framework programme. The collaborative project on European sodium fast reactor (CP ESFR)

    International Nuclear Information System (INIS)

    Fiorini, G.L.

    2009-01-01

    The paper summarizes the key characteristics of the four years large Collaborative Project on European Sodium Fast Reactor (CP ESFR - 2009-2012); the CP ESFR follows the 6th FP project named 'Roadmap for a European Innovative SOdium cooled FAst Reactor - EISOFAR' further identifying, organizing and implementing a significant part of the needed R and D effort. The CP ESFR merges the contribution of 25 european partners; it will be realized under the aegis of the 7th FP under the Area - Advanced Nuclear Systems with a refund from the European Commission of 5.8 M euro (11.55 M euro total budget). It will be a key component of the European Sustainable Nuclear Energy Technology Platform (SNE TP) and its Strategic Research Agenda (SRA). The inputs for the project are the key research goals for fourth generation of European sodium cooled fast reactors which can be summarized as follow: an improved safety with in particular the achievement of a robust architecture vis a vis of abnormal situations and the robustness of the safety demonstrations; the guarantee of a financial risk comparable to that of the other means of energy production; a flexible and robust management of the nuclear materials and especially the waste reduction through the Minor Actinides burning. (author)

  20. Bill authorizing the ratification of the protocol amending the Protocol on transitional provisions annexed to the Treaty on European Union, to the Treaty on the Functioning of the European Union and to the Treaty establishing the European Atomic Energy Community

    International Nuclear Information System (INIS)

    2010-01-01

    After an indication of the European Parliament composition, this text describes the transitional provisions adopted as the Lisbon Treaty did not come into effect before the European elections held in June 2009. The document also provides the protocol text signed by the Members States and which amended the protocol on transitional provisions annexed to the Treaty on the European Union, to the Treaty on the Functioning of the European Union and to the Treaty establishing the European Atomic Energy Community. The last part of the document discusses the administrative and legal consequences of this protocol. It also recalls the history of the negotiations and indicates the present status of signatures and ratifications

  1. Evaluating and projecting the European security system

    International Nuclear Information System (INIS)

    Dean, J.

    1991-01-01

    Components of the new European security system are described taking into account the new policy making and possibilities to resolve conflicts. Programmes for political and economic integration and co-operation managed by the European Community will provide main positive content of the new European security system. An insight of the future of nuclear armaments in Europe is included together with confidence building measure and the role of NATO

  2. The development and deployment of a ground-based, laser-induced fluorescence instrument for the in situ detection of iodine monoxide radicals

    Energy Technology Data Exchange (ETDEWEB)

    Thurlow, M. E., E-mail: thurlow@huarp.harvard.edu; Hannun, R. A.; Lapson, L. B.; Anderson, J. G. [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States); Co, D. T. [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States); Argonne-Northwestern Solar Energy Research Center and Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208-3113 (United States); O' Brien, A. S. [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States); Department of Civil and Environmental Engineering, Princeton University, Princeton, New Jersey 08544 (United States); Hanisco, T. F. [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States); NASA Goddard Space Flight Center, Code 614, Greenbelt, Maryland 20771 (United States)

    2014-04-15

    High abundances of iodine monoxide (IO) are known to exist and to participate in local photochemistry of the marine boundary layer. Of particular interest are the roles IO plays in the formation of new particles in coastal marine environments and in depletion episodes of ozone and mercury in the Arctic polar spring. This paper describes a ground-based instrument that measures IO at mixing ratios less than one part in 10{sup 12}. The IO radical is measured by detecting laser-induced fluorescence at wavelengths longer that 500 nm. Tunable visible light is used to pump the A{sup 2}Π{sub 3/2} (v{sup ′} = 2) ← X{sup 2}Π{sub 3/2} (v{sup ″} = 0) transition of IO near 445 nm. The laser light is produced by a solid-state, Nd:YAG-pumped Ti:Sapphire laser at 5 kHz repetition rate. The laser-induced fluorescence instrument performs reliably with very high signal-to-noise ratios (>10) achieved in short integration times (<1 min). The observations from a validation deployment to the Shoals Marine Lab on Appledore Island, ME are presented and are broadly consistent with in situ observations from European Coastal Sites. Mixing ratios ranged from the instrumental detection limit (<1 pptv) to 10 pptv. These data represent the first in situ point measurements of IO in North America.

  3. The development and deployment of a ground-based, laser-induced fluorescence instrument for the in situ detection of iodine monoxide radicals

    International Nuclear Information System (INIS)

    Thurlow, M. E.; Hannun, R. A.; Lapson, L. B.; Anderson, J. G.; Co, D. T.; O'Brien, A. S.; Hanisco, T. F.

    2014-01-01

    High abundances of iodine monoxide (IO) are known to exist and to participate in local photochemistry of the marine boundary layer. Of particular interest are the roles IO plays in the formation of new particles in coastal marine environments and in depletion episodes of ozone and mercury in the Arctic polar spring. This paper describes a ground-based instrument that measures IO at mixing ratios less than one part in 10 12 . The IO radical is measured by detecting laser-induced fluorescence at wavelengths longer that 500 nm. Tunable visible light is used to pump the A 2 Π 3/2 (v ′ = 2) ← X 2 Π 3/2 (v ″ = 0) transition of IO near 445 nm. The laser light is produced by a solid-state, Nd:YAG-pumped Ti:Sapphire laser at 5 kHz repetition rate. The laser-induced fluorescence instrument performs reliably with very high signal-to-noise ratios (>10) achieved in short integration times (<1 min). The observations from a validation deployment to the Shoals Marine Lab on Appledore Island, ME are presented and are broadly consistent with in situ observations from European Coastal Sites. Mixing ratios ranged from the instrumental detection limit (<1 pptv) to 10 pptv. These data represent the first in situ point measurements of IO in North America

  4. Exploring the premises of European education systems

    DEFF Research Database (Denmark)

    Moutsios, Stavros

    This paper (part of a project carried out under the EU’s Marie Curie programme of Intra-European Fellowships, FP7-People-2011-IEF, CETH, 298656) explores the emergence of the European education systems in Modernity. As the paper argues, the institution of education in Europe was associated....... Understanding the historical premises of European education would allow us to understand the trajectory that education systems have had till today, in Europe and beyond........ This fundamental antinomy, between autonomy and rational control, explicated by Castoriadis, constitutes the very particularity of the European imaginary, which has been incarnated, as the paper argues, in the institution of education since the Enlightenment – although its first traces appeared much earlier...

  5. The Parliamentary Legitimacy of the European Union: The Role of the States General within the European Union

    Directory of Open Access Journals (Sweden)

    Leonard F.M. Besselink

    2012-01-01

    Full Text Available This article presents the state of play in the Netherlands with regard to parliamentary scrutiny in EU decision-making. Although the States General have all in all dealt with EU decision-making fairly actively, this contribution makes clear that Parliament's activity has not been able to offset the increased executive dominance in matters of European integration. The abolition of the consent requirement had immediate negative effects on the information position of Parliament, which is crucial for the attempts by Parliament to counteract the increased executive dominance. Furthermore, the aspect of Parliament's role in the legitimacy of the EU itself is discussed. The 'European instruments', such as the subsidiarity review, the Barroso initiative and the access of parliaments to the European Court of Justice have some general shortcomings. Practice shows, however, that most of these instruments have been used, though with different degrees of intensity and continuity in the two Houses of Parliament and their different parliamentary committees.

  6. The European Court of Justice and the National Interests of the European Union’s Member States

    Directory of Open Access Journals (Sweden)

    Тетяна Комарова

    2016-09-01

    Full Text Available The article is devoted to the research of CJEU’s practice concerning the interpretation of national interests of the European Union’s Member States in resolving disputes submitted for its consideration. Analyzed decisions of the CJEU allows to trace its position on the matter and the evolution of practices regarding the balance between different interests – the interests of the Union and the States. Also in article there are analyzed actual problems of the modern European Union law (human rights, free enterprise, etc., its institutional system and direct the judicial authorities in the EU. For modern evolution of the EU it is highly important to have orientation not only on common interests of the EU but on interests of members states. In the late jurisprudence of the Court of Justice of the European Union there is a tendency of retreating from strict practice of favoring only to interests of the EU and interpreting interests of members states in order to find the balance between two types of interest especially after amendments of Lisbon treaty. In the context of this research it should be noted that the Court of Justice of the European Union during interpretation of national interests of member states uses the principle of self-restriction in interpretation of law. Herewith the Court quite flexible uses this principle and this leads to appearance of new highly important precedents.  It should be underlined that the Court has a negative to the application of acte claire doctrine because of some risk of been bound to act only in one direction without taking into consideration any possible changes of judicial practice in future. The conclusion is made that for the strengthening of European integration it is highly important not only the jurisprudence of the Court, but the activity of constitutional courts of member states and also their parliaments, which under Lisbon treaty got a lot of democratic competences. Exactly the cooperation of

  7. The suppression of radiation reaction and laser field depletion in laser-electron beam interaction

    Science.gov (United States)

    Ong, J. F.; Moritaka, T.; Takabe, H.

    2018-03-01

    The effects of radiation reaction (RR) have been studied extensively by using the interaction of ultraintense lasers with a counter-propagating relativistic electron. At the laser intensity at the order of 1023 W/cm2, the effects of RR are significant in a few laser periods for a relativistic electron. However, a laser at such intensity is tightly focused and the laser energy is usually assumed to be fixed. Then, the signal of RR and energy conservation cannot be guaranteed. To assess the effects of RR in a tightly focused laser pulse and the evolution of the laser energy, we simulated this interaction with a beam of 109 electrons by means of a Particle-In-Cell method. We observe that the effects of RR are suppressed due to the ponderomotive force and accompanied by a non-negligible amount of laser field energy reduction. This is because the ponderomotive force prevents the electrons from approaching the center of the laser pulse and leads to an interaction at the weaker field region. At the same time, the laser energy is absorbed through ponderomotive acceleration. Thus, the kinetic energy of the electron beam has to be carefully selected such that the effects of RR become obvious.

  8. The laser integration line (LIL)

    International Nuclear Information System (INIS)

    Roussel, A.

    2006-01-01

    The laser integration line (LIL) was originally built to validate the technological choices made for the Megajoule laser that is being built nearby. The LIL is made up of a single line composed of 8 laser beams. Each laser beam consists of 4 main modules: 1) the impulse generator that delivers a 40 mm * 40 mm square cross section infrared laser beam (λ = 1053 nm); 2) the amplification module that involves 2 steps in power amplifying, the output signal is a laser impulse of 5 ns of time duration carrying an energy of 20.10 3 Joule at a wavelength of 1053 nm; 3) the transport line that leads 4 elementary laser beams through a system of 6 mirrors; and 4) the optical block of the focusing and frequency conversion system (SCF). The purpose of SCF is twofold, first to turn the 4 infrared elementary beams into 4 ultraviolet (λ = 351 nm) beams thanks to 2 KDP (potassium di-hydrogeno-phosphate) crystals, and secondly to merge and focus the 4 elementary beams on a unique spot of the target thanks to diffraction gratings with curved slits. (A.C.)

  9. European Commission and IAEA Celebrate 30 Years Co-operation on Nuclear Safeguards

    International Nuclear Information System (INIS)

    2011-01-01

    Full text: Today the European Commission and the International Atomic Energy Agency (IAEA) celebrate 30 years of cooperation in the safeguarding of nuclear materials and facilities. This anniversary is marked by an event at the AEA Headquarters in Vienna. The Joint Research Centre (JRC) of the European Commission has provided scientific and echnical support to the work of IAEA since 1981, with over 100 scientists and technicians working on more than 25 projects. The anniversary is also an opportunity for both parties to plan their future joint activities. ''Nuclear safety and security are absolute priorities for the EU and in this context expertise on nuclear safeguards is extremely important for global security,'' says Dominique Ristori, Director General of the Joint Research Centre. ''The JRC is constantly at work on state-of-the-art technologies for nuclear safeguards and training of nuclear inspectors to stay ahead of the evolving challenges, in its long-standing cooperation in support of the Agency's mission.'' ''The JRC has provided us with vital scientific and technical support which has helped us to implement safeguards more effectively,'' said Herman Nackaerts, Deputy Director General for Safeguards at the IAEA. ''This has had a positive impact on the security of all the citizens of the European Union and beyond.'' An important chapter in the collaboration between the two organisations is training: high-quality training programmes are provided by the JRC for the next generation of IAEA and EURATOM Inspectors. Other examples of cooperation include special tools to improve environmental particle analysis, a 3D laser-based verification system of nuclear facilities, new nuclear reference materials, and secure sealing for underwater nuclear spent fuel assemblies. Future cooperation between the JRC and IAEA will be in line with the new priorities of the IAEA to further increase the safeguards' effectiveness and efficiency, through a customized approach

  10. Lasers probe the atomic nucleus

    International Nuclear Information System (INIS)

    Eastham, D.

    1986-01-01

    The article is contained in a booklet on the Revised Nuffield Advanced Physics Course, and concentrates on two techniques to illustrate how lasers probe the atomic nucleus. Both techniques employ resonance fluorescence spectroscopy for obtaining atomic transition energies. The first uses lasers to determine the change in the nuclear charge radius with isotope, the second concerns the use of lasers for ultrasensitive detection of isotopes and elements. The application of lasers in resonance ionization spectroscopy and proton decay is also described. (UK)

  11. Dependence of Parameters of Laser-Produced Au Plasmas on the Incident Laser Energy of Sub-Nanosecond and Picosecond Laser Pulses

    International Nuclear Information System (INIS)

    Woryna, E.; Badziak, J.; Makowski, J.; Parys, P.; Vankov, A.B.; Wolowski, J.; Krasa, J.; Laska, L.; Rohlena, K.

    2001-01-01

    The parameters of Au plasma as functions of laser energy for ps pulses are presented and compared with the ones for sub-ns pulses at nearly the same densities of laser energy. The experiments were performed at the IPPLM with the use of CPA (chirped pulse amplification) Nd:glass laser system. Thick Au foil targets were irradiated by normally incident focused laser beams with maximum intensities of 8x10 16 and 2x10 14 W/cm 2 for ps and sub-ns laser pulses, respectively. The characteristics of ion streams were investigated with the use of ion diagnostics methods based on the time-of flight technique. In these experiments the laser energies were changed in the range from 90 to 700 mJ and the measurements were performed at a given focus position FP = 0 and along the target normal for both the laser pulses. The charge carried by the ions, the maximum ion velocities of fast and thermal ion groups, the maximum ion current density as well as the area of photopeak in dependence on the incident laser energy for sub-ns and ps pulses were investigated and discussed. (author)

  12. Remote sensing vegetation status by laser-induced fluorescence

    International Nuclear Information System (INIS)

    Günther, K.P.; Dahn, H.G.; Lüdeker, W.

    1994-01-01

    In November 1989 the EUREKA project LASFLEUR (EU 380) started as an European research effort to investigate the future application of far-field laser-induced plant fluorescence for synoptic, airborne environmental monitoring of vegetation. This report includes a brief introduction in a theoretically approach for the laser-induced fluorescence signals of leaves and their spectral and radiometric behaviour. In addition, a detailed description of the design and realization of the second generation of the far-field fluorescence lidar (DLidaR-2) is given with special regard to the optical and electronical setup, followed by a short explanation of the data processing. The main objectives of the far field measurements are to demonstrate the link between laser-induced fluorescence data and plant physiology and to show the reliability of remote single shot lidar measurements. The data sets include the typical daily cycles of the fluorescence for different global irradiation. As expected from biophysical models, the remotely sensed chlorophyll fluorescence is highly correlated with the carbon fixation rate, while the fluorescence ratio F685 / F730 is only dependent on the chlorophyll concentration. Drought stress measurement of evergreen oaks Quercus pubescens confirm the findings of healthy plants with regard to the fluorescence ratio F685 / F730 while the fluorescence signals of stressed plants show a different behavior than nonstressed plants. Additionally, the corresponding physiological data (porometer and PAM data) are presented. (author)

  13. European mobility cultures

    DEFF Research Database (Denmark)

    Haustein, Sonja; Nielsen, Thomas A. Sick

    2016-01-01

    More targeted European policies promoting green travel patterns require better knowledge on differing mobility cultures across European regions. As a basis for this, we clustered the EU population into eight mobility styles based on Eurobarometer data. The mobility styles - including, for example...... positions on the path towards sustainable mobility and therefore different requirements towards European platforms and support measures, e.g. for 'Sustainable Urban Mobility Plans'. The country clusters can provide a starting point for future communication and targeting of European efforts in sustainable...

  14. Lasers in tattoo and pigmentation control: role of the PicoSure® laser system

    Directory of Open Access Journals (Sweden)

    Torbeck R

    2016-05-01

    Full Text Available Richard Torbeck,1 Richard Bankowski,2 Sarah Henize,3 Nazanin Saedi,11Department of Dermatology and Cutaneous Biology, Sidney Kimmel Medical College, Thomas Jefferson University, Philadelphia, PA, 2Cynosure, Inc, Westford, MA, 3Huron Consulting Group, Chicago, IL, USABackground and objectives: The use of picosecond lasers to remove tattoos has greatly improved due to the long-standing outcomes of nanosecond lasers, both clinically and histologically. The first aesthetic picosecond laser available for this use was the PicoSure® laser system (755/532 nm. Now that a vast amount of research on its use has been conducted, we performed a comprehensive review of the literature to validate the continued application of the PicoSure® laser system for tattoo removal.Study design and methods: A PubMed search was conducted using the term "picosecond" combined with "laser", "dermatology", and "laser tattoo removal".Results: A total of 13 articles were identified, and ten of these met the inclusion criteria for this review. The majority of studies showed that picosecond lasers are an effective and safe treatment mode for the removal of tattoo pigments. Several studies also indicated potential novel applications of picosecond lasers in the removal of various tattoo pigments (eg, black, red, and yellow. Adverse effects were generally mild, such as transient hypopigmentation or blister formation, and were rarely more serious, such as scarring and/or textural change.Conclusion: Advancements in laser technologies and their application in cutaneous medicine have revolutionized the field of laser surgery. Computational modeling provides evidence that the optimal pulse durations for tattoo ink removal are in the picosecond domain. It is recommended that the PicoSure® laser system continue to be used for safe and effective tattoo removal, including for red and yellow pigments.Keywords: tattoo, removal, laser, picosecond 

  15. The diversity of European energy policies

    International Nuclear Information System (INIS)

    2013-01-01

    If many European Union countries have engaged in a mutation of their energy system, the direction chosen may be different from one country to the other with different specific goals, starting from different initial energy mixes and involving different financial and industrial means. The German 'Energiewende' (the 'energy turn'), the Spanish 'Sostenibilidad Energetica' or the British 'Climate Change Bill' are unique initiatives which, without coordination, can lead to detrimental consequences on the European power system. These policies represent as many experiences to meditate on in order to identify the advantages and drawbacks of these different approaches as well as their respective impact on the European power system and on markets operation

  16. Laser optically pumped by laser-produced plasma

    International Nuclear Information System (INIS)

    Silfvast, W.T.; Wood, O.R. II.

    1975-01-01

    Laser solids, liquids and gases are pumped by a new technique in which the output from an efficient molecular laser, such as a CO 2 laser, ionizes a medium, such as xenon, into a generally cylindrical plasma volume, in proximity to the pumped laser body. Breakdown yields a visible and ultraviolet-radiation-emitting plasma in that volume to pump the laser body. The spectral radiance of the plasma is significantly higher than that produced by a dc-discharge-heated plasma at nearly all wavelengths in the plasma spectrum. The risetime of radiation from the laser-produced plasma can also be significantly shorter than that of a dc heated plasma. A further advantage resides in the fact that in some applications the attenuating walls needed by flashlamps may be eliminated with the result that laser threshold is more readily reached. Traveling wave excitation may be provided by oblique incidence of the pumping laser beam through the ionizable medium to create sequential ionization of portions of that medium along the length of the pumped laser body. (auth)

  17. Diode laser-pumped Ho:YLF laser

    International Nuclear Information System (INIS)

    Hemmati, H.

    1987-01-01

    The author reports laser action in Ho:YLF at 2.06 μm following optical pumping with a cw diode laser array. Diode laser-pumped Nd-YAG and Ho:YAG have been reported recently. Lasers with a wavelength of 2 μm have medical and optical communication applications. The diode laser light is focused with a 60-mm focal length lens onto the YLF crystal. A high-reflectivity mirror with 100-mm radius of curvature was used as the output coupler. The lasing threshold was at 5 mWof incident power. This is higher than expected considering that a high reflector was used as the output coupler. However, a more uniform cooling of the crystal is expected to lower the lasing threshold. With 100 mW of pump power coupled into the crystal, --20 mW of 2-μm radiation was observed from this unoptimized setup. The 2-μm laser output is highly sensitive to output coupler alignment, YLF crystal temperature, and pump laser wavelength. The 20% optical conversion efficiency achieved in his preliminary measurements is expected to be improved by better crystal cooling, proper matching of laser wavelength to crystal absorption, variations in the concentration of Ho and sensitizers and use of a proper output coupler. A study of the parameters mentioned above and the effect of crystal temperature on the laser output is under way

  18. The KAERI laser facility with temporal laser beam shaping for application's user

    International Nuclear Information System (INIS)

    Hong, Sung Ki; Kim, Min Suk; Kim, Young Won; Ko, Kwanghoon; Lim, Changhwan; Seo, Young Seok

    2008-01-01

    The Korea Atomic Energy Research Institute(KAERI)has been developed a high energy Nd:Glass laser facility(KLF)for fast ignition research and high energy physics applications at early 2008. Now, we are researching the temporal laser beam shaping for application's user. The temporal laser beam shaping has been applied to a number of industrial applications. The KLF beam shaping system with fiber based consists of two electro optic modulator with DC bias using a Mach Zehnder interferometer, an arbitrary electronic waveform generator, a continuous wavelength fiber laser source, a fiber based pulse amplification system and DC bias source to generate temporally shaped pulses with a high extinction ratio and high resolution. RF signal waveform user defined by an arbitrary electronic waveform generator is only connected to one electro optic modulator. DC bias source with auto feed back or manual controller is connected both two electro optic modulators. Emitting laser light from a continuous wavelength fiber laser source is modulated to meet a user defined laser pulse with a high extinction ratio by two electro optic modulators. Experimental results are shown in Fig.1. Figure 1(a)shows two programmed waveforms with the signal width 10ns in an arbitrary electronic waveform generator. Figure 1(b)shows output laser pulses with sub mJ energy from amplification results of the KLF beam shaping system which can control the pulse width ranges from 400ps to sub us

  19. European Consulting Survey 2012 : The Future of European Management Consulting Firms' Business Models

    OpenAIRE

    Kreutzer, Markus; Menz, Markus

    2012-01-01

    This study report provides European management consulting firms' assessment of trends and currently prevailing business models in the industry. It depicts the different threats and opportunities that consulting firms with different business models, consulting foci, sizes, leverage ratios, international orientations, and geographical footprints face; it also reveals these firms' adaptation strategies. Based on an analysis of a survey of 311 consulting firms from 26 European countries, the repo...

  20. A study of low power laser on the regenerative process of Girardia tigrina (Girard,1850 (Turbellaria; Tricladida; Dugesiidae Um estudo de laser de baixa potência no processo regenerativo de Girardia tigrina (Girard,1850 (Turbellaria; Tricladida; Dugesiidae

    Directory of Open Access Journals (Sweden)

    KAR. Lopes

    2009-05-01

    Full Text Available The mechanism of regeneration does not start to restore the wound until its corresponding epimorphic phase. A bioestimulation of tissues and cells by laser radiation depends on the wavelength, on the dose, and on the intensity of the light. The goal of this work was to verify the effect of the low power laser at 660 nm on the regenerative process of Girardia tigrina. The specimens were maintained in the laboratory under a temperature ranging from 19° up to 24 °C for 21 days. The planarians were anesthetized by placing them on ice and then cut them with a scalpel. The three treatments were as following: animals individually irradiated with 14 sessions with 1 minute duration (treatment 1, 14 sessions with 3 minutes duration (treatment 2, and without irradiation (control. The planarians were amputated and divided in three study treatments: a control group (without radiation, and two other treatments: irradiated for 1 minute, and irradiated for 3 minutes. The animals were irradiated with diode laser (660 nm with 3.3 ± 0.3 mW of power, using 0.94 mW.mm-2 power density for each irradiation procedure. During the experiment, 14 irradiation sessions were undertaken. The specimens were fixed in Bouin, and stained with hematoxyline and eosin. From observation and histological analysis, it was possible to assess the effects of interaction between laser and tissue. The head fragment after 1 minute of irradiation presented a better organized tissue scheme, when compared with the other treatments. Aspects of the body fragments submitted to 3 minutes of light treatment were very similar to fragments that had not been injured. It can be concluded that there are changes in the quality of regeneration when treated with low power laser under the conditions mentioned above.O mecanismo de regeneração não restaura a ferida até sua fase epimórfica correspondente. A bioestimulação de tecidos e células por radiação laser depende do comprimento de onda, da

  1. Selective Europeanization

    DEFF Research Database (Denmark)

    Hoch Jovanovic, Tamara; Lynggaard, Kennet

    2014-01-01

    and rules. The article examines the reasons for both resistance and selectiveness to Europeanization of the Danish minority policy through a “path dependency” perspective accentuating decision makers’ reluctance to deviate from existing institutional commitments, even in subsequently significantly altered...... political contexts at the European level. We further show how the “translation” of international norms to a domestic context has worked to reinforce the original institutional setup, dating back to the mid-1950s. The translation of European-level minority policy developed in the 1990s and 2000s works most...

  2. Large aperture Fizeau interferometer commissioning and preliminary measurements of a long x-ray mirror at European X-ray Free Electron Laser

    Energy Technology Data Exchange (ETDEWEB)

    Vannoni, M., E-mail: maurizio.vannoni@xfel.eu; Freijo Martín, I. [European XFEL GmbH, Albert-Einstein-Ring 19, 22761 Hamburg (Germany)

    2016-05-15

    The European XFEL (X-ray Free Electron Laser) is a large facility under construction in Hamburg, Germany. It will provide a transversally fully coherent x-ray radiation with outstanding characteristics: high repetition rate (up to 2700 pulses with a 0.6 ms long pulse train at 10 Hz), short wavelength (down to 0.05 nm), short pulse (in the femtoseconds scale), and high average brilliance (1.6 ⋅ 10{sup 25} (photons s{sup −1} mm{sup −2} mrad{sup −2})/0.1% bandwidth). The beam has very high pulse energy; therefore, it has to be spread out on a relatively long mirror (about 1 m). Due to the very short wavelength, the mirrors need to have a high quality surface on their entire length, and this is considered very challenging even with the most advanced polishing methods. In order to measure the mirrors and to characterize their interaction with the mechanical mount, we equipped a metrology laboratory with a large aperture Fizeau interferometer. The system is a classical 100 mm diameter commercial Fizeau, with an additional expander providing a 300 mm diameter beam. Despite the commercial nature of the system, special care has been taken in the polishing of the reference flats and in the expander quality. We report the first commissioning of the instrument, its calibration, and performance characterization, together with some preliminary results with the measurement of a 950 mm silicon substrate. The intended application is to characterize the final XFEL mirrors with nanometer accuracy.

  3. Electron emission from laser irradiating target normal sheath acceleration (TNSA)

    Czech Academy of Sciences Publication Activity Database

    Torrisi, L.; Cutroneo, Mariapompea

    2016-01-01

    Roč. 171, 9-10 (2016), s. 754-765 ISSN 1042-0150. [12th Workshop on European Collaboration for Higher Education and Research in Nuclear Engineering and Radiological Protection. Bologna, Catania, Milan, 30.05.2016-01.06.2016] R&D Projects: GA ČR(CZ) GBP108/12/G108; GA MŠk LM2015056 Institutional support: RVO:61389005 Keywords : electron emission from plasma * TNSA * TOF * SiC * plastic scintillator * Thomson parabola spectrometer Subject RIV: BH - Optics, Masers, Lasers Impact factor: 0.443, year: 2016

  4. Advances in lasers and optical micro-nano-systems

    Science.gov (United States)

    Laurell, F.; Fazio, E.

    2010-09-01

    manipulation of the writing-reading optical beam can push holography toward storages at higher data densities, as presented by Norihiko Ishii et al (Wavefront compensation method using novel index in holographic data storage). Along a similar direction Furlan et al describe a very innovative technique for producing optical traps using novel Devil micro-lenses (Volumetric multiple optical traps produced by Devil's lenses). Vynnyk et al presented an interesting application of electron microscopy for monitoring sub-micrometric structures in 3D configurations (3D-measurement with the stereo scanning electron microscope on sub-micrometer structure). Finally, S. Rao et al present two interesting papers on integrated structures compatible with silicon technology: one describes the realisation of low-loss waveguides using amorphous silicon, a relatively novel material with many applications in very different domains (Low-loss amorphous silicon waveguid! es grown by PECVD on indium tin oxide), and one on the realisation of a electrically drivable device with affective compatibility with CMOS technology (Electro-optical modulating multistack device based on the CMOS-compatible technology of amorphous silicon). We hope that this special issue of the Journal of the European Optical Society will reflect the interest of the European Scientific Community toward these fundamental and applied topics and will demonstrate to readers some of the actual directions of research. We express our full appreciation to the authors that participated to this initiative which acts only as a primer for the vast amount of work now being undertaken in laser physics and applications in micro- and nano-systems. We would like to give a special thank to the paper reviewers for their important role in the paper selection process and all the journal staff for their very professional support, dedication and energy, which made this special issue feasible.

  5. A European legal method? On European private law and scientific method

    NARCIS (Netherlands)

    Hesselink, M.

    2009-01-01

    This article examines the relationship between European private law and scientific method. It argues that a European legal method is a good idea. Not primarily because it will make European private law scholarship look more scientific, but because a debate on the method of a normative science

  6. The radiological exposure of the population of the European Community from radioactivity in North European marine waters Project 'Marina'

    International Nuclear Information System (INIS)

    1990-01-01

    Project Marina was set up by the Commission of the European Communities in 1985 to look at the radiological impact of radionuclides, both natural and anthropogenic, in northern European marine waters. This paper is a summary of project Marina's work and its conclusions

  7. European Capitals of Culture: A “soft power” resource for the European Union?

    Directory of Open Access Journals (Sweden)

    Alexandros Sianos

    2017-02-01

    Full Text Available Using English-language newspaper articles retrieved from digital repositories, this paper examines the cultural asymmetrical encounter between Western and Eastern Europe after 1989. It argues that due to the rise of the Iron Curtain after 1948 and the post-war progress of the Western European integration project after 1950, the idea of “Europe” was confined to the West until 1989. After 1989, however, the Eastern European nations were free to “return to Europe”, and in order to do so they followed the “reference model” of the West. The paper takes the institution of the European Capital of Culture (ECOC as a case study and demonstrates how both Western and Eastern European cities used the ECOC title as a gateway to modernity, why it acquired an extra functionality in the East as a stage where they could showcase their “European” credentials, and how it gradually developed into one of the E.U.’s “soft power” resources.

  8. The new architecture of the European Union

    Directory of Open Access Journals (Sweden)

    Radivojević Zoran

    2011-01-01

    Full Text Available The Lisbon Treaty has brought significant changes into the architecture of the European Union. The most important novelty, however, is the establishment of a full unity of the Union structure achieved by creating new and strengthening the existing elements. The new elements of this unity are the disappearance of the European Community, the 'independence' of the European Atomic Energy Community, constituting the European Union as a single entity and the introduction of EU values. At the same time, the Lisbon Treaty has strengthened the existing elements of the common institutional mechanisms, rules on amending the founding treaties and EU membership. However, constituting the Union as a single entity which has replaced and succeeded the European Communities has not abolished the EU elements of diversity. In the areas that differed, even before the adoption of the Lisbon Treaty, from the community pillar, there remain significant differences in the nature and the scope of competences of the Union institutions. This mainly regards the common foreign and security policy, which now includes the defense policy, where the existing model of inter-state cooperation has been only slightly interfered with. In contrast, in the field of police and judicial cooperation in criminal matters, which has become part of a larger Area of Freedom, Security and Justice, the inter-state model of cooperation has been abandoned in some of its most important elements. However, the implementation of some of the important elements of the supranational model has been postponed.

  9. The Rise and Fall of the European Dream

    OpenAIRE

    Lough, Joseph W.H.

    2015-01-01

    The European Dream is often portrayed as the benign if not benevolent counterpart to the fading American Dream. Yet, as economic historian Joseph Lough shows in this essay, the European and American dreams are linked by more than their shared embrace of free market capitalism. In this essay Professor Lough exposes the darker side of the European Dream, a side first expressed in the 1990s, but now fully revealed in Europe’s conflict with Greece. As Professor Lough shows, this dark side of the ...

  10. Laser cutting - trends in the development,

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    2002-01-01

    Since the laser was invented in 1960, the industrial applications of this tool has grown and grown. And - since the beginning of the 1980'ies, the major industrial application of lasers in production has been laser cutting. In this paper a short review of the development of the laser cutting...

  11. European Symposium on Precision Medicine in Allergy and Airways Diseases: Report of the European Union Parliament Symposium (October 14, 2015)

    NARCIS (Netherlands)

    Muraro, A.; Fokkens, W. J.; Pietikainen, S.; Borrelli, D.; Agache, I.; Bousquet, J.; Costigliola, V.; Joos, G.; Lund, V. J.; Poulsen, L. K.; Price, D.; Rolland, C.; Zuberbier, T.; Hellings, P. W.

    2016-01-01

    The European Academy of Allergy and Clinical Immunology (EAACI), the European Rhinologic Society (ERS), and the European Medical Association (EMA) organized, on October 14, 2015, a symposium in the European Parliament in Brussels on Precision Medicine in Allergy and Airways Diseases, hosted by MEP

  12. European symposium on the awareness of allergy: report of the promotional campaign in the European Parliament (26-28 April 2016).

    Science.gov (United States)

    Muraro, A; Steelant, B; Pietikainen, S; Borrelli, D; Childers, N; Callebaut, I; Kortekaas Krohn, I; Martens, K; Pugin, B; Popescu, F-D; Vieru, M; Jutel, M; Agache, I; Hellings, P W

    2017-02-01

    From 26 to 28 of April 2016, an allergy awareness campaign was organized by the European Academy of Allergy and Clinical Immunology and the European Federation of Allergy and Airway Diseases Patients Associations in the European Parliament in Brussels, with support of the European Parliament's Interest group on Allergy and Asthma and was co-hosted by the Members of the European Parliament David Borrelli, Sirpa Pietikainen and Nessa Childers. Skin prick tests (SPTs) were performed to gain attention for the increasing prevalence of allergic airway diseases in Europe. Since more than 30% of the total European population suffers from airway allergies and asthma, reaching a higher level of awareness and elaboration of an active prevention plan is mandatory. Of the 406 individuals undergoing SPT in the European Parliament, 211 participants (52%) reported to have suffered from an allergy in the past, with allergic symptoms being present in the nose and eyes (40% and 36%, respectively), the skin (27%), lower airways (14%) and the gut (8%). Of the 381 SPT with reliable results, cutaneous hypersensitivity was found in 201 (53%) participants. Of those with positive SPT (n = 201), 70 participants (35%) were monosensitized while 131 participants (65%) were polysensitized. The positive skin reactions were found mostly for grass pollen (n = 108), followed by Dermatophagoides pteronyssinus (n = 105), Dermatophagoides farina (n = 96) and birch pollen (n = 85). Of note, 54 individuals (14% of the total tested population) without reported allergy or allergic symptoms showed a positive SPT without clinical relevance. This report summarizes the main idea and goals of the symposium: chronic airway diseases are a major and growing health problem in Europe. Therefore, a joint preventive action plan needs to be developed for a better health status of European citizens. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  13. The chirped-pulse inverse free-electron laser: A high-gradient vacuum laser accelerator

    International Nuclear Information System (INIS)

    Hartemann, F.V.; Landahl, E.C.; Troha, A.L.; Van Meter, J.R.; Baldis, H.A.; Freeman, R.R.; Luhmann, N.C. Jr.; Song, L.; Kerman, A.K.; Yu, D.U.

    1999-01-01

    The inverse free-electron laser (IFEL) interaction is studied theoretically and computationally in the case where the drive laser intensity approaches the relativistic regime, and the pulse duration is only a few optical cycles long. The IFEL concept has been demonstrated as a viable vacuum laser acceleration process; it is shown here that by using an ultrashort, ultrahigh-intensity drive laser pulse, the IFEL interaction bandwidth and accelerating gradient are increased considerably, thus yielding large energy gains. Using a chirped pulse and negative dispersion focusing optics allows one to take further advantage of the laser optical bandwidth and produce a chromatic line focus maximizing the gradient. The combination of these novel ideas results in a compact vacuum laser accelerator capable of accelerating picosecond electron bunches with a high gradient (GeV/m) and very low energy spread. copyright 1999 American Institute of Physics

  14. A decade of experience with the European Company

    NARCIS (Netherlands)

    Cremers, J.; Stollt, M.; Vitols, S.

    2013-01-01

    A little more than a decade ago one of the most significant developments in European company law and worker participation occurred: the European Union passed a Regulation and Directive on the European Company (or Societas Europaea, hereafter SE). This legislation is a major innovation in that it

  15. Coordination in the European Union

    OpenAIRE

    Martin Feldstein

    2013-01-01

    This paper examines the sources of current conflict within the EU and the EMU. The topics discussed include the recent ECB policy of bond buying (the OMT policy), the attempts to advance the "European Project" of stronger political union (the fiscal compact, the banking union, and the proposals for budget supervision). Contrary to the claims of the European leadership, the progress that has been made has been by individual countries and not by coordinated action. The special problems of Franc...

  16. Development of frequency tunable Ti:sapphire laser and dye laser pumped by a pulsed Nd:YAG laser

    International Nuclear Information System (INIS)

    Yi, Jong Hoon; Horn, Roland; Wendt, K.

    2001-01-01

    We investigated lasing characteristics of two kinds of tunable laser, liquid dye laser and solid Ti:sapphire crystal laser, pumped by high pulse repetition rate Nd:YAG laser. Dye laser showed drastically reduced pulsewidth compared with that of pump laser and it also contained large amount of amplified spontaneous emission. Ti:sapphire laser showed also reduced pulsewidth. But, the laser conversion pump laser and Ti:sapphire laser pulse, we used a Brewster-cut Pockel's cell for Q-switching. The laser was frequency doubled by a type I BBO crystal outside of the cavity.

  17. The Atlas of European Values Project: Possibilities of Mapping the Values of Europeans and Challenges for Geography

    NARCIS (Netherlands)

    M Ed Uwe Krause

    2010-01-01

    The European Values Study (EVS) is a large-scale, cross-national and longitudinal research programme on basic human values, initiated in the late 1970s. A product of this research is the Atlas of European Values (AoEV), published by the University of Tilburg in the Netherlands for the second time.

  18. The Evolution of European Security: From Confrontation to Cooperation

    Science.gov (United States)

    2013-03-01

    Vasconcelos , (Paris: The European Union Institute for Security Studies, 2009), 41. 60 Ibid. 61 European Union Home Page, “Common Security and...of ESDP,” in What Ambitions for European Defense in 2020?, 2nd ed., ed. Álvaro de Vasconcelos (Paris: The European Union Institute for Security

  19. Lasers in tattoo and pigmentation control: role of the PicoSure® laser system

    Science.gov (United States)

    Torbeck, Richard; Bankowski, Richard; Henize, Sarah; Saedi, Nazanin

    2016-01-01

    Background and objectives The use of picosecond lasers to remove tattoos has greatly improved due to the long-standing outcomes of nanosecond lasers, both clinically and histologically. The first aesthetic picosecond laser available for this use was the PicoSure® laser system (755/532 nm). Now that a vast amount of research on its use has been conducted, we performed a comprehensive review of the literature to validate the continued application of the PicoSure® laser system for tattoo removal. Study design and methods A PubMed search was conducted using the term “picosecond” combined with “laser”, “dermatology”, and “laser tattoo removal”. Results A total of 13 articles were identified, and ten of these met the inclusion criteria for this review. The majority of studies showed that picosecond lasers are an effective and safe treatment mode for the removal of tattoo pigments. Several studies also indicated potential novel applications of picosecond lasers in the removal of various tattoo pigments (eg, black, red, and yellow). Adverse effects were generally mild, such as transient hypopigmentation or blister formation, and were rarely more serious, such as scarring and/or textural change. Conclusion Advancements in laser technologies and their application in cutaneous medicine have revolutionized the field of laser surgery. Computational modeling provides evidence that the optimal pulse durations for tattoo ink removal are in the picosecond domain. It is recommended that the PicoSure® laser system continue to be used for safe and effective tattoo removal, including for red and yellow pigments. PMID:27194919

  20. European Perspectives on Privacy in the Sharing Economy

    NARCIS (Netherlands)

    Ranzini, G.; Etter, Michael; Vermeulen, I.E.

    2017-01-01

    The present report ‘Privacy in the Sharing Economy: European Perspectives’, covers the Privacy part of Ps2share: a European Horizon 2020 Research Project focusing on the sharing economy. Within this document, we present the results of a widespread European survey (N=6111), covering both users and

  1. Nano and micro structured targets to modulate the spatial profile of laser driven proton beams

    Czech Academy of Sciences Publication Activity Database

    Giuffrida, Lorenzo; Svensson, K.; Pšikal, Jan; Margarone, Daniele; Lutoslawski, P.; Scuderi, Valentina; Milluzzo, G.; Kaufman, Jan; Wiste, Tuomas; Dalui, M.; Ekerfelt, H.; Gonzalez, I.G.; Lundh, O.; Persson, A.; Picciotto, A.; Crivellari, M.; Bagolini, A.; Bellutti, P.; Magnusson, J.; Gonoskov, A.; Klimša, Ladislav; Kopeček, Jaromír; Laštovička, Tomáš; Cirrone, G.A.P.; Wahlström, C.-G.; Korn, Georg

    2017-01-01

    Roč. 12, Mar (2017), s. 1-6, č. článku C03040. ISSN 1748-0221 R&D Projects: GA MŠk EF15_008/0000162; GA MŠk LQ1606; GA ČR(CZ) GA15-02964S EU Projects: European Commission(XE) 284464 - LASER LAB-EUROPE Grant - others:ELI Beamlines(XE) CZ.02.1.01/0.0/0.0/15_008/0000162 Institutional support: RVO:68378271 Keywords : accelerator applications * beam dynamics Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 1.220, year: 2016

  2. Recent changes in equilibrium line altitudes of glaciers in the Chandra-Bhaga Catchments, the Western Himalaya

    Science.gov (United States)

    Kumari, R.; Vijay, S.; Banerjee, A.; Singh, G.

    2017-12-01

    Abstract: Climatic forcing affects a glacier through a change in the corresponding equilibrium line altitude (ELA). Many approximate methods are available in the literature for estimating ELA of glaciers that are in a steady state. Some of the rudimentary methods e.g. Toe-to-Headwall-Ratio method or mid-point elevation methods are based solely on the elevation range of the glacier cover, and ignore the variations in slope, valley width or the mass-balance profile. The mean-elevation method is more accurate in that it takes into account the glacier hypsometry. In this study, we extend this method to estimate the ELA of a glacier that is not in a steady state. We assume a linear mass-balance profile, and utilize geodetic mass balance and hypsometry of the glacier to obtain ELA. This method is generally useful to track, for example, the spatial pattern of recent ELA changes in a given region. We apply the above method to 46 debris-free glaciers in the Chandra-Bhaga catchments, the Western Himalaya, to understand the regional ELA forcing during 2000 to 2012. Shuttle Radar Topographic Mission (2000) and TanDEM-X (2012) digital elevation model (DEM) are used to get elevation data. A strong correlation (r2=0.90 and pELAs with the corresponding end-of-summer-snowline-elevation data derived from cloud-free Landsat images validates our method. Our estimate for the recent ELA of Chhota shigri Glacier from the region are consistent with published glaciological ELA values. On a regional scale, the estimated ELAs are negatively correlated (r2= 0.66 and pELA per 10 mm/year reduction in rainfall. We shall also discuss the regional patterns of the changes in transient ELA between 2000 and 2012.

  3. SCENARIOS REGARDING THE FUTURE OF THE EUROPEAN UNION

    Directory of Open Access Journals (Sweden)

    PAUL-IULIAN NEDELCU

    2013-05-01

    Full Text Available This work has as purpose to argumentatively identify the future evolution of the European construction, identifying a potential scenario which would settle the current contradiction within the European Union, namely the existence of a true “economic federation” and of only a “political quasi-confederation” , being notorious the fact that in Europe, federalism is mainly known as a specific solution of power assignment between the institutions of a central power and those of the member states (for federal states or as a potential model of transnational integration (for the European Union and even for regionalism within certain states (Spain, Italy, France. It shall be tried the decryption of the philosophical and legal base of federalism as a doctrine able to provide a solution of state’s organisation in the conditions of the European integration.

  4. Developments in the European methanol market

    International Nuclear Information System (INIS)

    Speed, J.

    1995-01-01

    In the late eighties/early nineties the World Methanol Market was basically divided into three regional markets--America, Asia Pacific and Europe. These markets were interrelated but each had its own specific characteristics and traditional suppliers. Now the situation has changed; in the mid nineties there is a Global Methanol Market with global players and effective global pricing and the European market is governed by events world-wide. Europe is however a specific market with specific characteristics which are different from those of other markets although it is also part of the Global Market. Hence before the author focuses on Europe he looks at the World Market. The paper discusses world methanol production and consumption by region, world methanol consumption by end use, world methanol supply demand balance, the west European market, western European methanol production, methanol imports to W. Europe, the Former Soviet Union supplies, W. European methanol consumption by end use, MTBE in Europe, duties on methanol imports into W. Europe, investment in Europe, the effect of the 1994/95 price spike, and key issues for the future of the industry

  5. High power, short pulses ultraviolet laser for the development of a new x-ray laser

    International Nuclear Information System (INIS)

    Meixler, L.; Nam, C.H.; Robinson, J.; Tighe, W.; Krushelnick, K.; Suckewer, S.; Goldhar, J.; Seely, J.; Feldman, U.

    1989-04-01

    A high power, short pulse ultraviolet laser system (Powerful Picosecond-Laser) has been developed at the Princeton Plasma Physics Laboratory (PPPL) as part of experiments designed to generate shorter wavelength x-ray lasers. With the addition of pulse compression and a final KrF amplifier the laser output is expected to have reached 1/3-1/2 TW (10 12 watts) levels. The laser system, particularly the final amplifier, is described along with some initial soft x-ray spectra from laser-target experiments. The front end of the PP-Laser provides an output of 20--30 GW (10 9 watts) and can be focussed to intensities of /approximately/10 16 W/cm 2 . Experiments using this output to examine the effects of a prepulse on laser-target interaction are described. 19 refs., 14 figs

  6. The laser desorption/laser ionization mass spectra of some methylated xanthines and the laser desorption of caffeine and theophylline from thin layer chromatography plates

    Science.gov (United States)

    Rogers, Kevin; Milnes, John; Gormally, John

    1993-02-01

    Laser desorption/laser ionization time-of-flight mass spectra of caffeine, theophylline, theobromine and xanthine are reported. These mass spectra are compared with published spectra obtained using electron impact ionization. Mass spectra of caffeine and theophylline obtained by IR laser desorption from thin layer chromatography plates are also described. The laser desorption of materials from thin layer chromatography plates is discussed.

  7. Dependence of laser assisted cleaning of clad surfaces on the laser fluence

    International Nuclear Information System (INIS)

    Nilaya, J.P.; Raote, P.; Sai Prasad, M.B.; Biswas, D.J.; Aniruddha Kumar

    2005-01-01

    The decontamination factor is studied as a function of laser fluence for three kinds of clad surfaces viz., plain zircaloy, autoclaved zircaloy and SS with cesium as the test contamination. It has been found that the decontamination factor exhibits a maximal behaviour with the laser fluence and its maximum value occurs at different laser fluences in the three cases. The maximal behaviour is attributed to reduced coupling of energy from the laser beam to the substrate due to the initiation of surface-assisted optical breakdown. The results obtained in the experiment carried out in helium environment qualitatively support this explanation (author)

  8. THE STEEL EUROPEAN STOCK MARKET EFFICIENCY

    Directory of Open Access Journals (Sweden)

    Viorica CHIRILA

    2015-12-01

    Full Text Available Testing the hypothesis of informational efficiency is a permanent preoccupation of researchers because the theories and the models of modern finance are based on it. This paper presents the results obtained after testing the efficiency hypothesis, in the weak form, for the European stock market of the companies that belong to the economic steel sub-sector. Following the use of both linear and non-linear tests of autocorrelation of returns we can conclude that the European stock market in the economic steel sub-sector is inefficient from an informational point of view and the investors in these stocks may obtain better results than those of the European market in general.

  9. Proceedings of the twenty fifth national laser symposium

    International Nuclear Information System (INIS)

    2016-01-01

    The topics covered in this symposium are: laser materials, devices and components, nonlinear, quantum optics and atomic optics, ultrafast lasers and applications, physics and technology of lasers, lasers in nuclear science and technology, lasers in material science, laser plasma interaction, lasers in industry and defence, lasers in spectroscopy and applications, lasers in chemistry, biology and medicine, laser based instrumentation and electronics and instrumentation for lasers. Papers relevant to INIS are indexed separately

  10. Diamond detectors for time-of-flight measurements in laser-generated plasmas

    Czech Academy of Sciences Publication Activity Database

    Torrisi, L.; Margarone, D.; Milani, E.; Verona-Rinati, G.; Prestopino, G.; Tuvè, C.; Potenza, R.; Láska, Leoš; Krása, Josef; Ullschmied, Jiří

    2009-01-01

    Roč. 164, 5-6 (2009), s. 369-375 ISSN 1042-0150. [Workshop on European Collaboration for Higher Education and Research in Nuclear Engineering and Radiological Protection /4./. Favignana, 26.05.2008-28.05.2008] R&D Projects: GA MŠk(CZ) LC528 Institutional research plan: CEZ:AV0Z10100523; CEZ:AV0Z20430508 Keywords : diamond detector * laser-generated plasma * x-ray detection Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.550, year: 2009

  11. [Physician Involvement in the Activities of the European Medicines Agency].

    Science.gov (United States)

    Silva, Ivana

    2017-11-29

    For more than two decades of activity, the European Medicines Agency has been operating as part of a network with the national medicines agencies in Europe, bringing together - in its various scienti c committees and working groups - European experts on a wide range of topics related to quality assurance, safety and ef cacy of medicines. The work carried out within the European Medicines Agency activities and the conclusions reached at European level affect millions of citizens. The European Medicines Agency considers that it is of great importance to maintain, in a sustainable and consistent manner, the active participation of general practitioners, as well as other medical specialists, in the process of medicines' evaluation and supervision. This article summarizes how the participation of doctors and health professionals in general is promoted in the European Medicines Agency activities.

  12. High-speed manufacturing of highly regular femtosecond laser-induced periodic surface structures: physical origin of regularity

    Czech Academy of Sciences Publication Activity Database

    Gnilitskyi, I.; Derrien, Thibault; Levy, Yoann; Bulgakova, Nadezhda M.; Mocek, Tomáš; Orazi, L.

    2017-01-01

    Roč. 7, Aug (2017), s. 1-11, č. článku 8485. ISSN 2045-2322 R&D Projects: GA MŠk LO1602; GA MŠk LM2015086; GA MŠk EF15_003/0000445 EU Projects: European Commission(XE) 657424 - QuantumLaP Grant - others:OP VVV - BIATRI(XE) CZ.02.1.01/0.0/0.0/15_003/0000445 Institutional support: RVO:68378271 Keywords : nanostructured surfaces * single-pulse * thin-films * large-area * ripples * silicon * metal * Al * lithography * titanium Subject RIV: BH - Optics, Masers, Laser s OBOR OECD: Optics (including laser optics and quantum optics) Impact factor: 4.259, year: 2016

  13. The newsletter 'European Research in Radiological Sciences'

    International Nuclear Information System (INIS)

    Pihet, P.; D'Errico, F.; Doerr, W.; Gruenberger, M.; Schofield, P.

    2004-01-01

    The newsletter 'European Research in Radiological Sciences' is jointly published by the European Late Effects Project Group and the European Radiation Dosimetry Group to disseminate information about research projects and activities carried out under the EURATOM Framework Programme. Since May 2003, the Newsletter is operated interactively from the Internet. The new site uses a dedicated database that automatically generates HTML pages. This system developed at the Univ. of Cambridge provides an innovative approach to improve the dissemination of project information. (authors)

  14. European Utility Requirements: leveling the European electricity producers' playing ground for new NPPs

    International Nuclear Information System (INIS)

    Bernard Roche

    2006-01-01

    Full text of publication follows: Since 1992, the European Utility Requirement (EUR) document has been developed by the major European electricity producers. The main driver to this work has been the construction of a unified European market. The electricity producers have set out design requirements adapted to this new European environment, while keeping in mind experience feedback from operating NPPs worldwide. The EUR document is now fully operational and its set of generic requirements have been recently used as bid specification in Finland and in China. The EUR document keeps developing in two directions: 1- completing the assessment of the projects that could be proposed by the vendors for the European market. Five projects have been assessed between 1999 and 2002: BWR90, EPR, EP1000, ABWR and SWR1000. Two new projects are being assessed, the Westinghouse AP1000 and the Russian VVER AES92. It is currently planned to publish these two new assessments in the first half of 2006. Others may be undertaken meanwhile. 2- revision of the generic requirements. A revision C of the volume 4 dedicated to power generation plant is being completed. It includes responses to vendors comments and feedback from the TVO call for bid for Finland 5. A revision D of the volumes 1 and 2 dedicated to nuclear islands is foreseen. The main contributions to this revision are the harmonization actions going on in Europe about nuclear safety (WENRA study on reactor safety harmonization, EC works, evolution of the IAEA guides and requirements), the harmonization works on the conditions of connection to the European HV grid as well as harmonization works on other matters, like codes and standards. This has given a unified frame in which the future nuclear plants can be designed and built. In this frame development of standards designs usable throughout Europe without major design change is possible, thus helping to increase competition, and ultimately to save investment and operating costs

  15. Bovine cysticercosis in the European Union

    DEFF Research Database (Denmark)

    Blagojevic, Bojan; Robertson, Lucy J.; Vieira-Pinto, Madalena

    2017-01-01

    -only inspection of slaughtered cattle in order to reduce the potential for cross-contamination with bacteria that are of greatest public health risk, is expected in the European Union in the near future. With this system, the detection sensitivity for bovine cysticercosis that is already low with the current meat...... of bovine cysticercosis in the European Union....

  16. Robust remote-pumping sodium laser for advanced LIDAR and guide star applications

    Science.gov (United States)

    Ernstberger, Bernhard; Enderlein, Martin; Friedenauer, Axel; Schwerdt, Robin; Wei, Daoping; Karpov, Vladimir; Leisching, Patrick; Clements, Wallace R. L.; Kaenders, Wilhelm G.

    2015-10-01

    The performance of large ground-based optical telescopes is limited due to wavefront distortions induced by atmospheric turbulence. Adaptive optics systems using natural guide stars with sufficient brightness provide a practical way for correcting the wavefront errors by means of deformable mirrors. Unfortunately, the sky coverage of bright stars is poor and therefore the concept of laser guide stars was invented, creating an artificial star by exciting resonance fluorescence from the mesospheric sodium layer about 90 km above the earth's surface. Until now, mainly dye lasers or sumfrequency mixing of solid state lasers were used to generate laser guide stars. However, these kinds of lasers require a stationary laser clean room for operation and are extremely demanding in maintenance. Under a development contract with the European Southern Observatory (ESO) and W. M. Keck Observatory (WMKO), TOPTICA Photonics AG and its partner MPB Communications have finalized the development of a next-generation sodium guide star laser system which is available now as a commercial off-the-shelf product. The laser is based on a narrow-band diode laser, Raman fiber amplifier (RFA) technology and resonant second-harmonic generation (SHG), thus highly reliable and simple to operate and maintain. It emits > 22 W of narrow-linewidth (≈ 5 MHz) continuous-wave radiation at sodium resonance and includes a re-pumping scheme for boosting sodium return flux. Due to the SHG resonator acting as spatial mode filter and polarizer, the output is diffraction-limited with RMS wavefront error concept of line-replaceable units (LRU). A comprehensive system software, as well as an intuitive service GUI, allow for remote control and error tracking down to at least the LRU level. In case of a failure, any LRU can be easily replaced. With these fiber-based guide star lasers, TOPTICA for the first time offers a fully engineered, off-the-shelf guide star laser system for groundbased optical telescopes

  17. The picosecond laser for tattoo removal.

    Science.gov (United States)

    Hsu, Vincent M; Aldahan, Adam S; Mlacker, Stephanie; Shah, Vidhi V; Nouri, Keyvan

    2016-11-01

    The prevalence of tattoos continues to grow as modern society's stigma towards this form of body art shifts towards greater acceptance. Approximately one third of Americans aged 18-25 and 40 % of Americans aged 26-40 are tattooed. As tattoos continue to rise in popularity, so has the demand for an effective method of tattoo removal such as lasers. The various colors of tattoo inks render them ideal targets for specific lasers using the principle of selective photothermolysis. Traditional laser modalities employed for tattoo removal operate on pulse durations in the nanosecond domain. However, this pulse duration range is still too long to effectively break ink into small enough particles. Picosecond (10 -12 ) lasers have emerged at the forefront of laser tattoo removal due to their shorter pulse lengths, leading to quicker heating of the target chromophores, and consequently, more effective tattoo clearance. Recent studies have cited more effective treatment outcomes using picosecond lasers. Future comparative studies between picosecond lasers of various settings are necessary to determine optimal laser parameters for tattoo clearance.

  18. Problems And Prospects Of The European Regional Order

    Directory of Open Access Journals (Sweden)

    L. A. Dymova

    2017-01-01

    Full Text Available For the last few decades, the system of international relations continues to change. One of the key components of the emerging international order is the European regional order, which currently goes through deep transformations associated with changes of the international system and structural reconstruction of the European communities. The formation of the European regional system is a complex international political process, which is based on various political, social, economic, cultural, historical and other factors. Since the end of the World war II the European Union constitutes a political and institutional basis of relations both between member states and with the rest of the world. However, today the European Union runs through a systemic crisis embodied by ongoing economic and financial downturn as well as a crisis of socio-political structures and models of governance that now threaten the existence of the Union itself. Institutional problems are aggravated against the background of crises in highly sensitive areas such as economy and security, as well as uncertainties in the external international environment. All these factors undermine the ability of the EU to play a decisive role in building a European regional order. The emphasis is shifting towards particular countries, with the greater potential in shaping the international agenda and giving an effective response to modern challenges and threats. Building a stable architecture of the European security system is one of the essential conditions of the European regional order, however contradicting approaches of the parties acknowledge that political and ideological barriers between the East and the West continue to exist. In the context of increasing security threats transatlantic partnership does not lose the relevance though the tough course of the US and its desire to reinforce its leadership in Europe often meets the extreme disapproval on the part of the Europeans. Russian

  19. Protection promotion and cooperation in the European semiconductor industry

    DEFF Research Database (Denmark)

    Martin, Stephen

    1996-01-01

    in the European market. Using strategies that involve world-wide cooperation, European firms are beginning to carve out secure places for themselves in what is now a world market. Joint ventures have been critical in bringing European firms up to world performance levels, but extra-European as well as intra...

  20. Laser power sources and laser technology for accelerators

    International Nuclear Information System (INIS)

    Lowenthal, D.

    1986-01-01

    The requirements on laser power sources for advanced accelerator concepts are formidable. These requirements are driven by the need to deliver 5 TeV particles at luminosities of 10/sup 33/ - 10/sup 34/ cm/sup -2/ sec/sup -1/. Given that optical power can be transferred efficiently to the particles these accelerator parameters translate into single pulse laser output energies of several kilojoules and rep rates of 1-10 kHz. The average laser output power is then 10-20 MW. Larger average powers will be needed if efficient transfer proves not to be possible. A laser plant of this magnitude underscores the importance of high wall plug efficiency and reasonable cost in $/Watt. The interface between the laser output pulse format and the accelerator structure is another area that drives the laser requirements. Laser accelerators break up into two general architectures depending on the strength of the laser coupling. For strong coupling mechanisms, the architecture requires many ''small'' lasers powering the accelerator in a staged arrangement. For the weak coupling mechanisms, the architecture must feature a single large laser system whose power must be transported along the entire accelerator length. Both of these arrangements have demanding optical constraints in terms of phase matching sequential stages, beam combining arrays of laser outputs and optimizing coupling of laser power in a single accelerating stage

  1. Legal Developments and Problems of the Bologna Process within the European Higher Education Area and European Integration

    Science.gov (United States)

    Cippitani, Roberto; Gatt, Suzanne

    2009-01-01

    2010 sees the end of the process of establishing the European Higher Education Area (EHEA). Although not all countries may have achieved all the objectives, many are those countries and universities who have implemented many of the targets set. Within the Bologna Process, there have been many developments such as: European Credit Transfer and…

  2. Trans-European transport networks and urban systems in European Union

    OpenAIRE

    Maksin-Mićić Marija

    2003-01-01

    The trans-European transport network has different effects at interregional macro-regional and mezzo-regional level, and its effectiveness rises at the lower regional levels. Possible approaches to the trans-European transport network impact and effect survey and policy options have been pointed out. In that respect the brief review of survies, strategic framework and policies in European Union has been given. The importance of increased accessibility and mobility for regional expansion and f...

  3. Portable double-sided pulsed laser heating system for time-resolved geoscience and materials science applications.

    Science.gov (United States)

    Aprilis, G; Strohm, C; Kupenko, I; Linhardt, S; Laskin, A; Vasiukov, D M; Cerantola, V; Koemets, E G; McCammon, C; Kurnosov, A; Chumakov, A I; Rüffer, R; Dubrovinskaia, N; Dubrovinsky, L

    2017-08-01

    A portable double-sided pulsed laser heating system for diamond anvil cells has been developed that is able to stably produce laser pulses as short as a few microseconds with repetition frequencies up to 100 kHz. In situ temperature determination is possible by collecting and fitting the thermal radiation spectrum for a specific wavelength range (particularly, between 650 nm and 850 nm) to the Planck radiation function. Surface temperature information can also be time-resolved by using a gated detector that is synchronized with the laser pulse modulation and space-resolved with the implementation of a multi-point thermal radiation collection technique. The system can be easily coupled with equipment at synchrotron facilities, particularly for nuclear resonance spectroscopy experiments. Examples of applications include investigations of high-pressure high-temperature behavior of iron oxides, both in house and at the European Synchrotron Radiation Facility using the synchrotron Mössbauer source and nuclear inelastic scattering.

  4. Information report by the Commission for European Affairs about energy transition in the European Union. Nr 596

    International Nuclear Information System (INIS)

    Michels, Thierry

    2018-01-01

    In order to deal with the issue of energy transition, the European Commission has implemented a complete reworking of the European climate and energy framework, by updating certain existing legislative texts and by putting forward several new ones. In this context, this report first gives an overview of the issue of climate change, and outlines that the struggle against it is a necessity and an obligation, and even a moral one after the US withdrawal from the Paris agreement. In the second part, the author discusses the perfectible efficiency of European regulations related to energy and climate issues, and outlines remaining obstacles and weaknesses for the implementation of an efficient policy. In the third part, he defines a set of axes of action aimed at improving European objectives and make them in compliance with the Paris agreement: to define a floor price for carbon, to strengthen solidarity between member States, to introduce a framework which would suit innovation development and would make citizen empowerment possible, to ensure a financing which would match challenges, and to systematically integrate renewable energies into negotiations

  5. The European carbon tax: an assessment of the European Commission's proposals

    International Nuclear Information System (INIS)

    Pearson, M.; Smith, Stephen.

    1991-12-01

    After a lengthy internal debate within the European Commission, the Environment Commissioner announced the broad structure of the Commission's proposals for a European carbon tax towards the end of September. The proposed tax would be a combination of a tax on the carbon content of fossil fuels, and a tax on all non-renewable forms of energy. Thus, fossil fuels such as gas, coal and oil would bear a tax comprising two components, one related to their carbon content, the other related to their energy content. Non-renewable forms of energy other than fossil fuels (mainly nuclear power) would be subject to the energy-related part of the tax, but would not bear the carbon component. Overall, the two components would be combined in equal proportions, in the sense that half of the tax on a typical barrel of oil would be related to the carbon component and half to the energy component. (author)

  6. Laser pumped lasers for isotope separation

    International Nuclear Information System (INIS)

    Fry, S.M.

    1976-01-01

    A study of the isotope separation laser requirements reveals that high pressure polyatomic molecular gas laser pumped lasers can attain the necessary characteristics including tunability, energy output, pulse width, and repetition rate. The results of a search, made for molecules meeting the appropriate requirements for one of several pump schemes utilizing a CO 2 laser and with output in the 12 μm or 16μm wavelength range, are presented. Several methods of pumping are reviewed and two novel pump schemes are presented. A laser pumped laser device design is given, and operation of this device and associated diagnostic equipment is confirmed by repeating experiments in OCS and NH 3 . The results of OCS laser experiments show that an improvement in pump rate and output per unit length is obtained with the device, using a wedged transverse pumping scheme. A new multi-line laser system in NH 3 pumped by a TEA CO 2 laser is reported. More than forty transitions spanning the wavelength range of 9.2 to 13.8 μm are observed and identified. A strong output at 12.08 μm is one of the closest lines yet found to the required laser isotope separation wavelength. Far infrared emission near 65 μm is observed and is responsible for populating levels which lase in pure ammonia near 12.3 μm. Buffer gas (e.g., N 2 or He) pressures of approximately 40--800 torr cause energy transfer by collision-induced rotationaltransitions from the pumped antisymmetric to the lasing symmetric levels in the nu 2 = 1 band of ammonia. Most of the observed lines are aP(J,K) transitions which originate from the nu 2 /sup s/ band. Measurements of the pressure dependence of the laser output shows that some lines lase at pressures greater than one atmosphere. Transient behavior of the 12.08 μm line is calculated from a simplified analytic model and these calculations are compared to the experimental results

  7. A new paradigm for the European energy policy?

    International Nuclear Information System (INIS)

    Veyrenc, Thomas

    2010-01-01

    As the European Union adopted in 2009 an organisational framework for the energy sector (the third energy package), the author analyses and discusses the progressive evolutions of the European energy policy during the last decades. He first addresses the process of liberalization of electricity and natural gas markets (or network industries) which has been launched by the European Commission from the middle of the 1990's and has been almost achieved. He comments the break created by the emergence of the climate challenge during the 2000's which had an impact on the objectives of the European energy policy, on the environmental policy and on competitiveness. The author then addresses the emergence of concerns related to the security of energy supplies (a coherence challenge for the European policy): definition of the concept of supply security, dilemma of security of supply, discussion of the content of the Lisbon Treaty as a remedy to coherence challenge). The author then discusses these evolutions in terms of new content and continuity, questions the emergence of a European federalism and the lack of great projects

  8. Future prospects of laser diodes and fiber lasers

    International Nuclear Information System (INIS)

    Ueda, Ken-ichi

    2000-01-01

    For the next century we should develop new concepts for coherent control of light generation and propagation. Owing to the recent development of ultra fine structures in semiconductor lasers, fiber lasers, and various kinds of waveguide structure, we can make optical devices which control the light propagation artificially. But, the phase locking and phase control of multiple laser oscillators are one of the most important directions of laser science and technology. The coherent summation has been a dream of laser since 1960. Is it possible to solve this old and quite challenging problem for laser science? This is also a very basic concept because the laser action based on the stimulated emission is the process of coherent summation of huge number of photons emitted from individual atoms. In this paper, I discuss the fundamental direction of laser research in the next ten or twenty years. The active optics and laser technology should be combined intrinsically in near future. (author)

  9. Laser chemical analysis: the recent developments

    International Nuclear Information System (INIS)

    Mauchien, P.

    1997-01-01

    This paper gives a general overview and describes the principles of the main laser-based techniques for physical and chemical analysis, and of their recent developments. Analytical techniques using laser radiations were actually developed at the end of the 1970's. The recent evolutions concern the 3 principal techniques of laser spectroscopy currently used: Raman, fluorescence (atomic and molecular) and ablation (ICP laser ablation-plasma coupling, optical emission spectroscopy on laser-induced plasma). The description of these different techniques is illustrated with some examples of applications. (J.S.)

  10. The Control of the Implementation and Management of European Funds

    Directory of Open Access Journals (Sweden)

    Vasile Burja

    2018-03-01

    Full Text Available Effective implementation and management of European funds is of major importance for the new members of the European Union. Controlling these funds aims to increase the performance of their use. European regulations require Member States to take appropriate measures to properly maintain and operate their management and control systems so that they can offer the necessary assurances regarding the correct use of the allocated funds. This article highlights the importance of control exercised within institutions that implement and manage European funds. There have been many irregularities in the implementation of projects funded by European funds. In order to determine the most frequent types of irregularities, a questionnaire was applied to the experts responsible for controlling European funds in intermediary bodies. In this article we will present the results obtained after the centralization of expert responses and the importance of control in the prevention of irregularities and fraud.

  11. THE EUROPEAN COMPANY (SOCIETAS EUROPAEA ON RIND SIGHT

    Directory of Open Access Journals (Sweden)

    Liviana Andreea Niminet

    2016-07-01

    Full Text Available The article deals with the rind aspects of European Company (also known by its Latin name Societas Europaea or SE, a “type of public limited-liability company regulated under European Union law”. Although this form of company was proposed more than 40 years ago, it was only in 2001 when the Council issued Regulation (EC No 2157/2001 of 8 October 2001 on the Statute for a European company defining the European company (SE as “a legal structure that permits a company to operate in different European Union (EU countries under a single statute”, as determined by the law of the Union and common to all EU countries. Being a new legal form, the SE coexists with the corporate forms that already were in each Member Statebeing governed by both European Regulation and national law. As it follows we address the rules, classification, conditions for settling an SE, organization structures, tax harmonization, employee involvement in the SE, advantages and disadvantages of SEs, as well as the opportunity of SPEs.

  12. THIRD-COUNTRY MIGRATION TO THE EU: BETWEEN NORMATIVE EUROPEAN FRAMEWORKS AND NON-EUROPEAN IMMIGRANTS' PERSONAL EFFORTS

    Directory of Open Access Journals (Sweden)

    Demir ABDULLAH

    2018-05-01

    Full Text Available European leaders' rhetoric on third-country migration ranges from a discourse extolling the benefits of a United Europe, to one upholding Europe’s repute as a bastion of fundamental human rights, to yet another one out of which the continent emerges as a repressive fortress. Third-country migration not only engages the EU's efforts, but also those exerted by non-EU immigrantstowardsintegrating and becoming more open to their European host culture. This paper will be focusing both on the EU's commitment to honing its third-country migration policies, as well as on the non-EU immigrants' potential and limitations when it comes to their assimilation/integration into EU countries, in particular, Romania. Methodologically this paper uses the content analysis of European leaders’ discourses and also the qualitative analysis of data collected from 40 interviews carried out with non-EU immigrants into Romania. Another methodological tool will consist in an analysis of official EU documents. What will be pursued is the way in which the EU official documents reflect the shared interest proved by European leaders concerning the immigration processes. It will touch upon how the integration processes reclaims on the one hand permanent exchanges between the host European society and non European immigrant and on the other hand sustained efforts from these two parts in order to meet their needs and recognise their limits, in terms of economic, professional and social resources.

  13. YCOB lasers

    International Nuclear Information System (INIS)

    Richardson, Martin; Hammons, Dennis; Eichenholz, Jason; Chai, Bruce; Ye, Qing; Jang, Won; Shah, Lawrence

    1999-01-01

    We review new developments with a new laser host material, YCa 4 O(BO 3 ) 3 or YCOB. Lasers based on this host material will open new opportunities for the development of compact, high-power, frequency-agile visible and near IR laser sources, as well as sources for ultrashort pulses. Efficient diode-pumped laser action with both Nd-doped and Yb-doped YCOB has already been demonstrated. Moreover, since these materials are biaxial, and have high nonlinear optical coefficients, they have become the first laser materials available as efficient self-frequency-doubled lasers, capable of providing tunable laser emission in several regions of the visible spectrum. Self-frequency doubling eliminates the need for inclusion of a nonlinear optical element within or external to the laser resonator. These laser materials possess excellent thermal and optical properties, have high laser-damage thresholds, and can be grown to large sizes. In addition they are non-hygroscopic. They therefore possess all the characteristics necessary for laser materials required in rugged, compact systems. Here we summarize the rapid progress made in the development of this new class of lasers, and review their potential for a number of applications. (author)

  14. Laser beam cutting method. Laser ko ni yoru kaitai koho

    Energy Technology Data Exchange (ETDEWEB)

    Kutsumizu, A. (Obayashi Corp., Osaka (Japan))

    1991-07-01

    In this special issue paper concerning the demolition of concrete structures, was introduced a demolition of concrete structures using laser, of which practical application is expected due to the remarkable progress of generating power and efficiency of laser radiator. The characteristics of laser beam which can give a temperature of one million centigrade at the irradiated spot, the laser radiator consisting of laser medium, laser resonator and pumping apparatus, and the laser kinds for working, such as CO{sub 2} laser, YAG laser and CO laser, were described. The basic constitution of laser cutting equipment consisting of large generating power radiator, beam transmitter, beam condenser, and nozzle for working was also illustrated. Furthermore, strong and weak points in the laser cutting for concrete and reinforcement were enumerated. Applications of laser to cutting of reinforced and unreinforced concrete constructions were shown, and the concept and safety measure for application of laser to practical demolition was discussed. 5 refs., 8 figs.

  15. The European radon mapping project

    International Nuclear Information System (INIS)

    Bossew, P.; Tollefsen, T.; Gruber, V.; De Cort, M.

    2013-01-01

    There is almost unanimous agreement that indoor radon (Rn) represents a hazard to human health. Large-scale epidemiological studies gave evidence that Rn is the second-most important cause o flung cancer after smoking and that also relatively low Rn concentrations can be detrimental. This has increasingly led to attempts to limit Rn exposure through regulation, mainly building codes. The proposed Euratom Basic Safety Standards (BSS) require Member States to establish Rn action plans aimed at reducing Rn risk, and to set reference values for Imitating indoor Rn concentration. In 2006 the JRC started a project on mapping Rn at the European level, in addition and complementary lo (but not as a substitute for) national efforts. These maps are part of the European Atlas of Natural Radiation project. which is planned eventually 10 comprise geographical assessments of ali sources of exposure to natural radiation. Started first, a map of indoor Rn is now in an advanced phase, but still incomplete as national Rn surveys are ongoing in a number of European countries. A European map of geogenic Rn, conceptually and technically more complicated, was started in 2008. The main difficulty encountered is heterogeneity of survey designs, measurement and evaluation methods and database semantics and structures. An important part or the work on the Atlas is therefore to harmonize data and methods. We present the current state of the Rn maps and discuss some of the methodological challenges. (author)

  16. The European radon mapping project

    Energy Technology Data Exchange (ETDEWEB)

    Bossew, P., E-mail: pbossew@bfs.de [German Federal Office for Radiation Protection, Berlin (Germany); Tollefsen, T.; Gruber, V.; De Cort, M., E-mail: tore.tollefsen@jrc.ec.europa.eu, E-mail: valeria.gruber@gmail.com, E-mail: marc.de-cort@jrc.ec.europa.eu [Institute for Transuranium Elements, Ispra, VA (Italy). DG Joint Research Centre. European Commission

    2013-07-01

    There is almost unanimous agreement that indoor radon (Rn) represents a hazard to human health. Large-scale epidemiological studies gave evidence that Rn is the second-most important cause o flung cancer after smoking and that also relatively low Rn concentrations can be detrimental. This has increasingly led to attempts to limit Rn exposure through regulation, mainly building codes. The proposed Euratom Basic Safety Standards (BSS) require Member States to establish Rn action plans aimed at reducing Rn risk, and to set reference values for Imitating indoor Rn concentration. In 2006 the JRC started a project on mapping Rn at the European level, in addition and complementary lo (but not as a substitute for) national efforts. These maps are part of the European Atlas of Natural Radiation project. which is planned eventually 10 comprise geographical assessments of ali sources of exposure to natural radiation. Started first, a map of indoor Rn is now in an advanced phase, but still incomplete as national Rn surveys are ongoing in a number of European countries. A European map of geogenic Rn, conceptually and technically more complicated, was started in 2008. The main difficulty encountered is heterogeneity of survey designs, measurement and evaluation methods and database semantics and structures. An important part or the work on the Atlas is therefore to harmonize data and methods. We present the current state of the Rn maps and discuss some of the methodological challenges. (author)

  17. The European electricity market

    International Nuclear Information System (INIS)

    1988-01-01

    The creation of a single European market also will have its effects on the power and electricity sector. Expectations tied to this abandonment of borders on the electricity market are different: some hope for a reduction of energy costs, others fear safeguarded supplies to be at risk. It cannot be fully judged at present what the situation will be on a strongly integrated, European power and electricity market, and the brochure in hand is intended to present a first survey of the situation from the perspective of the power industry and energy policy, concentrating on main aspects. The survey is compiled in the form of reprints of journal articles written on this topic by a number of well-known German experts in the field. (orig./HP) [de

  18. The principle of empowerment in the European Union

    Directory of Open Access Journals (Sweden)

    Ioana Nelly MILITARU

    2011-12-01

    Full Text Available Delimitation of competences in the EU is governed by the principle of conferral. Based on the content of these provisions work in the first three parts of it, defining and classifying skills appropriate attribution Treaties underlying the European Union (Treaty on European Union and the Treaty on the Functioning of the European Union and the Court of Justice. The next three parts of the paper detailing each classification in hand, highlighting, clear delineation of the Union competences of the Member States carried out by the Lisbon Treaty and the amendments made by this treaty.

  19. Contribution to the european discussion on the energy strategy

    International Nuclear Information System (INIS)

    Revol, H.; Valade, J.

    2001-01-01

    If no change occurs, the European Union will cover in 2020, 70% of its energy need by importation, for 50% today. This situation leads to a discussion on the energy dependence. In this context the European Commission provoked a discussion by publishing a ''green book'' on the european strategy concerning the energy supply. This document presents the point of view of the Senate Energy Study Group. (A.L.B.)

  20. Lasers in the Conservation of Artworks

    CERN Document Server

    Nimmrichter, Johann; Schreiner, Manfred; LACONA VI Proceedings

    2007-01-01

    Within the last decades, the use of lasers in artworks conservation became an important tool for many conservators, scientists, architects and other experts, who are involved in the care of monuments and artefacts or laser technology. For the first time in 1995 Professor Costas Fotakis brought together restorers and scientists to discuss the potential of lasers in art conservation. Since then the field of "Lasers in the Conservation of Artworks" has gained enormously in importance. Nowadays restorers and laser scientists work close together in order to develop new fields of applications during the last years. Furthermore a large number of national and international research projects have been carried out by conservator-restorers, architects and scientists. In the last 10 years a number of historical and artistic high quality monuments (e.g. St. Stephens Cathedral in Vienna) have been cleaned or measured by laser and brought the laser in the spectra of tools which are useful in the sensible field of artworks. ...

  1. Programming of the Wavelength Stabilization for a Titanium:Sapphire Laser using LabVIEW and Implementation into the CERN ISOLDE RILIS Measurement System

    CERN Document Server

    Rossel, Ralf Erik; Wendt, K; Rothe, S

    In the context of this work the foundation for the commissioning of a comprehensive environmental and operational data acquisition system was established. This development was performed for the Resonance Ionization Laser Ion Source (RILIS) at the ISOLDE radioactive ion beam facility within the European Organization for Nuclear Research CERN. As an essential step towards long-term automated operation, a remote control and wavelength stabilization system for the RILIS titanium:sapphire lasers was put into operation. This required the installation of a data recording infrastructure to work with a distributed sensor network. After operational data within the CERN technical computing network was collected and analyzed, the required wavelength adjustment was automatically performed by a stepper motor-driven correction system. The configuration of the hardware for acquisition and control and the integration of the dedicated system modules was performed using the graphical and data flow oriented programming language ...

  2. Parameters in fractional laser assisted delivery of topical anesthetics: Role of laser type and laser settings.

    Science.gov (United States)

    Meesters, Arne A; Nieboer, Marilin J; Kezic, Sanja; de Rie, Menno A; Wolkerstorfer, Albert

    2018-05-07

    Efficacy of topical anesthetics can be enhanced by pretreatment of the skin with ablative fractional lasers. However, little is known about the role of parameters such as laser modality and laser density settings in this technique. Aims of this study were to compare the efficacy of pretreatment with two different ablative fractional laser modalities, a CO 2 laser and an Er:YAG laser, and to assess the role of laser density in ablative fractional laser assisted topical anesthesia. In each of 15 healthy subjects, four 10 × 10 mm test regions on the back were randomized to pretreatment (70-75 μm ablation depth) with CO 2 laser at 5% density, CO 2 laser at 15% density, Er:YAG laser at 5% density or Er:YAG laser at 15% density. Articaine hydrochloride 40 mg/ml + epinephrine 10 μg/ml solution was applied under occlusion to all four test regions. After 15 minutes, a pass with the CO 2 laser (1,500 μm ablation depth) was administered as pain stimulus to each test region. A reference pain stimulus was given on unanesthetized skin. The main outcome parameter, pain, was scored on a 0-10 visual analogue scale (VAS) after each pain stimulus. Median VAS scores were 1.50 [CO 2 5%], 0.50 [CO 2 15%], 1.50 [Er:YAG 5%], 0.43 [Er:YAG 15%], and 4.50 [unanesthetized reference]. VAS scores for all pretreated test regions were significantly lower compared to the untreated reference region (P laser pretreated regions. However, VAS scores were significantly lower at 15% density compared to 5% density for both for the CO 2 laser (P laser (P laser was considered slightly more painful than pretreatment with Er:YAG laser by the subjects. Fractional laser assisted topical anesthesia is effective even with very low energy settings and an occlusion time of only 15 minutes. Both the CO 2 laser and the Er:YAG laser can be used to assist topical anesthesia although the CO 2 laser pretreatment is experienced as more painful. In our study settings, using articaine

  3. The European Nuclear Education Network Association - ENEN

    International Nuclear Information System (INIS)

    De Regge, P.P.

    2005-01-01

    The temporary network, established through the European 5 th Framework Programme project ENEN, was given a more permanent character by the foundation of the European Nuclear Education Network Association, a non-profit-making association according to the French law of 1901, pursuing a pedagogic and scientific aim. Its main objective is the preservation and the further development of higher nuclear education and expertise. This objective is realized through the co-operation between the European universities, involved in education and research in the nuclear engineering field, the nuclear research centres and the nuclear industry. The membership of the ENEN Association now consists of 35 universities members and 6 research centres. The paper briefly describes the history and structure of the ENEN Association and elaborates on the objectives and activities of its five committees during its first two years of operation. Supported by the 5 th and 6 th Framework Programme of the European Community, the ENEN Association established the delivery of the European Master of Science in Nuclear Engineering certificate. In particular, education and training courses have been developed and offered to materialise the core curricula and optional fields of study in a European exchange structure. Pilot editions of those courses and try-outs of training programmes have been successfully organised with a satisfying interest, attendance and performance by the students and the support of nuclear industries and international organisations. The involvement of ENEN in the 6 th EC Framework project EUROTRANS will further enlarge its field of activities into a realm of nuclear disciplines. The ENEN Association further contributes to the management of nuclear knowledge within the European Union as well as on a world-wide level, through contacts with its sister Network ANENT in Asia, and by its participation to activities of the World Nuclear University. (author)

  4. The European Nuclear Education Network Association - ENEN

    International Nuclear Information System (INIS)

    Gentile, D.

    2006-01-01

    The temporary network, established through the European 5. Framework Programme project ENEN, was given a more permanent character by the foundation of the European Nuclear Education Network Association, a non-profit-making association according to the French law of 1901, pursuing a pedagogic and scientific aim. Its main objective is the preservation and the further development of higher nuclear education and expertise. This objective is realized through the co-operation between the European universities, involved in education and research in the nuclear engineering field, the nuclear research centres and the nuclear industry. The membership of the ENEN Association now consists of 35 universities members and 6 research centres. The paper briefly describes the history and structure of the ENEN Association and elaborates on the objectives and activities of its five committees during its first two years of operation. Supported by the 5. and 6. Framework Programme of the European Community, the ENEN Association established the delivery of the European Master of Science in Nuclear Engineering certificate. In particular, education and training courses have been developed and offered to materialize the core curricula and optional fields of study in a European exchange structure. Pilot editions of those courses and try-outs of training programmes have been successfully organised with a satisfying interest, attendance and performance by the students and the support of nuclear industries and international organisations. The involvement of ENEN in the 6. EC Framework project EUROTRANS will further enlarge its field of activities into a realm of nuclear disciplines. The ENEN Association further contributes to the management of nuclear knowledge within the European Union as well as on a world-wide level, through contacts with its sister Network ANENT in Asia, and by its participation to activities of the World Nuclear University. (author)

  5. The European Nuclear Education Network Association - ENEN

    Energy Technology Data Exchange (ETDEWEB)

    Gentile, D. [Institut des Sciences et Techniques Nucleaires, CEA - Centre de Saclay, Bat. 395, F-91191 Gif-sur-Yvette (France)

    2006-07-01

    The temporary network, established through the European 5. Framework Programme project ENEN, was given a more permanent character by the foundation of the European Nuclear Education Network Association, a non-profit-making association according to the French law of 1901, pursuing a pedagogic and scientific aim. Its main objective is the preservation and the further development of higher nuclear education and expertise. This objective is realized through the co-operation between the European universities, involved in education and research in the nuclear engineering field, the nuclear research centres and the nuclear industry. The membership of the ENEN Association now consists of 35 universities members and 6 research centres. The paper briefly describes the history and structure of the ENEN Association and elaborates on the objectives and activities of its five committees during its first two years of operation. Supported by the 5. and 6. Framework Programme of the European Community, the ENEN Association established the delivery of the European Master of Science in Nuclear Engineering certificate. In particular, education and training courses have been developed and offered to materialize the core curricula and optional fields of study in a European exchange structure. Pilot editions of those courses and try-outs of training programmes have been successfully organised with a satisfying interest, attendance and performance by the students and the support of nuclear industries and international organisations. The involvement of ENEN in the 6. EC Framework project EUROTRANS will further enlarge its field of activities into a realm of nuclear disciplines. The ENEN Association further contributes to the management of nuclear knowledge within the European Union as well as on a world-wide level, through contacts with its sister Network ANENT in Asia, and by its participation to activities of the World Nuclear University. (author)

  6. The common European flexicurity principles

    DEFF Research Database (Denmark)

    Mailand, Mikkel

    2010-01-01

    This article analyses the decision-making process underlying the adoption of common EU flexicurity principles. Supporters of the initiative succeeded in convincing the sceptics one by one; the change of government in France and the last-minute support of the European social partner organizations...... were instrumental in this regard. However, the critics succeeded in weakening the initially strong focus on the transition from job security to employment security and the divisions between insiders and outsiders in the labour market. In contrast to some decision-making on the European Employment...

  7. European Law in the Making:

    DEFF Research Database (Denmark)

    Rasmussen, Morten

    Traditionally, the Court of Justice of the European Coal and Steel Community (ECSC) has mainly been considered the somewhat dull predecessor to the more famous Court of Justice of the European Communities, which in 1963-64 ‘constitutionalised’ the Treaties of Rome with the seminal judgments of Van...... Gend en Loos and Costa V. ENEL. The jurisprudence of the Court of Justice of the ECSC was allegedly conservative dominated by technical and economic considerations less than adventurous activism. Recent historical research has demonstrated the complexity of the legal landscape of the 1950s, in which...

  8. The European gas market at the 2008 prospects

    International Nuclear Information System (INIS)

    2004-11-01

    Because of the opening of European energy markets to competition and to the dynamism of gas consumption, the natural gas market has become very attractive. In parallel, the development of infrastructures (in particular for the LNG industry) offer setting up possibilities to newcomers. Moreover, the synergies linked to the gas/electricity convergence diminish the boundary between electricity and gas markets. In this context, the historical operators of European gas markets have to face the offensive of oil and electric power companies. This study tackles the following questions: what are the gas demand evolution prospects? What are the most attractive consumption areas? How gas prices will change in mid-term? What is the competitive intensity of national markets? Which commercial positioning is to be adopted? What future for dual offers? What is the advantage of regulated activities for operators? Who are the best positioned actors? What will be the mid-term role of Gazprom? What are the mid-term prospects of European market reconfiguration? This study analyses the strategy and positioning of the main European gas operators and shows their forces and weaknesses. It includes a financial comparison of the 20 main groups present in the European natural gas market. This analysis allows to propose 4 scenarios of mid-term evolution for this market. (J.S.)

  9. Humanities in the European Union

    DEFF Research Database (Denmark)

    Johansson, Lasse Gøhler; Vikman, Jutta Maria; Liljenstrøm, Andreas Jan

    2017-01-01

    In the present paper, we analyze the publication strategies of researchers in the humanities, including their choices of language, publication type and co-authorship. Based on data from Denmark, we compare the publication profile of the humanities with the other major fields of science in 2012 an...... conjuncture of the European Union’s internationalization policies in the 1990s and 2000s and a change in the international scientific hierarchy during the 20th century has contributed to the universalization of English in the Danish (and European) scientific field....

  10. High power visible diode laser for the treatment of eye diseases by laser coagulation

    Science.gov (United States)

    Heinrich, Arne; Hagen, Clemens; Harlander, Maximilian; Nussbaumer, Bernhard

    2015-03-01

    We present a high power visible diode laser enabling a low-cost treatment of eye diseases by laser coagulation, including the two leading causes of blindness worldwide (diabetic retinopathy, age-related macular degeneration) as well as retinopathy of prematurely born children, intraocular tumors and retinal detachment. Laser coagulation requires the exposure of the eye to visible laser light and relies on the high absorption of the retina. The need for treatment is constantly increasing, due to the demographic trend, the increasing average life expectancy and medical care demand in developing countries. The World Health Organization reacts to this demand with global programs like the VISION 2020 "The right to sight" and the following Universal Eye Health within their Global Action Plan (2014-2019). One major point is to motivate companies and research institutes to make eye treatment cheaper and easily accessible. Therefore it becomes capital providing the ophthalmology market with cost competitive, simple and reliable technologies. Our laser is based on the direct second harmonic generation of the light emitted from a tapered laser diode and has already shown reliable optical performance. All components are produced in wafer scale processes and the resulting strong economy of scale results in a price competitive laser. In a broader perspective the technology behind our laser has a huge potential in non-medical applications like welding, cutting, marking and finally laser-illuminated projection.

  11. Laser Doppler velocimetry based on the optoacoustic effect in a RF-excited CO{sub 2} laser

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Teaghee; Choi, Jong Woon [Department of Information and Communication, Honam University, Seobong-dong 59-1, Gwansan-gu, Gwangju 506-714 (Korea, Republic of); Kim, Yong Pyung [College of Electronics and Information, Kyunghee University, 1 Seocheon-dong, Giheung-gu, Yongin-si, Gyeonggi-do 446-701 (Korea, Republic of)

    2012-09-15

    We present a compact optoacoustic laser Doppler velocimetry method that utilizes the self-mixing effect in a RF-excited CO{sub 2} laser. A portion of a Doppler-shifted laser beam, produced by irradiating a single wavelength laser beam on a moving object, is mixed with an originally existing laser beam inside a laser cavity. The fine change of pressure in the laser cavity modulated by the Doppler-shifted frequency is detected by a condenser microphone in the laser tube. In our studies, the frequency of the Doppler signal due to the optoacoustic effect was detected as high as 50 kHz. Our measurements also confirmed that the signal varied linearly with the velocity of the external scatterer (the moving object) and the cosine of the angle between the laser beam and the velocity vector of the object.

  12. Perspectives for food research and European collaboration in the European Research Area and the new Framework Programme.

    Science.gov (United States)

    Breslin, L

    2001-08-01

    Since 1987, successive framework programmes have contributed to strengthen European food research through the establishment of networks between research institutions, universities and companies from various European countries. In the FAIR programme (1994-1998), 118 research projects comprising nearly 1,000 participants from the European Union and Associated States have been supported in the food area with a European funding of about [symbol: see text] 108 million. Within the Quality of Life and Management of Living Resources programme (1998-2002), food research is mostly supported within the key action 'food, nutrition and health' with a budget of [symbol: see text] 290 million. After the first four deadlines, 735 eligible research proposals have already been received. Further to their evaluation by a panel of independent experts, 108 proposals have been funded or selected for funding representing a total contribution of about [symbol: see text] 168 million. Among those, several clusters of projects are now running on important topics such as probiotics, coeliac diseases, mycotoxins, GMO, safety and food for the elderly. In addition, technology stimulation measures are largely benefiting SMEs to foster their innovation potential. In January 2000, the European Commission adopted a Communication entitled "Towards the European Research Area (ERA)" with the objective to contribute to developing better framework conditions for research in Europe. On 21 February 2001, the Commission adopted proposals to be submitted to the European Parliament and Council for the next framework programme for research and innovation (2002-2006). The new framework programme that is becoming one of the financial instruments of the ERA aims at catalysing the integration of European research by: strengthening of links between the Community research effort and national and regional research policies; concentrating on a limited number of priority fields or research to which activities at the

  13. Ultrashort pulse laser technology laser sources and applications

    CERN Document Server

    Schrempel, Frank; Dausinger, Friedrich

    2016-01-01

    Ultrashort laser pulses with durations in the femtosecond range up to a few picoseconds provide a unique method for precise materials processing or medical applications. Paired with the recent developments in ultrashort pulse lasers, this technology is finding its way into various application fields. The book gives a comprehensive overview of the principles and applications of ultrashort pulse lasers, especially applied to medicine and production technology. Recent advances in laser technology are discussed in detail. This covers the development of reliable and cheap low power laser sources as well as high average power ultrashort pulse lasers for large scale manufacturing. The fundamentals of laser-matter-interaction as well as processing strategies and the required system technology are discussed for these laser sources with respect to precise materials processing. Finally, different applications within medicine, measurement technology or materials processing are highlighted.

  14. The European energy community, it is for now

    International Nuclear Information System (INIS)

    Andoura, S.; Buzek, J.; Delors, J.; Vitorino, A.

    2013-01-01

    Given that the European Council (on 22. May) mentioned the stakes involved for a common European energy policy, and that France's president has juts made another call to set up a European energy community, it is time to properly identify the main challenges that have to be met for such a project. The energy transition, that requires a deep change in our ways of producing, transporting and using energy, could be the basis of this new common policy. This new policy may follow 3 axis: first achieving the integration of a common energy market that will simulate the competitiveness of the European energy operators, secondly the security of supply implies a diversification of energy sources that could be reached through a stronger European solidarity, and thirdly a better cooperation between states for coordinating the construction of new infrastructures

  15. European Whiteness?

    DEFF Research Database (Denmark)

    Blaagaard, Bolette

    2008-01-01

    Born out of the United States’ (U.S.) history of slavery and segregation and intertwined with gender studies and feminism, the field of critical whiteness studies does not fit easily into a European setting and the particular historical context that entails. In order for a field of European...

  16. Fusion research in the European Community

    International Nuclear Information System (INIS)

    Wolf, G.H.

    1988-01-01

    Centering around the European joint project Joint European Torus (JET), in the framework of which hot fusion plasmas are already brought close to thermonuclear ignition, the individual research centres in Europe have taken over different special tasks. In Germany research concentrates above all on the development of super-conductive magnets, the stage of plasma-physical fundamentals or the investigation of the interaction between the plasma boundary layer and the material of the vessel wall. On this basis the development stage following JET, the Next European Torus (NET), is planned, with its main aim being the production and maintenance of a thermonuclear burning plasma, i.e. a plasma which maintains its active state from the gain of energy of its own fusion reactions. In the framework of a contractually agreed cooperation between the European Community, Japan, the USSR and the USA, the establishment of an international study group (with seat in Garching) was decided upon, which is to develop the concept of an 'International Thermonuclear Experimental Reactor (ITER)' jointly supported by these countries. The results of the studies presented show that the differences in the design data of ITER and NET are negligible. (orig./DG) [de

  17. Performance of a high repetition pulse rate laser system for in-gas-jet laser ionization studies with the Leuven laser ion source LISOL

    International Nuclear Information System (INIS)

    Ferrer, R.; Sonnenschein, V.T.; Bastin, B.; Franchoo, S.; Huyse, M.; Kudryavtsev, Yu.; Kron, T.; Lecesne, N.; Moore, I.D.; Osmond, B.; Pauwels, D.; Radulov, D.; Raeder, S.; Rens, L.

    2012-01-01

    The laser ionization efficiency of the Leuven gas cell-based laser ion source was investigated under on- and off-line conditions using two distinctly different laser setups: a low-repetition rate dye laser system and a high-repetition rate Ti:sapphire laser system. A systematic study of the ion signal dependence on repetition rate and laser pulse energy was performed in off-line tests using stable cobalt and copper isotopes. These studies also included in-gas-jet laser spectroscopy measurements on the hyperfine structure of 63 Cu. A final run under on-line conditions in which the radioactive isotope 59 Cu (T 1/2 = 81.5 s) was produced, showed a comparable yield of the two laser systems for in-gas-cell ionization. However, a significantly improved time overlap by using the high-repetition rate laser system for in-gas-jet ionization was demonstrated by an increase of the overall duty cycle, and at the same time, pointed to the need for a better shaped atomic jet to reach higher ionization efficiencies.

  18. The institutional dimension of the European Union’s combat transnational crime, as one of the main threats to European security

    Directory of Open Access Journals (Sweden)

    O. S. Vonsovych

    2016-06-01

    Full Text Available The article investigates the role of the leading institutions of European Union in the fight with transnational crime. It was determined that the problem of transnational crime occupies one of the central places in the field of European security. This is due to the fact that the overall level of crime in Europe in recent years has increased several times compared with the beginning of the XXI century. It was found that today transnational crime is becoming a serious obstacle on the way of building stability and sustainable development. It is nothing less than terrorism, illegal immigration affects the state of European security, creating the new center of a danger in Europe. It is proved that each institution has its own specific of struggle, but the unifying factor is that all of them are working on the same thing – the elimination of the threat in order to increase the level of security in Europe in general and in EU in particular. Substantiated the thesis that it is important to further developing of close and constructive cooperation between the main European institutions, as well as mutual exchange of information and data regarding the recent changes and the manifestations of transnational crime. This will give an opportunity to strengthen the European security system, as well as implement common practical methods of counteraction. It was determined that the actualization of the practical component in the framework of EU institutional dimension in the future will contribute to strengthening European.

  19. European Society of Gastrointestinal Endoscopy, European Society of Gastroenterology and Endoscopy Nurses and Associates, and the European Society of Anaesthesiology Guideline: Non-anaesthesiologist administration of propofol for GI endoscopy

    DEFF Research Database (Denmark)

    Dumonceau, J.M.; Riphaus, A.; Aparicio, J.R.

    2010-01-01

    ), the European Society of Gastroenterology and Endoscopy Nurses and Associates (ESGENA) and the European Society of Anaesthesiology (ESA). These three societies have endorsed the present guideline.The guideline is published simultaneously in the Journals Endoscopy and European Journal of Anaesthesiology....

  20. Energy policies of the European Union

    International Nuclear Information System (INIS)

    Lyons, P.K.

    1994-09-01

    This report takes stock of what has been achieved and where the European Community is going in terms of energy policy and also looks at the full extent of the Union's energy sector competances. The chapters deal with the European Commission's programme to create an internal energy market through implementing new Directives and by means of an approach through competition. A further two chapters concentrate on environmental policy with respect to emissions control and the greenhouse effect. Two broad policy areas - Community Initiative and trans-European networks - are examined in a consideration of the connections between energy and economic and social cohesion. Security of supply is the fourth and traditional pillar of energy policy to be considered. Three policy areas which do not fit into these first four categories are dealt with in individual chapters. These are: nuclear issues, research and development, and a wider Europe. A concluding chapter suggests that there is an urgent need for a new way of dealing with energy in the European Union which has a myriad of policies affecting energy but no energy policy. The appendices include a document summary for each of the main chapters and a glossary. (UK)