FY 1999 report on the results of the R and D project on the industrial technology for the global environment. R and D of the prediction technology of environmental effects brought by CO2 ocean sequestration (Development of prediction technology of environmental effects around the point of CO2 discharge and the research support survey); 1999 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo NEDO seika hokokusho. Nisankatanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu (CO2 horyuten shuhen'iki no kankyo eikyo yosoku gijutsu no kaihatsu narabini kenkyu shien chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of studying viability of CO2 ocean sequestration by discharging it at the intermediate depth of ocean, the R and D were conducted of 'prediction technology of environmental effects around the point of CO2 discharge,' and the FY 1999 results were summarized. In the study of elucidation of behavior of liquid CO2 at the time of discharge, melting speed of CO2 in water and seawater, 2D CO2 concentration distribution, etc. were measured using the circulation type deep-sea simulation experimental equipment. In the study of technology to send CO2 into the sea and dilute it, the process test using mock liquid was conducted. In the indoor experiment on CO2 effects on marine organisms, conducted were the detailed experiment on long-term effects of low concentration CO2 on sea urchins and shellfish, experiment on CO2 acute effects on eggs/fry and experiment on CO2 effects on adult fish. In the developmental study of the model to predict environmental effects around the point of CO2 discharge, carried out were the improvement of the model for prediction of effects on marine organisms, study of the CO2 diffusion in topographic features supposed to be Hawaii, etc. In the international joint study, measurement/observation technology, facilities, etc. were studied in preparation for the experiment actually conducted in the sea. (NEDO)

FY 2000 report on the results of the project on the R and D of the global environmental industry technology. R and D of the technology for predicting environmental effects associated with the CO2 ocean sequestration (Development of the technology for predicting environmental effects in the area around the CO2 discharge point and survey for supporting study); 2000 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Nisanka tanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu (CO2 horyuten shuhen'iki no kankyo eikyo yosoku gijutsu no kaihatsu narabini kenkyu shien chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

To obtain the technical outlook for CO2 ocean sequestration by CO2 discharge into the intermediate layer, the R and D was conducted of the technology for predicting environmental effects in the area around the CO2 discharge point, and the FY 2000 results were summed up. In the elucidation study of the behavior at the time of discharging liquid CO2, the melting process of CO2 droplets discharged/dispersed into the seawater of the intermediate layer was observed, and the specific phenomenon of hydrate formation in the process of CO2 droplet formation was grasped. As to the technology for sending CO2 into the ocean and diluting it, experimental study was made of CO2 transportation technology from on the sea to the intermediate layer, technology for rapid dilution immediately after discharge, etc. About the indoor experiment on the CO2 influence on marine organisms, experiment on the CO2 influence was carried out using shells, sea urchin, red sea bream, etc. In the developmental study of models for predicting environmental effects in the area around the CO2 discharge point, the 3D two-phase flow LES model was developed as a model for predicting the CO2 behavior, and the simulation of the liquid CO2 discharge was made at the planned experimental site. The model for evaluation of the biological influence was also made which can consider the interaction between two kinds of organisms. (NEDO)

FY 1999 achievement report on the supporting project to form energy/environmental technology verification project - International joint verification research project. Development of the mean wind velocity prediction method and the related matters in developing countries; 1999 nendo hatten tojokoku ni oikeru heikin fusoku yosoku shuho nado no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Developing countries have no sufficient basic data for the analysis of meteorological conditions including wind characteristics, and there are problems in adopting simulation models there. Accordingly, the revision/development of simulation models were conducted, considering characteristics of models to predict wind characteristics from topographical/geographical aspects and widely meteorological aspect in Myanmar. At the same time, the mean wind velocity distribution chart for Myanmar was drawn up by observing wind characteristics domestically in Myanmar, by comparing the predicted results using the above-mentioned models and the measured data, and by verifying the simulation results. The items for development are as follows: (1) To make simulation models for wind characteristics in the whole Myanmar based on the information obtained from the meteorological observation system for prediction of the mean wind velocity. Also to verify the simulational results using the measured data on wind characteristics at specified points. (2) To conduct the developmental work under a research system jointly with the counterpart and to produce favorable results as an international joint research. (3) To acquire the basic data to find the relation between the photovoltaic power generation and wind characteristics for studying hybrid type power systems for renewable energy in the future. (NEDO)

FY 1998 Report on development of large-scale wind power generation systems. Feasibility study on development of new technologies for wind power generation, and study on local wind resource prediction model; 1998 nendo ogata furyoku hatsuden system kaihatsu seika hokokusho. Furyoku hatsuden shingijutsu kaihatsu kanosei chosa (kyokusho fukyo yosoku shuho ni kansuru chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Described herein are the FY 1998 results of the study on local wind resource prediction model. The local wind resource prediction models developed so far apply the solutions based on the existing linear models (WASP and AVENU) for relatively flat terrain. These models are studied for their applicability limits. The study covers wind direction and speed patterns of the surface wind and upper winds at 3 sites in Hokkaido, Fukushima Pref. and Shizuoka Pref. The surface winds are found to be correlated with the upper winds both for wind direction and wind speed in almost all cases. Next, wind resources simulations are carried out for each of the classified weather patterns using the existing models, and the prediction errors are studied. The results show that the prediction accuracy of the existing linear models is highly dependent on inputs of observed data, and that the accuracy tends to decrease for the situations where the upper and surface wind conditions greatly differ from each other, as in the case of a land and sea breeze of thermal origin. It is also confirmed that prediction accuracy is lower on complex terrain than on flat terrain. (NEDO)

Study of test procedure to evaluate airbag deployment force; Airbag tenkairyoku no hyoka shuho no kenkyu

Energy Technology Data Exchange (ETDEWEB)

Kamiji, K.; Fukuda, K.; Morita, K. [Honda Motor Co. Ltd., Tokyo (Japan)

1998-05-01

Discussions were given on airbags equipped in passenger cars as to methods of evaluating their deployment injuries. Airbag deployment injuries occur in occupants being out of position. In a driver`s seat, an injury may occur when an air bag deploys under a condition that a driver with relatively short body height gets closer to a steering wheel to maintain the driving posture. In a front passenger seat, if a child is not held in a restraint equipment, the child may be blown off into the vicinity of the airbag, whose deployment can cause an injury. According to the result of a test performed on a driver being out of position, the test method using a hybrid 3 dummy specified in the present ISO procedure may not necessarily be said to produce an evaluation on the worst case. In order to solve the problem, an ATD dummy which can measure bend in each rib independently would be used, or the hybrid 3 dummy must be measured in the worst set position. 4 refs., 8 figs.

Predicting geometry of slip surfaces beneath landslides by fuzzy theory. Fuzzy riron wo riyoshita suberimen yosoku

Energy Technology Data Exchange (ETDEWEB)

Ono, K [Mie Univ., Mie (Japan). Faculty of Biological and Resources

1991-12-01

In case a landslide occurs on a slope, grasping the area of influence (location and shape of the slip surface) is required to take a countermeasure against landslides. This paper describes a method developed by the author for predicting a slip surface by utilizing fuzzy theory. The method predicts a slip surface from observations on ground surface displacement vectors, and the validity of the method has been verified through slip experiments conducted on slopes with a centrifugal model experiment device. The developed method for predicting the location of a slip surface well matches the experiment results, indicating the validity of the method. It has been found that the difference between the predicted and observed locations of a slip surface mainly is due to the error of the prediction in the starting and ending locations of the slip surface. It is also pointed out that, in order to improve the prediction of the shape of a slip surface, the observation density must be increased at the location where the shape of the slip surface strongly varies, since the direction of the slip surface is determined by the direction of the ground surface displacement vectors. 4 refs., 7 figs.

Prediction method for the lubricating oil temperature of manual transaxle; Manual transaxle no yuon yosoku simulation

Energy Technology Data Exchange (ETDEWEB)

Iritani, M; Kaneda, K; Ibaraki, K [Toyota Central Research and Development Labs., Inc., Aichi (Japan); Suzuki, K; Morita, Y [Toyota Motor Corp., Aichi (Japan)

1997-10-01

Heat transfer and flow characteristics in manual transaxle (MT) are not clear. The measurement of the heat flux and the heat generations and the flow visualization were conducted for quantitative analysis of the heat transfer phenomena in the MT. A simulating technique for the lubricant temperature was developed with these experimental data and the prediction accuracy was within 3degC under the various operating conditions. The simulation was verified to be useful for estimating the lubricant temperature reduction by the lubricant volume reduction, air flow improvement around MT, etc. 7 refs., 8 figs.

FY 1998 results of the intellectual basement project using functions of private companies (venture promotion type basement creation R and D project). Development of endocrine disrupter testing method and development of environmental assessment method; 1998 nendo naibunpi kakuran busshitsu ni taisuru shiken hoho kaihatsu oyobi eikyo hyoka shuho kaihatsu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of assessing the risk in relation to endocrine disrupting chemicals, the following were conducted: development of testing/assessment method for endocrine disrupting chemicals, survey of the actual exposure assessment, development of measuring method for the concentration in the environment. In the development of the testing method, the following were carried out: development of a high-throughput screening method for evaluating endocrine disrupting chemicals; as screening testing method using mammals, uterotrophic assay, Hershberger assay using castrated male rats, thyroid hormone assay in pubertal rats, enhanced OECD 407 test guideline for 28-day toxicity test; study on yeast two-hybrid assay for endocrine disrupter; sex-reversal assay for suspected endocrine disrupting chemicals using S-rR strain medaka. In the development of exposure assessment method, estrogenic potency of individual nonylphenol congeners isolated from technical mixtures; determination of endocrine disrupters and related chemicals from industry and nature origin in river water and sediment; research for the flow of industrial origin chemicals; reconstruction of pollution history of chemicals using sediment cores. (NEDO)

Study of design factors of vehicle headlamp control systems; Zenshoto seigyo system no hyoka shuho no kento

Energy Technology Data Exchange (ETDEWEB)

Kamishima, H; Miwa, T; Sasaki, T; Imai, M [Nissan Motor Co. Ltd., Tokyo (Japan); Sumi, T [Niles Parts Co. Ltd., Tokyo (Japan)

1997-10-01

The on-and-off timing of vehicle headlamp control systems varies with weather conditions. Cloudy weather has a wider light energy distribution from visible to infrared radiation than clear weather. Silicon photodiodes, which can detect visible to infrared radiation, have larger output currents on cloudy evenings than on clear evenings under the same brightness conditions. The systems should be designed with such factors in mind as spectral characteristics of windshield, filters, sensor, and eyesight. 4 refs., 9 figs.

Fire in Kuwaiti oil and its influence. Kuwait yuden kasai to sono eikyo

Energy Technology Data Exchange (ETDEWEB)

Mizoguchi, T. (The Institute of Public Health, Tokyo (Japan))

1993-01-10

Fire which was brought about by the Gulf War in Kuwaiti oil fields caused artificial air pollution of the largest scale without precedent. In March, 1991 immediately after the War had come to an end, investigation was started by various organizations of different countries. Japan conducted her investigation from April to May, 1991 on. The present report gave the full particulars of air pollution investigation result together with the result of further investigation conducted on site in Kuwait in December, 1991 after the fire had been put out. It was reported that totally 500 to 850 oil wells were burned up in seven oil fields with a crude oil burning rate of 1 to 6 million barrels per day at its peak. However at most spots in Kuwait, the air pollution during the burning was unexpectedly much less than its environmental standard value though high content was locally detected of floating particulate substances, SO2, etc. Additionally with circumstances of traffic and industrial destructions, the measured data after the fire had been put out gave lower content of SO2 and NO2 than that in the non-polluted regions in Japan. 4 refs., 2 figs., 8 tabs.

Predict optimize the friction characteristics of brake pads; Brake pad no masatsu tokusei no yosoku to saitekika

Energy Technology Data Exchange (ETDEWEB)

Saotome, H [Nissin Kogyo Co., Tokyo (Japan); Kato, T [The University of Tokyo, Tokyo (Japan)

1997-10-01

The effect of the friction and the wear properties of brake pads were experimentally studied using a test rig of scale of 1/10 of the system used in a commercial car. The experimental data were investigated by the Multiple Regression Analysis and the Neural Network, and the effects of volume % of components on the friction and the wear properties were predicted. In addition the components of brake pads are optimized by Genetic Algorithms. 8 refs., 9 figs., 4 tabs.

Prediction of blast vibration level considered propagation characteristics; Denpa tokusei to koryoshita happa shindo level no yosoku

Energy Technology Data Exchange (ETDEWEB)

Kunimatsu, S; Jinguji, M [National Institute for Resources and Environment, Tsukuba (Japan); Yamada, M; Hirai, T [Newjec Inc., Osaka (Japan); Durucan, S; Farsangi, M

1997-10-22

With an objective to assess environmental influence induced by blast vibration, a study has been carried out on a method to predict vibration levels. The study has discussed a method to calculate vibration levels, in which vibration propagating characteristics are sought on blast vibration generated from an open-cut limestone mine from acceleration waveforms in the vicinity of the blast source and residential housings by using an octave analysis, and waveforms are predicted. The shortest straight line distance from the blast position to a housing is about 150 m, and the height difference is about 30 to 40 meters. The measuring instruments include a vibration level meter used for pollution measurement and a data recorder, with signals lower than 1 Hz and higher than 90 Hz being interrupted. The environmental influence assessment discusses not only the maximum value of the vibration level, but also sizes of values of each band by using a frequency analysis. The result of the discussions revealed that the prediction of the vibration levels is little affected by phase characteristics, and that no problems are caused in the measurement accuracy even if the vibration levels are predicted by using relative decay amount according to a one-third octave analysis for the propagation characteristics. 5 figs., 4 tabs.

Prediction of strong acceleration motion depended on focal mechanism; Shingen mechanism wo koryoshita jishindo yosoku ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Kaneda, Y; Ejiri, J [Obayashi Corp., Tokyo (Japan)

1996-10-01

This paper describes simulation results of strong acceleration motion with varying uncertain fault parameters mainly for a fault model of Hyogo-ken Nanbu earthquake. For the analysis, based on the fault parameters, the strong acceleration motion was simulated using the radiation patterns and the breaking time difference of composite faults as parameters. A statistic waveform composition method was used for the simulation. For the theoretical radiation patterns, directivity was emphasized which depended on the strike of faults, and the maximum acceleration was more than 220 gal. While, for the homogeneous radiation patterns, the maximum accelerations were isotopically distributed around the fault as a center. For variations in the maximum acceleration and the predominant frequency due to the breaking time difference of three faults, the response spectral value of maximum/minimum was about 1.7 times. From the viewpoint of seismic disaster prevention, underground structures including potential faults and non-arranging properties can be grasped using this simulation. Significance of the prediction of strong acceleration motion was also provided through this simulation using uncertain factors, such as breaking time of composite faults, as parameters. 4 refs., 4 figs., 1 tab.

Study on the product estimation of small wind turbines; Kogata fusha no hatsudenryo yosoku ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Matsuzawa, K.; Kimura, Y.; Ushiyama, I. [Ashikaga Institute of Technology, Tochigi (Japan); Nagai, H. [Nihon Univ., Chiba (Japan). Coll. of Industrial Technology

1998-09-01

In order to clarify problems involved in application of Weibull probability distribution used for estimation of power production by a large wind turbine to a small wind turbine, and solutions thereof, the estimated results are compared with the observed ones. The conventional estimation method, when applied to a small wind turbine, tends to overestimate production of power, because of overestimated production in a high wind velocity range which occurs less frequently. Estimation of power produced by a wind turbine is based on working wind velocity range, determined from the furling mechanism for the power generation characteristics of the wind turbine concerned. In the case of a small wind turbine, on the other hand, better estimates are obtained from the working wind velocity range in which Weibull wind velocity distribution is used to determine probability of occurrence. For wind turbines working at low to medium wind velocities, such as Savonius wind turbine, the estimates are in fairly good agreement with the observed results, by which is meant that the conventional estimation method aided by Weibull distribution can be directly applicable to small wind turbines. 4 refs., 3 figs., 3 tabs.

Effects of diesel fuel additives on engine performance and reliability. Part 2. Effects of lubricity additives; Keiyu tenkazai ga engine seino oyobi shinraisei ni ataeru eikyo. 2. Junkatsusei kojo ni yoru eikyo

Energy Technology Data Exchange (ETDEWEB)

Matsudaira, J; Okada, M; Naruse, H [Toyota Motor Corp., Aichi (Japan)

1997-10-01

Many studies about the effects of lublicity additives for diesel fuel have been carried out and reported. These additives have already been used in Europe, north-America for couple of years and it has just started in Japanese market this July. This paper mainly describes the effects of lublicity additives on engine performance and reliability. At first, the effects on engine reliability were investigated during 30 thousand kms chasis dynamometer test. Secondary, the effects on piston ring corrosion, injection nozzle fouling and water separation were investigated. Furthermore, 70 thousand kms engine reliability test was conducted, and investigated some component parts. 2 refs., 10 figs., 4 tabs.

Survey on the international cooperation for resonable use techniques of energy; Energy shiyo gorika shuho kokusai kyoryoku chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

LCA (life cycle assessment) is known as one of the techniques for assessing reasonable use of energy considering environment. Usefulness of LCA was examined by checking the consistency between the assessment result on refrigerators by LCA and ISO standards. LCA can digitize the data on energy substances, wastes and emission of the whole system. LCA is useful for effective use and control of resources, and to clarify the reduction chance of environmental impacts. However, the framework is necessary to estimate the accuracy of assessment technique for every category, and the reliability of influence assessment. Like a risk assessment for environmental damages, identification of discharge sources beyond the assessment function of potentials is difficult. As the viewpoint of the whole life cycle is important, assessment of local damages is difficult. The complementary use of LCA and other tools about sustainable development is important. The comparison result between ISO provisions and this LCA case study showed that this concrete research report can play a role as text book for the ISO technique. 74 refs., 38 figs., 45 tabs.

Practical method for generation expansion planning based on the dynamic programming. Dynamic programming ni motozuku dengen keikaku shuho

Energy Technology Data Exchange (ETDEWEB)

Tanabe, R.; Yasuda, K.; Yokoyama, R. (Tokyo Metropolitan Univ., Tokyo (Japan))

1992-05-20

To supply cheap, high-reliable and a planty of the electricity is an important task of the electric supply system because the requirement for the electricity is rapidly increased in Japan. In order to solve this problem, the authors of the paper are developing a most suitable practical method based on algorithm, according to which the generation expansion planning is divided into two problems: the optimal generation mix and the optimal generation construction process and the two problems are solved respectively. But there are some bad points in the method, for example, there are only approximative practical restriction of the capacity of single machine and the existing electric supply etc., because the optimal generation mix is determined on the basis of non-linear planning. So, in the present paper, the electric supply support system is practically constructed while proposing an unified generation expansion planning based on the dynamic programming that is possible to consider these restrictions strictly and the usefullness of the method is inspected. 12 refs., 7 figs., 5 tabs.

Adaptation of topology optimization on truck-structure; Kinshitsukaho ni yoru iso saitekika shuho no truck kozo eno tekiyo

Energy Technology Data Exchange (ETDEWEB)

Tachibana, H; Kojima, A; Chiba, S [Mitsubishi Motors Corp., Tokyo (Japan)

1997-10-01

An optimization using the homogenization method has been applied to a truck-structure on the concept design stage. A truck-structure is grouped into 3 classes (thin plate structure , thick plate structure and solid structure), then example, effectiveness and method for the application for the purpose of weight reduction , high rigidity and high eigen-frequency are introduced. 3 refs., 24 figs., 1 tab.

Prediction of powerplant vibration using FRF data of FE model; Dentatsu kansu wo mochiita power plant shindo yosoku

Energy Technology Data Exchange (ETDEWEB)

Suzuki, T; Tsukahara, M; Sakaguchi, M; Takahashi, Y [Honda R and D Co. Ltd., Tokyo (Japan)

1997-10-01

For the purpose of shortening the development period, the estimation of powerplant vibration has become more important in the early design stage, and eigenvalue analysis by FEM is commonly used to solve this problem. Eigenvalue Analysis cannot directly predict vibration levels under running conditions that affect the durability of each component and the vibration of a car body. This paper presents a new approach using FRF data from FE models for accurate prediction of engine vibration under running conditions. By applying this approach to an in-line four cylinder engine, the predicted vibration is reasonably comparable with experimental results. 3 refs., 8 figs.

Estimation of the charge quantity from solar cell to battery; Taiyo denchi ni yoru chikudenchi eno juden yosoku

Energy Technology Data Exchange (ETDEWEB)

Tsutsumi, K; Nishitani, M [Daiichi University, College of Technology, Kagoshima (Japan)

1996-10-27

In performing an experiment of running a small electric vehicle by installing solar cells in it and by charging the storage battery at a specific voltage, an estimation was made on the charge quantity to the battery for each solar altitude and inclination of a module at different hours. The solar altitude was determined at Daiichi University, College of Technology, according to the month and the time of day from a formula using day-declination and time equation of a chronological table of science. The quantity of global solar radiation was determined by resolving the solar radiation into its direct and diffuse components on the basis of the extra-terrestrial solar radiation quantity with the change in radius vector taken into consideration; and then, the global solar radiation on the inclined face was obtained from the angle of inclination and incidence. On the roof of a Daiichi University building, solar cell modules were installed facing north and south at 0{degree}, 30{degree}, 45{degree}, 60{degree} and 90{degree} each, so that a short-circuit current was measured for each differently inclined angle. As a result of the experiment, shown in an regression formula is a relation between the temperature conversion value of the maximum output of the solar cell at the standard temperature of 25{degree}C and the quantity of solar radiation on the inclined surface. Consequently, it enabled the prediction of a charging quantity, in the case of running a small vehicle with solar cells installed, from the quantity of solar radiation on the inclined surface in the clear weather. 2 refs., 4 figs., 2 tabs.

Investigation of design method for air-conditioning system using CAE; CAE wo mochiita kucho haifu yosoku no ichikosatsu

Energy Technology Data Exchange (ETDEWEB)

Matsumoto, M; Miyake, N; Takeuchi, T; Kori, I [Mitsubishi Motors Corp., Tokyo (Japan)

1997-10-01

Designing the air-conditioning system, the distributions of the flow rate and the temperature at each air outlet are important factors. This paper describes the prediction method using CFD (Computational Fluid Dynamics), which is based on the `{kappa}-{epsilon} turbulence model` and unstructured grid system. It is proved that conventional tetrahedral grid system gives adequate results for the flow rate prediction. However, it is also found that improvement is required for the thermal prediction. At the result, we suggested that the `prism mesh`, which has been developed for detailed calculation of the boundary layer properties, is essential for such the heat transfer problem. 4 refs., 13 figs.

Performance analysis of dish solar stirling power system; Stirling engine wo mochiita taiyonetsu hatsuden system no seino yosoku

Energy Technology Data Exchange (ETDEWEB)

Tsuchiya, K; Yamaguchi, I [Meiji University, Tokyo (Japan); Naito, Y; Momose, Y [Aisin Seiki Co. Ltd., Aichi (Japan)

1996-10-27

In order to estimate the performance of the dish solar Stirling power system, matching and control of each component system were studied, and the performance of the 25kWe class power system was estimated on the basis of direct solar radiation measured in Miyako island, Okinawa. Application of a Stirling engine to solar heat power generation is highly effective in spite of its small scale. The total system is composed of a converging system, heat receiver, engine/generator system and control system. As the simulation result, the generator output is nearly proportional to direct solar radiation, and the system efficiency approaches to a certain constant value with an increase in direct solar radiation. As accumulated solar radiation is large, the influence of slope error of the converging mirror is comparatively small. The optimum aperture opening ratio of the heat receiver determined on the basis of mean direct solar radiation (accumulated solar radiation/{Delta}t (simulated operation time of the system)), corresponds to the primary approximation of the opening ratio for a maximum total generated output under variable direct solar radiation. 6 refs., 6 figs., 1 tab.

Survey of an evaluation method for research and development projects; Kenkyu kaihatsu project no hyoka shuho ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This report describes an interim evaluation method and a concrete evaluation method for projects promoted by the Agency of Industrial Science and Technology, and NEDO. As a result of the survey, a method of highly practical interim evaluation, concrete evaluation items, and evaluation criteria have been proposed by assuming that the projects are evaluated by the project evaluation department independent of the project promotion department. Long-term issues for constructing the evaluation system are also described. It is the most essential for the evaluation to fulfill the function of effective promotion of the following projects. It is also indispensable for the evaluation method and issues proposed in this report to communicate closely to project promoters and researchers, and to reassess the projects continuously. Continuous consideration for the feedback of evaluation process and the improvement of evaluation are significant for the long-term construction of system. 21 refs., 9 figs., 23 tabs.

Effect of water pollution on marine organisms; Sekiyu osen no kaiyo seibutsu eno eikyo hyoka

Energy Technology Data Exchange (ETDEWEB)

Ogata, M. [Okayama Univ., Okayama (Japan); Fujisawa, K. [Okayama Prefectural Fisheries Experiment Station, Okayama (Japan)

1997-10-10

Toxicity of petroleum component to aquatic organisms appears as a result of its deposition onto living organisms followed by its migration into bodies of the organisms, and emergence of toxicity from the migrated component. Effect evaluation processes standing on this viewpoint may include the exposure monitoring or migration monitoring, in which the petroleum component migrated into marine organisms is analyzed and the state of the component concentrated in these organisms is measured, or effect monitoring, in which actions of the petroleum component in the organisms are investigated. The effects of petroleum on aquatic organisms would include the following occurrence: direct fatal toxicity acting on cells and membranes, quasi-fatal toxicity causing death indirectly through feeding actions and abnormal actions, direct coating of oil on surface of organisms, which prevents movability and feeding actions of the organisms and reduces hydrophilicity of plumes and hairs, pollution of living organisms due to migration of carcinogenic aromatic compounds into bodies of the living organisms, and change in species compositions and geographic distribution of living organisms due to change in physico-chemical environment. This paper explains cases of detection and identification of organic sulfur compounds, aromatic compounds, polycyclic aromatic compounds, paraffins, olefins and heavy metals in parametric compounds of petroleum. 20 refs., 4 figs., 3 tabs.

Effect of fluid-filled boreholes on resistivity tomography; Hiteiko tomography ni okeru konaisui no eikyo

Energy Technology Data Exchange (ETDEWEB)

Sugimoto, Y [DIA Consultants Co. Ltd., Tokyo (Japan)

1997-10-22

Theoretical discussions were given on the effect of fluid-filled boreholes on resistivity tomography. The discussions performed incorporation of earth resistance as a method to consider borehole diameters in an FEM calculation using wire elements. The numerical experiment conducted a simulation on the following two objects: resistivity tomography in a horizontal multi-layer structure consisted of layers with resistivity ranging from 10 to 10000 ohm-m, and a model with a slanted low resistivity band existing in a background of 5000 ohm-m. As a result of the discussions, it was made clear that the effect of the boreholes can be corrected by giving earth resistance between the wire elements and natural ground. An improved potential calculating program indicated that the effect of the fluid-filled boreholes in the resistivity tomography generates false images with high resistivity along the bores if the resistivity has high contrast. Incorporating the wire elements into an inverse analysis model reduces the false images and improves the accuracy. 1 ref., 12 figs.

Influence of life line stoppage on building equipments; Lifeline tozetsu no kenchiku setsubi eno eikyo

Energy Technology Data Exchange (ETDEWEB)

Sadohara, S. [Yokohama National University, Yokohama (Japan). Faculty of Engineering

1995-06-05

Our daily life is being supported by electricity in various ways. This paper, explains the influence of the stoppage of the electricity, affecting infrastructures, buildings and people`s daily life based on the survey result of a long term electricity stoppage in Hiroshima City in September 1991. This paper also introduces the survey result of emergency generators operation in Japan and in the U.S. Last, the ways and ideas to make lifeline reliability higher in the future are summarized. 1 ref., 11 figs., 7 tabs.

Effects of organophosphoric acid triesters on human health; Yuki rinsan toriester rui no kenko eikyo

Energy Technology Data Exchange (ETDEWEB)

Hirose, A. [National Institute of Hygienic Sciences, Tokyo (Japan)

1996-09-10

This paper describes the effects of organophosphoric acid triesters (OPEs) on human health. Tri-o-cresyle phosphate is metabolized in vivo, and forms neurotoxic esterase hindrance substance. More neurotoxic substance is formed by introduction of hydroxyl group into methyl group and cyclization. The toxicity is largely dependent on kinds of animals and individuals. Tris-(2,3-dibromopropyl) phosphate, trimethyl phosphate and tris-(2-ethylhexyl) phosphate give a carcinogenesis to experimental animals. In order to evaluate the effect of detected OPE concentrations in actual environment on human health, the genotoxicity of OPEs should be determined. In the case of no genotoxicity, the allowable intake of OPEs is determined by multiplying a safety factor by NOEL obtained from animal experiment. In the case of clear genotoxicity, the allowable intake is determined by model calculation. Although the toxicity of simple OPE is weak, the synergistic effect of multiple exposure is yet unidentified. 23 refs., 2 figs., 1 tab.

Prediction of vibration level in tunnel blasting; Tonneru kusshin happa ni yotte reiki sareru shindo no reberu yosoku ho

Energy Technology Data Exchange (ETDEWEB)

Hirata, A. [Kumamoto Industries Univ, Kumamoto (Japan); Yamamoto, M. [Asahi Chemical Industry Co. Ltd., Tokyo (Japan); Inaba, C. [Nishimatsu Construction Co. Ltd., Kanagawa (Japan); Kaneko, K. [Hokkaido Univ (Japan)

1997-08-01

For avoiding the generation of public hazard due to ground vibration causes by blasting in tunneling, it is important to devise a blasting method for ensuring the level of the ground vibration caused thereby under a limit, and an exact predication of ground vibration before blasting is desirable. In this study, the characteristics of the ground vibration caused by tunnel blasting are analyzed, and a summary of amplitude spectra calculating method is described. A theoretical analysis method for predicting the vibration level is proposed based on spectrum-multiplicative method. Vibration caused by multistage blasting in tunneling is most strong and deemed as important. When observing the process of elastic wave motion caused by multistage blasting being measured, the process can be divided into three element processes in frequency area as vibration source spectrum, transmission attenuation spectrum and frequency response function vibrating test, and, with the multiplication of them, the amplitude spectra at an observation portion can be estimated. 12 refs., 12 figs.

Prediction of DI diesel engine emissions by multidimensional simulation; Tajigen simulation ni yoru DI diesel engine no seino yosoku

Energy Technology Data Exchange (ETDEWEB)

Ishii, Y; Zhang, L; Hamaguchi, K; Minami, T; Yokota, K [Isuzu Advanced Engineering Center, Tokyo (Japan)

1997-10-01

To achieve the goal of using multidimensional simulation as a useful tool for predicting engine emissions in the stage of design or choice chamber shape and nozzle specifications, much work is needed to improve and modify calculation models. In this study , the spray model of KIVA-II have been modified using experimentally measured penetration of spray liquid phase. The modified KIVA-II was applied to a HSDI engine with different chambers and injectors. As a result of comparing with experiments, it was found that the KIVA-II using the modified spray model could relatively predict the change of emissions. 6 refs., 12 figs., 2 tabs.

FY1995 report on the novel methods for magnetic resonance imaging; 1995 nendo senshin MRI gazoka shuho no kiso kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The purpose of this project is to develop new 2-dimensional ultrafast MRI (Magnetic Resonance Imaging) methods for the Image Guided Cancer Therapy (IGT) and the non-invasive clinical diagnosis. We have developed two MRI methods. They can reconstruct a two dimensional image by only a RF excitation and slow changing of gradient fields. This paper describes theoretically how to apply the RF wave and the gradient in x, y and z direction, respectively. Echo signals are acquired under multi-frequency resonance. The frequency bandwidth of the RF wave adjusts the field of view (FOV) of the imaging plane. Biological effects of the applied RF wave was evaluated by the brain microdialysis. In animal experiments, these was not significant change of neurotransmitters subject to the RF wave. From these theoretical and experimental results, these MRI methods are applicable to IGT and the clinical diagnosis for the cancer and other diseases. (NEDO)

Effect of groupware introduction on office works; Groupware donyu no white color gyomu e ataeru eikyo

Energy Technology Data Exchange (ETDEWEB)

Baba, K. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1996-05-01

Investments for information systems in Japanese firms have been shifting from those for main frame systems to PC, LAN and groupware systems. Described herein are effects of groupware introduction on office works, and efficient introduction and practical application of these systems. The groupware functions are divided into information sharing, analyzing, integrating and coordinating functions, and changed information transmission as a result of practical application of each function has been followed by literature and questionnaire surveys on experiences at advanced enterprises. The results indicate that the changes are represented by 6 patterns, from replacement of information media to changes in working styles. The major productivity-related effects brought by introduction of these systems are decreased document volumes and improved skills of employees. The notable effects on office works are improved efficiency resulting from allotting one personal computer to each employee and from introduction of E-mail systems which solve problems involved in telephone communication. 15 refs., 11 figs., 10 tabs.

Prediction of velocity of the wind generation in Kobe City College of Technology; Kobe Kosen ni okeru furyoku hatsuden no yosoku

Energy Technology Data Exchange (ETDEWEB)

Akamatsu, K; Kanemura, M; Amako, K

1997-11-25

Wind conditions, such as average wind velocity for 10 minutes, maximum instantaneous wind velocity and wind directions, are measured by the anemometer and anemoscope installed 3m above the roof of the Kobe City College of Technology`s Information Processing Center building, to collect the data necessary to validate possibility of wind power generation, if the wind system is installed in the college site. Monthly availability of power is estimated from the output power characteristics curve for a generator having a rated capacity of 200W and wind velocity data collected for 9 months. It will generate power of only 144kWh, even when operated to give the rated output, or approximately 8.5kWh at the highest in a month, because of availability of wind power limited to around 30% of the total as estimated from the relative frequency distribution. It is therefore desirable to install a number of units having a rated capacity of 200W or else a smaller number of larger units. Assuming that days that give the highest output for 24 hours last 1 month, a power of 54.3kWh will be generated. It is estimated, based on these results, that a hybrid unit, in which a wind power generator installed at a high place is combined with a solar unit, can provide power required for nighttime lighting, if a wind power unit having a rated capacity of 2kW is field-controlled under an optimum condition. 13 figs., 3 tabs.

Case study of geostructural prospect of a tunnel by using geophysical methods; Butsuri tansa ni yoru tunnel chisan yosoku to jissai

Energy Technology Data Exchange (ETDEWEB)

Ueda, H [Japan Railway Construction Public Corp., Tokyo (Japan); Kawakami, J [Taisei Construction Corp., Tokyo (Japan); Nagasue, I; Hiwatashi, S; Wakuno, M [Oyo Corp., Tokyo (Japan)

1997-05-27

A preliminary survey was carried out by combining elastic wave exploration (using a refraction method) and electrical exploration (using a resistivity imaging method) on a long tunnel planned in a granite distributed area. This paper describes a case of verifying geological condition in the area by using a trial survey well and horizontal boring. This tunnel goes through the Seburi mountainous area on the border of Fukuoka Prefecture and Saga Prefecture for a total distance of 12 km. The refraction method and the resistivity imaging method were selected from the necessity of identifying the weathering condition in natural ground, and distributions of fault crush zones and underground water in a section extending 560 m from the well entrance. As a result of comparing the natural ground condition interpreted from the geophysical survey results with the construction records, the fault was detected as a cracked or deformed section in the part where the resistivity value changes abruptly or where the resistivity is low. The tunnel natural ground classification showed a good correspondence with the elastic wave velocities. The largest flooding section showed a good agreement with the section where the resistivity changes suddenly to a lateral direction. Thus, the geological information interpreted from both surveys presented a good correspondence with the construction records, leading to a judgment that the prediction is possible. 3 refs., 4 figs., 5 tabs.

Vertical gust response prediction of cable-stayed bridges in yawed wind; Shachokyo no shafu ni yoru enchoku gust oto no yosoku

Energy Technology Data Exchange (ETDEWEB)

Nakamura, S.; Nagamachi, K.; Kawai, Y. [Kawasaki Steel Corp., Tokyo (Japan); Kimura, K.; Fujino, Y. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering; Tanaka, H.

1996-03-01

This paper outlines the vertical gust response analysis method in a yawed wind, gives an analytic example, and compares the experimental result with the analytic result to investigate the application of an analysis method and the validity of assumption and approximation. The vertical gust response to two cable-stayed bridges under construction in a yawed wind was predicted by applying assumption and approximation to the gust response prediction method in a yawed wind with the cantilever model having a plate cross-section manipulated. In this case, the wind velocity component perpendicular to the leading edge was defined as an effective wind velocity, and a bridge axis and the component perpendicular to a bridge axis were separately calculated in response. Moreover, some aerodynamic coefficients of a bridge girder cross-section were approximately obtained from the characteristics of the flat blades with same aspect ratio. The obtained analytic result was compared with the wind tunnel test result based on all bridge models. The result showed that the former almost coincides with the latter, the assumption and approximation of this time are verified in validity, and this analysis method can be used for cable-stayed bridges under construction. 10 refs., 7 figs., 2 tabs.

Effect of ambient gas density for diesel spray; Diesel funmu ni taisuru fun`iki mitsudo no eikyo

Energy Technology Data Exchange (ETDEWEB)

Yokohashi, M; Suzuki, T; Oshima, R [Tohokugakuin University, Sendai (Japan); Ono, A [Shinryo Corp., Tokyo (Japan)

1997-10-01

Effect of ambient gas density for fuel spray are measured to investigate the Diesel spray behavior. The change of ambient gas density has been given by pressuring N2 gas and using a high density atmospheric pressure SF6 gas. The measurement are performed for the spray penetration and angle. As a result, the spray penetration is confirmed same tendency at the change of density by pressuring N2 and using SF6. Though spray angle is required modification with viscosity. 2 refs., 11 figs.

Estimated method of permeability in the granitic rocks by geophysical loggings; Butsuri kenso shuho ni yoru kakoganchu no tosuisei ni kansuru ichikosatsu

Energy Technology Data Exchange (ETDEWEB)

Matsuoka, K; Hashimoto, N. [Geophysical Surveying and Consulting Co. Ltd., Tokyo (Japan)]Ogata, N. [Power Reactor and Nuclear Fuel Development Corp., Tokyo (Japan)

1997-10-22

Water permeability in granite is estimated by performing geophysical investigation using a 500m-deep test hole drilled in granitic rocks in the vicinity of a Tono mine. The investigation consists of flowmeter logging and geophysical logging. In flowmeter logging, a probe is moved up and down in the hole at a constant speed by use of a cable, and the cable speed and impeller revolution are used to workout the relative speed of the fluid in the hole. In the geophysical logging, a probe attached to the leading end of a logging cable is replaced with other probes so as to acquire different geophysical data. In a hole drilled in a crack-abundant rockbed such as a granitic rockbed, the inflow and outflow of ground water is governed mainly by water-permeable crack zones, and the result of the flowmeter logging show that this hole has three highly water-permeable zones. Using the results of the loggings, a correlative equation is worked out between changes in flow speed and changes in permeability index obtained by hydraulics tests. Among the various results achieved by the geophysical logging, a fine correlationship is found between an equation relative to permeability obtained using electricity and density and water-permeability indexes obtained by hydraulic tests conducted in situ. 4 refs., 8 figs., 1 tab.

Improvement of D.I. diesel engine combustion using numerical simulation; Chokufun diesel kikan no nensho kaizen shuho. Suchi kaiseki ni yoru torikumi

Energy Technology Data Exchange (ETDEWEB)

Minami, T.; Adachi, T.; Isyii, Y. [Isuzu Motors Ltd., Tokyo (Japan)

1999-04-01

For the purpose of improving DI diesel engine combustion, it is important to predict air flow of intake and exhaust manifold, intake port flow, combustion chamber swirl and fuel spray combustion. This paper describes the application of numerical simulation to the engines, the analysis of phenomena and a problem of simulation model modification. (author)

Method for evaluating environmental performance of technologies by using the interindustry relations table; Sangyo renkanhyo wo mochiita gijutsu no kankyosei hyoka shuho

Energy Technology Data Exchange (ETDEWEB)

Hondo, Y. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1997-01-30

This paper describes a proposal of a method for evaluating environmental performance of technologies by using the interindustry relations table, and the case studies thereof. This method is characterized in that it can evaluate two effects affecting the environment: structuring of capital facilities required in association with introduction of the technologies and the changes in social structures. As a parameter to compare the technologies considering these effects, a concept of life cycle limited emission amount was introduced. In the case studies, life cycle limited CO2 emission amounts from using seven kinds of technologies were calculated, and environmental performances of each technology were compared. The result indicated that introduction in Japan of coal, oil and LNG fired thermal power generation will increase CO2 emission amount from the whole society. Conversely, introduction of hydraulic, nuclear, photovoltaic, and wind power generation technologies will reduce the CO2 emission amount. It is pointed out particularly that hydraulic and nuclear power generation can minimize CO2 emission from structuring capital facilities, and is an excellent technology from a viewpoint of reducing CO2 emission from the society as a whole. 5 refs., 6 figs., 1 tab.

Examination of optimal data acquisition for evaluation of PV systems; Taiyoko hatsuden system hyoka no tame no saiteki keisoku shuho no kento

Energy Technology Data Exchange (ETDEWEB)

Sugiyama, H; Kurokawa, K [Tokyo University of Agriculture and Technology, Tokyo (Japan); Otani, K; Tsuda, I [Electrotechnical Laboratory, Tsukuba (Japan)

1996-10-27

A 70 kW-class photovoltaic (PV) power generation system of the Tsukuba Research Cooperation Center, Agency of Industrial Science and Technology was evaluated using hourly measurement data. Hourly solar irradiation, mean PV module temperature, hourly array generated power, hourly PV system generated power were selected as the measurement items, to examine the validity of measurement method. Furthermore, based on these measurement data, the loss factors were estimated, which reduce the system efficiency. They included the losses due to the shadow effect, the deterioration of module efficiency with the raise of temperature, the mismatch of tracking control of the maximum power point, and the reduction of inverter efficiency with the input power phenomena. To estimate these loss factors from hourly measurement data, the system was evaluated by defining characteristic parameters. As a result, it was found that the main factors were the shadow effect and the mismatch loss, which reduce the mean annual output factor of the system to 65%. 3 refs., 6 figs., 1 tab.

Investigation and study on each technique and example of intelligent planning; Intelligent planning no kakushu shuho to jirei ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-11

Various problems on intelligent planning (IP) and the tendency of basic technology were investigated. For each technique of IP, a Petri net and mark graph have been widely used as the modeling and analysis methods of a discrete event system. Moreover, various planning problems were modeled by a traveling salesman problem, and the efficient solution of the traveling salesman problem has been studied simultaneously. The tendency of the basic technology and application system viewed from an example of intelligent plant planning was investigated as an applied field of planning technology, with importance attached to the production system and robot planning. In the scheduling technology of the production system, the activation of an AI study and a new theory (i.e., architecture study) based on natural science information was investigated with the transition in the world as a trigger. A robot system has been planned in a wide range such as the environmental information acquisition planning of a robot. 202 refs., 69 figs., 4 tabs.

Study about the effect of microgravity on biofunctions; Seitai kino eno bisho juryoku no eikyo ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A study is made for the elucidation of the effect of microgravity on biofunctions. The protoplast of shiitake is exposed to microgravity and then cultured, and a significant difference occurs. The rate of colony formation by cell fusion in the test sector is found to be two times higher than that in the control sector. When swimming ciliates which are unicellular are suddenly exposed to microgravity, their swimming speeds changed differently according to the direction of swimming. When a mouse subjected to acupuncture for three days is exposed to microgravity, its water metabolism and excretory function are enhanced. A mouse treated with Chinese medicine reacts in the similar way. The change due to microgravity in the amount of acetylcholine in the hypothalamus is found characteristically time dependent. Mice infected with lethal herpes viruses just after exposure to microgravity die at a rate in proportion to the number of exposures and to the amount of viruses given. The migration speed of chemical stripes in case of a gel-base BZ (Belousov-Zhabotinsky) reaction under microgravity is equal to that on the ground. The trigger wave migration speed in case of a water solution-base BZ reaction under microgravity is reduced to approximately 80% of the speed on the ground. 12 refs., 31 figs., 3 tabs.

Ecological processes for Environmental Impact Assessment in Coastal Waters; Engan no kankyo eikyo hyoka (EIA) eno seitaigakuteki apurochi

Energy Technology Data Exchange (ETDEWEB)

Ishikawa, Kimitoshi. [Environmental Assessment Dept., Tokyo (Japan)

1999-03-25

This paper focuses on a method for estimating adverse effects on natural environment by economic development in coastal waters in Japan. In particular, the most critical relations concerning the impact on marine organisms is pointed out and discussed according to an environmental impact assessment. Relations between environmental impact assessment and marine organisms needs a quantitative ecological approach in order to succeed in sustainable development of coastal waters management. Recently, the Environment Agency of Japan pointed out the unreliability and the theme on accuracy and the staff for biology and ecology in the environmental impact study. Ecological response to environmental impact occurs in a wide spectrum of physiological and biological and biological functions. Therefore biological monitoring measures must correspond to the given time-space scale of natural mechanisms. For the evaluation of environmental impact, it is desire able to develop of experimental technics and collect biological and ecological basic data for the object. I Reconstructing the following: 1. Reconstructing a clearlistic EIA process by EIA agencies and practitioners, 2. Scorping the biological and ecological issues by EIA professionals, 3. Using the current computer technology, 4. Considering monitoring systems over scales of time and space for the ecological target and 5. Making available to public all monitoring data and reports of EIA. (author)

Influence of traffic situation on a driver`s visual behavior; Kotsu jokyo ga shinin kodo ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Kisumi, E; Hara, t [Mitsubishi Motors Corp., Tokyo (Japan)

1997-10-01

When a driver performs an in-car visual task, that task must be time-shared with the driving task. Therefore, his/her glances would be divided between the forward view and the in-car visual display in accordance with traffic situation. In order to investigate the influence of traffic situation on glance duration distribution, an experiment for in-car visual task was conducted using Mitsubishi`s flat-belt driving simulator. As a result, a glance duration tends to shorten as driving task demands increase, such as driving at high speed, being overtaken, etc., and a glance cycle tends to shorten under the same situation. 5 refs., 8 figs., 1 tab.

Fiscal 1998 research report on the international cooperation for techniques of rational energy use; 1998 nendo energy shiyo gorika shuho kokusai kyoryoku chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For promotion of the implementation of LCA, 'Japan-Europe joint project for LCA (life cycle assessment) of photocopiers' was established. The following organizations were selected for this project; Material Research Institute of the Swiss Confederation (EMPA), PE Engineering (PE) consortium and Stuttgart University (IKP) of Germany, Leiden University of the Netherlands (CML), and Pre Consultant of the Netherlands as the European coordinator of the project. The project includes the following as issues: The estimation method of material composition/production process data from parts names, practical data items (kind of materials, inventory data) used by European institutes, the guidance for construction of Japanese LCA database, and the viewpoint of inventory accuracy. The following are also reported: the limitation of possible impact assessment based on current inventory analysis data, the viewpoint on the time dependence and regional one of impact assessment, and the viewpoint on integration of impact assessment. (NEDO)

Fiscal 1999 survey report. Survey of international cooperation over energy use rationalization techniques; 1999 nendo energy shiyo gorika shuho kokusai kyoryoku chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In the past, studies have been conducted involving the possibility of development of information offering techniques for the realization of sustainable society, for which LCA (life cycle assessment) as a tool for reducing energy consumption and environmental impact is investigated and case studies are conducted in this connection. In this fiscal year, for the purpose of deliberating how to utilize the LCA results, a survey is conducted of how LCA is being used as a tool for constructing an environmental management system set forth in the ISO14000 series, by holding conferences with LCA researchers representing the respective countries involved. Investigations are conducted into the actualities of the environmental management system, environmental performance assessment, and environmental labelling whose standardization has been under way in compliance with the ISO14000 series, into the actualities of matters relating to assessment techniques and decision making such as environmentally-friendly designing, supply chain management, reports on environments, etc., which are becoming established in enterprises, and into the actualities of access to and disclosure of information. International cooperative researches are conducted, participated in by five leading organizations of Sweden, Germany, Denmark, and Canada, and Japan's National Institute for Resources and Development, where actual states of LCA utilization are introduced and improvement on LCA techniques are discussed. (NEDO)

Fiscal 1999 survey report. Survey of international cooperation over energy use rationalization techniques; 1999 nendo energy shiyo gorika shuho kokusai kyoryoku chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In the past, studies have been conducted involving the possibility of development of information offering techniques for the realization of sustainable society, for which LCA (life cycle assessment) as a tool for reducing energy consumption and environmental impact is investigated and case studies are conducted in this connection. In this fiscal year, for the purpose of deliberating how to utilize the LCA results, a survey is conducted of how LCA is being used as a tool for constructing an environmental management system set forth in the ISO14000 series, by holding conferences with LCA researchers representing the respective countries involved. Investigations are conducted into the actualities of the environmental management system, environmental performance assessment, and environmental labelling whose standardization has been under way in compliance with the ISO14000 series, into the actualities of matters relating to assessment techniques and decision making such as environmentally-friendly designing, supply chain management, reports on environments, etc., which are becoming established in enterprises, and into the actualities of access to and disclosure of information. International cooperative researches are conducted, participated in by five leading organizations of Sweden, Germany, Denmark, and Canada, and Japan's National Institute for Resources and Development, where actual states of LCA utilization are introduced and improvement on LCA techniques are discussed. (NEDO)

Estimation of clearness index using neural network with meteorological forecast; Kisho yoho wo nyuryoku toshita neural network ni yoru seiten shisu no yosoku

Energy Technology Data Exchange (ETDEWEB)

Nishimura, S; Kenmoku, Y; Sakakibara, T [Toyohashi University of Technology, Aichi (Japan); Nakagawa, S [Maizuru National College of Technology, Kyoto (Japan); Kawamoto, T [Shizuoka University, Shizuoka (Japan)

1997-11-25

Discussions were given on estimation of clearness index in order to operate stably a solar energy utilizing system. All-sky insolation amount varies not only by change in the climate, but also seasonal change in the sun`s altitude. Therefore, a clearness index (ratio of all-sky insolation to out-of-atmosphere insolation) was used. The larger the value, the higher the solar ray permeability. The all-sky insolation amount is a measured value, while the out-of-atmosphere insolation amount is a calculated value. Although the clearness index may be roughly estimated by weather forecast, the clearness index varies largely even on the same weather forecast, especially for cloudy days, if a weather forecast actually having error is used. Therefore, discussions were given on estimation of the clearness index by using a neural network which uses meteorological information such as air temperatures and precipitation probabilities as inputs. Using multiple number of meteorological forecast information simultaneously has reduced the average square error to 49% of that using only the weather forecast. The estimation accuracy depends on the accuracy of meteorological forecast, but using multiple number of forecast information can improve the accuracy. 6 refs., 7 figs., 1 tab.

Influence of oil starvation on piston ring oil film thickness; Junkatsuyu kyokyuryo fusoku ga ring yumaku ni ataeru eikyo

Energy Technology Data Exchange (ETDEWEB)

Hiruma, M [Musashi Institute of Technology, Tokyo (Japan). Hydrogen Energy Research Center; Takiguchi, M [Musashi Institute of Technology, Tokyo (Japan)

1997-10-01

An analytical behavior of the piston ring oil film has been carried out theoretically under the condition where sufficient lubrication oil dose not exist. Phenomena have been studied on the oil film when plural rings slide together on the surface of cylinder with a new concept in addition to the well-known assumptions. In particular, a comparison has been made on the friction force with the data obtained by the floating liner method. 5 refs., 9 figs.

Loading test of pile affected by soil layer deformation; Jiban henkei no eikyo wo ukeru kui no saika jikken

Energy Technology Data Exchange (ETDEWEB)

Kakurai, M.; Tsuchiya, T. [Takenaka Corp., Osaka (Japan)

1997-10-10

Large soil tank developed for shearing experiments is used to study the horizontal movement of piles in earthquakes. The system comprises a soil filled (8m deep) tank, pile head loading jig, and 6 actuators. The soil tank is fabricated of 40 layers of 20cm-high iron frames of inner dimensions 2.5mtimes2.5m, and it is filled with soil that is to simulate the ground. The frames are divided into 4 groups each containing 10 frames, and the frames in each group are coupled with each other, so that all the frames in one group will move horizontally when the topmost frame in the group is moved horizontally. An actuator, which travels horizontally ganging with a computer, is mounted on the top frame in each group, and this setup enables the arbitrary simulation of ground deformation in the horizontal direction in an earthquake. The pile head loading jig, driven by 2 actuators, can keep restraining the pile head from rotation while applying load or deforming force to the pile head as desired in the vertical and horizontal direction. Experiments conducted using this system involve the force imposed on a pile in the soil tank by ground deformation and the resultant pile behavior including breakdown. 9 figs.

Improvement of motor inertia influence of electric power steering; Dendoshiki power steering no motor kansei no eikyo to hosho

Energy Technology Data Exchange (ETDEWEB)

Takehara, S; Sakamoto, K; Hanamoto, Y [Mazda Motor Corp., Hiroshima (Japan); Noritsugu, T [Okayama University, Okayama (Japan)

1997-10-01

Motor inertia of electric power steering affects not only steering characteristics but vehicle dynamics. We have investigated the influence of motor inertia and proposed a feedback strategy to compensate it. Weight of the test vehicle is 1100Kg and the steering system is pinion type electric power steering. By using simulation model and vehicle test, we have realized natural steering maneuvering and stable vehicle dynamics. 4 refs., 11 figs.

Fiscal 1997 survey report on international cooperation for the energy use rationalization method; 1997 nendo jigyo hokokusho (energy shiyo gorika shuho kokusai kyoryoku chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

To carry out LCA in ISO-14040, inventory analysis (IA) is the basic. For studying arrangement of public data to carry out IA, collection work was done of background data which are indirectly concerned with copying machine. First, methods to make inventory data (ID) which are thinkable in the present situation were prepared, and items of emitted matters to be collected were set up in relation to the impact assessment method. Secondly, scenarios of each stage of life cycle of copying machine were set up, and virtual data on the material/energy consumption amount were arranged. Based on this, a method was further studied for making ID of the parts used in electric power, iron/steel, plastics, and copying machine. Third, based on the above-mentioned study results, ID was actually made, and a possibility was studied of making inventory in life cycle of copying machine. Moreover, the state of the automobile LCA carried out at Stuttgart University was examined. At last, the paper summed up subjects of and future study methods for the inventory making method. 2 refs., 25 figs., 77 tabs.

Efficient calculation of potential distribution in two-layer earth; Niso kozo daichikei ni okeru denki tansa no tame no koritsuteki den`i keisan shuho

Energy Technology Data Exchange (ETDEWEB)

Kataoka, M; Okamoto, Y [Chiba Institute of Technology, Chiba (Japan); Endo, M; Noguchi, K [Waseda University, Tokyo (Japan); Teramachi, Y; Akabane, H [University of Industrial Technology, Kanagawa (Japan); Agu, M [Ibaraki University, Ibaraki (Japan)

1997-05-27

An efficient calculation method of potential distribution in the presence of an embedded body in multi-layer earth has been proposed by expanding the method of image with a consideration of multiple reflection between the ground surface and each underground boundary. For this method, when solving boundary integral equation with the potential of embedded body surface as only one unknown, i.e., when obtaining discretization equation, ordinary boundary element program developed for analyzing the finite closed region can be used. As an example, numerical calculation was conducted for the two-layer earth. The analysis expression of potential distribution in the case of the certain embedded body in two-layer earth has never published. Accordingly, the calculated results were compared with those by the integral equation method. As a result, it was concluded that the primary potential obtained from the present method agreed well with that obtained from the integral equation method. However, there was a disregarded difference in the secondary potential. For confirming the effectiveness, it was necessary to compare with another numerical calculation method, such as finite element method. 5 refs., 5 figs.

FY 2000 report on the results of the R and D of the prediction technology for environmental effects of CO2 ocean sequestration. Ocean survey and development of the assessment technology for capacity of CO2 sequestration; 2000 nendo nisanka tanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu seika hokokusho. Kaiyo chosa oyobi CO2 kakuri noryoku hyoka gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Assuming the dissolution/sequestration of CO2 at the medium-depth sea area around Japan (depth: 1,000-2,000m), the development was being proceeded with of the assessment technology for capacity of CO2 ocean sequestration and the prediction technology of environmental effects at the point of CO2 discharge. In FY 2000, conducted were the ocean survey and the development of assessment technology for CO2 sequestration capacity. In the investigational study, the following three were carried out: 1) survey/observation of the flow field on the line of 165 degrees of east longitude, and acquisition of various data such as the distribution of carbonic acid base substances and the speed of carbon transport; 2) study of the amount of existence of organisms and kind/composition of the medium-depth plankton at the typical observation points; 3) test/experiment actually conducted in the sea area for the experimental equipment for CaCO3 dissolution experimental equipment for studying interactions between the CO2 and CaCO3 dissolved into the medium-depth sea. As to the development of the assessment technology, carried out were the heightening of accuracy of medium-depth ocean circulation models using the inverse method already developed and the estimation of the flow field using the observation data. At the same time, the estimation of the flow field, etc. were conducted using large circulation ocean models. (NEDO)

Report on achievements in fiscal 1998. Research and development of a technology to forecast environmental effect in association with isolation of carbon dioxide in oceans. Ocean surveys and development of a technology to evaluate CO2 separation capability; 1998 nendo nisanka tanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu seika hokokusho. Kaiyo chosa oyobi CO{sub 2} kakuri noryoku hyoka gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Assuming that CO2 is dissolved and separated in the middle layer in a sea area around Japan, ocean surveys were carried out to acquire fundamental data required for development of a technology to evaluate CO2 separation capability of ocean, and for development of a technology to forecast environmental effect. In addition, using the western part of the Pacific Ocean as the object, development was performed on a numerical model to forecast behavior of CO2 in ocean in the scale of several ten years to several hundred years, and evaluate capability of CO2 separation from atmosphere. The research and development items for the current fiscal year are as follows: (1) ocean surveys, (2) model development, and (3) surveys and studies required for the ocean surveys and experiments. The survey voyage for item (1) was executed centering on the courses of traverse on 140 degree line of east longitude and 147 degree line of east longitude. The voyage surveyed densities of sea water, such data as chemical tracers, discharged mid-layer neutral buoys, carbonic acid based substances, marine living organisms, and sedimentary particles. For item (2), trial calculations were performed by using an inverse model to estimate structures of ocean flows, and discussions were given to enhance the accuracy. For item (3), design and fabrication were carried out on an equipment to experiment on-site dissolution of calcium carbonate, and a chamber for on-site experiments at deep sea bottom. (NEDO)

Numerical prediction with `DMDF` model of pack ice motion in the Okhotsk sea; DMDF model ni yoru Okhotsk kai ryuhyo undo no suchi yosoku

Energy Technology Data Exchange (ETDEWEB)

Matsuzawa, T.; Yamaguchi, H.; Suzuki, S.; Kato, H. [The University of Tokyo (Japan); Rheem, C. [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science

1996-12-31

A simulation was performed on pack ice motion in the Okhotsk Sea in winter by using the distributed mass/discrete floe (DMDF) method that carries out a dynamic numerical calculation of pack ice motion. Several kinds of cases were compared and calculated. As a result, effectiveness was verified on a DMDF model with boundary conditions which are relatively large in range and complex in nature. At the same time, it was possible to estimate part of the characteristics of pack ice motion in this sea area. The numerical calculation used the floe distribution on February 1, 1994 as the initial condition, and performed calculations on conditions until February 8 giving considerations on meteorological and hydrographic data. As a result, the calculation result showed the same movements as those in the observed ice conditions. If an ocean current is hypothesized steady, the calculation is affected more than necessarily by the ocean current, and it derives a result departed from reality. From these findings, it was elucidated that floe motions are governed mainly by wind; and in making a numerical modeling, a consideration including composition with the ocean current is necessary. Shear stress of wind has its acting direction displaced from the wind direction because of effect of the Corioli`s force. 6 refs., 13 figs., 2 tabs.

Fiscal 2000 report of investigation. International cooperative investigation on method for rationalizing use of energy; 2000 nendo energy shiyo gorika shuho kokusai kyoryoku chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

An investigative research was conducted for the purpose of building a database for LCA (life cycle assessment) that will be commonly used in Asian countries and developing an applicable environmental assessment methodology, with the fiscal 2000 results compiled. This year, joint researches and investigations were carried out with four countries, namely, Konkuk University (Korea), Taiwan Environmental Management Association (Taiwan), Universiti Putra Malaysia (Malaysia), and Thailand Environmental Institute (Thailand). The investigation covered the status how LCA problems were dealt with and how LCA infrastructures were built in the four countries. In the construction of the database for LCA, methods of preparing the LCA inventory database and their results were investigated concerning electrical power systems and production of basic materials (steel products), which were most important in implementing LCA in particular. In Thailand and Malaysia, lack of data for LCA was presumed; hence, necessary data sources were examined. Further, investigated also were the state of importing subterranean resources such as coal, oil, natural gas and iron ore, and the resource material flow or the like in each country. (NEDO)

Evaluation on the effect of tsunami and seaquake on the floating structure; Tsunami kaishin no futai ni taisuru eikyo hyoka

Energy Technology Data Exchange (ETDEWEB)

Yoshida, K; Suzuki, H; Hosomi, I [The University of Tokyo, Tokyo (Japan); Nahata, H [The Long-Term Credit Bank of Japan, Ltd., Tokyo (Japan)

1997-12-31

The effects of tsunami and seaquake on large floating structures are theoretically studied, where these effects are followed in terms of local strength using the equation proposed by Sells to predict surface shapes changed by seaquake-caused uplift of the seabottom. The equation is combined with the one for tsunami propagation, to better predict the tsunami motion. The simulation results indicate the necessity of considering the effects of tsunami for the design of a large floating structure. The authors discuss that the effect of tsunami is minimized when a floating structure is set at a depth of at least 40 to 50m, chain length should be determined by equalizing the breaking weight with the load at which the structure starts to move, and a structure should be set at a position where it is not attacked by transverse waves. They also discuss that seaquake intensity should be predicted by the equation of motion of compressible fluid, and, noting local strength of a floating structure, it will not be damaged when it is at least 16mm thick under the conditions of 2m as seabottom uplift and 0.5m as draft depth. 15 refs., 9 figs., 2 tabs.

Study on the effect of micro-gravity on bio-functions; Seitai kino eno bisho juryoku no eikyo ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The effect of micro-gravity on bio-functions and vital reaction was studied using the facility of Underground Gravity-free Experiment Center Co. On the effect on osteoblast shape and gene expression, although fluorochrome reacting with Ca was well taken into cells, no significant difference in Ca content in cells was observed before/after falling. Expression of genes related to cell propagation was controlled under micro-gravity. Protoplast fusion of Lentinus was unaffected by micro-gravity. The mRNA fragments of gravity sensitive mutant of rice plant were affected by micro-gravity. Paramecium was set swimming in solutions with different specific gravities. The reaction behavior of Paramecium was affected by the difference in specific gravity between cell bodies and solutions. The water content metabolism functions of a mouse with needle stimulus, in particular excretory, were slightly promoted by micro- gravity. The cortisol level in blood of a falling mouse group rose showing strong stress. As the preliminary study on the geotaxis of insects, motion of bagworm was observed. 12 refs., 38 figs., 4 tabs.

Influence of spectral solar radiation to the generating power of photovoltaic module; Taiyo denchi shutsuryoku eno taiyoko supekutoru eno eikyo

Energy Technology Data Exchange (ETDEWEB)

Minaki, S.; Ishihara, Y.; Todaka, T.; Harada, K. [Doshisha University, Kyoto (Japan); Oshiro, T.; Nakamura, H. [Japan quality Assurance Organization, Tokyo (Japan)

1997-11-25

As to the influence of spectral solar radiation to generating power of solar cells, a study was conducted from the aspects of season, time zone, intensity of solar radiation, etc. In the study, spectral responsive variation correction coefficients were introduced as evaluation values expressing the influence of spectral solar radiation. For the spectral distribution, an all sky spectral pyranometer by wavelength was used, and data were used which were obtained in the measurement in experimental facilities of the solar techno center. Concerning solar cell relative spectral sensitivity values, used were relative spectral sensitivity values of monocrystal and amorphous standard solar cells to the short-circuit current. Spectral response variation correction coefficients are coefficients correcting variations in conversion efficiency of solar cells due to changes in the spectral distribution. The changes of spectral responsive variation correction coefficients were studied using data obtained during April 1994 and March 1996. As a result, it was found that the coefficients showed large changes in summer and small ones in winter and that amorphous solar cells indicate this trend conspicuously. 3 refs., 6 figs., 3 tabs.

Evaluation on the effect of tsunami and seaquake on the floating structure; Tsunami kaishin no futai ni taisuru eikyo hyoka

Energy Technology Data Exchange (ETDEWEB)

Yoshida, K.; Suzuki, H.; Hosomi, I. [The University of Tokyo, Tokyo (Japan); Nahata, H. [The Long-Term Credit Bank of Japan, Ltd., Tokyo (Japan)

1996-12-31

The effects of tsunami and seaquake on large floating structures are theoretically studied, where these effects are followed in terms of local strength using the equation proposed by Sells to predict surface shapes changed by seaquake-caused uplift of the seabottom. The equation is combined with the one for tsunami propagation, to better predict the tsunami motion. The simulation results indicate the necessity of considering the effects of tsunami for the design of a large floating structure. The authors discuss that the effect of tsunami is minimized when a floating structure is set at a depth of at least 40 to 50m, chain length should be determined by equalizing the breaking weight with the load at which the structure starts to move, and a structure should be set at a position where it is not attacked by transverse waves. They also discuss that seaquake intensity should be predicted by the equation of motion of compressible fluid, and, noting local strength of a floating structure, it will not be damaged when it is at least 16mm thick under the conditions of 2m as seabottom uplift and 0.5m as draft depth. 15 refs., 9 figs., 2 tabs.

Assessment of global environmental impacts by utilizing methodology of LCA on solar water heater for dwellings; LCA shuho ni yoru taiyonetsu onsuiki no kankyo fuka hyoka

Energy Technology Data Exchange (ETDEWEB)

Kamoshida, J [Shibaura Institute of Technology, Tokyo (Japan); Asai, S [Yazaki Corp., Tokyo (Japan)

1997-11-25

CO2 emission was quantified through the life cycle of a solar water heater to assess its environment impact. Although LCA (life cycle assessment) originally sums up I/O of all materials and energy through the whole life cycle of a product to examine environment impact, this assessment was carried out for only CO2. Calculation of CO2 emission assumed a natural circulating solar water heater of 200 l in effective hot water capacity, 2.78m{sup 2} in effective collecting area, and 0.5 in average annual collecting efficiency of total solar radiation, and an auxiliary city gas heat source for compensating insufficient heat quantity. The total CO2 emission in the life cycle of a solar water heater was obtained from an industrial association table assuming the life cycles of 10 and 20 years. CO2 emission was estimated to be 5407.1kg-CO2 and 10665.2kg-CO2 for 10 and 20 years, respectively. CO2 emission due to city gas was largest in the total CO2 emission in the life cycle. As a result, for reduction of CO2 emission due to a solar water heater, improvement of equipment efficiency was most important. 6 refs., 5 figs., 3 tabs.

Fiscal 1992 report on geothermal development promotion survey (Development of geothermal reservoir assessment technique); 1989 nendo chinetsu kaihatsu sokushin chosa (Chinetsu choryusou hyoka shuho kaihatsu hokokusho)

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

Efforts were exerted in fiscal 1984-1992 to develop techniques for appropriately assessing a geothermal reservoir for its productivity for duly predicting the optimum scale of power generation to be provided thereby. In the development of simulators, geothermal reservoir simulators (SING-1, -2, -3) and a geothermal well 2-phase flow simulator (WENG) were developed. As for the treatment of fractures in a reservoir and of substances soluble in the hot water, the methods for dealing with them were improved and augmented. In a model field study in a Hokkaido forest, reservoir pressure continuous observation and monitoring, temperature logging and pressure logging for existing wells, and geothermal fluid chemical analysis were performed for reservoir analysis, in which both natural state simulation and history mapping excellently reproduced the temperature and pressure distributions. The temperature and pressure distributions in a natural state simulation, out of the results of an analysis of the Oguni district model field, Kumamoto Prefecture, agreed not only with those in the natural state but also with the pressure transition data in the observation well. (NEDO)

Effect of heat treatment changes on swelling treatment of coal; Sekitan no bojun shori sayo ni oyobosu netsushori henka no eikyo

Energy Technology Data Exchange (ETDEWEB)

Satsuka, T.; Mashimo, K.; Wainai, T. [Nihon University, Tokyo (Japan). College of Science and Technology

1996-10-28

Discussions were given on effects of heat treatment at relatively low temperatures as a pretreatment for coal liquefaction on coal swelling and hydrogenolysis reaction. Taiheiyo coal was heated to 200{degree}C for one hour as a pretreatment. The attempted heating methods consisted of four steps of rapid heating (6.7{degree}C/min)quenching (20{degree}C/min), rapid heating/natural cooling (0.7{degree}C/min), heating (1.0{degree}C/min)/quenching, and heating/natural cooling. The swelling treatment was composed of adding methanol benzene into heat treated coal, and leaving it at room temperature for 24 hours. The hydrogenolysis was carried out by using a tetralin solvent and at an initial hydrogen pressure of 20 kg/cm{sup 2} and a temperature of 350{degree}C and for a time of one hour. Hydrogenolysis conversion in the heat treated coal was found lower than that of the original coal because of generation of liquefaction inactive components due to thermal polymerization. When the heat treated coal is swollen by using the solvent, gas yield from the hydrogenolysis reaction decreased due to gas suppression effect, and the conversion was lower than that of the original coal. Heat treatment suggests densification of the coal structure. Swollen coal shows no conspicuous difference in the heat treatment methods against the hydrogenolysis due to the swelling effect. 3 refs., 5 figs., 1 tab.

Effects of gasoline properties on exhaust emission and photochemical reactivity; Gasoline seijo ga haiki gas sosei, kokagaku hannosei ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Kumagai, R; Usui, K; Moriya, A; Sato, M; Nomura, T; Sue, H [Petroleum Energy Center, Advanced Technology and Research Institute, Tokyo (Japan)

1997-10-01

In order to investigate the effects of fuel properties on emissions, four passenger cars were tested under Japanese 11 and 10-15 modes using two series gasoline fuels. The test results suggest that the distillation property (T90) affects A/F ratio which in turn influences exhaust emissions. The results of regression analysis show that both ozone forming potential and air toxics are highly corrected with the composition of aromatic hydrocarbons in gasoline. 3 refs., 10 figs., 6 tabs.

Effects of MTBE blended diesel fuel on diesel combustion and emissions; MTBE kongo keiyu ga diesel nensho haiki ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Shundo, S; Yokota, H; Kakegawa, T [Hino Motors, Ltd., Tokyo (Japan)

1997-10-01

The effects of MTBE (Methyl-t-butyl ether) blended diesel fuel on diesel combustion and emissions were studied. In conventional diesel combustion, the testing mode was carried out in conformity with the Japanese 13 mode. Furthermore, this fuel was applied to a new combustion system (Homogeneous Charge Intelligent Multiple Injection). MTBE blended diesel fuel is more effective in the case of new combustion system and very low NOx, PM capability is suggested. 6 refs., 6 figs., 2 tabs.

Convenient methods for appreciating effects of acid rain on stone building materials; Sekizai ni taisuru sanseiu no eikyo hyokaho no kento

Energy Technology Data Exchange (ETDEWEB)

Katami, T.; Takahara, Y.; Nishikawa, H.; Kato, K. [Gifu Prefectural Health and Environmental Research Center, Gifu (Japan)

1996-05-10

A method to evaluate effects of acid rain has been investigated by exposing building marble plates at both outdoor and indoor sites and measuring lightness and roughness on the surface of plates. The lower pH of rain water fell, the more remarkable loss of lightness appeared in a short period on the surface of outdoor samples in one to three months exposure tests. As an appropriate negative correlation was shown between the lightness and the pH value, it was found that physical change of the plate surface can be estimated by using the lightness, optically measured value. For three to nine months indoor-exposure tests, difference of the lightness were quantitatively observed, but little differences of the roughness height were recognized among the different exposure sites. From the reduction of lightness on the marble plate surface exposed at outdoor and indoor sites, it was also found that damage levels of the marble plates were four to eleven times higher at outdoor sites by rain water than those at indoor sites by air pollutants, such as acid gases, in the ambient air. Thus, the optical method may be useful to evaluate damage levels of marble building materials caused by acid-rain water after exposing them for a relatively short period. 10 refs., 3 figs., 6 tabs.

Effect of oxygenated fuel on premixed lean diesel combustion; Kihaku yokongo diesel nensho ni oyobosu gansanso nenryo kongo keiyu no eikyo

Energy Technology Data Exchange (ETDEWEB)

Sasaki, S.; Miyamoto, T.; Harada, A.; Akagawa, H.; Tsujimura, K. [New ACE Institute Co. Ltd., Tokyo (Japan)

1998-05-01

Because injection timing in diesel engines is early in a premixed lean diesel combustion system using early fuel injection, ignition timing is determined by ignitability of the fuel used. The conventional diesel fuel, which has good ignitability, causes excessively early ignition, thus aggravating fuel consumption. In order to reduce cylinder temperature with an aim of delaying ignition timing to improve the fuel consumption, attempts are being made on using low cetane fuels to reduce CO2 gas supply or compression ratio, and to vary ignitability of the fuels. The present study investigated ignition timing control and properties of exhausts by mixing different types of oxygenated fuels into light oil. Mixing the oxygenated fuels into light oil proved that the ignition timing can be controlled, and mixing such low cetane fuels as ethanol and MTBE achieved improvement in fuel consumption. Trial use of the oxygenated fuels aggravated CO concentration, which is caused because the cylinder temperature was reduced. Numerical calculations suggest that use of fuels with faster evaporation speed and lower cetane number is effective in improving the fuel consumption and the exhausts. 12 refs., 9 figs., 2 tabs.

Effect of synthetic detergent and soap on the waste-water treatment. Gosei senzai oyobi sekken no haisui shori ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Inamori, Y. (national Institute for Environmental Studies, Tsukuba (Japan)); Takamatsu, Y. (University of Tsukuba, Tsukuba (Japan))

1993-05-01

This paper describes the effect of surfactants on purification capability and living life phases in the living life membrane method and the activated sludge method as biological waste water treatment methods. As a result of treating artificial waste water in an immersion hearth process of the living life membrane method, it was found that LAS added concentration at 50 mg/l or higher would not affect noticeably the quality of water treated under a steady-state operation, but that at 100 mg/l has aggravated the treated water quality by increasing COD. In the case of soaps, the COD in the treated water has aggravated when the added concentration is 70 mg/l or higher. The result of discussing the activated sludge process using urban sewage water indicated that COD in the treated water shows higher value for synthetic detergents than for soaps at the detergent added concentration of 140 mg/l or higher, having affected adversely the treated water quality. An activated sludge treatment process was operated to identify the effects of synthetic detergents and soaps on living life phases in the activated sludge and living life membranes. The result suggests that either the LAS added system or the soap added system presents no problems in a long-time aeration, while activated sludge aerated for the standard period of time has a possibility of abnormally proliferating filamentous microorganisms that can cause bulking in the soap system. 14 refs., 3 tabs.

Influence of smectites on resistivity of rocks and soils; Smectite nendo kobutsu ga ganseki dojo no hi teiko ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Takakura, S; Nishizawa, O; Aoki, M [Geological Survey of Japan, Tsukuba (Japan); Kozake, K [University of Tsukuba, Ibaraki (Japan)

1996-10-01

This paper illustrates the measurement results of resistivity for specimens including smectite clay minerals artificially synthesized, and also discusses the influence of smectites on resistivity. Three kinds of bentonites, i.e., KN-1, Kawasaki ore, and Kawasaki Sanhaku, were used for preparing smectites. The KN-1 is Na type smectite, the Kawasaki ore is Ca type smectite, and the Kawasaki Sanhaku is acid clay. It is well known that smectites lower the resistivity of rocks. However, the experimental results suggested that the degree of decreasing the resistivity depends on the kind of smectites. The effect of decreasing the resistivity by the KN-1 was much superior to the other smectites. For the KN-1, a thick electrical double layer was formed by Na ions in the interlayers, which resulted in the larger effect of decreasing the resistivity. Swelling capacity and cation exchange capacity (CEC) of the KN-1 were large, which agreed with the above mentioned consideration. Reversely, it was considered that smectites having larger effect of decreasing the resistivity exhibited larger swelling capacity and CEC. 4 refs., 3 figs.

Effect of PV module output power on module temperature; Taiyo denchi no shutsuryoku henka ga module hyomen ondo ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Hongo, T; Kitamura, A [Kansai Electric Power Co. Inc., Osaka (Japan); Igaki, K; Mizumoto, T [Kanden Kako Co. Inc., Osaka (Japan)

1996-10-27

Effect of the photovoltaic (PV) module output power variation on the module surface temperature has been investigated by field measurements. PV modules with capacity of 54 W were used for the temperature measurements. Three 2 kW-class PV systems were operated. T-type thermocouples were used for measuring temperatures. Measurement time intervals were 15 minutes, 30 minutes, 60 minutes, and 24 hours. Measurement period was between May 25, 1995 and June 25, 1996. The surface temperature increased during non-loaded PV output, and decreased during load-carrying PV output. Difference of the surface temperature between non-loaded PV output and load-carrying PV output was 3.5{degree}C at maximum through a year. The surface temperature was saturated within 30 minutes. When PV output was changed in 30 or 60 minutes interval, the variation of surface temperature was distinctly observed. When PV output was changed in 15 minutes interval, it was not observed distinctly. There was no difference of the surface temperatures during the time zones with less solar radiation, such as in the morning and evening, and at night. Except these time zones, difference of the surface temperatures was 3.5{degree}C at maximum. 4 figs.

Psychological influences for the driver by the changes of running circumstance; Jidosha no soko kankyo henka no driver eno shinriteki eikyo

Energy Technology Data Exchange (ETDEWEB)

Okura, S; Yokomori, M; Yamaguchi, S [Meijo University, Nagoya (Japan)

1997-10-01

A driver is influenced psychologically by the cars proceeding on the street and the cars parked on the shoulder which come into the front view. The traffic accidents are caused when these influences put a lot of stress on a driver. In this report, we study the relations between the road traffic condition on the streets and the highway and the driver`s psychological and psysiological responses by using the driver`s front view, sweating and pulse rate. 6 refs., 8 figs.

Advancing aging society and its effect on the residential use energy demand; Shintensuru koreika shakai to kateiyo energy juyo eno eikyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-07-01

The paper analyzed various factors regulating the energy demand in aged households and viewed the future residential use energy demand in the aging society. In Part 1, based on the family budget survey annual report, a study was made of the energy consumption situation of aged people and the trend of the future residential energy consumption. In Part 2, a study was conducted based on survey data on the U.K., France, Sweden and Denmark. In Western countries which are the developed countries of aging, the energy conservation policy effectively worked for the space heating demand which is highest of all, and factors of the energy consumption increase by aging were absorbed. However, since in Japan, aging is rapidly advancing and further there are relatively more factors which connect to an increase in energy consumption in aged households as compared with Western countries, it is thought that Japan is in a situation where the energy consumption increases more often, influenced by aged households. 91 refs., 130 figs., 41 tabs.

Evaluation of performance for solar house with Trombe wall. Part 5; Trombe hekishiki solar house no hyoka kenkyu (nichisekisan Trombe heki kyuhonetsuryo yosoku senzu no teian)

Energy Technology Data Exchange (ETDEWEB)

Yoshida, N [Nishimatsu Construction Co. Ltd., Kanagawa (Japan); Nakajima, Y [Kogakuin University, Tokyo (Japan); Watanabe, T [Tokyo Electric Power Service Co. Ltd., Tokyo (Japan); Abe, H [Ministry of Construction, Tokyo (Japan); Yamaga, K [Mitsubishi Estate Co. Ltd., Tokyo (Japan)

1996-10-27

A regression equation that can calculate the daily accumulated absorption heat of Trombe Wall was given, and the performance estimated chart of Trombe Wall in which the daily unit effect of Trombe Wall can be visually recognized was proposed. The absorption heat was multivariate-analyzed by two variables of solar radiation of that day and the previous day. The data obtained from simulation was used for analysis. The absorption heat was analyzed using the meteorological data at eight spots (Sapporo, Sendai, Niigata, Tokyo, Shizuoka, Kochi, Fukushima, and Kagoshima). In this case, the result of multivariate analysis almost coincided with the simulation result. A chart that predicts the absorption heat of Trombe Wall in eight cities from the daily accumulated global solar radiation of that day and the previous day was then created as the performance estimated chart of Trombe Wall. As a result, the solar radiation of that day little influences the absorption heat when the Trombe Wall increases in thickness. Conversely, the solar radiation of the previous day significantly influences the absorption heat. In future, an equivalent heat loss coefficient will be calculated from the performance estimated chart. 2 refs., 16 figs., 2 tabs.

Effect of mixture formation process of premixed lean diesel combustion. Study of the effect of mixture homogeneity on premixed lean diesel combustion in aid of numerical simulation; Yokongo diesel nensho ni okeru kongoki keisei katei no eikyo. Kongoki no kin`itsusei no eikyo to suchi simulation ni yoru kosatsu

Energy Technology Data Exchange (ETDEWEB)

Shimazaki, N; Miyamoto, T; Akagawa, H; Tsujimura, K

1997-10-01

NOx emission was extremely decreased by PREDIC (PREmixed lean DIesel Combustion) in which fuel was injected at very early stage of compression stroke and the combustion started at near the TDC by self ignition. We have considered that NOx reduction is caused the decrease of a region of stoichiometric mixture ratio by means of extremely early injection. Therefore the homogeneity is very important to decrease of NOx. In this study to investigate the effect of mixture homogeneity in the PREDIC, gaseous fuels (DME, CH4) were charged into the intake, by the combination of direct fuel injection, the mixture heterogeneity was positively changed. In addition the mixture formation process is shown in aid of numerical simulation, it is observed that the homogeneous has the advantage of low NOx emission in PREDIC region. 9 refs., 10 figs., 1 tab.

International symposium on environmental impacts of advanced alternative to CFC; CFC shinki daitai busshitsu no kankyo eikyo ni kansuru kokusai symposium hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-07

The international symposium on environmental effects of new CFC substitutes was held in Tsukuba City, Ibaraki Pref. on February 7-9, 1996, and 19 papers were made public. In Session 1 (Plenary lecture), reports were made on Global warming and climate change: a review of recent studies; Stratospheric ozone, CFCs, and CFC-substitutes: an update, etc. In Session 2, Measurements of OH rate constants for advanced refrigerants as well as HCFCs and HFCs; The reaction rate of CFC alternatives with OH radical; Experimental and estimated rate constants: reactions of hydroxyl radicals with several halocarbons, etc. In Session 3, Measurement of uptake coefficients of some acetyl halides and fluorinated ethers into water; Mass transfer at the air/water interface: removal processes of halocarbonyl compounds; Heterogeneous reactions of fluorinated ethers on allophane or titanium dioxide, etc. In Session 4, papers were reported on model calculations relating to the global warming.

Influence of molybdenum on hardenability of destabilized high chromium cast irons. Ko kuromu chutetsu no netsushori tokusei ni oyobosu moribuden no eikyo

Energy Technology Data Exchange (ETDEWEB)

Kuwano, M. (Ube, Collete of Technology, Yamaguchi (Japan)); Ogi, K. (Kyushu University, Fukuoka (Japan). Faculty of Engineering); Sawamoto, A. (Yamaguchi University, Yamaguchi (Japan))

1991-07-25

Alloy elements are added to compensate for reduction in hardenability of high chromium cast iron as a result of destabilization heat treatment. With the purpose of investigating the influence of the added elements, this paper describes investigations made on effects of Mo and destabilization heat treatment conditions on martensite transformation , eutectoid transformation and base hardness, using Fe-Cr-C-based alloy containing C at 1.6-3.6%, and Cr at 6.6-26%. The main results obtained are as follows: Mo and Cr had the distribution coefficient for initial crystal austenite is smaller than one and were microscopically segregated in the dendrite base; the solute element distribution in the base is homogenized as a result of the long-time destabilization heat treatment while the Cr and C concentrations reduce largely, and the Mo concentration increases slightly; Mo has little influence on the Ms point, and reduces with the smaller the Cr/C ratio and the higher the retention temperature; and the base hardness corresponds well to a CCT diagram. 14 refs., 11 figs., 1 tab.

Effects of fuel properties and oxidation catalyst on diesel exhaust emissions; Keiyu seijo oyobi sanka shokubai no diesel haishutsu gas eno eikyo

Energy Technology Data Exchange (ETDEWEB)

Aihara, S; Morihisa, H; Tamanouchi, M; Araki, H; Yamada, S [Petroleum Energy Center, Advanced Technology and Research Institute, Tokyo (Japan)

1997-10-01

Effects of fuel properties (T90 and Poly-Aromatic Hydrocarbons: PAH) and oxidation catalyst on diesel exhaust emissions were studied using three DI diesel engines and two diesel passenger cars. (IDI engine) PM emissions were found to increase as T90 and PAH increased and could be decreased considerably for each fuel if an oxidation catalyst was installed. 5 refs., 9 figs., 3 tabs.

Influence of flow force on the flapper of a water hydraulic servovalve; Suiatsu servo ben no flapper ni sayosuru ryutairyoku no eikyo

Energy Technology Data Exchange (ETDEWEB)

Urata, E. [Kanagawa University, Kanagawa (Japan). Faculty of Engineering; Yamashina, C. [Ebara Research Co. Ltd., Kanagawa (Japan)

1997-06-25

In this paper flow force due to nozzle flow and its influence on the flapper-nozzle system for water hydraulic servovalves are discussed. The flow force acting on the flapper is estimated using the momentum theory, and expressed as a function of the nozzle pressure and flapper-nozzle gap. Analysis shows that the double nozzle flapper gives a quasilinear characteristic to the relationship between the force on the flapper, the flapper gap and the spool velocity. The numerical result based on the theory is used to estimate accuracy of the classical linear approximation. The flow force reduces the magnitude of the change of the nozzle back pressures which drive the spool of the water hydraulic valve, because the input moment acting on the armature is resisted by the moment due to the flow force. Experimental verification of the theory is also given. 7 refs., 10 figs., 1 tab.

Effects of ferrous ions on the metabolism of sulfate-reducing bacteria; Ryusan`en kangenkin no taisha ni oyobosu tetsu ion no eikyo

Energy Technology Data Exchange (ETDEWEB)

Baba, F.; Suzuki, T. [Ajinomoto Co. Inc., Tokyo (Japan). Technology and Engineering Lab.]: Seo, M. [Hokkaido Univ., Sapporo (Japan). Graduate School

1995-11-15

The grave damages due to microorganisms occur occasionally to the ironic piping and the like when river water is used as industrial water. In the present researches, the effects of Fe{sup 2+} on the amount and activity of sulfate-reducing bacteria in the culture medium with the concentration of Fe{sup 2+} changed by stages from 3.6{times}10{sup -4} M to 0.7M are examined. Further, the relations between the activity of the bacteria and the amount of FeS generated in the medium are investigated as an in-site means to observe the activity of the bacteria in the medium wherein the produced S{sup 2-} is converted into FeS once it is generated. The following conclusions are drawn therefrom. In the initial medium with the Fe{sup 2+} concentration from 3.6{times}10{sup -4} M to 0.7M, the growth of the bacteria is maximum at the concentration of 1.0{times}10{sup -2}. Over this concentration the growth is weakened due to the osmotic pressure, lowering of nutriment and the deposit of waste, and the bacteria are extirpated due to the direct effect of osmotic press when the concentration is 0.7M. The total amount of FeS produced due to the bacteria is in conformity with the tendency of growth of bacteria till 30 hours of culture. 18 refs., 6 figs., 2 tabs.

Emission characteristics of multiple stage diesel combustion. Effect of exhaust gas recirculation; Nidan nensho diesel kikan no haishutsubutsu tokusei. EGR no eikyo

Energy Technology Data Exchange (ETDEWEB)

Hashizume, T.; Miyamoto, T.; Akagawa, H.; Tsujimura, K. [New A.C.E. Institute Co. Ltd., Tokyo (Japan)

1998-05-01

For an aim to reduce NOx emission from diesel engines, it has become possible to realize it with smoke emission maintained at low levels by taking the following steps: initial combustion is carried out as lean pre-mixed combustion by adopting early fuel injection; the fuel is injected again after completion of this combustion; and EGR is combined with two-stage combustion which performs diffusion combustion under high temperature atmosphere. When a large quantity of EGR is used, cylinder temperature drops to have ignition timing delayed in the first stage, serving for improving fuel consumption. The problem of increase in smoke generation is solved by optimizing the injection timing at the second stage to suppress smoke generation increase, resulting in realization of lower NOx emission. By completing the second-stage fuel injection before ignition of the first-stage injection, it was possible to realize further lower NOx emission. Smoke increase due to higher EGR ratio was suppressed by pre-mixing both fuels injected in the first and second stages, although this is a high load operation. In addition, oxygen concentration and cylinder temperature were reduced, the gas pre-mixture was homogenized, and combustion velocity was suppressed by delaying the angle of ignition timing. This made low smoke combustion at {lambda} = 1 possible even in compressed ignition combustion. 8 refs., 12 figs., 1 tab.

Global environment assessment survey by advancing the energy demand and supply structure. 4; Energy jukyu kozo kodoka chikyu kankyo eikyo chosa. 4

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

To investigate the energy demand and supply structure in Japan, the international trend of approaches to global warming problems and the mitigation options to global warming in the energy related sectors have been surveyed. For the United Nations Framework Convention on Climate Change, an Ad-hoc Group has discussed relevant topics after the 1st conference of the Parties. Meetings of the Group primarily focused on what objectives to set for the reduction of greenhouse gas (GHG) emissions in and in and after 2000. IPCC completed their Technical Paper in November 1996 in which technologies and measures to reduce GHG emissions and to enhance GHG sinks were analyzed and evaluated in various aspects. This Paper discusses about each sector of institutional buildings sector, transport sector, industrial sector, and energy supply sector. Especially, in the energy supply sector, promising approaches to reduce future emission include more efficient conversion of fossil fuels, switching to low-carbon fossil fuels, decarbonization of flue gas and fuels, CO2 storage, switching to nuclear energy, and switching to renewable sources of energy. 5 refs., 2 figs., 14 tabs.

Study of effects of engine oil additives on the properties of fluorelastomers; Fusso gomu ni oyobosu engine yu tenkazai no eikyo chosa

Energy Technology Data Exchange (ETDEWEB)

Kurono, K; Owaki, M; Suzuki, Y; Akiyama, K; Shionoya, M [Toyota Motor Corp., Aichi (Japan)

1997-10-01

Fluoroelastmers are well known for their resistance to heat and fluids and have become major material for crankcase oil sealers. On the other hand new additive formulations are developed for engine lubricants used for fuel economic gasoline engines. In this paper the effects of those additives on properties of fluoroelastmers are investigated. The results of the immersion tests of both test plaques and oil sealer products indicates that dithiocarbamates friction modifier have hardening effects on fluoroelastomers. The fluoroelastmer deterioration mechanism is presumed by analysis of elastmer samples after immersion in oil. 6 refs., 9 figs., 3 tabs.

Investigation into the analysis method of total ecobalance in chemical industry products. 3; Kagaku kogyo seihin ni okeru total eko balance no bunseki shuho ni kansuru chosa. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

For the purpose of establishing a total life-cycle ecobalance analysis (LCA) method, the paper studied making of a general computer program for chemical industry products. The study has been made on general-purpose plastics (PET/PSP (polystyrene paper)) since fiscal 1993 aiming at making the CO2 emission computing program covering the entire process of production from extraction of raw materials through waste disposal. In fiscal 1995, the following were conducted for enhancement of generalization of the method: expansion of environmental load items and increase in validity of the concept, and expansion of database. Notice was taken of not only CO2 but SOx, NOx and water quality load items. The survey was made on the recycling situation in Japan and abroad and the PET recycling plant , and environmental load item data are collected to expand database. The program was verified by analyzing an example of reusing PET bottle to carpet, and one-step development can be made toward the establishment of the method. Moreover, an analysis was made for the environmental assessment of the related programs abroad, and a tentative original plan can be proposed for the standardization of environmental load analysis and the integrated assessment method. 39 refs., 130 figs., 76 tabs.

Development of more effective methods of normalization and application at braking in turn test; Senkai seido shiken no koritsuka to oyo han`i no kakucho shuho no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Sekine, T; Nagae, H [Nihon University, Tokyo (Japan)

1997-10-01

Recant passenger cars have so higher grades of the cornering performance that the vehicle behaviors at braking in turn have become more important for the security on the obstacle avoidance ability. In this paper, the influences of amount of initial centripetal acceleration to braking motion of vehicles are discussed by experimental and theoretical analysis. Under the higher centripetal accelerations, even smaller deceleration bring the vehicle oscillating yaw velocity phenomena as same as centripetal accelerations. As to advance the effective test procedure. the authors proposed one of the methods that enable to reduce the test error by insufficient vehicle velocity. 7 refs., 6 figs., 1 tab.

Effect of oil around the pin boss bearing on bearing friction force; Piston pin jikuukebu kinbo no junkatsuyu ga masatsuryoku ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Takiguchi, M; Suhara, T; Ato, S; Someya, T [Musashi Institute of Technology, Tokyo (Japan)

1997-10-01

Piston pin bearings are engine parts placed under severe lubricating condition because of the high unit load and temperature and the low sliding speeds. Therefore, they are vulnerable to many lubrication problems such as abnormal wear, scuffs and seizures. In our recent study, the bearing friction were measured using a original measuring device and it was found out that the lubricating conditions of piston pin boss bearings are non-fluid lubrication due to the oil starvation. In this study, we have also measured the lubricating oil behavior around the pin boss bearing using a special cylinder with glass window, and analyzed the relationship between the friction force and the oil behavior at the pin boss bearings in a actual operating gasoline engine. 2 refs., 9 figs., 1 tab.

Temperature effect on corrosion fatigue strength of coated ship structural steel; Zosen`yoko tosozai no fushoku hiro kyodo ni okeru ondo no eikyo

Energy Technology Data Exchange (ETDEWEB)

Takanashi, M.; Fuji, A.; Kojima, M.; Kitagawa, M. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan); Kobayashi, Y. [Ship Research Inst., Tokyo (Japan); Kumakura, Y.

1997-08-01

The corrosion fatigue life was obtained using uncoated and tar epoxy resin specimens to clarify the temperature effect. The life curve for corrosion fatigue of machined and uncoated steel in the air and sea was obtained. The fatigue strength of uncoated steel largely decreases in the sea and breaks even in the nominal stress range of less than 1/2 of the fatigue limit in the air. The effect of temperature on the coated steel is represented by a corrosion coefficient. The steel coated at 25{degree}C is 1/1.03 to 1/1.13 at 40 to 60{degree}C. This showed that the fatigue strength decreases when the temperature exceeds 25{degree}C. However, it has not such tendency and significance that are represented quantitatively. There is a slight difference in the short-life area between the crack generation life and breaking life. However, the long-life area has no significance that influences the whole evaluation. In the long-life corrosion fatigue, the crack occurs from the corrosion pit due to the exposure below the coated film and progresses in the base material before the coated film is destroyed. The effect of the corrosion pit remarkably appears at a low-stress level. 14 refs., 14 figs., 4 tabs.

Effect of Water Environment on Subcritical Crack Growth of Machinable Ceramics; Kaisakusei seramikkusu no kiretsu shinten tokusei ni oyobosu mizu kankyo no eikyo

Energy Technology Data Exchange (ETDEWEB)

Ikeda, K.; Kaizu, K.; Inotani, T. [Miyazaki Univ., Miyazaki (Japan); Yoshikawa, A.; Adachi, K.; Igaki, H. [Osaka Sangyo Univ., Osaka (Japan)

1997-06-15

The fatigue behavior of ceramics has been discussed on the basis of the relation between stress intensity facter (KI) and crack velocity (V). In this paper, the effect of environment on the relation between KI and V was studied on machinable ceramics (mica glass ceramics) and two kinds of glass ceramics with different grain sizes. The double torsion (DT) technique was used for the determination of the KI-V characteristics under different environments of air and ion-exchanged water. The characteristics of acoustic emission (AE) during stress corrosion cracking of mica glass ceramics was also examined. In water environment, the region II in the KI-V curve, in which crack velocity varies slowly with KI, disappeared. From this experimental fact, it was considered that at high KI, the crack velocity is encouraged by diffusion of the corrosive species to the crack and thus depended on the amount of water. SEM farc tography revealed that mica single crystals in the material caused crack arrest and deflection to occur. It is also found that AE event rate is quantitatively related to the crack velocity. AE measurement can be used in studying the crack propagation behavior of mica glass ceramics. 11 refs., 12 figs., 3 tabs.

Fiscal 1998 research report on the global environmental assessment for efficient energy consumption; 1998 nendo energy shohi koritsuka chikyu kankyo eikyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

International Panel on Climate Change (IPCC) published the 1st assessment report in 1990 and the 2nd report in 1995 since its establishment in 1988, and is promoting the 3rd research and analysis. Among them, this report describes the study on technology transfer for efficient energy consumption. For stabilizing greenhouse effect gas concentrations in the air, strong control of such gas emission is indispensable, and a role of technology is important for the control. For overcoming some weak points for climate change, practical use of applicable technologies is necessary over a certain period of time, and technology transfer is essential in each country and all over the world. For promotion of such approach, the analysis and evaluation for technology transfer and diffusion are useful in addition to reports on technology itself. Based on such understanding, IPCC has promoted preparation of the special report on methodological and technological issues of technology transfer since 1997. Its approval at the IPCC general meeting is expected in late 1999 or early 2000. Some chapters related to efficient energy consumption are presented. (NEDO)

Effects of electrical stimulation on fruit of lentinus edodes; Shiitake jinko kindoko ni taisuru denki shigeki ga kojittai hassei kosu ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Mitobe, K.; Sato, T.; Yoshimura, N. [Akita Univ. (Japan)] Suzuki, T. [Tohoku Electric Power Co. Ltd., Sendai (Japan)

1997-11-30

So far, the cultivation of Lentinus edodes is cultivated from material wood mainly, however, recently, artificial bed-blocks method has been used widely. The advantage of bed-block cultivation is to a short growing period and be possible to cultivate by a large scale facilities. Hereafter, it is thought that this growing method is used mainly. Before now, based on the experimental fact that abnormal fruiting of Lentinus edodes occurs due to lightening, the study on the effects of electrical stimulation was reported, however, the investigation on the effects of electrical stimulation on the artificial bed-bocks which is thought to come into wide use in future does not carry out until now. The purpose of this study is to investigate an increased yield of the Lentinus fruit-bodies grown on artificial bed-blocks that electrical stimuli were applied. Nineteen artificial bed-blocks were provided for each applied voltage condition; Control, 200V, 400V, 600V, for the AC. As a result of experiment, in the 600V condition, the total number of fruiting of Lentinus edodes was significantly increased as compared with other conditions. Especially, in the artificial bed-blocks that peak current was over 300 mA, the total number of fruiting was increased. 6 refs., 6figs.

Report on the survey made under the research contract with NEDO, `The International Work Division/Energy Demand Effect Survey.`. Influence of the economic growth in Asia on the energy demand; 1996 nendo `kokusai suihei bungyo energy juyo eikyo chosa` itaku chosa kekka hokokusho. Asia no keizai hatten ga energy juyo ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This report includes surveys on the following: (1) the progress situation of the Asian information society, (2) changes of corporate network, business flow, material flow and money flow in association with the information society, (3) the present situation of the industry-accumulated region in Asia and inter-region network, (4) impacts of the above-mentioned changes on the trade and investment structure in Japan, (5) how to tackle the energy issue in Asia in the future. First, effects of the advance of the information society on energy supply/demand were studied. Next, an analysis was made of effects of the progress of the high-grade information society in Asia on economy, industry and corporate action. The degree of the progress of the information society in Asian countries was made clear from the infrastructure arrangement and the developmental status of application. Contribution of the financial network to the economic growth in Asia and the development were clarified. The organization of corporate networks in Asia where paradigms are converting was made clear to consider industrial clusters in Asia. Last, in the light of the economic relationship between Japan and Asia, a study was made on the future policy of Japan for Asia. 238 refs., 77 figs., 89 tabs.

Fiscal 1999 survey report. Survey of effect of energy efficiency improvement on global environment; 1999 nendo energy shohi koritsuka chikyu kankyo eikyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Analyses are conducted into consideration given to global warming measures in the 3rd assessment report of the Intergovernmental Panel on Climate Change (IPCC) and into technology transfer from developed nations to developing nations in the Asia-Pacific region etc. to contribute to their energy efficiency improvement. The aim is to present data for deliberation as to how future energy efficiency improvement measures should be in the Asia-Pacific region. The chapters (Chapter 0 through Chapter 10) of the report to be worked out by Working Group III deeply involved in energy problems are 0) Introduction, 1) Scope of the report; 2) Socio-economic and emissions scenarios; 3) Technical and economic potential of GHG (greenhouse gas) emissions reduction; 4) Technical and economic potential of biological CO2 mitigation options; 5) Barriers, opportunities and market potential of technologies and practices; 6) Policies, measures and instruments; 7) Costing methodologies; 8) Global, regional and national costs and ancillary benefits of mitigation; 9) Sector costs and ancillary benefits of mitigation; and 10) Decision making frameworks. As the result of the survey, some actual technology transfer implementations are introduced covering branches closely related to energy efficiency improvement, which are branches of construction, traffic, industry, energy supply, and wastes. (NEDO)

Effects of lithium iodide doping on devolatilization characteristics of brown coals; Yoka lithium no tenka ga kattan no kanetsu henka katei ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Muraoka, J.; Kumagai, H.; Hayashi, J.; Chiba, T. [Hokkaido University, Sapporo (Japan)

1996-10-28

In order to discuss effects of lithium iodide (LiI) doping on condensation structure of brown coals during heating, spectral changes were measured by using an in-situ FT-IR. It was found that the LiI doping accelerates weight reduction due to heating, and the doping effect is affected by coal structure. Both of Loy Yang (LY) coal and its LiI doped coal (DLY) had absorption intensity of the FT-IR spectra decreased with rising temperature, and the absorption center belonging to an OH group shows different shifts between the LY and DLY coals. This indicates that the LiI doping has affected the change in hydrogen bonding patterns associated with heating. Both of South Banko (SB) and LY coals had the absorption spectral intensity in the OH group decreased as the weight reduction (conversion) rate increased. Reduction in the OH groups associated with heating is caused by volatilization and condensation reaction in light-gravity fraction. However, in the case of equal conversion rate, the LiI doped coal shows higher spectral intensity than the original coal, with the LiI doping suppressing reduction in the OH groups. It appears that the doping suppresses the condensation reaction between the OH groups. 2 refs., 6 figs., 1 tab.

Influence of frequency spectra to annoyance caused by road traffic noise; Doro kotsu soon no urusasa ni oyobosu shuhasu supekutoru no eikyo ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Ishiyama, T [Japan Automobile Research Institute Inc., Tsukuba (Japan); Hashimoto, T [Seikei University, Tokyo (Japan)

1997-10-01

This paper describes a study of annoyance to road traffic noise in laboratories. To measure the annoyance to road traffic noise, subjective evaluation test was carried out using 48 road traffic noise recorded at various points in the city. Among the frequency spectra of these noise, the differences on the SPL of high frequency component were significant. As a result, we found that: (1) annoyance was different while A-weighted SPLs were the same, (2) fluctuation strength had the highest correlation with annoyance, (3) besides A-weighted SPL, roughness and sharpness contributed to annoyance -simultaneously, (4) contribution of high frequency noise was significant to annoyance. 2 refs., 11 figs., 1 tab.

Effect of low oxygen partial pressure to the bumblebee respiration; Naruhanabachi ni okeru taikichu sanso bun'atsu henka no kokyu ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Komai, Y. [Japan Science and Technology Corp., Tokyo (Japan)

1999-06-25

Insects augment oxygen supply using convective transport during flight in two ways: with deforming tracheae by surrounding muscles movement (muscle pumping) and with contracting air sacs by exoskeleton movement (abdominal or thoracic pumping). However, because induced flow inside tracheae is difficult to measure, it is not known how the convective transport actually contributes. By comparison between direct measurement of oxygen partial pressure in a flight muscle based on electrochemical method and flight/ventilation activities in a bumblebee, Bumbus hypocrita hypocruta, a method was developed for estimating gas transport efficiency. Oxygen partial pressure, P{sub 02}, in the bee periodically fluctuated with discontinuous abdominal movement in normal air. While the P{sub 02} strongly varied among individuals in normal air, the P{sub 02} took a unique value in oxygen poor air ({<=}8%). By enhancing ventilation, the bee could respire in an oxygen poor atmosphere up to 2%. Furthermore, the bee could fly in an atmosphere of 6%, in which the P{sub 02} decreased to 0.7%. Estimated efficiency of the gas transport increases with atmospheric oxygen concentration decreases. (author)

Study on the performance improvement of multiblade fans. Effects of suction cones; Tayoku fan no seino kaizen ni kansuru kenkyu. Suction cone no eikyo

Energy Technology Data Exchange (ETDEWEB)

Kuratani, F.; Ogawa, T. [Hyogo University of Teacher Education, Hyogo (Japan); Yamamoto, S.

1999-07-25

In order to improve the performance of a multiblade fan, the effects of three types of suction cones of the fan casing on the fan efficiency and noise are investigated experimentally. The first type of the suction cone is the insertion type, which is inserted into the inside of the fan impeller. The second type is the extrusion type, which extrudes outside from the casing surface. The third type is the combination type of two types. The results of those three types are compared with those of the commonly used suction cone. The followings are made clear: (1) The insertion type and the extrusion type are effective in improving the efficiency and reducing noise. (2) The optimal lengths of the insertion and the extrusion exist. (3) The combination type is more effective in improving the efficiency. (4) The combination type with the skewed cutoff of the fan casing shows the best effect. (author)

Study on the effect of measurement points upon reduced added mass matrix; Shukusho fuka shitsuryo matrix ni okeru kansokuten no eikyo ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Funaki, T.; Hayashi, S. [Osaka University, Osaka (Japan). Faculty of engineering

1996-12-31

It is known in estimating vibration characteristics of a ship that fluid range affects largely a structure. A parameter calculation was performed on node vibration in the vertical direction of a rotating elliptic body such as a ship to investigate the effect of an arranging method of the measurement points upon the result of the analysis. As a result, it is thought that equivalent interval arrangement of 21 measurement points would be sufficient in a lower order side mode of vibrations with less than four nodes. An analysis of calculations performed by arranging measurement points in experimental measurement points revealed that analysis accuracy would not increase even if the number of measurement points is increased if it is done so without considering rotation vector. An experiment was carried out with the number of measurement points increased to verify the above fact, with which the analysis was verified correct. Therefore, as has been forecasted in the previous report, the cause for the analysis accuracy deterioration in a high order mode may be estimated as the effect of the rotation vector. However, since it is not the situation that an analysis considering the rotation vector has been conducted, it cannot be concluded yet that the effect of the rotation vector is the sole cause. 4 refs., 14 figs., 7 tabs.

Economic development in India and the effect on the energy market in Asia; Indo no keizai hatten to Asia no energy shijo eno eikyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-07-01

As for the real GDP growth rate in India, the real GDP per capita during 1980-1993 increased 2.9% on annual average, but that in China did 8.0%. India has largely been behind China in the economic growth, but since the liberalization of economy in 1991, the Indian economy has remarkably been developed. It is predicted that the real GDP during 1993-2010 will be 5-6% on annual average. The difference in GDP increase between India and China is caused by differences in energy conservation, speed of conversion from non-commercial energy to commercial energy, serviceability of the industrial structure, etc. It is predicted that the primary energy consumption will grow on the level of China. The oil demand will grow 4-6% in China and 5-6% in India in 1993-2010, showing more increase in India. For oil import to India to exceed 1 million B/D in 2000, it is necessary to clear the ceiling of the international balance. For India to become a big country corresponding to its population size, a lot of difficulties should be overcome. 49 refs., 104 figs., 62 tabs.

Study on the effect of measurement points upon reduced added mass matrix; Shukusho fuka shitsuryo matrix ni okeru kansokuten no eikyo ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Funaki, T; Hayashi, S [Osaka University, Osaka (Japan). Faculty of engineering

1997-12-31

It is known in estimating vibration characteristics of a ship that fluid range affects largely a structure. A parameter calculation was performed on node vibration in the vertical direction of a rotating elliptic body such as a ship to investigate the effect of an arranging method of the measurement points upon the result of the analysis. As a result, it is thought that equivalent interval arrangement of 21 measurement points would be sufficient in a lower order side mode of vibrations with less than four nodes. An analysis of calculations performed by arranging measurement points in experimental measurement points revealed that analysis accuracy would not increase even if the number of measurement points is increased if it is done so without considering rotation vector. An experiment was carried out with the number of measurement points increased to verify the above fact, with which the analysis was verified correct. Therefore, as has been forecasted in the previous report, the cause for the analysis accuracy deterioration in a high order mode may be estimated as the effect of the rotation vector. However, since it is not the situation that an analysis considering the rotation vector has been conducted, it cannot be concluded yet that the effect of the rotation vector is the sole cause. 4 refs., 14 figs., 7 tabs.

Measurement method of moving vehicle in the magnetic levitation and propulsion system using high-Tc superconducting bulks; Koon chodendo barukutai wo riyoshita fujo suishin shisutemu no suishin tokusei keisoku shuho

Energy Technology Data Exchange (ETDEWEB)

Fuwa, Y.; Mizuma, T.

1999-06-07

The transportation system using simple magnetic levitation system got in the combination of high-temperature superconductivity bulk body and permanent magnet, which caught a quantum magnetic flux, is devised in great numbers, and the model equipment has also been manufactured. In the meantime, a grasp of levitation and guide characteristics is necessary for the case in which this levitation system is applied to the simple individual transportation system, and the measurement of the levitation characteristics is indispensable for the reason. In the conventional research, the measurement of the levitation characteristics has not been very much made. There was due to be no technique which measured kinetic characteristics of noncontacting surfacing and running travel body. In this study, measuring method for measuring these levitation characteristics was devised, and it was applied to actual measurement by the production of the model test equipment. Through this measurement, the purpose of this study is to show with that it is applicable for the real test equipment as this measuring method judges possibility of application to simple transportation system. (NEDO)

Result of observation on winter lightning onto a wireless tower in a mountainous area along the Sea of Japan. Nihonkai engan no sangakuchi musento ni okeru toki kaminari yosoku kekka

Energy Technology Data Exchange (ETDEWEB)

Katsuragi, Y; Yamauchi, M; Shimizu, M [The Chubu Electric Power Co. Inc., Nagoya (Japan); Sakurano, H [Ishikawa College of Technology, Ishikawa (Japan)

1993-11-01

This paper reports the result of observing winter lightnings for three years using a wireless tower on the summit of Mt. Hotatsu in Ishikawa Prefecture (with an altitude of 637 m and a distance of about 8 km to the western seashore) as an observation site. Battery driven lightning surge memory devices were used to measure lightning current waveforms at different parts of the wireless tower and power distribution poles. An automatic stationary camera was used to photograph lightning paths to the wireless tower and a rain radar. The result of the observation may be summarized as follows: about half of the lightnings is of positive polarity and dual polarity; the lightning current having struck the wireless tower flows back into a power distribution pole through the ground; the ratio of lightning on the wireless tower to that on the power distribution pole is 3 to 1; the ratio of lightning on the lightning arrestor on the tower to that on the building is 3 to 7; half of the lightnings on the rain radar has struck directly the radome; and the back-flow ratio of lightning current onto the arrestor in the case of positive polarity is more than double that in the case of negative polarity. 7 refs., 22 figs., 11 tabs.

Utilization of statistical table for waves in North-west Pacific Ocean and a long-term estimation on hull responses; Seihoku Taiheiyo haro tokeihyo no riyo to sentai oto choki yosoku

Energy Technology Data Exchange (ETDEWEB)

Shinkai, A [Kyushu University, Fukuoka (Japan). Faculty of Engineering

1997-10-01

Designing a vessel to sail oceans for an extended period of time requires statistical estimation on different hull responses to waves. To meet the requirement, it is necessary to accurately identify hydrographic conditions (particularly waves) which are considered to be encountered by the vessel. This paper makes clear the statistical characteristics of the wave statistics table presented by Fang et al, and compares them with other processes for discussion. This statistics collection is based on data collected in China, Hong Kong and Japan, including those collected in the Sea of Japan, the Yellow Sea, the North Sea, the East China Sea and the South China Sea. It was found that these data provide results slightly lower than the long-term estimation values derived from data of the global wave statistics (GWS) prepared by Hogben et al. The cause for this was found attributable to the format of the statistical data, especially setting of wave height classes. However, since the data provided by Fang et al include items of detailed information on small sea areas near the Chinese coast lines, the data are thought to provide useful information source in investigating long-term hull response characteristics relative to spatial spread of the sea areas in the North-west Pacific Ocean. 15 refs., 5 figs., 2 tabs.

Effect of fuel composition on poly aromatic hydrocarbons in particulate matter from DI diesel engine; Particulate chu no PAH ni oyobosu nenryo sosei no eikyo

Energy Technology Data Exchange (ETDEWEB)

Tanaka, S; Tatani, T; Yoshida, H; Takizawa, H; Miyoshi, K; Ikebe, H [COSMO Research Institute, Tokyo (Japan)

1997-10-01

The effect of fuel composition on poly aromatic hydrocarbons (PAH) in particulate matter from DI diesel engine was investigated by using deeply desulfurized fuel and model fuel which properties are not interrelated. It was found that the deeply desulfurized fuel have effect on reducing PAH emissions. Furthermore, it was suggested that poly aromatics in the fuel affect PAH emissions and the influence of tri-aromatics in the fuel was promoted by the coexistence of mono-aromatics or naphthene. PAH formation scheme from each fuel component was proposed by chemical thermodynamic data. 4 refs., 8 figs., 3 tabs.

Economical effect of introducing a photovoltaic system on future electric power system; Shorai no denryoku keito eno taiyoko hatsuden system donyu ni yoru keizaiteki eikyo

Energy Technology Data Exchange (ETDEWEB)

Akata, N.; Kenmoku, Y.; Sakakibara, T. [Toyohashi University of Technology, Aichi (Japan); Kawamoto, T. [Shizuoka University, Shizuoka (Japan); Nakagawa, S. [Maizuru National College of Technology, Kyoto (Japan)

1997-11-25

Economic impact of introduction in the future of photovoltaic power generation (PV) systems into the commercial power system is discussed from the electric utilities` point of view. In the discussion, future demand for power is predicted from the demand for power in the base year, and the optimum power source configuration corresponding to the future demand and power generation curve are worked out by use of linear programming. Then, the fixed cost and variable cost are calculated for each of the power source components, and then the expected reduction in cost per unit of power generated is calculated. As the power sources, the hydroelectric, pumped storage, oil-fired, coal-fired, LNG-fired, combined cycle, and atomic technologies are considered. The conclusion is stated below. Upon introduction of PV power equivalent to 10% of the maximum demand power, the maximum power in the service area of Chubu Electric Power Co., Inc., will be reduced by 1.23GW in 2025, and the yearly demand power by 5472GWh. Since PV lowers the peak, an increased number of power sources low in variable cost will be used although such will be low in tracking capability. An increase in power demand will enhance the cost reducing effect of the PV system. 5 refs., 4 figs., 3 tabs.

Influence of hydrogen-ion concentration exponent on undrained shear behaviour of bentonites; Bentonaito no hihaisui sendan kyodo ni oyobosu suiso ion nodo shisu no eikyo

Energy Technology Data Exchange (ETDEWEB)

Kamei, T [Kiso Jiban Consultants Co. Ltd., Tokyo (Japan); Tokida, M [Nagano National College of Technology, Nagano (Japan)

1994-12-21

Because there is a report example that the yield stress of a landslide clay increases along with a decrease of a hydrogen-ion concentration exponent, it is thought that a shear strength of the landslide clay depends on the hydrogen-ion concentration exponent. Furthermore, when the soil stabilization method by lime is applied to the soft ground and high organic earth, it is pointed out that the hydrogen-ion concentration exponent will become one of the harmful factors. Accordingly, it is understood that revealing an influence of a hydrogen-ion concentration exponent affects on the characteristics of an earth is one of the important factors, to evaluate a strength, deformation and so forth of the viscous ground. In this study, in order to examine an influence of a hydrogen-ion concentration exponent affecting on an undrained shear behavior of the bentonites, for the artificially adjusted bentonite specimens with 5 kinds of different pH, the isotropic consolidated undrained triaxial compression tests were performed, and consequently an influence of pH affecting on the engineering characteristics of the bentonites was made clear quantitatively. 28 refs., 16 figs., 5 tabs.

Survey of effects of enhancement of the energy supply/demand structure on the global environment. 3; Energy jukyu kozo kodoka chikyu kankyo eikyo chosa. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

For the purpose of studying how the energy supply/demand structure in Japan should be, a report on the secondary IPCC (Intergovernmental Panel on Climate Change) evaluation was analyzed. Possibilities of reducing the world CO2 emissions in association with the energy consumption were studied in the five assumed cases. Every case says that CO2 can be reduced to 1/3 of the 1990 level by 2100. In a case of the use of biomass as main fuel (1), the use of primary energy is suppressed to two times the 1990 level, and photovoltaic/wind/biomass power generation is introduced in a large quantity. Synthetic methanol and hydrogen are used for transportation and commercial/residential use fuels. There are four more assumed cases: the use of nuclear power as a substitute for renewable energy in the power generation in (1), the use of natural gas of 1.5 times that used in (1), the substitution of coal for biomass used in (1), and the assumption that the demand for primary energy in 2100 will be twice that used in (1). In Japan it is assumed that basically the nuclear power generation will be expanded, that the photovoltaic and waste power generation will be introduced in a large quantity, and that synthetic methanol and hydrogen are mainly used as transportation and commercial/residential use fuels. It is necessary, therefore, to analyze conditions under which the quantity introduction of such non-fossil energy is made possible. 11 figs., 31 tabs.

Study of the influence of microgravity on the biological cells and molecular level; Seitai saibo bunshi level ni okeru bisho juryoku no eikyo ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The shape of osteoblast, gene appearance, gene of rice blast, cellular fusion of plants, gravity acceptance mechanism of unicellular organisms, and physiological and immunity functions of mice were investigated under the microgravity condition. The influence of gravity on the vital reaction and the influence of microgravity on the crystallization of vital substances were also investigated. For the observation of osteoblast, the fluorescence dye reacted with Ca was well taken in the cells. The microgravity affected the stability of rice blast, but hardly affected the protoplast culture of mushroom. The reaction of ciliate against the gravity related to the specific gravity difference between cells and outer liquid. The level of adrenaline in blood of mice increased during the drop. The moving speed of trigger waves of chemical parallel slit formed at the BZ reaction under the microgravity became 60% to 80% of that on the ground. In the case of crystallization at the deposition agent concentration of 1% to 4%, the turbidity showing the degree of crystallization changed complicatedly. Nine processes of crystal growth were recognized. 21 refs., 55 figs., 1 tab.

Fiscal 1994 survey report. Survey of energy supply/demand structure sophistication and global environmental impact; 1994 nendo energy jukyu kozo kodoka chikyu kankyo eikyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

Outlines of various energy supply/demand analytical models are surveyed. With environmental problems gathering importance, a number of models are being introduced in which energy supply/demand structures, long-term climate changes, and impacts of policy options on social economy are linked to each other. Some socioeconomic impact models cover a single country and others the whole world. They are various in type, ranging from dynamic optimization models to static balance models. Twenty-four models are chosen, and grouped into two types respectively covering Japan and the whole world from a geographical viewpoint and into three groups in view of their structures. Under an optimization model, such optimization is accomplished as economic growth maximization and energy cost minimization and so forth under given energy supply restrictions. Under a general balance type econometric model, an adjustment process in which capital and labor and production are coordinated across multiple departments is expressly stated. Under a partial balance type econometric model, a demand function for goods is given and optimum behavior such as consumption maximization is indirectly described. (NEDO)

Engine performances and exhaust gas characteristics of methanol-fueled two-cycle engines. Kogata ni cycle ter dot methanol kikan no seino ni oyobosu shoinshi no eikyo

Energy Technology Data Exchange (ETDEWEB)

Sawa, N.; Kajitani, S. (Ibaraki Univ., Ibaraki (Japan). Faculty of Engineerineering); Hayashi, S.; Kubota, Y. (Muroran Inst. of Technology, Muroran (Japan))

1990-10-25

Regarding crank case compressed two cycle engine, feasibility of methanol-fueled engine was investigated by studying effective factors on properties of power, combustion, and exhaust gas. For the experiment, air-cooling single cylinder engine was used of which specification was shown by table. As for the experiment, quantities of in-taken air, fuel consumption, torque, and composition of exhaust gas were measured under various conditions. As the consideration of experimental results, those were obtained that less exhaust gas with high performance operation of tow-cycle engie was achieved, too, by using diluted mixture gas of methanol, and that problems were found to be studied for the realization of high compression ratio. 12 refs., 13 figs., 1 tab.

Ecological effects assessment of anionic surfactant on aquatic ecosystem using microcosm system; Microcosm wo mochiita in ion kaimen kasseizai no suiken seitaikei ni oyobosu eikyo hyoka

Energy Technology Data Exchange (ETDEWEB)

Takamatsu, Y. [University of Tsukuba, Tsukuba (Japan); Inamori, Y. [National Institute for Environmental Studies, Tsukuba (Japan); Sudo, R. [Tohoku University, Sendai (Japan). Faculty of Engineering; Kurihara, Y. [Ou Univ., Fukushima (Japan). Faculty of Engineering; Matsumura, M. [University of Tsukuba, Tsukuba (Japan). Institute of Applied Biochemical

1997-11-10

Microcosm system was applied to assess effect of anionic surfactant (LAS) on aquatic ecosystem. Anionic surfactant such as LAS was added to an flask microcosm consisting of four species of bacteria as decomposer, one species of ciliate protozoa (Cyclidium glaucoma), two rotifers (Philodina sp. and Lepadella sp.) and one aquatic oligochaete (Aeolosoma hemprichi) as predator, and a green alga (Chlorella sp.) and a filamentous blue-green alga (Tolypothrix sp.) as producer, comparing with that of an natural lake model ecosystem derived from natural lake water. In the flask microcosm system and the natural lake model ecosystem, biodegradation rates of LAS were almost same and NOECs (no observed effect concentration) of LAS were also below 1.5 mg{center_dot} l{sup -1}. It was found that flask microcosm test could provide precise ecological effect assessment of LAS on number of microorganisms because the system showed higher reproducibility and stability than natural take model ecosystem. It was suggested that flask microcosm test was useful ecological effect assessment method which can reflect natural aquatic ecosystem. 10 refs., 4 figs., 2 tabs.

Remote sensing data analysis for assessment of sea level change in Asia; Asia ni okeru kaisuijun hendo eikyo hyoka no tame no remote sensing gazo kaiseki

Energy Technology Data Exchange (ETDEWEB)

Okubo, Y; Tanaka, A [Geological Survey of Japan, Tsukuba (Japan); Kaku, M [Bishimetal Exploration Co. Ltd., Tokyo (Japan)

1997-10-22

Remote sensing images include information of coastal land division, sea level change such as sedimentary environment and vegetation, and distribution of artificial structures. Past sea level changes and their causes can be regionally obtained by analyzing these data and by integrating them with information obtained from geological survey. In this study, causes and history of past sea level changes, formation mechanism of coastal topography, and past sea level change survey in Thailand have been reviewed. This paper describes an extraction method of the sea level change information in coastal districts by analyzing several actual remote sensing images. For understanding the current sea level rise, it is required to clarify the causes quantitatively among three causes of sea level changes, i.e., volumetric change of total ocean water on the earth, relative sea level change due to the crustal deformation, and change of irregularity of sea surface with ocean current. It is also required to compile maps in Asian or global scales. 13 refs., 6 figs.

Method for estimation of the spectral distribution that influence electric power of PV module; Taiyo denchi shutsuryoku ni eikyo wo ataeru bunko nissha bunpu no suiteiho

Energy Technology Data Exchange (ETDEWEB)

Yamagami, Y.; Tani, T. [Science University of Tokyo, Tokyo (Japan)

1997-11-25

A method was proposed for estimating the spectral distribution using air mass, precipitable water, and clear indexes which are generally obtainable, and a comparative study was made between the spectral distribution obtained by this method and the measured data using output power of PV modules, etc. as indexes. When solar light comes into the atmosphere, it dissipates receiving scattering/absorption by various gases and aerosols. Direct light component and scattered light component which arrive at the earth surface become functions of air mass and precipitable water. The wavelength distribution of scattered light in cloudy sky is not dependent upon air mass, but affected strongly by absorption band by steam of clouds. By relational equations considered of these, output power and short-circuit current of PV modules are obtained to make a comparison with the measured data. As a result, it was found that this method estimated the spectral distribution with accuracy. Further, seasonal changes in the spectral distribution were well reproduced. The simulation of the module output in Sapporo and Okinawa brought a result that the output in Okinawa is 1.93% larger than in Okinawa. 5 refs., 5 figs., 6 tabs.

Changes in soil organisms by the application of sludge composits, and their effects. Odei taihirui no shiyo ni tomonau dojo seibutsu no henka to sono eikyo

Energy Technology Data Exchange (ETDEWEB)

Niijima, K.; Fujita, K.; Ogawa, M. (Forestry and Forest Products Research Institute, Tsukuba (Japan))

1993-08-31

With an objective to utilize sewage sludge more effectively, composted sewage sludge has been applied to seed beds to investigate its effect on soil macrofauna and higher fungi, and its relativity with change in soil organisms, growth of young trees, and soil science. Forty-eight seedling sections, each 5 m [times] 5 m, were made on a seed bed which was applied with Tenryu sludge composts (polymer-based coagulant), several other kinds of sludge composts, fallen leaf composts, and cattle excrement composts at predetermined rates from zero to 20 kg. Each section was planted with 25 three-year-old nursery trees of a kind of oak, black pine, and cypress. As a result, the following findings were obtained: wet weight of larvae of Japanese gold beetles that attack tree roots has increased during the first and second years in the Tenryu sludge applied section, but no longer increased in the third year; the relationship between the other composts and soil macrofauna was not made clear; Scleroderma Cepa PERS, a mycorrhiza bacteria, has been generated in the oak planted section in the second, third and fourth years, with the second year particularly having generated it in a greater amount in proportion with the fertilizer application amount, but the fertilizer effect thereafter is not clear. 24 refs., 6 figs., 9 tabs.

Effects space velocity and gas velocity on DeNOx catalyst with HC reductant; HC tenka NOx kangen shokubai no kukan sokudo oyobi gas ryusoku no eikyo

Energy Technology Data Exchange (ETDEWEB)

Niimura, K.; Tsujimura, K.

1995-04-20

Discussions were given on the hydrocarbon added reduction catalyst method to reduce NOx in diesel engine exhaust gas. An experiment was carried out with actual exhaust gas from a diesel engine by using a copper ion exchanged zeolite catalyst that has been coated on a honeycomb type substrate, and using propylene as a reductant. When the catalyst volume was changed with the exhaust gas space velocity kept constant, the NOx conversion ratio decreased as the catalyst length is decreased, and the activity shifted to the lower temperature side. The NOx reduction efficiency increased if the faster the gas flow velocity. On the other hand, if the gas flow velocity is slow, the NOx reduction can be carried out with relatively small amount of the reductant. When the catalyst volume was changed with the passing gas amount kept constant, the NOx conversion ratio decreased largely if the catalyst length is decreased. Further, the NOx reduction characteristics shift to the higher temperature side. In the catalyst length direction, the NOx reduction activity shows a relatively uniform action. However, a detailed observation reveals that the reaction heat in the catalyst is transmitted to the wake improving the activity, hence the further down the flow, the NOx conversion ratio gets higher in efficiency. 5 refs., 5 figs., 3 tabs.

Report for fiscal 2000 investigations on effects imposed by introducing emission trading system; 2000 nendo haishutsuryo torihiki system donyu ni yoru eikyo ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With regard to effectiveness of the emission trading targeted to reduce the greenhouse effect gas emission, evaluation has been given from the three viewpoints: economies, environment, and household economy. In the research, simulations were implemented by using the GEC calculation model modified for introduction of domestic emission trading, and utilization of international emission trading. In evaluating the effects on industries and foreign trades, notice was given on the large energy consuming industries to discuss the effects of introducing the emission trading on the quantity of production and export. Regarding the effects on environment, calculations and discussions were given on greenhouse effect gas leakage rates to assess the greenhouse effect gas emission reducing effects from the domestic and international viewpoints. As a result of the discussions, it was found that the economies, environment and household economy are all benefited in regard with the domestic emission trading. Utilization of the international emission trading was also found to have sufficient positive benefit exist for the economies and household economy. (NEDO)

Influence of strain hardening and thickness changes occurring in press forming process; Seikeiji no kako koka/itaatsu henka no buzai akkai tokusei ni oyobosu eikyo bunseki

Energy Technology Data Exchange (ETDEWEB)

Ueno, M; Hirota, K [Mazda Motor Corp., Hiroshima (Japan); Nakazawa, Y [Sumitomo Metal Industries Ltd., Osaka (Japan)

1997-10-01

Most components of the body structure are produced by press forming. This process make a uniform metal sheet into a component that have various material characteristics and thickness. This paper describes the estimation method of material characteristics and thickness changes based on the measured Vickers hardness, and the influence of these changes on the crush performance by using FE analysis. 4 refs., 12 figs., 2 tabs.

Effect of laser heat treatment on intergranular corrosion of austenitic stainless steel; Austenite kei stainless ko no ryukai fushoku kanjusei ni oyobosu laser netsushori no eikyo

Energy Technology Data Exchange (ETDEWEB)

Osawa, M.; Yoneyama, T. [Tokyo Denki University, Tokyo (Japan). Faculty of Engineering; Isshiki, Y. [Tokyo Metropolitan Industrial Technology Center, Tokyo (Japan)

1995-03-15

The laser heat treatment of SUS304 steel was studied to lower the intergranular corrosion sensitivity of austenitic stainless steel. By the short-time heating around 923K, the SUS304 steel is sensitized to the intergranular corrosion with the deposition of Cr carbide into the granular field of crystals. To recover it, it is necessary to solidly dissolve, and simultaneously, quickly cool the Cr carbide above 1273K. For such solution heat treatment, CO2 laser beams were used with the treatment condition that the power and beam diameter were 800 to 1200W and 0.3 to 0.64cm, respectively. Regardless of both power density and beam diameter, the desensitization was observed at heating temperatures above 1323K. As a result of calculation by simulation, the solid dissolution of Cr carbide and recovery of Cr`s depletion zone in the granular field of crystals took place in a very short time at heating temperatures above 1323K. It agreed well with the experimental result. The laser beams are effective in the solution heat treatment of stainless steel. 14 refs., 15 figs., 1 tab.

Effect of fish on water quality and nutrients cycle from an outdoor pond experiment; Sakana no suishitsu, busshitsu junkan ni oyobosu eikyo ni kansuru jikkenteki kenkyu

Energy Technology Data Exchange (ETDEWEB)

Fukushima, T.; Matsushige, K.; Aizaki, M. [National Inst. for Environmental Studies, Tsukuba (Japan); Park, J.; Goma, R. [Tokyo University of Fisheries, Tokyo (Japan); Kong, D. [Korea National Institute of Environmental Research, Seoul (Korea, Republic of)

1995-11-10

The influences of fish (goldfish) on water quality and nutrients cycle (carbon, nitrogen, phosphorus) were investigated during 39 days in the summer of 1993, using six outdoor experimental ponds (36 m{sup 3}) with the same water residence times and nutrient inputs. Blue-been algae dominated the ponds with fish. Compared with ponds without fish, the ponds with high densities of fish had standing stocks of zooplankton and macrozoobenthos nearly one order of magnitude lower, about twice the concentrations of chlorophyll a and twice the rate of primary production. Settling rates of particulate substances in the high density ponds were nearly half those observed in ponds with no fish. The processes of sedimentation and exchange with air played important roles in the nutrient budgets as well as the in- and outflows and the changes in nutrient standing stocks. The high concentrations of chlorophyll a in the fish ponds were attributed in part to the lower zooplankton grazing pressure and in part to the higher nutrient concentrations due to lower settling rates and rapid nutrient recycling between biomass and dissolved components. 28 refs., 8 figs., 6 tabs.

FY 1980 Report on results of research and development project, commissioned by Sunshine Project. Researches on R and D of management procedures; 1980 nendo kenkyu kaihatsu kanri shuho no kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

The strategic system planning procedures have been developed and applied for drafting R and D targets and subsequent medium-term plans, in order to help promote the Sunshine Project smoothly, based on the long-term prospects. This project compares the developed procedures with the current promotion systems and R and D management supporting procedures, to establish the strategic system planning procedures. These newly developed procedures are expected to accelerate the Sunshine Project, when applied in the standard manner. They are also partly applied to coal liquefaction techniques for (system demand analysis), the results of which are used to propose the ideal R and D targets of these techniques. The milestone planning procedures are preliminary applied to (establishing the project plans), to draw systematic long-, medium- and short-term plans. The preliminary application of these prediction/analysis and supporting procedures has verified effectiveness of the strategic system planning procedures. (NEDO)

Research on the general analytical method of fossil fuel cycle from a viewpoint of the global environment. 3; Chikyu kankyo kara mita sogoteki kaseki nenryo cycle bunseki hyoka shuho no chosa. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The general analysis/assessment method of a fossil fuel cycle was studied. Seven kinds of power generation plants such as LNG cycle and coal cycle ones, and four kinds of transport and treatment systems of recovered CO2 such as ocean and underground systems were studied as case studies on life cycle analysis. As data necessary for life cycle analysis, the database was constructed which stores the facilities and operational energy required for a total energy system from mining of fossil fuel to treatment of recovered CO2, and the quantity of environmental waste such as CO2 emission. As a result, the decrease rate of energy balance defined as ratio of input energy to power plant output was estimated to be 14-43% and 20-60% in LNG cycle and coal cycle, respectively. Even if the recovery rate of CO2 in power plants reached 80-90%, reduction of total CO2 emission was limited to only 20-40% because of CO2 emission during mining, liquefaction and transport of fuel. 168 refs., 48 figs., 102 tabs.

Study on wind turbine for Yamagata wind energy institute. Comparison of the actual and estimate values for electric power; Yamagata furyoku hatsudensho no fusha ni tsuite. Hatsudenryo yosoku to jissekichi no hikaku

Energy Technology Data Exchange (ETDEWEB)

Nagai, H [Nihon University, Tokyo (Japan); Kojima, T [Yamagata Wind Energy Institute, Yamagata (Japan)

1996-10-27

For two 400kW wind turbines erected in Jan. 1996 of Yamagata Wind Energy Institute, their estimated power output was compared with actual output for 7 months. AMeDAS data in 1985-94 were totaled every month to use as basic data. The altitude and surface roughness model necessary for WAsP analysis recommended by NEDO`s wind condition close inspection manual were prepared using 1/25,000 maps and aerial photographs. The obstacle model for estimating wind conditions at height of the wind turbine was prepared using the data obtained by field survey. Mean wind velocity and latent energy were determined by statistical analysis of wind velocity occurrence relative frequencies and Weibull distribution parameters. The power output of 717,700kWh was obtained for 7 months, which is equivalent to 88.5% of the estimated output of 810,730kWh for the same period. It was clarified from obtained characteristic wind conditions at the site that the wind power generation is promising at the site not only in winter but also in summer. Although the test period was too short, this method was effective as analytical method of output estimation in the planning stage of wind turbines. 3 refs., 8 figs., 4 tabs.

On the sea-covering effect of a huge floating structure on the surrounding water; Choogata futai shuhen no kaisui ni taisuru kaimen shahei no eikyo ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Fujino, M; Kagemoto, H; Hamada, T [The University of Tokyo, Tokyo (Japan)

1997-12-31

The numerical analysis program based on the difference method for dynamics of sea water with sea-surface displacement, flow rate, salt content and temperature as the parameters is modified to more accurately assess the effects of a huge marine structure on surrounding environment by adding the effects of insolation and boundary conditions of the sea-covering effects of the floating structure. The numerical simulation was done for summer and winter seasons, not in a sea area but using a rectangular bay with the floating structure at the center. A new flow evolves around the floating structure, due to the sea-covering effect. The flow patterns in summer and winter are clearly different, due to difference in insolation. The predicted flow is also sensitive whether stratification is considered or not, by which is meant that it is important what stratification effect is taken into account. Daily insolation changes are accompanied by vertical distribution of water temperature and its temporal change. These effects are also observed under the floating structure which shields insolation. 10 refs., 17 figs., 4 tabs.

Studies on surface tension effect for free surface flow around floating models; Futai mokei mawari no jiyu hyomenryu ni oyobosu hyomen choryoku no eikyo ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Suzuki, K [Yokohama National Univ., Yokohama (Japan). Faculty of Engineering; Akiba, H [Toyo Construction Co. Ltd., Tokyo (Japan)

1997-12-31

The effect of surface tension on free surface flow around floating models is discussed experimentally and numerically. Three-dimensional free surface flow around vertical circular cylinders floating in a circulating water channel was visually observed, where a surface-active agent was added to water. The results are analyzed using Weber number. The numerical analysis was done for vertical cylinder and CY100 models using the Rankine source method. Weber number of at least around 120 is necessary to eliminate the effect of surface tension from free surface flow around the CY100 model. The numerical analysis for the cylinder model needs simulation with wavelength shorter than that of free surface wave used by the Rankine source method. The model for the resistance test should be at least around 7m long to eliminate the effect of surface tension at Froude number of 0.1 or higher. 15 refs., 12 figs., 2 tabs.

Coliquefaction of coal, tar sand bitumen and plastic (interaction among coal, bitumen and plastic); Sekitan/tar sand bitumen/plastic no kyoekika ni okeru kyozon busshitsu no eikyo

Energy Technology Data Exchange (ETDEWEB)

Yamaguchi, H.; Okuyama, Y.; Matsubara, K. [NKK Corp., Tokyo (Japan); Kamo, T.; Sato, Y. [National Institute for Resources and Environment, Tsukuba (Japan)

1996-10-28

For the improvement of economy, coliquefaction of coal, tar sand bitumen and plastic was performed under low hydrogen pressure, to investigate the influence of interaction among these on the liquefaction characteristics. For comparison, coliquefaction was also performed under the hydrogen pressure same as the NEDOL process. In addition, for clarifying its reaction mechanism, coliquefaction of dibenzyl and plastic was performed as a model experiment, to illustrate the distribution of products and composition of oil, and to discuss the interaction between dibenzyl and various plastics, and between various plastics. Under direct coal liquefaction conditions, coprocessing of Tanito Harum coal, Athabasca tar sand and plastic was carried out under low hydrogen pressure with an autoclave. The observed value of oil yield was higher than the calculated value based on the values from separate liquefaction of coal and plastic, which suggested the interaction between coal and the mixed plastic. The results of coliquefaction of coal, tar sand bitumen and plastic could be explained from the obtained oil yield and its composition by the coliquefaction of dibenzyl and plastic. 2 refs., 3 tabs.

Wall effect in deactivation of excited molecular oxygen {sup 1}{delta}g; Reiki sanso bunshi {sup 1}{delta}g no shikkatsu ni oyobosu hyomen hanno no eikyo

Energy Technology Data Exchange (ETDEWEB)

Takahashi, S.; Hasegawa, Y.; Yamashita, I. [Mechanical Engineering Laboratory, Tsukuba (Japan)

1993-10-25

This paper discusses effects of surface reaction on deactivation of excited molecular oxygen in {sup 1}{Delta}g condition. Gaseous oxygen containing excited oxygen generated by microwave discharge at a concentration of less than 1% is flown into several kinds of tubes to be measured such as quartz tubes (with an inner diameter of about 10 mm), and the light emitting intensity of the excited oxygen was measured upstream and downstream of the tubes to be measured (with in-tube pressure of 1 Torr or 2 Torr) to derive its concentration change. The surface reaction on the tube wall was regarded as a primary reaction, and the concentration change of the excited oxygen in flows in the round tube (attributable to the surface reaction) was analyzed. With respect to effects of tube wall materials on deactivation of the excited molecular oxygen, the surface deactivation probability in the case of using low-activity materials has decreased in the order of Pyrex, PVC, quartz, PFA and PTFE. The surface deactivation probability in the case of using a metallic material, SUS316L, was about 1000 times larger than that in the quartz. 14 refs., 7 figs., 1 tab.

Effect of grain size on amplitude-dependent internal friction in polycrystalline copper. Do takessho no naibu masatsu no shinpuku izon sei ni oyobosu kessho ryukei no eikyo

Energy Technology Data Exchange (ETDEWEB)

Goto, H.; Nishino, Y.; Asano, S. (Nagoya Inst. of Technology, Nagoya (Japan))

1991-08-20

In this research, amplitude-dependency of internal friction was measured on various polycrystalline copper of varying grain size. Furthermore, the measurement data of amplitude-dependency of internal friction were analyzed from the phenomenological standpoint and microplastic strain was calculated as a function of stress. The obtained correlation between microplastic strain and stress corresponded to the stress-strain curve obtainable from normal tensile tests. Hence, comparing with the Hall-Petch relation, the relationship between flow stress and grain size in the microplastiic zone was discussed. The obtained results are summarized as follows: When grains were refined, amplitude dependency of internal friction was inhibited. As a result of the analysis of the data obtained, it was found that the flow stress in the microplastic zone increased following refining of grains. This agreed qualitatively with the macro deformation obtained from normal tensile tests. The grain size dependency of flow stress in the microplastic zone did not follow the normal Hall-Pitch relation, but the plastic strain increased, the dependency moved towards it. 16 refs., 4 figs.

On the sea-covering effect of a huge floating structure on the surrounding water; Choogata futai shuhen no kaisui ni taisuru kaimen shahei no eikyo ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Fujino, M.; Kagemoto, H.; Hamada, T. [The University of Tokyo, Tokyo (Japan)

1996-12-31

The numerical analysis program based on the difference method for dynamics of sea water with sea-surface displacement, flow rate, salt content and temperature as the parameters is modified to more accurately assess the effects of a huge marine structure on surrounding environment by adding the effects of insolation and boundary conditions of the sea-covering effects of the floating structure. The numerical simulation was done for summer and winter seasons, not in a sea area but using a rectangular bay with the floating structure at the center. A new flow evolves around the floating structure, due to the sea-covering effect. The flow patterns in summer and winter are clearly different, due to difference in insolation. The predicted flow is also sensitive whether stratification is considered or not, by which is meant that it is important what stratification effect is taken into account. Daily insolation changes are accompanied by vertical distribution of water temperature and its temporal change. These effects are also observed under the floating structure which shields insolation. 10 refs., 17 figs., 4 tabs.

Studies on surface tension effect for free surface flow around floating models; Futai mokei mawari no jiyu hyomenryu ni oyobosu hyomen choryoku no eikyo ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Suzuki, K. [Yokohama National Univ., Yokohama (Japan). Faculty of Engineering; Akiba, H. [Toyo Construction Co. Ltd., Tokyo (Japan)

1996-12-31

The effect of surface tension on free surface flow around floating models is discussed experimentally and numerically. Three-dimensional free surface flow around vertical circular cylinders floating in a circulating water channel was visually observed, where a surface-active agent was added to water. The results are analyzed using Weber number. The numerical analysis was done for vertical cylinder and CY100 models using the Rankine source method. Weber number of at least around 120 is necessary to eliminate the effect of surface tension from free surface flow around the CY100 model. The numerical analysis for the cylinder model needs simulation with wavelength shorter than that of free surface wave used by the Rankine source method. The model for the resistance test should be at least around 7m long to eliminate the effect of surface tension at Froude number of 0.1 or higher. 15 refs., 12 figs., 2 tabs.

Achievement report for fiscal 1998. Development of Assessment Technology of Life Cycle Environment Impacts of Products; 1998 nendo seika hokokusho. Seihinnado lilfecycle kankyo eikyo hyoka gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

An inventory data collecting format is formulated, data collecting activities are launched through 23 industry associations and several investigatory agencies, and almost all the primary data are collected. All the inventory items are being rearranged into a convenient order, and efforts are under way to designate the association to be in charge and the method to be used for data collecting (the accumulation method, process model method). Problems about techniques in the veinous department are extracted. The flow of matters relating to various metals and glass after their use and the magnitude of their environmental impacts at the ultimate sites of treatment are understood though roughly. Investigations are conducted into typical formats overseas, a data arranging format is constructed, specifications are defined for a data inputting software program, and a request is placed with a dedicated dealer for the compilation of the said program. The architecture and specifications of an LCA (life cycle assessment) database system are determined, and its functions are undergoing an intermediate check by a research team for improvement. Endeavors are exerted at quantifying global warming, ozone layer depletion, biotoxicity, and photochemical oxidants for use as the basic data for damage evaluation. (NEDO)

Investigation of local-dimensional galvanic distortion on MT data in the central part of Northeastern Japan; Tohoku chiho no MT data ni mirareru kyokushoteki sanjigensei no eikyo

Energy Technology Data Exchange (ETDEWEB)

Kawakami, N; Takasugi, S [GERD Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Fujinawa, Y [National Research Institute for Disaster Prevention, Tsukuba (Japan)

1996-10-01

Groom-Bailey decomposition analysis was carried out to investigate regional 3-D galvanic distortion on MT data in the central part of Northeastern Japan. Measuring sites were located nearly along the east-west line crossing Northeastern Japan. Three measuring lines (A, B, C) from the north to the south were prepared, and only data on the C line were analyzed in this paper. As a result, twist and shear were estimated to be not zero depending on local distortion in most of the sites. It was thus clarified that this method is not always perfect. This method was effective for regional 2-D structures, however, its application was doubtful to complicated 3-D underground structures in Japan. In order to obtain more accurate results, 2-D analysis using the impedance including no local distortion effect was necessary after the preliminary Groom-Bailey decomposition analysis. The direction of the wide area geological structure of Northeastern Japan was estimated to be N-S direction near NNW-SSE one. 6 refs., 12 figs., 1 tab.

Effect of release sheet on the preparation of CF paper/aluminium phosphate composite; Tanso sen`i paper/rinsan aluminium fukugo zairyo choseiji ni okeru hakurizai no eikyo

Energy Technology Data Exchange (ETDEWEB)

Hoshii, S.; Kojima, A. [Gunma National College of Technology, Gunma (Japan); Otani, S. [Tokai University, Tokyo (Japan). School of High-Technology for Human Walfare

1995-12-27

A composite material was prepared with carbon fiber (CF) and a matrix of phosphate (as named ACP) mainly consisting of aluminum phosphate. CF was used in the form of felt cloth. Prepreg was made with CF and ACP, which was laminated and formed under pressure in a hot press into a composite. The prepreg was pretreated by drying at 80{degree}C to form a compact matrix and to increase the adhesion between laminated prepregs. At the hot press treatment thorough removal of water was tried by using absorbent sheet and release sheet to form a compact structure. Consequently, porosity of CF/ACP composite decreased, and its bulk density and bending strength increased. SEM observation showed the formation of vitreous and compact matrix. Besides, adhesion between prepregs and shear fracture resistance were improved. 24 refs., 3 figs., 3 tabs.

Effect of separation and drainage of condensate on dehumidification in a refrigerated dryer; Reito joshitsuki ni okeru gyoshukusui bunri/haishutsu noryoku no joshitsu seino ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Goto, H.; Ichinose, T. [SMC Corp., Tokyo (Japan); Tanzawa, Y.; Hashizume, T. [Waseda Univ., Tokyo (Japan). Science and Engineering Research Lab.

1995-11-15

The representative refrigerated dryer as the compressed air dryers is one in which air was cooled at rather low temperature by working medium of refrigerators, and the dew point was decreased with increase of pressure, and air with low relative humility called as the dried air was obtained again by heating. In this paper, for clarifying effect of separation and drainage of condensate on dehumidification in a refrigerated dryer in relation to shape of a main cooler and a precool-reheater and air temperature of each part, calculation and experimental investigation were conducted. In a refrigerated dryer, condensate happened in the precool part of a precool-reheater and a main cooler, and this would give rise to reduce of separation and drainage of condensate and increase of thermal loads of each heat exchange, and would made dehumidification low. For a fact that decrease of separation and drainage of condensate in a main cooler would bring out heat conduction with phase change in the reheating part of a precool-reheater, it has a profitable side, but it is not desirable for ability of dryers. 6 refs., 9 figs., 1 tab.

Methods for constructing time synchronous networks. Part 1. Consideration and experiment of time synchronizing functions and devices; Zenkei jikoku dokimo no kosei shuho. 1. Jikoku doki hoshiki no kino kento to jikkenteki kensho

Energy Technology Data Exchange (ETDEWEB)

Serizawa, Y.; Kitamura, K.; Myojin, M.; Shimizu, K. [Central Research Institute of Electric Power Industry, Tokyo (Japan); Nenohi, H.; Morimitsu, M.; Masui, O.; Matsushima, T. [NEC Corp., Tokyo (Japan)

1996-03-01

For the purpose of the back-up protection of regional power line system and the protection and control of accident influence, construction methods of time synchronizing network have been investigated. This paper proposes a method suitable for business power communication. For the synchronization between stations, transmission delay and its fluctuation have to be measured accurately by transmitting time signals between stations. Based on the observed delay values, the function of time correction (phase synchronizing control) of synchronized station is required. A mutual type synchronizing method was proposed, to which a sampling synchronization method of carrier relay system for transmission line protection was applied. In this method, transmission of time signals and measurement of delays are mutually conducted between stations, and phases of independent transmitters of the both stations are controlled so as to be equivalent. This method is characterized by the suppression of delays with fluctuation in the same direction of two-way transmission. For the transmission of time signals, two types of synchronizing devices were employed, i.e., synchronous and asynchronous manners. In the former, frequency synchronous network of SDH (synchronous digital hierarchy) was synchronized. In the latter, a carrier relay device was utilized independent of frequency synchronous network. It was expected that a synchronous network with an order of {mu}s can be constructed. 11 refs., 21 figs., 3 tabs.

FY 1999 report on the results of the R and D project on the industrial technology for the global environment. R and D of the prediction technology of environmental effects brought by CO2 ocean sequestration (Ocean survey and development of evaluation technology for CO2 sequestration ability); 1999 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo NEDO seika hokokusho. Nisankatanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu (Kaiyo chosa oyobi CO2 kakuri noryoku hyoka gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Assuming the melting and sequestration of CO2 at the intermediate depth of the sea area around Japan, study of evaluation technology of CO2 sequestration ability in ocean was studied, and the FY 1999 results were summed up. In the ocean survey, survey was conducted by ship (No.2 Hakurei-maru) mainly at typical observation points and traverse lines of long. 147 E and long. 155 E. In the survey, the following data were acquired: data on seawater density and chemical tracer, data on release of intermediate-depth/independent buoys, concentration distribution of carbonic acid base substances/nutrient salts/chlorophyll, data on the existing amount of marine organisms and primary production speed measurement experiment, data on experiment on CO2 on-board exposure to organisms in the intermediate depth of ocean, etc. In the measurement/analysis of the sediment particle flux amount, sediment traps were installed/recovered. Further, for the purpose of measuring the neutralizing effect of calcium carbonate, operation test on CaCO{sub 3} melting experimental equipment was conducted in the actual sea area. In the development of a model for evaluation of CO2 sequestration ability, carried out were the improvement of the model using the inverse method, study of the estimated accuracy using the ocean observation data, etc. (NEDO)

Heat and mass transfer in a reforming catalyst bed. Analytical prediction of distributions in the catalyst bed; Kaishitsu shokubaiso ni okeru netsu oyobi busshitsu ido. Suchi kaiseki ni yoru sonai bunpu no yosoku

Energy Technology Data Exchange (ETDEWEB)

Usami, Y [Tokyo Electric Power Co. Inc., Tokyo (Japan); Fukusako, S; Yamada, M [Hokkaido University, Sapporo (Japan)

2000-01-25

Heat and mass transfer characteristics within a reforming catalyst bed have been analytically investigated. A numerical analysis was carried out in a two-dimensional steady-state model of reforming catalyst layer. Reforming tube was filled with catalyst and the tube wall was uniformly heated, a mixture of steam and methane was reformed through the catalyst bed. Predicted temperature, formed gas composition, methane conversion rate, and heat transfer coefficient distributions in the catalyst layer showed good agreement with experimental data. The effects of space velocity, steam carbon molar ratio, and wall temperature on the heat transfer coefficient were analytically presented. From temperature and composition distributions simulated by two-dimensional analysis, the effects of these factors above mentioned and diffusion on the transport phenomena were qualitatively predicted. (author)

FY1995 comprehensive assessments of measures mitigating heat island phenomena in urban areas; 1995 nendo heat shinku wo riyoshita daikibo reibo system no kaihatsu (daitoshi ni okeru kaki koonka taisaku gijutsu no hyoka shuho)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The urban heat-island phenomenon is one of the man-made changes of local climate. The objectives of this research are to develop a heat-island model to cover the building scale to mesoscale and to assess the countermeasures to heat- island effects. The analysis of Tokyo by remote-sensing, field observation and estimates of anthropogenically exhausted heat using energy consumption data were conducted. And, techniques to assess the most effective countermeasure against the urban warming were developed. (NEDO)

OAM system based on TMN for utility telecommunication network. Proposal of modeling method about managed objects; TMN ni motozuku denryoku tsushinmo no un`yo kanri system. Kanri object no sekkei shuho ni kansuru kento

Energy Technology Data Exchange (ETDEWEB)

Hirozawa, T.; Yusa, H.; Otani, T. [Central Research Institute of Electric Power Industry, Tokyo (Japan); Okamura, K. [Tokyo Electric Power Co. Inc., Tokyo (Japan)

1996-03-01

To construct an advanced operation and management system for utility telecommunications management network (TMN), this paper proposes a modeling method of managed objects (MOs) required for managing and managed systems, such as an asynchronous transmission mode (ATM) exchanger. Flexible line setting and path switching control are required for the advanced TMN, which must cope with the extension and modification of functions, flexibly. Assignment of roles of managing sides and managed sides was determined. Then, structures of objects such as facilities and logic data, and their interaction were modeled. Common management functions and objects of each function were classified. Based on the TMN standard and MOs of the existing design peculiar to utility, new MOs peculiar to utility were defined in response to the models. The existing MOs can be effectively utilized, and the optimum MOs to be incorporated can be expected. The MOs peculiar to utility are added to the common specification of electric power industry. Since they can be reused for the extension and modification of functions, the cost can be reduced. The MOs applicable to path switching control of utility were designed as a trial. 9 refs., 16 figs., 10 tabs.

FY 2000 report on the survey of effects of enhancement of energy consumption efficiency on the global environment; 2000 nendo energy shohi koritsuka chikyu kankyo eikyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Looking for effective measures for enhancement of energy consumption efficiency in the Asia Pacific region, survey was made of the state of study of measures against global warming in the 3rd IPCC report and the state of study of the incidental convenience. The survey was made in the following two fields: 1) research analysis in study of the 3rd IPCC report; 2) research analysis of the convenience incidental to measures against global warming. 1) is composed of IPCC activities and the 3rd assessment report, and the developmental state of global warming prevention technology and potential of greenhouse effect gas reduction. Subjects on the prevention technology are the technology for enhancement of energy consumption and development of non-fossil fuels. Physical/chemical CO2 fixation is also studied. 2) is composed of the introduction, economic/social/environmental effects, international flow, reasons for different conclusion in every study, and fields of further study. Considered were global warming prevention measures, for example, economic/social/environmental effects of creation of the carbon tax, reduction in subsidy in energy sector, etc. (NEDO)

Report on achievements in fiscal 1998. Survey on environmental effects from photovoltaic power generation systems; 1998 nendo daikibo taiyoko hatsuden system no kankyo eikyo ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Different environmental effects may be assumed when large-size photovoltaic power generation systems are installed in vast unutilized lands including deserts. Knowledge having been acquired to date has been put into order on the following subjects as the pre-survey thereon: (1) environmental characteristics of desert areas, (2) discussions on environmental effects from (a) environmental assessment viewpoints, (b) contents of the environmental assessment, and (c) environmental assessment institutions, and (3) the survey policy. In discussing the environmental characteristics, it is revealed that desert areas are neither sterile nor unused, but pasturage and agriculture have been carried out in historical and traditional ways. In discussing the environmental effects, it was recognized that surveys on primary and secondary effects on the environmental are indispensable. With regard to the institutions, there are countries who have and have not the institutions even among the OECD member states. In addition, it was known that environments in the desert areas vary greatly according to the particular areas, whereas there are possibilities of installing the facilities because the effects of the facility locations on the environment are various. Therefore, it was decided to start from the case studies in locations of different types. (NEDO)

Influence of catalytic activity and reaction conditions on the product distribution in coal liquefaction; Sekitan ekikayu no seiseibutsu bunpu ni taisuru shokubai kassei oyobi hanno joken no eikyo

Energy Technology Data Exchange (ETDEWEB)

Hasuo, H.; Sakanishi, K.; Mochida, I. [Kyushu University, Fukuoka (Japan). Institute of Advanced Material Study

1996-10-28

The NiMo sulfide supported on Ketjen Black (KB) was more effective and yielded lighter oil products containing light fractions with their boiling point below 300{degree}C during the two stage liquefaction combining low temperature and high temperature hydrogenation the conventional NiMo/alumina catalyst and FeS2 catalyst. Although the NiMo/alumina yielded increased oil products during the two stage liquefaction, the lighter oil fractions did not increase and the heavier fractions increased mainly. This suggests that the hydrogenation of aromatic rings and successive cleavage of the rings are necessary for producing the light oil, which is derived from the sufficient hydrogenation of aromatic rings using catalysts. For the two stage reaction with NiMo/KB catalyst, it was considered that sufficient hydrogen was directly transferred to coal molecules at the first stage of the low temperature reaction, which promoted the solubilization of coal and the successive hydrogenation at the high temperature reaction. Thus, high activity of the catalyst must be obtained. It is expected that further high quality distillates can be produced through the optimization of catalysts and solvents at the two stage reaction. 1 ref., 4 figs., 1 tab.

Assessment of a Mega-Float on water quality and ecosystem in Tokyo bay; Choogata futaishiki kaiyo kozobutsu ga Tokyowan no suishitsu to seitaikei ni oyobosu eikyo ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Kyozuka, Y.; Hu, C.; Hasemi, H. [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Hikai, A.

1997-08-01

The effect on the marine environment in the bay when a Mega-Float is installed in a bay was investigated. The physical process such as a residual flow (including tidal currents, water temperature, salt, density, and density currents), and the ecosystem model for which floating organic matter and plankton are handled were incorporated to develop a program for water quality calculation in a bay. The program was used for Tokyo Bay and compared with the conventional calculation result and the oceanograhpic observation result. Simultaneously, the effect on the Mega-Float was considered. On the flow in Tokyo Bay in summer, the calculation result that comparatively coincided with the observation value in a residual flow level was obtained. The horizontal distribution of COD comparatively coincides with the existing observation result. The influence that the Mega-Float exerts on the flow, water temperature, water quality, and ecosystem in the ambient sea area was little and local in the calculation scale (L {times} B {times} d = 6 km {times} 3 km {times} 2 m) of this time. However, the difference occurring due to the design position must also be investigated in future. 12 refs., 8 figs., 5 tabs.

FY 1998 international cooperation project for global environment/project to evaluate influence of climate change; 1998 nendo chosa hokokusho. Chikyu kankyo kokusai kyoryoku jigyo/kiko hendo eikyo hyokanado jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

As a part of the international cooperation for the global warming problem, evaluation/study were conducted on policy to lessen climate changes from viewpoints of scientific technology, environment, and economy/society. In the development of evaluation methods on cost analysis, the following were pointed out: Changes in resource utilization brought about as a result of the policy are all needed to be numerated; In resource, clean air and water, and also abolition of price barrier and prices now in force are included. As subjects on the technology transfer, cited are barriers in aspects of organization/system and barriers in aspects of economy/finance and society. Especially, it was pointed out that it is necessary to exchange the persons concerned in the industrial sector. Of various optional policies toward the prevention of global warming, the Kyoto mechanism not only has an economical merit of the use of low cost option but can be fairly promising from an environmental viewpoint of internationally controlling the greenhouse effect gas emission, if the characteristic of practically using the market can be so designed that it fulfills its function. (NEDO)

Influence of fragmentation of substrate on synergistic effect in hydrolysis of crystalline cellulose with cellulases; Seruraze niyoru kessho serurosu bunkaikatei deno sojokoka ni oyobosu kishitsu no danpenka no eikyo

Energy Technology Data Exchange (ETDEWEB)

Tanaka, M.; Morita, M.; Mitsui, R. [Okayama University of Science, Okayama (Japan). Dept. of Biochemistry

2000-05-10

The expression mechanism of synergistic effect is investigated by using two cellulase components obtained from Meicelase CEP-6000 by purification. Purified cellulose components are classified into two types. One, tentatively named CMCase-type (FIE and FIIIE), has relatively low values of the ratio of MCC hydrolysis to CMC hydrolysis, and considerably high values of the ratio of K{sub m} for MCC and CMC. The other, tentatively named MCCase-type (FIIE and FIVE), has largely different values about those properties. In the case of MCC hydrolysis with FIVE alone, the particle diameter of MCC decreases (fragmentation) and the particle number of MCC increased rapidly in the early stage of reaction, and both decrease gradually in the late stage of reaction. In the case of a mixture of the above two components is for an increase in amounts of reaction site in the substrate for FIIIE, dependent on fragmentation of MCC by FIVE, and the activity of FIVE is stimulated by FIIIE. In the case of the mixture of FIE and FIIIE, the synergistic effect is not expressed. This finding suggests that these two components do not have the activity of fragmentation of MCC. (author)

Effect of heat transfer in cylinder on air quantity of 4-stroke cycle gasoline engine; 4 Stroke gasoline engine no kyunyu shinkiryo ni oyobosu cylinder nai dennetsu no eikyo

Energy Technology Data Exchange (ETDEWEB)

Yoshida, M.; Oguri, Y.; Suzuki, T. [Sophia University, Tokyo (Japan). Faculty of Science and Technology

2000-01-25

Many papers concerning air quantity of 4-stroke cycle gasoline engine have been published. It has been reported in these papers that heat transfer in surface of cylinder and inlet port gives big influence to the air quantity. But it has not been clear which influence of heat transfer in cylinder and inlet port is strong. So the authors derived a function of the air quantity thermodynamically considering heat transfer, and examined which of influence of heat transfer was strong. The results show ; (1) The influence of heat transfer in cylinder is small (about 1%) at full load, and is also small (about 5%) at light load. (2) Heat transfer in cylinder almost increases the air quantity. (3) The influence of heat transfer in inlet port decreases the air quantity with around 30% greatly. (author)

Improvement of the material with the hard pressure for high fireplace. Koroyo koshitsu atsunyuzai no kaizen. (2) Ataunyuzai no bussei ni ataeru kotsuzai [center dot] ekitai bainda no eikyo

Energy Technology Data Exchange (ETDEWEB)

Tanaka, R. (Harima Ceramics Corp., Hyogo (Japan))

1999-02-01

It had already been reported, and the damage factor of the material with the pressure was investigated from the core boring sample with an opportunity this time, and improvement was done about the kind of the bone material, the liquid binder as for the material with the pressure of the phenol plastic base and that system. The reduction of the amount of binder became possible by using a thick bone material, and the ones for the volatilization decreased by adding the plastic of the high concentration again, and the appearance pore rates of the material with the pressure decreased and worked for high strength performance as a result. This high strength performance is thought to be effective against the decrease of the mechanical abrasion to the thing with high fireplace, which is the damage cause of the material with the pressure. (translated by NEDO)

Improvement of the material with the hard pressure for high fireplace; Koroyo koshitsu atsunyuzai no kaizen. (2) Ataunyuzai no bussei ni ataeru kotsuzai {center_dot} ekitai bainda no eikyo

Energy Technology Data Exchange (ETDEWEB)

Tanaka, R. [Harima Ceramics Corp., Hyogo (Japan)

1999-02-01

It had already been reported, and the damage factor of the material with the pressure was investigated from the core boring sample with an opportunity this time, and improvement was done about the kind of the bone material, the liquid binder as for the material with the pressure of the phenol plastic base and that system. The reduction of the amount of binder became possible by using a thick bone material, and the ones for the volatilization decreased by adding the plastic of the high concentration again, and the appearance pore rates of the material with the pressure decreased and worked for high strength performance as a result. This high strength performance is thought to be effective against the decrease of the mechanical abrasion to the thing with high fireplace, which is the damage cause of the material with the pressure. (translated by NEDO)

Fiscal 1997 report on the survey of effects of enhancement of energy consumption efficiency on the global environment; 1997 nendo chosa hokokusho (energy shohi koritsuka chikyu kankyo eikyo chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper surveyed the state of studying the measures against global warming in the third assessment report of the Intergovernmental Panel on Climate Change (IPCC) and made analyses of the trends of preventive measures for global warming in other countries, aiming at presenting data for studying the future enhancement of energy consumption efficiency in the Asia Pacific region. In the U.S., a report was taken up from Executive Office of the President which is entitled `the federal government R and D of energy for solution to problems in the 21st century.` The report made analyses of the federal government R and D of energy and at the same time recommended an increase in R and D budget and reinforcement of the organization of the Department of Energy. In Europe, the carbon tax, CO2 tax, energy tax, etc. are introduced or studied for reduction of CO2 emissions. OECD made public a report approved in May 1997 which is entitled `the environmental tax and green tax reform.` Also studied were the introduction and effects of the carbon tax aiming at reducing CO2 emissions in developing countries. More attention is being paid to economic effects predicted in case developed countries reinforce various kinds of measures for targeted reduction of greenhouse gases. 2 figs., 4 tabs.

Effects of short fiber reinforcement and mean stress on tensile fatigue strength characteristics of polyethersulfone; Tansen`i kyoka porieterusaruhon no hippari hiro tokusei ni oyobosu heikin oryoku no eikyo

Energy Technology Data Exchange (ETDEWEB)

Furue, H.; Nonaka, K. [Mechanical Engineering Lab., Tsukuba, Ibaraki (Japan)

1996-01-15

Thermoplastics are often reinforced with short fibers with aims of improvement of their strengths, rigidities and hardness or maintenance of their dimensional stabilities. Such short fiber reinforced plastic materials have more expectation for high performance plastics. Authors already examined of some effects of reinforced fiber and of orientation in injection molding on flexural fatigue characteristics of the injection-molded high performance thermoplastic materials. However, the examination of short fiber reinforced effects on fatigue strength characteristics was not always sufficient. In this study, in order to obtain a guiding principle for fatigue resistant design of the short fiber reinforced injection molding materials, polyethersulfones (PES) was examined on its tensile fatigue strength and an effect of short fiber reinforcement for improvement of its fundamental dynamic properties on its fatigue characteristics. Especially, its fatigue life characteristics was elucidated mainly on relationship of mean stress, stress amplitude and number of repeating fracture in tensile fatigue behavior. 10 refs., 15 figs., 2 tabs.

Effect of metal ion species on mechanical relaxation of ethylene-co-methacrylic acid based ionomers; Ethylene-metakuriru san ionomer no rikigaku kanwa ni oyobosu kinzoku ion shu no eikyo

Energy Technology Data Exchange (ETDEWEB)

Zeng, X; Araki, O; Takigawa, T; Masuda, T [Kyoto University, Kyoto (Japan); Takahashi, M [Kyoto Institute of Technology, Kyoto (Japan)

1996-12-15

Dynamic viscoelasticity of ethylene-co-methacrylic acid (EMAA) based ionomers containing Zn or Na as well as EMAA was investigated. The film samples used for viscoelasticity measurements were molded at 195{degree}C. Two kinds of specimens, quenched and slowly cooled samples after molding, were prepared for each polymer specimen. For the quenched samples, the effect of aging on dynamic viscoelasticity was also examined. The temperature dispersion curves of dynamic storage modulus (E{prime}) of the ionomers obtained by quenching showed a large decrease around 35{degree}C due to the glass transition of EMAA ionomers. The ionomers prepared by slow cooling showed a high value of E{prime} in the high temperature region, compared with the quenched samples. This may be due to the difference in the degree of ionic cluster formation in the ionomers. The values of E{prime} at low temperatures increased with aging time for the quenched samples, which originates from the equilibration of the glassy state by aging. 14 refs., 7 figs., 1 tab.

Fiscal 1999 geothermal energy development promotion survey. Report on environmental impact survey - 5 (Musadake area); 1999 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.B-5 Musadake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-01-01

For the purpose of clarifying the environmental impact to result from the digging of borehole N11-MD-3 in Shibetsu-gun, Hokkaido, a survey was conducted of changes in (1) hot spring water quality, (2) noise/vibration pollution, and (3) air pollution due to hydrogen sulfide, before and after the digging period. Under item (1), measurements were made at four hot springs, which involved weather, air temperature, water temperature, amount of welled-up water, pH, electric conductivity, etc. Although minor changes were observed during the measuring period, none was found related to the digging process. Under item (2), noise levels were measured during the drilling period along the site boundary, at a point 500m from N11-MD-3, the Kawakita hot spring, and the entrance of Sekiyunosawa. Along the site boundary, they were 55-60 dB during the drilling period, and there was an increase of 30dB attributable to the drilling. At the 500m point, there was a 15-20dB increase attributable to the same. Vibration levels during the drilling period were 40dB along the site boundary and less than the observable minimum at the other points. Under item (3), at four points along the site boundary (50m), hydrogen sulfide concentration in the air fluctuated by 0.01-0.21ppm when the steam discharge rate was 4.47-7.20t/h. (NEDO)

Study on initial stage of diesel spray formation. Effects of the condition inside the nozzle sac; Diesel funmu no shoki keisei katei ni kansuru kenkyu. Sac nai nenryo no eikyo

Energy Technology Data Exchange (ETDEWEB)

Ishikawa, N.; Tsujimura, K. [Nissan Diesel Motor Co. Ltd., Saitama (Japan); Komori, M.

1996-06-25

To realize clean diesel exhaust, it is very important to clarify the atomization phenomena of the fuel spray. In this study, the initial stage of the atomization process of a diesel injection fuel spray was analyzed with a high-speed image converter camera under the conditions of atmospheric gas pressure and room temperature. As a result, it was found that the initial spray formation was greatly affected lay the condition inside the nozzle sac. In the case in which fuel existed in the sac, pin-like structure spray formation was observed at the initial injection stage. This phenomenon was not observed in the case in which no fuel was present in the sac, and a widely spread fuel spray formation was observed at the initial injection stage. The relatively low-speed fuel spray injected in the initial low-sac-pressure condition was pushed away by the subsequent fuel spray injected in the high-sac-pressure condition. 7 refs., 12 figs., 1 tab.

Stability of diffusion flame formed in a laminar flat plate boundary layer. Effect of fuel dilution; Soryu heiban kyokai sonai ni keiseisareru kakusan kaen no anteisei. Nenryo kishaku no eikyo

Energy Technology Data Exchange (ETDEWEB)

Takeuchi, M [National Institute for Resources and Environment, Tsukuba (Japan); Ueda, T; Mizumoto, M [Keio University, Tokyo (Japan). Faculty of Science and Technology; Amari, T [Keio University, Tokyo (Japan)

1998-10-25

A stability limit of the diffusion flame with fuel injection from a porous wall in a laminar flat plate boundary layer is measured as functions of fuel (CH4) concentration of CH4/N2 injectant mixture ({chi}) and its injection velocity (v). The free stream velocity (U{infinity}) is set as 0.6 m/s. The thermal condition at the wall is controlled by setting temperature at the upstream end of the porous wall as a reference temperature. When v >20 mm/s, the flame becomes unstable with the separation of leading flame edge with decreasing {chi}. The value of {chi} at the stability limit is constant without regard to v as long as the wall temperature is kept constant. As the wall temperature is decreased the value of {chi} increases. The separation is supposed to take place as a result of the limit of the reaction rate. When v <20 mm/s, the flame becomes unstable with the oscillation. The value of {chi} at the stability limit increases drastically with decreasing v. The oscillation takes place mainly due to the repeat of the extinction due to heat loss to the wall and the flame propagation in the combustible layer. 10 refs., 8 figs., 1 tab.

Effect of sail on augmenting attitude stability of hovering VTOL vehicle supported by one-ducted-fan. Ductedter dot fan shiji VTOL ki no hover shisei anteisei eno ho no eikyo

Energy Technology Data Exchange (ETDEWEB)

Ando, S.; Kato, M. (Nagoya University, Nagoya (Japan). Faculty of Engineering)

1991-07-05

An analytical investigation was given on augmenting attitude stability of a VTOL airplane supported by one-ducted-fan, at hovering, by means of installing a sail having air resistance on a place higher than the vehicle center-of-gravity. Since the problem becomes nonlinear, the time-marching technique was used. The sail on which the emphasis was placed had an area of as less than several times as much of the duct sectional area, and a height of as less than several times as much of the duct diameter. The stabilization effect is expressed as {Delta}h = center of gravity height region providing the stability/duct diameter. Without a sail, {Delta}h was several percent, but with a sail, the value increased to about ten times as much. This increase in {Delta}h was remarkable in the direction that elevate the position of the center of gravity. More stability is obtained by increasing the sail height than by increasing the area. Substitutes to a sail, working on the same principle, could be a gas-bag and wind mill. A gas-bag, which can change its volume readily, will be able to vary the sail area easily. A wind mill could make the weight lighter than a sail, and has a possibility of varying the resistance through changing its blade pitch angle. 2 refs., 2 figs., 1 tab.

Fiscal 1998 research report on the basic study on the effect of microgravity on living individuals; Bisho juryoku no seibutsu kotai ni taisuru eikyo no kiso kenkyu 1998 nendo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In order to clarify the effect of microgravity on vital functions and organisms at a cell level, this research studies the molecular biological response function of higher animals, the gravity acceptable mechanism of single-cell organisms, the effect of gravity on geotaxis of insects, measurement of monoamine system neurotransmitters of rat hippocampus by dialysis in a brain and the effect of microgravity on it, the effect of microgravity on water and bone metabolism functions and immunity function, and the analysis of BZ reaction as a simple model of vital reaction. The themes of the research are as follows: the effect of microgravity environment on cell fusion, the analysis of gravity acceptable mechanisms of single-cell organisms, the effect of oriental medical treatment on bone metabolism anomaly of mouses under microgravity environment, the effect of oriental medical treatment on change in physiological function under microgravity environment, the effect of microgravity environment on immunity systems, the effect of gravity on cell activities, the effect of a gravity field on chemical oscillation reaction, and the effect of gravity on geotaxis of insects. (NEDO)

Effect of coal rank and mineral matter on gasification reactivity of coal char treated at high temperature; Netsushorishita sekitan char no gas ka tokusei ni taisuru tanshu oyobi kobutsushitsu no eikyo

Energy Technology Data Exchange (ETDEWEB)

Morishita, K.; Takei, H.; Harano, A.; Takarada, T. [Gunma University, Gunma (Japan). Faculty of Engineering

1996-10-28

In the wide range from brown coal to anthracite, an investigation was made of effects of heat treatment on physical/chemical properties and of coal rank dependence. For the experiment, 12 kinds of coal samples were used, and for heat treatment, the fluidized bed heated by the electric furnace and the infrared-ray gold image furnace were used. To examine characteristics of the heat-treated coal char, conducted were oxygen gasification, TPD measurement, XRD measurement, alkali metal measurement, and pore distribution measurement. The following were obtained from the experiment. The gasification reaction rate of the char heat-treated in the temperature range between 900{degree}C to 1700{degree}C decreases with a rise of the temperature of heat treatment, and the degree of decrease in the rate depends on coal rank. The order of gasification rate between coal ranks depends on the temperature of heat treatment, and the lower the heat treatment temperature is, the more largely the gasification rate is influenced by catalysis of mineral matters included in the coal. As causes of the decrease in gasification rate associated with the rise in temperature of heat treatment, indicated were release of alkali metal having catalysis and decrease of active sites by carbonaceous crystallinity. 6 figs.

Reduction of artificial source effect in the high-resolution aeromagnetic survey in the Hanshin region; Hanshin chiiki no komitsudo kuchu jiki tansa ni okeru jinko noise source no eikyo no jokyo

Energy Technology Data Exchange (ETDEWEB)

Nakatsuka, T; Makino, M; Morijiri, R; Okuma, S [Geological Survey of Japan, Tsukuba (Japan)

1997-05-27

A high-resolution aeromagnetic survey was carried out in December 1995 on areas from Kobe City to Kyoto City in relation to the Hyogoken-nanbu Earthquake in 1995. It was found in the survey that effects of electric trains driven by direct current and man-made structures cannot be avoided, working as a large noise factor in extraction and analysis of geological information. This paper describes a quantitative analysis on magnetic anomaly suspected to have been caused from artificial sources seen in the magnetic map of the Hanshin area obtained from the above exploration data. The paper also gives considerations on methods to remove the effects therefrom. It then describes a quantitative analysis and the result of attempts on removal of the anomaly, taking up the following factors: (1) distribution of specific and remarkable magnetic anomalies which correspond to railroad positions of the Hanshin Railways running through the Nishinomiya-Toyonaka area, (2) the magnetic anomaly trend in positive and negative pair seen in the seafront area of Kobe City, and (3) typical bipolar isolated type magnetic anomaly in the north-west part of Kobe City. The cause for (1) was loop current flown for the railway operation, that for (2) was man-made structures in the improved seafront area, and that for (3) was a provisionally built metal waste storage yard. 9 figs.

Effect of heat generation from bone cement on bone tissue in total knee arthroplasty; Jinko kansetsu okikaeji no one cement no hatsunetsu ga seitai soshiki ni oyobosu eikyo ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Matsuda, M.; Uchida, T. [Kobe University, Kobe (Japan); Iwatsubo, T. [Kobe University, Kobe (Japan). Faculty of Engineering; Kurosawa, M.; Hashimoto, Y. [Kobe University, Kobe (Japan). Faculty of Medicine; Fukushima, H.

1998-01-25

Bone cement is often applied to fix the components in a surgical operation, such as TKA (total knee arthroplasty). In this paper, we consider the effect of heat generation from bone cement on bone tissue in TKA by using numerical simulation. First, we applied an axisymmetric model of tibia to finite element method and analyzed heat generation of bone cement. To confirm the results of analysis by experiment, we measured the temperature determined by 6 points i.e., 2 points each in component-cement interface, cement and bone-cement interface. As a result, the temperature determined by analysis agrees with that determined by experiment. Next, we proposed the evaluation formula of the bone necrosis. We constructed a bone necrosis map from the simulation. From the map, we found that the bone necrosis region was about 2 mm from the bone-cement interface. In addition, the bone necrosis is severe at the base of the tibial component. 7 refs., 15 figs., 3 tabs.

WE-NET substask 3. Conceptual design of the total system (City-level energy estimation and assessment); 1998 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET). 3. Zentai system gainen sekkei (toshi kibo deno yosoku hyoka)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The effort of fiscal 1997 at isolating the best way to introduce a relatively small amount of hydrogen into urban fuel economy was carried over to fiscal 1998. In the research of fiscal 1998, comparison was made between Tokyo and London in connection with hydrogen introduction, and a transition scenario was proposed for introducing hydrogen into Tokyo. Models were built for Tokyo and London, and studied. The result of this study was different from that obtained in the previous study, and places the two cities under similar conditions. The difference is attributed to the rapid progress in the development of the fuel cell and to the resultant reduction in cost. It is inferred that, in consideration of the transportation situation, the introduction of pure hydrogen will be the most cost-effective for both cities at least for some time to come. According to the revised data, natural gas may be procured in Tokyo as in London but the size of supply available in Tokyo is fairly smaller than that in London. Several transition scenarios covering the period up to 2025 were subjected to discussion. (NEDO)

Effect of Al content on critical CTOD properties in heat affected zone of C-Mn microalloyed steel. Teitanso teigokin koyosetsu netsu eikyobu no genkai CTOD tokusei ni oyobosu Al ganyuryo no eikyo

Energy Technology Data Exchange (ETDEWEB)

Fukada, Y.; Komizo, Y. (Sumitomo Metal Industries Ltd., Osaka (Japan))

1992-08-05

Two types of molten alloys specimen with a base of 0.10%C-0.20%Si-1.40%Mn-0.01%Ti system and varied Al content, were studied. The critical crack tip opening displacement(CTOD) properties in heat effected zone(HAZ) of extreme low Al content steel was stable at. extremely low temperature and there was no formation of M-A. Fine ferrite has a texture of [alpha] main body and it has been thought that the the change in the CTOD properties with the variation in Al content has been due to the difference in the texture. In case of Al content steel plate, the interfacial energy has been decreased due to excessive carbon concentration at [gamma] /[alpha] interface, M-A formation has been easier by the suppression of [alpha] transformation. In case of extremely low Al content steel plate, [alpha] transformation has been promoted and cementite deposition has been estimated from a small amount. of left [gamma] of extremely high carbon concentration. As for SH-CCT diagram of extremely low Al content steel plate, compare to Al content steel plate, [alpha] noze has shifted toward shorter time and formation of [alpha] has been easier within the normal welding cooling rate, and microstructures of [alpha] texture have formed in HAZ. 21 refs., 12 figs., 1 tab.

Influences of species of metals and supports on the hydrogenation activity of carbon-supported metal sulfides catalysts; Tanso biryushi tanji shokubai no suisoka kassei ni taisuru kassei kinzoku oyobi tantaishu no eikyo

Energy Technology Data Exchange (ETDEWEB)

Sakanishi, K.; Hasuo, H.; Taniguchi, H.; Nagamatsu, T.; Mochida, I. [Kyushu University, Fukuoka (Japan). Institute of Advanced Material Study

1996-10-28

In order to design catalysts suitable for primary liquefaction stage and secondary upgrading stage respectively in the multi-stage liquefaction process, various carbon-supported catalysts were prepared. Catalytic activities of them were investigated for the hydrogenation of 1-methylnaphthalene, to discuss the influences of metals and carbon species on the catalytic activity. Various water soluble and oil soluble Mo and Ni salts were used for NiMo supported catalysts. Among various carbon supports, Ketjen Black (KB) was effective for preparing the catalyst showing the most excellent hydrogenation activity. The KB and Black Pearl 2000 (BP2000) showing high hydrogenation activity were fine particles having high specific surface area more than 1000 m{sup 2}/g and primary particle diameter around 30 nm. This was inferred to contribute to the high dispersion support of active metals. Since such fine particles of carbon exhibited hydrophobic surface, they were suitable for preparing catalysts from the methanol-soluble metals. Although Ni and Mo added iron-based catalysts provided lower aromatic hydrogenation activity, they exhibited liquefaction activity competing with the NiMo/KB catalyst. 3 refs., 1 fig., 3 tabs.

Fiscal 1999 survey report. Survey of environmental effect pertaining to survey for geothermal development and promotion (Hakusuigoe area); 1999 nendo chinetsu kaihatsu sokushin chosa no uchi kankyo eikyo chosa (Hakusuigoe chiiki) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This survey of environmental effect was intended to grasp actual state concerning some environmental factors that should agree with survey/development and also to assess its effect on the surrounding environment, particularly as a part of the 'stage C' in the 'survey for geothermal development and promotion', which was implemented by the Government for the purpose of guiding geothermal development by enterprises. This report compiles the plan details of the environmental effect survey to be conducted in the Hakusuigoe district, and presents proposals. The survey area is in the north of Makizono-cho, Aira-gun, in Kagoshima prefecture and situated about 3 km west of Onaminoike in Karakunidake, one of the peaks in the Kirishima mountain range. The Ogiri geothermal power plant is in the west of the site, a tourist spot Ebino Heights about 4 km northeast, and the Kirishima hot-spring about 4 km southeast. The location is in the national park, with a part designated as No. 2 and 3 class special areas. The environmental effect survey was divided broadly into such categories as fauna/flora, hot-spring water alteration and inland water, landscape, noise/vibration/subsoil, and air/water, and was further subdivided in accordance with the actual operations. (NEDO)

Study on the performances of handling and stability influenced by the differential terms in the state variables; Soansei ni okeru jotai hensunai no bibun yoso ga seino ni oyobosu eikyo no kento

Energy Technology Data Exchange (ETDEWEB)

Sugasawa, F [Tamagawa University, Tokyo (Japan); Mori, H [Nissan Motor Co. Ltd., Tokyo (Japan)

1997-10-01

The analysis method using the system matrix for state variables can not be applied to the analysis for the system has Complex Cornering Stiffness. The reason is there are differential terms in the state variables. It is found that the differential terms m the state variables can be changed to the constant terms in another state variables. 4 refs., 9 figs.

Influence on driver fatigue of vertical vibrations over long distances. Assessment in terms of stress hormones; Driver no unten hiro ni okeru joge shindo no eikyo. Stress hormone wo shiyo to shite

Energy Technology Data Exchange (ETDEWEB)

Taguchi, T.; Inagaki, H. [Toyota Central Research and Development Labs., Inc., Aichi (Japan)

1998-05-01

Driving tests are conducted to obtain some indexes that describe the cumulative effect of the sense of tiredness. The heart rate, Mayer wave related sinus arrhythmia, respiratory sinus arrhythmia, urinary adrenaline, noradrenaline, and cortisol in saliva are tested. Adrenaline and Mayer wave related sinus arrhythmia are ultimately named in view of their correlation with tiredness. It is believed that tiredness is attributable to two factors, which are increase in mental stress and decrease in vigilance. An excitation test is then conducted using a motion simulator. Upon application of 4Hz vibrations (equivalent to the chest section resonance frequency), adrenaline increases sharply, and then decreases sharply upon termination of excitation. Upon application of 1.6Hz vibrations (equivalent to the head section resonance frequency), adrenaline increases but not sharply, and the elevated level is sustained for some time after excitation. Driving tests are next conducted using a vehicle with its suspension fixed and another with 1-2Hz vibrations reduced. Rise in the adrenaline level is found inhibited aboard the latter. No difference is detected in terms of Mayer wave related sinus arrhythmia between the two vehicles. 4 refs., 7 figs., 4 tabs.

Fiscal 1998 survey for geothermal energy development promotion. Environmental impact survey report (No. B-7 Kuwanosawa region); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.B-7 Kuwanosawa chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-09-01

This survey aims to learn the current states of environmental factors required for the comprehension of the impacts on surroundings of a structural boring for geothermal energy exploration. The target site is an approximately 10km{sup 2}-large area located among the mountains 20km south-south-east of Yuzawa City, Akita Prefecture. It is found that numerous animals and vegetables inhabit the Kuwanosawa region and its vicinity. They are 19 species of mammals in 10 families under 5 orders; 73 species of birds in 25 families under 10 orders; 6 species of reptiles in 13 families; 9 species of amphibians in 6 families under 2 orders; and 719 species of insects in 179 families under 17 orders. Valuable animals include flying squirrels, mandarin ducks, black salamanders, and small Gifu butterflies. There are 670 species of vegetables in 132 families. Valuable vegetables are Iinuma bulblets, wild rhubarb roots, and Amur adonises. Floras found in existence are a natural flora in the beech class area, compensatory flora in the beech class area, afforested area, and a flora in the crop land. No remarkable fluctuation was observed in the Takamatsu spa throughout the survey period. Fluctuations were observed in all the survey items at the Doroyu-Okuyama inn. (NEDO)

Fiscal 1993 technological survey report. R and D project for industrial science and technology (R and D of quantum functional device - studies on technological prediction); 1993 nendo ryoshi kino soshi no kenkyu kaihatsu (gijutsu yosoku kenkyu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

Researches are in progress with a view to establishing fundamental technology for a quantum functional device, which engineeringly uses various quantum mechanical effects emerging in a ultrafine dimentional area, for the purpose of contributing to the micro electronics technology that deals with ultra high speed and ultra high functional information processing necessitated in an advanced information-oriented society. Survey on research activities was conducted concerning the peripheral technologies of a quantum functional device project, for example, related technologies such as a high temperature scanning tunneling microscope enabling preparation of a micro structure of nm order, and an ultra high vacuum CVD device. In addition, discussions were held on the subjects of preparation/evaluation technology of a quantum functional device and a single electronic device, with the purpose of predicting/judging, from a wider viewpoint, indications of unexpected research results of the R and D in the remarkably evolving field of quantum functional devices, quickly taking the indications into projects, and efficiently promoting the R and D by making sure of the directions to proceed. (NEDO)

Few studies of the effect of diluents on extraction of cobalt with D2EHPA. D2EHPA ni yoru Co no chushutsu ni ataeru kishakuzai no eikyo ni kansuru jakkan no kento

Energy Technology Data Exchange (ETDEWEB)

Aranae, M.; Nakataka, Y.; Wakamatsu, T. (Kyoto Univ., Kyoto (Japan). Faculty of Engineering); Saito, I.; Sakamoto, H. (Environment Research Inst. Resources Technical Tsukuba (Japan))

1991-12-27

Study was made on extraction of cobalt from weak acid solution with di-(2-ethylhexyl) phosphoric acid (D2EHPA) using various polar diluents such as benzene, toluene, o-xylene, m-xylene, n-heptane, cyclohexane and n-hepatne-benzene mixtures. Extraction efficiency of cobalt has decreased in the order, n-heptane > cyclohexane > m-xylene > o-xylene > toluene > benzene and this order has been in good agreement with the decreasing order of solubility parameters of diluents,and has shown the possibility of application of regular solution theory. When n-heptane and cyclohexane as diluents, in low loading ratio(L),were used Co-D2EHPA polymer were formed compared to other diluents. On the other hand when mixture of n-heptane/benzene was used as diluent, the efficiency of extraction, salting-out effect and formation of Co-D2EHPA polymer has changed with the texture of mixture.This change may be due to the effect of L and it has been thought for the necessity of investigation of extraction of cobalt in low polar diluents. 13 refs., 5 figs., 2 tabs.

FY 1998 geothermal development promotion survey. Report on the environmental effect survey (No. A-4 Kunbetsu-dake area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.A-4 Kunbetsudake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-09-30

Of the FY 1998 geothermal development promotion survey, the primary environmental effect survey in the Kunbetsu-dake area was conducted, and the results were arranged. In the well drilling survey, etc., the survey was made aiming at extracting areas to be preserved from an environmental aspect. The results of the survey were summarized as follows: As to the mammalia, 12 families 46 species were confirmed in the area surveyed and the periphery by literature survey. Out of them, the noticeable species which are considered important from an academic viewpoint are 10 families 19 species. As to the aves, 55 families 340 species were confirmed, of which 29 families 79 species are noticeable species. About the amphibia/reptilia, 3 families 3 species in the amphibia and 4 families 6 species in the reptilia were confirmed by literature and hearing survey. The noticeable species is 1 family 1 species in the amphilia. Concerning the terrestrial insecta, 135 families 873 species were confirmed, and the noticeable species is 11 families 20 species. As to the flora, 115 families 1055 species were confirmed, and the noticeable species is 46 families 126 species. Relating to the living vegetation, the one higher than 9 in nature reserves shows a substantial rate, and the periphery of Kaibetsu-dake is designated as the specified flora colony. (NEDO)

Effects of sand compaction pile (SCP) driving on the strength of clay outside the improved area; Sand compaction pile no dasetsu ga jiban kairyo ikigai no nendo jiban no kyodo ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Matsuda, H. [Yamaguchi University, Yamaguchi (Japan); Takahashi, S. [Ministry of Transport, Tokyo (Japan); Fujiwara, K. [Penta-Ocean Construction Co. Ltd., Tokyo (Japan); Kitayama, N. [Fukken Co. Ltd., Hiroshima (Japan)

1998-06-21

This paper describes effects of the disturbance by the sand compaction pile (SCP) driving operations on the shear strength of clay outside the improved area and the border of region affected by the SCP driving. About 1,400 soil specimens were taken before and after the SCP driving inside and outside the improved area during the foundation improvement at Tokuyama-Shimomatsu Port in Yamaguchi Prefecture. Soil test data of the specimens and strength characteristics of disturbed clay specimens were investigated through the laboratory experiments. The results obtained are as follows. According to the multi-directional simple shear test results, the shear strength immediately after the cyclic shear decreased in 10 to 30% compared with that before the cyclic shear. When recompaction was conducted before the cyclic shear, however, it increased in 50% compared with that before the cyclic shear. The strength of clay decreased by the SCP driving even outside the improved area. When the internal frictional angle of clay, friction coefficient of the improved boundary and driving depth of SCP were determined, it was possible to estimate an area affected by the SCP driving using a combined sliding plane. 21 refs., 18 figs.

Effect of aluminum on the growth and nutrient uptake in cryptomeria japonica D.Don and Chamaecyparis obtusa Sieb. et Zucc.; Sugi oyobi hinoki no ikusei to yobun kyushu ni oyobosu aluminium no eikyo

Energy Technology Data Exchange (ETDEWEB)

Kono, Y; Matsumura, H; Kobayashi, T [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1995-09-10

Two-year-old seedlings of Sugi (Japanese cedar: Cryptomeria japonica D. Don) and Hinoki (Japanese cypress: Chamaecyparis obtusa Sieb. et Zucc.) were grown for 4 months in 1/5 Hoagland`s No.2 nutrient culture solution containing aluminum chloride in the concentration range of 0.5 to 20 mM within the pH range of 3.5 to 4.0. Aluminium supplied at or below 1 mM of Al had no effect on the mortality of these species. However, the increase Al concentration higher than 2 mM increased the mortality. While they showed significant growth reduction at or higher Al concentration of 5 mM, there were no difference in growth response to Al between the two species in this experiment. While Al contents in leaf and root significantly increased with increasing Al concentration in the solution, contents of Ca, Mg and P in leaf decreased. Roof p content in Sugi increased with the increase of Al concentration in the solution, while no such change was observed in Hinoki root. This result suggests that Al might make phosphate immobile or inviolable form in Sugi root and this might lead to the reduced translocation of P into the leaf. In contrast, Al did not interfere with the uptake of phosphate in the root, however, it might interrupt phosphate transport into leaf from root system in Hinoki. The Al concentration such as 5 mM in the root sphere induced growth reductions in Sugi and Hinoki, with no significant difference in the response between the two species. This concentration was much higher than those reported in the field crops, vegetables and/or herbs. Thus, if soil acidification will be induced by acidic deposition in future, these herbaceous plants will be influenced faster than the conifer trees. This also means that ground vegetation change will be observed earlier than the conifer decline by the soil acidification stress. 23 refs., 5 figs., 3 tabs.

Study on turning performance of four-track steering vehicles. Effect of traction force and track speed distribution control; Sodashiki sokisha no senkai seino ni kansuru kenkyu. Kudoryoku haibun to sokudo haibun no eikyo

Energy Technology Data Exchange (ETDEWEB)

Imamura, M; Watanabe, K; Kitano, M [National Defense Academy, Kanagawa (Japan)

1997-10-01

The four-track steering vehicles (4TS) is a new type of off-road vehicle which can replace four wheels with track units to improve the mobility on soft terrains. In this paper, the numerical simulations, under the various types of differential and track velocity control systems, are conducted to predict the turning performance and steer ability of the 4TS vehicles. The results of the numerical analysis demonstrate that the differential systems with realistic combined distribution control systems of the track speed is efficient at a small turning radius. 4 refs., 13 figs.

Effects of types of work and visual environemnt on human pschology and behavior in an office space. Shikankyo ga shitsumusha no shinriter dot kodo ni oyobosu eikyo sagyo naiyo no chigai ni yoruhyoka

Energy Technology Data Exchange (ETDEWEB)

Sato, M [The Tokyo Electric Power Co. Inc., Tokyo (Japan); Inui, M., Nakamura, Y. (Tokyo Institute of technology, Tokyo (Japan))

1991-10-30

In this paper, was investigared an effect of work and visual environment types on the psychology and behavior of workers in office spaces in terms of subjective appraisal, work performance, behavior pattern, etc. In order to make a such effect of visual environment clear, a series of factorial experiments were conducted. Window and interior decoration of pot plants and paintings were adopted as factors of the visual environment. A Krepelin addition, a Krepelin addition-subtraction and multiplication, a Krepelin machiene, a hand-written manoscript, a word-processed manuscript, and a mirror tracing were adopted as work types. The number of sobjects was five for each work type. Consequently, a significance of the effect of the window and interior decoration on workers was verified. It was also found that the presence of the window and interior decoration improved the work performance for the major types of perfomance test. Furthermore, it was revealed that the presence of the window ans interior decoration the behavior of subjects active. 11 refs., 11 figs., 9 tabs.

FY 1999 report on the study/survey of how to spread clean energy vehicles and let people know them and the method for it; 1999 nendo chosa hokokusho. Clean energy jidosha fukyu keihatsu no arikata oyobi fukyu keihatsu shuho kento chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of letting the general public widely know of clean energy vehicles (electric car, hybrid car, natural gas car and methanol car) and making more effective/more efficient spread of them, investigational study was made of the method to spread them and let people know them. For the spread, it is important to confirm the feedback of information from the persons for PR at the time of conducting PR activities. As to the method using TV, radio, newspaper, magazine, etc., the following are pointed out: only a few information can be appealed; there is a possibility of the information being buried in a lot of other information; it seems difficult to get timely response. For this project, town events and exhibition events were considered suitable, and the results of the effects/efficiencies expressed in the actual figures by carrying out 'Clean Energy Festa' were studied. As a result, comprehension of 'new energy' and 'clean energy vehicle' and changes in the attitude were confirmed through the questionnaire survey, etc. (NEDO)

FY 2000 report on the investigational study of the general PR method for spreading clean energy vehicles and letting people know them; 2000 nendo chosa hokokusho. Clean energy jidosha fukyu keihatsu no tameno ippan koho shuho ni kansuru kento chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The details were outlined of the PR event 'Clean Energy Festa' which was carried out for PR activities for spread of new energy and clean energy vehicles. The festa was implemented in Yokote (Akita prefecture), Nagoya, Osaka, Yokohama and Hiroshima. The details of each place were reported in terms of the following: outline of the implementation, map of the place and booths, opening ceremony, management at entrance, dome theater, place for enjoying/relaxing, festival plaza, parking lot, PR related works, etc. In Festa in Yokote, more people gathered than expected. The reasons seem to be: the festa was held in the existing amusement facilities; the show using costumes of popular characters and gifts of the lottery were effective. As to new energy and clean energy vehicles, appeal was made mainly by stamp rally and questionnaire survey. By moving people inside the place, it helped people to have an understanding of clean energy vehicles. Almost the same effects were recognized also in the other places. (NEDO)

FY 2000 report on the investigational study of the general PR method for spreading clean energy vehicles and letting people know them; 2000 nendo chosa hokokusho. Clean energy jidosha fukyu keihatsu no tameno ippan koho shuho ni kansuru kento chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The details were outlined of the PR event 'Clean Energy Festa' which was carried out for PR activities for spread of new energy and clean energy vehicles. The festa was implemented in Yokote (Akita prefecture), Nagoya, Osaka, Yokohama and Hiroshima. The details of each place were reported in terms of the following: outline of the implementation, map of the place and booths, opening ceremony, management at entrance, dome theater, place for enjoying/relaxing, festival plaza, parking lot, PR related works, etc. In Festa in Yokote, more people gathered than expected. The reasons seem to be: the festa was held in the existing amusement facilities; the show using costumes of popular characters and gifts of the lottery were effective. As to new energy and clean energy vehicles, appeal was made mainly by stamp rally and questionnaire survey. By moving people inside the place, it helped people to have an understanding of clean energy vehicles. Almost the same effects were recognized also in the other places. (NEDO)

Fiscal 1998 research report on International Clean Energy Network using Hydrogen Conversion (WE-NET). Subtask 3. Prediction evaluation on a national scale; 1998 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET) sub task. 3. Ikkoku kibo deno yosoku hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Japanese long-term energy demand and various energy use styles were simulated from the viewpoint of a profitability and environmental preservation, and hydrogen consumption was studied. In the research in fiscal 1998, the data on available primary energy was modified based on the upper limit of CO{sub 2} emission by COP3, and the long-term energy supply and demand outlook of Advisory Committee for Energy in June, 1998. The result of scenario analysis is as follows: (1) The reference scenario showed that reduction of a hydrogen price is indispensable to use imported hydrogen, (2) The carbon externality scenario showed that market penetration of hydrogen can be large if the carbon externality amounts to $300/t-C, (3) The high fossil fuel price scenario showed that a fossil fuel price (in particular, price of hydrocarbon) highly affects market penetration of hydrogen, and (4) The low nuclear capacity scenario suggested that a competitiveness of hydrogen is considerably improved as an energy supply-demand-balance is tight. (NEDO)

Biochemical and toxicological impacts of persistent organochlorines on aquatic ecosystem. With particular attention to dioxins and their related compounds; Zanryusei yuki enso kagobutsu no suiken seitaikei eno eikyo. Toku ni dioxin rui ni chakumokushite

Energy Technology Data Exchange (ETDEWEB)

Iwata, H. [Hokkaido University, Sapporo (Japan)

1998-07-10

PCDDs, PCDFs and coplanar PCBs are organochlorine compounds which induce toxicological impacts on test animals, such as reduced weight, thymic gland dwarf, hepatotoxicity, immunotoxicity, developmental toxicity, carcinogenecity, teratogenicity and endocrine disturbance. They are generally referred to as dioxins. They are difficult to be decomposed in vivo, and tend to be more concentrated in higher organisms, placed at higher positions in the food chain. In aquatic ecosystems, they are observed to accumulate at high concentrations in fishes, fish-eating birds, claspers and whales. Therefore, there are growing concerns over their possible adverse effects on wild animals in aquatic ecosystems. This paper describes the effects of persistent organochlorine compounds on fishes, birds and aquatic mammals; and induction of cytochrome P450 of each organic species, caused by exposure to dioxins, and the induction examples in aquatic ecosystems. It also discusses whether or not the cytochrome P450 induction capacity of each organism species can be used as an index which explains difference between organism species in toxicological impacts of dioxins. 33 refs., 1 fig., 1 tab.

Fiscal 1999 survey report. Project of promoting international cooperation on global environments/Project of assessing climate change impacts; 1999 nendo chikyu kankyo kokusai kyoryoku suishin jigyo chosa hokokusho. Kiko hendo eikyo hyoka nado jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

As part of international cooperation concerning global warming, an assessment is conducted of climate change mitigating measures, from the viewpoints of technology, environment, economy, and community, in coordination with the IPCC (Intergovernmental Panel on Climate Change) 3rd working group responsible for energy policy and technological development. It aims to contribute to the preparation of a 3rd assessment report, and covers (1) the development of an assessment technique relating to cost analysis, (2) problems in the transfer of technology and solutions for them, and (3) the assessment of various policy options. Under item (1), studies are made about modelling techniques, common parameters and their values, potentials for effect, control of warming, etc. Under item (2), factors impeding the transfer and diffusion of technology are extracted and solutions therefor and the establishment of new incentives are deliberated, with analysis and investigation focused on tasks and solutions for furthering global transfer of technology with attention paid to various specific cases. Under item (3), concrete and feasible policy options are discussed on the basis of the outcome of the above-named endeavors, in view of characteristics of each of the regions, departments, and techniques. (NEDO)

Effect of pore water pressure on P-wave velocity in water-filled sands with partial air saturation; Fukanzen howa jotai no suna shiryo wo denpasuru P ha sokudo ni oyobosu kangeki suiatsu no eikyo

Energy Technology Data Exchange (ETDEWEB)

Kanema, T [Chishitsu-Keisoku Co. Ltd., Tokyo (Japan)

1997-10-22

With an objective to elucidate change in velocity of elastic waves in association with water pressure increase in a sand bed below the groundwater level in a shallow portion of the ground, a measurement experiment was carried out on P-wave velocity in sand samples with partial air saturation. The experiment has used fine sand having an equivalent coefficient of 2.40, a soil particle density of 2.68 g/cm {sup 3} or 60%, and a grain size of 0.36 mm. Inside the water-filled sand sample, two accelerometers were embedded 20 cm apart from each other as vibration receivers. An electromagnetic hammer for P-wave was used as the vibration source. In the experiment, measurement was carried out on the P-wave velocity in association with increase in pore water pressure by applying water pressure afresh to the water-filled sample. As a result of the experiment, the following matters were disclosed: the P-wave velocity increases as the pore water pressure was increased, and a phenomenon was recognized that the dominant frequency changes into high frequency; the degree of increase in the P-wave velocity varies depending on initial saturation of the sample; and bubbles in the pore fluid have their volume decreased due to compression resulted from increased pore water pressure and dissolution of air into the pore water. 6 refs., 11 figs.

Surface flaw detection by means of infrared radiometer. Part 3. ; Detection limit influenced by an environment temperature. Sekigai hoshakei ni yoru hyomen kekkan no kenshutsu. 3. ; Shuhen ondo ni yoru kenshutsu genkai no eikyo

Energy Technology Data Exchange (ETDEWEB)

Okamoto, U; Kaminaga, F [Ibaraki University, Ibaraki (Japan). Faculty of Engineering; Ishii, T [Ibaraki University, Ibaraki (Japan); Eto, M; Ooka, N; Kanaya, K; Eto, Y [Japan Atomic Energy Research Institute, Ibaraki (Japan); Kurokawa, T [Nippon Denki Sanei Ltd. Co., Tokyo (Japan)

1990-12-20

Measuring a radiation energy distribution around surface flaw by means of a infrared rediometer can detect fine flaw on the surface. The characteristics were examined using a light quantum type radiation thermometer consisted of Hg-Cd-Te as a sensor. A surrounding wall consisted of a black body wall was installed between the sensor and test piece, and by thus maintaining the surrounding wall temperature constant, reflection energy from the test piece surface was maintained constant for stabilized measurement. The measurement values are the sum of energies from emission and reflection, or the so-called radiosity values. To avoid effects from the reflection to reduce variance in the emissivity, it is necessary to keep the surrounding wall temperatures lower by more than 20 {degree}C than the test piece radiation temperatures. Emissivity can be calculated from the rediositivity (sum of the radiation and the reflection), the surrounding wall temperatures, and the test piece radiation temperatures. If the surface is rough, variance in the measurements increases. The larger the difference in the test piece and surrounding wall temperatures, the thermo image of the defects on the test piece surface becomes more distinctive, thus the detection limit can be enhanced. 7 refs., 13 figs.

Effects on annual cost of solar/air-heat utilization system of carbon tax and interest rate for a residential house; Jutakuyo taiyo/taikinetsu riyo system no nenkan keihi ni oyobosu tansozei kinri no eikyo

Energy Technology Data Exchange (ETDEWEB)

Shen, Q; Kenmoku, Y; Sakakibara, T [Toyohashi University of Technology, Aichi (Japan); Nakagawa, S [Maizuru National College of Technology, Kyoto (Japan); Kawamoto, T [Shizuoka University, Shizuoka (Japan). Faculty of Engineering

1996-10-27

In recent years, a system has been proposed that utilizes river heat, air-heat, exhaust heat from a cooler, etc., in addition to natural energy for the heat pump. With the introduction of such system, the amount of energy used and that of CO2 exhaust will be greatly reduced, but annual expenses will be increased as it stands. In order to improve the cost efficiency of the system, a proposal has been made for the introduction of an economic policy such as the carbon tax and a low interest financing system. With these matters in the background, the subject study predicts the production of solar cells in the future and, on the basis of this production, determines the price, conversion efficiency and equipment energy of solar cells in the future. Using these values and taking into consideration the introduction of the carbon tax and the low interest financing system, the optimum area was determined for solar cells and heat concentrators in a future residential solar/air-heat energy system. The carbon tax, being imposed on all CO2 discharges, had a large effect. Moreover, as the tax increased, annual expenses decreased for the solar/air-heat system. 3 refs., 6 figs.

Fiscal 1998 research report on promotion of geothermal development. Environment impact research report (No. A-4 Kunbetsu-Dake area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.A-4 Kunbetsu chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-06-01

For extracting the areas to be conserved from the viewpoint of environment for the research on geothermal well drilling, the environment impact research was made on the protection and regulation states of animals and plants in Kunbetsu-Dake area. 46 species in 12 families of mammals were confirmed in/around the area by document survey, and among them 19 species in 10 families of mammals were important academically. 340 species in 55 families of birds were confirmed, and among them 79 species in 29 families of birds were important academically. 3 species in 3 families of amphibians, and 6 species in 4 families of reptiles were confirmed, and among them 1 species of amphibian was important. 873 species in 135 families of land insects were confirmed, and among them 20 species in 11 families were important. 1055 species in 115 families of plants were confirmed, and among them 126 species in 46 families were important. Most of vegetation was 9 or more in degree of naturalness. The peripheral area of Kaibetsu-Dake is the plant colony area specified by the 2nd basic survey on natural environmental conservation (Environment Agency). (NEDO)

Report on fiscal 2000 geothermal development promotion survey. No. C-5 Appi district environmental impact survey (1st phase); 2000 nendo chinetsu kaihatsu sokushin chosa hokokusho - No.C-5. 1. Appi chiiki kankyo eikyo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-08-01

For the survey of weather in the Appi district, Iwate Prefecture, observation data covering the last decade were collected at weather stations and the like, and characteristics of weather, climate, and natural earthquakes were learned. In the survey of fluctuation in the spa water level, studies were made about fluctuation in water temperature, spring water, and river water, and basic data were collected for the examination of the impact to be generated by geothermal exploration well boring and short-term discharge tests. In the survey of animal and vegetables, the habitation and distribution of animals and vegetables at sites planned for geothermal well boring were investigated, and data were collected for the evaluation of the impact to be imposed on them by well boring or the like. In the survey dealing with nature conservation and landscape, laws and regulations governing nature conservation were collected and put in an easy-to-use order, and seasonal changes in the natural landscape were photographed and recorded. In the survey of noise/vibration and ground fluctuation, the background values were measured prior to the implementation of geothermal well boring, discharge tests, and so forth. (NEDO)

Effect of temperature on degradation of musty odour compound producing by cyanobacteria, Phormidium tenue by microflagellate, Monas guttula; Benmochu Monas guttula ni yoru kabishu sansei sorui Phormidium tenue no bunkai ni oyobosu ondo no eikyo

Energy Technology Data Exchange (ETDEWEB)

Lee, B.; Sudo, R. [Tohoku University, Sendai (Japan). Faculty of Engineering; Sugiura, N. [Ibaraki Prefectural Waterworks, Ibaraki (Japan); Inamori, Y.; Nishimura, O. [National Inst. for Environmental Studies, Tsukuba (Japan); Higashi, T. [University of Tsukuba, Tsukuba (Japan). Institute of Applied Biochemical

1998-04-10

Biodegradation characteristics of cyanobacteria, Phormidium tenue and its metabolites, 2-methylisoborneol (MIB) by protozoan microflagellate, Monas guttula, and the effect of temperature on them were examined in batch culture experiment. The flagellate was found to predate on P. tenue favorably as a food source within a wide temperature range from 10degC to 30degC. Specific growth rate ({mu}) and generation time (t{sub d}) of the flagellate were 4.6 day{sup -1} and 3.5 h{sup -1}, respectively at 20degC and 30degC, whereas in the case of 10degC the lag values of {mu} and t{sub d} were obtained by 1.9 fold in comparison with the removal ratio of 61% at the first cultivation day and that of 99% at the 2nd day at 30degC, while at 20degC the removal was only about 30% in the first day, but P. tenue could be perfectly reduced at the 2nd day. Although the reduction rate of the P. tenue was slow at the lower temperature of 10degC, the removal reached 98% in the 7th day. Removal rate of P. tenue by the flagellate increased with the increase in temperature and reached the maximal value with 4.0 h{sup -1} at 30degC. The flagellate could contribute to the degradation of MIB, although the degradation was lower than that of P. tenue. It was found that the microflagellate could favorably predate on P. tenue and degrade its metabolite, MIB emitting musty odor in a wide range of temperature. 27 refs., 8 figs., 3 tabs.

FY 1998 geothermal development promotion survey. Report on the environmental effect survey (animals/plants, No. B-7 Kuwanosawa area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (doshokubutsu, No.B-7 Kuwanosawa chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This survey was conducted to estimate effects of drilling of geothermal exploration well on the environment, aiming at grasping the present state of environmental elements before the survey/development. As a result of the literature survey, the following distribution were confirmed in the fauna: 5 orders 10 families 19 species in the mammalia, 10 orders 25 families 73 species in the aves, 1 order 3 families 6 species in the reptilia, 2 orders 6 families 9 species in the amphibia, and 17 orders 179 families 719 species in the insecta. In the flora, a distribution of 132 families 670 species was confirmed. The results of studying the above indicated that in the fauna, there were 10 species such as antelope as valuable animal in the area surveyed and that it is necessary to pay much attention to the environmental preservation of the habitat for those animals in the well drilling associated with geothermal survey. In the flora, the 13 valuable animals selected as animal having a fear of extinction in the 'plant-version red list' were confirmed in the area surveyed and the periphery. Further, as to the plant colony, there are no important colonies in terms of preservation. In well drilling, important things are efforts exerted to restore to the original state of the area altered, prevention of the washed-away of mud water, etc., and efforts exerted to preserve the environment of vegetation. (NEDO)

Study of the oil flow and the bearing temperature in engine. Part 3. Influence of the bearing designs; Engine ni okeru jikuuke yuryo oyobi jikuuke ondo ni kansuru ichikosatsu. 3. Jikuuke sekkei yoso no eikyo

Energy Technology Data Exchange (ETDEWEB)

Watanabe, K; Kawai, K; Sasaki, S [Taiho Kogyo Co. Ltd., Aichi (Japan)

1997-10-01

It is necessary to find the bearing design so that the bearing temperature drops most efficiently by making the proper oil flow. We measured the oil flow and the bearing temperature using the narrow width bearing the bearing with small oil relief , the bearing with shallow circumferential microgrooves (the microgrooved bearing), the narrow width bearing with microgrooves. And further, we measured the variation of the oil flow every 5-15deg crank angle and searched for the efficient oil flow. As the result the bearing temperature using the microgrooved bearing dropped most efficiently. 3 refs., 13 figs., 5 tabs.

Effects of substrate concentration, specific surface area and hydraulic loading on the treatment efficiency in a submerged biological filter. Sesshoku bakkiho no shori koritsu ni taisuru kishitsu nodo, hihyo menseki oyobi suiryo fuka no eikyo

Energy Technology Data Exchange (ETDEWEB)

Iyo, T; Ono, S; Yoshino, T [Kitasato University, Kanagawa (Japan). School of Hygienic Science

1991-06-10

Effects of substrate concentration, specific surface area, and hydraulic loading, which are major factors influencing treatment efficiency in a submerged biological filter, were analyzed through the test with a special apparatus. In the test, the wall of the submerged biological filter was regarded as the contact material, and the specific surface area was changed by adjusting the sectional form of the filter. Using specimens from actual plant reservoirs, treatment efficiency for each case of three kinds of substrate concentration and hydraulic loading was measured. BOD removal rate was lower with smaller specific surface area. It was conspicuous particularly with higher BOD concentration in influent water. After the multiple regression analysis of the test results, the multiple regression equation to estimate BOD residual rate from three variates such as BOD concentration, specific surface area, and hydraulic loading was obtained. When 200mg l as BOD concentration and 50m{sup 2} m{sup {minus}3} as specific surface area were applied in this equation, the result almost agreed with the tendency obtained from data of actual plants. 6 refs., 4 figs., 1 tab.

Local approach to brittle fracture under residual stress field. Assessment of pre-loading effect; Local approach no tekiyo ni yoru zanryu oryoku wo motsu buzai no zeisei hakai kyodo hyoka. Yokaju no eikyo no hyoka

Energy Technology Data Exchange (ETDEWEB)

Yamashita, Y.; Sakano, K.; Onozuka, M. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan); Minami, F. [Osaka University, Osaka (Japan)

2000-01-01

The effect of residual stresses on brittle fracture was investigated on the basis of the Local Approach. Compressive residual stress was introduced by pre-loading and the subsequent fracture test conducted with a 780 MPa class steel. Preloading apparently increased the critical load and critical CTOD at the onset of brittle fracture initiation. The Weibull stress criterion was used to evaluate the brittle fracture resistance of the pre-loaded specimen. The critical Weibull stress is a material property independent of test conditions with and without pre-loading. Using the Weibull stress criterion, the critical CTOD of the pre-loaded specimen can be predicted from test results of the specimen without pre-loading. (author)

New concept of combustion technology in small DI diesel engines. 4th Report. Effects of fuel injection rates on MK combustion; Kogata chokufun diesel kikan no shinnensho concept. 4. Funsharitsu no MK nensho eno eikyo

Energy Technology Data Exchange (ETDEWEB)

Kimura, S; Matsui, Y; Kamihara, T [Nissan Motor Co. Ltd., Tokyo (Japan)

1997-10-01

A previous paper showed that EGR cooling and a low compression ratio which prolongs the ignition delay can expand the area of the new combustion concept. Experimental investigations were conducted in this research to examine the effects of the fuel injection rates, the injection pressure and the injection duration, on the exhaust emissions of an engine incorporating the MK concept The results showed that a higher injection pressure was effective in reducing NOx and particulate matter (PM) under MK combustion conditions. 10 refs., 9 figs., 1 tab.

Fiscal 2000 survey report. Survey for verification of new load levelling technique - IEA international joint project (Participation in IEA/DSM task); 2000 nendo fuka heijunka shuho jissho chosa hokokusho. IEA kokusai kyoryoku jigyo 'IEA/DSM task eno sanka ni tsuite'

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Japan participated in IEA/DSM (International Energy Agency/demand side management) Task X (performance contracting) for collecting information on energy service contracting business designed to promote load levelling centered DSM activities on the basis of market principles for achieving efficient operation of facilities. Task X aims to adjust and popularize the energy service contracting business. In the energy service contracting business, the facility related party and the energy service related party work under a contract to enhance efficiency of facility operation, and share the gains between them. In concrete terms, information was collected and exchanged at the 14th and 15th executive committee meeting of IEA/DSM Task X (Turkey in April 2000, Sweden in September 2000); new task preparation conference (Sweden in September 2000); 1st specialist conference (France in February 2001); and 17th annual convention of All-America ESCO (energy service company) Council (U.S. in November 2000). (NEDO)

Project in fiscal 1988 for research and development of basic technologies in next generation industries. Research and development of superconducting materials and superconducting elements (Achievement report on forecast and research of superconducting element technologies); 1988 nendo chodendo soshi gijutsu yosoku kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-03-01

With an objective to perform survey and forecast on the future of superconducting elements, collection of latest technological information and analyses of technological trends were carried out by members of the Technology Forecast and Research Committee. This paper summarizes the achievements therein. It was discovered that the Josephson element using an Al{sub 2}O{sub 3} barrier and an Nb electrode shows excellent characteristics with very good reproducibility. Trial fabrication of a four-bit micro processor was recently executed successfully by the SQUID gate using the above element. On the other hand, application of devices using high-temperature superconductors has not come out with an achievement. Although a large number of achievements have been released on mono-crystalline thin films that show good characteristics, development of substrates and barrier materials is still needed for device configuration. The method for manufacturing metal-based superconducting films has been established nearly completely as an elementary technology to develop the superconducting elements. However, making thinner the high-temperature superconducting films having been discovered recently is encountering a number of inherent problems, whereas the present stage is such that experimental discussions are being made. The process technologies, simulation, and evaluation technologies are basically the same as those for the metallic systems even for the oxide superconduction. (NEDO)

Project in fiscal 1989 for research and development of basic technologies in next generation industries. Research and development of superconducting materials and superconducting elements (Achievement report on forecast and research of superconducting element technology); 1989 nendo chodendo soshi gijutsu yosoku kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-03-01

Investigations were performed on the progress in elementary technologies common to the superconducting element technologies. This paper summarizes the achievements therein. For the most basic and important thin film technologies among the common elementary technologies, number of researches has increased as it entered in this fiscal year on the CVD process and the atomic layer control, resulting in the progress in film quality improvement and temperature reduction. With regard to the sputtering process and vacuum deposition process, findings were obtained on mechanisms and solutions for the reverse sputtering due to negative ions and oxygen activation which have been the issues. For electronic devices using high-temperature superconduction, the bridge type or tunnel type Josephson elements may be conceived. Elements for the SQUID magnetic flux meter have become to derive relatively high output by means of grain boundary bonding, suggesting a possibility of practical application in the near future. Tunnel bonding may be conceived for the switching elements, but the one operating at elevated temperatures has not been obtained. However, progress can be discovered in the proximity effects of high-temperature superconductors and silver, and the Josephson junction between high-temperature superconductors and metallic superconductors. (NEDO)

Fiscal 1997 report on the verification survey of geothermal exploration technology. 5-1. Development of the reservoir variation survey method (technology of prediction of reservoir variation); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

For the reservoir evaluation at an initial developmental stage and stabilization/maintenance of power after the start of operation, the fiscal 1997 result was described of the study of technology of prediction of reservoir variation. Using the conventional post processor, feasibilities were computed of reservoir models and behavior after the development, and gravity/self potential/resistivity variation. Variation in the seismic wave speed structure was large in travel time change distribution. The measuring accuracy of 1m sec is required to get enough detection resolving power. A conceptual design of the post processor development was conducted to study a system operated on Windows. Based on the reservoir numerical simulation technology, by taking in variation parameters such as gravity and self potentials as new model constraint conditions, the reservoir modeling technology which increased in accuracy by history matching was trially developed. Using the conventional reservoir model in the Oguni area, predictably computed were reservoir behaviors during 50 years which simulated a 20 MW development. Effectiveness of the post processor were able to be shown though influenced by characteristics such as permeability and resistivity. 74 refs., 95 refs., 12 tabs.

Project in fiscal 1989 for research and development of basic technologies in next generation industries. Research and development of superconducting materials and superconducting elements (Achievement report on forecast and research of superconducting element technology); 1990 nendo chodendo soshi gijutsu yosoku kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

With an objective to forecast the ways the future superconducting elements and the related technologies should proceed, investigations and researches were performed on the progress in research and development of high-temperature superconducting elements, and the superconduction in a wide range. This paper summarizes the achievements in fiscal 1990. The high-temperature superconducting thin film technology has made remarkable advancement. The correlation of film forming conditions with characteristics of thin films was studied by using the sputtering process, laser deposition process and CVD process, having made production of thin films sufficiently applicable to electronics possible. A technology has been developed to suppress deterioration of characteristics for high-temperature conductors in thin film patterning, surface treatment and lamination structure fabrication. However, the problem of characteristics deterioration on interface of tri-terminal elements still remain unsolved. The bonded structure elements using high-temperature superconductors is the central technology in electronics application, but such problems exist as the coherence length being short, deterioration of characteristics at interfaces, and the electric characteristics being sensitive to crystalline orientation. Technological development to overcome these problems is under way. (NEDO)

Report on the FY 1999 research survey of durability and life estimation of continuous fiber reformed ceramics base composites (CFCC); 1999 nendo renzoku sen'i kaishitsu ceramics ki fukugo zairyo (CFCC) no taikyusei to jumyo yosoku ni kansuru kenkyu chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The paper described the results of the FY 1999 research on continuous fiber reformed ceramics base composites (CFCC). As reinforced fiber, ZMI grade fiber was used. Polyzirconocarbosilane, raw material of that fiber, as matrices, was dispersed with zircon powder. The composite has remarkably more excellent heat resistance, oxidation resistance, corrosion resistance, and fracture resistance than metal, but so far there are seen no examples of the actual use. One of the causes is the shortage of the database for design of actual parts, especially, of the data on durability under actual environmental loads, and the reduction in reliability by a lack of life estimation technology. Accordingly, the basic experiments were carried out for the elucidation of environmental degradation and for the durability and development of life estimation technology. The experiments were made a step to the promotion of commercialization. As material form, minicomposite was used for unidirectional reinforcement for analytical convenience. Further, as a process to improve the durability of CFCC, minicomposite with glass seal put on was also evaluated. The experiments evaluated the residual strength after basic environmental exposure conditions, and the empirical formula for life estimation was proposed. (NEDO)

Investigations in fiscal 1983 on promotion of geothermal development. Part 1. Report on investigation of fumarolic environmental effects in Oku-Aizu area; 1983 nendo chinetsu kaihatsu sokushin chosa. 1. Okuaizu chiiki funkichu kankyo eikyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-03-01

As part of the investigations on promotion of geothermal development, surveys have been carried out in the Oku-Aizu area to identify the existence and/or extent of effects of collecting geothermal fluids above the ground imposed on the environment, such as the natural ecological system. The investigated area is an area of 60 km{sup 2} covering Kawanuma County and Onuma County in Fukushima Prefecture, a mountainous area with undulations. The investigation result may be summarized as follows: the area shows the inland climate and has snow fall as much as 2 m in winter; according to the H2S diffusion prediction, the concentration thereof on the land in seasonal average is 0.7 ppm at maximum, which is a value presenting no problems. No fumarolic effects of SO2 were identified, and floating dust and Hg showed values that present no problems. With regard to water quality during and after the blowout test, no effects of blowout return were identified. The noise level was 41 to 45 phones at a place 100 m distant, and the vibration level has become the lower detection limit at a place 50 m distant. Leveling has discovered no ground movement. No variation in major constituents in thermal spring water was verified before and after the blowout test. (NEDO)

Studies of initial stage in coal liquefaction. Effect of decomposition of oxygen-functional groups on coal liquefaction; Ekika hanno no shoki katei ni kansuru kenkyu. 3. Gansanso kannoki no bunkai kyodo to ekika hanno eno eikyo

Energy Technology Data Exchange (ETDEWEB)

Komeiji, A.; Kaneko, T.; Shimazaki, K. [Nippon Brown Coal Liquefaction Co. Ltd., Tokyo (Japan)

1996-10-28

Pretreatment of brown coal in oil was conducted using 1-methyl naphthalene or mixture of tetralin and 1-methyl naphthalene as solvent at temperatures ranging from 300 to 430{degree}C under nitrogen atmosphere. Effects of the solvent properties on the structural change of oxygen-functional groups (OFG) and coal liquefaction were investigated by means of quantitative analysis of OFG and solid state {sup 13}C-NMR measurement. When hydrogen transfer from solvent was insufficient, it was suggested that brown coal molecules loose their hydrogen to be aromatized. While, at lower temperatures ranging from 300 to 350{degree}C, hydrogen contained in brown coal molecules was consumed for the stabilization of pyrolytic radicals, and the deterioration of liquefaction was not observed. When hydrogen transfer from solvent was insufficient at higher temperatures above 400{degree}C in nitrogen atmosphere during pretreatment in oil, crosslinking like benzofuran type was formed by dehydration condensation of hydroxyl group in brown coal, to deteriorate the liquefaction, remarkably. The addition of donor solvent like tetralin decreased the formation of crosslinking like benzofuran type, which suppressed the deterioration of liquefaction. 8 refs., 5 figs.

Survey on acceleration of geothermal development in fiscal 1998. Report on survey for influence on environment (No. B-7, Kuwanosawa district); 1998 nendo chinetsu kaihatsu sokushin chosa.Kankyo eikyo chosa hokokusho (No. B-7 Kuwanosawa chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-09-01

A survey was performed on the current situation in the Kuwanosawa district in Akita Prefecture to identify influence on the surrounding environment due to drilling of geothermal structure testing wells. The survey on animals covered mammals of five divisions, 10 families and 19 species, Aves of ten divisions, 25 families and 73 species, reptiles of one division, 3 families and 6 species, Amphibia of two divisions, 6 families, 9 species, and Insects of 17 divisions, 179 families and 719 species. Precious animals of a several species including black salamander were identified. In the plant survey, 132 families and 670 species were identified, with several species listed as the precious plants. In the survey of hot springs, those at three locations were all high-temperature hot springs at as high as 53.8 to 96.9 degrees C. Amount of discharge, pH and electrical conductivity differ largely by the hot springs. The hot spring in Takamatsu did not show large variation throughout the survey period. The Ogura Inn at Doroyu Spa has small variation in pH and hot spring temperature, but large variation in the amount of discharge and Al{sup 3+} concentration. Correlation was recognized between hot spring temperature and amount of discharge, between hot spring temperature and anion, between amount of discharge and electric conductivity, and between amount of discharge and anion. (NEDO)

Numerical method to calculate flow-induced vibration in turbulent flow. 3rd Report. Analysis of vortex-induced vibration in an array of elastically supported tubes; Ranryuba ni okeru ryutai kozotai rensei shindo kaiseki shuho no kaihatsu. 3. Kangun ni okeru uzu reiki shindo kaiseki

Energy Technology Data Exchange (ETDEWEB)

Sadaoka, N.; Umegaki, K. [Hitachi, Ltd., Tokyo (Japan)

1996-01-25

A vortex-induced vibration of an array of elastically supported tubes is simulated in two-dimension by using a flow-induced vibration analysis program, which was developed in order to evaluate flow-induced vibration in various components such as heat exchangers. From a comparison of calculated results and experimental data, the following points are observed. (1) For the calculated results in a 5 {times} 5 square array, the flow pattern surrounding the first-row tubes is markedly different from that observed in the second-row or third-row tubes. This flow pattern is the same as that obtained from the experiment. (2) All tubes begin to oscillate due to unsteady fluid force and the oscillating mode is different for each row of tubes. These oscillation patterns show the same tendency in the experiments and it is concluded that the developed method can simulate vortex-induced vibration in an array of elastically supported tubes. 19 refs., 10 figs., 1 tab.

Experimental and numerical studies on aerodynamical noise in a high-speed elevator. ; Effect of apron on flow around elevator car. Kosoku elevator no kuriki soon ni kansuru kenkyu. ; Kagomawari no nagare ni oyobosu apron bu no eikyo

Energy Technology Data Exchange (ETDEWEB)

Matsuda, H.; Fukuyama, Y.; Miyasako, K.; Endo, M. (Toshiba Corp., Tokyo (Japan)); Yokono, Y. (Tokyo Institute of Technology, Tokyo (Japan). Research Laboratory of Precision Machinery and Electronics)

1993-08-25

For the purpose of reducing aerodynamic noise of a high-speed elevator, the flow around the elevator car was subjected to a flow visualization experiment and numerical simulation using a model simulating an elevator. The state of the flow in front of the door was observed by visualizing the field of flow around the model submerged in a water bath using a poster color tracer. Further, a wind tunnel experiment was carried out to observe the effects of flow at the side wall of the car. An oily agent using TiO2 as pigment was used for observing the pattern of oil film on the surface of the model and the observed results were recorded on a video tape. Since the oil solution is white, the place where the oil film is peeled by a strong shearing force exhibits a pattern of black color which is the color of the model substrate. Flow in front of the door is different depending on whether the car is in the upward motion or in the downward motion and affected by the presence of apron. During the downward motion of the car, the vertical vortices accompanying the flow detouring from the rear surface to the front surface of the apron are generated at both ends of the apron and thereby the streamlines are concentrated to generate accelerated flow in front of the door. Suppression of vertical voltices is important for reducing noise during downward motion. Peeled flow and vortex interference appear at the side and back of the car and forms a field of complex flow. 12 refs., 10 figs.

FY 1997 report on the survey of potential impacts of enlarging ASEAN on political and economic systems in South East Asia; 1997 nendo chosa hokokusho (ASEAN kakudai no Higashi Asia no seiji keizai chitsujo eno eikyo chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This report surveys potential impacts of ASEAN (Association of South East Asian Nations) on inter-ASEAN affairs and its external relations when ASEAN will enlarge its members to include all nations in South East Asia, and thus fully represent the region. For this purpose, the survey was conducted on Vietnam, Myanmar, Laos and Cambodia, which joined in 1995, from the viewpoint of their economic and political system, and their relations with other member countries. The nature of ASEAN has gradually transformed, in which all the countries in the region have increased and internal economic issues have been tackled. It has an aim to stimulate inter-ASEAN trade and induce foreign direct investment into ASEAN as a whole by reducing import duties on intra-ASEAN trade. Underlying in these, new development is a concern about growing economic and military power of China. ASEAN solidarity will work an leverage against China should change toward worse, and ASEAN will function as a regional stabilization factor. ASEAN is needed for the stability of both in economic and political order in East Asia. Japan has to further promote its cooperation with ASEAN to help its solidarity as an association. 24 refs., 21 figs., 25 tabs.

Fiscal 2000 report of investigation. Project for promoting international cooperation for global environment/Project for assessment on effect of climate change; 2000 nendo chikyu kankyo kokusai kyoryoku suishin jigyo / kiko hendo eikyo hyoka nado jigyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Assessment and examination were conducted on the scientific/technological aspect, environmental aspect and economic/social aspect concerning measures for mitigating climate change, as a part of international cooperation in global warming issues. In the development of assessment methods for cost analysis, it revealed that, in the activities for mitigating emission of greenhouse effect gases (GHG) or for increasing carbon sequestration, benefits of the mitigation sometimes surpassed their cost, allowing the society to benefit from the mitigation. In the examination of problems in technology transfer and their solutions, it was found that, in order to attain successful transfer, partnership among the parties interested was essential and that each government was capable of promoting such partnership. In the assessment of various policy options, the situation in the U.S. is such that the market aspect of GHG emission permit and credit trading is rather weak because of immaturity in a legal framework on GHG emission trading and because of undefinedness in the systems of the Kyoto Protocol and in the possibility of its validation. However, the reason enterprises are actively participating in the early market is that they plan a risk-hedge for example in anticipation of tighter regulations in the future. (NEDO)

Robust estimation of space influence model. Part 2. ; Synthesis of urban lattice data analysis for practical use. Kukan eikyo model no antei suiteiho. 2. ; Jikkenteki mesh data kaiseki system kochiku no tameno kukan sokan bunsekiho no taikeika

Energy Technology Data Exchange (ETDEWEB)

Aoki, Y.; Osaragi, T. (Tokyo Institute of Technology, Tokyo (Japan). Faculty of Engineering)

1991-07-30

In this study, a method for robust estimation of parameters of the space influence function model, which was possible to become unstable, was investigated by applying a principal component method. In order to carry out the robust estimation of parameters without the effect of multicollinearity, regression coefficients of principal components with small eigenvalue and with small single-correlation with dependent variables were required to forced to be zero in the estimation method by principal component. Through the case study using the real urban lattice data, the conventional method was compared with the principal component method. As a result, the latter method realized the excellent sabilization of spatial distribution patterns of estimation parameters and the simple interpretation of parameters. It also improved reliability since 95% confidence interval of the estimated value became smaller. This method was found to be effective as a basic measure to acheve the stability of parameters. 10 refs., 7 figs.

Effects of air pollution on the health of regional inhabitants. Part I. Survey of disease state by Enquete. Taiki osen ga chiiki jumin no kenko ni oyobosu eikyo ni tsuite-dai ippo; anketo ni yoru shojo chosa

Energy Technology Data Exchange (ETDEWEB)

1973-01-01

From May to July 1972, the disease states of 2096 inhabitants (710 men and 1386 women) in the Fukushima Ward of Osaka City, where the concentration of sulfur trioxide in the air was (yearly average) 1.81 mg/day/100 sq cm and that of carbon monoxide was 5.3 ppM, and that of nitrogen dioxide was 5.3 ppM, were surveyed. The number of persons surveyed was 2.9% of all the inhabitants of the Ward. Twenty-two point one percent were in their thirties, 20.1% in their forties, 16.5% in their sixties, and 15.3% in their fifties. Those who experienced chest diseases were 2.9% of the total, and those with heart diseases were 1.5%. Non-smoking men were 31.7% of the total. The percentage of long-term complaints of cough and sputum was 11.8% in the eastern section, 11.2% in the northern section, 10.0% in the southern section, 6.8% in the western section of the Ward. The frequency of complaints was highest in the sixties (12.7%), followed by 11.5% in the fifties, 11.3% in the thirties, and 8.6% in the forties. The frequency of complaints from men was 11.1% and that from women was 6%. The frequency of complaints was 19.8% in smokers, 8.5% in those who smoked less, and 6.8% in non-smokers. The frequency of complaints classified by residential area showed 12.6% in industrial areas, and 7.8% in residential and commercial areas. The frequency of complaints of inhabitants who live along National Road No. 2 was relatively high, ranging from 15.0 to 18.8%, and the frequency of complaints of inhabitants was apparently higher than those of people who only work in the Ward.

Thermal boundary condition effects on forced convection heat transfer. Application of a numerical solution of an adjoint problem; Kyosei tairyu netsudentatsu mondai ni okeru netsuteki kyokai joken no eikyo. Zuihan mondai no suchi kai wo mochiita kosatsu

Energy Technology Data Exchange (ETDEWEB)

Momose, K.; Saso, K.; Kimoto, H. [Osaka University, Osaka (Japan). Faculty of Engineering Science

1997-11-25

We propose a numerical solution for the adjoint operator of a forced convection heat transfer problem to evaluate mean heat transfer characteristics under arbitrary thermal conditions. Using the numerical solutions of the adjoint problems under Dirichlet and Neumann conditions, both of which can be computed using a conventional CFD code, the influence function of the local surface temperature on the total heat transfer and that of the local surface heat flux on the mean surface temperature are obtained. As a result, the total heat fluxes for arbitrary surface temperature distributions and the mean surface temperatures for arbitrary surface heat flux distributions can be calculated using these influence functions. The influence functions for a circular cylinder and for an in-line square rod array are presented. 14 refs., 9 figs., 1 tab.

FY 1990 report on the survey of geothermal development promotion. Survey of environmental effects before jetting (No.34 - Kaminoyu/Santai area); 1990 nendo chinetsu kaihatsu sokushin chosa. No.34 Kaminoyu Santai chiiki - Funki zen kankyo eikyo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-01-01

For the evaluation of effects of geothermal development on the peripheral environment in the Kaminoyu/Santai area in the southwest part of Hokkaido, survey of the present situation of the environment was made. As a result of the survey, as to the climate of this area, the mean temperature, precipitation, etc. were almost the same as those of the nearest meteorological office of Hakodate, and the wind velocity was lower. Concerning the air, the mean concentration of H{sub 2}S was 0.8-3.6 ppb, SO2 was less than the detectable limiting value, Hg was 0.018-0.12 {mu}g/m{sup 3}N in average, and suspended particulate was 0.014-0.028 mg/m{sup 3}. Each of them satisfied the environmental criteria and the control level. The water quality satisfied the AA type criteria at every point of the river surveyed. The noise/vibration at the time of well drilling were 47-50dB at 10m measuring point and less than the lower limit of measuring at measuring points farther than 50m measuring point/100m measuring point. Every hot spring was drilled and spontaneously welling, and variations in spring temperature/welling amount were comparatively small. Micro earthquakes of 495 were observed in 47 days in total. Besides, survey was made of animals, plants, soils, scenery, etc. (NEDO)

Fiscal 1999 research and verification of geothermal energy exploring technologies and the like. Development of reservoir change prediction technology (Development of modelling support technology); 1999 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho (yoyaku). Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu (modeling shien gijutsu))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The aim is to develop and popularize techniques relating to geological information such as thermal history. The efforts center about the application of a now-available core fracture measuring system to developed geothermal fields and about the development of new technologies. The measuring system is applied to some core cuttings collected from five boreholes in the Akinomiya district, Akita Prefecture, and the system is used for (1) the evaluation of homogenization temperatures of inclusions in the fluid, (2) the measurement of the points of melting from ice of inclusions in the fluid, and (3) the implementation of laser Raman spectroscopy. Under item (1), it is found that the minimum homogenization temperature of quartz phenocryst in the mother rock or of low-salinity fluid inclusion in a quartz vein is near the current subsurface temperature and that subsurface and reservoir temperatures may be known by evaluating their homogenization temperature. Under item (2), it is found that the NaCl equivalent salinity is distributed in the range of 0.0 to 25wt% and that, in this connection, there is difference between a fluid in a fluid flow and a fluid spurting as thermal water in the Akinomiya district. Under item (3), CO2, N{sub 2}, and CH{sub 4} are detected in most of the boreholes. Efforts are exerted to develop a hydrothermal fluid analyzing technique using a rapid rock dating method and traces of chemical ingredients in hydrothermal minerals. (NEDO)

Fiscal 1997 survey report. Subtask 3 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (total system/nation-level energy estimation and assessment); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 3 zentai system ikkoku kibo deno yosoku hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

With relation to the energy supply/demand in Japan toward the second half of the 21st century, an analysis was made using the MARKAL model to predict the amount of hydrogen introduction in the future. As in the last fiscal year, conditions of the study of IEA/ETSAP were continuously used. It was decided on that hydrogen was produced by hydroelectric/photovoltaic power generation overseas. Prices were made 14 yen and 27 yen/103 kcal. The limit price of introduction of import hydrogen was calculated. During the period from 2030 to 2050, if the hydrogen price is less than 7 ten/103 kcal, the result showed that hydrogen can be introduced in a lot of scenarios (case of the severe control of CO2 emissions, case of high priced fossil fuels, case of the low capacity of the development of nuclear power generation, etc.) As the form of hydrogen use, promising are the hydrogen combustion turbine power generation, mixture with town gas (hythane) and hydrogen cars. However, a precondition for the introduction is that the cost of hydrogen car should be more economical than the competitive means of transportation. As to hydrogen combustion turbines and hythane, the quantity of hydrogen introduction depends little on variations of characteristics of the equipment used. 11 refs., 55 figs., 21 tabs.

Assessment of effects of maturity of Japan`s economy and society and improvement in automotive fuel consumption on demand for automotive fuels; Nippon keizai shakai no seijukuka to nenpi kaizen ga jidoshayo nenryo juyo ni ataeru eikyo hyoka

Energy Technology Data Exchange (ETDEWEB)

Shimomura, S. [The Institute of Energy Economics, Tokyo (Japan)

1998-04-01

This paper evaluates impacts of the maturity of Japan`s economy and society and the improvement in automotive fuel efficiency on the demand for automotive fuels by FY 2010. Standard case and lower order case were examined. When the traffic volume of passenger cars in FY 1995 is assumed to be 100, it become 121 and 119 in standard and lower order cases, respectively. The traffic volume of lorries become 106 and 102 in standard and lower order cases, respectively, which showed a rather small growth. Deterioration rate of the fuel consumption was estimated by considering the difference in fuel consumption of new cars and existing cars. Although the fuel consumption will be lowered by FY 2000 when the cassation rate of ordinary passenger cars will rapidly increase, the impact will be lowered after that. For lorries for commercial use, the running fuel consumption will be gradually lowered due to the increased carrying capacity and vehicle weight a lorry with improving the transportation efficiency. Decreased running speed by traffic jam is also a cause of the deterioration of fuel consumption. When a policy of improvement in the fuel consumption is promoted in a background of CO2 issues, the fuel consumption of each vehicle will be gradually improved. The peak of fuel demand will be in FY 2005 by considering the changes in economical and social structures and the improvement in fuel consumption for the environmental protection. 5 figs., 3 tabs.

Report on the results of the FY 1999 study on the standardization of the measuring/database method for data on human body shape characteristics; 1999 nendo shinki sangyo ikusei sokkogata kokusai hyojun kaihatsu jigyo. Shintai keitai tokusei data no keisoku database ka shuho ni kakawaru hyojunka

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The purpose of the present project is to conduct studies on three-dimensional human body measurement; the method of describing measurement results; the method of developing a database using measurement data; and the method of statistical data processing. Results of these studies are to be used to establish an international standard on three-dimensional human shape data. In the course of the project, the state of relevant studies conducted outside Japan was investigated. As a result, it has been found that studies on the method of processing three-dimensional human body shape data are being promoted independently by different research institutes. At present, it is impossible to build up a consensus on the method among these institutes. Additionally, standardizing the method may stifle the creativity of researchers. We have therefore decided to exclude the standardization of body shape data processing method from the scope of the project. Our conclusion is that the standard proposed in the project should be based on the human body shape data format, obtained through a study on the method of describing three-dimensional body shape data. And it should provide for a data format for three-dimensional human body measurement, which can store all data required for product of space design (e.g. data on human body sizes, landmarks and texture). According to our plan, this standard will be proposed in the form of a technical report, since it is yet too early to se out establishing the standard as an international standard. (NEDO)

Effects of variation of flow and accumulation of suspended solids on the performance of anaerobic/aerobic biofilm system applied to grey water treatment. kenkiter dot koki roshoho no shori seino ni oyobosu ryuryo hendo oyobi kendaku busshitsu no eikyo

Energy Technology Data Exchange (ETDEWEB)

Okubo, T; Sagehashi, M; Otsuka, N; Okada, M; Murakami, A [Tokyo University of Agriculture and Technology, Tokyo (Japan)

1991-04-10

In this study, effects of variation of flow and accumulation of suspended solids (SS) on the performance of anaerobic/aerobic biofilm system were investigated through the laboratory test using synthetic wastewater and the field test using grey water. Effects of flow variation scarcely appeared on the time change of effluent quality in both cases where daily average hydraulic retention time (HRT) in anaerobic filter was 20h and that of aerobic filter was 6.7h. In the field test, however, removal rate of organic substances was lower (20-30%) than that of the laboratory test (90%), since SS content in grey water accumulated in the anaerobic filter which led dissolution of organic substances from accumulated SS, blocking, and short-circuit flow. Moreover, it was confirmed by the batch test that constituent of grey water has lower resolution for microorganisms and is more difficult to nitrate than synthetic waste water. 24 refs., 11 figs., 4 tabs.

FY 2000 report on the investigation of environmental effects in the geothermal development promotion survey. Tertiary. No.B-7 Kuwanosawa area; 2000 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho - No. B-7 Kuwanosawa chiiki (Dai 3 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-01-01

In the Kuwanosawa area, Yuzawa city, Akita prefecture, survey was conducted to grasp effects of drilling for structural boring in the geothermal survey on the peripheral environment. In the survey of animals, there were 5 orders/10 families/19 species of mammals and 10 orders/25 families/73 species of birds. Three kinds of precious animals were confirmed. There were 132 families/6,670 species in the flora. Three kinds of precious plants and three kinds of precious floras were confirmed. During the survey, drilling for structural boring was conducted. At three spas for survey, there were recognized some survey items of which there were great fluctuations. However, those are seasonal valuations or valuations related to the situation of the inside of hot springs. It is not recognized that the fluctuations were caused by the drilling work and pumping-up of geothermal water. The noise made during the well drilling was reduced around the well as theoretical values indicated. At a spot 200m away from the well, the noise was reduced from the environmental standard, and accordingly, it seems that there are few effects on the peripheral environment. The vibration was reduced around the well more than theoretical values indicated. That was below the control level at a spot 25m away from the well, and it seems that there are few effects on the peripheral environment. (NEDO)

Influence of ([alpha]+[beta]) STA and surface finishing on mechanical properties of Ti-6Al-4V alloy. Ti-6Al-4V gokin no kikaiteki seishitsu ni oyobosu taikichu ([alpha]+[beta])STA shori oyobi hyomen shiage no eikyo

Energy Technology Data Exchange (ETDEWEB)

Asami, K [Musashi Inst. of Tech., Tokyo (Japan); Hironaga, M [Musashi Inst. of Technology, Tokyo (Japan). Graduate Student

1992-10-15

Ti-6Al-4V allow was solution treated and aged (STA) in air, and the effect of degraded layer on static tensile properties and fatigue behavior was studied. Also, influence of surface finishing on fatigue strength was studied. Degraded layer formed with 0.75mm thick hardened layer has been formed below extremely thin TiO2 scale. Static tensile properties and fatigue behavior are not influenced by the hardened layer. The hardened layer formed below embrittle layer has smaller hadenening scale, and has shown no structural change with the core. Even for an embrittle layer of about 10[mu]m thickness, the ductility and fatigue strength have reduced significantly. The static strength has been improved about 20% with the complete removal of embrittle layer. The fatigue strength of the receiving material has been greater in the case of mechanical polished finishing using NO.1500 emery paper and diamond taste of 1[mu]m compared to electrical polishing. However, the fatigue strength has been lower in the case of mechanical polished STA material compared to electropolished material. 8 refs., 18 figs., 2 tabs.

Research report for fiscal 1998. Survey on the researchers and research institutes for the effects of global warming and its countermeasures; 1998 nendo onshitsu koka gas ni yoru kankyo eikyo nado ni kansuru kenkyusha kenkyu kikan chosa chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Researchers and research institutes across the world (except those in Japan), engaged in the study of global warming and measures to deal with the phenomenon, are extracted in compliance with certain specified standards, and the latest information on them is appropriately arranged and listed. It is further developed into an electronic database for the convenience of users. The collected information includes more than 230 research institutes and more than 1,000 researchers. The endeavor is exerted by extracting essays and institutes mainly out of the on-line databases. More than 1,000 essays and 130 institutes are covered. Visits are made to five institutes in the U.S. and four in Europe who are most actively engaged in the study of global warming, and detailed researches are conducted and information is exchanged. The Argonne National Institute copes with all energy problems related to global warming. Descriptions are given about environmental impact surveys and CO2 isolation in the ocean at the Center for Global Science of the Massachusetts Institute of Technology. At the Oak Ridge National Laboratory, the visitors heard explanations of technologies related to renewable energies and so forth. Researches are made into ecosystems at the University of California, and into natural energies at the University of Hawaii. Also visited are research institutes in Australia, Germany, Netherlands, and Britain. (NEDO)

Numerical simulation of growth of flames formed in two-dimensional mixing layer. 2nd Report. Effect of dilution of fuel; Nijigen kongo sonai ni keiseisareta kaen no seicho ni kansuru suchi simulation. 2. Nenryo no kishaku ni yoru eikyo

Energy Technology Data Exchange (ETDEWEB)

Noda, S [Toyohashi University of Technology, Aichi (Japan); Hashimoto, K [Sumitomo Metal Industries, Ltd., Osaka (Japan); Nakajima, T [Kobe University, Kobe (Japan). Faculty of Engineering

1994-07-25

The effect of fuel dilution on growth of flames formed in 2-D mixing layers was studied by numerical simulation. The methane mass fraction of fuel was adjusted to 1.0, 0.3 and 0.2 through dilution by nitrogen, while the oxygen mass fraction of an oxidizer was fixed at 0.27. Flame structure was complicated due to the flows separated by flame at the leading edge of flames, and three peaks of the second Damkohler number were observed. Fuel dilution by nitrogen caused blow-off of flames, and the mixing ratio of the fuel and oxidizer at the leading edge of flames was essential to blow-off of diffused flames. In the case where vortices were observed in a flow field, the first Damkohler number was important which was determined by the hydrodynamic characteristic time of coherent vortices and the chemical characteristic time of flame propagation based on the mixing ratio of the fuel and oxidizer at the leading edge of flames. The diffused flames were elongated by shearing force, and an exothermic reaction was suppressed and a flame stabilization decreased with a decrease in second Damkohler number. 10 refs., 9 figs., 1 tab.

Analysis of transient thermal behaviors during the charging process in stratified heat storage tanks. 2nd Report. Effects of characteristic parameters; Seiso chikunetsu sonai deno juten katei no kato netsuteki kyodo ni kansuru kaiseki. 2. Tokusei inshi no eikyo

Energy Technology Data Exchange (ETDEWEB)

Yoo, H; Hong, H; Pak, E

1997-11-25

The mixing effect deteriorates performance in a stratified heat storage tank. In the present study, the effect of characteristic factors during the charging process was analyzed, based on the analytical solution in the previous study in which a strict boundary condition was applied and a mixing effect was included. Also, the usefulness of the solution was verified and the method of application to a real system was examined by comparing it to other experimental results. It was concluded that the depth of the perfectly mixed region is dominant unless the Peclet number is very small. 10 refs., 8 figs.

Effect of volume change of coal during plastic and resolidifying phase on the internal gas pressure in coke ovens; Sekitan nanka saikoka katei ni okeru taiseki henka ga cokes ro no nanka yoyu sonai gas atsu ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Nomura, S; Arima, T [Nippon Steel Corp., Tokyo (Japan)

2000-08-01

The coking pressure in coke oven, which is caused by the internal gas pressure in the coal plastic layer, is determined by the gas permeability of the layer. The gas permeability of the plastic layer depends on its density as well as the physical property of the plastic coal itself The plastic layer is between the coke layer and the coal layer and the effect of the volume change of these outer layers, i.e. contraction and compression, on the density and the internal gas pressure of the plastic layer was studied. Sandwich carbonization test, where different coals were charged in the test coke oven, showed that the internal gas pressure in the plastic layer depends not only on the one kind of coal in plastic phase but also on the other kind of coal in resolidifying phase near the oven walls. The relative volume of coke transformed from the unit volume of coal was measured using X-ray CT scanner and it varied greatly across the coke oven width depending on the kinds of coals. The volume change of coal during plastic and resolidifying phase affects the density and the internal gas pressure of the plastic layer The relative volume of semicoke and coke transformed from the unit volume of coal near the oven walls is higher for a high coking pressure coal than that for a low coking pressure coal. This leads to the high density of the plastic layer and the generation of dangerously high internal gas pressure in the oven centre. (author)

Emission characteristics of premixed lean diesel combustion. Effects of injection nozzle and combustion chamber shape on combustion and emission characteristics; Kihaku yokongo diesel nensho no haishutsubutsu tokusei. Funmu keijo oyobi nenshoshitsu keijo ga haishutsu gas tokusei ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Harada, A; Sasaki, S; Miyamoto, T; Akagawa, H; Tsujimura, K

1997-10-01

Many articles about low NOx emission combustion are reported. A mixture formation is necessary to success low NOx emission combustion. But, there is few reports about the effect of nozzle and combustion shape on emissions which give influence on mixture. In this paper, the effects on characteristic of combustion and emissions of some land of injection nozzle and combustion chamber shape were investigated. As a result, it was cleared that the influence of combustion chamber shape on characteristic of combustion and emissions was varied by spray shape, and pintle type injection nozzle was suitable for PREDIC. 7 refs., 10 figs., 1 tab.

Feasibility study on environmental control in green house with air drawn from an abandoned mine. Part 5. ; Prediction and monitoring for development and design of rock. Haikonai wo toshita kiryu ni yoru onshitsu reidanbo no jitsuyosei ni tsuite. 5. ; Ganban kaihatsu sekkei no tameno yosoku to monitaringu

Energy Technology Data Exchange (ETDEWEB)

Mizuta, Y; Sano, O [Yamaguchi Univ., Yamaguchi (Japan). Faculty of Engineering; Zhang, Xiaoming [Yamaguchi Univ., Yamaguchi (Japan). Graduate School

1994-03-25

The horizontal land was made by burying the valley made by abandoned mine with waste rocks in Okawa Village in Kochi prefecture, and hydroponic cultivation was carried out. Possibility of use of air flow heat energy using the mine ventilation in order to economize and save energy of this cultivation was studied. If continuous green house ventilation is carried using air drawn from tunnel, applicable house temperature and humidity for certain scale of green house was possible to control within constant limit. When warming of 4 green houses from November to April was carried out, the maximum power load, the heating load for January, was 1,746.43kW and ventilation rate was 5.51 times/hour. Consumption for February was higher than January because of decrease of airflow drawn energy inside the tunnel. As for cooling from July to September, for August as the hottest month, maximum consumed energy required to maintain green house temperature was 2,058.28kW, and demand of airflow rate drawn inside the tunnel was 128.38m[sup 3]/s. 7 refs., 7 figs., 5 tabs.

Fiscal 2000 survey report. Survey of preparation of energy consumption index for Asian region and of prediction of amount of new energy to be introduced; 2000 nendo Asia chiiki no energy shohi koritsu shihyo no sakusei to shin energy donyuryo no yosoku ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For Japan whose domestic reduction of greenhouse gas emissions is but limited, an approach to the problem with emission tradings and CDMs (clean development mechanisms) taken into consideration is necessary, and improvement on energy consumption in the Asian region as a whole is indispensable. From this viewpoint, countries in Asia who might be candidate importers of Japan's technical assistance were selected, and their energy conservation potential and farming village electrification potential were investigated. Covered by the survey were China, Philippines, Thailand, Vietnam, Malaysia, Indonesia, and India. Investigations were conducted into the fields named below, and the results were grouped into the same. The fields were (1) economic growth and energy supply/demand in the Asian region, (2) energy conservation in the Asian region, (3) electrification of farm villages in the Asian region, (4) cost analysis for farm village electrification in the Asian region, and (5) simulation of new energy introduction. The results show that there is a great difference between the seven countries in all the five fields. (NEDO)

Fiscal 1999 research and verification of geothermal energy exploring technologies and the like. Development of reservoir mass and heat flow characterization (Development of reservoir change prediction technology - Summary); 1999 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho (yoyaku). Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Efforts are exerted to develop technologies for accurately predicting reservoir expansion or other changes through a comprehensive analysis of the fracture hydrology method, gravity monitoring method, electrical and magnetic monitoring method, seismic monitoring method, and their associated technologies. The endeavors cover the development of a post processor system which involves gravity, self-potential, geochemistry, resistivity, etc., and is related to a reservoir simulator, and the development of a reservoir modelling technology. For the development of a post processor system, efforts continue (1) to develop a processor to deal with gravity, self-potential, resistivity, and geochemistry, (2) to carry out basic studies of changes in seismic propagation characteristics, (3) to develop databases, and (4) to develop a simulator interface. Under item (1), development involving gravity, self-potential, and geochemistry is complete, and now manuals are being prepared. A prototype design is complete for resistivity. For the development of a reservoir modelling technology, modelling is under way for the Onikobe and Sumikawa districts. Existing data are taken care of, and productivity predicting simulation is carried out. (NEDO)

Hydroelastic responses of pontoon type very large floating offshore structures. 2nd Report. Effect of the water depth and the drift forces; Pontoon gata choogata futaishiki kaiyo kozobutsu no harochu chosei oto ni kansuru kenkyu. 2. Senkai eikyo to hyoryuryoku

Energy Technology Data Exchange (ETDEWEB)

Maeda, H; Miyajima, S [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science; Masuda, K; Ikoma, T [Nihon University, Tokyo (Japan). College of Science and Technology

1997-12-31

Steady-state drift force in regular waves is theoretically analyzed. It is also studied under combined external force experimentally using a two-dimensional water tank. The fluid forces are analyzed by the pressure distribution method based on the potential theory, in which the effects of water depth are taken into account to discuss the effects of elastic deformation of the floating structure on the drift characteristics of steady-state waves. The tests were carried out using a wave-making circulating water tank equipped with a wind duct to create wind, waves and tidal flow. Drift force under a combined external force by wind, wave and/or tidal flow cannot be accurately predicted by arithmetically adding these components. For predicting drift force by tidal flow, it is necessary to take into account drag force in current at the floating structure bottom as well as that in wind at the front face. Drift force by tidal flow is affected by shallowness of water, which should be taken into account for drag forces. The floating structure will be deformed along the wave face as its stiffness decreases, basically decreasing steady-state drift force. 9 refs., 14 figs.

Report on survey on geothermal development promotion in fiscal 1999. Report on survey on environmental effects - noise and vibration (No. B-5, Busadake Area); 1999 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa (soon shindo) hokokusho (No.B-5 Busadake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Identification of noise and vibration levels and evaluation on environmental effects were performed in association with the excavation in the geothermal investigation well drilling point (well N11-MD-3) and the vicinity thereof in the Busadake area in Hokkaido. In the survey, noise and vibration were measured before and during the well excavation at the well drilling point and nearby four points (boundary of the drilling premises, 500-m point, Kawakita Spa and the entrance to the mountain stream of petroleum). In addition, a distance decay survey was carried out at five points in one direction from the well drilling point. The result of the noise measurement showed the value of about 30 to 50 dB before the well excavation at the drilling point and its vicinity, and about 40 to 60 dB during the excavation. The vibration was about 40 dB at the boundary of the premises during the excavation, whereas the places other than them showed the lower limit of measurement. In the distance decay of the noise, 75 dB at the 10-m point decayed to 50 dB or lower in the 200-m point, while the vibration level of 75 dB decayed to 30 dB or lower in the 100-m point. These facts lead to a conception that the noise and vibration in association with the well drilling would not give great influence on the neighboring environment. (NEDO)

Fatigue life estimation of welded joints of an aluminium alloy under superimposed random load waves (follow-up report). Effects of high frequency components; Jujo random kajuka ni okeru aluminium gokin yosetsu tsugite no hiro jumyo suitei (zokuho). Koshuha seibun no eikyo

Energy Technology Data Exchange (ETDEWEB)

Takahashi, I.; Maenaka, H.; Takada, A. [Ship Research Inst., Tokyo (Japan)

1996-12-31

In order to examine fatigue behavior of boxing welded joints of anticorrosion aluminum A 5083 P-O alloy, the residual stress measurements, static loading tests, elastic finite element analyses, constant amplitude fatigue tests, and random fatigue tests were conducted. For a load wave in the random loading fatigue tests, a direct current component, a zero-mean narrow band random process, and a high frequency component were combined and superimposed, to examine the effect of the high frequency component and the effect of the stress cycle count method and the mean stress correction on the life estimation. For the fatigue analysis, a reference stress, such as that considering the structural stress concentration, was proved effective in reducing the amount of scattering in the fatigue test results and in improving the life estimation accuracy. Accordingly, for the actual scale measurements, it is insufficient only to measure the stress at points far from the crack initiation place. It is required to analyze the fatigue by measuring the reference stress same as the basic data acquisition tests in the laboratory. 4 refs., 21 figs., 4 tabs.

Solid/liquid phase change heat transfer in porous media. Effect of density inversion of water on melting process in a rectangular region; Takoshitsu sonai no ko-ekiso henka. Mizu no mitsudo gyakuten ga kukei ryoiki no yukai katei ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Sasaguchi, K [Kumamoto University, Kumamoto (Japan). Faculty of Engineering

1994-12-25

Solid/liquid phase change in porous media has a wide relation with freezing and melting of ground bed, storage of cold heat in soil, and underground heat exchangers. This paper describes an investigation on the effect of density inversion on melting of ice in porous media by using the previously reported numerical analysis method. The high-temperature side temperature and the Darcy number were varied and investigated systematically on the ice in a porous media sealed in a rectangular container of which right hand side is maintained at elevated temperatures and the other three sides are insulated of heat. As a result, a large number of findings were obtained including the following matters: when the Darcy number is fixed at 4.01 {times} 10{sup {minus}5} and the high-temperature side temperature, Tw, is varied, the fluid descends along the high-temperature side because of the density inversion at Tw=4{degree}C, and forms one weak circulation that rotates clockwise; however, when the temperature reaches 16{degree}C, the circulation disappears, and a circulation rotating counterclockwise is observed, becoming identical to the case of a fluid where there is no density inversion; and change in the Nusselt number against the melting ratio, R, is the smallest at Tw=8{degree}C, and decreases monotonously with the R. 15 refs., 12 figs.

Study on closed pressure vessel test. Effect of heat rate, sample weight and vessel size on pressure rise due to thermal decomposition; Mippeigata atsuryoku yoki shiken ni kansuru kenkyu. Atsuryoku hassei kyodo ni oyobosu kanetsusokudo, shiryoryo oyobi youki saizu no eikyo

Energy Technology Data Exchange (ETDEWEB)

Aoki, Kenji.; Akutsu, Yoshiaki.; Arai, Mitsuru.; Tamura, Masamitsu. [The University of Tokyo, Tokyo (Japan). School of Engineering

1999-02-28

We have attempted to devise a new closed pressure vessel test apparatus in order to evaluate the violence of thermal decomposition of self-reactive materials and have examined some influencing factors, such as heat rate, sample weight, filling factor (sample weight/vessel size) and vessel size on Pmax (maximum pressure rise) and dP/dt (rate of pressure rise) due to their thermal decomposition. As a result, the following decreasing orders of Pmax and dP/dt were shown. Pmax: ADCA>BPZ>AIBN>TCP dP/dt: AIBN>BPZ>ADCA>TCP Moreover, Pmax was not almost influenced by heat rate, while dP/dt increased with an increase in heat rate in the case of BPZ. Pmax and dP/dt increased with an increase in sample weight and the degree of increase depended on the kinds of materials. In addition, it was shown that Pmax and dP/dt increased with an increase in vessel size at a constant filling factor. (author)

Hydroelastic responses of pontoon type very large floating offshore structures. 2nd Report. Effect of the water depth and the drift forces; Pontoon gata choogata futaishiki kaiyo kozobutsu no harochu chosei oto ni kansuru kenkyu. 2. Senkai eikyo to hyoryuryoku

Energy Technology Data Exchange (ETDEWEB)

Maeda, H.; Miyajima, S. [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science; Masuda, K.; Ikoma, T. [Nihon University, Tokyo (Japan). College of Science and Technology

1996-12-31

Steady-state drift force in regular waves is theoretically analyzed. It is also studied under combined external force experimentally using a two-dimensional water tank. The fluid forces are analyzed by the pressure distribution method based on the potential theory, in which the effects of water depth are taken into account to discuss the effects of elastic deformation of the floating structure on the drift characteristics of steady-state waves. The tests were carried out using a wave-making circulating water tank equipped with a wind duct to create wind, waves and tidal flow. Drift force under a combined external force by wind, wave and/or tidal flow cannot be accurately predicted by arithmetically adding these components. For predicting drift force by tidal flow, it is necessary to take into account drag force in current at the floating structure bottom as well as that in wind at the front face. Drift force by tidal flow is affected by shallowness of water, which should be taken into account for drag forces. The floating structure will be deformed along the wave face as its stiffness decreases, basically decreasing steady-state drift force. 9 refs., 14 figs.

Study on a constant-tip-speed-ratio operation of wind power generation system. Effect of load control system on dynamic behavior; Furyoku hatsuden system no hensoku seigyo unten ni kansuru kenkyu. Fuka seigyokei ga system no rikigakuteki kyodo ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Wakui, T.; Yamaguchi, K. [Waseda University, Tokyo (Japan); Tanzawa, Y. [Nippon Institute of Technology, Saitama (Japan); Hashizume, T.; Ota, E. [Waseda University, Tokyo (Japan). School of Science and Engineering

1998-06-01

The effect that the set data of the load control system in a wind power generation system exerts on the dynamic behavior of a system was investigated. The wind power generation system consists of a hybrid wind turbine with combined Darrieus and Savonius rotors, load with a generator and battery in the center, and a controller. A constant-tip-speed ratio operation that holds the circumferential speed ratio in which the power coefficient is maximized irrespective of the change in wind velocity was used to extract and convert the wind energy more effectively. In a high-wind velocity area, the system is operated at a fixed speed, and the increase in rotation is suppressed to protect the wing strength. In a large system, the response characteristics are only slightly improved by the limited load operation range and influenced rotor inertial. Power cannot be fully extracted even if the control system is changed in setting, and the applicability to the wind situation remains low. During the actual operation, the adjustment value of the control system should be set so that the output operation is satisfactorily possible in the specified load operation range, that is, the change in the instantaneous value of an effective power coefficient indicates almost flat gain characteristics in frequency characteristics. 14 refs., 10 figs., 2 tabs.

Fiscal 1999 survey for promotion of geothermal energy development. Survey report of environmental impact survey - Hot spring fluctuation (No. B-5, Musadake district); 1999 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (onsen hendo) (No.B-5 Musadake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-12-01

Research boreholes N11-MD-3 and -4 were drilled in Shibetsu-cho, Shibetsu-gun, Hokkaido, in the period July 1999 through December 1999, and thermal water was examined at the sites in July and November 1999. For the purpose of detecting the impact of the said work on the environment, local hot springs were examined for their status before, during, and after the drilling period. Measurements were conducted in the period August 5, 1998, through December 31, 2000. It was found that no fluctuation in water temperature or yield attributable to the drilling was detected. Hot springs were examined for nine items including water temperature and pH level at four spots which were Kaiyo-dai, River Tenyu, and Otoko-yu and Onna-yu of Kawakita Hot Spring, when 23-31 measurements were performed from each of the four. (NEDO)

Fatigue life estimation of welded joints of an aluminium alloy under superimposed random load waves (follow-up report). Effects of high frequency components; Jujo random kajuka ni okeru aluminium gokin yosetsu tsugite no hiro jumyo suitei (zokuho). Koshuha seibun no eikyo

Energy Technology Data Exchange (ETDEWEB)

Takahashi, I; Maenaka, H; Takada, A [Ship Research Inst., Tokyo (Japan)

1997-12-31

In order to examine fatigue behavior of boxing welded joints of anticorrosion aluminum A 5083 P-O alloy, the residual stress measurements, static loading tests, elastic finite element analyses, constant amplitude fatigue tests, and random fatigue tests were conducted. For a load wave in the random loading fatigue tests, a direct current component, a zero-mean narrow band random process, and a high frequency component were combined and superimposed, to examine the effect of the high frequency component and the effect of the stress cycle count method and the mean stress correction on the life estimation. For the fatigue analysis, a reference stress, such as that considering the structural stress concentration, was proved effective in reducing the amount of scattering in the fatigue test results and in improving the life estimation accuracy. Accordingly, for the actual scale measurements, it is insufficient only to measure the stress at points far from the crack initiation place. It is required to analyze the fatigue by measuring the reference stress same as the basic data acquisition tests in the laboratory. 4 refs., 21 figs., 4 tabs.

Report (summarized) for fiscal 2000 on survey for demonstration of geothermal exploration technologies. Development of exploration method using reservoir bed fluctuation (Theme 5-1. Reservoir fluctuation forecasting technology); 2000 nendo chinetsu tansa gijutsu to kensho chosa hokokusho (yoyaku). Choryuso hendo tansaho kaihatsu - 5-1 (choryuso hendo yosoku gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective of developing a method effective to evaluate reservoir beds in the initial stage of development, to maintain output stability of power plants after having started the operation and to extract reservoirs existing in the vicinity of areas that have already been developed, R and D has been performed in relation with a reservoir simulator on post processors for gravity, SP, and resistivity, and on reservoir modeling. This paper summarizes the achievements in fiscal 2000. In developing the resistivity post processor, a prototype was completed. In developing the resistivity post processor for MT/CSAMT method, an analysis code was structured, and an input/output format was discussed. In developing the seismic wave post processor, a seismic wave characteristics fluctuation model was formulated. Regarding the input/output aiding GUI tools, a conceptual design was made. In developing the reservoir modeling technology, production forecasting simulation using a porous model and an MINC model was performed for the Sumikawa area. Based on the result thereof, forecast calculation was carried out on gravity change, resistivity change and natural potential change. (NEDO)

Performance evaluation of solar heating system with thermal core type soil heat storage. Part 5. Performance prediction and evaluation of the system considered of the weather condition; Taiyonetsu riyo netsu kakushiki dojo chikunetsu system no seino hyoka. 5. Kisho joken wo koryoshita system no seino yosoku to hyoka

Energy Technology Data Exchange (ETDEWEB)

Yoshida, N [Nishimatsu Construction Co. Ltd., Tokyo (Japan); Nakajima, Y [Kogakuin University, Tokyo (Japan)

1997-11-25

The paper studied a solar heating system with thermal core type soil heat storage (combining a thermal core composing of a water tank and an underground pebble tank and the soil around the heat storage tank and also using solar energy). Solar energy is stored by temperature level in the high temperature water tank, the low temperature pebble heat storage tank and the soil around the heat storage tank. Heat is recovered according to temperature as direct ventilation space heating (utilization of pebble tank air), floor heating (utilization of hot water of the heat storage water tank) and heat pump heat source (utilization of pebble tank air). A study was made of performance and regional effectiveness of the system under different weather conditions. A study was also made of effects of the water tank for short term heat storage by changing the water volume. Using the same structure, etc. for the system, the system was evaluated using weather data of Sapporo, Tokyo and Kagoshima. In terms of efficiency of the system, the system structure was found to be most suitable for weather conditions in Tokyo. However, the air heat source heat pump which cannot be usually used in the cold area has come to be used. Such effect except efficiency is also considered, and the amount of performance to be targeted in each region changes. 2 refs., 14 figs., 1 tab.

Relationship between concentration of surfactant and pressure for droplet creation, and effect on droplet size in microchannel O/W emulsification; Maikurochaneru ni yoru O/W nyukaho ni okeru kaimen kasseizai nodo to ekiteki seisei atsuryoku no kankei, oyobi koreraga ekitekikei ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Kawakatsu, T.; Komori, H.; Oda, N.; Yonemoto, T. [Tohoku Univ., Sendai (Japan). Graduate School of Engineering

1998-03-01

O/W (oil in water) emulsion is produced by micro-channel emulsification method, and the effects of surfactant concentration on the pressures at which droplet generation starts and stops are evaluated in connection with the water phase and oil phase interfacial tension. In addition, the effects of surfactant concentration and operational pressure on the droplet size are investigated by measuring the generated droplet distribution, mean droplet size, standard deviation, geometrical standard deviation, and the possibility of producing mono-dispersion emulsion whose droplet size is large than 10 micron. The breakthrough pressure and the minimum pressure for droplet generation become low with the increase of SDS (sodium lauryl sulfate) concentration. The surfactant concentration, however, is found to have no effect on the breakthrough pressure and the minimum pressure for droplet generation when the SDS concentration exceeds the critical micelle concentration. It is true also for a system added with NaCl. As regards droplet size, uniform 20{mu}m droplet is obtained irrespective of the surfactant concentration and pressure. 13 refs., 10 figs., 2 tabs.

Fiscal 2000 report on geothermal energy development promotion survey. Phase 1. Report on environmental impact survey in No. C-5 Appi district (Weather); 2000 nendo chinetsu kaihatsu sokushin chosa hokokusho. No.C-5. Appi chiiki - kankyo eikyo chosa (kisho) dai 1 ji

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

For grasping the characteristics of weather, climate, and natural earthquakes in and around the geothermal survey area in the Appi district, Iwate Prefecture, observation data of weather stations or the like in the neighborhood were collected and put in an easy-to-use order. Weather and earthquake data of the 1990-1999 decade were collected and subjected to statistical processing. Weather in the Appi District Survey C area is characterized in that it assumes the Japan Sea side pattern with much snow in winter and much rain in the rainy season. In the other seasons, however, it assumes the Pacific side inland pattern. Weather data in the Appi district and its vicinity are deemed to be similar to the values observed at the Hachimantai weather station. The area covered by the survey, however, is higher than the Hachimantai weather station by 400-900m, and therefore is that much colder and has more rain and snow. As for earthquakes, a total of 647 were recorded in the decade 1990-1999. In the Appi District Survey C area, which is approximately 20km times 20km large, suffered 31.1 events/month in 1998, which indicated a great rise in seismic occurrence. The rise is now attributed to the volcanic activity of Mt. Iwate which is deemed to be waning. (NEDO)

Thermal performance of a passive-designed dwelling unit. Annual thermal performance of two same-plan dwellings and influence of dwelling condition; Passive design sareta shugo jutaku no netsu seino ni kansuru kenkyu. Doitsu plan nijuko no nenkan netsuseino to lifestyle no eikyo

Energy Technology Data Exchange (ETDEWEB)

Sunaga, N; Muro, K [Tokyo Metropolitan University, Tokyo (Japan); Kamata, K [Housing and Urban Development Co., Tokyo (Japan)

1997-11-25

Measurements and analyses were made on two apartment houses which have attempted direct gain and natural ventilation. The measured houses are the houses A and B with total floor area of 130 m {sup 2}, respectively, in an apartment house of reinforced concrete structure, located in the southern area in Kanto Area. Sunlight is taken in from double glass windows in winter to store the heat in the reinforced concrete of the floor and rooms, while sunlight is shielded with the eaves and blinds in summer. The measurements were carried out on 16 points in every 30 minutes for one year. The result of the measurements may be summarized as follows: the indoor thermal environment in summer had the temperature varied between 24 and 34 degC because the air conditioner is used only infrequently; the house A attempts ventilation more positively than the house A, whereas the room temperature has become lower than 26 degC in about quarter of the whole measurement duration; and regarding the indoor thermal environment in winter, the house B had higher temperature in general, showing large variation with temperature exceeding 25 degC occasionally, which is thought because of difference in power consumption and ways of living in the building. 3 refs., 9 figs., 1 tab.

Image processing analysis of combustion for D. I. diesel engine with high pressure fuel injection. ; Effects of air swirl and injection pressure. Nensho shashin no gazo shori ni yoru koatsu funsha diesel kikan no nensho kaiseki. ; Swirl oyobi funsha atsuryoku no eikyo

Energy Technology Data Exchange (ETDEWEB)

Yamaguchi, I. (Japan Automobile Research Institute, Inc., Tsukuba (Japan)); Tsujimura, K.

1994-02-25

This paper reports an image processing analysis of combustion for a high-pressure direct injection diesel engine on the effects of air swirl and injection pressure upon combustion in the diesel engine. The paper summarizes a method to derive gas flow and turbulence strengths, and turbulent flow mixing velocity. The method derives these parameters by detecting movement of brightness unevenness on two flame photographs through utilizing the mutual correlative coefficients of image concentrations. Five types of combustion systems having different injection pressures, injection devices, and swirl ratios were used for the experiment. The result may be summarized as follows: variation in the average value of the turbulent flow mixing velocities due to difference in the swirl ratio is small in the initial phase of diffusion combustion; the difference is smaller in the case of high swirl ratio than in the case of low swirl ratio after the latter stage of the injection; the average value is larger with the higher the injection pressure during the initial stage of the combustion; after termination of the injection, the value is larger in the low pressure injection; and these trends agree with the trend in the time-based change in heat generation rates measured simultaneously. 6 refs., 14 figs., 2 tabs.

Effects of Al and Mn, alone and in combination, on growth and nutrient status of red pine seedlings hydroponically grown in nutrient culture solution; Suiko saibaishita akamatsunae no seicho oyobi eiyo jotai ni taisuru Al to Mn no tandoku oyobi fukugo eikyo

Energy Technology Data Exchange (ETDEWEB)

Lee, C.; Izuta, T.; Aoki, M.; Totsuka, T. [Tokyo University of Agriculture and Technology, Tokyo (Japan). Faculty of Agriculture

1997-09-10

Experiments have made clear the effects of Al and Mn on growth of red pine seedlings hydroponically grown. Analysis was performed on components of plants grown in culture solution into which Al and Mn were added alone or in combination. Photosynthesis velocity and dark respiration velocity of the seedlings were measured when they have fully grown. The following results were obtained: the Al addition reduces dry seedling weight, the T/R ratio (T is dry weight of a seedling above the ground and R is that under the ground) decreases as the addition amount is increased, and the photosynthesis velocity decreases; Al accumulates in roots reducing physiological function of the roots and concentrations of Ca and Mg; the dry weight decreases with increasing Mn addition, but does not affect the T/R ratio; the Mn addition reduces the photosynthesis velocity lowering chlorophyll content in needle leaves; the dark respiration velocity decreases as the Mn amount is increased, but does not affect that for trunks; Ca and Mg concentrations decrease in the trunks and roots; no significant compound effects of Al and Mn are recognized, and the effects are additive; and the concentration at which growth decrease appears is 10 ppm or higher for Al and 60 ppm or higher for Mn. 32 refs., 2 figs., 11 tabs.

Fiscal 1997 report on the results of the international standardization R and D. System to make comprehensive evaluation of potential health effects of next generation image media; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Jisedai media seitai eikyo sogo hyoka system

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper proposed the international standardization for the use of next generation image media by evaluating health effects of the use of next generation image media such as head mounted display and 3D monitor. A method to comprehensively evaluate health effects was studied with the design friendly to humans and standardization on safety as final targets. Themes were divided into the autonomous nervous system and the measuring system. The development was carried out of a method to evaluate the autonomous nervous function by the dynamic state of blood circulation and pupillary reflex as well as the development of portable sphygmomanometer and pupillometer. Using these developmental instruments and conventional instruments, measurement was made of blood pressure, cardiac output, respiration, pupil size, eyeball movement and focus accommodation. A possibility was suggested of obtaining the uniform elucidation also in case analytical changes of individual parameters cannot be extracted or consistency cannot be seen in the course of changes. The paper determined basic standards for the experimental use stereoscopic image, made measuring use 3D images, and collected realtime data by the overall simultaneous measuring system constructed. 109 refs., 166 figs., 18 tabs.

Effects of melt-temperature on limiting current density in Al electrodeposition and morphology of Al electrodeposits obtained from ambient temperature type molten salt; Joongata yoyuen kara no denki aluminium mekki no genkai denryu mitsudo oyobi denseki keitai ni oyobosu mekki ekion no eikyo

Energy Technology Data Exchange (ETDEWEB)

Shimizu, T.; Tatano, M.; Uchida, Y. [Nisshin Steel Co. Ltd., Tokyo (Japan)

1996-03-31

Some of more important electrolytic solutions for Al electrodeposition are organic solvents, high-temperature type molten salts and low-temperature type molten salts having a melting point of 30{degree}C or lower, such as ethylmethylimidazolium chloride (EMIC). This study uses a molten salt of AlCl3-EMIC as the low-temperature type solution for high-speed electrodeposition. Discussed herein are the effects of melt temperature on limiting current density in Al electrodeposition and Al electrodeposit morphology. Limiting current density increases as melt temperature increases at any AlCl3 concentration used in this study. The AlCl3 concentration that gives the maximum limiting current density shifts from 64 to 67mol% at a melt temperature of 120{degree}C. A dense, smooth Al electrodeposited film results at a melt temperature of 100{degree}C or lower, but the electrodeposited grains become coarser as melt temperature increases. Melt temperature can be increased to 140{degree}C to secure a smooth electrodeposited film, showing possibility of 2 times faster electrodeposition than the conventional one. 21 refs., 12 figs., 1 tab.

Fiscal 1997 report on the results of the international standardization R and D. Measurement of ultra-micro chemical substances and measuring methods of hormone effects; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Chobiryo kagaku busshitsu no keisoku horumon eikyo sayo sokuteiho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Concerning the measurement system of ultra-micro hazardous chemical substances in the global environment, the paper examined the present situation of chemical substances such as dioxins, made an experimental study on the method to analyze dioxins in exhaust gas from an aspect of international consistency, and worked out a JIS draft. As to the standard measuring method of hormone effects of chemical substances, the paper developed the competitive bonding experiment system to measure bonding ability of chemical substances to homo sapiens estrogen receptor (ER). By measuring ER bonding ability of 78 kinds of chemical substances, the measuring method was developed. In the development of the assay system for detection of hormone-like compounds, the assay system with transfer activity via estrogen receptor as an index was established using cultured cells and yeast. Further, the development was made of a measuring method of receptor bonding activity of hormone-like substances. 33 refs., 151 figs., 66 tabs.

Fiscal 1998 research report on the demand forecast of rare element minerals, recycling technology of rare elements from waste, and substitute rare element minerals; 1998 nendo chosa hokokusho. Kisho genso koseki no juyo yosoku, kisho genso no haikibutsu kara no kaishu gijutsu oyobi daitai kisho genso koseki nado ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Rare element mineral is indispensable material for functionalization of high-tech raw materials. Its deposit is poor, an increase in its future demand is expected, and its information disclosure is insufficient because of strategic important material. To solve these problems, the following were studied systematically, and urgent research themes on rare element minerals were clarified: (1) High-efficiency recycling technology of rare elements, (2) Waste treatment system after recycling of rare elements from the viewpoint of environmental measures, (3) Establishment of the database of rare element minerals, and development of new substitute rare element minerals, and (4) Design method of substitute materials possible to generate various existing functions without any rare elements. Among them, in particular, precise separation of 46 kinds of rare elements from waste of high-tech raw materials, and recycling of rare elements from zinc refining waste and pyrite ore deposit containing copper were pointed out as important themes. (NEDO)

Fiscal 1997 survey report. Subtask 3 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (conceptual design of the total system/city-level energy estimation and assessment); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask zentai system gainen sekkei (toshi kibo deno yosoku hyoka)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper described the fiscal 1997 result of the study of scenarios for introducing hydrogen to the urban area. In the case of studying it in London, it was found that hythane (mixture of hydrogen into town gas) was effective, but in the case of doing in Tokyo, it was found that the scenario was undesirable because of the increasing infracost. Accordingly, another scenario was studied. It was assessed from the aspects of environmental advantages, infracosts, and potential advantageous values in urban areas associated with hydrogen utilization (hydrogen premium). It is most effective to use hydrogen as a fuel of transportation means from the aspect of environmental merits as the decrease in external cost. In Tokyo, the dependence upon electric power is large, and therefore it is attractive to introduce highly efficient fuel cells which enable the dispersed cogeneration using hydrogen. The value of hydrogen is determined by the avoidance of environmentally influential substances and the surplus generated output by fuel cells (substitution for the existing natural gas). When the high external cost can be assumed, the value of hydrogen becomes large. The paper also considered the arrangement of infrastructures in Tokyo. 187 refs., 14 figs., 18 tabs.

Fiscal 1997 report of the verification research on geothermal prospecting technology. Theme 5-2. Development of a reservoir change prospecting method (reservoir change prediction technique (modeling support technique)); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. 5-2. Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu (modeling shien gijutsu)) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

To evaluate geothermal reservoirs in the initial stage of development, to keep stable output in service operation, and to develop a technology effective for extraction from peripheral reservoirs, study was made on a reservoir variation prediction technique, in particular, a modeling support technique. This paper describes the result in fiscal 1997. Underground temperature estimation technique using homogenization temperatures of fluid inclusions among core fault system measurement systems was applied to Wasabizawa field. The effect of stretching is important to estimate reservoir temperatures, and use of a minimum homogenization temperature of fluid inclusions in quartz was suitable. Even in the case of no quartz in hydrothermal veins, measured data of quartz (secondary fluid inclusion) in parent rocks adjacent to hydrothermal veins well agreed with measured temperature data. The developmental possibility of a new modeling support technique was confirmed enough through collection of documents and information. Based on the result, measurement equipment suitable for R and D was selected, and a measurement system was established through preliminary experiments. 39 refs., 35 figs., 6 tabs.

Report on survey for high-performance industrial furnace introduction field test project in fiscal 1999. Verification work on achievements of industrial furnace development in 1999 by using theoretical method; 1999 nendo koseino kogyoro donyu field test jigyo chosa hokokusho. 1999 nendo koseino kogyoro kaihatsu seika no rironteki shuho ni yoru kakusho gyomu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The high-performance industrial furnace introduction field test project has been executed from fiscal 1998 through fiscal 2000. Fiscal 1999 has performed measurements, evaluations, analyses, and follow-ups on representative demonstration furnaces, subsequently from fiscal 1998. At the same time, theoretical discussions were given to understand the details of the achievements. The measurements and investigations on the representative demonstration furnaces verified remarkable enhancement in the waste heat recovery rate, and noticeable reduction in the fuel unit requirement. In order to understand in-furnace phenomena and heat conduction mechanisms, simulations were made on combustion gas flows, combustion reactions, and heat conduction by using three-dimensional and non-steady state continuous analyses. The method used is an effective method to elucidate the in-furnace gas temperature distribution in terms of space and time, and evaluate the heat conducting performance quantitatively. The result obtained in the current fiscal year on the overall heat absorption rate was found to be about the same value as for conventional furnaces. The temperature efficiency calculation value for the heat recovering device was 90 to 95%, which is much higher than that for the conventional furnaces of 30 to 60%. The calculation value for the fuel unit requirement was also reduced by 20 to 30% from that of the conventional furnaces. The simulation result is effective in understanding the heat conduction performance enhancing mechanism, having been supplemented by the measurements. (NEDO)

Effects of lactic acid bacteria in kimoto on sake brewing. Part 2. ; Promotion mechanism of enzymolysis in rice by teichoic acid. Kimotochu no nyusankin no seishu jozo ni oyobosu eikyo. 2. ; Kimotochu no nyusankin ni yuraisuru teikosan no. alpha. kamai yokai sokushin sayo kisaku

Energy Technology Data Exchange (ETDEWEB)

Mizoguchi, H.; Tsurumoto, M.; Furukawa, A.; Kawasaki, T. (Kikumasamune Sake Brewing Co. Ltd, Hyogo (Japan))

1991-07-25

In order to elucidate promotion mechanism of dissolution of {alpha}-rice (pregelatinized rice) by teichoic acid. adsorption of teichoic acid and {alpha}-amylase onto rice protein oryzenin was investigated by experiments. Teichoic acid was adsorbed well onto oryzenin and reduced adsorption of {alpha}-amylase. Adsorption of {alpha}-amylase onto rice powder was decreased logarithmically in proportion to the teichoic acid added. Both teichoic acid and {alpha}-amylase were adsorbed by histone, abundant in basic amino acids, and by anion-exchange resin. Adsorption of {alpha}-amylase onto them was reduced by coexistence with teichoic acid. As the results of experiments, it was inferred that teichoic acid became dissolvable through autolysis by lactic acid bacteria in kimoto, changed the state of electric charge on oryzenin surfaces through adsorption onto oryzenin by phosphoric group, decreasing adsorption of {alpha}-amylase onto oryzenin and increasing free {alpha}-amylase in the liquid phase, and thus increased the dissolution of {alpha}-rice. 9 refs., 6 figs., 3 tabs.

Desolvation of L-histidine and {alpha}-ketoisocaproic acid complex from ethanolate crystals under humidified conditions and influence of crystallinity on its desolvation; Histidine Ketoisocapron san ensan ethanol wamono kessho no koshitsudo jokenka deno datsu ethanol to datsu ethanol sei ni oyobosu kesshosei no eikyo

Energy Technology Data Exchange (ETDEWEB)

Kishimoto, S.; Tanabe, T.; Maruyama, S.; Kishishita, A.; Nagashima, N. [Ajinomoto Co. Inc., Tokyo (Japan)

1996-07-10

Desolvation of L-histidine and a-ketoisocaproic acid complex from ethanolate crystals was investigated. The ethanolate crystals were obtained from ethanol aqueous solutions of above 60 wt% of ethanol. It was difficult to remove ethanol molecules from the crystals lay vacuum drying. However, it was found that ethanol molecules in the crystal lattice could be released under humidified conditions, for example, 313 K and 60% relative humidity, accompanied by transformation to non-solvated crystals. When the peak of 2{theta}=9.0{degree}(CuK{alpha} radiation) in powder X-ray diffraction pattern of the ethanolate crystals was weak, ethanol molecules (about 1wt.%) remained in the crystals at the end of transformations and then the residual ethanol decreased slowly. A controlled moderate cooling process, where the supersaturation is released slowly, is the key point to obtain ethanolate crystals having high `crystallinity` (defined as peak height of 2{theta}=9.0{degree}) which shows quick desolation rather than adding ethanol for a rapid increase of supersaturation in crystallization. 6 refs., 7 figs.

Flow and mixing of gas in cylinder of a stratified charge engine with two intake valves. Effects of late closing valve timing and intake port configurations; Kyuki nibenshiki sojo kyuki engine no cylinder nai gas ryudo to kongo. Osotoji valve timing oyobi port keijo ni yoru eikyo

Energy Technology Data Exchange (ETDEWEB)

Charoenphonphanich, C; Niwa, H; Ennoji, H; Iijima, T [Tokai University, Tokyo (Japan)

1997-10-01

A numerical analysis of the flow and mixing of rich mixture and air inducted into the cylinder through each of the two intake ports of a stratified charge engine have been carried out. Numerical calculations were performed by finite volume method for three types of the intake port configurations: inverse V type, parallel type and V type and two types of valve timing; conventional and late closing (Miller cycle). Velocity field, turbulent kinetic energy and distribution of mixture concentration in the cylinder were examined. 3 refs., 10 figs.

Solidification of porous medium saturated with aqueous solution in a rectangular cell. ; Discussion on influence of initial concentration of solution and mean diameter of beads. Kukei sonai no suiyoeki de mitasareta takoshitsutai no gyoko. ; Shoki nodo to beads no heikin chokkei no eikyo ni kansuru kento

Energy Technology Data Exchange (ETDEWEB)

Matsumoto, K [Miyazaki University, Miyazaki (Japan). Faculty of engineering; Okada, M [Aoyama Gakuin University, Tokyo (Japan). School of Science and Engineering; Murakami, M [Toshiba Corp., Tokyo (Japan); Yabushita, Y [Sony Corp., Tokyo (Japan)

1993-11-25

Studies have been made for the purpose of analyzing solidification phenomenon of ground in relation to freezing construction method used in subway, water supply, and sewage constructions. Experimental studies have been carried out on solidification process of porous medium saturated with aqueous solution to discover influence of initial concentration of the solution and diameter of beads that constitute a porous medium. The experiment was performed by solidifying the porous medium sequentially from a side wall with lower temperature in a rectangular experimental tank with a height and a width of 100 mm filled with NaCl aqueous solution and beads. As a result, it was discovered that, if the initial concentration is low, the temperature difference is little between the upper part and the lower part of the experimental tank, and natural convection in the liquid-phase region is suppressed because of rising solidification temperature; the natural convection is suppressed in the liquid-phase region; and the boundary face between the mushy region and the liquid-phase region moves quickly. Further, the concentration rise in the liquid-phase region has slowed down despite that the solidification region is large enough. The smaller the mean diameter of beads, the faster the growth rate on the boundary face, hence the natural convection in the tank has been suppressed, and the growth rate on the boundary face has increased. In addition, the concentration stratification in the liquid-phase region does not expand, but is formed only on the bottom. 6 refs., 12 figs.

Effects of elasticity on the damping characteristics of viscous shearing damper and estimation curve for modal damping in stay cables with this type of dampers. Cable seishin'yo nensei sendangata damper no gensui fuka tokusei ni oyobosu banegosei no eikyo to sono sekkeiyo gensui hyoka kyokusen

Energy Technology Data Exchange (ETDEWEB)

Yoneda, M. (Kawada Industries Inc., Tokyo (Japan)); Shimoda, I. (Oiles Corp., Tokyo (Japan))

1993-12-20

Oil dampers and viscous shearing dampers have been used to control wind-induced cable vibrations of cable-stayed bridges. The damping addition efficiency in the case where only damping force of the viscous shearing damper is considered was discussed in the previous paper. In this paper, more precise estimation is done by also considering the spring elasticity of the damper. Arranging the results of an indoor excitation test on viscous shearing dampers using SA-P viscous body, an experimental equation to express the spring rigidity is derived. The spring elasticity becomes smaller with increasing temperature of viscous body, decreasing frequency, and increasing amplitude. Then, the damping addition effect is measured by installing the viscous shearing damper on the actual bridge cable, and is compared with the theoretical value resulting from the complex-eigenvalue analysis. Consequently, it is shown that the theoretical value is almost correspondent with the measured result through the analysis using equivalent coefficient of viscosity and equivalent spring constant, which are arranged in the experimental equation. Moreover, application examples of damping estimation curves for designing cables with dampers are given. 15 refs., 13 figs., 10 tabs.

FY 1998 survey report. Survey on reduction in environmental effect of greenhouse effect gas by the transfer of environmental technology in the Asian region; 1998 nendo chosa hokokusho. Asia chiiki ni okeru kankyo gijutsu iten ni yoru onshitsu koka gas no kankyo eikyo keigen ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Effects of the transfer of environmental technology were studied as an important policy for control of greenhouse effect gas in the Asian region. As schemes, those that were drew up by NEDO, JICA, etc. now exist and are used also in Japan. However, for the control of greenhouse effect gas emission which is expected to rapidly increase in future, it is indispensable to construct a new powerful and effective scheme in which technology transfer and fund to be given are organically connected. Especially, in the U.S., etc., the assistance of developing countries of a huge amount of money such as Japan's ODA is not extended. However, they position the environmental technology as an important strategy and is developing the assistance of developing countries by technology transfer and eco-business of private companies. Also in the eco-business field, the environment-related technology of Japanese companies is used in Asian developing countries, with expectations of its being a new business with international competitive strength. This is the subject for the whole global environment, and an important subject also for Japan which requires the creation of a new business field with international competitive strength. (NEDO)

Fiscal 2000 survey report. Survey of long-term energy technology strategy and the like (Survey of research management technique to contribute to formulation of long-term energy strategy); 2000 nendo choki energy gijutsu senryaku ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (choki energy senryaku sakutei nado ni kansuru kenkyu kanri shuho no chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of acquiring research management related basic materials necessary in the study of long-term energy strategy, a survey is conducted of the history, theory, and techniques of research management, the state of its utilization, and the products. The results of the survey are compiled into an introduction, itemized discussion, and materials. In the introduction, the purpose and basics of research management are discussed and confirmed. Taken up in the itemized discussion are an item (1) on research management relating to the selection of themes for research and development, which discusses the formulation of research and development strategy, selection of themes for research and development, formulation of plans for them, and a theme selection assisting system, an item (2) on research management relating to the management of research implementation, which discusses the management of implementation of research and development, interim assessment, and an implementation management assisting system, and an item (3) on the studies of key points for implementation and of research management for NEDO (New Energy and Industrial Technology Development Organization) to practice. As for the materials, they comprise commentaries on theories and techniques, an ex post facto assessment system and instances of assessment, list of persons related to research management, and commentaries on reference materials. (NEDO)

Properties of P/M forged Al-Si alloys made by premixed powders. 1. Influences of dispersion and sizes of proeutectic Si on wear resistance; Kongoho ni yotte sakuseishita Al-Si kei shoketsu tanzo gokin no tokusei. 1. Taimamosei ni oyobosu shosho Si no bunsan jotai to ryukei no eikyo

Energy Technology Data Exchange (ETDEWEB)

Ishijima, Z.; Ichikawa, J.; Sasaki, s.; Shikata, H. [Hitachi Powdered Metals Co. Ltd., Tokyo (Japan)

1995-10-15

Influences of dispersion and sizes of proeutectic Si on wear resistance of P/M Al-Si alloys using the prealloying method and premixing method have been investigated. As a result, discretely dispersed proeutectic Si showed excellent wear resistance in compassion with uniformly dispersed one. The cause is considered to be the unclosed Si soft phase which has been preferentially worn away, consequently acting on forming oil grooves and burying worn particles. Further more the existence of the optimum size of proeutectic Si on wear resistance was confirmed. In the case of finer particles, only Al-Si alloy (pin) was warned away substantially. On the other handgun the case of larger particles, both the Al-Si alloy (pin) and the mating malarial (steel disc) were excessively warned away. It is assumed therefore that the finer proeutectic Si particles are not effective as hard particles, on the contrary, larger proeutectic Si particles increase the abrasive wear against the mating material, and those buried into the mating material initiate wear of Al-Si alloy at the same time. 2 refs., 10 figs., 1 tab.

Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1993. 2. Research and development of physiological effect measuring technology (Part 1); 1993 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

Development in fiscal 1993 of a composite physiological function measurement method to measure stresses included the development of a watch type device using the tri-electrode double-point simultaneous measuring method for skin impedance, and a device placed around a head as a blinking meter using the simplified potential method. Both were reduced largely in size and weight. They were verified to have good performance by the measurement performance experiments. For noncontact skin temperature measurement, a noncontact temperature measuring system will be developed that automatically tracks movement of the head of a human body which moves within a limited area, and continuously measure temperatures of specific positions with measurement resolution of 0.2 degree C. Image processing utilizing sensor fusion of infrared and visible images was used to have extracted successfully persons under the natural background. A technology was developed to recognize specific portions of a face (eyes and eyebrows). Developments were made on an algorithm to measure directions of a head, and an attitude controlling and measuring system using a magnetic sensor. In measuring stress index materials, a prospect was obtained to realize semi-macro measurement by collecting cortisol and catecholamine from saliva. Discussions were also given on detecting catecholamine in urine by using high-speed liquid chromatography. (NEDO)

Emission behaviors of nitrous oxide from automobiles. 4th Report. Aging effect of three way catalyst on N2O mass emissions; Jidosha kara haishutsusareru asanka chisso (N2O) no haishutsu kyodo ni kansuru kenkyu. 4. Sangen shokubai no rekka ga N2O haishutsuryo ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Koike, N; Suzuki, H; Odaka, M [Traffic Safety and Nuisance Research Institute, Tokyo (Japan)

1997-10-01

Several kind of three way catalysts with different metal compositions have been developed for trial and their N2O formation behaviors before and after the durability tests have been observed. Then by comparing the N2O formation behavior between new and durability tested catalysts, N2O increase mechanism with aging has been experimentally analyzed. As results, A catalyst temperature at peak N2O formation will sift to higher side by the aging and enters in the range that is the higher percentage in use during test cycle driving. Then this is the main cause of increase in total N2O emission. 4 refs., 10 figs., 2 tabs.

Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1992. 2. Research and development of a physiological effect measuring technology (Part 1); 1992 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-03-01

This paper describes the physiological effect measuring technology, extracted from the achievements in the development of a technology to apply human senses to measurements in fiscal 1992. In the composite physiological function measuring technology to measure stresses, improvement was made on the skin impedance measuring device of tri-electrode double-point simultaneous measuring type. A non-contact measuring device using a light sensor was developed as a spontaneous blinking detecting system. A prototype device that can measure blood pressure continuously at the temple was developed, and its usefulness was verified. In non-contact skin temperature measurement, expansion was performed on the image input type visible camera, infrared ray camera and other systems produced to date, and hardware structuring was completed. For the software, person extracting, position recognizing and attitude determining algorithms were developed, whose effectiveness was verified experimentally. A prospect was reached that in measuring stress indexing substances, the measurement can be performed non-invasively using small amount of saliva and urine. The sensitivity was enhanced 20 to 5000 times in catecholamine, and ten times in corticosteroid as much as that in the previous year. It is estimated that on-line measurement may be executed on cortisol by using saliva sample of 100 to 200 {mu} L. (NEDO)

Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1993. 2. Research and development of physiological effect measuring technology (Part 2); 1993 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

The high-sensitivity brain wave measuring device has been given improvements in the simplified device net type brain wave sensor that has been improved in fiscal 1993, eliminating the steamy feeling in the head, giving better fitting feeling, and having cleared the target. The multiple application telemeter had the stability enhanced, making it possible to measure living organism signals such as electromyogram, electrocardiogram, eyeball movements, and respiration. To measure living organism activity and rhythm, development was made on a method to evaluate these subjects by using substitution characteristics with development of a portable monitor kept in mind. Measurement and evaluation methods were prepared on the living organism activity from the comparison of the autonomic nervous system activity derived from continuous measurement of pulse cycles with the change in spectra in the {alpha} brain wave. An intestinum rectum temperature correction filter using the number of pulses was fabricated to introduce a body temperature rhythm curve excluded of effects of the body activity. The living organism activity was evaluated comprehensively from the contrast between the daily activity variation and the circadian rhythm. Improvement of accuracy of the tympanum temperature sensor was also discussed. In developing the accelerated pulse meter, the size of the transmitter was reduced, a filter was developed to reduce obstruction signals contained in the signals, and development was begun on a personal computer based system. (NEDO)

Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1992. 2. Research and development of a physiological effect measuring technology (Part 2); 1992 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-03-01

This paper describes the physiological effect measuring technology, extracted from the achievements in the development of a technology to apply human senses to measurements in fiscal 1992. Primary prototype fabrication and evaluation were given on an easy-to-mount high-sensitivity brain wave measuring instrument. The multiple application telemeter has come close to completion excepting the integration. For multi-point brain wave measurement, analyzing device interface was completed. In measuring living organism activity and rhythm, development was made on an evaluation method that uses substituting characteristics, with a portable monitor kept in mind. The activity generated by power spectrum change in the {alpha} brain wave was compared with that in the autonomic nervous system to derive the mutual relationship therein, whereas usefulness of the pulse cycle characteristics was verified. Development was made on a method to measure and analyze the tympanum temperature rhythm that corresponds to the intestinum rectum rhythm, and the tympanum temperature was measured discretely by using an infrared sensor. Verification was given on the correlation between the circadian rhythm derived from the intestinum rectum temperature and that derived from the discrete measurement. In developing a nonrestraind accelerated pulse meter, a transmitter of the small accelerated pulse meter that can measure pulses under non-invasive and nonrestraint condition was fabricated on a trial basis, whose easiness of mounting and possibility of signal transmission were demonstrated. (NEDO)

Study on the energy performance of an energy producing and saving house. Part 3. Measurement results of the connecting system to the power grid and prediction of the PV system electric generation residence in Kyushu; So sho energy seino ni kansuru kenkyu. 3. Gyakuchoryu keito renkei system no nenkan jisseki to Kyushu ni okeru jutaku deno hatsudenryo yosoku

Energy Technology Data Exchange (ETDEWEB)

Ishihara, O.; Sakai, K.; Hirakawa, M. [Kumamoto University, Kumamoto (Japan). Faculty of Engineering

1997-11-25

Two-year study of an energy-producing/-saving house equipped with a 5kWp photovoltaic power generation system is described, in which the track records of this system capable of back-flow and system interconnection and inverter performance are analyzed, and the power expected to be obtained when photovoltaic power generation systems are installed in some residential houses in the Kyushu area is predicted. In the analysis of the yearly variance in the demand/supply of electric power, it turns out that more is generated in spring than in summer, which is thanks to the good weather in spring, typhoons in summer, and power generation efficiency degraded due to temperature rise in the modules. The amount of photovoltaic cell module-generated power is estimated by performing a multiple regression analysis involving the amount of insolation, outside air temperature, and wind speeds. Furthermore, available power is calculated using a relational expression involving inverter performance. On the assumption of 3kW-capacity photovoltaic power generation systems installed at residential houses at various locations across Kyushu, the expected amount of power to be generated is calculated, which proves to be approximately 3000kWh a year, confirming the effectiveness of the photovoltaic power generation system. 6 refs., 9 figs., 3 tabs.

FY 1998 report on the development of technology for reservoir mass and heat flow characterization. Theme 5-2. Monitoring and modeling of reservoir mass and heat flows (Integrated reservoir modeling and simulation techniques/Modeling support technique); 1998 nendo chinetsu tansa gijutsu nado kensho chosa choryuso hendo tansaho kaihatsu hokokusho (yoyaku). 5-2. Choryuso hendo yosoku gijutsu (modeling shien gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This R and D are aimed at establishing technology to support the reservoir modeling work required for predicting the reservoir variation from the geological/geochemical side. The contents of the development are (1) establishment of the practical measuring system for core fracture system, and (2) establishment of new modeling support technology. In (1), as the core fraction system measuring system, the measurement of fluid inclusion homogenization temperature and melting point and laser Raman spectroscopy were applied to the Wasabizawa area to obtain the results. In (2), the R and D were conducted of a rapid age measuring method for altered rock/unaltered rock and an analytical method for fluid flow using trace chemical components of hydrothermal minerals. In the former, 3-D thermoluminescent intensity of the age-known quartz was measured. The TL age of weak altered rock of Kijiyama dacite in the Wasabizawa area was 320Ka, almost the same result as 320Ka already reported. In the latter, trace components of quartz were measured at each well, and changes in the depth direction were made clear. It was made clear that the variation of Na/K ratio is large around the lost circulation stratum. The geothermal fluid flow was made clear by the analysis of similarity of the intensity ratio. (NEDO)

FY 1991 report on the results of the contract R and D of the human sense measuring application technology. 2. R and D of the physiological effect measuring technology (2); 1991 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu (2)

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

In this paper, the following were studied: (1) easy-wearing net-type brain wave sensor and multi-purpose telemeter; (2) multi-point brain wave measurement. In this fiscal year, the fundamental design and evaluation of these were conducted. In (1), conducted were the study of specifications of system and shape as fundamental design of easy-wearing net-type brain wave sensor, and the evaluation using functional works. As fundamental design of multi-purpose telemeter, studied were the detailed specifications of transmitter and receiver and the system design. In (2), as fundamental design of multi-point brain wave sensor (64 electrodes), conducted were the specifications of system and shape of 19 electrode sensors and the evaluation using functional works trially made. As fundamental design of the analyzer interface, a system was studied for taking brain wave signals of 64 channels into the analyzer by analog/digital conversion. As to the interpolation system of topography, the following were carried out: study of the optimum interpolation system for estimating the electric potential at the portion where the electrode is not installed, based on the electric potential at the portion where 64 brain wave electrodes are installed; and evaluation of the interpolation system using topography by 12-21 electrodes as the pre-stage of 64 electrodes. (NEDO)

Research on variable swirl intake port for high-speed multivalve DI diesel engine. Effects of port configuration on flow characteristics and swirl generation capacity; 4 ben kogata kosoku DI diesel engine no kahen swirl kyuki port ni kansuru kenkyu. Kyuki port haichi ga ryudo tokusei to swirl seino ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Kawashima, J; Ogawa, H; Tsuru, Y [Nissan Motor Co. Ltd., Tokyo (Japan)

1997-10-01

In our previous papers, the variable swirl intake port system which can control a wide swirl ratio range (from 4 to 10) was described. This system consisted of two separate intake ports, one of them has a flow control valve for changing the swirl ratio. In this type of variable swirl system, some variations of port combination, port shape, and position can be designed. In this paper, the intake flow characteristics of various port combinations were analyzed on the basis of a steady-state air flow test and 3-dimensional computations. The results indicate that the total performance of the twin ports can be estimated from that of a single port in any kind of port combination. Some difference in flow patterns were found in a variety of port combinations even if each swirl ratio is similar. The selected port combinations in our previous study are good for a wide swirl control range. 11 refs., 9 figs., 1 tab.

Fiscal 1997 survey of overseas coal import base arrangement and promotion. Effects of the expansion of coal trade by IPP on the supply/demand of general coal in Asia; 1997 nendo kaigaitan yunyu kiban seibi sokushin chosa. IPP ni yoru sekitan boeki no kakudai ga Asia no ippantan jukyu ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In consideration of the coal situation in the Asia/Pacific region, a study was made of effects of the expansion of coal trade by IPP on supply/demand of general coal in Asia. When aggregating increases in demand of general coal for electric power use in ten Asian counties, they will be an increase of 130.75 million tons in 2005 over 1997. Fifty nine percent of it is equivalent to the increase by IPP and exceeds the demand expanded by electric utilities operators. Further, a possibility is predicted of contracts and coal quality being different from until now. However, there will be a lot of cases in which plans of constructing power plants in Asia are not so developed as expected except Japan, Korea and Taiwan, and also the effect of the currency crisis starting in Thailand largely affects. In terms of the coal supply, countries which export general coal are only China and Indonesia. Indonesian coal is expanding its production and export rapidly and remarkably. The environmental control in Asia has been tightening, and the fuel selected by IPP is mainly coal rather than natural gas. 40 refs., 94 figs., 179 tabs.

Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1994. 2. Main issue (Part 1 for research and development of a physiological effect measuring technology); 1994 nendo ningen kankaku keisoku oyo gijutsu no kekyu kaihatsu. 2. Honronhen (Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

This research and development was performed on (1) a composite physiological function measuring technology for stress measurement, (2) a contact-free skin temperature measuring technology, and (3) a stress indexing substance measuring technology. With regard to the subject (1), the target for the current fiscal year is to restructure a small restraint-free skin impedance measuring device into a practical device that can be used easily at working sites. In order to achieve the goal, electric power conservation and size reduction were moved forward by improving the circuit design, and stabilized measurement, in which the measurement algorithm is made more intelligent, was realized. With regard to the subject (2), the contact-free skin temperature measurement device having been structured by the previous fiscal year was given improvements in such parts as the infrared and visible image input, image processing, and data indication and sense volume estimation. With respect to the subject (3), the technology was established to measure such stress indexing substances as CS and CA from saliva. Positioning of CS and CA as the stress indexing substance was nearly completed. The stress indexing substance measuring device was tried of structuring the prototype A and prototype B applying the semi-micro specifications for an attempt of clearing the steps toward practically usable device. (NEDO)

FY 1991 report on the results of the contract R and D of the human sense measuring application technology. Volume 2. R and D of the physiological effect measuring technology (Part 1); 1991 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-03-01

Targets of the total development is to develop technology to non-invasively/simply measure changes in physiological function for physical and mental stimuli and to develop a human sense measuring technology needed to realize 'comfortableness.' As a part of it, the following R and D were conducted in this fiscal year. As to the R and D of skin impedance measuring, measuring methods such as the conducting method and potential method were studied. Further, an experiment with a person to be tested was conducted using the experiment use electrode. And detected were skin impedance changes caused by mental strain stress which were distinguished from changes caused by external environment. As the blink reflection measuring method, the paper took up the eyelid micro-vibration method under consideration and verified effectiveness of the method. The data were acquired using the same person as tested in the above-mentioned experiment when he is not tired, and the extraction of parameters of blink reflection which change according to working loads was studied. As to the continued blood pressure measuring technology, a measuring method which gives no loads on the person tested was studied, and the measuring portion where stable output can be obtained was selected. In addition, small/lightweight continued blood pressure measuring instrument which can be used in daily life was trially manufactured and designed. (NEDO)

Effects of sintering and paste-baking conditions on PTCR characteristic of (Ba,Sr)TiO{sub 3} vacuum-sintered compact added with TiO{sub 2}(Ti) powder; TiO{sub 2}(ti) fun tenka (Ba,Sr)TiO{sub 3} shinku shoketsutai no PTCR tokusei ni oyobosu shoketsu oyobi paste yakitsuke joken no eikyo

Energy Technology Data Exchange (ETDEWEB)

Kim, J.; Hayashi, K. [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science

1999-04-15

The effects of sintering temperature (T{sub s}; 1,573 {approx} 1,748K) and time (t{sub s}; 0.6 {approx} 14.4ks) and paste-baking-temperature or heating temperature (T{sub b} or T{sub h}; 673 {approx} 1,273K; t{sub b} is 0.3ks) on PTCR characteristic were investigated for (Ba, Sr)TiO{sub 3} vacuum-sintered compact added with 3.9mass% TiO{sub 2}(Ti) powder of 12.5mass% TiO{sub 2}. The results obtained were as follows; (1) PTCR characteristic developed at all T{sub s} (t{sub s}=3.6ks, T{sub b}=853K). The electrical resistivity at room temperature ({rho}{sub rt}) showed a minimum value of 1.8 times 10{sup 2}ohmcenter dotcm and the {rho}{sub max}/{rho}{sub rt} showed a maximum value of about 10{sup 6} at 1,723K. (2)For all t{sub s} (T{sub s}=1,623K, T{sub b}=853K), PTCR characteristic developed. The {rho}{sub rt} showed a minimum value of 2.6 times 10{sup 3}ohmcenter dotcm at 7.2ks. (3) At T{sub b} above 823K (T{sub s}=1,623K, t{sub s}=3.6ks), PTCR characteristic developed. The {rho}{sub rt} showed a minimum value of 1.0 times 10{sup 3}ohmcenter dotcm. (4)The {rho}-T curve of (Ba, Sr)TiO{sub 3}+TiO{sub 2}(Ti) vacuum-sintered compact was affected more largely by T{sub s}, t{sub s} and T{sub b} than that of (Ba, Sr)TiO{sub 3} air-sintered compact. This was considered to be mainly due to the porous and fine gained microstructure in the former compact. (author)

Fiscal 1999 research result report on energy and environment technology demonstration research support project (International joint demonstration research project). Improvement of long-distant power transmission efficiency and reliability, and its environmental impact assessment; 1999 nendo chokyori soden hoshiki ni kansuru soden koritsu to soden shinraido no kojo oyobi kankyo eno eikyo hyoka seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Japan-Russia international joint research was made on overhead ultrahigh-voltage DC power transmission lines for transmission loss reduction and reliability improvement, and an optimum international power supply cable system, considering energy saving and environment conservation. Using the European-Russian DC power transmission line of {+-}500kV and 4GW as a model, comparison was made between a model using Russian round strands and glass insulators and a model using Japanese low-loss wires and insulators. As for improvement of the reliability in cold districts, Russian design techniques for tower structure and ice loading were reasonable to counteract galloping oscillation and ice load. In evaluation and selection of optimum underground and marine cables, study was made on cable specifications using the Turkey-Russia power transmission route as a model. The environmental assessment result of these cables showed that XLPE cable under development is optimum. (NEDO)

FY 1991 report on the results of the contract R and D of the human sense measuring application technology. Volume 2. R and D of the physiological effect measuring technology (Part 1); 1991 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-03-01

Targets of the total development is to develop technology to non-invasively/simply measure changes in physiological function for physical and mental stimuli and to develop a human sense measuring technology needed to realize 'comfortableness.' As a part of it, the following R and D were conducted in this fiscal year. As to the R and D of skin impedance measuring, measuring methods such as the conducting method and potential method were studied. Further, an experiment with a person to be tested was conducted using the experiment use electrode. And detected were skin impedance changes caused by mental strain stress which were distinguished from changes caused by external environment. As the blink reflection measuring method, the paper took up the eyelid micro-vibration method under consideration and verified effectiveness of the method. The data were acquired using the same person as tested in the above-mentioned experiment when he is not tired, and the extraction of parameters of blink reflection which change according to working loads was studied. As to the continued blood pressure measuring technology, a measuring method which gives no loads on the person tested was studied, and the measuring portion where stable output can be obtained was selected. In addition, small/lightweight continued blood pressure measuring instrument which can be used in daily life was trially manufactured and designed. (NEDO)

Combustion-driven oscillation in a furnace with multispud-type gas burners. 4th Report. Effects of position of secondary air guide sleeve and openness of secondary air guide vane on combustion oscillation condition; Multispud gata gas turner ni okeru nensho shindo. 4. Nijigen kuki sleeve ichi oyobi nijigen kuki vane kaido no shindo reiki ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Akiyama, I.; Okiura, K.; Baba, A.; Orimoto, M. [Babcock-Hitachi K.K., Tokyo (Japan)

1994-07-25

Effects of the position of a secondary air guide sleeve and the openness of a secondary air guide vane on combustion oscillation conditions were studied experimentally for multispud-type gas burners. Pressure fluctuation in furnaces was analyzed with the previously reported resonance factor which was proposed as an index to represent the degree of combustion oscillation. As a result, the combustion oscillation region was largely affected by both position of a guide sleeve and openness of a guide vane. As the openness having large effect on the ratio of primary and secondary air/tertiary air and the position hardly having effect on the ratio were adjusted skillfully, the burner with no combustion oscillation region was achieved in its normal operation range. In addition, as the effect of preheating combustion air was arranged with a standard flow rate or mass flow flux of air, it was suggested the combustion oscillation region due to preheating can be described with the same manner as that due to no preheating. 5 refs., 8 figs.

Change of environmental factors in different site which effect the conversion efficiency of photovoltaic module. Comparison of the environmental factors in Shinjuku Tokyo with the one in Chino Nagano; Kotonaru chiten ni okeru taiyo denchi no henkan koritsu ni eikyo wo ataeru kankyo inshi no henka. Tokyoto Shinjukuku to Naganoken Chinoshi no kankyo inshi no hikaku

Energy Technology Data Exchange (ETDEWEB)

Higuchi, T.; Tani, T.; Hirata, Y.; Inasaka, T. [Science University of Tokyo, Tokyo (Japan)

1997-11-25

Environmental factors affecting conversion efficiency of solar cells were measured in Tokyo and Nagano to comparatively study the difference. In the study, measurement was made of intensity of global solar radiation on an inclined surface (insolation intensity), ambient air temperature, and distribution of spectral solar radiation at the two points. Also measured were output characteristics of polycrystal silicon solar cell modules and amorphous silicon solar cell modules. The result of the comparative analysis was as follows: The annual inclined global solar radiation amount integrated in 1996 is 27% more in Nagano than in Tokyo. The weighted average insolation intensity in Nagano is 0.09 kW/m{sup 2} higher in Tokyo. The weighted average cell temperature in Nagano is 4degC lower than in Tokyo. The effective spectral ratio in Nagano is 1-2% lower both in polycrystal Si and amorphous Si than in Tokyo. Thus, it was inferred from that environmental factors are different that conversion efficiencies of photovoltaic modules were different. 6 refs., 5 figs., 5 tabs.

Report on the survey in fiscal 1998. A survey on long-term energy technology strategy (a survey related to arrangement of information groups and aiding means for establishing policies related to research and development of energy and environment technologies); 1998 nendo choki energy gijutsu senryaku chosa. Energy kankyo gijutsu kenkyu kaihatsu ni kakawaru seisaku kettei no tame no johogun no seibi narabi ni shien shuho ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This paper discusses aiding means for establishing the research and development strategy for maximizing greenhouse effect gas reduction for a short period (year 2010) and an ultra long period (year 2030 and on). First, the situation surrounding the existing energy and environment technologies and technological assignments (themes) were put into order. Rough calculations were made on the selected themes as to their effect of greenhouse effect gas reduction. Based on the result of these reduction amount calculations, provisionary introduction scenarios including analyses by groups and users were prepared according to each theme. On the other hand, data groups related to the energy and environment technologies were investigated and put into order. The data groups include literatures and achievements of the past researches, and are expected of utilization for estimating the introduction potential to calculate effects of future research and development. In addition, discussions were given on methods to analyze cost-effect relationship in the energy and environment technologies. Importance was placed on the case surveys inside and outside the country, and simple models suitable for themes in the New Sunshine Project were built for an attempt of case studies. (NEDO)

Analysis and evaluation for practical application of photovoltaic power generation system. Analysis and evaluation for thin substrate polycrystalline solar cells (alloy-base amorphous materials, PIN layers, strains in the interface, and effects of impurities); Taiyoko hatsuden system jitsuyoka no tame no kaiseki hyoka. Usumaku taiyo denchi jitsuyoka no tame no kaiseki hyoka (gokinkei amorphous zairyo pin kakuso kaimen ni okeru yugami fujunbutsu nado no eikyo)

Energy Technology Data Exchange (ETDEWEB)

Matsuda, A; Oeda, H; Yamasaki, S; Hata, N; Kondo, M; Toshima, Y; Sakata, I; Ganguly, G; Suzuki, A; Kamei, T; Okushi, H; Nonaka, H; Oda, N; Katagiri, H; Ichimura, N; Kokubu, K; Nakamura, K; Sekikawa, T; Yamanaka, M [Electrotechnical Laboratory, Tsukuba (Japan)

1994-12-01

Described herein are the results of the FY1994 research program for analysis and evaluation for thin film solar cells. The study on quantitative analysis of hydrogen atoms in a plasma determines quantity of hydrogen atoms in the plasma of monosilane diluted with hydrogen. It is found, contrary to expectation, that quantity of hydrogen atoms in the plasma decreases as it is more diluted with hydrogen. The study on light-induced degradation of the thin chlorine-base amorphous silicon films confirms that the plasma CVD method with 20% of dichlorosilane gas added to monosilane gas produces the thin amorphous silicon film 3 times faster than the conventional method. The thin film has essentially the same defect density as the one prepared by the conventional method, showing good photoelectric characteristics. The thin film of chlorinated amorphous silicon has a 1 digit lower defect density than the conventional one of amorphous silicon, as revealed by the accelerated degradation test with irradiated laser light and the constant current method to determine saturated defect density. 3 figs.

Advanced research and development of gas hydrate resources. R and D of exploration and others - R and D of excavation technologies and others - surveys/researches on methods of evaluating environmental effects - surveys/researches on application systems; Gas hydrate shigenka gijutsu sendo kenkyu kaihatsu. Tansa nado ni kansuru kenkyu kaihatsu / kussaku gijutsu nado ni kansuru kenkyu kaihatsu / kankyo eikyo hyokaho no chosa kenkyu / riyo system ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Gas hydrate is a clathrate compound in a gaseous molecule as the host, stable under relatively mild environments. It is deposited in the 600m or deeper sea bottoms to form the gas hydrate deposit and massively occurring in the sea areas around Japan. This deposit has been studied viewed from natural gas resources, causes for natural hazards and contribution to the global warming. This project excavates a well in the deposit, to study possibilities of the technologies for decomposing, fluidizing and lifting the hydrate as the gas source, and for establishing the natural gas transporting/mooring systems in which its characteristics are utilized. The R and D activities are directed to the 4 areas, (1) development of the exploration technologies to determine the deposit sea area, quantity and conditions, (2) development of the stable well-excavation technologies, (3) studies on the effects of gas production on the environments, and development of the system for predicting the effects, (4) and studies on the application systems. The item (3) finds out the transportation/storage system possibly more economical than the current freezing/liquefaction technologies. The item (3) has the development themes of evaluating the geohazards caused by excavation and gas production, and their effects on the ecological systems. (NEDO)

FY 1998 annual report on the preliminary research and development of techniques for developing resources from gas-hydrate. Studies on gas-hydrate exploration, excavation techniques, methods for assessing environmental impacts, and gas hydrate handling systems; 1998 nendo gas hydrate shigenka gijutsu sendoken kaihatsu seika hokokusho. Tansanado ni kansuru kenkyu kaihatsu, kussaku gijutsu nado ni kansuru kenkyu kaihatsu, kankyo eikyo hyokaho no kenkyu kaihatsu, riyo system ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This R and D project is for the preliminary studies on development of the following 4 types of techniques for developing resources from gas-hydrates (GH): (1) gas-hydrate exploration, (2) excavation techniques, (3) methods for assessing environmental impacts, and (4) gas hydrate handling systems. The FY 1988 R and D results are described. For gas-hydrate exploration, the methods for analyzing inorganic ions and trace quantities of elements, which are necessary for accurately estimating the offshore GH around Japan, are established; and case studies are conducted for methods of predicting GH deposit forming mechanisms, and stability fields of GH, based on terrestrial heat flow and seismic data. For excavation techniques, GH decomposition rate is analyzed using a laboratory system which reproduces conditions of excavation of GH layers. For methods for assessing environmental impacts, a geo-hazard predicting model is established, to study ground displacement and gas leakage sensing systems and data transmission systems to cope with the hazards. For gas hydrate handling systems, an overall system is studied, and storage and transportation systems are outlined. (NEDO)

Report on the achievements in fiscal 1999. Technology to use gas hydrate as a resource (Research and development for exploration, research and development on drilling technologies, investigative research on an environment influence evaluation method, and investigative research on a utilization system); 1999 nendo gas hydrate shigenka gijutsu sendo kenkyu kaihatsu seika hokokusho. Tansa nado ni kansuru kenkyu kaihatsu, kussaku gijutsu nado ni kansuru kenkyu kaihatsu, kankyo eikyo hyokaho no chosa kenkyu, riyo system ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The contents of the research and development performed in the current fiscal year are as follows: (1) research and development for exploration, (2) research and development on drilling technologies, (3) investigative research on an environment influence evaluation method, and (4) investigative research on a utilization system. In Item (1), element analysis data are used to study a method to estimate production environment of hydrate ore beds by using an inorganic ion analyzer and a trace amount element analyzer, the crust thermal flow measuring method is used to discuss a method to analyze the hydrate stability zones together with the data of sea area exploration records, and conceptual design is made on a resource potential evaluation system. In Item (2), experiments and analytical discussions are performed on decomposition control of the gas hydrate solid-liquid interface according to such conditions for the drilling fluid as temperatures and flow rates. Elucidation is given on the initial process of bubble generation for behavior of decomposed gas bubbles. Observation and elucidation are made on two-phase flow behavior of non-Newtonian fluid. In Item (3), conceptual design is carried out on a system to detect elements of shape change in each bed due to fluid movement in a gas hydrate bed and an upper bed. In Item (4), discussions are given on the optimizing conditions for generation and dissociation of gas hydrates. Investigation is made also on a possibility of the transportation and storage system. (NEDO)

Achievement report for fiscal 1997 on the research and development to lead to gas hydrate using technology. Research and development on exploration, research and development on drilling technologies, survey and research on a method to evaluate environmental impact, and survey and research on a utilization system; 1997 nendo gas haidoreto shigenka gijutsu sendo kenkyu kaihatsu seika hokokusho. Tansanado ni kansuru kenkyu kaihatsu, kussaku gijutsu ni kansuru kenkyu kaihatsu, kankyo eikyo hyokaho no chosa kenkyu, riyo system ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-01

The present study is intended to analyze comprehensively geophysical, geological and geochemical data, and establish a technology to estimate distribution of gas hydrate (GH) in sea areas around Japan. It is also intended to develop a high-accuracy resource amount calculating method utilizing the result of excavation of GH planned in the future. In order to achieve these goals, the following activities are performed: (1) study on a method to estimate production environment of GH deposits, (2) development of a method to estimate GH stability areas by using the crust thermal flow measuring method, and (3) study on estimation of GH distribution and wide-area potential. For the study (1), an inorganic element analyzer was introduced, and calibration of devices was performed in fiscal 1997. A survey was carried out on literatures related to distribution of inorganic elements and process of GH deposit production. In the study (2), design and trial fabrication were executed on a high-accuracy crust thermal flow measuring device, capable of long-term continuous observation. In the study (3), re-processing focusing on BSR was implemented by using the latest computer and analysis software on the data in which BSR has been confirmed in the surveys done in the past on sea areas around Japan. (NEDO)