WorldWideScience

Sample records for efficient miniaturized production

  1. Miniature, high efficiency transducers for use in ultrasonic flow meters

    Science.gov (United States)

    Saikia, Meghna

    This thesis is concerned with the development of a new type of miniature, high efficiency transducer for use in ultrasonic flow meters. The proposed transducer consists of a thin plate of a suitable piezoelectric material on which an inter-digital transducer is fabricated for the generation and detection of plate acoustic waves. When immersed in a fluid medium, this device can convert energy from plate acoustic waves (PAWs) into bulk acoustic waves (BAWs) and vice versa. It is shown that this mode coupling principle can be used to realize efficient transducers for use in ultrasonic flow meters. This transducer can be mounted flush with the walls of the pipe through which fluid is flowing, resulting in minimal disturbance of fluid flow. A prototype flow cell using these transducers has been designed and fabricated. The characteristics of this device have been measured over water flow rates varying from 0 to 7.5 liters per minute and found to be in good agreement with theory. Another attractive property of the new transducers is that they can be used to realize remotely read, passive, wireless flow meters. Details of methods that can be used to develop this wireless capability are described. The research carried out in this thesis has applications in several other areas such as ultrasonic nondestructive evaluation (NDE), noncontact or air coupled ultrasonics, and for developing wireless capability in a variety of other acoustic wave sensors.

  2. Design and developement of energy efficient miniature devices for energy harvesting, thermal management and biomedical applications

    OpenAIRE

    Çıkım, Taha Abdullah; Cikim, Taha Abdullah

    2014-01-01

    This thesis aims to make contributions to the literature in the field of energy efficient miniature devices for energy harvesting, thermal management and biomedical applications. In the first part, experimental results related to energy harvesting capability of a miniature power reclamation device based on external liquid flows are represented. The device’s reclamation principle depends on the conversion of mechanical energy into electrical energy. The mechanical energy in the device was gene...

  3. Production of nanocellulose in miniature-bioreactor: Optimization and characterization.

    Science.gov (United States)

    Khazeni, Sepideh; Hatamian-Zarmi, Ashrafalsadat; Yazdian, Fatemeh; Mokhtari-Hosseini, Zahra Beagom; Ebrahimi-Hosseinzadeh, Bahman; Noorani, Behnam; Amoabedini, Ghassem; Soudi, Mohammad Reza

    2017-04-21

    Bacterial cellulose (BC) is a very fascinating microbial biopolymer which is mainly produced by Gluconacetobacter xylinum. Optimization of BC production by G. xylinum was performed based on scale-down studies in miniature-bioreactor and response surface methodology in which the optimum pH value (6.5) and shaking rate (50 rpm) were obtained. The static culture condition for BC production has newly been defined. Nanostructure of BC includes nanofibers up to (60 nm) and nanoporosity up to (265 nm) was observed by scanning electron microscopy. By Fourier transform infrared spectroscopy study, the most expected BC interaction is nucleophilic interaction. MTT assay showed high biocompatibility. Appropriate mechanical strength (0.37 MPa) and Young's modulus (3.36 MPa) evinced BC scaffold utilization for skin tissue. The results indicate that BC sheets can be utilized in biomedical application and nanotechnology approaches.

  4. Construction of miniature silver-zinc batteries and the technology for their mass production

    Energy Technology Data Exchange (ETDEWEB)

    Kwasnik, J.; Lapinski, H.

    1982-07-01

    The construction and production technology of miniature silver-zinc batteries has been developed in the Central Laboratory of Batteries and Cells in Poznan. At the same time a modern assembly line for the mass production of type SR 43 and SR 44 batteries, with an output of 2 million units/year has been designed and commissioned. The batteries are for use in miniature electronic devices such as wrist watches, pocket calculators, hearing aids, etc.

  5. Comparison of the efficiency of Banna miniature inbred pig somatic cell nuclear transfer among different donor cells.

    Directory of Open Access Journals (Sweden)

    Hongjiang Wei

    Full Text Available Somatic cell nuclear transfer (SCNT is an important method of breeding quality varieties, expanding groups, and preserving endangered species. However, the viability of SCNT embryos is poor, and the cloned rate of animal production is low in pig. This study aims to investigate the gene function and establish a disease model of Banna miniature inbred pig. SCNT with donor cells derived from fetal, newborn, and adult fibroblasts was performed, and the cloning efficiencies among the donor cells were compared. The results showed that the cleavage and blastocyst formation rates did not significantly differ between the reconstructed embryos derived from the fetal (74.3% and 27.4% and newborn (76.4% and 21.8% fibroblasts of the Banna miniature inbred pig (P>0.05. However, both fetal and newborn fibroblast groups showed significantly higher rates than the adult fibroblast group (61.9% and 13.0%; P<0.05. The pregnancy rates of the recipients in the fetal and newborn fibroblast groups (60% and 80%, respectively were higher than those in the adult fibroblast group. Eight, three, and one cloned piglet were obtained from reconstructed embryos of the fetal, newborn, and adult fibroblasts, respectively. Microsatellite analyses results indicated that the genotypes of all cloning piglets were identical to their donor cells and that the genetic homozygosity of the Banna miniature inbred pig was higher than those of the recipients. Therefore, the offspring was successfully cloned using the fetal, newborn, and adult fibroblasts of Banna miniature inbred pig as donor cells.

  6. An efficient miniature 120 Hz pulse tube cryocooler using high porosity regenerator material

    Science.gov (United States)

    Yu, Huiqin; Wu, Yinong; Ding, Lei; Jiang, Zhenhua; Liu, Shaoshuai

    2017-12-01

    A 1.22 kg coaxial miniature pulse tube cryocooler (MPTC) has been fabricated and tested in our laboratory to provide cooling for cryogenic applications demanding compactness, low mass and rapid cooling rate. The geometrical parameters of regenerator, pulse tube and phase shifter are optimized. The investigation demonstrates that using higher mesh number and thinner wire diameter of stainless steel screen (SSS) can promote the coefficient of performance (COP) when the MPTC operates at 120 Hz. In this study, the 604 mesh SSS with 17 μm diameter of mesh wire is constructed as filler of regenerator. The experimental results show the MPTC operating at 120 Hz achieves a no-load temperature of 53.5 K with 3.8 MPa charging pressure, and gets a cooling power of 2 W at 80 K with 55 W input electric power which has a relative Carnot efficiency of 9.68%.

  7. Production of cloned NIBS (Nippon Institute for Biological Science) and α-1, 3-galactosyltransferase knockout MGH miniature pigs by somatic cell nuclear transfer using the NIBS breed as surrogates.

    Science.gov (United States)

    Shimatsu, Yoshiki; Yamada, Kazuhiko; Horii, Wataru; Hirakata, Atsushi; Sakamoto, Yuji; Waki, Shiori; Sano, Junichi; Saitoh, Toshiki; Sahara, Hisashi; Shimizu, Akira; Yazawa, Hajime; Sachs, David H; Nunoya, Tetsuo

    2013-01-01

    Nuclear transfer (NT) technologies offer a means for producing the genetically modified pigs necessary to develop swine models for mechanistic studies of disease processes as well as to serve as organ donors for xenotransplantation. Most previous studies have used commercial pigs as surrogates. In this study, we established a cloning technique for miniature pigs by somatic cell nuclear transfer (SCNT) using Nippon Institute for Biological Science (NIBS) miniature pigs as surrogates. Moreover, utilizing this technique, we have successfully produced an α-1, 3-galactosyltransferase knockout (GalT-KO) miniature swine. Fibroblasts procured from a NIBS miniature pig fetus were injected into 1312 enucleated oocytes. The cloned embryos were transferred to 11 surrogates of which five successfully delivered 13 cloned offspring; the production efficiency was 1.0% (13/1312). In a second experiment, lung fibroblasts obtained from neonatal GalT-KO MGH miniature swine were used as donor cells and 1953 cloned embryos were transferred to 12 surrogates. Six cloned offspring were born from five surrogates, a production efficiency of 0.3% (6/1953). These results demonstrate successful establishment of a miniature pig cloning technique by SCNT using NIBS miniature pigs as surrogates. To our knowledge, this is the first demonstration of successful production of GalT-KO miniature swine using miniature swine surrogates. This technique could help to ensure a stable supply of the cloned pigs through the use of miniature pig surrogates and could expand production in countries with limited space or in facilities with special regulations such as specific pathogen-free or good laboratory practice. © 2013 John Wiley & Sons A/S.

  8. Production of cloned NIBS (Nippon Institute for Biological Science) and α-1, 3-galactosyltransferase knockout MGH miniature pigs by somatic cell nuclear transfer using the NIBS breed as surrogates

    Science.gov (United States)

    Shimatsu, Yoshiki; Yamada, Kazuhiko; Horii, Wataru; Hirakata, Atsushi; Sakamoto, Yuji; Waki, Shiori; Sano, Junichi; Saitoh, Toshiki; Sahara, Hisashi; Shimizu, Akira; Yazawa, Hajime; Sachs, David H.; Nunoya, Tetsuo

    2013-01-01

    Background Nuclear transfer (NT) technologies offer a means for producing the genetically modified pigs necessary to develop swine models for mechanistic studies of disease processes as well as to serve as organ donors for xenotransplantation. Most previous studies have used commercial pigs as surrogates. Method and Results In this study, we established a cloning technique for miniature pigs by somatic cell nuclear transfer (SCNT) using Nippon Institute for Biological Science (NIBS) miniature pigs as surrogates. Moreover, utilizing this technique, we have successfully produced an α-1, 3-galactosyltransferase knockout (GalT-KO) miniature swine. Fibroblasts procured from a NIBS miniature pig fetus were injected into 1312 enucleated oocytes. The cloned embryos were transferred to 11 surrogates of which five successfully delivered 13 cloned offspring; the production efficiency was 1.0% (13/1312). In a second experiment, lung fibroblasts obtained from neonatal GalT-KO MGH miniature swine were used as donor cells and 1953 cloned embryos were transferred to 12 surrogates. Six cloned offspring were born from five surrogates, a production efficiency of 0.3% (6/1953). Conclusions These results demonstrate successful establishment of a miniature pig cloning technique by SCNT using NIBS miniature pigs as surrogates. To our knowledge, this is the first demonstration of successful production of GalT-KO miniature swine using miniature swine surrogates. This technique could help to ensure a stable supply of the cloned pigs through the use of miniature pig surrogates and could expand production in countries with limited space or in facilities with special regulations such as specific pathogen-free or good laboratory practice. PMID:23581451

  9. Highly efficient miniaturized coprecipitation screening (MiCoS) for amorphous solid dispersion formulation development.

    Science.gov (United States)

    Hu, Qingyan; Choi, Duk Soon; Chokshi, Hitesh; Shah, Navnit; Sandhu, Harpreet

    2013-06-25

    Microprecipitated bulk powder (MBP) is a novel solid dispersion technology to manufacture amorphous formulations of poorly soluble compounds that cannot be processed by spray drying or melt extrusion. An efficient high-throughput screening method has been developed to aid the selection of polymer type, drug loading and antisolvent to solvent ratio for MBP formulation development. With a 96-well platform, the miniaturized coprecipitation screening (MiCoS) includes mixing of drug and polymer in dimethylacetamide, controlled precipitation to generate MBP, filtration/washing, drying and high throughput characterization. The integrated MiCoS approach has been demonstrated with a model compound, glybenclamide. Based on the solid state stability and kinetic solubility of the MBP, hydroxypropylmethylcellulose acetate succinate polymer with 40% or lower drug loading, and antisolvent (0.01 N HCl) to solvent (dimethylacetamide) ratio of 5:1 or higher were selected to make glybenclamide MBP. MiCoS can be applied to both early and late stage formulation processing. In early stage research programs, the system can be used to enable efficacy, pharmacokinetics or mini-toxicology studies for poorly water soluble molecules using minimal amount of drug substance (2-10mg). In late stage development programs, MiCoS can be used to optimize MBP formulation by expanding the experimental design space to include additional formulation variants. Copyright © 2013 Elsevier B.V. All rights reserved.

  10. Modulation and efficiency characteristics of miniature microchip green laser sources based on PPMgOLN nonlinear material

    Science.gov (United States)

    Khaydarov, John; Essaian, Stepan; Shchegrov, Andrei; Slavov, Slav; Gabrielyan, Gevorg; Poghosyan, Armen; Soghomonyan, Suren

    2011-03-01

    We report on highly efficient diode-pumped solid-state (DPSS) green laser source based on a monolithic cavity microchip laser platform. The use of periodically poled MgO-doped Lithium Niobate (PPMgOLN) as the nonlinear frequency doubler together with gain material Nd3+:YVO4 allows obtaining a significant increase in the overall efficiency of green microchip laser in comparison with other compact green laser source architectures with comparable output power. We discuss our progress in miniaturization and efficient operation across a wide range of temperatures and application-specific modulation conditions. In particular, we demonstrate 50mW-120mW average green output power (30% duty cycle) with wall-plug efficiency over 13%. Efficient laser operation with duty cycle ranging from 10% to 60% in a wide range of repetition rates is also demonstrated. The laser is designed to be a part of the miniature and efficient RGB light source for microdisplay-based (LCOS, DLP or similar) mobile projector devices. While these projection architectures typically require modulation rates from 60Hz to about 2000Hz depending on design, we extended modulation speed up to 2MHz that can be of interest for other applications. A very efficient and small microchip as well as alignment-free design allow us to package this laser source into the very small volume of only 0.23cm3 (bounding box). We present results of performance tests for this packaged laser and demonstrate that such a miniature package can support laser operation with average power output of over 250mW.

  11. Improving efficiency in pig production

    African Journals Online (AJOL)

    Improving efficiency in pig production. The relative importance of different components of efficiency depends on whether one's interest is biological or economic. A study of the elements of biological efficiency shows that the choice of slaughter mass has a profound effect, and that in rela- tive terms reproductive ...

  12. Miniature Earthmover

    Science.gov (United States)

    1996-01-01

    International Machinery Corporation (IMC) developed a miniature earthmover, the 1/8 scale Caterpillar D11N Track-type Tractor, with trademark product approval and manufacturing/marketing license from Caterpillar, Inc. Through Marshall Space Flight Center assistance, the company has acquired infrared remote control technology, originally developed for space exploration. The technology is necessary for exports because of varying restrictions on radio frequency in foreign countries. The Cat D11N weighs only 340 pounds and has the world's first miniature industrial internal combustion engine. The earthmover's uses include mining, construction and demolition work, and hazardous environment work. IMC also has designs of various products for military use and other Caterpillar replicas.

  13. Improving efficiency in meat production

    OpenAIRE

    Brameld, John M; Parr, Tim

    2016-01-01

    Selective breeding and improved nutritional management over the past 20–30 years has resulted in dramatic improvements in growth efficiency for pigs and poultry, particularly lean tissue growth. However, this has been achieved using high-quality feed ingredients, such as wheat and soya that are also used for human consumption and more recently biofuels production. Ruminants on the other hand are less efficient, but are normally fed poorer quality ingredients that cannot be digested by human s...

  14. Improving efficiency in meat production.

    Science.gov (United States)

    Brameld, John M; Parr, Tim

    2016-08-01

    Selective breeding and improved nutritional management over the past 20-30 years has resulted in dramatic improvements in growth efficiency for pigs and poultry, particularly lean tissue growth. However, this has been achieved using high-quality feed ingredients, such as wheat and soya that are also used for human consumption and more recently biofuels production. Ruminants on the other hand are less efficient, but are normally fed poorer quality ingredients that cannot be digested by human subjects, such as grass or silage. The challenges therefore are to: (i) maintain the current efficiency of growth of pigs and poultry, but using more ingredients not needed to feed the increasing human population or for the production of biofuels; (ii) improve the efficiency of growth in ruminants; (iii) at the same time produce animal products (meat, milk and eggs) of equal or improved quality. This review will describe the use of: (a) enzyme additives for animal feeds, to improve feed digestibility; (b) known growth promoting agents, such as growth hormone, β-agonists and anabolic steroids, currently banned in the European Union but used in other parts of the world; (c) recent transcriptomic studies into molecular mechanisms for improved growth efficiency via low residual feed intake. In doing so, the use of genetic manipulation in animals will also be discussed.

  15. Energy efficiency in products and production

    Energy Technology Data Exchange (ETDEWEB)

    Tugrul, Kodaz [Arcelik (Turkey)], email: tugrul.kodaz@arcelik.com

    2011-07-01

    Energy efficiency is not simply about making energy savings, it is also about maintaining the quality of living conditions, service quality and volumes of production in industrial plants. Using energy effectively wherever and whenever possible in our everyday lives will most likely make a great positive contribution to our household budget, to the national economy and to the protection of the environment. Fossil fuels, like petroleum and coal, the most important energy sources, are being depleted. What is worse, greenhouse gas emissions, which cause global warming and climate change, are rising. So there is an urgent need to raise energy efficiency and prevent energy wastage. Economic development will be based on sustainable usage of natural resources. Therefore, a combined commitment to protecting the environment and preserving and ecological balance at every stage of production activities is the central guarantee natural resource sustainability. This paper provides information on various studies of how to achieve high energy efficiency with respect both to products and their production.

  16. Liquid Marbles Stabilized by Fluorine-Bearing Cyclomatrix Polyphosphazene Particles and Their Application as High-Efficiency Miniature Reactors.

    Science.gov (United States)

    Wei, Wei; Lu, Rongjie; Ye, Weitao; Sun, Jianhua; Zhu, Ye; Luo, Jing; Liu, Xiaoya

    2016-02-23

    Increasing attention has been paid to fabricate multifunctional stabilizers of liquid marbles for expanding their application. Here, a kind of hydrophobic cyclomatrix polyphosphazene particles (PZAF) were facilely prepared using a one-step precipitation polycondensation of hexachlorocyclotriphosphazene and 4,4'-(hexafluoroisopropylidene)diphenol, and their ability to stabilize liquid marbles was first investigated. The Ag nanoparticle-decorated PZAF particles (Ag/PZAF) were then fabricated by an in situ reduction of silver nitrate onto PZAF particles and used to construct catalytic liquid marbles. The results revealed that the reduction of methylene blue (MB) in aqueous solution by sodium borohydride could be highly efficiently catalyzed in the catalytic liquid marbles, even with a large volume. An excellent cycle use performance of the catalytic liquid marbles without losing catalytic efficiency was also present. The high catalytic activity is mainly attributed to the uniform immobilization of Ag nanoparticles onto PZAF particles and the adsorption behavior of PZAF particles toward MB, which may play an effect on allowing high catalytic surface area and effective accelerating the mass transfer of MB to the Ag catalytic active sites, respectively. Therefore, the combination of Ag nanoparticles with PZAF particles has been demonstrated clearly to be a facile and effective strategy to obtain the functional stabilizer for preparing the catalytic liquid marbles as promising miniature reactors used in heterogeneous catalytic reactions.

  17. Zipf's Law of Abbreviation and the Principle of Least Effort: Language users optimise a miniature lexicon for efficient communication.

    Science.gov (United States)

    Kanwal, Jasmeen; Smith, Kenny; Culbertson, Jennifer; Kirby, Simon

    2017-08-01

    The linguist George Kingsley Zipf made a now classic observation about the relationship between a word's length and its frequency; the more frequent a word is, the shorter it tends to be. He claimed that this "Law of Abbreviation" is a universal structural property of language. The Law of Abbreviation has since been documented in a wide range of human languages, and extended to animal communication systems and even computer programming languages. Zipf hypothesised that this universal design feature arises as a result of individuals optimising form-meaning mappings under competing pressures to communicate accurately but also efficiently-his famous Principle of Least Effort. In this study, we use a miniature artificial language learning paradigm to provide direct experimental evidence for this explanatory hypothesis. We show that language users optimise form-meaning mappings only when pressures for accuracy and efficiency both operate during a communicative task, supporting Zipf's conjecture that the Principle of Least Effort can explain this universal feature of word length distributions. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. The Whole new world of miniature technology

    Energy Technology Data Exchange (ETDEWEB)

    Gillespie, L.K.

    1980-07-01

    In the past ten years, miniaturization of both electrical and mechanical parts has significantly increased. Documentation of the design and production capabilities of miniaturization in the electronics industry is well-defined. Literature on the subject of miniaturization of metal piece parts, however, is hard to find. Some of the current capabilities in the manufacture of miniature metal piece parts or miniature features in larger piece parts are discussed.

  19. Efficiency of the biodiesel production from microalgae

    Science.gov (United States)

    Chernova, N. I.; Kiseleva, S. V.; Popel', O. S.

    2014-06-01

    Biomass of the highly productive algae is a promising nontraditional raw material for biopower engineering, including production of energy and motor fuels from it. The paper presents an analysis of the efficiency of solar energy conversion to microalgae biofuel based both on the general theoretical approaches and on the experimental results obtained in various pilot projects. Some data on the economic efficiency of biofuel production from algae are also discussed. The possible ways to enhance the efficiency of microalgae energy use are formulated.

  20. The Efficiency of Educational Production

    DEFF Research Database (Denmark)

    Bogetoft, Peter; Heinesen, Eskil; Tranæs, Torben

    2015-01-01

    Focusing in particular on upper secondary education, this paper examines whether the relatively high level of expenditure on education in the Nordic countries is matched by high output from the educational sector, both in terms of student enrolment and indicators of output quality in the form...... in order to analyse different aspects of efficiency. In purely quantitative models (where inputs and outputs are expenditure and number of students at different levels of the educational system) and in models where graduation or completion rates are included as indicators of output quality, Finland...... is the most efficient Nordic country (often fully efficient), whereas Sweden and especially Norway and Denmark are clearly inefficient. However, using PISA test scores as indicators of student input quality in upper secondary education reduces the inefficiencies of these three countries. Also, when expected...

  1. The Efficiency of Educational Production

    DEFF Research Database (Denmark)

    Bogetoft, Peter; Heinesen, Eskil; Tranæs, Torben

    Focusing in particular on upper secondary education, this paper examines whether the relatively high level of expenditure on education in the Nordic countries is matched by high output from the educational sector, both in terms of student enrolment and indicators of output quality in the form...... in order to analyse different aspects of efficiency. In purely quantitative models (where inputs and outputs are expenditure and number of students at different levels of the educational system) and in models where graduation or completion rates are included as an indicator of output quality, Finland...... is the most efficient Nordic country (often fully efficient), whereas Sweden and especially Norway and Denmark are clearly inefficient. However, using PISA test scores as indicators of student input quality in upper secondary education reduces the inefficiencies of these three countries. Also, when expected...

  2. Improving efficiency in pig production

    African Journals Online (AJOL)

    My approach has been to consider efficiency in terms com- parable to those used by the working party of the Agricul- tural Research Council (ARC, 1981)of which I was a mem- ber. The factors considered are the costs of tissue synthesis for both protein and lipid, the maintenance cost, the parti- tion between protein and fat, ...

  3. Eco-efficiency in industrial production

    NARCIS (Netherlands)

    von Raesfeld Meijer, Ariane M.; de Bakker, F.G.A.; Groen, Arend J.

    2001-01-01

    English AbstractThis report of the MATRIC project investigated 'Eco-efficiency in industrial production'. After a general introduction into the domain of eco-efficiency, the first part of this report further focusses on the organisation of Product-Oriented Environmental Management (POEM), which is

  4. Methionine supplementation in the productive efficiency, carcass ...

    African Journals Online (AJOL)

    Methionine supplementation in the productive efficiency, carcass characteristics and economics of growing indigenous turkey. ... indicate that supplementing growing turkey feed- containing 18%CP and 2800 Keal/kg ME with 0.05% methionine enhances productive performances, good carcass yield and production cost.

  5. Productivity benefits of industrial energy efficiency measures

    Energy Technology Data Exchange (ETDEWEB)

    Worrell, Ernst; Laitner, John A.; Michael, Ruth; Finman, Hodayah

    2004-08-30

    We review the relationship between energy efficiency improvement measures and productivity in industry. We review over 70 industrial case studies from widely available published databases, followed by an analysis of the representation of productivity benefits in energy modeling. We propose a method to include productivity benefits in the economic assessment of the potential for energy efficiency improvement. The case-study review suggests that energy efficiency investments can provide a significant boost to overall productivity within industry. If this relationship holds, the description of energy-efficient technologies as opportunities for larger productivity improvements has significant implications for conventional economic assessments. The paper explores the implications this change in perspective on the evaluation of energy-efficient technologies for a study of the iron and steel industry in the US. This examination shows that including productivity benefits explicitly in the modeling parameters would double the cost-effective potential for energy efficiency improvement, compared to an analysis excluding those benefits. We provide suggestions for future research in this important area.

  6. Efficient generation of GGTA1-null Diannan miniature pigs using TALENs combined with somatic cell nuclear transfer

    Directory of Open Access Journals (Sweden)

    Wenmin Cheng

    2016-11-01

    Full Text Available Abstract Background α1,3-Galactosyltransferase (GGTA1 is essential for the biosynthesis of glycoproteins and therefore a simple and effective target for disrupting the expression of galactose α-1,3-galactose epitopes, which mediate hyperacute rejection (HAR in xenotransplantation. Miniature pigs are considered to have the greatest potential as xenotransplantation donors. A GGTA1-knockout (GTKO miniature pig might mitigate or prevent HAR in xenotransplantation. Methods Transcription activator-like effector nucleases (TALENs were designed to target exon 6 of porcine GGTA1 gene. The targeting activity was evaluated using a luciferase SSA recombination assay. Biallelic GTKO cell lines were established from single-cell colonies of fetal fibroblasts derived from Diannan miniature pigs following transfection by electroporation with TALEN plasmids. One cell line was selected as donor cell line for somatic cell nuclear transfer (SCNT for the generation of GTKO pigs. GTKO aborted fetuses, stillborn fetuses and live piglets were obtained. Genotyping of the collected cloned individuals was performed. The Gal expression in the fibroblasts and one piglet was analyzed by fluorescence activated cell sorting (FACS, confocal microscopy, immunohistochemical (IHC staining and western blotting. Results The luciferase SSA recombination assay revealed that the targeting activities of the designed TALENs were 17.1-fold higher than those of the control. Three cell lines (3/126 showed GGTA1 biallelic knockout after modification by the TALENs. The GGTA1 biallelic modified C99# cell line enabled high-quality SCNT, as evidenced by the 22.3 % (458/2068 blastocyst developmental rate of the reconstructed embryos. The reconstructed GTKO embryos were subsequently transferred into 18 recipient gilts, of which 12 became pregnant, and six miscarried. Eight aborted fetuses were collected from the gilts that miscarried. One live fetus was obtained from one surrogate by caesarean

  7. Efficient generation of P53 biallelic knockout Diannan miniature pigs via TALENs and somatic cell nuclear transfer

    Directory of Open Access Journals (Sweden)

    Youfeng Shen

    2017-11-01

    Full Text Available Abstract Background Pigs have many features that make them attractive as biomedical models for various diseases, including cancer. P53 is an important tumor suppressor gene that exerts a central role in protecting cells from oncogenic transformation and is mutated in a large number of human cancers. P53 mutations occur in almost every type of tumor and in over 50% of all tumors. In a recent publication, pigs with a mutated P53 gene were generated that resulted in lymphoma and renal and osteogenic tumors. However, approximately 80% of human tumors have dysfunctional P53. A P53-deficient pig model is still required to elucidate. Methods Transcription activator-like effector nucleases (TALENs were designed to target porcine P53 exon 4. The targeting activity was evaluated using a luciferase SSA recombination assay. P53 biallelic knockout (KO cell lines were established from single-cell colonies of fetal fibroblasts derived from Diannan miniature pigs followed by electroporation with TALENs plasmids. One cell line was selected as the donor cell line for somatic cell nuclear transfer (SCNT for the generation of P53 KO pigs. P53 KO stillborn fetuses and living piglets were obtained. Gene typing of the collected cloned individuals was performed by T7EI assay and sequencing. Fibroblast cells from Diannan miniature piglets with a P53 biallelic knockout or wild type were analyzed for the P53 response to doxorubicin treatment by confocal microscopy and western blotting. Results The luciferase SSA recombination assay revealed that the targeting activities of the designed TALENs were 55.35-fold higher than those of the control. Eight cell lines (8/19 were mutated for P53, and five of them were biallelic knockouts. One of the biallelic knockout cell lines was selected as nuclear donor cells for SCNT. The cloned embryos were transferred into five recipient gilts, three of them becoming pregnant. Five live fetuses were obtained from one surrogate by caesarean

  8. Efficient generation of P53 biallelic knockout Diannan miniature pigs via TALENs and somatic cell nuclear transfer.

    Science.gov (United States)

    Shen, Youfeng; Xu, Kaixiang; Yuan, Zaimei; Guo, Jianxiong; Zhao, Heng; Zhang, Xuezeng; Zhao, Lu; Qing, Yubo; Li, Honghui; Pan, Weirong; Jia, Baoyu; Zhao, Hong-Ye; Wei, Hong-Jiang

    2017-11-03

    Pigs have many features that make them attractive as biomedical models for various diseases, including cancer. P53 is an important tumor suppressor gene that exerts a central role in protecting cells from oncogenic transformation and is mutated in a large number of human cancers. P53 mutations occur in almost every type of tumor and in over 50% of all tumors. In a recent publication, pigs with a mutated P53 gene were generated that resulted in lymphoma and renal and osteogenic tumors. However, approximately 80% of human tumors have dysfunctional P53. A P53-deficient pig model is still required to elucidate. Transcription activator-like effector nucleases (TALENs) were designed to target porcine P53 exon 4. The targeting activity was evaluated using a luciferase SSA recombination assay. P53 biallelic knockout (KO) cell lines were established from single-cell colonies of fetal fibroblasts derived from Diannan miniature pigs followed by electroporation with TALENs plasmids. One cell line was selected as the donor cell line for somatic cell nuclear transfer (SCNT) for the generation of P53 KO pigs. P53 KO stillborn fetuses and living piglets were obtained. Gene typing of the collected cloned individuals was performed by T7EI assay and sequencing. Fibroblast cells from Diannan miniature piglets with a P53 biallelic knockout or wild type were analyzed for the P53 response to doxorubicin treatment by confocal microscopy and western blotting. The luciferase SSA recombination assay revealed that the targeting activities of the designed TALENs were 55.35-fold higher than those of the control. Eight cell lines (8/19) were mutated for P53, and five of them were biallelic knockouts. One of the biallelic knockout cell lines was selected as nuclear donor cells for SCNT. The cloned embryos were transferred into five recipient gilts, three of them becoming pregnant. Five live fetuses were obtained from one surrogate by caesarean section after 38 days of gestation for genotyping

  9. SCALE EFFICIENCY IN EUROPEAN PORK PRODUCTION

    Directory of Open Access Journals (Sweden)

    Lukas CECHURA

    2015-11-01

    Full Text Available The paper analyses scale efficiency in European pork production. The analysis shows significant differences in the exploitation of economies of scale among EU member states. In particular, old member states exhibit increasing returns to scale whereas most new member states show either constant or decreasing returns to scale. The differences among old and new member states are also pronounced from a dynamic perspective: whereas the old member states improved their productivity in pork production through scale efficiency, its impact in new member states was rather negative.

  10. Production and efficiency analysis with R

    CERN Document Server

    Behr, Andreas

    2015-01-01

    This textbook introduces essential topics and techniques in production and efficiency analysis and shows how to apply these methods using the statistical software R. Numerous small simulations lead to a deeper understanding of random processes assumed in the models and of the behavior of estimation techniques. Step-by-step programming provides an understanding of advanced approaches such as stochastic frontier analysis and stochastic data envelopment analysis. The text is intended for master students interested in empirical production and efficiency analysis. Readers are assumed to have a general background in production economics and econometrics, typically taught in introductory microeconomics and econometrics courses.

  11. PRODUCT EFFICIENCY IN THE SPANISH AUTOMOBILE MARKET

    Directory of Open Access Journals (Sweden)

    González, Eduardo

    2013-01-01

    Full Text Available This paper evaluates product efficiency in the Spanish automobile market. We use non parametric frontier techniques in order to estimate product efficiency scores for each model. These scores reflect the minimum price for which each car could be sold, given the bundle of tangible features it offers in comparison to the best-buy models. Unlike previous research, we use discounted prices which have been adjusted by car dealerships to meet sale targets. Therefore, we interpret the efficiency scores as indicators of the value of the intangible features of the brand. The results show that Audi, Volvo, Volkswagen and Mercedes offer the greatest intangible value, since they are heavily overpriced in terms of price/product ratios. Conversely, Seat, Kia, Renault and Dacia are the brands that can be taken as referent in terms of price/product ratios.

  12. Capillary-Driven Microfluidic Chips for Miniaturized Immunoassays: Efficient Fabrication and Sealing of Chips Using a "Chip-Olate" Process.

    Science.gov (United States)

    Temiz, Yuksel; Delamarche, Emmanuel

    2017-01-01

    The fabrication of silicon-based microfluidic chips is invaluable in supporting the development of many microfluidic concepts for research in the life sciences and in vitro diagnostic applications such as the realization of miniaturized immunoassays using capillary-driven chips. While being extremely abundant, the literature covering microfluidic chip fabrication and assay development might not have addressed properly the challenge of fabricating microfluidic chips on a wafer level or the need for dicing wafers to release chips that need then to be further processed, cleaned, rinsed, and dried one by one. Here, we describe the "chip-olate" process wherein microfluidic structures are formed on a silicon wafer, followed by partial dicing, cleaning, and drying steps. Then, integration of reagents (if any) can be done, followed by lamination of a sealing cover. Breaking by hand the partially diced wafer yields individual chips ready for use.

  13. Malmquist Productivity Index on Efficiency Layers

    Directory of Open Access Journals (Sweden)

    F. Rezai balf ∗

    2012-09-01

    Full Text Available Data Envelopment Analysis (DEA, a popular linear programming technique is useful to rate comparatively operational effiency of decision Making Unit (DMU based on the their deterministic inputoutput data. The Malmquist productivity index in DEA, calculable with the distance function, for measurement the productivity change among two variant time period or two variant group in the same time. This index is based on two factor of efficiency change index and a technological change index. In this paper, we operate on the collective Malmquist productivity index, which performs clustering operation DMUs with classification into different levels of efficient frontier, and then we discuss on the relation between Malmquist index on the efficiency layers and their attractiveness and progress

  14. Efficiency and productivity of hospitals in Vietnam.

    Science.gov (United States)

    Pham, Thuy Linh

    2011-01-01

    The purpose of this paper is to examine the relative efficiency and productivity of hospitals during the health reform process. Data envelopment analyses method (DEA) with the input-oriented variable-returns-to-scale model was used to calculate efficiency scores. Malmquist total factor productivity index approach was then employed to calculate productivity of hospitals. Data of 101 hospitals was extracted from databases of the Ministry of Health, Vietnam from the years 1998 to 2006. There was evidence of improvement in overall technical efficiency from 65 per cent in 1998 to 76 per cent in 2006. Hospitals' productivity progressed around 1.4 per cent per year, which was mainly due to the technical efficiency improvement. Furthermore, provincial hospitals were more technically efficient than their central counterparts and hospitals located in different regions performed differently. The paper provides an insight in the performance of Vietnamese public hospitals that has been rarely examined before and contributes to the existing literature of hospital performance in developing countries

  15. Enhanced growth and recombinant protein production of Escherichia coli by a perfluorinated oxygen carrier in miniaturized fed-batch cultures

    Directory of Open Access Journals (Sweden)

    Neubauer Peter

    2011-06-01

    Full Text Available Abstract Background Liquid perfluorochemicals (PFCs are interesting oxygen carriers in medicine and biotechnology with a high solubility for oxygen. They have been repeatedly used for improving oxygen transfer into prokaryotic and eukaryotic cell cultures, however their application is still limited. Here we show the great benefit of air/oxygen saturated perfluorodecalin (PFD for high cell density cultivation of Escherichia coli in microwell plates and their positive effect on the soluble production of a correctly folded heterologously expressed alcohol dehydrogenase. Results In EnBase® cultivations the best effect was seen with PFD saturated with oxygen enriched air (appr. 10 μM oxygen per ml when PFD was added at the time of induction. In contrast the effect of PFD was negligible when it was added already at the time of inoculation. Optimisation of addition time and content of loaded oxygen into the PFD resulted in an increased the cell density by 40% compared to control cultures, and correspondingly also the product yield increased, demonstrated at the example of a recombinant alcohol dehydrogenase. Conclusions PFCs are a valuable additive in miniaturized cell culture formats. For production of recombinant proteins in low cell density shaken cultures the addition of oxygen-enriched PFD makes the process more robust, i.e. a high product yield is not any more limited to a very narrow cell density window during which the induction has to be done. The positive effect of PFD was even more obvious when it was added during high cell density cultures. The effect of the PFD phase depends on the amount of oxygen which is loaded into the PFD and which thus is a matter of optimisation.

  16. Efficiency and productivity in pig nutrition

    OpenAIRE

    Mosenthin, Rainer

    2011-01-01

    The efficient use of feed ingredients in diets for pigs is an important determinant of the productivity in modern pig production systems. Thus, there is a need to accurately estimate the feeding value of various feed ingredients. Several factors have to be considered for the adequate nutritional evaluation of feedstuffs. These include information (i) on the content of energy yielding nutrients (e.g. starch, sugars, lipids, protein), (ii) the digestibility and post absorptive utilization of nu...

  17. Productivity and production efficiency among small scale irrigated ...

    African Journals Online (AJOL)

    The study examined productivity and production efficiency among small scale irrigated sugarcane farmers in Niger State, Nigeria using a stochastic translog frontier function. Data for the study were obtained using structured questionnaires administered to 100 randomly selected sugarcane farmers from Paiko and Gurara ...

  18. Labour productivity and resource use efficiency amongst ...

    African Journals Online (AJOL)

    The study examined labour productivity and resource efficiency amongst smallholder cocoa farmers in Abia State, Nigeria. A purposive random sampling technique was adopted in selecting 60 cocoa farmers from three agricultural zones in the State. The analytical techniques used involve inferential statistics like means, ...

  19. RESOURCE USE EFFICIENCY OF GROUNDNUT PRODUCTION IN ...

    African Journals Online (AJOL)

    AGROSEARCH UIL

    2012-09-28

    Sep 28, 2012 ... ABSTRACT. The study was conducted to measure the resource use efficiency in groundnut production in. Ringim Local Government Area, Jigawa State. A stratified sampling technique was employed to select 58 respondents. The tool for collection of primary data was structured questionnaires. The.

  20. Production Efficiency Audit on Tea Beverage Agroindustry

    Directory of Open Access Journals (Sweden)

    Hendra Adiyatna, . Marimin

    2001-04-01

    Full Text Available The objective of this work was to investigate and to apply economic efficiency performance measurement methods for tea beverage agroindustry. These measurements were based on twelve technique and economic efficiency criteria, which illustrate the condition of the processes. This illustration was able to explain the material and the energy utilization, variance of the processes and product, handling of the waste and acceptance in the market. The methodology was divided into three steps: (1 defining the technique and the economic criteria, appropriate to the circumstance of the processes, (2 state efficiency the level status, (3 evaluation and structure prioritizing of the processes improvement alternatives. The results of this work indicates that there are seven appropriate criteria. The status of the efficiency is in the medium level. The improvement priorities recommended include optimization of material and energy usage and minimization of breaktime of the critical processes

  1. High-efficiency cross-beam magnetic electron-impact source for improved miniature Mattauch-Herzog mass spectrometer performance

    Science.gov (United States)

    Hadjar, O.; Fowler, W. K.

    2012-06-01

    We describe a newly designed cross-beam magnetic electron-impact ion source (CBM-EI). We demonstrate its superiority in comparison with a conventional source (CB-EI) when used with a commercial miniature sector-field-type, non-scanning mass spectrometer featuring Mattauch-Herzog geometry (MH-MS) and a permanent sector-field magnet. This paper clearly shows the value of the CBM-EI for enhancing MH-MS sensitivity. Unlike secondary electron-multiplier type detectors, the pixelated detector (IonCCD™) used in the commercial MH-MS has no gain. The MH-MS/IonCCD system is therefore challenged to compete with time-of-flight and quadrupole MS systems due to their higher ion transmissions and detector gains. Using the new CBM-EI, we demonstrate an instrument sensitivity increase of 20-fold to 100-fold relative to the CB-EI-equipped instrument. This remarkable signal increase by the simple addition of the magnet assembly arises from the magnet-induced gyromotion of the thermionic electrons, which vastly increases the effective path length of the electrons through the ionization region, and the collimated nature of the electron flux, which optimizes the ion transmission through the 100-μm object slit of the MH-MS. Some or all of the realized sensitivity increase may be exchanged for an increase in resolution and/or mass range through the use of a narrower object slit, or for a reduction in ion-source pressure to limit quenching. The CBM-EI should facilitate development of a differentially pumped ion source to extend the lifetime of the filament, especially in otherwise intractable applications associated with oxidizing and corrosive samples.

  2. Miniature pigs.

    Science.gov (United States)

    Van Metre, D C; Angelos, S M

    1999-09-01

    Miniature pigs have become popular pets in North America, and veterinarians of a variety of clinical specialties may be called on for their care. Successful collection of blood from these animals requires familiarity with the location of sites for venipuncture and knowledge of adequate methods of restraint. In this article, restraint and techniques for venipuncture are described, as well as techniques for cerebrospinal fluid collection, semen collection, and vaginal cytologic examination. Interpretation of hematologic, serum biochemical, and urinalysis data are also discussed. Methods for diagnosis of skin diseases, gastrointestinal parasitism, and enteric infectious diseases are included in order to provide the practitioner with the essential knowledge and skills for a variety of clinical pathologic studies of this unique pet.

  3. ECONOMIC EFFICIENCY IN TOMATOES PRODUCTION IN GREENHOUSES

    Directory of Open Access Journals (Sweden)

    A POPESCU

    2003-07-01

    Full Text Available This study aimed to appreciate the evolution of economic efficiency in tomatoes production in greenhouses within a private firm situated next to the capital. The firm owns 4 ha greenhouses and the weight of tomatoes crop in the cultivated area is just 38.75 %. In fact, during the last three years, the tomatoes cultivated surface has been diminished in favour of flowers production which, like tomatoes production is an important income source for any producer. The reduction of the tomatoes cultivated area was compensated by the increase of intensification grade using new high performance hybrids and modern technologies. Thus, the scientific production management has been looking for maintaining the total production at the same level from a year to another by an increased average tomatoes yield by 53.33 % . The continuous increase of farm input price has doubled the cost per surface unit and increased the cost per tomatoes kilogram by 33 %. The increase of tomatoes demand and of market price by 31 % have had a positive influence on the farm incomes which has doubled during the last three years. In the year 2000, the company has obtained USD 41,818 income/ha of which subtracting the related production cost we can easily get USD 4,815 profit/ha. The average profit rate recorded by the firm is 13 % in the period 2000-2002, when the study was made. As a conclusion, tomatoes production in greenhouses is a good deal. To keep a high economic efficiency, under the diminishing of the cultivated area, the producers have to increase average tomatoes production by using high performance technology based on high economic value hybrids.

  4. Generic construction of efficient matrix product operators

    Science.gov (United States)

    Hubig, C.; McCulloch, I. P.; Schollwöck, U.

    2017-01-01

    Matrix product operators (MPOs) are at the heart of the second-generation density matrix renormalization group (DMRG) algorithm formulated in matrix product state language. We first summarize the widely known facts on MPO arithmetic and representations of single-site operators. Second, we introduce three compression methods (rescaled SVD, deparallelization, and delinearization) for MPOs and show that it is possible to construct efficient representations of arbitrary operators using MPO arithmetic and compression. As examples, we construct powers of a short-ranged spin-chain Hamiltonian, a complicated Hamiltonian of a two-dimensional system and, as proof of principle, the long-range four-body Hamiltonian from quantum chemistry.

  5. Miniaturization in Biocatalysis

    Directory of Open Access Journals (Sweden)

    Pedro Fernandes

    2010-03-01

    Full Text Available The use of biocatalysts for the production of both consumer goods and building blocks for chemical synthesis is consistently gaining relevance. A significant contribution for recent advances towards further implementation of enzymes and whole cells is related to the developments in miniature reactor technology and insights into flow behavior. Due to the high level of parallelization and reduced requirements of chemicals, intensive screening of biocatalysts and process variables has become more feasible and reproducibility of the bioconversion processes has been substantially improved. The present work aims to provide an overview of the applications of miniaturized reactors in bioconversion processes, considering multi-well plates and microfluidic devices, update information on the engineering characterization of the hardware used, and present perspective developments in this area of research.

  6. Promoted Ru on high-surface area graphite for efficient miniaturized production of hydrogen from ammonia

    DEFF Research Database (Denmark)

    Sørensen, Rasmus Zink; Klerke, Asbjørn; Quaade, Ulrich

    2006-01-01

    Promoted Ru/C catalysts for decomposition of ammonia are incorporated into micro-fabricated reactors for the first time. With the reported preparation technique, the performance is increased more than two orders of magnitude compared to previously known micro-fabricated reactors for ammonia...

  7. A microelectromechanical systems-enabled, miniature triple quadrupole mass spectrometer.

    Science.gov (United States)

    Wright, Steven; Malcolm, Andrew; Wright, Christopher; O'Prey, Shane; Crichton, Edward; Dash, Neil; Moseley, Richard W; Zaczek, Wojciech; Edwards, Peter; Fussell, Richard J; Syms, Richard R A

    2015-03-17

    Miniaturized mass spectrometers are becoming increasingly capable, enabling the development of many novel field and laboratory applications. However, to date, triple quadrupole tandem mass spectrometers, the workhorses of quantitative analysis, have not been significantly reduced in size. Here, the basis of a field-deployable triple quadrupole is described. The key development is a highly miniaturized ion optical assembly in which a sequence of six microengineered components is employed to generate ions at atmospheric pressure, provide a vacuum interface, effect ion guiding, and perform fragmentation and mass analysis. Despite its small dimensions, the collision cell efficiently fragments precursor ions and yields product ion spectra that are very similar to those recorded using conventional instruments. The miniature triple quadrupole has been used to detect thiabendazole, a common pesticide, in apples at a level of 10 ng/g.

  8. The miniature accelerator

    CERN Multimedia

    Antonella Del Rosso

    2015-01-01

    The image that most people have of CERN is of its enormous accelerators and their capacity to accelerate particles to extremely high energies. But thanks to some cutting-edge studies on beam dynamics and radiofrequency technology, along with innovative construction techniques, teams at CERN have now created the first module of a brand-new accelerator, which will be just 2 metres long. The potential uses of this miniature accelerator will include deployment in hospitals for the production of medical isotopes and the treatment of cancer. It’s a real David-and-Goliath story.   Serge Mathot, in charge of the construction of the "mini-RFQ", pictured with the first of the four modules that will make up the miniature accelerator. The miniature accelerator consists of a radiofrequency quadrupole (RFQ), a component found at the start of all proton accelerator chains around the world, from the smallest to the largest. The LHC is designed to produce very high-intensity beams ...

  9. Efficiency in energy production and consumption

    Science.gov (United States)

    Kellogg, Ryan Mayer

    This dissertation deals with economic efficiency in the energy industry and consists of three parts. The first examines how joint experience between pairs of firms working together in oil and gas drilling improves productivity. Part two asks whether oil producers time their drilling optimally by taking real options effects into consideration. Finally, I investigate the efficiency with which energy is consumed, asking whether extending Daylight Saving Time (DST) reduces electricity use. The chapter "Learning by Drilling: Inter-Firm Learning and Relationship Persistence in the Texas Oilpatch" examines how oil production companies and the drilling rigs they hire improve drilling productivity by learning through joint experience. I find that the joint productivity of a lead firm and its drilling contractor is enhanced significantly as they accumulate experience working together. Moreover, this result is robust to other relationship specificities and standard firm-specific learning-by-doing effects. The second chapter, "Drill Now or Drill Later: The Effect of Expected Volatility on Investment," investigates the extent to which firms' drilling behavior accords with a key prescription of real options theory: irreversible investments such as drilling should be deferred when the expected volatility of the investments' payoffs increases. I combine detailed data on oil drilling with expectations of future oil price volatility that I derive from the NYMEX futures options market. Conditioning on expected price levels, I find that oil production companies significantly reduce the number of wells they drill when expected price volatility is high. I conclude with "Daylight Time and Energy: Evidence from an Australian Experiment," co-authored with Hendrik Wolff. This chapter assesses DST's impact on electricity demand using a quasi-experiment in which parts of Australia extended DST in 2000 to facilitate the Sydney Olympics. We show that the extension did not reduce overall

  10. PRODUCTION CAPABILITIES EFFICIENCY PREFABRICATION ERECTION OF BUILDINGS

    Directory of Open Access Journals (Sweden)

    SOKOLOV I. A.

    2015-12-01

    Full Text Available Formulation of the problem. the largest reserves of increase of efficiency of building production concluded in the decision of problems of ensuring compliance with the technological properties of space-planning and constructive decisions of buildings organizational and technological conditions of manufacturing processes. Tendencies of development of the society determined the growth in construction, complexity of design rhenium building and makes it necessary to reduce the time of construction of buildings and reduce the cost of construction and installation works. In recent years, the architectural and compositional solutions constructed buildings are increasingly conflict with organizational, technological and technical capacity building organizations. This problem is solved by the improvement and development of new technologies of building production, the use of more modern construction machines and mechanisms. The implementation of the tasks can be solved by creating a space-planning and constructive decisions of buildings corresponding possibilities of building organizations and the creation of fundamentally new technologies. Currently, there is no single comprehensive approach allows to establish the extent to which space-constructive decisions of buildings technological possibilities of building production. Imbalance intentions and capabilities results in a significant increase in financial expenses for the construction of the building. The purpose of the article. It is necessary to propose a method of assessing the level of technological prefabrication construction of buildings, the application of which will provide an opportunity to improve the full process of erection of the building and, as a consequence, increase its efficiency by increasing the extent to which the technological properties of space-planning and constructive decisions of buildings organizational and technological conditions of manufacturing processes, pogruzki

  11. Anti-reflective nanoporous silicon for efficient hydrogen production

    Science.gov (United States)

    Oh, Jihun; Branz, Howard M

    2014-05-20

    Exemplary embodiments are disclosed of anti-reflective nanoporous silicon for efficient hydrogen production by photoelectrolysis of water. A nanoporous black Si is disclosed as an efficient photocathode for H.sub.2 production from water splitting half-reaction.

  12. Catalysts for Efficient Production of Carbon Nanotubes

    Science.gov (United States)

    Sun, Ted X.; Dong, Yi

    2009-01-01

    Several metal alloys have shown promise as improved catalysts for catalytic thermal decomposition of hydrocarbon gases to produce carbon nanotubes (CNTs). Heretofore almost every experiment on the production of carbon nanotubes by this method has involved the use of iron, nickel, or cobalt as the catalyst. However, the catalytic-conversion efficiencies of these metals have been observed to be limited. The identification of better catalysts is part of a continuing program to develop means of mass production of high-quality carbon nanotubes at costs lower than those achieved thus far (as much as $100/g for purified multi-wall CNTs or $1,000/g for single-wall CNTs in year 2002). The main effort thus far in this program has been the design and implementation of a process tailored specifically for high-throughput screening of alloys for catalyzing the growth of CNTs. The process includes an integral combination of (1) formulation of libraries of catalysts, (2) synthesis of CNTs from decomposition of ethylene on powders of the alloys in a pyrolytic chemical-vapor-decomposition reactor, and (3) scanning- electron-microscope screening of the CNTs thus synthesized to evaluate the catalytic efficiencies of the alloys. Information gained in this process is put into a database and analyzed to identify promising alloy compositions, which are to be subjected to further evaluation in a subsequent round of testing. Some of these alloys have been found to catalyze the formation of carbon nano tubes from ethylene at temperatures as low as 350 to 400 C. In contrast, the temperatures typically required for prior catalysts range from 550 to 750 C.

  13. Business strategies, profitability and efficiency of production

    Directory of Open Access Journals (Sweden)

    S. Alarcón

    2013-02-01

    Full Text Available The strategy choices of market-oriented companies are a topic now under wide investigation in the analysis of business performance antecedents. The purpose of this study is to examine the outcomes of the combination of three different organizational strategies (market orientation, innovativeness and entrepreneurial orientation on business performance indicators. Models using profitability and efficiency indicators are proposed with the specific aim of obtaining a deeper analysis of the relative roles played by each. The empirical work takes place in the agro-food industry in the Ebro Valley, one of Spain’s most competitive regions. The estimates from profitability quantile and truncated regressions of the efficiency scores reveal that market orientation has a positive effect on economic and productivity performance. The impact of pro-active, innovation-seeking, and risk-averse entrepreneurship is nevertheless more debatable, despite some influence of these entrepreneurial styles on observed performance values. This enables conclusions regarding the possibility of combining a market-oriented business culture with innovation and entrepreneurial activity with a view to obtaining business performance gains.

  14. Contracting for Efficiency: A Best Practices Guide for Energy Efficient Product Procurement

    Energy Technology Data Exchange (ETDEWEB)

    Bunch, Saralyn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Payne, Christopher [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-11-01

    The requirement to buy energy- and water-efficient products applies to federal purchases made through any procurement pathway (e.g., purchase cards, e-retailers, and solicitations) and to a wide variety of federal projects. The Federal Energy Management Program’s (FEMP's) Buy Energy-Efficient Products buyer overview fact sheet and Contracting for Efficiency best practices guide for product procurement are designed to support federal buyers in the purchase of energy- and water-efficient products.

  15. Contracting for Efficiency. A Best Practices Guide for Energy-Efficient Product Procurement

    Energy Technology Data Exchange (ETDEWEB)

    Bunch, Saralyn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Payne, Christopher [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-04-01

    The requirement to buy energy- and water-efficient products applies to federal purchases made through any procurement pathway (e.g., purchase cards, e-retailers, and solicitations) and to a wide variety of federal projects. The Federal Energy Management Program’s (FEMP's) Buy Energy-Efficient Products buyer overview fact sheet and Contracting for Efficiency best practices guide for product procurement are designed to support federal buyers in the purchase of energy- and water-efficient products.

  16. Production of Energy Efficient Preform Structures (PEEPS)

    Energy Technology Data Exchange (ETDEWEB)

    Dr. John A. Baumann

    2012-06-08

    Due to its low density, good structural characteristics, excellent fabrication properties, and attractive appearance, aluminum metal and its alloys continue to be widely utilized. The transportation industry continues to be the largest consumer of aluminum products, with aerospace as the principal driver for this use. Boeing has long been the largest single company consumer of heat-treated aluminum in the U.S. The extensive use of aluminum to build aircraft and launch vehicles has been sustained, despite the growing reliance on more structurally efficient carbon fiber reinforced composite materials. The trend in the aerospace industry over the past several decades has been to rely extensively on large, complex, thin-walled, monolithic machined structural components, which are fabricated from heavy billets and thick plate using high speed machining. The use of these high buy-to-fly ratio starting product forms, while currently cost effective, is energy inefficient, with a high environmental impact. The widespread implementation of Solid State Joining (SSJ) technologies, to produce lower buy-to-fly ratio starting forms, tailored to each specific application, offers the potential for a more sustainable manufacturing strategy, which would consume less energy, require less material, and reduce material and manufacturing costs. One objective of this project was to project the energy benefits of using SSJ techniques to produce high-performance aluminum structures if implemented in the production of the world fleet of commercial aircraft. A further objective was to produce an energy consumption prediction model, capable of calculating the total energy consumption, solid waste burden, acidification potential, and CO2 burden in producing a starting product form - whether by conventional or SSJ processes - and machining that to a final part configuration. The model needed to be capable of computing and comparing, on an individual part/geometry basis, multiple possible

  17. Changes in production efficiency in China identification and measuring

    CERN Document Server

    Xu, Bing; Watada, Junzo

    2014-01-01

    Evaluating  Production Efficiency in China examines production from engineering and statistics perspectives rather than from economics and mathematics perspectives. The authors present an observable benchmark as the criterion of the production efficiency to replace the unobservable production frontier surface. This book discusses several different computing technologies, controllable variable as a path of identification, changes in production efficiency by decision making on specific operating conditions, and optimal resource allocation. The book provides a channel to tap inside the success stories of China, exploiting the way of changes in production efficiency during China’s development in the past 30 years. This book examines the concepts and realization of production efficiencies across all areas of the economy. Also the book provides the perspective of foreign direct investment (FDI) absorption to identify how Chinese economy changes in production efficiency.

  18. Maximum herd efficiency in meat production I. Optima for slaughter ...

    African Journals Online (AJOL)

    Profit rate for a meat production enterprise can be decomposed into the unit price for meat and herd efficiency. Optimal slaughter mass maximizesherd efficiency which, at its maximum,can be expressed in terms of a product of powers of growth and reproduction efficiencies. Likely regions of optimality for slaughter mass are ...

  19. A miniature turbocompressor system

    Energy Technology Data Exchange (ETDEWEB)

    Zwyssig, C.; Kraehenbuehl, D.; Kolar, J. W. [Swiss Federal Institute of Technology, Power Electronic Systems Laboratory, Zuerich (Switzerland); Weser, H. [High Speed Turbomaschinen GmbH, Wolfsburg (Germany)

    2008-07-01

    The trend in compressors for fuel cells, heat pumps, aerospace and automotive air pressurization, heating, ventilation and air conditioning systems, is towards ultra-compact size and high efficiency. This can be achieved by increasing the rotational speed and employing new electrical drive system technology and materials. This paper presents a miniature, electrically driven turbocompressor system running at a speed of 500,000 rpm. The design includes the thermodynamics, the electric motor, the inverter, the control and the system integration with rotor dynamics and thermal considerations. In the experimental setup, the specified pressure ratio of 1.6 is achieved at a speed of 550,000 rpm, which is slightly higher than the design speed. (author)

  20. Miniaturized High Performance Optical Gyroscope Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose a new approach for to the design and fabrication of miniaturized Interferometric Fiber Optical Gyroscope (FOG) that enables the production of smaller IRU...

  1. Efficiency of seed production in southern pine seed orchards

    Science.gov (United States)

    David L. Bramlett

    1977-01-01

    Seed production in southern pine seed orchards can be evaluated by estimating the efficiency of four separate stages of cone, seed, and seedling development. Calculated values are: cone efficiency (CE), the ratio of mature cones to the initial flower crop; seed efficiency (SE), the ratio of filled seeds per cone to the seed potential; extraction efficiency (EE), the...

  2. Study of miniature and microminiature satellite technology

    Science.gov (United States)

    Kaneko, Kazuhisa

    1992-07-01

    An overview of the study on miniaturized satellite missions for the purpose of communication, broadcasting, earth observation, space environment utilization, global positioning, lunar exploration, solar-terrestrial science observation, and astronomical observation is presented. The results from examination of documents and periodicals of technologies expected to be usable for satellite miniaturization is outlined by subsystem, such as orbit and attitude control, electric power, communication, thermal control, and other subsystems. Technical measures for upgrading heat radiation and solar battery efficiencies, and antenna gain are proposed. The results of the study of super-miniature satellite system model (low orbit data relay satellite system for earth observation satellite to process many data) are outlined.

  3. Technical efficiency of irrigated vegetable production among ...

    African Journals Online (AJOL)

    Data collected were subjected to analysis using descriptive statistics, stochastic frontier model, gross margin and net farm income. The study revealed that farm size, labour and fertilizer positively affect the technical efficiency of the farmers. The mean technical efficiency was 68.5 and vegetable farmers were not operating at ...

  4. From Policy to Compliance: Federal Energy Efficient Product Procurement

    Energy Technology Data Exchange (ETDEWEB)

    DeMates, Laurèn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Scodel, Anna [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-09-06

    Federal buyers are required to purchase energy-efficient products in an effort to minimize energy use in the federal sector, save the federal government money, and spur market development of efficient products. The Federal Energy Management Program (FEMP)’s Energy Efficient Product Procurement (EEPP) Program helps federal agencies comply with the requirement to purchase energy-efficient products by providing technical assistance and guidance and setting efficiency requirements for certain product categories. Past studies have estimated the savings potential of purchasing energy-efficient products at over $500 million per year in energy costs across federal agencies.1 Despite the strong policy support for EEPP and resources available, energy-efficient product purchasing operates within complex decision-making processes and operational structures; implementation challenges exist that may hinder agencies’ ability to comply with purchasing requirements. The shift to purchasing green products, including energy-efficient products, relies on “buy in” from a variety of potential actors throughout different purchasing pathways. Challenges may be especially high for EEPP relative to other sustainable acquisition programs given that efficient products frequently have a higher first cost than non-efficient ones, which may be perceived as a conflict with fiscal responsibility, or more simply problematic for agency personnel trying to stretch limited budgets. Federal buyers may also face challenges in determining whether a given product is subject to EEPP requirements. Previous analysis on agency compliance with EEPP, conducted by the Alliance to Save Energy (ASE), shows that federal agencies are getting better at purchasing energy-efficient products. ASE conducted two reviews of relevant solicitations for product and service contracts listed on Federal Business Opportunities (FBO), the centralized website where federal agencies are required to post procurements greater

  5. Photobiological hydrogen production : photochemical efficiency and bioreactor design

    NARCIS (Netherlands)

    Akkerman, I.; Janssen, M.; Rocha, J.; Wijffels, R.H.

    2002-01-01

    Biological production of hydrogen can be carried out by photoautotrophic or photoheterotrophic organisms. Here, the photosystems of both processes are described. The main drawback of the photoautotrophic hydrogen production process is oxygen inhibition. The few efficiencies reported on the

  6. Efficient production of high-rise buildings

    OpenAIRE

    Hoseini, Hanif

    2007-01-01

    Production of one family houses has over time developed successfully in Sweden and producers have managed to reduce the production costs and industrialize the production process. The development has however not been that successful when it comes to high-rise buildings. There are many attempts made, but no one has really managed to create a product that can persuade the market. The systems used are not flexible and cannot cope very well with variations in the design. The aim of this work has b...

  7. Butanol production by fermentation: efficient bioreactors

    Science.gov (United States)

    Energy security, environmental concerns, and business opportunities in the emerging bio-economy have generated strong interest in the production of n-butanol by fermentation. Acetone butanol ethanol (ABE or solvent) batch fermentation process is product limiting because butanol even at low concentra...

  8. High Efficiency Solar Integrated Roof Membrane Product

    Energy Technology Data Exchange (ETDEWEB)

    Partyka, Eric; Shenoy, Anil

    2013-05-15

    This project was designed to address the Solar Energy Technology Program objective, to develop new methods to integrate photovoltaic (PV) cells or modules within a building-integrated photovoltaic (BIPV) application that will result in lower installed cost as well as higher efficiencies of the encapsulated/embedded PV module. The technology assessment and development focused on the evaluation and identification of manufacturing technologies and equipment capable of producing such low-cost, high-efficiency, flexible BIPV solar cells on single-ply roofing membranes.

  9. Information structure and efficiency in speech production

    NARCIS (Netherlands)

    van Son, R.J.J.H.; Pols, L.C.W.

    2003-01-01

    Speech is considered an efficient communication channel. This implies that the organization of utterances is such that more speaking effort is directed towards important parts than towards redundant parts. Based on a model of incremental word recognition, the importance of a segment is defined as

  10. Efficiency Analysis of Southeastern U.S. Meat Goat Production

    OpenAIRE

    Qushim, Berdikul; Gillespie, Jeffrey; McMillin, Kenneth

    2015-01-01

    Technical efficiency, scale and scope economies, marginal productive contributions for inputs and outputs, and efficiency drivers were determined for the Southeastern U.S meat goat enterprise. The average technical efficiency was 0.88. We find increasing returns to scale and scope economies for Southeastern U.S. meat goat enterprises.

  11. Maximizing Light Utilization Efficiency and Hydrogen Production in Microalgal Cultures

    Energy Technology Data Exchange (ETDEWEB)

    Melis, Anastasios [Univ. of California, Berkeley, CA (United States)

    2014-12-31

    The project addressed the following technical barrier from the Biological Hydrogen Production section of the Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan: Low Sunlight Utilization Efficiency in Photobiological Hydrogen Production is due to a Large Photosystem Chlorophyll Antenna Size in Photosynthetic Microorganisms (Barrier AN: Light Utilization Efficiency).

  12. Post-harvest production efficiency and output elasticity in cassava ...

    African Journals Online (AJOL)

    The study showed that in some agricultural zones in Rivers State and, in some products, there were negative response. A negative response to input use is an indication or suggests allocation inefficiency. Output efficiency measurement is very important in agricultural production in a profit oriented enterprise. Efficiency in ...

  13. Estimating Production Technical Efficiency of Irvingia Seed (Ogbono ...

    African Journals Online (AJOL)

    This study estimated the production technical efficiency of irvingia seed (Ogbono) farmers in Nsukka agricultural zone in Enugu State, Nigeria. This is against the backdrop of the importance of efficiency as a factor of productivity in a growing economy like Nigeria where resources are scarce and opportunities for new ...

  14. Resource Use Efficiency in Rice Production in Jere Local ...

    African Journals Online (AJOL)

    Resource Use Efficiency in Rice Production in Jere Local Government Area of Borno State, Nigeria. ... Also, majority (60%) indicated their major occupation as farming, most (51%) had no formal education while, (37%) had between 11–30 years of farming experience. The results of resource use efficiency in rice production ...

  15. Engineering microbes for efficient production of chemicals

    Science.gov (United States)

    Gong, Wei; Dole, Sudhanshu; Grabar, Tammy; Collard, Andrew Christopher; Pero, Janice G; Yocum, R Rogers

    2015-04-28

    This present invention relates to production of chemicals from microorganisms that have been genetically engineered and metabolically evolved. Improvements in chemical production have been established, and particular mutations that lead to those improvements have been identified. Specific examples are given in the identification of mutations that occurred during the metabolic evolution of a bacterial strain genetically engineered to produce succinic acid. This present invention also provides a method for evaluating the industrial applicability of mutations that were selected during the metabolic evolution for increased succinic acid production. This present invention further provides microorganisms engineered to have mutations that are selected during metabolic evolution and contribute to improved production of succinic acid, other organic acids and other chemicals of commercial interest.

  16. Multidirectional analysis of technical efficiency for pig production systems

    DEFF Research Database (Denmark)

    Labajavo, Katarina; Hansson, Helena; Asmild, Mette

    2016-01-01

    Declining profitability and ongoing structural changes in the pig sector require thorough efficiency analysis of individual production factors. In this study we calculated technical efficiency indices for each input and output using multidirectional efficiency analysis and examined the relationship...... between ‘farm-specific characteristics’ and input and output technical efficiencies by production type (piglet, growing-finishing, finish-to-farrow). The results indicated that advisory services and farm location were not significantly correlated with technical efficiency. Similar results were obtained...... for ‘housing practices’, with the exception of the latest technology such as heated floors in relation to input labour technical efficiency for growing-finishing and finish-to-farrow productions. Use of written instructions for feeding for growing-finishing and finish-to-farrow production and written...

  17. Business strategies, profitability and efficiency of production

    OpenAIRE

    S. Alarcón; M. Sánchez

    2013-01-01

    The strategy choices of market-oriented companies are a topic now under wide investigation in the analysis of business performance antecedents. The purpose of this study is to examine the outcomes of the combination of three different organizational strategies (market orientation, innovativeness and entrepreneurial orientation) on business performance indicators. Models using profitability and efficiency indicators are proposed with the specific aim of obtaining a deeper analysis of the relat...

  18. Miniaturization of Spherical Magnetodielectric Antennas

    DEFF Research Database (Denmark)

    Hansen, Troels Vejle

    The fundamental limitations in performance of electrically small antennas (ESAs) - and how far these may be approached - have been of great interest for over a century. Particularly over the past few decades, it has become increasingly relevant and important, to approach these limits in view...... to the important antenna parameters of radiation efficiency e and impedance bandwidth. For single-mode antennas the fundamental minimum Q is the Chu lower bound. In this Ph.D. dissertation, the topic is miniaturization of spherical antennas loaded by an internal magnetodielectric core. The goal is to determine......, quantify, and assess the effects of an internal material loading upon antenna performance, including its potentials towards miniaturization. Emphasis have been upon performing an exhaustive and exact analysis of rigorous validity covering a large class of spherical antennas. In the context of this study...

  19. allocative efficiency, employment and rice production risk

    African Journals Online (AJOL)

    2004-12-02

    Dec 2, 2004 ... Horowitz and Litchtenberg ( 1994) and Torkamani and Ha'rdaker. (1996) have also addressed the impact of farmer risk aversion on production practices. Studies that'focused on tropical rice produc- tion by Brosen et. al. (1987) and Sasmal (1993) show that risk aver- sion is not an impediment to resource ...

  20. Relationship between tissue retention efficiency and production ...

    African Journals Online (AJOL)

    An experiment was conducted using 96 individually caged male broilers between 49 and 77 d of age. One objective was to establish phenotypic relationships between some production traits [feed conversion ratio (FCR), feed consumption, residual feed consumption (RFC), relative weight gain (RWG), weight gain (WG) and ...

  1. Photosynthetic efficiency in microalgal lipid production

    NARCIS (Netherlands)

    Remmers, Ilse M.

    2017-01-01

    Microalgae can contain large amounts of lipids which make them a promising feedstock for sustainable production of food, feed, fuels and chemicals. Various studies, including pilot-scale, have been performed and the knowledge on microalgal processes has advanced quickly. Unfortunately, current

  2. Improving Farmers' Efficiency in Rice Production In Nigeria: The ...

    African Journals Online (AJOL)

    This paper assesses the effects of extension services on farmers' efficiency and productivity in rice production in Kano State, Nigeria. Data for the study were collected from 126 rice farmers selected using multi stage sampling technique. Stochastic production frontier function was estimated to ascertain the effects of ...

  3. Technical efficiency of watermelon ( Citrullus lanatus ) production in ...

    African Journals Online (AJOL)

    This study was designed to measure the level of technical efficiency, its determinants in watermelon (Citrullus lanatus) production and the constraints in the production system in Yewa North Local Government of Ogun State using a stochastic frontier production function. A combination of purposive and random sampling ...

  4. An analysis of the productivity and technical efficiency of smallholder ...

    African Journals Online (AJOL)

    This study used the stochastic frontier production function to analyse the productivity and technical efficiency of 4 different agricultural production systems in Ethiopia; namely, irrigated seasonal farms on traditional irrigation systems, irrigated seasonal farms on modern communal irrigation systems, rainfed seasonal farms for ...

  5. Miniature Release Mechanism Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective is to design, build and functionally test a miniature release mechanism for CubeSats and other small satellites. The WFF 6U satellite structure will be...

  6. Miniature oxygen resuscitator

    Science.gov (United States)

    Johnson, G.; Teegen, J. T.; Waddell, H.

    1969-01-01

    Miniature, portable resuscitation system is used during evacuation of patients to medical facilities. A carrying case contains a modified resuscitator head, cylinder of oxygen, two-stage oxygen regulator, low pressure tube, and a mask for mouth and nose.

  7. An Empirical Study of Strategic Positioning and Production Efficiency

    OpenAIRE

    Hsihui Chang; Guy D. Fernando; Arindam Tripathy

    2015-01-01

    We examine the relationship between strategic positioning of firms and their production efficiency. Firms with competitive advantages based on either cost leadership or differentiation are able to outperform their competitors. Firms pursuing a cost leadership strategy seek to be the lowest cost producer, primarily by minimizing inputs for a given level of output, thus concentrating on increasing the efficiency of their production processes. On the other hand, firms that pursue a differentiat...

  8. Implications of energy efficiency measures in wheat production

    DEFF Research Database (Denmark)

    Meyer-Aurich, Andreas; Ziegler, T.; Scholz, L.

    The economic and environmental effect of energy saving measures were analyzed for a typical wheat production system in Germany. The introduction of precision farming, reduced nitrogen fertilization and improved crop drying technologies proved to be efficient measures for enhancing energy efficiency...

  9. Productive efficiency of tea industry: A stochastic frontier approach ...

    African Journals Online (AJOL)

    In an economy where recourses are scarce and opportunities for a new technology are lacking, studies will be able to show the possibility of raising productivity by improving the industry's efficiency. This study attempts to measure the status of technical efficiency of tea-producing industry for panel data in Bangladesh using ...

  10. Technical Efficiency and Productivity for Higher Education Institutions in Sweden

    Science.gov (United States)

    Andersson, C.; Antelius, J.; Månsson, J.; Sund, K.

    2017-01-01

    This study investigates technical efficiency and productivity for Swedish higher education institutions (HEIs). One identified problem in previous research concerns adjusting efficiency scores for input quality. This problem is avoided using grades from upper-secondary schools. A second problem concerns heterogeneity with respect to subjects and…

  11. Energy efficient multistage zeolite drying for heat sensitive products

    NARCIS (Netherlands)

    Djaeni, M.

    2008-01-01

    Although drying takes a significant part of the total energy usage in industry, currently available drying technology is often not efficient in terms of energy consumption. Generally, the energy efficiency for drying processes ranges between 20-60% depending on the dryer type and product to be

  12. Water and nitrogen use efficiencies in citrus production

    NARCIS (Netherlands)

    Qin, Wei; Assinck, F.B.T.; Heinen, Marius; Oenema, Oene

    2016-01-01

    Water and nitrogen (N) are two key limiting factors for citrus production. Reported effects of water and N inputs on citrus yield, water use efficiency (WUE) and N use efficiency (NUE) vary greatly, mainly due to differences in cultivars, tree age, climate, soil types, and water and N input

  13. Resource-Use Efficiency in Rice Production Under Small Scale ...

    African Journals Online (AJOL)

    acer

    ABSTRACT: The study was conducted in Bunkure Local Government Area of Kano State to appraise the efficiency of the resources used in rice production under small scale irrigation. The specific objectives of the study were to determine resource use efficiency, describe socio-economic characteristics of irrigated rice ...

  14. Efficiency And Import Penetration On The Productivity Of Textile Industry And Textile Products

    Directory of Open Access Journals (Sweden)

    Catur B Rakhmawan, Djoni Hartono, Agni A Awirya

    2015-08-01

    Full Text Available Although textile industry and textile products belong to the strategic sub sector of manufacturing industry in Indonesia, they are facing pro-blems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the average level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.Keywords:Efficiency, Productivity, Import Penetration, DEA, Fixed Effect

  15. Environmental assessment for the Consumer Products Efficiency Standards program

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-23

    The Energy Policy and Conservation Act of 1975 as amended by the National Energy Conservation Policy Act of 1978, requires the DOE to prescribe energy efficiency standards for thirteen consumer products. The Consumer Products Efficiency Standards (CPES) program covers the following products: refrigerators and refrigerator-freezers; freezers;clothes dryers;water heaters; room air conditioners; home heating equipment (not including furnaces); kitchen ranges and ovens; central air conditioners (cooling and heat pumps); furnaces; dishwashers; television sets; clothes washers; and humidifiers and dehumidifiers. DOE is proposing two sets of standards for all thirteen consumer products: intermediate standards to become effective in 1981 for the first nine products and in 1982 for the second four products, and final standards to become effective in 1986 and 1987, respectively. The final standards are more restrictive than the intermediate standards and will provide manufacturers with the maximum time permitted under the Act to plan and develop extensive new lines of efficient consumer products. The final standards proposed by DOE require the maximum improvements in efficiency which are technologically feasible and economically justified, as required by Section 325(c) of EPCA. The thirteen consumer products account for approximately 90% of all the energy consumed in the nation's residences, or more than 20% of the nation's energy needs. Increases in the energy efficiency of these consumer products can help to narrow the gap between the nation's increasing demand for energy and decreasing supplies of domestic oil and natural gas. Improvements in the efficiency of consumer products can thus help to solve the nation's energy crisis.

  16. Production technology for high efficiency ion implanted solar cells

    Science.gov (United States)

    Kirkpatrick, A. R.; Minnucci, J. A.; Greenwald, A. C.; Josephs, R. H.

    1978-01-01

    Ion implantation is being developed for high volume automated production of silicon solar cells. An implanter designed for solar cell processing and able to properly implant up to 300 4-inch wafers per hour is now operational. A machine to implant 180 sq m/hr of solar cell material has been designed. Implanted silicon solar cells with efficiencies exceeding 16% AM1 are now being produced and higher efficiencies are expected. Ion implantation and transient processing by pulsed electron beams are being integrated with electrostatic bonding to accomplish a simple method for large scale, low cost production of high efficiency solar cell arrays.

  17. Resource efficiency potential of selected technologies, products and strategies.

    Science.gov (United States)

    Rohn, Holger; Pastewski, Nico; Lettenmeier, Michael; Wiesen, Klaus; Bienge, Katrin

    2014-03-01

    Despite rising prices for natural resources during the past 30 years, global consumption of natural resources is still growing. This leads to ecological, economical and social problems. So far, however, limited effort has been made to decrease the natural resource use of goods and services. While resource efficiency is already on the political agenda (EU and national resource strategies), there are still substantial knowledge gaps on the effectiveness of resource efficiency improvement strategies in different fields. In this context and within the project "Material Efficiency and Resource Conservation", the natural resource use of 22 technologies, products and strategies was calculated and their resource efficiency potential analysed. In a preliminary literature- and expert-based identification process, over 250 technologies, strategies, and products, which are regarded as resource efficient, were identified. Out of these, 22 subjects with high resource efficiency potential were selected. They cover a wide range of relevant technologies, products and strategies, such as energy supply and storage, Green IT, transportation, foodstuffs, agricultural engineering, design strategies, lightweight construction, as well as the concept "Using Instead of Owning". To assess the life-cycle-wide resource use of the selected subjects, the material footprint has been applied as a reliable indicator. In addition, sustainability criteria on a qualitative basis were considered. The results presented in this paper show significant resource efficiency potential for many technologies, products and strategies. Copyright © 2013. Published by Elsevier B.V.

  18. Water use efficiency of net primary production in global terrestrial ...

    Indian Academy of Sciences (India)

    Water use efficiency; global terrestrial ecosystems; MODIS; net primary production; evapotranspiration;. Köppen–Geiger climate classification. ... Terrestrial plants fix or trap carbon dioxide via photosynthesis to produce the material ...... S W 2007 Evaluating water stress controls on primary production in biogeochemical and ...

  19. Technical efficiency in pig production in Akwa Ibom State, Nigeria ...

    African Journals Online (AJOL)

    This study was designed to measure the level of technical efficiency and its determinants in pig production in Akwa Ibom State, Nigeria using a stochastic frontier production function. Multistage random sampling technique was used to select 60 pig farms from which input-output data were collected in 2004. The estimated ...

  20. Profitability And Resource Use Efficiency In Maize Production In ...

    African Journals Online (AJOL)

    The study examined profitability and resource-use efficiency in Maize Production in Kontagora Local Government Area of Niger State, Nigeria during 2007 cropping season. Primary data were collected and analyzed using farm budgeting techniques and Production Function Analysis. Results indicated that farmers realized ...

  1. labour productivity and resource use efficiency amongst smallholder ...

    African Journals Online (AJOL)

    The study examined labour productivity and resource efficiency amongst smallholder cocoa farmers in Abia. State, Nigeria. A purposive random sampling ... labour becomes most alarming. Cocoa, botanically known as Theobroma ..... adaptation to the effects of climate change on cocoa production in Ondo State, Nigeria.

  2. Cambridge journals blog: Improving feed efficiency in dairy production

    Science.gov (United States)

    Because the cost of feeding animals is one of the greatest expenses in dairy production (40-60% of production costs), research focused on ways to identify and select for animals that are the most efficient at converting feed into milk has greatly expanded during the last decade. The animal Article o...

  3. Endogeneity Corrected Stochastic Production Frontier and Technical Efficiency

    NARCIS (Netherlands)

    Shee, A.; Stefanou, S.E.

    2015-01-01

    A major econometric issue in estimating production parameters and technical efficiency is the possibility that some forces influencing production are only observed by the firm and not by the econometrician. Not only can this misspecification lead to a biased inference on the output elasticity of

  4. Measurement of Efficiency of Yam Production in Nasarawa State ...

    African Journals Online (AJOL)

    Price of planting materials (p=0.01), price of fertilizer used (p=0.01) and capital inputs (p=0.01) were significant factors that strongly determined yam production. However, the factors that strongly determined economic efficiency of yam production in Nasarawa State were age (p=0.01), household size (p=0.01) farm size ...

  5. Technical efficiency of upland and lowland rice production ...

    African Journals Online (AJOL)

    The paper examined the efficiency of upland and lowland rice production systems in a prominent rice producing State (Niger State) in Nigeria using descriptive statistics, stochastic production frontier model as well as inefficiency model. The data used were generated from a farm survey involving 240 rice farmers' randomly ...

  6. Efficiency Determination Tests for the Biocidal Products for Quality Control

    OpenAIRE

    Çelik, İrem; Akça, Gülin; Ceylan, Erdem

    2015-01-01

    Biocidal (bactericidal and fungicidal) products produced in the pharmaceutical industry should be tested according to EN 1276 (Evaluation of chemical disinfectants and antiseptics/bactericidal activities), TS EN 1275 (Chemical disinfectants and antiseptics/Basic Fungicidal Activity), TS EN 1040 (Chemical disinfectants and antiseptics/Basic bactericidal activity) standards. Efficiency determination tests are required to determine the quality control of the biocidal products microbiologically. ...

  7. HEALTH, TECHNICAL EFFICIENCY, AND AGRICULTURAL PRODUCTION IN INDIAN DISTRICTS.

    Science.gov (United States)

    Venkataramani, Atheendar S; Shanmugam, K R; Ruger, Jennifer Prah

    2010-12-01

    We investigate whether better population health may impact economic performance through improvements in technical efficiency in agricultural production. Using district-level data from India, we employ a random-coefficients approach to estimate a Cobb-Douglas production function, computing overall and input-specific technical efficiencies for each district. We then model health (district infant mortality rate) as a determinant of (in)efficiency in a second stage, controlling for a range of other socioeconomic variables. In the preferred specifications, we find that decreases in the infant mortality rate are associated with substantively and statistically significant increases in overall technical efficiency, and that a good portion of this association is likely due to improvements in the efficiency of labor use.

  8. POSSIBILITIES OF INCREASING EFFICIENCY WITHIN SERIAL PRODUCTION MANAGEMENT

    Directory of Open Access Journals (Sweden)

    CODRUŢA DURA

    2010-01-01

    Full Text Available Under the impact of transition to the new post-industrial society, massproduction recently faced the most numerous difficulties. They are caused by turbulences in theexternal environment in which companies operate, manifested in particular by enhancing thedynamism of markets and by deep changes in the structure of consumers’ demands. In thiscontext, specialized literature records the concerns for increasing the efficiency and flexibilityof products, elements involving radical changes of management and manufacturingtechnologies methods. Given these issues, the paper approaches two separate ways to improvethe management of serial production: increasing economic efficiency by optimizing the size ofbatches and flexible production systems by implementing techniques to reduce the change-overtime.

  9. Environmental assessment. Energy efficiency standards for consumer products

    Energy Technology Data Exchange (ETDEWEB)

    McSwain, Berah

    1980-06-01

    The Energy Policy and Conservation Act of 1975 requires DOE to prescribe energy efficiency standards for 13 consumer products. The Consumer Products Efficiency Standards (CPES) program covers: refrigerators and refrigerator-freezers, freezers, clothes dryers, water heaters, room air conditioners, home heating equipment, kitchen ranges and ovens, central air conditioners (cooling and heat pumps), furnaces, dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers. This Environmental Assessment evaluates the potential environmental and socioeconomic impacts expected as a result of setting efficiency standards for all of the consumer products covered by the CPES program. DOE has proposed standards for eight of the products covered by the Program in a Notice of Proposed Rulemaking (NOPR). DOE expects to propose standards for home heating equipment, central air conditioners (heat pumps only), dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers in 1981. No significant adverse environmental or socioeconomic impacts have been found to result from instituting the CPES.

  10. Efficiency and Import Penetrationon the Productivity of Textile Industry and Textile Products

    Directory of Open Access Journals (Sweden)

    Catur Basuki Rakhmawan

    2012-12-01

    Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the ave-rage level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

  11. Efficiency and Import Penetration on the Productivity of Textile Industry and Textile Products

    Directory of Open Access Journals (Sweden)

    Catur Basuki Rakhmawan

    2012-12-01

    Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the average level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

  12. Technical Efficiency and Its Determinants of Rice Production in Cambodia

    Directory of Open Access Journals (Sweden)

    Sokvibol Kea

    2016-10-01

    Full Text Available The present study aims to measure the technical efficiency and establish core factors affecting rice production in Cambodia. A four‐year dataset generated from the central government document “Profile on Economics and Social” of 25 entire provinces between 2012 and 2015 and the stochastic production frontier model (SFA was applied. The results indicated that the level of output (quantity of Cambodian rice production varied according to the different level of capital investment in agricultural machineries, total rice actual harvested area, and technical fertilizer application within provinces. Furthermore, evidence revealed that the overall mean efficiency of rice production is 78.4%, which implies that there is still room to further improve technical efficiency given the same level of inputs and technology. More importantly, the findings revealed that irrigation, production techniques and amount of agricultural supporting staff are the most important influencing factors of rice production’s technical efficiency in Cambodia. In conclusion, the present study strongly recommends the development of irrigation systems and good water management practices to be considered and bring about more effective actions by the central government as well as related agencies for improving rice production in Cambodia in addition to capital investment and improving technical skills of supporting staff and rural farmers.

  13. Antenna Miniaturization with MEMS Tunable Capacitors

    DEFF Research Database (Denmark)

    Barrio, Samantha Caporal Del; Morris, Art; Pedersen, Gert Frølund

    2014-01-01

    In today’s mobile device market, there is a strong need for efficient antenna miniaturization. Tunable antennas are a very promising way to reduce antenna volume while enlarging its operating bandwidth. MEMS tunable capacitors are state-ofthe- art in terms of insertion loss...... and their characteristics are used in this investigation. This paper uses field simulations to highlight the trade-offs between the design of the tuner and the design of the antenna, especially the impact of the location of the tuner and the degree of miniaturization. Co-designing the tuner and the antenna is essential...

  14. Efficiency of dairy production on a family farm

    Directory of Open Access Journals (Sweden)

    Zoran Grgić

    2002-01-01

    Full Text Available This paper presents the evaluation of economic efficiency of dairyproduction on a family farm with 14 dairy cows in the breeding stock, and with average production from 3.206 to 3.407 lit. of milk annually. On the basis of survey data for three-year period from 1998 to 2000, economic indicators were calculated, as well as the cost price of milk, income and the revenue of total production and per production head. In the family farm with an average annual sale from 2.827 to 2.972 lit. of milk per head, total revenue has been realized from 44.884 to 47.695 kuna and the profit from 606 to 8.515 kuna. Revenues per production head were from 5.655 to 6.495 kuna and the profitfrom 177 to 726 kuna. The milk cost price in the analyzed period was 1.71, 1.66 and 1.69 kn. per lit, and the profit per liter of milk was 0.06, and 0.21 kn. Basic economic indicators point out on efficiency of dairy production for the investigated farm on the stated production level. The biggest influence on the dairy production efficiency on the farm, regarding the cost price structure, has been registered from the costs of fodder production, while the favorable parity of the cost price and producer-sale price of milk determines the increase in dairy production efficiency and income from dairy production in the analyzed period.

  15. The productive efficiency in agriculture: recent methodological advances

    OpenAIRE

    Guesmi, Bouali

    2014-01-01

    Firm-level productivity and efficiency analyses have important implications for the evaluation of their economic viability and sustainability. The assessment of a firm's performance requires the use of an adequate methodological approach to derive sound efficiency estimates. By targeting economic sectors not previously investigated and using new methodological approaches, this thesis contributes to the literature both from a methodological and empirical point of view. Three specific object...

  16. Energy Efficiency Indicators for Public Electricity Production from Fossil Fuels

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This paper presents a set of indicators that are used to analyse the energy efficiency of electricity production from fossil fuels on a global level and for a number of key countries and regions. The analysis is based on IEA statistics and includes public electricity plants and public CHP plants. Electricity production by autoproducers is not included and represents less than 6% of global electricity production. However, the share of autoproducers is significant in certain countries, particularly in Europe. Austria, Finland, Luxembourg, the Netherlands and Spain all have a share of electricity production from autoproducers that is more than twice the global average.

  17. Greenhouse strawberry production in Iran, efficient or inefficient in energy

    Energy Technology Data Exchange (ETDEWEB)

    Banaeian, N.; Omid, M.; Ahmadi, H. [Department of Agricultural Machinery Engineering, Faculty of Agricultural Engineering and Technology, School of Agriculture and Natural Resources, University of Tehran, Karaj (Iran, Islamic Republic of)

    2012-05-15

    This paper attempts to identify origins of inefficient used resource for greenhouse strawberry production in Tehran. A nonparametric method, data envelopment analysis (DEA), was used to study the technical efficiency of producers with regard to effective energy utilization on strawberry yield. Data for the production of strawberries were collected from 25 greenhouses by using a face-to-face questionnaire method. Both constant and variable returns to scale DEA models were used to evaluate and rank technical efficiency of greenhouses based on four energy inputs: fertilizer, human labor, diesel fuel, and electricity. Pure technical efficiency specification shows that 10 greenhouses are producing at an efficient scale. The study has also helped to segregate efficient greenhouses from inefficient ones to get insights into the performance of individual producers, to identify wasteful uses of energy, and to suggest reasonable savings in energy uses from different sources. The results reveal that, on an average, about 16% of the total input energy could be saved if the producers follow the input package recommended by the study. The results of analysis show that DEA is a pivotal tool for analyzing productive efficiency of agricultural units.

  18. What factors affect the productivity and efficiency of physician practices?

    Science.gov (United States)

    Sunshine, Jonathan H; Hughes, Danny R; Meghea, Cristian; Bhargavan, Mythreyi

    2010-02-01

    Increasing the productivity and efficiency of physician practices could help relieve the rapid growth of US healthcare costs and the expected physician shortage. Radiology practices are an attractive specific focus for research on practices' productivity and efficiency because they are home to many purportedly productivity-enhancing operational technologies. This affords an opportunity to study the effect of production technology on physicians' output. As well, radiology is a leader in the general movement of physicians out of very small practices. And imaging is by the fastest-growing category of physician expenditure. Using data from 2003 to 2007 surveys of radiologists, we estimate a stochastic frontier model to study the effects of practice characteristics, such as work hours, practice size, and output mix, and technologies used in work production, on practices' productivity and efficiency. At the mean, the elasticities of output with respect to practice size and annual hours worked per full-time physician were 0.73 and 0.51, respectively. Some production technologies increase productivity by 15% to 20%; others generate no increase. Using "nighthawks"--ie, contracting out after-hours work to external firms that consolidate workflow--significantly increases practice efficiency. The general US trend toward larger practice size is unlikely to relieve cost or physician shortage pressures. The actual effect of purportedly productivity-enhancing operational technologies needs to be carefully evaluated before they are widely adopted. As the recently-developed innovations of nighthawks and hospitalists show, practices should give more attention to a possible choice to "buy," rather than "make," part of their output.

  19. The Problem of Efficiency of the Consumption or Production

    Directory of Open Access Journals (Sweden)

    Catalin Angelo Ioan

    2012-08-01

    Full Text Available The consumption efficiency, or production respectively, are of particular importance in the view of Pareto efficiency. The classical analysis for two goods or two factors of production, is based on the Edgeworth’s box that allows determining the optimal quantity, and price equilibrium. The analysis which will follow, will deal this problem for the case of n goods or inputs, obtaining a general method for determining the optimal quantities, namely the equilibrium price using a series of relatively basic geometric tools.

  20. Biodiversity influences plant productivity through niche-efficiency.

    Science.gov (United States)

    Liang, Jingjing; Zhou, Mo; Tobin, Patrick C; McGuire, A David; Reich, Peter B

    2015-05-05

    The loss of biodiversity is threatening ecosystem productivity and services worldwide, spurring efforts to quantify its effects on the functioning of natural ecosystems. Previous research has focused on the positive role of biodiversity on resource acquisition (i.e., niche complementarity), but a lack of study on resource utilization efficiency, a link between resource and productivity, has rendered it difficult to quantify the biodiversity-ecosystem functioning relationship. Here we demonstrate that biodiversity loss reduces plant productivity, other things held constant, through theory, empirical evidence, and simulations under gradually relaxed assumptions. We developed a theoretical model named niche-efficiency to integrate niche complementarity and a heretofore-ignored mechanism of diminishing marginal productivity in quantifying the effects of biodiversity loss on plant productivity. Based on niche-efficiency, we created a relative productivity metric and a productivity impact index (PII) to assist in biological conservation and resource management. Relative productivity provides a standardized measure of the influence of biodiversity on individual productivity, and PII is a functionally based taxonomic index to assess individual species' inherent value in maintaining current ecosystem productivity. Empirical evidence from the Alaska boreal forest suggests that every 1% reduction in overall plant diversity could render an average of 0.23% decline in individual tree productivity. Out of the 283 plant species of the region, we found that large woody plants generally have greater PII values than other species. This theoretical model would facilitate the integration of biological conservation in the international campaign against several pressing global issues involving energy use, climate change, and poverty.

  1. Biodiversity influences plant productivity through niche–efficiency

    Science.gov (United States)

    Liang, Jingjing; Zhou, Mo; Tobin, Patrick C.; McGuire, A. David; Reich, Peter B.

    2015-01-01

    The loss of biodiversity is threatening ecosystem productivity and services worldwide, spurring efforts to quantify its effects on the functioning of natural ecosystems. Previous research has focused on the positive role of biodiversity on resource acquisition (i.e., niche complementarity), but a lack of study on resource utilization efficiency, a link between resource and productivity, has rendered it difficult to quantify the biodiversity–ecosystem functioning relationship. Here we demonstrate that biodiversity loss reduces plant productivity, other things held constant, through theory, empirical evidence, and simulations under gradually relaxed assumptions. We developed a theoretical model named niche–efficiency to integrate niche complementarity and a heretofore-ignored mechanism of diminishing marginal productivity in quantifying the effects of biodiversity loss on plant productivity. Based on niche–efficiency, we created a relative productivity metric and a productivity impact index (PII) to assist in biological conservation and resource management. Relative productivity provides a standardized measure of the influence of biodiversity on individual productivity, and PII is a functionally based taxonomic index to assess individual species’ inherent value in maintaining current ecosystem productivity. Empirical evidence from the Alaska boreal forest suggests that every 1% reduction in overall plant diversity could render an average of 0.23% decline in individual tree productivity. Out of the 283 plant species of the region, we found that large woody plants generally have greater PII values than other species. This theoretical model would facilitate the integration of biological conservation in the international campaign against several pressing global issues involving energy use, climate change, and poverty.

  2. Informatics in radiology: Efficiency metrics for imaging device productivity.

    Science.gov (United States)

    Hu, Mengqi; Pavlicek, William; Liu, Patrick T; Zhang, Muhong; Langer, Steve G; Wang, Shanshan; Place, Vicki; Miranda, Rafael; Wu, Teresa Tong

    2011-01-01

    Acute awareness of the costs associated with medical imaging equipment is an ever-present aspect of the current healthcare debate. However, the monitoring of productivity associated with expensive imaging devices is likely to be labor intensive, relies on summary statistics, and lacks accepted and standardized benchmarks of efficiency. In the context of the general Six Sigma DMAIC (design, measure, analyze, improve, and control) process, a World Wide Web-based productivity tool called the Imaging Exam Time Monitor was developed to accurately and remotely monitor imaging efficiency with use of Digital Imaging and Communications in Medicine (DICOM) combined with a picture archiving and communication system. Five device efficiency metrics-examination duration, table utilization, interpatient time, appointment interval time, and interseries time-were derived from DICOM values. These metrics allow the standardized measurement of productivity, to facilitate the comparative evaluation of imaging equipment use and ongoing efforts to improve efficiency. A relational database was constructed to store patient imaging data, along with device- and examination-related data. The database provides full access to ad hoc queries and can automatically generate detailed reports for administrative and business use, thereby allowing staff to monitor data for trends and to better identify possible changes that could lead to improved productivity and reduced costs in association with imaging services. © RSNA, 2011.

  3. Comparison of productive and reproductive efficiency of Afrino ...

    African Journals Online (AJOL)

    Comparison of productive and reproductive efficiency of Afrino, Dorper and Merino sheep in the False Upper Karoo. ... South African Journal of Animal Science ... A total of 1242 ewe reproductive records was available, while data of respectively 772 and 405 lambs were analysed for the growth traits and slaughter traits.

  4. Resource Use Efficiency in Sweet Potato Production in Kwara State ...

    African Journals Online (AJOL)

    This paper examines resource use efficiency in sweet potato production in Offa and Oyun local government areas of Kwara State of Nigeria. Primary data were collected from one hundred sweet potato farmers who were selected from the two local government areas during the 2003/2004 farming season. The data was ...

  5. Efficiency of resource - use in cassava production in Kogi State ...

    African Journals Online (AJOL)

    ... Kogi State to study the efficiency of resource use in cassava production and its implications on food security and environmental degradation. The study reveals that land, family labour, hired labour, fertilizer and planting materials are significant factors influencing the output of cassava. The scale coefficient is 1.304 hence, ...

  6. Economic efficiency of cocoa production in Ghana | Aneani | Journal ...

    African Journals Online (AJOL)

    The main purpose of this study was to analyze the economic efficiency of resource utilization in cocoa production among cocoa farmers in Ghana to provide information for effective application and management of farm input on cocoa farms. A random sample of 300 farmers was selected in six cocoa growing districts in ...

  7. Resource-use efficiency in okra production among smallholder ...

    African Journals Online (AJOL)

    Resource-use efficiency in okra production among smallholder farmers in Ika south and north east local government areas of Delta state, Nigeria. ... The coefficient of multiple determination (R2) was 0.501which indicates that 50.1% of the variation in the output of Okra was accounted for by the independent variables in the ...

  8. gender and relative production efficiency in food crop farming in ...

    African Journals Online (AJOL)

    In this study, food crop farmers in Abia State of Nigeria were disaggregated based on sex, their production efficiencies and returns to scale derived and compared. Primary data generated from a random sample of 87 food crop farmers consisting of 40 females and 47 males were used. The additive multiplicative dummy ...

  9. Allocative efficiency, employment and rice production risk: An ...

    African Journals Online (AJOL)

    A production function analysis was used to investigate resource use efficiency by smallholder rice farmers in the Upper East region of Ghana and its impact on employment. Data was collected from a random sample of 440 farmers during the 2001/2002 cropping seasons. Empirical results show that smallholder rice farmers ...

  10. Analysis of cost efficiency in small scale irrigated tomato production ...

    African Journals Online (AJOL)

    The result showed that there was relative presence of economies of scale among the farmers meaning that average farm in the study area produced at a minimum cost considering the size of the farm indicating that they operated in stage II of production surface. The mean cost efficiency of 1.09 obtained from the analysis ...

  11. Economic efficiency of maize production in Yola North Local ...

    African Journals Online (AJOL)

    This paper presents empirical evidence on the input-output relationship and the efficiency of resource use in maize production in Yola North Local Government Area of Adamawa state. A simple random sampling technique was employed and 120 maize farmers were selected from a population of 364. Data were analyzed ...

  12. The effect of slaughter weight on pig production efficiency | Pieterse ...

    African Journals Online (AJOL)

    The effect of slaughter weight on pig production efficiency. E. Pieterse, L.P. Loots, J. Viljoen. Abstract. (South African J of Animal Science, 2000, 30, Supplement 1: 115-117). Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  13. Production Cost Efficiency and Profitability of Abakaliki Rice in ...

    African Journals Online (AJOL)

    The study focused on the production cost efficiency and profitability of Abakaliki rice in Ihialia Local Government Area of Anambra State, Nigeria.. A random sampling technique was employed to select a total of 100 Abakaliki rice farmers from the study area. Data collection was achieved through the administration of ...

  14. Wood energy production efficiency in Akinyele local government ...

    African Journals Online (AJOL)

    A study was carried out to determine the efficiency of wood energy production in Akinyele Local Government of Oyo State. Ten fuelwood and five charcoal wood species were selected as samples using availability as criterion. Energy parameters including moisture, ash and energy contents, and density of the samples were ...

  15. Resource Use Efficiency in Rice Production in Jere Local ...

    African Journals Online (AJOL)

    acer

    Engineering, Ramat Polytechnic Maiduguri, Borno State, Nigeria. 2Department of Agricultural Technology, College of Agriculture Gujiba, Yobe State, Nigeria. 27. ABSTRACT: The study was carried-out on resource use efficiency in rice production in Jere Local. Government Area of Borno State, Nigeria. Data were obtained ...

  16. Resource use Efficiency in Sweet Potato Production in Odeda Local ...

    African Journals Online (AJOL)

    ABSTRACT: This study estimated the resource use efficiency in sweet potato production in Odeda Local. Government Area, Ogun State. The study was based on primary data collected from 82 sweet potato farmers through multistage sampling procedure; analyzed using descriptive statistics and multiple regression analysis ...

  17. Efficiency, Effectiveness and Productivity: The Abstract Measures of ...

    African Journals Online (AJOL)

    This paper makes a case for reviving the system. Efficiency, effectiveness and productivity which are all quality indices are carefully discussed and synthesized into management techniques that will create in the staff and management officials the culture of excellent performance in our higher educational system.

  18. A Miniature Recording Cardiotachometer

    DEFF Research Database (Denmark)

    Zsombor-Murray, Paul J; Vroomen, Louis J.; Hendriksen, Nils Thedin

    1981-01-01

    The design of a miniature, recording cardiotachometer is described. It is simple and can store digital data. Bench and field tests, using a hand-held display, are presented. Construction and principles of operation are discussed. Applications, with performing athlete subjects, are outlined....

  19. 75 FR 32177 - Energy Efficiency Program for Consumer Products: Commonwealth of Massachusetts Petition for...

    Science.gov (United States)

    2010-06-07

    ... of Energy Efficiency and Renewable Energy Energy Efficiency Program for Consumer Products... Efficiency Standard for Residential Non- Weatherized Gas Furnaces AGENCY: Office of Energy Efficiency and... Commonwealth of Massachusetts seeking an exemption from Federal preemption of certain energy efficiency...

  20. Productive efficiency of rural health clinics: the Midwest experience.

    Science.gov (United States)

    Sinay, T

    2001-01-01

    This article identifies the characteristics of efficient and inefficient rural clinics in the Midwest, using 1994 Medicare cost reports. Rural health clinics are compared on the basis of productive efficiency by estimating a nonparametric frontier. Six inputs and five output categories were employed to estimate an efficient frontier. The results show that an efficient clinic, on average, employs approximately 1.5 more physicians than an inefficient clinic and incurs capital expenses more than twice those of the inefficient clinic. Future rural clinics are expected to be larger, employing more capital and labor to take advantage of scale economies. However, given the steady (or decreasing) population of rural communities, the expansion of relatively small rural clinics could involve forming rural health care systems and/or networks in close proximity to create synergies from scale economies, staff recruitment, easier access to capital, shared information systems, improved mobility of physicians among several clinics and savings from management costs.

  1. Optimization of light use efficiency for biofuel production in algae.

    Science.gov (United States)

    Simionato, Diana; Basso, Stefania; Giacometti, Giorgio M; Morosinotto, Tomas

    2013-12-01

    A major challenge for next decades is development of competitive renewable energy sources, highly needed to compensate fossil fuels reserves and reduce greenhouse gas emissions. Among different possibilities, which are currently under investigation, there is the exploitation of unicellular algae for production of biofuels and biodiesel in particular. Some algae species have the ability of accumulating large amount of lipids within their cells which can be exploited as feedstock for the production of biodiesel. Strong research efforts are however still needed to fulfill this potential and optimize cultivation systems and biomass harvesting. Light provides the energy supporting algae growth and available radiation must be exploited with the highest possible efficiency to optimize productivity and make microalgae large scale cultivation energetically and economically sustainable. Investigation of the molecular bases influencing light use efficiency is thus seminal for the success of this biotechnology. In this work factors influencing light use efficiency in algal biomass production are reviewed, focusing on how algae genetic engineering and control of light environment within photobioreactors can improve the productivity of large scale cultivation systems. © 2013.

  2. Attached cultivation technology of microalgae for efficient biomass feedstock production.

    Science.gov (United States)

    Liu, Tianzhong; Wang, Junfeng; Hu, Qiang; Cheng, Pengfei; Ji, Bei; Liu, Jinli; Chen, Yu; Zhang, Wei; Chen, Xiaoling; Chen, Lin; Gao, Lili; Ji, Chunli; Wang, Hui

    2013-01-01

    The potential of microalgae biofuel has not been realized because of low productivity and high costs associated with the current cultivation systems. In this paper, an attached cultivation method was introduced, in which microalgae cells grew on the surface of vertical artificial supporting material to form algal film. Multiple of the algal films were assembled in an array fashion to dilute solar irradiation to facilitate high photosynthetic efficiency. Results showed that a broad range of microalgae species can grow with this attached method. A biomass productivity of 50-80 g m(-2) d(-1) was obtained outdoors for Scenedesmus obliquus, corresponding to the photosynthetic efficiency of 5.2-8.3% (total solar radiation). This attached method also offers lots of possible advantages over traditional open ponds, such as on water saving, harvesting, contamination controlling and scale-up. The attached cultivation represents a promising technology for economically viable production of microalgae biofuels. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Challenges in biobutanol production: How to improve the efficiency?

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Veronica; Paekkilae, Johanna; Muurinen, Esa; Keiski, Riitta L. [Mass and Heat Transfer Process Laboratory, Department of Process and Environmental Engineering, POB 4300, FI-90014 University of Oulu, Oulu (Finland); Ojamo, Heikki [Bioprocess Engineering Laboratory, Department of Process and Environmental Engineering, POB 4300, FI-90014 University of Oulu, Oulu (Finland)

    2011-02-15

    There is an increasing interest in the production of chemicals and fuels from renewable resources due to the continuing price increase of fossil resources, the insecurity of the availability of fossil resources in the future, and additionally environmental concerns and legislations. Biobutanol may be produced by the acetone-butanol-ethanol (ABE) fermentation. This paper reviews the biobutanol production bringing up the problems and challenges to overcome. The aim of the paper is to help in finding opportunities to make the process feasible in the near future. The analysis stresses the idea of improving the efficiency of the fermentation stage by altering the up (pretreatment of the raw material) and downstream (product recovery and purification) processes. The paper also explores the biobutanol production from the biorefinery perspective. Finally the review brings up the important role of research in developing and implementing the production of biobutanol by the ABE fermentation. (author)

  4. Scaling production and improving efficiency in DEA: an interactive approach

    Science.gov (United States)

    Rödder, Wilhelm; Kleine, Andreas; Dellnitz, Andreas

    2017-10-01

    DEA models help a DMU to detect its (in-)efficiency and to improve activities, if necessary. Efficiency is only one economic aim for a decision-maker; however, up- or downsizing might be a second one. Improving efficiency is the main topic in DEA; the long-term strategy towards the right production size should attract our attention as well. Not always the management of a DMU primarily focuses on technical efficiency but rather is interested in gaining scale effects. In this paper, a formula for returns to scale (RTS) is developed, and this formula is even applicable for interior points of technology. Particularly, technical and scale inefficient DMUs need sophisticated instruments to improve their situation. Considering RTS as well as efficiency, in this paper, we give an advice for each DMU to find an economically reliable path from its actual situation to better activities and finally to most productive scale size (mpss), perhaps. For realizing this path, we propose an interactive algorithm, thus harmonizing the scientific findings and the interests of the management. Small numerical examples illustrate such paths for selected DMUs; an empirical application in theatre management completes the contribution.

  5. Efficiency and economics in cotton production of Bangladesh

    Directory of Open Access Journals (Sweden)

    Jaba Rani Sarker

    2016-12-01

    Full Text Available Bangladesh is one of the most prominent and promising garments producing and exporting country in the world. At present it uses approximately 6 million bales cotton for its textile and garments industry. But cotton production is much lower than the volume required in the textile and garments industries. The inadequate production of cotton results in poor backward linkage to the ever-flourishing garments sector coupled with high import bill payment. The present study was conducted to determine the technical, allocative, and cost efficiencies of cotton farmers in Bangladesh. Data envelopment analysis was used to determine efficiencies while tobit regression was applied to determine factors affecting efficiencies. Mean CRS TE was 83.6% while VRS TE was estimated at 89.1%. Allocative, cost and scale efficiencies were 78.1%, 69.7% and 93.9% respectively. Seventy five percent cotton farms exhibited increasing returns to scale while only 10 percent and 14 percent displayed evidence of decreasing and constant returns to scale. Experience, number of working adult person, access to credit, extension service and size of cotton cultivated land were the significant factors determining technical efficiencies.

  6. ECONOMIC EFFICIENCY OF DIFFERENT PROTECTION TREATMENTS IN APPLE PRODUCTION

    Directory of Open Access Journals (Sweden)

    Vesna Tomaš

    2015-06-01

    Full Text Available Apple is the most represented fruit species in Croatia. Codling moth, Cydia pomonella L, is one of the most important apple pests whose population is growing from year to year. The aim of this study was to determine the economic effectiveness of four treatments against codling moth (1 - based on baculovirus; 2 - based on the group of synthetic pyrethroid; 3 - based on kaolin, 4 - control treatment, on the three apple varieties. The experiment was performed at the Agricultural Institute Osijek, Croatia, during three years (2012-2014. In order to analyze the results of apple production it was necessary to calculate production efficiency, labor productivity, and profitability of production. The results of the research of economic efficiency according to market prices treatment 1 and treatment 2 had economic coefficient above 1 with tendency of significant growth, while treatment 3 and 4 were uneconomical. The treatment 1showed advantage over the treatment 2 because of its positive effects on human health and biodiversity, as well as satisfactory economic efficiency.

  7. Energy Efficiency and Productivity Enhancement of Microbial Electrosynthesis of Acetate

    Directory of Open Access Journals (Sweden)

    Edward V. LaBelle

    2017-05-01

    Full Text Available It was hypothesized that a lack of acetogenic biomass (biocatalyst at the cathode of a microbial electrosynthesis system, due to electron and nutrient limitations, has prevented further improvement in acetate productivity and efficiency. In order to increase the biomass at the cathode and thereby performance, a bioelectrochemical system with this acetogenic community was operated under galvanostatic control and continuous media flow through a reticulated vitreous carbon (RVC foam cathode. The combination of galvanostatic control and the high surface area cathode reduced the electron limitation and the continuous flow overcame the nutrient limitation while avoiding the accumulation of products and potential inhibitors. These conditions were set with the intention of operating the biocathode through the production of H2. Biofilm growth occurred on and within the unmodified RVC foam regardless of vigorous H2 generation on the cathode surface. A maximum volumetric rate or space time yield for acetate production of 0.78 g/Lcatholyte/h was achieved with 8 A/Lcatholyte (83.3 A/m2projected surface area of cathode supplied to the continuous flow/culture bioelectrochemical reactors. The total Coulombic efficiency in H2 and acetate ranged from approximately 80–100%, with a maximum of 35% in acetate. The overall energy efficiency ranged from approximately 35–42% with a maximum to acetate of 12%.

  8. Considerations for higher efficiency and productivity in research activities.

    Science.gov (United States)

    Forero, Diego A; Moore, Jason H

    2016-01-01

    There are several factors that are known to affect research productivity; some of them imply the need for large financial investments and others are related to work styles. There are some articles that provide suggestions for early career scientists (PhD students and postdocs) but few publications are oriented to professors about scientific leadership. As academic mentoring might be useful at all levels of experience, in this note we suggest several key considerations for higher efficiency and productivity in academic and research activities. More research is needed into the main work style features that differentiate highly productive scientists and research groups, as some of them could be innate and others could be transferable. As funding agencies, universities and research centers invest large amounts of money in order to have a better scientific productivity, a deeper understanding of these factors will be of high academic and societal impact.

  9. Biotechnological approach towards a highly efficient production of natural prostaglandins.

    Science.gov (United States)

    Guder, J C; Buchhaupt, M; Huth, I; Hannappel, A; Ferreirós, N; Geisslinger, G; Schrader, J

    2014-11-01

    Prostaglandins (PGs) act as potent local hormones in nearly all tissues of the human body and are used for various medical applications. Heterologous expression of PG endoperoxide H-synthase from the alga, Gracilaria vermiculophylla, into E. coli and the application of this strain in biotransformation experiments resulted in a highly efficient conversion of arachidonic acid (ARA) yielding up to 130 mg natural PGs l(-1) in a laboratory scale approach. Detailed analyses of the products and production kinetics were performed, confirming a rapid conversion of ARA to PGs.

  10. Miniaturized Environmental Monitoring Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    C. B. Freidhoff

    1997-09-01

    The objective of the Mass Spectrograph on a Chip (MSOC) program is the development of a miniature, multi-species gas sensor fabricated using silicon micromachining technology which will be orders of magnitude smaller and lower power consumption than a conventional mass spectrometer. The sensing and discrimination of this gas sensor are based on an ionic mass spectrograph, using magnetic and/or electrostatic fields. The fields cause a spatial separation of the ions according to their respective mass-to-charge ratio. The fabrication of this device involves the combination of microelectronics with micromechanically built sensors and, ultimately, vacuum pumps. The prototype of a chemical sensor would revolutionize the method of performing environmental monitoring for both commercial and government applications. The portable unit decided upon was the miniaturized gas chromatograph with a mass spectrometer detector, referred to as a GC/MS in the analytical marketplace.

  11. Miniature mass analyzer

    CERN Document Server

    Cuna, C; Lupsa, N; Cuna, S; Tuzson, B

    2003-01-01

    The paper presents the concept of different mass analyzers that were specifically designed as small dimension instruments able to detect with great sensitivity and accuracy the main environmental pollutants. The mass spectrometers are very suited instrument for chemical and isotopic analysis, needed in environmental surveillance. Usually, this is done by sampling the soil, air or water followed by laboratory analysis. To avoid drawbacks caused by sample alteration during the sampling process and transport, the 'in situ' analysis is preferred. Theoretically, any type of mass analyzer can be miniaturized, but some are more appropriate than others. Quadrupole mass filter and trap, magnetic sector, time-of-flight and ion cyclotron mass analyzers can be successfully shrunk, for each of them some performances being sacrificed but we must know which parameters are necessary to be kept unchanged. To satisfy the miniaturization criteria of the analyzer, it is necessary to use asymmetrical geometries, with ion beam obl...

  12. High flux zeolite membranes for efficient production of biofuels

    OpenAIRE

    Sandström, Linda

    2012-01-01

    The greenhouse effect and the limited fossil oil resources have increased the demand for renewable fuels. Zeolite membranes have potential applications in numerous separation processes, and could be useful in the development of efficient processes for renewable fuel production.Synthesis gas is a gas mixture containing mainly carbon monoxide, hydrogen and carbon dioxide. Synthesis gas produced from biomass usually contains more carbon dioxide than desired, and it also contains hydrogen sulphid...

  13. Miniaturized photoacoustic spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Okandan, Murat; Robinson, Alex; Nielson, Gregory N.; Resnick, Paul J.

    2016-08-09

    A low-power miniaturized photoacoustic sensor uses an optical microphone made by semiconductor fabrication techniques, and optionally allows for all-optical communication to and from the sensor. This allows integration of the photoacoustic sensor into systems with special requirements, such as those that would be reactive in an electrical discharge condition. The photoacoustic sensor can also be operated in various other modes with wide application flexibility.

  14. Miniaturizing RFID for magnamosis.

    Science.gov (United States)

    Jiang, Hao; Chen, Shijie; Kish, Shad; Loh, Lokkee; Zhang, Junmin; Zhang, Xiaorong; Kwiat, Dillon; Harrison, Michael; Roy, Shuvo

    2014-01-01

    Anastomosis is a common surgical procedure using staples or sutures in an open or laparoscopic surgery. A more effective and much less invasive alternative is to apply the mechanical pressure on the tissue over a few days [1]. Since the pressure is produced by the attractive force between two permanent magnets, the procedure is called magnamosis[1]. To ensure the two magnets are perfectly aligned during the surgery, a miniaturized batteryless Radio Frequency IDentification (RFID) tag is developed to wirelessly telemeter the status of a pressure sensitive mechanical switch. Using the multi-layer circular spiral coil design, the diameter of the RFID tag is shrunk to 10, 15, 19 and 27 mm to support the magnamosis for children as well as adults. With the impedance matching network, the operating distance of these four RFID tags are longer than 10 cm in a 20 × 22 cm(2) area, even when the tag's normal direction is 45° off the antenna's normal direction. Measurement results also indicate that there is no noticeable degradation on the operating distance when the tag is immersed in saline or placed next to the rare-earth magnet. The miniaturized RFID tag presented in this paper is able to support the magnamosis and other medical applications that require the miniaturized RFID tag.

  15. Protein efficiency in intensive dairy production: a Swedish example.

    Science.gov (United States)

    Swensson, Christian; Lindmark-Månsson, Helena; Smedman, Annika; Henriksson, Maria; Modin Edman, Anna-Karin

    2017-11-01

    Animal agriculture has been criticised in terms of its sustainability from several perspectives. Ruminants such as dairy cows can transform inedible, low-quality protein in roughage and by-products from the food industry into the high-quality protein found in milk and meat. Evaluation of the protein conversion efficiency of dairy production from a sustainability and resource perspective must be based on the proportion of the animal feed edible to humans. A relevant metric is thus edible feed protein conversion ratio (eFPCR), i.e. human-edible protein output in cow's milk per unit human-edible protein input in feed. In this study, eFPCR was calculated for five regionally adapted and realistic feed rations fed to Swedish dairy cows producing different annual milk yields typical for high-yielding, intensive dairy production. All scenarios except one showed a protein efficiency ratio of >1 for human-edible protein. Thus, depending on the composition of their diet, most Swedish dairy cows can convert human-inedible protein into edible, high-value protein. However, higher milk yield led to a decrease in eFPCR, regardless of diet. Dairy cows in high-yielding, intensive production systems such as those used in Sweden have the capacity to convert low-value inedible protein into high-value edible protein. However, a minor part of the dairy cow diet is edible for humans and this fraction must be minimised to justify dairy production. These results are in line with previous findings on protein conversion efficiency and add scientific input to the debate on sustainable food systems and sustainable diets. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  16. Biohydrogen Production: Strategies to Improve Process Efficiency through Microbial Routes

    Science.gov (United States)

    Chandrasekhar, Kuppam; Lee, Yong-Jik; Lee, Dong-Woo

    2015-01-01

    The current fossil fuel-based generation of energy has led to large-scale industrial development. However, the reliance on fossil fuels leads to the significant depletion of natural resources of buried combustible geologic deposits and to negative effects on the global climate with emissions of greenhouse gases. Accordingly, enormous efforts are directed to transition from fossil fuels to nonpolluting and renewable energy sources. One potential alternative is biohydrogen (H2), a clean energy carrier with high-energy yields; upon the combustion of H2, H2O is the only major by-product. In recent decades, the attractive and renewable characteristics of H2 led us to develop a variety of biological routes for the production of H2. Based on the mode of H2 generation, the biological routes for H2 production are categorized into four groups: photobiological fermentation, anaerobic fermentation, enzymatic and microbial electrolysis, and a combination of these processes. Thus, this review primarily focuses on the evaluation of the biological routes for the production of H2. In particular, we assess the efficiency and feasibility of these bioprocesses with respect to the factors that affect operations, and we delineate the limitations. Additionally, alternative options such as bioaugmentation, multiple process integration, and microbial electrolysis to improve process efficiency are discussed to address industrial-level applications. PMID:25874756

  17. Biohydrogen production: strategies to improve process efficiency through microbial routes.

    Science.gov (United States)

    Chandrasekhar, Kuppam; Lee, Yong-Jik; Lee, Dong-Woo

    2015-04-14

    The current fossil fuel-based generation of energy has led to large-scale industrial development. However, the reliance on fossil fuels leads to the significant depletion of natural resources of buried combustible geologic deposits and to negative effects on the global climate with emissions of greenhouse gases. Accordingly, enormous efforts are directed to transition from fossil fuels to nonpolluting and renewable energy sources. One potential alternative is biohydrogen (H2), a clean energy carrier with high-energy yields; upon the combustion of H2, H2O is the only major by-product. In recent decades, the attractive and renewable characteristics of H2 led us to develop a variety of biological routes for the production of H2. Based on the mode of H2 generation, the biological routes for H2 production are categorized into four groups: photobiological fermentation, anaerobic fermentation, enzymatic and microbial electrolysis, and a combination of these processes. Thus, this review primarily focuses on the evaluation of the biological routes for the production of H2. In particular, we assess the efficiency and feasibility of these bioprocesses with respect to the factors that affect operations, and we delineate the limitations. Additionally, alternative options such as bioaugmentation, multiple process integration, and microbial electrolysis to improve process efficiency are discussed to address industrial-level applications.

  18. Biohydrogen Production: Strategies to Improve Process Efficiency through Microbial Routes

    Directory of Open Access Journals (Sweden)

    Kuppam Chandrasekhar

    2015-04-01

    Full Text Available The current fossil fuel-based generation of energy has led to large-scale industrial development. However, the reliance on fossil fuels leads to the significant depletion of natural resources of buried combustible geologic deposits and to negative effects on the global climate with emissions of greenhouse gases. Accordingly, enormous efforts are directed to transition from fossil fuels to nonpolluting and renewable energy sources. One potential alternative is biohydrogen (H2, a clean energy carrier with high-energy yields; upon the combustion of H2, H2O is the only major by-product. In recent decades, the attractive and renewable characteristics of H2 led us to develop a variety of biological routes for the production of H2. Based on the mode of H2 generation, the biological routes for H2 production are categorized into four groups: photobiological fermentation, anaerobic fermentation, enzymatic and microbial electrolysis, and a combination of these processes. Thus, this review primarily focuses on the evaluation of the biological routes for the production of H2. In particular, we assess the efficiency and feasibility of these bioprocesses with respect to the factors that affect operations, and we delineate the limitations. Additionally, alternative options such as bioaugmentation, multiple process integration, and microbial electrolysis to improve process efficiency are discussed to address industrial-level applications.

  19. Efficient recombinant production of prodigiosin in Pseudomonas putida

    Directory of Open Access Journals (Sweden)

    Andreas eDomröse

    2015-09-01

    Full Text Available Serratia marcescens and several other bacteria produce the red-colored pigment prodigiosin which possesses bioactivities as an antimicrobial, anticancer and immunosuppressive agent. Therefore, there is a great interest to produce this natural compound. Efforts aiming at its biotechnological production have so far largely focused on the original producer and opportunistic human pathogen S. marcescens. Here, we demonstrate efficient prodigiosin production in the heterologous host Pseudomonas putida. Random chromosomal integration of the 21 kb prodigiosin biosynthesis gene cluster of S. marcescens in P. putida KT2440 was employed to construct constitutive prodigiosin production strains. Standard cultivation parameters were optimized such that titers of 94 mg/L culture were obtained upon growth of P. putida at 20 °C using rich medium under high aeration conditions. Subsequently, a novel, fast and effective protocol for prodigiosin extraction and purification was established enabling the straightforward isolation of prodigiosin from P. putida growth medium. In summary, we describe here a highly efficient method for the heterologous biosynthetic production of prodigiosin which may serve as a basis to produce large amounts of this bioactive natural compound and may provide a platform for further in-depth studies of prodiginine biosynthesis.

  20. Testing improvements in the chocolate traceability system: Impact on product recalls and production efficiency

    DEFF Research Database (Denmark)

    Saltini, Rolando; Akkerman, Renzo

    2012-01-01

    hypothetical improvements of the traceability system within the chocolate production system and supply chain and we illustrate the resulting benefits by using a case study. Based on the case study, we quantify the influence of these improvements on production efficiency and recall size in case of a safety...

  1. Electro-extractive fermentation for efficient biohydrogen production.

    Science.gov (United States)

    Redwood, Mark D; Orozco, Rafael L; Majewski, Artur J; Macaskie, Lynne E

    2012-03-01

    Electrodialysis, an electrochemical membrane technique, was found to prolong and enhance the production of biohydrogen and purified organic acids via the anaerobic fermentation of glucose by Escherichia coli. Through the design of a model electrodialysis medium using cationic buffer, pH was precisely controlled electrokinetically, i.e. by the regulated extraction of acidic products with coulombic efficiencies of organic acid recovery in the range 50-70% maintained over continuous 30-day experiments. Contrary to previous reports, E. coli produced H(2) after aerobic growth in minimal medium without inducers and with a mixture of organic acids dominated by butyrate. The selective separation of organic acids from fermentation provides a potential nitrogen-free carbon source for further biohydrogen production in a parallel photofermentation. A parallel study incorporated this fermentation system into an integrated biohydrogen refinery (IBR) for the conversion of organic waste to hydrogen and energy. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. High efficiency power production from biomass and waste

    Energy Technology Data Exchange (ETDEWEB)

    Rabou, L.P.L.M.; Van Leijenhorst, R.J.C.; Hazewinkel, J.H.O. [ECN Biomass, Coal and Environment, Petten (Netherlands)

    2008-11-15

    Two-stage gasification allows power production from biomass and waste with high efficiency. The process involves pyrolysis at about 550C followed by heating of the pyrolysis gas to about 1300C in order to crack hydrocarbons and obtain syngas, a mixture of H2, CO, H2O and CO2. The second stage produces soot as unwanted by-product. Experimental results are reported on the suppression of soot formation in the second stage for two different fuels: beech wood pellets and Rofire pellets, made from rejects of paper recycling. Syngas obtained from these two fuels and from an industrial waste fuel has been cleaned and fed to a commercial SOFC stack for 250 hours in total. The SOFC stack showed comparable performance on real and synthetic syngas and no signs of accelerated degradation in performance over these tests. The experimental results have been used for the design and analysis of a future 25 MWth demonstration plant. As an alternative, a 2.6 MWth system was considered which uses the Green MoDem approach to convert waste fuel into bio-oil and syngas. The 25 MWth system can reach high efficiency only if char produced in the pyrolysis step is converted into additional syngas by steam gasification, and if SOFC off-gas and system waste heat are used in a steam bottoming cycle for additional power production. A net electrical efficiency of 38% is predicted. In addition, heat can be delivered with 37% efficiency. The 2.6 MWth system with only a dual fuel engine to burn bio-oil and syngas promises nearly 40% electrical efficiency plus 41% efficiency for heat production. If syngas is fed to an SOFC system and off-gas and bio-oil to a dual fuel engine, the electrical efficiency can rise to 45%. However, the efficiency for heat production drops to 15%, as waste heat from the SOFC system cannot be used effectively. The economic analysis makes clear that at -20 euro/tonne fuel, 70 euro/MWh for electricity and 7 euro/GJ for heat the 25 MWth system is not economically viable at the

  3. A miniaturized laser illumination module

    Science.gov (United States)

    Winzer, A. T.; Freitag, J.; Dannberg, P.; Hintz, M.; Schädel, M.; Sandhya, V.; Freitag, H.-J.

    2015-09-01

    We present a wafer-based technology for mass production of miniaturized laser units. Heart of the approach is a glass wafer, comprising a metal structure acting as electrical contact, optical aperture and mechanical carrier of up to several thousands of flipped surface emitting laser diodes on one side, and a polymer-on-glass micro optical array on the other side. Mounting and characterization methods performed on wafer level are presented. After separation the size of a single laser unit is as small as 640 x 700 x 1400 μm3 and achieves spot diameters below 1 mm at distance of 120 mm. Performance and excellent cost potential allows for application in optical micro sensors and consumer electronics.

  4. Exergy and Its Efficiency Calculations in Ferrochrome Production

    Science.gov (United States)

    Ramakrishna, G.; Kadrolkar, Ameya; Srikakulapu, N. Gurulaxmi

    2015-04-01

    Ferrochrome production is a high energy intensive process consuming around 3000 to 3500 kWh/t of electrical energy. Ferrochrome is produced by smelting of different grades of chromite ore with coke and fluxing agents such as lime, dolomite, and quartz in a submerged arc furnace (SAF). Apart from the production of ferrochrome, co-products that are produced during the process include carbon monoxide rich off-gas and slag. The slag is cooled with high pressure jet water which results in the formation of slag granules. In the present practice, off-gas generated from the SAF is used for ladle preheating, as fuel in sinter plant, while the remaining is unutilized. Approximately 34 to 40 pct of heat from off-gas is utilized, while the remaining 60 to 66 pct of the off-gas can be utilized for generating electricity by gas combustion turbine. The concept of exergy is applied to monitor the existing process and to understand the feasibility of modification. In the present study, comparison of exergy efficiency for existing process and two adapted case studies has been performed, involving utilization of off-gas for sintering and power generation and waste heat utilization from dry slag granulation. It is observed that there was considerable increase in exergy efficiency for waste heat utilization by dry granulation case study when compared with other two case studies.

  5. Miniature Ground Mapping LADAR Project

    Data.gov (United States)

    National Aeronautics and Space Administration — System & Processes Engineering Corporation (SPEC) proposes a miniature solid state surface imaging LADAR, for imaging the landing areas providing precision...

  6. Exergy-based efficiency and renewability assessment of biofuel production.

    Science.gov (United States)

    Dewulf, J; Van Langenhove, H; Van De Velde, B

    2005-05-15

    This study presents an efficiency and renewability analysis of the production of three biofuels: rapeseed methyl ester (RME), soybean methyl ester (SME) and corn-based ethanol (EtOH). The overall production chains have been taken into account: not only the agricultural crop production and the industrial conversion into biofuel, but also production of the supply of agricultural resources (pesticides, fertilizers, fuel, seeding material) and industrial resources (energy and chemicals) to transform the crops into biofuel. Simultaneously, byproducts of the agricultural and industrial processes have been taken into account when resources have to be allocated to the biofuels. The technical analysis via the second law of thermodynamics revealed that corn-based EtOH results in the highest production rate with an exergetic fuel content of 68.8 GJ ha(-1) yr(-1), whereas the RME and SME results were limited to 47.5 and 16.4 GJ ha(-1) yr(-1). The allocated nonrenewable resource input to deliver these biofuels is significant: 16.5, 15.4, and 5.6 MJ ha(-1) yr(-1). This means that these biofuels, generally considered as renewable resources, embed a nonrenewable fraction of one-quarter for EtOH and even one-third for RME and SME. This type of analysis provides scientifically sound quantitative information that is necessarywith respect to the sustainability analysis of so-called renewable energy.

  7. Efficient production of automotive biofuels; Effektiv produktion av biodrivmedel

    Energy Technology Data Exchange (ETDEWEB)

    Gode, Jenny; Hagberg, Linus; Rydberg, Tomas; Raadberg, Henrik; Saernholm, Erik

    2008-07-01

    , production of fatty acid methyl ester (FAME), pellets production and in some cases treatment with hydrogen gas, catalytic depolymerisation and anaerobic digestion can increase the use of steam and heat from district heating. This new 'offset' for heat can increase operational hours for the CHP. Conversely, biomass gasification produces a greater proportion of the necessary process energy internally and the waste heat produced in the process leads to a lower load for heat production in the CHP. These conclusions are illustrated in the form of a diagram of heat output distribution, both for the hypothetical polygeneration plant of ethanol production and for the hypothetical biomass gasification polygeneration plant with production of synthetic natural gas. The calculations are based on a district heating network where the heat is produced from a biofuel driven CHP (89 MW{sub e}, 173 MW{sub heat} and 230 MW{sub fuel}) and a biofuel driven HP. Since the prerequisites for each specific polygeneration plant are different, the effect of integrations in reality would differ from the results of these calculations--but the results give an overview of the consequences of the choice of energy polygeneration plant. Several interesting combinations in the form of biofuel polygeneration plants are already in operation or in the planning stage. Several conceivable alternatives are: - Ethanol production, anaerobic digestion/feed production, heat and power. - Ethanol production, pellets production, greenhouse, heat and power. - Gasification including fuel production, district heating network and pellets production. - Oilseed rape production, RME production, heat and power. - NExBTL production, refinery, district heating network/heat and power. In most cases the overall efficiency of biofuel production is lower than if biomass is used directly in heat and power production as shown in the system analysis. This is, however, in conflict with the increasing demand for biofuels. A biomass

  8. MER2 MARS MINIATURE THERMAL EMISSION SPECTROMETER EMR V1.0

    Data.gov (United States)

    National Aeronautics and Space Administration — This archive contains Mars Exploration Rover Miniature Thermal Emission Spectrometer (Mini-TES) Emissivity Reduced Data Record (EMR) products and ancillary files....

  9. MER1 MARS MINIATURE THERMAL EMISSION SPECTROMETER BTR V1.0

    Data.gov (United States)

    National Aeronautics and Space Administration — This archive contains Mars Exploration Rover Miniature Thermal Emission Spectrometer (Mini-TES) Brightness Temperature Reduced Data Record (BTR) products and...

  10. Energy-efficient photobioreactor configuration for algal biomass production.

    Science.gov (United States)

    Pegallapati, Ambica Koushik; Arudchelvam, Yalini; Nirmalakhandan, Nagamany

    2012-12-01

    An internally illuminated photobioreactor (IIPBR) design is proposed for energy-efficient biomass production. Theoretical rationale of the IIPBR design and its advantages over the traditional bubble column photobioreactors (PBRs) are presented, followed by experimental results from prototype scale cultivation of freshwater and marine algal strains in an 18L IIPBR. Based on theoretical considerations, the proposed IIPBR design has the potential to support 160% higher biomass density and higher biomass productivity per unit energy input, B/E, than a bubble column PBR of equal incident area per unit culture volume. Experimental B/E values recorded in this study with fresh water algae and marine algae (1.42 and 0.37 gW(-1)d(-1), respectively) are at least twice as those reported in the literature for comparable species cultivated in bubble column and airlift PBRs. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Factors Affecting the Efficient Production of Boar Sperm.

    Science.gov (United States)

    Flowers, W L

    2015-07-01

    Efficient sperm production in boars has developmental and functional components. Factors affecting the developmental phase influence Sertoli cell mitosis, appear to be mostly stimulatory and have permanent effects on production of sperm. Birthweight appears to hold promise as a prospective screening tool as it appears to have a strong positive relationship with adult sperm production. Strategic cross-fostering shortly after birth and socialization to humans between 4 and 9 weeks of age are strategies during the developmental phase that have been shown to increase spermatogenesis in adults. Factors affecting the functional phase influence the release of sperm by Sertoli cells and their subsequent maturation in the epididymi, appear to be mainly inhibitory and have temporary effects on spermatogenesis which can be corrected. The most common of these include exposure to elevated ambient temperature, nutrition, photoperiod, collection frequency and housing. Multiple deficiencies in several of these areas are common in commercial studs and have additive, negative effects on sperm production. However, there also is evidence that enhancements in one of these areas may be capable of offsetting deficiencies in others. © 2015 Blackwell Verlag GmbH.

  12. ANALYSIS OF MILK PRODUCTION AND ECONOMIC EFFICIENCY IN DAIY FARMS

    Directory of Open Access Journals (Sweden)

    AGATHA POPESCU

    2009-05-01

    Full Text Available The paper aimed to present some aspects regarding milk production and farm size and their relationship to economic efficiency in dairy farming. For this purpose, three variants of hers size have been taken into consideration as follows: F1– raising 12 dairy cows whose milk yield is 3,500 kg /cow/lactation; F2- raising 50 dairy cows whose milk yield is 5,000 kg /cow and year and F3 – rearing 150 dairy cows, producing 6,000 kg milk per cow/year. For each variant, the following economic parameters have been determined: gross product, variable costs, fixed costs, gross margin, gross and net profit, profit rate and other specific indicators of economic efficiency such as: milk yield, milk cost, cost /cow/year, profit/cow, profit rate /cow, income /cow, profit/farm and profit rate at farm level. In conclusion, the higher the farm size and milk yield, the higher gross margin, net profit and profit rate

  13. DEPENDENCE OF ENERGY EFFICIENCY AND COST OF PRODUCTION

    Directory of Open Access Journals (Sweden)

    D. Sklyarov

    2016-01-01

    Full Text Available Economic systems exist on condition of receipt and spending of energy. Energy consumption is a necessary condition for the existence and functioning of the economic systems of any scale: macroeconomics, microeconomics, regional economy or the world economy.The economic system operates on the scale at which it is able to produce energy and get access to energy. Moreover, receipt and consumption of energy in the operation of the economic system is mainly determined by, the level of energy production from energy sources, since this level is determined by the level of energy consumption by industries and enterprises of the economy.Currently, the economic system does not produce energy in reserve. Thus, the question of energy effi ciency and energy saving was always acute.The article describes the energy efficiency and energy saving effect on the cost of production. Were used two methods: “costs and release” matrix and “price - value added” matrix. The result is the equation of dependence of energy efficiency and costs.

  14. Productivity and technical efficiency of suckler beef production systems: trends for the period 1990 to 2012.

    Science.gov (United States)

    Veysset, P; Lherm, M; Roulenc, M; Troquier, C; Bébin, D

    2015-12-01

    Over the past 23 years (1990 to 2012), French beef cattle farms have expanded in size and increased labour productivity by over 60%, chiefly, though not exclusively, through capital intensification (labour-capital substitution) and simplifying herd feeding practices (more concentrates used). The technical efficiency of beef sector production systems, as measured by the ratio of the volume value (in constant euros) of farm output excluding aids to volume of intermediate consumption, has fallen by nearly 20% while income per worker has held stable thanks to subsidies and the labour productivity gains made. This aggregate technical efficiency of beef cattle systems is positively correlated to feed self-sufficiency, which is in turn negatively correlated to farm and herd size. While volume of farm output per hectare of agricultural area has not changed, forage feed self-sufficiency decreased by 6 percentage points. The continual increase in farm size and labour productivity has come at a cost of lower production-system efficiency - a loss of technical efficiency that 20 years of genetic, technical, technological and knowledge-driven progress has barely managed to offset.

  15. Improving water resources management efficiency for cranberry production

    Science.gov (United States)

    Rousseau, A. N.; Bigah, Y.; Gumiere, S.

    2016-12-01

    Water needs vary significantly from one plant to another and unlike many other plants cranberry is a very sensitive to weather conditions. This inherent sensitivity requires irrigation for protection against frost and excessive heat when the air temperature falls below 0o C and rises above 25o C, respectively. In addition, cranberry fields require significant amount of water as fields require about 406 mm of water to ease the harvesting process. Lastly, fields need icing for protection during winter months and that requires maintaining almost 203 mm of water above cranberry plants for at least three consecutive days. The intensive use of water for cranberry production has triggered several water management projects, particularly in Canada, the second largest producer in the world. The outcomes of these projects have improved water management to a point where nowadays most cranberry farms recycle water in a closed circuit during the production cycle, especially during the harvesting and icing phases. However, up till now very little effort had been put into assessing the efficiency of the recycling system such that a question remained: how much does a closed circuit system contribute to reducing the annual water use? The objective of this project is to assess water use for cranberry production and associated management efficiency of two different recycling systems located within watersheds under slightly different climatic conditions. The methodological approach is based on the development of a mathematical model capable of simulating water needs for a wide range of climatic conditions and over an extended period of time (e.g., 30 years). The outcome of this project has potential to further improve our understanding of the inter-annual dynamics of water needs and supply and ultimately improved recycling systems.

  16. Separating environmental efficiency into production and abatement efficiency. A nonparametric model with application to U.S. power plants

    Energy Technology Data Exchange (ETDEWEB)

    Hampf, Benjamin

    2011-08-15

    In this paper we present a new approach to evaluate the environmental efficiency of decision making units. We propose a model that describes a two-stage process consisting of a production and an end-of-pipe abatement stage with the environmental efficiency being determined by the efficiency of both stages. Taking the dependencies between the two stages into account, we show how nonparametric methods can be used to measure environmental efficiency and to decompose it into production and abatement efficiency. For an empirical illustration we apply our model to an analysis of U.S. power plants.

  17. Analysis of resource efficiency: a production frontier approach.

    Science.gov (United States)

    Hoang, Viet-Ngu

    2014-05-01

    This article integrates the material/energy flow analysis into a production frontier framework to quantify resource efficiency (RE). The emergy content of natural resources instead of their mass content is used to construct aggregate inputs. Using the production frontier approach, aggregate inputs will be optimised relative to given output quantities to derive RE measures. This framework is superior to existing RE indicators currently used in the literature. Using the exergy/emergy content in constructing aggregate material or energy flows overcomes a criticism that mass content cannot be used to capture different quality of differing types of resources. Derived RE measures are both 'qualitative' and 'quantitative', whereas existing RE indicators are only qualitative. An empirical examination into the RE of 116 economies was undertaken to illustrate the practical applicability of the new framework. The results showed that economies, on average, could reduce the consumption of resources by more than 30% without any reduction in per capita gross domestic product (GDP). This calculation occurred after adjustments for differences in the purchasing power of national currencies. The existence of high variations in RE across economies was found to be positively correlated with participation of people in labour force, population density, urbanisation, and GDP growth over the past five years. The results also showed that economies of a higher income group achieved higher RE, and those economies that are more dependent on imports and primary industries would have lower RE performance. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Using a Polytope to Estimate Efficient Production Functions of Joint Product Processes.

    Science.gov (United States)

    Simpson, William A.

    In the last decade, a modeling technique has been developed to handle complex input/output analyses where outputs involve joint products and there are no known mathematical relationships linking the outputs or inputs. The technique uses the geometrical concept of a six-dimensional shape called a polytope to analyze the efficiency of each…

  19. Miniature cryocooler developments for high operating temperatures at Thales Cryogenics

    Science.gov (United States)

    Arts, R.; Martin, J.-Y.; Willems, D.; Seguineau, C.; Van Acker, S.; Mullié, J. C.; Göbel, A.; Tops, M.; Le Bordays, J.; Etchanchu, T.; Benschop, A. A. J.

    2015-05-01

    In recent years there has been a drive towards miniaturized cooled IDCA solutions for low-power, low-mass, low-size products (SWaP). To support this drive, coolers are developed optimized for high-temperature, low heat load dewar-detector assemblies. In this paper, Thales Cryogenics development activities supporting SWaP are presented. Design choices are discussed and compared to various key requirements. Trade-off analysis results are presented on drive voltage, cold finger definition (length, material, diameter and sealing concept), and other interface considerations, including cold finger definition. In parallel with linear and rotary cooler options, designs for small-size high-efficiency drive electronics based on state-of-the-art architectures are presented.

  20. Energy Efficiency as a Factor of Engineering Product Competitiveness and its Formation on Product Economic Life Cycle Stages

    Directory of Open Access Journals (Sweden)

    Ivan V. Evstratov

    2011-11-01

    Full Text Available This article discusses the concept of energy efficiency of enterprises and engineering products. The author research how energy efficiency effect on engineering product competitiveness and how rate of enterprise and engineering product formation on stages of the economic product life cycle.

  1. Naturally Efficient Emitters: Luminescent Organometallic Complexes Derived from Natural Products

    Science.gov (United States)

    Zhang, Wen-Hua; Young, David J.

    2013-08-01

    Naturally occurring molecules offer intricate structures and functionality that are the basis of modern medicinal chemistry, but are under-represented in materials science. Herein, we review recent literature describing the use of abundant and relatively inexpensive, natural products for the synthesis of ligands for luminescent organometallic complexes used for organic light emitting diodes (OLEDs) and related technologies. These ligands are prepared from the renewable starting materials caffeine, camphor, pinene and cinchonine and, with the exception of caffeine, impart performance improvements to the emissive metal complexes and resulting OLED devices, with emission wavelengths that span the visible spectrum from blue to red. The advantages of these biologically-derived molecules include improved solution processibility and phase homogeneity, brighter luminescence, higher quantum efficiencies and lower turn-on voltages. While nature has evolved these carbon-skeletons for specific purposes, they also offer some intriguing benefits in materials science and technology.

  2. Thin Film Packaging Solutions for High Efficiency OLED Lighting Products

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-06-30

    The objective of the 'Thin Film Packaging Solutions for High Efficiency OLED Lighting Products' project is to demonstrate thin film packaging solutions based on SiC hermetic coatings that, when applied to glass and plastic substrates, support OLED lighting devices by providing longer life with greater efficiency at lower cost than is currently available. Phase I Objective: Demonstrate thin film encapsulated working phosphorescent OLED devices on optical glass with lifetime of 1,000 hour life, CRI greater than 75, and 15 lm/W. Phase II Objective: Demonstrate thin film encapsulated working phosphorescent OLED devices on plastic or glass composite with 25 lm/W, 5,000 hours life, and CRI greater than 80. Phase III Objective: Demonstrate 2 x 2 ft{sup 2} thin film encapsulated working phosphorescent OLED with 40 lm/W, 10,000 hour life, and CRI greater than 85. This report details the efforts of Phase III (Budget Period Three), a fourteen month collaborative effort that focused on optimization of high-efficiency phosphorescent OLED devices and thin-film encapsulation of said devices. The report further details the conclusions and recommendations of the project team that have foundation in all three budget periods for the program. During the conduct of the Thin Film Packaging Solutions for High Efficiency OLED Lighting Products program, including budget period three, the project team completed and delivered the following achievements: (1) a three-year marketing effort that characterized the near-term and longer-term OLED market, identified customer and consumer lighting needs, and suggested prototype product concepts and niche OLED applications lighting that will give rise to broader market acceptance as a source for wide area illumination and energy conservation; (2) a thin film encapsulation technology with a lifetime of nearly 15,000 hours, tested by calcium coupons, while stored at 16 C and 40% relative humidity ('RH'). This encapsulation technology

  3. Evaluation of the efficiency of alternative enzyme production technologies

    Energy Technology Data Exchange (ETDEWEB)

    Albaek, M.O.

    2012-03-15

    Enzymes are used in an increasing number of industries. The application of enzymes is extending into the production of lignocellulosic ethanol in processes that economically can compete with fossil fuels. Since lignocellulosic ethanol is based on renewable resources it will have a positive impact on for example the emission of green house gasses. Cellulases and hemi-cellulases are used for enzymatic hydrolysis of pretreated lignocellulosic biomass, and fermentable sugars are released upon the enzymatic process. Even though many years of research has decreased the amount of enzyme needed in the process, the cost of enzymes is still considered a bottleneck in the economic feasibility of lignocellulose utilization. The purpose of this project was to investigate and compare different technologies for production of these enzymes. The filamentous fungus Trichoderma reesei is currently used for industrial production of cellulases and hemi-cellulases. The aim of the thesis was to use modeling tools to identify alternative technologies that have higher energy or raw material efficiency than the current technology. The enzyme production by T. reesei was conducted as an aerobic fed-batch fermentation. The process was carried out in pilot scale stirred tank reactors and based on a range of different process conditions, a process model was constructed which satisfactory described the course of fermentation. The process was governed by the rate limiting mass transfer of oxygen from the gas to the liquid phase. During fermentation, filamentous growth of the fungus lead to increased viscosity which hindered mass transfer. These mechanisms were described by a viscosity model based on the biomass concentration of the fermentation broth and a mass transfer correlation that incorporated a viscosity term. An analysis of the uncertainty and sensitivity of the model indicated the biological parameters to be responsible for most of the model uncertainty. A number of alternative

  4. Miniature EVA Software Defined Radio

    Science.gov (United States)

    Pozhidaev, Aleksey

    2012-01-01

    As NASA embarks upon developing the Next-Generation Extra Vehicular Activity (EVA) Radio for deep space exploration, the demands on EVA battery life will substantially increase. The number of modes and frequency bands required will continue to grow in order to enable efficient and complex multi-mode operations including communications, navigation, and tracking applications. Whether conducting astronaut excursions, communicating to soldiers, or first responders responding to emergency hazards, NASA has developed an innovative, affordable, miniaturized, power-efficient software defined radio that offers unprecedented power-efficient flexibility. This lightweight, programmable, S-band, multi-service, frequency- agile EVA software defined radio (SDR) supports data, telemetry, voice, and both standard and high-definition video. Features include a modular design, an easily scalable architecture, and the EVA SDR allows for both stationary and mobile battery powered handheld operations. Currently, the radio is equipped with an S-band RF section. However, its scalable architecture can accommodate multiple RF sections simultaneously to cover multiple frequency bands. The EVA SDR also supports multiple network protocols. It currently implements a Hybrid Mesh Network based on the 802.11s open standard protocol. The radio targets RF channel data rates up to 20 Mbps and can be equipped with a real-time operating system (RTOS) that can be switched off for power-aware applications. The EVA SDR's modular design permits implementation of the same hardware at all Network Nodes concept. This approach assures the portability of the same software into any radio in the system. It also brings several benefits to the entire system including reducing system maintenance, system complexity, and development cost.

  5. Efficient production of free fatty acids from soybean meal carbohydrates.

    Science.gov (United States)

    Wang, Dan; Thakker, Chandresh; Liu, Ping; Bennett, George N; San, Ka-Yiu

    2015-11-01

    Conversion of biomass feedstock to chemicals and fuels has attracted increasing attention recently. Soybean meal, containing significant quantities of carbohydrates, is an inexpensive renewable feedstock. Glucose, galactose, and fructose can be obtained by enzymatic hydrolysis of soluble carbohydrates of soybean meal. Free fatty acids (FFAs) are valuable molecules that can be used as precursors for the production of fuels and other value-added chemicals. In this study, free fatty acids were produced by mutant Escherichia coli strains with plasmid pXZ18Z (carrying acyl-ACP thioesterase (TE) and (3R)-hydroxyacyl-ACP dehydratase) using individual sugars, sugar mixtures, and enzymatic hydrolyzed soybean meal extract. For individual sugar fermentations, strain ML211 (MG1655 fadD(-) fabR(-) )/pXZ18Z showed the best performance, which produced 4.22, 3.79, 3.49 g/L free fatty acids on glucose, fructose, and galactose, respectively. While the strain ML211/pXZ18Z performed the best with individual sugars, however, for sugar mixture fermentation, the triple mutant strain XZK211 (MG1655 fadD(-) fabR(-) ptsG(-) )/pXZ18Z with an additional deletion of ptsG encoding the glucose-specific transporter, functioned the best due to relieved catabolite repression. This strain produced approximately 3.18 g/L of fatty acids with a yield of 0.22 g fatty acids/g total sugar. Maximum free fatty acids production of 2.78 g/L with a high yield of 0.21 g/g was achieved using soybean meal extract hydrolysate. The results suggested that soybean meal carbohydrates after enzymatic treatment could serve as an inexpensive feedstock for the efficient production of free fatty acids. © 2015 Wiley Periodicals, Inc.

  6. Crop and soil specific N and P efficiency and productivity in Finland

    Directory of Open Access Journals (Sweden)

    S. BÄCKMAN

    2008-12-01

    Full Text Available This paper estimates a stochastic production frontier based on experimental data of cereals production in Finland over the period 1977-1994. The estimates of the production frontier are used to analyze nitrogen and phosphorous productivity and efficiency differences between soils and crops. For this input specific efficiencies are calculated. The results can be used to recognize relations between fertilizer management and soil types as well as to learn where certain soil types and crop combinations require special attention to fertilization strategy. The combination of inputs as designed by the experiment shows significant inefficiencies for both N and P. The measures of mineral productivity and efficiency indicate that clay is the most mineral efficient and productive soil while silt and organic soils are the least efficient and productive soils. Furthermore, a positive correlation is found between mineral productivity and efficiency. The results indicate that substantial technical efficiency differences between different experiments prevail.;

  7. Computational imaging for miniature cameras

    Science.gov (United States)

    Salahieh, Basel

    Miniature cameras play a key role in numerous imaging applications ranging from endoscopy and metrology inspection devices to smartphones and head-mount acquisition systems. However, due to the physical constraints, the imaging conditions, and the low quality of small optics, their imaging capabilities are limited in terms of the delivered resolution, the acquired depth of field, and the captured dynamic range. Computational imaging jointly addresses the imaging system and the reconstructing algorithms to bypass the traditional limits of optical systems and deliver better restorations for various applications. The scene is encoded into a set of efficient measurements which could then be computationally decoded to output a richer estimate of the scene as compared with the raw images captured by conventional imagers. In this dissertation, three task-based computational imaging techniques are developed to make low-quality miniature cameras capable of delivering realistic high-resolution reconstructions, providing full-focus imaging, and acquiring depth information for high dynamic range objects. For the superresolution task, a non-regularized direct superresolution algorithm is developed to achieve realistic restorations without being penalized by improper assumptions (e.g., optimizers, priors, and regularizers) made in the inverse problem. An adaptive frequency-based filtering scheme is introduced to upper bound the reconstruction errors while still producing more fine details as compared with previous methods under realistic imaging conditions. For the full-focus imaging task, a computational depth-based deconvolution technique is proposed to bring a scene captured by an ordinary fixed-focus camera to a full-focus based on a depth-variant point spread function prior. The ringing artifacts are suppressed on three levels: block tiling to eliminate boundary artifacts, adaptive reference maps to reduce ringing initiated by sharp edges, and block-wise deconvolution or

  8. The Textile Elements in Ottoman Miniatures

    Directory of Open Access Journals (Sweden)

    Kevser Gürcan Y A R D I M C I

    2015-07-01

    Full Text Available With the value given to the art and the artist, high quality works of art in many fields were produced in the Ottoman Era. The art of weaving also lived its brightest period in terms of color, design, and weaving techniques in the Ottoman Empire in XVI. Ce ntury. The weaving products shaped the lifestyles of the people in those times and received great interest in the Palace as well. Silk woven fabrics had become such a great power in those times that it became the greatest symbol showing the power of the Ot toman Empire to the foreigners, and the determiner of the social standing within the society. The Ottoman Sultans used their clothing, which they made to become flamboyant with embroideries, to distinguish themselves from the public, and make them accept t heir power. Among the presents that were presented to the Sultans, clothes, kaftans, and similar fabrics as well as other precious presents, were frequent. The miniature manuscripts that were produced in the Palace are in the quality of unique documents t hat transfer yesterday’s knowledge to the modern age. It is easy to decode the dimensions of the clothing habits, decoration elements and hierarchy concepts of the Ottoman Era, as well as the weaving activities by using the miniature manuscripts. On the ot her hand, these elements constitute a rich alphabet in transferring the emotional structure of the society in those times, the traditions and habits to our world today. The greatest share in this effort belongs to the artists who depicted the miniatures by staying loyal to the texts in the manuscripts as well as to their active participation in the events of those times and their narrating the events as the very first observers. In addition, the muralists depicting the manuscripts and their undertaking the job of drawing the designs on the original fabric helped them to reflect the richness in the design of those times to the miniatures. In this study, the weavings and the accessories

  9. Miniature Laser Magnetometer (MLM) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This 2009 NASA SBIR Phase 2 proposal for an innovative Miniature Laser Magnetometer (MLM) is a response to subtopic S1.06 Particles and Field Sensors and Instrument...

  10. Miniature Laser Magnetometer (MLM) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This 2009 NASA SBIR Phase 1 proposal for an innovative Miniature Laser Magnetometer (MLM) is a response to subtopic S1.06 Particles and Field Sensors and Instrument...

  11. WAYS TO IMPROVE ENERGY EFFICIENCY OF SUGAR PRODUCTION

    Directory of Open Access Journals (Sweden)

    V. A. Golybin

    2014-01-01

    Full Text Available Summary. Food production requires a significant consumption of energy derived from natural resources. The main direction of increase of competitiveness of production of sugar beet and sugar is reduction the consumption of energy resources, losses of sucrose and enforcement of existing environmental regulations. We conducted research on the reduction of energy consumption in obtaining sugar in various directions. We investigate the possibility of reducing energy consumption for drying of sugar beet pulp. One of the directions of hardening of the structure of the fabric during the extraction process is the preliminary chemical impact on beet chips. In our studies, it was found the effect of the method of preparation pulp press water on mechanical strength beet chips. One of the directions of energy saving is the reduction of scale formation and the related increase in the efficiency of water evaporation from the pure juice. With this purpose, we studied the different coating applied to the surface of the boiling tubes evaporating. The best results in reduction of scale formation has been observed when blueing heat transfer surface. Positive results can be obtained from the use of such technological operations as the ripening of juice after II carbonation. We analyzed the technology with the use of magnetic treatment to reduce the consumption of lime on the physical and chemical cleaning of diffusion juice. Determined that the rational conditions of processing preliming juice at pH 8,5 pulsed magnetic field is the duration of its impact 8 sec and with the induction of 0,25 T. A version of the cleanup pulp press water, including adding juice suspension II carbonation, filtering, acidification acid, water treatment in a pulsed magnetic field, filtering. The estimated reduction in fuel consumption for drying pulp - 7 % to the mass of dry beet pulp.

  12. A miniature tactical Rb frequency standard

    Science.gov (United States)

    Kwon, T. M.; Dagle, R.; Debley, W.; Dellamano, H.; Hahn, T.; Horste, J.; Lam, L. K.; Magnuson, R.; Mcclelland, T.

    1984-01-01

    Work on an innovative design for miniature rubidium frequency standards has reached the pre-production demonstration stage at Litton Guidance and Control Systems. Pre-production units were built and tested under contract to the Rome Air Development Center of the U.S. Air Force Systems Command. The units, which are designed for use in tactical military applications, feature fast warm-up, low power consumption, and vibration insensitivity. The output stability under vibration is maintained without the need for external shock-mounts. The design objectives and test results are discussed.

  13. Ozone decreases soybean productivity and water use efficiency

    Science.gov (United States)

    Betzelberger, A. M.; VanLoocke, A. D.; Ainsworth, E. A.; Bernacchi, C. J.

    2011-12-01

    The combination of population growth and climate change will increase pressure on agricultural and water resources throughout this century. An additional consequence of this growth is an increase in anthropogenic emissions that lead to the formation of tropospheric ozone (O3), which in concert with climate change, poses a significant threat to human health and nutrition. In addition to being an important greenhouse gas, O3 reduces plant productivity, an effect that has been particularly pronounced in soybean, which provides over half of the world's oilseed production. Plant productivity is linked to feedbacks in the climate system, indirectly through the carbon cycle, as well as directly through the partitioning of radiation into heat and moisture fluxes. Soybean, along with maize, comprises the largest ecosystem in the contiguous U.S. Therefore, changes in productivity and water use under increasing O3 could impact human nutrition as well as the regional climate. Soybean response to increasing O3 concentrations was tested under open-air agricultural conditions at the SoyFACE research site. During the 2009 growing season, eight 20 m diameter FACE plots were exposed to different O3 concentrations, ranging from 40 to 200 ppb. Canopy growth (leaf area index) and physiological measurements of leaf photosynthesis and stomatal conductance were taken regularly throughout the growing season. Canopy fluxes of heat and moisture were measured using the residual energy balance micrometeorological technique. Our results indicate that as O3 increased from 40 to 200 ppb, rates of photosynthesis and stomatal conductance decreased significantly. Further, the seed yield decreased by over 60%, while water use decreased by 30% and the water-use-efficiency (yield/water-use) declined by 50%. The growing season average canopy temperatures increased by 1°C and midday temperatures increased by 2°C compared to the control. Warmer and drier canopies may result in a positive feedback on O3

  14. Noise in miniature microphones.

    Science.gov (United States)

    Thompson, Stephen C; LoPresti, Janice L; Ring, Eugene M; Nepomuceno, Henry G; Beard, John J; Ballad, William J; Carlson, Elmer V

    2002-02-01

    The internal noise spectrum in miniature electret microphones of the type used in the manufacture of hearing aids is measured. An analogous circuit model of the microphone is empirically fit to the measured data and used to determine the important sources of noise within the microphone. The dominant noise source is found to depend on the frequency. Below 40 Hz and above 9 kHz, the dominant source is electrical noise from the amplifier circuit needed to buffer the electrical signal from the microphone diaphragm. Between approximately 40 Hz and 1 kHz, the dominant source is thermal noise originating in the acoustic flow resistance of the small hole pierced in the diaphragm to equalize barometric pressure. Between approximately 1 kHz and 9 kHz, the noise originates in the acoustic flow resistances of sound entering the microphone and propagating to the diaphragm. To further reduce the microphone internal noise in the audio band requires attacking these sources. A prototype microphone having reduced acoustical noise is measured and discussed.

  15. Miniature Chemical Sensor

    Energy Technology Data Exchange (ETDEWEB)

    Andrew C. R. Pipino

    2004-12-13

    A new chemical detection technology has been realized that addresses DOE environmental management needs. The new technology is based on a variant of the sensitive optical absorption technique, cavity ring-down spectroscopy (CRDS). Termed evanescent-wave cavity ring-down spectroscopy (EW-CRDS), the technology employs a miniature solid-state optical resonator having an extremely high Q-factor as the sensing element, where the high-Q is achieved by using ultra-low-attenuation optical materials, ultra-smooth surfaces, and ultra-high reflectivity coatings, as well as low-diffraction-loss designs. At least one total-internal reflection (TIR) mirror is integral to the resonator permitting the concomitant evanescent wave to probe the ambient environment. Several prototypes have been designed, fabricated, characterized, and applied to chemical detection. Moreover, extensions of the sensing concept have been explored to enhance selectivity, sensitivity, and range of application. Operating primarily in the visible and near IR regions, the technology inherently enables remote detection by optical fiber. Producing 11 archival publications, 5 patents, 19 invited talks, 4 conference proceedings, a CRADA, and a patent-license agreement, the project has realized a new chemical detection technology providing >100 times more sensitivity than comparable technologies, while also providing practical advantages.

  16. Miniaturized LEDs for flat-panel displays

    Science.gov (United States)

    Radauscher, Erich J.; Meitl, Matthew; Prevatte, Carl; Bonafede, Salvatore; Rotzoll, Robert; Gomez, David; Moore, Tanya; Raymond, Brook; Cok, Ronald; Fecioru, Alin; Trindade, António Jose; Fisher, Brent; Goodwin, Scott; Hines, Paul; Melnik, George; Barnhill, Sam; Bower, Christopher A.

    2017-02-01

    Inorganic light emitting diodes (LEDs) serve as bright pixel-level emitters in displays, from indoor/outdoor video walls with pixel sizes ranging from one to thirty millimeters to micro displays with more than one thousand pixels per inch. Pixel sizes that fall between those ranges, roughly 50 to 500 microns, are some of the most commercially significant ones, including flat panel displays used in smart phones, tablets, and televisions. Flat panel displays that use inorganic LEDs as pixel level emitters (μILED displays) can offer levels of brightness, transparency, and functionality that are difficult to achieve with other flat panel technologies. Cost-effective production of μILED displays requires techniques for precisely arranging sparse arrays of extremely miniaturized devices on a panel substrate, such as transfer printing with an elastomer stamp. Here we present lab-scale demonstrations of transfer printed μILED displays and the processes used to make them. Demonstrations include passive matrix μILED displays that use conventional off-the shelf drive ASICs and active matrix μILED displays that use miniaturized pixel-level control circuits from CMOS wafers. We present a discussion of key considerations in the design and fabrication of highly miniaturized emitters for μILED displays.

  17. Productive Efficiency of Small Scale Sawmilling Industries in Mufindi ...

    African Journals Online (AJOL)

    Results showed a mean technical efficiency of 84% (CRS model) and 92% (VRS model), allocative efficiency of 84% (CRS model) and 89% (VRS model) and cost efficiency of 70% (CRS model) and 81 % (VRS model). Furthermore, results from the censored regression model revealed that Owners/manager's education, ...

  18. Environmentally friendly disinfectant: Production, disinfectant action and efficiency

    Directory of Open Access Journals (Sweden)

    Čekerevac Milan I.

    2006-01-01

    Full Text Available Silver is a known disinfectant from ancient times, and it has been widely used for various purposes: for food and water disinfection, curing of wounds and as a universal antibiotic for a wide spectrum of diseases - until the Second World War and the discovery of penicillin. Until recently, it was assumed that silver, being a heavy metal, was toxic for humans and living beings. However, the newest research provides facts that the usage of silver, even for drinking water disinfection, is benign if it is added in small concentrations (in parts per billion. It has been shown in the newer scientific and technical literature that silver in colloidal form is a powerful (secondary disinfectant for drinking water, that it can be effectively used for the disinfection of water containers including swimming pools, installations in food industry, medicine, etc. Particularly, it has been shown that colloidal silver combined with hydrogen peroxide shows synergism having strong bactericidal and antiviral effects. The combination can be successfully used as a disinfectant in agriculture, food production and medicine. The original electrochemical process of production, the mechanism of physical-chemical reactions in that process and the mechanism of the antiseptic affect of the environmentally friendly disinfectant, based on the synergism of colloidal silver and hydrogen peroxide and the activity of electrochemically activated water, is shown. The starting solution was anolyte, obtained in electrochemical activation by water electrolysis of a highly diluted solution of K-tartarate in demineralized water (5.5-1CT4 M. The problem of electrolysis of very dilute aqueous solutions in membrane cells was particularly treated. It was shown that the efficiency of the electrolysis depends on the competition between the two processes: the rates of the processes of hydrogen and oxygen generation at the electrodes and the process of diffusion of hydrogen and hydroxyl ions

  19. Recommended Ventilation Strategies for Energy-Efficient Production Homes

    Energy Technology Data Exchange (ETDEWEB)

    Roberson, J.; Brown, R.; Koomey, J.; Warner, J.; Greenberg, S.

    1998-12-01

    This report evaluates residential ventilation systems for the U.S. Environmental Protection Agency's (EPA's) ENERGY STAR{reg_sign} Homes program and recommends mechanical ventilation strategies for new, low-infiltration, energy-efficient, single-family, ENERGY STAR production (site-built tract) homes in four climates: cold, mixed (cold and hot), hot humid, and hot arid. Our group in the Energy Analysis Department at Lawrence Berkeley National Lab compared residential ventilation strategies in four climates according to three criteria: total annualized costs (the sum of annualized capital cost and annual operating cost), predominant indoor pressure induced by the ventilation system, and distribution of ventilation air within the home. The mechanical ventilation systems modeled deliver 0.35 air changes per hour continuously, regardless of actual infiltration or occupant window-opening behavior. Based on the assumptions and analysis described in this report, we recommend independently ducted multi-port supply ventilation in all climates except cold because this strategy provides the safety and health benefits of positive indoor pressure as well as the ability to dehumidify and filter ventilation air. In cold climates, we recommend that multi-port supply ventilation be balanced by a single-port exhaust ventilation fan, and that builders offer balanced heat-recovery ventilation to buyers as an optional upgrade. For builders who continue to install forced-air integrated supply ventilation, we recommend ensuring ducts are airtight or in conditioned space, installing a control that automatically operates the forced-air fan 15-20 minutes during each hour that the fan does not operate for heating or cooling, and offering ICM forced-air fans to home buyers as an upgrade.

  20. Production and Reproduction Efficiency in Turcana and Ratca Sheep Breeds

    Directory of Open Access Journals (Sweden)

    Maria Sauer

    2017-05-01

    Full Text Available Aim of the current comparative study was to evaluate the production and reproduction efficiency in indigenous Turcana and endangered Ratca sheep breeds. Milk yield for the two breeds was on average 68.23±2.33 kg for Ratca ewes and 76.81±2.99 kg in Turcana, respectively, differences between two breeds were significant (p≤0.01. Conception rates were of 97.7±0.87% in Ratca and of 94.8±0.65% in Turcana ewes, respectively, differences were significant between the two flocks (p≤0.05, with the Ratca ewes achieving better fertility rates, compared to their counterparts, the Turcana breed. For prolificacy, the Turcana ewes outperformed significantly (p≤0.01 the Ratca, with an average litter size of 124.2±1.86% and 110.1±1.44%, respectively. Lambs survival and adult ewe culling rates were not affected by the breed factor (p>0.05. Adult ewes body weight when put to ram was significantly (p≤0.05 influenced by the breed, with Turcana ewes having on average 53.8±2.89 kg, compared to 48.0±3.22 kg for the Ratca ewes. The average farm yearly incomes were estimated to be of 150.32 EUR for Ratca ewe-unit and of 144.97 EUR for the Turcana ewe-unit. Although the Turcana outperformed the Ratca ewes, the annual revenue was higher for the Ratca, due to the state conservation subsidy for rare and endangered breeds.

  1. Benchmarking the production of audit services: an efficiency frontier approach

    OpenAIRE

    Schelleman, C.C.M.; Maijoor, S.J.

    2000-01-01

    To compete effectively in an increasingly competitive audit market audit firms need information on the efficiency of the audit services they offer. This study reports on the cost and labor efficiency for a sample of 114 audit engagements conducted by one of the (then) Big 6 audit firms. Estimating the efficiency of audit engagements is a form of benchmarking, of which economics oriented research has seen many applications. The application to auditing however is, as far as we know, relatively ...

  2. Maximum herd efficiency in meat production II. The influence of ...

    African Journals Online (AJOL)

    A general method is developed for the evaluation of herd efficiency in terms of efficiencies for growth and reproduction. Almost the only requisite knowledge for the application of this method is the value of the allometric slope between the cost of cumulate feed intake and body mass for a target population. The evaluation of ...

  3. Efficient production of transgenic soybean (Glycine max [L] Merrill ...

    African Journals Online (AJOL)

    AJB SERVER

    2006-09-18

    Sep 18, 2006 ... time, cost and transformation efficiency. Consequently, the recovery of fertile soybean plants has proved to be more difficult and reports on successful genetic transformation remain scarce, and spontaneous rather than routine. Therefore, there is a great need to develop new efficient technique for soybean ...

  4. Increasing effectiveness and efficiency of product energy policy

    NARCIS (Netherlands)

    Siderius, H.P.

    2014-01-01

    Energy efficiency improvements in end-uses constitute a large potential to curb primary energy demand into a more sustainable direction. This thesis addresses some of the challenges for policy measures that tap into that potential (minimum efficiency performance standards (MEPS) and energy labels)

  5. Efficient production of transgenic soybean (Glycine max [L] Merrill ...

    African Journals Online (AJOL)

    The present study was designed to evaluate the transformation efficiency and proof the capability of whisker supersonic (WSS) method as an alternative option for soybean (Glycine max [L] Merrill) transformation. We compared soybean transformation efficiency obtained by WSS-mediated with that of particle bombardment ...

  6. Investigations of the efficiency of enzyme production technologies using modelling tools

    DEFF Research Database (Denmark)

    Albæk, Mads Orla; Gernaey, Krist; Hansen, Morten Skov

    is often oxygen transfer from the gas to the liquid phase. In many systems there is a trade-off between productivity and efficiency. Often high productivity technologies and high productivity processes are preferred. We have studied the efficiency of oxygen transfer versus productivity in fed batch......Growing markets and new innovative applications of industrial enzymes leads to increased interest in efficient production of these products. Most industrial enzymes are currently produced in traditional stirred tank reactors in submerged fed batch culture. The limiting parameter in such processes...

  7. Efficiency of electricity use and productivity change of electricity in China: A nonparametric approach

    OpenAIRE

    Chow, Sheung Chi; Wenjing, Xu; Xiaoyang, Wu

    2014-01-01

    This paper tries to investigate efficiency of electricity use of 30 administration regions and productivity change of electricity in China for the period 2003-2008. We use the Data Envelopment Analysis (DEA) method to measure the efficiency of electricity use and productivity change of electricity. From an empirical perspective, we provide a framework to investigate the situation of relative efficiency of electricity use and the growth rate of electricity’s productivity. The results indicate ...

  8. Exergy efficient production, storage and distribution of solar energy

    Energy Technology Data Exchange (ETDEWEB)

    Sandnes, Bjoernar

    2003-07-01

    There are two main themes in this thesis. 1) Exergy efficient utilization of solar energy, where the introduction of alternative technologies such as photovoltaic/thermal collectors and phase change energy storage in a low temperature solar system is investigated. 2) The possibility of storing thermal energy in supercooled liquids is investigated. The introductory chapters introduce the concept of exergy, and focus on the use of solar heat as an inherently low quality source for covering low quality demands associated with space heating and hot water. The different stages of solar energy production, storage, and distribution of heat is discussed, with emphasis on exergy relevant issues. With the low temperature solar heating system as background, the introduction of some additional technologies that are investigated. A section of this thesis presents a study of a small scale PV/T collector as a possible component in a low temperature system. In another section the instrumentation that has been built for studies of full-size PV and thermal systems is described, and the possibility of using the PV unit outputs as parameters for controlling the thermal system operation is briefly discussed. It is suggested that the design of the PV/T unit in terms of whether priority should be given to electricity or heat production should be based on how consumption of high quality auxiliary energy is minimized, and not on adding up the combined exergy which is being produced. Solar combisystems require larger heat storage capacities compared to the more common solar hot water systems. Increased volumetric heat storage capacity can be achieved by latent heat storage systems where thermal energy is stored as heat of fusion in phase change materials (PCMs). A section presents a study where spherically encapsulated PCM is incorporated in a solar heat store. Solar combisystems are often complex, and have a relatively large number of interacting components. Another section describes a

  9. Pricing of miniature vehicles made from telephone card waste

    Science.gov (United States)

    Puspitasari, N. B.; Pujotomo, D.; Muhardiansyah, H.

    2017-12-01

    The number of electronic devices in Indonesia in the last 10 years has been increasing quite drastically which contributes to more electronic waste. E-waste or electronic waste have different characteristics from other kinds of waste. Components of electronic waste often poisonous, consisting dangerous chemicals. The telephone card wasted is also an electronic waste. One alternative to handle and manage telephone card waste is to recycle it into collectible miniature vehicles. But the price of these miniatures is quite high, causing low interest in buying them. A research on the price of miniature vehicles in relation to consumers’ Ability to Pay (ATP) and Willingness to Pay (WTP) needs to be done. Segmentation analysis data, target, product positioning and product marketing mix are needed before commencing the research. Data collection is done through a survey by spreading questionnaire to 100 miniature vehicle collectors in Semarang, questioning their ability and willingness to pay recycled miniature vehicles. Calculations showed average ATP of Rp.112.520, 24 and average WTP of Rp.76.870. The last result showed the estimate pricing according to ATP and WTP which is Rp.66.000 with 58% of the respondents claiming to be willing and able to pay that price.

  10. SWEET CORN FARMING: THE EFFECT OF PRODUCTION FACTOR, EFFICIENCY AND RETURN TO SCALE

    Directory of Open Access Journals (Sweden)

    Dwijatenaya I.B.M.A.

    2017-10-01

    Full Text Available This research aims to determine the effect of production factors on the sweet corn production, the efficiency of sweet corn farming, and the return to scale of sweet corn production. The sampling technique was taken by proportionate stratified random sampling method with the sample number of 57 people while the analyzer used was the program of Frointer 4.1c. The results show that the production factors of the land farm, seed, and fertilizer have a positive and significant effect on sweet corn production. On the other hand, labor production factors have a positive but not significant effect on sweet corn production. It also found that technical efficiency, price efficiency, and economic efficiency of sweet corn farming in Muara Wis Sub-district of Kutai Kartanegara Regency are not efficient yet. The return to scale of sweet corn yield has an increasing return to scale condition.

  11. Reforms, Productivity, and Efficiency in Banking: The Indian Experience

    OpenAIRE

    Rakesh Mohan

    2005-01-01

    India embarked on a strategy of economic reforms in the wake of a serious balance-ofpayments crisis in 1991. A central plank of the reforms was reform in the financial sector and, with banks being the mainstay of financial intermediation, the banking sector. The objective of the banking sector reforms was to promote a diversified, efficient and competitive financial system with the ultimate objective of improving the allocative efficiency of resources through operational flexibility, improved...

  12. Efficiancy of hydrogen peroxide for cleaning production areas and equipments in the radiopharmaceutical production

    Energy Technology Data Exchange (ETDEWEB)

    Baptista, Tatyana S.; Batista, Vanessa; Gomes, Antonio; Matsuda, Margareth; Fukumori, Neuza; Araujo, Elaine B. de, E-mail: tsbaptista@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    A great challenge in the radiopharmaceuticals production is to fulfill the Good Manufacturing Practices (GMPs), involving the validation of process and of all supporting activities such as cleaning and sanitization. The increasingly strict requirements for quality assurance system, with several norms and normative resolutions has led to a constant concern with programs and cleaning validation in pharmaceutical production. The main goal of GMP is to reduce risks inherent to pharmaceutical production, that is to reduce product contamination with microorganisms and cross-contamination. The basic requirements to prevent contamination is the development and implementation of efficient cleaning programs. In the case of clean rooms for the production of injectable radiopharmaceuticals, the requirement for cleaning programs is evidently higher due to the characteristics of these areas with hot cells for radioactive materials, where sterile radiopharmaceuticals are manipulated and distributed before administration to patients just after minutes or hours of its preparation. In the Radiopharmacy Department at IPEN it was established a cleaning program for clean rooms and hot cells using a hydrogen peroxide solution (20% proxitane alfa). The objective of this work was to assess effectiveness of this cleaning agent in reducing and/or eliminating microbial load in the clean rooms and equipment to acceptable levels in accordance with the current legislation. The analysis was conducted using results of the environmental monitoring program with and settling contact plates in clean rooms after the cleaning procedures. Furthermore, it was possible to evaluate the action of the sanitizing agent on the microbial population on the surface of equipment and clean rooms. It was also evaluated the best way to accomplish the cleaning program considering the dosimetric factor in each production process, as the main concern of pharmaceutical companies is the microbiological contamination, in

  13. Miniaturized cathodic arc plasma source

    Science.gov (United States)

    Anders, Andre; MacGill, Robert A.

    2003-04-15

    A cathodic arc plasma source has an anode formed of a plurality of spaced baffles which extend beyond the active cathode surface of the cathode. With the open baffle structure of the anode, most macroparticles pass through the gaps between the baffles and reflect off the baffles out of the plasma stream that enters a filter. Thus the anode not only has an electrical function but serves as a prefilter. The cathode has a small diameter, e.g. a rod of about 1/4 inch (6.25 mm) diameter. Thus the plasma source output is well localized, even with cathode spot movement which is limited in area, so that it effectively couples into a miniaturized filter. With a small area cathode, the material eroded from the cathode needs to be replaced to maintain plasma production. Therefore, the source includes a cathode advancement or feed mechanism coupled to cathode rod. The cathode also requires a cooling mechanism. The movable cathode rod is housed in a cooled metal shield or tube which serves as both a current conductor, thus reducing ohmic heat produced in the cathode, and as the heat sink for heat generated at or near the cathode. Cooling of the cathode housing tube is done by contact with coolant at a place remote from the active cathode surface. The source is operated in pulsed mode at relatively high currents, about 1 kA. The high arc current can also be used to operate the magnetic filter. A cathodic arc plasma deposition system using this source can be used for the deposition of ultrathin amorphous hard carbon (a-C) films for the magnetic storage industry.

  14. Methodical Approach to Diagnostics of Efficiency of Production Economic Activity of an Enterprise

    Directory of Open Access Journals (Sweden)

    Zhukov Andrii V.

    2014-03-01

    Full Text Available The article offers developments of a methodical approach to diagnostics of efficiency of production economic activity of an enterprise, which, unlike the existing ones, is realised through the following stages: analysis of the enterprise external environment; analysis of the enterprise internal environment; identification of components of efficiency of production economic activity for carrying out complex diagnostics by the following directions: efficiency of subsystems of the enterprise production economic activity, efficiency of use of separate types of resources and socio-economic efficiency; scorecard formation; study of tendencies of change of indicators; identification of cause-effect dependencies between the main components of efficiency for diagnosing reasons of its level; diagnosing deviations of indicator values from their optimal values; development of a managerial decision on preserving and increasing efficiency of production economic activity of the enterprise.

  15. Efficiency in milk production on Reunion Island: dealing with land scarcity.

    Science.gov (United States)

    D'Haese, M; Speelman, S; Alary, V; Tillard, E; D'Haese, L

    2009-08-01

    This paper aims to analyze efficiency on dairy farms in Reunion Island, a French overseas district located in the Indian Ocean. On this island, dairy farming is promoted with financial and technical support from the European Union, with the French and local governments aiming at reducing dependency on imports of milk powder and dairy products and creating employment. A critical factor for increasing the local milk production is the limited availability of arable land because of the small size and the volcanic nature of the island. In this paper, we study the efficiency levels of dairy production on 34 farms by using a data envelopment analysis approach. The average technical efficiency score of farms, assuming constant returns to scale, was 0.927, with 19 out of 34 farms not being efficient. The technical efficiency with a variable returns to scale specification was 0.951. The efficiency with which farmers used their land (subvector efficiencies) was estimated in a second model. The average subvector efficiencies calculated with constant returns to scale and variable returns to scale models were lower than the technical efficiencies. The farmers on the efficiency frontier had a relatively higher milk production, milk production per cow, and land surface than those who were less efficient. A policy promoting better use of the land on inefficient farms should increase the milk production-to-land ratio. Possible on-farm strategies are improved feeding systems, farms having their own heifer breeding, and improved genetics.

  16. Efficiency and productivity terms for water management: A matter of contextual relativism versus general absolutism

    NARCIS (Netherlands)

    Halsema, van G.E.; Vincent, L.F.

    2012-01-01

    Growing water scarcity and increasing demands for agricultural products generate much debate about improving the agricultural sector's water use efficiency and productivity. Agricultural engineering traditions feed this debate with notions such as agricultural yield gaps and low water use

  17. Buy Energy-Efficient Products: A Guide for Federal Purchasers and Specifiers

    Energy Technology Data Exchange (ETDEWEB)

    2016-07-01

    In a single year, energy-efficient product purchases could save the federal government almost a half billion dollars worth of energy. By purchasing products that exceed the minimum required efficiency levels, buyers can save the government even more energy and money. Federal employees and contractors must take an active role in ensuring that the government receives products that meet efficiency requirements. This document provides an overview of product purchasing requirements and shows you how to write compliant contracts, find funding, and confirm product compliance.

  18. Crop and soil specific N and P efficiency and productivity in Finland

    OpenAIRE

    Bäckman, S.; A. LANSINK

    2005-01-01

    This paper estimates a stochastic production frontier based on experimental data of cereals production in Finland over the period 1977-1994. The estimates of the production frontier are used to analyze nitrogen and phosphorous productivity and efficiency differences between soils and crops. For this input specific efficiencies are calculated. The results can be used to recognize relations between fertilizer management and soil types as well as to learn where certain soil types and crop combin...

  19. Efficient protein production by yeast requires global tuning of metabolism

    DEFF Research Database (Denmark)

    Huang, Mingtao; Bao, Jichen; Hallstrom, Bjorn M.

    2017-01-01

    intracellular processes with many underlying mechanisms still remaining unclear. Here, we use RNA-seq to study the genome-wide transcriptional response to protein secretion in mutant yeast strains. We find that many cellular processes have to be attuned to support efficient protein secretion. In particular......, altered energy metabolism resulting in reduced respiration and increased fermentation, as well as balancing of amino-acid biosynthesis and reduced thiamine biosynthesis seem to be particularly important. We confirm our findings by inverse engineering and physiological characterization and show...... that by tuning metabolism cells are able to efficiently secrete recombinant proteins. Our findings provide increased understanding of which cellular regulations and pathways are associated with efficient protein secretion....

  20. Ranking production units according to marginal efficiency contribution

    DEFF Research Database (Denmark)

    Ghiyasi, Mojtaba; Hougaard, Jens Leth

    League tables associated with various forms of service activities from schools to hospitals illustrate the public need for ranking institutions by their productive performance. We present a new method for ranking production units which is based on each units marginal contribution to the technical...

  1. A resource efficiency assessment of the industrial mushroom production chain

    NARCIS (Netherlands)

    Zisopoulos, Filippos K.; Becerra Ramírez, Henry A.; Goot, van der Atze Jan; Boom, Remko M.

    2016-01-01

    We compare the exergetic performance of a conventional industrial mushroom production chain with a mushroom production chain where part of the compost waste is recycled and reused as raw material. The critical exergy loss points (CEPs) identified are the cooking-out process of the spent mushroom

  2. Assessing the productive efficiency of bambara groundnut and ...

    African Journals Online (AJOL)

    The productivity of each intercrop and sole crop component was determined in terms of a Crop Performance Ratio (CPR) defined as the productivity of an intercrop per unit area of ground compared with that expected from sole crops sown in the same proportion. The results showed that CPR for total dry weight in the ...

  3. Resources Use Efficiency In Food Crop Production In Ekiti State ...

    African Journals Online (AJOL)

    Result of regression analysis indicates that farm size, fertilizer and purchased inputs were significant inputs that accounted for variation in the output of food crops. The Marginal Value Product (MVP) of all the resources were positive but land was more productive than others inputs. The use of operating credit and fertilizer ...

  4. Factor Productivity and Efficiency in Poultry Farming: Evidence from ...

    African Journals Online (AJOL)

    The main objective of the research was to compare resource use productivity in broiler production looking at the two distinct activities of brooding and selling after four weeks and rearing the brooded to maturity before selling. In order to achieve this, a random sample of 180 broiler farmers of 90 brooders and 90 who rear ...

  5. Wage-productivity differentials and Indian economic efficiency

    NARCIS (Netherlands)

    Sahoo, A.; Ten Raa, T.

    2012-01-01

    A frontier-general equilibrium analysis with skill transformation evaluates the productivities of skilled and unskilled labor and potential of the Indian economy. We compare the wages of skilled and unskilled labor between 1994 and 2002 with their respective productivities over this period.

  6. Nitrogen and Phosphorus Use Efficiencies in Dairy Production in China

    NARCIS (Netherlands)

    Bai, Z.H.; Ma, L.; Oenema, O.; Chen, Q.; Zhang, F.S.

    2013-01-01

    Milk production has greatly increased in China recently, with significant impacts on the cycling of nitrogen (N) and phosphorus (P). However, nutrient flows within the changing dairy production system are not well quantified. The aim of this study was to increase the quantitative understanding of N

  7. Energy Efficiency, Building Productivity and the Commercial Buildings Market

    Energy Technology Data Exchange (ETDEWEB)

    Jones, D.W.

    2002-05-16

    The energy-efficiency gap literature suggests that building buyers are often short-sighted in their failure to apply life-cycle costing principles to energy efficient building technologies, with the result that under investment in these advanced technology occurs. This study examines the reasons this behavior may occur, by analyzing the pressures that market forces place on purchasers of buildings. Our basic conclusion is that the fundamental manner in which the buildings sector does business creates pressures to reduce initial capital outlays and to hedge against a variety of risks, including the ability of building owners to capture benefits from energy efficiency. Starting from the position that building buyers' willingness to pay drives choices over building attributes, we examine basic market principles, the structure of the buildings market, including the role of lenders, and policies that promote penetration of energy efficient technologies. We conclude that greater attention to buyers, and to the incentives and constraints they face, would promote a better understanding of building investment choices and contribute to better policies to promote the penetration of these technologies into markets.

  8. Growth, light interception, radiation use efficiency and productivity of ...

    African Journals Online (AJOL)

    Early sown plants on 8th of July had extended duration to attain physiological maturity, larger leaf area index (LAI) and greater dry matter accumulation. Moreover, early sown plants exceeded in amount of light interception, radiation use efficiency (RUE) and grain yield compared to the late sown ones. The RUE values were ...

  9. Dynamic efficiency of product market competition: Cournot versus Bertrand

    NARCIS (Netherlands)

    Hinloopen, J.; Vandekerckhove, J.

    2007-01-01

    We consider the efficiency of Cournot and Bertrand equilibria in a duopoly with substitutable goods where firms invest in process R&D. Under Cournot competition firms always invest more in R&D than under Bertrand competition. More importantly, Cournot competition yields lower prices than Bertrand

  10. Yield, irrigation production efficiency and economic return of broccoli ...

    African Journals Online (AJOL)

    ... effect of irrigation methods and irrigation schedules on marketable yield, irrigation oroduction efficiency and economic return of Broccoli (Brassica oleracea. Var. italica). lrrigation was applied when the sum of daily pan evaporation data from United States Weather Bureau (USWB) class- A-open ran reach approximately to ...

  11. Assessing the Economic Efficiency of Maize Production in Northern ...

    African Journals Online (AJOL)

    2017-05-01

    May 1, 2017 ... Ghana Living Standards Survey; GSS – Ghana Statistical Service; IRS – Increasing Returns to Scale; MDG – Millennium Development Goal; METASSIP – Medium Term Agriculture Sub-. Sector Investment Plan; MoFA – Ministry of Food and Agriculture; SSA – Sub-Saharan Africa;. TE – Technical Efficiency.

  12. Effect Of Credit Constraint On Production Efficiency Of Farm ...

    African Journals Online (AJOL)

    Credit constraint in agriculture affects not only the purchasing power of producers to procure farm inputs and to cover operating costs in the short run, but also their capacity to make farm-related investments as well as risk behavior in technology choice and adoption. These, in turn, influence technical efficiencies of the ...

  13. Water use efficiency of net primary production in global terrestrial ...

    Indian Academy of Sciences (India)

    The carbon and water cycles of terrestrial ecosystems, which are strongly coupled via water use efficiency (WUE), are influenced by global climate change. To explore the relationship between the carbon and water cycles and predict the effect of climate change on terrestrial ecosystems, it is necessary to study the WUE in ...

  14. Highly Efficient Production of Laccase by the Basidiomycete Pycnoporus cinnabarinus

    NARCIS (Netherlands)

    Alves, AMCR; Record, E; Lomascolo, A; Scholtmeijer, K; Asther, M; Wessels, JGH; Wosten, HAB

    2004-01-01

    An efficient transformation and expression system was developed for the industrially relevant basidiomycete Pycnoporus cinnabarinus. This was used to transform a laccase-deficient monokaryotic strain with the homologous lac1 laccase gene placed under the regulation of its own promoter or that of the

  15. Water-efficient zero-emission greenhouse crop production

    NARCIS (Netherlands)

    Beerling, E.; Os, Van E.; Ruijven, Van J.; Janse, J.; Lee, Andrew; Blok, C.

    2017-01-01

    Greenhouse cultivations are high input systems with respect to water and fertiliser usage. Worldwide increasing water shortages and competition for freshwater is raising the awareness that water use efficiency is a necessity in greenhouse horticulture. Releasing drain water from the greenhouse into

  16. post harvest production efficiency and output elasticity in cassava

    African Journals Online (AJOL)

    d

    But, cassava is progressively shifting roles from being a staple food for human consumption to becoming an efficient industrial crop, particularly, in developing economies of Asia, Latin America and the African Caribbean and Pacific. (ACP) nations (Baguma and Kawuki, 2006). Cassava starch has numerous food application ...

  17. Resource use Efficiency in Sweet Potato Production in Odeda Local ...

    African Journals Online (AJOL)

    (2000). Economic Efficiency of Resource Use in. Millet-Based Cropping Systems in Borno State of. Nigeria, Nigeria Journal of Tropical Agriculture, 2: 33-42. International Potato Centre, (2009). Treasure for the. Poor in Sweet Potato Main. CIP, Lima, Peru, pp. 25. National Bureau of Statistics (2009). Nigeria Abstract of.

  18. Biomass production and water use efficiency of grassland in ...

    African Journals Online (AJOL)

    Using the results from a long-term grazing trial in the Dry Highland Sourveld of the KwaZulu-Natal province, we prepared a water use efficiency value (the ratio of the increment in annual biomass to total annual evapotranspiration) for this rangeland type. Using seasonal biomass measurements recorded between March ...

  19. Crop and soil specific N and P efficiency and productivity in Finland

    NARCIS (Netherlands)

    Bäckman, S.; Oude Lansink, A.G.J.M.

    2005-01-01

    This paper estimates a stochastic production frontier based on experimental data of cereals production in Finland over the period 1977-1994. The estimates of the production frontier are used to analyze nitrogen and phosphorous productivity and efficiency differences between soils and crops. For this

  20. Decision support model for energy efficient greenhouse production system

    OpenAIRE

    Dimitrijević, Aleksandra; Bajkin, Anđelko; Zoranović, Miodrag; Ralević, Ivana

    2012-01-01

    The aim of the research was to make a simple model which can help producers when starting the greenhouse production system. Based on the chosen plant production and available production area, the model suggests which type of greenhouse farmers should, as well as the optimal technical systems and area for further expansion. The control of the model flow was carried out in the MS Excel program. During the testing phase, it was concluded that the MS Excel is not so good in programming so Quick B...

  1. A chain information model for structured knowledge management: Towards effective and efficient food product improvement

    NARCIS (Netherlands)

    Benner, M.; Geerts, R.F.R.; Linnemann, A.R.; Jongen, W.M.F.; Folstar, P.; Cnossen, H.J.

    2003-01-01

    New food products often fail, because they are not designed according to consumers' wishes or not produced efficiently. Frequently, the information required for an effective and efficient product development process is not relayed to the appropriate actor in the chain. This article presents a

  2. A chain information model for structured knowledge management: towards effective and efficient food product improvement

    NARCIS (Netherlands)

    Benner, M.; Geerts, R.F.R.; Linnemann, A.R.; Jongen, W.M.F.; Folstar, P.; Cnossen, H.J.

    2003-01-01

    New food products often fail, because they are not designed according to consumers' wishes or not produced efficiently. Frequently, the information required for an effective and efficient product development process is not relayed to the appropriate actor in the chain. This article presents a

  3. C and N gross efficiencies of copepod egg production studies using a dynamic energy budget model.

    NARCIS (Netherlands)

    Kuijper, L.D.J.; Anderson, T.R.; Kooijman, S.A.L.M.

    2004-01-01

    Simple stoichiometric models based on the principle that limiting elements are used with high efficiency have been unable to capture the apparently constant and low nitrogen gross growth efficiency that characterizes egg production in marine copepods. A new model of egg production is presented based

  4. C and N gross efficiencies of copepod egg production studies using a dynamic energy budget model

    NARCIS (Netherlands)

    Kuijper, L.D.J.; Anderson, T.; Kooijman, S.A.L.M.

    2003-01-01

    Simple stoichiometric models based on the principle that limiting elements are used with high efficiency have been unable to capture the apparently constant and low nitrogen gross growth efficiency that characterizes egg production in marine copepods. A new model of egg production is presented based

  5. Increasing efficiency of humanitarian organizations with volunteer driven information products

    NARCIS (Netherlands)

    Meesters, Kenny; van de Walle, B.A.

    Emerging technologies provide new opportunities to humanitarian organizations for enhancing their response to crisis situations. Since the 2010 Haiti Earthquake, online volunteer communities have been activated to gather data and generate information products to improve humanitarian organizations'

  6. EFFICIENCY OF MINERAL FERTILIZER IN ONION SEED PRODUCTION

    Directory of Open Access Journals (Sweden)

    A. N. Knjazkov

    2013-01-01

    Full Text Available The fertilizer dressing acts to raise the yield of mother onion bulbs and seeds. The different doses of mineral fertilizers influence on storage, biochemical content of mother onion bulbs and seed productivity in different ways.

  7. Energy efficient way of processing waste of milk production

    Directory of Open Access Journals (Sweden)

    Panfilova Julija

    2016-01-01

    Full Text Available The research aim is the search of practical application of biotechnological waste processing of dairy production plants. The result of the study is the development of a process with biogas production by using anaerobic Biomar reactor. Scale of laboratory installation has been conducted based on laboratory studies. Moreover, principal technological scheme of production has been composed, and the appropriate material and technical and economic calculations have been carried out. In addition, major production facilities have been picked up. We found that using the produced biogas as a fuel for the boiler system allows you to reduce the natural gas consumption and reduce the cost of the recycling process at the dairy industry plants.

  8. SOWING GRASSLANDS – EFFICIENT SOLUTION FOR ZOOTEHNICAL PRODUCTION

    Directory of Open Access Journals (Sweden)

    VALENTINA OFELIA ROBESCU

    2008-05-01

    Full Text Available Recruitment is critical for the maintenance of plant populations and community diversity, but sexual regeneration is considered to be infrequent in climatically harsh habitats such as sub alpine grasslands. For this reasons it is very important to improve the grassland. In this paper we study the interaction among milk production, fertilizations and flower composition in sub alpine grasslands. The agrochemical indicators are important because they influence the pasture value and at the final the milk production.

  9. Epstein-Barr Virus BKRF4 Gene Product Is Required for Efficient Progeny Production.

    Science.gov (United States)

    Masud, H M Abdullah Al; Watanabe, Takahiro; Yoshida, Masahiro; Sato, Yoshitaka; Goshima, Fumi; Kimura, Hiroshi; Murata, Takayuki

    2017-09-13

    Epstein-Barr virus (EBV), a member of human gammaherpesvirus, infects mainly B cells. EBV has two alternative life cycles, latent and lytic, and is reactivated occasionally from the latent stage to the lytic cycle. To combat EBV-associated disorders, understanding the molecular mechanisms of the EBV lytic replication cycle is also important. Here, we focused on an EBV lytic gene, BKRF4. Using our anti-BKRF4 antibody, we revealed that the BKRF4 gene product is expressed during the lytic cycle with late kinetics. To characterize the role of BKRF4, we constructed BKRF4-knockout mutants using the bacterial artificial chromosome (BAC) and CRISPR/Cas9 systems. While disruption of the BKRF4 gene had almost no effect on viral protein expression and DNA synthesis, it significantly decreased progeny virion levels in HEK293 and Akata cells. Furthermore, we show that BKRF4 is involved not only in production of progeny virions but also in increasing the infectivity of the virus particles. Immunoprecipitation assays revealed that BKRF4 interacted with a virion protein, BGLF2. We showed that the C-terminal region of BKRF4 was critical for this interaction and for efficient progeny production. Immunofluorescence analysis revealed that BKRF4 partially colocalized with BGLF2 in the nucleus and perinuclear region. Finally, we showed that BKRF4 is a phosphorylated, possible tegument protein and that the EBV protein kinase BGLF4 may be important for this phosphorylation. Taken together, our data suggest that BKRF4 is involved in the production of infectious virions.IMPORTANCE While the latent genes of EBV have been studied extensively, the lytic genes are less well characterized. This study focused on one such lytic gene, BKRF4, which is conserved only among gammaherpesviruses (ORF45 of Kaposi's sarcoma-associated herpesvirus or murine herpesvirus-68). After preparing the BKRF4 knockout virus using B95-8 EBV-BAC, we demonstrated that the BKRF4 gene was involved in infectious progeny

  10. Effect of mergerson efficiency and productivity: Some evidence for banks in Malaysia

    OpenAIRE

    Radam, Alias; Baharom, A. H.; Dayang-Afizzah, A.M.

    2008-01-01

    This study is undertaken to investigate the extent to which mergers lead to efficiency by which services are provided to the public and the productivity of Malaysia’s banking institutions sector. The data cover the period 1993 to 2004, which includes the pre-merger years and the post-merger years. This study attempts to evaluate technical efficiency, efficiency change, technical change and productivity of commercial banks, finance companies and merchant banks using a non-parametric Data Envel...

  11. Energy efficient practices, products and programs for buildings

    OpenAIRE

    Barton, John T.

    1998-01-01

    CIVINS (Civilian Institutions) Thesis document Energy conservation protects the environment and saves money. The United States have achieved outstanding results so far in energy conservation and efficiency since the oil crises in the 1970's. Yet there are enormous opportunities available in the building industry to further reduce energy usage with the technologies that are available today. This report discusses the different building related energy conservation strategies that can be imple...

  12. Enhancing Photon Utilization Efficiency for Astaxanthin Production from Haematococcus lacustris Using a Split-Column Photobioreactor.

    Science.gov (United States)

    Kim, Z-Hun; Park, Hanwool; Lee, Ho-Sang; Lee, Choul-Gyun

    2016-07-28

    A split-column photobioreactor (SC-PBR), consisting of two bubble columns with different sizes, was developed to enhance the photon utilization efficiency in an astaxanthin production process from Haematococcus lacustris. Among the two columns, only the smaller column of SC-PBR was illuminated. Astaxanthin productivities and photon efficiencies of the SC-PBRs were compared with a standard bubble-column PBR (BC-PBR). Astaxanthin productivity of SC-PBR was improved by 28%, and the photon utilization efficiencies were 28-366% higher than the original BC-PBR. The results clearly show that the effective light regime of SC-PBR could enhance the production of astaxanthin.

  13. Evaluation of the efficiency of alternative enzyme production technologies

    DEFF Research Database (Denmark)

    Albæk, Mads Orla

    evaluated by use of the process model. For each technology the scale-up enzyme production was simulated at industrial scale based on equal mass transfer. The technical feasibility of each technology was assessed based on prior knowledge of successful implementation at industrial scale and mechanical......Enzymes are used in an increasing number of industries. The application of enzymes is extending into the production of lignocellulosic ethanol in processes that economically can compete with fossil fuels. Since lignocellulosic ethanol is based on renewable resources it will have a positive impact......, the cost of enzymes is still considered a bottleneck in the economic feasibility of lignocellulose utilization. The purpose of this project was to investigate and compare different technologies for production of these enzymes. The filamentous fungus Trichoderma reesei is currently used for industrial...

  14. A NOTE ON THE MEASUREMENT OF TOTAL FACTOR PRODUCTIVITY, EFFICIENCY AND TECHNOLOGICAL CHANGE USING DATA ENVELOPMENT ANALYSIS

    OpenAIRE

    Umetsu, Chieko

    2001-01-01

    This paper reviews approaches to the measurement of total factor productivity, efficiency and technological change. Nonfrontier analysis assumes that the production technology is efficient and technological change is equivalent to total factor productivity change. On the other hand, the frontier approach explicitly considers inefficiency of production. In the presence of inefficiency, total factor productivity consists of efficiency and technological change. The traditional parametric approac...

  15. Efficient Therapeutic Guideline Production Across Multiple Output Formats

    Science.gov (United States)

    Lewis, Bryn

    2002-01-01

    This paper describes the demands on therapeutic guideline production and a production system (SISMO) designed to cope with these demands. Guidelines are intended for use within a range of clinical information systems and vary in their content, style, intended audience and structure. Complex medical information makes up the content of guidelines and is subsequently viewed in complex and varying environments, on a variety of devices. The functionality of SISMO allows guideline content providers to produce content in a way that is sympathetic to the traditional means of writing guidelines, while also allowing guideline structure to be developed.

  16. The impact of ownership structure on bank productivity and efficiency: Evidence from semi-parametric Malmquist Productivity Index

    Directory of Open Access Journals (Sweden)

    Fadzlan Sufian

    2014-12-01

    Full Text Available The present study employs the state of the art bias-corrected Malmquist Productivity Index method to examine the sources of efficiency and productivity of the foreign and domestic banks operating in the Malaysian banking sector. The preferred methodology enables us to isolate efforts to catch up to the frontier (efficiency change from shifts in the frontier (technological change [TECHCH]. The results indicate that the Malaysian banking sector has exhibited productivity progress mainly attributed to technological progress. The empirical findings suggest that both the domestic and foreign banks have exhibited productivity progress albeit at different quantum attributed mainly to progress in TECHCH.

  17. Non-Construction Approaches to Reducing Greenhouse Gas Emissions Through Energy Efficient Products and Practices - Closed Announcement FY 2017

    Science.gov (United States)

    The Office of Atmospheric Programs is soliciting proposals to advance the energy efficiency of products through product specific technical research, test procedure development, and education that drives consumer adoption of efficient products and practices

  18. Risk Adjusted Production Efficiency of Maize Farmers in Ethiopia: Implication for Improved Maize Varieties Adoption

    Directory of Open Access Journals (Sweden)

    Sisay Diriba Lemessa

    2017-09-01

    Full Text Available This study analyzes the technical efficiency and production risk of 862 maize farmers in major maize producing regions of Ethiopia. It employs the stochastic frontier approach (SFA to estimate the level of technical efficiencies of stallholder farmers. The stochastic frontier approach (SFA uses flexible risk properties to account for production risk. Thus, maize production variability is assessed from two perspectives, the production risk and the technical efficiency. The study also attempts to determine the socio-economic and farm characteristics that influence technical efficiency of maize production in the study area. The findings of the study showed the existence of both production risk and technical inefficiency in maize production process. Input variables (amounts per hectare such as fertilizer and labor positively influence maize output. The findings also show that farms in the study area exhibit decreasing returns to scale. Fertilizer and ox plough days reduce output risk while labor and improved seed increase output risk. The mean technical efficiency for maize farms is 48 percent. This study concludes that production risk and technical inefficiency prevents the maize farmers from realizing their frontier output. The best factors that improve the efficiency of the maize farmers in the study area include: frequency of extension contact, access to credit and use of intercropping. It was also realized that altitude and terracing in maize farms had influence on farmer efficiency.

  19. Analysis of economic efficiency in cocoa production in Ghana ...

    African Journals Online (AJOL)

    The coefficients for household size, cocoa farm size, quantity of insecticides, quantity of fungicides, and quantity of fertilizer were 0.261, 0.514, 0.273, 0.090 and 0.325, respectively. The quantity of fertilizer applied to the cocoa farm had the highest marginal physical product (133.11 kg/ bag), and that of quantity of fungicides ...

  20. Efficiency in rice production : evidence from gogounou district in ...

    African Journals Online (AJOL)

    These different results suggest that the role that must be played project agents to improve management skills of rice producers throughout their visit and training is important. Finally, it's necessary to promote a wideness of rice growing areas for a real rice production development and a sustainable food security in Benin.

  1. Improved production efficiency in cattle to reduce their carbon ...

    African Journals Online (AJOL)

    The FAO publication, Livestock's Long Shadow, indicated that livestock is responsible for 18% of the world's greenhouse gas production thereby creating the perception that livestock is a major cause of global warming. Methane (CH4) makes up 16% of total world gas emissions and is the second most important ...

  2. Determinants of Charcoal Production Efficiency in Ibarapa North ...

    African Journals Online (AJOL)

    ... though charcoal production will continue to have a negative impact on our environment due to deforestation. Government should think on how to make forest resources sustainable and to be a means of generating income, providing employment, reduce poverty and above all reduce global warming through a forestation.

  3. Improved production efficiency in cattle to reduce their carbon ...

    African Journals Online (AJOL)

    p2492989

    Abstract. The FAO publication, Livestock's Long Shadow, indicated that livestock is responsible for 18% of the world's greenhouse gas production thereby creating the perception that livestock is a major cause of global warming. Methane (CH4) makes up 16% of total world gas emissions and is the second most important.

  4. Resource-Use Efficiency in Rice Production Under Small Scale ...

    African Journals Online (AJOL)

    acer

    Cobb-Douglas and Quadratic forms of production were fitted to the data. The Cobb-. Douglas function gave the best fit and was chosen as the lead equation on the basis of the number of significant variables, magnitude of the R2 and the signs of coefficients. The explicit form of the lead equation is given as: Log Y = Log a + ...

  5. Improving radiation use efficiency in greenhouse production systems

    NARCIS (Netherlands)

    Li, Tao

    2015-01-01

    SUMMARY A large increase in agricultural production is needed to feed the increasing world population with their increasing demand per capita. However, growing competition for arable land, water, energy, and the degradation of the environment impose challenges to improve crop

  6. Efficient production of Arthromyces ramosus peroxidase by Aspergillus awamori

    NARCIS (Netherlands)

    Lokman, B.C.; Joosten, V.; Hovenkamp, J.; Gouka, R.J.; Verrips, C.T.; Hondel, C.A.M.J.J. van den

    2003-01-01

    The heterologous production of Arthromyces ramosus peroxidase (ARP) was analysed in the filamentous fungus Aspergillus awamori under control of the inducible endoxylanase promoter. Secretion of active ARP was achieved up to 800 mg l-1 in shake flask cultures. Western blot analysis showed that an

  7. FORMATION AND DEVELOPMENT OF INSTITUTIONS OF EFFICIENCY PRODUCTION INFRASTRUCTURE

    Directory of Open Access Journals (Sweden)

    Anzor H. Jankaziev

    2015-01-01

    Full Text Available The article presents the methodological andmethodical bases of research and development institutes forming effi ciency production infrastructure. Focuses on the organizationalside of the issue as the comparative characteristics. It is proposed allocation of integraland differential approach to assessing the investment attractiveness of the industrial infrastructure of the enterprise. Consideredsectoral, regional, national and internationallevels of development of industrial infrastructure.

  8. Yield, irrigation production efficiency and economic returns of ...

    African Journals Online (AJOL)

    ... gross return, net return and benefit-cost ratio exhibited quadratic relationship which can be used for optimising economic return of broccoli under variable irrigation and lateral spacing. The results revealed that drip irrigation system is profitable for broccoli production inspite of high initial investment. Journal of Science and ...

  9. Measuring Intra-Hospital Clinic Efficiency and Productivity: Application to a Greek University General Hospital

    OpenAIRE

    Maniadakis, N.; N. Kotsopoulos; Prezerakos, P; Yfantopoulos, J.

    2008-01-01

    In this paper we use Data Envelopment Analysis and the Malmquist Productivity Index and its decompositions to assess the productive efficiency and productivity of the in-patient clinics of a large Greek University General Hospital. Clinics are represented by means of a simple model whereby they use inputs (labor and capital) to produce outputs (in-patient days and patient discharges). The efficiency model is input oriented and assumes constant returns to scale. Model validation analyses showe...

  10. The Efficient Clade: Lactic Acid Bacteria for Industrial Chemical Production.

    Science.gov (United States)

    Sauer, Michael; Russmayer, Hannes; Grabherr, Reingard; Peterbauer, Clemens K; Marx, Hans

    2017-08-01

    Lactic acid bacteria are well known to be beneficial for food production and, as probiotics, they are relevant for many aspects of health. However, their potential as cell factories for the chemical industry is only emerging. Many physiological traits of these microorganisms, evolved for optimal growth in their niche, are also valuable in an industrial context. Here, we illuminate these features and describe why the distinctive adaptation of lactic acid bacteria is particularly useful when developing a microbial process for chemical production from renewable resources. High carbon uptake rates with low biomass formation combined with strictly regulated simple metabolic pathways, leading to a limited number of metabolites, are among the key factors defining their success in both nature and industry. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Efficient content production for a university multimedia learning environment

    Science.gov (United States)

    Kurtze, Ali; Grau, Ronald; Creutzburg, Reiner

    2005-03-01

    The use of multimedia learning environments in educational institutions is often associated with the need of uncomplicated content production and moreover, the problem to animate users to maintain the system and its content. A recently developed prototype, 'Instant Seminar,' which is being used at the University of Applied Sciences Brandenburg in Germany, can be seen as an approach for creating an easy-to-use, low-price learning management system (LMS) for multimedia learning environments. The system could be suitable as a solution for those universities wishing to extend their teachings with an electronic learning environment, but which are presently not prepared for a commercial LMS implementation, mostly due to financial or organizational reasons. 'Instant Seminar' follows the didactic concept of 'Hybrid Learning Arrangements' and we considered corresponding features for communication and personal tutoring as part of the design. Important part of the prototype is a production tool called 'Lecture Wizard,' which is basically a Web-based application running on Apache and MySQL servers. It employs Windows Media Services to allow production, modification and broadcasting of AV streams corresponding with the other content of created lectures. Produced streams may have different bandwidths and the distribution of lectures is possible within local and wide area networks. Recently, 'Instant Seminar' has been further developed to serve mobile devices.

  12. Antecedents of the Productive Efficiency in Manufacturing: experiences from Brazilian furniture industry

    Directory of Open Access Journals (Sweden)

    Rebecca Impelizieri Moura da Silveira

    2013-12-01

    Full Text Available This article aims to identify productive characteristics that differentiate technically efficient and inefficient firms in the furniture industry in Brazil. The sampling of companies obeyed especially the accessibility criteria, ensuring, however, the assumptions of homogeneity and reliability of the data. Data collection occurred in loco (May-September 2011 with the respondents, mostly corporate managers. The data analysis is based on efficiency scores obtained using Data Envelopment Analysis. Companies that has efficient production can be defined as those midsized and with pushed production. Additionally, they develop internally much of its processes, using outsourcing with less emphasis on the research and development of new products and with the client research, are relatively recent in the market and have a more innovative profile. But are those companies who have better control of production systems, presenting products with higher quality and at lower unit costs of production.

  13. Optimization of photovoltaic energy production through an efficient switching matrix

    Directory of Open Access Journals (Sweden)

    Pietro Romano

    2013-09-01

    Full Text Available This work presents a preliminary study on the implementation of a new system for power output maximization of photovoltaic generators under non-homogeneous conditions. The study evaluates the performance of an efficient switching matrix and the relevant automatic reconfiguration control algorithms. The switching matrix is installed between the PV generator and the inverter, allowing a large number of possible module configurations. PV generator, switching matrix and the intelligent controller have been simulated in Simulink. The proposed reconfiguration system improved the energy extracted by the PV generator under non-uniform solar irradiation conditions. Short calculation times of the proposed control algorithms allow its use in real time applications even where a higher number of PV modules is required.

  14. Comparing Efficiency and Productivity in Islamic Banking : Case Study Indonesia, Malaysia and Pakistan

    Directory of Open Access Journals (Sweden)

    Ahmad Rodoni

    2017-05-01

    Full Text Available The objective of this research is to analyze both efficiency and productivity of  Islamic Banking Industry in Indonesia, Malaysia and Pakistan. The technique that used in this research is Data Envelopment Analysis (DEA as for measuring efficiency and thus Malmquist Index (MI as for measuring productivity. The result of this research found that Islamic Banking Industry in Indonesia is facing inefficiency that shown by five years average that is not reach 100% efficiency rate. Malaysia also experiences the problem of inefficiency but the condition is better compared to Indonesia. In five years, the efficiency rate of Malaysia Islamic Bank has not reach 100% efficiency rate. Pakistan among the closest country that could reach an efficient rate level for their Islamic banks. Pakistan close to reach 100% efficient rate within the last five years. DOI: 10.15408/aiq.v9i2.5153

  15. The efficiency of the production – the analyse of problems based on the literature research

    Directory of Open Access Journals (Sweden)

    Adam Koliński

    2012-06-01

    Full Text Available Background: The production efficiency is one of the most important problems of the present-day logistics, both at operational as well as strategic levels. Increasing the level of the efficiency of the production process can be achieved in many ways. The reason of the selection of the issues covering the problems of the production efficiency is the lack of a comprehensive model for analyzing the efficiency of the production process, both in the scientific literature and in the business practice. Methods: The main aim of this paper is to systematize the process of obtaining input data for the assessment model of the production efficiency. The methodology for building the assessment model of production efficiency at the initial stage of the analysis was presented.  Results and conclusions:  The basic goal of a preliminary analysis of the model is to coordinate decision-making targets at all levels of the management. The presented assumptions should be regarded as a preliminary analysis, indispensable for the multivariate analysis of the production process efficiency, focused on the operational level.  

  16. Efficient harvesting of Chaetoceros calcitrans for biodiesel production.

    Science.gov (United States)

    Şirin, Sema; Clavero, Ester; Salvadó, Joan

    2015-01-01

    Harvesting is one of the key challenges to determine the feasibility of producing biodiesel from algae. This paper presents experimental results for a cost-effective system to harvest Chaetoceros calcitrans, using natural sedimentation, flocculation, and inducing pH. No efficient sedimentation of microalgal cells was observed only by gravity. By alkalinity-induced flocculation, at a pH value of 9.51, 86% recovery of the cells was achieved with a sedimentation rate of 125 cm/h and a concentration factor (CF) of 4 (volume/volume (v/v)) in 10 min. The maximum photochemical quantum yield of photosystem II (Fv/Fm) of concentrated cells was almost the same as fresh culture (0.621). Commercial flocculants, aluminium sulphate and poly-aluminium chloride (PAC), were also successful in harvesting the studied algal cells. Optimum concentration of aluminium sulphate (AS) could be concluded as 10 ppm with 87.6% recovery and 7.10 CF (v/v) in 30 min for cost-efficient harvesting, whereas for PAC it was 20 ppm with 74% recovery and 6.6 CF (v/v). Fv/Fm yields of concentrated cells with AS and PAC showed a 1% reduction compared to fresh culture. Mg+2 was the triggering ion for alkalinity-induced flocculation in the conditions studied. The rheology behaviour of the concentrated cells was Newtonian with values between 2.2×10(-3) and 2.3×10(-3) Pa s at 30°C.

  17. analysis of cost efficiency in food crop production among small-scale ...

    African Journals Online (AJOL)

    PROF. BARTH EKWEME

    revenue product (MRP) is not equal to that of the marginal cost of that input. Ogundari and Ojo (2006) examined empirically production efficiency of cassava farms in Osun State of. Nigeria using farm level data. The stochastic frontier production and cost function model were used to predict the farm level technical, allocative ...

  18. Evaluation of the efficiency and safety in cosmetic products.

    Science.gov (United States)

    Uckaya, Meryem; Uckaya, Fatih; Demir, Nazan; Demir, Yasar

    2016-02-29

    Chemicals used in cosmetics have to interact with enzymes for beneficial or destroy purpose after they enter in our body. Active sections of enzymes that catalyze reactions have three dimensions and they are active optically. When these limitations of catalytic sections are considered, it may be considered that defining geometric specifications of chemical materials and functional groups they contain may contribute on safety evaluations of cosmetic products. In this study, defining similarities and differences of geometric structures of chemicals that are prohibited to be used in cosmetic products and chemical that are allowed to be used by using group theory and analyze of functional groups that are often encountered in these chemicals are aimed. Molecule formulas related to chemical material of, 276 pieces chemicals that are prohibited to be used in cosmetic products and 65 pieces chemicals that are allowed, are used as the material. Two and three-dimension structures of these formulas are drawn and types and quantity of functional groups they contain are defined. And as a method, freeware (Free Trial) version of "Chem-BioOffice Ultra 13.0 Suite" chemical drawing program to draw two and three-dimension of formulas, "Campus-Licensed" version that are provided for use by our university of "Autodesk 3DS Max" for three-dimension drawings are used. In order to analyze geometric specifications of drawn molecules according to Group Theory and define type and quantity of available functional groups, Excel applications developed by Prof. Dr. Yaşar Demir are used. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. NEW ECO-EFFICIENT PRODUCTS USED IN LEATHER INDUSTRY

    Directory of Open Access Journals (Sweden)

    ROSU Dan

    2016-05-01

    Full Text Available In today's move to "sustainable production" the leather industry, as well as many other industries is recognized as a polluting one. Traditional chemical operations are polluting because of the levels of inorganic chemical waste. Process chemicals which are not consumed within the reactions necessary to convert collagen to leather are currently discharged to waste. These are usually applied during bulk production, such as inorganic agents from beam house and tanning processes, e.g. lime, sulphide, ammonium salts, sulphuric acid and sodium chloride, mineral tanning agents – mainly Cr(III and the less common Al(III, Zr(III, Ti(III, Fe(III salts -, whereas depending on the tanning process and the leather article produced organic chemical waste discharged comprises aldehydic and polyphenolic tanning products, bating enzymes, organic carboxylic acids and excess electrolyte stable synthetic fat liquors. It is rare for chemicals and water to be recovered for re-use from several of these process steps. Moreover, tanners worldwide are required to operate within strict legislative boundaries. Serious drawbacks continuously arise concerning the chrome–tanning process in leather industry and the environmental hazardous consequences of chromium containing effluents. In order to overcome this impediment, a great deal of research has been focused on developing chrome–free tanning methods in the past years, such as titanium tanning. In the present study, Ti–Al tanned bovine leather was characterized by means of SEM microscopy, EDAX elemental analysis, ATR–FTIR spectroscopy, thermogravimetry TGA, and differential scanning calorimetry DSC techniques.

  20. Uniform LED illuminator for miniature displays

    Science.gov (United States)

    Medvedev, Vladimir; Pelka, David G.; Parkyn, William A.

    1998-10-01

    The Total Internally Reflecting (TIR) lens is a faceted structure composed of prismatic elements that collect a source's light over a much larger angular range than a conventional Fresnel lens. It has been successfully applied to the efficient collimation of light from incandescent and fluorescent lamps, and from light-emitting diodes (LEDs). A novel LED-powered collimating backlight is presented here, for uniformly illuminating 0.25'-diagonal miniature liquid- crystal displays, which are a burgeoning market for pagers, cellular phones, digital cameras, camcorders, and virtual- reality displays. The backlight lens consists of a central dual-asphere refracting section and an outer TIR section, properly curved with a curved exit face.

  1. A self-sustained, complete and miniaturized methanol fuel processor for proton exchange membrane fuel cell

    Science.gov (United States)

    Yang, Mei; Jiao, Fengjun; Li, Shulian; Li, Hengqiang; Chen, Guangwen

    2015-08-01

    A self-sustained, complete and miniaturized methanol fuel processor has been developed based on modular integration and microreactor technology. The fuel processor is comprised of one methanol oxidative reformer, one methanol combustor and one two-stage CO preferential oxidation unit. Microchannel heat exchanger is employed to recover heat from hot stream, miniaturize system size and thus achieve high energy utilization efficiency. By optimized thermal management and proper operation parameter control, the fuel processor can start up in 10 min at room temperature without external heating. A self-sustained state is achieved with H2 production rate of 0.99 Nm3 h-1 and extremely low CO content below 25 ppm. This amount of H2 is sufficient to supply a 1 kWe proton exchange membrane fuel cell. The corresponding thermal efficiency of whole processor is higher than 86%. The size and weight of the assembled reactors integrated with microchannel heat exchangers are 1.4 L and 5.3 kg, respectively, demonstrating a very compact construction of the fuel processor.

  2. Development of an eco-efficient product/process for the vulcanising industry

    Directory of Open Access Journals (Sweden)

    Becerra, M. B.

    2014-08-01

    Full Text Available This paper presents the development of an eco-efficient product/process, which has improved mechanical properties from the introduction of natural fibres in the EPDM (Ethylene-Propylene-Diene-Terpolymer rubber formulation. The optimisation analysis is made by a fractional factorial design 211-7. Different formulations were evaluated using a multi-response desirability function, with the aim of finding efficient levels for the manufacturing time-cycle, improving the mechanical properties of the product, and reducing the raw material costs. The development of an eco-efficient product/process generates a sustainable alternative to conventional manufacturing.

  3. Poultry Egg Incubation: Integrating and Optimizing Production Efficiency

    Directory of Open Access Journals (Sweden)

    IC Boleli

    Full Text Available ABSTRACT Due to its central position in the production chain, in-ovo development is influenced by pre-incubation factors that affect the quality of embryonated eggs and incubation conditions themselves, and both may influence egg hatchability and chick quality, as well as bird survival, growth performance, and phenotype in the field. The evolution of the incubation process over the years is characterized by significant scientific and technological development. Presently, the main current focuses of research are the manipulation of thermal incubation conditions, eggshell temperature, and the integrated effects of factors that influence incubation. In this context, one of the questions that needs to be asked is how effective are the current physical conditions of incubation to promote greater hatchability and better quality chicks, and higher survival and better performance in the field under adverse conditions or not. What are the new and future prospects for incubation? The purpose of this paper was to review the role of the physical agents of incubation, such as temperature, relative humidity, O2 and CO2 concentration, and egg turning and position from an integrated perspective, considering egg incubation as the transitional link between egg and poultry production.

  4. Efficiency of Nisin as Preservative in Cosmetics and Topical Products

    Directory of Open Access Journals (Sweden)

    Elisabete Maurício

    2017-10-01

    Full Text Available Nisin is a bacteriocin synthesized by certain species of Lactococcus lactis, that has been recently employed as a preservative in the food industry. Taking into account its potential as a natural preservative, its applicability in cosmetics and topical products was probed, aiming to replace or reduce the use of synthetic preservatives currently used in these products. In vitro susceptibility tests were performed using the plate diffusion method and the “Challenge Test”. The action of nisin was tested when applied alone and in synergy with ethylenediaminetetraacetic acid tetrasodium salt (EDTA and similar synthetic preservatives, Abiol® (INCI-Imidazolidinyl urea and Microcare PM2 (Phenoxyethanol, Ethylparaben, Methylparaben. The results of this study demonstrate that nisin is effective in inhibiting gram-positive microorganisms Staphylococcus aureus and Bacillus sp. However, for other tested microorganisms, only the combination of nisin, EDTA and synthetic preservatives, respectively at 125 ppm/0.1/0.35%, showed antimicrobial activity in compliance with criterion A from ISO 11930. With this study, it is concluded that nisin can be a viable alternative when associated with other preservatives, reducing the use of higher doses of chemical/synthetic preservatives that are often associated with sensitivity and allergic reactions.

  5. Efficient approach for bioethanol production from red seaweed Gelidium amansii.

    Science.gov (United States)

    Kim, Ho Myeong; Wi, Seung Gon; Jung, Sera; Song, Younho; Bae, Hyeun-Jong

    2015-01-01

    Gelidium amansii (GA), a red seaweed species, is a popular source of food and chemicals due to its high galactose and glucose content. In this study, we investigated the potential of bioethanol production from autoclave-treated GA (ATGA). The proposed method involved autoclaving GA for 60min for hydrolysis to glucose. Separate hydrolysis and fermentation processing (SHF) achieved a maximum ethanol concentration of 3.33mg/mL, with a conversion yield of 74.7% after 6h (2% substrate loading, w/v). In contrast, simultaneous saccharification and fermentation (SSF) produced an ethanol concentration of 3.78mg/mL, with an ethanol conversion yield of 84.9% after 12h. We also recorded an ethanol concentration of 25.7mg/mL from SSF processing of 15% (w/v) dry matter from ATGA after 24h. These results indicate that autoclaving can improve the glucose and ethanol conversion yield of GA, and that SSF is superior to SHF for ethanol production. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. MER2 MARS MINIATURE THERMAL EMISSION SPECTROMETER RDR V1.0

    Data.gov (United States)

    National Aeronautics and Space Administration — This archive contains Mars Exploration Rover Miniature Thermal Emission Spectrometer (Mini-TES) Reduced Data Record (RDR) products and ancillary files. The Mini-TES...

  7. An architecture for efficient reuse in flexible production scenarios

    DEFF Research Database (Denmark)

    Andersen, Rasmus Hasle; Dalgaard, Lars; Beck, Anders Billesø

    2015-01-01

    Traditionally, small batch production has not been automated - it has been too resource demanding compared to the expected benefit. However, this is set to change with the new developments in easily trainable robotic co-worker systems, capable of being adapted to new tasks through intuitive user...... interaction. The main concern addressed in this paper is the creation of an architecture, which facilitates flexible robotic systems, and enables hardware-independent system configuration, while providing users of the system with the possibility to instruct and modify process descriptions for industrial tasks....... We present the DTI Robot CoWorker architecture, which is a generic robotic architecture, which provides a system-independent execution framework for adaptive and interactive robotic applications. Our approach has proven viable as we have successfully automated a complicated integration task (among...

  8. Efficient lactulose production from cheese whey using sodium carbonate.

    Science.gov (United States)

    Seo, Yeong Hwan; Park, Gwon Woo; Han, Jong-In

    2015-04-15

    An economical method of lactulose production from cheese whey was developed using sodium carbonate (Na2CO3). Three parameters such as temperature, reaction time, and Na2CO3 concentration were identified as experimental factors, and yield was selected as a response parameter. The experimental factors were optimised employing Response Surface Methodology (RSM). Maximum yield of 29.6% was obtained at reaction time of 20.41 min, Na2CO3 of 0.51% at 90 °C. To overcome this limited lactulose yield, due to the conversion of lactulose to galactose, fed batch system was applied using dried cheese whey as lactose source. By this system, limit was broken, and 15.8 g/L of lactulose is produced in hour. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Interrogation of Streptomyces avermitilis for efficient production of avermectins

    Directory of Open Access Journals (Sweden)

    Jinsong Chen

    2016-03-01

    Full Text Available The 2015 Nobel Prize in Physiology or Medicine has been awarded to avermectins and artemisinin, respectively. Avermectins produced by Streptomyces avermitilis are excellent anthelmintic and potential antibiotic agents. Because wild-type strains only produce low levels of avermectins, much research effort has focused on improvements in avermectin production to meet the ever increasing demand for such compounds. This review describes the strategies that have been widely employed and the future prospects of synthetic biology applications in avermectin yield improvement. With the help of genome sequencing of S. avermitilis and an understanding of the avermectin biosynthetic/regulatory pathways, synthetic and systems biotechnology approaches have been applied for precision engineering. We focus on the design and synthesis of biological chassis, parts, devices, and modules from diverse microbes to reconstruct and optimize their dynamic processes, as well as predict favorable effective overproduction of avermectins by a 4Ms strategy (Mine, Model, Manipulation, and Measurement.

  10. Root system-based limits to agricultural productivity and efficiency

    DEFF Research Database (Denmark)

    Thorup-Kristensen, Kristian; Kirkegaard, John

    2016-01-01

    (0·65 t ha(-1)) and sowing date (0·63 t ha(-1)) than by current genetic differences in rooting depth (0·36 t ha(-1)). Matching of deep-rooted genotypes to management provided the greatest improvements related to deep water capture. In the wetter environment of Denmark, reduced leaching of N......BACKGROUND: There has been renewed global interest in both genetic and management strategies to improve root system function in order to improve agricultural productivity and minimize environmental damage. Improving root system capture of water and nutrients is an obvious strategy, yet few studies...... consider the important interactions between the genetic improvements proposed, and crop management at a system scale that will influence likely success. SCOPE: To exemplify these interactions, the contrasting cereal-based farming systems of Denmark and Australia were used, where the improved uptake...

  11. Industry efficiency and total factor productivity growth under resources and environmental constraint in China.

    Science.gov (United States)

    Tao, Feng; Li, Ling; Xia, X H

    2012-01-01

    The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity.

  12. Production of multiple transgenic Yucatan miniature pigs expressing human complement regulatory factors, human CD55, CD59, and H-transferase genes.

    Directory of Open Access Journals (Sweden)

    Young-Hee Jeong

    Full Text Available The present study was conducted to generate transgenic pigs coexpressing human CD55, CD59, and H-transferase (HT using an IRES-mediated polycistronic vector. The study focused on hyperacute rejection (HAR when considering clinical xenotransplantation as an alternative source for human organ transplants. In total, 35 transgenic cloned piglets were produced by somatic cell nuclear transfer (SCNT and were confirmed for genomic integration of the transgenes from umbilical cord samples by PCR analysis. Eighteen swine umbilical vein endothelial cells (SUVEC were isolated from umbilical cord veins freshly obtained from the piglets. We observed a higher expression of transgenes in the transgenic SUVEC (Tg SUVEC compared with the human umbilical vein endothelial cells (HUVEC. Among these genes, HT and hCD59 were expressed at a higher level in the tested Tg organs compared with non-Tg control organs, but there was no difference in hCD55 expression between them. The transgenes in various organs of the Tg clones revealed organ-specific and spatial expression patterns. Using from 0 to 50% human serum solutions, we performed human complement-mediated cytolysis assays. The results showed that, overall, the Tg SUVEC tested had greater survival rates than did the non-Tg SUVEC, and the Tg SUVEC with higher HT expression levels tended to have more down-regulated α-Gal epitope expression, resulting in greater protection against cytotoxicity. By contrast, several Tg SUVEC with low CD55 expression exhibited a decreased resistance response to cytolysis. These results indicated that the levels of HT expression were inversely correlated with the levels of α-Gal epitope expression and that the combined expression of hCD55, hCD59, and HT proteins in SUVECs markedly enhances a protective response to human serum-mediated cytolysis. Taken together, these results suggest that combining a polycistronic vector system with SCNT methods provides a fast and efficient alternative

  13. Efficient distribution of toy products using ant colony optimization algorithm

    Science.gov (United States)

    Hidayat, S.; Nurpraja, C. A.

    2017-12-01

    CV Atham Toys (CVAT) produces wooden toys and furniture, comprises 13 small and medium industries. CVAT always attempt to deliver customer orders on time but delivery costs are high. This is because of inadequate infrastructure such that delivery routes are long, car maintenance costs are high, while fuel subsidy by the government is still temporary. This study seeks to minimize the cost of product distribution based on the shortest route using one of five Ant Colony Optimization (ACO) algorithms to solve the Vehicle Routing Problem (VRP). This study concludes that the best of the five is the Ant Colony System (ACS) algorithm. The best route in 1st week gave a total distance of 124.11 km at a cost of Rp 66,703.75. The 2nd week route gave a total distance of 132.27 km at a cost of Rp 71,095.13. The 3rd week best route gave a total distance of 122.70 km with a cost of Rp 65,951.25. While the 4th week gave a total distance of 132.27 km at a cost of Rp 74,083.63. Prior to this study there was no effort to calculate these figures.

  14. Efficiency and productivity of conventional and organic farms in Finland 1994-1997

    NARCIS (Netherlands)

    Oude Lansink, A.; Pietola, K.; Bäckman, S.

    2002-01-01

    This paper uses data envelopment analysis to compute overall technical and input-specific technical efficiency measures of conventional and organic farms in Finland. Moreover, productivity measures are determined, indicating differences in technology employed by organic and conventional farms. The

  15. A two-stage DEA model to evaluate sustainability and energy efficiency of tomato production

    National Research Council Canada - National Science Library

    Hossein Raheli; Rassul Mohammad Rezaei; Mehri Raei Jadidi; Hassan Ghasemi Mobtaker

    2017-01-01

    The aims of this study were to evaluate the sustainability and efficiency of tomato production and to investigate the determinants of inefficiency of tomato farming in Marand region of East Azerbaijan province, Iran...

  16. Measuring efficiency and productivity change (PTF) in the Peruvian electricity distribution companies after reforms

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Reyes, Raul [Organismo Supervisor de la Inversion en Energia y Mineria, Osinergmin (Peru); Tovar, Beatriz [Infrastructure and Transport Research Group (EIT), Department of Applied Economics, University of Palmas de Gran Canaria (Spain)

    2009-06-15

    This paper analyzes the evolution of productivity of the electricity distribution companies in Peru, to assess whether reforms have improved the efficiency in this sector. The paper also identifies potential sources of productivity changes, based on market restructuring the electricity sector and changes in property. To do this, we rely on a set of data for 14 distribution companies, for the period 1996-2006. Our analysis suggests that improvements in the efficiency and productivity of electricity distribution in Peru have occurred, and that there is a relationship between the restructuring of distribution sector and the enhancement of productivity. (author)

  17. White Paper on Energy Efficiency Status of Energy-Using Products in China (2011)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Romankiewicz, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-06-01

    This White Paper focuses on the areas and products involved in the above tasks, based on the White Paper - Energy Efficiency Status of Energy-Using Products in China (2010), here referred to as “White Paper 2010”, which analyzed the energy efficiency status of 21 typical energy-using products in five sectors: household appliances, office equipment, commercial equipment, industrial equipment, and lighting equipment. Table 1 illustrates the detailed product coverage for this year’s paper, noting the addition of three household appliance items (automatic electric rice cooker, AC electric fan, and household induction cooktop) and one industrial sector item (three-phase distribution transformer).

  18. SOME FACTORS INFLUENCING THE EFFICIENCY OF PRODUCTION OF ACETYLMETHYLCARBINOL BY RHIZOPUS NIGRICANS.

    Science.gov (United States)

    FIELDS, M L

    1964-03-01

    Incubation time had no effect on the efficiency ratio [dry weight-acetylmethylcarbinol (AMC)] during the incubation times tested. The mycelium was more efficient in synthetic media at pH 3 and 4 than at pH 5 and 6. Mycelium also produced AMC more efficiently in apple juice and in synthetic media containing yeast extract or vitamins, especially thiamine. KCl, MgSO(4), and KH(2)PO(4) had significant suppressing effects on AMC production in a synthetic medium.

  19. 78 FR 73737 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for General...

    Science.gov (United States)

    2013-12-09

    ..., Office of Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J, 1000 Independence... Conservation Standards for General Service Lamps AGENCY: Office of Energy Efficiency and Renewable Energy... available at: http://www1.eere.energy.gov/buildings/appliance_standards/product.aspx?productid=82 . DATES...

  20. Organisational determinants of production and efficiency in general practice: a population-based study

    DEFF Research Database (Denmark)

    Olsen, Kim Rose; Gyrd-Hansen, Dorte; Sørensen, Torben Højmark

    2011-01-01

    Shortage of general practitioners (GPs) and an increased political focus on primary care have enforced the interest in efficiency analysis in the Danish primary care sector. This paper assesses the association between organisational factors of general practices and production and efficiency. We...

  1. Hedging Weather Risk for Corn Production in Northeastern China: The Efficiency of Weather-indexed Insurance

    NARCIS (Netherlands)

    Sun, Baojing; Guo, Changhao; Kooten, van G.C.

    2014-01-01

    Purpose – The paper analyzes the hedging efficiency of weather-indexed insurance for corn production in Northeast of China. The purpose of this paper is to identify the potential weather variables that impact corn yields and to analyze the efficiency of weather-indexed insurance under varying

  2. Pretreatment of woody biomass for biofuel production: energy efficiency, technologies, and recalcitrance

    Science.gov (United States)

    J.Y. Zhu; Xuejun Pan; Ronald S. Jr. Zalesny

    2010-01-01

    This mini review discusses several key technical issues associated with cellulosic ethanol production from woody biomass: energy consumption for woody biomass pretreatment, pretreatment energy efficiency, woody biomass pretreatment technologies, and quantification of woody biomass recalcitrance. Both total sugar yield and pretreatment energy efficiency, defined as the...

  3. Product lifetime, energy efficiency and climate change: A case study of air conditioners in Japan.

    Science.gov (United States)

    Nishijima, Daisuke

    2016-10-01

    This study proposed a modelling technique for estimating life-cycle CO2 emissions of durable goods by considering changes in product lifetime and energy efficiency. The stock and flow of durable goods was modelled by Weibull lifetime distributions and the trend in annual energy efficiency (i.e., annual electricity consumption) of an "average" durable good was formulated as a reverse logistic curve including a technologically critical value (i.e., limit energy efficiency) with respect to time. I found that when the average product lifetime is reduced, there is a trade-off between the reduction in emissions during product use (use phase), due to the additional purchases of new, more energy-efficient air conditioners, and the increase in emissions arising from the additional production of new air conditioners stimulated by the reduction of the average product lifetime. A scenario analysis focused on residential air conditioners in Japan during 1972-2013 showed that for a reduction of average lifetime of 1 year, if the air conditioner energy efficiency limit can be improved by 1.4% from the estimated current efficiency level, then CO2 emissions can be reduced by approximately the same amount as for an extension of average product lifetime of 1 year. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Impacts of Rural Labor Resource Change on the Technical Efficiency of Crop Production in China

    Directory of Open Access Journals (Sweden)

    Ning Yin

    2017-03-01

    Full Text Available This paper probes effects of the evolvement of labor resources on technical efficiency in crop production in rural China. Based on twelve years of data on crop production of 30 provinces in China, a stochastic frontier production function model is used to measure crop production efficiency in three crop-functional areas—the production area, the consumption area, and the balanced area. Then effects of both quantity and quality change in labor force on technical efficiency in different regions of China are analyzed. Results show that rural China generally has an increasing number of employees shifted to non-agricultural sectors and a decreasing trend of the stock of human capital. However, both these two changes in rural labor force have significantly positive effects on improving crop production efficiency. In addition, China’s technical inefficiency is at an average of 22.2%. Dynamically, the technical efficiencies show a tendency to rise steadily throughout China and in three areas, while the consumption area possesses the highest technical efficiency. Those results may lend some experience for other countries that are currently experiencing rural labor force and economic transition.

  5. Design of China Leading Energy Efficiency Program (LEP) for equipment and appliances and comparative study of international experience on super-efficient products

    Science.gov (United States)

    Liang, Xiuying; Zhu, Chunyan

    2017-11-01

    With rising global emphasizes on climate change and sustainable development, how to accelerate the transformation of energy efficiency has become an important question. Designing and implementing energy-efficiency policies for super-efficient products represents an important direction to achieve breakthroughs in the field of energy conservation. On December 31, 2014, China’s National Development and Reform Commission (NDRC) jointly six other ministerial agencies launched China Leading Energy Efficiency Program (LEP), which identifies top efficiency models for selected product categories. LEP sets the highest energy efficiency benchmark. Design of LEP took into consideration of how to best motivate manufacturers to accelerate technical innovation, promote high efficiency products. This paper explains core elements of LEP, such as objectives, selection criteria, implementation method and supportive policies. It also proposes recommendations to further improve LEP through international policy comparison with Japan’s Top Runner Program, U.S. Energy Star Most Efficient, and SEAD Global Efficiency Medal.

  6. Miniature reciprocating heat pumps and engines

    Science.gov (United States)

    Thiesen, Jack H. (Inventor); Willen, Gary S. (Inventor); Mohling, Robert A. (Inventor)

    2003-01-01

    The present invention discloses a miniature thermodynamic device that can be constructed using standard micro-fabrication techniques. The device can be used to provide cooling, generate power, compress gases, pump fluids and reduce pressure below ambient (operate as a vacuum pump). Embodiments of the invention relating to the production of a cooling effect and the generation of electrical power, change the thermodynamic state of the system by extracting energy from a pressurized fluid. Energy extraction is attained using an expansion process, which is as nearly isentropic as possible for the appropriately chosen fluid. An isentropic expansion occurs when a compressed gas does work to expand, and in the disclosed embodiments, the gas does work by overcoming either an electrostatic or a magnetic force.

  7. Miniature Lightweight Ion Pump

    Science.gov (United States)

    Sinha, Mahadeva P.

    2010-01-01

    This design offers a larger surface area for pumping of active gases and reduces the mass of the pump by eliminating the additional vacuum enclosure. There are three main components to this ion pump: the cathode and anode pumping elements assembly, the vacuum enclosure (made completely of titanium and used as the cathode and maintained at ground potential) containing the assembly, and the external magnet. These components are generally put in a noble diode (or differential) configuration of the ion pump technology. In the present state of the art, there are two cathodes, one made of titanium and the other of tantalum. The anodes are made up of an array of stainless steel cylinders positioned between the two cathodes. All the elements of the pump are in a vacuum enclosure. After the reduction of pressure in this enclosure to a few microns, a voltage is applied between the cathode and the anode elements. Electrons generated by the ionization are accelerated toward the anodes that are confined in the anode space by the axial magnetic field. For the generation of the axial field along the anode elements, the magnet is designed in a C-configuration and is fabricated from rare earth magnetic materials (Nd-B-Fe or Sm-Co) possessing high energy product values, and the yoke is fabricated from the high permeability material (Hiperco-50A composed of Fe-Co-V). The electrons in this region collide with the gas molecules and generate their positive ions. These ions are accelerated into the cathode and eject cathode material (Ti). The neutral atoms deposit on the anode surfaces. Because of the chemical activity of Ti, the atoms combine with chemically active gas molecules (e.g. N2, O2, etc.) and remove them. New layers of Ti are continually deposited, and the pumping of active gases is thus accomplished. Pumping of the inert gases is accomplished by their burial several atomic layers deep into the cathode. However, they tend to re-emit if the entrapping lattice atoms are

  8. Federal state differentials in the efficiency of health production in Germany: an artifact of spatial dependence?

    Science.gov (United States)

    Felder, Stefan; Tauchmann, Harald

    2013-02-01

    Due to regional competition and patient migration, the efficiency of healthcare provision at the regional level is subject to spatial dependence. We address this issue by applying a spatial autoregressive model to longitudinal data from Germany at the district ('Kreis') level. The empirical model is specified to explain efficiency scores, which we derive through non-parametric order-m efficiency analysis of regional health production. The focus is on the role of health policy of federal states ('Bundesländer') for district efficiency. Regression results reveal significant spatial spillover effects. Notably, accounting for spatial dependence does not decrease but increases the estimated effect of federal states on district efficiency. It appears that genuinely more efficient states are less affected by positive efficiency spillovers, so that taking into account spatial dependence clarifies the importance of health policy at the state level.

  9. Productivity and production efficiency of cows of different genetic groups submitted to cultivated pastures during pre or postpartum

    Directory of Open Access Journals (Sweden)

    Ricardo Zambarda Vaz

    2014-10-01

    Full Text Available We assessed through the weight of cows and calves up to weaning at 90 days and the reproductive performance from pregnancy to weaning, the productivity and efficiency of 94 Charolais (CH, Nellore (NE, ½CH ½NE e ½NE ½CH cows submitted the following feeding systems: cows kept on native pasture (NP; cows kept on cultivated pasture (CP, composed of oat (Avena sativa, ryegrass (Lollium multiflorum and clover (Trifolium vesiculosum from July 15 to September 15 and the remainder of the trial on natural pasture (CPN; and cows kept on cultivated pasture during September 15 to November 15, and the remainder on native pasture (NPC. Cows kept on CP produced 22.6% more calves than cows kept exclusively on NP, and were more efficient (P.05, being higher than the purebreds in productivity and production efficiency

  10. Invited review: improving feed efficiency in dairy production: challenges and possibilities.

    Science.gov (United States)

    Connor, E E

    2015-03-01

    Despite substantial advances in milk production efficiency of dairy cattle over the last 50 years, rising feed costs remain a significant threat to producer profitability. There also is a greater emphasis being placed on reducing the negative impacts of dairy production on the environment; thus means to lower greenhouse gas (GHG) emissions and nutrient losses to the environment associated with cattle production are being sought. Improving feed efficiency among dairy cattle herds offers an opportunity to address both of these issues for the dairy industry. However, the best means to assess feed efficiency and make genetic progress in efficiency-related traits among lactating cows without negatively impacting other economically important traits is not entirely obvious. In this review, multiple measurements of feed efficiency for lactating cows are described, as well as the heritability of the traits and their genetic and phenotypic correlations with other production traits. The measure of feed efficiency, residual feed intake is discussed in detail in terms of the benefits for its selection, how it could be assessed in large commercial populations, as well as biological mechanisms contributing to its variation among cows, as it has become a commonly used method to estimate efficiency in the recent scientific literature.

  11. Gender discrimination and its impact on income, productivity, and technical efficiency: evidence from Benin

    NARCIS (Netherlands)

    Kinkingninhoun-Mêdagbé, F.M.; Diagne, A.; Simtowe, F.; Agboh-Noameshie, A.R.; Adegbola, P.

    2010-01-01

    This paper examines the occurrence and impact of gender discrimination in access to production resources on the income, productivity, and technical efficiency of farmers. Through an empirical investigation of farmers from Koussin-Le´le´, a semi-collective irrigated rice scheme in central Benin, we

  12. Efficiency of resource-use and elasticity of production among catfish ...

    African Journals Online (AJOL)

    This study employed the use of the Stochastic Frontier Production Function in the empirical analysis of efficiency of resource-use and elasticity of production among catfish farmers in Kaduna, Nigeria. The simple random sampling technique was employed in selecting 60 catfish farmers drawn from the sampling frame ...

  13. EFFICIENCY THE KEY TO FUTURE PIG PRODUCTION E.H. Kemm

    African Journals Online (AJOL)

    EFFICIENCY THE KEY TO FUTURE PIG. PRODUCTION. E.H. Kemm. Aninwl and Dairy Science Reseorch Insfitute, Irene. The continued production of pigs and ..... Data from Meat. Board Pig Scherne f)ata frorn an above average farmer. Table 7. I'erlrtrmance and producrion el.ftcienc.y, of South African pig herds. Colurnn.

  14. Nitrogen use efficiency goals in dairy production systems: -a review and case study examples

    Science.gov (United States)

    Nitrogen use efficiency (NUE), the ratio between N outputs in products over N inputs, is often used to evaluate N use outcomes of an agricultural system and the risk of environmental N loss. In this paper we address the question what realistic NUE goals can be targeted for dairy production systems? ...

  15. Technical Efficiency of Small-Scale Rabbit Production in South-West ...

    African Journals Online (AJOL)

    This study examines technical efficiency of rabbit rearing in South-west Nigeria. Data were collected from 150 rabbit farmsteads across states in the South-West Nigeria. The Cobb-Douglas Stochastic Production Frontier Functions were used to analyse the study data. Stochastic Production Frontier Function estimates ...

  16. Study of a new energy efficient process for French fries production

    NARCIS (Netherlands)

    Loon, W.A.M.; Linssen, J.P.H.; Legger, A.; Heijmans, R.M.H.; Deventer, van H.; Burgering, M.J.M.; Drooge, van B.; Voragen, A.G.J.

    2005-01-01

    A new, energy efficient production process for French fries was developed and evaluated. Superheated steam (SHS) was used for evaporation of water instead of pre-drying with air and par-frying with oil. The product was frozen by vacuum cooling. Unfortunately, with this process it was not possible to

  17. Membrane processes for alcohol-water separation: Improving the energy efficiency of biofuel production

    Science.gov (United States)

    The economics and environmental impact of producing fuels and chemicals biologically can be a strong function of the efficiency with which the fermentation products are removed from the biological media. Due to growth inhibition by some fermentation products, including ethanol an...

  18. Technical efficiency and productivity of Chinese county hospitals: an exploratory study in Henan province, China.

    Science.gov (United States)

    Cheng, Zhaohui; Tao, Hongbing; Cai, Miao; Lin, Haifeng; Lin, Xiaojun; Shu, Qin; Zhang, Ru-Ning

    2015-09-09

    Chinese county hospitals have been excessively enlarging their scale during the healthcare reform since 2009. The purpose of this paper is to examine the technical efficiency and productivity of county hospitals during the reform process, and to determine whether, and how, efficiency is affected by various factors. 114 sample county hospitals were selected from Henan province, China, from 2010 to 2012. Data envelopment analysis was employed to estimate the technical and scale efficiency of sample hospitals. The Malmquist index was used to calculate productivity changes over time. Tobit regression was used to regress against 4 environmental factors and 5 institutional factors that affected the technical efficiency. (1) 112 (98.2%), 112 (98.2%) and 104 (91.2%) of the 114 sample hospitals ran inefficiently in 2010, 2011 and 2012, with average technical efficiency of 0.697, 0.748 and 0.790, respectively. (2) On average, during 2010-2012, productivity of sample county hospitals increased by 7.8%, which was produced by the progress in technical efficiency changes and technological changes of 0.9% and 6.8%, respectively. (3) Tobit regression analysis indicated that government subsidy, hospital size with above 618 beds and average length of stay assumed a negative sign with technical efficiency; bed occupancy rate, ratio of beds to nurses and ratio of nurses to physicians assumed a positive sign with technical efficiency. There was considerable space for technical efficiency improvement in Henan county hospitals. During 2010-2012, sample hospitals experienced productivity progress; however, the adverse change in pure technical efficiency should be emphasised. Moreover, according to the Tobit results, policy interventions that strictly supervise hospital bed scale, shorten the average length of stay and coordinate the proportion among physicians, nurses and beds, would benefit hospital efficiency. Published by the BMJ Publishing Group Limited. For permission to use (where

  19. Technical efficiency and productivity of Chinese county hospitals: an exploratory study in Henan province, China

    Science.gov (United States)

    Cheng, Zhaohui; Tao, Hongbing; Cai, Miao; Lin, Haifeng; Lin, Xiaojun; Shu, Qin; Zhang, Ru-ning

    2015-01-01

    Objectives Chinese county hospitals have been excessively enlarging their scale during the healthcare reform since 2009. The purpose of this paper is to examine the technical efficiency and productivity of county hospitals during the reform process, and to determine whether, and how, efficiency is affected by various factors. Setting and participants 114 sample county hospitals were selected from Henan province, China, from 2010 to 2012. Outcome measures Data envelopment analysis was employed to estimate the technical and scale efficiency of sample hospitals. The Malmquist index was used to calculate productivity changes over time. Tobit regression was used to regress against 4 environmental factors and 5 institutional factors that affected the technical efficiency. Results (1) 112 (98.2%), 112 (98.2%) and 104 (91.2%) of the 114 sample hospitals ran inefficiently in 2010, 2011 and 2012, with average technical efficiency of 0.697, 0.748 and 0.790, respectively. (2) On average, during 2010–2012, productivity of sample county hospitals increased by 7.8%, which was produced by the progress in technical efficiency changes and technological changes of 0.9% and 6.8%, respectively. (3) Tobit regression analysis indicated that government subsidy, hospital size with above 618 beds and average length of stay assumed a negative sign with technical efficiency; bed occupancy rate, ratio of beds to nurses and ratio of nurses to physicians assumed a positive sign with technical efficiency. Conclusions There was considerable space for technical efficiency improvement in Henan county hospitals. During 2010–2012, sample hospitals experienced productivity progress; however, the adverse change in pure technical efficiency should be emphasised. Moreover, according to the Tobit results, policy interventions that strictly supervise hospital bed scale, shorten the average length of stay and coordinate the proportion among physicians, nurses and beds, would benefit hospital efficiency

  20. Computer modelling of the influences of a subsystems’ interaction on energetic efficiency of biofuel production systems

    Directory of Open Access Journals (Sweden)

    Wasiak Andrzej

    2017-01-01

    Full Text Available Energetic efficiency of biofuel production systems, as well as that of other fuels production systems, can be evaluated on the basis of modified EROEI indicator. In earlier papers, a new definition of the EROEI indicator was introduced. This approach enables the determination of this indicator separately for individual subsystems of a chosen production system, and therefore enables the studies of the influence of every subsystem on the energetic efficiency of the system as a whole. The method has been applied to the analysis of interactions between agricultural, internal transport subsystems, as well as preliminary studies of the effect of industrial subsystem.

  1. Job satisfaction or production? How staff and leadership understand operating room efficiency: a qualitative study.

    Science.gov (United States)

    Arakelian, E; Gunningberg, L; Larsson, J

    2008-11-01

    How to increase efficiency in operating departments has been widely studied. However, there is no overall definition of efficiency. Supervisors urging staff to work efficiently may meet strong reactions due to staff believing that demands for efficiency means just stress at work. Differences in how efficiency is understood may constitute an obstacle to supervisors' efforts to promote it. This study aimed to explore how staff and leadership understand operating room efficiency. Twenty-one members of staff and supervisors in an operating department in a Swedish county hospital were interviewed. The analysis was performed with a phenomenographic approach that aims to discover the variations in how a phenomenon is understood by a group of people. Six categories were found in the understanding of operation room efficiency: (A) having the right qualifications; (B) enjoying work; (C) planning and having good control and overview; (D) each professional performing the correct tasks; (E) completing a work assignment; and (F) producing as much as possible per time unit. The most significant finding was that most of the nurses and assistant nurses understood efficiency as individual knowledge and experience emphasizing the importance of the work process, whereas the supervisors and physicians understood efficiency in terms of production per time unit or completing an assignment. The concept 'operating room efficiency' is understood in different ways by leadership and staff members. Supervisors who are aware of this variation will have better prerequisites for defining the concept and for creating a common platform towards becoming efficient.

  2. ANALYSIS AND IMPROVEMENT OF PRODUCTION EFFICIENCY IN A CONSTRUCTION MACHINE ASSEMBLY LINE

    Directory of Open Access Journals (Sweden)

    Alidiane Xavier

    2016-07-01

    Full Text Available The increased competitiveness in the market encourages the ongoing development of systems and production processes. The aim is to increase production efficiency to production costs and waste be reduced to the extreme, allowing an increased product competitiveness. The objective of this study was to analyze the overall results of implementing a Kaizen philosophy in an automaker of construction machinery, using the methodology of action research, which will be studied in situ the macro production process from receipt of parts into the end of the assembly line , prioritizing the analysis time of shipping and handling. The results show that the continuous improvement activities directly impact the elimination of waste from the assembly process, mainly related to shipping and handling, improving production efficiency by 30% in the studied processes.

  3. [Relationship between productivity and efficiency in research funding for Spanish regions].

    Science.gov (United States)

    Buela-Casal, Gualberto; Bermúdez, Ma Paz; Sierra, Juan Carlos; Quevedo-Blasco, Raúl; Guillén-Riquelme, Alejandro; Castro, Ángel

    2010-11-01

    Quality is a major current needs and requirements for any university system. The funding that universities receive a relevant influence on the scientific productivity of these. Thus the main objective of this study is to classify the Spanish regions in terms of scientific productivity and economic efficiency of their universities. It followed the same procedure used to prepare the 2009 ranking of research productivity in Spanish universities. The results show that there are differences in the classifications made on the basis of productivity and efficiency in the investigation. The more efficient Spanish regions in managing its resources to obtain research results are Catalonia, Asturias, Aragon, and Cantabria. From the results, each region can compare their situation with the rest and analyze strengths and weaknesses in research in terms of resources.

  4. Energy Savings Opportunities and Energy Efficiency Performance Indicators for a Serial Production Line

    OpenAIRE

    Brundage, Michael; Chang, Qing; Wang, Shiyao; Feng, Shaw; Xiao, Guoxian; Arinez, Jorge

    2013-01-01

    Part 2: Sustainable Supply Chains; International audience; Modern manufacturing facilities waste various energy savings opportunities (ESO) and lack proper performance indicators to measure energy efficiency on the production line. The ESO is an opportunity window calculated from on-line production data, such as production count, machine downtime records, buffer levels, and machine idle status, allowing certain machines to be turned off for energy savings without negatively affecting throughp...

  5. Efficiency and productivity assessment of public hospitals in Greece during the crisis period 2009-2012.

    Science.gov (United States)

    Xenos, P; Yfantopoulos, J; Nektarios, M; Polyzos, N; Tinios, P; Constantopoulos, A

    2017-01-01

    This study is an initial effort to examine the dynamics of efficiency and productivity in Greek public hospitals during the first phase of the crisis 2009-2012. Data were collected by the Ministry of Health after several quality controls ensuring comparability and validity of hospital inputs and outputs. Productivity is estimated using the Malmquist Indicator, decomposing the estimated values into efficiency and technological change. Hospital efficiency and productivity growth are calculated by bootstrapping the non-parametric Malmquist analysis. The advantage of this method is the estimation efficiency and productivity through the corresponding confidence intervals. Additionally, a Random-effects Tobit model is explored to investigate the impact of contextual factors on the magnitude of efficiency. Findings reveal substantial variations in hospital productivity over the period from 2009 to 2012. The economic crisis of 2009 had a negative impact in productivity. The average Malmquist Productivity Indicator (MPI) score is 0.72 with unity signifying stable production. Approximately 91% of the hospitals score lower than unity. Substantial increase is observed between 2010 and 2011, as indicated by the average MPI score which fluctuates to 1.52. Moreover, technology change scored more than unity in more than 75% of hospitals. The last period (2011-2012) has shown stabilization in the expansionary process of productivity. The main factors contributing to overall productivity gains are increases in occupancy rates, type and size of the hospital. This paper attempts to offer insights in efficiency and productivity growth for public hospitals in Greece. The results suggest that the average hospital experienced substantial productivity growth between 2009 and 2012 as indicated by variations in MPI. Almost all of the productivity increase was due to technology change which could be explained by the concurrent managerial and financing healthcare reforms. Hospitals operating

  6. Breed of cow and herd productivity affect milk nutrient recovery in curd, and cheese yield, efficiency and daily production.

    Science.gov (United States)

    Stocco, G; Cipolat-Gotet, C; Gasparotto, V; Cecchinato, A; Bittante, G

    2018-02-01

    Little is known about cheese-making efficiency at the individual cow level, so our objective was to study the effects of herd productivity, individual herd within productivity class and breed of cow within herd by producing, then analyzing, 508 model cheeses from the milk of 508 cows of six different breeds reared in 41 multi-breed herds classified into two productivity classes (high v. low). For each cow we obtained six milk composition traits; four milk nutrient (fat, protein, solids and energy) recovery traits (REC) in curd; three actual % cheese yield traits (%CY); two theoretical %CYs (fresh cheese and cheese solids) calculated from milk composition; two overall cheese-making efficiencies (% ratio of actual to theoretical %CYs); daily milk yield (dMY); and three actual daily cheese yield traits (dCY). The aforementioned phenotypes were analyzed using a mixed model which included the fixed effects of herd productivity, parity, days in milk (DIM) and breed; the random effects were the water bath, vat, herd and residual. Cows reared in high-productivity herds yielded more milk with higher nutrient contents and more cheese per day, had greater theoretical %CY, and lower cheese-making efficiency than low-productivity herds, but there were no differences between them in terms of REC traits. Individual herd within productivity class was an intermediate source of total variation in REC, %CY and efficiency traits (10.0% to 17.2%), and a major source of variation in milk yield and dCY traits (43.1% to 46.3%). Parity of cows was an important source of variation for productivity traits, whereas DIM affected almost all traits. Breed within herd greatly affected all traits. Holsteins produced more milk, but Brown Swiss cows produced milk with higher actual and theoretical %CYs and cheese-making efficiency, so that the two large-framed breeds had the same dCY. Compared with the two large-framed breeds, the small Jersey cows produced much less milk, but with greater actual

  7. Analysis of Production Funds Efficiency in the Country’s Crane Sector

    Directory of Open Access Journals (Sweden)

    Edita Valėnaitė

    2012-07-01

    Full Text Available The article deals with methodological aspects of the production funds analysis. In this work the study of literature which examines the basic and transferable funds is presented. Much attention is paid to the analysis of basic production funds in the crane sector. Analysis of the basic production funds in the country’s crane sector is presented. Special attention is paid to the structure of the cranes park and crane utilization efficiency. In the analysis of basic production funds, the factors that impede the efficiency of production funds were established as follows: the greatest negative impact on basic production funds efficiency of businesses was in small tower crane fleet; a small range of tower cranes in the park is reducing the technical possibilities of the lease. Basing on the analysis and observation of tower cranes installation and dismantling, the poor supply of the parts for the work place, lack of competence and motivation of the support staff have been ascertained. After elimination of these factors it is possible to raise the efficiency of the main production funds.Article in Lithuanian

  8. Toward a miniaturized fundus camera.

    Science.gov (United States)

    Gliss, Christine; Parel, Jean-Marie; Flynn, John T; Pratisto, Hans; Niederer, Peter

    2004-01-01

    Retinopathy of prematurity (ROP) describes a pathological development of the retina in prematurely born children. In order to prevent severe permanent damage to the eye and enable timely treatment, the fundus of the eye in such children has to be examined according to established procedures. For these examinations, our miniaturized fundus camera is intended to allow the acquisition of wide-angle digital pictures of the fundus for on-line or off-line diagnosis and documentation. We designed two prototypes of a miniaturized fundus camera, one with graded refractive index (GRIN)-based optics, the other with conventional optics. Two different modes of illumination were compared: transscleral and transpupillary. In both systems, the size and weight of the camera were minimized. The prototypes were tested on young rabbits. The experiments led to the conclusion that the combination of conventional optics with transpupillary illumination yields the best results in terms of overall image quality. (c) 2004 Society of Photo-Optical Instrumentation Engineers.

  9. A two-stage DEA model to evaluate sustainability and energy efficiency of tomato production

    Directory of Open Access Journals (Sweden)

    Hossein Raheli

    2017-12-01

    Full Text Available The aims of this study were to evaluate the sustainability and efficiency of tomato production and to investigate the determinants of inefficiency of tomato farming in Marand region of East Azerbaijan province, Iran. For these purposes, a two-stage methodology was applied, in which for the first time a fractional regression model (FRM was employed in the second stage of analysis, so that, in the first stage a nonparametric Data Envelopment Analysis (DEA was used to analyze the efficiencies of tomato production and in the second stage, farm specific variables such as education level, farmers’ age, total land size and use of manure were used in a fractional regression model to explain how these factors influenced efficiency of tomato farming. The results of the first stage showed that there are considerable differences between efficient and inefficient farmers in the studied area, so that the main differences were in the use of chemical fertilizers, biocides and water for irrigation. Also, the results of second stage revealed that farmers’ age, education level and total land size positively affected efficiency in tomato production. So, better use of land, chemical fertilizers, water for irrigation and improving the farmers’ educational levels through literacy campaign and land consolidation would probably increase the efficiency in the long term. Keywords: Data envelopment analysis, Energy efficiency, Fractional regression model, Tomato

  10. Efficiency of water use and nitrogen for goat milk production in irrigated pasture to different management

    Directory of Open Access Journals (Sweden)

    A.C.R. Cavalcante

    Full Text Available ABSTRACT The aim was to determine the efficiency of use of water and nitrogen for forage production and goat-milk production on an irrigated Tanzania Guineagrass (Panicum maximum cv. Tanzânia pasture subjected to different management practices. The management levels tested were combinations among nitrogen fertilization levels and post-grazing residual heights (ResH: Intensive (ResH = 33.0cm and 600.0kg N/ha.year-1; Moderate (ResH = 47.0cm and 300.0kg N/ha.year-1; Light (ResH = 47cm and 0kg N/ha.year-1; and Conventional (ResH = 33cm and 0kg N/ha year-1. The efficiency of water use for forage production was higher in intensive and Moderate management. The Conventional management was recommended only for forage production since there is no nitrogen input available because this result was similar to Intensive management in water efficiency. The efficiency of water use to produce goat milk was higher in Intensive management. Moderate management presented higher efficiency of nitrogen to produce forage. On the other hand, Intensive management was more efficient using nitrogen in goat milk production. The amount of water needed to produce one liter of goat milk varied from 893.20 to 3,933.50L. In the moderate management, up to 121.48kg forage and 21.56kg of milk were produced for every kilogram of N utilized. Intensive management is advantageous for water use efficiency as well nitrogen efficiency to produce goat milk in cultivated pasture.

  11. Enhancement of Energy Efficiency and Food Product Quality Using Adsorption Dryer with Zeolite

    Directory of Open Access Journals (Sweden)

    Moh Djaeni

    2013-06-01

    Full Text Available Drying is a basic operation in wood, food, pharmaceutical and chemical industry. Currently, several drying methods are often not efficient in terms of energy consumption (energy efficiency of 20-60% and have an impact on product quality degradation due to the introduction of operational temperature upper 80oC. This work discusses the development of adsorption drying with zeolite to improve the energy efficiency as well as product quality. In this process, air as drying medium is dehumidified by zeolite. As a result humidity of air can be reduced up to 0.1 ppm. So, for heat sensitive products, the drying process can be performed in low or medium temperature with high driving force. The study has been conducted in three steps: designing the dryer, performing laboratory scale equipment (tray, spray, and fluidised bed dryers with zeolite, and evaluating the dryer performance based on energy efficiency and product quality. Results showed that the energy efficiency of drying process is 15-20% higher than that of conventional dryer. In additon, the dryer can speed up drying time as well as retaining product quality.

  12. Miniature sensor suitable for electronic nose applications

    DEFF Research Database (Denmark)

    Pinnaduwage, L. A.; Gehl, A. C.; Allman, S. L.

    2007-01-01

    selective detection. In order to keep the overall detector unit small, miniature sensors with sufficient sensitivity of detection will be needed.We report sensitive detection of dimethyl methylphosphonate DMMP, a stimulant for the nerve agents, using a miniature sensor unit based on piezoresistive...

  13. Analysis the Efficiency and Productivity of Indonesian Pharmaceutical Public Companies Using Data Envelopment Analysis

    Directory of Open Access Journals (Sweden)

    Dewi Hanggraeni

    2014-08-01

    Full Text Available As one of the biggest medicines market in the South East Asia, the pharmaceutical industry inIndonesia has a huge potential market. However, the majority supply of raw materials has been imported.Besides, regulations of the Health Ministry and the Trade Ministry have still hampered mostplayers in Indonesia pharmaceutical industry. Therefore, this study used Data Envelopment Analysis(DEA models to analyze efficiency and productivity change in the Indonesian pharmaceutical industrybetween 2006 and 2011, listed in the Indonesia Stock Exchange and also supported by applyingefficiency financial ratio. This study finds that the decision for the most relatively efficient companyis different using DEA compared to efficiency financial ratios, yet DEA has better measurement ofefficiency. It is proven by one of State-owned Enterprises has been evaluated underperformed by thefinancial ratio analysis, unexpectedly is efficient using the DEA approach. This study has also proposedand tested a hypothesis on the average efficiency to check if the domestic and foreign pharmaceuticalcompanies differ in their efficiency but the result implies that there is no significant statisticaldifference among them. This study indicates that firms having dominant contribution in selling overthe-counter medicines are more efficient than selling ethical medicines. Lastly, technological changecontribution has more influence to productivity change instead of pure technical efficiency change inIndonesia pharmaceutical companies.

  14. Radical production efficiency and electrical characteristics of a coplanar barrier discharge built by multilayer ceramic technology

    DEFF Research Database (Denmark)

    Jõgi, Indrek; Erme, Kalev; Levoll, Erik

    2017-01-01

    , immersed into a ceramic dielectric barrier. A closed flow-through system necessary for the measurements was prepared by placing a quartz plate at a height of 3 mm from the ceramic barrier. The production of nitrogen radicals was determined from the removal of a trace amount of NO in pure N2 gas, while...... the production of oxygen radicals was determined by ozone production in pure O2 or synthetic air. The production efficiency of N and O radicals and NO oxidation in synthetic air was comparable with the efficiency of a volume barrier discharge device. The power density per unit of surface area of the CBD device...... was more than two times larger than that of a similar volume barrier discharge setup, which makes the CBD device a compact alternative for gas treatment. The production of ozone and different nitrogen oxides was also evaluated for the open system of the CBD which is usable for surface treatment. The ozone...

  15. Design of ultraprecision machine tools with application to manufacturing of miniature and micro components

    OpenAIRE

    Luo, X; Cheng, K; Webb, D; Wardle, F

    2005-01-01

    Currently the underlying necessities for predictability, producibility and productivity remain big issues in ultraprecision machining of miniature/microproducts. The demand on rapid and economic fabrication of miniature/microproducts with complex shapes has also made new challenges for ultraprecision machine tool design. In this paper the design for an ultraprecision machine tool is introduced by describing its key machine elements and machine tool design procedures. The focus is on the revie...

  16. Design Parameters of a Miniaturized Piezoelectric Underwater Acoustic Transmitter

    Directory of Open Access Journals (Sweden)

    Thomas J. Carlson

    2012-07-01

    Full Text Available PZT ceramics have been widely used in underwater acoustic transducers. However, literature available discussing the design parameters of a miniaturized PZT-based low-duty-cycle transmitter is very limited. This paper discusses some of the design parameters—the backing material, driving voltage, PZT material type, power consumption and the transducer length of a miniaturized acoustic fish tag using a PZT tube. Four different types of PZT were evaluated with respect to the source level, energy consumption and bandwidth of the transducer. The effect of the tube length on the source level is discussed. The results demonstrate that ultralow-density closed-cell foam is the best backing material for the PZT tube. The Navy Type VI PZTs provide the best source level with relatively low energy consumption and that a low transducer capacitance is preferred for high efficiency. A 35% reduction in the transducer length results in 2 dB decrease in source level.

  17. Problems of Development and Increase of Economic Efficiency of Sugar Beet Production

    Directory of Open Access Journals (Sweden)

    Tomashevska Olga A.

    2017-06-01

    Full Text Available The aim of the article is the studying of the trends of development and economic efficiency of sugar beet production (using the example of agricultural enterprises of Rokytne district of Kyiv region and an attempt to outline the directions for improvement of the situation in the sugar beet industry. As a result of the research, the dynamics of development and economic efficiency of sugar beet production at farms of Rokytne district of Kyiv region is analyzed, and the break-even volume of sugar beet production by agrarian enterprises of Kiev region and an individual enterprise of Rokytne district is determined. Particular attention is paid to the dynamics of profitability of sugar beet production in the period from 2011 to 2015. The main problems hindering the development of sugar beet production are identified, namely, the lack of sales channels and high production costs. Prospects for further research in this area are to increase the economic efficiency of sugar beet production and find ways to develop this sector, provided that the production is properly organized, the manufacturing process is followed, the fertilizers are properly used, the seeds are chosen correctly, advanced technologies and high-performance equipment are applied, etc.

  18. AN ESTIMATION OF TECHNICAL EFFICIENCY OF GARLIC PRODUCTION IN KHYBER PAKHTUNKHWA PAKISTAN

    Directory of Open Access Journals (Sweden)

    Nabeel Hussain

    2014-04-01

    Full Text Available This study was conducted to estimate the technical efficiency of farmers in garlic production in Khyber Pakhtunkhwa province, Pakistan. Data was randomly collected from 110 farmers using multistage sampling technique. Maximum likelihood estimation technique was used to estimate Cob-Douglas frontier production function. The analysis revealed that the estimated mean technical efficiency was 77 percent indicating that total output can be further increased with efficient use of resources and technology. The estimated gamma value was found to be 0.93 which shows 93% variation in garlic output due to inefficiency factors. The analysis further revealed that seed rate, tractor hours, fertilizer, FYM and weedicides were positive and statistically significant production factors. The results also show that age and education were statistically significant inefficiency factors, age having positive and education having negative relationship with the output of garlic. This study suggests that in order to increase the production of garlic by taking advantage of their high efficiency level, the government should invest in the research and development aspects for introducing good quality seeds to increase garlic productivity and should organize training programs to educate farmers about garlic production.

  19. Productivity, Efficiency, and Competitiveness of Small-Scale Organic Cotton Production in Tanzania

    DEFF Research Database (Denmark)

    Mgeni, Dotto; Henningsen, Arne

    Cotton is known as the “white gold” of Africa since it is the only export crop in which the continent’s share in the world market has increased over the past decades. Total cotton production as well as productivity grew particularly in Western and Central Africa. In contrast, cotton production grew...... be an attractive option for cotton farmers in Eastern Africa, because in this region, the use of chemical inputs is anyway virtually absent, the labor cost is low, and organic cotton has a higher sales price than conventional cotton. In order to scrutinize this option, we use microeconomic production theory...... and stochastic frontier models to thoroughly analyze organic cotton production in Tanzania. Our study is based on a unique data set of 180 small-scale organic cotton farmers in the Meatu region in Tanzania. This data set does not only provide information on input and output quantities, prices of traded inputs...

  20. AN INVESTIGATION OF THE APPLICABILITY OF SOFTWARE PRODUCT LINE ENGINEERING FOR ENERGY AND COST-EFFICIENT GREENHOUSE PRODUCTION

    DEFF Research Database (Denmark)

    Mærsk-Møller, Hans Martin

    Software product line engineering (SPLE) has shown promising results with respect to software reuse and has a wide range of benefits. Thus, we want to investigate the applicability of SPLE to develop tools for improving the energy and cost-efficiency of greenhouse production in Denmark. Supplemen......Software product line engineering (SPLE) has shown promising results with respect to software reuse and has a wide range of benefits. Thus, we want to investigate the applicability of SPLE to develop tools for improving the energy and cost-efficiency of greenhouse production in Denmark...... control concept, called DynaLight, which reduces the energy consumption and cost by optimizing the use of the supplementary light in greenhouses. As the DynaLight concept can be used to analyze, plan and control production, a tool suite has to be developed. The need for developing multiple tools......, or products, makes the development potentially suitable for SPLE, which exhibits reuse advantages with development of multiple similar products. One small team of developers is assigned to develop the tools. Hence, there is a demand for an effective method to develop, maintain and evolve multiple tools...

  1. Increasing energy efficiency level of building production based on applying modern mechanization facilities

    Science.gov (United States)

    Prokhorov, Sergey

    2017-10-01

    Building industry in a present day going through the hard times. Machine and mechanism exploitation cost, on a field of construction and installation works, takes a substantial part in total building construction expenses. There is a necessity to elaborate high efficient method, which allows not only to increase production, but also to reduce direct costs during machine fleet exploitation, and to increase its energy efficiency. In order to achieve the goal we plan to use modern methods of work production, hi-tech and energy saving machine tools and technologies, and use of optimal mechanization sets. As the optimization criteria there are exploitation prime cost and set efficiency. During actual task-solving process we made a conclusion, which shows that mechanization works, energy audit with production juxtaposition, prime prices and costs for energy resources allow to make complex machine fleet supply, improve ecological level and increase construction and installation work quality.

  2. Scenario simulation of small farms’ production efficiencies in the Eastern Cape Province, South Africa

    OpenAIRE

    Hosu, Sunday; Sibanda, Melusi; Mushunje, Abbyssinia

    2013-01-01

    Smallholder agriculture is not achieving its pivotal role of attaining food security in developing countries like South Africa. In rural areas, smallholder farmer’s efficiencies have always been hindered mostly by some factors beyond their control such Agro-ecological factors. The challenge is how agriculture can be a key component of the drivers of rural economic development. This article presents a scenario simulation of small farms’ production efficiencies in the Eastern Cape Province, Sou...

  3. The Choice of Participation Forms in Community-Based Group Farming and Efficiency in Team Production

    OpenAIRE

    Nakajima, Shinsaku; Tahara, Kengo

    2009-01-01

    Past studies suggest that family farming is more productive than farming groups, but empirical studies are not enough to conclude which is more efficient. This paper tries to econometrically analyze the efficiency difference between farming groups and family farming, using original plot yield data from a district in Japan. We accomplish this by, first, analyzing the empirical determinants behind the farmers’ choice of participation forms in farming groups based on communities. Second, we veri...

  4. Marketing the Eco-Efficiency of a Finnish Product in Russia

    OpenAIRE

    Sattarova, Asiia

    2016-01-01

    The purpose of this qualitatitive research was to find the way for a Finnish company to market the eco-efficient characteristics as an advantage of their products and bring the message effectively to their consumers in Russia. The core objective was to create a strategic marketing plan; the goal was to work out an efficient strategy, practical marketing steps and effective solutions. The first theory part focused on the comparison of general eco-awareness in Europe and Russia. The part rev...

  5. Estimation of Resource Productivity and Efficiency: An Extended Evaluation of Sustainability Related to Material Flow

    Directory of Open Access Journals (Sweden)

    Pin-Chih Wang

    2014-09-01

    Full Text Available This study is intended to conduct an extended evaluation of sustainability based on the material flow analysis of resource productivity. We first present updated information on the material flow analysis (MFA database in Taiwan. Essential indicators are selected to quantify resource productivity associated with the economy-wide MFA of Taiwan. The study also applies the IPAT (impact-population-affluence-technology master equation to measure trends of material use efficiency in Taiwan and to compare them with those of other Asia-Pacific countries. An extended evaluation of efficiency, in comparison with selected economies by applying data envelopment analysis (DEA, is conducted accordingly. The Malmquist Productivity Index (MPI is thereby adopted to quantify the patterns and the associated changes of efficiency. Observations and summaries can be described as follows. Based on the MFA of the Taiwanese economy, the average growth rates of domestic material input (DMI; 2.83% and domestic material consumption (DMC; 2.13% in the past two decades were both less than that of gross domestic product (GDP; 4.95%. The decoupling of environmental pressures from economic growth can be observed. In terms of the decomposition analysis of the IPAT equation and in comparison with 38 other economies, the material use efficiency of Taiwan did not perform as well as its economic growth. The DEA comparisons of resource productivity show that Denmark, Germany, Luxembourg, Malta, Netherlands, United Kingdom and Japan performed the best in 2008. Since the MPI consists of technological change (frontier-shift or innovation and efficiency change (catch-up, the change in efficiency (catch-up of Taiwan has not been accomplished as expected in spite of the increase in its technological efficiency.

  6. LED power efficiency of biomass, fatty acid, and carotenoid production in Nannochloropsis microalgae.

    Science.gov (United States)

    Ma, Ruijuan; Thomas-Hall, Skye R; Chua, Elvis T; Eltanahy, Eladl; Netzel, Michael E; Netzel, Gabriele; Lu, Yinghua; Schenk, Peer M

    2017-12-29

    The microalga Nannochloropsis produces high-value omega-3-rich fatty acids and carotenoids. In this study the effects of light intensity and wavelength on biomass, fatty acid, and carotenoid production with respect to light output efficiency were investigated. Similar biomass and fatty acid yields were obtained at high light intensity (150 μmol m-2 s-1) LEDs on day 7 and low light intensity (50 μmol m-2 s-1) LEDs on day 11 during cultivation, but the power efficiencies of biomass and fatty acid (specifically eicosapentaenoic acid) production were higher for low light intensity. Interestingly, low light intensity enhanced both, carotenoid power efficiency of carotenoid biosynthesis and yield. White LEDs were neither advantageous for biomass and fatty acid yields, nor the power efficiency of biomass, fatty acid, and carotenoid production. Noticeably, red LED resulted in the highest biomass and fatty acid power efficiency, suggesting that LEDs can be fine-tuned to grow Nannochloropsis algae more energy-efficiently. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Some Factors Influencing the Efficiency of Production of Acetylmethylcarbinol by Rhizopus nigricans1

    Science.gov (United States)

    Fields, M. L.

    1964-01-01

    Incubation time had no effect on the efficiency ratio [dry weight-acetylmethylcarbinol (AMC)] during the incubation times tested. The mycelium was more efficient in synthetic media at pH 3 and 4 than at pH 5 and 6. Mycelium also produced AMC more efficiently in apple juice and in synthetic media containing yeast extract or vitamins, especially thiamine. KCl, MgSO4, and KH2PO4 had significant suppressing effects on AMC production in a synthetic medium. PMID:14131362

  8. Energy efficiency standards for eight consumer products: public meeting clarification, questions and answers

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-08-01

    Eighteen corporations and manufacturers provided answers to many questions posed at a public meeting on energy efficiency standards for eight consumer products. Questions on the regulations concerning the manufacturing standards, performance standards, and testing standards are included. Questions were posed about air conditioners, refrigerators, refrigerator-freezers, stoves (ranges), ovens, clothes dryers, oil fired burners, water heaters, furnaces, etc. A presentation containing information pertaining to the values of average annual energy consumption per unit used by DOE in its analysis leading to proposed energy efficiency standards for nine types of consumer products is included. (MCW)

  9. Feature-based Approach in Product Design with Energy Efficiency Consideration

    Science.gov (United States)

    Li, D. D.; Zhang, Y. J.

    2017-10-01

    In this paper, a method to measure the energy efficiency and ecological footprint metrics of features is proposed for product design. First the energy consumption models of various manufacturing features, like cutting feature, welding feature, etc. are studied. Then, the total energy consumption of a product is modeled and estimated according to its features. Finally, feature chains that combined by several sequence features based on the producing operation orders are defined and analyzed to calculate global optimal solution. The corresponding assessment model is also proposed to estimate their energy efficiency and ecological footprint. Finally, an example is given to validate the proposed approach in the improvement of sustainability.

  10. EFFICIENCY AND PRODUCTIVITY IN VENEZUELAN INDUSTRY DIRECT REDUCTION IRON IN GUAYANA REGION

    Directory of Open Access Journals (Sweden)

    Jairo J. Pico F.

    2013-07-01

    Full Text Available The overall objective of the research was to analyze the efficiency and productivity in the industry Venezuelan Direct Reduced Iron (DRI in the Guayana region during 2005 to 2009. The methodology used was Data Envelopment Analysis DEA-Malmquist Index and Russell Hicks-Moorsteen. The results indicate an efficiency of 98% input and a waste of the installed capacity in the industry of 48%. It also reduces the overall productivity of 80.8% on average, and 2009-2011, there is a tendency to lower it, reaching a value of 60%

  11. Light quality and efficiency of consumer grade solid state lighting products

    DEFF Research Database (Denmark)

    Dam-Hansen, Carsten; Corell, Dennis Dan; Thorseth, Anders

    2013-01-01

    on SSL products for replacement of incandescent lamps and halogen spotlights. The warm white light and good color rendering properties of these traditional light sources are a must for lighting in Denmark and the Nordic countries. 266 SSL replacement lamps have been tested for efficiency and light...... quality with respect to correlated color temperature and color rendering properties. This shows a trade-off between high color rendering warm white light and energy efficiency. The lumen and color maintenance over time has been investigated and results for products running over 11000 h will be presented...

  12. Factors affecting the efficiency of foal production by intracytoplasmic sperm injection (ICSI

    Directory of Open Access Journals (Sweden)

    Grady ST

    2016-08-01

    Full Text Available Equine embryo production by intracytoplasmic sperm injection (ICSI is currently effective enough to be used clinically. However, there are several factors that affect the efficiency of this procedure because, in addition to specialized equipment, skill in oocyte and embryo handling, and sperm preparation as well as knowledge of oocyte and embryo culture are required. To the best of our knowledge, there are currently only a couple of reports available on the expected efficiency of foal production by ICSI. Here we discuss the parameters that pertain to the Texas A&M Equine Embryo Laboratory only, as other laboratories may have different results.

  13. Efficiency assessment of an integrated gasifier/boiler system for hydrogen production with different biomass types

    Energy Technology Data Exchange (ETDEWEB)

    Kalinci, Yildiz [Department of Technical Programs, Izmir Vocational High School, Dokuz Eylul University, Education Campus Buca, Izmir (Turkey); Hepbasli, Arif [Department of Mechanical Engineering, Faculty of Engineering, Ege University, 35100 Izmir (Turkey); Dincer, Ibrahim [Faculty of Engineering and Applied Science, University of Ontario Institute of Technology, 2000 Simcoe Street North, Oshawa, Ontario (Canada)

    2010-05-15

    In this study, we utilize some experimental data taken from the literature, especially on the air-blown gasification characteristics of six different biomass fuels, namely almond shell (ASF), walnut pruning (WPF), rice straw (RSF), whole tree wood chips (WWF), sludge (SLF) and non-recyclable waste paper (NPF) in order to study the thermodynamic performance of an integrated gasifier-boiler power system for its hydrogen production. In this regard, both energy and exergy efficiencies of the system are investigated. The exergy contents of different biomass fuels are calculated to be ranging from 15.89 to 22.07 MJ/kg, respectively. The hydrogen concentrations based on the stack gases at the cyclone exit are determined to be between 7 and 18 (%v/v) for NPF and ASF. Also, percentages of combustible vary from 30% to 46%. The stack gas has physical and chemical exergies. The total specific exergy rates are calculated and illustrated. These values change from 3.54 to 6.41 MJ/kg. Then, two types of exergy efficiencies are calculated, such as that exergy efficiency 1 is examined via all system powers, exergy and efficiency 2 is calculated according to specific exergy rates of biomass fuels and product gases. While the exergy efficiencies 1 change between 4.33% and 11.89%, exergy efficiencies 2 vary from 18.33% to 39.64%. Also, irreversibilities range from 9.76 to 18.02 MJ/kg. Finally, we investigate how nitrogen contents of biomass fuels affect on energy and exergy efficiencies. The SLF has the highest amount of nitrogen content as 5.64% db while the NPF has the lowest one as 0.14% db. The minimum and maximum exergetic efficiencies belong to the same fuels. Obviously, the higher the nitrogen content the lower the efficiency based on an inverse ratio between exergy efficiency and nitrogen content. (author)

  14. Are larger dental practices more efficient? An analysis of dental services production.

    Science.gov (United States)

    Lipscomb, J; Douglass, C W

    1986-01-01

    Whether cost-efficiency in dental services production increases with firm size is investigated through application of an activity analysis production function methodology to data from a national survey of dental practices. Under this approach, service delivery in a dental practice is modeled as a linear programming problem that acknowledges distinct input-output relationships for each service. These service-specific relationships are then combined to yield projections of overall dental practice productivity, subject to technical and organizational constraints. The activity analysis reported here represents arguably the most detailed evaluation yet of the relationship between dental practice size and cost-efficiency, controlling for such confounding factors as fee and service-mix differences across firms. We conclude that cost-efficiency does increase with practice size, over the range from solo to four-dentist practices. Largely because of data limitations, we were unable to test satisfactorily for scale economies in practices with five or more dentists. Within their limits, our findings are generally consistent with results from the neoclassical production function literature. From the standpoint of consumer welfare, the critical question raised (but not resolved) here is whether these apparent production efficiencies of group practice are ultimately translated by the market into lower fees, shorter queues, or other nonprice benefits. PMID:3102404

  15. Miniature mechanical transfer optical coupler

    Science.gov (United States)

    Abel, Philip [Overland Park, KS; Watterson, Carl [Kansas City, MO

    2011-02-15

    A miniature mechanical transfer (MT) optical coupler ("MMTOC") for optically connecting a first plurality of optical fibers with at least one other plurality of optical fibers. The MMTOC may comprise a beam splitting element, a plurality of collimating lenses, and a plurality of alignment elements. The MMTOC may optically couple a first plurality of fibers disposed in a plurality of ferrules of a first MT connector with a second plurality of fibers disposed in a plurality of ferrules of a second MT connector and a third plurality of fibers disposed in a plurality of ferrules of a third MT connector. The beam splitting element may allow a portion of each beam of light from the first plurality of fibers to pass through to the second plurality of fibers and simultaneously reflect another portion of each beam of light from the first plurality of fibers to the third plurality of fibers.

  16. Overview of the miniaturization technologies

    Science.gov (United States)

    Warrington, Robert O., Jr.

    1995-09-01

    This overview paper will cover the miniaturization technologies as applied to microelectromechanical systems (MEMS) or micromanufacturing. Technologies reviewed will include bulk and surface micromachining of silicon, the high-aspect ratio technologies including deep X-ray lithography (LIGA) and photo sensitive polyimide, and the complementary processes which include micro-drilling, milling, turning, and electrical discharge machining, laser based micromachining and focussed ion beam micromachining. Examples of each of the process technologies will be given and a capabilities comparison among the technologies will be presented. A historical comparison of MEMS with the vlsi industry will be made and the current status and market forecast for these technologies will be presented. A brief comparison of US research with current research in Japan and Europe will be made along with comments about the status of US research, including current research projects at the Institute for Micromanufacturing.

  17. Life cycle energy efficiency and environmental impact assessment of bioethanol production from sweet potato based on different production modes.

    Science.gov (United States)

    Zhang, Jun; Jia, Chunrong; Wu, Yi; Xia, Xunfeng; Xi, Beidou; Wang, Lijun; Zhai, Youlong

    2017-01-01

    The bioethanol is playing an increasingly important role in renewable energy in China. Based on the theory of circular economy, integration of different resources by polygeneration is one of the solutions to improve energy efficiency and to reduce environmental impact. In this study, three modes of bioethanol production were selected to evaluate the life cycle energy efficiency and environmental impact of sweet potato-based bioethanol. The results showed that, the net energy ratio was greater than 1 and the value of net energy gain was positive in the three production modes, in which the maximum value appeared in the circular economy mode (CEM). The environment emission mainly occurred to bioethanol conversion unit in the conventional production mode (CPM) and the cogeneration mode (CGM), and eutrophication potential (EP) and global warming potential (GWP) were the most significant environmental impact category. While compared with CPM and CGM, the environmental impact of CEM significantly declined due to increasing recycling, and plant cultivation unit mainly contributed to EP and GWP. And the comprehensive evaluation score of environmental impact decreased by 73.46% and 23.36%. This study showed that CEM was effective in improving energy efficiency, especially in reducing the environmental impact, and it provides a new method for bioethanol production.

  18. A novel cell factory for efficient production of ethanol from dairy waste

    DEFF Research Database (Denmark)

    Liu, Jianming; Dantoft, Shruti Harnal; Würtz, Anders

    2016-01-01

    contained in residual whey permeate (RWP), by introducing lactose catabolism into a L. lactis strain CS4435 (MG1363 Δ(3) ldh, Δpta, ΔadhE, pCS4268), where the carbon flow has been directed toward ethanol instead of lactate. To achieve growth and ethanol production on RWP, we added corn steep liquor...... hydrolysate (CSLH) as the nitrogen source. The outcome was efficient ethanol production with a titer of 41 g/L and a yield of 70 % of the theoretical maximum using a fed-batch strategy. The combination of a low-cost medium from industrial waste streams and an efficient cell factory should make the developed...... process industrially interesting. A process for the production of ethanol using L. lactis and a cheap renewable feedstock was developed. The results demonstrate that it is possible to achieve sustainable bioconversion of waste products from the dairy industry (RWP) and corn milling industry (CSLH...

  19. Efficient Production of Hydrogen from Decomposition of Formic Acid over Zeolite Incorporated Gold Nanoparticles

    DEFF Research Database (Denmark)

    Gallas-Hulin, Agata; Mielby, Jerrik Jørgen; Kegnæs, Søren

    2016-01-01

    Formic acid has a great potential as a safe and convenient source of hydrogen for sustainable chemical synthesis and renewable energy storage. Here, we report a heterogeneous gold nanoparticles catalyst for efficient production of hydrogen from vapor phase decomposition of formic acid using zeolite...... sintering stability. Based on these results, we believe that incorporation of metal nanoparticles in zeolites may find use as highly active and selective heterogeneous catalysts for the production of hydrogen in future renewable energy applications....

  20. ProSens: integrated production control by automated inspection planning and efficient multisensor metrology

    Science.gov (United States)

    Glaser, Ulf; Li, Zhichao; Bichmann, Stephan, II; Pfeifer, Tilo

    2003-05-01

    By China's entry into the WTO, Chinese as well as German companies are facing the question, how to minimize the risk of unfamiliar cooperation partners when developing products. The rise of customer demands concerning quality, product diversity and the reduction of expenses require flexibility and efficiency with reliable component suppliers. In order to build and strengthen sino-german cooperations, a manufacturing control using homogenized and efficient measures to assure high quality is of vital importance. Lack of unifications may cause identical measurements conducted at subcontractors or customers to be carried out with different measurement processes which leads to incomparable results. Rapidly growing company cooperations and simultaneously decreasing of manufacturing scope cause substantial difficulties when coordinating joint quality control activities. "ProSens," a sino-german project consortium consisting of industrial users, technology producers and research institutes, aims at improving selected production processes by: Creation of a homogeneous quality awareness in sino-german cooperations. Sensitization for process accompanying metrology at an early stage of product development. Increase of the process performance by the use of integrated metrology. Reduction of production time and cost. Unification of quality control of complex products by means of efficient measurement strategies and CAD-based inspection planning.

  1. Industry Efficiency and Total Factor Productivity Growth under Resources and Environmental Constraint in China

    Directory of Open Access Journals (Sweden)

    Feng Tao

    2012-01-01

    Full Text Available The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity.

  2. Environmental trade-offs of pig production systems under varied operational efficiencies.

    Science.gov (United States)

    McAuliffe, G A; Takahashi, T; Mogensen, L; Hermansen, J E; Sage, C L; Chapman, D V; Lee, M R F

    2017-11-01

    Production of pork, the most consumed meat globally, is estimated to emit 668 m tonnes CO2-eq of greenhouse gases each year. Amongst various production systems that comprise the pig industry, grain-based intensive production is widely regarded as the largest polluter of the environment, and thus it is imperative to develop alternative systems that can provide the right balance between sustainability and food security. Using an original dataset from the Republic of Ireland, this paper examines the life-cycle environmental impacts of representative pig farms operating under varying production efficiencies. For the baseline farm with an average production efficiency, global warming potential (GWP), acidification potential (AP) and eutrophication potential (EP) per kg carcass weight departing the slaughterhouse were estimated to be 3.5 kg CO2-eq, 43.8 g SO2-eq and 32.1 g PO4-eq, respectively. For herds with a higher production efficiency, a 9% improvement in feed conversion ratio was met by 6%, 15% and 12% decreases in GWP, EP, AP, respectively. Scenario and sensitivity analyses also revealed that (a) a switch to high-protein diets results in lower GWP and higher AP and EP, and (b) reducing transportation distances by sourcing domestically produced wheat and barley does not lower environmental impacts in any notable manner. To improve cross-study comparability of these findings, results based on an auxiliary functional unit, kg liveweight departing the farm gate, are also reported.

  3. Life cycle efficiency of beef production: VIII. Relationship between residual feed intake of heifers and subsequent cow efficiency ratios.

    Science.gov (United States)

    Davis, M E; Lancaster, P A; Rutledge, J J; Cundiff, L V

    2016-11-01

    Data were collected from 1953 through 1980 from identical and fraternal twin beef and dairy females born in 1953, 1954, 1959, 1964, and 1969, and from crossbred females born as singles in 1974, and their progeny. Numbers of dams that weaned at least 1 calf and were included in the first analysis were 37, 45, and 56 in the 1964, 1969, and 1974 data sets, respectively. Respective numbers of dams that weaned 3 calves and were included in a second analysis were 6, 8, 8, 22, 33, and 33 in the 1953, 1954, 1959, 1964, 1969, and 1974 experiments. Individual feed consumption was measured at 28-d intervals from the time females were placed on the experiment until 3 calves were weaned or the dams had reached 5 yr of age. Residual feed intake (RFI) and residual gain (RG) of the heifers that subsequently became the dams in this study were determined based on ADG and DMI from 240 d of age to first calving. Various measures of cow efficiency were calculated on either a life cycle or actual lifetime basis using ratios of progeny and dam weight outputs to progeny and dam feed inputs. Residual feed intake was phenotypically independent of ADG and metabolic midweight (MMW), whereas the correlation between RFI and DMI was positive and highly significant ( = 0.67; Residual gain was highly correlated with ADG ( = 0.75; calving had superior efficiency ratios as cows. Residual feed intake was not significantly correlated with age at puberty, age at calving, or milk production. Results of this study do not indicate any serious antagonisms of postweaning heifer RFI with subsequent cow and progeny performance traits or with life cycle or actual lifetime cow efficiency. In addition, selection for increased RG would result in earlier ages at calving, but would also tend to result in taller and heavier cows.

  4. Improving Energy Efficiency in the Production Floor Using SoA-Based Monitoring Techniques

    Science.gov (United States)

    Cachapa, Daniel; Harrison, Robert; Colombo, Armando

    Modern manufacturing systems are struggling to remain competitive under the pressures of and increasingly demanding society. The advent of SoA-based production systems is presented as the solution to facing those difficulties. In order to support this new production paradigm, new tools have to be developed for the benefit of the production engineers of who will be implementing and deploying the SoA-based factory floor. This entails the development of Smart Devices, which while being autonomous are able to communicate and cooperate in an open and standardized way with other participants in the production system. These capabilities can be exploited in order to implement a next-generation production monitoring system that is not only able to monitor production status, but also energy usage, eventually leading to much greener and more efficient factories.

  5. On Measurement of Efficiency of Cobb-Douglas Production Function with Additive and Multiplicative Errors

    Directory of Open Access Journals (Sweden)

    Md. Moyazzem Hossain

    2015-02-01

    Full Text Available In developing counties, efficiency of economic development has determined by the analysis of industrial production. An examination of the characteristic of industrial sector is an essential aspect of growth studies. The most of the developed countries are highly industrialized as they brief “The more industrialization, the more development”. For proper industrialization and industrial development we have to study industrial input-output relationship that leads to production analysis. For a number of reasons econometrician’s belief that industrial production is the most important component of economic development because, if domestic industrial production increases, GDP will increase, if elasticity of labor is higher, implement rates will increase and investment will increase if elasticity of capital is higher. In this regard, this paper should be helpful in suggesting the most suitable Cobb-Douglas production function to forecast the production process for some selected manufacturing industries of developing countries like Bangladesh. This paper choose the appropriate Cobb-Douglas function which gives optimal combination of inputs, that is, the combination that enables it to produce the desired level of output with minimum cost and hence with maximum profitability for some selected manufacturing industries of Bangladesh over the period 1978-79 to 2011-2012. The estimated results shows that the estimates of both capital and labor elasticity of Cobb-Douglas production function with additive errors are more efficient than those estimates of Cobb-Douglas production function with multiplicative errors.

  6. India's pulp and paper industry: Productivity and energy efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Schumacher, Katja

    1999-07-01

    Historical estimates of productivity growth in India's pulp and paper sector vary from indicating an improvement to a decline in the sector's productivity. The variance may be traced to the time period of study, source of data for analysis, and type of indices and econometric specifications used for reporting productivity growth. The authors derive both statistical and econometric estimates of productivity growth for this sector. Their results show that productivity declined over the observed period from 1973-74 to 1993-94 by 1.1% p.a. Using a translog specification the econometric analysis reveals that technical progress in India's pulp and paper sector has been biased towards the use of energy and material, while it has been capital and labor saving. The decline in productivity was caused largely by the protection afforded by high tariffs on imported paper products and other policies, which allowed inefficient, small plants to enter the market and flourish. Will these trends continue into the future, particularly where energy use is concerned? The authors examine the current changes in structure and energy efficiency undergoing in the sector. Their analysis shows that with liberalization of the sector, and tighter environmental controls, the industry is moving towards higher efficiency and productivity. However, the analysis also shows that because these improvements are being hampered by significant financial and other barriers the industry might have a long way to go.

  7. Productive efficiency of public and private solid waste logistics and its implications for waste management policy

    Directory of Open Access Journals (Sweden)

    Daisuke Ichinose

    2013-03-01

    Full Text Available This paper measures the productive efficiency of municipal solid waste (MSW logistics by applying data envelopment analysis (DEA to cross-sectional data of prefectures in Japan. Either through public operations or by outsourcing to private waste collection operators, prefectural governments possess the fundamental authority over waste processing operations in Japan. Therefore, we estimate a multi-input multi-output production efficiency at the prefectural level via DEA, employing several different model settings. Our data classify the MSW into household solid waste (HSW and business solid waste (BSW collected by both private and public operators as separate outputs, while the numbers of trucks and workers used by private and public operators are used as inputs. The results consistently show that geographical characteristics, such as the number of inhabited remote islands, are relatively more dominant factors for determining inefficiency. While the implication that a minimum efficient scale is not achieved in these small islands is in line with the literature suggesting that waste logistics has increasing returns at the municipal level, our results indicate that waste collection efficiency in Japan is well described by CRS technology at the prefectural level. The results also show that prefectures with higher private-sector participation, measured in terms of HSW collection, are more efficient, whereas a higher private–labor ratio negatively affects efficiency. We also provide evidence that prefectures with inefficient MSW logistics have a higher tendency of suffering from the illegal dumping of industrial waste.

  8. Eco-efficient environmental policy in oil and gas production in The Netherlands

    NARCIS (Netherlands)

    Huppes, G.; Davidson, M.D.; Kuyper, J.; van Oers, L.; Udo de Haes, H.A.; Warringa, G.

    2007-01-01

    This article presents the quantitative eco-efficiency method developed for prioritising environmental investments in NOGEPA, The Netherlands Oil and Gas Exploration and Production Association involving all major oil and gas producers in The Netherlands. They are committed to a high level of

  9. Zimbabwe commercials banks efficiency and productivity analysis through DEA Malmquist approach: 2002-2012

    Directory of Open Access Journals (Sweden)

    Jacob Muvingi

    2015-04-01

    Full Text Available Majority of data envelopment analysis studies have been focused on developed economies and economies in Asia, and very few studies on developing economies particularly African economies. This research aims to determine bank efficiency and productivity change of Zimbabwean commercial banks. The DEA model was used to measure the efficiency of 10 commercial banks working in Zimbabwe. The intermediation approach was used to specify variables. The average scores of technical efficiency under the Constant Returns to Scale (CRS and Variable Returns to Scale (VRS assumptions for the commercial banking sector as a whole are 70.95% and 81.5% respectively. The average scale efficiency for commercial banks operating in Zimbabwe was found to be 73.7%.Through applying the Malmquist Productivity Index (MPI method; it was found that the mean total factor productivity increase for Zimbabwean commercial banks from 2003 to 2012 is 13.8%. The results also showed that the total factor productivity index peaked in 2009 where it reached a value of 121.1% and reached the lowest point in 2005 were it went down to (-52%.

  10. Product services for a resource-efficient and circular economy - A review

    NARCIS (Netherlands)

    Tukker, A.

    2015-01-01

    Since the 1990s, Product Service Systems (PSS) have been heralded as one of the most effective instruments for moving society towards a resource-efficient, circular economy and creating a much-needed 'resource revolution'. This paper reviews the literature on PSS in the last decade and compares the

  11. Patterns and controls of the variability of radiation use efficiency and primary productivity across terrestrial ecosystems

    NARCIS (Netherlands)

    Garbulsky, M.F.; Peñuelas, J.; Papale, D.; Ardö, J.; Goulden, M.L.; Kiely, G.; Richardson, A.D.; Rotenberg, E.; Veenendaal, E.M.; Filella, I.

    2010-01-01

    Aim The controls of gross radiation use efficiency (RUE), the ratio between gross primary productivity (GPP) and the radiation intercepted by terrestrial vegetation, and its spatial and temporal variation are not yet fully understood. Our objectives were to analyse and synthesize the spatial

  12. Resource Use Efficiency in Part-time Food Crop Production: The ...

    African Journals Online (AJOL)

    In this paper, stochastic frontier production model was used to analyze the resource use efficiency of part-time food crop farmers in Idah, North Central Nigeria. The result shows that farm size, labour and planting materials are significant determinants of farm output in part-time food crop farming. Analysis of inefficiency ...

  13. Bulk packaging for consumer electronics products as a strategy for eco-efficient transportation

    NARCIS (Netherlands)

    Wever, R.; Boks, C.B.; Stevels, A.L.N.

    2006-01-01

    By postponing the packing of consumer electronics (CE) products into their final consumer package, until after long-distance transportation, substantial economic savings and environmental improvements can be achieved, due to higher efficiency during transportation. In such a case, long-distance

  14. Efficiency of resource-use in Cassava production in Edo state, Nigeria

    African Journals Online (AJOL)

    This study employed the use of the Maximum Likelihood Estimation Technique in estimating the efficiency of resource-use in cassava production in Edo State. Data used for the study were sourced through the cost-route method of data collection, based on a stratified random sampling technique. The average farm size of ...

  15. Bulk packaging for consumer electronics products as a strategy for eco-efficient transportation

    NARCIS (Netherlands)

    Wever, R.; Boks, C.B.; Stevels, A.L.N.

    By postponing the packing of consumer electronics (CE) products into their final consumer package, until after long-distance transportation, substantial economic savings and environmental improvements can be achieved, due to higher efficiency during transportation. In such a case, long-distance

  16. HelioTrope: An innovative and efficient prototype for solar power production

    Directory of Open Access Journals (Sweden)

    Papageorgiou George

    2014-01-01

    Full Text Available The solar energy alternative could provide us with all the energy we need as it exist in vast quantities all around us. We only should be innovative enough in order to improve the efficiency of our systems in capturing and converting solar energy in usable forms of power. By making a case for the solar energy alternative, we identify areas where efficiency can be improved and thereby Solar Energy can become a competitive energy source. This paper suggests an innovative approach to solar energy power production, which is manifested in a prototype given the name HelioTrope. The Heliotrope Solar Energy Production prototype is tested on its' capabilities to efficiently covert solar energy to generation of electricity and other forms of energy for storage or direct use. HelioTrope involves an innovative Stirling engine design and a parabolic concentrating dish with a sun tracking system implementing a control algorithm to maximize the capturing of solar energy. Further, it utilizes a patent developed by the authors where a mechanism is designed for the transmission of reciprocating motion of variable amplitude into unidirectional circular motion. This is employed in our prototype for converting linear reciprocating motion into circular for electricity production, which gives a significant increase in efficiency and reduces maintenance costs. Preliminary calculations indicate that the Heliotrope approach constitutes a competitive solution to solar power production.

  17. Phosphorus flows and use efficiencies in production and consumption of wheat, rice and maize in China

    NARCIS (Netherlands)

    Ma, W.; Ma, L.; Li, J.; Wang, F.; Sisák, I.; Zhang, F.

    2011-01-01

    Increasing fertilizer phosphorus (P) application in agriculture has greatly contributed to the increase of crop yields during the last decades in China but it has also increased P flows in food production and consumption. The relationship between P use efficiency and P flow is not well quantified at

  18. Environmental trade-offs of pig production systems under varied operational efficiencies

    DEFF Research Database (Denmark)

    McAuliffe, G. A.; Takahashi, T; Mogensen, Lisbeth

    2017-01-01

    it is imperative to develop alternative systems that can provide the right balance between sustainability and food security. Using an original dataset from the Republic of Ireland, this paper examines the life-cycle environmental impacts of representative pig farms operating under varying production efficiencies...

  19. Radiation use efficiency, biomass production, and grain yield in two maize hybrids differing in drought tolerance

    Science.gov (United States)

    Drought tolerant (DT) maize (Zea mays L.) hybrids have potential to increase yield under drought conditions. However, little information is known about the physiological determinations of yield in DT hybrids. Our objective was to assess radiation use efficiency (RUE), biomass production, and yield ...

  20. Energy efficiency of an innovative vertical axial rotary kiln for pottery production

    Directory of Open Access Journals (Sweden)

    Carlos Andrés Forero Núñez

    2015-01-01

    Full Text Available Colombia is a remarkablecoal producer and exporter worldwide; several sectors use this resource for electricity and thermal energy production. Among them, the ceramic industry consumed 118,590 tons in 2011. Most of the pottery production companies in this country arelocated in rural areas and use old coal fired kilns with low energy efficiencies, generating environmental effects to the population nearby. Despite of the importance of these industries to the small rural economies, the government agencies have closed them due to the lack of development on cleaner devices. This work aims to analyze the thermal behavior of an innovative vertical axial rotary kiln for pottery production, and the energy efficiency varying operation mode. The kiln operated during seven hours needed three hours for stabilizing sintering temperature at 800°C. The mean temperatures of the loading, drying, sintering and cooling stage were 204°C, 223°C, 809°C and 321°C respectively. The convection and radiation heat losses were 15 % whereas the flue gas heat losses 18 %.During continuous operation, the kiln energy efficiency was about 60 %. This design proven to reach the temperatures required in the firing stage of the pottery production; moreover, a gas fuel was fuelled making the process cleaner and more efficient than coal-fired systems.

  1. Assessing the technical efficiency of energy use in different barberry production systems

    NARCIS (Netherlands)

    Mousavi-Avval, Seyed Hashem; Mohammadi, Ali; Rafiee, Shahin; Tabatabaeefar, Ahmad

    The main objectives of this study were to analyze the technical and scale efficiencies of farmers and to identify the wasteful uses of energy in different farm sizes of barberry production in Iran. For these purposes the data envelopment analysis approach was applied to the data of energy use for

  2. Comparative Analysis of Energy Efficiency in Wheat Production in Different Climate Conditions en Europe

    NARCIS (Netherlands)

    Golaszewski, J.; Voort, van der M.P.J.; Meyer-Aurich, A.; Baptista, F.; Balafoutis, A.T.; Mikkola, M.

    2014-01-01

    This paper presents results concerning energy efficiency of wheat production considered in the context of specific energy input variation in different climatic conditions of Europe as well as case studies on implementation of selected energy saving measures in practice. The source data collected

  3. Potential Benefits from Improved Energy Efficiency of KeyElectrical Products: The Case of India

    Energy Technology Data Exchange (ETDEWEB)

    McNeil, Michael; Iyer, Maithili; Meyers, Stephen; Letschert,Virginie; McMahon, James E.

    2005-12-20

    The goal of this project was to estimate the net benefits that cost-effective improvements in energy efficiency can bring to developing countries. The study focused on four major electrical products in the world's second largest developing country, India. These products--refrigerators, room air conditioners, electric motors, and distribution transformers--are important targets for efficiency improvement in India and in other developing countries. India is an interesting subject of study because of it's size and rapid economic growth. Implementation of efficient technologies in India would save billions in energy costs, and avoid hundreds of megatons of greenhouse gas emissions. India also serves as an example of the kinds of improvement opportunities that could be pursued in other developing countries.

  4. JIT maintenance improves the productivity and energy efficiency of the system

    Directory of Open Access Journals (Sweden)

    Marković Željko M.

    2016-01-01

    Full Text Available Maintenance planning in order to ensure the smooth functioning of the system, optimal interaction of system with the environment, and timely responses to the set requirements is one of the most important internal resources of the organization. Just-In-Time Maintenance enables rarely downtime and lower maintenance costs throughout the life cycle of the system, and dramatically increases the productivity and energy efficiency of the entire system. By adopting of the Just-In-Time Maintenance philosophy, minimum of objective function of energy or production system, as well as of production of services system, is achieved.

  5. Increasing the Efficiency of Automation of Production Processes by Reporting the Parameters of the Parts’ Flow

    Directory of Open Access Journals (Sweden)

    Pancho Tomov

    2017-08-01

    Full Text Available In this paper are presented the analysis and the proposal to increasing the efficiency of automation of production processes by reporting the parameters of the parts’ flow. As a main focus are defined the correlation and the dependence between the input and the output parameters of the automated production process. On that basis, the contemporary requirements for development of the production process call for it to be considered as a whole, regardless of the stage in which the process automation is performed.

  6. Treat a new and efficient match algorithm for AI production system

    CERN Document Server

    Miranker, Daniel P

    1988-01-01

    TREAT: A New and Efficient Match Algorithm for AI Production Systems describes the architecture and software systems embodying the DADO machine, a parallel tree-structured computer designed to provide significant performance improvements over serial computers of comparable hardware complexity in the execution of large expert systems implemented in production system form.This book focuses on TREAT as a match algorithm for executing production systems that is presented and comparatively analyzed with the RETE match algorithm. TREAT, originally designed specifically for the DADO machine architect

  7. The effect of equipment efficiency on occurrence of non-conforming products in die casting

    Directory of Open Access Journals (Sweden)

    S. Borkowski

    2010-01-01

    Full Text Available This study focuses on determination of the relationships between equipment efficiency in casting machines and the level of quality. The determination was made based on coefficients of Total Productive Maintenance and r correlation coefficient. The degree at which break-downs and downtime affect the occurrence of non-conforming products was also evaluated. The goal of further investigations is to deter-mine the structure of downtime and finding which downtime types have greatest impact on the quality of die-casting products.

  8. Efficiency of utilization of dietary energy for milk production in lactating crossbred cattle (Bos Indicus

    Directory of Open Access Journals (Sweden)

    Debashis Saha

    2012-09-01

    Full Text Available The present study was conducted on efficiency of utilization of dietary energy for milk production in lactating crossbred cattle. 18 lactating crossbred cattle of early to mid-lactation, approximate body weight (375.39±23.43 kg, milk yield, parity and stage of lactation were divided into three groups of six animals each and were fed 0, 50 and 100% diammonium phosphate (DAP in the mineral mixture of concentrates for 120 days. The chaffed mixed roughage (berseem + wheat straw and concentrate mixture was fed to supply about nearly 18:82 concentrate to roughage ratio on dry matter basis. Tap water was available to the animals twice daily. A metabolism trial of seven days was conducted at the end of experiment to study digestibility of organic nutrients and balances of energy. DAP did not affect the nutrient intake, body weight changes, digestibility of Dry matter (DM, Crude protein (CP, Ether extract (EE, Crude fiber (CF, Nitrogen free extract (NFE and daily milk yield. It was concluded that the at 46.07 Mcal Gross energy intake level the losses in feces, urine, methane and heat production was 45.82%, 5.40%, 4.31% and 33.01%, respectively, and net energy retention for milk production was 11.43%. The gross efficiency of conversion of metabolic energy ME for milk production was 35.69% and the net efficiency of conversion of ME for milk production was 39.56%.

  9. Productivity and Efficiency Measurement of the Danish Centralized Biogas Power Sector

    DEFF Research Database (Denmark)

    Racz, Viktor Jozsef; Vestergaard, Niels

    2016-01-01

    energy based heat and power source by 2050. Theoretically, the centralized biogas combined heat and power plants can play a determinant role in the subsequent Danish energy supply scheme, due to its feature to satisfy base load demand. The productivity and efficiency analysis of the currently operating......The widespread use of the renewable energy sources in the future's energy production is necessary, in order to avoid the predicted environmental, economic and social effects which can be derived from the overuse of fossil fuels. Denmark has announced to be fossil fuel independent with a renewable...... Danish centralizes biogas CHP power plants is crucial in order to study whether there is a most efficient power plant which can be introduced as a “best practice” innovative technology for the future's Danish biogas power plants. In this paper we use the intertemporal Malmquist total factor productivity...

  10. An efficient matrix product operator representation of the quantum chemical Hamiltonian

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Sebastian, E-mail: sebastian.keller@phys.chem.ethz.ch; Reiher, Markus, E-mail: markus.reiher@phys.chem.ethz.ch [ETH Zürich, Laboratory of Physical Chemistry, Vladimir-Prelog-Weg 2, 8093 Zürich (Switzerland); Dolfi, Michele, E-mail: dolfim@phys.ethz.ch; Troyer, Matthias, E-mail: troyer@phys.ethz.ch [ETH Zürich, Institute of Theoretical Physics, Wolfgang-Pauli-Strasse 27, 8093 Zürich (Switzerland)

    2015-12-28

    We describe how to efficiently construct the quantum chemical Hamiltonian operator in matrix product form. We present its implementation as a density matrix renormalization group (DMRG) algorithm for quantum chemical applications. Existing implementations of DMRG for quantum chemistry are based on the traditional formulation of the method, which was developed from the point of view of Hilbert space decimation and attained higher performance compared to straightforward implementations of matrix product based DMRG. The latter variationally optimizes a class of ansatz states known as matrix product states, where operators are correspondingly represented as matrix product operators (MPOs). The MPO construction scheme presented here eliminates the previous performance disadvantages while retaining the additional flexibility provided by a matrix product approach, for example, the specification of expectation values becomes an input parameter. In this way, MPOs for different symmetries — abelian and non-abelian — and different relativistic and non-relativistic models may be solved by an otherwise unmodified program.

  11. An efficient matrix product operator representation of the quantum chemical Hamiltonian

    Science.gov (United States)

    Keller, Sebastian; Dolfi, Michele; Troyer, Matthias; Reiher, Markus

    2015-12-01

    We describe how to efficiently construct the quantum chemical Hamiltonian operator in matrix product form. We present its implementation as a density matrix renormalization group (DMRG) algorithm for quantum chemical applications. Existing implementations of DMRG for quantum chemistry are based on the traditional formulation of the method, which was developed from the point of view of Hilbert space decimation and attained higher performance compared to straightforward implementations of matrix product based DMRG. The latter variationally optimizes a class of ansatz states known as matrix product states, where operators are correspondingly represented as matrix product operators (MPOs). The MPO construction scheme presented here eliminates the previous performance disadvantages while retaining the additional flexibility provided by a matrix product approach, for example, the specification of expectation values becomes an input parameter. In this way, MPOs for different symmetries — abelian and non-abelian — and different relativistic and non-relativistic models may be solved by an otherwise unmodified program.

  12. Enteric methane production from beef cattle that vary in feed efficiency.

    Science.gov (United States)

    Freetly, H C; Brown-Brandl, T M

    2013-10-01

    We hypothesized that CH4 production will decrease with increased feed efficiency. Two experiments were conducted to determine CH4 production of cattle that differed in feed efficiency. Cattle in both studies were selected from larger contemporary groups. Animals furthest from the confidence ellipse that resulted from regressing BW gain on DMI were selected. In the first experiment, 113 crossbred steers were evaluated for feed efficiency for 64 d. Steers were 355 ± 1 d of age and weighed 456 ± 10 kg when they began the study. Steers were fed a ration that consisted of (DM basis) 82.8% corn, 12.8% corn silage, and 4.5% supplement [contains 0.065% monensin, 32% CP (28% NPN), 7.5% Ca, 0.8% P, 4.8% NaCl, 1.8% K, and 55,116 IU/kg vitamin A]. Thirty-seven steers were selected to measure CH4 production. In the second experiment, 197 heifers were evaluated for feed efficiency for 64 d. Heifers were 286 ± 1 d of age and weighed 327 ± 2 kg when they began the study. Heifers were fed a ration that consisted of (DM basis) 60% corn silage, 30% alfalfa hay, and 10% wet distillers grains with solubles. Forty-seven heifers were selected to measure CH4 production. Methane production was measured with respiration calorimeters. In both experiments, cattle had ad libitum access to feed, and DMI consumed during the 24 h before CH4 production was measured. Methane production was collected for a 6-h period on untrained cattle. Consequently, methane production is not a quantitative measure of daily methane production; rather, it is an index value to rank cattle. Multiple regression analysis was used to determine the relationship between either BW gain:DMI ratio or residual feed intake (RFI) on CH4 production after adjusting for the previous 24-h DMI. In the steers, BW gain:DMI ratio and previous 24-h feed intake accounted for little of the variance in CH4 production (R(2) = 0.009), and neither did RFI and previous 24-h feed intake (R(2) = 0.001). In the heifers, the BW gain:DMI ratio

  13. Miniature Dual-Corona Ionizer for Bipolar Charging of Aerosol

    Science.gov (United States)

    Qi, Chaolong; Kulkarni, Pramod

    2015-01-01

    A corona-based bipolar charger has been developed for use in compact, field-portable mobility size spectrometers. The charger employs an aerosol flow cavity exposed to two corona ionizers producing ions of opposite polarity. Each corona ionizer houses two electrodes in parallel needle-mesh configuration and is operated at the same magnitude of corona current. Experimental measurement of detailed charge distribution of near-monodisperse particles of different diameter in the submicrometer size range showed that the charger is capable of producing well-defined, consistent bipolar charge distributions for flow rates up to 1.5 L/min and aerosol concentration up to 107 per cm3. For particles with preexisting charge of +1, 0, and −1, the measured charge distributions agreed well with the theoretical distributions within the range of experimental and theoretical uncertainties. The transmission efficiency of the charger was measured to be 80% for 10 nm particles (at 0.3 L/min and 5 μA corona current) and increased with increasing diameter beyond this size. Measurement of uncharged fractions at various combinations of positive and negative corona currents showed the charger performance to be insensitive to fluctuations in corona current. Ion concentrations under positive and negative unipolar operation were estimated to be 8.2 × 107 and 3.37 × 108 cm−3 for positive and negative ions; the n·t product value under positive corona operation was independently estimated to be 8.5 × 105 s/cm3. The ion concentration estimates indicate the charger to be capable of “neutralizing” typical atmospheric and industrial aerosols in most measurement applications. The miniature size, simple and robust operation makes the charger suitable for portable mobility spectrometers. PMID:26512158

  14. A Miniaturized and Robust FTS Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Vescent Photonics determined the feasibility of a miniaturized, robust, Fourier transform spectrometer (FTS) for either in-situ or remote chemical and spectral...

  15. Miniature Active Space Radiation Dosimeter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Space Micro will extend our Phase I R&D to develop a family of miniature, active space radiation dosimeters/particle counters, with a focus on biological/manned...

  16. Using Miniature Landforms in Teaching Geomorphology.

    Science.gov (United States)

    Petersen, James F.

    1986-01-01

    This paper explores the uses of true landform miniatures and small-scale analogues and suggests ways to teach geomorphological concepts using small-scale relief features as illustrative examples. (JDH)

  17. Miniature Sensor for Aerosol Mass Measurements Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR project seeks to develop a miniature sensor for mass measurement of size-classified aerosols. A cascade impactor will be used to classify aerosol sample...

  18. Miniaturized Airborne Imaging Central Server System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation is a miniaturized airborne imaging central server system (MAICSS). MAICSS is designed as a high-performance computer-based electronic backend that...

  19. Miniaturized Airborne Imaging Central Server System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation is a miniaturized airborne imaging central server system (MAICSS). MAICSS is designed as a high-performance-computer-based electronic backend that...

  20. A Miniaturized and Robust FTS Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Vescent Photonics details a miniaturized and robust Fourier transform spectrometer(FTS) for in-situ chemical and spectral analysis. Phase I research will focus on...

  1. High Performance Miniature Bandpass Filters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal is submitted for developing low impedance, miniature bandpass RF frequency filter via MEMS technique, in applications of SMAP, Aquarius follow-on,...

  2. The effect of work accidents on the efficiency of production in the coal sector

    Directory of Open Access Journals (Sweden)

    Yaşar Kasap

    2011-05-01

    Full Text Available In comparison with other sectors, mining is one of the sectors with the highest rates of work accidents. Such accidents negatively affect a country’s economy by wasting domestic resources and causing losses of both labour force and working days. What distinguishes mining from other branches of industry is that its working environments change continually and the working conditions are particularly harsh. Because of the practice of labour-intensive underground production methods, which leads to an increase in risk factors in terms of work accidents, and the fact that coal is a leading resource in meeting the ever-increasing demand for energy, this study investigated how work accidents affected the efficiency of production in the Turkish Hard Coal Enterprise (TTK between 1987 and 2006. Using data envelopment analysis, the overall sources of technical inefficiency in the years examined were determined. The results from this analysis revealed that the overall technical efficiency was as low as 69.7%, particularly as a result of the disaster in 1992; work accidents therefore had a negative effect on production efficiency. The greatest degree of pure technical inefficiency was found to have occurred in the period between 1992 and 2000, when the highest number of work accidents were noted, whilst the greatest degree of scale inefficiency was found to have occurred between 1987 and 1993. Because TTK has a prominent position among institutions and attaches great importance to workers’ health and safety, an increase was noted in efficiency scores after 1993.

  3. Numerical study of a high-speed miniature centrifugal compressor

    Science.gov (United States)

    Li, Xiaoyi

    A miniature centrifugal compressor is a key component of reverse Brayton cycle cryogenic cooling system. The system is commonly used to generate a low cryogenic temperature environment for electronics to increase their efficiency, or generate, store and transport cryogenic liquids, such as liquid hydrogen and oxygen, where space limit is also an issue. Because of space limitation, the compressor is composed of a radial IGV, a radial impeller and an axial-direction diffuser (which reduces the radial size because of smaller diameter). As a result of reduction in size, rotating speed of the impeller is as high as 313,000 rpm, and Helium is used as the working fluid, in order to obtain the required static pressure ratio/rise. Two main characteristics of the compressor---miniature and high-speed, make it distinct from conventional compressors. Higher compressor efficiency is required to obtain a higher COP (coefficient of performance) system. Even though miniature centrifugal compressors start to draw researchers' attention in recent years, understanding of the performance and loss mechanism is still lacking. Since current experimental techniques are not advanced enough to capture details of flow at miniature scale, numerical methods dominate miniature turbomachinery study. This work numerically studied a high speed miniature centrifugal compressor with commercial CFD code. The overall performance of the compressor was predicted with consideration of interaction between blade rows by using sliding mesh model. The law of similarity of turbomachinery was validated for small scale machines. It was found that the specific ratio effect needs to be considered when similarity law is applied. But Reynolds number effect can be neglected. The loss mechanism of each component was analyzed. Loss due to turning bend was significant in each component. Tip leakage loss of small scale turbomachines has more impact on the impeller performance than that of large scale ones. Because the

  4. Miniaturized GPS/MEMS IMU integrated board

    Science.gov (United States)

    Lin, Ching-Fang (Inventor)

    2012-01-01

    This invention documents the efforts on the research and development of a miniaturized GPS/MEMS IMU integrated navigation system. A miniaturized GPS/MEMS IMU integrated navigation system is presented; Laser Dynamic Range Imager (LDRI) based alignment algorithm for space applications is discussed. Two navigation cameras are also included to measure the range and range rate which can be integrated into the GPS/MEMS IMU system to enhance the navigation solution.

  5. Statistical media design for efficient polyhydroxyalkanoate production in Pseudomonas sp. MNNG-S.

    Science.gov (United States)

    Saranya, V; Rajeswari, V; Abirami, P; Poornimakkani, K; Suguna, P; Shenbagarathai, R

    2016-07-03

    Polyhydroxyalkanoate (PHA) is a promising polymer for various biomedical applications. There is a high need to improve the production rate to achieve end use. When a cost-effective production was carried out with cheaper agricultural residues like molasses, traces of toxins were incorporated into the polymer, which makes it unfit for biomedical applications. On the other hand, there is an increase in the popularity of using chemically defined media for the production of compounds with biomedical applications. However, these media do not exhibit favorable characteristics such as efficient utilization at large scale compared to complex media. This article aims to determine the specific nutritional requirement of Pseudomonas sp. MNNG-S for efficient production of polyhydroxyalkanoate. Response surface methodology (RSM) was used in this study to statistically design for PHA production based on the interactive effect of five significant variables (sucrose; potassium dihydrogen phosphate; ammonium sulfate; magnesium sulfate; trace elements). The interactive effects of sucrose with ammonium sulfate, ammonium sulfate with combined potassium phosphate, and trace element with magnesium sulfate were found to be significant (p < .001). The optimization approach adapted in this study increased the PHA production more than fourfold (from 0.85 g L(-1) to 4.56 g L(-1)).

  6. Light Use Efficiency of Aboveground Biomass Production of Norway Spruce Stands

    Directory of Open Access Journals (Sweden)

    Michal Bellan

    2017-01-01

    Full Text Available Light use efficiency (LUE or photosynthetically active radiation use efficiency in production of young spruce stands aboveground biomass was determined at the study sites Rájec (the Drahanská vrchovina Highland and Bílý Kříž (the Moravian‑Silesian Beskids Mountains in 2014 and 2015. The LUE value obtained for the investigated spruce stands were in the range of 0.45 – 0.65 g DW MJ–1. The different LUE values were determined for highland and mountain spruce stand. The differences were caused by growth and climatic conditions and by the amount of assimilatory apparatus (LAI.

  7. Policy of productive development and energy efficiency; Politica de desenvolvimento produtivo e eficiencia energetica

    Energy Technology Data Exchange (ETDEWEB)

    Naturesa, Jim Silva [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Civil Arquitetura e Urbanismo. Nucleo Interdisciplinar de Planejamento Energetico], e-mail: cam@fec.unicamp.br; Mariotoni, Carlos Alberto [Faculdade Politecnica de Jundiai (FPJ), SP (Brazil). Anhanguera Educacional

    2008-07-01

    The new industry policy in Brazil called PDP (Politica de Desenvolvimento Produtivo) and implications on Brazilian energy efficiency program are discussed. The PINTEC - Industrial Research for Technology Innovation (2003/05) indicates a low R and D and I investment of the Brazilian industries. It is expected that and energy efficiency project can be seen as an innovation project because this brings new equipment and a more advanced knowledge to industry, which helps to reduce electrical energy consumption, consumer' bills and production costs. (author)

  8. Drilling miniature holes, Part III

    Energy Technology Data Exchange (ETDEWEB)

    Gillespie, L.K.

    1978-07-01

    Miniature components for precision electromechanical mechanisms such as switches, timers, and actuators typically require a number of small holes. Because of the precision required, the workpiece materials, and the geometry of the parts, most of these holes must be produced by conventional drilling techniques. The use of such techniques is tedious and often requires considerable trial and error to prevent drill breakage, minimize hole mislocation and variations in hole diameter. This study of eight commercial drill designs revealed that printed circuit board drills produced better locational and size repeatability than did other drills when centerdrilling was not used. Boring holes 1 mm in dia, or less, as a general rule did not improve hole location in brass or stainless steel. Hole locations of patterns of 0.66-mm holes can be maintained within 25.4-..mu..m diametral positional tolerance if setup misalignments can be eliminated. Size tolerances of +- 3.8 ..mu..m can be maintained under some conditions when drilling flat plates. While these levels of precision are possible with existing off-the-shelf drills, they may not be practical in many cases.

  9. Increased light-use efficiency sustains net primary productivity of shaded coffee plants in agroforestry system.

    Science.gov (United States)

    Charbonnier, Fabien; Roupsard, Olivier; le Maire, Guerric; Guillemot, Joannès; Casanoves, Fernando; Lacointe, André; Vaast, Philippe; Allinne, Clémentine; Audebert, Louise; Cambou, Aurélie; Clément-Vidal, Anne; Defrenet, Elsa; Duursma, Remko A; Jarri, Laura; Jourdan, Christophe; Khac, Emmanuelle; Leandro, Patricia; Medlyn, Belinda E; Saint-André, Laurent; Thaler, Philippe; Van Den Meersche, Karel; Barquero Aguilar, Alejandra; Lehner, Peter; Dreyer, Erwin

    2017-08-01

    In agroforestry systems, shade trees strongly affect the physiology of the undergrown crop. However, a major paradigm is that the reduction in absorbed photosynthetically active radiation is, to a certain extent, compensated by an increase in light-use efficiency, thereby reducing the difference in net primary productivity between shaded and non-shaded plants. Due to the large spatial heterogeneity in agroforestry systems and the lack of appropriate tools, the combined effects of such variables have seldom been analysed, even though they may help understand physiological processes underlying yield dynamics. In this study, we monitored net primary productivity, during two years, on scales ranging from individual coffee plants to the entire plot. Absorbed radiation was mapped with a 3D model (MAESPA). Light-use efficiency and net assimilation rate were derived for each coffee plant individually. We found that although irradiance was reduced by 60% below crowns of shade trees, coffee light-use efficiency increased by 50%, leaving net primary productivity fairly stable across all shade levels. Variability of aboveground net primary productivity of coffee plants was caused primarily by the age of the plants and by intraspecific competition among them (drivers usually overlooked in the agroforestry literature) rather than by the presence of shade trees. © 2017 John Wiley & Sons Ltd.

  10. Phosphorus flows and use efficiencies in production and consumption of wheat, rice, and maize in China.

    Science.gov (United States)

    Ma, Wenqi; Ma, Lin; Li, Jianhui; Wang, Fanghao; Sisák, István; Zhang, Fusuo

    2011-08-01

    Increasing fertilizer phosphorus (P) application in agriculture has greatly contributed to the increase of crop yields during the last decades in China but it has also increased P flows in food production and consumption. The relationship between P use efficiency and P flow is not well quantified at national level. In present paper we report on P flows and P use efficiencies in rice, wheat, and maize production in China using the NUFER model. Conservation strategies for P utilization and the impact of these strategies on P use efficiency have been evaluated. Total amounts of P input to wheat, rice, and maize fields were 1095, 1240, and 1128 Gg, respectively, in China, approximately 80% of which was in chemical fertilizers. The accumulation of P annually in the fields of wheat, rice, and maize was 29.4, 13.6, and 21.3 kg ha(-1), respectively. Phosphorus recovered in the food products of wheat, rice, and maize accounted for only 12.5%, 13.5%, and 3.8% of the total P input, or 3.2%, 2.6%, and 0.9% of the applied fertilizer P, respectively. The present study shows that optimizing phosphorus flows and decreasing phosphorus losses in crop production and utilization through improved nutrient management must be considered as an important issue in the development of agriculture in China. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. Effect of culture density on biomass production and light utilization efficiency of Synechocystis sp. PCC 6803.

    Science.gov (United States)

    Straka, Levi; Rittmann, Bruce E

    2018-02-01

    The viability of large-scale microalgae cultivation depends on providing optimal growth conditions, for which a key operational parameter is culture density. Using Synechocystis sp. PCC 6803, we conducted a series of fixed-density, steady-state experiments and one batch-growth experiment to investigate the role of culture density on biomass production and light utilization efficiency. In all cases, the fixed-density, steady-state experiments and batch-growth experiment showed good agreement. The highest biomass production rates (260 mg L -1  d -1 ) and efficiency for converting light energy to biomass (0.80 μg (μmol photons) -1 ) occurred together at a culture density near 760 mg L -1 , which approximately corresponded to the lowest culture density where almost all incident light was absorbed. The ratio of OD 680 /OD 735 increased with culture density up to the point of maximum productivity, where it plateaued (at a value of 2.4) for higher culture densities. This change in OD 680 /OD 735 indicates a photoacclimation effect that depended on culture density. Very high culture densities led to a sharp decline in efficiency of biomass production per photons absorbed, likely due to a combination of increased decay relative to growth, metabolic changes due to cell-cell interactions, and photodamage due to mixing between regions with high light intensity and zero light intensity. © 2017 Wiley Periodicals, Inc.

  12. Eco-efficient waste glass recycling: Integrated waste management and green product development through LCA.

    Science.gov (United States)

    Blengini, Gian Andrea; Busto, Mirko; Fantoni, Moris; Fino, Debora

    2012-05-01

    As part of the EU Life + NOVEDI project, a new eco-efficient recycling route has been implemented to maximise resources and energy recovery from post-consumer waste glass, through integrated waste management and industrial production. Life cycle assessment (LCA) has been used to identify engineering solutions to sustainability during the development of green building products. The new process and the related LCA are framed within a meaningful case of industrial symbiosis, where multiple waste streams are utilised in a multi-output industrial process. The input is a mix of rejected waste glass from conventional container glass recycling and waste special glass such as monitor glass, bulbs and glass fibres. The green building product is a recycled foam glass (RFG) to be used in high efficiency thermally insulating and lightweight concrete. The environmental gains have been contrasted against induced impacts and improvements have been proposed. Recovered co-products, such as glass fragments/powders, plastics and metals, correspond to environmental gains that are higher than those related to landfill avoidance, whereas the latter is cancelled due to increased transportation distances. In accordance to an eco-efficiency principle, it has been highlighted that recourse to highly energy intensive recycling should be limited to waste that cannot be closed-loop recycled. Copyright © 2011 Elsevier Ltd. All rights reserved.

  13. Eco-efficiency of intensification scenarios for milk production in New Zealand

    Energy Technology Data Exchange (ETDEWEB)

    Basset-Mens, Claudine; Ledgard, Stewart; Boyes, Mark [AgResearch Limited, Ruakura Research Centre, East Street, Private Bag 3123, Hamilton (New Zealand)

    2009-04-15

    New Zealand (NZ) dairy farms used to be the lowest input and most efficient dairy farms of the world. However, intensification of the traditional pasture-based system has occurred over the last decade and has not always been accompanied by increased efficiency. The purpose of this paper is to produce an updated reference of the eco-efficiency of NZ dairy farm systems and to analyse the implications of intensification on their eco-efficiency. Results for an average NZ dairy farm system were compared with those for three dairy farmlet systems representing a wide range in intensification practices. A low input system (LI) (no N fertiliser, no brought-in feed supplement, stocking rate of 2.3 cows/ha) was compared with an N-fertilised farm system (NF) (170 kg fertiliser-N/ha/year, 3 cows/ha) representing a first level of intensification and with an N-fertilised and maize silage supplemented system (NFMS) (170 kg fertiliser-N/ha/year, 13 t DM maize silage/ha/year, 5.2 cows/ha), representing a possible future intensification option. Their eco-efficiency in terms of milk production and land use was compared using Life Cycle Assessment (LCA) methodology. NZ dairy farm systems rely on favourable temperate climate conditions and long-term perennial ryegrass/white clover pasture, to achieve eco-efficient milk production and land use compared to European systems. However, intensification of NZ dairy farms was shown to be detrimental to their eco-efficiency in terms both of milk production and land use functions and could greatly reduce their advantage compared to European systems. The eco-efficiency of LI was very high whatever the functional unit which is remarkable from an LCA perspective. NF and NFMS had a similar eco-efficiency except for energy use which corresponded to the most critical hot spot of NFMS. All studied NZ systems presented some areas for improvement where some new technologies available for dairy farms might play a promising role in the future. Finally, it

  14. High Carbon Use Efficiency is Not Explained by Production of Storage Compounds

    Science.gov (United States)

    Dijkstra, Paul; van Groenigen, Kees-Jan

    2015-04-01

    The efficiency with which microbes use substrate to make new microbial biomass (Carbon Use Efficiency or CUE; mol C / mol C) is an important variable in soil and ecosystem C cycling models. Estimates of CUE in soil microbial communities vary widely. It has been hypothesized that high values of CUE are associated with production of storage compounds following a sudden increases in substrate availability during CUE measurements. In that case, these high CUE values would not be representative for balanced microbial growth (i.e. the production of all compounds needed to make new microbial cells). To test this hypothesis, we added position-specific 13C-labeled glucose isotopomers in parallel incubations of a ponderosa pine and piñon-juniper soil. We compared the measured pattern of CO2 release for the six glucose C atoms with patterns of CO2 production expected for balanced growth with a low, medium, or high CUE, and with CO2 production patterns associated with production of storage compounds (glycogen, lipids, or polyhydroxybutyrate). The measured position-specific CO2 production did not match that for production of glycogen, lipids, or polyhydroxybutyrate, but agreed closely with that expected for balanced growth at high CUE and high pentose phosphate pathway activity. We conclude that soil microbial communities utilize glucose substrate for biomass growth with high CUE, and that addition of small amounts of 13C-labeled glucose tracers do not affect CUE or induce storage compounds production. We submit that the measurement of position-specific CO2 production offers a quick and easy way to test biochemically explicit hypotheses concerning microbial growth metabolism.

  15. High-efficiency hydrogen production by an anaerobic, thermophilic enrichment culture from an Icelandic hot spring.

    Science.gov (United States)

    Koskinen, Perttu E P; Lay, Chyi-How; Puhakka, Jaakko A; Lin, Ping-Jei; Wu, Shu-Yii; Orlygsson, Jóhann; Lin, Chiu-Yue

    2008-11-01

    Dark fermentative hydrogen production from glucose by a thermophilic culture (33HL), enriched from an Icelandic hot spring sediment sample, was studied in two continuous-flow, completely stirred tank reactors (CSTR1, CSTR2) and in one semi-continuous, anaerobic sequencing batch reactor (ASBR) at 58 degrees C. The 33HL produced H2 yield (HY) of up to 3.2 mol-H2/mol-glucose along with acetate in batch assay. In the CSTR1 with 33HL inoculum, H2 production was unstable. In the ASBR, maintained with 33HL, the H2 production enhanced after the addition of 6 mg/L of FeSO4 x H2O resulting in HY up to 2.51 mol-H2/mol-glucose (H2 production rate (HPR) of 7.85 mmol/h/L). The H2 production increase was associated with an increase in butyrate production. In the CSTR2, with ASBR inoculum and FeSO4 supplementation, stable, high-rate H2 production was obtained with HPR up to 45.8 mmol/h/L (1.1 L/h/L) and HY of 1.54 mol-H2/mol-glucose. The 33HL batch enrichment was dominated by bacterial strains closely affiliated with Thermobrachium celere (99.8-100%). T. celere affiliated strains, however, did not thrive in the three open system bioreactors. Instead, Thermoanaerobacterium aotearoense (98.5-99.6%) affiliated strains, producing H2 along with butyrate and acetate, dominated the reactor cultures. This culture had higher H2 production efficiency (HY and specific HPR) than reported for mesophilic mixed cultures. Further, the thermophilic culture readily formed granules in CSTR and ASBR systems. In summary, the thermophilic culture as characterized by high H2 production efficiency and ready granulation is considered very promising for H2 fermentation from carbohydrates.

  16. Catalytic reactive separation system for energy-efficient production of cumene

    Science.gov (United States)

    Buelna, Genoveva [Nuevo Laredo, MX; Nenoff, Tina M [Albuquerque, NM

    2009-07-28

    The present invention relates to an atmospheric pressure, reactive separation column packed with a solid acid zeolite catalyst for producing cumene from the reaction of benzene with propylene. Use of this un-pressurized column, where simultaneous reaction and partial separation occur during cumene production, allow separation of un-reacted, excess benzene from other products as they form. This high-yielding, energy-efficient system allows for one-step processing of cumene, with reduced need for product purification. Reacting propylene and benzene in the presence of beta zeolite catalysts generated a selectivity greater than 85% for catalytic separation reactions at a reaction temperature of 115 degrees C and at ambient pressure. Simultaneously, up to 76% of un-reacted benzene was separated from the product; which could be recycled back to the reactor for re-use.

  17. Radical production efficiency and electrical characteristics of a coplanar barrier discharge built by multilayer ceramic technology

    Science.gov (United States)

    Jõgi, Indrek; Erme, Kalev; Levoll, Erik; Stamate, Eugen

    2017-11-01

    The present study investigated the electrical characteristics and radical production efficiency of a coplanar barrier discharge (CBD) device manufactured by Kyocera by multilayer ceramic technology. The device consisted of a number of linear electrodes with electrode and gap widths of 0.75 mm, immersed into a ceramic dielectric barrier. A closed flow-through system necessary for the measurements was prepared by placing a quartz plate at a height of 3 mm from the ceramic barrier. The production of nitrogen radicals was determined from the removal of a trace amount of NO in pure N2 gas, while the production of oxygen radicals was determined by ozone production in pure O2 or synthetic air. The production efficiency of N and O radicals and NO oxidation in synthetic air was comparable with the efficiency of a volume barrier discharge device. The power density per unit of surface area of the CBD device was more than two times larger than that of a similar volume barrier discharge setup, which makes the CBD device a compact alternative for gas treatment. The production of ozone and different nitrogen oxides was also evaluated for the open system of the CBD which is usable for surface treatment. The ozone concentration of this system was nearly independent from the input power, while the concentration of nitrogen oxides increased with input power. The open system of the CBD was additionally tested for the treatment of a silicon surface. An increase of applied power decreased the time required to reduce the water contact angle below 10 degrees but also started to have an impact on the surface roughness.

  18. EVALUATION OF THERMAL EFFICIENCY OF THE TECHNOLOGICAL SCHEME OF APPLE CHIPS AND DRIED FRUITS PRODUCTION

    Directory of Open Access Journals (Sweden)

    G. V. Kalashnikov

    2014-01-01

    Full Text Available The estimation of thermodynamic perfection of separate technological processes is executed at heat-moisture of handling of fruit and a line of manufacture of fruit apple chips and dried fruits. The technological scheme of a line of processing of fruits and manufactures of fruit chips on the basis of convection and the microwave-dryings suggested resource-saving. The technique is made and results of calculation of thermal expenses for various schemes of manufacture of apple chips are resulted. For the offered scheme material, thermal and power streams on the basis of balance parities of technological processes are certain. The comparative thermal production efficiency of apple chips for a base foreign variant and the offered technological scheme with the closed cycle of use of the heat-carrier and the combined convection-microwave-drying is shown. In this paper we define the thermal and energy flows for the processes of convective drying, pre-microwave drying, hydrothermal treatment and final microwave drying plant material, which are one of the main stages of the production of all kinds of fruit and vegetable concentrates, including fruit apple chips. Resource-saving ways moisture-heat of handling (hydration, blanching, drying, etc. produce raw materials in the production of food concentrates suggested a reduced water flow with a high degree of use of its potential power and microwave sources. To assess the thermal efficiency of the various processes and production schemes used as indicators of thermal efficiency and proposed value of specific heat (kJ / kg given mass productivity per unit of feedstock and translational moisture. The values of the mass fraction of the heat of material flows for the base and the proposed resource-saving production scheme fruit chips, for example, apple, based on a combination of convection-microwave drying each control surface.

  19. Metabolic engineering and adaptive evolution for efficient production of D-lactic acid in Saccharomyces cerevisiae.

    Science.gov (United States)

    Baek, Seung-Ho; Kwon, Eunice Y; Kim, Yong Hwan; Hahn, Ji-Sook

    2016-03-01

    There is an increasing demand for microbial production of lactic acid (LA) as a monomer of biodegradable poly lactic acid (PLA). Both optical isomers, D-LA and L-LA, are required to produce stereocomplex PLA with improved properties. In this study, we developed Saccharomyces cerevisiae strains for efficient production of D-LA. D-LA production was achieved by expressing highly stereospecific D-lactate dehydrogenase gene (ldhA, LEUM_1756) from Leuconostoc mesenteroides subsp. mesenteroides ATCC 8293 in S. cerevisiae lacking natural LA production activity. D-LA consumption after glucose depletion was inhibited by deleting DLD1 encoding D-lactate dehydrogenase and JEN1 encoding monocarboxylate transporter. In addition, ethanol production was reduced by deleting PDC1 and ADH1 genes encoding major pyruvate decarboxylase and alcohol dehydrogenase, respectively, and glycerol production was eliminated by deleting GPD1 and GPD2 genes encoding glycerol-3-phosphate dehydrogenase. LA tolerance of the engineered D-LA-producing strain was enhanced by adaptive evolution and overexpression of HAA1 encoding a transcriptional activator involved in weak acid stress response, resulting in effective D-LA production up to 48.9 g/L without neutralization. In a flask fed-batch fermentation under neutralizing condition, our evolved strain produced 112.0 g/L D-LA with a yield of 0.80 g/g glucose and a productivity of 2.2 g/(L · h).

  20. Biomass production and water use efficiency in perennial grasses during and after drought stress

    DEFF Research Database (Denmark)

    Sørensen, Kirsten Kørup; Lærke, Poul Erik; Sørensen, Helle Baadsgaard

    2018-01-01

    be suitable for assessment of drought stress. There were indications of positive associations between plants carbon isotope composition and water use efficiency (WUE) as well as DM under well-watered conditions. Compared to control, drought-treated plots showed increased growth in the period after drought...... stress. Thus, the drought events did not affect total biomass production (DMtotal) of the whole growing season. During drought stress and the whole growing season, WUE was higher in drought-treated compared to control plots, so it seems possible to save water without loss of biomass. Across soil types, M......Drought is a great challenge to agricultural production, and cultivation of drought-tolerant or water use-efficient cultivars is important to ensure high biomass yields for bio-refining and bioenergy. Here, we evaluated drought tolerance of four C3 species, Dactylis glomerata cvs. Sevenop and Amba...

  1. Future consequences of decreasing marginal production efficiency in the high-yielding dairy cow.

    Science.gov (United States)

    Moallem, U

    2016-04-01

    The objectives were to examine the gross and marginal production efficiencies in high-yielding dairy cows and the future consequences on dairy industry profitability. Data from 2 experiments were used in across-treatments analysis (n=82 mid-lactation multiparous Israeli-Holstein dairy cows). Milk yields, body weights (BW), and dry matter intakes (DMI) were recorded daily. In both experiments, cows were fed a diet containing 16.5 to 16.6% crude protein and net energy for lactation (NEL) at 1.61 Mcal/kg of dry matter (DM). The means of milk yield, BW, DMI, NEL intake, and energy required for maintenance were calculated individually over the whole study, and used to calculate gross and marginal efficiencies. Data were analyzed in 2 ways: (1) simple correlation between variables; and (2) cows were divided into 3 subgroups, designated low, moderate, and high DMI (LDMI, MDMI, and HDMI), according to actual DMI per day: ≤ 26 kg (n=27); >26 through 28.2 kg (n=28); and >28.2 kg (n=27). The phenotypic Pearson correlations among variables were analyzed, and the GLM procedure was used to test differences between subgroups. The relationships between milk and fat-corrected milk yields and the corresponding gross efficiencies were positive, whereas BW and gross production efficiency were negatively correlated. The marginal production efficiency from DM and energy consumed decreased with increasing DMI. The difference between BW gain as predicted by the National Research Council model (2001) and the present measurements increased with increasing DMI (r=0.68). The average calculated energy balances were 1.38, 2.28, and 4.20 Mcal/d (standard error of the mean=0.64) in the LDMI, MDMI, and HDMI groups, respectively. The marginal efficiency for milk yields from DMI or energy consumed was highest in LDMI, intermediate in MDMI, and lowest in HDMI. The predicted BW gains for the whole study period were 22.9, 37.9, and 75.8 kg for the LDMI, MDMI, and HDMI groups, respectively. The

  2. Estimation efficiency of usage satellite derived and modelled biophysical products for yield forecasting

    Science.gov (United States)

    Kolotii, Andrii; Kussul, Nataliia; Skakun, Sergii; Shelestov, Andrii; Ostapenko, Vadim; Oliinyk, Tamara

    2015-04-01

    Efficient and timely crop monitoring and yield forecasting are important tasks for ensuring of stability and sustainable economic development [1]. As winter crops pay prominent role in agriculture of Ukraine - the main focus of this study is concentrated on winter wheat. In our previous research [2, 3] it was shown that usage of biophysical parameters of crops such as FAPAR (derived from Geoland-2 portal as for SPOT Vegetation data) is far more efficient for crop yield forecasting to NDVI derived from MODIS data - for available data. In our current work efficiency of usage such biophysical parameters as LAI, FAPAR, FCOVER (derived from SPOT Vegetation and PROBA-V data at resolution of 1 km and simulated within WOFOST model) and NDVI product (derived from MODIS) for winter wheat monitoring and yield forecasting is estimated. As the part of crop monitoring workflow (vegetation anomaly detection, vegetation indexes and products analysis) and yield forecasting SPIRITS tool developed by JRC is used. Statistics extraction is done for landcover maps created in SRI within FP-7 SIGMA project. Efficiency of usage satellite based and modelled with WOFOST model biophysical products is estimated. [1] N. Kussul, S. Skakun, A. Shelestov, O. Kussul, "Sensor Web approach to Flood Monitoring and Risk Assessment", in: IGARSS 2013, 21-26 July 2013, Melbourne, Australia, pp. 815-818. [2] F. Kogan, N. Kussul, T. Adamenko, S. Skakun, O. Kravchenko, O. Kryvobok, A. Shelestov, A. Kolotii, O. Kussul, and A. Lavrenyuk, "Winter wheat yield forecasting in Ukraine based on Earth observation, meteorological data and biophysical models," International Journal of Applied Earth Observation and Geoinformation, vol. 23, pp. 192-203, 2013. [3] Kussul O., Kussul N., Skakun S., Kravchenko O., Shelestov A., Kolotii A, "Assessment of relative efficiency of using MODIS data to winter wheat yield forecasting in Ukraine", in: IGARSS 2013, 21-26 July 2013, Melbourne, Australia, pp. 3235 - 3238.

  3. Infrared microsensor payload for miniature unmanned aerial vehicles

    Science.gov (United States)

    Kostrzewa, Joseph; Meyer, William H.; Laband, Stan; Terre, William A.; Petrovich, Peter; Swanson, Kyle; Sundra, Carrie; Sener, Ward; Wilmott, Jay

    2003-09-01

    Miniature unmanned aerial vehicles (UAVs) are a category of aircraft small enough to be transported, launched, operated, and retrieved by a crew of one or two. The concept is not new, having been in limited use by the U.S. military over the past fifteen years, but interest in potential applications is growing as size and cost of the vehicles come down. An application that is particularly significant to the military and law-enforcement agencies is remote reconnaissance, with one or more onboard sensors transmitting data back to the operator(s) in real time. Typically, a miniature UAV is capable of flying a pre-programmed route autonomously, with manual override as an option. At the conclusion of the mission, the vehicle returns for landing, after which it can be quickly disassembled and stowed until its next use. Thermal imaging extends the utility of miniature UAVs to operations in complete darkness and limited visibility, but historically thermal imagers have been too large and heavy for this application. That changed in 1999 with the introduction of Indigo System's AlphaTM camera, which established a new class of thermal imaging product termed the infrared "microsensor". Substantially smaller and lighter than any other infrared imaging product available at the time, AlphaTMwas the first camera that could be readily packaged into the nose of a miniature UAV. Its low power consumption was also a key enabling feature. Building upon the success of AlphaTM, Indigo then took the microsensor class a step further with its OmegaTM camera, which broke all the records established by AlphaTM for small size, weight, and power. OmegaTM has been successfully integrated into several miniature UAVs, including AeroVironment's Pointer and Raven, as well as the Snake Eye UAV manufactured by BAI Aerosystems. Aspects of the OmegaTM design that have led to its utility on these and other platforms are described, and future prospects for even smaller microsensors are discussed.

  4. Utilization of squid pen for the efficient production of chitosanase and antioxidants through prolonged autoclave treatment.

    Science.gov (United States)

    Wang, San-Lang; Wu, Pei-Chen; Liang, Tzu-Wen

    2009-05-26

    We have developed a culture system for efficient production of chitosanase by Bacillus sp. TKU004. TKU004 was cultivated by using squid pen powder as the sole carbon/nitrogen source. The effects of autoclave treatments of the medium on the production of chitosanase were investigated. Autoclave treatment of squid pen powder for 45 min remarkably promoted enzyme productivity. When the culture medium containing an initial squid pen powder concentration of 3% was autoclaved for 45 min, the chitosanase activity was optimal and reached 0.14-0.16 U/mL. In addition, extracellular surfactant-stable chitosanase was purified from the TKU004 culture supernatant. The antioxidant activity of TKU004 culture supernatant was determined through the scavenging ability of DPPH, with 70% per mL. With this method, we have shown that marine wastes can be utilized efficiently through prolonged autoclave treatments to generate a high value-added product, and have revealed its hidden potential in the production of functional foods.

  5. India's cement industry: Productivity, energy efficiency and carbon emissions

    Energy Technology Data Exchange (ETDEWEB)

    Schumacher, Katja; Sathaye, Jayant

    1999-07-01

    Historical estimates of productivity growth in India's cement sector vary from indicating an improvement to a decline in the sector's productivity. The variance may be traced to the time period of study, source of data for analysis, and type of indices and econometric specifications used for reporting productivity growth. Analysis shows that in the twenty year period, 1973 to 1993, productivity in the aluminum sector increased by 0.8% per annum. An econometric analysis reveals that technical progress in India's cement sector has been biased towards the use of energy and capital, while it has been material and labor saving. The increase in productivity was mainly driven by a period of progress between 1983 and 1991 following partial decontrol of the cement sector in 1982. The authors examine the current changes in structure and energy efficiency in the sector. Their analysis shows that the Indian cement sector is moving towards world-best technology, which will result in fewer carbon emissions and more efficient energy use. However, substantial further energy savings and carbon reduction potentials still exist.

  6. THE DESIGN OF AN INFORMATIC MODEL TO ESTIMATE THE EFFICIENCY OF AGRICULTURAL VEGETAL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Cristina Mihaela VLAD

    2013-12-01

    Full Text Available In the present exists a concern over the inability of the small and medium farms managers to accurately estimate and evaluate production systems efficiency in Romanian agriculture. This general concern has become even more pressing as market prices associated with agricultural activities continue to increase. As a result, considerable research attention is now orientated to the development of economical models integrated in software interfaces that can improve the technical and financial management. Therefore, the objective of this paper is to present an estimation and evaluation model designed to increase the farmer’s ability to measure production activities costs by utilizing informatic systems.

  7. A basic design for a multicriteria approach to efficient bioenergy production at regional level

    Energy Technology Data Exchange (ETDEWEB)

    Hagen, Zoe [Technische Univ. Berlin (Germany). Environmental Assessment and Policy Research Group

    2011-07-01

    In Germany, the economic influence created by government policy to push the growth of renewable energies leads to a rapid increase in energy crop cultivation. Possible conflicts between sustainability goals in the area of nature and soil conservation, as well as water pollution control on the one hand and goals associated with the development of renewable energies (such as greenhouse gas (GHG) reduction and the securing of energy supplies) on the other are rarely considered in the planning procedure. This article looks at different approaches to assessment and planning methods on a site-specific level. It then explains the methodology of the project ''Efficient Bio-Energy in the Perspective of Nature Conservation-Assessment and recommendations to protect biodiversity and climate'', which aims to establish a prerequisite for a sustainable and efficient assessment of energy crop cultivation for decentralized energy production in Germany. An integrated methodology was developed, taking into account the three main requirements of agricultural profitability, GHG efficiency, and environmental sustainability of energy crop cultivation for decentralized energy production on a small-scale level. Using ArcGIS, the results can be displayed and regional aspects can be considered by overlaying and intersecting the individual output of all three requirements. This allows the definition of ''no-go'' areas as well as the overall estimation of maximum sustainable production capacity for each energy and crop/energy path in a specific region. It enables an estimation of the profitability and GHG efficiency of energy crop cultivation at regional or communal level under consideration of environmental sustainability. The article ends with the discussion of its possible contribution to the estimation of suitability and unsuitability of landscape areas for energy production paths and provides suggestions for the planning system and policies. (orig.)

  8. JIT maintenance improves the productivity and energy efficiency of the system

    OpenAIRE

    Marković Željko M.; Pendić Zoran R.; Jakovljević Bojana B.; Strižak-Janjušević Marina Z.

    2016-01-01

    Maintenance planning in order to ensure the smooth functioning of the system, optimal interaction of system with the environment, and timely responses to the set requirements is one of the most important internal resources of the organization. Just-In-Time Maintenance enables rarely downtime and lower maintenance costs throughout the life cycle of the system, and dramatically increases the productivity and energy efficiency of the entire system. By adopting of the Just-In-Time Maintenance phi...

  9. The Efficiency of Defect Production in Planar Superconductors and Liquid Crystals

    OpenAIRE

    Rivers, R. J.; A. Swarup

    2003-01-01

    A recent experiment that sees the spontaneous creation of magnetic flux on quenching high-$T_c$ films has shown that earlier null results were a consequence of the lack of saturation of the Zurek-Kibble causal bounds against which flux density was measured. In this letter we estimate how efficient the production of topological charge is in planar systems, both for the aforementioned experiment (when flux measures topological charge) and for an earlier experiment on planar liquid crystals. Agr...

  10. Novel strategies for biobased feedstock utilization: Efficiency, optimization and production of a platform chemical

    OpenAIRE

    Koopman, F.W.

    2010-01-01

    Due to evident environmental, economical and political reasons, it is becoming inevitable to shift society’s dependence away from fossil towards renewable, bio-based resources. However, for efficient implementation of biobased resources, cost effectiveness is key. In this thesis, different possibilities were investigated that may contribute to the economical and technical feasibility of employing (lignocellulosic) biomass as feedstock for chemicals production. In Chapter 2, P. putida S12 was ...

  11. Development of an eco- and material-efficient pellet production chain—a chemical study

    OpenAIRE

    Kuokkanen, M

    2013-01-01

    Abstract According to the EU’s strategy and the corresponding Finnish national strategy on waste materials, all kinds of waste must be utilised primarily as material (reuse, recycling) and secondarily as energy, and at the lowest level of waste hierarchy is their disposal using environmentally friendly methods. Today material efficiency is an essential topic in promoting sustainable use of natural resources, industrial by-products and waste material. The present goal proposed by the EU se...

  12. Hydrogen production methods efficiency coupled to an advanced high temperature accelerator driven system

    Energy Technology Data Exchange (ETDEWEB)

    Rodríguez, Daniel González; Lira, Carlos Alberto Brayner de Oliveira [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Energia Nuclear; Fernández, Carlos García, E-mail: danielgonro@gmail.com, E-mail: mmhamada@ipen.br [Instituto Superior de Tecnologías y Ciencias aplicadas (InSTEC), La Habana (Cuba)

    2017-07-01

    The hydrogen economy is one of the most promising concepts for the energy future. In this scenario, oil is replaced by hydrogen as an energy carrier. This hydrogen, rather than oil, must be produced in volumes not provided by the currently employed methods. In this work two high temperature hydrogen production methods coupled to an advanced nuclear system are presented. A new design of a pebbled-bed accelerator nuclear driven system called TADSEA is chosen because of the advantages it has in matters of transmutation and safety. For the conceptual design of the high temperature electrolysis process a detailed computational fluid dynamics model was developed to analyze the solid oxide electrolytic cell that has a huge influence on the process efficiency. A detailed flowsheet of the high temperature electrolysis process coupled to TADSEA through a Brayton gas cycle was developed using chemical process simulation software: Aspen HYSYS®. The model with optimized operating conditions produces 0.1627 kg/s of hydrogen, resulting in an overall process efficiency of 34.51%, a value in the range of results reported by other authors. A conceptual design of the iodine-sulfur thermochemical water splitting cycle was also developed. The overall efficiency of the process was calculated performing an energy balance resulting in 22.56%. The values of efficiency, hydrogen production rate and energy consumption of the proposed models are in the values considered acceptable in the hydrogen economy concept, being also compatible with the TADSEA design parameters. (author)

  13. High-efficiency nuclear transformation of the oleaginous marine Nannochloropsis species using PCR product.

    Science.gov (United States)

    Li, Fengjuan; Gao, Dawen; Hu, Hanhua

    2014-01-01

    Nannochloropsis are model species for investigating biofuel production by algae. To develop them into an integrated photons-to-fuel production platform, high efficiency transformation methods are necessary. Here, we obtained the β-tubulin promoter regions of all recognized species of genus Nannochloropsis, and successfully transformed all five marine species by electroporation. In addition, the PCR amplified double stranded DNA fragments (PCR fragments) based transformation system was established in these Nannochloropsis species, which showed much higher transformation efficiency (10.7-61.2 × 10(-6), 1.5-13-fold) than that of linearized plasmid based transformation. The cotransformation of N. salina using a circular plasmid containing a non-selectable GUS gene and a PCR fragment containing only a selection marker cassette was also achieved and found to be very efficient (over 50%). This simple and highly efficient transformation protocol reported in our study provided a useful tool for gene functional analysis and genetic engineering of the oleaginous Nannochloropsis species.

  14. Productive characteristics, nutrition and agronomic efficiency of polymer-coated MAP in lettuce crops

    Directory of Open Access Journals (Sweden)

    Wantuir Filipe Teixeira Chagas

    Full Text Available In contrast to enhanced-efficiency nitrogen fertilisers, principally urea, phosphate fertilisers have been little studied and the available information is limited. The aim of this work therefore was to evaluate the productive and nutritional characteristics and the agronomic efficiency of a polymer-coated MAP fertilizer on two subsequent lettuce crops. The experiment was carried out in a greenhouse, in pots with a capacity of 4 kg, filled with a dystrophic yellow Latosol of a clayey texture. The experimental design was completely randomised and the treatments arranged in a 2 x 5 factorial scheme: two sources of phosphorus (P (MAP and polymer-coated MAP, applied to the plots in five dosages (0, 100, 200, 400, 800 mg P2O5 kg-1 with three replications. The results showed that the polymer-coated MAP increased the efficiency of the phosphate fertilizer in both lettuce crops, improving utilisation of the residual phosphorus. The agronomic efficiency of fertilization decreases with the increases in applied phosphorus. The production and nutritional characteristics of the lettuce were influenced by the levels of P2O5 and the use of MAP with polymers. Higher values for dry and fresh weight and for the accumulation of P in the first crop occurred with the use of polymer-coated MAP at dosages of 506.9, 450.1 and 522.8 mg kg-1 P2O5.

  15. [Mechanisms for miniature dwarf characteristics of Mi-cro-Tom tomato and its application in plant functional genomics studies.].

    Science.gov (United States)

    Liu, Xiao-Hua; Zhang, Lan-Lan; Zhu, Chang-Qing; Chen, Kun-Song; Xu, Chang-Jie

    2008-10-01

    Micro-Tom is a miniature dwarf tomato, which can grow at a high density, has a short life cycle, and can be transformed efficiently. As a result, it became a new model plant for functional genomics study. The origin and biological characteristics of Micro-Tom were summarized. Recent advances in the mechanisms involved in the miniature dwarf trait, as well as the application of Micro-Tom in plant functional genomics study and the improved genetic transformation systems were reviewed.

  16. Expanded function allied dental personnel and dental practice productivity and efficiency.

    Science.gov (United States)

    Beazoglou, Tryfon J; Chen, Lei; Lazar, Vickie F; Brown, L Jackson; Ray, Subhash C; Heffley, Dennis R; Berg, Rob; Bailit, Howard L

    2012-08-01

    This study examined the impact of expanded function allied dental personnel on the productivity and efficiency of general dental practices. Detailed practice financial and clinical data were obtained from a convenience sample of 154 general dental practices in Colorado. In this state, expanded function dental assistants can provide a wide range of reversible dental services/procedures, and dental hygienists can give local anesthesia. The survey identified practices that currently use expanded function allied dental personnel and the specific services/procedures delegated. Practice productivity was measured using patient visits, gross billings, and net income. Practice efficiency was assessed using a multivariate linear program, Data Envelopment Analysis. Sixty-four percent of the practices were found to use expanded function allied dental personnel, and on average they delegated 31.4 percent of delegatable services/procedures. Practices that used expanded function allied dental personnel treated more patients and had higher gross billings and net incomes than those practices that did not; the more services they delegated, the higher was the practice's productivity and efficiency. The effective use of expanded function allied dental personnel has the potential to substantially expand the capacity of general dental practices to treat more patients and to generate higher incomes for dental practices.

  17. Industrial policy, production efficiency improvement and the Chinese county economic growth

    Directory of Open Access Journals (Sweden)

    Wang Zhenhua

    2016-12-01

    Full Text Available This study aims at analyzing the difference in the level of economic development between China’s counties from the two perspectives of industrial policy and production efficiency. Based on panel data of 1830 Chinese counties, this study employs the new classical economic growth theory framework to analyze the counties’ economic growth by the perpetual inventory method, Malmquist index, among others. The results show that the economy of the counties exhibits δ convergence since 2004, and the absolute differences in the different counties are expanding. Industrial policy ensures the additional deepening of the level of capital in the county. Additionally, a substantial difference was observed between the agricultural sector and the non-agricultural sector, whereby the total factor productivity and the technical efficiency are on the rise, resulting in the phenomenon of dual paths of technological progress. In summary, the capital deepening difference between the sectors, production efficiency, and dual paths of technological progress owing to the counties’ industrial policy are the basic reasons for the regional differences in the level of economic development in China.

  18. Improving the thermal efficiency of a jaggery production module using a fire-tube heat exchanger.

    Science.gov (United States)

    La Madrid, Raul; Orbegoso, Elder Mendoza; Saavedra, Rafael; Marcelo, Daniel

    2017-12-15

    Jaggery is a product obtained after heating and evaporation processes have been applied to sugar cane juice via the addition of thermal energy, followed by the crystallisation process through mechanical agitation. At present, jaggery production uses furnaces and pans that are designed empirically based on trial and error procedures, which results in low ranges of thermal efficiency operation. To rectify these deficiencies, this study proposes the use of fire-tube pans to increase heat transfer from the flue gases to the sugar cane juice. With the aim of increasing the thermal efficiency of a jaggery installation, a computational fluid dynamic (CFD)-based model was used as a numerical tool to design a fire-tube pan that would replace the existing finned flat pan. For this purpose, the original configuration of the jaggery furnace was simulated via a pre-validated CFD model in order to calculate its current thermal performance. Then, the newly-designed fire-tube pan was virtually replaced in the jaggery furnace with the aim of numerically estimating the thermal performance at the same operating conditions. A comparison of both simulations highlighted the growth of the heat transfer rate at around 105% in the heating/evaporation processes when the fire-tube pan replaced the original finned flat pan. This enhancement impacted the jaggery production installation, whereby the thermal efficiency of the installation increased from 31.4% to 42.8%. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Catalytic partial oxidation coupled with membrane purification to improve resource and energy efficiency in syngas production.

    Science.gov (United States)

    Iaquaniello, G; Salladini, A; Palo, E; Centi, G

    2015-02-01

    Catalytic partial oxidation coupled with membrane purification is a new process scheme to improve resource and energy efficiency in a well-established and large scale-process like syngas production. Experimentation in a semi industrial-scale unit (20 Nm(3)  h(-1) production) shows that a novel syngas production scheme based on a pre-reforming stage followed by a membrane for hydrogen separation, a catalytic partial oxidation step, and a further step of syngas purification by membrane allows the oxygen-to-carbon ratio to be decreased while maintaining levels of feed conversion. For a total feed conversion of 40 %, for example, the integrated novel architecture reduces oxygen consumption by over 50 %, with thus a corresponding improvement in resource efficiency and an improved energy efficiency and economics, these factors largely depending on the air separation stage used to produce pure oxygen. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Miniature Angle Measuring Interferometer (MIAMI)

    Science.gov (United States)

    Bauer, Robert J.

    The miniature Angle Measuring Interferometer (MIAMI) is a compact laser interferometer that was developed by Ball to satisfy the sensor needs of various pointing and tracking applications. These include: (1) attitude sensing for fast-steering mirrors and other optical elements, (2) structural monitoring and control for optical benches and other structures requiring micro-positioning, and (3) high-precision encoders for use in measuring the angular position of gimballed payloads and drives. MIAMI is constructed from off-the-shelf optical elements, using the inherent precision of the optical faces for alignment when feasible. In the present configuration, the laser light makes eight passes between the sensor head and the retroreflective target, amplifying the sensitivity of this device by a factor of eight. The interference of the two laser beams create fringe patterns, and the separation between fringes is equivalent to one wavelength of laser light (0.6328 micrometers). MIAMI uses interpolation to further subdivide each fringe spacing by a factor of 8 or 16, depending on configuration. MIAMI exhibits excellent performance characteristics, Its angular resolution is 175 nanoradians, and it achieves this with incremental data rates exceeding 5 MHz. MIAMI can accommodate rapid slew rates (greater than 50 deg/sec) and large angular travel (greater than +/- 20 deg). When used as a linear calibration sensor, MIAMI is capable of approxiamtely 10 nanometer linear resolution. The compact design (approximately 5 cubic in.) and light weight (approximately 8 oz) for the sensor head optics make it a very attractive candidate for space sensor applications.

  1. Miniature Bipolar Electrostatic Ion Thruster

    Science.gov (United States)

    Hartley, Frank T.

    2006-01-01

    The figure presents a concept of a bipolar miniature electrostatic ion thruster for maneuvering a small spacecraft. The ionization device in the proposed thruster would be a 0.1-micron-thick dielectric membrane with metal electrodes on both sides. Small conical holes would be micromachined through the membrane and electrodes. An electric potential of the order of a volt applied between the membrane electrodes would give rise to an electric field of the order of several mega-volts per meter in the submicron gap between the electrodes. An electric field of this magnitude would be sufficient to ionize all the molecules that enter the holes. In a thruster-based on this concept, one or more propellant gases would be introduced into such a membrane ionizer. Unlike in larger prior ion thrusters, all of the propellant molecules would be ionized. This thruster would be capable of bipolar operation. There would be two accelerator grids - one located forward and one located aft of the membrane ionizer. In one mode of operation, which one could denote the forward mode, positive ions leaving the ionizer on the backside would be accelerated to high momentum by an electric field between the ionizer and an accelerator grid. Electrons leaving the ionizer on the front side would be ejected into free space by a smaller accelerating field. The equality of the ion and electron currents would eliminate the need for an additional electron- or ion-emitting device to keep the spacecraft charge-neutral. In another mode of operation, which could denote the reverse mode, the polarities of the voltages applied to the accelerator grids and to the electrodes of the membrane ionizer would be the reverse of those of the forward mode. The reversal of electric fields would cause the ion and electrons to be ejected in the reverse of their forward mode directions, thereby giving rise to thrust in the direction opposite that of the forward mode.

  2. Strategies for efficient and economical 2,3-butanediol production: new trends in this field.

    Science.gov (United States)

    Białkowska, Aneta M

    2016-12-01

    2,3-Butanediol (2,3-BD) is a promising bulk chemical with a potentially wide range of applications e.g., in the manufacture of printing inks, perfumes, synthetic rubber, fumigants, antifreeze agents, fuel additives, foodstuffs and pharmaceuticals. Its high heating value and ability to increase the octane number of fuels make 2,3-BD a promising drop-in fuel. It can also be converted to methyl-ethyl ketone (MEK), which is considered an effective liquid fuel additive. After combination with MEK and hydrogenation reaction, 2,3-BD can be converted to octane, which is used to produce high-quality aviation fuel. Currently 2,3-BD is mainly produced on an industrial scale by chemical methods. However, microbiological production of 2,3-BD offers a less expensive and more environmentally friendly alternative to traditional synthesis. This alcohol is generated from hexoses and pentoses mainly by bacterial strains of the genera Klebsiella, Bacillus, Serratia, and Enterobacter, which can convert waste products (such as glycerol and agricultural residues) and excess biomass (such as wood hydrolysates) to 2,3-BD. Recently, a significant improvement in microbial production has been achieved by the screening of efficient natural microbial strains, the application of alternative cost-effective substrates, and the genetic improvement of microbial producers. Furthermore, Klebsiella strains, which are regarded the most efficient natural 2,3-BD producers, have been subjected to genetic modifications aiming at the removal of pathogenic factors and the development of avirulent strains that could be used for the safe production of the diol. This review summarizes existing knowledge and experience concerning various strategies for efficient and economical microbial production of 2,3-BD.

  3. Rational engineering of plasticity residues of sesquiterpene synthases from Artemisia annua: product specificity and catalytic efficiency.

    Science.gov (United States)

    Li, Jian-Xu; Fang, Xin; Zhao, Qin; Ruan, Ju-Xin; Yang, Chang-Qing; Wang, Ling-Jian; Miller, David J; Faraldos, Juan A; Allemann, Rudolf K; Chen, Xiao-Ya; Zhang, Peng

    2013-05-01

    Most TPSs (terpene synthases) contain plasticity residues that are responsible for diversified terpene products and functional evolution, which provide a potential for improving catalytic efficiency. Artemisinin, a sesquiterpene lactone from Artemisia annua L., is widely used for malaria treatment and progress has been made in engineering the production of artemisinin or its precursors. In the present paper, we report a new sesquiterpene synthase from A. annua, AaBOS (A. annua α-bisabolol synthase), which has high sequence identity with AaADS (A. annua amorpha-4,11-diene synthase), a key enzyme in artemisinin biosynthesis. Comparative analysis of the two enzymes by domain-swapping and structure-based mutagenesis led to the identification of several plasticity residues, whose alteration changed the product profile of AaBOS to include γ-humulene as the major product. To elucidate the underlying mechanisms, we solved the crystal structures of AaBOS and a γ-humulene-producing AaBOS mutant (termed AaBOS-M2). Among the plasticity residues, position 399, located in the substrate-binding pocket, is crucial for both enzymes. In AaBOS, substitution of threonine for leucine (AaBOSL339T) is required for γ-humulene production; whereas in AaADS, replacing the threonine residue with serine (AaADST399S) resulted in a substantial increase in the activity of amorpha-4,11-diene production, probably as a result of accelerated product release. The present study demonstrates that substitution of plasticity residues has potential for improving catalytic efficiency of the enzyme.

  4. Relative efficiency and productivity: a preliminary exploration of public hospitals in Beijing, China.

    Science.gov (United States)

    Li, Hao; Dong, Siping; Liu, Tingfang

    2014-04-06

    Third-grade hospitals in Beijing have been rapidly developing in capacity and scale for many years. These hospitals receive a large number of patients, and ensuring their efficient operation is crucial in meeting people's healthcare needs. In this context, a study of their relative efficiency and productivity would be helpful to identify the driving factors and further improve their performance. After a review of literature, the current numbers of open beds and employees were selected as input variables. The number of outpatient and emergency visits and the number of discharged patients were selected as output variables. A total of 12 third-grade Class A general public hospitals in Beijing were selected for a preliminary study. The panel data from 2006-2009 were collected by the National Institute of Hospital Administration, Ministry of Health of P.R. China. Descriptive analysis and data envelopment analysis were used to analyze the data using Stata 10.0 and DEAP(V2.1) software. In the 2006-2009 period, descriptive results show that sample hospitals continuously expanded their capacity and scale, with growth rate of total revenue being the highest among all variables. The DEA results show that the average annual growth rate of productivity was 26.7%, and the rates were 47.3%, 21.3% and 13.8% respectively for two consecutive years. The average annual growth rate of technological change was 28.3%, and the rates were 49.4%, 21.5% and 16.4% respectively for two consecutive years. The average annual growth rate of technical efficiency change was -1.3%, and the rates were -1.4%, -0.02% and -2.2% respectively for two consecutive years. The sample hospitals in Beijing experienced substantial productivity growth, but annual growth rates were declining. Substantial technological change was the main contributor to the growth. Although some hospitals exhibited improvements in technical efficiency, there was a slight decline in general. To improve overall efficiency and

  5. Triennial Lactation Symposium: Opportunities for improving milk production efficiency in dairy cattle.

    Science.gov (United States)

    Connor, E E; Hutchison, J L; Olson, K M; Norman, H D

    2012-05-01

    Increasing feed costs and the desire to improve environmental stewardship have stimulated renewed interest in improving feed efficiency of livestock, including that of US dairy herds. For instance, USDA cost projections for corn and soybean meal suggest a 20% increase over 2010 pricing for a 16% protein mixed dairy cow ration in 2011, which may lead to a reduction in cow numbers to maintain profitability of dairy production. Furthermore, an October 2010 study by The Innovation Center for US Dairy to assess the carbon footprint of fluid milk found that the efficiency of feed conversion is the single greatest factor contributing to variation in the carbon footprint because of its effects on methane release during enteric fermentation and from manure. Thus, we are conducting research in contemporary US Holsteins to identify cows most efficient at converting feed to milk in temperate climates using residual feed intake (RFI), a measure used successfully to identify the beef cattle most efficient at converting feed to gain. Residual feed intake is calculated as the difference between predicted and actual feed intake to support maintenance and production (e.g., growth in beef cattle, or milk in dairy cattle). Heritability estimates for RFI in dairy cattle reported in the literature range from 0.01 to 0.38. Selection for a decreased RFI phenotype can reduce feed intake, methane production, nutrient losses in manure, and visceral organ weights substantially in beef cattle. We have estimated RFI during early lactation (i.e., to 90 d in milk) in the Beltsville Agricultural Research Center Holstein herd and observed a mean difference of 3.7 kg/d (P 0.20) in mean BW, ADG, or energy-corrected milk exhibited between the 2 groups. These results indicate promise for using RFI in dairy cattle to improve feed conversion to milk. Previous and current research on the use of RFI in lactating dairy cattle are discussed, as well as opportunities to improve production efficiency of dairy

  6. Productive Efficiency of Potato and Melon Growing Farms in Uzbekistan: A Two Stage Double Bootstrap Data Envelopment Analysis

    Directory of Open Access Journals (Sweden)

    Aziz Karimov

    2013-09-01

    Full Text Available This article is one of the first to carry out a non-parametric efficiency analysis of crop production in Uzbekistan. The study applies the bootstrap Data Envelopment Analysis (DEA to compute bias corrected technical efficiency (TE scores using a sample of farms located in two regions of Uzbekistan. The study also investigates the determinants of TE in potato and melon production. Results indicate that there is room for efficient use of resources. Farmers are found to be more scale-efficient but not productively efficient. Findings from the second stage DEA model display that soil fertility index, farm size, water availability, crop diversification index, dependency ratio, potential to work in large land area, and longer distance to market contribute positively to production efficiency.

  7. The economic efficiency of forest energy wood chip production in regional use – A case study

    Directory of Open Access Journals (Sweden)

    Dalibor Šafařík

    2013-01-01

    Full Text Available This regional project case study deals with the limiting factors of economic efficiency in the production of forest energy wood chips. The evaluation of production efficiency made use of data obtained from the Lesy města Brna, a.s. (Forest of the City of Brno, Corp., which were subjected to two static methods of investment evaluation: an analysis of the tipping point and determination of the limit of variable costs and a dynamic modified tipping point analysis using cash flow (i.e. cash break even analysis. The results have confirmed an established hypothesis, namely that the decisive factor in the profitability of the production of forest energy wood chips hinges on the costs incurred in the gathering of raw material and the distribution of the produced chips. The results include a further limiting factor: transportation costs to the final consumption location. The output of the study is a recommendation that the concentration of residual forest materials not exceed a distance of 250 m from the place of production to the point of disintegration and that the transport distance of energy chips not exceed 50 km from the place of disintegration to the final consumption point. These limiting values help quantify the full internal costs per cost unit, full internal cost profitability, total revenue profitability and annual profitability expressed in terms of fixed assets depreciation without factoring in financial aid.

  8. A novel paradigm for the high-efficient production of phycocyanin from Galdieria sulphuraria.

    Science.gov (United States)

    Wan, Minxi; Wang, Zhenyang; Zhang, Zhen; Wang, Jun; Li, Shulan; Yu, Anquan; Li, Yuanguang

    2016-10-01

    A novel cultivation strategy called "Sequential Heterotrophy-Dilution-Photoinduction" was successfully applied in the cultivation of Galdieria sulphuraria for efficient production of phycocyanin (PC). Algae cells were firstly cultivated heterotrophically to achieve high cell density. The maximal dry cell weight of 17.8gL(-1) and maximal biomass productivity of 103.1mgL(-1)h(-1) were obtained. Then, a dilution step was applied to obtain a suitable cell concentration and finally these cells were transferred to high light condition for phycocyanin accumulation. During the photoinduction step, cells could accumulate phycocyanin up to 13.88% of dry cell weight in a cultivation period of 8days. By this technology, total PC productivity far surpassed those reported in all literatures of Galdieria sulphuraria, and was 147-fold and 12-fold of those in photoautotrophic and heterotrophic technologies, respectively. Therefore, this strategy provides a promising approach for high-efficient phycocyanin production from Galdieria sulphuraria to meet its mass cultivation and commercialization application. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Computational model for a high temperature electrolyzer coupled to a HTTR for efficient nuclear hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Daniel; Rojas, Leorlen; Rosales, Jesus; Castro, Landy; Gamez, Abel; Brayner, Carlos, E-mail: danielgonro@gmail.com [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil); Garcia, Lazaro; Garcia, Carlos; Torre, Raciel de la, E-mail: lgarcia@instec.cu [Instituto Superior de Tecnologias y Ciencias Aplicadas (InSTEC), La Habana (Cuba); Sanchez, Danny [Universidade Estadual de Santa Cruz (UESC), Ilheus, BA (Brazil)

    2015-07-01

    High temperature electrolysis process coupled to a very high temperature reactor (VHTR) is one of the most promising methods for hydrogen production using a nuclear reactor as the primary heat source. However there are not references in the scientific publications of a test facility that allow to evaluate the efficiency of the process and other physical parameters that has to be taken into consideration for its accurate application in the hydrogen economy as a massive production method. For this lack of experimental facilities, mathematical models are one of the most used tools to study this process and theirs flowsheets, in which the electrolyzer is the most important component because of its complexity and importance in the process. A computational fluid dynamic (CFD) model for the evaluation and optimization of the electrolyzer of a high temperature electrolysis hydrogen production process flowsheet was developed using ANSYS FLUENT®. Electrolyzer's operational and design parameters will be optimized in order to obtain the maximum hydrogen production and the higher efficiency in the module. This optimized model of the electrolyzer will be incorporated to a chemical process simulation (CPS) code to study the overall high temperature flowsheet coupled to a high temperature accelerator driven system (ADS) that offers advantages in the transmutation of the spent fuel. (author)

  10. Novel instrumentation for real-time monitoring using miniaturized flow systems with integrated biosensors

    NARCIS (Netherlands)

    Freaney, R.; McShane, A.; Keaveny, T.V.; McKenna, M.; Rabenstein, K.; Scheller, F.W.; Pfeiffer, D.; Urban, G.; Moser, I.; Jobst, G.; Manz, A.; Verpoorte, E.; Widmer, M.W.; Diamond, D.; Dempsey, E.; Saez De Viteri, F.J.; Smyth, M.

    1997-01-01

    A prototype miniaturized Total Chemical Analysis System (μTAS) has been developed and applied to on-line monitoring of glucose and lactate in the core blood of anaesthetized dogs. The system consists of a highly efficient microdialysis sampling interface sited in a small-scale extracorporeal shunt

  11. Improved Conversion Rates in Drug Screening Applications sing Miniaturized Electrochemical Cells with Frit Channels

    NARCIS (Netherlands)

    Odijk, Mathieu; Olthuis, Wouter; van den Berg, Albert; Qiao, L.; Girault, H.

    2012-01-01

    This paper reports a novel design of a miniaturized three-electrode electrochemical cell, the purpose of which is aimed at generating drug metabolites with a high conversion efficiency. The working electrode and the counter electrode are placed in two separate channels to isolate the reaction

  12. A novel miniature superconducting converter for 1 kA magnets

    NARCIS (Netherlands)

    Chevtchenko, O.A.; Krooshoop, Hendrikus J.G.; ten Kate, Herman H.J.; Fedorovsky, Michael A.

    1996-01-01

    A miniature full-wave converter to control the current of a superconducting magnet is developed and tested in our institutes. Typical design values of the device are: AC voltage of 35 V, current of 7 A, and frequency 50-60 Hz; DC voltage o f f 0.2 V, and current of * 1 kA. An efficiency is better

  13. The role of empowering organization capabilities on efficiency of new product development

    Directory of Open Access Journals (Sweden)

    Hoda Nikakhtar

    2014-03-01

    Full Text Available This paper presents an empirical investigation on the effects of empowering organizational capabilities on new product-development efficiency improvement and the proposed study is applied in one of Iranian food producers in city of Tehran, Iran. The study considers seven components including technological capabilities, marketing mix capabilities, capabilities for communication with customers, quality of new products, fast entry to market capabilities, customer satisfaction and economic success. The study designs a questionnaire in Likert scale and distributes it among 384 randomly selected people who regularly use different food products. Cronbach alphas for all components of the survey are within acceptable limits and it confirms the overall questionnaire in terms of various questions. The study has used t-student test as well as structural equation modeling to examine different hypotheses of the survey.

  14. Product and Process Improvements Enabled by New Energy-efficient Drying Technique

    Energy Technology Data Exchange (ETDEWEB)

    Bussmann, P.; Voogt, J.; Boon, F. [TNO quality of Life, Apeldoorn (Netherlands)

    2009-10-09

    The removal of water is one of the most intensive processing steps in the food processing industry. A group of companies and research institutions, led by Applied Research Organisation TNO in the Netherlands, has developed an energy-saving technology: the EET-adsorption unit. This TNO patented technology can be used as an add-on to existing dryers to improve their performance. The EET-adsorption unit fixes the moisture content of the drying air in an energy-efficient manner. Normally, the drying gases are discharged after taking up moisture from the product in the dryer. This inevitably entails the loss of valuable heat (water vapour) and valuable ingredients such as essential oils from the product to dry. The EET-adsorption unit enables the drying gases to be reused, creating a considerable energy saving and increased product quality. For oxygen-sensitive substances, the EETadsorption unit can be run using alternative drying gases in a closed system.

  15. Novel fungal consortium pretreatment of waste oat straw to enhance economic and efficient biohydrogen production

    Directory of Open Access Journals (Sweden)

    Lirong Zhou

    2016-12-01

    Full Text Available Bio-pretreatment using a fungal consortium to enhance the efficiency of lignocellulosic biohydrogen production was explored.  A fungal consortium comprised of T. viride and P. chrysosporium as microbial inoculum was compared with untreated and single-species-inoculated samples. Fungal bio-pretreatment was carried out at atmospheric conditions with limited external energy input.  The effectiveness of the pretreatment is evaluated according to its lignin removal and digestibility. Enhancement of biohydrogen production is observed through scanning electron microscopy (SEM analysis. Fungal consortium pretreatment effectively degraded oat straw lignin (by >47% in 7 days leading to decomposition of cell-wall structure as revealed in SEM images, increasing biohydrogen yield. The hydrogen produced from the fungal consortium pretreated straw increased by 165% 6 days later, and was more than produced from either a single fungi species of T. viride or P. chrysosponium pretreated straw (94% and 106%, respectively. No inhibitory effect on hydrogen production was observed.

  16. A SOFTWARE PRODUCT LINE FOR ENERGY-EFFICIENT CONTROL OF SUPPLEMENTARY LIGHTING IN GREENHOUSES

    DEFF Research Database (Denmark)

    Mærsk-Møller, Hans Martin; Jørgensen, Bo Nørregaard

    2011-01-01

    of 2009 – 2010 showed 25 percent savings with no negative effect on plant quality. To accelerate the impact of our approach, we chose to use Software Product Line Engineering, as it enables a greater variety of related software tools to be created faster. We have created a web-based analysis tool, Dyna...... preserving production quality. This paper presents a novel approach addressing this issue. We use weather forecasts and electricity prices to compute cost- and energy-efficient supplementary light plans that achieve the required plant growth defined by the grower. Experiments performed during the winter...... of these two tools is described together with the lessons learned from using Software Product Line Engineering in the domain of greenhouse software development....

  17. Tobacco, a highly efficient green bioreactor for production of therapeutic proteins.

    Science.gov (United States)

    Tremblay, Reynald; Wang, David; Jevnikar, Anthony M; Ma, Shengwu

    2010-01-01

    Molecular farming of pharmaceuticals in plants has the potential to provide almost unlimited amounts of recombinant proteins for use in disease diagnosis, prevention or treatment. Tobacco has been and will continue to be a major crop for molecular farming and offers several practical advantages over other crops. It produces significant leaf biomass, has high soluble protein content and is a non-food crop, minimizing the risk of food-chain contamination. This, combined with its flexibility and highly-efficient genetic transformation/regeneration, has made tobacco particularly well suited for plant-based production of biopharmaceutical products. The goal of this review is to provide an update on the use of tobacco for molecular farming of biopharmaceuticals as well the technologies developed to enhance protein production/purification/efficacy. We show that tobacco is a robust biological reactor with a multitude of applications and may hold the key to success in plant molecular farming. Copyright 2009 Elsevier Inc. All rights reserved.

  18. Advances in miniature spectrometer and sensor development

    Science.gov (United States)

    Malinen, Jouko; Rissanen, Anna; Saari, Heikki; Karioja, Pentti; Karppinen, Mikko; Aalto, Timo; Tukkiniemi, Kari

    2014-05-01

    Miniaturization and cost reduction of spectrometer and sensor technologies has great potential to open up new applications areas and business opportunities for analytical technology in hand held, mobile and on-line applications. Advances in microfabrication have resulted in high-performance MEMS and MOEMS devices for spectrometer applications. Many other enabling technologies are useful for miniature analytical solutions, such as silicon photonics, nanoimprint lithography (NIL), system-on-chip, system-on-package techniques for integration of electronics and photonics, 3D printing, powerful embedded computing platforms, networked solutions as well as advances in chemometrics modeling. This paper will summarize recent work on spectrometer and sensor miniaturization at VTT Technical Research Centre of Finland. Fabry-Perot interferometer (FPI) tunable filter technology has been developed in two technical versions: Piezoactuated FPIs have been applied in miniature hyperspectral imaging needs in light weight UAV and nanosatellite applications, chemical imaging as well as medical applications. Microfabricated MOEMS FPIs have been developed as cost-effective sensor platforms for visible, NIR and IR applications. Further examples of sensor miniaturization will be discussed, including system-on-package sensor head for mid-IR gas analyzer, roll-to-roll printed Surface Enhanced Raman Scattering (SERS) technology as well as UV imprinted waveguide sensor for formaldehyde detection.

  19. Miniaturized resonant sensors for harsh environments

    Science.gov (United States)

    Schmidtchen, Silja; Richter, Denny; Sauerwald, Jan; Fritze, Holger

    2013-05-01

    Miniaturized active structures for operation temperatures between 500 and 1000 °C are presented. They base on langasite single crystals (La3Ga5SiO14) which exhibit piezoelectrically excited bulk acoustic waves up to at least 1000 °C. Those devices enable new high-temperature sensing approaches. Resonant microbalances are of particular interest since they correlate very small gas composition-dependent mass changes of thin films already deposited onto the resonators with the resonance frequency shift of such devices. Thereby, high-temperature processes as occurring in combustion systems can be monitored in-situ. Miniaturization of those sensor devices improves the sensitivity due to higher operation frequencies. Arrays consisting preferably of miniaturized devices increase the selectivity. Miniaturization of high-temperature devices requires even more stable materials due to the increased effect of e. g. diffusion processes. Further, the resonator design, the arrangement of electrodes and sensor films, the vibration profiles etc. must be reviewed critically in order to take account for their miniaturization. Beside the characterization of the electromechanical properties such as temperature dependent resonance frequency and loss, the specific vibration profiles of devices like membranes of different shape, cantilevers and tuning forks are determined. For this purpose a novel measurement system based on a laser Doppler vibrometer is used to characterize different types of resonant sensor devices in-situ at high temperatures and in different atmospheres. Mapping of the sample surfaces provides the spatial distribution of the mechanical displacement and, thereby, the vibration modes.

  20. Substrate-limited co-culture for efficient production of propionic acid from flour hydrolysate.

    Science.gov (United States)

    Sabra, W; Dietz, D; Zeng, A P

    2013-07-01

    Propionic acid is presently mainly produced by chemical synthesis. For many applications, especially in feed and food industries, a fermentative production of propionic acid from cheap and renewable resources is of large interest. In this work, we investigated the use of a co-culture to convert household flour to propionic acid. Batch and fed-batch fermentations of hydrolyzed flour and a process of simultaneous saccharification and fermentation were examined and compared. Fed-batch culture with substrate limitation was found to be the most efficient process, reaching a propionic acid concentration of 30 g/L and a productivity of 0.33 g/L*h. This is the highest productivity so far achieved with free cells on media containing flour hydrolysate or glucose as carbon source. Batch culture and culture with controlled saccharification and fermentation delivered significantly lower propionic acid production (17-20 g/L) due to inhibition by the intermediate product lactate. It is concluded that co-culture fermentation of flour hydrolysate can be considered as an appealing bioprocess for the production of propionic acid.

  1. A basic design for a multicriteria approach to efficient bioenergy production at regional level

    Energy Technology Data Exchange (ETDEWEB)

    Hagen, Zoe [Technische Univ. Berlin (Germany). Environmental Assessment and Policy Research Group

    2012-12-01

    In Germany, government policies supporting the growth of renewable energies lead to a rapid increase in energy crop cultivation. This increase is linked to possible conflicts between different sustainability goals which so far have been rarely considered in the planning procedure. This article looks at different approaches of assessment and planning methods on a regionspecific level. It describes the methodology of the project Efficient Bio-Energy in the Perspective of Nature Conservation - Assessment and Recommendations to Protect Biodiversity and Climate which aims to establish the basis for an integrated sustainability assessment of energy crop cultivation for decentralized energy production in Germany and has been conducted by the author. The method takes into account the three main requirements of agricultural profitability, greenhouse gases (GHG) efficiency, and environmental sustainability of energy crop cultivation for decentralized energy production and has been applied for two sample regions. Using ArcGIS, the suitability of energy crops can be displayed, and regional aspects can be considered by overlaying and intersecting the individual output of all three requirements. This allows the definition of 'no-go' areas as well as the overall estimation of the maximum sustainable production capacity for each energy crop or energy path in a specific region. It enables an estimation of the profitability and GHG efficiency of energy crop cultivation paths at regional or communal level under consideration of different indicators for environmental sustainability. The article closes with a discussion of the methodological challenges of this integrative method. The conclusion gives an outlook in which planning and policy processes could be beneficial to apply such an integrative method in order to assess the suitability of certain landscape areas for energy production paths. (orig.)

  2. The Productivity and Technical Efficiency of Textile Industry Clusters in India

    Science.gov (United States)

    Bhaskaran, E.

    2013-09-01

    The Indian textile industry is one the largest and oldest sectors in the country and among the most important in the economy in terms of output, investment and employment (E). The sector employs nearly 35 million people and after agriculture, is the second-highest employer in the country. Its importance is underlined by the fact that it accounts for around 4 % of Gross Domestic Product, 14 % of industrial production, 9 % of excise collections, 18 % of E in the industrial sector, and 16 % of the country's total exports (Ex) earnings. For inclusive growth and sustainable development most of the Textile Manufacturers has adopted the Cluster Development Approach. The objective is to study the physical and financial performance, correlation, regression and Data Envelopment Analysis by measuring technical efficiency (Ø), peer weights (λi), input slacks (S-), output slacks (S+) and return to scale of four textile clusters (TCs) namely IchalKaranji Textile Cluster, Maharashtra; Ludhiana Textile Cluster, Punjab; Tirupur Textile Cluster, Tamilnadu and Panipat Textile Cluster, Haryana in India. The methodology adopted is using Data Envelopment Analysis of Output Oriented Banker Charnes Cooper Model by taking number of units (U) and number of E as inputs and sales (S) and Ex in crores as an outputs. The non-zero λi's represents the weights for efficient clusters. The S > 0 obtained for one TC reveals the excess U (S-) and E (S-) and shortage in sales (S+) and Ex (S+). To conclude, for inclusive growth and sustainable development, the inefficient TC should increase their S/turnover and Ex, as decrease in number of enterprises and E is practically not possible. Moreover for sustainable development, the TC should strengthen infrastructure interrelationships, technology interrelationships, procurement interrelationships, production interrelationships and marketing interrelationships to decrease cost, increase productivity and efficiency to compete in the world market.

  3. Efficient photothermal catalytic hydrogen production over nonplasmonic Pt metal supported on TiO2

    Science.gov (United States)

    Song, Rui; Luo, Bing; Jing, Dengwei

    2016-10-01

    Most of the traditional photocatalytic hydrogen productions were conducted under room temperature. In this work, we selected nonplasmonic Pt metal anchored on TiO2 nanoparticles with photothermal activity to explore more efficient hydrogen production technology over the whole solar spectrum. Photothermal experiments were carried out in a carefully designed top irradiated photocatalytic reactor that can withstand high temperature and relatively higher pressure. Four typical organic materials, i.e., methyl alcohol (MeOH), trielthanolamne (TEOA), formic acid (HCOOH) and glucose, were investigated. Formic acid, a typical hydrogen carrier, was found to show the best activity. In addition, the effects of different basic parameters such as sacrificial agent concentration and the temperature on the activity of hydrogen generation were systematically investigated for understanding the qualitative and quantitative effects of the photothermal catalytic reaction process. The hydrogen yields at 90 °C of the photothermal catalytic reaction with Pt/TiO2 are around 8.1 and 4.2 times higher than those of reactions carried out under photo or thermal conditions alone. We can see that the photothermal hydrogen yield is not the simple sum of the photo and thermal effects. This result indicated that the Pt/TiO2 nanoparticles can efficiently couple photo and thermal energy to more effectively drive hydrogen production. As a result, the excellent ability makes it superior to other conventional semiconductor photocatalysts and thermal catalysts. Future works could concentrate on exploring photothermal catalysis as well as the potential synergism between photo and thermal effects to find more efficient hydrogen production technology using the whole solar spectrum.

  4. A Laser Interferometric Miniature Sensor

    Energy Technology Data Exchange (ETDEWEB)

    Carr, Dustin W., PhD.; Baldwin, Patrick C.; Milburn, Howard; Robinson, David

    2011-09-12

    This is the second year of a Phase II Small Business Innovation Research (SBIR) contract geared towards the development of a new seismic sensor. Ground-based seismic monitoring systems have proven to be very capable in identifying nuclear tests, and can provide somewhat precise information on the location and yield of the explosive device. Making these measurements, however, currently requires very expensive and bulky seismometers that are difficult to deploy in places where they are most needed. A high performance, compact device can enable rapid deployment of large scale arrays, which can in turn be used to provide higher quality data during times of critical need. The use of a laser interferometer-based device has shown considerable promise, while also presenting significant challenges. The greatest strength of this optical readout technique is the ability to decouple the mechanical design from the transducer, thus enabling a miniaturized design that is not accessible with conventional sensing techniques. However, the nonlinearity in the optical response must be accounted for in the sensor output. Previously, we had proposed using a force-feedback approach to position the sensor at a point of maximum linearity. However, it can be shown that the combined nonlinearities of the optical response and the force-feedback curve necessarily results in a significant amount of unwanted noise at low frequencies. Having realized this, we have developed a new approach that eliminates force feedback, allowing the proof mass to move freely at all times. This takes advantage of some advanced optical spatial filtering that was developed at Symphony Acoustics for other types of sensors, and was recently adapted to this work. After processing the signals in real time, the digital output of the device is intrinsically linear, and the sensor can operate at any orientation with the same level of resolution, while instantly adapting to significant changes in orientation. Ultimately, we

  5. The impact of agricultural extension on farmers’ technical efficiencies in Ethiopia: A stochastic production frontier approach

    Directory of Open Access Journals (Sweden)

    Kidanemariam G. Gebrehiwot

    2017-06-01

    Full Text Available Background: To address the structural food deficit and top down extension system that persisted for decades, the government of Ethiopia has introduced a new extension system, called Participatory Demonstration and Training Extension Systems, which serves more than 80% of the total population. As the program was streamlined to fit the different agro-climatic condition of the country, the extension approach practiced in the Tigray region (research area was called Integrated Household Extension Program. Aim: This article reports on research aimed at measuring the technical efficiency levels of extension participants and non-participants; measuring the impact extension service on technical efficiency. Setting: The research was conducted in the northern part of the country, where agriculture is the main sources of livelihoods. Moisture is the most critical factor in the production system. The land holding size averages 0.5 ha per household compared to above three ha 30 years ago; indicating the high population pressure in the area. Methods: A sample of 362 agricultural extension service participants and 369 non-participant farm households from the northern part of Ethiopia, participated in the study. The stochastic production frontier technique was used to analyse the survey data and to compute farm-level technical efficiency. Results: The results showed an average level of technical efficiency of 48%. It is suggested that substantial gains in output and/or decrease in cost can be attained with the existing technology. All the variables included in the model to explain efficiency were found significant and with the expected sign, except education and number of dependants. Conclusion: The research tried to assess the impact of a new extension service (participatory in nature on farmers’ productivity in a semi-arid zone, as compared with the conventional extension service and found in the literature areas with relatively better climatic

  6. The production of consuming less: Energy efficiency, climate change, and light bulbs in North Carolina

    Science.gov (United States)

    Thoyre, Autumn

    In this research, I have analyzed the production of consuming less electricity through a case study of promotions of compact fluorescent light bulbs (CFLs). I focused on the CFL because it has been heavily promoted by environmentalists and electricity companies as a key tool for solving climate change, yet such promotions appear counter-intuitive. The magnitude of CFL promotions by environmentalists is surprising because CFLs can only impact less than 1% of U.S. greenhouse gas emissions. CFL promotions by electricity providers are surprising given such companies' normal incentives to sell more of their product. I used political ecological and symbolic interactionist theories, qualitative methods of data collection (including interviews, participant-observation, texts, and images), and a grounded theory analysis to understand this case. My findings suggest that, far from being a self-evident technical entity, energy efficiency is produced as an idea, a part of identities, a resource, and a source of value through social, political, and economic processes. These processes include identity formation and subjectification; gender-coded household labor; and corporate appropriation of household value resulting from environmental governance. I show how environmentalists use CFLs to make and claim neoliberal identities, proposing the concept of green neoliberal identity work as a mechanism through which neoliberal ideologies are translated into practices. I analyze how using this seemingly easy energy efficient technology constitutes labor that is gendered in ways that reflect and reproduce inequalities. I show how electricity companies have used environmental governance to valorize and appropriate home energy efficiency as an accumulation strategy. I conclude by discussing the symbolic power of CFLs, proposing a theory of green obsolescence, and framing the production of energy efficiency as a global production network. I found that promoting energy efficiency involves

  7. Efficient Sum of Outer Products Dictionary Learning (SOUP-DIL) and Its Application to Inverse Problems.

    Science.gov (United States)

    Ravishankar, Saiprasad; Nadakuditi, Raj Rao; Fessler, Jeffrey A

    2017-12-01

    The sparsity of signals in a transform domain or dictionary has been exploited in applications such as compression, denoising and inverse problems. More recently, data-driven adaptation of synthesis dictionaries has shown promise compared to analytical dictionary models. However, dictionary learning problems are typically non-convex and NP-hard, and the usual alternating minimization approaches for these problems are often computationally expensive, with the computations dominated by the NP-hard synthesis sparse coding step. This paper exploits the ideas that drive algorithms such as K-SVD, and investigates in detail efficient methods for aggregate sparsity penalized dictionary learning by first approximating the data with a sum of sparse rank-one matrices (outer products) and then using a block coordinate descent approach to estimate the unknowns. The resulting block coordinate descent algorithms involve efficient closed-form solutions. Furthermore, we consider the problem of dictionary-blind image reconstruction, and propose novel and efficient algorithms for adaptive image reconstruction using block coordinate descent and sum of outer products methodologies. We provide a convergence study of the algorithms for dictionary learning and dictionary-blind image reconstruction. Our numerical experiments show the promising performance and speedups provided by the proposed methods over previous schemes in sparse data representation and compressed sensing-based image reconstruction.

  8. The Effect of Implementing a Maintenance Information System on the Efficiency of Production Facilities

    Directory of Open Access Journals (Sweden)

    Slaichova Eva

    2013-09-01

    Full Text Available The paper deals with the topic of facility management focusing on maintenance area and its importance for increasing company competitiveness. The importance of functional company facility management has risen dramatically in recent years. The reason for this is the increased pressure on cost reduction and additional value to the core business of the enterprise. The paper introduces a current theoretical literature-based framework for this topic in order to examine and analyse the supporting activities and processes connected with production facilities and maintenance particularly. The main aim of the paper is to show the importance of a maintenance management information system and the effects of its implementation on the overall equipment efficiency of the facility in the enterprise based on primary data gathered from a selected company. The data was processed in a case study using information from the maintenance department of the selected enterprise in the plastic-processing industry in selected years (2006, 2008, 2009 and 2010. As it shows, this particular system was intended to provide relevant information to workers responsible for adjusting and repairing machines, as well as to the management of the enterprise in order to help them to make the right decision. The results of the data analysis proved the importance of computerized maintenance management information system (CMMIS implementation in improving Overall Equipment Efficiency (OEE metrics and the efficient control of its production system.

  9. Operational Efficiency and Productivity Improvement Initiatives in a Large Cardiac Catheterization Laboratory.

    Science.gov (United States)

    Reed, Grant W; Hantz, Scott; Cunningham, Rebecca; Krishnaswamy, Amar; Ellis, Stephen G; Khot, Umesh; Rak, Joe; Kapadia, Samir R

    2018-02-26

    This study sought to report outcomes from an efficiency improvement project in a large cardiac cath lab. Operational inefficiencies are common in the cath lab, yet solutions are challenging. A detailed report describing and providing solutions for these inefficiencies may be valuable in guiding improvements in productivity. In this observational study, the authors report metrics of efficiency before and after a cath lab quality improvement program in June 2014. Main outcomes included lab room start times, room turnaround times, laboratory use, and employee satisfaction. Time series analysis was used to assess trend over time. Chi-square testing and analysis of variance were used to assess change before and after the initiative. The principal changes included implementation of a pyramidal nursing schedule, increased use of an electronic scheduling system, and increased utilization of a preparation and recovery area. Comparing before with after the program, start times improved an average of 17 min, and on-time starts improved from 61.8% to 81.7% (p = 0.0024). Turnaround times improved from 20.5 min to 16.4 min (trend p productivity. This knowledge may be helpful in assisting other cath labs in similar efficiency improvement initiatives. Copyright © 2018 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  10. Production of drug nanosuspensions: effect of drug physical properties on nanosizing efficiency.

    Science.gov (United States)

    Liu, Tao; Müller, Rainer H; Möschwitzer, Jan P

    2017-10-17

    Drug nanosuspension is one of the established methods to improve the bioavailability of poorly soluble drugs. Drug physical properties aspect (morphology, solid state, starting size et al) is a critical parameter determining the production efficiency. Some drug modification approaches such as spray-drying were proved to improve the millability of drug powders. However, the mechanism behind those improved performances is unclear. This study is to systematically investigate the influence of those physical properties. Five different APIs (active pharmaceutical ingredients) with different millabilities, i.e. resveratrol, hesperetin, glibenclamide, rutin, and quercetin, were processed by standard high pressure homogenization (HPH), wet bead milling (WBM), and a combinative method of spray-drying and HPH. Smaller starting sizes of certain APIs could accelerate the particle size reduction velocity during both HPH and WBM processes. Spherical particles were observed for almost all spray-dried powders (except spray-dried hesperetin) after spray-drying. The crystallinity of some spray-dried samples such as rutin and glibenclamide became much lower than their corresponding unmodified powders. Almost all spray-dried drug powders after HPH processes could lead to smaller nanocrystal particle size than unmodified APIs. The modified microstructure instead of solid state after spray-drying explained the potential reason for improved nanosizing efficiency. In addition, the contribution of starting size on the production efficiency was also critical according to both HPH and WBM results.

  11. Spatial extrapolation of light use efficiency model parameters to predict gross primary production

    Directory of Open Access Journals (Sweden)

    Karsten Schulz

    2011-12-01

    Full Text Available To capture the spatial and temporal variability of the gross primary production as a key component of the global carbon cycle, the light use efficiency modeling approach in combination with remote sensing data has shown to be well suited. Typically, the model parameters, such as the maximum light use efficiency, are either set to a universal constant or to land class dependent values stored in look-up tables. In this study, we employ the machine learning technique support vector regression to explicitly relate the model parameters of a light use efficiency model calibrated at several FLUXNET sites to site-specific characteristics obtained by meteorological measurements, ecological estimations and remote sensing data. A feature selection algorithm extracts the relevant site characteristics in a cross-validation, and leads to an individual set of characteristic attributes for each parameter. With this set of attributes, the model parameters can be estimated at sites where a parameter calibration is not possible due to the absence of eddy covariance flux measurement data. This will finally allow a spatially continuous model application. The performance of the spatial extrapolation scheme is evaluated with a cross-validation approach, which shows the methodology to be well suited to recapture the variability of gross primary production across the study sites.

  12. Toward on-chip directed evolution of unicellular organisms for efficient hydrogen production

    Science.gov (United States)

    Liao, David; Howe, Caleb; Muldoon, Cecilia; Galajda, Peter; Keymer, Juan; Austin, Robert

    2008-03-01

    To provide an energy resource alternative to fossil fuels, photosynthetic organisms must increase their energy conversion efficiency. The green algae C. reinhardtii stores light energy in hydrogen gas at 0.1% efficiency, less than the 10% required to compete with established fuels. This work combines hydrogen sensing in liquid culture with micro habitat patch (MHP) chips for directing hydrogen-producing organisms to evolve improved energy conversion efficiency. A MHP chip contains 87 1 mm x 1 mm x 100 μm interconnected chambers. By measuring hydrogen output from different chambers, we will select less productive patches to annihilate. We microfabricated chips from poly(dimethylsiloxane). Color changes in fluorescence micrographs confirm that 254 nm radiation kills algae in MHPs, liberating nutrients and space for exploitation by adjacent populations. We demonstrated colorimetric detection of hydrogen gas production at a rate of 10-8 mol H2 mL-1 s-1 using tungsten film on sub-mL liquid cultures of C. reinhardtii during 2-hrs. of fermentation in darkness.

  13. Impact of technical and technological changes on energy efficiency of production company - case study

    Science.gov (United States)

    Szwedzka, K.; Gruszka, J.; Szafer, P.

    2016-08-01

    Improving energy efficiency is one of the strategic objectives of the European Union for rational energy economy. To make efforts to improve energy efficiency have been obliged both small and large end-users. This article aims to show the possibilities of improving energy efficiency by introducing technical and technological process changes of pine lumber drying. The object of the research is process of drying lumber implemented in a production company, which is a key supplier of large furniture manufacturer. Pine lumber drying chamber consume about 45% of total electricity in sawmill. According to various sources, drying of 1m3 of lumber uses about 3060kWh and is dependent of inter alia: the drying process itself, the factors affecting the processing time and the desired output moisture content of the timber. The article proposals for changes in the process of drying lumber pine have been positively validated in the company, and as a result their energy consumption per 1 m3 of product declined by 18%.

  14. Light use efficiency for vegetables production in protected and indoor environments

    Science.gov (United States)

    Cocetta, Giacomo; Casciani, Daria; Bulgari, Roberta; Musante, Fulvio; Kołton, Anna; Rossi, Maurizio; Ferrante, Antonio

    2017-01-01

    In recent years, there is a growing interest for vegetables production in indoor or disadvantaged climatic zones by using greenhouses. The main problem of crop growing indoor or in environment with limited light availability is the correct choice of light source and the quality of lighting spectrum. In greenhouse and indoor cultivations, plant density is higher than in the open field and plants have to compete for light and nutrients. Nowadays, advanced systems for indoor horticulture use light emitting diodes (LED) for improving crop growth, enhancing the plant productivity and favouring the best nutritional quality formation. In closed environments, as indoor growing modules, the lighting system represents the only source of light and its features are fundamental for obtaining the best lighting performances for plant and the most efficient solution. LED lighting engines are more efficient compared to the lighting sources used traditionally in horticulture and allow light spectrum and intensity modulations to enhance the light use efficiency for plants. The lighting distribution and the digital controls are fundamental for tailoring the spectral distribution on each plant in specific moments of its growth and play an important role for optimizing growth and produce high-quality vegetables. LED lights can increase plant growth and yield, but also nutraceutical quality, since some light intensities increase pigments biosynthesis and enhance the antioxidants content of leaves or fruits: in this regards the selection of LED primary light sources in relation to the peaks of the absorbance curve of the plants is important.

  15. Energy efficiency and energy homeostasis as genetic and epigenetic components of plant performance and crop productivity.

    Science.gov (United States)

    De Block, Marc; Van Lijsebettens, Mieke

    2011-06-01

    The importance of energy metabolism in plant performance and plant productivity is conceptually well recognized. In the eighties, several independent studies in Lolium perenne (ryegrass), Zea mays (maize), and Festuca arundinacea (tall fescue) correlated low respiration rates with high yields. Similar reports in the nineties largely confirmed this correlation in Solanum lycopersicum (tomato) and Cucumis sativus (cucumber). However, selection for reduced respiration does not always result in high-yielding cultivars. Indeed, the ratio between energy content and respiration, defined here as energy efficiency, rather than respiration on its own, has a major impact on the yield potential of a crop. Besides energy efficiency, energy homeostasis, representing the balance between energy production and consumption in a changing environment, also contributes to an enhanced plant performance and this happens mainly through an increased stress tolerance. Although a few single gene approaches look promising, probably whole interacting networks have to be modulated, as is done by classical breeding, to improve the energy status of plants. Recent developments show that both energy efficiency and energy homeostasis have an epigenetic component that can be directed and stabilized by artificial selection (i.e. selective breeding). This novel approach offers new opportunities to improve yield potential and stress tolerance in a wide variety of crops. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Techno-economical efficiency and productivity change of wastewater treatment plants: the role of internal and external factors.

    Science.gov (United States)

    Hernández-Sancho, F; Molinos-Senante, M; Sala-Garrido, R

    2011-12-01

    Efficiency and productivity are important measures for identifying best practice in businesses and optimising resource-use. This study analyses how these two measures change across the period 2003-2008 for 196 wastewater treatment plants (WWTPs) in Spain, by using the benchmarking methods of Data Envelopment Analysis and the Malmquist Productivity Index. To identify which variables contribute to the sustainability of the WWTPs, differences in efficiency scores and productivity indices for external factors are also investigated. Our results indicate that both efficiency and productivity decreased over the five years. We verify that the productivity drop is primarily explained by technical change. Furthermore, certain external variables affected WWTP efficiency, including plant size, treatment technology and energy consumption. However, plants with low energy consumption are the only ones which improve their productivity. Finally, the benchmarking analyses proved to be useful as management tools in the wastewater sector, by providing vital information for improving the sustainability of plants.

  17. Evaluation of Water Use Efficiency Derived from MODIS Products against Eddy Variance Measurements in China

    Directory of Open Access Journals (Sweden)

    Li Zhang

    2015-08-01

    Full Text Available Water use efficiency (WUE is a useful indicator to illustrate the interaction of carbon and water cycles in terrestrial ecosystems. MODIS gross primary production (GPP and evapotranspiration (ET products have been used to analyze the spatial and temporal patterns of WUE and their relationships with environmental factors at regional and global scales. Although MODIS GPP and ET products have been evaluated using eddy covariance flux measurements, the accuracy of WUE estimated from MODIS products has not been well quantified. In this paper, we evaluated WUE estimated from MODIS GPP and ET products against eddy covariance measurements of GPP and ET during 2003–2008 at eight sites of the Chinese flux observation and research network (ChinaFLUX and conducted sensitivity analysis to investigate the possible key contributors to the bias of MODIS products. Results show that MODIS products underestimate eight-day water use efficiency in four forest ecosystems and one cropland ecosystem with the bias from −0.36–−2.28 g·C·kg−1 H2O, while overestimating it in three grassland ecosystems with the bias from 0.26–1.11 g·C·kg−1 H2O. Mean annual WUE was underestimated by 14%–54% at four forest sites, 45% at one cropland site and 7% at an alpine grassland site, but overestimated by 66% and 9% at a temperate grassland site and an alpine meadow site, respectively. The underestimation of WUE by MODIS data results from underestimated GPP and overestimated ET at four forest sites, while MODIS WUE values are significantly overvalued mainly due to underestimated ET in the three grassland ecosystems. The maximum light use efficiency and fraction of photosynthetically-active radiation (FPAR were the two most sensitive factors to the estimation of WUE derived from the MODIS GPP and ET algorithms. The error in meteorological data partly caused the overestimation of ET and accordingly underestimation in WUE in subtropical and tropical forests. The bias of

  18. FORAGES AND PASTURES SYMPOSIUM: Improving efficiency of production in pasture- and range-based beef and dairy systems.

    Science.gov (United States)

    Mulliniks, J T; Rius, A G; Edwards, M A; Edwards, S R; Hobbs, J D; Nave, R L G

    2015-06-01

    Despite overall increased production in the last century, it is critical that grazing production systems focus on improving beef and dairy efficiency to meet current and future global food demands. For livestock producers, production efficiency is essential to maintain long-term profitability and sustainability. This continued viability of production systems using pasture- and range-based grazing systems requires more rapid adoption of innovative management practices and selection tools that increase profitability by optimizing grazing management and increasing reproductive performance. Understanding the genetic variation in cow herds will provide the ability to select cows that require less energy for maintenance, which can potentially reduce total energy utilization or energy required for production, consequently improving production efficiency and profitability. In the United States, pasture- and range-based grazing systems vary tremendously across various unique environments that differ in climate, topography, and forage production. This variation in environmental conditions contributes to the challenges of developing or targeting specific genetic components and grazing systems that lead to increased production efficiency. However, across these various environments and grazing management systems, grazable forage remains the least expensive nutrient source to maintain productivity of the cow herd. Beef and dairy cattle can capitalize on their ability to utilize these feed resources that are not usable for other production industries. Therefore, lower-cost alternatives to feeding harvested and stored feedstuffs have the opportunity to provide to livestock producers a sustainable and efficient forage production system. However, increasing production efficiency within a given production environment would vary according to genetic potential (i.e., growth and milk potential), how that genetic potential fits the respective production environment, and how the grazing

  19. Miniaturized Digital EVA Radio Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Bennett Aerospace and Team Partners propose to develop a small, lightweight, and very power-efficient mobile radio for use on the Lunar surface. Our Team will...

  20. Presynaptic miniature GABAergic currents in developing interneurons.

    Science.gov (United States)

    Trigo, Federico F; Bouhours, Brice; Rostaing, Philippe; Papageorgiou, George; Corrie, John E T; Triller, Antoine; Ogden, David; Marty, Alain

    2010-04-29

    Miniature synaptic currents have long been known to represent random transmitter release under resting conditions, but much remains to be learned about their nature and function in central synapses. In this work, we describe a new class of miniature currents ("preminis") that arise by the autocrine activation of axonal receptors following random vesicular release. Preminis are prominent in gabaergic synapses made by cerebellar interneurons during the development of the molecular layer. Unlike ordinary miniature postsynaptic currents in the same cells, premini frequencies are strongly enhanced by subthreshold depolarization, suggesting that the membrane depolarization they produce belongs to a feedback loop regulating neurotransmitter release. Thus, preminis could guide the formation of the interneuron network by enhancing neurotransmitter release at recently formed synaptic contacts. Copyright 2010 Elsevier Inc. All rights reserved.

  1. Antenna Miniaturization in Complex Electromagnetic Environments

    DEFF Research Database (Denmark)

    Zhang, Jiaying

    with stringent specifications makes the antenna size reduction a significant challenge. Antenna miniaturization is thus one of the key technologies in designing a successful wireless unit for the hearing-aid application. This dissertation is focused on three areas that are related to the integration of a wire......- less communication system into the heading-aids, and these are the antenna miniaturization, the measurement techniques for electrically small antennas and the influence of complex environments on the characteristics of electrically small antennas, respectively. Antenna Miniaturization......In this dissertation, we present several novel designs of electrically small loop antennas for the hearing-aid application. First antenna design is a two-dimensional (2-D) planar differential-fed electrically small loop. The working mechanism of this antenna is based on the capacitive loading and the induc- tive...

  2. Superamphiphobic miniature boat fabricated by laser micromachining

    Science.gov (United States)

    Yin, Kai; Dong, Xinran; Zhang, Fan; Wang, Cong; Duan, Ji'an

    2017-03-01

    We fabricated a superamphiphobic miniature boat with marked drag reduction and excellent loading capacity using femtosecond laser direct writing technology. The as-prepared superamphiphobic surface of the boat exhibited apparent contact angles larger than 150° toward both water and oil. Miniature boats with the superamphiphobic surface slid effortlessly on both water and oil-polluted water surfaces, with an increase in sliding distance by up to 52% and load increase of up to 27% compared with those of a boat with an untreated surface. A potential mechanism that explains the excellent performance of the superamphiphobic miniature boat was also discussed. This work provides a simple and economically viable strategy to obtain advanced surfaces for use in microfluidics and marine engineering.

  3. Compact Miniaturized Antenna for 210 MHz RFID

    Science.gov (United States)

    Lee, Richard Q.; Chun, Kue

    2008-01-01

    This paper describes the design and simulation of a miniaturized square-ring antenna. The miniaturized antenna, with overall dimensions of approximately one tenth of a wavelength (0.1 ), was designed to operate at around 210 MHz, and was intended for radio-frequency identification (RFID) application. One unique feature of the design is the use of a parasitic element to improve the performance and impedance matching of the antenna. The use of parasitic elements to enhance the gain and bandwidth of patch antennas has been demonstrated and reported in the literature, but such use has never been applied to miniaturized antennas. In this work, we will present simulation results and discuss design parameters and their impact on the antenna performance.

  4. The effect of water availability on stand-level productivity, transpiration, water use efficiency and radiation use efficiency of field-grown willow clones

    DEFF Research Database (Denmark)

    Linderson, Maj-Lena; Iritz, Z.; Lindroth, A.

    2007-01-01

    The effect of water availability on stand-level productivity, transpiration, water use efficiency (WUE) and radiation use efficiency (RUE) is evaluated for different willow clones at stand level. The measurements were made during the growing season 2000 in a 3-year-old plantation in Scania...... low compared to other results. Generally, all clones, except for Jorunn, seem to be better off concerning biomass production, WUE and RUE than the reference clone. Jorr, Jorunn and Loden also seem to be able to cope with the reduced water availability with increase in the water use efficiency. Tora...... performs significantly better than the other clones concerning both growth and efficiency in light and water use, but the effect of the dry treatment on stem growth shows sensitivity to water availability. The reduced stem growth could be due to a change in allocation patterns. (C) 2007 Elsevier Ltd. All...

  5. PROFIT EFFICIENCY IN BROILER PRODUCTION: EVIDENCE FROM GREATER ACCRA REGION OF GHANA

    Directory of Open Access Journals (Sweden)

    Michael Tuffour

    2014-01-01

    Full Text Available The study examines profit efficiency and its determinants in broiler production in the context of profit maximization as an incentive for optimum production. The study uses the stochastic frontier approach with the application of the Cobb – Douglas profit function. A cross sectional data was obtained from one hundred poultry producers in Greater Accra Region using a multistage sampling method. The results of the study indicated that price of labor significantly reduced profit but the price of day old chick increased profit. The result further revealed that broiler producers were able to realize 54% of their frontier profit on the average. Number of years of experience in broiler production was found to reduce inefficiency whilst farms owned by sole proprietors were less economically efficient. The study recommends that the inputs should be made available to farmers at competitive prices and the quantity of labor use should be declined because the current level is uncompetitive. Training should also be provided to less experienced farmers to enable them adopt the best poultry farming practices.

  6. Land-based production of animal protein: impacts, efficiency, and sustainability.

    Science.gov (United States)

    Wu, Guoyao; Bazer, Fuller W; Cross, H Russell

    2014-11-01

    Land-based production of high-quality protein by livestock and poultry plays an important role in improving human nutrition, growth, and health, as well as economical and social developments worldwide. With exponential growth of the global population and marked rises in meat consumption per capita, demands for animal-source protein are expected to increase by 72% between 2013 and 2050. This raises concerns about the sustainability and environmental impacts of animal agriculture. An attractive solution to meeting the increasing needs for animal products and mitigating undesired effects of agricultural practices is to enhance the efficiency of animal growth, reproduction, and lactation. Breeding techniques may help achieve this goal, but have only met with limited success. A promising, mechanism-based approach is to optimize the proportion and amounts of amino acids in diets for maximizing whole-body protein synthesis and feed efficiency. Improvements in farm animal productivity will not only decrease the contamination of soils, groundwater, and air by excessive manure, but will also help sustain animal agriculture to produce high-quality protein for the expanding population in the face of diminishing resources. © 2014 New York Academy of Sciences.

  7. N(pro) fusion technology: On-column complementation to improve efficiency in biopharmaceutical production.

    Science.gov (United States)

    Schindler, S; Missbichler, B; Walther, C; Sponring, M; Cserjan-Puschmann, M; Auer, B; Schneider, R; Dürauer, A

    2016-04-01

    N(pro) fusion technology, a highly efficient system for overexpression of proteins and peptides in Escherichia coli, was further developed by splitting the autoprotease N(pro) into two fragments to generate a functional complementation system. The size of the expression tag is thus reduced from 168 to 58 amino acids, so by 66%. Upon complementation of the fragments auto-proteolytic activity is restored. This process has been shown for three model proteins of different size, a short 16 aa-peptide, MCP-1, and lysozyme. Moreover, the complementation was still functional after immobilization of the N-terminal fragment to a solid support which enables recycling of the immobilized fragment. This strategy enhances overall productivity of N(pro) Fusion Technology and thus allows more efficient production of recombinant proteins with reduced costs and in higher yields. Overall, the N(pro) complementation system has, depending on the size of the target molecule, potential to increase the productivity up to 4 fold for batch refolding and even more for on-column refolding strategies by the proven possibility of regeneration of the immobilized fragment. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  8. Efficiency and cost advantages of an advanced-technology nuclear electrolytic hydrogen-energy production facility

    Science.gov (United States)

    Donakowski, T. D.; Escher, W. J. D.; Gregory, D. P.

    1977-01-01

    The concept of an advanced-technology (viz., 1985 technology) nuclear-electrolytic water electrolysis facility was assessed for hydrogen production cost and efficiency expectations. The facility integrates (1) a high-temperature gas-cooled nuclear reactor (HTGR) operating a binary work cycle, (2) direct-current (d-c) electricity generation via acyclic generators, and (3) high-current-density, high-pressure electrolyzers using a solid polymer electrolyte (SPE). All subsystems are close-coupled and optimally interfaced for hydrogen production alone (i.e., without separate production of electrical power). Pipeline-pressure hydrogen and oxygen are produced at 6900 kPa (1000 psi). We found that this advanced facility would produce hydrogen at costs that were approximately half those associated with contemporary-technology nuclear electrolysis: $5.36 versus $10.86/million Btu, respectively. The nuclear-heat-to-hydrogen-energy conversion efficiency for the advanced system was estimated as 43%, versus 25% for the contemporary system.

  9. Cost-efficient light control for production of two campanula species

    DEFF Research Database (Denmark)

    Kjær, Katrine Heinsvig; Ottosen, Carl-Otto; Jørgensen, Bo Nørregaard

    2011-01-01

    A cost-efficient light control system based on weather forecasts, electricity prices and daily photosynthesis integral (DPI) was evaluated for application in the commercial production of the long-day (LD) plant Campanula portenschlagiana ‘Blue Get Mee’ and C. cochlearifolia ‘Blue Wonder...... be maintained in a cost-efficient light control system where the use of supplemental light is based on weather forecasts and electricity prices....... irradiance and the market price on electricity. The set points of DPI in the three treatments were 300, 450 and 600 mmol CO2 m−2 leaf d−1 and the treatments were compared with a traditional LD 19-h treatment. The DPI-based light control strategy resulted in very irregular light patterns including daily...

  10. Pretreatment of woody biomass for biofuel production: energy efficiency, technologies, and recalcitrance.

    Science.gov (United States)

    Zhu, J Y; Pan, Xuejun; Zalesny, Ronald S

    2010-07-01

    This mini review discusses several key technical issues associated with cellulosic ethanol production from woody biomass: energy consumption for woody biomass pretreatment, pretreatment energy efficiency, woody biomass pretreatment technologies, and quantification of woody biomass recalcitrance. Both total sugar yield and pretreatment energy efficiency, defined as the total sugar recovery divided by total energy consumption for pretreatment, should be used to evaluate the performance of a pretreatment process. A post-chemical pretreatment wood size-reduction approach was proposed to significantly reduce energy consumption. The review also emphasizes using a low liquid-to-wood ratio (L/W) to reduce thermal energy consumption for any thermochemical/physical pretreatment in addition to reducing pretreatment temperature.

  11. Impact of Irrigation Method on Water Use Efficiency and Productivity of Fodder Crops in Nepal

    Directory of Open Access Journals (Sweden)

    Ajay K Jha

    2016-01-01

    Full Text Available Improved irrigation use efficiency is an important tool for intensifying and diversifying agriculture in Nepal, resulting in higher economic yield from irrigated farmlands with a minimum input of water. Research was conducted to evaluate the effect of irrigation method (furrow vs. drip on the productivity of nutritious fodder species during off-monsoon dry periods in different elevation zones of central Nepal. A split-block factorial design was used. The factors considered were treatment location, fodder crop, and irrigation method. Commonly used local agronomical practices were followed in all respects except irrigation method. Results revealed that location effect was significant (p < 0.01 with highest fodder productivity seen for the middle elevation site, Syangja. Species effects were also significant, with teosinte (Euchlaena mexicana having higher yield than cowpea (Vigna unguiculata. Irrigation method impacted green biomass yield (higher with furrow irrigation but both methods yielded similar dry biomass, while water use was 73% less under drip irrigation. Our findings indicated that the controlled application of water through drip irrigation is able to produce acceptable yields of nutritionally dense fodder species during dry seasons, leading to more effective utilization and resource conservation of available land, fertilizer and water. Higher productivity of these nutritional fodders resulted in higher milk productivity for livestock smallholders. The ability to grow fodder crops year-round in lowland and hill regions of Nepal with limited water storages using low-cost, water-efficient drip irrigation may greatly increase livestock productivity and, hence, the economic security of smallholder farmers.

  12. High-Efficiency Food Production in a Renewable Energy Based Micro-Grid Power System

    Science.gov (United States)

    Bubenheim, David; Meiners, Dennis

    2016-01-01

    Controlled Environment Agriculture (CEA) systems can be used to produce high-quality, desirable food year round, and the fresh produce can positively contribute to the health and well being of residents in communities with difficult supply logistics. While CEA has many positive outcomes for a remote community, the associated high electric demands have prohibited widespread implementation in what is typically already a fully subscribed power generation and distribution system. Recent advances in CEA technologies as well as renewable power generation, storage, and micro-grid management are increasing system efficiency and expanding the possibilities for enhancing community supporting infrastructure without increasing demands for outside supplied fuels. We will present examples of how new lighting, nutrient delivery, and energy management and control systems can enable significant increases in food production efficiency while maintaining high yields in CEA. Examples from Alaskan communities where initial incorporation of renewable power generation, energy storage and grid management techniques have already reduced diesel fuel consumption for electric generation by more than 40% and expanded grid capacity will be presented. We will discuss how renewable power generation, efficient grid management to extract maximum community service per kW, and novel energy storage approaches can expand the food production, water supply, waste treatment, sanitation and other community support services without traditional increases of consumable fuels supplied from outside the community. These capabilities offer communities with a range of choices to enhance their communities. The examples represent a synergy of technology advancement efforts to develop sustainable community support systems for future space-based human habitats and practical implementation of infrastructure components to increase efficiency and enhance health and well being in remote communities today and tomorrow.

  13. ECO-EFFICIENCY ANALYSIS OF LOW-CARBON CEMENT PRODUCTION BY REPLACING CLINKER

    Directory of Open Access Journals (Sweden)

    Yanay Ruíz Rosa

    2017-04-01

    Full Text Available This work carries out the environmental evaluation of the cement production in Siguaney Factory as well as the calculation of the Eco-efficiency indicators according to the ISO 14045 norms; the Recipe methodology was used including 18 impact categories and the SimaPro 8.1 software was also used. In order to evaluate the eco-efficiency indicators according to the ISO 14045 norm, the results of the impact categories are related to the monetary value indicators, allowing the evaluation of the current situation as well as the consequences of the suggested modifications. As a result, the environmental profiles of P-35 cement (base case were obtained as well as those of the low carbon ones (LC3-35 y LC3-50 resulting from the clinker substitution by kaolinitic clay after some studies carried out by CIDEM researchers; and the eco-efficiency profiles. The comparison made between P-35 cement and the low-carbon cements showed positive results in eight weather impact categories, however, toxicity-related ones rise due to the increase in electricity consumption connected to the grinding of materials to obtain burnt clay bringing about a greater amount of emissions of volatile organic compounds to the air. An improvement in the eco-efficiency of 6 out of 8 calculated indicators is observed due to a simultaneous decrease in the production costs and the environmental impacts. LC3-50 cement shows the best results. The methodology used permits to evaluate alternatives related to the material substitution in the construction sector.

  14. High-Efficiency Food Production in a Renewable Energy Based Micro-Grid

    Science.gov (United States)

    Bubenheim, David L.

    2017-01-01

    Controlled Environment Agriculture (CEA) systems can be used to produce high-quality, desirable food year round, and the fresh produce can positively contribute to the health and well being of residents in communities with difficult supply logistics. While CEA has many positive outcomes for a remote community, the associated high electric demands have prohibited widespread implementation in what is typically already a fully subscribed power generation and distribution system. Recent advances in CEA technologies as well as renewable power generation, storage, and micro-grid management are increasing system efficiency and expanding the possibilities for enhancing community supporting infrastructure without increasing demands for outside supplied fuels. We will present examples of how new lighting, nutrient delivery, and energy management and control systems can enable significant increases in food production efficiency while maintaining high yields in CEA.Examples from Alaskan communities where initial incorporation of renewable power generation, energy storage and grid management techniques have already reduced diesel fuel consumption for electric generation by more than 40 and expanded grid capacity will be presented. We will discuss how renewable power generation, efficient grid management to extract maximum community service per kW, and novel energy storage approaches can expand the food production, water supply, waste treatment, sanitation and other community support services without traditional increases of consumable fuels supplied from outside the community. These capabilities offer communities with a range of choices to enhance their communities. The examples represent a synergy of technology advancement efforts to develop sustainable community support systems for future space-based human habitats and practical implementation of infrastructure components to increase efficiency and enhance health and well-being in remote communities today and tomorrow.

  15. EFFECTS OF PLANTING DENSITYAND ORGANIC FERTILIZATION DOSES ON PRODUCTIVE EFFICIENCY OF CACTUS PEAR

    Directory of Open Access Journals (Sweden)

    NALÍGIA GOMES DE MIRANDA E SILVA

    2016-01-01

    Full Text Available Cactus is crucial for the livestock of semi - arid regions in Brazil. This plant has shown the high productivity of forage, which is influenced by several management factors. This study aimed to evaluate the effect of organic fertilization doses (20, 40 and 80 t/ ha of bovine manure/ha/two years and planting densities (20, 40, 80 and 160 thousand plants/ha on the productivity of cactus pear Clone IPA - 20 ( Opuntia ficus - indica Mill. At the Experimental Station of Caruaru at the Agronomic Institute of Pernambuco, IPA has conducted the experiment. The experimental design was randomized blocks, with split plot arrangements. Higher shoot productivity was observed with increased population density and the application of manure at 80 t ha - 1two years - 1 with values of 61, 90, 117 and 139 t DM ha - 1 two years - 1 at densities of 20, 40, 80 and 160,000 plants ha - 1. The planting density influenced the productivity of cladode - plant and root dry weight, showing exponential responses, with higher cladode - plant and roots weight by area observed with increased plant density. The efficiency of organic fertilization decreased with the increase in manure doses. For increase cactus productivity, 40 t of bovine manure ha - 1 two years - 1 for plantations with 160,000 plants/ha is recommended.

  16. Increased ATP generation in the host cell is required for efficient vaccinia virus production

    Directory of Open Access Journals (Sweden)

    Hsu Che-Fang

    2009-09-01

    Full Text Available Abstract To search for cellular genes up-regulated by vaccinia virus (VV infection, differential display-reverse transcription-polymerase chain reaction (ddRT-PCR assays were used to examine the expression of mRNAs from mock-infected and VV-infected HeLa cells. Two mitochondrial genes for proteins that are part of the electron transport chain that generates ATP, ND4 and CO II, were up-regulated after VV infection. Up-regulation of ND4 level by VV infection was confirmed by Western blotting analysis. Up-regulation of ND4 was reduced by the MAPK inhibitor, apigenin, which has been demonstrated elsewhere to inhibit VV replication. The induction of ND4 expression occurred after viral DNA replication since ara C, an inhibitor of poxviral DNA replication, could block this induction. ATP production was increased in the host cells after VV infection. Moreover, 4.5 μM oligomycin, an inhibitor of ATP production, reduced the ATP level 13 hr after virus infection to that of mock-infected cells and inhibited viral protein expression and virus production, suggesting that increased ATP production is required for efficient VV production. Our results further suggest that induction of ND4 expression is through a Bcl-2 independent pathway.

  17. Efficiency and productivity analysis of the interstate bus transportation industry in Brazil

    Directory of Open Access Journals (Sweden)

    Antonio G.N. Novaes

    2010-08-01

    Full Text Available Productivity analysis is an important policy making and managerial control tool for assessing the degree to which inputs are utilized in the process of obtaining desired outputs. Data Envelopment Analysis (DEA is a non-parametric method based on piecewise linear frontiers estimated with the aid of mathematical programming techniques and used, in this paper, to investigate technical, scale and managerial efficiencies associated with interstate bus companies in Brazil (ISBT. Data has been obtained from the web-site of the Brazilian National Agency of Land Transportation (ANTT. Since production factors in the application are constrained by technical and operational reasons, weight restrictions were introduced into the DEA models. The analysis has shown three groups of non-efficient bus firms, with clear differences in productivity. The relative managerial efficiencies of the firms in the non-efficient groups were also computed and analyzed. Finally, an example of benchmarking a non-efficient firm with DEA is presented.A análise de produtividade é ferramenta importante para a tomada de decisão e para a gestão de organizações, possibilitando avaliar os efeitos dos inputs na obtenção de níveis desejados de outputs. A Análise Envoltória de Dados (DEA é um método não paramétrico baseado em fronteiras lineares por partes ajustadas através de programação matemática e utilizada para analisar as eficiências técnica, de escala e de gestão de empresas de ônibus que operam nas ligações interestaduais no Brasil (ISBT. Os dados foram obtidos no web-site da Agência Nacional de Transportes Terrestres (ANTT. Como os fatores de produção são restritos por razões técnicas e operacionais, restrições de pesos foram introduzidas nos modelos. A análise mostrou três grupos de empresas não eficientes, com claras diferenças de produtividade. Também são calculadas as eficiências de gestão relativas a esses três grupos. Finalmente

  18. Experimental demonstration of efficient quantum state tomography of matrix product states.

    Science.gov (United States)

    Zhao, Yuan-Yuan; Hou, Zhibo; Xiang, Guo-Yong; Han, Yong-Jian; Li, Chuan-Feng; Guo, Guang-Can

    2017-04-17

    Quantum state tomography is a key technology for fully determining a quantum state. Unfortunately, standard quantum state tomography is intractable for general many-body quantum states, because the number of measurements and the post-processing time increase exponentially with the size of the system. However, for the matrix product states (MPSs), there exists an efficient method using linearly scaled local measurements and polynomially scaled post-processing times. In this study, we demonstrate the validity of the method in practice by reconstructing a four-photon MPS from its local two- or three-photon reduced-density matrices with the presence of statistical errors and systematical errors in experiment.

  19. Magnetic nanowires and hyperthermia: How geometry and material affect heat production efficiency

    KAUST Repository

    Contreras, Maria F.

    2015-05-01

    Magnetic hyperthermia, which refers to the production of heat by magnetic nanostructures under an alternating magnetic field (AMF), has been previously investigated with superparamagnetic nanobeads as a cancer therapy method. Magnetic nanowires (NWs) used in hyperthermia can be very promising, as it has been shown that they have a larger magnetic moment per unit of volume compared to the nanobeads. Moreover, Fe NWs proved to have a higher heating efficiency compared to Fe nanobeads, when exposed to an AMF at the same concentration [1].

  20. Draft Regulatory Analysis. Technical support document No. 1: energy efficiency standards for consumer products

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    A Draft Regulatory Analysis is presented that describes the analyses performed by DOE to arrive at proposed energy efficiency standards for refrigerators and refrigerator-freezers, freezers, clothes dryers, water heaters, room air conditioners, kitchen ranges and ovens, central air conditioners (cooling only), and furnaces. Standards for dishwashers, television sets, clothes washers, and humidifiers and dehumidifiders are required to be published in the Federal Register no later than December 1981. Standards for central air conditioners (heat pumps) and home heating equipment are to be published in the Federal Register no later than January 1982. Accordingly, these products are not discussed in this Draft Regulatory Analysis.