WorldWideScience

Sample records for efficient drawbar work

  1. DRAWBAR TESTS OF A SELFPROPELLED CHIPPER MACHINE

    Directory of Open Access Journals (Sweden)

    Hermanovich, A. O.

    2013-06-01

    Full Text Available One of the ways to increase the efficiency of forest industry is the processing of waste wood into chips by chippers. In many countries of the world energetics on the plant and woody biomass is an effective self-sustaining industry, which is competitive with fossil fuel.

  2. 49 CFR 231.31 - Drawbars for freight cars; standard height.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Drawbars for freight cars; standard height. 231.31... cars; standard height. (a) Except on cars specified in paragraph (b) of this section— (1) On standard gage (561/2-inch gage) railroads, the maximum height of drawbars for freight cars (measured...

  3. Working Girls and the Temporality of Efficiency

    Science.gov (United States)

    Hahner, Leslie A.

    2009-01-01

    The public circulation of temporal discourse fashions the way in which subjects experience and value their time. At the turn of the twentieth century, experts in systematic management mandated that wage-earning women must be prodded into efficient labor in order to increase the overall yield of industry. Against this regime of time, the narrator…

  4. Developing concepts for improved efficiency of robot work preparation

    NARCIS (Netherlands)

    Essers, M.S.; Vaneker, Thomas H.J.

    2013-01-01

    SInBot[1] is a large research project that focuses on maximizing the efficient use of mobile industrial robots during medium sized production runs. The system that will be described in this paper will focusses on the development and validation of concepts for efficient work preparation for cells of

  5. Personality Traits as Predictors of Work Efficiency Among Nigerian ...

    African Journals Online (AJOL)

    Personality Traits as Predictors of Work Efficiency Among Nigerian Oil ... of 0.85 and reliability co-efficient of 0.85 and Job Performance Appraisal (JPA) from Oliver, ... recommendations were made on assigning individual workers to critical or ...

  6. Efficiency of working memory: Theoretical concept and practical application

    OpenAIRE

    Lalović Dejan

    2008-01-01

    Efficiency of working memory is the concept which connects psychology of memory with different fields of cognitive, differential and applied psychology. In this paper, the history of interest for the assessment of the capacity of short-term memory is presented in brief, as well as the different methods used nowadays to assess the individual differences in the efficiency of working memory. What follows is the consideration of studies that indicate the existence of significant links between the...

  7. Working Capital Efficiency and Firm Profitability – Nigeria and Kenya

    OpenAIRE

    Lucian J. Pitt

    2014-01-01

    The primary purpose of this study is to understand the differences in the relationship between working capital management efficiency, working capital investment decisions and working capital finance decisions and the profitability of firms within the context of two African developing economies, Kenya and Nigeria. The study finds that there is a significant difference in the relationship between the firm’s profitability and the working capital variables which suggests different challenges for ...

  8. Does Work Time Flexibility Work? An Empirical Assessment of the Efficiency Effects for German Firms

    OpenAIRE

    Wolf, Elke; Beblo, Miriam

    2004-01-01

    In this paper we assess the impact of flexible work time schedules on firm efficiency using representative establishment data for Germany. Following the approach by Battese and Coelli (1995), we estimate a stochastic production frontier and the determinants of technical efficiency simultaneously. The innovation of our study is that we draw on technical efficiency instead of productivity to appraise the success of flexible working hours. The results indicate that while the use of work time sch...

  9. Efficient Work Team Scheduling: Using Psychological Models of Knowledge Retention to Improve Code Writing Efficiency

    Directory of Open Access Journals (Sweden)

    Michael J. Pelosi

    2014-12-01

    Full Text Available Development teams and programmers must retain critical information about their work during work intervals and gaps in order to improve future performance when work resumes. Despite time lapses, project managers want to maximize coding efficiency and effectiveness. By developing a mathematically justified, practically useful, and computationally tractable quantitative and cognitive model of learning and memory retention, this study establishes calculations designed to maximize scheduling payoff and optimize developer efficiency and effectiveness.

  10. Analysis of remote working practice AND CALCULATION OF ECONOMIC EFFICIENCY

    Directory of Open Access Journals (Sweden)

    K. S. Ermakov

    2015-01-01

    Full Text Available The article is devoted to description of working from home practice at Allianz Insurance UK и Ernst & Young, UK & Ireland. It fulfilled the analysis of the best practices in the use of new forms of social and labor relations - remote work. The characteristics of using types of distance work, the policy of implementation and realization of such work in the company, the criteria for the transfer of employees to work remotely, the possibility of a flexible approach to workflow are given. The calculation of the economic efficiency of technology telecommuting at an aviation company of the Russian Federation is done. The method of calculating the cost-effectiveness based on several factors, such as costs for the organization and content of the workplace, change in labor productivity and others, was proposed by the authors. The calculation of economic efficiency by using the number of working hours, the impact on capital inputs and the impact on quit rates is considered.

  11. Developing concepts for improved efficiency of robot work preparation

    OpenAIRE

    Essers, M.S.; Vaneker, Thomas H.J.

    2013-01-01

    SInBot[1] is a large research project that focuses on maximizing the efficient use of mobile industrial robots during medium sized production runs. The system that will be described in this paper will focusses on the development and validation of concepts for efficient work preparation for cells of intelligent mobile robots that execute medium sized production runs. For a wide range of products, the machining tasks will be defined on an appropriate level, enabling control over the robots beha...

  12. Efficiency of working memory: Theoretical concept and practical application

    Directory of Open Access Journals (Sweden)

    Lalović Dejan

    2008-01-01

    Full Text Available Efficiency of working memory is the concept which connects psychology of memory with different fields of cognitive, differential and applied psychology. In this paper, the history of interest for the assessment of the capacity of short-term memory is presented in brief, as well as the different methods used nowadays to assess the individual differences in the efficiency of working memory. What follows is the consideration of studies that indicate the existence of significant links between the efficiency of working memory and general intelligence, the ability of reasoning, personality variables, as well as some socio-psychological phenomena. Special emphasis is placed on the links between the efficiency of working memory and certain aspects of pedagogical practice: acquiring the skill of reading, learning arithmetic and shedding light on the cause of general failure in learning at school. What is also provided are the suggestions that, in the light of knowledge about the development and limitations of working memory at school age, can be useful for teaching practice.

  13. Working memory capacity and redundant information processing efficiency.

    Science.gov (United States)

    Endres, Michael J; Houpt, Joseph W; Donkin, Chris; Finn, Peter R

    2015-01-01

    Working memory capacity (WMC) is typically measured by the amount of task-relevant information an individual can keep in mind while resisting distraction or interference from task-irrelevant information. The current research investigated the extent to which differences in WMC were associated with performance on a novel redundant memory probes (RMP) task that systematically varied the amount of to-be-remembered (targets) and to-be-ignored (distractor) information. The RMP task was designed to both facilitate and inhibit working memory search processes, as evidenced by differences in accuracy, response time, and Linear Ballistic Accumulator (LBA) model estimates of information processing efficiency. Participants (N = 170) completed standard intelligence tests and dual-span WMC tasks, along with the RMP task. As expected, accuracy, response-time, and LBA model results indicated memory search and retrieval processes were facilitated under redundant-target conditions, but also inhibited under mixed target/distractor and redundant-distractor conditions. Repeated measures analyses also indicated that, while individuals classified as high (n = 85) and low (n = 85) WMC did not differ in the magnitude of redundancy effects, groups did differ in the efficiency of memory search and retrieval processes overall. Results suggest that redundant information reliably facilitates and inhibits the efficiency or speed of working memory search, and these effects are independent of more general limits and individual differences in the capacity or space of working memory.

  14. Improvement of Engineering Work Efficiency through System Integration

    International Nuclear Information System (INIS)

    Lee, Sangdae; Jo, Sunghan; Hyun, Jinwoo

    2016-01-01

    This paper presents the concept of developing an integrated engineering system for ER to improve efficiency and utilization of engineering system. Each process including computer system and database was introduced separately by each department at that different time. Each engineering process has a close relation with other engineering processes. The introduction of processes in a different time has caused the several problems such as lack of interrelationship between engineering processes, lack of integration fleet-wide statistical data, lack of the function of data comparison among plants and increase of access time by different access location on internet. These problems have caused inefficiency of engineering system utilization to get proper information and degraded engineering system utilization. KHNP has introduced and conducted advanced engineering processes to maintain equipment effectively in a highly reliable condition since 2000s. But engineering systems for process implementation have been developed in each department at a different time. This has caused the problems of process inefficiency and data discordance. Integrated Engineering System(IES) to integrate dispersed engineering processes will improve work efficiency and utilization of engineering system because integration system would enable engineer to get total engineering information easily and do engineering work efficiently

  15. Improvement of Engineering Work Efficiency through System Integration

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sangdae; Jo, Sunghan; Hyun, Jinwoo [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    This paper presents the concept of developing an integrated engineering system for ER to improve efficiency and utilization of engineering system. Each process including computer system and database was introduced separately by each department at that different time. Each engineering process has a close relation with other engineering processes. The introduction of processes in a different time has caused the several problems such as lack of interrelationship between engineering processes, lack of integration fleet-wide statistical data, lack of the function of data comparison among plants and increase of access time by different access location on internet. These problems have caused inefficiency of engineering system utilization to get proper information and degraded engineering system utilization. KHNP has introduced and conducted advanced engineering processes to maintain equipment effectively in a highly reliable condition since 2000s. But engineering systems for process implementation have been developed in each department at a different time. This has caused the problems of process inefficiency and data discordance. Integrated Engineering System(IES) to integrate dispersed engineering processes will improve work efficiency and utilization of engineering system because integration system would enable engineer to get total engineering information easily and do engineering work efficiently.

  16. Evaluation and Improvement of Lighting Efficiency in Working Spaces

    Directory of Open Access Journals (Sweden)

    Ana Castillo-Martinez

    2018-04-01

    Full Text Available Lighting is an essential element for modern life, promoting a sense of wellbeing for users. However, bad illumination may produce health problems such as headaches and fatigue, among other vision problems. For that reason, this paper proposes the development of a smartphone-based application to help in lighting evaluation to guarantee the compliance of illumination regulations and to help increase illuminance efficiency, reducing its energy consumption. To perform this evaluation, the smartphone can be used as a lighting measurement tool, evaluating those measurements through an intelligent agent based in rules capable of guiding the decision-making process. As a result, this tool allows the evaluation of the real working environment to guarantee lighting requirements, helping in the prevention of health problems derived from bad illumination and improving the lighting efficiency at the same time.

  17. Dental ergonomics: Basic steps to enhance work efficiency

    Directory of Open Access Journals (Sweden)

    Abdul Rahim Shaik

    2015-01-01

    Full Text Available The nature of the dental profession and the postures assumed by the dental surgeons during their professional work has a huge impact on the dental surgeon′s body and carries with it a high risk of musculoskeletal disorders (MSDs. To perform efficiently and effectively, they shall always like to attain a position that allows them to achieve optimum access, visibility, comfort, and control at all times. Good ergonomic design of the workplace is a basic requirement for facilitating the balanced musculoskeletal health that will enable longer, healthier career, enhance productivity, and minimize MSDs among dental surgeons. While treating the patients, they are concerned about patients′ comfort and pay little attention to their own health till they begin to experience discomfort in their body. With a little attention and creativity, dental surgeons can improve their comfort on the job during the course of their career.

  18. Analysis of remote working practice AND CALCULATION OF ECONOMIC EFFICIENCY

    OpenAIRE

    K. S. Ermakov; A. V. Savyolova

    2015-01-01

    The article is devoted to description of working from home practice at Allianz Insurance UK и Ernst & Young, UK & Ireland. It fulfilled the analysis of the best practices in the use of new forms of social and labor relations - remote work. The characteristics of using types of distance work, the policy of implementation and realization of such work in the company, the criteria for the transfer of employees to work remotely, the possibility of a flexible approach to workflow are given. The cal...

  19. Energy-efficient buildings: Does the marketplace work?

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.A.

    1996-12-31

    For a variety of reasons, U.S. households, businesses, manufacturers, and government agencies all fail to take full advantage of cost-effective, energy-efficiency opportunities. Despite a growing environmental ethic among Americans and a concern for energy independence, consumers in this country are underinvesting in technologies, products, and practices that would cut their energy bills. The result is a large untapped potential for improving energy productivity, economic competitiveness, environmental quality, and energy security. The thesis of this paper is that the marketplace for energy efficiency, in general, is not operating perfectly, and the marketplace for energy-efficient buildings, in particular, is flawed. The reasons for underinvestments in cost-effective, energy efficiency are numerous and complicated. They also vary from sector to sector: the principal causes of energy inefficiencies in agriculture, manufacturing, and transportation are not the same as the causes of inefficiencies in homes and office buildings, although there are some similarities. One of the reasons for these differences is that the structure of marketplace for delivering new technologies and products in each sector differs. Energy-efficiency improvements in the buildings sector is critical to reducing greenhouse gas emissions, since most of the energy consumed in buildings comes from the burning of fossil fuels. This paper therefore begins by describing energy use and energy trends in the U.S. buildings sector. Characteristics of the marketplace for delivering energy efficiency technologies and products are then described in detail, arguing that this marketplace structure significantly inhibits rapid efficiency improvements.

  20. Work management practices that reduce dose and improve efficiency

    International Nuclear Information System (INIS)

    Miller, D.W.; Hulin, M.

    1998-01-01

    Work management practices at nuclear power plants can dramatically affect the outcome of annual site dose goals and outage costs. This presentation discusses global work management practices that contribute to dose reduction including work philosophy, work selection, work planning, work scheduling, worker training, work implementation and worker feedback. The presentation is based on a two-year international effort (sponsored by NEA/IAEA ISOE) to study effective work practices that reduce dose. Experts in this area believe that effective work selection and planning practices can substantially reduce occupational dose during refueling outages. For example, some plants represented in the expert group complete refueling outages in 12-18 days (Finland) with doses below 0,90 person-Sv. Other plants typically have 50-75 day outages with substantially higher site doses. The fundamental reasons for longer outages and higher occupational doses are examined. Good work management principles that have a proven track record of reducing occupational dose are summarized. Practical methods to reduce work duration and dose are explained. For example, scheduling at nuclear power plants can be improved by not only sequencing jobs on a time line but also including zone and resource-based considerations to avoid zone congestion and manpower delays. An ongoing, global, benchmarking effort is described which provides current duration and dose information for repetitive jobs to participating utilities world-wide. (author)

  1. Creating Efficient Schools: The Wonder Is They Work at All.

    Science.gov (United States)

    Guthrie, James W.

    Present and past efforts to enhance school efficiency have failed. Progressive Era reforms of a half-century ago contributed to the creation of a publicly insensitive, professionally dominated education system. Accountability enthusiasts of the '70s failed to understand the fundamental misalignment between the assumptions underlying private sector…

  2. Evaluation and Improvement of Lighting Efficiency in Working Spaces

    OpenAIRE

    Ana Castillo-Martinez; Jose-Amelio Medina-Merodio; Jose-Maria Gutierrez-Martinez; Juan Aguado-Delgado; Carmen de-Pablos-Heredero; Salvador Otón

    2018-01-01

    Lighting is an essential element for modern life, promoting a sense of wellbeing for users. However, bad illumination may produce health problems such as headaches and fatigue, among other vision problems. For that reason, this paper proposes the development of a smartphone-based application to help in lighting evaluation to guarantee the compliance of illumination regulations and to help increase illuminance efficiency, reducing its energy consumption. To perform this evaluation, the smartph...

  3. Changes in brain network efficiency and working memory performance in aging.

    Science.gov (United States)

    Stanley, Matthew L; Simpson, Sean L; Dagenbach, Dale; Lyday, Robert G; Burdette, Jonathan H; Laurienti, Paul J

    2015-01-01

    Working memory is a complex psychological construct referring to the temporary storage and active processing of information. We used functional connectivity brain network metrics quantifying local and global efficiency of information transfer for predicting individual variability in working memory performance on an n-back task in both young (n = 14) and older (n = 15) adults. Individual differences in both local and global efficiency during the working memory task were significant predictors of working memory performance in addition to age (and an interaction between age and global efficiency). Decreases in local efficiency during the working memory task were associated with better working memory performance in both age cohorts. In contrast, increases in global efficiency were associated with much better working performance for young participants; however, increases in global efficiency were associated with a slight decrease in working memory performance for older participants. Individual differences in local and global efficiency during resting-state sessions were not significant predictors of working memory performance. Significant group whole-brain functional network decreases in local efficiency also were observed during the working memory task compared to rest, whereas no significant differences were observed in network global efficiency. These results are discussed in relation to recently developed models of age-related differences in working memory.

  4. Expected Improvements in Work Truck Efficiency Through Connectivity and Automation

    Energy Technology Data Exchange (ETDEWEB)

    Walkowicz, Kevin A [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-03-12

    This presentation focuses on the potential impact of connected and automated technologies on commercial vehicle operations. It includes topics such as the U.S. Department of Energy's Energy Efficient Mobility Systems (EEMS) program and the Systems and Modeling for Accelerated Research in Transportation (SMART) Mobility Initiative. It also describes National Renewable Energy Laboratory (NREL) research findings pertaining to the potential energy impacts of connectivity and automation and stresses the need for integration and optimization to take advantage of the benefits offered by these transformative technologies while mitigating the potential negative consequences.

  5. Summary of Country Reports Submitted to the Energy Efficiency Working Party: October 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The purpose of this summary report is to highlight energy efficiency policy action and planning in IEA member countries submited to the Energy Efficiency Working Party (EEWP) from March to September 2011.

  6. Work-Efficient Parallel Skyline Computation for the GPU

    DEFF Research Database (Denmark)

    Bøgh, Kenneth Sejdenfaden; Chester, Sean; Assent, Ira

    2015-01-01

    offers the potential for parallelizing skyline computation across thousands of cores. However, attempts to port skyline algorithms to the GPU have prioritized throughput and failed to outperform sequential algorithms. In this paper, we introduce a new skyline algorithm, designed for the GPU, that uses...... a global, static partitioning scheme. With the partitioning, we can permit controlled branching to exploit transitive relationships and avoid most point-to-point comparisons. The result is a non-traditional GPU algorithm, SkyAlign, that prioritizes work-effciency and respectable throughput, rather than...

  7. Transaction costs of raising energy efficiency. Working paper

    Energy Technology Data Exchange (ETDEWEB)

    Ostertag, K. [Fraunhofer-Institut fuer Systemtechnik und Innovationsforschung (ISI), Karlsruhe (Germany); Centre International de Recherche sur l' Environnement et le Developpement (CIRED), 94 - Nogent sur Marne (France)

    1999-05-01

    In the face of the uncertainties concerning the importance and the actual impacts of anthropogeneous climate change the extent to which measures should be adopted to avoid greenhouse gas emissions (GHG) already today and in the near future is highly controversial. More specifically, part of the debate evolves around the existence and importance of energy saving potentials to reduce CO{sub 2} emissions that may be available at negative net costs, implying that the energy cost savings of one specific technology can actually more than offset the costs of investing into this technology and of using it. This so called 'no-regret' potential would comprise measures that from a pure economic efficiency point of view would be 'worth undertaking whether or not there are climate-related reasons for doing so' (Bruce et al. 1996, p. 271). The existence of the no-regret potential is often denied by arguing, that the economic evaluation of the energy saving potentials did not take into account transaction costs (Grubb et al. 1993). This paper will examine in more detail the concept of transaction costs as it is used in the current debate on no-regret potentials (section 1). Four practical examples are presented to illustrate how transaction costs and their determinants can be identified, measured and possibly influenced (section 2). In order to link the presented cases to modelling based evaluation approaches the implications for cost evaluations of energy saving measures especially in the context of energy system modelling will be shown (section 3). (orig.)

  8. Summary of Country Reports Submitted to the Energy Efficiency Working Party - October 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The purpose of this summary report is to highlight energy efficiency policy action and planning in IEA member countries since the last meeting of the Energy Efficiency Working Party (EEWP) held in March 2011. This paper provides an overview of energy efficiency developments across all sectors, but is not meant to be a comprehensive review of every energy efficiency-related policy in IEA member countries.

  9. EFFICIENT MANAGEMENT OF WORKING CAPITAL: A STUDY OF HEATHCARE SECTOR IN INDIA

    Directory of Open Access Journals (Sweden)

    Harsh, Vineet, KAUR

    2014-11-01

    Full Text Available Efficient management of working capital means management of various components of working capital in such a way that an adequate amount of working capital is maintained for smooth running of a firm and for fulfilment of twin objectives of liquidity and profitability. Also it is the most crucial factor for survival and solvency of a concern. The present paper attempts to measure the efficiency of working capital of firms in Healthcare Sector in India. The study reveals that most of the firms of this sector have efficiently managed their current assets for the purpose of generation of sales. Further more efficient management of working capital has a positive effect on Income to Average total assets.

  10. Molecular Entropy, Thermal Efficiency, and Designing of Working Fluids for Organic Rankine Cycles

    Science.gov (United States)

    Wang, Jingtao; Zhang, Jin; Chen, Zhiyou

    2012-06-01

    A shortage of fossil energy sources boosts the utilization of renewable energy. Among numerous novel techniques, recovering energy from low-grade heat sources through power generation via organic Rankine cycles (ORCs) is one of the focuses. Properties of working fluids are crucial for the ORC's performance. Many studies have been done to select proper working fluids or to design new working fluids. However, no researcher has systematically investigated the relationship between molecular structures and thermal efficiencies of various working fluids for an ideal ORC. This paper has investigated the interrelations of molecular structures, molecular entropies, and thermal efficiencies of various working fluids for an ideal ORC. By calculating thermal efficiencies and molecular entropies, we find that the molecular entropy is the most appropriate thermophysical property of a working fluid to determine how much energy can be converted into work and how much cannot in a system. Generally speaking, working fluids with low entropies will generally have high thermal efficiency for an ideal ORC. Based on this understanding, the direct interrelations of molecular structures and entropies provide an explicit interrelation between molecular structures and thermal efficiencies, and thus provide an insightful direction for molecular design of novel working fluids for ORCs.

  11. Task complexity as a driver for collaborative learning efficiency: The collective working-memory effect

    NARCIS (Netherlands)

    Kirschner, Femke; Paas, Fred; Kirschner, Paul A.

    2010-01-01

    Kirschner, F., Paas, F., & Kirschner, P. A. (2011). Task complexity as a driver for collaborative learning efficiency: The collective working-memory effect. Applied Cognitive Psychology, 25, 615–624. doi: 10.1002/acp.1730.

  12. Estimation of efficiency of dust suppressing works at 30-km zone near the Chernobyl' NPP

    International Nuclear Information System (INIS)

    Bakin, R.I.; Tkachenko, A.V.; Sukhoruchkin, A.K.

    1989-01-01

    Data on efficiency of dust suppressing works at 30-km zone near NPP are analyzed. It is necessary: to reduce radionuclide content in the air in the spring, when the weather is dry, to conduct dust suppressing works on roads and sections of surface with nonfixed ground; in the summer, to wash roads every day. 3 figs

  13. Trait anxiety and the neural efficiency of manipulation in working memory

    NARCIS (Netherlands)

    Basten, U.; Stelzel, C.; Fiebach, C.J.

    2012-01-01

    The present study investigates the effects of trait anxiety on the neural efficiency of working memory component functions (manipulation vs. maintenance) in the absence of threat-related stimuli. For the manipulation of affectively neutral verbal information held in working memory, high- and

  14. The effect of work accidents on the efficiency of production in the coal sector

    Directory of Open Access Journals (Sweden)

    Yaşar Kasap

    2011-05-01

    Full Text Available In comparison with other sectors, mining is one of the sectors with the highest rates of work accidents. Such accidents negatively affect a country’s economy by wasting domestic resources and causing losses of both labour force and working days. What distinguishes mining from other branches of industry is that its working environments change continually and the working conditions are particularly harsh. Because of the practice of labour-intensive underground production methods, which leads to an increase in risk factors in terms of work accidents, and the fact that coal is a leading resource in meeting the ever-increasing demand for energy, this study investigated how work accidents affected the efficiency of production in the Turkish Hard Coal Enterprise (TTK between 1987 and 2006. Using data envelopment analysis, the overall sources of technical inefficiency in the years examined were determined. The results from this analysis revealed that the overall technical efficiency was as low as 69.7%, particularly as a result of the disaster in 1992; work accidents therefore had a negative effect on production efficiency. The greatest degree of pure technical inefficiency was found to have occurred in the period between 1992 and 2000, when the highest number of work accidents were noted, whilst the greatest degree of scale inefficiency was found to have occurred between 1987 and 1993. Because TTK has a prominent position among institutions and attaches great importance to workers’ health and safety, an increase was noted in efficiency scores after 1993.

  15. Useful work and the thermal efficiency in the ideal Lenolr cycle with regenerative preheating

    Science.gov (United States)

    Georgiou, Demos P.

    2000-11-01

    In the existing thermal engine concepts negative work transfer (usually needed to drive a compression process) is supplied by the work produced by the engine itself. The remaining difference (i.e., the net work transfer) becomes the useful work, since it is available for external consumption. The thermal efficiency is the parameter that compares this against the heat input into the system. It forms the main optimization parameter in any engine design. The objective of the present study is to show that for the case of the Lenoir cycle with regenerative preheating the entire positive work is available for external consumption, since the negative (i.e., the compression) work is supplied by the atmospheric air. Not only this, but, during the compression process and due to the pressure difference across the two sides of the moving piston, an additional (useful) work transfer may be generated. Thus, the proposed power plant may be considered as a combination of a thermal engine and a wind turbine. In the ideal cycle limit (at least), the total amount of useful work exceeds the heat entering the system. This leads to the definition of a new parameter for the efficiency (called the technical efficiency), which compares the combined positive work transfer (i.e., the useful one) against the heat entering the system and which may exceed the 100% level.

  16. Effective information flow through efficient supply chain management - Value stream mapping approach Case Outokumpu Tornio Works

    OpenAIRE

    Juvonen, Piia

    2012-01-01

    ABSTRACT Juvonen, Piia Suvi Päivikki 2012. Effective information flow through efficient supply chain management -Value stream mapping approach - Case Outokumpu Tornio Works. Master`s Thesis. Kemi-Tornio University of Applied Sciences. Business and Culture. Pages 63. Appendices 2. The general aim of this thesis is to explore effective information flow through efficient supply chain management by following one of the lean management principles, value stream mapping. The specific research...

  17. Summary of Country Reports Submitted to the Energy Efficiency Working Party - January 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The purpose of the January 2010 Country Report Summary is to highlight energy efficiency policy action and planning in IEA member countries since the previous meeting of the Energy Efficiency Working Party (EEWP) held in September 2009. This paper is not meant to be a comprehensive review of every energy efficiency-related policy in IEA member countries. In all of the country reports received, there is evidence of significant energy efficiency policy action. The most significant observations from these country reports cover three areas. The first is that the spending focus on energy efficiency seen in the previous two country reports (31 March and 15 September 2009) appears largely unchanged, and is still concentrated in the building sector. Second, countries are actively undertaking analysis and public consultation to plan for future projects. Third, many countries reported activity taking place in the area of fiscal policy, from amendments to new fiscal measures.

  18. [Great depth pneumatic caisson and its load work involved with the efficiency of respiratory protection].

    Science.gov (United States)

    Shibayama, M; Oda, S; Takeuchi, J; Ikeda, Y; Yamamura, I; Mano, Y

    1989-07-01

    Pneumatic caisson work in Japan has been in operation since 1924. Afterward, this technique of compressed air work has been utilized in the constructions like as foundation works, the basements, and shafts of the bottom tunnel or shields for subway and so forth. While, it means for people to be exposed to hyperbaric environment that they use compressed air work, this technique has risks to be suffered from not only decompression sickness (DCS) but toxicity of poisonous gas or oxygen deficiency. However, this technique is necessary for urban civil engineering and recent compressed air works over than 1.0 kg/cm2 has been increased in 1.5 times more than in 1970's and the higher compressed air work more than 4.0 kg/cm2 will be actually planned in near future. So unmanned caisson work is considered as a better technique for such high pressure work, even though people must enter into hyperbaric working fields for maintenance or repair of unmanned operated machinery and materials. This research is to establish the safety work under hyperbaric environment within 7 kg/cm2. It is necessary for us to establish the system not only to keep safety but to maintain working efficiency. According to obtain the purpose, the effect of respiratory protection has been investigated and work load under hyperbaric caisson work has also been studied.

  19. Summary of Country Reports Submitted to the Energy Efficiency Working Party - September 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The purpose of this summary report is to highlight energy efficiency policy action and planning in IEA member countries since the last meeting of the Energy Efficiency Working Party (EEWP)1 held in January 2010. This paper provides an overview of energy efficiency developments across all sectors, but is not meant to be a comprehensive review of every energy efficiency-related policy in IEA member countries. At the request of the EEWP, this issue of the country report summary focuses primarily on transport. Countries reported a wide range of energy efficiency policy activity. Compared with past reports, energy efficiency policy planning seems to be giving way to programme implementation in the buildings, lighting and appliances sectors. Planning and implementation is underway in the transport sector. Measures in the transport sector are diverse and include financial support for electric vehicle R&D and pilot projects, fiscal policies to encourage the purchase of efficient vehicles, eco-drive programmes and vehicle labelling. Measures of note outside the transport sector include the promotion of smart metering.

  20. A method of evaluating efficiency during space-suited work in a neutral buoyancy environment

    Science.gov (United States)

    Greenisen, Michael C.; West, Phillip; Newton, Frederick K.; Gilbert, John H.; Squires, William G.

    1991-01-01

    The purpose was to investigate efficiency as related to the work transmission and the metabolic cost of various extravehicular activity (EVA) tasks during simulated microgravity (whole body water immersion) using three space suits. Two new prototype space station suits, AX-5 and MKIII, are pressurized at 57.2 kPa and were tested concurrently with the operationally used 29.6 kPa shuttle suit. Four male astronauts were asked to perform a fatigue trial on four upper extremity exercises during which metabolic rate and work output were measured and efficiency was calculated in each suit. The activities were selected to simulate actual EVA tasks. The test article was an underwater dynamometry system to which the astronauts were secured by foot restraints. All metabolic data was acquired, calculated, and stored using a computerized indirect calorimetry system connected to the suit ventilation/gas supply control console. During the efficiency testing, steady state metabolic rate could be evaluated as well as work transmitted to the dynamometer. Mechanical efficiency could then be calculated for each astronaut in each suit performing each movement.

  1. An organic group contribution approach to radiative efficiency estimation of organic working fluid

    International Nuclear Information System (INIS)

    Zhang, Xinxin; Kobayashi, Noriyuki; He, Maogang; Wang, Jingfu

    2016-01-01

    Highlights: • We use group contribution method to estimate radiative efficiency. • CFC, HCFC, HFC, HFE, and PFC were estimated using this method. • In most cases, the estimation value has a good precision. • The method is reliable for the estimation of molecule with a symmetric structure. • This estimation method can offer good reference for working fluid development. - Abstract: The ratification of the Montreal Protocol in 1987 and the Kyoto Protocol in 1997 mark an environment protection era of the development of organic working fluid. Ozone depletion potential (ODP) and global warming potential (GWP) are two most important indices for the quantitative comparison of organic working fluid. Nowadays, more and more attention has been paid to GWP. The calculation of GWP is an extremely complicated process which involves interactions between surface and atmosphere such as atmospheric radiative transfer and atmospheric chemical reactions. GWP of a substance is related to its atmospheric abundance and is a variable in itself. However, radiative efficiency is an intermediate parameter for GWP calculation and it is a constant value used to describe inherent property of a substance. In this paper, the group contribution method was adopted to estimate the radiative efficiency of the organic substance which contains more than one carbon atom. In most cases, the estimation value and the standard value are in a good agreement. The biggest estimation error occurs in the estimation of the radiative efficiency of fluorinated ethers due to its plenty of structure groups and its complicated structure compared with hydrocarbon. This estimation method can be used to predict the radiative efficiency of newly developed organic working fluids.

  2. The effects of two types of sleep deprivation on visual working memory capacity and filtering efficiency.

    Directory of Open Access Journals (Sweden)

    Sean P A Drummond

    Full Text Available Sleep deprivation has adverse consequences for a variety of cognitive functions. The exact effects of sleep deprivation, though, are dependent upon the cognitive process examined. Within working memory, for example, some component processes are more vulnerable to sleep deprivation than others. Additionally, the differential impacts on cognition of different types of sleep deprivation have not been well studied. The aim of this study was to examine the effects of one night of total sleep deprivation and 4 nights of partial sleep deprivation (4 hours in bed/night on two components of visual working memory: capacity and filtering efficiency. Forty-four healthy young adults were randomly assigned to one of the two sleep deprivation conditions. All participants were studied: 1 in a well-rested condition (following 6 nights of 9 hours in bed/night; and 2 following sleep deprivation, in a counter-balanced order. Visual working memory testing consisted of two related tasks. The first measured visual working memory capacity and the second measured the ability to ignore distractor stimuli in a visual scene (filtering efficiency. Results showed neither type of sleep deprivation reduced visual working memory capacity. Partial sleep deprivation also generally did not change filtering efficiency. Total sleep deprivation, on the other hand, did impair performance in the filtering task. These results suggest components of visual working memory are differentially vulnerable to the effects of sleep deprivation, and different types of sleep deprivation impact visual working memory to different degrees. Such findings have implications for operational settings where individuals may need to perform with inadequate sleep and whose jobs involve receiving an array of visual information and discriminating the relevant from the irrelevant prior to making decisions or taking actions (e.g., baggage screeners, air traffic controllers, military personnel, health care

  3. The effects of two types of sleep deprivation on visual working memory capacity and filtering efficiency.

    Science.gov (United States)

    Drummond, Sean P A; Anderson, Dane E; Straus, Laura D; Vogel, Edward K; Perez, Veronica B

    2012-01-01

    Sleep deprivation has adverse consequences for a variety of cognitive functions. The exact effects of sleep deprivation, though, are dependent upon the cognitive process examined. Within working memory, for example, some component processes are more vulnerable to sleep deprivation than others. Additionally, the differential impacts on cognition of different types of sleep deprivation have not been well studied. The aim of this study was to examine the effects of one night of total sleep deprivation and 4 nights of partial sleep deprivation (4 hours in bed/night) on two components of visual working memory: capacity and filtering efficiency. Forty-four healthy young adults were randomly assigned to one of the two sleep deprivation conditions. All participants were studied: 1) in a well-rested condition (following 6 nights of 9 hours in bed/night); and 2) following sleep deprivation, in a counter-balanced order. Visual working memory testing consisted of two related tasks. The first measured visual working memory capacity and the second measured the ability to ignore distractor stimuli in a visual scene (filtering efficiency). Results showed neither type of sleep deprivation reduced visual working memory capacity. Partial sleep deprivation also generally did not change filtering efficiency. Total sleep deprivation, on the other hand, did impair performance in the filtering task. These results suggest components of visual working memory are differentially vulnerable to the effects of sleep deprivation, and different types of sleep deprivation impact visual working memory to different degrees. Such findings have implications for operational settings where individuals may need to perform with inadequate sleep and whose jobs involve receiving an array of visual information and discriminating the relevant from the irrelevant prior to making decisions or taking actions (e.g., baggage screeners, air traffic controllers, military personnel, health care providers).

  4. Design of multisegmented freeform lens for LED fishing/working lamp with high efficiency.

    Science.gov (United States)

    Lai, Min-Feng; Anh, Nguyen Doan Quoc; Gao, Jia-Zhi; Ma, Hsin-Yi; Lee, Hsiao-Yi

    2015-10-01

    A novel LED fishing/working light is proposed to enhance the lighting efficiency of a fishing boat. The study is focused on the freeform secondary lens design so as to create a lamp that attracts fish and sheds light on the deck for the crew's work. The experimental results show that the proposed multisegmented freeform lens can deliver the proposed aim, giving 3 times as much illuminating power as the traditional high-intensity discharge fishing lamp does with the same input of electrical power.

  5. Fundamental Aeronautics Program: Overview of Project Work in Supersonic Cruise Efficiency

    Science.gov (United States)

    Castner, Raymond

    2011-01-01

    The Supersonics Project, part of NASA?s Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2011) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

  6. Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

    Science.gov (United States)

    Castner, Ray

    2012-01-01

    The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

  7. Take-Off Efficiency: Transformation of Mechanical Work Into Kinetic Energy During the Bosco Test

    Directory of Open Access Journals (Sweden)

    Jandova Sona

    2017-09-01

    Full Text Available Purpose. The aim of the study is to present a new method for determining the efficiency of take-off during a 60-s Bosco repeated vertical jump test. Method. The study involved 15 physical education students (age: 21.5 ± 2.4 years; height: 1.81 ± 0.08 m; mass: 76 ± 9 kg. The data were collected with the use of a pedobarographical system (Pedar-x; Novel, Munich, Germany. The statistical analysis utilized a simple linear regression model. Results. Owing to possible fatigue, flight time and flight height decreased. The average flight height was 0.260 ± 0.063 m, and the average contact time equalled 0.54 ± 0.16 s. The average anaerobic power values calculated for the 60-s work period had the mean value of 21.9 ± 6.7 W · kgBW-1; there was a statistically significant (p < 0.05 decrease in anaerobic power during the 60-s Bosco test. Conclusions. The efficiency of mechanical work was highest at the beginning of the test, reaching values of up to 50%. The efficiency of mechanical work conversion into mechanical energy seems to be an appropriate determinant of rising fatigue during the 60-s Bosco jumping test.

  8. The impact of a mental work on food preferences, eating behavior traits and satiety efficiency.

    Science.gov (United States)

    Salama, Miram; Drapeau, Vicky; Tremblay, Angelo; Pérusse-Lachance, Émilie

    2016-02-01

    Sedentary lifestyles, which are partly due to the type of labor being performed, have contributed to the increased prevalence of obesity. In general, labor in a modern context solicits mental work, which has been shown to promote overeating and altered satiety efficiency. The aim of this study was to evaluate the impact of knowledge-based work on food preferences, eating behaviors traits and appetite sensations. The relationship between these effects and the morphological profile was also assessed. A cross-over experimental design was used in this study for which 35 healthy adults (22 men and 13 women (mean age: 24±3years)), were recruited. The participants were randomly assigned the one of the two following conditions: mental work (reading a document and writing a summary of 350 words with the use of a computer) or control (rest in seated position). Each condition lasted 45min, and was followed by a standardized ad libitum buffet-type meal. Measurements included anthropometric variables, ad libitum food intake, appetite sensations before and after each condition, and satiety quotient, a marker of satiety efficiency in response to the meal. Eating behavior traits were also evaluated using the Three-Factor Eating Questionnaire (TFEQ). Eating behaviors (restriction, disinhibition) were not associated with the energy intake in both conditions and in both genders. Women appeared to have a higher energy intake after the mental work condition (pwork. These results suggest that increased energy intake in response to knowledge-based work is associated with food preference and an altered satiety efficiency in women and individuals with higher waist circumference. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Processing efficiency theory in children: working memory as a mediator between trait anxiety and academic performance.

    Science.gov (United States)

    Owens, Matthew; Stevenson, Jim; Norgate, Roger; Hadwin, Julie A

    2008-10-01

    Working memory skills are positively associated with academic performance. In contrast, high levels of trait anxiety are linked with educational underachievement. Based on Eysenck and Calvo's (1992) processing efficiency theory (PET), the present study investigated whether associations between anxiety and educational achievement were mediated via poor working memory performance. Fifty children aged 11-12 years completed verbal (backwards digit span; tapping the phonological store/central executive) and spatial (Corsi blocks; tapping the visuospatial sketchpad/central executive) working memory tasks. Trait anxiety was measured using the State-Trait Anxiety Inventory for Children. Academic performance was assessed using school administered tests of reasoning (Cognitive Abilities Test) and attainment (Standard Assessment Tests). The results showed that the association between trait anxiety and academic performance was significantly mediated by verbal working memory for three of the six academic performance measures (math, quantitative and non-verbal reasoning). Spatial working memory did not significantly mediate the relationship between trait anxiety and academic performance. On average verbal working memory accounted for 51% of the association between trait anxiety and academic performance, while spatial working memory only accounted for 9%. The findings indicate that PET is a useful framework to assess the impact of children's anxiety on educational achievement.

  10. The Influences of Quantum Coherence on the Positive Work and the Efficiency of Quantum Heat Engine with Working Substance of Two-Qubit Heisenberg XXX Model

    Science.gov (United States)

    Peng, Hu-Ping; Fang, Mao-Fa; Yu, Min; Zou, Hong-Mei

    2018-03-01

    We study the influences of quantum coherence on the positive work and the efficiency of quantum heat engine (QHE) based on working substance of two-qubit Heisenberg model under a constant external magnetic field. By using analytical and numerical solution, we give the relation expressions for both the positive work and the efficiency with quantum coherence, and in detail discuss the effects of the quantum coherence on the positive work and the efficiency of QHE in the absence or presence of external magnetic field, respectively.

  11. The Influences of Quantum Coherence on the Positive Work and the Efficiency of Quantum Heat Engine with Working Substance of Two-Qubit Heisenberg XXX Model

    Science.gov (United States)

    Peng, Hu-Ping; Fang, Mao-Fa; Yu, Min; Zou, Hong-Mei

    2018-06-01

    We study the influences of quantum coherence on the positive work and the efficiency of quantum heat engine (QHE) based on working substance of two-qubit Heisenberg model under a constant external magnetic field. By using analytical and numerical solution, we give the relation expressions for both the positive work and the efficiency with quantum coherence, and in detail discuss the effects of the quantum coherence on the positive work and the efficiency of QHE in the absence or presence of external magnetic field, respectively.

  12. Activities of the work efficiency institute`s department of forestry; Tyoetehoseuran metsaeosaston toiminta

    Energy Technology Data Exchange (ETDEWEB)

    Maekelae, J

    1997-12-31

    In accordance with the demarcation of tasks among Finnish forest-engineering research institutions, the Work Efficiency Institute`s Department of Forestry is the only one specialising in research and development focusing on forestry work involving low capital investments and done by landowners on their own estate or on a part-time basis outside their estates. This activity also includes the small-scale utilisation of wood and peat in heating. This bulletin presents a review of our recent research and development work. A significant stepping up of the utilisation of bioenerqy is one of the objectives of the Finnish Government. This has been noted in the Work Efficiency Institute`s Department of Forestry`s work programme in recent years by increasing the role of research and development promoting the consumption of bioenergy. As one of the participants in the National Bioenergy research programme (1993-1998), we are looking into the harvesting of small-diameter wood and wood residues, technology employed in the production of wood chips and fuelwood, cost calculations in fuelwood harvesting, energy entrepreneurship, and the development of fireplaces. Other recent topics of research engaged in by the Department of Forestry include possibilities in the mechanisation of tending of young stands, excavator-loaders in timber harvesting, and promoting self-reliance among landowners in carrying out of forestry work. On-going studies include comparison of pruning methods, a survey of co-operation among landowners at the local community level, and a study looking into the quality of wood produced for delivery sales. (orig.)

  13. Insights into the Influence of Work Functions of Cathodes on Efficiencies of Perovskite Solar Cells.

    Science.gov (United States)

    Yue, Shizhong; Lu, Shudi; Ren, Kuankuan; Liu, Kong; Azam, Muhammad; Cao, Dawei; Wang, Zhijie; Lei, Yong; Qu, Shengchun; Wang, Zhanguo

    2017-05-01

    Though various efforts on modification of electrodes are still undertaken to improve the efficiency of perovskite solar cells, attributing to the large scope of these methods, it is of significance to unveil the working principle systematically. Herein, inverted perovskite solar cells based on indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)/CH 3 NH 3 PbI 3 /phenyl-C61-butyric acid methyl ester (PC 61 BM)/buffer metal/Al are constructed. Through the choice of different buffer metals to tune work function of the cathode, the contact nature of the active layer with the cathode could be manipulated well. In comparison with the device using Au/Al as the electrode that shows an unfavorable band bending for conducting the excited electrons to the cathode, the one with Ca/Al presents a dramatically improved efficiency over 17.1%, ascribed to the favorable band bending at the interface of the cathode with the active layer. Details for tuning the band bending and the corresponding charge transfer mechanism are given in a systematic manner. Thus, a general guideline for constructing perovskite photovoltaic devices efficiently is provided. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Working memory load predicts visual search efficiency: Evidence from a novel pupillary response paradigm.

    Science.gov (United States)

    Attar, Nada; Schneps, Matthew H; Pomplun, Marc

    2016-10-01

    An observer's pupil dilates and constricts in response to variables such as ambient and focal luminance, cognitive effort, the emotional stimulus content, and working memory load. The pupil's memory load response is of particular interest, as it might be used for estimating observers' memory load while they are performing a complex task, without adding an interruptive and confounding memory test to the protocol. One important task in which working memory's involvement is still being debated is visual search, and indeed a previous experiment by Porter, Troscianko, and Gilchrist (Quarterly Journal of Experimental Psychology, 60, 211-229, 2007) analyzed observers' pupil sizes during search to study this issue. These authors found that pupil size increased over the course of the search, and they attributed this finding to accumulating working memory load. However, since the pupil response is slow and does not depend on memory load alone, this conclusion is rather speculative. In the present study, we estimated working memory load in visual search during the presentation of intermittent fixation screens, thought to induce a low, stable level of arousal and cognitive effort. Using standard visual search and control tasks, we showed that this paradigm reduces the influence of non-memory-related factors on pupil size. Furthermore, we found an early increase in working memory load to be associated with more efficient search, indicating a significant role of working memory in the search process.

  15. Optimization of the working process of the axial compressor according to the criterion of efficiency

    Science.gov (United States)

    Baturin, O. V.; Popov, G. M.; Goryachkin, E. S.; Novikova, Yu D.

    2017-01-01

    The paper shows search results of the optimal shape of low pressure compressor blades of the industrial gas turbine plant using methods of computational fluid dynamics and multicriteria methods of mathematical optimization. The essence of the methods is that an increase in compressor efficiency should be achieved by increasing the degree of compression up to 2%, and reducing the air flow to 8% relative to basic engine parameters. However, the compressor design elements should be retained as maximally unchanged as possible. During the work, the calculation model of the workflow in the test compressor has been developed and verified in the NUMECA software package, the automated algorithm of the blades shape change has been also developed using a small number of variables, while maintaining its stress-strain state. It allows reducing the number of changeable variables more than twofold. As the result of this study, the option of compressor performance was found, which can increase its efficiency by 1.3% (abs.).

  16. Fluorescence spectroscopy as a tool for determination of organic matter removal efficiency at water treatment works

    Directory of Open Access Journals (Sweden)

    M. Z. Bieroza

    2010-04-01

    Full Text Available Organic matter (OM in drinking water treatment is a common impediment responsible for increased coagulant and disinfectant dosages, formation of carcinogenic disinfection-by products, and microbial re-growth in distribution system. The inherent heterogeneity of OM implies the utilization of advanced analytical techniques for its characterization and assessment of removal efficiency. Here, the application of simple fluorescence excitation-emission technique to OM characterization in drinking water treatment is presented. The fluorescence data of raw and clarified water was obtained from 16 drinking water treatment works. The reduction in fulvic-like fluorescence was found to significantly correlate with OM removal measured with total organic carbon (TOC. Fluorescence properties, fulvic- and tryptophan-like regions, were found to discriminate OM fractions of different removal efficiencies. The results obtained in the study show that fluorescence spectroscopy provides a rapid and accurate characterization and quantification of OM fractions and indication of their treatability in conventional water treatment.

  17. Efficiency at rest: magnetoencephalographic resting-state connectivity and individual differences in verbal working memory.

    Science.gov (United States)

    del Río, David; Cuesta, Pablo; Bajo, Ricardo; García-Pacios, Javier; López-Higes, Ramón; del-Pozo, Francisco; Maestú, Fernando

    2012-11-01

    Inter-individual differences in cognitive performance are based on an efficient use of task-related brain resources. However, little is known yet on how these differences might be reflected on resting-state brain networks. Here we used Magnetoencephalography resting-state recordings to assess the relationship between a behavioral measurement of verbal working memory and functional connectivity as measured through Mutual Information. We studied theta (4-8 Hz), low alpha (8-10 Hz), high alpha (10-13 Hz), low beta (13-18 Hz) and high beta (18-30 Hz) frequency bands. A higher verbal working memory capacity was associated with a lower mutual information in the low alpha band, prominently among right-anterior and left-lateral sensors. The results suggest that an efficient brain organization in the domain of verbal working memory might be related to a lower resting-state functional connectivity across large-scale brain networks possibly involving right prefrontal and left perisylvian areas. Copyright © 2012 Elsevier B.V. All rights reserved.

  18. Increasing the working efficiency of core lifter in a sectional turbobit

    Energy Technology Data Exchange (ETDEWEB)

    Shakhmaev, Z M; Kutepov, A I; Ganiev, G M

    1969-01-01

    Reasons for decreases of core recovery and decreases of drilling efficiency in core drilling are presented. One of the main faults with the turbobit is breakage of core lifter. As the length of the core lifter was increased, its strength was reduced. Use of ordinary tubing is not satisfactory with core lifters equipped with turbobits of 170 and 235 mm diam. The construction of lightweight alloy tubing (73 mm diam) for use with 235 mm turbobits is described. Tests showed that the lightweight core lifter assembly works satisfactorily. Schematic diagrams and descriptions of lightweight core lifters are supplied.

  19. Reduced prefrontal efficiency for visuospatial working memory in attention-deficit/hyperactivity disorder.

    Science.gov (United States)

    Bédard, Anne-Claude V; Newcorn, Jeffrey H; Clerkin, Suzanne M; Krone, Beth; Fan, Jin; Halperin, Jeffrey M; Schulz, Kurt P

    2014-09-01

    Visuospatial working memory impairments have been implicated in the pathophysiology of attention-deficit/hyperactivity disorder (ADHD). However, most ADHD research has focused on the neural correlates of nonspatial mnemonic processes. This study examined brain activation and functional connectivity for visuospatial working memory in youth with and without ADHD. Twenty-four youth with ADHD and 21 age- and sex-matched healthy controls were scanned with functional magnetic resonance imaging while performing an N-back test of working memory for spatial position. Block-design analyses contrasted activation and functional connectivity separately for high (2-back) and low (1-back) working memory load conditions versus the control condition (0-back). The effect of working memory load was modeled with linear contrasts. The 2 groups performed comparably on the task and demonstrated similar patterns of frontoparietal activation, with no differences in linear gains in activation as working memory load increased. However, youth with ADHD showed greater activation in the left dorsolateral prefrontal cortex (DLPFC) and left posterior cingulate cortex (PCC), greater functional connectivity between the left DLPFC and left intraparietal sulcus, and reduced left DLPFC connectivity with left midcingulate cortex and PCC for the high load contrast compared to controls (p 100 voxels). Reanalysis using a more conservative statistical approach (p 100 voxels) yielded group differences in PCC activation and DLPFC-midcingulate connectivity. Youth with ADHD show decreased efficiency of DLPFC for high-load visuospatial working memory and greater reliance on posterior spatial attention circuits to store and update spatial position than healthy control youth. Findings should be replicated in larger samples. Copyright © 2014 American Academy of Child and Adolescent Psychiatry. Published by Elsevier Inc. All rights reserved.

  20. Guided synthesis of accumulative solutions for the conceptual design of an efficient stove working with biomass

    International Nuclear Information System (INIS)

    Álvarez Cabrales, Alexis; Gaskins Espinosa, Benjamín Gabriel; Pérez Rodríguez, Roberto; Simeón Monet, Rolando Esteban

    2014-01-01

    The conceptual design is closely related to a product functional structure and the search of solution principles for its definition. This work exposes an accumulative method for the traceability of the functional structure that implements the guided conceptual synthesis of solutions in the preliminary analysis of this designing process stage. The method constitutes a contribution to Pahls and Beitzs classic design model. In it, the functional information system is manipulated, providing the designer with a help so that he can examine the different solutions that are obtained, giving him the possibility of selecting the most convenient one. The guided analysis of the accumulative solutions synthesis is illustrated by means of the conceptual design of an efficient stove working with biomass. (author)

  1. How phonological awareness mediates the relation between working memory and word reading efficiency in children with dyslexia.

    Science.gov (United States)

    Knoop-van Campen, Carolien A N; Segers, Eliane; Verhoeven, Ludo

    2018-05-01

    This study examined the relation between working memory, phonological awareness, and word reading efficiency in fourth-grade children with dyslexia. To test whether the relation between phonological awareness and word reading efficiency differed for children with dyslexia versus typically developing children, we assessed phonological awareness and word reading efficiency in 50 children with dyslexia (aged 9;10, 35 boys) and 613 typically developing children (aged 9;5, 279 boys). Phonological awareness was found to be associated with word reading efficiency, similar for children with dyslexia and typically developing children. To find out whether the relation between working memory and word reading efficiency in the group with dyslexia could be explained by phonological awareness, the children with dyslexia were also tested on working memory. Results of a mediation analysis showed a significant indirect effect of working memory on word reading efficiency via phonological awareness. Working memory predicted reading efficiency, via its relation with phonological awareness in children with dyslexia. This indicates that working memory is necessary for word reading efficiency via its impact on phonological awareness and that phonological awareness continues to be important for word reading efficiency in older children with dyslexia. © 2018 The Authors Dyslexia Published by John Wiley & Sons Ltd.

  2. Flagellum motion in 2-D: Work rate and efficiency of the non-sinusoidal approach

    Science.gov (United States)

    Viridi, Sparisoma; Nuraini, Nuning; Stephanie, Monica; Rifqi, Ainur; Christina, Dina; Thania, Elsa; Sihite, Erland

    2018-03-01

    Today microorganisms have been widely used to support human life. Some examples include foodstuffs (Spirulina.sp), to help with medical needs, for mining purposes and more. On the other hand, the development of technology is also very big influence on human life. The combination of technology and health science will be very useful if we can develop it. One is the cancer treatment by utilizing the movement of the flagella to be made a nanorobot used as a carrier of cancer drugs. Movement of flagella that resembles the shape of the arc and straight line can be searched formulation and then applied to the manufacture of nanorobot tail. Then the nanorobot will carry a cancer drug that leads directly to the cancer cells. So hopefully with this nanorobot, can minimize the death of healthy cells around cancer cells. From the results of research and analysis of the movement of flagella, it can be concluded that the smaller the mass of the flagella, the greater the efficiency will be or will be more efficient. So, the energy needed nanorobot will be smaller. Model with non-sinusoidal approach (Brokaw, 1965) is discussed in this work and formulation to get the energy efficiency is proposed and analyzed. Unfortunately, there is a negative value in the formulation.

  3. Action plan for energy efficiency 2003-2006. A Working Group Proposal

    International Nuclear Information System (INIS)

    2003-02-01

    The updating of the Action Plan for Energy Efficiency is closely related to the need to further intensify measures for promoting energy conservation that was highlighted in the debate in Parliament on the National Climate Strategy and building of a new nuclear power plant. The Working Group with responsibility for the preparation of the updating has made an assessment of the implementation and impact of the previous Action Plan for Energy Efficiency and sought to come up with new measures and ways of increasing the effect of the actions in the previous action plan. The main instruments presented in the updated action plan are developing new technologies, economic instruments, energy conservation agreements, laws and regulations and information and training. The action plan comprises proposals for increasing the budget for energy subsidies for companies and bodies and finding new formulas for the funding of energy saving investments. Further, the aid for the renovation of buildings is proposed to be enhanced. More effort is also needed as concerns disseminating information on energy saving. The development of new technologies requires that the funding from the National Technology Agency (Tekes) for energy efficiency is kept at least at the level of 1999. An implementation of the measures proposed would require a contribution from the state amounting to about E 80 million per year. The system of Energy Conservation Agreements is proposed to be further extended and developed. The agreements could to a larger extent than before cover research and product development processes and processes for purchasing of goods and services. The Working Group proposes further examination of the possibility of imposing binding targets and applying sanctions. Energy taxation is proposed to be developed further in order to promote energy saving and co- generation with the impact of the future Directive on emission allowance trading in mind. New research and development projects are

  4. Visual Working Memory Capacity Can Be Increased by Training on Distractor Filtering Efficiency.

    Science.gov (United States)

    Li, Cui-Hong; He, Xu; Wang, Yu-Juan; Hu, Zhe; Guo, Chun-Yan

    2017-01-01

    It is generally considered that working memory (WM) capacity is limited and that WM capacity affects cognitive processes. Distractor filtering efficiency has been suggested to be an important factor in determining the visual working memory (VWM) capacity of individuals. In the present study, we investigated whether training in visual filtering efficiency (FE) could improve VWM capacity, as measured by performance on the change detection task (CDT) and changes of contralateral delay activity (CDA) (contralateral delay activity) of different conditions, and evaluated the transfer effect of visual FE training on verbal WM and fluid intelligence, as indexed by performance on the verbal WM span task and Raven's Standard Progressive Matrices (RSPM) test, respectively. Participants were divided into high- and low-capacity groups based on their performance in a CDT designed to test VWM capacity, and then the low-capacity individuals received 20 days of FE training. The training significantly improved the group's performance in the CDT, and their CDA models of different conditions became more similar with high capacity group, and the effect generalized to improve verbal WM span. These gains were maintained at a 3-month follow-up test. Participants' RSPM scores were not changed by the training. These findings support the notion that WM capacity is determined, at least in part, by distractor FE and can be enhanced through training.

  5. Efficiency of Staging Work-Ups in the Evaluation of Carcinoma of the Uterine Cervix

    International Nuclear Information System (INIS)

    Kim, Jae Sung; Ha, Sung Whan

    1991-01-01

    A series of 510 patients with carcinoma of the uterine cervix given the curative radiation therapy from March 1979 through December 1986 was evaluated to determine the value of intravenous pyelography(IVP), cystoscopy, sigmoidoscopy, and abdomino-pelvic CT as staging work-up prior to treatment. On IVP and cystoscopy, 10.7%(49/456) and 5/3%(24/452) showed abnormality, respectively, but only 0.7% (3/413) did on signoidoscopy. As a result of these work-ups prerequisite to FIGO staging, twenty six (5.1%) out of 510 patients were upstaged from the stage determined by the findings of physical examination alone. The proportions of upstaging in each stage were as follows none in stage IB(35), IIA (89) and IIIA(8), 7.9%(20/252) in stage IIB(14 patients to FIGO Stage IIIB, 6 patients to FIGO stage IVA), and 4.8% (6/126) in stage IIIB (all to FIGO stage IVA). Positive findings of staging work-ups were found only in patients with advanced stages of stage IIB or over determined by physical examination alone but not in those with earlier stages. CT was performed in 337 patients. CT detected pelvic lymph node (LN) enlargement in 25.2% (85/337) and paraaortic LN enlargement in 7.4% (25/337). Pelvic LN positivity was well correlated with increasing stage but paraaortic LN positivity was not. In the evaluation of parametrial involvement, CT findings were in accordance with those of physical examination only in 65.6%(442/674). When compared with endoscopic studies, CT had much lower positive predictive value than negative predictive value in the evaluation of adjacent organ invasion. The staging work-ups should be individualized by the disease extent of each patient, and then the efficiency of work-ups may be increased without compromising the appropriate FIGO staging and treatment

  6. Comparison of working efficiency of terrestrial laser scanner in day and night conditions

    Science.gov (United States)

    Arslan, A. E.; Kalkan, K.

    2013-10-01

    Terrestrial Laser Scanning is a popular and widely used technique to scan existing objects, document historical sites and items, and remodel them if and when needed. Their ability to collect thousands of point data per second makes them an invaluable tool in many areas from engineering to historical reconstruction. There are many scanners in the market with different technical specifications. One main technical specification of laser scanners is range and illumination. In this study, it is tested to be determined the optimal working times of a laser scanner and the scanners consistency with its specifications sheet. In order to conduct this work, series of GNSS measurements in Istanbul Technical University have been carried out, connected to the national reference network, to determine precise positions of target points and the scanner, which makes possible to define a precise distance between the scanner and targets. Those ground surveys has been used for calibration and registration purposes. Two different scan campaigns conducted at 12 am and 11 pm to compare working efficiency of laser scanner in different illumination conditions and targets are measured with a handheld spectro-radiometer in order to determine their reflective characteristics. The obtained results are compared and their accuracies have been analysed.

  7. In Pursuit of Energy Efficiency in India's Agriculture: Fighting 'Free Power' or Working with it?

    International Nuclear Information System (INIS)

    Swain, Ashwini; Charnoz, Olivier

    2012-08-01

    While about 70% of Indian electricity is carbon-based, a quarter of the nation's consumption goes into agriculture, to extract groundwater for irrigation. Improving the energy efficiency of Indian agriculture is thus a critical issue for the world at large, from both a climate change and energy security perspective. Yet, the picture is made immensely complex given the entrenched policy of providing 'free power' to farmers since the Green Revolution of the 1970's. Over the past two decades, a neo-liberal discourse shared by many Indian and international technocrats has emerged that frames 'free power' as a unilateral problem that leads to economic inefficiencies affecting utilities, the state governments but also the farmers themselves through the unfair allocation of subsidies. The solution that is hence most advocated is to revise and increase tariffs and to improve the technical efficiency of India's 23 million pumps. Key international donors have promoted this line of thinking, making higher tariffs and universal metering a precondition for financing power-sector reforms. Through qualitative data gathered in interviews and fieldwork in four Indian states (Andhra Pradesh, Maharashtra, Gujarat and West Bengal), this work challenges this perspective. It contends that the raising of electricity prices would deeply and unavoidably aggravate rural poverty as well as endanger food security. Whether one likes it or not, moreover, electricity subsidies have become a cornerstone of rural politics in India, as the Congress Party hegemony was challenged by regional parties with strong support among the peasantry. Both pragmatism and effectiveness now call for looking at 'free power' as a constraint to work with, rather than a problem to work against. At the same time, concentrating solely on technically improving the efficiency of pumps might further aggravate the speed at which water tables are depleted. There is thus a need to first optimise water demand in agriculture

  8. Human reliability and plant operating efficiency: Are 12-hour work schedules cause for concern?

    International Nuclear Information System (INIS)

    Baker, T.L.

    1992-01-01

    Since the introduction of 12-h shifts to the US nuclear power industry only 8 yr ago, compressed workweek schedules have proliferated among operations departments at a phenomenal rate. Many plants that continue to use 8-h shifts during normal operations routinely change to scheduled 12-h shifts during refueling or maintenance outages. The most critical issue in the use of extended work shifts is whether alertness, physical stamina, or mental performance are compromised to the point of reducing safety or efficiency of nuclear power plant operation. Laboratory and field research sponsored by the National Institute of Occupational Safety and Health suggests that alertness, measured by self-ratings, and mental performance, measured by computer-based performance tests, are impaired on 12-h shifts compared with 8-h shifts. In contrast to these findings, plant operating efficiency and operator performance have been rated as improved in two field studies conducted in operating nuclear power plants (Fast Flux Test Facility, Washington and Ontario Hydro, Canada). A recent Electric Power Research Institute review of nuclear industry experience with 12-h shifts also suggests an overwhelmingly positive rating of 12-h schedules from both control room operators and management

  9. The effects of working memory training on functional brain network efficiency.

    Science.gov (United States)

    Langer, Nicolas; von Bastian, Claudia C; Wirz, Helen; Oberauer, Klaus; Jäncke, Lutz

    2013-10-01

    The human brain is a highly interconnected network. Recent studies have shown that the functional and anatomical features of this network are organized in an efficient small-world manner that confers high efficiency of information processing at relatively low connection cost. However, it has been unclear how the architecture of functional brain networks is related to performance in working memory (WM) tasks and if these networks can be modified by WM training. Therefore, we conducted a double-blind training study enrolling 66 young adults. Half of the subjects practiced three WM tasks and were compared to an active control group practicing three tasks with low WM demand. High-density resting-state electroencephalography (EEG) was recorded before and after training to analyze graph-theoretical functional network characteristics at an intracortical level. WM performance was uniquely correlated with power in the theta frequency, and theta power was increased by WM training. Moreover, the better a person's WM performance, the more their network exhibited small-world topology. WM training shifted network characteristics in the direction of high performers, showing increased small-worldness within a distributed fronto-parietal network. Taken together, this is the first longitudinal study that provides evidence for the plasticity of the functional brain network underlying WM. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Work efficiency improvement of >90% after implementation of an annual inpatient blood products administration consent form.

    Science.gov (United States)

    Lindsay, Holly; Bhar, Saleh; Bonifant, Challice; Sartain, Sarah; Whittle, Sarah B; Lee-Kim, Youngna; Shah, Mona D

    2018-01-01

    Paediatric haematology, oncology and bone marrow transplant (BMT) patients frequently require transfusion of blood products. Our institution required a new transfusion consent be obtained every admission. The objectives of this project were to: revise inpatient blood products consent form to be valid for 1 year, decrease provider time spent consenting from 15 to improve provider frustration with the consent process. Over 6 months, we determined the average number of hospitalisations requiring transfusions in a random sampling of haematology/oncology/BMT inpatients. We surveyed nurses and providers regarding frustration levels and contact required regarding consents. Four and 12 months after implementation of the annual consent, providers and nurses were resurveyed, and new inpatient cohorts were assessed. Comparison of preintervention and postintervention time data allowed calculation of provider time reduction, a surrogate measure of improved work efficiency. Prior to the annual consent, >33 hours were spent over 6 months obtaining consent on 40 patients, with >19 hours spent obtaining consent when no transfusions were administered during admission. Twelve months after annual consent implementation, 97.5% (39/40) of analysed patients had a completed annual blood products transfusion consent and provider work efficiency had improved by 94.6% (>30 hours). Although several surveyed variables improved following annual consent implementation, provider frustration with consent process remained 6 out of a max score of 10, the same level as prior to the intervention. Development of an annual inpatient blood products consent form decreased provider time from 15 to 90%.

  11. Modelling efficient innovative work: integration of economic and social psychological approaches

    Directory of Open Access Journals (Sweden)

    Babanova Yulia

    2017-01-01

    Full Text Available The article deals with the relevance of integration of economic and social psychological approaches to the solution of enhancing the efficiency of innovation management. The content, features and specifics of the modelling methods within each of approaches are unfolded and options of integration are considered. The economic approach lies in the generation of the integrated matrix concept of management of innovative development of an enterprise in line with the stages of innovative work and the use of the integrated vector method for the evaluation of the innovative enterprise development level. The social psychological approach lies in the development of a system of psychodiagnostic indexes of activity resources within the scope of psychological innovative audit of enterprise management and development of modelling methods for the balance of activity trends. Modelling the activity resources is based on the system of equations accounting for the interaction type of psychodiagnostic indexes. Integration of two approaches includes a methodological level, a level of empirical studies and modelling methods. There are suggested options of integrating the economic and psychological approaches to analyze available material and non-material resources of the enterprises’ innovative work and to forecast an optimal option of development based on the implemented modelling methods.

  12. Schools of young efficiency experts and inventors in the gas industry and associations (organization and work experience)

    Energy Technology Data Exchange (ETDEWEB)

    Shubin, Ya V

    1981-01-01

    The data of accounting materials of the sector associations are used to analyze the basic work indicators of schools of young efficiency experts and inventors which is one of the basic forms for involving young workers and specialists in active efficiency expert and inventor creativity.

  13. Work function and quantum efficiency study of metal oxide thin films on Ag(100)

    Science.gov (United States)

    Chang, V.; Noakes, T. C. Q.; Harrison, N. M.

    2018-04-01

    Increasing the quantum efficiency (QE) of metal photocathodes is in the design and development of photocathodes for free-electron laser applications. The growth of metal oxide thin films on certain metal surfaces has previously been shown to reduce the work function (WF). Using a photoemission model B. Camino et al. [Comput. Mater. Sci. 122, 331 (2016), 10.1016/j.commatsci.2016.05.025] based on the three-step model combined with density functional theory calculations we predict that the growth of a finite number of MgO(100) or BaO(100) layers on the Ag(100) surface increases significantly the QE compared with the clean Ag(100) surface for a photon energy of 4.7 eV. Different mechanisms for affecting the QE are identified for the different metal oxide thin films. The addition of MgO(100) increases the QE due to the reduction of the WF and the direct excitation of electrons from the Ag surface to the MgO conduction band. For BaO(100) thin films, an additional mechanism is in operation as the oxide film also photoemits at this energy. We also note that a significant increase in the QE for photons with an energy of a few eV above the WF is achieved due to an increase in the inelastic mean-free path of the electrons.

  14. Efficiency of Working Capital Management in the System of Financial Safety of Trade Enterprises

    Directory of Open Access Journals (Sweden)

    Krutova Anzhelika S.

    2016-08-01

    Full Text Available The article investigates theoretical and methodological and practical aspects of managing the financial security of enterprises of wholesale and retail trade in Ukraine, summarizes the scientific approaches to assessing enterprise financial security. There justified the influence of the level of efficiency of working capital management on improving the indicators of profitability of financial and economic activity, business activity; increasing financial sustainability and stability of development; ensuring an acceptable level of financial safety of trade enterprises. The main results of financial and economic activities of Ukrainian trade enterprises for the period 2010-2015 that influenced the level of their financial security are analyzed, the negative trends in the dynamics of receiving net profit, low profitability of sales and unprofitableness of using the current assets are highlighted. There revealed a significant disproportion in the structure of capital formation sources, high deficit of own financial resources, trend of financing the current assets entirely from borrowed funds, rapid growth of the level of credit interest rates. There performed an estimation of indicators of financial sustainability by means of the coefficient and aggregate approaches, which indicated the unstable and crisis financial condition of the majority of enterprises of wholesale and retail trade in Ukraine. There determined reserves of increasing financial security with the identification of the key components in the subsystems of financial security, criteria and indicators for an objective assessment of the financial status, taking into account the influence of the external environment, which will allow making sound management decisions regarding the analysis, prevention and neutralization of real and potential threats to trade enterprises.

  15. Is less really more: Does a prefrontal efficiency genotype actually confer better performance when working memory becomes difficult?

    Science.gov (United States)

    Ihne, Jessica L; Gallagher, Natalie M; Sullivan, Marie; Callicott, Joseph H; Green, Adam E

    2016-01-01

    Perhaps the most widely studied effect to emerge from the combination of neuroimaging and human genetics is the association of the COMT-Val(108/158)Met polymorphism with prefrontal activity during working memory. COMT-Val is a putative risk factor in schizophrenia, which is characterized by disordered prefrontal function. Work in healthy populations has sought to characterize mechanisms by which the valine (Val) allele may lead to disadvantaged prefrontal cognition. Lower activity in methionine (Met) carriers has been interpreted as advantageous neural efficiency. Notably, however, studies reporting COMT effects on neural efficiency have generally not reported working memory performance effects. Those studies have employed relatively low/easy working memory loads. Higher loads are known to elicit individual differences in working memory performance that are not visible at lower loads. If COMT-Met confers greater neural efficiency when working memory is easy, a reasonable prediction is that Met carriers will be better able to cope with increasing demand for neural resources when working memory becomes difficult. To our knowledge, this prediction has thus far gone untested. Here, we tested performance on three working memory tasks. Performance on each task was measured at multiple levels of load/difficulty, including loads more demanding than those used in prior studies. We found no genotype-by-load interactions or main effects of COMT genotype on accuracy or reaction time. Indeed, even testing for performance differences at each load of each task failed to find a single significant effect of COMT genotype. Thus, even if COMT genotype has the effects on prefrontal efficiency that prior work has suggested, such effects may not directly impact high-load working memory ability. The present findings accord with previous evidence that behavioral effects of COMT are small or nonexistent and, more broadly, with a growing consensus that substantial effects on phenotype will

  16. Impact of Communication Errors in Radiology on Patient Care, Customer Satisfaction, and Work-Flow Efficiency.

    Science.gov (United States)

    Siewert, Bettina; Brook, Olga R; Hochman, Mary; Eisenberg, Ronald L

    2016-03-01

    The purpose of this study is to analyze the impact of communication errors on patient care, customer satisfaction, and work-flow efficiency and to identify opportunities for quality improvement. We performed a search of our quality assurance database for communication errors submitted from August 1, 2004, through December 31, 2014. Cases were analyzed regarding the step in the imaging process at which the error occurred (i.e., ordering, scheduling, performance of examination, study interpretation, or result communication). The impact on patient care was graded on a 5-point scale from none (0) to catastrophic (4). The severity of impact between errors in result communication and those that occurred at all other steps was compared. Error evaluation was performed independently by two board-certified radiologists. Statistical analysis was performed using the chi-square test and kappa statistics. Three hundred eighty of 422 cases were included in the study. One hundred ninety-nine of the 380 communication errors (52.4%) occurred at steps other than result communication, including ordering (13.9%; n = 53), scheduling (4.7%; n = 18), performance of examination (30.0%; n = 114), and study interpretation (3.7%; n = 14). Result communication was the single most common step, accounting for 47.6% (181/380) of errors. There was no statistically significant difference in impact severity between errors that occurred during result communication and those that occurred at other times (p = 0.29). In 37.9% of cases (144/380), there was an impact on patient care, including 21 minor impacts (5.5%; result communication, n = 13; all other steps, n = 8), 34 moderate impacts (8.9%; result communication, n = 12; all other steps, n = 22), and 89 major impacts (23.4%; result communication, n = 45; all other steps, n = 44). In 62.1% (236/380) of cases, no impact was noted, but 52.6% (200/380) of cases had the potential for an impact. Among 380 communication errors in a radiology department, 37

  17. World energy outlook. Energy efficiency policies in the World: what works and what does not

    International Nuclear Information System (INIS)

    2013-01-01

    Long considered simply as an 'option' in the OECD countries, energy efficiency is spreading, with notable progress in all major regions of the world. The experience gained by the OECD countries benefits so-called emerging countries, as demonstrated by the study of energy efficiency in the world conducted by ADEME for the World Energy Council. A relative international consensus is emerging. It sees energy efficiency as a beneficial strategy for each stakeholder: reducing dependence on energy imports, reducing emissions of greenhouse gas emissions related to energy, preserving the competitiveness of companies and household purchasing power, etc. This good news appears to be an illusion, however, with a general decrease in energy efficiency over the recent years. Regional disparities remain and new solutions must be found to take the reality of each country into account and thus move to the next level

  18. Combating Climate Change with Energy Efficiency - How to Make It Work

    International Nuclear Information System (INIS)

    Bukarica, V.

    2016-01-01

    COP21 agreement raised the awareness of the widest international community on an urgent need to act and deliver results that would mitigate adverse consequences of climate change. Energy efficiency is once again declared as the most readily available, rapid and cost-effective way to achieve desired greenhouse gases reductions. However, although significant efforts are made worldwide to put sound energy efficiency policies in place, the desired results in terms of saved kWh, and consequently in terms of reduced tonnes of CO2 emitted, are missing. The paper investigates and explains the reasons behind this energy efficiency policy failure, known as energy efficiency gap, by using examples from current energy efficiency and other policies in Croatia. The first reason is in the lack of understanding of energy efficiency market, the analysis of which needs to be a starting point in policy making. Selection of policy instruments needs to be based on feedback from those that are actually intended to implement them, i.e. participatory approach needs to be mainstreamed in policy making as it will reveal the reality of the implementing environment (existing attitudes, experienced brakes and desired levers). Secondly, there is generally insufficient knowledge about policy instruments impacts (both potential and achieved). Evaluation of expected impacts of a certain policy instrument needs to be realistic taking into account time needed for target group to fully adopt the instrument and utilise it to the highest level envisaged by the policy. And the last, reason for energy efficiency policy failure is to be found in continuously neglecting benefits of improved energy efficiency beyond energy savings. Energy efficiency requires genuine not declarative commitment that will integrate it in all other policy spheres. It is essential to start treating energy efficiency not as an end (i.e. as a policy for itself), but as a means to achieve multiple social, economic and environmental

  19. The increasing efficiency of financial resources management at implementation of goods’ purchase, works, services for the state and municipal needs

    Directory of Open Access Journals (Sweden)

    Proskurnja Dar'ja Vladimirovna

    2016-02-01

    Full Text Available The article is devoted to the review of the existing problems in the field of financial resources management at implementation of goods’ purchase, works, services for the state and municipal needs. Determination of the limit prices of purchases is revealed as the most important problem of the increasing efficiency of financial resources management at implementation of goods’ purchase, works, services for the state and municipal needs. The range of problems of determination of the limit prices of purchases is systematized.

  20. Searching while loaded: Visual working memory does not interfere with hybrid search efficiency but hybrid search uses working memory capacity.

    Science.gov (United States)

    Drew, Trafton; Boettcher, Sage E P; Wolfe, Jeremy M

    2016-02-01

    In "hybrid search" tasks, such as finding items on a grocery list, one must search the scene for targets while also searching the list in memory. How is the representation of a visual item compared with the representations of items in the memory set? Predominant theories would propose a role for visual working memory (VWM) either as the site of the comparison or as a conduit between visual and memory systems. In seven experiments, we loaded VWM in different ways and found little or no effect on hybrid search performance. However, the presence of a hybrid search task did reduce the measured capacity of VWM by a constant amount regardless of the size of the memory or visual sets. These data are broadly consistent with an account in which VWM must dedicate a fixed amount of its capacity to passing visual representations to long-term memory for comparison to the items in the memory set. The data cast doubt on models in which the search template resides in VWM or where memory set item representations are moved from LTM through VWM to earlier areas for comparison to visual items.

  1. Effect of the number of two-wheeled containers at a gathering point on energetic workload and work efficiency

    NARCIS (Netherlands)

    Kuijer, P. Paul F M; Frings-Dresen, Monique H W; Van Der Beek, Allard J.; Van Dieën, Jaap H.; Visser, Bart

    2000-01-01

    The effect of the number of two-wheeled containers at a gathering point on the energetic workload and the work efficiency in refuse collecting was studied. The results showed that the size of the gathering point had no effect on the energetic workload. However, the size of the gathering point had an

  2. The influence of incline and speed on work rate, gross efficiency and kinematics of roller ski skating.

    Science.gov (United States)

    Sandbakk, Øyvind; Ettema, Gertjan; Holmberg, Hans-Christer

    2012-08-01

    During competitions, elite cross-country skiers produce higher external work rates on uphill than on flat terrain. However, it is not presently known whether this reflects solely higher energy expenditure. Furthermore, the kinematic factors associated with these higher rates of uphill work have not yet been examined. Therefore, in the present investigation the work rate and associated kinematic parameters at similar metabolic rates during roller ski skating on flat and uphill terrains have been compared. Seven elite male skiers performed six 5-min sub-maximal exercise bouts at the same low, moderate and high metabolic rates on 2 and 8% inclines, while roller skiing on a treadmill employing the G3 skating technique. The work rate was calculated as work against gravity and friction, whereas the energetic equivalent of VO(2) was taken as the metabolic rate. Gross efficiency was defined as work rate divided by metabolic rate. Kinematic parameters were analyzed in three dimensions. At the same metabolic rate, the work rate, cycle rate, work per cycle and relative duration of propulsive phases during a cycle of movement were all higher on the 8% than on the 2% incline at all speeds (all P < 0.05). At similar work rates, gross efficiency was greater on the 8% incline (P < 0.05). In conclusion, these elite skiers consistently demonstrated higher work rates on the 8% incline. To achieve the higher work rates on the steeper incline, these elite skiers employed higher cycle rates and performed more work per cycle, in association with a longer relative propulsive phase.

  3. Dithiocarbamate Self-Assembled Monolayers as Efficient Surface Modifiers for Low Work Function Noble Metals

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Dominik; Schäfer, Tobias; Schulz, Philip; Jung, Sebastian; Rittich, Julia; Mokros, Daniel; Segger, Ingolf; Maercks, Franziska; Effertz, Christian; Mazzarello, Riccardo; Wuttig, Matthias

    2016-09-06

    Tuning the work function of the electrode is one of the crucial steps to improve charge extraction in organic electronic devices. Here, we show that N,N-dialkyl dithiocarbamates (DTC) can be effectively employed to produce low work function noble metal electrodes. Work functions between 3.1 and 3.5 eV are observed for all metals investigated (Cu, Ag, and Au). Ultraviolet photoemission spectroscopy (UPS) reveals a maximum decrease in work function by 2.1 eV as compared to the bare metal surface. Electronic structure calculations elucidate how the complex interplay between intrinsic dipoles and dipoles induced by bond formation generates such large work function shifts. Subsequently, we quantify the improvement in contact resistance of organic thin film transistor devices with DTC coated source and drain electrodes. These findings demonstrate that DTC molecules can be employed as universal surface modifiers to produce stable electrodes for electron injection in high performance hybrid organic optoelectronics.

  4. The role of motivation to work for the increase of efficiency

    OpenAIRE

    Tukhtabaev, J.

    2017-01-01

    In this article, the essence of concepts of workers and their attitude to labour, the motivation of the labour, promoting and influencing on motivations of the mechanism in the enterprises on the market–economic attitudes are theoretically investigated. Also, scientific conclusions and offers of the result of practical research carried out on the improvement of attitudes of labour and motivation of labour for an increase of efficiency of labour are revealed.

  5. Walking the Torque: Proposed Work Plan for Energy-Efficiency Policy Opportunities for Electric Motor-Driven Systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Electric motor-driven system is the largest single energy end use accounting for more than 40% of global electricity consumption. This paper sets out an ambitious but achievable target with the global work plan to improve the energy efficiency of electric motor-driven system by 10% to 15% based on the finding of working paper ''Energy-Efficiency Policy Opportunities for Electric Motor-Driven Systems (Waide et al., 2011)''. If governments commit to the proposed work plan immediately and maintain resourcing levels, this could be achieved by 2030 and it would be equivalent to reducing total global electricity use by around 5%. The proposed work plan of this paper is to align regulatory settings within a globally applicable scheme. The IEA believes this target can only be achieved through global co-operation leading to aligned national policy settings that countries can unlock the economies of scale that will result from using more energy efficient EMDS.

  6. [Influence of different lighting levels at workstations with video display terminals on operators' work efficiency].

    Science.gov (United States)

    Janosik, Elzbieta; Grzesik, Jan

    2003-01-01

    The aim of this work was to evaluate the influence of different lighting levels at workstations with video display terminals (VDTs) on the course of the operators' visual work, and to determine the optimal levels of lighting at VDT workstations. For two kinds of job (entry of figures from a typescript and edition of the text displayed on the screen), the work capacity, the degree of the visual strain and the operators' subjective symptoms were determined for four lighting levels (200, 300, 500 and 750 lx). It was found that the work at VDT workstations may overload the visual system and cause eyes complaints as well as the reduction of accommodation or convergence strength. It was also noted that the edition of the text displayed on the screen is more burdening for operators than the entry of figures from a typescript. Moreover, the examination results showed that the lighting at VDT workstations should be higher than 200 lx and that 300 lx makes the work conditions most comfortable during the entry of figures from a typescript, and 500 lx during the edition of the text displayed on the screen.

  7. Active workstation allows office workers to work efficiently while sitting and exercising moderately.

    Science.gov (United States)

    Koren, Katja; Pišot, Rado; Šimunič, Boštjan

    2016-05-01

    To determine the effects of a moderate-intensity active workstation on time and error during simulated office work. The aim of the study was to analyse simultaneous work and exercise for non-sedentary office workers. We monitored oxygen uptake, heart rate, sweating stains area, self-perceived effort, typing test time with typing error count and cognitive performance during 30 min of exercise with no cycling or cycling at 40 and 80 W. Compared baseline, we found increased physiological responses at 40 and 80 W, which corresponds to moderate physical activity (PA). Typing time significantly increased by 7.3% (p = 0.002) in C40W and also by 8.9% (p = 0.011) in C80W. Typing error count and cognitive performance were unchanged. Although moderate intensity exercise performed on cycling workstation during simulated office tasks increases working task execution time with, it has moderate effect size; however, it does not increase the error rate. Participants confirmed that such a working design is suitable for achieving the minimum standards for daily PA during work hours. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  8. Depression of efficiency of neutrophils for Candida albicans phagocytosis in personnel working in radiation field

    International Nuclear Information System (INIS)

    Hassan, A.A.

    2000-01-01

    The neutrophil functions, chemotaxis (direct and random migration), phagocytosis using Candida albicans (percent, index), phagocytosis by NBT (percent, score) and adherence were studied on 55 persons working in radiation field (group I) and 40 persons as control (group II). The effect of radiation on blood picture of persons working in this field with special references to leucocytic counts and neutrophil functions was studied. White and red cells counts were 6.275 +- 1.723 and 5.475 +- 1.039 (group I) and 6.440 +- 1.556, 4.704 +- 0.734 for group II, respectively with no significant difference, while in neutrophil function there was a statistically significant difference in all functions between two groups (P < 0.01). This indicates the importance of neutrophil functions in following up persons working in radiation field

  9. Experimental procedure for the determination of counting efficiency and sampling flow rate of a grab-sampling working level meter

    International Nuclear Information System (INIS)

    Grenier, M.; Bigu, J.

    1982-07-01

    The calibration procedures used for a working level meter (WLM) of the grab-sampling type are presented in detail. The WLM tested is a Pylon WL-1000C working level meter and it was calibrated for radon/thoron daughter counting efficiency (E), for sampling pump flow rate (Q) and other variables of interest. For the instrument calibrated at the Elliot Lake Laboratory, E was 0.22 +- 0.01 while Q was 4.50 +- 0.01 L/min

  10. Efficiency of the Prefrontal Cortex during Working Memory in Attention-Deficit/Hyperactivity Disorder

    Science.gov (United States)

    Sheridan, Margaret A.; Hinshaw, Stephen; D'Esposito, Mark

    2007-01-01

    Objective: Previous research has demonstrated that during task conditions requiring an increase in inhibitory function or working memory, children and adults with attention-deficit/hyperactivity disorder (ADHD) exhibit greater and more varied prefrontal cortical(PFC) activation compared to age-matched control participants. This pattern may reflect…

  11. Physical Education as a means of health and working efficiency improvement of population

    Directory of Open Access Journals (Sweden)

    Khasanova Rezeda R.

    2016-01-01

    Full Text Available In this article historical and contemporary influence of physical education (PE and sport instances are shown in economic indices. The notion “health”, as well as the influence of physical education and sport at its level, is given. Health-detrimental behavior (malnutrition, physical inactivity, alcohol abuse and smoking can be the cause of chronic diseases and have a significant influence on health of citizens. Experimental data, which approve that bad working conditions and health-detrimental behavior can discourage productivity and extend the periods of temporary incapacity for work, are marked. In addition, there is an access to the majority of the adult population, which provides a perfect opportunity for healthy lifestyle campaign. Consequently, the campaigns aimed at health improvement of the employable population at their working places, have potentials for a wide population segment engagement, which cannot be accessible for other medical campaigns. Experimental data on increase in labour productivity and economic effectiveness improvement by means of physical education are given; the latter was applied to people at their work during the soviet period, when the large-scale research was made. The necessity of physical education integration in the productive process is proved, which will finally have a positive impact on the whole economy.

  12. Low Working Memory Capacity Impedes both Efficiency and Learning of Number Transcoding in Children

    Science.gov (United States)

    Camos, Valerie

    2008-01-01

    This study aimed to evaluate the impact of individual differences in working memory capacity on number transcoding. A recently proposed model, ADAPT (a developmental asemantic procedural transcoding model), accounts for the development of number transcoding from verbal form to Arabic form by two mechanisms: the learning of new production rules…

  13. Worked examples are more efficient for learning than high-assistance instructional software

    NARCIS (Netherlands)

    McLaren, Bruce M.; van Gog, Tamara; Ganoe, Craig; Yaron, David; Karabinos, Michael

    2015-01-01

    The ‘assistance dilemma’, an important issue in the Learning Sciences, is concerned with how much guidance or assistance should be provided to help students learn. A recent study comparing three high-assistance approaches (worked examples, tutored problems, and erroneous examples) and one

  14. Energy-efficiency increase of reinforced concrete columns with recessed working fittings

    Science.gov (United States)

    Muradyan, Viktor; Mailyan, Dmitry; Lyapin, Alexander; Chubarov, Valery

    2017-10-01

    One of the most important ways of increasing the energy-efficiency of the construction industry is the reduction of the material capacity of structures and labour intensity of their manufacturing. Since manufacturing of reinforced concrete structures requires considerable financial and energy expenses, then reduction of technological cycle operations is sure to be the urgent task today. It is well known, that in the recessed reinforced concrete elements the transverse reinforcement is fixed for the purpose of ensuring the longitudinal rods fixity. Besides, the thickness of the protective layer, as a rule, is taken the minimum. The authors proposed to increase the protective layer, and that will reduce the amount of transverse reinforcement rods significantly and will make the technological process of structures manufacturing easier.

  15. The Effects of Two Types of Sleep Deprivation on Visual Working Memory Capacity and Filtering Efficiency

    OpenAIRE

    Drummond, Sean P. A.; Anderson, Dane E.; Straus, Laura D.; Vogel, Edward K.; Perez, Veronica B.

    2012-01-01

    Sleep deprivation has adverse consequences for a variety of cognitive functions. The exact effects of sleep deprivation, though, are dependent upon the cognitive process examined. Within working memory, for example, some component processes are more vulnerable to sleep deprivation than others. Additionally, the differential impacts on cognition of different types of sleep deprivation have not been well studied. The aim of this study was to examine the effects of one night of total sleep depri...

  16. Authorities work on energy efficiency - Compilation and Analysis 2012; Myndigheters arbete med energieffektivisering - Sammanstaellning och analys 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    Since the year 2010, the Energy Authority has the responsibility for the administration and coordination of work with Regulation (2009:893) on energy efficiency measures for government agencies. Under the regulation, the authorities choose to work with at least two of six actions. The authorities concerned by the Regulation shall annually report its energy use to the Energy Authority. Reporting must also show the results of the measures they have chosen to work with. This report shows the results of the authorities' reporting in February 2012, which covers the 2011 energy use. In addition, a deep analysis is made of 20 agencies to compare the results of their energy use 2010 and 2011. This has been to highlight if state governments can be seen as a pioneer in energy efficiency and if the authorities comply with the requirements of the Regulation. The results of the report show that the government's total energy consumption in 2011 amounts to 2 TWh. Many authorities have a functioning environmental management that energy work is a part of. The authorities also states that reporting contains flaws but that follow-up procedures evolve and improve. Shortcomings are due in part to data from many landlords based on certain assumptions.

  17. Efficiency of remediation of technogenic barrens around the Pechenganikel works in the Kola Subarctic

    Science.gov (United States)

    Koptsik, G. N.; Koptsik, S. V.; Smirnova, I. E.

    2014-05-01

    Remediation of the technogenic barrens around the Pechenganikel works on the Kola Peninsula resulted in the improvement of the soil properties, namely, in a decrease in acidity and enrichment with nutrients, which continued for several years. However, the reaction of most of the treated soils remained strongly acid, and the concentrations of available calcium, magnesium, potassium, and phosphorus were much lower than their background levels and the demands of the plants for nutrients (especially, for magnesium and potassium). The soils were depleted in available manganese and zinc. Most of the treated soils contained the same (or higher) amounts of available nickel and copper compounds in comparison with their untreated analogues. The willow plantations on the remediated plots were in a satisfactory state, but they experienced a deficit of magnesium, manganese, and zinc; they consumed elevated amounts of nickel and copper. Recommendations on the nutrient regime of the soils aimed at decreasing the mobility and biological availability of heavy metals were made.

  18. Variability in visual working memory ability limits the efficiency of perceptual decision making.

    Science.gov (United States)

    Ester, Edward F; Ho, Tiffany C; Brown, Scott D; Serences, John T

    2014-04-02

    The ability to make rapid and accurate decisions based on limited sensory information is a critical component of visual cognition. Available evidence suggests that simple perceptual discriminations are based on the accumulation and integration of sensory evidence over time. However, the memory system(s) mediating this accumulation are unclear. One candidate system is working memory (WM), which enables the temporary maintenance of information in a readily accessible state. Here, we show that individual variability in WM capacity is strongly correlated with the speed of evidence accumulation in speeded two-alternative forced choice tasks. This relationship generalized across different decision-making tasks, and could not be easily explained by variability in general arousal or vigilance. Moreover, we show that performing a difficult discrimination task while maintaining a concurrent memory load has a deleterious effect on the latter, suggesting that WM storage and decision making are directly linked.

  19. Optimal production scheduling for energy efficiency improvement in biofuel feedstock preprocessing considering work-in-process particle separation

    International Nuclear Information System (INIS)

    Li, Lin; Sun, Zeyi; Yao, Xufeng; Wang, Donghai

    2016-01-01

    Biofuel is considered a promising alternative to traditional liquid transportation fuels. The large-scale substitution of biofuel can greatly enhance global energy security and mitigate greenhouse gas emissions. One major concern of the broad adoption of biofuel is the intensive energy consumption in biofuel manufacturing. This paper focuses on the energy efficiency improvement of biofuel feedstock preprocessing, a major process of cellulosic biofuel manufacturing. An improved scheme of the feedstock preprocessing considering work-in-process particle separation is introduced to reduce energy waste and improve energy efficiency. A scheduling model based on the improved scheme is also developed to identify an optimal production schedule that can minimize the energy consumption of the feedstock preprocessing under production target constraint. A numerical case study is used to illustrate the effectiveness of the proposed method. The research outcome is expected to improve the energy efficiency and enhance the environmental sustainability of biomass feedstock preprocessing. - Highlights: • A novel method to schedule production in biofuel feedstock preprocessing process. • Systems modeling approach is used. • Capable of optimize preprocessing to reduce energy waste and improve energy efficiency. • A numerical case is used to illustrate the effectiveness of the method. • Energy consumption per unit production can be significantly reduced.

  20. The Evaluation of Efficiency of the Use of Machine Working Time in the Industrial Company - Case Study

    Science.gov (United States)

    Kardas, Edyta; Brožova, Silvie; Pustějovská, Pavlína; Jursová, Simona

    2017-12-01

    In the paper the evaluation of efficiency of the use of machines in the selected production company was presented. The OEE method (Overall Equipment Effectiveness) was used for the analysis. The selected company deals with the production of tapered roller bearings. The analysis of effectiveness was done for 17 automatic grinding lines working in the department of grinding rollers. Low level of efficiency of machines was affected by problems with the availability of machines and devices. The causes of machine downtime on these lines was also analyzed. Three basic causes of downtime were identified: no kanban card, diamonding, no operator. Ways to improve the use of these machines were suggested. The analysis takes into account the actual results from the production process and covers the period of one calendar year.

  1. THE EVALUATION OF EFFICIENCY OF THE USE OF MACHINE WORKING TIME IN THE INDUSTRIAL COMPANY – CASE STUDY

    Directory of Open Access Journals (Sweden)

    Edyta KARDAS

    2017-10-01

    Full Text Available In the paper the evaluation of efficiency of the use of machines in the selected production company was presented. The OEE method (Overall Equipment Effectiveness was used for the analysis. The selected company deals with the produc-tion of tapered roller bearings. The analysis of effectiveness was done for 17 automatic grinding lines working in the department of grinding rollers. Low level of efficiency of machines was affected by problems with the availability of ma-chines and devices. The causes of machine downtime on these lines was also analyzed. Three basic causes of downtime were identified: no kanban card, diamonding, no operator. Ways to improve the use of these machines were suggested. The analysis takes into account the actual results from the production process and covers the period of one calendar year.

  2. Assessing Energy Efficiency of Compression Heat Pumps in Drying Processes when Zeotropic Hydrocarbon Mixtures are Used as Working Agents

    Directory of Open Access Journals (Sweden)

    Shurayts Alexander

    2016-01-01

    Full Text Available Presents the results of studies of innovative materials in the field of renewable energy.The paper proposes a design and a formula for assessing energy efficiency of the heat pump air dryer, which uses zeotropic hydrocarbon mixtures of saturated hydrocarbons as a working agent and applies the principle of a counter-current heat exchanger with a variable temperature of both the working and the drying agents. Energy efficiency of the heat pump is achieved by means of obtaining a greater part of heat from renewable energy sources, in this case by cooling the air and condensing the water vapors in the heat pump. A conducted analysis identified correlations in establishing the marginal real coefficient of performance of the compression heat pump dryer running on zeotropic hydrocarbon mixtures and operating a cycle with variable temperatures of both the working and the drying agent in the evaporator and the condenser of the heat pump. According to the established correlations, the marginal real coefficient of performance of the compression heat pump dryers running on zeotropic hydrocarbon mixtures of 40 mol% of R600a and 60 mol% of R601 is 1.92 times higher than that of the same dryers running on only R600 (n-butane.

  3. Web technology to support work processes in energy policy research - A case study with energy efficiency standards

    International Nuclear Information System (INIS)

    Benenson, Peter; McMahon, James E.; Brown, Stephen R.

    2002-01-01

    This paper focuses on a process to design and build a web-based system to assist staff in day-to-day management and contemporaneous documentation of their work. Other groups that want to use web technology to support their work could apply the approach presented here, but the design itself pertains to a particular set of issues in a unique context. Each user must apply the approach to identify their objectives and design a site to meet them. The main question that the Energy Efficiency Standards Group addressed was: ''How can we facilitate documentation of interim results and final products while conducting a complex, interdependent set of analyses by multiple authors under time pressures for delivering a final product?'' The approach to address this question includes categorization of the components of the work, discussions with staff, development of infrastructure support for documentation, implementation of the documentation process and integration with the workflow, and follow- up with staff. The search for a solution raised a number of issues such as the need for a thorough understanding of the work, consensus building by inclusion of key staff, and deliverable scheduling to allow for contemporaneous documentation. Documentation results vary among the product analyses, from extensive internal and external use to much slower adoption. Complaints include the length of the input forms and pressure from clients to deliver results. But with repeated demand for interim output, the need for thorough contemporaneous documentation still remains. Accordingly, as problems arise there is continued commitment among the staff to address them

  4. Analysis of indicators of an efficiency estimation of work of the employee and the business model of the organization

    Directory of Open Access Journals (Sweden)

    Yury G. Odegov

    2016-01-01

    Full Text Available In conditions of increasing competition, the problems of efficiency increase of activity of the company are significantly actualized, which directly depends on efficiency of labour activity of every employee and the implemented business model of the organization. On this basis the aim of the research is to analyze existing indicators of performance evaluation of the labour activities of both the employee and the business model of the organization.The theoretical basis of the study consists of principles of the economic theory, the works of native and foreign experts in the field of job evaluation. The information base of the research consists of economic and legal literature dealing with problems of this study, the data published in periodicals, materials of Russian scientific conferences, seminars, and Internet resources.In this article I have used and found the application of scientific methods of data collection, methods of research and methods of assessing their credibility: quantitative, comparative, logical analysis and synthesis.The modern business concern about the accumulation of wealth of shareholders, giving the company stability, growth and efficiency inevitably leads to necessity of creation and development of technologies aimed at improving the productivity of employees. The paper presents a comparative analysis of different approaches to assessing the labour effectiveness.The performance of the work is the ratio of the four essential parameters that determine the measure of efficiency of persons’ activity: the quantity and quality of result of work (a service, material product or technology in relation to spend time and cost on its production. The use of employees («performance» should be in the following way that they could achieve the planned results in the workplace. The authors have noted that to develop of technologies for the measurement of productivity it is very important to use the procedures and indicators that are

  5. The Impact of Regulation 561/2006 on Fleet Management Viewed through Efficient Use of Drivers' Working Time

    Directory of Open Access Journals (Sweden)

    Robert Muha

    2009-01-01

    Full Text Available The introduction of contemporary procedures to fleet managementprocesses has recently changed the work planning andsupervision of driver's work activities. Tendencies to control theimplementation of driver's work have been present in modemprofessional practice for quite a long time; however, the equipmentavailable on the market limited its implementation. Theintensified development of digital tachographs has, in technicalterms, ensured such equipment considerably before the legislativegroundwork was prepared for its practical implementation.The Commission Regulation (EC No. 561!2006 (implementationof Social legislation relating to Road Transport does notbring any essential novelties in terms of permitted workload.Consistent monitoring of drivers activities, made possible bydigital tachographs, will have impact on the existing workingmethods. The topic of the present paper is in deep analysis ofthe impact of the mentioned regulation with special emphasison the conditions for the regulation of the current stage of driverswork and on the expected consequences. The essential imp011ancelies on the expected change in the mentality and approachto planning the driver's activities in the transport processon the part of the ea n·ier: the outcome will eventually resultin the efficiency of each individual canier.

  6. Metabolic rate and gross efficiency at high work rates in world class and national level sprint skiers.

    Science.gov (United States)

    Sandbakk, Øyvind; Holmberg, Hans-Christer; Leirdal, Stig; Ettema, Gertjan

    2010-06-01

    The present study investigated metabolic rate (MR) and gross efficiency (GE) at moderate and high work rates, and the relationships to gross kinematics and physical characteristics in elite cross-country skiers. Eight world class (WC) and eight national level (NL) male sprint cross-country skiers performed three 5-min stages using the skating G3 technique, whilst roller skiing on a treadmill. GE was calculated by dividing work rate by MR. Work rate was calculated as the sum of power against gravity and frictional rolling forces. MR was calculated using gas exchange and blood lactate values. Gross kinematics, i.e. cycle length (CL) and cycle rate (CR) were measured by video analysis. Furthermore, the skiers were tested for time to exhaustion (TTE), peak oxygen uptake (VO(2peak)), and maximal speed (V(max)) on the treadmill, and maximal strength in the laboratory. Individual performance level in sprint skating was determined by FIS points. WC skiers did not differ in aerobic MR, but showed lower anaerobic MR and higher GE than NL skiers at a given speed (all P higher V(max) and TTE (all P better technique and to technique-specific power.

  7. High efficiency and flexible working distance digital in-line holographic microscopy based on Fresnel zone plate

    International Nuclear Information System (INIS)

    Tian, Peng; Yang, Fan; Li, Fanxing; Hu, Song; Yan, Wei; Hua, Yilei

    2017-01-01

    Traditional digital in-line holography suffers from twin-image noise problems and extremely short working distances between the object and light source. Here, we propose lensless Fourier transform digital in-line holographic microscopy based on a single optical element. A Fresnel zone plate is used to split the incident light into two parts: one is scattered along the original direction, the other is gathered at a focal point and the sample is put behind the focus. The interference fringe pattern, formed by the two beams, is recorded digitally by a CCD camera. A novel reconstruction algorithm is proposed to present the object image. The proof-of-concept experiments demonstrate that the proposed technique can eliminate the twin-image noise problem, improving the image contrast with high efficiency, and increasing the flexibility of the working distance. Furthermore, a wide field of view and no contact make it a promising tool for the study of materials science, biology and microelectronics. (paper)

  8. Universal Expression of Efficiency at Maximum Power: A Quantum-Mechanical Brayton Engine Working with a Single Particle Confined in a Power-Law Trap

    International Nuclear Information System (INIS)

    Ye Zhuo-Lin; Li Wei-Sheng; Lai Yi-Ming; He Ji-Zhou; Wang Jian-Hui

    2015-01-01

    We propose a quantum-mechanical Brayton engine model that works between two superposed states, employing a single particle confined in an arbitrary power-law trap as the working substance. Applying the superposition principle, we obtain the explicit expressions of the power and efficiency, and find that the efficiency at maximum power is bounded from above by the function: η_+ = θ/(θ + 1), with θ being a potential-dependent exponent. (paper)

  9. Profiles and removal efficiency of polybrominated diphenyl ethers by two different types of sewage treatment work in Hong Kong.

    Science.gov (United States)

    Man, Yu Bon; Chow, Ka Lai; Man, Ming; Lam, James Chung Wah; Lau, Frankie Tat Kwong; Fung, Wing Cheong; Wong, Ming Hung

    2015-02-01

    This study was to investigate removal efficiencies and profiles of 14 polybrominated diphenyl ether (PBDE) congeners by two different types of sewage treatment work (STW) in Hong Kong: Stonecutters Island STW (SCISTW) which uses chemically enhanced primary treatment (CEPT) process and Sha Tin STW (STSTW) which adopts biological treatment. The results indicated that both SCISTW and STSTW had a high total removal efficiency for BDE-47, BDE-99 BDE-209 and total PBDEs (SCISTW: 71.6 ± 15.8, 84.7 ± 12.3, 96.0 ± 2.62 and 87.4 ± 8.02%, respectively; STSTW: 74.8 ± 9.5, 90.7 ± 9.14, 96.2 ± 2.41 and 89.3 ± 2.62%, respectively) and PBDEs were chiefly removed by sorption. However, the profile of PBDEs demonstrated that the relative proportions of BDE-28 and BDE-47 in total PBDEs markedly increased, while that of BDE-209 decreased in the effluent samples of the two sewage treatment works, especially in STSTW. The percentage of BDE-209 in total PBDEs in effluent (49.3%) of SCISTW was 21.2% lower than that in influent (70.5%), and the percentage of BDE-209 in total PBDEs in effluent (13.8%) of STSTW was 34.1% reduced from influent (47.9%). Despite overall removal, the percentage of BDE-47 in total PBDEs in effluent (17.6%) of SCISTW was 6.85% higher than that in influent (10.7%), and the percentage of BDE-47 in total PBDEs in effluent (33.5%) of STSTW was 18.1% increased from influent (16.8%). The increase in proportion of BDE-47 in the effluent might raise environmental and public health concerns. Our study is a first attempt in reporting the PBDE congener profiles in different phases of sewage treatment. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Control of indium tin oxide anode work function modified using Langmuir-Blodgett monolayer for high-efficiency organic photovoltaics

    Directory of Open Access Journals (Sweden)

    Yuya Yokokura

    2017-08-01

    Full Text Available The use of Langmuir-Blodgett (LB monolayers to modify the indium tin oxide (ITO work function and thus improve the performance of zinc phthalocyanine (ZnPc/fullerene (C60-based and boron subphthalocyanine chloride (SubPc/C60-based small molecule organic photovoltaic devices (OPVs was examined. In general, LB precursor compounds contain one or more long alkyl chain substituents that can act as spacers to prevent electrical contact with adjoining electrode surfaces. As one example of such a compound, arachidic acid (CH3(CH218COOH was inserted in the forms of one-layer, three-layer or five-layer LB films between the anode ITO layer and the p-type layer in ZnPc-C60-based OPVs to investigate the effects of the long alkyl chain group when it acts as an electrically insulating spacer. The short-circuit current density (Jsc values of the OPVs with the three- and five-layer inserts (1.78 mA·cm−2 and 0.61 mA·cm−2, respectively were reduced dramatically, whereas the Jsc value for the OPV with the single-layer insertion (2.88 mA·cm−2 was comparable to that of the OPV without any insert (3.14 mA·cm-2. The ITO work function was shifted positively by LB deposition of a surfactant compound, C9F19C2H4-O-C2H4-COOH (PFECA, which contained a fluorinated head group. This positive effect was maintained even after formation of an upper p-type organic layer. The Jsc and open-circuit voltage (Voc of the SubPc-C60-based OPV with the LB-modified ITO layers were effectively enhanced. As a result, a 42% increase in device efficiency was achieved.

  11. Only "efficient" emotional stimuli affect the content of working memory during free-recollection from natural scenes.

    Science.gov (United States)

    Buttafuoco, Arianna; Pedale, Tiziana; Buchanan, Tony W; Santangelo, Valerio

    2018-02-01

    Emotional events are thought to have privileged access to attention and memory, consuming resources needed to encode competing emotionally neutral stimuli. However, it is not clear whether this detrimental effect is automatic or depends on the successful maintenance of the specific emotional object within working memory. Here, participants viewed everyday scenes including an emotional object among other neutral objects followed by a free-recollection task. Results showed that emotional objects-irrespective of their perceptual saliency-were recollected more often than neutral objects. The probability of being recollected increased as a function of the arousal of the emotional objects, specifically for negative objects. Successful recollection of emotional objects (positive or negative) from a scene reduced the overall number of recollected neutral objects from the same scene. This indicates that only emotional stimuli that are efficient in grabbing (and then consuming) available attentional resources play a crucial role during the encoding of competing information, with a subsequent bias in the recollection of neutral representations.

  12. Efficient preloading of the ventricles by a properly timed atrial contraction underlies stroke work improvement in the acute response to cardiac resynchronization therapy

    Science.gov (United States)

    Hu, Yuxuan; Gurev, Viatcheslav; Constantino, Jason; Trayanova, Natalia

    2013-01-01

    Background The acute response to cardiac resynchronization therapy (CRT) has been shown to be due to three mechanisms: resynchronization of ventricular contraction, efficient preloading of the ventricles by a properly timed atrial contraction, and mitral regurgitation reduction. However, the contribution of each of the three mechanisms to the acute response of CRT, specifically stroke work improvement, has not been quantified. Objective The goal of this study was to use an MRI-based anatomically accurate 3D model of failing canine ventricular electromechanics to quantify the contribution of each of the three mechanisms to stroke work improvement and identify the predominant mechanisms. Methods An MRI-based electromechanical model of the failing canine ventricles assembled previously by our group was further developed and modified. Three different protocols were used to dissect the contribution of each of the three mechanisms to stroke work improvement. Results Resynchronization of ventricular contraction did not lead to significant stroke work improvement. Efficient preloading of the ventricles by a properly timed atrial contraction was the predominant mechanism underlying stroke work improvement. Stroke work improvement peaked at an intermediate AV delay, as it allowed ventricular filling by atrial contraction to occur at a low diastolic LV pressure but also provided adequate time for ventricular filling before ventricular contraction. Diminution of mitral regurgitation by CRT led to stroke work worsening instead of improvement. Conclusion Efficient preloading of the ventricles by a properly timed atrial contraction is responsible for significant stroke work improvement in the acute CRT response. PMID:23928177

  13. Does the Central Government’s Environmental Policy Work? Evidence from the Provincial-Level Environment Efficiency in China

    Directory of Open Access Journals (Sweden)

    Qiong Xia

    2016-12-01

    Full Text Available This paper aims at checking the effectiveness of environmental policy pushed by the Central Government at provincial level since China’s entry into the World Trade Organization (WTO. For this purpose, the industrial system of each province is divided into industrial production sub-system and pollution treatment sub-system, and a novel slack-based measure data envelopment analysis (SBM-DEA model with non-cooperative game is proposed to evaluate the environment efficiency of both industrial production sub-system and pollutant treatment sub-system. The results show that the proposed model can describe the environmental efficiency more precisely than the traditional DEA models. During 2003–2012, the efficiencies of industrial production sub-system and pollution treatment sub-system at the provincial level are both relatively low. Specifically, the efficiency of industrial production is not only lower than pollution treatment efficiency, but is falling generally, especially in the Eastern area. However, in the Central and Western area, the efficiency of industrial production remains relatively stable, and pollution treatment efficiency is rising steadily. The technology gap between the Central/Western area and the Eastern area is narrowing, particularly concerning pollution treatment technology. We thus conclude that though the Central Government’s environmental policies fail to solve the inner contradiction between economic and environmental systems, and they indirectly contribute to the expansion of pollutant treatment technology among the Eastern, Central, and Western areas, which is conducive to the coordinated development among different areas.

  14. Effect of the number of two-wheeled containers at a gathering point on the energetic workload and work efficiency in refuse collecting

    NARCIS (Netherlands)

    Kuijer, P. Paul F. M.; van der Beek, Allard J.; van Dieën, Jaap H.; Visser, Bart; Frings-Dresen, Monique H. W.

    2002-01-01

    The effect of the number of two-wheeled containers at a gathering point on the energetic workload and the work efficiency in refuse collecting was studied in order to design an optimal gathering point for two-wheeled containers. Three sizes of gathering points were investigated, i.e. with 2, 16 and

  15. Development of Ultra-Efficient Electric Motors Final Technical Report Covering work from April 2002 through September 2007

    International Nuclear Information System (INIS)

    Rich Schiferl

    2008-01-01

    High temperature superconducting (HTS) motors offer the potential for dramatic volume and loss reduction compared to conventional, high horsepower, industrial motors. This report is the final report on the results of eight research tasks that address some of the issues related to HTS motor development that affect motor efficiency, cost, and reliability

  16. Factors influencing the work efficiency of district health managers in low-resource settings: a qualitative study in Ghana.

    Science.gov (United States)

    Bonenberger, Marc; Aikins, Moses; Akweongo, Patricia; Wyss, Kaspar

    2016-01-14

    There is increasing evidence that good district management practices can improve health system performance and conversely, that poor and inefficient management practices have detrimental effects. The aim of the present study was to identify factors contributing to inefficient management practices of district health managers and ways to improve their overall efficiency. Nineteen semi-structured interviews were conducted with district health managers in three districts of the Eastern Region in Ghana. The 19 interviews conducted comprised 90% of the managerial workforce in these districts in 2013. A thematic analysis was carried out using the WHO's leadership and management strengthening framework to structure the results. Key factors for inefficient district health management practices were identified to be: human resource shortages, inadequate planning and communication skills, financial constraints, and a narrow decision space that constrains the authority of district health managers and their ability to influence decision-making. Strategies that may improve managerial efficiency at both an individual and organizational level included improvements to planning, communication, and time management skills, and ensuring the timely release of district funds. Filling District Health Management Team vacancies, developing leadership and management skills of district health managers, ensuring a better flow of district funds, and delegating more authority to the districts seems to be a promising intervention package, which may result in better and more efficient management practices and stronger health system performance.

  17. Policy implications of the purchasing intentions towards energy-efficient appliances among China’s urban residents: Do subsidies work?

    International Nuclear Information System (INIS)

    Wang, Zhaohua; Wang, Xiaomeng; Guo, Dongxue

    2017-01-01

    Incentive policies are always used to sway purchase, retail stocking, and production decisions toward energy-efficient products by many countries or regions. So the effectiveness of such subsidies has been of much concern to scholars. This research focused on whether, or not, subsidy policies have guided people's intentions and behaviours. We investigated 436 urban residents from 22 provinces in China, covering the seven major geographic regions, and made an empirical analysis of the factors influencing Chinese urban residents’ purchasing intentions towards energy-efficient appliances based on the structural equation model. On theoretical aspect, we developed the theory of planned behaviour. Our results show that the variable “POLICY” is insignificant which indicates that policy environment and media propaganda in China do not have significant effect on Chinese residents’ willingness to pay for energy-efficient appliances. While, the residents’ environmental awareness, past purchasing experiences, social relationships, age, and level of education all exert a significant influence on Chinese residents’ purchasing intentions. Finally, based on the above research results, the corresponding policy suggestions which mainly focus on the time of subsidy, the object of subsidy and the method of subsidy are offered for policy makers. - Highlights: • We researched people’s behaviour combined with a policy implementation background. • We found that the subsidy policy didn’t change people’s purchase intentions. • Past purchasing experiences significantly influence consumers’ purchase intentions. • We proposed policy advices about the time, types and methods of incentive policies.

  18. Relação cinemática em um trator 4x2 com tração dianteira auxiliar equipado com pneus radiais na eficiência de tração Kinematic relation on radial tires in a front wheel assist tractor on traction efficience

    Directory of Open Access Journals (Sweden)

    Mauro Fernando Ferreira

    2000-12-01

    Full Text Available Diferentes combinações de pressões internas dos pneus do trator pode afetar a interferência entre eixos motrizes dos tratores agrícolas, principalmente com pneus do tipo radial. Um trator 4x2 com tração dianteira auxiliar foi analisado quanto a seu desempenho em tração. Pneus de carcaça radial com diferentes pressões internas foram utilizados, com o objetivo de variar as relações cinemá ticas entre os eixos. Mediram-se o patinamento das rodas dianteiras e traseiras, a resistência ao rolamento e a força de tração, em duas condições de solo (firme e solto. Os resultados obtidos permitiram verificar que a eficiência de tração não foi significativamente influenciada pela variação das relações cinemáticas de 0,962 a 1,102. As máximas eficiências de tração ocorreram com relaçõ es cinemáticas variáveis dentro da faixa estudada e de acordo com as cargas impostas à barra de tração.Different combinations of tractor tire inflating pressure may affect interference between tractor axles, mainly with radial tires type. A front wheel assist tractor was studied in its traction performance. Radial tires with different inflation pressure were used, changing kinematic relations between axles. The measured parameters were: front and rear slip, rolling resistence and drawbar pull in two soil conditions (firm and loose. The results indicate that traction efficience was not significantly influenced by kinematic relations variation between 0.962 to 1.102. The maximum traction efficiency ocurred within the range studied and according to drawbar pull.

  19. Incentivizing energy-efficient behavior at work: An empirical investigation using a natural field experiment on eco-driving

    International Nuclear Information System (INIS)

    Schall, Dominik L.; Mohnen, Alwine

    2017-01-01

    Highlights: • We conduct a natural field experiment on incentives for fuel-efficient driving. • A monetary and a tangible non-monetary reward for eco-driving are compared. • The non-monetary reward results in an average reduction of fuel consumption of 5%. • There is only a small reduction effect in the equivalent monetary reward treatment. • Emphasis of fun, emotional responses and frequency of recalling might play a role. - Abstract: Reducing greenhouse gas emissions is a highly prevalent goal of public policy in many countries around the world. Convincing people to drive more fuel-efficiently (“eco-driving”) can contribute substantially to this goal and is often an integral part of policy initiatives. However, there is a lack of scientific studies on the effects of individual monetary and non-monetary incentives for eco-driving, especially in organizational settings and with regards to demonstrating causality, e.g., by using controlled experiments. We address this gap with a six months long controlled natural field experiment and introduce a monetary and a non-monetary reward for eco-driving to drivers of light commercial vehicles in different branches of a logistics company. Our results show an average reduction of fuel consumption of 5% due to a tangible non-monetary reward and suggest only a small reduction of the average fuel consumption in the equivalent monetary reward treatment. We find indications that more emphasis on the fun of achieving a higher fuel efficiency, a more emotional response to non-monetary incentives, and a higher frequency of thinking and talking about non-monetary incentives might play a role in the stronger effect of the tangible non-monetary reward. Policy implications for private and public actors are discussed.

  20. Enhancing the efficiency of dye-sensitized solar cells by adding diatom frustules into TiO{sub 2} working electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Der-Ray, E-mail: derray@mail.ndhu.edu.tw; Jiang, Yan-Jang; Liou, Run-Lin; Chen, Chih-Han; Chen, Yi-An; Tsai, Chih-Hung, E-mail: cht@mail.ndhu.edu.tw

    2015-08-30

    Graphical abstract: - Highlights: • High-speed centrifugal processing and sedimentation-rate separation techniques were used to obtain diatom frustules. • Diatom frustules were added into TiO{sub 2} paste to prepare a TiO{sub 2}-diatom paste mixture. • TiO{sub 2}-diatom paste mixture was used to fabricate working electrodes for DSSCs. • TiO{sub 2}-diatom electrodes improved the light-trapping effect and DSSC efficiency. • DSSCs with using the TiO{sub 2}-diatom electrode exhibited a 38% increase in efficiency. - Abstract: In this study, diatom frustules were added into TiO{sub 2} paste to prepare a TiO{sub 2}-diatom paste mixture. Spin-coating and high-temperature sintering techniques were then used to fabricate working electrodes for dye-sensitized solar cells (DSSCs). Mixing the diatom frustules with the TiO{sub 2} paste improved the light-trapping effect and scattering properties of the incident light in the TiO{sub 2}-diatom working electrodes, thereby enhancing the power conversion efficiency of the DSSCs. In this study, a high-speed centrifugal processing technology and sedimentation-rate separation techniques were first used to obtain the diatom frustules, which were then mixed with the TiO{sub 2} paste at a weight ratio of 1:50; a spin-coating technique was then used to fabricate the working electrodes. Finally, a high-temperature sintering process (500 °C) was performed. In this study, optical microscopy, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and a surface profiler and spectrometer were used to analyze the characteristics of the working electrodes. The TiO{sub 2} or TiO{sub 2}-diatom working electrodes were prepared under various spin-coating conditions for fabricating and analyzing the characteristics of the DSSCs. The results indicated that under identical conditions, the power conversion efficiency of the DSSCs was 3.81% when coated three times with a conventional TiO{sub 2

  1. A Study Regarding the Efficiency of the Electromagnetic Induction Thermal Treatment Process Depending to the Work Frequency

    Directory of Open Access Journals (Sweden)

    MICH-VANCEA Claudiu

    2011-05-01

    Full Text Available The paper is focused on the induction heating for thermal treatments to make more efficient this process, using the numerical simulation. In the first part we analyze the parameters that can changethe dept penetration of the electromagnetic field in the hardened piece. The frequency of the electromagnetic field can be imposed, and by this parameter we can control the hardened layer in piece. In second part of the paper, is presented the numerical simulation in 1Dfor the induction heating process for hardening. The results obtained are helping the designer and the enduser to choose the best configuration of the induction heating and cooling systems that fulfils the most stringent requirements needed for hardened piece.

  2. Spatial working memory in immersive virtual reality foraging: path organization, traveling distance and search efficiency in humans (Homo sapiens).

    Science.gov (United States)

    De Lillo, Carlo; Kirby, Melissa; James, Frances C

    2014-05-01

    Search and serial recall tasks were used in the present study to characterize the factors affecting the ability of humans to keep track of a set of spatial locations while traveling in an immersive virtual reality foraging environment. The first experiment required the exhaustive exploration of a set of locations following a procedure previously used with other primate and non-primate species to assess their sensitivity to the geometric arrangement of foraging sites. The second experiment assessed the dependency of search performance on search organization by requiring the participants to recall specific trajectories throughout the foraging space. In the third experiment, the distance between the foraging sites was manipulated in order to contrast the effects of organization and traveling distance on recall accuracy. The results show that humans benefit from the use of organized search patterns when attempting to monitor their travel though either a clustered "patchy" space or a matrix of locations. Their ability to recall a series of locations is dependent on whether the order in which they are explored conformed or did not conform to specific organization principles. Moreover, the relationship between search efficiency and search organization is not confounded by effects of traveling distance. These results indicate that in humans, organizational factors may play a large role in their ability to forage efficiently. The extent to which such dependency may pertain to other primates and could be accounted for by visual organization processes is discussed on the basis of previous studies focused on perceptual grouping, search, and serial recall in non-human species. © 2013 Wiley Periodicals, Inc.

  3. A model for construction of efficiency and stability maps of hot working processes in polycrystalline metallic materials using the Garofalo's equation

    International Nuclear Information System (INIS)

    Rieiro, I.; Fernandez, A.; Martinez, A.; Casi, M.

    1998-01-01

    Has been developed a fast and easy method for to evaluate the efficiency of the process and some or possible stabilities situations in the hot working process for the polycrystalline metallic materials (p.m.m.), by the obtained dates in the Garofalo's equation resolution for the steady state creep and for wide ranges of the work variables, stress, strain rate and temperature. These method use the fitting parameters obtained for the equation mentioned and of their physical meaning. Has been developed the numerical treatment from our previously developed software for the analysis of creep and we can obtained the efficiency energetic maps for the creep and the more generally advises areas for the hot working. Further more has been obtained maps for parameters of great physical significance; f.e. the effective activation energy for different areas of the materials hot working, and in addition has been developed a method for obtained the values of {n P L} for the different ranges of power-law application, when has been obtained the value of { n G } in the Garofalo's equation. (Author) 13 refs

  4. The efficiency of training for doctors of general practice — family medicine concerning to features work of teenagers at risk

    Directory of Open Access Journals (Sweden)

    Bobkova O.V.

    2016-05-01

    Full Text Available Medical personnel provide assistance to teenagers and young people because of understanding their problems and a common search for ways to resolve them to change risky behavior and health. A major problem for doctors of general practice — family medicine is the condition of adolescent morbidity diseases that are transmitted mainly through sexual contact, HIV infection, which requires the formation of the teenagers responsible attitude to their own health. Doctor of general practice — family medicine should actively influence on health status, including reproductive health specified target group of patients. The aim of the study was analysis of the effectiveness of educational training on( monitoring and evaluation M & E within the scientific support project «HIV prevention among young women of sex business, people who inject drugs and young people who live or work on the street» and development of an effective system of improving professional qualification of doctors of general practice — family medicine relative characteristics of health care among risk adolescents. During 2015 there were trainings for doctors, psychologists, social workers and nurses. Investigation of the effectiveness of the activities performed on a specially designed questionnaire monitoring and evaluation (M & E. 53 respondents were interviewed — doctors of general practice — family medicine of the Zaporozhye region and the city. Zaporozhye. Questioning was conducted before and after training exercises investigated by experts of department of medical care teenagers and youth KU «Zaporozhye Regional Children Clinical Hospital.» The rating was given on a 5-point scale. The study made the following findings: therapeutic and preventive work with teenagers and young people, is one of the major problems of medical and social work in Ukraine and practice of general practitioner — family medicine; training on the basis of a single M & E system is an effective means

  5. Efficiency of overhead ceiling lifts in reducing musculoskeletal injury among carers working in long-term care institutions.

    Science.gov (United States)

    Alamgir, Hasanat; Yu, Shicheng; Fast, Catherine; Hennessy, Stephanie; Kidd, Catherine; Yassi, Annalee

    2008-05-01

    A longitudinal study was conducted in three long-term care facilities to evaluate the effectiveness and cost benefit of overhead lifts in reducing the risk of musculoskeletal injury among healthcare workers. Analysis of injury trends spanning 6 years before intervention (1996-2001) and 4 years after intervention (2002-2005) found a significant and sustained decrease in workers' compensation claims per number of beds and in working days lost per bed. The payback period was estimated under various assumptions and varied from 6.3 to 6.2 years if only direct claim-cost savings were included, and from 2.06 to 3.20 years when indirect savings were added. The significant reductions in injury rates and compensation claims support intervention with overhead ceiling lifts. A more comprehensive evaluation of such programmes should incorporate in the analysis important variables such as staffing ratios, job stresses, injury reporting systems and compensation policies during the study period.

  6. A system to test the ground surface conditions of construction sites--for safe and efficient work without physical strain.

    Science.gov (United States)

    Koningsveld, Ernst; van der Grinten, Maarten; van der Molen, Henk; Krause, Frank

    2005-07-01

    Ground surface conditions on construction sites have an important influence on the health and safety of workers and their productivity. The development of an expert-based "working conditions evaluation" system is described, intended to assist site managers in recognising unsatisfactory ground conditions and remedying these. The system was evaluated in the period 2002-2003. The evaluation shows that companies recognize poor soil/ground conditions as problematic, but are not aware of the specific physical workload hazards. The developed methods allow assessment of the ground surface quality and selection of appropriate measures for improvement. However, barriers exist at present to wide implementation of the system across the industry. Most significant of these is that responsibility for a site's condition is not clearly located within contracting arrangements, nor is it a topic of serious negotiation.

  7. Assessment of myocardial metabolic flexibility and work efficiency in human type 2 diabetes using 16-[18F]fluoro-4-thiapalmitate, a novel PET fatty acid tracer.

    Science.gov (United States)

    Mather, K J; Hutchins, G D; Perry, K; Territo, W; Chisholm, R; Acton, A; Glick-Wilson, B; Considine, R V; Moberly, S; DeGrado, T R

    2016-03-15

    Altered myocardial fuel selection likely underlies cardiac disease risk in diabetes, affecting oxygen demand and myocardial metabolic flexibility. We investigated myocardial fuel selection and metabolic flexibility in human type 2 diabetes mellitus (T2DM), using positron emission tomography to measure rates of myocardial fatty acid oxidation {16-[(18)F]fluoro-4-thia-palmitate (FTP)} and myocardial perfusion and total oxidation ([(11)C]acetate). Participants underwent paired studies under fasting conditions, comparing 3-h insulin + glucose euglycemic clamp conditions (120 mU·m(-2)·min(-1)) to 3-h saline infusion. Lean controls (n = 10) were compared with glycemically controlled volunteers with T2DM (n = 8). Insulin augmented heart rate, blood pressure, and stroke index in both groups (all P work efficiency was lower in T2DM (P = 0.006) and decreased in both groups with the insulin-induced increase in work and shift in fuel utilization (P = 0.01). Augmented fatty acid oxidation is present under baseline and insulin-treated conditions in T2DM, with impaired insulin-induced shifts away from fatty acid oxidation. This is accompanied by reduced work efficiency, possibly due to greater oxygen consumption with fatty acid metabolism. These observations suggest that improved fatty acid suppression, or reductions in myocardial fatty acid uptake and retention, could be therapeutic targets to improve myocardial ischemia tolerance in T2DM. Copyright © 2016 the American Physiological Society.

  8. The Nuclear Suppliers Group Information Sharing (NISS): Putting technology to work for a more effective and efficient supplier arrangement

    International Nuclear Information System (INIS)

    Dedik, T.; Goorevich, R.S.; Thorne, C.E.

    1995-01-01

    The need for accurate and complete information and the need to have the information in a timely manner are needs which permeate the Guidelines of the Nuclear Suppliers Group (NSG), both Parts 1 and 2. In response to these needs, the US Department of Energy is sponsoring the development and deployment of a computerized information sharing system among all of the member states of the NSG and at the Permanent Mission of Japan in Vienna, the NSG Point of Contact or Secretariat. The system when fully deployed and operation will be supportive of both the nuclear nonproliferation objectives and the commercial interests of the member states by access to a wide range of policy and technical information. The NSG Information Sharing System, or NISS, has three major components. The first feature of the NISS is its ability to rapidly transmit notifications of export denials to export control officials in the capitals of the member states. An electronic mail capability will provide a means of informal communications among persons engaged in all aspects of the work of the NSG, including license review and preparation for the meetings of the Group. A final feature of the NISS is its ability to provide rapid access to a comprehensive library of reference documents and a complete and up-to-date set of records of the NSG meetings

  9. Feasible, Efficient and Necessary, without Exception - Working with Sex Workers Interrupts HIV/STI Transmission and Brings Treatment to Many in Need.

    Science.gov (United States)

    Steen, Richard; Wheeler, Tisha; Gorgens, Marelize; Mziray, Elizabeth; Dallabetta, Gina

    2015-01-01

    High rates of partner change in sex work-whether in professional, 'transactional' or other context-disproportionately drive transmission of HIV and other sexually transmitted infections. Several countries in Asia have demonstrated that reducing transmission in sex work can reverse established epidemics among sex workers, their clients and the general population. Experience and emerging research from Africa reaffirms unprotected sex work to be a key driver of sexual transmission in different contexts and regardless of stage or classification of HIV epidemic. This validation of the epidemiology behind sexual transmission carries an urgent imperative to realign prevention resources and scale up effective targeted interventions in sex work settings, and, given declining HIV resources, to do so efficiently. Eighteen articles in this issue highlight the importance and feasibility of such interventions under four themes: 1) epidemiology, data needs and modelling of sex work in generalised epidemics; 2) implementation science addressing practical aspects of intervention scale-up; 3) community mobilisation and 4) the treatment cascade for sex workers living with HIV. Decades of empirical evidence, extended by analyses in this collection, argue that protecting sex work is, without exception, feasible and necessary for controlling HIV/STI epidemics. In addition, the disproportionate burden of HIV borne by sex workers calls for facilitated access to ART, care and support. The imperative for Africa is rapid scale-up of targeted prevention and treatment, facilitated by policies and action to improve conditions where sex work takes place. The opportunity is a wealth of accumulated experience working with sex workers in diverse settings, which can be tapped to make up for lost time. Elsewhere, even in countries with strong interventions and services for sex workers, an emerging challenge is to find ways to sustain them in the face of declining global resources.

  10. Cost-efficiency of specialist inpatient rehabilitation for working-aged adults with complex neurological disabilities: a multicentre cohort analysis of a national clinical data set.

    Science.gov (United States)

    Turner-Stokes, Lynne; Williams, Heather; Bill, Alan; Bassett, Paul; Sephton, Keith

    2016-02-24

    To evaluate functional outcomes, care needs and cost-efficiency of specialist rehabilitation for a multicentre cohort of inpatients with complex neurological disability, comparing different diagnostic groups across 3 levels of dependency. A multicentre cohort analysis of prospectively collected clinical data from the UK Rehabilitation Outcomes Collaborative (UKROC) national clinical database, 2010-2015. All 62 specialist (levels 1 and 2) rehabilitation services in England. Working-aged adults (16-65 years) with complex neurological disability. all episodes with length of stay (LOS) 8-400 days and complete outcome measures recorded on admission and discharge. Total N=5739: acquired brain injury n=4182 (73%); spinal cord injury n=506 (9%); peripheral neurological conditions n=282 (5%); progressive conditions n=769 (13%). Specialist inpatient multidisciplinary rehabilitation. Dependency and care costs: Northwick Park Dependency Scale/Care Needs Assessment (NPDS/NPCNA). Functional independence: UK Functional Assessment Measure (UK Functional Independence Measure (FIM)+FAM). Cost-efficiency: (1) time taken to offset rehabilitation costs by savings in NPCNA-estimated costs of ongoing care, (2) FIM efficiency (FIM gain/LOS days), (3) FIM+FAM efficiency (FIM+FAM gain/LOS days). Patients were analysed in 3 groups of dependency. Mean LOS 90.1 (SD 66) days. All groups showed significant reduction in dependency between admission and discharge on all measures (paired t tests: pSpecialist rehabilitation can be highly cost-efficient for all neurological conditions, producing substantial savings in ongoing care costs, especially in high-dependency patients. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  11. Impact of the recession on the realization of the Kyoto target and the 2011 target of the working programme 'Clean and Efficient'. Memo

    International Nuclear Information System (INIS)

    2009-01-01

    By request of the Dutch Ministry of Housing, Spatial Planning and the Environment the Environmental Assessment Agency (PBL) drew up this memo on the impact of the recession on the realization of the Kyoto target and the intermediate target for 2011 from the working programme Clean and Efficient. The main conclusion of this memo is that both with and without the recession the Kyoto target will probably be realized. The main difference lies in the volume of emission allowances deployed by the government to realize the target [mk] [nl

  12. Feasible, Efficient and Necessary, without Exception – Working with Sex Workers Interrupts HIV/STI Transmission and Brings Treatment to Many in Need

    Science.gov (United States)

    Steen, Richard; Wheeler, Tisha; Gorgens, Marelize; Mziray, Elizabeth; Dallabetta, Gina

    2015-01-01

    Background and Overview High rates of partner change in sex work—whether in professional, ‘transactional’ or other context—disproportionately drive transmission of HIV and other sexually transmitted infections. Several countries in Asia have demonstrated that reducing transmission in sex work can reverse established epidemics among sex workers, their clients and the general population. Experience and emerging research from Africa reaffirms unprotected sex work to be a key driver of sexual transmission in different contexts and regardless of stage or classification of HIV epidemic. This validation of the epidemiology behind sexual transmission carries an urgent imperative to realign prevention resources and scale up effective targeted interventions in sex work settings, and, given declining HIV resources, to do so efficiently. Eighteen articles in this issue highlight the importance and feasibility of such interventions under four themes: 1) epidemiology, data needs and modelling of sex work in generalised epidemics; 2) implementation science addressing practical aspects of intervention scale-up; 3) community mobilisation and 4) the treatment cascade for sex workers living with HIV. Conclusion Decades of empirical evidence, extended by analyses in this collection, argue that protecting sex work is, without exception, feasible and necessary for controlling HIV/STI epidemics. In addition, the disproportionate burden of HIV borne by sex workers calls for facilitated access to ART, care and support. The imperative for Africa is rapid scale-up of targeted prevention and treatment, facilitated by policies and action to improve conditions where sex work takes place. The opportunity is a wealth of accumulated experience working with sex workers in diverse settings, which can be tapped to make up for lost time. Elsewhere, even in countries with strong interventions and services for sex workers, an emerging challenge is to find ways to sustain them in the face of

  13. Enhancing the efficiency of a three-lobe roots blower by means of by-passing gas to the working cavity through an ejector adaptor

    Science.gov (United States)

    Vizgalov, S. V.; Volkov, M. V.; Chekushkin, G. N.; Khisameev, I. G.

    2017-08-01

    A positive displacement Roots blower with two- or three-lobe straight-tooth or twisted rotors demonstrates high performance with small specific dimensions and is used to boost internal combustion engines, aerate tanks of treatment facilities, is employed in air and gas transport systems in the food, petrochemical and metallurgical industry. It is common knowledge that several solutions have been implemented in Roots blower designs with straight-tooth with three-lobe or more-lobes rotors. It is more practical to bypass a portion of the compressed gas to the working cavity of the blower through an ejector. The purpose of developing a mathematical model for a blower working in conjunction with an ejector adapter and the further research is to determine the efficiency of this scheme un-der different discharge pressure conditions and different ejector active flow temperatures (the gas cooling effect before the nozzle).

  14. SiC-based neutron detector in quasi-realistic working conditions: efficiency and stability at room and high temperature under fast neutron irradiations

    Energy Technology Data Exchange (ETDEWEB)

    Ferone, Raffaello; Issa, Fatima; Ottaviani, Laurent; Biondo, Stephane; Vervisch, Vanessa [IM2NP, UMR CNRS 7334, Aix-Marseille University, Case 231,13397 Marseille Cedex 20, (France); Szalkai, Dora; Klix, Axel [KIT- Karlsruhe Institute of Technology, Institute of Neutron Physics and Reactor Technology Karlsruhe 76344, (Germany); Vermeeren, Ludo [SCK-CEN, Boeretang 200, B-2400 Mol, (Belgium); Saenger, Richard [Schlumberger, Clamart, (France); Lyoussi, Abadallah [CEA, DEN, Departement d' Etudes des Reacteurs, Service de Physique Experimentale, Laboratoire Dosimetrie Capteurs Instrumentation, 13108 Saint-Paul-lez-Durance, (France)

    2015-07-01

    In the framework of the European I SMART project, we have designed and made new SiC-based nuclear radiation detectors able to operate in harsh environments and to detect both fast and thermal neutrons. In this paper, we report experimental results of fast neutron irradiation campaign at high temperature (106 deg. C) in quasi-realistic working conditions. Our device does not suffer from high temperature, and spectra do show strong stability, preserving features. These experiments, as well as others in progress, show the I SMART SiC-based device skills to operate in harsh environments, whereas other materials would strongly suffer from degradation. Work is still demanded to test our device at higher temperatures and to enhance efficiency in order to make our device fully exploitable from an industrial point of view. (authors)

  15. Advanced control systems to improve nuclear power plant reliability and efficiency. Working material. Report of an advisory group meeting held in Vienna, 13-17 March, 1995

    International Nuclear Information System (INIS)

    1995-01-01

    The Advisory Group Meeting as a consequence of the recommendations of the IAEA International Working Group on Nuclear Power Plant Control and Instrumentation to produce a practical guidance on the application of the advanced control systems available for nuclear power plant operation. The objective of the IAEA advisory group meeting were: To provide an international forum of exchange of ideas and views for the purpose of enhancement of nuclear power plant reliability and efficiency by adopting advanced control technologies; to develop a scope, table of content, and extended outlines for an IAEA technical document on the subject. The present volume contains summary report, materials prepared by the meeting, and reports presented by national delegates. Refs, figs and tabs

  16. Efficacy of Cognitive Training in Older Adults with and without Subjective Cognitive Decline Is Associated with Inhibition Efficiency and Working Memory Span, Not with Cognitive Reserve.

    Science.gov (United States)

    López-Higes, Ramón; Martín-Aragoneses, María T; Rubio-Valdehita, Susana; Delgado-Losada, María L; Montejo, Pedro; Montenegro, Mercedes; Prados, José M; de Frutos-Lucas, Jaisalmer; López-Sanz, David

    2018-01-01

    The present study explores the role of cognitive reserve, executive functions, and working memory (WM) span, as factors that might explain training outcomes in cognitive status. Eighty-one older adults voluntarily participated in the study, classified either as older adults with subjective cognitive decline or cognitively intact. Each participant underwent a neuropsychological assessment that was conducted both at baseline (entailing cognitive reserve, executive functions, WM span and depressive symptomatology measures, as well as the Mini-Mental State Exam regarding initial cognitive status), and then 6 months later, once each participant had completed the training program (Mini-Mental State Exam at the endpoint). With respect to cognitive status the training program was most beneficial for subjective cognitive decline participants with low efficiency in inhibition at baseline (explaining a 33% of Mini-Mental State Exam total variance), whereas for cognitively intact participants training gains were observed for those who presented lower WM span.

  17. Evaluation of energy efficient techniques in the wood working and wood processing industry. Final report THERMIE - Action no. DIS-0059-95-DE

    Energy Technology Data Exchange (ETDEWEB)

    Eichhammer, W.; Digutsch, O.; Frey, G. v. [and others

    1997-05-01

    With the entrance of Austria, Finland and Sweden in the European Union beginning of 1995 the pattern of industrial energy consumption has changed considerably in some branches which are large energy consumers in the Northern countries. The wood working and wood processing industry is one of those branches. It comprises the preparation of wood from primary processing in sawmills up to the production of finished products, and is highly energy-intensive although to a somewhat smaller extent than the large energy consumers such as the iron and steel production or glass manufacturing. It can further be assumed that official statistics underestimate the real importance of the energy consumption in the wood sector because most official statistics do not indicate waste wood as a fuel. Waste wood is a renewable fuel and has as such not the same impact in terms of CO{sub 2}-emissions as fossil fuels. Nevertheless, renewable energy sources should be also used efficiently because they can replace fossil fuels for other purposes. The objective of this study on the wood sector were to analyse and summarise the present status of energy consumption in the fifteen countries of the EU and the two EFTA countries Norway and Switzerland, to evaluate present day energy technology in the wood industry, and to investigate existing application barriers to these techniques in order to inform, support and to motivate small and medium-sized companies in particular, thus simulating the wide spread use of such techniques. (orig./SR)

  18. CO2 reduction in the Danish transportation sector. Working paper 5: Technological improvement of energy efficiency. Average requirements to energy efficiency of the new vehicles. Subsidies to research and development

    International Nuclear Information System (INIS)

    1997-03-01

    The road traffic is expected to be responsible for 9/10 of the total CO 2 emission from transportation sector in 2005. Especially private cars contribute more than half of the total CO 2 emission. Cars are not produced in Denmark, so energy efficiency of the new models depends entirely on the foreign manufacturers. Measurements of energy efficiency on test facilities show usually slightly better efficiency than on-the-road results. Efficiency estimates are based on test results. Within 10-15 years the whole car park will show essential efficiency improvement due to exchanging to newer models. Shadow price of CO 2 emission reduction is defined. (EG) Prepared for Trafikministeriet. 27 refs

  19. Datafit. A new work flow oriented approach for time efficient data preparation, validation and flagging of time series data from environmental monitoring

    International Nuclear Information System (INIS)

    Ries, Ludwig

    2013-01-01

    Standardized quality assurance according to UN/WMO Global Atmosphere Watch (GAW) data quality objectives is essential for a homogeneous high level of data quality in GAW world data centers. However data processing and data preparation often times is done individually and in a non-standardized way. As an additional problem interactive data validation can be a very time consuming step on a GAW measurement station. In front of this background a new approach for a software solution with a set of time efficient and standardized methods is proposed which also can be used as a tool for future standardization of data quality assurance on GAW measurement stations. In general in order to prepare measurement data a set of methods is required. In the framework of this program the methods are ranked in two groups: first - simpler methods for managing structural changes and corrections in the time series data and second - higher developed methods for assuring a correct time structure, graphical control and flagging non representative data and for the calculation of differently or higher aggregated mean values and statistical values. By fulfilling the auxiliary condition that data treatment at first has to be finished with application of methods of group one the user is practically free in finding and selecting its way for a solution. Once the user has found an ordered set of methods and parameters which is a sufficient solution for the preparation of the actual data, the solution can be stored as a set of parameters for the individual project. This enables the user for repeating the solution at another time to another set of time series data which are produced with the same data format from the same instrument. This structure is characteristic and useful for continuous environmental monitoring which produces a high amount of time series data with a constant data format. By saving all intermediate results in a hierarchical way with a fixed naming convention, in a later time the

  20. CO2 reduction in the Danish transportation sector. Working paper 10: Energy efficiency of the private cars - a package of control measures

    International Nuclear Information System (INIS)

    1997-03-01

    Average requirements to automotive fuel efficiency in new cars and differentiation of registration and weight taxes according to fuel consumption by a car result in fewer new cars due to very high registration tax and lower driving costs per km, which is against the CO 2 reduction measure. More efficient car manufacturing would eventually lead to a lower registration tax. Higher tax on fuels is another solution to the problem. (EG)

  1. Work cabinet

    International Nuclear Information System (INIS)

    Hornby, L.

    1981-01-01

    A simple work cabinet is described for handling materials such as radiopharmaceuticals. The cabinet includes a perforated working surface to which an operator can gain hand and forearm access through an aperture. Clean air is supplied through a high efficiency particulate air filter and withdrawn through the perforated surface. (U.K.)

  2. Delivering Cost-Efficient Public Services in Health Care, Education and Housing in Chile. OECD Economics Department Working Papers, No. 606

    Science.gov (United States)

    Moccero, D.

    2008-01-01

    The Chilean authorities plan to raise budgetary allocations over the medium term for a variety of social programmes, including education, health care and housing. This incremental spending will need to be carried out in a cost-efficient manner to make sure that it yields commensurate improvements in social outcomes. Chile's health indicators show…

  3. How efficient work biomass cogeneration plants? A survey of plant operators; Wie effizient arbeiten Biomasseheiz(kraft)werke? Befragung von Anlagenbetreibern

    Energy Technology Data Exchange (ETDEWEB)

    Meiller, Martin; Jakuttis, Michael [Fraunhofer-Institut fuer Umwelt-, Sicherheits- und Energietechnik UMSICHT, Sulzbach-Rosenberg (Germany); Binder, Samir [Fraunhofer-Institut fuer Umwelt-, Sicherheits- und Energietechnik UMSICHT, Sulzbach-Rosenberg (Germany); Bayerischer Forschungsverbund Foreta, Sulzbach-Rosenberg (Germany)

    2013-03-01

    The use of biomass has increased very much in recent years. Due to the intensive use, the price of biomass fuels such as wood chips has increased substantially. This development bothers mainly biomass cogeneration plants. Many operators suffered considerable financial losses or even had to file for bankruptcy. The topic of efficiency is one of the central and critical success factors for the long-term viability of biomass-fired plants. (orig.)

  4. A detailed study on the working mechanism of a heteropoly acid modified TiO2 photoanode for efficient dye-sensitized solar cells.

    Science.gov (United States)

    Jiang, Yanxia; Yang, Yulin; Qiang, Liangsheng; Fan, Ruiqing; Li, Liang; Ye, Tengling; Na, Yong; Shi, Yan; Luan, Tianzhu

    2015-03-14

    A novel heteropolyacid (HPA) K6SiW11O39Ni(H2O)·xH2O (SiW11Ni) modified TiO2 has been successfully synthesized and introduced into the photoanode of dye-sensitized solar cells (DSSCs). The performance of the cell with the HPA-modified photoanode (SiW11Ni/TiO2), mixed with P25 powder in the ratio of 2 : 8, is better than the cell with a pristine P25 photoanode. An increase of 31% in the photocurrent and 22% improvement in the conversion efficiency are obtained. The effect of the heteropolyacid was well studied by UV-vis spectroscopy, spectro-electrochemical spectroscopy, dark current, intensity-modulated photocurrent spectroscopy and intensity-modulated photovoltage spectroscopy, open-circuit voltage decay and electrochemical impedance spectroscopy. The results show that the interfacial layer modified by SiW11Ni can enhance the injection and transport of electrons, and then retard the recombination of electrons, which results in a longer electron lifetime. What's more, the introduction of SiW11Ni can simultaneously broaden the absorption in the visible region, eventually leading to an efficient increase in energy conversion efficiency.

  5. Feasible, efficient and necessary, without exception - Working with sex workers interrupts HIV/STI transmission and brings treatment to many in need

    NARCIS (Netherlands)

    R. Steen (Richard); T. Wheeler (Tisha); M. Gorgens (Marelize); E. Mziray (Elizabeth); G. Dallabetta (Gina)

    2015-01-01

    textabstractBackground and Overview. High rates of partner change in sex work-whether in professional, 'transactional' or other context-disproportionately drive transmission of HIV and other sexually transmitted infections. Several countries in Asia have demonstrated that reducing transmission in

  6. Work efficiency in the operations of juvenile thinning of mixed stands of pedunculate oak with hornbeam, ash and other hard broadleaves with the Stihl MS 260 chainsaw

    Directory of Open Access Journals (Sweden)

    Danilović Milorad

    2015-01-01

    Full Text Available This paper presents the results of research of efficacy of the lightweight low power chainsaw Stihl MS 260 in the operations of juvenile thinning in preserved even-aged mixed stands of pedunculate oak with hornbeam, ash and other hard hardwoods. The investigations were carried out in the territory of FE “Sremska Mitrovica” in three sample plots of different ages. It is the first research of this kind based on the choice of optimal technological solution for the cleaning cuts of oak stands. Technology of work is based on cutting unwanted species at a certain height in order to favor pedunculate oak as the main species. In sample plot 1 the cutting through of undesirable species was carried out in one place and then third parties carried out their processing and transportation. In sample plots 2 and 3 workers cut the unwanted species in several places and stacked the timber on the ground so as not to interfere with the growth of pedunculate oak which does not tolerate shading. In this study, we applied time and work study. Group system of work was recorded. The group typically consisted of 4 workers and a foreman. Fuel consumption was recorded by the method of tank refuelling. The research results show that operating conditions have a significant impact on the effects of work with a chainsaw, as well as on the consumption of fuel and lubricants. The differences are mainly caused by different structures of cut timber.

  7. Working Memory Capacity and Recall from Long-Term Memory: Examining the Influences of Encoding Strategies, Study Time Allocation, Search Efficiency, and Monitoring Abilities

    Science.gov (United States)

    Unsworth, Nash

    2016-01-01

    The relation between working memory capacity (WMC) and recall from long-term memory (LTM) was examined in the current study. Participants performed multiple measures of delayed free recall varying in presentation duration and self-reported their strategy usage after each task. Participants also performed multiple measures of WMC. The results…

  8. Increased efficiency and reliability of thermal power plants. Interinstitute collection of scientific works. Povysheniye ekonomichinosti i nadezhnosti teplovykh elektrostantsiy. Nezhvuz. sb. nauch. tr

    Energy Technology Data Exchange (ETDEWEB)

    Ushakov, S.G.

    1979-01-01

    This collection holds the articles of: A.V. Novikova ''Features and Criteria of the Efficiency of Energy Production''; Yu. L. Aleksandrov et. al. ''Analysis of the Link Between the Fund of Material Incentive and the Indicators of Efficient Energy Production''; E. F. Nemtsev et. al. ''Predicting the Fuel and Energy Indicators of the TES''; V. Ya. Gudzyuk et. al. ''Establishment of the Possible Continuous Fire Treatment of Suspensions With the Help of Bubbling Devices''; V. N. Vinogradov ''Calculation of the Indicators of Reliability of the Heating Surfaces of Steam-generators and Optimization of Restoration Operations''; V.Ya. Gudzyuk et. al. ''Selecting the Plan of Neutralization of Industrial Wastes in a Steam Boiler Furnace''; Yu.M. Vatigin et. al. ''Use of Heat Secondary Energy Resources''; V.A. Parilv ''Analysis of the Unit 800 MW, Unified for Combustion of the Donetsk Gas, Seed With Fines and Kuznetsk Coals With Different Systems of Dust-preparation''; R. Z. Aminov et. al. ''Calculation of Losses of Heat With Exhaust Gases of Water Heaters of the TES''; M. A. Devochkin et. al. Studies of the Heat Efficiency of the Steam-gas TETs''; B. M. Larin et. al. ''Calculation of the Technological Plan for Desalination of Water With Block Inclusion of Filters''; Ye. S. Bulankina et. al. ''Purification of Water Containing Organic Substances, By Asorption on Activated Charcoal''; Yu. S. Tverskoy et. al. ''Study of the Disturbance of the Furnace Process During Combustion of Liquid Fuel by the Bubbling Method''; V. I. Khor'kov ''Evaluating the Fuel Component in the Technological Parameters of a Steam-generator'' etc.

  9. No programming required. Mobile PCs can help physicians work more efficiently, especially when the application is designed to fit the practice.

    Science.gov (United States)

    Campbell, J

    2000-09-01

    The Jacobson Medical Group San Antonio Jacobson Medical Group (JMG) needed a way to effectively and efficiently coordinate referral information between their hospitalist physicians and specialists. JMG decided to replace paper-based binders with something more convenient and easily updated. The organization chose to implement a mobile solution that would provide its physicians with convenient access to a database of information via a hand-held computer. The hand-held solution provides physicians with full demographic profiles of primary care givers for each area where the group operates. The database includes multiple profiles based on different healthcare plans, along with details about preferred and authorized specialists. JMG adopted a user-friendly solution that the hospitalists and specialists would embrace and actually use.

  10. 资本性投资、融资来源与营运资本投资效率研究%Capital Investment,Financing Source and Working Capital Investment Efficiency

    Institute of Scientific and Technical Information of China (English)

    魏刚

    2016-01-01

    运用异质性随机边界模型定量测算了资本性投资及融资来源影响下的营运资本投资效率。结果表明:中国上市公司营运资本投资效率低于最优效率10%~26%,在非经济危机影响的年度中,资本性投资规模增长大的企业,其营运资本投资效率较低;内部融资和外部股权融资具有缓解融资约束和降低未来融资不确定性的作用,而债务融资会加剧融资约束程度,但可以降低未来融资不确定性。融资约束程度的改善有助于降低资本性投资对营运资本投资效率的影响。%Using the heteroscedastic stochastic frontier model , this paper measures the working capital investment efficiency under the influence of capital investment and financing sources .Results show that , the efficiency of working capital invest-ment in Chinese listing corporation is lower than the optimal efficiency of 10%~26%.During the years of the non-econom-ic crisis, working capital investment efficiency of enterprises is lower , which possess a large scale of capital investment .In-ternal financing and external equity financing can alleviate the financing constraints and reduce the uncertainty of the future ;debt financing will increase the degree of financing constraints , but can reduce the uncertainty of future financing .The im-provement of financing constraints could help to reduce the impact of capital investment on the efficiency of working capital investment .

  11. Time-efficient and convenient synthesis of [18F]altanserin for human PET imaging by a new work-up procedure

    International Nuclear Information System (INIS)

    Massarweh, G.; Kovacevic, M.; Rosa-Neto, P.; Evans, A.C.; Diksic, M.; Schirrmacher, R.

    2009-01-01

    [ 18 F]Altanserin, an important PET radioligand for the in vivo imaging of the 5-HT 2A receptor, was synthesized from its precursor nitro-altanserin in DMF or DMSO at high temperatures of 150 deg. C in an overall radiochemical yield (EOB) of 23-25% after 75 min. A new solid phase work-up procedure involving the acidification of the crude reaction mixture and a C18-SepPak-solid phase separation preceded the final HPLC purification. This led to a significantly reduced synthesis time as a result of a stable and early elution from the HPLC column using improved HPLC conditions (MeOH/THF/NaOAc 0.05 N pH 5: 27/18/55, flow: 5 mL/min, Symetry Prep 7 μm C18 (Waters)). The synthesis was performed semi-automatically in a modified GE TracerLab synthesis module using an in-house-developed program. The synthesized [ 18 F]altanserin was used in our ongoing human and animal PET imaging studies.

  12. Time-efficient and convenient synthesis of [{sup 18}F]altanserin for human PET imaging by a new work-up procedure

    Energy Technology Data Exchange (ETDEWEB)

    Massarweh, G. [McConnell Brain Imaging Centre, Montreal Neurological Institute, McGill University, 3801 University Street, Montreal, Quebec (Canada)], E-mail: gassan.wassarweh@mcgill.ca; Kovacevic, M.; Rosa-Neto, P.; Evans, A.C.; Diksic, M. [McConnell Brain Imaging Centre, Montreal Neurological Institute, McGill University, 3801 University Street, Montreal, Quebec (Canada); Schirrmacher, R. [McConnell Brain Imaging Centre, Montreal Neurological Institute, McGill University, 3801 University Street, Montreal, Quebec (Canada)], E-mail: ralf.schirrmacher@mcgill.ca

    2009-11-15

    [{sup 18}F]Altanserin, an important PET radioligand for the in vivo imaging of the 5-HT{sub 2A} receptor, was synthesized from its precursor nitro-altanserin in DMF or DMSO at high temperatures of 150 deg. C in an overall radiochemical yield (EOB) of 23-25% after 75 min. A new solid phase work-up procedure involving the acidification of the crude reaction mixture and a C18-SepPak-solid phase separation preceded the final HPLC purification. This led to a significantly reduced synthesis time as a result of a stable and early elution from the HPLC column using improved HPLC conditions (MeOH/THF/NaOAc 0.05 N pH 5: 27/18/55, flow: 5 mL/min, Symetry Prep 7 {mu}m C18 (Waters)). The synthesis was performed semi-automatically in a modified GE TracerLab synthesis module using an in-house-developed program. The synthesized [{sup 18}F]altanserin was used in our ongoing human and animal PET imaging studies.

  13. Energy efficiency

    International Nuclear Information System (INIS)

    Marvillet, Ch.; Tochon, P.; Mercier, P.

    2004-01-01

    World energy demand is constantly rising. This is a legitimate trend, insofar as access to energy enables enhanced quality of life and sanitation levels for populations. On the other hand, such increased consumption generates effects that may be catastrophic for the future of the planet (climate change, environmental imbalance), should this growth conform to the patterns followed, up to recent times, by most industrialized countries. Reduction of greenhouse gas emissions, development of new energy sources and energy efficiency are seen as the major challenges to be taken up for the world of tomorrow. In France, the National Energy Debate indeed emphasized, in 2003, the requirement to control both demand for, and offer of, energy, through a strategic orientation law for energy. The French position corresponds to a slightly singular situation - and a privileged one, compared to other countries - owing to massive use of nuclear power for electricity generation. This option allows France to be responsible for a mere 2% of worldwide greenhouse gas emissions. Real advances can nonetheless still be achieved as regards improved energy efficiency, particularly in the transportation and residential-tertiary sectors, following the lead, in this respect, shown by industry. These two sectors indeed account for over half of the country CO 2 emissions (26% and 25% respectively). With respect to transportation, the work carried out by CEA on the hydrogen pathway, energy converters, and electricity storage has been covered by the preceding chapters. As regards housing, a topic addressed by one of the papers in this chapter, investigations at CEA concern integration of the various devices enabling value-added use of renewable energies. At the same time, the organization is carrying through its activity in the extensive area of heat exchangers, allowing industry to benefit from improved understanding in the modeling of flows. An activity evidenced by advances in energy efficiency for

  14. On the Method of Efficient Ice Cold Energy Storage Using a Heat Transfer of Direct Contact Phase Change and a Natural Circulation of a Working Medium in an Enclosure

    Science.gov (United States)

    Utaka, Yoshio; Saito, Akio; Nakata, Naoki

    The objectives of this report are to propose a new method of the high performance cold energy storage using ice as a phase change material and to clarify the heat transfer characteristics of the apparatus of ice cold energy storage based on the proposed principle. A working medium vapor layer a water layer and a working medium liquid layer stratified in this order from the top were kept in an enclosure composed of a condenser, an evaporator and a condensate receiver-and-return tube. The direct contact heat transfers between water or ice and a working medium in an enclosure were applied for realizing the high performance cold energy storage and release. In the storage and release processes, water changes the phase between the liquid and the solid, and the working medium cnanges between the vapor and the liquid with a natural circulation. Experimental apparatus was manufactured and R12 and R114 were selected as working media in the thermal energy storage enclosure. It was confirmed by the measurements that the efficient formation and melting of ice were achieved. Then, th e heat transfer characteristics were clarified for the effects of the initial water height, the initial height of woking medium liquid layer and the inlet coolant temperature.

  15. Efficient STFT

    International Nuclear Information System (INIS)

    Aamir, K.M.; Maud, M.A.

    2004-01-01

    Small perturbations in signals (or any time series), at some particular instant, affect the whole frequency spectrum due to the global function e/sup j omega t/ in Fourier Transform formulation. However, the Fourier spectrum does not convey the time instant at which the perturbation occurred. Consequently the information on the particular time instance of occurrence of that perturbation is lost when spectrum is observed. Apparently Fourier analysis seems to be inadequate in such situations. This inadequacy is overcome by the use of Short Time Fourier Transform (STFT), which keeps track of time as well as frequency information. In STFT analysis, a fixed length window, say of length N, is moved sample by sample as the data arrives. The Discrete Fourier Transform (DFT) of this fixed window of length N is calculated using Fast Fourier Transform (FFT) algorithm. If the total number of points is M > N, the computational complexity of this scheme works out to be at least ((M-N) N log/sub 2/N). On the other hand, STFT is shown to be of computational complexity 6NM and 8NM in the literature. In this paper, two algorithms are presented which compute the same STFT more efficiently. The computational complexity of the proposed algorithms works out to be MN of one algorithm and even lesser in the other algorithm. This reduction in complexity becomes significant for large data sets. This algorithm also remains valid if a stationary part of signal is skipped. (author)

  16. Energy Efficient Cryogenics

    Science.gov (United States)

    Meneghelli, Barry J.; Notardonato, William; Fesmire, James E.

    2016-01-01

    The Cryogenics Test Laboratory, NASA Kennedy Space Center, works to provide practical solutions to low-temperature problems while focusing on long-term technology targets for the energy-efficient use of cryogenics on Earth and in space.

  17. Models of Working Memory

    National Research Council Canada - National Science Library

    Miyake, Akira

    1997-01-01

    .... Understanding the mechanisms and structures underlying working memory is, hence, one of the most important scientific issues that need to be addressed to improve the efficiency and performance...

  18. Energy efficiency

    International Nuclear Information System (INIS)

    2010-01-01

    After a speech of the CEA's (Commissariat a l'Energie Atomique) general administrator about energy efficiency as a first rank challenge for the planet and for France, this publications proposes several contributions: a discussion of the efficiency of nuclear energy, an economic analysis of R and D's value in the field of fourth generation fast reactors, discussions about biofuels and the relationship between energy efficiency and economic competitiveness, and a discussion about solar photovoltaic efficiency

  19. Effect of Road Traffic Noise Pollution on Human Work Efficiency in Government Offices, Private Organizations, and Commercial Business Centres in Agartala City Using Fuzzy Expert System: A Case Study

    Directory of Open Access Journals (Sweden)

    Debasish Pal

    2012-01-01

    Full Text Available This study examines the problems of reduction of individual’s efficiency in his/her respective working places because of road traffic noise pollution in Agartala due to rapidly growing vehicular traffic. This paper deals with monitoring and modeling of the disturbances caused due to vehicular road traffic interrupted by traffic flow conditions on personal work performance. Total of two hundred seventy individuals from different road side Government Offices, Private Organizations and Commercial Business Centres on both sides of busy roads of the city were interviewed for attitudinal responses. Traffic volume count and noise indices data were collected simultaneously at six selected sites of the city. A relationship was developed between different traffic noise parameters and its harmful impact on work competency of individuals using MATLAB. Regression equations developed to predict the percentage of high annoyance among the individuals are fit based on noise parameters and parameters related to traffic movements. In addition, statistical analysis was also carried out between measured and predictive values of the percentage of highly annoyed group of individuals. The present model will draw the attention of the State Government and will help the policy maker to take the necessary steps to reduce this problem.

  20. Evaluasi Kinerja Tarik Traktor Tangan dengan Bahan Bakar Minyak Kelapa Murni

    Directory of Open Access Journals (Sweden)

    Desrial

    2010-04-01

    Full Text Available Past research shown that coconut oil can be used directly in Diesel engine by adding a heating element in the fuel delivery system. This study aims to evaluate the performance of a hand tractor pull using pure coconut oil fuel. The Diesel engine of the tractor was equipped with a fuel heater installed on the mufler. Traction performance parameters tested were wheel slippage, drawbar pull, forward speed and drawbar power on the path of concrete and soil. Besides, the tractor was also tested on plowing using a moldboard plow. The test results on the concrete track showed that the maximum drawbar pull was 1.21 kN generated at a speed of 0.92 m/s, with a maximum drawbar power of 1.21 kW at the wheel slip of 10.87%. While the drawbar pull on the soil track was 1.37 kN at a speed of 0.79 m/s, with a maximum value of 0.71 kW drawbar power when wheels slip 22.25%. The results of tillage test showed that field efficiency was 84.66%, which was not much different from the test result using Diesel fuel.

  1. Juggling Efficiency

    DEFF Research Database (Denmark)

    Andersen, Rikke Sand; Vedsted, Peter

    2015-01-01

    on institutional logics, we illustrate how a logic of efficiency organise and give shape to healthcare seeking practices as they manifest in local clinical settings. Overall, patient concerns are reconfigured to fit the local clinical setting and healthcare professionals and patients are required to juggle...... efficiency in order to deal with uncertainties and meet more complex or unpredictable needs. Lastly, building on the empirical case of cancer diagnostics, we discuss the implications of the pervasiveness of the logic of efficiency in the clinical setting and argue that provision of medical care in today......'s primary care settings requires careful balancing of increasing demands of efficiency, greater complexity of biomedical knowledge and consideration for individual patient needs....

  2. Fiscal 1999 research report. Basic research for promotion of joint implementation programs (Basic research on energy efficiency at Novolipetsk Iron and Steel Works); 1999 nendo Novolipetsk seitetsushosho energy kihon chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    A survey is conducted about whether energy efficiency improving facilities will be appropriately accommodated by the sintering process, blast furnace process, steelmaking process, and the energy process that consume energy in large quantities at the Novolipetsk Iron and Steel Works which represents Russia's steelmaking plants, which is for scouting out a project to develop into a joint implementation activity in the future. The result shows that the amount of natural gas for domestic power generators in the steelworks or the amount of power to be purchased will be reduced when large-scale exhaust heat recovery facilities are adopted. A study of the energy profile shows that there is no problem to impede the implementation of this program. Regarding the introduction of energy saving measures into the respective processes, the results of investigations conducted into the respective processes are subjected to a macroscopic study. The facilities involved include a sintering cooler exhaust heat recovery facility, hot blast furnace waste heat recovery facility, TRT (power generation by blast furnace top-pressure recovery turbines) facility, and an LDG (basic oxygen gas) recovery facility. Upon adoption of all these facilities, there will be a reduction in green effect gas (CO2) emissions of approximately 410,000 tons/year, for which a total of 20.9-billion yen will have to be invested. (NEDO)

  3. HIGH EFFICIENCY TURBINE

    OpenAIRE

    VARMA, VIJAYA KRUSHNA

    2012-01-01

    Varma designed ultra modern and high efficiency turbines which can use gas, steam or fuels as feed to produce electricity or mechanical work for wide range of usages and applications in industries or at work sites. Varma turbine engines can be used in all types of vehicles. These turbines can also be used in aircraft, ships, battle tanks, dredgers, mining equipment, earth moving machines etc, Salient features of Varma Turbines. 1. Varma turbines are simple in design, easy to manufac...

  4. Preparatory work for the start of the Swiss Compressed-Air Efficiency campaign and accompanying work on the setting-up of a compressed air competence centre; Vorarbeiten zum Start der Kampagne Druckluft effizient Schweiz und begleitende Arbeiten zum Aufbau eines Druckluftkompetenzzentrums

    Energy Technology Data Exchange (ETDEWEB)

    Radgen, P. [Fraunhofer-Institut fuer Systemtechnik und Innovationsforschung (ISI), Karlsruhe (Germany); Stadelmann, B. [Hochschule fuer Technik und Architektur (HTA) Luzern, Horw (Switzerland)

    2004-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) takes a look at how a campaign on compressed-air efficiency was prepared. Three work packages are described: The drawing-up of an implementation plan which defined the measures to be implemented by the campaign, incorporation of all relevant players in the preparation and acquisition of companies for the active realisation and co-financing of the activities, and a pilot project to optimise the compressed air supply in a chemical company. The institutions involved are introduced and the definition of the concept to be implemented is discussed. Measurement campaigns, benchmarking and publications to be made are discussed. The implementation of a pilot project at a chemicals company in Switzerland is described.

  5. Batch efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Schwickerath, Ulrich; Silva, Ricardo; Uria, Christian, E-mail: Ulrich.Schwickerath@cern.c, E-mail: Ricardo.Silva@cern.c [CERN IT, 1211 Geneve 23 (Switzerland)

    2010-04-01

    A frequent source of concern for resource providers is the efficient use of computing resources in their centers. This has a direct impact on requests for new resources. There are two different but strongly correlated aspects to be considered: while users are mostly interested in a good turn-around time for their jobs, resource providers are mostly interested in a high and efficient usage of their available resources. Both things, the box usage and the efficiency of individual user jobs, need to be closely monitored so that the sources of the inefficiencies can be identified. At CERN, the Lemon monitoring system is used for both purposes. Examples of such sources are poorly written user code, inefficient access to mass storage systems, and dedication of resources to specific user groups. As a first step for improvements CERN has launched a project to develop a scheduler add-on that allows careful overloading of worker nodes that run idle jobs.

  6. Making 'what works' work

    DEFF Research Database (Denmark)

    Plum, Maja

    2017-01-01

    and a mattress. As such, the paper shows how DR, as an evidence-based method, is established through concrete relations, rather than abstracted and universal principals. It argues that these relations stabilising DR are never enacted once and for all, but require continual work to be held together as a method...... that ‘works’....

  7. Productivity and energy efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Lovins, H. [Rocky Mountain Inst., Snowmass, CO (United States)

    1995-12-31

    Energy efficient building and office design offers the possibility of significantly increased worker productivity. By improving lighting, heating and cooling, workers can be made more comfortable and productive. An increase of 1 percent in productivity can provide savings to a company that exceed its entire energy bill. Efficient design practices are cost effective just from their energy savings. The resulting productivity gains make them indispensable. This paper documents eight cases in which efficient lighting, heating, and cooling have measurably increased worker productivity, decreased absenteeism, and/or improved the quality of work performed. They also show that efficient lighting can measurably increase work quality by removing errors and manufacturing defects. The case studies presented include retrofit of existing buildings and the design of new facilities, and cover a variety of commercial and industrial settings. Each case study identifies the design changes that were most responsible for increased productivity. As the eight case studies illustrate, energy efficient design may be one of the least expensive ways for a business to improve the productivity of its workers and the quality of its product. (author). 15 refs.

  8. Energy Efficiency Center - Overview

    International Nuclear Information System (INIS)

    Obryk, E.

    2000-01-01

    Full text: The Energy Efficiency Center (EEC) activities have been concentrated on Energy Efficiency Network (SEGE), education and training of energy auditors. EEC has started studies related to renewable fuels (bio fuel, wastes) and other topics related to environment protection. EEC has continued close collaboration with Institute for Energy Technology, Kjeller, Norway. It has been organized and conducted Seminar and Workshop on ''How to Reduce Energy and Water Cost in Higher Education Buildings'' for general and technical managers of the higher education institutions. This Seminar was proceeded by the working meeting on energy efficiency strategy in higher education at the Ministry of National Education. EEC has worked out proposal for activities of Cracow Regional Agency for Energy Efficiency and Environment and has made offer to provide services for this Agency in the field of training, education and consulting. The vast knowledge and experiences in the field of energy audits have been used by the members of EEC in lecturing at energy auditors courses authorized by the National Energy Efficiency Agency (KAPE). Altogether 20 lectures have been delivered. (author)

  9. Maintenance work management system

    International Nuclear Information System (INIS)

    Kanai, T.; Takahashi, Y.; Takahashi, K.; Nishino, M.; Takeshige, R.

    2000-01-01

    The maintenance work management system supports the efficient drawing up of various documents for the maintenance work at nuclear power stations and the speeding up of the permission procedure. In addition, it improves the quality assurance of the safety and reliability of the maintenance work. Key merits of the system are: 1. Efficiently drawing up various documents for the maintenance work by using the stored data for the previous maintenance work and the pipe and instrument diagram (P and ID) data. 2. Supporting the management work for the completion of maintenance work safety by using the isolation information stored on the computer system. 3. Speeding up the permission procedure by electronic mail and electronic permission. 4. Displaying additional information such as the specifications of equipment, maintenance result, and maintenance plan by linking up with the database of another system. 5. Reducing the cost of hardware devices by using client/server network configurations of personal computers and a personal computer server. (author)

  10. Eficiência de um conjunto fotovoltaico em condições reais de trabalho na região de Cascavel = Efficiency of the photovoltaic systems under real work conditions on region of Cascavel

    Directory of Open Access Journals (Sweden)

    Estor Gnoatto

    2008-07-01

    Full Text Available No presente trabalho, foi desenvolvido um estudo sobre um sistemafotovoltaico autônomo, com armazenamento de energia, instalado na Estação Experimental Agrometeorológica da Universidade Estadual do Oeste do Paraná, Campus Cascavel, a uma Latitude 24º59’ Sul, Longitude de 53º26’ Oeste, com altitude de 682 m, em condições reaisde campo, durante o ano de 2002. Foi avaliada a eficiência dos painéis fotovoltaicos em condições reais de campo, sua curva característica foi determinada utilizando, na aquisição de dados, um micrologger da Campbell Scientific-Inc, modelo CR10X, programado pararealizar uma leitura por segundo de cada canal e armazenar a média aritmética de 5 minutos dos dados das componentes de radiação solar global no plano horizontal e global na incidência do painel; temperatura ambiente e temperatura de operação do painel; tensão ecorrente do sistema fotovoltaico. Os resultados mostram que a eficiência média mensal registrou valores na faixa de 8,65 a 9,17%, com uma média de 8,84%, com variação percentual entre o índice máximo e mínimo de 5,67%. Pode, assim, representar fornecimento médio mensal de energia de 5,57 kWh por painel.The purpose of the present work was to develop a study of anautonomous photovoltaic system, with energy storage, installed at the Experimental Agrometeorological Station of the Universidade Estadual do Oeste do Paraná, Cascavel Campus, located at 24º59’S 53º26’W, 682 meters of altitude, under real field conditions, during the year of 2002. The efficiency of the photovoltaic modules was evaluated underreal field conditions and its characteristic linear fit was determined. A Campbell Scientific CR10X micrologger was used to acquire data, programmed to conduct one reading per second from each channel and store the five-minute arithmetic data average from thereadings of the incidence of global direct solar radiation horizontal and global on the panel, as well as area

  11. Offsetting efficiency

    International Nuclear Information System (INIS)

    Katz, M.

    1995-01-01

    Whichever way the local distribution company (LDC) tries to convert residential customers to gas or expand their use of it, the process itself has become essential for the natural gas industry. The amount of gas used by each residential customer has been decreasing for 25 years -- since the energy crisis of the early 1970s. It's a direct result of better-insulated homes and more-efficient gas appliances, and that trend is continuing. So, LDCs have a choice of either finding new users and uses for gas, or recognizing that their throughput per customer is going to continue declining. The paper discusses strategies that several gas utilities are using to increase the number of gas appliances in the customer's homes. These and other strategies keep the gas industry optimistic about the future of the residential market: A.G.A. has projected that by 2010 demand will expand, from 1994's 5.1 quadrillion Btu (quads) to 5.7 quads, even with continued improvements in appliance efficiency. That estimate, however, will depend on the industry-s utilities and whether they keep converting, proselytizing, persuading and influencing customers to use more natural gas

  12. Stochastic efficiency: five case studies

    International Nuclear Information System (INIS)

    Proesmans, Karel; Broeck, Christian Van den

    2015-01-01

    Stochastic efficiency is evaluated in five case studies: driven Brownian motion, effusion with a thermo-chemical and thermo-velocity gradient, a quantum dot and a model for information to work conversion. The salient features of stochastic efficiency, including the maximum of the large deviation function at the reversible efficiency, are reproduced. The approach to and extrapolation into the asymptotic time regime are documented. (paper)

  13. Stirling Engine Cycle Efficiency

    OpenAIRE

    Naddaf, Nasrollah

    2012-01-01

    ABSTRACT This study strives to provide a clear explanation of the Stirling engine and its efficiency using new automation technology and the Lab View software. This heat engine was invented by Stirling, a Scottish in 1918. The engine’s working principles are based on the laws of thermodynamics and ability of volume expansion of ideal gases at different temperatures. Basically there are three types of Stirling engines: the gamma, beta and alpha models. The commissioner of the thesis ...

  14. Energy efficient design

    International Nuclear Information System (INIS)

    1991-01-01

    Solar Applications and Energy Efficiency in Building Design and Town Planning (RER/87/006) is a United Nations Development Programme (UNDP) project of the Governments of Albania, Bulgaria, Cyprus, The Czech and Slovak Federal Republic, France, Hungary, Malta, Poland, Turkey, United Kingdom and Yugoslavia. The project began in 1988 and comes to a conclusion at the end of 1991. It is to enhance the professional skills of practicing architects, engineers and town planners in European countries to design energy efficient buildings which reduce energy consumption and make greater use of passive solar heating and natural cooling techniques. The United Nations Economic Commission for Europe (ECE) is the Executing Agency of the project which is implemented under the auspices of the Committee on Energy, General Energy Programme of Work for 1990-1994, sub-programme 5 Energy Conservation and Efficiency (ECE/ENERGY/15). The project has five main outputs or results: an international network of institutions for low energy building design; a state-of-the-art survey of energy use in the built environment of European IPF countries; a simple computer program for energy efficient building design; a design guide and computer program operators' manual; and a series of international training courses in participating European IPF countries. Energy Efficient Design is the fourth output of the project. It comprises the design guide for practicing architects and engineers, for use mainly in mid-career training courses, and the operators' manual for the project's computer program

  15. Mobility Work

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Bossen, Claus

    2005-01-01

    We posit the concept of Mobility Work to describe efforts of moving about people and things as part of accomplishing tasks. Mobility work can be seen as a spatial parallel to the concept of articulation work proposed by the sociologist Anselm Strauss. Articulation work describes efforts of coordi....../or resources. To accomplish their work, actors have to make the right configuration of these four aspects emerge.......We posit the concept of Mobility Work to describe efforts of moving about people and things as part of accomplishing tasks. Mobility work can be seen as a spatial parallel to the concept of articulation work proposed by the sociologist Anselm Strauss. Articulation work describes efforts...... of coordination necessary in cooperative work, but focuses, we argue, mainly on the temporal aspects of cooperative work. As a supplement, the concept of mobility work focuses on the spatial aspects of cooperative work. Whereas actors seek to diminish the amount of articulation work needed in collaboration...

  16. Without alternative. Oil-free piston compressor for foil production works with a half-load control system very efficiently; Ohne Alternative. Oelfreie Kolbenkompressoren fuer die Folienproduktion arbeiten mit Halblast-Steuerung sehr wirtschaftlich

    Energy Technology Data Exchange (ETDEWEB)

    Barlmeyer, N. [Buero fuer Kommunikation, Bielefeld (Germany)

    2003-09-29

    Oil-free piston compressors save in comparision to oil free screw compressors up to 20% of energy costs. The half-load control system enables a half conveyor rate without loss of efficiency. (GL) [German] Oelfrei verdichtende Kolbenkompressoren sparen im Vergleich zu oelfreien Schraubenverdichtern bis zu 20% an Energiekosten. Die Halblast-Steuerung ermoeglicht die halbe Liefermenge ohne Wirkungsgradverlust. (orig.)

  17. Energy efficiency; Energieffektivisering

    Energy Technology Data Exchange (ETDEWEB)

    2009-06-15

    The Low Energy Panel will halve the consumption in buildings. The Panel has proposed a halving of consumption in the construction within 2040 and 20 percent reduction in the consumption in the industry within 2020. The Panel consider it as possible to gradually reduce consumption in buildings from the current level of 80 TWh with 10 TWh in 2020, 25 TWh in 2030 and 40 TWh in 2040. According the committee one such halving can be reached by significant efforts relating to energy efficiency, by greater rehabilitations, energy efficiency in consisting building stock and stricter requirements for new construction. For the industry field the Panel recommend a political goal to be set at least 20 percent reduction in specific energy consumption in the industry and primary industry beyond general technological development by the end of 2020. This is equivalent to approximately 17 TWh based on current level of activity. The Panel believes that a 5 percent reduction should be achieved by the end of 2012 by carrying out simple measures. The Low Energy Panel has since March 2009 considered possibilities to strengthen the authorities' work with energy efficiency in Norway. The wide complex panel adds up proposals for a comprehensive approach for increased energy efficiency in particular in the building- and industry field. The Panel has looked into the potential for energy efficiency, barriers for energy efficiency, assessment of strengths and weaknesses in the existing policy instruments and members of the Panel's recommendations. In addition the report contains a review of theoretical principles for effects of instruments together with an extensive background. One of the committee members have chosen to take special notes on the main recommendations in the report. (AG)

  18. Options for Low Income Countries Effective and Efficient Use of Tax Incentives for Investment : A Report to the G-20 Development Working Group by the IMF, OECD, UN and World Bank

    OpenAIRE

    International Monetary Fund; OECD; United Nations; World Bank

    2015-01-01

    Experience shows that there is often ample room for more effective and efficient use of investment tax incentives in low-income countries. Tax incentives generally rank low in investment climate surveys in low-income countries, and there are many examples in which they are reported to be redundant, that is, investment will have been undertaken even without them. And their fiscal cost can b...

  19. Job and Work Design

    OpenAIRE

    Van den Broeck, Anja; Parker, Sharon K.

    2017-01-01

    Job design or work design refers to the content, structure, and organization of tasks and activities. It is mostly studied in terms of job characteristics, such as autonomy, workload, role problems, and feedback. Throughout history, job design has moved away from a sole focus on efficiency and productivity to more motivational job designs, including the social approach toward work, Herzberg’s two-factor model, Hackman and Oldham’s job characteristics model, the job demand control model of Kar...

  20. Redesigning Radiotherapy Quality Assurance: Opportunities to Develop an Efficient, Evidence-Based System to Support Clinical Trials—Report of the National Cancer Institute Work Group on Radiotherapy Quality Assurance

    International Nuclear Information System (INIS)

    Bekelman, Justin E.; Deye, James A.; Vikram, Bhadrasain; Bentzen, Soren M.; Bruner, Deborah; Curran, Walter J.; Dignam, James; Efstathiou, Jason A.; FitzGerald, T.J.; Hurkmans, Coen; Ibbott, Geoffrey S.; Lee, J. Jack; Merchant, Thomas E.; Michalski, Jeff; Palta, Jatinder R.; Simon, Richard; Ten Haken, Randal K.; Timmerman, Robert; Tunis, Sean; Coleman, C. Norman

    2012-01-01

    Purpose: In the context of national calls for reorganizing cancer clinical trials, the National Cancer Institute sponsored a 2-day workshop to examine challenges and opportunities for optimizing radiotherapy quality assurance (QA) in clinical trial design. Methods and Materials: Participants reviewed the current processes of clinical trial QA and noted the QA challenges presented by advanced technologies. The lessons learned from the radiotherapy QA programs of recent trials were discussed in detail. Four potential opportunities for optimizing radiotherapy QA were explored, including the use of normal tissue toxicity and tumor control metrics, biomarkers of radiation toxicity, new radiotherapy modalities such as proton beam therapy, and the international harmonization of clinical trial QA. Results: Four recommendations were made: (1) to develop a tiered (and more efficient) system for radiotherapy QA and tailor the intensity of QA to the clinical trial objectives (tiers include general credentialing, trial-specific credentialing, and individual case review); (2) to establish a case QA repository; (3) to develop an evidence base for clinical trial QA and introduce innovative prospective trial designs to evaluate radiotherapy QA in clinical trials; and (4) to explore the feasibility of consolidating clinical trial QA in the United States. Conclusion: Radiotherapy QA can affect clinical trial accrual, cost, outcomes, and generalizability. To achieve maximum benefit, QA programs must become more efficient and evidence-based.

  1. Redesigning Radiotherapy Quality Assurance: Opportunities to Develop an Efficient, Evidence-Based System to Support Clinical Trials-Report of the National Cancer Institute Work Group on Radiotherapy Quality Assurance

    Energy Technology Data Exchange (ETDEWEB)

    Bekelman, Justin E., E-mail: bekelman@uphs.upenn.edu [University of Pennsylvania, Philadelphia, Pennsylvania (United States); Deye, James A.; Vikram, Bhadrasain [National Cancer Institute, Bethesda, Maryland (United States); Bentzen, Soren M. [University of Wisconsin, Madison, Wisconsin (United States); Bruner, Deborah [University of Pennsylvania, Philadelphia, Pennsylvania (United States); Curran, Walter J. [Emory University, Atlanta, Georgia (United States); Dignam, James [University of Chicago, Chicago, Illinois (United States); Efstathiou, Jason A. [Massachusetts General Hospital, Boston, Massachusetts (United States); FitzGerald, T.J. [University of Massachusetts, Boston, Massachusetts (United States); Hurkmans, Coen [European Organization for Research and Treatment of Cancer, Brussels (Belgium); Ibbott, Geoffrey S.; Lee, J. Jack [University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Merchant, Thomas E. [St. Jude Children' s Research Hospital, Memphis, Tennessee (United States); Michalski, Jeff [University of Washington, St. Louis, Missouri (United States); Palta, Jatinder R. [University of Florida, Miami, Florida (United States); Simon, Richard [National Institutes of Health, Bethesda, Maryland (United States); Ten Haken, Randal K. [University of Michigan, Ann Arbor, Michigan (United States); Timmerman, Robert [University of Texas Southwestern Medical Center, Dallas, Texas (United States); Tunis, Sean [Center for Medical Technology Policy, Baltimore, Maryland (United States); Coleman, C. Norman [National Cancer Institute, Bethesda, Maryland (United States); and others

    2012-07-01

    Purpose: In the context of national calls for reorganizing cancer clinical trials, the National Cancer Institute sponsored a 2-day workshop to examine challenges and opportunities for optimizing radiotherapy quality assurance (QA) in clinical trial design. Methods and Materials: Participants reviewed the current processes of clinical trial QA and noted the QA challenges presented by advanced technologies. The lessons learned from the radiotherapy QA programs of recent trials were discussed in detail. Four potential opportunities for optimizing radiotherapy QA were explored, including the use of normal tissue toxicity and tumor control metrics, biomarkers of radiation toxicity, new radiotherapy modalities such as proton beam therapy, and the international harmonization of clinical trial QA. Results: Four recommendations were made: (1) to develop a tiered (and more efficient) system for radiotherapy QA and tailor the intensity of QA to the clinical trial objectives (tiers include general credentialing, trial-specific credentialing, and individual case review); (2) to establish a case QA repository; (3) to develop an evidence base for clinical trial QA and introduce innovative prospective trial designs to evaluate radiotherapy QA in clinical trials; and (4) to explore the feasibility of consolidating clinical trial QA in the United States. Conclusion: Radiotherapy QA can affect clinical trial accrual, cost, outcomes, and generalizability. To achieve maximum benefit, QA programs must become more efficient and evidence-based.

  2. Working alone.

    Science.gov (United States)

    Tearle, Paul

    2004-09-01

    Employees may be found working alone in a wide range of occupations. Technological advance, rationalisation and automation mean that more and more frequently. one single person is in charge of several machines, pieces of equipment or different work activities. Employees will be found working alone during work carried out as 'overtime', as part of flexible working hours, on Saturdays, Sundays, Bank Holidays and other statutory leave days, or in situations where their work takes them away from a fixed base (mobile workers). A person may be considered to be 'working alone' whenever it is not possible to offer immediate assistance following an accident or in another critical situation. This article looks at the legal background to lone working and what an employer must do to ensure lone workers are at no greater risk to their health and safety than any other members of the workforce.

  3. Energy efficiency: potentials and profits

    International Nuclear Information System (INIS)

    Sigaud, J.B.

    2011-01-01

    In this work, Jean-Marie Bouchereau (ADEME) has presented a review of the energy efficiency profits in France during the last 20 years and the prospects from now to 2020. Then, Geoffrey Woodward (TOTAL) and Sebastien Huchette (AXENS) have recalled the stakes involved in the energy efficiency of the upstream and downstream sectors respectively and presented examples of advances approaches illustrated by concrete cases of applications. (O.M.)

  4. Academic Work and Performativity

    Science.gov (United States)

    Kenny, John

    2017-01-01

    Neoliberal reforms in higher education have resulted in corporate managerial practices in universities and a drive for efficiency and productivity in teaching and research. As a result, there has been an intensification of academic work, increased stress for academics and an emphasis on accountability and performativity in universities. This paper…

  5. Online Literacies at Work.

    Science.gov (United States)

    Searle, Jean

    1999-01-01

    Uses examples drawn from research across several sites in tourism and hospitality in which employees are required to interact with technology, in order to highlight issues relating to new online literacies that are now required for efficient work practices and to discuss implications for practice. (Adjunct ERIC Clearinghouse for ESL Literacy…

  6. Direct Lending Works.

    Science.gov (United States)

    Riley, Richard W.

    1997-01-01

    In its third year, direct lending is working well for college students and administration. It is a simpler, faster, more efficient way of getting loan funds to students that cuts out financial middlemen. It helps students manage their finances better when repaying loans, promotes competition, stimulates program innovation, leads to greater…

  7. Work Overload.

    Science.gov (United States)

    Bateman, Thomas S.

    1980-01-01

    To investigate managerial use of work (or role) overload to increase productivity, the author studied 77 nonclerical white-collar employees and found that work overload had negative effects on productivity, supervisors' ratings, employee attitudes, job satisfaction, and health. He recommends ways for managers and employees to reduce work overload.…

  8. Developmental Work

    DEFF Research Database (Denmark)

    Møller, Niels; Hvid, Helge; Kristensen, Tage Søndergaard

    2003-01-01

    Human Deveoplment and Working Life - Work for Welfare explores whether the development of human resources at company level can improve individuals' quality of life, companies' possibilities of development, and welfare and democracy in society. Chapter two discuss the concept "developmental work...

  9. Energy efficiency standards and innovation

    Science.gov (United States)

    Morrison, Geoff

    2015-01-01

    Van Buskirk et al (2014 Environ. Res. Lett. 9 114010) demonstrate that the purchase price, lifecycle cost and price of improving efficiency (i.e. the incremental price of efficiency gain) decline at an accelerated rate following the adoption of the first energy efficiency standards for five consumer products. The authors show these trends using an experience curve framework (i.e. price/cost versus cumulative production). While the paper does not draw a causal link between standards and declining prices, they provide suggestive evidence using markets in the US and Europe. Below, I discuss the potential implications of the work.

  10. The nematode eukaryotic translation initiation factor 4E/G complex works with a trans-spliced leader stem-loop to enable efficient translation of trimethylguanosine-capped RNAs.

    Science.gov (United States)

    Wallace, Adam; Filbin, Megan E; Veo, Bethany; McFarland, Craig; Stepinski, Janusz; Jankowska-Anyszka, Marzena; Darzynkiewicz, Edward; Davis, Richard E

    2010-04-01

    Eukaryotic mRNA translation begins with recruitment of the 40S ribosome complex to the mRNA 5' end through the eIF4F initiation complex binding to the 5' m(7)G-mRNA cap. Spliced leader (SL) RNA trans splicing adds a trimethylguanosine (TMG) cap and a sequence, the SL, to the 5' end of mRNAs. Efficient translation of TMG-capped mRNAs in nematodes requires the SL sequence. Here we define a core set of nucleotides and a stem-loop within the 22-nucleotide nematode SL that stimulate translation of mRNAs with a TMG cap. The structure and core nucleotides are conserved in other nematode SLs and correspond to regions of SL1 required for early Caenorhabditis elegans development. These SL elements do not facilitate translation of m(7)G-capped RNAs in nematodes or TMG-capped mRNAs in mammalian or plant translation systems. Similar stem-loop structures in phylogenetically diverse SLs are predicted. We show that the nematode eukaryotic translation initiation factor 4E/G (eIF4E/G) complex enables efficient translation of the TMG-SL RNAs in diverse in vitro translation systems. TMG-capped mRNA translation is determined by eIF4E/G interaction with the cap and the SL RNA, although the SL does not increase the affinity of eIF4E/G for capped RNA. These results suggest that the mRNA 5' untranslated region (UTR) can play a positive and novel role in translation initiation through interaction with the eIF4E/G complex in nematodes and raise the issue of whether eIF4E/G-RNA interactions play a role in the translation of other eukaryotic mRNAs.

  11. The Nematode Eukaryotic Translation Initiation Factor 4E/G Complex Works with a trans-Spliced Leader Stem-Loop To Enable Efficient Translation of Trimethylguanosine-Capped RNAs ▿ †

    Science.gov (United States)

    Wallace, Adam; Filbin, Megan E.; Veo, Bethany; McFarland, Craig; Stepinski, Janusz; Jankowska-Anyszka, Marzena; Darzynkiewicz, Edward; Davis, Richard E.

    2010-01-01

    Eukaryotic mRNA translation begins with recruitment of the 40S ribosome complex to the mRNA 5′ end through the eIF4F initiation complex binding to the 5′ m7G-mRNA cap. Spliced leader (SL) RNA trans splicing adds a trimethylguanosine (TMG) cap and a sequence, the SL, to the 5′ end of mRNAs. Efficient translation of TMG-capped mRNAs in nematodes requires the SL sequence. Here we define a core set of nucleotides and a stem-loop within the 22-nucleotide nematode SL that stimulate translation of mRNAs with a TMG cap. The structure and core nucleotides are conserved in other nematode SLs and correspond to regions of SL1 required for early Caenorhabditis elegans development. These SL elements do not facilitate translation of m7G-capped RNAs in nematodes or TMG-capped mRNAs in mammalian or plant translation systems. Similar stem-loop structures in phylogenetically diverse SLs are predicted. We show that the nematode eukaryotic translation initiation factor 4E/G (eIF4E/G) complex enables efficient translation of the TMG-SL RNAs in diverse in vitro translation systems. TMG-capped mRNA translation is determined by eIF4E/G interaction with the cap and the SL RNA, although the SL does not increase the affinity of eIF4E/G for capped RNA. These results suggest that the mRNA 5′ untranslated region (UTR) can play a positive and novel role in translation initiation through interaction with the eIF4E/G complex in nematodes and raise the issue of whether eIF4E/G-RNA interactions play a role in the translation of other eukaryotic mRNAs. PMID:20154140

  12. Efeito da profundidade de trabalho das hastes sulcadoras de uma semeadora-adubadora na patinagem, na força de tração e no consumo de combustível de um trator agrícola Effects of work operation depth of shanks in a seeder-fertilizer on slip, traction force and fuel consumption of a tractor

    Directory of Open Access Journals (Sweden)

    Marcos Antonio Zambillo Palma

    2010-10-01

    are unnecessary. However, there are many problems regarding compaction of the surface layers of soils due to machinery traffic and crop-livestock integration. The solution found by the farmers is the change of the double disc on the seeders for the shanks, which operate deeper. Therefore, this work aimed to evaluate different operation depths of the shank, analyzing the fuel consumption, traction force, slip index, draw-bar leverage, specific consumption of fuel and the theoretical field capacity of a tractor pulling a seeder-fertilizer over a soil compacted due to crop-livestock integration. The treatments were composed of four depths of the shanks, which were placed operating 100, 150, 200 and 250 mm deep. The experiments were carried out in randomized blocks design with four treatments and three repetitions at the Engineering Department of the Federal University of Lavras. The results showed that the increasing of operation depth of the shanks in a compacted soil increases the fuel consumption, the slip index and the leverage on the draw-bar. But when the shanks operated 50 mm beyond the most compacted layer, the traction force and the slip index have decreased, increasing the theoretical field capacity.

  13. High-efficiency CARM

    Energy Technology Data Exchange (ETDEWEB)

    Bratman, V.L.; Kol`chugin, B.D.; Samsonov, S.V.; Volkov, A.B. [Institute of Applied Physics, Nizhny Novgorod (Russian Federation)

    1995-12-31

    The Cyclotron Autoresonance Maser (CARM) is a well-known variety of FEMs. Unlike the ubitron in which electrons move in a periodical undulator field, in the CARM the particles move along helical trajectories in a uniform magnetic field. Since it is much simpler to generate strong homogeneous magnetic fields than periodical ones for a relatively low electron energy ({Brit_pounds}{le}1-3 MeV) the period of particles` trajectories in the CARM can be sufficiently smaller than in the undulator in which, moreover, the field decreases rapidly in the transverse direction. In spite of this evident advantage, the number of papers on CARM is an order less than on ubitron, which is apparently caused by the low (not more than 10 %) CARM efficiency in experiments. At the same time, ubitrons operating in two rather complicated regimes-trapping and adiabatic deceleration of particles and combined undulator and reversed guiding fields - yielded efficiencies of 34 % and 27 %, respectively. The aim of this work is to demonstrate that high efficiency can be reached even for a simplest version of the CARM. In order to reduce sensitivity to an axial velocity spread of particles, a short interaction length where electrons underwent only 4-5 cyclotron oscillations was used in this work. Like experiments, a narrow anode outlet of a field-emission electron gun cut out the {open_quotes}most rectilinear{close_quotes} near-axis part of the electron beam. Additionally, magnetic field of a small correcting coil compensated spurious electron oscillations pumped by the anode aperture. A kicker in the form of a sloping to the axis frame with current provided a control value of rotary velocity at a small additional velocity spread. A simple cavity consisting of a cylindrical waveguide section restricted by a cut-off waveguide on the cathode side and by a Bragg reflector on the collector side was used as the CARM-oscillator microwave system.

  14. Energy Efficiency Project Development

    Energy Technology Data Exchange (ETDEWEB)

    IUEP

    2004-03-01

    The International Utility Efficiency Partnerships, Inc. (IUEP) has been a leader among the industry groups that have supported voluntary initiatives to promote international energy efficiency projects and address global climate change. The IUEP maintains its leadership by both supporting international greenhouse gas (GHG) reduction projects under the auspices of the U.S. Department of Energy (DOE) and by partnering with U.S. and international organizations to develop and implement strategies and specific energy efficiency projects. The goals of the IUEP program are to (1) provide a way for U.S. industry to maintain a leadership role in international energy efficiency infrastructure projects; (2) identify international energy project development opportunities to continue its leadership in supporting voluntary market-based mechanisms to reduce GHG emissions; and (3) demonstrate private sector commitment to voluntary approaches to global climate issues. The IUEP is dedicated to identifying, promoting, managing, and assisting in the registration of international energy efficiency projects that result in demonstrated voluntary reductions of GHG emissions. This Final Technical Report summarizes the IUEP's work in identifying, promoting, managing, and assisting in development of these projects and IUEP's effort in creating international cooperative partnerships to support project development activities that develop and deploy technologies that (1) increase efficiency in the production, delivery and use of energy; (2) increase the use of cleaner, low-carbon fuels in processing products; and (3) capture/sequester carbon gases from energy systems. Through international cooperative efforts, the IUEP intends to strengthen partnerships for energy technology innovation and demonstration projects capable of providing cleaner energy in a cost-effective manner. As detailed in this report, the IUEP met program objectives and goals during the reporting period January 1

  15. Power-efficient computer architectures recent advances

    CERN Document Server

    Själander, Magnus; Kaxiras, Stefanos

    2014-01-01

    As Moore's Law and Dennard scaling trends have slowed, the challenges of building high-performance computer architectures while maintaining acceptable power efficiency levels have heightened. Over the past ten years, architecture techniques for power efficiency have shifted from primarily focusing on module-level efficiencies, toward more holistic design styles based on parallelism and heterogeneity. This work highlights and synthesizes recent techniques and trends in power-efficient computer architecture.Table of Contents: Introduction / Voltage and Frequency Management / Heterogeneity and Sp

  16. Performative Work

    DEFF Research Database (Denmark)

    Beunza, Daniel; Ferraro, Fabrizio

    2018-01-01

    by attending to the normative and regulative associations of the device. We theorize this route to performativity by proposing the concept of performative work, which designates the necessary institutional work to enable translation and the subsequent adoption of the device. We conclude by considering...... the implications of performative work for the performativity and the institutional work literatures.......Callon’s performativity thesis has illuminated how economic theories and calculative devices shape markets, but has been challenged for its neglect of the organizational, institutional and political context. Our seven-year qualitative study of a large financial data company found that the company...

  17. Evaluación de la eficiencia de la vacunación antigripal en la población laboral española Efficiency of influenza vaccination in the working population in Spain

    Directory of Open Access Journals (Sweden)

    José Ramón de Juanes

    2006-03-01

    influenza vaccination program in the Spanish working population. Methods: A theoretical model of costs and benefits in terms of productivity savings was developed to compare 2 strategies (vaccination and non-vaccination in 2 cohorts of 1,000 workers each. The time horizon was 1 year and the study's perspective was societal. Main outcome measures: epidemiological and clinical data on the incidence of influenza and the effectiveness of the vaccine. Data on the use of direct and indirect resources were obtained from an expert panel of 5 experts in preventive medicine, microbiology, occupational health, and health economics. Unit costs (euros 2003 were extracted from local databases. A sensitivity analysis was performed with the data on incidence, effectiveness, and work absenteeism due to influenza. Results: In the base case scenario, influenza vaccine saved 35 Euros per worker, of which 88% were savings in work loss days avoided. Threshold values in the sensitivity analysis were 6% for the incidence of influenza and 1.5 days for absence from work, above which the vaccine leads to net savings. Conclusions: Influenza vaccination in the Spanish working population might result in net resource savings to society at large.

  18. Group Work

    Science.gov (United States)

    Wilson, Kristy J.; Brickman, Peggy; Brame, Cynthia J.

    2018-01-01

    Science, technology, engineering, and mathematics faculty are increasingly incorporating both formal and informal group work in their courses. Implementing group work can be improved by an understanding of the extensive body of educational research studies on this topic. This essay describes an online, evidence-based teaching guide published by…

  19. New highly efficient piezoceramic materials

    International Nuclear Information System (INIS)

    Dantsiger, A.Ya.; Razumovskaya, O.N.; Reznichenko, L.A.; Grineva, L.D.; Devlikanova, R.U.; Dudkina, S.I.; Gavrilyachenko, S.V.; Dergunova, N.V.

    1993-01-01

    New high efficient piezoceramic materials with various combination of parameters inclusing high Curie point for high-temperature transducers using in atomic power engineering are worked. They can be used in systems for heated matters nondestructive testing, controllers for varied industrial power plants and other high-temperature equipment

  20. Efficient GPS Position Determination Algorithms

    National Research Council Canada - National Science Library

    Nguyen, Thao Q

    2007-01-01

    ... differential GPS algorithm for a network of users. The stand-alone user GPS algorithm is a direct, closed-form, and efficient new position determination algorithm that exploits the closed-form solution of the GPS trilateration equations and works...

  1. [Wet work].

    Science.gov (United States)

    Kieć-Swierczyńska, Marta; Chomiczewska, Dorota; Krecisz, Beata

    2010-01-01

    Wet work is one of the most important risk factors of occupational skin diseases. Exposure of hands to the wet environment for more than 2 hours daily, wearing moisture-proof protective gloves for a corresponding period of time or necessity to wash hands frequently lead to the disruption of epidermal stratum corneum, damage to skin barrier function and induction of irritant contact dermatitis. It may also promote penetration of allergens into the skin and increase the risk of sensitization to occupational allergens. Exposure to wet work plays a significant role in occupations, such as hairdressers and barbers, nurses and other health care workers, cleaning staff, food handlers and metalworkers. It is more common among women because many occupations involving wet work are female-dominated. The incidence of wet-work-induced occupational skin diseases can be reduced by taking appropriate preventive measures. These include identification of high-risk groups, education of workers, organization of work enabling to minimize the exposure to wet work, use of personal protective equipment and skin care after work.

  2. Work extraction from quantum systems with bounded fluctuations in work

    Science.gov (United States)

    Richens, Jonathan G.; Masanes, Lluis

    2016-11-01

    In the standard framework of thermodynamics, work is a random variable whose average is bounded by the change in free energy of the system. This average work is calculated without regard for the size of its fluctuations. Here we show that for some processes, such as reversible cooling, the fluctuations in work diverge. Realistic thermal machines may be unable to cope with arbitrarily large fluctuations. Hence, it is important to understand how thermodynamic efficiency rates are modified by bounding fluctuations. We quantify the work content and work of formation of arbitrary finite dimensional quantum states when the fluctuations in work are bounded by a given amount c. By varying c we interpolate between the standard and minimum free energies. We derive fundamental trade-offs between the magnitude of work and its fluctuations. As one application of these results, we derive the corrected Carnot efficiency of a qubit heat engine with bounded fluctuations.

  3. Work Stress

    OpenAIRE

    Roeters, Anne

    2014-01-01

    Most of us agree that stress is a growing problem within organizations. We hear about the postal workers who had killed fellow employees and supervisors, and then hear that a major cause of tension is at work. Friends tell us that they are stressed due to increased workload and he has to work overtime because the company is restructured. We read the polls that employees complain about the stress in trying to balance family life with the work. Stress is a dynamic condition in which an individu...

  4. Working Collaboratively

    DEFF Research Database (Denmark)

    Holder, Anna; Lovett, George

    2009-01-01

    identified as a transformative global force of the last decade, most notably in knowledge and information publishing, communication and creation. This paper presents a structured conversation on changing understandings of collaboration, and the realities of collaborative methodology in architectural work...

  5. Working Mothers

    Science.gov (United States)

    ... work is unpleasant and damages instead of builds self-esteem. Family relationships may suffer if both parents want ... with your child, especially if he is very young. You may worry that you will miss some ...

  6. Working hot

    International Nuclear Information System (INIS)

    Stix, G.

    1988-01-01

    The author says ''barehand'' methods, where specially trained utility workers are called in conductive suits to equalize voltage over their bodies, to maintain high-voltage transmission lines are on the rise. Utilities are building lines at higher voltages and selling more power to other utilities, making it highly inconvenient to take the lines out of service. However, some unions view the barehand work with less than enthusiasm. Touching lines energized at hundreds of thousands of volts demands flawless equipment and rigid work procedures followed to the letter. Some local unions contend that adequate safety procedures and training, and appropriate penalties for workplace negligence, should be in place before utilities may do barehand work. The author discusses some of the methods of barehand work and the equipment used, i.e. steel-mesh lineman's suit, bucket truck's boom, helicopters, and robots

  7. Figuration work

    DEFF Research Database (Denmark)

    Nielsen, Gritt B.

    negotiations over student participation — influenced by demands for efficiency, flexibility, and student-centered education — reflect wider concerns about democracy and citizen participation in increasingly neoliberalised states. Combining anthropological and historical research, the author develops a novel...... approach to studying policy processes and opens a timely discussion to reflect on and question the kinds of future citizens who will emerge from current reforms....

  8. Work and Inertial Frames

    Science.gov (United States)

    Kaufman, Richard

    2017-12-01

    A fairly recent paper resolves a large discrepancy in the internal energy utilized to fire a cannon as calculated by two inertial observers. Earth and its small reaction velocity must be considered in the system so that the change in kinetic energy is calculated correctly. This paper uses a car in a similar scenario, but considers the work done by forces acting over distances. An analysis of the system must include all energy interactions, including the work done on the car and especially the (negative) work done on Earth in a moving reference frame. This shows the importance of considering the force on Earth and the distance Earth travels. For calculation of work in inertial reference frames, the center of mass perspective is shown to be useful. We also consider the energy requirements to efficiently accelerate a mass among interacting masses.

  9. An efficient nonlinear Feshbach engine

    Science.gov (United States)

    Li, Jing; Fogarty, Thomás; Campbell, Steve; Chen, Xi; Busch, Thomas

    2018-01-01

    We investigate a thermodynamic cycle using a Bose-Einstein condensate (BEC) with nonlinear interactions as the working medium. Exploiting Feshbach resonances to change the interaction strength of the BEC allows us to produce work by expanding and compressing the gas. To ensure a large power output from this engine these strokes must be performed on a short timescale, however such non-adiabatic strokes can create irreversible work which degrades the engine’s efficiency. To combat this, we design a shortcut to adiabaticity which can achieve an adiabatic-like evolution within a finite time, therefore significantly reducing the out-of-equilibrium excitations in the BEC. We investigate the effect of the shortcut to adiabaticity on the efficiency and power output of the engine and show that the tunable nonlinearity strength, modulated by Feshbach resonances, serves as a useful tool to enhance the system’s performance.

  10. Wide-web working

    Energy Technology Data Exchange (ETDEWEB)

    Hunter, J R

    1978-03-01

    This paper discusses the need to improve coalface performance and the all-round benefits that are to be gained by the use of improved systems with better engineering designs. These incorporate the use of stronger, better supports together with more robust and reliable equipment operating in wider working widths. Outlines the progress made over recent years in the Staffordshire Coalfield of the Western Area in seeking evolutionary solutions to coalface mechanization problems that involve efficiency, coalface risks and working conditions, together with some future proposals.

  11. Is working memory still working?

    Science.gov (United States)

    Baddeley, A D

    2001-11-01

    The current state of A. D. Baddeley and G. J. Hitch's (1974) multicomponent working memory model is reviewed. The phonological and visuospatial subsystems have been extensively investigated, leading both to challenges over interpretation of individual phenomena and to more detailed attempts to model the processes underlying the subsystems. Analysis of the controlling central executive has proved more challenging, leading to a proposed clarification in which the executive is assumed to be a limited capacity attentional system, aided by a newly postulated fourth system, the episodic buffer. Current interest focuses most strongly on the link between working memory and long-term memory and on the processes allowing the integration of information from the component subsystems. The model has proved valuable in accounting for data from a wide range of participant groups under a rich array of task conditions. Working memory does still appear to be working.

  12. Paid work and unpaid work

    DEFF Research Database (Denmark)

    Bonke, Jens

    Time-use information is preferably obtained from diaries, as this method is considered more reliable than information from questionnaires. The diary-technique seems to be unique in catching the rhythm of every day life and thereby the structuring of work and leisure during a well-defined and memo......Time-use information is preferably obtained from diaries, as this method is considered more reliable than information from questionnaires. The diary-technique seems to be unique in catching the rhythm of every day life and thereby the structuring of work and leisure during a well......-questions are asked about the time spent on paid work and unpaid/household work. The advantage of the latter technique is that it can easily be integrated into surveys. Thus the American National Survey of Families and Households (NSFH) already contains two waves, and a new wave for 2001-2002, which allows...

  13. Working hours

    OpenAIRE

    Fialová, Lenka

    2012-01-01

    Working hours The aim of this thesis that I set was a comprehensive analysis of the working hours issue. The main purpose was to summarize this area of labor law while taking into account the Labour Code amendment which came into force on 1st January 2012. The changes in the related legal terms were also included into this thesis because of the mentioned changes. The thesis is composed of three chapters. Chapter One deals briefly with history of Labour Law and regulatory development. Author`s...

  14. Motivational Issues in Knowledge Work

    Directory of Open Access Journals (Sweden)

    Anca BOGDAN

    2008-01-01

    Full Text Available The paper discusses the place of emotions in modern theories of motivation, and the influence of the knowledge-oriented paradigm on redefining motivation and rethinking ways of rendering work, knowledge work, in particular, more efficient, in a society in which human participation and deployment of intellectual capital become key factors of success, replacing traditional, tangible-focused, factors of production.

  15. Construction work

    CERN Multimedia

    2004-01-01

    Construction work on building 179 will start on the 16th February 2004 and continue until November 2004. The road between buildings 179 and 158 will temporarily become a one way street from Route Democrite towards building 7. The parking places between buildings 179 and 7 will become obsolete. The ISOLDE collaboration would like to apologize for any inconveniences.

  16. Wetlands Work

    Science.gov (United States)

    Messina, Linda; Blanchard, Pamela Borne

    2004-01-01

    This article describes how a biology teacher's search for a cross-curricular project in science, math, history, and environmental science, that would help her students connect what they were learning in the classroom to their everyday life, resulted in an ongoing stewardship project. Working together with the Louisiana Sea Grant College Program…

  17. Work notice

    CERN Multimedia

    TS-FM

    2005-01-01

    Please note that work to repair the water mains on Route Bloch near Gate C will be carried out between 12 and 30 September 2005. The area between Route Bakker and Gate C will be closed to traffic during this period. You are kindly requested to comply with the road signs in place. Thank you for your understanding. TS-FM Group

  18. Road works

    CERN Multimedia

    GS Department

    2010-01-01

    From Monday 11 October until Friday 29 October 2010, the flow of traffic will be disrupted by road works at the roundabout in front of Restaurant No. 2; The number of spaces available in the car park in front of Rest. No. 2 will be reduced. Thank you for your understanding during this period. GS/SEM Group

  19. Heart Work

    Science.gov (United States)

    Madden, Sandra R.; Gonzales, Alicia C.

    2017-01-01

    It is not every day that a former student greets a teacher with, "Your course changed my life." The authors are the professor and student of the transformative course. Alicia Gonzales wanted to understand how to work with students to co-construct an environment where persistent problem solving in a technologically rich classroom was the…

  20. Work Simplification

    Science.gov (United States)

    Ross, Lynne

    1970-01-01

    Excerpts from a talk by Mrs. Ross at the 23rd annual convention of the American School Food Service Association in Detroit, August 5, 1969. A book on work simplification by Mrs. Ross will be available in June from the Iowa State University Press, Ames, Iowa. (Editor)

  1. Transformer Efficiency Assessment - Okinawa, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Thomas L. Baldwin; Robert J. Turk; Kurt S. Myers; Jake P. Gentle; Jason W. Bush

    2012-08-01

    The US Army Engineering & Support Center, Huntsville (USAESCH), and the US Marine Corps Base (MCB), Okinawa, Japan retained Idaho National Laboratory (INL) to conduct a Transformer Efficiency Assessment of “key” transformers located at multiple military bases in Okinawa, Japan. The purpose of this assessment is to support the Marine Corps Base, Okinawa in evaluating medium voltage distribution transformers for potential efficiency upgrades. The original scope of work included the MCB providing actual transformer nameplate data, manufacturer’s factory test sheets, electrical system data (kWh), demand data (kWd), power factor data, and electricity cost data. Unfortunately, the MCB’s actual data is not available and therefore making it necessary to de-scope the original assessment. Note: Any similar nameplate data, photos of similar transformer nameplates, and basic electrical details from one-line drawings (provided by MCB) are not a replacement for actual load loss test data. It is recommended that load measurements are performed on the high and low sides of transformers to better quantify actual load losses, demand data, and power factor data. We also recommend that actual data, when available, be inserted by MCB Okinawa where assumptions have been made and then the LCC analysis updated. This report covers a generalized assessment of modern U.S. transformers in a three level efficiency category, Low-Level efficiency, Medium-Level efficiency, and High-Level efficiency.

  2. Transformer Efficiency Assessment - Okinawa, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Thomas L. Baldwin; Robert J. Turk; Kurt S. Myers; Jake P. Gentle; Jason W. Bush

    2012-05-01

    The US Army Engineering & Support Center, Huntsville (USAESCH), and the US Marine Corps Base (MCB), Okinawa, Japan retained Idaho National Laboratory (INL) to conduct a Transformer Efficiency Assessment of “key” transformers located at multiple military bases in Okinawa, Japan. The purpose of this assessment is to support the Marine Corps Base, Okinawa in evaluating medium voltage distribution transformers for potential efficiency upgrades. The original scope of work included the MCB providing actual transformer nameplate data, manufacturer’s factory test sheets, electrical system data (kWh), demand data (kWd), power factor data, and electricity cost data. Unfortunately, the MCB’s actual data is not available and therefore making it necessary to de-scope the original assessment. Note: Any similar nameplate data, photos of similar transformer nameplates, and basic electrical details from one-line drawings (provided by MCB) are not a replacement for actual load loss test data. It is recommended that load measurements are performed on the high and low sides of transformers to better quantify actual load losses, demand data, and power factor data. We also recommend that actual data, when available, be inserted by MCB Okinawa where assumptions have been made and then the LCC analysis updated. This report covers a generalized assessment of modern U.S. transformers in a three level efficiency category, Low-Level efficiency, Medium-Level efficiency, and High-Level efficiency.

  3. Work and minor work contracts

    CERN Document Server

    1999-01-01

    The Work and Minor Work contracts are all of the result-oriented type. The work is specified by CERN and the contractor is given full responsibility for its performance. The contracts are thus very similar to supply contracts. The re-tendering of the existing contracts is almost complete, except for some building maintenance contracts. A new cycle of re-tendering for some activities will be launched in the next twelve months. The total estimated expenditure in the year 2000 for the contracts referred to in this document is 27 750 000 Swiss francs at 1999 prices. The Finance Committee is invited: - to approve the proposed expenditure for the extension of contracts for which the estimated amount for the year 2000 exceeds 750 000 Swiss francs, namely those under references 1, 2, 3, 5, 7, 8, 9 and 23, highlighted in Table I; - to take note that all Work and Minor Work contracts have been tendered since 1 January 1994, except the small contracts shown under references 12 and 16 in Table I; - to take note that the ...

  4. Sedentary work

    DEFF Research Database (Denmark)

    Eriksen, Dorte; Rosthøj, Susanne; Burr, Hermann

    2015-01-01

    OBJECTIVE: The aim of this study is to investigate the association between five-year changes in occupational sitting and body mass index (BMI) in working adults. METHODS: We analyzed data from The Danish Work Environment Cohort Study (2005 and 2010, n=3.482). Data on occupational sitting, weight......, height and several potential confounders were self-reported. The association between change in occupational sitting (hours) (categorized as large decrease 2.5 to 7.5 and large increase >7.5) and change in BMI was explored...... by multiple linear regression analyses. RESULTS: 43.0% men and 36.1% women had high occupational sitting time (≥25h per week) at baseline. 31.8% men and 27.2% women decreased while 30.0% men and 33.0% women increased occupational sitting. The proportion of obese (BMI≥30) increased almost 3% for both genders...

  5. Efficiency bounds for nonequilibrium heat engines

    International Nuclear Information System (INIS)

    Mehta, Pankaj; Polkovnikov, Anatoli

    2013-01-01

    We analyze the efficiency of thermal engines (either quantum or classical) working with a single heat reservoir like an atmosphere. The engine first gets an energy intake, which can be done in an arbitrary nonequilibrium way e.g. combustion of fuel. Then the engine performs the work and returns to the initial state. We distinguish two general classes of engines where the working body first equilibrates within itself and then performs the work (ergodic engine) or when it performs the work before equilibrating (non-ergodic engine). We show that in both cases the second law of thermodynamics limits their efficiency. For ergodic engines we find a rigorous upper bound for the efficiency, which is strictly smaller than the equivalent Carnot efficiency. I.e. the Carnot efficiency can be never achieved in single reservoir heat engines. For non-ergodic engines the efficiency can be higher and can exceed the equilibrium Carnot bound. By extending the fundamental thermodynamic relation to nonequilibrium processes, we find a rigorous thermodynamic bound for the efficiency of both ergodic and non-ergodic engines and show that it is given by the relative entropy of the nonequilibrium and initial equilibrium distributions. These results suggest a new general strategy for designing more efficient engines. We illustrate our ideas by using simple examples. -- Highlights: ► Derived efficiency bounds for heat engines working with a single reservoir. ► Analyzed both ergodic and non-ergodic engines. ► Showed that non-ergodic engines can be more efficient. ► Extended fundamental thermodynamic relation to arbitrary nonequilibrium processes

  6. Works notice

    CERN Multimedia

    GS Department

    2009-01-01

    We would like to inform you that renovation work on the road lighting equipment will take place on the Meyrin site between 19 October and 18 December 2009. During this period, traffic will be disrupted on the Schrödinger, Perrin and Siegbahn roads, ie from Building 274 to Building 188. We request that you comply with the road signs and thank you for your understanding. GS-SEM Group

  7. Southwest Energy Efficiency Project (SWEEP) Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Geller, Howard [Southwest Energy Efficiency Project (SWEEP), Boulder, CO (United States); Meyers, Jim [Southwest Energy Efficiency Project (SWEEP), Boulder, CO (United States)

    2018-01-29

    SWEEP worked with Energy Efficiency and Renewable Energy (EERE) programs to foster greater energy efficiency throughout the Southwest. SWEEP accomplished this through a combination of analysis and support; preparation and distribution of materials on best practice technologies, policies and programs; and technical assistance and information dissemination to states and municipalities in the southwest supporting BTO, AMO, OWIP for advancement of efficiency in products and practices. These efforts were accomplished during the period 2012 through 2017.

  8. Efficiency of contactors

    International Nuclear Information System (INIS)

    Orth, D.A.; Graham, F.R.; Holt, D.L.

    1986-01-01

    The Savannah River Plant has two separations plants that began Purex operations in 1954 and 1955 with pump-mix mixer-settlers as contactors to process nuclear fuels. The only changes to the extraction equipment were replacement of most of the mixer-settlers in one plant with larger units in 1959, and the further replacement of the large 1A bank with a bank of rapid-contact centrifugal contactors in 1966. Improved performance of the old units has become highly desirable, and an experimental program is underway. Good contact between the phases, and adequate settling without entrainment of the opposite phase are required for high efficiency operation of the mixer-settlers. Factors that determine efficiency are mixer design, drop size generated, and phase coalescence properties. The original development work and accumulated plant data confirm that the tip speed of a given impeller design determines the throughput capacity and extraction performance. An experimental unit with three full-scale stages has been constructed and is being utilized to test different impeller designs; reduced pumping and better mixing with lower speeds appear to be the key factors for improvement. Decontamination performance of the rapid-contact centrifugal contactors is limited by the number of scrub contacts and the time of contact because of slowly equilibrating fission product species. Where solvent degradation is not a factor, the longer scrub contact of mixer-settlers gives better decontamination than the centrifugals. This kinetic effect can be overcome with long scrub contacts that follow the initial short extraction and short scrub contacts in the centrifugal contactors. A hybrid experimental unit with both rapid contact sections and longer contact scrub sections is under development to establish the degree of improvement that might be attained

  9. Industrial energy efficiency: A policy perspective

    International Nuclear Information System (INIS)

    Chandler, W.U.

    1990-01-01

    Policies that promote energy efficiency can work; but potential energy savings are unlikely to be realized without effective policy leadership. This article discusses the opportunities in several countries for increasing energy efficiency. Both ''open'' and centrally planned economies could be much more energy efficient. In the United States, for example, the government needs to stimulate energy efficiency. This could be done by sponsoring research to develop new processes, creating favourable financial conditions for investment in efficiency, and making the advantages of energy efficiency technologies better known. International collaboration in sponsoring research and transfer technologies could be of the greatest importance in improving energy efficiency in countries with centrally planned economies, including the Soviet Union, as well as in developing countries. Favourable conditions for achieving both economic development and environmental protection can be created through cooperation on the international level. (author). 24 refs, 4 tabs

  10. Working together

    Energy Technology Data Exchange (ETDEWEB)

    1957-01-01

    The film summarizes international cooperation in advancing peaceful applications of atomic energy. It describes: U.S. shipments abroad of radioisotopes; formation of the European Council for Nuclear Research; former president Dwight D. Eisenhower's 'Atoms for Peace' announcement to the UN; first International Conference at the University of Michigan; first shipment abroad by AEC Libraries; UN General Assembly debate on the international agency; the Joint Norwegian-Dutch Atomic Energy Laboratory; atomic energy work of India, Brazil and others; U.S. training of foreign scientists; U.S. agreements with other nations; Geneva 1955 International Conference; approval and signing of the Charter of the International Atomic Energy Agency

  11. Working together

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1958-12-31

    The film summarizes international cooperation in advancing peaceful applications of atomic energy. It describes: U.S. shipments abroad of radioisotopes; formation of the European Council for Nuclear Research; former president Dwight D. Eisenhower`s `Atoms for Peace` announcement to the UN; first International Conference at the University of Michigan; first shipment abroad by AEC Libraries; UN General Assembly debate on the international agency; the Joint Norwegian-Dutch Atomic Energy Laboratory; atomic energy work of India, Brazil and others; U.S. training of foreign scientists; U.S. agreements with other nations; Geneva 1955 International Conference; approval and signing of the Charter of the International Atomic Energy Agency

  12. Lice work

    DEFF Research Database (Denmark)

    Benali, Amira; Ren, Carina Bregnholm

    2018-01-01

    and Nepalese everyday life and show how these are deployed, contested and reconfigured onsite by volunteer tourism actors. By exploring patterns of absences and presences and using the concept of ontological choreography as an analytical resource, we show how the situated lice work of human and non...... at the orphanage. This post-human approach decenters the volunteer and destabilises the host and guest binary, while adding to our understanding of tourism practices as complex and materially distributed endeavours. We first analyse two configurations of head lice enacted through a Western morality of hygiene...

  13. RESUMING WORK

    CERN Document Server

    2004-01-01

    In application of the Staff Rules and Regulations, every member of the CERN personnel is required to undergo a medical examination on resuming work after sick leave: • if the medical absence has been for 21 calendar days or longer • if absent more than 48 hours due to professional accident It is incumbent upon the member of the personnel himself/herself to contact the Medical Service tel. 73186, without awaiting its summons. The purpose of this exam is not to check on the absenteeism, but to support the professional reinsertion. Medical Service

  14. RESUMING WORK

    CERN Document Server

    2003-01-01

    In application of the Staff Rules and Regulations, every member of the CERN personnel is required to undergo a medical examination on resuming work after sick leave: - if the medical absence has been for 21 calendar days or longer - if absent more than 48 hours due to professional accident It is incumbent upon the member of the personnel himself/herself to contact the Medical Service Tel. 73186, without awaiting its summons. The purpose of this exam is not to check on the absenteeism, but to support the professional reinsertion. Medical Service

  15. RESUMING WORK

    CERN Multimedia

    2003-01-01

    In application of the Staff Rules and Regulations, every member of the CERN personnel is required to undergo a medical examination on resuming work after sick leave: - if the medical absence has been for 21 calendar days or longer - if absent more than 48 hours due to professional accident It is incumbent upon the member of the personnel himself/herself to contact the Medical Service tel. 73186, without awaiting its summons. The purpose of this exam is not to check on the absenteeism, but to support the professional reinsertion. Medical Service

  16. Exact work

    International Nuclear Information System (INIS)

    Zeger, J.

    1993-01-01

    Organized criminals also tried to illegally transfer nuclear material through Austria. Two important questions have to be answered after the material is sized by police authorities: What is the composition of the material and where does it come from? By application of a broad range of analytical techniques, which were developed or refined by our experts, it is possible to measure the exact amount and isotopic composition of uranium and plutonium in any kind of samples. The criminalistic application is only a byproduct of the large scale work on controlling the peaceful application of nuclear energy, which is done in contract with the IAEA in the context of the 'Network of Analytical Laboratories'

  17. 重大融资、经营性营运资金管理效率与企业绩效来自中国上市公司的经验证据%Significant Financing,Efficiency of Operational Working Capital Management and Corporate Performance Evidence from China's Listed Companies

    Institute of Scientific and Technical Information of China (English)

    曹玉珊

    2015-01-01

    将重大融资行为的影响纳入考虑,重新对经营性营运资金管理效率与企业绩效的关系加以探讨,选取沪深两市2004~2012年数据为样本,研究发现:在正常经营状况下,中国上市公司经营性营运资金管理效率与企业绩效之间呈显著正相关关系;而重大融资行为下,二者关系则并不显著。此外,检验结果还显示:重大融资行为本身与企业绩效呈负相关关系;重大融资行为可能会促使经营性营运资金管理效率显著下降。这些可能是导致重大融资行为下经营性营运资金管理效率与企业绩效之间不相关的主要原因。%Based on samples from China's listed companies (2004-2012),this paper investiga-ted the relationship between efficiency of operational working capital management and corporate performance when taking significant financing in account.It could be found that:without signifi-cant financing,there was a certain positive correlation between efficiency of operational working capital management and China's corporate performance;however,the correlation disappeared when significant financing occurred.In addition,the output showed:significant financing was significantly negative to corporate performance and led to the decline of efficiency of operational working capital management.These may be the main cause of the correlation lost.

  18. An international nomenclature for forest work study

    Science.gov (United States)

    Rolf Björheden; Michael A.  Thompson

    2000-01-01

    Knowledge gained in the study of forest work is used to improve operational efficiency through better planning and control of future work. Internationally recognized standard methods for recording, evaluating and reporting performance in forest work will greatly enhance the usefulness of this information to managers and planners. A subcommittee of IUFRO Working Party $...

  19. Reconsidering energy efficiency

    International Nuclear Information System (INIS)

    Goldoni, Giovanni

    2007-01-01

    Energy and environmental policies are reconsidering energy efficiency. In a perfect market, rational and well informed consumers reach economic efficiency which, at the given prices of energy and capital, corresponds to physical efficiency. In the real world, market failures and cognitive frictions distort the consumers from perfectly rational and informed choices. Green incentive schemes aim at balancing market failures and directing consumers toward more efficient goods and services. The problem is to fine tune the incentive schemes [it

  20. Mobilising Investment in Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Taxes, loans and grants, trading schemes and white certificates, public procurement and investment in R&D or infrastructure: known collectively as 'economic instruments', these tools can be powerful means of mobilising the finances needed to achieve policy goals by implementing energy efficiency measures. The role of economic instruments is to kick-start the private financial markets and to motivate private investors to fund EE measures. They should reinforce and promote energy performance regulations. This IEA analysis addresses the fact that, to date, relatively little effort has been directed toward evaluating how well economic instruments work. Using the buildings sector to illustrate how such measures can support energy efficiency, this paper can help policy makers better select and design economic instruments appropriate to their policy objectives and national contexts. This report’s three main aims are to: 1) Examine how economic instruments are currently used in energy efficiency policy; 2) Consider how economic instruments can be more effective and efficient in supporting low-energy buildings; and 3) Assess how economic instruments should be funded, where public outlay is needed. Detailed case studies in this report assess examples of economic instruments for energy efficiency in the buildings sector in Canada (grants), France (tax relief and loans), Germany (loans and grants), Ireland (grants) and Italy (white certificates and tax relief).

  1. Energy efficiency; Efficacite energetique

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-06-15

    This road-map proposes by the Group Total aims to inform the public on the energy efficiency. It presents the energy efficiency and intensity around the world with a particular focus on Europe, the energy efficiency in industry and Total commitment. (A.L.B.)

  2. Development of Energy Efficiency Indicators in Russia

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Russia is sometimes referred to as 'the Saudi Arabia of energy efficiency'; its vast potential to reduce energy consumption can be considered a significant 'energy reserve'. Russia, recognising the benefits of more efficient use of energy, is taking measures to exploit this potential. The president has set the goal to reduce energy intensity by 40% between 2007 and 2020. In the past few years, the IEA has worked closely with Russian authorities to support the development of energy efficiency indicators in Russia, critical to an effective implementation and monitoring of Russia's ambitious energy intensity and efficiency goals. The key findings of the IEA work with Russia on developing energy efficiency indicators form the core of this report.

  3. Efficient boiler operations sourcebook

    Energy Technology Data Exchange (ETDEWEB)

    Payne, F.W. (comp.)

    1985-01-01

    This book emphasizes the practical aspects of industrial and commercial boiler operations. It starts with a comprehensive review of general combustion and boiler fundamentals and then deals with specific efficiency improvement methods, and the cost savings which result. The book has the following chapter headings: boiler combustion fundamentals; boiler efficiency goals; major factors controlling boiler efficiency; boiler efficiency calculations; heat loss; graphical solutions; preparation for boiler testing; boiler test procedures; efficiency-related boiler maintenance procedures; boiler tune-up; boiler operational modifications; effect of water side and gas side scale deposits; load management; auxillary equipment to increase boiler efficiency; air preheaters and economizers; other types of auxillary equipment; combustion control systems and instrumentation; boiler O/sub 2/ trim controls; should you purchase a new boiler.; financial evaluation procedures; case studies. The last chapter includes a case study of a boiler burning pulverized coal and a case study of stoker-fired coal.

  4. Energy Efficiency Indicators Methodology Booklet

    Energy Technology Data Exchange (ETDEWEB)

    Sathaye, Jayant; Price, Lynn; McNeil, Michael; de la rue du Can, Stephane

    2010-05-01

    This Methodology Booklet provides a comprehensive review and methodology guiding principles for constructing energy efficiency indicators, with illustrative examples of application to individual countries. It reviews work done by international agencies and national government in constructing meaningful energy efficiency indicators that help policy makers to assess changes in energy efficiency over time. Building on past OECD experience and best practices, and the knowledge of these countries' institutions, relevant sources of information to construct an energy indicator database are identified. A framework based on levels of hierarchy of indicators -- spanning from aggregate, macro level to disaggregated end-use level metrics -- is presented to help shape the understanding of assessing energy efficiency. In each sector of activity: industry, commercial, residential, agriculture and transport, indicators are presented and recommendations to distinguish the different factors affecting energy use are highlighted. The methodology booklet addresses specifically issues that are relevant to developing indicators where activity is a major factor driving energy demand. A companion spreadsheet tool is available upon request.

  5. Energy sustainability: consumption, efficiency, and ...

    Science.gov (United States)

    One of the critical challenges in achieving sustainability is finding a way to meet the energy consumption needs of a growing population in the face of increasing economic prosperity and finite resources. According to ecological footprint computations, the global resource consumption began exceeding planetary supply in 1977 and by 2030, global energy demand, population, and gross domestic product are projected to greatly increase over 1977 levels. With the aim of finding sustainable energy solutions, we present a simple yet rigorous procedure for assessing and counterbalancing the relationship between energy demand, environmental impact, population, GDP, and energy efficiency. Our analyses indicated that infeasible increases in energy efficiency (over 100 %) would be required by 2030 to return to 1977 environmental impact levels and annual reductions (2 and 3 %) in energy demand resulted in physical, yet impractical requirements; hence, a combination of policy and technology approaches is needed to tackle this critical challenge. This work emphasizes the difficulty in moving toward energy sustainability and helps to frame possible solutions useful for policy and management. Based on projected energy consumption, environmental impact, human population, gross domestic product (GDP), and energy efficiency, for this study, we explore the increase in energy-use efficiency and the decrease in energy use intensity required to achieve sustainable environmental impact le

  6. Energy efficient solid state lighting

    Energy Technology Data Exchange (ETDEWEB)

    Dam-Hansen, C.; Petersen, Poul Michael

    2012-11-15

    Even though vast improvements have been made on efficiency and light quality, SSL is still in its infancy. One of the barriers for a market introduction is the price, which still is around 5 times higher than traditional lighting technologies. In order to fulfil the potential of SSL, further research and development needs to increase the light extraction from semiconductor materials, provide better and cheaper production and packaging, and advanced optical systems for optimized light distribution and new thermal solutions for SSL lamps and luminaires. Nanotechnology and applied research at DTU Fotonik in close collaboration with industry are essential parts in the development of new enhanced LED optical systems and LEDs with higher light extraction efficiency. Photonic crystals can help to efficiently extract light from LEDs and to form a desired emission profile. Future directions are devoted to the next generation of LEDs, in which the spontaneous emission is photon enhanced. One realization of this idea is using LEDs with a layer of nanocrystals, which are coupled to the quantum well of the LED. Such R and D work is ongoing all over the world and DOE roadmaps foresee luminous efficiencies by 2020 that are close to 250 lm/W for both cold and warm white light from LEDs, and prices in the order of one dollar per kilolumen. Such figures will drastically reduce the energy consumption worldwide for lighting, and hence a marked reduction in carbon emissions. (Author)

  7. Educated for Efficiency

    DEFF Research Database (Denmark)

    Amore, Mario Daniele; Bennedsen, Morten; Larsen, Birthe

    We study the effect of CEO education on a firm’s energy efficiency. Using a unique dataset of Danish firms, we document that firms led by more educated CEOs exhibit greater energy efficiency. We establish causality by employing exogenous CEO hospitalization episodes: the hospitalization of highly......-educated CEOs induces a drop in a firm’s energy efficiency, whereas the hospitalization of low-education CEOs does not have any significant effect. Disentangling the effect of educational length from that of the field of study, we find that the greater energy efficiency is mostly driven by the cumulated years...

  8. Improving Gas Flooding Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Reid Grigg; Robert Svec; Zheng Zeng; Alexander Mikhalin; Yi Lin; Guoqiang Yin; Solomon Ampir; Rashid Kassim

    2008-03-31

    This study focuses on laboratory studies with related analytical and numerical models, as well as work with operators for field tests to enhance our understanding of and capabilities for more efficient enhanced oil recovery (EOR). Much of the work has been performed at reservoir conditions. This includes a bubble chamber and several core flood apparatus developed or modified to measure interfacial tension (IFT), critical micelle concentration (CMC), foam durability, surfactant sorption at reservoir conditions, and pressure and temperature effects on foam systems.Carbon dioxide and N{sub 2} systems have been considered, under both miscible and immiscible conditions. The injection of CO2 into brine-saturated sandstone and carbonate core results in brine saturation reduction in the range of 62 to 82% brine in the tests presented in this paper. In each test, over 90% of the reduction occurred with less than 0.5 PV of CO{sub 2} injected, with very little additional brine production after 0.5 PV of CO{sub 2} injected. Adsorption of all considered surfactant is a significant problem. Most of the effect is reversible, but the amount required for foaming is large in terms of volume and cost for all considered surfactants. Some foams increase resistance to the value beyond what is practical in the reservoir. Sandstone, limestone, and dolomite core samples were tested. Dissolution of reservoir rock and/or cement, especially carbonates, under acid conditions of CO2 injection is a potential problem in CO2 injection into geological formations. Another potential change in reservoir injectivity and productivity will be the precipitation of dissolved carbonates as the brine flows and pressure decreases. The results of this report provide methods for determining surfactant sorption and can be used to aid in the determination of surfactant requirements for reservoir use in a CO{sub 2}-foam flood for mobility control. It also provides data to be used to determine rock permeability

  9. Southern Energy Efficiency Center (SEEC)

    Energy Technology Data Exchange (ETDEWEB)

    Vieira, Robin; Sonne, Jeffrey; Withers, Charles; Cummings, James; Verdict, Malcolm; Roberts, Sydney

    2009-09-30

    The Southern Energy Efficiency Center (SEEC) builds collaborative partnerships with: state and local governments and their program support offices, the building delivery industry (designers, contractors, realtors and commissioning agents), product manufacturers and their supply chains, utilities and their program implementers, consumers and other stakeholders in order to forge a strong regional network of building energy efficiency allies. Through a project Steering Committee composed of the state energy offices and building industry stakeholders, the SEEC works to establish consensus-based goals, priorities and strategies at the regional, state and local levels that will materially advance the deployment of high-performance “beyond code” buildings. In its first Phase, SEEC will provide limited technical and policy support assistance, training, certification and education to a wide spectrum of the building construction, codes and standards, and the consumer marketplace.

  10. Work team

    Directory of Open Access Journals (Sweden)

    RBE Editorial

    2016-06-01

    Full Text Available Work Team 2016 (Jan-Jul1. Editorial TeamChief-editorsBayardo Bapstista Torres, Instituto de Química (USP, BrasilEduardo Galembeck, Depto. Bioquímica, Instituto de Biologia, Universidade de Campinas (Unicamp, Brasil Co-editorsGabriel Gerber Hornink, Depto. Bioquímica, Instituto de Ciências Biomédicas, Universidade - Federal de Alfenas (Unifal-MG, BrasilVera Maria Treis Trindade, Departamento de Bioquímica, Instituto de Ciências Básicas da Saúde, Universidade Federal do Rio Grande do Sul (UFRGS, Brasil Editorial BoardAdriana Cassina, Department of Biochemistry, Facultad de Medicina, Universidad de la República, UruguayAngel Herráez, Departamento de Bioquímica y Biología molecular, Universidad de Alcalá de Henares, Madrid, SpainAndré Amaral Gonçalves Bianco, Universidade Federal de São Paulo (Unifesp, BrasilDenise Vaz de Macedo, Depto. Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas (Unicamp, BrasilEneida de Paula, Depto. Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas (Unicamp, BrasilJose Antonio Martinez Oyanedel, Universidad de Concepción, ChileJosep Maria Fernández Novell, Department of Molecular Biology & Biochemistry, Universitat de Barcelona, SpainLeila Maria Beltramini, Instituto de Física de São Carlos, Universidade Estadual de São Paulo (USP, BrasilManuel João da Costa, Escola de Ciências da Saúde, Universidade do Minho, PortugalMaria Lucia Bianconi, Instituto de Bioquímica Médica, Universidade Federal do Rio de Janeiro (UFRJ, BrasilMaría Noel Alvarez, Department of Biochemistry, Facultad de Medicina, Universidad de la República, UruguayMiguel Ángel Medina Torres, Department of Molecular Biology & Biochemistry Faculty of Sciences University of Málaga, SpainNelma Regina Segnini Bossolan, Instituto de Física de São Carlos, Universidade de São Paulo (USP, BrasilPaulo De Avila Junior, Centro de Ciências Naturais e Humanas (CCNH Universidade Federal do ABC (UFABC

  11. THEORETICAL FOUNDATIONS EFFICIENT MASS VALUATION

    Directory of Open Access Journals (Sweden)

    Koshel A.

    2016-08-01

    composition of results and consideration of cost, given different definitions of efficiency and offered various ways to measure. The question of social, environmental and other efficiency are considered generally as elements that complement economic efficiency. For land evaluation work efficiency are the following types: economic (increase in tax collection and tax payments; ecological (removal of the negative impact on the earth, the environment; social (improvement of living conditions of the population in a particular area; information (identifying objects not previously recorded, increasing the number of taxpayers. Achieving economic or social effect due to the need for ongoing and one-time costs. The ongoing related costs included in cost of production. In order to improve the efficiency of monetary value of land mass based methods, in our view, to apply emergency measures to correct the situation in the monetary evaluation assessments, namely: - need to develop clear and understandable regulations for the implementation of mass land valuation, passage of expertise, information and other aspects of the implementation of inventory and evaluation work; - should develop new or significantly alter already existing methods so that they meet the requirements of international law, international standards of evaluation, and allow the user to understand the simple manufacturing process works; - appraiser who performs the mass appraisal should be fully independent and protected by law from public authorities.

  12. Institutions, Equilibria and Efficiency

    DEFF Research Database (Denmark)

    Competition and efficiency is at the core of economic theory. This volume collects papers of leading scholars, which extend the conventional general equilibrium model in important ways. Efficiency and price regulation are studied when markets are incomplete and existence of equilibria in such set...... in OLG, learning in OLG and in games, optimal pricing of derivative securities, the impact of heterogeneity...

  13. Energy Efficiency Collaboratives

    Energy Technology Data Exchange (ETDEWEB)

    Li, Michael [US Department of Energy, Washington, DC (United States); Bryson, Joe [US Environmental Protection Agency, Washington, DC (United States)

    2015-09-01

    Collaboratives for energy efficiency have a long and successful history and are currently used, in some form, in more than half of the states. Historically, many state utility commissions have used some form of collaborative group process to resolve complex issues that emerge during a rate proceeding. Rather than debate the issues through the formality of a commission proceeding, disagreeing parties are sent to discuss issues in a less-formal setting and bring back resolutions to the commission. Energy efficiency collaboratives take this concept and apply it specifically to energy efficiency programs—often in anticipation of future issues as opposed to reacting to a present disagreement. Energy efficiency collaboratives can operate long term and can address the full suite of issues associated with designing, implementing, and improving energy efficiency programs. Collaboratives can be useful to gather stakeholder input on changing program budgets and program changes in response to performance or market shifts, as well as to provide continuity while regulators come and go, identify additional energy efficiency opportunities and innovations, assess the role of energy efficiency in new regulatory contexts, and draw on lessons learned and best practices from a diverse group. Details about specific collaboratives in the United States are in the appendix to this guide. Collectively, they demonstrate the value of collaborative stakeholder processes in producing successful energy efficiency programs.

  14. efficience technico-economique

    African Journals Online (AJOL)

    USER

    ABSTRACT. TECHNICO-ECONOMIC EFFICIENCY : CASE OF THE PRODUCERS OF ONION AND POTATO IN KNOW IN MOROCCO. In the new context ... Key words : Technico-economic efficiency, stochastic frontier, potato production, onion production, Morocco ..... sont le labour, le cover-cropage et le traçage. 82 % des ...

  15. Nitrogen use efficiency (NUE)

    NARCIS (Netherlands)

    Oenema, O.

    2015-01-01

    There is a need for communications about resource use efficiency and for measures to increase the use efficiency of nutrients in relation to food production. This holds especially for nitrogen. Nitrogen (N) is essential for life and a main nutrient element. It is needed in relatively large

  16. Logistics, Management and Efficiency

    OpenAIRE

    Mircea UDRESCU; Sandu CUTURELA

    2014-01-01

    The problem related to the efficiency of the management for organization is general being the concern off all managers. In the present essay we consider that the efficacy of the organization begins from the structural systemization of the organizational management into general management, management of logistics and management of production which demands a new managerial process, more competitive based on economic efficiency.

  17. Energy efficiency and behaviour

    DEFF Research Database (Denmark)

    Carstensen, Trine Agervig; Kunnasvirta, Annika; Kiviluoto, Katariina

    separate key aspects hinders strategic energy efficiency planning. For this reason, the PLEEC project – “Planning for Energy Efficient Cities” – funded by the EU Seventh Framework Programme uses an integrative approach to achieve the sus‐ tainable, energy– efficient, smart city. By coordinating strategies...... to conduct behavioural interventions, to be presented in Deliverable 5.5., the final report. This report will also provide valuable information for the WP6 general model for an Energy-Smart City. Altogether 38 behavioural interventions are analysed in this report. Each collected and analysed case study...... of the European Union’s 20‐20‐20 plan is to improve energy efficiency by 20% in 2020. However, holistic knowledge about energy efficiency potentials in cities is far from complete. Currently, a WP4 location in PLEEC project page 3 variety of individual strategies and approaches by different stakeholders tackling...

  18. Energy efficiency of mobile soft robots.

    Science.gov (United States)

    Shui, Langquan; Zhu, Liangliang; Yang, Zhe; Liu, Yilun; Chen, Xi

    2017-11-15

    The performance of mobile soft robots is usually characterized by their locomotion/velocity efficiency, whereas the energy efficiency is a more intrinsic and fundamental criterion for the performance evaluation of independent or integrated soft robots. In this work, a general framework is established to evaluate the energy efficiency of mobile soft robots by considering the efficiency of the energy source, actuator and locomotion, and some insights for improving the efficiency of soft robotic systems are presented. Proposed as the ratio of the desired locomotion kinetic energy to the input mechanical energy, the energy efficiency of locomotion is found to play a critical role in determining the overall energy efficiency of soft robots. Four key factors related to the locomotion energy efficiency are identified, that is, the locomotion modes, material properties, geometric sizes, and actuation states. It is found that the energy efficiency of most mobile soft robots reported in the literature is surprisingly low (mostly below 0.1%), due to the inefficient mechanical energy that essentially does not contribute to the desired locomotion. A comparison of the locomotion energy efficiency for several representative locomotion modes in the literature is presented, showing a descending ranking as: jumping ≫ fish-like swimming > snake-like slithering > rolling > rising/turning over > inchworm-like inching > quadruped gait > earthworm-like squirming. Besides, considering the same locomotion mode, soft robots with lower stiffness, higher density and larger size tend to have higher locomotion energy efficiency. Moreover, a periodic pulse actuation instead of a continuous actuation mode may significantly reduce the input mechanical energy, thus improving the locomotion energy efficiency, especially when the pulse actuation matches the resonant states of the soft robots. The results presented herein indicate a large and necessary space for improving the locomotion energy

  19. Efficient Strictness Analysis of Haskell

    DEFF Research Database (Denmark)

    Jensen, Kristian Damm; Hjæresen, Peter; Rosendahl, Mads

    1994-01-01

    Strictness analysis has been a living field of investigation since Mycroft's original work in 1980, and is getting increasingly significant with the still wider use of lazy functional programming languages. This paper focuses on an actual implementation of a strictness analyser for Haskell....... The analyser uses abstract interpretation with chaotic fixpoint iteration. The demand-driven nature of this iteration technique allows us to use large domains including function domains in the style of Burn et al. 1986 and Wadler 87 and retain reasonable efficiency. The implementation, furthermore, allows us...

  20. Production Efficiency Audit on Tea Beverage Agroindustry

    Directory of Open Access Journals (Sweden)

    Hendra Adiyatna, . Marimin

    2001-04-01

    Full Text Available The objective of this work was to investigate and to apply economic efficiency performance measurement methods for tea beverage agroindustry. These measurements were based on twelve technique and economic efficiency criteria, which illustrate the condition of the processes. This illustration was able to explain the material and the energy utilization, variance of the processes and product, handling of the waste and acceptance in the market. The methodology was divided into three steps: (1 defining the technique and the economic criteria, appropriate to the circumstance of the processes, (2 state efficiency the level status, (3 evaluation and structure prioritizing of the processes improvement alternatives. The results of this work indicates that there are seven appropriate criteria. The status of the efficiency is in the medium level. The improvement priorities recommended include optimization of material and energy usage and minimization of breaktime of the critical processes

  1. Beyond Work-Life "Integration".

    Science.gov (United States)

    Williams, Joan C; Berdahl, Jennifer L; Vandello, Joseph A

    2016-01-01

    Research on the work-family interface began in the 1960s and has grown exponentially ever since. This vast amount of research, however, has had relatively little impact on workplace practice, and work-family conflict is at an all-time high. We review the work-family research to date and propose that a shift of attention is required, away from the individual experience of work and family and toward understanding how identity and status are defined at work. Several factors enshrine cherished identities around current workplace norms. The work devotion schema demands that those who are truly committed to their work will make it the central or sole focus of their lives, without family demands to distract them. Importantly, the work devotion schema underwrites valued class and gender identities: Work devotion is a key way of enacting elite class status and functions as the measure of a man--the longer the work hours and higher the demand for his attention, the better. Advocating change in the way work is done and life is lived meets resistance because it places these cherished identities at risk. Resistance to these identity threats keeps current workplace norms in place. This is why even the business case-which shows that current practices are not economically efficient-fails to persuade organizations to enact change. What is needed now is sustained attention to the implicit psychological infrastructure that cements the mismatch between today's workplace and today's workforce.

  2. Measuring cardiac efficiency using PET/MRI

    Energy Technology Data Exchange (ETDEWEB)

    Gullberg, Grand [Lawrence Berkeley National Laboratory (United States); Aparici, Carina Mari; Brooks, Gabriel [University of California San Francisco (United States); Liu, Jing; Guccione, Julius; Saloner, David; Seo, Adam Youngho; Ordovas, Karen Gomes [Lawrence Berkeley National Laboratory (United States)

    2015-05-18

    Heart failure (HF) is a complex syndrome that is projected by the American Heart Association to cost $160 billion by 2030. In HF, significant metabolic changes and structural remodeling lead to reduced cardiac efficiency. A normal heart is approximately 20-25% efficient measured by the ratio of work to oxygen utilization (1 ml oxygen = 21 joules). The heart requires rapid production of ATP where there is complete turnover of ATP every 10 seconds with 90% of ATP produced by mitochondrial oxidative metabolism requiring substrates of approximately 30% glucose and 65% fatty acids. In our preclinical PET/MRI studies in normal rats, we showed a negative correlation between work and the influx rate constant for 18FDG, confirming that glucose is not the preferred substrate at rest. However, even though fatty acid provides 9 kcal/gram compared to 4 kcal/gram for glucose, in HF the preferred energy source is glucose. PET/MRI offers the potential to study this maladapted mechanism of metabolism by measuring work in a region of myocardial tissue simultaneously with the measure of oxygen utilization, glucose, and fatty acid metabolism and to study cardiac efficiency in the etiology of and therapies for HF. MRI is used to measure strain and a finite element mechanical model using pressure measurements is used to estimate myofiber stress. The integral of strain times stress provides a measure of work which divided by energy utilization, estimated by the production of 11CO2 from intravenous injection of 11C-acetate, provides a measure of cardiac efficiency. Our project involves translating our preclinical research to the clinical application of measuring cardiac efficiency in patients. Using PET/MRI to develop technologies for studying myocardial efficiency in patients, provides an opportunity to relate cardiac work of specific tissue regions to metabolic substrates, and measure the heterogeneity of LV efficiency.

  3. Measuring cardiac efficiency using PET/MRI

    International Nuclear Information System (INIS)

    Gullberg, Grand; Aparici, Carina Mari; Brooks, Gabriel; Liu, Jing; Guccione, Julius; Saloner, David; Seo, Adam Youngho; Ordovas, Karen Gomes

    2015-01-01

    Heart failure (HF) is a complex syndrome that is projected by the American Heart Association to cost $160 billion by 2030. In HF, significant metabolic changes and structural remodeling lead to reduced cardiac efficiency. A normal heart is approximately 20-25% efficient measured by the ratio of work to oxygen utilization (1 ml oxygen = 21 joules). The heart requires rapid production of ATP where there is complete turnover of ATP every 10 seconds with 90% of ATP produced by mitochondrial oxidative metabolism requiring substrates of approximately 30% glucose and 65% fatty acids. In our preclinical PET/MRI studies in normal rats, we showed a negative correlation between work and the influx rate constant for 18FDG, confirming that glucose is not the preferred substrate at rest. However, even though fatty acid provides 9 kcal/gram compared to 4 kcal/gram for glucose, in HF the preferred energy source is glucose. PET/MRI offers the potential to study this maladapted mechanism of metabolism by measuring work in a region of myocardial tissue simultaneously with the measure of oxygen utilization, glucose, and fatty acid metabolism and to study cardiac efficiency in the etiology of and therapies for HF. MRI is used to measure strain and a finite element mechanical model using pressure measurements is used to estimate myofiber stress. The integral of strain times stress provides a measure of work which divided by energy utilization, estimated by the production of 11CO2 from intravenous injection of 11C-acetate, provides a measure of cardiac efficiency. Our project involves translating our preclinical research to the clinical application of measuring cardiac efficiency in patients. Using PET/MRI to develop technologies for studying myocardial efficiency in patients, provides an opportunity to relate cardiac work of specific tissue regions to metabolic substrates, and measure the heterogeneity of LV efficiency.

  4. High efficiency and broadband acoustic diodes

    Science.gov (United States)

    Fu, Congyi; Wang, Bohan; Zhao, Tianfei; Chen, C. Q.

    2018-01-01

    Energy transmission efficiency and working bandwidth are the two major factors limiting the application of current acoustic diodes (ADs). This letter presents a design of high efficiency and broadband acoustic diodes composed of a nonlinear frequency converter and a linear wave filter. The converter consists of two masses connected by a bilinear spring with asymmetric tension and compression stiffness. The wave filter is a linear mass-spring lattice (sonic crystal). Both numerical simulation and experiment show that the energy transmission efficiency of the acoustic diode can be improved by as much as two orders of magnitude, reaching about 61%. Moreover, the primary working band width of the AD is about two times of the cut-off frequency of the sonic crystal filter. The cut-off frequency dependent working band of the AD implies that the developed AD can be scaled up or down from macro-scale to micro- and nano-scale.

  5. Efficiency of emergency exercises

    International Nuclear Information System (INIS)

    Zander, N.; Sogalla, M.

    2011-01-01

    In order to cope with accidents beyond the design basis within German nuclear power plants which possibly lead to relevant radiological consequences, the utilities as well as the competent authorities exist emergency organisations. The efficiency, capacity for teamwork and preparedness of such organisations should be tested by regular, efficient exercise activities. Such activities can suitably be based on scenarios which provide challenging tasks for all units of the respective emergency organisation. Thus, the demonstration and further development of the efficiency of the respective organisational structures, including their ability to collaborate, is promoted. (orig.)

  6. Learning efficient correlated equilibria

    KAUST Repository

    Borowski, Holly P.; Marden, Jason R.; Shamma, Jeff S.

    2014-01-01

    The majority of distributed learning literature focuses on convergence to Nash equilibria. Correlated equilibria, on the other hand, can often characterize more efficient collective behavior than even the best Nash equilibrium. However, there are no existing distributed learning algorithms that converge to specific correlated equilibria. In this paper, we provide one such algorithm which guarantees that the agents' collective joint strategy will constitute an efficient correlated equilibrium with high probability. The key to attaining efficient correlated behavior through distributed learning involves incorporating a common random signal into the learning environment.

  7. Learning efficient correlated equilibria

    KAUST Repository

    Borowski, Holly P.

    2014-12-15

    The majority of distributed learning literature focuses on convergence to Nash equilibria. Correlated equilibria, on the other hand, can often characterize more efficient collective behavior than even the best Nash equilibrium. However, there are no existing distributed learning algorithms that converge to specific correlated equilibria. In this paper, we provide one such algorithm which guarantees that the agents\\' collective joint strategy will constitute an efficient correlated equilibrium with high probability. The key to attaining efficient correlated behavior through distributed learning involves incorporating a common random signal into the learning environment.

  8. Shrew trap efficiency

    DEFF Research Database (Denmark)

    Gambalemoke, Mbalitini; Mukinzi, Itoka; Amundala, Drazo

    2008-01-01

    We investigated the efficiency of four trap types (pitfall, Sherman LFA, Victor snap and Museum Special snap traps) to capture shrews. This experiment was conducted in five inter-riverine forest blocks in the region of Kisangani. The total trapping effort was 6,300, 9,240, 5,280 and 5,460 trap......, our results indicate that pitfall traps are the most efficient for capturing shrews: not only do they have a higher efficiency (yield), but the taxonomic diversity of shrews is also higher when pitfall traps are used....

  9. The Efficient Windows Collaborative

    Energy Technology Data Exchange (ETDEWEB)

    Petermann, Nils

    2006-03-31

    The Efficient Windows Collaborative (EWC) is a coalition of manufacturers, component suppliers, government agencies, research institutions, and others who partner to expand the market for energy efficient window products. Funded through a cooperative agreement with the U.S. Department of Energy, the EWC provides education, communication and outreach in order to transform the residential window market to 70% energy efficient products by 2005. Implementation of the EWC is managed by the Alliance to Save Energy, with support from the University of Minnesota and Lawrence Berkeley National Laboratory.

  10. 90 measurement of technical efficiency and its determinants in crop ...

    African Journals Online (AJOL)

    OLUWOLE AKINNAGBE

    They found that education, number of working animals, credit per acre and number of extension visits significantly increased cost efficiency while large land holding size significantly decreased cost efficiency. In single estimation approach of the technical efficiency model for Indian farmers,. Colli et al (1998), found that years ...

  11. Walking beam pumping unit system efficiency measurements

    International Nuclear Information System (INIS)

    Kilgore, J.J.; Tripp, H.A.; Hunt, C.L. Jr.

    1991-01-01

    The cost of electricity used by walking beam pumping units is a major expense in producing crude oil. However, only very limited information is available on the efficiency of beam pumping systems and less is known about the efficiency of the various components of the pumping units. This paper presents and discusses measurements that have been made on wells at several Shell locations and on a specially designed walking beam pump test stand at Lufkin Industries. These measurements were made in order to determine the overall system efficiency and efficiency of individual components. The results of this work show that the overall beam pumping system efficiency is normally between 48 and 58 percent. This is primarily dependent on the motor size, motor type, gearbox size, system's age, production, pump size, tubing size, and rod sizes

  12. Efficient Metropolitan Resource Allocation

    Directory of Open Access Journals (Sweden)

    Richard Arnott

    2016-05-01

    Full Text Available Over the past 30 years Calgary has doubled in size, from a population of 640,645 in 1985 to 1,230,915 in 2015. During that time the City has had five different mayors, hosted the Winter Olympics, and expanded the C-Train from 25 platforms to 45. Calgary’s Metropolitan Area has grown too, with Airdrie, Chestermere, Okotoks and Cochrane growing into full-fledged cities, ripe with inter-urban commuters.* And with changes to provincial legislation in the mid-’90s, rural Rocky View County and the Municipal District of Foothills are now real competitors for residential, commercial and industrial development that in the past would have been considered urban. In this metropolitan system, where people live, their household structure, and their place of work informs the services they need to conduct their daily lives, and directly impacts the spatial character of the City and the broader region. In sum, Metropolitan Calgary is increasingly complex. Calgary and the broader metropolitan area will continue to grow, even with the current economic slowdown. Frictions within Calgary, between the various municipalities in the metropolitan area, and the priorities of other local authorities (such as the School Boards and Alberta Health Services will continue to impact the agendas of local politicians and their ability to answer to the needs of their residents. How resources – whether it is hard infrastructure, affordable housing, classrooms, or hospital beds – are allocated over space and how these resources are funded, directly impacts these relationships. This technical paper provides my perspective as an urban economist on the efficient allocation of resources within a metropolitan system in general, with reference to Calgary where appropriate, and serves as a companion to the previously released “Reflections on Calgary’s Spatial Structure: An Urban Economists Critique of Municipal Planning in Calgary.” It is hoped that the concepts reviewed

  13. Transport Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Transport is the sector with the highest final energy consumption and, without any significant policy changes, is forecast to remain so. In 2008, the IEA published 25 energy efficiency recommendations, among which four are for the transport sector. The recommendations focus on road transport and include policies on improving tyre energy efficiency, fuel economy standards for both light-duty vehicles and heavy-duty vehicles, and eco-driving. Implementation of the recommendations has been weaker in the transport sector than others. This paper updates the progress that has been made in implementing the transport energy efficiency recommendations in IEA countries since March 2009. Many countries have in the last year moved from 'planning to implement' to 'implementation underway', but none have fully implemented all transport energy efficiency recommendations. The IEA calls therefore for full and immediate implementation of the recommendations.

  14. Efficient incremental relaying

    KAUST Repository

    Fareed, Muhammad Mehboob; Alouini, Mohamed-Slim

    2013-01-01

    We propose a novel relaying scheme which improves the spectral efficiency of cooperative diversity systems by utilizing limited feedback from destination. Our scheme capitalizes on the fact that relaying is only required when direct transmission

  15. Improving efficiency in stereology

    DEFF Research Database (Denmark)

    Keller, Kresten Krarup; Andersen, Ina Trolle; Andersen, Johnnie Bremholm

    2013-01-01

    of the study was to investigate the time efficiency of the proportionator and the autodisector on virtual slides compared with traditional methods in a practical application, namely the estimation of osteoclast numbers in paws from mice with experimental arthritis and control mice. Tissue slides were scanned......, a proportionator sampling and a systematic, uniform random sampling were simulated. We found that the proportionator was 50% to 90% more time efficient than systematic, uniform random sampling. The time efficiency of the autodisector on virtual slides was 60% to 100% better than the disector on tissue slides. We...... conclude that both the proportionator and the autodisector on virtual slides may improve efficiency of cell counting in stereology....

  16. Efficient incremental relaying

    KAUST Repository

    Fareed, Muhammad Mehboob

    2013-07-01

    We propose a novel relaying scheme which improves the spectral efficiency of cooperative diversity systems by utilizing limited feedback from destination. Our scheme capitalizes on the fact that relaying is only required when direct transmission suffers deep fading. We calculate the packet error rate for the proposed efficient incremental relaying scheme with both amplify and forward and decode and forward relaying. Numerical results are also presented to verify their analytical counterparts. © 2013 IEEE.

  17. More efficient together

    DEFF Research Database (Denmark)

    Zhang, Tian

    2015-01-01

    The solar-to-biomass conversion efficiency of natural photosynthesis is between 2.9 and 4.3% for most crops (1, 2). Improving the efficiency of photosynthesis could help increase the appeal of biologically derived fuels and chemicals in comparison with traditional petrochemical processes. One app...... competition between biotechnology and the food industry and avoid the environmental perturbation caused by intensive agriculture (3)....

  18. Thermodynamically efficient solar concentrators

    Science.gov (United States)

    Winston, Roland

    2012-10-01

    Non-imaging Optics is the theory of thermodynamically efficient optics and as such depends more on thermodynamics than on optics. Hence in this paper a condition for the "best" design is proposed based on purely thermodynamic arguments, which we believe has profound consequences for design of thermal and even photovoltaic systems. This new way of looking at the problem of efficient concentration depends on probabilities, the ingredients of entropy and information theory while "optics" in the conventional sense recedes into the background.

  19. Efficient Windows Collaborative

    Energy Technology Data Exchange (ETDEWEB)

    Nils Petermann

    2010-02-28

    The project goals covered both the residential and commercial windows markets and involved a range of audiences such as window manufacturers, builders, homeowners, design professionals, utilities, and public agencies. Essential goals included: (1) Creation of 'Master Toolkits' of information that integrate diverse tools, rating systems, and incentive programs, customized for key audiences such as window manufacturers, design professionals, and utility programs. (2) Delivery of education and outreach programs to multiple audiences through conference presentations, publication of articles for builders and other industry professionals, and targeted dissemination of efficient window curricula to professionals and students. (3) Design and implementation of mechanisms to encourage and track sales of more efficient products through the existing Window Products Database as an incentive for manufacturers to improve products and participate in programs such as NFRC and ENERGY STAR. (4) Development of utility incentive programs to promote more efficient residential and commercial windows. Partnership with regional and local entities on the development of programs and customized information to move the market toward the highest performing products. An overarching project goal was to ensure that different audiences adopt and use the developed information, design and promotion tools and thus increase the market penetration of energy efficient fenestration products. In particular, a crucial success criterion was to move gas and electric utilities to increase the promotion of energy efficient windows through demand side management programs as an important step toward increasing the market share of energy efficient windows.

  20. Feedback and efficient behavior.

    Directory of Open Access Journals (Sweden)

    Sandro Casal

    Full Text Available Feedback is an effective tool for promoting efficient behavior: it enhances individuals' awareness of choice consequences in complex settings. Our study aims to isolate the mechanisms underlying the effects of feedback on achieving efficient behavior in a controlled environment. We design a laboratory experiment in which individuals are not aware of the consequences of different alternatives and, thus, cannot easily identify the efficient ones. We introduce feedback as a mechanism to enhance the awareness of consequences and to stimulate exploration and search for efficient alternatives. We assess the efficacy of three different types of intervention: provision of social information, manipulation of the frequency, and framing of feedback. We find that feedback is most effective when it is framed in terms of losses, that it reduces efficiency when it includes information about inefficient peers' behavior, and that a lower frequency of feedback does not disrupt efficiency. By quantifying the effect of different types of feedback, our study suggests useful insights for policymakers.

  1. Supernovae Discovery Efficiency

    Science.gov (United States)

    John, Colin

    2018-01-01

    Abstract:We present supernovae (SN) search efficiency measurements for recent Hubble Space Telescope (HST) surveys. Efficiency is a key component to any search, and is important parameter as a correction factor for SN rates. To achieve an accurate value for efficiency, many supernovae need to be discoverable in surveys. This cannot be achieved from real SN only, due to their scarcity, so fake SN are planted. These fake supernovae—with a goal of realism in mind—yield an understanding of efficiency based on position related to other celestial objects, and brightness. To improve realism, we built a more accurate model of supernovae using a point-spread function. The next improvement to realism is planting these objects close to galaxies and of various parameters of brightness, magnitude, local galactic brightness and redshift. Once these are planted, a very accurate SN is visible and discoverable by the searcher. It is very important to find factors that affect this discovery efficiency. Exploring the factors that effect detection yields a more accurate correction factor. Further inquires into efficiency give us a better understanding of image processing, searching techniques and survey strategies, and result in an overall higher likelihood to find these events in future surveys with Hubble, James Webb, and WFIRST telescopes. After efficiency is discovered and refined with many unique surveys, it factors into measurements of SN rates versus redshift. By comparing SN rates vs redshift against the star formation rate we can test models to determine how long star systems take from the point of inception to explosion (delay time distribution). This delay time distribution is compared to SN progenitors models to get an accurate idea of what these stars were like before their deaths.

  2. Promotion of Efficient Use of Energy

    Energy Technology Data Exchange (ETDEWEB)

    Harry Misuriello; DOE Project Officer - Keith Bennett

    2006-01-25

    The Department of Energy funded the Alliance to Save Energy to promote the efficient use of energy under a multiyear cooperative agreement. This funding allowed the Alliance to be innovative and flexible in its program development, and to initiate and enhance projects it would otherwise not have been able to pursue. The program period was 1999 through 2004. The mission of the Alliance to Save Energy is to promote energy efficiency domestically and worldwide. The Alliance followed this mission by working closely with consumers, government, policy makers, and energy efficient product and service providers. The projects that were initiated by the Alliance included communication and consumer education, policy analysis and research, the promotion of interaction among the energy efficiency industry, and international energy efficiency programs. The funding from the Department of Energy allowed the Alliance to study new issues in energy efficiency, draw public attention to those issues, and create targeted programs, such as the Efficient Windows Collaborative or the Green Schools program, which now function on their own to promote energy efficiency in important areas.

  3. Monitoring tools for energy efficiency in Europe

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This document brings together the different definitions of the indicators used in the European Odyssee project on energy efficiency indicators. This project was initiated in 1990. It benefits from the combined support of the SAVE programme of the European Commission, of Ademe and of 15 national Efficiency Agencies within the European network of energy efficiency agencies. The objective of the project is to develop and maintain indicators that enable to review progress in energy efficiency and CO{sub 2} emissions abatement, by sector, end-use, etc.. for each country and the EU as a whole. To reach this objective, all data and indicators are stored in a common database called ODYSSEE that is regularly updated. A common methodology is used to produce comparative energy efficiency indicators from the database. The definitions presented in this document concern: 1) the general points (energy intensity, consumption, savings, efficiency, the unit consumption effect and index, the technological effect or savings, the substitution effect and the behavioural/management effect); 2) the macro-indicators (primary and final energy intensities at constant structure, at purchasing power parities, at reference economic structure); 3) industry (energy intensity of industry/manufacturing, of industry at constant structure and at reference structure, unit consumption of steel, cement etc.., process effect); 4) transports (energy intensity, unit consumption of vehicles, average specific consumption, test specific consumption, unit consumption, specific consumption, behavioural energy savings; 5) households and services (unit consumption, specific consumption, energy intensity of households, appliances); 6) transformations (apparent efficiency of energy sector or transformations, efficiency at constant fuel mix, efficiency of electricity sector). The same work is made for the 'key energy efficiency indicators', for the 'aggregate energy efficiency indicators' for

  4. Energy efficiency in pumps

    Energy Technology Data Exchange (ETDEWEB)

    Kaya, Durmus; Yagmur, E. Alptekin [TUBITAK-MRC, P.O. Box 21, 41470 Gebze, Kocaeli (Turkey); Yigit, K. Suleyman; Eren, A. Salih; Celik, Cenk [Engineering Faculty, Kocaeli University, Kocaeli (Turkey); Kilic, Fatma Canka [Department of Air Conditioning and Refrigeration, Kocaeli University, Kullar, Kocaeli (Turkey)

    2008-06-15

    In this paper, ''energy efficiency'' studies, done in a big industrial facility's pumps, are reported. For this purpose; the flow rate, pressure and temperature have been measured for each pump in different operating conditions and at maximum load. In addition, the electrical power drawn by the electric motor has been measured. The efficiencies of the existing pumps and electric motor have been calculated by using the measured data. Potential energy saving opportunities have been studied by taking into account the results of the calculations for each pump and electric motor. As a conclusion, improvements should be made each system. The required investment costs for these improvements have been determined, and simple payback periods have been calculated. The main energy saving opportunities result from: replacements of the existing low efficiency pumps, maintenance of the pumps whose efficiencies start to decline at certain range, replacements of high power electric motors with electric motors that have suitable power, usage of high efficiency electric motors and elimination of cavitation problems. (author)

  5. Energy efficiency in pumps

    International Nuclear Information System (INIS)

    Kaya, Durmus; Yagmur, E. Alptekin; Yigit, K. Suleyman; Kilic, Fatma Canka; Eren, A. Salih; Celik, Cenk

    2008-01-01

    In this paper, 'energy efficiency' studies, done in a big industrial facility's pumps, are reported. For this purpose; the flow rate, pressure and temperature have been measured for each pump in different operating conditions and at maximum load. In addition, the electrical power drawn by the electric motor has been measured. The efficiencies of the existing pumps and electric motor have been calculated by using the measured data. Potential energy saving opportunities have been studied by taking into account the results of the calculations for each pump and electric motor. As a conclusion, improvements should be made each system. The required investment costs for these improvements have been determined, and simple payback periods have been calculated. The main energy saving opportunities result from: replacements of the existing low efficiency pumps, maintenance of the pumps whose efficiencies start to decline at certain range, replacements of high power electric motors with electric motors that have suitable power, usage of high efficiency electric motors and elimination of cavitation problems

  6. Span efficiency in hawkmoths.

    Science.gov (United States)

    Henningsson, Per; Bomphrey, Richard J

    2013-07-06

    Flight in animals is the result of aerodynamic forces generated as flight muscles drive the wings through air. Aerial performance is therefore limited by the efficiency with which momentum is imparted to the air, a property that can be measured using modern techniques. We measured the induced flow fields around six hawkmoth species flying tethered in a wind tunnel to assess span efficiency, ei, and from these measurements, determined the morphological and kinematic characters that predict efficient flight. The species were selected to represent a range in wingspan from 40 to 110 mm (2.75 times) and in mass from 0.2 to 1.5 g (7.5 times) but they were similar in their overall shape and their ecology. From high spatio-temporal resolution quantitative wake images, we extracted time-resolved downwash distributions behind the hawkmoths, calculating instantaneous values of ei throughout the wingbeat cycle as well as multi-wingbeat averages. Span efficiency correlated positively with normalized lift and negatively with advance ratio. Average span efficiencies for the moths ranged from 0.31 to 0.60 showing that the standard generic value of 0.83 used in previous studies of animal flight is not a suitable approximation of aerodynamic performance in insects.

  7. National energy efficiency programme

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper focusses on energy conservation and specifically on energy efficiency which includes efficiency in the production, delivery and utilisation of energy as part of the total energy system of the economy. A National Energy Efficiency Programme is being launched in the Eighth Plan that will take into account both macro level and policy and planning considerations as well as micro level responses for different category of users in the industry, agriculture, transport and domestic sectors. The need for such a National Energy Efficiency Programme after making an assessment of existing energy conservation activities in the country is discussed. The broad framework and contents of the National Energy Efficiency Programme have been outlined and the Eighth Plan targets for energy conservation and their break-up have been given. These targets, as per the Eighth Plan document are 5000 MW in electricity installed capacity and 6 million tonnes of petroleum products by the terminal year of the Eighth Plan. The issues that need to be examined for each sector for achieving the above targets for energy conservation in the Eighth Plan are discussed briefly. They are: (a) policy and planning, (b) implementation arrangements which include the institutional setup and selective legislation, (c) technological requirements, and (d) resource requirements which include human resources and financial resources. (author)

  8. Detailed analysis of the effect of the turbine and compressor isentropic efficiency on the thermal and exergy efficiency of a Brayton cycle

    Directory of Open Access Journals (Sweden)

    Živić Marija

    2014-01-01

    Full Text Available Energy and exergy analysis of a Brayton cycle with an ideal gas is given. The irreversibility of the adiabatic processes in turbine and compressor is taken into account through their isentropic efficiencies. The net work per cycle, the thermal efficiency and the two exergy efficiencies are expressed as functions of the four dimensionless variables: the isentropic efficiencies of turbine and compressor, the pressure ratio, and the temperature ratio. It is shown that the maximal values of the net work per cycle, the thermal and the exergy efficiency are achieved when the isentropic efficiencies and temperature ratio are as high as possible, while the different values of pressure ratio that maximize the net work per cycle, the thermal and the exergy efficiencies exist. These pressure ratios increase with the increase of the temperature ratio and the isentropic efficiency of compressor and turbine. The increase of the turbine isentropic efficiency has a greater impact on the increase of the net work per cycle and the thermal efficiency of a Brayton cycle than the same increase of compressor isentropic efficiency. Finally, two goal functions are proposed for thermodynamic optimization of a Brayton cycle for given values of the temperature ratio and the compressor and turbine isentropic efficiencies. The first maximizes the sum of the net work per cycle and thermal efficiency while the second the net work per cycle and exergy efficiency. In both cases the optimal pressure ratio is closer to the pressure ratio that maximizes the net work per cycle.

  9. Energy efficiency and proliferation assessment factors

    International Nuclear Information System (INIS)

    1979-02-01

    The objective of INFCE is to evaluate the nuclear fuel cycles from the point of view of their ability to satisfy the worldwide nuclear energy needs, while minimizing the proliferation risks. Accordingly, the different working groups have to take into consideration as well the energy-efficiency and the proliferation-resistance of these nuclear fuel cycles. The present working paper is aimed at suggesting the main assessment factors which should be taken into consideration

  10. Efficient convolutional sparse coding

    Science.gov (United States)

    Wohlberg, Brendt

    2017-06-20

    Computationally efficient algorithms may be applied for fast dictionary learning solving the convolutional sparse coding problem in the Fourier domain. More specifically, efficient convolutional sparse coding may be derived within an alternating direction method of multipliers (ADMM) framework that utilizes fast Fourier transforms (FFT) to solve the main linear system in the frequency domain. Such algorithms may enable a significant reduction in computational cost over conventional approaches by implementing a linear solver for the most critical and computationally expensive component of the conventional iterative algorithm. The theoretical computational cost of the algorithm may be reduced from O(M.sup.3N) to O(MN log N), where N is the dimensionality of the data and M is the number of elements in the dictionary. This significant improvement in efficiency may greatly increase the range of problems that can practically be addressed via convolutional sparse representations.

  11. Efficiency of scanning automatons

    International Nuclear Information System (INIS)

    Shkundenkov, V.N.

    1977-01-01

    Investigated are the methods for improving the efficiency of the picture processing system based on an automatic scanner. Discussed are two types of such a system. In the first case the system contains both automatic and semi-automatic scanners. In the second case the system includes only the automatic scanners with the man-to-computer dialog facilities. For analyzing the role of the automatic scanner and the role of the operator in the processing system use is made of the processing system balance equation. It is proved that the picture processing system should be designed in two steps. The first step should, by all means, insure high efficiency in processing but the high capacity is not obligatory. The second step is aimed at higher capacity along with high efficiency. So, such a two-step designing makes it possible to solve the problem of higher capacity and lesser cost of picture processing

  12. Efficiency in Microfinance Cooperatives

    Directory of Open Access Journals (Sweden)

    HARTARSKA, Valentina

    2012-12-01

    Full Text Available In recognition of cooperatives’ contribution to the socio-economic well-being of their participants, the United Nations has declared 2012 as the International Year of Cooperatives. Microfinance cooperatives make a large part of the microfinance industry. We study efficiency of microfinance cooperatives and provide estimates of the optimal size of such organizations. We employ the classical efficiency analysis consisting of estimating a system of equations and identify the optimal size of microfinance cooperatives in terms of their number of clients (outreach efficiency, as well as dollar value of lending and deposits (sustainability. We find that microfinance cooperatives have increasing returns to scale which means that the vast majority can lower cost if they become larger. We calculate that the optimal size is around $100 million in lending and half of that in deposits. We find less robust estimates in terms of reaching many clients with a range from 40,000 to 180,000 borrowers.

  13. Efficient Learning Design

    DEFF Research Database (Denmark)

    Godsk, Mikkel

    This paper presents the current approach to implementing educational technology with learning design at the Faculty of Science and Technology, Aarhus University, by introducing the concept of ‘efficient learning design’. The underlying hypothesis is that implementing learning design is more than...... engaging educators in the design process and developing teaching and learning, it is a shift in educational practice that potentially requires a stakeholder analysis and ultimately a business model for the deployment. What is most important is to balance the institutional, educator, and student...... perspectives and to consider all these in conjunction in order to obtain a sustainable, efficient learning design. The approach to deploying learning design in terms of the concept of efficient learning design, the catalyst for educational development, i.e. the learning design model and how it is being used...

  14. Measuring efficiency in logistics

    Directory of Open Access Journals (Sweden)

    Milan Milovan Andrejić

    2013-06-01

    Full Text Available Dynamic market and environmental changes greatly affect operating of logistics systems. Logistics systems have to realize their activities and processes in an efficient way. The main objective of this paper is to analyze different aspects of efficiency measurement in logistics and to propose appropriate models of measurement. Measuring efficiency in logistics is a complex process that requires consideration of all subsystems, processes and activities as well as the impact of various financial, operational, environmental, quality and other factors. The proposed models have a basis in the Data Envelopment Analysis method. They could help managers in decision making and corrective actions processes. The tests and results of the model show the importance of input and output variables selection.

  15. Bandwidth efficient coding

    CERN Document Server

    Anderson, John B

    2017-01-01

    Bandwidth Efficient Coding addresses the major challenge in communication engineering today: how to communicate more bits of information in the same radio spectrum. Energy and bandwidth are needed to transmit bits, and bandwidth affects capacity the most. Methods have been developed that are ten times as energy efficient at a given bandwidth consumption as simple methods. These employ signals with very complex patterns and are called "coding" solutions. The book begins with classical theory before introducing new techniques that combine older methods of error correction coding and radio transmission in order to create narrowband methods that are as efficient in both spectrum and energy as nature allows. Other topics covered include modulation techniques such as CPM, coded QAM and pulse design.

  16. How do shorter working hours affect employee wellbeing? : Shortening working time in Finland

    OpenAIRE

    Lahdenperä, Netta

    2017-01-01

    The way work is done is dramatically changing due to digital breakthroughs. Generation Y is entering the workforce with a changed attitude towards work as organizations are increasing their focus towards employee wellbeing. Organizations who adopt the new model of work and understand the importance of the wellbeing of their staff are leading the transition to a more efficient business, better working life and a healthier planet. The thesis explores the numerous effects of shorter working...

  17. Financing Energy Efficient Homes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    Existing buildings require over 40% of the world's total final energy consumption, and account for 24% of world CO2 emissions (IEA, 2006). Much of this consumption could be avoided through improved efficiency of building energy systems (IEA, 2006) using current, commercially-viable technology. In most cases, these technologies make economic sense on a life-cycle cost analysis (IEA, 2006b). Moreover, to the extent that they reduce dependence on risk-prone fossil energy sources, energy efficient technologies also address concerns of energy security.

  18. Financing Energy Efficient Homes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    Existing buildings require over 40% of the world's total final energy consumption, and account for 24% of world CO2 emissions (IEA, 2006). Much of this consumption could be avoided through improved efficiency of building energy systems (IEA, 2006) using current, commercially-viable technology. In most cases, these technologies make economic sense on a life-cycle cost analysis (IEA, 2006b). Moreover, to the extent that they reduce dependence on risk-prone fossil energy sources, energy efficient technologies also address concerns of energy security.

  19. The Energy Efficient Enterprise

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, Bashir

    2010-09-15

    Since rising energy costs have become a crucial factor for the economy of production processes, the optimization of energy efficiency is of essential importance for industrial enterprises. Enterprises establish energy saving programs, specific to their needs. The most important elements of these energy efficiency programs are energy savings, energy controlling, energy optimization, and energy management. This article highlights the industrial enterprise approach to establish sustainable energy management programs based on the above elements. Globally, if organizations follow this approach, they can significantly reduce the overall energy consumption and cost.

  20. Dimensions of energy efficiency

    International Nuclear Information System (INIS)

    Ramani, K.V.

    1992-01-01

    In this address the author describes three dimensions of energy efficiency in order of increasing costs: conservation, resource and technology substitution, and changes in economic structure. He emphasizes the importance of economic rather than environmental rationales for energy efficiency improvements in developing countries. These countries do not place high priority on the problems of global climate change. Opportunities for new technologies may exist in resource transfer, new fuels and, possibly, small reactors. More research on economic and social impacts of technologies with greater sensitivity to user preferences is needed

  1. Efficient use of energy

    CERN Document Server

    Dryden, IGC

    2013-01-01

    The Efficient Use of Energy, Second Edition is a compendium of papers discussing the efficiency with which energy is used in industry. The collection covers relevant topics in energy handling and describes the more important features of plant and equipment. The book is organized into six parts. Part I presents the various methods of heat production. The second part discusses the use of heat in industry and includes topics in furnace design, industrial heating, boiler plants, and water treatment. Part III deals with the production of mechanical and electrical energy. It tackles the principles o

  2. Efficient computation of hashes

    International Nuclear Information System (INIS)

    Lopes, Raul H C; Franqueira, Virginia N L; Hobson, Peter R

    2014-01-01

    The sequential computation of hashes at the core of many distributed storage systems and found, for example, in grid services can hinder efficiency in service quality and even pose security challenges that can only be addressed by the use of parallel hash tree modes. The main contributions of this paper are, first, the identification of several efficiency and security challenges posed by the use of sequential hash computation based on the Merkle-Damgard engine. In addition, alternatives for the parallel computation of hash trees are discussed, and a prototype for a new parallel implementation of the Keccak function, the SHA-3 winner, is introduced.

  3. Identification of Design Work Patterns by Retrospective Analysis of Work Sheets

    DEFF Research Database (Denmark)

    Hansen, Claus Thorp

    1999-01-01

    project is carried out where we seek to identify design work patterns by retrospective analysis of documentation created during design projects.An elements to satisfy the wish for an efficient design process could be to identify work patterns applied by engineering designers, evaluate these patterns...... with respect to their efficiency, and reuse the most efficient in future projects. Thus, the objective of this research is to analyse design projects in order to identify the work patterns applied. Based on an evaluation of identified work patterns we expect a recommendation of work patterns supporting...... an efficient design process can be established.In this paper we describe the analysis method, and present observations from analyses of three projects....

  4. M4GB : Efficient Groebner Basis algorithm

    NARCIS (Netherlands)

    R.H. Makarim (Rusydi); M.M.J. Stevens (Marc)

    2017-01-01

    textabstractWe introduce a new efficient algorithm for computing Groebner-bases named M4GB. Like Faugere's algorithm F4 it is an extension of Buchberger's algorithm that describes: how to store already computed (tail-)reduced multiples of basis polynomials to prevent redundant work in the reduction

  5. Cost-efficient staffing under annualized hours

    NARCIS (Netherlands)

    van der Veen, Egbert; Hans, Elias W.; Veltman, Bart; Berrevoets, Leo M.; Berden, Hubert J.J.M.

    2012-01-01

    We study how flexibility in workforce capacity can be used to efficiently match capacity and demand. Flexibility in workforce capacity is introduced by the annualized hours regime. Annualized hours allow organizations to measure working time per year, instead of per month or per week. An additional

  6. Efficient GPU-based skyline computation

    DEFF Research Database (Denmark)

    Bøgh, Kenneth Sejdenfaden; Assent, Ira; Magnani, Matteo

    2013-01-01

    The skyline operator for multi-criteria search returns the most interesting points of a data set with respect to any monotone preference function. Existing work has almost exclusively focused on efficiently computing skylines on one or more CPUs, ignoring the high parallelism possible in GPUs. In...

  7. Corporate efficiency in Europe

    Czech Academy of Sciences Publication Activity Database

    Hanousek, Jan; Kočenda, E.; Shamshur, Anastasiya

    2015-01-01

    Roč. 32, June (2015), s. 24-40 ISSN 0929-1199 R&D Projects: GA ČR(CZ) GA15-15927S Institutional support: PRVOUK-P23 Keywords : efficiency * ownership structure * firms Subject RIV: AH - Economics Impact factor: 1.286, year: 2015

  8. Robust efficient video fingerprinting

    Science.gov (United States)

    Puri, Manika; Lubin, Jeffrey

    2009-02-01

    We have developed a video fingerprinting system with robustness and efficiency as the primary and secondary design criteria. In extensive testing, the system has shown robustness to cropping, letter-boxing, sub-titling, blur, drastic compression, frame rate changes, size changes and color changes, as well as to the geometric distortions often associated with camcorder capture in cinema settings. Efficiency is afforded by a novel two-stage detection process in which a fast matching process first computes a number of likely candidates, which are then passed to a second slower process that computes the overall best match with minimal false alarm probability. One key component of the algorithm is a maximally stable volume computation - a three-dimensional generalization of maximally stable extremal regions - that provides a content-centric coordinate system for subsequent hash function computation, independent of any affine transformation or extensive cropping. Other key features include an efficient bin-based polling strategy for initial candidate selection, and a final SIFT feature-based computation for final verification. We describe the algorithm and its performance, and then discuss additional modifications that can provide further improvement to efficiency and accuracy.

  9. Efficient Immutable Collections

    NARCIS (Netherlands)

    Steindorfer, M.J.

    2017-01-01

    This thesis proposes novel and efficient data structures, suitable for immutable collection libraries, that carefully balance memory footprint and runtime performance of operations, and are aware of constraints and platform co-design challenges on the Java Virtual Machine (JVM). Collection data

  10. Efficient XPath Evaluation

    NARCIS (Netherlands)

    Wang, B.; Feng, L.; Shen, Y.

    Inspired by the best querying performance of ViST among the rest of the approaches in the literature, and meanwhile to overcome its shortcomings, in this paper, we present another efficient and novel geometric sequence mechanism, which transforms XML documents and XPath queries into the

  11. ERP=Efficiency

    Science.gov (United States)

    Violino, Bob

    2008-01-01

    This article discusses the enterprise resource planning (ERP) system. Deploying an ERP system is one of the most extensive--and expensive--IT projects a college or university can undertake. The potential benefits of ERP are significant: a more smoothly running operation with efficiencies in virtually every area of administration, from automated…

  12. Microeconomics : Equilibrium and Efficiency

    NARCIS (Netherlands)

    Ten Raa, T.

    2013-01-01

    Microeconomics: Equilibrium and Efficiency teaches how to apply microeconomic theory in an innovative, intuitive and concise way. Using real-world, empirical examples, this book not only covers the building blocks of the subject, but helps gain a broad understanding of microeconomic theory and

  13. Fuzzy efficiency without convexity

    DEFF Research Database (Denmark)

    Hougaard, Jens Leth; Balezentis, Tomas

    2014-01-01

    approach builds directly upon the definition of Farrell's indexes of technical efficiency used in crisp FDH. Therefore we do not require the use of fuzzy programming techniques but only utilize ranking probabilities of intervals as well as a related definition of dominance between pairs of intervals. We...

  14. Institutions, Equilibria and Efficiency

    DEFF Research Database (Denmark)

    Competition and efficiency is at the core of economic theory. This volume collects papers of leading scholars, which extend the conventional general equilibrium model in important ways. Efficiency and price regulation are studied when markets are incomplete and existence of equilibria in such set......Competition and efficiency is at the core of economic theory. This volume collects papers of leading scholars, which extend the conventional general equilibrium model in important ways. Efficiency and price regulation are studied when markets are incomplete and existence of equilibria...... in such settings is proven under very general preference assumptions. The model is extended to include geographical location choice, a commodity space incorporating manufacturing imprecision and preferences for club-membership, schools and firms. Inefficiencies arising from household externalities or group...... membership are evaluated. Core equivalence is shown for bargaining economies. The theory of risk aversion is extended and the relation between risk taking and wealth is experimentally investigated. Other topics include: determinacy in OLG with cash-in-advance constraints, income distribution and democracy...

  15. Web anonymization efficiency study

    Science.gov (United States)

    Sochor, Tomas

    2017-11-01

    The analysis of TOR, JonDo and CyberGhost efficiency (measured the as latency increase and transmission speed decrease) is presented in the paper. Results showed that all tools have relatively favorable latency increase (no more than 60% RTT increase). The transmission speed increase was much more significant (more than 60%), and even more for JonDo (above 90%).

  16. Energy efficiency in Finland

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    In Finland a significant portion of energy originates from renewable sources and cogeneration, that is, combined production of electricity and heat. Combined heat and electricity production is typical in the Finnish industry and in the district heating sector. One third of all electricity and 15 % of district heating is produced by cogeneration. District heating schemes provide about 45 % of heat in buildings. Overall efficiency in industry exceeds 80 % and is even higher in the district heating sector. In 1996 25 % of Finland`s primary energy was produced from renewable energy sources which is a far higher proportion than the European Union average of 6 %. Finland is one of the leading users of bioenergy. Biomass including peat, provides approximately 50 % of fuel consumed by industry and is utilised in significant amounts in combined heat and electricity plants. For example, in the pulp and paper industry, by burning black liquor and bark during the production of chemical pulp, significant amounts of energy are generated and used in paper mills. Conservation and efficient use of energy are central to the Finnish Government`s Energy Strategy. The energy conservation programme aims to increase energy efficiency by 10-20 % by the year 2010. Energy saving technology plays a key role in making the production and use of energy more efficient. In 1996 of FIM 335 million (ECU 57 million) spent on funding research, FIM 120 million (ECU 20 million) was spent on research into energy conservation

  17. Cataloging Efficiency and Effectiveness.

    Science.gov (United States)

    McCain, Cheryl; Shorten, Jay

    2002-01-01

    Reports on a survey of academic libraries that was conducted to supplement findings of cost studies by providing measures of efficiency and effectiveness for cataloging departments based on reported productivity, number of staff, task distribution, and quality measures including backlogs, authority control, and database maintenance. Identifies…

  18. Jet Inlet Efficiency

    Science.gov (United States)

    2013-08-08

    AFRL-RW-EG-TR-2014-044 Jet Inlet Efficiency Nigel Plumb Taylor Sykes-Green Keith Williams John Wohleber Munitions Aerodynamics Sciences...CONTRACT NUMBER N/A 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER N/A 6. AUTHOR(S) Nigel Plumb Taylor Sykes-Green Keith Williams John

  19. An efficiency correction model

    NARCIS (Netherlands)

    Francke, M.K.; de Vos, A.F.

    2009-01-01

    We analyze a dataset containing costs and outputs of 67 American local exchange carriers in a period of 11 years. This data has been used to judge the efficiency of BT and KPN using static stochastic frontier models. We show that these models are dynamically misspecified. As an alternative we

  20. Higher Efficiency HVAC Motors

    Energy Technology Data Exchange (ETDEWEB)

    Flynn, Charles Joseph [QM Power, Inc., Kansas City, MO (United States)

    2018-02-13

    The objective of this project was to design and build a cost competitive, more efficient heating, ventilation, and air conditioning (HVAC) motor than what is currently available on the market. Though different potential motor architectures among QMP’s primary technology platforms were investigated and evaluated, including through the building of numerous prototypes, the project ultimately focused on scaling up QM Power, Inc.’s (QMP) Q-Sync permanent magnet synchronous motors from available sub-fractional horsepower (HP) sizes for commercial refrigeration fan applications to larger fractional horsepower sizes appropriate for HVAC applications, and to add multi-speed functionality. The more specific goal became the research, design, development, and testing of a prototype 1/2 HP Q-Sync motor that has at least two operating speeds and 87% peak efficiency compared to incumbent electronically commutated motors (EC or ECM, also known as brushless direct current (DC) motors), the heretofore highest efficiency HVACR fan motor solution, at approximately 82% peak efficiency. The resulting motor prototype built achieved these goals, hitting 90% efficiency and .95 power factor at full load and speed, and 80% efficiency and .7 power factor at half speed. Q-Sync, developed in part through a DOE SBIR grant (Award # DE-SC0006311), is a novel, patented motor technology that improves on electronically commutated permanent magnet motors through an advanced electronic circuit technology. It allows a motor to “sync” with the alternating current (AC) power flow. It does so by eliminating the constant, wasteful power conversions from AC to DC and back to AC through the synthetic creation of a new AC wave on the primary circuit board (PCB) by a process called pulse width modulation (PWM; aka electronic commutation) that is incessantly required to sustain motor operation in an EC permanent magnet motor. The Q-Sync circuit improves the power factor of the motor by removing all

  1. Entanglement verification with detection efficiency mismatch

    Science.gov (United States)

    Zhang, Yanbao; Lütkenhaus, Norbert

    Entanglement is a necessary condition for secure quantum key distribution (QKD). When there is an efficiency mismatch between various detectors used in the QKD system, it is still an open problem how to verify entanglement. Here we present a method to address this problem, given that the detection efficiency mismatch is characterized and known. The method works without assuming an upper bound on the number of photons going to each threshold detector. Our results suggest that the efficiency mismatch affects the ability to verify entanglement: the larger the efficiency mismatch is, the smaller the set of entangled states that can be verified becomes. When there is no mismatch, our method can verify entanglement even if the method based on squashing maps [PRL 101, 093601 (2008)] fails.

  2. Incentives – Effectiveness and efficiency

    Directory of Open Access Journals (Sweden)

    Björn Hinderlich

    2014-03-01

    Full Text Available This paper covers the question if and how incentive schemes work evaluated by their impact on company performance (market capitalization and profit before tax. Based on a unique data set for German executive directors of DAX companies it can be proved that neither short (STI nor long term incentives (LTI plans necessarily support the company success. It rather depends on the efficiency of each plan, i. e. on its design. Special attention has to be paid on target setting. Short term focused objectives often miss their targets, whereas long term oriented objectives significantly support the company success. To solve the prisoner’s dilemma between employers and employees by a quasi-endless game, additional measures may be helpful, such as share ownership guidelines.

  3. Efficient Intra-Household Allocations

    DEFF Research Database (Denmark)

    Browning, Martin

    demands must satisfy a symmetry and rank condition on the Slutsky matrix. We also present some further results on the effects on demands of variables that do nor modify preferences but that do affect how decisions are made. We apply our theory to a series of surveys of household expendityres from Canada......The neo-classical theory of demand applies to individuals yet in empirical work it is usually taken as valid for households with many members. This paper explores what the theory of individuals implies for households with many members. This paper explores what the theory of individuals implies...... for households which have more than one member. We make minimal assumptions about how the individual members of the household resolve conflicts. All we assume is that however decisions are made, outcomes are efficient. We refer to this as the collective setting. We show that in the collective setting household...

  4. Energy efficiency in the foreground

    International Nuclear Information System (INIS)

    Baettig, I.

    2006-01-01

    In this interview with Eberhard Jochem, professor at the Centre for Energy Policy and Economics at the Federal Institute of Science and Technology (ETH) in Zurich, Switzerland, several energy-relevant topics are discussed. These include high oil prices, possible power shortages and binding commitments in the climate-protection area. The question is asked, how, in consideration of such general conditions, energy use and energy supply should develop in Switzerland. Options for increasing efficiency or the tapping of new energy sources is discussed, as is Switzerland's increasing energy consumption. The '2000 Watt' concept being worked on at the ETH and the activities needed for its realisation are discussed. The effects of this concept on economical and business development are discussed. The potential of renewable forms of energy and the possibility of building combined gas and steam power stations are looked at. Ways of promoting renewable energy and questions concerning the extent of the state intervention in the energy business are considered

  5. Working Memory Intervention: A Reading Comprehension Approach

    Science.gov (United States)

    Perry, Tracy L.; Malaia, Evguenia

    2013-01-01

    For any complex mental task, people rely on working memory. Working memory capacity (WMC) is one predictor of success in learning. Historically, attempts to improve verbal WM through training have not been effective. This study provided elementary students with WM consolidation efficiency training to answer the question, Can reading comprehension…

  6. Energy-Efficient Neuromorphic Classifiers.

    Science.gov (United States)

    Martí, Daniel; Rigotti, Mattia; Seok, Mingoo; Fusi, Stefano

    2016-10-01

    Neuromorphic engineering combines the architectural and computational principles of systems neuroscience with semiconductor electronics, with the aim of building efficient and compact devices that mimic the synaptic and neural machinery of the brain. The energy consumptions promised by neuromorphic engineering are extremely low, comparable to those of the nervous system. Until now, however, the neuromorphic approach has been restricted to relatively simple circuits and specialized functions, thereby obfuscating a direct comparison of their energy consumption to that used by conventional von Neumann digital machines solving real-world tasks. Here we show that a recent technology developed by IBM can be leveraged to realize neuromorphic circuits that operate as classifiers of complex real-world stimuli. Specifically, we provide a set of general prescriptions to enable the practical implementation of neural architectures that compete with state-of-the-art classifiers. We also show that the energy consumption of these architectures, realized on the IBM chip, is typically two or more orders of magnitude lower than that of conventional digital machines implementing classifiers with comparable performance. Moreover, the spike-based dynamics display a trade-off between integration time and accuracy, which naturally translates into algorithms that can be flexibly deployed for either fast and approximate classifications, or more accurate classifications at the mere expense of longer running times and higher energy costs. This work finally proves that the neuromorphic approach can be efficiently used in real-world applications and has significant advantages over conventional digital devices when energy consumption is considered.

  7. Balancing Machine Work, Comfort Work, and Sentimental Work

    DEFF Research Database (Denmark)

    Pedersen, Maria Ie; Hansen, Magnus; Hertzum, Morten

    2011-01-01

    and attention. We investigate ambulance care in three of Denmark’s five healthcare regions, which staff ambulances with emergency medical technicians, paramedics, and physicians. Using the concept of illness trajectory we analyse how the ambulance crews balance machine work, which involves continuously...... monitoring the equipment, comfort work, which is actions taken to relieve the pain or discomfort of the patient, and sentimental work, which is care for the patient’s physical and mental well-being, often verbal in nature. The analysis shows that comfort and sentimental work often takes priority over machine...... work, but also that this has negative consequences. Equipment for use in ambulances should aim at supporting the ambulance crews in competently and dynamically balancing the different types of work and should, consequently, avoid binding the crew’s attention for unbroken periods of time....

  8. Efficiency and Logistics

    CERN Document Server

    Hompel, Michael; Klumpp, Matthias

    2013-01-01

    The „EffizienzCluster LogistikRuhr“ was a winner in the Leading Edge Science Cluster competition run by the German federal Ministry of Education and Research. The mission and aim of the „EffizienzCluster LogistikRuhr“ is to facilitate tomorrow’s individuality – in the sense of individual goods supply, mobility, and production – using 75 percent of today’s resources. Efficiency – both in economical and ecological terms – is enabled by state-of-the-art and innovative logistical solutions including transportation, production and intralogistics. These proceedings “Efficiency and Logistics” give first answers from 27 research projects as an insight into the current state of research of Europe’s leading research and development cluster in logistics and as a contribution to the discussion on how logistics as a science can help to cope with foreseeable resource shortage and sustainability as global challenges.

  9. Danish Energy Efficiency Policy

    DEFF Research Database (Denmark)

    Togeby, Mikael; Larsen, Anders; Dyhr-Mikkelsen, Kirsten

    2009-01-01

    Ten groups of policy instruments for promoting energy efficiency are actively used in Denmark. Among these are the EU instruments such as the CO2 emissions trading scheme and labelling of appliances, labelling of all buildings, combined with national instruments such as high taxes especially...... of the entire Danish energy efficiency policy portfolio must be carried out before end 2008 and put forward for discussion among governing parties no later than February 2009. A consortium comprising Ea Energy Analyses, Niras, the Department of Society and Globalisation (Roskilde University) and 4-Fact...... on households and the public sector, obligations for energy companies (electricity, natural gas, district heating, and oil) to deliver documented savings, strict building codes, special instructions for the public sector, and an Electricity Saving Trust. A political agreement from 2005 states that an evaluation...

  10. Energy efficiency system development

    Science.gov (United States)

    Leman, A. M.; Rahman, K. A.; Chong, Haw Jie; Salleh, Mohd Najib Mohd; Yusof, M. Z. M.

    2017-09-01

    By subjecting to the massive usage of electrical energy in Malaysia, energy efficiency is now one of the key areas of focus in climate change mitigation. This paper focuses on the development of an energy efficiency system of household electrical appliances for residential areas. Distribution of Questionnaires and pay a visit to few selected residential areas are conducted during the fulfilment of the project as well as some advice on how to save energy are shared with the participants. Based on the collected data, the system developed by the UTHM Energy Team is then evaluated from the aspect of the consumers' behaviour in using electrical appliances and the potential reduction targeted by the team. By the end of the project, 60% of the participants had successfully reduced the electrical power consumption set by the UTHM Energy Team. The reasons for whether the success and the failure is further analysed in this project.

  11. Negotiating Efficient PPP Contracts

    DEFF Research Database (Denmark)

    Tvarnø, Christina D.

    . An opportunity the member states should consider using when procuring a PPP. This paper looks at the negotiation and contracting of a PPP in an economic theoretical and EU public procurement perspective and discusses how to establish an efficient PPP contract under a strong public law doctrine. Governments......This paper concerns Public Private Partnership (PPP) contracts in concern to the coming new 2014/24IEU public procurement directive. The new EU public procurement directive gives the public authority the opportunity to negotiate PPPs much more when they are implemented in national law...... procurement law. Furthermore, the paper seeks to establish a connection between public law, private law and the efficient PPP contract by drawing upon economic theory and empirical contract data from UK, US and Danish partnering contracts from the construction industry and the aim of contracting joint utility...

  12. Finite-size effect on optimal efficiency of heat engines.

    Science.gov (United States)

    Tajima, Hiroyasu; Hayashi, Masahito

    2017-07-01

    The optimal efficiency of quantum (or classical) heat engines whose heat baths are n-particle systems is given by the strong large deviation. We give the optimal work extraction process as a concrete energy-preserving unitary time evolution among the heat baths and the work storage. We show that our optimal work extraction turns the disordered energy of the heat baths to the ordered energy of the work storage, by evaluating the ratio of the entropy difference to the energy difference in the heat baths and the work storage, respectively. By comparing the statistical mechanical optimal efficiency with the macroscopic thermodynamic bound, we evaluate the accuracy of the macroscopic thermodynamics with finite-size heat baths from the statistical mechanical viewpoint. We also evaluate the quantum coherence effect on the optimal efficiency of the cycle processes without restricting their cycle time by comparing the classical and quantum optimal efficiencies.

  13. Carbon Efficient Building Solutions

    Directory of Open Access Journals (Sweden)

    Pellervo Matilainen

    2010-03-01

    Full Text Available Traditionally, the Finnish legislation have focused on energy use and especially on energy used for heating space in buildings. However, in many cases this does not lead to the optimal concept in respect to minimizing green house gases. This paper studies how CO2 emission levels are affected by different measures to reduce energy use in buildings. This paper presents two real apartment buildings with different options of energy efficiency and power sources. The calculations clearly show that in the future electricity and domestic hot water use will have high importance in respect to energy efficiency, and therefore also CO2 equivalent (eq emissions. The importance increases when the energy efficiency of the building increases. There are big differences between average Finnish production and individual power plants; CO2 eq emissions might nearly double depending on the energy source and the power plant type. Both a building with an efficient district heating as a power source, and a building with ground heat in addition to nuclear power electricity as a complimentary electricity source performed very similarly to each other in respect to CO2 eq emissions. However, it is dangerous to conclude that it is not important which energy source is chosen. If hypothetically, the use of district heating would dramatically drop, the primary energy factor and CO2 eq emissions from electricity would rise, which in turn would lead to the increase of the ground heat systems emissions. A problem in the yearly calculations is that the fact that it is very important, sometimes even crucial, when energy is needed, is always excluded.

  14. Comminution efficiency attracts attention

    International Nuclear Information System (INIS)

    Daniel, M.J.; Lewis-Gray, E.

    2011-01-01

    The mining sector, both at a technical and board level is pursuing opportunities to achieve cost savings and reduce energy usage in their operations. Research and debate on step change efficiency benefits is particularly evident in the field of comminution (crushing and grinding) circuit design and operation. Published literature that quantifies mining related energy consumption in South Africa and Australia has been reviewed by the authors.

  15. Efficient Fingercode Classification

    Science.gov (United States)

    Sun, Hong-Wei; Law, Kwok-Yan; Gollmann, Dieter; Chung, Siu-Leung; Li, Jian-Bin; Sun, Jia-Guang

    In this paper, we present an efficient fingerprint classification algorithm which is an essential component in many critical security application systems e. g. systems in the e-government and e-finance domains. Fingerprint identification is one of the most important security requirements in homeland security systems such as personnel screening and anti-money laundering. The problem of fingerprint identification involves searching (matching) the fingerprint of a person against each of the fingerprints of all registered persons. To enhance performance and reliability, a common approach is to reduce the search space by firstly classifying the fingerprints and then performing the search in the respective class. Jain et al. proposed a fingerprint classification algorithm based on a two-stage classifier, which uses a K-nearest neighbor classifier in its first stage. The fingerprint classification algorithm is based on the fingercode representation which is an encoding of fingerprints that has been demonstrated to be an effective fingerprint biometric scheme because of its ability to capture both local and global details in a fingerprint image. We enhance this approach by improving the efficiency of the K-nearest neighbor classifier for fingercode-based fingerprint classification. Our research firstly investigates the various fast search algorithms in vector quantization (VQ) and the potential application in fingerprint classification, and then proposes two efficient algorithms based on the pyramid-based search algorithms in VQ. Experimental results on DB1 of FVC 2004 demonstrate that our algorithms can outperform the full search algorithm and the original pyramid-based search algorithms in terms of computational efficiency without sacrificing accuracy.

  16. Efficient Non Linear Loudspeakers

    DEFF Research Database (Denmark)

    Petersen, Bo R.; Agerkvist, Finn T.

    2006-01-01

    Loudspeakers have traditionally been designed to be as linear as possible. However, as techniques for compensating non linearities are emerging, it becomes possible to use other design criteria. This paper present and examines a new idea for improving the efficiency of loudspeakers at high levels...... by changing the voice coil layout. This deliberate non-linear design has the benefit that a smaller amplifier can be used, which has the benefit of reducing system cost as well as reducing power consumption....

  17. Efficient HVAC. New products

    International Nuclear Information System (INIS)

    2016-01-01

    Jung is responding to the challenge of energy efficiency, ease of operation and economic profitability in all of its solutions for the tertiary sector, whether for newly constructed buildings or refurbishments, for full management of the electrical system or the partial control of lighting, HVAC, mood settings, access control, etc., for the bedrooms or specific areas of the building. In the specific case of hotels, Jung offers each a custom-made solution in line with its possibilities and objectives. (Author)

  18. Working conditions, work style, and job satisfaction among Albanian teachers

    Science.gov (United States)

    Kloep, Marion; Tarifa, Fatos

    1994-03-01

    For the first time in Albania, a large-scale study investigating teachers' working conditions was conducted. 349 teachers from many parts of the country and from all school levels answered an extensive questionnaire, providing a comprehensive description of their working situation. As data for parts of the study exist from the USA, Germany, Singapore, England, and Poland, results could be discussed in comparison to the conditions in these countries, showing that self-reported job satisfaction and engagement in effective classroom practices is relatively high among Albanian teachers, while the economic and physical conditions are bad. Stepwise regression analyses reveal that the items measuring professional autonomy account for a considerable part of the variance of the job satisfaction measure; while work efficiency is mainly predicted by items measuring social support and, again, professional autonomy.

  19. [Investigating work, age, health and work participation in the ageing work force in Germany].

    Science.gov (United States)

    Ebener, M; Hasselhorn, H M

    2015-04-01

    Working life in Germany is changing. The work force is ageing and the number of people available to the labour market will - from now on - shrink considerably. Prospectively, people will have to work longer; but still today, most people leave employment long before reaching official retirement age. What are the reasons for this? In this report, a conceptual framework and the German lidA Cohort Study are presented. The "lidA conceptual framework on work, age, health and work participation" visualises determinants of employment (11 "domains") in higher working age, e. g., "work", "health", "social status" and "life style". The framework reveals 4 key characteristics of withdrawal from work: leaving working life is the result of an interplay of different domains (complexity); (early) retirement is a process with in part early determinants in the life course (processual character); retirement has a strong individual component (individuality); retirement is embedded in a strong structural frame (structure). On the basis of this framework, the "lidA Cohort Study on work, age, health and work participation" (www.lida-studie.de) investigates long-term effects of work on health and work participation in the ageing work force in Germany. It is the only large study in Germany operationalising the concept of employability in a broad interdisciplinary approach. Employees subject to social security and born in 1959 or in 1965 will be interviewed (CAPI) every 3 years (N[wave 1]=6 585, N[wave 2]=4 244) and their data will be linked (where consented) with social security data covering employment history and with health insurance data. The study design ("Schaie's most efficient design") allows for a tri-factor model that isolates the impact of age, cohort and time. In 2014, the second wave was completed. In the coming years lidA will analyse the association of work, health and work participation, and identify age as well as generation differences. lidA will investigate the

  20. Economics of appliance efficiency

    International Nuclear Information System (INIS)

    Tiedemann, K.H.

    2009-01-01

    Several significant developments occurred in 2001 that affect the impact of market transformation programs. This paper presented and applied an econometric approach to the identification and estimation of market models for refrigerators, clothes washers, dishwashers and room air conditioners. The purpose of the paper was to understand the impact of energy conservation policy developments on sales of energy efficient appliances. The paper discussed the approach with particular reference to building a database of sales and drivers of sales using publicly available information; estimation of the determinants of sales using econometric models; and estimation of the individual impacts of prices, gross domestic product (GDP) and energy conservation policies on sales using regression results. Market and policy developments were also presented, such as change a light, save the world promotion; the California energy crisis; and the Pacific Northwest drought induced hydro power shortage. It was concluded that an increase in GDP increased the sales of both more efficient and less efficient refrigerators, clothes washers, dishwashers, and room air conditioners. An increase in electricity price increased sales of Energy Star refrigerators, clothes washers, dishwashers, and room air conditioners. 4 refs., 8 tabs.

  1. Work organisation, technology and working conditions

    OpenAIRE

    Dhondt, S.; Kraan, K.; Sloten, G. van

    2002-01-01

    The personal computer, computer networks and the Internet have brought the Union into the Information Age. These technological changes have inevitably led to changes in the work environment and the quality of working conditions. For the third time, the European Foundation for the Improvement of Living and Working Conditions has carried out a questionnaire-based survey on working conditions throughout the European Union, covering all Member States. Previous surveys were carried out in 1991 and...

  2. New ways of working and work engagement

    NARCIS (Netherlands)

    Baudewijns, C.; Gerards, R.; de Grip, A.

    2015-01-01

    This article investigates whether New Ways of Working (NWW) are related to employee work engagement in the Netherlands. We test our hypotheses using a sample of 656 employees from 14 industry sectors and 12 occupational fields. Our study reveals that three facets of NWW positively affect work

  3. Work-family conflicts and work performance.

    Science.gov (United States)

    Roth, Lawrence; David, Emily M

    2009-08-01

    Prior research indicates that work-family conflict interferes with family far more than it interferes with work. Conservation of resources provides a possible explanation: when shifting resources from family is no longer sufficient to maintain satisfactory work performance, then workers must acquire additional resources or reduce investments in work. One source of such additional resources could be high performance peers in the work group. The performance of workers with resource-rich peers may be less adversely affected by work-family conflict. In this study, 136 employees of a wholesale distribution firm (61% women, 62% minority) working in groups of 7 to 11 in manual labor and low-level administrative jobs rated their own work-to-family conflict. Their supervisors rated workers' performance. Hierarchical regression analysis indicated that work-to-family conflict increasingly adversely affected job performance as work group performance decreased. Hence, work group performance may be an important moderator of the effects of work-family conflict.

  4. Work Cultures and Work/Family Balance.

    Science.gov (United States)

    Clark, Sue Campbell

    2001-01-01

    For 179 workers with family responsibilities, flexibility of work was associated with job satisfaction and family well-being, flexible work schedules were not. Supportive supervision was associated only with increased employee citizenship and did not increase work-family balance of those at risk. Family-friendly culture did not appear to benefit…

  5. Energy efficiency fallacies revisited

    International Nuclear Information System (INIS)

    Brookes, Leonard

    2000-01-01

    A number of governments including that of the UK subscribe to the belief that a national program devoted to raising energy efficiency throughout the economy provides a costless - indeed profitable - route to meeting international environmental obligations. This is a seductive policy. It constitutes the proverbial free lunch - not only avoiding politically unpopular measures like outlawing, taxing or rationing offending fuels or expanding non-carboniferous sources of energy like nuclear power but doing so with economic benefit. The author of this contribution came to doubt the validity of this solution when it was offered as a way of mitigating the effect of the OPEC price hikes of the 1970s, maintaining that economically justified improvement in energy efficiency led to higher levels of energy consumption at the economy-wide level than in the absence of any efficiency response. More fundamentally, he argues that there is no case for preferentially singling out energy, from among all the resources available to us, for efficiency maximisation. The least damaging policy is to determine targets, enact the restrictive measures needed to curb consumption, and then leave it to consumers - intermediate and final - to reallocate all the resources available to them to best effect subject to the new enacted constraints and any others they might be experiencing. There is no reason to suppose that it is right for all the economic adjustment following a new resource constraint to take the form of improvements in the productivity of that resource alone. As many others have argued, any action to impose resource constraint entails an inevitable economic cost in the shape of a reduction in production and consumption possibilities: there would be no free lunch. In the last few years debate about the validity of these contentions has blossomed, especially under the influence of writers on the western side of the Atlantic. In this contribution the author outlines the original arguments

  6. Power-Efficient Design Challenges

    Science.gov (United States)

    Pangrle, Barry

    Design teams find themselves facing decreasing power budgets while simultaneously the products that they design continue to require the integration of increasingly complex levels of functionality. The market place (driven by consumer preferences) and new regulations and guidelines on energy efficiency and environmental impact are the key drivers. This in turn has generated new approaches in all IC and electronic system design domains from the architecture to the physical layout of ICs, to design-for-test, as well as for design verification to insure that the design implementation actually meets the intended requirements and specifications. This chapter covers key aspects of these forces from a technological and market perspective that are driving designers to produce more energy-efficient products. Observations by significant industry leaders from AMD, ARM, IBM, Intel, nVidia and TSMC are cited, and the emerging techniques and technologies used to address these issues now and into the future are explored. Topic areas include: System level: Architectural analysis and transaction-level modeling. How architectural decisions can dramatically reduce the design power and the importance of modeling hardware and software together. IC (Chip) level: The impact of creating on-chip power domains for selectively turning power off and/or multi-voltage operation on: (1) chip verification, (2) multi-corner multi-mode analysis during placement and routing of logic cells and (3) changes to design-for-test, all in order to accommodate for power-gating and multi-voltage control logic, retention registers, isolation cells and level shifters needed to implement these power saving techniques. Process level: The disappearing impact of body-bias techniques on leakage control and why new approaches like High-K Metal Gate (HKMG) technology help but don't eliminate power issues. Power-efficient design is impacting the way chip designers work today, and this chapter focuses on where the most

  7. Calculation of the efficiency of accounting outsourcing

    Directory of Open Access Journals (Sweden)

    H.I. Liakhovych

    2018-04-01

    Full Text Available To ensure the best performance, enterprises pass on individual business processes for outsourcing. However, the implementation of this step requires an assessment of the effectiveness of such actions. The purpose of the article is to analyze the approaches to assessing the effectiveness of accounting outsourcing and to develop proposals for its methodology, taking into account the main goal of reducing transaction costs. The article defines the composition of the elements of the cost of maintaining accounting in the enterprise. It is proved that the efficiency of accounting outsourcing should be considered in two aspects: 1 it is related to economic efficiency (saving of internal resources of the enterprise due to the transfer of business processes for accounting on outsourcing; 2 is related to the efficiency of the outsourcer's work and the uninterrupted functioning of the enterprise that has taken advantage of outsourcing services. In order to assess the efficiency of the company's services, the outsourcer proposes to use a methodology that takes into account the indicators: the timeliness of the execution of works and the provision of services in accordance with the terms of the contract on outsourcing; completeness of performance of works and provision of services in accordance with the terms of the contract on outsourcing.

  8. High efficiency focus neutron generator

    Science.gov (United States)

    Sadeghi, H.; Amrollahi, R.; Zare, M.; Fazelpour, S.

    2017-12-01

    In the present paper, the new idea to increase the neutron yield of plasma focus devices is investigated and the results are presented. Based on many studies, more than 90% of neutrons in plasma focus devices were produced by beam target interactions and only 10% of them were due to thermonuclear reactions. While propounding the new idea, the number of collisions between deuteron ions and deuterium gas atoms were increased remarkably well. The COMSOL Multiphysics 5.2 was used to study the given idea in the known 28 plasma focus devices. In this circumstance, the neutron yield of this system was also obtained and reported. Finally, it was found that in the ENEA device with 1 Hz working frequency, 1.1 × 109 and 1.1 × 1011 neutrons per second were produced by D-D and D-T reactions, respectively. In addition, in the NX2 device with 16 Hz working frequency, 1.34 × 1010 and 1.34 × 1012 neutrons per second were produced by D-D and D-T reactions, respectively. The results show that with regards to the sizes and energy of these devices, they can be used as the efficient neutron generators.

  9. Efficient total synthesis of (S)-14-azacamptothecin.

    Science.gov (United States)

    Liu, Guan-Sai; Yao, Yuan-Shan; Xu, Peng; Wang, Shaozhong; Yao, Zhu-Jun

    2010-06-01

    An efficient total synthesis of (S)-14-azacamptothecin has been accomplished in 10 steps and 56% overall yield from 5H-pyrano[4,3-d]pyrimidine 8. A mild Hendrickson reagent-triggered intramolecular cascade cyclization, a highly enantioselective dihydroxylation, and an efficient palladium-catalyzed transformation of an O-allyl into N-allyl group are the key steps in the synthesis. This work provides a much higher overall yield than the previous achievement and shows sound flexibility for the further applications that will lead to new bioactive analogues.

  10. A treatment of thermal efficiency improvement in the Brayton cycle

    International Nuclear Information System (INIS)

    Fujii, Terushige; Akagawa, Koji; Nakanishi, Shigeyasu; Inoue, Kiyoshi; Ishigai, Seikan.

    1982-01-01

    So far, as the working fluid for power-generating plants, mainly water and air (combustion gas) have been used. In this study, in regeneration and isothermal compression processes being considered as the means for the efficiency improvement in Brayton cycle, the investigation of equivalent graphical presentation method with T-S diagrams, the introduction of the new characteristic number expressing the possibility of thermal efficiency improvement by regeneration, and the investigation of the effect of the difference of working fluid on thermal efficiency were carried out. Next, as the cycle approximately realizing isothermal compression process with condensation process, the super-critical pressure cycle with liquid phase compression was rated, and four working fluids, NH 3 , SO 2 , CO 2 and H 2 O were examined as perfect gas and real gas. The advantage of CO 2 regeneration for the thermal efficiency improvement was clarified by using the dimensionless characteristic number. The graphical presentation of effective work, the thermal efficiency improvement by regeneration, the thermal efficiency improvement by making compression process isothermal, the effect on thermal efficiency due to various factors and working fluids, the characteristic number by regeneration, and the application to real working fluids are reported. (Kako, I.)

  11. Thermodynamic equipartition for increased second law efficiency

    International Nuclear Information System (INIS)

    Thiel, Gregory P.; McGovern, Ronan K.; Zubair, Syed M.; Lienhard V, John H.

    2014-01-01

    Highlights: • Efficiency gains from equipartition to minimize entropy generation are quantified. • The equipartition factor (Ξ) quantifies the variance of thermodynamic affinities. • Systems with low (Ξ) and low efficiency gain most when redesigned for equipartition. • For lumped capacitance systems long normalized charging times correlate with low (Ξ). - Abstract: In this work, a clear distinction is drawn between irreversibility associated with a finite mean driving force in a transport process and irreversibility associated with variance in the spatial and/or temporal distribution of this driving force. The portion of irreversibility associated with driving force variance is quantified via a newly defined dimensionless quantity, the equipartition factor. This equipartition factor, related to the variance in dimensionless driving force throughout the system, is employed to formulate an expression for second law efficiency. Consequently, the equipartition factor may be employed to identify the improvement in efficiency achievable via system redesign for a reduction in driving force variance, while holding fixed the system output for fixed system dimensions in time and space. It is shown that systems with low second law efficiency and low equipartition factor will have the greatest benefit from a redesign to obtain equipartition. The utility of the equipartition factor in identifying situations where efficiency can be increased without requiring a spatial or temporal increase in system size is illustrated through its application to several simple systems

  12. Efficiency model of Russian banks

    OpenAIRE

    Pavlyuk, Dmitry

    2006-01-01

    The article deals with problems related to the stochastic frontier model of bank efficiency measurement. The model is used to study the efficiency of the banking sector of The Russian Federation. It is based on the stochastic approach both to the efficiency frontier location and to individual bank efficiency values. The model allows estimating bank efficiency values, finding relations with different macro- and microeconomic factors and testing some economic hypotheses.

  13. Energy Efficient Task Light

    DEFF Research Database (Denmark)

    Logadottir, Asta; Ardkapan, Siamak Rahimi; Johnsen, Kjeld

    2014-01-01

    The objectives of this work is to develop a task light for office lighting that fulfils the minimum requirements of the European standard EN12464 - 1 : Light and lighting – Lighting of work places, Part 1: Indoor workplaces and the Danish standard DS 700 : Lys og belysning I arbejdsrum , or more...... specifically the requirements that apply to the work area and the immediate surrounding area. By providing a task light that fulfils the requirements for task lighting and the immediate surrounding area, the general lighting only needs to provide the illuminance levels required for background lighting...... and thereby a reduction in installed power for general lighting of about 40 % compared to the way illuminance levels are designed in an office environment in Denmark today. This lighting strategy is useful when the placement of the task area is not defined in the space before the lighting is design ed...

  14. Late Washing efficiency

    International Nuclear Information System (INIS)

    Morrissey, M.F.

    1992-01-01

    Interim Waste Technology has demonstrated the Late Washing concept on the Experimental Laboratory Filter (ELF) at TNX. In two tests, washing reduced the [NO 2 - ] from 0.08 M to approximately 0.01 M on slurries with 2 year equivalent radiation exposures and 9.5 wt. % solids. For both washes, the [NO 2 - ] decreased at rates near theoretical for a constant volume stirred vessel, indicating approximately l00% washing efficiency. Permeate flux was greater than 0.05 gpm/ft 2 for both washes at a transmembrane pressure of 50 psi and flow velocity of 9 ft/sec

  15. Merging {DBMs} Efficiently

    DEFF Research Database (Denmark)

    David, Alexandre

    2005-01-01

    In this paper we present different algorithms to reduce the number of DBMs in federations by merging them. Federations are unions of DBMs and are used to represent non-convex zones. Inclusion checking between DBMs is a limited technique to reduce the size of federations and how to choose some DBMs...... to merge them into a larger one is a combi-natorial problem. We present a number of simple but efficient techniques to avoid searching the combinations while still being able to merge any number of DBMs...

  16. High efficiency positron moderation

    International Nuclear Information System (INIS)

    Taqqu, D.

    1990-01-01

    A new positron moderation scheme is proposed. It makes use of electric and magnetic fields to confine the β + emitted by a radioactive source forcing them to slow down within a thin foil. A specific arrangement is described where an intermediary slowed-down beam of energy below 10 keV is produced. By directing it towards a standard moderator optimal conversion into slow positrons is achieved. This scheme is best applied to short lived β + emitters for which a 25% moderation efficiency can be reached. Within the state of the art technology a slow positron source intensity exceeding 2 x 10 10 e + /sec is achievable. (orig.)

  17. Energy efficient data centers

    Energy Technology Data Exchange (ETDEWEB)

    Tschudi, William; Xu, Tengfang; Sartor, Dale; Koomey, Jon; Nordman, Bruce; Sezgen, Osman

    2004-03-30

    Data Center facilities, prevalent in many industries and institutions are essential to California's economy. Energy intensive data centers are crucial to California's industries, and many other institutions (such as universities) in the state, and they play an important role in the constantly evolving communications industry. To better understand the impact of the energy requirements and energy efficiency improvement potential in these facilities, the California Energy Commission's PIER Industrial Program initiated this project with two primary focus areas: First, to characterize current data center electricity use; and secondly, to develop a research ''roadmap'' defining and prioritizing possible future public interest research and deployment efforts that would improve energy efficiency. Although there are many opinions concerning the energy intensity of data centers and the aggregate effect on California's electrical power systems, there is very little publicly available information. Through this project, actual energy consumption at its end use was measured in a number of data centers. This benchmark data was documented in case study reports, along with site-specific energy efficiency recommendations. Additionally, other data center energy benchmarks were obtained through synergistic projects, prior PG&E studies, and industry contacts. In total, energy benchmarks for sixteen data centers were obtained. For this project, a broad definition of ''data center'' was adopted which included internet hosting, corporate, institutional, governmental, educational and other miscellaneous data centers. Typically these facilities require specialized infrastructure to provide high quality power and cooling for IT equipment. All of these data center types were considered in the development of an estimate of the total power consumption in California. Finally, a research ''roadmap'' was developed

  18. Efficiency improvements in transport

    Energy Technology Data Exchange (ETDEWEB)

    Schramm, J. [Technical Univ. of Denmark. DTU Mechanical Engineering, Kgs. Lyngby (Denmark); Christensen, Linda; Jensen, Thomas C. [Technical Univ. of Denmark. DTU Transport, Kgs. Lyngby (Denmark)

    2012-11-15

    Transport of people, personal belongings and goods in private cars is fundamental to our modern welfare society and economic growth, and has grown steadily over many decades. Motor fuels have been based almost entirely on crude oil for the last century. During the last couple of decades engines built for traditional fuels have become more advanced and efficient; this has reduced fuel consumption by around 40% and emissions by more than 90%. Only in the same time span have we begun to look at alternatives to fossil fuels. Biofuels such as biodiesel, bioethanol, biomethanol and biogas can replace petrol and diesel, and in recent years algae have shown a new potential for diesel fuel. Natural gas is also becoming an interesting fuel due to its large resources worldwide. GTL, CTL and BTL are liquid fuels produced from solid or gaseous sources. GTL and CTL are expensive to produce and not very CO{sub 2}-friendly, but they are easily introduced and need little investment in infrastructure and vehicles. DME is an excellent fuel for diesel engines. Methanol and DME produced from biomass are among the most CO{sub 2}-reducing fuels and at the same time the most energy-efficient renewable fuels. Fuel cell vehicles (FCVs) are currently fuelled by hydrogen, but other fuels are also possible. There are, however, several barriers to the implementation of fuel cell vehicles. In particular, a hydrogen infrastructure needs to be developed. Electric vehicles (EVs) have the advantage that energy conversion is centralised at the power plant where it can be done at optimum efficiency and emissions. EVs have to be charged at home, and also away from home when travelling longer distances. With an acceptable fast charging infrastructure at least 85% of the one-car families in Denmark could be potential EV customers. Range improvements resulting from better batteries are expected to create a large increase in the number of EVs in Denmark between 2020 and 2030. The hybrid electric vehicle

  19. Energy Efficient Digital Networks

    Energy Technology Data Exchange (ETDEWEB)

    Lanzisera, Steven [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Brown, Richard [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-01-01

    Digital networks are the foundation of the information services, and play an expanding and indispensable role in our lives, via the Internet, email, mobile phones, etc. However, these networks consume energy, both through the direct energy use of the network interfaces and equipment that comprise the network, and in the effect they have on the operating patterns of devices connected to the network. The purpose of this research was to investigate a variety of technology and policy issues related to the energy use caused by digital networks, and to further develop several energy-efficiency technologies targeted at networks.

  20. Work-related voice disorder

    Directory of Open Access Journals (Sweden)

    Paulo Eduardo Przysiezny

    2015-04-01

    Full Text Available INTRODUCTION: Dysphonia is the main symptom of the disorders of oral communication. However, voice disorders also present with other symptoms such as difficulty in maintaining the voice (asthenia, vocal fatigue, variation in habitual vocal fundamental frequency, hoarseness, lack of vocal volume and projection, loss of vocal efficiency, and weakness when speaking. There are several proposals for the etiologic classification of dysphonia: functional, organofunctional, organic, and work-related voice disorder (WRVD.OBJECTIVE: To conduct a literature review on WRVD and on the current Brazilian labor legislation.METHODS: This was a review article with bibliographical research conducted on the PubMed and Bireme databases, using the terms "work-related voice disorder", "occupational dysphonia", "dysphonia and labor legislation", and a review of labor and social security relevant laws.CONCLUSION: WRVD is a situation that frequently is listed as a reason for work absenteeism, functional rehabilitation, or for prolonged absence from work. Currently, forensic physicians have no comparative parameters to help with the analysis of vocal disorders. In certain situations WRVD may cause, work disability. This disorder may be labor-related, or be an adjuvant factor to work-related diseases.

  1. Meaningful work, work engagement and organisational commitment

    Directory of Open Access Journals (Sweden)

    Madelyn Geldenhuys

    2014-03-01

    Research purpose: The aim of the study was to investigate the relationships amongst psychological meaningfulness, work engagement and organisational commitment and to test for a possible mediation effect of work engagement on the relationship between psychological meaningfulness and organisational commitment. Motivation for the study: Managers have to rethink ways of improving productivity and performance at work, due to the diverse, and in some instances escalating, needs of employees (e.g. financial support to uphold their interest in and enjoyment of working. Research approach, design and method: A quantitative approach was employed to gather the data for the study, utilising a cross-sectional survey design. The sample (n = 415 consisted of working employees from various companies and positions in Gauteng, South Africa. Main findings: The results confirmed a positive relationship between psychological meaningfulness, work engagement and organisational commitment. Further, psychological meaningfulness predicts work engagement, whilst psychological meaningfulness and work engagement predict organisational commitment. Practical/managerial implications: Employers identifying their employees’ commitment patterns and mapping out strategies for enhancing those that are relevant to organisational goals will yield positive work outcomes (e.g. employees who are creative, seek growth or challenges for themselves. Contribution/value-add: This study contributes to the literature through highlighting the impact that meaningful work has on sustaining employee commitment to the organisation.

  2. Innovation and efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Haustein, H D; Maier, H

    1979-01-01

    Innovation, the process of creation, development, use, and diffusion of a new product or process for new or already-identified needs, has become a topic of concern for both developed and developing countries. Although the causes and motivations for the concern differ widely from country to country, the development of effective innovation policies is a universal problem. The International Institute for Applied Systems Analysis (IIASA) has been concerned with this problem for several years. The main purpose of an innovation is to improve the efficiency of the production unit that adopts the innovation, in comparison with the efficiency of the entire production system. To grasp the nature of the innovation process, its impact on the economic performance of the country, and to identify the appropriate managerial actions to shape and stimulate the innovation process, five different stages through which the innovation process usually runs are outlined. The IIASA has been concerned with supplanting the former approach of spontaneous innovation with a systems analysis approach to help implement new forms of social, innovative learning to be beneficial to mankind. 7 references, 2 figures, 1 table. (SAC)

  3. Using energy efficiently

    International Nuclear Information System (INIS)

    Nipkow, J.; Brunner, C. U.

    2005-01-01

    This comprehensive article discusses the perspectives for reducing electricity consumption in Switzerland. The increase in consumption is discussed that has occurred in spite of the efforts of the Swiss national energy programmes 'Energy 2000' and 'SwissEnergy'. The fact that energy consumption is still on the increase although efficient and economically-viable technology is available is commented on. The authors are of the opinion that the market alone cannot provide a complete solution and that national and international efforts are needed to remedy things. In particular, the external costs that are often not included when estimating costs are stressed. Several technical options available, such as the use of fluorescent lighting, LCD monitors and efficient electric motors, are looked at as are other technologies quoted as being a means of reducing power consumption. Ways of reducing stand-by losses and system optimisation are looked at as are various scenarios for further development and measures that can be implemented in order to reduce power consumption

  4. Knowledge work and work-related stress

    DEFF Research Database (Denmark)

    Ipsen, Christine

    2006-01-01

    Work-related stress is an increasing problem in Europe. Earlier studies have stated that knowledge-work comprises working conditions which reflect a good psychosocial environment. Recent Danish studies, however, point at stress being an increasing problem in knowledge-intensive companies...... with informally, individu-ally and incidentally. It is only when problems exist that enhanced support is offered in order to help an employee to cope or recover. As most workplace initiatives work at this tertiary level, the sources of work-related and organiza-tional stress are not reduced or eliminated...... as good and stimulating, but has on the other hand sides to it which can cause frustration and stress. The implication of organisational characteristics of the knowledge-intensive companies studied is a transfer of the responsibility for ones own working-life. Consequently, issues are dealt...

  5. Multiresolution molecular mechanics: Implementation and efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Biyikli, Emre; To, Albert C., E-mail: albertto@pitt.edu

    2017-01-01

    Atomistic/continuum coupling methods combine accurate atomistic methods and efficient continuum methods to simulate the behavior of highly ordered crystalline systems. Coupled methods utilize the advantages of both approaches to simulate systems at a lower computational cost, while retaining the accuracy associated with atomistic methods. Many concurrent atomistic/continuum coupling methods have been proposed in the past; however, their true computational efficiency has not been demonstrated. The present work presents an efficient implementation of a concurrent coupling method called the Multiresolution Molecular Mechanics (MMM) for serial, parallel, and adaptive analysis. First, we present the features of the software implemented along with the associated technologies. The scalability of the software implementation is demonstrated, and the competing effects of multiscale modeling and parallelization are discussed. Then, the algorithms contributing to the efficiency of the software are presented. These include algorithms for eliminating latent ghost atoms from calculations and measurement-based dynamic balancing of parallel workload. The efficiency improvements made by these algorithms are demonstrated by benchmark tests. The efficiency of the software is found to be on par with LAMMPS, a state-of-the-art Molecular Dynamics (MD) simulation code, when performing full atomistic simulations. Speed-up of the MMM method is shown to be directly proportional to the reduction of the number of the atoms visited in force computation. Finally, an adaptive MMM analysis on a nanoindentation problem, containing over a million atoms, is performed, yielding an improvement of 6.3–8.5 times in efficiency, over the full atomistic MD method. For the first time, the efficiency of a concurrent atomistic/continuum coupling method is comprehensively investigated and demonstrated.

  6. Multi-directional program efficiency

    DEFF Research Database (Denmark)

    Asmild, Mette; Balezentis, Tomas; Hougaard, Jens Leth

    2016-01-01

    The present paper analyses both managerial and program efficiencies of Lithuanian family farms, in the tradition of Charnes et al. (Manag Sci 27(6):668–697, 1981) but with the important difference that multi-directional efficiency analysis rather than the traditional data envelopment analysis...... approach is used to estimate efficiency. This enables a consideration of input-specific efficiencies. The study shows clear differences between the efficiency scores on the different inputs as well as between the farm types of crop, livestock and mixed farms respectively. We furthermore find that crop...... farms have the highest program efficiency, but the lowest managerial efficiency and that the mixed farms have the lowest program efficiency (yet not the highest managerial efficiency)....

  7. "Creative" Work Schedules.

    Science.gov (United States)

    Blai, Boris

    Many creative or flexible work scheduling options are becoming available to the many working parents, students, handicapped persons, elderly individuals, and others who are either unable or unwilling to work a customary 40-hour work week. These options may be broadly categorized as either restructured or reduced work time options. The three main…

  8. An efficient and extensible approach for compressing phylogenetic trees

    KAUST Repository

    Matthews, Suzanne J; Williams, Tiffani L

    2011-01-01

    Background: Biologists require new algorithms to efficiently compress and store their large collections of phylogenetic trees. Our previous work showed that TreeZip is a promising approach for compressing phylogenetic trees. In this paper, we extend

  9. Influence of arc parameters on plasma cutting efficiency of rails

    International Nuclear Information System (INIS)

    Dautov, S.S.

    2006-01-01

    The work shows the impact analysis of different arc areas upon metal cutting. The influence of over-nozzle and intra-metal areas extension of elastic arc on efficiency of real cutting is determined. (author)

  10. Efficient chaotic based satellite power supply subsystem

    International Nuclear Information System (INIS)

    Ramos Turci, Luiz Felipe; Macau, Elbert E.N.; Yoneyama, Takashi

    2009-01-01

    In this work, we investigate the use of the Dynamical System Theory to increase the efficiency of the satellite power supply subsystems. The core of a satellite power subsystem relies on its DC/DC converter. This is a very nonlinear system that presents a multitude of phenomena ranging from bifurcations, quasi-periodicity, chaos, coexistence of attractors, among others. The traditional power subsystem design techniques try to avoid these nonlinear phenomena so that it is possible to use linear system theory in small regions about the equilibrium points. Here, we show that more efficiency can be drawn from a power supply subsystem if the DC/DC converter operates in regions of high nonlinearity. In special, if it operates in a chaotic regime, is has an intrinsic sensitivity that can be exploited to efficiently drive the power subsystem over high ranges of power requests by using control of chaos techniques.

  11. Efficient chaotic based satellite power supply subsystem

    Energy Technology Data Exchange (ETDEWEB)

    Ramos Turci, Luiz Felipe [Technological Institute of Aeronautics (ITA), Sao Jose dos Campos, SP (Brazil)], E-mail: felipeturci@yahoo.com.br; Macau, Elbert E.N. [National Institute of Space Research (Inpe), Sao Jose dos Campos, SP (Brazil)], E-mail: elbert@lac.inpe.br; Yoneyama, Takashi [Technological Institute of Aeronautics (ITA), Sao Jose dos Campos, SP (Brazil)], E-mail: takashi@ita.br

    2009-10-15

    In this work, we investigate the use of the Dynamical System Theory to increase the efficiency of the satellite power supply subsystems. The core of a satellite power subsystem relies on its DC/DC converter. This is a very nonlinear system that presents a multitude of phenomena ranging from bifurcations, quasi-periodicity, chaos, coexistence of attractors, among others. The traditional power subsystem design techniques try to avoid these nonlinear phenomena so that it is possible to use linear system theory in small regions about the equilibrium points. Here, we show that more efficiency can be drawn from a power supply subsystem if the DC/DC converter operates in regions of high nonlinearity. In special, if it operates in a chaotic regime, is has an intrinsic sensitivity that can be exploited to efficiently drive the power subsystem over high ranges of power requests by using control of chaos techniques.

  12. Efficiency analysis system of material management

    Directory of Open Access Journals (Sweden)

    Bogusław Śliwczyński

    2012-12-01

    Full Text Available Background: Significant scope of enterprise's efficiency management is improving of material management process both the strategic and operational level. The complexity of material flow processes can lead to a threat such as distraction and disintegration of analysis focusing on many different factors influenced on effective sourcing and procurement management, transport and warehousing processes, inventory management, working capital and cash flow management. Material and methods: The presented article focuses on multidimensional and multi-criteria analysis of material management efficiency that is considered as decision support system. Authors have presented results of the research regarding ineffective material management confirm insufficient analytical supporting in various decisions of procurement operations. Results and conclusions: Based on research results authors presented in the article model of efficiency analysis system of material management.

  13. Energy and bandwidth-efficient wireless transmission

    CERN Document Server

    Gao, Wei

    2017-01-01

    This book introduces key modulation and predistortion techniques for approaching energy and spectrum-efficient transmission for wireless communication systems. The book presents a combination of theoretical principles, practical implementations, and actual tests. It focuses on spectrum-efficient modulation and energy-efficient transmission techniques in the portable wireless communication systems, and introduces currently developed and designed RF transceivers in the latest wireless markets. Most materials, design examples, and design strategies used are based on the author’s two decades of work in the digital communication fields, especially in the areas of the digital modulations, demodulations, digital signal processing, and linearization of power amplifiers. The applications of these practical products and equipment cover the satellite communications on earth station systems, microwave communication systems, 2G GSM and 3G WCDMA mobile communication systems, and 802.11 WLAN systems.

  14. Conditional Probability Modulates Visual Search Efficiency

    Directory of Open Access Journals (Sweden)

    Bryan eCort

    2013-10-01

    Full Text Available We investigated the effects of probability on visual search. Previous work has shown that people can utilize spatial and sequential probability information to improve target detection. We hypothesized that performance improvements from probability information would extend to the efficiency of visual search. Our task was a simple visual search in which the target was always present among a field of distractors, and could take one of two colors. The absolute probability of the target being either color was 0.5; however, the conditional probability – the likelihood of a particular color given a particular combination of two cues – varied from 0.1 to 0.9. We found that participants searched more efficiently for high conditional probability targets and less efficiently for low conditional probability targets, but only when they were explicitly informed of the probability relationship between cues and target color.

  15. Cascade enzymatic reactions for efficient carbon sequestration.

    Science.gov (United States)

    Xia, Shunxiang; Zhao, Xueyan; Frigo-Vaz, Benjamin; Zheng, Wenyun; Kim, Jungbae; Wang, Ping

    2015-04-01

    Thermochemical processes developed for carbon capture and storage (CCS) offer high carbon capture capacities, but are generally hampered by low energy efficiency. Reversible cascade enzyme reactions are examined in this work for energy-efficient carbon sequestration. By integrating the reactions of two key enzymes of RTCA cycle, isocitrate dehydrogenase and aconitase, we demonstrate that intensified carbon capture can be realized through such cascade enzymatic reactions. Experiments show that enhanced thermodynamic driving force for carbon conversion can be attained via pH control under ambient conditions, and that the cascade reactions have the potential to capture 0.5 mol carbon at pH 6 for each mole of substrate applied. Overall it manifests that the carbon capture capacity of biocatalytic reactions, in addition to be energy efficient, can also be ultimately intensified to approach those realized with chemical absorbents such as MEA. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Exploiting Best-Match Equations for Efficient Reinforcement Learning

    NARCIS (Netherlands)

    van Seijen, Harm; Whiteson, Shimon; van Hasselt, Hado; Wiering, Marco

    This article presents and evaluates best-match learning, a new approach to reinforcement learning that trades off the sample efficiency of model-based methods with the space efficiency of model-free methods. Best-match learning works by approximating the solution to a set of best-match equations,

  17. Exergetic efficiency optimization for an irreversible heat pump ...

    Indian Academy of Sciences (India)

    This paper deals with the performance analysis and optimization for irreversible heat pumps working on reversed Brayton cycle with constant-temperature heat reservoirs by taking exergetic efficiency as the optimization objective combining exergy concept with finite-time thermodynamics (FTT). Exergetic efficiency is ...

  18. Ionization efficiency calculations for cavity thermoionization ion source

    International Nuclear Information System (INIS)

    Turek, M.; Pyszniak, K.; Drozdziel, A.; Sielanko, J.; Maczka, D.; Yuskevich, Yu.V.; Vaganov, Yu.A.

    2009-01-01

    The numerical model of ionization in a thermoionization ion source is presented. The review of ion source ionization efficiency calculation results for various kinds of extraction field is given. The dependence of ionization efficiency on working parameters like ionizer length and extraction voltage is discussed. Numerical simulations results are compared to theoretical predictions obtained from a simplified ionization model

  19. ENERGY EFFICIENT DESALINATOR

    Directory of Open Access Journals (Sweden)

    T. A. Ismailov

    2017-01-01

    Full Text Available Objectives. The aim of the research is to develop a thin-film semiconductor thermoelectric heat pump of cylindrical shape for the desalination of sea water.Methods. To improve the efficiency of the desalination device, a  special thin-film semiconductor thermoelectric heat pump of  cylindrical shape is developed. The construction of the thin-film  semiconductor thermoelectric heat pump allows the flow rates of  incoming sea water and outflowing fresh water and brine to be  equalised by changing the geometric dimensions of the desalinator.  The cross-sectional area of the pipeline for incoming sea water is equal to the total area of outflowing fresh water and brine.Results. The use of thin-film semiconductor p- and n-type branches  in a thermo-module reduces their electrical resistance virtually to  zero and completely eliminates Joule's parasitic heat release. The  Peltier thermoelectric effect on heating and cooling is completely  preserved, bringing the efficiency of the heat pump to almost 100%, improving the energy-saving characteristics of the  desalinator as a whole. To further increase the efficiency of the  proposed desalinator, thermoelectric modules with radiation can be  used as thermoelectric devices.Conclusion. As a consequence of the creation of conditions of high rarefaction under which water will be converted to steam, which, at  20° C, is cold (as is the condensed distilled water, energy costs can  be reduced. In this case, the energy for heating and cooling is not  wasted; moreover, sterilisation is also achieved using the ultraviolet  radiation used in the thermoelectric devices, which, on the one hand, generate electromagnetic ultraviolet radiation, and, on the other, cooling. Such devices operate in optimal mode without heat  release. The desalination device can be used to produce fresh water and concentrated solutions from any aqueous solutions, including wastewater from industrial

  20. Intellectual Property on Advertising Works (1)

    OpenAIRE

    梁瀬, 和男; Kazuo, YANASE

    1999-01-01

    In the deep depression of Japanese Economy, "advertising directly effective for selling" is now desired eagerly in many companies. Moreover, the drastic retrenchment in advertising budget strictly asks its efficiency and effective advertisng. As a result, the efficient accomplishment of advertising purpose may force intellectual property which comes into advertising works belong to advertisers. It is ideal for advertisers, ad agencies and prouction companies to make an agreement in document w...

  1. Pragmatic and cost efficient D and D

    Energy Technology Data Exchange (ETDEWEB)

    Morris, M. [Nuclear Fuel Services, Erwin, TN (United States)

    1998-03-01

    A great deal of effort is expended by remediation professionals in the pursuit of new technologies to assist them in performing their tasks more efficiently. These individuals understand the cost savings associated with volume reduction and waste minimization and routinely incorporate these practices into their planning. However, the largest cost component on many D and D projects is labor. Increasing the efficiency of work force utilization is frequently the most overlooked technique that can be instituted and which can easily offer major cost savings. Granted, some D and D jobs require highly specialized tools and equipment which are quite expensive. Decreasing these costs is often not an option or will yield minimal results. Conversely, the increase in worker efficiency can usually decrease costs dramatically. During the performance of the Safe Shutdown Project at the Fernald Environmental Management Project (the Fernald site), a process improvement initiative was instituted in support of the development of the Ten Year Plan. Costs associated with the removal of hundreds of thousands of pounds of nuclear material from formerly utilized equipment piping, and ductwork in nuclear facilities at the Fernald site were analyzed. This analysis indicated that the labor component was large enough to merit further inspection. A new approach to the activities was instituted and the results were significant. A macroscopic overview of all work activities utilized work evolution control (sequencing), building segmentation, and efficient use of engineering controls to streamline the D and D process. Overall costs on the first facility were reduced by over 20%. The increased labor efficiency resulted in decreased Personal Protective Equipment costs for field personnel. This approach will be discussed in detail.

  2. Pragmatic and cost efficient D and D

    International Nuclear Information System (INIS)

    Morris, M.

    1998-03-01

    A great deal of effort is expended by remediation professionals in the pursuit of new technologies to assist them in performing their tasks more efficiently. These individuals understand the cost savings associated with volume reduction and waste minimization and routinely incorporate these practices into their planning. However, the largest cost component on many D and D projects is labor. Increasing the efficiency of work force utilization is frequently the most overlooked technique that can be instituted and which can easily offer major cost savings. Granted, some D and D jobs require highly specialized tools and equipment which are quite expensive. Decreasing these costs is often not an option or will yield minimal results. Conversely, the increase in worker efficiency can usually decrease costs dramatically. During the performance of the Safe Shutdown Project at the Fernald Environmental Management Project (the Fernald site), a process improvement initiative was instituted in support of the development of the Ten Year Plan. Costs associated with the removal of hundreds of thousands of pounds of nuclear material from formerly utilized equipment piping, and ductwork in nuclear facilities at the Fernald site were analyzed. This analysis indicated that the labor component was large enough to merit further inspection. A new approach to the activities was instituted and the results were significant. A macroscopic overview of all work activities utilized work evolution control (sequencing), building segmentation, and efficient use of engineering controls to streamline the D and D process. Overall costs on the first facility were reduced by over 20%. The increased labor efficiency resulted in decreased Personal Protective Equipment costs for field personnel. This approach will be discussed in detail

  3. How Lungs Work

    Science.gov (United States)

    ... Diseases > How Lungs Work How Lungs Work The Respiratory System Your lungs are part of the respiratory system, ... your sense of smell. The Parts of the Respiratory System and How They Work Airways SINUSES are hollow ...

  4. CONTROLLING AND BUSINESS EFFICIENCY

    Directory of Open Access Journals (Sweden)

    Tina Vuko

    2013-02-01

    Full Text Available Managing business successfully in dynamic environment requires effective controlling system. Controlling is the process of defining objectives, planning and management control so that every decision maker can act in accordance with agreed objectives. Controlling function as a separate department contributes business efficiency trough ensuring transparency of business result and business processes. Controlling takes place when manager and controller cooperate. The aim of this paper is to investigate the effectiveness of controlling function (i.e. controlling department in Croatian companies and to address the specific features of the function that contribute significantly to overall business performance. The research is conducted on the sample of companies listed on the Regulated market of the Zagreb Stock Exchange. Survey is used as a method to collect the data regarding the controlling function, while financial data necessary for the research are extracted from the published financial statements. Results of the research indicate that controlling department has positive effects on the business performance.

  5. Measuring Tax Efficiency

    DEFF Research Database (Denmark)

    Raimondos-Møller, Pascalis; Woodland, Alan D.

    2004-01-01

    This paper introduces an index of tax optimality thatmeasures the distance of some current tax structure from the optimal taxstructure in the presence of public goods. In doing so, we derive a [0, 1]number that reveals immediately how far the current tax configurationis from the optimal one and......, thereby, the degree of efficiency of a taxsystem. We call this number the Tax Optimality Index. We show howthe basic method can be altered in order to derive a revenue equivalentuniform tax, which measures the size of the public sector. A numericalexample is used to illustrate the method developed.......JEL Code: H21, H41.Keywords: Tax optimality index, excess burden, distance function.Authors Affiliations: Raimondos-Møller: Copenhagen Business School, CEPR,CESifo, and EPRU. Woodland: University of Sydney....

  6. Energy efficiency labelling

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-01

    This research assesses the likely effects on UK consumers of the proposed EEC energy-efficiency labeling scheme. Unless (or until) an energy-labeling scheme is introduced, it is impossible to do more than postulate its likely effects on consumer behavior. This report shows that there are indeed significant differences in energy consumption between different brands and models of the same appliance of which consumers are unaware. Further, the report suggests that, if a readily intelligible energy-labeling scheme were introduced, it would provide useful information that consumers currently lack; and that, if this information were successfully presented, it would be used and could have substantial effects in reducing domestic fuel consumption. Therefore, it is recommended that an energy labeling scheme be introduced.

  7. The Efficiency of Freedom

    DEFF Research Database (Denmark)

    Østergaard Madsen, Christian; Kræmmergaard, Pernille

    2015-01-01

    -government and traditional channels are often used simultaneously, and citizens’ perceptions and previous histories with public authorities influence channel choice. Further, citizens’ existing routines related to third-party non-official channels also influence their interaction with public authorities. Moreover, we find......The Danish e-government strategy aims to increase the efficiency of public sector administration by making e-government channels mandatory for citizens by 2015. Although Danish citizens have adopted e-government channels to interact with public authorities, many also keep using traditional channels....... Previous studies have analyzed citizens’ channel choice in non-mandatory settings, and mostly surrounding a single isolated channel. To cover these gaps we present a mixed method study of citizens’ actual use of e-government channels using domestication theory as our framework. Our findings indicate that e...

  8. Alternative Work Schedules: Designing Compatible Work Systems

    Science.gov (United States)

    Steen, Pamela L.

    1977-01-01

    Attempts to improve the quality of working life through changes in environmental factors, such as flexible hours, are likely to bring limited and short-term advantages unless the work process itself is well-designed and compatible with the environmental changes. (Author/LBH)

  9. Work organisation, technology and working conditions

    NARCIS (Netherlands)

    Dhondt, S.; Kraan, K.; Sloten, G. van

    2002-01-01

    The personal computer, computer networks and the Internet have brought the Union into the Information Age. These technological changes have inevitably led to changes in the work environment and the quality of working conditions. For the third time, the European Foundation for the Improvement of

  10. Making Work-Based Learning Work

    Science.gov (United States)

    Cahill, Charlotte

    2016-01-01

    Americans seeking employment often face a conundrum: relevant work experience is a prerequisite for many jobs, but it is difficult to gain the required experience without being in the workplace. Work-based learning--activities that occur in workplaces through which youth and adults gain the knowledge, skills, and experience needed for entry or…

  11. Efficient Software HEVC to AVS2 Transcoding

    Directory of Open Access Journals (Sweden)

    Yucong Chen

    2016-09-01

    Full Text Available The second generation of Audio and Video coding Standard (AVS is developed by the IEEE 1857 Working Group under project 1857.4 and was standardized in 2016 by the AVS Working Group of China as the new broadcasting standard AVS2. High Efficient Video Coding (HEVC is the newest global video coding standard announced in 2013. More and more codings are migrating from H.264/AVC to HEVC because of its higher compression performance. In this paper, we propose an efficient HEVC to AVS2 transcoding algorithm, which applies a multi-stage decoding information utilization framework to maximize the usage of the decoding information in the transcoding process. The proposed algorithm achieves 11×–17× speed gains over the AVS2 reference software RD 14.0 with a modest BD-rate loss of 9.6%–16.6%.

  12. Final Report: Efficient Databases for MPC Microdata

    Energy Technology Data Exchange (ETDEWEB)

    Michael A. Bender; Martin Farach-Colton; Bradley C. Kuszmaul

    2011-08-31

    The purpose of this grant was to develop the theory and practice of high-performance databases for massive streamed datasets. Over the last three years, we have developed fast indexing technology, that is, technology for rapidly ingesting data and storing that data so that it can be efficiently queried and analyzed. During this project we developed the technology so that high-bandwidth data streams can be indexed and queried efficiently. Our technology has been proven to work data sets composed of tens of billions of rows when the data streams arrives at over 40,000 rows per second. We achieved these numbers even on a single disk driven by two cores. Our work comprised (1) new write-optimized data structures with better asymptotic complexity than traditional structures, (2) implementation, and (3) benchmarking. We furthermore developed a prototype of TokuFS, a middleware layer that can handle microdata I/O packaged up in an MPI-IO abstraction.

  13. Automotive fuel efficiency

    International Nuclear Information System (INIS)

    Abelson, P.H.

    1992-01-01

    For at least the remainder of this century, the United States faces a growing dependence on imported oil. Costs are substantial, and they will mount. In June 1992, net imports provided nearly 50% of supplies, and their cost was $4.3 billion. Cost of net imports of motor vehicles and parts amounted to $3.0 billion. The two items combined totaled more than the negative trade balance of $6.6 billion. The light-duty highway fleet alone accounted for 38.2% of U.S. oil consumption in 1988. Correspondingly, the fleet was a substantial emitter of air pollutants - NO x , CO, and nonmethane hydrocarbons. In addition, it was a major source of CO 2 . The twin problems of oil imports and pollution would be ameliorated if the fuel economy if cars and trucks could be improved and their emissions were also reduced. In principle, the mileage of US automobiles could be substantially improved. But on purchasing a car, U.S. buyers rank fuel efficiency eight when making their choice. They are attracted to options that lower mileage. Consumers also tend to prefer large cars over small ones for reasons of safety. Increasingly, buyers are purchasing light trucks and vans that have inferior fuel efficiency. As a result of the above trends, the average mileage of the US automotive fleet has been diminishing. As long as fuel is available at comparatively low prices and there is no federal requirement for better mileage, improvement is unlikely. Moreover, even if improvements were mandated, change would be slow

  14. Alexandria: towards an efficient centralised document management. More efficient business processes

    International Nuclear Information System (INIS)

    Couvreur, D.

    2011-01-01

    The capital of SCK-CEN is the knowledge of its staff. There is an enormous amount of information circulating within the research centre. A centralised management for all documents is also critical to efficiently manage, share and unlock the expertise. Since 2009, SCK-CEN has been working on a document management system: Alexandria. A first test draft was completed in 2010.

  15. Academic Performance and Burnout: An Efficient Frontier Analysis of Resource Use Efficiency among Employed University Students

    Science.gov (United States)

    Galbraith, Craig S.; Merrill, Gregory B.

    2015-01-01

    We examine the impact of university student burnout on academic achievement. With a longitudinal sample of working undergraduate university business and economics students, we use a two-step analytical process to estimate the efficient frontiers of student productivity given inputs of labour and capital and then analyse the potential determinants…

  16. Fuel Efficiency in AWD-system

    OpenAIRE

    Fredriksson, Robert; Trkulja, Milovan

    2008-01-01

    This degree project has been made in cooperation with engineers working for GM Engineering/Saab Automobile AB in Trollhättan. The given name by Saab for the project is “Fuel efficiency improvements in All Wheel Drive(AWD)-system”. The main tasks of this thesis work were to investigate the size of the power losses in different parts on the propeller shaft, to design a computer program that calculates coordinates and angles on a propeller shaft and to investigate the possibilities to put togeth...

  17. How venture capital works.

    Science.gov (United States)

    Zider, B

    1998-01-01

    The popular mythology surrounding the U.S. venture-capital industry derives from a previous era. Venture capitalists who nurtured the computer industry in its infancy were legendary both for their risk taking and for their hands-on operating experience. But today things are different, and separating the myths from the realities is crucial to understanding this important piece of the U.S. economy. Today's venture capitalists are more like conservative bankers than the risk takers of days past. They have carved out a specialized niche in the capital markets, filling a void that other institutions cannot serve. They are the linch-pins in an efficient system for meeting the needs of institutional investors looking for high returns, of entrepreneurs seeking funding, and of investment bankers looking for companies to sell. Venture capitalists must earn a consistently superior return on investments in inherently risky businesses. The myth is that they do so by investing in good ideas and good plans. In reality, they invest in good industries--that is, industries that are more competitively forgiving than the market as a whole. And they structure their deals in a way that minimizes their risk and maximizes their returns. Although many entrepreneurs expect venture capitalists to provide them with sage guidance as well as capital, that expectation is unrealistic. Given a typical portfolio of ten companies and a 2,000-hour work year, a venture capital partner spends on average less than two hours per week on any given company. In addition to analyzing the current venture-capital system, the author offers practical advice to entrepreneurs thinking about venture funding.

  18. The Efficient Side of Progressive Income Taxation

    OpenAIRE

    Corneo, Giacomo

    2000-01-01

    This paper examines the allocative implications of progressive income taxation when individuals care about their relative income. It shows that tax progressivity might improve efficiency, and the more so in egalitarian economies. Introducing a progressive income tax can yield a Pareto improvement if pre-tax income is evenly distributed. Implementing undistorted choices of working hours requires a progressive tax schedule, and the optimal degree of progressivity decreases with pre-tax income i...

  19. An Efficient Compiler for Weighted Rewrite Rules

    OpenAIRE

    Mohri, Mehryar; Sproat, Richard

    1996-01-01

    Context-dependent rewrite rules are used in many areas of natural language and speech processing. Work in computational phonology has demonstrated that, given certain conditions, such rewrite rules can be represented as finite-state transducers (FSTs). We describe a new algorithm for compiling rewrite rules into FSTs. We show the algorithm to be simpler and more efficient than existing algorithms. Further, many of our applications demand the ability to compile weighted rules into weighted FST...

  20. An Efficient Algorithm for Unconstrained Optimization

    Directory of Open Access Journals (Sweden)

    Sergio Gerardo de-los-Cobos-Silva

    2015-01-01

    Full Text Available This paper presents an original and efficient PSO algorithm, which is divided into three phases: (1 stabilization, (2 breadth-first search, and (3 depth-first search. The proposed algorithm, called PSO-3P, was tested with 47 benchmark continuous unconstrained optimization problems, on a total of 82 instances. The numerical results show that the proposed algorithm is able to reach the global optimum. This work mainly focuses on unconstrained optimization problems from 2 to 1,000 variables.

  1. Efficiency of innovative technology in construction industry

    Science.gov (United States)

    Stverkova, H.; Vaclavik, V.

    2017-10-01

    The need for sustainability increasingly influences the development of new technologies, business processes and working practices. Innovations are an important part of all business processes. The aim of innovation is, in particular, to reduce the burden on the environment. The current trend in the construction industry is diamond rope cutting. The aim of the paper is to evaluate the most advanced technology for cutting and removing concrete structures in terms of efficiency.

  2. Boundary work of dentists in everyday work.

    Science.gov (United States)

    Franzén, Cecilia

    2012-08-01

    The Swedish policy objectives in dental care provision - to meet public demands for dental care and to increase the cost-effectiveness of the service - require dentists to work in teams with dental hygienists and dental nurses. This study focused on the role of dentists in the distribution of work tasks within teams in one Swedish Public Dental Service organisation. Dental clinics were viewed as micro-political arenas in which dentists attempt to demarcate professional boundaries in response to teamwork. Semi-structured interviews, observations and documents were used. The interviewed individuals were seven dentists employed at two clinics, the managers of each clinic and the general manager. The dentists were interviewed to investigate how they defend or blur professional boundaries. They were also observed at work. The clinic managers and the general manager were interviewed to identify their expectations of dentists concerning work division. The documents comprised organisational plans and annual reports. Dentists demarcated professional boundaries by utilising various power resources: treatment responsibility, specialist knowledge, discretion, and avoidance of work considered to be low status work. The dentists also contributed to blurred boundaries between themselves and the other dental professionals by discussing patient treatment, giving and receiving advice, and assisting the others in skill development. Although dentists' boundary work could obstruct implementation of policy objectives, dentists' behaviour contributed to effective collaboration within the teams. © 2012 John Wiley & Sons A/S.

  3. Enhancement of human performance with developing ergonomic workplace environment and providing work-life balance

    OpenAIRE

    Tamas Forgacs,; Henrietta Finna

    2010-01-01

    Ergonomy aims at creating a work place that suits the employee’s needs. A well-developed office does not only increase work efficiency but it can also significantly reduce costs. This study researches and reveals the specific personal attributes and the factors of workplace environment, which have an effect on the efficiency of the workforce. We were searching for studies, where the core work wasn’t changed -the increase in work efficiency was reached only by changing the work environment.

  4. Where is the Efficient Frontier

    OpenAIRE

    Jing Chen

    2010-01-01

    Tremendous effort has been spent on the construction of reliable efficient frontiers. However, mean-variance efficient portfolios constructed using sample means and covariance often perform poorly out of sample. We prove that, the capital market line is the efficient frontier for the risky assets in a financial market with liquid fixed income trading. This unified understanding of riskless asset as the boundary of risky assets relieves the burden of constructing efficient frontiers in asset a...

  5. HIGH-EFFICIENCY INFRARED RECEIVER

    Directory of Open Access Journals (Sweden)

    A. K. Esman

    2016-01-01

    Full Text Available Recent research and development show promising use of high-performance solid-state receivers of the electromagnetic radiation. These receivers are based on the low-barrier Schottky diodes. The approach to the design of the receivers on the basis of delta-doped low-barrier Schottky diodes with beam leads without bias is especially actively developing because for uncooled receivers of the microwave radiation these diodes have virtually no competition. The purpose of this work is to improve the main parameters and characteristics that determine the practical relevance of the receivers of mid-infrared electromagnetic radiation at the operating room temperature by modifying the electrodes configuration of the diode and optimizing the distance between them. Proposed original design solution of the integrated receiver of mid-infrared radiation on the basis of the low-barrier Schottky diodes with beam leads allows to effectively adjust its main parameters and characteristics. Simulation of the electromagnetic characteristics of the proposed receiver by using the software package HFSS with the basic algorithm of a finite element method which implemented to calculate the behavior of electromagnetic fields on an arbitrary geometry with a predetermined material properties have shown that when the inner parts of the electrodes of the low-barrier Schottky diode is performed in the concentric elliptical convex-concave shape, it can be reduce the reflection losses to -57.75 dB and the standing wave ratio to 1.003 while increasing the directivity up to 23 at a wavelength of 6.09 μm. At this time, the rounded radii of the inner parts of the anode and cathode electrodes are equal 212 nm and 318 nm respectively and the gap setting between them is 106 nm. These parameters will improve the efficiency of the developed infrared optical-promising and electronic equipment for various purposes intended for work in the mid-infrared wavelength range. 

  6. Typology of efficiency of functioning of enterprise

    Directory of Open Access Journals (Sweden)

    I.I. Svitlyshyn

    2015-03-01

    Full Text Available Measuring and estimation of the efficiency of functioning of enterprises of agrarian sector traditionally performed by applying only some of its types, which focuses mainly on operating activity. Investment and financial activity, as inalienable constituent of economic process of enterprise, remain regardless thus. In addition, in scientific literature and practical activity to research of efficiency focuses on the stages «production-exchange». The stages of «distribution» and «consumption» at the level of enterprise are not examined. This distorts the results of measuring and estimation of efficiency and makes uneffective proposals for its growth. Coming from what, approach is worked out to determination and systematization of basic types of efficiency of functioning of enterprises of agrarian sector. Approach is based on the offered model, that system represents all stages and types of economic activity of the enterprise. The basic lines of efficiency are interpreted on every stage and in the cut of types of economic activity of enterprise. It allows to provide a complexity and system during its measuring and estimation.

  7. ???????????? SolidWorks/SolidWorks Flow Simulation/SolidWorks Simulation ??? ?????????? ???????? ?? ????????????? ???

    OpenAIRE

    ????????????, ?. ?.; ????????, ?. ?.; ?????, ?. ?.

    2012-01-01

    ? ?????? ???????? ??????? ??????? ???????? ?? ???????????? ??????????? ????????? SolidWorks/SolidWorks Flow Simulation (COSMOSFloWorks)/SolidWorks Simulation ??? ?????????? ???????? ?? ????????????? ???. ??? ???????? ????????? ???????? ?????????? ?? ?????? ???????? ??????? ? ????????????? ?????? ? ????????????? ????????????? ?????????? ???????????? SolidWorks Flow Simulation (COSMOSFloWorks). ??? ???????????? ??????????? ????????????? ?????? ?? ????????? ??????????? ??????? ?? ??????????? ...

  8. Double Compression Expansion Engine: A Parametric Study on a High-Efficiency Engine Concept

    KAUST Repository

    Bhavani Shankar, Vijai Shankar; Johansson, Bengt; Andersson, Arne

    2018-01-01

    The Double compression expansion engine (DCEE) concept has exhibited a potential for achieving high brake thermal efficiencies (BTE). The effect of different engine components on system efficiency was evaluated in this work using GT Power

  9. Vibration in car repair work.

    Science.gov (United States)

    Hansson, J E; Eklund, L; Kihlberg, S; Ostergren, C E

    1987-03-01

    The main objective of the study was to find efficient hand tools which caused only minor vibration loading. Vibration measurements were carried out under standardised working conditions. The time during which car body repairers in seven companies were exposed to vibration was determined. Chisel hammers, impact wrenches, sanders and saws were the types of tools which generated the highest vibration accelerations. The average daily exposure at the different garages ranged from 22 to 70 min. The risk of vibration injury is currently rated as high. The difference between the highest and lowest levels of vibration was considerable in most tool categories. Therefore the choice of tool has a major impact on the magnitude of vibration exposure. The importance of choosing the right tools and working methods is discussed and a counselling service on vibration is proposed.

  10. TV Energy Consumption Trends and Energy-Efficiency Improvement Options

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Young; Phadke, Amol; Shah, Nihar; Letschert, Virginie

    2011-07-01

    The SEAD initiative aims to transform the global market by increasing the penetration of highly efficient equipment and appliances. SEAD is a government initiative whose activities and projects engage the private sector to realize the large global energy savings potential from improved appliance and equipment efficiency. SEAD seeks to enable high-level global action by informing the Clean Energy Ministerial dialogue as one of the initiatives in the Global Energy Efficiency Challenge. In keeping with its goal of achieving global energy savings through efficiency, SEAD was approved as a task within the International Partnership for Energy Efficiency Cooperation (IPEEC) in January 2010. SEAD partners work together in voluntary activities to: (1) ?raise the efficiency ceiling? by pulling super-efficient appliances and equipment into the market through cooperation on measures like incentives, procurement, awards, and research and development (R&D) investments; (2) ?raise the efficiency floor? by working together to bolster national or regional policies like minimum efficiency standards; and (3) ?strengthen the efficiency foundations? of programs by coordinating technical work to support these activities. Although not all SEAD partners may decide to participate in every SEAD activity, SEAD partners have agreed to engage actively in their particular areas of interest through commitment of financing, staff, consultant experts, and other resources. In addition, all SEAD partners are committed to share information, e.g., on implementation schedules for and the technical detail of minimum efficiency standards and other efficiency programs. Information collected and created through SEAD activities will be shared among all SEAD partners and, to the extent appropriate, with the global public.As of April 2011, the governments participating in SEAD are: Australia, Brazil, Canada, the European Commission, France, Germany, India, Japan, Korea, Mexico, Russia, South Africa, Sweden

  11. New ways to work.

    Science.gov (United States)

    2003-06-01

    Flexible working, work-life balance, family friendliness; all are now familiar terms in today's NHS, and employers, managers and leaders are expected to be forging ahead in improving the working lives for all staff. If you are looking for new ideas to help tackle the challenge, you should try the New Ways to Work website.

  12. Patterns of work injuries

    DEFF Research Database (Denmark)

    Lander, Flemming; Nielsen, Kent Jacob; Rasmussen, Kurt

    2014-01-01

    To compare work injuries treated in an emergency department (ED) and injuries reported to the Danish Working Environment Authority (DWEA).......To compare work injuries treated in an emergency department (ED) and injuries reported to the Danish Working Environment Authority (DWEA)....

  13. Greater autonomy at work

    NARCIS (Netherlands)

    Houtman, I.L.D.

    2004-01-01

    In the past 10 years, workers in the Netherlands increasingly report more decision-making power in their work. This is important for an economy in recession and where workers face greater work demands. It makes work more interesting, creates a healthier work environment, and provides opportunities

  14. Efficiency of cellular information processing

    International Nuclear Information System (INIS)

    Barato, Andre C; Hartich, David; Seifert, Udo

    2014-01-01

    We show that a rate of conditional Shannon entropy reduction, characterizing the learning of an internal process about an external process, is bounded by the thermodynamic entropy production. This approach allows for the definition of an informational efficiency that can be used to study cellular information processing. We analyze three models of increasing complexity inspired by the Escherichia coli sensory network, where the external process is an external ligand concentration jumping between two values. We start with a simple model for which ATP must be consumed so that a protein inside the cell can learn about the external concentration. With a second model for a single receptor we show that the rate at which the receptor learns about the external environment can be nonzero even without any dissipation inside the cell since chemical work done by the external process compensates for this learning rate. The third model is more complete, also containing adaptation. For this model we show inter alia that a bacterium in an environment that changes at a very slow time-scale is quite inefficient, dissipating much more than it learns. Using the concept of a coarse-grained learning rate, we show for the model with adaptation that while the activity learns about the external signal the option of changing the methylation level increases the concentration range for which the learning rate is substantial. (paper)

  15. Efficiency of competitions

    Science.gov (United States)

    Ben-Naim, E.; Hengartner, N. W.

    2007-08-01

    League competition is investigated using random processes and scaling techniques. In our model, a weak team can upset a strong team with a fixed probability. Teams play an equal number of head-to-head matches and the team with the largest number of wins is declared to be the champion. The total number of games needed for the best team to win the championship with high certainty T grows as the cube of the number of teams N , i.e., Ttilde N3 . This number can be substantially reduced using preliminary rounds where teams play a small number of games and subsequently, only the top teams advance to the next round. When there are k rounds, the total number of games needed for the best team to emerge as champion, Tk , scales as follows, Tk˜Nγk with γk=[1-(2/3)k+1]-1 . For example, γk=9/5,27/19,81/65 for k=1,2,3 . These results suggest an algorithm for how to infer the best team using a schedule that is linear in N . We conclude that league format is an ineffective method of determining the best team, and that sequential elimination from the bottom up is fair and efficient.

  16. Efficient polarimetric BRDF model.

    Science.gov (United States)

    Renhorn, Ingmar G E; Hallberg, Tomas; Boreman, Glenn D

    2015-11-30

    The purpose of the present manuscript is to present a polarimetric bidirectional reflectance distribution function (BRDF) model suitable for hyperspectral and polarimetric signature modelling. The model is based on a further development of a previously published four-parameter model that has been generalized in order to account for different types of surface structures (generalized Gaussian distribution). A generalization of the Lambertian diffuse model is presented. The pBRDF-functions are normalized using numerical integration. Using directional-hemispherical reflectance (DHR) measurements, three of the four basic parameters can be determined for any wavelength. This simplifies considerably the development of multispectral polarimetric BRDF applications. The scattering parameter has to be determined from at least one BRDF measurement. The model deals with linear polarized radiation; and in similarity with e.g. the facet model depolarization is not included. The model is very general and can inherently model extreme surfaces such as mirrors and Lambertian surfaces. The complex mixture of sources is described by the sum of two basic models, a generalized Gaussian/Fresnel model and a generalized Lambertian model. Although the physics inspired model has some ad hoc features, the predictive power of the model is impressive over a wide range of angles and scattering magnitudes. The model has been applied successfully to painted surfaces, both dull and glossy and also on metallic bead blasted surfaces. The simple and efficient model should be attractive for polarimetric simulations and polarimetric remote sensing.

  17. CTOs at work

    CERN Document Server

    Donaldson, Scott; Donaldson, Gary

    2012-01-01

    Scott Donaldson, Stanley Siegel and Gary Donaldson interview many of the world's most influential chief technology officers in CTOs at Work, offering a brand-new companion volume to the highly acclaimed elite At Work books including Coders at Work, CIOS at Work and Venture Capitalists at Work. As the words "at work" suggest, the authors focus on how their interviewees tackle the day-to-day work of the CTO while revealing much more: how they got there, how they manage and allocate projects, and how they interact with business units and ensure that their companies take advantage of technologies,

  18. Abstract: Body Work

    DEFF Research Database (Denmark)

    Otto, Lene

    2012-01-01

    This panel will explore the usefulness of the term ‘body work’ in cultural history. Body work is understood as work focusing on the bodies of others as component in a range of occupations in health and social care, as well as in unpaid work in the family. How can the notion of body work inform...... cultural history of health and illness whether through a micro-social focus on the intercorporeal aspects of work in health and social care, or through clarifying our understanding of the times and spaces of work, or through highlighting the relationship between mundane body work and global processes....... The British sociologist Julia Twigg has introduced and explored the term `bodywork', most recently in Body Work in Health and Social Care - Critical Themes, New Agendas (2011). She extends the term body work from applying to the work that individuals undertake on their own bodies, often as part of regimens...

  19. Work-family harmony

    OpenAIRE

    Adhikari,Pralhad

    2018-01-01

    The phenomenon of positively thinking about work and organization during the family hours by a worker is called work-family harmony. On the fag opposite of work-family conflict is work-family harmony. The work extends/intrudes into the family life of the worker, but in a positive way. This kind of positive thinking about the organization helps person's subjective well-being grow and his mental health is also nourished.

  20. Working Hours and Productivity

    OpenAIRE

    Collewet, Marion; Sauermann, Jan

    2017-01-01

    This paper studies the link between working hours and productivity using daily information on working hours and performance of a sample of call centre agents. We exploit variation in the number of hours worked by the same employee across days and weeks due to central scheduling, enabling us to estimate the effect of working hours on productivity. We find that as the number of hours worked increases, the average handling time for a call increases, meaning that agents become less productive. Th...

  1. Live to Work or Love to Work: Work Craving and Work Engagement

    OpenAIRE

    Wojdylo, Kamila; Baumann, Nicola; Fischbach, Lis; Engeser, Stefan

    2014-01-01

    OBJECTIVE: According to the theory of work craving, a workaholic has a craving for self-worth compensatory incentives and an expectation of relief from negative affect experienced through neurotic perfectionism and an obsessive-compulsive style of working. Research has shown that workaholism and work engagement should be considered as two distinct work styles with different health consequences. However, the mechanisms underlying the adoption of these work styles have been neglected. The prese...

  2. Main factors of efficiency of automated radiographic complex

    International Nuclear Information System (INIS)

    Akopov, V.S.; Voronin, S.A.; Grachev, A.V.; Golenishchev, I.A.; Majorov, A.N.; Meshalkin, I.A.

    1978-01-01

    The amount of work providing an assessment of the efficiency of a complex for automatized radiographic control is considered. The technique involves four stages. An analysis was performed to ascertain the efficiency of control of flaw detectability with regard to each of the stages of radiographic control. The relationships used in determining control efficiency and cited in the paper serve as a foundation for optimizing the technical parameters of the devices of the automatized complex and for creating calculation methods for generalized assessments of the efficiency of radiographic control

  3. All passive architecture for high efficiency cascaded Raman conversion

    Science.gov (United States)

    Balaswamy, V.; Arun, S.; Chayran, G.; Supradeepa, V. R.

    2018-02-01

    Cascaded Raman fiber lasers have offered a convenient method to obtain scalable, high-power sources at various wavelength regions inaccessible with rare-earth doped fiber lasers. A limitation previously was the reduced efficiency of these lasers. Recently, new architectures have been proposed to enhance efficiency, but this came at the cost of enhanced complexity, requiring an additional low-power, cascaded Raman laser. In this work, we overcome this with a new, all-passive architecture for high-efficiency cascaded Raman conversion. We demonstrate our architecture with a fifth-order cascaded Raman converter from 1117nm to 1480nm with output power of ~64W and efficiency of 60%.

  4. Live to work or love to work: work craving and work engagement.

    Science.gov (United States)

    Wojdylo, Kamila; Baumann, Nicola; Fischbach, Lis; Engeser, Stefan

    2014-01-01

    According to the theory of work craving, a workaholic has a craving for self-worth compensatory incentives and an expectation of relief from negative affect experienced through neurotic perfectionism and an obsessive-compulsive style of working. Research has shown that workaholism and work engagement should be considered as two distinct work styles with different health consequences. However, the mechanisms underlying the adoption of these work styles have been neglected. The present study proposes that work craving and work engagement are differentially associated with self-regulatory competencies and health. In particular, we expected that the working styles mediate the relationships between emotional self-regulation and health. In the cross-sectional study, 469 teachers from German schools completed online administered questionnaires. By means of structural equation modeling, we tested two indirect paths: a) from self-relaxation deficits via work craving to poor health and b) from self-motivation competencies via work engagement to good health. As expected, we found evidence that a) the negative relationship of self-relaxation deficits on health was partially mediated by work craving and b) the positive relationship of self-motivation competencies on health was partially mediated by work engagement. The present study emphasizes the importance of self-regulation competencies for healthy or unhealthy work styles. Whereas work craving was associated with a low ability to down-regulate negative emotions and poor health, work engagement was associated with a high ability to up-regulate positive emotions and good health.

  5. The human factor in maintenance work

    International Nuclear Information System (INIS)

    Hansson, B.

    1996-01-01

    In most of the maintenance works performed at operating plants, the personnel is the warranty for both efficient performance and good quality. To reach the right quality level in performance, the personnel needs adequate tools and of course a maintenance strategy and an organisation that supports the efficient work. The human factor is mostly referred to when something went wrong and analyses are done. There is a great potential of doing preventive analysis. The presentation will focus on experience in this field and what has been done at Barsebaeck NPP to analyse and improve the maintenance work. As maintenance work can't be seen as an isolated area, the rest of the plant organisation is included in the presentation. (author) figs., tabs

  6. Efficiency Evaluation of Energy Systems

    CERN Document Server

    Kanoğlu, Mehmet; Dinçer, İbrahim

    2012-01-01

    Efficiency is one of the most frequently used terms in thermodynamics, and it indicates how well an energy conversion or process is accomplished. Efficiency is also one of the most frequently misused terms in thermodynamics and is often a source of misunderstanding. This is because efficiency is often used without being properly defined first. This book intends to provide a comprehensive evaluation of various efficiencies used for energy transfer and conversion systems including steady-flow energy devices (turbines, compressors, pumps, nozzles, heat exchangers, etc.), various power plants, cogeneration plants, and refrigeration systems. The book will cover first-law (energy based) and second-law (exergy based) efficiencies and provide a comprehensive understanding of their implications. It will help minimize the widespread misuse of efficiencies among students and researchers in energy field by using an intuitive and unified approach for defining efficiencies. The book will be particularly useful for a clear ...

  7. Encapsulation Efficiency, Oscillatory Rheometry

    Directory of Open Access Journals (Sweden)

    Z. Mohammad Hassani

    2014-01-01

    Full Text Available Nanoliposomes are one of the most important polar lipid-based nanocarriers which can be used for encapsulation of both hydrophilic and hydrophobic active compounds. In this research, nanoliposomes based on lecithin-polyethylene glycol-gamma oryzanol were prepared by using a modified thermal method. Only one melting peak in DSC curve of gamma oryzanol bearing liposomes was observed which could be attributed to co-crystallization of both compounds. The addition of gamma oryzanol, caused to reduce the melting point of 5% (w/v lecithin-based liposome from 207°C to 163.2°C. At high level of lecithin, increasing of liposome particle size (storage at 4°C for two months was more obvious and particle size increased from 61 and 113 to 283 and 384 nanometers, respectively. The encapsulation efficiency of gamma oryzanol increased from 60% to 84.3% with increasing lecithin content. The encapsulation stability of oryzanol in liposome was determined at different concentrations of lecithin 3, 5, 10, 20% (w/v and different storage times (1, 7, 30 and 60 days. In all concentrations, the encapsulation stability slightly decreased during 30 days storage. The scanning electron microscopy (SEM images showed relatively spherical to elliptic particles which indicated to low extent of particles coalescence. The oscillatory rheometry showed that the loss modulus of liposomes were higher than storage modulus and more liquid-like behavior than solid-like behavior. The samples storage at 25°C for one month, showed higher viscoelastic parameters than those having been stored at 4°C which were attributed to higher membrane fluidity at 25°C and their final coalescence.Nanoliposomes are one of the most important polar lipid based nanocarriers which can be used for encapsulation of both hydrophilic and hydrophobic active compounds. In this research, nanoliposomes based on lecithin-polyethylene glycol-gamma oryzanol were prepared by using modified thermal method. Only one

  8. Stirling engine with air working fluid

    Science.gov (United States)

    Corey, John A.

    1985-01-01

    A Stirling engine capable of utilizing air as a working fluid which includes a compact heat exchange module which includes heating tube units, regenerator and cooler positioned about the combustion chamber. This arrangement has the purpose and effect of allowing the construction of an efficient, high-speed, high power-density engine without the use of difficult to seal light gases as working fluids.

  9. Eficienţa economică a programării şi urmăririi automate a lucrărilor în execuţia drumurilor forestiere. [Economic efficiency of automatic planning and control of works in the execution of forest roads

    Directory of Open Access Journals (Sweden)

    Bereziuc R

    2003-07-01

    Full Text Available The paper presents the prospect of forest roads network system development and examines the actual management of theirs execution. We suggest the extension of automatic planning and control with addition of specific charts. The research showed that, in contrast with actual methods, automatic planning may guides to economic efficiency, regarding manual and mechanized labour – with 30 % reduction in execution time and a 35 % cut in cost

  10. Struggling at work

    DEFF Research Database (Denmark)

    Hjarsbech, Pernille U; Nielsen, Maj Britt D.; Andersen, Malene Friis

    2015-01-01

    Purpose: Little is known on how employees at work with mental health problems experience their work environment. This study explores how a selected sample of Danish employees with depressive symptoms experience the interaction with their work environment and how they respond to and deal...... with problems at work. Methods: From a survey study on work and mental health in Denmark, we invited participants for in-depth interviews. Using grounded theory, we conducted 13 semi structured interviews with employees, at work, experiencing depressive symptoms. Findings: Work was pivotal for the informants...... is a key element for employees with depressive symptoms struggling at work. Practitioners and other health and rehabilitation practitioners working with people with depressive symptoms and other mental health problems could inquire about supervisor's behaviour and relation between supervisors and employees...

  11. Making residency work hour rules work.

    Science.gov (United States)

    Cohen, I Glenn; Czeisler, Charles A; Landrigan, Christopher P

    2013-01-01

    In July 2011, the ACGME implemented new rules that limit interns to 16 hours of work in a row, but continue to allow 2nd-year and higher resident physicians to work for up to 28 consecutive hours. Whether the ACGME's 2011 work hour limits went too far or did not go far enough has been hotly debated. In this article, we do not seek to re-open the debate about whether these standards get matters exactly right. Instead, we wish to address the issue of effective enforcement. That is, now that new work hour limits have been established, and given that the ACGME has been unable to enforce work hour limits effectively on its own, what is the best way to make sure the new limits are followed in order to reduce harm to residents, patients, and others due to sleep-deprived residents? We focus on three possible national approaches to the problem, one rooted in funding, one rooted in disclosure, and one rooted in tort law. © 2013 American Society of Law, Medicine & Ethics, Inc.

  12. High-Efficiency Klystron Design for the CLIC Project

    CERN Document Server

    Mollard, Antoine; Peauger, Franck; Plouin, Juliette; Beunas, Armel; Marchesin, Rodolphe

    2017-01-01

    The CLIC project requests new type of RF sources for the high power conditioning of the accelerating cavities. We are working on the development of a new kind of high-efficiency klystron to fulfill this need. This work is performed under the EuCARD-2 European program and involves theoretical and experimental study of a brand new klystron concept.

  13. Work Practice Characteristics

    DEFF Research Database (Denmark)

    Pors, Jens Kaaber; Simonsen, Jesper

    2003-01-01

    and work practice. To understand these issues a framework of characteristics is identified and termed work practice characteristics to describe important aspects of the hybrid configuration of groupware and situated work practices. Drawing on concepts and work practice studies in the field of computer...... investigation of how groupware is employed to support new ways of working in a large European financial organisation are analysed to illustrate situations with high and low integration of groupware. The framework of work practice characteristics is discussed in the light of these findings and implications...

  14. USE Efficiency -- Universities and Students for Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Melandri, Daniela

    2010-09-15

    Universities and Student for Energy Efficiency is a European Project within the Intelligent Energy Programme. It intends to create a common stream for energy efficiency systems in university buildings. Universities and students are proposed as shining examples for energy efficiency solutions and behaviour. The Project involves 10 countries and has the aim to improve energy efficiency in university buildings. Students are the main actors of the project together with professors and technicians. To act on students means to act on direct future market players in diffusion of public opinions. A strong communication action supports the succeeding of the action.

  15. Domestic Work: Challenges for Decent Work

    Directory of Open Access Journals (Sweden)

    Solange Sanches

    2009-09-01

    Full Text Available This article presents an overview of the situation of the domestic workers and focuses on some issues related to its dimension in the world and in Brazil, to their conditions of work and its importance to the labor market and to the households. We aim to demonstrate the relevance of the concept of decent work, promoted by ILO – International Labor Organization, for the domestic work and the need to extend their rights to level them with the other workers. It also highlights the opportunity offered by the next International Labor Conference, in 2010, when one of the issues of the agenda is to discuss the crafting and adoption of international labor standards in the form of a specific convention or recommendation.

  16. Energy efficiency in Swedish industry

    International Nuclear Information System (INIS)

    Zhang, Shanshan; Lundgren, Tommy; Zhou, Wenchao

    2016-01-01

    This paper assesses energy efficiency in Swedish industry. Using unique firm-level panel data covering the years 2001–2008, the efficiency estimates are obtained for firms in 14 industrial sectors by using data envelopment analysis (DEA). The analysis accounts for multi-output technologies where undesirable outputs are produced alongside with the desirable output. The results show that there was potential to improve energy efficiency in all the sectors and relatively large energy inefficiencies existed in small energy-use industries in the sample period. Also, we assess how the EU ETS, the carbon dioxide (CO_2) tax and the energy tax affect energy efficiency by conducting a second-stage regression analysis. To obtain consistent estimates for the regression model, we apply a modified, input-oriented version of the double bootstrap procedure of Simar and Wilson (2007). The results of the regression analysis reveal that the EU ETS and the CO_2 tax did not have significant influences on energy efficiency in the sample period. However, the energy tax had a positive relation with the energy efficiency. - Highlights: • We use DEA to estimate firm-level energy efficiency in Swedish industry. • We examine impacts of climate and energy policies on energy efficiency. • The analyzed policies are Swedish carbon and energy taxes and the EU ETS. • Carbon tax and EU ETS did not have significant influences on energy efficiency. • The energy tax had a positive relation with energy efficiency.

  17. Efficient Monitoring of CRAB Jobs at CMS

    Energy Technology Data Exchange (ETDEWEB)

    Silva, J. M.D. [Sao Paulo, IFT; Balcas, J. [Caltech; Belforte, S. [INFN, Trieste; Ciangottini, D. [INFN, Perugia; Mascheroni, M. [Fermilab; Rupeika, E. A. [Vilnius U.; Ivanov, T. T. [Sofiya U.; Hernandez, J. M. [Madrid, CIEMAT; Vaandering, E. [Fermilab

    2017-11-22

    CRAB is a tool used for distributed analysis of CMS data. Users can submit sets of jobs with similar requirements (tasks) with a single request. CRAB uses a client-server architecture, where a lightweight client, a server, and ancillary services work together and are maintained by CMS operators at CERN. As with most complex software, good monitoring tools are crucial for efficient use and longterm maintainability. This work gives an overview of the monitoring tools developed to ensure the CRAB server and infrastructure are functional, help operators debug user problems, and minimize overhead and operating cost. This work also illustrates the design choices and gives a report on our experience with the tools we developed and the external ones we used.

  18. Exposure to wet work in working Australians.

    Science.gov (United States)

    Keegel, Tessa G; Nixon, Rosemary L; LaMontagne, Anthony D

    2012-02-01

    The Australian National Hazard Exposure Worker Surveillance (NHEWS) Survey 2008 was a cross-sectional survey undertaken by Safe Work Australia to inform the development of exposure prevention initiatives for occupational disease. This is a descriptive study of workplace exposures. To assess the occupational and demographic characteristics of workers reporting exposure to wet work. Computer-assisted telephone interviews were conducted with 4500 workers. Two wet work exposure outcomes (frequent washing of hands and duration of time spent at work with the hands immersed in liquids) were analysed. The response rate for the study was 42.3%. For hand-washing, 9.8% [95% confidence interval (CI) 8.9-10.7] reported washing their hands more than 20 times per day. For immersion of hands in liquids, 4.5% (95% CI 3.9-5.1) reported immersion for more than 2 hr per day. Females were more likely to report exposure to frequent hand-washing than males [odds ratio (OR) 1.97, 95% CI 1.49-2.61]. Workers in the lowest occupational skill level jobs were more likely to report increased exposure to hands immersed in liquids than those in the highest (OR 6.41, 95% CI 3.78-10.88). Workers reporting skin exposure to chemicals were more likely to report exposure to hand-washing (OR 3.68, 95% CI 2.91-4.66) and immersion of the hands in liquids (OR 4.09, 95% CI 2.92-5.74). Specific groups of workers reported high levels of exposure to wet work. There were differences between the profiles of workers reporting frequent hand-washing and workers reporting increased duration of exposure to hands immersed in liquids. We also found a high correlation between wet work and chemical exposure. © 2011 John Wiley & Sons A/S.

  19. Make Markets Work for Climate

    International Nuclear Information System (INIS)

    2006-11-01

    In developing countries with rapidly growing economies, energy consumption will more than triple by 2030. This will require more than 8 trillion euros in investments in energy in these countries. The way these investments are made will be crucial in determining whether greenhouse gas emissions will rise proportionately. By creating a worldwide, lucrative market for clean technologies, countries can use the money they set aside for fighting climate change to stimulate large-scale private investment in clean energy production and efficient energy consumption. A well-functioning market ensures that money is invested where it will be the most cost-effective and will have the greatest impact in helping to solve a generally recognised problem. This also means making sure that innovations get to the market, so as to take advantage of economies of scale. The conference on 16 and 17 October 2006 in Amsterdam was the official start of the collaboration of governments, business and financial institutions to Make Markets Work for Climate. At the conference it was underlined that coordinated strategies are needed for international financial institutions, private banks, private investors and governments. Business and governments stand shoulder to shoulder in shaping the much needed actions on climate change. The participants agreed that potentially profitable opportunities exist for investment in commercial technologies in developing countries, especially aimed at energy efficiency. An enabling environment is needed in developing countries to attract funds for clean energy. Attention should be paid to less-developed countries. They have difficulty profiting from the current CDM market and are unable to compete on the technology learning curve. In order to make markets work for climate there is a strong need for long-term continuity in the carbon market beyond 2012. Governments need to create stable incentives for business to invest in clean energy technologies. Business is ready

  20. MULTIPLE LINEAR REGRESSION ANALYSIS FOR PREDICTION OF BOILER LOSSES AND BOILER EFFICIENCY

    OpenAIRE

    Chayalakshmi C.L

    2018-01-01

    MULTIPLE LINEAR REGRESSION ANALYSIS FOR PREDICTION OF BOILER LOSSES AND BOILER EFFICIENCY ABSTRACT Calculation of boiler efficiency is essential if its parameters need to be controlled for either maintaining or enhancing its efficiency. But determination of boiler efficiency using conventional method is time consuming and very expensive. Hence, it is not recommended to find boiler efficiency frequently. The work presented in this paper deals with establishing the statistical mo...

  1. Technical papers: regional indicators of efficiency for the CO2 and the renewable energies development

    International Nuclear Information System (INIS)

    2004-01-01

    This work is based on the methodology of efficiency indicators definition, developed by the ADEME. These indicators aim to allow the control and the monitoring of regional tendencies of the energy efficiency and the CO 2 efficiency and also to be used for a common base to compare the regions according the performance criteria in matter of energy efficiency and CO 2 efficiency. (A.L.B.)

  2. The Multiple Benefits of Measures to Improve Energy Efficiency

    DEFF Research Database (Denmark)

    Puig, Daniel; Farrell, Timothy Clifford

    Understanding the barriers to, and enablers for, energy efficiency requires targeted information and analysis. This report is a summary of four detailed studies providing new insights on how to promote efficiency in selected priority areas. It complements initiatives such as the so-called energy...... efficiency accelerators, which seek to increase the uptake of selected technologies, as well as the work of many other institutions committed to improving energy efficiency. The modelling estimates and the case studies presented in this report illustrate that, while significant progress has already been...... achieved, the case for accelerating energy efficiency action is strong. Key highlights include: • At the global level, energy efficiency improvements would account for between 2.6 and 3.3 Gt CO2e of the reductions in 2030, equivalent to between 23 and 26 percent of the overall reductions achieved...

  3. New approach for calibration the efficiency of HPGe detectors

    International Nuclear Information System (INIS)

    Alnour, I.A.; Wagiran, H.; Suhaimi Hamzah; Siong, W.B.; Mohd Suhaimi Elias

    2013-01-01

    Full-text: This work evaluates the efficiency calibrating of HPGe detector coupled with Canberra GC3018 with Genie 2000 software and Ortec GEM25-76-XLB-C with Gamma Vision software; available at Neutron activation analysis laboratory in Malaysian Nuclear Agency (NM). The efficiency calibration curve was constructed from measurement of an IAEA, standard gamma point sources set composed by 214 Am, 57 Co, 133 Ba, 152 Eu, 137 Cs and 60 Co. The efficiency calibrations were performed for three different geometries: 5, 10 and 15 cm distances from the end cap detector. The polynomial parameters functions were simulated through a computer program, MATLAB in order to find an accurate fit to the experimental data points. The efficiency equation was established from the known fitted parameters which allow for the efficiency evaluation at particular energy of interest. The study shows that significant deviations in the efficiency, depending on the source-detector distance and photon energy. (author)

  4. NCPC Commemorative Works Catalog

    Data.gov (United States)

    National Capital Planning Commission — The CWC is a complete list of Washington DC's commemorative works on federal land. Each record includes a work's title, location, a short description of its purpose,...

  5. Identity Work and Emotions

    DEFF Research Database (Denmark)

    Winkler, Ingo

    2018-01-01

    This paper reviews the empirical literature on identity work and identifies two distinct approaches to incorporating emotion. The majority of empirical studies use emotion to describe the experiences of identity work. In doing so, the authors (a) mention the emotions that people feel in situations...... that trigger identity work, (b) illustrate identity work as an emotional endeavour, and (c) describe the emotional impact of successful and unsuccessful identity work. There is also an emerging literature that examines the mutual constitution of emotions and identity work. These authors address emotional...... labour, affective social identification, emotional attachment and detachment, and humour when studying identity work. This paper suggests that, to understand better the relation between emotions and identity work, future research should examine the role of emotions in problematizing identity...

  6. Group Work Publication-1991.

    Science.gov (United States)

    Zimpfer, David G.

    1992-01-01

    Lists 21 new publications in group work, of which 9 are reviewed. Those discussed include publications on group counseling and psychotherapy, structured groups, support groups, psychodrama, and social group work. (Author/NB)

  7. Working during cancer treatment

    Science.gov (United States)

    ... medlineplus.gov/ency/patientinstructions/000834.htm Working during cancer treatment To use the sharing features on this page, ... JavaScript. Many people continue to work throughout their cancer treatment. Cancer, or the side effects of treatment, may ...

  8. Minimizing Exposure at Work

    Science.gov (United States)

    ; Environment Human Health Animal Health Safe Use Practices Food Safety Environment Air Water Soil Wildlife Home Page Pesticide Health and Safety Information Safe Use Practices Minimizing Exposure at Work Pesticides - Pennsylvania State University Cooperative Extension Personal Protective Equipment for Working

  9. Pregnancy and work

    Science.gov (United States)

    ... may need to stop working or reduce your work hours. Most women are advised to only lift things that weigh under 20 pounds (9 kilograms) during pregnancy. Repetitively lifting heavier amounts often causes back injury or disability.

  10. Interdisciplinary Work in Schools

    DEFF Research Database (Denmark)

    Tofteng, Ditte Maria Børglum; Rasmussen, Gitte Lyng

    In a Danish school or institutional context there is a variety of professionals working around children’s lives, both as a part of an ordinary child life and when there are cognitive or social challenges connected to this life. Thus, the professionals are often working closely together in both......, combined with their more formal organizational affiliation. In this way, professionals can be working directly within the school or institution, or they can be in a supportive role being formally affiliated to the local council. Both these types of affiliations entail interdisciplinary cooperation......, interdisciplinary work is part of the new vision of how welfare systems can work more effectively and successfully, and in this logic, it is framed as a new standard for working systematically and consistently with cases. Hence, interdisciplinary work also represents a meaningful way of working with cases...

  11. Product Work Breakdown Structure

    National Research Council Canada - National Science Library

    Okayama, Y; Chirillo, L. D

    1980-01-01

    .... Any such subdivision scheme is a work breakdown structure. Traditional shipbuilders employ work subdivisions by ships functional systems which are natural and appropriate for estimating and for early design stages...

  12. Catalyzing Innovation in Social Work Practice

    Science.gov (United States)

    Traube, Dorian E.; Begun, Stephanie; Okpych, Nathanael; Choy-Brown, Mimi

    2017-01-01

    Social innovation is defined by novelty and improvement. This definition requires social work practice to be more effective or efficient than preexisting alternatives. Practice innovation is accomplished by leveraging technical, social, and economic factors to generate novel interventions, diffusion or adoption of the interventions into broader…

  13. Digital vs. conventional implant impressions: efficiency outcomes.

    Science.gov (United States)

    Lee, Sang J; Gallucci, German O

    2013-01-01

    The aim of this pilot study was to evaluate the efficiency, difficulty and operator's preference of a digital impression compared with a conventional impression for single implant restorations. Thirty HSDM second year dental students performed conventional and digital implant impressions on a customized model presenting a single implant. The outcome of the impressions was evaluated under an acceptance criteria and the need for retake/rescan was decided. The efficiency of both impression techniques was evaluated by measuring the preparation, working, and retake/scan time (m/s) and the number of retakes/rescans. Participants' perception on the level of difficulty for the both impressions was assessed with a visual analogue scale (VAS) questionnaire. Multiple questionnaires were obtained to assess the participants' perception on preference, effectiveness and proficiency. Mean total treatment time was of 24:42 m/s for conventional and 12:29 m/s for digital impressions (P impressions (P impression (P impression technique and 30.63 (±17.57) for digital impression technique (P = 0.006). Sixty percent of the participants preferred the digital impression, 7% the conventional impression technique and 33% preferred either technique. Digital impressions resulted in a more efficient technique than conventional impressions. Longer preparation, working, and retake time were consumed to complete an acceptable conventional impression. Difficulty was lower for the digital impression compared with the conventional ones when performed by inexperienced second year dental students. © 2012 John Wiley & Sons A/S.

  14. Work-Life Balance

    OpenAIRE

    Kvasničková, Katarína

    2011-01-01

    The subject of this thesis is Work-Life Balance - the reconciliation of professional and personal lives. The primary objective of this work is to analyze employee satisfaction in achieving a balance between the professional and personal life and to develop recommendations for employer on that basis. The theoretical portion of this work defines the issues surrounding Work-Life Balance and tools that employees can use to harmonize the two with an analysis of applications in the Czech Republic a...

  15. To work or not to work

    NARCIS (Netherlands)

    Patricia van Echtelt; Stella Hoff

    2008-01-01

    Original title: Wel of niet aan het werk. 'More people in paid work' is the central policy objective of the Dutch government in relation to employment. In order to achieve this goal, it is necessary to know what prevents non-workers from joining the labour process, and what prevents workers

  16. Towards highly efficient water photoelectrolysis

    Science.gov (United States)

    Elavambedu Prakasam, Haripriya

    The motivation for this work was to develop an efficient and relatively inexpensive material architecture suitable for solar water splitting by photoelectrolysis. Iron (III) Oxide (hematite), has bandgap energy (˜ 2.2 eV) well suited for capturing solar spectrum, is abundant and non-toxic. However, it suffers from recombination losses due to low electron mobility and a minority carrier diffusion length of only 2--4 nm. The primary focus of this dissertation was to synthesize thin walled, self-aligned, vertically oriented nanotubular/nanoporous iron (III) oxide structures through electrochemical oxidation. The underlying hypothesis was that thin walled nanotubes would allow charge separation prior to recombination, resulting in a significant increase in the photoelectrochemical properties. Both aqueous and non-aqueous electrolytes were explored as an electrochemical oxidation solvent. Iron oxide film topologies achieved include nanopillar, nanoporous and nanoplatelet structures from aqueous electrolytes, and nanoporous and nanochannel architectures from non-aqueous electrolytes. This dissertation encompasses the first report on synthesis of nanoporous/nanochannel iron (III) oxide structures through potentiostatic anodization, as well as the use of ethylene glycol for the electrochemical oxidation of both iron and titanium. Through control of anodization parameters, including potential and anodization bath composition, excellent control over the morphology and dimensions of the synthesized iron (III) nanostructures have been achieved. As dependent upon the applied potential and electrolytic composition, diameters of the self-aligned nanopores range from 30 nm to 250 nm. The synthesized structures were crystallized in nitrogen ambient to form hematite photoanodes; a maximum photocurrent efficiency of 0.73% was obtained from nanoporous iron (III) oxide synthesized using a glycerol anodization bath. The electrochemical oxidation of titanium in fluoride ion containing

  17. Motivational Orientations in Work

    Science.gov (United States)

    Murtonen, Mari; Olkinuora, Erkki; Palonen, Tuire; Hakkarainen, Kai; Lehtinen, Erno

    2008-01-01

    The rapid development in working life during recent decades has changed the structures of work organisations and expectations of employees' work. Differing forms of professional employment and different types of organisational environments likely promote different types of motivational patterns in workers. The aim of this study was to apply a…

  18. Reasoning=working Memoryattention

    Science.gov (United States)

    Buehner, M.; Krumm, S.; Pick, M.

    2005-01-01

    The purpose of this study was to clarify the relationship between attention, components of working memory, and reasoning. Therefore, twenty working memory tests, two attention tests, and nine intelligence subtests were administered to 135 students. Using structural equation modeling, we were able to replicate a functional model of working memory…

  19. Working hours and productivity

    NARCIS (Netherlands)

    Collewet, Marion; Sauermann, Jan

    2017-01-01

    This paper studies the link between working hours and productivity using daily information on working hours and performance of a sample of call centre agents. We exploit variation in the number of hours worked by the same employee across days and weeks due to central scheduling, enabling us to

  20. Alternative Work Schedules: Definitions

    Science.gov (United States)

    Journal of the College and University Personnel Association, 1977

    1977-01-01

    The term "alternative work schedules" encompasses any variation of the requirement that all permanent employees in an organization or one shift of employees adhere to the same five-day, seven-to-eight-hour schedule. This article defines staggered hours, flexible working hours (flexitour and gliding time), compressed work week, the task system, and…

  1. Worth the work

    NARCIS (Netherlands)

    Mariëlle Cloïn

    2010-01-01

    Original title: Het werken waard. Why do lower educated women work outside the home less often than higher educated women? And why are lower educated women overrepresented in the smallest part-time jobs? Is it not financially worthwhile for lower educated women to work or to work a lot of

  2. Working Group 7 Summary

    Energy Technology Data Exchange (ETDEWEB)

    Nagaitsev S.; Berg J.

    2012-06-10

    The primary subject of working group 7 at the 2012 Advanced Accelerator Concepts Workshop was muon accelerators for a muon collider or neutrino factory. Additionally, this working group included topics that did not fit well into other working groups. Two subjects were discussed by more than one speaker: lattices to create a perfectly integrable nonlinear lattice, and a Penning trap to create antihydrogen.

  3. Introduction: people at work

    NARCIS (Netherlands)

    Peeters, M.C.W.; Jonge, de J.; Taris, A.W.; Peeters, M.; Jonge, de J.; Taris, T.

    2014-01-01

    For as long as mankind has existed, people have worked. Needless to say the nature of work has changed tremendously: our ancestors were mostly hunters and collectors, nowadays people work with data, ‘goods’ or other people, or provide services. What has not changed is that we still spend a

  4. Does Leave Work?

    NARCIS (Netherlands)

    Heleen van Luijn; Saskia Keuzenkamp

    2004-01-01

    More and more people have to combine work and care responsibilities, and work part-time or use daycare and after-school care facilities to help them do so. The Work and Care Act, which came into force on 1 December 2001, combined all the existing schemes - such as parental and maternity leave -

  5. The Good Work.

    Science.gov (United States)

    Csikszentmihalyi, Mihaly

    2003-01-01

    Examines the working lives of geneticists and journalists to place into perspective what lies behind personal ethics and success. Defines "good work" as productive activity that is valued socially and loved by people engaged in it. Asserts that certain cultural values, social controls, and personal standards are necessary to maintain good work and…

  6. Working with Ted

    Science.gov (United States)

    Evans, Paula

    2009-01-01

    The author never worked "with" a boss before working with Ted at Brown University. She had always known of Ted--he was Dean at Harvard Graduate School of Education when she was a student there, just beginning her teaching career. Ted arrived at Brown University in September 1984. She was working at Brown in President Howard Swearer's…

  7. Authenticity at work

    NARCIS (Netherlands)

    van den Bosch, Ralph

    2016-01-01

    Authenticity at work, loosely defined as the degree to which an individual stays true to their core self, has impact on workers in the workplace. This thesis shows that authenticity at work can be measured with a reliable and valid instrument: the IAM Work. Furthermore, results of this thesis show

  8. A Work Journal.

    Science.gov (United States)

    Dickson, Katherine Murphy

    2002-01-01

    Explains how keeping a work journal can be useful in exploring one's thoughts and feelings about work challenges and work decisions by facilitating self-renewal, change, and job satisfaction. Includes an example that discusses issues of interest to middle career librarians including the challenge of technology, further education, professional…

  9. Work Begins at School.

    Science.gov (United States)

    Casto, James E.

    2001-01-01

    Students at Clay County High School (West Virginia) get real-world work experience through the school's comprehensive School-to-Work program, now in its third year. Given the limited job availability in this poor rural area, the school supplements work-site experiences with school-based business enterprises, student construction projects, and…

  10. Work-related stress

    NARCIS (Netherlands)

    Houtman, I.L.D.

    2005-01-01

    Changes in the content and organisation of work in recent decades have resulted in an intensification of work, which is commonly regarded as a cause of stress. This report presents trends in the risks and consequences of work-related stress, and identifies how these can be prevented. The focus

  11. Energy Efficient Mobile Operating Systems

    OpenAIRE

    Muhammad Waseem

    2013-01-01

    Energy is an important resource in mobile computers now days. It is important to manage energy in efficient manner so that energy consumption will be reduced. Developers of operating system decided to increase the battery life time of mobile phones at operating system level. So, design of energy efficient mobile operating system is the best way to reduce the energy consumption in mobile devices. In this paper, currently used energy efficient mobile operating system is discussed and compared. ...

  12. Energy efficiency policies and measures

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This document makes a review of the energy efficiency and demand side management (DSM) policies and measures in European Union countries and Norway in 1999: institutional changes, measures and programmes, budget, taxation, existence of a national DSM programme, national budgets for DSM programmes, electricity pricing: energy/environment tax, national efficiency standards and regulation for new electrical appliances, implementation of Commission directives, efficiency requirements, labelling, fiscal and economic incentives. (J.S.)

  13. Promoting Energy Efficiency Best Practices in Cities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This pilot project is the first attempt to address the lack of rigorous and transparent approach to defining best practice in city energy efficiency programmes. The project has provided interesting insights into a range of exciting projects being implemented in cities around the world. However, the potential exists for far greater benefit. The study has found that it is possible to collate the detailed information needed to identify best practice energy efficiency projects in cities. However, gathering the data is not easy. The data is often not recorded in an easily accessible format. Nor is it easy to get city officials to allocate time to the necessary data collation given the many other competing demands on their time. A key area that this project identifies as requiring urgent attention is the development of a common data management format for energy efficiency projects by Cas. Further work could also focus on refining the criteria used to define best practice, and broadening the scope of projects beyond energy efficiency.

  14. ECONOMIC EFFICIENCY - DETERMINED ELEMENT IN INVESTMENT DECISION

    Directory of Open Access Journals (Sweden)

    Claudia MUNGIU-PUPAZAN

    2010-03-01

    Full Text Available Economic activity of a country are conducted by industry, under branches and production sectors, each with special characteristics and conditions of work, which, of course, put their imprint on the organization manner of the production process By an analysis of the concept of economic efficiency of investment is found that this is an amount of qualitative factors, which gives the latter a complex character, aimed to improving activity in the area where are taking place to the putting into service of such investment, which can be modernization, bringing new equipments, reconstruction and development. Study the economic efficiency of investment involves, as a base, an analysis of causal factors that determine the decision in the afferent medium of risk. Corresponding to peculiarities of the production process, it requires a proper methodology of assessment the economic efficiency of investment, with specification to maintain the general principles for calculating the economic efficiency indicators and specific indicators come only to complete the picture of indicators of general, basic and supplementary already calculated in order to provide additional clues, afferent to branch, under-branch or sector of activity.

  15. Modeling of alpha mass-efficiency curve

    International Nuclear Information System (INIS)

    Semkow, T.M.; Jeter, H.W.; Parsa, B.; Parekh, P.P.; Haines, D.K.; Bari, A.

    2005-01-01

    We present a model for efficiency of a detector counting gross α radioactivity from both thin and thick samples, corresponding to low and high sample masses in the counting planchette. The model includes self-absorption of α particles in the sample, energy loss in the absorber, range straggling, as well as detector edge effects. The surface roughness of the sample is treated in terms of fractal geometry. The model reveals a linear dependence of the detector efficiency on the sample mass, for low masses, as well as a power-law dependence for high masses. It is, therefore, named the linear-power-law (LPL) model. In addition, we consider an empirical power-law (EPL) curve, and an exponential (EXP) curve. A comparison is made of the LPL, EPL, and EXP fits to the experimental α mass-efficiency data from gas-proportional detectors for selected radionuclides: 238 U, 230 Th, 239 Pu, 241 Am, and 244 Cm. Based on this comparison, we recommend working equations for fitting mass-efficiency data. Measurement of α radioactivity from a thick sample can determine the fractal dimension of its surface

  16. MILITARY MISSION COMBAT EFFICIENCY ESTIMATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Ighoyota B. AJENAGHUGHRURE

    2017-04-01

    Full Text Available Military infantry recruits, although trained, lacks experience in real-time combat operations, despite the combat simulations training. Therefore, the choice of including them in military operations is a thorough and careful process. This has left top military commanders with the tough task of deciding, the best blend of inexperienced and experienced infantry soldiers, for any military operation, based on available information on enemy strength and capability. This research project delves into the design of a mission combat efficiency estimator (MCEE. It is a decision support system that aids top military commanders in estimating the best combination of soldiers suitable for different military operations, based on available information on enemy’s combat experience. Hence, its advantages consist of reducing casualties and other risks that compromises the entire operation overall success, and also boosting the morals of soldiers in an operation, with such information as an estimation of combat efficiency of their enemies. The system was developed using Microsoft Asp.Net and Sql server backend. A case study test conducted with the MECEE system, reveals clearly that the MECEE system is an efficient tool for military mission planning in terms of team selection. Hence, when the MECEE system is fully deployed it will aid military commanders in the task of decision making on team members’ combination for any given operation based on enemy personnel information that is well known beforehand. Further work on the MECEE will be undertaken to explore fire power types and impact in mission combat efficiency estimation.

  17. Maritime Work and Communication

    Directory of Open Access Journals (Sweden)

    Peter Andersen

    2001-05-01

    Full Text Available This paper presents findings from the project "Elastic Systems" under the Danish Center for Human Machine Interaction. The project aims at developing methods for analyzing dynamic maritime work processes and for designing flexible instrument interfaces that will support changing work environments. Here I only address the former issue, the design issues being published elsewhere, e.g. in Andersen(1999 and Andersen & May (2001. More data can be found in Andersen(2000. The purpose of the present paper is twofold: (1 to present characteristics of maritime work and communication, and (2 to suggest a conceptual framework that covers communicative as well as non-communicative acts. The latter purpose is motivated in two ways. Theoretical motivation: we know that language is self-referential, so that it can speak of non-linguistic entities like ships and waves as well as its own properties, such as the correct wording or style. The easiest way to accomplish this is for language to treat both domains in a similar way. The other motivation is more practical: it is a fact that communication and physical actions are interwoven in maritime work, and a theory that builds on a sharp distinction between these two kinds of behaviors will miss this basic characteristic. The data is from a voyage aboard Sally Maersk from Algeciras to Goteborg and back to Rotterdam. We recorded 60 hours of high quality video, and the paper builds upon a 16 hours trip from Felixstowe to Rotterdam, supplemented by data from simulated voyages in the simulator at the Danish Maritime Institute. The conceptual framework is based on Lind 1994 and Lind 2000 and distinguishes between the following types of action types: (1 Prevent(suppress, avoid: if I hadn't done it, then an undesirable state would have developed. Prevent drifting by using auxiliary rudder. (2 Maintain: if I hadn't done it, then a desirable state would have disappeared. Maintain course. (3 Help: a positive state would have

  18. Efficiency, sustainability and global warming

    International Nuclear Information System (INIS)

    Woodward, Richard T.; Bishop, Richard C.

    1995-01-01

    Economic analyses of global warming have typically been grounded in the theory of economic efficiency. Such analyses may be inappropriate because many of the underlying concerns about climate change are rooted not in efficiency, but in the intergenerational allocation of economic endowments. A simple economic model is developed which demonstrates that an efficient economy is not necessarily a sustainable economy. This result leads directly to questions about the policy relevance of several economic studies of the issue. We then consider policy alternatives to address global warming in the context of economies with the dual objectives of efficiency and sustainability, with particular attention to carbon-based taxes

  19. Another link to improving the working environment in acute care hospitals: registered nurses' spirit at work.

    Science.gov (United States)

    Urban, Ann-Marie; Wagner, Joan I

    2013-12-01

    Hospitals are situated within historical and socio-political contexts; these influence the provision of patient care and the work of registered nurses (RNs). Since the early 1990s, restructuring and the increasing pressure to save money and improve efficiency have plagued acute care hospitals. These changes have affected both the work environment and the work of nurses. After recognizing this impact, healthcare leaders have dedicated many efforts to improving the work environment in hospitals. Admirable in their intent, these initiatives have made little change for RNs and their work environment, and thus, an opportunity exists for other efforts. Research indicates that spirit at work (SAW) not only improves the work environment but also strengthens the nurse's power to improve patient outcomes and contribute to a high-quality workplace. In this paper, we present findings from our research that suggest SAW be considered an important component in improving the work environment in acute care hospitals.

  20. An Evolutionary Efficiency Alternative to the Notion of Pareto Efficiency

    NARCIS (Netherlands)

    I.P. van Staveren (Irene)

    2012-01-01

    textabstractThe paper argues that the notion of Pareto efficiency builds on two normative assumptions: the more general consequentialist norm of any efficiency criterion, and the strong no-harm principle of the prohibition of any redistribution during the economic process that hurts at least one

  1. Energy efficient elevators and escalators

    Energy Technology Data Exchange (ETDEWEB)

    Patrao, Carlos; Fong, Joao; Almeida, Anibal de (Dep. Electrical Engineering, Univ. of Coimbra, Coimbra (Portugal)); Rivet, Luc

    2009-07-01

    Elevators and escalators are the crucial element that makes it practical to live and work several floors above ground - more than 4,3 million units are installed in Europe. Due to ageing of the European population the installation of elevators in single family houses is experiencing a significant growth, as well as equipping existing buildings. Elevators use about 4% of the electricity in tertiary sector buildings. High untapped saving potentials exist with respect to energy-efficient technologies, investment decisions and behavioural approaches, in these sectors. This paper presents preliminary results from the IEE project E4, whose overall objective is the improvement of the energy performance of elevators and escalators, in tertiary sector buildings and in multi family residential buildings. The project is characterizing people conveyors electricity consumption in the tertiary sector and in residential buildings in the EU. The installed park is characterised by a survey among elevators national associations in each country. An assessment of the barriers has been made in the first phase of the project and will be presented. Monitoring campaigns in elevators and escalators are being conducted in each country according to a common developed methodology. More than fifty elevators and escalators will be audited. This will allow the collection of load curves (start up, travel up and down, travel full and empty), including the characterization of standby consumption. Standby consumption of an elevator can represent up to 80% of the total energy consumed per year, and can be drastically reduced. This paper presents the preliminary results of the first ten audits performed in Portugal by Isr-UC.

  2. Live to work or love to work: work craving and work engagement.

    Directory of Open Access Journals (Sweden)

    Kamila Wojdylo

    Full Text Available OBJECTIVE: According to the theory of work craving, a workaholic has a craving for self-worth compensatory incentives and an expectation of relief from negative affect experienced through neurotic perfectionism and an obsessive-compulsive style of working. Research has shown that workaholism and work engagement should be considered as two distinct work styles with different health consequences. However, the mechanisms underlying the adoption of these work styles have been neglected. The present study proposes that work craving and work engagement are differentially associated with self-regulatory competencies and health. In particular, we expected that the working styles mediate the relationships between emotional self-regulation and health. METHODS: In the cross-sectional study, 469 teachers from German schools completed online administered questionnaires. By means of structural equation modeling, we tested two indirect paths: a from self-relaxation deficits via work craving to poor health and b from self-motivation competencies via work engagement to good health. RESULTS: As expected, we found evidence that a the negative relationship of self-relaxation deficits on health was partially mediated by work craving and b the positive relationship of self-motivation competencies on health was partially mediated by work engagement. CONCLUSIONS: The present study emphasizes the importance of self-regulation competencies for healthy or unhealthy work styles. Whereas work craving was associated with a low ability to down-regulate negative emotions and poor health, work engagement was associated with a high ability to up-regulate positive emotions and good health.

  3. From energy efficiency towards resource efficiency within the Ecodesign Directive

    DEFF Research Database (Denmark)

    Bundgaard, Anja Marie; Mosgaard, Mette; Remmen, Arne

    2017-01-01

    on the most significant environmental impact has often resulted in a focus on energy efficiency in the use phase. Therefore, the Ecodesign Directive should continue to target resource efficiency aspects but also consider environ- mental aspects with a large improvement potential in addition to the most...... significant environmental impact. For the introduction of resource efficiency requirements into the Ecodesign Directive, these requirements have to be included in the preparatory study. It is therefore recommended to broaden the scope of the Methodology for the Ecodesign of Energy-related products and the Eco......The article examines the integration of resource efficiency into the European Ecodesign Directive. The purpose is to analyse the processes and stakeholder interactions, which formed the basis for integrating resource efficiency requirements into the implementing measure for vacuum cleaners...

  4. Stress at Work Place

    OpenAIRE

    Mohammad A. Shahrour

    2010-01-01

    One of hardest forms of stresses to avoid is that work place or job stress Job stress refers to stress experienced by an individual at or because of issues at their work place The term work related stress has many meanings and it causes different levels of anxiety. Not all challenges at work can be called stress as some of these challenges drive employees upward, and empower them to learn new skills or push them to work harder to achieve a certain goal. So, this type of challenges cannot be c...

  5. Detailed Balance Limit of Efficiency of Broadband-Pumped Lasers.

    Science.gov (United States)

    Nechayev, Sergey; Rotschild, Carmel

    2017-09-13

    Broadband light sources are a wide class of pumping schemes for lasers including LEDs, sunlight and flash lamps. Recently, efficient coupling of broadband light to high-quality micro-cavities has been demonstrated for on-chip applications and low-threshold solar-pumped lasers via cascade energy transfer. However, the conversion of incoherent to coherent light comes with an inherent price of reduced efficiency, which has yet to be assessed. In this paper, we derive the detailed balance limit of efficiency of broadband-pumped lasers and discuss how it is affected by the need to maintain a threshold population inversion and thermodynamically dictated minimal Stokes' shift. We show that lasers' slope efficiency is analogous to the nominal efficiency of solar cells, limited by thermalisation losses and additional unavoidable Stokes' shift. The lasers' power efficiency is analogous to the detailed balance limit of efficiency of solar cells, affected by the cavity mirrors and impedance matching factor, respectively. As an example we analyze the specific case of solar-pumped sensitized Nd 3+ :YAG-like lasers and define the conditions to reach their thermodynamic limit of efficiency. Our work establishes an upper theoretical limit for the efficiency of broadband-pumped lasers. Our general, yet flexible model also provides a way to incorporate other optical and thermodynamic losses and, hence, to estimate the efficiency of non-ideal broadband-pumped lasers.

  6. The efficiency of aerodynamic force production in Drosophila.

    Science.gov (United States)

    Lehmann, F O

    2001-12-01

    Total efficiency of aerodynamic force production in insect flight depends on both the efficiency with which flight muscles turn metabolic energy into muscle mechanical power and the efficiency with which this power is converted into aerodynamic flight force by the flapping wings. Total efficiency has been estimated in tethered flying fruit flies Drosophila by modulating their power expenditures in a virtual reality flight simulator while simultaneously measuring stroke kinematics, locomotor performance and metabolic costs. During flight, muscle efficiency increases with increasing flight force production, whereas aerodynamic efficiency of lift production decreases with increasing forces. As a consequence of these opposite trends, total flight efficiency in Drosophila remains approximately constant within the kinematic working range of the flight motor. Total efficiency is broadly independent of different profile power estimates and typically amounts to 2-3%. The animal achieves maximum total efficiency near hovering flight conditions, when the beating wings produce flight forces that are equal to the body weight of the insect. It remains uncertain whether this small advantage in total efficiency during hovering flight was shaped by evolutionary factors or results from functional constraints on both the production of mechanical power by the indirect flight muscles and the unsteady aerodynamic mechanisms in flapping flight.

  7. Swimming efficiency in a shear-thinning fluid

    Science.gov (United States)

    Nganguia, Herve; Pietrzyk, Kyle; Pak, On Shun

    2017-12-01

    Micro-organisms expend energy moving through complex media. While propulsion speed is an important property of locomotion, efficiency is another factor that may determine the swimming gait adopted by a micro-organism in order to locomote in an energetically favorable manner. The efficiency of swimming in a Newtonian fluid is well characterized for different biological and artificial swimmers. However, these swimmers often encounter biological fluids displaying shear-thinning viscosities. Little is known about how this nonlinear rheology influences the efficiency of locomotion. Does the shear-thinning rheology render swimming more efficient or less? How does the swimming efficiency depend on the propulsion mechanism of a swimmer and rheological properties of the surrounding shear-thinning fluid? In this work, we address these fundamental questions on the efficiency of locomotion in a shear-thinning fluid by considering the squirmer model as a general locomotion model to represent different types of swimmers. Our analysis reveals how the choice of surface velocity distribution on a squirmer may reduce or enhance the swimming efficiency. We determine optimal shear rates at which the swimming efficiency can be substantially enhanced compared with the Newtonian case. The nontrivial variations of swimming efficiency prompt questions on how micro-organisms may tune their swimming gaits to exploit the shear-thinning rheology. The findings also provide insights into how artificial swimmers should be designed to move through complex media efficiently.

  8. Incentives to improve energy efficiency in EU Grids

    Energy Technology Data Exchange (ETDEWEB)

    Papaefthymiou, G.; Beestermoeller, C.; Gardiner, A.

    2013-04-15

    The Energy Efficiency Directive (2012/27/EU) includes provisions related to network tariffs and regulation. It is timely therefore to revisit the potential options for energy efficiency in grids, the treatment of energy efficiency in network tariffs and alternative policies for improving energy efficiency. This project builds on work done previously for the European Copper Institute in this area. In this paper, we concentrate on energy efficiency in electricity network design and operation. Other articles in the Directive relate to the role of the network tariffs and regulations in enabling or incentivising the provision of energy efficiency to end users. In section 2, we describe technical efficiency measures to reduce losses (improve energy efficiency) in the grid. Section 3 reviews grid tariffs in three countries to identify whether they provide incentives or disincentives for energy efficiency in the grid. Section 4 discusses and evaluates alternative regulations for energy efficiency in grids. Section 5 concludes and discusses the main components of the optimal policy framework.

  9. 'Blue' social capital and work performance

    DEFF Research Database (Denmark)

    Grøn, Sisse; Svendsen, Gunnar Lind Haase

    2012-01-01

    (Progoulaki & Roe 2011). This challenges social capital on board, i.e. the resources inherent in network cooperation associated with norms of reciprocity and trust (Putnam 2000: 19). Fragmentizing ‘blue’ social capital should however be restored, because work performance depends on the quality of cooperation...... findings suggest that a balance between three types of social capital – bonding, bridging and linking – is needed to achieve a high-performance work system (Gittell et al. 2010). Hence, main actors within the shipping sector should take ‘blue’ social capital into account in order to increase work...... efficiency and economic performance....

  10. The Ambiguity of Work

    DEFF Research Database (Denmark)

    Humle, Didde Maria

    2014-01-01

    This article contributes to the current debate among organizational and work-life researchers on the double-sided nature of knowledge work, which offers great freedom and satisfaction on the one hand and the potential to be overly demanding and stressful on the other. This contribution involves...... drawing on the results of an ethnographic case study of a consultancy house; more specifically, it comprises an exploration of the narrative identity work of consultants as they perform work practice stories of self, work, and the organization negotiating why the work they do is both challenging...... and rewarding. The type of knowledge work explored is characterized by its immaterial nature in the sense that the primary input is the competences, knowledge, and commitment of the consultants and the output is the joy, success, and satisfaction of candidates, clients, and collaborators. The article...

  11. Final report: Efficient thyratron modulator project

    Energy Technology Data Exchange (ETDEWEB)

    R. J. Adler; R. J. Richter-Sand; C. W. Gregg

    1999-11-26

    The purpose of this program was to examine methods of increasing the efficiency of producing pulses to drive Klystrons in the 150 MW range. This may include 2 Klystrons in the 75 MW range. Specific methods of interest to improve the pulse efficiency were the use of a circuit to add energy to the tail of the pulse, the use of a bipyrimidal transformer, and the use of gas insulation as a means of improving the pulse shape. These methods were investigated using both thyratron and IGBT switching. The low cost designs developed in this work consisted of low voltage designs which don't require the oil immersion. These designs can be ''hot tuned'' based on the use of simple, tunable inductors.

  12. Energy planning and energy efficiency assistance

    Energy Technology Data Exchange (ETDEWEB)

    Markel, L. [Electrotek Concepts, Inc., Knoxville, TN (United States)

    1995-12-31

    Electrotek is an engineering services company specializing in energy-related programs. Clients are most utilities, large energy users, and the U.S. Electric Power Research Institute. Electrotek has directed energy projects for the U.S. Agency for International Development and the U.S. Department of Energy in Poland and other countries of Central Europe. The objective is to assist the host country organizations to identify and implement appropriate energy efficiency and pollution reduction technologies, to transfer technical and organizational knowledge, so that further implementations are market-driven, without needed continuing foreign investment. Electrotek has worked with the Silesian Power Distribution Company to design an energy efficiency program for industrial customers that has proven to be profitable for the company and for its customers. The program has both saved energy and costs, and reduced pollution. The program is expanding to include additional customers, without needing more funding from the U.S. government.

  13. Energy Efficiency instead of CO2 levy

    International Nuclear Information System (INIS)

    Uetz, R.

    2005-01-01

    This article takes a look at ways of avoiding a future, planned Swiss CO 2 levy by improving the efficiency of energy use. The political situation concerning the reduction of CO 2 emissions in Switzerland is reviewed and the likeliness of the introduction of a CO 2 levy is discussed. Strategies for the reduction of fossil fuel consumption and therefore of CO 2 emissions are looked at, including process optimisation. Recommendations are made on how to approach this work systematically - data collection, assessment of the potential for reduction and the planning of measures to be taken are looked at. The high economic efficiency of immediate action is stressed and typical middle and long-term measures are listed

  14. Energy Efficient Cooking - The EffiCooker

    DEFF Research Database (Denmark)

    Schjær-Jacobsen, Jørgen

    2011-01-01

    Substantial energy savings in moist heat cooking may be achieved by employing a pan with integrated electric heating element rather than an ordinary pan on a conventional electric range. The electric pan should be thermally insulated and equipped with an "intelligent" controller and timer....... A working prototype of a saucepan, dubbed the EffiCooker, has been constructed according to these guidelines. The EffiCooker has demonstrated energy savings in the range from 28% to 81% compared to conventional equipment when performing ordinary cooking tasks. The user need not be particularly aware...... of energy conservation to realize such savings; even those who are more concerned with their culinary achievements than with energy efficiency are likely to benefit. Besides being energy efficient the EffiCooker is user friendly. Many cooking tasks, once initiated, are performed automatically without any...

  15. Final report: Efficient thyratron modulator project

    International Nuclear Information System (INIS)

    Adler, R.J.; Richter-Sand, R.J.; Gregg, C.W.

    1999-01-01

    The purpose of this program was to examine methods of increasing the efficiency of producing pulses to drive Klystrons in the 150 MW range. This may include 2 Klystrons in the 75 MW range. Specific methods of interest to improve the pulse efficiency were the use of a circuit to add energy to the tail of the pulse, the use of a bipyrimidal transformer, and the use of gas insulation as a means of improving the pulse shape. These methods were investigated using both thyratron and IGBT switching. The low cost designs developed in this work consisted of low voltage designs which don't require the oil immersion. These designs can be ''hot tuned'' based on the use of simple, tunable inductors

  16. High Efficiency Centrifugal Compressor for Rotorcraft Applications

    Science.gov (United States)

    Medic, Gorazd; Sharma, Om P.; Jongwook, Joo; Hardin, Larry W.; McCormick, Duane C.; Cousins, William T.; Lurie, Elizabeth A.; Shabbir, Aamir; Holley, Brian M.; Van Slooten, Paul R.

    2017-01-01

    A centrifugal compressor research effort conducted by United Technologies Research Center under NASA Research Announcement NNC08CB03C is documented. The objectives were to identify key technical barriers to advancing the aerodynamic performance of high-efficiency, high work factor, compact centrifugal compressor aft-stages for turboshaft engines; to acquire measurements needed to overcome the technical barriers and inform future designs; to design, fabricate, and test a new research compressor in which to acquire the requisite flow field data. A new High-Efficiency Centrifugal Compressor stage -- splittered impeller, splittered diffuser, 90 degree bend, and exit guide vanes -- with aerodynamically aggressive performance and configuration (compactness) goals were designed, fabricated, and subquently tested at the NASA Glenn Research Center.

  17. Gendered work conditions, health, and work outcomes.

    Science.gov (United States)

    Bond, Meg A; Punnett, Laura; Pyle, Jean L; Cazeca, Dianne; Cooperman, Manuela

    2004-01-01

    This cross-sectional study of nonfaculty university employees examined associations among gendered work conditions (e.g., sexism and discrimination), job demands, and employee job satisfaction and health. Organizational responsiveness and social support were examined as effect modifiers. Comparisons were made by gender and by the male-female ratio in each job category. The relationship of gendered conditions of work to outcomes differed on the basis of respondents' sex and the job sex ratio. Although the same predictors were hypothesized for job satisfaction, physical health, and psychological distress, there were some differing results. The strongest correlate of job satisfaction was social support; perceived sexism in the workplace also contributed for both men and women. Organizational factors associated with psychological distress differed between female- and male-dominated jobs.

  18. Work, Sickness, Absence, and Identity-Work

    OpenAIRE

    Trude Gjernes

    2013-01-01

    This article explores how a group of industrial workers experience long-term sickness absence and how they cope with this situation. The article presents data from in-depth interviews with male industrial workers employed in a Norwegian factory. The findings suggest that the factory workers handle their failing health by engaging in activities other than wage work. They did not accept a social situation characterized by passivity, social isolation, marginalization, or loss of self. The worker...

  19. Increasing the efficiency of the condensing boiler

    Science.gov (United States)

    Zaytsev, ON; Lapina, EA

    2017-11-01

    Analysis of existing designs of boilers with low power consumption showed that the low efficiency of the latter is due to the fact that they work in most cases when the heating period in the power range is significantly less than the nominal power. At the same time, condensing boilers do not work in the most optimal mode (in condensing mode) in the central part of Russia, a significant part of their total operating time during the heating season. This is due to existing methods of equipment selection and joint operation with heating systems with quantitative control of the coolant. It was also revealed that for the efficient operation of the heating system, it is necessary to reduce the inertia of the heat generating equipment. Theoretical patterns of thermal processes in the furnace during combustion gas at different radiating surfaces location schemes considering the influence of the very furnace configuration, characterized in that to reduce the work condensing boiler in conventional gas boiler operation is necessary to maintain a higher temperature in the furnace (in the part where spiral heat exchangers are disposed), which is possible when redistributing heat flow - increase the proportion of radiant heat from the secondary burner emitter allow Perey For the operation of the condensing boiler in the design (condensation) mode practically the entire heating period.

  20. The Total Energy Efficiency Index for machine tools

    International Nuclear Information System (INIS)

    Schudeleit, Timo; Züst, Simon; Weiss, Lukas; Wegener, Konrad

    2016-01-01

    Energy efficiency in industries is one of the dominating challenges of the 21st century. Since the release of the eco-design directive 2005/32/EC in 2005, great research effort has been spent on the energy efficiency assessment for energy using products. The ISO (International Organization for Standardization) standardization body (ISO/TC 39 WG 12) currently works on the ISO 14955 series in order to enable the assessment of energy efficient design of machine tools. A missing piece for completion of the ISO 14955 series is a metric to quantify the design of machine tools regarding energy efficiency based on the respective assembly of components. The metric needs to take into account each machine tool components' efficiency and the need-oriented utilization in combination with the other components while referring to efficiency limits. However, a state of the art review reveals that none of the existing metrics is feasible to adequately match this goal. This paper presents a metric that matches all these criteria to promote the development of the ISO 14955 series. The applicability of the metric is proven in a practical case study on a turning machine. - Highlights: • Study for pushing forward the standardization work on the ISO 14955 series. • Review of existing energy efficiency indicators regarding three basic strategies to foster sustainability. • Development of a metric comprising the three basic strategies to foster sustainability. • Metric application for quantifying the energy efficiency of a turning machine.