Peace Pilgrim: A Readers Theatre Approach to Peace Education.

Science.gov (United States)

Curran, Joanne M.

Readers theater is a dramatic art that directs attention to the words of a text. During a performance, a reader (rather than an actor) presents and interprets the work within a narrative context intended by the author. In this project, the text, a collection of the words and writings of a woman known as the Peace Pilgrim, tells the story of her…

A Geological and Geophysical Study of the Geothermal Energy Potential of Pilgrim Springs, Alaska

Energy Technology Data Exchange (ETDEWEB)

Turner, Donald L.; Forbes, Robert B. [eds.

1980-01-01

The Pilgrim Springs geothermal area, located about 75 km north of Nome, was the subject of an intensive, reconnaissance-level geophysical and geological study during a 90-day period in the summer of 1979. The thermal springs are located in a northeast-oriented, oval area of thawed ground approximately 1.5 km{sup 2} in size, bordered on the north by the Pilgrim River. A second, much smaller, thermal anomaly was discovered about 3 km northeast of the main thawed area. Continuous permafrost in the surrounding region is on the order of 100 m thick. Present surface thermal spring discharge is {approx} 4.2 x 10{sup -3} m{sup 3} s{sup -1} (67 gallons/minute) of alkali-chloride-type water at a temperature of 81 C. The reason for its high salinity is not yet understood because of conflicting evidence for seawater vs. other possible water sources. Preliminary Na-K-Ca geothermometry suggests deep reservoir temperatures approaching 150 C, but interpretation of these results is difficult because of their dependence on an unknown water mixing history. Based on these estimates, and present surface and drill hole water temperatures, Pilgrim Springs would be classified as an intermediate-temperature, liquid-dominated geothermal system.

Genetic Characterization of the Gut Microbiome of Hajj Pilgrims

KAUST Repository

Beaudoin, Christopher

2018-05-01

Hajj, the annual Islamic pilgrimage to Makkah, Saudi Arabia, is a unique mass gathering event that brings more than 2 million individuals from around the world. Several public health considerations, such as the spread of infectious diseases, must be taken into account with this large temporary influx of people. Gastrointestinal diseases, such as diarrhea, are common at Hajj, yet little is known about the etiology. The human gut microbiome, collection of organisms residing within the intestinal tract, has been under intense study recently, since next generation DNA sequencing technologies allow for extensive surveying of genetic material found in complex biological samples, such as those containing many different organisms. Thus, using 16S rRNA and metagenomic shotgun sequencing, we have characterized the gut microbiome of over 612 pilgrims with and without diarrhea. Several metadata factors, such as hospitalization and different comorbidities, were found to have significant effects on the overall gut microbiome composition. Metagenomic shotgun sequencing efforts revealed the presence of antimicrobial resistance genes originating from disparate regions from around the world. This study provides a snapshot of information concerning the health status of the gut microbiome of Hajj pilgrims and provides more context to the investigation of how to best prepare for mass gathering events.

Recovery Act Validation of Innovative Exploration Techniques Pilgrim Hot Springs, Alaska

Energy Technology Data Exchange (ETDEWEB)

Holdmann, Gwen [Univ. of Alaska, Fairbanks, AK (United States)

2015-04-30

Drilling and temperature logging campaigns between the late 1970's and early 1980’s measured temperatures at Pilgrim Hot Springs in excess of 90°C. Between 2010 and 2014 the University of Alaska used a variety of methods including geophysical surveys, remote sensing techniques, heat budget modeling, and additional drilling to better understand the resource and estimate the available geothermal energy.

Serological study of Bordetella Pertussis, Mycoplasma Pneumonia and Chlamydia Pneumonia in Iranian hajj pilgrims with prolonged cough illnesses: A follow-up study.

Science.gov (United States)

Rahimian, Masoud; HosseiniB, Mahdi

2017-11-01

Hajj pilgrimage is the biggest and longest mass gathering in the Muslim world. Annually, about 50% of more than 2.5 million pilgrims participating in this ritual get involved in severe devastating coughs. Most coughs continue, so the pilgrims turn back home and transmit them to family members and other people. Despite the high prevalence of coughs for many years, what causes them remains unknown. Considering the pertussis-like clinical picture of the so-called "hajj coughs", the researchers conducted a study to measure antibodies against three known common atypical bacteria, namely Bordetella Pertussis, Chlamydia Pneumonia and Mycoplasma Pneumonia. The study was done on three out of eleven groups of pilgrims from Yazd province, central Iran. The sample was selected randomly and consisted of 202 pilgrims who completed an informed consent. Their blood samples were taken, and the plasma was separated and then stored at -70 °C. After turning back from the journey, the pilgrims had their second blood samples taken. As many as 52 pilgrims failed to come for the second sampling, and two samples were broken during transportation. The final analysis was performed on the remaining 148 pairs of samples. Antibodies were already elevated in many pilgrims before the journey probably due to their old age (causing more exposure to pathogens) or unplanned pertussis vaccination. After their return, antibody elevation was only mild, again probably due to the old age of the participants (i.e. due to their weaker immune systems). Some antibodies even fell down without any known reason. In this study, previous hajj journey was assumed as a prophylactic factor, due to acquisition of immunity. Coughs with a prolonged pertussis-like picture were also presumed to be more related than other types of coughs to atypical pathogens. Statistical tests showed that the history of previous journeys had no prophylactic effect. Also, no correlation was found between the clinical pictures of coughs

Pattern of cardiovascular diseases in pilgrims admitted in Al-Noor hospital Makkah during hajj 1429 H

International Nuclear Information System (INIS)

Serafi, A.S.

2010-01-01

The number of Hajj pilgrims is increasing every year, and has crossed the huge figure of 2 million. During Hajj period of 1428H (2007G), cardiac problems have been reported as one of the commonest causes of admissions in hospitals. However, the data regarding their Nationalities, age and gender is not available in the literature. This study was carried out to identify the cardiovascular diseases in Hajj pilgrims for the year 1429 H (2008G) classified on geographical, age and gender basis, and to suggest pre-Hajj measures for their home countries and their handling by concerned Ministry during Hajj. Methods: On retrospective basis, data of all patients belonging to different Nationalities of various regions of the world, their age and gender, was analysed, who were admitted in the Coronary Care Unit (CCU) and cardiology wards at Al- Noor Specialist Hospital Makkah, over a period of 15 days in Hajj season 1429H (2008G). Results: Out of 203 patients hospitalised, the majority (94%) were older, i.e., >45 years. The patients suffering from various cardiac diseases were in the following order: heart failure cases 67%; ischemic heart disease 21.7%; and valvular heart disease 11.3%. As an outcome of total admissions (hospitalisation), 84% patients were discharged in stable condition, 9% were discharged against medical advice, 4.5% were unable to perform Hajj and 2.5% patients died. Most common cardiac diseases were found in hospitalized patients for Hajj 1429 H, which belongs to different countries over the globe. It indicate loop holes in the health services of their home countries not verifying the physical fitness of their pilgrims before allowing them to proceed for Hajj. This study will also serve as a helping tool for the Ministry of Hajj in Saudi Arabia to take appropriate measures for demanding strictness for the physical fitness of Hajj pilgrims and anticipated health services for them. (author)

Geophysical investigations of the geologic and hydrothermal framework of the Pilgrim Springs Geothermal Area, Alaska

Science.gov (United States)

Glen, Jonathan; McPhee, Darcy K.; Bedrosian, Paul A.

2014-01-01

Pilgrim Hot Springs, located on the Seward Peninsula in west-central Alaska, is characterized by hot springs, surrounding thawed regions, and elevated lake temperatures. The area is of interest because of its potential for providing renewable energy for Nome and nearby rural communities. We performed ground and airborne geophysical investigations of the Pilgrim Springs geothermal area to identify areas indicative of high heat flow and saline geothermal fluids, and to map key structures controlling hydrothermal fluid flow. Studies included ground gravity and magnetic measurements, as well as an airborne magnetic and frequency-domain electromagnetic (EM) survey. The structural and conceptual framework developed from this study provides critical information for future development of this resource and is relevant more generally to our understanding of geothermal systems in active extensional basins. Potential field data reveal the Pilgrim area displays a complex geophysical fabric reflecting a network of intersecting fault and fracture sets ranging from inherited basement structures to Tertiary faults. Resistivity models derived from the airborne EM data reveal resistivity anomalies in the upper 100 m of the subsurface that suggest elevated temperatures and the presence of saline fluids. A northwest trending fabric across the northeastern portion of the survey area parallels structures to the east that may be related to accommodation between the two major mountain ranges south (Kigluaik) and east (Bendeleben) of Pilgrim Springs. The area from the springs southward to the range front, however, is characterized by east-west trending, range-front-parallel anomalies likely caused by late Cenozoic structures associated with north-south extension that formed the basin. The area around the springs (~10 km2 ) is coincident with a circular magnetic high punctuated by several east-west trending magnetic lows, the most prominent occurring directly over the springs. These features

Pilgrimage and Pilgrim Hierarchies in Vernacular Discourse: Comparative Notes from the Camino de Santiago and Glastonbury

Directory of Open Access Journals (Sweden)

Tiina Sepp

2014-06-01

Full Text Available 0 false 18 pt 18 pt 0 0 false false false This article is based on my fieldwork conducted in two important destinations in the spiritual landscape of European vernacular religion – the Camino de Santiago (pilgrimage route to Santiago de Compostela in northern Spain, and Glastonbury in southwest England. In this comparison between modern expressions of pilgrimage, I look into the power relationships that exist on the pilgrimage, describe how hierarchies of pilgrims are created and maintained, and reflect on the meaning of the words pilgrim and pilgrimage. The co-existence of the different belief systems of Christianity and New Age and the conflicts and tension between them will be explored. I will also examine discourse around competing male and female energies. 

Consensus recommendation for India and Bangladesh for the use of pneumococcal vaccine in mass gatherings with special reference to Hajj pilgrims

Directory of Open Access Journals (Sweden)

Dilip Mathai

2016-01-01

Full Text Available Respiratory tract infections are prevalent among Hajj pilgrims with pneumonia being a leading cause of hospitalization. Streptococcus pneumoniae is a common pathogen isolated from patients with pneumonia and respiratory tract infections during Hajj. There is a significant burden of pneumococcal disease in India, which can be prevented. Guidelines for preventive measures and adult immunization have been published in India, but the implementation of the guidelines is low. Data from Bangladesh are available about significant mortality due to respiratory infections; however, literature regarding guidelines for adult immunization is limited. There is a need for extensive awareness programs across India and Bangladesh. Hence, there was a general consensus about the necessity for a rapid and urgent implementation of measures to prevent respiratory infections in pilgrims traveling to Hajj. About ten countries have developed recommendations for pneumococcal vaccination in Hajj pilgrims: France, the USA, Kuwait, Qatar, Bahrain, the UAE (Dubai Health Authority, Singapore, Malaysia, Egypt, and Indonesia. At any given point whether it is Hajj or Umrah, more than a million people are present in the holy places of Mecca and Madina. Therefore, the preventive measures taken for Hajj apply for Umrah as well. This document puts forward the consensus recommendations by a group of twenty doctors following a closed-door discussion based on the scientific evidence available for India and Bangladesh regarding the prevention of respiratory tract infections in Hajj pilgrims.

Prevalence of MERS-CoV nasal carriage and compliance with the Saudi health recommendations among pilgrims attending the 2013 Hajj.

Science.gov (United States)

Memish, Ziad A; Assiri, Abdullah; Almasri, Malak; Alhakeem, Rafat F; Turkestani, Abdulhafeez; Al Rabeeah, Abdullah A; Al-Tawfiq, Jaffar A; Alzahrani, Abdullah; Azhar, Essam; Makhdoom, Hatem Q; Hajomar, Waleed H; Al-Shangiti, Ali M; Yezli, Saber

2014-10-01

Annually, Saudi Arabia is the host of the Hajj mass gathering. We aimed to determine the Middle East respiratory syndrome coronavirus (MERS-CoV) nasal carriage rate among pilgrims performing the 2013 Hajj and to describe the compliance with the Saudi Ministry of Health vaccine recommendations. Nasopharyngeal samples were collected from 5235 adult pilgrims from 22 countries and screened for MERS-CoV using reverse transcriptase-polymerase chain reaction. Information regarding the participants' age, gender, country of origin, medical conditions, and vaccination history were obtained. The mean age of the screened population was 51.8 years (range, 18-93 years) with a male/female ratio of 1.17:1. MERS-CoV was not detected in any of the samples tested (3210 pre-Hajj and 2025 post-Hajj screening). According to the vaccination documents, all participants had received meningococcal vaccination and the majority of those from at-risk countries were vaccinated against yellow fever and polio. Only 22% of the pilgrims (17.5% of those ≥65 years and 36.3% of diabetics) had flu vaccination, and 4.4% had pneumococcal vaccination. There was no evidence of MERS-CoV nasal carriage among Hajj pilgrims. While rates of compulsory vaccinations uptake were high, uptake of pneumococcal and flu seasonal vaccinations were low, including among the high-risk population. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

STUDI KELAYAKAN MAKAM KERAMAT AGUNG PEMECUTAN SEBAGAI DAYA TARIK WISATA PILGRIM DI DENPASAR (ANALISIS ASPEK PASAR DAN PEMASARAN

Directory of Open Access Journals (Sweden)

Ashmi Hudaningsih

2014-06-01

Full Text Available Makam Keramat Agung Pemecutan is one of the pilgrim tourism potentials in Denpasar. To avoid stagnant or decline position of Makam Keramat Agung Pemecutan development as a pilgrim tourist attraction, it is necessary to do a feasibility study. The most important and first aspect in feasibility study is market and marketing aspects.This study aims to determine the feasibility of market and marketing aspects of Makam Keramat Agung Pemecutan wich views from the market potential and the position of Makam Keramat Agung Pemecutan compared with its competitors, and make the right marketing strategy for Makam Keramat Agung Pemecutan in its development into a pilgrim tourist attraction. The results of this study shows that potential market of Makam Keramat Agung Pemecutan is domestic tourists who are Muslims. From the analysis of the competitive profile matrix shows Makam Keramat Agung Pemecutans position more competitive than its competitors. Therefore, Makam Keramat Agung Pemecutan is feasible on the market and marketing aspects. The suggestions provided are should establish management organization, make promotional activities, add facilities, and maintaining product quality of Makam Keramat Agung Pemecutan, continue this research about feasibility of Makam Keramat Agung Pemecutan in the other aspects especially culture aspect.

Pilgrim Souvenir: Hood of Cherries

Directory of Open Access Journals (Sweden)

Amy Jeffs

2017-06-01

Full Text Available This lead alloy badge from the British Museum represents a medieval hood repurposed as a sack for a harvest of cherries. It measures 38 by 30 millimetres and was cast integrally with its pin and clasp in a three-part mould. When first made, it would have shone like silver. Badges were purchased in their millions by pilgrims between the late twelfth and early sixteenth centuries, as attractive, wearable and cheap souvenirs of their visits to holy sites. By the later Middle Ages badges were also worn as general symbols of devotion, as livery insignia, and as humorous or amorous tokens; which of these categories the “hood of cherries” badge falls into is debatable. Five of them have been found: three in Salisbury, and another in London, while the provenance of the fifth is unknown. Their cataloguers reluctantly associate them with the cult of St Dorothy, whose emblem is a basket of fruit, although Spencer expressed concern that, “a fashionable hood seems far removed from her story.” There are also possible alternative explanations to its meaning, which will be explored here.

«O Sancta Haera». Pilgrims and Pilgrimage in the Sanctuary of Sainte Foy at Conques

Directory of Open Access Journals (Sweden)

Marco Papasidero

2017-12-01

Full Text Available The Liber miraculorum Sancte Fidis, written during the XI century, partially by Bernard of Angers, describes miracles, healings and rituals practiced in the sanctuary of Sainte Foy at Conques, martyr of the beginning of the IV century.The Liber allows us to analyze the anthropological and religious dimension of the pilgrims and their pilgrimage. As a matter of fact, through the descriptions of the pilgrims, their gestures, their aspects, their words, their ritual practices by the tomb, their rich or poor offerings, we can analyze the dimension of the Medieval pilgrimage as a specific case study, which can help us describe the idea of pilgrimage in Medieval West Europe and specifically in this sanctuary.Furthermore, through the reading of the accounts of miracle stories, we can analyze the healing ritual practices, the miraculous dimension of this cult and the Sainte’s ability to treat diseases. The center of the Conques cult was – and remains – the Majesty of Sainte Foy, a reliquary statue in which the power (virtus/dynamis of the saint’s relics is concentrated.

Case study: Massachusetts Department of Public Health's Southeastern Massachusetts health study on leukemia around Pilgrim Nuclear Power Station: Who won?

Energy Technology Data Exchange (ETDEWEB)

Flanagan, Anita [Boston Edison Company (United States)

1993-07-01

In October 1990, the Massachusetts Department of Public Health released their Southeastern Massachusetts health study. This is a study of leukemia incidence in 22 towns around Pilgrim NPP, for the period 1978 through 1986. Pilgrim Station had been returned to operation following a 3 year outage, from 1986-1989. During this period, some $300 million in capital outlay was invested by Boston Edison in upgrading safety systems and installing the so-Called Three Mile Island upgrades. A copy of the peer review panel report is attached to this paper. Because of the interest in the Southeastern Massachusetts Health Study in Europe. There are three major points the Panel made which can summarized: 1. No excess of leukemia was found around Pilgrim Station. 2. The Southeastern Massachusetts Health Study over-predicted by a factor of 90 the number of leukemia cases attributable to plant operation. 3. The Southeastern Massachusetts Health Study failed to account for exposure to natural background radiation, which represents far larger biological exposure than plant Operation. Given All Of This, One Might Ask Why Didn't Common Sense Prevail In The Beginning? One Answer Might Be The Energy Of The Media In Pursuing The Story And Playing It Up No Matter What. Another Answer Might Be That The Original Study Purported To Show 'What Everyone Knows'. No One Really Stopped To Question Whether The Study Was Politically Motivated, Given That The Division of Environmental Health's Budget Had Been Cut.

Case study: Massachusetts Department of Public Health's Southeastern Massachusetts health study on leukemia around Pilgrim Nuclear Power Station: Who won?

International Nuclear Information System (INIS)

Flanagan, Anita

1993-01-01

In October 1990, the Massachusetts Department of Public Health released their Southeastern Massachusetts health study. This is a study of leukemia incidence in 22 towns around Pilgrim NPP, for the period 1978 through 1986. Pilgrim Station had been returned to operation following a 3 year outage, from 1986-1989. During this period, some $300 million in capital outlay was invested by Boston Edison in upgrading safety systems and installing the so-Called Three Mile Island upgrades. A copy of the peer review panel report is attached to this paper. Because of the interest in the Southeastern Massachusetts Health Study in Europe. There are three major points the Panel made which can summarized: 1. No excess of leukemia was found around Pilgrim Station. 2. The Southeastern Massachusetts Health Study over-predicted by a factor of 90 the number of leukemia cases attributable to plant operation. 3. The Southeastern Massachusetts Health Study failed to account for exposure to natural background radiation, which represents far larger biological exposure than plant Operation. Given All Of This, One Might Ask Why Didn't Common Sense Prevail In The Beginning? One Answer Might Be The Energy Of The Media In Pursuing The Story And Playing It Up No Matter What. Another Answer Might Be That The Original Study Purported To Show 'What Everyone Knows'. No One Really Stopped To Question Whether The Study Was Politically Motivated, Given That The Division of Environmental Health's Budget Had Been Cut

Catering for Pilgrims: Petrographic Analysis of Late Antique Kitchenware from the Monastery of St Lot at Deir 'Ain 'Abata, Jordan

Directory of Open Access Journals (Sweden)

Louise Joyner

2000-10-01

Full Text Available Petrography has been used to elucidate patterns of production and consumption of kitchenware at a typical Early Christian desert monastery on the Pilgrim route. While some vessels may have been produced locally, there is evidence for long distance trade of other vessels.

Psychometric Properties of the Persian Version of the God Locus of Health Control (GLHC): A Study on Muslim Pilgrims.

Science.gov (United States)

Nabipour, Amir Reza; Nakhaee, Nouzar; Khanjani, Narges; Soltani, Maryam; Moradlou, Hossein Zirak; Soltani, Zahrasadat

2018-02-01

God Locus of Health Control (GHLC) scale is an instrument for assessing to what extent one believes that God controls his/her health or disease. The aim of this study was to describe the cultural adaptation of this scale and to investigate the psychometric properties of Persian version. At first, the scale was forward-translated to Persian, and then, backward-translation was conducted. Finally, the synthesized back-translated version was prepared and compared to the draft Persian-language version of the GLHC. In the next step, in order to test cognitive debriefing, the Persian-language version of the questionnaire was completed by 20 pilgrims. Final version of Persian GHLC scale was answered by 600 pilgrims attending religious holy places. Mean age of respondents was 33.15 (±11.04) years. There was a positive correlation between six items of GLHC scale and inter-item correlation coefficients. The Cronbach's alpha coefficient was 0.84. Exploratory factor analysis showed that the G LHC scale had a one-factor structure. The factor loadings for all items ranged from 0.57 to 0.77. Residual correlations of all items were between -0.2 and +0.2. The people with lower income had significantly higher score of GLHC scale. GLHC scale score had a significant positive correlation with DUREL subscale and MHLC Chance Externality subscale score. There was no a significant correlation between GLHC scale score and Multidimensional Health Locus of Control (MHLC) Internality and Powerful subscales scores. The results of the present study showed that the Persian version of GHLC scale has acceptable factorial validity and internal consistency reliability.

Morbidity and mortality amongst Indian Hajj pilgrims: A 3-year experience of Indian Hajj medical mission in mass-gathering medicine

Directory of Open Access Journals (Sweden)

Inam D. Khan

2018-03-01

Full Text Available The Hajj, a mass-gathering of over 3.5-million pilgrims, faces challenges to global health-security, housing, food, water, transportation, communication, sanitation, crowd-control and security. The Indian Medical Mission extended health-security to approximately 140,000 pilgrims, through outreach medical teams, primary-care clinics, tent-clinics, secondary-care hospitals and evacuation capabilities. Data on medical attendance, bed-occupancy, investigations, referrals, medication usage and deaths was compared. Outpatient attendance was 374,475 in static-clinics, 5135 in tent-clinics and 13,473 through task-forces. 585 (62.90% in-patients were hospitalized amongst 930 secondary-care referrals. Secondary-care bed-days were 2106 with average bed-occupancy being 77.78%. 495 patients were institutionalized in tertiary-care Saudi-Arabian hospitals. Infectious diseases were most commonly (53.26% encountered due to overwhelming respiratory-infections, followed by trauma (24.40%. Analgesics (66.38/100 patients and antibacterials (48.34/100 patients were frequently prescribed. Crude mortality amongst Indian pilgrims was 11.99/10,000. Risk-factors associated with high morbidity were old-age and pre-existing comorbidities. Overwhelming surge of patients facilitates transmission of communicable infections and leads to stress induced physical, mental and compassion fatigue amongst healthcare personnel. Respiratory infections are highly prevalent and easily transmissible during Hajj leading to significant morbidity, increased burden to existing health facilities, overwhelming costs on health systems and globalization of multiresistant pathogens. Diabetic patients should avoid heat exposure and use protective footwear during Hajj rituals. Mass-gathering medicine at Hajj can be optimized by improving patient knowledge on performing Hajj at a younger age, medicine compliance, avoiding self-medication, self-monitoring of hypertension, blood glucose, and preventive

Morbidity and mortality amongst Indian Hajj pilgrims: A 3-year experience of Indian Hajj medical mission in mass-gathering medicine.

Science.gov (United States)

Khan, Inam D; Khan, Shahbaz A; Asima, Bushra; Hussaini, Syed B; Zakiuddin, M; Faisal, F A

The Hajj, a mass-gathering of over 3.5-million pilgrims, faces challenges to global health-security, housing, food, water, transportation, communication, sanitation, crowd-control and security. The Indian Medical Mission extended health-security to approximately 140,000 pilgrims, through outreach medical teams, primary-care clinics, tent-clinics, secondary-care hospitals and evacuation capabilities. Data on medical attendance, bed-occupancy, investigations, referrals, medication usage and deaths was compared. Outpatient attendance was 374,475 in static-clinics, 5135 in tent-clinics and 13,473 through task-forces. 585 (62.90%) in-patients were hospitalized amongst 930 secondary-care referrals. Secondary-care bed-days were 2106 with average bed-occupancy being 77.78%. 495 patients were institutionalized in tertiary-care Saudi-Arabian hospitals. Infectious diseases were most commonly (53.26%) encountered due to overwhelming respiratory-infections, followed by trauma (24.40%). Analgesics (66.38/100 patients) and antibacterials (48.34/100 patients) were frequently prescribed. Crude mortality amongst Indian pilgrims was 11.99/10,000. Risk-factors associated with high morbidity were old-age and pre-existing comorbidities. Overwhelming surge of patients facilitates transmission of communicable infections and leads to stress induced physical, mental and compassion fatigue amongst healthcare personnel. Respiratory infections are highly prevalent and easily transmissible during Hajj leading to significant morbidity, increased burden to existing health facilities, overwhelming costs on health systems and globalization of multiresistant pathogens. Diabetic patients should avoid heat exposure and use protective footwear during Hajj rituals. Mass-gathering medicine at Hajj can be optimized by improving patient knowledge on performing Hajj at a younger age, medicine compliance, avoiding self-medication, self-monitoring of hypertension, blood glucose, and preventive health measures

Camønoen: A pilgrim trail conceived along a communitarian business model

DEFF Research Database (Denmark)

Meged, Jane Widtfeldt; Gyimóthy, Szilvia

2017-01-01

This paper presents an alternative experiment of building an operative communitarian business model to leverage tourism in Southern Denmark. Coastal communities in Denmark have experienced a steady socioeconomic decline, which has further been aggravated by a stagnating tourism and agricultural...... sector. Within this context, coastal regions are attempting to harness the potentials of the emerging collaborative economy by experimenting with communitarian business models. Such is the case of a digitally facilitated pilgrim trail in Denmark, the Camøno, which was conceived in 2016 to mobilize sparse...... and loosely connected local resources to create value for tourists and citizens. The trail sustains over 200 small local actors and attracted over 75.000 visitors after less than a year of operation. Our paper explores the rapid success and consolidation of the Camøno trail by analyzing the performativity...

Pilgrims sailing the Titanic: plausibility effects on memory for misinformation.

Science.gov (United States)

Hinze, Scott R; Slaten, Daniel G; Horton, William S; Jenkins, Ryan; Rapp, David N

2014-02-01

People rely on information they read even when it is inaccurate (Marsh, Meade, & Roediger, Journal of Memory and Language 49:519-536, 2003), but how ubiquitous is this phenomenon? In two experiments, we investigated whether this tendency to encode and rely on inaccuracies from text might be influenced by the plausibility of misinformation. In Experiment 1, we presented stories containing inaccurate plausible statements (e.g., "The Pilgrims' ship was the Godspeed"), inaccurate implausible statements (e.g., . . . the Titanic), or accurate statements (e.g., . . . the Mayflower). On a subsequent test of general knowledge, participants relied significantly less on implausible than on plausible inaccuracies from the texts but continued to rely on accurate information. In Experiment 2, we replicated these results with the addition of a think-aloud procedure to elicit information about readers' noticing and evaluative processes for plausible and implausible misinformation. Participants indicated more skepticism and less acceptance of implausible than of plausible inaccuracies. In contrast, they often failed to notice, completely ignored, and at times even explicitly accepted the misinformation provided by plausible lures. These results offer insight into the conditions under which reliance on inaccurate information occurs and suggest potential mechanisms that may underlie reported misinformation effects.

Technical evaluation report on the monitoring of electric power to the reactor-protection system for the Pilgrim Nuclear Power Station

International Nuclear Information System (INIS)

Selan, J.C.

1982-01-01

This report documents the technical evaluation of the monitoring of electric power to the reactor protection system (RPS) at the Pilgrim Nuclear Power Station. The evaluation is to determine if the proposed design modification will protect the RPS from abnormal voltage and frequency conditions which could be supplied from the power supplies and will meet certain requirements set forth by the Nuclear Regulatory Commission. The proposed design modifications will protect the RPS from sustained abnormal voltage and frequency conditions from the supplying sources

STRATEGI PEMASARAN PAKET WISATA PILGRIM PT. DONGAN SAHUTA TOUR AND TRAVEL DI BALI

Directory of Open Access Journals (Sweden)

Paradita Putri Amelia

2017-04-01

Full Text Available This study aimed to determine the marketing activities of pilgrim package tour that have been performed by PT. Dongan Sahuta Tour and Travel, develop strategies and also marketing programs that can be implemented by the company. Data collection by observation, interviews, questionnaires and literature study. The sampling technique used purposive sampling. Data were analyzed using qualitative descriptive analysis, analysis of the Likert scale and SWOT analysis approach. The results obtained there are four teen indicators of strengths, weaknesses of tree indicators, four indicators of opportunities and four indicators threats. Marketing strategies that can be implemented by the firm such as 1create and develop a quality product, 2provide rebates to customers who have used the services of PT. Dongan Sahuta Tour and Travel several times.The advice given are more active in the promotion by giving rebates, conduct marketing activities as E-commers, expand cooperation with business trips or individuals.

Hyperspatial Thermal Imaging of Surface Hydrothermal Features at Pilgrim Hot Springs, Alaska using a small Unmanned Aerial System (sUAS)

Science.gov (United States)

Haselwimmer, C. E.; Wilson, R.; Upton, C.; Prakash, A.; Holdmann, G.; Walker, G.

2013-12-01

Thermal remote sensing provides a valuable tool for mapping and monitoring surface hydrothermal features associated with geothermal activity. The increasing availability of low-cost, small Unmanned Aerial Systems (sUAS) with integrated thermal imaging sensors offers a means to undertake very high spatial resolution (hyperspatial), quantitative thermal remote sensing of surface geothermal features in support of exploration and long-term monitoring efforts. Results from the deployment of a quadcopter sUAS equipped with a thermal camera over Pilgrim Hot Springs, Alaska for detailed mapping and heat flux estimation for hot springs, seeps, and thermal pools are presented. Hyperspatial thermal infrared imagery (4 cm pixels) was acquired over Pilgrim Hot Springs in July 2013 using a FLIR TAU 640 camera operating from an Aeryon Scout sUAS flying at an altitude of 40m. The registered and mosaicked thermal imagery is calibrated to surface temperature values using in-situ measurements of uniform blackbody tarps and the temperatures of geothermal and other surface pools acquired with a series of water temperature loggers. Interpretation of the pre-processed thermal imagery enables the delineation of hot springs, the extents of thermal pools, and the flow and mixing of individual geothermal outflow plumes with an unprecedented level of detail. Using the surface temperatures of thermal waters derived from the FLIR data and measured in-situ meteorological parameters the hot spring heat flux and outflow rate is calculated using a heat budget model for a subset of the thermal drainage. The heat flux/outflow rate estimates derived from the FLIR data are compared against in-situ measurements of the hot spring outflow rate recorded at the time of the thermal survey.

Transformer Efficiency Assessment - Okinawa, Japan

Energy Technology Data Exchange (ETDEWEB)

Thomas L. Baldwin; Robert J. Turk; Kurt S. Myers; Jake P. Gentle; Jason W. Bush

2012-08-01

The US Army Engineering & Support Center, Huntsville (USAESCH), and the US Marine Corps Base (MCB), Okinawa, Japan retained Idaho National Laboratory (INL) to conduct a Transformer Efficiency Assessment of “key” transformers located at multiple military bases in Okinawa, Japan. The purpose of this assessment is to support the Marine Corps Base, Okinawa in evaluating medium voltage distribution transformers for potential efficiency upgrades. The original scope of work included the MCB providing actual transformer nameplate data, manufacturer’s factory test sheets, electrical system data (kWh), demand data (kWd), power factor data, and electricity cost data. Unfortunately, the MCB’s actual data is not available and therefore making it necessary to de-scope the original assessment. Note: Any similar nameplate data, photos of similar transformer nameplates, and basic electrical details from one-line drawings (provided by MCB) are not a replacement for actual load loss test data. It is recommended that load measurements are performed on the high and low sides of transformers to better quantify actual load losses, demand data, and power factor data. We also recommend that actual data, when available, be inserted by MCB Okinawa where assumptions have been made and then the LCC analysis updated. This report covers a generalized assessment of modern U.S. transformers in a three level efficiency category, Low-Level efficiency, Medium-Level efficiency, and High-Level efficiency.

Transformer Efficiency Assessment - Okinawa, Japan

Energy Technology Data Exchange (ETDEWEB)

Thomas L. Baldwin; Robert J. Turk; Kurt S. Myers; Jake P. Gentle; Jason W. Bush

2012-05-01

The US Army Engineering & Support Center, Huntsville (USAESCH), and the US Marine Corps Base (MCB), Okinawa, Japan retained Idaho National Laboratory (INL) to conduct a Transformer Efficiency Assessment of “key” transformers located at multiple military bases in Okinawa, Japan. The purpose of this assessment is to support the Marine Corps Base, Okinawa in evaluating medium voltage distribution transformers for potential efficiency upgrades. The original scope of work included the MCB providing actual transformer nameplate data, manufacturer’s factory test sheets, electrical system data (kWh), demand data (kWd), power factor data, and electricity cost data. Unfortunately, the MCB’s actual data is not available and therefore making it necessary to de-scope the original assessment. Note: Any similar nameplate data, photos of similar transformer nameplates, and basic electrical details from one-line drawings (provided by MCB) are not a replacement for actual load loss test data. It is recommended that load measurements are performed on the high and low sides of transformers to better quantify actual load losses, demand data, and power factor data. We also recommend that actual data, when available, be inserted by MCB Okinawa where assumptions have been made and then the LCC analysis updated. This report covers a generalized assessment of modern U.S. transformers in a three level efficiency category, Low-Level efficiency, Medium-Level efficiency, and High-Level efficiency.

Technical evaluation of the proposed design modifications and technical specification changes on grid voltage degradation (Part A) for the Pilgrim Nuclear Power Station, Unit 1

International Nuclear Information System (INIS)

White, R.L.

1980-01-01

This report documents the technical evaluation of the proposed design modifications and Technical Specification changes for protection of Class 1E equipment from grid voltage degradation for the Pilgrim Nuclear Power Station. The review criteria are based on several IEEE standards and the Code of Federal Regulations. The evaluation compares the submittals made by the licensee with the NRC staff positions and the review criteria and presents the reviewer's conclusion on the acceptability of the proposed system

The paths of salvation and eternal condemnation: The presence of the allegory in the History of the Elected Pilgrim and his Brother Precito (1682, de Alexandre de Gusmão

Directory of Open Access Journals (Sweden)

José Adriano Filho

2015-04-01

Full Text Available The repercussions of the echoes of the Council of Trent (1546-1563, the Counter Reform movement, and the repercussions they had on the artistic production in the Catholic world. The pedagogical-didactic intents behind its composition are grounded on the belief that art could be an effective tool for reconverting of the faithful and for indoctrination in the values of the Catholic faith. Considering that, this paper aims at presenting the way allegory became an important tool for the interpretation and construction of religious discourse, as we can see in the History of the Elected Pilgrim and his Brother Precito. The book is an allegorical narrative that presents the history of two pilgrim brothers born in Egypt from where they set out with the intention of making a fortune (one brother goes to Jerusalem, and the  other one goes to Babylon. In this way, the book presents continuity with the medieval pattern that highlights the journey, especially the path for salvation. The readiness of allegory to transmit abstract concepts through concrete visualizations allied to a form of indirect expression made it a powerful, didactic, apologetic, and entertaining tool for that time.

Waste to biodiesel: A preliminary assessment for Saudi Arabia.

Science.gov (United States)

Rehan, M; Gardy, J; Demirbas, A; Rashid, U; Budzianowski, W M; Pant, Deepak; Nizami, A S

2018-02-01

This study presents a preliminary assessment of biodiesel production from waste sources available in the Kingdom of Saudi Arabia (KSA) for energy generation and solution for waste disposal issues. A case study was developed under three different scenarios: (S1) KSA population only in 2017, (S2) KSA population and pilgrims in 2017, and (S3) KSA population and pilgrims by 2030 using the fat fraction of the municipal solid waste. It was estimated that S1, S2, and S3 scenarios could produce around 1.08, 1.10 and 1.41 million tons of biodiesel with the energy potential of 43423, 43949 and 56493 TJ respectively. Furthermore, annual savings of US $55.89, 56.56 and 72.71 million can be generated from landfill diversion of food waste and added to the country's economy. However, there are challenges in commercialization of waste to biodiesel facilities in KSA, including waste collection and separation, impurities, reactor design and biodiesel quality. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influenza not MERS CoV among returning Hajj and Umrah pilgrims with respiratory illness, Kashmir, north India, 2014-15.

Science.gov (United States)

Koul, Parvaiz A; Mir, Hyder; Saha, Siddhartha; Chadha, Mandeep S; Potdar, Varsha; Widdowson, Marc-Alain; Lal, Renu B; Krishnan, Anand

The increasing reports of Middle East Respiratory Syndrome (MERS) caused by MERS coronavirus (MERS-CoV) from many countries emphasize its importance for international travel. Muslim pilgrimages of Hajj and Umrah involve mass gatherings of international travellers. We set out to assess the presence of influenza and MERS-CoV in Hajj/Umrah returnees with acute respiratory infection. . Disembarking passengers (n = 8753) from Saudi Arabia (October 2014 to April 2015) were interviewed for the presence of respiratory symptoms; 977 (11%) reported symptoms and 300 (age 26-90, median 60 years; 140 male) consented to participate in the study. After recording clinical and demographic data, twin swabs (nasopharyngeal and throat) were collected from each participant, pooled in viral transport media and tested by real-time RT PCR for MERS-CoV and influenza A and B viruses and their subtypes. The participants had symptoms of 1-15 days (median 5d); cough (90%) and nasal discharge (86%) being the commonest. None of the 300 participants tested positive for MERS-CoV; however, 33 (11%) tested positive for influenza viruses (A/H3N2 = 13, A/H1N1pdm09 = 9 and B/Yamagata = 11). Eighteen patients received oseltamivir. No hospitalizations were needed and all had uneventful recovery. Despite a high prevalence of acute respiratory symptoms, MERS coV was not seen in returning pilgrims from Hajj and Umrah. However detection of flu emphasises preventive strategies like vaccination. Copyright © 2016 Elsevier Ltd. All rights reserved.

Stochastic assessment of investment efficiency in a power system

International Nuclear Information System (INIS)

Davidov, Sreten; Pantoš, Miloš

2017-01-01

The assessment of investment efficiency plays a critical role in investment prioritization in the context of electrical network expansion planning. Hence, this paper proposes new criteria for the cost-efficiency investment applied in the investment ranking process in electrical network planning, based on the assessment of the new investment candidates impact on active-power losses, bus voltages and line loadings in the network. These three general criteria are chosen due to their strong economic influence when the active-power losses and line loadings are considered and due to their significant impact on quality of supply allowed for the voltage profile. Electrical network reliability of supply is not addressed, since, this criterion has already been extensively applied in other solutions regarding investment efficiency assessment. The proposed ranking procedure involves a stochastic approach applying the Monte Carlo method in the scenario preparation. The number of scenarios is further reduced by the K-MEANS procedure in order to speed up the investment efficiency assessment. The proposed ranking procedure is tested using the standard New England test system. The results show that based on the newly involved investment assessment criteria indices, system operators will obtain a prioritized list of investments that will prevent excessive and economically wasteful spending. - Highlights: • Active-Power Loss Investment Efficiency Index LEI. • Voltage Profile Investment Efficiency Index VEI. • Active-Power Flow Loading Mitigation Investment Efficiency Index PEI. • Optimization model for network expansion planning with new indices.

Characteristics of the assistance to pilgrims in the National Sanctuary of Our Lady of Aparecida, São Paulo, Brazil, 2011-2014.

Science.gov (United States)

Carmo, Hercules de Oliveira; Valente, Tânia Cristina Oliveira

2017-01-01

to describe the characteristics of the health assistance for pilgrims visiting the National Sanctuary of Our Lady of Aparecida and to investigate health care strategies in periods of peak of religious tourism. a descriptive study using outpatient medical records from 2011 to 2014, for a detailed analysis for the month of October 2014 and the operational documents for health care in periods of mass events in the medical clinic of the Sanctuary. 95,011 people were assisted in the period, 2,266 in October 2014; the higher demand for assistance was from elderly individuals (33%), women (59%), and people from the Brazilian Southeast region (79%); there were no operational documents for specific actions for this period. the large number of visitors, associated with the frequency of mass events and the absence of an operating plan, may pose a serious public health scenario for that region.

Eco-efficiency assessment of dairy wastewater reuse

DEFF Research Database (Denmark)

Rygaard, Martin; Skrydstrup, Julie; Larsen, Sille Lyster

. To evaluate the eco-efficiency of new technologies we have developed a method that aligns assessment of environmental impacts and value creation within a life-cycle boundary of a food processing industry. Using standard life-cycle assessment and the concept of value added we have demonstrated the method......, but it comes at the cost of decreased value creation when considering the entire value chain. The applied eco-efficiency method showed the benefits and drawbacks of implementing a new technology for all involved stakeholders and the concept of value added resonates well with the commercial actors involved...... supply and wastewater management can limit the production capacity of an industrial facility, when local water resources are under stress or wastewater treatment capacity is limited. In such situations, the industry will seek to increase its water efficiency through implementation of new technology...

Active screening and surveillance in the United Kingdom for Middle East respiratory syndrome coronavirus in returning travellers and pilgrims from the Middle East: a prospective descriptive study for the period 2013–2015

Directory of Open Access Journals (Sweden)

Sowsan F. Atabani

2016-06-01

Conclusions: Respiratory tract infections in travellers/pilgrims returning to the UK from the Middle East are mainly due to rhinoviruses, influenza A, and influenza B. Whilst MERS-CoV was not detected in the 202 patients studied, heightened awareness of the possibility of MERS-CoV and continuous proactive surveillance are essential to rapidly identify cases of MERS-CoV and other seasonal respiratory tract viruses such as avian influenza, in patients presenting to hospital. Early identification and isolation may prevent outbreaks in nosocomial settings.

ASSESSMENT OF EFFICIENCY OF APPLICATION OF A NEW BUILDING MATERIAL

Directory of Open Access Journals (Sweden)

Gumba Huta Msuratovich

2012-10-01

Full Text Available Methodical approaches and procedures of implementation of official provisions of Methodical Recommendations are considered in article. Upon completion of analysis of a number of factors, the authors suggest using the option of assessment of efficiency of application of a new construction material through the application of Methodical Recommendations for Assessment of Efficiency of Investment Projects. As for the assimilation of new materials by building companies engaged in construction operations, the recommendation is to assess the business project efficiency upon introduction of each new construction material, and capital investments are the main indicators of efficiency of construction materials, let alone net discounted profit and the payback period. Upon consideration of a number of conditions that underlie the mathematical and economic model that substantiates decision-making in terms of implementation of innovative projects, the project efficiency can be assessed on the basis of an integrated indicator - maximal return on capital investments. The proposed model also takes account of the payback period, although the efficiency of new construction materials does not take account of any positive social effect of their introduction.

Play the game in the opening scene A multidisciplinary lens for understanding (videoludic movies, including Super Mario Bros., Resident Evil and Scott Pilgrim vs. the World

Directory of Open Access Journals (Sweden)

Enrico Gandolfi

2015-09-01

Full Text Available The aim of this article is to create a multidisciplinary tool concerning the passage from the medium of videogames to cinema. According to concepts taken from Media Studies, Cultural Studies, Semiotics and Game Studies, we will explore the multiple dimensions and the related connections that occur in the film linearization of digital interaction: production issues, narrative and aesthetic elements, heuristics and mechanics in-game and on the big screen, and so on. The framework will be tested through three paradigmatic case studies: Super Mario, Resident Evil, and Scott Pilgrim vs. the World. The overall intent is to give scholars, and also practitioners, a holistic perspective on this peculiar type of crossmedia process, pointing out virtuous productive strategies as ruinous ones.

Energy Efficiency, Water Efficiency, and Renewable Energy Site Assessment: Mendenhall Glacier Visitor Center, Juneau, Alaska

Energy Technology Data Exchange (ETDEWEB)

Salasovich, James [National Renewable Energy Lab. (NREL), Golden, CO (United States); LoVullo, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kandt, Alicen [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-01-21

This report summarizes results from the energy efficiency, water efficiency, and renewable energy site assessment of the Mendenhall Glacier Visitor Center and site in Juneau, Alaska. The assessment is an American Society of Heating, Refrigerating, and Air-Conditioning Engineers Level 2 audit and meets Energy Independence and Security Act requirements. A team led by the U.S. Department of Energy's National Renewable Energy Laboratory conducted the assessment with U.S. Forest Service personnel August 19-20, 2015, as part of ongoing efforts by USFS to reduce energy and water use.

Energy-efficiency and proliferation-resistance assessment factors

International Nuclear Information System (INIS)

1979-02-01

Assessment factors suggested with regard to energy efficiency are: preservation of natural non-renewable resources: the degree of security of supply which can be achieved; the availability of necessary raw materials and technology; economic feasibility; and acceptability of a fuel cycle from environmental and safety views. In the area of proliferation resistance, it is suggested that the basic element is the political commitment by a Government not to use imported nuclear materials and equipment to manufacture nuclear explosives. 100% proliferation resistance is considered unattainable in practice. The role of international safeguards in detering possible diversion through the risk of early detection is described, and it is argued that efficient safeguards will force a Government willing to go nuclear to withdraw from its safeguards agreements. The second assessment factor, accordingly, is to consider different fuel cycles with regard to the efficient and rapid building up of a nuclear weapons capacity once the country has withdrawn from its safeguards commitments

Assessing the energy efficiency of pumps and pump units background and methodology

CERN Document Server

Bernd Stoffel, em Dr-Ing

2015-01-01

Assessing the Energy Efficiency of Pumps and Pump Units, developed in cooperation with Europump, is the first book available providing the background, methodology, and assessment tools for understanding and calculating energy efficiency for pumps and extended products (pumps+motors+drives). Responding to new EU requirements for pump efficiency, and US DOE exploratory work in setting pump energy efficiency guidelines, this book provides explanation, derivation, and illustration of PA and EPA methods for assessing energy efficiency. It surveys legislation related to pump energy eff

Travel Efficiency Assessment Method: Three Case Studies

Science.gov (United States)

This slide presentation summarizes three case studies EPA conducted in partnership with Boston, Kansas City, and Tucson, to assess the potential benefits of employing travel efficiency strategies in these areas.

Assessing the efficiency of US electricity markets

International Nuclear Information System (INIS)

Arciniegas, I.; Barrett, C.; Marathe, A.

2003-01-01

The recent California's energy crisis has raised doubts about the benefits of energy deregulation. While it is true that the California electricity market is in turmoil, other electricity markets like the Pennsylvania-NewJersey-Maryland (PJM) are doing fine. This paper assesses the mark of efficiency reached by the electricity markets in California, New York, and PJM. It also compares the degree of efficiency across markets (forward vs. real time) and across time. No significant differences between the California and PJM electricity markets were discovered in the year of California's energy crisis (2000) using the co-integration tests. This research suggests that differences in price behavior between these two markets during 2000 did not arise from differences in efficiency. According to our analysis and measures of efficiency, PJM and California electricity markets are more efficient than the New York market. Also, as these markets become more mature over time, their efficiency level goes up. We also found evidence that a multi-settlement scheduling system leads to higher efficiency. (author)

ASSESSMENT OF THE EFFICIENCY OF DISINFECTION METHOD ...

African Journals Online (AJOL)

eobe

ABSTRACT. The efficiencies of three disinfection methods namely boiling, water guard and pur purifier were assessed. ... Water is an indispensable resource for supporting life systems [2- ...... developing country context: improving decisions.

Assessing Energy Efficiency Opportunities in US Industrial and Commercial Building Motor Systems

Energy Technology Data Exchange (ETDEWEB)

Rao, Prakash; Sheaffer, Paul; McKane, Aimee; Scheihing, Paul

2015-09-01

In 2002, the United States Department of Energy (USDOE) published an energy efficiency assessment of U.S. industrial sector motor systems titled United States Industrial Electric Motor Systems Market Opportunities Assessment. The assessment advanced motor system efficiency by providing a greater understanding of the energy consumption, use characteristics, and energy efficiency improvement potential of industrial sector motor systems in the U.S. Since 2002, regulations such as Minimum Energy Performance Standards, cost reductions for motor system components such as variable frequency drives, system-integrated motor-driven equipment, and awareness programs for motor system energy efficiency have changed the landscape of U.S. motor system energy consumption. To capture the new landscape, the USDOE has initiated a three-year Motor System Market Assessment (MSMA), led by Lawrence Berkeley National Laboratory (LBNL). The MSMA will assess the energy consumption, operational and maintenance characteristics, and efficiency improvement opportunity of U.S. industrial sector and commercial building motor systems. As part of the MSMA, a significant effort is currently underway to conduct field assessments of motor systems from a sample of facilities representative of U.S. commercial and industrial motor system energy consumption. The Field Assessment Plan used for these assessments builds on recent LBNL research presented at EEMODS 2011 and EEMODS 2013 using methods for characterizing and determining regional motor system energy efficiency opportunities. This paper provides an update on the development and progress of the MSMA, focusing on the Field Assessment Plan and the framework for assessing the global supply chain for emerging motors and drive technologies.

Assessing global resource utilization efficiency in the industrial sector

International Nuclear Information System (INIS)

Rosen, Marc A.

2013-01-01

Designing efficient energy systems, which also meet economic, environmental and other objectives and constraints, is a significant challenge. In a world with finite natural resources and large energy demands, it is important to understand not just actual efficiencies, but also limits to efficiency, as the latter identify margins for efficiency improvement. Energy analysis alone is inadequate, e.g., it yields energy efficiencies that do not provide limits to efficiency. To obtain meaningful and useful efficiencies for energy systems, and to clarify losses, exergy analysis is a beneficial and useful tool. Here, the global industrial sector and industries within it are assessed by using energy and exergy methods. The objective is to improve the understanding of the efficiency of global resource use in the industrial sector and, with this information, to facilitate the development, prioritization and ultimate implementation of rational improvement options. Global energy and exergy flow diagrams for the industrial sector are developed and overall efficiencies for the global industrial sector evaluated as 51% based on energy and 30% based on exergy. Consequently, exergy analysis indicates a less efficient picture of energy use in the global industrial sector than does energy analysis. A larger margin for improvement exists from an exergy perspective, compared to the overly optimistic margin indicated by energy. - Highlights: ► The global industrial sector and its industries are assessed by using energy and exergy methods. ► Global industrial sector efficiencies are evaluated as 51% based on energy and 30% based on exergy. ► Exergy analysis shows global industrial energy to be less efficient than does energy analysis. ► A misleadingly low margin for efficiency improvement is indicated by energy analysis. ► A significant and rational margin for efficiency improvement exists from an exergy perspective

Energy Efficiency Practices: Assessment of Ohrid Hotel Industry

OpenAIRE

Petrevska, Biljana; Cingoski, Vlatko

2016-01-01

This paper provides information on the extent how the hotel industry in Ohrid meets the energy efficiency practices in terms of the current level of involvement. By undertaking an online survey in three, four and five-star hotels, the study assesses the attitudes and willingness of hotel managers concerning applying energy efficiency and environmental protection concepts and practices. Moreover, it investigates various determinants of energy consumption, like: solid waste management, resource...

Kyiv institutional buildings sector energy efficiency program: Technical assessment

Energy Technology Data Exchange (ETDEWEB)

Secrest, T.J.; Freeman, S.L. [Pacific Northwest National Lab., Richland, WA (United States); Popelka, A. [Tysak Engineering, Acton, MA (United States); Shestopal, P.A.; Gagurin, E.V. [Agency for Rational Energy Use and Ecology, Kyiv (Ukraine)

1997-08-01

The purpose of this assessment is to characterize the economic energy efficiency potential and investment requirements for space heating and hot water provided by district heat in the stock of state and municipal institutional buildings in the city of Kyiv. The assessment involves three activities. The first is a survey of state and municipal institutions to characterize the stock of institutional buildings. The second is to develop an estimate of the cost-effective efficiency potential. The third is to estimate the investment requirements to acquire the efficiency resource. Institutional buildings are defined as nonresidential buildings owned and occupied by state and municipal organizations. General categories of institutional buildings are education, healthcare, and cultural. The characterization activity provides information about the number of buildings, building floorspace, and consumption of space heating and hot water energy provided by the district system.

A Framework for Comparative Assessments of Energy Efficiency Policy Measures

Energy Technology Data Exchange (ETDEWEB)

Blum, Helcio; Atkinson, Barbara; Lekov, Alex

2011-05-24

When policy makers propose new policies, there is a need to assess the costs and benefits of the proposed policy measures, to compare them to existing and alternative policies, and to rank them according to their effectiveness. In the case of equipment energy efficiency regulations, comparing the effects of a range of alternative policy measures requires evaluating their effects on consumers’ budgets, on national energy consumption and economics, and on the environment. Such an approach should be able to represent in a single framework the particularities of each policy measure and provide comparable results. This report presents an integrated methodological framework to assess prospectively the energy, economic, and environmental impacts of energy efficiency policy measures. The framework builds on the premise that the comparative assessment of energy efficiency policy measures should (a) rely on a common set of primary data and parameters, (b) follow a single functional approach to estimate the energy, economic, and emissions savings resulting from each assessed measure, and (c) present results through a set of comparable indicators. This framework elaborates on models that the U.S. Department of Energy (DOE) has used in support of its rulemakings on mandatory energy efficiency standards. In addition to a rigorous analysis of the impacts of mandatory standards, DOE compares the projected results of alternative policy measures to those projected to be achieved by the standards. The framework extends such an approach to provide a broad, generic methodology, with no geographic or sectoral limitations, that is useful for evaluating any type of equipment energy efficiency market intervention. The report concludes with a demonstration of how to use the framework to compare the impacts estimated for twelve policy measures focusing on increasing the energy efficiency of gas furnaces in the United States.

Energy Efficiency, Water Efficiency, and Renewable Energy Site Assessment: San Juan National Forest - Dolores Ranger District, Colorado

Energy Technology Data Exchange (ETDEWEB)

Kandt, Alicen J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kiatreungwattana, Kosol [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2018-01-26

This report summarizes the results from an energy efficiency, water efficiency, and renewable energy site assessment of the Dolores Ranger District in the San Juan National Forest in Colorado. A team led by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) conducted the assessment with United States Forest Service (USFS) personnel on August 16-17, 2016, as part of ongoing efforts by USFS to reduce energy and water use and implement renewable energy technologies. The assessment is approximately an American Society of Heating, Refrigerating, and Air-Conditioning Engineers Level 2 audit and meets Energy Independence and Security Act requirements.

Energy efficiency and proliferation assessment factors

International Nuclear Information System (INIS)

1979-02-01

The objective of INFCE is to evaluate the nuclear fuel cycles from the point of view of their ability to satisfy the worldwide nuclear energy needs, while minimizing the proliferation risks. Accordingly, the different working groups have to take into consideration as well the energy-efficiency and the proliferation-resistance of these nuclear fuel cycles. The present working paper is aimed at suggesting the main assessment factors which should be taken into consideration

EFFICIENT QUANTITATIVE RISK ASSESSMENT OF JUMP PROCESSES: IMPLICATIONS FOR FOOD SAFETY

OpenAIRE

Nganje, William E.

1999-01-01

This paper develops a dynamic framework for efficient quantitative risk assessment from the simplest general risk, combining three parameters (contamination, exposure, and dose response) in a Kataoka safety-first model and a Poisson probability representing the uncertainty effect or jump processes associated with food safety. Analysis indicates that incorporating jump processes in food safety risk assessment provides more efficient cost/risk tradeoffs. Nevertheless, increased margin of safety...

An Assessment of Air Quality in the Surrounding Holy Places of Mecca, Saudi Arabia during Hajj

Science.gov (United States)

Khwaja, H. A.; Aburizaiza, O. S.; Siddique, A.; Hussain, M. M.; Khatib, F.; Zeb, J.; Blake, D. R.

2014-12-01

The associations of exposure to air pollution and adverse human health effects have been demonstrated in many epidemiologic studies. Hajj, an annual pilgrimage of Islam, draws millions of pilgrims from more than 200 countries for religious rituals in Mecca, Saudi Arabia. The city is surrounded by mountains with a population of 1.7 million, which gets doubles or even more during Hajj. The city centers on the Grand Mosque (Masjid Al-haram), connected with the network of tunnels. Main Hajj pilgrimage route for five days extends 20 km to the east and includes "Mina", "Arafat", and "Muzdalifah". A detailed study was conducted in Mecca, its tunnels, and surrounding holy places during Hajj (October 13-17, 2013). Spatial and temporal variations in total suspended particulate (TSP), PM10 , PM7 , PM2.5 , PM1 , ozone (O3), and black carbon (BC) levels along the route were recorded using portable monitors and GPS to assess the status of air quality. This is the first study to elucidate the exposure to air pollutants among pilgrims. Extremely high levels of all pollutants were observed during the intensive measuring periods. For example, the PM7 , PM2.5 , O3, and BC concentrations of up to 9,433 µg/m3, 484 µg/m3, 444 ppb, and 468 µg/m3, respectively, were observed. Results of this investigation revealed that most routes had on average exceeded the World Health Organization (WHO) standards for PM10 and PM2.5 . The reasons for the high air pollutants concentrations are most probably high volume of traffic, construction work, re-suspension of particles, and geographical conditions (arid regions). The pilgrim's longer trip duration lead to their highest whole trip exposure to air pollutants, which indicate that they are possibly subject to higher health risk. Better understanding of air pollution exposure and their determinants in the environments will contribute to the development of more appropriate exposure reductive strategies and have significant public health meanings.

Assessment of energy efficiency options in the building sector of Lebanon

International Nuclear Information System (INIS)

Chedid, R.B.; Ghajar, R.F.

2004-01-01

This paper examines the merits of implementing energy efficiency policies in the building sector in Lebanon following the approach normally adopted in Climate Change studies. The paper first examines the impact of the energy sector on the Lebanese economy, and then assesses the feasibility of implementing suitable energy efficiency options in the building sector. For this purpose, a detailed analysis of the building sector in Lebanon is presented with emphasis on the thermal characteristics of building envelopes and the energy consuming equipment. The long-term benefits of applying energy efficiency options in the building sector are then assessed using a scenario-type analysis that compares these benefits against those of a baseline scenario that assumes no significant implementation of energy efficiency policies. Finally, feasible options are highlighted and recommendations to remove the major barriers hindering the penetration of energy efficiency options in the Lebanese market are provided

Kyiv institutional buildings sector energy efficiency program: Lending and implementation assessment

Energy Technology Data Exchange (ETDEWEB)

Secrest, T.J.; Freeman, S.L. [Pacific Northwest National Lab., Richland, WA (United States); Popelka, A. [Tysak Engineering, Acton, MA (United States); Shestopal, P.A.; Gagurin, E.V. [Agency for Rational Energy Use and Ecology, Kyiv (Ukraine)

1997-08-01

The government of Ukraine, through the State Committee of Energy Conservation (State Committee), is considering the implementation of energy efficiency measures in state and municipal institutional buildings in the city of Kyiv. The State Committee entered into a Memorandum of Cooperation with the US Department of Energy (DOE) to conduct an assessment of the institutional buildings sector efficiency potential. This assessment will be used to support a potential loan by the World Bank for implementing a buildings efficiency improvement program in Kyiv. This report provides an assessment of the options for structuring the lending scenarios and the implementation of the program. Components to the lending structure are options for the disbursement of funds, options for the loan service, and other financial options and considerations. Program implementation includes management structures, reporting, installation activities, and post-installation activities such as training and verification.

Assessing the efficiency of hospital pharmacy services in Thai public district hospitals.

Science.gov (United States)

Rattanachotphanit, Thananan; Limwattananon, Chulaporn; Limwattananon, Supon; Johns, Jeff R; Schommer, Jon C; Brown, Lawrence M

2008-07-01

The purpose of this study was to assess the efficiency of hospital pharmacy services and to determine the environmental factors affecting pharmacy service efficiency. The technical efficiency of a hospital pharmacy was assessed to evaluate the hospital's ability to use pharmacy manpower in order to produce the maximum output of the pharmacy service. Data Envelopment Analysis (DEA) was used as an efficiency measurement. The two labor inputs were pharmacists and support personnel and the ten outputs were from four pharmacy activities: drug dispensing, drug purchasing and inventory control, patient-oriented activities, and health consumer protection services. This was used to estimate technical efficiency. A Tobit regression model was used to determine the effect of the hospital size, location, input mix of pharmacy staff, working experience of pharmacists at the study hospitals, and use of technology on the pharmacy service efficiency. Data for pharmacy service input and output quantities were obtained from 155 respondents. Nineteen percent were found to have full efficiency with a technical efficiency score of 1.00. Thirty-six percent had a technical efficiency score of 0.80 or above and 27% had a low technical efficiency score (location were significantly associated with pharmacy service efficiency.

Assessing the efficiency of priorities for traffic law enforcement in Norway

DEFF Research Database (Denmark)

Elvik, Rune; Sogge, Céline Vallet; Lager, Lasse

2012-01-01

attributable to them; and (3) an optimal level of enforcement is selected, i.e. the marginal benefits of enforcement in terms of preventing accidents equal the marginal costs of enforcement. The efficiency of current traffic law enforcement in Norway is assessed in terms of these criteria. It is found......This paper assesses the efficiency of priorities for traffic law enforcement in Norway. Priorities are regarded as efficient if: (1) enforcement ensures a sufficient level of deterrence to keep down the rate of violations; (2) selection of target violations for enforcement is based on the risk...... low. Cost-benefit analyses show that substantially increasing the amount of police enforcement is cost-effective....

Assessment of Energy Efficiency Project Financing Alternatives for Brookhaven National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Hunt, W. D.; Hail, John C.; Sullivan, Gregory P.

2000-02-14

This document provides findings and recommendations that resulted from an assessment of the Brookhaven National Laboratory by a team from Pacific Northwest National Laboratory to assess the site's potential for various alternative financing options as a means to implement energy-efficiency improvements. The assessment looked for life-cycle cost-effective energy-efficiency improvement opportunities, and through a series of staff interviews, evaluated the various methods by which these opportunities may be financed, while considering availability of funds, staff, and available financing options. This report summarizes the findings of the visit and the resulting recommendations.

Assessing efficiency of formation of the bank’s system of financial controlling

Directory of Open Access Journals (Sweden)

Chmutova Irina N.

2014-01-01

Full Text Available The article offers a scientific and methodical approach to assessment of efficiency of formation of the bank’s system of financial controlling, which takes into account two components – assessment of efficiency of team work on introduction of financial controlling as an investment project. This would allow identification of expediency of investments into the project on introduction and taking into account not only professional level of the team but also psychological distinctive features of its each member. In order to determine correlations of the assessment components the article forms a matrix that would serve as a basis for development of the necessary complex of actions with respect to increase of the bank’s financial controlling efficiency.

Assessment of the energy efficiency enhancement of future mobile networks

NARCIS (Netherlands)

Litjens, R.; Toh, Y.; Zhang, H.; Blume, O.

2014-01-01

We assess the energy efficiency of mobile networks in 2020, and compare it with a 2010 baseline. A comprehensive assessment approach is taken, considering all relevant scenario aspects such as data traffic growth, hardware evolutions, mobile network deployments and operations including network

Energy efficiency assessment methods and tools evaluation. Bolling Air Force Base. Revision 1

Energy Technology Data Exchange (ETDEWEB)

McMordie, K.L.; Richman, E.E.; Keller, J.M.; Dixon, D.R.

1995-05-01

The goal of the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) is to facilitate energy-efficiency improvements at federal facilities. This is accomplished by a balanced program of technology development, facility assessment, and use of cost-sharing procurement mechanisms. Technology development focuses upon the tools, software, and procedures used to identify and evaluate energy-efficiency technologies and improvements. For facility assessment, FEMP provides metering equipment and trained analysts to federal agencies exhibiting a commitment to improve energy use efficiency. To assist in procurement of energy-efficiency measures, FEMP helps federal agencies devise and implement performance contracting and utility demand-side management strategies. Pacific Northwest Laboratory (PNL) supports the FEMP mission of energy systems modernization. Under this charter, the Laboratory and its contractors work with federal facility energy managers to assess and implement energy-efficiency improvements at federal facilities nationwide.

New Trends of Pilgrimage: Religion and Tourism, Authenticity and Innovation, Development and Intercultural Dialogue: Notes from the Diary of a Pilgrim of Santiago

Directory of Open Access Journals (Sweden)

Corinto Gian

2016-06-01

Full Text Available The characteristics of our society are often contradictory. Despite the "liquidity" theorized by Bauman, aspects and practices deeply related (in appearance and/or in substance with spirituality hold great importance in our days. Among these practices, we found the pilgrimages. In this article we analyse this phenomenon in one of its best-known forms, the religious pilgrimage, in particular that of the Camino de Santiago. Today this forms of “travelling”, the pilgrimage, is studied as a tourism product and a vehicle of local development, and many studies already analysed the profiles and the motivations of the “new pilgrims”, as well as their economic impacts. Nevertheless, we felt the necessity to meet directly the pilgrims and share this experience with them without any filter. We became part of them, by addressing their perception toward their overall experience, using a qualitative approach based on direct observation and unstructured interviews. We collected data during a 400 kilometres walk towards Santiago de Compostela, which enabled us to create a clear overview on this specific, increasing phenomenon: a pilgrimage between religion and tourism, authenticity and innovation, local development and intercultural dialogue.

Healthcare efficiency assessment using DEA analysis in the Slovak Republic.

Science.gov (United States)

Stefko, Robert; Gavurova, Beata; Kocisova, Kristina

2018-03-09

A regional disparity is becoming increasingly important growth constraint. Policy makers need quantitative knowledge to design effective and targeted policies. In this paper, the regional efficiency of healthcare facilities in Slovakia is measured (2008-2015) using data envelopment analysis (DEA). The DEA is the dominant approach to assessing the efficiency of the healthcare system but also other economic areas. In this study, the window approach is introduced as an extension to the basic DEA models to evaluate healthcare technical efficiency in individual regions and quantify the basic regional disparities and discrepancies. The window DEA method was chosen since it leads to increased discrimination on results especially when applied to small samples and it enables year-by-year comparisons of the results. Two stable inputs (number of beds, number of medical staff), three variable inputs (number of all medical equipment, number of magnetic resonance (MR) devices, number of computed tomography (CT) devices) and two stable outputs (use of beds, average nursing time) were chosen as production variable in an output-oriented 4-year window DEA model for the assessment of technical efficiency in 8 regions. The database was made available from the National Health Information Center and the Slovak Statistical Office, as well as from the online databases Slovstat and DataCube. The aim of the paper is to quantify the impact of the non-standard Data Envelopment Analysis (DEA) variables as the use of medical technologies (MR, CT) on the results of the assessment of the efficiency of the healthcare facilities and their adequacy in the evaluation of the monitored processes. The results of the analysis have shown that there is an indirect dependence between the values of the variables over time and the results of the estimated efficiency in all regions. The regions that had low values of the variables over time achieved a high degree of efficiency and vice versa. Interesting

Assessing global resource utilization efficiency in the industrial sector.

Science.gov (United States)

Rosen, Marc A

2013-09-01

Designing efficient energy systems, which also meet economic, environmental and other objectives and constraints, is a significant challenge. In a world with finite natural resources and large energy demands, it is important to understand not just actual efficiencies, but also limits to efficiency, as the latter identify margins for efficiency improvement. Energy analysis alone is inadequate, e.g., it yields energy efficiencies that do not provide limits to efficiency. To obtain meaningful and useful efficiencies for energy systems, and to clarify losses, exergy analysis is a beneficial and useful tool. Here, the global industrial sector and industries within it are assessed by using energy and exergy methods. The objective is to improve the understanding of the efficiency of global resource use in the industrial sector and, with this information, to facilitate the development, prioritization and ultimate implementation of rational improvement options. Global energy and exergy flow diagrams for the industrial sector are developed and overall efficiencies for the global industrial sector evaluated as 51% based on energy and 30% based on exergy. Consequently, exergy analysis indicates a less efficient picture of energy use in the global industrial sector than does energy analysis. A larger margin for improvement exists from an exergy perspective, compared to the overly optimistic margin indicated by energy. Copyright © 2012 Elsevier B.V. All rights reserved.

Efficiency Assessment of Inbound Tourist Service Using Data Envelopment Analysis

Directory of Open Access Journals (Sweden)

Han-Shen Chen

2018-06-01

Full Text Available The successful and sustainable development of inbound tourism necessitates a long-term commitment, balancing between tourism supply and tourist demands. This study manipulated a performance appraisal of tourism service quality in Taiwan with Data Envelopment Analysis (DEA by employing input and output constructs to assess service quality efficiency. The empirical results of the estimation of technical efficiency (TE revealed that (1 the domestic tourism market is competitive, but still needs enhancements for tourism service; (2 Mainland Chinese tourists had the highest score among all foreign tourists, followed by Hong Kong and Macau tourists, tourists from other countries, Japanese tourists, and South Korean tourists; and (3 South Korean tourists had higher travel expenditure than others, but felt less satisfaction with travel services, which can be regarded as inefficient. Tourists from other countries had lower travel expenditure, but had higher satisfaction levels, which was considered efficient based on input and output index. The findings could contribute to bridging the gap between research and practice in assessing the efficiency of inbound tourist service. Tourism practitioners should be aware of tourists’ needs and interests, as these could be key fundamentals for improving tourists’ satisfaction with Taiwan’s service offerings.

Sampling efficiency for species composition assessments using the ...

African Journals Online (AJOL)

A pilot survey to determine the sampling efficiency of the wheel-point method, using the nearest plant method, to assess species composition (using replicate similarity related to sampling intensity, and total sampling time) was conducted on three plot sizes (20 x 20m, 30 x 30m, 40 x 40m) at two sites in a semi-arid savanna.

Unitary assessment of economical efficiency of the energy resources for electricity production in Romania

International Nuclear Information System (INIS)

Luca, Gheorghe

2004-01-01

In our country, within the studies, on which the development strategies of power output are based on, the assessment of the economical efficiency of the use of two main energetic resources, the fuel used in cogeneration thermal power plants and the water used in hydropower plants respectively, was made in compliance with non-unitary specific norms. In contradiction with the degree of utilization of hydroelectric resources, realized all over the world in the developed countries (80-90%) resulted that in our country, where the degree of utilization is only 40%, the use of hydroelectric potential is not yet justified from technical-economical point of view. This anomaly was determined by the cause of non-unitary assessment of the economic efficiency for the cogeneration thermo-power plants and hydropower plants. This paper presents comparatively the elements, which were to the basis of the assessment of the economic efficiency for two types of electrical power plants, and one presents a proposal in the aim to perform a unitary assessment of the economical efficiency by applying efficiently the laws in force. (author)

Environmental assessment. Energy efficiency standards for consumer products

Energy Technology Data Exchange (ETDEWEB)

McSwain, Berah

1980-06-01

The Energy Policy and Conservation Act of 1975 requires DOE to prescribe energy efficiency standards for 13 consumer products. The Consumer Products Efficiency Standards (CPES) program covers: refrigerators and refrigerator-freezers, freezers, clothes dryers, water heaters, room air conditioners, home heating equipment, kitchen ranges and ovens, central air conditioners (cooling and heat pumps), furnaces, dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers. This Environmental Assessment evaluates the potential environmental and socioeconomic impacts expected as a result of setting efficiency standards for all of the consumer products covered by the CPES program. DOE has proposed standards for eight of the products covered by the Program in a Notice of Proposed Rulemaking (NOPR). DOE expects to propose standards for home heating equipment, central air conditioners (heat pumps only), dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers in 1981. No significant adverse environmental or socioeconomic impacts have been found to result from instituting the CPES.

Assessing the Level of Efficiency of The Stock Exchange of Mauritius

African Journals Online (AJOL)

admpather

This paper assesses the level of efficiency of SEM by using a sample the ... price efficiency observed on the SEM is of great importance to an investor. ... Market, has been created to account for firms quoted on the OTC market, Small and ... where prices quickly reflected new value changing information and the strong form.

REMOTE SENSING EFFICIENCY FOR URBAN ANALYSIS OF MECCA AND SURROUNDS

Directory of Open Access Journals (Sweden)

A. Imam

2016-06-01

Full Text Available Situated in the southwest of Saudi Arabia, Mecca is considered the spiritual capital of one and a half billion worldwide Muslims. The city is visited by millions of pilgrims every year. It has undergone significant changes in land cover (LC since the government first embarked on a series of ambitious development projects 20 years ago to accommodate the growing number of pilgrims and citizens. The main objective of our study is to detect, identify, analyze and measure the evolving land cover and urban morphology composition from multi-temporal satellite images. To characterize the morphological change during a period of twenty years, four satellite images, acquired in 1998 by Landsat TM and in 2003, 2008 and 2013 by Landsat ETM+, were classified into five main categories: Urban, Street, Soil and Vegetation. In addition, DEM has been extracted and included as Mountain. Change detection (CD analysis is applied using post-classification comparison and GIS. As part of the study, morphological index, such as, Entropy is included for better understanding of urban structures behaviour. Mecca and its surroundings show a noticeable increase in urban and vegetation cover. Urban cover (UC changes were divided into five radial directions: Northeast, Southeast, Southwest, East, and Northwest. These changes are influenced by mountain ranges surrounding the city and the highways. These revelations can play a significant role towards future planning and development activities, which may further promote urban growth.

Remote Sensing Efficiency for Urban Analysis of Mecca and Surrounds

Science.gov (United States)

Imam, Ayman; Alhaddad, Bahaa; Roca, Josep

2016-06-01

Situated in the southwest of Saudi Arabia, Mecca is considered the spiritual capital of one and a half billion worldwide Muslims. The city is visited by millions of pilgrims every year. It has undergone significant changes in land cover (LC) since the government first embarked on a series of ambitious development projects 20 years ago to accommodate the growing number of pilgrims and citizens. The main objective of our study is to detect, identify, analyze and measure the evolving land cover and urban morphology composition from multi-temporal satellite images. To characterize the morphological change during a period of twenty years, four satellite images, acquired in 1998 by Landsat TM and in 2003, 2008 and 2013 by Landsat ETM+, were classified into five main categories: Urban, Street, Soil and Vegetation. In addition, DEM has been extracted and included as Mountain. Change detection (CD) analysis is applied using post-classification comparison and GIS. As part of the study, morphological index, such as, Entropy is included for better understanding of urban structures behaviour. Mecca and its surroundings show a noticeable increase in urban and vegetation cover. Urban cover (UC) changes were divided into five radial directions: Northeast, Southeast, Southwest, East, and Northwest. These changes are influenced by mountain ranges surrounding the city and the highways. These revelations can play a significant role towards future planning and development activities, which may further promote urban growth.

International experience in addressing combined exposures: Increasing the efficiency of assessment

International Nuclear Information System (INIS)

Meek, M.E.

2013-01-01

More efficient methodology for assessing the impact of combined exposures to multiple chemicals has been considered in a project of the World Health Organization (WHO) International Programme on Chemical Safety (IPCS). Recommendations regarding terminology and the status of development of the framework, its content, review and application are described. Evolving experience in its application is illustrated by example (polybrominated diphenyls) with special emphasis on the critical content of problem formulation, the role of predictive tools in grouping of chemicals for consideration and the importance of explicit delineation of relative uncertainty and sensitivity for tiered assessment. Priorities in increasing the efficiency of risk assessment not only for combined exposures, but more generally based on experience acquired in developing the framework and its application in case studies are identified and recommendations included

Assessment of academic departments efficiency using data envelopment analysis

Directory of Open Access Journals (Sweden)

Salah R. Agha

2011-07-01

Full Text Available Purpose: In this age of knowledge economy, universities play an important role in the development of a country. As government subsidies to universities have been decreasing, more efficient use of resources becomes important for university administrators. This study evaluates the relative technical efficiencies of academic departments at the Islamic University in Gaza (IUG during the years 2004-2006. Design/methodology/approach: This study applies Data Envelopment Analysis (DEA to assess the relative technical efficiency of the academic departments. The inputs are operating expenses, credit hours and training resources, while the outputs are number of graduates, promotions and public service activities. The potential improvements and super efficiency are computed for inefficient and efficient departments respectively. Further, multiple linear -regression is used to develop a relationship between super efficiency and input and output variables.Findings: Results show that the average efficiency score is 68.5% and that there are 10 efficient departments out of the 30 studied. It is noted that departments in the faculty of science, engineering and information technology have to greatly reduce their laboratory expenses. The department of economics and finance was found to have the highest super efficiency score among the efficient departments. Finally, it was found that promotions have the greatest contribution to the super efficiency scores while public services activities come next.Research limitations/implications: The paper focuses only on academic departments at a single university. Further, DEA is deterministic in nature.Practical implications: The findings offer insights on the inputs and outputs that significantly contribute to efficiencies so that inefficient departments can focus on these factors.Originality/value: Prior studies have used only one type of DEA (BCC and they did not explicitly answer the question posed by the inefficient

Assessing measures of energy efficiency performance and their application in industry

Energy Technology Data Exchange (ETDEWEB)

Tanaka, K.

2008-02-15

This paper explores different measures of energy efficiency performance (hereafter referred to as 'MEEP'): absolute energy consumption, energy intensity, diffusion of specific energy-saving technology and thermal efficiency. It discusses their advantages and disadvantages and their roles within policy frameworks. MEEP may be necessary at several stages during policy design: in a developing regulatory framework; during the actual application; and in evaluation after policy implementation. Policy makers should consider the suitability of MEEP at each of these stages, based on criteria such as reliability, feasibility and verifiability. The paper considers the importance of so-called boundary definitions when measuring energy performance, and how these affect the appropriateness of country comparisons to guide policy decisions. The paper also addresses the limitations of both energy intensity and technology diffusion indicators as measures of energy efficiency performance. A case study on Japan's iron and steel industry illustrates the critical role of proper boundary definitions for a meaningful assessment of energy efficiency in industry. Depending on the boundaries set for the analysis, the energy consumption per ton of crude steel ranges from 16 to 21 GJ. Both a proper understanding of various methods to assess energy efficiency and the linkage with policy objectives and frameworks are important. Using the diffusion rates of specific energy-efficient processes is a technology-oriented approach which seeks to encourage the retrofitting or replacement of less efficient equipment. There are fewer boundary problems using diffusion rates than by calculating energy consumption. 42 refs., 15 figs., 4 tabs., 1 app.

Self-assessment as an approach to improvement of efficient implementation of Ukrainian NPP operational experience

International Nuclear Information System (INIS)

Pecheritsya, L.M.; Lyigots'kij, O.Yi.; Pecheritsya, O.V.; Tarasenko, V.M.

2012-01-01

the paper contains a brief description of the procedure for implementation of operational experience, focuses on the role of self -assessment in efficient use of operational experience, presents a review of international and national practices of self-assessment and review of the main features, issues and ways to improve self-assessment of efficient use of operational experience in Ukraine

[The Probabilistic Efficiency Frontier: A Value Assessment of Treatment Options in Hepatitis C].

Science.gov (United States)

Mühlbacher, Axel C; Sadler, Andrew

2017-06-19

Background The German Institute for Quality and Efficiency in Health Care (IQWiG) recommends the concept of the efficiency frontier to assess health care interventions. The efficiency frontier supports regulatory decisions on reimbursement prices for the appropriate allocation of health care resources. Until today this cost-benefit assessment framework has only been applied on the basis of individual patient-relevant endpoints. This contradicts the reality of a multi-dimensional patient benefit. Objective The objective of this study was to illustrate the operationalization of multi-dimensional benefit considering the uncertainty in clinical effects and preference data in order to calculate the efficiency of different treatment options for hepatitis C (HCV). This case study shows how methodological challenges could be overcome in order to use the efficiency frontier for economic analysis and health care decision-making. Method The operationalization of patient benefit was carried out on several patient-relevant endpoints. Preference data from a discrete choice experiment (DCE) study and clinical data based on clinical trials, which reflected the patient and the clinical perspective, respectively, were used for the aggregation of an overall benefit score. A probabilistic efficiency frontier was constructed in a Monte Carlo simulation with 10000 random draws. Patient-relevant endpoints were modeled with a beta distribution and preference data with a normal distribution. The assessment of overall benefit and costs provided information about the adequacy of the treatment prices. The parameter uncertainty was illustrated by the price-acceptability-curve and the net monetary benefit. Results Based on the clinical and preference data in Germany, the interferon-free treatment options proved to be efficient for the current price level. The interferon-free therapies of the latest generation achieved a positive net cost-benefit. Within the decision model, these therapies

ABOUT FORMS, EFFICIENCY AND ASSESSMENT OF ENVIRONMENTAL MANAGEMENT

Directory of Open Access Journals (Sweden)

H. Bachev

2015-03-01

Full Text Available We suggest a holistic framework for analyzing, assessment and improvement of environmental management using “agrariansector” as an example. It incorporates an interdisciplinary approach (Economics, Organization, Law, Sociology, Ecology, Technology, Behavioral and Political Sciences and includes: specification of managerial actors, needs and spectrum of governing modes (institutional environment; private, collective, market, public modes at different level of decision-making (individual, farm, eco-system, local, regional, national, transnational, global; specification of critical socio-economic, natural, technological, behavioral etc. factors of managerial choice, and feasible spectrum of managerial forms; defining and assessing comparative and absolute efficiency of eco-management forms and system; improvement of forms of public intervention in eco-management.

Policies of energy efficiency: problematic, means and tools of assessment

International Nuclear Information System (INIS)

Chateau, Bertrand

2016-02-01

As energy efficiency has become one of the main issues and even a pillar of energy policies and policies of struggle against climate change, this article discusses the various aspects of this issue which may also mean energy savings in some situations. Thus, energy efficiency encompasses all changes associated with a decrease of the energy required to produce an economic activity unit, or to obtain a given level of comfort. Implementing public policies for energy efficiency supposes the adoption of means of action aimed at acting on the different levers of energy efficiency improvement. The author first discusses to which extent and how it is better to improve energy efficiency rather than let increase investments in energy production and distribution, emissions and energy imports. He therefore discusses the various types of measures: information, incentive and financial, economic, regulatory, or others. In the second part, he discusses how to assess the results of energy efficiency policies, and more particularly at the level of global economy and of main sectors by using various indicators like energetic intensity, final energetic intensity at constant structure, or technical-economic indicators

Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

Directory of Open Access Journals (Sweden)

Ika Rinawati Dyah

2018-01-01

Full Text Available Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

Science.gov (United States)

Rinawati, Dyah Ika; Sriyanto; Sari, Diana Puspita; Prayodha, Andana Cantya

2018-02-01

Furniture is one of Indonesia's main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

A method of identifying and weighting indicators of energy efficiency assessment in Chinese residential buildings

International Nuclear Information System (INIS)

Yang Yulan; Li Baizhan; Yao Runming

2010-01-01

This paper describes a method of identifying and weighting indicators for assessing the energy efficiency of residential buildings in China. A list of indicators of energy efficiency assessment in residential buildings in the hot summer and cold winter zone in China has been proposed, which supplies an important reference for policy makings in energy efficiency assessment in buildings. The research method applies a wide-ranging literature review and a questionnaire survey involving experts in the field. The group analytic hierarchy process (group AHP) has been used to weight the identified indicators. The size of survey samples are sufficient to support the results, which has been validated by consistency estimation. The proposed method could also be extended to develop the weighted indicators for other climate zones in China. - Research highlights: →Method of identifying indicators of building energy efficiency assessment. →The group AHP method for weighting indicators. →Method of solving multi-criteria decision making problems of choice and prioritisation in policy makings.

A method of identifying and weighting indicators of energy efficiency assessment in Chinese residential buildings

Energy Technology Data Exchange (ETDEWEB)

Yang Yulan [Key Laboratory of the Three Gorges Reservoir Region' s Eco-Environment under Ministry of Education, Chongqing University, Chongqing (China); College of Civil Engineering and Architecture, Zhejiang University of Technology, Hangzhou (China); Li Baizhan [Key Laboratory of the Three Gorges Reservoir Region' s Eco-Environment under the Ministry of Education, Chongqing University, Chongqing (China); Yao Runming, E-mail: r.yao@reading.ac.u [School of Construction Management and Engineering, University of Reading, Reading (United Kingdom); Key Laboratory of the Three Gorges Reservoir Region' s Eco-Environment under Ministry of Education, Chongqing University, Chongqing (China)

2010-12-15

This paper describes a method of identifying and weighting indicators for assessing the energy efficiency of residential buildings in China. A list of indicators of energy efficiency assessment in residential buildings in the hot summer and cold winter zone in China has been proposed, which supplies an important reference for policy makings in energy efficiency assessment in buildings. The research method applies a wide-ranging literature review and a questionnaire survey involving experts in the field. The group analytic hierarchy process (group AHP) has been used to weight the identified indicators. The size of survey samples are sufficient to support the results, which has been validated by consistency estimation. The proposed method could also be extended to develop the weighted indicators for other climate zones in China. - Research highlights: {yields}Method of identifying indicators of building energy efficiency assessment. {yields}The group AHP method for weighting indicators. {yields}Method of solving multi-criteria decision making problems of choice and prioritisation in policy makings.

Religiously Motivated Travel and Rural Tourism in Vhembe District of South Africa

Directory of Open Access Journals (Sweden)

Gyekye Agyapong

2014-01-01

Full Text Available The study investigated the socio-economic impact of religious tourism (UAAC gathering on the local tourism industry and on surrounding rural communities in Vhembe District Municipality (VDM of South Africa. Questionnaires were used to collect data on pilgrims (visitors, businesses, and residents during, and immediately after the event. Statistical techniques were used to analyse the data to gain insight into the data as basis for answering the research questions posed in this study. The results revealed that majority of the pilgrims to the UAAC gathering were from the host province of Limpopo. Also, most pilgrims travel to the pilgrimage site solely for religious reasons. Another significant finding is that the average spending per pilgrim by pilgrims from the rest of South Africa is larger than their Limpopo and foreign pilgrim counterparts. Furthermore, the results showed that while businesses were positive about the pilgrimage’s contribution to increased sales from their businesses, they at the same time opined that the event does not generate any additional employment. This could be because out of every R100 of pilgrims spending only R2.16 remains in the local economy through leakages. Finally an important finding of the study is overall consensus among residents that the annual pilgrimage gathering promotes morality, improved socialization as well as a sense of feeling good and proud of their community.

A holistic method to assess building energy efficiency combining D-S theory and the evidential reasoning approach

International Nuclear Information System (INIS)

Yao Runming; Yang Yulan; Li Baizhan

2012-01-01

The assessment of building energy efficiency is one of the most effective measures for reducing building energy consumption. This paper proposes a holistic method (HMEEB) for assessing and certifying energy efficiency of buildings based on the D-S (Dempster-Shafer) theory of evidence and the Evidential Reasoning (ER) approach. HMEEB has three main features: (i) it provides both a method to assess and certify building energy efficiency, and exists as an analytical tool to identify improvement opportunities; (ii) it combines a wealth of information on building energy efficiency assessment, including identification of indicators and a weighting mechanism; and (iii) it provides a method to identify and deal with inherent uncertainties within the assessment procedure. This paper demonstrates the robustness, flexibility and effectiveness of the proposed method, using two examples to assess the energy efficiency of two residential buildings, both located in the ‘Hot Summer and Cold Winter’ zone in China. The proposed certification method provides detailed recommendations for policymakers in the context of carbon emission reduction targets and promoting energy efficiency in the built environment. The method is transferable to other countries and regions, using an indicator weighting system to modify local climatic, economic and social factors. - Highlights: ► Assessing energy efficiency of buildings holistically; ► Applying the D-S (Dempster-Shafer) theory of evidence and the Evidential Reasoning (ER) approach; ► Involving large information and uncertainties in the energy efficiency decision-making process. ► rigorous measures for policymakers to meet carbon emission reduction targets.

Variable fuzzy assessment of water use efficiency and benefits in irrigation district

Directory of Open Access Journals (Sweden)

Ming-hui Wang

2015-07-01

Full Text Available In order to scientifically and reasonably evaluate water use efficiency and benefits in irrigation districts, a variable fuzzy assessment model was established. The model can reasonably determine the relative membership degree and relative membership function of the sample indices in each index's standard interval, and obtain the evaluation level of the sample through the change of model parameters. According to the actual situation of the Beitun Irrigation District, which is located in Fuhai County, in Altay City, Xinjiang Uyghur Autonomous Region, five indices were selected as evaluation factors, including the canal water utilization coefficient, field water utilization coefficient, crop water productivity, effective irrigation rate in farmland, and water-saving irrigation area ratio. The water use efficiency and benefits in the Beitun Irrigation District in different years were evaluated with the model. The results showed that the comprehensive evaluation indices from 2006 to 2008 were all at the third level (medium efficiency, while the index in 2009 increased slightly, falling between the second level (relatively high efficiency and third level, indicating an improvement in the water use efficiency and benefits in the Beitun Irrigation District, which in turn showed that the model was reliable and easy to use. This model can be used to assess the water use efficiency and benefits in similar irrigation districts.

Energy Efficiency, Water Efficiency, and Renewable Energy Site Assessment: Seneca Rocks Discovery Center, Seneca Rocks, West Virginia

Energy Technology Data Exchange (ETDEWEB)

Kiatreungwattana, Kosol [National Renewable Energy Lab. (NREL), Golden, CO (United States); Salasovich, James [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kandt, Alicen [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-03-22

As part of ongoing efforts by the U.S. Forest Service to reduce energy use and incorporate renewable energy technologies into its facilities, the Department of Energy's National Renewable Energy Laboratory performed an energy efficiency and renewable energy site assessment of the Seneca Rocks Discovery Center in Seneca Rocks, West Virginia. This report documents the findings of this assessment, and provides site-specific information for the implementation of energy and water conservation measures, and renewable energy measures.

Fort Lewis natural gas and fuel oil energy baseline and efficiency resource assessment

International Nuclear Information System (INIS)

Brodrick, J.R.; Daellenbach, K.K.; Parker, G.B.; Richman, E.E.; Secrest, T.J.; Shankle, S.A.

1993-02-01

The mission of the US Department of Energy (DOE) Federal Energy Management Program (FEMP) is to lead the improvement of energy efficiency and fuel flexibility within the federal sector. Through the Pacific Northwest Laboratory (PNL), FEMP is developing a fuel-neutral approach for identifying, evaluating, and acquiring all cost-effective energy projects at federal installations; this procedure is entitled the Federal Energy Decision Screening (FEDS) system. Through a cooperative program between FEMP and the Army Forces Command (FORSCOM) for providing technical assistance to FORSCOM installations, PNL has been working with the Fort Lewis Army installation to develop the FEDS procedure. The natural gas and fuel oil assessment contained in this report was preceded with an assessment of electric energy usage that was used to implement a cofunded program between Fort Lewis and Tacoma Public Utilities to improve the efficiency of the Fort's electric-energy-using systems. This report extends the assessment procedure to the systems using natural gas and fuel oil to provide a baseline of consumption and an estimate of the energy-efficiency potential that exists for these two fuel types at Fort Lewis. The baseline is essential to segment the end uses that are targets for broad-based efficiency improvement programs. The estimated fossil-fuel efficiency resources are estimates of the available quantities of conservation for natural gas, fuel oils number-sign 2 and number-sign 6, and fuel-switching opportunities by level of cost-effectiveness. The intent of the baseline and efficiency resource estimates is to identify the major efficiency resource opportunities and not to identify all possible opportunities; however, areas of additional opportunity are noted to encourage further effort

SENSITIVITAS KUMAN NEISSERIA MENINGITIDIS YANG DIISOLASI DARI JAMAAH HAJI INDONESIA TERHADAP BEBERAPA ANTIBIOTIK

Directory of Open Access Journals (Sweden)

Muljati Prijanto

2012-09-01

Full Text Available The meningitis meningococcal disease caused by Neisseriae meningitidis is an infection of meninges and cerebrospinal fluid (CSF of the brain and the spinal cord. N. meningitidis is classified into 13 serogroups based on the immunologic reactivity of the capsular polysaccharide. Since 1993 the number of cases and carriers of haj pilgrims from Indonesia have increased. In 1996 the carrier rate was 9,4%, and case fatality rate of Indonesian haj pilgrims in Saudi Arabia was 71,4%. The dominant serogroup was serogroup B. The meningitis vaccine of serogroup B is not available yet. Until now there is not enough information of the laboratory results from the hospital in Saudi Arabia, regarding the strain that caused the infection of haj pilgrims from Indonesia. To prevent transmission of the disease among Haj pilgrims, since 1997, chemoprophylaxis with ciprofloxacine has been given to close contact persons of haj pilgrim patient. The objectives of this study are: First, to know the effectiveness of ciprofloxacin in decreasing the carrier rate of meningitis meningococcus in haj pilgrims. Second, to identify the serogroup of N. meningitidis isolated from carrier or patient and thirdly to know the sensitivity of bacteria to several antibiotics recommended by WHO. Nasofaringeal swabs were taken from 914 haj pilgrims from group of contact person of cases or suspected cases and 311 haj pilgrims from control group at embarkation in Jakarta. Ciprofloxacin was given to the study group in Saudi Arabia. Isolation and serogrouping were carried out for serogroup A, B, C. The result shows that the effectiveness of ciprofloxacin to N. meningitidis in the treated group were 98.58% and control were 85.54%, respectively. The serogroup of N. meningitidis is isolated from 13 carriers of treated group 69,23% could not be classified as serogroup A, B, or C. In the control group, 45 isolated strains from carriers consist of serogroup B 40%, serogroup C 28,9%, serogroup A 20

Assessing Green Development Efficiency of Municipalities and Provinces in China Integrating Models of Super-Efficiency DEA and Malmquist Index

Directory of Open Access Journals (Sweden)

Qing Yang

2015-04-01

Full Text Available In order to realize economic and social green development, to pave a pathway towards China’s green regional development and develop effective scientific policy to assist in building green cities and countries, it is necessary to put forward a relatively accurate, scientific and concise green assessment method. The research uses the CCR (A. Charnes & W. W. Cooper & E. Rhodes Data Envelopment Analysis (DEA model to obtain the green development frontier surface based on 31 regions’ annual cross-section data from 2008–2012. Furthermore, in order to classify the regions whereby assessment values equal to 1 in the CCR model, we chose the Super-Efficiency DEA model for further sorting. Meanwhile, according to the five-year panel data, the green development efficiency changes of 31 regions can be manifested by the Malmquist index. Finally, the study assesses the reasons for regional differences; while analyzing and discussing the results may allude to a superior green development pathway for China.

Expected immunizations and health protection for Hajj and Umrah 2018 -An overview.

Science.gov (United States)

Al-Tawfiq, Jaffar A; Gautret, Philippe; Memish, Ziad A

2017-09-01

The annual Hajj and Umrah are one of the largest recurring religious mass gatherings across the globe drawing pilgrims from more than 185 countries. The living circumstances and activities of the pilgrims may create an environment for the occurrence and spread of communicable diseases. Each year, the Health authority of the Kingdom of Saudi Arabia, in coordination with international health authorities, updates health requirements for pilgrims. The Hajj for 2017 took place from August 24 to September 5, 2017. Here, we review the expected obligations for immunizations for the 2018 Hajj and Umrah. The Hajj and Umrah vaccine requirements include mandatory vaccinations against yellow fever, quadrivalent meningococcal polysaccharide (every 3 years) or conjugated (every 5 years) vaccines and poliomyelitis vaccine. Influenza vaccine utilizing the 2016 (Southern Hemisphere vaccine to all pilgrims) was recommended but was not obligatory for pilgrims. Ciprofloxacin is required for individuals >12 years excluding pregnant women as chemoprophylaxis to be given at the port of entry for Pilgrims coming from the meningitis belt. With the ongoing outbreaks of measles in Europe, it is recommended that all pilgrims have an updated immunization against vaccine-preventable diseases (diphtheria, tetanus, pertussis, polio, measles and mumps). The mandatory vaccines remain the same with continued vigilance for the development of any new or emerging infectious diseases. Continuing surveillance for Zika virus, cholera and MERS-CoV are ongoing. Copyright © 2017 Elsevier Ltd. All rights reserved.

Model of Efficiency Assessment of Regulation In The Banking Seсtor

Directory of Open Access Journals (Sweden)

Irina V. Larionova

2014-01-01

Full Text Available In this article, the modern system of regulation of the national banking sector is viewed, which, according to the author, needs theoretical judgment, structuring, disclosure of the maintenance of efficiency of functioning is considered. The system of regulation reveals on a system basis, it is offered to consider it as set of elements and the mechanism of their interaction which are formed taking into account target reference points of regulation. Thus it is emphasized that for regulation the contradiction is concluded: achievement of financial stability of functioning of the banking sector, as a rule, contains economic growth. The need for development of theoretical ideas of efficiency of regulation of the banking sector gains special relevance taking into account the latest events connected with revocation of licenses of commercial banks on implementation of bank activity, the high cost of credit resources for managing subjects, an insignificant contribution of the banking sector to ensuring rates of economic growth. The author offered criteria of efficiency of regulation of the banking sector to which are referred: functional, operational, social, and economic efficiency. Functional efficiency opens ability of each subsystem of regulation to carry out the functions ordered by the law. Operational efficiency describes correctness suffered by the regulator and commercial banks of the expenses connected with regulating influence. At last, social and economic efficiency is connected with degree of compliance of a field of activity of the banking sector to requirements of national economy, and responsibility of banking business before society. For each criterion of efficiency of regulation of the banking sector the set of the quantitative and quality indicators, allowing to give the corresponding assessment of the working model of crediting is offered. The aggregated expert assessment of the Russian system of regulation of the banking sector

Comprehensive Assessment of the Potential for Efficient District Heating and Cooling and for High-Efficient Cogeneration in Austria

Directory of Open Access Journals (Sweden)

Richard Büchele

2016-12-01

Full Text Available In accordance with the EU Energy Efficiency Directive all Member States have to develop a comprehensive assessment of the potential for high-efficient CHP and efficient district heating and cooling by the end of 2015. This paper describes the approach and methodology used to determine the district heating potentials for Austria. In a first step actual and future heating and cooling demand in the building sector is evaluated using the techno-economic bottom-up model Invert/EE-Lab. Relevant infrastructure probably existing in 2025 is investigated and included into the analysis. Technical potentials for efficient technologies are calculated. After a classification of relevant regions into main and secondary regions a country-level cost-benefit-analysis is performed. The results indicate that there is a reasonable additional potential for district heating by the year 2025 under our central scenario assumptions and within sensitivity scenarios. Only in scenarios with high CO2-price or low gas price, CHP is an economically efficient solution to supply district heat.

Assessing eco-efficiency: A metafrontier directional distance function approach using life cycle analysis

International Nuclear Information System (INIS)

Beltrán-Esteve, Mercedes; Reig-Martínez, Ernest; Estruch-Guitart, Vicent

2017-01-01

Sustainability analysis requires a joint assessment of environmental, social and economic aspects of production processes. Here we propose the use of Life Cycle Analysis (LCA), a metafrontier (MF) directional distance function (DDF) approach, and Data Envelopment Analysis (DEA), to assess technological and managerial differences in eco-efficiency between production systems. We use LCA to compute six environmental and health impacts associated with the production processes of nearly 200 Spanish citrus farms belonging to organic and conventional farming systems. DEA is then employed to obtain joint economic-environmental farm's scores that we refer to as eco-efficiency. DDF allows us to determine farms' global eco-efficiency scores, as well as eco-efficiency scores with respect to specific environmental impacts. Furthermore, the use of an MF helps us to disentangle technological and managerial eco-inefficiencies by comparing the eco-efficiency of both farming systems with regards to a common benchmark. Our core results suggest that the shift from conventional to organic farming technology would allow a potential reduction in environmental impacts of 80% without resulting in any decline in economic performance. In contrast, as regards farmers' managerial capacities, both systems display quite similar mean scores.

Assessing eco-efficiency: A metafrontier directional distance function approach using life cycle analysis

Energy Technology Data Exchange (ETDEWEB)

Beltrán-Esteve, Mercedes, E-mail: mercedes.beltran@uv.es [Department of Applied Economics II, University of Valencia (Spain); Reig-Martínez, Ernest [Department of Applied Economics II, University of Valencia, Ivie (Spain); Estruch-Guitart, Vicent [Department of Economy and Social Sciences, Polytechnic University of Valencia (Spain)

2017-03-15

Sustainability analysis requires a joint assessment of environmental, social and economic aspects of production processes. Here we propose the use of Life Cycle Analysis (LCA), a metafrontier (MF) directional distance function (DDF) approach, and Data Envelopment Analysis (DEA), to assess technological and managerial differences in eco-efficiency between production systems. We use LCA to compute six environmental and health impacts associated with the production processes of nearly 200 Spanish citrus farms belonging to organic and conventional farming systems. DEA is then employed to obtain joint economic-environmental farm's scores that we refer to as eco-efficiency. DDF allows us to determine farms' global eco-efficiency scores, as well as eco-efficiency scores with respect to specific environmental impacts. Furthermore, the use of an MF helps us to disentangle technological and managerial eco-inefficiencies by comparing the eco-efficiency of both farming systems with regards to a common benchmark. Our core results suggest that the shift from conventional to organic farming technology would allow a potential reduction in environmental impacts of 80% without resulting in any decline in economic performance. In contrast, as regards farmers' managerial capacities, both systems display quite similar mean scores.

Tool for assessing eco-efficiency in urban planning and design

Energy Technology Data Exchange (ETDEWEB)

Lahti, P., Email: pekka.lahti@vtt.fi

2012-06-15

The goal of this project was to develop a fast, comprehensive and user-friendly eco-efficiency estimation method for urban development. A preliminary study concluded that urban planners, designers and architects lack a practical and comprehensive tool for the overall assessment of community-level ecological performance. The report on the tool itself concluded findings concerning the needs of urban planners and designers in the City of Helsinki, which were transferred to the structure and contents of the assessment tool. The project continues the development efforts during the next couple of years, integrating 14 partners. (orig.)

Using location tracking data to assess efficiency in established clinical workflows.

Science.gov (United States)

Meyer, Mark; Fairbrother, Pamela; Egan, Marie; Chueh, Henry; Sandberg, Warren S

2006-01-01

Location tracking systems are becoming more prevalent in clinical settings yet applications still are not common. We have designed a system to aid in the assessment of clinical workflow efficiency. Location data is captured from active RFID tags and processed into usable data. These data are stored and presented visually with trending capability over time. The system allows quick assessments of the impact of process changes on workflow, and isolates areas for improvement.

Development and efficiency assessment of process lubrication for hot forging

Science.gov (United States)

Kargin, S.; Artyukh, Viktor; Ignatovich, I.; Dikareva, Varvara

2017-10-01

The article considers innovative technologies in testing and production of process lubricants for hot bulk forging. There were developed new compositions of eco-friendly water-graphite process lubricants for hot extrusion and forging. New approaches to efficiency assessment of process lubricants are developed and described in the following article. Laboratory and field results are presented.

Ilmusid Ollinovski ja Pessoa kogud

Index Scriptorium Estoniae

2009-01-01

Ollinovski, Jim. Aeroplaan esimesest pilgust. Tallinn : Pilgrim, 2009 ; Pessoa, Fernando. Tubakapood : ́Alvaro de Campose viimased luuletused. Tallinn : Pilgrim Group, 2009. Esitlus 2. dets. Tallinnas Von Krahli teatris

Scoping in environmental impact assessment: Balancing precaution and efficiency?

International Nuclear Information System (INIS)

Snell, Tim; Cowell, Richard

2006-01-01

Scoping is a crucial yet under-researched stage of environmental impact assessment, in which practice falls well behind conceptual ideals. We argue that such 'implementation deficits' reflect dilemmas between two key rationales for scoping - environmental precaution and decision-making efficiency - and between technical and participatory conceptions of the decision-making process. We use qualitative research to understand how scoping practice in the UK reconciles these competing imperatives. Our findings suggest that practitioners mainly rationalise their approach in terms of decision-making efficiency, while justifying excluding the public from scoping on grounds of prematurity, delay and risks of causing confusion. The tendency to scope issues in rather than exclude them reflects a pervasive concern for legal challenge, rather than environmental precaution, but this reinforces standard lists of environmental considerations rather than the investigation of novel, cumulative or indirect risks

A new condition for assessing the clinical efficiency of a diagnostic test.

Science.gov (United States)

Bokhari, Ehsan; Hubert, Lawrence

2015-09-01

When prediction using a diagnostic test outperforms simple prediction using base rates, the test is said to be "clinically efficient," a term first introduced into the literature by Meehl and Rosen (1955) in Psychological Bulletin. This article provides three equivalent conditions for determining the clinical efficiency of a diagnostic test: (a) Meehl-Rosen (Meehl & Rosen, 1955); (b) Dawes (Dawes, 1962); and (c) the Bokhari-Hubert condition, introduced here for the first time. Clinical efficiency is then generalized to situations where misclassification costs are considered unequal (for example, false negatives are more costly than false positives). As an illustration, the clinical efficiency of an actuarial device for predicting violent and dangerous behavior is examined that was developed as part of the MacArthur Violence Risk Assessment Study. (c) 2015 APA, all rights reserved.

Assessing the efficiency position sensitive gaseous X-rays detectors

International Nuclear Information System (INIS)

Almeida, Gevaldo L. de; Souza, Maria Ines Silvani; Lopes, Ricardo T.

2009-01-01

Full text: The efficiency of gaseous X-ray detectors can be evaluated from tabulated data, but this approach assumes that the whole detector volume is permeated by the electrostatic field produced by the anode-cathode. Indeed, the usual detectors are comprised by a cylindrical hull acting as cathode containing a wire at its axis as anode, a configuration which foods the space between them with the electrostatic field. Some specially designed detectors, however, as Position Sensitive Detectors, contain regions which are not submitted to the electrostatic field, and hence, their efficiency could not be assessed from the tabulated data. Direct measurements of this efficiency would require a mono-chromator or set of pure mono-energetic X-rays sources. As only very few of them are really mono-energetic, the detector response to a given energy would be spoiled by to the concomitant contribution of other energies. Yet, the information would not be completely lost, but only concealed due to the convolution carried out by the detector. Therefore, a proper unfolding would be capable to recover the information, yielding the individual detector efficiency for each of the contributing energies. The degraded information is retrieved in this work through a proper mathematical unfolding of the detector response, when exposed to Bremsstrahlung spectra from an X-ray tube submitted to different voltages. For this purpose, Lorentzian functions have been fitted to these spectra - obtained with a NaI(Tl) spectrometer - in order to characterize them with proper parameters. The mathematical convolution of these functions with a theoretical detector efficiency curve yields, after integration, values which, confronted with those experimentally measured, allow the determination of the parameters of the efficiency curve. As some parameters of this curve are well known, it is possible to represent it by proper functions. For argon-filled detectors, for instance, this efficiency has a

The assessment of risk management system’s economic efficiency in retail banking

OpenAIRE

Cvilikas, Aurelijus; Paužuolis, Vaidas

2014-01-01

The banking risk management is always a relevant topic in financial sector’s academic literature, but the detailed analysis of current studies showed that there is a lack of studies in risk management’s economic efficiency assessment in retail banking, where the risk management system’s administration cost may be a significant part of total credit institution’s cost. The scientific problem of this article is: how the economic efficiency of retail banking risk management system could be ...

Optimizing cost-efficiency in mean exposure assessment--cost functions reconsidered.

Science.gov (United States)

Mathiassen, Svend Erik; Bolin, Kristian

2011-05-21

Reliable exposure data is a vital concern in medical epidemiology and intervention studies. The present study addresses the needs of the medical researcher to spend monetary resources devoted to exposure assessment with an optimal cost-efficiency, i.e. obtain the best possible statistical performance at a specified budget. A few previous studies have suggested mathematical optimization procedures based on very simple cost models; this study extends the methodology to cover even non-linear cost scenarios. Statistical performance, i.e. efficiency, was assessed in terms of the precision of an exposure mean value, as determined in a hierarchical, nested measurement model with three stages. Total costs were assessed using a corresponding three-stage cost model, allowing costs at each stage to vary non-linearly with the number of measurements according to a power function. Using these models, procedures for identifying the optimally cost-efficient allocation of measurements under a constrained budget were developed, and applied on 225 scenarios combining different sizes of unit costs, cost function exponents, and exposure variance components. Explicit mathematical rules for identifying optimal allocation could be developed when cost functions were linear, while non-linear cost functions implied that parts of or the entire optimization procedure had to be carried out using numerical methods.For many of the 225 scenarios, the optimal strategy consisted in measuring on only one occasion from each of as many subjects as allowed by the budget. Significant deviations from this principle occurred if costs for recruiting subjects were large compared to costs for setting up measurement occasions, and, at the same time, the between-subjects to within-subject variance ratio was small. In these cases, non-linearities had a profound influence on the optimal allocation and on the eventual size of the exposure data set. The analysis procedures developed in the present study can be used

Assessment of photobiological safety of energy-efficiency urban lighting

Directory of Open Access Journals (Sweden)

Łukasz Stanisław Pierzchała

2018-02-01

Full Text Available Exceeding the safe threshold for exposure on high energy radiation (UV and blue light could cause the emergence of a number of diseases. Eyesight is particularly sensitive to excessive lighting. This paper presents the laboratory research on the assessment of the photobiological risk generated by the energy-efficiency urban lighting. The results show that LED lighting systems can be a source of radiation that significantly negatively affects the eyesight and could contribute to circadian rhythm disorders.

Outward Bound with Ayyappan: Work, Masculinity, and Self-Respect in a South Indian Pilgrimage Festival

Directory of Open Access Journals (Sweden)

Elizabeth (Liz Wilson

2016-06-01

Full Text Available The annual pilgrimage festival dedicated to the god Ayyappan has become immensely popular in the past sixty years. As many as fifty million pilgrims participate each year. This paper draws on interviews of pilgrims conducted in South India in 2012–2013. My fieldwork suggests that the increasing popularity of the event relates to the contemporary South Indian work environment, an environment in which traditional gender roles are being reshaped by the challenges posed by migration for work opportunities. Interviews of English-speaking pilgrims show that their interpretations of the pilgrimage festival highlight the complexities of manhood in a time of rapidly changing work roles for men and women. Specifically, my fieldwork demonstrates that pilgrims perceive Ayyappan as a source of aid for those who struggle to succeed as financial providers and heads of the family unit. Pilgrims anxious about the loss of traditional models of masculinity amidst rapid change find solace in the blessings the god Ayyappan yields.

The rationale for energy efficiency policy: Assessing the recognition of the multiple benefits of energy efficiency retrofit policy

International Nuclear Information System (INIS)

Kerr, Niall; Gouldson, Andy; Barrett, John

2017-01-01

The rationale for energy efficiency policy can be framed in terms of a variety of different benefits. This paper considers how different benefits have been used within the overall rationale for energy efficient retrofit policy in different contexts. We posit that different rationales may be used for the same policy response, and that the form of rationale used may affect the design, delivery or the level of policy support, with different rationales making it easier to account for different results. Considering retrofit policy in the contexts of the UK, Germany, New Zealand and Ireland, we characterise policy rationale in each case, assessing what the key perceived benefits have been, and whether they have changed over time. The analysis identifies some marked differences between cases with the recognition of benefits and the ensuing policy rationale resulting from a complex mix of political, social and economic influences. We find that recognition of multiple benefits may not equate with multiplied policy support, and instead it is more likely that different rationales will have relevance at different times, for different audiences. The findings highlight that, alongside evidence for policy, it is important to also consider how the overall rationale for policy is eventually framed. - Highlights: • Energy efficiency as a policy issue with perceived multiple benefits. • Assessment of the influence of different benefits on rationale for energy efficient retrofit policy. • How does the rationale for retrofit policy differ in different national policy contexts. • To what extent are the perceived multiple benefits of policy recognised. • What influence does eventual rationale for policy have on the policy implemented.

A Threefold Assessment of the Romanian Economy’s Eco-efficiency

Directory of Open Access Journals (Sweden)

Viorel Niţă

2012-12-01

Full Text Available The present paper assesses the ecological sustainability of the Romanian economy from three different angles. The first two applications use the economy's energy and material consumption as proxy for its overall environmental impact. The third assessment approach is a qualitative and context-based one: the main obstacles to and opportunities for incorporating sustainability-competitiveness synergies into the Romanian industrial firms' management are identified. In the period 2000-2007, GDP growth was an important contributor to the Romanian economy's eco-efficiency levels, while the material and energy consumption remained constant or even increased. The predominance of competitive advantages based on low labour costs, high potential of increasing labour productivity, deficient environmental and industrial policies, and lack of awareness in both business and policy environment as to the beneficial role of resource productivity increase constitute significant obstacles to adopting competitive sustainability strategies. Fortunately, the relatively low levels of eco-efficiency and eco-innovation in industry offer in fact a wide scope of still unexploited win-win solutions. On the basis of the results, further research directions are sketched and several desirable public policy actions for enhancing the ecological sustainability of the Romanian economy are put forward.

Evaluation on the Perception of the New Portable Set for Hajj Course (P.A.H.A.M) Based on Design Characteristics

Science.gov (United States)

Shahir Yahya, Mohd; Rahim, Abd Khalil Abd; Mohammad, Musli; Ibrahim, Mustaffa; Kadis, Ghazali

2017-08-01

This paper is about the perceptions of the pilgrims to the innovation of the portable training set for hajj course (P.A.H.A.M). The acronym P.A.H.A.M come from the Malay word “Praktikal Haji Mudahalih” as a tool in helping the hajj and umrah pilgrims to better understand the concept while doing the hajj and umrah practical. In Malaysia, one of the managing bodies of pilgrimage for Muslims in is Pilgrims Fund Board. It provides a series of courses every year to help in boosting the understanding of the pilgrims before leaving for the Holy Land. During the practical session, they will provide the replica model to help pilgrims to familiarise themselves with the actual situation in Mecca. However, the current replica model was built using an iron structure that is relatively heavy, not portable and embarks more cost of transportation and labour. Therefore, this paper discusses the perceptions of the pilgrims on the characteristics of Portable Training Set for Hajj Course (P.A.H.A.M) compared to the existing set in order to increase the understanding of pilgrims. A total of 53 samples of hajj and umrah pilgrims participated in this study consisted of the general public. From the data analysed using Statistical Software for Social Sciences (SPSS v19), the results of the survey showed that more than 90% of respondents agreed that this portable training set meets the characteristics such as easy to handle, more safety in crowd, portable, stability, light weight, suitable in-door and out-door activity, easy to clean, and more structured with average score 4.00 (agreed) and above. In conclusion, it is expected that this Portable Training Set for Hajj Course (P.A.H.A.M) can be used by Muslim’s communities in Malaysia particularly and Muslim countries in general to better understand the hajj and umrah activities before leaving to the Holy Land.

INTEGRAL ASSESSMENT OF EFFICIENCY OF A FLEET OF AGRICULTURAL MACHINERY AND TRACTORS

Directory of Open Access Journals (Sweden)

V. M. Korotchenya

2015-01-01

Full Text Available An indicator for an integral assessment of efficiency of a fleet of agricultural machinery and tractors is proposed. Its calculating consists in multiplying partial efficiencies together: technical and price efficiency of agricultural production, and eco-efficiency of a fleet of agricultural machinery and tractors. Using an axiomatic method, the concept of efficiency of fleet was studied within broader category of productivity and in wider scales - within agriculture. The most general and obvious statements according to which efficiency of machine and tractor fleet is considered as indirectly settlement size counted proceeding from efficiency of agricultural production, were accepted as axioms. In general, efficiency is a ratio between productivity of an object in question and that of the theoretical ideal or an object with maximum productivity efficiency of which is accepted equal to unity or 100%. Technical efficiency of agricultural production characterizes the ability of an agricultural sector to produce the technically maximum output of agricultural produce obtained from the available resources (land, labor, machines, etc.. Price efficiency evaluates the ability of an agricultural sector to produce output of agricultural produce with regard to employing the optimal mix of resources given their prices. Because the theoretical ideal does not exist, efficiency of an agricultural sector, e.g. in Russia and of its fleet of agricultural machinery and tractors, is measured against agriculture of another country with maximum productivity efficiency of which is accepted as equal to unity or 100 percent. The calculation can be made on the basis of the Data Envelopment Analysis method. It is possible to calculate price and economic efficiency of Russian agriculture (fleet of agricultural machinery and tractors due to use its domestic prices.

Definition and assessment of physical efficiency of students – basketball players

Directory of Open Access Journals (Sweden)

Kuzminchuk Artem

2016-04-01

Full Text Available Purpose: assess the level of physical efficiency of students – basketball players by using the Harvard step test. Material & Methods: the analysis of scientific-methodical literature, educational testing, pedagogical experiment, methods of mathematical statistics. For determination and assessment physical efficiency of students – basketball players used the Harvard step test. In pedagogical testing for assessing special performance was attended by 14 students – basketball players (n=14 men's teams of the Medical Institute of Sumy State University. Results: the analysis of scientific and technical literature showed gaps in training basketball players, namely, to improve the physical performance. Especially these problems are when basketball training sessions combine with study in higher educational institutions. The load that caused a combination of mental and physical labor is enough to affect on the performance, develop resistance to fatigue. Still need to look for approaches that can help in conditions of single 3-4 workouts per week to maintain a high level of physical capacity of basketball players. Conclusions: analyzing the test results of basketball team players at Medical Institute of Sumy State University, we can say that the level of physical performance is satisfactory and functional status is mediocre. Players need more regular training which includes special exercises with high intensity close to competitive conditions

Assessing the technical efficiency of health posts in rural Guatemala: a data envelopment analysis.

Science.gov (United States)

Hernández, Alison R; San Sebastián, Miguel

2014-01-01

Strengthening health service delivery to the rural poor is an important means of redressing inequities. Meso-level managers can help enhance efficiency in the utilization of existing resources through the application of practical tools to analyze routinely collected data reflecting inputs and outputs. This study aimed to assess the efficiency and change in productivity of health posts over two years in a rural department of Guatemala. Data envelopment analysis was used to measure health posts' technical efficiency and productivity change for 2008 and 2009. Input/output data were collected from the regional health office of Alta Verapaz for 34 health posts from the 19 districts comprising the health region. Technical efficiency varied widely across health posts, with mean scores of 0.78 (SD=0.24) and 0.75 (SD=0.21) in 2008 and 2009, respectively. Overall, productivity increased by 4%, though 47% of health posts experienced a decline in productivity. Results were combined on a bivariate plot to identify health posts at the high and low extremes of efficiency, which should be followed up to determine how and why their production processes are operating differently. Assessing efficiency using the data that are available at the meso-level can serve as a first step in strengthening performance. Further work is required to support managers in the routine application of efficiency analysis and putting the results to use in guiding efforts to improve service delivery and increase utilization.

Improving the relevance and efficiency of human exposure assessments within the process of regulatory risk assessment.

Science.gov (United States)

Money, Chris

2018-01-24

The process for undertaking exposure assessments varies dependent on its purpose. But for exposure assessments to be relevant and accurate, they are reliant on access to reliable information on key exposure determinants. Acquiring such information is seldom straightforward and can take significant time and resources. This articles examines how the application of tiered and targeted approaches to information acquisition, within the context of European human health risk assessments, can not only lead to improvements in the efficiency and effectiveness of the process but also in the confidence of stakeholders in its outputs. The article explores how the benefits might be further improved through the coordination of such activities, as well as those areas that represent barriers to wider international harmonisation.

Teledermatology: quality assessment by user satisfaction and clinical efficiency.

Science.gov (United States)

Klaz, Itay; Wohl, Yonit; Nathansohn, Nir; Yerushalmi, Nir; Sharvit, Sharon; Kochba, Ilan; Brenner, Sarah

2005-08-01

The Israel Defense Forces implemented a pilot teledermatology service in primary clinics. To assess user satisfaction and clinical short-term effectiveness of a computerized store and forward teledermatology service in urban and rural units. A multi-center prospective uncontrolled cohort pilot trial was conducted for a period of 6 months. Primary care physicians referred patients to a board-certified dermatologist using text email accompanied by digital photographs. Diagnosis, therapy and management were sent back to the referring PCP. Patients were asked to evaluate the level of the CSAFTD service, effect of the service on accessibility to dermatologists, respect for privacy, availability of drugs, health improvement and overall satisfaction. PCPs assessed the quality of the teledermatology consultations they received, the contribution to their knowledge, and their overall satisfaction. Tele-diagnosis alone was possible for 95% (n=413) of 435 CSAFTD referrals; 22% (n=95) of referrals also required face-to-face consultation, Satisfaction with CSAFTD was high among patients in both rural and urban clinics, with significantly higher scores in rural units. Rural patients rated the level of service, accessibility and overall satisfaction higher than did urban patients. PCPs were satisfied with the quality of the service and its contribution to their knowledge. Rural physicians rated level of service and overall satisfaction higher than did urban physicians. Tele-referrals were completed more efficiently than referral for face-to-face appointments. CSAFTD provided efficient, high quality medical service to rural and urban military clinics in the IDF.

Assessing the Level of Efficiency of The Stock Exchange of Mauritius ...

African Journals Online (AJOL)

This paper assesses the level of efficiency of SEM by using a sample the daily market returns for the period 1999 to 2004. The main tests conducted are Run test, Augmented Dicker Fuller test, KPSS test and Auto-correlation test. The results for all tests provide evidence that returns on the market do not follow a random walk.

Cold comfort at the Magh Mela: social identity processes and physical hardship.

Science.gov (United States)

Pandey, Kavita; Stevenson, Clifford; Shankar, Shail; Hopkins, Nicholas P; Reicher, Stephen D

2014-12-01

Humans inhabit environments that are both social and physical, and in this article we investigate if and how social identity processes shape the experience and negotiation of physically demanding environmental conditions. Specifically, we consider how severe cold can be interpreted and experienced in relation to group members' social identity. Our data comprise ethnographic observation and semi-structured interviews with pilgrims attending a month-long winter Hindu religious festival that is characterized by near-freezing conditions. The analysis explores (1) how pilgrims appraised the cold and how these appraisals were shaped by their identity as pilgrims; (2) how shared identity with other pilgrims led to forms of mutual support that made it easier to cope with the cold. Our findings therefore extend theorizing on social identity processes to highlight their relevance to physical as well as social conditions. © 2013 The British Psychological Society.

Eco-Efficiency Assessment and Food Security Potential of Home Gardening: A Case Study in Padua, Italy

Directory of Open Access Journals (Sweden)

Esther Sanyé-Mengual

2018-06-01

Full Text Available In the expanding urban agriculture phenomenon in Europe, home gardens are a traditional form that have kept agriculture within cities, even becoming crucial in certain historical periods (e.g., war periods. However, horticultural practices in home gardens can also have negative consequences. The goal of this paper is to assess the eco-efficiency of home gardens as a type of urban agriculture. To do so, a case study in Padua (Italy was evaluated following life cycle assessment and life cycle costing methods. A home garden of 30.6 m2 and 21 crop cycles were evaluated. The functional unit of the assessment was 1 kg of harvested fresh vegetable at the consumption point, and the ReCiPe method was employed for impact assessment. Environmental assessment indicated that organic fertilization, use of tap water, mineral fertilization and pesticides were the most contributing elements of the entire life cycle. Furthermore, the relevance of garden design and crop selection was a determinant in the eco-efficiency results. The assessed home garden could satisfy the food requirements of between 1 and 2 members of the household. Crop management and design recommendations are provided to improve eco-efficiency and food security potential of home gardens.

Pilgrimages of Teachers and Students of Ecclesiastical Academies to the Holy Land and the Holy Mt. Athos

Directory of Open Access Journals (Sweden)

Sukhova Nataliia

2010-12-01

Full Text Available The author deals with pilgrim trips to the Holy Places — the Holy Land and the Holy Mt. Athos, — which were undertaken by teachers and students of Russian orthodox ecclesiastical academies in 1870-1910. The article covers the cases of these pilgrim trips. The author analyzes the motivation of concrete pilgrims and the significance of trips for a Russian ecclesiastical school. Besides, the author pays attention to efforts of spiritually-educational community to find the importance of the Holy Places for theological and ecclesiastical-historical sciences.

Urban water metabolism efficiency assessment: integrated analysis of available and virtual water.

Science.gov (United States)

Huang, Chu-Long; Vause, Jonathan; Ma, Hwong-Wen; Yu, Chang-Ping

2013-05-01

Resolving the complex environmental problems of water pollution and shortage which occur during urbanization requires the systematic assessment of urban water metabolism efficiency (WME). While previous research has tended to focus on either available or virtual water metabolism, here we argue that the systematic problems arising during urbanization require an integrated assessment of available and virtual WME, using an indicator system based on material flow analysis (MFA) results. Future research should focus on the following areas: 1) analysis of available and virtual water flow patterns and processes through urban districts in different urbanization phases in years with varying amounts of rainfall, and their environmental effects; 2) based on the optimization of social, economic and environmental benefits, establishment of an indicator system for urban WME assessment using MFA results; 3) integrated assessment of available and virtual WME in districts with different urbanization levels, to facilitate study of the interactions between the natural and social water cycles; 4) analysis of mechanisms driving differences in WME between districts with different urbanization levels, and the selection of dominant social and economic driving indicators, especially those impacting water resource consumption. Combinations of these driving indicators could then be used to design efficient water resource metabolism solutions, and integrated management policies for reduced water consumption. Copyright © 2013 Elsevier B.V. All rights reserved.

Nutritional efficiency of alpha-ketoisocaproate relative to leucine, assessed isotopically

International Nuclear Information System (INIS)

Kang, C.W.; Walser, M.

1985-01-01

The efficiency of alpha-ketoisocaproate as a dietary substitute for leucine was assessed in rats by two techniques: first, the minimal dose of alpha-ketoisocaproate required, as a supplement to a leucine-free diet, to achieve a growth rate as great as animals receiving leucine was found to be between 2.2 and 4.4 times larger. Therefore the nutritional efficiency of alpha-ketoisocaproate lies between 0.23 and 0.46. Second, alpha-[1- 14 C]-ketoisocaproate and [ 3 H]leucine were administered orally and the ratio of 14 C/ 3 H incorporated into the leucine of whole-body protein and fibrin was measured. This ratio, divided by the ratio 14 C/ 3 H injected, was the same in fibrin as in whole-body protein and averaged 0.39. Thus both techniques yield the same value, within the error of measurement, for the relative nutritional efficiency of alpha-ketoisocaproate. The authors also found that alpha-ketoisocaproate feeding at varying dosage did not alter this ratio in whole-body protein, suggesting that neither wide variations in growth rate nor exposure for 10 days to alpha-ketoisocaproate alters the relative rates of utilization (or oxidation) of alpha-ketoisocaproate vs. leucine

Nutritional efficiency of alpha-ketoisocaproate relative to leucine, assessed isotopically

Energy Technology Data Exchange (ETDEWEB)

Kang, C.W.; Walser, M.

1985-10-01

The efficiency of alpha-ketoisocaproate as a dietary substitute for leucine was assessed in rats by two techniques: first, the minimal dose of alpha-ketoisocaproate required, as a supplement to a leucine-free diet, to achieve a growth rate as great as animals receiving leucine was found to be between 2.2 and 4.4 times larger. Therefore the nutritional efficiency of alpha-ketoisocaproate lies between 0.23 and 0.46. Second, alpha-(1- UC)-ketoisocaproate and (TH)leucine were administered orally and the ratio of UC/TH incorporated into the leucine of whole-body protein and fibrin was measured. This ratio, divided by the ratio UC/TH injected, was the same in fibrin as in whole-body protein and averaged 0.39. Thus both techniques yield the same value, within the error of measurement, for the relative nutritional efficiency of alpha-ketoisocaproate. The authors also found that alpha-ketoisocaproate feeding at varying dosage did not alter this ratio in whole-body protein, suggesting that neither wide variations in growth rate nor exposure for 10 days to alpha-ketoisocaproate alters the relative rates of utilization (or oxidation) of alpha-ketoisocaproate vs. leucine.

Establishing strategic energy assessment indicators for Zimbabwe: A key to improving electrical energy efficiency

Science.gov (United States)

Goto, Felix

In Zimbabwe, there is still very little realization of the potential of demand side management (DSM) to increase industrial energy efficiency. Without clear guidelines that indicate the most economic energy efficiency strategies to implement, it is difficult for industry to easily evaluate the benefits of energy assessments. This research focused on establishing and evaluating indicators that guide correct implementation of energy assessments into Zimbabwean industry. This quantitative and qualitative study used a theoretic approach to develop indicators that identified industrial subsectors that should be targeted for DSM interventions. This may bring about reduction in energy demand in high power consuming Zimbabwean industrial companies, which were compared with energy utility performances of similar industrial companies in countries located in other parts of the world. This research used pattern-matching, categorical aggregation, and stochastic frontier regression analysis for data analysis. In maximizing electrical efficiency, the implications of this study may be used by individual companies in Zimbabwe to perform energy efficiency self-diagnoses, operational efficiency evaluations, and capital resource justifications. From a societal perspective, this study may benefit Zimbabwe because it provides opportunities for the alleviation of both shortages in power supply and the capital constraints of building new generating capacity. This study will also benefit ordinary Zimbabweans by lowering energy costs and providing reliable power. This promotes sustainable economic growth and lowers the need for foreign currency to import power.

Customer system efficiency improvement assessment: Supply curves for transmission and distribution conservation options

Energy Technology Data Exchange (ETDEWEB)

Tepel, R.C.; Callaway, J.W.; De Steese, J.G.

1987-11-01

This report documents the results of Task 6 in the Customer System Efficiency Improvement (CSEI) Assessment Project. A principal objective of this project is to assess the potential for energy conservation in the transmission and distribution (TandD) systems of electric utilities in the BPA service area. The scope of this assessment covers BPA customers in the Pacific Northwest region and all non-federal TandD systems, including those that currently place no load on the BPA system. Supply curves were developed to describe the conservation resource potentially available from TandD-system efficiency improvements. These supply curves relate the levelized cost of upgrading existing equipment to the estimated amount of energy saved. Stated in this form, the resource represented by TandD loss reductions can be compared with other conservation options and regional electrical generation resources to determine the most cost-effective method of supplying power to the Pacific Northwest. The development of the supply curves required data acquisition and methodology development that are also described in this report. 11 refs., 11 figs., 16 tabs.

Does Work Time Flexibility Work? An Empirical Assessment of the Efficiency Effects for German Firms

OpenAIRE

Wolf, Elke; Beblo, Miriam

2004-01-01

In this paper we assess the impact of flexible work time schedules on firm efficiency using representative establishment data for Germany. Following the approach by Battese and Coelli (1995), we estimate a stochastic production frontier and the determinants of technical efficiency simultaneously. The innovation of our study is that we draw on technical efficiency instead of productivity to appraise the success of flexible working hours. The results indicate that while the use of work time sch...

Assessment of the efficiency of cognitive function of people over 65

Directory of Open Access Journals (Sweden)

Katarzyna Tomaszewska

2018-05-01

Full Text Available Demographic estimates for Poland indicate that the average life expectancy of the population will increase further over the next decades. Weakness of memory is a physiological phenomenon affecting about 60% of people over 65, whereas the prevalence of dementia in the population is estimated at 10-11%. Identification of people at high risk of developing dementia is becoming a significant medical and social problem. Cognitive impairment is one of the first symptoms of dementia. The Mini-Mental State Examination (MMSE is a screening method that allows initial assessment of cognitive performance. Correct diagnosis of symptoms, determining the health needs of seniors in all dimensions sets its further paths and optimal medical treatment. Aim of the paper: The aim of this paper is to assess the efficiency of cognitive function of people over 65. Material and methods: The analysis included 135 questionnaires of the Mini-Mental State Examination (MMSE and respondents’ particulars. Additionally, the functional efficiency of the subjects was assessed using the Barthel scale. The research was conducted among people over 65 in the Podkarpackie Voivodeship in 2017. For the purpose of this work, especially for verification of hypotheses, the following tests were used for questions on nominal scales: V Kramer (2x3, 4x5 tables etc., Phi (2x2 tables. Tb-Kendall or Tc tests were used for questions on ordinal scales. The statistical analysis was carried out using the SPSS program and all relationships were statistically significant when p

Eco-efficiency assessment in apple production and storage in the northeast of Portugal

OpenAIRE

Feliciano, Manuel; Maia, Filipe; Rodrigues, Filipe; Gonçalves, Artur

2014-01-01

Cost reduction, product quality, and customer demands have been pressing the agro-industrial sector to adopt more sustainable practices. Assessing the environmental performance of the food sector worldwide is crucial to reduce the environmental impact of agricultural and industrial practices. This study focus on the assessment of the eco-efficiency of the apple production and storage in the northeastern region of Portugal, one of the largest production regions, using a set of environmental in...

Assessment of accountability and safeguards efficiencies

International Nuclear Information System (INIS)

McCormick, N.J.; Erdmann, R.C.

1975-01-01

Accountability and safeguards problems fall into the class of problems of searches for an anomaly, which in this case happens to be either an undesired amount of special nuclear material (SNM) in a specimen or the person or parcel which possesses SNM which is being removed surreptitiously. In such searches, principles from information theory can be used to relate the relative efficiency of the search itself to the relative efficiency of the detector. Such correlations are examined and provide some insight into the improvement of the search potentially available from an altered detector efficiency. Example calculations are presented

Global Clustering Quality Coefficient Assessing the Efficiency of PCA Class Assignment

Directory of Open Access Journals (Sweden)

Mirela Praisler

2014-01-01

Full Text Available An essential factor influencing the efficiency of the predictive models built with principal component analysis (PCA is the quality of the data clustering revealed by the score plots. The sensitivity and selectivity of the class assignment are strongly influenced by the relative position of the clusters and by their dispersion. We are proposing a set of indicators inspired from analytical geometry that may be used for an objective quantitative assessment of the data clustering quality as well as a global clustering quality coefficient (GCQC that is a measure of the overall predictive power of the PCA models. The use of these indicators for evaluating the efficiency of the PCA class assignment is illustrated by a comparative study performed for the identification of the preprocessing function that is generating the most efficient PCA system screening for amphetamines based on their GC-FTIR spectra. The GCQC ranking of the tested feature weights is explained based on estimated density distributions and validated by using quadratic discriminant analysis (QDA.

The formation and development of corporate culture of learning organization: efficiency assessment

Directory of Open Access Journals (Sweden)

T. O. Tolstykh

2017-01-01

Full Text Available In modern conditions of digitalization of the economy, its integration with the policy society questions of formation and development of corporate culture of the learning organisation are of particular relevance. Digital transformation of business dictates the need for the emergence and development of learning organizations, creating and preserving knowledge. In this situation, the openness of issues of assessment of efficiency of processes of formation and development defines the importance of the proposed research. Corporate culture is regarded by most scholars as the most important internal resource of the organization, able to provide her with stability in a crisis and give impetus to the development and transition to qualitatively different levels of the life cycle. This position assumes that a strong corporate culture should be aimed at building a learning organization, able to quickly adapt to changes in the external and internal environment. This article examines the issue of assessment of efficiency of corporate culture; it is shown that in addition to the empirical, sociological methods and qualitative approach to evaluation, is acceptable investment approach. This option appears when you use the aggregate target-oriented and project management methods, which allows in a systematic manner to carry out the formation and development of corporate culture. The assessment should be subject to software development activities and (or development of the corporate culture of a learning organization. In evidence to draw conclusions on the example of agricultural companies, a calculation of the economic efficiency of the program of formation of corporate culture of a learning organization. Calculation of net discounted income, the net present value of the project, profitability index, project profitability, payback period. This confirms the social and economic effects of the proposed program on the formation of corporate culture of independent

Islam, Jews and Eastern Christianity in late medieval pilgrims’ guidebooks: some examples from the Franciscan Convent of Mount Sion

NARCIS (Netherlands)

Campopiano, M.

2012-01-01

The Holy Land was described, not just in the accounts of the pilgrims who visited the most sacred land of Christianity, but also in several compilations and collections of texts conceived as guidebooks for clerics and pilgrims. From the fourteenth century onwards, many of these collections are

Efficiency assessment of wind farms in China using two-stage data envelopment analysis

International Nuclear Information System (INIS)

Wu, Yunna; Hu, Yong; Xiao, Xinli; Mao, Chunyu

2016-01-01

Highlights: • The efficiency of China’s wind farms is assessed by data envelopment analysis. • Tobit model is used to analyze the impact of uncontrollable factors on efficiency. • Sensitivity analysis is conducted to verify the stability of evaluation results. • Efficiency levels of Chinese wind farms are relatively high in general. • Age and wind curtailment rate negatively affect the productive efficiency. - Abstract: China has been the world’s leader in wind power capacity due to the promotion of favorable policies. Given the rare research on the efficiency of China’s wind farms, this study analyzes the productive efficiency of 42 large-scale wind farms in China using a two-stage analysis. In the first stage, efficiency scores of wind farms are determined with data envelopment analysis and the sensitivity analysis is conducted to verify the robustness of efficiency calculation results. In the second stage, the Tobit regression is employed to explore the relationship between the efficiency scores and the environment variables that are beyond the control of wind farms. According to the results, all wind farms studied operate at an acceptable level. However, 50% of them overinvest in the installed capacity and about 48% have the electricity-saving potential. The most important factors affecting the efficiency of wind farms are the installed capacity and the wind power density. In addition, the age of the wind farm and the wind curtailment rate have a negative effect on productive efficiency, whereas the ownership of the wind farm has no significant effect. Findings from this study may be helpful for stakeholders in the wind industry to select wind power projects, optimize operational strategies and make related policies.

High-efficiency Gas Cogeneration – an Assessment of the Support Mechanism

Directory of Open Access Journals (Sweden)

Maciej Sołtysik

2015-09-01

Full Text Available The development of a single European energy market implies the need to harmonise national laws and the directions of the sector’s growth to EU determinants. One of these elements was the introduction of a system to support the development of high-efficiency cogeneration, including gas cogeneration. Several years of the mechanisms’ performance allows for analysis of the advisability and correctness of the support model format, and assessment of its impact on the sub-sector’s development and the cost of its operation. Against the background of the support system introduction origins, the paper presents results of volumetric and price analyses, trends, and assessment of the balance of property rights and of the mechanism’s effectiveness.

Efficiency assessment models of higher education institution staff activity

Directory of Open Access Journals (Sweden)

K. A. Dyusekeyev

2016-01-01

Full Text Available The paper substantiates the necessity of improvement of university staff incentive system under the conditions of competition in the field of higher education, the necessity to develop a separate model for the evaluation of the effectiveness of the department heads. The authors analysed the methods for assessing production function of units. The advantage of the application of the methods to assess the effectiveness of border economic structures in the field of higher education is shown. The choice of the data envelopment analysis method to solve the problem has proved. The model for evaluating of university departments activity on the basis of the DEAmethodology has developed. On the basis of operating in Russia, Kazakhstan and other countries universities staff pay systems the structure of the criteria system for university staff activity evaluation has been designed. For clarification and specification of the departments activity efficiency criteria a strategic map has been developed that allowed us to determine the input and output parameters of the model. DEA-methodology using takes into account a large number of input and output parameters, increases the assessment objectivity by excluding experts, receives interim data to identify the strengths and weaknesses of the evaluated object.

A preliminary assessment of financial stability, efficiency, health systems and health outcomes using performance-based contracts in Belize.

Science.gov (United States)

Bowser, Diana M; Figueroa, Ramon; Natiq, Laila; Okunogbe, Adeyemi

2013-01-01

Over the last 10 years, Belize has implemented a National Health Insurance (NHI) program that uses performance-based contracts with both public and private facilities to improve financial sustainability, efficiency and service provision. Data were collected at the facility, district and national levels in order to assess trends in financial sustainability, efficiency payments, year-end bonuses and health system and health outcomes. A difference-in-difference approach was used to assess the difference in technical efficiency between private and public facilities. The results show that per capita spending on services provided by the NHI program has decreased over the period 2006-2009 from BZ$177 to BZ$136. The private sector has achieved higher levels of technical efficiency, but lower percentages of efficiency and year-end bonus payments. Districts with contracts through the NHI program showed greater improvements in facility births, nurse density, reducing maternal mortality, diabetes deaths and morbidity from bronchitis, emphysema and asthma than districts without contracts over the period 2006-2010. This preliminary assessment of Belize's pay-for-performance system provides some positive results, however further research is needed to use the lessons learned from Belize to implement similar reforms in other systems.

STRUCTURE OF THE MARKET OF INNOVATIVE PRODUCTS: APPROACH TO ASSESSING THE IMPACT ON EFFICIENCY

Directory of Open Access Journals (Sweden)

Anna Elagina

2015-06-01

Full Text Available The formation of innovation policy innovative economy is impossible without an understanding of the conceptual basis of the efficiency of production of innovative products. In particular, determination of the influence of market structure on the possibility of expanded reproduction of innovative products. The article is devoted to consideration of existing in this field of research and definition of the limits of quantitative assessment of the influence of defects of market structures on efficiency.

Integrated assessment technology in management of competition efficiency in business corporations

Directory of Open Access Journals (Sweden)

Savel’eva Nadezhda

2017-01-01

Full Text Available To date, the banking sector is subsidized. the state co-finances players in the domestic banking sector against the background of reduced availability of foreign debt financing. on the one hand is an additional source of competitive advantages, on the other hand, the question is how commercial banks use their capabilities. In a fast growing sector of banking services, increased competition, rapid growth in the breadth and richness of banking service range it is necessary to use the entire arsenal of marketing tools that determine the competitiveness of services and effectiveness of company. The economic importance of technologies development for integrated assessment of competition efficiency is that banks have to be able to use different methods of competition for adaptation to ambient conditions changes and ensure competitive success. The article describes an integrated assessment approach to effectiveness of management of price and non-price competition in business corporations based on sample of banking market. The technology that proposed in article helps to identify the main target segments of consumers, investigate the influence and perception factors of price and non-price competition to the banking service consumers; to form the main ways and directions in management of competition efficiency; to evaluate the effectiveness of interventions.

[Assessment and comparison of hospital operating efficiency under different management systems].

Science.gov (United States)

2017-06-18

To assess and analyze the operation efficiency of 8 commission general public hospitals managed directly by National Health and Family Planning Commission and 8 municipal general hospitals managed directly by Beijing Municipal Administration of Hospitals in Beijing and to provide suggestions on improving service capacity and designing relevant health policy. Input and output data of 8 commission hospitals and 8 municipal hospitals were obtained from Beijing Direct-Reported Health Statistics data from 2011 to 2014. Data envelopment analysis was used as the hospital operation efficiency measurement tool. The CCR and BCC models were built to calculate technical efficiency (TE), pure technical efficiency (PTE), scale efficiency (SE) and the status of scale efficiency of 16 hospitals in 2011 and 2014; the Malmquist index model was built to analyze the total factor productivity change (TFPC), technological change (TC), technical efficiency change, pure technical efficiency change and scale efficiency change of the 16 hospitals from 2011 to 2014. In 2011, the TE, PTE and SE of the commission hospitals were higher than those of the municipal hospitals, and the TEs of the commission hospitals and the municipal hospitals were 0.918 and 0.873 respectively. In 2014, the TE, PTE and SE of commission hospitals were lower than those of the municipal hospitals, and the TE of the commission hospitals and the municipal hospitals were 0.906 and 0.951, respectively, which was contrary to the results in 2011. According to the Malmquist index model, the average of TFPC of the municipal hospitals was larger than that of the commission hospitals, the former increased 5.9% and the latter increased 2.8% per year; the average of TC was greater than the one in both the municipal hospitals and the commission hospitals, with a growth of 3.2% and 2.9% per year, respectively; the average growth of PTE in the commission hospitals was lower than that of the municipal hospitals, and the average

Efficient algorithms to assess component and gate importance in fault tree analysis

International Nuclear Information System (INIS)

Dutuit, Y.; Rauzy, A.

2001-01-01

One of the principal activities of risk assessment is either the ranking or the categorization of structures, systems and components with respect to their risk-significance or their safety-significance. Several measures, so-called importance factors, of such a significance have been proposed for the case where the support model is a fault tree. In this article, we show how binary decision diagrams can be use to assess efficiently a number of classical importance factors. This work completes the preliminary results obtained recently by Andrews and Sinnamon, and the authors. It deals also with the concept of joint reliability importance

Resource efficiency of urban sanitation systems. A comparative assessment using material and energy flow analysis

Energy Technology Data Exchange (ETDEWEB)

Meinzinger, Franziska

2010-07-01

Within the framework of sustainable development it is important to find ways of reducing natural resource consumption and to change towards closed-loop management. As in many other spheres increased resource efficiency has also become an important issue in sanitation. Particularly nutrient recovery for agriculture, increased energy-efficiency and saving of natural water resources, can make a contribution to more resource efficient sanitation systems. To assess the resource efficiency of alternative developments a systems perspective is required. The present study applies a combined cost, energy and material flow analysis (ceMFA) as a system analysis method to assess the resource efficiency of urban sanitation systems. This includes the discussion of relevant criteria and assessment methods. The main focus of this thesis is the comparative assessment of different systems, based on two case studies; Hamburg in Germany and Arba Minch in Ethiopia. A range of possible system developments including source separation (e.g. diversion of urine or blackwater) is defined and compared with the current situation as a reference system. The assessment is carried out using computer simulations based on model equations. The model equations not only integrate mass and nutrient flows, but also the energy and cost balances of the different systems. In order to assess the impact of different assumptions and calculation parameters, sensitivity analyses and parameter variations complete the calculations. Based on the simulations, following general conclusions can be drawn: None of the systems show an overall benefit with regard to all investigated criteria, namely nutrients, energy, water and costs. Yet, the results of the system analysis can be used as basis for decision making if a case-related weighting is introduced. The systems show varying potential for the recovery of nutrients from (source separated) wastewater flows. For the case study of Hamburg up to 29% of the mineral

Dynamics of the Cult of Sheik Hussein of Bale, Ethiopia: Its Course ...

African Journals Online (AJOL)

It has immense potential for tourism that fascinates even the pilgrims, involving tour of scenic landscapes, famous shrines and singing in honor of the saint and Allah. However, due to the proliferation of extremist teachings of the Salafists and Wahabbists, attacks on pilgrims and marginalization of adherents have been ...

Winners in the urban champions league – A performance assessment of Japanese cities by means of dynamic and super-efficient DEA

Directory of Open Access Journals (Sweden)

Soushi Suzuki

2018-04-01

Full Text Available This paper aims to provide an advanced dynamic efficiency assessment methodology for city performance strategies in Japan, based on an extended and super-efficient Data Envelopment Analysis (DEA. The use of this novel efficiency-improving approach originates from earlier research based on the so-called Distance Friction Minimisation (DFM method. In the present study we develop a new multi-period model from a blend of a Target-Oriented (TO DFM model including a dynamic approach. This new model is able to present a more realistic efficiency improvement projection comprising a dynamic system of target-settings to achieve a target improvement level so as to programme more realistic policy actions. The above-mentioned Dynamic TO-DFM model will be applied to and tested for a multi-dimensional efficiency assessment of several large Japanese cities. In this study, we consider due to comparative data limitations, two inputs (population and city budget and two outputs (GDP and tax revenues. Based on these items, this study assesses the relative economic performance of 16 Japanese big cities by means of the above described, extended super-efficient DEA model. Finally, we present an efficiency improvement programme based on the Dynamic TO-DFM model for enhancing the position of inefficient cites. Keywords: Data Envelopment Analysis (DEA, Distance Friction Minimization (DFM, super-efficiency, Target-oriented (TO model, Dynamic DEA model, performance assessment, Japanese cities

Evaluating Value Chain Development Programs: Assessing Effectiveness, Efficiency, and Equity Effects of Contract Choice

NARCIS (Netherlands)

Ruben, R.

2015-01-01

Provides insights regarding the possible procedures for assessing welfare, efficiency, and equity effects of value chain development (VCD) programs, taking advantage of available analytical tools derived from impact analysis, transaction cost theory, and contract choice approaches and briefly

Accountability feedback assessments for improving efficiency of nuclear regulatory institutions

International Nuclear Information System (INIS)

Lavarenne, Jean; Shwageraus, Eugene; Weightman, Michael

2016-01-01

The Fukushima-Daiichi Accident demonstrated the need of assessing and strengthening institutions involved in nuclear safety, including the accountability of regulators. There are a few problems hindering the path towards a greater understanding of accountability systems, the ensemble of mechanisms holding to account the nuclear regulator on behalf of the public. There is no consensus on what it should deliver and no systematic assessment method exists. This article proposes a method of assessing institutions based on defence in depth concepts and inspired from risk-assessment techniques used for nuclear safety. As a first step in testing the proposal, it presents a simple Monte-Carlo simulation, illustrating some of the workings of the method of assessment and demonstrating the kind of results it will be able to supply. This on-going work will assist policy-makers take better informed decisions about the size, structure and organisation of a nuclear regulator and the cost-effective funding of its accountability system. It will assist in striking a balance between efficiency and resilience of regulatory decision-making processes. It will also promote the involvement of stakeholders and allow them to have a more meaningful impact on regulatory decisions, thereby enhancing the robustness of the regulatory system and potentially trust and confidence. - Highlights: •A general introduction to regulatory accountability is given. •A definition of an effective accountability system is proposed. •A method to assess accountability systems is proposed. •A simplified simulation of a regulatory system demonstrates the method’s capabilities.

Integrated AHP and network DEA for assessing the efficiency of Iranian handmade carpet industry

Directory of Open Access Journals (Sweden)

Azadeh Omid

2015-09-01

Full Text Available Data envelopment analysis (DEA is a method for measuring the efficiency of peer decision making units (DMUs. Traditional DEA models deal with measurements of relative efficiency of DMUs regarding multiple-inputs vs. multiple-outputs. One of the drawbacks of these models is the neglect of intermediate products or linking activities. Recently, DEA has been extended to examine the efficiency of network structures, where there are lots of sub-processes that are linked with intermediate parameters. These intermediate parameters can be considered as the outputs of the first stage and simultaneously as the inputs for the second stage. In contrast to the traditional DEA analysis, network DEA analysis aims to measure different sub-processes’ efficiencies in addition to the total efficiency. Lots of network DEA technique has been used recently, but none of them uses Analytic Hierarchy Process (AHP in network DEA for assessing a network’s efficiency. In this paper, AHP methodology is used for considering the importance of each sub-process and network DEA is used for measuring total and partial efficiencies based on the importance of each department measured from AHP methodology. In this regard, the case of Iranian Handmade Carpet Industry (IHCI is used.

Energy conservation assessment of fixed-asset investment projects: An attempt to improve energy efficiency in China

International Nuclear Information System (INIS)

Hu Yuan

2012-01-01

Fast economic growth in China has generated energy and environmental problems. Fixed-asset investments have contributed significantly to energy consumption. In China, an energy conservation assessment (ECA), a mechanism similar to the existing environmental impact assessment (EIA), has been applied to improve the energy efficiency of new fixed-asset investment projects. In this paper the origin and development of the ECA system is analyzed and the major features of ECA are discussed. To identify the success and failure of the ECA system, case studies are analyzed and comparison between ECA and EIA, which has been used in China for over 30 years, is made. Based on the analysis, recommendations are provided for the improvement of the ECA system in China. Despite the ECA system only being established for a relatively short time, it has clearly achieved significant success. With further efforts it could play an important role in achieving the goals of improving China’s energy efficiency and reducing green house gas emissions. - Highlights: ► We examine origin and development of energy conservation assessment (ECA) in China. ► ECA has great potential in energy efficiency improvement and GHGs reduction. ► Compared with EIA, ECA is still in its early stages. More efforts are needed. ► Improvements of legal system, assessment procedure, etc. are essential for next step.

Efficiency assessment of wastewater treatment plants: A data envelopment analysis approach integrating technical, economic, and environmental issues.

Science.gov (United States)

Castellet, Lledó; Molinos-Senante, María

2016-02-01

The assessment of the efficiency of wastewater treatment plants (WWTPs) is essential to compare their performance and consequently to identify the best operational practices that can contribute to the reduction of operational costs. Previous studies have evaluated the efficiency of WWTPs using conventional data envelopment analysis (DEA) models. Most of these studies have considered the operational costs of the WWTPs as inputs, while the pollutants removed from wastewater are treated as outputs. However, they have ignored the fact that each pollutant removed by a WWTP involves a different environmental impact. To overcome this limitation, this paper evaluates for the first time the efficiency of a sample of WWTPs by applying the weighted slacks-based measure model. It is a non-radial DEA model which allows assigning weights to the inputs and outputs according their importance. Thus, the assessment carried out integrates environmental issues with the traditional "techno-economic" efficiency assessment of WWTPs. Moreover, the potential economic savings for each cost item have been quantified at a plant level. It is illustrated that the WWTPs analyzed have significant room to save staff and energy costs. Several managerial implications to help WWTPs' operators make informed decisions were drawn from the methodology and empirical application carried out. Copyright © 2015 Elsevier Ltd. All rights reserved.

An Inquiry into the Efficiency of WhatsApp for Self- and Peer-Assessments of Oral Language Proficiency

Science.gov (United States)

Samaie, Mahmoud; Mansouri Nejad, Ali; Qaracholloo, Mahmoud

2018-01-01

Social networking applications such as WhatsApp have been extensively used for language research; however, they have rarely been applied for language assessment purposes. To explore the efficiency of WhatsApp for assessment purposes, 30 Iranian English learners doing self- and peer-assessments on WhatsApp are studied. The changes and the reasons…

Efficiency of cleaning and disinfection of surfaces: correlation between assessment methods

OpenAIRE

Frota, Oleci Pereira; Ferreira, Adriano Menis; Guerra, Odanir Garcia; Rigotti, Marcelo Alessandro; Andrade, Denise de; Borges, Najla Moreira Amaral; Almeida, Margarete Teresa Gottardo de

2017-01-01

ABSTRACT Objective: to assess the correlation among the ATP-bioluminescence assay, visual inspection and microbiological culture in monitoring the efficiency of cleaning and disinfection (C&D) of high-touch clinical surfaces (HTCS) in a walk-in emergency care unit. Method: a prospective and comparative study was carried out from March to June 2015, in which five HTCS were sampled before and after C&D by means of the three methods. The HTCS were considered dirty when dust, waste, humidity an...

An integrated DEA PCA numerical taxonomy approach for energy efficiency assessment and consumption optimization in energy intensive manufacturing sectors

International Nuclear Information System (INIS)

Azadeh, A.; Amalnick, M.S.; Ghaderi, S.F.; Asadzadeh, S.M.

2007-01-01

This paper introduces an integrated approach based on data envelopment analysis (DEA), principal component analysis (PCA) and numerical taxonomy (NT) for total energy efficiency assessment and optimization in energy intensive manufacturing sectors. Total energy efficiency assessment and optimization of the proposed approach considers structural indicators in addition conventional consumption and manufacturing sector output indicators. The validity of the DEA model is verified and validated by PCA and NT through Spearman correlation experiment. Moreover, the proposed approach uses the measure-specific super-efficiency DEA model for sensitivity analysis to determine the critical energy carriers. Four energy intensive manufacturing sectors are discussed in this paper: iron and steel, pulp and paper, petroleum refining and cement manufacturing sectors. To show superiority and applicability, the proposed approach has been applied to refinery sub-sectors of some OECD (Organization for Economic Cooperation and Development) countries. This study has several unique features which are: (1) a total approach which considers structural indicators in addition to conventional energy efficiency indicators; (2) a verification and validation mechanism for DEA by PCA and NT and (3) utilization of DEA for total energy efficiency assessment and consumption optimization of energy intensive manufacturing sectors

Assessment and optimisation of energy efficiency in heat treatment plants; Bewertung und Optimierung der Energieeffizienz von Thermoprozessanlagen

Energy Technology Data Exchange (ETDEWEB)

Krail, Juergen [Forschung Burgendland GmbH, Pinkafeld (Austria). Dept. Energie- und Umweltmanagement; Buchner, Klaus [Aichelin Ges.m.b.H., Moedling (Austria); Altena, Herwig [Aichelin Holding GmbH, Moedling (Austria)

2013-06-15

The last years are marked by heavily fluctuating energy costs and insecurity in the energy supply. Prognoses exhibit a dramatic difference between supply and demand of fossil fuel energy carriers in the years to come. Energy efficiency is one key to cover the future worldwide energy demand. In Austria and Germany process heat represents a considerable portion of total energy consumption. Targeted primary measurements and a consequent utilisation of waste heat in plants may lead to a significant improvement of plant efficiency and in consequence to a reduction of CO{sub 2}-emissions. By way of a gas-fired pusher type furnace for carburising internal and external efficiency increasing measures are demonstrated and their influences on the overall process are assessed. An increase of energy efficiency increasing measures are demonstrated and their influences on the overall process are assessed. An increase of energy efficiency up to 19 % and a reduction of CO{sub 2}-emissions of 547 t/y can be reached. However, a multidisciplinary cooperation of the plant supplier, energy engineer and operating company will be necessary for an optimum integration into a corporate energy concept. (orig.)

Efficient radiological assessment of the internal snapping hip syndrome

International Nuclear Information System (INIS)

Wunderbaldinger, P.; Bremer, C.; Matuszewski, L.; Marten, K.; Turetschek, K.; Rand, T.

2001-01-01

The aim of this study was to evaluate the diagnostic value/significance of various imaging techniques for demonstrating the underlying causative pathology of clinically suspected internal snapping hip syndrome. We intended to define the most efficient diagnostic imaging algorithm that leads to a specific definite therapy for this rare hip disorder. The imaging studies of 54 patients (43 women, 11 men, average age 58 years) with the clinical suspicion of internal snapping hip syndrome were compared for their diagnostic value/significance for finding the underlying pathology. Radiological workup included plain radiographs of the pelvis and hip joints (n=54), ultrasound (US) of the hip joints (n=29), computed tomography (CT) of the pelvis and proximal femur (n=17), and magnetic resonance imaging (MRI) of the pelvis/hip joint (n=21). In order to establish an efficient diagnostic algorithm we compared the diagnostic value of each imaging technique alone and in combination with the other methods. The underlying causative pathology could be established in 37% of patients (n=20) by the use of conventional radiographs alone and in 46% of the patients (n=25) by US alone, and in combination in 83% of the patients (n=45). By adding CT to the radiological workup, we established final diagnosis in 88% (in combination with X-ray; n=15/17) and 94% (together with X-ray and US; n=16/17) of the patients. Whenever MR imaging was used a causative pathology was found in all patients (100%; n=21). The most efficient radiological algorithm in the assessment of patients with internal snapping hip syndrome is the combination of plain radiography and US. MR imaging can be retained for unresolved and difficult cases. (orig.)

DEA (Data Envelopment Analysis) assessment of operational and environmental efficiencies on Japanese regional industries

International Nuclear Information System (INIS)

Goto, Mika; Otsuka, Akihiro; Sueyoshi, Toshiyuki

2014-01-01

A balance between industrial pollution and economic growth becomes a major policy issue to attain a sustainable society in the world. To discuss the problem from economics and business perspectives, this study proposes a new use of DEA (Data Envelopment Analysis) as a methodology for unified (operational and environmental) assessment. A unique feature of the proposed approach is that it separates outputs into desirable and undesirable categories. Such separation is important because energy industries usually produce both desirable and undesirable outputs. This study discusses how to unify the two types of outputs under natural and managerial disposability. The proposed DEA approach evaluates various organizations by the three efficiency measures such as OE (Operational Efficiency), UEN (Unified Efficiency under Natural disposability) and UENM (Unified Efficiency under Natural and Managerial disposability). An important feature of UENM is that it separates inputs into two categories and unifies them under the two disposability concepts in addition to the proposed output separation and unification. This study incorporates an amount of capital assets for technology innovation, as one of the two input group, into the measurement of UENM. Then, it compares UENM with the other two efficiency measures. This study is the first research effort in which DEA has an analytical capability to quantify the importance of investment on capital assets for technology innovation. To confirm the practicality of the proposed approach, this study applies the three efficiency measures to a data set regarding manufacturing and non-manufacturing industries of 47 prefectures in Japan. This study empirically confirms the validity of Porter hypothesis in Japanese manufacturing industries, so implying that environmental regulation has been effective for betterment on the performance of Japanese manufacturing industries. Another important finding is that the emission of greenhouse gases is a

Efficiency comparisons of fish sampling gears for a lentic ecosystem health assessments in Korea

Directory of Open Access Journals (Sweden)

Jeong-Ho Han

2016-12-01

Full Text Available The key objective of this study was to analyze the sampling efficiency of various fish sampling gears for a lentic ecosystem health assessment. A fish survey for the lentic ecosystem health assessment model was sampled twice from 30 reservoirs during 2008–2012. During the study, fishes of 81 species comprising 53,792 individuals were sampled from 30 reservoirs. A comparison of sampling gears showed that casting nets were the best sampling gear with high species richness (69 species, whereas minnow traps were the worst gear with low richness (16 species. Fish sampling efficiency, based on the number of individual catch per unit effort, was best in fyke nets (28,028 individuals and worst in minnow traps (352 individuals. When we compared trammel nets and kick nets versus fyke nets and casting nets, the former were useful in terms of the number of fish individuals but not in terms of the number of fish species.

In vitro assessment of cutting efficiency and durability of zirconia removal diamond rotary instruments.

Science.gov (United States)

Kim, Joon-Soo; Bae, Ji-Hyeon; Yun, Mi-Jung; Huh, Jung-Bo

2017-06-01

Recently, zirconia removal diamond rotary instruments have become commercially available for efficient cutting of zirconia. However, research of cutting efficiency and the cutting characteristics of zirconia removal diamond rotary instruments is limited. The purpose of this in vitro study was to assess and compare the cutting efficiency, durability, and diamond rotary instrument wear pattern of zirconia diamond removal rotary instruments with those of conventional diamond rotary instruments. In addition, the surface characteristics of the cut zirconia were assessed. Block specimens of 3 mol% yttrium cation-doped tetragonal zirconia polycrystal were machined 10 times for 1 minute each using a high-speed handpiece with 6 types of diamond rotary instrument from 2 manufacturers at a constant force of 2 N (n=5). An electronic scale was used to measure the lost weight after each cut in order to evaluate the cutting efficiency. Field emission scanning electron microscopy was used to evaluate diamond rotary instrument wear patterns and machined zirconia block surface characteristics. Data were statistically analyzed using the Kruskal-Wallis test, followed by the Mann-Whitney U test (α=.05). Zirconia removal fine grit diamond rotary instruments showed cutting efficiency that was reduced compared with conventional fine grit diamond rotary instruments. Diamond grit fracture was the most dominant diamond rotary instrument wear pattern in all groups. All machined zirconia surfaces were primarily subjected to plastic deformation, which is evidence of ductile cutting. Zirconia blocks machined with zirconia removal fine grit diamond rotary instruments showed the least incidence of surface flaws. Although zirconia removal diamond rotary instruments did not show improved cutting efficiency compared with conventional diamond rotary instruments, the machined zirconia surface showed smoother furrows of plastic deformation and fewer surface flaws. Copyright © 2016 Editorial Council

Theoretical and observational assessments of flare efficiencies

International Nuclear Information System (INIS)

Leahey, D.M.; Preston, K.; Strosher, M.

2000-01-01

During the processing of hydrocarbon materials, gaseous wastes are flared in an effort to completely burn the waste material and therefore leave behind very little by-products. Complete combustion, however is rarely successful because entrainment of air into the region of combusting gases restricts flame sizes to less than optimum values. The resulting flames are often too small to dissipate the amount of heat associated with complete (100 per cent) combustion efficiency. Flaring, therefore, often results in emissions of gases with more complex molecular structures than just carbon dioxide and water. Polycyclic aromatic hydrocarbons and volatile organic compounds which are indicative of incomplete combustion are often associated with flaring. This theoretical study of flame efficiencies was based on the knowledge of the full range of chemical reactions and associated kinetics. In this study, equations developed by Leahey and Schroeder were used to estimate flame lengths, areas and volumes as functions of flare stack exit velocity, stoichiometric mixing ratio and wind speed. This was followed by an estimate of heats released as part of the combustion process. This was derived from the knowledge of the flame dimensions together with an assumed flame temperature of 1200 K. Combustion efficiencies were then obtained by taking the ratio of estimated actual heat release values to those associated with complete combustion. It was concluded that combustion efficiency decreases significantly with wind speed increases from 1 to 6 m/s. After that initial increase, combustion efficiencies level off at values between 10 to 15 per cent. Propane and ethane were found to burn more efficiently than methane or hydrogen sulfide. 24 refs., 4 tabs., 1 fig., 1 append

Phosphorus Use Efficiency by Brazilian Common Bean Genotypes Assessed by the {sup 32}P Dilution Technique

Energy Technology Data Exchange (ETDEWEB)

Franzini, V. I. [Brazilian Agricultural Research Corporation, EMBRAPA-Amazonia Oriental, Belem, PA (Brazil); Muraoka, T. [Center for Nuclear Energy in Agriculture, University of Sao Paulo, Piracicaba, SP (Brazil); Adu-Gyamfi, J. J [International Atomic Energy Agency, Vienna (Austria); Lynch, J. P. [Pennsylvania State University, University Park, PA (United States)

2013-11-15

The objectives of this work were to identify the most efficient common bean (Phaseolus vulgaris L.) genotypes on phosphorus (P) utilization, and verify if P from the seed affects the classification of common bean genotypes on P uptake efficiency when the {sup 32}P isotopic dilution technique is used. The experiment was conducted in a greenhouse, and plants were grown in pots with surface samples of a dystrophic Typic Haplustox. The treatments consisted of 50 common bean genotypes and two standard plant species, efficient or inefficient in P uptake. The results were assessed through correlation and cluster analysis (multivariate). Sangue de Boi, Rosinha, Thayu, Grafite, Horizonte, Pioneiro and Jalo Precoce common bean genotypes were the most efficient on P uptake, and Carioca 80, CNF 10, Perola, IAPAR 31, Roxao EEP, Apore, Pioneiro, Pontal, Timbo and Ruda were the most efficient in P utilization. The P derived from seed influences the identification of common bean genotypes for P uptake efficiency. (author)

Super-Efficient Refrigerator Program (SERP) evaluation volume 2: Preliminary impact and market transformation assessment

Energy Technology Data Exchange (ETDEWEB)

Lee, A.D.; Conger, R.L.

1996-08-01

The Super Efficient Refrigerator Program (SERP) is a collaborative utility program intended to transform the market for energy-efficient and environmentally friendly refrigerators. It is one of the first examples of a large-scale {open_quotes}market transformation{close_quotes} energy efficiency program. This report documents the preliminary impact and market transformation evaluation of SERP ({open_quotes}the Program{close_quotes}). Pacific Northwest National Laboratory (PNNL) conducted this evaluation for the U.S. Department of Energy. This study focuses on the preliminary impact evaluation and market transformation assessment, but also presents limited process evaluation information. It is based on interviews with refrigerator dealers and manufacturers, interviews with utility participants, industry data, and information from the Program administrators. Results from this study complement those from prior process evaluation also conducted by PNNL. 42 refs., 5 figs., 4 tabs.

Efficiency in Assessment: Can Trained Student Interns Rate Essays as Well as Faculty Members?

Science.gov (United States)

Cole, Tracy L.; Cochran, Loretta F.; Troboy, L. Kim; Roach, David W.

2012-01-01

What are the most efficient and effective methods in measuring outcomes for assurance of learning in higher education? This study examines the merits of outsourcing part of the assessment workload by comparing ratings completed by trained student interns to ratings completed by faculty. Faculty evaluation of students' written work samples provides…

Focus maps: a means of prioritizing data collection for efficient geo-risk assessment

Directory of Open Access Journals (Sweden)

Massimiliano Pittore

2015-04-01

Full Text Available  Efficient Disaster Risk Reduction (DRR management constantly calls upon high-quality information to be collected or updated for vulnerability monitoring and risk assessment. This process is often resource- and time-intensive, which many economically developing states (including most Central Asian countries can seldom afford. In this paper, we introduce the concept of focus maps as a useful tool to quantify the spatial probability of sampling. Focus maps allow for a data collection prioritization scheme to be put in place, enabling the realization of optimized spatial sampling which assigns a higher priority to locations where the need for high-quality information is greater. In practice, smaller samples can be drawn with the same (or better resulting accuracy of the estimates, resulting in a more efficient use of time and resources. The factors that affect such a spatial sampling scheme include the usual components of risk assessment (hazard, exposure, vulnerability where available, as well as other potentially critical factors, such as the extent and quality of previously collected data. The practical application of the proposed approach to the case of Central Asia will be exemplified and discussed.

The MARINA Risk Assessment Strategy: A Flexible Strategy for Efficient Information Collection and Risk Assessment of Nanomaterials.

Science.gov (United States)

Bos, Peter M J; Gottardo, Stefania; Scott-Fordsmand, Janeck J; van Tongeren, Martie; Semenzin, Elena; Fernandes, Teresa F; Hristozov, Danail; Hund-Rinke, Kerstin; Hunt, Neil; Irfan, Muhammad-Adeel; Landsiedel, Robert; Peijnenburg, Willie J G M; Sánchez Jiménez, Araceli; van Kesteren, Petra C E; Oomen, Agnes G

2015-11-27

An engineered nanomaterial (ENM) may actually consist of a population of primary particles, aggregates and agglomerates of various sizes. Furthermore, their physico-chemical characteristics may change during the various life-cycle stages. It will probably not be feasible to test all varieties of all ENMs for possible health and environmental risks. There is therefore a need to further develop the approaches for risk assessment of ENMs. Within the EU FP7 project Managing Risks of Nanoparticles (MARINA) a two-phase risk assessment strategy has been developed. In Phase 1 (Problem framing) a base set of information is considered, relevant exposure scenarios (RESs) are identified and the scope for Phase 2 (Risk assessment) is established. The relevance of an RES is indicated by information on exposure, fate/kinetics and/or hazard; these three domains are included as separate pillars that contain specific tools. Phase 2 consists of an iterative process of risk characterization, identification of data needs and integrated collection and evaluation of data on the three domains, until sufficient information is obtained to conclude on possible risks in a RES. Only data are generated that are considered to be needed for the purpose of risk assessment. A fourth pillar, risk characterization, is defined and it contains risk assessment tools. This strategy describes a flexible and efficient approach for data collection and risk assessment which is essential to ensure safety of ENMs. Further developments are needed to provide guidance and make the MARINA Risk Assessment Strategy operational. Case studies will be needed to refine the strategy.

The MARINA Risk Assessment Strategy: A Flexible Strategy for Efficient Information Collection and Risk Assessment of Nanomaterials

Directory of Open Access Journals (Sweden)

Peter M. J. Bos

2015-11-01

Full Text Available An engineered nanomaterial (ENM may actually consist of a population of primary particles, aggregates and agglomerates of various sizes. Furthermore, their physico-chemical characteristics may change during the various life-cycle stages. It will probably not be feasible to test all varieties of all ENMs for possible health and environmental risks. There is therefore a need to further develop the approaches for risk assessment of ENMs. Within the EU FP7 project Managing Risks of Nanoparticles (MARINA a two-phase risk assessment strategy has been developed. In Phase 1 (Problem framing a base set of information is considered, relevant exposure scenarios (RESs are identified and the scope for Phase 2 (Risk assessment is established. The relevance of an RES is indicated by information on exposure, fate/kinetics and/or hazard; these three domains are included as separate pillars that contain specific tools. Phase 2 consists of an iterative process of risk characterization, identification of data needs and integrated collection and evaluation of data on the three domains, until sufficient information is obtained to conclude on possible risks in a RES. Only data are generated that are considered to be needed for the purpose of risk assessment. A fourth pillar, risk characterization, is defined and it contains risk assessment tools. This strategy describes a flexible and efficient approach for data collection and risk assessment which is essential to ensure safety of ENMs. Further developments are needed to provide guidance and make the MARINA Risk Assessment Strategy operational. Case studies will be needed to refine the strategy.

Durability and efficiency tests for direct methanol fuel cell's long-term performance assessment

International Nuclear Information System (INIS)

Yeh, Pulin; Chang, Chu Hsiang; Shih, Naichien; Yeh, Naichia

2016-01-01

This research assessed the long-term performance of direct methanol fuel cells. The experiment was performed at room temperature using 0.51 mol/L ∼0.651 mol/L methanol with a fuel consumption rate of 0.8 ± 0.1 cc/Wh at stack temperature of 60 °C–70 °C. DuPont Nafion115 proton exchange membrane was used as the base material of MEA (membrane electrode assembly), which is then examined via a series of processes that include I−V curve test, humidity cycle test, load cycle test, and hydrogen penetration test. The study employs membrane modification and cell structure adjustment approaches to reduce the methanol crossover in the cathode and identify the cell performance effect of the carbon paper gas diffusion layer. The test results indicated an efficiency of 25% can be achieved with a three-piece MEA assembly. According to the durability test, the stack power-generation efficiency has maintained at 15%–25% level. With such efficiency, the stack voltage output has been able to stay above 7.8-V for over 5000 h. This result is in line with industry standard. - Highlights: • Assess DMFC performance under non-optimal conditions for production readiness. • Output of 26-cell DMFC stack stays beyond 7.8v after 5000 operation hours. • Power-generation efficiency of 26-cell DMFC stack maintains between 15%–20%.

LightForce Photon-Pressure Collision Avoidance: Efficiency Assessment on an Entire Catalogue of Space Debris

Science.gov (United States)

Stupl, Jan Michael; Faber, Nicolas; Foster, Cyrus; Yang Yang, Fan; Levit, Creon

2013-01-01

The potential to perturb debris orbits using photon pressure from ground-based lasers has been confirmed by independent research teams. Two useful applications of this scheme are protecting space assets from impacts with debris and stabilizing the orbital debris environment, both relying on collision avoidance rather than de-orbiting debris. This paper presents the results of a new assessment method to analyze the efficiency of the concept for collision avoidance. Earlier research concluded that one ground based system consisting of a 10 kW class laser, directed by a 1.5 m telescope with adaptive optics, can prevent a significant fraction of debris-debris collisions in low Earth orbit. That research used in-track displacement to measure efficiency and restricted itself to an analysis of a limited number of objects. As orbit prediction error is dependent on debris object properties, a static displacement threshold should be complemented with another measure to assess the efficiency of the scheme. In this paper we present the results of an approach using probability of collision. Using a least-squares fitting method, we improve the quality of the original TLE catalogue in terms of state and co-state accuracy. We then calculate collision probabilities for all the objects in the catalogue. The conjunctions with the highest risk of collision are then engaged by a simulated network of laser ground stations. After those engagements, the perturbed orbits are used to re-assess the collision probability in a 20 minute window around the original conjunction. We then use different criteria to evaluate the utility of the laser-based collision avoidance scheme and assess the number of base-line ground stations needed to mitigate a significant number of high probability conjunctions. Finally, we also give an account how a laser ground station can be used for both orbit deflection and debris tracking.

Efficiency and hospital effectiveness in improving Hospital Consumer Assessment of Healthcare Providers and Systems ratings.

Science.gov (United States)

Al-Amin, Mona; Makarem, Suzanne C; Rosko, Michael

2016-01-01

Efficiency has emerged as a central goal to the operations of health care organizations. There are two competing perspectives on the relationship between efficiency and organizational performance. Some argue that organizational slack is a waste and that efficiency contributes to organizational performance, whereas others maintain that slack acts as a buffer, allowing organizations to adapt to environmental demands and contributing to organizational performance. As value-based purchasing becomes more prevalent, health care organizations are incented to become more efficient and, at the same time, improve their patients' experiences and outcomes. Unused slack resources might facilitate the timely implementation of these improvements. Building on previous research on organizational slack and inertia, we test whether efficiency and other organizational factors predict organizational effectiveness in improving Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) ratings. We rely on data from the American Hospital Association and HCAHPS. We estimate hospital cost-efficiency by Stochastic Frontier Analysis and use regression analysis to determine whether efficiency, competition, hospital size, and other organizational factors are significant predictors of hospital effectiveness. Our findings indicate that efficiency and hospital size have a significant negative association with organizational ability to improve HCAHPS ratings. Although achieving organizational efficiency is necessary for health care organizations, given the changes that are currently occurring in the U.S. health care system, it is important for health care managers to maintain a certain level of slack to respond to environmental demands and have the resources needed to improve their performance.

Improving urban district heating systems and assessing the efficiency of the energy usage therein

Science.gov (United States)

Orlov, M. E.; Sharapov, V. I.

2017-11-01

The report describes issues in connection with improving urban district heating systems from combined heat power plants (CHPs), to propose the ways for improving the reliability and the efficiency of the energy usage (often referred to as “energy efficiency”) in such systems. The main direction of such urban district heating systems improvement suggests transition to combined heating systems that include structural elements of both centralized and decentralized systems. Such systems provide the basic part of thermal power via highly efficient methods for extracting thermal power plants turbines steam, while peak loads are covered by decentralized peak thermal power sources to be mounted at consumers’ locations, with the peak sources being also reserve thermal power sources. The methodology was developed for assessing energy efficiency of the combined district heating systems, implemented as a computer software product capable of comparatively calculating saving on reference fuel for the system.

A GENERALIZED COEFFICIENT OF FRICTION FOR ASSESSING ENERGY EFFICIENCY OF BEARING SYSTEMS

OpenAIRE

Al-Bender, Farid

2011-01-01

Environmental impact estimations, often carried out in the framework of Life Cycle Assessment (LCA) on production machines and machine tools, show that a significant (if not the greatest) part of the environmental impact is related to the use-phase of the machine. A closer analysis reveals that the energy efficiency of the bearing systems, i.e. their friction loss, is the main culprit in this. Cost reduction and maintenance savings were the main motivations that initiated tribology as a s...

Eco-efficient production of spring barley in a changed climate: A Life Cycle Assessment including primary data from future climate scenarios

DEFF Research Database (Denmark)

Niero, Monia; Ingvordsen, Cathrine Heinz; Peltonen-Sainio, Pirjo

2015-01-01

The paper has two main objectives: (i) to assess the eco-efficiency of spring barley cultivation for malting in Denmark in a future changed climate (700 ppm [CO2] and +5 °C) through Life Cycle Assessment (LCA) and (ii) to compare alternative future cultivation scenarios, both excluding and includ......The paper has two main objectives: (i) to assess the eco-efficiency of spring barley cultivation for malting in Denmark in a future changed climate (700 ppm [CO2] and +5 °C) through Life Cycle Assessment (LCA) and (ii) to compare alternative future cultivation scenarios, both excluding...

Bottom-up Representation of Industrial Energy Efficiency Technologies in Integrated Assessment Models for the Cement Sector

Energy Technology Data Exchange (ETDEWEB)

Sathaye, J.; Xu, T.; Galitsky, C.

2010-08-15

Adoption of efficient end-use technologies is one of the key measures for reducing greenhouse gas (GHG) emissions. How to effectively analyze and manage the costs associated with GHG reductions becomes extremely important for the industry and policy makers around the world. Energy-climate (EC) models are often used for analyzing the costs of reducing GHG emissions for various emission-reduction measures, because an accurate estimation of these costs is critical for identifying and choosing optimal emission reduction measures, and for developing related policy options to accelerate market adoption and technology implementation. However, accuracies of assessing of GHG-emission reduction costs by taking into account the adoption of energy efficiency technologies will depend on how well these end-use technologies are represented in integrated assessment models (IAM) and other energy-climate models.

Meaningful and efficient? Enduring challenges to Aboriginal participation in environmental assessment

International Nuclear Information System (INIS)

Udofia, Aniekan; Noble, Bram; Poelzer, Greg

2017-01-01

This paper explores the underlying practice-based challenges to meaningful and efficient Aboriginal participation in environmental assessment (EA) - participation that provides meaningful opportunities for Aboriginal communities to shape EA, yet assures a degree of efficiency for project proponents who need to obtain EA approvals in a timely and financially viable manner. We do so based on an analysis of the EA policy community's experience with uranium exploration and mining in Saskatchewan, Canada. Many of the challenges to meaningful and efficient Aboriginal participation that emerged are multi-dimensional, often concerning participation processes, decision-making, and relationships. Although scholars have explored many of these issues and have proposed numerous solutions, challenges persist in practice. Several other issues also emerged from our study that have received limited attention, including the non-commitment to early and ongoing participation by smaller project proponents, and the EA exemption of exploration projects; the limited availability of information to project developers on local right holders and Aboriginal interests; expectations about the integration of traditional knowledge and land use in EA not aligning with the information that is available to proponents; confusion about who is responsible for initiating early participation and consultation processes; the lack of early relationship building with potentially affected communities, particularly by governments; and the lack of other viable avenues, outside EA, for Aboriginal communities to raise more strategic issues of concern that affect traditional lands and treaty rights.

An assessment of diagnostic efficiency by Taguchi/DEA methods.

Science.gov (United States)

Taner, Mehmet Tolga; Sezen, Bulent

2009-01-01

The aim of this paper is to propose a new, objective and consistent method for the calculation of the diagnostic efficiency in medical applications. In this study, a hybrid method of Taguchi and DEA is proposed. This method reflects the diversity of inputs and outputs by incorporating the stepwise application of sensitivity, specificity, leveling threshold, and efficiency score. A hypothetical case study is given which involves eight readers of X-ray films in clinical radiology. The selected pairs of sensitivity and specificity yielded two efficient readers. After super efficiency analysis, Reader 6 is found to be the most efficient reader. The paper presents a new, objective and consistent method for the calculation of the diagnostic efficiency in medical applications.

Vulnerability assessment as a missing part of efficient regulatory emergency preparedness system for nuclear critical infrastructure

International Nuclear Information System (INIS)

Kostadinov, V.

2007-01-01

One introduces a new model to assess the vulnerability of the nuclear infrastructure critical facilities. The new procedure of the vulnerability assessment (the VA) aims to reevaluate the efficiency of the present-day safeguards. On the basis of deeper insight into the VA new strategy and of the elaborated procedure to analyze the hazards for the nuclear power facilities one recommends the key safeguards affecting the damage magnitude [ru

A research needs assessment: Energy efficient alternatives to chlorofluorocarbons (CFCs). Final reprot

Energy Technology Data Exchange (ETDEWEB)

1993-06-01

An assessment of the state of the art in refrigeration and insulation technologies is carried out to evaluate the potential for efficient substitutes for CFCs and HCFCs to facilitate the transition to a CFC-free environment. Opportunities for improved efficiency in domestic refrigeration, building chillers, commercial refrigeration and industrial refrigeration are evaluated. Needs for alternate refrigerants, improved components, and/or alternate cycles are identified. A summary of on-going research is presented in each area, and the potential roles of industry and government are considered. The most promising approaches for refrigeration technology fall into these categories: (1) improved vapor compressor cycles with alternate fluids, (2) Stirling cycle development and (3) advances in absorption technology. A summary of on-going research into advanced insulation, focused on vacuum -- based insulation technology refrigeration is developed. Insulation applications considered include appliances, transport refrigeration, and buildings. Specific recommendations for a long-term R&D agenda are present. The potential benefits, research, general approach, and probability of success are addressed.

Assessing the Efficiency of Tax Incentives in the System for Managing Regional Finances

Directory of Open Access Journals (Sweden)

Igonina Lyudmila Lazarevna

2017-01-01

Full Text Available The paper analyzes existing techniques for assessing the effectiveness of tax incentives in the system for managing regional finances and reveals their advantages and disadvantages. It points out major conditions that determine the effectiveness of tax incentives at the regional level. The authors prove that assessing the effectiveness of tax incentives should focus, first, on identifying the relationship between the amounts of falling-out incomes and real economic benefits to the state and taxpayers that they entail; second, on determining the degree of correlation for this relationship; third, on adopting the decisions proceeding from the analysis of decisions concerning the extension of the incentive and its adjustment or possible abolition. The paper substantiates the conclusion that the effectiveness of tax incentives should be evaluated on the basis of three criteria: fiscal, economic and social. At that, the effectiveness of tax incentives at the regional level should be analyzed in several stages: calculation of budgetary, economic and social efficiency ratios; definition of the integral coefficient reflecting the total assessment of tax incentives efficiency; adoption of the decision about the appropriateness of introducing or further using the incentive, the decision being based on the calculations carried out previously. On the basis of the research the authors put forward a methodology for assessing the effectiveness of tax incentives based on the systematization of the totality of indicators in the context of structural determinants and calculation of the integral coefficient, which in contrast to existing techniques helps give an integrated assessment of the effectiveness of tax incentives at the subnational level, the assessment being structured by key blocks; the authors’ methodology also helps identify budgetary, economic and social implications of providing tax incentives. Moreover, the proposed methodology helps evaluate the

Quantitative assessment of aquatic impacts of power plants

Energy Technology Data Exchange (ETDEWEB)

McKenzie, D.H.; Arnold, E.M.; Skalski, J.R.; Fickeisen, D.H.; Baker, K.S.

1979-08-01

Progress is reported in a continuing study of the design and analysis of aquatic environmental monitoring programs for assessing the impacts of nuclear power plants. Analysis of data from Calvert Cliffs, Pilgrim, and San Onofre nuclear power plants confirmed the generic applicability of the control-treatment pairing design suggested by McKenzie et al. (1977). Substantial progress was made on the simulation model evaluation task. A process notebook was compiled in which each model equation was translated into a standardized notation. Individual model testing and evaluating was started. The Aquatic Generalized Environmental Impact Simulator (AGEIS) was developed and will be tested using data from Lake Keowee, South Carolina. Further work is required to test the various models and perfect AGEIS for impact analyses at actual power plant sites. Efforts on the hydrologic modeling task resulted in a compendium of models commonly applied to nuclear power plants and the application of two well-received hydrodynamic models to data from the Surry Nuclear Power Plant in Virginia. Conclusions from the study of these models indicate that slight inaccuracies of boundary data have little influence on mass conservation and accurate bathymetry data are necessary for conservation of mass through the model calculations. The hydrologic modeling task provides valuable reference information for model users and monitoring program designers.

Quantitative assessment of aquatic impacts of power plants

International Nuclear Information System (INIS)

McKenzie, D.H.; Arnold, E.M.; Skalski, J.R.; Fickeisen, D.H.; Baker, K.S.

1979-08-01

Progress is reported in a continuing study of the design and analysis of aquatic environmental monitoring programs for assessing the impacts of nuclear power plants. Analysis of data from Calvert Cliffs, Pilgrim, and San Onofre nuclear power plants confirmed the generic applicability of the control-treatment pairing design suggested by McKenzie et al. (1977). Substantial progress was made on the simulation model evaluation task. A process notebook was compiled in which each model equation was translated into a standardized notation. Individual model testing and evaluating was started. The Aquatic Generalized Environmental Impact Simulator (AGEIS) was developed and will be tested using data from Lake Keowee, South Carolina. Further work is required to test the various models and perfect AGEIS for impact analyses at actual power plant sites. Efforts on the hydrologic modeling task resulted in a compendium of models commonly applied to nuclear power plants and the application of two well-received hydrodynamic models to data from the Surry Nuclear Power Plant in Virginia. Conclusions from the study of these models indicate that slight inaccuracies of boundary data have little influence on mass conservation and accurate bathymetry data are necessary for conservation of mass through the model calculations. The hydrologic modeling task provides valuable reference information for model users and monitoring program designers

Sustainability Assessment: Energy Efficiency in Buildings at a Community University

Directory of Open Access Journals (Sweden)

Stephane Louise Bocasanta

2017-10-01

Full Text Available This research aims to analyze the degree of sustainability of a building in a community university (object of analysis, as regards its energy efficiency. Therefore, it seeks out to contribute to the literature, provide a basis for the application of SICOGEA system in other buildings and contribute to the consolidation of an effective and consistent environmental management system. The research can be classified, as to its technical procedures, as a case study. As to its objectives it is descriptive, with a qualitative approach. The literature on environmental management and sustainability assessment of buildings was used to support the research. As to the results found, the overall University sustainability rate was 48%, which can be classified as regular, that is, it aims to deal with the legislation only. Therefore, it is believed that the institution can make improvements to achieve a more efficient index. By taking into consideration the deficit items, the following is suggested: to introduce sustainable procurement; to strive for stamps and certifications; to avoid environmental fines and indemnity; and to implement environmental auditing. However, it is clarified that these are suggestions that should be taken into consideration along with financial matters and within the institution planning questions. The analysis of financial sustainability was considered good and, ideally, it will go on.

Ex-post assessment of China's industrial energy efficiency policies during the 11th Five-Year Plan

International Nuclear Information System (INIS)

Yu, Yuqing; Wang, Xiao; Li, Huimin; Qi, Ye; Tamura, Kentaro

2015-01-01

China implemented a package of policies during the 11th Five-Year Plan (2006–2010) to improve industrial energy efficiency. This assessment provides a methodology that establishes a causal relationship between policy implementation and energy conservation effects. To enhance the confidence in the research findings, this assessment applies two distinctive and independent approaches: one top-down and the other bottom-up. This assessment finds that industrial energy efficiency policies collectively achieved energy savings of 322 Mtce (9.4 EJ) against the baseline scenario. This accounted for 59% of the sector's total energy savings from 2006 to 2010. The remaining energy savings were realised through autonomous technology improvement (33%) and sector-level structural shift (8%). Correspondingly, cumulative avoided CO 2 emissions realised through energy efficiency policies amounted to 760 million tons. This assessment concludes that industrial energy efficiency policies were effective in realising energy conservation targets, but energy conservation effects were not achieved in a cost-effective way. Command and control measures were dominantly implemented, with economic incentives and informational measures taking a complementary role; while market based instruments did not play an important role. As China is planning on implementing a nationwide emissions trading scheme, special attention needs to be paid to policy interaction and coordination. - Highlights: • EE policies applied in the industry sector achieved energy savings of 322 Mtce. • Energy saving realized through EE policies accounted for 59% of the sector's total. • Avoided CO 2 emissions realized by EE policies amounted to 760 million tons. • Autonomous technology improvement accounted for 33% of the sector's total energy savings. • Sector-level structural shift accounted for the remaining 8% energy savings

Controlling for the use of extreme weights in bank efficiency assessments during the financial crisis

DEFF Research Database (Denmark)

Asmild, Mette; Zhu, Minyan

2016-01-01

We propose a method for bank efficiency assessment, based on weight restricted DEA, that limits banks’ abilities to use extreme weights, corresponding to extreme judgements of the risk adjusted prices on funding sources and assets. Based on a data set comprising the largest European banks during...... the financial crisis, we illustrate the impact of the proposed weight restrictions in two different efficiency models; one related to banks’ funding mix and one related to their asset mix. The results show that using a more balanced set of weights tend to reduce the estimated efficiency scores more for those...... banks which were bailed out during the crisis, which confirms the potential bias within standard DEA that does not control for extreme weights applied by highly risky banks. We discuss the use of the proposed method as a regulatory tool to constrain discretion when complying with regulatory capital...

Assessing wood use efficiency and greenhouse gas emissions of wood product cascading in the European Union

NARCIS (Netherlands)

Bais-Moleman, A.L.; Sikkema, Richard; Vis, Martijn; Reumerman, Patrick; Theurl, Michaela; Erb, Karl Heinz

2017-01-01

Cascading use of biomass is a recognized strategy contributing to an efficient development of the bioeconomy and for mitigating climate change. This study aims at assessing the potential of cascading use of woody biomass for reducing GHG (greenhouse gas) emissions and increasing the overall wood

The barriers to energy efficiency in China: Assessing household electricity savings and consumer behavior in Liaoning Province

International Nuclear Information System (INIS)

Feng Dianshu; Sovacool, Benjamin K.; Khuong Minh Vu

2010-01-01

This article investigates the barriers to energy efficiency at the residential sector within one province in China and explores patterns of household electricity consumption. The article presents the results of a survey questionnaire distributed to more than 600 households in Liaoning Province, field research at various Liaoning government agencies, and research interviews of Liaoning government officials to determine the efficacy of their energy efficiency efforts in China. It then investigates the extent that electricity consumers have taken advantage of energy efficiency opportunities relating to more efficient lights, water heaters, appliances, air-conditioners and heaters, and better energy-efficiency labels. The article also assesses the degree that electricity users have become more aware about electricity prices and their levels of consumption, and touches on the connection between rising levels of income and electricity use. It concludes by providing recommendations for how to improve efforts to promote conservation and reduce electricity load growth in Liaoning Province and beyond.

The barriers to energy efficiency in China. Assessing household electricity savings and consumer behavior in Liaoning Province

Energy Technology Data Exchange (ETDEWEB)

Dianshu, Feng; Sovacool, Benjamin K.; Minh Vu, Khuong [Lee Kuan Yew School of Public Policy, Centre on Asia and Globalisation, National University of Singapore, Oei Tiong Ham Building, 469C Bukit Timah Road, Singapore 259772 (Singapore)

2010-02-15

This article investigates the barriers to energy efficiency at the residential sector within one province in China and explores patterns of household electricity consumption. The article presents the results of a survey questionnaire distributed to more than 600 households in Liaoning Province, field research at various Liaoning government agencies, and research interviews of Liaoning government officials to determine the efficacy of their energy efficiency efforts in China. It then investigates the extent that electricity consumers have taken advantage of energy efficiency opportunities relating to more efficient lights, water heaters, appliances, air-conditioners and heaters, and better energy-efficiency labels. The article also assesses the degree that electricity users have become more aware about electricity prices and their levels of consumption, and touches on the connection between rising levels of income and electricity use. It concludes by providing recommendations for how to improve efforts to promote conservation and reduce electricity load growth in Liaoning Province and beyond. (author)

The barriers to energy efficiency in China: Assessing household electricity savings and consumer behavior in Liaoning Province

Energy Technology Data Exchange (ETDEWEB)

Feng Dianshu, E-mail: dianshu@nus.edu.s [Lee Kuan Yew School of Public Policy, Centre on Asia and Globalisation, National University of Singapore, Oei Tiong Ham Building, 469C Bukit Timah Road, Singapore 259772 (Singapore); Sovacool, Benjamin K., E-mail: bsovacool@nus.edu.s [Lee Kuan Yew School of Public Policy, Centre on Asia and Globalisation, National University of Singapore, Oei Tiong Ham Building, 469C Bukit Timah Road, Singapore 259772 (Singapore); Khuong Minh Vu, E-mail: sppkmv@nus.edu.s [Lee Kuan Yew School of Public Policy, Centre on Asia and Globalisation, National University of Singapore, Oei Tiong Ham Building, 469C Bukit Timah Road, Singapore 259772 (Singapore)

2010-02-15

This article investigates the barriers to energy efficiency at the residential sector within one province in China and explores patterns of household electricity consumption. The article presents the results of a survey questionnaire distributed to more than 600 households in Liaoning Province, field research at various Liaoning government agencies, and research interviews of Liaoning government officials to determine the efficacy of their energy efficiency efforts in China. It then investigates the extent that electricity consumers have taken advantage of energy efficiency opportunities relating to more efficient lights, water heaters, appliances, air-conditioners and heaters, and better energy-efficiency labels. The article also assesses the degree that electricity users have become more aware about electricity prices and their levels of consumption, and touches on the connection between rising levels of income and electricity use. It concludes by providing recommendations for how to improve efforts to promote conservation and reduce electricity load growth in Liaoning Province and beyond.

Potential pyrolysis pathway assessment for microalgae-based aviation fuel based on energy conversion efficiency and life cycle

International Nuclear Information System (INIS)

Guo, Fang; Wang, Xin; Yang, Xiaoyi

2017-01-01

Highlights: • High lipid content in microalgae increases energy conversion efficiency. • Indirect pathway has the highest mass ratio, energy ratio and energy efficiency. • The Isochrysis indirect pathway produces most kerosene component precursor. • The Isochrysis indirect pyrolysis pathway shows the best performance in LCA. - Abstract: Although the research of microalgae pyrolysis has been conducted for many years, there is a lack of investigations on energy efficiency and life cycle assessment. In this study, we investigated the biocrude yield and energy efficiency of direct pyrolysis, microalgae residue pyrolysis after lipid extraction (indirect pyrolysis), and different microalgae co-pyrolysis. This research also investigated the life cycle assessment of the three different pyrolysis pathways. A system boundary of Well-to-Wake (WTWa) was defined and included sub-process models, such as feedstock production, fuel production and pump-to-wheels (PTW) stages. The pathway of Isochrysis indirect pyrolysis shows the best performance in the mass ratio and energy ratio, produces the most kerosene component precursor, has the lowest WTWa total energy input, fossil fuel consumption and greenhouse gas emissions, and resultes in the best energy efficiency. All the evidence indicates that Isochrysis R2 pathway is a potential and optimal pyrolysis pathway to liquid biofuels. The mass ratio of pyrolysis biocrude is shown to be the decisive factor for different microalgae species. The sensitivity analysis results also indicates that the life cycle indicators are particularly sensitive to the mass ratio of pyrolysis biocrude for microalgae-based hydrotreated pyrolysis aviation fuel.

High self-perceived exercise exertion before bedtime is associated with greater objectively assessed sleep efficiency.

Science.gov (United States)

Brand, Serge; Kalak, Nadeem; Gerber, Markus; Kirov, Roumen; Pühse, Uwe; Holsboer-Trachsler, Edith

2014-09-01

To assess the association between self-perceived exercise exertion before bedtime and objectively measured sleep. Fifty-two regularly exercising young adults (mean age, 19.70 years; 54% females) underwent sleep electroencephalographic recordings 1.5 h after completing moderate to vigorous exercise in the evening. Before sleeping, participants answered questions regarding degree of exertion of the exercise undertaken. Greater self-perceived exertion before bedtime was associated with higher objectively assessed sleep efficiency (r = 0.69, P associated with more deep sleep, shortened sleep onset time, fewer awakenings after sleep onset, and shorter wake duration after sleep onset. Multiple linear regression analysis showed that objective sleep efficiency was predicted by increased exercise exertion, shortened sleep onset time, increased deep sleep, and decreased light sleep. Against expectations and general recommendations for sleep hygiene, high self-perceived exercise exertion before bedtime was associated with better sleep patterns in a sample of healthy young adults. Further studies should also focus on elderly adults and adults suffering from insomnia. Copyright © 2014 Elsevier B.V. All rights reserved.

Efficiency Assessment of the Power Supply System of an Industrial Enterprise Through the Assessment of the Modes of Electric Power Consumption

Science.gov (United States)

Miatishkin, Gennadii V.; Filinova, Anastasiia S.

2018-01-01

The paper reviews the terms of the rational consumption and distribution of the energy resources at an enterprise. The authors analyze the significance and the effect of the change of the profile of the energy consumption per hour by the enterprise. The text explores the factors influencing the discipline of the planned electricity and power consumption. The authors present a calculation of the weighted average deviations for consumers and the terms of their assessment. The authors make conclusions concerning the rationality of the means of defining the energy efficiency system through the assessment of the modes of electric energy consumption of an industrial enterprise.

Fabrication of an anthropomorphous phantom equipped with sensors to assess the efficient dose at workstations submitted to photonic fields: experimental study

International Nuclear Information System (INIS)

Darreon, J.

2009-12-01

The efficient dose is a reference value in radioprotection. It allows the harmfulness of ionizing radiations received by organs and tissues to be assessed. It is used on a legal basis but is not directly measurable. This research thesis reports a practical feasibility study of an anthropomorphous dummy or phantom equipped with sensors to assess the efficient dose from selective measurements. A first part deals with the dose measurement system, i.e. the sensors which will be embedded in the phantom. The second part, based on a simulation performed with a Monte Carlo code, reports the study of the efficient dose assessment accuracies for different irradiation configurations which could be obtained with this measurement instrument. The author shows that the estimation accuracy can be improved by modifying the sensor locations with respect to doses deposited in future reference phantoms of the International Commission on Radiological Protection

Efficiency assessment of a wind pumping system

International Nuclear Information System (INIS)

Lara, David D.; Merino, Gabriel G.; Pavez, Boris J.; Tapia, Juan A.

2011-01-01

The combined efficiency of the components determines overall system performance in electric wind pumping systems. We evaluated a system composed of a 3 kW wind generator feeding a battery bank of 48 V/880 Ah by means of a non-controlled 6-pulse rectifier. Connected to this battery bank was a 1.5 kW inverter that generated 220 V at 50 Hz, which powers a 1.1 kW single-phase electric pump. At the University of Concepcion, Chile, energy losses in each electrical component was determined using a data collection system configured to measure electrical variables in real time. The electrical power generated by the wind generator for different wind speeds averaged 38% lower than the power curve provided by the manufacturer. Electromechanical tests performed in a lab showed the operation efficiency of the electric generator of the wind turbine averaged 80%. This information, along with the electrical power output, and the wind velocity measured during field operation allowed us to determine the rotor's power coefficient C p , which had a maximum value of 35%. For the stored energy components measured data indicated that the rectifier, the battery bank, and the inverter operated with average efficiencies of 95%, 78% and 86% respectively. The combined component efficiencies showed a maximum of 17% of the wind energy would be available for water pumping. Since a large amount of wind energy was dissipated during the energy conversion process, new configurations should be analyzed that could avoid such losses in wind pumping systems.

Efficiency assessment of a wind pumping system

Energy Technology Data Exchange (ETDEWEB)

Lara, David D.; Merino, Gabriel G. [Department of Mechanization and Energy, University of Concepcion, Avenida Vicente Mendez 595, Chillan (Chile); Pavez, Boris J. [Department of Electrical Engineering, University of La Frontera, Casilla 54-D, Temuco (Chile); Tapia, Juan A. [Department of Electrical Engineering, University of Concepcion, Casilla 160-C, Concepcion (Chile)

2011-02-15

The combined efficiency of the components determines overall system performance in electric wind pumping systems. We evaluated a system composed of a 3 kW wind generator feeding a battery bank of 48 V/880 Ah by means of a non-controlled 6-pulse rectifier. Connected to this battery bank was a 1.5 kW inverter that generated 220 V at 50 Hz, which powers a 1.1 kW single-phase electric pump. At the University of Concepcion, Chile, energy losses in each electrical component was determined using a data collection system configured to measure electrical variables in real time. The electrical power generated by the wind generator for different wind speeds averaged 38% lower than the power curve provided by the manufacturer. Electromechanical tests performed in a lab showed the operation efficiency of the electric generator of the wind turbine averaged 80%. This information, along with the electrical power output, and the wind velocity measured during field operation allowed us to determine the rotor's power coefficient C{sub p}, which had a maximum value of 35%. For the stored energy components measured data indicated that the rectifier, the battery bank, and the inverter operated with average efficiencies of 95%, 78% and 86% respectively. The combined component efficiencies showed a maximum of 17% of the wind energy would be available for water pumping. Since a large amount of wind energy was dissipated during the energy conversion process, new configurations should be analyzed that could avoid such losses in wind pumping systems. (author)

Accuracy, precision, and economic efficiency for three methods of thrips (Thysanoptera: Thripidae) population density assessment.

Science.gov (United States)

Sutherland, Andrew M; Parrella, Michael P

2011-08-01

Western flower thrips, Frankliniella occidentalis (Pergande) (Thysanoptera: Thripidae), is a major horticultural pest and an important vector of plant viruses in many parts of the world. Methods for assessing thrips population density for pest management decision support are often inaccurate or imprecise due to thrips' positive thigmotaxis, small size, and naturally aggregated populations. Two established methods, flower tapping and an alcohol wash, were compared with a novel method, plant desiccation coupled with passive trapping, using accuracy, precision and economic efficiency as comparative variables. Observed accuracy was statistically similar and low (37.8-53.6%) for all three methods. Flower tapping was the least expensive method, in terms of person-hours, whereas the alcohol wash method was the most expensive. Precision, expressed by relative variation, depended on location within the greenhouse, location on greenhouse benches, and the sampling week, but it was generally highest for the flower tapping and desiccation methods. Economic efficiency, expressed by relative net precision, was highest for the flower tapping method and lowest for the alcohol wash method. Advantages and disadvantages are discussed for all three methods used. If relative density assessment methods such as these can all be assumed to accurately estimate a constant proportion of absolute density, then high precision becomes the methodological goal in terms of measuring insect population density, decision making for pest management, and pesticide efficacy assessments.

Eco-Efficiency Assessments as a Tool for Revealing the Environmental Improvement Potential of New Regulations

Directory of Open Access Journals (Sweden)

Ottar Michelsen

2010-01-01

Full Text Available Public regulations can result in improved environmental performance of products. In this paper eco-efficiency is used to assess the most likely outcome of potential new regulations. The paper presents a case study of furniture production in Norway where different scenarios for improving the environmental performance of the products are presented. Four regulatory options for imposing environmental improvements are assessed; (1 an introduction of a tax on emissions, (2 an increase of the tax on landfills, (3 an introduction of a tax on raw material consumption, and (4 introduction of take-back legislation.

Assessment of clean development mechanism potential of large-scale energy efficiency measures in heavy industries

International Nuclear Information System (INIS)

Hayashi, Daisuke; Krey, Matthias

2007-01-01

This paper assesses clean development mechanism (CDM) potential of large-scale energy efficiency measures in selected heavy industries (iron and steel, cement, aluminium, pulp and paper, and ammonia) taking India and Brazil as examples of CDM project host countries. We have chosen two criteria for identification of the CDM potential of each energy efficiency measure: (i) emission reductions volume (in CO 2 e) that can be expected from the measure and (ii) likelihood of the measure passing the additionality test of the CDM Executive Board (EB) when submitted as a proposed CDM project activity. The paper shows that the CDM potential of large-scale energy efficiency measures strongly depends on the project-specific and country-specific context. In particular, technologies for the iron and steel industry (coke dry quenching (CDQ), top pressure recovery turbine (TRT), and basic oxygen furnace (BOF) gas recovery), the aluminium industry (point feeder prebake (PFPB) smelter), and the pulp and paper industry (continuous digester technology) offer promising CDM potential

Improving efficiency assessments using additive data envelopment analysis models: an application to contrasting dairy farming systems

Directory of Open Access Journals (Sweden)

Andreas Diomedes Soteriades

2015-10-01

Full Text Available Applying holistic indicators to assess dairy farm efficiency is essential for sustainable milk production. Data Envelopment Analysis (DEA has been instrumental for the calculation of such indicators. However, ‘additive’ DEA models have been rarely used in dairy research. This study presented an additive model known as slacks-based measure (SBM of efficiency and its advantages over DEA models used in most past dairy studies. First, SBM incorporates undesirable outputs as actual outputs of the production process. Second, it identifies the main production factors causing inefficiency. Third, these factors can be ‘priced’ to estimate the cost of inefficiency. The value of SBM for efficiency analyses was demonstrated with a comparison of four contrasting dairy management systems in terms of technical and environmental efficiency. These systems were part of a multiple-year breeding and feeding systems experiment (two genetic lines: select vs. control; and two feeding strategies: high forage vs. low forage, where the latter involved a higher proportion of concentrated feeds where detailed data were collected to strict protocols. The select genetic herd was more technically and environmentally efficient than the control herd, regardless of feeding strategy. However, the efficiency performance of the select herd was more volatile from year to year than that of the control herd. Overall, technical and environmental efficiency were strongly and positively correlated, suggesting that when technically efficient, the four systems were also efficient in terms of undesirable output reduction. Detailed data such as those used in this study are increasingly becoming available for commercial herds through precision farming. Therefore, the methods presented in this study are growing in importance.

[Assessment of the efficiency of the auditory training in children with dyslalia and auditory processing disorders].

Science.gov (United States)

Włodarczyk, Elżbieta; Szkiełkowska, Agata; Skarżyński, Henryk; Piłka, Adam

2011-01-01

To assess effectiveness of the auditory training in children with dyslalia and central auditory processing disorders. Material consisted of 50 children aged 7-9-years-old. Children with articulation disorders stayed under long-term speech therapy care in the Auditory and Phoniatrics Clinic. All children were examined by a laryngologist and a phoniatrician. Assessment included tonal and impedance audiometry and speech therapists' and psychologist's consultations. Additionally, a set of electrophysiological examinations was performed - registration of N2, P2, N2, P2, P300 waves and psychoacoustic test of central auditory functions: FPT - frequency pattern test. Next children took part in the regular auditory training and attended speech therapy. Speech assessment followed treatment and therapy, again psychoacoustic tests were performed and P300 cortical potentials were recorded. After that statistical analyses were performed. Analyses revealed that application of auditory training in patients with dyslalia and other central auditory disorders is very efficient. Auditory training may be a very efficient therapy supporting speech therapy in children suffering from dyslalia coexisting with articulation and central auditory disorders and in children with educational problems of audiogenic origin. Copyright © 2011 Polish Otolaryngology Society. Published by Elsevier Urban & Partner (Poland). All rights reserved.

Preliminary Assessment of Detection Efficiency for the Geostationary Lightning Mapper Using Intercomparisons with Ground-Based Systems

Science.gov (United States)

Bateman, Monte; Mach, Douglas; Blakeslee, Richard J.; Koshak, William

2018-01-01

As part of the calibration/validation (cal/val) effort for the Geostationary Lightning Mapper (GLM) on GOES-16, we need to assess instrument performance (detection efficiency and accuracy). One major effort is to calculate the detection efficiency of GLM by comparing to multiple ground-based systems. These comparisons will be done pair-wise between GLM and each other source. A complication in this process is that the ground-based systems sense different properties of the lightning signal than does GLM (e.g., RF vs. optical). Also, each system has a different time and space resolution and accuracy. Preliminary results indicate that GLM is performing at or above its specification.

Mental health in mass gatherings

Directory of Open Access Journals (Sweden)

Shahbaz Ali Khan

2016-01-01

Full Text Available Background: Hajj pilgrimage, in Saudi Arabia, is one of the world's largest religious mass gatherings. We have similar mass gathering scenarios in India such as the Amarnath Yatra and Kumbh. A unique combination of physical, physiological, and psychological factors makes this pilgrimage a very stressful milieu. We studied the emergence of psychopathology and its determinants, in this adverse environment in mass gathering situation, in Indian pilgrims on Hajj 2016. Materials and Methods: This is a descriptive study analyzing the mental morbidity in 1.36 lakh Indian pilgrims during Hajj 2016, using SPSS software version 19. Results: Totally 182 patients reported psychological problems. Twenty-two patients (12% required admission. Twelve (6.8% pilgrims reported a past history of a mental illness. One hundred and sixty-five (93.2% patients never had any mental symptoms earlier in life. The most common illnesses seen were stress related (45.7% followed by psychosis (9.8%, insomnia (7.3%, and mood disorders (5.6%. The most common symptoms recorded were apprehension (45%, sleep (55%, anxiety (41%, and fear of being lost (27%. Psychotropics were prescribed for 46% of pilgrims. All patients completed their Hajj successfully and returned to India. Conclusions: Cumulative stress causes full spectrum of mental decompensation, and prompt healing is aided by simple nonpharmacological measures including social support and counseling in compatible sociolinguistic milieu.

Mental health in mass gatherings

Science.gov (United States)

Khan, Shahbaz Ali; Chauhan, V. S.; Timothy, A.; Kalpana, S.; Khanam, Shagufta

2016-01-01

Background: Hajj pilgrimage, in Saudi Arabia, is one of the world's largest religious mass gatherings. We have similar mass gathering scenarios in India such as the Amarnath Yatra and Kumbh. A unique combination of physical, physiological, and psychological factors makes this pilgrimage a very stressful milieu. We studied the emergence of psychopathology and its determinants, in this adverse environment in mass gathering situation, in Indian pilgrims on Hajj 2016. Materials and Methods: This is a descriptive study analyzing the mental morbidity in 1.36 lakh Indian pilgrims during Hajj 2016, using SPSS software version 19. Results: Totally 182 patients reported psychological problems. Twenty-two patients (12%) required admission. Twelve (6.8%) pilgrims reported a past history of a mental illness. One hundred and sixty-five (93.2%) patients never had any mental symptoms earlier in life. The most common illnesses seen were stress related (45.7%) followed by psychosis (9.8%), insomnia (7.3%), and mood disorders (5.6%). The most common symptoms recorded were apprehension (45%), sleep (55%), anxiety (41%), and fear of being lost (27%). Psychotropics were prescribed for 46% of pilgrims. All patients completed their Hajj successfully and returned to India. Conclusions: Cumulative stress causes full spectrum of mental decompensation, and prompt healing is aided by simple nonpharmacological measures including social support and counseling in compatible sociolinguistic milieu. PMID:28659703

Environmental impact efficiency of natural gas combined cycle power plants: A combined life cycle assessment and dynamic data envelopment analysis approach.

Science.gov (United States)

Martín-Gamboa, Mario; Iribarren, Diego; Dufour, Javier

2018-02-15

The energy sector is still dominated by the use of fossil resources. In particular, natural gas represents the third most consumed resource, being a significant source of electricity in many countries. Since electricity production in natural gas combined cycle (NGCC) plants provides some benefits with respect to other non-renewable technologies, it is often seen as a transitional solution towards a future low‑carbon power generation system. However, given the environmental profile and operational variability of NGCC power plants, their eco-efficiency assessment is required. In this respect, this article uses a novel combined Life Cycle Assessment (LCA) and dynamic Data Envelopment Analysis (DEA) approach in order to estimate -over the period 2010-2015- the environmental impact efficiencies of 20 NGCC power plants located in Spain. A three-step LCA+DEA method is applied, which involves data acquisition, calculation of environmental impacts through LCA, and the novel estimation of environmental impact efficiency (overall- and term-efficiency scores) through dynamic DEA. Although only 1 out of 20 NGCC power plants is found to be environmentally efficient, all plants show a relatively good environmental performance with overall eco-efficiency scores above 60%. Regarding individual periods, 2011 was -on average- the year with the highest environmental impact efficiency (95%), accounting for 5 efficient NGCC plants. In this respect, a link between high number of operating hours and high environmental impact efficiency is observed. Finally, preliminary environmental benchmarks are presented as an additional outcome in order to further support decision-makers in the path towards eco-efficiency in NGCC power plants. Copyright © 2017 Elsevier B.V. All rights reserved.

An Assessment Model for Energy Efficiency Program Planning in Electric Utilities: Case of the Pacific of Northwest U.S.A

Science.gov (United States)

Iskin, Ibrahim

Energy efficiency stands out with its potential to address a number of challenges that today's electric utilities face, including increasing and changing electricity demand, shrinking operating capacity, and decreasing system reliability and flexibility. Being the least cost and least risky alternative, the share of energy efficiency programs in utilities' energy portfolios has been on the rise since the 1980s, and their increasing importance is expected to continue in the future. Despite holding great promise, the ability to determine and invest in only the most promising program alternatives plays a key role in the successful use of energy efficiency as a utility-wide resource. This issue becomes even more significant considering the availability of a vast number of potential energy efficiency programs, the rapidly changing business environment, and the existence of multiple stakeholders. This dissertation introduces hierarchical decision modeling as the framework for energy efficiency program planning in electric utilities. The model focuses on the assessment of emerging energy efficiency programs and proposes to bridge the gap between technology screening and cost/benefit evaluation practices. This approach is expected to identify emerging technology alternatives which have the highest potential to pass cost/benefit ratio testing procedures and contribute to the effectiveness of decision practices in energy efficiency program planning. The model also incorporates rank order analysis and sensitivity analysis for testing the robustness of results from different stakeholder perspectives and future uncertainties in an attempt to enable more informed decision-making practices. The model was applied to the case of 13 high priority emerging energy efficiency program alternatives identified in the Pacific Northwest, U.S.A. The results of this study reveal that energy savings potential is the most important program management consideration in selecting emerging energy

Assessment of urban sustainability efficiency based on general data envelopment analysis: a case study of two cities in western and eastern China.

Science.gov (United States)

Yan, Yan; Shan, Peng; Wang, Chenxing; Quan, Yuan; Wu, Di; Zhao, Chunli; Wu, Gang; Deng, Hongbing

2017-04-01

Sustainable urban development focuses on enhancing urban well-being, while also balancing the demands of urban social and economic development, natural resource consumption, and environmental pollution. This work used general data envelopment analysis to assess the urban sustainability efficiency (USE) and sustainability potential (SP) in Lanzhou and Xiamen, two cities that are characteristic of urban areas in western and eastern China. The assessment indicator system included important natural and urban welfare factors as input and output indices, respectively. The results showed that overall urban sustainability efficiency increased in Lanzhou and Xiamen from 1985 to 2010, but that the sustainability of natural resources clearly decreased. The urban sustainability efficiency of Xiamen was higher than that of Lanzhou, and the sustainability potential of Xiamen was lower than that of Lanzhou; this indicates that Xiamen performed better in terms of urban sustainable development. The urban sustainability efficiency in Xiamen has increased with increasing urban population, and the rate and scale of economic development have been higher than in Lanzhou. The assessment and analysis performed in this study show that cities with different natural resources and development characteristics have different forms, patterns, and trajectories of sustainable development.

A data envelope analysis to assess factors affecting technical and economic efficiency of individual broiler breeder hens.

Science.gov (United States)

Romero, L F; Zuidhof, M J; Jeffrey, S R; Naeima, A; Renema, R A; Robinson, F E

2010-08-01

This study evaluated the effect of feed allocation and energetic efficiency on technical and economic efficiency of broiler breeder hens using the data envelope analysis methodology and quantified the effect of variables affecting technical efficiency. A total of 288 Ross 708 pullets were placed in individual cages at 16 wk of age and assigned to 1 of 4 feed allocation groups. Three of them had feed allocated on a group basis with divergent BW targets: standard, high (standard x 1.1), and low (standard x 0.9). The fourth group had feed allocated on an individual bird basis following the standard BW target. Birds were classified in 3 energetic efficiency categories: low, average, and high, based on estimated maintenance requirements. Technical efficiency considered saleable chicks as output and cumulative ME intake and time as inputs. Economic efficiency of feed allocation treatments was analyzed under different cost scenarios. Birds with low feed allocation exhibited a lower technical efficiency (69.4%) than standard (72.1%), which reflected a reduced egg production rate. Feed allocation of the high treatment could have been reduced by 10% with the same chick production as the standard treatment. The low treatment exhibited reduced economic efficiency at greater capital costs, whereas high had reduced economic efficiency at greater feed costs. The average energetic efficiency hens had a lower technical efficiency in the low compared with the standard feed allocation. A 1% increment in estimated maintenance requirement changed technical efficiency by -0.23%, whereas a 1% increment in ME intake had a -0.47% effect. The negative relationship between technical efficiency and ME intake was counterbalanced by a positive correlation of ME intake and egg production. The negative relationship of technical efficiency and maintenance requirements was synergized by a negative correlation of hen maintenance and egg production. Economic efficiency methodologies are effective

Assessment of Extracorporeal Shock Wave Lithotripsy (ESWL) Therapeutic Efficiency in Urolithiasis.

Science.gov (United States)

Tomescu, P; Pănuş, A; Mitroi, G; Drăgoescu, O; Stoica, L; Dena, S; Enache, E

2009-01-01

Extracorporeal shock wave lithotripsy (ESWL) revolutionized the treatment of urolithiasis and gradually became the favorite treatment option so that today it is considered to be the first line of treatment for more than 75% of the patients with urolithiasis. The purpose of this study was the assessment of the therapeutic efficiency, complications and limitations of ESWL in urolithiasis in the initial experience using a third generation electromagnetic lithotripter.  Between 2007 and 2008 we performed ESWL for 167 patients with urolithiasis. We recorded 92 patients with single stone (55.1%) and 72 with multiple lithiasis (44.9%). Stone size varied between 7 and 24 mm with an average of 12.3±7.1 mm. Radioopac stones were found in 104 patients (62.3%) while radiolucent stones in 63 only (37.6%).    Complete stone disintegration and clearance was achieved in most cases (86.2%). Complications were mostly minor and rare (transitory haematuria, renal colic). Severe complications (renal hematoma, steinstrasse) were diagnosed for a limited number of patients (3.6%) and their management was mostly nonsurgical or minimally invasive (retrograde ureteroscopy). ESWL is therefore the first line of treatment for urolithiasis with stone size smaller than 2.5 cm. It has an efficiency rate above 85%, low procedure time, high safety and good tolerability (new generation lithotripters do not require anesthesia) and minimal complications.

Assessment of the Japanese Energy Efficiency Standards Program

Directory of Open Access Journals (Sweden)

Jun Arakawa

2015-03-01

Full Text Available Japanese energy efficiency standards program for appliances is a unique program which sets and revises mandatory standards based on the products of the highest energy efficiency on the markets. This study assessed the cost-effectiveness of the standard settings for air conditioner as a major residential appliance or typical example in the program. Based on analyses of empirical data, the net costs and effects from 1999 to 2040 were estimated. When applying a discount rate of 3%, the cost of abating CO2 emissions realized through the considered standards was estimated to be -13700 JPY/t-CO2. The sensitivity analysis, however, showed the cost turns into positive at a discount rate of 26% or higher. The authors also revealed that the standards’ “excellent” cost-effectiveness largely depends on that of the 1st standard setting, and the CO2 abatement cost through the 2nd standard was estimated to be as high as 26800 JPY/t-CO2. The results imply that the government is required to be careful about the possible economic burden imposed when considering introducing new, additional standards.

AHP 45: REVIEW: AMNYE MACHEN MOUNTAIN CIRCUMAMBULATION

Directory of Open Access Journals (Sweden)

Bill Bleisch

2017-03-01

Full Text Available This sublime documentary was filmed by a Tibetan team in 2014, the Year of the Horse. The film features stunning visual images of sacred Amnye Machen presented with an ethereal soundtrack of Tibetanelectronica fusion. It also includes a large amount of information about the practices of pilgrimage, illustrated with valuable footage of pilgrims at prayer, or walking and prostrating along the kora route; interviews with pilgrims; and extended explanations by Tibetan scholar, Gonpo Lhachen, and Tibetan environmentalist, Tsering Bum.

Evaluating sub-national building-energy efficiency policy options under uncertainty: Efficient sensitivity testing of alternative climate, technological, and socioeconomic futures in a regional integrated-assessment model

International Nuclear Information System (INIS)

Scott, Michael J.; Daly, Don S.; Zhou, Yuyu; Rice, Jennie S.; Patel, Pralit L.; McJeon, Haewon C.; Page Kyle, G.; Kim, Son H.; Eom, Jiyong

2014-01-01

Improving the energy efficiency of building stock, commercial equipment, and household appliances can have a major positive impact on energy use, carbon emissions, and building services. Sub-national regions such as the U.S. states wish to increase energy efficiency, reduce carbon emissions, or adapt to climate change. Evaluating sub-national policies to reduce energy use and emissions is difficult because of the large uncertainties in socioeconomic factors, technology performance and cost, and energy and climate policies. Climate change itself may undercut such policies. However, assessing all of the uncertainties of large-scale energy and climate models by performing thousands of model runs can be a significant modeling effort with its accompanying computational burden. By applying fractional–factorial methods to the GCAM-USA 50-state integrated-assessment model in the context of a particular policy question, this paper demonstrates how a decision-focused sensitivity analysis strategy can greatly reduce computational burden in the presence of uncertainty and reveal the important drivers for decisions and more detailed uncertainty analysis. - Highlights: • We evaluate building energy codes and standards for climate mitigation. • We use an integrated assessment model and fractional factorial methods. • Decision criteria are energy use, CO2 emitted, and building service cost. • We demonstrate sensitivity analysis for three states. • We identify key variables to propagate with Monte Carlo or surrogate models

The assessment of training efficiency. A management tool in Sta. Ma de Garona NPP

International Nuclear Information System (INIS)

Carretero, Felipe; Sanchez Alvarez, Francisco J.; Soriano, Santiago Lucas

2003-01-01

Nowadays, one of the critical factors which determines the success of the companies is their adaptability to changes and the development of key competencies in a more global and competitive market. The acquisition, maintenance and updating of those competencies is a fundamental concern of the training managers. Training management implies also to answer, as accurate as possible, questions as following: Which is the quality of the training activities? Are the taught knowledge, skills and attitudes fully assimilated? Are they transferred to job position? Is it possible to correlate training effort and company results? Which is the comprehensive cost of the training programme? and finally, Is the cost reasonable according to the results?, in other words, has been the training programme efficient enough?The present paper introduces the experience in implementing an assessment system of training efficiency, in Sta. M a de Garona, as a training management tool for decision making. (author)

Performance assessment of Portuguese wind farms: Ownership and managerial efficiency

International Nuclear Information System (INIS)

Pestana Barros, Carlos; Sequeira Antunes, Olinda

2011-01-01

This paper analyzes ownership and unobserved managerial ability as factors affecting the performance of a representative sample of Portuguese wind farms by means of frontier models. These farms are ranked according to their technical efficiency during the period 2004-2008 and homogenous and heterogeneous variables are disentangled in the cost function, which leads us to advise the implementation of common policies as well as policies by segments. Economic implications arising from the study are also considered. - Research highlights: → Wind farms are heterogeneous displaying distinct ownership and managerial characteristics that affect efficiency. → Managerial practices has a positive impact on the efficiency. → Ownership has a positive impact on the efficiency. Large wind farms are more efficient.

High efficiency mixed species radioiodine air sampling, readout, and dose assessment system

International Nuclear Information System (INIS)

Distenfeld, C.; Klemish, J.

1976-05-01

Reactor accidents require monitoring to assess the impact to persons in the environment. This implies methods and apparatus to accurately and economically sample and evaluate possible released activity. The development of a prototype iodine air sampling system that can differentiate against noble gas activity and be evaluated by standard Civil Defense instrumentation is reported. The apparatus can efficiently (95 percent) collect organic or inorganic, particulate or gaseous radioiodine in concentrations below stable atmospheric iodine, and under severe ambient conditions. Response to noble fission gases was reduced to less than 4 x 10 -4 of an equal iodine airborne activity by heating the collector to approximately 100 0 C. Reliable sample size, +-5 percent, was achieved by using a simple air flow regulator. Thyroid dose commitment was mathematically and graphically related to the iodine isotope distribution expected in the environment and to the response of the Civil Defense CDV-700 instrument used to evaluate the sample. Sensitivity of the method allows dose assessment of 1 to 2 rads to a child's thyroid

Ethnozoological assessment of animals used by Mon traditional medicine vendors at Kyaiktiyo, Myanmar.

Science.gov (United States)

Nijman, Vincent; Shepherd, Chris R

2017-07-12

Wild animals are widely used in traditional Asian medicine but information from Myanmar is lacking. We show that a wide range of animals are used at a pilgrimage site, mostly for their rendered fats and oils to be used in mixed concoctions. The majority of species were sold to be used to treat aching joints, muscle ache and skin diseases. To assess wildlife for sale for medicinal purposes, and document their medicinal use at Kyaiktiyo, a pilgrimage site at a 1100m tall mountain, with many of the pilgrims climbing to the top. In addition we address legal issues relating to the production and sale of traditional medicine that contain legally protected animals. Four visits were made to Kyaiktiyo, Myanmar, between 2000 and 2017 to quantify animal parts on display and through discussions with vendors to obtain information on medicinal use of these parts. Twenty-three species, mostly mammals, were recorded to be used for traditional medicine. The most common were Chinese serow Capricornis milneedwardsii, Asian elephant Elephas maximus, and Asiatic black bear Ursus thibetanus. Over 600 bodies or body parts were present. Combined, these parts purportedly provided cures or relief for at least 15 ailments or diseases. The most commonly mentioned treatment was that of using rendered animal fats/oils externally to relieve/cure aching joints or muscles. This treatment allegedly provides instant relief to pilgrims after an arduous climb up the mountain. Purported cures for various skin diseases was the next common use for the animal species on offer. Ten of the species observed for sale at Kyaiktiyo are listed as globally threatened, and 15 are protected and cannot be legally traded. Ambiguities in Myanmar's legislation mean that protected animals or their body parts cannot be traded, however traditional medicines can be made out of them provided rules relating to the manufacturing of traditional medicines are adhered to. This study indicated that animals and their parts

Lungo le vie di pellegrinaggio: la lezione astronomica di Gerberto a San Michele della Chiusa

Science.gov (United States)

Paladino, Laura C.

A pilgrim on the trails of the Earth: that's how Gerbertus appears to us in the years preceding his pontificate as well in those, brief and intense, in which he was Pope. An ardent pilgrim of faith moved at the same time by vast intellectual interests that allowed him to come into contact with the most important schools of the time, of any cultural tradition; a pilgrim full of love, willing to transmit the enormous heritage of faith and knowledge of which he was custodian. The presence of the illustrious Benedictine is not explicitly documented in the Abbey of San Michele della Chiusa, but the signs of its cultural and ideological influence are evident both in historical memory as in the artistical vestiges of the Sacra: we investigate here, this presence, authoritative, original and versatile, to outline another aspect, still little investigated, of the lesson of Gerbert, monk, scientist, teacher and pastor.

GENERAL CHARACTERISTICS OF RELIGIOUS TOURISM IN CROATIA

Directory of Open Access Journals (Sweden)

Eddy Rot

2014-06-01

Full Text Available Croatia has a rich sacral (tangible and intangible heritage, which undoubtedly has great cultural value, and part of the religious heritage has been included in the World Heritage List of UNESCO. The fact is, however, that, except when it comes to top attractions, churches as tourist facilities, are poorly attended and do not get almost no direct tourism income.. In this paper, after the introductory explanations of basic terms related to religious tourism and pilgrimage, we explore the basic features of religious tourism in Croatia, both on tourist attractions, as well as on the tourist demand. It also presents the results of empirical research on the socio-demographic profile of the author, the role of religion in the life of pilgrims and the satisfaction of the visitors to the Shrine of Mary of Bistrica in 2013 among 50 pilgrims in Marija Bistrica. The main objective is to determine how the pilgrims perceived the tourism offer in religious tourism.

Environmental assessment for the Consumer Products Efficiency Standards program

Energy Technology Data Exchange (ETDEWEB)

1980-05-23

The Energy Policy and Conservation Act of 1975 as amended by the National Energy Conservation Policy Act of 1978, requires the DOE to prescribe energy efficiency standards for thirteen consumer products. The Consumer Products Efficiency Standards (CPES) program covers the following products: refrigerators and refrigerator-freezers; freezers;clothes dryers;water heaters; room air conditioners; home heating equipment (not including furnaces); kitchen ranges and ovens; central air conditioners (cooling and heat pumps); furnaces; dishwashers; television sets; clothes washers; and humidifiers and dehumidifiers. DOE is proposing two sets of standards for all thirteen consumer products: intermediate standards to become effective in 1981 for the first nine products and in 1982 for the second four products, and final standards to become effective in 1986 and 1987, respectively. The final standards are more restrictive than the intermediate standards and will provide manufacturers with the maximum time permitted under the Act to plan and develop extensive new lines of efficient consumer products. The final standards proposed by DOE require the maximum improvements in efficiency which are technologically feasible and economically justified, as required by Section 325(c) of EPCA. The thirteen consumer products account for approximately 90% of all the energy consumed in the nation's residences, or more than 20% of the nation's energy needs. Increases in the energy efficiency of these consumer products can help to narrow the gap between the nation's increasing demand for energy and decreasing supplies of domestic oil and natural gas. Improvements in the efficiency of consumer products can thus help to solve the nation's energy crisis.

State Energy Efficiency Benefits and Opportunities

Science.gov (United States)

Describes the benefits of energy efficiency and how to assess its potential for your state. Also, find details on energy efficiency policies, programs, and resources available for furthering energy efficiency goals.

Efficiency as a parameter for assessing the Polish healthcare system

Directory of Open Access Journals (Sweden)

Magdalena Bogdan

2018-04-01

Full Text Available Introduction. Efficacy is defined as one of the most valid parameters of health system evaluation. It should be said that there is no consistent definition of the concept of effectiveness in health care, which would allow for the evaluation and comparison of health systems in the world. One can not point to the best or even near ideal of the health system. However, you can rank individual health systems with respect to the evaluation of individual parameters or groups of parameters. One of the possibilities is to evaluate the effectiveness of the system. Aim of the study. The aim of the article is to define and analyze particular types of system effectiveness in the context of the Polish health system. Description of knowledge. The literature on the subject is divided into operational and dynamic efficiency. Dynamic efficiency is divided into adaptive and innovative. The Polish health system is characterized by high operational efficiency. Operational efficiency determines the intensity of the system. The key factor for improving the health of the Polish society, as a factor of socio-economic development of the country is to improve the dynamic efficiency of the system. Conclusions. Health care in Poland has high operational efficiency while low dynamic efficiency, both adaptive and innovative, which clearly demonstrates the existence of a paradox of the overall effectiveness of the health care system in Poland.

Assessment of total efficiency in adiabatic engines

Science.gov (United States)

Mitianiec, W.

2016-09-01

The paper presents influence of ceramic coating in all surfaces of the combustion chamber of SI four-stroke engine on working parameters mainly on heat balance and total efficiency. Three cases of engine were considered: standard without ceramic coating, fully adiabatic combustion chamber and engine with different thickness of ceramic coating. Consideration of adiabatic or semi-adiabatic engine was connected with mathematical modelling of heat transfer from the cylinder gas to the cooling medium. This model takes into account changeable convection coefficient based on the experimental formulas of Woschni, heat conductivity of multi-layer walls and also small effect of radiation in SI engines. The simulation model was elaborated with full heat transfer to the cooling medium and unsteady gas flow in the engine intake and exhaust systems. The computer program taking into account 0D model of engine processes in the cylinder and 1D model of gas flow was elaborated for determination of many basic engine thermodynamic parameters for Suzuki DR-Z400S 400 cc SI engine. The paper presents calculation results of influence of the ceramic coating thickness on indicated pressure, specific fuel consumption, cooling and exhaust heat losses. Next it were presented comparisons of effective power, heat losses in the cooling and exhaust systems, total efficiency in function of engine rotational speed and also comparison of temperature inside the cylinder for standard, semi-adiabatic and full adiabatic engine. On the basis of the achieved results it was found higher total efficiency of adiabatic engines at 2500 rpm from 27% for standard engine to 37% for full adiabatic engine.

An Assessment of the Efficiency of Government Regulatory Agencies in Nigeria. Case of the National Agency for Food and Drugs Administration and Control

Directory of Open Access Journals (Sweden)

Aiwanehi Barbara Ofuani

2015-09-01

Full Text Available This study examines Business, Government and Society interrelationships. It eventually narrowed down to assessing the efficiency of government regulatory agencies, in fulfilling the role of government in protecting consumers from unscrupulous practices of businesses. The National Agency for Food and Drugs Administration and Control (NAFDAC was chosen for the study. Since the expectations of the consumers are paramount here, the stakeholder approach method was used for assessing the efficiency of NAFDAC. Literature and previous empirical studies on the topic were examined. For representativeness, data was collected utilizing the survey research design through Questionnaire distributed to 200 respondents in some areas of Lagos Mainland in Lagos state, using the convenience sampling method. 187 copies of the questionnaire representing 93.5% were returned and usable. Descriptive statistics was used to analyze the responses to questions regarding the efficiency of NAFDAC and a hypothesis tested using a one-sample T-test. The findings ran contrary to results from some previous studies. Instead, consumer awareness of the existence of NAFDAC as a regulatory agency and its functions were established, along with a high rate of consumer education. The assessment of its efficiency also showed a high rating. Recommendations were made that the study be replicated in other states of Nigeria and further studies carried out to evaluate its efficiency under previous and current directors for improvement purposes.

Cancer increase study methodology: A review and discussion of the ''Southeastern Massachusetts Health Study 1978--1986''

International Nuclear Information System (INIS)

Sever, L.E.; Baker, D.A.; Gilbert, E.S.; Mahaffey, J.A.

1993-09-01

In October 1990 the Massachusetts Department of Public Health released a report of an epidemiologic study of adult leukemia occurring in the vicinity of the Pilgrim 1 Nuclear Power Plant near Plymouth, Massachusetts. The study used a case-control design in which adult leukemia cases occurring between 1978 and 1986 in 22 towns were compared with persons without leukemia (controls) selected from the same study population. Exposure scores, used to estimate potential for exposure to radioactive emissions from Pilgrim, were calculated for all cases and controls. When the exposure scores of cases were compared with those of controls, the analyses showed the scores to be higher for the leukemia cases, suggesting that individuals with the highest potential for exposure to Pilgrim emissions had a significantly increased risk of leukemia. This association was found only for cases diagnosed before 1984; for cases diagnosed during 1984, 1985, or 1986, no association was observed between leukemia case status and potential for exposure to emissions from the plant. Our review of the report and supporting documents shows no major methodologic problems that would account for the finding of an association between leukemia risk and the Pilgrim plant. Examination of the study findings in relation to what is known about leukemia risks associated with radiation exposure, however, indicates that the results of the Southeastern Massachusetts Health Study are inconsistent with a large body of evidence from a number of other studies

Chaplain, soldier, counselor, pilgrim.

Science.gov (United States)

Muse, Stephen

2004-01-01

The author offers examples of supervision drawing on object relations therapy and Christian faith, doctrine, and life, designed to facilitate theological integration of pastoral identity and clinical practice in the training of U.S. Army Family Life Chaplains. Therapeutic and supervisory relationships are conceived of as dia-Logos encounters requiring the same degree of ascetical sobriety, presence, and vulnerability as prayer and worship. Concepts of therapeutic aggression, functional atheism, and "not knowing" are linked with on-going self-examination and repentance stimulated by empathic engagement of clients as primary ingredients for spiritual growth and effective pastoral counseling.

Energy efficiency rating of districts, case Finland

International Nuclear Information System (INIS)

Hedman, Åsa; Sepponen, Mari; Virtanen, Mikko

2014-01-01

There is an increasing political pressure on the city planning to create more energy efficient city plans. Not only do the city plans have to enable and promote energy efficient solutions, but it also needs to be clearly assessed how energy efficient the plans are. City planners often have no or poor know how about energy efficiency and building technologies which makes it difficult for them to answer to this need without new guidelines and tools. An easy to use tool for the assessment of the energy efficiency of detailed city plans was developed. The aim of the tool is for city planners to easily be able to assess the energy efficiency of the proposed detailed city plan and to be able to compare the impacts of changes in the plan. The tool is designed to be used with no in-depth knowledge about energy or building technology. With a wide use of the tool many missed opportunities for improving energy efficiency can be avoided. It will provide better opportunities for sustainable solutions leading to less harmful environmental impact and reduced emissions. - Highlights: • We have created a tool for assessing energy efficiency of detailed city plans. • The energy source is the most important factor for efficiency of districts in Finland. • Five case districts in Finland were analyzed. • In this paper one residential district has in-depth sensitivity analyses done

Diagnostic Efficiency in Digital Pathology: A Comparison of Optical Versus Digital Assessment in 510 Surgical Pathology Cases.

Science.gov (United States)

Mills, Anne M; Gradecki, Sarah E; Horton, Bethany J; Blackwell, Rebecca; Moskaluk, Christopher A; Mandell, James W; Mills, Stacey E; Cathro, Helen P

2018-01-01

Prior work has shown that digital images and microscopic slides can be interpreted with comparable diagnostic accuracy. Although accuracy has been well-validated, the interpretative time for digital images has scarcely been studied and concerns about efficiency remain a major barrier to adoption. We investigated the efficiency of digital pathology when compared with glass slide interpretation in the diagnosis of surgical pathology biopsy and resection specimens. Slides were pulled from 510 surgical pathology cases from 5 organ systems (gastrointestinal, gynecologic, liver, bladder, and brain). Original diagnoses were independently confirmed by 2 validating pathologists. Diagnostic slides were scanned using the Philips IntelliSite Pathology Solution. Each case was assessed independently on digital and optical by 3 reading pathologists, with a ≥6 week washout period between modalities. Reading pathologists recorded assessment times for each modality; digital times included time to load the case. Diagnostic accuracy was determined based on whether a rendered diagnosis differed significantly from the original diagnosis. Statistical analysis was performed to assess for differences in interpretative times across modalities. All 3 reading pathologists showed comparable diagnostic accuracy across optical and digital modalities (mean major discordance rates with original diagnosis: 4.8% vs. 4.4%, respectively). Mean assessment times ranged from 1.2 to 9.1 seconds slower on digital versus optical. The slowest reader showed a significant learning effect during the course of the study so that digital assessment times decreased over time and were comparable with optical times by the end of the series. Organ site and specimen type did not significantly influence differences in interpretative times. In summary, digital image reading times compare favorably relative to glass slides across a variety of organ systems and specimen types. Mean increase in assessment time is 4

Traditional and new composite endpoints in heart failure clinical trials : facilitating comprehensive efficacy assessments and improving trial efficiency

NARCIS (Netherlands)

Anker, Stefan D. t; Schroeder, Stefan; Atar, Dan; Bax, Jeroen J.; Ceconi, Claudio; Cowie, Martin R.; AdamCrisp,; Dominjon, Fabienne; Ford, Ian; Ghofrani, Hossein-Ardeschir; Gropper, Savion; Hindricks, Gerhard; Hlatky, Mark A.; Holcomb, Richard; Honarpour, Narimon; Jukema, J. Wouter; Kim, Albert M.; Kunz, Michael; Lefkowitz, Martin; Le Floch, Chantal; Landmesser, Ulf; McDonagh, Theresa A.; McMurray, John J.; Merkely, Bela; Packer, Milton; Prasad, Krishna; Revkin, James; Rosano, Giuseppe M. C.; Somaratne, Ransi; Stough, Wendy Gattis; Voors, Adriaan A.; Ruschitzka, Frank

Composite endpoints are commonly used as the primary measure of efficacy in heart failure clinical trials to assess the overall treatment effect and to increase the efficiency of trials. Clinical trials still must enrol large numbers of patients to accrue a sufficient number of outcome events and

Assessment of the Efficiency of Stroke Awareness Campaigns in Hungary.

Science.gov (United States)

Folyovich, András; Biczó, Dávid; Béres-Molnár, Katalin Anna; Toldi, Gergely

2018-03-01

The critical period of stroke management lies between the disease onset and the time of the emergency call, relying on stroke-related knowledge of the population. Public campaigns play a role in spreading relevant health information. Due to the substantial expenses of these campaigns, the assessment of their efficiency is reasonable. We assessed the number of thrombolytic treatments performed in Hungary, subjected to national media coverage and in particular in Budapest, being the location of the Stroke Day campaign, in the period between 2008 and 2015. We compared the change in the daily mean number of thrombolytic treatments performed during the preceding and following day, week, and month. Data were also compared with annual means. No meaningful changes can be seen in the number of thrombolytic treatments on the days immediately following Stroke Days, and casual differences can be seen in the following week. The comparison of the numbers of thrombolytic treatments performed in the postcampaign months with the monthly means in the corresponding years revealed a positive effect in each year except for 2012, 2014, and 2015. Regarding the whole examined period, however, the effect is not statistically significant, neither for data obtained from Hungary nor from Budapest. Better outcomes were observed 1 month after a campaign than more immediately. This can be partly explained by ongoing media coverage in a given period rather than exposure of the public on a single Stroke Day. Copyright © 2018 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

Energy Technology Data Exchange (ETDEWEB)

Morrow, William R. [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Marano, John [JM Energy Consulting, Inc.; Sathaye, Jayant [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Xu, Tengfang [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

2013-02-01

-effective given U.S. DOE fuel price forecasts. This represents roughly 70 million metric tonnes of CO₂ emission reductions assuming 2010 emissions factor for grid electricity. Energy efficiency measures resulting in an additional 400 PJ per year of primary fuels savings and close to 1,700 GWh per year of electricity savings, and an associated 24 million metric tonnes of CO₂ emission reductions are not cost-effective given the same assumption with respect to fuel prices and electricity emissions factors. Compared to the modeled energy requirements for the U.S. petroleum refining sector, the cost effective potential represents a 40% reduction in fuel consumption and a 2% reduction in electricity consumption. The non-cost-effective potential represents an additional 13% reduction in fuel consumption and an additional 7% reduction in electricity consumption. The relative energy reduction potentials are mu ch higher for fuel consumption than electricity consumption largely in part because fuel is the primary energy consumption type in the refineries. Moreover, many cost effective fuel savings measures would increase electricity consumption. The model also has the potential to be used to examine the costs and benefits of the other CO₂ mitigation options, such as combined heat and power (CHP), carbon capture, and the potential introduction of biomass feedstocks. However, these options are not addressed in this report as this report is focused on developing the modeling methodology and assessing fuels savings measures. These opportunities to further reduce refinery sector CO₂ emissions and are recommended for further research and analysis.

An adaptive cubature formula for efficient reliability assessment of nonlinear structural dynamic systems

Science.gov (United States)

Xu, Jun; Kong, Fan

2018-05-01

Extreme value distribution (EVD) evaluation is a critical topic in reliability analysis of nonlinear structural dynamic systems. In this paper, a new method is proposed to obtain the EVD. The maximum entropy method (MEM) with fractional moments as constraints is employed to derive the entire range of EVD. Then, an adaptive cubature formula is proposed for fractional moments assessment involved in MEM, which is closely related to the efficiency and accuracy for reliability analysis. Three point sets, which include a total of 2d2 + 1 integration points in the dimension d, are generated in the proposed formula. In this regard, the efficiency of the proposed formula is ensured. Besides, a "free" parameter is introduced, which makes the proposed formula adaptive with the dimension. The "free" parameter is determined by arranging one point set adjacent to the boundary of the hyper-sphere which contains the bulk of total probability. In this regard, the tail distribution may be better reproduced and the fractional moments could be evaluated with accuracy. Finally, the proposed method is applied to a ten-storey shear frame structure under seismic excitations, which exhibits strong nonlinearity. The numerical results demonstrate the efficacy of the proposed method.

Energy efficiency: from principles to reality

International Nuclear Information System (INIS)

Baudry, Paul; Ballot-Miguel, Benedicte; Binet, Guillaume; Bordigoni, Mathieu; Decellas, Fabrice; Hauser, Chantal; Hita, Laurent; Laurent, Marie-Helene; Osso, Dominique; Peureux, Jean-Louis; Pham Van Cang, Christian

2015-01-01

This collective publication proposes a comprehensive overview of issues related to energy efficiency: associated stakes, methods of assessment of energy savings and of their costs, methods of action for energy efficiency policies, application in the housing, office building and industry sectors based on energy consumption modes in these different sectors, and main technologies aimed at improving energy efficiency. The first chapter proposes an historical perspective on energy, outlines the crucial role of energy efficiency in today's and tomorrow's contexts, and discusses which are the different levers of action to increase this efficiency. The next chapters address methods of assessment of energy efficiency, identify and discuss the use of different potential sources of energy saving, propose an overview of the various objectives and instruments of policies for energy efficiency, and address the issue of energy efficiency in the housing sector, in the office building sector, and in the industry sector by indicating the current levels of energy consumption, by identifying the various potential sources of energy saving, and by indicating available technologies aimed at improving energy efficiency

An assessment of energy efficiency based on environmental constraints and its influencing factors in China.

Science.gov (United States)

Chen, Yao; Xu, Jing-Ting

2018-05-03

The super-efficiency directional distance function (DDF) with data envelopment analysis (DEA) model (SEDDF-DEA) is more facilitative than to increase traditional method as a rise of energy efficiency in China, which is currently important energy development from Asia-pacific region countries. SEDDF-DEA is promoted as sustained total-factor energy efficiency (TFEE), value added outputs, and Malmquist-Luenberger productivity index (MLPI) to otherwise thorny environmental energy productivity problems with environmental constraint to concrete the means of regression model. This paper assesses the energy efficiency under environmental constraints using panel data covering the years of 2000-2015 in China. Considering the environmental constraints, the results showed that the average TFEE of the whole country followed an upward trend after 2006. The average MLPI score for the whole country increased by 10.57% during 2005-2010, which was mainly due to the progress made in developing and applying environmental technologies. The TFEE of the whole nation was promoted by the accumulation of capital stock, while it was suppressed by excessive production in secondary industries and foreign investment. The primary challenge for the northeast of China is to strengthen industrial transformation and upgrade traditional industries, as well as adjusting the economy and energy structure. The eastern and central regions of the country need to exploit clean- or low-energy industry to improve inefficiencies due to excessive consumption. The western region of China needs to implement renewable energy strategies to promote regional development.

[Technical efficiency assessment of public primary care providers in the Basque Country (Spain), 2010-2013].

Science.gov (United States)

Cordero, José Manuel; Nuño-Solinís, Roberto; Orueta, Juan F; Polo, Cristina; Del Río-Cámara, Mario; Alonso-Morán, Edurne

2016-01-01

To evaluate the technical efficiency of primary care units operating in the Basque Health Service during the period 2010-2013, corresponding to the implementation of a care integration strategy by health authorities. This study included 11 of the 12 primary care units in the Basque Health Service during the period 2010-2013. Data envelopment analysis (DEA) was used to assess the technical efficiency of the units. In particular, we applied the extension DEA windows to analyse all units as if they were in a single period (33 observations) as well as a conditional model, which allowed incorporation of the effect of the characteristics of the population covered. The outputs considered were a quality index based on fulfilment of different requirements related to primary care delivery and the rate of avoidable hospitalizations (treated as an undesirable output). The inputs used were the number of physicians, the number of nurses and the costs of prescriptions. The morbidity index was included as an exogenous variable. The results showed that the efficiency of all the units improved during the study period. However, this improvement was not greater in the units incorporated in the integrated healthcare organisation. In a context of global transformation of care delivery in the Basque country in the study period, primary care units increased their efficiency. However, this effect was not larger in vertically integrated primary care providers. Copyright © 2015 SESPAS. Published by Elsevier Espana. All rights reserved.

Fuel poverty and energy efficiency obligations – A critical assessment of the supplier obligation in the UK

International Nuclear Information System (INIS)

Rosenow, Jan; Platt, Reg; Flanagan, Brooke

2013-01-01

Energy efficiency obligations (or white certificates) are increasingly used to reduce carbon emissions. While the energy efficiency obligations were originally intended as carbon reduction and not fuel poverty policies, due to recognition of the potential for regressive outcomes they often include provisions for vulnerable and low-income customers. Intuitively, reducing carbon emissions and alleviating fuel poverty seem to be two sides of the same coin. There are, however, considerable tensions between the two when addressed through energy efficiency obligations, particularly arising from the potentially regressive impacts of rising energy prices resulting from such obligations, but also the complexity of targeting fuel poor households and the implications for deliverability. Despite those tensions, the UK government decided to use energy efficiency obligations, the supplier obligation, as the main policy for reducing fuel poverty. In light of the proposals, this paper provides an analysis of the main tensions between carbon reduction and fuel poverty alleviation within energy efficiency obligations, outlines the fuel poverty provisions of the British Supplier Obligation, assesses its rules for identifying the fuel poor, and provides a critical analysis of the planned policy changes. Based on this analysis, alternative approaches to targeting fuel poverty within future supplier obligations are proposed. - Highlights: • First comprehensive analysis of energy savings obligations and fuel poverty. • Systematic comparison of targeting efficiency of fuel poverty programmes. • Critical analysis of fuel poverty provisions in British supplier obligations. • Proposal of a new approach to targeting fuel poverty within energy savings obligations

Assessing Cross-disciplinary Efficiency of Soil Amendments for Agro-biologically, Economically, and Ecologically Integrated Soil Health Management

Science.gov (United States)

2010-01-01

Preventive and/or manipulative practices will be needed to maintain soil's biological, physiochemical, nutritional, and structural health in natural, managed, and disturbed ecosystems as a foundation for food security and global ecosystem sustainability. While there is a substantial body of interdisciplinary science on understanding function and structure of soil ecosystems, key gaps must be bridged in assessing integrated agro-biological, ecological, economical, and environmental efficiency of soil manipulation practices in time and space across ecosystems. This presentation discusses the application of a fertilizer use efficiency (FUE) model for assessing agronomic, economic, ecological, environmental, and nematode (pest) management efficiency of soil amendments. FUE is defined as increase in host productivity and/or decrease in plant-parasitic nematode population density in response to a given fertilizer treatment. Using the effects of nutrient amendment on Heterodera glycines population density and normalized difference vegetative index (indicator of physiological activities) of a soybean cultivar ‘CX 252’, how the FUE model recognizes variable responses and separates nutrient deficiency and toxicity from nematode parasitism as well as suitability of treatments designed to achieve desired biological and physiochemical soil health conditions is demonstrated. As part of bridging gaps between agricultural and ecological approaches to integrated understanding and management of soil health, modifications of the FUE model for analyzing the relationships amongst nematode community structure, soil parameters (eg. pH, nutrients, %OM), and plant response to soil amendment is discussed. PMID:22736840

EPA’s Travel Efficiency Method (TEAM) AMPO Presentation

Science.gov (United States)

Presentation describes EPA’s Travel Efficiency Assessment Method (TEAM) assessing potential travel efficiency strategies for reducing travel activity and emissions, includes reduction estimates in Vehicle Miles Traveled in four different geographic areas.

The assessment of different models to predict solar module temperature, output power and efficiency for Nis, Serbia

International Nuclear Information System (INIS)

Pantic, Lana S.; Pavlović, Tomislav M.; Milosavljević, Dragana D.; Radonjic, Ivana S.; Radovic, Miodrag K.; Sazhko, Galina

2016-01-01

Five different models for calculating solar module temperature, output power and efficiency for sunny days with different solar radiation intensities and ambient temperatures are assessed in this paper. Thereafter, modeled values are compared to the experimentally obtained values for the horizontal solar module in Nis, Serbia. The criterion for determining the best model was based on the statistical analysis and the agreement between the calculated and the experimental values. The calculated values of solar module temperature are in good agreement with the experimentally obtained ones, with some variations over and under the measured values. The best agreement between calculated and experimentally obtained values was for summer months with high solar radiation intensity. The nonlinear model for calculating the output power is much better than the linear model and at the same time predicts better the total electrical energy generated by the solar module during the day. The nonlinear model for calculating the solar module efficiency predicts the efficiency higher than the STC (Standard Test Conditions) value of solar module efficiency for all conditions, while the linear model predicts the solar module efficiency very well. This paper provides a simple and efficient guideline to estimate relevant parameters of a monocrystalline silicon solar module under the moderate-continental climate conditions. - Highlights: • Linear model for solar module temperature gives accurate predictions for August. • The nonlinear model better predicts the solar module power than the linear model. • For calculating solar module power for Nis we propose the nonlinear model. • For calculating solar model efficiency for Nis we propose adoption of linear model. • The adopted models can be used for calculations throughout the year.

Effects of cardiac energy efficiency in diastolic heart failure. Assessment with positron emission tomography with 11C-acetate

International Nuclear Information System (INIS)

Hasegawa, Shinji; Yamamoto, Kazuhiro; Sakata, Yasushi; Takeda, Yasuharu; Kajimoto, Katsufumi; Kanai, Yasukazu; Hori, Masatsugu; Hatazawa, Jun

2008-01-01

Diastolic heart failure (DHF) has become a high social burden, and its major underlying cardiovascular disease is hypertensive heart disease. However, the pathogenesis of DHF remains to be clarified. This study aimed to assess the effects of cardiac energy efficiency in DHF patients. 11 C-Acetate positron emission tomography and echocardiography were conducted in 11 DHF Japanese patients and 10 normal volunteers. The myocardial clearance rate of radiolabeled 11 C-acetate was measured to calculate the work metabolic index (WMI), an index of cardiac efficiency. The ratio of peak mitral E wave velocity to peak early diastolic septal myocardial velocity (E/e') was calculated to assess left ventricular (LV) filling pressure. The LV mass index was greater and the mean age was higher in the DHF patients than in the normal volunteers. There was no difference in WMI between the two groups. However, WMI varied widely among the DHF patients and was inversely correlated with E/e' (r=-0.699, p=0.017). In contrast, there was no correlation in the normal volunteers. In conclusion, the inefficiency of energy utilization is not a primary cause of diastolic dysfunction or DHF, and cardiac efficiency may not affect diastolic function in normal hearts. However, the energy-wasting state may induce the elevation of LV filling pressure in DHF patients, which was considered to principally result from the progressive diastolic dysfunction. (author)

EFFICIENCY AND SAFETY ASSESSMENT OF GENERIC ATORVASTATINE IN PATIENTS WITH HYPERLIPIDEMIA

Directory of Open Access Journals (Sweden)

J. E. Semyonova

2015-12-01

Full Text Available Aim. To assess in a short-term study efficiency and safety of hypolipidemic therapy with atorvastatine generic, Tulip, in comparison with simvastatine generic, Vasilip, in hyperlipidemic patients.Material and methods. Open, randomized, comparative, cross over study included 87 patients with hyperlipidemia, who didn’t receive hypolipidemic drugs within 6 weeks, or followed hypolipidemic diet for 4 weeks. Each patient received therapy with one of the studied drugs within 6 weeks. Then after 4-week wash-out period the second therapy with the other drug was held. Consequence of courses with each drug was set by randomization. Initial dose of both drugs was 10 mg daily. Dose was adjusted after 3 weeks. The dose was increased to 20 mg daily if cholesterol of low density lipoproteid (CLDL hadn’t reached target level (< 115 mg/dl. of Treatment safety was assessed on the basis of clinical data, hepatic enzymes activity and creatine phosphokinase levels.Results. It is shown, that to reach target figures of plasma lipid spectrum, Vasilip dose was increased significantly more often, than Tulip dose. Average Tulip dose after titration was 14,8 mg daily, Vasilip dose – 15,6 mg daily. Patients with initially higher level of triglycerides (TG > 170 mg/dl after 6 weeks with Tulip treatment showed TG reduction by 38% and with Vasilip treatment – by 20%. Both drugs showed good tolerance, no significant differences in number of side-effects were observed.Conclusion. 6-week treatment with atorvastatine generic Tulip shows significant hypolipidemic effect, which appears in significant reduction of CLDL, total cholesterol, TG compared to the initial levels. Degree of total cholesterol reduction is significantly higher with Tulip treatment compared to Vasilip treatment. Analyses shown that target levels of the assessed figures were reached in more patients, treated with Tulip. Side-effects in Tulip treatment were not severe.

EFFICIENCY AND SAFETY ASSESSMENT OF GENERIC ATORVASTATINE IN PATIENTS WITH HYPERLIPIDEMIA

Directory of Open Access Journals (Sweden)

J. E. Semyonova

2005-01-01

Full Text Available Aim. To assess in a short-term study efficiency and safety of hypolipidemic therapy with atorvastatine generic, Tulip, in comparison with simvastatine generic, Vasilip, in hyperlipidemic patients.Material and methods. Open, randomized, comparative, cross over study included 87 patients with hyperlipidemia, who didn’t receive hypolipidemic drugs within 6 weeks, or followed hypolipidemic diet for 4 weeks. Each patient received therapy with one of the studied drugs within 6 weeks. Then after 4-week wash-out period the second therapy with the other drug was held. Consequence of courses with each drug was set by randomization. Initial dose of both drugs was 10 mg daily. Dose was adjusted after 3 weeks. The dose was increased to 20 mg daily if cholesterol of low density lipoproteid (CLDL hadn’t reached target level (< 115 mg/dl. of Treatment safety was assessed on the basis of clinical data, hepatic enzymes activity and creatine phosphokinase levels.Results. It is shown, that to reach target figures of plasma lipid spectrum, Vasilip dose was increased significantly more often, than Tulip dose. Average Tulip dose after titration was 14,8 mg daily, Vasilip dose – 15,6 mg daily. Patients with initially higher level of triglycerides (TG > 170 mg/dl after 6 weeks with Tulip treatment showed TG reduction by 38% and with Vasilip treatment – by 20%. Both drugs showed good tolerance, no significant differences in number of side-effects were observed.Conclusion. 6-week treatment with atorvastatine generic Tulip shows significant hypolipidemic effect, which appears in significant reduction of CLDL, total cholesterol, TG compared to the initial levels. Degree of total cholesterol reduction is significantly higher with Tulip treatment compared to Vasilip treatment. Analyses shown that target levels of the assessed figures were reached in more patients, treated with Tulip. Side-effects in Tulip treatment were not severe.

Caracterización epidemiológica y factores de riesgo asociados a la peregrinación religiosa a Arabia Saudí: Resultados de una cohorte prospectiva 2008-2009 Epidemiology and risk factors associated with religious pilgrimage to Saudi Arabia: Results of a prospective cohort 2008-2009

Directory of Open Access Journals (Sweden)

Lluís Valerio

2012-06-01

conducted of a cohort of pilgrims attended for pre-travel preventive activities in the North Metropolitan International Health Unit (Santa Coloma de Gramenet, Barcelona, Spain from 2009-2010. Results: A total of 193 pilgrims were assessed and 135 (69.9% were men. Their mean age (SD was 37.1 (16.9 years. Among the pilgrims, 176 (91.2% were immigrants, mainly from Pakistan (54.9%, Morocco (29%, Bangladesh (4.1% or other countries (7.2%. The pilgrims stayed in Saudi Arabia a mean (SD of 16.3 (9.2 days. Eighty (41.5% opted for the 1 month-long pilgrimage (Hajj and 113 (58.5% for the shorter Umra. One or more pathological antecedent was recorded in 29 (15%. Vaccination coverage was >75% for tetanus-diphtheria, pneumococcal and quadrivalent meningitis but was only 70.4% for influenza. After returning, 41 (13.5% pilgrims reported some health problem; of these, 61% were respiratory tract symptoms. The risk factors independently correlated with the presence of diseases was the number of days in Saudi Arabia (OR=1.06; 95% CI: 1.01-1.11 and taking part in the Hajj compared with the Umra (OR=1.08; 95% CI: 1.07-1.12. Conclusions: Religious pilgrims from Spain to Saudi Arabia are mainly young and healthy. Those with longer stays abroad contracted a higher number of diseases.

Assessment of the Charging Policy in Energy Efficiency of the Enterprise

Science.gov (United States)

Shutov, E. A.; E Turukina, T.; Anisimov, T. S.

2017-04-01

The forecasting problem for energy facilities with a power exceeding 670 kW is currently one of the main. In connection with rules of the retail electricity market such customers also pay for actual energy consumption deviations from plan value. In compliance with the hierarchical stages of the electricity market a guaranteeing supplier is to respect the interests of distribution and generation companies that require load leveling. The answer to this question for industrial enterprise is possible only within technological process through implementation of energy-efficient processing chains with the adaptive function and forecasting tool. In such a circumstance the primary objective of a forecasting is reduce the energy consumption costs by taking account of the energy cost correlation for 24 hours for forming of pumping unit work schedule. The pumping unit virtual model with the variable frequency drive is considered. The forecasting tool and the optimizer are integrated into typical control circuit. Economic assessment of the optimization method was estimated.

Optimal Control as a method for Diesel engine efficiency assessment including pressure and NO_x constraints

International Nuclear Information System (INIS)

Guardiola, Carlos; Climent, Héctor; Pla, Benjamín; Reig, Alberto

2017-01-01

Highlights: • Optimal Control is applied for heat release shaping in internal combustion engines. • Optimal Control allows to assess the engine performance with a realistic reference. • The proposed method gives a target heat release law to define control strategies. - Abstract: The present paper studies the optimal heat release law in a Diesel engine to maximise the indicated efficiency subject to different constraints, namely: maximum cylinder pressure, maximum cylinder pressure derivative, and NO_x emission restrictions. With this objective, a simple but also representative model of the combustion process has been implemented. The model consists of a 0D energy balance model aimed to provide the pressure and temperature evolutions in the high pressure loop of the engine thermodynamic cycle from the gas conditions at the intake valve closing and the heat release law. The gas pressure and temperature evolutions allow to compute the engine efficiency and NO_x emissions. The comparison between model and experimental results shows that despite the model simplicity, it is able to reproduce the engine efficiency and NO_x emissions. After the model identification and validation, the optimal control problem is posed and solved by means of Dynamic Programming (DP). Also, if only pressure constraints are considered, the paper proposes a solution that reduces the computation cost of the DP strategy in two orders of magnitude for the case being analysed. The solution provides a target heat release law to define injection strategies but also a more realistic maximum efficiency boundary than the ideal thermodynamic cycles usually employed to estimate the maximum engine efficiency.

Final Assessment: U.S. Virgin Islands Industrial Development Park and Adjacent Facilities Energy-Efficiency and Micro-Grid Infrastructure

Energy Technology Data Exchange (ETDEWEB)

Petersen, Joseph M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Boyd, Paul A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dahowski, Robert T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Parker, Graham B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-12-31

The purpose of this assessment was to undertake an assessment and analysis of cost-effective options for energy-efficiency improvements and the deployment of a micro-grid to increase the energy resilience at the U.S. Virgin Islands Industrial Development Park (IDP) and adjacent facilities in St. Croix, Virgin Islands. The Economic Development Authority sought assistance from the U.S. Department of Energy to undertake this assessment undertaken by Pacific Northwest National Laboratory. The assessment included 18 buildings plus the perimeter security lighting at the Virgin Islands Bureau of Correctional Facility, four buildings plus exterior lighting at the IDP, and five buildings (one of which is to be constructed) at the Virgin Islands Police Department for a total of 27 buildings with a total of nearly 323,000 square feet.

Expansion of environmental impact assessment for eco-efficiency evaluation of China's economic sectors: An economic input-output based frontier approach.

Science.gov (United States)

Xing, Zhencheng; Wang, Jigan; Zhang, Jie

2018-09-01

Due to the increasing environmental burdens caused by dramatic economic expansion, eco-efficiency indicating how efficient the economic activity is with respect to its environmental impacts has become a topic of considerable interest in China. In this context, Economic Input-output Life Cycle Assessment (EIO-LCA) and Data Envelopment Analysis (DEA) are combined to assess the environmental impacts and eco-efficiency of China's 26 economic sectors. The EIO-LCA results indicate that Electricity Production and Supply sector is the largest net exporter in energy usage, CO 2 emission and exhaust emission categories, while Construction sector is the largest net importer for five impact categories except for water withdrawal. Moreover, Construction sector is found to be the destination of the largest sector-to-sector environmental impact flows for the five impact categories and make the most contributions to the total environmental impacts. Another key finding is that Agriculture sector is both the largest net exporter and the greatest contributor for water withdrawal category. DEA results indicate that seven sectors are eco-efficient while over 70% of China's economic sectors are inefficient and require significant improvements. The average target improvements range between 23.30% and 35.06% depending on the impact category. Further sensitivity analysis reveals that the average sensitivity ratios vary from 7.7% to 15.7% among the six impact categories, which are found to be negatively correlated with their improvement potentials. Finally, several policy recommendations are made to mitigate environmental impacts of China's economic sectors and improve their eco-efficiency levels. Copyright © 2018 Elsevier B.V. All rights reserved.

Bridging the industrial energy efficiency gap – Assessing the evidence from the Italian white certificate scheme

International Nuclear Information System (INIS)

Stede, Jan

2017-01-01

The Italian white certificate scheme is the main national policy instrument to incentivise energy efficiency of the industrial sector, with savings from white certificates amounting to 2% of Italy's 2012 primary energy consumption. The mechanism sets binding energy-saving targets on electricity and gas distributors with at least 50,000 clients and includes a voluntary opt-in model for participation from other parties. This paper investigates and assesses the elements of the scheme that help overcome several barriers to deliver industrial energy efficiency. Results from a survey conducted among leading experts indicate that the Italian system provides a strong financial incentive to energy efficiency investments, covering a significant share of investment costs and thus reducing payback time. Moreover, the scheme fosters the development of energy service companies (ESCOs), which are key to developing, installing and arranging finance for projects on the ground. In conjunction with other policies, the mechanism also raises awareness of energy efficiency investment opportunities, thus helping overcome the market failure of insufficient information. Core challenges remain, including tackling regulatory uncertainty and improving access to finance. - Highlights: • Due to a strong monetary incentive, energy savings are mainly achieved in industry. • White certificates cover around 25 per cent of investment costs in Italian industry. • Active energy services sector with >100 energy service companies built from scratch. • Tackling regulatory uncertainty is the key challenge.

Energy efficiency in Swedish industry

International Nuclear Information System (INIS)

Zhang, Shanshan; Lundgren, Tommy; Zhou, Wenchao

2016-01-01

This paper assesses energy efficiency in Swedish industry. Using unique firm-level panel data covering the years 2001–2008, the efficiency estimates are obtained for firms in 14 industrial sectors by using data envelopment analysis (DEA). The analysis accounts for multi-output technologies where undesirable outputs are produced alongside with the desirable output. The results show that there was potential to improve energy efficiency in all the sectors and relatively large energy inefficiencies existed in small energy-use industries in the sample period. Also, we assess how the EU ETS, the carbon dioxide (CO_2) tax and the energy tax affect energy efficiency by conducting a second-stage regression analysis. To obtain consistent estimates for the regression model, we apply a modified, input-oriented version of the double bootstrap procedure of Simar and Wilson (2007). The results of the regression analysis reveal that the EU ETS and the CO_2 tax did not have significant influences on energy efficiency in the sample period. However, the energy tax had a positive relation with the energy efficiency. - Highlights: • We use DEA to estimate firm-level energy efficiency in Swedish industry. • We examine impacts of climate and energy policies on energy efficiency. • The analyzed policies are Swedish carbon and energy taxes and the EU ETS. • Carbon tax and EU ETS did not have significant influences on energy efficiency. • The energy tax had a positive relation with energy efficiency.

Energy Efficiency Indicators for Assessing Construction Systems Storing Renewable Energy: Application to Phase Change Material-Bearing Façades

Directory of Open Access Journals (Sweden)

José A. Tenorio

2015-08-01

Full Text Available Assessing the performance or energy efficiency of a single construction element by itself is often a futile exercise. That is not the case, however, when an element is designed, among others, to improve building energy performance by harnessing renewable energy in a process that requires a source of external energy. Harnessing renewable energy is acquiring growing interest in Mediterranean climates as a strategy for reducing the energy consumed by buildings. When such reduction is oriented to lowering demand, the strategy consists in reducing the building’s energy needs with the use of construction elements able to passively absorb, dissipate, or accumulate energy. When reduction is pursued through M&E services, renewable energy enhances building performance. The efficiency of construction systems that use renewable energy but require a supplementary power supply to operate can be assessed by likening these systems to regenerative heat exchangers built into the building. The indicators needed for this purpose are particularly useful for designers, for they can be used to compare the efficiency or performance to deliver an optimal design for each building. This article proposes a series of indicators developed to that end and describes their application to façades bearing phase change materials (PCMs.

Virtual water trade: an assessment of water use efficiency in the international food trade

Directory of Open Access Journals (Sweden)

H. Yang

2006-01-01

Full Text Available Amid an increasing water scarcity in many parts of the world, virtual water trade as both a policy instrument and practical means to balance the local, national and global water budget has received much attention in recent years. Building upon the knowledge of virtual water accounting in the literature, this study assesses the efficiency of water use embodied in the international food trade from the perspectives of exporting and importing countries and at the global and country levels. The investigation reveals that the virtual water flows primarily from countries of high crop water productivity to countries of low crop water productivity, generating a global saving in water use. Meanwhile, the total virtual water trade is dominated by green virtual water, which constitutes a low opportunity cost of water use as opposed to blue virtual water. A sensitivity analysis, however, suggests high uncertainties in the virtual water accounting and the estimation of the scale of water saving. The study also raises awareness of the limited effect of water scarcity on the global virtual water trade and the negative implications of the global water saving for the water use efficiency and food security in importing countries and the environment in exporting countries. The analysis shows the complexity in evaluating the efficiency gains in the international virtual water trade. The findings of the study, nevertheless, call for a greater emphasis on rainfed agriculture to improve the global food security and environmental sustainability.

Quick assessment of binary distillation efficiency using a heat engine perspective

International Nuclear Information System (INIS)

Blahušiak, M.; Kiss, A.A.; Kersten, S.R.A.; Schuur, B.

2016-01-01

With emphasis on close boiling, (near-)ideal VLE mixtures, this paper links the efficiency of distillation to the binary feed composition and thermal properties of the compounds. The proposed approach, treating the process as a heat engine, allows to directly quantify distillation performance (in terms of energy intensity & efficiency) based on the components boiling points and feed composition. In addition, this approach reviews and formulates simple, approximate and essentially non-iterative calculation procedures to quickly estimate the energy efficiency of distillation. These estimations may be applied to identify opportunities to save significant amounts of energy. The results show that the reboiler duty for low relative volatility is relatively independent of the heat of vaporization and feed composition, while being reciprocally proportional to the Carnot efficiency of the distillation column. The internal efficiency for distillation of mixtures with low relative volatility has a maximum of about 70% for a symmetrical feed (equimolar ratio) and decreases to zero for unsymmetrical feed compositions approaching infinite dilution. With increasing relative volatility, the maximum efficiency is preserved, but the locus shifts towards lower light component fractions. At very high relative volatility, the internal efficiency increases with decreasing concentration of light component, as typical for evaporators. - Highlights: • A heat engine perspective was applied to estimate binary distillation efficiency. • The method was derived from first principles. • Validation on industrial cases showed the strength of the method.

Potential for the international spread of middle East respiratory syndrome in association with mass gatherings in saudi arabia.

Science.gov (United States)

Khan, Kamran; Sears, Jennifer; Hu, Vivian Wei; Brownstein, John S; Hay, Simon; Kossowsky, David; Eckhardt, Rose; Chim, Tina; Berry, Isha; Bogoch, Isaac; Cetron, Martin

2013-07-17

A novel coronavirus (MERS-CoV) causing severe, life-threatening respiratory disease has emerged in the Middle East at a time when two international mass gatherings in Saudi Arabia are imminent. While MERS-CoV has already spread to and within other countries, these mass gatherings could further amplify and/or accelerate its international dissemination, especially since the origins and geographic source of the virus remain poorly understood. We analyzed 2012 worldwide flight itinerary data and historic Hajj pilgrim data to predict population movements out of Saudi Arabia and the broader Middle East to help cities and countries assess their potential for MERS-CoV importation. We compared the magnitude of travel to countries with their World Bank economic status and per capita healthcare expenditures as surrogate markers of their capacity for timely detection of imported MERS-CoV and their ability to mount an effective public health response. 16.8 million travelers flew on commercial flights out of Saudi Arabia, Jordan, Qatar, and the United Arab Emirates between June and November 2012, of which 51.6% were destined for India (16.3%), Egypt (10.4%), Pakistan (7.8%), the United Kingdom (4.3%), Kuwait (3.6%), Bangladesh (3.1%), Iran (3.1%) and Bahrain (2.9%). Among the 1.74 million foreign pilgrims who performed the Hajj last year, an estimated 65.1% originated from low and lower-middle income countries. MERS-CoV is an emerging pathogen with pandemic potential with its apparent epicenter in Saudi Arabia, where millions of pilgrims will imminently congregate for two international mass gatherings. Understanding global population movements out of the Middle East through the end of this year's Hajj could help direct anticipatory MERS-CoV surveillance and public health preparedness to mitigate its potential global health and economic impacts.

Analysis and performance assessment of a fragment retransmission scheme for energy efficient IEEE 802.11 WLANs.

Science.gov (United States)

Mafole, Prosper; Aritsugi, Masayoshi

2016-01-01

Backoff-free fragment retransmission (BFFR) scheme enhances the performance of legacy MAC layer fragmentation by eliminating contention overhead. The eliminated overhead is the result of backoff executed before a retransmission attempt is made when fragment transmission failure occurs within a fragment burst. This paper provides a mathematical analysis of BFFR energy efficiency and further assesses, by means of simulations, the energy efficiency, throughput and delay obtained when BFFR is used. The validity of the new scheme is evaluated in different scenarios namely, constant bit rate traffic, realistic bursty internet traffic, node mobility, rigid and elastic flows and their combinations at different traffic loads. We also evaluate and discuss the impact of BFFR on MAC fairness when the number of nodes is varied from 4 to 10. It is shown that BFFR has advantages over legacy MAC fragmentation scheme in all the scenarios.

DEA best practice assesses relative efficiency, profitability

International Nuclear Information System (INIS)

Taylor, D.T.; Thompson, R.G.

1995-01-01

The US Federal Energy Regulatory Commission (FERC), in its Order 636 of Apr. 8, 1992, stated, ''All natural gas suppliers, including pipelines, will compete for gas purchases on an equal footing.'' This FERC order changed the economic environment in the natural gas pipeline industry. Now, gas pipeline companies must know their market position, since rate of return regulation is no longer relevant. They must be managed more than before as companies have been in less-regulated parts of the oil and gas business. How they adapt to the new environment, therefore, can be instructive to companies throughout the energy industry. In this article, DEA best-practice methods measure relative efficiency and profitability potential. This measurement reflects fundamental economic relationships. The operational efficiency model analyzed is as follows: Y 1 = f(x 1 , x 2 ), where Y 1 is gross profits, x 1 is total assets (capital employed), and x 2 is total employees (labor employed). Y 1 is a comprehensive indicator of a pipeline's output, whereas x 1 represents the pipeline's total capital employed, and x 2 represents the pipeline's total labor employed. This model reflects principles long studied in economics

Detection and characterization of flaws in segments of light water reactor pressure vessels

International Nuclear Information System (INIS)

Cook, K.V.; Cunningham, R.A. Jr.; McClung, R.W.

1988-01-01

Studies have been conducted to determine flaw density in segments cut from light water reactor )LWR) pressure vessels as part of the Oak Ridge National Laboratory's Heavy-Section Steel Technology (H SST) Program. Segments from the Hope Creek Unit 2 vessel and the Pilgrim Unit 2 Vessel were purchased from salvage dealers. Hope Creek was a boiling water reactor (BWR) design and Pilgrim was a pressurized water reactor (PWR) design. Neither were ever placed in service. Objectives were to evaluate these LWR segments for flaws with ultrasonic and liquid penetrant techniques. Both objectives were successfully completed. One significant indication was detected in a Hope Creek seam weld by ultrasonic techniques and characterized by further analyses terminating with destructive correlation. This indication [with a through-wall dimension of ∼6 mm (∼0.24 in.)] was detected in only 3 m (10 ft) of weldment and offers extremely limited data when compared to the extent of welding even in a single pressure vessel. However, the detection and confirmation of the flaw in the arbitrarily selected sections implies the Marshall report estimates (and others) are nonconservative for such small flaws. No significant indications were detected in the Pilgrim material by ultrasonic techniques. Unfortunately, the Pilgrim segments contained relatively little weldment; thus, we limited our ultrasonic examinations to the cladding and subcladding regions. Fluorescent liquid penetrant inspection of the cladding surfaces for both LWR segments detected no significant indications [i.e., for a total of approximately 6.8 m 2 (72 ft 2 ) of cladding surface]. (author)

Dinamika haji Indonesia sejak era kolonial dan problematika calon haji ilegal

Directory of Open Access Journals (Sweden)

Moh. Rosyid

2017-12-01

Full Text Available The number of Indonesian pilgrims every year is increasing. On the other hand, the allocation of the number of pilgrims to be dispatched is limited by the quota. This triggers the waiting list and the share of various hajj efforts despite the violation of the law. However, not pilgrims know that pilgrimage using other country’s passport is a violation of Law No. 12 of 2006 on Citizenship and possible losing of one's nationality. From historical perspective, Muslims’ pilgrim dated back from the 16th century. At that time, there was strong suspicion that upon returning from pilgrimage, Muslims tend to be “rebellious” and initiated movement against the Dutch colonial government. Thus, the Dutch made a strict regulation concerning the Hajj and scrutinized Muslims before pilgrimage, while staying in Mecca and after their return. Among the movement against the Dutch led by Muslim upon returning the Hajj was the Padri movement. Nowadays, the number of Muslims who intend to go Hajj is rising significantly, and the waiting list goes for 15 to 20 years. The long list caused some people to find a way to go for Hajj including manipulation of citizenship documents, such as using passport of other countries. In respond to this situation, the government tries to negotiate with the Saudi government to increase the Hajj quota for Indonesians. Another effort is borrowing the remaining quota of neighboring countries. There is also suggestion to close the Hajj registration for some time and the need to revise the Hajj Law.

ASSESSMENT OF REGIONAL EFFICIENCY IN CROATIA USING DATA ENVELOPMENT ANALYSIS

Directory of Open Access Journals (Sweden)

Danijela Rabar

2013-02-01

Full Text Available In this paper, regional efficiency of Croatian counties is measured in three-year period (2005-2007 using Data Envelopment Analysis (DEA. The set of inputs and outputs consists of seven socioeconomic indicators. Analysis is carried out using models with assumption of variable returns-to-scale. DEA identifies efficient counties as benchmark members and inefficient counties that are analyzed in detail to determine the sources and the amounts of their inefficiency in each source. To enable proper monitoring of development dynamics, window analysis is applied. Based on the results, guidelines for implementing necessary improvements to achieve efficiency are given. Analysis reveals great disparities among counties. In order to alleviate naturally, historically and politically conditioned unequal county positions over which economic policy makers do not have total control, categorical approach is introduced as an extension to the basic DEA models. This approach, combined with window analysis, changes relations among efficiency scores in favor of continental counties.

The implementation of the Common Assessment Framework in the assessment of administrative and efficiency of nursing service in General Hospital of island region.

Directory of Open Access Journals (Sweden)

Apostolos Efkarpidis

2017-10-01

Full Text Available Introduction: The Common Assessment Framework (CAF is an easy to use tool of Total Quality Management (TQM which is available to the public sector organizations in Europe. The Common Assessment Framework applied every two years providing a self-assessment framework to organizations, conceptually similar with the European Foundation Quality Management, taking into account their differences. It is common for all public organizations ensuring the comparability of results between similar services. Objective: To measure the existing administrative and operational level of Nursing Service in General Hospital. Methodology: The study was authorized by the General Manager of the Hospital. We followed the steps of the procedure provided the Implementation Guide of the CAF and used the questionnaire of the Guide. The sample consisted of 32 employees (Self-Assessment Group of all categories in a total of 101 employees. The analysis was performed with the Excel program. Results: The results of the evaluation were initiated between two rating scales based on the average (50 points a of the scale with grades from 31 to 50 (below average indicating the relative satisfaction for some activity and the moderate level of efficiency and effectiveness, and b of the scale with grades from 51 to 70 (above average indicating satisfaction for some activity and the good level of efficiency and effectiveness. The rating on the nine criteria of the CAF were: 1 Leadership (57.36, 2 Strategy – Planning (44.1, 3 Human Resource Management (50.07, 4 Partnerships – Resources (41,18, 5 Process Management – Changes (30.04, 6 Results for the Citizen (49.17, 7 Results for the Human Resources (42.13, 8 Results in Society (53, 97, 9 Main results (53,78. Conclusions: Τhe Nursing Service of the General Hospital was evaluated for its administration as well as the organizational performance by staff and citizens, based on the CAF. Seventy two weak points were spoted needing

Walking the Spiritual Ways – West of Ireland experience of modern pilgrimage

Directory of Open Access Journals (Sweden)

Rosemary Power

2015-07-01

Full Text Available This paper considers the modern phenomenon of pilgrim walking along routes in the west of Ireland county of Clare. It relates it to possible medieval practice; to traditional practices by local people on one hand and the reconstruction of the international medieval pilgrim routes to places like Compostela. It suggests the reasons why people may walk in search of spiritual growth and experience, the resources they may wish for, the ways in which the contemporary search functions in a largely post-Catholic manner, and the position of those from other Christina, or religious traditions

Efficiency using computer simulation of Reverse Threshold Model Theory on assessing a “One Laptop Per Child” computer versus desktop computer

Directory of Open Access Journals (Sweden)

Supat Faarungsang

2017-04-01

Full Text Available The Reverse Threshold Model Theory (RTMT model was introduced based on limiting factor concepts, but its efficiency compared to the Conventional Model (CM has not been published. This investigation assessed the efficiency of RTMT compared to CM using computer simulation on the “One Laptop Per Child” computer and a desktop computer. Based on probability values, it was found that RTMT was more efficient than CM among eight treatment combinations and an earlier study verified that RTMT gives complete elimination of random error. Furthermore, RTMT has several advantages over CM and is therefore proposed to be applied to most research data.

METHODICAL APPROACHES TO ASSESSMENT OF EFFICIENCY OF INVESTMENT PROJECTS OF DEVELOPMENT OF RURAL TERRITORIES

Directory of Open Access Journals (Sweden)

Nadejda Shatsilo

2018-05-01

Full Text Available The purpose is to justify the principles of assessing the effectiveness of innovation and investment projects of rural areas development on the basis of sustainability. Research methodology. In the course of the research general scientific and special methods for solving the tasks and obtaining the corresponding results were used, in particular: the method of logical analysis - in determining the factors of influence on the efficiency of investment projects; Systematization and generalization - in the synthesis of modern methodological approaches to the evaluation of innovation and investment projects of rural areas development; Abstract-logical - for theoretical generalizations and formulation of the findings of the study. Results.The principles of estimation of efficiency of innovative-investment projects are generalized. The interrelation and interdependence of goals and tasks in the development of three subsystems of sustainability have been studied, which need to be taken into account when identifying the effects arising from the implementation of investment projects. The methodological principles of evaluation of innovation-investment projects of rural areas development in conditions of observance of the requirements of sustainable development are highlighted. The deterrent factors hindering the implementation of the processes of investment of investment resources in the development of rural areas are determined. The principles of implementation of investment projects oriented on sustainable development are substantiated. Priority directions of investing resources investment in the development of rural areas on the principles of sustainability within the framework of solving economic, social and environmental problems have been identified. The mechanism of estimation of efficiency of innovative-investment project of development of rural territory in the conditions of limited financial resources is offered. It is substantiated that it is

Main factors of efficiency of automated radiographic complex

International Nuclear Information System (INIS)

Akopov, V.S.; Voronin, S.A.; Grachev, A.V.; Golenishchev, I.A.; Majorov, A.N.; Meshalkin, I.A.

1978-01-01

The amount of work providing an assessment of the efficiency of a complex for automatized radiographic control is considered. The technique involves four stages. An analysis was performed to ascertain the efficiency of control of flaw detectability with regard to each of the stages of radiographic control. The relationships used in determining control efficiency and cited in the paper serve as a foundation for optimizing the technical parameters of the devices of the automatized complex and for creating calculation methods for generalized assessments of the efficiency of radiographic control

Energy Efficiency Indicators Methodology Booklet

Energy Technology Data Exchange (ETDEWEB)

Sathaye, Jayant; Price, Lynn; McNeil, Michael; de la rue du Can, Stephane

2010-05-01

This Methodology Booklet provides a comprehensive review and methodology guiding principles for constructing energy efficiency indicators, with illustrative examples of application to individual countries. It reviews work done by international agencies and national government in constructing meaningful energy efficiency indicators that help policy makers to assess changes in energy efficiency over time. Building on past OECD experience and best practices, and the knowledge of these countries' institutions, relevant sources of information to construct an energy indicator database are identified. A framework based on levels of hierarchy of indicators -- spanning from aggregate, macro level to disaggregated end-use level metrics -- is presented to help shape the understanding of assessing energy efficiency. In each sector of activity: industry, commercial, residential, agriculture and transport, indicators are presented and recommendations to distinguish the different factors affecting energy use are highlighted. The methodology booklet addresses specifically issues that are relevant to developing indicators where activity is a major factor driving energy demand. A companion spreadsheet tool is available upon request.

The application of DEA (Data Envelopment Analysis) window analysis in the assessment of influence on operational efficiencies after the establishment of branched hospitals.

Science.gov (United States)

Jia, Tongying; Yuan, Huiyun

2017-04-12

Many large-scaled public hospitals have established branched hospitals in China. This study is to provide evidence for strategy making on the management and development of multi-branched hospitals by evaluating and comparing the operational efficiencies of different hospitals before and after their establishment of branched hospitals. DEA (Data Envelopment Analysis) window analysis was performed on a 7-year data pool from five public hospitals provided by health authorities and institutional surveys. The operational efficiencies of sample hospitals measured in this study (including technical efficiency, pure technical efficiency and scale efficiency) had overall trends towards increase during this 7-year period of time, however, a temporary downturn occurred shortly after the establishment of branched hospitals; pure technical efficiency contributed more to the improvement of technical efficiency compared to scale efficiency. The establishment of branched-hospitals did not lead to a long-term negative effect on hospital operational efficiencies. Our data indicated the importance of improving scale efficiency via the optimization of organizational management, as well as the advantage of a different form of branch-establishment, merging and reorganization. This study brought an insight into the practical application of DEA window analysis on the assessment of hospital operational efficiencies.

ASSESSMENT OF EFFICIENCY OF APPLICATION OF TOOLS OF CARRYING OUT THE ALL-RUSSIAN POPULATION CENSUS OF 2020

Directory of Open Access Journals (Sweden)

Oleg V. Manzhula

2014-01-01

Full Text Available At a stage of preparation for the All-Russian population census of 2020 it is necessary to develop methodical and technological support of processes of carrying out census for increase of reliability of data collection and quality of information processing of population census of the Russian Federation with use of modern information and communication technologies, and also a technique of an assessment of efficiency of application of tools of carrying out census

Assessment of thermal efficiency of heat recovery coke making

Science.gov (United States)

Tiwari, H. P.; Saxena, V. K.; Haldar, S. K.; Sriramoju, S. K.

2017-08-01

The heat recovery stamp charge coke making process is quite complicated due to the evolved volatile matter during coking, is partially combusted in oven crown and sole flue in a controlled manner to provide heat for producing metallurgical coke. Therefore, the control and efficient utilization of heat in the oven crown, and sole flue is difficult, which directly affects the operational efficiency. Considering the complexity and importance of thermal efficiency, evolution of different gases, combustion of gasses in oven crown and sole flue, and heating process of coke oven has been studied. A nonlinear regression methodology was used to predict temperature profile of different depth of coal cake during the coking. It was observed that the predicted temperature profile is in good agreement with the actual temperature profile (R2 = 0.98) and is validated with the actual temperature profile of other ovens. A complete study is being done to calculate the material balance, heat balance, and heat losses. This gives an overall understanding of heat flow which affects the heat penetration into the coal cake. The study confirms that 60% heat was utilized during coking.

Assessing the Efficiency of Small-Scale and Bottom Trawler Vessels in Greece

Directory of Open Access Journals (Sweden)

Dario Pinello

2016-07-01

Full Text Available This study explores the technical and scale efficiency of two types of Greek fishing vessels, small-scale vessels and bottom trawlers, using a bias-corrected input-oriented Data Envelopment Analysis model. Moreover, the associations between efficiency scores and vessel’s and skipper’s characteristics are also explored. The results indicate that small-scale vessels achieve a very low average technical efficiency score (0.42 but a much higher scale efficiency score (0.81. Conversely, bottom trawlers achieve lower scale but higher technical efficiency scores (0.68 and 0.73, respectively. One important finding of this study is that the technical efficiency of small-scale vessels, in contrast to trawlers, is positively associated with the experience of the skipper. In a looser context, it can be said that small-scale fisheries mainly rely on skill, whereas bottom trawlers rely more on technology. This study concludes that there is space for improvement in efficiency, mainly for small-scale vessels, which could allow the achievement of the same level of output by using reduced inputs.

Hubungan Shalat Fardu Berjamaah Dengan Kecerdasan Emosional Pada Jamaah Mesjid Al Jihad Banjarmasin

Directory of Open Access Journals (Sweden)

Ahmad Jauhari

2017-05-01

Full Text Available Al Jihad  Mosque Banjarmasin is a mosque that is identical with Muhammadiyah, this mosque is followed by many pilgrims and loyal at the time of the implementation of prayers fardu congregation. Jamaah consists of various groups regardless of background, both in terms of age, economy, organization and even the sick pilgrims (post-stroke are actively involved in congregation. Active Jamaat prayers in congregation do not only come from residents around the mosque complex, but also many pilgrims who come from outside the mosque complex, even the distance difference between their residence with the mosque a few kilometers. In heavy rainy weather conditions, they still enthusiastically follow the prayers in congregation fardu mosque. In addition, there are things that are felt by pilgrims such as comfort, tranquility of heart and mind, emotional stability, silaturrahim which all is related to emotional intelligence. In this study, the main problem is how is the relationship of prayer in congregation with emotional intelligence in the congregation of Al Jihad Mosque Banjarmasin ?. The method used is quantitative and qualitative descriptive method with methodological arrangement such as approach and type of research, research location, population and sample, data and data source, procedure and data collection, quantitative and qualitative technical data analysis. The result of the study found that there is a correlation between salat fardu congregation with emotional intelligence, this is proved by the data from questionnaires from 30 pilgrims (respondents that is: able to control the impulse of worldly lusts with the highest opinion is 60% said yes and 40% stated sometimes .Motivating yourself with the highest opinion is 90% states yes and 10% states sometimes. Able to survive in the face of trials with the highest opinion is 86.67 states yes and 13, 33 states sometimes. No exaggeration with the highest opinion is 90% states yes and 10% states

KARIER MENINGITIS MENINGOKOK PADA JEMAAH HAJI INDONESIA TAHUN 1993-2003

Directory of Open Access Journals (Sweden)

Sarwo Handayani

2012-10-01

Full Text Available Research and routine survey of meningococcal meningitis on Indonesian hajj pilgrims have been conducted since 1993 until now. This paper consists of several research and routine survey of meningococcal meningitis during 1993 and 2003. The objectives of the test were determining the meningococcal meningitis carrier on hajj pilgrims, determining the serogroup of N. meningitidis and knowing sensitivity of bacteria to several antibiotics. The result showed increasing of meningococcal meningitis carrier in 1993 up to 1996, that was 1.3% - 9,4% respectively. This proportion of meningococcal meningitis carrier in the case groups decreased after given of rifampicin in 1994 and cyprofloxacin in 1997 as a chemoprophilactic. The result of the study in 1997 indiciated that the carrier rate of groups with cyprofloxacin (1.4% was lower than rifampicin group (1.4%. Most of the isolated bacteria of N. meningitidis in 1996 and 1997 were resistant to rifampicin (sensitivity test was 0-33%. Serogroup B of N. meningitidis were found dominantly between 1993 and 1999, it changed to be serogroup W135 from 2000 to 2003. The changes related  with the majority cases of meningococcal meningitis in another countries that caused by serogroup W135. Because  of  that  since 2002, immunization program has given a tetravalen (serogroup ACYW135 meningococcal vaccine to all of Indonesian hajj pilgrims. The carrier of meningococcal meningitis is still found in hajj pilgrims and their contact. More attention must be given, caused of meningococcal meningitis serogroup B vaccine is not available. The further researches are needed especially for subtype of N. meningitidis, effectivity of the drug choice and development of meningococcal meningitis vaccine serogroup B.

PELAKSANAAN PEMBIAYAAN DANA TALANGAN HAJI PADA PERBANKAN SYARIAH

Directory of Open Access Journals (Sweden)

Erni Susana

2017-03-01

Full Text Available The syariah banking activity was basically the expansion of banking service for people who needed it andexpected the repayment which was not based on interest rate, but based on syariah as what determined inIslamic law. To help people to get pilgrim portion soon, syahriah banking offered agreement which was usedin financing pilgrim lending fund like al-qardh agreement and al-ijarah (ujroh system. The aim of thisresearch was to analyze financing using al-qardh agreement and al-ijarah (ujroh system agreement. Al-qardhwas giving wealth to other people that could be collected back or asked for, or in other words lending withoutexpecting repayment, while the meaning of al-ijarah agreement was an agreement of moving the use or utilizationright on goods and service, through rent payment or ujroh without being followed by transferringownership. The implementation of financing pilgrim lending fund conformed to the rule of financing pilgrimarrangement which was written in Fatwa (a binding ruling in religious matters DSN No. 29/DSN-MUI/VI/2002. The amount of al-ijarah repayment was not based on the amount of lending al-qardh given to thecustomers.

78 FR 8444 - Energy Efficiency and Conservation Loan Program Programmatic Environmental Assessment

Science.gov (United States)

2013-02-06

... DEPARTMENT OF AGRICULTURE Rural Utilities Service 7 CFR Part 1710 Energy Efficiency and... new program that will implement the Energy Efficiency and Conservation Loan Program (EE). The PEA is... 12 to authorize energy audits and energy efficiency measures and devices to reduce demand on electric...

Productivity benefits of industrial energy efficiency measures

Energy Technology Data Exchange (ETDEWEB)

Worrell, Ernst; Laitner, John A.; Michael, Ruth; Finman, Hodayah

2004-08-30

We review the relationship between energy efficiency improvement measures and productivity in industry. We review over 70 industrial case studies from widely available published databases, followed by an analysis of the representation of productivity benefits in energy modeling. We propose a method to include productivity benefits in the economic assessment of the potential for energy efficiency improvement. The case-study review suggests that energy efficiency investments can provide a significant boost to overall productivity within industry. If this relationship holds, the description of energy-efficient technologies as opportunities for larger productivity improvements has significant implications for conventional economic assessments. The paper explores the implications this change in perspective on the evaluation of energy-efficient technologies for a study of the iron and steel industry in the US. This examination shows that including productivity benefits explicitly in the modeling parameters would double the cost-effective potential for energy efficiency improvement, compared to an analysis excluding those benefits. We provide suggestions for future research in this important area.

Energy efficiency in transport and mobility from an eco-efficiency viewpoint

International Nuclear Information System (INIS)

Uson, Alfonso Aranda; Capilla, Antonio Valero; Bribian, Ignacio Zabalza; Scarpellini, Sabina; Sastresa, Eva Llera

2011-01-01

European Union countries' current energy policies for the transport sector promote, amongst other initiatives; urban mobility plans, the renewal of fleets of cars and industrial vehicles and the introduction of biofuel. From the point of view of eco-efficiency and Life Cycle Assessment (LCA), energy policies must go further. The objective of this paper is to analyse the current transport model and the policies on energy efficiency being promoted in the EU from a LCA point of view. Special attention has been paid to private vehicles, in assessing the environmental impact of the various stages of manufacture, their use and disposal, and the consequences of plans to renew fleets. How old should a vehicle ideally be so that when it is changed, the embodied energy in the materials of the vehicle is less than the gain in energy efficiency due to changing the model for example? In addition the paper analyses the different means of transport in the energy consumption-time ratio from a LCA viewpoint. The fact that reducing transport times leads to greater energy consumption gives rise to the question: how long does nature take to repair the environmental damage caused?

Technical evidence for assessing the performance of markets affecting energy efficiency

International Nuclear Information System (INIS)

Koomey, J.G.; Sanstad, A.H.

1994-01-01

This paper focuses on the empirical basis for skepticism about the effectiveness of the market mechanism in promoting cost-effective energy efficiency improvements. It presents a framework for evaluating engineering economic evidence on the diffusion of energy-efficiency improvements, and then presents a series of examples within this framework that provide evidence for the existence of market imperfections related to energy efficiency. It concludes with a challenge to economists, policy analysts, and technologists to take this empirical evidence seriously and sponsor further collaborative research in this area. (author)

Respiratory tract infection during Hajj

Directory of Open Access Journals (Sweden)

Alzeer Abdulaziz

2009-01-01

Full Text Available Respiratory tract infection during Hajj (pilgrimage to Mecca is a common illness, and it is responsible for most of the hospital admissions. Influenza virus is the leading cause of upper respiratory tract infection during Hajj, and pneumonia can be serious. Taking into account the close contacts among the pilgrims, as well as the crowding, the potential for transmission of M. tuberculosis is expected to be high. These pilgrims can be a source for spreading infection on their return home. Although vaccination program for influenza is implemented, its efficacy is uncertain in this religious season. Future studies should concentrate on prevention and mitigation of these infections.

Formosa Plastics Corporation: Plant-Wide Assessment of Texas Plant Identifies Opportunities for Improving Process Efficiency and Reducing Energy Costs

Energy Technology Data Exchange (ETDEWEB)

None

2005-01-01

At Formosa Plastics Corporation's plant in Point Comfort, Texas, a plant-wide assessment team analyzed process energy requirements, reviewed new technologies for applicability, and found ways to improve the plant's energy efficiency. The assessment team identified the energy requirements of each process and compared actual energy consumption with theoretical process requirements. The team estimated that total annual energy savings would be about 115,000 MBtu for natural gas and nearly 14 million kWh for electricity if the plant makes several improvements, which include upgrading the gas compressor impeller, improving the vent blower system, and recovering steam condensate for reuse. Total annual cost savings could be $1.5 million. The U.S. Department of Energy's Industrial Technologies Program cosponsored this assessment.

Energy Efficiency Collaboratives

Energy Technology Data Exchange (ETDEWEB)

Li, Michael [US Department of Energy, Washington, DC (United States); Bryson, Joe [US Environmental Protection Agency, Washington, DC (United States)

2015-09-01

Collaboratives for energy efficiency have a long and successful history and are currently used, in some form, in more than half of the states. Historically, many state utility commissions have used some form of collaborative group process to resolve complex issues that emerge during a rate proceeding. Rather than debate the issues through the formality of a commission proceeding, disagreeing parties are sent to discuss issues in a less-formal setting and bring back resolutions to the commission. Energy efficiency collaboratives take this concept and apply it specifically to energy efficiency programs—often in anticipation of future issues as opposed to reacting to a present disagreement. Energy efficiency collaboratives can operate long term and can address the full suite of issues associated with designing, implementing, and improving energy efficiency programs. Collaboratives can be useful to gather stakeholder input on changing program budgets and program changes in response to performance or market shifts, as well as to provide continuity while regulators come and go, identify additional energy efficiency opportunities and innovations, assess the role of energy efficiency in new regulatory contexts, and draw on lessons learned and best practices from a diverse group. Details about specific collaboratives in the United States are in the appendix to this guide. Collectively, they demonstrate the value of collaborative stakeholder processes in producing successful energy efficiency programs.

Impact Assessment of the Energy Efficiency Directive (2012/27/E U) for the Energy Community

International Nuclear Information System (INIS)

2014-07-01

The Ministerial Council of the Energy Community has proposed implementation of Directive 2012127|E U, in each Contracting Party, but with certain modifications 1 . Therefore, this study was commissioned to assess the costs and benefits of implementing four specific elements of the Energy Efficiency Directive (EED) as modified for the Energy Community (En C) Contracting Parties 2 (C Ps) and to provide a basis for justification of proposed changes to particular articles within the Directive as it relates to the C Ps. The study assessed the following four articles: Task 1 - National Targets - Article 3; Task 2 - Exemplary role of public bodies' buildings - Article 5; Task 3 - Energy efficiency obligation schemes - Article 7, and Task 4 - Promotion of efficiency in heating and cooling - Article 14. The study conclusions and recommendations, which are based upon the best available data and assumptions regarding the cost, performance and availability of energy efficient devices in each sector, are summarized below: 1. Implementation of the EED is shown to be feasible for the C Ps, but the level of the target can have a significant impact on the cost. The E E Target 18-25% case is recommended for adoption because it the most cost-effective of the three options, and sharp increases in the required investment costs, especially in 2027 and 2030, for the E E Target 19-27% and E E Target 20-30% cases do not justify the associated incremental energy savings. The E E Target 18-25% levels are shown to be an achievable significant progression of ambition for each of the C Ps. 2. Renovation of central government buildings is beneficial for the C Ps, but government ownership is still too large in comparison to E U member states. Therefore, the 2% goal is recommended as being the most appropriate approach for the C Ps to achieve the goal of a government implemented demonstration program in its own buildings as example for other public and private sector entities to follow suit. 3

Feedback and efficient behavior.

Directory of Open Access Journals (Sweden)

Sandro Casal

Full Text Available Feedback is an effective tool for promoting efficient behavior: it enhances individuals' awareness of choice consequences in complex settings. Our study aims to isolate the mechanisms underlying the effects of feedback on achieving efficient behavior in a controlled environment. We design a laboratory experiment in which individuals are not aware of the consequences of different alternatives and, thus, cannot easily identify the efficient ones. We introduce feedback as a mechanism to enhance the awareness of consequences and to stimulate exploration and search for efficient alternatives. We assess the efficacy of three different types of intervention: provision of social information, manipulation of the frequency, and framing of feedback. We find that feedback is most effective when it is framed in terms of losses, that it reduces efficiency when it includes information about inefficient peers' behavior, and that a lower frequency of feedback does not disrupt efficiency. By quantifying the effect of different types of feedback, our study suggests useful insights for policymakers.

Assessing the efficiency of Wolbachia driven Aedes mosquito suppression by delay differential equations.

Science.gov (United States)

Huang, Mugen; Luo, Jiaowan; Hu, Linchao; Zheng, Bo; Yu, Jianshe

2017-12-14

To suppress wild population of Aedes mosquitoes, the primary transmission vector of life-threatening diseases such as dengue, malaria, and Zika, an innovative strategy is to release male mosquitoes carrying the bacterium Wolbachia into natural areas to drive female sterility by cytoplasmic incompatibility. We develop a model of delay differential equations, incorporating the strong density restriction in the larval stage, to assess the delicate impact of life table parameters on suppression efficiency. Through mathematical analysis, we find the sufficient and necessary condition for global stability of the complete suppression state. This condition, combined with the experimental data for Aedes albopictus population in Guangzhou, helps us predict a large range of releasing intensities for suppression success. In particular, we find that if the number of released infected males is no less than four times the number of mosquitoes in wild areas, then the mosquito density in the peak season can be reduced by 95%. We introduce an index to quantify the dependence of suppression efficiency on parameters. The invariance of some quantitative properties of the index values under various perturbations of the same parameter justifies the applicability of this index, and the robustness of our modeling approach. The index yields a ranking of the sensitivity of all parameters, among which the adult mortality has the highest sensitivity and is considerably more sensitive than the natural larvae mortality. Copyright © 2017 Elsevier Ltd. All rights reserved.

Assessing the efficiency of a coastal Managed Aquifer Recharge (MAR) system in Cyprus.

Science.gov (United States)

Tzoraki, Ourania; Dokou, Zoi; Christodoulou, George; Gaganis, Petros; Karatzas, George

2018-06-01

Managed Aquifer Recharge (MAR) is becoming an attractive water management option, with more than 223 sites operating in European countries. The quality of the produced water, available for drinking or irrigation processes is strongly depended on the aquifer's hydrogeochemical characteristics and on the MAR system design and operation. The objective of this project is the assessment of the operation efficiency of a MAR system in Cyprus. The coupling of alternative methodologies is used such as water quality monitoring, micro-scale sediment sorption experiments, simulation of groundwater flow and phosphate and copper transport in the subsurface using the FEFLOW model and evaluation of the observed change in the chemical composition of water due to mixing using the geochemical model PHREEQC. The above methodology is tested in the Ezousa MAR project in Cyprus, where treated effluent from the Paphos Waste Water Treatment Plant, is recharged into the aquifer through five sets of artificial ponds along the riverbed. Additionally, groundwater is pumped for irrigation purposes from wells located nearby. A slight attenuation of nutrients is observed, whereas copper in groundwater is overcoming the EPA standards. The FEFLOW simulations reveal no effective mixing in some intermediate infiltration ponds, which is validated by the inverse modeling simulation of the PHREEQC model. Based on the results, better control of the infiltration capacity of some of the ponds and increased travel times are some suggestions that could improve the efficiency of the system. Copyright © 2018 Elsevier B.V. All rights reserved.

Quantitative assessment of in-solution digestion efficiency identifies optimal protocols for unbiased protein analysis

DEFF Research Database (Denmark)

Leon, Ileana R; Schwämmle, Veit; Jensen, Ole N

2013-01-01

a combination of qualitative and quantitative LC-MS/MS methods and statistical data analysis. In contrast to previous studies we employed both standard qualitative as well as data-independent quantitative workflows to systematically assess trypsin digestion efficiency and bias using mitochondrial protein...... conditions (buffer, RapiGest, deoxycholate, urea), and two methods for removal of detergents prior to analysis of peptides (acid precipitation or phase separation with ethyl acetate). Our data-independent quantitative LC-MS/MS workflow quantified over 3700 distinct peptides with 96% completeness between all...... protocols and replicates, with an average 40% protein sequence coverage and an average of 11 peptides identified per protein. Systematic quantitative and statistical analysis of physicochemical parameters demonstrated that deoxycholate-assisted in-solution digestion combined with phase transfer allows...

Efficiency of cleaning and disinfection of surfaces: correlation between assessment methods

Directory of Open Access Journals (Sweden)

Oleci Pereira Frota

Full Text Available ABSTRACT Objective: to assess the correlation among the ATP-bioluminescence assay, visual inspection and microbiological culture in monitoring the efficiency of cleaning and disinfection (C&D of high-touch clinical surfaces (HTCS in a walk-in emergency care unit. Method: a prospective and comparative study was carried out from March to June 2015, in which five HTCS were sampled before and after C&D by means of the three methods. The HTCS were considered dirty when dust, waste, humidity and stains were detected in visual inspection; when ≥2.5 colony forming units per cm2 were found in culture; when ≥5 relative light units per cm2 were found at the ATP-bioluminescence assay. Results: 720 analyses were performed, 240 per method. The overall rates of clean surfaces per visual inspection, culture and ATP-bioluminescence assay were 8.3%, 20.8% and 44.2% before C&D, and 92.5%, 50% and 84.2% after C&D, respectively (p<0.001. There were only occasional statistically significant relationships between methods. Conclusion: the methods did not present a good correlation, neither quantitative nor qualitatively.

75 FR 11205 - Entergy Nuclear Operations, Inc; Pilgrim Nuclear Power Station Environmental Assessment and...

Science.gov (United States)

2010-03-10

... exposures to plant workers and members of the public. Therefore, no changes or different types of... impacts to historical and cultural resources. There would be no impact to socioeconomic resources...

Tourism Assessment of Roman-Catholic Sacral Objects Using Analytical Hierarchy Process (Ahp – Case Study of Novi Sad, Petrovaradin and Sremska Kamenica

Directory of Open Access Journals (Sweden)

Igor Stamenković

2014-10-01

Full Text Available Because of its geopolitical and tourist location and because of its ethnic composition, Novi Sad is known as one cosmopolitan city that grew to become the place of gathering and dialogue of many nations, cultures and religious communities. No matter if they are believers, agnostics, atheists, pilgrims, city tourists, travelling through or are the inhabitants, young, middle-aged or retired, all beneficent people can find here all the necessary information written on the account of rich religious and historical sources. The subject of this paper is the tourist valorization of the eight most attractive Roman-Catholic sacred objects in Novi Sad, Petrovaradin and Sremska Kamenica. In this paper the analyzed cultural and religious assets represent alternatives while indicators of the quantitative-qualitative method of assessment of cultural sites are used as criteria. And AHP gradually compares alternatives according to chosen criterion and measures their impact on the goal, which helps man to make the right decision. From the results of the assessment of the analyzed sacred objects The Name of Mary Church with Catholic churchyard and Vicarage – Novi Sad is ranked as the most attractive site. Then, in second place is the Franciscan converts St. George the Martyr – Petrovaradin, followed by The Church of Snežna Gospa in Tekije – Petrovaradin.

Initial growth and yield structure of selected cultivars of cranberry (Vaccinium macrocarpon Ait. cultivated on mineral soils

Directory of Open Access Journals (Sweden)

Szwonek Eugeniusz

2016-06-01

Full Text Available A study was conducted to evaluate the possibility of cranberry cultivation on mineral soils and to assess the influence of vegetative biomass development, generative growth and yield components on the yielding of three cranberry cultivars originating in the USA (Stevens, Pilgrim and Ben Lear at two locations in Poland. The key biometrical traits involved in yield formation were taken into account, and the soil and plant chemical conditions were evaluated. All of the measured biometrical characteristics were strongly influenced by the location and the year of cultivation, and varietal differences were also noted. The most important determinants that explained yield variation were: the number of uprights per square meter, floral induction and berry set. However, the participation of each component in yield variation was strongly affected by the location, age of plantation and to a minor extent by the cultivar. The study confirmed the possibility of cranberry cultivation on mineral soils with a low pH. The biggest average yield of the three years was collected from cv. Stevens as cultivated on sandy soil in contrast to the same cultivar grown on sandy loam soil. In the case of sandy loam soil after acidification, cv. Pilgrim appeared to be a relatively better yielding cultivar.

Research on the Renewable Energy Industry Financing Efficiency Assessment and Mode Selection

Directory of Open Access Journals (Sweden)

Xiaohuan Lyu

2018-01-01

Full Text Available In recent years, environmental issues are attracting widespread attention by various countries around the world. In this context, the renewable energy industry has become a stimulus point for economic development and has great potential for development. Renewable energy industry financing is difficult due to its characteristics of high risk and long-term investment returns, and relying on existing financing channels make it present a glut of excess capacity. It is key to realize resource optimal allocation, solve overcapacity phenomenon and select the valid financing mode. This paper used Bloomberg New Energy Finance (BNEF data and the data envelopment analysis (DEA method to analyze the financing efficiency different parts of the global renewable energy industry and different ways of financing. It could be found that although the financing efficiency showed a trend of increasing year by year, the financing efficiency of each industry presented generally weak DEA efficiency, the comprehensive financing efficiency of wind power industry was higher. The article also found that the financing efficiency of project financing and Research and Development (R&D were relatively high, and the equity market and venture capital and private equity were less efficient. The results of this paper play an important role in the overall financing status cognizance of the renewable energy industry and give suggestions about valid financing mode choice.

Critical assessment of efficiency of immediate intervention

International Nuclear Information System (INIS)

Romanenko, A.E.

1996-01-01

Critical analysis is given in this report on measures conducted after the Chernobyl NPP accident of provision of health care of inhabitants of suffered areas. Among shortages of the first stage of the accident it is pointed out: lack of modem instruments, dispersion of establishmental forces and means and dyscoordination of actions of different establishments having taken part in the accident elimination, excessive confidentiality, insufficient level of knowledge in the field of radiation medicine, low efficiency of radio protection measures, in particular, iodine prophylaxis. Thyroid irradiation doses were not taken into account in full measure for decision making about evacuation

A novel device for hazardous substances degradation based on double-cavitating-jets impingement: Parameters optimization and efficiency assessment.

Science.gov (United States)

Tao, Yuequn; Cai, Jun; Huai, Xiulan; Liu, Bin

2017-08-05

Hydrodynamic cavitation is an effective advanced oxidation process. But sometimes it cannot obtain satisfactory treatment efficiency by using hydrodynamic cavitation individually, so it is necessary to introduce intensive methods. Based on double-cavitating-jets impingement, this paper presents a novel device that has advantages of strong heat and mass transfer and efficient chemical reactions. Based on the device, a series of experimental investigations on degradation of a basic dye, i.e. Rhodamine B were carried out. Significant Rhodamine B removal from aqueous solution was observed during 2h treatment and the degradation reaction conformed to pseudo-first-order kinetics. The synergetic effects between double-cavitating-jets impingement and Fenton chemistry on simultaneous degradation of Rhodamine B were confirmed. Both single-variable experiments and orthogonal experiments were carried out to study the effects of initial hydrogen peroxide, ferrous sulfate and Rhodamine B concentrations and the optimum conditions were found out. Effects of jet inlet pressure in the range of 6-12MPa and solution pH value in the range of 2-8 were also investigated. The cavitation yield was evaluated to assess the energy efficiency. The present treatment scheme showed advantages in terms of reducing the demand of hydrogen peroxide concentration and enhancing the treatment efficiency in large scale operation. Copyright © 2017 Elsevier B.V. All rights reserved.

THE EFFICIENCY OF TENNIS DOUBLES SCORING SYSTEMS

Directory of Open Access Journals (Sweden)

Geoff Pollard

2010-09-01

Full Text Available In this paper a family of scoring systems for tennis doubles for testing the hypothesis that pair A is better than pair B versus the alternative hypothesis that pair B is better than A, is established. This family or benchmark of scoring systems can be used as a benchmark against which the efficiency of any doubles scoring system can be assessed. Thus, the formula for the efficiency of any doubles scoring system is derived. As in tennis singles, one scoring system based on the play-the-loser structure is shown to be more efficient than the benchmark systems. An expression for the relative efficiency of two doubles scoring systems is derived. Thus, the relative efficiency of the various scoring systems presently used in doubles can be assessed. The methods of this paper can be extended to a match between two teams of 2, 4, 8, …doubles pairs, so that it is possible to establish a measure for the relative efficiency of the various systems used for tennis contests between teams of players.

Brain training for silver gamers: effects of age and game form on effectiveness, efficiency, self-assessment, and gameplay experience.

Science.gov (United States)

Nacke, Lennart E; Nacke, Anne; Lindley, Craig A

2009-10-01

In recent years, an aging demographic majority in the Western world has come to the attention of the game industry. The recently released "brain-training" games target this population, and research investigating gameplay experience of the elderly using this game form is lacking. This study employs a 2 x 2 mixed factorial design (age group: young and old x game form: paper and Nintendo DS) to investigate effects of age and game form on usability, self-assessment, and gameplay experience in a supervised field study. Effectiveness was evaluated in task completion time, efficiency as error rate, together with self-assessment measures (arousal, pleasure, dominance) and game experience (challenge, flow, competence, tension, positive and negative affect). Results indicate players, regardless of age, are more effective and efficient using pen-and-paper than using a Nintendo DS console. However, the game is more arousing and induces a heightened sense of flow in digital form for gamers of all ages. Logic problem-solving challenges within digital games may be associated with positive feelings for the elderly but with negative feelings for the young. Thus, digital logic-training games may provide positive gameplay experience for an aging Western civilization.

Energy efficient school buildings in central-western Argentina: an assessment of alternative typologies for the classroom tier

Energy Technology Data Exchange (ETDEWEB)

De Rosa, C.; Basso, M.; Fernandez, J.C. [Laboratorio de Ambiente Humano y Vivienda, Mendoza (AR)] [and others

2000-07-01

Four energy-efficient demonstration school buildings were built in the western province of Mendoza, Argentina, in 1999, as part of a massive building program required to implement the new Federal Education Plan. The buildings should make medium use of bioclimatic strategies and daylighting. The aspects of typology of the classroom tiers became immediately apparent as one of the main conditioners of the overall scheme. Three different alternative schemes were designed and built. A deeper analysis of these and other possible alternatives were thought essential for future constructions of the type. Four typologies of the classroom tier, using the same, locally available technology, are being comparatively assessed in the aspects of energy efficiently, thermal and luminous comfort, construction and operation costs and environmental impact (LCA). The paper presents the provisional results of the two first items only: energy efficiency and thermal comfort. While all four schemes evaluated are believed to be ''workable'', differences will tend to favour some the other according to context situations. Volumetric Loss Coeff. range from 1.09 to 1.24 W/Km{sup 3}. Solar savings fractions for the school operation hours vary between: 82.83 and 91.58%. Work is being continued to cover all the analysis items in a combined way. (author)

Understanding Cost-Effectiveness of Energy Efficiency Programs

Science.gov (United States)

Discusses the five standard tests used to assess the cost-effectiveness of energy efficiency, how states are using these tests, and how the tests can be used to determine the cost-effectiveness of energy efficiency measures.

Economic and Environmental Assessment of a 1 MW Grid Connected Rooftop Solar PV System for Energy Efficient Building in Bangladesh

Science.gov (United States)

Chakraborty, Sanjib; Hosain, Rubayet; Rahman, Toufiqur; Rabbi, Ahmead Fazle

This paper evaluates the potentiality of a 1 MW grid connected rooftop solar PV system for an Energy Efficient Building in Bangladesh, which was estimated by utilizing NASA SSE solar radiation data, PVsyst simulation software and RETScreen simulation software. Economic and environmental viability for a ten-storied building with roof area of 6,500 m2 in the Capital City of Bangladesh, Dhaka was assessed by using the RETScreen simulation software. The yearly electricity production of the proposed system was 1,581 MWh estimated by PVsyst where the technical prospective of gird-connected solar PV in Bangladesh was calculated as about 50,174 MW. The economic assessments were determined the simple payback in such a way that the generated electricity first fulfills the demand of the building, and then the rest of the energy is supplied to the grid. The result indicates that the roof top solar PV system for an Energy efficient building in Dhaka city has a favorable condition for development both in economic and environmental point of view.

Bottom-up Representation of Industrial Energy Efficiency Technologies in Integrated Assessment Models for the U.S. Pulp and Paper Sector

Energy Technology Data Exchange (ETDEWEB)

Xu, Tengfang [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sathaye, Jayant [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kramer, Klaas Jan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-07-01

Adoption of efficient end-use technologies is one of the key measures for reducing greenhouse gas (GHG) emissions. How to effectively analyze and manage the costs associated with GHG reductions becomes extremely important for the industry and policy makers around the world. Energy-climate (EC) models are often used for analyzing the costs of reducing GHG emissions for various emission-reduction measures, because an accurate estimation of these costs is critical for identifying and choosing optimal emission reduction measures, and for developing related policy options to accelerate market adoption and technology implementation. However, accuracies of assessing GHG-emission reduction costs by taking into account the adoption of energy efficiency technologies will depend on how well these end-use technologies are represented in integrated assessment models (IAM) and other energy-climate models. In this report, we first conduct a brief review of different representations of end-use technologies (mitigation measures) in various energy-climate models, followed by the problem statement, and a description of the basic concepts of quantifying the cost of conserved energy including integrating no-regrets options.

ASSESSMENT OF EFFICIENCY OF PSYCHOLOGICAL MECHANISMS OF INFLUENCE IN SOCIAL ADVERTISING

Directory of Open Access Journals (Sweden)

Tatiyana B. Kolyshkina

2014-12-01

Full Text Available The main aim of the research is to estimate the efficiency of psychological influence mechanisms in social advertising. Numerous psychological, sociological, culturological studies, devoted to this issue, do not answer the question which mechanisms will be efficient and will lead to the expected reaction of a recipient. The correlation between the psychological influence methods and the goals set by the creators is especially important for social advertising, because its efficiency can’t be measured by economic indicators as it occurs in commercial advertising. In addition, it should be remembered that for guaranteeing of efficiency in this kind of advertising one need to take into account such special features of a recipient as their beliefs and sets. The study concentrates on the comparison of psychological influence mechanisms, used in World Wildlife Fund (WWF social advertising. Its creators use a great number of methods. But as practice shows us by no means all of them lead to the planned results. The study justifies, that the efficiency of advertising influence should be estimated by such indicators as the willingness of a recipient to take part in WWF programs (conative component and their emotional response (affective component. Consequently, it has been established that the behaviour of a recipient does not depend on a chosen creative strategy’s type, which is used by the creators. The willingness of a recipient to take part in the programs, advertised by WWF, is estimated by the content of their social and psychological sets (attitudes. The displayed results prove that one need to refuse a cruel and shocking way of advertising, which causes people’s negative emotions. It is corroborated by experiments that social advertising which defends wild nature can be efficient on condition that it gives a recipient an opportunity to actualize their own social and psychological sets.

Potential Global Benefits of Improved Ceiling Fan Energy Efficiency

Energy Technology Data Exchange (ETDEWEB)

Sathaye, Nakul [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Phadke, Amol [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shah, Nihar [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Letschert, Virginie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-10-31

Ceiling fans contribute significantly to residential electricity consumption, both in an absolute sense and as a proportion of household consumption in many locations, especially in developing countries in warm climates. However, there has been little detailed assessment of the costs and benefits of efficiency improvement options for ceiling fans and the potential resulting electricity consumption and greenhouse gas (GHG) emissions reductions. We analyze the costs and benefits of several options to improve the efficiency of ceiling fans and assess the global potential for electricity savings and GHG emission reductions with more detailed assessments for India, China, and the U.S. We find that ceiling fan efficiency can be cost-effectively improved by at least 50% using commercially available technology. If these efficiency improvements are implemented in all ceiling fans sold by 2020, 70 terrawatt hours per year (TWh/year) could be saved and 25 million metric tons of carbon dioxide (CO2) emissions per year could be avoided, globally. We assess how policies and programs such as standards, labels, and financial incentives can be used to accelerate the adoption of efficient ceiling fans in order to realize this savings potential.

The International Database of Efficient Appliances (IDEA): A new tool to support appliance energy-efficiency deployment

International Nuclear Information System (INIS)

Gerke, Brian F.; McNeil, Michael A.; Tu, Thomas

2017-01-01

Highlights: •IDEA collects, organizes, and stores data on appliance features and efficiency. •Data can be gathered for any appliance type on any international market. •IDEA enables new approaches to efficiency deployment and monitoring. •Techniques are developed for cross-market comparison of energy-savings potential. •We find significant cost-effective energy-savings potential from efficiency for Indian and Chinese refrigerators. -- Abstract: Appliance energy-efficiency programs are a central component of many countries’ energy-policy portfolios. A major barrier to optimal implementation of these programs is lack of data to determine market baselines, assess the potential for cost-effective energy savings, and track markets over time to evaluate and verify program impacts. To address this gap, we have developed the International Database of Efficient Appliances (IDEA), a suite of software tools that automatically gathers data that is currently dispersed across various online sources and compiles it into a unified repository of information on efficiency, price, and features for a diversity of appliances and devices in markets around the world. In this article we describe the framework and functionality of IDEA, and we demonstrate its power as a resource for research and policy development related to appliance energy efficiency. Using IDEA data for refrigerators in China and India, we assess the potential for cost-effective energy savings within each market by computing robust indicators that can also be easily compared across different appliances and markets. We find that significant cost-effective savings are available on both markets. We discuss implications for the development of future energy-efficiency deployment programs.

Analyzing wind turbine directional behavior: SCADA data mining techniques for efficiency and power assessment

International Nuclear Information System (INIS)

Castellani, Francesco; Astolfi, Davide; Sdringola, Paolo; Proietti, Stefania; Terzi, Ludovico

2017-01-01

Highlights: • The directional behavior of four turbines of an onshore wind farm is investigated. • The positions of the nacelles are discretized to highlight clusterization effects. • The recurrent alignment patterns of the cluster are individuated and analyzed. • The patterns are studied by the point of view of efficiency and power output. • Significative performance deviations arise among the most frequent configurations. - Abstract: SCADA control systems are the keystone for reliable performance optimization of wind farms. Processing into knowledge the amount of information they spread is a challenging task, involving engineering, physics, statistics and computer science skills. This work deals with SCADA data analysis methods for assessing the importance of how wind turbines align in patterns to the wind direction. In particular it deals with the most common collective phenomenon causing clusters of turbines behaving as a whole, rather than as a collection of individuality: wake effects. The approach is based on the discretization of nacelle position measurements and subsequent post-processing through simple statistical methods. A cluster, severely affected by wakes, from an onshore wind farm, is selected as test case. The dominant alignment patterns of the cluster are identified and analyzed by the point of view of power output and efficiency. It is shown that non-trivial alignments with respect to the wind direction arise and important performance deviations occur among the most frequent configurations.

IMPROVING THE EFFECTIVENESS AND EFFICIENCY OF EVIDENCE PRODUCTION FOR HEALTH TECHNOLOGY ASSESSMENT.

Science.gov (United States)

Facey, Karen; Henshall, Chris; Sampietro-Colom, Laura; Thomas, Sarah

2015-01-01

Health Technology Assessment (HTA) needs to address the challenges posed by high cost, effective technologies, expedited regulatory approaches, and the opportunities provided by collaborative real-world evaluation of technologies. The Health Technology Assessment International (HTAi) Policy Forum met to consider these issues and the implications for evidence production to inform HTA. This paper shares their discussion to stimulate further debate. A background paper, presentations, group discussions, and stakeholder role play at the 2015 HTAi Policy Forum meeting informed this paper. HTA has an important role to play in helping improve evidence production and ensuring that the health service is ready to adopt effective technologies. It needs to move from simply informing health system decisions to also working actively to align stakeholder expectations about realistic evidence requirements. Processes to support dialogue over the health technology life cycle need to be developed that are mindful of limited resources, operate across jurisdictions and learn from past processes. Collaborations between health technology developers and health systems in different countries should be encouraged to develop evidence that will inform decision making. New analytical techniques emerging for real-world data should be harnessed to support modeling for HTA. A paradigm shift (to "Health Innovation System 2.0") is suggested where HTA adopts a more central, proactive role to support alignment within and amongst stakeholders over the whole life cycle of the technology. This could help ensure that evidence production is better aligned with patient and health system needs and so is more effective and efficient.

Energy efficiency and sustainability assessment of about 500 small and medium-sized enterprises in Central Europe region

International Nuclear Information System (INIS)

Viesi, Diego; Pozzar, Francesca; Federici, Alessandro; Crema, Luigi; Mahbub, Md Shahriar

2017-01-01

Nowadays more than 20 million small and medium-sized enterprises (SMEs) are located in the European Union (EU): they are a key driver for economic growth, innovation, employment and social integration. The first step towards better industrial energy and environmental performance is the acknowledgement of the savings potential that can be realized by the company ownership and management board. Following this goal, the CEEM (Central Environmental and Energy Management) project provided to about 500 Central Europe SMEs of 5 countries (Austria, the Czech Republic, Hungary, Italy and Slovenia) a user friendly and free of charge web tool called 3EMT (Eco Energy Efficiency Management Tool). Through a questionnaire the 3EMT analyzes and sums up eco-energy patterns, helps to self-assess the company environmental performance, benchmarks a company with other Central Europe’s enterprises, delivers a customized Assessment Report, suggests further services and facilities. In this paper, the large 3EMT database is analyzed, and statistics focused on SMEs eco-energy performance and future & innovation perspectives are presented and discussed. Furthermore, key challenges and key intervention points were defined by local stakeholders (policy makers, Energy Service Companies, SMEs representatives, researchers), this paper summarizes the main policy outcomes. - Highlights: • Evaluation of Central Europe SME performance in energy efficiency and sustainability. • Extension of SME statistics at European and national level. • Identification of key challenges and key interventions for new industrial policies.

Combining IPPC and emission trading: An assessment of energy efficiency and CO2 reduction potentials in the Austrian paper industry

International Nuclear Information System (INIS)

Starzer, Otto; Dworak, Oliver

2005-01-01

In the frame of an innovative project partnership E.V.A. - the Austrian Energy Agency accompanied the Austrian paper industry for the last 2.5 years in developing a branch specific climate change strategy. Within the scope of this project an assessment of the energy efficiency status of the branch was carried out as well as an evaluation of still realisable energy savings and CO 2 reduction potentials. The paper presents the methodology applied, which combines a top down approach (benchmarking and best practice) with a bottom up approach (on-site interviews and energy audits), supported by a huge data collection process. Within the benchmarking process all Austrian paper industry installations affected by the EU emission trading directive were benchmarked against their respective IPPC/BAT values. Furthermore an extensive list of best practice examples derived from existing or ongoing studies was compared with the energy efficiency measures already carried out by the companies ('early actions'). These theory-oriented findings were complemented by several on-site interviews with the respective energy managers as well as by detailed energy audits carried out by a consulting company, covering in total more than 80% of the Austrian paper industry's CO 2 emissions. The paper concludes with the main results of the project, presenting the pros and cons of working with IPPC documents and BAT values in terms of energy efficiency assessments. Recommendations are presented on how to improve the allocation exercise for the next emission trading period from 2008 to 2012

Assessment of energy efficiency project financing alternatives for Brookhaven National Laboratory

Energy Technology Data Exchange (ETDEWEB)

WDM Hunt; JC Hail; GP Sullivan

2000-03-13

Energy reduction goals for Federal agencies were first established in the National Energy Conservation Policy Act of 1988, and directed 10{percent} reduction in facility energy use based on a 1985 baseline. Since that time, Federal sites have been actively seeking and implementing a wide variety of energy-efficiency measures in facilities across the Federal sector. In the intervening years this energy reduction goal has been progressively increased to 20{percent} through legislation (Public Law 102-486, The Energy Policy Act of 1992) and a number of Executive Orders. Executive Order 13123, Greening the Government Through Efficient Energy management (signed June 3, 1999), further increased the facility energy-efficiency improvement goal from 30{percent} in 2005 to 35{percent} by 2010 relative to the 1985 baseline.

Mobilising Investment in Energy Efficiency

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

Taxes, loans and grants, trading schemes and white certificates, public procurement and investment in R&D or infrastructure: known collectively as 'economic instruments', these tools can be powerful means of mobilising the finances needed to achieve policy goals by implementing energy efficiency measures. The role of economic instruments is to kick-start the private financial markets and to motivate private investors to fund EE measures. They should reinforce and promote energy performance regulations. This IEA analysis addresses the fact that, to date, relatively little effort has been directed toward evaluating how well economic instruments work. Using the buildings sector to illustrate how such measures can support energy efficiency, this paper can help policy makers better select and design economic instruments appropriate to their policy objectives and national contexts. This report’s three main aims are to: 1) Examine how economic instruments are currently used in energy efficiency policy; 2) Consider how economic instruments can be more effective and efficient in supporting low-energy buildings; and 3) Assess how economic instruments should be funded, where public outlay is needed. Detailed case studies in this report assess examples of economic instruments for energy efficiency in the buildings sector in Canada (grants), France (tax relief and loans), Germany (loans and grants), Ireland (grants) and Italy (white certificates and tax relief).

Parsimonious and efficient assessment of health-related quality of life in osteoarthritis research: validation of the Assessment of Quality of Life (AQoL instrument

Directory of Open Access Journals (Sweden)

Segal Leonie

2006-03-01

Full Text Available Abstract Background The Assessment of Quality of Life (AQoL utility instrument was psychometrically developed for the general population. This study aimed to explore its potential as an osteoarthritis (OA outcome measure. Methods WOMAC, Lequesne index, SF-36, Visual analogue scales and the AQoL were administered to 222 people with OA. The ability of each questionnaire to detect differences between groups was based on (i self-rated health (SRH and, (ii differences between people on an orthopedic waiting list (WL vs people with OA in the community (C. Comparisons included effect size, relative efficiency and receiver operator characteristic curves. Results All instruments detected differences between groups; however no one instrument exhibited superior efficiency. The AQoL demonstrated strong psychometric properties. Conclusion The AQoL has equivalent performance to comparator questionnaires commonly used in OA research and would be a useful adjunct to well-established disease specific scales. The AQoL has important advantages; brevity (12 items, facilitates comparisons between disease groups, and delivers a utility score that can be used in health economic evaluations.

On the functional form of an efficiency index

DEFF Research Database (Denmark)

Hougaard, Jens Leth; Keiding, Hans

1998-01-01

An input efficiency index gives a numeric assessment of the degree to which a given input combination falls short of being efficient in producing a fixed amount of output. This paper presents a system of axioms which characterise a certain family of efficiency indices containing the well-known Fa...

Energy Efficiency Services Sector: Workforce Education and Training Needs

Energy Technology Data Exchange (ETDEWEB)

Goldman, Charles A.; Peters, Jane S.; Albers, Nathaniel; Stuart, Elizabeth; Fuller, Merrian C.

2010-03-19

This report provides a baseline assessment of the current state of energy efficiency-related education and training programs and analyzes training and education needs to support expected growth in the energy efficiency services workforce. In the last year, there has been a significant increase in funding for 'green job' training and workforce development (including energy efficiency), through the American Recovery and Reinvestment Act (ARRA). Key segments of the energy efficiency services sector (EESS) have experienced significant growth during the past several years, and this growth is projected to continue and accelerate over the next decade. In a companion study (Goldman et al. 2009), our research team estimated that the EESS will increase two- to four-fold by 2020, to 220,000 person-years of employment (PYE) (low-growth scenario) or up to 380,000 PYE (high-growth scenario), which may represent as many as 1.3 million individuals. In assessing energy efficiency workforce education and training needs, we focus on energy-efficiency services-related jobs that are required to improve the efficiency of residential and nonresidential buildings. Figure ES-1 shows the market value chain for the EESS, sub-sectors included in this study, as well as the types of market players and specific occupations. Our assessment does not include the manufacturing, wholesale, and retail distribution subsectors, or energy efficiency-focused operations and maintenance performed by facility managers.

Assessing Program Efficiency: A Time and Motion Study of the Mental Health Emergency Care — Rural Access Program in NSW Australia

Directory of Open Access Journals (Sweden)

Emily Saurman

2014-07-01

Full Text Available The Mental Health Emergency Care-Rural Access Program (MHEC-RAP is a telehealth solution providing specialist emergency mental health care to rural and remote communities across western NSW, Australia. This is the first time and motion (T&M study to examine program efficiency and capacity for a telepsychiatry program. Clinical services are an integral aspect of the program accounting for 6% of all activities and 50% of the time spent conducting program activities, but half of this time is spent completing clinical paperwork. This finding emphasizes the importance of these services to program efficiency and the need to address variability of service provision to impact capacity. Currently, there is no efficiency benchmark for emergency telepsychiatry programs. Findings suggest that MHEC-RAP could increase its activity without affecting program responsiveness. T&M studies not only determine activity and time expenditure, but have a wider application assessing program efficiency by understanding, defining, and calculating capacity. T&M studies can inform future program development of MHEC-RAP and similar telehealth programs, both in Australia and overseas.

Result Variation and Efficiency Kinetics in Real-Time PCR

Directory of Open Access Journals (Sweden)

Reza Shahsiah

2010-10-01

Full Text Available Fluorescent monitoring of DNA amplification is the basis of real-time PCR. Absolute quantification can be achieved using a standard curve method. The standard curve is constructed by amplifying known amounts of standards under identical conditions to that of the samples.The objective of the current study is to propose a mathematical model to assess the acceptability of PCR resulys.Four commercial standards for HCV-RNA (hepatitis C virus RNA along with 6 patient samples were measured by real-time PCR, using two different RT-PCR reagents. The standard deviation of regression (Sy,x was calculated for each group of standard and compared by F-Test. The efficiency kinetics was computed by logistic regression, c2 goodness of fit test was preformed to assess the appropriateness of the efficiency curves.Calculated efficiencies were not significantly different from the value predicted by logistic regression model. Reactions with more variation showed less stable efficiency curves, with wider range of amplification efficiencies.Amplification efficiency kinetics can be computed by fitting a logistic regression curve to the gathered fluorescent data of each reaction. This model can be employed to assess the acceptability of PCR results calculated by standard curve method.

Cosmological Analysis of Dynamical Chern-Simons Modified Gravity via Dark Energy Scenario

Directory of Open Access Journals (Sweden)

Abdul Jawad

2015-01-01

Full Text Available The purpose of this paper is to study the cosmological evolution of the universe in the framework of dynamical Chern-Simons modified gravity. We take pilgrim dark energy model with Hubble and event horizons in interacting scenario with cold dark matter. For this scenario, we discuss cosmological parameters such as Hubble and equation of state and cosmological plane like ωϑ-ωϑ′ and squared speed of sound. It is found that Hubble parameter approaches the ranges 75-0.5+0.5 (for u=2 and (74, 74.30 (for u=1,-1,-2 for Hubble horizon pilgrim dark energy. It implies the ranges 74.80-0.005+0.005 (for u=2 and (73.4, 74 (for u=-2 for event horizon pilgrim dark energy. The equation of state parameter provides consistent ranges with different observational schemes. Also, ωϑ-ωϑ′ planes lie in the range (ωϑ=-1.13-0.25+0.24,ωϑ′<1.32. The squared speed of sound shows stability for all present models in the present scenario. We would like to mention here that our results of various cosmological parameters show consistency with different observational data like Planck, WP, BAO, H0, SNLS, and WMAP.

Biological indicators capable of assessing thermal treatment efficiency of hydrocarbon mixture-contaminated soil.

Science.gov (United States)

Wang, Jiangang; Zhan, Xinhua; Zhou, Lixiang; Lin, Yusuo

2010-08-01

In China, there are many special sites for recycling and washing the used drums, which release a variety of C5-C40 hydrocarbon mixture into the soil around the site. The remediation of these contaminated sites by thermal treatment is adopted ubiquitously and needs to be assessed. Here we report the feasibility of biological indicators applied to assess thermal treatment efficiency in such contaminated soil. A series of biological indicators, including seed germination index (SGI), root elongation index (REI), plant growth height, biomass, carbon dioxide evolved (CDE), soil respiration inhibition (SRI) and soil enzymatic activities, were employed to monitor or assess hydrocarbon mixture removal in thermal treated soil. The results showed that residual hydrocarbon mixture content correlated strongly negatively with SGI for sesamum (Sesamum indicum L.), plant height, and biomass for ryegrass (Lolium perenne L.) in the concentration ranges of 0-3990, 0-3170 and 0-2910 mg kg(-1), respectively. In contrast, REI for sesamum was positively correlated with residual hydrocarbon mixture content from 0 to 1860 mg kg(-1). In addition, both CDE and SRI demonstrated that 600 mg kg(-1) of residual hydrocarbon mixture content caused the highest amount of soil carbon dioxide emission and inhabitation of soil respiration. The results of soil enzymes indicated that 1000 mg kg(-1) of residual hydrocarbon mixture content was the threshold value of stimulating or inhibiting the activities of phosphatase and catalase, or completely destroying the activities of dehydrogenase, invertase, and urease. In conclusion, these biological indicators can be used as a meaningful complementation for traditional chemical content measurement in evaluating the environmental risk of the contaminated sites before and after thermal treatment. (c) 2010 Elsevier Ltd. All rights reserved.

Efficiency assessment and benchmarking of thermal power plants in India

International Nuclear Information System (INIS)

Shrivastava, Naveen; Sharma, Seema; Chauhan, Kavita

2012-01-01

Per capita consumption of electricity in India is many folds lesser than Canada, USA, Australia, Japan, Chaina and world average. Even though, total energy shortage and peaking shortage were recorded as 11.2% and 11.85%, respectively, in 2008–09 reflecting non-availability of sufficient supply of electricity. Performance improvement of very small amount can lead to large contribution in financial terms, which can be utilized for capacity addition to reduce demand supply gap. Coal fired thermal power plants are main sources of electricity in India. In this paper, relative technical efficiency of 60 coal fired power plants has been evaluated and compared using CCR and BCC models of data envelopment analysis. Target benchmark of input variables has also been evaluated. Performance comparison includes small versus medium versus large power plants and also state owned versus central owned versus private owned. Result indicates poor performance of few power plants due to over use of input resources. Finding reveals that efficiency of small power plants is lower in comparison to medium and large category and also performance of state owned power plants is comparatively lower than central and privately owned. Study also suggests different measures to improve technical efficiency of the plants. - Highlights: ► This study evaluates relative technical efficiency of 60 coal fired thermal power plants of India. ► Input oriented CCR and BCC models of data envelopment analysis have been used. ► Small, medium and large power plants have been compared. ► Study will help investor while setting up new power projects. ► Power plants of different ownerships have also been compared.

Assessment of the achieved savings from induction motors energy efficiency labeling in Brazil

International Nuclear Information System (INIS)

Bortoni, E.C.; Nogueira, L.A.H.; Cardoso, R.B.; Haddad, J.; Souza, E.P.; Dias, M.V.X.; Yamachita, R.A.

2013-01-01

Highlights: • We have modeled the influence of the increase of efficiency of motors. • The amount of saved energy is estimated. • The work deals with the “measurement” of a non-consumed energy. • The influence of the motor useful life is taken into account. • The influence of efficiency decrease along the motor life is also taken into account. - Abstract: Since 1995 Brazil has been applying its labeling program to increase the efficiency of application of many household appliances and equipment. From 2003 on inductions motors have also been receiving the PROCEL prize, which helped push motors efficiency over than those limits established by the labeling program. Therefore, this work presents the development of a model to estimate the amount of savings obtained with the usage of the PROCEL endorsement labels in standard and in energy efficient motors. The estimated peak demand reduction is also inferred. The developed model makes the usage of sales information and of a discard function to estimate the Brazilian motor stock. Approaches such as the use of efficiency loading and efficiency aging factors are employed to estimate motors consumption

Heavy Metal Phytoremediation: Microbial Indicators of Soil Health for the Assessment of Remediation Efficiency

Science.gov (United States)

Epelde, Lur; Ma Becerril, José; Alkorta, Itziar; Garbisu, Carlos

Phytoremediation is an effective, non-intrusive, inexpensive, aesthetically pleasing, socially accepted, promising phytotechnology for the remediation of polluted soils. The objective of any soil remediation process must be not only to remove the contaminant(s) from the soil but, most importantly, to restore the continued capacity of the soil to perform or function according to its potential (i.e., to recover soil health). Hence, indicators of soil health are needed to properly assess the efficiency of a phytoremediation process. Biological indicators of soil health, especially those related to the size, activity and diversity of the soil microbial communities, are becoming increasingly used, due to their sensitivity and capacity to provide information that integrates many environmental factors. In particular, microbial indicators of soil health are valid tools to evaluate the success of metal phytoremediation procedures such as phytoextraction and phytostabilization processes.

Assessing National Employment Impacts of Investment in Residential and Commercial Sector Energy Efficiency: Review and Example Analysis

Energy Technology Data Exchange (ETDEWEB)

Anderson, David M.; Belzer, David B.; Livingston, Olga V.; Scott, Michael J.

2014-06-18

Pacific Northwest National Laboratory (PNNL) modeled the employment impacts of a major national initiative to accelerate energy efficiency trends at one of two levels: • 15 percent savings by 2030. In this scenario, efficiency activities save about 15 percent of the Annual Energy Outlook (AEO) Reference Case electricity consumption by 2030. It is assumed that additional energy savings in both the residential and commercial sectors begin in 2015 at zero, and then increase in an S-shaped market penetration curve, with the level of savings equal to about 7.0 percent of the AEO 2014 U.S. national residential and commercial electricity consumption saved by 2020, 14.8 percent by 2025, and 15 percent by 2030. • 10 percent savings by 2030. In this scenario, additional savings begin at zero in 2015, increase to 3.8 percent in 2020, 9.8 percent by 2025, and 10 percent of the AEO reference case value by 2030. The analysis of the 15 percent case indicates that by 2030 more than 300,000 new jobs would likely result from such policies, including an annual average of more than 60,000 jobs directly supporting the installation and maintenance of energy efficiency measures and practices. These are new jobs resulting initially from the investment associated with the construction of more energy-efficient new buildings or the retrofit of existing buildings and would be sustained for as long as the investment continues. Based on what is known about the current level of building-sector energy efficiency jobs, this would represent an increase of more than 10 percent from the current estimated level of over 450,000 such jobs. The more significant and longer-lasting effect comes from the redirection of energy bill savings toward the purchase of other goods and services in the general economy, with its attendant influence on increasing the total number of jobs. This example analysis utilized PNNL’s ImSET model, a modeling framework that PNNL has used over the past two decades to assess

Determinants of marketing efficiency for sweetpotato in Nasarawa ...

African Journals Online (AJOL)

Determinants of marketing efficiency for sweetpotato in Nasarawa State and ... The study was conducted to assess the determinants of sweet potato marketing efficiency in Nasarawa State and FCT. ... EMAIL FULL TEXT EMAIL FULL TEXT

Full report: Assessment and opportunity identification of energy efficient pollution prevention technologies and processes

Energy Technology Data Exchange (ETDEWEB)

1994-11-01

US industry produces about 12 billion tons of waste a year, or two-thirds of the waste generated in the US. The costs of handling and disposing of these wastes are significant, estimated to be between $25 and $43 billion in 1991, and represent an increase of 66% since 1986. US industry also uses about one-third of all energy consumed in the nation, which adds to the environmental burden. Industrial wastes affect the environmental well-being of the nation and, because of their growing costs, the competitive abilities of US industry. As part of a national effort to reduce industrial wastes, the US Congress passed the Energy Policy Act (EPAct, P.L. 102-486). Section 2108, subsections (b) and (c), of EPAct requires the Department of Energy (DOE) to identify opportunities to demonstrate energy efficient pollution prevention technologies and processes; to assess their availability and the energy, environmental, and cost effects of such technologies; and to report the results. Work for this report clearly pointed to two things, that there is insufficient data on wastes and that there is great breadth and diversity in the US industrial sector. This report identifies: information currently available on industrial sector waste streams, opportunities for demonstration of energy efficient pollution prevention technologies in two industries that produce significant amounts of waste--chemicals and petroleum, characteristics of waste reducing and energy saving technologies identifiable in the public literature, and potential barriers to adoption of waste reducing technologies by industry.

Efficient Adoption and Assessment of Multiple Process Improvement Reference Models

Directory of Open Access Journals (Sweden)

Simona Jeners

2013-06-01

Full Text Available A variety of reference models such as CMMI, COBIT or ITIL support IT organizations to improve their processes. These process improvement reference models (IRMs cover different domains such as IT development, IT Services or IT Governance but also share some similarities. As there are organizations that address multiple domains and need to coordinate their processes in their improvement we present MoSaIC, an approach to support organizations to efficiently adopt and conform to multiple IRMs. Our solution realizes a semantic integration of IRMs based on common meta-models. The resulting IRM integration model enables organizations to efficiently implement and asses multiple IRMs and to benefit from synergy effects.

An Empirical Assessment of the Technical Efficiency in some ...

African Journals Online (AJOL)

The question of how the scarce resources allocated to the hospital sub-sector have been utilized and the need for resource optimization to maximize productivity by hospitals without increase in cost created the need to study the technical efficiency of Nigerian hospitals. The Data Envelopment Analysis procedure was used ...

Assessing efficiency and effectiveness of Malaysian Islamic banks: A two stage DEA analysis

Science.gov (United States)

Kamarudin, Norbaizura; Ismail, Wan Rosmanira; Mohd, Muhammad Azri

2014-06-01

Islamic banks in Malaysia are indispensable players in the financial industry with the growing needs for syariah compliance system. In the banking industry, most recent studies concerned only on operational efficiency. However rarely on the operational effectiveness. Since the production process of banking industry can be described as a two-stage process, two-stage Data Envelopment Analysis (DEA) can be applied to measure the bank performance. This study was designed to measure the overall performance in terms of efficiency and effectiveness of Islamic banks in Malaysia using Two-Stage DEA approach. This paper presents analysis of a DEA model which split the efficiency and effectiveness in order to evaluate the performance of ten selected Islamic Banks in Malaysia for the financial year period ended 2011. The analysis shows average efficient score is more than average effectiveness score thus we can say that Malaysian Islamic banks were more efficient rather than effective. Furthermore, none of the bank exhibit best practice in both stages as we can say that a bank with better efficiency does not always mean having better effectiveness at the same time.

78 FR 29131 - Environmental Impacts Statements; Notice of Availability

Science.gov (United States)

2013-05-17

..., Clinker Mining Addition Project, Medicine Bow-Routt National Forests and Thunder Basin National Grassland..., USFS, MT, Pilgrim Timber Sale Project, Kootenai National Forest, Review Period Ends: 06/17/2013...

Eco-Efficiency Assessment of Bioplastics Production Systems and End-of-Life Options

Directory of Open Access Journals (Sweden)

Kunnika Changwichan

2018-03-01

Full Text Available Bioplastics demand has been increased globally due to concerns regarding environmentally friendly consumption and production. Polylactic acid (PLA, polyhydroxyalkanoates (PHAs, and polybutylene succinate (PBS are promising bioplastics with bio-based feedstocks and property of biodegradability. They are produced by bacterial fermentation of sugars from carbohydrate sources. With flexibility in their properties, PLA, PHAs, and PBS can potentially substitute conventional plastics such as polypropylene (PP, polyethylene terephthalate (PET, and polystyrene (PS. This study aims at evaluating the environmental and economic sustainability of bioplastics production together with end-of-life (EOL options. The combination of environmental and economic indicators, eco-efficiency (E/E, was selected to investigate the performance of PLA, PHAs, and PBS from sugarcane and cassava in comparison with PP. The environmental impacts were determined using life cycle assessment. The product cost was used to represent the economic value. The E/E results showed that the environmental and economic sustainability could be enhanced with 100% mechanical recycling of all kinds of studied plastics. It is also important to highlight that mechanical recycling showed a better performance in terms of E/E than composting of bioplastics.

Calculation of the efficiency of accounting outsourcing

Directory of Open Access Journals (Sweden)

H.I. Liakhovych

2018-04-01

Full Text Available To ensure the best performance, enterprises pass on individual business processes for outsourcing. However, the implementation of this step requires an assessment of the effectiveness of such actions. The purpose of the article is to analyze the approaches to assessing the effectiveness of accounting outsourcing and to develop proposals for its methodology, taking into account the main goal of reducing transaction costs. The article defines the composition of the elements of the cost of maintaining accounting in the enterprise. It is proved that the efficiency of accounting outsourcing should be considered in two aspects: 1 it is related to economic efficiency (saving of internal resources of the enterprise due to the transfer of business processes for accounting on outsourcing; 2 is related to the efficiency of the outsourcer's work and the uninterrupted functioning of the enterprise that has taken advantage of outsourcing services. In order to assess the efficiency of the company's services, the outsourcer proposes to use a methodology that takes into account the indicators: the timeliness of the execution of works and the provision of services in accordance with the terms of the contract on outsourcing; completeness of performance of works and provision of services in accordance with the terms of the contract on outsourcing.

Assessing Window Replacement Options | Efficient Windows Collaborative

Science.gov (United States)

Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

Gasoline taxes or efficiency standards? A heterogeneous household demand analysis

International Nuclear Information System (INIS)

Liu, Weiwei

2015-01-01

Using detailed consumer expenditure survey data and a flexible semiparametric dynamic demand model, this paper estimates the price elasticity and fuel efficiency elasticity of gasoline demand at the household level. The goal is to assess the effectiveness of gasoline taxes and vehicle fuel efficiency standards on fuel consumption. The results reveal substantial interaction between vehicle fuel efficiency and the price elasticity of gasoline demand: the improvement of vehicle fuel efficiency leads to lower price elasticity and weakens consumers’ sensitivity to gasoline price changes. The offsetting effect also differs across households due to demographic heterogeneity. These findings imply that when gasoline taxes are in place, tightening efficiency standards will partially offset the strength of taxes on reducing fuel consumption. - Highlights: • Model household gasoline demand using a semiparametric approach. • Estimate heterogeneous price elasticity and fuel efficiency elasticity. • Assess the effectiveness of gasoline taxes and efficiency standards. • Efficiency standards offset the impact of gasoline taxes on fuel consumption. • The offsetting effect differs by household demographics

Energy efficiency in India: Assessing the policy regimes and their impacts

International Nuclear Information System (INIS)

Balachandra, P.; Ravindranath, Darshini; Ravindranath, N.H.

2010-01-01

In the recent years, India has emerged as one of the fast growing economies of the world necessitating equally rapid increase in modern energy consumption. With an imminent global climate change threat, India will have difficulties in continuing with this rising energy use levels towards achieving high economic growth. It will have to follow an energy-efficient pathway in attaining this goal. In this context, an attempt is made to present India's achievements on the energy efficiency front by tracing the evolution of policies and their impacts. The results indicate that India has made substantial progress in improving energy efficiency which is evident from the reductions achieved in energy intensities of GDP to the tune of 88% during 1980-2007. Similar reductions have been observed both with respect to overall Indian economy and the major sectors of the economy. In terms of energy intensity of GDP, India occupies a relatively high position of nine among the top 30 energy consuming countries of the world.

Energy efficiency indicators for assessing construction systems storing renewable energy: Application to phase change material-bearing Façades

OpenAIRE

Tenorio Ríos, José Antonio; Sánchez-Ramos, José; Ruiz-Pardo, Álvaro; Álvarez, Servando; Cabeza, Luisa F.

2015-01-01

Assessing the performance or energy efficiency of a single construction element by itself is often a futile exercise. That is not the case, however, when an element is designed, among others, to improve building energy performance by harnessing renewable energy in a process that requires a source of external energy. Harnessing renewable energy is acquiring growing interest in Mediterranean climates as a strategy for reducing the energy consumed by buildings. When such reduction is oriented to...

Les ruminantia (Artiodactyla, Mammalia du miocene des bugti (Balouchistan, Pakistan

Directory of Open Access Journals (Sweden)

Soria, D.

2001-08-01

Full Text Available The revision of the old material studied by Pilgrim (1908, 191 1, 1912, Forster Cooper, 1915 added to the study of the fossils recently yielded in the synclinal of Dera Bugti (Southem Pakistan by Welcome and its team (Welcomme et al., 1997 leads to consider the existence of five ruminats genera (Siarnotragulus, Dorcahune, Progiraffa, Bugtimeryx, Eotragus, belonging to eigth species.La revisión de los materiales descritos por Pilgrim (1908, 1911, 1912, Forster Cooper, 1915 junto al estudio de los hallazgos recientes realizados en el sinclinal de Dera Bugti (Sur de Paquistán por Welcomme et al. (1997, nos permite reconocer en esta área cinco géneros de ruminantes (Siamotragulus, Dorcahune, Progiraffa, Bugtimeryx, Eotragus con un total de ocho especies.

An expert system for diesel generator diagnostics

International Nuclear Information System (INIS)

Bley, D.C.; Read, J.W.; Kaplan, S.; Liming, J.K.; Brosee, N.M.; Hanley, D.W.

1987-01-01

The idea of developing artificial intelligence (AI) systems to capture the knowledge of human experts is receiving much attention these days. The idea is even more attractive when important expertise resides within a single individual, especially one who is nearing retirement and who has not otherwise recorded or passed along his important knowledge and thought processes. The diesel generators at Pilgrim Nuclear Power Station have performed exceptionally well, primarily due to the care and attention of one man. Therefore, the authors are constructing an expert system for the diagnosis of diesel generator problems at Pilgrim. This paper includes a description of the expert system design and operation, examples from the knowledge base, and sample diagnoses, so the reader can observe the process in action

Assessing the Economic Efficiency of Maize Production in Northern ...

African Journals Online (AJOL)

2017-05-01

May 1, 2017 ... successes of the green revolution in Asia brought to the fore agriculture's ... Maize is a very important staple food in Ghana accounting for more than 50% of total .... The cost efficiency function is specified by changing the error from the to ..... A Guide to Frontier Version 4.1: A computer program for Frontier.

A polynomial chaos ensemble hydrologic prediction system for efficient parameter inference and robust uncertainty assessment

Science.gov (United States)

Wang, S.; Huang, G. H.; Baetz, B. W.; Huang, W.

2015-11-01

This paper presents a polynomial chaos ensemble hydrologic prediction system (PCEHPS) for an efficient and robust uncertainty assessment of model parameters and predictions, in which possibilistic reasoning is infused into probabilistic parameter inference with simultaneous consideration of randomness and fuzziness. The PCEHPS is developed through a two-stage factorial polynomial chaos expansion (PCE) framework, which consists of an ensemble of PCEs to approximate the behavior of the hydrologic model, significantly speeding up the exhaustive sampling of the parameter space. Multiple hypothesis testing is then conducted to construct an ensemble of reduced-dimensionality PCEs with only the most influential terms, which is meaningful for achieving uncertainty reduction and further acceleration of parameter inference. The PCEHPS is applied to the Xiangxi River watershed in China to demonstrate its validity and applicability. A detailed comparison between the HYMOD hydrologic model, the ensemble of PCEs, and the ensemble of reduced PCEs is performed in terms of accuracy and efficiency. Results reveal temporal and spatial variations in parameter sensitivities due to the dynamic behavior of hydrologic systems, and the effects (magnitude and direction) of parametric interactions depending on different hydrological metrics. The case study demonstrates that the PCEHPS is capable not only of capturing both expert knowledge and probabilistic information in the calibration process, but also of implementing an acceleration of more than 10 times faster than the hydrologic model without compromising the predictive accuracy.

[Assessment of otoacustic emissions efficiency in diagnosis of hearing loss in workers exposed to airport stressors].

Science.gov (United States)

Casale, T; Piccoli, F; Rosati, M V; Cancanelli, G; Trovè, L; Marrocco, M; Schifano, M P; Giubilati, R; De Sio, S; Tomei, G; Caciari, T; Tomei, F

2013-01-01

Otoacoustic emissions are signals that originate from the cochlea, measuring them can be considered an objective method in the assessment of auditory function. In our study we wanted to examine their efficiency among normal audiological exams. We examined 14 workers exposed to continuous aircraft noise. They underwent ENT examination, metric eardrum test, hearing test tone audiometry system powered by 1 dB, spontaneous otoacoustic emissions and evoked otoacoustic emissions. For inclusion in the study the patients had to show bilateral normoacusia at the audiometry. The variation of the audiometric tracks was statistically significant (p workers and provides objective results, so it is a more effective and objective method then the tone audiometry.

Air compressor efficiency in a Vietnamese enterprise

Energy Technology Data Exchange (ETDEWEB)

Yang, Ming [3E and T International, Suite 1506, Building No. 10, Luo Ma Shi Street, Xuan Wu District, Beijing 100052 (China)

2009-06-15

Compressed air systems in a Vietnamese footwear manufacturing enterprise consume about 10% of enterprise's total electric power supply. Energy efficiency of these air compressor systems, either equipped with new and efficient compressors or old and inefficient ones, can only reach between 5% and 10%. In other words, regardless whatever air compressors were installed, energy loss from the compressor systems was over 80%. This study discovered that energy loss was due to non-optimized operations of the air compressor systems and air leakages. The objectives of the paper are to uncover energy saving potential in Vietnamese air compressor systems, demonstrate methodologies used in the auditing and assessment, share auditing and assessment results, and serve a guide on how to analyze energy efficiency in a compressed air system. This paper concludes that energy efficiency investment in air compressor systems in the Vietnamese enterprise could be extremely cost-effective. If the enterprise invests USD 84,000 in the air compressors to improve efficiency performance, the investment capital will be recovered in about six months. The net present value of the investment will be about USD 864,000 at a discount rate of 12%. (author)

Air compressor efficiency in a Vietnamese enterprise

Energy Technology Data Exchange (ETDEWEB)

Yang Ming [3E and T International, Suite 1506, Building No. 10, Luo Ma Shi Street, Xuan Wu District, Beijing 100052 (China)], E-mail: ming.yang7@gmail.com

2009-06-15

Compressed air systems in a Vietnamese footwear manufacturing enterprise consume about 10% of enterprise's total electric power supply. Energy efficiency of these air compressor systems, either equipped with new and efficient compressors or old and inefficient ones, can only reach between 5% and 10%. In other words, regardless whatever air compressors were installed, energy loss from the compressor systems was over 80%. This study discovered that energy loss was due to non-optimized operations of the air compressor systems and air leakages. The objectives of the paper are to uncover energy saving potential in Vietnamese air compressor systems, demonstrate methodologies used in the auditing and assessment, share auditing and assessment results, and serve a guide on how to analyze energy efficiency in a compressed air system. This paper concludes that energy efficiency investment in air compressor systems in the Vietnamese enterprise could be extremely cost-effective. If the enterprise invests USD 84,000 in the air compressors to improve efficiency performance, the investment capital will be recovered in about six months. The net present value of the investment will be about USD 864,000 at a discount rate of 12%.

Air compressor efficiency in a Vietnamese enterprise

International Nuclear Information System (INIS)

Yang Ming

2009-01-01

Compressed air systems in a Vietnamese footwear manufacturing enterprise consume about 10% of enterprise's total electric power supply. Energy efficiency of these air compressor systems, either equipped with new and efficient compressors or old and inefficient ones, can only reach between 5% and 10%. In other words, regardless whatever air compressors were installed, energy loss from the compressor systems was over 80%. This study discovered that energy loss was due to non-optimized operations of the air compressor systems and air leakages. The objectives of the paper are to uncover energy saving potential in Vietnamese air compressor systems, demonstrate methodologies used in the auditing and assessment, share auditing and assessment results, and serve a guide on how to analyze energy efficiency in a compressed air system. This paper concludes that energy efficiency investment in air compressor systems in the Vietnamese enterprise could be extremely cost-effective. If the enterprise invests USD 84,000 in the air compressors to improve efficiency performance, the investment capital will be recovered in about six months. The net present value of the investment will be about USD 864,000 at a discount rate of 12%.

Improving building energy efficiency in India: State-level analysis of building energy efficiency policies

Energy Technology Data Exchange (ETDEWEB)

Yu, Sha; Tan, Qing; Evans, Meredydd; Kyle, Page; Vu, Linh; Patel, Pralit L.

2017-11-01

India is expected to add 40 billion m2 of new buildings till 2050. Buildings are responsible for one third of India’s total energy consumption today and building energy use is expected to continue growing driven by rapid income and population growth. The implementation of the Energy Conservation Building Code (ECBC) is one of the measures to improve building energy efficiency. Using the Global Change Assessment Model, this study assesses growth in the buildings sector and impacts of building energy policies in Gujarat, which would help the state adopt ECBC and expand building energy efficiency programs. Without building energy policies, building energy use in Gujarat would grow by 15 times in commercial buildings and 4 times in urban residential buildings between 2010 and 2050. ECBC improves energy efficiency in commercial buildings and could reduce building electricity use in Gujarat by 20% in 2050, compared to the no policy scenario. Having energy codes for both commercial and residential buildings could result in additional 10% savings in electricity use. To achieve these intended savings, it is critical to build capacity and institution for robust code implementation.

[Paulo Coelho. Zahir ; Jan Kaus. Tema] / Aarne Biin

Index Scriptorium Estoniae

Biin, Aarne

2007-01-01

Tutvustus: Coelho, Paulo. Zahir : [romaan] / portugali keelest tõlkinud Anneli Tuulik, [Konstantinos Kavafise luuletuse uuskreeka keelest tõlkinud Mati Sirkel. Tallinn] : Pilgrim Group, 2005 ; Kaus, Jan. Tema : [romaan]. Tallinn : Tuum, 2006

Accelerating Improvements in the Energy Efficiency of Room Air Conditioners (RACs) in India: Potential, Cost-Benefit, and Policies (Interim Assessment)

Energy Technology Data Exchange (ETDEWEB)

Abhyankar, Nikit [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shah, Nihar [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Park, Won Young [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Phadke, Amol [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-06-01

Falling AC prices, increasing incomes, increasing urbanization, and high cooling requirements due to hot climate are all driving increasing uptake of Room Air Conditioners (RACs) in the Indian market. Air conditioning already comprises 40-60% of summer peak load in large metropolitan Indian cities such as Delhi and is likely to contribute 150 GW to the peak demand in 2030. Standards and labeling policies have contributed to improving the efficiency of RACs in India by about 2.5% in the last 10 years (2.5% per year) while inflation adjusted RAC prices have continued to decline. In this paper, we assess the technical feasibility, cost-benefit, and required policy enhancements by further accelerating the efficiency improvement of RACs in India. We find that there are examples of significantly more accelerated improvements such as those in Japan and Korea where AC efficiency improved by more than 7% per year resulting in almost a doubling of energy efficiency in 7 to 10 years while inflation adjusted AC prices continued to decline. We find that the most efficient RAC sold on the Indian market is almost twice as efficient as the typical AC sold on the market and hence see no technology constraints in a similar acceleration of improvement of efficiency. If starting 2018, AC efficiency improves at a rate of 6% instead of 3%, 40-60 GW of peak load (equivalent to connected load of 5-6 billion LED bulbs), and over 75 TWh/yr (equivalent to 60 million consumers consuming 100 kWh/month) will be saved by 2030; total peak load reduction would be as high as 50 GW. The net present value (NPV) of the consumer benefit between 2018-2030 will range from Rs 18,000 Cr in the most conservative case (in which prices don’t continue to decline and increase based estimates of today’s cost of efficiency improvement) to 140,000 Cr in a more realistic case (in which prices are not affected by accelerated efficiency improvement as shown by historical experience). This benefit is achievable by

Assessment of Energy Efficient and Model Based Control

Science.gov (United States)

2017-06-15

conditions. A sudden tropical storm brought rain during the week of the assessment, with the result that the assessment needed to be compressed into 1 day...Emmanuel Collins, and Jonathan Clark 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES...robots from tools that Soldiers use into teammates with which Soldiers can work . One desired ability of such a teammate is the ability to operate in

Transient ischaemic attacks clinics provide equivalent and more efficient care than early in-hospital assessment.

Science.gov (United States)

Martínez-Martínez, M M; Martínez-Sánchez, P; Fuentes, B; Cazorla-García, R; Ruiz-Ares, G; Correas-Callero, E; Lara-Lara, M; Díez-Tejedor, E

2013-02-01

Clinics for early management of transient ischaemic attacks (TIAs) have been developed in some stroke centres, resulting in reduced recurrence rates compared to appointment-based outpatient management, thus saving on hospitalization. We analysed the care process, recurrence rates and economic impact of the first year of work in our early-management TIA clinic and compared these with our previous in-hospital study protocols for low- and moderate-risk TIA patients. This was a prospective evaluation of the management of low- to moderate-risk TIA patients, comparing a new TIA clinic model (2010) with a previous hospitalization model (2009). Demographic data, vascular risk factor profiles, diagnostic test performance, secondary prevention measures, final aetiological diagnoses and cerebrovascular recurrences at 7 and 90 days were compared between in-hospital and TIA clinic assessed patients. We also carried out an economic comparison of the costs of each model's process. Two hundred and eleven low- to moderate-risk TIA patients were included, of whom 40.8% were hospitalized. There were no differences between the TIA clinic assessed and in-hospital assessed patients in terms of risk factor diagnosis and secondary prevention measures. The stroke recurrence rate (2.4% vs. 1.2%; P = 0.65) was low and similar for both groups (CI 95%, 0.214-20.436; P = 0.52). Cost per patient was €393.28 for clinic versus €1931.18 for in-hospital management. Outpatient management resulted in a 77.8% reduction in hospitalizations. Transient ischaemic attacks clinics are efficient for the early management of low- to moderate-risk TIA patients compared to in-hospital assessment, with no higher recurrence rates and at almost one-fifth the cost. © 2012 The Author(s) European Journal of Neurology © 2012 EFNS.

Impact assessment of energy-efficient lighting in patients with lupus erythematosus: a pilot study.

Science.gov (United States)

Fenton, L; Dawe, R; Ibbotson, S; Ferguson, J; Silburn, S; Moseley, H

2014-03-01

Patients with lupus erythematosus (LE) are often abnormally photosensitive. Ultraviolet (UV) exposure can not only induce cutaneous lesions but may also contribute to systemic flares and disease progression. Various forms of energy-efficient lighting have been shown to emit UV radiation. To determine the effects of these emissions on individuals with LE. This assessment investigated cutaneous responses to repeated exposures from three types of lighting: compact fluorescent lamp (CFL), light-emitting diode (LED) and energy-efficient halogen (EEH). The subjects were 15 patients with LE and a control group of five healthy volunteers. No cutaneous LE lesions were induced by any of the light sources. Delayed skin erythema was induced at the site of CFL irradiation in six of the 15 patients with LE and two of the five healthy subjects. Erythema was increased in severity and more persistent in patients with LE. One patient with LE produced a positive delayed erythema to the EEH. A single patient with LE produced immediate abnormal erythemal responses to the CFL, LED and EEH. Further investigation revealed that this patient also had solar urticaria. All other subjects had negative responses to LED exposure. Compact fluorescent lamps emit UV that can induce skin erythema in both individuals with LE and healthy individuals when situated in close proximity. However, this occurs to a greater extent and is more persistent in patients with LE. EEHs emit UVA that can induce erythema in patients with LE. LEDs provide a safer alternative light source without risk of UV exposure. © 2013 British Association of Dermatologists.

Proposal for the Evaluation of Eco-Efficient Concrete

Directory of Open Access Journals (Sweden)

Taehyoung Kim

2016-07-01

Full Text Available The importance of environmental consequences due to diverse substances that are emitted during the production of concrete is recognized, but environmental performance tends to be evaluated separately from the economic performance and durability performance of concrete. In order to evaluate concrete from the perspective of sustainable development, evaluation technologies are required for comprehensive assessment of environmental performance, economic performance, and durability performance based on a concept of sustainable development called the triple bottom line (TBL. Herein, an assessment method for concrete eco-efficiency is developed as a technique to ensure the manufacture of highly durable and eco-friendly concrete, while minimizing both the load on the ecological environment and manufacturing costs. The assessment method is based on environmental impact, manufacturing costs, and the service life of concrete. According to our findings, eco-efficiency increased as the compressive strength of concrete increased from 21 MPa to 40 MPa. The eco-efficiency of 40 MPa concrete was about 50% higher than the eco-efficiency of 24 MPa concrete. Thus eco-efficiency is found to increase with an increasing compressive strength of concrete because the rate of increase in the service life of concrete is larger than the rate of increase in the costs. In addition, eco-efficiency (KRW/year was shown to increase for all concrete strengths as mixing rates of admixtures (Ground Granulated Blast furnace Slag increased to 30% during concrete mix design. However, when the mixing rate of admixtures increased to 40% and 60%, the eco-efficiency dropped due to rapid reduction in the service life values of concrete to 74 (year/m3 and 44 (year/m3, respectively.

Proposing a Master's Programme on Participatory Integrated Assessment of Energy Systems to Promote Energy Access and Energy Efficiency in Southern Africa

Science.gov (United States)

Kiravu, Cheddi; Diaz-Maurin, François; Giampietro, Mario; Brent, Alan C.; Bukkens, Sandra G.F.; Chiguvare, Zivayi; Gasennelwe-Jeffrey, Mandu A.; Gope, Gideon; Kovacic, Zora; Magole, Lapologang; Musango, Josephine Kaviti; Ruiz-Rivas Hernando, Ulpiano; Smit, Suzanne; Vázquez Barquero, Antonio; Yunta Mezquita, Felipe

2018-01-01

Purpose: This paper aims to present a new master's programme for promoting energy access and energy efficiency in Southern Africa. Design/methodology/approach: A transdisciplinary approach called "participatory integrated assessment of energy systems" (PARTICIPIA) was used for the development of the curriculum. This approach is based on…

Assessment of the energy and exergy efficiencies of farm to fork grain cultivation and bread making processes in Turkey and Germany

International Nuclear Information System (INIS)

Degerli, Bahar; Nazir, Serap; Sorgüven, Esra; Hitzmann, Bernd; Özilgen, Mustafa

2015-01-01

Energy and exergy efficiencies of the wheat and rye bread and hamburger bun making processes are assessed based on data from Turkey and Germany. Amount of the land required to produce the same amount of wheat in Turkey is 3.34 times of that required in Germany; this ratio is 2.30 for the rye grain. These results show that the efficiency of the conversion of the solar energy into the grain mass is low in Turkey. CDP (Cumulative degree of perfection) for the wheat and the rye grain production is 3.73 and 4.96 in Turkey, and 11.26 and 10.46 in Germany. Specific energy utilization for rye bread production is almost the same in Turkey and Germany; but it is 12% higher in Turkey for wheat bread and hamburger bun making. Hamburger bun production requires the maximum energy utilization due to the higher weight loss in baking. The rye bread production process requires the minimum energy utilization due to the lower energy input in the agriculture and higher efficiency in the flour production. The maximum exergy destructions occur during the milling and the baking steps. - Highlights: • Agriculture determines the energy and exergy efficiency of bread making. • Conversion efficiency of the solar energy into grain mass is lower in Turkey. • The smallest energy and exergy is needed for the rye bread making. • The largest energy and exergy is needed for the hamburger bun making. • Energy efficiency per mass of bread production is 12% higher in Germany.

Assessing the Efficiency of commercial Tunisian Banks using Fuzzy Data Envelopment Analysis

Directory of Open Access Journals (Sweden)

Houssine Tlig

2017-08-01

Full Text Available The banking sector is of great importance to Tunisian's economy. Major commercial banks continue to spend high proportion of their budgets on new technologies and innovation in order to satisfy their customers and enhance their competitiveness. Consequently, performance analysis has become part of their management practices.This paper aims to evaluate the efficiency of commercial Tunisian banks in terms of several crisp and imprecise data. Two approaches of fuzzy data envelopment analysis (FDEA, the possibility approach and the approach based on relations between fuzzy numbers (BRONF, are used to obtain the efficiency score of each bank. The results show that, in a competitive environment, no-financial inputs and outputs should be taken into account in order to obtain credible and realistic efficiency scores.

Assessment of the efficiency and water productivity in the Spanish irrigation associations "Canal Toro-Zamora" and "Canal Villagonzalo" from the Duero basin

Science.gov (United States)

Rodriguez-Sinobas, Leonor; Amado Mendoza Hidalgo, Edwin

2017-04-01

Within a water scarcity scenario, the irrigated agriculture economic sector would be affected by the reduction on water supply and this might have a negative impact on the National gross income. Water for irrigation in Spain comprises the 75% of total consumption. Therefore, the search for irrigation strategies dealing with sustainable irrigation by saving water and improving the environment quality is encouraged. Within this framework the assessment of water use in the irrigation districts to assist water stakeholder decisions is reinforced. Water resources can be assessed at field scheme or regional scale by analyzing the water use efficiency and the water productivity indicators. Which determine the water availability and the water supply quality in irrigation areas. Among then, the following are broadly used: water productivity WP, and irrigation water productivity IWP, annual relative water supply (ARWS) and the annual relative irrigation water supply (ARIS). Keeping in mind the water scarcity scenario for irrigation in the short and long term and the probably scenario of water allocation for different uses following criteria of efficiency and productivity, this work is aimed at assessing the water use efficiency and water productivity of two modernized Spanish irrigation districts CCRRs: "Canal Toro-Zamora" and "Canal Villagonzalo" from the Duero basin. For that purpose, the above indicators were estimated for years 2014 and 2015. Crop water requirements are needed to calculate the indicators. For this study, maize was chosen since it is the major crop in the area and its water needs were estimated with the FAO program Cropwat. Local crop coefficients (Kc) were determined with the open access application SpiderWebGis (http://maps.spiderwebgis.org/webgis/) which uses satelital images to monitor Kc coefficients in all crops across Spain. In both CCRRs the maize Kc coefficients were similar for all the phenology stages although a slightly spatial variability was

77 FR 16098 - In the Matter of All Operating Boiling Water Reactor Licensees With Mark I and Mark II...

Science.gov (United States)

2012-03-19

.... Jack M. Davis Senior Vice President and Chief Nuclear Officer. Detroit Edison Company Fermi 2--210 NOC..., Inc Pilgrim Nuclear Power Station 600 Rocky Hill Road Plymouth, MA 02360-5508 Quad Cities Nuclear...

Assessment of gender differentials in economic and technical efficiency of poultry egg, a case study in Lagos State, Nigeria.

Directory of Open Access Journals (Sweden)

Hafis Odunlami

2016-03-01

Full Text Available Gender has been seen as an important factor in the distribution and utilization of productive resources worldwide. In the agricultural sector, gender differential could influence the sourcing and efficient utilization of factors of production, particularly in the livestock sub-sector of the economy. This study assessed the gender differentials in economic and technical efficiency of poultry eggs production in Lagos State, Nigeria. Multistage sampling technique was used to select respondent poultry farmers. The first and second stages were the purposive selection of five Local Government Areas (LGAs reputed for poultry production and farm settlements in the state. The third stage involved a simple random sampling of 150 poultry farms consisting of 75 farms each managed by a male and a female Stochastic Frontier Analysis (SFA. The SFA revealed that for male management of poultry egg farms, labour input (p<0.01 and cost of medications (p<0.05 increased the poultry egg output. On the other hand, for female management, stock of birds (p<0.01, labour input (p<0.01 and feed cost (p<0.01 were the factors that increased poultry eggs output. The inefficiency model revealed that male farmers were more technically efficient (p<0.01 than female counterparts. Female managed poultry farms had less productivity (0.90 compared to males(1.22. However, 88.1% of male farms compared to 86.7% of female farms had economic efficiency ratios between 0.29 and 0.79. The study concluded that gender had impact on poultry farmers’ efficiency in the study area. The study therefore recommended that training should be organised for female managed farms while male managed farms should utilize less of cost intensive capital input.

Fourth Annual Report on Energy Efficiency

International Nuclear Information System (INIS)

Di Franco, Nino; Bertini, Ilaria; Federici, Alessandro; Moneta Roberto

2015-01-01

Here we present the main elements of the annual report on energy efficiency 2015. The results indicate that, thanks to national policies for energy efficiency, Italy saved over 7.5 million tons of oil equivalent per year in the period 2005-2013. Compared to the National Plan for Energy Efficiency 2014, the report shows that the 2020 objectives have already been achieved for more than 20%, with residential (35.7% of the target) and industry (26.6%) among the sectors that contributed most to this result. Substantial savings could result from the agribusiness sector through the dissemination of efficient technologies in the logistics and large retail chains. A key role lies with the banks: 86% of banks has developed products dedicated to efficiency, necessitating guidelines for replicability of projects, and audit and rating to assess their quality [it

Commercial effectiveness assessment of implementation the energy efficiency raising of the building project due to introduction of automatic heat consumption control

Directory of Open Access Journals (Sweden)

Zvonareva Yu.N.

2017-01-01

Full Text Available Introduction of the automated metering stations and regulation (AUU located directly in the heated building besides creation of comfortable conditions indoors leads to decrease in consumption of thermal energy. The annual expected effect of realization of the offered actions (installation of metering stations and automatic control can make up to 22% consumed and that isn–t less important, the paid thermal energy. In general, efficiency of implementation of the project on introduction of AUU can be characterized by considerable decrease in heat consumption of the building and, respectively, reduction of a payment for the consumed energy resources. In this paper we evaluated the effectiveness of implementation of increase of energy efficiency of the building investment project (hereinafter SP. We calculated the ratio of expenses and the results considered actions for inhabitants of an apartment house located in Kazan after installation of a weather-dependent regulation. As a result of calculation of the imitating model created on the basis of basic data and the investment project plan the main results of determination of economic efficiency of the Project have been received. For the analysis and increase of reliability of a settlement assessment of efficiency of the investment project calculations at different options of a set of basic data are executed.

Assessing the Efficiency of Phenotyping Early Traits in a Greenhouse Automated Platform for Predicting Drought Tolerance of Soybean in the Field.

Science.gov (United States)

Peirone, Laura S; Pereyra Irujo, Gustavo A; Bolton, Alejandro; Erreguerena, Ignacio; Aguirrezábal, Luis A N

2018-01-01

Conventional field phenotyping for drought tolerance, the most important factor limiting yield at a global scale, is labor-intensive and time-consuming. Automated greenhouse platforms can increase the precision and throughput of plant phenotyping and contribute to a faster release of drought tolerant varieties. The aim of this work was to establish a framework of analysis to identify early traits which could be efficiently measured in a greenhouse automated phenotyping platform, for predicting the drought tolerance of field grown soybean genotypes. A group of genotypes was evaluated, which showed variation in their drought susceptibility index (DSI) for final biomass and leaf area. A large number of traits were measured before and after the onset of a water deficit treatment, which were analyzed under several criteria: the significance of the regression with the DSI, phenotyping cost, earliness, and repeatability. The most efficient trait was found to be transpiration efficiency measured at 13 days after emergence. This trait was further tested in a second experiment with different water deficit intensities, and validated using a different set of genotypes against field data from a trial network in a third experiment. The framework applied in this work for assessing traits under different criteria could be helpful for selecting those most efficient for automated phenotyping.

Assessing the Efficiency of Phenotyping Early Traits in a Greenhouse Automated Platform for Predicting Drought Tolerance of Soybean in the Field

Directory of Open Access Journals (Sweden)

Laura S. Peirone

2018-05-01

Full Text Available Conventional field phenotyping for drought tolerance, the most important factor limiting yield at a global scale, is labor-intensive and time-consuming. Automated greenhouse platforms can increase the precision and throughput of plant phenotyping and contribute to a faster release of drought tolerant varieties. The aim of this work was to establish a framework of analysis to identify early traits which could be efficiently measured in a greenhouse automated phenotyping platform, for predicting the drought tolerance of field grown soybean genotypes. A group of genotypes was evaluated, which showed variation in their drought susceptibility index (DSI for final biomass and leaf area. A large number of traits were measured before and after the onset of a water deficit treatment, which were analyzed under several criteria: the significance of the regression with the DSI, phenotyping cost, earliness, and repeatability. The most efficient trait was found to be transpiration efficiency measured at 13 days after emergence. This trait was further tested in a second experiment with different water deficit intensities, and validated using a different set of genotypes against field data from a trial network in a third experiment. The framework applied in this work for assessing traits under different criteria could be helpful for selecting those most efficient for automated phenotyping.

Assessing Efficiency of Prompts Based on Learner Characteristics

Directory of Open Access Journals (Sweden)

Joy Backhaus

2017-02-01

Full Text Available Personalized prompting research has shown the significant learning benefit of prompting. The current paper outlines and examines a personalized prompting approach aimed at eliminating performance differences on the basis of a number of learner characteristics (capturing learning strategies and traits. The learner characteristics of interest were the need for cognition, work effort, computer self-efficacy, the use of surface learning, and the learner’s confidence in their learning. The approach was tested in two e-modules, using similar assessment forms (experimental n = 413; control group n = 243. Several prompts which corresponded to the learner characteristics were implemented, including an explanation prompt, a motivation prompt, a strategy prompt, and an assessment prompt. All learning characteristics were significant correlates of at least one of the outcome measures (test performance, errors, and omissions. However, only the assessment prompt increased test performance. On this basis, and drawing upon the testing effect, this prompt may be a particularly promising option to increase performance in e-learning and similar personalized systems.

Molecular and Genomic Characterization of Enteric Pathogens Circulating during Hajj

KAUST Repository

Alsomali, Mona

2016-05-01

Hajj, the annual Muslim pilgrimage to Mecca, Saudi Arabia is a unique mass gathering event that attracts approximately 3 million pilgrims from around the globe. This diverse pilgrim population coupled with the nature of the performed activities raise major public health concerns in the host country with potential global implications. Although gastroenteritis and diarrhea are common among the pilgrims performing Hajj, the microbial etiologies of these infections are still unknown. We used molecular and antigenic approaches to identify the main pathogens associated with Hajj diarrhea. 544 fecal samples from pilgrims suffering from diarrhea whilst performing Hajj during three consecutive seasons (2011-2013) and 99 control samples from 2011 were screened for 16 pathogens that include bacterial, parasitic and viral etiologies that are commonly associated with diarrheal infections. At least one of the screened pathogens could be detected in 42% (n=228) of the samples from the diarrheal cases. Bacteria were the main agents detected in 83% (n=189) of the positive samples, followed by viral and parasitic agents detected in 6% (n=14) and 5% (n=12) respectively. We have also standardized a 16S-based metagenomic approach to identify the gut microbiome in diarrheal cases and non-diarrheal controls in 76 samples. Also, we have standardized a shotgun metagenomics protocol for the direct characterization (diagnosis) of enteric pathogens without cultivation. This approach was used successfully to identify viral (adenovirus) and bacterial causes of Enterotoxigenic E. coli diarrhea from Hajj samples. The findings in this study fill in clear gaps in our knowledge of the etiologies associated with diarrheal infections during Hajj. Foodborne bacteria were the major contributors to Hajj-diarrheal infections. This was coupled with the increased incidences of antimicrobial resistance loci associated with the identified bacteria. These findings would help the public health policy makers to

A study on technical efficiency of a DMU (review of literature)

Science.gov (United States)

Venkateswarlu, B.; Mahaboob, B.; Subbarami Reddy, C.; Sankar, J. Ravi

2017-11-01

In this research paper the concept of technical efficiency (due to Farell) [1] of a decision making unit (DMU) has been introduced and the measure of technical and cost efficiencies are derived. Timmer’s [2] deterministic approach to estimate the Cobb-Douglas production frontier has been proposed. The idea of extension of Timmer’s [2] method to any production frontier which is linear in parameters has been presented here. The estimation of parameters of Cobb-Douglas production frontier by linear programming approach has been discussed in this paper. Mark et al. [3] proposed a non-parametric method to assess efficiency. Nuti et al. [4] investigated the relationships among technical efficiency scores, weighted per capita cost and overall performance Gahe Zing Samuel Yank et al. [5] used Data envelopment analysis to assess technical assessment in banking sectors.

77 FR 1950 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2012-01-12

..., Wind Turbine Blade Division. 80,512 Pilgrim's Pride Dallas, TX Corporation. I hereby certify that the........... February 13, 2010. Inc. 81,009 Birds Eye Foods, LLC, Fulton, NY February 13, 2010. Fulton, NY Plant...

Kuu filmid / toimetanud Maria Ulfsak-Šeripova

Index Scriptorium Estoniae

2010-01-01

Eesti Filmiajakirjanike Ühingu ajakirjanike koostatud filmiprogrammist kinos Artis, Uue Saksa kino festivalist 6.-12. okt. ja režissöör Edgar Wright'i filmist "Scott Pilgrim terve maailma vastu" (USA 2010)

The Total Energy Efficiency Index for machine tools

International Nuclear Information System (INIS)

Schudeleit, Timo; Züst, Simon; Weiss, Lukas; Wegener, Konrad

2016-01-01

Energy efficiency in industries is one of the dominating challenges of the 21st century. Since the release of the eco-design directive 2005/32/EC in 2005, great research effort has been spent on the energy efficiency assessment for energy using products. The ISO (International Organization for Standardization) standardization body (ISO/TC 39 WG 12) currently works on the ISO 14955 series in order to enable the assessment of energy efficient design of machine tools. A missing piece for completion of the ISO 14955 series is a metric to quantify the design of machine tools regarding energy efficiency based on the respective assembly of components. The metric needs to take into account each machine tool components' efficiency and the need-oriented utilization in combination with the other components while referring to efficiency limits. However, a state of the art review reveals that none of the existing metrics is feasible to adequately match this goal. This paper presents a metric that matches all these criteria to promote the development of the ISO 14955 series. The applicability of the metric is proven in a practical case study on a turning machine. - Highlights: • Study for pushing forward the standardization work on the ISO 14955 series. • Review of existing energy efficiency indicators regarding three basic strategies to foster sustainability. • Development of a metric comprising the three basic strategies to foster sustainability. • Metric application for quantifying the energy efficiency of a turning machine.

Assessing the efficiency versus the inefficiency of the energy sectors in formerly centrally planned economies

Energy Technology Data Exchange (ETDEWEB)

Vorsatz, D. [Lawrence Berkeley Laboratory, CA (United States)

1995-12-01

As much the extreme inefficiency of Eastern European energy sectors is emphasized, as little attention their relatively efficient aspects receive. Indeed, a few efficiency indicators show the highest global efficiencies for the formerly centrally planned economies, such as the overall primary to useful energy efficiency. These figures draw the attention to an underestimated feature of former socialist energy sectors and to crucial policy implications: in some respects central planning lead to a more efficient use of energy than the market economy. Consequently, if transitions from the central planning to the market economy are not managed carefully, further reductions in energy efficiency can be expected in some sectors of the economy.

Assessment of Technical Efficiency of Public Sector Banks in India Using Data Envelopment Analysis

Directory of Open Access Journals (Sweden)

Aparna BHATIA

2015-05-01

Full Text Available The main aim of the paper is to analyze technical efficiency of Public Sector Banks (PSBs in India during the period 1990-91 to 2011-12. The paper also examines whether there is statistically significant difference in efficiency of PSBs in the reformatory era (1990-91 to 2000-01 as compared to the post reformatory era (2001-02 to 2011-12. Using CAMEL framework, the paper also investigates the determinants of efficiency of PSBs. The results show that PSBs exhibit higher mean of the efficiency parameters in post reformatory era (2001-02 to 2011-12 than in the reformatory era (1990-91 to 2000-01. PSBs inefficiency is attributed to Pure Technical Inefficiency in reformatory era whereas the same is accredited to scale inefficiency in the post reformatory era. Paired t test shows that there is significant difference in performance of Public Sector Banks in reformatory era and post reformatory in all the Efficiency parameters. The results of Panel Data TOBIT regression suggest that various CAMEL parameters have significant impact on the technical efficiency of PSBs.

Efficiency of Saffron Farmers in Shahyk Region of Ghaen City, Iran (Application of Data Envelopment Analysis Using the Efficient and Inefficient Frontiers

Directory of Open Access Journals (Sweden)

Karim Naderi Mahdei

2015-10-01

Full Text Available Addressing the special conditions of saffron growing areas, and planning the optimum use of its production factors need specific attention and determination of the efficiency of saffron farms seems to be necessary. Thus, the current study attempts to measure the efficiency of saffron fields by using bounded data envelopment analysis to give an overall assessment of the performance of the farms. The necessary data was collected by interviewing and filling 36 questionnaires by the saffron farmers of the city of Ghaen, Iran and the data were analyzed by GAMS software. The results showed that average optimistic output and input oriented efficiency is 1.259 and 0.849, respectively. Also, 13.8% of the farms are located on the inefficiency frontiers. 47 percent of the farms are surrounded by efficient and inefficient frontier that reflects the overuse of inputs and potential to produce more and reduce the use of inputs. According to the results, it may be suggested that the efficient farms should be considered as a pattern and we should present training of need assessment in inefficient farms in order to enhance farmers’ efficiency with appropriate and scientific planning.

Awe: An Important Emotional Experience in Sustainable Tourism

Directory of Open Access Journals (Sweden)

Dong Lu

2017-11-01

Full Text Available “Awesome” is one of the most highly desirable experiences for tourists. This study investigates how tourists’ awe emotion is induced when tourists visit sacred mountains and how the awe experience influences their satisfaction. A survey is administrated at a famous sacred mountain in China—Mount Emei. Results reveal that the awe experience is more elicited by the perceived vastness of natural environment for secular tourists, while is more encouraged by the perceived sanctity of religious ambience for pilgrim tourists. Awe experience is a mediator between the sense of perceptual vastness/sanctity and tourists’ satisfaction. The mediation relationships through awe experience are moderated by the visitor types (pilgrims and secular tourists. Findings suggest that destination marketers should apply tourism strategies to encourage tourists’ sense of awe.

Efficiency of working memory: Theoretical concept and practical application

OpenAIRE

Lalović Dejan

2008-01-01

Efficiency of working memory is the concept which connects psychology of memory with different fields of cognitive, differential and applied psychology. In this paper, the history of interest for the assessment of the capacity of short-term memory is presented in brief, as well as the different methods used nowadays to assess the individual differences in the efficiency of working memory. What follows is the consideration of studies that indicate the existence of significant links between the...

National energy efficiency programme

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper focusses on energy conservation and specifically on energy efficiency which includes efficiency in the production, delivery and utilisation of energy as part of the total energy system of the economy. A National Energy Efficiency Programme is being launched in the Eighth Plan that will take into account both macro level and policy and planning considerations as well as micro level responses for different category of users in the industry, agriculture, transport and domestic sectors. The need for such a National Energy Efficiency Programme after making an assessment of existing energy conservation activities in the country is discussed. The broad framework and contents of the National Energy Efficiency Programme have been outlined and the Eighth Plan targets for energy conservation and their break-up have been given. These targets, as per the Eighth Plan document are 5000 MW in electricity installed capacity and 6 million tonnes of petroleum products by the terminal year of the Eighth Plan. The issues that need to be examined for each sector for achieving the above targets for energy conservation in the Eighth Plan are discussed briefly. They are: (a) policy and planning, (b) implementation arrangements which include the institutional setup and selective legislation, (c) technological requirements, and (d) resource requirements which include human resources and financial resources. (author)

Span efficiency in hawkmoths.

Science.gov (United States)

Henningsson, Per; Bomphrey, Richard J

2013-07-06

Flight in animals is the result of aerodynamic forces generated as flight muscles drive the wings through air. Aerial performance is therefore limited by the efficiency with which momentum is imparted to the air, a property that can be measured using modern techniques. We measured the induced flow fields around six hawkmoth species flying tethered in a wind tunnel to assess span efficiency, ei, and from these measurements, determined the morphological and kinematic characters that predict efficient flight. The species were selected to represent a range in wingspan from 40 to 110 mm (2.75 times) and in mass from 0.2 to 1.5 g (7.5 times) but they were similar in their overall shape and their ecology. From high spatio-temporal resolution quantitative wake images, we extracted time-resolved downwash distributions behind the hawkmoths, calculating instantaneous values of ei throughout the wingbeat cycle as well as multi-wingbeat averages. Span efficiency correlated positively with normalized lift and negatively with advance ratio. Average span efficiencies for the moths ranged from 0.31 to 0.60 showing that the standard generic value of 0.83 used in previous studies of animal flight is not a suitable approximation of aerodynamic performance in insects.

76 FR 72077 - Thanksgiving Day, 2011

Science.gov (United States)

2011-11-21

... generously extending their knowledge of local game and agriculture to the Pilgrims, and today we renew our... us offer gratitude to our men and women in uniform for their many sacrifices, and keep in our...

ALTERNATIVES TO IMPROVE HYBRIDIZATION EFFICIENCY IN Eucalyptus BREEDING PROGRAMS

Directory of Open Access Journals (Sweden)

Roselaine Cristina Pereira

2002-01-01

Full Text Available Simple and quick hybridization procedures and ways to keep pollen grains viable for long periods are sought in plant breeding programs to provide greater work flexibility. The presentstudy was carried out to assess the efficiency of pollinations made shortly after flower emasculationand the viability of stored pollen from Eucalyptus camaldulensis and Eucalyptus urophylla clones cultivated in Northwestern Minas Gerais State. Controlled pollinations were carried out at zero, one,three, five and seven days after emasculation. Hybridization efficiency was assessed by thepercentage of viable fruits, number of seeds produced per fruit, percentage of viable seeds and also bycytological observation of the pollen development along the style. Flower buds from clones of the twospecies were collected close to anthesis to assess the viability of pollen grain storage. Pollen was thencollected and stored in a freezer (-18oC for 1, 2 and 3 months. Pollen assessed was carried out by invitro and in vivo germination tests. The efficiency of the pollinations varied with their delay and alsobetween species. The greatest pollination efficiency was obtained when they were carried out on thethird and fifth day after emasculation, but those performed simultaneously with emasculationproduced enough seeds to allow this practice in breeding programs. The decrease in pollen viabilitywith storage was not sufficiently significant to preclude the use of this procedure in artificialhybridization.

Efficiency of portable chlorophyll meters in assessing the nutritional status of wheat plants

Directory of Open Access Journals (Sweden)

Alessana F. Schlichting

2015-12-01

Full Text Available ABSTRACT The objective of this study was to verify the efficiency of two portable chlorophyll meters (Minolta SPAD® 502 and Falker ClorofiLOG® 1030 in assessing the nutritional status of wheat plants, correlating the indices from the devices and the direct determination of chlorophyll content with the concentration of nitrogen (N in the plant. The experiment was conducted in a greenhouse, in pots with 5 dm3 of Oxisol, in a completely randomized design, with six N doses (0, 80, 160, 240, 320 and 400 mg dm-3 and five replicates. At 47 days after emergence, the readings of SPAD and Falker indices and the quantification of chlorophyll content and N concentration in wheat plants were performed, as well as analysis of variance and correlation test, both at 0.05 probability level. The chlorophyll meters Minolta SPAD® 502 and Falker ClorofiLOG® 1030 do not differ with respect to the indirect determination of chlorophyll in wheat plants. The Falker chlorophyll index was statistically equal to the chlorophyll content. Indirect chlorophyll indices and chlorophyll content showed a high correlation with the N concentration in the plant.

In vitro assessment of cytotoxicity and labeling efficiency of 99mTc-HMPAO with stromal vascular fraction of adipose tissue

International Nuclear Information System (INIS)

Verma, V.K.; Beevi, S.S.; Tabassum, A.; Kumaresan, K.; Kamaraju, R.S.; Arbab, A.S.; Chelluri, L.K.

2014-01-01

Introduction: Noninvasive radionuclide imaging of cells using technetium99m-hexamethylpropyleneamine oxime ( 99m Tc-HMPAO) is a potential diagnostic tool for several applications. Herein we aimed to evaluate the labeling efficiency and cellular toxicity of 99m Tc-HMPAO with Stromal Vascular Fraction (SVF) of adipose tissue to develop a process tool for theranostic purposes, in particular imaging cardiac stem cell therapy. Methods: Ten million cells of SVF were labeled with 99m Tc-HMPAO complex and excess radiolabel was cleared off through washing in PBS. The labeling efficiency of 99m Tc-HMPAO was detected in labeled cells and their subsequent supernatant wash using isotope dose calibrator and gamma camera. The cytotoxicity was assessed for the comparative reactive oxygen species (ROS) by H 2 DCFDDA, apoptotic events by annexin-V and TUNEL assay and mitochondrial potential by JC-1. Results: An encouraging labeling efficiency of 33% was observed with 99m Tc-HMPAO complex. The radionuclide labeling of SVF demonstrated significant safety profile as evaluated by apoptotic assays. Conclusion: 99m Tc-HMPAO labeling efficiency of 33% of total SV fraction would produce sufficient radioactive signals that would enable for in vivo tracking of cells by SPECT-CT. The radionuclide did not demonstrate any significant impact on the structural or functional organization of the labeled cells. Our study indicates that SVF can be safely labeled with 99m Tc-HMPAO without adverse cytotoxic events and for its potential role in imaging cardiac stem cell therapy

A successful application of homotopy perturbation method for efficiency and effectiveness assessment of longitudinal porous fins

International Nuclear Information System (INIS)

Cuce, Erdem; Cuce, Pinar Mert

2015-01-01

Highlights: • Homotopy perturbation method has been applied to porous fins. • Dimensionless efficiency and effectiveness expressions have been firstly developed. • Effects of porous and convection parameters on thermal analysis have been clarified. • Ratio of porous fin to solid fin heat transfer rate has been given for various cases. • Reliability and practicality of homotopy perturbation method has been illustrated. - Abstract: In our previous works, thermal performance of straight fins with both constant and temperature-dependent thermal conductivity has been investigated in detail and dimensionless analytical expressions of fin efficiency and fin effectiveness have been developed for the first time in literature via homotopy perturbation method. In this study, previous works have been extended to porous fins. Governing equations have been formulated by performing Darcy’s model. Dimensionless temperature distribution along the length of porous fin has been determined as a function of porosity and convection parameters. The ratio of porous fin to solid fin heat transfer rate has also been evaluated as a function of thermo-geometric fin parameter. The results have been compared with those of finite difference method for a specific case and an excellent agreement has been observed. The expressions developed are beneficial for thermal engineers for preliminary assessment of thermophysical systems instead of consuming time in heat conduction problems governed by strongly nonlinear differential equations

Turkey's energy efficiency assessment: White Certificates Systems and their applicability in Turkey

International Nuclear Information System (INIS)

Duzgun, B.; Komurgoz, G.

2014-01-01

The last decade has seen an increase in the importance of energy efficiency and the sustainable use of energy resources due to their significant benefits for reducing a country's dependence on foreign energy resources and increasing awareness on environmental problems. Turkey aims to reduce its energy intensity by 20% up to 2023, and in order to accomplish this target, the country plans to use energy more effectively in various industries and develop financial mechanisms for energy efficiency. Although much effort has been made to improve energy efficiency, additional policies such as marked-based incentives are still necessary. This article deals with one of the many market-based energy efficiency policies, called Tradable White Certificates (WhC) or Energy Efficiency Obligations. The current situation of the energy field in Turkey and energy consumption by industries is presented first in this paper, followed by potentials for energy efficiency in each industry and energy efficiency policies. Furthermore, the theory and applicability of a WhC System is introduced and discussed in terms of market conditions, choice of obligated participants and market mechanisms and barriers for the Turkish electricity and natural gas market to benefit from the residential and industrial energy savings potential. - Highlights: • Energy efficiency is the most effective way to reduce foreign energy dependency. • Turkey aims reducing at least 20% of energy intensity in the year 2023. • Energy consumption of industry is 35% of total energy consumption in Turkey. • Marked based policy elements create new opportunities in environmental markets. • WhC System can be implemented in PMUM under the control of regulatory authority

Theoretical Grounds of Identification of the Essence of the Enterprise Development Efficiency Category

Directory of Open Access Journals (Sweden)

Adzhavenko Maryna M.

2014-02-01

Full Text Available Modern economic conditions put a new problem in front of scientists, namely: capability of an enterprise to survive in the unfavourable external environment. This problem is a system and complex one and its solution is within the plane of management of capital, personnel, development, efficiency, etc. The article marks out that efficiency is a corner stone of the modern economic science, which justifies studies of the gnoseological essence of the efficiency category. The main goal of the article lies in the study of scientific and theoretical grounds of formation of the enterprise development efficiency under modern conditions of the changing internal and external environments. The other goals of the article are identification of the essence of the development efficiency category, deepening the theoretical foundation of assessment of efficiency of enterprise development in the modern economic science. The article conducts an ontological analysis of the essence and goals of the enterprise development efficiency notion, studies evolution of scientific approaches and systemises theoretical provisions of the specified category and their assessment in the economic science. In the result of the study the article identifies a new vector of theoretical grounds and dominating logic of formation of the methodology of assessment of efficiency of enterprises under conditions of innovation development of the state, namely: it underlines principles of systemacy, complexity, self-organisation, significance of human capital as an important factor of increase of efficiency and development. Development of methodological grounds of assessment of efficiency of enterprise innovation development is a prospective direction of further studies.

Technical support document: Energy efficiency standards for consumer products: Refrigerators, refrigerator-freezers, and freezers including draft environmental assessment, regulatory impact analysis

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

The Energy Policy and Conservation Act (P.L. 94-163), as amended by the National Appliance Energy Conservation Act of 1987 (P.L. 100-12) and by the National Appliance Energy Conservation Amendments of 1988 (P.L. 100-357), and by the Energy Policy Act of 1992 (P.L. 102-486), provides energy conservation standards for 12 of the 13 types of consumer products` covered by the Act, and authorizes the Secretary of Energy to prescribe amended or new energy standards for each type (or class) of covered product. The assessment of the proposed standards for refrigerators, refrigerator-freezers, and freezers presented in this document is designed to evaluate their economic impacts according to the criteria in the Act. It includes an engineering analysis of the cost and performance of design options to improve the efficiency of the products; forecasts of the number and average efficiency of products sold, the amount of energy the products will consume, and their prices and operating expenses; a determination of change in investment, revenues, and costs to manufacturers of the products; a calculation of the costs and benefits to consumers, electric utilities, and the nation as a whole; and an assessment of the environmental impacts of the proposed standards.

Micronized copper wood preservatives: An efficiency and potential health risk assessment for copper-based nanoparticles

International Nuclear Information System (INIS)

Civardi, Chiara; Schwarze, Francis W.M.R.; Wick, Peter

2015-01-01

Copper (Cu) is an essential biocide for wood protection, but fails to protect wood against Cu-tolerant wood-destroying fungi. Recently Cu particles (size range: 1 nm–25 μm) were introduced to the wood preservation market. The new generation of preservatives with Cu-based nanoparticles (Cu-based NPs) is reputedly more efficient against wood-destroying fungi than conventional formulations. Therefore, it has the potential to become one of the largest end uses for wood products worldwide. However, during decomposition of treated wood Cu-based NPs and/or their derivate may accumulate in the mycelium of Cu-tolerant fungi and end up in their spores that are dispersed into the environment. Inhaled Cu-loaded spores can cause harm and could become a potential risk for human health. We collected evidence and discuss the implications of the release of Cu-based NPs by wood-destroying fungi and highlight the exposure pathways and subsequent magnitude of health impact. - Highlights: • We compared copper particulate wood preservatives with conventional ones. • We assessed the fungicidal activity of particulate copper wood preservatives. • We reviewed the Cu-tolerance mechanisms of some wood-destroying fungi. • Fungi colonizing wood treated with particulate copper may release Cu-loaded spores. - We assess the fungicidal activity of particulate copper wood preservatives and their possible release in the air by Cu-tolerant wood-destroying fungi

Efficiency of Crobex and Crobex10 Stock Market Indicies

Directory of Open Access Journals (Sweden)

Armin Habibovic

2017-12-01

Full Text Available The work of Haugen and Baker (1991 and Grinold (1992 has shown that market capitalisation-weighted indices are not mean-variance efficient. Further research by Amenc, Goltz, and Le Sourd (2006 proves that even naïve equal weighting can offer a better risk to return trade-off to investors in the developed markets. Based on earlier research findings of Zoricic, Dolinar, and Kozul (2014 and Dolinar, Zoricic and Kozul (2017 for the Croatian market which demonstrated that outperforming the cap-weighted index in an illiquid and undeveloped market is much more challenging the aim of this paper is to assess the efficiency of both CROBEX and CROBEX10 stock market indices. Efficient frontier was derived based on historical data (“ex post” for 5 revisions for each index. The distance from the efficient frontier was calculated revealing weaker efficiency but also greater diversification opportunities in the case of the broader CROBEX index. However, lower efficiency gains and higher estimation error in emerging market environment reduce significantly the out-ofsample potential for efficient index benchmarks. The analysis conducted in this paper makes it hard to assess if such potential truly exists but provides an insight based on calculation of indifference transaction costs following the work of Amenc et al. (2011.

Multi-Directional Non-Parametric Analysis of Agricultural Efficiency

DEFF Research Database (Denmark)

Balezentis, Tomas

This thesis seeks to develop methodologies for assessment of agricultural efficiency and employ them to Lithuanian family farms. In particular, we focus on three particular objectives throughout the research: (i) to perform a fully non-parametric analysis of efficiency effects, (ii) to extend...... to the Multi-Directional Efficiency Analysis approach when the proposed models were employed to analyse empirical data of Lithuanian family farm performance, we saw substantial differences in efficiencies associated with different inputs. In particular, assets appeared to be the least efficiently used input...... relative to labour, intermediate consumption and land (in some cases land was not treated as a discretionary input). These findings call for further research on relationships among financial structure, investment decisions, and efficiency in Lithuanian family farms. Application of different techniques...

Accountability Feedback Assessments for Improving Efficiency of Nuclear Regulatory Institutions

International Nuclear Information System (INIS)

Lavarenne, J.

2016-01-01

The Fukushima-Daiichi Disaster demonstrated the need of assessing and strengthening institutions involved in nuclear safety, including the accountability of nuclear regulators. There are a few problems hindering the path towards a greater understanding of systems of accountability, the ensemble of mechanisms holding to account the nuclear regulator on behalf of the public. There is no consensus on what it should deliver and no systematic method of assessment exists. This poster proposes a definition of an effective accountability system and a method of assessment of institutions based on defence in depth concepts and inspired from risk-assessment techniques used in the nuclear industry. Finally it presents a simple Monte-Carlo simulation that illustrates the inner workings of the method of assessment and shows the kind of results it will be able to supply. (author)

Efficient assessment of modified nucleoside stability under conditions of automated oligonucleotide synthesis: characterization of the oxidation and oxidative desulfurization of 2-thiouridine.

Science.gov (United States)

Sochacka, E

2001-01-01

In order to efficiently assess the chemical stability of modified nucleosides to the reagents and conditions of automated oligonucleotide synthesis, we designed, developed and tested a scheme in which the modified nucleoside, directly attached to a solid support, is exposed to the cyclic chemistry of the instrument. Stability of 2-thiouridine against different oxidizers was investigated. Tertbutyl hydroperoxide (1 M) in anhydrous acetonitrile was a more effective oxidizer for the incorporation of 2-thiouridine into oligonucleotide chains than the same oxidizer in methylene chloride. Carbon tetrachloride/water in the presence of a basic catalyst was superior in maintaining the thiocarbonyl function, but its utility for RNA synthesis has yet to be fully tested, whereas 2-phenylsulfonyloxaziridine was a very efficient reagent for oxidative desulfurization of 2-thiouridine.

181 checklist and assessment of efficiency of some traditional gears

African Journals Online (AJOL)

Department of Fisheries And Aquaculture, University Of Agriculture, P.M.B. 2373,. Makurdi ... The efficiency and use of the gears and crafts was also seasonally ... water, fishing extensively with baskets and ... improved by the introduction of a few .... Fish Culture in undrainable ponds. Reed W, J. Burchard, A.J Hopson and J.

Efficiency and Integration in the Food Supply Chain

Directory of Open Access Journals (Sweden)

Sebastian Jarzebowski

2013-11-01

Full Text Available Due to the nature of the food supply chain, an increase of the integration's degree in the chain may be an important aspect in the context of increasing the efficiency of agri-food companies. Therefore, exploring the relationships among these variables was found as an important research area and adopted as the goal of the paper. The paper is focused mainly on the theoretical background showing the relationship between integration and performance. A description of the theoretical and methodological aspects of performance measurement and its extension (including the integration aspect was also made within the framework of the paper.For an empirical illustration of the analyzed relationships two steps were made. Firstly, the integration's degree in the food chain was measured. Secondly, the efficiency of the companies from the cereals processing industry in Europe was assessed. The SFA models (e.g. Translog and Cobb-Douglas functional form were used for assessment of efficiency. By using stochastic method (e.g. the SFA, Stochastic Frontier Analysis, one may show the influence of external variable (the integration in the supply chain on the efficiency performance of enterprises. Efficiency of economic entities is not an unambiguous term. There are several different concepts of efficiency, its measurement and expressions. Within the framework of efficiency, many terms of similar meaning may be applied. However, these concepts are not identical. The actual concept of efficiency is derived from the structure of the production function, therefore it is conditioned by changes in the productivity of production factors and their remuneration and refers to the allocation of production factors in the most technically efficient way.

Propulsive efficiency and non- expert swimmers performance

Directory of Open Access Journals (Sweden)

Tiago Barbosa

2009-12-01

Full Text Available Propulsive efficiency is one of the most interesting issues for competitive swimming researchers, has it presents significant relationships with the swimmer’s biophysical behavior and his/her performance. Although propulsive efficiency is a variable that has been quite studied in elite swimmers, there is no research on this issue in young and non-expert swimmers. Thus, the aim of this study was to: (i estimate the propulsive efficiency on non-expert swimmers; (ii identify biomechanical and anthropometrical parameters that are associated with propulsive efficiency; (iii identify the association between the propulsive efficiency and swim performance. Twenty-eight non-expert swimmers participated on this study. It was assessed the propulsive efficiency, biomechanical and anthropometrical parameters, as well as, the swim performance. The propulsive efficiency of non-expert swimmers is lower than data reported in the literature to higher competitive levels swimmers and there are no significant differences between boys and girls. It was also noted that several biomechanical and anthropometrical parameters, as well as, the swim performance are associated with the propulsive efficiency.

Costs and benefits of energy efficiency improvements in ceiling fans

Energy Technology Data Exchange (ETDEWEB)

Shah, Nihar; Sathaye, Nakul; Phadke, Amol; Letschert, Virginie [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technology Division

2013-10-15

Ceiling fans contribute significantly to residential electricity consumption, especially in developing countries with warm climates. The paper provides analysis of costs and benefits of several options to improve the efficiency of ceiling fans to assess the global potential for electricity savings and green house gas (GHG) emission reductions. Ceiling fan efficiency can be cost-effectively improved by at least 50% using commercially available technology. If these efficiency improvements are implemented in all ceiling fans sold by 2020, 70 terawatt hours per year could be saved and 25 million metric tons of carbon dioxide equivalent (CO2-e) emissions per year could be avoided, globally. We assess how policies and programs such as standards, labels, and financial incentives can be used to accelerate the adoption of efficient ceiling fans in order to realize potential savings.

A quick aphasia battery for efficient, reliable, and multidimensional assessment of language function.

Science.gov (United States)

Wilson, Stephen M; Eriksson, Dana K; Schneck, Sarah M; Lucanie, Jillian M

2018-01-01

This paper describes a quick aphasia battery (QAB) that aims to provide a reliable and multidimensional assessment of language function in about a quarter of an hour, bridging the gap between comprehensive batteries that are time-consuming to administer, and rapid screening instruments that provide limited detail regarding individual profiles of deficits. The QAB is made up of eight subtests, each comprising sets of items that probe different language domains, vary in difficulty, and are scored with a graded system to maximize the informativeness of each item. From the eight subtests, eight summary measures are derived, which constitute a multidimensional profile of language function, quantifying strengths and weaknesses across core language domains. The QAB was administered to 28 individuals with acute stroke and aphasia, 25 individuals with acute stroke but no aphasia, 16 individuals with chronic post-stroke aphasia, and 14 healthy controls. The patients with chronic post-stroke aphasia were tested 3 times each and scored independently by 2 raters to establish test-retest and inter-rater reliability. The Western Aphasia Battery (WAB) was also administered to these patients to assess concurrent validity. We found that all QAB summary measures were sensitive to aphasic deficits in the two groups with aphasia. All measures showed good or excellent test-retest reliability (overall summary measure: intraclass correlation coefficient (ICC) = 0.98), and excellent inter-rater reliability (overall summary measure: ICC = 0.99). Sensitivity and specificity for diagnosis of aphasia (relative to clinical impression) were 0.91 and 0.95 respectively. All QAB measures were highly correlated with corresponding WAB measures where available. Individual patients showed distinct profiles of spared and impaired function across different language domains. In sum, the QAB efficiently and reliably characterized individual profiles of language deficits.

Army Aviation in the National Guard: Assessing for Efficiency and Effectiveness

National Research Council Canada - National Science Library

Gattis, Karen D

2009-01-01

...). This SRP examines Army National Guard Aviation to determine if the force structure can remain balanced as an effective and efficient operational force while maintaining the OPTEMPO in support of GWOT...

Industrial wastewater treatment with a bioelectrochemical process: assessment of depuration efficiency and energy production.

Science.gov (United States)

Molognoni, Daniele; Chiarolla, Stefania; Cecconet, Daniele; Callegari, Arianna; Capodaglio, Andrea G

2018-01-01

Development of renewable energy sources, efficient industrial processes, energy/chemicals recovery from wastes are research issues that are quite contemporary. Bioelectrochemical processes represent an eco-innovative technology for energy and resources recovery from both domestic and industrial wastewaters. The current study was conducted to: (i) assess bioelectrochemical treatability of industrial (dairy) wastewater by microbial fuel cells (MFCs); (ii) determine the effects of the applied organic loading rate (OLR) on MFC performance; (iii) identify factors responsible for reactor energy recovery losses (i.e. overpotentials). For this purpose, an MFC was built and continuously operated for 72 days, during which the anodic chamber was fed with dairy wastewater and the cathodic chamber with an aerated mineral solution. The study demonstrated that industrial effluents from agrifood facilities can be treated by bioelectrochemical systems (BESs) with >85% (average) organic matter removal, recovering power at an observed maximum density of 27 W m -3 . Outcomes were better than in previous (shorter) analogous experiences, and demonstrate that this type of process could be successfully used for dairy wastewater with several advantages.

Problems of assessment of efficiency of managing corporate rights in joint stock companies

Directory of Open Access Journals (Sweden)

Kurinnyy Oleksandr V.

2013-03-01

Full Text Available The goal of the article lies in identification of specific features of formation, implementation and practical use of the balanced scorecard of efficiency of managing corporate rights in domestic joint stock companies. Complexity of formation of the balanced scorecard of efficiency of managing property of shareholders is due to a necessity of ensuring deliberateness of the combination of financial and non-financial indicators for formalisation of managerial goals, establishment of a connection between financial parameters and operation indicators of enterprise activity and also attempt to determine the whole cost of an enterprise, which would be adequate to the market value of its assets. Taking into account the above, the article defines efficiency of managing shares of the joint stock as the degree of correlation between the goal, regulatory set functions, managerial actions and results of execution of managerial duties by managers. Prospect of further studies in this direction is development of methodical basis of formation and functioning of the balanced scorecard of efficiency of the use of shares of corporate rights in a joint stock company.

Energy efficiency; Energieffektivisering

Energy Technology Data Exchange (ETDEWEB)

2009-06-15

The Low Energy Panel will halve the consumption in buildings. The Panel has proposed a halving of consumption in the construction within 2040 and 20 percent reduction in the consumption in the industry within 2020. The Panel consider it as possible to gradually reduce consumption in buildings from the current level of 80 TWh with 10 TWh in 2020, 25 TWh in 2030 and 40 TWh in 2040. According the committee one such halving can be reached by significant efforts relating to energy efficiency, by greater rehabilitations, energy efficiency in consisting building stock and stricter requirements for new construction. For the industry field the Panel recommend a political goal to be set at least 20 percent reduction in specific energy consumption in the industry and primary industry beyond general technological development by the end of 2020. This is equivalent to approximately 17 TWh based on current level of activity. The Panel believes that a 5 percent reduction should be achieved by the end of 2012 by carrying out simple measures. The Low Energy Panel has since March 2009 considered possibilities to strengthen the authorities' work with energy efficiency in Norway. The wide complex panel adds up proposals for a comprehensive approach for increased energy efficiency in particular in the building- and industry field. The Panel has looked into the potential for energy efficiency, barriers for energy efficiency, assessment of strengths and weaknesses in the existing policy instruments and members of the Panel's recommendations. In addition the report contains a review of theoretical principles for effects of instruments together with an extensive background. One of the committee members have chosen to take special notes on the main recommendations in the report. (AG)

Sampling efficiency of the Moore egg collector

Science.gov (United States)

Worthington, Thomas A.; Brewer, Shannon K.; Grabowski, Timothy B.; Mueller, Julia

2013-01-01

Quantitative studies focusing on the collection of semibuoyant fish eggs, which are associated with a pelagic broadcast-spawning reproductive strategy, are often conducted to evaluate reproductive success. Many of the fishes in this reproductive guild have suffered significant reductions in range and abundance. However, the efficiency of the sampling gear used to evaluate reproduction is often unknown and renders interpretation of the data from these studies difficult. Our objective was to assess the efficiency of a modified Moore egg collector (MEC) using field and laboratory trials. Gear efficiency was assessed by releasing a known quantity of gellan beads with a specific gravity similar to that of eggs from representatives of this reproductive guild (e.g., the Arkansas River Shiner Notropis girardi) into an outdoor flume and recording recaptures. We also used field trials to determine how discharge and release location influenced gear efficiency given current methodological approaches. The flume trials indicated that gear efficiency ranged between 0.0% and 9.5% (n = 57) in a simple 1.83-m-wide channel and was positively related to discharge. Efficiency in the field trials was lower, ranging between 0.0% and 3.6%, and was negatively related to bead release distance from the MEC and discharge. The flume trials indicated that the gellan beads were not distributed uniformly across the channel, although aggregation was reduced at higher discharges. This clustering of passively drifting particles should be considered when selecting placement sites for an MEC; further, the use of multiple devices may be warranted in channels with multiple areas of concentrated flow.

Environmental efficiency analysis of power industry in China based on an entropy SBM model

International Nuclear Information System (INIS)

Zhou, Yan; Xing, Xinpeng; Fang, Kuangnan; Liang, Dapeng; Xu, Chunlin

2013-01-01

In order to assess the environmental efficiency of power industry in China, this paper first proposes a new non-radial DEA approach by integrating the entropy weight and the SBM model. This will improve the assessment reliability and reasonableness. Using the model, this study then evaluates the environmental efficiency of the Chinese power industry at the provincial level during 2005–2010. The results show a marked difference in environmental efficiency of the power industry among Chinese provinces. Although the annual, average, environmental efficiency level fluctuates, there is an increasing trend. The Tobit regression analysis reveals the innovation ability of enterprises, the proportion of electricity generated by coal-fired plants and the generation capacity have a significantly positive effect on environmental efficiency. However the waste fees levied on waste discharge and investment in industrial pollutant treatment are negatively associated with environmental efficiency. - Highlights: ► We assess the environmental efficiency of power industry in China by E-SBM model. ► Environmental efficiency of power industry is different among provinces. ► Efficiency stays at a higher level in the eastern and the western area. ► Proportion of coal-fired plants has a positive effect on the efficiency. ► Waste fees and the investment have a negative effect on the efficiency

Seasonal occurrence, removal efficiencies and preliminary risk assessment of multiple classes of organic UV filters in wastewater treatment plants.

Science.gov (United States)

Tsui, Mirabelle M P; Leung, H W; Lam, Paul K S; Murphy, Margaret B

2014-04-15

Organic ultraviolet (UV) filters are applied widely in personal care products (PCPs), but the distribution and risks of these compounds in the marine environment are not well known. In this study, the occurrence and removal efficiencies of 12 organic UV filters in five wastewater treatment plants (WWTPs) equipped with different treatment levels in Hong Kong, South China, were investigated during one year and a preliminary environmental risk assessment was carried out. Using a newly developed simultaneous multiclass quantification liquid chromatography-tandem mass spectrometry (LC-MS/MS) method, butyl methoxydibenzoylmethane (BMDM), 2,4-dihydroxybenzophenone (BP-1), benzophenone-3 (BP-3), benzophenone-4 (BP-4) and 2-ethyl-hexyl-4-trimethoxycinnamate (EHMC) were frequently (≥80%) detected in both influent and effluent with mean concentrations ranging from 23 to 1290 ng/L and 18-1018 ng/L, respectively; less than 2% of samples contained levels greater than 1000 ng/L. Higher concentrations of these frequently detected compounds were found during the wet/summer season, except for BP-4, which was the most abundant compound detected in all samples in terms of total mass. The target compounds behaved differently depending on the treatment level in WWTPs; overall, removal efficiencies were greater after secondary treatment when compared to primary treatment with >55% and compounds showing high removal (defined as >70% removal), respectively. Reverse osmosis was found to effectively eliminate UV filters from effluent (>99% removal). A preliminary risk assessment indicated that BP-3 and EHMC discharged from WWTPs may pose high risk to fishes in the local environment. Copyright © 2014 Elsevier Ltd. All rights reserved.

The use of efficiency assessment tools : solutions to barriers : Workpackage 3 of the European research project ROSEBUD (Road Safety and Environmental Cost-Benefit and Cost-Effectiveness Analysis for Use in Decision-making).

NARCIS (Netherlands)

Hakkert, A.S. & Wesemann, P. (eds.)

2005-01-01

In road safety, as in most other fields, efficiency is an important criterion in political and professional decision making. Efficiency Assessment Tools (EATs) like Cost Benefit Analysis and Cost Effectiveness Analysis are available to help choose the policy which gives the highest return on

Efficient, equitable and sustainable energy policy in a small open economy: Concepts and assessments

International Nuclear Information System (INIS)

Chang, Youngho; Fang, Zheng

2017-01-01

This study aims to develop three broadly defined concepts of designing and evaluating energy policy of a small open economy, namely, efficiency, equity, and sustainability which are applied to Singapore. By analysing the historical energy and economic data and examining energy policies and programs implemented, this study finds that (1) energy intensity improves over time and three strategies employed to improve energy efficiency - tariffs, deregulation and setting energy standards - are found to have some positive effects. (2) A utility rebate programme is implemented and revised continuously to achieve equity in energy consumption across Singapore households. (3) By the weak concept of sustainability, Singapore is considered marginally sustainable. Institutional, technological and market-based approaches are being implemented to increase energy efficiency, improve energy equity and secure sustainability. - Highlights: • Three concepts of designing and evaluating energy policy are developed. • Efficiency, equity and sustainability are the three concepts. • Three strategies are identified in improving energy efficiency. • A utility rebate programme is to achieve equity in energy consumption across households. • Institutional and market-based approaches are to secure sustainable energy supply.

Structural Reliability: An Assessment Using a New and Efficient Two-Phase Method Based on Artificial Neural Network and a Harmony Search Algorithm

Directory of Open Access Journals (Sweden)

Naser Kazemi Elaki

2016-06-01

Full Text Available In this research, a two-phase algorithm based on the artificial neural network (ANN and a harmony search (HS algorithm has been developed with the aim of assessing the reliability of structures with implicit limit state functions. The proposed method involves the generation of datasets to be used specifically for training by Finite Element analysis, to establish an ANN model using a proven ANN model in the reliability assessment process as an analyzer for structures, and finally estimate the reliability index and failure probability by using the HS algorithm, without any requirements for the explicit form of limit state function. The proposed algorithm is investigated here, and its accuracy and efficiency are demonstrated by using several numerical examples. The results obtained show that the proposed algorithm gives an appropriate estimate for the assessment of reliability of structures.

Design for energy efficiency: Energy efficient industrialized housing research program. Progress report

Energy Technology Data Exchange (ETDEWEB)

Kellett, R.; Berg, R.; Paz, A.; Brown, G.Z.

1991-03-01

Since 1989, the U.S. Department of Energy has sponsored the Energy Efficient Industrialized Housing research program (EEIH) to improve the energy efficiency of industrialized housing. Two research centers share responsibility for this program: The Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. Additional funding is provided through the participation of private industry, state governments and utilities. The program is guided by a steering committee comprised of industry and government representatives. This report summarizes Fiscal Year (FY) 1990 activities and progress, and proposed activities for FY 1991 in Task 2.1 Design for Energy Efficiency. This task establishes a vision of energy conservation opportunities in critical regions, market segments, climate zones and manufacturing strategies significant to industrialized housing in the 21st Century. In early FY 1990, four problem statements were developed to define future housing demand scenarios inclusive of issues of energy efficiency, housing design and manufacturing. Literature surveys were completed to assess seven areas of influence for industrialized housing and energy conservation in the future. Fifty-five future trends were identified in computing and design process; manufacturing process; construction materials, components and systems; energy and environment; demographic context; economic context; and planning policy and regulatory context.

Does automation improve stock market efficiency in Ghana ...

African Journals Online (AJOL)

The automation of the Ghana Stock Exchange (GSE) in 2008, among other reforms, was expected to improve the efficiency of the market. The extent of this truism has, however, not been empirically established for the GSE. In this study, we attempt to assess the impact of the automation on the efficiency of the GSE within the ...

Phase I aging assessment of nuclear air-treatment system high efficiency particulate air and adsorbers

International Nuclear Information System (INIS)

Winegardner, W.K.

1996-01-01

A phase I aging assessment of high efficiency particulate air filters and activated carbon gas adsorption units was performed by the Pacific Northwest Laboratory as part of the US Nuclear Regulatory Commission's Nuclear Plant Aging Research Program. Information was compiled concerning design features, failure experience, aging mechanisms, effects, and stressors, and monitoring methods. Over 1100 failures, or 12% of the filter installations, were reported as part of a US Department of energy survey. Investigators from other laboratories have suggested that aging could have contributed to over 80% of these failures. Several instances of impaired performance as the result of the premature aging of carbon were reported. Filter aging mechanisms range from those associated with particle loading to reactions that alter the properties of gaskets. Mechanisms that can lead to impaired adsorber performance include the loss of potentially available active sites as a result of the adsorption of moisture or pollutants. Stressors include heat, moisture, radiation, and airborne particles and contaminants. (orig.)

Transition I efficiency and victory in volleyball matches

Directory of Open Access Journals (Sweden)

Herbert Ugrinowitsch

2014-03-01

Full Text Available The present study investigated the correlation between Transition Iwith victory in volleyball matches. The 2002 South-American Youth Men's Championship was recorded and the Transition I was analyzed and classified as negative, null or positive. Results of the efficiency in Transition I was calculated using t test for independent samples and compared to the efficiency between teams during each set and matches. Spearman correlation assessed the relationship between efficiency in each set and results of the matches with the final ranking in the championship. The results showed that the winning teams exhibited higher efficiency in Transition I, as well as a positive relationship of higher efficiency in Transition I with all of their results. The higher efficiency in Transition I is related to victory in volleyball matches.

Energy efficiency improvement: A strong driver for Total operations and R and D

Energy Technology Data Exchange (ETDEWEB)

Garnaud, Frederic; Rocher, Anne

2010-09-15

Total has implemented an energy efficiency action plan for both producing fields and new projects linked to a dedicated R and D program. The Energy efficiency assessment methodology is described, with an example: base line of the current situation, energy efficiency plan, contribution to best practices at corporate level. A methodology to assess the energy efficiency of a new development has been defined and implemented within Total. This methodology as well as related indicators is presented. Examples of R and D results dedicated to improve energy efficiency in two major areas of future developments are given: sour gas production and deep offshore field architecture.

The RAE and University Efficiency.

Science.gov (United States)

Mace, John

2000-01-01

Evaluates effects of the new British funding formula for universities, based on the research assessment exercise (RAE). Compares effects of the RAE on two contrasting universities and finds the RAE has dramatically affected university organization, teaching, and research. RAE may have increased efficiency in teaching and research but encourages…

Tuberculosis and mass gatherings-opportunities for defining burden, transmission risk, and the optimal surveillance, prevention, and control measures at the annual Hajj pilgrimage.

Science.gov (United States)

Zumla, Alimuddin; Saeed, Abdulaziz Bin; Alotaibi, Badriah; Yezli, Saber; Dar, Osman; Bieh, Kingsley; Bates, Matthew; Tayeb, Tamara; Mwaba, Peter; Shafi, Shuja; McCloskey, Brian; Petersen, Eskild; Azhar, Esam I

2016-06-01

Tuberculosis (TB) is now the most common infectious cause of death worldwide. In 2014, an estimated 9.6 million people developed active TB. There were an estimated three million people with active TB including 360000 with multidrug-resistant TB (MDR-TB) who were not diagnosed, and such people continue to fuel TB transmission in the community. Accurate data on the actual burden of TB and the transmission risk associated with mass gatherings are scarce and unreliable due to the small numbers studied and methodological issues. Every year, an estimated 10 million pilgrims from 184 countries travel to the Kingdom of Saudi Arabia (KSA) to perform the Hajj and Umrah pilgrimages. A large majority of pilgrims come from high TB burden and MDR-TB endemic areas and thus many may have undiagnosed active TB, sub-clinical TB, and latent TB infection. The Hajj pilgrimage provides unique opportunities for the KSA and the 184 countries from which pilgrims originate, to conduct high quality priority research studies on TB under the remit of the Global Centre for Mass Gatherings Medicine. Research opportunities are discussed, including those related to the definition of the TB burden, transmission risk, and the optimal surveillance, prevention, and control measures at the annual Hajj pilgrimage. The associated data are required to develop international recommendations and guidelines for TB management and control at mass gathering events. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Effect of integrated pest management on controlling zoonotic cutaneous leishmaniasis in Emamzadeh Agha Ali Abbas (AS) District, Isfahan province, 2006-2009.

Science.gov (United States)

Nilforoushzadeh, Mohammad Ali; Shirani-Bidabadi, Leila; Saberi, Sedigheh; Hosseini, Seyed Mohsen; Jaffary, Fariba

2014-01-01

Cutaneous leishmaniasis (CL) is still considered as a health problem in the world. Several methods of control in different regions, together with obtaining integrated information on its natural foci, are needed to decrease its prevalence. This study was designed to evaluate the effects of simultaneous interventions on CL control. A standard questionnaire was used to identify patients among pilgrims to Emamzadeh Agha Ali Abbas (Isfahan Province, Iran). Subsequently, three methods of controlling the disease, including, spraying residential buildings with Baygon, baiting with zinc phosphide poisons, changing the vegetative cover of the region, improving the environment, and mounting a mesh on all doors and windows of buildings in residential areas were used. The control measures were then evaluated by comparing the number of pilgrims affected by CL after and before the interventions. While 23 pilgrims (1.4%) were affected with CL before the intervention (pretest), five (0.3%) persons were found to have CL after taking control measures. The Chi-square test did not indicate any significant difference in the relative frequency of CL (P = 0.731). The only scientific method for preventing and controlling zoonotic CL (ZCL) is a combination of the control methods (improving the environment and fighting off the disease districts and vectors) together with changing the vegetative cover of the region. Any measure for controlling this disease must be taken and programmed in accordance with the relevant experts' views, in coordination with the participation of other organizations and the society.

Bayesian network model of crowd emotion and negative behavior

Science.gov (United States)

Ramli, Nurulhuda; Ghani, Noraida Abdul; Hatta, Zulkarnain Ahmad; Hashim, Intan Hashimah Mohd; Sulong, Jasni; Mahudin, Nor Diana Mohd; Rahman, Shukran Abd; Saad, Zarina Mat

2014-12-01

The effects of overcrowding have become a major concern for event organizers. One aspect of this concern has been the idea that overcrowding can enhance the occurrence of serious incidents during events. As one of the largest Muslim religious gathering attended by pilgrims from all over the world, Hajj has become extremely overcrowded with many incidents being reported. The purpose of this study is to analyze the nature of human emotion and negative behavior resulting from overcrowding during Hajj events from data gathered in Malaysian Hajj Experience Survey in 2013. The sample comprised of 147 Malaysian pilgrims (70 males and 77 females). Utilizing a probabilistic model called Bayesian network, this paper models the dependence structure between different emotions and negative behaviors of pilgrims in the crowd. The model included the following variables of emotion: negative, negative comfortable, positive, positive comfortable and positive spiritual and variables of negative behaviors; aggressive and hazardous acts. The study demonstrated that emotions of negative, negative comfortable, positive spiritual and positive emotion have a direct influence on aggressive behavior whereas emotion of negative comfortable, positive spiritual and positive have a direct influence on hazardous acts behavior. The sensitivity analysis showed that a low level of negative and negative comfortable emotions leads to a lower level of aggressive and hazardous behavior. Findings of the study can be further improved to identify the exact cause and risk factors of crowd-related incidents in preventing crowd disasters during the mass gathering events.

Motor systems energy efficiency supply curves: A methodology for assessing the energy efficiency potential of industrial motor systems

International Nuclear Information System (INIS)

McKane, Aimee; Hasanbeigi, Ali

2011-01-01

Motor-driven equipment accounts for approximately 60% of manufacturing final electricity use worldwide. A major barrier to effective policymaking, and to more global acceptance of the energy efficiency potential in industrial motor systems, is the lack of a transparent methodology for quantifying the magnitude and cost-effectiveness of these energy savings. This paper presents the results of groundbreaking analyses conducted for five countries and one region to begin to address this barrier. Using a combination of expert opinion and available data from the United States, Canada, the European Union, Thailand, Vietnam, and Brazil, bottom-up energy efficiency supply curve models were constructed to estimate the cost-effective electricity efficiency potentials and CO 2 emission reduction for three types of motor systems (compressed air, pumping, and fan) in industry for the selected countries/region. Based on these analyses, the share of cost-effective electricity saving potential of these systems as compared to the total motor system energy use in the base year varies between 27% and 49% for pumping, 21% and 47% for compressed air, and 14% and 46% for fan systems. The total technical saving potential varies between 43% and 57% for pumping, 29% and 56% for compressed air, and 27% and 46% for fan systems. - Highlights: → Development of conservation supply curves for the industrial motor systems. → An innovative approach combining available aggregate country-level data with expert opinion. → Results show both cost-effective and technical potential for energy saving and their costs. → Policy implication of the results are briefly discussed.

SMALL OFFICE BUILDING ENTERPRISE: CRITERIA FOR EFFICIENCY AND COMPETITIVENESS

Directory of Open Access Journals (Sweden)

E. V. Folomeev

2011-01-01

Full Text Available Main efficiency and competitiveness assessment criteria applicable to small construction organizations operating under market conditions are minimization of reduced costs and maximal conformity with quality requirements to building and structures under construction. Small enterprisefinance organization principles are as follows: independence, self-financing, responsibility for the company’s financial and economic activity results and control thereof. A method of investment option efficiency assessment with due account of construction project specifics is proposed. It is recommended to develop and use strategic cards to provide for balanced enterprise development.

Development of Bottom-up Representation of Industrial Energy Efficiency Technologies in Integrated Assessment Models for the Iron and Steel Sector

Energy Technology Data Exchange (ETDEWEB)

Xu, T.T.; Sathaye, J.; Galitsky, C.

2010-09-30

Adoption of efficient end-use technologies is one of the key measures for reducing greenhouse gas (GHG) emissions. With the working of energy programs and policies on carbon regulation, how to effectively analyze and manage the costs associated with GHG reductions become extremely important for the industry and policy makers around the world. Energy-climate (EC) models are often used for analyzing the costs of reducing GHG emissions (e.g., carbon emission) for various emission-reduction measures, because an accurate estimation of these costs is critical for identifying and choosing optimal emission reduction measures, and for developing related policy options to accelerate market adoption and technology implementation. However, accuracies of assessing of GHG-emission reduction costs by taking into account the adoption of energy efficiency technologies will depend on how well these end-use technologies are represented in integrated assessment models (IAM) and other energy-climate models. In this report, we first conduct brief overview on different representations of end-use technologies (mitigation measures) in various energy-climate models, followed by problem statements, and a description of the basic concepts of quantifying the cost of conserved energy including integrating non-regrets options. A non-regrets option is defined as a GHG reduction option that is cost effective, without considering their additional benefits related to reducing GHG emissions. Based upon these, we develop information on costs of mitigation measures and technological change. These serve as the basis for collating the data on energy savings and costs for their future use in integrated assessment models. In addition to descriptions of the iron and steel making processes, and the mitigation measures identified in this study, the report includes tabulated databases on costs of measure implementation, energy savings, carbon-emission reduction, and lifetimes. The cost curve data on mitigation

Ziarah Perspektif Kajian Budaya (Studi Pada Situs Makam Mbah Priuk Jakarta Utara

Directory of Open Access Journals (Sweden)

Syahdan Syahdan

2017-06-01

Full Text Available Pilgrimage in this study tries to investigate from the perspective of cultural study, they are form (significant, function (application, interaction and meaning (signifie. This study aimed to obtain information about the process of pilgrimage ritual at the tomb of Mbah Priuk, also trying to comprehend the function and meaning contained in the pilgrimage ritual activities conducted at the tomb of Mbah Priuk. The results obtained in this study show that all the informants who researcher encountered have similar view about Mbah Priuk. The people’s motive who do pilgrimage, in general, is to pray and make Mbah Priuk as a mediator. The unique ritual done by pilgrims is throwing banknotes or coins into a small pond. In this ritual many pilgrims choose the pool eventhough there is already a place to put the money provided by the cemetary organizer. 

Consensus recommendation for meningococcal disease prevention for Hajj and Umra pilgrimage/travel medicine.

Science.gov (United States)

Shibl, A; Tufenkeji, H; Khalil, M; Memish, Z

2013-04-01

The Islamic Hajj to Makkah (Mecca) has been associated with outbreaks of invasive meningococcal disease and the global spread of Neisseria meningitidis serogroup W-135. For Hajj pilgrims the quadrivalent vaccination against serogroups A, C, W-135 and Y is a mandatory requirement. Novel conjugate vaccines may provide benefits for the community by reduction of carriage. With the introduction of the new generation of quadrivalent meningococcal conjugate vaccines (Menveo, Menactra, and others pending license) and their recent implementation in Saudi Arabia, experts from 11 countries in the Middle East region met at a Meningococcal Leadership Forum (MLF), in Dubai in May 2010 to exchange opinions on meningococcal disease and prevention strategies. These experts discussed the importance of introducing conjugate vaccines for pilgrims and travellers, and elaborated a consensus recommendation to support healthcare professionals and decision-makers.

Assessing efficiency and economic viability of rainwater harvesting systems for meeting non-potable water demands in four climatic zones of China

Science.gov (United States)

Zhang, S.; Jing, X.

2017-12-01

Rainwater harvesting is now increasingly used to manage urban flood and alleviate water scarcity crisis. In this study, a computational tool based on water balance equation is developed to assess stormwater capture and water saving efficiency and economic viability of rainwater harvesting systems (RHS) in eight cities across four climatic zones of China. It requires daily rainfall, contributing area, runoff losses, first flush volume, storage capacity, daily water demand and economic parameters as inputs. Three non-potable water demand scenarios (i.e., toilet flushing, lawn irrigation, and combination of them) are considered. The water demand for lawn irrigation is estimated using the Cropwat 8.0 and Climwat 2.0. Results indicate that higher water saving efficiency and water supply time reliability can be achieved for RHS with larger storage capacities, for lower water demand scenarios and located in more humid regions, while higher stormwater capture efficiency is associated with larger storage capacity, higher water demand scenarios and less rainfall. For instance, a 40 m3 RHS in Shanghai (humid climate) for lawn irrigation can capture 17% of stormwater, while its water saving efficiency and time reliability can reach 96 % and 98%, respectively. The water saving efficiency and time reliability of a 20 m3 RHS in Xining (semi-arid climate) for toilet flushing are 19% and 16%, respectively, but it can capture 63% of stormwater. With the current values of economic parameters, economic viability of RHS can be achieved in humid and semi-humid regions for reasonably designed RHS; however, it is not financially viable to install RHS in arid regions as the benefit-cost ratio is much smaller than 1.0.

Regional and global exergy and energy efficiencies

Energy Technology Data Exchange (ETDEWEB)

Nakicenovic, N; Kurz, R [International Inst. for Applied Systems Analysis, Laxenburg (Austria). Environmentally Compatible Energy Strategies (Ecuador) Project; Gilli, P V [Graz Univ. of Technology (Austria)

1996-03-01

We present estimates of global energy efficiency by applying second-law (exergy) analysis to regional and global energy balances. We use a uniform analysis of national and regional energy balances and aggregate these balances first for three main economic regions and subsequently into world totals. The procedure involves assessment of energy and exergy efficiencies at each step of energy conversion, from primary exergy to final and useful exergy. Ideally, the analysis should be extended to include actual delivered energy services; unfortunately, data are scarce and only rough estimates can be given for this last stage of energy conversion. The overall result is that the current global primary to useful exergy efficiency is about one-tenth of the theoretical maximum and the service efficiency is even lower. (Author)

THEORETICAL APPROACHES TO ASSESS EFFICIENCY OF THE TRANSFORMATION OF THE KEY BUSINESS PROCESSES IN THE PUBLISHING AND PRINTING ACTIVITIES IN THE REGION

Directory of Open Access Journals (Sweden)

Volodymyr Bazyliuk

2016-11-01

Full Text Available The purpose of the paper is the theoretical study and the analysis of the basic methodological approaches to assess the effectiveness of the transformation of key business processes in the PPA (publishing and printing activity in the region in order to choose the best option. Methodology. The overview of the main assessment methods of the effectiveness of business processes: EVA (Economic value added; ABC (Activity-based costing; Tableau of bord and BSC (Balanced Scorecard is provided. In order to ensure the formalization of the intergrated assessment of the effectiveness of the business process in the publishing and printing activities in the region it is suggested to apply to the methodological apparatus of the fuzzy sets. Statistical analysis, comparison and synthesis are necessary to study the efficiency of the transformation of the key business processes in the PPA in the region. Results. The review and analysis of the most common methods for evaluating the effectiveness of the transformation of key business processes were conducted; the basic advantages and disadvantages of each of the proposed methods in the light of PPA were studied. It was proved that a single business process involves the use of a scorecard that is specific and peculiar for it only whereas completeness of its analysis depends on the kind of the business process: basic, developmental, managing or providing one. The approach to the formalization of the integrated assememnt of the effectiveness of business process in PPA in the region, based on the theory of fuzzy sets was formulated. Practical significance. The mathematical formulation of the problem, an integrated assessment of the efficiency of the business process for each of the possible options for its implementation was developed, and the algorithm of assessing the effectiveness of the business process in the PPA in the region was generated by the apparatus of fuzzy sets. Value/originality. Implementing the

[A motivational approach of cognitive efficiency in nursing home residents].

Science.gov (United States)

Clément, Evelyne; Vivicorsi, Bruno; Altintas, Emin; Guerrien, Alain

2014-06-01

Despite a widespread concern with self-determined motivation (behavior is engaged in "out of pleasure" or "out of choice and valued as being important") and psychological adjustment in later life (well-being, satisfaction in life, meaning of life, or self-esteem), very little is known about the existence and nature of the links between self-determined motivation and cognitive efficiency. The aim of the present study was to investigate theses links in nursing home residents in the framework of the Self-determination theory (SDT) (Deci & Ryan, 2002), in which motivational profile of a person is determined by the combination of different kinds of motivation. We hypothesized that self-determined motivation would lead to higher cognitive efficiency. Participants. 39 (32 women and 7 men) elderly nursing home residents (m= 83.6 ± 9.3 year old) without any neurological or psychiatric disorders (DSM IV) or depression or anxiety (Hamilton depression rating scales) were included in the study. Methods. Cognitive efficiency was evaluated by two brief neuropsychological tests, the Mini mental state examination (MMSE) and the Frontal assessment battery (FAB). The motivational profile was assessed by the Elderly motivation scale (Vallerand & 0'Connor, 1991) which includes four subscales assessing self- and non-self determined motivation to engage oneself in different domains of daily life activity. Results. The neuropsychological scores were positively and significantly correlated to self-determined extrinsic motivation (behavior is engaged in "out of choice" and valued as being important), and the global self-determination index (self-determined motivational profile) was the best predictor of the cognitive efficiency. Conclusion. The results support the SDT interest for a qualitative assessment of the motivation of the elderly people and suggest that a motivational approach of cognitive efficiency could help to interpret cognitive performances exhibited during neuropsychological

The dynamic efficiency of feed-in tariffs: The impact of different design elements

International Nuclear Information System (INIS)

Río, Pablo del

2012-01-01

Dynamic efficiency has received much less attention than the effectiveness and static efficiency criteria to assess policies to support electricity from renewable energy sources (RES-E). On the other hand, the literature on RES-E support shows that the choice of design elements within RES-E support instruments is at least as important to successfully promote RES-E as the choice of specific instruments. The aim of this paper is to build a theoretical framework for dynamic efficiency analysis and assess the dynamic efficiency properties of the different design elements of feed-in tariffs. It is shown that, in fact, several design elements can have a significant impact on the different dimensions of dynamic efficiency. Particularly relevant design elements in this context are technology-specific fixed-tariffs, floor prices, degression, reductions of support over time for existing plants, long duration of support and support falling on consumers. In addition, it is shown than some design elements would be more appropriate than others to activate specific dimensions. - Highlights: ► A theoretical framework for dynamic efficiency analysis is built. ► The dynamic efficiency properties of feed-in tariffs design elements are assessed. ► Several design elements have a significant impact on the different dimensions of dynamic efficiency.

Institutions, Behavior of Agents and Efficiency

Directory of Open Access Journals (Sweden)

Sukharev Oleg, S.

2016-03-01

Full Text Available We study the efficiency criterion, describing the behavior and choices of agents, the influence of moral norms on the model of behavior, as well as the criterion of efficiency as an institution to assess the behavior and development of the economic system. Curve proposed institutional compromise that allows to determine the possibility of changes in the welfare of interacting agents and their compliance with ethical standards when welfare increases due to violation or compliance with these standards. For the purposes of this demonstration of the influence of the model of chart-based dilemmas Holmes-Moriarty. Incentives in determining the agents behaviors play a key role in their formation due to the moral principles of behavior. However, in economics there are situations when moral principles are derived certain behaviors or interactions agents. Holmes and Moriarty there is an alternative interaction, which they can not take advantage of, and there is a full range of alternatives that actually programs the strategic outcomes of interactions that reflect the curves of "institutional compromise." Choosing an agent of moral standards as a potential model determines its behavior and, most importantly, interaction with other agents, adhering to certain moral principles. Assess the condition and the possibility of using a static criterion of Pareto efficiency for the analysis of situations where it is important to measure the economic efficiency. Showing institutional aspects that must be considered in the application or formulation of new performance criteria. It is proved that there is a connection microeconomic efficiency / inefficiency and parameters of behavior of agents that actualizes the need to impact on the behavior of agents incentives to solve the task of changing the structure.

Removal Efficiency and Risk Assessment of Polycyclic Aromatic Hydrocarbons in a Typical Municipal Wastewater Treatment Facility in Guangzhou, China

Directory of Open Access Journals (Sweden)

Zhineng Liu

2017-08-01

Full Text Available The loading and removal efficiency of 16 US EPA polycyclic aromatic hydrocarbons (PAHs were examined in an inverted A2/O wastewater treatment plant (WWTP located in an urban area in China. The total PAH concentrations were 554.3 to 723.2 ng/L in the influent and 189.6 to 262.7 ng/L in the effluent. The removal efficiencies of ∑PAHs in the dissolved phase ranged from 63 to 69%, with the highest observed in naphthalene (80% removal. Concentration and distribution of PAHs revealed that the higher molecular weight PAHs became more concentrated with treatment in both the dissolved phase and the dewatered sludge. The sharpest reduction was observed during the pretreatment and the biological phase. Noncarcinogenic risk, carcinogenic risk, and total health risk of PAHs found in the effluent and sewage sludge were also assessed. The effluent BaP toxic equivalent quantities (TEQBaP were above, or far above, standards in countries. The potential toxicities of PAHs in sewage effluent were approximately 10 to 15 times higher than the acceptable risk level in China. The health risk associated with the sewage sludge also exceeded international recommended levels and was mainly contributed from seven carcinogenic PAHs. Given that WWTP effluent is a major PAH contributor to surface water bodies in China and better reduction efficiencies are achievable, the present study highlights the possibility of utilizing WWTPs for restoring water quality in riverine and coastal regions heavily impacted by PAHs contamination.

Removal Efficiency and Risk Assessment of Polycyclic Aromatic Hydrocarbons in a Typical Municipal Wastewater Treatment Facility in Guangzhou, China.

Science.gov (United States)

Liu, Zhineng; Li, Qing; Wu, Qihang; Kuo, Dave T F; Chen, Shejun; Hu, Xiaodong; Deng, Mingjun; Zhang, Haozhi; Luo, Min

2017-08-01

The loading and removal efficiency of 16 US EPA polycyclic aromatic hydrocarbons (PAHs) were examined in an inverted A²/O wastewater treatment plant (WWTP) located in an urban area in China. The total PAH concentrations were 554.3 to 723.2 ng/L in the influent and 189.6 to 262.7 ng/L in the effluent. The removal efficiencies of ∑PAHs in the dissolved phase ranged from 63 to 69%, with the highest observed in naphthalene (80% removal). Concentration and distribution of PAHs revealed that the higher molecular weight PAHs became more concentrated with treatment in both the dissolved phase and the dewatered sludge. The sharpest reduction was observed during the pretreatment and the biological phase. Noncarcinogenic risk, carcinogenic risk, and total health risk of PAHs found in the effluent and sewage sludge were also assessed. The effluent BaP toxic equivalent quantities ( TEQ BaP ) were above, or far above, standards in countries. The potential toxicities of PAHs in sewage effluent were approximately 10 to 15 times higher than the acceptable risk level in China. The health risk associated with the sewage sludge also exceeded international recommended levels and was mainly contributed from seven carcinogenic PAHs. Given that WWTP effluent is a major PAH contributor to surface water bodies in China and better reduction efficiencies are achievable, the present study highlights the possibility of utilizing WWTPs for restoring water quality in riverine and coastal regions heavily impacted by PAHs contamination.

Cost-benefit assessment of energy efficiency investments: Accounting for future resources, savings and risks in the Australian residential sector

International Nuclear Information System (INIS)

Morrissey, J.; Meyrick, B.; Sivaraman, D.; Horne, R.E.; Berry, M.

2013-01-01

This article focuses on the impact of the discount rate on cost-benefit assessment of investment options for residential building efficiency. An integrated thermal modeling, life cycle costing approach is applied to an extensive sample of dominant house designs for Australian conditions. The relative significance of predicted thermal performance and the applied discount rate on the Present Value of energy savings from alternative investment scenarios is investigated. Costs and benefits are also evaluated at the economy-wide scale, including carbon pricing considerations, and for a test-case household faced with alternative investment options at the point of construction. The influence of the applied discount rate on produced cost-benefit calculations is investigated, as is the interaction between critical cost-benefit input parameters. Findings support that the discounting framework is the primary driver of difference in estimates about costs and benefits of higher standards of efficiency in the residential sector. Results demonstrate that agreement on a low discount rate based on sustainability principals would prioritise those projects with significant environmental benefits. - Highlights: ► High thermal efficiency is a key strategy to limit energy use in buildings. ► Integrated thermal modeling—life-cycle costing methods are applied to dominant house designs. ► The discounting framework is the primary driver of difference in observed costs. ► The selection of optimal performance investment options depends on the discount rate. ► Application of a discount rate of 3.5% or lower favours energy saving projects

Industrial energy efficiency with CO2 emissions in China: A nonparametric analysis

International Nuclear Information System (INIS)

Wu, F.; Fan, L.W.; Zhou, P.; Zhou, D.Q.

2012-01-01

Global awareness on energy security and climate change has created much interest in assessing economy-wide energy efficiency performance. A number of previous studies have contributed to evaluate energy efficiency performance using different analytical techniques among which data envelopment analysis (DEA) has recently received increasing attention. Most of DEA-related energy efficiency studies do not consider undesirable outputs such as CO 2 emissions in their modeling framework, which may lead to biased energy efficiency values. Within a joint production framework of desirable and undesirable outputs, in this paper we construct both static and dynamic energy efficiency performance indexes for measuring industrial energy efficiency performance by using several environmental DEA models with CO 2 emissions. The dynamic energy efficiency performance indexes have further been decomposed into two contributing components. We finally apply the indexes proposed to assess the industrial energy efficiency performance of different provinces in China over time. Our empirical study shows that the energy efficiency improvement in China's industrial sector was mainly driven by technological improvement. - Highlights: ► China's industrial energy efficiency is evaluated by DEA models with CO 2 emissions. ► China's industrial energy efficiency improved by 5.6% annually since 1997. ► Industrial energy efficiency improvement in China was mainly driven by technological improvement.

Urban eco-efficiency and system dynamics modelling

Energy Technology Data Exchange (ETDEWEB)

Hradil, P., Email: petr.hradil@vtt.fi

2012-06-15

Assessment of urban development is generally based on static models of economic, social or environmental impacts. More advanced dynamic models have been used mostly for prediction of population and employment changes as well as for other macro-economic issues. This feasibility study was arranged to test the potential of system dynamic modelling in assessing eco-efficiency changes during urban development. (orig.)

Measuring and explaining eco-efficiencies of wastewater treatment plants in China: An uncertainty analysis perspective.

Science.gov (United States)

Dong, Xin; Zhang, Xinyi; Zeng, Siyu

2017-04-01

In the context of sustainable development, there has been an increasing requirement for an eco-efficiency assessment of wastewater treatment plants (WWTPs). Data envelopment analysis (DEA), a technique that is widely applied for relative efficiency assessment, is used in combination with the tolerances approach to handle WWTPs' multiple inputs and outputs as well as their uncertainty. The economic cost, energy consumption, contaminant removal, and global warming effect during the treatment processes are integrated to interpret the eco-efficiency of WWTPs. A total of 736 sample plants from across China are assessed, and large sensitivities to variations in inputs and outputs are observed for most samples, with only three WWTPs identified as being stably efficient. Size of plant, overcapacity, climate type, and influent characteristics are proven to have a significant influence on both the mean efficiency and performance sensitivity of WWTPs, while no clear relationships were found between eco-efficiency and technology under the framework of uncertainty analysis. The incorporation of uncertainty quantification and environmental impact consideration has improved the liability and applicability of the assessment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Energy efficiency in the British housing stock: Energy demand and the Homes Energy Efficiency Database

International Nuclear Information System (INIS)

Hamilton, Ian G.; Steadman, Philip J.; Bruhns, Harry; Summerfield, Alex J.; Lowe, Robert

2013-01-01

The UK Government has unveiled an ambitious retrofit programme that seeks significant improvement to the energy efficiency of the housing stock. High quality data on the energy efficiency of buildings and their related energy demand is critical to supporting and targeting investment in energy efficiency. Using existing home improvement programmes over the past 15 years, the UK Government has brought together data on energy efficiency retrofits in approximately 13 million homes into the Homes Energy Efficiency Database (HEED), along with annual metered gas and electricity use for the period of 2004–2007. This paper describes the HEED sample and assesses its representativeness in terms of dwelling characteristics, the energy demand of different energy performance levels using linked gas and electricity meter data, along with an analysis of the impact retrofit measures has on energy demand. Energy savings are shown to be associated with the installation of loft and cavity insulation, and glazing and boiler replacement. The analysis illustrates this source of ‘in-action’ data can be used to provide empirical estimates of impacts of energy efficiency retrofit on energy demand and provides a source of empirical data from which to support the development of national housing energy efficiency retrofit policies. - Highlights: • The energy efficiency level for 50% of the British housing stock is described. • Energy demand is influenced by size and age and energy performance. • Housing retrofits (e.g. cavity insulation, glazing and boiler replacements) save energy. • Historic differences in energy performance show persistent long-term energy savings

Electro-Optical Design for Efficient Visual Communication

Science.gov (United States)

Huck, Friedrich O.; Fales, Carl L.; Jobson, Daniel J.; Rahman, Zia-Ur

1995-01-01

Visual communication, in the form of telephotography and television, for example, can be regarded as efficient only if the amount of information that it conveys about the scene to the observer approaches the maximum possible and the associated cost approaches the minimum possible. Elsewhere we have addressed the problem of assessing the end to end performance of visual communication systems in terms of their efficiency in this sense by integrating the critical limiting factors that constrain image gathering into classical communications theory. We use this approach to assess the electro-optical design of image gathering devices as a function of the f number and apodization of the objective lens and the aperture size and sampling geometry of the phot-detection mechanism. Results show that an image gathering device that is designed to optimize information capacity performs similarly to the human eye. For both, the performance approaches the maximum possible, in terms of the efficiency with which the acquired information can be transmitted as decorrelated data, and the fidelity, sharpness, and clearity with which fine detail can be restored.

Electro-optical design for efficient visual communication

Science.gov (United States)

Huck, Friedrich O.; Fales, Carl L.; Jobson, Daniel J.; Rahman, Zia-ur

1995-03-01

Visual communication, in the form of telephotography and television, for example, can be regarded as efficient only if the amount of information that it conveys about the scene to the observer approaches the maximum possible and the associated cost approaches the minimum possible. Elsewhere we have addressed the problem of assessing the end-to-end performance of visual communication systems in terms of their efficiency in this sense by integrating the critical limiting factors that constrain image gathering into classical communication theory. We use this approach to assess the electro-optical design of image-gathering devices as a function of the f number and apodization of the objective lens and the aperture size and sampling geometry of the photodetection mechanism. Results show that an image-gathering device that is designed to optimize information capacity performs similarly to the human eye. For both, the performance approaches the maximum possible, in terms of the efficiency with which the acquired information can be transmitted as decorrelated data, and the fidelity, sharpness, and clarity with which fine detail can be restored.

Efficiency Assessment in the Automobile Insurance Sector

OpenAIRE

Mar Molinero, Cecilio; Segovia, Maria-Manuela; Contreras, Ignacio

2009-01-01

Insurance companies have to take risk and cost into account when pricing car insurance policies in order to design new products to cover the risk of private use of cars. In this paper we use data from 80,000 car insurance policies in\\ud order to assess, once risk and cost have been taken into account, the policies that generate the highest returns for the company. After different profiles of clients are identified, including among the characteristics the regional\\ud location of the clients, w...

Assessing the efficiency of different CSO positions based on network graph characteristics.

Science.gov (United States)

Sitzenfrei, R; Urich, C; Möderl, M; Rauch, W

2013-01-01

The technical design of urban drainage systems comprises two major aspects: first, the spatial layout of the sewer system and second, the pipe-sizing process. Usually, engineers determine the spatial layout of the sewer network manually, taking into account physical features and future planning scenarios. Before the pipe-sizing process starts, it is important to determine locations of possible weirs and combined sewer overflows (CSOs) based on, e.g. distance to receiving water bodies or to a wastewater treatment plant and available space for storage units. However, positions of CSOs are also determined by topological characteristics of the sewer networks. In order to better understand the impact of placement choices for CSOs and storage units in new systems, this work aims to determine case unspecific, general rules. Therefore, based on numerous, stochastically generated virtual alpine sewer systems of different sizes it is investigated how choices for placement of CSOs and storage units have an impact on the pipe-sizing process (hence, also on investment costs) and on technical performance (CSO efficiency and flooding). To describe the impact of the topological positions of these elements in the sewer networks, graph characteristics are used. With an evaluation of 2,000 different alpine combined sewer systems, it was found that, as expected, with CSOs at more downstream positions in the network, greater construction costs and better performance regarding CSO efficiency result. At a specific point (i.e. topological network position), no significant difference (further increase) in construction costs can be identified. Contrarily, the flooding efficiency increases with more upstream positions of the CSOs. Therefore, CSO and flooding efficiency are in a trade-off conflict and a compromise is required.

Screening and evaluation of Second Half 1980 licensee event reports

International Nuclear Information System (INIS)

Waage, J.M.

1981-09-01

During the second part of 1980, two individual plant events occurred: Indian Point-2 (containment flooding) and Pilgrim-1 (uncontrolled blowdown). Significant event reports and update on generic problem areas and major equipment problem areas are included in this report

The Pride and the Passion: Introduction to Black History.

Science.gov (United States)

Berry, Goodman

1983-01-01

The first Blacks in the Americas arrived before the Pilgrims landed at Plymouth Rock. Blacks have contributed to the development of the United States in the fields of government, education, science, music, entertainment (comedy and drama), literature, art, and athletics. (AOS)

Assessment of impact of borehole heat exchanger design on heat extraction/rejection efficiency

Directory of Open Access Journals (Sweden)

Gornov V.F.

2016-01-01

Full Text Available The article considers the impact of design of borehole heat exchanger (BHE as one of the main elements of a geothermal heat pump system on its efficiency in the ground heat extraction/rejection. Four BHE modifications are considered: coaxial with metal and polyethylene outside tube as well as single and double U-shaped structures of polyethylene tubes. Numerical modeling resulted to data on the efficiency of these BHE modifications for rejection heat into ground (heat pump system in cooling mode, and ground heat extraction (heat pump system in heating mode. Numerical values were obtained and BHEs were ranked according to their efficiency in both operation modes. Besides, additional calculations were made for the most common modification - double U-shaped design - in the ground heat extraction mode for various tube sizes with various wall thicknesses.

The importance of learning when supporting emergent technologies for energy efficiency-A case study on policy intervention for learning for the development of energy efficient windows in Sweden

International Nuclear Information System (INIS)

Kiss, Bernadett; Neij, Lena

2011-01-01

The role of policy instruments to promote the development and diffusion of energy efficient technologies has been repeatedly accentuated in the context of climate change and sustainable development. To better understand the impact of policy instruments and to provide insights into technology change, assessments of various kinds are needed. This study analyzes the introduction and development of energy efficient windows in Sweden and the policy incentives applied to support this process. The study focuses on the assessment of technology and market development of energy efficient windows in Sweden; and by applying the concept of learning, it assesses how conditions for learning-by-searching, learning-by-doing, learning-by-using and learning-by-interacting have been supported by different policies. The results show successful progress in technology development and an improvement in best available technology of Swedish windows from 1.8 W/m 2 K in the 1970s to 0.7 W/m 2 K in 2010; in the same time period the market share of energy efficient windows increased from 20% in 1970 (average U-value of 2.0 W/m 2 K) to 80-85% in 2010 (average U-value of 1.3-1.2 W/m 2 K). The assessment shows that various policy instruments have facilitated all four learning processes resulting in the acknowledged slow but successful development of energy efficient windows. - Highlights: → Policy instruments for learning and technology change are assessed. → The development and diffusion of energy efficient windows (EEWs) in Sweden is taken as showcase. → Learning has been supported by various policies resulting in successful development of EEWs. → The thermal performance of EEWs improved with 2/3 and their market share increased by 3/5 in 40 years. → Main policies for learning are RD and D, technology procurement, testing and voluntary initiatives.

Eco-efficiency of grinding processes and systems

CERN Document Server

Winter, Marius

2016-01-01

This research monograph aims at presenting an integrated assessment approach to describe, model, evaluate and improve the eco-efficiency of existing and new grinding processes and systems. Various combinations of grinding process parameters and system configurations can be evaluated based on the eco-efficiency. The book presents the novel concept of empirical and physical modeling of technological, economic and environmental impact indicators. This includes the integrated evaluation of different grinding process and system scenarios. The book is a valuable read for research experts and practitioners in the field of eco-efficiency of manufacturing processes but the book may also be beneficial for graduate students.

Energy efficiency of selected OECD countries: A slacks based model with undesirable outputs

International Nuclear Information System (INIS)

Apergis, Nicholas; Aye, Goodness C.; Barros, Carlos Pestana; Gupta, Rangan; Wanke, Peter

2015-01-01

This paper presents an efficiency assessment of selected OECD countries using a Slacks Based Model with undesirable or bad outputs (SBM-Undesirable). In this research, SBM-Undesirable is used first in a two-stage approach to assess the relative efficiency of OECD countries using the most frequent indicators adopted by the literature on energy efficiency. Besides, in the second stage, GLMM–MCMC methods are combined with SBM-Undesirable results as part of an attempt to produce a model for energy performance with effective predictive ability. The results reveal different impacts of contextual variables, such as economic blocks and capital–labor ratio, on energy efficiency levels. - Highlights: • We analyze the energy efficiency of selected OECD countries. • SBM-Undesirable and MCMC–GLMM are combined for this purpose. • Find that efficiency levels are high but declining over time. • Analysis with contextual variables shows varying efficiency levels across groups. • Capital-intensive countries are more energy efficient than labor-intensive countries.

Emerging energy-efficient industrial technologies

Energy Technology Data Exchange (ETDEWEB)

Martin, N.; Worrell, E.; Ruth, M.; Price, L.; Elliott, R.N.; Shipley, A.M.; Thorne, J.

2000-10-01

U.S. industry consumes approximately 37 percent of the nation's energy to produce 24 percent of the nation's GDP. Increasingly, industry is confronted with the challenge of moving toward a cleaner, more sustainable path of production and consumption, while increasing global competitiveness. Technology will be essential for meeting these challenges. At some point, businesses are faced with investment in new capital stock. At this decision point, new and emerging technologies compete for capital investment alongside more established or mature technologies. Understanding the dynamics of the decision-making process is important to perceive what drives technology change and the overall effect on industrial energy use. The assessment of emerging energy-efficient industrial technologies can be useful for: (1) identifying R&D projects; (2) identifying potential technologies for market transformation activities; (3) providing common information on technologies to a broad audience of policy-makers; and (4) offering new insights into technology development and energy efficiency potentials. With the support of PG&E Co., NYSERDA, DOE, EPA, NEEA, and the Iowa Energy Center, staff from LBNL and ACEEE produced this assessment of emerging energy-efficient industrial technologies. The goal was to collect information on a broad array of potentially significant emerging energy-efficient industrial technologies and carefully characterize a sub-group of approximately 50 key technologies. Our use of the term ''emerging'' denotes technologies that are both pre-commercial but near commercialization, and technologies that have already entered the market but have less than 5 percent of current market share. We also have chosen technologies that are energy-efficient (i.e., use less energy than existing technologies and practices to produce the same product), and may have additional ''non-energy benefits.'' These benefits are as important (if

Stepwise magnetic-geochemical approach for efficient assessment of heavy metal polluted sites

Science.gov (United States)

Appel, E.; Rösler, W.; Ojha, G.

2012-04-01

Previous studies have shown that magnetometry can outline the distribution of fly ash deposition in the surroundings of coal-burning power plants and steel industries. Especially the easy-to-measure magnetic susceptibility (MS) is capable to act as a proxy for heavy metal (HM) pollution caused by such kind of point source pollution. Here we present a demonstration project around the coal-burning power plant complex "Schwarze Pumpe" in eastern Germany. Before reunification of West and East Germany huge amounts of HM pollutants were emitted from the "Schwarze Pumpe" into the environment by both fly ash emission and dumped clinker. The project has been conducted as part of the TASK Centre of Competence which aims at bringing new innovative techniques closer to the market. Our project combines in situ and laboratory MS measurements and HM analyses in order to demonstrate the efficiency of a stepwise approach for site assessment of HM pollution around point sources of fly-ash emission and deposition into soil. The following scenario is played through: We assume that the "true" spatial distribution of HM pollution (given by the pollution load index PLI comprising Fe, Zn, Pb, and Cu) is represented by our entire set of 85 measured samples (XRF analyses) from forest sites around the "Schwarze Pumpe". Surface MS data (collected with a Bartington MS2D) and in situ vertical MS sections (logged by an SM400 instrument) are used to determine a qualitative overview of potentially higher and lower polluted areas. A suite of spatial HM distribution maps obtained by random selections of 30 out of the 85 analysed sites is compared to the HM map obtained from a targeted 30-sites-selection based on pre-information from the MS results. The PLI distribution map obtained from the targeted 30-sites-selection shows all essential details of the "true" pollution map, while the different random 30-sites-selections miss important features. This comparison shows that, for the same cost

A Network DEA Model with Super Efficiency and Undesirable Outputs: An Application to Bank Efficiency in China

Directory of Open Access Journals (Sweden)

Jianhuan Huang

2014-01-01

Full Text Available There are two typical subprocesses in bank production—deposit generation and loan generation. Aiming to open the black box of input-output production of banks and provide comprehensive and accurate assessment on the efficiency of each stage, this paper proposes a two-stage network model with bad outputs and supper efficiency (US-NSBM. Empirical comparisons show that the US-NSBM may be promising and practical for taking the nonperforming loans into account and being able to rank all samples. Applying it to measure the efficiency of Chinese commercial banks from 2008 to 2012, this paper explores the characteristics of overall and divisional efficiency, as well as the determinants of them. Some interesting results are discovered. The polarization of efficiency occurs in the bank level and deposit generation, yet does not in the loan generation. Five hypotheses work as expected in the bank level, but not all of them are supported in the stage level. Our results extend and complement some earlier empirical publications in the bank level.

Scenarios of energy demand and efficiency potential for Bulgaria

Energy Technology Data Exchange (ETDEWEB)

Tzvetanov, P.; Ruicheva, M.; Denisiev, M.

1996-12-31

The paper presents aggregated results on macroeconomic and final energy demand scenarios developed within the Bulgarian Country Study on Greenhouse Gas Emissions Mitigation, supported by US Country Studies Program. The studies in this area cover 5 main stages: (1) {open_quotes}Baseline{close_quotes} and {open_quotes}Energy Efficiency{close_quotes} socioeconomic and energy policy philosophy; (2) Modeling of macroeconomic and sectoral development till 2020; (3) Expert assessments on the technological options for energy efficiency increase and GHG mitigation in the Production, Transport and Households and Services Sectors; (4) Bottom-up modeling of final energy demand; and (5) Sectoral and overall energy efficiency potential and policy. Within the Bulgarian Country Study, the presented results have served as a basis for the final integration stage {open_quotes}Assessment of the Mitigation Policy and Measures in the Energy System of Bulgaria{close_quotes}.

Energy efficiency assessment by life cycle simulation of cassava-based fuel ethanol for automotive use in Chinese Guangxi context

International Nuclear Information System (INIS)

Yu Suiran; Tao Jing

2009-01-01

Interest has been renewed in bio-ethanol products for their contributions in moderating oil crises. So far, most research on bio-ethanol in China is based on pilot-level experimental studies. But this work only discloses information regarding material balances and reached yields without any further energy analysis. This paper aims to assess the energy efficiency of the cassava-based fuel ethanol (KFE) product from southwest China. For the purpose of a life cycle study of the KFE product as replacement transportation fuel, the study chose a 'vehicle fueled by cassava-based E10 (a blend of 10% ethanol and 90% gasoline by volume)' as the subject and accordingly defined the scope of this study. Then, the life cycle model of the KFE product concerning energetically relevant in- and outputs was built. Due to variations in data collected, as well as some estimates and assumptions used in this study, the Monte Carlo method was introduced to develop the statistical dispersion of calculated outputs of the assessing model. Assessment results show that, within the boundary of this study, KFE has a positive net energy value, with an energy ratio of around 0.70 MJ/MJ, which means 7 MJ into the processing for each MJ of KFE output

Efficiency of working memory: Theoretical concept and practical application

Directory of Open Access Journals (Sweden)

Lalović Dejan

2008-01-01

Full Text Available Efficiency of working memory is the concept which connects psychology of memory with different fields of cognitive, differential and applied psychology. In this paper, the history of interest for the assessment of the capacity of short-term memory is presented in brief, as well as the different methods used nowadays to assess the individual differences in the efficiency of working memory. What follows is the consideration of studies that indicate the existence of significant links between the efficiency of working memory and general intelligence, the ability of reasoning, personality variables, as well as some socio-psychological phenomena. Special emphasis is placed on the links between the efficiency of working memory and certain aspects of pedagogical practice: acquiring the skill of reading, learning arithmetic and shedding light on the cause of general failure in learning at school. What is also provided are the suggestions that, in the light of knowledge about the development and limitations of working memory at school age, can be useful for teaching practice.

From the Roman and then Longobard via Cassiola to the Piccola Cassia Tourist Project

Directory of Open Access Journals (Sweden)

Paola Foschi

2017-12-01

Full Text Available A coordinated set of initiatives of cultural value also useful for the acquaintance and tourism development of the territory must have as solid basis the study of the ancient testimonies of the path of travelers and pilgrims. Cassiola road was a Roman road, continuing north of Cassia road, disused during the occupation of the Longobards of West Emilia, and reopened by the longobard king Astolfo in the middle of the eighth century. Today the different stretches of Cassiola or Piccola Cassia road are still accessible on foot, on horseback, by bicycle, and touch places of high historical, architectural, artistic and cultural value. The study of many other medieval roads deriving from Roman ones has verified the persistence of the use of the road name itself (such as Fiamenga da Flaminia or Cassiola da Cassia or the use in medieval documents of the term strata, which always indicates a road of importance not only local but at least regional or trans-regional. Via Cassiola can be found in medieval documents from this name, in the vulgar Latin transformed into Cassola, or in the historical cartography of Modern age with the name of Cassola or Cassoletta. Its path to the plain between Modena and Bologna covered important Benedictine abbeys rich in relics, such as S. Silvestro di Nonantola and S. Maria in Strada, and medieval hospitals for pilgrims, such as S. Bartholomew of Spilamberto. On the hills, the road touched the abbey of St. Lucia of Roffeno and wandered the Apennine to the passage of the Arcane Cross, where a great cross was driving the passengers. On the way to the pass, pilgrims could stay at the church of S. Colombano in Fanano, while in the valley of the Ospitale torrent one could find refuge in the hospice of S. Giacomo of Val di Lamola, both still existing. In Tuscany, the road allowed to arrive in Pistoia, the end of the Roman Cassia road, where pilgrims could adore the relics of saint James in the cathedral, or reach the Garfagnana

Assessment and Decomposition of Total Factor Energy Efficiency: An Evidence Based on Energy Shadow Price in China

Directory of Open Access Journals (Sweden)

Peihao Lai

2016-04-01

Full Text Available By adopting an energy-input based directional distance function, we calculated the shadow price of four types of energy (i.e., coal, oil, gas and electricity among 30 areas in China from 1998 to 2012. Moreover, a macro-energy efficiency index in China was estimated and divided into intra-provincial technical efficiency, allocation efficiency of energy input structure and inter-provincial energy allocation efficiency. It shows that total energy efficiency has decreased in recent years, where intra-provincial energy technical efficiency drops markedly and extensive mode of energy consumption rises. However, energy structure and allocation improves slowly. Meanwhile, lacking an integrated energy market leads to the loss of energy efficiency. Further improvement of market allocation and structure adjustment play a pivotal role in the increase of energy efficiency.

In vitro assessment of cytotoxicity and labeling efficiency of {sup 99m}Tc-HMPAO with stromal vascular fraction of adipose tissue

Energy Technology Data Exchange (ETDEWEB)

Verma, V. K.; Beevi, S. S. [Department of Transplant Biology, Immunology and Stem Cell Lab, Global Hospitals, Hyderabad (India); Tabassum, A.; Kumaresan, K. [KK Nuclear Scans, Raj Bhavan Road, Somajiguda, Hyderabad (India); Kamaraju, R. S. [Department of Transplant Biology, Immunology and Stem Cell Lab, Global Hospitals, Hyderabad (India); Arbab, A. S. [Cancer Centre, GA Regents University, Augusta, GA (United States); Chelluri, L.K., E-mail: lkiran@globalhospitalsindia.com [Department of Transplant Biology, Immunology and Stem Cell Lab, Global Hospitals, Hyderabad (India)

2014-10-15

Introduction: Noninvasive radionuclide imaging of cells using technetium99m-hexamethylpropyleneamine oxime ({sup 99m}Tc-HMPAO) is a potential diagnostic tool for several applications. Herein we aimed to evaluate the labeling efficiency and cellular toxicity of {sup 99m}Tc-HMPAO with Stromal Vascular Fraction (SVF) of adipose tissue to develop a process tool for theranostic purposes, in particular imaging cardiac stem cell therapy. Methods: Ten million cells of SVF were labeled with {sup 99m}Tc-HMPAO complex and excess radiolabel was cleared off through washing in PBS. The labeling efficiency of {sup 99m}Tc-HMPAO was detected in labeled cells and their subsequent supernatant wash using isotope dose calibrator and gamma camera. The cytotoxicity was assessed for the comparative reactive oxygen species (ROS) by H{sub 2}DCFDDA, apoptotic events by annexin-V and TUNEL assay and mitochondrial potential by JC-1. Results: An encouraging labeling efficiency of 33% was observed with {sup 99m}Tc-HMPAO complex. The radionuclide labeling of SVF demonstrated significant safety profile as evaluated by apoptotic assays. Conclusion: {sup 99m}Tc-HMPAO labeling efficiency of 33% of total SV fraction would produce sufficient radioactive signals that would enable for in vivo tracking of cells by SPECT-CT. The radionuclide did not demonstrate any significant impact on the structural or functional organization of the labeled cells. Our study indicates that SVF can be safely labeled with {sup 99m}Tc-HMPAO without adverse cytotoxic events and for its potential role in imaging cardiac stem cell therapy.

Brief introduction of GEF efficient industrial boiler project in China

Energy Technology Data Exchange (ETDEWEB)

Meijian, T.

1996-12-31

The present situation of installed industrial boilers, their efficiency and environmental impact are assessed. And the factors contribute to the low efficiency and serious pollution are summarized. Based on WB-assisted GEF project, {open_quotes}Efficient Industrial Boiler Project{close_quotes} aimed at CO{sub 2} mitigation in China, a series of effective measures to bring the GHG emission under control are addressed, in technology, system performance, and operation management aspects.

77 FR 75065 - Rescinding Spent Fuel Pool Exclusion Regulations

Science.gov (United States)

2012-12-19

... of the environmental impact analysis and severe accident mitigation alternatives (SAMA) analysis... subpart A, appendix B], because * * * many of the implications of the Fukushima accident for the Pilgrim... plant (NPP), in light of significant new information revealed by the Fukushima accident.'' The...

No Evidence of Trade-Off between Farm Efficiency and Resilience: Dependence of Resource-Use Efficiency on Land-Use Diversity.

Directory of Open Access Journals (Sweden)

Helena Kahiluoto

Full Text Available Efficiency in the use of resources stream-lined for expected conditions could lead to reduced system diversity and consequently endanger resilience. We tested the hypothesis of a trade-off between farm resource-use efficiency and land-use diversity. We applied stochastic frontier production models to assess the dependence of resource-use-efficiency on land-use diversity as illustrated by the Shannon-Weaver index. Total revenue in relation to use of capital, land and labour on the farms in Southern Finland with a size exceeding 30 ha was studied. The data were extracted from the Finnish Profitability Bookkeeping data. Our results indicate that there is either no trade-off or a negligible trade-off of no economic importance. The small dependence of resource-use efficiency on land-use diversity can be positive as well as negative. We conclude that diversification as a strategy to enhance farm resilience does not necessarily constrain resource-use efficiency.

Efficiency Assessment of Economic International Cooperation in Development of Arctic Offshore Oil and Gas Resources

Directory of Open Access Journals (Sweden)

Polina V. Beresneva

2015-01-01

Full Text Available The research is focused on efficiency assessment of economic cooperation in development of Arctic offshore oil and gas resources. The author developed an economic model based on cost-benefit analysis (CBA. CBA is used in some countries (EU, USA, Australia as an analytic tool to make public policy decisions. CBA is based on the method of discounting cash flows associated with costs and benefits of public policy. It is assumed that all public goals are equally important inter alia, hence public bodies should opt for those initiatives that maximize public benefits for every dollar spent from the state budget. There are five stages of economic modeling: 1 the definition of public benefits and costs associated with the public initiative; 2 monetary valuation of costs and benefits; 3 the definition of discounting period and discounting rate; 4 the calculation of net present value of cash flows; 5 the comparison of initiatives' net present values. The model is built with a number of hypotheses assumed. It allows making evaluation of investments into the technology to decrease the cost of Arctic offshore oil and gas development. Moreover, the model has two scenarios describing a public policy to support technology development with international economic cooperation and without it. Under given hypotheses both scenarios return positive net present value of policies which proves that governmental initiative to support Arctic technology development is economically justified. Also the model sows that the scenario with international cooperation is more efficient from economic point of view. It is explained by two factors: the higher speed of technology transfer (due W international cooperation and the opportunity to use financial leverage (attracting the funds from foreign partners. The model allows closing the existing scientific gap between the theory of CBA method and its practical use in public decision making.

Types Of Christian Tourism

Directory of Open Access Journals (Sweden)

Cornelia Petroman

2015-10-01

Full Text Available Christian tourism is asub-type of tourism where pilgrims travel alone or in group as missionaries orpilgrims or to spend their free time to recollect; it attracts a large numberof travellers. Christian tourism can be practiced by religious young people,missionaries, participants to religious convents, amateurs of religiouscruises, religious camps, visitors of religious attractions, religiousadventurers. Christian tourism can be considered a sub-type of religioustourism because of the large number of people involved in this type of tourismworldwide. Christian tourism as a sub-category of religious tourism coversthree main sub-types: traditional pilgrimage practiced by most world religions,missionary travel to different areas in the world, and confessional voyage. Thestructure of hospitality industry is common to all types of tourism but, fortraditional pilgrimage, there must be special places for the pilgrims to sleep,eat and pray, because they belong, in most cases, to the medium-income touristcategory.

Assessment of national waste generation in EU Member States’ efficiency

OpenAIRE

Halkos, George; Petrou, Kleoniki Natalia

2018-01-01

Waste generation and management may be considered as either a by-product of economic actions or even used as input to economic activity like energy recovery. Every country produces different amounts of municipal solid waste (MSW) and with different composition. This paper deals with the efficiency of 28 EU Member States for the years 2008, 2010 and 2012 by employing Data Envelopment Analysis (DEA) and by using eight parameters, namely waste generation, employment rate, capital formation, GDP,...

Evaluation of energy efficiency of various biogas production and utilization pathways

International Nuclear Information System (INIS)

Poeschl, Martina; Ward, Shane; Owende, Philip

2010-01-01

The energy efficiency of different biogas systems, including single and co-digestion of multiple feedstock, different biogas utilization pathways, and waste-stream management strategies was evaluated. The input data were derived from assessment of existing biogas systems, present knowledge on anaerobic digestion process management and technologies for biogas system operating conditions in Germany. The energy balance was evaluated as Primary Energy Input to Output (PEIO) ratio, to assess the process energy efficiency, hence, the potential sustainability. Results indicate that the PEIO correspond to 10.5-64.0% and 34.1-55.0% for single feedstock digestion and feedstock co-digestion, respectively. Energy balance was assessed to be negative for feedstock transportation distances in excess of 22 km and 425 km for cattle manure and for Municipal Solid Waste, respectively, which defines the operational limits for respective feedstock transportation. Energy input was highly influenced by the characteristics of feedstock used. For example, agricultural waste, in most part, did not require pre-treatment. Energy crop feedstock required the respect cultivation energy inputs, and processing of industrial waste streams included energy-demanding pre-treatment processes to meet stipulated hygiene standards. Energy balance depended on biogas yield, the utilization efficiency, and energy value of intended fossil fuel substitution. For example, obtained results suggests that, whereas the upgrading of biogas to biomethane for injection into natural gas network potentially increased the primary energy input for biogas utilization by up to 100%; the energy efficiency of the biogas system improved by up to 65% when natural gas was substituted instead of electricity. It was also found that, system energy efficiency could be further enhanced by 5.1-6.1% through recovery of residual biogas from enclosed digestate storage units. Overall, this study provides bases for more detailed assessment

CANDU fuel cycle economic efficiency assessments using the IAEA-MESSAGE-V code

International Nuclear Information System (INIS)

Prodea, Iosif; Margeanu, Cristina Alice; Aioanei, Corina; Prisecaru, Ilie; Danila, Nicolae

2007-01-01

The main goal of the paper is to evaluate different electricity generation costs in a CANDU Nuclear Power Plant (NPP) using different nuclear fuel cycles. The IAEA-MESSAGE code (Model for Energy Supply Strategy Alternatives and their General Environmental Impacts) will be used to accomplish these assessments. This complex tool was supplied by International Atomic Energy Agency (IAEA) in 2002 at 'IAEA-Regional Training Course on Development and Evaluation of Alternative Energy Strategies in Support of Sustainable Development' held in Institute for Nuclear Research Pitesti. It is worthy to remind that the sustainable development requires satisfying the energy demand of present generations without compromising the possibility of future generations to meet their own needs. Based on the latest public information in the next 10-15 years four CANDU-6 based NPP could be in operation in Romania. Two of them will have some enhancements not clearly specified, yet. Therefore we consider being necessary to investigate possibility to enhance the economic efficiency of existing in-service CANDU-6 power reactors. The MESSAGE program can satisfy these requirements if appropriate input models will be built. As it is mentioned in the dedicated issues, a major inherent feature of CANDU is its fuel cycle flexibility. Keeping this in mind, some proposed CANDU fuel cycles will be analyzed in the paper: Natural Uranium (NU), Slightly Enriched Uranium (SEU), Recovered Uranium (RU) with and without reprocessing. Finally, based on optimization of the MESSAGE objective function an economic hierarchy of CANDU fuel cycles will be proposed. The authors used mainly public information on different costs required by analysis. (authors)

Efficiency improvement opportunities in TVs: Implications for market transformation programs

International Nuclear Information System (INIS)

Park, Won Young; Phadke, Amol; Shah, Nihar; Letschert, Virginie

2013-01-01

Televisions (TVs) account for a significant portion of residential electricity consumption and global TV shipments are expected to continue to increase. We assess the market trends in the energy efficiency of TVs that are likely to occur without any additional policy intervention and estimate that TV efficiency will likely improve by over 60% by 2015 with savings potential of 45 terawatt-hours [TW h] per year in 2015, compared to today’s technology. We discuss various energy-efficiency improvement options and evaluate the cost effectiveness of three of them. At least one of these options improves efficiency by at least 20% cost effectively beyond ongoing market trends. We provide insights for policies and programs that can be used to accelerate the adoption of efficient technologies to further capture global energy savings potential from TVs which we estimate to be up to 23 TW h per year in 2015. - Highlights: • We analyze the impact of the recent TV market transition on TV energy consumption. • We review TV technology options that could be realized in the near future. • We assess the cost-effectiveness of selected energy-efficiency improvement options. • We estimate global electricity savings potential in selected scenarios. • We discuss possible directions of market transformation programs