WorldWideScience

Sample records for editors kiichiro taguchi

  1. taguchi methods

    African Journals Online (AJOL)

    Dr Obe

    markets, is the fundamental reason why American manufacturers have been, receptive to quality .... in the dimensions of the tiles that were being backed in the kiln. .... precision machinery. There is nothing special about phases one and three. Indeed Taguchi argues that in the. USA, in particular, the tendency has been to.

  2. Application of the taguchi method in change management

    Directory of Open Access Journals (Sweden)

    Kata Ivić

    2011-07-01

    Full Text Available Application of the Taguchi methods results in efficient optimization of performance, quality and price, fast and accurate gathering of technical information, design and production of highly reliable products and processes at low prices, development of flexible technologies for designing of a whole group of high quality associated products. All this significantly reduces the duration of research, development and delivery. The most frequent use of the Taguchi methods is to improve existing products and production processes and to reduce the need for experiments. The Taguchi methods is a system of quality engineering which puts more emphasis on reduction of production costs and giving advantage to efficient use of engineering strategies than on the use of advanced statistical methods.

  3. Incorporating Servqual-QFD with Taguchi Design for optimizing service quality design

    Science.gov (United States)

    Arbi Hadiyat, M.

    2018-03-01

    Deploying good service design in service companies has been updated issue in improving customer satisfaction, especially based on the level of service quality measured by Parasuraman’s SERVQUAL. Many researchers have been proposing methods in designing the service, and some of them are based on engineering viewpoint, especially by implementing the QFD method or even using robust Taguchi method. The QFD method would found the qualitative solution by generating the “how’s”, while Taguchi method gives more quantitative calculation in optimizing best solution. However, incorporating both QFD and Taguchi has been done in this paper and yields better design process. The purposes of this research is to evaluate the incorporated methods by implemented it to a case study, then analyze the result and see the robustness of those methods to customer perception of service quality. Started by measuring service attributes using SERVQUAL and find the improvement with QFD, the deployment of QFD solution then generated by defining Taguchi factors levels and calculating the Signal-to-noise ratio in its orthogonal array, and optimized Taguchi response then found. A case study was given for designing service in local bank. Afterward, the service design obtained from previous analysis was then evaluated and shows that it was still meet the customer satisfaction. Incorporating QFD and Taguchi has performed well and can be adopted and developed for another research for evaluating the robustness of result.

  4. Modified Mahalanobis Taguchi System for Imbalance Data Classification

    Directory of Open Access Journals (Sweden)

    Mahmoud El-Banna

    2017-01-01

    Full Text Available The Mahalanobis Taguchi System (MTS is considered one of the most promising binary classification algorithms to handle imbalance data. Unfortunately, MTS lacks a method for determining an efficient threshold for the binary classification. In this paper, a nonlinear optimization model is formulated based on minimizing the distance between MTS Receiver Operating Characteristics (ROC curve and the theoretical optimal point named Modified Mahalanobis Taguchi System (MMTS. To validate the MMTS classification efficacy, it has been benchmarked with Support Vector Machines (SVMs, Naive Bayes (NB, Probabilistic Mahalanobis Taguchi Systems (PTM, Synthetic Minority Oversampling Technique (SMOTE, Adaptive Conformal Transformation (ACT, Kernel Boundary Alignment (KBA, Hidden Naive Bayes (HNB, and other improved Naive Bayes algorithms. MMTS outperforms the benchmarked algorithms especially when the imbalance ratio is greater than 400. A real life case study on manufacturing sector is used to demonstrate the applicability of the proposed model and to compare its performance with Mahalanobis Genetic Algorithm (MGA.

  5. Modified Mahalanobis Taguchi System for Imbalance Data Classification

    Science.gov (United States)

    2017-01-01

    The Mahalanobis Taguchi System (MTS) is considered one of the most promising binary classification algorithms to handle imbalance data. Unfortunately, MTS lacks a method for determining an efficient threshold for the binary classification. In this paper, a nonlinear optimization model is formulated based on minimizing the distance between MTS Receiver Operating Characteristics (ROC) curve and the theoretical optimal point named Modified Mahalanobis Taguchi System (MMTS). To validate the MMTS classification efficacy, it has been benchmarked with Support Vector Machines (SVMs), Naive Bayes (NB), Probabilistic Mahalanobis Taguchi Systems (PTM), Synthetic Minority Oversampling Technique (SMOTE), Adaptive Conformal Transformation (ACT), Kernel Boundary Alignment (KBA), Hidden Naive Bayes (HNB), and other improved Naive Bayes algorithms. MMTS outperforms the benchmarked algorithms especially when the imbalance ratio is greater than 400. A real life case study on manufacturing sector is used to demonstrate the applicability of the proposed model and to compare its performance with Mahalanobis Genetic Algorithm (MGA). PMID:28811820

  6. Improved Taguchi method based contract capacity optimization for industrial consumer with self-owned generating units

    International Nuclear Information System (INIS)

    Yang, Hong-Tzer; Peng, Pai-Chun

    2012-01-01

    Highlights: ► We propose an improved Taguchi method to determine the optimal contract capacities with SOGUs. ► We solve the highly discrete and nonlinear optimization problem for the contract capacities with SOGUs. ► The proposed improved Taguchi method integrates PSO in Taguchi method. ► The customer using the proposed optimization approach may save up to 12.18% of power expenses. ► The improved Taguchi method can also be well applied to the other similar problems. - Abstract: Contract capacity setting for industrial consumer with self-owned generating units (SOGUs) is a highly discrete and nonlinear optimization problem considering expenditure on the electricity from the utility and operation costs of the SOGUs. This paper proposes an improved Taguchi method that combines existing Taguchi method and particle swarm optimization (PSO) algorithm to solve this problem. Taguchi method provides fast converging characteristics in searching the optimal solution through quality analysis in orthogonal matrices. The integrated PSO algorithm generates new solutions in the orthogonal matrices based on the searching experiences during the evolution process to further improve the quality of solution. To verify feasibility of the proposed method, the paper uses the real data obtained from a large optoelectronics factory in Taiwan. In comparison with the existing optimization methods, the proposed improved Taguchi method has superior performance as revealed in the numerical results in terms of the convergence process and the quality of solution obtained.

  7. A Gradient Taguchi Method for Engineering Optimization

    Science.gov (United States)

    Hwang, Shun-Fa; Wu, Jen-Chih; He, Rong-Song

    2017-10-01

    To balance the robustness and the convergence speed of optimization, a novel hybrid algorithm consisting of Taguchi method and the steepest descent method is proposed in this work. Taguchi method using orthogonal arrays could quickly find the optimum combination of the levels of various factors, even when the number of level and/or factor is quite large. This algorithm is applied to the inverse determination of elastic constants of three composite plates by combining numerical method and vibration testing. For these problems, the proposed algorithm could find better elastic constants in less computation cost. Therefore, the proposed algorithm has nice robustness and fast convergence speed as compared to some hybrid genetic algorithms.

  8. Abrasive wear resistance optimization of three different carbide coatings by the Taguchi method

    Energy Technology Data Exchange (ETDEWEB)

    Guer, Ali Kaya [Firat Univ., Elazig (Turkey). Dept. of Metallurgy and Materials; Kaya, Sinan [Firat Univ., Elazig (Turkey). Faculty of Technology

    2017-06-01

    In this study, FeCrC, SiC and B{sub 4}C powders were alloyed on the surface of AISI 430 ferritic stainless steel by plasma arc welding. The mass losses of the abrasive wear of the AISI 430 substrate were examined under the loads of 6, 10 and 16 N and in the distances of 10, 20 and 30 m by using Taguchi design method. The results of abrasive wear test were optimized by the minimum optimal control characteristics of the Taguchi procedure and the results were analyzed by using graphical methods. The Taguchi procedure is an important approach to achieve high quality without increasing the cost during the optimization of process parameters. The orthogonal planes of maximum effects of the controllable process parameters and minimum effects of uncontrollable process parameters were employed in the Taguchi method.

  9. A Comparison of Central Composite Design and Taguchi Method for Optimizing Fenton Process

    Directory of Open Access Journals (Sweden)

    Anam Asghar

    2014-01-01

    Full Text Available In the present study, a comparison of central composite design (CCD and Taguchi method was established for Fenton oxidation. Dyeini, Dye : Fe+2, H2O2 : Fe+2, and pH were identified control variables while COD and decolorization efficiency were selected responses. L9 orthogonal array and face-centered CCD were used for the experimental design. Maximum 99% decolorization and 80% COD removal efficiency were obtained under optimum conditions. R squared values of 0.97 and 0.95 for CCD and Taguchi method, respectively, indicate that both models are statistically significant and are in well agreement with each other. Furthermore, Prob > F less than 0.0500 and ANOVA results indicate the good fitting of selected model with experimental results. Nevertheless, possibility of ranking of input variables in terms of percent contribution to the response value has made Taguchi method a suitable approach for scrutinizing the operating parameters. For present case, pH with percent contribution of 87.62% and 66.2% was ranked as the most contributing and significant factor. This finding of Taguchi method was also verified by 3D contour plots of CCD. Therefore, from this comparative study, it is concluded that Taguchi method with 9 experimental runs and simple interaction plots is a suitable alternative to CCD for several chemical engineering applications.

  10. Taguchi method for partial differential equations with application in tumor growth.

    Science.gov (United States)

    Ilea, M; Turnea, M; Rotariu, M; Arotăriţei, D; Popescu, Marilena

    2014-01-01

    The growth of tumors is a highly complex process. To describe this process, mathematical models are needed. A variety of partial differential mathematical models for tumor growth have been developed and studied. Most of those models are based on the reaction-diffusion equations and mass conservation law. A variety of modeling strategies have been developed, each focusing on tumor growth. Systems of time-dependent partial differential equations occur in many branches of applied mathematics. The vast majority of mathematical models in tumor growth are formulated in terms of partial differential equations. We propose a mathematical model for the interactions between these three cancer cell populations. The Taguchi methods are widely used by quality engineering scientists to compare the effects of multiple variables, together with their interactions, with a simple and manageable experimental design. In Taguchi's design of experiments, variation is more interesting to study than the average. First, Taguchi methods are utilized to search for the significant factors and the optimal level combination of parameters. Except the three parameters levels, other factors levels other factors levels would not be considered. Second, cutting parameters namely, cutting speed, depth of cut, and feed rate are designed using the Taguchi method. Finally, the adequacy of the developed mathematical model is proved by ANOVA. According to the results of ANOVA, since the percentage contribution of the combined error is as small. Many mathematical models can be quantitatively characterized by partial differential equations. The use of MATLAB and Taguchi method in this article illustrates the important role of informatics in research in mathematical modeling. The study of tumor growth cells is an exciting and important topic in cancer research and will profit considerably from theoretical input. Interpret these results to be a permanent collaboration between math's and medical oncologists.

  11. DNAAlignEditor: DNA alignment editor tool

    Directory of Open Access Journals (Sweden)

    Guill Katherine E

    2008-03-01

    Full Text Available Abstract Background With advances in DNA re-sequencing methods and Next-Generation parallel sequencing approaches, there has been a large increase in genomic efforts to define and analyze the sequence variability present among individuals within a species. For very polymorphic species such as maize, this has lead to a need for intuitive, user-friendly software that aids the biologist, often with naïve programming capability, in tracking, editing, displaying, and exporting multiple individual sequence alignments. To fill this need we have developed a novel DNA alignment editor. Results We have generated a nucleotide sequence alignment editor (DNAAlignEditor that provides an intuitive, user-friendly interface for manual editing of multiple sequence alignments with functions for input, editing, and output of sequence alignments. The color-coding of nucleotide identity and the display of associated quality score aids in the manual alignment editing process. DNAAlignEditor works as a client/server tool having two main components: a relational database that collects the processed alignments and a user interface connected to database through universal data access connectivity drivers. DNAAlignEditor can be used either as a stand-alone application or as a network application with multiple users concurrently connected. Conclusion We anticipate that this software will be of general interest to biologists and population genetics in editing DNA sequence alignments and analyzing natural sequence variation regardless of species, and will be particularly useful for manual alignment editing of sequences in species with high levels of polymorphism.

  12. Applying the Taguchi method to river water pollution remediation strategy optimization.

    Science.gov (United States)

    Yang, Tsung-Ming; Hsu, Nien-Sheng; Chiu, Chih-Chiang; Wang, Hsin-Ju

    2014-04-15

    Optimization methods usually obtain the travel direction of the solution by substituting the solutions into the objective function. However, if the solution space is too large, this search method may be time consuming. In order to address this problem, this study incorporated the Taguchi method into the solution space search process of the optimization method, and used the characteristics of the Taguchi method to sequence the effects of the variation of decision variables on the system. Based on the level of effect, this study determined the impact factor of decision variables and the optimal solution for the model. The integration of the Taguchi method and the solution optimization method successfully obtained the optimal solution of the optimization problem, while significantly reducing the solution computing time and enhancing the river water quality. The results suggested that the basin with the greatest water quality improvement effectiveness is the Dahan River. Under the optimal strategy of this study, the severe pollution length was reduced from 18 km to 5 km.

  13. Optimization of cooling tower performance analysis using Taguchi method

    Directory of Open Access Journals (Sweden)

    Ramkumar Ramakrishnan

    2013-01-01

    Full Text Available This study discuss the application of Taguchi method in assessing maximum cooling tower effectiveness for the counter flow cooling tower using expanded wire mesh packing. The experiments were planned based on Taguchi’s L27 orthogonal array .The trail was performed under different inlet conditions of flow rate of water, air and water temperature. Signal-to-noise ratio (S/N analysis, analysis of variance (ANOVA and regression were carried out in order to determine the effects of process parameters on cooling tower effectiveness and to identity optimal factor settings. Finally confirmation tests verified this reliability of Taguchi method for optimization of counter flow cooling tower performance with sufficient accuracy.

  14. Determination of optimum thermal debinding and sintering process parameters using Taguchi Method

    CSIR Research Space (South Africa)

    Seerane, M

    2015-07-01

    Full Text Available powder and a wax-based binder. The binder’s backbone component is a low density polyethylene (LDPE). Careful selection of thermal debinding parameters was guided by thermo- gravimetric analysis (TGA) results. The Taguchi method was used to determine... International Light Metals Technology Conference (LMT 2015), Port Elizabeth, South Africa, July 27-29 Determination of Optimum Process for Thermal Debinding and Sintering using Taguchi Method SEERANE Mandya,*, CHIKWANDA Hildab, MACHAKA Ronaldc CSIR...

  15. Optimization of PID Parameters Utilizing Variable Weight Grey-Taguchi Method and Particle Swarm Optimization

    Science.gov (United States)

    Azmi, Nur Iffah Mohamed; Arifin Mat Piah, Kamal; Yusoff, Wan Azhar Wan; Romlay, Fadhlur Rahman Mohd

    2018-03-01

    Controller that uses PID parameters requires a good tuning method in order to improve the control system performance. Tuning PID control method is divided into two namely the classical methods and the methods of artificial intelligence. Particle swarm optimization algorithm (PSO) is one of the artificial intelligence methods. Previously, researchers had integrated PSO algorithms in the PID parameter tuning process. This research aims to improve the PSO-PID tuning algorithms by integrating the tuning process with the Variable Weight Grey- Taguchi Design of Experiment (DOE) method. This is done by conducting the DOE on the two PSO optimizing parameters: the particle velocity limit and the weight distribution factor. Computer simulations and physical experiments were conducted by using the proposed PSO- PID with the Variable Weight Grey-Taguchi DOE and the classical Ziegler-Nichols methods. They are implemented on the hydraulic positioning system. Simulation results show that the proposed PSO-PID with the Variable Weight Grey-Taguchi DOE has reduced the rise time by 48.13% and settling time by 48.57% compared to the Ziegler-Nichols method. Furthermore, the physical experiment results also show that the proposed PSO-PID with the Variable Weight Grey-Taguchi DOE tuning method responds better than Ziegler-Nichols tuning. In conclusion, this research has improved the PSO-PID parameter by applying the PSO-PID algorithm together with the Variable Weight Grey-Taguchi DOE method as a tuning method in the hydraulic positioning system.

  16. Applying the Taguchi Method to River Water Pollution Remediation Strategy Optimization

    Directory of Open Access Journals (Sweden)

    Tsung-Ming Yang

    2014-04-01

    Full Text Available Optimization methods usually obtain the travel direction of the solution by substituting the solutions into the objective function. However, if the solution space is too large, this search method may be time consuming. In order to address this problem, this study incorporated the Taguchi method into the solution space search process of the optimization method, and used the characteristics of the Taguchi method to sequence the effects of the variation of decision variables on the system. Based on the level of effect, this study determined the impact factor of decision variables and the optimal solution for the model. The integration of the Taguchi method and the solution optimization method successfully obtained the optimal solution of the optimization problem, while significantly reducing the solution computing time and enhancing the river water quality. The results suggested that the basin with the greatest water quality improvement effectiveness is the Dahan River. Under the optimal strategy of this study, the severe pollution length was reduced from 18 km to 5 km.

  17. Robust Optimization in Simulation : Taguchi and Krige Combined

    NARCIS (Netherlands)

    Dellino, G.; Kleijnen, Jack P.C.; Meloni, C.

    2009-01-01

    Optimization of simulated systems is the goal of many methods, but most methods as- sume known environments. We, however, develop a `robust' methodology that accounts for uncertain environments. Our methodology uses Taguchi's view of the uncertain world, but replaces his statistical techniques by

  18. Robust optimization in simulation : Taguchi and Krige combined

    NARCIS (Netherlands)

    Dellino, G.; Kleijnen, Jack P.C.; Meloni, C.

    2012-01-01

    Optimization of simulated systems is the goal of many methods, but most methods assume known environments. We, however, develop a “robust” methodology that accounts for uncertain environments. Our methodology uses Taguchi's view of the uncertain world but replaces his statistical techniques by

  19. Taguchi Ukichi, un libéral opiniâtre de l’ère Meiji

    OpenAIRE

    Hurth, Pascal

    2014-01-01

    Journaliste, historien et homme politique, Taguchi Ukichi s’est fait le chantre du libéralisme à la fin du xixe siècle en défendant le libre-échange et en s’opposant aux propriétaires fonciers. Champion of Liberalism at the end of the 19th century, Taguchi Ukichi (journalist, historian and politician) was a staunch advocate of free trade, strongly opposed to landowners.

  20. Robust Optimization in Simulation : Taguchi and Response Surface Methodology

    NARCIS (Netherlands)

    Dellino, G.; Kleijnen, J.P.C.; Meloni, C.

    2008-01-01

    Optimization of simulated systems is tackled by many methods, but most methods assume known environments. This article, however, develops a 'robust' methodology for uncertain environments. This methodology uses Taguchi's view of the uncertain world, but replaces his statistical techniques by

  1. Taguchi Approach to Design Optimization for Quality and Cost: An Overview

    Science.gov (United States)

    Unal, Resit; Dean, Edwin B.

    1990-01-01

    Calibrations to existing cost of doing business in space indicate that to establish human presence on the Moon and Mars with the Space Exploration Initiative (SEI) will require resources, felt by many, to be more than the national budget can afford. In order for SEI to succeed, we must actually design and build space systems at lower cost this time, even with tremendous increases in quality and performance requirements, such as extremely high reliability. This implies that both government and industry must change the way they do business. Therefore, new philosophy and technology must be employed to design and produce reliable, high quality space systems at low cost. In recognizing the need to reduce cost and improve quality and productivity, Department of Defense (DoD) and National Aeronautics and Space Administration (NASA) have initiated Total Quality Management (TQM). TQM is a revolutionary management strategy in quality assurance and cost reduction. TQM requires complete management commitment, employee involvement, and use of statistical tools. The quality engineering methods of Dr. Taguchi, employing design of experiments (DOE), is one of the most important statistical tools of TQM for designing high quality systems at reduced cost. Taguchi methods provide an efficient and systematic way to optimize designs for performance, quality, and cost. Taguchi methods have been used successfully in Japan and the United States in designing reliable, high quality products at low cost in such areas as automobiles and consumer electronics. However, these methods are just beginning to see application in the aerospace industry. The purpose of this paper is to present an overview of the Taguchi methods for improving quality and reducing cost, describe the current state of applications and its role in identifying cost sensitive design parameters.

  2. Applying the Taguchi method for optimized fabrication of bovine ...

    African Journals Online (AJOL)

    SERVER

    2008-02-19

    Feb 19, 2008 ... Nanobiotechnology Research Lab., School of Chemical Engineering, Babol University of Technology, Po.Box: 484, ... nanoparticle by applying the Taguchi method with characterization of the ... of BSA/ethanol and organic solvent adding rate. ... Sodium aside and all other chemicals were purchased from.

  3. From the Editor

    OpenAIRE

    Ugur Demiray

    2011-01-01

    Turkish Online Journal of Distance Education-TOJDE April 2011 ISSN 1302-6488 Volume: 12 Number: 2 from EditorGreetings Dear readers of TOJDE,TOJDE is appeared on your screen now as Volume 12, Number: 2. In this issue it is published 4 notes for Editor, 14 articles, 1 book review. And this time, 43 authors from 10 different countries are placed. These published articles are from Austrlia, Bangldesh, India, lndonasia, Iran, Malaysia. Pakistan, Serbia, Turkey and USA.The first Notes for editor a...

  4. OPM Scheme Editor 2: A graphical editor for specifying object-protocol structures

    Energy Technology Data Exchange (ETDEWEB)

    Chen, I-Min A.; Markowitz, V.M.; Pang, F.; Ben-Shachar, O.

    1993-07-01

    This document describes an X-window based Schema Editor for the Object-Protocol Model (OPM). OPM is a data model that supports the specification of complex object and protocol classes. objects and protocols are qualified in OPM by attributes that are defined over (associated with) value classes. Connections of object and protocol classes are expressed in OPM via attributes. OPM supports the specification (expansion) of protocols in terms of alternative and sequences of component (sub) protocols. The OPM Schema Editor allows specifying, displaying, modifying, and browsing through OPM schemas. The OPM Schema Editor generates an output file that can be used as input to an OPM schema translation tool that maps OPM schemas into definitions for relational database management systems. The OPM Schema Editor was implemented using C++ and the X11 based Motif toolkit, on Sun SPARCstation under Sun Unix OS 4.1. This document consists of the following parts: (1) A tutorial consisting of seven introductory lessons for the OPM Schema Editor. (2) A reference manual describing all the windows and functions of the OPM Schema Editor. (3) An appendix with an overview of OPM.

  5. Examining Editor-Author Ethics: Real-World Scenarios from Interviews with Three Journal Editors

    Science.gov (United States)

    Amare, Nicole; Manning, Alan

    2009-01-01

    Those who submit manuscripts to academic journals may benefit from a better understanding of how editors weigh ethics in their interactions with authors. In an attempt to ascertain and to understand editors' ethics, we interviewed 3 current academic journal editors of technical and/or business communication journals. We asked them about the…

  6. Application of Taguchi method for cutting force optimization in rock ...

    Indian Academy of Sciences (India)

    Mechanical properties Uniaxial compressive strength. Sawing characteristics .... texture, coarse-grained, grains between 0.08 mm and 4.80 mm, and the coarsest ..... piezoelectric ceramic of Bi0.5Na0.5TiO3 using the Taguchi method. Powder ...

  7. Developing an optimum protocol for thermoluminescence dosimetry with gr-200 chips using Taguchi method

    International Nuclear Information System (INIS)

    Sadeghi, Maryam; Faghihi, Reza; Sina, Sedigheh

    2017-01-01

    Thermoluminescence dosimetry (TLD) is a powerful technique with wide applications in personal, environmental and clinical dosimetry. The optimum annealing, storage and reading protocols are very effective in accuracy of TLD response. The purpose of this study is to obtain an optimum protocol for GR-200; LiF: Mg, Cu, P, by optimizing the effective parameters, to increase the reliability of the TLD response using Taguchi method. Taguchi method has been used in this study for optimization of annealing, storage and reading protocols of the TLDs. A number of 108 GR-200 chips were divided into 27 groups, each containing four chips. The TLDs were exposed to three different doses, and stored, annealed and read out by different procedures as suggested by Taguchi Method. By comparing the signal-to-noise ratios the optimum dosimetry procedure was obtained. According to the results, the optimum values for annealing temperature (de.C), Annealing Time (s), Annealing to Exposure time (d), Exposure to Readout time (d), Pre-heat Temperature (de.C), Pre-heat Time (s), Heating Rate (de.C/s), Maximum Temperature of Readout (de.C), readout time (s) and Storage Temperature (de.C) are 240, 90, 1, 2, 50, 0, 15, 240, 13 and -20, respectively. Using the optimum protocol, an efficient glow curve with low residual signals can be achieved. Using optimum protocol obtained by Taguchi method, the dosimetry can be effectively performed with great accuracy. (authors)

  8. MENENTUKAN KOMBINASI OPTIMAL PARAMETER COFFEE ROASTING UNTUK MENDAPATKAN ROASTED BEAN DENGAN TINGKAT KEMATANGAN MEDIUM ROAST MENGGUNAKAN METODE TAGUCHI

    Directory of Open Access Journals (Sweden)

    Arya Anantama R

    2015-11-01

    Full Text Available Penelitian dilakukan dengan Metode Taguchi untuk menentukan kombinasi optimal dari parameter coffeeroasting. Parameter yang diteliti adalah lamanya waktu roasting sebagai faktor A dan volume biji total untuk sekali proses roasting sebagai faktor B.Eksperimen dilakukan dengan tiga level dan tiga nilai untuk masing-masing faktor. Dari hasil Eksperimen Taguchi didapatkan bahwa level faktor yang memberikan pengaruh yang signifikan terhadap roasted bean adalah faktor A pada level 2 dan faktor B pada level 1. Berdasarkan nilai rata-rata roastedbean dan nilai SNR yang dihasilkan, terlihat bahwa faktor A2 (75 menit dan faktor B1 (2 kg menghasilkan nilai rata-rata roasted bean sesuai dengan nilai yang dituju. Eksperimen Konfirmasi dilakukan dengan menggunakan parameter yang dianggap terbaik. Hasil Eksperimen Konfirmasi menunjukkan kombinasi fakor A2 dengan B1 merupakan kombinasi yang optimal untuk mendapatkan roasted bean kualitas premium. Kata Kunci : coffee roasting; kopi, taguchi; roasted bean Abstract The research is done using Taguchi Method to determine optimum combination of coffee roasting parameters. These parameters consist of roasting time as factor A and total volume of every roasting process as factor B.Experiment is conducted within three levels and three values for each factor. Taguchi Method result shows that significant influence toward roasted bean comes from level 2 on factor A and level 1 on factor B. Based on average value of roasted bean and SNR value, factor A2 (75 minutes and factor B1 (2 kg produced average value of roasted bean in accordance to set value. Confirmation experiment is performed with parameters that are most suitable. The result of confirmation experiment shows combination of A2 and B1 as optimum combination to exercise premium quality roasted bean. Keyword : coffee roasting; coffe; taguchi; roasted bean

  9. Experimental Optimization In Polymer BLEND Composite Preparation Based On Mix Level of Taguchi Robust Design

    International Nuclear Information System (INIS)

    Abdul Aziz Mohamed; Jaafar Abdullah; Dahlan Mohd; Rozaidi Rasid; Megat Harun AlRashid Megat Ahmad; Mahathir Mohamad; Mohd Hamzah Harun

    2012-01-01

    L 18 orthogonal array in mix level of Taguchi robust design method was carried out to optimize experimental conditions for the preparation of polymer blend composite. Tensile strength and neutron absorption of the composite were the properties of interest. Filler size, filler loading, ball mixing time and dispersion agent concentration were selected as parameters or factors which are expected to affect the composite properties. As a result of Taguchi analysis, filler loading was the most influencing parameter on the tensile strength and neutron absorption. The least influencing was ball-mixing time. The optimal conditions were determined by using mix-level Taguchi robust design method and a polymer composite with tensile strength of 6.33 MPa was successfully prepared. The composite was found to fully absorb thermal neutron flux of 1.04 x 10 5 n/ cm 2 / s with only 2 mm in thickness. In addition, the filler was also characterized by scanning electron microscopy (SEM) and elemental analysis (EDX). (Author)

  10. Developing an Optimum Protocol for Thermoluminescence Dosimetry with GR-200 Chips using Taguchi Method.

    Science.gov (United States)

    Sadeghi, Maryam; Faghihi, Reza; Sina, Sedigheh

    2017-06-15

    Thermoluminescence dosimetry (TLD) is a powerful technique with wide applications in personal, environmental and clinical dosimetry. The optimum annealing, storage and reading protocols are very effective in accuracy of TLD response. The purpose of this study is to obtain an optimum protocol for GR-200; LiF: Mg, Cu, P, by optimizing the effective parameters, to increase the reliability of the TLD response using Taguchi method. Taguchi method has been used in this study for optimization of annealing, storage and reading protocols of the TLDs. A number of 108 GR-200 chips were divided into 27 groups, each containing four chips. The TLDs were exposed to three different doses, and stored, annealed and read out by different procedures as suggested by Taguchi Method. By comparing the signal-to-noise ratios the optimum dosimetry procedure was obtained. According to the results, the optimum values for annealing temperature (°C), Annealing Time (s), Annealing to Exposure time (d), Exposure to Readout time (d), Pre-heat Temperature (°C), Pre-heat Time (s), Heating Rate (°C/s), Maximum Temperature of Readout (°C), readout time (s) and Storage Temperature (°C) are 240, 90, 1, 2, 50, 0, 15, 240, 13 and -20, respectively. Using the optimum protocol, an efficient glow curve with low residual signals can be achieved. Using optimum protocol obtained by Taguchi method, the dosimetry can be effectively performed with great accuracy. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  11. From Editor

    OpenAIRE

    Ugur DEmiray

    2011-01-01

    Greetings Dear readers of TOJDE,TOJDE is appeared on your screen now as Volume 12, Number: 1. In this issue it is published 4 notes for Editor, 13 articles, 2 book reviews. And this time, 34 authors from 11 different countries are placed. These published articles are from Cayman Islands, Germany, Greece, India, Iran, Malaysia, Pakistan, Turkey, USA and Zimbabwe.The first Notes for editor arrived from USA, written by Kevin YEE and Jace HARGIS. They focused on “SNAPP:Graphing Student Interactio...

  12. From Editor

    OpenAIRE

    Ugur DEMIRAY

    2012-01-01

    Turkish Online Journal of Distance Education-TOJDE July 2012 ISSN 1302-6488 Volume: 13 Number: 3 from EditorDear TOJDE Readers,Welcome to the Volume 13 Number: 3 of TOJDE! In this issue, 2 Notes for Editor and 26 articles of 51 authors from 14 different countries around the world have been published. These published articles are from, Algeria, Australia, Bengaldesh, Greece, India, Iran, Malaysia, Mariutius, Nigeria, Oman, Spain, Turkey, USA and Zimbabwe.First all, you should know that if a su...

  13. From Editor

    OpenAIRE

    Ugur Demiray

    2013-01-01

    Dear TOJDE Readers, Welcome to the Volume 14 Number: 2 of TOJDE! In this issue, 3 Notes for Editor, 2 Book Reviews and 21 articles of 40 authors from 14 different countries around the world have been published. These published articles are arrived to the TOJDE from Argentina, Australia, Bosnia Hersek, Egypt, India, Malaysia, Romania, Saudi Arabia, Tanzania, Thailand, Turkey, United Arab Emirate and USA. The 1st Notes for Editor is arrived from USA and written by Gail D. CARUTH,...

  14. Becoming an Online Editor: Perceived Roles and Responsibilities of Wikipedia Editors

    Science.gov (United States)

    Littlejohn, Allison; Hood, Nina

    2018-01-01

    Introduction: We report on the experiences of a group of people as they become Wikipedia editors. We test Benkler's (2002) theory that commons-based production processes accelerate the creation of capital, questioning what knowledge production processes do people engage in as they become editors? The analysis positions the development of editing…

  15. OPTIMASI PARAMETER MESIN LASER CUTTING TERHADAP KEKASARAN DAN LAJU PEMOTONGAN PADA SUS 316L MENGGUNAKAN TAGUCHI GREY RELATIONAL ANALYSIS METHOD

    Directory of Open Access Journals (Sweden)

    Rakasita R

    2016-06-01

    Full Text Available Optimasi parameter adalah teknik yang digunakan pada proses manufaktur untuk menghasilkan produk terbaik. Penelitian ini bertujuan untuk mengoptimasi parameter CNC laser cutting, yaitu titik fokus sinar laser, tekanan gas cutting dan cutting speed untuk mengurangi variasi terhadap respon kekasaran dan laju pemotongan pada material SUS 316L. Masing-masing parameter memiliki 3 level dan pada penelitian ini menggunakan matriks orthogonal L9 (34. Metode ANOVA dan Taguchi digunakan untuk menganalisis data hasil percobaan. Optimasi kekasaran minimum permukaan dan laju pemotongan maksimum pada proses laser cutting dilakukan dengan menggunakan Grey relational analysis. Eksperimen konfirmasi digunakan untuk membuktikan hasil optimal yang telah didapatkan dari metode Taguchi Grey relational analysis. Hasil eksperimen menunjukkan bahwa Taguchi Grey relational analysis efektif digunakan untuk mengoptimasi parameter pemesinan pada laser cutting dengan multi respon.   Abstract Parameter optimization is used in manufacturing as an indicator to produce the best manufacturing product. This paper studies an optimization parameters of CNC laser cutting such as focus of laser beam, pressure cutting gases and cutting speed for reducing variation of surface roughness and cutting rate on material SUS 316L. Based on L9(34 orthogonal array parameters, it is analized using ANOVA based on Taguchi method. In order to optimaze the minimum surface roughness and maximum cutting rate in laser cutting process, it is used Grey relational analysis. The confirmation experiments used to validate the optimal results that has done by Taguchi method. The results show that the Taguchi Grey relational analysis is being effective to optimize the machining parameters for laser cutting process with two responses.

  16. A CDL written intercom editor

    International Nuclear Information System (INIS)

    Marinescu, D.S.; Shirikov, V.P.

    1977-01-01

    This report contains the formalized description of the program EDITOR which is the most important part of the teleprocessing system INTERCOM driving terminals for CDC series 6000 and CYBER computers. CDL (Compiler Description language) is used for this description. EDITOR is a tool for the text file acquisition and modifications. It also gives the possibility to execute some commands to the computer software. The EDITOR independent description may be used for the implementation of EDITOR-like programmes for different types of computers (is particular, small computers)

  17. Optimization of Squeeze Casting Parameters for 2017 A Wrought Al Alloy Using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Najib Souissi

    2014-04-01

    Full Text Available This study applies the Taguchi method to investigate the relationship between the ultimate tensile strength, hardness and process variables in a squeeze casting 2017 A wrought aluminium alloy. The effects of various casting parameters including squeeze pressure, melt temperature and die temperature were studied. Therefore, the objectives of the Taguchi method for the squeeze casting process are to establish the optimal combination of process parameters and to reduce the variation in quality between only a few experiments. The experimental results show that the squeeze pressure significantly affects the microstructure and the mechanical properties of 2017 A Al alloy.

  18. From Editor

    OpenAIRE

    Ugur Demiray

    2012-01-01

    Dear TOJDE Readers,Welcome to the Volume 13 Number: 2 of TOJDE! In this issue, 7 notes for Editor and 22 articles one book review of 57 authors from 12 different countries have been published. These published articles are from, Barbados, Ethiopia, India, Indonesia, Iran, Nigeria, Pakistan, Russia, Saudi Arabia, Turkey, USA and Zimbabwe.In general, around 13 articles and 4 notes for editors have been published in TOJDE so far. I would like to explain, why this time 22 articles and 8 submission...

  19. From Editor

    OpenAIRE

    Ugur Demiray

    2010-01-01

    Greetings Dear readers of TOJDE,TOJDE is appeared on your screen now again after 3 months as Volume 11, Number: 2. This is the second issue of the year 2010. In this issue it is published four Notes for Editor, fourteen articles and four book reviews. And this time, 37 authors from 8 different countries are placed. These published articles are from Greece, Indonesia, Iran, Malaysia, Pakistan, Saudi Arabia, USA and Turkey.Again Kevin YEE & Jace HARGIS have sent a good and short note to editor ...

  20. ISTP CDF Skeleton Editor

    Science.gov (United States)

    Chimiak, Reine; Harris, Bernard; Williams, Phillip

    2013-01-01

    Basic Common Data Format (CDF) tools (e.g., cdfedit) provide no specific support for creating International Solar-Terrestrial Physics/Space Physics Data Facility (ISTP/SPDF) standard files. While it is possible for someone who is familiar with the ISTP/SPDF metadata guidelines to create compliant files using just the basic tools, the process is error-prone and unreasonable for someone without ISTP/SPDF expertise. The key problem is the lack of a tool with specific support for creating files that comply with the ISTP/SPDF guidelines. There are basic CDF tools such as cdfedit and skeletoncdf for creating CDF files, but these have no specific support for creating ISTP/ SPDF compliant files. The SPDF ISTP CDF skeleton editor is a cross-platform, Java-based GUI editor program that allows someone with only a basic understanding of the ISTP/SPDF guidelines to easily create compliant files. The editor is a simple graphical user interface (GUI) application for creating and editing ISTP/SPDF guideline-compliant skeleton CDF files. The SPDF ISTP CDF skeleton editor consists of the following components: A swing-based Java GUI program, JavaHelp-based manual/ tutorial, Image/Icon files, and HTML Web page for distribution. The editor is available as a traditional Java desktop application as well as a Java Network Launching Protocol (JNLP) application. Once started, it functions like a typical Java GUI file editor application for creating/editing application-unique files.

  1. Integrasi Taguchi Loss Function dengan Fuzzy Analytical Hierarchy Process dalam Pemilih Pemasok

    Directory of Open Access Journals (Sweden)

    Ahmad S. Indrapriyatna

    2011-01-01

    Full Text Available One important issue in the line production is the selection of the company's best supplier. Various criteria should be considered for determining the best supplier. Answering to that challenge, we apply Taguchi loss function- Analytical Hierarchy Process Fuzzy-Linear Programming (Taguchi loss function-Fuzzy AHP to find out the best supplier. Moreover, we also consider multiple criteria, i.e., goods’ completeness, quality, delivery, and quality loss in that analysis. By maximizing the suppliers’ performances based on each criterion and aggregated the suppliers’ performances based on the overall criteria, we selected the best one. Applying this method for selecting the best pressure gauge’s supplier in PT. Coca Cola Bottling Indonesia Central Sumatera (PT. CCBICS, we found out that among three suppliers, the second supplier is the best one.

  2. Factors Affecting Optimal Surface Roughness of AISI 4140 Steel in Turning Operation Using Taguchi Experiment

    Science.gov (United States)

    Novareza, O.; Sulistiyarini, D. H.; Wiradmoko, R.

    2018-02-01

    This paper presents the result of using Taguchi method in turning process of medium carbon steel of AISI 4140. The primary concern is to find the optimal surface roughness after turning process. The taguchi method is used to get a combination of factors and factor levels in order to get the optimum surface roughness level. Four important factors with three levels were used in experiment based on Taguchi method. A number of 27 experiments were carried out during the research and analysed using analysis of variance (ANOVA) method. The result of surface finish was determined in Ra type surface roughness. The depth of cut was found to be the most important factors for reducing the surface roughness of AISI 4140 steel. On the contrary, the other important factors i.e. spindle speed and rake side angle of the tool were proven to be less factors that affecting the surface finish. It is interesting to see the effect of coolant composition that gained the second important factors to reduce the roughness. It may need further research to explain this result.

  3. Analysis and design of a Taguchi-Grey based electricity demand predictor for energy management systems

    International Nuclear Information System (INIS)

    Yao, Albert W.L.; Chi, S.C.

    2004-01-01

    In order to use electricity efficiently, a demand control management system is one of the effective ways to reduce energy consumption and electric bills. An electricity demand control system is used as a means to monitor and manage the usage of electricity effectively. Moreover, it is a useful tool for avoiding penalties beyond the contracted demand value of electricity with the electric power company. In this project, we developed a Taguchi-Grey based predictor to forecast the demand value of electricity on line. In a Grey prediction, the parameter settings are highly relevant to the accuracy of forecasting. A Taguchi method was employed to optimize the parameter settings for the Grey based electricity demand value predictor. Our experimental results show that the optimal parameter settings of the Grey prediction are α=0.4, five point modeling and three minute sampling time of the data acquisition system. The improved Taguchi-Grey based electricity demand predictor in conjunction with the PC based electricity demand control system is a cost effective and efficient means to manage the usage of electricity

  4. Good editorial practice: editors as educators.

    Science.gov (United States)

    Marusić, M; Marusić, A

    2001-04-01

    There may be valuable research going on in the developing and financially less-privileged countries, but it usually does not reach international visibility, in spite of a large number of scientific journals in these countries. Such journals are not only invisible but, by perpetuating a vicious circle of inadequacy, may be directly damaging to the local science and research culture. We call for an international action to help journal editors in less privileged countries. International associations of editors may be leaders of these activities by defining, promoting, and perhaps controlling good editorial practice, as a main criterion for international recognition of a journal. However, the editors of small journals have the power and moral obligation to become a stronghold of quality and advancement in their scientific community. Their educational "tools" are editorial integrity and author-friendly policy. Editors can teach the authors study design, statistical analysis, precision, punctuality, research integrity, style and format of writing, and other aspects of scientific communication. The editors of "big", mainstream scientific journals can act as global educators, teaching and providing guidance to editors of small journals. The editors from developed countries as leaders, and editors from less advantageous environments as teachers are the key figures in shaping research communication in less privileged scientific communities.

  5. Application of Taguchi method for cutting force optimization in rock

    Indian Academy of Sciences (India)

    In this paper, an optimization study was carried out for the cutting force (Fc) acting on circular diamond sawblades in rock sawing. The peripheral speed, traverse speed, cut depth and flow rate of cooling fluid were considered as operating variables and optimized by using Taguchi approach for the Fc. L16(44) orthogonal ...

  6. Optimization of an anti-HER2 nanobody expression using the Taguchi method.

    Science.gov (United States)

    Farasat, Alireza; Rahbarizadeh, Fatemeh; Ahmadvand, Davoud; Yazdian, Fatemeh

    2017-09-14

    Despite being widely used in immunotherapy of cancer, whole antibodies are limited by several disadvantages. This has led to the advent of novel biomolecules such as nanobodies. Taguchi method is a statistical experimental design to study the effect of multiple variables in biological processes. In an effort to overexpress a recombinant anti-human epidermal growth factor receptor type 2 (HER2) nanobody, we performed a detailed study to find optimal condition of temperature, induction, culture media, vector, and host strain, using Taguchi methodology. A total of 16 various experiments were designed. Total protein of the formulated cultures were assessed by Bradford test and sodium dodecyl sulfate-polyacrylamide gel electrophoresis, followed by size exclusion high performance liquid chromatography to quantify the relative concentration of the nanobody in different expression settings. Western blotting was performed to confirm the expression of the anti-HER2 nanobody. When, individually, optimum parameters determined by Taguchi were applied, including SHuffle strain cultured in LB medium, induced with 0.4 mM isopropyl-β-D-thio-galactoside for 18 h at 24°C, production yield further increased by about 9% (25.4 mg/L), compared to the highest expression setting. Flow cytometry and enzyme-linked immunosorbent assay result indicated improved protein binding in optimized conditions. Overall, our findings provide a basis for further investigations on economical production of recombinant nanobodies to improve production yield and activity.

  7. Identification of strategy parameters for particle swarm optimizer through Taguchi method

    Institute of Scientific and Technical Information of China (English)

    KHOSLA Arun; KUMAR Shakti; AGGARWAL K.K.

    2006-01-01

    Particle swarm optimization (PSO), like other evolutionary algorithms is a population-based stochastic algorithm inspired from the metaphor of social interaction in birds, insects, wasps, etc. It has been used for finding promising solutions in complex search space through the interaction of particles in a swarm. It is a well recognized fact that the performance of evolutionary algorithms to a great extent depends on the choice of appropriate strategy/operating parameters like population size,crossover rate, mutation rate, crossover operator, etc. Generally, these parameters are selected through hit and trial process, which is very unsystematic and requires rigorous experimentation. This paper proposes a systematic based on Taguchi method reasoning scheme for rapidly identifying the strategy parameters for the PSO algorithm. The Taguchi method is a robust design approach using fractional factorial design to study a large number of parameters with small number of experiments. Computer simulations have been performed on two benchmark functions-Rosenbrock function and Griewank function-to validate the approach.

  8. An Efficient Taguchi Approach for the Performance Optimization of Health, Safety, Environment and Ergonomics in Generation Companies.

    Science.gov (United States)

    Azadeh, Ali; Sheikhalishahi, Mohammad

    2015-06-01

    A unique framework for performance optimization of generation companies (GENCOs) based on health, safety, environment, and ergonomics (HSEE) indicators is presented. To rank this sector of industry, the combination of data envelopment analysis (DEA), principal component analysis (PCA), and Taguchi are used for all branches of GENCOs. These methods are applied in an integrated manner to measure the performance of GENCO. The preferred model between DEA, PCA, and Taguchi is selected based on sensitivity analysis and maximum correlation between rankings. To achieve the stated objectives, noise is introduced into input data. The results show that Taguchi outperforms other methods. Moreover, a comprehensive experiment is carried out to identify the most influential factor for ranking GENCOs. The approach developed in this study could be used for continuous assessment and improvement of GENCO's performance in supplying energy with respect to HSEE factors. The results of such studies would help managers to have better understanding of weak and strong points in terms of HSEE factors.

  9. Hybrid Taguchi DNA Swarm Intelligence for Optimal Inverse Kinematics Redundancy Resolution of Six-DOF Humanoid Robot Arms

    Directory of Open Access Journals (Sweden)

    Hsu-Chih Huang

    2014-01-01

    Full Text Available This paper presents a hybrid Taguchi deoxyribonucleic acid (DNA swarm intelligence for solving the inverse kinematics redundancy problem of six degree-of-freedom (DOF humanoid robot arms. The inverse kinematics problem of the multi-DOF humanoid robot arm is redundant and has no general closed-form solutions or analytical solutions. The optimal joint configurations are obtained by minimizing the predefined performance index in DNA algorithm for real-world humanoid robotics application. The Taguchi method is employed to determine the DNA parameters to search for the joint solutions of the six-DOF robot arms more efficiently. This approach circumvents the disadvantage of time-consuming tuning procedure in conventional DNA computing. Simulation results are conducted to illustrate the effectiveness and merit of the proposed methods. This Taguchi-based DNA (TDNA solver outperforms the conventional solvers, such as geometric solver, Jacobian-based solver, genetic algorithm (GA solver and ant, colony optimization (ACO solver.

  10. Application of Taguchi methods to dual mixture ratio propulsion system optimization for SSTO vehicles

    Science.gov (United States)

    Stanley, Douglas O.; Unal, Resit; Joyner, C. R.

    1992-01-01

    The application of advanced technologies to future launch vehicle designs would allow the introduction of a rocket-powered, single-stage-to-orbit (SSTO) launch system early in the next century. For a selected SSTO concept, a dual mixture ratio, staged combustion cycle engine that employs a number of innovative technologies was selected as the baseline propulsion system. A series of parametric trade studies are presented to optimize both a dual mixture ratio engine and a single mixture ratio engine of similar design and technology level. The effect of varying lift-off thrust-to-weight ratio, engine mode transition Mach number, mixture ratios, area ratios, and chamber pressure values on overall vehicle weight is examined. The sensitivity of the advanced SSTO vehicle to variations in each of these parameters is presented, taking into account the interaction of each of the parameters with each other. This parametric optimization and sensitivity study employs a Taguchi design method. The Taguchi method is an efficient approach for determining near-optimum design parameters using orthogonal matrices from design of experiments (DOE) theory. Using orthogonal matrices significantly reduces the number of experimental configurations to be studied. The effectiveness and limitations of the Taguchi method for propulsion/vehicle optimization studies as compared to traditional single-variable parametric trade studies is also discussed.

  11. Statistical analysis of sonochemical synthesis of SAPO-34 nanocrystals using Taguchi experimental design

    International Nuclear Information System (INIS)

    Askari, Sima; Halladj, Rouein; Nazari, Mahdi

    2013-01-01

    Highlights: ► Sonochemical synthesis of SAPO-34 nanocrystals. ► Using Taguchi experimental design (L9) for optimizing the experimental procedure. ► The significant effects of all the ultrasonic parameters on the response. - Abstract: SAPO-34 nanocrystals with high crystallinity were synthesized by means of sonochemical method. An L9 orthogonal array of the Taguchi method was implemented to investigate the effects of sonication conditions on the preparation of SAPO-34 with respect to crystallinity of the final product phase. The experimental data establish the favorable phase crystallinity which is improved by increasing the ultrasonic power and the sonication temperature. In the case of ultrasonic irradiation time, however, an initial increases in crystallinity from 5 min to 15 min is followed by a decrease in crystallinity for longer sonication time

  12. An optimization of superhydrophobic polyvinylidene fluoride/zinc oxide materials using Taguchi method

    Energy Technology Data Exchange (ETDEWEB)

    Mohamed, Adel M.A., E-mail: madel@uqac.ca [Department of Metallurgical and Materials Engineering, Faculty of Petroleum and Mining Engineering, Suez Canal University, Box 43721, Suez (Egypt); Industrial Chair on Atmospheric Icing of Power Network Equipment (CIGELE) and Canada Research Chair on Atmospheric Icing Engineering of Power Networks (INGIVRE) at Université du Québec a Chicoutimi, Québec (Canada); Jafari, Reza; Farzaneh, Masoud [Industrial Chair on Atmospheric Icing of Power Network Equipment (CIGELE) and Canada Research Chair on Atmospheric Icing Engineering of Power Networks (INGIVRE) at Université du Québec a Chicoutimi, Québec (Canada)

    2014-01-01

    This article is focused on the preparation and characterization of PVDF/ZnO composite materials. The superhydrophobic surface was prepared through spray coating of a mixture of PVDF polymer and ZnO nanoparticles on aluminum substrate. Stearic acid was added to improve the dispersion of ZnO. Taguchi's design of experiment method using MINITAB15 was used to rank several factors that may affect the superhydrophobic properties in order to formulate the optimum conditions. The Taguchi orthogonal array L9 was applied with three level of consideration for each factor. ANOVA were carried out to identify the significant factors that affect the water contact angle. Confirmation tests were performed on the predicted optimum process parameters. The crystallinity and morphology of PVDF–ZnO membranes were determined by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The results of Taguchi method indicate that the ZnO and stearic acid contents were the parameters making significant contribution toward improvement in hydrophobicity of PVDF materials. As the content of ZnO nanoparticles increased, the values of water contact angle increased, ranging from 122° to 159°, while the contact angle hysteresis and sliding angle decreased to 3.5° and 2.5°, respectively. The SEM results show that hierarchical micro-nanostructure of ZnO plays an important role in the formation of the superhydrophobic surface. FTIR results showed that, in the absence or present ZnO nanoparticles, the crystallization of the PVDF occurred predominantly in the β-phase.

  13. Multi-response optimization of process parameters in friction stir welded AM20 magnesium alloy by Taguchi grey relational analysis

    Directory of Open Access Journals (Sweden)

    Prakash Kumar Sahu

    2015-03-01

    Full Text Available The purpose of this paper is to optimize the process parameter to get the better mechanical properties of friction stir welded AM20 magnesium alloy using Taguchi Grey relational analysis (GRA. The considered process parameters are welding speed, tool rotation speed, shoulder diameter and plunging depth. The experiments were carried out by using Taguchi's L18 factorial design of experiment. The processes parameters were optimized and ranked the parameters based on the GRA. The percentage influence of each process parameter on the weld quality was also quantified. A validation experimental run was conducted using optimal process condition, which was obtained from the analysis, to show the improvement in mechanical properties of the joint. This study also shows the feasibility of the GRA with Taguchi technique for improvement in welding quality of magnesium alloy.

  14. From the Editor

    OpenAIRE

    Ugur Demiray

    2009-01-01

    Greetings Dear readers of TOJDE,TOJDE is appeared on your screen now as Volume 10, Number: 2. This is the second issue of the year 2009 and 10th anniversary of TOJDE. In this issue it is published four notes for Editor, 13 articles, 2 reviews. And this time, 28 authors from 8 different countries are placed. These published articles are from Canada, Gana, India, Iran, Malaysia, Pakistan, United Kingdom and Turkey. “Reflective Approach In Teaching Pre-Degree Chemistry” has sent to editor of TOJ...

  15. From the Editor

    OpenAIRE

    Ugur Demiray

    2011-01-01

    Dear readers of TOJDE,TOJDE appears on your screen now as Volume 12, Number: 4. In this issue it publishes 5 notes for Editor, 10 articles, 2 book reviews. And this time, 33 authors from 10 different countries are placed. These published articles are from Bangladesh, Ethiopia, India, Malaysia, Nigeria, Pakistan, Saudi Arabia, Turkey, UAE and USA. The first Notes for editor arrived from USA, written by Kevin YEE and Jace HARGIS. They focused on Google+ is like Twitter in that anyone can follo...

  16. From the Editor

    OpenAIRE

    Ugur Demiray

    2012-01-01

    Greetings Dear readers of TOJDE,TOJDE is appeared on your screen now as Volume 13 Number: 1 In this issue it is published 5 notes for Editor, 16articles, 2 books reviews a nd this time, 53 authors from 12 different countries are placed. These published articles are from Azerbaijan, Bangladesh, Greece, Iran, Malaysia, Morocco, Nigeria, Pakistan, Turkey, UAE and USA.The first Notes for editor arrived from USA, written by Kevin YEE and Jace HARGIS. They focused on Simply including a narrative co...

  17. EDITORIAL: Message from the Editor Message from the Editor

    Science.gov (United States)

    Thomas, Paul

    2010-02-01

    November 2009 and provided particularly detailed advice to the authors. The other three have been very helpful in 'minority fields'. We have excluded our Board members, Guest Editors of special editions and those referees who were already listed in the last four years. Guest Editors' work on papers submitted to their Special Issues is also excluded from consideration. The following people have been selected: Tomonori Takizuka, JAEA-Naka Fusion Institute, Japan Rudolf Neu, Max-Planck-Institut für Plasmaphysik, Germany Sibylle Guenter, Max-Planck-Institut für Plasmaphysik, Germany Taik-Soo Hahm, Princeton Plasma Physics Laboratory, United States David R. Mikkelsen, Princeton Plasma Physics Laboratory, United States Peter C. de Vries, EURATOM/UKAEA Fusion Association, United Kingdom Yasuhiro Suzuki, National Institute for Fusion Science, Japan Jerzy Wolowski, Institute of Plasma Physics and Laser Microfusion, Poland Tetsuo Tanabe, Kyushu University, Japan Yasuyuki Yagi, National Institute of Advanced Industrial Science and Technology, Japan Congratulations and many, many thanks! The Guest Editors of special editions deserve a special mention for the excellent help that they have given us. They are: Taik-Soo Hahm, Princeton Plasma Physics Laboratory, United States, Special Issue on H-Mode Physics and Transport Barriers Yaroslav Kolesnichenko, Institute for Nuclear Research, Ukraine, Special Issue on Energetic Particles in Magnetic Confinement Systems Kimitaka Itoh, National Institute for Fusion Science, Japan and Howard R. Wilson, University of York, UK, Special Issue on Plasma Instabilities Bernhard Unterberg, Forschungszentrum Juelich, Germany, Special Issue on Stochastic Fusion Plasma In addition, there is a group of several hundred referees who have helped us in the past year to maintain the high scientific standard of Nuclear Fusion. At the end of this issue we give the full list of all referees for 2009. Our thanks to them! Authors The winner of the 2009 Nuclear Fusion

  18. New Editors Appointed for Water Resources Research

    Science.gov (United States)

    2009-03-01

    Praveen Kumar (University of Illinois at Urbana-Champaign), the newly appointed editor in chief of Water Resources Research (WRR), heads the new team of editors for the journal. The other editors are Tom Torgersen (University of Connecticut, Groton), who continues his editorship; Tissa Illangasekare (Colorado School of Mines, Golden); Graham Sander (Loughborough University, Loughborough, UK); and John Selker (Oregon State University, Corvallis). Hoshin Gupta (University of Arizona, Tucson) will join WRR at the end of 2009. The new editors will begin receiving submissions immediately. The incoming editorial board thanks outgoing editors Marc Parlange, Brian Berkowitz, Amilcare Porporato, and Scott Tyler, all of whom will assist during the transition.

  19. Learning the vi and Vim Editor

    CERN Document Server

    Robbins, Arnold; Hannah, Elbert

    2008-01-01

    There's nothing that hard-core Unix and Linux users are more fanatical about than their text editor. Editors are the subject of adoration and worship, or of scorn and ridicule, depending upon whether the topic of discussion is your editor or someone else's. vi has been the standard editor for close to 30 years. Popular on Unix and Linux, it has a growing following on Windows systems, too. Most experienced system administrators cite vi as their tool of choice. And since 1986, this book has been the guide for vi. However, Unix systems are not what they were 30 years ago, and neither is this

  20. Optimal design of an IPM motor using Taguchi and Rosenbrock's methods

    International Nuclear Information System (INIS)

    Hwang, C C; Li, P L; Chang, C M; Liu, C T

    2011-01-01

    Techniques for the design optimization for cogging torque minimization and average torque maximization of a high-speed 2-pole interior permanent magnet (IPM) synchronous motor are presented. It is shown by the finite element method (FEM) and measurement, that combined the Taguchi and Rosenbrock's methods is a very efficient and effective approach in robust design a high performance motor.

  1. Optimization of cooling tower performance analysis using Taguchi method

    OpenAIRE

    Ramkumar Ramakrishnan; Ragupathy Arumugam

    2013-01-01

    This study discuss the application of Taguchi method in assessing maximum cooling tower effectiveness for the counter flow cooling tower using expanded wire mesh packing. The experiments were planned based on Taguchi’s L27 orthogonal array .The trail was performed under different inlet conditions of flow rate of water, air and water temperature. Signal-to-noise ratio (S/N) analysis, analysis of variance (ANOVA) and regression were carried out in order to determine the effects of process...

  2. Parametric study on design fractors for the SCS heat exchanger using the Taguchi method

    International Nuclear Information System (INIS)

    Kim, S. H.; Choi, B. S.; Yoon, J. H.; Jang, M. H.

    2002-01-01

    Using Taguchi method, design factors, i.e. control factors of the shutdown cooling heat exchanger were investigated to qualify the effect for the time elapsed after the beginning of the system operation. Levels of the control factors were selected from calculations based on the effectiveness-NTU method. From 18 simulations with the KDESCENT program, it was found that the performance of the system is greatly influenced by inlet temperature from the component cooling water at the shell side and mass flow rate of the reactor coolant at the tube side. The Taguchi method makes it possible to select the control factor that has to be controlled and designed with caution. The method gives the effective way to estimate the influence of each control factor to the system performance

  3. Taguchi optimization: Case study of gold recovery from amalgamation tailing by using froth flotation method

    Science.gov (United States)

    Sudibyo, Aji, B. B.; Sumardi, S.; Mufakir, F. R.; Junaidi, A.; Nurjaman, F.; Karna, Aziza, Aulia

    2017-01-01

    Gold amalgamation process was widely used to treat gold ore. This process produces the tailing or amalgamation solid waste, which still contains gold at 8-9 ppm. Froth flotation is one of the promising methods to beneficiate gold from this tailing. However, this process requires optimal conditions which depends on the type of raw material. In this study, Taguchi method was used to optimize the optimum conditions of the froth flotation process. The Taguchi optimization shows that the gold recovery was strongly influenced by the particle size which is the best particle size at 150 mesh followed by the Potassium amyl xanthate concentration, pH and pine oil concentration at 1133.98, 4535.92 and 68.04 gr/ton amalgamation tailing, respectively.

  4. Experimental investigation and optimization of welding process parameters for various steel grades using NN tool and Taguchi method

    Science.gov (United States)

    Soni, Sourabh Kumar; Thomas, Benedict

    2018-04-01

    The term "weldability" has been used to describe a wide variety of characteristics when a material is subjected to welding. In our analysis we perform experimental investigation to estimate the tensile strength of welded joint strength and then optimization of welding process parameters by using taguchi method and Artificial Neural Network (ANN) tool in MINITAB and MATLAB software respectively. The study reveals the influence on weldability of steel by varying composition of steel by mechanical characterization. At first we prepare the samples of different grades of steel (EN8, EN 19, EN 24). The samples were welded together by metal inert gas welding process and then tensile testing on Universal testing machine (UTM) was conducted for the same to evaluate the tensile strength of the welded steel specimens. Further comparative study was performed to find the effects of welding parameter on quality of weld strength by employing Taguchi method and Neural Network tool. Finally we concluded that taguchi method and Neural Network Tool is much efficient technique for optimization.

  5. Absolute variation of the mechanical characteristics of halloysite reinforced polyurethane nanocomposites complemented by Taguchi and ANOVA approaches

    Directory of Open Access Journals (Sweden)

    Tayser Sumer Gaaz

    Full Text Available The variation of the results of the mechanical properties of halloysite nanotubes (HNTs reinforced thermoplastic polyurethane (TPU at different HNTs loadings was implemented as a tool for analysis. The preparation of HNTs-TPU nanocomposites was performed under four controlled parameters of mixing temperature, mixing speed, mixing time, and HNTs loading at three levels each to satisfy Taguchi method orthogonal array L9 aiming to optimize these parameters for the best measurements of tensile strength, Young’s modulus, and tensile strain (known as responses. The maximum variation of the experimental results for each response was determined and analysed based on the optimized results predicted by Taguchi method and ANOVA. It was found that the maximum absolute variations of the three mentioned responses are 69%, 352%, and 126%, respectively. The analysis has shown that the preparation of the optimized tensile strength requires 1 wt.% HNTs loading (excluding 2 wt.% and 3 wt.%, mixing temperature of 190 °C (excluding 200 °C and 210 °C, and mixing speed of 30 rpm (excluding 40 rpm and 50 rpm. In addition, the analysis has determined that the mixing time at 20 min has no effect on the preparation. The mentioned analysis was fortified by ANOVA, images of FESEM, and DSC results. Seemingly, the agglomeration and distribution of HNTs in the nanocomposite play an important role in the process. The outcome of the analysis could be considered as a very important step towards the reliability of Taguchi method. Keywords: Nanocomposite, Design-of-experiment, Taguchi optimization method, Mechanical properties

  6. Optimization of the Electrocoagulation Process for Removal of Cr(VI Using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Masoud Asadi Habib

    2012-01-01

    Full Text Available The aim of this study was to optimize electrocoagulation process for removal of chromium (VI using Taguchi method. An elecrtrocoagulation reactor with six parallel electrodes was used in this study. For this purpose, effects of 7 parameters such as electrode material, electric current, time of reactions, initial pH, initial voltage, initial chromium concentration and rpm of impeller (agitation intensity in two different levels were studied. Model of "OA_32" of Taguchi experimental design method was used. Among the above-mentioned parameters, electric current and electrode material had highest effects and rpm of impeller had the lowest effect on the electrocoagulation performance. According to the obtained results, highest chromium removal (168.33 mg/L observed in the following conditions: electric current=3A, time of reaction=20min, initial pH=4, initial voltage=6v, initial chromium concentration=400mg/L, rpm of impeller=0rpm and iron as electrode material

  7. SVM-RFE based feature selection and Taguchi parameters optimization for multiclass SVM classifier.

    Science.gov (United States)

    Huang, Mei-Ling; Hung, Yung-Hsiang; Lee, W M; Li, R K; Jiang, Bo-Ru

    2014-01-01

    Recently, support vector machine (SVM) has excellent performance on classification and prediction and is widely used on disease diagnosis or medical assistance. However, SVM only functions well on two-group classification problems. This study combines feature selection and SVM recursive feature elimination (SVM-RFE) to investigate the classification accuracy of multiclass problems for Dermatology and Zoo databases. Dermatology dataset contains 33 feature variables, 1 class variable, and 366 testing instances; and the Zoo dataset contains 16 feature variables, 1 class variable, and 101 testing instances. The feature variables in the two datasets were sorted in descending order by explanatory power, and different feature sets were selected by SVM-RFE to explore classification accuracy. Meanwhile, Taguchi method was jointly combined with SVM classifier in order to optimize parameters C and γ to increase classification accuracy for multiclass classification. The experimental results show that the classification accuracy can be more than 95% after SVM-RFE feature selection and Taguchi parameter optimization for Dermatology and Zoo databases.

  8. Letter from the New Editor-in-Chief

    Directory of Open Access Journals (Sweden)

    Pabulo Henrique Rampelotto

    2014-01-01

    Full Text Available It is my great pleasure to serve as the new Editor-in-Chief of Life, a journal concerned with fundamental questions on the origins and nature of life, evolution of biosystems and astrobiology. With my experience as Executive Editor, Senior Editor and Guest Editor of so many successful special issues (some of them in MDPI journals [1–6], I am committed to making the journal a success, with the launch of exciting special issues, publication of high quality papers, as well as inclusion of the journal in major indexing and abstracting services. In this editorial, I present my view and plans for the journal.

  9. A new record editor for Invenio 3

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    On this presentation, a new record editor will be presented. Current version under development can be found in https://github.com/inveniosoftware-contrib/ng2-json-editor. This editor uses JSON as its native data format, provides many configuration options and can handle very large JSON documents. An update on the development status and pointers to how to use it in your own installation will be provided.

  10. A Microsoft Windows version of the MCNP visual editor

    International Nuclear Information System (INIS)

    Schwarz, R.A.; Carter, L.L.; Pfohl, J.

    1999-01-01

    Work has started on a Microsoft Windows version of the MCNP visual editor. The MCNP visual editor provides a graphical user interface for displaying and creating MCNP geometries. The visual editor is currently available from the Radiation Safety Information Computational Center (RSICC) and the Nuclear Energy Agency (NEA) as software package PSR-358. It currently runs on the major UNIX platforms (IBM, SGI, HP, SUN) and Linux. Work has started on converting the visual editor to work in a Microsoft Windows environment. This initial work focuses on converting the display capabilities of the visual editor; the geometry creation capability of the visual editor may be included in future upgrades

  11. Proxima: a presentation-oriented editor for structured documents

    NARCIS (Netherlands)

    Schrage, M.M.

    2004-01-01

    A typical computer user deals with a large variety of documents, such as text files, spreadsheets, and web pages. The applications for constructing and modifying these documents are called editors (e.g. text editors, spreadsheet applications, and HTML editors). Despite the apparent differences

  12. Proxima: a presentation-oriented editor for structured documents

    OpenAIRE

    Schrage, M.M.

    2004-01-01

    A typical computer user deals with a large variety of documents, such as text files, spreadsheets, and web pages. The applications for constructing and modifying these documents are called editors (e.g. text editors, spreadsheet applications, and HTML editors). Despite the apparent differences between editors, the core editing behavior, whether performed in a word-processor or a spreadsheet, is largely similar: document fragments may be copied and pasted, and new parts of the document may be ...

  13. JSME: a free molecule editor in JavaScript.

    Science.gov (United States)

    Bienfait, Bruno; Ertl, Peter

    2013-01-01

    A molecule editor, i.e. a program facilitating graphical input and interactive editing of molecules, is an indispensable part of every cheminformatics or molecular processing system. Today, when a web browser has become the universal scientific user interface, a tool to edit molecules directly within the web browser is essential. One of the most popular tools for molecular structure input on the web is the JME applet. Since its release nearly 15 years ago, however the web environment has changed and Java applets are facing increasing implementation hurdles due to their maintenance and support requirements, as well as security issues. This prompted us to update the JME editor and port it to a modern Internet programming language - JavaScript. The actual molecule editing Java code of the JME editor was translated into JavaScript with help of the Google Web Toolkit compiler and a custom library that emulates a subset of the GUI features of the Java runtime environment. In this process, the editor was enhanced by additional functionalities including a substituent menu, copy/paste, drag and drop and undo/redo capabilities and an integrated help. In addition to desktop computers, the editor supports molecule editing on touch devices, including iPhone, iPad and Android phones and tablets. In analogy to JME the new editor is named JSME. This new molecule editor is compact, easy to use and easy to incorporate into web pages. A free molecule editor written in JavaScript was developed and is released under the terms of permissive BSD license. The editor is compatible with JME, has practically the same user interface as well as the web application programming interface. The JSME editor is available for download from the project web page http://peter-ertl.com/jsme/

  14. Modelling the Cast Component Weight in Hot Chamber Die Casting using Combined Taguchi and Buckingham's π Approach

    Science.gov (United States)

    Singh, Rupinder

    2018-02-01

    Hot chamber (HC) die casting process is one of the most widely used commercial processes for the casting of low temperature metals and alloys. This process gives near-net shape product with high dimensional accuracy. However in actual field environment the best settings of input parameters is often conflicting as the shape and size of the casting changes and one have to trade off among various output parameters like hardness, dimensional accuracy, casting defects, microstructure etc. So for online inspection of the cast components properties (without affecting the production line) the weight measurement has been established as one of the cost effective method (as the difference in weight of sound and unsound casting reflects the possible casting defects) in field environment. In the present work at first stage the effect of three input process parameters (namely: pressure at 2nd phase in HC die casting; metal pouring temperature and die opening time) has been studied for optimizing the cast component weight `W' as output parameter in form of macro model based upon Taguchi L9 OA. After this Buckingham's π approach has been applied on Taguchi based macro model for the development of micro model. This study highlights the Taguchi-Buckingham based combined approach as a case study (for conversion of macro model into micro model) by identification of optimum levels of input parameters (based on Taguchi approach) and development of mathematical model (based on Buckingham's π approach). Finally developed mathematical model can be used for predicting W in HC die casting process with more flexibility. The results of study highlights second degree polynomial equation for predicting cast component weight in HC die casting and suggest that pressure at 2nd stage is one of the most contributing factors for controlling the casting defect/weight of casting.

  15. A Comparative Analysis of Taguchi Methodology and Shainin System DoE in the Optimization of Injection Molding Process Parameters

    Science.gov (United States)

    Khavekar, Rajendra; Vasudevan, Hari, Dr.; Modi, Bhavik

    2017-08-01

    Two well-known Design of Experiments (DoE) methodologies, such as Taguchi Methods (TM) and Shainin Systems (SS) are compared and analyzed in this study through their implementation in a plastic injection molding unit. Experiments were performed at a perfume bottle cap manufacturing company (made by acrylic material) using TM and SS to find out the root cause of defects and to optimize the process parameters for minimum rejection. Experiments obtained the rejection rate to be 8.57% from 40% (appx.) during trial runs, which is quiet low, representing successful implementation of these DoE methods. The comparison showed that both methodologies gave same set of variables as critical for defect reduction, but with change in their significance order. Also, Taguchi methods require more number of experiments and consume more time compared to the Shainin System. Shainin system is less complicated and is easy to implement, whereas Taguchi methods is statistically more reliable for optimization of process parameters. Finally, experimentations implied that DoE methods are strong and reliable in implementation, as organizations attempt to improve the quality through optimization.

  16. Multi-Responses Optimization Of Edm Sinking Process Of Aisi D2 Tool Steel Using Taguchi Grey–Fuzzy Method

    Directory of Open Access Journals (Sweden)

    Bobby Oedy Pramoedyo Soepangkat

    2014-12-01

    Full Text Available Rough machining with Electro Discharge Machining (EDM process gives a large Material Removal Rate (MRR and high Surface Roughness (SR, while finish machining gives low SR and very slow MRR. In this study, Taguchi method coupled with Grey Relational Analysis (GRA and fuzzy logic has been applied for optimization of multiple performance characteristics. The EDM machining parameters (gap voltage, pulse current, on time and duty factor are optimized with considerations of multiple performance characteristics, i.e., MRR and SR. The quality characteristic of MRR is larger-is-better, while the quality characteristic of SR is smaller-is-better. Based on Taguchi method, an L18 mixed-orthogonal array is selected for the experiments. By using the combination of GRA and fuzzy logic, the optimization of complicated multiple performance characteristics was transformed into the optimization of a single response performance index. The most significant machining parameters which affect the multiple performance characteristics were gapvoltage and pulse current. Experimental results have also shown that machining performance characteristics of EDM process can be improved effectively through the combination of Taguchi method, GRA and fuzzy logic.

  17. A feasibility investigation for modeling and optimization of temperature in bone drilling using fuzzy logic and Taguchi optimization methodology.

    Science.gov (United States)

    Pandey, Rupesh Kumar; Panda, Sudhansu Sekhar

    2014-11-01

    Drilling of bone is a common procedure in orthopedic surgery to produce hole for screw insertion to fixate the fracture devices and implants. The increase in temperature during such a procedure increases the chances of thermal invasion of bone which can cause thermal osteonecrosis resulting in the increase of healing time or reduction in the stability and strength of the fixation. Therefore, drilling of bone with minimum temperature is a major challenge for orthopedic fracture treatment. This investigation discusses the use of fuzzy logic and Taguchi methodology for predicting and minimizing the temperature produced during bone drilling. The drilling experiments have been conducted on bovine bone using Taguchi's L25 experimental design. A fuzzy model is developed for predicting the temperature during orthopedic drilling as a function of the drilling process parameters (point angle, helix angle, feed rate and cutting speed). Optimum bone drilling process parameters for minimizing the temperature are determined using Taguchi method. The effect of individual cutting parameters on the temperature produced is evaluated using analysis of variance. The fuzzy model using triangular and trapezoidal membership predicts the temperature within a maximum error of ±7%. Taguchi analysis of the obtained results determined the optimal drilling conditions for minimizing the temperature as A3B5C1.The developed system will simplify the tedious task of modeling and determination of the optimal process parameters to minimize the bone drilling temperature. It will reduce the risk of thermal osteonecrosis and can be very effective for the online condition monitoring of the process. © IMechE 2014.

  18. Web-Based Media Contents Editor for UCC Websites

    Science.gov (United States)

    Kim, Seoksoo

    The purpose of this research is to "design web-based media contents editor for establishing UCC(User Created Contents)-based websites." The web-based editor features user-oriented interfaces and increased convenience, significantly different from previous off-line editors. It allows users to edit media contents online and can be effectively used for online promotion activities of enterprises and organizations. In addition to development of the editor, the research aims to support the entry of enterprises and public agencies to the online market by combining the technology with various UCC items.

  19. Application of Taguchi methodology to improve the functional quality of a mechanical device

    International Nuclear Information System (INIS)

    Regeai, Awatef Omar

    2005-01-01

    Manufacturing and quality control are recognized branches of engineering management. special attention has been made to improve thr tools and methods for the purpose of improving the products quality and finding solutions for any Obstacles and/or problems during the production process. Taguchi methodology is one of the most powerful techniques for improving product and manufacturing process quality at low cost. It is a strategical and practical method that aims to assist managers and industrial engineers to tackle manufacturing quality problems in a systematic and structured manner. The potential benefit of Taguchi methodology lies in its ease of use, its emphasis on reducing variability to give more economical products and hence the accessibility to the engineering fraternity for solving real life quality problems. This study applies Taguchi methodology to improve the functional quality of a local made chain gear by a purposed heat treatment process. The hardness of steel is generally a function not of its composition only, but rather of its heat treatment. The study investigates the effects of various heat treatment parameters, including ramp rate of heating, normalizing holding time, normalizing temperature, annealing holding time, annealing temperature, hardening holding time, hardening temperature, quenching media, tempering temperature and tempering holding time upon the hardness, which is a measure of resistance to plastic deformation. Both the analysis of means (ANOM) and Signal to Noise ratio (S/N) have been carried out for determining the optimal condition of the process. A significant improvement of the functional quality characteristic (hardness) by more than 32% was obtained. The Scanning Electron Microscopy technique was used in this study to obtain visual evidence of the quality and continuous improvement of the heat treated samples. (author)

  20. Application of Taguchi Design and Response Surface Methodology for Improving Conversion of Isoeugenol into Vanillin by Resting Cells of Psychrobacter sp. CSW4

    OpenAIRE

    Ashengroph, Morahem; Nahvi, Iraj; Amini, Jahanshir

    2013-01-01

    For all industrial processes, modelling, optimisation and control are the keys to enhance productivity and ensure product quality. In the current study, the optimization of process parameters for improving the conversion of isoeugenol to vanillin by Psychrobacter sp. CSW4 was investigated by means of Taguchi approach and Box-Behnken statistical design under resting cell conditions. Taguchi design was employed for screening the significant variables in the bioconversion medium. Sequentially, B...

  1. Factors Affecting the Quality of Concrete Containing Solar PV Cells through Taguchi Method

    Directory of Open Access Journals (Sweden)

    Cheng An

    2015-01-01

    Full Text Available In order to comply with the implementation of sustainable development, the construction industry through the use of less polluting green energy technology is already imminent and more had to do. Production of Portland cement consumes large amount of energy and releases lots of carbon dioxide, nevertheless, the developing of sustainable society means more urgent and important to search for new cementitious materials to replace Portland cement in future constructions. The research employs Taguchi method to identify the key factors influencing the performance of alkali activated silica fume concrete in which amorphous silicon solar cells are ground and added into the mixture. Taguchi method has made valuable contributions to statistics and engineering. It provides techniques for investigating variation in experiments, system, parameter and tolerance design, all of which have been influential in improving manufactured quality. The conclusions were made thru ANOVA and F-test based on the statistical analyses. Next, we expect the inconsistence observed in the study to be further resolved by Grey Relational Analysis which is a normalization evaluation technique to solve the complicated multi-performance characteristics optimization effectively.

  2. From the Editor

    Directory of Open Access Journals (Sweden)

    Ugur Demiray

    2004-04-01

    Full Text Available Turkish Online Journal of Distance Education-TOJDE April 2004 ISSN 1302-6488 Volume:5 Number:2 -------------------------------------------------------------------------------- From the Editor I am pleased to inform you that Vol.:5, Number:2 issue of The Turkish Online Journal of Distance Education-TOJDE has been issued on the web site http://tojde.anadolu.edu.tr now. TOJDE is meeting with its readers for the 14th time, since 2000 January.First of all I would like to inform you once more that Volume 5 Number:3 will publish as a special theme issue of TOJDE. This issue will be prepare by Patrick Alan DANAHER, Fons NOUWENS, from Learning, Evaluation, Innovation and Development (LEID Centre, within the Division of Teaching and Learning Services, at Central Queensland University (CQU in Australia and Zeynep ERDINC from Anadolu University as a guest co-editors. Call for papers for taht issue finished at 15th March. Now, the selected articles are in reviewing and evaluation phase in process. In this issue, has been given place to two note for editor, eight articles, three book reviews, 9 news, and as being before three links deal with Anadolu University take place in the literature and introducing a journal dealt with DE application. This issue's articles came from Canada, Greece, Turkey and USA (according to alphabetical order.

  3. 29 CFR 793.8 - “News editor.”

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false âNews editor.â 793.8 Section 793.8 Labor Regulations... INTERPRETATION NOT DIRECTLY RELATED TO REGULATIONS EXEMPTION OF CERTAIN RADIO AND TELEVISION STATION EMPLOYEES... Exemption § 793.8 “News editor.” A news editor is an employee who gathers, edits and rewrites the news. He...

  4. Editor's Note

    African Journals Online (AJOL)

    On another note: the editor and the editorial team acknowledge the financial support of the Carnegie Corporation of New York through the University of Ghana Building A New Generation of Academics in Africa (BANGA-Africa) Project. We also use this platform to express our gratitude for the support of various stakeholders, ...

  5. EDITORIAL: Greetings from the new Editor-in-Chief Greetings from the new Editor-in-Chief

    Science.gov (United States)

    Nielsch, Kornelius

    2012-01-01

    On 1 January 2012 I will be assuming the position of Editor-in-Chief of the journal Semiconductor Science and Technology (SST). I am flattered by the confidence expressed in my ability to carry out this challenging job and I will try hard to justify this confidence. The previous Editor-in-Chief, Laurens Molenkamp, University of Würzburg, Germany, has worked tirelessly for the last ten years and has done an excellent job for the journal. Everyone at the journal is profoundly grateful for his leadership and for his achievements In 2012 several new members will join the Editorial Board: Professor Deli Wang (University of California, San Diego) with considerable expertise in semiconductor nanowires, Professor Saskia Fischer (Humboldt University, Berlin, Germany) with a background in semiconductor quantum devices, and Professor Erwin Kessels (Eindhoven University of Technology, Netherlands) with extensive experience in plasma processing of thin films and gate oxides. In particular, I want to express my gratitude to Professor Israel Bar-Joseph (Weizmann Institute of Science, Israel) and Professor Maria Tamargo (The City College of New York, USA), who will leave next year and who have vigorously served the Editorial Board for years. The journal has recently introduced a fast-track option for manuscripts. This option is a high-quality, high-profile outlet for new and important research across all areas of semiconductor research. Authors can expect to receive referee reports in less than 20 days from submission. Once accepted, you can expect the articles to be online within two or three weeks from acceptance and to be published in print in less than a month. Furthermore, all fast-track communications published in 2011 will be free to read for ten years. More detailed information on fast-track publication can be found on the following webpage: http://iopscience.iop.org/0268-1242/page/Fast track communications It is encouraging to see that since the journal introduced pre

  6. Vertically aligned N-doped CNTs growth using Taguchi experimental design

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Ricardo M. [CICECO, Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro (Portugal); Fernandes, António J.S. [I3 N, Physics Department, University of Aveiro, 3810-193 Aveiro (Portugal); Ferro, Marta C. [CICECO, Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro (Portugal); Pinna, Nicola [Institut für Chemie, Humboldt-Universität zu Berlin, Brook-Taylor-Str. 2, 12489 Berlin Germany (Germany); Silva, Rui F., E-mail: rsilva@ua.pt [CICECO, Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro (Portugal)

    2015-07-30

    Highlights: • Taguchi method is employed for the CVD growth of vertically aligned N-doped CNTs. • Optimal growth parameters: NH3 = 90 sccm, T = 825 °C and catalyst pretreatment time = 2 min. • SEM and HRTEM revealed VACNTs with bamboo-like structure of curved graphitic layers. • XPS analysis results indicated 2.00 at.% of N incorporation in the VACNTs. - Abstract: The Taguchi method with a parameter design L{sub 9} orthogonal array was implemented for optimizing the nitrogen incorporation in the structure of vertically aligned N-doped CNTs grown by thermal chemical deposition (TCVD). The maximization of the I{sub D}/I{sub G} ratio of the Raman spectra was selected as the target value. As a result, the optimal deposition configuration was NH{sub 3} = 90 sccm, growth temperature = 825 °C and catalyst pretreatment time of 2 min, the first parameter having the main effect on nitrogen incorporation. A confirmation experiment with these values was performed, ratifying the predicted I{sub D}/I{sub G} ratio of 1.42. Scanning electron microscopy (SEM) characterization revealed a uniform completely vertically aligned array of multiwalled CNTs which individually exhibit a bamboo-like structure, consisting of periodically curved graphitic layers, as depicted by high resolution transmission electron microscopy (HRTEM). The X-ray photoelectron spectroscopy (XPS) results indicated a 2.00 at.% of N incorporation in the CNTs in pyridine-like and graphite-like, as the predominant species.

  7. Multi-response optimization of process parameters in biogas production from food waste using Taguchi – Grey relational analysis

    International Nuclear Information System (INIS)

    Deepanraj, B.; Sivasubramanian, V.; Jayaraj, S.

    2017-01-01

    Highlights: • Influence of process parameters on biogas production was experimentally investigated. • The optimum conditions were determined using Taguchi based Grey relational analysis. • Percentage contribution of chosen parameters were determined using ANOVA. • Empirical relationship between the input and output variables were derived. - Abstract: In the present study, the influence of process parameters and pretreatment on biogas production, volatile solid degradation and COD degradation during anaerobic digestion of food waste were experimentally investigated. Using Taguchi based Grey relational analysis, the optimum condition for anaerobic digestion was found. Taguchi technique was coupled with grey relational analysis to obtain a grey relational grade for evaluating multiple outputs. A L_1_6 orthogonal array was selected and designed for five parameters varied through four levels by applying Taguchi’s design of experiments. The optimum level values of parameters obtained for anaerobic digestion of food waste is solid concentration of 7.5% TS, pH of 7, temperature of 50 °C, C/N ratio of 20.19 and ultrasonication pretreatment. Percentage contribution of input parameters on output was determined using ANOVA. The results showed that pretreatment is the prominent parameter that contributes towards output responses followed by pH, solid concentration, temperature and C/N ratio.

  8. Optimizing Cu(II) removal from aqueous solution by magnetic nanoparticles immobilized on activated carbon using Taguchi method.

    Science.gov (United States)

    Ebrahimi Zarandi, Mohammad Javad; Sohrabi, Mahmoud Reza; Khosravi, Morteza; Mansouriieh, Nafiseh; Davallo, Mehran; Khosravan, Azita

    2016-01-01

    This study synthesized magnetic nanoparticles (Fe(3)O(4)) immobilized on activated carbon (AC) and used them as an effective adsorbent for Cu(II) removal from aqueous solution. The effect of three parameters, including the concentration of Cu(II), dosage of Fe(3)O(4)/AC magnetic nanocomposite and pH on the removal of Cu(II) using Fe(3)O(4)/AC nanocomposite were studied. In order to examine and describe the optimum condition for each of the mentioned parameters, Taguchi's optimization method was used in a batch system and L9 orthogonal array was used for the experimental design. The removal percentage (R%) of Cu(II) and uptake capacity (q) were transformed into an accurate signal-to-noise ratio (S/N) for a 'larger-the-better' response. Taguchi results, which were analyzed based on choosing the best run by examining the S/N, were statistically tested using analysis of variance; the tests showed that all the parameters' main effects were significant within a 95% confidence level. The best conditions for removal of Cu(II) were determined at pH of 7, nanocomposite dosage of 0.1 gL(-1) and initial Cu(II) concentration of 20 mg L(-1) at constant temperature of 25 °C. Generally, the results showed that the simple Taguchi's method is suitable to optimize the Cu(II) removal experiments.

  9. DOSSIER: Intelectuales y Editores

    Directory of Open Access Journals (Sweden)

    Gustavo Sorá

    2009-04-01

    Full Text Available El intelectual abre ideas, el editor las cierra. El escritor produce textos, el editor impresos. El intelectualescribe pero es el editor quien publica. No por nada, afirman algunos psicólogos, el pensamientoculmina con su publicación. Entre el escritor y el editor se moviliza una energía simbólica y socialsublimada bajo las líneas impresas que llegan al lector. Ese entre-lugar de producción de sentidos, decosmologías, de sociedad que marcó la formación de gran parte de las culturas desde la aparición de laexpresión gráfica de las ideas, permanece como un problema esquivo para la investigación, al menospara la antropología practicada en estas latitudes. Parece una cuestión obturada por el dominanteacúmulo de historias de las ideas, de la literatura, del pensamiento que reactualizan la oposición entreespíritu y materia, estética y sociedad, texto y contexto. Evidencia de ello es la clausura sufrida por lasociología de la literatura, una sub-disciplina tan incómoda para los guardianes del aura del genioliterario nacional.Este dossier busca iluminar esa relación con la certeza de que modela uno de los terrenos másfértiles para repensar el legado de la historia de la cultura en occidente y para generar un basto programade problemas de investigación escasamente explorados por las ciencias sociales y humanas en AméricaLatina, y aplicables al estudio de toda cultura, con o sin escritura.

  10. Supplier Selection for Food Industry: A Combination of Taguchi Loss Function and Fuzzy Analytical Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Renna Magdalena

    2012-09-01

    Full Text Available Supplier selection is an important part of supply chain management process by which firms identify, evaluate, and establish contracts with suppliers. Deciding the right supplier can be a complex task. As such, various criteria must be taken into account to choose the best supplier. This study focused on the supply in the packaging division of a food industry in Denpasar-Bali. A combination of Taguchi Loss Function and fuzzy-AHP (Analytical Hierarchy Process Fuzzy Linear Programming was used to determine the best supplier. In this analysis, several suppliers’ criteria were considered, namely quality, delivery, completeness, quality loss and environmental management. By maximizing the suppliers’ performances based on each criterion and aggregating the suppliers’ performances based on the overall criteria, the best supplier was determined. Keywords: supplier selection, taguchi loss function, AHP, fuzzy linear programming,environment

  11. New Editors Appointed for Sections of Journal of Geophysical Research

    Science.gov (United States)

    2009-04-01

    New editors have been appointed for the Atmospheres, Biogeosciences, and Oceans sections of the Journal of Geophysical Research (JGR). Joost de Gouw (NOAA, Boulder, Colo.) and Renyi Zhang (Texas A&M, College Station) are filling the vacancies of retiring Atmospheres section editors John Austin and Jose Fuentes. De Gouw and Zhang join the continuing editors Steven Ghan and Yinon Rudich. Sara Pryor (Indiana University, Bloomington) is joining the Atmospheres section editorial board as an associate editor now; she will transition to editor in January 2010.

  12. Reaction kinetics, reaction products and compressive strength of ternary activators activated slag designed by Taguchi method

    NARCIS (Netherlands)

    Yuan, B.; Yu, Q.L.; Brouwers, H.J.H.

    2015-01-01

    This study investigates the reaction kinetics, the reaction products and the compressive strength of slag activated by ternary activators, namely waterglass, sodium hydroxide and sodium carbonate. Nine mixtures are designed by the Taguchi method considering the factors of sodium carbonate content

  13. Study of Dimple Effect on the Friction Characteristics of a Journal Bearing using Taguchi Method

    Science.gov (United States)

    Murthy, A. Amar; Raghunandana, Dr.

    2018-02-01

    The effect of producing dimples using chemically etched techniques or by machining process on the surface of a journal bearing bushing to reduce the friction using Taguchi method is investigated. The data used in the present analysis is based on the results obtained by the series of experiments conducted to study the dimples effect on the Stribeck curve. It is statistically proved that producing dimples on the bushing surface of a journal bearing has significant effect on the friction coefficient when used with light oils. Also it is seen that there is an interaction effect between speeds-load and load-dimples. Hence the interaction effect, which are usually neglected should be considered during actual experiments that significantly contributes in reducing the friction in mixed lubrication regime. The experiments, if were conducted after Taguchi method, then the number of experiments would have been reduced to half of the actual set of experiments that were essentially conducted.

  14. Announcement: New Editor-In Robert C. Kennicutt

    Science.gov (United States)

    Abt, Helmut A.

    1999-06-01

    Effective 1999 July 1, all new manuscripts for Part 1 of The Astrophysical Journal and The Astrophysical Journal Supplement Series should be sent to Dr. Robert C. Kennicutt, Editor-in-Chief The Astrophysical Journal Steward Observatory University of Arizona Tucson, AZ 85721-0065 The other means of contact are telephone, (520) 621-5145 FAX, (520) 621-5153 and e-mail, apj@as.arizona.edu. For express packages please use the street address of 933 North Cherry Avenue. Dr. Kennicutt will be assisted by several of my loyal coworkers, who will move across the street. Manuscripts received before July 1 will be handled by the current editor until most of their problems have been resolved, at which point the remainder will be sent to Dr. Kennicutt's office. Manuscripts for the Letters should, as before, be sent directly to Dr. Alex Dalgarno at the Center for Astrophysics in Cambridge, MA. We are fortunate that a person with as much experience in research and proven good judgment as Dr. Kennicutt is willing to accept this difficult and time-consuming responsibility. He will be only the seventh Managing Editor or Editor-in-Chief that this Journal has had in its 104 years. Please give him the cooperation and help that you have given the current editor. It has been my privilege to work for 28 years with many of the best astrophysicists in the world and to publish their papers. This was done with the help of the AAS Publications Board and AAS officers, the efforts of Peter Boyce and Evan Owens who made the on-line edition of the Journal possible, three Associate Editors, a score of Scientific Editors, a hardworking staff of six in Tucson, up to 25 production controllers and manuscript editors at the University of Chicago Press, and the thousands of astronomers throughout the world who served as referees. The original masthead called this journal ``An International Review of Spectroscopy and Astronomical Physics.'' That subtitle is no longer appropriate because we do not publish

  15. Taguchi experimental design to determine the taste quality characteristic of candied carrot

    Science.gov (United States)

    Ekawati, Y.; Hapsari, A. A.

    2018-03-01

    Robust parameter design is used to design product that is robust to noise factors so the product’s performance fits the target and delivers a better quality. In the process of designing and developing the innovative product of candied carrot, robust parameter design is carried out using Taguchi Method. The method is used to determine an optimal quality design. The optimal quality design is based on the process and the composition of product ingredients that are in accordance with consumer needs and requirements. According to the identification of consumer needs from the previous research, quality dimensions that need to be assessed are the taste and texture of the product. The quality dimension assessed in this research is limited to the taste dimension. Organoleptic testing is used for this assessment, specifically hedonic testing that makes assessment based on consumer preferences. The data processing uses mean and signal to noise ratio calculation and optimal level setting to determine the optimal process/composition of product ingredients. The optimal value is analyzed using confirmation experiments to prove that proposed product match consumer needs and requirements. The result of this research is identification of factors that affect the product taste and the optimal quality of product according to Taguchi Method.

  16. Optimization of the Electrodeposition Parameters to Improve the Stoichiometry of In2S3 Films for Solar Applications Using the Taguchi Method

    Directory of Open Access Journals (Sweden)

    Maqsood Ali Mughal

    2014-01-01

    Full Text Available Properties of electrodeposited semiconductor thin films are dependent upon the electrolyte composition, plating time, and temperature as well as the current density and the nature of the substrate. In this study, the influence of the electrodeposition parameters such as deposition voltage, deposition time, composition of solution, and deposition temperature upon the properties of In2S3 films was analyzed by the Taguchi Method. According to Taguchi analysis, the interaction between deposition voltage and deposition time was significant. Deposition voltage had the largest impact upon the stoichiometry of In2S3 films and deposition temperature had the least impact. The stoichiometric ratios between sulfur and indium (S/In: 3/2 obtained from experiments performed with optimized electrodeposition parameters were in agreement with predicted values from the Taguchi Method. The experiments were carried out according to Taguchi orthogonal array L27 (3^4 design of experiments (DOE. Approximately 600 nm thick In2S3 films were electrodeposited from an organic bath (ethylene glycol-based containing indium chloride (InCl3, sodium chloride (NaCl, and sodium thiosulfate (Na2S2O3·5H2O, the latter used as an additional sulfur source along with elemental sulfur (S. An X-ray diffractometer (XRD, energy dispersive X-ray spectroscopy (EDS unit, and scanning electron microscope (SEM were, respectively, used to analyze the phases, elemental composition, and morphology of the electrodeposited In2S3 films.

  17. pedigreejs: a web-based graphical pedigree editor.

    Science.gov (United States)

    Carver, Tim; Cunningham, Alex P; Babb de Villiers, Chantal; Lee, Andrew; Hartley, Simon; Tischkowitz, Marc; Walter, Fiona M; Easton, Douglas F; Antoniou, Antonis C

    2018-03-15

    The collection, management and visualization of clinical pedigree (family history) data is a core activity in clinical genetics centres. However, clinical pedigree datasets can be difficult to manage, as they are time consuming to capture, and can be difficult to build, manipulate and visualize graphically. Several standalone graphical pedigree editors and drawing applications exist but there are no freely available lightweight graphical pedigree editors that can be easily configured and incorporated into web applications. We developed 'pedigreejs', an interactive graphical pedigree editor written in JavaScript, which uses standard pedigree nomenclature. Pedigreejs provides an easily configurable, extensible and lightweight pedigree editor. It makes use of an open-source Javascript library to define a hierarchical layout and to produce images in scalable vector graphics (SVG) format that can be viewed and edited in web browsers. The software is freely available under GPL licence (https://ccge-boadicea.github.io/pedigreejs/). tjc29@cam.ac.uk. Supplementary data are available at Bioinformatics online.

  18. Graphical Editor of the DDS Topology Configuration

    CERN Document Server

    Rusinov, Aleksandar

    2015-01-01

    An editor for the DDS topology configuration is created to allow the viewing of an existing topology, the editing of a topology, the creation of a new topology and the saving of a topology as a topology language XML file to be run directly on DDS or to be reloaded again for further editing. The development of the editor was started at GSI Darmstadt at the end of last year. The editor is designed as a web application that works on the client side. Recent and powerful JavaScript libraries were used – ReactJS and JointJS. It has two menus for editing – one for the declarative part and another for the executable part. A graph visualisation of the topology has also been developed and implemented fully to the editor. The output files have been tested and fully verified on the DDS. Future work will involve representation of the pipeline process and investigation on behavior when larger and more sophisticated topologies are used.

  19. Optimization of a Culture Medium Using the Taguchi Approach for the Production of Microorganisms Active in Odorous Compound Removal

    Directory of Open Access Journals (Sweden)

    Krzysztof Makowski

    2017-07-01

    Full Text Available The aim of this work was to develop the composition of a medium for the cultivation of six microbial strains forming a deodorizing consortium: Pseudomonas fluorescens, Enterococcus faecium, Bacillus subtilis, Bacillus megaterium, Leuconostoc mesenteroides and Lactobacillus plantarum. The study focused on the optimization of a highly efficient culture medium composed of readily available components of plant origin to maximize microbial biomass yields, and to create a less expensive alternative to the commercial Tryptic Soy Broth medium (TSB. After preliminary efficiency screening of all tested media components, we selected four substrates for further optimization—soy protein concentrate (SPC, glucose or sucrose, and phosphate salts. The final concentrations of all components were fine-tuned using the Taguchi design for experiments according to an L9 array. Taguchi optimization led to formulation of a culture medium, which was approximately 5 times cheaper than TSB (depending on the components used. Consequently, microbial biomass yields were improved by up to 15-fold (1564%, depending on the strain. The results obtained in the laboratory experiments were then confirmed in pilot- (42 L and industrial- (300 L scale fermentation. Our results show that this method of using a parallel culture microbioreactor with the Taguchi approach can be recommended for optimization of culture media based on substrates of plant origin.

  20. Absolute variation of the mechanical characteristics of halloysite reinforced polyurethane nanocomposites complemented by Taguchi and ANOVA approaches

    Science.gov (United States)

    Gaaz, Tayser Sumer; Sulong, Abu Bakar; Kadhum, Abdul Amir H.; Nassir, Mohamed H.; Al-Amiery, Ahmed A.

    The variation of the results of the mechanical properties of halloysite nanotubes (HNTs) reinforced thermoplastic polyurethane (TPU) at different HNTs loadings was implemented as a tool for analysis. The preparation of HNTs-TPU nanocomposites was performed under four controlled parameters of mixing temperature, mixing speed, mixing time, and HNTs loading at three levels each to satisfy Taguchi method orthogonal array L9 aiming to optimize these parameters for the best measurements of tensile strength, Young's modulus, and tensile strain (known as responses). The maximum variation of the experimental results for each response was determined and analysed based on the optimized results predicted by Taguchi method and ANOVA. It was found that the maximum absolute variations of the three mentioned responses are 69%, 352%, and 126%, respectively. The analysis has shown that the preparation of the optimized tensile strength requires 1 wt.% HNTs loading (excluding 2 wt.% and 3 wt.%), mixing temperature of 190 °C (excluding 200 °C and 210 °C), and mixing speed of 30 rpm (excluding 40 rpm and 50 rpm). In addition, the analysis has determined that the mixing time at 20 min has no effect on the preparation. The mentioned analysis was fortified by ANOVA, images of FESEM, and DSC results. Seemingly, the agglomeration and distribution of HNTs in the nanocomposite play an important role in the process. The outcome of the analysis could be considered as a very important step towards the reliability of Taguchi method.

  1. PROCESS PERFORMANCE EVALUATION USING HISTOGRAM AND TAGUCHI TECHNIQUE IN LOCK MANUFACTURING COMPANY

    Directory of Open Access Journals (Sweden)

    Hagos Berhane

    2013-12-01

    Full Text Available Process capability analysis is a vital part of an overall quality improvement program. It is a technique that has application in many segments of the product cycle, including product and process design, vendor sourcing, production or manufacturing planning, and manufacturing. Frequently, a process capability study involves observing a quality characteristic of the product. Since this information usually pertains to the product rather than the process, this analysis should strictly speaking be called a product analysis study. A true process capability study in this context would involve collecting data that relates to process parameters so that remedial actions can be identified on a timely basis. The present study attempts to analyze performance of drilling, pressing, and reaming operations carried out for the manufacturing of two major lock components viz. handle and lever plate, at Gaurav International, Aligarh (India. The data collected for depth of hole on handle, central hole diameter, and key hole diameter are used to construct histogram. Next, the information available in frequency distribution table, the process mean, process capability from calculations and specification limits provided by the manufacturing concern are used with Taguchi technique. The data obtained from histogram and Taguchi technique combined are used to evaluate the performance of the manufacturing process. Results of this study indicated that the performance of all the processes used to produce depth of hole on handle, key hole diameter, and central hole diameter are potentially incapable as the process capability indices are found to be 0.54, 0.54 and 0.76 respectively. The number of nonconforming parts expressed in terms of parts per million (ppm that have fallen out of the specification limits are found to be 140000, 26666.66, and 146666.66 for depth of hole on handle, central hole diameter, and key hole diameter respectively. As a result, the total loss incurred

  2. Weibull and lognormal Taguchi analysis using multiple linear regression

    International Nuclear Information System (INIS)

    Piña-Monarrez, Manuel R.; Ortiz-Yañez, Jesús F.

    2015-01-01

    The paper provides to reliability practitioners with a method (1) to estimate the robust Weibull family when the Taguchi method (TM) is applied, (2) to estimate the normal operational Weibull family in an accelerated life testing (ALT) analysis to give confidence to the extrapolation and (3) to perform the ANOVA analysis to both the robust and the normal operational Weibull family. On the other hand, because the Weibull distribution neither has the normal additive property nor has a direct relationship with the normal parameters (µ, σ), in this paper, the issues of estimating a Weibull family by using a design of experiment (DOE) are first addressed by using an L_9 (3"4) orthogonal array (OA) in both the TM and in the Weibull proportional hazard model approach (WPHM). Then, by using the Weibull/Gumbel and the lognormal/normal relationships and multiple linear regression, the direct relationships between the Weibull and the lifetime parameters are derived and used to formulate the proposed method. Moreover, since the derived direct relationships always hold, the method is generalized to the lognormal and ALT analysis. Finally, the method’s efficiency is shown through its application to the used OA and to a set of ALT data. - Highlights: • It gives the statistical relations and steps to use the Taguchi Method (TM) to analyze Weibull data. • It gives the steps to determine the unknown Weibull family to both the robust TM setting and the normal ALT level. • It gives a method to determine the expected lifetimes and to perform its ANOVA analysis in TM and ALT analysis. • It gives a method to give confidence to the extrapolation in an ALT analysis by using the Weibull family of the normal level.

  3. Towards the implementation of a system for manuscript editor certification

    Directory of Open Access Journals (Sweden)

    Hyun Jung Yi

    2016-02-01

    Full Text Available Style and format are important criteria for evaluating a journal and indexing it in major databases. In Korean science, technology, and medical journals, interest in manuscript editing has increased over the past seven to eight years, and the responsibilities of manuscript editors have expanded as well. However, since no clear standards for the roles and qualifications for manuscript editors are yet available, a formal certification system is needed to establish appropriate standards and to provide professional training. To identify ways of developing a manuscript editor certification program in Korea, this study investigated similar certification programs in and outside the country and surveyed 195 Korean editors, manuscript editors, publishers, and medical librarians. The survey revealed that manuscript editors were necessary (mean score of 4.38 on a five-point Likert scale, with a score of 5 indicating strong agreement, and that their main contributions were efficiently managing the editorial board, improving the accuracy of references, and accelerating the editing process. The respondents were also positive about the possibility of implementing a manuscript editor certification; 45.1% showed interest in becoming certified, and 47.1% reported interest in hiring a certified manuscript editor. Regarding the system for issuing certification, respondents favored a professional training course (53.1%, validation of work experience (27.1%, or an examination (16.8%. This study concludes that it is essential to establish a formal certification program to train manuscript editors properly, and an examination system is the most efficient and suitable method for managing the certification process.

  4. A comparative study on optimization of machining parameters by turning aerospace materials according to Taguchi method

    Directory of Open Access Journals (Sweden)

    Altin Abdullah

    2017-01-01

    Full Text Available The effects of cutting tool coating material and cutting speed on cutting forces and surface roughness were investigated by Taguchi experimental design. Main cutting force, Fz is considered as a criterion. The effects of machining parameters were investigated using Taguchi L18 orthogonal array. Optimal cutting conditions were determined using the signal-to-noise (S/N ratio which is calculated for average surface roughness and cutting force according to the “the smaller is better” approach. Using results of analysis of variance (ANOVA and signal-to-noise (S/N ratio, effects of parameters on both average surface roughness and cutting forces were statistically investigated. It was observed that feed rate and cutting speed had higher effect on cutting force in Hastelloy X, while the feed rate and cutting tool had higher effect on cutting force in Inconel 625. According to average surface roughness the cutting tool and feed rate had higher effect in Hastelloy X and Inconel 625.

  5. From the editors

    NARCIS (Netherlands)

    NN,

    2001-01-01

    Hofstadter’s Law: Things always take longer than you think, even when you take into account Hofstadter’s Law. [D. Hofstadter, Gödel, Escher, Bach: an eternal golden braid (1980) 152]. This certainly applies to the forthcoming issues of the Flora Malesiana. According to its editors the bottleneck

  6. An assessment of diagnostic efficiency by Taguchi/DEA methods.

    Science.gov (United States)

    Taner, Mehmet Tolga; Sezen, Bulent

    2009-01-01

    The aim of this paper is to propose a new, objective and consistent method for the calculation of the diagnostic efficiency in medical applications. In this study, a hybrid method of Taguchi and DEA is proposed. This method reflects the diversity of inputs and outputs by incorporating the stepwise application of sensitivity, specificity, leveling threshold, and efficiency score. A hypothetical case study is given which involves eight readers of X-ray films in clinical radiology. The selected pairs of sensitivity and specificity yielded two efficient readers. After super efficiency analysis, Reader 6 is found to be the most efficient reader. The paper presents a new, objective and consistent method for the calculation of the diagnostic efficiency in medical applications.

  7. Combustion characteristics and optimal factors determination with Taguchi method for diesel engines port-injecting hydrogen

    International Nuclear Information System (INIS)

    Wu, Horng-Wen; Wu, Zhan-Yi

    2012-01-01

    This study applies the L 9 orthogonal array of the Taguchi method to find out the best hydrogen injection timing, hydrogen-energy-share ratio, and the percentage of exhaust gas circulation (EGR) in a single DI diesel engine. The injection timing is controlled by an electronic control unit (ECU) and the quantity of hydrogen is controlled by hydrogen flow controller. For various engine loads, the authors determine the optimal operating factors for low BSFC (brake specific fuel consumption), NO X , and smoke. Moreover, net heat-release rate involving variable specific heat ratio is computed from the experimental in-cylinder pressure. In-cylinder pressure, net heat-release rate, A/F ratios, COV (coefficient of variations) of IMEP (indicated mean effective pressure), NO X , and smoke using the optimum condition factors are compared with those by original baseline diesel engine. The predictions made using Taguchi's parameter design technique agreed with the confirmation results on 95% confidence interval. At 45% and 60% loads the optimum factor combination compared with the original baseline diesel engine reduces 14.52% for BSFC, 60.5% for NO X and for 42.28% smoke and improves combustion performance such as peak in-cylinder pressure and net heat-release rate. Adding hydrogen and EGR would not generate unstable combustion due to lower COV of IMEP. -- Highlights: ► We use hydrogen injector controlled by ECU and cooled EGR system in a diesel engine. ► Optimal factors by Taguchi method are determined for low BSFC, NO X and smoke. ► The COV of IMEP is lower than 10% so it will not cause the unstable combustion. ► We improve A/F ratio, in-cylinder pressure, and heat-release at optimized engine. ► Decrease is 14.5% for BSFC, 60.5% for NO X , and 42.28% for smoke at optimized engine.

  8. Determination of optimal conditions for pressure oxidative leaching of Sarcheshmeh Molybdenite concentrate using Taguchi method

    Directory of Open Access Journals (Sweden)

    Khoshnevisana A.

    2012-01-01

    Full Text Available The present research work is based on finding the optimum conditions for pressure oxidative leaching of the molybdenite concentrate to produce technical-grade molybdic oxide (MoO3 with high recovery through further treatment of the filtrate solution. The Taguchi method was used to design and minimize the number of experiments. By using Taguchi orthogonal (L25 array, five parameters (time, temperature, oxygen pressure, pulp density and acid concentration at five levels were selected for 25 experiments. The experiments were designed and carried out in a high-pressure reactor in the presence of nitric acid as solvent and oxidizing agent for the molybdenite concentrate and its ReS2 content. The optimum conditions for pressure leaching of molybdenite were obtained through using Signal to Noise analysis and modified by using Minitab software prediction tool. Furthermore, the optimum condition for an economical pressure leaching of rhenium sulfide (ReS2 was achieved with the same process. Analysis of variance (ANOVA showed that the pulp density is of paramount importance in this process.

  9. Experimental study of optimal self compacting concrete with spent foundry sand as partial replacement for M-sand using Taguchi approach

    Directory of Open Access Journals (Sweden)

    Nirmala D.B.

    2016-06-01

    Full Text Available This paper presents the application of Taguchi approach to obtain optimal mix proportion for Self Compacting Concrete (SCC containing spent foundry sand and M-sand. Spent foundry sand is used as a partial replacement for M-sand. The SCC mix has seven control factors namely, Coarse aggregate, M-sand with Spent Foundry sand, Cement, Fly ash, Water, Super plasticizer and Viscosity modifying agent. Modified Nan Su method is used to proportion the initial SCC mix. L18 (21×37 Orthogonal Arrays (OA with the seven control factors having 3 levels is used in Taguchi approach which resulted in 18 SCC mix proportions. All mixtures are extensively tested both in fresh and hardened states to verify whether they meet the practical and technical requirements of SCC. The quality characteristics considering “Nominal the better” situation is applied to the test results to arrive at the optimal SCC mix proportion. Test results indicate that the optimal mix satisfies the requirements of fresh and hardened properties of SCC. The study reveals the feasibility of using spent foundry sand as a partial replacement of M-sand in SCC and also that Taguchi method is a reliable tool to arrive at optimal mix proportion of SCC.

  10. Experimental study of optimal self compacting concrete with spent foundry sand as partial replacement for M-sand using Taguchi approach

    Science.gov (United States)

    Nirmala, D. B.; Raviraj, S.

    2016-06-01

    This paper presents the application of Taguchi approach to obtain optimal mix proportion for Self Compacting Concrete (SCC) containing spent foundry sand and M-sand. Spent foundry sand is used as a partial replacement for M-sand. The SCC mix has seven control factors namely, Coarse aggregate, M-sand with Spent Foundry sand, Cement, Fly ash, Water, Super plasticizer and Viscosity modifying agent. Modified Nan Su method is used to proportion the initial SCC mix. L18 (21×37) Orthogonal Arrays (OA) with the seven control factors having 3 levels is used in Taguchi approach which resulted in 18 SCC mix proportions. All mixtures are extensively tested both in fresh and hardened states to verify whether they meet the practical and technical requirements of SCC. The quality characteristics considering "Nominal the better" situation is applied to the test results to arrive at the optimal SCC mix proportion. Test results indicate that the optimal mix satisfies the requirements of fresh and hardened properties of SCC. The study reveals the feasibility of using spent foundry sand as a partial replacement of M-sand in SCC and also that Taguchi method is a reliable tool to arrive at optimal mix proportion of SCC.

  11. Analysis of process parameters in surface grinding using single objective Taguchi and multi-objective grey relational grade

    Directory of Open Access Journals (Sweden)

    Prashant J. Patil

    2016-09-01

    Full Text Available Close tolerance and good surface finish are achieved by means of grinding process. This study was carried out for multi-objective optimization of MQL grinding process parameters. Water based Al2O3 and CuO nanofluids of various concentrations are used as lubricant for MQL system. Grinding experiments were carried out on instrumented surface grinding machine. For experimentation purpose Taguchi's method was used. Important process parameters that affect the G ratio and surface finish in MQL grinding are depth of cut, type of lubricant, feed rate, grinding wheel speed, coolant flow rate, and nanoparticle size. Grinding performance was calculated by the measurement G ratio and surface finish. For improvement of grinding process a multi-objective process parameter optimization is performed by use of Taguchi based grey relational analysis. To identify most significant factor of process analysis of variance (ANOVA has been used.

  12. Dye-Sensitized Solar Cells with Optimal Gel Electrolyte Using the Taguchi Design Method

    Directory of Open Access Journals (Sweden)

    Jenn-Kai Tsai

    2013-01-01

    Full Text Available The Taguchi method was adopted to determine the optimal gel electrolyte used in dye-sensitized solar cells (DSSCs. Since electrolyte is a very important factor in fabrication of high performance and long-term stability DSSCs, to find the optimal composition of gel electrolyte is desired. In this paper, the common ingredients used in the liquid electrolyte were chosen. The ingredients then mixed with cheap ionic liquids and poly(vinylidenefluoride-co-hexafluoropropylene (PVDF-HFP were added to form colloidal electrolyte (gel. The optimal composition of each materials in the gel electrolyte determined by Taguchi method consists of 0.03 M I2, 0.15 M KI, 0.6 M LiI, 0.5 M 4-tertbutylpyridine (TBP, and 10% PVDF-HFP dissolved in the acetonitrile and 3-methoxypropionitrile (MPN solution with volume ratio of 2 : 1. The short circuit current density of 14.11 mA/cm2, the conversion efficiency (η of 5.52%, and the lifetime of over 110 days were observed for the dye-sensitized solar cell assembled with optimal gel electrolyte. The lifetime increases 10 times when compared with the conventional dye-sensitized solar cell assembled with liquid electrolyte.

  13. Tapped density optimisation for four agricultural wastes - Part II: Performance analysis and Taguchi-Pareto

    Directory of Open Access Journals (Sweden)

    Ajibade Oluwaseyi Ayodele

    2016-01-01

    Full Text Available In this attempt, which is a second part of discussions on tapped density optimisation for four agricultural wastes (particles of coconut, periwinkle, palm kernel and egg shells, performance analysis for comparative basis is made. This paper pioneers a study direction in which optimisation of process variables are pursued using Taguchi method integrated with the Pareto 80-20 rule. Negative percentage improvements resulted when the optimal tapped density was compared with the average tapped density. However, the performance analysis between optimal tapped density and the peak tapped density values yielded positive percentage improvements for the four filler particles. The performance analysis results validate the effectiveness of using the Taguchi method in improving the tapped density properties of the filler particles. The application of the Pareto 80-20 rule to the table of parameters and levels produced revised tables of parameters and levels which helped to identify the factor-levels position of each parameter that is economical to optimality. The Pareto 80-20 rule also produced revised S/N response tables which were used to know the relevant S/N ratios that are relevant to optimality.

  14. Academic Degradation and the Retreat of the Editors: Academic Irregularities and the Spreading of Academic Corruption from an Editor's Perspective

    Science.gov (United States)

    Xun, Gong

    2007-01-01

    Against the backdrop of the grave academic crisis in China, editors have become the objects of wooing, favor-currying, connections-seeking, and collusions; they have been targeted for attacks, plots, extortions, and encroachments. Editing and publishing have become avenues for academic irregularities and academic corruption. Editors have the power…

  15. Data Sharing: A New Editorial Initiative of the International Committee of Medical Journal Editors. Implications for the Editors´ Network.

    Science.gov (United States)

    Alfonso, Fernando; Adamyan, Karlen; Artigou, Jean-Yves; Aschermann, Michael; Boehm, Michael; Buendia, Alfonso; Chu, Pao-Hsien; Cohen, Ariel; Cas, Livio Dei; Dilic, Mirza; Doubell, Anton; Echeverri, Dario; Enç, Nuray; Ferreira-González, Ignacio; Filipiak, Krzysztof J; Flammer, Andreas; Fleck, Eckart; Gatzov, Plamen; Ginghina, Carmen; Goncalves, Lino; Haouala, Habib; Hassanein, Mahmoud; Heusch, Gerd; Huber, Kurt; Hulín, Ivan; Ivanusa, Mario; Krittayaphong, Rungroj; Lau, Chu-Pak; Marinskis, Germanas; Mach, François; Moreira, Luiz Felipe; Nieminen, Tuomo; Oukerraj, Latifa; Perings, Stefan; Pierard, Luc; Potpara, Tatjana; Reyes-Caorsi, Walter; Rim, Se-Joong; Rødevand, Olaf; Saade, Georges; Sander, Mikael; Shlyakhto, Evgeny; Timuralp, Bilgin; Tousoulis, Dimitris; Ural, Dilek; Piek, J J; Varga, Albert; Lüscher, Thomas F

    2017-05-01

    The International Committee of Medical Journal Editors (ICMJE) provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical aspects of the scientific process. Recently, registration of clinical trials, conflicts of interest disclosure, and new criteria for authorship - emphasizing the importance of responsibility and accountability-, have been proposed. Last year, a new editorial initiative to foster sharing of clinical trial data was launched. This review discusses this novel initiative with the aim of increasing awareness among readers, investigators, authors and editors belonging to the Editors´ Network of the European Society of Cardiology. Resumo O Comitê Internacional de Editores de Revistas Médicas (ICMJE) fornece recomendações para aprimorar o padrão editorial e a qualidade científica das revistas biomédicas. Tais recomendações variam desde requisitos técnicos de uniformização até assuntos editoriais mais complexos e elusivos, como os aspectos éticos do processo científico. Recentemente, foram propostos registro de ensaios clínicos, divulgação de conflitos de interesse e novos critérios de autoria, enfatizando a importância da responsabilidade e da responsabilização. No último ano, lançou-se uma nova iniciativa editorial para fomentar o compartilhamento dos dados de ensaios clínicos. Esta revisão discute essa nova iniciativa visando a aumentar a conscientização de leitores, investigadores, autores e editores filiados à Rede de Editores da Sociedade Europeia de Cardiologia.

  16. From Editor vol 11, No.4

    OpenAIRE

    Ugur Demiray

    2010-01-01

    Greetings Dear readers of TOJDE,TOJDE is appeared on your screen now as Volume 11, Number: 4. In this issue it is published 4 notes for Editor, 12 articles, 2 book and one conference reviews. And this time, 27 authors from 10 different countries are placed. These published articles are from Bangldesh, Greece, India, Israel, Malaysia, Nigeria, Portugal, Singapore, Turkey and USA.The first Notes for editor arrived from USA, written by Kevin YEE and Jace HARGIS. They focused on PREZI: A Differen...

  17. Announcement: New Editor-in-Chief Robert C. Kennicutt

    Science.gov (United States)

    Abt, Helmut A.

    1999-05-01

    Effective 1999 July 1, all new manuscripts for Part 1 of The Astrophysical Journal and The Astrophysical Journal Supplement Series should be sent to Dr. Robert C. Kennicutt, Editor-in-Chief The Astrophysical Journal Steward Observatory University of Arizona Tucson, AZ 85721-0065 The other means of contact are telephone, (520) 621-5145 FAX, (520) 621-5153 and e-mail, apj@as.arizona.edu. For express packages please use the street address of 933 North Cherry Avenue. Dr. Kennicutt will be assisted by several of my loyal coworkers, who will move across the street. Manuscripts received before July 1 will be handled by the current editor until most of their problems have been resolved, at which point the remainder will be sent to Dr. Kennicutt's office. Manuscripts for the Letters should, as before, be sent directly to Dr. Alex Dalgarno at the Center for Astrophysics in Cambridge, MA. We are fortunate that a person with as much experience in research and proven good judgment as Dr. Kennicutt is willing to accept this difficult and time-consuming responsibility. He will be only the seventh Managing Editor or Editor-in-Chief that this Journal has had in its 104 years. Please give him the cooperation and help that you have given the current editor. It has been my privilege to work for 28 years with many of the best astrophysicists in the world and to publish their papers. This was done with the help of the AAS Publications Board and AAS officers, the efforts of Peter Boyce and Evan Owens who made the on-line edition of the Journal possible, three Associate Editors, a score of Scientific Editors, a hardworking staff of six in Tucson, up to 25 production controllers and manuscript editors at the University of Chicago Press, and the thousands of astronomers throughout the world who served as referees. The original masthead called this journal ``An International Review of Spectroscopy and Astronomical Physics.'' That subtitle is no longer appropriate because we do not publish

  18. TAGUCHI METHOD FOR THREE-STAGE ASSEMBLY FLOW SHOP SCHEDULING PROBLEM WITH BLOCKING AND SEQUENCE-DEPENDENT SET UP TIMES

    Directory of Open Access Journals (Sweden)

    AREF MALEKI-DARONKOLAEI

    2013-10-01

    Full Text Available This article considers a three-stage assembly flowshop scheduling problem minimizing the weighted sum of mean completion time and makespan with sequence-dependent setup times at the first stage and blocking times between each stage. To tackle such an NP-hard, two meta-heuristic algorithms are presented. The novelty of our approach is to develop a variable neighborhood search algorithm (VNS and a well-known simulated annealing (SA for the problem. Furthermore, to enhance the performance of the (SA, its parameters are optimized by the use of Taguchi method, but to setting parameters of VNS just one parameter has been used without Taguchi. The computational results show that the proposed VNS is better in mean and standard deviation for all sizes of the problem than SA, but on the contrary about CPU Time SA outperforms VNS.

  19. Application of Taguchi Design and Response Surface Methodology for Improving Conversion of Isoeugenol into Vanillin by Resting Cells of Psychrobacter sp. CSW4.

    Science.gov (United States)

    Ashengroph, Morahem; Nahvi, Iraj; Amini, Jahanshir

    2013-01-01

    For all industrial processes, modelling, optimisation and control are the keys to enhance productivity and ensure product quality. In the current study, the optimization of process parameters for improving the conversion of isoeugenol to vanillin by Psychrobacter sp. CSW4 was investigated by means of Taguchi approach and Box-Behnken statistical design under resting cell conditions. Taguchi design was employed for screening the significant variables in the bioconversion medium. Sequentially, Box-Behnken design experiments under Response Surface Methodology (RSM) was used for further optimization. Four factors (isoeugenol, NaCl, biomass and tween 80 initial concentrations), which have significant effects on vanillin yield, were selected from ten variables by Taguchi experimental design. With the regression coefficient analysis in the Box-Behnken design, a relationship between vanillin production and four significant variables was obtained, and the optimum levels of the four variables were as follows: initial isoeugenol concentration 6.5 g/L, initial tween 80 concentration 0.89 g/L, initial NaCl concentration 113.2 g/L and initial biomass concentration 6.27 g/L. Under these optimized conditions, the maximum predicted concentration of vanillin was 2.25 g/L. These optimized values of the factors were validated in a triplicate shaking flask study and an average of 2.19 g/L for vanillin, which corresponded to a molar yield 36.3%, after a 24 h bioconversion was obtained. The present work is the first one reporting the application of Taguchi design and Response surface methodology for optimizing bioconversion of isoeugenol into vanillin under resting cell conditions.

  20. From the Editors

    Directory of Open Access Journals (Sweden)

    Sibel Sakarya Yucel Demiral

    2017-04-01

    Full Text Available Prof. Ray W. Guillery, English Editor of our Journal has passed away… Prof. Guillery (Greifswald-Germany; 1929 is a British physiologist and neuroanatomist. He began his education as a medical student at University College London (UCL. He obtained his BSc and his PhD in Anatomy. Guillery taught at UCL for 11 years. He helped to start the new graduate program in neuroscience in several Universities. In 1989, Guillery was the founding editor-in-chief of the European Journal of Neuroscience. He was Honorary Emeritus Research Fellow at the Anatomical Neuropharmacology Unit at Oxford since 2010.Prof R Guillery joined Turkish Journal of Public Health family with the second issue of 2008 and since then he worked with us for English edition of 24 issues voluntarily;  always in time and with a unique care. He would not only correct English grammar mistakes in manuscripts; but provide significant contribution by indicating unclear points as an interested reader; despite public health was not his area. During time, he developed interest to several public health issues and discussed with us. Ray was not only good in words but numbers; he would detect calculation mistakes in the manuscripts which were missed by reviewers and/or editors. Prof Ray Guillery conducted a course on Scientific Writing in English during National Public Health Congress which was held in Bursa. He has been always keen and generous in sharing his knowledge and experience. He never stopped his works in neuroscience and anatomy and completed his last book a few weeks before passing away.A big loss for scientific world and for our Journal. We express our appreciation for his contribution to our Journal and to all of us. Sibel Sakarya, Yücel Demiral 

  1. Data Sharing: A New Editorial Initiative of the International Committee of Medical Journal Editors. Implications for the Editors' Network.

    Science.gov (United States)

    Alfonso, Fernando; Adamyan, Karlen; Artigou, Jean-Yves; Aschermann, Michael; Boehm, Michael; Buendia, Alfonso; Chu, Pao-Hsien; Cohen, Ariel; Cas, Livio Dei; Dilic, Mirza; Doubell, Anton; Echeverri, Dario; Enç, Nuray; Ferreira-González, Ignacio; Filipiak, Krzysztof J; Flammer, Andreas; Fleck, Eckart; Gatzov, Plamen; Ginghina, Carmen; Goncalves, Lino; Haouala, Habib; Hassanein, Mahmoud; Heusch, Gerd; Huber, Kurt; Hulín, Ivan; Ivanusa, Mario; Krittayaphong, Rungroj; Lau, Chu-Pak; Marinskis, Germanas; Mach, François; Moreira, Luiz Felipe; Nieminen, Tuomo; Oukerraj, Latifa; Perings, Stefan; Pierard, Luc; Potpara, Tatjana; Reyes-Caorsi, Walter; Rim, Se-Joong; Rødevand, Olaf; Saade, Georges; Sander, Mikael; Shlyakhto, Evgeny; Timuralp, Bilgin; Tousoulis, Dimitris; Ural, Dilek; Piek, J J; Varga, Albert; Lüscher, Thomas F

    The International Committee of Medical Journal Editors (ICMJE) provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical aspects of the scientific process. Recently, registration of clinical trials, conflicts of interest disclosure, and new criteria for authorship - emphasizing the importance of responsibility and accountability -, have been proposed. Last year, a new editorial initiative to foster sharing of clinical trial data was launched. This review discusses this novel initiative with the aim of increasing awareness among readers, investigators, authors and editors belonging to the Editors' Network of the European Society of Cardiology. Copyright © 2017. Publicado por Masson Doyma México S.A.

  2. Particle Track Visualization using the MCNP Visual Editor

    International Nuclear Information System (INIS)

    Schwarz, Randolph A.; Carter, Lee; Brown, Wendi A.

    2001-01-01

    The Monte Carlo N-Particle (MCNP) visual editor1,2,3 is used throughout the world for displaying and creating complex MCNP geometries. The visual editor combines the Los Alamos MCNP Fortran code with a C front end to provide a visual interface. A big advantage of this approach is that the particle transport routines for MCNP are available to the visual front end. The latest release of the visual editor by Pacific Northwest National Laboratory enables the user to plot transport data points on top of a two-dimensional geometry plot. The user can plot source points, collisions points, surface crossings, and tally contributions. This capability can be used to show where particle collisions are occurring, verify the effectiveness of the particle biasing, or show which collisions contribute to a tally. For a KCODE (criticality source) calculation, the visual editor can be used to plot the source points for specific cycles

  3. Optimization of the Adhesion Strength of Arc Ion Plating TiAlN Films by the Taguchi Method

    Directory of Open Access Journals (Sweden)

    Tong-Yul Cho

    2009-06-01

    Full Text Available A three-level six-factor (arc power, substrate temperature, pre-treatment bias voltage, working pressure, deposition bias voltage and pretreatment time orthogonal experimental array (L18 to optimize the adhesion strength of arc ion plating (AIP TiAlN films was designed using the Taguchi method. An optimized film process, namely substrate temperature 220 °C, arc power 60 A, negative bias voltage -800 V, nitrogen pressure 10-2 Torr, pretreated voltage -450 V and pretreated time 15 minutes was obtained by the Taguchi program for the purpose of obtaining a larger critical load. The critical load of the optimized TiAlN film (53 N was increased by 43% compared to the film with the highest critical load before optimization. The improvement in the adhesion strength of the films was attributed to the enhancement of hardness and the competitive growth of the (111, (200 and (220 orientations in the film.

  4. CERN Courier editors through 50 years

    CERN Multimedia

    2009-01-01

    The 50th anniversary of the first publication of the CERN Courier provided the opportunity for a modest celebration on 2 September 2009. All six of the principal editors that the magazine has had over its 50 years met together for the first time. After getting acquainted and re-acquainted over lunch, they gathered in the library at CERN to answer questions about producing the magazine over the years. From right to left, from the first editor to the present incumbent: Roger Anthoine, Alec Hester, Brian Southworth, Gordon Fraser, James Gillies and Christine Sutton.

  5. Comparative Study Between the Two Experimental Design Approaches Taguchi and Traditional in Presence of Control by Control Interactions

    Directory of Open Access Journals (Sweden)

    Arias-Nava Elías Heriberto

    2015-03-01

    Full Text Available Design of experiments plays an important role in the field of creating and innovating process and products directly in manufacturing and improving areas. There are several areas into designs of experiments; robust design is one of them. Robust parameter design is a principle that emphasize in products creation through a correct selection of values called “control” which make a product robust to the variability by the noise introducing by another factors known as “noise” factors. This article aims for a comparative study between two well-known robust design methodologies, making a special emphasis in the control by control interaction effects over optimal operating conditions. The results showed that Taguchi´s crossed arrays are unable to estimate all significant terms in a model. The optimizations result concludes that the Taguchi´s approach is less efficient than the traditional approach in both; maximization and minimization.

  6. From Editor

    OpenAIRE

    Ugur Demiray

    2009-01-01

    TOJDE is appeared on your screen now as Volume 10, Number: 1. This is the first issue of the year 2009 and 10th anniversary of TOJDE. In this issue it is published four article are in “Notes for Editor Sectio”, 13 articles, 2 reviews. And this time, 26 authors from twelwe different countries are placed. These published articles are from Australia, Botswana, Canada, Italy India, Jordan, Malaysia, Nigeria, Srilanka, USA and Turkey. “Service Learning In Distance Education: Foreign Language Lear...

  7. Table of Contents | Editor | Ghana Journal of Linguistics

    African Journals Online (AJOL)

    2016. Editorial Committee: Ọbádélé Kambon (Editor-in-Chief; University of Ghana). E. Kweku Osam (Consulting Editor; University of Ghana). Gordon S. Adika (University of Ghana). Nana Aba A. Amfo (University of Ghana). Jemima A. Anderson (University of Ghana). Charles O. Marfo (Kwame Nkrumah University of Science ...

  8. PDB Editor: a user-friendly Java-based Protein Data Bank file editor with a GUI.

    Science.gov (United States)

    Lee, Jonas; Kim, Sung Hou

    2009-04-01

    The Protein Data Bank file format is the format most widely used by protein crystallographers and biologists to disseminate and manipulate protein structures. Despite this, there are few user-friendly software packages available to efficiently edit and extract raw information from PDB files. This limitation often leads to many protein crystallographers wasting significant time manually editing PDB files. PDB Editor, written in Java Swing GUI, allows the user to selectively search, select, extract and edit information in parallel. Furthermore, the program is a stand-alone application written in Java which frees users from the hassles associated with platform/operating system-dependent installation and usage. PDB Editor can be downloaded from http://sourceforge.net/projects/pdbeditorjl/.

  9. a worldwide assessment of medical journal editors' practices and ...

    African Journals Online (AJOL)

    responding editors reported having access to the Internet, making participation in ... of improving the quality of medical science and practice.! A critical activity of ... undertook a worldwide survey of medical editors to determine their interest in a ...

  10. Optimization of CO2 Laser Cutting Process using Taguchi and Dual Response Surface Methodology

    Directory of Open Access Journals (Sweden)

    M. Madić

    2014-09-01

    Full Text Available Selection of optimal cutting parameter settings for obtaining high cut quality in CO2 laser cutting process is of great importance. Among various analytical and experimental optimization methods, the application of Taguchi and response surface methodology is one of most commonly used for laser cutting process optimization. Although the concept of dual response surface methodology for process optimization has been used with success, till date, no experimental study has been reported in the field of laser cutting. In this paper an approach for optimization of CO2 laser cutting process using Taguchi and dual response surface methodology is presented. The goal was to determine the near optimal laser cutting parameter values in order to ensure robust condition for minimization of average surface roughness. To obtain experimental database for development of response surface models, Taguchi’s L25 orthogonal array was implemented for experimental plan. Three cutting parameters, the cutting speed (3, 4, 5, 6, 7 m/min, the laser power (0.7, 0.9, 1.1, 1.3, 1.5 kW, and the assist gas pressure (3, 4, 5, 6, 7 bar, were used in the experiment. To obtain near optimal cutting parameters settings, multi-stage Monte Carlo simulation procedure was performed on the developed response surface models.

  11. Designing Epigenome Editors: Considerations of Biochemical and Locus Specificities.

    Science.gov (United States)

    Sen, Dilara; Keung, Albert J

    2018-01-01

    The advent of locus-specific protein recruitment technologies has enabled a new class of studies in chromatin biology. Epigenome editors enable biochemical modifications of chromatin at almost any specific endogenous locus. Their locus specificity unlocks unique information including the functional roles of distinct modifications at specific genomic loci. Given the growing interest in using these tools for biological and translational studies, there are many specific design considerations depending on the scientific question or clinical need. Here we present and discuss important design considerations and challenges regarding the biochemical and locus specificities of epigenome editors. These include how to account for the complex biochemical diversity of chromatin; control for potential interdependency of epigenome editors and their resultant modifications; avoid sequestration effects; quantify the locus specificity of epigenome editors; and improve locus specificity by considering concentration, affinity, avidity, and sequestration effects.

  12. Communicating specialized knowledge - negotiating knowledge communication between writer and editor

    DEFF Research Database (Denmark)

    Petersen, Margrethe

    In communicating research findings, authors of academic journal articles face the challenge of overcoming the barriers posed by the knowledge asymmetries between (a) authors and journal readership and (b) authors and editors. Considering the general taxonomy of the submission procedure and the ke...... role of academic journal editors, the issue of whether, regardless of the quality of the submissions received, editors are sometimes insurmountable barriers to knowledge communication should be debated....

  13. From Editor

    OpenAIRE

    Ugur Demiray

    2008-01-01

    Greetings Dear readers of TOJDE, TOJDE is appeared on your screen now as Volume 9, Number: 4. This is the fourth and the last issue of the year 2008. In this issue it is published two notes for Editor, 13 articles, 2 reviews. And this time, 23 authors from seven different countries are placed. These published articles are from Bangladesh, India, Malaysia, Nigeria, Saudi Arabia, USA and Turkey. “Ubiquitous, Free, And Efficient Online Collaboration Tools For Teaching And Learning” has sent to e...

  14. Current status in development of new EXFOR editor

    International Nuclear Information System (INIS)

    Sarsembayeva, A.; Ebata, S.; Kato, K.; Aikawa, M.; Imai, S.; Chiba, M.; Otuka, N.

    2016-01-01

    A new stand-alone type editor for EXFOR is being developed in Hokkaido University Nuclear Reaction Data Centre (JCPRG). The new editor is designed to allow compilers to save time and to avoid mistakes by using its advanced features. The features included in the latest release are described such as filterable and dynamic suggestion fields. (author)

  15. Editor's Note

    Directory of Open Access Journals (Sweden)

    Daniel Shanahan

    2016-07-01

    Full Text Available CORPUS studies have increasingly been of interest to music theorists, musicologists, and music psychology researchers, as is evident in the sheer number of excellent submissions to this special issue. The breadth and depth of these articles, as well as the insightful commentaries, make it seem only fitting to publish over two issues. The current issue contains five articles, eight commentaries, and one research report, and covers folk music, post-tonal music, jazz, Western art music, and the popular music found on Youtube. Eerola presents a model of melodic entropy that provides a nice framework for future information-theoretic work, while Roger Dean and Marcus Pearce present a new approach to modelling pitch-structure in post-tonal music. Frieler, Pfleiderer, Abeßer, and Zaddach give an analysis of jazz solos that demonstrates the role of a narrative arcs in improvisation. White and Quinn present a new corpus that makes use of vast compilations of web-based MIDI data, and demonstrates how such a corpus might be facilitate future musicological and music-theoretic research. Plazak focuses on Youtube as a corpus, and argues that the mutability of such a corpus facilitates our understanding of musical communication, as well as the important role of the listener in defining and re-defining such a dataset. It's encouraging to me both as an editor and practitioner of corpus methods that so many of those heavily involved with the field contributed to these two issues as either an author or a commentator. This issue also brings a number of changes on other fronts. Firstly, Nicola Dibben and Renee Timmers, who served as the journal's editors since Volume 7, have completed their editorial terms. They oversaw the transformation of the journal into a new Open Journal Systems platform, and were able to consistently produce issues that set a very high standard. Under their leadership, the journal both increased its accessibility (we now average more than 1

  16. EDITORIAL: Editor's Farewell

    Science.gov (United States)

    Hudson, R. P.

    1989-01-01

    The completion of Volume 26, 1989, marked the end of my tenure as Editor of Metrologia. My association with the journal, its parent body the Comité International des Poids et Mesures, its host organization the Bureau International des Poids et Mesures, the publishers Springer-Verlag and last (but by no means least) the Editorial Board, has been a pleasant one and I trust that the subscribers will have found the product to be generally satisfactory. There have been, it is true, some disappointments along the way and I shall mention two of these while expressing the hope that the new Editor will enjoy a greater success in their regard. First is the question of circulation, which has stayed dangerously low, although the shrinkage has tapered off in the most recent years. Because of the narrow public support, the costs of production are relatively high and this, through a consequently high subscription rate, tends to enshrine the unsatisfactory state of affairs. Modest schemes to broaden the journal's appeal and bring in a wider readership have foundered upon the first step, namely, that of procuring from staff members of the national standards laboratories the hoped-for articles which would discuss the state of the art in delivering the highest-quality measurement services to the public. However, some very interesting and bolder schemes are presently under discussion. I had also hoped to leaven the journal's content a little by regularly appearing articles on the latest developments within the great national laboratories. But, as with technical review articles, it has proven very difficult to find the right authors who can also spare the time, and only a few laboratories have found it possible to collaborate. In taking my leave, it remains for me to thank all the contributors, referees and readers for their support, to express the hope of an ever brighter future for Metrologia and to wish to the new Editor, Dr D A Blackburn, a happy and successful tenure.

  17. Announcement: New Editor-In-Chief, Robert C. Kennicutt, Jr.

    Science.gov (United States)

    Abt, Helmut A.

    1999-06-01

    Effective 1999 July 1, all new manuscripts for Part 1 of The Astrophysical Journal and The Astrophysical Journal Supplement Series should be sent to Dr. Robert C. Kennicutt, Jr., Editor-in-Chief The Astrophysical Journal Steward Observatory University of Arizona Tucson, AZ 85721-0065 The other means of contact are telephone, (520) 621-5145 FAX, (520) 621-5153 and e-mail, apj@as.arizona.edu. For express packages please use the street address of 933 North Cherry Avenue. Dr. Kennicutt will be assisted by several of my loyal coworkers, who will move across the street. Manuscripts received before July 1 will be handled by the current editor until most of their problems have been resolved, at which point the remainder will be sent to Dr. Kennicutt's office. Manuscripts for the Letters should, as before, be sent directly to Dr. Alex Dalgarno at the Center for Astrophysics in Cambridge, MA. We are fortunate that a person with as much experience in research and proven good judgment as Dr. Kennicutt is willing to accept this difficult and time-consuming responsibility. He will be only the seventh Managing Editor or Editor-in-Chief that this Journal has had in its 104 years. Please give him the cooperation and help that you have given the current editor. It has been my privilege to work for 28 years with many of the best astrophysicists in the world and to publish their papers. This was done with the help of the AAS Publications Board and AAS officers, the efforts of Peter Boyce and Evan Owens who made the on-line edition of the Journal possible, three Associate Editors, a score of Scientific Editors, a hardworking staff of six in Tucson, up to 25 production controllers and manuscript editors at the University of Chicago Press, and the thousands of astronomers throughout the world who served as referees. The original masthead called this journal ``An International Review of Spectroscopy and Astronomical Physics.'' That subtitle is no longer appropriate because we do not

  18. Object class hierarchy for an incremental hypertext editor

    Directory of Open Access Journals (Sweden)

    A. Colesnicov

    1995-02-01

    Full Text Available The object class hierarchy design is considered due to a hypertext editor implementation. The following basic classes were selected: the editor's coordinate system, the memory manager, the text buffer executing basic editing operations, the inherited hypertext buffer, the edit window, the multi-window shell. Special hypertext editing features, the incremental hypertext creation support and further generalizations are discussed.

  19. Peer reviews and the role of a journal editor

    Science.gov (United States)

    Obtaining peer reviews for manuscripts submitted to scientific journals is becoming increasingly difficult. Changes to the system are necessary, and editors must cultivate and maintain a solid base of reviewers to help evaluate journal submissions. This article outlines some steps editors can and sh...

  20. The RAE and Publications: A Review of Journal Editors.

    Science.gov (United States)

    Talib, Ameen Ali

    2000-01-01

    Surveyed editors of academic journals about publication issues related to Britain's Research Assessment Exercise (RAE), a process of grading and funding universities based on published research output. Editors were asked about research quality and output, publication practices, academics' willingness to referee manuscripts, and proliferation of…

  1. Fnom Editor

    OpenAIRE

    Ugur Demiray

    2006-01-01

    Greetings Dear readers of TOJDE, I am pleased to inform you that in the 7th year of TOJDE is appeared as Volume 7, Number: 1 on your screen now as. Very much thanks to all of you once more that we met 21st time, since January 2000. In this issue we published 15 articles, four book reviews, one notes for editor, news and announcements for our readers. And also, we give a place for the Call for Papers to the 4th Special Issue of The Turkish Online Journal of Distance Education (TOJDE) ...

  2. Editor de la revista: entre el sueño y la supervivencia

    Directory of Open Access Journals (Sweden)

    Targino, María das Graças

    2010-01-01

    Full Text Available Analiza el papel del editor científico, relaciona las habilidades necesarias para aquellos que anhelan ser editor y reanuda las funciones que él realiza en una revista científica. Revisa los conceptos clave, como editor y editora, edición y proceso editorial. Recuerda la tipología de las editoras, y, sobre todo, muestra que el editor vive la paradoja de responder a las cuestiones culturales del país en que vive (el sueño y asegurar las ganancias por los libros que publica (la supervivencia. Describe el mercado editorial brasileño de las publicaciones científicas, en referencia a los títulos impresos y electrónicos. Destaca la mediación entre el autor y el editor y los dilemas inherentes a la función de generar la producción intelectual (de cualquier naturaleza; la mercantilización creciente de la producción intelectual y científica como producto comercial; la multiplicidad de funciones que la cotidianidad impone al editor; la cuestión cantidad versus calidad de los originales enviados a las revistas científicas. Por último, destaca la importancia del editor de revistas científicas, que garantiza la seguridad, la calidad y el reconocimiento de los títulos publicados y, por lo tanto, de la comunicación científica mediante el cuidado con la calidad de los trabajos científicos.Abstract in English: Analyzes the role of scientific editor, lists the skills needed for those yearning to be editor and resumes his functions in a scientific journal. Review the main concepts such as editor and publisher, editing and publishing process. Presents the types of publishers, and, above all, shows that the editor is living the paradox of responding to the cultural issues in the country where he lives (his dreams and of ensuring profits for the enterprises (her survival. Describe the Brazilian publishing market of scientific publications, referring to the print and electronic titles. Stresses the mediation between the author and the editor

  3. The Lives and Hard Times of Magazine Editors in the Big Apple: A Report on the Society of Magazine Editors' Educators Seminar.

    Science.gov (United States)

    English, John W.

    This report chronicles the first Society of Magazine Editors' educators seminar, which was held in New York from May 13-17, 1974, and was attended by ten journalism faculty. The industry's concerns, as expressed through editors, are paper, printing, postage, people, and profit. The Magazine Publishers Association (MPA) seems mostly concerned with…

  4. Workbench surface editor of brain cortical surface

    Science.gov (United States)

    Dow, Douglas E.; Nowinski, Wieslaw L.; Serra, Luis

    1996-04-01

    We have developed a 3D reach-in tool to manually reconstruct 3D cortical surface patches from 2D brain atlas images. The first application of our cortex editor is building 3D functional maps, specifically Brodmann's areas. This tool may also be useful in clinical practice to adjust incorrectly mapped atlas regions due to the deforming effect of lesions. The cortex editor allows a domain expert to control the correlation of control points across slices. Correct correlation has been difficult for 3D reconstruction algorithms because the atlas slices are far apart and because of the complex topology of the cortex which differs so much from slice to slice. Also, higher precision of the resulting surfaces is demanded since these define 3D brain atlas features upon which future stereotactic surgery may be based. The cortex editor described in this paper provides a tool suitable for a domain expert to use in defining the 3D surface of a Brodmann's area.

  5. A scoping review of competencies for scientific editors of biomedical journals.

    Science.gov (United States)

    Galipeau, James; Barbour, Virginia; Baskin, Patricia; Bell-Syer, Sally; Cobey, Kelly; Cumpston, Miranda; Deeks, Jon; Garner, Paul; MacLehose, Harriet; Shamseer, Larissa; Straus, Sharon; Tugwell, Peter; Wager, Elizabeth; Winker, Margaret; Moher, David

    2016-02-02

    Biomedical journals are the main route for disseminating the results of health-related research. Despite this, their editors operate largely without formal training or certification. To our knowledge, no body of literature systematically identifying core competencies for scientific editors of biomedical journals exists. Therefore, we aimed to conduct a scoping review to determine what is known on the competency requirements for scientific editors of biomedical journals. We searched the MEDLINE®, Cochrane Library, Embase®, CINAHL, PsycINFO, and ERIC databases (from inception to November 2014) and conducted a grey literature search for research and non-research articles with competency-related statements (i.e. competencies, knowledge, skills, behaviors, and tasks) pertaining to the role of scientific editors of peer-reviewed health-related journals. We also conducted an environmental scan, searched the results of a previous environmental scan, and searched the websites of existing networks, major biomedical journal publishers, and organizations that offer resources for editors. A total of 225 full-text publications were included, 25 of which were research articles. We extracted a total of 1,566 statements possibly related to core competencies for scientific editors of biomedical journals from these publications. We then collated overlapping or duplicate statements which produced a list of 203 unique statements. Finally, we grouped these statements into seven emergent themes: (1) dealing with authors, (2) dealing with peer reviewers, (3) journal publishing, (4) journal promotion, (5) editing, (6) ethics and integrity, and (7) qualities and characteristics of editors. To our knowledge, this scoping review is the first attempt to systematically identify possible competencies of editors. Limitations are that (1) we may not have captured all aspects of a biomedical editor's work in our searches, (2) removing redundant and overlapping items may have led to the

  6. Optimization of the Machining parameter of LM6 Alminium alloy in CNC Turning using Taguchi method

    Science.gov (United States)

    Arunkumar, S.; Muthuraman, V.; Baskaralal, V. P. M.

    2017-03-01

    Due to widespread use of highly automated machine tools in the industry, manufacturing requires reliable models and methods for the prediction of output performance of machining process. In machining of parts, surface quality is one of the most specified customer requirements. In order for manufactures to maximize their gains from utilizing CNC turning, accurate predictive models for surface roughness must be constructed. The prediction of optimum machining conditions for good surface finish plays an important role in process planning. This work deals with the study and development of a surface roughness prediction model for machining LM6 aluminum alloy. Two important tools used in parameter design are Taguchi orthogonal arrays and signal to noise ratio (S/N). Speed, feed, depth of cut and coolant are taken as process parameter at three levels. Taguchi’s parameters design is employed here to perform the experiments based on the various level of the chosen parameter. The statistical analysis results in optimum parameter combination of speed, feed, depth of cut and coolant as the best for obtaining good roughness for the cylindrical components. The result obtained through Taguchi is confirmed with real time experimental work.

  7. Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory

    Science.gov (United States)

    Khanna, Rajesh; Kumar, Anish; Garg, Mohinder Pal; Singh, Ajit; Sharma, Neeraj

    2015-12-01

    Electric discharge drill machine (EDDM) is a spark erosion process to produce micro-holes in conductive materials. This process is widely used in aerospace, medical, dental and automobile industries. As for the performance evaluation of the electric discharge drilling machine, it is very necessary to study the process parameters of machine tool. In this research paper, a brass rod 2 mm diameter was selected as a tool electrode. The experiments generate output responses such as tool wear rate (TWR). The best parameters such as pulse on-time, pulse off-time and water pressure were studied for best machining characteristics. This investigation presents the use of Taguchi approach for better TWR in drilling of Al-7075. A plan of experiments, based on L27 Taguchi design method, was selected for drilling of material. Analysis of variance (ANOVA) shows the percentage contribution of the control factor in the machining of Al-7075 in EDDM. The optimal combination levels and the significant drilling parameters on TWR were obtained. The optimization results showed that the combination of maximum pulse on-time and minimum pulse off-time gives maximum MRR.

  8. EDITORIAL: Incoming Editor-in-Chief Incoming Editor-in-Chief

    Science.gov (United States)

    Birch, David

    2012-01-01

    It is a pleasure and an honour for me to be taking over as Editor-in-Chief of Measurement Science and Technology. MST is well known across research communities worldwide as a leading journal in which to publish new techniques and instrumentation. It has gained this enviable position largely because of the excellent guidance of its Editorial Board and dedicated staff at Institute of Physics Publishing over many years. I want to highlight in particular the contribution of the outgoing Editor Peter Hauptmann, and other Editors before him, in making the journal truly international. We thank Peter immensely for all his hard work in leading the journal, having exceptionally served two terms, each of five years. I come into the post of Editor at a very interesting and challenging time for research. The global recession is leading to cuts in research funding in many countries, researchers and their outputs are coming under closer scrutiny than ever before, and more is being expected of them. Journals play a critical role in monitoring and maintaining research standards, but we should be careful not to assume that journal Impact Factor is the sole measure of research quality. Although expediency may sometimes demand it, Impact Factor, as practitioners know, is subject dependent. One of the great things about science and technology for me is its level playing field. The key point is still innovation no matter where the work is done or where it is published. MST has a long pedigree of being the natural home of the highest quality papers from leading researchers wishing to report novel instrumentation and techniques. 2013 will mark the 90th anniversary of MST and we look forward to celebrating in style its sustained success. I recall with pride the first paper I published in Journal of Physics E: Scientific Instruments (as MST was previously titled) back in 1977. The paper reported the design and application of an early fluorescence lifetime spectrometer that I had constructed

  9. Letter to the editors

    African Journals Online (AJOL)

    2012-10-19

    Oct 19, 2012 ... (interleukin 10 (IL10), Tumor necrosis factor alpha (TNF- alpha) and interferon gamma (IFN-gamma) were done. ... 2. To the editors of the Pan African Medical Journal. Rheumatic heart disease (RHD) is a devastating squeal of acute rheumatic fever (ARF) in Africa. .... Gorgulu S, Eren M, Bagirtan B et al.

  10. Optimization of tribological performance of SiC embedded composite coating via Taguchi analysis approach

    Science.gov (United States)

    Maleque, M. A.; Bello, K. A.; Adebisi, A. A.; Akma, N.

    2017-03-01

    Tungsten inert gas (TIG) torch is one of the most recently used heat source for surface modification of engineering parts, giving similar results to the more expensive high power laser technique. In this study, ceramic-based embedded composite coating has been produced by precoated silicon carbide (SiC) powders on the AISI 4340 low alloy steel substrate using TIG welding torch process. A design of experiment based on Taguchi approach has been adopted to optimize the TIG cladding process parameters. The L9 orthogonal array and the signal-to-noise was used to study the effect of TIG welding parameters such as arc current, travelling speed, welding voltage and argon flow rate on tribological response behaviour (wear rate, surface roughness and wear track width). The objective of the study was to identify optimal design parameter that significantly minimizes each of the surface quality characteristics. The analysis of the experimental results revealed that the argon flow rate was found to be the most influential factor contributing to the minimum wear and surface roughness of the modified coating surface. On the other hand, the key factor in reducing wear scar is the welding voltage. Finally, a convenient and economical Taguchi approach used in this study was efficient to find out optimal factor settings for obtaining minimum wear rate, wear scar and surface roughness responses in TIG-coated surfaces.

  11. Quantifying the effect of editor-author relations on manuscript handling times.

    Science.gov (United States)

    Sarigöl, Emre; Garcia, David; Scholtes, Ingo; Schweitzer, Frank

    2017-01-01

    In this article we study to what extent the academic peer review process is influenced by social relations between the authors of a manuscript and the editor handling the manuscript. Taking the open access journal PlosOne as a case study, our analysis is based on a data set of more than 100,000 articles published between 2007 and 2015. Using available data on handling editor, submission and acceptance time of manuscripts, we study the question whether co-authorship relations between authors and the handling editor affect the manuscript handling time , i.e. the time taken between the submission and acceptance of a manuscript. Our analysis reveals (1) that editors handle papers co-authored by previous collaborators significantly more often than expected at random, and (2) that such prior co-author relations are significantly related to faster manuscript handling. Addressing the question whether these shorter manuscript handling times can be explained by the quality of publications, we study the number of citations and downloads which accepted papers eventually accumulate. Moreover, we consider the influence of additional (social) factors, such as the editor's experience, the topical similarity between authors and editors, as well as reciprocal citation relations between authors and editors. Our findings show that, even when correcting for other factors like time, experience, and performance, prior co-authorship relations have a large and significant influence on manuscript handling times, speeding up the editorial decision on average by 19 days.

  12. From the Editor

    Directory of Open Access Journals (Sweden)

    Ugur Demiray

    2007-04-01

    Full Text Available I am pleased to inform you that in the 8th year of TOJDE are appeared on your screen now as Volume 8, Number: 2. In this issue we published one notes for Editor, 14 articles, two reviews, news and announcements for our readers. 27 authors from ten different countries are placed in this issue. These published articles are from Australia, Bahrain, Bangladesh; Canada Indonesia, Malaysia, Pakistan, Turkey, UK and USA.

  13. From the editor's desk

    Indian Academy of Sciences (India)

    Ever since the Indian Academy of Sciences inherited the publication of the Journal of Genetics from J. B. S. Haldane, successive Editors-in-Chief, Profs H. Sharat Chandra, K. VijayRaghavan, Amitabh Joshi and Rajiva Raman, with the support of members of the editorial board, have not only sustained but also expanded the ...

  14. Multidisciplinary design of a rocket-based combined cycle SSTO launch vehicle using Taguchi methods

    Science.gov (United States)

    Olds, John R.; Walberg, Gerald D.

    1993-01-01

    Results are presented from the optimization process of a winged-cone configuration SSTO launch vehicle that employs a rocket-based ejector/ramjet/scramjet/rocket operational mode variable-cycle engine. The Taguchi multidisciplinary parametric-design method was used to evaluate the effects of simultaneously changing a total of eight design variables, rather than changing them one at a time as in conventional tradeoff studies. A combination of design variables was in this way identified which yields very attractive vehicle dry and gross weights.

  15. EDITORIAL: Message from the Editor Message from the Editor

    Science.gov (United States)

    Thomas, Paul

    2011-01-01

    As usual, being an even year, the 23rd IAEA Fusion Energy Conference took place at Daejeon, Korea. The event was notable not just for the quality of the presentations but also for the spectacular opening ceremony, in the presence of the Prime Minister, Kim Hwang-sik. The Prime Minister affirmed the importance of research into fusion energy research and pledged support for ITER. Such political visibility is good news, of course, but it brings with it the obligation to perform. Fortunately, good performance was much in evidence in the papers presented at the conference, of which a significant proportion contain 'ITER' in the title. Given this importance of ITER and the undertaking by the Nuclear Fusion journal to publish papers associated with Fusion Energy Conference presentations, the Nuclear Fusion Editorial Board has decided to adopt a simplified journal scope that encompasses technology papers more naturally. The scope is available from http://iopscience.iop.org/0029-5515/page/Journal%20information but is reproduced here for clarity: Nuclear Fusion publishes articles making significant advances to the field of controlled thermonuclear fusion. The journal scope includes: the production, heating and confinement of high temperature plasmas; the physical properties of such plasmas; the experimental or theoretical methods of exploring or explaining them; fusion reactor physics; reactor concepts; fusion technologies. The key to scope acceptability is now '....significant advances....' rather than any particular area of controlled thermonuclear fusion research. It is hoped that this will make scope decisions easier for the Nuclear Fusion office, the referees and the Editor.The Nuclear Fusion journal has continued to make an important contribution to the research programme and has maintained its position as the leading journal in the field. This is underlined by the fact that Nuclear Fusion has received an impact factor of 4.270, as listed in ISI's 2009 Science Citation

  16. Kamide reflects on JGR and the role of editor

    Science.gov (United States)

    Woods, Peter

    After serving the space physics community for more than 11 years, Y. Kamide of the Solar-Terrestrial Environment Laboratory at Nagoya University in Toyokawa, Japan, retired as editor of the Journal of Geophysical Research-Space Physics for the Asian/Pacific region. He had been a JGR editor since AGU first opened two editorial offices in Europe and the Asian/Pacific region in 1989. Even as the initial JGR editor in Asia, Kamide was not new to AGU editorial business. Before accepting the JGR position, Kamide served 3 years as the editor in Japan for Geophysical Research Letters.According to Kamide, over the last 5 years, the number of high-quality submissions to JGR in the Asian/Pacific region has increased dramatically, by a factor of 2.5. This increase came mostly from the younger generation of scientists, which bodes well for the future of JGR and space physics in general. Together with the substantial contributions to JGR from the European community, this achievement has been recognized by AGU as proof that JGR is truly an international journal of the highest editorial standards.

  17. Authors and editors assort on gender and geography in high-rank ecological publications.

    Directory of Open Access Journals (Sweden)

    Kezia R Manlove

    Full Text Available Peer-reviewed publication volume and caliber are widely-recognized proxies for academic merit, and a strong publication record is essential for academic success and advancement. However, recent work suggests that publication productivity for particular author groups may also be determined in part by implicit biases lurking in the publication pipeline. Here, we explore patterns of gender, geography, and institutional rank among authors, editorial board members, and handling editors in high-impact ecological publications during 2015 and 2016. A higher proportion of lead authors had female first names (33.9% than editorial board members (28.9%, and the proportion of female first names among handling editors was even lower (21.1%. Female editors disproportionately edited publications with female lead authors (40.3% of publications with female lead authors were handled by female editors, though female editors handled only 34.4% of all studied publications. Additionally, ecological authors and editors were overwhelmingly from countries in the G8, and high-ranking academic institutions accounted for a large portion of both the published work, and its editorship. Editors and lead authors with female names were typically affiliated with higher-ranking institutions than their male peers. This description of author and editor features provides a baseline for benchmarking future trends in the ecological publishing culture.

  18. Authors and editors assort on gender and geography in high-rank ecological publications.

    Science.gov (United States)

    Manlove, Kezia R; Belou, Rebecca M

    2018-01-01

    Peer-reviewed publication volume and caliber are widely-recognized proxies for academic merit, and a strong publication record is essential for academic success and advancement. However, recent work suggests that publication productivity for particular author groups may also be determined in part by implicit biases lurking in the publication pipeline. Here, we explore patterns of gender, geography, and institutional rank among authors, editorial board members, and handling editors in high-impact ecological publications during 2015 and 2016. A higher proportion of lead authors had female first names (33.9%) than editorial board members (28.9%), and the proportion of female first names among handling editors was even lower (21.1%). Female editors disproportionately edited publications with female lead authors (40.3% of publications with female lead authors were handled by female editors, though female editors handled only 34.4% of all studied publications). Additionally, ecological authors and editors were overwhelmingly from countries in the G8, and high-ranking academic institutions accounted for a large portion of both the published work, and its editorship. Editors and lead authors with female names were typically affiliated with higher-ranking institutions than their male peers. This description of author and editor features provides a baseline for benchmarking future trends in the ecological publishing culture.

  19. Report of the world association of medical editors: agenda for the future.

    Science.gov (United States)

    2001-04-01

    During a 3-day meeting at Bellagio in January 2001, a group of 20 editors from 12 countries in 5 continents met to map out a strategy for the World Association of Medical Editors (WAME)'s continued development in the service of medical editors over the next several years. The group: 1) Developed a statement of principles on the standards of professionalism and responsibilities of editors (this statement will be posted on the Web site after electronic consultation with and comment by WAME editors); 2) Agreed to assess the extent to which these principles are reflected in practice and to explore barriers to their adoption, using data from a survey and focus groups; 3) Developed and outlined an on-line program for distance learning, targeted at new editors; 4) Planned for formal evaluation of the educational outreach program; and 5) Agreed to support regional initiatives to strengthen local editorial capacity. Underpinning all past and proposed future activities is the WAME Web site. The ambitious plans outlined above will require extensive development of the site, plans for which were made at the Bellagio meeting.

  20. How Managing Editors View and Deal with Newspaper Ethical Issues.

    Science.gov (United States)

    Anderson, Douglas

    1987-01-01

    Claims there is awareness and concern about journalism ethics among daily newspaper managing editors. Asserts that although ethical issues are being addressed to some degree, greater efforts could be made to see that reporters and editors are apprised of codes of ethics. (MM)

  1. Editorial: Letter from the Editors

    Directory of Open Access Journals (Sweden)

    Wilhelm Heitmeyer

    2011-12-01

    Full Text Available This issue our guest editors are close to home. Wilhelm Heitmeyer and Steven F. Messner, both members of our own Board of Editors, have assembled a focus section examining the question of “Youth at Risk.” Their collection certainly lives up to our aspiration to be truly interdisciplinary and international. The methods applied in the reported research range from interview-based studies through empirical number-crunching to laboratory experiments (the latter a first for this journal; the geographical scope spans from Argentina through Central America and Europe to Africa. The youth at risk here are in conflict with the police, with each other, with societies that fear them, with societies that ignore their needs. Our systematically eclectic approach continues outside the focus section too, with contributions on the theory of violence, female fighters in Africa, and spousal violence in Pakistan.

  2. Formulation Development and Evaluation of Hybrid Nanocarrier for Cancer Therapy: Taguchi Orthogonal Array Based Design

    Directory of Open Access Journals (Sweden)

    Rakesh K. Tekade

    2013-01-01

    Full Text Available Taguchi orthogonal array design is a statistical approach that helps to overcome limitations associated with time consuming full factorial experimental design. In this study, the Taguchi orthogonal array design was applied to establish the optimum conditions for bovine serum albumin (BSA nanocarrier (ANC preparation. Taguchi method with L9 type of robust orthogonal array design was adopted to optimize the experimental conditions. Three key dependent factors namely, BSA concentration (% w/v, volume of BSA solution to total ethanol ratio (v : v, and concentration of diluted ethanolic aqueous solution (% v/v, were studied at three levels 3%, 4%, and 5% w/v; 1 : 0.75, 1 : 0.90, and 1 : 1.05 v/v; 40%, 70%, and 100% v/v, respectively. The ethanolic aqueous solution was used to impart less harsh condition for desolvation and attain controlled nanoparticle formation. The interaction plot studies inferred the ethanolic aqueous solution concentration to be the most influential parameter that affects the particle size of nanoformulation. This method (BSA, 4% w/v; volume of BSA solution to total ethanol ratio, 1 : 0.90 v/v; concentration of diluted ethanolic solution, 70% v/v was able to successfully develop Gemcitabine (G loaded modified albumin nanocarrier (M-ANC-G of size 25.07±2.81 nm (ζ=-23.03±1.015 mV as against to 78.01±4.99 nm (ζ=-24.88±1.37 mV using conventional method albumin nanocarrier (C-ANC-G. Hybrid nanocarriers were generated by chitosan layering (solvent gelation technique of respective ANC to form C-HNC-G and M-HNC-G of sizes 125.29±5.62 nm (ζ=12.01±0.51 mV and 46.28±2.21 nm (ζ=15.05±0.39 mV, respectively. Zeta potential, entrapment, in vitro release, and pH-based stability studies were investigated and influence of formulation parameters are discussed. Cell-line-based cytotoxicity assay (A549 and H460 cells and cell internalization assay (H460 cell line were performed to assess the

  3. Developing Visual Editors for High-Resolution Haptic Patterns

    DEFF Research Database (Denmark)

    Cuartielles, David; Göransson, Andreas; Olsson, Tony

    2012-01-01

    In this article we give an overview of our iterative work in developing visual editors for creating high resolution haptic patterns to be used in wearable, haptic feedback devices. During the past four years we have found the need to address the question of how to represent, construct and edit high...... resolution haptic patterns so that they translate naturally to the user’s haptic experience. To solve this question we have developed and tested several visual editors...

  4. Letters to the Editor

    Science.gov (United States)

    1999-09-01

    All the Letters to the Editor in this issue are in the same PostScript or PDF file. Contents The imaginary Sun? Harold Aspden Energy Science Ltd, PO Box 35, Southampton SO16 7RB, UK Difficult physics? Tim Akrill Chief Examiner, A-level Physics, Edexcel Foundation Was it a dream? Bill Jarvis 6 Peggy's Mill Road, Edinburgh EH4 6JY

  5. Letter from the Editors

    Directory of Open Access Journals (Sweden)

    Paul Boshears

    2012-08-01

    Full Text Available With grateful hearts we offer this, the second issue of our second volume. The result of months of back-breaking thinking, emailing, looking, clicking, watching, writing and reading, our summer issue is here. The editors could not have done this without your support. We welcome your materials for our future issues as well as your continued contributions.

  6. Letter from the Editors

    Directory of Open Access Journals (Sweden)

    The Editors

    2013-07-01

    Full Text Available With grateful hearts we offer this, the first issue of our third volume. The result of months of back-breaking thinking, emailing, looking, clicking, watching, writing and reading, our new issue is here. The editors could not have done this without your support. We welcome your materials for our future issues as well as your continued contributions.

  7. Letter from the Editors

    Directory of Open Access Journals (Sweden)

    Paul Boshears

    2012-11-01

    Full Text Available With grateful hearts we offer this, the third issue of our second volume. The result of months of back-breaking thinking, emailing, looking, clicking, watching, writing and reading, our fall issue is here. The editors could not have done this without your support. We welcome your materials for our future issues as well as your continued contributions.

  8. A methodology for quantitatively managing the bug fixing process using Mahalanobis Taguchi system

    Directory of Open Access Journals (Sweden)

    Boby John

    2015-12-01

    Full Text Available The controlling of bug fixing process during the system testing phase of software development life cycle is very important for fixing all the detected bugs within the scheduled time. The presence of open bugs often delays the release of the software or result in releasing the software with compromised functionalities. These can lead to customer dissatisfaction, cost overrun and eventually the loss of market share. In this paper, the authors propose a methodology to quantitatively manage the bug fixing process during system testing. The proposed methodology identifies the critical milestones in the system testing phase which differentiates the successful projects from the unsuccessful ones using Mahalanobis Taguchi system. Then a model is developed to predict whether a project is successful or not with the bug fix progress at critical milestones as control factors. Finally the model is used to control the bug fixing process. It is found that the performance of the proposed methodology using Mahalanobis Taguchi system is superior to the models developed using other multi-dimensional pattern recognition techniques. The proposed methodology also reduces the number of control points providing the managers with more options and flexibility to utilize the bug fixing resources across system testing phase. Moreover the methodology allows the mangers to carry out mid- course corrections to bring the bug fixing process back on track so that all the detected bugs can be fixed on time. The methodology is validated with eight new projects and the results are very encouraging.

  9. U.S. EPA Metadata Editor (EME)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The EPA Metadata Editor (EME) allows users to create geospatial metadata that meets EPA's requirements. The tool has been developed as a desktop application that...

  10. Prioritizing the effective factors on projectile performance by combination of Analytical Hierarchy Process (AHP method and design of experiment of Taguchi Case study: selected aerospace industries

    Directory of Open Access Journals (Sweden)

    saberreza bahrami

    2016-02-01

    Full Text Available The purpose of this research is to prioritize the effective factors in projectile performance. Prioritizing of these factors whit combination of Analytical Hierarchy Process (AHP method and design of experiment Of Taguchi help designers to develop the performance of projectile structure. According to this that since now, researcher tried to increase the performance of projectile whit change in every factors separately, so in this paper tried whit combination of AHP method and design of experiment of Taguchi , analyzed and prioritized all the effective factors in projectile performance simultaneously. For this purpose first by design of experiment Of Taguchi the influence of every these factors on two criteria of range and drift were calculated and then by AHP method these factors were prioritized. By considering of equal weight for both range and drift, the result shows between 11 factors, Firing Angle whit value of 0.3398, Muzzle Velocity whit value of 0.2918 and Burning Time whit value of 0.1257 were the most influenced factors in projectile performance respectively. Propellant Weight and Wind Velocity factors whit value of 0.0104 and 0.00092 were ranked in tenth and eleventh priority respectively.

  11. Predicting Post-Editor Profiles from the Translation Process

    DEFF Research Database (Denmark)

    Singla, Karan; Orrego-Carmona, David; Gonzales, Ashleigh Rhea

    2014-01-01

    The purpose of the current investigation is to predict post-editor profiles based on user behaviour and demographics using machine learning techniques to gain a better understanding of post-editor styles. Our study extracts process unit features from the CasMaCat LS14 database from the CRITT...... of translation process features. The classification and clustering of participants resulting from our study suggest this type of exploration could be used as a tool to develop new translation tool features or customization possibilities....

  12. Editor de la revista: entre el sueño y la supervivencia

    Directory of Open Access Journals (Sweden)

    Maria das Graças TARGINO

    2015-05-01

    Full Text Available Analiza el papel del editor científico, relaciona las habilidades necesarias para aquellos que anhelan ser editor y reanuda las funciones que él realiza en una revista científica. Revisa los conceptos clave, como editor y editora, edición y proceso editorial. Recuerda la tipología de las editoras, y, sobre todo, muestra que el editor vive la paradoja de responder a las cuestiones culturales del país en que vive (el sueño y asegurar las ganancias por los libros que publica (la supervivencia. Describe el mercado editorial brasileño de las publicaciones científicas, en referencia a los títulos impresos y electrónicos. Destaca la mediación entre el autor y el editor y los dilemas inherentes a la función de generar la producción intelectual (de cualquier naturaleza; la mercantilización creciente de la producción intelectual y científica como producto comercial; la multiplicidad de funciones que la cotidianidad impone al editor; la cuestión cantidad versus calidad de los originales enviados a las revistas científicas. Por último, destaca la importancia del editor de revistas científicas, que garantiza la seguridad, la calidad y el reconocimiento de los títulos publicados y, por lo tanto, de la comunicación científica mediante el cuidado con la calidad de los trabajos científicos.

  13. Editor de la revista: entre el sueño y la supervivencia

    Directory of Open Access Journals (Sweden)

    Maria das Graças TARGINO

    2014-07-01

    Full Text Available Analiza el papel del editor científico, relaciona las habilidades necesarias para aquellos que anhelan ser editor y reanuda las funciones que él realiza en una revista científica. Revisa los conceptos clave, como editor y editora, edición y proceso editorial. Recuerda la tipología de las editoras, y, sobre todo, muestra que el editor vive la paradoja de responder a las cuestiones culturales del país en que vive (el sueño y asegurar las ganancias por los libros que publica (la supervivencia. Describe el mercado editorial brasileño de las publicaciones científicas, en referencia a los títulos impresos y electrónicos. Destaca la mediación entre el autor y el editor y los dilemas inherentes a la función de generar la producción intelectual (de cualquier naturaleza; la mercantilización creciente de la producción intelectual y científica como producto comercial; la multiplicidad de funciones que la cotidianidad impone al editor; la cuestión cantidad versus calidad de los originales enviados a las revistas científicas. Por último, destaca la importancia del editor de revistas científicas, que garantiza la seguridad, la calidad y el reconocimiento de los títulos publicados y, por lo tanto, de la comunicación científica mediante el cuidado con la calidad de los trabajos científicos.

  14. From The Editor

    OpenAIRE

    Ugur Demiray

    2013-01-01

    Dear TOJDE Readers, Welcome to the Volume 14 Number: 1 of TOJDE! In this issue, 31 articles of 65 authors from 12 different countries around the world have been published. These published articles are arrived to the TOJDE from Australia, Guyana, India, Indonesia, Iran, Malaysia, Nigeria, Russia, Taiwan, Turkey, USA and Zimba bwe. First all, you should know that if a submission picks up from three TOJDE editors between 4.5 and 9 over all 9 credits, it means that this submission can be publish...

  15. From the Editor

    OpenAIRE

    Ugur Demiray

    2009-01-01

    Greetings Dear readers of TOJDE,TOJDE is appeared on your screen now as Volume 10, Number: 4. This is the last issue of the year 2009 and 10th anniversary of TOJDE. In this issue it is published 3 notes for Editor, 13 articles, 4 book reviews. And this time, 33 authors from 13 different countries are placed. These published articles are from Bangladesh, Egypt, India, Iran, KKTC, Lesotho, Lithuania, Malaysia, Pakistan, Romania, United Kingdom, USA and Turkey.“iPhones and Smartphones” has sent ...

  16. EDITORIAL: Editorial from the new Editor-in-Chief for 2014 Editorial from the new Editor-in-Chief for 2014

    Science.gov (United States)

    Graham, W. G.

    2014-02-01

    I am honoured to take on the leadership of Plasma Sources Science and Technology (PSST) as the successor to Professor Mark J Kushner, with whom I have had the pleasure to work on the journal for many years. Under Mark's insightful and energetic leadership over the last six years, PSST has cemented its position as the journal of choice within its subject area and is now one of the most successful journals in the field. In this first issue of 2014, I would like to reflect on some of the events and achievements of 2013. At the start of the year the PSST Editorial Board, recognizing the vital importance of atomic, molecular and optical (AMO) data to low-temperature plasma physics, agreed that PSST would accept papers reporting such new data, generated through both experiment and theory. Jonathan Tennyson joined the Editorial Board to represent this area. In March Anne Bourdon joined the Associate Editor team and has since then played a key part in the journal's review process alongside our other Editors. During the autumn, PSST moved to a new editorial management system. In December Deborah O'Connell was awarded the 2013 Hershkowitz Early Career Award and Review and joins the Editorial Board as of 2014. I would also like to thank Miles Turner for his work in leading the drafting of a guide on the details necessary in the reporting of the results of computer simulations; the main conclusions of this report have been incorporated into the journal policy. Overall 2013 has been another successful year for PSST; paper submissions were up by 8% on the previous year and there was the highest ever number of downloads of PSST papers in one year. Another noteworthy feature of 2013 was the continuing improvement in publication times while maintaining our high standards for acceptance and providing expert feedback coupled with encouragement particularly to younger researchers and groups. Largely as a result of the hard work of our referees and Associate Editors, the average time

  17. The Introductory Psychology Textbook Market: Perceptions of Authors and Editors.

    Science.gov (United States)

    Griggs, Richard A.; Jackson, Sherri L.

    1989-01-01

    Surveys psychology textbook authors and editors on their perceptions of the introductory psychology textbook market. Finds that the textbook market is divided into three levels according to quality, and that authors and editors are not familiar with most textbooks. Notes that the growth of used book companies has adversely affected the market.…

  18. From the Editors

    Directory of Open Access Journals (Sweden)

    Sibel Sakarya

    2017-09-01

    Full Text Available From the Editors Dear readers,We are happy to greet you with the August 2017 issue of our Journal. This issue contains two reports and five original articles. The title of the first report is “Roma Health in Edirne: Social Determinants of Health and Health Status”. In their report, Eskiocak et al. investigate the social determinants of health and their health related outcomes among the Roma communities living in Edirne. The second report deals with gender related issues. Doğan et al. investigate the effects of gender inequality on women's lives through a comparison of countries that do and do not implement policies based on gender equality.Original articles in this issue cover many important public health issues. The first, conducted by Koçak et al., investigates the type 2 diabetes risk of primary school teachers and their lifestyle behaviors. Results of the study show that 5.7% out of 975 primary school teachers have a high risk of type 2 diabetes.The second original article entitled “Unintended pregnancies, induced abortions and risk factors in women admitted to hospitals due to birth or abortion in Hatay” was based on a study of 635 women. The results of this study, done by Savaş et al., show an unintended pregnancy rate of 15%. It is further estimated that almost half of all induced abortions are reported as spontaneous abortions. The third article, which was written by Çam et al., is about the frequency of eating disorders in adolescents. This descriptive study, with the participation of 338 high school students, found the frequency of eating disorder attitudes to be 18.3% among the participants. In a descriptive study conducted by Emerce et al., the knowledge and practice of laboratory safety by laboratory analysts and technicians was investigated. It was found that all 93 laboratory workers who participated in the study have failed in some safety practices throughout their careers, and have been eager to get regular

  19. Optimization and modeling of spot welding parameters with simultaneous multiple response consideration using multi objective Taguchi method and RSM

    Energy Technology Data Exchange (ETDEWEB)

    Muhammad, Nora Siah; Manurung Yupiter HP; Hafidzi, Moham Mad; Abas, Sun Haji Kiyai; Tham, Ghalib; Haru Man, Esa [Universiti Teknologi MARA (UiTM), Selangor (Malaysia)

    2012-08-15

    This paper presents an alternative method to optimize process parameters of resistance spot welding (RSW) towards weld zone development. The optimization approach attempts to consider simultaneously the multiple quality characteristics, namely weld nugget and heat affected zone (HAZ), using multi objective Taguchi method (MTM). The experimental study was conducted for plate thickness of 1.5mm under different welding current, weld time and hold time. The optimum welding parameters were investigated using the Taguchi method with L9 orthogonal array. The optimum value was analyzed by means of MTM, which involved the calculation of total normalized quality loss (TNQL) and multi signal to noise ratio (MSNR). A significant level of the welding parameters was further obtained by using analysis of variance (ANOVA). Furthermore, the first order model for predicting the weld zone development is derived by using response surface methodology (RSM). Based on the experimental confirmation test, the proposed method can be effectively applied to estimate the size of weld zone, which can be used to enhance and optimized the welding performance in RSW or other application.

  20. Optimization and modeling of spot welding parameters with simultaneous multiple response consideration using multi objective Taguchi method and RSM

    International Nuclear Information System (INIS)

    Muhammad, Nora Siah; Manurung Yupiter HP; Hafidzi, Moham Mad; Abas, Sun Haji Kiyai; Tham, Ghalib; Haru Man, Esa

    2012-01-01

    This paper presents an alternative method to optimize process parameters of resistance spot welding (RSW) towards weld zone development. The optimization approach attempts to consider simultaneously the multiple quality characteristics, namely weld nugget and heat affected zone (HAZ), using multi objective Taguchi method (MTM). The experimental study was conducted for plate thickness of 1.5mm under different welding current, weld time and hold time. The optimum welding parameters were investigated using the Taguchi method with L9 orthogonal array. The optimum value was analyzed by means of MTM, which involved the calculation of total normalized quality loss (TNQL) and multi signal to noise ratio (MSNR). A significant level of the welding parameters was further obtained by using analysis of variance (ANOVA). Furthermore, the first order model for predicting the weld zone development is derived by using response surface methodology (RSM). Based on the experimental confirmation test, the proposed method can be effectively applied to estimate the size of weld zone, which can be used to enhance and optimized the welding performance in RSW or other application

  1. Analysis of the results of the first implementation of the Korea Manuscript Editors Certification

    Directory of Open Access Journals (Sweden)

    Hyun Jung Yi

    2017-02-01

    Full Text Available In the field of international scholarly journal publishing, manuscript editing has been established as an essential component of the publication process. As the necessity of this process has increased, the Korean Council of Science Editors has consistently provided education for training professional manuscript editors, and has worked to implement a manuscript editor certification system. Starting in 2014, the Korean Council of Science Editors thoroughly conducted background research and advanced analysis in preparation for such a system. Subsequently, a committee of experts was formed to develop and simulate an examination for this certification. This process culminated in the first manuscript editor certification examination, which was held in November 2016 and resulted in 40 initial Korea Manuscript Editors Certification holders. Examinations for the Korea Manuscript Editors Certification are scheduled to be held annually. The establishment of this certification system will contribute to strengthening individual capacities and further developing science journal publication in Korea by expanding the field of manuscript editing. Ultimately, this system will contribute to the promotion of Korean scientific journals to the level of prominent international journals.

  2. Expectations of an editor in case of an incident

    International Nuclear Information System (INIS)

    Widmer, H.P.

    1997-01-01

    Our major expectations about information of nuclear power station operators are: Truthfulness, comprehensibility, availability and editor's disposal when needed. The information must be clear and true. It has to give an account of the complex facts in which laymen readers fully understand. Editors rely on scientific support and the spokespersons' tolerance for media specific particularities; such as, competition, to be first in information, and time pressure. (orig.) [de

  3. Greetings from the new Editor-in-Chief, Ronald Stambaugh Greetings from the new Editor-in-Chief, Ronald Stambaugh

    Science.gov (United States)

    Stambaugh, Ronald

    2012-04-01

    I am very pleased to join the outstanding leadership team for the journal Nuclear Fusion as Scientific Editor. The journal's high position in the field of fusion energy research derives in no small measure from the efforts of the IAEA team in Vienna, the production and marketing of IOP Publishing, the Board of Editors led by its chairman Mitsuru Kikuchi, the Associate Editor for Inertial Confinement Max Tabak and the outgoing Scientific Editor, Paul Thomas. During Paul's five year tenure submissions have grown by over 40%. The usage of the electronic journal has grown year by year with about 300 000 full text downloads of Nuclear Fusion articles in 2011, an impressive figure due in part to the launch of the full 50 year archive. High quality has been maintained while times for peer review and publishing have been reduced and the journal achieved some of the highest impact factors ever (as high as 4.27). The journal has contributed greatly to building the international scientific basis for fusion. I was privileged to serve from 2003 to 2010 as chairman of the Coordinating Committee for the International Tokamak Physics Activity (ITPA) which published in Nuclear Fusion the first ITER Physics Basis (1999) and its later update (2007). The scientific basis that has been developed to date for fusion has led to the construction of major facilities to demonstrate the production of power-plant relevant levels of fusion reactions. We look forward to the journal continuing to play a key role in the international effort toward fusion energy as these exciting major facilities and the various approaches to fusion continue to be developed. It is clear that Nuclear Fusion maintains its position in the field because of the perceived high quality of the submissions, the refereeing and the editorial processes, and the availability and utility of the online journal. The creation of the Nuclear Fusion Prize, led by the Board of Editors chairman Mitsuru Kikuchi, for the most outstanding

  4. From the Editor

    OpenAIRE

    Ugur Demiray

    2006-01-01

    Greetings Dear readers of TOJDE, I am pleased to inform you that in the 7th year of TOJDE is appeared on your screen now as Volume 7, Number: 3. Very much thanks to all of you once more that we met with you 23rd time, since January 2000. In this issue we published one notes for Editor 15 articles like in this issue, three book reviews, news and announcements for our readers. 25 authors from eight different countries are pleaced in this issue. These published articles are from...

  5. From the Editor

    OpenAIRE

    Ugur Demiray

    2006-01-01

    Greetings Dear readers of TOJDE, I am pleased to inform you that in the 7th year of TOJDE is appeared on your screen now as Volume 7, Number: 4. Very much thanks to all of you and TOJDE editorial members once more that we managed to publish TOJDE 25th time, since January 2000. In this issue we published one notes for Editor, 13 articles, two reviews, news and announcements for our readers. 20 authors from seven different countries are placed in this issue. These published articles are from Ba...

  6. Core competencies for scientific editors of biomedical journals: consensus statement.

    Science.gov (United States)

    Moher, David; Galipeau, James; Alam, Sabina; Barbour, Virginia; Bartolomeos, Kidist; Baskin, Patricia; Bell-Syer, Sally; Cobey, Kelly D; Chan, Leighton; Clark, Jocalyn; Deeks, Jonathan; Flanagin, Annette; Garner, Paul; Glenny, Anne-Marie; Groves, Trish; Gurusamy, Kurinchi; Habibzadeh, Farrokh; Jewell-Thomas, Stefanie; Kelsall, Diane; Lapeña, José Florencio; MacLehose, Harriet; Marusic, Ana; McKenzie, Joanne E; Shah, Jay; Shamseer, Larissa; Straus, Sharon; Tugwell, Peter; Wager, Elizabeth; Winker, Margaret; Zhaori, Getu

    2017-09-11

    Scientific editors are responsible for deciding which articles to publish in their journals. However, we have not found documentation of their required knowledge, skills, and characteristics, or the existence of any formal core competencies for this role. We describe the development of a minimum set of core competencies for scientific editors of biomedical journals. The 14 key core competencies are divided into three major areas, and each competency has a list of associated elements or descriptions of more specific knowledge, skills, and characteristics that contribute to its fulfillment. We believe that these core competencies are a baseline of the knowledge, skills, and characteristics needed to perform competently the duties of a scientific editor at a biomedical journal.

  7. Letter from the Editors

    Directory of Open Access Journals (Sweden)

    Jamie Allen

    2013-05-01

    Full Text Available With grateful hearts we offer this, the fourth issue of our second volume. The result of months of back-breaking thinking, emailing, looking, clicking, watching, writing and reading, our winter issue is here. The editors could not have done this without your support. We welcome your materials for our future issues as well as your continued contributions. Purchase your copy of our first book from Punctum Books.

  8. Optimization of Surface Roughness Parameters of Al-6351 Alloy in EDC Process: A Taguchi Coupled Fuzzy Logic Approach

    Science.gov (United States)

    Kar, Siddhartha; Chakraborty, Sujoy; Dey, Vidyut; Ghosh, Subrata Kumar

    2017-10-01

    This paper investigates the application of Taguchi method with fuzzy logic for multi objective optimization of roughness parameters in electro discharge coating process of Al-6351 alloy with powder metallurgical compacted SiC/Cu tool. A Taguchi L16 orthogonal array was employed to investigate the roughness parameters by varying tool parameters like composition and compaction load and electro discharge machining parameters like pulse-on time and peak current. Crucial roughness parameters like Centre line average roughness, Average maximum height of the profile and Mean spacing of local peaks of the profile were measured on the coated specimen. The signal to noise ratios were fuzzified to optimize the roughness parameters through a single comprehensive output measure (COM). Best COM obtained with lower values of compaction load, pulse-on time and current and 30:70 (SiC:Cu) composition of tool. Analysis of variance is carried out and a significant COM model is observed with peak current yielding highest contribution followed by pulse-on time, compaction load and composition. The deposited layer is characterised by X-Ray Diffraction analysis which confirmed the presence of tool materials on the work piece surface.

  9. Supplier Selection for Food Industry: A Combination of Taguchi Loss Function and Fuzzy Analytical Hierarchy Process

    OpenAIRE

    Renna Magdalena

    2012-01-01

    Supplier selection is an important part of supply chain management process by which firms identify, evaluate, and establish contracts with suppliers. Deciding the right supplier can be a complex task. As such, various criteria must be taken into account to choose the best supplier. This study focused on the supply in the packaging division of a food industry in Denpasar-Bali. A combination of Taguchi Loss Function and fuzzy-AHP (Analytical Hierarchy Process Fuzzy Linear Programming) was used ...

  10. Taguchi Method for Development of Mass Flow Rate Correlation Using Hydrocarbon Refrigerant Mixture in Capillary Tube

    OpenAIRE

    Sulaimon, Shodiya; Nasution, Henry; Aziz, Azhar Abdul; Abdul-Rahman, Abdul-Halim; Darus, Amer N

    2014-01-01

    The capillary tube is an important control device used in small vapor compression refrigeration systems such as window air-conditioners, household refrigerators and freezers. This paper develops a non-dimensional correlation based on the test results of the adiabatic capillary tube for the mass flow rate through the tube using a hydrocarbon refrigerant mixture of 89.3% propane and 10.7% butane (HCM). The Taguchi method, a statistical experimental design approach, was employed. This approach e...

  11. Statement on Publication Ethics for Editors and Publishers

    Science.gov (United States)

    2016-01-01

    The digitization and related developments in journal editing and publishing necessitate increasing the awareness of all stakeholders of science communication in the emerging global problems and possible solutions. Journal editors and publishers are frequently encountered with the fast-growing problems of authorship, conflicts of interest, peer review, research misconduct, unethical citations, and inappropriate journal impact metrics. While the number of erroneous and unethical research papers and wasteful, or 'predatory', journals is increasing exponentially, responsible editors are urged to 'clean' the literature by correcting or retracting related articles. Indexers are advised to implement measures for accepting truly influential and ethical journals and delisting sources with predatory publishing practices. Updating knowledge and skills of authors, editors and publishers, developing and endorsing recommendations of global editorial associations, and (re)drafting journal instructions can be viewed as potential tools for improving ethics of academic journals. The aim of this Statement is to increase awareness of all stakeholders of science communication of the emerging ethical issues in journal editing and publishing and initiate a campaign of upgrading and enforcing related journal instructions. PMID:27510376

  12. Response to Taguchi and Noma on "relationship between directionality and orientation in drawings by young children and adults.

    Science.gov (United States)

    Karev, George B

    2006-02-01

    When assessing the relationship between direction and orientation in drawings by young children and adults, Taguchi and Noma used a fish-drawing task. However, the fish is not convenient enough as an object for such a task so it is highly preferable to use, instead of a single object, a set of several objects to assess directionality quantitatively. These authors' conclusions do not acknowledge alternative explanations.

  13. Medical Editors Trial Amnesty (META)

    African Journals Online (AJOL)

    may change jobs, with the result that important work remains unfinished; or investigators may discover a recently published trial on the same topic and conclude that their own results are now redundant. Editors must also take some responsibility. There is a limit to the number of reports we can publish and sometimes we are ...

  14. Editor\\'s welcome

    Directory of Open Access Journals (Sweden)

    Hassan Mozaffari-Khosravi

    2016-10-01

    Full Text Available Food and Nutrition Security (FNS has an evolving nature and during the last decades its theoretical, conceptual, structural, practical and programmatic notions evolved significantly and approaches toward food and nutrition have changed drastically. Now, more than ever before, the issue is considered as a fundamental component of sustainable development globally. For a better grasp of the complexities of the field, we need to remind ourselves that “nutrition” as science has a history of more than 100 years while nutrition as a “factor” in “National development” has a history of around fifty years. Considering distinct levels of development status in different contexts, FNS pattern is non-monotonic even in one country. Accordingly, struggling against food and nutrition insecurity is very thought to deal with and multi disciplinary and multi sectorial approaches should be applied. Providing robust evidences to feed policy making processes is one of the main prerequisites for evidence informed policy making and repositioning nutrition as central to sustainable development. This is a professional duty of scholars in different sectors engaging with human development. The journal of Nutrition and Food Security (JNFS as a new journal in the field of food and nutrition security is trying to provide an excellent opportunity for researchers and scholars to publish their original works on approaches, challenges and solutions of food and nutrition hoping to provide data for decision makers to better design interventional programs aiming to eradicate food and nutrition insecurity. Editor in chief H. Mozaffari-Khosravi 22 Sep 2016

  15. R. E. (Ted) Munn — Founding editor; a mini-biography

    Science.gov (United States)

    Taylor, Peter; Thomas, Morley; Truhlar, Ed; Whelpdale, Doug

    1996-02-01

    Ted Munn founded Boundary-Layer Meteorology in 1970 and served as Editor for 75 volumes over a 25 year period. This short article briefly reviews Ted's scientific career with the Atmospheric Environment Service (of Canada), the International Institute for Applied Systems Analysis in Austria and with the Institute of Environmental Studies at the University of Toronto, and as editor of this journal.

  16. Taguchi-generalized regression neural network micro-screening for physical and sensory characteristics of bread.

    Science.gov (United States)

    Besseris, George J

    2018-03-01

    Generalized regression neural networks (GRNN) may act as crowdsourcing cognitive agents to screen small, dense and complex datasets. The concurrent screening and optimization of several complex physical and sensory traits of bread is developed using a structured Taguchi-type micro-mining technique. A novel product outlook is offered to industrial operations to cover separate aspects of smart product design, engineering and marketing. Four controlling factors were selected to be modulated directly on a modern production line: 1) the dough weight, 2) the proofing time, 3) the baking time, and 4) the oven zone temperatures. Concentrated experimental recipes were programmed using the Taguchi-type L 9 (3 4 ) OA-sampler to detect potentially non-linear multi-response tendencies. The fused behavior of the master-ranked bread characteristics behavior was smart sampled with GRNN-crowdsourcing and robust analysis. It was found that the combination of the oven zone temperatures to play a highly influential role in all investigated scenarios. Moreover, the oven zone temperatures and the dough weight appeared to be instrumental when attempting to synchronously adjusting all four physical characteristics. The optimal oven-zone temperature setting for concurrent screening-and-optimization was found to be 270-240 °C. The optimized (median) responses for loaf weight, moisture, height, width, color, flavor, crumb structure, softness, and elasticity are: 782 g, 34.8 %, 9.36 cm, 10.41 cm, 6.6, 7.2, 7.6, 7.3, and 7.0, respectively.

  17. Taguchi-generalized regression neural network micro-screening for physical and sensory characteristics of bread

    Directory of Open Access Journals (Sweden)

    George J. Besseris

    2018-03-01

    Full Text Available Generalized regression neural networks (GRNN may act as crowdsourcing cognitive agents to screen small, dense and complex datasets. The concurrent screening and optimization of several complex physical and sensory traits of bread is developed using a structured Taguchi-type micro-mining technique. A novel product outlook is offered to industrial operations to cover separate aspects of smart product design, engineering and marketing. Four controlling factors were selected to be modulated directly on a modern production line: 1 the dough weight, 2 the proofing time, 3 the baking time, and 4 the oven zone temperatures. Concentrated experimental recipes were programmed using the Taguchi-type L9(34 OA-sampler to detect potentially non-linear multi-response tendencies. The fused behavior of the master-ranked bread characteristics behavior was smart sampled with GRNN-crowdsourcing and robust analysis. It was found that the combination of the oven zone temperatures to play a highly influential role in all investigated scenarios. Moreover, the oven zone temperatures and the dough weight appeared to be instrumental when attempting to synchronously adjusting all four physical characteristics. The optimal oven-zone temperature setting for concurrent screening-and-optimization was found to be 270–240 °C. The optimized (median responses for loaf weight, moisture, height, width, color, flavor, crumb structure, softness, and elasticity are: 782 g, 34.8 %, 9.36 cm, 10.41 cm, 6.6, 7.2, 7.6, 7.3, and 7.0, respectively. Keywords: Industrial engineering, Food science

  18. Special issues as criterion for journal quality evaluation: Letter to editor

    Directory of Open Access Journals (Sweden)

    Dadkhah Mehdi

    2015-01-01

    Full Text Available Predatory publishers are defined as publishers who have financial goals. This definition was introduced for the first time by Jeffrey Beall (2012. In some predatory publishers, we can find some papers that are not related to journal's aim and scope. These journals create special issues in order to publish papers that are not related to journal's aim and scope. Thus, we are faced with a question of how the editor of these journals could evaluate these papers. In some trusted journals, editor invites guest editors for special issues, which are related to journal's aim and scope. On the other hand predatory publishers, publish papers without any external reviewers or guest editors. In addition, some journals that publish irrelevant papers in regular issues are also found. This problem can be seen especially in some biological or life science journals. It seems that these problems pose new challenge for the academic world.

  19. A model-driven development approach for learning design using the LPCEL Editor

    Directory of Open Access Journals (Sweden)

    Jorge Torres

    2014-01-01

    Full Text Available Complex learning scenarios are represented using Educational Modeling Languages (EMLs. Different people with specific skills usually design these scenarios. The IMS LD is a commonly used EML for which some visual editors are being created in order to assist the authoring process. However, these editors have a limited level of expressiveness and do not provide the facilities for designers to collaborate in the design process. The LPCEL Editor provides a broad level of expressiveness and facilitates the authoring process with an editor that includes: (1 Visual Elements, (2 Intermediate Representation, (3 Learning Patterns, (4 Collaboration tools and (5 Web Services. In order to verify that the components are sufficient, we conducted a user evaluation to analyze their perspective regarding the level of functionality of the tools.

  20. Friction stir welding: multi-response optimisation using Taguchi-based GRA

    Directory of Open Access Journals (Sweden)

    Jitender Kundu

    2016-01-01

    Full Text Available In present experimental work, friction stir welding of aluminium alloy 5083- H321 is performed for optimisation of process parameters for maximum tensile strength. Taguchi’s L9 orthogonal array has been used for three parameters – tool rotational speed (TRS, traverse speed (TS, and tool tilt angle (TTA with three levels. Multi-response optimisation has been carried out through Taguchi-based grey relational analysis. The grey relational grade has been calculated for all three responses – ultimate tensile strength, percentage elongation, and micro-hardness. Analysis of variance is the tool used for obtaining grey relational grade to find out the significant process parameters. TRS and TS are the two most significant parameters which influence most of the quality characteristics of friction stir welded joint. Validation of predicted values done through confirmation experiments at optimum setting shows a good agreement with experimental values.

  1. Survey Research in the Forest Science Journals - Insights from Journal Editors

    Directory of Open Access Journals (Sweden)

    Mirjana Stevanov

    2015-06-01

    Full Text Available Background and Purpose: Survey research is one of the most commonly applied approaches in the social sciences. In the forest research it has been used for more than five decades. In spite of that or the fact that the amount of survey-based articles in the forest science journals has increased during the last decade, their share in all articles published in 20 forest science journals (9,372 articles, 2005-2014 is quite modest (3.2%. In our paper we look at the opinions and attitudes of forest science journal editors towards survey research, as their perspective might enlarge our understanding of the use of this approach in the field of forestry. Materials and Methods: We selected 20 forest science journals - 15 from the SCI list and five non-SCI journals and contacted editors of these journals with the self-administered e-mail questionnaire. Data were collected in October 2014 and analyzed by descriptive statistics. The overall response rate was 75%. The assumptions for the study were based on the evidence addressing opinions and attitudes of journal editors from other research fields (finance since no similar study was found in the field of forestry. Results: The majority of editors reported the same review process for survey-based articles as for all others. In two journals, articles with the survey-based content are screened more rigorously and in two journals their publishing is generally discouraged. 40% of journal editors hold the view that no difference should be made between survey research and other types of original research, and another 40% think that survey research should in the first place play a complementary role. As the main strength of survey research editors see the possibility to obtain data unavailable from other sources. They perceive adverse selection and the difficulty to generalize results as the main weaknesses. Conclusions: Editors of forest science journals have similar opinion on survey research as those from the

  2. Four are named Editors of Earth Interactions

    Science.gov (United States)

    Eric J. Barron of the Earth System Science Center at The Pennsylvania State University has been named chief editor of the new electronic journal, Earth Interactions. This journal will be co-published by AGU, the American Meteorological Society, and the Association of American Geographers. The three societies jointly agreed on the appointment of Barron. Each of the societies also appointed an editor to the board. George F. Hepner for AAG is from the Department of Geography at the University of Utah, David T. Sandwell for AGU is at the Institute of Geophysics and Planetary Physics at Scripps Institution of Oceanography, and Kevin E. Trenberth for AMS is at the Climate and Global Dynamics Division at the National Center for Atmospheric Research.

  3. Handing Over the ATLAS eNews Scientific Editor Task

    CERN Multimedia

    P. Jenni

    2006-01-01

    The ATLAS eNews are now established since many years as a lively source of stories about the construction of our detector as well as the preparations for the physics running to come. The human touch in telling these stories is important, and to stimulate and motivate the article writers to include also this side of our work is one of the tasks for the Scientific Editor of the eNews. Joleen ('Jo') Pater has been the enthusiastic and competent 'skipper' for the last two years keeping the eNews on track. The whole Collaboration owes her a great and very hearty thank-you! Pauline Gagnon has kindly accepted to take up the challenge for the next couple of years. She will have the privilege to be the editor when we will see the first collisions with ATLAS! I wish her all the best for this new task. Outgoing and incoming editors of the ATLAS E-news: Jo Pater (left) and Pauline Gagnon (right)

  4. 29 CFR 793.11 - Combination announcer, news editor and chief engineer.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Combination announcer, news editor and chief engineer. 793... OF CERTAIN RADIO AND TELEVISION STATION EMPLOYEES FROM OVERTIME PAY REQUIREMENTS UNDER SECTION 13(b... editor and chief engineer. The 13(b)(9) exemption, as was made clear during the debate on the amendment...

  5. Surface Roughness of Al-5Cu Alloy using a Taguchi-Fuzzy Based Approach

    Directory of Open Access Journals (Sweden)

    Biswajit Das

    2014-07-01

    Full Text Available The present paper investigates the application of traditional Taguchi method with fuzzy logic for multi objective optimization of the turning process of Al-5Cu alloy in CNC Lathe machine. The cutting parameters are optimized with considerations of the multiple surface roughness characteristics (Centre line average roughness Ra, Average maximum height of the profile Rz, Maximum height of the profile Rt, Mean spacing of local peaks of the profile Sa . Experimental results are demonstrated to present the effectiveness of this approach. The parameters used in the experiment were cutting speed, depth of cut, feed rate. Other parameters such as tool nose radius, tool material, workpiece length, workpiece diameter, and workpiece material were taken as constant.

  6. Experimental Validation for Hot Stamping Process by Using Taguchi Method

    Science.gov (United States)

    Fawzi Zamri, Mohd; Lim, Syh Kai; Razlan Yusoff, Ahmad

    2016-02-01

    Due to the demand for reduction in gas emissions, energy saving and producing safer vehicles has driven the development of Ultra High Strength Steel (UHSS) material. To strengthen UHSS material such as boron steel, it needed to undergo a process of hot stamping for heating at certain temperature and time. In this paper, Taguchi method is applied to determine the appropriate parameter of thickness, heating temperature and heating time to achieve optimum strength of boron steel. The experiment is conducted by using flat square shape of hot stamping tool with tensile dog bone as a blank product. Then, the value of tensile strength and hardness is measured as response. The results showed that the lower thickness, higher heating temperature and heating time give the higher strength and hardness for the final product. In conclusion, boron steel blank are able to achieve up to 1200 MPa tensile strength and 650 HV of hardness.

  7. Thanks to outgoing Associate Editors

    Science.gov (United States)

    Lichti, Derek D.; Weng, Qihao

    2018-04-01

    As of the end of December 2017, Professors Eberhard Gülch, Olaf Hellwich, Minho Kim, and Lalit Kumar have retired as Associate Editors of the ISPRS Journal of Photogrammetry and Remote Sensing. Our Journal's readership has benefited greatly from their longstanding commitment to their editorial duties. Both Profs. Gülch and Hellwich began their service to the Journal in 2007, while Profs. Kumar and Kim began in 2012 and 2014, respectively. In their many years as editors, they have witnessed the incredible growth of the Journal in terms of the number of papers submitted and published as well as the impact factor. Thanks to their high standards for paper quality and rigorous peer review, these professors have been important contributors to the Journal's current high standing. They were very versatile in terms of the scope of papers they could handle. Eberhard handled papers in photogrammetry, terrain modelling and geographic information systems (GIS) while Olaf handled papers in radar, computer vision and GIS. Both Lalit and Minho handled papers in optical remote sensing. On behalf of the Journal and the International Society for Photogrammetry and Remote Sensing, we thank them for many years of dedicated service to the Journal.

  8. Carta del Editor

    OpenAIRE

    Luis Eladio Proaño

    2015-01-01

    Henos aquí con un nuevo número de RIESED. Después de casi un año de ver la luz, y como lo anticipábamos en la carta del editor que acompañaba al número fundacional, hacer una revista electrónica no ha sido una tarea sencilla. Un año más tarde no podemos sino confirmar esa opinión.Gracias al decidido trabajo de los autores, revisores y miembros del equipo editorial hemos podido hacerlo. El proceso de revisión de los artículos ha merecido un cuidado, dedicación y tiempo especiales, que hicieron...

  9. The optimal parameter design for a welding unit of manufacturing industry by Taguchi method and computer simulation

    Energy Technology Data Exchange (ETDEWEB)

    Zahraee, S.M.; Chegeni, A.; Toghtamish, A.

    2016-07-01

    Manufacturing systems include a complicated combination of resources, such as materials, labors, and machines. Hence, when the manufacturing systems are faced with a problem related to the availability of resources it is difficult to identify the root of the problem accurately and effectively. Managers and engineers in companies are trying to achieve a robust production line based on the maximum productivity. The main goal of this paper is to design a robust production line, taking productivity into account in the selected manufacturing industry. This paper presents the application of Taguchi method along with computer simulation for finding an optimum factor setting for three controllable factors, which are a number of welding machines, hydraulic machines, and cutting machines by analyzing the effect of noise factors in a selected manufacturing industry. Based on the final results, the optimal design parameter of welding unit of in the selected manufacturing industry will be obtained when factor A is located at level 2 and B and C are located at level 1. Therefore, maximum productive desirability is achieved when the number of welding machines, hydraulic machines, and cutting machines is equal to 17, 2, and 1, respectively. This paper has a significant role in designing a robust production line by considering the lowest cost and timely manner based on the Taguchi method. (Author)

  10. The optimal parameter design for a welding unit of manufacturing industry by Taguchi method and computer simulation

    Directory of Open Access Journals (Sweden)

    Seyed Mojib Zahraee

    2016-05-01

    Full Text Available Purpose: Manufacturing systems include a complicated combination of resources, such as materials, labors, and machines. Hence, when the manufacturing systems are faced with a problem related to the availability of resources it is difficult to identify the root of the problem accurately and effectively. Managers and engineers in companies are trying to achieve a robust production line based on the maximum productivity. The main goal of this paper is to design a robust production line, taking productivity into account in the selected manufacturing industry. Design/methodology/approach: This paper presents the application of Taguchi method along with computer simulation for finding an optimum factor setting for three controllable factors, which are a number of welding machines, hydraulic machines, and cutting machines by analyzing the effect of noise factors in a selected manufacturing industry. Findings and Originality/value: Based on the final results, the optimal design parameter of welding unit of in the selected manufacturing industry will be obtained when factor A is located at level 2 and B and C are located at level 1. Therefore, maximum productive desirability is achieved when the number of welding machines, hydraulic machines, and cutting machines is equal to 17, 2, and 1, respectively. This paper has a significant role in designing a robust production line by considering the lowest cost and timely manner based on the Taguchi method.

  11. Mechanical and thermal properties optimization of a synthetic agglomerate by using the Taguchi Method Optimización de propiedades mecánicas y térmicas de un aglomerado sintético por el Método de Taguchi

    Directory of Open Access Journals (Sweden)

    C. M. Bedoya–Hincapié

    2009-12-01

    Full Text Available In this work, the experimental design of Taguchi model was applied in order to obtain the most appropriate parameters to elaborate an agglomerate material which presents a good mechanical and thermal behavior. The raw materials used were rice husk, common clay, sand and aloe gel. The importance of the development of the synthetic agglomerates is in the use of agricultural wastes to give them an useful employment when replacing materials of great demand. The experimental combinations were done varying the control factors values: rice husk percentage (R, temperature (T and thermal treatment time(t. Via to the optimization properties according Taguchi’s Methodology, the elasticity modulus, the absorbed energy in the impact, break maximum module and initial decomposition temperature to each experimental combination were selected. The Qualitek-4 software was used below the biggest the better quality characteristic. The optimum parameters obtained to each control level were: R = 15%, T = 120oC and t = 3 h. These results were confirmed with a new experiment, where similar properties to the wood species were obtained. The developing of this will be useful as substitute of the wood and could improve the environment impact due residual materials.En este trabajo se aplicó el modelo de Diseño Experimental de Taguchi para la optimización de las propiedades mecánicas y térmicas de un material compuesto aglomerado y obtener los parámetros más adecuados para su elaboración. La importancia del desarrollo de los aglomerados sintéticos está en el uso de desechos agrícolas para darle un empleo útil al suplir materiales de gran demanda. Se utilizaron la cáscara de arroz, arcilla, arena y gel de aloe como materias primas. Con la variación de los valores de los factores de control: porcentaje de cáscara de arroz (R, temperatura (T y tiempo de tratamiento térmico (t, se realizaron las diferentes combinaciones experimentales. Para la optimización de

  12. Application of Taguchi optimization on the cassava starch wastewater electrocoagulation using batch recycle method

    Science.gov (United States)

    Sudibyo, Hermida, L.; Suwardi

    2017-11-01

    Tapioca waste water is very difficult to treat; hence many tapioca factories could not treat it well. One of method which able to overcome this problem is electrodeposition. This process has high performance when it conducted using batch recycle process and use aluminum bipolar electrode. However, the optimum operation conditions are having a significant effect in the tapioca wastewater treatment using bath recycle process. In this research, The Taguchi method was successfully applied to know the optimum condition and the interaction between parameters in electrocoagulation process. The results show that current density, conductivity, electrode distance, and pH have a significant effect on the turbidity removal of cassava starch waste water.

  13. Investigation of the possibility of copper removal from industrial leachate by raw and calcined phosphogypsum: D-optimal and Taguchi designs

    International Nuclear Information System (INIS)

    Mesci, Basak; Turan, Nurdan Gamze; Ozgonenel, Okan

    2012-01-01

    In the present study, the removal of Cu(II) was evaluated by raw and calcined phosphogypsum (PG) as an industrial product. The role of experimental factors on the removal of Cu(II) was examined by using D-optimal and Taguchi designs. The experimental factors and their related levels were selected as initial pH of 3-6-8, adsorbent content of 5, 10, and 25 g L -1 , contact time of 5, 10, and 20 min, and temperature of 20, 40, and 60 C. The results are evaluated by ANOVA test to extract important experimental factors and their levels. The performances of the suggested factorial designs were then compared and regression models that took into account the significant main and interaction effects were suggested. Taguchi design was found as a reliable solution with less number of experiments for adsorption studies with the optimized values. The resultant removal efficiency is calculated as 78.34%. The results revealed that calcined PG is an appropriate adsorbent for Cu(II) removal from leachate of industrial waste. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  14. The graphics editor in ROOT

    International Nuclear Information System (INIS)

    Antcheva, Ilka; Brun, Rene; Hof, Carsten; Rademakers, Fons

    2006-01-01

    A well-designed Graphical User Interface (GUI) has critical importance in any computer application. The user interface is where the end users and the complex system intersect. An effective interface design can make a powerful and complex system, such as ROOT, easy and intuitive to learn and operate. This paper describes the main goals we defined and the design solution we found developing the graphics editor in ROOT

  15. The XML Metadata Editor of GFZ Data Services

    Science.gov (United States)

    Ulbricht, Damian; Elger, Kirsten; Tesei, Telemaco; Trippanera, Daniele

    2017-04-01

    Following the FAIR data principles, research data should be Findable, Accessible, Interoperable and Reuseable. Publishing data under these principles requires to assign persistent identifiers to the data and to generate rich machine-actionable metadata. To increase the interoperability, metadata should include shared vocabularies and crosslink the newly published (meta)data and related material. However, structured metadata formats tend to be complex and are not intended to be generated by individual scientists. Software solutions are needed that support scientists in providing metadata describing their data. To facilitate data publication activities of 'GFZ Data Services', we programmed an XML metadata editor that assists scientists to create metadata in different schemata popular in the earth sciences (ISO19115, DIF, DataCite), while being at the same time usable by and understandable for scientists. Emphasis is placed on removing barriers, in particular the editor is publicly available on the internet without registration [1] and the scientists are not requested to provide information that may be generated automatically (e.g. the URL of a specific licence or the contact information of the metadata distributor). Metadata are stored in browser cookies and a copy can be saved to the local hard disk. To improve usability, form fields are translated into the scientific language, e.g. 'creators' of the DataCite schema are called 'authors'. To assist filling in the form, we make use of drop down menus for small vocabulary lists and offer a search facility for large thesauri. Explanations to form fields and definitions of vocabulary terms are provided in pop-up windows and a full documentation is available for download via the help menu. In addition, multiple geospatial references can be entered via an interactive mapping tool, which helps to minimize problems with different conventions to provide latitudes and longitudes. Currently, we are extending the metadata editor

  16. Transparent Model Transformation: Turning Your Favourite Model Editor into a Transformation Tool

    DEFF Research Database (Denmark)

    Acretoaie, Vlad; Störrle, Harald; Strüber, Daniel

    2015-01-01

    Current model transformation languages are supported by dedicated editors, often closely coupled to a single execution engine. We introduce Transparent Model Transformation, a paradigm enabling modelers to specify transformations using a familiar tool: their model editor. We also present VMTL, th...... model transformation tool sharing the model editor’s benefits, transparently....

  17. Correction of β-thalassemia mutant by base editor in human embryos

    Directory of Open Access Journals (Sweden)

    Puping Liang

    2017-09-01

    Full Text Available Abstract β-Thalassemia is a global health issue, caused by mutations in the HBB gene. Among these mutations, HBB −28 (A>G mutations is one of the three most common mutations in China and Southeast Asia patients with β-thalassemia. Correcting this mutation in human embryos may prevent the disease being passed onto future generations and cure anemia. Here we report the first study using base editor (BE system to correct disease mutant in human embryos. Firstly, we produced a 293T cell line with an exogenous HBB −28 (A>G mutant fragment for gRNAs and targeting efficiency evaluation. Then we collected primary skin fibroblast cells from a β-thalassemia patient with HBB −28 (A>G homozygous mutation. Data showed that base editor could precisely correct HBB −28 (A>G mutation in the patient’s primary cells. To model homozygous mutation disease embryos, we constructed nuclear transfer embryos by fusing the lymphocyte or skin fibroblast cells with enucleated in vitro matured (IVM oocytes. Notably, the gene correction efficiency was over 23.0% in these embryos by base editor. Although these embryos were still mosaic, the percentage of repaired blastomeres was over 20.0%. In addition, we found that base editor variants, with narrowed deamination window, could promote G-to-A conversion at HBB −28 site precisely in human embryos. Collectively, this study demonstrated the feasibility of curing genetic disease in human somatic cells and embryos by base editor system.

  18. Nitric acid treated multi-walled carbon nanotubes optimized by Taguchi method

    Energy Technology Data Exchange (ETDEWEB)

    Shamsuddin, Shahidah Arina; Hashim, Uda; Halim, Nur Hamidah Abdul [Institute of Nano Electronic Engineering, Universiti Malaysia Perlis, 01000, Kangar, Perlis (Malaysia); Derman, Mohd Nazree, E-mail: nazree@unimap.edu.my; Tahir, Muhammad Faheem Mohd [Centre of Excellence Geopolymer & Green Technology (CEGeoGTech), School of Material Engineering, Universiti Malaysia Perlis, 01000, Kangar, Perlis (Malaysia); Kashif, Muhammad [Faculty of Engineering, Universiti Malaysia Sarawak, 94300, Kota Samarahan, Sarawak (Malaysia); Adam, Tijjani [Faculty of Engineering Technology, Universiti Malaysia Perlis, 02100, Padang Besar, Perlis (Malaysia)

    2016-07-19

    Electron transfer rate (ETR) of CNTs can be enhanced by increasing the amounts of COOH groups to their wall and opened tips. With the aim to achieve the highest production amount of COOH, Taguchi robust design has been used for the first time to optimize the surface modification of MWCNTs by nitric acid oxidation. Three main oxidation parameters which are concentration of acid, treatment temperature and treatment time have been selected as the control factors that will be optimized. The amounts of COOH produced are measured by using FTIR spectroscopy through the absorbance intensity. From the analysis, we found that acid concentration and treatment time had the most important influence on the production of COOH. Meanwhile, the treatment temperature will only give intermediate effect. The optimum amount of COOH can be achieved with the treatment by 8.0 M concentration of nitric acid at 120 °C for 2 hour.

  19. Nitric acid treated multi-walled carbon nanotubes optimized by Taguchi method

    International Nuclear Information System (INIS)

    Shamsuddin, Shahidah Arina; Hashim, Uda; Halim, Nur Hamidah Abdul; Derman, Mohd Nazree; Tahir, Muhammad Faheem Mohd; Kashif, Muhammad; Adam, Tijjani

    2016-01-01

    Electron transfer rate (ETR) of CNTs can be enhanced by increasing the amounts of COOH groups to their wall and opened tips. With the aim to achieve the highest production amount of COOH, Taguchi robust design has been used for the first time to optimize the surface modification of MWCNTs by nitric acid oxidation. Three main oxidation parameters which are concentration of acid, treatment temperature and treatment time have been selected as the control factors that will be optimized. The amounts of COOH produced are measured by using FTIR spectroscopy through the absorbance intensity. From the analysis, we found that acid concentration and treatment time had the most important influence on the production of COOH. Meanwhile, the treatment temperature will only give intermediate effect. The optimum amount of COOH can be achieved with the treatment by 8.0 M concentration of nitric acid at 120 °C for 2 hour.

  20. Back-pressure Forging Using a Servo Press

    OpenAIRE

    河本, 基一郎; Kawamoto, Kiichiro

    2015-01-01

    博士論文要旨Abstract 以下に掲載:International Journal of Automation Technology 9(2) pp.184-192 2015. Fuji Technology Press Ltd. 共著者:Kiichiro Kawamoto, Takeshi Yoneyama, Masato Okada

  1. Método Taguchi para optimizar marcadores RAPD-PCR y determinar diversidad genética: un modelo, la tortuga cabezona Caretta caretta (Testudines: Cheloniidae

    Directory of Open Access Journals (Sweden)

    Julio Martínez-Ortega

    2013-06-01

    Full Text Available Implementation of Taguchi method to optimize RAPD-PCR Markers for determining the genetic diversity: an example the loggerhead turtle, Caretta caretta (Testudines:Cheloniidae. DNA was isolated from Caretta caretta two zone of the Colombian Caribbean (Don Diego N=5 and Rosario Islands N=3 and quantified it. Was applied a Taguchi orthogonal matriz of four variables to standardize RAPD-PCR reaction. The data were analyzed with the program PopGen. The conditions were standardized to 7.85 ng/ml of DNA, 3.5 mM MgCl2, 200 mM dNTP's, 0.5 mM oligonucleotide and one unit of Taq DNA polymerase in a final reaction volume of 20 ml. Thermocycling conditions initiated at 94°C for 5 min, followed by 40 cycles of: 94°C for 40 s, 37°C for 40 s and 72°C for 90 s. The markers were recorded in a binary matrix of presence (1 and absence (0, and as a model example of genetic diversity was determined using the Shannon index (H '= 0.44 + / -0.27 individuals and Don Diego H '= 0.25 + / -0.32 for Isla del Rosario, the average rate of genetic structure (Gst=0.27 and the effective migration rate (Nm=1.28. Methodology was standardized using Taguchi method that produces bands of light, legible and reproducible that can be used as a reliable alternative for studies of genetic diversity in the loggerhead turtle and other species, and further, integrate them into the curriculum of molecular biology and/or biochemistry for undergraduate and graduate students.

  2. An Interview with Masoud Yazdani, editor of London-based Intellect Books

    Directory of Open Access Journals (Sweden)

    Sean Scanlan

    2014-03-01

    Full Text Available Sean Scanlan conducted an email interview with Masoud Yazdani, the editor of Intellect Books, an independent academic publisher in the fields of creative practice and popular culture, whose aim is to publish scholarly books and journals that provide a vital space for widening critical debate in new and emerging subjects. An Interview with Masoud Yazdani, editor of London-based Intellect Books by Sean Scanlan.

  3. An international survey and modified Delphi process revealed editors' perceptions, training needs, and ratings of competency-related statements for the development of core competencies for scientific editors of biomedical journals.

    Science.gov (United States)

    Galipeau, James; Cobey, Kelly D; Barbour, Virginia; Baskin, Patricia; Bell-Syer, Sally; Deeks, Jonathan; Garner, Paul; Shamseer, Larissa; Sharon, Straus; Tugwell, Peter; Winker, Margaret; Moher, David

    2017-01-01

    Background: Scientific editors (i.e., those who make decisions on the content and policies of a journal) have a central role in the editorial process at biomedical journals. However, very little is known about the training needs of these editors or what competencies are required to perform effectively in this role. Methods: We conducted a survey of perceptions and training needs among scientific editors from major editorial organizations around the world, followed by a modified Delphi process in which we invited the same scientific editors to rate the importance of competency-related statements obtained from a previous scoping review. Results: A total of 148 participants completed the survey of perceptions and training needs. At least 80% of participants agreed on six of the 38 skill and expertise-related statements presented to them as being important or very important to their role as scientific editors. At least 80% agreed on three of the 38 statements as necessary skills they perceived themselves as possessing (well or very well).  The top five items on participants' list of top training needs were training in statistics, research methods, publication ethics, recruiting and dealing with peer reviewers, and indexing of journals. The three rounds of the Delphi were completed by 83, 83, and 73 participants, respectively, which ultimately produced a list of 23 "highly rated" competency-related statements and another 86 "included" items. Conclusion: Both the survey and the modified Delphi process will be critical for understanding knowledge and training gaps among scientific editors when designing curriculum around core competencies in the future.

  4. Abatement of Cr (Ⅵ) from wastewater using a new adsorbent, cantaloupe peel: Taguchi L{sub 16} orthogonal array optimization

    Energy Technology Data Exchange (ETDEWEB)

    Ramavandi, Bahman [Bushehr University of Medical Sciences, Bushehr (Iran, Islamic Republic of); Asgari, Ghorban; Faradmal, Javad [Hamadan University of Medical Sciences, Hamadan (Iran, Islamic Republic of); Sahebi, Soleyman [University of Technology, Sydney (UTS), Sydney (Australia); Roshani, Babak [DelcoWater, Saskatoon (Canada)

    2014-12-15

    Taguchi orthogonal design was applied for multivariate optimization of Cr (Ⅵ) abatement by cantaloupe peel powder (CPP), as a novel adsorbent, from industrial wastewater in a batch mode. Effective factors in the adsorption process, such as temperature, CPP dose, Cr (Ⅵ) concentration, wastewater pH, and contact time, were considered using an L{sub 16} orthogonal array design. The best conditions for adsorbing of Cr (Ⅵ) were determined by the Taguchi method and desirability approach as pH of 2, chromium concentration of 100mg/L, contact time of 5min, CPP dosage of 0.5 g/L, and wastewater temperature of 25 .deg. C. Analysis of variance results indicated that the pH was the most important variable influencing the chromium removal percentage, and its contribution value was obtained 45.01%. The Langmuir model proved best fit for the experimental data and maximum adsorption capacity of Cr (Ⅵ) onto CPP was obtained 166.25mg/g. The final part of the study includes an examination of the CPP through an analysis of the removal of chromium from real industrial wastewater. It can be concluded that the CPP presents a promising and efficient alternative for eliminating of Cr (Ⅵ) from industrial wastewaters.

  5. Dry sliding wear behavior of heat treated hybrid metal matrix composite using Taguchi techniques

    International Nuclear Information System (INIS)

    Kiran, T.S.; Prasanna Kumar, M.; Basavarajappa, S.; Viswanatha, B.M.

    2014-01-01

    Highlights: • ZA-27 alloy is used as matrix material and reinforced with SiC and Gr particles. • Heat treatment was carried out for all specimen. • Dry sliding wear test was done on pin-on-disc apparatus by Taguchi technique. • ZA-27/9SiC–3Gr showed superior wear resistance over the base alloy. • Ceramic mixed mechanical layer on contact surface of composite was formed. - Abstract: Dry sliding wear behavior of zinc based alloy and composite reinforced with SiCp (9 wt%) and Gr (3 wt%) fabricated by stir casting method was investigated. Heat treatment (HT) and aging of the specimen were carried out, followed by water quenching. Wear behavior was evaluated using pin on disc apparatus. Taguchi technique was used to estimate the parameters affecting the wear significantly. The effect of HT was that it reduced the microcracks, residual stresses and improved the distribution of microconstituents. The influence of various parameters like applied load, sliding speed and sliding distance on wear behavior was investigated by means and analysis of variance (ANOVA). Further, correlation between the parameters was determined by multiple linear regression equation for each response. It was observed that the applied load significantly influenced the wear volume loss (WVL), followed by sliding speed implying that increase in either applied load or sliding speed increases the WVL. Whereas for composites, sliding distance showed a negative influence on wear indicating that increase in sliding distance reduces WVL due to the presence of reinforcements. The wear mechanism of the worn out specimen was analyzed using scanning electron microscopy. The analysis shows that the formation and retention of ceramic mixed mechanical layer (CMML) plays a major role in the dry sliding wear resistance

  6. Ethical Guideline to Authors,Editors,and Reviewers

    Institute of Scientific and Technical Information of China (English)

    Editorial office of CHM

    2016-01-01

    Drug products are specific goods with safety and effectiveness in medical health case.All of researchers(authors),reviewers,and editors must abide by medical ethical obligation,and also must deter to the ethical obligation for publication.These guidelines are offered as ethical

  7. Performance Optimization of Electrical Discharge Machining (Die Sinker for Al-6061 via Taguchi Approach

    Directory of Open Access Journals (Sweden)

    Muhammad Qaiser Saleem

    2015-04-01

    Full Text Available This paper parametrically optimizes the EDM (Electrical Discharge Machining process in die sinking mode for material removal rate, surface roughness and edge quality of aluminum alloy Al-6061. The effect of eight parameters namely discharge current, pulse on-time, pulse off-time, auxiliary current, working time, jump time distance, servo speed and work piece hardness are investigated. Taguchi's orthogonal array L18 is employed herein for experimentation. ANOVA (Analysis of Variance with F-ratio criterion at 95% confidence level is used for identification of significant parameters whereas SNR (Signal to Noise Ratio is used for determination of optimum levels. Optimization obtained for Al-6061 with parametric combination investigated herein is validated by the confirmation run.

  8. Taguchi design optimization of machining parameters on the CNC end milling process of halloysite nanotube with aluminium reinforced epoxy matrix (HNT/Al/Ep hybrid composite

    Directory of Open Access Journals (Sweden)

    J.S. Pang

    2014-08-01

    Full Text Available This paper introduces the application of Taguchi optimization methodology in optimizing the cutting parameters of end-milling process for machining the halloysite nanotubes (HNTs with aluminium reinforced epoxy hybrid composite material under dry condition. The machining parameters which are chosen to be evaluated in this study are the depth of cut (d, cutting speed (S and feed rate (f. While, the response factors to be measured are the surface roughness of the machined composite surface and the cutting force. An orthogonal array of the Taguchi method was set-up and used to analyse the effect of the milling parameters on the surface roughness and cutting force. The result from this study shows that the application of the Taguchi method can determine the best combination of machining parameters that can provide the optimal machining response conditions which are the lowest surface roughness and lowest cutting force value. For the best surface finish, A1–B3–C3 (d = 0.4 mm, S = 1500 rpm, f = 60 mmpm is found to be the optimized combination of levels for all the three control factors from the analysis. Meanwhile, the optimized combination of levels for all the three control factors from the analysis which provides the lowest cutting force was found to be A2–B2–C2 (d = 0.6 mm, S = 1000 rpm, f = 40 mmpm.

  9. Multi response optimization of internal grinding process parameters for outer ring using Taguchi method and PCR-TOPSIS

    Science.gov (United States)

    Wisnuadi, Alief Regyan; Damayanti, Retno Wulan; Pujiyanto, Eko

    2018-02-01

    Bearing is one of the most widely used parts in automotive industry. One of the leading bearing manufacturing companies in the world is SKF Indonesia. This company must produce bearing with international standard. SKF Indonesia must do continuous improvement in order to face competition. During this time, SKF Indonesia is only performing quality control at its Quality Assurance department. In other words, quality improvement at SKF Indonesia has not been done thoroughly. The purpose of this research is to improve quality of outer ring product at SKF Indonesia by conducting an internal grinding process experiment about setting speed ratio, fine position, and spark out grinding time. The specific purpose of this experiment is to optimize some quality responses such as roughness, roundness, and cycle time. All of the response in this experiment were smaller the better. Taguchi method and PCR-TOPSIS are used for the optimization process. The result of this research shows that by using Taguchi method and PCR-TOPSIS, the optimum condition occurs on speed ratio 36, fine position 18 µm/s and spark out 0.5 s. The optimum conditions result were roughness 0.398 µm, roundness 1.78 µm and cycle time 8.1 s. This results have been better than the previous results and meet the standards. The roughness of 0.523 µm decrease to 0.398 µm and the average cycle time of 8.5 s decrease to 8.1 s.

  10. Optimization of laccase production from Marasmiellus palmivorus LA1 by Taguchi method of Design of experiments.

    Science.gov (United States)

    Chenthamarakshan, Aiswarya; Parambayil, Nayana; Miziriya, Nafeesathul; Soumya, P S; Lakshmi, M S Kiran; Ramgopal, Anala; Dileep, Anuja; Nambisan, Padma

    2017-02-13

    Fungal laccase has profound applications in different fields of biotechnology due to its broad specificity and high redox potential. Any successful application of the enzyme requires large scale production. As laccase production is highly dependent on medium components and cultural conditions, optimization of the same is essential for efficient product production. Production of laccase by fungal strain Marasmiellus palmivorus LA1 under solid state fermentation was optimized by the Taguchi design of experiments (DOE) methodology. An orthogonal array (L8) was designed using Qualitek-4 software to study the interactions and relative influence of the seven selected factors by one factor at a time approach. The optimum condition formulated was temperature (28 °C), pH (5), galactose (0.8%w/v), cupric sulphate (3 mM), inoculum concentration (number of mycelial agar pieces) (6Nos.) and substrate length (0.05 m). Overall yield increase of 17.6 fold was obtained after optimization. Statistical optimization leads to the elimination of an insignificant medium component ammonium dihydrogen phosphate from the process and contributes to a 1.06 fold increase in enzyme production. A final production of 667.4 ± 13 IU/mL laccase activity paves way for the application of this strain for industrial applications. Study optimized lignin degrading laccases from Marasmiellus palmivorus LA1. This laccases can thus be used for further applications in different scales of production after analyzing the properties of the enzyme. Study also confirmed the use of taguchi method for optimizations of product production.

  11. Optimization of Parameters for Manufacture Nanopowder Bioceramics at Machine Pulverisette 6 by Taguchi and ANOVA Method

    Science.gov (United States)

    Van Hoten, Hendri; Gunawarman; Mulyadi, Ismet Hari; Kurniawan Mainil, Afdhal; Putra, Bismantoloa dan

    2018-02-01

    This research is about manufacture nanopowder Bioceramics from local materials used Ball Milling for biomedical applications. Source materials for the manufacture of medicines are plants, animal tissues, microbial structures and engineering biomaterial. The form of raw material medicines is a powder before mixed. In the case of medicines, research is to find sources of biomedical materials that will be in the nanoscale powders can be used as raw material for medicine. One of the biomedical materials that can be used as raw material for medicine is of the type of bioceramics is chicken eggshells. This research will develop methods for manufacture nanopowder material from chicken eggshells with Ball Milling using the Taguchi method and ANOVA. Eggshell milled using a variation of Milling rate on 150, 200 and 250 rpm, the time variation of 1, 2 and 3 hours and variations the grinding balls to eggshell powder weight ratio (BPR) 1: 6, 1: 8, 1: 10. Before milled with Ball Milling crushed eggshells in advance and calcinate to a temperature of 900°C. After the milled material characterization of the fine powder of eggshell using SEM to see its size. The result of this research is optimum parameter of Taguchi Design analysis that is 250 rpm milling rate, 3 hours milling time and BPR is 1: 6 with the average eggshell powder size is 1.305 μm. Milling speed, milling time and ball to powder weight of ratio have contribution successively equal to 60.82%, 30.76% and 6.64% by error equal to 1.78%.

  12. Data Sharing: A New Editorial Initiative of the International Committee of Medical Journal Editors. Implications for the Editors´ Network

    NARCIS (Netherlands)

    Alfonso, Fernando; Adamyan, Karlen; Artigou, Jean-Yves; Aschermann, Michael; Boehm, Michael; Buendia, Alfonso; Chu, Pao-Hsien; Cohen, Ariel; Cas, Livio Dei; Dilic, Mirza; Doubell, Anton; Echeverri, Dario; Enç, Nuray; Ferreira-González, Ignacio; Filipiak, Krzysztof J.; Flammer, Andreas; Fleck, Eckart; Gatzov, Plamen; Ginghina, Carmen; Goncalves, Lino; Haouala, Habib; Hassanein, Mahmoud; Heusch, Gerd; Huber, Kurt; Hulín, Ivan; Ivanusa, Mario; Krittayaphong, Rungroj; Lau, Chu-Pak; Marinskis, Germanas; Mach, François; Moreira, Luiz Felipe; Nieminen, Tuomo; Oukerraj, Latifa; Perings, Stefan; Pierard, Luc; Potpara, Tatjana; Reyes-Caorsi, Walter; Rim, Se-Joong; Rødevand, Olaf; Saade, Georges; Sander, Mikael; Shlyakhto, Evgeny; Timuralp, Bilgin; Tousoulis, Dimitris; Ural, Dilek; Piek, J. J.; Varga, Albert; Lüscher, Thomas F.

    2017-01-01

    The International Committee of Medical Journal Editors (ICMJE) provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical

  13. An Investigation On Air and Thermal Transmission Through Knitted Fabric Structures Using the Taguchi Method

    Directory of Open Access Journals (Sweden)

    Ghosh Anindya

    2017-06-01

    Full Text Available Knitted fabrics have excellent comfort properties because of their typical porous structure. Different comfort properties of knitted fabrics such as air permeability, thermal absorptivity, and thermal conductivity depend on the properties of raw material and knitting parameters. In this paper, an investigation was done to observe the effect of yarn count, loop length, knitting speed, and yarn input tension in the presence of two uncontrollable noise factors on selected comfort properties of single jersey and 1×1 rib knitted fabrics using the Taguchi experimental design. The results show that yarn count and loop length have significant influence on the thermo-physiological comfort properties of knitted fabrics.

  14. EDITORIAL: Incoming Editor-in-Chief

    Science.gov (United States)

    Lidström, Suzanne

    2012-04-01

    When Professor Anders Bárány took over as the Executive Editor of Physica Scripta, in 1986, he talked of his trepidation at having to 'dress himself' in his predecessor's 'editorial coveralls'. At that time, they had been worn by Professor Nils Robert Nilsson, a major figure in the physics community, for almost 20 years. Just one year prior to this, Professor Roger Wäppling had been recruited to the position of Subeditor in conjunction with a decision to expand the number of contributions in the field of condensed matter physics, to turn it into one of the dominant subjects in the broad-based journal. Physica Scripta had already gained a reputation for being a high quality journal with wide coverage of both experimental and theoretical physics. Interestingly, in the mid 1980s, the number of papers submitted had been growing and an impressive 250 submissions per year had been attained, with all of the manuscripts being handled in-house. Not many miles away in the town of Uppsala, a group of English students was stepping off a train on a magnificent snowy day in January to embark on their final year projects. A couple of us enjoyed ourselves so much that we stayed on afterwards as PhD students, thereby encountering the mixed pleasure of studying physics in a second language for the first time. I used to copy the notes down meticulously in Swedish, then try to work backwards with a textbook to improve my language skills. One day, returning from a particularly incomprehensible lecture on solid state physics, I showed my roommates my notes and asked if they could please explain what the lecture had been about: 'I don't know', they replied, 'but this bit is about sheep!' Meanwhile, back at Physica Scripta, the journal continued to flourish: 400 submissions were received in 1996, and the march of progress was well underway. Manuscripts could now be sent in on disks and Physica Scripta was available on the World Wide Web. Roger was appointed to manage the journal and

  15. Surface Roughness Optimization Using Taguchi Method of High Speed End Milling For Hardened Steel D2

    Science.gov (United States)

    Hazza Faizi Al-Hazza, Muataz; Ibrahim, Nur Asmawiyah bt; Adesta, Erry T. Y.; Khan, Ahsan Ali; Abdullah Sidek, Atiah Bt.

    2017-03-01

    The main challenge for any manufacturer is to achieve higher quality of their final products with maintains minimum machining time. In this research final surface roughness analysed and optimized with maximum 0.3 mm flank wear length. The experiment was investigated the effect of cutting speed, feed rate and depth of cut on the final surface roughness using D2 as a work piece hardened to 52-56 HRC, and coated carbide as cutting tool with higher cutting speed 120-240 mm/min. The experiment has been conducted using L9 design of Taguchi collection. The results have been analysed using JMP software.

  16. Views of Reference List Accuracy from Social Work Journal Editors and Published Authors

    Directory of Open Access Journals (Sweden)

    Scott E. Wilks

    2004-12-01

    Full Text Available Objective:The study’s purpose was to answer two research questions: (1 In the opinion of social work journal editors, how important is reference list accuracy? and (2Who is primarily responsible for the accuracy of reference lists published in social work journals? Method: A sample of 119 authors and 26 journal editors was surveyed to ascertain their views on the above questions and additional items. Results: Regarding the importance of reference list accuracy, editors’ responses (Likert scale averaged between moderately and extremely important. Fifty-three percent of responding editors and 36.5% of authors reported that responsibility is shared between the editor/staff and manuscript authors; the remaining 47% and 63.5%, respectively, responded that responsibility falls upon manuscript authors. Responses from authors, mostly educators, revealed a greater-than-moderate importance (Likert scale given to instructing students on the accurate construction of reference lists. Implications for social work education and journal publishing are discussed.

  17. Changes in Editorial board Rhinology, Prof. Valerie Lund demits office as Editor in Chief of Rhinology

    NARCIS (Netherlands)

    Fokkens, W. J.

    2014-01-01

    At the Editorial Board Meeting of Rhinology Valerie Lund indicated that she has decided to emit office as Editor in Chief of Rhinology. She became a member of the editorial board in 1993, a co-editor with Prof. Bert Huizing in 1999 and Editor in Chief in 2004. She leaves with our grateful thanks for

  18. IMPLEMENTASI EDITOR MODEL DATA KONSEPTUAL DAN MODEL DATA FISIK DENGAN ROUND-TRIP ENGINEERING

    Directory of Open Access Journals (Sweden)

    Aldy Sefan Rezanaldy

    2012-01-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Desain model basis data merupakan sebuah fase penting dalam pengembangan sebuah Aplikasi Sistem Informasi. Editor Model Data yang digunakan untuk melakukan desain basis data sangat diperlukan dalam dunia IT. Sebagian Editor yang ada saat ini belum menerapkan konsep round-trip engineering secara real time, sehingga perubahan yang terjadi pada satu data model membutuhkan event update untuk melakukan pembaharuan pada model data yang lainnya. Editor model data ini merupakan editor dengan round-trip engineering. Konversi bolak-balik dilakukan antara data model konseptual dan data model fisik. Editor ini dikembangkan dengan menggunakan C# .NET Framework dan implementasi desain pola pada Object Oriented. Dalam implementasi sebuah editor, yang merupakan bagian terpenting selain berjalannya seluruh fitur yang ada adalah tentang performa dan kenyamanan user ketika menggunakannya. Performa dan kenyamanan user menjadi penilaian tersendiri pada sebuah editor model data. Aplikasi yang dihasilkan diharapkan dapat digunakan untuk melakukan desain basis data dengan menerapkan metode konversi bolak-balik, sehingga tidak diperlukan proses perbaruan dari model data yang satu ke model data yang lain secara manual. Diharapkan dapat

  19. Ethical dilemmas in scientific publication: pitfalls and solutions for editors Dilemas éticos na publicação científica: dificuldades e soluções para editores

    Directory of Open Access Journals (Sweden)

    Laragh Gollogly

    2006-08-01

    Full Text Available Editors of scientific journals need to be conversant with the mechanisms by which scientific misconduct is amplified by publication practices. This paper provides definitions, ways to document the extent of the problem, and examples of editorial attempts to counter fraud. Fabrication, falsification, duplication, ghost authorship, gift authorship, lack of ethics approval, non-disclosure, 'salami' publication, conflicts of interest, auto-citation, duplicate submission, duplicate publications, and plagiarism are common problems. Editorial misconduct includes failure to observe due process, undue delay in reaching decisions and communicating these to authors, inappropriate review procedures, and confounding a journal's content with its advertising or promotional potential. Editors also can be admonished by their peers for failure to investigate suspected misconduct, failure to retract when indicated, and failure to abide voluntarily by the six main sources of relevant international guidelines on research, its reporting and editorial practice. Editors are in a good position to promulgate reasonable standards of practice, and can start by using consensus guidelines on publication ethics to state explicitly how their journals function. Reviewers, editors, authors and readers all then have a better chance to understand, and abide by, the rules of publishing.Editores de revistas científicas precisam estar atentos aos mecanismos de disseminação de condutas inadequadas no processo de publicação. Este artigo fornece definições, formas de documentar a extensão do problema e exemplos de iniciativas para conter fraudes editorias. Fabricação, falsificação, duplicação, autoria-fantasma, autoria concedida, falta de ética na aprovação de manuscritos, não-divulgação desses fatos, publicação "salami", conflitos de interesse, autocitação, submissão e publicação duplicadas, e plágio são problemas comuns. A conduta editorial inadequada

  20. Optimization design of a gating system for sand casting aluminium A356 using a Taguchi method and multi-objective culture-based QPSO algorithm

    Directory of Open Access Journals (Sweden)

    Wen-Jong Chen

    2016-04-01

    Full Text Available This article combined Taguchi method and analysis of variance with the culture-based quantum-behaved particle swarm optimization to determine the optimal models of gating system for aluminium (Al A356 sand casting part. First, the Taguchi method and analysis of variance were, respectively, applied to establish an L27(38 orthogonal array and determine significant process parameters, including riser diameter, pouring temperature, pouring speed, riser position and gating diameter. Subsequently, a response surface methodology was used to construct a second-order regression model, including filling time, solidification time and oxide ratio. Finally, the culture-based quantum-behaved particle swarm optimization was used to determine the multi-objective Pareto optimal solutions and identify corresponding process conditions. The results showed that the proposed method, compared with initial casting model, enabled reducing the filling time, solidification time and oxide ratio by 68.14%, 50.56% and 20.20%, respectively. A confirmation experiment was verified to be able to effectively reduce the defect of casting and improve the casting quality.

  1. Editor for Remote Database used in ATLAS Trigger/DAQ

    CERN Document Server

    Meessen, C; Valenta, J

    2006-01-01

    The poster gives brief summary of the ATLAS T/DAQ system, then it introduces the RDB database and describes the RDB Editor application, including its internal structure, GUI features, etc. The RDB Editor is an easy-to-use Java application which allows simple navigation between huge number of objects stored in the RDB. It supports bookmarks, histories, etc. in the way usual in the web browsers. Moreover, it is possible to enhance the application by specialized (graphical) viewers for objects of particular class which will allow the user to see, for example, details that are hard to spot in textual view. As an example of such a plug-in, viewer for EFD_Configuration class was developed.

  2. Writing GNU Emacs Extensions Editor Customizations and Creations with Lisp

    CERN Document Server

    Glickstein, Bob

    2010-01-01

    Yes, it is possible to be all things to all people, if you're talking about the Emacs editor. As a user, you can make any kind of customization you want, from choosing the keystrokes that invoke your favorite commands to creating a whole new work environment that looks like nothing ever developed before. It's all in Emacs Lisp -- and in this short but fast-paced book. GNU Emacs is more than an editor; it's a programming environment, a communications package, and many other things. To provide such a broad range of functions, it offers a full version of the Lisp programming language

  3. Application of Taguchi approach to optimize friction stir welding parameters of polyethylene

    Directory of Open Access Journals (Sweden)

    Bejaoui S.

    2010-06-01

    Full Text Available This paper presents experimental and numerical results of butt friction stir welding of high density polyethylene. The FSW designed tool insulates the welded samples and preserves the heat gained from friction thus avoiding the appearance of blisters and splits after welding. The experimental tests, conducted according to combinations of process factors such as rotation speed, welding speed, pin diameter and hold time at beginning welding, were carried out according the Taguchi orthogonal table L27 in randomized way. Temperatures in the joint during the welding operation and flow stresses from the tensile tests of welded samples were measured and variances were analyzed. Identified models were used to simulate, by finite elements, the tensile tests performed on specimens having a weld cordon in their active area. The results show coherence between the numerical predictions and experimental observations in different cases of weld cordon mechanical behaviour.

  4. FloorspaceJS - A New, Open Source, Web-Based Geometry Editor for Building Energy Modeling (BEM): Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Macumber, Daniel L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Horowitz, Scott G [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schott, Marjorie [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Nolan, Katie [Devetry; Schiller, Brian [Devetry

    2018-03-19

    Across most industries, desktop applications are being rapidly migrated to web applications for a variety of reasons. Web applications are inherently cross platform, mobile, and easier to distribute than desktop applications. Fueling this trend are a wide range of free, open source libraries and frameworks that make it incredibly easy to develop powerful web applications. The building energy modeling community is just beginning to pick up on these larger trends, with a small but growing number of building energy modeling applications starting on or moving to the web. This paper presents a new, open source, web based geometry editor for Building Energy Modeling (BEM). The editor is written completely in JavaScript and runs in a modern web browser. The editor works on a custom JSON file format and is designed to be integrated into a variety of web and desktop applications. The web based editor is available to use as a standalone web application at: https://nrel.github.io/openstudio-geometry-editor/. An example integration is demonstrated with the OpenStudio desktop application. Finally, the editor can be easily integrated with a wide range of possible building energy modeling web applications.

  5. Magazine Editors and the Writing Process: An Analysis of How Editors Work with Staff and Free-Lance Writers.

    Science.gov (United States)

    Schierhorn, Ann B.; Endres, Kathleen L.

    Editors of business and consumer magazines chosen by a random sample were asked in a mail survey what method they used in working with staff writers and free-lance writers. They were asked how they work with writers in the five stages of the writing process--idea, reporting, organizing, writing and rewriting. The first mailing to consumer…

  6. Message from the Editor

    Science.gov (United States)

    Stambaugh, Ronald D.

    2014-01-01

    This last year being an odd numbered year, the pages of Nuclear Fusion saw a large influx of expanded papers from the 2012 Fusion Energy Conference in San Diego. Many papers have focused on the scientific and technical challenges posed by ITER. Contributions are steadily increasing from the new superconducting tokamaks in Asia. The ITER Project continues to move ahead. Construction at the Cadarache site is quite remarkable. Buildings completed include the huge Poloidal Field Coils Winding Facility and the Headquarters building, which has been occupied by the ITER staff. Work is progressing on the Assembly building and the Cryostat Workshop. The base of the tokamak complex is being laid. Besides the construction that is taking place and will take place at the site, components from around the world have to navigate the complex route from Marseilles to the site. A test convoy replicating the dimensions and weights of the most exceptional ITER loads successfully traversed that route in 2013. We are pleased to report that the IAEA and ITER have finalized the agreement for ITER authors to publish papers in Nuclear Fusion . Nuclear Fusion is proud to continue its key role in providing the leading forum for the documentation of scientific progress and exchange of research results internationally toward fusion energy. Refereeing The Nuclear Fusion editorial office appreciates greatly the effort made by our referees to sustain the high quality of the journal. Since January 2005, we have been offering the most active referees over the past year a personal subscription to Nuclear Fusion with electronic access for one year, free of charge. We have excluded our Board Members, Guest Editors of special editions and those referees who were already listed in previous years. The following people have been selected: J.M. Canik, Oak Ridge National Laboratory, USA I.T. Chapman, Culham Centre for Fusion Energy, UK L.-G. Eriksson, Commission of the European Communities, Belgium T. Evans

  7. EDITORIAL: A word from the new Editor-in-Chief A word from the new Editor-in-Chief

    Science.gov (United States)

    Mostowski, Jan

    2011-01-01

    TIn the autumn of 2010 I became the Editor-in Chief of European Journal of Physics (EJP). EJP is a place for teachers, instructors and professors to exchange their views on teaching physics at university level and share their experience. It is general opinion that no good research is possible without connection with good, high-quality teaching, at the university level in particular. Therefore excellence in physics teaching is important to the physics community. European Journal of Physics is proud of its contribution to achieving this goal. As Editor-in-Chief, I will continue to work to this general objective of the journal. We will publish articles on specific topics in physics, stressing originality of presentation and suitability for use in students'laboratories, lectures and physics teaching in general. We will also publish more pedagogical papers presenting the achievements of particular teaching methods. In addition, we will continue to publish special sections on particular areas of physics, as well as the annual special section on physics competitions. European Journal of Physics is in good shape. Due to the work of the previous editors and the publisher, the readership is high and growing steadily, and many excellent papers are being submitted and published. I hope that this positive trend for the journal will continue, and I will do my best to keep to this high standard. A few words about myself. I work in the Institute of Physics in Warsaw, Poland. My main research interests are in theoretical quantum optics and I have published about 80 research papers on this topic. For many years I was involved in teaching physics at university and in high school. I am a co-author of a textbook on physics for high-school students and of a problem book in quantum mechanics. For the last ten years, I have been involved in the International Physics Olympiad and over the last few years I have been a member of the Editorial Board of European Journal of Physics.

  8. Optimization of Performance and Emission Characteristics of Diesel Engine with Biodiesel Using Grey-Taguchi Method

    Directory of Open Access Journals (Sweden)

    Goutam Pohit

    2013-01-01

    Full Text Available Engine performances and emission characteristics of Karanja oil methyl ester blended with diesel were carried out on a variable compression diesel engine. In order to search for the optimal process response through a limited number of experiment runs, application of Taguchi method in combination with grey relational analysis had been applied for solving a multiple response optimization problem. Using grey relational grade and signal-to-noise ratio as a performance index, a particular combination of input parameters was predicted so as to achieve optimum response characteristics. It was observed that a blend of fifty percent was most suitable for use in a diesel engine without significantly affecting the engine performance and emissions characteristics.

  9. Comparative Assessment of Cutting Inserts and Optimization during Hard Turning: Taguchi-Based Grey Relational Analysis

    Science.gov (United States)

    Venkata Subbaiah, K.; Raju, Ch.; Suresh, Ch.

    2017-08-01

    The present study aims to compare the conventional cutting inserts with wiper cutting inserts during the hard turning of AISI 4340 steel at different workpiece hardness. Type of insert, hardness, cutting speed, feed, and depth of cut are taken as process parameters. Taguchi’s L18 orthogonal array was used to conduct the experimental tests. Parametric analysis carried in order to know the influence of each process parameter on the three important Surface Roughness Characteristics (Ra, Rz, and Rt) and Material Removal Rate. Taguchi based Grey Relational Analysis (GRA) used to optimize the process parameters for individual response and multi-response outputs. Additionally, the analysis of variance (ANOVA) is also applied to identify the most significant factor.

  10. Roles and responsibilities of the special-section editor

    KAUST Repository

    Marfurt, Kurt

    2017-10-19

    professionals to demonstrate that value in action. Other advantages include the perspectives provided by such special-section authors, editors, and reviewers that draw in a diverse suite of geoscientists and engineers that truly represent the interpretation community. Where there are advantages, there are also disadvantages. First, the vast majority of special-section editors are “new to the job,” never having served on an editorial board of a peer-reviewed scientific journal. The primary objective of this “From the Editor” note is to clarify the roles and responsibilities of this task. Second, many of the selected reviewers may never have had the opportunity to review a paper for publication. They too are new to the job. The August issue of the From the Editor column (Bui et al., 2017) titled “Qualities of a good reviewer” directly addresses this challenge. In this article, we encourage the reviewers to help the authors to construct a quality, well-referenced paper because many of them, too, are new to the job. The third disadvantage is that the special-section format skews the citation-index metrics. Obviously, if the special-section editors identify a good oral presentation and request the author to develop a full-length paper, the chances of acceptance are higher, thus lowering the citation index score. More on this conundrum will be found in the From the Editor column in the February 2018 issue of Interpretation. The remainder of this short article addresses the issues specific to the special-section editors.

  11. EDITORIAL: Greetings from the new Editor-in-Chief

    Science.gov (United States)

    Bhattacharya, P.

    2004-04-01

    On 1 January, 2004, I assumed the position of Editor-in-Chief of Journal of Physics D: Applied Physics. I will start by saying that I will do my best to justify the confidence of the journal management and publishing staff in my abilities. I was fortunate to have been able to work, as an Editorial Board member, with my predecessor, the previous Editor-in-Chief, Professor Allister Ferguson. Allister has provided a high degree of intellectual stewardship for the journal in the last five years. He has made the job appear a worthy challenge for me. I therefore take this opportunity to thank Allister on behalf of the Editorial Board and publishing staff of the journal. Several other factors contributed to my decision to accept this position. The first is the group of people who actually go about the business of publishing. The Senior Publisher, Nicola Gulley (and her predecessor Sophy Le Masurier); the Managing Editor, Jill Membrey; the Publishing Administrators, Nina Blakesley and Sarah Towell; the Production Editor, Katie Gerrard and their office staff form an amazing group and have managed to make the operation of the journal incredibly efficient. An index of this is the speed with which incoming manuscripts are processed. The average time between the receipt of a manuscript and its web publication, if accepted, is 130 days. This is three to five times shorter than for most other journals. A factor that contributes to this success is a responsive pool of referees that the publishing staff have as a valuable resource. Ultimately, the standard bearers of any journal are the referees. Therefore, a grateful `thank you' is due from all of us at J. Phys. D to all our referees, who diligently perform this honourable task. The Associate Editors of the journal, Professors Lawler, Margaritondo and O'Grady, also provide immense scientific leadership. They help in defining new directions for the journal and in the publishing process. Last, but not least, a remarkable asset of

  12. Editorial: Letter from the Editors

    Directory of Open Access Journals (Sweden)

    James Sidanius

    2012-12-01

    Full Text Available This issue of the journal focuses on the question of bullying prevention, with a collection of articles put together by Manuel Eisner and Tina Malti. We are very grateful to them for the hard work they put in as focus section editors – and in their contributions to the section. The open section this time takes us to North America for a study of identity and in-group superiority and Africa for a review of the question of youth and violence.

  13. Seleção de parâmetros através do método Taguchi para soldagem de revestimento com ligas de níquel pelo processo MIG/MAG Using the Taguchi method to select welding parameters for weld overlay with nickel alloy through the GMAW process

    Directory of Open Access Journals (Sweden)

    Antonio Rodolfo Paulino Pessoa

    2010-12-01

    Full Text Available Neste trabalho utilizou-se o método Taguchi (planejamento Robusto de experimentos, para cumprir com um reduzido número de ensaios, dois objetivos: obter a influência dos fatores de controle sobre as variáveis respostas e determinar as condições ideais para aplicação das ligas de níquel nas soldagens de revestimentos através do processo MIG/MAG com transferência metálica por curto-circuito. Foram escolhidos seis fatores de controle com três níveis cada: Tensão de referência, Velocidade de soldagem, Tipo de tecimento, Técnica da tocha, Gás de proteção e o Material de adição. Por sua vez as variáveis respostas escolhidas foram: Diluição (D e Razão entre o reforço e a largura (R/L. As soldagens foram realizadas na posição plana por simples deposição sobre chapas de aço ASTM 516 Gr60 com dimensões de 200 x 50 x 12,7 mm. O uso do tecimento proporcionou cordões com baixos valores da razão R/L e obteve valores bastante baixos de diluição chegando à ordem de 5%. A combinação dos níveis dos fatores de controle apontados como ótimos pelo método Taguchi resultaram em valores para as variáveis repostas consideradas adequadas para a soldagem de revestimento.In this work aim the Taguchi method (Robust design of experiments was chosen to achieve with a limited number of tests two objectives: the first was to the influence of the control factors (welding parameters on quality characteristics (weld bead geometry and the second was to determine optimal conditions for weld overlay with nickel alloy through the GMAW process in a short circuiting transfer mode. Six control factors were employed with three levels each: Reference voltage, Welding speed, Arc oscillation, welding gun orientation (Perpendicular, forehand and backhand, Shielding gas and filler metal. Already the employed quality characteristics were: Percent dilution (D and the ration between reinforcement and bead width (R/L. The weldings were accomplished using

  14. Multi-response optimization of process parameters using Taguchi method and grey relational analysis during turning AA 7075/SiC composite in dry and spray cooling environments

    Directory of Open Access Journals (Sweden)

    P. C. Mishra

    2015-09-01

    Full Text Available Turning experiments were carried out on AA 7075/SiC composite workpiece in dry and spray cooling environments based on L16 Taguchi design of experiments. Multiple performance optimization of process parameters was performed using grey relational analysis. The performance characteristics considered were average surface roughness, cutting tool temperature and material removal rate. Uncoated carbide inserts were used for machining the workpiece in a high speed precision lathe. A grey relational grade obtained from grey relational analysis was used to optimize the process parameters. Optimal combination of process parameters was then determined by the Taguchi method using the grey relational grade as the performance index. Experimental results indicated that the turning in spray cooling environment was beneficial compared to that in dry environment for the quality response characteristics under consideration. Analysis of variance showed that feed was the most significant parameter for the multiple performance characteristics during turning in both the environments.

  15. Payments by US pharmaceutical and medical device manufacturers to US medical journal editors: retrospective observational study

    Science.gov (United States)

    Bell, Chaim M; Matelski, John J; Detsky, Allan S; Cram, Peter

    2017-01-01

    Objective To estimate financial payments from industry to US journal editors. Design Retrospective observational study. Setting 52 influential (high impact factor for their specialty) US medical journals from 26 specialties and US Open Payments database, 2014. Participants 713 editors at the associate level and above identified from each journal’s online masthead. Main outcome measures All general payments (eg, personal income) and research related payments from pharmaceutical and medical device manufacturers to eligible physicians in 2014. Percentages of editors receiving payments and the magnitude of such payments were compared across journals and by specialty. Journal websites were also reviewed to determine if conflict of interest policies for editors were readily accessible. Results Of 713 eligible editors, 361 (50.6%) received some (>$0) general payments in 2014, and 139 (19.5%) received research payments. The median general payment was $11 (£8; €9) (interquartile range $0-2923) and the median research payment was $0 ($0-0). The mean general payment was $28 136 (SD $415 045), and the mean research payment was $37 963 (SD $175 239). The highest median general payments were received by journal editors from endocrinology ($7207, $0-85 816), cardiology ($2664, $0-12 912), gastroenterology ($696, $0-20 002), rheumatology ($515, $0-14 280), and urology ($480, $90-669). For high impact general medicine journals, median payments were $0 ($0-14). A review of the 52 journal websites revealed that editor conflict of interest policies were readily accessible (ie, within five minutes) for 17/52 (32.7%) of journals. Conclusions Industry payments to journal editors are common and often large, particularly for certain subspecialties. Journals should consider the potential impact of such payments on public trust in published research. PMID:29074628

  16. Optimization of squeeze casting parameters for non symmetrical AC2A aluminium alloy castings through Taguchi method

    International Nuclear Information System (INIS)

    Senthil, P.; Amirthagadeswaran, K. S.

    2012-01-01

    This paper reports a research in which an attempt was made to prepare AC2A aluminium alloy castings of a non symmetrical component through squeeze casting process. The primary objective was to investigate the influence of process parameters on mechanical properties of the castings. Experiments were conducted based on orthogonal array suggested in Taguchi's offline quality control concept. The experimental results showed that squeeze pressure, die preheating temperature and compression holding time were the parameters making significant improvement in mechanical properties. The optimal squeeze casting condition was found and mathematical models were also developed for the process

  17. "Clones," Codes, and Conflicts of Interest in Cartooning: Cartoonists and Editors Look at Ethics.

    Science.gov (United States)

    Riffe, Daniel; And Others

    A study examined differences between political cartoonists and op-ed page editors on both traditional ethical issues (such as conflicts of interest) and the special, style-related concerns of editorial cartoonists. Hypotheses proposed were that editors and cartoonists (1) would condemn "cloning" or copying, reflecting an ethical…

  18. Improving the quality of papers submitted to dental journals: Transcription of session for editors, associate editors, publishers and others with an interest in scientific publishing held at IADR meeting in Cape Town on Wednesday, 25 June 2014.

    Science.gov (United States)

    Eaton, Kenneth A; Giannobile, William V; Sourgen, Deborah L; Balaji, S M; Honkala, Eino; Lynch, Christopher D

    2015-08-01

    This satellite symposium was the fourth in a series for editors, publishers, reviewers and all those with an interest in scientific publishing. It was held on Wednesday 25th June 2014 at the IADR International meeting in Cape Town, South Africa. The symposium attracted more than 180 attendees. This symposium placed an emphasis on how the quality of papers submitted to dental journals could be improved. The panel included representation from editors, researchers and publishers from North America, India and the Gulf States. The symposium identified a number of challenges for editors and publishers, including the poor quality of many papers submitted to dental and other scientific journals, plagiarism, attempted duplicate publication and sometimes fraudulent results. Where possible speakers are identified by name. A subsequent symposium was held during the IADR meeting in Boston on March 11th 2015. Involvement open to editors, associate editors, publishers and others with an interest in scientific publishing. Copyright © 2015. Published by Elsevier Ltd.. All rights reserved.

  19. Authors, editors, and the signs, symptoms and causes of plagiarism

    Science.gov (United States)

    Shashok, Karen

    2011-01-01

    Plagiarism and inadequate citing appear to have reached epidemic proportions in research publication. This article discusses how plagiarism is defined and suggests some possible causes for the increase in the plagiarism disease. Most editors do not have much tolerance for text re-use with inadequate citation regardless of reasons why words are copied from other sources without correct attribution. However, there is now some awareness that re-use of words in research articles to improve the writing or “the English” (which has become a common practice) should be distinguished from intentional deceit for the purpose of stealing other authors’ ideas (which appears to remain a very rare practice). Although it has become almost as easy for editors to detect duplicate text as it is for authors to re-use text from other sources, editors often fail to consider the reasons why researchers resort to this strategy, and tend to consider any text duplication as a symptom of serious misconduct. As a result, some authors may be stigmatized unfairly by being labeled as plagiarists. The article concludes with practical advice for researchers on how to improve their writing and citing skills and thus avoid accusations of plagiarism. PMID:21957412

  20. Authors, editors, and the signs, symptoms and causes of plagiarism

    Directory of Open Access Journals (Sweden)

    Karen Shashok

    2011-01-01

    Full Text Available Plagiarism and inadequate citing appear to have reached epidemic proportions in research publication. This article discusses how plagiarism is defined and suggests some possible causes for the increase in the plagiarism disease. Most editors do not have much tolerance for text re-use with inadequate citation regardless of reasons why words are copied from other sources without correct attribution. However, there is now some awareness that re-use of words in research articles to improve the writing or "the English" (which has become a common practice should be distinguished from intentional deceit for the purpose of stealing other authors′ ideas (which appears to remain a very rare practice. Although it has become almost as easy for editors to detect duplicate text as it is for authors to re-use text from other sources, editors often fail to consider the reasons why researchers resort to this strategy, and tend to consider any text duplication as a symptom of serious misconduct. As a result, some authors may be stigmatized unfairly by being labeled as plagiarists. The article concludes with practical advice for researchers on how to improve their writing and citing skills and thus avoid accusations of plagiarism.

  1. Authors, editors, and the signs, symptoms and causes of plagiarism.

    Science.gov (United States)

    Shashok, Karen

    2011-07-01

    Plagiarism and inadequate citing appear to have reached epidemic proportions in research publication. This article discusses how plagiarism is defined and suggests some possible causes for the increase in the plagiarism disease. Most editors do not have much tolerance for text re-use with inadequate citation regardless of reasons why words are copied from other sources without correct attribution. However, there is now some awareness that re-use of words in research articles to improve the writing or "the English" (which has become a common practice) should be distinguished from intentional deceit for the purpose of stealing other authors' ideas (which appears to remain a very rare practice). Although it has become almost as easy for editors to detect duplicate text as it is for authors to re-use text from other sources, editors often fail to consider the reasons why researchers resort to this strategy, and tend to consider any text duplication as a symptom of serious misconduct. As a result, some authors may be stigmatized unfairly by being labeled as plagiarists. The article concludes with practical advice for researchers on how to improve their writing and citing skills and thus avoid accusations of plagiarism.

  2. Artificial intelligence in peer review: How can evolutionary computation support journal editors?

    OpenAIRE

    Mrowinski, Maciej J.; Fronczak, Piotr; Fronczak, Agata; Ausloos, Marcel; Nedic, Olgica

    2017-01-01

    With the volume of manuscripts submitted for publication growing every year, the deficiencies of peer review (e.g. long review times) are becoming more apparent. Editorial strategies, sets of guidelines designed to speed up the process and reduce editors' workloads, are treated as trade secrets by publishing houses and are not shared publicly. To improve the effectiveness of their strategies, editors in small publishing groups are faced with undertaking an iterative trial-and-error approach. ...

  3. Complete PCB design using OrCAD capture and PCB editor

    CERN Document Server

    Mitzner, Kraig

    2009-01-01

    This book provides instruction on how to use the OrCAD design suite to design and manufacture printed circuit boards. The primary goal is to show the reader how to design a PCB using OrCAD Capture and OrCAD Editor. Capture is used to build the schematic diagram of the circuit, and Editor is used to design the circuit board so that it can be manufactured. The book is written for both students and practicing engineers who need in-depth instruction on how to use the software, and who need background knowledge of the PCB design process. KEY FEATURES:* Beginning to end cove

  4. Letter to the Editor: Re: A Five-year Survey of Cesarean Delivery at a ...

    African Journals Online (AJOL)

    Letter to the Editor: Re: A Five-year Survey of Cesarean Delivery at a Nigerian Tertiary Hospital. VO Ajuzieogu, AO Amucheazi. Abstract. Letter to the editor - no abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. Article Metrics. Metrics Loading .

  5. (Executive Editor). Microsoft Encarta Encyclopedia Deluxe 2000 ...

    African Journals Online (AJOL)

    In this regard it can be used to search only the articles, any of the multimedia features, or all the features. The editors have retained the pinpointer's form and have also opted for the same initial-alphabetical listing of lemmas in the main display window of the pinpointer. This maintains the continuity in this line of products and.

  6. An Investigation of Optimum NLC-Sunscreen Formulation Using Taguchi Analysis

    Directory of Open Access Journals (Sweden)

    Pao Chi Chen

    2013-01-01

    Full Text Available This study used three kinds of wax and three kinds of oil, with fixed mixture ratio including UV-blocking materials of ethylhexyl methoxycinnamate, oxybenzone, and avobenzone, and applied hot high-pressure homogenization process to prepare nanolipid sunscreen formulations. The measured particle size of the sunscreen formulations was 100~300 nm around PDI of 0.2 having a moderate polydisperse system. The distribution of zeta potential was −50 mV to −35 mV, showing a stable system. The UV light-absorbing range of 9 groups of sunscreen formulations was 275 nm~380 nm ranging within UVA and UVB. The rheological analysis found that the viscosity change is shear, thinning exhibiting colloid behavior. Taguchi analysis found that the optimum combinations are the carnauba wax and the blackcurrant oil combination for crystallinity and the beeswax and CPG oil for UV absorption. In addition, UV-blocking ability shows that the SPF was 51.5 and PFA was three stars for SU9 formulation. Finally, the effect of temperature on the properties of sunscreen formulations was also explored.

  7. Letter from the editor

    Directory of Open Access Journals (Sweden)

    Germán A. Prieto G.

    2017-07-01

    Full Text Available On September 2017, two large earthquakes struck México. Numerous casualties and at least 40 buildings collapsed in Mexico City.   The earthquakes are explained by the tectonic setting of Central America, the Cocos plate subducts underneath the North American Plate at about 7-8 cm a year, making Mexico a seismically active region. But the two earthquakes - with hypocenter depths between 50 and 60 km – did not occur in the contact between the two tectonic plates as is usually expected, but rather within the Cocos plate as it bends downward within the mantle. Both events showed a normal faulting mechanism, and although they were widely felt, their major impact was in densely populated Mexico City, where wave amplification is expected due to the geological features of the City's soil structure.   We know that we cannot predict earthquakes, and although this is the holy-grail in seismology, it seems like we are not close to accurately predict them. Nevertheless, early warning systems have been developed in various places, including Mexico, and they were successful in issuing an alarm, although with a few seconds before the strong shaking. These developments can save lives and continue to be relevant and are likely to be implemented in other regions, including the pacific coast of the US. Another aspect that can save lives is people’s awareness. The M7.1 earthquake occurred in the afternoon of the anniversary of the 1985 Michoacan earthquake, just a couple of hours after an earthquake drill in Mexico City, so people had just recently been remained of what to do.  This most likely saved lives.   We should ask ourselves, are we prepared? Is our city prepared?     Germán Prieto Editor in Chief   Carlos A. Vargas Former Editor

  8. Menthor Editor: An Ontology-Driven Conceptual Modeling Platform

    NARCIS (Netherlands)

    Moreira, João Luiz; Sales, Tiago Prince; Guerson, John; Braga, Bernardo F.B; Brasileiro, Freddy; Sobral, Vinicius

    2016-01-01

    The lack of well-founded constructs in ontology tools can lead to the construction of non-intended models. In this demonstration we present the Menthor Editor, an ontology-driven conceptual modelling platform which incorporates the theories of the Unified Foundational Ontology (UFO). We illustrate

  9. NEW EDITOR OF THE CMS BULLETIN

    CERN Multimedia

    Walter Van Doninck has been the Editor of the CMS Bulletin since 2000. The Bulletin not only helps disseminate information but also records the progress of CMS. Walter is handing over to Karl Gill. We would like to thank Walter for carrying out this task with enthusiasm and efficiency for so long. We should also thank Karl for accepting to take over and wish him well over the coming exciting period.

  10. Optimization of field emission properties of carbon nanotubes by Taguchi method

    International Nuclear Information System (INIS)

    Ting, J.-H.; Chang, C.-C.; Chen, S.-L.; Lu, D.-S.; Kung, C.-Y.; Huang, F.-Y.

    2006-01-01

    It is the purpose of this study to evaluate the field emission property of carbon nanotubes (CNTs) prepared by microwave plasma-enhanced chemical vapor deposition (MPCVD) method. Nickel layer of 5 nm in thickness on 20-nm thickness titanium nitride film was transformed into discrete islands after hydrogen plasma pretreatment. CNTs were then grown up on Ni-coated areas by MPCVD. Through the practice of Taguchi method, superior CNT films with very low emission onset electric field, about 0.7 V/μm (at J = 10 μA/cm 2 ), are attained without post-deposition treatment. It is found that microwave power has the most important influence on the field emission characteristics of CNT films. The increase of methane flow ratio will downgrade the degree of graphitization of CNT and thus its field emission characteristics. Scanning electron microscope and transmission electron microscopy (TEM) observation and energy dispersive X-ray spectrometer analysis reveal that CNT growth by MPCVD is based on tip-growth mechanism. TEM micrographs validate the hollow, bamboo-like structure of the multi-walled CNTs

  11. OPTIMASI PROSES PEMBUATAN BRIKET BIOMASSA MENGGUNAKAN METODE TAGUCHI GUNA MEMENUHI KEBUTUHAN BAHAN BAKAR ALTERNATIF YANG RAMAH LINGKUNGAN (Optimization of Biomass Briquettes Production Process Using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Musabbikhah Musabbikhah

    2015-03-01

    Full Text Available ABSTRAK Permasalahan yang dihadapi pembuat dan pengguna briket adalah briket yang dihasilkan kualitasnya rendah ditinjau dari nilai kalor. Tujuan penelitian ini adalah menentukan kualitas briket terbaik dari limbah biomassa dalam memenuhi kebutuhan bahan bakar alternatif rumah tangga yang murah dan ramah lingkungan guna mewujudkan masyarakat mandiri energi. Metode yang digunakan untuk menentukan kualitas briket adalah metode Taguchi. Variabel bebas dalam penelitian ini adalah tekanan pengepressan, waktu penahanan, model cetakan, suhu pengeringan, lama pengeringan dan komposisi bahan, sedangkan variabel terikat adalah nilai kalor briket. Hasil penelitian menunjukkan bahwa kualitas briket terbaik ditinjau dari nilai kalor tertinggi yaitu pada setting parameter A2B1C2D2E2F1, artinya tekanan pengepressan 225 kg/cm2, waktu penahanan 5 menit, model cetakan sarang tawon (kotak, suhu pengeringan 60 °C, lama pengeringan 3 hari, perbandingan limbah jarak pagar : arang sekam : arang tempurung kelapa : perekat adalah 5 : 3: 2 : 1. Rata-rata nilai kalor biobriket yang dihasilkan sebesar 5.323 kal/g. Hal ini menunjukkan bahwa briket mempunyai nilai kalor yang tinggi dan memenuhi SNI, sehingga briket layak untuk memenuhi kebutuhan bahan bakar alternatif yang ramah lingkungan. ABSTRACT Problems that encountered on manufacturers and users of briquettes is low quality of the briquettes in terms of heat value. The aim of this research is to determine the best quality of the briquette which is made from biomass waste. The briquette is expected to be used to fulfill the need of inexpensive and environmentally friendly of alternative household fuel, by which the energy independent community could be realized.The method used to determine the quality of the briquette is Taguchi method. The independent variables involved are compressive strength, holding time, mold model, drying temperature, drying time and material composition. The dependent variable is the highest

  12. Optimization of Injection Molding Parameters for HDPE/TiO₂ Nanocomposites Fabrication with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis.

    Science.gov (United States)

    Pervez, Hifsa; Mozumder, Mohammad S; Mourad, Abdel-Hamid I

    2016-08-22

    The current study presents an investigation on the optimization of injection molding parameters of HDPE/TiO₂ nanocomposites using grey relational analysis with the Taguchi method. Four control factors, including filler concentration (i.e., TiO₂), barrel temperature, residence time and holding time, were chosen at three different levels of each. Mechanical properties, such as yield strength, Young's modulus and elongation, were selected as the performance targets. Nine experimental runs were carried out based on the Taguchi L₉ orthogonal array, and the data were processed according to the grey relational steps. The optimal process parameters were found based on the average responses of the grey relational grades, and the ideal operating conditions were found to be a filler concentration of 5 wt % TiO₂, a barrel temperature of 225 °C, a residence time of 30 min and a holding time of 20 s. Moreover, analysis of variance (ANOVA) has also been applied to identify the most significant factor, and the percentage of TiO₂ nanoparticles was found to have the most significant effect on the properties of the HDPE/TiO₂ nanocomposites fabricated through the injection molding process.

  13. Scientific value of systematic reviews: survey of editors of core clinical journals.

    Directory of Open Access Journals (Sweden)

    Joerg J Meerpohl

    Full Text Available BACKGROUND: Synthesizing research evidence using systematic and rigorous methods has become a key feature of evidence-based medicine and knowledge translation. Systematic reviews (SRs may or may not include a meta-analysis depending on the suitability of available data. They are often being criticised as 'secondary research' and denied the status of original research. Scientific journals play an important role in the publication process. How they appraise a given type of research influences the status of that research in the scientific community. We investigated the attitudes of editors of core clinical journals towards SRs and their value for publication. METHODS: We identified the 118 journals labelled as "core clinical journals" by the National Library of Medicine, USA in April 2009. The journals' editors were surveyed by email in 2009 and asked whether they considered SRs as original research projects; whether they published SRs; and for which section of the journal they would consider a SR manuscript. RESULTS: The editors of 65 journals (55% responded. Most respondents considered SRs to be original research (71% and almost all journals (93% published SRs. Several editors regarded the use of Cochrane methodology or a meta-analysis as quality criteria; for some respondents these criteria were premises for the consideration of SRs as original research. Journals placed SRs in various sections such as "Review" or "Feature article". Characterization of non-responding journals showed that about two thirds do publish systematic reviews. DISCUSSION: Currently, the editors of most core clinical journals consider SRs original research. Our findings are limited by a non-responder rate of 45%. Individual comments suggest that this is a grey area and attitudes differ widely. A debate about the definition of 'original research' in the context of SRs is warranted.

  14. Application of Taguchi L16 design method for comparative study of ability of 3A zeolite in removal of Rhodamine B and Malachite green from environmental water samples

    Science.gov (United States)

    Rahmani, Mashaallah; Kaykhaii, Massoud; Sasani, Mojtaba

    2018-01-01

    This study aimed to investigate the efficiency of 3A zeolite as a novel adsorbent for removal of Rhodamine B and Malachite green dyes from water samples. To increase the removal efficiency, effecting parameters on adsorption process were investigated and optimized by adopting Taguchi design of experiments approach. The percentage contribution of each parameter on the removal of Rhodamine B and Malachite green dyes determined using ANOVA and showed that the most effective parameters in removal of RhB and MG by 3A zeolite are initial concentration of dye and pH, respectively. Under optimized condition, the amount predicted by Taguchi design method and the value obtained experimentally, showed good closeness (more than 94.86%). Good adsorption efficiency obtained for proposed methods indicates that, the 3A zeolite is capable to remove the significant amounts of Rhodamine B and Malachite green from environmental water samples.

  15. From the Editor

    Directory of Open Access Journals (Sweden)

    Neven Vrček

    2014-06-01

    Full Text Available Dear authors, readers and future authors,it is my pleasure to present you the 1st number of the 38th volume of the Journal of Information and Organizational Sciences – JIOS.Please allow me one personal note. This is my last issue as an editor. I started in 2008. and it is time to make some changes. I’ll continue to act as a member of editorial board but I am handling over my editorial duty to new editor Alen Lovrenčić. It was pleasure to work with all authors, reviewers and collaborators and please continue partnership with JIOS because we have high aims which cannot be achieved without dedicated scientific community. I would also like to thank the publishing team of JIOS who helped with many operational issues especially: Bernarda Kos, Goran Hajdin and Darko Grabar. In this issue a selection of 3 original scientific papers, 1 survey paper and 1 preliminary communications has been included, all of which have undergone a rigorous double-blind review process in some cases in several rounds.The constant mission of JIOS is to cover scientific publications from broad area of information sciences and related disciplines and we continuously receive many articles in which authors strive to achieve scientific merit. Our review procedure is very strict but even when we decline papers we try to encourage authors in their future work and motivate them to give better results. That is why we maintain very good relations with our authors and we invite all of you to extend cooperation with JIOS.We hope that the variety of themes will draw the attention of researchers in different fields of information sciences and motivate potential authors to expand the Journal’s thematic scope by other themes that may be of interest to the wider ICT research community. These themes motivate us to continue our work of delivering research results to interested audience. The ICT field is changing rapidly and we are constantly searching for cutting edge articles that open

  16. From the Editor

    Directory of Open Access Journals (Sweden)

    Senar, J. C.

    2014-12-01

    Full Text Available In 2001, the Natural History Museum of Barcelona remodelled its journal Miscel·lània Zoològica as Animal Biodiversity and Conservation. One of the aims of this change was to obtain an impact factor, the index that characterises the international ranking of journals. This milestone was reached some years later, in 2012, having published 291 articles that have been cited in impact journals 1,626 times. Two of these papers have been cited more than 100 times. We are now ready to take the next step forward. Our new challenge is to increase our impact factor so that Animal Biodiversity and Conservation is comparable with prestigious international journals in the field. To meet this objective we have assembled a team of editors with international recognition, and we will continue to expand this team over time. We have sought support from the most prestigious Spanish scientific societies and three have accepted the task: the Spanish Society of Ethology, the Spanish Association of Terrestrial Ecology, and the Spanish Society of Evolutionary Biology. These societies have named thematic editors who will help us strengthen their respective disciplines. This means that we will also expand the range of fields covered in the journal in future, interpreting the expression animal biodiversity in the journal´s title in its widest sense. Another front that we have opened to boost Animal Biodiversity and Conservation is the new webpage, remodelled for use as a medium to post our published papers. With this move we not only hope to improve our services to readers but also look towards open access, open access in its broadest conception, offering the journal to scientists, both readers and authors, free of charge. If we want science and the knowledge it generates —produced with public money— to belong to us all, we not only have to enable everyone to read it but we also have to help everyone publish, independently of their economic state. These are difficult

  17. Payments by US pharmaceutical and medical device manufacturers to US medical journal editors: retrospective observational study.

    Science.gov (United States)

    Liu, Jessica J; Bell, Chaim M; Matelski, John J; Detsky, Allan S; Cram, Peter

    2017-10-26

    Objective  To estimate financial payments from industry to US journal editors. Design  Retrospective observational study. Setting  52 influential (high impact factor for their specialty) US medical journals from 26 specialties and US Open Payments database, 2014. Participants  713 editors at the associate level and above identified from each journal's online masthead. Main outcome measures  All general payments (eg, personal income) and research related payments from pharmaceutical and medical device manufacturers to eligible physicians in 2014. Percentages of editors receiving payments and the magnitude of such payments were compared across journals and by specialty. Journal websites were also reviewed to determine if conflict of interest policies for editors were readily accessible. Results  Of 713 eligible editors, 361 (50.6%) received some (>$0) general payments in 2014, and 139 (19.5%) received research payments. The median general payment was $11 (£8; €9) (interquartile range $0-2923) and the median research payment was $0 ($0-0). The mean general payment was $28 136 (SD $415 045), and the mean research payment was $37 963 (SD $175 239). The highest median general payments were received by journal editors from endocrinology ($7207, $0-85 816), cardiology ($2664, $0-12 912), gastroenterology ($696, $0-20 002), rheumatology ($515, $0-14 280), and urology ($480, $90-669). For high impact general medicine journals, median payments were $0 ($0-14). A review of the 52 journal websites revealed that editor conflict of interest policies were readily accessible (ie, within five minutes) for 17/52 (32.7%) of journals. Conclusions  Industry payments to journal editors are common and often large, particularly for certain subspecialties. Journals should consider the potential impact of such payments on public trust in published research. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a

  18. Optimisation Of Cutting Parameters Of Composite Material Laser Cutting Process By Taguchi Method

    Science.gov (United States)

    Lokesh, S.; Niresh, J.; Neelakrishnan, S.; Rahul, S. P. Deepak

    2018-03-01

    The aim of this work is to develop a laser cutting process model that can predict the relationship between the process input parameters and resultant surface roughness, kerf width characteristics. The research conduct is based on the Design of Experiment (DOE) analysis. Response Surface Methodology (RSM) is used in this work. It is one of the most practical and most effective techniques to develop a process model. Even though RSM has been used for the optimization of the laser process, this research investigates laser cutting of materials like Composite wood (veneer)to be best circumstances of laser cutting using RSM process. The input parameters evaluated are focal length, power supply and cutting speed, the output responses being kerf width, surface roughness, temperature. To efficiently optimize and customize the kerf width and surface roughness characteristics, a machine laser cutting process model using Taguchi L9 orthogonal methodology was proposed.

  19. Beacon Editor: Capturing Signal Transduction Pathways Using the Systems Biology Graphical Notation Activity Flow Language.

    Science.gov (United States)

    Elmarakeby, Haitham; Arefiyan, Mostafa; Myers, Elijah; Li, Song; Grene, Ruth; Heath, Lenwood S

    2017-12-01

    The Beacon Editor is a cross-platform desktop application for the creation and modification of signal transduction pathways using the Systems Biology Graphical Notation Activity Flow (SBGN-AF) language. Prompted by biologists' requests for enhancements, the Beacon Editor includes numerous powerful features for the benefit of creation and presentation.

  20. Optimization of Injection Molding Parameters for HDPE/TiO2 Nanocomposites Fabrication with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis

    Directory of Open Access Journals (Sweden)

    Hifsa Pervez

    2016-08-01

    Full Text Available The current study presents an investigation on the optimization of injection molding parameters of HDPE/TiO2 nanocomposites using grey relational analysis with the Taguchi method. Four control factors, including filler concentration (i.e., TiO2, barrel temperature, residence time and holding time, were chosen at three different levels of each. Mechanical properties, such as yield strength, Young’s modulus and elongation, were selected as the performance targets. Nine experimental runs were carried out based on the Taguchi L9 orthogonal array, and the data were processed according to the grey relational steps. The optimal process parameters were found based on the average responses of the grey relational grades, and the ideal operating conditions were found to be a filler concentration of 5 wt % TiO2, a barrel temperature of 225 °C, a residence time of 30 min and a holding time of 20 s. Moreover, analysis of variance (ANOVA has also been applied to identify the most significant factor, and the percentage of TiO2 nanoparticles was found to have the most significant effect on the properties of the HDPE/TiO2 nanocomposites fabricated through the injection molding process.

  1. Optimization of Injection Molding Parameters for HDPE/TiO2 Nanocomposites Fabrication with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis

    Science.gov (United States)

    Pervez, Hifsa; Mozumder, Mohammad S.; Mourad, Abdel-Hamid I.

    2016-01-01

    The current study presents an investigation on the optimization of injection molding parameters of HDPE/TiO2 nanocomposites using grey relational analysis with the Taguchi method. Four control factors, including filler concentration (i.e., TiO2), barrel temperature, residence time and holding time, were chosen at three different levels of each. Mechanical properties, such as yield strength, Young’s modulus and elongation, were selected as the performance targets. Nine experimental runs were carried out based on the Taguchi L9 orthogonal array, and the data were processed according to the grey relational steps. The optimal process parameters were found based on the average responses of the grey relational grades, and the ideal operating conditions were found to be a filler concentration of 5 wt % TiO2, a barrel temperature of 225 °C, a residence time of 30 min and a holding time of 20 s. Moreover, analysis of variance (ANOVA) has also been applied to identify the most significant factor, and the percentage of TiO2 nanoparticles was found to have the most significant effect on the properties of the HDPE/TiO2 nanocomposites fabricated through the injection molding process. PMID:28773830

  2. Process parameters optimization for synthesis of methyl ester from sunflower oil using Taguchi technique

    Directory of Open Access Journals (Sweden)

    G. Senthilkumar

    2014-09-01

    Full Text Available In this work, transesterification of sunflower oil for obtaining biodiesel was studied. Taguchi’s methodology (L9 orthogonal array was selected to optimize the most significant variables (methanol, catalyst concentration and stirrer speed in transesterification process. Experiments have conducted based on development of L9 orthogonal array by using Taguchi technique. Analysis of Variance (ANOVA and the regression equations were used to find the optimum yield of sunflower methyl ester under the influence of methanol, catalyst & stirrer speed. The study resulted in a maximum yield of sun flower methyl ester as 96% with the optimal conditions of methanol 110 ml with 0.5% by wt. of sodium hydroxide (NaOH stirred at 1200 rpm. The yield was analyzed on the basis of “larger is better”. Finally, confirmation tests were carried out to verify the experimental results.

  3. Effective gene editing by high-fidelity base editor 2 in mouse zygotes

    Directory of Open Access Journals (Sweden)

    Puping Liang

    2017-06-01

    Full Text Available ABSTRACT Targeted point mutagenesis through homologous recombination has been widely used in genetic studies and holds considerable promise for repairing disease-causing mutations in patients. However, problems such as mosaicism and low mutagenesis efficiency continue to pose challenges to clinical application of such approaches. Recently, a base editor (BE system built on cytidine (C deaminase and CRISPR/Cas9 technology was developed as an alternative method for targeted point mutagenesis in plant, yeast, and human cells. Base editors convert C in the deamination window to thymidine (T efficiently, however, it remains unclear whether targeted base editing in mouse embryos is feasible. In this report, we generated a modified high-fidelity version of base editor 2 (HF2-BE2, and investigated its base editing efficacy in mouse embryos. We found that HF2-BE2 could convert C to T efficiently, with up to 100% biallelic mutation efficiency in mouse embryos. Unlike BE3, HF2-BE2 could convert C to T on both the target and non-target strand, expanding the editing scope of base editors. Surprisingly, we found HF2-BE2 could also deaminate C that was proximal to the gRNA-binding region. Taken together, our work demonstrates the feasibility of generating point mutations in mouse by base editing, and underscores the need to carefully optimize base editing systems in order to eliminate proximal-site deamination.

  4. EDITORIAL: Outgoing Editor-in-Chief Outgoing Editor-in-Chief

    Science.gov (United States)

    Hauptmann, Peter

    2012-01-01

    I started in 2002 as Editor-in-Chief of a well established journal—MST (Measurement Science and Technology). It was a time when modern means of communication offered new opportunities for the scientific community—for all scientists and engineers whether at universities, in industry or at other institutions—to access better quality information in a shorter time. This development helped us to be more efficient in our daily scientific work and to anticipate new trends faster than before. A flood of information was created by different search engines. A few online journals or journals published in emerging countries with a similar profile to MST appeared on the market. MST had to provide new answers in response to these developments. In 2002 I postulated two requirements to the journal. Firstly, the publisher has to be up to date. My impression over the years has been that IOPP is excellently organized. That has made it easier for the board members and all our reviewers to concentrate on the scientific aspects of our input to the journal. During all my visits to Bristol or my contacts with the IOPP staff I always met very professional and enthusiastic staff members. They have not only supported and encouraged the ideas and initiatives of the Editorial Board members, but they have also worked hard on establishing one of the most effective journal operations in the field of measurement science and technology. Many authors are well aware of this. Thus I am able to declare that the first requirement for a successful journal has been met. Secondly, the scientific level has to be high and the journal should attract readers from all over the world. This task was the responsibility of the Editorial Board members and of myself. Our strategy was on the one hand to ensure continuity in MST but on the other hand to be open to new trends and developments. Examples of these new aspects of the journal are fields like micro- and nanometrology, measurement techniques for

  5. A Generic Metadata Editor Supporting System Using Drupal CMS

    Science.gov (United States)

    Pan, J.; Banks, N. G.; Leggott, M.

    2011-12-01

    Metadata handling is a key factor in preserving and reusing scientific data. In recent years, standardized structural metadata has become widely used in Geoscience communities. However, there exist many different standards in Geosciences, such as the current version of the Federal Geographic Data Committee's Content Standard for Digital Geospatial Metadata (FGDC CSDGM), the Ecological Markup Language (EML), the Geography Markup Language (GML), and the emerging ISO 19115 and related standards. In addition, there are many different subsets within the Geoscience subdomain such as the Biological Profile of the FGDC (CSDGM), or for geopolitical regions, such as the European Profile or the North American Profile in the ISO standards. It is therefore desirable to have a software foundation to support metadata creation and editing for multiple standards and profiles, without re-inventing the wheels. We have developed a software module as a generic, flexible software system to do just that: to facilitate the support for multiple metadata standards and profiles. The software consists of a set of modules for the Drupal Content Management System (CMS), with minimal inter-dependencies to other Drupal modules. There are two steps in using the system's metadata functions. First, an administrator can use the system to design a user form, based on an XML schema and its instances. The form definition is named and stored in the Drupal database as a XML blob content. Second, users in an editor role can then use the persisted XML definition to render an actual metadata entry form, for creating or editing a metadata record. Behind the scenes, the form definition XML is transformed into a PHP array, which is then rendered via Drupal Form API. When the form is submitted the posted values are used to modify a metadata record. Drupal hooks can be used to perform custom processing on metadata record before and after submission. It is trivial to store the metadata record as an actual XML file

  6. QUALIDADE DE CONTEÚDO, O GRANDE DESAFIO PARA OS EDITORES CIENTÍFICOS/ CALIDAD DEL CONTENIDO, EL GRAN DESAFÍO PARA LOS EDITORES CIENTÍFICOS/ QUALITY OF CONTENT, THE GREAT CHALLENGE FOR SCIENTIFIC EDITORS

    Directory of Open Access Journals (Sweden)

    Tatiana Plata-Caviedes

    2012-07-01

    Full Text Available Discutem-se alguns problemas que atualmente afetam a qualidade do conteúdo das revistas científicas e ressalta-se o papel dos editores como responsáveis pela definição tanto da direção (o que se fará como da profundidade (até que ponto se avançará das pesquisas. Propõe-se que a relação ótima entre ambas se alcança a partir de um equilíbrio entre as três logias: terminologia, epistemologia e metodologia. Sob esta fundamentação, apresenta-se uma taxonomia para avaliação e análise de projetos de pesquisa, artigos e pareceres científicos. Conclui-se com propostas de ação específicas para todos os atores envolvidos na geração e difusão do conhecimento (autores, revisores, agências de fomento, instituições que publicam revistas e editores científicos, orientadas a melhorar a qualidade do conteúdo das publicações.

  7. From the Editors

    Directory of Open Access Journals (Sweden)

    Jason Harshman

    2016-11-01

    Full Text Available Teaching about globalizations and our interconnectedness with people and places around the world is an essential component of K-12 and higher education, but knowledge about global issues and news is not enough. Increased mobility, digital communication, and cultural hybridity, along with oppression and social injustice require that educators and students not only be able to communicate and collaborate with people different from them, but regularly engage in critical self-reflection around perceived norms and values. In January 2016, the editors of this special issue distributed a call for theoretical, research-based, and practitioner oriented manuscripts on teaching and learning that bring social studies and global citizenship education together. Evidence by the transnational contributions published within this issue of the Journal of Social Studies Education Research, the place of global citizenship education within the social studies is evolving, multifaceted, and not without complications. In short: just how it should be.

  8. [Development of an optimized formulation of damask marmalade with low energy level using Taguchi methodology].

    Science.gov (United States)

    Villarroel, Mario; Castro, Ruth; Junod, Julio

    2003-06-01

    The goal of this present study was the development of an optimized formula of damask marmalade low in calories applying Taguchi methodology to improve the quality of this product. The selection of this methodology lies on the fact that in real life conditions the result of an experiment frequently depends on the influence of several variables, therefore, one expedite way to solve this problem is utilizing factorial desings. The influence of acid, thickener, sweetener and aroma additives, as well as time of cooking, and possible interactions among some of them, were studied trying to get the best combination of these factors to optimize the sensorial quality of an experimental formulation of dietetic damask marmalade. An orthogonal array L8 (2(7)) was applied in this experience, as well as level average analysis was carried out according Taguchi methodology to determine the suitable working levels of the design factors previously choiced, to achieve a desirable product quality. A sensory trained panel was utilized to analyze the marmalade samples using a composite scoring test with a descriptive acuantitative scale ranging from 1 = Bad, 5 = Good. It was demonstrated that the design factors sugar/aspartame, pectin and damask aroma had a significant effect (p < 0.05) on the sensory quality of the marmalade with 82% of contribution on the response. The optimal combination result to be: citric acid 0.2%; pectin 1%; 30 g sugar/16 mg aspartame/100 g, damask aroma 0.5 ml/100 g, time of cooking 5 minutes. Regarding chemical composition, the most important results turned out to be the decrease in carbohydrate content compaired with traditional marmalade with a reduction of 56% in coloric value and also the amount of dietary fiber greater than similar commercial products. Assays of storage stability were carried out on marmalade samples submitted to different temperatures held in plastic bags of different density. Non percetible sensorial, microbiological and chemical changes

  9. Enhancement of anti-tubercular activity and biomass of fermented food associated Staphylococcus hominis strain MANF2 using Taguchi orthogonal array and Box-Behnken design.

    Science.gov (United States)

    Khusro, Ameer; Aarti, Chirom; Dusthackeer, Azger; Agastian, Paul

    2018-04-14

    The prime focus of the present investigation was to optimize statistically the anti-tubercular activity and biomass of fermented food associated Staphylococcus hominis strain MANF2 using Taguchi orthogonal array (OA) and Box-Behnken design (BBD). The anti-tubercular activity of strain MANF2 was determined against Mycobacterium tuberculosis H37Rv using luciferase reporter phase assay. Among varied media examined, the isolate exhibited impressive anti-tubercular activity with paramount relative light unit reduction of >90% in de Man Rogose Sharpe (MRS) broth. Primarily, the anti-tubercular activity and biomass of strain MANF2 were estimated in MRS broth by optimizing eight diversified parameters using one factor at a time (OFAT) method after working out a series of experiments. The most significant contributing factors selected through OFAT tool were optimized using Taguchi approach with a standard OA layout of L18 (2 2  × 3 6 ). Results demonstrated the significant (P ≤ 0.05) influence of pH, temperature, yeast extract, magnesium sulphate, and glycerol on response variables. These controlled variables were further optimized using BBD matrix at N = 46 by second-order polynomial equation. The fermentation medium of pH 6.5 constituting yeast extract (0.5% w/v), magnesium sulphate (0.1% w/v), and glycerol (1.5% v/v), being further incubated at 30 °C showed enhanced anti-tubercular activity (98.7%) and approximately 4 fold increment in the bacterial biomass yield (8.3 mg/mL) with respect to traditional OFAT method. Three-dimensional response plots of the quadratic model showed interdependent interaction between the significant variables. In conclusion, the present study revealed the first report on the optimization of anti-tubercular activity and biomass of S. hominis via Taguchi OA as well as BBD design, and thus, paved a path for its proficient applications in pharmaceutical industries as dynamic mycobactericidal agent in future. Copyright © 2018

  10. Preparation of nanocellulose from Imperata brasiliensis grass using Taguchi method.

    Science.gov (United States)

    Benini, Kelly Cristina Coelho de Carvalho; Voorwald, Herman Jacobus Cornelis; Cioffi, Maria Odila Hilário; Rezende, Mirabel Cerqueira; Arantes, Valdeir

    2018-07-15

    Cellulose nanoparticles (CNs) were prepared by acid hydrolysis of the cellulose pulp extracted from the Brazilian satintail (Imperata Brasiliensis) plant using a conventional and a total chlorine free method. Initially, a statistical design of experiment was carried out using Taguchi orthogonal array to study the hydrolysis parameters, and the main properties (crystallinity, thermal stability, morphology, and sizes) of the nanocellulose. X-ray diffraction (XRD), fourier-transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FE-SEM), dynamic light scattering (DLS), zeta potential and thermogravimetric analysis (TGA) were carried out to characterize the physical-chemical properties of the CNs obtained. Cellulose nanoparticles with diameter ranging from 10 to 60 nm and length between 150 and 250 nm were successfully obtained at sulfuric acid concentration of 64% (m/m), temperature 35 °C, reaction time 75 min, and a 1:20 (g/mL) pulp-to-solution ratio. Under this condition, the Imperata Brasiliensis CNs showed good stability in suspension, crystallinity index of 65%, and a cellulose degradation temperature of about 117 °C. Considering that these properties are similar to those of nanocelluloses from other lignocellulosics feedstocks, Imperata grass seems also to be a suitable source for nanocellulose production. Copyright © 2018 Elsevier Ltd. All rights reserved.

  11. Most Business Editors Find Journalism Graduates Still Unprepared

    Science.gov (United States)

    Pardue, Mary Jane

    2014-01-01

    In 2002, a study was published in "Newspaper Research Journal" that explored the preparedness of graduating journalism students to cover business news. In 2012, a follow-up survey of business editors at the nation's daily newspapers was done to see whether progress had been made in the training of journalism students for the…

  12. Publishing in Educational Psychology Journals: Comments from Editors

    Science.gov (United States)

    Nihalani, Priya K.; Mayrath, Michael C.

    2008-01-01

    The following paper emphasizes the importance of publishing and learning how to publish in educational psychology journals. We have compiled a set of recommendations based on advice from editors in the field and several other sources on how to publish. Additionally, this paper provides a step-by-step guide that graduate students and junior faculty…

  13. Adequacy of authors' replies to criticism raised in electronic letters to the editor

    DEFF Research Database (Denmark)

    Gøtzsche, Peter C; Delamothe, Tony; Godlee, Fiona

    2010-01-01

    . Inclusion criteria Research papers generating substantive criticism in the rapid responses section on bmj.com. MAIN OUTCOME MEASURES: Severity of criticism (minor, moderate, or major) as judged by two editors and extent to which the criticism was addressed by authors (fully, partly, or not) as judged by two......OBJECTIVE: To investigate whether substantive criticism in electronic letters to the editor, defined as a problem that could invalidate the research or reduce its reliability, is adequately addressed by the authors. DESIGN: Cohort study. SETTING: BMJ between October 2005 and September 2007...... editors and the critics. RESULTS: A substantive criticism was raised against 105 of 350 (30%, 95% confidence interval 25% to 35%) included research papers, and of these the authors had responded to 47 (45%, 35% to 54%). The severity of the criticism was the same in those papers as in the 58 without author...

  14. Analysis of WEDM Process Parameters on Surface Roughness and Kerf using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Asfana Banu

    2017-12-01

    Full Text Available In obtaining the best quality of engineering parts, the quality of machined surface plays an essential role. The fatigue strength, wear resistance, and corrosion of workpiece are some of the aspects of the qualities that can be improved. This paper investigates the effect of wire electrical discharge machining (WEDM process parameters on surface roughness and kerf on stainless steel using distilled water as dielectric fluid and brass wire as tool electrode. The selected process parameters are voltage open, wire speed, wire tension, voltage gap, and off time. Empirical models using Taguchi method were developed for the estimation of surface roughness and kerf. The analysis revealed that off time has major influence on surface roughness and kerf. The optimum machining parameters for minimum surface roughness and kerf were found to be 10 V open voltage, 2.84 µs off time, 12 m/min wire speed, 6.3 N wire tension, and 54.91 V voltage gap.

  15. Optimization of Tape Winding Process Parameters to Enhance the Performance of Solid Rocket Nozzle Throat Back Up Liners using Taguchi's Robust Design Methodology

    Science.gov (United States)

    Nath, Nayani Kishore

    2017-08-01

    The throat back up liners is used to protect the nozzle structural members from the severe thermal environment in solid rocket nozzles. The throat back up liners is made with E-glass phenolic prepregs by tape winding process. The objective of this work is to demonstrate the optimization of process parameters of tape winding process to achieve better insulative resistance using Taguchi's robust design methodology. In this method four control factors machine speed, roller pressure, tape tension, tape temperature that were investigated for the tape winding process. The presented work was to study the cogency and acceptability of Taguchi's methodology in manufacturing of throat back up liners. The quality characteristic identified was Back wall temperature. Experiments carried out using L 9 ' (34) orthogonal array with three levels of four different control factors. The test results were analyzed using smaller the better criteria for Signal to Noise ratio in order to optimize the process. The experimental results were analyzed conformed and successfully used to achieve the minimum back wall temperature of the throat back up liners. The enhancement in performance of the throat back up liners was observed by carrying out the oxy-acetylene tests. The influence of back wall temperature on the performance of throat back up liners was verified by ground firing test.

  16. MADM Technique Integrated with Grey- based Taguchi method for Selection of Alluminium alloys to minimize deburring cost during Drilling

    Directory of Open Access Journals (Sweden)

    Reddy Sreenivasulu

    2015-06-01

    Full Text Available Traditionally, burr problems had been considered unavoidable so that most efforts had been made on removal of the burr as a post process. Nowadays, a trend of manufacturing is an integration of the whole production flow from design to end product. Manufacturing problem issues are handled in various stages even from design stage. Therefore, the methods of describing the burr are getting much attention in recent years for the systematic approach to resolve the burr problem at various manufacturing stages. The main objective of this paper is to explore the basic concepts of MADM methods. In this study, five parameters namely speed, feed, drill size, drill geometry such as point angle and clearance angle were identified to influence more on burr formation during drilling. L 18 orthogonal array was selected and experiments were conducted as per Taguchi experimental plan for Aluminium alloy of 2014, 6061, 5035 and 7075 series. The experiment performed on a CNC Machining center with HSS twist drills. The burr size such as height and thickness were measured on exit of each hole. An optimal combination of process parameters was obtained to minimize the burr size via grey relational analysis. The output from grey based- taguchi method fed as input to the MADM. Apart from burr size strength and temperature are also considered as attributes. Finally, the results generated in MADM suggests the suitable alternative of  aluminium alloy, which results in less deburring cost, high strength and high resistance at elevated temperatures.

  17. Red's natural editor, a program designed to edit FORTRAN programs

    International Nuclear Information System (INIS)

    Cullen, D.E.

    1993-01-01

    An EDITOR code is documented which supplements the 1994 ENDF Pre-processing Code Package which is available from the IAEA Nuclear Data Section for the processing of ENDF formatted nuclear data libraries. (author)

  18. EDITORIAL: Message from the Editor

    Science.gov (United States)

    Thomas, Paul

    2009-01-01

    Plasmaphysik, Germany) V. Philipps (Forschungszentrum Juelich, Germany) S. Zweben (Princeton Plasma Physics Laboratory, USA) Y. Hirano (National Institute of Advanced Industrial Science and Technology, Japan) Y. Takase (Tokyo University, Japan) In addition there is a group of several hundred referees who have helped us in the past year to maintain the high scientific standard of Nuclear Fusion. At the end of this issue we give the full list of all referees for 2008. Our thanks to them! Authors The winner of the 2007 award was Clemente Angioni for the paper entitled `Density response to central electron heating: theoretical investigations and experimental observations in ASDEX Upgrade' (Nucl. Fusion 44 8277-845). The winner of the 2008 Nuclear Fusion award is Todd Evans et al for the paper `Suppression of large edge localized modes with edge resonant magnetic fields in high confinement DIII-D plasmas' (Nucl. Fusion 45 595-607). The awards were presented by the IAEA Deputy Director General, Werner Burkart, and the Chairman of the Board of Editors, Mitsuru Kikuchi, on 16 October 2008 at the 22nd IAEA Fusion Energy Conference in Geneva, Switzerland. Given the topicality of these papers for the ITER design, it is a matter of pride to the journal that the work should be published in Nuclear Fusion. Reviews Like many who have worked for a long time in the field, I still make use of Nuclear Fusion Reviews that go back 20 or 30 years. It is particularly useful, therefore, that the Board of Editors has been working to re-activate the review programme. The first fruits will appear in this issue, in the form of `A review of zonal flow experiments', by Akihide Fujisawa. The special procedures for Reviews should be noted: most specifically that they should normally be commissioned by the Board of Editors. However, not only is the Board of Editors working on a programme but I am sure that they would be pleased to consider suggestions for review subjects. Letters The reputation of Nuclear

  19. Improved production of tannase by Klebsiella pneumoniae using Indian gooseberry leaves under submerged fermentation using Taguchi approach.

    Science.gov (United States)

    Kumar, Mukesh; Singh, Amrinder; Beniwal, Vikas; Salar, Raj Kumar

    2016-12-01

    Tannase (tannin acyl hydrolase E.C 3.1.1.20) is an inducible, largely extracellular enzyme that causes the hydrolysis of ester and depside bonds present in various substrates. Large scale industrial application of this enzyme is very limited owing to its high production costs. In the present study, cost effective production of tannase by Klebsiella pneumoniae KP715242 was studied under submerged fermentation using different tannin rich agro-residues like Indian gooseberry leaves (Phyllanthus emblica), Black plum leaves (Syzygium cumini), Eucalyptus leaves (Eucalyptus glogus) and Babul leaves (Acacia nilotica). Among all agro-residues, Indian gooseberry leaves were found to be the best substrate for tannase production under submerged fermentation. Sequential optimization approach using Taguchi orthogonal array screening and response surface methodology was adopted to optimize the fermentation variables in order to enhance the enzyme production. Eleven medium components were screened primarily by Taguchi orthogonal array design to identify the most contributing factors towards the enzyme production. The four most significant contributing variables affecting tannase production were found to be pH (23.62 %), tannin extract (20.70 %), temperature (20.33 %) and incubation time (14.99 %). These factors were further optimized with central composite design using response surface methodology. Maximum tannase production was observed at 5.52 pH, 39.72 °C temperature, 91.82 h of incubation time and 2.17 % tannin content. The enzyme activity was enhanced by 1.26 fold under these optimized conditions. The present study emphasizes the use of agro-residues as a potential substrate with an aim to lower down the input costs for tannase production so that the enzyme could be used proficiently for commercial purposes.

  20. Interactive design optimization of magnetorheological-brake actuators using the Taguchi method

    Science.gov (United States)

    Erol, Ozan; Gurocak, Hakan

    2011-10-01

    This research explored an optimization method that would automate the process of designing a magnetorheological (MR)-brake but still keep the designer in the loop. MR-brakes apply resistive torque by increasing the viscosity of an MR fluid inside the brake. This electronically controllable brake can provide a very large torque-to-volume ratio, which is very desirable for an actuator. However, the design process is quite complex and time consuming due to many parameters. In this paper, we adapted the popular Taguchi method, widely used in manufacturing, to the problem of designing a complex MR-brake. Unlike other existing methods, this approach can automatically identify the dominant parameters of the design, which reduces the search space and the time it takes to find the best possible design. While automating the search for a solution, it also lets the designer see the dominant parameters and make choices to investigate only their interactions with the design output. The new method was applied for re-designing MR-brakes. It reduced the design time from a week or two down to a few minutes. Also, usability experiments indicated significantly better brake designs by novice users.

  1. Interactive design optimization of magnetorheological-brake actuators using the Taguchi method

    International Nuclear Information System (INIS)

    Erol, Ozan; Gurocak, Hakan

    2011-01-01

    This research explored an optimization method that would automate the process of designing a magnetorheological (MR)-brake but still keep the designer in the loop. MR-brakes apply resistive torque by increasing the viscosity of an MR fluid inside the brake. This electronically controllable brake can provide a very large torque-to-volume ratio, which is very desirable for an actuator. However, the design process is quite complex and time consuming due to many parameters. In this paper, we adapted the popular Taguchi method, widely used in manufacturing, to the problem of designing a complex MR-brake. Unlike other existing methods, this approach can automatically identify the dominant parameters of the design, which reduces the search space and the time it takes to find the best possible design. While automating the search for a solution, it also lets the designer see the dominant parameters and make choices to investigate only their interactions with the design output. The new method was applied for re-designing MR-brakes. It reduced the design time from a week or two down to a few minutes. Also, usability experiments indicated significantly better brake designs by novice users

  2. Modelling and multi objective optimization of LM13 aluminium alloy squeeze cast process parameters using taguchi and genetic algorithm

    Directory of Open Access Journals (Sweden)

    S. Vellingiri

    2018-01-01

    Full Text Available This present investigation deals with squeeze casting process in order to produce a component with good mechanical properties such as micro-hardness(VH, tensile strength(Rm, and density(ρ on LM13 by varying squeeze pressure(P, molten temperature(Tm and die temperature(Td. Taguchi experimental design L9 orthogonal array was used to determine the signal to noise ratio. The results specified that the squeeze pressure and die preheat temperature are the most influencing parameters for mechanical properties improvement. Genetic algorithm (GA has been applied to optimize the casting parameters that simultaneously maximize the responses.

  3. A Virtual Environments Editor for Driving Scenes

    Directory of Open Access Journals (Sweden)

    Ronald R. Mourant

    2003-12-01

    Full Text Available The goal of this project was to enable the rapid creation of three-dimensional virtual driving environments. We designed and implemented a high-level scene editor that allows a user to construct a driving environment by pasting icons that represent 1 road segments, 2 road signs, 3 trees and 4 buildings. These icons represent two- and three-dimensional objects that have been predesigned. Icons can be placed in the scene at specific locations (x, y, and z coordinates. The editor includes the capability of a user to "drive" a vehicle using a computer mouse for steering, accelerating and braking. At any time during the process of building a virtual environment, a user may switch to "Run Mode" and inspect the three-dimensional scene by "driving" through it using the mouse. Adjustments and additions can be made to the virtual environment by going back to "Build Mode". Once a user is satisfied with the threedimensional virtual environment, it can be saved in a file. The file can used with Java3D software that enables the traversing of three-dimensional environments. The process of building virtual environments from predesigned icons can be applied to many other application areas. It will enable novice computer users to rapidly construct and use three-dimensional virtual environments.

  4. Adolescent Sexual Initiation through the Lens of Letters to the Editor Published in Polish Teenage Magazines

    Science.gov (United States)

    Kopacz, Marek S.; Bajka-Kopacz, Aleksandra

    2012-01-01

    Almost all teenage magazines invite readers to submit questions concerning relationships, published as letters to the editor, popularly called "advice columns," often containing explicit questions about sexuality. This study aims to examine, firstly, how themes related to sexual initiation are presented in letters to the editor published…

  5. An editor's memoir: reflections and premonitions.

    Science.gov (United States)

    Kovacs, Arthur L

    2013-12-01

    The author served as the second Editor of this journal. In the article that follows, he reminisces about the state of the publication when he assumed responsibility for it and comments on the nature of the profession during the time of his incumbency. He reflects on the creative innovation and ferment in both the theories and tactics of psychotherapy unfolding during the 1970s and closes with statements of concern about developments within the field that are ominous and have come to the fore over the decades since he left office in 1983.

  6. Developing Media Module Proposed to Editor in Editorial Division

    Science.gov (United States)

    Kristanto, A.; Mustaji; Mariono, A.; Sulistiowati; Nuryati, D. W.

    2018-01-01

    In this era of technology in Indonesia, various publishers introduce themselves and participate in advancing the quality of education through the publication of various books as the learning sources. One of the publishers is PT. JP Press. In compiling the learning sources, we found some problems that are left unresolved by the editor. The purpose of this research is to overcome the problems that exist in PT. JP Press by developing media module. This development research uses the ADDIE model. The types of data used in this study are qualitative and quantitative data obtained based on the results of structured interviews with material experts and media experts, as well as the editorial response questionnaire provided for individual try-out and small group try-out. Therefore, it can be concluded that the medium of elementary school supplementary module proposed to the editors of PT. JP Press is valuable to be used in the teaching and learning activities.

  7. Near Field and Far Field Effects in the Taguchi-Optimized Design of AN InP/GaAs-BASED Double Wafer-Fused Mqw Long-Wavelength Vertical-Cavity Surface-Emitting Laser

    Science.gov (United States)

    Menon, P. S.; Kandiah, K.; Mandeep, J. S.; Shaari, S.; Apte, P. R.

    Long-wavelength VCSELs (LW-VCSEL) operating in the 1.55 μm wavelength regime offer the advantages of low dispersion and optical loss in fiber optic transmission systems which are crucial in increasing data transmission speed and reducing implementation cost of fiber-to-the-home (FTTH) access networks. LW-VCSELs are attractive light sources because they offer unique features such as low power consumption, narrow beam divergence and ease of fabrication for two-dimensional arrays. This paper compares the near field and far field effects of the numerically investigated LW-VCSEL for various design parameters of the device. The optical intensity profile far from the device surface, in the Fraunhofer region, is important for the optical coupling of the laser with other optical components. The near field pattern is obtained from the structure output whereas the far-field pattern is essentially a two-dimensional fast Fourier Transform (FFT) of the near-field pattern. Design parameters such as the number of wells in the multi-quantum-well (MQW) region, the thickness of the MQW and the effect of using Taguchi's orthogonal array method to optimize the device design parameters on the near/far field patterns are evaluated in this paper. We have successfully increased the peak lasing power from an initial 4.84 mW to 12.38 mW at a bias voltage of 2 V and optical wavelength of 1.55 μm using Taguchi's orthogonal array. As a result of the Taguchi optimization and fine tuning, the device threshold current is found to increase along with a slight decrease in the modulation speed due to increased device widths.

  8. Optimization and scale-up of fermentation of glucansucrase and branched glucan by Pediococcus pentosaceus CRAG3 using Taguchi methodology in bioreactor

    Directory of Open Access Journals (Sweden)

    RISHIKESH SHUKLA

    2012-01-01

    Full Text Available The present investigation focuses on screening and optimization of media components to enhance glucansucrase and glucan production by Pediococcus pentosaceus CRAG3 at shake-flask and bioreactor level using Taguchi orthogonal array design. A three-level Taguchi orthogonal array layout of L27 (33 was employed, in which six variables were studied for their influence on glucansucrase and glucan production. The results showed that sucrose, K2HPO4 and Tween-80 were the most significant factors to improve glucansucrase production while the glucan production was mostly affected by sucrose, peptone and K2HPO4. The optimized medium composition for maximum glucansucrase and glucan production were: sucrose 3.5% and 5%; yeast extract 0.2% and 2.0%; beef extract 0.5% and 0.5%; peptone 3.0% and 1.0%; K2HPO4 0.2% and 0.2%, and Tween-80 1.0 and 0.1%, respectively. The optimized medium gave 10.1 U/ml and 10.2 U/ml glucansucrase activity while glucan concentrations were 56 mg/ml and 80 mg/ml in shake flask and bioreactor level, respectively which were in good agreement with predicted values (10.1 U/ml and 54.5 mg/ml. The optimized medium gave 2 fold enhancement in enzyme activity and 4 fold increase in glucan concentration as compared to non-optimized medium (4.5 U/ml and 15 mg/ml, respectively at shake flask level.

  9. SimDialog: A visual game dialog editor

    OpenAIRE

    Owen, C.; Biocca, F.; Bohil, C.; Conley, J.

    2008-01-01

    SimDialog is a visual editor for dialog in computer games. This paper presents the design of SimDialog, illustrating how script writers and non-programmers can easily create dialog for video games with complex branching structures and dynamic response characteristics. The system creates dialog as a directed graph. This allows for play using the dialog with a state-based cause and effect system that controls selection of non-player character responses and can provide a basic scoring mechanism ...

  10. From the Editor Vol: 6 number 2

    OpenAIRE

    Ugur Demiray

    2005-01-01

    From the Editor Dear TOJDES Readers Time flies. Another quarter has begun. It is a great pleasure to welcome you to the 18th issue, the Volume: 6, Number: 2 of The Turkish Online Journal of Distance Education (TOJDE), of looking forward. TOJDE has been driving and shaping by our editorial board, reviewers, authors and even unbelievable readers. In the April 2005 issue, TOJDE publishes peer-reviewed distance education articles under four umbrellas: applications, feature topics, researches, ...

  11. Andrij Makuch and Frank E. Sysyn, editors. Contextualizing the Holodomor: The Impact of Thirty Years of Ukrainian Famine Studies

    Directory of Open Access Journals (Sweden)

    Johnathon Vsetecka

    2017-03-01

    Full Text Available Book review of Andrij Makuch and Frank E. Sysyn, editors. Contextualizing the Holodomor: The Impact of Thirty Years of Ukrainian Famine Studies. Canadian Institute of Ukrainian Studies P, 2015. viii, 128 pp. $24.95, paper. Conference papers first published in East/West: Journal of Ukrainian Studies, editor-in-chief, Oleh S. Ilnytzkyj, guest editors, Frank Sysyn and Andrij Makuch, vol. 2, no. 1, 2015, pp. 3-132.

  12. Magazine or journal--what is the difference? The role of the monitoring editor.

    Science.gov (United States)

    Bretscher, Anthony

    2013-04-01

    Scientific communication, career advancement, and funding decisions are all dependent on research publications. The way manuscripts are handled by high-visibility, professionally edited magazines differs from the way academic journals evaluate manuscripts, using active scientists as monitoring editors. In this essay, I discuss the benefits that come with the involvement of active scientists. I enumerate the decisions a monitoring editor has to make, and how he or she goes about making them. Finally, I indicate ways in which authors can help to make the process a smoother and more positive experience.

  13. Greetings from the Editor

    Directory of Open Access Journals (Sweden)

    Mohammad Hosein Ebrahimzadeh

    2014-09-01

    Full Text Available It is my great honor announcing the promotion of the Archives of Bone and Joint Surgery (ABJS to the level of being available on the PubMed Central site. Being precise, one year ago in September 2013, we published the first issue of the ABJS. Diligently thereafter, we published four subsequent issues with the fifth being in front of you. We set this as our first goal to reach visibility on PubMed striving to raise the quality. We greatly hope that the orthopedics science may be exalted by this voluntary contribution. Hereby, I would like to specially thank to Sarah Post Calhoun and Wayne Jack Logue, from NLM/PMC, for their continuous support, giving direction, and cooperation. I am grateful to my colleagues, Dr Amir Reza Kachooei; the Managing Editor, Dr Ali Moradi; the Editorial Manager and Saeideh Erfani; the Administrative Staff  for their endeavor and being compassionate in this path. I also would like to thank Dr Farshid Bagheri, Dr Ali Birjandinejad, Dr Farzad Omidi-Kashani and Dr Mohsen Mardani-Kivi;  the Deputy Editors  whose continuous efforts from early 2013 has brought the journal to appreciation of scientific excellence.  My sincere thanks to all Editorial Board members and reviewers, who have contributed towards the excellence of the journal by putting efforts and expending their valuable time to evaluate the submitted manuscripts. I send my special thanks to Iranian Knee Surgery Arthroscopy & Sports Traumatology (ISKAST, Iranian Orthopedic Association (IOA, Iranian Society of Shoulder and Elbow Surgeons, and Deputy of Research at Mashhad University of Medical Sciences for their supports. I would like to thank the prime industry sponsers, Osveh Asia Medical Instrument Co. and Tehran Sutures Co. (Zimmer Distributer in Iran, for their financial support. Again I would like to appreciate all contributing authors particularly my outstanding colleagues who wrote an Editorial for us, Prof. Jupiter from Harvard University, Boston, MA

  14. Optimization of an Optical Inspection System Based on the Taguchi Method for Quantitative Analysis of Point-of-Care Testing

    Directory of Open Access Journals (Sweden)

    Chia-Hsien Yeh

    2014-09-01

    Full Text Available This study presents an optical inspection system for detecting a commercial point-of-care testing product and a new detection model covering from qualitative to quantitative analysis. Human chorionic gonadotropin (hCG strips (cut-off value of the hCG commercial product is 25 mIU/mL were the detection target in our study. We used a complementary metal-oxide semiconductor (CMOS sensor to detect the colors of the test line and control line in the specific strips and to reduce the observation errors by the naked eye. To achieve better linearity between the grayscale and the concentration, and to decrease the standard deviation (increase the signal to noise ratio, S/N, the Taguchi method was used to find the optimal parameters for the optical inspection system. The pregnancy test used the principles of the lateral flow immunoassay, and the colors of the test and control line were caused by the gold nanoparticles. Because of the sandwich immunoassay model, the color of the gold nanoparticles in the test line was darkened by increasing the hCG concentration. As the results reveal, the S/N increased from 43.48 dB to 53.38 dB, and the hCG concentration detection increased from 6.25 to 50 mIU/mL with a standard deviation of less than 10%. With the optimal parameters to decrease the detection limit and to increase the linearity determined by the Taguchi method, the optical inspection system can be applied to various commercial rapid tests for the detection of ketamine, troponin I, and fatty acid binding protein (FABP.

  15. Design of Maternity Pillow by Using Kansei and Taguchi Methods

    Science.gov (United States)

    Ilma Rahmillah, Fety; Nanda kartika, Rachmah

    2017-06-01

    One of the customers’ considerations for purchasing a product is it can satisfy their feeling and emotion. It because of such product can enhance sleep quality of pregnant women. However, most of the existing product such as maternity pillows are still designed based on companies’ perspective. This study aims to capture the desire of pregnant women toward maternity pillow desired product by using kansei words and analyze the optimal design with Taguchi method. Eight collected kansei words were durable, aesthetic, comfort, portable, simple, multifunction, attractive motive, and easy to maintain. While L16 orthogonal array is used because there are three variables with two levels and four variables with four levels. It can be concluded that the best maternity pillow that can satisfy the customers can be designed by combining D1-E2-F2-G2-C1-B2-A2 means the model is U shape, flowery motive, medium color, Bag model B, cotton pillow cover, filled with silicon, and use double zipper. However, it is also possible to create combination of D1-E2-F2-G2-C1-B1-A1 by using consideration of cost which means that the zipper is switched to single as well as filled with dacron. In addition, the total percentage of contribution by using ANOVA reaches 95%.

  16. Forward by Guest Editors | Potgieter | African Journal on Conflict ...

    African Journals Online (AJOL)

    African Journal on Conflict Resolution. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 15, No 3 (2015) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Forward by Guest Editors. Cheryl Potgieter, Paulus ...

  17. 77 FR 74175 - Solicitation of Review Editors for the Draft Report of the National Climate Assessment and...

    Science.gov (United States)

    2012-12-13

    ... Climate Change Science; The NCA Long-Term Process. Dated: December 6, 2012. Jason Donaldson, Chief Financial Officer/Chief Administrative Officer, Office of Oceanic and Atmospheric Research, National Oceanic... Assessment 2013 Draft Report. Review Editor Role In the NCA Process: One Review Editor for each NCA 2013...

  18. Dry sliding wear behaviour of organo-modified montmorillonite filled epoxy nanocomposites using Taguchi's techniques

    International Nuclear Information System (INIS)

    Rashmi; Renukappa, N.M.; Suresha, B.; Devarajaiah, R.M.; Shivakumar, K.N.

    2011-01-01

    Highlights: → Successful fabrication of OMMT filled epoxy nanocomposites by high-shear mixing mehod. → Systematic tribological behaviour of the nanocomposites was made using Taguchi method. → Worn surface morphologies of the samples were discussed for different wear mechanisms. → Generation of wear data for sliding/bearing parts for different industries. -- Abstract: The aim of the research article is to study the dry sliding wear behaviour of epoxy with different wt.% of organo-modified montmorillonite (OMMT) filled nanocomposites. An orthogonal array (L 9 ) was used to investigate the influence of tribological parameters. The results indicate that the sliding distance emerges as the most significant factor affecting wear rate of epoxy nanocomposites. Experimental results showed that the inclusion of 5 wt.% OMMT nanofiller increased the wear resistance of the epoxy nanocomposite significantly. Furthermore, the worn surfaces of the samples were analyzed by scanning electron microscopy (SEM) to study the wear mechanisms and to correlate them with the wear test results.

  19. Mary Shelley as editor of Percy Shelley

    OpenAIRE

    Allen, Richard

    2001-01-01

    This chapter explores Mary Shelley's work as the founding editor of Percy Shelley's poetry. It sets out the circumstances of Mary Shelley's life after the death of Percy Shelley, her financial dependence on Percy Shelley's father, and the restrictions placed on publication by Shelley's father. It then sets out the strategies Mary Shelley used to construct a biography of Percy Shelley from the poem, thus establishing a Romantic biography of Percy Shelley which has endured into the 20th century,

  20. Guest editor

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1995-07-15

    Full text: Guest Editor for this special issue of the CERN Courier on the applications of accelerators was Dewi M. Lewis of Amersham International pic, UK. Dr. Lewis was educated at the Physics Department, University of Wales, Swansea, and learnt his accelerator physics as Engineer-in- Charge at the CERN Intersecting Storage Rings before joining industry in 1979 at the beginning of the boom for commercial cyclotrons. Having managed the installation of Amersham's second and third isotope production cyclotrons in the UK, his industrial experience encompassed isotope manufacturing and business management in radiopharmaceuticals and organization of joint ventures. Following closure of several research reactors in 1990, his responsibilities extended to reactor isotope production as well as technology transfer with international laboratories. He was responsible for creation of the first Russian 'weapons to ploughshares' joint venture with the Radioisotope Association, Mayak and the Russian Atomic Energy Ministry. Dr. Lewis currently chairs the European Radiopharmaceutical Industry's committee on future reactor isotopes and is currently involved in the technical development for accelerator technology. Amersham International is one of the world's leading isotope companies, engaged in development, manufacturing, international sales and distribution of radioisotope products in markets for healthcare, research compounds and industrial products. Formerly part of the United Kingdom Atomic Energy Agency, Amersham was one of the first companies to be privatized in 1982.

  1. Guest editor

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    Full text: Guest Editor for this special issue of the CERN Courier on the applications of accelerators was Dewi M. Lewis of Amersham International pic, UK. Dr. Lewis was educated at the Physics Department, University of Wales, Swansea, and learnt his accelerator physics as Engineer-in- Charge at the CERN Intersecting Storage Rings before joining industry in 1979 at the beginning of the boom for commercial cyclotrons. Having managed the installation of Amersham's second and third isotope production cyclotrons in the UK, his industrial experience encompassed isotope manufacturing and business management in radiopharmaceuticals and organization of joint ventures. Following closure of several research reactors in 1990, his responsibilities extended to reactor isotope production as well as technology transfer with international laboratories. He was responsible for creation of the first Russian 'weapons to ploughshares' joint venture with the Radioisotope Association, Mayak and the Russian Atomic Energy Ministry. Dr. Lewis currently chairs the European Radiopharmaceutical Industry's committee on future reactor isotopes and is currently involved in the technical development for accelerator technology. Amersham International is one of the world's leading isotope companies, engaged in development, manufacturing, international sales and distribution of radioisotope products in markets for healthcare, research compounds and industrial products. Formerly part of the United Kingdom Atomic Energy Agency, Amersham was one of the first companies to be privatized in 1982

  2. Conceptual design of a generic pulse schedule and event handling editor for improved fusion device operation

    International Nuclear Information System (INIS)

    Barana, Oliviero; Nouailletas, Rémy; Brémond, Sylvain; Moreau, Philippe; Allegretti, Ludovic; Balme, Stéphane; Ravenel, Nathalie; Mannori, Simone; Guillerminet, Bernard; Leroux, Fabrice; Douai, David; Nardon, Eric; Hertout, Patrick; Saint-Laurent, François

    2013-01-01

    Highlights: ► Real-time event handling requires extended functionalities of pulse schedule editors and plasma control systems ► A new pulse schedule editor, conceived for parameterization of systematic off-normal event handling, is described ► A global, generic approach on off-normal event handling is highlighted ► The functional architecture of an off-normal event handling oriented plasma control system is discussed ► The main objects of the pulse schedule editor are the segment-descriptor object and the scenario-descriptor object. -- Abstract: Coping with unexpected events is an important issue of nuclear fusion experiments. The future machines, characterized by very long plasma discharges and actively cooled metallic plasma-facing components, will require a systematic intervention in real time, in order to maximize the performance and protect the investment. The real-time management of events will require extending the functionalities of the current pulse schedule editors with the possibility of using reference waveforms provided with acceptability margins and setting up advanced mitigation strategies and event countermeasures. With this purpose, a new pulse schedule editor, based on a time-segment approach for the preparation of experimental scenarios, is being conceived on Tore Supra, together with a new plasma control system. This paper will report on their conceptual design and give account of the preliminary results of a feasibility study currently under way in order to prepare a possible implementation on Tore Supra

  3. Conceptual design of a generic pulse schedule and event handling editor for improved fusion device operation

    Energy Technology Data Exchange (ETDEWEB)

    Barana, Oliviero, E-mail: oliviero.barana@cea.fr [CEA, IRFM, F-13108 Saint-Paul-Lez Durance (France); Nouailletas, Rémy; Brémond, Sylvain; Moreau, Philippe; Allegretti, Ludovic; Balme, Stéphane; Ravenel, Nathalie [CEA, IRFM, F-13108 Saint-Paul-Lez Durance (France); Mannori, Simone [ENEA C.R. Brasimone, 40032 Camugnano (Italy); Guillerminet, Bernard; Leroux, Fabrice; Douai, David; Nardon, Eric; Hertout, Patrick; Saint-Laurent, François [CEA, IRFM, F-13108 Saint-Paul-Lez Durance (France)

    2013-10-15

    Highlights: ► Real-time event handling requires extended functionalities of pulse schedule editors and plasma control systems ► A new pulse schedule editor, conceived for parameterization of systematic off-normal event handling, is described ► A global, generic approach on off-normal event handling is highlighted ► The functional architecture of an off-normal event handling oriented plasma control system is discussed ► The main objects of the pulse schedule editor are the segment-descriptor object and the scenario-descriptor object. -- Abstract: Coping with unexpected events is an important issue of nuclear fusion experiments. The future machines, characterized by very long plasma discharges and actively cooled metallic plasma-facing components, will require a systematic intervention in real time, in order to maximize the performance and protect the investment. The real-time management of events will require extending the functionalities of the current pulse schedule editors with the possibility of using reference waveforms provided with acceptability margins and setting up advanced mitigation strategies and event countermeasures. With this purpose, a new pulse schedule editor, based on a time-segment approach for the preparation of experimental scenarios, is being conceived on Tore Supra, together with a new plasma control system. This paper will report on their conceptual design and give account of the preliminary results of a feasibility study currently under way in order to prepare a possible implementation on Tore Supra.

  4. Thermochemical hydrolysis of macroalgae Ulva for biorefinery: Taguchi robust design method

    Science.gov (United States)

    Jiang, Rui; Linzon, Yoav; Vitkin, Edward; Yakhini, Zohar; Chudnovsky, Alexandra; Golberg, Alexander

    2016-06-01

    Understanding the impact of all process parameters on the efficiency of biomass hydrolysis and on the final yield of products is critical to biorefinery design. Using Taguchi orthogonal arrays experimental design and Partial Least Square Regression, we investigated the impact of change and the comparative significance of thermochemical process temperature, treatment time, %Acid and %Solid load on carbohydrates release from green macroalgae from Ulva genus, a promising biorefinery feedstock. The average density of hydrolysate was determined using a new microelectromechanical optical resonator mass sensor. In addition, using Flux Balance Analysis techniques, we compared the potential fermentation yields of these hydrolysate products using metabolic models of Escherichia coli, Saccharomyces cerevisiae wild type, Saccharomyces cerevisiae RN1016 with xylose isomerase and Clostridium acetobutylicum. We found that %Acid plays the most significant role and treatment time the least significant role in affecting the monosaccharaides released from Ulva biomass. We also found that within the tested range of parameters, hydrolysis with 121 °C, 30 min 2% Acid, 15% Solids could lead to the highest yields of conversion: 54.134-57.500 gr ethanol kg-1 Ulva dry weight by S. cerevisiae RN1016 with xylose isomerase. Our results support optimized marine algae utilization process design and will enable smart energy harvesting by thermochemical hydrolysis.

  5. Thermochemical hydrolysis of macroalgae Ulva for biorefinery: Taguchi robust design method.

    Science.gov (United States)

    Jiang, Rui; Linzon, Yoav; Vitkin, Edward; Yakhini, Zohar; Chudnovsky, Alexandra; Golberg, Alexander

    2016-06-13

    Understanding the impact of all process parameters on the efficiency of biomass hydrolysis and on the final yield of products is critical to biorefinery design. Using Taguchi orthogonal arrays experimental design and Partial Least Square Regression, we investigated the impact of change and the comparative significance of thermochemical process temperature, treatment time, %Acid and %Solid load on carbohydrates release from green macroalgae from Ulva genus, a promising biorefinery feedstock. The average density of hydrolysate was determined using a new microelectromechanical optical resonator mass sensor. In addition, using Flux Balance Analysis techniques, we compared the potential fermentation yields of these hydrolysate products using metabolic models of Escherichia coli, Saccharomyces cerevisiae wild type, Saccharomyces cerevisiae RN1016 with xylose isomerase and Clostridium acetobutylicum. We found that %Acid plays the most significant role and treatment time the least significant role in affecting the monosaccharaides released from Ulva biomass. We also found that within the tested range of parameters, hydrolysis with 121 °C, 30 min 2% Acid, 15% Solids could lead to the highest yields of conversion: 54.134-57.500 gr ethanol kg(-1) Ulva dry weight by S. cerevisiae RN1016 with xylose isomerase. Our results support optimized marine algae utilization process design and will enable smart energy harvesting by thermochemical hydrolysis.

  6. Editor's note Recent instances of author misconduct in Pramana

    Indian Academy of Sciences (India)

    The exploding nature of the amount of available scientific information in- deed makes it a very demanding job for referees and editors to catch possible cases of plagiarism. While many cases are discovered during the refereeing process, some do slip through it. We are sorry that this has happened for. Pramana in a few ...

  7. CMS Configuration Editor: GUI based application for user analysis job

    International Nuclear Information System (INIS)

    Cosa, A de

    2011-01-01

    We present the user interface and the software architecture of the Configuration Editor for the CMS experiment. The analysis workflow is organized in a modular way integrated within the CMS framework that organizes in a flexible way user analysis code. The Python scripting language is adopted to define the job configuration that drives the analysis workflow. It could be a challenging task for users, especially for newcomers, to develop analysis jobs managing the configuration of many required modules. For this reason a graphical tool has been conceived in order to edit and inspect configuration files. A set of common analysis tools defined in the CMS Physics Analysis Toolkit (PAT) can be steered and configured using the Config Editor. A user-defined analysis workflow can be produced starting from a standard configuration file, applying and configuring PAT tools according to the specific user requirements. CMS users can adopt this tool, the Config Editor, to create their analysis visualizing in real time which are the effects of their actions. They can visualize the structure of their configuration, look at the modules included in the workflow, inspect the dependences existing among the modules and check the data flow. They can visualize at which values parameters are set and change them according to what is required by their analysis task. The integration of common tools in the GUI needed to adopt an object-oriented structure in the Python definition of the PAT tools and the definition of a layer of abstraction from which all PAT tools inherit.

  8. Nota breve del editor y traductor de la «Ética nicomaquea»

    OpenAIRE

    Batalla, Josep

    2017-01-01

    Una breu exposició de les dificultats en l'edició de l'Ètica nicomaquea d'Aristòtil i una breu presentació del mode de resoldre-les escollit per l'editor. This note provides a summary explanation of the difficulties in editing the Nicomachean Ethics of Aristotle and a brief presentation of the way the editor has chosen to resolve them. Una breve exposición de las dificultades en la edición de la Ética nicomaquea de Aristóteles y una breve presentación del modo de resolverlas escogido po...

  9. Diseño e implementación de servicios WFS y WMS para editores cartográficos

    OpenAIRE

    Sena García, Jéssica

    2010-01-01

    Este proyecto ha consistido en el diseño e implementación de servicios WFS y WMS siguiendo los estándares definidos por el Open Geospatial Consortium (OGC), y en el diseño e implementación de dos editores que los utilizan. El primero de ellos ha sido un editor de legalizaciones de la red eléctrica, basado en OpenLayers, y que ha sido integrado en otra aplicación ya existente en la empresa a la que iba destinado, Endesa. El segundo ha sido un editor de la red eléctrica, también basado en OpenL...

  10. A Java Chemical Structure Editor Supporting the Modular Chemical Descriptor Language (MCDL

    Directory of Open Access Journals (Sweden)

    Andrei A. Gakh

    2006-03-01

    Full Text Available A compact Modular Chemical Descriptor Language (MCDL chemical structure editor (Java applet is described. The small size (approximately 200 KB of the applet allows its use to display and edit chemical structures in various Internet applications. The editor supports the MCDL format, in which structures are presented in compact canonical form and is capable of restoring bond orders as well as of managing atom and bond drawing overlap. A small database of cage and large cyclic fragment is used for optimal representation of difficult-to-draw molecules. The improved algorithm of the structure diagram generation can be used for other chemical notations that lack atomic coordinates (SMILES, InChI.

  11. Predatory Journals and Perished Articles; a Letter to Editor

    OpenAIRE

    Narimani, Mashallah; Dadkhah, Mehdi

    2017-01-01

    In recent years, academic publishing has been faced with many destructive phenomena. “Predatory publishers” (or journals) are one challenge for  cholarly publishing. This term was introduced to academic societies for the first time by Jeffrey Beall in 2010. This letter to editor is about predatory journals and perished articles in the field of emergency medicine.

  12. [Stanisława Adamowiczowa--first editor in-chief of Journal "Przeglad Epidemiologiczny"].

    Science.gov (United States)

    Gromulska, Marta

    2010-01-01

    First issue of Epidemiological Review was published in 1920. First editor in chief was Stanisława Adamowiczowa, PhD (1888-1965), who had worked in National Central Epidemiological Institute since 1919, and later, for period of 45 years, interrupted by breaks resulting from political situation, worked in National Institute of Hygiene. In this jubilee article, we present scientific resume of S. Adamowiczowa which focuses on her achievements in infectious diseases epidemiology, and particularly in analysis and evaluation of current epidemiological data distribution in Poland and worldwide in the period. She was the pioneer in systemic organization of registries of new cases of diseases in the highly populated Polish cities; she initiated use of statistical methods in this field. As editor in chief of Epidemiological Review, she started publishing Epidemiological Chronicle, which is continuously added as a supplement to every second issue, each year. Name of S. Adamowiczowa is associated with Ludwik Rajchman--director of Hygiene Section in League of Nations, with Witold Chodźko PhD--she led courses in National School of Hygiene in Warsaw, with prof. Marcin Kacprzak--as co-author and co-editor of books on hygiene and epidemiology. A brief list of scientific publications of S. Adamowiczowa is also presented.

  13. Real time processing of neutron monitor data using the edge editor algorithm

    Directory of Open Access Journals (Sweden)

    Mavromichalaki Helen

    2012-09-01

    Full Text Available The nucleonic component of the secondary cosmic rays is measured by the worldwide network of neutron monitors (NMs. In most cases, a NM station publishes the measured data in a real time basis in order to be available for instant use from the scientific community. The space weather centers and the online applications such as the ground level enhancement (GLE alert make use of the online data and are highly dependent on their quality. However, the primary data in some cases are distorted due to unpredictable instrument variations. For this reason, the real time primary data processing of the measured data of a station is necessary. The general operational principle of the correction algorithms is the comparison between the different channels of a NM, taking advantage of the fact that a station hosts a number of identical detectors. Median editor, Median editor plus and Super editor are some of the correction algorithms that are being used with satisfactory results. In this work an alternative algorithm is proposed and analyzed. The new algorithm uses a statistical approach to define the distribution of the measurements and introduces an error index which is used for the correction of the measurements that deviate from this distribution.

  14. xLPR Sim Editor 1.0 User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Mariner, Paul

    2017-03-01

    The United States Nuclear Regulatory Commission in cooperation with the Electric Power Research Institute contracted Sandia National Laboratories to develop the framework of a probabilistic fracture mechanics assessment code called xLPR ( Extremely Low Probability of Rupture) Version 2.0 . The purpose of xLPR is to evaluate degradation mechanisms in piping systems at nuclear power plants and to predict the probability of rupture. This report is a user's guide for xLPR Sim Editor 1.0 , a graphical user interface for creating and editing the xLPR Version 2.0 input file and for creating, editing, and using the xLPR Version 2.0 database files . The xLPR Sim Editor, provides a user - friendly way for users to change simulation options and input values, s elect input datasets from xLPR data bases, identify inputs needed for a simulation, and create and modify an input file for xLPR.

  15. FlaME: Flash Molecular Editor - a 2D structure input tool for the web

    Directory of Open Access Journals (Sweden)

    Dallakian Pavel

    2011-02-01

    Full Text Available Abstract Background So far, there have been no Flash-based web tools available for chemical structure input. The authors herein present a feasibility study, aiming at the development of a compact and easy-to-use 2D structure editor, using Adobe's Flash technology and its programming language, ActionScript. As a reference model application from the Java world, we selected the Java Molecular Editor (JME. In this feasibility study, we made an attempt to realize a subset of JME's functionality in the Flash Molecular Editor (FlaME utility. These basic capabilities are: structure input, editing and depiction of single molecules, data import and export in molfile format. Implementation The result of molecular diagram sketching in FlaME is accessible in V2000 molfile format. By integrating the molecular editor into a web page, its communication with the HTML elements on this page is established using the two JavaScript functions, getMol( and setMol(. In addition, structures can be copied to the system clipboard. Conclusion A first attempt was made to create a compact single-file application for 2D molecular structure input/editing on the web, based on Flash technology. With the application examples presented in this article, it could be demonstrated that the Flash methods are principally well-suited to provide the requisite communication between the Flash object (application and the HTML elements on a web page, using JavaScript functions.

  16. From the Editor-in-Chief

    Directory of Open Access Journals (Sweden)

    Simeon Oka

    2010-01-01

    Full Text Available The Editorial Board of the journal Thermal Science is continuing to pay great attention to the processes in internal combustion engines, both due to their environmental impact and ability to use renewable energy sources i. e. different types of biofuels. Concerning that motor vehicles contribute about 14% of the global CO2 emission, it is understandable that many research efforts are devoted to processes in internal combustion engines and use of biofuels. The number of submitted papers dealing with processes in internal combustion engines is growing from months to months, so in the journal Thermal Science also will published in 2011 one issue devoted to the same topics. Papers submitted are already in the reviewing process. Professor Dragoslava Stojiljkovi} and Professor Stojan Petrovi} as Guest editors, had again a difficult task to make appropriate choice of the papers, covering wide range of topics. I am very grateful to Guest editors for their extremely competent choice of the topics and papers. Reviewers of the papers made, also, tremendous contributions to the quality of the papers published. This time, also, as in No. 3, 2009, we asked experts in traffic engineering to give their contribution. They pointed out importance of the internal combustion engine energy efficiency, vehicle fleet operation management and logistic efficiency, and painted large scale picture of the environmental problems caused by large density traffic. We hope that this point of view will make new impulse for many new joint projects with the aim to investigate impact of the processes in internal combustion engines and logistic of motor fleet management, and organization of traffic flows, especially in large towns, on environment. Papers devoted to the thermal processes in internal combustion engines are grouped in Part one of this issue. Due to large number of papers accepted for publication, we have been forced to introduce Part two, in which are grouped selected

  17. Optimization of the pulsed current gas tungsten arc welding (PCGTAW) parameters for corrosion resistance of super duplex stainless steel (UNS S32760) welds using the Taguchi method

    International Nuclear Information System (INIS)

    Yousefieh, M.; Shamanian, M.; Saatchi, A.

    2011-01-01

    Research highlights: → Among the four factors and three levels tested, it was concluded that the pulse current had the most significant effect on the pitting potential and the background current had the next most significant effect. The effects of pulse frequency and % on time are less important when compared to the other factors. → The percentage contributions of the pulse current, the background current, % on time, and pulse frequency to the corrosion resistance are 66.28%, 25.97%, 2.71% and 5.04%, respectively. → The optimum conditions within the selected parameter values were found as the second level of pulse current (120 A), second level of background current (60 A), third level of % on time (80%) and third level of pulse frequency (5 Hz). → The confirmation test was carried out at optimum working conditions. Pitting potential was increased to 1.06 V SCE by setting the control factors. Predicted (1.04 V SCE ) and observed (1.06 V SCE ) pitting potential values are close to each other, which are the highest values obtained in the present study. - Abstract: In the present work, a design of experiment (DOE) technique, the Taguchi method, has been used to optimize the pulsed current gas tungsten arc welding (PCGTAW) parameters for the corrosion resistance of super duplex stainless steel (UNS S32760) welds. A L 9 (3 4 ) orthogonal array (OA) of Taguchi design which involves nine experiments for four parameters (pulse current, background current, % on time, pulse frequency) with three levels was used. Corrosion resistance in 3.5%NaCl solution was evaluated by anodic polarization tests at room temperature. Analysis of variance (ANOVA) is performed on the measured data and S/N (signal to noise) ratios. The higher the better response category was selected to obtain optimum conditions. The optimum conditions providing the highest pitting potential were estimated. The optimum conditions were found as the second level of pulse current (120 A), second level of

  18. Conflicts of interest in biomedical publications: considerations for authors, peer reviewers, and editors.

    Science.gov (United States)

    Gasparyan, Armen Yuri; Ayvazyan, Lilit; Akazhanov, Nurbek A; Kitas, George D

    2013-12-01

    This article overviews evidence on common instances of conflict of interest (COI) in research publications from general and specialized fields of biomedicine. Financial COIs are viewed as the most powerful source of bias, which may even distort citation outcomes of sponsored publications. The urge to boost journal citation indicators by stakeholders of science communication is viewed as a new secondary interest, which may compromize the interaction between authors, peer reviewers and editors. Comprehensive policies on disclosure of financial and non-financial COIs in scholarly journals are presented as proxies of their indexing in evidence-based databases, and examples of successful medical journals are discussed in detail. Reports on clinical trials, systematic reviews, meta-analyses and clinical practice guidelines may be unduly influenced by author-pharmaceutical industry relations, but these publications do not always contain explicit disclosures to allow the readers to judge the reliability of the published conclusions and practice-changing recommendations. The article emphasizes the importance of adhering to the guidance on COI from learned associations such as the International Committee of Medical Journal Editors (ICMJE). It also considers joint efforts of authors, peer reviewers and editors as a foundation for appropriately defining and disclosing potential COIs.

  19. Carta del editor

    Directory of Open Access Journals (Sweden)

    Oscar Mauricio Covarrubias-Moreno

    2014-05-01

    Full Text Available Henos aquí con un nuevo número de RIESED. Después de casi un año de ver la luz, y como lo anticipábamos en la carta del editor que acompañaba al número fundacional, hacer una revista electrónica no ha sido una tarea sencilla. Un año más tarde no podemos sino confirmar esa opinión.Gracias al decidido trabajo de los autores, revisores y miembros del equipo editorial hemos podido hacerlo. El proceso de revisión de los artículos ha merecido un cuidado, dedicación y tiempo especiales, que hicieron necesario demorar unos días la fecha de publicación de este tercer número. Asumimos un compromiso con la calidad y estamos convencidos que esa es la única posibilidad de éxito para una revista científica. El contenido y nivel de los artículos disponibles servirá sin duda como incentivo para que los investigadores deseen publicar sus aportes en RIESED.Agradezco especialmente a la Dra. Gloria Rosique Cedillo, Editora Invitada y Coordinadora de este tercer número, así como al investigador César Nicandro Cruz-Rubio, Editor Asociado, apreciados colegas con quienes he tenido el privilegio de trabajar a lo largo de estos meses, y cuya dedicación y esmero han hecho posible RIESED 3.Por otra parte, derivado de nuestro proyecto editorial informo a ustedes de la creación de la Cátedra RIESED. Educación y Sociedad. Esta Cátedra es una iniciativa que la Universidad del Desarrollo Empresarial y Pedagógico ha impulsado en estrecha colaboración con el Grupo de Investigación en Gobierno Administración y Políticas Públicas (GIGAPP del Instituto Universitario de Investigación Ortega y Gasset (IUIOG, Fundación Ortega – Marañón; así como, con la Academia Internacional de Ciencias Político Administrativas y Estudios de Futuro A.C.La Cátedra está concebida como un espacio de diálogo y reflexión interdisciplinario sobre las diferentes temáticas abordadas en RIESED. En el marco de esta iniciativa académica, se invita a los miembros

  20. Scientific style and format: the CSE manual for authors, editors, and publishers

    National Research Council Canada - National Science Library

    Council of Science Editors. Style Manual Committee

    2006-01-01

    Scientific style and format : the CSE manual for authors, editors, and publishers is a detailed and authoritative manual recommending both general and scientific publication style and format for scientific papers, journal...

  1. Letter from the Editor

    Directory of Open Access Journals (Sweden)

    Germán A. Prieto

    2018-01-01

    Full Text Available Letter from the editor Our first issue of 2018 is available now. We have 9 articles in this issue, in topics ranging from soil characterization, petrophysical properties of rocks, signal processing of images and GNSS station to asteroid impact effects. Mechanical soil properties in sandy-pebble soil are studied as a function of grain size content in Lu et al. Satellite-derived soil moisture estimation is discussed in Thanabalan and Vidhya, based on a semi-empirical approach and backscattering images. Macroscopic mechanical characteristics of rocks depend on a number of factors, including microstructure damage. Under changing temperature conditions (freeze-thaw rock samples studied by Jiang show significant strength decrease, which has important consequences in engineering. Advanced signal processing methods are used in Zeng et al. for image retrieval applied to remote sensing data, using a Bayesian network approach. Similarly, Oktar and Erdogan use linear trend and wavelet analysis to continuous GNSS data showing both displacements due to tectonic as well as atmospheric and hydrologic effects. Debris flows can in some cases become serious hazards because they can block river flow as a debris flow dam. Chen et al. propose a method to identify the formation of such dams, with an example from the Er river in Taiwan. Mamaseni et al. study the petrophysical properties of three formations in the Duhok Basin, northern Iran, based on well-log data. Results suggest a significant thickness with good moveable hydrocarbons in the study area. Methane adsorption and gas content are strongly influenced by shale composition. Zhu et al. show that Total Organic Content has a stronger influence on methane adsorption and gas content than the mineral composition, studying samples from the southern Sichuan Basin. Our last contribution in this issue discussed a large asteroid impact in eastern Colombia. The impact would have affected the environment and landscape, but

  2. Multiple performance optimization of electrochemical drilling of Inconel 625 using Taguchi based Grey Relational Analysis

    Directory of Open Access Journals (Sweden)

    N. Manikandan

    2017-04-01

    Full Text Available In this present investigation, a multi performance characteristics optimization based on Taguchi approach with Grey Relational Analysis (GRA is proposed for Electrochemical Drilling process on Inconel 625 material which is used for marine, nuclear, aerospace applications, especially in corrosive environments. Experimental runs have been planned as per Taguchi’s principle with three input machining variables such as feed rate, flow rate of electrolyte and concentration of electrolyte. Besides the material removal rate and surface roughness, the geometric measures such as overcut, form and orientation tolerance are included as performance measures in this investigation. Outcomes of the analysis show that the feed rate is the predominant variable for the desired performance characteristics. On establishing the desired performance measures and multiple regression models are developed to be used as predictive tools. The confirmation test also conducted to validate the results attained by GRA approach and affirmed that there is considerable improvement with the help of proposed approach.

  3. Journalism Education 2016 Vol 5(2): Guest Editor

    OpenAIRE

    Fowler-Watt, Karen

    2016-01-01

    “It’s the story that matters! Teaching journalism’s storytellers” Special Edition of Journalism Education Guest Editor: Karen Fowler-Watt, Bournemouth University, UK. Storytelling is the journalist’s craft skill. Shaped by the tenets of objectivity and accuracy, the news narrative informs the debate and brings us the human stories. If journalism is a craft, then the story is the journalist’s work of art. In a rapidly changing landscape of technological revolution, shifting business models and...

  4. Developing Integral Review:IR Editors Reflect on Meta-theory,the Concept of

    Directory of Open Access Journals (Sweden)

    Russ Volckmann

    2007-12-01

    Full Text Available Over the past three years our journey as editors of Integral Review has been full of rich learning. The processes of providing authors with feedback, going over reviews of articles as well as writing ourselves have all contributed to our growth. The primary forum for this learning has been the many conversations amongst us to deal with the various issues that arise in publishing IR. Our intention in this brief piece is to share some of our reflections on this learning journey with you. These will take the form of contributions/reflections from individual editors, allowing us to share with you the particular issues we feel of value in this process.By writing these short pieces, we aim to provide additional resources for understanding how IR works. While we have guidelines and criteria for submissions on our website, it seems that narrative voices from individuals may add some flesh to them. Relating how we perceive issues around writing for an “integral” journal offers a supplement for engaging these criteria, and will hopefully bring them to life. As well, we hope that our writing provides insights into how and what we think about issues relevant to IR’s mission. These pieces reflect the unique voices we have as editors of Integral Review, and demonstrate some of the thinking and passions behind this journal.

  5. Mentoring for text editors: Fit for purpose in the era of freelancing, more so than alternative development strategies

    Directory of Open Access Journals (Sweden)

    John Linnegar

    2015-12-01

    Full Text Available In this article, the supportive role that mentoring relationships currently do and should play in the development and careers of text editors is described against the background of the particular circumstances of these service providers in a sector experiencing great organisational and technological changes. This is a group that is much neglected in the literature on mentoring. Since the mentoring of text editors is distinct from other forms of mentoring in a number of key respects, this article draws together what the literature has to say about both conventional and online or distance mentoring as performed in a range of contexts. I consider the application of Knowles’ (1970, 1984 adult learning theory and Bandura’s (1977 self-efficacy mechanisms to be important potential contributors to the success of mentorships, in particular those involving adult text editors. The article also critically analyses how mentoring for text editors can be distinguished from alternative development strategies such as coaching, training, teaching and counselling. It shows that mentoring is fundamentally different from these strategies according to ten criteria, and is better suited to text editors’ need for professional development as a form of lifelong adult e-learning. The lack of any form of assessment of mentees, in particular, is regarded as a weakness of the currently available mentorship programmes aiming to professionalise adult text editors through a process of lifelong learning.

  6. Cover Letter Dear Editor, Please find enclosed a paper entitled ...

    African Journals Online (AJOL)

    Ajamein

    Dear Editor,. Please find enclosed a paper entitled ' Intrinsic Kinetics of Fischer- Tropsch Synthesis Over a. Promoted Iron Catalyst '. I am submitting to your journal to be considered for publication as a research paper in Bulletin of the Chemical Society of Ethiopia. The manuscript has not been previously published, is not ...

  7. Combining structural-thermal coupled field FE analysis and the Taguchi method to evaluate the relative contributions of multi-factors in a premolar adhesive MOD restoration.

    Science.gov (United States)

    Lin, Chun-Li; Chang, Yen-Hsiang; Lin, Yi-Feng

    2008-08-01

    The aim of this study was to determine the relative contribution of changes in restorative material, cavity dimensions, adhesive layer adaptation, and load conditions on the biomechanical response of an adhesive Class II MOD restoration during oral temperature changes. A validated finite-element (FE) model was used to perform the structural-thermal coupled field analyses and the Taguchi method was employed to identify the significance of each design factor in controlling the stress. The results indicated that thermal expansion in restorative material amplified the thermal effect and dominated the tooth stress value (69%) at high temperatures. The percentage contributions of the load conditions, cavity depth, and cement modulus increased the effect on tooth stress values 46%, 32%, and 14%, respectively, when the tooth temperature was returned to 37 degrees C. Load conditions were also the main factor influencing the resin cement stress values, irrespective of temperature changes. Increased stress values occurred with composite resin, lateral force, a deeper cavity, and a higher luting cement modulus. The combined use of FE analysis and the Taguchi method efficiently identified that a deeper cavity might increase the risk of a restored tooth fracture, as well as a ceramic inlay with a lower thermal expansion, attaining a proper occlusal adjustment to reduce the lateral occlusal force and low modulus luting material application to obtain a better force-transmission mechanism are recommended.

  8. EDITORIAL: New Editor-in-Chief for Nanotechnology New Editor-in-Chief for Nanotechnology

    Science.gov (United States)

    Couzin, Nina

    2009-01-01

    Nanotechnology is proud to announce the appointment of Professor Mark Reed, Yale University, as the new Editor-in-Chief from January 2009. Mark Reed holds the Harold Hodgkinson Chair of Engineering and Applied Science at Yale University. He has made significant contributions in the areas of quantum dots, electronic transport in nanoscale and mesoscopic systems, artificially structured materials and devices, and molecular electronics. Professor Reed has been associated with the journal as an Editorial Board member for a number of years and we are delighted that he has agreed to take on the scientific leadership of the journal in its 20th year. We also take the opportunity to thank Professor Mark Welland, Cambridge University, for his work as Editor-in-Chief since 2001, and for presiding over the re-launch and remarkable growth of the journal since then. Nanotechnology is unique in that it was the first peer-reviewed journal in the area of nanoscience, the first issue appearing in 1990. Since then it has established a distinguished publication record and has become a leading journal covering all aspects of nanoscale science and technology, as well as specializing in in-depth, comprehensive articles not seen in letter format journals. Published weekly and featuring subject sections, the journal is truly multidisciplinary in nature and is an excellent medium to quickly deliver your research results to readers worldwide. Nanotechnology is proud to be offering some of the fastest publication times around (less than three months on average from receipt to online publication). We offer free online access to all published papers for 30 days, ensuring that anyone with access to the internet will be able to read your paper. We were also the first journal to give our authors the opportunity to communicate their research to a wider audience through nanotechweb.org and other IOP websites. See the journal's homepage at www.iop.org/Journals/nano for more details. We are looking

  9. Editorial - Letter from the Editors

    Directory of Open Access Journals (Sweden)

    James Sidanius

    2009-12-01

    Full Text Available This time our focus section deals with the topic of ethnic and racial violence and conflict. We are grateful to our guest editors Robert D. Crutchfield (Universityof Washington, United States and Werner Bergmann (TU Berlin, Germany for putting together an appealing collection of contributions addressing this important field. As usual, our Open Section reflects the enormous breadth of our field, with articles on the theories of Clausewitz and the media’s treatment of rape incidents in kibbutzim.Aside from regular activities, the IJCV is in the process of migrating to a new content management system. From next year the journal will appear in a new online design and be easier to browse. The address will not change, though. If you have signed up for our news alerts you will receive further information in good time.

  10. Multi objective optimization of performance parameters of a single cylinder diesel engine running with hydrogen using a Taguchi-fuzzy based approach

    International Nuclear Information System (INIS)

    Bose, Probir Kumar; Deb, Madhujit; Banerjee, Rahul; Majumder, Arindam

    2013-01-01

    Environmental issues and rapid exhaustion of fossil fuels are the major concerns over the past two decades to search for alternative fuels. Among various alternatives hydrogen is a long-term renewable and least polluting fuel. Its clean burning capability helps to meet the stern emission norms. Full substitution of diesel with hydrogen may not be convenient for the time being but employing of hydrogen in a diesel engine in dual fuel mode is possible. In this experimental investigation a TMI (timed manifold injection) system has been developed using ECU (electronic control unit) with varying injection strategy to deliver hydrogen on to the intake manifold. Through adopting this technique in the existing diesel engine a momentous improvement in performance and combustion parameters has been observed. The study also attempts to explain the application of the fuzzy logic based Taguchi analysis to optimize the performance parameters i.e. BSEC (Brake specific energy consumption), Vol. Eff. (Volumetric efficiency) and BTHE (brake thermal efficiency) for the different hydrogen injection strategies. - Highlights: • A timed manifold injection system has been developed which enhances the BTHE by 31.74% at full load conditions. • Use of hydrogen-diesel dual fuel of BSEC was reduced by a maximum of 68.98% at full load condition compared to diesel. • Τhe Vol. Eff. reduced by 73.14% in dual fuel mode as compared to 77.23% at full load condition with base diesel. • A fuzzy based Taguchi's parameter design technique has been involved in multi objective optimization for prediction. • Predicted optimum combination improved BTHE and Vol. Eff. by 24.04% and 72.87% respectively and reduced BSEC by 59.03%

  11. Letters to the Editor: Tattooing gone wrong | Hampton | South African ...

    African Journals Online (AJOL)

    South African Journal of Surgery. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 55, No 1 (2017) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Letters to the Editor: Tattooing gone wrong. M I Hampton ...

  12. University-government relationships in the training of technical writers-editors

    Science.gov (United States)

    Stohrer, Freda F.; Pinelli, Thomas E.

    1979-01-01

    Traditional and nontraditional methods of training technical writers-editors are reviewed. Combining work experience with classroom instruction in the form of cooperative education provides a method of strengthening the Federal career service in professional occupations. The NASA Langley experience that successfully introduced students to the special demands of technical writing and editing is described.

  13. Advertisement for the position of “Copy Editor cum Proof Reader ...

    Indian Academy of Sciences (India)

    user

    Advertisement for the position of “Copy Editor cum. Proof Reader”. Indian Academy of Sciences (IASc), an institution under the. Department of Science & Technology, Government of India publishes scholarly journals, thematic books and other publications. The. Academy currently publishes 10 journals in various disciplines ...

  14. Conflicts of interest in biomedical publications: considerations for authors, peer reviewers, and editors

    Science.gov (United States)

    Gasparyan, Armen Yuri; Ayvazyan, Lilit; Akazhanov, Nurbek A.; Kitas, George D.

    2013-01-01

    This article overviews evidence on common instances of conflict of interest (COI) in research publications from general and specialized fields of biomedicine. Financial COIs are viewed as the most powerful source of bias, which may even distort citation outcomes of sponsored publications. The urge to boost journal citation indicators by stakeholders of science communication is viewed as a new secondary interest, which may compromize the interaction between authors, peer reviewers, and editors. Comprehensive policies on disclosure of financial and non-financial COIs in scholarly journals are presented as proxies of their indexing in evidence-based databases, and examples of successful medical journals are discussed in detail. Reports on clinical trials, systematic reviews, meta-analyses, and clinical practice guidelines may be unduly influenced by author-pharmaceutical industry relations, but these publications do not always contain explicit disclosures to allow the readers to judge the reliability of the published conclusions and practice-changing recommendations. The article emphasizes the importance of adhering to the guidance on COI from learned associations such as the International Committee of Medical Journal Editors (ICMJE). It also considers joint efforts of authors, peer reviewers, and editors as a foundation for appropriately defining and disclosing potential COIs. PMID:24382859

  15. From the Editor-in-Chief

    Directory of Open Access Journals (Sweden)

    Simeon Oka

    2010-01-01

    affiliated at the Faculty of Mechanical Engineering in Kragujevac. Guest editor, Professor Dr. Milun Babić, had an extremely difficult job to make proper selection of papers, representing research results of his Department and Faculty of Mechanical Engineering, not only in fundamental and applied research, but also in practical applications. I am greatly thankful to him since he presented not only most interesting scientific results, but also cases of best practise realized on the basis of the research results. At the same time, in his introductory review paper he explain research policy in the field of thermal sciences, energy efficiency and use of renewable energy sources having the main aim to solve more important energy and environmental problems of the local community, as well as to introduce energy management, environmental management, and sustainable development. This is one of the main characteristics of the set of papers selected by Guest editor for this Supplement issue. Realization of the full chain – fundamental research, applied research development and demonstration (R&D&D is not too often, especially in developing countries. I hope, that paper selection that made for this issue by Guest editor Professor Dr. Milun Babić, in many cases evidently presents that it is possible, even with small funds available in Serbia.

  16. THE EFFECT OF VARIOUS PARAMETERS ON DRY SLIDING WEAR BEHAVIOR AND SUBSURFACE OF AGED HYBRID METAL MATRIX COMPOSITES USING TAGUCHI TECHNIQUE

    Directory of Open Access Journals (Sweden)

    B.M. Viswanatha

    2017-06-01

    Full Text Available The effects of applied load, sliding speed and sliding distance on the dry sliding wear behavior of aged Al-SiCp-Gr composites were investigated. The specimen were fabricated by stir-casting technique. The pin-on-disc wear testing machine was used to investigate the wear rate by design of experiments based on L27 using Taguchi technique. Sliding distance was the most important variable that influenced the wear rate followed by sliding speed and applied load. The worn out surfaces were analyzed by SEM and EDS to study the subsurface mechanism of wear. The addition of reinforcements showed improved tribological behavior of the composite than base alloy.

  17. Letter from the Editor

    Science.gov (United States)

    Strassmeier, Klaus G.

    2009-01-01

    As of 2007, Astronomische Nachrichten -- Astronomical Notes has reached its all-time high regarding the ISI journal impact factor, with an impressive increase of 60% compared to 2005. We now rank at 1,461, as shown in the statistics below. This is solely due to the increased quality of the published articles: In 2006, Astronomische Nachrichten -- Astronomical Notes published 208 research papers and received 1,033 citations -- five citations per paper on average. In 2007, we have published 177 research papers with roughly the same number of citations. In co-operation with Wiley InterScience we have achieved an average online publication time of just 4.5 months. We hope that the year 2008 will be comparably prosperous. As in the past, publication in Astronomische Nachrichten -- Astronomical Notes continues to be free of charge. Also, all articles of the first issue of each volume can be downloaded free of charge, as can all articles labelled ``Editor's Choice'', which are additionally featured with a color image on the front cover.

  18. MULTIMEDIA EDITOR OF VIRTUAL PHYSICAL LABORATORY IN DISTANCE LEARNING SYSTEM «KHERSON VIRTUAL UNIVERSITY»

    Directory of Open Access Journals (Sweden)

    Kravtsov H.

    2017-12-01

    Full Text Available The questions of modeling the structure of the objects of the system, the design of software modules and technologies for creating the editor of a virtual laboratory are considered. The relevance of the study is due to the lack in existing distance learning systems of support for the creation and use of virtual laboratory work on disciplines of the natural-science profile. The subject of the study is a software module for creating and using virtual laboratory work in a distance learning system. The purpose of the study is the development of a system model and a description of the software development technology of a virtual laboratory for physics for a distance learning system. The information technologies of designing the structure of the virtual laboratory and the main modes of the program module of the editor of the virtual laboratory work are described. At the heart of the structure of the software module "Virtual Laboratory" is the multimedia Web-editor of virtual laboratory works, which is created using object-oriented design technology. The program library of multimedia 3D objects created in the development environment of interactive graphic objects Unity3D. It unifies the process of creation and processing of virtual laboratory works. The basic mathematical package for supporting calculations is the mathematical processor Waterloo Maple. The application of the developed software interface will allow teachers to create laboratory works and use them in their distance courses. Students, in turn, will be able to conduct research, performing virtual laboratory work. As an example, the editor of the virtual laboratory for physics in the distance learning system "Kherson Virtual University" is considered.

  19. CMS Configuration Editor: GUI based application for user analysis job definition

    CERN Document Server

    De Cosa, Annapaola

    2010-01-01

    We present the user interface and the software architecture of the Configuration Editor that is used by CMS physicists to configure their physics analysis tasks. Analysis workflows typically involve execution of a sequence of algorithms, and these are implemented as software modules that are integrated within the CMS software framework (CMSSW). In particular, a set of common analysis tools is provided in the so-called CMS Physics Analysis Toolkit (PAT) and these need to be steered and configured during the execution of an analysis job. The Python scripting language is used to define the job configuration that drives the analysis workflow. Configuring analysis jobs can be quite a challenging task, particularly for newcomers, and therefore a graphical tool, called the Configuration Editor, has been developed to facilitate the creation and inspection of these configuration files. Typically, a user-defined analysis workflow can be produced starting from a standard configuration file, applying and configuring PAT ...

  20. A multifunction editor for programming control sequences for a robot based radiopharmaceutical synthesis system

    International Nuclear Information System (INIS)

    Appelquist, G.; Bohm, C.

    1990-01-01

    A Multifunction Editor is a development tool for building control sequences for a robotized production system for positron emitting radiopharmaceuticals. This system consists of SCARA robot and a PC-AT personal computer as a controller together with general and synthesis specific chemistry equipment. The general equipment, which is common for many synthesis, is fixed to the wall of the hotcell, while the specific equipment, dedicated to the given synthesis, is located on a removable tray. The program recognizes commands to move the robot, to control valves and to control the computer screen. From within the editor it is possible to run the control sequence forward or backward to test it and to use the single step feature to debug. The editor commands include insert, replace and delete of commands in the sequence. When programming or editing robot movements the robot may be controlled by the mouse, from the keyboard or from a remote control box. The robot control sequence consists of a succession of stored robot positions. The screen control is used to display dynamic flowchart diagrams. This is achieved by displaying a modified picture on the screen whenever the system state has been changed significantly

  1. EDITORIAL: Letter from the Editor Letter from the Editor

    Science.gov (United States)

    Pashinin, Pavel P.

    2013-01-01

    Dear readers, contributors, and members of the world laser physics community. It is a great honour for us to introduce to you our new publishing partner, IOP Publishing, a subsidiary of the Institute of Physics, United Kingdom. IOP Publishing is a world renowned authority in producing journals, magazines, websites and services that enable researchers and research organizations to present their work to a world-wide audience. Laser Physics, the first English-language scientific journal in Russia, was founded in 1990 on the initiative of Alexander M Prokhorov, a pioneer and leader in laser physics research. Professor Prokhorov served as the first Editor-in-Chief of the journal until 2002. We are proud that it is our 23rd year of publishing Laser Physics and our 10th year of publishing Laser Physics Letters. We would like to honour the memory of our friend, late Professor Igor Yevseyev, whose enthusiasm and unwavering dedication to our journals contributed most significantly to their success. It was initially his idea in 2011 to approach IOP with a partnership proposal. We deeply regret that he is no longer with us as we enter this productive alliance. Now, in partnership with IOP, we are turning a new page in providing world-wide access to the cutting-edge research results in our journals, serving our well established global audience. We see new horizons opening for our journals for years to come and hope that our readers share our enthusiasm and aspirations. Please accept our best wishes for all your new scientific endeavors in the exciting field of laser physics.

  2. PROTOTIPE VIDEO EDITOR DENGAN MENGGUNAKAN DIRECT X DAN DIRECT SHOW

    Directory of Open Access Journals (Sweden)

    Djoni Haryadi Setiabudi

    2004-01-01

    Full Text Available Technology development had given people the chance to capture their memorable moments in video format. A high quality digital video is a result of a good editing process. Which in turn, arise the new need of an editor application. In accordance to the problem, here the process of making a simple application for video editing needs. The application development use the programming techniques often applied in multimedia applications, especially video. First part of the application will begin with the video file compression and decompression, then we'll step into the editing part of the digital video file. Furthermore, the application also equipped with the facilities needed for the editing processes. The application made with Microsoft Visual C++ with DirectX technology, particularly DirectShow. The application provides basic facilities that will help the editing process of a digital video file. The application will produce an AVI format file after the editing process is finished. Through the testing process of this application shows the ability of this application to do the 'cut' and 'insert' of video files in AVI, MPEG, MPG and DAT formats. The 'cut' and 'insert' process only can be done in static order. Further, the aplication also provide the effects facility for transition process in each clip. Lastly, the process of saving the new edited video file in AVI format from the application. Abstract in Bahasa Indonesia : Perkembangan teknologi memberi kesempatan masyarakat untuk mengabadikan saat - saat yang penting menggunakan video. Pembentukan video digital yang baik membutuhkan proses editing yang baik pula. Untuk melakukan proses editing video digital dibutuhkan program editor. Berdasarkan permasalahan diatas maka pada penelitian ini dibuat prototipe editor sederhana untuk video digital. Pembuatan aplikasi memakai teknik pemrograman di bidang multimedia, khususnya video. Perencanaan dalam pembuatan aplikasi tersebut dimulai dengan pembentukan

  3. Editors' welcome, PORTAL, Vol 6, No 2, July 2009

    Directory of Open Access Journals (Sweden)

    Paul Allatson

    2010-01-01

    Full Text Available ‘Post-Mao, Post-Bourdieu: Class and Taste in Contemporary China,’ is a special issue of PORTAL Journal of Multidisciplinary International Studies guest-edited by Yi Zheng (University of Sydney and Stephanie Hemelryk Donald (RMIT University. The special issue explores the relationship between taste, choice and social stratification in contemporary China, and includes a new section, ‘New Perspectives Reports,’ which is intended to showcase opinion and ideas—in this case from the People’s Republic of China, in Mandarin—that complement the main articles. We hope to include this section in future issues of the journal. The guest editors and the PORTAL editorial committee would like to acknowledge that this special issue of is a result of a funding grant from the Australian Research Council, 2003-2005: ‘The Making of Middle-Class Taste: Reading, Tourism, and Educational Choices in Urban China.’ I am also delighted to announce that the PORTAL Editorial Committee has three new members, all from the Faculty of Arts and Social Sciences at the University of Technology, Sydney: Dr Malcolm Angelucci, Dr Beatriz Carrillo, and Dr Fredericka van der Lubbe. Paul Allatson, Editor, PORTAL Journal of Multidisciplinary International Studies.

  4. Role of editors and journals in detecting and preventing scientific misconduct: strengths, weaknesses, opportunities, and threats.

    Science.gov (United States)

    Marusic, Ana; Katavic, Vedran; Marusic, Matko

    2007-09-01

    Scientific journals have a central place in protecting research integrity because published articles are the most visible documentation of research. We used SWOT analysis to audit (S)trengths and (W)eaknesses as internal and (O)pportunities and (T)hreats as external factors affecting journals' responsibility in addressing research integrity issues. Strengths include editorial independence, authority and expertise, power to formulate editorial policies, and responsibility for the integrity of published records. Weaknesses stem from having no mandate for legal action, reluctance to get involved, and lack of training. Opportunities for editors are new technologies for detecting misconduct, policies by editorial organization or national institutions, and greater transparency of published research. Editors face threats from the lack of legal regulation and culture of research integrity in academic communities, lack of support from stakeholders in scientific publishing, and different pressures. Journal editors cannot be the policing force of the scientific community but they should actively ensure the integrity of the scientific record.

  5. Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi Method

    Science.gov (United States)

    Hazza Faizi Al-Hazza, Muataz; Ibrahim, Nur Asmawiyah bt; Adesta, Erry T. Y.; Khan, Ahsan Ali; Abdullah Sidek, Atiah Bt.

    2017-03-01

    One of the main challenges for any manufacturer is how to decrease the machining cost without affecting the final quality of the product. One of the new advanced machining processes in industry is the high speed hard end milling process that merges three advanced machining processes: high speed milling, hard milling and dry milling. However, one of the most important challenges in this process is to control the flank wear rate. Therefore a analyzing the flank wear rate during machining should be investigated in order to determine the best cutting levels that will not affect the final quality of the product. In this research Taguchi method has been used to investigate the effect of cutting speed, feed rate and depth of cut and determine the best level s to minimize the flank wear rate up to total length of 0.3mm based on the ISO standard to maintain the finishing requirements.

  6. Taguchi Method for Development of Mass Flow Rate Correlation using Hydrocarbon Refrigerant Mixture in Capillary Tube

    Directory of Open Access Journals (Sweden)

    Shodiya Sulaimon

    2014-07-01

    Full Text Available The capillary tube is an important control device used in small vapor compression refrigeration systems such as window air-conditioners, household refrigerators and freezers. This paper develops a non-dimensional correlation based on the test results of the adiabatic capillary tube for the mass flow rate through the tube using a hydrocarbon refrigerant mixture of 89.3% propane and 10.7% butane (HCM. The Taguchi method, a statistical experimental design approach, was employed. This approach explores the economic benefit that lies in studies of this nature, where only a small number of experiments are required and yet valid results are obtained. Considering the effects of the capillary tube geometry and the inlet condition of the tube, dimensionless parameters were chosen. The new correlation was also based on the Buckingham Pi theorem. This correlation predicts 86.67% of the present experimental data within a relative deviation of -10% to +10%. The predictions by this correlation were also compared with results in published literature.

  7. Selection of Near Optimal Laser Cutting Parameters in CO2 Laser Cutting by the Taguchi Method

    Directory of Open Access Journals (Sweden)

    Miloš MADIĆ

    2013-12-01

    Full Text Available Identification of laser cutting conditions that are insensitive to parameter variations and noise is of great importance. This paper demonstrates the application of Taguchi method for optimization of surface roughness in CO2 laser cutting of stainless steel. The laser cutting experiment was planned and conducted according to the Taguchi’s experimental design using the L27 orthogonal array. Four laser cutting parameters such as laser power, cutting speed, assist gas pressure, and focus position were considered in the experiment. Using the analysis of means and analysis of variance, the significant laser cutting parameters were identified, and subsequently the optimal combination of laser cutting parameter levels was determined. The results showed that the cutting speed is the most significant parameter affecting the surface roughness whereas the influence of the assist gas pressure can be neglected. It was observed, however, that interaction effects have predominant influence over the main effects on the surface roughness.

  8. Pandangan Editor Surat Kabar Indonesia Dan Malaysia Terhadap Jurnalisme Multikultural

    OpenAIRE

    Junaidi, Junaidi

    2010-01-01

    Both Indonesia and Malaysia are characterized as multicultural society. In multiculturalsociety mass media plays a singnifant role in keeping peaceful condition. Journalistic activitiesgreatly influences the coverage related to multicultural issues. Multicultural journalism is ajournalistic activity which consider multicultural society's interest in keeping peaceful condition.This article aims to know Indonesian dan Malaysian newspaper editors' views towardmulticultural coverage. The study of...

  9. From the editors: Finalizing a stage Editorial: Finalizando una etapa

    Directory of Open Access Journals (Sweden)

    Pep Simo

    2007-07-01

    Full Text Available This editorial briefly summarizes the work done by the editorial team of Intangible Capital in the last three years. We also inform the readers of Intagible Capital about the changes in the editorial position.En la presente editorial se sintetiza el trabajo de los últimos tres años y se presenta el relevo en el cargo de editor.

  10. An Approach to Maximize Weld Penetration During TIG Welding of P91 Steel Plates by Utilizing Image Processing and Taguchi Orthogonal Array

    Science.gov (United States)

    Singh, Akhilesh Kumar; Debnath, Tapas; Dey, Vidyut; Rai, Ram Naresh

    2017-10-01

    P-91 is modified 9Cr-1Mo steel. Fabricated structures and components of P-91 has a lot of application in power and chemical industry owing to its excellent properties like high temperature stress corrosion resistance, less susceptibility to thermal fatigue at high operating temperatures. The weld quality and surface finish of fabricated structure of P91 is very good when welded by Tungsten Inert Gas welding (TIG). However, the process has its limitation regarding weld penetration. The success of a welding process lies in fabricating with such a combination of parameters that gives maximum weld penetration and minimum weld width. To carry out an investigation on the effect of the autogenous TIG welding parameters on weld penetration and weld width, bead-on-plate welds were carried on P91 plates of thickness 6 mm in accordance to a Taguchi L9 design. Welding current, welding speed and gas flow rate were the three control variables in the investigation. After autogenous (TIG) welding, the dimension of the weld width, weld penetration and weld area were successfully measured by an image analysis technique developed for the study. The maximum error for the measured dimensions of the weld width, penetration and area with the developed image analysis technique was only 2 % compared to the measurements of Leica-Q-Win-V3 software installed in optical microscope. The measurements with the developed software, unlike the measurements under a microscope, required least human intervention. An Analysis of Variance (ANOVA) confirms the significance of the selected parameters. Thereafter, Taguchi's method was successfully used to trade-off between maximum penetration and minimum weld width while keeping the weld area at a minimum.

  11. The effects of an editor serving as one of the reviewers during the peer-review process.

    Science.gov (United States)

    Giordan, Marco; Csikasz-Nagy, Attila; Collings, Andrew M; Vaggi, Federico

    2016-01-01

    Background Publishing in scientific journals is one of the most important ways in which scientists disseminate research to their peers and to the wider public. Pre-publication peer review underpins this process, but peer review is subject to various criticisms and is under pressure from growth in the number of scientific publications. Methods Here we examine an element of the editorial process at eLife , in which the Reviewing Editor usually serves as one of the referees, to see what effect this has on decision times, decision type, and the number of citations. We analysed a dataset of 8,905 research submissions to eLife since June 2012, of which 2,747 were sent for peer review. This subset of 2747 papers was then analysed in detail.   Results The Reviewing Editor serving as one of the peer reviewers results in faster decision times on average, with the time to final decision ten days faster for accepted submissions (n=1,405) and five days faster for papers that were rejected after peer review (n=1,099). Moreover, editors acting as reviewers had no effect on whether submissions were accepted or rejected, and a very small (but significant) effect on citation rates. Conclusions An important aspect of eLife 's peer-review process is shown to be effective, given that decision times are faster when the Reviewing Editor serves as a reviewer. Other journals hoping to improve decision times could consider adopting a similar approach.

  12. Learning the Attachment Theory with the CM-ED Concept Map Editor

    Science.gov (United States)

    Rueda, U.; Arruarte, A.; Elorriaga, J. A.; Herran, E.

    2009-01-01

    This paper presents a study carried out at the University of the Basque Country UPV/EHU with the aim of evaluating the CM-ED (concept map editor) with social education students. Concept mapping is a widely accepted technique that promotes meaningful learning. Graphically representing concepts of the learning domain and relationships between them…

  13. A survey of the awareness, knowledge, policies and views of veterinary journal Editors-in-Chief on reporting guidelines for publication of research

    Science.gov (United States)

    2014-01-01

    Background Wider adoption of reporting guidelines by veterinary journals could improve the quality of published veterinary research. The aims of this study were to assess the knowledge and views of veterinary Editors-in-Chief on reporting guidelines, identify the policies of their journals, and determine their information needs. Editors-in-Chief of 185 journals on the contact list for the International Association of Veterinary Editors (IAVE) were surveyed in April 2012 using an online questionnaire which contained both closed and open questions. Results The response rate was 36.8% (68/185). Thirty-six of 68 editors (52.9%) stated they knew what a reporting guideline was before receiving the questionnaire. Editors said they had found out about reporting guidelines primarily through articles in other journals, via the Internet and through their own journal. Twenty of 57 respondents (35.1%) said their journal referred to reporting guidelines in its instructions to authors. CONSORT, REFLECT, and ARRIVE were the most frequently cited. Forty-four of 68 respondents (68.2%) believed that reporting guidelines should be adopted by all refereed veterinary journals. Qualitative analysis of the open questions revealed that lack of knowledge, fear, resistance to change, and difficulty in implementation were perceived as barriers to the adoption of reporting guidelines by journals. Editors suggested that reporting guidelines be promoted through communication and education of the veterinary community, with roles for the IAVE and universities. Many respondents believed a consensus policy on guideline implementation was needed for veterinary journals. Conclusions Further communication and education about reporting guidelines for editors, authors and reviewers has the potential to increase their adoption by veterinary journals in the future. PMID:24410882

  14. from editor

    Directory of Open Access Journals (Sweden)

    Ugur Demiray

    2007-07-01

    Full Text Available Greetings Dear Readers of TOJDE, First of all, please accept my excuse for the reason that the first time TOJDE is a few days delayed to reach its readers in its publication life. I am the most responsibility person for this delaying July 2007 issue of TOJDE is on your screen now again. This is a special issue on the theme on “Web 2.0 and Social Software in Distance Education”, as being Vol. 8, No. 3. Preparing of this special issue took nearly eight months, from the beginning to the arrival to your screen. A short story of this special issue is here if you are interested in. First idea and suggestion came from me to my dear colleagues, Dr. Mark J. W. LEE who is from Charles Sturt University, New South Wales, AUSTRALIA and Dr. Hakan G. SENEL from Turkey, who is Director at the Computer Research and Development Center (BAUM of Anadolu University. After, we agreed on the topic all together we started to announcing as a call for paper at many medium, institutions, governmental or non- governmental organizations, experts, and so on. The seven articles and one study (at “notes for Editor” section published in this special issue were written by twenty authors, from 7 different countries include Australia, Italy, The United Kingdom, Turkey and USA. In addition, two book reviews is also published. I would like to express my sincere thanks that goes to each of them, and valuable panelists for this special issue, in the name of my university and TOJDE. I strongly believe that experience gained on this special issue would encourage us and other interested colleagues in the field for the near future. Below you will find short biodata on my valuable guest editors. Mark J. W. LEE is an Adjunct Lecturer with the School of Education, Charles Sturt University, and an Honorary Research Fellow with the School of Information Technology and Mathematical Sciences, University of Ballarat. He was previously a Lecturer in Information Technology in the School of

  15. Application of Taguchi method to optimization of surface roughness during precise turning of NiTi shape memory alloy

    Science.gov (United States)

    Kowalczyk, M.

    2017-08-01

    This paper describes the research results of surface quality research after the NiTi shape memory alloy (Nitinol) precise turning by the tools with edges made of polycrystalline diamonds (PCD). Nitinol, a nearly equiatomic nickel-titanium shape memory alloy, has wide applications in the arms industry, military, medicine and aerospace industry, and industrial robots. Due to their specific properties NiTi alloys are known to be difficult-to-machine materials particularly by using conventional techniques. The research trials were conducted for three independent parameters (vc, f, ap) affecting the surface roughness were analyzed. The choice of parameter configurations were performed by factorial design methods using orthogonal plan type L9, with three control factors, changing on three levels, developed by G. Taguchi. S/N ratio and ANOVA analyses were performed to identify the best of cutting parameters influencing surface roughness.

  16. Process Parameters Optimization for Friction Stir Welding of Pure Aluminium to Brass (CuZn30 using Taguchi Technique

    Directory of Open Access Journals (Sweden)

    Elfar O. M. R.

    2016-01-01

    Full Text Available In this research, the friction stir welding of dissimilar commercial pure aluminium and brass (CuZn30 plates was investigated and the process parameters were optimized using Taguchi L9 orthogonal array. The considered process parameters were the rotational speed, traverse speed and pin offset. The optimum setting was determined with reference to ultimate tensile strength of the joint. The predicted optimum value of ultimate tensile strength was confirmed by experimental run using optimum parameters. Analysis of variance revealed that traverse speed is the most significant factor in controlling the joint tensile strength and pin offset also plays a significant role. In this investigation, the optimum tensile strength is 50% of aluminium base metal. Metallographic examination revealed that intermetallic compounds were formed in the interface of the optimum joint where the tensile failure was observed to take place.

  17. Experimental investigation of radiation effect on human thermal comfort by Taguchi method

    International Nuclear Information System (INIS)

    Arslanoglu, Nurullah; Yigit, Abdulvahap

    2016-01-01

    Highlights: • Radiation heat flux from lighting lamps on human thermal comfort is studied. • The effect of posture position on thermal comfort is investigated. • The effect of clothing color on thermal comfort is examined. • Radiation heat flux from halogen reflector lamp increase skin temperature more. • Posture position effect on thermal comfort is less than the other parameters. - Abstract: In this study, the effect of radiation heat flux of lighting lamps on human thermal comfort was investigated by using Taguchi method. In addition, at indoor conditions, clothing color and posture position under the radiation effect on thermal comfort were also investigated. For this purpose, experiments were performed in an air conditioned laboratory room in summer and autumn seasons. The amount of temperature rise on the back was considered as performance parameter. An L8 orthogonal array was selected as an experimental plan for the third parameters mentioned above for summer and autumn seasons. The results were analyzed for the optimum conditions using signal-to-noise (S/N) ratio and ANOVA method. The optimum results were found to be clear halogen lamp as lighting lamp, white as t-shirt color, standing as posture position, in summer season. The optimum levels of the lighting lamp, t-shirt color and posture position were found to be clear halogen lamp, white, sitting in autumn season, respectively.

  18. Wear Evaluation of AISI 4140 Alloy Steel with WC/C Lamellar Coatings Sliding Against EN 8 Using Taguchi Method

    Science.gov (United States)

    Kadam, Nikhil Rajendra; Karthikeyan, Ganesarethinam

    2016-10-01

    The purpose of the experiments in this paper is to use the Taguchi methods to investigate the wear of WC/C coated nitrided AISI 4140 alloy steel. A study of lamellar WC/C coating which were deposited by a physical vapor deposition on nitrided AISI 4140 alloy steel. The investigation includes wear evaluation using Pin-on-disk configuration. When WC/C coated AISI 4140 alloy steel slides against EN 8 steel, it was found that carbon-rich coatings show much lower wear of the countersurface than nitrogen-rich coatings. The results were correlated with the properties determined from tribological and mechanical characterization, therefore by probably selecting the proper processing parameters the deposition of WC/C coating results in decreasing the wear rate of the substrate which shows a potential for tribological application.

  19. Mentoring for text editors: Fit for purpose in the era of freelancing ...

    African Journals Online (AJOL)

    Kate H

    distinguishing between mentoring, coaching, counselling, teaching and training as ... Group (now Guild), Society for Editors and Proofreaders), a number of .... In essence, Bandura (1982) and others have found that an individual's ..... significant difference in the quality of learning or overall satisfaction when people engage.

  20. Costing improvement of remanufacturing crankshaft by integrating Mahalanobis-Taguchi System and Activity based Costing

    Science.gov (United States)

    Abu, M. Y.; Nor, E. E. Mohd; Rahman, M. S. Abd

    2018-04-01

    Integration between quality and costing system is very crucial in order to achieve an accurate product cost and profit. Current practice by most of remanufacturers, there are still lacking on optimization during the remanufacturing process which contributed to incorrect variables consideration to the costing system. Meanwhile, traditional costing accounting being practice has distortion in the cost unit which lead to inaccurate cost of product. The aim of this work is to identify the critical and non-critical variables during remanufacturing process using Mahalanobis-Taguchi System and simultaneously estimate the cost using Activity Based Costing method. The orthogonal array was applied to indicate the contribution of variables in the factorial effect graph and the critical variables were considered with overhead costs that are actually demanding the activities. This work improved the quality inspection together with costing system to produce an accurate profitability information. As a result, the cost per unit of remanufactured crankshaft of MAN engine model with 5 critical crankpins is MYR609.50 while Detroit engine model with 4 critical crankpins is MYR1254.80. The significant of output demonstrated through promoting green by reducing re-melting process of damaged parts to ensure consistent benefit of return cores.

  1. Multistate Model Builder (MSMB): a flexible editor for compact biochemical models.

    Science.gov (United States)

    Palmisano, Alida; Hoops, Stefan; Watson, Layne T; Jones, Thomas C; Tyson, John J; Shaffer, Clifford A

    2014-04-04

    Building models of molecular regulatory networks is challenging not just because of the intrinsic difficulty of describing complex biological processes. Writing a model is a creative effort that calls for more flexibility and interactive support than offered by many of today's biochemical model editors. Our model editor MSMB - Multistate Model Builder - supports multistate models created using different modeling styles. MSMB provides two separate advances on existing network model editors. (1) A simple but powerful syntax is used to describe multistate species. This reduces the number of reactions needed to represent certain molecular systems, thereby reducing the complexity of model creation. (2) Extensive feedback is given during all stages of the model creation process on the existing state of the model. Users may activate error notifications of varying stringency on the fly, and use these messages as a guide toward a consistent, syntactically correct model. MSMB default values and behavior during model manipulation (e.g., when renaming or deleting an element) can be adapted to suit the modeler, thus supporting creativity rather than interfering with it. MSMB's internal model representation allows saving a model with errors and inconsistencies (e.g., an undefined function argument; a syntactically malformed reaction). A consistent model can be exported to SBML or COPASI formats. We show the effectiveness of MSMB's multistate syntax through models of the cell cycle and mRNA transcription. Using multistate reactions reduces the number of reactions need to encode many biochemical network models. This reduces the cognitive load for a given model, thereby making it easier for modelers to build more complex models. The many interactive editing support features provided by MSMB make it easier for modelers to create syntactically valid models, thus speeding model creation. Complete information and the installation package can be found at http

  2. 2012 Special NSREC Issue of the IEEE Transactions on Nuclear Science Comments by the Editors

    Science.gov (United States)

    Schwank, Jim; Brown, Dennis; Girard, Sylvain; Gouker, Pascale; Gerardin, Simone; Quinn, Heather; Barnaby, Hugh

    2012-12-01

    The December 2012 special issue of the IEEE Transactions on Nuclear Science contains selected papers from the 49th annual IEEE International Nuclear and Space Radiation Effects Conference (NSREC) held July 16-20, 2012, in Miami, Florida USA. 95 papers presented at the 2012 NSREC were submitted for consideration for this year’s special issue. Those papers that appear in this special issue were able to successfully complete the review process before the deadline for the December issue. A few additional papers may appear in subsequent issues of the TRANSACTIONS. This publication is the premier archival journal for research on space and nuclear radiation effects in materials, devices, circuits, and systems. This distinction is the direct result of the conscientious efforts of both the authors, who present and document their work, and the reviewers, who selflessly volunteer their time and talent to help review the manuscripts. Each paper in this journal has been reviewed by experts selected by the editors for their expertise and knowledge of the particular subject areas. The peer review process for a typical technical journal generally takes six months to one year to complete. To publish this special issue of the IEEE Transactions on Nuclear Science (in December), the review process, from initial submission to final form, must be completed in about 10 weeks. Because of the short schedule, both the authors and reviewers are required to respond very quickly. The reviewers listed on the following pages contributed vitally to this quick-turn review process.We would like to express our sincere appreciation to each of them for accepting this difficult, but critical role in the process. To provide consistent reviews of papers throughout the year, the IEEE Transactions on Nuclear Science relies on a year-round editorial board that manages reviews for submissions throughout the year to the TRANSACTIONS in the area of radiation effects. The review process is managed by a Senior

  3. Apresentação sobre boas práticas editoriais para os editores científicos - UNINOVE

    OpenAIRE

    Silva, Altieres de Oliveira; Maccari, Emerson

    2015-01-01

    Com base nas discussões que foram apresentadas no Curso de Editoração Cientifica da Associação Brasileira de Editores Cientificos - ABEC, esta apresentação teve como objetivo orientar/ajudar os editores cientificos dos periódicos em Administração -UNINOVE. Contemplando os seguintes aspectos: gestão editorial; indexação; diretrizes para os autores; fator de impacto; redes sociais para alavancar a visibidade dos periódicos e artigos.

  4. VIP : A Visual Editor and Compiler for v-Promela

    OpenAIRE

    Kamel, Moataz; Leue, Stefan

    2001-01-01

    We describe the Visual Interface to Promela (VIP) tool that we have recently implemented. VIP supports the visual editing and maintenance of v-Promela models. v-Promela is a visual, object-oriented extension to Promela, the input language to the Spin model checker. We introduce the v-Promela notation as supported by the VIP editor, discuss Promela code generation, and describe the process of property validation for the resulting models. Our discussion centers around two case studies, a call p...

  5. Artificial intelligence in peer review: How can evolutionary computation support journal editors?

    Science.gov (United States)

    Mrowinski, Maciej J; Fronczak, Piotr; Fronczak, Agata; Ausloos, Marcel; Nedic, Olgica

    2017-01-01

    With the volume of manuscripts submitted for publication growing every year, the deficiencies of peer review (e.g. long review times) are becoming more apparent. Editorial strategies, sets of guidelines designed to speed up the process and reduce editors' workloads, are treated as trade secrets by publishing houses and are not shared publicly. To improve the effectiveness of their strategies, editors in small publishing groups are faced with undertaking an iterative trial-and-error approach. We show that Cartesian Genetic Programming, a nature-inspired evolutionary algorithm, can dramatically improve editorial strategies. The artificially evolved strategy reduced the duration of the peer review process by 30%, without increasing the pool of reviewers (in comparison to a typical human-developed strategy). Evolutionary computation has typically been used in technological processes or biological ecosystems. Our results demonstrate that genetic programs can improve real-world social systems that are usually much harder to understand and control than physical systems.

  6. Artificial intelligence in peer review: How can evolutionary computation support journal editors?

    Directory of Open Access Journals (Sweden)

    Maciej J Mrowinski

    Full Text Available With the volume of manuscripts submitted for publication growing every year, the deficiencies of peer review (e.g. long review times are becoming more apparent. Editorial strategies, sets of guidelines designed to speed up the process and reduce editors' workloads, are treated as trade secrets by publishing houses and are not shared publicly. To improve the effectiveness of their strategies, editors in small publishing groups are faced with undertaking an iterative trial-and-error approach. We show that Cartesian Genetic Programming, a nature-inspired evolutionary algorithm, can dramatically improve editorial strategies. The artificially evolved strategy reduced the duration of the peer review process by 30%, without increasing the pool of reviewers (in comparison to a typical human-developed strategy. Evolutionary computation has typically been used in technological processes or biological ecosystems. Our results demonstrate that genetic programs can improve real-world social systems that are usually much harder to understand and control than physical systems.

  7. Editor's intervention in the register of compounds in archaic Portuguese texts: some reflections on the use of hyphen

    Directory of Open Access Journals (Sweden)

    Antonia Vieira dos Santos

    2014-07-01

    Full Text Available The use of hyphen within compounds was not built up before the nineteenth century. Thus, compounds spelled with hyphen in archaic Portuguese texts are a result of editing criteria adopted by editors. From this type of intervention, the relationship between hyphen use – result of a spelling convention – and the definition of compound adopted by the editor are discussed. Its absence is significant to the history of the language.

  8. P.R. Subramanian (Chief Editor). Kriyavin Tarkalat Tamil Akarati (Tamil-Tamil-Ankilam) (Dictionary of Contemporary Tamil (Tamil-Tamil-English))

    OpenAIRE

    G. Murugan

    2012-01-01

    Review of P.R. Subramanian (Chief Editor). Kriyavin Tarkalat Tamil Akarati (Tamil-Tamil-Ankilam) (Dictionary of Contemporary Tamil (Tamil-Tamil-English))Resensie van P.R. Subramanian (Chief Editor). Kriyavin Tarkalat Tamil Akarati (Tamil-Tamil-Ankilam) (Dictionary of Contemporary Tamil (Tamil-Tamil-English))

  9. Optimization on Turning Parameters of 15-5PH Stainless Steel Using Taguchi Based Grey Approach and Topsis

    Directory of Open Access Journals (Sweden)

    Palanisamy D.

    2016-09-01

    Full Text Available The machinability and the process parameter optimization of turning operation for 15-5 Precipitation Hardening (PH stainless steel have been investigated based on the Taguchi based grey approach and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS. An L27 orthogonal array was selected for planning the experiment. Cutting speed, depth of cut and feed rate were considered as input process parameters. Cutting force (Fz and surface roughness (Ra were considered as the performance measures. These performance measures were optimized for the improvement of machinability quality of product. A comparison is made between the multi-criteria decision making tools. Grey Relational Analysis (GRA and TOPSIS are used to confirm and prove the similarity. To determine the influence of process parameters, Analysis of Variance (ANOVA is employed. The end results of experimental investigation proved that the machining performance can be enhanced effectively with the assistance of the proposed approaches.

  10. Mentoring for text editors: Fit for purpose in the era of freelancing ...

    African Journals Online (AJOL)

    In this article, the supportive role that mentoring relationships currently do and should play in the development and careers of text editors is described against the background of the particular circumstances of these service providers in a sector experiencing great organisational and technological changes. This is a group ...

  11. Implementación de un editor gráfico de circuitos eléctricos con Qt

    OpenAIRE

    Martínez Muñoz, León Alberto

    2011-01-01

    Desarrollo de un Editor de Esquemas Eléctricos bajo el lenguaje de programación Qt que permite diseñar circuitos eléctricos para su posterior interpretación con un simulador de redes PLC. El Editor de Esquemas Eléctricos permita dibujar sobre un área de diseño un esquema eléctrico. El usuario dispone de cualquier componente eléctrico que pueda ser encontrado en una vivienda. Permite modificar los parámetros de cada componente utilizando los diferentes menús que ofrece la aplicación y expor...

  12. EDITORIAL: Incoming Editor-in-Chief

    Science.gov (United States)

    Webb, Steve

    2006-01-01

    Physics in Medicine and Biology (PMB) is a journal that originated in the UK but is now rightly regarded as one of the pre-eminent international journals for the publication of material coming within its remit. It is 50 years old and its maturity is an outcome of the consistent support of high performing authors, a supportive and professional publishing house, dedicated referees, many vigorous and conscientious editorial boards and the collective input of the 10 previous Editors as listed in his incoming editorial (January 2000 issue) by the retiring Editor, Professor Alun Beddoe. The scientific climate and it associated publication modus operandi in the 1950s was very different from that at the current time and the journal has evolved to reflect this. Hence today the scope of content is somewhat broader, the size of the journal is vastly greater, the whole publication process is slicker and more efficient and a paper in PMB is highly prized by its authors and those who look to quality factors and impact. The quality of the journal still relies on the voluntary labour and expertise of its busy international referees and Board members. For many years I have tried to place my own research material in PMB and encourage my teams to do likewise, not only acknowledging the prestige of the journal but also because of the extraordinarily fast turnaround time of all the processes without any loss of quality. This serves us very well and the publishing team are to be congratulated. Some things seem to change more slowly or not at all, however. The prediction, when I started my research career, that books and journals would be dinosaurs by now has manifestly not come true and, whilst most of us are addicted (and why not?) to the electronic ways of doing things that can be done by more traditional ways, PMB and a packet of reprints from time to time arriving by post still has a reassuring feel despite the fact that the papers have been `on-line' for a while before. An incoming

  13. An editor for the generation and customization of geometry restraints.

    Science.gov (United States)

    Moriarty, Nigel W; Draizen, Eli J; Adams, Paul D

    2017-02-01

    Chemical restraints for use in macromolecular structure refinement are produced by a variety of methods, including a number of programs that use chemical information to generate the required bond, angle, dihedral, chiral and planar restraints. These programs help to automate the process and therefore minimize the errors that could otherwise occur if it were performed manually. Furthermore, restraint-dictionary generation programs can incorporate chemical and other prior knowledge to provide reasonable choices of types and values. However, the use of restraints to define the geometry of a molecule is an approximation introduced with efficiency in mind. The representation of a bond as a parabolic function is a convenience and does not reflect the true variability in even the simplest of molecules. Another complicating factor is the interplay of the molecule with other parts of the macromolecular model. Finally, difficult situations arise from molecules with rare or unusual moieties that may not have their conformational space fully explored. These factors give rise to the need for an interactive editor for WYSIWYG interactions with the restraints and molecule. Restraints Editor, Especially Ligands (REEL) is a graphical user interface for simple and error-free editing along with additional features to provide greater control of the restraint dictionaries in macromolecular refinement.

  14. From Editor

    Directory of Open Access Journals (Sweden)

    Ugur Demiray

    2012-04-01

    Full Text Available Dear TOJDE Readers,Welcome to the Volume 13 Number: 2 of TOJDE! In this issue, 7 notes for Editor and 22 articles one book review of 57 authors from 12 different countries have been published. These published articles are from, Barbados, Ethiopia, India, Indonesia, Iran, Nigeria, Pakistan, Russia, Saudi Arabia, Turkey, USA and Zimbabwe.In general, around 13 articles and 4 notes for editors have been published in TOJDE so far. I would like to explain, why this time 22 articles and 8 submissions published in the articles and in notes for Editor Section respectively. First all, you should know that if a submission picks up from 3 TOJDE editors between 4.5 and 9 over all 9 credits, it means that this submission can be published in TOJDE in the coming issue. However, since the publishing priority of the accepted papers belongs to the highest scored ones, submissions which receive a score between 4.5 and 5 or 6 may wait and be archived for publishing later on. TOJDE administration respected this publishing rule up to now. Therefore, some accepted submissions which obtained over 4.5 have not been published up to now. These submissions were waiting for publishing in TOJDE in the future. In this issue, we decided to give them a chance to be published. For this reason, the current issue includes more papers than the previous issues. The 1st Notes for editor arrived from Russia written by Galina ARTYUSHINA and Olga SHEYPAK on Impacting Motivation In The Virtual Classroom. They mentioned that teachers, educational managers and learners must realize that new opportunities are offered by modern on-line communication. A person with basic Internet and Web skills is open to a new world of knowledge, from free Web surfing and self-organized education - through on-line resources and familiarization with Internet culture, its places, sites, search engines etc. - up to a more structured approach. The 2nd notes for editor is titled as “Use Of Libraries In Open And

  15. THE NEW ONLINE METADATA EDITOR FOR GENERATING STRUCTURED METADATA

    Energy Technology Data Exchange (ETDEWEB)

    Devarakonda, Ranjeet [ORNL; Shrestha, Biva [ORNL; Palanisamy, Giri [ORNL; Hook, Leslie A [ORNL; Killeffer, Terri S [ORNL; Boden, Thomas A [ORNL; Cook, Robert B [ORNL; Zolly, Lisa [United States Geological Service (USGS); Hutchison, Viv [United States Geological Service (USGS); Frame, Mike [United States Geological Service (USGS); Cialella, Alice [Brookhaven National Laboratory (BNL); Lazer, Kathy [Brookhaven National Laboratory (BNL)

    2014-01-01

    Nobody is better suited to describe data than the scientist who created it. This description about a data is called Metadata. In general terms, Metadata represents the who, what, when, where, why and how of the dataset [1]. eXtensible Markup Language (XML) is the preferred output format for metadata, as it makes it portable and, more importantly, suitable for system discoverability. The newly developed ORNL Metadata Editor (OME) is a Web-based tool that allows users to create and maintain XML files containing key information, or metadata, about the research. Metadata include information about the specific projects, parameters, time periods, and locations associated with the data. Such information helps put the research findings in context. In addition, the metadata produced using OME will allow other researchers to find these data via Metadata clearinghouses like Mercury [2][4]. OME is part of ORNL s Mercury software fleet [2][3]. It was jointly developed to support projects funded by the United States Geological Survey (USGS), U.S. Department of Energy (DOE), National Aeronautics and Space Administration (NASA) and National Oceanic and Atmospheric Administration (NOAA). OME s architecture provides a customizable interface to support project-specific requirements. Using this new architecture, the ORNL team developed OME instances for USGS s Core Science Analytics, Synthesis, and Libraries (CSAS&L), DOE s Next Generation Ecosystem Experiments (NGEE) and Atmospheric Radiation Measurement (ARM) Program, and the international Surface Ocean Carbon Dioxide ATlas (SOCAT). Researchers simply use the ORNL Metadata Editor to enter relevant metadata into a Web-based form. From the information on the form, the Metadata Editor can create an XML file on the server that the editor is installed or to the user s personal computer. Researchers can also use the ORNL Metadata Editor to modify existing XML metadata files. As an example, an NGEE Arctic scientist use OME to register

  16. Life and times of the impact factor: retrospective analysis of trends for seven medical journals (1994-2005) and their Editors' views

    Science.gov (United States)

    Chew, Mabel; Villanueva, Elmer V; Van Der Weyden, Martin B

    2007-01-01

    Objective (1) To analyse trends in the journal impact factor (IF) of seven general medical journals (Ann Intern Med, BMJ, CMAJ, JAMA, Lancet, Med J Aust and N Engl J Med) over 12 years; and (2) to ascertain the views of these journals' past and present Editors on factors that had affected their journals' IFs during their tenure, including direct editorial policies. Design Retrospective analysis of IF data from ISI Web of Knowledge Journal Citation Reports—Science Edition, 1994 to 2005, and interviews with Editors-in-Chief. Setting Medical journal publishing. Participants Ten Editors-in-Chief of the journals, except Med J Aust, who served between 1999 and 2004. Main outcome measures IFs and component numerator and denominator data for the seven general medical journals (1994 to 2005) were collected. IFs are calculated using the formula: (Citations in year z to articles published in years x and y)/(Number of citable articles published in years x and y), where z is the current year and x and y are the previous two years. Editors' views on factors that had affected their journals' IFs were also obtained. Results IFs generally rose over the 12-year period, with the N Engl J Med having the highest IF throughout. However, percentage rises in IF relative to the baseline year of 1994 were greatest for CMAJ (about 500%) and JAMA (260%). Numerators for most journals tended to rise over this period, while denominators tended to be stable or to fall, although not always in a linear fashion. Nine of ten eligible editors were interviewed. Possible reasons given for rises in citation counts included: active recruitment of high-impact articles by courting researchers; offering authors better services; boosting the journal's media profile; more careful article selection; and increases in article citations. Most felt that going online had not affected citations. Most had no deliberate policy to publish fewer articles (lowering the IF denominator), which was sometimes the unintended

  17. Life and times of the impact factor: retrospective analysis of trends for seven medical journals (1994-2005) and their Editors' views.

    Science.gov (United States)

    Chew, Mabel; Villanueva, Elmer V; Van Der Weyden, Martin B

    2007-03-01

    (1) To analyse trends in the journal impact factor (IF) of seven general medical journals (Ann Intern Med, BMJ, CMAJ, JAMA, Lancet, Med J Aust and N Engl J Med) over 12 years; and (2) to ascertain the views of these journals' past and present Editors on factors that had affected their journals' IFs during their tenure, including direct editorial policies. Retrospective analysis of IF data from ISI Web of Knowledge Journal Citation Reports-Science Edition, 1994 to 2005, and interviews with Editors-in-Chief. Medical journal publishing. Ten Editors-in-Chief of the journals, except Med J Aust, who served between 1999 and 2004. MAIN OUTCOME MEASURES IFs and component numerator and denominator data for the seven general medical journals (1994 to 2005) were collected. IFs are calculated using the formula: (Citations in year z to articles published in years x and y)/(Number of citable articles published in years x and y), where z is the current year and x and y are the previous two years. Editors' views on factors that had affected their journals' IFs were also obtained. IFs generally rose over the 12-year period, with the N Engl J Med having the highest IF throughout. However, percentage rises in IF relative to the baseline year of 1994 were greatest for CMAJ (about 500%) and JAMA (260%). Numerators for most journals tended to rise over this period, while denominators tended to be stable or to fall, although not always in a linear fashion. Nine of ten eligible editors were interviewed. Possible reasons given for rises in citation counts included: active recruitment of high-impact articles by courting researchers; offering authors better services; boosting the journal's media profile; more careful article selection; and increases in article citations. Most felt that going online had not affected citations. Most had no deliberate policy to publish fewer articles (lowering the IF denominator), which was sometimes the unintended result of other editorial policies. The two

  18. Laccase production by Coriolopsis caperata RCK2011: Optimization under solid state fermentation by Taguchi DOE methodology

    Science.gov (United States)

    Nandal, Preeti; Ravella, Sreenivas Rao; Kuhad, Ramesh Chander

    2013-01-01

    Laccase production by Coriolopsis caperata RCK2011 under solid state fermentation was optimized following Taguchi design of experiment. An orthogonal array layout of L18 (21 × 37) was constructed using Qualitek-4 software with eight most influensive factors on laccase production. At individual level pH contributed higher influence, whereas, corn steep liquor (CSL) accounted for more than 50% of the severity index with biotin and KH2PO4 at the interactive level. The optimum conditions derived were; temperature 30°C, pH 5.0, wheat bran 5.0 g, inoculum size 0.5 ml (fungal cell mass = 0.015 g dry wt.), biotin 0.5% w/v, KH2PO4 0.013% w/v, CSL 0.1% v/v and 0.5 mM xylidine as an inducer. The validation experiments using optimized conditions confirmed an improvement in enzyme production by 58.01%. The laccase production to the level of 1623.55 Ugds−1 indicates that the fungus C. caperata RCK2011 has the commercial potential for laccase. PMID:23463372

  19. Publication Criteria and Recommended Areas of Improvement within School Psychology Journals as Reported by Editors, Journal Board Members, and Manuscript Authors

    Science.gov (United States)

    Albers, Craig A.; Floyd, Randy G.; Fuhrmann, Melanie J.; Martinez, Rebecca S.

    2011-01-01

    Two online surveys were completed by editors, associate editors, editorial board members, and members or fellows of the Division 16 of the American Psychological Association. These surveys targeted (a) the criteria for a manuscript to be published in school psychology journals, and (b) the components of the peer-review process that should be…

  20. Integration of Mahalanobis-Taguchi system and traditional cost accounting for remanufacturing crankshaft

    Science.gov (United States)

    Abu, M. Y.; Norizan, N. S.; Rahman, M. S. Abd

    2018-04-01

    Remanufacturing is a sustainability strategic planning which transforming the end of life product to as new performance with their warranty is same or better than the original product. In order to quantify the advantages of this strategy, all the processes must implement the optimization to reach the ultimate goal and reduce the waste generated. The aim of this work is to evaluate the criticality of parameters on the end of life crankshaft based on Taguchi’s orthogonal array. Then, estimate the cost using traditional cost accounting by considering the critical parameters. By implementing the optimization, the remanufacturer obviously produced lower cost and waste during production with higher potential to gain the profit. Mahalanobis-Taguchi System was proven as a powerful method of optimization that revealed the criticality of parameters. When subjected the method to the MAN engine model, there was 5 out of 6 crankpins were critical which need for grinding process while no changes happened to the Caterpillar engine model. Meanwhile, the cost per unit for MAN engine model was changed from MYR1401.29 to RM1251.29 while for Caterpillar engine model have no changes due to the no changes on criticality of parameters consideration. Therefore, by integrating the optimization and costing through remanufacturing process, a better decision can be achieved after observing the potential profit will be gained. The significant of output demonstrated through promoting sustainability by reducing re-melting process of damaged parts to ensure consistent benefit of return cores.

  1. Locking Editor A Utility For Protecting Software Exercises In The Computer Laboratory Of AMA University

    Directory of Open Access Journals (Sweden)

    Paul M. Grafilon

    2017-07-01

    Full Text Available The student of AMA University persistence in computing which has the keys to providing their talent needed to fill the computer laboratory in the computing professions. A range of factors can affect a students decision to remain in a computing major or change to another major if ever they feel that computing education is difficult. This has to describe the activities in computer laboratory specifically exercises machine problems and computing case studies interacting different application programs as the basis of their skills and knowledge in programming capability. The nature of those activities addresses by using of IDE as open source in all programming applications which may result of specific intervention such as using the editor to create a source file the code blocks comments and program statements are entered and the file saved. In case there are no corrective actions taken as the editor does not know this is supposed to be a source file as opposed to notes for class. If working in a position-dependent language like Java the developer would have to be very careful about indenting. The file has to be saved with the correct file extension and in a directory where the compiler can find it. Each source file has to be compiled separately if the program has a few source files they all have to be named separately in the compiler. When invoking the compiler it has to be directed to look in the correct directory for the source files and where the output files should be stored. If there is an error in the source file the compiler will output messages and fail to complete. For any errors the developer goes back and edits the source file working from line numbers and compiler messages to fix the problems and these steps continue until all the source files compile without errors. When linking each object file is specified as being part of the build. Again the locations for the object files and executable are given. There may be errors at this point

  2. Associate Professor Jan Brandts, editor-in-chief of Applications of Mathematics, is fifty

    Czech Academy of Sciences Publication Activity Database

    Křížek, Michal

    2018-01-01

    Roč. 63, č. 1 (2018), s. 1-5 ISSN 0862-7940 Institutional support: RVO:67985840 Keywords : editor-in-chief Subject RIV: BA - General Mathematics Impact factor: 0.618, year: 2016 http:// articles .math.cas.cz/10.21136/AM.2018.0326-17/?type=F

  3. Associate Professor Jan Brandts, editor-in-chief of Applications of Mathematics, is fifty

    Czech Academy of Sciences Publication Activity Database

    Křížek, Michal

    2018-01-01

    Roč. 63, č. 1 (2018), s. 1-5 ISSN 0862-7940 Institutional support: RVO:67985840 Keywords : editor-in-chief Subject RIV: BA - General Mathematics Impact factor: 0.618, year: 2016 http://articles.math.cas.cz/10.21136/AM.2018.0326-17/?type=F

  4. Biosorption of malachite green from aqueous solutions by Pleurotus ostreatus using Taguchi method

    Science.gov (United States)

    2014-01-01

    Dyes released into the environment have been posing a serious threat to natural ecosystems and aquatic life due to presence of heat, light, chemical and other exposures stable. In this study, the Pleurotus ostreatus (a macro-fungus) was used as a new biosorbent to study the biosorption of hazardous malachite green (MG) from aqueous solutions. The effective disposal of P. ostreatus is a meaningful work for environmental protection and maximum utilization of agricultural residues. The operational parameters such as biosorbent dose, pH, and ionic strength were investigated in a series of batch studies at 25°C. Freundlich isotherm model was described well for the biosorption equilibrium data. The biosorption process followed the pseudo-second-order kinetic model. Taguchi method was used to simplify the experimental number for determining the significance of factors and the optimum levels of experimental factors for MG biosorption. Biosorbent dose and initial MG concentration had significant influences on the percent removal and biosorption capacity. The highest percent removal reached 89.58% and the largest biosorption capacity reached 32.33 mg/g. The Fourier transform infrared spectroscopy (FTIR) showed that the functional groups such as, carboxyl, hydroxyl, amino and phosphonate groups on the biosorbent surface could be the potential adsorption sites for MG biosorption. P. ostreatus can be considered as an alternative biosorbent for the removal of dyes from aqueous solutions. PMID:24620852

  5. A Taguchi approach on optimal process control parameters for HDPE pipe extrusion process

    Science.gov (United States)

    Sharma, G. V. S. S.; Rao, R. Umamaheswara; Rao, P. Srinivasa

    2017-06-01

    High-density polyethylene (HDPE) pipes find versatile applicability for transportation of water, sewage and slurry from one place to another. Hence, these pipes undergo tremendous pressure by the fluid carried. The present work entails the optimization of the withstanding pressure of the HDPE pipes using Taguchi technique. The traditional heuristic methodology stresses on a trial and error approach and relies heavily upon the accumulated experience of the process engineers for determining the optimal process control parameters. This results in setting up of less-than-optimal values. Hence, there arouse a necessity to determine optimal process control parameters for the pipe extrusion process, which can ensure robust pipe quality and process reliability. In the proposed optimization strategy, the design of experiments (DoE) are conducted wherein different control parameter combinations are analyzed by considering multiple setting levels of each control parameter. The concept of signal-to-noise ratio ( S/ N ratio) is applied and ultimately optimum values of process control parameters are obtained as: pushing zone temperature of 166 °C, Dimmer speed at 08 rpm, and Die head temperature to be 192 °C. Confirmation experimental run is also conducted to verify the analysis and research result and values proved to be in synchronization with the main experimental findings and the withstanding pressure showed a significant improvement from 0.60 to 1.004 Mpa.

  6. New Editor-in-Chief for Journal of Physics A: Mathematical and Theoretical

    Science.gov (United States)

    Gillan, Rebecca

    2014-04-01

    We are delighted to announce that Professor Martin Evans of University of Edinburgh has been appointed as the new Editor-in-Chief of Journal of Physics A: Mathematical and Theoretical. Martin Evans has been Editor of the Statistical Physics section of the journal since 2009. Prior to this, he served as a Board Member for the journal. His areas of research include statistical mechanics of nonequilibrium systems, phase transitions and scaling regimes in nonequilibrium statistical physics, glassy dynamics, phase transitions and ordering in driven diffusive systems, mass transport models, condensation models, zero range processes and exclusion processes. We very much look forward to working with Martin to continue to improve the journal's quality and interest to the readership. We would like to thank our outgoing Editor-in-Chief, Professor Murray Batchelor. Murray has worked hard and provided excellent guidance in improving the quality of the journal and the service that the journal provides to authors, referees and readers. During the last five years, we have raised the quality threshold for acceptance in the journal and currently reject over 70% of submissions. As a result, papers published in Journal of Physics A: Mathematical and Theoretical are amongst the best in the field. We have also maintained and improved on our excellent receipt-to-first-decision times, which now average under 40 days for papers. With the help of Martin Evans and our distinguished Editorial Board, we will be working to further improve the quality of the journal whilst continuing to offer excellent services to our readers, authors and referees. We hope that you benefit from reading the journal. If you have any comments or questions, please do not hesitate to contact us at jphysa@iop.org. Rebecca Gillan Publisher

  7. Meeting the Editors at the 9th Iberoamerican Academy of Management Conference

    Directory of Open Access Journals (Sweden)

    Fernando Antonio Ribeiro Serra

    2016-06-01

    Full Text Available The following Editorial Comment presents a summary of the main ideas and suggestions presented at the “Meeting with the Editors” at the 9th Iberoamerican Academy of Management (IAM Conference, in Santiago (Chile. The meeting was conducted by three editors: Jonathan Doh from the Journal of World Business, Martin Larraza from Management Research and Herman Aguinis, President of the Iberoamerican Academy of Management and former editor of Organizational Research Methods. The conference took place from 3rd to 5th December 2015, and was hosted by Universidad Del Desarrollo. This editorial does not change the focus of the previous recent editorial comments of the Iberoamerican Journal of Strategic Management (IJSM. Its purpose of helping researchers and students in their quest to conduct quality research and publish it remains unchanged. These specific editorial comments are grouped in the menu section of the IJSM website under the title How to publish (or perish? (available at http://www.revistaiberoamericana.org/ojs/index.php/ibero/pages/view/publish%20or%20perish.

  8. Adequacy of authors' replies to criticism raised in electronic letters to the editor: cohort study

    DEFF Research Database (Denmark)

    Gøtzsche, Peter C; Delamothe, Tony; Godlee, Fiona

    2010-01-01

    To investigate whether substantive criticism in electronic letters to the editor, defined as a problem that could invalidate the research or reduce its reliability, is adequately addressed by the authors....

  9. Semi-automated XML markup of biosystematic legacy literature with the GoldenGATE editor.

    Science.gov (United States)

    Sautter, Guido; Böhm, Klemens; Agosti, Donat

    2007-01-01

    Today, digitization of legacy literature is a big issue. This also applies to the domain of biosystematics, where this process has just started. Digitized biosystematics literature requires a very precise and fine grained markup in order to be useful for detailed search, data linkage and mining. However, manual markup on sentence level and below is cumbersome and time consuming. In this paper, we present and evaluate the GoldenGATE editor, which is designed for the special needs of marking up OCR output with XML. It is built in order to support the user in this process as far as possible: Its functionality ranges from easy, intuitive tagging through markup conversion to dynamic binding of configurable plug-ins provided by third parties. Our evaluation shows that marking up an OCR document using GoldenGATE is three to four times faster than with an off-the-shelf XML editor like XML-Spy. Using domain-specific NLP-based plug-ins, these numbers are even higher.

  10. Optimization of critical factors to enhance polyhydroxyalkanoates (PHA) synthesis by mixed culture using Taguchi design of experimental methodology.

    Science.gov (United States)

    Venkata Mohan, S; Venkateswar Reddy, M

    2013-01-01

    Optimizing different factors is crucial for enhancement of mixed culture bioplastics (polyhydroxyalkanoates (PHA)) production. Design of experimental (DOE) methodology using Taguchi orthogonal array (OA) was applied to evaluate the influence and specific function of eight important factors (iron, glucose concentration, VFA concentration, VFA composition, nitrogen concentration, phosphorous concentration, pH, and microenvironment) on the bioplastics production. Three levels of factor (2(1) × 3(7)) variation were considered with symbolic arrays of experimental matrix [L(18)-18 experimental trails]. All the factors were assigned with three levels except iron concentration (2(1)). Among all the factors, microenvironment influenced bioplastics production substantially (contributing 81%), followed by pH (11%) and glucose concentration (2.5%). Validation experiments were performed with the obtained optimum conditions which resulted in improved PHA production. Good substrate degradation (as COD) of 68% was registered during PHA production. Dehydrogenase and phosphatase enzymatic activities were monitored during process operation. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. A hybrid Taguchi-artificial neural network approach to predict surface roughness during electric discharge machining of titanium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Sanjeev; Batish, Ajay [Thapar University, Patiala (India); Singh, Rupinder [GNDEC, Ludhiana (India); Singh, T. P. [Symbiosis Institute of Technology, Pune (India)

    2014-07-15

    In the present study, electric discharge machining process was used for machining of titanium alloys. Eight process parameters were varied during the process. Experimental results showed that current and pulse-on-time significantly affected the performance characteristics. Artificial neural network coupled with Taguchi approach was applied for optimization and prediction of surface roughness. The experimental results and the predicted results showed good agreement. SEM was used to investigate the surface integrity. Analysis for migration of different chemical elements and formation of compounds on the surface was performed using EDS and XRD pattern. The results showed that high discharge energy caused surface defects such as cracks, craters, thick recast layer, micro pores, pin holes, residual stresses and debris. Also, migration of chemical elements both from electrode and dielectric media were observed during EDS analysis. Presence of carbon was seen on the machined surface. XRD results showed formation of titanium carbide compound which precipitated on the machined surface.

  12. Optimization of operating parameters of ground source heat pump system for space heating and cooling by Taguchi method and utility concept

    International Nuclear Information System (INIS)

    Sivasakthivel, T.; Murugesan, K.; Thomas, H.R.

    2014-01-01

    Highlights: • Ground Source Heat Pump (GSHP) technology is suitable for both heating and cooling. • Important parameters that affect the GSHP performance has been listed. • Parameters of GSHP system has been optimized for heating and cooling mode. • Taguchi technique and utility concept are developed for GSHP optimization. - Abstract: Use of ground source energy for space heating applications through Ground Source Heat pump (GSHP) has been established as an efficient thermodynamic process. The electricity input to the GSHP can be reduced by increasing the COP of the system. However, the COP of a GSHP system will be different for heating and cooling mode operations. Hence in order to reduce the electricity input to the GSHP, an optimum value of COP has to be determined when GSHP is operated in both heating and cooling modes. In the present research, a methodology is proposed to optimize the operating parameters of a GSHP system which will operate on both heating and cooling modes. Condenser inlet temperature, condenser outlet temperature, dryness fraction at evaporator inlet and evaporator outlet temperature are considered as the influencing parameters of the heat pump. Optimization of these parameters for only heating or only cooling mode operation is achieved by employing Taguchi method for three level variations of the above parameters using an L 9 (3 4 ) orthogonal array. Higher the better concept has been used to get a higher COP. A computer program in FORTAN has been developed to carry out the computations and the results have been analyzed for the optimum conditions using Signal-to-Noise (SN) ratio and Analysis Of Variance (ANOVA) method. Based on this analysis, the maximum COP for only heating and only cooling operation are obtained as 4.25 and 3.32 respectively. By making use of the utility concept both the higher values of COP obtained for heating and cooling modes are optimized to get a single optimum COP for heating and cooling modes. A single

  13. Study of Nd:YAG laser annealing of electroless Ni-P film on spiegel-iron plate by Taguchi method and grey system theory

    Energy Technology Data Exchange (ETDEWEB)

    Liu, W.L. [Department of Materials Science and Engineering, National Formosa University, 64, Wunhua Road, Huwei, Yunlin 632, Taiwan (China); Chien, W.T.; Jiang, M.H. [Department of Mechanical Engineering, National Pingtung University of Science and Technology, 1, Shuehfu Road, Neipu, Pingtung 912, Taiwan (China); Chen, W.J., E-mail: chenwjau@yuntech.edu.t [Graduate School of Materials Science, National Yunlin University of Science and Technology, 123 University Road, Section 3, Douliou, Yunlin 64002, Taiwan (China)

    2010-04-09

    An electroless Ni-P film was first deposited on a spiegel-iron plate and then annealed by an Nd:YAG pulsed wave laser. In order to obtain the optimal laser annealing parameters for maximizing the hardness and minimizing the surface roughness of electroless Ni-P films, the Taguchi method and grey system theory were used to analyze the experimental data. The electroless Ni-P film was also characterized by scanning electron microscopy for the morphology, and transmission electron microscopy for the microstructure and crystal structure. The results showed that the hardness and the surface roughness of electroless Ni-P films can be, at the same time, improved to 50.8% and 68%, respectively, by the laser annealing with the optimal parameters.

  14. Study of Nd:YAG laser annealing of electroless Ni-P film on spiegel-iron plate by Taguchi method and grey system theory

    International Nuclear Information System (INIS)

    Liu, W.L.; Chien, W.T.; Jiang, M.H.; Chen, W.J.

    2010-01-01

    An electroless Ni-P film was first deposited on a spiegel-iron plate and then annealed by an Nd:YAG pulsed wave laser. In order to obtain the optimal laser annealing parameters for maximizing the hardness and minimizing the surface roughness of electroless Ni-P films, the Taguchi method and grey system theory were used to analyze the experimental data. The electroless Ni-P film was also characterized by scanning electron microscopy for the morphology, and transmission electron microscopy for the microstructure and crystal structure. The results showed that the hardness and the surface roughness of electroless Ni-P films can be, at the same time, improved to 50.8% and 68%, respectively, by the laser annealing with the optimal parameters.

  15. Editorial: Conflict of interest policy for Editors of The American Journal of Clinical Nutrition

    Science.gov (United States)

    Integrity in the publication process requires impartiality at all levels of review. The American Journal of Clinical Nutrition (AJCN) adheres to the policy of the International Committee of Medical Journal Editors (ICMJE), Uniform Requirements for Manuscripts Submitted to Biomedical Journals: Writin...

  16. Editors' message--Hydrogeology Journal in 2003

    Science.gov (United States)

    Voss, Clifford; Olcott, Perry; Schneider, Robert

    2004-01-01

    Hydrogeology Journal appeared in six issues containing a total of 710 pages and 48 major articles, including 31 Papers and 14 Reports, as well as some Technical Notes and Book Reviews. The number of submitted manuscripts continues to increase. The final issue of 2003 also contained the annual volume index. Hydrogeology Journal (HJ) is an international forum for hydrogeology and related disciplines and authors in 2003 were from about 28 countries. Articles advanced hydrogeologic science and described hydrogeologic systems in many regions worldwide. These articles focused on a variety of general topics and on studies of hydrogeology in 24 countries: Afghanistan, Algeria, Argentina, Australia, Bangladesh, Belgium, Canada, Chile, China, Denmark, France, India, Italy, Mexico, Netherlands, New Zealand, Nigeria, Norway, Portugal, Russia, South Africa, Switzerland, Turkey, and U.S.A. The Guest Editor of the 2003 HJ theme issue on “Hydromechanics in Geology and Geotechnics”, Ove Stephansson, assembled a valuable collection of technical reviews and research papers from eminent authors on important aspects of the subject area.

  17. Development of a conversational text editor on MITRA 125 used with a TEKTRONIX 4014 display console

    International Nuclear Information System (INIS)

    Siffre, Evelyne.

    1980-06-01

    The purpose of this study, which falls within the purview of a nuclear physics research laboratory, is the development of a simple to use conversational text editor to mitigate the defects of the MMT2 monitor. The operations to be executed are: - creation of a source file written in FORTRAN - concatenation of the various stages to obtain a workable program: FORTRAN compilation, edition of links, group generation; - execution of this program. These operations are performed in two different ways: 1) by using the system controls as from the teleprinter (this corresponds to the previous use). The sequence of controls to be effected is described; 2) by using the EDI 125 conversational editor [fr

  18. Optimization of friction welding by taguchi and ANOVA method on commercial aluminium tube to Al 2025 tube plate with backing block using an external tool

    International Nuclear Information System (INIS)

    Kanna, S.; Kumaraswamidhs, L. A.; Kumaran, S. Senthil

    2016-01-01

    The aim of the present work is to optimize the Friction welding of tube to tube plate using an external tool (FWTPET) with clearance fit of commercial aluminum tube to Al 2025 tube plate using an external tool. Conventional frictional welding is suitable to weld only symmetrical joints either tube to tube or rod to rod but in this research with the help of external tool, the welding has been done by unsymmetrical shape of tube to tube plate also. In this investigation, the various welding parameters such as tool rotating speed (rpm), projection of tube (mm) and depth of cut (mm) are determined according to the Taguchi L9 orthogonal array. The two conditions were considered in this process to examine this experiment; where condition 1 is flat plate with plain tube Without holes [WOH] on the circumference of the surface and condition 2 is flat plate with plane tube has holes on its circumference of the surface With holes [WH]. Taguchi L9 orthogonal array was utilized to find the most significant control factors which will yield better joint strength. Besides, the most influential process parameter has been determined using statistical Analysis of variance (ANOVA). Finally, the comparison of each result has been done for conditions by means percentage of contribution and regression analysis. The general regression equation is formulated and better strength is obtained and it is validated by means of confirmation test. It was observed that value of optimal welded joint strength for both tube without holes and tube with holes are to be 319.485 MPa and 264.825 MPa, respectively.

  19. Optimization of friction welding by taguchi and ANOVA method on commercial aluminium tube to Al 2025 tube plate with backing block using an external tool

    Energy Technology Data Exchange (ETDEWEB)

    Kanna, S.; Kumaraswamidhs, L. A. [Indian Institute of Technology, Dhanbad (India); Kumaran, S. Senthil [RVS School of Engineering and Technology, Dindigul (India)

    2016-05-15

    The aim of the present work is to optimize the Friction welding of tube to tube plate using an external tool (FWTPET) with clearance fit of commercial aluminum tube to Al 2025 tube plate using an external tool. Conventional frictional welding is suitable to weld only symmetrical joints either tube to tube or rod to rod but in this research with the help of external tool, the welding has been done by unsymmetrical shape of tube to tube plate also. In this investigation, the various welding parameters such as tool rotating speed (rpm), projection of tube (mm) and depth of cut (mm) are determined according to the Taguchi L9 orthogonal array. The two conditions were considered in this process to examine this experiment; where condition 1 is flat plate with plain tube Without holes [WOH] on the circumference of the surface and condition 2 is flat plate with plane tube has holes on its circumference of the surface With holes [WH]. Taguchi L9 orthogonal array was utilized to find the most significant control factors which will yield better joint strength. Besides, the most influential process parameter has been determined using statistical Analysis of variance (ANOVA). Finally, the comparison of each result has been done for conditions by means percentage of contribution and regression analysis. The general regression equation is formulated and better strength is obtained and it is validated by means of confirmation test. It was observed that value of optimal welded joint strength for both tube without holes and tube with holes are to be 319.485 MPa and 264.825 MPa, respectively.

  20. Optimization of Experimental Conditions of the Pulsed Current GTAW Parameters for Mechanical Properties of SDSS UNS S32760 Welds Based on the Taguchi Design Method

    Science.gov (United States)

    Yousefieh, M.; Shamanian, M.; Saatchi, A.

    2012-09-01

    Taguchi design method with L9 orthogonal array was implemented to optimize the pulsed current gas tungsten arc welding parameters for the hardness and the toughness of super duplex stainless steel (SDSS, UNS S32760) welds. In this regard, the hardness and the toughness were considered as performance characteristics. Pulse current, background current, % on time, and pulse frequency were chosen as main parameters. Each parameter was varied at three different levels. As a result of pooled analysis of variance, the pulse current is found to be the most significant factor for both the hardness and the toughness of SDSS welds by percentage contribution of 71.81 for hardness and 78.18 for toughness. The % on time (21.99%) and the background current (17.81%) had also the next most significant effect on the hardness and the toughness, respectively. The optimum conditions within the selected parameter values for hardness were found as the first level of pulse current (100 A), third level of background current (70 A), first level of % on time (40%), and first level of pulse frequency (1 Hz), while they were found as the second level of pulse current (120 A), second level of background current (60 A), second level of % on time (60%), and third level of pulse frequency (5 Hz) for toughness. The Taguchi method was found to be a promising tool to obtain the optimum conditions for such studies. Finally, in order to verify experimental results, confirmation tests were carried out at optimum working conditions. Under these conditions, there were good agreements between the predicted and the experimental results for the both hardness and toughness.

  1. Application of Taguchi method for separation of uranium from acetate bearing wastewater using hydroxamic acid based sorbent

    International Nuclear Information System (INIS)

    Satpati, S.K.; Hareendran, K.; Roy, S.B.; Vaidya, A.; Bankar, V.; Dasgupta, K.; Pal, S.

    2016-01-01

    Separation and recovery of uranium from effluent of nuclear facility has drawn immense attention in separation science research. The acetic acid based uranium solution effluent generated in uranium metal powder production facility was targeted for the study. Solid state separation technique has been employed using hydroxamic acid based chelating sorbent because of several advantages. In the study, the sorbent performances have been evaluated for its important parameters like isotherm, efficiency and kinetics. The equilibrium adsorption capacity (q e ) and distribution coefficient (K d ) of U(VI) have been evaluated as 3.24 mg/g sorbent and 805 ml/g sorbent respectively. Uranium has been recovered using HCl solution. Uranium removal from the feed was found to be more than 95% and the recovery of uranium was more than 99% from the adsorbed phase. Elution process is faster than sorption process. Taguchi optimization method has been applied for designing experimental study and also to identify the optimum operational conditions for uranium separation process.The developed process is useful for separation and recovery of uranium from acetate bearing wastewater generated in uranium processing facilities

  2. KAJIAN KUAT BENDING DAN KADAR AIR PADA KOMPOSIT DARI SEKAM PADI DAN SERAT BAMBU MENGGUNAKAN STATISTIK TAGUCHI

    Directory of Open Access Journals (Sweden)

    Joko Yunianto Prihatin

    2017-11-01

    Full Text Available Kayu merupakan komoditi utama dalam pembuatan mebel yang berasal dari alam. Dewasa ini penyusutan  hutan  dunia  telah  mengkhawatirkan mencapai  80%.  Sehingga  kebutuhan  oksigen  akan menurun karena tidak sesuai dengan upaya reboisasi. Disisi lain bambu memiliki kelebihan dalam hal masa panen yang lebih cepat berkisar 2–3 tahun. Sedangkan sekam padi adalah limbah yang dihasilkan dari kegiatan pengolahan hasil pertanian yang pemanfaatannya selama ini hanya sebagai bahan pembantu dalam aktifitas produksi, maka nilai ekonomis sekam padi ini sangat rendah. Berdasarkan permasalahan diatas, maka penelitian ini dititik beratkan pada pembuatan komposit anyaman bambu dan sekam padi sebagai pengganti kayu dalam industri mebel. Penelitian ini menggunakan desain eksperimen statistik taguchi, sehingga meghasilkan nilai kuat bending optimal 35,58N/mm2 dengan kadar air 0,334%. Kondisi optimal tersebut terdiri dari A3B2C2D1 Variasi anyaman Satin, Tekanan hidrolik 60N, Waktu pemanasan sebelum pengecoran pada suhu 105oC adalah 45 menit, dan Komposisi = Resin 100 : Katalis 0,75.

  3. Esthetic or Functional, Saccharine or Shocking? An Editor Looks at Values in Children's Books.

    Science.gov (United States)

    Giblin, James Cross

    1977-01-01

    Discusses artistic or esthetic, social and cultural, functional, and commercial values looked for by children's book editors in selecting and publishing manuscripts. Also reviews changes in social and cultural values as shown by children's books published in 1947, 1957, and 1967. (GT)

  4. What Does It Take to Change an Editor's Mind? Identifying Minimally Important Difference Thresholds for Peer Reviewer Rating Scores of Scientific Articles.

    Science.gov (United States)

    Callaham, Michael; John, Leslie K

    2018-01-05

    We define a minimally important difference for the Likert-type scores frequently used in scientific peer review (similar to existing minimally important differences for scores in clinical medicine). The magnitude of score change required to change editorial decisions has not been studied, to our knowledge. Experienced editors at a journal in the top 6% by impact factor were asked how large a change of rating in "overall desirability for publication" was required to trigger a change in their initial decision on an article. Minimally important differences were assessed twice for each editor: once assessing the rating change required to shift the editor away from an initial decision to accept, and the other assessing the magnitude required to shift away from an initial rejection decision. Forty-one editors completed the survey (89% response rate). In the acceptance frame, the median minimally important difference was 0.4 points on a scale of 1 to 5. Editors required a greater rating change to shift from an initial rejection decision; in the rejection frame, the median minimally important difference was 1.2 points. Within each frame, there was considerable heterogeneity: in the acceptance frame, 38% of editors did not change their decision within the maximum available range; in the rejection frame, 51% did not. To our knowledge, this is the first study to determine the minimally important difference for Likert-type ratings of research article quality, or in fact any nonclinical scientific assessment variable. Our findings may be useful for future research assessing whether changes to the peer review process produce clinically meaningful differences in editorial decisionmaking. Copyright © 2017 American College of Emergency Physicians. Published by Elsevier Inc. All rights reserved.

  5. Taguchi Experimental Design for Optimization of Recombinant Human Growth Hormone Production in CHO Cell Lines and Comparing its Biological Activity with Prokaryotic Growth Hormone.

    Science.gov (United States)

    Aghili, Zahra Sadat; Zarkesh-Esfahani, Sayyed Hamid

    2018-02-01

    Growth hormone deficiency results in growth retardation in children and the GH deficiency syndrome in adults and they need to receive recombinant-GH in order to rectify the GH deficiency symptoms. Mammalian cells have become the favorite system for production of recombinant proteins for clinical application compared to prokaryotic systems because of their capability for appropriate protein folding, assembly, post-translational modification and proper signal. However, production level in mammalian cells is generally low compared to prokaryotic hosts. Taguchi has established orthogonal arrays to describe a large number of experimental situations mainly to reduce experimental errors and to enhance the efficiency and reproducibility of laboratory experiments.In the present study, rhGH was produced in CHO cells and production of rhGH was assessed using Dot blotting, western blotting and Elisa assay. For optimization of rhGH production in CHO cells using Taguchi method An M16 orthogonal experimental design was used to investigate four different culture components. The biological activity of rhGH was assessed using LHRE-TK-Luciferase reporter gene system in HEK-293 and compared to the biological activity of prokaryotic rhGH.A maximal productivity of rhGH was reached in the conditions of 1%DMSO, 1%glycerol, 25 µM ZnSO 4 and 0 mM NaBu. Our findings indicate that control of culture conditions such as the addition of chemical components helps to develop an efficient large-scale and industrial process for the production of rhGH in CHO cells. Results of bioassay indicated that rhGH produced by CHO cells is able to induce GH-mediated intracellular cell signaling and showed higher bioactivity when compared to prokaryotic GH at the same concentrations. © Georg Thieme Verlag KG Stuttgart · New York.

  6. Abrasive wear response of TIG-melted TiC composite coating: Taguchi approach

    Science.gov (United States)

    Maleque, M. A.; Bello, K. A.; Adebisi, A. A.; Dube, A.

    2017-03-01

    In this study, Taguchi design of experiment approach has been applied to assess wear behaviour of TiC composite coatings deposited on AISI 4340 steel substrates by novel powder preplacement and TIG torch melting processes. To study the abrasive wear behaviour of these coatings against alumina ball at 600° C, a Taguchi’s orthogonal array is used to acquire the wear test data for determining optimal parameters that lead to the minimization of wear rate. Composite coatings are developed based on Taguchi’s L-16 orthogonal array experiment with three process parameters (welding current, welding speed, welding voltage and shielding gas flow rate) at four levels. In this technique, mean response and signal-to-noise ratio are used to evaluate the influence of the TIG process parameters on the wear rate performance of the composite coated surfaces. The results reveal that welding voltage is the most significant control parameter for minimizing wear rate while the current presents the least contribution to the wear rate reduction. The study also shows the best optimal condition has been arrived at A3 (90 A), B4 (2.5 mm/s), C3 (30 V) and D3 (20 L/min), which gives minimum wear rate in TiC embedded coatings. Finally, a confirmatory experiment has been conducted to verify the optimized result and shows that the error between the predicted values and the experimental observation at the optimal condition lies within the limit of 4.7 %. Thus, the validity of the optimum condition for the coatings is established.

  7. EDITORIAL: Greetings from the new Editor-in-Chief Greetings from the new Editor-in-Chief

    Science.gov (United States)

    Gardner, Jason S.

    2012-01-01

    As I begin my tenure as Editor-in-Chief of Journal of Physics: Condensed Matter (JPCM), I look upon this opportunity as both an honour and a real challenge. The journal is in great shape thanks to the work of my predecessors, Marshall Stoneham and David Ferry. The journal's solid reputation is based largely on the work these gentlemen have done over the past decade. The other main reason for the success of JPCM is the amazing staff in Bristol; keep up the good work, please. When discussing the journal with scientists from all corners of the globe, one thing is always mentioned—JPCM is a very reliable journal with well-written, high-quality papers, and a fast but rigorous peer-review process that provides fair, detailed and constructive referee reports for the benefit of authors. This is due almost entirely to our great authors and referees; we rely on them every day—thank you. As the new Editor-in-Chief I hope to continue to improve still further the journal's status in condensed matter science. As mentioned above, our reputation is excellent, but the reality is that we live in a world of bibliometrics and rankings. Over the past few years JPCM has been repositioned as a journal at the forefront of condensed matter physics, and the impact of the journal should increase further as a result of continued emphasis on commissioning in cutting-edge areas identified by the Editorial Board and the journal team. In addition to regular papers, JPCM has a number of other content streams that authors and readers can benefit from. Fast track communications (FTCs) offer exceptionally fast publication for work of the highest impact and urgency. By their select nature, FTCs benefit from personal treatment by the Editorial Board and the average receipt-to-first-decision time is just 11 days (the average receipt-to-publication time is just 45 days). Topical reviews in JPCM make the journal one of the most authoritative sources of review content for condensed matter physics

  8. ACT OF IMPLEMENTATION OF TOYOTA SYSTEM

    OpenAIRE

    Damjan Stanojević; Slobodan Stefanović; Branislav Stanisavljević; Dragoslav Ilić

    2013-01-01

    The production system developed by Toyota Motor Corporation was developed to provide best quality, lowest costs, and shortest lead time through the elimination of losts. Kiichiro Toyota, son of Sakichi and founder of the Toyota automobile factory, developed the concept of Just-in-Time in the 1930's. He decreed that by this act Toyota would contain no excess inventory and that Toyota would strive to work both in partnership with suppliers and level production. The Toyot...

  9. Optimization of sol-gel technique for coating of metallic substrates by hydroxyapatite using the Taguchi method

    Science.gov (United States)

    Pourbaghi-Masouleh, M.; Asgharzadeh, H.

    2013-08-01

    In this study, the Taguchi method of design of experiment (DOE) was used to optimize the hydroxyapatite (HA) coatings on various metallic substrates deposited by sol-gel dip-coating technique. The experimental design consisted of five factors including substrate material (A), surface preparation of substrate (B), dipping/withdrawal speed (C), number of layers (D), and calcination temperature (E) with three levels of each factor. An orthogonal array of L18 type with mixed levels of the control factors was utilized. The image processing of the micrographs of the coatings was conducted to determine the percentage of coated area ( PCA). Chemical and phase composition of HA coatings were studied by XRD, FT-IR, SEM, and EDS techniques. The analysis of variance (ANOVA) indicated that the PCA of HA coatings was significantly affected by the calcination temperature. The optimum conditions from signal-to-noise ( S/N) ratio analysis were A: pure Ti, B: polishing and etching for 24 h, C: 50 cm min-1, D: 1, and E: 300 °C. In the confirmation experiment using the optimum conditions, the HA coating with high PCA of 98.5 % was obtained.

  10. Martin Stutzmann: Editor, Teacher, Scientist and Friend

    Science.gov (United States)

    Cardona, Manuel

    2005-03-01

    On 2 January 1995 Martin Stutzmann became Editor-in-Chief of physica status solidi, replacing Professor E. Gutsche, who had led the journal through the stormy period involving the fall of the Iron Curtain, the unification of Germany and the change in its Eastern part, where physica status solidi was based, from socialism as found in the real world (a German concept) to real world capitalism. In 1995 it was thought that the process had been completed (we should have known better!) and after the retirement of Prof. Gutsche the new owners of physica status solidi (Wiley-VCH) decided that a change in scientific management was desirable to adapt to the new socio-political facts and to insure the scientific continuity of the journal.Martin had moved in 1993 from my department at the Max-Planck-Institute to Munich where he soon displayed a tremendous amount of science man- agement ability during the build-up of the Walter Schottky Institute. The search for a successor as Edi- tor-in-Chief was not easy: the job was not very glamorous after the upheavals which had taken place in the editorial world following the political changes. Somebody in the Editorial Boards must have suggested Martin Stutzmann. I am sure that there was opposition: one usually looks for a well-established person ready to leave his direct involvement in science and take up a new endeavor of a more administrative nature. Nevertheless, the powers that be soon realized that Martin was an excellent, if somewhat unconventional candidate who had enough energy to remain a topnotch scientist and to lead the journal in the difficult times ahead: he was offered the job. In the negotiations that followed, he insisted in getting the administrative structures that would allow him to improve the battered quality of the journal and to continue his scientific productivity. Today we are happy to see that he succeeded in both endeavors. The journal has since grown in size and considerably improved its quality

  11. Comments on ``Anonymous Reviews'' An Editor's View of Anonymous Reviews

    Science.gov (United States)

    Goff, John A.

    I have read with great interest the recent Forum commentaries in Eos by Myrl Beck, Charles Robinove, Robert Criss, and Anne Hofmeister regarding anonymous reviews. I heartily support their position that anonymous reviews should be avoided. I have not written an anonymous review in ages (and regret the few that I did), and have always appreciated and respected greatly anyone who signs a critical review of one of my own papers. However, I would like to add some perspective from the editorial standpoint. I have served as JGR associate editor for 3 years (never anonymously!), and as Eos editor for seismology and tectonophysics for 4. Over the years, I have rejected a fair number of papers, most of those based on anonymous reviews (fortunately, none of the above commentators was one of them). The vast majority of anonymous reviews I received were well considered. While I would wish that all reviews were signed, I don't think we can summarily dismiss the fear that many would have of enmity and reprisal over a critical review. Some of these fears are likely justified. On more than one occasion, have I witnessed overly aggressive responses on the part of authors to anonymous reviews that I considered to be entirely fair and constructive in their criticisms. I do think we need to do all we can to discourage anonymous reviews, but it will be difficult to completely remove that choice from the process.

  12. Supercritical CO2 extraction of candlenut oil: process optimization using Taguchi orthogonal array and physicochemical properties of the oil.

    Science.gov (United States)

    Subroto, Erna; Widjojokusumo, Edward; Veriansyah, Bambang; Tjandrawinata, Raymond R

    2017-04-01

    A series of experiments was conducted to determine optimum conditions for supercritical carbon dioxide extraction of candlenut oil. A Taguchi experimental design with L 9 orthogonal array (four factors in three levels) was employed to evaluate the effects of pressure of 25-35 MPa, temperature of 40-60 °C, CO 2 flow rate of 10-20 g/min and particle size of 0.3-0.8 mm on oil solubility. The obtained results showed that increase in particle size, pressure and temperature improved the oil solubility. The supercritical carbon dioxide extraction at optimized parameters resulted in oil yield extraction of 61.4% at solubility of 9.6 g oil/kg CO 2 . The obtained candlenut oil from supercritical carbon dioxide extraction has better oil quality than oil which was extracted by Soxhlet extraction using n-hexane. The oil contains high unsaturated oil (linoleic acid and linolenic acid), which have many beneficial effects on human health.

  13. Optimization of Micro-Alloying Elements for Mechanical Properties in Normalized Cast Steel Using Taguchi Technique

    Directory of Open Access Journals (Sweden)

    Chokkalingam B.

    2017-06-01

    Full Text Available In this study, Taguchi method is used to find out the effect of micro alloying elements like vanadium, niobium and titanium on the hardness and tensile strength of the normalized cast steel. Based on this method, plan of experiments were made by using orthogonal arrays to acquire the data on hardness and tensile strength. The signal to noise ratio and analysis of variance (ANOVA are used to investigate the effect of these micro alloying elements on these two mechanical properties of the micro alloyed normalized cast steel. The results indicated that in the micro alloyed normalized cast steel both these properties increases when compared to non-micro-alloyed normalized cast steel. The effect of niobium addition was found to be significantly higher to obtain higher hardness and tensile strength when compared to other micro alloying elements. The maximum hardness of 200HV and the maximum tensile strength of 780 N/mm2 were obtained in 0.05%Nb addition micro alloyed normalized cast steel. Micro-alloyed with niobium normalized cast steel have the finest and uniform microstructure and fine pearlite colonies distributed uniformly in the ferrite. The optimum condition to obtain higher hardness and tensile strength were determined. The results were verified with experiments.

  14. Dimensional accuracy optimization of the micro-plastic injection molding process using the Taguchi design method

    Directory of Open Access Journals (Sweden)

    Chil-Chyuan KUO KUO

    2015-06-01

    Full Text Available Plastic injection molding is an important field in manufacturing industry because there are many plastic products that produced by injection molding. However, the time and cost required for producing a precision mold are the most troublesome problems that limit the application at the development stage of a new product in precision machinery industry. This study presents an approach of manufacturing a hard mold with microfeatures for micro-plastic injection molding. This study also focuses on Taguchi design method for investigating the effect of injection parameters on the dimensional accuracy of Fresnel lens during plastic injection molding. It was found that the dominant factor affecting the microgroove depth of Fresnel lens is packing pressure. The optimum processing parameters are packing pressure of 80 MPa, melt temperature of 240 °C, mold temperature of 90 °C and injection speed of 50 m/s. The dimensional accuracy of Fresnel lens can be controlled within ±3 µm using the optimum level of process parameters through the confirmation test. The research results of this study have industrial application values because electro-optical industries are able to significantly reduce a new optical element development cycle time.DOI: http://dx.doi.org/10.5755/j01.ms.21.2.5864

  15. Expectations in case of event - from a television editor's point of view

    International Nuclear Information System (INIS)

    Engelhardt, H.

    1997-01-01

    Informing the public about emergencies requires two different phases a of necessary operation: (1) a pre-event culture of permanent relations and communication, training authors and editors, and footage-providing, and (2) a mobile information task force to be alerted very quickly in case of event. Special television needings and recommandations are elaborated, the legal duties of german public radio and television corporations are outlined. (orig.) [de

  16. Experimental Investigation and Taguchi Optimisation of Drilling Properties on Teak Wood Reinforced Epoxy Resin

    Science.gov (United States)

    Lilly Mercy, J.; Shaqir Tanvir, Mohamed; Swaroopkanth, K.

    2017-05-01

    The drilling properties of teak reinforced epoxy resin composite are explored in this work. The thrust force and temperature during the drilling process was found and optimised. Nine holes were drilled in accordance with L9 orthogonal array on Medium Density Fibre board and Teak wood reinforced epoxy composite board and the thrust force and temperature induced during drilling is measured. Drilling experiments were conducted using CNC Vertical drilling machine and the thrust force was measured using dynamometer and temperature using infra-red thermometer. The experiments were conducted with varying levels of spindle speed and feed rate and optimised using Taguchi optimisation. It was observed that higher thrust and temperature were observed while drilling teak wood composite due to the high mechanical strength of teak wood. The hard and brittle properties of the resin seemed to be more pronounced in the composite. The experimental results were optimised to find the best combination of input parameters for reduced thrust and temperature. When speed increases, thrust force decreases and temperature increases. When feed increases, thrust force increases and temperature decreases. Experimental findings encouragesto use teak wood reinforced epoxy resin as a substitute for the traditionally used Medium Density Fibre Board. The percentage of mixing of teak dust can be increased with various resin combinations to arrive at the best suitable combination for obtaining optimal mechanical properties.

  17. Improved Stress Corrosion Cracking Resistance and Strength of a Two-Step Aged Al-Zn-Mg-Cu Alloy Using Taguchi Method

    Science.gov (United States)

    Lin, Lianghua; Liu, Zhiyi; Ying, Puyou; Liu, Meng

    2015-12-01

    Multi-step heat treatment effectively enhances the stress corrosion cracking (SCC) resistance but usually degrades the mechanical properties of Al-Zn-Mg-Cu alloys. With the aim to enhance SCC resistance as well as strength of Al-Zn-Mg-Cu alloys, we have optimized the process parameters during two-step aging of Al-6.1Zn-2.8Mg-1.9Cu alloy by Taguchi's L9 orthogonal array. In this work, analysis of variance (ANOVA) was performed to find out the significant heat treatment parameters. The slow strain rate testing combined with scanning electron microscope and transmission electron microscope was employed to study the SCC behaviors of Al-Zn-Mg-Cu alloy. Results showed that the contour map produced by ANOVA offered a reliable reference for selection of optimum heat treatment parameters. By using this method, a desired combination of mechanical performances and SCC resistance was obtained.

  18. Bioremediation of chlorpyrifos contaminated soil by two phase bioslurry reactor: Processes evaluation and optimization by Taguchi's design of experimental (DOE) methodology.

    Science.gov (United States)

    Pant, Apourv; Rai, J P N

    2018-04-15

    Two phase bioreactor was constructed, designed and developed to evaluate the chlorpyrifos remediation. Six biotic and abiotic factors (substrate-loading rate, slurry phase pH, slurry phase dissolved oxygen (DO), soil water ratio, temperature and soil micro flora load) were evaluated by design of experimental (DOE) methodology employing Taguchi's orthogonal array (OA). The selected six factors were considered at two levels L-8 array (2^7, 15 experiments) in the experimental design. The optimum operating conditions obtained from the methodology showed enhanced chlorpyrifos degradation from 283.86µg/g to 955.364µg/g by overall 70.34% of enhancement. In the present study, with the help of few well defined experimental parameters a mathematical model was constructed to understand the complex bioremediation process and optimize the approximate parameters upto great accuracy. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. A qualidade das publicações científicas: considerações de um Editor de Área ao final do mandato Quality of scientific puplications: considerations of an editor at the end of the mandate

    Directory of Open Access Journals (Sweden)

    Ulysses Paulino de Albuquerque

    2009-03-01

    Full Text Available A qualidade das publicações científicas vem sendo discutida na atualidade considerando diferentes perspectivas. Neste texto, examina-se alguns dos principais problemas relativos à produção textual em ciência, com ênfase para os considerados de má conduta. Adicionalmente, são apresentadas sugestões para autores, revisores e editores no sentido de evitar condutas inadequadas no processo de publicação de trabalhos científicos.Quality of scientific publications is being currently discussed considering different perspectives. In this text, we examine some of the main problems concerning textual production in science, emphasizing those considered of bad behaviors. Additionally, we present suggestions for authors, reviewers and editors in order to avoid misconducts in the publication process of scientific papers.

  20. Simultaneous improvement of surface quality and productivity using grey relational analysis based Taguchi design for turning couple (AISI D3 steel/ mixed ceramic tool (Al2O3 + TiC

    Directory of Open Access Journals (Sweden)

    Oussama Zerti

    2017-07-01

    Full Text Available Current optimization strategies are based on the increase the productivity and the quality with lower cost in short time. Grey relational analysis “GRA” based on Taguchi design was proposed in this paper for simultaneous improvement of surface quality and productivity. The turning trials based on mixed Taguchi L18 factorial plan were conducted under dry cutting conditions for the machining couple: AISI D3 steel/mixed ceramic inserts (CC650. The machining parameters taken into account during this study are as follow: major cutting edge angle (χr, cutting insert nose radius (r, cutting speed (Vc, feed rate (f, and depth of cut (ap. Significant effects of machining parameters and their interactions were evaluated by the analysis of variance. Through this analysis, it have been found clearly that feed rate and cutting insert nose radius had a big significant effects on surface quality while depth of cut, feed rate followed by cutting speed had a major effect on productivity. The mathematical relationship between the machining parameters and the performance characteristics was formulated by using a linear regression model with interactions. Optimal levels of parametric combination for achieving the higher surface quality with maximum productivity were selected by grey relational analysis which is based on the high value of grey relational grade. Confirmation experiments were carried out to prove the powerful improvement of experimental results and to validate the effectiveness of the multi-optimization technique applied in this paper.

  1. Editorial: Letter from the Editors

    Directory of Open Access Journals (Sweden)

    Andreas Zick

    2015-07-01

    Full Text Available Editorial 8(2 We are pleased to present issue 8 (2. The focus section is edited by Helmut Thome (University of Halle-Wittenberg, Germany and Steven F. Messner (University at Albany, United States, and focuses on methodological constraints, options, and solutions in longitudinal research on criminal violence. We are honored that Helmut Thome, Steven Messner, and the contributors offer their scientific knowledge and evidence in the interests of gaining a deeper understanding of one of the most promising methodological approaches in conflict and violence research, i.e. longitudinal data analyses. Sincere thanks to the editors and authors for opening up the potential of this specific kind of research for advances to better assess and understand criminal violence in a long term perspective. We hope this issue will be discussed and quoted in the interdisciplinary community of researchers. The open section again fulfills its aim to foster contributions on diverse topics in the field of conflict and violence, starting with an analysis of Southeast Asian media reception of the Israeli/Palestine conflict. The second paper shows how social cohesion activities have the potential to change disparaging attitudes in Cyprus. The third and final contribution examines teen dating violence in Switzerland from various angles.

  2. An editor for the maintenance and use of a bank of contracted Gaussian basis set functions

    International Nuclear Information System (INIS)

    Taurian, O.E.

    1984-01-01

    A bank of basis sets to be used in ab-initio calculations has been created. The bases are sets of contracted Gaussian type orbitals to be used as input to any molecular integral package. In this communication we shall describe the organization of the bank and a portable editor program which was designed for its maintenance and use. This program is operated by commands and it may be used to obtain any kind of information about the bases in the bank as well as to produce output to be directly used as input for different integral programs. The editor may also be used to format basis sets in the conventional way utilized in publications, as well as to generate a complete, or partial, manual of the contents of the bank if so desired. (orig.)

  3. News from the editors of Fluids and Barriers of the CNS.

    Science.gov (United States)

    Drewes, Lester R; Jones, Hazel C; Keep, Richard F

    2014-01-01

    This editorial announces a new affiliation between Fluids and Barriers of the CNS (FBCNS) and the International Brain Barriers Society (IBBS) with mutual benefits to the journal and to society members. This is a natural progression from the appointment of two new Co-Editors in Chief: Professor Lester Drewes and Professor Richard Keep in 2013. FBCNS provides a unique and specialist platform for the publication of research in the expanding fields of brain barriers and brain fluid systems in both health and disease.

  4. Why do we need international standards on responsible research publication for authors and editors?

    OpenAIRE

    Wager, Elizabeth; Kleinert, Sabine

    2013-01-01

    Delivering the best possible healthcare requires a reliable evidence-base of research publications. Both authors and editors have responsibilities when publishing research yet it can be hard to find guidance on these. Most journal instructions concentrate on style and formatting but give little or no information about research and publication ethics.

  5. Investigation and Taguchi Optimization of Microbial Fuel Cell Salt Bridge Dimensional Parameters

    Science.gov (United States)

    Sarma, Dhrupad; Barua, Parimal Bakul; Dey, Nabendu; Nath, Sumitro; Thakuria, Mrinmay; Mallick, Synthia

    2018-01-01

    One major problem of two chamber salt bridge microbial fuel cells (MFCs) is the high resistance offered by the salt bridge to anion flow. Many researchers who have studied and optimized various parameters related to salt bridge MFC, have not shed much light on the effect of salt bridge dimensional parameters on the MFC performance. Therefore, the main objective of this research is to investigate the effect of length and cross sectional area of salt bridge and the effect of solar radiation and atmospheric temperature on MFC current output. An experiment has been designed using Taguchi L9 orthogonal array, taking length and cross sectional area of salt bridge as factors having three levels. Nine MFCs were fabricated as per the nine trial conditions. Trials were conducted for 3 days and output current of each of the MFCs along with solar insolation and atmospheric temperature were recorded. Analysis of variance shows that salt bridge length has significant effect both on mean (with 53.90% contribution at 95% CL) and variance (with 56.46% contribution at 87% CL), whereas the effect of cross sectional area of the salt bridge and the interaction of these two factors is significant on mean only (with 95% CL). Optimum combination was found at 260 mm salt bridge length and 506.7 mm2 cross sectional area with 4.75 mA of mean output current. The temperature and solar insolation data when correlated with each of the MFCs average output current, revealed that both external factors have significant impact on MFC current output but the correlation coefficient varies from MFC to MFC depending on salt bridge dimensional parameters.

  6. Modification to the Monte Carlo N-Particle (MCNP) Visual Editor (MCNPVised) to Read in Computer Aided Design (CAD) Files

    International Nuclear Information System (INIS)

    Randolph Schwarz; Leland L. Carter; Alysia Schwarz

    2005-01-01

    Monte Carlo N-Particle Transport Code (MCNP) is the code of choice for doing complex neutron/photon/electron transport calculations for the nuclear industry and research institutions. The Visual Editor for Monte Carlo N-Particle is internationally recognized as the best code for visually creating and graphically displaying input files for MCNP. The work performed in this grant was used to enhance the capabilities of the MCNP Visual Editor to allow it to read in both 2D and 3D Computer Aided Design (CAD) files, allowing the user to electronically generate a valid MCNP input geometry

  7. MO-FG-CAMPUS-TeP2-03: Multi-Criteria Optimization Using Taguchi Method for SRS of Multiple Lesions by Single Isocenter

    Energy Technology Data Exchange (ETDEWEB)

    Alani, S; Honig, N; Schlocker, A; Corn, B [Tel Aviv Medical Center, Tel Aviv (Israel)

    2016-06-15

    Purpose: This study utilizes the Taguchi Method to evaluate the VMAT planning parameters of single isocenter treatment plans for multiple brain metastases. An optimization model based on Taguchi and utility concept is employed to optimize the planning parameters including: arc arrangement, calculation grid size, calculation model, and beam energy on multiple performance characteristics namely conformity index and dose to normal brain. Methods: Treatment plans, each with 4 metastatic brain lesions were planned using single isocenter technique. The collimator angles were optimized to avoid open areas. In this analysis four planning parameters (a–d) were considered: (a)-Arc arrangements: set1: Gantry 181cw179 couch0; gantry179ccw0, couch315; and gantry0ccw181, couch45. set2: set1 plus additional arc: Gantry 0cw179, couch270. (b)-Energy: 6-MV; 6MV-FFF (c)-Calculation grid size: 1mm; 1.5mm (d)-Calculation models: AAA; Acuros Treatment planning was performed in Varian Eclipse (ver.11.0.30). A suitable orthogonal array was selected (L8) to perform the experiments. After conducting the experiments with the combinations of planning parameters the conformity index (CI) and the normal brain dose S/N ratio for each parameter was calculated. Optimum levels for the multiple response optimizations were determined. Results: We determined that the factors most affecting the conformity index are arc arrangement and beam energy. These tests were also used to evaluate dose to normal brain. In these evaluations, the significant parameters were grid size and calculation model. Using the utility concept we determined the combination of each of the four factors tested in this study that most significantly influence quality of the resulting treatment plans: (a)-arc arrangement-set2, (b)-6MV, (c)-calc.grid 1mm, (d)-Acuros algorithm. Overall, the dominant significant influences on plan quality are (a)-arcarrangement, and (b)-beamenergy. Conclusion: Results were analyzed using ANOVA and

  8. How Well Do Americans Know Geography? "National Geographic" Editor Discusses Meaning for Schools (Interview).

    Science.gov (United States)

    Koerner, Thomas

    1987-01-01

    Gilbert Grosvenor, editor of "National Geographic," is interviewed about the importance of geography for Americans. He claims our lack of geographic knowledge impedes our ability to act and compete in the world market as a world power and points out that geographic ignorance extends to people employed at high levels of government. (MD)

  9. An International Call for Democratizing the Academic Journal Culture from a Community of Editors

    Science.gov (United States)

    Mullen, Carol A.; Pryor, Caroline R.; Browne-Ferrigno, Tricia; Harris, Sandra L.

    2013-01-01

    In our reflective essay from our multiple perspectives as journal editors, peer reviewers, and published authors, we present ideas about editorial support, democracy, and innovation in the publishing process. As four tenured professors who work in universities in the states of Illinois, Virginia, Texas, and Kentucky, we are a community of editors…

  10. Optimization of de-esterified tragacanth microcapsules by computational fluid dynamic and the Taguchi design with purpose of the cell encapsulation.

    Science.gov (United States)

    Alvandimanesh, Azin; Sadrjavadi, Komail; Akbari, Mona; Fattahi, Ali

    2017-12-01

    This work presents the development of the new De-Esterified Tragacanth (DET) microcapsules (MCs). Co-flow extrusion method was applied for producing the MCs; the processing parameters were optimized by the Taguchi design to obtain the smallest and the most spherical MCs. Computational Fluid Dynamic (CFD) modeling was accomplished to show the formation of droplets at different airflows, and finally, βTC3 pancreatic cells were encapsulated in the MCs. The optimum MCs had 214.58μm size and 60.75% sphericality. The air pressure and the cross-linking reaction of DET were the most influential parameter in size and the sphericality of MCs, respectively. CFD showed two velocity vortices with rotational flow formed in the chamber, which caused changing the droplet moving direction. The encapsulated cells were proliferated, and cell viability was not reduced during six days. These phenomena make DET MCs a potential candidate for the cell encapsulation. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Service Quality Robust Design by the Integration of Taguchi Experiments and SERVQUAL Approach in a Travel Agency

    Directory of Open Access Journals (Sweden)

    nassibeh janatyan

    2012-02-01

    Full Text Available The main purpose of this research is to address how robust design of service quality dimensions can be obtained. Service Quality Robust Design has been conducted by the integration of Taguchi Design of Experiments and SERVQUAL approach in Iran Travel Agency. Five basic dimensions of service quality, i.e. reliability, responsiveness, assurance, empathy, tangibles and price have been assumed as control factors. Response factor has been defined as two alternatives i the sum of customer expectations, and ii the sum of service quality gaps. In this investigation assumed that noise factor is not existed. The advantage of this paper is to improve the average and standard deviation simultaneously. Signal to noise ratio has been computed and the desired mix of the levels of service quality dimensions has been addressed. The main findings of this research includes the desired mix of the levels of service quality dimensions based on the sum of customer expectations and the desired mix of the levels of service quality dimensions based on the sum of service quality gaps. Comparing the two sets of findings helps the agency to analyze the cost of attracting new customers or retaining regular customers.

  12. Optimisation of laser welding parameters for welding of P92 material using Taguchi based grey relational analysis

    Directory of Open Access Journals (Sweden)

    Shanmugarajan B.

    2016-08-01

    Full Text Available Creep strength enhanced ferritic (CSEF steels are used in advanced power plant systems for high temperature applications. P92 (Cr–W–Mo–V steel, classified under CSEF steels, is a candidate material for piping, tubing, etc., in ultra-super critical and advanced ultra-super critical boiler applications. In the present work, laser welding process has been optimised for P92 material by using Taguchi based grey relational analysis (GRA. Bead on plate (BOP trials were carried out using a 3.5 kW diffusion cooled slab CO2 laser by varying laser power, welding speed and focal position. The optimum parameters have been derived by considering the responses such as depth of penetration, weld width and heat affected zone (HAZ width. Analysis of variance (ANOVA has been used to analyse the effect of different parameters on the responses. Based on ANOVA, laser power of 3 kW, welding speed of 1 m/min and focal plane at −4 mm have evolved as optimised set of parameters. The responses of the optimised parameters obtained using the GRA have been verified experimentally and found to closely correlate with the predicted value.

  13. Applying the Taguchi Method for Investigating the Phase-Locked Loop Dynamics Affected by Hybrid Storage System Parameters

    Directory of Open Access Journals (Sweden)

    Mostafa Ahmadzadeh

    2018-01-01

    Full Text Available Storage systems play an important role in performance of micro-grids. Storage systems may decrease fluctuations caused by periodic and unpredictable nature of distributed generation resource. Some micro-grids are connected to the network via a grid-interface converter. The phase-locked loop (PLL is a commonly technique for the grid synchronization of network-connected converters. Various parameters affect the stability of PLL (including the network-side and microgrid-side parameters. The effect of the micro-grid-side parameters on the stability of the PLL has not been studied so far. In this paper, the stability of PLL influenced by microgrid-side parameters has been evaluated after a detailed analytical modeling of micro-grid components (including the production power fluctuations, energy storage system, microgrid-side loads, controller parameters etc.. This paper proposes two new stability analysis criteria for PLL affected by micro-grid and hybrid storage system parameters. Using proposed criteria for stability of PLL, optimized rate of micro-grid and hybrid storage system parameters are obtained using statistical methods (Taguchi approach. Finally, behavior of PLL affected by hybrid storage system is investigated. The simulation results and eigenvalues analysis confirm the theoretical analysis and proposed criteria.

  14. Topographic Maps on the Territory of Croatia Editor: Stanislav Frangeš

    Directory of Open Access Journals (Sweden)

    Miljenko Lapaine

    2012-06-01

    Full Text Available Promotion of the monograph Topographic Maps on the Territory of Croatiawas organized by the Croatian Cartographic Society and held at the Croatian State Archive in Zagreb on April 18, 2012. At the beginning of the promotion, guests were welcomed by Dr. Stjepan Ćosić, Director of the Croatian State Archive. The monograph was then represented by Prof. Dr. Stanislav Frangeš, the book's editor, Prof. Dr. Miljenko Lapaine, the book's reviewer, and MSc Ivan Landek, one of the book's authors.

  15. Why do we need international standards on responsible research publication for authors and editors?

    Directory of Open Access Journals (Sweden)

    Elizabeth Wager

    2013-12-01

    Full Text Available Delivering the best possible healthcare requires a reliable evidence-base of research publications. Both authors and editors have responsibilities when publishing research yet it can be hard to find guidance on these. Most journal instructions concentrate on style and formatting but give little or no information about research and publication ethics.

  16. Extended Hu¨ckel Calculations on Solids Using the Avogadro Molecular Editor and Visualizer

    Science.gov (United States)

    Avery, Patrick; Ludoweig, Herbert; Autschbach, Jochen; Zurek, Eva

    2018-01-01

    The "Yet Another extended Hu¨ckel Molecular Orbital Package" (YAeHMOP) has been merged with the Avogadro open-source molecular editor and visualizer. It is now possible to perform YAeHMOP calculations directly from the Avogadro graphical user interface for materials that are periodic in one, two, or three dimensions, and to visualize…

  17. Modification to the Monte N-Particle (MCNP) Visual Editor (MCNPVised) to read in Computer Aided Design (CAD) files

    International Nuclear Information System (INIS)

    Schwarz, Randy A.; Carter, Leeland L.

    2004-01-01

    Monte Carlo N-Particle Transport Code (MCNP) (Reference 1) is the code of choice for doing complex neutron/photon/electron transport calculations for the nuclear industry and research institutions. The Visual Editor for Monte Carlo N-Particle (References 2 to 11) is recognized internationally as the best code for visually creating and graphically displaying input files for MCNP. The work performed in this grant enhanced the capabilities of the MCNP Visual Editor to allow it to read in a 2D Computer Aided Design (CAD) file, allowing the user to modify and view the 2D CAD file and then electronically generate a valid MCNP input geometry with a user specified axial extent

  18. Optimization of Surface Finish in Turning Operation by Considering the Machine Tool Vibration using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Muhammad Munawar

    2012-01-01

    Full Text Available Optimization of surface roughness has been one of the primary objectives in most of the machining operations. Poor control on the desired surface roughness generates non conforming parts and results into increase in cost and loss of productivity due to rework or scrap. Surface roughness value is a result of several process variables among which machine tool condition is one of the significant variables. In this study, experimentation was carried out to investigate the effect of machine tool condition on surface roughness. Variable used to represent machine tool\\'s condition was vibration amplitude. Input parameters used, besides vibration amplitude, were feed rate and insert nose radius. Cutting speed and depth of cut were kept constant. Based on Taguchi orthogonal array, a series of experimentation was designed and performed on AISI 1040 carbon steel bar at default and induced machine tool\\'s vibration amplitudes. ANOVA (Analysis of Variance, revealed that vibration amplitude and feed rate had moderate effect on the surface roughness and insert nose radius had the highest significant effect on the surface roughness. It was also found that a machine tool with low vibration amplitude produced better surface roughness. Insert with larger nose radius produced better surface roughness at low feed rate.

  19. Optimization of Surface Roughness and Wall Thickness in Dieless Incremental Forming Of Aluminum Sheet Using Taguchi

    Science.gov (United States)

    Hamedon, Zamzuri; Kuang, Shea Cheng; Jaafar, Hasnulhadi; Azhari, Azmir

    2018-03-01

    Incremental sheet forming is a versatile sheet metal forming process where a sheet metal is formed into its final shape by a series of localized deformation without a specialised die. However, it still has many shortcomings that need to be overcome such as geometric accuracy, surface roughness, formability, forming speed, and so on. This project focus on minimising the surface roughness of aluminium sheet and improving its thickness uniformity in incremental sheet forming via optimisation of wall angle, feed rate, and step size. Besides, the effect of wall angle, feed rate, and step size to the surface roughness and thickness uniformity of aluminium sheet was investigated in this project. From the results, it was observed that surface roughness and thickness uniformity were inversely varied due to the formation of surface waviness. Increase in feed rate and decrease in step size will produce a lower surface roughness, while uniform thickness reduction was obtained by reducing the wall angle and step size. By using Taguchi analysis, the optimum parameters for minimum surface roughness and uniform thickness reduction of aluminium sheet were determined. The finding of this project helps to reduce the time in optimising the surface roughness and thickness uniformity in incremental sheet forming.

  20. EDITORIAL: Message from the Editor Message from the Editor

    Science.gov (United States)

    Thomas, Paul

    2012-01-01

    Board Members, Guest Editors of special editions and those referees who were already listed in the last years. The following people have been selected: Marina Becoulet, CEA Cadarache, France Russell Doerner, University of California - San Diego, USA Emiliano Fable, Max-Planck-Institut fuer Plasmaphysik, Germany Akihide Fujisawa, Kyushi University, Japan Gerardo Giruzzi, CEA Cadarache, France Grigory Kagan, LANL, USA Morten Lennholm, CCFE, UK Akinobu Matsuyama, NIFS, Japan Peter Stangeby, University of Toronto, Canada Leonid Zakharov, PPPL, USA In addition, there is a group of several hundred referees who have helped us in the past year to maintain the high scientific standard of Nuclear Fusion. At the end of this issue we give the full list of all referees for 2011. Our thanks to them! Authors The winner of the 2011 Nuclear Fusion Award is H. Urano, for the paper 'Dimensionless parameter dependence of H-mode pedestal width using hydrogen and deuterium plasmas in JT-60U' (Nucl. Fusion 48 045008). The award was presented at the Plasma Conference 2011 (Joint meeting of 28th JSPF Annual Meeting, The 29th Symposium on Plasma Processing, and Division of Plasma Physics, 2011 Autumn Meeting of The Physical Society of Japan). This is the sixth year that the International Atomic Energy Agency (IAEA) has awarded an annual prize to honour exceptional work published in Nuclear Fusion. IOP Publishing has generously made a contribution of $2500 to the award. The Nuclear Fusion Electronic Archive The journal's electronic archive has been online since the beginning of the year. The archive has been a roaring success and has contributed to the nearly 300 000 downloads of journal papers in 2011. The archive can be accessed via http://iopscience.iop.org/0029-5515/page/Archive. It has direct links to 16 landmark papers, from authors such as Artsimovich and Mercier. The Nuclear Fusion office and IOP Publishing Just as the journal depends on the authors and referees, so its success is also

  1. P.R. Subramanian (Chief Editor). Tarkalat Tamil Maraputtotar Akarati (Tamil-Tamil-Ankilam) (Dictionary of Idioms and Phrases in Contemporary Tamil (Tamil-Tamil-English)

    OpenAIRE

    G. Murugan

    2012-01-01

    Review of P.R. Subramanian (Chief Editor). Tarkalat Tamil Maraputtotar Akarati (Tamil-Tamil-Ankilam) (Dictionary of Idioms and Phrases in Contemporary Tamil (Tamil-Tamil-English)

    Resensie van P.R. Subramanian (Chief Editor). Tarkalat Tamil Maraputtotar Akarati (Tamil-Tamil-Ankilam) (Dictionary of Idioms and Phrases in Contemporary Tamil (Tamil-Tamil-...

  2. Letter to the Editor: Chikungunya Virus Infection—An Update on Chronic Rheumatism in Latin America

    Directory of Open Access Journals (Sweden)

    Alfonso J. Rodriguez-Morales

    2017-01-01

    Full Text Available To the Editor, The article of Krutikov and Manson1 was interesting. However, no comment was made on the impact and related clinical epidemiology of the chikungunya virus (CHIKV infection during the 2014–2015 epidemics in Latin America, the most recent area affected by CHIKV. ...

  3. Educating science editors: is there a comprehensive strategy?

    Science.gov (United States)

    Gasparyan, Armen Yuri; Yessirkepov, Marlen; Gorin, Sergey V; Kitas, George D

    2014-12-01

    The article considers available options to educate science editors in the fast-transforming digital environment. There is no single course or resource that can cover their constantly changing and diversifying educational needs. The involvement in research, writing, and reviewing is important for gaining editing skills, but that is not all. Membership in editorial associations and access to updated scholarly information in the field are mandatory for maintaining editorial credentials. Learned associations offer access to a few widely-recognized periodicals. There are also formal training courses covering issues in science writing and ethical editing, but no high-level evidence data exist to promote any of these. Networking with like-minded specialists within the global and regional editorial associations seems a useful strategy to upgrade editorial skills and resolve problems with the quality control and digitization of scholarly periodicals.

  4. Andreae is New Editor of Global Biogeochemical Cycles

    Science.gov (United States)

    Andreae, Meinrat O.

    2004-10-01

    As the incoming editor of Global Biogeochemical Cycles, I would like to introduce myself and my ideas for the journal to Eos readers and to current and potential GBC authors. I've had a somewhat ``roaming'' scientific evolution, coming from ``straight'' chemistry through hard-rock geochemistry to chemical oceanography, the field in which I did my Ph.D. I taught marine chemistry at Florida State University for a number of years, and developed an interest in ocean/atmosphere interactions and atmospheric chemistry. In 1987 I took on my present job at the Max Planck Institute for Chemistry, in Mainz, Germany, and, after leaving the seacoast, my interests shifted to interactions between the terrestrial biosphere and atmosphere, including the role of vegetation fires. My present focus is on the role of biogenic aerosols and biomass smoke in regulating cloud properties and influencing climate.

  5. Effect of dielectric fluid with surfactant and graphite powder on Electrical Discharge Machining of titanium alloy using Taguchi method

    Directory of Open Access Journals (Sweden)

    Murahari Kolli

    2015-12-01

    Full Text Available In this paper, Taguchi method was employed to optimize the surfactant and graphite powder concentration in dielectric fluid for the machining of Ti-6Al-4V using Electrical Discharge Machining (EDM. The process parameters such as discharge current, surfactant concentration and powder concentration were changed to explore their effects on Material Removal Rate (MRR, Surface Roughness (SR, Tool wear rate (TWR and Recast Layer Thickness (RLT. Detailed analysis of structural features of machined surface was carried out using Scanning Electron Microscope (SEM to observe the influence of surfactant and graphite powder on the machining process. It was observed from the experimental results that the graphite powder and surfactant added dielectric fluid significantly improved the MRR, reduces the SR, TWR and RLT at various conditions. Analysis of Variance (ANOVA and F-test of experimental data values related to the important process parameters of EDM revealed that discharge current and surfactant concentration has more percentage of contribution on the MRR and TWR whereas the SR, and RLT were found to be affected greatly by the discharge current and graphite powder concentration.

  6. Optimization of Blending Parameters and Fiber Size of Kenaf-Bast-Fiber-Reinforced the Thermoplastic Polyurethane Composites by Taguchi Method

    Directory of Open Access Journals (Sweden)

    Y. A. El-Shekeil

    2013-01-01

    Full Text Available “Kenaf-fibers- (KF-” reinforced “thermoplastic polyurethane (TPU” composites were prepared by the melt-blending method followed by compression molding. Composite specimens were cut from the sheets that were prepared by compression molding. The criteria of optimization were testing the specimens by tensile test and comparing the ultimate tensile strength. The aim of this study is to optimize processing parameters (e.g., processing temperature, time, and speed and fiber size using the Taguchi approach. These four parameters were investigated in three levels each. The L9 orthogonal array was used based on the number of parameters and levels that has been selected. Furthermore, analysis of variance (ANOVA was used to determine the significance of different parameters. The results showed that the optimum values were 180°C, 50 rpm, 13 min, and 125–300 micron for processing temperature, processing speed, processing time, and fiber size, respectively. Using ANOVA, processing temperature showed the highest significance value followed by fiber size. Processing time and speed did not show any significance on the optimization of TPU/KF.

  7. Editorial first issue: Letter from the Editor

    Directory of Open Access Journals (Sweden)

    Farinaz Nasirinezhad

    2016-08-01

    Full Text Available Welcome to the first issue of Journal of Medical Physiology! Journal of Medical Physiology is a high-quality, peer reviewed, open access journal which will focus on physiology, biology, and neuroscience and their applications in clinic from the molecular levels to the levels of organs and systems.  In recent years knowledge of physiology has been under a great progress and is being taught as one of the major courses in medicine and allied fields in the universities. Many researchers are doing research in this field and try to find the basic mechanism and appropriate solution for diseases which are difficult to treat. The editorial board wants to create a balanced journal to help the researchers in the field of medicine and physiology to share the results of their research work. Like all good science, medical physiology has no national boundaries. Although we each have found our own niche where we work and feel most comfortable, science language is a common language and by this language scientist can learn from each other. We want Journal of Medical Physiology to be an international forum for sharing the best ideas. It will help researcher in the field of medicine and physiology to keep up with the science. We hope that this journal plays a major role in the development of the physiological sciences and contribute to the diffusion of scientific knowledge and to promote discussion among scientist. The journal will include original researches that are practical applications of known techniques as well as theoretical advances at the physiological sciences and medicine. I consider it a great honor being as Editor-in-Chief of Journal of Medical Physiology and I will do my best to face all challenges that confront the journal and striving to increase the quality and impact of the journal's content. Despite the inevitable push towards publishing in the highest impact factor journals possible, the other side of the coin is ensuring that your work is

  8. Funding source and conflict of interest disclosures by authors and editors in gastroenterology specialty journals revisited.

    Science.gov (United States)

    Qureshi, J; Sud, A; Vakil, N

    2012-03-01

    A survey of journals published in the field of Gastroenterology conducted 5 years ago showed marked variability in reporting of conflicts of interest or funding sources in these journals. To re-examine reporting of conflicts of interest and funding sources for original articles and editorials in Gastroenterology and Hepatology journals. We evaluated all original articles and editorials in 15 leading journals (determined by impact factor-Thomson Reuter Science Citation Index) devoted to Gastroenterology and Hepatology for disclosures of conflicts and for editor's self disclosures. We examined each journal's editorial policy by contacting the journal directly if the information was not revealed on the Web site or print versions of the journal. Of the 1574 articles evaluated, a total of 1207 (77%) reported the presence or absence of a potential conflict of interest and 1047 (67%) reported the presence or absence of funding sources. A total of 3 of the 15 (20%) journals (American Journal of Gastroenterology, Gastroenterology, and Alimentary Pharmacology and Therapeutics reported the presence or absence of funding sources in all their published original articles. Only 5 of 15 (33%) journals (Gut, Gastrointestinal Endoscopy, American Journal of Gastroenterology, Neurogastroenterology & Motility and Alimentary Pharmacology and Therapeutics) publicly disclosed the conflicts of interest of the editors. (i) Funding sources and conflicts of interest are still reported variably in the GI literature. (ii) Editorials and review articles are influential, but have poor reporting of conflicts of interest. (iii) Editors of many journals still do not report their conflicts of interest. © 2012 Blackwell Publishing Ltd.

  9. PREFACE: Introductory remarks from the Editors Introductory remarks from the Editors

    Science.gov (United States)

    Knobloch, E.; Meseguer, A.; Marques, F.

    2012-06-01

    The local organizers of the 4th BIFD (Bifurcations and Instabilities in Fluid Dynamics) Symposium held in Barcelona on 18-21 July 2011 would like to thank the editors of Fluid Dynamics Research for offering us the opportunity of publishing a peer-reviewed special issue of the journal with a selection of the contributions presented at this conference. We thank both the authors and the referees for working with us on the rather tight schedule necessary to release the issue within one year of the date of the conference. We also thank the invited speakers, B Eckhardt, L Tuckerman, and J M Vega, for contributing keynote papers to this special issue. The series of BIFD symposia started as a small workshop in Madeira, Portugal, in 2004 with no more than 20 participants. This number increased rapidly during the second and third symposia held in 2006 (Denmark) and 2009 (United Kingdom), with 40 and 110 participants, respectively. The 4th BIFD symposium has consolidated this event as one of the leading conferences in hydrodynamic stability, with nearly 200 participants from around the world. The main goal of this conference is to bring together scientists and engineers from different disciplines directly or indirectly related to fluid dynamics, bifurcation theory and hydrodynamic stability theory. The conference covered many research areas within the aforementioned fields, ranging from thermal, shear and centrifugal flows to biofluids, films, drops, viscoelastic flows and magnetohydrodynamics. The structure of the conference, with invited plenary talks and focused sessions, helped the participants find their home in the conference and share state-of-the-art knowledge within the field of hydrodynamic instabilities. The financial support from MICINN (Spanish Ministry of Science and Innovation, Grant no FIS2009-08065-E) and UPC (Universitat Politècnica de Catalunya) is greatly appreciated. The local organizers would also like to thank ETSAB (Barcelona School of Architecture

  10. Comparative study of coated and uncoated tool inserts with dry machining of EN47 steel using Taguchi L9 optimization technique

    Science.gov (United States)

    Vasu, M.; Shivananda, Nayaka H.

    2018-04-01

    EN47 steel samples are machined on a self-centered lathe using Chemical Vapor Deposition of coated TiCN/Al2O3/TiN and uncoated tungsten carbide tool inserts, with nose radius 0.8mm. Results are compared with each other and optimized using statistical tool. Input (cutting) parameters that are considered in this work are feed rate (f), cutting speed (Vc), and depth of cut (ap), the optimization criteria are based on the Taguchi (L9) orthogonal array. ANOVA method is adopted to evaluate the statistical significance and also percentage contribution for each model. Multiple response characteristics namely cutting force (Fz), tool tip temperature (T) and surface roughness (Ra) are evaluated. The results discovered that coated tool insert (TiCN/Al2O3/TiN) exhibits 1.27 and 1.29 times better than the uncoated tool insert for tool tip temperature and surface roughness respectively. A slight increase in cutting force was observed for coated tools.

  11. Data Sharing: A New Editorial Initiative of the International Committee of Medical Journal Editors. Implications for the Editors’ Network

    Directory of Open Access Journals (Sweden)

    Fernando Alfonso, MD

    2017-05-01

    Full Text Available The International Committee of Medical Journal Editors (ICMJE provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical aspects of the scientific process. Recently, registration of clinical trials, conflicts of interest disclosure, and new criteria for authorship -emphasizing the importance of responsibility and accountability-, have been proposed. Last year, a new editorial initiative to foster sharing of clinical trial data was launched. This review discusses this novel initiative with the aim of increasing awareness among readers, investigators, authors and editors belonging to the Editors’ Network of the European Society of Cardiology.

  12. Data sharing: A new editorial initiative of the International Committee of Medical Journal Editors. Implications for the editors’ network

    Directory of Open Access Journals (Sweden)

    Fernando Alfonso

    2017-06-01

    Full Text Available The International Committee of Medical Journal Editors (ICMJE provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical aspects of the scientific process. Recently, registration of clinical trials, conflicts of interest disclosure, and new criteria for authorship -emphasizing the importance of responsibility and accountability-, have been proposed. Last year, a new editorial initiative to foster sharing of clinical trial data was launched. This review discusses this novel initiative with the aim of increasing awareness among readers, investigators, authors and editors belonging to the Editors’ Network of the European Society of Cardiology.

  13. The roles of the AAS Journals' Data Editors

    Science.gov (United States)

    Muench, August; NASA/SAO ADS, CERN/Zenodo.org, Harvard/CfA Wolbach Library

    2018-01-01

    I will summarize the community services provided by the AAS Journals' Data Editors to support authors’ when citing and preserving the software and data used in the published literature. In addition I will describe the life of a piece of code as it passes through the current workflows for software citation in astronomy. Using this “lifecycle” I will detail the ongoing work funded by a grant from the Alfred P. Sloan Foundation to the American Astronomical Society to improve the citation of software in the literature. The funded development team and advisory boards, made up of non-profit publishers, literature indexers, and preservation archives, is implementing the Force11 Software citation principles for astronomy Journals. The outcome of this work will be new workflows for authors and developers that fit in their current practices while enabling versioned citation of software and granular credit for its creators.

  14. Letter to the editor: Pre-exposure prophylaxis for HIV in Europe: The need for resistance surveillance

    NARCIS (Netherlands)

    C. Van Tienen (Carla); D.A.M.C. van de Vijver (David); T. Noori (Teymur); A. Sonnerborg (Anders); C.A.B. Boucher (Charles)

    2017-01-01

    markdownabstract__To the editor:__ In a recent paper by Hauser et al. in this journal, a prevalence of 10.8% of transmitted drugresistant viruses was reported among newly diagnosed HIV cases in Germany in 2013 and 2014. The authors conclude that genotypic resistance testing remains important for

  15. Editor's preface

    International Nuclear Information System (INIS)

    Greiner, W.

    2001-01-01

    -energy heavy ion collisions. This symposium was meant as a token of appreciation for his life, his work and his personality by his friends and colleagues. Mike certainly would have enjoyed the fine talks, the lively discussions, the excursion to the Oelberg, and the hospitable setting at the DPG conference center. My special thanks go to the Wilhelm und Else Heraeus Stiftung for its generous support, which made this symposium possible. I want to express my gratitude to Johann Rafelski, Tucson, for his advice. Thanks are also due to Mathias Brandstetter for his assistance in organizing the conference and to Joachim Reinhardt for his help in preparing the proceedings. Finally, I acknowledge the agreeable collaboration with Istvan Lovas, editor-in-chief of Heavy Ion Physics. (author)

  16. Sharing Clinical Trial Data – A Proposal from the International Committee of Medical Journal Editors

    Directory of Open Access Journals (Sweden)

    Darren B. Taichman

    2016-06-01

    Full Text Available El Comité Internacional de Editores de Revistas Mé-dicas (ICMJE, por sus siglas en inglés considera que es una obligación ética compartir, de forma respon- sable, los datos generados por los ensayos clínicos, porque los participantes se han puesto en riesgo para ello.

  17. [Letters to the editor published in Peruvian biomedical journals indexed in SciELO-Peru 2006-2013].

    Science.gov (United States)

    Montenegro-Idrogo, Juan José; Mejía-Dolores, Jhon William; Chalco-Huamán, Joel L

    2015-01-01

    This bibliometric study describes the characteristics of letters to the editor published between 2006-2013 in biomedical journals indexed in SciELO-Peru.253 letters (10.3% of total publications) were collected. Most letters (139) were in the Peruvian Journal of Experimental Medicine and Public Health, with marked increase throughout those years. 25% of letters submitted included medical student participation. 14% of authors presented with international affiliations and 27% with endogenous affiliation - common in university journals (Anales de la Facultad de Medicina, Revista Médica Herediana).The usual criteria justifying the publication of letters were: opinion of medical fact or public domain (35.6%) and discussion of results, methodological flaws or interpretation (22.9%). In biomedical journals indexed in SciELO Peru the letters to the editor comprise a percentage of publications that has increased in recent years, with low publication of letters of findings or primary data, compared with opinion or criticism.

  18. Thirty-two years of Acta Neophilologica - with gratitude to its founder and editor Professor Janez Stanonik

    Directory of Open Access Journals (Sweden)

    Mirko Jurak

    2000-12-01

    Full Text Available In spring this year Professor Janez Stanonik decided to retire as the Editor of the scholarly journal Acta Neophilologica, which he founded in 1968 and edited for thirty-two years. I endeavoured to help him with the material side of the journal from the very beginning until1995; since then this task has been performed by the present Associate Editor. At the time when Janez Stanonik began publishing this journal, his main aim was to make our research work in Western European and American literature better known to scholars all over the world. However, in a few years' time the journal also became open to scholars from other countries and other fields, particularly in areas connected with Slovene literature and culture, Slovene immigrant literature, and linguistics. I believe that this approach gave the journal a new openness and that it enriched its quality, therefore I intend to follow this policy in the future too.

  19. Towards Concept Transformation and Function Innovation of Editors in Omni Media

    Institute of Scientific and Technical Information of China (English)

    Liu Si-wen; Liu Ying

    2014-01-01

    Along with the integration of three big Nets of telecom,broadcast and internet,the traditional publish environment has undergone changes. Faced with various new publishing forms,the editors,the centre of publishing activity,should get released from the traditional one-way mode as the“text gatekeeper”and“flatten preprocessor”,take the advantage of opportunities to transform concepts and innovate function. They should turn to“amphibious”road by information interaction development and social marketing, try to avoid“Opinion Leader”,“gear up”the editing platform as well as achieve“long tail”effect of editing products,so as to better serve the mass publishing.

  20. Neutralization of red mud with pickling waste liquor using Taguchi's design of experimental methodology.

    Science.gov (United States)

    Rai, Suchita; Wasewar, Kailas L; Lataye, Dilip H; Mishra, Rajshekhar S; Puttewar, Suresh P; Chaddha, Mukesh J; Mahindiran, P; Mukhopadhyay, Jyoti

    2012-09-01

    'Red mud' or 'bauxite residue', a waste generated from alumina refinery is highly alkaline in nature with a pH of 10.5-12.5. Red mud poses serious environmental problems such as alkali seepage in ground water and alkaline dust generation. One of the options to make red mud less hazardous and environmentally benign is its neutralization with acid or an acidic waste. Hence, in the present study, neutralization of alkaline red mud was carried out using a highly acidic waste (pickling waste liquor). Pickling waste liquor is a mixture of strong acids used for descaling or cleaning the surfaces in steel making industry. The aim of the study was to look into the feasibility of neutralization process of the two wastes using Taguchi's design of experimental methodology. This would make both the wastes less hazardous and safe for disposal. The effect of slurry solids, volume of pickling liquor, stirring time and temperature on the neutralization process were investigated. The analysis of variance (ANOVA) shows that the volume of the pickling liquor is the most significant parameter followed by quantity of red mud with 69.18% and 18.48% contribution each respectively. Under the optimized parameters, pH value of 7 can be achieved by mixing the two wastes. About 25-30% of the total soda from the red mud is being neutralized and alkalinity is getting reduced by 80-85%. Mineralogy and morphology of the neutralized red mud have also been studied. The data presented will be useful in view of environmental concern of red mud disposal.

  1. From the Editor

    Directory of Open Access Journals (Sweden)

    Željko Hutinski

    2012-07-01

    Full Text Available All the papers in this issue of the JIOS Journal may fit into the Science as Usual categoryand are therefore not going to be dealt with in detail in the introduction. However, for oneof the papers included an exception has been provided, namely the paper Sigma-notationand the equivalence of P and NP classes by Miron Ivanovich Telpiz. The circumstancesleading to its publication in this issue of JIOS are presented by the editors in this preface.It is generally acknowledged that, ever since it was defined by S. Cook over thirty yearsago, P = NP has presented one of the major open problems in computing science andinformation science in general. Whereas, on one hand, this problem presents a formidablechallenge to any scientist dealing with it, its solution, especially in case it should turn out tobe a positive one considering that current technology tends to evolve in a practicaldirection and its overall functioning is conducted implicitly under the assumption of anegative solution would have a major impact on the development of informationtechnology as well as the wider context of human society as a whole. Apart from being putforward in conferences, both positive and negative “solutions” to P = NP problem can beoccasionally found in press, scientific and professional journals. The web page titled “Pversus-NP Page” (see http://www.win.tue.nl/~gwoegi/P-versus-NP.htm provides anexcellent source for this issue. It contains links to papers stating that P = NP, as well asthose contradicting the opposite, i.e., stating that P NP. Furthermore, references are givento Oded Goldreich's rationale behind his decision not to review papers proposing solutionsto P = NP problem and related difficult problems because, in his own words, they “alsoattract the attention of non-experts, and one annoying consequence is a flood of falseclaims of resolutions of these problems” (see http://www.wisdom.weizmann.ac.il/~oded/faq.html. Dr. Goldreich a recognised

  2. CorSalud, The New England Journal of Medicine, and the International Committee of Medical Journal Editors

    Directory of Open Access Journals (Sweden)

    Francisco L. Moreno-Martínez

    2016-06-01

    Full Text Available CorSalud y The New England Journal of Medicine (NEJM coincidieron por primera vez en el título de una carta al editor en 20121, en esa ocasión fue para felicitar a tan prestigiosa revista por el bicentenario de su creación.

  3. 2-[(Hydroxymethyl)amino]ethanol in water as a preservative: Study of formaldehyde released by Taguchi's method

    Science.gov (United States)

    Wisessirikul, W.; Loykulnant, S.; Montha, S.; Fhulua, T.; Prapainainar, P.

    2016-06-01

    This research studied the quantity of free formaldehyde released from 2- [(hydroxymethyl)amino]ethanol (HAE) in DI water and natural rubber latex mixture using high-performance liquid chromatography (HPLC) technique. The quantity of formaldehyde retained in the solution was cross-checked by using titration technique. The investigated factors were the concentration of preservative (HAE), pH, and temperature. Taguchi's method was used to design the experiments. The number of experiments was reduced to 16 experiments from all possible experiments by orthogonal arrays (3 factors and 4 levels in each factor). Minitab program was used as a tool for statistical calculation and for finding the suitable condition for the preservative system. HPLC studies showed that higher temperature and higher concentration of the preservative influence the amount of formaldehyde released. It was found that conditions at which formaldehyde was released in the lowest amount were 1.6%w/v HAE, 4 to 40 °C, and the original pH. Nevertheless, the pH value of NR latex should be more than 10 (the suitable pH value was found to be 13). This preservative can be used to replace current preservative systems and can maintain the quality of latex for long-term storage. Use of the proposed preservative system was also shown to have reduced impact on the toxicity of the environment.

  4. From Editor

    Directory of Open Access Journals (Sweden)

    Ugur Demiray

    2009-01-01

    Full Text Available TOJDE is appeared on your screen now as Volume 10, Number: 1. This is the first issue of the year 2009 and 10th anniversary of TOJDE. In this issue it is published four article are in “Notes for Editor Sectio”, 13 articles, 2 reviews. And this time, 26 authors from twelwe different countries are placed. These published articles are from Australia, Botswana, Canada, Italy India, Jordan, Malaysia, Nigeria, Srilanka, USA and Turkey. “Service Learning In Distance Education: Foreign Language Learning Environments” has sent to editor of TOJDE from Turkey and written by Muhlise Coşgun OGEYIK from Trakya University, Faculty of Education Edirne, TURKEY and Emre GUVENDIR from University of California. Their paper provides an overview in general education, in particular foreign language education, can be acknowledged as a lifelong learning process which can be transformed beyond the borders in global sense. Learning a foreign language requires proficiency in four basic skills which are reading, writing, speaking, and listening. Of these skills, speaking and listening are the most daunting tasks for learners and create obstacles when learners of target language do not get the chance of meeting native speakers. Such obstacles can be overwhelmed by integrating certain applications into education process. Service-learning through the internet as a teaching method can be considered one of the most striking one of those applications for foreign language learners. Paper focuses on the benefits of service-learning are discussed and some suggestions are offered for introducing this method in foreign language settings. The second notes for editor is titled as Students’ Opinions On Blended Learning which is written by Meric BALCI and Haluk SORAN from Hacettepe University, Education Faculty, Ankara,Turkey. They mentioned that E-learning was acknowledged by most educators and researchers as a savior, even an only alternative in education field, especially in

  5. Analysis of the Forces in Micromilling of Hardened AISI H13 Steel with Different Grain Sizes Using the Taguchi Methodology

    Directory of Open Access Journals (Sweden)

    Carlos Henrique Lauro

    2014-05-01

    Full Text Available The micromachining process has been applied to the free form and micromolds markets. This has occurred due to the growth in demand for microcomponents. However, micromachining of hardened steels is a challenge due to the reduction in tool life and the increase of the surface roughness when compared with the macromachining process. This paper focused on the analysis of micromilling forces on hardened AISI H13 steel with different grain sizes. Experimental tests were carried out on workpieces with different austenitic grain sizes and a hardness of 46 HRC. Micro-end-mill cutters with a diameter of 0.5 mm and (TiAlN coatings were applied in the milling of workpieces of 11 × 11 mm. The input parameters were two radial depths of cut, two cutting speeds, and two feed rates. The influence of the input parameters on the response cutting force was analyzed using the Taguchi method. Finally, considering the large grain size, the cutting forces in the x-, y-, and z-axes direction were small.

  6. Thermal design, rating and second law analysis of shell and tube condensers based on Taguchi optimization for waste heat recovery based thermal desalination plants

    Science.gov (United States)

    Chandrakanth, Balaji; Venkatesan, G; Prakash Kumar, L. S. S; Jalihal, Purnima; Iniyan, S

    2018-03-01

    The present work discusses the design and selection of a shell and tube condenser used in Low Temperature Thermal Desalination (LTTD). To optimize the key geometrical and process parameters of the condenser with multiple parameters and levels, a design of an experiment approach using Taguchi method was chosen. An orthogonal array (OA) of 25 designs was selected for this study. The condenser was designed, analysed using HTRI software and the heat transfer area with respective tube side pressure drop were computed using the same, as these two objective functions determine the capital and running cost of the condenser. There was a complex trade off between the heat transfer area and pressure drop in the analysis, however second law analysis was worked out for determining the optimal heat transfer area vs pressure drop for condensing the required heat load.

  7. From Editor

    Directory of Open Access Journals (Sweden)

    Ugur DEMIRAY

    2012-07-01

    Full Text Available Turkish Online Journal of Distance Education-TOJDE July 2012 ISSN 1302-6488 Volume: 13 Number: 3 from EditorDear TOJDE Readers,Welcome to the Volume 13 Number: 3 of TOJDE! In this issue, 2 Notes for Editor and 26 articles of 51 authors from 14 different countries around the world have been published. These published articles are from, Algeria, Australia, Bengaldesh, Greece, India, Iran, Malaysia, Mariutius, Nigeria, Oman, Spain, Turkey, USA and Zimbabwe.First all, you should know that if a submission picks up from 3 TOJDE editors between 4.5 and 9 over all 9 credits, it means that this submission can be published in TOJDE in the coming issues. However, since the publishing priority of the accepted papers belongs to the highest scored ones, submissions which receive a score between 4.5 and 5 or 6 should wait and be archived for publishing later on. TOJDE administration respected this publishing rule up to now. Therefore, some accepted submissions which obtained over 4.5 have not been published yet up to now. These submissions were waiting for publishing in TOJDE in the future. In this issue, we decided to give them a chance to be published. For this reason, the current issue includes more papers than the previous issues. The 1st Notes for editor arrived from USA and written by Steve McCREA on Transforming Teachers, Transforming Schools: Turning "Sages" Into "Guides on The Side". He mentioned that teachers, educational managers and learners must realize that new opportunities are offered by modern communication. When a teacher becomes a "guide on the side," there is a change in the school's culture that can be measured. This presentation is extracted from a newly published book, Let's Lecture Less, edited by Steve McCrea (Visualandactive.com and Mario Joel Llorente Leyva. The 2nd notes for editor is titled as “Challenges Encountered By A Distance Learning Organisation” which is written by Dr. Sangeeta MALIK, from Education, Humanities and

  8. THE USING OF GRAPHICAL EDITOR IN THE ENGINEERING GRAPHICS AND THE COURSE DESIGNING

    Directory of Open Access Journals (Sweden)

    KARPYUK L. V.

    2016-08-01

    Full Text Available The problems of learning students of the engineering and computer graphics of the course on the base of computer-aided design (CAD were described in the article. The examples of training tasks for acquiring knowledge of work in the environment of graphical editor of AutoCAD were shown. These examples are needed to perform drawings on The Engineering Graphics, and also for a graphic part of Course Projects for students of mechanical specialties.

  9. Model development for mechanical properties and weld quality class of friction stir welding using multi-objective Taguchi method and response surface methodology

    Energy Technology Data Exchange (ETDEWEB)

    Mohamed, Mohamed Ackiel [University Kuala Lumpur Malaysia France Institute, Bandar Baru Bangi (Malaysia); Manurung, Yupiter HP; Berhan, Mohamed Nor [Universiti Teknologi MARA, Shah Alam (Malaysia)

    2015-06-15

    This study presents the effect of the governing parameters in friction stir welding (FSW) on the mechanical properties and weld quality of a 6mm thick 6061 T651 Aluminum alloy butt joint. The main FSW parameters, the rotational and traverse speed were optimized based on multiple mechanical properties and quality features, which focus on the tensile strength, hardness and the weld quality class using the multi-objective Taguchi method (MTM). Multi signal to noise ratio (MSNR) was employed to determine the optimum welding parameters for MTM while further analysis concerning the significant level determination was accomplished via the well-established analysis of variance (ANOVA). Furthermore, the first order model for predicting the mechanical properties and weld quality class is derived by applying response surface methodology (RSM). Based on the experimental confirmation test, the proposed method can effectively estimate the mechanical properties and weld quality class which can be used to enhance the welding performance in FSW or other applications.

  10. Model development for mechanical properties and weld quality class of friction stir welding using multi-objective Taguchi method and response surface methodology

    International Nuclear Information System (INIS)

    Mohamed, Mohamed Ackiel; Manurung, Yupiter HP; Berhan, Mohamed Nor

    2015-01-01

    This study presents the effect of the governing parameters in friction stir welding (FSW) on the mechanical properties and weld quality of a 6mm thick 6061 T651 Aluminum alloy butt joint. The main FSW parameters, the rotational and traverse speed were optimized based on multiple mechanical properties and quality features, which focus on the tensile strength, hardness and the weld quality class using the multi-objective Taguchi method (MTM). Multi signal to noise ratio (MSNR) was employed to determine the optimum welding parameters for MTM while further analysis concerning the significant level determination was accomplished via the well-established analysis of variance (ANOVA). Furthermore, the first order model for predicting the mechanical properties and weld quality class is derived by applying response surface methodology (RSM). Based on the experimental confirmation test, the proposed method can effectively estimate the mechanical properties and weld quality class which can be used to enhance the welding performance in FSW or other applications.

  11. Application of the Taguchi Method for Optimizing the Process Parameters of Producing Lightweight Aggregates by Incorporating Tile Grinding Sludge with Reservoir Sediments.

    Science.gov (United States)

    Chen, How-Ji; Chang, Sheng-Nan; Tang, Chao-Wei

    2017-11-10

    This study aimed to apply the Taguchi optimization technique to determine the process conditions for producing synthetic lightweight aggregate (LWA) by incorporating tile grinding sludge powder with reservoir sediments. An orthogonal array L 16 (4⁵) was adopted, which consisted of five controllable four-level factors (i.e., sludge content, preheat temperature, preheat time, sintering temperature, and sintering time). Moreover, the analysis of variance method was used to explore the effects of the experimental factors on the particle density, water absorption, bloating ratio, and loss on ignition of the produced LWA. Overall, the produced aggregates had particle densities ranging from 0.43 to 2.1 g/cm³ and water absorption ranging from 0.6% to 13.4%. These values are comparable to the requirements for ordinary and high-performance LWAs. The results indicated that it is considerably feasible to produce high-performance LWA by incorporating tile grinding sludge with reservoir sediments.

  12. The Effects of Reaction Variables on Solution Polymerization of Vinyl Acetate and Molecular Weight of Poly(vinyl alcohol Using Taguchi Experimental Design

    Directory of Open Access Journals (Sweden)

    M.H. Navarchian

    2009-12-01

    Full Text Available Poly(vinyl acetate is synthesized via solution polymerization, and then it is converted to poly(vinyl alcohol by alkaline alcoholysis. The aim of the work study was to investigate statistically the  influence of reaction variables in vinyl acetate polymerization, the conversion of this monomer to polymer, degree of branching of acetyl group in poly(vinyl acetate, as well as the molecular weight of poly(vinyl alcohol, using Taguchi experimental design approach. The reaction variables were polymerization time, molar ratio of initiator to monomer, and volume ratio of monomer to solvent. The statistical analysis of variance of the results revealed that all factors have significantly influenced the conversion and degree of branching. Volume ratio of monomer to solvent is the only factor affecting the molecular weight of poly(vinyl alcohol, and has the greatest influence on all responses. By increasing this ratio, the conversion, degree of branching of acetyl group in poly(vinyl acetate, and molecular weight of poly(vinyl alcohol were increased.

  13. Reviewing for "Beyond Behavior": An Editor's Guide for Submitting a Comprehensive and Meaningful Review

    Science.gov (United States)

    Mooney, Paul; Ryan, Joseph B.

    2018-01-01

    Reviewing manuscripts is an integral part of the publication process. Unfortunately, few scholars receive training in this skill. This article provides an overview of what it takes to conduct a quality review of a manuscript submission for a practitioner journal. The editors describe the manuscript types published by "Beyond Behavior"…

  14. The fabulous fours! annual report from the editor

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2015-01-01

    Full Text Available No abstract available. Article truncated after 150 words. With the end of 2014, the Southwest Journal of Pulmonary and Critical Care (SWJPCC completed its fourth year of operation. Our first manuscript was posted on November 11, 2010. We posted 8 manuscripts our first year, 68 in 2011, 113 in 2012 and 164 in 2013 and 167 in 2014 (Table 1. Accompanying our increase in manuscripts, our readership continues to steadily grow, although comparisons to previous years is difficult because the methodology changed in February, 2014 (Table 2. SWJPCC continue to evolve and we made some changes in 2014: The California Thoracic Society partnered with SWJPCC; We added additional associate editors in pulmonary, critical care and imaging from Fresno (Peterson, Albuquerque (Boivin and Tucson (Arteaga. Many need to be thanked. First, thanks to our authors. Second, SWJPCC, like all journals, relies upon expert reviewers in order to publish the highest quality manuscripts. We thank the reviewers for their time ...

  15. Advanced software development workstation. Engineering scripting language graphical editor: DRAFT design document

    Science.gov (United States)

    1991-01-01

    The Engineering Scripting Language (ESL) is a language designed to allow nonprogramming users to write Higher Order Language (HOL) programs by drawing directed graphs to represent the program and having the system generate the corresponding program in HOL. The ESL system supports user generation of HOL programs through the manipulation of directed graphs. The components of this graphs (nodes, ports, and connectors) are objects each of which has its own properties and property values. The purpose of the ESL graphical editor is to allow the user to create or edit graph objects which represent programs.

  16. Endorsement of the CONSORT statement by Chinese journals of Traditional Chinese Medicine: a survey of journal editors and review of journals' instructions for authors.

    Science.gov (United States)

    Ma, Bin; Ke, Fa-Yong; Zheng, Er-Liang; Yang, Zun-Xian; Tang, Qing-Nan; Qi, Guo-Qing

    2016-06-01

    We aimed to assess the endorsement of the Consolidation Standards of Reporting Trials (CONSORT) statement by Chinese journals of Traditional Chinese Medicine (TCM) and its incorporation into their editorial processes. PubMed, Embase and major Chinese databases were searched to identify journals of TCM from China for inclusion. The latest 'instruction for authors' (IFA) of each included journal was obtained and any text mentioning CONSORT or CONSORT extension papers was extracted. Subsequently, the editor of each of the included journals was surveyed about their journal's endorsement of the CONSORT recommendations and their incorporation into editorial and peer review processes. Sixty-three journals of TCM from China were examined. Of these, only three (5%) and one (2%) of the 63 journals mentioned the CONSORT statement and extension papers, respectively, in their IFA. Fifty-four of 63 (86%) of surveyed journals responded, with the majority of respondents being editors. Only 20% (11/54) of the respondents reported that they had any knowledge of the CONSORT statement. Only 6% (3/54) of the editors reported that they required authors to comply with the CONSORT statement or that they incorporated it into their peer review and editorial processes. TCM journals in China endorsing the CONSORT statement constituted a small percentage of the total. The majority of editors surveyed were not familiar with the content of the CONSORT statement and extension papers. We strongly recommend that the China Periodicals Association issue a policy to promote the endorsement of the CONSORT statement and conduct relevant training for journal editors in China. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  17. Editors View the Continuous Publication Model as a Satisfactory Alternative for Open Access LIS Journals

    Directory of Open Access Journals (Sweden)

    Richard Hayman

    2014-09-01

    Full Text Available A Review of: Cirasella, J., & Bowdoin, S. (2013. Just roll with it? Rolling volumes vs. discrete issues in open access library and information science journals. Journal of Librarianship and Scholarly Communication, 1(4. http://dx.doi.org/10.7710/2162-3309.1086 Abstract Objective – To understand the prevalence of, motivations for, and satisfaction with using a rolling-volume publishing model, as opposed to publishing discrete issues, across open access academic journals in library and information science. Design – A 12 question survey questionnaire. Setting – English-language, open access library and information science (LIS journals published in the United States of America. Subjects – A total of 21 open access LIS journals identified via the Directory of Open Access Journals that were actively publishing, and that also met the authors’ standard of scholarliness, which they established by identifying a journal’s peer-review process or other evidence of rigorous review. Based on responses, 12 journals published using discrete issues, while 9 published as rolling volumes or as rolling volumes with some discrete issues. Methods – In late 2011, the study’s authors invited lead editors or primary journal contacts to complete the survey. Survey participants were asked to identify whether their journal published in discrete issues, rolling volumes, or rolling volumes with occasional discrete issues, with the latter two categories combined as one for ease of results analysis. Survey logic split respondents into two groups, either discrete-issue or rolling-volume. Respondents in both categories were posed similar sets of questions, with the key difference being that the questions directed at each category accounted for the publication model the journals themselves identified as using. Editors from both groups were asked about the reasons for using the publication model they identified for their journal: within the survey tool, authors

  18. EDITOR: A programme for editing BCD data on magnetic tape in the format of the U.K.A.E.A. Nuclear Data Library

    International Nuclear Information System (INIS)

    Pope, A.L.

    1965-05-01

    This paper describes the programme EDITOR and gives operating instructions. EDITOR is written in the S2 FORTRAN dialect for the IBM 7030 computer. Its purpose is to prepare data library tapes for the U.K.A.E.A. nuclear data library by copying prescribed data files in BCD from one or more input data tapes, or from card decks, on to a single output tape. The first version of the programme was designed by D. Sams at A.W.R.E. Aldermaston; a number of improvements have been incorporated into the current version. (author)

  19. An international survey and modified Delphi process revealed editors’ perceptions, training needs, and ratings of competency-related statements for the development of core competencies for scientific editors of biomedical journals

    Science.gov (United States)

    Galipeau, James; Cobey, Kelly D.; Barbour, Virginia; Baskin, Patricia; Bell-Syer, Sally; Deeks, Jonathan; Garner, Paul; Shamseer, Larissa; Sharon, Straus; Tugwell, Peter; Winker, Margaret; Moher, David

    2017-01-01

    Background: Scientific editors (i.e., those who make decisions on the content and policies of a journal) have a central role in the editorial process at biomedical journals. However, very little is known about the training needs of these editors or what competencies are required to perform effectively in this role. Methods: We conducted a survey of perceptions and training needs among scientific editors from major editorial organizations around the world, followed by a modified Delphi process in which we invited the same scientific editors to rate the importance of competency-related statements obtained from a previous scoping review. Results: A total of 148 participants completed the survey of perceptions and training needs. At least 80% of participants agreed on six of the 38 skill and expertise-related statements presented to them as being important or very important to their role as scientific editors. At least 80% agreed on three of the 38 statements as necessary skills they perceived themselves as possessing (well or very well).  The top five items on participants’ list of top training needs were training in statistics, research methods, publication ethics, recruiting and dealing with peer reviewers, and indexing of journals. The three rounds of the Delphi were completed by 83, 83, and 73 participants, respectively, which ultimately produced a list of 23 “highly rated” competency-related statements and another 86 “included” items. Conclusion: Both the survey and the modified Delphi process will be critical for understanding knowledge and training gaps among scientific editors when designing curriculum around core competencies in the future. PMID:28979768

  20. From the Editor Vol: 6 number 2

    Directory of Open Access Journals (Sweden)

    Ugur Demiray

    2005-04-01

    Full Text Available From the Editor Dear TOJDE’S Readers Time flies. Another quarter has begun. It is a great pleasure to welcome you to the 18th issue, the Volume: 6, Number: 2 of The Turkish Online Journal of Distance Education (TOJDE, of looking forward. TOJDE has been driving and shaping by our editorial board, reviewers, authors and even unbelievable readers. In the April 2005 issue, TOJDE publishes peer-reviewed distance education articles under four umbrellas: applications, feature topics, researches, and support systems. In addition, it publishes short and non-peer-reviewed book reviews and editorial letters. The main goal of TOJDE is to provide you with exclusive resources with the highest quality, and also to reach diverse audiences, as highly qualified individuals and researchers, around the world. Also, I am excited about that TOJDE is referenced as a course material by diverse institutions from the globe and very proud to share this news with you. You can see details in the news section. In this issue, it has been given place to two notes for editor submissions, eleven articles, two book reviews, 8 news, one journal about information and communication technology and one institution about technology integration via distance education named as RETA. And also interesting links deal with TOJDE take place in the literature. This issue's articles came from Canada, India, Malaysia, Nigeria, Turkey, United Kingdom and United States (according to alphabetical order. The first “Notes for Editors” is from Turkey on Using of Marketing Communication for Distance Education Institutions submitted by Dr. R. Ayhan YILMAZ, Anadolu University, Communication Sciences Faculty, Eskisehir, TURKEY. And second one arrived from India. It is titled as “Information and Communication Technology for Poverty Reduction” written by Motilal SHARMA. The first article came from Canada. It is entitled as “Understanding PISA” written by Dr. Stephen DOWNES. He mentions in his paper