WorldWideScience

Sample records for edc-37 deflagration rates

  1. Modeling deflagration waves out of hot spots

    Science.gov (United States)

    Partom, Yehuda

    2017-01-01

    It is widely accepted that shock initiation and detonation of heterogeneous explosives comes about by a two-step process known as ignition and growth. In the first step a shock sweeping through an explosive cell (control volume) creates hot spots that become ignition sites. In the second step, deflagration waves (or burn waves) propagate out of those hot spots and transform the reactant in the cell into reaction products. The macroscopic (or average) reaction rate of the reactant in the cell depends on the speed of those deflagration waves and on the average distance between neighboring hot spots. Here we simulate the propagation of deflagration waves out of hot spots on the mesoscale in axial symmetry using a 2D hydrocode, to which we add heat conduction and bulk reaction. The propagation speed of the deflagration waves may depend on both pressure and temperature. It depends on pressure for quasistatic loading near ambient temperature, and on temperature at high temperatures resulting from shock loading. From the simulation we obtain deflagration fronts emanating out of the hot spots. For 8 to 13 GPa shocks, the emanating fronts propagate as deflagration waves to consume the explosive between hot spots. For higher shock levels deflagration waves may interact with the sweeping shock to become detonation waves on the mesoscale. From the simulation results we extract average deflagration wave speeds.

  2. Deflagration Wave Profiles

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Laboratory

    2012-04-03

    Shock initiation in a plastic-bonded explosives (PBX) is due to hot spots. Current reactive burn models are based, at least heuristically, on the ignition and growth concept. The ignition phase occurs when a small localized region of high temperature (or hot spot) burns on a fast time scale. This is followed by a growth phase in which a reactive front spreads out from the hot spot. Propagating reactive fronts are deflagration waves. A key question is the deflagration speed in a PBX compressed and heated by a shock wave that generated the hot spot. Here, the ODEs for a steady deflagration wave profile in a compressible fluid are derived, along with the needed thermodynamic quantities of realistic equations of state corresponding to the reactants and products of a PBX. The properties of the wave profile equations are analyzed and an algorithm is derived for computing the deflagration speed. As an illustrative example, the algorithm is applied to compute the deflagration speed in shock compressed PBX 9501 as a function of shock pressure. The calculated deflagration speed, even at the CJ pressure, is low compared to the detonation speed. The implication of this are briefly discussed.

  3. Prospects for deflagration guns

    International Nuclear Information System (INIS)

    Cheng, D.Y.; Tripathi, P.P.; Chang, C.N.

    1978-01-01

    Deflagration is a process of fluid expansion with energy addition. Its existence in plasma physics was first discovered in the back-strapped T-tube experiments. In the coaxial plasma gun configuration the operation can be simple and yet produce a clean, high density (5 x 10 15 cm -3 ), and high kinetic energy (10 to 50 keV) collimated plasma beam. Plasma acceleration mechanism was thought to be driven by J x B force. Tapered electrodes have been used to obtain plasma beams. Scaling of the gun can be performed according to simple theory based on momentum and energy balance. Proposed plasma fueling and injection to magnetic fusion systems will be discussed

  4. Turbulent deflagrations, autoignitions, and detonations

    KAUST Repository

    Bradley, Derek

    2012-09-01

    Measurements of turbulent burning velocities in fan-stirred explosion bombs show an initial linear increase with the fan speed and RMS turbulent velocity. The line then bends over to form a plateau of high values around the maximum attainable burning velocity. A further increase in fan speed leads to the eventual complete quenching of the flame due to increasing localised extinctions because of the flame stretch rate. The greater the Markstein number, the more readily does flame quenching occur. Flame propagation along a duct closed at one end, with and without baffles to increase the turbulence, is subjected to a one-dimensional analysis. The flame, initiated at the closed end of the long duct, accelerates by the turbulent feedback mechanism, creating a shock wave ahead of it, until the maximum turbulent burning velocity for the mixture is attained. With the confining walls, the mixture is compressed between the flame and the shock plane up to the point where it might autoignite. This can be followed by a deflagration to detonation transition. The maximum shock intensity occurs with the maximum attainable turbulent burning velocity, and this defines the limit for autoignition of the mixture. For more reactive mixtures, autoignition can occur at turbulent burning velocities that are less than the maximum attainable one. Autoignition can be followed by quasi-detonation or fully developed detonation. The stability of ensuing detonations is discussed, along with the conditions that may lead to their extinction. © 2012 by Pleiades Publishing, Ltd.

  5. The Possibility of Quantum Deflagration in the Fe8 Nano-Magnet

    Science.gov (United States)

    Leviant, Tom; Zeldov, Eli; Myasoedov, Yuri; Keren, Amit

    2014-03-01

    We report spatially resolved, time-dependent, magnetization reversal measurements of Fe8 single crystals using a microscopic Hall bar array. We found that in some samples the molecules reverse their spin direction at the resonance field in the form of deflagration. The deflagration front velocity is on the order of 1 m/sec and sensitive to field gradients and sweep rates. We discuss the possibility that this slow deflagration can be explained by flipping rates determined by the tunnel splitting only, with no over-the-barrier motion.

  6. Collapse of accreting carbon-oxygen white dwarfs induced by carbon deflagration at high density

    International Nuclear Information System (INIS)

    Nomoto, K.

    1986-01-01

    A critical condition is obtained for which carbon deflagration induces collapse of an accreting C + O white dwarf, not explosion. If the carbon deflagration is initiated at central density as high as 10 10 g cm -3 and if the propagation of the deflagration wave is slower than ∼ 0.15 υ/sub s/ (υ/sub s/ is the sound speed), electron capture behind the burning front induces collapse to form a neutron star. This is the case for both conductive and convective deflagrations. Such a high central density can be reached if the white dwarf is sufficiently massive and cold at the onset of accretion and if the accretion rate is in the appropriate range. Models for Type Ia and Ib supernovae are also discussed. 66 refs., 8 figs

  7. Stability of cosmological deflagration fronts

    Science.gov (United States)

    Mégevand, Ariel; Membiela, Federico Agustín

    2014-05-01

    In a cosmological first-order phase transition, bubbles of the stable phase nucleate and expand in the supercooled metastable phase. In many cases, the growth of bubbles reaches a stationary state, with bubble walls propagating as detonations or deflagrations. However, these hydrodynamical solutions may be unstable under corrugation of the interface. Such instability may drastically alter some of the cosmological consequences of the phase transition. Here, we study the hydrodynamical stability of deflagration fronts. We improve upon previous studies by making a more careful and detailed analysis. In particular, we take into account the fact that the equation of motion for the phase interface depends separately on the temperature and fluid velocity on each side of the wall. Fluid variables on each side of the wall are similar for weakly first-order phase transitions, but differ significantly for stronger phase transitions. As a consequence, we find that, for large enough supercooling, any subsonic wall velocity becomes unstable. Moreover, as the velocity approaches the speed of sound, perturbations become unstable on all wavelengths. For smaller supercooling and small wall velocities, our results agree with those of previous works. Essentially, perturbations on large wavelengths are unstable, unless the wall velocity is higher than a critical value. We also find a previously unobserved range of marginally unstable wavelengths. We analyze the dynamical relevance of the instabilities, and we estimate the characteristic time and length scales associated with their growth. We discuss the implications for the electroweak phase transition and its cosmological consequences.

  8. Deflagration wave formed by ion beam, 2

    International Nuclear Information System (INIS)

    Abe, T.; Kasuya, K.; Niu, K.; Tamba, M.

    1979-06-01

    Analyses are given for structures of deflagration waves formed by ion beams in spherical targets. The singularity at the sonic point disappears in the spherical target if the beam pressure is in balance with the plasma pressure. The expanding supersonic flow of the background plasma can be connected with the subsonic flow in the core of the target through the deflagration wave. The length and the strength of the deflagration wave in the spherical target is comparable with the corresponding ones in the slab target. (author)

  9. Properties of Deflagration Fronts and Models for Type IA Supernovae

    Science.gov (United States)

    Domínguez, I.; Höflich, P.

    2000-01-01

    the turbulent deflagration, the duration of this phase is several times longer than the sound crossing time in the initial WD. Therefore, the energy produced during the early nuclear burning can be redistributed over the entire WD, causing a slow preexpansion. In this intermediate state, the WD is still bound but its binding energy is reduced by the amount of nuclear energy. The expansion ratio depends mainly on the total amount of burning during the deflagration phase. Consequently, the conditions are very similar under which nuclear burning takes place during the subsequent detonation phase. In our example, the density and temperature at the burning front changes by less than 3%, and the expansion velocity changes by less than 10%. The burning conditions are very close to previous calculations which used a constant deflagration velocity. Based on a comparison with observations, those required low deflagration speeds (~2%-3% of the speed of sound). Exceptions to the similarity are the innermost layers of ~0.03-0.05 Msolar. Still, nuclear burning is in nuclear statistical equilibrium, but the rate of electron capture is larger for the new descriptions of the flame propagation. Consequently, the production of very neutron-rich isotopes is increased. In our example, close to the center Ye is about 0.44, compared to 0.46 in the model with constant deflagration speed. This increases the 48Ca production by more than a factor of 100 to 3.E-6 Msolar. Conclusions from previous analyses of light curves and spectra on the properties of the WD and the explosions will not change, and even with the new descriptions, the delayed detonation scenario is consistent with the observations. Namely, the central density results with respect to the chemical structure of the progenitor and the transition density from deflagration to detonation do not change. The reason for this similarity is the fact that the total amount of burning during the long deflagration phase determines the

  10. Numerical indices for quantification of hydrogen mixing and deflagration potential in the nuclear reactor containment

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, Nilesh, E-mail: nilesh_agrawal@igcar.gov.in [Safety Research Institute, Atomic Energy Regulatory Board, Government of India, Kalpakkam (India); Das, Sarit K. [Department of Mechanical Engineering, Indian Institute of Technology, Madras, Chennai 600036 (India)

    2013-06-15

    Highlights: • Four indices for mixing and deflagration potential of H{sub 2} distributions are presented. • Theoretical basis and significance are explained through illustrations. • The influence of steam condensation on H{sub 2} distributions is studied numerically. • The indices depict the rate of mixing and changes in deflagration potential. • Results show that the indices can give useful integral information for comparison. -- Abstract: Studies on hydrogen distribution in the nuclear reactor containment and the effect of a distribution on subsequent combustion are important to nuclear safety. Contour plots, concentration profiles and ternary diagrams are routinely used to represent a distribution. The significance to safety has to be qualitatively inferred from these representations. Thus, there is a need to quantify distributions in terms of gross parameters that are important to safety. In the present study, four numerical indices are developed to obtain quantitative information on the mixing and deflagration potential of a distribution of hydrogen, steam and air. Two indices, namely, Average mole fraction and Non-uniformity index can be used to give the state of mixing of hydrogen in an enclosure at any instant of time. Similarly, the other two indices, namely, deflagration volume fraction and deflagration pressure ratio can be used to indicate the relative size of combustible cloud and the expected pressure rise in case of deflagration in the cloud at any instant of time. The significance and utility of the indices are brought forth through simple illustrations and numerical studies on the influence of steam condensation on hydrogen distributions. The indices depict the rate of mixing and changes in deflagration potential for the situations considered. Results form the simple studies show that the indices can give useful integral information for comparison of mixing and mitigation measures deployed in the nuclear reactor containment.

  11. Computational and experimental investigation of plasma deflagration jets and detonation shocks in coaxial plasma accelerators

    Science.gov (United States)

    Subramaniam, Vivek; Underwood, Thomas C.; Raja, Laxminarayan L.; Cappelli, Mark A.

    2018-02-01

    We present a magnetohydrodynamic (MHD) numerical simulation to study the physical mechanisms underlying plasma acceleration in a coaxial plasma gun. Coaxial plasma accelerators are known to exhibit two distinct modes of operation depending on the delay between gas loading and capacitor discharging. Shorter delays lead to a high velocity plasma deflagration jet and longer delays produce detonation shocks. During a single operational cycle that typically consists of two discharge events, the plasma acceleration exhibits a behavior characterized by a mode transition from deflagration to detonation. The first of the discharge events, a deflagration that occurs when the discharge expands into an initially evacuated domain, requires a modification of the standard MHD algorithm to account for rarefied regions of the simulation domain. The conventional approach of using a low background density gas to mimic the vacuum background results in the formation of an artificial shock, inconsistent with the physics of free expansion. To this end, we present a plasma-vacuum interface tracking framework with the objective of predicting a physically consistent free expansion, devoid of the spurious shock obtained with the low background density approach. The interface tracking formulation is integrated within the MHD framework to simulate the plasma deflagration and the second discharge event, a plasma detonation, formed due to its initiation in a background prefilled with gas remnant from the deflagration. The mode transition behavior obtained in the simulations is qualitatively compared to that observed in the experiments using high framing rate Schlieren videography. The deflagration mode is further investigated to understand the jet formation process and the axial velocities obtained are compared against experimentally obtained deflagration plasma front velocities. The simulations are also used to provide insight into the conditions responsible for the generation and sustenance of

  12. Carbon deflagration supernova, an alternative to carbon detonation

    Energy Technology Data Exchange (ETDEWEB)

    Nomoto, K; Sugimoto, D [Tokyo Univ. (Japan). Coll. of General Education; Neo, S [Kyoto Univ. (Japan). Dept. of Physics

    1976-02-01

    As an alternative to the carbon detonation, a carbon deflagration supernova model is presented by a full hydrodynamic computation. A deflagration wave, which propagates through the core due to convective heat transport, does not grow into detonation. Though it results in a complete disruption of the star, the difficulty of overproduction of iron peak elements can be avoided if the deflagration is relatively slow.

  13. Results of the AFWL deflagration gun experiments

    International Nuclear Information System (INIS)

    Hackett, K.E.; Baker, W.L.; Beason, J.D.

    1987-01-01

    The snowplow and deflagration modes of coaxial plasma gun operation have been experimentally investigated and computationally simulated at the Air Force Weapons Laboratory. The snowplow mode occurs when the gun is prefilled to a uniform gas density. The initial breakdown forms near the insulator at the gun breech. It heats the gas and creates a shock wave that travels down the gun, ionizing gas and producing a thin current sheath that travels just behind the shock front. The shock front piles up the gas in front of itself as it moves down the gun - hence the name ''snowplow''. Deflagration occurs when gas is injected into an evacuated gun so that the initial breakdown forms as the gas fills the gun. The ionized gas is accelerated into the vacuum region carrying current and magnetic field with it. A quasi-stationary diffuse discharge develops. Gas still entering the gun is processed through the deflagrating discharge and accelerated out the gun muzzle

  14. Deflagration wave formed by ion beam, 3

    International Nuclear Information System (INIS)

    Niu, Keishiro; Abe, Takashi; Tamba, Moritake.

    1980-01-01

    An analysis is given for the structure of the deflagration wave which is formed in a target bombarded by an ion beam. Stationary deflagration and/or detonation waves are formed at the surface of the target in a case in which the reaction energy of direct fusion and/or the beam energy deposited in the target are less than a critical value. On the other hand, no solution for stationary wave exists, if the energy deposited in the wave exceeds a critical value. In the latter case, the time-dependent fundamental equations reduce approximately to a self-similar type of equations. Numerical integrations are carried out for this type of differential equations, and an example of self-similar deflagration wave numerically obtained is plotted in the figures. (author)

  15. Structure and Stability of Deflagrations in Porous Energetic Materials

    Energy Technology Data Exchange (ETDEWEB)

    stephen B. Margolis; Forman A. Williams

    1999-03-01

    Theoretical two-phase-flow analyses have recently been developed to describe the structure and stability of multi-phase deflagrations in porous energetic materials, in both confined and unconfined geometries. The results of these studies are reviewed, with an emphasis on the fundamental differences that emerge with respect to the two types of geometries. In particular, pressure gradients are usually negligible in unconfined systems, whereas the confined problem is generally characterized by a significant gas-phase pressure difference, or overpressure, between the burned and unburned regions. The latter leads to a strong convective influence on the burning rate arising from the pressure-driven permeation of hot gases into the solid/gas region and the consequent preheating of the unburned material. It is also shown how asymptotic models that are suitable for analyzing stability may be derived based on the largeness of an overall activation-energy parameter. From an analysis of such models, it is shown that the effects of porosity and two-phase flow are generally destabilizing, suggesting that degraded propellants, which exhibit greater porosity than their pristine counterparts, may be more readily subject to combustion instability and nonsteady deflagration.

  16. Local strains in waste tank deflagration analysis

    International Nuclear Information System (INIS)

    Bryan, B.J.; Flanders, H.E. Jr.

    1993-01-01

    In recent years extensive effort has been expended to qualify buried nuclear waste storage tanks under accident conditions. One of these conditions is deflagration of the combustible gases which may build up over time. While much work has been done to calculate the general strain state, less effort has been made to address the local strains at structural discontinuities. An analytical method is presented for calculating these local strains and combining them with the general strain state. A closed form solution of the local strains is compared to a finite element solution

  17. Diagnostic techniques in deflagration and detonation studies.

    Science.gov (United States)

    Proud, William G; Williamson, David M; Field, John E; Walley, Stephen M

    2015-12-01

    Advances in experimental, high-speed techniques can be used to explore the processes occurring within energetic materials. This review describes techniques used to study a wide range of processes: hot-spot formation, ignition thresholds, deflagration, sensitivity and finally the detonation process. As this is a wide field the focus will be on small-scale experiments and quantitative studies. It is important that such studies are linked to predictive models, which inform the experimental design process. The stimuli range includes, thermal ignition, drop-weight, Hopkinson Bar and Plate Impact studies. Studies made with inert simulants are also included as these are important in differentiating between reactive response and purely mechanical behaviour.

  18. Pre-ignition confinement and deflagration violence in LX-10 and PBX 9501

    Energy Technology Data Exchange (ETDEWEB)

    Tringe, J. W., E-mail: tringe2@llnl.gov; Glascoe, E. A.; McClelland, M. A.; Greenwood, D.; Chambers, R. D.; Springer, H. K.; Levie, H. W. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States)

    2014-08-07

    In thermal explosions of the nitramine octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX)-based explosives LX-10 and PBX-9501, the pre-ignition spatial and temporal heating profile defines the ignition location. The ignition location then determines the extent of inertial confinement and the violence of the resulting deflagration. In this work, we present results of experiments in which ∼23 g cylinders of LX-10 and PBX 9501 in thin-walled aluminum confinement vessels were subjected to identical heating profiles but which presented starkly different energy release signatures. Post-explosion LX-10 containment vessels were completely fragmented, while the PBX 9501 vessels were merely ruptured. Flash x-ray radiography images show that the initiation location for the LX-10 is a few mm farther from the end caps of the vessel relative to the initiation location of PBX 9501. This difference increases deflagration confinement for LX-10 at the time of ignition and extends the pressurization time during which the deflagration front propagates in the explosive. The variation in the initiation location, in turn, is determined by the thermal boundary conditions, which differ for these two explosives because of the larger coefficient of thermal expansion and greater thermal stability of the Viton binder in LX-10 relative to the estane and bis(2,2-dinitropropyl) acetal/formal binder of the PBX 9501. The thermal profile and initiation location were modeled for LX-10 using the hydrodynamics and structures code ALE3D; results indicate temperatures in the vicinity of the ignition location in excess of 274 °C near the time of ignition. The conductive burn rates for these two explosives, as determined by flash x-ray radiography, are comparable in the range 0.1–0.2 mm/μs, somewhat faster than rates observed by strand burner experiments for explosives in the temperature range 150–180 °C and pressures up to 100 MPa. The thinnest-wall aluminum containment vessels

  19. Pre-ignition confinement and deflagration violence in LX-10 and PBX 9501

    International Nuclear Information System (INIS)

    Tringe, J. W.; Glascoe, E. A.; McClelland, M. A.; Greenwood, D.; Chambers, R. D.; Springer, H. K.; Levie, H. W.

    2014-01-01

    In thermal explosions of the nitramine octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX)-based explosives LX-10 and PBX-9501, the pre-ignition spatial and temporal heating profile defines the ignition location. The ignition location then determines the extent of inertial confinement and the violence of the resulting deflagration. In this work, we present results of experiments in which ∼23 g cylinders of LX-10 and PBX 9501 in thin-walled aluminum confinement vessels were subjected to identical heating profiles but which presented starkly different energy release signatures. Post-explosion LX-10 containment vessels were completely fragmented, while the PBX 9501 vessels were merely ruptured. Flash x-ray radiography images show that the initiation location for the LX-10 is a few mm farther from the end caps of the vessel relative to the initiation location of PBX 9501. This difference increases deflagration confinement for LX-10 at the time of ignition and extends the pressurization time during which the deflagration front propagates in the explosive. The variation in the initiation location, in turn, is determined by the thermal boundary conditions, which differ for these two explosives because of the larger coefficient of thermal expansion and greater thermal stability of the Viton binder in LX-10 relative to the estane and bis(2,2-dinitropropyl) acetal/formal binder of the PBX 9501. The thermal profile and initiation location were modeled for LX-10 using the hydrodynamics and structures code ALE3D; results indicate temperatures in the vicinity of the ignition location in excess of 274 °C near the time of ignition. The conductive burn rates for these two explosives, as determined by flash x-ray radiography, are comparable in the range 0.1–0.2 mm/μs, somewhat faster than rates observed by strand burner experiments for explosives in the temperature range 150–180 °C and pressures up to 100 MPa. The thinnest-wall aluminum containment vessels

  20. Deflagration to detonation experiments in granular HMX

    Energy Technology Data Exchange (ETDEWEB)

    Burnside, N.J.; Son, S.F.; Asay, B.W.; Dickson, P.M.

    1998-03-01

    In this paper the authors report on continuing work involving a series of deflagration-to-detonation transition (DDT) experiments in which they study the piston-initiated DDT of heavily confined granular cyclotetramethylenetetranitramine (HMX). These experiments were designed to he useful in model development and evaluation. A main focus of these experiments is the effect of density on the DDT event. Particle size distribution and morphology are carefully characterized. In this paper they present recent surface area analysis. Earlier studies demonstrated extensive fracturing and agglomeration in samples at densities as low as 75% TMD as evidenced by dramatic decreases in particle size distribution due to mild stimulus. This is qualitatively confirmed with SEM images and quantitatively studied with gas absorption surface area analysis. Also, in this paper they present initial results using a microwave interferometer technique. Dynamic calibration of the technique was performed, a 35 GHz signal is used to increase resolution, and the system has been designed to be inexpensive for repeated experiments. The distance to where deformation of the inner wall begins for various densities is reported. This result is compared with the microwave interferometer measurements.

  1. Efficient numerical simulation of the deflagration-to-detonation transition

    International Nuclear Information System (INIS)

    Ettner, Florian Anton

    2013-01-01

    In order to improve safety analyses of nuclear power plants, it is necessary to investigate if hydrogen-air mixtures (created in severe accidents) burn in a deflagrative manner or whether a deflagration-to-detonation transition (DDT) occurs. In this work a CFD solver has been developed for the simulation of a complete combustion process including DDT. The density-based solver incorporates a deflagration model and an auto-ignition model which are coupled via a progress variable. The application to both homogeneous and inhomogeneous mixtures shows very good agreement with experiments. Depending on the boundary conditions the presence of a hydrogen concentration gradient can either increase or decrease the probability of DDT when compared to a homogeneous mixture. Under certain circumstances extremely high pressure loads occur even in areas of low hydrogen content. This should be taken into consideration in future safety analyses.

  2. Deflagration to detonation transition in thermonuclear supernovae

    International Nuclear Information System (INIS)

    Charignon, Camille

    2013-01-01

    Type Ia supernovae are an important tool to determine the expansion history of our Universe. Thus, considerable attention has been given to both observations and models of these events. The most popular explosion model is the central ignition of a deflagration in the dense C+O interior of a Chandrasekhar mass white dwarf, followed by a transition to a detonation (TDD). We study in this thesis a new mechanism for this transition. The most robust and studied progenitor model and the postulated mechanism for the TDD, the so called 'Zel'dovich gradient mechanism', are presented. State of the art 3D simulations of such a delayed detonation, at the price of some adjustments, can indeed reproduce observables. But due to largely unresolved physical scales, such simulations cannot explain the TDD by themselves, and especially, the physical mechanism which triggers this transition - which is not yet understood, even on Earth, for unconfined media. It is then discussed why the current Zel'dovich mechanism might be too constraining for a SN Ia model, pointing to a new approach, which is the core result of this thesis.In the final part, our alternative model for DDT in supernovae, the acoustic heating of the pre-supernova envelope, is presented. A planar model first proves that small amplitude acoustic perturbations (generated by a turbulent flame) are actually amplified in a steep density gradient, up to a point where they turn into shocks able to trigger a detonation. Then, this mechanism is applied to more realistic models, taking into account, in spherical geometry, the expanding envelope. A parametric study demonstrates the validity of the model for a reasonable range of acoustic wave amplitudes and frequencies.To conclude, some exploratory 2D and 3D MHD simulations, seeking for realistic acoustic source compatible with our mechanism, are presented. (author) [fr

  3. Recent development in high energy plasma production techniques by the deflagration plasma gun

    International Nuclear Information System (INIS)

    Cheng, D.Y.; Chang, C.N.; Tripathi, P.P.

    1983-01-01

    This chapter reports experimental data and experience which establish the phenomenon of deflagration in plasma as unique and with quite different properties from the normal snowplow modes. Demonstrates that extremely high velocities and energies in plasma beams are possible with obvious applications in many field and, in particular, in fusion. Suggests that the potential of deflagration beams' scalability to very high energy quasi-neutral plasma beam is possible with present day technology. Discusses plasma deflagration in a T-tube; coaxial deflagration plasma guns; a typical deflagration gun and its operating procedures; electrical design considerations; kinetic theory point of view of the deflagration acceleration of particles; measurements and results; properties of the deflagration gun; applications; inertial confinement experiments; injection into magnetic confinement systems; interaction experiments; and highly energetic beams

  4. Experimental determination of deflagration velocity and blue cone height for natural gases from Guajira and Cusiana

    International Nuclear Information System (INIS)

    Fernandez Martinez, Alejandro; Piza Molina, Carlos Andres; Vanegas Jaramillo, Gilmar Adoni

    2001-01-01

    In this project the conical flame method was implemented to measure deflagration rate and a direct photography method to measure the height of blue cone for to natural gases with Guajira and Cusiana composition. Besides of these the existent relation between both variables was determined. The information obtained in this work is fundamental, as long as it provides an experimental method that applied to real conditions, allows the characterization of the natural gases of Guajira and Cusiana, witch will be of utility to define criterions of de sing and interchange ability in the commercial and industrial combustion systems

  5. Unconfined deflagrative explosions without turbulence: experiments and model

    International Nuclear Information System (INIS)

    Lannoy, A.

    1989-01-01

    This paper reviews laboratory, balloon and open field experiments which have been performed to study the deflagration regime in free air. In a first part, are considered different models available to estimate deflagrative unconfined explosions effects, without turbulence. Then, a description is given of the known performed tests, which indicate the effective scale of various experiments, their operating conditions and the type of measurements carried out. Results are presented and discussed. The influence on the explosion force of different parameters (fuel concentration gradients, flammable mixture shape and size, ignition energy) is estimated. The overall conclusion of this survey is that flammable mixtures drifting over open field and ignited, will burn with low flame speed and consequently will generate very weak pressure effects [fr

  6. Numerical simulations of mechanical and ignition-deflagration responses for PBXs under low-to-medium-level velocity impact loading.

    Science.gov (United States)

    Yang, Kun; Wu, Yanqing; Huang, Fenglei; Li, Ming

    2017-09-05

    An effective computational model is required to accurately predict the dynamic responses in accidental initiations of explosives. The present work uses a series of two-dimensional mechanical-chemical simulations performed via a hydrodynamic-code, DREXH-2D, to efficiently describe the mechanical and ignition-deflagration responses of cased cylindrical polymer-bonded explosives (PBXs) undergoing a low-to-medium-level impact (70-350m/s) in longitudinal direction. The ignition response was predicted based on an ignition criterion of effective plastic work. Slow burning and its growth to deflagration were described through a pressure-dependent reaction rate equation. The extreme value of effective plastic work was found to be useful to determine the ignition threshold velocity for PBXs. For low-level velocity impact, the incident stress wave reflection from lateral surfaces contributed to the formation of ignition regions. After the ignition, the deflagration was induced in the medium-level impact, and its violence was related to the shock strength. However, the low-strength stress wave only induced reaction at local regions, and sequent burning was no longer sensitive to the strength of incident wave. The predicted pressure and temperature results of PBXs were consistent with the medium-level impact tests performed by China Academy of Engineering Physics. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Propagation of avalanches in Mn12-acetate: magnetic deflagration.

    Science.gov (United States)

    Suzuki, Yoko; Sarachik, M P; Chudnovsky, E M; McHugh, S; Gonzalez-Rubio, R; Avraham, Nurit; Myasoedov, Y; Zeldov, E; Shtrikman, H; Chakov, N E; Christou, G

    2005-09-30

    Local time-resolved measurements of fast reversal of the magnetization of single crystals of Mn12-acetate indicate that the magnetization avalanche spreads as a narrow interface that propagates through the crystal at a constant velocity that is roughly 2 orders of magnitude smaller than the speed of sound. We argue that this phenomenon is closely analogous to the propagation of a flame front (deflagration) through a flammable chemical substance.

  8. Nitramine Monopropellant Deflagration and General Nonsteady Reacting Rocket Chamber Flows.

    Science.gov (United States)

    1980-01-01

    structure of RDX was also investigated by Harris,2 using X-ray diffraction. 2. The Crystalline Polymorphs of RMX HMX in the solid state exhibits four distinct...deflagration were shown to occur after transition . The critical transition pressure was found to correlate with the mean particle size of HMX and RDX ...Structure ....... ............ 4 2. The Crystalline Polymorphs of HMX ... ....... 5 3. Sublimation, Vaporization and Melting...... 6 C. The Chemical

  9. Response of a Type III waste tank to hydrogen deflagration

    International Nuclear Information System (INIS)

    Gong, Chung; Jerrell, J.W.; Pelfrey, J.R.; Yau, W.W.F.

    1992-01-01

    The type III waste tank is built with ASTM A516 Grade 70 steel shells in the shape of a torus with a central concrete core. The tank is buried underground and covered with a four foot thick reinforced concrete slab. The tank is enriched by 2.5 foot thick reinforced concrete wall. Between the tank surface and the wall there is a 2.5 foot annular space. The tank itself is called the ''primary liner.'' The interior surface of the concrete wall is line with steel plates, called the ''secondary liner.'' The base of the tank rests on a concrete mat. Underneath the mat the secondary liner extends from the wall to the central column surfaces. The bottom liner is attached to the reinforced concrete foundation. Based on the conditions that the tank is filled with liquid wastes to 50% of the design capacity, and that the accumulation of hydrogen becomes 20% inside its free board, the resulting deflagration would cause an overpressure of 100 psig in the tank [Wallace and Yau, 1986]. The task of this analysis is to simulate the ''hydrogen deflagration'' scenario in the Type III Waste Tank complex. During the deflagration, the stresses in the steel tank would be expected to exceed the elastic limit of the steel and the tank would then undergo large deformation. The concrete roof slab could be fractured by the expansion of the tank. The central concrete column would start to exhibit large deformation first. All the structural members in the system are expected to interact drastically during the deflagration

  10. A model for vented deflagration of hydrogen in a volume

    International Nuclear Information System (INIS)

    Mulpuru, S.R.; Wilkin, G.B.

    1982-02-01

    A simple model was constructed to predict the property transients resulting from the deflagration of a combustible mixture in a sphere or cylinder with venting of the gas mixture to the environment. A computer program VENT, was written to solve the model equation. The model will be particularly useful for studying hydrogen burning effects in loss-of-coolant plus losss of emergency coolant accidents in CANDU reactors

  11. Effects of two-phase flow in a model for nitramine deflagration

    International Nuclear Information System (INIS)

    Li, S.C.; Williams, F.A.; Margolis, S.B.

    1990-01-01

    Methods of asymptotic analysis are employed to extend an earlier model for the deflagration of nitramines to account for the presence of bubbles and droplets in a two-phase layer at the propellant surface during combustion. Two zones are identified in the two-phase region: one, at higher liquid volume fractions, maintains evaporative equilibrium, whereas the other, at lower liquid volume fractions, exhibits nonequilibrium vaporization. By introducing the most reasonable estimates for two-phase behavior of nitramines, the steady burning rates are found to be close to those obtained for models with a sharp liquid-gas interface. Good agreement with measured burning rates and pressure and temperature sensitivities are achieved through reasonable approximations concerning overall chemical-kinetic parameters

  12. Stability of quasi-steady deflagrations in confined porous energetic materials

    Energy Technology Data Exchange (ETDEWEB)

    Alexander M. Telengator; Stephen B. Margolis; Forman A. Williams

    2000-03-01

    Previous analyses have shown that unconfined deflagrations propagating through both porous and nonporous energetic materials can exhibit a thermal/diffusive instability that corresponds to the onset of various oscillatory modes of combustion. For porous materials, two-phase-flow effects, associated with the motion of the gas products relative to the condensed material, play a significant role that can shift stability boundaries with respect to those associated with the nonporous problem. In the present work, additional significant effects are shown to be associated with confinement, which produces an overpressure in the burned-gas region that leads to reversal of the gas flow and hence partial permeation of the hot gases into the unburned porous material. This results in a superadiabatic effect that increases the combustion temperature and, consequently, the burning rate. Under the assumption of gas-phase quasi-steadiness, an asymptotic model is presented that facilitates a perturbation analysis of both the basic solution, corresponding to a steadily propagating planar combustion wave, and its stability. The neutral stability boundaries collapse to the previous results in the absence of confinement, but different trends arising from the presence of the gas-permeation layer are predicted for the confined problem. Whereas two-phase-flow effects are generally destabilizing in the unconfined geometry, the effects of increasing overpressure and hence combustion temperature associated with confinement are shown to be generally stabilizing with respect to thermal/diffusive instability, analogous to the effects of decreasing heat losses on combustion temperature and stability in single-phase deflagrations.

  13. One-step reduced kinetics for lean hydrogen-air deflagration

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Galisteo, D.; Sanchez, A.L. [Area de Mecanica de Fluidos, Univ. Carlos III de Madrid, Leganes 28911 (Spain); Linan, A. [ETSI Aeronauticos, Pl. Cardenal Cisneros 3, Madrid 28040 (Spain); Williams, F.A. [Dept. of Mechanical and Aerospace Engineering, University of California San Diego, La Jolla, CA 92093-0411 (United States)

    2009-05-15

    A short mechanism consisting of seven elementary reactions, of which only three are reversible, is shown to provide good predictions of hydrogen-air lean-flame burning velocities. This mechanism is further simplified by noting that over a range of conditions of practical interest, near the lean flammability limit all reaction intermediaries have small concentrations in the important thin reaction zone that controls the hydrogen-air laminar burning velocity and therefore follow a steady state approximation, while the main species react according to the global irreversible reaction 2H{sub 2} + O{sub 2} {yields} 2H{sub 2}O. An explicit expression for the non-Arrhenius rate of this one-step overall reaction for hydrogen oxidation is derived from the seven-step detailed mechanism, for application near the flammability limit. The one-step results are used to calculate flammability limits and burning velocities of planar deflagrations. Furthermore, implications concerning radical profiles in the deflagration and reasons for the success of the approximations are clarified. It is also demonstrated that adding only two irreversible direct recombination steps to the seven-step mechanism accurately reproduces burning velocities of the full detailed mechanism for all equivalence ratios at normal atmospheric conditions and that an eight-step detailed mechanism, constructed from the seven-step mechanism by adding to it the fourth reversible shuffle reaction, improves predictions of O and OH profiles. The new reduced-chemistry descriptions can be useful for both analytical and computational studies of lean hydrogen-air flames, decreasing required computation times. (author)

  14. Small-scale deflagration cylinder test with velocimetry wall-motion diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Hooks, Daniel E [Los Alamos National Laboratory; Hill, Larry G [Los Alamos National Laboratory; Pierce, Timothy H [Los Alamos National Laboratory

    2010-01-01

    Predicting the likelihood and effects of outcomes resultant from thermal initiation of explosives remains a significant challenge. For certain explosive formulations, the general outcome can be broadly predicted given knowledge of certain conditions. However, there remain unexplained violent events, and increased statistical understanding of outcomes as a function of many variables, or 'violence categorization,' is needed. Additionally, the development of an equation of state equivalent for deflagration would be very useful in predicting possible detailed event consequences using traditional hydrodynamic detonation moders. For violence categorization, it is desirable that testing be efficient, such that it is possible to statistically define outcomes reliant on the processes of initiation of deflagration, steady state deflagration, and deflagration to detonation transitions. If the test simultaneously acquires information to inform models of violent deflagration events, overall predictive capabilities for event likelihood and consequence might improve remarkably. In this paper we describe an economical scaled deflagration cylinder test. The cyclotetramethylene tetranitramine (HMX) based explosive formu1lation PBX 9501 was tested using different temperature profiles in a thick-walled copper cylindrical confiner. This test is a scaled version of a recently demonstrated deflagration cylinder test, and is similar to several other thermal explosion tests. The primary difference is the passive velocimetry diagnostic, which enables measurement of confinement vessel wall velocities at failure, regardless of the timing and location of ignition.

  15. Bubble velocity in the nonlinear Rayleigh-Taylor instability at a deflagration front

    International Nuclear Information System (INIS)

    Modestov, Mikhail; Bychkov, Vitaly; Betti, Riccardo; Eriksson, Lars-Erik

    2008-01-01

    The Rayleigh-Taylor instability at a deflagration front is studied systematically using extensive direct numerical simulations. It is shown that, for a sufficiently large gravitational field, the effects of bubble rising dominate the deflagration dynamics. It is demonstrated both analytically and numerically that the deflagration speed is described asymptotically by the Layzer theory in the limit of large acceleration. In the opposite limit of small and zero gravitational field, intrinsic properties of the deflagration front become important. In that case, the deflagration speed is determined by the velocity of a planar front and by the Darrieus-Landau instability. Because of these effects, the deflagration speed is larger than predicted by the Layzer theory. An analytical formula for the deflagration speed is suggested, which matches two asymptotic limits of large and small acceleration. The formula is in good agreement with the numerical data in a wide range of Froude numbers. The present results are also in agreement with previous numerical simulations on this problem

  16. Late Wash/Nitric Acid flowsheet hydrogen generation bases for simulation of a deflagration/detonation in the DWPF CPC

    International Nuclear Information System (INIS)

    Ritter, J.A.

    1993-01-01

    Hydrogen generation data obtained from IDMS runs PX4 and PX5 will be used to determine a bases for a deflagration/detonation simulation in the DWPF CPC. This simulation is necessary due to the new chemistry associated with the Late Wash/ Nitric Acid flowsheet and process modifications associated with the presence of H 2 in the offgas. The simulation will be performed by Professor Van Brunt from the University of South Carolina. The scenario which leads up to the deflagration/detonation simulation will be chosen such that the following conditions apply. The SRAT is filled to its maximum operating level with 9,600 gal of sludge, which corresponds to the minimum vapor space above the sludge. The SRAT is at the boiling point, producing H 2 at a very low rate (about 10 % of the peak) and 15 scfm of air inleakage is entering the SRAT. Then, the H 2 generation rate will be allowed to increase exponentially (catalyst activation) until it readies the peak H 2 generation rate of the IDMS run, after which the H 2 generation rate will be allowed to decay exponentially (catalyst deactivation) until the total amount of H2 produced is between 85 and 100% of that produced during the IDMS run

  17. BWR Mark III pressure suppression containment response to hydrogen deflagration

    International Nuclear Information System (INIS)

    Fuls, G.M.; Gunter, A.D.

    1982-01-01

    The CLASIX-3 computer program has been used to evaluate the temperature and pressure response of the BWR Mark III Suppression Containment System to hydrogen deflagration resulting from a degraded core condition. The CLASIX-3 computer program is an extension of the CLASIX program which was originally developed to analyze ice condenser containments. A brief description is given of the modifications made to CLASIX to increase its flexibility and versatility to include the capability of analyzing the Mark III Containment. Analytical results are presented for the two base case transients. The two base cases are the stuck open steam relief valve and the small break LOCA, both of which are assumed to lead to a degraded core condition and the release of hydrogen to the containment. Results include pressure and temperature response, gas concentrations and suppression pool response

  18. Deflagration explosion of an unconfined fuel vapor cloud

    International Nuclear Information System (INIS)

    Taki, S.; Ogawa, Y.

    1981-01-01

    In the reported study, explosions are produced by injecting a small amount of liquefied petroleum gas (LPG) into air. The ignition and subsequent evolution of the explosion of the unconfined vapor cloud are observed by the simultaneous use of direct photographs and pressure recording. The intensity of the compression waves generated by unconfined combustion are modeled on the basis of the solution of the conservation equations for the flow associated with a spherically symmetric expanding piston. The obtained results are compared with the measurements. It is pointed out that the development of unconfined fuel vapor cloud explosions can be divided into two stages, including a deflagration propagating in premixed gases, which is followed by a diffusion flame promoted by buoyancy and convection. The experimental result from the pressure measurement is found to be quantitatively consistent with the result obtained from the spherical piston model

  19. A plasma deflagration accelerator as a platform for laboratory astrophysics

    Science.gov (United States)

    Underwood, Thomas C.; Loebner, Keith T. K.; Cappelli, Mark A.

    2017-06-01

    The replication of astrophysical flows in the laboratory is critical for isolating particular phenomena and dynamics that appear in complex, highly-coupled natural systems. In particular, plasma jets are observed in astrophysical contexts at a variety of scales, typically at high magnetic Reynolds number and driven by internal currents. In this paper, we present detailed measurements of the plasma parameters within deflagration-produced plasma jets, the scaling of these parameters against both machine operating conditions and the corresponding astrophysical phenomena. Using optical and spectroscopic diagnostics, including Schlieren cinematography, we demonstrate the production of current-driven plasma jets of ∼100 km/s and magnetic Reynolds numbers of ∼100, and discuss the dynamics of their acceleration into vacuum. The results of this study will contribute to the reproduction of various types of astrophysical jets in the laboratory and indicate the ability to further probe active research areas such as jet collimation, stability, and interaction.

  20. Modelling of hydrogen deflagration in vessels using GOTHIC

    International Nuclear Information System (INIS)

    Wang, L.L.; Wong, R.C.; Fluke, R.J.

    1997-01-01

    Simulations of hydrogen deflagration tests were performed using the discrete lumpedparameter bum model of the computer code GOTHIC. The tests were performed in small and large scale spherical vessels and a cylindrical vessel. The small vessel cases included the effects of venting, and the cylindrical tests included the effects of obstacles. The simulations were performed by sub-dividing the volumes into either five or ten 'cells', and parameters such as flame speed and hydrogen concentration were varied. Measured flame speeds were used in the simulations and the results were compared to simulations using the code 'default' flame speed. The calculated pressure transients compared well with the experimental results using the measured flame speeds in the simulations of unvented cases, whereas for vented cases, the predicted peak pressures were generally less than the measurements. However, when the code default flame speed is used, the predicted peak pressures were more consistent and generally conservative when compared with the measurements. When the default flame speeds were used for vessels without obstacles, the peak pressures obtained were higher and the bum times were shorter than the experimental measurements. This was probably due to the basis for the correlations used for default flame speed in the bum model. These correlations were derived from intermediate-scale experiments for hydrogen combustion in relatively turbulent (fans on) environments. For vessels without obstacles, laminar flame speeds were more likely. Hence, the predicted peak pressures would be expected to be higher than the experimental results. In order to account for the degree of turbulence and flame acceleration caused by the presence of obstacles, higher than default flame speeds were used in the simulation of the vessel with obstacles. It was found that twice the default flame speed provided predictions of peak pressures comparable to the measurements. Based on the simulations conducted

  1. Hydrogen deflagration simulations under typical containment conditions for nuclear safety

    Energy Technology Data Exchange (ETDEWEB)

    Yanez, J., E-mail: jorge.yanez@kit.edu [Institute for Energy and Nuclear Technology, Karlsruhe Institute of Technology, Kaiserstrasse 12, 76131 Karlsruhe (Germany); Kotchourko, A.; Lelyakin, A. [Institute for Energy and Nuclear Technology, Karlsruhe Institute of Technology, Kaiserstrasse 12, 76131 Karlsruhe (Germany)

    2012-09-15

    Highlights: Black-Right-Pointing-Pointer Lean H{sub 2}-air combustion experiments highly relevant to typical NPP simulated. Black-Right-Pointing-Pointer Analyzed effect of temperature, concentration of H{sub 2}, and steam concentration. Black-Right-Pointing-Pointer Similar conditions and H{sub 2} concentration yielded different combustion regimes. Black-Right-Pointing-Pointer Flame instabilities (FIs) were the effect driving divergences. Black-Right-Pointing-Pointer Model developed for acoustic FI in simulations. Agreement experiments obtained. - Abstract: This paper presents the modeling of low-concentration hydrogen deflagrations performed with the recently developed KYLCOM model specially created to perform calculations in large scale domains. Three experiments carried out in THAI facility (performed in the frames of international OECD THAI experimental program) were selected to be analyzed. The tests allow studying lean mixture hydrogen combustion at normal ambient, elevated temperature and superheated and saturated conditions. The experimental conditions considered together with the facility size and shape grant a high relevance degree to the typical NPP containment conditions. The results of the simulations were thoroughly compared with the experimental data, and the comparison was supplemented by the analysis of the combustion regimes taking place in the considered tests. Results of the analysis demonstrated that despite the comparatively small difference in mixture properties, three different combustion regimes can be definitely identified. The simulations of one of the cases required of the modeling of the acoustic-parametric instability which was carefully undertaken.

  2. Numerical modeling of deflagration mode in coaxial plasma guns

    Science.gov (United States)

    Sitaraman, Hariswaran; Raja, Laxminarayan

    2012-10-01

    Pulsed coaxial plasma guns have been used in several applications in the field of space propulsion, nuclear fusion and materials processing. These devices operate in two modes based on the delay between gas injection and breakdown initiation. Larger delay led to the plasma detonation mode where a compression wave in the form of a luminous front propagates from the breech to the muzzle. Shorter delay led to the more efficient deflagration mode characterized by a relatively diffuse plasma with higher resistivity. The overall physics of the discharge in the two modes of operation and in particular the latter remain relatively unexplored. Here we perform a computational modeling study by solving the non-ideal Magneto-hydrodynamics equations for the quasi-neutral plasma in the coaxial plasma gun. A finite volume formulation on an unstructured mesh framework with an implicit scheme is used to do stable computations. The final work will present details of important species in the plasma, particle energies and Mach number at the muzzle. A comparison of the plasma parameters will be made with the experiments reported in ref. [1]. [4pt] [1] F. R. Poehlmann et al., Phys. Plasmas 17, 123508 (2010)

  3. Modelling of hydrogen deflagration in a vented vessel

    International Nuclear Information System (INIS)

    Wang, L.L.; Wong, R.C.

    1995-01-01

    Hydrogen Deflagration inside closed and vented 2.3 m diameter vessels were simulated by using the GOTHIC lumped-parameter computer code. Different cell arrangements were used in the modelling. Other parameters such as flame speed and hydrogen concentration were studied. It was found that the calculated peak pressures for cases using the experimental measured burn durations were close to the pressures measured from the experiments. When the default flame speed was used, higher peak pressure was predicted by GOTHIC. This could be explained by the the fact that the default flame speed used in the GOTHIC burn model was based on the results of a large scale test with moderate turbulence level. However, the overall results of the pressure transients were comparable with the experimental data. In addition, time and spatial convergencies of the model were also studied. The peak pressure estimated by modelling the sphere as five or more spherical cells was shown to converge to within +/- 3 percent. (author). 8 refs., 6 tabs., 9 figs

  4. Interaction of turbulent deflagrations with representative flow obstacles

    International Nuclear Information System (INIS)

    Durst, B.; Ardey, N.; Mayinger, F.

    1997-01-01

    In the case of a gradual release of hydrogen in the course of an assumed, severe accident in a light water reactor, the combustion will normally start out as a slow deflagration. Acceleration of an initially slow flame due to interactions of chemical kinetics and turbulent heat and mass transfer can result in very high flame speeds. Therefore, in order to assess hydrogen mitigation techniques, detailed knowledge about flame acceleration and interaction of flames with obstacles is required. The reported investigations are aimed at the investigation of the mechanisms responsible for turbulent flame acceleration and improving present correlations for estimates and models for numerical simulations of hydrogen combustion processes. A medium-scale square cross-section setup is employed, using flow obstacles with shapes representative for reactor containments. The global flame speed is deduced from measurements using thermocouples, pressure transducers and photodiodes. Measurements using a two-component LDA-system are being carried through in order to correlate global flame spread and local turbulence parameters. Results indicate that low blockage-ratio obstacles only marginally influence the flame, as disturbances which are induced remain local to the vicinity of the obstacle and die out very quickly downstream thereof. Flow visualizations by means of a Schlieren setup indicate very complex flow structures in the vicinity of obstacles. The results are being used to validate turbulent reaction models. A model based on probability density functions (pdf) of assumed shape has been developed and initial calculations are presented. (author)

  5. In Situ Imaging of Particle Formation and Dynamics in Reactive Material Deflagrations

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, Kyle T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-12-12

    Reactive composites utilizing nanoparticles have been the topic of extensive research in the past two decades. The driver for this is that, as the particle size is decreased, the mixing scale between constituents is greatly reduced, which has long thought to increase the rate of chemical reaction. While a general trend of increased reactivity has been seen for metal / metal oxide, or thermite, reactive materials, some results have demonstrated diminishing returns as the particle size is further decreased. Recent results have shown that nanoparticles, which are typically aggregates of several primary particles, can undergo very rapid coalescence to form micron particles once a critical temperature is reached. Experiments on this topic to date have been performed on very small sample masses, and sometimes under vacuum; conditions which are not representative of the environment during a deflagration. In this feasibility study, a custom burn tube was used to ignite and react 100 mg powdered thermite samples in long acrylic tubes. X-ray imaging at APS Sector 32 was performed to image the particle field as a function of distance and time as the rarefied particle cloud expanded and flowed down the tube. Five different thermite formulations were investigated, Al / CuO, Al / Fe2O3, Al / SnO2, Al / WO3, and Al / Fe2O3, along with Al / CuO formulations with different sizes of Al particles ranging from 80 nm to approximate 10 μm. The results clearly show that the sample powder reacts and unloads into a distribution of larger micron-scale particles (~5-500 μm), which continue to react and propagate as the particle-laden stream flows down the tube. This was the first direct imaging of the particle field during a thermite deflagration, and gives significant insight into the evolution of reactants to products. Analysis of phase is currently being pursued to determine whether this method can be used to extract

  6. Extending atomistic scale chemistry to mesoscale model of condensed-phase deflagration

    Science.gov (United States)

    Joshi, Kaushik; Chaudhuri, Santanu

    2017-01-01

    Predictive simulations connecting chemistry that follow the shock or thermal initiation of energetic materials to subsequent deflagration or detonation events is currently outside the realm of possibilities. Molecular dynamics and first-principles based dynamics have made progress in understanding reactions in picosecond to nanosecond time scale. Results from thermal ignition of different phases of RDX show a complex reaction network and emergence of a deterministic behavior for critical temperature before ignition and hot spot growth rates. The kinetics observed is dependent on the hot spot temperature, system size and thermal conductivity. For cases where ignition is observed, the incubation period is dominated by intermolecular and intramolecular hydrogen transfer reactions. The gradual temperature and pressure increase in the incubation period is accompanied by accumulation of heavier polyradicals. The challenge of connecting such chemistry in mesoscale simulations remain in reducing the complexity of chemistry. The hot spot growth kinetics in RDX grains and interfaces is an important challenge for reactive simulations aiming to fill in the gaps in our knowledge in the nanoseconds to microseconds time scale. The results discussed indicate that the mesoscale chemistry may include large polyradical molecules in dense reactive mix reaching an instability point at certain temperatures and pressures.

  7. A simple model of the plasma deflagration gun including self-consistent electric and magnetic fields

    International Nuclear Information System (INIS)

    Enloe, C.L.; Reinovsky, R.E.

    1985-01-01

    At the Air Force Weapons Laboratory, interest has continued for some time in energetic plasma injectors. A possible scheme for such a device is the plasma deflagration gun. When the question arose whether it would be possible to scale a deflagration gun to the multi-megajoule energy level, it became clear that a scaling law which described the fun as a circuit element and allowed one to confidently scale gun parameters would be required. The authors sought to develop a scaling law which self-consistently described the current, magnetic field, and velocity profiles in the gun. They based this scaling law on plasma parameters exclusively, abandoning the fluid approach

  8. Magnetic avalanches in manganese-acetate, "magnetic deflagration"

    Science.gov (United States)

    Suzuki, Yoko

    as a narrow interface that propagate through the crystal at a constant velocity which is roughly two orders of magnitude smaller than the speed of sound in solids. We argue this phenomenon is closely analogous to the propagation of a flame front(deflagration) through a flammable chemical substance.

  9. The use of light detectors to discriminate between detonation and deflagration of explosive charges

    CSIR Research Space (South Africa)

    Olivier, M

    2015-10-01

    Full Text Available It is well known that reacting explosives emit light of varying intensity across the spectrum. Measurement of this light emission could have many applications, i.a. the local or stand-off discrimination between full detonation and deflagration...

  10. Simulation of hydrogen deflagration experiments in the ENACCEF facility using ASTEC code

    International Nuclear Information System (INIS)

    Povilaitis, Mantas; Urbonavicius, Egidijus; Rimkevicius, Sigitas

    2011-01-01

    During a hypothetic severe accident in the NPP involving degradation of the core of a light water reactor, hydrogen could be generated and released into the containment atmosphere posing a deflagration or even a detonation risk. In the case of deflagration, the integrity of the containment would be threatened by the increase of the containment atmosphere pressure and temperature. Other risks of containment damage due to turbulent flames exist, caused by high pressure pulses, shock waves and etc. For the simulation of such processes a reliable numerical codes are needed. Despite flame acceleration being largely studied for homogeneous hydrogen - air mixtures, there are still unresolved issues in this research area, e.g., the effect of turbulence level on flame acceleration and quenching. This paper presents simulations of hydrogen deflagration experiments in the ENACCEF facility using ASTEC code, performed in the frames of International Standard Program No. 49 and SARNET2 project. Experiments and simulations were performed with the aim of evaluating the codes' (a number of participants with various codes participated in the project) capabilities to simulate hydrogen combustion. ASTEC code is an integral lumped-parameter approach based nuclear safety analysis code. For the presented simulations, ASTEC modules CPA (containment thermohydromechanics) and FRONT (hydrogen deflagration) were used. Paper present ENACCEF test facility, its nodalisation schemes developed for the calculations, simulated experiments and simulations' results. Brief description of FRONT module is also presented. Calculations' results are compared with experimental results and analyzed. (author)

  11. Critical deflagration waves leading to detonation onset under different boundary conditions

    International Nuclear Information System (INIS)

    Lin Wei; Zhou Jin; Lin Zhi-Yong; Fan Xiao-Hua

    2015-01-01

    High-speed turbulent critical deflagration waves before detonation onset in H 2 –air mixture propagated into a square cross section channel, which was assembled of optional rigid rough, rigid smooth, or flexible walls. The corresponding propagation characteristic and the influence of the wall boundaries on the propagation were investigated via high-speed shadowgraph and a high-frequency pressure sampling system. As a comprehensive supplement to the different walls effect investigation, the effect of porous absorbing walls on the detonation propagation was also investigated via smoke foils and the high-frequency pressure sampling system. Results are as follows. In the critical deflagration stage, the leading shock and the closely following turbulent flame front travel at a speed of nearly half the CJ detonation velocity. In the preheated zone, a zonary flame arises from the overlapping part of the boundary layer and the pressure waves, and then merges into the mainstream flame. Among these wall boundary conditions, the rigid rough wall plays a most positive role in the formation of the zonary flame and thus accelerates the transition of the deflagration to detonation (DDT), which is due to the boost of the boundary layer growth and the pressure wave reflection. Even though the flexible wall is not conducive to the pressure wave reflection, it brings out a faster boundary layer growth, which plays a more significant role in the zonary flame formation. Additionally, the porous absorbing wall absorbs the transverse wave and yields detonation decay and velocity deficit. After the absorbing wall, below some low initial pressure conditions, no re-initiation occurs and the deflagration propagates in critical deflagration for a relatively long distance. (paper)

  12. Potential for a solids fire during an ITP waste tank deflagration and the impact on gas pressure

    International Nuclear Information System (INIS)

    Thomas, J.K.

    1993-07-01

    During the In-Tank Precipitation (ITP) process, solid deposits may form at the water-line on internal waste tank surfaces. These solids may be combustible due to the presence of tetraphenylborate compounds and hence there is a potential that a waste tank deflagration could ignite a solids fire. The work described in this report evaluates the potential for a waste tank deflagration to ignite a solids fire and the subsequent effect on gas pressure. Thermal analyses were performed using a one-dimensional conduction model, radiative heat flux values calculated with the Deflagration Pressure Analysis Code (DPAC), and effective deposit properties calculated from the component properties. It was shown that a solids fire could only be ignited by a waste tank deflagration for a limited range of cases. For the best-estimate mixtures, a solids fire could not be ignited prior to the time the peak gas pressure is reached and would not increase the peak pressure. For the upper-bound mixtures, the thickness of the solid layer which could be ignited is insufficient to increase the energy released by the deflagration by a significant amount. It was also shown that these conclusions are relatively insensitive to uncertainties related to deposit composition. Thus, the contribution from a solids fire to the gas pressure resulting from a waste tank deflagration may be neglected

  13. Peak pressures from hydrogen deflagrations in the PFP thermal stabilization glovebox

    International Nuclear Information System (INIS)

    Van Keuren, J.C.

    1998-01-01

    This document describes the calculations of the peak pressures due to hydrogen deflagrations in the glovebox used for thermal stabilization (glovebox HC-21A) in PFP. Two calculations were performed. The first considered the burning of hydrogen released from a 7 inch Pu can in the Inert Atmosphere Confinement (IAC) section of the glovebox. The peak pressure increase was 12400 Pa (1.8 psi). The second calculation considered burning of the hydrogen from 25 g of plutonium hydride in the airlock leading to the main portion of the glovebox. Since the glovebox door exposes most of the airlock when open, the deflagration was assumed to pressurize the entire glovebox. The peak pressure increase was 3860 Pa (0.56 psi)

  14. Investigations on deflagration to detonation transition in porous energetic materials. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, D.S. [Univ. of Illinois, Urbana, IL (United States)

    1999-07-01

    The research carried out by this contract was part of a larger effort funded by LANL in the areas of deflagration to detonation in porous energetic materials (DDT) and detonation shock dynamics in high explosives (DSD). In the first three years of the contract the major focus was on DDT. However, some researchers were carried out on DSD theory and numerical implementation. In the last two years the principal focus of the contract was on DSD theory and numerical implementation. However, during the second period some work was also carried out on DDT. The paper discusses DDT modeling and DSD modeling. Abstracts are included on the following topics: modeling deflagration to detonation; DSD theory; DSD wave front tracking; and DSD program burn implementation.

  15. Radial magnetic compression in the expelled jet of a plasma deflagration accelerator

    International Nuclear Information System (INIS)

    Loebner, Keith T. K.; Underwood, Thomas C.; Mouratidis, Theodore; Cappelli, Mark A.

    2016-01-01

    A spectroscopic study of a pulsed plasma deflagration accelerator is carried out that confirms the existence of a strong compression in the emerging jet at the exit plane of the device. An imaging spectrometer is used to collect broadened Hα emission from a transaxial slice of the emerging jet at high spatial resolution, and the radial plasma density profile is computed from Voigt fits of the Abel inverted emissivity profiles. The plasma temperature, determined via Doppler broadening of impurity line emission, is compared against the temperature predictions of a radial magnetohydrodynamic equilibrium model applied to the measured density profiles. Empirical scaling laws developed for the plasma density, combined with the measured and predicted temperatures, indicate that a radially equilibrated Z-pinch is formed within the expelled plasma jet at the exit plane during the deflagration process.

  16. Flammable gas deflagration consequence calculations for the tank waste remediation system basis for interim operation

    Energy Technology Data Exchange (ETDEWEB)

    Van Vleet, R.J., Westinghouse Hanford

    1996-08-13

    This paper calculates the radiological dose consequences and the toxic exposures for deflagration accidents at various Tank Waste Remediation System facilities. These will be used in support of the Tank Waste Remediation System Basis for Interim Operation.The attached SD documents the originator`s analysis only. It shall not be used as the final or sole document for effecting changes to an authorization basis or safety basis for a facility or activity.

  17. Non-equilibrium dynamics due to moving deflagration front at RDX/HTPB interface

    Science.gov (United States)

    Chaudhuri, Santanu; Joshi, Kaushik; Lacevic, Naida

    Reactive dissipative particle dynamics (DPD-RX), a promising tool in characterizing the sensitivity and performance of heterogeneous solid propellants like polymer bonded explosives (PSXs), requires further testing for non-equilibrium dynamics. It is important to understand detailed atomistic chemistry for developing coarse grain reactive models needed for the DPD-RX. In order to obtain insights into combustion chemistry of RDX/HTPB binder, we used reactive molecular dynamics (RMD) to obtain energy up-pumping and reaction mechanisms at RDX/HTPB interface when exposed to a self-sustaining deflagration front. Hot spots are ignited near and away from the heterogeneous interface using the thermal pulse. The results show that the hot spot near interface significantly delays the transition from ignition to deflagration. We will present the mechanical response and the combustion chemistry of HTPB when the propagating deflagration front hits the polymer binder. We will discuss our efforts to incorporate this RMD based chemistry into the DPD-RX which will enable us to perform such non-equilibrium dynamics simulations on large-length scale with microstructural heterogeneities. Funding from DTRA Grant Number HDTRA1-15-1-0034 is acknowledged.

  18. Characterization of the pressure field induced by the explosions in air of a hydrocarbon-air mixture with slow deflagration of fast deflagration

    International Nuclear Information System (INIS)

    Garnier, J.L.; Perrot, J.; Brossard, J.; Di Fabio, N.; Lannoy, A.; Desbordes, D.; Leyer, J.C.; Saint-Cloud, J.P.

    1984-11-01

    The present research contract, carried out in the framework of a French working group CEA-EDF-ENSMA, was divided into four phases: 1) Phase 1: Scaling effects on a pressure field generated by spontaneous accelerations of deflagrations in a homogeneous medium: these ''CHARLES'' tests performed on completely unconfined charges of ethylene-air and acetylene-air mixture (V approximately= 12 m 3 ) have demonstrated the high sensitivity of the pressure field to the flame acceleration, particularly at the end of the propagation. 2) Phase 2: Effect of a sudden discontinuity in the concentration of the combustible gas on the deflagration speed in a heterogeneous medium: this discontinuity was obtained using two concentric latex balloons, filled with different hydrocarbon concentrations and also destroyed before firing. 3) Phase 3: Study of pseudo-detonation modes for the explosion of spherical ethylene-air mixtures: these modes were sought by increasing an explosive plastic mass associated to the igniter. 4) Phase 4: Study of the influence of cloud shape, ignition point location and simple obstacles in the flame path on the pressure field generated by the explosion. A retractable enclosure was designed, built and unfortunately destroyed by the second test

  19. Fast Hydrogen-Air Flames for Turbulence Driven Deflagration to Detonation Transition

    Science.gov (United States)

    Chambers, Jessica; Ahmed, Kareem

    2016-11-01

    Flame acceleration to Detonation produces several combustion modes as the Deflagration-to-Detonation Transition (DDT) is initiated, including fast deflagration, auto-ignition, and quasi-detonation. Shock flame interactions and turbulence levels in the reactant mixture drive rapid flame expansion, formation of a leading shockwave and post-shock conditions. An experimental study to characterize the developing shock and flame front behavior of propagating premixed hydrogen-air flames in a square channel is presented. To produce each flame regime, turbulence levels and flame propagation velocity are controlled using perforated plates in several configurations within the experimental facility. High speed optical diagnostics including Schlieren and Particle Image Velocimetry are used to capture the flow field. In-flow pressure measurements acquired post-shock, detail the dynamic changes that occur in the compressed gas directly ahead of the propagating flame. Emphasis on characterizing the turbulent post-shock environment of the various flame regimes helps identify the optimum conditions to initiate the DDT process. The study aims to further the understanding of complex physical mechanisms that drive transient flame conditions for detonation initiation. American Chemical Society.

  20. Deflagration-to-detonation transition in gases in tubes with cavities

    Science.gov (United States)

    Smirnov, N. N.; Nikitin, V. F.; Phylippov, Yu. G.

    2010-12-01

    The existence of a supersonic second combustion mode — detonation — discovered by Mallard and Le Chatelier and by Berthélot and Vieille in 1881 posed the question of mechanisms for transition from one mode to the other. In the period 1959-1969, experiments by Salamandra, Soloukhin, Oppenheim, and their coworkers provided insights into this complex phenomenon. Since then, among all the phenomena related to combustion processes, deflagration-to-detonation transition is, undoubtedly, the most intriguing one. Deflagration-to-detonation transition (DDT) in gases is connected with gas and vapor explosion safety issues. Knowing mechanisms of detonation onset control is of major importance for creating effective mitigation measures addressing two major goals: to prevent DDT in the case of mixture ignition, or to arrest the detonation wave in the case where it has been initiated. A new impetus to the increase in interest in deflagration-to-detonation transition processes was given by the recent development of pulse detonation devices. The probable application of these principles to creation of a new generation of engines put the problem of effectiveness of pulse detonating devices at the top of current research needs. The effectiveness of the pulse detonation cycle turned out to be the key factor characterizing the Pulse Detonation Engine (PDE), whose operation modes were shown to be closely related to periodical onset and degeneration of a detonation wave. Those unsteady-state regimes should be self-sustained to guarantee a reliable operation of devices using the detonation mode of burning fuels as a constitutive part of their working cycle. Thus deflagration-to-detonation transition processes are of major importance for the issue. Minimizing the predetonation length and ensuring stability of the onset of detonation enable one to increase the effectiveness of a PDE. The DDT turned out to be the key factor characterizing the PDE operating cycle. Thus, the problem of

  1. Deflagration of thermite - ammonium nitrate based propellant mixture

    Science.gov (United States)

    Duraes, Luisa; Morgado, Joel; Portugal, Antonio; Campos, Jose

    2001-06-01

    Reaction between iron oxide (Fe2O3) and aluminum (Al) is the reference of the classic thermite compositions. The efficency of the reaction, for a given initial composition of Fe2O3 and Al, is evaluated by the final temperature and by the mass ratio of Al2O3 /AlO in products of combustion (in condensed phase). In order to increase pressure in products of thermite reaction, the original composition is mixed, with an original twin screw extruder, with a propellant binder composed of ammonium and sodium nitrates, initialy solved in formamide (CH3NO) and mixed with a polyurethane solution. The products of combustion and pyrolysis of this binder, reacting with thermite products, generates high pressure and high temperature conditions. These experimental conditions are also predicted using THOR code. The study presents DSC and TGA results of components and mixtures, and correlates them to the ignition phenomena and reaction properties. The regression rate of combustion and final attained temperature and pressure, in a closed confinement, as a function of composition of thermite components/propellant binder, are presented and discussed. They show the influence of gaseous combustion and pyrolysis products of binder in final reaction.

  2. Characterization of the pressure field induced by the explosion in air of a hydrocarbon-air a mixture with slow deflagration or fast deflagration

    International Nuclear Information System (INIS)

    Brossard, J.; Desbordes, D.; Leyer, J.C.; Saint-Cloud, J.P.; Di Fabio, N.; Lannoy, A.

    1985-01-01

    The protection of nuclear power plants against external explosions of hydrocarbons more particularly, originating, e.g. in transportation accidents, as a relevant topic of nuclear safety studies. The present research contract has been carried out in the framework of a French working group CEA-EDF-ENSMA. The ''Charles'' tests performed on completely unconfined charges of ethylene-air and acetylene-air mixtures (V approximately equal 12 m 3 ) have demonstrated the high sensitivity of the pressure field to the flame acceleration, particularly at the end of the propagation. The effect of a sudden discontinuity in the concentration of the combustible gas on the deflagration speed in a heterogeneous medium has been studied: this discontinuity was obtained using two concentric latex balloons, filled with different hydrocarbon concentrations and also destroyed before firing. The pseudo-detonation modes for the explosion of spherical ethylene-air mixtures, modes sought by increasing an explosive plastic mass associated to the igniter, have also been studied. The influence of cloud shape and ignition point location on the pressure field generated by the explosion has been tested finally

  3. CFD simulations for premixed hydrogen-air deflagration from a vented chamber

    International Nuclear Information System (INIS)

    Gera, B.; Ganju, S.

    2015-01-01

    In water cooled power reactors, significant quantities of hydrogen could be produced by a steam-zirconium (fuel clad) reaction following a postulated loss-of-coolant accident (LOCA) along with non-availability of Emergency Core Cooling System (ECCS). Hydrogen in air has the potential for uncontrolled combustion, which has given rise to public concern over the years. The generated hydrogen gets distributed in the different compartment of nuclear reactor containment and may form combustible mixture. Hence, various experimental activities have been performed around the world to investigate severe accident phenomena related to hydrogen combustion. Recently, with the rising concerns for local hydrogen control, numerical calculations for space resolved hydrogen distribution and combustion in the compartment have become an important requirement. Considering all these issues computations have been performed using commercial CFD code CFDACE+ for deflagration of lean dry hydrogen air mixture for a reported experiment. The paper describes the modelling details and main results of the investigation and comparison with experiments

  4. A study on hydrogen deflagration for selected severe accident sequences in Ringhals 3

    Energy Technology Data Exchange (ETDEWEB)

    Gustavsson, V.; Moeller, E. [SwedPower AB (Sweden)

    2002-01-01

    In this report, we have investigated the most important severe accident sequences in Ringhals 3, a Westinghouse 3-loop PWR, concerning hydrogen generation and containment pressure at hydrogen deflagration. In order to analyze the accident sequences and to calculate the hydrogen production, the computer code MAAP (Modular Accident Analysis Program) was used. Six accident sequences were studied, where four were LOCA cases and two transients. MAAP gives the evolution of the accident and particularly the pressure in the containment and the production of hydrogen as a function of time. The pressure peaks at deflagration were calculated by the method AICC-Adiabatic Isochoric Complete Combustion. The results from these calculations are conservative for two reasons. Adiabatic combustion means that the heat losses to structures in the containment are neglected. The combustion is also assumed to occur once and all available hydrogen is burned. The maximum pressure in five analysed cases was compared with the failure pressure of the containment. In the LOCA case, 373 kg hydrogen was burned and the resulting peak pressure in the containment was 0,53 MPa. In the transient, where 720 kg hydrogen was burned, the peak pressure was 0,69 MPa. This is the same as the failure pressure of the containment. Finally, in the conservative case, 980 kg hydrogen was burned and the resulting peak pressure 0,96 MPa. However, it should be noted that these conclusions are conservative from two points of view. Firstly a more realistic (than AICC) calculation of the peak pressure would give a lower value than 0,69 MPa. Secondly, there is conservatism in the evaluation of the failure pressure. (au)

  5. Further analysis of the FRONT model in ASTEC by simulating the hydrogen deflagration experiment BMC Ix9

    International Nuclear Information System (INIS)

    Braehler, Thimo; Koch, Marco K.

    2011-01-01

    Effects of possible hydrogen deflagration like pressure built up and temperature increase can become important for the evaluation of late phases in loss of coolant accidents. In this compact the simulation of the hydrogen deflagration test BMC Ix9 with the FRONT model of the integral lumped-parameter-code ASTEC is treated. This model is available since mid of 2009, released with ASTEC V2.0. To check the validity of the model related to the applicability on different phenomena, a large number of simulations are necessary. The model was used by RUB in the frame of the 'International Standard Problem on Hydrogen Combustion (ISP-49)' and within the EC NoE SARNET2. It has been concluded that the model is able to simulate a broad range of hydrogen deflagration phenomena under different experimental conditions. Experiments analysed in the mentioned benchmarks are characterised by flame propagation in vertical direction. Moreover there were no considerations of flame propagation in multi compartment geometries. In the BMC Ix9 test horizontal hydrogen deflagration with flame propagation in 3 rooms was investigated. The FRONT model was already validated on the BMC Hx23 experiment with sufficient results. In comparison to this test the number of compartments and the initial gas composition, like hydrogen and steam concentration differs from the BMC Ix9 experiment. Previous investigations of RUB showed that the modelling of turbulence related to the transport between different compartment and the determination of this quantity has a strong influence on the simulation results. In the following the FRONT model is described briefly, the simulation results are discussed and a first recommendation for the nodalisation is given. (orig.)

  6. Influence of ignition energy, ignition location, and stoichiometry on the deflagration-to-detonation distance in a Pulse Detonation Engine

    OpenAIRE

    Robinson, John P.

    2000-01-01

    The feasibility of utilizing detonations for air-breathing propulsion is the subject of a significant research effort headed by the Office of Naval Research. Pulse Detonation Engines (PDE) have a theoretically greater efficiency than current combustion cycles. However, pulse detonation technology must mature beginning with research in the fundamental process of developing a detonation wave. This thesis explores various ignition conditions which minimize the deflagration-to- detonation transit...

  7. Frequency of deflagration in the in-tank precipitation process tanks due to loss of nitrogen purge system

    International Nuclear Information System (INIS)

    Jansen, J.M.; Mason, C.L.; Olsen, L.M.; Shapiro, B.J.; Gupta, M.K.; Britt, T.E.

    1994-01-01

    High-level liquid wastes (HLLW) from the processing of nuclear material at the Savannah River Site (SRS) are stored in large tanks in the F- and H-Area tank farms. The In-Tank Precipitation (ITP) process is one step in the processing and disposal of HLLW. The process hazards review for the ITP identified the need to implement provisions that minimize deflagration/explosion hazards associated with the process. The objective of this analysis is to determine the frequency of a deflagration in Tank 48 and/or 49 due to nitrogen purge system failures (including external events) and coincident ignition source. A fault tree of the nitrogen purge system coupled with ignition source probability is used to identify dominant system failures that contribute to the frequency of deflagration. These system failures are then used in the recovery analysis. Several human actions, recovery actions, and repair activities are identified that reduce total frequency. The actions are analyzed and quantified as part of a Human Reliability Analysis (HRA). The probabilities of failure of these actions are applied to the fault tree cutsets and the event trees

  8. The Peculiar SN 2005hk: Do Some Type Ia Supernovae Explode As Deflagrations?

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, M.M.; Li, W.; Frieman, J.A.; Blinnikov, S.I.; DePoy, D.; Prieto, J.L.; Milne, P.; Contreras, C.; Folatelli, Gaston; Morrell, N.; Hamuy, M.; Suntzeff, N.B.; Roth, M.; Gonzalez, S.; Krzeminski, W.; Filippenko, A.V.; Freedman, W.L.; Chornock, R.; Jha, S.; Madore, B.F.; Persson, S.E.; /Las Campanas Observ. /UC, Berkeley, Astron. Dept.

    2006-11-14

    We present extensive u{prime}g{prime}r{prime}i{prime} BV RIY JHK{sub s} photometry and optical spectroscopy of SN 2005hk. These data reveal that SN 2005hk was nearly identical in its observed properties to SN 2002cx, which has been called 'the most peculiar known type Ia supernova'. Both supernovae exhibited high ionization SN 1991T-like pre-maximum spectra, yet low peak luminosities like SN 1991bg. The spectra reveal that SN 2005hk, like SN 2002cx, exhibited expansion velocities that were roughly half those of typical type Ia supernovae. The R and I light curves of both supernovae were also peculiar in not displaying the secondary maximum observed for normal type Ia supernovae. Our Y JH photometry of SN 2005hk reveals the same peculiarity in the near-infrared. By combining our optical and near-infrared photometry of SN 2005hk with published ultraviolet light curves obtained with the Swift satellite, we are able to construct a bolometric light curve from {approx} 10 days before to {approx}60 days after B maximum. The shape and unusually low peak luminosity of this light curve, plus the low expansion velocities and absence of a secondary maximum at red and near-infrared wavelengths, are all in reasonable agreement with model calculations of a 3D deflagration which produces {approx} 0.25 M{sub {circle_dot}} of {sup 56}Ni.

  9. The development of laser ignited deflagration-to-detonation transition (DDT) detonators and pyrotechnic actuators

    Energy Technology Data Exchange (ETDEWEB)

    Merson, J.A.; Salas, F.J.; Harlan, J.G.

    1993-11-01

    The use of laser ignited explosive components has been recognized as a safety enhancement over existing electrical explosive devices (EEDs). Sandia has been pursuing the development of optical ordnance for many years with recent emphasis on developing optical deflagration-to-detonation (DDT) detonators and pyrotechnic actuators. These low energy optical ordnance devices can be ignited with either a semiconductor diode laser, laser diode arrays or a solid state rod laser. By using a semiconductor laser diode, the safety improvement can be made without sacrificing performance since the input energy required for the laser diode and the explosive output are similar to existing electrical systems. The use of higher powered laser diode arrays or rod lasers may have advantages in fast DDT applications or lossy optical environments such as long fiber applications and applications with numerous optical connectors. Recent results from our continued study of optical ignition of explosive and pyrotechnic materials are presented. These areas of investigation can be separated into three different margin categories: (1) the margin relative to intended inputs (i.e. powder performance as a function of laser input variation), (2) the margin relative to anticipated environments (i.e. powder performance as a function of thermal environment variation), and (3) the margin relative to unintended environments (i.e. responses to abnormal environments or safety).

  10. Simulation of hydrogen deflagration experiment – Benchmark exercise with lumped-parameter codes

    Energy Technology Data Exchange (ETDEWEB)

    Kljenak, Ivo, E-mail: ivo.kljenak@ijs.si [Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); Kuznetsov, Mikhail, E-mail: mike.kuznetsov@kit.edu [Karlsruhe Institute of Technology, Kaiserstraße 12, 76131 Karlsruhe (Germany); Kostka, Pal, E-mail: kostka@nubiki.hu [NUBIKI Nuclear Safety Research Institute, Konkoly-Thege Miklós út 29-33, 1121 Budapest (Hungary); Kubišova, Lubica, E-mail: lubica.kubisova@ujd.gov.sk [Nuclear Regulatory Authority of the Slovak Republic, Bajkalská 27, 82007 Bratislava (Slovakia); Maltsev, Mikhail, E-mail: maltsev_MB@aep.ru [JSC Atomenergoproekt, 1, st. Podolskykh Kursantov, Moscow (Russian Federation); Manzini, Giovanni, E-mail: giovanni.manzini@rse-web.it [Ricerca sul Sistema Energetico, Via Rubattino 54, 20134 Milano (Italy); Povilaitis, Mantas, E-mail: mantas.p@mail.lei.lt [Lithuania Energy Institute, Breslaujos g.3, 44403 Kaunas (Lithuania)

    2015-03-15

    Highlights: • Blind and open simulations of hydrogen combustion experiment in large-scale containment-like facility with different lumped-parameter codes. • Simulation of axial as well as radial flame propagation. • Confirmation of adequacy of lumped-parameter codes for safety analyses of actual nuclear power plants. - Abstract: An experiment on hydrogen deflagration (Upward Flame Propagation Experiment – UFPE) was proposed by the Jozef Stefan Institute (Slovenia) and performed in the HYKA A2 facility at the Karlsruhe Institute of Technology (Germany). The experimental results were used to organize a benchmark exercise for lumped-parameter codes. Six organizations (JSI, AEP, LEI, NUBIKI, RSE and UJD SR) participated in the benchmark exercise, using altogether four different computer codes: ANGAR, ASTEC, COCOSYS and ECART. Both blind and open simulations were performed. In general, all the codes provided satisfactory results of the pressure increase, whereas the results of the temperature show a wider dispersal. Concerning the flame axial and radial velocities, the results may be considered satisfactory, given the inherent simplification of the lumped-parameter description compared to the local instantaneous description.

  11. First-Principles Petascale Simulations for Predicting Deflagration to Detonation Transition in Hydrogen-Oxygen Mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Khokhlov, Alexei [Univ. of Chicago, IL (United States). Dept. of Astronomy and Astrophysics. Enrico Fermi Inst.; Austin, Joanna [Argonne National Lab. (ANL), Argonne, IL (United States). Argonne Leadership Computing Facility; Bacon, C. [Univ. of Illinois, Urbana, IL (United States). Dept. of Aerospace Engineering

    2015-03-02

    Hydrogen has emerged as an important fuel across a range of industries as a means of achieving energy independence and to reduce emissions. DDT and the resulting detonation waves in hydrogen-oxygen can have especially catastrophic consequences in a variety of industrial and energy producing settings related to hydrogen. First-principles numerical simulations of flame acceleration and DDT are required for an in-depth understanding of the phenomena and facilitating design of safe hydrogen systems. The goals of this project were (1) to develop first-principles petascale reactive flow Navier-Stokes simulation code for predicting gaseous high-speed combustion and detonation (HSCD) phenomena and (2) demonstrate feasibility of first-principles simulations of rapid flame acceleration and deflagration-to-detonation transition (DDT) in stoichiometric hydrogen-oxygen mixture (2H2 + O2). The goals of the project have been accomplished. We have developed a novel numerical simulation code, named HSCD, for performing first-principles direct numerical simulations of high-speed hydrogen combustion. We carried out a series of validating numerical simulations of inert and reactive shock reflection experiments in shock tubes. We then performed a pilot numerical simulation of flame acceleration in a long pipe. The simulation showed the transition of the rapidly accelerating flame into a detonation. The DDT simulations were performed using BG/Q Mira at the Argonne National Laboratory, currently the fourth fastest super-computer in the world.

  12. Simulation of hydrogen deflagration and detonation in a BWR reactor building

    International Nuclear Information System (INIS)

    Manninen, M.; Silde, A.; Lindholm, I.; Huhtanen, R.; Sjoevall, H.

    2002-01-01

    A systematic study was carried out to investigate the hydrogen behaviour in a BWR reactor building during a severe accident. BWR core contains a large amount of Zircaloy and the containment is relatively small. Because containment leakage cannot be totally excluded, hydrogen can build up in the reactor building, where the atmosphere is normal air. The objective of the work was to investigate, whether hydrogen can form flammable and detonable mixtures in the reactor building, evaluate the possibility of onset of detonation and assess the pressure loads under detonation conditions. The safety concern is, whether the hydrogen in the reactor building can detonate and whether the external detonation can jeopardize the containment integrity. The analysis indicated that the possibility of flame acceleration and deflagration-to-detonation transition (DDT) in the reactor building could not be ruled out in case of a 20 mm 2 leakage from the containment. The detonation analyses indicated that maximum pressure spike of about 7 MPa was observed in the reactor building room selected for the analysis

  13. Measurement of the flow properties within a copper tube containing a deflagrating explosive

    Energy Technology Data Exchange (ETDEWEB)

    Hill, Larry G [Los Alamos National Laboratory; Morris, John S [Los Alamos National Laboratory; Jackson, Scott I [Los Alamos National Laboratory

    2009-01-01

    We report on the propagation of deflagration waves in the high explosive (HE) PBX 9501 (95 wt % HMX, 5 wt% binder). Our test configuration, which we call the def1agration cylinder test (DFCT), is fashioned after the detonation cylinder test (DTCT) that is used to calibrate the JWL detonation product equation of state (EOS). In the DFCT, the HE is heated to a uniform slightly subcritical temperature, and is ignited at one end by a hot wire. For some configurations and initial conditions, we observe a quasi-steady wave that flares the tube into a funnel shape, stretching it to the point of rupture. This behavior is qualitatively like the DTCT, such that, by invoking certain additional approximations that we discuss, its behavior can be analyzed by the same methods. We employ an analysis proposed by G.I. Taylor to infer the pressure-volume curve for the burning, expanding flow. By comparing this result to the EOS of HMX product gas alone. we infer that only {approx}20 wt% of the HMX has burned at tube rupture. This result confirms pre-existing observations about the role of convective burning in HMX cookoff explosions.

  14. Simulation of hydrogen deflagration experiment – Benchmark exercise with lumped-parameter codes

    International Nuclear Information System (INIS)

    Kljenak, Ivo; Kuznetsov, Mikhail; Kostka, Pal; Kubišova, Lubica; Maltsev, Mikhail; Manzini, Giovanni; Povilaitis, Mantas

    2015-01-01

    Highlights: • Blind and open simulations of hydrogen combustion experiment in large-scale containment-like facility with different lumped-parameter codes. • Simulation of axial as well as radial flame propagation. • Confirmation of adequacy of lumped-parameter codes for safety analyses of actual nuclear power plants. - Abstract: An experiment on hydrogen deflagration (Upward Flame Propagation Experiment – UFPE) was proposed by the Jozef Stefan Institute (Slovenia) and performed in the HYKA A2 facility at the Karlsruhe Institute of Technology (Germany). The experimental results were used to organize a benchmark exercise for lumped-parameter codes. Six organizations (JSI, AEP, LEI, NUBIKI, RSE and UJD SR) participated in the benchmark exercise, using altogether four different computer codes: ANGAR, ASTEC, COCOSYS and ECART. Both blind and open simulations were performed. In general, all the codes provided satisfactory results of the pressure increase, whereas the results of the temperature show a wider dispersal. Concerning the flame axial and radial velocities, the results may be considered satisfactory, given the inherent simplification of the lumped-parameter description compared to the local instantaneous description

  15. Comparison of Bacillus atrophaeus spore viability following exposure to detonation of C4 and to deflagration of halogen-containing thermites

    Science.gov (United States)

    Tringe, J. W.; Létant, S. E.; Dugan, L. C.; Levie, H. W.; Kuhl, A. L.; Murphy, G. A.; Alves, S. W.; Vandersall, K. S.; Pantoya, M. L.

    2013-12-01

    Energetic materials are being considered for the neutralization of spore-forming bacteria. In this study, the neutralization effects of a monomolecular explosive were compared to the effects of halogen-containing thermites. Bacillus atrophaeus spores were exposed to the post-detonation environment of a 100 g charge of the military explosive C-4 at a range of 50 cm. These tests were performed in the thermodynamically closed environment of a 506-l barometric calorimeter. Associated temperatures were calculated using a thermodynamic model informed by calculations with the Cheetah thermochemical code. Temperatures in the range of 2300-2800 K were calculated to persist for nearly the full 4 ms pressure observation time. After the detonation event, spores were characterized using optical microscopy and the number of viable spores was assessed. Results showed live spore survival rates in the range of 0.01%-1%. For the thermite tests, a similar, smaller-scale configuration was employed that examined the spore neutralization effects of two thermites: aluminum with iodine pentoxide and aluminum with potassium chlorate. Only the former mixture resulted in spore neutralization. These results indicate that the detonation environment produced by an explosive with no chemical biocides may provide effective spore neutralization similar to a deflagrating thermite containing iodine.

  16. Status report on the deflagration/detonation transition in the three-phase diagram hydrogen/air/steam according to Shapiro/Moffette

    International Nuclear Information System (INIS)

    Mayinger, F.; Strube, G.; Beauvais, R.

    1988-01-01

    On the basis of a bibliographic study, the present level of knowledge about the combustion of hydrogen/air/steam mixtures, in particular, knowledge about transition from deflagration to detonation (DDT) is recorded. The numerical calculation of combustion processes produces good results; at present, however, a comprehensive simulation of highly turbulent flames is not yet possible. A consistent model for DDT based on the instability of highly turbulent flame fronts with high spreading rates is capable of explaining the transitions to detonation found in a diversity of test arrangements. At the same time, the same model provides a criterion with which conservative limits for DDT can be determined in the three-component diagram. It is extremely difficult to give a reliable estimate of the situation of H 2 in hypothetical developments of heavy core meltdown accidents with the help of the limits found. All that can be said at present is that danger originating from hydrogen can only arise after concrete melt interaction has taken place. In this case, DDT cannot be precluded, at least in some compartments of the safety vessel. (orig.) [de

  17. Comparison of Bacillus atrophaeus spore viability following exposure to detonation of C4 and to deflagration of halogen-containing thermites

    International Nuclear Information System (INIS)

    Tringe, J. W.; Létant, S. E.; Dugan, L. C.; Levie, H. W.; Kuhl, A. L.; Murphy, G. A.; Alves, S. W.; Vandersall, K. S.; Pantoya, M. L.

    2013-01-01

    Energetic materials are being considered for the neutralization of spore-forming bacteria. In this study, the neutralization effects of a monomolecular explosive were compared to the effects of halogen-containing thermites. Bacillus atrophaeus spores were exposed to the post-detonation environment of a 100 g charge of the military explosive C-4 at a range of 50 cm. These tests were performed in the thermodynamically closed environment of a 506-l barometric calorimeter. Associated temperatures were calculated using a thermodynamic model informed by calculations with the Cheetah thermochemical code. Temperatures in the range of 2300–2800 K were calculated to persist for nearly the full 4 ms pressure observation time. After the detonation event, spores were characterized using optical microscopy and the number of viable spores was assessed. Results showed live spore survival rates in the range of 0.01%–1%. For the thermite tests, a similar, smaller-scale configuration was employed that examined the spore neutralization effects of two thermites: aluminum with iodine pentoxide and aluminum with potassium chlorate. Only the former mixture resulted in spore neutralization. These results indicate that the detonation environment produced by an explosive with no chemical biocides may provide effective spore neutralization similar to a deflagrating thermite containing iodine

  18. Comparison of Bacillus atrophaeus spore viability following exposure to detonation of C4 and to deflagration of halogen-containing thermites

    Energy Technology Data Exchange (ETDEWEB)

    Tringe, J. W.; Létant, S. E.; Dugan, L. C.; Levie, H. W.; Kuhl, A. L.; Murphy, G. A.; Alves, S. W.; Vandersall, K. S. [Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California 94550 (United States); Pantoya, M. L. [Mechanical Engineering Department, Texas Tech University, Lubbock, Texas 79409 (United States)

    2013-12-21

    Energetic materials are being considered for the neutralization of spore-forming bacteria. In this study, the neutralization effects of a monomolecular explosive were compared to the effects of halogen-containing thermites. Bacillus atrophaeus spores were exposed to the post-detonation environment of a 100 g charge of the military explosive C-4 at a range of 50 cm. These tests were performed in the thermodynamically closed environment of a 506-l barometric calorimeter. Associated temperatures were calculated using a thermodynamic model informed by calculations with the Cheetah thermochemical code. Temperatures in the range of 2300–2800 K were calculated to persist for nearly the full 4 ms pressure observation time. After the detonation event, spores were characterized using optical microscopy and the number of viable spores was assessed. Results showed live spore survival rates in the range of 0.01%–1%. For the thermite tests, a similar, smaller-scale configuration was employed that examined the spore neutralization effects of two thermites: aluminum with iodine pentoxide and aluminum with potassium chlorate. Only the former mixture resulted in spore neutralization. These results indicate that the detonation environment produced by an explosive with no chemical biocides may provide effective spore neutralization similar to a deflagrating thermite containing iodine.

  19. The influence of initial temperature on flame acceleration and deflagration-to-detonation transition

    International Nuclear Information System (INIS)

    Ciccarelli, G.; Boccio, J.L.; Ginsberg, T.

    1996-01-01

    The influence of initial mixture temperature on deflagration-to-detonation transition (DDT) has been investigated experimentally. The experiments were carried out in a 27-cm-inner diameter, 21.3-meter-long heated detonation tube, which was equipped with periodic orifice plates to promote flame acceleration. Hydrogen-air-steam mixtures were tested at a range of temperatures up to 650K and at an initial pressure of 0.1 MPa. In most cases, the limiting hydrogen mole fraction which resulted in transition to detonation corresponded to the mixture whose detonation cell size, λ, was approximately equal to the inner diameter of the orifice plate, d (e.g., d/λ∼1). The only exception was in dry hydrogen-air mixtures at 650K where the DDT limit was observed to be 11 percent hydrogen, corresponding to a value of d/λ equal to 5.5. For a 10.5 percent hydrogen mixture at 650K, the flame accelerated to a maximum velocity of about 120 m/s and then decelerated to below 2 m/s. This observation indicates that the d/λ = 1 DDT limit criterion provides a necessary condition but not a sufficient one for the onset of DDT in obstacle-laden ducts. In this particular case, the mixture initial condition (i.e., temperature) resulted in the inability of the mixture to sustain flame acceleration to the point where DDT could occur. It was also observed that the distance required for the flame to accelerate to the onset of detonation was a function of both the hydrogen mole fraction and the mixture initial temperature. For example, decreasing the hydrogen mole fraction or increasing the initial mixture temperature resulted in longer transition distances

  20. The role of CFD combustion modelling in hydrogen safety management – VI: Validation for slow deflagration in homogeneous hydrogen-air-steam experiments

    Energy Technology Data Exchange (ETDEWEB)

    Cutrono Rakhimov, A., E-mail: cutrono@nrg.eu [Nuclear Research and Consultancy Group (NRG), Westerduinweg 3, 1755 ZG Petten (Netherlands); Visser, D.C., E-mail: visser@nrg.eu [Nuclear Research and Consultancy Group (NRG), Westerduinweg 3, 1755 ZG Petten (Netherlands); Holler, T., E-mail: tadej.holler@ijs.si [Jožef Stefan Institute (JSI), Jamova cesta 39, 1000 Ljubljana (Slovenia); Komen, E.M.J., E-mail: komen@nrg.eu [Nuclear Research and Consultancy Group (NRG), Westerduinweg 3, 1755 ZG Petten (Netherlands)

    2017-01-15

    Highlights: • Deflagration of hydrogen-air-steam homogeneous mixtures is modeled in a medium-scale containment. • Adaptive mesh refinement is applied on flame front positions. • Steam effect influence on combustion modeling capabilities is investigated. • Mean pressure rise is predicted with 18% under-prediction when steam is involved. • Peak pressure is evaluated with 5% accuracy when steam is involved. - Abstract: Large quantities of hydrogen can be generated during a severe accident in a water-cooled nuclear reactor. When released in the containment, the hydrogen can create a potential deflagration risk. The dynamic pressure loads resulting from hydrogen combustion can be detrimental to the structural integrity of the reactor. Therefore, accurate prediction of these pressure loads is an important safety issue. In previous papers, we validated a Computational Fluid Dynamics (CFD) based method to determine the pressure loads from a fast deflagration. The combustion model applied in the CFD method is based on the Turbulent Flame Speed Closure (TFC). In our last paper, we presented the extension of this combustion model, Extended Turbulent Flame Speed Closure (ETFC), and its validation against hydrogen deflagration experiments in the slow deflagration regime. During a severe accident, cooling water will enter the containment as steam. Therefore, the effect of steam on hydrogen deflagration is important to capture in a CFD model. The primary objectives of the present paper are to further validate the TFC and ETFC combustion models, and investigate their capability to predict the effect of steam. The peak pressures, the trends of the flame velocity, and the pressure rise with an increase in the initial steam dilution are captured reasonably well by both combustion models. In addition, the ETFC model appeared to be more robust to mesh resolution changes. The mean pressure rise is evaluated with 18% under-prediction and the peak pressure is evaluated with 5

  1. Overview of Battelle-Europe experiments and model development on H2-deflagrations, igniter and catalytic device verifications

    International Nuclear Information System (INIS)

    Wolf, L.; Kanzleiter, T.; Behrens, U.; Langer, G.; Fischer, K.; Holzbauer, H.; Seidler, M.; Wolff, U.

    1991-01-01

    The design and implementation of an optimal mitigation strategy against the potential threat by H 2 -deflagrations/detonations in the aftermath of least probable severe accidents necessitates a knowledge base about these phenomena for representative conditions and realistic geometries. In order to extend existing know-how into the area of multi-compartment geometries connected by vents, the German Ministry of Research and Technology (BMFT) initiated in 1987 and fully sponsored since 1988 a multi-faceted experimental research program on H 2 -deflagrations and related issues in multi-compartment geometries in the Battelle Model Containment (BMC). The following test groups constitute the Battelle-program: Test Group H: basic tests in H 2 -air and H 2 -steam air-mixtures; Test Group I: (sponsored by industry): supplemental tests in H 2 -air and H 2 -steam-air atmospheres; Test Group G: efficiency of H 2 -mitigative measures such as igniters, catalyst modules and combinations thereof. Thus far, a total of 70 experiments have been performed and evaluated. The paper gives an overview of the Battelle-program by reviewing the examined geometries, bandwidths of tested H 2 -concentrations, steam concentrations, ignition locations, specific atmospheric conditions (homogeneous, stratified) and other important parameters varied during and among the different test groups H, G, and I. Some experimental findings are reported

  2. The effect of initial temperature on flame acceleration and deflagration-to-detonation transition phenomenon

    International Nuclear Information System (INIS)

    Ciccarelli, G.; Boccio, J.L.; Ginsberg, T.; Finfrock, C.; Gerlach, L.; Tagawa, H.; Malliakos, A.

    1998-05-01

    The High-Temperature Combustion Facility at BNL was used to conduct deflagration-to-detonation transition (DDT) experiments. Periodic orifice plates were installed inside the entire length of the detonation tube in order to promote flame acceleration. The orifice plates are 27.3-cm-outer diameter, which is equivalent to the inner diameter of the tube, and 20.6-cm-inner diameter. The detonation tube length is 21.3-meters long, and the spacing of the orifice plates is one tube diameter. A standard automobile diesel engine glow plug was used to ignite the test mixture at one end of the tube. Hydrogen-air-steam mixtures were tested at a range of temperatures up to 650K and at an initial pressure of 0.1 MPa. In most cases, the limiting hydrogen mole fraction which resulted in DDT corresponded to the mixture whose detonation cell size, λ, was equal to the inner diameter of the orifice plate, d (e.g., d/λ=1). The only exception was in the dry hydrogen-air mixtures at 650K where the DDT limit was observed to be 11 percent hydrogen, corresponding to a value of d/λ equal to 5.5. For a 10.5 percent hydrogen mixture at 650K, the flame accelerated to a maximum velocity of about 120 mIs and then decelerated to below 2 mIs. By maintaining the first 6.1 meters of the vessel at the ignition end at 400K, and the rest of the vessel at 650K, the DDT limit was reduced to 9.5 percent hydrogen (d/λ=4.2). This observation indicates that the d/λ=1 DDT limit criteria provides a necessary condition but not a sufficient one for the onset of DDT in obstacle laden ducts. In this particular case, the mixture initial condition (i.e., temperature) resulted in the inability of the mixture to sustain flame acceleration to the point where DDT could occur. It was also observed that the distance required for the flame to accelerate to the point of detonation initiation, referred to as the run-up distance, was found to be a function of both the hydrogen mole fraction and the mixture initial

  3. Scaling effects on H2-deflagration in containment-geometries - BASSIM. Further development and verification. Final report

    International Nuclear Information System (INIS)

    Rastogi, A.K.; Wennerberg, D.; Fischer, K.

    1998-01-01

    A multidimensional mechanistic calculation procedure for simulating H 2 -deflagration in multiroom geometries was developed at Battelle in a previous project. This calculation method was verified against a number of experiments performed in BMC (Battelle Model Containment) and HDR (Heissdampf Reaktor) facilities. It turned out that the above mentioned procedure overpredicted the H 2 -burnrates in experiments in smaller facilities and therefore was unable to predict the important 'scaling influences'. It is the purpose of the present work to develop the above mentioned calculation procedure BASSIM-H 2 (mod 2.3) further in order to predict the scaling influences correctly. In the present work the combustion model was developed further such that the important phenomena e.g. ignition phase, quasi-laminar initial phase, and the turbulent phase of a H 2 premixed flame would be modelled realistically. The model developed has been verified against 16 very different experiments from 9 different facilities. The computed cases varied in volumes from 0.022 m 3 up to 2100 m 3 . These cases have also been computed with the older model verified in [15]. Based on the comparison between the computed results obtained with the new model and the computed results obtained with the old model as well as with the experimental data, the model put forward in this work is evaluated. The present model computes the scaling effects on H 2 -deflagration satisfactorily with the same set of empirical constants. The flame propagation in horizontal as well as vertical (both upwards and downwards) directions can be computed satisfactorily. The influence of flow obstructions and heat loss at walls is considered as well. (orig.) [de

  4. The role of CFD combustion modeling in hydrogen safety management – V: Validation for slow deflagrations in homogeneous hydrogen-air experiments

    Energy Technology Data Exchange (ETDEWEB)

    Sathiah, Pratap [Nuclear Research and Consultancy Group (NRG), Westerduinweg 3, 1755 ZG Petten (Netherlands); Holler, Tadej, E-mail: tadej.holler@ijs.si [Jozef Stefan Institute (JSI), Jamova cesta 39, 1000 Ljubljana (Slovenia); Kljenak, Ivo [Jozef Stefan Institute (JSI), Jamova cesta 39, 1000 Ljubljana (Slovenia); Komen, Ed [Nuclear Research and Consultancy Group (NRG), Westerduinweg 3, 1755 ZG Petten (Netherlands)

    2016-12-15

    Highlights: • Validation of the modeling approach for hydrogen deflagration is presented. • Modeling approach is based on two combustion models implemented in ANSYS Fluent. • Experiments with various initial hydrogen concentrations were used for validation. • The effects of heat transfer mechanisms selection were also investigated. • The grid sensitivity analysis was performed as well. - Abstract: The control of hydrogen in the containment is an important safety issue following rapid oxidation of the uncovered reactor core during a severe accident in a Nuclear Power Plant (NPP), because dynamic pressure loads from eventual hydrogen combustion can be detrimental to the structural integrity of the reactor safety systems and the reactor containment. In the set of our previous papers, a CFD-based method to assess the consequence of fast combustion of uniform hydrogen-air mixtures was presented, followed by its validation for hydrogen-air mixtures with diluents and for non-uniform hydrogen-air mixtures. In the present paper, the extension of this model for the slow deflagration regime is presented and validated using the hydrogen deflagration experiments performed in the medium-scale experimental facility THAI. The proposed method is implemented in the CFD software ANSYS Fluent using user defined functions. The paper describes the combustion model and the main results of code validation. It addresses questions regarding turbulence model selection, effect of heat transfer mechanisms, and grid sensitivity, as well as provides insights into the importance of combustion model choice for the slow deflagration regime of hydrogen combustion in medium-scale and large-scale experimental vessels mimicking the NPP containment.

  5. Two-phase modeling of deflagration-to-detonation transition in granular materials: A critical examination of modeling issues

    International Nuclear Information System (INIS)

    Bdzil, J.B.; Menikoff, R.; Son, S.F.; Kapila, A.K.; Stewart, D.S.

    1999-01-01

    The two-phase mixture model developed by Baer and Nunziato (BN) to study the deflagration-to-detonation transition (DDT) in granular explosives is critically reviewed. The continuum-mixture theory foundation of the model is examined, with particular attention paid to the manner in which its constitutive functions are formulated. Connections between the mechanical and energetic phenomena occurring at the scales of the grains, and their manifestations on the continuum averaged scale, are explored. The nature and extent of approximations inherent in formulating the constitutive terms, and their domain of applicability, are clarified. Deficiencies and inconsistencies in the derivation are cited, and improvements suggested. It is emphasized that the entropy inequality constrains but does not uniquely determine the phase interaction terms. The resulting flexibility is exploited to suggest improved forms for the phase interactions. These improved forms better treat the energy associated with the dynamic compaction of the bed and the single-phase limits of the model. Companion papers of this study [Kapila et al., Phys. Fluids 9, 3885 (1997); Kapila et al., in preparation; Son et al., in preparation] examine simpler, reduced models, in which the fine scales of velocity and pressure disequilibrium between the phases allow the corresponding relaxation zones to be treated as discontinuities that need not be resolved in a numerical computation. copyright 1999 American Institute of Physics

  6. On the deflagration-to-detonation transition (DDT) process with added energetic solid particles for pulse detonation engines (PDE)

    Science.gov (United States)

    Nguyen, V. B.; Li, J.; Chang, P.-H.; Phan, Q. T.; Teo, C. J.; Khoo, B. C.

    2018-01-01

    In this paper, numerical simulations are performed to study the dynamics of the deflagration-to-detonation transition (DDT) in pulse detonation engines (PDE) using energetic aluminum particles. The DDT process and detonation wave propagation toward the unburnt hydrogen/air mixture containing solid aluminum particles is numerically studied using the Eulerian-Lagrangian approach. A hybrid numerical methodology combined with appropriate sub-models is used to capture the gas dynamic characteristics, particle behavior, combustion characteristics, and two-way solid-particle-gas flow interactions. In our approach, the gas mixture is expressed in the Eulerian frame of reference, while the solid aluminum particles are tracked in the Lagrangian frame of reference. The implemented computer code is validated using published benchmark problems. The obtained results show that the aluminum particles not only shorten the DDT length but also reduce the DDT time. The improvement of DDT is primarily attributed to the heat released from surface chemical reactions on the aluminum particles. The temperatures associated with the DDT process are greater than the case of non-reacting particles added, with an accompanying rise in the pressure. For an appropriate range of particle volume fraction, particularly in this study, the higher volume fraction of the micro-aluminum particles added in the detonation chamber can lead to more heat energy released and more local instabilities in the combustion process (caused by the local high temperature), thereby resulting in a faster DDT process. In essence, the aluminum particles contribute to the DDT process of successfully transitioning to detonation waves for (failure) cases in which the fuel gas mixture can be either too lean or too rich. With a better understanding of the influence of added aluminum particles on the dynamics of the DDT and detonation process, we can apply it to modify the geometry of the detonation chamber (e.g., the length of

  7. Experimental study on incident wave speed and the mechanisms of deflagration-to-detonation transition in a bent geometry

    Science.gov (United States)

    Li, L.; Li, J.; Teo, C. J.; Chang, P. H.; Khoo, B. C.

    2018-03-01

    The study of deflagration-to-detonation transition (DDT) in bent tubes is important with many potential applications including fuel pipeline and mine tunnel designs for explosion prevention and detonation engines for propulsion. The aim of this study is to exploit low-speed incident shock waves for DDT using an S-shaped geometry and investigate its effectiveness as a DDT enhancement device. Experiments were conducted in a valveless detonation chamber using ethylene-air mixture at room temperature and pressure (303 K, 1 bar). High-speed Schlieren photography was employed to keep track of the wave dynamic evolution. Results showed that waves with velocity as low as 500 m/s can experience a successful DDT process through this S-shaped geometry. To better understand the mechanism, clear images of local explosion processes were captured in either the first curved section or the second curved section depending on the inlet wave velocity, thus proving that this S-shaped tube can act as a two-stage device for DDT. Owing to the curved wall structure, the passing wave was observed to undergo a continuous compression phase which could ignite the local unburnt mixture and finally lead to a local explosion and a detonation transition. Additionally, the phenomenon of shock-vortex interaction near the wave diffraction region was also found to play an important role in the whole process. It was recorded that this interaction could not only result in local head-on reflection of the reflected wave on the wall that could ignite the local mixture, and it could also contribute to the recoupling of the shock-flame complex when a detonation wave is successfully formed in the first curved section.

  8. Investigation into dimethyl cadmium decomposition proceeding in form of deflagration combustion

    International Nuclear Information System (INIS)

    Mikheev, V.S.; Orlov, A.S.

    1987-01-01

    Results of measuring the maximum explosion pressure of dimethyl cadmium CdMet 2 at 0.1 MPa initial pressure and ∼378 K temperature are presented. The investigation was conducted using the method of constant volume bomb-reactor with central ignition. Experimental value of the pressure increase, equalling to 0.46 MPa, agrees with evaluation, based on reaction adiabatic temperature thrmodynamic calculation. The normal burning rate, determined by the pressure increase, equals to 25±8 cm/s

  9. Models and criteria for prediction of Deflagration-to-Detonation Transition (DDT) in hydrogen-air-steam systems under severe accident conditions. Final report

    International Nuclear Information System (INIS)

    Klein, R.; Rehm, W.

    1999-01-01

    The European Commission in Brussels supported a joint project on Deflagration-to-Detonation Transition (DDT) studies for hydrogen safety within the framework programme on nuclear fission safety. The project was initiated by the Forschungszentrum Juelich based on the results of a pilot project. The following main project was coordinated by the Freie Universitaet Berlin involving seven european partners. The partners came from universities, research centers and industry, as follows: FU-Berlin, RWTH-Aachen, CNRS-Marseille, IPSN-Saclay, FZ-Juelich, FZ-Karlsruhe, and NNC-Knutsford, which worked closely together. The working period was two years (1997-1998). The aim of the project was to develop models and criteria for prediction of deflagration-to-detonation transition (DDT) in hydrogen-air-steam systems under severe accident conditions. The results obtained are documented in this final report, which was finished in 1999. The report consists of seven chapters, concerning: - Introduction - Experimental Investigations - Modelling and Numerics - Validation - Mitigation - Further Deliverables - Summary and Conclusion. The final report presents special experimental, theoretical, and computational aspects of the complex DDT phenomena for hydrogen safety studies, and it should be a solid basis for end user applications and further developments. (orig.)

  10. Emission of Gas and Al2O3 Smoke in Gas-Al Particle Deflagration: Experiments and Emission Modeling for Explosive Fireballs

    Science.gov (United States)

    Ranc-Darbord, Isabelle; Baudin, Gérard; Genetier, Marc; Ramel, David; Vasseur, Pierre; Legrand, Julien; Pina, Vincent

    2018-03-01

    Emission of gas and Al2O3 smoke within the deflagration of H2{-}O2-{N2{-}CO2}-Al particles has been studied in a closed combustion chamber at pressures of up to 18 bar and at gas temperatures of up to 3700 K. Measurements of radiance intensity were taken using a five wavelength pyrometer (0.660 μ m, 0.850 μ m, 1.083 μ m, 1.260 μ m, 1.481 μ m) and a grating spectrometer in the range (4.10 μ m to 4.30 μ m). In order to characterize the aluminum oxide smoke size and temperature, an inversion method has been developed based on the radiation transfer equation and using pyrometer measurements and thermochemical calculations of Al2O3 smoke volume fractions. Temperatures in combustion gas have been determined using a method based on the assumed blackbody head of the 4.26 μ m CO2 emission line and on its spectral shift with pressure and temperature. For validation purpose, this method has been applied to measurements obtained when calibrated alumina particles are injected in a combustion chamber prior to gaseous deflagrations. This mathematical inversion method was developed to investigate explosive fireballs.

  11. A study on the hydrogen recombination rates of catalytic recombiners and deliberate ignition

    International Nuclear Information System (INIS)

    Fineschi, F.; Bazzichi, M.; Carcassi, M.

    1994-01-01

    A study is being carried out by the Department of Nuclear and Mechanical Constructions (DCMN) at the University of Pisa on catalytic recombiners and on deliberately induced weak deflagration. The recombination rates of different types of catalytic devices were obtained from a thorough analysis of published experimental data. The main parameter that affects the effectiveness of these devices seems to be the molar density of the deficiency reactant rather than its volumetric concentration. The recombination rate of weak deflagrations in vented compartments has been assessed with experimental tests carried out in a small scale glass vessel. Through a computerized system of analysis of video recordings of the deflagrations, the flame surface and the burned gas volume were obtained as functions of time. Although approximations are inevitable, the method adopted to identify the position of the flame during propagation is more reliable than other non-visual methods (thermocouples and ion-probes). It can only easily be applied to vented weak deflagrations, i.e. when the hydrogen concentration is far from stoichiometric conditions and near to flammability limits, because the pressurization has to be limited due to the low mechanical resistance of the glass. The values of flame surface and burned gas volume were used as inputs for a computer code to calculate the recombining rate, the burning velocity and the pressure transient in the experimental test. The code is being validated with a methodology principally based on a comparison of the measurements of pressure with the calculated values. The research gave some very interesting results on a small scale which should in the future be compared with large scale data

  12. Tangential stretching rate (TSR) analysis of non premixed reactive flows

    KAUST Repository

    Valorani, Mauro

    2016-10-16

    We discuss how the Tangential stretching rate (TSR) analysis, originally developed and tested for spatially homogeneous systems (batch reactors), is extended to spatially non homogeneous systems. To illustrate the effectiveness of the TSR diagnostics, we study the ignition transient in a non premixed, reaction–diffusion model in the mixture fraction space, whose dependent variables are temperature and mixture composition. The reactive mixture considered is syngas/air. A detailed H2/CO mechanism with 12 species and 33 chemical reactions is employed. We will discuss two cases, one involving only kinetics as a model of front propagation purely driven by spontaneous ignition, the other as a model of deflagration wave involving kinetics/diffusion coupling. We explore different aspects of the system dynamics such as the relative role of diffusion and kinetics, the evolution of kinetic eigenvalues, and of the tangential stretching rates computed by accounting for the combined action of diffusion and kinetics as well for kinetics only. We propose criteria based on the TSR concept which allow to identify the most ignitable conditions and to discriminate between spontaneous ignition and deflagration front.

  13. Tangential stretching rate (TSR) analysis of non premixed reactive flows

    KAUST Repository

    Valorani, Mauro; Ciottoli, Pietro Paolo; Galassi, Riccardo Malpica

    2016-01-01

    with 12 species and 33 chemical reactions is employed. We will discuss two cases, one involving only kinetics as a model of front propagation purely driven by spontaneous ignition, the other as a model of deflagration wave involving kinetics

  14. Investigation of hydrogen-deflagration/-detonation

    International Nuclear Information System (INIS)

    Breitung, W.; Redlinger, R.; Werle, H.; Moeschke, M.

    1992-01-01

    The static and dynamic loads of a PWR-containment from hydrogen combustion are investigated theoretically and experimentally. The primary goal is the determination of realistic, not too conservative, upper bounds. The load data are needed to define design requirements for a core-melt resistant containment structure. The following work was performed in 1991: balloon tests; design of a medium scale detonation tube; development of a 1D detonation code; analytical study with SNL/Albuquerque, USA and documentation and presentation of results. (orig./DG)

  15. Venting of gas deflagrations through relief pipes

    OpenAIRE

    Ferrara, Gabriele

    2006-01-01

    Vent devices for gas and dust explosions are often ducted to safety locations by means of relief pipes for the discharge of hot combustion products or blast waves (NFPA 68, 2002). The presence of the duct is likely to increase the severity of the explosion with respect to simply vented vessels posing a problem for the proper design of this venting configuration. The phenomenology of the vented explosion is complicated as the interaction of combustion in the duct with primary combustion in...

  16. Ratings Revisited

    DEFF Research Database (Denmark)

    Lai, Signe Sophus

    2015-01-01

    tværs af medier og platforme, forskudt i tid og on-demand. This article focuses on audience ratings, which have functioned as the central ‘currency’ informing the media trade. It discusses changes to the production and accuracy of audience ratings at a time when established standards are being...

  17. Streamflow ratings

    Science.gov (United States)

    Holmes, Robert R.; Singh, Vijay P.

    2016-01-01

    Autonomous direct determination of a continuous time series of streamflow is not economically feasible at present (2014). As such, surrogates are used to derive a continuous time series of streamflow. The derivation process entails developing a streamflow rating, which can range from a simple, single-valued relation between stage and streamflow to a fully dynamic one-dimensional model based on hydraulics of the flow.

  18. Effect of the new C-12(alpha, gamma)O-16 rate on the chemical evolution of the solar neighborhood

    International Nuclear Information System (INIS)

    Matteucci, F.

    1986-01-01

    New models of chemical evolution of the solar neighborhood have been computed by taking into account the effect of the revised rate of the C-12(alpha, gamma)O-16 reaction on the chemical yields from massive stars, together with the yields from low- and intermediate-mass stars which also include those from Type I supernova explosions (C-deflagration in white dwarfs). In particular, the evolution of C-12, N-14, O-16, Ne-20, Mg-24, Si-28, and Fe-56 has been followed in detail, and their predicted solar absolute abundances as well as their relative ratios, both in the sun and in metal-poor stars, have been compared with the observed ones. It is concluded that a model with the new yields combined with a Salpeter initial mass function, an upper cutoff mass of 100 solar masses (the mass beyond which stars are not contributing to the galactic enrichment), and an upper limiting mass for intermediate-mass stars of the order of 5 solar masses, is in best agreement with the observations. 34 references

  19. Rate theory

    International Nuclear Information System (INIS)

    Maillard, S.; Skorek, R.; Maugis, P.; Dumont, M.

    2015-01-01

    This chapter presents the basic principles of cluster dynamics as a particular case of mesoscopic rate theory models developed to investigate fuel behaviour under irradiation such as in UO 2 . It is shown that as this method simulates the evolution of the concentration of every type of point or aggregated defect in a grain of material. It produces rich information that sheds light on the mechanisms involved in microstructure evolution and gas behaviour that are not accessible through conventional models but yet can provide for improvements in those models. Cluster dynamics parameters are mainly the energetic values governing the basic evolution mechanisms of the material (diffusion, trapping and thermal resolution). In this sense, the model has a general applicability to very different operational situations (irradiation, ion-beam implantation, annealing) provided that they rely on the same basic mechanisms, without requiring additional data fitting, as is required for more empirical conventional models. This technique, when applied to krypton implanted and annealed samples, yields a precise interpretation of the release curves and helps assess migration mechanisms and the krypton diffusion coefficient, for which data is very difficult to obtain due to the low solubility of the gas. (authors)

  20. Numerical modeling of the deflagration-to-detonation transition

    International Nuclear Information System (INIS)

    Forest, C.A.

    1978-01-01

    The effect of a confined porous bed of burning explosive in contact with a solid explosive is studied by computer simulation. The burning is modeled using a bulk burn model that is a function of the surface area and the pressure. Once pressure excursions occur from the confined burning the transition to detonation is modeled using a pressure-dependent heterogeneous explosive shock decomposition model called Forest Fire. The occurrence of detonation in the solid explosive is shown to be dependent upon the surface-to-volume ratio, the confinement of the porous bed, and the geometry of the system

  1. Effect of turbulence on deflagration to detonation transition

    International Nuclear Information System (INIS)

    Radford, D.D.; Chan, C.K.; Azad, R.S.

    1995-01-01

    The interaction of a turbulent jet and an expanding flame kernel was examined using spark-schlieren photography and piezoelectric pressure transducers. Experiments were performed in a 9 by 9 cm, 4-m-long shock channel. Results show that an expanding flame kernel can be locally, or partially, quenched by flame stretching. The mixing of the hot combustion products, containing reactive species, with the unburnt gas in the turbulent flame-jet, created pockets of sensitized mixture. The subsequent re-ignition of the sensitized mixture could result in a local explosion. In a number of experiments the blast waves produced in the local explosion developed into detonation waves. A local explosion occurred only if there was partial quenching of the flame kernel. Partial quenching occurs when the Karlovitz-Kovaszney factor approaches unity and, therefore, it is possible to establish a set of conditions in terms of turbulent parameters for the transition to detonation. (author). 16 refs., 13 figs

  2. Magnetohydrodynamical Effects on Nuclear Deflagration Fronts in Type Ia Supernovae

    Science.gov (United States)

    Hristov, Boyan; Collins, David C.; Hoeflich, Peter; Weatherford, Charles A.; Diamond, Tiara R.

    2018-05-01

    This article presents a study of the effects of magnetic fields on non-distributed nuclear burning fronts as a possible solution to a fundamental problem for the thermonuclear explosion of a Chandrasekhar mass ({M}Ch}) white dwarf (WD), the currently favored scenario for the majority of Type Ia SNe. All existing 3D hydrodynamical simulations predict strong global mixing of the burning products due to Rayleigh–Taylor (RT) instabilities, which contradicts observations. As a first step toward studying the flame physics, we present a set of computational magnet-hydrodynamic models in rectangular flux tubes, resembling a small inner region of a WD. We consider initial magnetic fields up to {10}12 {{G}} of various orientations. We find an increasing suppression of RT instabilities starting at about {10}9 {{G}}. The front speed tends to decrease with increasing magnitude up to about {10}11 {{G}}. For even higher fields new small-scale, finger-like structures develop, which increase the burning speed by a factor of 3 to 4 above the field-free RT-dominated regime. We suggest that the new instability may provide sufficiently accelerated energy production during the distributed burning regime to go over the Chapman–Jougey limit and trigger a detonation. Finally, we discuss the possible origins of high magnetic fields during the final stage of the progenitor evolution or the explosion.

  3. Effect of turbulence on deflagration to detonation transition

    Energy Technology Data Exchange (ETDEWEB)

    Radford, D D; Chan, C K [Atomic Energy of Canada Ltd., Pinawa, MB (Canada). Whiteshell Labs.; Azad, R S [Manitoba Univ., Winnipeg, MB (Canada). Dept. of Mechanical Engineering

    1996-12-31

    The interaction of a turbulent jet and an expanding flame kernel was examined using spark-schlieren photography and piezoelectric pressure transducers. Experiments were performed in a 9 by 9 cm, 4-m-long shock channel. Results show that an expanding flame kernel can be locally, or partially, quenched by flame stretching. The mixing of the hot combustion products, containing reactive species, with the unburnt gas in the turbulent flame-jet, created pockets of sensitized mixture. The subsequent re-ignition of the sensitized mixture could result in a local explosion. In a number of experiments the blast waves produced in the local explosion developed into detonation waves. A local explosion occurred only if there was partial quenching of the flame kernel. Partial quenching occurs when the Karlovitz-Kovaszney factor approaches unity and, therefore, it is possible to establish a set of conditions in terms of turbulent parameters for the transition to detonation. (author). 16 refs., 13 figs.

  4. Deflagration-to-Detonation Transition in Heteorogeneous Solids: A Bibliography.

    Science.gov (United States)

    1980-11-01

    and Rockets, Vol. 9. No. 6, 1972, pp. 415-419. 1.4 Francois, D., and L. Joly; " La Rupture des Metaux; Ecole d’ete de la Colle sur Loup ," Masson et Cie...Computer Program for Multifield Fluid Flows," Los Alamos Scientific Laboratory, LA -5680, 1974. 5.3, 9 Nnderssen, K. E. B.; "Pressure Drop in Ideal...5.6, 6, 9 Forest, C. A.: "Burning and Detonation," Los Alamos Scientific Laboratory, LA -7245, July 1978. 2, 3, 4 Fox, J.; "Flow Regimes in

  5. Deflagration in stainless steel storage containers containing plutonium dioxide

    International Nuclear Information System (INIS)

    Kleinschmidt, P.D.

    1996-02-01

    Detonation of hydrogen and oxygen in stainless steel storage containers produces maximum pressures of 68.5 psia and 426.7 psia. The cylinders contain 3,000 g of PuO 2 with 0.05 wt% and 0.5 wt% water respectively. The hydrogen and oxygen are produced by the alpha decomposition of the water. Work was performed for the Savannah River Site

  6. Explosion hazards of aluminum finishing operations

    NARCIS (Netherlands)

    Taveau, J.R.; Hochgreb, Simone; Lemkowitz, S.M.; Roekaerts, D.J.E.M.

    2018-01-01

    Metal dust deflagrations have become increasingly common in recent years. They are also more devastating than deflagrations involving organic materials, owing to metals' higher heat of combustion, rate of pressure rise, explosion pressure and flame temperature. Aluminum finishing operations offer

  7. Explosion hazards of aluminum finishing operations

    NARCIS (Netherlands)

    Taveau, J.; Hochgreb, S.; Lemkowitz, S.M.; Roekaerts, D.J.E.M.

    2018-01-01

    Metal dust deflagrations have become increasingly common in recent years. They are also more devastating than deflagrations involving organic materials, owing to metals' higher heat of combustion, rate of pressure rise, explosion pressure and flame temperature. Aluminum finishing operations offer a

  8. Heart rate index

    DEFF Research Database (Denmark)

    Haedersdal, C; Pedersen, F H; Svendsen, J H

    1992-01-01

    after the myocardial infarction. A significant correlation (Spearman's correlation coefficient rs, p less than 0.05) was found between LVEF at rest and the following variables assessed at exercise test: 1) the heart rate at rest, 2) rise in heart rate, 3) ratio between maximal heart rate and heart rate...... at rest, 4) rise in systolic blood pressure, 5) rate pressure product at rest, 6) rise in rate pressure product, 7) ratio (rHR) between maximal rate pressure product and rate pressure product at rest, 8) total exercise time. The heart rate was corrected for effects caused by age (heart index (HR...

  9. Real Property Tax Rates

    Data.gov (United States)

    Montgomery County of Maryland — The Levy Year 2012 real property tax rate dataset reflects all the rates per $100 set each year by the County Council. These rates are applied to the assessed value...

  10. Variable-Rate Premiums

    Data.gov (United States)

    Pension Benefit Guaranty Corporation — These interest rates are used to value vested benefits for variable rate premium purposes as described in PBGC's regulation on Premium Rates (29 CFR Part 4006) and...

  11. Rating Movies and Rating the Raters Who Rate Them.

    Science.gov (United States)

    Zhou, Hua; Lange, Kenneth

    2009-11-01

    The movie distribution company Netflix has generated considerable buzz in the statistics community by offering a million dollar prize for improvements to its movie rating system. Among the statisticians and computer scientists who have disclosed their techniques, the emphasis has been on machine learning approaches. This article has the modest goal of discussing a simple model for movie rating and other forms of democratic rating. Because the model involves a large number of parameters, it is nontrivial to carry out maximum likelihood estimation. Here we derive a straightforward EM algorithm from the perspective of the more general MM algorithm. The algorithm is capable of finding the global maximum on a likelihood landscape littered with inferior modes. We apply two variants of the model to a dataset from the MovieLens archive and compare their results. Our model identifies quirky raters, redefines the raw rankings, and permits imputation of missing ratings. The model is intended to stimulate discussion and development of better theory rather than to win the prize. It has the added benefit of introducing readers to some of the issues connected with analyzing high-dimensional data.

  12. Interest rate derivatives

    DEFF Research Database (Denmark)

    Svenstrup, Mikkel

    This Ph.D. thesis consists of four self-contained essays on valuation of interest rate derivatives. In particular derivatives related to management of interest rate risk care are considered.......This Ph.D. thesis consists of four self-contained essays on valuation of interest rate derivatives. In particular derivatives related to management of interest rate risk care are considered....

  13. Airline Quality Rating 1996

    OpenAIRE

    Bowen, Brent D.; Headley, Dean E.

    1996-01-01

    The Airline Quality Rating (AQR) was developed and first announced in early 1991 as an objective method of comparing airline performance on combined multiple factors important to consumers. Development history and calculation details for the AQR rating system are detailed in The Airline Quality Rating issued in April, 1991, by the National Institute for Aviation Research at Wichita State University. This current report, Airline Quality Rating 1996, contains monthly Airline Quality Rating scor...

  14. The rating reliability calculator

    Directory of Open Access Journals (Sweden)

    Solomon David J

    2004-04-01

    Full Text Available Abstract Background Rating scales form an important means of gathering evaluation data. Since important decisions are often based on these evaluations, determining the reliability of rating data can be critical. Most commonly used methods of estimating reliability require a complete set of ratings i.e. every subject being rated must be rated by each judge. Over fifty years ago Ebel described an algorithm for estimating the reliability of ratings based on incomplete data. While his article has been widely cited over the years, software based on the algorithm is not readily available. This paper describes an easy-to-use Web-based utility for estimating the reliability of ratings based on incomplete data using Ebel's algorithm. Methods The program is available public use on our server and the source code is freely available under GNU General Public License. The utility is written in PHP, a common open source imbedded scripting language. The rating data can be entered in a convenient format on the user's personal computer that the program will upload to the server for calculating the reliability and other statistics describing the ratings. Results When the program is run it displays the reliability, number of subject rated, harmonic mean number of judges rating each subject, the mean and standard deviation of the averaged ratings per subject. The program also displays the mean, standard deviation and number of ratings for each subject rated. Additionally the program will estimate the reliability of an average of a number of ratings for each subject via the Spearman-Brown prophecy formula. Conclusion This simple web-based program provides a convenient means of estimating the reliability of rating data without the need to conduct special studies in order to provide complete rating data. I would welcome other researchers revising and enhancing the program.

  15. Labor Force Participation Rate

    Data.gov (United States)

    City and County of Durham, North Carolina — This thematic map presents the labor force participation rate of working-age people in the United States in 2010. The 2010 Labor Force Participation Rate shows the...

  16. Rate Review Data

    Data.gov (United States)

    U.S. Department of Health & Human Services — As of September 1, 2011, the Affordable Care Act and rate review regulation require review of rate increases of 10 percent or more. A non-grandfathered health plan...

  17. Interest Rates and Inflation

    OpenAIRE

    Coopersmith, Michael; Gambardella, Pascal J.

    2016-01-01

    This article is an extension of the work of one of us (Coopersmith, 2011) in deriving the relationship between certain interest rates and the inflation rate of a two component economic system. We use the well-known Fisher relation between the difference of the nominal interest rate and its inflation adjusted value to eliminate the inflation rate and obtain a delay differential equation. We provide computer simulated solutions for this equation over regimes of interest. This paper could be of ...

  18. Interest Rate Swaps

    OpenAIRE

    Marina Pepic

    2014-01-01

    Interest rates changes have a huge impact on the business performance. Therefore, it is of great importance for the market participants to identify and adequately manage this risk. Financial derivatives are a relatively simple way of protection from adverse changes in interest rates. Interest rate swaps are particularly popular because they reduce interest rate risk to a minimum with a relatively low initial cost and without great risk, but also because of the fact that there are many modific...

  19. Understanding Interest Rate Volatility

    OpenAIRE

    Volker, Desi

    2016-01-01

    This thesis is the result of my Ph.D. studies at the Department of Finance of the Copenhagen Business School. It consists of three essays covering topics related to the term structure of interest rates, monetary policy and interest rate volatility. The rst essay, \\Monetary Policy Uncertainty and Interest Rates", examines the role of monetary policy uncertainty on the term structure of interest rates. The second essay, \\A Regime-Switching A ne Term Structure Model with Stochast...

  20. Airline Quality Rating 2003

    OpenAIRE

    Bowen, Brent D.; Headley, Dean E.

    2003-01-01

    The Airline Quality Rating (AQR) was developed and first announced in early 1991 as an objective method of comparing airline quality on combined multiple performance criteria. This current report, the Airline Quality Rating 2003, reflects monthly Airline Quality Rating scores for 2002. AQR scores for the calendar year 2002 are based on 15 elements that focus on airline performance areas important to air travel consumers. The Airline Quality Rating 2003 is a summary of month-by-month qualit...

  1. Airline Quality Rating 2001

    OpenAIRE

    Bowen, Brent D.; Headley, Dean E.

    2001-01-01

    The Airline Quality Rating (AQR) was developed and first announced in early 1991 as an objective method of comparing airline quality on combined multiple performance criteria. This current report, Airline Quality Rating 2001, reflects monthly Airline Quality Rating scores for 2000. AQR scores for the calendar year 2000 are based on 15 elements that focus on airline performance areas important to air travel consumers. The Airline Quality Rating 2001 is a summary of month-by-month quality ra...

  2. Thermonuclear reaction rates. III

    International Nuclear Information System (INIS)

    Harris, M.J.; Fowler, W.A.; Caughlan, G.R.; Zimmerman, B.A.

    1983-01-01

    Stellar thermonuclear reaction rates are revised and updated, adding a number of new important reaction rates. Several reactions with large negative Q-values are included, and examples of them are discussed. The importance of the decay rates for Mg-26(p,n) exp 26 Al and Al-26(n,p) exp 26 Mg for stellar studies is emphasized. 19 references

  3. Resonant thermonuclear reaction rate

    International Nuclear Information System (INIS)

    Haubold, H.J.; Mathai, A.M.

    1986-01-01

    Basic physical principles for the resonant and nonresonant thermonuclear reaction rates are applied to find their standard representations for nuclear astrophysics. Closed-form representations for the resonant reaction rate are derived in terms of Meijer's G-function. Analytic representations of the resonant and nonresonant nuclear reaction rates are compared and the appearance of Meijer's G-function is discussed in physical terms

  4. Credit Rating and Competition

    OpenAIRE

    Nelson Camanho; Pragyan Deb; Zijun Liu

    2010-01-01

    In principle, credit rating agencies are supposed to be impartial observers that bridge the gap between private information of issuers and the information available to the wider pool of investors. However, since the 1970s, rating agencies have relied on an issuer-pay model, creating a conflict of interest the largest source of income for the rating agencies are the fees paid by the issuers the rating agencies are supposed to impartially rate. In this paper, we explore the trade-off between re...

  5. Understanding Interest Rate Volatility

    DEFF Research Database (Denmark)

    Volker, Desi

    This thesis is the result of my Ph.D. studies at the Department of Finance of the Copenhagen Business School. It consists of three essays covering topics related to the term structure of interest rates, monetary policy and interest rate volatility. The rst essay, \\Monetary Policy Uncertainty...... and Interest Rates", examines the role of monetary policy uncertainty on the term structure of interest rates. The second essay, \\A Regime-Switching A ne Term Structure Model with Stochastic Volatility" (co-authored with Sebastian Fux), investigates the ability of the class of regime switching models...... with and without stochastic volatility to capture the main stylized features of U.S. interest rates. The third essay, \\Variance Risk Premia in the Interest Rate Swap Market", investigates the time-series and cross-sectional properties of the compensation demanded for holding interest rate variance risk. The essays...

  6. Exchange rate policy

    Directory of Open Access Journals (Sweden)

    Plačkov Slađana

    2013-01-01

    Full Text Available Small oscillations of exchange rate certainly affect the loss of confidence in the currency (Serbian dinar, CSD and because of the shallow market even the smallest change in the supply and demand leads to a shift in exchange rate and brings uncertainty. Some economists suggest that the course should be linked to inflation and thus ensure predictable and stable exchange rates. Real exchange rate or slightly depressed exchange rate will encourage the competitiveness of exporters and perhaps ensure the development of new production lines which, in terms of overvalued exchange rate, had no economic justification. Fixed exchange rate will bring lower interest rates, lower risk and lower business uncertainty (uncertainty avoidance, but Serbia will also reduce foreign exchange reserves by following this trend. On the other hand, a completely free exchange rate, would lead to a (real fall of Serbian currency, which in a certain period would lead to a significant increase in exports, but the consequences for businessmen and citizens with loans pegged to the euro exchange rate, would be disastrous. We will pay special attention to the depreciation of the exchange rate, as it is generally favorable to the export competitiveness of Serbia and, on the other hand, it leads to an increase in debt servicing costs of the government as well as of the private sector. Oscillations of the dinar exchange rate, appreciation and depreciation, sometimes have disastrous consequences on the economy, investors, imports and exports. In subsequent work, we will observe the movement of the dinar exchange rate in Serbia, in the time interval 2009-2012, in order to strike a balance and maintain economic equilibrium. A movement of foreign currencies against the local currency is controlled in the foreign exchange market, so in case economic interests require, The National Bank of Serbia (NBS, on the basis of arbitrary criteria, can intervene in the market.

  7. Electric rate operations

    International Nuclear Information System (INIS)

    Maillard, D.

    1993-01-01

    The share of nuclear power in EDF production implies multiple rate structures. How are these rates determined. What are the new applications of electricity, and in particular those that make use of the especially low summer prices for electricity. These are topics of interest to the man in the street (witness EDF's recent 'red-white-blue' rates). This prompted the 'Nuclear Power in the Financial, Energy and Economic situation' department of France's nuclear power company to organize a conference bringing together an expert on rates - M.P. Bernard, head of the rate fixing service at the EDF's headquarters - and representatives from suppliers of equipment taking advantage of the various EDF rate options

  8. Observed Barium Emission Rates

    Science.gov (United States)

    Stenbaek-Nielsen, H. C.; Wescott, E. M.; Hallinan, T. J.

    1993-01-01

    The barium releases from the CRRES satellite have provided an opportunity for verifying theoretically calculated barium ion and neutral emission rates. Spectra of the five Caribbean releases in the summer of 1991 were taken with a spectrograph on board a U.S. Air Force jet aircraft. Because the line of sight release densities are not known, only relative rates could be obtained. The observed relative rates agree well with the theoretically calculated rates and, together with other observations, confirm the earlier detailed theoretical emission rates. The calculated emission rates can thus with good accuracy be used with photometric observations. It has been postulated that charge exchange between neutral barium and oxygen ions represents a significant source for ionization. If so. it should be associated with emissions at 4957.15 A and 5013.00 A, but these emissions were not detected.

  9. Understanding Rig Rates

    OpenAIRE

    Petter Osmundsen; Knut Einar Rosendahl; Terje Skjerpen

    2013-01-01

    We examine the largest cost component in offshore development projects, drilling rates, which have been high over the last years. To our knowledge, rig rates have not been analysed empirically before in the economic literature. By econometric analysis we examine the effects on Gulf of Mexico rig rates of gas and oil prices, rig capacity utilization, contract length and lead time, and rig specific characteristics. Having access to a unique data set containing contract information, we are able ...

  10. Airline Quality Rating 2013

    OpenAIRE

    Bowen, Brent D.; Headley, Dean E.

    2013-01-01

    The Airline Quality Rating (AQR) was developed and first announced in early 1991 as an objective method for assessing airline quality on combined multiple performance criteria. This current report, the Airline Quality Rating 2013, reflects monthly Airline Quality Rating scores for calendar year 2012. AQR scores for 2013 are based on 15 elements in four major areas that focus on airline performance aspects important to air travel consumers over the calendar year of 2012. The Airline Quality...

  11. Long Maturity Forward Rates

    DEFF Research Database (Denmark)

    Christiansen, Charlotte

    2001-01-01

    The paper aims to improve the knowledge of the empirical properties of the long maturity region of the forward rate curve. Firstly, the theoretical negative correlation between the slope at the long end of the forward rate curve and the term structure variance is recovered empirically and found...... to be statistically significant. Secondly, the expectations hypothesis is analyzed for the long maturity region of the forward rate curve using "forward rate" regressions. The expectations hypothesis is numerically close to being accepted but is statistically rejected. The findings provide mixed support...... for the affine term structure model....

  12. Interest Rate Swaps

    Directory of Open Access Journals (Sweden)

    Marina Pepić

    2014-12-01

    Full Text Available Interest rates changes have a huge impact on the business performance. Therefore, it is of great importance for the market participants to identify and adequately manage this risk. Financial derivatives are a relatively simple way of protection from adverse changes in interest rates. Interest rate swaps are particularly popular because they reduce interest rate risk to a minimum with a relatively low initial cost and without great risk, but also because of the fact that there are manymodifications of the standard swap created to better satisfy the different needs of market players.

  13. Does basal metabolic rate drive eating rate?

    Science.gov (United States)

    Henry, Christiani Jeyakumar; Ponnalagu, Shalini; Bi, Xinyan; Forde, Ciaran

    2018-05-15

    There have been recent advances in our understanding of the drivers of energy intake (EI). However, the biological drivers of differences in eating rate (ER) remain less clear. Studies have reported that the fat-free mass (FFM) and basal metabolic rate (BMR) are both major components that contribute to daily energy expenditure (EE) and drive EI. More recently, a number of observations report that higher ER can lead to greater EI. The current study proposed that adults with a higher BMR and higher energy requirements would also exhibit higher ERs. Data on BMR, FFM, and ER were collected from 272 Chinese adults (91 males and 181 females) in a cross-sectional study. Analysis showed significant positive associations between BMR and ER (r s  = 0.405, p BMR explained about 15% of the variation in ER which was taken to be metabolically significant. This association provides metabolic explanation that the differences in an individual's BMR (hence energy requirements) may be correlated with ERs. This merits further research. Copyright © 2018 Elsevier Inc. All rights reserved.

  14. Rate of force development

    DEFF Research Database (Denmark)

    Maffiuletti, Nicola A; Aagaard, Per; Blazevich, Anthony J

    2016-01-01

    The evaluation of rate of force development during rapid contractions has recently become quite popular for characterising explosive strength of athletes, elderly individuals and patients. The main aims of this narrative review are to describe the neuromuscular determinants of rate of force devel...

  15. Extended rate equations

    International Nuclear Information System (INIS)

    Shore, B.W.

    1981-01-01

    The equations of motion are discussed which describe time dependent population flows in an N-level system, reviewing the relationship between incoherent (rate) equations, coherent (Schrodinger) equations, and more general partially coherent (Bloch) equations. Approximations are discussed which replace the elaborate Bloch equations by simpler rate equations whose coefficients incorporate long-time consequences of coherence

  16. Applications of Reaction Rate

    Science.gov (United States)

    Cunningham, Kevin

    2007-01-01

    This article presents an assignment in which students are to research and report on a chemical reaction whose increased or decreased rate is of practical importance. Specifically, students are asked to represent the reaction they have chosen with an acceptable chemical equation, identify a factor that influences its rate and explain how and why it…

  17. Rating mutual funds

    DEFF Research Database (Denmark)

    Bechmann, Ken L.; Rangvid, Jesper

    2007-01-01

    We develop a new rating of mutual funds: the atpRating. The atpRating assigns crowns to each individual mutual fund based upon the costs an investor pays when investing in the fund in relation to what it would cost to invest in the fund's peers. Within each investment category, the rating assigns...... the return of a fund in a certain year generally contains only little information about the future return that the fund will generate. Finally, we have information on the investments in different mutual funds made by a small subgroup of investors known to have been exposed to both the atp...... five crowns to funds with the lowest costs and one crown to funds with the highest costs. We investigate the ability of the atpRating to predict the future performance of a fund. We find that an investor who has invested in the funds with the lowest costs within an investment category would have...

  18. Rating Mutual Funds

    DEFF Research Database (Denmark)

    Bechmann, Ken L.; Rangvid, Jesper

    We develop a new rating of mutual funds: the atpRating. The atpRating assigns crowns to each individual mutual fund based upon the costs an investor pays when investing in the fund in relation to what it would cost to invest in the fund’s peers. Within each investment category, the rating assigns......, whereas the return of a fund in a certain year generally contains only little information about the future return that the fund will generate. Finally, we have information on the investments in different mutual funds made by a small subgroup of investors known to have been exposed to both the atp...... five crowns to funds with the lowest costs and one crown to funds with the highest costs. We investigate the ability of the atpRating to predict the future performance of a fund. We find that an investor who has invested in the funds with the lowest costs within an investment category would have...

  19. Interest rates mapping

    Science.gov (United States)

    Kanevski, M.; Maignan, M.; Pozdnoukhov, A.; Timonin, V.

    2008-06-01

    The present study deals with the analysis and mapping of Swiss franc interest rates. Interest rates depend on time and maturity, defining term structure of the interest rate curves (IRC). In the present study IRC are considered in a two-dimensional feature space-time and maturity. Exploratory data analysis includes a variety of tools widely used in econophysics and geostatistics. Geostatistical models and machine learning algorithms (multilayer perceptron and Support Vector Machines) were applied to produce interest rate maps. IR maps can be used for the visualisation and pattern perception purposes, to develop and to explore economical hypotheses, to produce dynamic asset-liability simulations and for financial risk assessments. The feasibility of an application of interest rates mapping approach for the IRC forecasting is considered as well.

  20. River rating complexity

    Science.gov (United States)

    Holmes, Robert R.

    2016-01-01

    Accuracy of streamflow data depends on the veracity of the rating model used to derive a continuous time series of discharge from the surrogate variables that can readily be collected autonomously at a streamgage. Ratings are typically represented as a simple monotonic increasing function (simple rating), meaning the discharge is a function of stage alone, however this is never truly the case unless the flow is completely uniform at all stages and in transitions from one stage to the next. For example, at some streamflow-monitoring sites the discharge on the rising limb of the hydrograph is discernably larger than the discharge at the same stage on the falling limb of the hydrograph. This is the so-called “loop rating curve” (loop rating). In many cases, these loops are quite small and variation between rising- and falling-limb discharge measurements made at the same stage are well within the accuracy of the measurements. However, certain hydraulic conditions can produce a loop that is large enough to preclude use of a monotonic rating. A detailed data campaign for the Mississippi River at St. Louis, Missouri during a multi-peaked flood over a 56-day period in 2015 demonstrates the rating complexity at this location. The shifting-control method used to deal with complexity at this site matched all measurements within 8%.

  1. Throughput rate study

    International Nuclear Information System (INIS)

    Ford, L.; Bailey, W.; Gottlieb, P.; Emami, F.; Fleming, M.; Robertson, D.

    1993-01-01

    The Civilian Radioactive Waste Management System (CRWMS) Management and Operating (M ampersand O) Contractor, has completed a study to analyze system wide impacts of operating the CRWMS at varying throughput rates, including the 3000 MTU/year rate which has been assumed in the past. Impacts of throughput rate on all phases of the CRWMS operations (acceptance, transportation, storage and disposal) were evaluated. The results of the study indicate that a range from 3000 to 5000 MTU/year is preferred, based on system cost per MTU of SNF emplaced and logistics constraints

  2. 76 FR 77581 - Interest Rates

    Science.gov (United States)

    2011-12-13

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  3. 77 FR 76586 - Interest Rates

    Science.gov (United States)

    2012-12-28

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  4. 76 FR 18821 - Interest Rates

    Science.gov (United States)

    2011-04-05

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  5. 78 FR 18664 - Interest Rates

    Science.gov (United States)

    2013-03-27

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  6. 75 FR 81326 - Interest Rates

    Science.gov (United States)

    2010-12-27

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  7. 77 FR 39560 - Interest Rates

    Science.gov (United States)

    2012-07-03

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  8. 75 FR 37872 - Interest Rates

    Science.gov (United States)

    2010-06-30

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  9. 77 FR 20476 - Interest Rates

    Science.gov (United States)

    2012-04-04

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  10. 75 FR 60152 - Interest Rates

    Science.gov (United States)

    2010-09-29

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  11. 77 FR 59447 - Interest Rates

    Science.gov (United States)

    2012-09-27

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  12. 78 FR 62932 - Interest Rates

    Science.gov (United States)

    2013-10-22

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  13. 78 FR 39434 - Interest Rates

    Science.gov (United States)

    2013-07-01

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This rate will...

  14. Allegheny County Obesity Rates

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Obesity rates for each Census Tract in Allegheny County were produced for the study “Developing small-area predictions for smoking and obesity prevalence in the...

  15. Lapse rate modeling

    DEFF Research Database (Denmark)

    De Giovanni, Domenico

    2010-01-01

    prepayment models for mortgage backed securities, this paper builds a Rational Expectation (RE) model describing the policyholders' behavior in lapsing the contract. A market model with stochastic interest rates is considered, and the pricing is carried out through numerical approximation...

  16. Lapse Rate Modeling

    DEFF Research Database (Denmark)

    De Giovanni, Domenico

    prepayment models for mortgage backed securities, this paper builds a Rational Expectation (RE) model describing the policyholders' behavior in lapsing the contract. A market model with stochastic interest rates is considered, and the pricing is carried out through numerical approximation...

  17. Resettlement and Birth Rates

    African Journals Online (AJOL)

    GB

    The Relationship between Resettlement and Birth Rates: The Case of ... statistical software. SAS is used. RESULTS: In a univariate analysis of Gambella's ..... World Bank Conference on Land And. Poverty. Washington DC, World Bank, April.

  18. Bridge element deterioration rates.

    Science.gov (United States)

    2008-10-01

    This report describes the development of bridge element deterioration rates using the NYSDOT : bridge inspection database using Markov chains and Weibull-based approaches. It is observed : that Weibull-based approach is more reliable for developing b...

  19. Allegheny County Smoking Rates

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Smoking rates for each Census Tract in Allegheny County were produced for the study “Developing small-area predictions for smoking and obesity prevalence in the...

  20. Interest Rates and Inflation

    OpenAIRE

    Coopersmith, Michael

    2011-01-01

    A relation between interest rates and inflation is presented using a two component economic model and a simple general principle. Preliminary results indicate a remarkable similarity to classical economic theories, in particular that of Wicksell.

  1. Fertility Clinic Success Rates

    Science.gov (United States)

    ... Defects ART and Autism 2013 Assisted Reproductive Technology Fertility Clinic Success Rates Report Recommend on Facebook Tweet ... Additional Information About ART in the United States. Fertility Clinic Tables Introduction to Fertility Clinic Tables [PDF - ...

  2. Debenture Interest Rates

    Data.gov (United States)

    Department of Housing and Urban Development — Interest rates to be paid on debentures issued with respect to a loan or mortgage insured by the Federal Housing Commissioner under the provisions of the National...

  3. Rate of Speed

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — Rate of spread was modeled using FlamMap, an interagency fire behavior mapping and analysis program that computes potential fire behavior characteristics. The tool...

  4. Rating Your Cash Manager?

    Science.gov (United States)

    Nielsen, George A.; Johannisson, Eric E.

    1989-01-01

    The primary objective of a public cash management policy should include safety, liquidity, yield, and legality. Contains a cash management policy/procedure checklist, a test for cash managers, and a formula for calculating the rate of return. (MLF)

  5. Ventilation rates and health

    DEFF Research Database (Denmark)

    Sundell, Jan; Levin, H; Nazaroff, W W

    2011-01-01

    and health effects to inform the relationship. Consistency was found across multiple investigations and different epidemiologic designs for different populations. Multiple health endpoints show similar relationships with ventilation rate. There is biological plausibility for an association of health outcomes...... studies of the relationship between ventilation rates and health, especially in diverse climates, in locations with polluted outdoor air and in buildings other than offices. PRACTICAL IMPLICATIONS: Ventilation with outdoor air plays an important role influencing human exposures to indoor pollutants...

  6. High population increase rates.

    Science.gov (United States)

    1991-09-01

    In addition to its economic and ethnic difficulties, the USSR faces several pressing demographic problems, including high population increase rates in several of its constituent republics. It has now become clear that although the country's rigid centralized planning succeeded in covering the basic needs of people, it did not lead to welfare growth. Since the 1970s, the Soviet economy has remained sluggish, which as led to increase in the death and birth rates. Furthermore, the ideology that held that demography could be entirely controlled by the country's political and economic system is contradicted by current Soviet reality, which shows that religion and ethnicity also play a significant role in demographic dynamics. Currently, Soviet republics fall under 2 categories--areas with high or low natural population increase rates. Republics with low rates consist of Christian populations (Armenia, Moldavia, Georgia, Byelorussia, Russia, Lithuania, Estonia, Latvia, Ukraine), while republics with high rates are Muslim (Tadzhikistan, Uzbekistan, Turkmenistan, Kirgizia, Azerbaijan Kazakhstan). The later group has natural increase rates as high as 3.3%. Although the USSR as a whole is not considered a developing country, the later group of republics fit the description of the UNFPA's priority list. Another serious demographic issue facing the USSR is its extremely high rate of abortion. This is especially true in the republics of low birth rates, where up to 60% of all pregnancies are terminated by induced abortions. Up to 1/5 of the USSR's annual health care budget is spent on clinical abortions -- money which could be better spent on the production of contraceptives. Along with the recent political and economic changes, the USSR is now eager to deal with its demographic problems.

  7. Floating Exchange Rate Regime

    OpenAIRE

    Quader, Syed Manzur

    2004-01-01

    In recent years, many developing countries having a history of high inflation, unfavorable balance of payment situation and a high level of foreign currencies denominated debt, have switched or are in the process of switching to a more flexible exchange rate regime. Therefore, the stability of the exchange rate and the dynamics of its volatility are more crucial than before to prevent financial crises and macroeconomic disturbances. This paper is designed to find out the reasons behind Bangla...

  8. Real exchange rate misalignments

    OpenAIRE

    Terra, Maria Cristina T.; Valladares, Frederico Estrella Carneiro

    2003-01-01

    This paper characterizes episodes of real appreciations and depreciations for a sample of 85 countries, approximately from 1960 to 1998. First, the equilibrium real exchange rate series are constructed for each country using Goldfajn and Valdes (1999) methodology (cointegration with fundamentals). Then, departures from equilibrium real exchange rate (misalignments) are obtained, and a Markov Switching Model is used to characterize the misalignments series as stochastic autor...

  9. Hydration rate of obsidian.

    Science.gov (United States)

    Friedman, I; Long, W

    1976-01-30

    The hydration rates of 12 obsidian samples of different chemical compositions were measured at temperatures from 95 degrees to 245 degrees C. An expression relating hydration rate to temperature was derived for each sample. The SiO(2) content and refractive index are related to the hydration rate, as are the CaO, MgO, and original water contents. With this information it is possible to calculate the hydration rate of a sample from its silica content, refractive index, or chemical index and a knowledge of the effective temperature at which the hydration occurred. The effective hydration temperature can be either measured or approximated from weather records. Rates have been calculated by both methods, and the results show that weather records can give a good approximation to the true EHT, particularly in tropical and subtropical climates. If one determines the EHT by any of the methods suggested, and also measures or knows the rate of hydration of the particular obsidian used, it should be possible to carry out absolute dating to +/- 10 percent of the true age over periods as short as several years and as long as millions of years.

  10. Ratings are Overrated!

    Directory of Open Access Journals (Sweden)

    Georgios N. Yannakakis

    2015-07-01

    Full Text Available Are ratings of any use in human-computer interaction and user studies at large? If ratings are of limited use, is there a better alternative for quantitative subjective assessment? Beyond the intrinsic shortcomings of human reporting, there are a number of supplementary limitations and fundamental methodological flaws associated with rating-based questionnaires --- i.e. questionnaires that ask participants to rate their level of agreement with a given statement such as a Likert item. While the effect of these pitfalls has been largely downplayed, recent findings from diverse areas of study question the reliability of using ratings. Rank-based questionnaires --- i.e. questionnaires that ask participants to rank two or more options --- appear as the evident alternative that not only eliminates the core limitations of ratings but also simplifies the use of sound methodologies that yield more reliable models of the underlying reported construct: user emotion, preference, or opinion. This paper solicits recent findings from various disciplines interlinked with psychometrics and offers a quick guide for the use, processing and analysis of rank-based questionnaires for the unique advantages they offer. The paper challenges the traditional state-of-practice in human-computer interaction and psychometrics directly contributing towards a paradigm shift in subjective reporting.

  11. 75 FR 17453 - Interest Rates

    Science.gov (United States)

    2010-04-06

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may [[Page 17454

  12. Predicting Agency Rating Migrations with Spread Implied Ratings

    OpenAIRE

    Jianming Kou; Dr Simone Varotto

    2005-01-01

    Investors traditionally rely on credit ratings to price debt instruments. However, rating agencies are known to be prudent in their approach to rating revisions, which results in delayed ratings adjustments to mutating credit conditions. For a large set of eurobonds we derive credit spread implied ratings and compare them with the ratings issued by rating agencies. Our results indicate that spread implied ratings often anticipate future movement of agency ratings and hence could help track cr...

  13. Asteroid rotation rates

    International Nuclear Information System (INIS)

    Binzel, R.P.; Farinella, P.

    1989-01-01

    Within the last decade the data base of asteroid rotation parameters (rotation rates and lightcurve amplitudes) has become sufficiently large to identify some definite rends and properties which can help us to interpret asteroid collisional evolution. Many significant correlations are found between rotation parameters and diameter, with distinct changes occurring near 125 km. The size range, which is also the diameter above which self-gravity may become important, perhaps represents a division between surviving primordial asteroids and collisional fragments. A Maxwellian is able to fit the observed rotation rate distributions of asteroids with D>125 km, implying that their rotation rates may be determined by collisional evolution. Asteroids with D<125 km show an excess of slow rotators and their non-Maxwellian distributions suggests that their rotation rates are more strongly influenced by other processes, such as the distribution resulting from their formation in catastrophic disruption events. Other correlations observed in the data set include different mean rotation rates for C, S and M type asteroids implying that their surface spectra are indicative of bulk properties

  14. Calculating graduation rates.

    Science.gov (United States)

    Starck, Patricia L; Love, Karen; McPherson, Robert

    2008-01-01

    In recent years, the focus has been on increasing the number of registered nurse (RN) graduates. Numerous states have initiated programs to increase the number and quality of students entering nursing programs, and to expand the capacity of their programs to enroll additional qualified students. However, little attention has been focused on an equally, if not more, effective method for increasing the number of RNs produced-increasing the graduation rate of students enrolling. This article describes a project that undertook the task of compiling graduation data for 15 entry-level programs, standardizing terms and calculations for compiling the data, and producing a regional report on graduation rates of RN students overall and by type of program. Methodology is outlined in this article. This effort produced results that were surprising to program deans and directors and is expected to produce greater collaborative efforts to improve these rates both locally and statewide.

  15. Rate based failure detection

    Science.gov (United States)

    Johnson, Brett Emery Trabun; Gamage, Thoshitha Thanushka; Bakken, David Edward

    2018-01-02

    This disclosure describes, in part, a system management component and failure detection component for use in a power grid data network to identify anomalies within the network and systematically adjust the quality of service of data published by publishers and subscribed to by subscribers within the network. In one implementation, subscribers may identify a desired data rate, a minimum acceptable data rate, desired latency, minimum acceptable latency and a priority for each subscription. The failure detection component may identify an anomaly within the network and a source of the anomaly. Based on the identified anomaly, data rates and or data paths may be adjusted in real-time to ensure that the power grid data network does not become overloaded and/or fail.

  16. Homicide Rates in Lithuania.

    Science.gov (United States)

    Chmieliauskas, Sigitas; Laima, Sigitas; Andriuskeviciute, Gerda; Jurolaic, Eleonora; Jasulaitis, Algimantas

    2018-05-01

    Homicide rate in Lithuania between 2004 and 2013 decreased and reached an average of 6.7 per 100,000 people in 2013. The data regarding forensic autopsies of intentional homicide victims were obtained from the State Forensic Medicine Service. Spearman's correlation test was used to assess trends in the homicide rates. A significant correlation was observed between homicide distribution and the following variables: Lithuania's gross domestic product (r = -0.85, p = 0.003), the number of alcohol intoxication cases of victims (r = 0.97, p homicide distribution (p homicides were carried out indoors, 57% in urban area. The presented findings help decide which prevention programs may be the most effective in homicide rate reduction. © 2017 American Academy of Forensic Sciences.

  17. 76 FR 38717 - Interest Rates

    Science.gov (United States)

    2011-07-01

    ... SMALL BUSINESS ADMINISTRATION Interest Rates The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120.214) on a quarterly basis. This rate is a.... This rate may be used as a base rate for guaranteed fluctuating interest rate SBA loans. This [[Page...

  18. Estimating Discount Rates

    Directory of Open Access Journals (Sweden)

    Laurence Booth

    2015-04-01

    Full Text Available Discount rates are essential to applied finance, especially in setting prices for regulated utilities and valuing the liabilities of insurance companies and defined benefit pension plans. This paper reviews the basic building blocks for estimating discount rates. It also examines market risk premiums, as well as what constitutes a benchmark fair or required rate of return, in the aftermath of the financial crisis and the U.S. Federal Reserve’s bond-buying program. Some of the results are disconcerting. In Canada, utilities and pension regulators responded to the crash in different ways. Utilities regulators haven’t passed on the full impact of low interest rates, so that consumers face higher prices than they should whereas pension regulators have done the opposite, and forced some contributors to pay more. In both cases this is opposite to the desired effect of monetary policy which is to stimulate aggregate demand. A comprehensive survey of global finance professionals carried out last year provides some clues as to where adjustments are needed. In the U.S., the average equity market required return was estimated at 8.0 per cent; Canada’s is 7.40 per cent, due to the lower market risk premium and the lower risk-free rate. This paper adds a wealth of historic and survey data to conclude that the ideal base long-term interest rate used in risk premium models should be 4.0 per cent, producing an overall expected market return of 9-10.0 per cent. The same data indicate that allowed returns to utilities are currently too high, while the use of current bond yields in solvency valuations of pension plans and life insurers is unhelpful unless there is a realistic expectation that the plans will soon be terminated.

  19. Rates of star formation

    International Nuclear Information System (INIS)

    Larson, R.B.

    1977-01-01

    It is illustrated that a theoretical understanding of the formation and evolution of galaxies depends on an understanding of star formation, and especially of the factors influencing the rate of star formation. Some of the theoretical problems of star formation in galaxies, some approaches that have been considered in models of galaxy evolution, and some possible observational tests that may help to clarify which processes or models are most relevant are reviewed. The material is presented under the following headings: power-law models for star formation, star formation processes (conditions required, ways of achieving these conditions), observational indications and tests, and measures of star formation rates in galaxies. 49 references

  20. Estimating NHL Scoring Rates

    OpenAIRE

    Buttrey, Samuel E.; Washburn, Alan R.; Price, Wilson L.; Operations Research

    2011-01-01

    The article of record as published may be located at http://dx.doi.org/10.2202/1559-0410.1334 We propose a model to estimate the rates at which NHL teams score and yield goals. In the model, goals occur as if from a Poisson process whose rate depends on the two teams playing, the home-ice advantage, and the manpower (power-play, short-handed) situation. Data on all the games from the 2008-2009 season was downloaded and processed into a form suitable for the analysis. The model...

  1. Weak interaction rates

    International Nuclear Information System (INIS)

    Sugarbaker, E.

    1995-01-01

    I review available techniques for extraction of weak interaction rates in nuclei. The case for using hadron charge exchange reactions to estimate such rates is presented and contrasted with alternate methods. Limitations of the (p,n) reaction as a probe of Gamow-Teller strength are considered. Review of recent comparisons between beta-decay studies and (p,n) is made, leading to cautious optimism regarding the final usefulness of (p,n)- derived GT strengths to the field of astrophysics. copyright 1995 American Institute of Physics

  2. Weather Balloon Ascent Rate

    Science.gov (United States)

    Denny, Mark

    2016-05-01

    The physics of a weather balloon is analyzed. The surprising aspect of the motion of these balloons is that they ascend to great altitudes (typically 35 km) at a more or less constant rate. Such behavior is not surprising near the ground—say for a helium-filled party balloon rising from street level to the top of the Empire State building—but it is unexpected for a balloon that rises to altitudes where the air is rarefied. We show from elementary physical laws why the ascent rate is approximately constant.

  3. Basic Exchange Rate Theories

    NARCIS (Netherlands)

    J.G.M. van Marrewijk (Charles)

    2005-01-01

    textabstractThis four-chapter overview of basic exchange rate theories discusses (i) the elasticity and absorption approach, (ii) the (long-run) implications of the monetary approach, (iii) the short-run effects of monetary and fiscal policy under various economic conditions, and (iv) the transition

  4. Openings for Zero Rating

    NARCIS (Netherlands)

    A. Preta (Augusto); P. Peng (Peng)

    2016-01-01

    textabstractZero rating (toll-free data) is the practice of internet service providers (ISPs) and mobile operators not charging end users for data usage of specific internet content and applications of content providers through their network. On one hand it may benefit consumers from using the

  5. Rating of environmental criteria

    Energy Technology Data Exchange (ETDEWEB)

    Glueck, K; Krasser, G

    1980-01-01

    After a general theoretical discussion on the question of rating within a framework of cost-benefit studies, first trials as to the quantification and standardisation of twelve selected environmental criteria by means of an indicator system are worked out and compiled. The selection includes the criteria exhaust gas, dust, micro climate, water pollution, water regime, land requirement, vibrations, traffic noise, landscape scene, urban scene, effect of separation and safety risks. An insight is given of the rating practice using an evaluation of the available literature, of a household interview and of an interview of experts. The interviewing of 156 experts as to their rating conception of ten criteria in the second round has provided contributions to the general problem of the evaluation estimate based on multi criteria analysis as well as differentiation of the twelve or ten environmental criteria. The following criteria ratings given by the experts and which are averaged and smoothed are: traffic noise 20,0% +- 8,5; air pollution 15,0% +- 7,0; safety risk 13,0% +- 7,0; soil and water pollution 8,5% +- 5,0; landscape scene 8,0% +- 4,5; urban scene 8,0% +- 4,5; water regime 6,5% +- 3,5 and vibrations 4,5% +- 2,5.

  6. Unusual ISS Rate Signature

    Science.gov (United States)

    Laible, Michael R.

    2011-01-01

    On November 23, 2011 International Space Station Guidance, Navigation, and Control reported unusual pitch rate disturbance. These disturbances were an order of magnitude greater than nominal rates. The Loads and Dynamics team was asked to review and analyze current accelerometer data to investigate this disturbance. This paper will cover the investigation process under taken by the Loads and Dynamics group. It will detail the accelerometers used and analysis performed. The analysis included performing Frequency Fourier Transform of the data to identify the mode of interest. This frequency data is then reviewed with modal analysis of the ISS system model. Once this analysis is complete and the disturbance quantified, a forcing function was produced to replicate the disturbance. This allows the Loads and Dynamics team to report the load limit values for the 100's of interfaces on the ISS.

  7. Time, rate, and conditioning.

    Science.gov (United States)

    Gallistel, C R; Gibbon, J

    2000-04-01

    The authors draw together and develop previous timing models for a broad range of conditioning phenomena to reveal their common conceptual foundations: First, conditioning depends on the learning of the temporal intervals between events and the reciprocals of these intervals, the rates of event occurrence. Second, remembered intervals and rates translate into observed behavior through decision processes whose structure is adapted to noise in the decision variables. The noise and the uncertainties consequent on it have both subjective and objective origins. A third feature of these models is their timescale invariance, which the authors argue is a very important property evident in the available experimental data. This conceptual framework is similar to the psychophysical conceptual framework in which contemporary models of sensory processing are rooted. The authors contrast it with the associative conceptual framework.

  8. Radiation dose rate meter

    International Nuclear Information System (INIS)

    Kronenberg, S.; Siebentritt, C.R.

    1981-01-01

    A combined dose rate meter and charger unit therefor which does not require the use of batteries but on the other hand produces a charging potential by means of a piezoelectric cylinder which is struck by a manually triggered hammer mechanism. A tubular type electrometer is mounted in a portable housing which additionally includes a geiger-muller (Gm) counter tube and electronic circuitry coupled to the electrometer for providing multi-mode operation. In one mode of operation, an rc circuit of predetermined time constant is connected to a storage capacitor which serves as a timed power source for the gm tube, providing a measurement in terms of dose rate which is indicated by the electrometer. In another mode, the electrometer indicates individual counts

  9. On multiple discount rates

    OpenAIRE

    Chambers, Christopher P.; Echenique, Federico

    2016-01-01

    We propose a theory of intertemporal choice that is robust to specific assumptions on the discount rate. One class of models requires that one utility stream be chosen over another if and only if its discounted value is higher for all discount factors in a set. Another model focuses on an average discount factor. Yet another model is pessimistic, and evaluates a flow by the lowest available discounted value.

  10. VAP rates unchanged

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2016-12-01

    Full Text Available No abstract available. Article truncated at 150 words. In a research letter to JAMA Metersky and colleagues (1 report that ventilator-associated pneumonia (VAP rates have remained near 10% since 2005. The authors reviewed Medicare Patient Safety Monitoring System (MPSMS data on a representative sample of more than 86,000 critically ill patients treated at 1330 US hospitals between 2005 and 2013. To meet a diagnosis of VAP patients were required to have at least 2 days' ventilation in intensive care units; a chest radiograph with a new finding suggesting pneumonia; a physician diagnosis of pneumonia; and an order for antibiotics. VAP incidence was 10.8% (95% confidence interval, 7.4% - 14.4% during 2005 to 2006 and 9.7% (95% confidence interval, 5.1% - 14.9% during 2012 to 2013. In contrast, data from the CDC's National Healthcare Safety Network (NHSN have shown declines in VAP rates of 71% and 62% in medical and surgical intensive care units, respectively, between 2006 and 2012 …

  11. Neonatal heart rate prediction.

    Science.gov (United States)

    Abdel-Rahman, Yumna; Jeremic, Aleksander; Tan, Kenneth

    2009-01-01

    Technological advances have caused a decrease in the number of infant deaths. Pre-term infants now have a substantially increased chance of survival. One of the mechanisms that is vital to saving the lives of these infants is continuous monitoring and early diagnosis. With continuous monitoring huge amounts of data are collected with so much information embedded in them. By using statistical analysis this information can be extracted and used to aid diagnosis and to understand development. In this study we have a large dataset containing over 180 pre-term infants whose heart rates were recorded over the length of their stay in the Neonatal Intensive Care Unit (NICU). We test two types of models, empirical bayesian and autoregressive moving average. We then attempt to predict future values. The autoregressive moving average model showed better results but required more computation.

  12. Money market rates and implied CCAPM rates: some international evidence

    OpenAIRE

    Yamin Ahmad

    2004-01-01

    New Neoclassical Synthesis models equate the instrument of monetary policy to the implied CCAPM rate arising from an Euler equation. This paper identifies monetary policy shocks within six of the G7 countries and examines the movement of money market and implied CCAPM rates. The key result is that an increase in the nominal interest rate leads to a fall in the implied CCAPM rate. Incorporating habit still yields the same result. The findings suggest that the movement of these two rates implie...

  13. 29 CFR 778.112 - Day rates and job rates.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Day rates and job rates. 778.112 Section 778.112 Labor... Requirements Principles for Computing Overtime Pay Based on the âregular Rateâ § 778.112 Day rates and job rates. If the employee is paid a flat sum for a day's work or for doing a particular job, without regard...

  14. Credit rating dynamics and competition

    DEFF Research Database (Denmark)

    Hirth, Stefan

    2014-01-01

    I analyze the market for credit ratings with competition between more than two rating agencies. How can honest rating behavior be achieved, and under which conditions can a new honest rating agency successfully invade a market with inflating incumbents? My model predicts cyclic dynamics...

  15. Decomposing the social discount rate

    OpenAIRE

    Scarborough, Helen

    2010-01-01

    Recent modelling of the costs and benefits of climate change has renewed debate surrounding assumptions regarding the social discount rate in analysing the impacts of environmental change. Previous literature segments the social discount rate into being influenced by two key factors; the rate of pure time preference and the elasticity of marginal utility of future consumption. These components of the social discount rate reinforce the linkages between the choice of social discount rate and in...

  16. Exchange rate smoothing in Hungary

    OpenAIRE

    Karádi, Péter

    2005-01-01

    The paper proposes a structural empirical model capable of examining exchange rate smoothing in the small, open economy of Hungary. The framework assumes the existence of an unobserved and changing implicit exchange rate target. The central bank is assumed to use interest rate policy to obtain this preferred rate in the medium term, while market participants are assumed to form rational expectations about this target and influence exchange rates accordingly. The paper applies unobserved varia...

  17. Estimating diversification rates for higher taxa: BAMM can give problematic estimates of rates and rate shifts.

    Science.gov (United States)

    Meyer, Andreas L S; Wiens, John J

    2018-01-01

    Estimates of diversification rates are invaluable for many macroevolutionary studies. Recently, an approach called BAMM (Bayesian Analysis of Macro-evolutionary Mixtures) has become widely used for estimating diversification rates and rate shifts. At the same time, several articles have concluded that estimates of net diversification rates from the method-of-moments (MS) estimators are inaccurate. Yet, no studies have compared the ability of these two methods to accurately estimate clade diversification rates. Here, we use simulations to compare their performance. We found that BAMM yielded relatively weak relationships between true and estimated diversification rates. This occurred because BAMM underestimated the number of rates shifts across each tree, and assigned high rates to small clades with low rates. Errors in both speciation and extinction rates contributed to these errors, showing that using BAMM to estimate only speciation rates is also problematic. In contrast, the MS estimators (particularly using stem group ages), yielded stronger relationships between true and estimated diversification rates, by roughly twofold. Furthermore, the MS approach remained relatively accurate when diversification rates were heterogeneous within clades, despite the widespread assumption that it requires constant rates within clades. Overall, we caution that BAMM may be problematic for estimating diversification rates and rate shifts. © 2017 The Author(s). Evolution © 2017 The Society for the Study of Evolution.

  18. National Utility Rate Database: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ong, S.; McKeel, R.

    2012-08-01

    When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

  19. The influence of sovereign credit ratings on corporate credit ratings.

    OpenAIRE

    Umutoni, Liliane

    2017-01-01

    Credit ratings have a key role in modern financial markets as they communicate crucial information on the creditworthiness of a debt issuer to investors and regulators. These credit ratings are mostly determined by three rating agencies, namely Standard & Poor’s, Moody’s and Fitch, even though, the credit rating industry counts a dozen of recognized rating agencies. Indeed, the three agencies have become the market leaders with a market share of 94.3% on the U.S market (Bloomberg, 2015) and 9...

  20. Content and ratings of mature-rated video games.

    Science.gov (United States)

    Thompson, Kimberly M; Tepichin, Karen; Haninger, Kevin

    2006-04-01

    To quantify the depiction of violence, blood, sexual themes, profanity, substances, and gambling in video games rated M (for "mature") and to measure agreement between the content observed and the rating information provided to consumers on the game box by the Entertainment Software Rating Board. We created a database of M-rated video game titles, selected a random sample, recorded at least 1 hour of game play, quantitatively assessed the content, performed statistical analyses to describe the content, and compared our observations with the Entertainment Software Rating Board content descriptors and results of our prior studies. Harvard University, Boston, Mass. Authors and 1 hired game player. M-rated video games. Percentages of game play depicting violence, blood, sexual themes, gambling, alcohol, tobacco, or other drugs; use of profanity in dialogue, song lyrics, or gestures. Although the Entertainment Software Rating Board content descriptors for violence and blood provide a good indication of such content in the game, we identified 45 observations of content that could warrant a content descriptor in 29 games (81%) that lacked these content descriptors. M-rated video games are significantly more likely to contain blood, profanity, and substances; depict more severe injuries to human and nonhuman characters; and have a higher rate of human deaths than video games rated T (for "teen"). Parents and physicians should recognize that popular M-rated video games contain a wide range of unlabeled content and may expose children and adolescents to messages that may negatively influence their perceptions, attitudes, and behaviors.

  1. 2007 Wholesale Power Rate Schedules : 2007 General Rate Schedule Provisions.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    2006-11-01

    This schedule is available for the contract purchase of Firm Power to be used within the Pacific Northwest (PNW). Priority Firm (PF) Power may be purchased by public bodies, cooperatives, and Federal agencies for resale to ultimate consumers, for direct consumption, and for Construction, Test and Start-Up, and Station Service. Rates in this schedule are in effect beginning October 1, 2006, and apply to purchases under requirements Firm Power sales contracts for a three-year period. The Slice Product is only available for public bodies and cooperatives who have signed Slice contracts for the FY 2002-2011 period. Utilities participating in the Residential Exchange Program (REP) under Section 5(c) of the Northwest Power Act may purchase Priority Firm Power pursuant to the Residential Exchange Program. Rates under contracts that contain charges that escalate based on BPA's Priority Firm Power rates shall be based on the three-year rates listed in this rate schedule in addition to applicable transmission charges. This rate schedule supersedes the PF-02 rate schedule, which went into effect October 1, 2001. Sales under the PF-07 rate schedule are subject to BPA's 2007 General Rate Schedule Provisions (2007 GRSPs). Products available under this rate schedule are defined in the 2007 GRSPs. For sales under this rate schedule, bills shall be rendered and payments due pursuant to BPA's 2007 GRSPs and billing process.

  2. Breast Cancer Rates by State

    Science.gov (United States)

    ... Associated Lung Ovarian Prostate Skin Uterine Cancer Home Breast Cancer Rates by State Language: English (US) Español (Spanish) ... from breast cancer each year. Rates of Getting Breast Cancer by State The number of people who get ...

  3. 76 FR 7879 - Fee Rate

    Science.gov (United States)

    2011-02-11

    ... NATIONAL INDIAN GAMING COMMISSION Fee Rate AGENCY: National Indian Gaming Commission. ACTION... Commission has adopted preliminary annual fee rates of 0.00% for tier 1 and 0.074% (.00074) for tier 2 for... part 518, the preliminary fee rate on class II revenues for calendar year 2011 shall be one-half of the...

  4. 78 FR 14821 - Fee Rate

    Science.gov (United States)

    2013-03-07

    ... DEPARTMENT OF THE INTERIOR National Indian Gaming Commission Fee Rate AGENCY: National Indian..., that the National Indian Gaming Commission has adopted its 2013 preliminary annual fee rates of 0.00... self-regulation under 25 CFR part 518, the 2013 preliminary fee rate on Class II revenues shall be one...

  5. 75 FR 5342 - Fee Rate

    Science.gov (United States)

    2010-02-02

    ... NATIONAL INDIAN GAMING COMMISSION Fee Rate AGENCY: National Indian Gaming Commission. ACTION... Commission has adopted preliminary annual fee rates of 0.00% for tier 1 and 0.060% (.00060) for tier 2 for... part 518, the preliminary fee rate on class II revenues for calendar year 2010 shall be one-half of the...

  6. 77 FR 5267 - Fee Rate

    Science.gov (United States)

    2012-02-02

    ... NATIONAL INDIAN GAMING COMMISSION Fee Rate AGENCY: National Indian Gaming Commission. ACTION... Commission has adopted preliminary annual fee rates of 0.00% for tier 1 and 0.074% (.00074) for tier 2 for... part 518, the preliminary fee rate on class II revenues for calendar year 2012 shall be one-half of the...

  7. 75 FR 44807 - Fee Rate

    Science.gov (United States)

    2010-07-29

    ... NATIONAL INDIAN GAMING COMMISSION Fee Rate AGENCY: National Indian Gaming Commission. ACTION... Commission has adopted final annual fee rates of 0.00% for tier 1 and 0.060% (.00060) for tier 2 for calendar... 518, the preliminary fee rate on class II revenues for calendar year 2010 shall be one-half of the...

  8. 76 FR 38207 - Fee Rate

    Science.gov (United States)

    2011-06-29

    ... NATIONAL INDIAN GAMING COMMISSION Fee Rate AGENCY: National Indian Gaming Commission. ACTION... Commission has adopted final annual fee rates of 0.00% for tier 1 and 0.074% (.00074) for tier 2 for calendar... 518, the final fee rate on class II revenues for calendar year 2011 shall be one-half of the annual...

  9. 77 FR 41202 - Fee Rate

    Science.gov (United States)

    2012-07-12

    ... NATIONAL INDIAN GAMING COMMISSION Fee Rate AGENCY: National Indian Gaming Commission. ACTION... Commission has adopted final annual fee rates of 0.00% for tier 1 and 0.074% (.00074) for tier 2 for calendar... 518, the final fee rate on class II revenues for calendar year 2012 shall be one-half of the annual...

  10. Heart rate monitoring mobile applications

    OpenAIRE

    Chaudhry, Beenish M.

    2016-01-01

    Total number of times a heart beats in a minute is known as the heart rate. Traditionally, heart rate was measured using clunky gadgets but these days it can be measured with a smartphone?s camera. This can help you measure your heart rate anywhere and at anytime, especially during workouts so you can adjust your workout intensity to achieve maximum health benefits. With simple and easy to use mobile app, ?Unique Heart Rate Monitor?, you can also maintain your heart rate history for personal ...

  11. Heart rate monitoring mobile applications.

    Science.gov (United States)

    Chaudhry, Beenish M

    2016-01-01

    Total number of times a heart beats in a minute is known as the heart rate. Traditionally, heart rate was measured using clunky gadgets but these days it can be measured with a smartphone's camera. This can help you measure your heart rate anywhere and at anytime, especially during workouts so you can adjust your workout intensity to achieve maximum health benefits. With simple and easy to use mobile app, 'Unique Heart Rate Monitor', you can also maintain your heart rate history for personal reflection and sharing with a provider.

  12. Legal issues of tax rates

    OpenAIRE

    Sadílek, Jiří

    2010-01-01

    Tax rate problems The subject of the graduation thesis is legal problems of tax rate. The aim of this thesis is description and estimation of the flat tax rate and states, where is established. First of all I define the basic kinds of tax systems - the tax system with one tax rate, the progressive tax system and the flat tax system. Further I deal with the principles and elements of the flat tax rate as interpreted by American economists Robert E. Hall and Alvin Rabushka who are generally ack...

  13. Aggregate Social Discount Rate Derived from Individual Discount Rates

    OpenAIRE

    Kenneth F. Reinschmidt

    2002-01-01

    In the economic evaluation of large public-sector projects, an aggregate social discount rate may be used in present worth comparison of alternatives. This paper uses the assumptions that individual discount rates are constant over time and approximately Normally distributed across the affected population, with mean \\mu and variance \\sigma 2 , to derive an aggregate discount function that is exponential in form but with time-dependent aggregate discount rate \\rho (t) = \\mu - \\sigma 2 t/2, whe...

  14. Female literacy rate is a better predictor of birth rate and infant mortality rate in India

    Directory of Open Access Journals (Sweden)

    Suman Saurabh

    2013-01-01

    Full Text Available Background: Educated women are known to take informed reproductive and healthcare decisions. These result in population stabilization and better infant care reflected by lower birth rates and infant mortality rates (IMRs, respectively. Materials and Methods: Our objective was to study the relationship of male and female literacy rates with crude birth rates (CBRs and IMRs of the states and union territories (UTs of India. The data were analyzed using linear regression. CBR and IMR were taken as the dependent variables; while the overall literacy rates, male, and female literacy rates were the independent variables. Results: CBRs were inversely related to literacy rates (slope parameter = -0.402, P < 0.001. On multiple linear regression with male and female literacy rates, a significant inverse relationship emerged between female literacy rate and CBR (slope = -0.363, P < 0.001, while male literacy rate was not significantly related to CBR (P = 0.674. IMR of the states were also inversely related to their literacy rates (slope = -1.254, P < 0.001. Multiple linear regression revealed a significant inverse relationship between IMR and female literacy (slope = -0.816, P = 0.031, whereas male literacy rate was not significantly related (P = 0.630. Conclusion: Female literacy is relatively highly important for both population stabilization and better infant health.

  15. Understanding High Rate Behavior Through Low Rate Analog

    Science.gov (United States)

    2014-04-28

    challenges in high rate character- isation of polymers. The most important is that, owing to their low stress wavespeed, the structural response of...box’ tool, to provide supporting date for the rate dependent mechanical character- isation . Experiments were performed on a TA instruments Q800

  16. 15 CFR 700.3 - Priority ratings and rated orders.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Priority ratings and rated orders. 700.3 Section 700.3 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE...

  17. Effects of Liraglutide on Heart Rate and Heart Rate Variability

    DEFF Research Database (Denmark)

    Kumarathurai, Preman; Anholm, Christian; Larsen, Bjørn Strøier

    2017-01-01

    OBJECTIVE: Reduced heart rate variability (HRV) and increased heart rate (HR) have been associated with cardiovascular mortality. Glucagon-like peptide 1 receptor agonists (GLP-1 RAs) increase HR, and studies have suggested that they may reduce HRV. We examined the effect of the GLP-1 RA...

  18. Rate My Stake: Interpretation of Ordinal Stake Ratings

    Science.gov (United States)

    Patricia Lebow; Grant Kirker

    2014-01-01

    Ordinal rating systems are commonly employed to evaluate biodeterioration of wood exposed outdoors over long periods of time. The purpose of these ratings is to compare the durability of test systems to nondurable wood products or known durable wood products. There are many reasons why these systems have evolved as the chosen method of evaluation, including having an...

  19. The foreign exchange rate rate exposure of nations

    OpenAIRE

    Entorf, Horst; Moebert, Jochen; Sonderhof, Katja

    2007-01-01

    Following the well-known approach by Adler and Dumas (1984) we evaluate the foreign exchange rate exposure of nations. Results based on data from 27 countries show that national foreign exchange rate exposures are significantly related to the current trade balance variables of corresponding economies.

  20. The optimal rating philosophy for the rating of SMEs

    NARCIS (Netherlands)

    Rikkers, F.; Thibeault, A.

    2007-01-01

    The objective of this research is to determine the optimal rating philosophy for the rating of SMEs, and to describe the consequences of the chosen philosophy on several related aspects. As to our knowledge, this is the first paper that studies the considerations of financial institutions on what

  1. FLAMES IN TYPE Ia SUPERNOVA: DEFLAGRATION-DETONATION TRANSITION IN THE OXYGEN-BURNING FLAME

    International Nuclear Information System (INIS)

    Woosley, S. E.; Kerstein, A. R.; Aspden, A. J.

    2011-01-01

    The flame in a Type Ia supernova is a conglomerate structure that, depending on density, may involve separate regions of carbon, oxygen, and silicon burning, all propagating in a self-similar, subsonic front. The separation between these three burning regions increases as the density declines until eventually, below about 2 x 10 7 g cm -3 , only carbon burning remains active, the other two burning phases having 'frozen out' on stellar scales. Between 2 and 3 x 10 7 g cm -3 , however, there remains an energetic oxygen-burning region that trails the carbon burning by an amount that is sensitive to the turbulence intensity. As the carbon flame makes a transition to the distributed regime (Karlovitz number ∼> 10), the characteristic separation between the carbon- and oxygen-burning regions increases dramatically, from a fraction of a meter to many kilometers. The oxygen-rich mixture between the two flames is created at a nearly constant temperature, and turbulence helps to maintain islands of well-mixed isothermal fuel as the temperature increases. The delayed burning of these regions can be supersonic and could initiate a detonation.

  2. Phenomenology of deflagration and detonation of hydrogen-air mixtures in water cooled nuclear power plants

    International Nuclear Information System (INIS)

    Lombardi, G.

    1984-01-01

    This paper summarizes fundamentals of the flammability of the hydrogen-air mixtures and hydrogen-air containing added steam or other inerting agent. The flammability behaviour of such gaseous mixtures is described with reference to physical and chemical conditions close enough to those expected in the containment of a nuclear reactor during a LOCA

  3. Numerical Simulation of the Deflagration-to-Detonation Transition in Inhomogeneous Mixtures

    Directory of Open Access Journals (Sweden)

    Florian Ettner

    2014-01-01

    different modes of DDT. Detonations occurring soon after ignition do not necessarily cause the highest pressure loads. In mixtures with concentration gradient, the highest loads can occur in regions of very low hydrogen content. These new findings should be considered in future safety studies.

  4. Deflagration to Detonation Transition (DDT) Simulations of HMX Powder Using the HERMES Model

    Science.gov (United States)

    White, Bradley; Reaugh, John; Tringe, Joseph

    2017-06-01

    We performed computer simulations of DDT experiments with Class I HMX powder using the HERMES model (High Explosive Response to MEchanical Stimulus) in ALE3D. Parameters for the model were fitted to the limited available mechanical property data of the low-density powder, and to the Shock to Detonation Transition (SDT) test results. The DDT tests were carried out in steel-capped polycarbonate tubes. This arrangement permits direct observation of the event using both flash X-ray radiography and high speed camera imaging, and provides a stringent test of the model. We found the calculated detonation transition to be qualitatively similar to experiment. Through simulation we also explored the effects of confinement strength, the HMX particle size distribution and porosity on the computed detonation transition location. This work was performed under the auspices of the US DOE by LLNL under Contract DE-AC52-07NA27344.

  5. Equilibrium based analytical model for estimation of pressure magnification during deflagration of hydrogen air mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Karanam, Aditya; Sharma, Pavan K.; Ganju, Sunil; Singh, Ram Kumar [Bhabha Atomic Research Centre (BARC), Mumbai (India). Reactor Safety Div.

    2016-12-15

    During postulated accident sequences in nuclear reactors, hydrogen may get released from the core and form a flammable mixture in the surrounding containment structure. Ignition of such mixtures and the subsequent pressure rise are an imminent threat for safe and sustainable operation of nuclear reactors. Methods for evaluating post ignition characteristics are important for determining the design safety margins in such scenarios. This study presents two thermo-chemical models for determining the post ignition state. The first model is based on internal energy balance while the second model uses the concept of element potentials to minimize the free energy of the system with internal energy imposed as a constraint. Predictions from both the models have been compared against published data over a wide range of mixture compositions. Important differences in the regions close to flammability limits and for stoichiometric mixtures have been identified and explained. The equilibrium model has been validated for varied temperatures and pressures representative of initial conditions that may be present in the containment during accidents. Special emphasis has been given to the understanding of the role of dissociation and its effect on equilibrium pressure, temperature and species concentrations.

  6. Visualization and Measurement of the Deflagration of JA2 Bonded to Various Metal Foils

    Science.gov (United States)

    2016-01-01

    foil. Tapes had an acrylic -adhesive backing applied by the manufacturer. The conductive material, whether foil or tape, ran approximately ¾ the...event were obtained such that the 0.5-inch surface was facing the camera with the foil on the right edge. The thicknesses and tape/foil configuration...adhesive type, there were differences. A 2-mil Al tape was obtained from McMaster-Carr (product No. 7925A1). It had a 2- mil-thick acrylic adhesive

  7. Critical velocities for deflagration and detonation triggered by voids in a REBO high explosive

    Energy Technology Data Exchange (ETDEWEB)

    Herring, Stuart Davis [Los Alamos National Laboratory; Germann, Timothy C [Los Alamos National Laboratory; Jensen, Niels G [Los Alamos National Laboratory

    2010-01-01

    The effects of circular voids on the shock sensitivity of a two-dimensional model high explosive crystal are considered. We simulate a piston impact using molecular dynamics simulations with a Reactive Empirical Bond Order (REBO) model potential for a sub-micron, sub-ns exothermic reaction in a diatomic molecular solid. The probability of initiating chemical reactions is found to rise more suddenly with increasing piston velocity for larger voids that collapse more deterministically. A void with radius as small as 10 nm reduces the minimum initiating velocity by a factor of 4. The transition at larger velocities to detonation is studied in a micron-long sample with a single void (and its periodic images). The reaction yield during the shock traversal increases rapidly with velocity, then becomes a prompt, reliable detonation. A void of radius 2.5 nm reduces the critical velocity by 10% from the perfect crystal. A Pop plot of the time-to-detonation at higher velocities shows a characteristic pressure dependence.

  8. Equilibrium based analytical model for estimation of pressure magnification during deflagration of hydrogen air mixtures

    International Nuclear Information System (INIS)

    Karanam, Aditya; Sharma, Pavan K.; Ganju, Sunil; Singh, Ram Kumar

    2016-01-01

    During postulated accident sequences in nuclear reactors, hydrogen may get released from the core and form a flammable mixture in the surrounding containment structure. Ignition of such mixtures and the subsequent pressure rise are an imminent threat for safe and sustainable operation of nuclear reactors. Methods for evaluating post ignition characteristics are important for determining the design safety margins in such scenarios. This study presents two thermo-chemical models for determining the post ignition state. The first model is based on internal energy balance while the second model uses the concept of element potentials to minimize the free energy of the system with internal energy imposed as a constraint. Predictions from both the models have been compared against published data over a wide range of mixture compositions. Important differences in the regions close to flammability limits and for stoichiometric mixtures have been identified and explained. The equilibrium model has been validated for varied temperatures and pressures representative of initial conditions that may be present in the containment during accidents. Special emphasis has been given to the understanding of the role of dissociation and its effect on equilibrium pressure, temperature and species concentrations.

  9. BANK RATING. A COMPARATIVE ANALYSIS

    Directory of Open Access Journals (Sweden)

    Batrancea Ioan

    2015-07-01

    Full Text Available Banks in Romania offers its customers a wide range of products but which involves both risk taking. Therefore researchers seek to build rating models to help managers of banks to risk of non-recovery of loans and interest. In the following we highlight rating Raiffeisen Bank, BCR-ERSTE Bank and Transilvania Bank, based on the models CAAMPL and Stickney making a comparative analysis of the two rating models.

  10. Can Exchange Rates Be Predicted?

    OpenAIRE

    Siriwutiset, Trin

    2007-01-01

    Foreign exchange rates produce significant impacts on both the macroeconomic and microeconomic scale. Countries� government and multinational companies have been seeking ways to stabilize the exchange rates for a few decades. However, there is no perfect consensus on methods to control and stabilize the exchange rates. In fact, there are several occasions in history where turbulence movements caused crisis in the economies. There are several factors that are identified by economis...

  11. Management of interest rate risk

    Directory of Open Access Journals (Sweden)

    Šabović Šerif

    2014-01-01

    Full Text Available Interest rate risk is one of the biggest and most dangerous risks that a bank is exposed to. When a change of interest rates occurs, the incomes of a bank based on credits and securities endure significant changes. Banks resources also endure some changes. The change of interest rates changes the value of the assets and liabilities of the bank and it's net and investment worth . The change of interest rates also affects bank's balance sheet, income sheet statement and bank's share capital.

  12. Spontaneous mutation rates and the rate-doubling dose

    International Nuclear Information System (INIS)

    Von Borstel, R.C.; Moustaccki, E.; Latarjet, R.

    1978-01-01

    The amount of radiation required to double the frequency of mutations or tumours over the rate of those that occur spontaneously is called the rate-doubling dose. An equivalent concept has been proposed for exposure to other environmental mutagens. The doubling dose concept is predicated on the assumption that all human populations have the same spontaneous mutation rate, and that this spontaneous mutation rate is known. It is now established for prokaryotes and lower eukaryotes that numerous genes control the spontaneous mutation rate, and it is likely that the same is true for human cells as well. Given that the accepted mode of evolution of human populatons is from small, isolated groups of individuals, it seems likely that each population would have a different spontaneous mutation rate. Given that a minimum of twenty genes control or affect the spontaneous mutation rate, and that each of these in turn is susceptible to spontaneously arising or environmentally induced mutations, it seems likely that every individual within a population (except for siblings from identical multiple births) will have a unique spontaneous mutation rate. If each individual in a population does have a different spontaneous mutation rate, the doubling dose concept, in rigorous terms, is fallacious. Therefore, as with other concepts of risk evaluation, the doubling dose concept is subject to criticism. Nevertheless, until we know individual spontaneous mutation rates with precision, and can evaluate risks based on this information, the doubling dose concept has a heuristic value and is needed for practical assessment of risks for defined populations. (author)

  13. Failure Rates in Introductory Programming

    DEFF Research Database (Denmark)

    Bennedsen, Jens; Caspersen, Michael Edelgaard

    2007-01-01

    It is a common conception that CS1 is a very difficult course and that failure rates are high. However, until now there has only been anecdotal evidence for this claim. This article reports on a survey among institutions around the world regarding failure rates in introductory programming courses...

  14. Nontraditional Student Graduation Rate Benchmarks

    Science.gov (United States)

    Miller, Nathan B.

    2014-01-01

    The prominence of discourse on postsecondary degree completion, student persistence, and retention has increased in the national dialogue. Heightened attention to college completion rates by the federal government and pressure to tie state funding to performance metrics associated with graduation rates are catalysts for the discussion.…

  15. Can you Trust Online Ratings?

    DEFF Research Database (Denmark)

    Wulff, Julie; Hardt, Daniel

    2014-01-01

    Do user populations differ systematically in the way they express and rate sentiment? We use large collections of Danish and U.S. reviews to investigate this question, and we find evidence of important systematic differences: first, positive ratings are far more common in the U.S. data than in th...

  16. What Is a Reaction Rate?

    Science.gov (United States)

    Schmitz, Guy

    2005-01-01

    The definition of reaction rate is derived and demonstrations are made for the care to be taken while using the term. Reaction rate can be in terms of a reaction property, the extent of reaction and thus it is possible to give a definition applicable in open and closed systems.

  17. Rate of volcanism on Venus

    International Nuclear Information System (INIS)

    Fegley, B. Jr.; Prinn, R.G.

    1988-07-01

    The maintenance of the global H 2 SO 4 clouds on Venus requires volcanism to replenish the atmospheric SO 2 which is continually being removed from the atmosphere by reaction with calcium minerals on the surface of Venus. The first laboratory measurements of the rate of one such reaction, between SO 2 and calcite (CaCO 3 ) to form anhydrite (CaSO 4 ), are reported. If the rate of this reaction is representative of the SO 2 reaction rate at the Venus surface, then we estimate that all SO 2 in the Venus atmosphere (and thus the H 2 SO 4 clouds) will be removed in 1.9 million years unless the lost SO 2 is replenished by volcanism. The required rate of volcanism ranges from about 0.4 to about 11 cu km of magma erupted per year, depending on the assumed sulfur content of the erupted material. If this material has the same composition as the Venus surface at the Venera 13, 14 and Vega 2 landing sites, then the required rate of volcanism is about 1 cu km per year. This independent geochemically estimated rate can be used to determine if either (or neither) of the two discordant (2 cu km/year vs. 200 to 300 cu km/year) geophysically estimated rates is correct. The geochemically estimated rate also suggests that Venus is less volcanically active than the Earth

  18. Lung Cancer Rates by State

    Science.gov (United States)

    ... the Biggest Cancer Killer in Both Men and Women” Stay Informed Rates by State for Other Kinds of Cancer All Cancers Combined Breast Cervical Colorectal (Colon) HPV-Associated Ovarian Prostate Skin Uterine Cancer Home Lung Cancer Rates by State Language: English (US) ...

  19. Temporal Trends in Fertility Rates

    DEFF Research Database (Denmark)

    Jensen, Martin Blomberg; Priskorn, Lærke; Jensen, Tina Kold

    2015-01-01

    OBJECTIVE: Increasing age at first childbirth has been suggested to increase the risk for infertility. Our objective is to determine whether women above thirty years of age historically have been able to sustain fertility rates above replacement level. DESIGN: A descriptive nationwide Danish study...... to determine total and age specific fertility rates. RESULTS: Total fertility rate (TFR) decreased from 4.1 to 1.8 children per woman and age specific fertility also decreased from 1901 to 2014. Women aged 30-34, 35-39 or 40-44 years in the first decade of the 20th century had higher fertility rates than...... for 10% of TFR in 1901 compared with 4% in 2014 despite usage of assisted reproduction. CONCLUSION: This nationwide study shows that women above 30 years of age historically have been able to sustain fertility rates above replacement level. This implies that other factors besides age are strong...

  20. The Logic of Collective Rating

    Science.gov (United States)

    Nax, Heinrich

    2016-05-01

    The introduction of participatory rating mechanisms on online sales platforms has had substantial impact on firms' sales and profits. In this note, we develop a dynamic model of consumer influences on ratings and of rating influences on consumers, focussing on standard 5-star mechanisms as implemented by many platforms. The key components of our social influence model are the consumer trust in the `wisdom of crowds' during the purchase phase and indirect reciprocity during the rating decision. Our model provides an overarching explanation for well-corroborated empirical regularities. We quantify the performance of the voluntary rating mechanism in terms of realized consumer surplus with the no-mechanism and full-information benchmarks, and identify how it could be improved.

  1. High Rate Digital Demodulator ASIC

    Science.gov (United States)

    Ghuman, Parminder; Sheikh, Salman; Koubek, Steve; Hoy, Scott; Gray, Andrew

    1998-01-01

    The architecture of High Rate (600 Mega-bits per second) Digital Demodulator (HRDD) ASIC capable of demodulating BPSK and QPSK modulated data is presented in this paper. The advantages of all-digital processing include increased flexibility and reliability with reduced reproduction costs. Conventional serial digital processing would require high processing rates necessitating a hardware implementation in other than CMOS technology such as Gallium Arsenide (GaAs) which has high cost and power requirements. It is more desirable to use CMOS technology with its lower power requirements and higher gate density. However, digital demodulation of high data rates in CMOS requires parallel algorithms to process the sampled data at a rate lower than the data rate. The parallel processing algorithms described here were developed jointly by NASA's Goddard Space Flight Center (GSFC) and the Jet Propulsion Laboratory (JPL). The resulting all-digital receiver has the capability to demodulate BPSK, QPSK, OQPSK, and DQPSK at data rates in excess of 300 Mega-bits per second (Mbps) per channel. This paper will provide an overview of the parallel architecture and features of the HRDR ASIC. In addition, this paper will provide an over-view of the implementation of the hardware architectures used to create flexibility over conventional high rate analog or hybrid receivers. This flexibility includes a wide range of data rates, modulation schemes, and operating environments. In conclusion it will be shown how this high rate digital demodulator can be used with an off-the-shelf A/D and a flexible analog front end, both of which are numerically computer controlled, to produce a very flexible, low cost high rate digital receiver.

  2. Implantation rate effects on microstructure

    International Nuclear Information System (INIS)

    Choyke, W.J.; Spitznagel, J.A.; Wood, S.; Doyle, N.J.

    1981-01-01

    We report a detailed TEM study of rate effects in a metal (304 SS) where we dope with an insoluble atom (He) and create the displacement damage with high energy Si. The rates of doping and the rates of producing lattice damage are independently varied during dual implantation. In addition to varying the doping rates of the He the magnitude of the displacement damage prior to He implantation is also varied (beam history). We find that the beam history has virtually no effect on maximum bubble size but it has a major effect on the average cavity diameter. A weak dependence of cavity number density on helium implantation rate is found. The total dislocation density is relatively independent of the doping rate and beam history at 550 and 700 0 C, whereas the loop fraction is sensitive to beam history at these temperatures. Acicular precipitate formation is weakly dependent on doping, doping rate and more strongly dependent on doping concentration and temperature. This form of solute segregation is very sensitive to beam history. (orig.)

  3. Relaxed Poisson cure rate models.

    Science.gov (United States)

    Rodrigues, Josemar; Cordeiro, Gauss M; Cancho, Vicente G; Balakrishnan, N

    2016-03-01

    The purpose of this article is to make the standard promotion cure rate model (Yakovlev and Tsodikov, ) more flexible by assuming that the number of lesions or altered cells after a treatment follows a fractional Poisson distribution (Laskin, ). It is proved that the well-known Mittag-Leffler relaxation function (Berberan-Santos, ) is a simple way to obtain a new cure rate model that is a compromise between the promotion and geometric cure rate models allowing for superdispersion. So, the relaxed cure rate model developed here can be considered as a natural and less restrictive extension of the popular Poisson cure rate model at the cost of an additional parameter, but a competitor to negative-binomial cure rate models (Rodrigues et al., ). Some mathematical properties of a proper relaxed Poisson density are explored. A simulation study and an illustration of the proposed cure rate model from the Bayesian point of view are finally presented. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Heart rate response to breathing

    DEFF Research Database (Denmark)

    Mehlsen, J; Pagh, K; Nielsen, J S

    1987-01-01

    Heart rate responses to stepwise and periodic changes in lung volume were studied in seven young healthy males. Stepwise inspiration and expiration both resulted in an increase in heart rate followed by a rapid decrease in heart rate. The fastest heart rate was reached in 1.6 +/- 0.5 s and in 3.......6 +/- 1.4 s in response to inspiration and expiration, respectively (P less than 0.01). The slowest heart rate was reached in 4.8 +/- 1.0 s and in 7.6 +/- 1.9 s in response to inspiration and expiration, respectively (P less than 0.01). Following this biphasic change the heart rate returned to a steady...... level. The difference between the fastest and the slowest heart rates was significantly larger in response to inspiration (21.7 +/- 7.3 beats per minute) than in response to expiration (12.0 +/- 7.3 beats per minute; P less than 0.01). Periodic changes in lung volume were performed with frequencies from...

  5. The Optimal Interest Rates and the Current Interest Rate System

    Directory of Open Access Journals (Sweden)

    Ioannis N. Kallianiotis

    2014-12-01

    Full Text Available The paper discusses the current target interest rate, which is closed to zero with the new experiment of quantitative easing since 2009 and has reduced the rate of return and the income and has made the real savings rate negative. This target rate has not reduced unemployment and has not improved growth (it is not optimal, but has increased the debt of individuals and the low taxes on businesses have magnified the budget deficits and the national debt. People were borrowing the present value of their uncertain future wealth and their high debt and low income raise the risk and this high risk premium heighten the interest rate on loans, especially on credit cards. The current monetary system needs to be changed and an interest rate floor on deposits (savings and an interest rate ceiling on individuals‟ loans (borrowings is necessary to improve social welfare, fairness, and justice in our society and not to support only disintermediation (financial markets. The middle class cannot work only to pay taxes and interest on its debt (redistribution of their wealth to government and banks or worse to be in chronic unemployment. Many home owners defaulted on their loans payments and their homes are foreclosed. They will end up without property (real assets. The unconcern towards the middle class will affect negatively the entire socio-economic structure of the nation and after losing its productive power, it will start declining, as history has shown to us with so many empires that do not exist anymore. We hope the leaders (the democratic governments to improve public policies, to regulate the financial market and institutions, and to satisfy their policy ultimate objective, which is citizens‟ perfection and the nation‟s highest point of prosperity.

  6. Blood Pressure vs. Heart Rate

    Science.gov (United States)

    ... Peripheral Artery Disease Venous Thromboembolism Aortic Aneurysm More Blood Pressure vs. Heart Rate (Pulse) Updated:Nov 13,2017 ... This content was last reviewed October 2016. High Blood Pressure • Home • Get the Facts About HBP Introduction What ...

  7. Comprehensive Error Rate Testing (CERT)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Centers for Medicare and Medicaid Services (CMS) implemented the Comprehensive Error Rate Testing (CERT) program to measure improper payments in the Medicare...

  8. Rate Adaptive OFDMA Communication Systems

    International Nuclear Information System (INIS)

    Abdelhakim, M.M.M.

    2009-01-01

    Due to the varying nature of the wireless channels, adapting the transmission parameters, such as code rate, modulation order and power, in response to the channel variations provides a significant improvement in the system performance. In the OFDM systems, Per-Frame adaptation (PFA) can be employed where the transmission variables are fixed over a given frame and may change from one frame to the other. Subband (tile) loading offers more degrees of adaptation such that each group of carriers (subband) uses the same transmission parameters and different subbands may use different parameters. Changing the code rate for each tile in the same frame, results in transmitting multiple codewords (MCWs) for a single frame. In this thesis a scheme is proposed for adaptively changing the code rate of coded OFDMA systems via changing the puncturing rate within a single codeword (SCW). In the proposed structure, the data is encoded with the lowest available code rate then it is divided among the different tiles where it is punctured adaptively based on some measure of the channel quality for each tile. The proposed scheme is compared against using multiple codewords (MCWs) where the different code rates for the tiles are obtained using separate encoding processes. For bit interleaved coded modulation architecture two novel interleaving methods are proposed, namely the puncturing dependant interleaver (PDI) and interleaved puncturing (IntP), which provide larger interleaving depth. In the PDI method the coded bits with the same rate over different tiles are grouped for interleaving. In IntP structure the interleaving is performed prior to puncturing. The performance of the adaptive puncturing technique is investigated under constant bit rate constraint and variable bit rate. Two different adaptive modulation and coding (AMC) selection methods are examined for variable bit rate adaptive system. The first is a recursive scheme that operates directly on the SNR whereas the second

  9. Risk, ambiguity and sovereign rating

    OpenAIRE

    Di Caro, Paolo

    2014-01-01

    Decisions of investing in sovereign assets involve both risk and ambiguity. Ambiguity arises from unknown elements characterizing the value of a generic sovereign. In presence of ambiguity, ambiguity-averse investors are prone to pay for obtaining summary information such as ratings which reduces ambiguity. Ambiguity-neutral and ambiguity-averse investors, then, make decisions on the basis of different informative sources. By presenting a simple model of sovereign rating under ambiguity, thre...

  10. Reaction rate of propene pyrolysis.

    Science.gov (United States)

    Han, Peipei; Su, Kehe; Liu, Yan; Wang, Yanli; Wang, Xin; Zeng, Qingfeng; Cheng, Laifei; Zhang, Litong

    2011-10-01

    The reaction rate of propene pyrolysis was investigated based on the elementary reactions proposed in Qu et al., J Comput Chem 2009, 31, 1421. The overall reaction rate was developed with the steady-state approximation and the rate constants of the elementary reactions were determined with the variational transition state theory. For the elementary reaction having transition state, the vibrational frequencies of the selected points along the minimum energy path were calculated with density functional theory at B3PW91/6-311G(d,p) level and the energies were improved with the accurate model chemistry method G3(MP2). For the elementary reaction without transition state, the frequencies were calculated with CASSCF/6-311G(d,p) and the energies were refined with the multireference configuration interaction method MRCISD/6-311G(d,p). The rate constants were evaluated within 200-2000 K and the fitted three-parameter expressions were obtained. The results are consistent with those in the literatures in most cases. For the overall rate, it was found that the logarithm of the rate and the reciprocal temperature have excellent linear relationship above 400 K, predicting that the rate follows a typical first-order law at high temperatures of 800-2000 K, which is also consistent with the experiments. The apparent activation energy in 800-2000 K is 317.3 kJ/mol from the potential energy surface of zero Kelvin. This value is comparable with the energy barriers, 365.4 and 403.7 kJ/mol, of the rate control steps. However, the apparent activation energy, 215.7 kJ/mol, developed with the Gibbs free energy surface at 1200 K is consistent with the most recent experimental result 201.9 ± 0.6 kJ/mol. Copyright © 2011 Wiley Periodicals, Inc.

  11. Rating af banker og banksystemer

    DEFF Research Database (Denmark)

    Grosen, Anders

    2010-01-01

    Banksystemer over hele verdenen er med nød og næppe blevet reddet af diverse statslige hjælpepakker. Derfor er der i disse år øget fokus på banker og banksystemers rating. Denne interesse bliver ikke mindre af, at de statslige garantier til bankerne i mange lande udløber i de kommende år. Rating ...

  12. Evaporation rate of nucleating clusters.

    Science.gov (United States)

    Zapadinsky, Evgeni

    2011-11-21

    The Becker-Döring kinetic scheme is the most frequently used approach to vapor liquid nucleation. In the present study it has been extended so that master equations for all cluster configurations are included into consideration. In the Becker-Döring kinetic scheme the nucleation rate is calculated through comparison of the balanced steady state and unbalanced steady state solutions of the set of kinetic equations. It is usually assumed that the balanced steady state produces equilibrium cluster distribution, and the evaporation rates are identical in the balanced and unbalanced steady state cases. In the present study we have shown that the evaporation rates are not identical in the equilibrium and unbalanced steady state cases. The evaporation rate depends on the number of clusters at the limit of the cluster definition. We have shown that the ratio of the number of n-clusters at the limit of the cluster definition to the total number of n-clusters is different in equilibrium and unbalanced steady state cases. This causes difference in evaporation rates for these cases and results in a correction factor to the nucleation rate. According to rough estimation it is 10(-1) by the order of magnitude and can be lower if carrier gas effectively equilibrates the clusters. The developed approach allows one to refine the correction factor with Monte Carlo and molecular dynamic simulations.

  13. Community Rates of Breastfeeding Initiation.

    Science.gov (United States)

    Grubesic, Tony H; Durbin, Kelly M

    2016-11-01

    Breastfeeding initiation rates vary considerably across racial and ethnic groups, maternal age, and education level, yet there are limited data concerning the influence of geography on community rates of breastfeeding initiation. This study aimed to describe how community rates of breastfeeding initiation vary in geographic space, highlighting "hot spots" and "cool spots" of initiation and exploring the potential connections between race, socioeconomic status, and urbanization levels on these patterns. Birth certificate data from the Kentucky Department of Health for 2004-2010 were combined with county-level geographic base files, Census 2010 demographic and socioeconomic data, and Rural-Urban Continuum Codes to conduct a spatial statistical analysis of community rates of breastfeeding initiation. Between 2004 and 2010, the average rate of breastfeeding initiation for Kentucky increased from 43.84% to 49.22%. Simultaneously, the number of counties identified as breastfeeding initiation hot spots also increased, displaying a systematic geographic pattern in doing so. Cool spots of breastfeeding initiation persisted in rural, Appalachian Kentucky. Spatial regression results suggested that unemployment, income, race, education, location, and the availability of International Board Certified Lactation Consultants are connected to breastfeeding initiation. Not only do spatial analytics facilitate the identification of breastfeeding initiation hot spots and cool spots, but they can be used to better understand the landscape of breastfeeding initiation and help target breastfeeding education and/or support efforts.

  14. Inflation Rate Modelling in Indonesia

    Directory of Open Access Journals (Sweden)

    Rezzy Eko Caraka

    2016-10-01

    Full Text Available The purposes of this research were to analyse: (i Modelling the inflation rate in Indonesia with parametric regression. (ii Modelling the inflation rate in Indonesia using non-parametric regression spline multivariable (iii Determining the best model the inflation rate in Indonesia (iv Explaining the relationship inflation model parametric and non-parametric regression spline multivariable. Based on the analysis using the two methods mentioned the coefficient of determination (R2 in parametric regression of 65.1% while non-parametric amounted to 99.39%. To begin with, the factor of money supply or money stock, crude oil prices and the rupiah exchange rate against the dollar is significant on the rate of inflation. The stability of inflation is essential to support sustainable economic development and improve people's welfare. In conclusion, unstable inflation will complicate business planning business activities, both in production and investment activities as well as in the pricing of goods and services produced.DOI: 10.15408/etk.v15i2.3260

  15. Decreasing incidence rates of bacteremia

    DEFF Research Database (Denmark)

    Nielsen, Stig Lønberg; Pedersen, C; Jensen, T G

    2014-01-01

    BACKGROUND: Numerous studies have shown that the incidence rate of bacteremia has been increasing over time. However, few studies have distinguished between community-acquired, healthcare-associated and nosocomial bacteremia. METHODS: We conducted a population-based study among adults with first......-time bacteremia in Funen County, Denmark, during 2000-2008 (N = 7786). We reported mean and annual incidence rates (per 100,000 person-years), overall and by place of acquisition. Trends were estimated using a Poisson regression model. RESULTS: The overall incidence rate was 215.7, including 99.0 for community......-acquired, 50.0 for healthcare-associated and 66.7 for nosocomial bacteremia. During 2000-2008, the overall incidence rate decreased by 23.3% from 254.1 to 198.8 (3.3% annually, p incidence rate of community-acquired bacteremia decreased by 25.6% from 119.0 to 93.8 (3.7% annually, p

  16. Automatic Strain-Rate Controller,

    Science.gov (United States)

    1976-12-01

    D—AO37 9~e2 ROME AIR DEVELOPMENT CENTER GRIFFISS AFB N 1’ FIG 13/ 6AUTOMATIC STRAIN—RATE CONTROLLER, (U) DEC 76 R L HUNTSINGER. J A ADAMSK I...goes to zero. CONTROLLER, Leeds and Northrup Series 80 CAT with proportional band , rate , reset, and approach controls . Input from deviation output...8) through ( 16) . (8) Move the set-point slowl y up to 3 or 4. (9) If the recorder po inter hunts , adjust the func t ion controls on tine Ser

  17. Containment leakage rate testing requirements

    International Nuclear Information System (INIS)

    Arndt, E.G.

    1992-01-01

    This report presents the status of several documents under revision or development that provide requirements and guidance for testing nuclear power plant containment systems for leakage rates. These documents include the general revision to 10 CFR Part 50, Appendix J; the regulatory guide affiliated with the revision to Appendix J; the national standard that the regulatory guide endorses, ANSI/ANS-56.8, 'Containment System Leakage Rate Testing Requirements'; and the draft industry Licensing Topical Report, 'Standardized Program for Primary Containment Integrity Testing'. The actual or potential relationships between these documents are also explored

  18. Rate Change Big Bang Theory

    Science.gov (United States)

    Strickland, Ken

    2013-04-01

    The Rate Change Big Bang Theory redefines the birth of the universe with a dramatic shift in energy direction and a new vision of the first moments. With rate change graph technology (RCGT) we can look back 13.7 billion years and experience every step of the big bang through geometrical intersection technology. The analysis of the Big Bang includes a visualization of the first objects, their properties, the astounding event that created space and time as well as a solution to the mystery of anti-matter.

  19. [Awareness rate, treatment rate and control rate of dyslipidemia in Chinese adults, 2010].

    Science.gov (United States)

    Li, Jian-hong; Wang, Li-min; Mi, Sheng-quan; Zhang, Mei; Li, Yi-chong; Jiang, Yong; Xu, Yu; Dai, Meng; Wang, Lin-hong

    2012-08-01

    To explore the awareness, treatment and control rates of dyslipidemia among Chinese adults aged over 18 in 2010, and to analyze the prevalent features. 97 409 subjects aged over 18 were recruited from 162 monitoring sites around 31 provinces in China mainland in 2010, applying multi-stage stratified cluster random sampling method. Information about subjects' history of dyslipidemia, treatment and control were collected by face-to-face interview; and each subject's fasting venous blood was drawn in the morning before having food, to test total cholesterol (TC), triglyceride (TG), high density lipoprotein-cholesterol (HDL-C) and low density lipoprotein-cholesterol (LDL-C). In total, 51 818 cases of dyslipidemia ever or now, including 2235 subjects who once suffered from dyslipidemia but had their blood lipid controlled to normal, were screened out. And the awareness, treatment and control rates were calculated by complex weighting. The awareness rate of dyslipidemia among Chinese adults was 10.93%, while the stratified rates were 6.00%, 16.75% and 18.74% in the groups of subjects aged 18 - 44, 45 - 59 and over 60 years old, respectively (χ² = 1293.02, P China, respectively (χ² = 117.04, P China, respectively (χ² = 50.71, P control rate of dyslipidemia was 3.53% among total subjects, while whose stratified rates were 1.64%, 5.49% and 6.94% in the groups of subjects aged 18 - 44, 45 - 59 and over 60 years old, respectively (χ² = 554.12, P China, respectively (χ² = 91.45, P control rates of dyslipidemia have been comparatively low among Chinese adults, especially among the population who were young, or who were from rural area or western China.

  20. 76 FR 46603 - Security Ratings

    Science.gov (United States)

    2011-08-03

    ... settled derivative securities). See Simplification of Registration of Reporting Requirements for Foreign... SECURITIES AND EXCHANGE COMMISSION 17 CFR Parts 200, 229, 230, 232, 239, 240, and 249 [Release No. 33-9245; 34-64975; File No. S7-18-08] RIN 3235-AK18 Security Ratings AGENCY: Securities and Exchange...

  1. SPECTRAL ANALYSIS OF EXCHANGE RATES

    Directory of Open Access Journals (Sweden)

    ALEŠA LOTRIČ DOLINAR

    2013-06-01

    Full Text Available Using spectral analysis is very common in technical areas but rather unusual in economics and finance, where ARIMA and GARCH modeling are much more in use. To show that spectral analysis can be useful in determining hidden periodic components for high-frequency finance data as well, we use the example of foreign exchange rates

  2. True mean rate measuring system

    International Nuclear Information System (INIS)

    Eichenlaub, D.P.

    1980-01-01

    A digital radiation-monitoring system for nuclear power plants uses digital and microprocessor circuitry to enable rapid processing of pulse information from remote radiation monitors. The pulse rates are analyzed to determine whether new pulse-rate information is statisticaly the same as that previously received and to determine the best possible averaging time, which can be changed so that the statistical error remains below a specified level while the system response time remains short. Several data modules each process the pulse-rate information from several remote radiation monitors. Each data module accepts pulse data from each radiation monitor and measures the true average or mean pulse rate of events occurring with a Poisson distribution to determine the radiation level. They then develop digital output signals which indciate the respective radiation levels and which can be transmitted via multiplexer circuits for additional processing and display. The data modules can accept signals from remote control stations or computer stations via the multiplexer circuit to change operating thresholds and alarm levels in their memories. A check module scans the various data modules to determine whether the output signals are valid. It also acts as a redundant data module and will automatically replace an inoperative unit. (DN)

  3. Speed control variable rate irrigation

    Science.gov (United States)

    Speed control variable rate irrigation (VRI) is used to address within field variability by controlling a moving sprinkler’s travel speed to vary the application depth. Changes in speed are commonly practiced over areas that slope, pond or where soil texture is predominantly different. Dynamic presc...

  4. Cohort Default Rates in Context

    Science.gov (United States)

    Looney, Shannon M.

    2011-01-01

    Burgeoning student loan debt indicates problems not only for the country's borrowers but also for the postsecondary system. The rise in student loan defaults signifies a rise in institutional cohort default rates (CDRs)--a measure of accountability that informs the government and the general public how well an institution prepares its students for…

  5. Diffusion rates for elevated releases

    International Nuclear Information System (INIS)

    Ramsdell, J.V.

    1983-11-01

    A search of the literature related to diffusion from elevated sources has determined that an adequate data base exists for use in developing parameterizations for estimating diffusion rates for material released from free standing stacks at nuclear power plants. A review of published data analyses indicates that a new parameterization of horizontal diffusion rates specifically for elevated releases is not likely to significantly change the magnitudes of horizontal diffusion coefficients on the average. However, the uncertainties associated with horizontal diffusion coefficient estimates under any given set of atmospheric conditions could be reduced by a new parameterization. Similarly, a new parameterization of vertical diffusion rates would be unlikely to significantly alter the magnitudes of diffusion coefficients for unstable atmospheric conditons. However, for neutral and stable atmospheric conditions, a new parameterization of vertical diffusion rates might increase vertical diffusion coefficients significantly. The increase would move ground-level time-integrated concentration maxima closer to the plant and would increase the maxima. 55 references, 2 figures, 4 tables

  6. Intuitive Understanding of Base Rates

    DEFF Research Database (Denmark)

    Austin, Laurel

    Purpose: This study examines whether physicians and other adults intuitively understand that the probability a positive test result is a true positive (positive predictive value, PPV) depends on the base rate of disease in the population tested. In particular, this research seeks to examine perce...

  7. Publication rates following pancreas meetings.

    Science.gov (United States)

    Timmer, A; Blum, T; Lankisch, P G

    2001-08-01

    Publication rates and determinants of publication were studied based on abstracts presented at pancreatic meetings. All abstracts presented at the 1994 and 1995 annual meetings of the European Pancreatic Club (EPC) and the American Pancreatic Association (APA) were followed up by searching MEDLINE. Publication rates were compared using log-rank tests and multiple logistic regression. The prestige of the publishing journals was compared using Kruskal-Wallis tests on scientific impact factors (SIF). Overall, 340 abstracts were presented at the EPC, and 254 were presented at the APA. Of these, 203 (59.7%, EPC) and 138 (54.3%, APA) were later published in peer-reviewed journals. Publication rates did not differ by study type or country region of origin. In addition, median SIFs were similar by conference (APA vs. EPC) and research type (basic science vs. clinical studies) (overall, 1.7). However, North American and North/West European articles were published in higher impact journals as compared with those from other countries. Publication rates and median journal SIFs in pancreas research are similar to those reported from other medical specialty meetings. There is no difference by conference, type of research, or origin (North American vs. European).

  8. Speculation, Hedging, and Interest Rates

    DEFF Research Database (Denmark)

    Buraschi, Andrea; Whelan, Paul

    of Treasury bond markets that the singleagent paradigm finds difficult to reconcile. Empirically, we test predictions from themodel using a large dataset on beliefs about fundamentals and find that: (i) shocksto disagreement lower short term interest rates; (ii) raise the slope of the yield curve;and (iii...

  9. Forecasting Interest Rates and Inflation

    DEFF Research Database (Denmark)

    Chun, Albert Lee

    the best overall for short horizon forecasts of short to medium term yields and inflation. Econometric models with shrinkage perform the best over longer horizons and maturities. Aggregating over a larger set of analysts improves inflation surveys while generally degrading interest rates surveys. We...

  10. Frame Rate and Human Vision

    Science.gov (United States)

    Watson, Andrew B.

    2012-01-01

    To enhance the quality of the theatre experience, the film industry is interested in achieving higher frame rates for capture and display. In this talk I will describe the basic spatio-temporal sensitivities of human vision, and how they respond to the time sequence of static images that is fundamental to cinematic presentation.

  11. 78 FR 15973 - Fee Rate

    Science.gov (United States)

    2013-03-13

    ... DEPARTMENT OF THE INTERIOR National Indian Gaming Commission Fee Rate Correction In notice document 2013-05334, appearing on page 14821 in the issue of Thursday, March 7, 2013, make the following correction: On page 14821, in the second column, in the eighth line from the bottom of the page, ``Dated...

  12. The dose-rate effect

    International Nuclear Information System (INIS)

    Steel, G.G.

    1989-01-01

    This paper presents calculations that illustrate two conclusions; for any particular cell type there will be a critical radius at which tumor control breaks down, and the radius at which this occurs is strongly dependent upon the low-dose-rate radiosensitivity of the cells

  13. European rating of drug harms

    NARCIS (Netherlands)

    van Amsterdam, Jan; Nutt, David; Phillips, Lawrence; van den Brink, Wim

    2015-01-01

    The present paper describes the results of a rating study performed by a group of European Union (EU) drug experts using the multi-criteria decision analysis model for evaluating drug harms. Forty drug experts from throughout the EU scored 20 drugs on 16 harm criteria. The expert group also assessed

  14. Rate meter design and construction

    International Nuclear Information System (INIS)

    Peon Aguirre, R.; Fonseca Araujo, W.H.

    1989-01-01

    An electric diagram is proposed to build a geiger detector Rate Meter, to count gamma radiation and X ray. This idea was made up with the prototype construction which has a five scales analogue display (100, 300, 1000, 3000 and 10000 c/s). (Author)

  15. Antipredator defenses predict diversification rates

    Science.gov (United States)

    Arbuckle, Kevin; Speed, Michael P.

    2015-01-01

    The “escape-and-radiate” hypothesis predicts that antipredator defenses facilitate adaptive radiations by enabling escape from constraints of predation, diversified habitat use, and subsequently speciation. Animals have evolved diverse strategies to reduce the direct costs of predation, including cryptic coloration and behavior, chemical defenses, mimicry, and advertisement of unprofitability (conspicuous warning coloration). Whereas the survival consequences of these alternative defenses for individuals are well-studied, little attention has been given to the macroevolutionary consequences of alternative forms of defense. Here we show, using amphibians as the first, to our knowledge, large-scale empirical test in animals, that there are important macroevolutionary consequences of alternative defenses. However, the escape-and-radiate hypothesis does not adequately describe them, due to its exclusive focus on speciation. We examined how rates of speciation and extinction vary across defensive traits throughout amphibians. Lineages that use chemical defenses show higher rates of speciation as predicted by escape-and-radiate but also show higher rates of extinction compared with those without chemical defense. The effect of chemical defense is a net reduction in diversification compared with lineages without chemical defense. In contrast, acquisition of conspicuous coloration (often used as warning signals or in mimicry) is associated with heightened speciation rates but unchanged extinction rates. We conclude that predictions based on the escape-and-radiate hypothesis must incorporate the effect of traits on both speciation and extinction, which is rarely considered in such studies. Our results also suggest that knowledge of defensive traits could have a bearing on the predictability of extinction, perhaps especially important in globally threatened taxa such as amphibians. PMID:26483488

  16. The influence of interest rates on the exchange rate and exchange rate volatility

    OpenAIRE

    Florin MAVRIS; Dumitru-Cristian OANEA

    2014-01-01

    The dynamic of interest rates has been the subject of attention by both traders and researchers. We see in what manner different factors that depend on the actions of central banks that influence them by using a GARCH type model and we compare its performance with other models to see what approach explains and predicts the movement of the exchange rate. To better understand the type of model that is applicable the data is tested for heteroskedasticity, and only after that the model is impleme...

  17. Content and ratings of teen-rated video games.

    Science.gov (United States)

    Haninger, Kevin; Thompson, Kimberly M

    2004-02-18

    Children's exposure to violence, blood, sexual themes, profanity, substances, and gambling in the media remains a source of public health concern. However, content in video games played by older children and adolescents has not been quantified or compared with the rating information provided to consumers by the Entertainment Software Rating Board (ESRB). To quantify and characterize the content in video games rated T (for "Teen") and to measure the agreement between the content observed in game play and the ESRB-assigned content descriptors displayed on the game box. We created a database of all 396 T-rated video game titles released on the major video game consoles in the United States by April 1, 2001, to identify the distribution of games by genre and to characterize the distribution of ESRB-assigned content descriptors. We randomly sampled 80 video game titles (which included 81 games because 1 title included 2 separate games), played each game for at least 1 hour, quantitatively assessed the content, and compared the content we observed with the content descriptors assigned by the ESRB. Depictions of violence, blood, sexual themes, gambling, and alcohol, tobacco, or other drugs; whether injuring or killing characters is rewarded or is required to advance in the game; characterization of gender associated with sexual themes; and use of profanity in dialogue, lyrics, or gestures. Analysis of all content descriptors assigned to the 396 T-rated video game titles showed 373 (94%) received content descriptors for violence, 102 (26%) for blood, 60 (15%) for sexual themes, 57 (14%) for profanity, 26 (7%) for comic mischief, 6 (2%) for substances, and none for gambling. In the random sample of 81 games we played, we found that 79 (98%) involved intentional violence for an average of 36% of game play, 73 (90%) rewarded or required the player to injure characters, 56 (69%) rewarded or required the player to kill, 34 (42%) depicted blood, 22 (27%) depicted sexual themes

  18. Optimal Discount Rates for Government Projects

    OpenAIRE

    Park, Sangkyun

    2012-01-01

    Project selection based on the net present value can be optimal only if the discount rate is optimal. The optimal discount rate for a government project can be a risk-free rate, a comparable market rate (market interest rate corresponding to the risk of cash flows to the government), or an adjusted market rate, depending on circumstances. This paper clarifies the conditions for each case. Provided that the optimal discount rate is the comparable market rate, it varies across intervention meth...

  19. Financial markets and interest rate

    Directory of Open Access Journals (Sweden)

    Dudić Zdenka

    2012-01-01

    Full Text Available The paper 'Financial Markets and Interest Rate' originated from the thesis paper. This topic is very interesting and more and more present in the recent few years. Various changes in the market, increased competition, the development of information technologies, application of innovations, all these contribute to the rapid expansion of scope and use of financial derivatives. Therefore, under these influences, oscillations in various markets are present on a daily basis, so that the vast expansion of financial contracts is present, which is mainly related to interest rates. What are the world's best-known stock markets? What are the instruments most actively traded on stock exchanges? The words LIBOR and BBA LIBOR are frequently heard in today's media. What is LIBOR? What is BBA LIBOR? How and when is it determined? Where is LIBOR used?.

  20. What Determines Star Formation Rates?

    Science.gov (United States)

    Evans, Neal John

    2017-06-01

    The relations between star formation and gas have received renewed attention. We combine studies on scales ranging from local (within 0.5 kpc) to distant galaxies to assess what factors contribute to star formation. These include studies of star forming regions in the Milky Way, the LMC, nearby galaxies with spatially resolved star formation, and integrated galaxy studies. We test whether total molecular gas or dense gas provides the best predictor of star formation rate. The star formation ``efficiency," defined as star formation rate divided by mass, spreads over a large range when the mass refers to molecular gas; the standard deviation of the log of the efficiency decreases by a factor of three when the mass of relatively dense molecular gas is used rather than the mass of all the molecular gas. We suggest ways to further develop the concept of "dense gas" to incorporate other factors, such as turbulence.

  1. The instantaneous frequency rate spectrogram

    Science.gov (United States)

    Czarnecki, Krzysztof

    2016-01-01

    An accelerogram of the instantaneous phase of signal components referred to as an instantaneous frequency rate spectrogram (IFRS) is presented as a joint time-frequency distribution. The distribution is directly obtained by processing the short-time Fourier transform (STFT) locally. A novel approach to amplitude demodulation based upon the reassignment method is introduced as a useful by-product. Additionally, an estimator of energy density versus the instantaneous frequency rate (IFR) is proposed and referred to as the IFR profile. The energy density is estimated based upon both the classical energy spectrogram and the IFRS smoothened by the median filter. Moreover, the impact of an analyzing window width, additive white Gaussian noise and observation time is tested. Finally, the introduced method is used for the analysis of the acoustic emission of an automotive engine. The recording of the engine of a Lamborghini Gallardo is analyzed as an example.

  2. 13 CFR 301.4 - Investment rates.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Investment rates. 301.4 Section... ELIGIBILITY, INVESTMENT RATE AND PROPOSAL AND APPLICATION REQUIREMENTS Investment Rates and Matching Share Requirements § 301.4 Investment rates. (a) Minimum Investment Rate. There is no minimum Investment Rate for a...

  3. Injury rates in Shotokan karate

    OpenAIRE

    Critchley, G. R.; Mannion, S.; Meredith, C.

    1999-01-01

    OBJECTIVE: To document the injury rate in three British Shotokan karate championships in consecutive years. In these tournaments strict rules governed contact, with only "light" or "touch" contact allowed. Protective padding for the head, hands, or feet was prohibited. METHODS: Prospective recording of injuries resulting from 1770 bouts in three national competitions of 1996, 1997, and 1998. Details of ages and years of karate experience were also obtained. RESULTS: 160 injuries were su...

  4. Exchange Rate and Inflation Dynamics

    OpenAIRE

    Eatzaz Ahmad; Saima Ahmed Ali

    1999-01-01

    This paper studies simultaneous determination of nominal exchange rate and domestic price level in Pakistan. The estimated model contains sufficient built-in dynamics to trace the pattern and speed of adjustment in the two variables in response to temporary or permanent shocks. The two domestic shocks considered in the paper are monetary and real shocks, while the three external shocks considered are import price, export price and foreign exchange reserves shocks. The study finds that the imp...

  5. Gig economy, rating, labour relationship

    OpenAIRE

    Gemma Pacella

    2017-01-01

    In the era of gig economy, the job performance is now influenced by the customer rating system. A new London’s Employment Tribunal judgment approaches the Uber London issue focusing also on customer feedback. Since drivers are qualified as workers, not self-employed, as the English Court ruled on, this article tooks a position about on-line feedback incidence on job relationship. Referring to customer’s opinion, the employer exercises control on services performed by each worker, whereas Ital...

  6. Extended Power Up-rates

    International Nuclear Information System (INIS)

    Jon Ball

    2006-01-01

    Full text of publication follows: Nuclear energy is a reliable and cost-competitive global source of power. With rising oil and gas prices, nuclear continues to provide economic and environmental benefits. Extended Power Up-rate (EPU) provides a means for existing nuclear assets to generate increased power and substantially reduce electrical generation costs. GE Energy's Nuclear Business is the global leader in boiling water reactor (BWR) technology. The experience-base of plants that have successfully achieved EPU includes Spain, Switzerland, Sweden, Germany and the United States. The GE experience-base includes fourteen BWRs with over fifty-eight reactor-years of operating experience at EPU conditions. Other than the expected plant modifications needed to accommodate higher steam flows, flow-induced vibration (FIV) has been identified as the major area of concern when up-rating. Two plants have experienced damage to their steam dryers that has lead to an extensive program to improve the understanding of the effects of up-rates. This program includes extensive in-plant data collection, the development of a scale model test facility to study components susceptible to FIV and improvements in analytical techniques for evaluating loading on reactor internals. As global energy demands increase, oil and gas prices escalate, and environmental concerns over greenhouse effects challenge us to find environmentally friendly sources of energy, Nuclear is the most viable and economical source of power in the world. With a focused effort on plant reliability, existing plants can undergo Extended Power Up-rate, and continue to meet the ever-increasing energy demands in the world. (author)

  7. Rates for the competitive market

    International Nuclear Information System (INIS)

    Ander, B.; Watson, I.; Snelson, K.

    1997-01-01

    The discussion panel consisted of Bruce Ander of Pamco Atlas, Ian Watson, Chair of the Ontario Chamber of Commerce Energy Committee, and Ken Snelson, Principal of Snelson International Energy. Ian Watson shared his membership's views on the future supply of electric power under a competitive energy system in Ontario, stressing the need for the government to instruct Ontario Hydro to bring forward a transmission rate to the Ontario Energy Board in 1997, and for legislation to allow independent buyers and sellers to contract with one another to use that transmission rate outside the control of Ontario Hydro. He also expressed concern about Ontario Hydro's anti-competitive load retention rate which was an obvious bid to retain its major customers. Ken Snelson reported on a review of the effects of competition on Canada's long-term energy outlook. He predicted that in a competitive market with full retail access, customers can expect a lot more choice; independent producers also will have many more options for selling power

  8. Status of rates and rate equations for thermal leptogenesis

    Science.gov (United States)

    Biondini, S.; Bödeker, D.; Brambilla, N.; Garny, M.; Ghiglieri, J.; Hohenegger, A.; Laine, M.; Mendizabal, S.; Millington, P.; Salvio, A.; Vairo, A.

    2018-02-01

    In many realizations of leptogenesis, heavy right-handed neutrinos play the main role in the generation of an imbalance between matter and antimatter in the early Universe. Hence, it is relevant to address quantitatively their dynamics in a hot and dense environment by taking into account the various thermal aspects of the problem at hand. The strong washout regime offers an interesting framework to carry out calculations systematically and reduce theoretical uncertainties. Indeed, any matter-antimatter asymmetry generated when the temperature of the hot plasma T exceeds the right-handed neutrino mass scale M is efficiently erased, and one can focus on the temperature window T ≪ M. We review recent progress in the thermal field theoretic derivation of the key ingredients for the leptogenesis mechanism: the right-handed neutrino production rate, the CP asymmetry in the heavy-neutrino decays and the washout rates. The derivation of evolution equations for the heavy-neutrino and lepton-asymmetry number densities, their rigorous formulation and applicability are also discussed.

  9. Response rate and reinforcement rate in Pavlovian conditioning.

    Science.gov (United States)

    Harris, Justin A; Carpenter, Joanne S

    2011-10-01

    Four experiments used delay conditioning of magazine approach in rats to investigate the relationship between the rate of responding, R, to a conditioned stimulus (CS) and the rate, r, at which the CS is reinforced with the unconditioned stimulus (US). Rats were concurrently trained with four variable-duration CSs with different rs, either as a result of differences in the mean CS-US interval or in the proportion of CS presentations that ended with the US. In each case, R was systematically related to r, and the relationship was very accurately characterized by a hyperbolic function, R = Ar/(r +c). Accordingly, the reciprocal of these two variables-response interval, I (= 1/R), and CS-US interval, i (= 1/r) - were related by a simple affine (straight line) transformation, I = mi+b. This latter relationship shows that each increment in the time that the rats had to wait for food produced a linear increment in the time they waited between magazine entries. We discuss the close agreement between our findings and the Matching Law (Herrnstein, 1970) and consider their implications for both associative theories (e.g., Rescorla & Wagner, 1972) and nonassociative theories (Gallistel & Gibbon, 2000) of conditioning. (PsycINFO Database Record (c) 2011 APA, all rights reserved).

  10. Heart rate variability in newborns.

    Science.gov (United States)

    Javorka, K; Lehotska, Z; Kozar, M; Uhrikova, Z; Kolarovszki, B; Javorka, M; Zibolen, M

    2017-09-22

    Heart rate (HR) and heart rate variability (HRV) in newborns is influenced by genetic determinants, gestational and postnatal age, and other variables. Premature infants have a reduced HRV. In neonatal HRV evaluated by spectral analysis, a dominant activity can be found in low frequency (LF) band (combined parasympathetic and sympathetic component). During the first postnatal days the activity in the high frequency (HF) band (parasympathetic component) rises, together with an increase in LF band and total HRV. Hypotrophy in newborn can cause less mature autonomic cardiac control with a higher contribution of sympathetic activity to HRV as demonstrated by sequence plot analysis. During quiet sleep (QS) in newborns HF oscillations increase - a phenomenon less expressed or missing in premature infants. In active sleep (AS), HRV is enhanced in contrast to reduced activity in HF band due to the rise of spectral activity in LF band. Comparison of the HR and HRV in newborns born by physiological vaginal delivery, without (VD) and with epidural anesthesia (EDA) and via sectio cesarea (SC) showed no significant differences in HR and in HRV time domain parameters. Analysis in the frequency domain revealed, that the lowest sympathetic activity in chronotropic cardiac chronotropic regulation is in the VD group. Different neonatal pathological states can be associated with a reduction of HRV and an improvement in the health conditions is followed by changes in HRV what can be use as a possible prognostic marker. Examination of heart rate variability in neonatology can provide information on the maturity of the cardiac chronotropic regulation in early postnatal life, on postnatal adaptation and in pathological conditions about the potential dysregulation of cardiac function in newborns, especially in preterm infants.

  11. Global warming and interest rate

    International Nuclear Information System (INIS)

    Rey, Francisco C.

    1999-01-01

    The socio-economical growth of our country will yield unavoidably a sustained growth on the energy demand, particularly on the electricity demand. If the expected assumptions are fulfilled, the needed power needed to cover the electrical demand between 1997 and 2020 will almost triple, and the natural gas consumption by the generating facilities and CO 2 emissions in that sector will multiply by five. If the emissions of other sector grow at the same rate as those of the electric sector the level of the emissions in our country will be equivalent to those of the developed countries at present. It is imperative to put limits to the growth of those emissions. In order to avoid that limiting of the emissions to be just a declaration, it is necessary to find and implement mechanisms that will lead to that goal. In the electric sector, and in order to promote the use of energy sources free of those emissions, the possible measures are: Application of an emission tax of U$ 10 (or higher) per ton of CO 2 and use of the resulting funds to cause a decrease in the interest rate applied to electric generation projects which do not emit greenhouse gases. Contributions by the countries responsible for the present level of CO 2 in the atmosphere to lower the incidence of the initial capital costs on the generation costs for the same type of projects (via low rate loans or subsidies). Being active any one of these two mechanisms (or both), will provoke those clean generation sources to compete successfully and will allow them to be a valuable tool to effectively diminish the growth of the emissions of those gases from the electric sector. Besides, a tax of such magnitude would not provoke an important increase on the electric energy prices. If any mechanism is implemented which intends to effectively diminish the CO 2 emissions, the first important project to be completed is the completion of the Atucha II power station. (author)

  12. Atmospheric radiation flight dose rates

    Science.gov (United States)

    Tobiska, W. K.

    2015-12-01

    Space weather's effects upon the near-Earth environment are due to dynamic changes in the energy transfer processes from the Sun's photons, particles, and fields. Of the domains that are affected by space weather, the coupling between the solar and galactic high-energy particles, the magnetosphere, and atmospheric regions can significantly affect humans and our technology as a result of radiation exposure. Space Environment Technologies (SET) has been conducting space weather observations of the atmospheric radiation environment at aviation altitudes that will eventually be transitioned into air traffic management operations. The Automated Radiation Measurements for Aerospace Safety (ARMAS) system and Upper-atmospheric Space and Earth Weather eXperiment (USEWX) both are providing dose rate measurements. Both activities are under the ARMAS goal of providing the "weather" of the radiation environment to improve aircraft crew and passenger safety. Over 5-dozen ARMAS and USEWX flights have successfully demonstrated the operation of a micro dosimeter on commercial aviation altitude aircraft that captures the real-time radiation environment resulting from Galactic Cosmic Rays and Solar Energetic Particles. The real-time radiation exposure is computed as an effective dose rate (body-averaged over the radiative-sensitive organs and tissues in units of microsieverts per hour); total ionizing dose is captured on the aircraft, downlinked in real-time, processed on the ground into effective dose rates, compared with NASA's Langley Research Center (LaRC) most recent Nowcast of Atmospheric Ionizing Radiation System (NAIRAS) global radiation climatology model runs, and then made available to end users via the web and smart phone apps. Flight altitudes now exceed 60,000 ft. and extend above commercial aviation altitudes into the stratosphere. In this presentation we describe recent ARMAS and USEWX results.

  13. Dose and dose rate monitor

    International Nuclear Information System (INIS)

    Novakova, O.; Ryba, J.; Slezak, V.; Svobodova, B.; Viererbl, L.

    1984-10-01

    The methods are discussea of measuring dose rate or dose using a scintillation counte. A plastic scintillator based on polystyrene with PBD and POPOP activators and coated with ZnS(Ag) was chosen for the projected monitor. The scintillators were cylindrical and spherical in shape and of different sizes; black polypropylene tubes were chosen as the best case for the probs. For the counter with different plastic scintillators, the statistical error 2σ for natural background was determined. For determining the suitable thickness of the ZnS(Ag) layer the energy dependence of the counter was measured. Radioisotopes 137 Cs, 241 Am and 109 Cd were chosen as radiation sources. The best suited ZnS(Ag) thickness was found to be 0.5 μm. Experiments were carried out to determine the directional dependence of the detector response and the signal to noise ratio. The temperature dependence of the detector response and its compensation were studied, as were the time stability and fatigue manifestations of the photomultiplier. The design of a laboratory prototype of a dose rate and dose monitor is described. Block diagrams are given of the various functional parts of the instrument. The designed instrument is easiiy portable, battery powered, measures dose rates from natural background in the range of five orders, i.e., 10 -2 to 10 3 nGy/s, and allows to determine a dose of up to 10 mGy. Accouracy of measurement in the energy range of 50 keV to 1 MeV is better than +-20%. (E.S.)

  14. NPP ATMS Snowfall Rate Product

    Science.gov (United States)

    Meng, Huan; Ferraro, Ralph; Kongoli, Cezar; Wang, Nai-Yu; Dong, Jun; Zavodsky, Bradley; Yan, Banghua

    2015-01-01

    Passive microwave measurements at certain high frequencies are sensitive to the scattering effect of snow particles and can be utilized to retrieve snowfall properties. Some of the microwave sensors with snowfall sensitive channels are Advanced Microwave Sounding Unit (AMSU), Microwave Humidity Sounder (MHS) and Advance Technology Microwave Sounder (ATMS). ATMS is the follow-on sensor to AMSU and MHS. Currently, an AMSU and MHS based land snowfall rate (SFR) product is running operationally at NOAA/NESDIS. Based on the AMSU/MHS SFR, an ATMS SFR algorithm has been developed recently. The algorithm performs retrieval in three steps: snowfall detection, retrieval of cloud properties, and estimation of snow particle terminal velocity and snowfall rate. The snowfall detection component utilizes principal component analysis and a logistic regression model. The model employs a combination of temperature and water vapor sounding channels to detect the scattering signal from falling snow and derive the probability of snowfall (Kongoli et al., 2015). In addition, a set of NWP model based filters is also employed to improve the accuracy of snowfall detection. Cloud properties are retrieved using an inversion method with an iteration algorithm and a two-stream radiative transfer model (Yan et al., 2008). A method developed by Heymsfield and Westbrook (2010) is adopted to calculate snow particle terminal velocity. Finally, snowfall rate is computed by numerically solving a complex integral. NCEP CMORPH analysis has shown that integration of ATMS SFR has improved the performance of CMORPH-Snow. The ATMS SFR product is also being assessed at several NWS Weather Forecast Offices for its usefulness in weather forecast.

  15. Reaction rates for neutrino processes

    International Nuclear Information System (INIS)

    Shalitin, D.

    1978-01-01

    Some integrals involved in neutrino processes are evaluated by transformation to a special system of reference - usually to the center of mass system (CM). Rather simple analytic expressions are obtained for reaction rates and, though less simple, for moments. An interesting result thus obtained is for an isotropic interaction (in CM) of a neutrino with a monoenergetic isotropic gas of extreme relativistic electrons: it is found that the probability of the scattered neutrino to have energy in a certain range is independent of this energy. (Auth.)

  16. Charge balancing fill rate monitor

    International Nuclear Information System (INIS)

    Rothman, J.L.; Blum, E.B.

    1995-01-01

    A fill rate monitor has been developed for the NSLS storage rings to allow machine tuning over a very large dynamic range of beam current. Synchrotron light, focused on a photodiode, produces a signal proportional to the beam current. A charge balancing circuit processes the diode current, creating an output signal proportional to the current injected into the ring. The unit operates linearly over a dynamic range of 120 dB and can resolve pulses of injected beam as small as 1 μA

  17. CHANGES IN EXCHANGE RATE REGIMES

    Directory of Open Access Journals (Sweden)

    Carmen SANDU (TODERASCU

    2014-06-01

    Full Text Available The experience of recentyears showsthat it hasa fundamentalroleformation mechanismof the exchange rateinmacroeconomic stabilization. Global economiccrises, oil shockshave shownthe difficultyoffloatingsustainabilitybyparticipants in the system. EuropeanMonetary System, focused onconcertedfloatingcurrenciestoECU, was formedunder the conditionsin which somecountries have adoptedregional monetaryarrangements(EU countries, with suchbasescurrencyregimeshybridthat combinesspecific mechanismsto those offixedratefree floating. This paperaims to demonstratethe important role thatithasthe choice ofexchange rateregimeas abasic elementin thefoundationofmacroeconomic stabilizationinstruments. Consideredan expression of thestateof the domestic economyandinternationalcompetitiveness, the exchange rate is determined bya complex set ofexternal factorsorinternalstabilityisa prerequisite forthe crisis.

  18. Rating prediction using textual reviews

    Science.gov (United States)

    NithyaKalyani, A.; Ushasukhanya, S.; Nagamalleswari, TYJ; Girija, S.

    2018-04-01

    Information today is present in the form of opinions. Two & a half quintillion bytes are exchanged today in Internet everyday and a large amount consists of people’s speculation and reflection over an issue. It is the need of the hour to be able to mine this information that is presented to us. Sentimental analysis refers to mining of this raw information to make sense. The discipline of opinion mining has seen a lot of encouragement in the past few years augmented by involvement of social media like Instagram, Facebook, and twitter. The hidden message in this web of information is useful in several fields such as marketing, political polls, product review, forecast market movement, Identifying detractor and promoter. In this endeavor, we introduced sentiment rating system for a particular text or paragraph to determine the opinions polarity. Firstly we resolve the searching problem, tokenization, classification, and reliable content identification. Secondly we extract probability for given text or paragraph for both positive & negative sentiment value using naive bayes classifier. At last we use sentiment dictionary (SD), sentiment degree dictionary (SDD) and negation dictionary (ND) for more accuracy. Later we blend all above mentioned factor into given formula to find the rating for the review.

  19. Sedimentation rate in Ariake Sea

    International Nuclear Information System (INIS)

    Momoshima, Noriyuki; Nishio, Souma; Honza, Eiichi

    2004-01-01

    rate by 210 Pb(22 y) and 137 Cs(30 y). The depth profiles of the Sta.2 which is about 10 km away form the mouth of the Chikugo river showed almost constant 210 Pb concentration at upper several cm and subsequent decrease in concentration in deeper layers down to 24 cm. The sedimentation rate of 0.11 g/cm 2 /y was obtained by the decline of excess 210 Pb, yielding 0.24 cm/y sedimentation rate at the sediment surface. Another core at Sta. 4 which is south west of the Sta. 2 showed very slow sedimentation rate. The 137 Cs supplied by atmospheric nuclear tests was detected down to 34 cm at Sta. 2, the year calculated for 34 cm depth using the 210 Pb sedimentation rate was older than 1954 for the initiation of 137 Cs contamination by nuclear tests. The 137 Cs profile at Sta. 4 showed very slow sedimentation rate as observed for 210 Pb, suggesting necessity of thinner sectioning the core. There are several rivers are flowing into the Ariake sea and the Chikugo river is one of the major rivers. The Sta. 2 would be affected mostly by the Chikugo river and thus would record historical change of the environmental condition related to the Chikugo river. Anti-clockwise current is flowing in inner area of the Ariake sea, which would bring suspended materials supplied from the Chikugo river to the west of the Ariake sea. Larger materials would be accumulated at closer area to the mouth of the Chikugo river and less would be transported to the West. The slower accumulation rate at Sta. 4 than Sta. 2 is reasonable considering the situation mentioned above. The model calculation on 137 Cs and 210 Pb distribution for Sta. 2 suggests that assumption of a constant mixing at upper layers for 210 Pb and 137 Cs gives inconsistency with the observed distribution, 137 Cs was observed at deeper depth that estimated from 210 Pb sedimentation rate. The inventory of 137 Cs at Sta. 2 decay corrected to 2003 was 17.8% of total deposition at ground surface and 2.8% at Sta. 4, this would be related to

  20. Bypass flow rate control method

    International Nuclear Information System (INIS)

    Kiyama, Yoichi.

    1997-01-01

    In a PWR type reactor, bypass flow rate is controlled by exchanging existent jetting hole plugs of a plurality of nozzles disposed to the upper end of incore structures in order to flow a portion of primary coolants as a bypass flow to the upper portion of the pressure vessel. Two kinds of exchange plugs, namely, a first plug and a second plug each having a jetting out hole of different diameter are used as exchange plugs. The first plug has the diameter as that of an existent plug and the second plug has a jetting out hole having larger diameter than that of the existent plug. Remained extent plugs are exchanged to a combination of the first and the second plugs without exchanging existent plugs having seizing with the nozzles, in which the number and the diameter of the jetting out holes of the second plugs are previously determined based on predetermined total bypass flow rate to be jetted from the entire plugs after exchange of plugs. (N.H.)

  1. Gig economy, rating, labour relationship

    Directory of Open Access Journals (Sweden)

    Gemma Pacella

    2017-04-01

    Full Text Available In the era of gig economy, the job performance is now influenced by the customer rating system. A new London’s Employment Tribunal judgment approaches the Uber London issue focusing also on customer feedback. Since drivers are qualified as workers, not self-employed, as the English Court ruled on, this article tooks a position about on-line feedback incidence on job relationship. Referring to customer’s opinion, the employer exercises control on services performed by each worker, whereas Italian Legal System bounds it, within the meaning of article 4 of Worker’s Statutory. On the other hand, the customer rating can be considered as a type of control on the business organization, in observance of limits established by the same article.Moreover, the paper’s purpose is to inquire about the feedback positive impact on workers: customer satisfaction could provide business bonus, or it could become an evidence against employer in a court case.

  2. 47 CFR 65.800 - Rate base.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Rate base. 65.800 Section 65.800 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) INTERSTATE RATE OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Rate Base § 65.800 Rate base. The rate base shall...

  3. 78 FR 44459 - Rate Regulation Reforms

    Science.gov (United States)

    2013-07-24

    ... the interest rate. A simple multiplication of the nominal rate by the portion of the year covered by... makes technical changes to the full and simplified rate procedures; changes the interest rate that... allocation methodology for cross-over traffic. Part IV sets out the change in the interest rate carriers must...

  4. 27 CFR 70.93 - Interest rate.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Interest rate. 70.93... Excise and Special (Occupational) Tax Interest § 70.93 Interest rate. (a) In general. The interest rate... annual percentage rate of interest will exceed the prescribed rate of interest. (b) Applicability of...

  5. 76 FR 59767 - Interest Rates; Notice

    Science.gov (United States)

    2011-09-27

    ... SMALL BUSINESS ADMINISTRATION Interest Rates; Notice AGENCY: Small Business Administration. The Small Business Administration publishes an interest rate called the optional ``peg'' rate (13 CFR 120... fluctuating interest rate SBA loans. This rate will be 3.125 (3\\1/8\\) percent for the October-December quarter...

  6. 7 CFR 1779.33 - Interest rates.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Interest rates. 1779.33 Section 1779.33 Agriculture... (CONTINUED) WATER AND WASTE DISPOSAL PROGRAMS GUARANTEED LOANS § 1779.33 Interest rates. (a) General. Rates.... Interest rates will be those rates customarily charged borrowers in similar circumstances in the ordinary...

  7. 7 CFR 4279.125 - Interest rates.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Interest rates. 4279.125 Section 4279.125 Agriculture... Interest rates. The interest rate for the guaranteed loan will be negotiated between the lender and the applicant and may be either fixed or variable as long as it is a legal rate. Interest rates will not be more...

  8. 7 CFR 1980.320 - Interest rate.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Interest rate. 1980.320 Section 1980.320 Agriculture... REGULATIONS (CONTINUED) GENERAL Rural Housing Loans § 1980.320 Interest rate. The interest rate must not... interest rate over the life of the loan. The rate shall be agreed upon by the borrower and the Lender and...

  9. 7 CFR 3575.33 - Interest rates.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Interest rates. 3575.33 Section 3575.33 Agriculture... GENERAL Community Programs Guaranteed Loans § 3575.33 Interest rates. (a) General. Rates will be negotiated between the lender and the borrower. They may be either fixed or variable rates. Interest rates...

  10. 7 CFR 1714.4 - Interest rates.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Interest rates. 1714.4 Section 1714.4 Agriculture... PRE-LOAN POLICIES AND PROCEDURES FOR INSURED ELECTRIC LOANS General § 1714.4 Interest rates. (a) Municipal rate loans. Each advance of funds on a municipal rate loan shall bear interest at a single rate...

  11. Winning the rate base battle

    International Nuclear Information System (INIS)

    Steigelmann, W.H.

    1986-01-01

    In most states, all costs associated with building new power plants and other facilities are born by the owning utility until the facility becomes useful to customers. For a nuclear plant, this means that a utility must raise several billion dollars in capital over a period of 10 to 20 years, often undergrowing pressures to cancel the project. None of the possible ways of mitigating rate shock is free of controversy, but the objective should be to do that which is most equitable and has least adverse effects. The basic options are discussed, and all but one involves phasing in over time the full economic effects of the new plant. The impacts on average electricity price of three of the seven approaches are illustrated

  12. Radiation dose rate measuring device

    International Nuclear Information System (INIS)

    Sorber, R.

    1987-01-01

    A portable device is described for in-field usage for measuring the dose rate of an ambient beta radiation field, comprising: a housing, substantially impervious to beta radiation, defining an ionization chamber and having an opening into the ionization chamber; beta radiation pervious electrically-conductive window means covering the opening and entrapping, within the ionization chamber, a quantity of gaseous molecules adapted to ionize upon impact with beta radiation particles; electrode means disposed within the ionization chamber and having a generally shallow concave surface terminating in a generally annular rim disposed at a substantially close spacing to the window means. It is configured to substantially conform to the window means to define a known beta radiation sensitive volume generally between the window means and the concave surface of the electrode means. The concave surface is effective to substantially fully expose the beta radiation sensitive volume to the radiation field over substantially the full ambient area faced by the window means

  13. Systematic Differences and Random Rates

    DEFF Research Database (Denmark)

    Knudsen, Thorbjørn; Levinthal, Daniel A.; Winter, Sidney G.

    2017-01-01

    evolutionary dynamics of firm entry, and the subsequent consolidation of market share and industry shake-out is considered, then during early epochs of industry evolution, one would tend to observe systematic differences in growth rates associated with firm’s competitive fitness. Thus, it is only......A fundamental premise of the strategy field is the existence of persistent firm level differences in resources and capabilities. This property of heterogeneity should express itself in a variety of empirical “signatures,” such as firm performance and arguably systematic and persistent differences...... component, but for much of an industry’s and firm’s history should have a random pattern consistent with the Gibrat property. The intuition is as follows. In a Cournot equilibrium, firms of better “type” (i.e., lower cost) realize a larger market share, but act with some restraint on their choice...

  14. Flow, diffusion, and rate processes

    International Nuclear Information System (INIS)

    Sieniutycz, S.; Salamon, P.

    1992-01-01

    This volume contains recent results obtained for the nonequilibrium thermodynamics of transport and rate processes are reviewed. Kinetic equations, conservation laws, and transport coefficients are obtained for multicomponent mixtures. Thermodynamic principles are used in the design of experiments predicting heat and mass transport coefficients. Highly nonstationary conditions are analyzed in the context of transient heat transfer, nonlocal diffusion in stress fields and thermohydrodynamic oscillatory instabilities. Unification of the dynamics of chemical systems with other sorts of processes (e.g. mechanical) is given. Thermodynamics of reacting surfaces is developed. Admissible reaction paths are studied and a consistency of chemical kinetics with thermodynamics is shown. Oscillatory reactions are analyzed in a unifying approach showing explosive, conservation or damped behavior. A comprehensive review of transport processes in electrolytes and membranes is given. Applications of thermodynamics to thermoelectric systems and ionized gas (plasma) systems are reviewed

  15. Creep at very low rates

    CSIR Research Space (South Africa)

    Nabarro, FRN

    2002-02-01

    Full Text Available stream_source_info nabarro_2002.pdf.txt stream_content_type text/plain stream_size 31615 Content-Encoding ISO-8859-1 stream_name nabarro_2002.pdf.txt Content-Type text/plain; charset=ISO-8859-1 Creep at Very Low Rates F... to the necessary condition: vol. 29, p. 1285. 10. J.E. Harris, R.B. Jones, G.W. Greenwood, and M.J. Ward: J. Aust.L/b . m/2psp [5] Inst. Met., 1969, vol. 14, p. 154. 11. G.B. Gibbs: Mem. Sci. Rev. Met., 1965, vol. 62, p. 781.Even if this condition is satisfied, H...

  16. 19 CFR 159.33 - Proclaimed rate.

    Science.gov (United States)

    2010-04-01

    ... currency involved, such proclaimed rate shall be used unless it varies by 5 percent or more from the... (CONTINUED) LIQUIDATION OF DUTIES Conversion of Foreign Currency § 159.33 Proclaimed rate. If a rate of...

  17. Reduced Disparities in Birth Rates Among Teens

    Science.gov (United States)

    ... Teens Winnable Battles Social Media at CDC Reduced Disparities in Birth Rates among Teens Aged 15–19 ... Pregnancy Prevention Community-Wide Initiative. National Rates and Disparities Nationally, the teen birth rate (number of births ...

  18. 78 FR 73821 - Publication of Depreciation Rates

    Science.gov (United States)

    2013-12-09

    ... DEPARTMENT OF AGRICULTURE Rural Utilities Service Publication of Depreciation Rates AGENCY: Rural Utilities Service. ACTION: Notice of Depreciation Rates for Telecommunications Plant. SUMMARY: The United... programs, including the Telecommunications Program. RUS announces the depreciation rates for...

  19. 5 CFR 531.245 - Computing locality rates and special rates for GM employees.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Computing locality rates and special... Gm Employees § 531.245 Computing locality rates and special rates for GM employees. Locality rates and special rates are computed for GM employees in the same manner as locality rates and special rates...

  20. Energy reviews: the expense rate

    International Nuclear Information System (INIS)

    Chavanne, X.; Frangi, J.P.

    2008-01-01

    The threats against energy supplies push the prices of energy increasingly and lasting/ higher. Therefore it is important to establish the energy balance of an energy industry, which is more accurate than a too global financial balance. Life Cycle Analyses could be finely tuned using a method and tool suggested here: the T expense rate, the ratio between dissipated or spent energies, and extracted energy. T is a profitability indicator based on thermodynamics principles with 1 or 100 % as a theoretical limit. T is convenient too, because it can be broken down between the various steps or processes, and their D expenses. T also allows for a finely tuned analysis, to identify physical and technical parameters impacting the balance sheet. Uncertainties and arbitrary assumptions are explained, after having been boiled down to a minimum amount. A comparison between industries is thus possible for a given use (transportation, electrical production) depending on the form of energy extracted and the processes used. The energy balance is supplemented by the resource availability balance, different from the first one, even though availability may depend on it. (authors)

  1. Failure rate analysis using GLIMMIX

    International Nuclear Information System (INIS)

    Moore, L.M.; Hemphill, G.M.; Martz, H.F.

    1998-01-01

    This paper illustrates use of a recently developed SAS macro, GLIMMIX, for implementing an analysis suggested by Wolfinger and O'Connell (1993) in modeling failure count data with random as well as fixed factor effects. Interest in this software tool arose from consideration of modernizing the Failure Rate Analysis Code (FRAC), developed at Los Alamos National Laboratory in the early 1980's by Martz, Beckman and McInteer (1982). FRAC is a FORTRAN program developed to analyze Poisson distributed failure count data as a log-linear model, possibly with random as well as fixed effects. These statistical modeling assumptions are a special case of generalized linear mixed models, identified as GLMM in the current statistics literature. In the nearly 15 years since FRAC was developed, there have been considerable advances in computing capability, statistical methodology and available statistical software tools allowing worthwhile consideration of the tasks of modernizing FRAC. In this paper, the approaches to GLMM estimation implemented in GLIMMIX and in FRAC are described and a comparison of results for the two approaches is made with data on catastrophic time-dependent pump failures from a report by Martz and Whiteman (1984). Additionally, statistical and graphical model diagnostics are suggested and illustrated with the GLIMMIX analysis results

  2. Arrhenius Rate: constant volume burn

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-12-06

    A constant volume burn occurs for an idealized initial state in which a large volume of reactants at rest is suddenly raised to a high temperature and begins to burn. Due to the uniform spatial state, there is no fluid motion and no heat conduction. This reduces the time evolu tion to an ODE for the reaction progress variable. With an Arrhenius reaction rate, two characteristics of thermal ignition are illustrated: induction time and thermal runaway. The Frank-Kamenetskii approximation then leads to a simple expression for the adiabatic induction time. For a first order reaction, the analytic solution is derived and used to illustrate the effect of varying the activation temperature; in particular, on the induction time. In general, the ODE can be solved numerically. This is used to illustrate the effect of varying the reaction order. We note that for a first order reaction, the time evolution of the reaction progress variable has an exponential tail. In contrast, for a reaction order less than one, the reaction completes in a nite time. The reaction order also affects the induction time.

  3. Shapley ratings in brain networks

    Directory of Open Access Journals (Sweden)

    Rolf Kötter

    2007-11-01

    Full Text Available Recent applications of network theory to brain networks as well as the expanding empirical databases of brain architecture spawn an interest in novel techniques for analyzing connectivity patterns in the brain. Treating individual brain structures as nodes in a directed graph model permits the application of graph theoretical concepts to the analysis of these structures within their large-scale connectivity networks. In this paper, we explore the application of concepts from graph and game theory toward this end. Specifically, we utilize the Shapley value principle, which assigns a rank to players in a coalition based upon their individual contributions to the collective profit of that coalition, to assess the contributions of individual brain structures to the graph derived from the global connectivity network. We report Shapley values for variations of a prefrontal network, as well as for a visual cortical network, which had both been extensively investigated previously. This analysis highlights particular nodes as strong or weak contributors to global connectivity. To understand the nature of their contribution, we compare the Shapley values obtained from these networks and appropriate controls to other previously described nodal measures of structural connectivity. We find a strong correlation between Shapley values and both betweenness centrality and connection density. Moreover, a stepwise multiple linear regression analysis indicates that approximately 79% of the variance in Shapley values obtained from random networks can be explained by betweenness centrality alone. Finally, we investigate the effects of local lesions on the Shapley ratings, showing that the present networks have an immense structural resistance to degradation. We discuss our results highlighting the use of such measures for characterizing the organization and functional role of brain networks.

  4. Heart rate variability and swimming.

    Science.gov (United States)

    Koenig, Julian; Jarczok, Marc N; Wasner, Mieke; Hillecke, Thomas K; Thayer, Julian F

    2014-10-01

    Professionals in the domain of swimming have a strong interest in implementing research methods in evaluating and improving training methods to maximize athletic performance and competitive outcome. Heart rate variability (HRV) has gained attention in research on sport and exercise to assess autonomic nervous system activity underlying physical activity and sports performance. Studies on swimming and HRV are rare. This review aims to summarize the current evidence on the application of HRV in swimming research and draws implications for future research. A systematic search of databases (PubMed via MEDLINE, PSYNDEX and Embase) according to the PRISMA statement was employed. Studies were screened for eligibility on inclusion criteria: (a) empirical investigation (HRV) in humans (non-clinical); (b) related to swimming; (c) peer-reviewed journal; and (d) English language. The search revealed 194 studies (duplicates removed), of which the abstract was screened for eligibility. Fourteen studies meeting the inclusion criteria were included in the review. Included studies broadly fell into three classes: (1) control group designs to investigate between-subject differences (i.e. swimmers vs. non-swimmers, swimmers vs. other athletes); (2) repeated measures designs on within-subject differences of interventional studies measuring HRV to address different modalities of training or recovery; and (3) other studies, on the agreement of HRV with other measures. The feasibility and possibilities of HRV within this particular field of application are well documented within the existing literature. Future studies, focusing on translational approaches that transfer current evidence in general practice (i.e. training of athletes) are needed.

  5. 77 FR 36585 - Postal Rate Changes

    Science.gov (United States)

    2012-06-19

    ... Service notice of rate and changes affecting Inbound Air Parcel Post at Universal Postal Union (UPU) rates... United States Postal Service of Filing Changes in Rates Not of General Applicability and Application for... the Postal Service's explanation of Inbound Air Parcel Post (at UPU Rates) provided in the initial...

  6. Base Rates: Both Neglected and Intuitive

    Science.gov (United States)

    Pennycook, Gordon; Trippas, Dries; Handley, Simon J.; Thompson, Valerie A.

    2014-01-01

    Base-rate neglect refers to the tendency for people to underweight base-rate probabilities in favor of diagnostic information. It is commonly held that base-rate neglect occurs because effortful (Type 2) reasoning is required to process base-rate information, whereas diagnostic information is accessible to fast, intuitive (Type 1) processing…

  7. Dynamic half-rate connections in GSM

    NARCIS (Netherlands)

    Winands, E.M.M.; Wieland, J.; Sanders, B.

    2006-01-01

    Dynamic half-rate is an optional feature that allows a Global System for Mobile communication (GSM) cell to switch new incoming half-rate capable calls to half-rate speech coding, when the cell is nearly congested. Since two half-rate speech calls can be put together in one single-time slot, dynamic

  8. 24 CFR 206.21 - Interest rate.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Interest rate. 206.21 Section 206... CONVERSION MORTGAGE INSURANCE Eligibility; Endorsement Eligible Mortgages § 206.21 Interest rate. (a) Fixed interest rate. A fixed interest rate is agreed upon by the mortgagor and mortgagee. (b) Adjustable interest...

  9. 12 CFR 614.4155 - Interest rates.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Interest rates. 614.4155 Section 614.4155 Banks... Policies for Banks and Associations § 614.4155 Interest rates. Loans made by each bank and direct lender association shall bear interest at a rate or rates as may be determined by the institution board. The board...

  10. 7 CFR 4280.124 - Interest rates.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Interest rates. 4280.124 Section 4280.124 Agriculture... Improvements Program Section B. Guaranteed Loans § 4280.124 Interest rates. (a) The interest rate for the... in similar circumstances in the ordinary course of business. The interest rate charged is subject to...

  11. 7 CFR 4274.325 - Interest rates.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Interest rates. 4274.325 Section 4274.325 Agriculture... (IRP) § 4274.325 Interest rates. (a) Loans made by the Agency pursuant to this subpart shall bear interest at a fixed rate of 1 percent per annum over the term of the loan. (b) Interest rates charged by...

  12. 7 CFR 1950.105 - Interest rate.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Interest rate. 1950.105 Section 1950.105 Agriculture... rate. (a) The Soldiers and Sailors Relief Act requires that the effective interest rate charged a... Supervisor will send the borrower a letter which states that the interest rate on the borrower's FmHA or its...

  13. 7 CFR 1980.423 - Interest rates.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Interest rates. 1980.423 Section 1980.423 Agriculture... REGULATIONS (CONTINUED) GENERAL Business and Industrial Loan Program § 1980.423 Interest rates. (a) Guaranteed... variable as long as they are legal. Interest rates will be those rates customarily charged borrowers in...

  14. 48 CFR 942.704 - Billing rates.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION AND AUDIT SERVICES Indirect Cost Rates 942.704 Billing rates. (b) When the contracting officer or auditor responsible for establishing billing rates, in accordance with 48 CFR 42.704, has not established... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Billing rates. 942.704...

  15. 78 FR 62627 - Sam Rayburn Dam Rate

    Science.gov (United States)

    2013-10-22

    ..., Wholesale Rates for Hydro Power and Energy Sold to Sam Rayburn Dam Electric Cooperative, Inc. (Contract No... Schedule SRD-08, Wholesale Rates for Hydro Power and Energy Sold to Sam Rayburn Dam Electric Cooperative... ADMINISTRATION RATE SCHEDULE SRD-13 \\1\\ WHOLESALE RATES FOR HYDRO POWER AND ENERGY SOLD TO SAM RAYBURN DAM...

  16. 23 CFR 650.707 - Rating factor.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Rating factor. 650.707 Section 650.707 Highways FEDERAL..., STRUCTURES, AND HYDRAULICS Discretionary Bridge Candidate Rating Factor § 650.707 Rating factor. (a) The.... ER15OC02.010 The lower the rating factor, the higher the priority for selection and funding. (b) The terms...

  17. Factors influencing variation in dentist service rates.

    Science.gov (United States)

    Grembowski, D; Milgrom, P; Fiset, L

    1990-01-01

    In the previous article, we calculated dentist service rates for 200 general dentists based on a homogeneous, well-educated, upper-middle-class population of patients. Wide variations in the rates were detected. In this analysis, factors influencing variation in the rates were identified. Variation in rates for categories of dental services was explained by practice characteristics, patient exposure to fluoridated water supplies, and non-price competition in the dental market. Rates were greatest in large, busy practices in markets with high fees. Older practices consistently had lower rates across services. As a whole, these variables explained between 5 and 30 percent of the variation in the rates.

  18. Rate design in a competitive environment

    International Nuclear Information System (INIS)

    Wathen, J.M.

    1995-01-01

    Innovative rate designs used by several United States utilities to become more competitive, were presented. Considerations of retail wheeling and other services for increasing competitiveness were debated. The process for designing specialized rate programs was described, along with descriptions of special rate types, including economic development rates, load retention/anti-bypass rates, cogeneration/self-generation rates, distressed industry rates, load management rates and special situation rates. The existence of special provisions in state legislation allowing special rates to be offered was noted. Confidentiality and the need for a review process to ensure fairness of special agreements was discussed. The efficacy of using individual customer contracts to allow full recognition of the special characteristics and needs of individual customers and the effects of such contracts on the industry, were considered

  19. Corporate financing and anticipated credit rating changes

    OpenAIRE

    Hung, Chi-Hsiou D.; Banerjee, Anurag; Meng, Qingrui

    2017-01-01

    Firm circumstances change but rating agencies may not make timely revisions to their\\ud ratings, increasing information asymmetry between firms and the market. We examine\\ud whether firms time the securities market before a credit rating agency publicly reveals\\ud its decision to downgrade a firm's credit rating. Using quarterly data, we show that\\ud firms adjust their financing structures before credit rating downgrades are publicly\\ud revealed. More specifically, firms on average increase t...

  20. Exchange rate stabilization under imperfect credibility

    OpenAIRE

    Calvo, Guillermo; Vegh, Carlos

    1991-01-01

    This paper analyzes stabilization policy under predetermined exchange rates in a cash-in-advance, staggered-prices model. Under full credibility, a reduction in the rate of devaluation results in an immediate and permanent reduction in the inflation rate, with no effect on output or consumption. In contrast, a non-credible stabilization results in an initial expansion of output, followed by a later recession. The inflation rate of home goods remains above the rate of devaluation throughout...

  1. Exchange Rate Policy in Philippine Development

    OpenAIRE

    Bautista, Romeo M.

    2003-01-01

    This paper examines the conduct of exchange rate policy in the Philippines since the early 1980s, paying particular attention to the influence of exchange rate adjustments on relative production incentives. While primary interest is in the exchange rate regime and its incentive effects, the role of trade policy has to be simultaneously analyzed in view of its influence on the conduct of exchange rate policy as well as its direct effect on the real exchange rate. Moreover, there are analytical...

  2. Effective Exchange Rate Classifications and Growth

    OpenAIRE

    Justin M. Dubas; Byung-Joo Lee; Nelson C. Mark

    2005-01-01

    We propose an econometric procedure for obtaining de facto exchange rate regime classifications which we apply to study the relationship between exchange rate regimes and economic growth. Our classification method models the de jure regimes as outcomes of a multinomial logit choice problem conditional on the volatility of a country's effective exchange rate, a bilateral exchange rate and international reserves. An `effective' de facto exchange rate regime classification is then obtained by as...

  3. Intergenerational equity and the social discount rate

    OpenAIRE

    Scarborough, Helen

    2011-01-01

    Recent modelling of the costs and benefits of climate change has renewed debate regarding assumptions for the social discount rate in analysing the impacts of environmental change. Previous literature suggests two key factors influence estimates of the social discount rate: the rate of pure time preference and the elasticity of marginal utility of future consumption. These components of the social discount rate reinforce the linkages between the choice of social discount rate and intergenerat...

  4. 7 CFR 1714.5 - Determination of interest rates on municipal rate loans.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Determination of interest rates on municipal rate... General § 1714.5 Determination of interest rates on municipal rate loans. (a) RUS will post on the RUS website, Electric Program HomePage, a schedule of interest rates for municipal rate loans at the beginning...

  5. Mortality Rates Among Arab Americans in Michigan

    OpenAIRE

    Dallo, Florence J.; Schwartz, Kendra; Ruterbusch, Julie J.; Booza, Jason; Williams, David R.

    2012-01-01

    The objectives of this study were to: (1) calculate age-specific and age-adjusted cause-specific mortality rates for Arab Americans; and (2) compare these rates with those for blacks and whites. Mortality rates were estimated using Michigan death certificate data, an Arab surname and first name list, and 2000 U.S. Census data. Age-specific rates, age-adjusted all-cause and cause-specific rates were calculated. Arab Americans (75+) had higher mortality rates than whites and blacks. Among men, ...

  6. Fate of accreting white dwarfs: Type I supernovae vs collapse

    International Nuclear Information System (INIS)

    Nomoto, Ken'ichi.

    1986-01-01

    The final fate of accreting C + O white dwarfs is either thermonuclear explosion or collapse, if the white dwarf mass grows to the Chandrasekhar mass. We discuss how the fate depends on the initial mass, age, composition of the white dwarf and the mass accretion rate. Relatively fast accretion leads to a carbon deflagration at low central density that gives rise to a Type Ia supernova. Slower accretion induces a helium detonation that could be observed as a Type Ib supernova. If the initial mass of the C + O white dwarf is larger than 1.2 Msub solar, a carbon deflagration starts at high central density and induces a collapse of the white dwarf to form a neutron star. We examine the critical condition for which a carbon deflagration leads to collapse, not explosion. For the case of explosion, we discuss to what extent the nucleosynthesis models are consistent with spectra of Type Ia and Ib supernovae. 61 refs., 18 figs

  7. Hydrogen risk reduction in Nuclear power plant

    International Nuclear Information System (INIS)

    Movahed, M.A.; Travis, J.R.

    1999-01-01

    In case of a severe accident in a nuclear power plant with core melt and hydrogen production, the hydrogen risk is one of the main concerns. It may jeopardize the containment integrity due to violent deflagration that can lead to DDT (Deflagration Detonation Transient) or even detonation of proper hydrogen mitigation means are not available. The design of the EPR (European Pressurized water Reactor) Hydrogen mitigation and control system is based on the lumped parameter code WAVCO and the 3D code GASFLOW. The concept consists of recombiners and igniters to cope with all scenarios including those without steam. The system has been checked to avoid DDT by the 7λ criteria that's implemented in GASFLOW. Future analysis could deal with determining dynamic pressure loads, if appropriate, and some sensitivity studies to check the hydrogen control measures with respect to different source locations and mass flow rates. Also a conditional criterion for determining the likelihood of fast deflagration should be developed. (author)

  8. What does self rated mental health represent

    Directory of Open Access Journals (Sweden)

    Daphna Levinson

    2014-12-01

    Full Text Available Background. Unlike the widely used self rated health, the self rated mental health was found unsuitable as a proxy for mental illness. This paper analyses the relationships between the self ratings of physical health, mental health and overall health, and their association of with the objective indicators for physical and mental health. Design and methods. The study is a secondary analysis of data from a nationwide representative sample of the non-institutionalized adult residents of Israel in 2003 that was collected via computer-assisted personal interview methods [n=4859].Results. The self rated physical health and the self rated mental health were strongly related to each other yet the self rated mental health was not related to chronic physical conditions and the self rated physical health was not related to mental disorders. In a multiple logistic regression analysis, those with positive self rated mental health had 93 times the odds of reporting positive overall health whereas those with positive self rated physical health had 40 times the odds of reporting positive overall health. Conclusions. The self rating of mental health presents a qualitatively different dimension from mental illness. The self rated mental health is two times more important than the self rated physical health in predicting the self rated overall health

  9. Prostate Cancer Rates by Race and Ethnicity

    Science.gov (United States)

    ... HPV-Associated Lung Ovarian Skin Uterine Cancer Home Prostate Cancer Rates by Race and Ethnicity Language: English (US) ... Tweet Share Compartir The rate of men getting prostate cancer or dying from prostate cancer varies by race ...

  10. Rate type isotach compaction of consolidated sandstone

    NARCIS (Netherlands)

    Waal, J.A. de; Thienen-Visser, K. van; Pruiksma, J.P.

    2015-01-01

    Laboratory experiments on samples from a consolidated sandstone reservoir are presented that demonstrate rate type compaction behaviour similar to that observed on unconsolidated sands and soils. Such rate type behaviour can have large consequences for reservoir compaction, surface subsidence and

  11. 76 FR 48159 - Integrated System Power Rates

    Science.gov (United States)

    2011-08-08

    ... DEPARTMENT OF ENERGY Southwestern Power Administration Integrated System Power Rates AGENCY... American Electric Reliability Corporation and to cover increased investments and replacements in..., prepared a Current Power Repayment Study using existing system rates. The Study indicates that Southwestern...

  12. Colorectal Cancer Rates by Race and Ethnicity

    Science.gov (United States)

    ... Associated Lung Ovarian Prostate Skin Uterine Cancer Home Colorectal Cancer Rates by Race and Ethnicity Language: English (US) ... Tweet Share Compartir The rate of people getting colorectal cancer or dying from colorectal cancer varies by race ...

  13. Predicting Performance Ratings Using Motivational Antecedents

    National Research Council Canada - National Science Library

    Zazania, Michelle

    1998-01-01

    This research examined the role of motivation in predicting peer and trainer ratings of student performance and contrasted the relative importance of various antecedents for peer and trainer ratings...

  14. Stochastic interest rates model in compounding | Galadima ...

    African Journals Online (AJOL)

    Stochastic interest rates model in compounding. ... in finance, real estate, insurance, accounting and other areas of business administration. The assumption that future rates are fixed and known with certainty at the beginning of an investment, ...

  15. Mortality rates in people with intellectual disabilities

    Directory of Open Access Journals (Sweden)

    Rachael Williams

    2017-04-01

    National English data confirm that patients with ID have higher mortality rates than those without. Mortality rates for patients with ID were higher across all age/sex groups and causes, with almost half of deaths classified as avoidable.

  16. 77 FR 44571 - Rate Regulation Reforms

    Science.gov (United States)

    2012-07-30

    ... current T-bill rate to the U.S. Prime Rate, as published in The Wall Street Journal. Additional... ``exponential'' approach, the total cumulative reparations payment (including interest) is calculated by...

  17. National Marriage and Divorce Rate Trends

    Science.gov (United States)

    ... Vital Statistics Online National Death Index NCHS National Marriage and Divorce Rate Trends Recommend on Facebook Tweet Share Compartir Provisional number of marriages and marriage rate: United States, 2000-2014 Year ...

  18. Dose-rate dependence of thermoluminescence response

    International Nuclear Information System (INIS)

    McKeever, S.W.S.; Chen, R.; Groom, P.J.; Durrani, S.A.

    1980-01-01

    The previously observed dose-rate effect of thermoluminescence in quartz at high dose-rates is given at theoretical formulation. Computer calculations simulating the experimental conditions yield similar results to the experimental ones. (orig.)

  19. Measuring the costs of exchange rate volatility

    OpenAIRE

    Paul R. Bergin

    2004-01-01

    Many countries go to great lengths to manage their exchange rates. Probably the most prominent recent example is the European Monetary Union, where all the members abandoned their national currencies and adopted the euro. A number of developing countries maintain other kinds of regimes of managed exchange rates, even though they face potent market pressures to let their exchange rates float. One of the main motives for these arrangements stems from the extreme volatility of exchange rates. Th...

  20. Rate control for electron gun evaporation

    International Nuclear Information System (INIS)

    Schellingerhout, A.J.G.; Janocko, M.A.; Klapwijk, T.M.; Mooij, J.E.

    1989-01-01

    Principles for obtaining high-quality rate control for electron gun evaporation are discussed. The design criteria for rate controllers are derived from this analysis. Results are presented which have been obtained with e-guns whose evaporation rate is controlled by a Wehnelt electrode or by sweeping of the electron beam. Further improvements of rate stability can be obtained by improved design of e-guns and power supplies

  1. Cyclotron heating rate in a parabolic mirror

    International Nuclear Information System (INIS)

    Smith, P.K.

    1984-01-01

    Cyclotron resonance heating rates are found for a parabolic magnetic mirror. The equation of motion for perpendicular velocity is solved, including the radial magnetic field terms neglected in earlier papers. The expression for heating rate involves an infinite series of Anger's and Weber's functions, compared with a single term of the unrevised expression. The new results show an increase of heating rate compared with previous results. A simple expression is given for the ratio of the heating rates. (author)

  2. The Neutral Interest Rate: Estimates for Chile

    OpenAIRE

    Rodrigo Fuentes S; Fabián Gredig U.

    2008-01-01

    To estimate the neutral real interest rate for Chile, we use a variety of methods that can be classified into three categories: those derived from economic theory, the neutral rate implicit in financial assets, and statistical procedures using macroeconomic data. We conclude that the neutral rate is not constant over time, but it is closely related with—though not equivalent to—the potential GDP growth rate. The application of the different methods yields fairly similar results. The neutral r...

  3. Measuring Implicit Rental Rates for Farm Capital

    OpenAIRE

    Hrubovcak, James

    1986-01-01

    Developing implicit rental rates for capital inputs is an Important step in understanding the Impact of tax law changes on agricultural investments This article develops a methodology for estimating implicit rental rates and presents annual estimates of rental rates for seven categories of farm equipment and structures from 1955 to 1979 This article also compares these rental rates With those estimated under a no-tax alternative The author developed a method for estimating marginal Federal In...

  4. The local authority rating of independent generators

    International Nuclear Information System (INIS)

    Chapman, G.C.

    1991-01-01

    A brief history of the rating is given covering the public utilities. Formula rating of the nationalised electricity supply industry is described with independent generators' rates, the effect of privatisation and the longer term outlook considered. The need to convince the UK government that power generating machinery should no more be rated than any manufacturing or process machinery, and that all power producers should be treated the same is noted. (Author)

  5. Points of Interest: What Determines Interest Rates?

    Science.gov (United States)

    Schilling, Tim

    Interest rates can significantly influence people's behavior. When rates decline, homeowners rush to buy new homes and refinance old mortgages; automobile buyers scramble to buy new cars; the stock market soars, and people tend to feel more optimistic about the future. But even though individuals respond to changes in rates, they may not fully…

  6. Atmospheric production rate of {sup 36}Cl

    Energy Technology Data Exchange (ETDEWEB)

    Parrat, Y.; Hajdas, W.; Baltensperger, U.; Synal, H.A.; Kubik, P.W.; Gaeggeler, H.W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Suter, M. [Eidgenoessische Technische Hochschule, Zurich (Switzerland)

    1997-09-01

    Using experimental cross sections, a new calculation of the atmospheric production rate of {sup 36}Cl was carried out. A mean production rate of 20 atoms m{sup -2}s{sup -1} was obtained, which is lower than mean {sup 36}Cl deposition rates. (author) 2 figs., 7 refs.

  7. Exchange rate policy under sovereign default risk

    OpenAIRE

    Schabert, Andreas

    2011-01-01

    We examine monetary policy options for a small open economy where sovereign default might occur due to intertemporal insolvency. Under interest rate policy and floating exchange rates the equilibrium is indetermined. Under a fixed exchange rate the equilibrium is uniquely determined and independent of sovereign default.

  8. 40 CFR 1033.140 - Rated power.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Rated power. 1033.140 Section 1033.140... EMISSIONS FROM LOCOMOTIVES Emission Standards and Related Requirements § 1033.140 Rated power. This section describes how to determine the rated power of a locomotive for the purposes of this part. (a) A locomotive...

  9. 76 FR 16570 - Interest Rate Risk

    Science.gov (United States)

    2011-03-24

    ... NATIONAL CREDIT UNION ADMINISTRATION 12 CFR Part 741 RIN 3133-AD66 Interest Rate Risk AGENCY... regulations to require Federally insured credit unions to have a written policy addressing interest rate risk... Risk Management for Credit Unions with Large Positions in Fixed Rate Mortgages; 06-CU-16 Inter-Agency...

  10. 12 CFR 563e.28 - Assigned ratings.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Assigned ratings. 563e.28 Section 563e.28 Banks... for Assessing Performance § 563e.28 Assigned ratings. (a) Ratings in general. Subject to paragraphs (b... performance under the lending, investment and service tests, the community development test, the small savings...

  11. Factors influencing HIV seroprevalence rate among pregnant ...

    African Journals Online (AJOL)

    Human immune deficiency virus (HIV) seroprevalence among pregnant women in Calabar was studied. The aims were to establish HIV seroprevalence rate and to identify factors which influence this rate in our pregnant women. HIV seroprevalence rate of 2.7% among antenatal women in Calabar was recorded with a ...

  12. Smoking, Discount Rates, and Returns to Education

    Science.gov (United States)

    Fersterer, Josef; Winter-Ebmer, Rudolf

    2003-01-01

    Individual time preference determines schooling enrolment. Moreover, smoking behavior in early ages has been shown to be highly related to time preference rates. Insofar as discount rates are uncorrelated to ability, predicting school enrolment by discount rates can get rid of the ability bias in an earnings regression. Accordingly, we use smoking…

  13. 18 CFR 704.39 - Discount rate.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Discount rate. 704.39... STANDARDS AND PROCEDURES Standards for Plan Formulation and Evaluation § 704.39 Discount rate. (a) The interest rate to be used in plan formulation and evaluation for discounting future benefits and computing...

  14. Currency crises and the interest rate defence

    NARCIS (Netherlands)

    Daniëls, T.

    2008-01-01

    While virtually all modern models of exchange rate crises recognise that the decision to abandon an exchange rate peg depends on how harshly policy makers are willing to defend the regime, they virtually never model how the exchange rate is defended. We argue that incorporating both the mechanics of

  15. Uncertain discount rates in climate policy analysis

    International Nuclear Information System (INIS)

    Newell, R.G.; Pizer, W.A.

    2004-01-01

    Consequences in the distant future - such as those from climate change--have little value today when discounted using conventional rates. This result contradicts our 'gut feeling' about such problems and often leads to ad hoc application of lower rates for valuations over longer horizons - a step facilitated by confusion and disagreement over the correct rate even over short horizons. We review the theory and intuition behind the choice of discount rates now and, importantly, the impact of likely variation in rates in the future. Correlated changes in future rates imply that the distant future should be discounted at much lower rates than suggested by the current rate, thereby raising the value of future consequences - regardless of opinions concerning the current rate. Using historic data to quantity the likely changes and correlation in changes in future rates, we find that future valuations rise by a factor of many thousands at horizons of 300 years or more, almost doubling the expected present value of climate mitigation benefits relative to constant 4% discounting. Ironically, uncertainty about future rates reduces the ratio of valuations based on alternate choices of the current rate

  16. 24 CFR 232.560 - Interest rate.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Interest rate. 232.560 Section 232... Equipment Eligible Security Instruments § 232.560 Interest rate. (a) The loan shall bear interest at the rate agreed upon by the lender and the borrower. (b) Interest shall be payable in monthly installments...

  17. 7 CFR 3550.66 - Interest rate.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Interest rate. 3550.66 Section 3550.66 Agriculture... DIRECT SINGLE FAMILY HOUSING LOANS AND GRANTS Section 502 Origination § 3550.66 Interest rate. Loans will be written using the applicable RHS interest rate in effect at loan approval or loan closing...

  18. 24 CFR 200.83 - Interest rate.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Interest rate. 200.83 Section 200... Eligibility Requirements for Existing Projects Mortgage Provisions § 200.83 Interest rate. (a) The mortgage shall bear interest at the rate agreed upon by the mortgagee and the mortgagor. (b) Interest shall be...

  19. 8 CFR 293.2 - Interest rate.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Interest rate. 293.2 Section 293.2 Aliens... CASH RECEIVED TO SECURE IMMIGRATION BONDS § 293.2 Interest rate. The Secretary of the Treasury has determined that effective from date of deposit occurring after April 27, 1966, the interest rate shall be 3...

  20. 5 CFR 1655.7 - Interest rate.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Interest rate. 1655.7 Section 1655.7 Administrative Personnel FEDERAL RETIREMENT THRIFT INVESTMENT BOARD LOAN PROGRAM § 1655.7 Interest rate. (a... interest rate established by the Department of the Treasury in effect on the date the TSP record keeper...

  1. 13 CFR 120.932 - Interest rate.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Interest rate. 120.932 Section 120.932 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Development Company Loan Program (504) 504 Loans and Debentures § 120.932 Interest rate. The interest rate of the 504 Loan...

  2. 77 FR 65664 - Publication of Depreciation Rates

    Science.gov (United States)

    2012-10-30

    ... DEPARTMENT OF AGRICULTURE Rural Utilities Service Publication of Depreciation Rates AGENCY: Rural... announces the depreciation rates for telecommunications plant for the period ending December 31, 2011. DATES... Loans, Sec. 1737.70(e) explains the depreciation rates that are used by RUS in its feasibility studies...

  3. 76 FR 72672 - Publication of Depreciation Rates

    Science.gov (United States)

    2011-11-25

    ... DEPARTMENT OF AGRICULTURE Rural Utilities Service Publication of Depreciation Rates AGENCY: Rural... announces the depreciation rates for telecommunications plant for the period ending December 31, 2010. DATES..., Sec. 1737.70(e) explains the depreciation rates that are used by RUS in its feasibility studies. Sec...

  4. 76 FR 6762 - Publication of Depreciation Rates

    Science.gov (United States)

    2011-02-08

    ... DEPARTMENT OF AGRICULTURE Rural Utilities Service Publication of Depreciation Rates AGENCY: Rural... States Department of Agriculture (USDA), announces the depreciation rates for telecommunications plant...) explains the depreciation rates that are used by RUS in its feasibility studies. Sec. 1737.70(e)(2) refers...

  5. 7 CFR 25.104 - Poverty rate.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Poverty rate. 25.104 Section 25.104 Agriculture Office... § 25.104 Poverty rate. (a) General. Eligibility of an area on the basis of poverty shall be established in accordance with the following poverty rate criteria specific to Round I, Round II, Round IIS and...

  6. 24 CFR 597.103 - Poverty rate.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Poverty rate. 597.103 Section 597... Area Requirements § 597.103 Poverty rate. (a) General. The poverty rate shall be established in accordance with the following criteria: (1) In each census tract within a nominated urban area, the poverty...

  7. 24 CFR 598.115 - Poverty rate.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Poverty rate. 598.115 Section 598... Requirements § 598.115 Poverty rate. (a) General. In order to be eligible for designation, an area's poverty... poverty rate must be not less than 20 percent; and (2) For at least 90 percent of the census tracts within...

  8. Test Review: Autism Spectrum Rating Scales

    Science.gov (United States)

    Simek, Amber N.; Wahlberg, Andrea C.

    2011-01-01

    This article reviews Autism Spectrum Rating Scales (ASRS) which are designed to measure behaviors in children between the ages of 2 and 18 that are associated with disorders on the autism spectrum as rated by parents/caregivers and/or teachers. The rating scales include items related to behaviors associated with Autism, Asperger's Disorder, and…

  9. Have Floating Rates Been a Success?

    Science.gov (United States)

    Higham, David

    1983-01-01

    Floating exchange rates have not lived up to all expectations, but neither have they performed as badly as some critics have suggested. Examined are the impact of floating rates on balance of payments adjustment, domestic economic policy, and inflation and the claim that floating rates have displayed excessive fluctuations. (Author/RM)

  10. International convergence of capital market interest rates.

    NARCIS (Netherlands)

    Fase, M.M.G.; Vlaar, P.J.G.

    1997-01-01

    This article investigates the extent of capital market interest rate convergence among six EU countries on the one hand, and a group of four countries with floating exchange rates - US, Germany, Japan and Switzerland - on the other. We conclude that interest rate changes within the EU have been and

  11. The Deceptive Resilience of Fixed Exchange Rates

    OpenAIRE

    Mushin, Jerry

    2004-01-01

    This paper is an examination of the experience of exchange-rate systems since 1978. Despite the accelerating trend in favour of floating exchange rates, a substantial minority of IMF members have continued to fix the value of their currencies. The recent incidence of each of the principal types of exchange-rate peg is described.

  12. 7 CFR 1435.101 - Loan rates.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Loan rates. 1435.101 Section 1435.101 Agriculture... AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS SUGAR PROGRAM Sugar Loan Program § 1435.101 Loan rates. (a) The national average loan rate for raw cane sugar produced from domestically grown sugarcane is: 18...

  13. 33 CFR 159.69 - Motor ratings.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Motor ratings. 159.69 Section 159.69 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.69 Motor ratings. Motors must be rated...

  14. Exchange Rate and the PRC Foreign Trade

    Directory of Open Access Journals (Sweden)

    Izotov D. A.

    2009-09-01

    Full Text Available The stages of exchange rate regulation and foreign trade systems reforming in PRC during the period 1978-2008 are examined. A quantitative assessment of PRC foreign trade parameters reactions to the currency rate dynamics on the national and regional levels is made. Also the import and export impact of potential exchange rate changes is estimated

  15. Tabulated Neutron Emission Rates for Plutonium Oxide

    Energy Technology Data Exchange (ETDEWEB)

    Shores, Erik Frederick [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-24

    This work tabulates neutron emission rates for 80 plutonium oxide samples as reported in the literature. Plutonium-­238 and plutonium-­239 oxides are included and such emission rates are useful for scaling tallies from Monte Carlo simulations and estimating dose rates for health physics applications.

  16. 78 FR 25101 - Credit Ratings Roundtable

    Science.gov (United States)

    2013-04-29

    ... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-69433; File No. 4-661] Credit Ratings... examine issues in connection with the possibility of developing a credit rating assignment system. The... FURTHER INFORMATION CONTACT: Scott Davey at (212) 336-0075, Office of Credit Ratings, Securities and...

  17. 5 CFR 430.308 - Rating performance.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Rating performance. 430.308 Section 430.308 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERFORMANCE MANAGEMENT Managing Senior Executive Performance § 430.308 Rating performance. (a) Initial summary rating...

  18. 18 CFR 284.10 - Rates.

    Science.gov (United States)

    2010-04-01

    ... of the Natural Gas Act. (3) Differentiation due to time and distance. Any rate filed for service... Subpart G of this part, it may not charge, in a transaction involving its marketing affiliate, a rate that is lower than the highest rate it charges in any transaction not involving its marketing affiliate...

  19. Inflation Rates, Car Devaluation, and Chemical Kinetics.

    Science.gov (United States)

    Pogliani, Lionello; Berberan-Santos, Mario N.

    1996-01-01

    Describes the inflation rate problem and offers an interesting analogy with chemical kinetics. Presents and solves the car devaluation problem as a normal chemical kinetic problem where the order of the rate law and the value of the rate constant are derived. (JRH)

  20. Atmospheric production rate of 36Cl

    International Nuclear Information System (INIS)

    Parrat, Y.; Hajdas, W.; Baltensperger, U.; Synal, H.A.; Kubik, P.W.; Gaeggeler, H.W.; Suter, M.

    1997-01-01

    Using experimental cross sections, a new calculation of the atmospheric production rate of 36 Cl was carried out. A mean production rate of 20 atoms m -2 s -1 was obtained, which is lower than mean 36 Cl deposition rates. (author) 2 figs., 7 refs

  1. Credit Ratings and Bank Monitoring Ability

    NARCIS (Netherlands)

    Nakamura, L.I.; Roszbach, K.

    2010-01-01

    In this paper we use credit rating data from two Swedish banks to elicit evidence on these banks’ loan monitoring ability. We do so by comparing the ability of bank ratings to predict loan defaults relative to that of public ratings from the Swedish credit bureau. We test the banks’ abilility to

  2. Generation of missiles and destructive shock fronts and their consequences

    International Nuclear Information System (INIS)

    Porter, W.H.L.

    1980-01-01

    A general review is given of the generation of missiles and shock fronts from vessels and turbines and the formation and generation of deflagration and detonation waves in the atmosphere after the release of inflammable material. The considerations involved in evaluation the penetration of steel and concrete structures and the effects of pressure waves are presented with particular emphasis on dimensional analysis. The formation and ignition of flammable vapour clouds is considered and the distinction drawn between simple combustion, deflagration and detonation. The rates of release and impulse loadings on vessels resulting from holes or splits are also reviewed. (author)

  3. Modeling Equity for Alternative Water Rate Structures

    Science.gov (United States)

    Griffin, R.; Mjelde, J.

    2011-12-01

    The rising popularity of increasing block rates for urban water runs counter to mainstream economic recommendations, yet decision makers in rate design forums are attracted to the notion of higher prices for larger users. Among economists, it is widely appreciated that uniform rates have stronger efficiency properties than increasing block rates, especially when volumetric prices incorporate intrinsic water value. Yet, except for regions where water market purchases have forced urban authorities to include water value in water rates, economic arguments have weakly penetrated policy. In this presentation, recent evidence will be reviewed regarding long term trends in urban rate structures while observing economic principles pertaining to these choices. The main objective is to investigate the equity of increasing block rates as contrasted to uniform rates for a representative city. Using data from four Texas cities, household water demand is established as a function of marginal price, income, weather, number of residents, and property characteristics. Two alternative rate proposals are designed on the basis of recent experiences for both water and wastewater rates. After specifying a reasonable number (~200) of diverse households populating the city and parameterizing each household's characteristics, every household's consumption selections are simulated for twelve months. This procedure is repeated for both rate systems. Monthly water and wastewater bills are also computed for each household. Most importantly, while balancing the budget of the city utility we compute the effect of switching rate structures on the welfares of households of differing types. Some of the empirical findings are as follows. Under conditions of absent water scarcity, households of opposing characters such as low versus high income do not have strong preferences regarding rate structure selection. This changes as water scarcity rises and as water's opportunity costs are allowed to

  4. Drying Rate of Carbonate of Nickel

    Directory of Open Access Journals (Sweden)

    Ing. Aymara Ricardo-Riverón

    2015-11-01

    Full Text Available In the present work, the drying rate of carbonate of nickel was studied experimentally at the laboratory scale. The values of critical moisture are shown and the graphics: characteristic curve of drying rate and the moisture dependence of the time. Models ware obtained to estimate the slope of the constant - rate period and to the falling - rate period until the equilibrium humidity, in dependence of external factors: drying temperature, initial moisture and the pH of the slurry. The chemical composition of the carbonate didn't exercise effect statistically significant over the drying rate.

  5. Tank Z-361 dose rate calculations

    International Nuclear Information System (INIS)

    Richard, R.F.

    1998-01-01

    Neutron and gamma ray dose rates were calculated above and around the 6-inch riser of tank Z-361 located at the Plutonium Finishing Plant. Dose rates were also determined off of one side of the tank. The largest dose rate 0.029 mrem/h was a gamma ray dose and occurred 76.2 cm (30 in.) directly above the open riser. All other dose rates were negligible. The ANSI/ANS 1991 flux to dose conversion factor for neutrons and photons were used in this analysis. Dose rates are reported in units of mrem/h with the calculated uncertainty shown within the parentheses

  6. Dose Rate Effects in Linear Bipolar Transistors

    Science.gov (United States)

    Johnston, Allan; Swimm, Randall; Harris, R. D.; Thorbourn, Dennis

    2011-01-01

    Dose rate effects are examined in linear bipolar transistors at high and low dose rates. At high dose rates, approximately 50% of the damage anneals at room temperature, even though these devices exhibit enhanced damage at low dose rate. The unexpected recovery of a significant fraction of the damage after tests at high dose rate requires changes in existing test standards. Tests at low temperature with a one-second radiation pulse width show that damage continues to increase for more than 3000 seconds afterward, consistent with predictions of the CTRW model for oxides with a thickness of 700 nm.

  7. Foreshock occurrence rates before large earthquakes worldwide

    Science.gov (United States)

    Reasenberg, P.A.

    1999-01-01

    Global rates of foreshock occurrence involving shallow M ??? 6 and M ??? 7 mainshocks and M ??? 5 foreshocks were measured, using earthquakes listed in the Harvard CMT catalog for the period 1978-1996. These rates are similar to rates ones measured in previous worldwide and regional studies when they are normalized for the ranges of magnitude difference they each span. The observed worldwide rates were compared to a generic model of earthquake clustering, which is based on patterns of small and moderate aftershocks in California, and were found to exceed the California model by a factor of approximately 2. Significant differences in foreshock rate were found among subsets of earthquakes defined by their focal mechanism and tectonic region, with the rate before thrust events higher and the rate before strike-slip events lower than the worldwide average. Among the thrust events a large majority, composed of events located in shallow subduction zones, registered a high foreshock rate, while a minority, located in continental thrust belts, measured a low rate. These differences may explain why previous surveys have revealed low foreshock rates among thrust events in California (especially southern California), while the worldwide observations suggest the opposite: California, lacking an active subduction zone in most of its territory, and including a region of mountain-building thrusts in the south, reflects the low rate apparently typical for continental thrusts, while the worldwide observations, dominated by shallow subduction zone events, are foreshock-rich.

  8. Gamma dose rate effect on JFET transistors

    International Nuclear Information System (INIS)

    Assaf, J.

    2011-04-01

    The effect of Gamma dose rate on JFET transistors is presented. The irradiation was accomplished at the following available dose rates: 1, 2.38, 5, 10 , 17 and 19 kGy/h at a constant dose of 600 kGy. A non proportional relationship between the noise and dose rate in the medium range (between 2.38 and 5 kGy/h) was observed. While in the low and high ranges, the noise was proportional to the dose rate as the case of the dose effect. This may be explained as follows: the obtained result is considered as the yield of a competition between many reactions and events which are dependent on the dose rate. At a given values of that events parameters, a proportional or a non proportional dose rate effects are generated. No dependence effects between the dose rate and thermal annealing recovery after irradiation was observed . (author)

  9. Reduced Dietary Sodium Intake Increases Heart Rate

    DEFF Research Database (Denmark)

    Graudal, Niels A; Hubeck-Graudal, Thorbjørn; Jürgens, Gesche

    2016-01-01

    Reduced dietary sodium intake (sodium reduction) increases heart rate in some studies of animals and humans. As heart rate is independently associated with the development of heart failure and increased risk of premature death a potential increase in heart rate could be a harmful side......-effect of sodium reduction. The purpose of the present meta-analysis was to investigate the effect of sodium reduction on heart rate. Relevant studies were retrieved from an updated pool of 176 randomized controlled trials (RCTs) published in the period 1973-2014. Sixty-three of the RCTs including 72 study...... populations reported data on heart rate. In a meta-analysis of these data sodium reduction increased heart rate with 1.65 beats per minute [95% CI: 1.19, 2.11], p heart rate. This effect was independent of baseline blood pressure. In conclusion sodium reduction...

  10. Rate shock crisis faces completed nukes

    International Nuclear Information System (INIS)

    Utroska, D.

    1982-01-01

    Political reluctance on the part of regulators to grant utilities a full rate base for large generating plants is a new crisis facing utilities with newly completed nuclear plants. Zero- or partial-rate treatment for large new plants will increase the financial strains of electric companies if they cannot recover their investment. Such rate decisions will affect the commitment to uncompleted and planned nuclear plants as the economic advantage is removed. Economists warn that consumer resistance to large rate increases to cover construction periods could lead to an overhaul of regulatory practices. Alternatives to sudden rate shocks could be moderated with phased-in increases or rate trending. Analysts disagree on whether consumer opposition is the beginning of a national movement or a regional response, but if other states follow Alabama's example of turning rate decisions over to the courts, it may confirm their assessment that the trending approach is unworkable

  11. Optimum solar collector fluid flow rates

    DEFF Research Database (Denmark)

    Furbo, Simon; Shah, Louise Jivan

    1996-01-01

    Experiments showed that by means of a standard electronically controlled pump, type UPE 2000 from Grundfos it is possible to control the flow rate in a solar collector loop in such a way that the flow rate is strongly influenced by the temperature of the solar collector fluid passing the pump....... The flow rate is increasing for increasing temperature.The flow rate at the high temperature level is typically 70 % greater than the flow rate at the low temperature level.Further, the energy consumption for the electronically controlled pump in a solar heating system will be somewhat smaller than...... the energy consumption of a normal ciculation pump in the solar heating system.Calculations showed that the highest thermal performances for small SDHW systems based on mantle tanks with constant volume flow rates in the solar collector loops are achieved if the flow rate is situated in the interval from 0...

  12. Bayesian estimation of dose rate effectiveness

    International Nuclear Information System (INIS)

    Arnish, J.J.; Groer, P.G.

    2000-01-01

    A Bayesian statistical method was used to quantify the effectiveness of high dose rate 137 Cs gamma radiation at inducing fatal mammary tumours and increasing the overall mortality rate in BALB/c female mice. The Bayesian approach considers both the temporal and dose dependence of radiation carcinogenesis and total mortality. This paper provides the first direct estimation of dose rate effectiveness using Bayesian statistics. This statistical approach provides a quantitative description of the uncertainty of the factor characterising the dose rate in terms of a probability density function. The results show that a fixed dose from 137 Cs gamma radiation delivered at a high dose rate is more effective at inducing fatal mammary tumours and increasing the overall mortality rate in BALB/c female mice than the same dose delivered at a low dose rate. (author)

  13. Increased heart rate variability but normal resting metabolic rate in hypocretin/orexin-deficient human narcolepsy.

    NARCIS (Netherlands)

    Fronczek, R.; Overeem, S.; Reijntjes, R.; Lammers, G.J.; Dijk, J.G.M.; Pijl, H.

    2008-01-01

    STUDY OBJECTIVES: We investigated autonomic balance and resting metabolic rate to explore their possible involvement in obesity in hypocretin/orexin-deficient narcoleptic subjects. METHODS: Resting metabolic rate (using indirect calorimetry) and variability in heart rate and blood pressure were

  14. 10 CFR 903.21 - Completion of rate development; provisional rates.

    Science.gov (United States)

    2010-01-01

    ... business principles. The rates shall be submitted promptly to the FERC for confirmation and approval on a..., Southwestern, and Western Area Power Administrations § 903.21 Completion of rate development; provisional rates...

  15. Split credit ratings and the prediction of bank ratings in the Basel II environment

    OpenAIRE

    Barton, Amanda

    2006-01-01

    This thesis investigates two aspects of credit risk measurement in the context of Basel 11: The International Convergence of Capital Measurement and Capital Standards. The first is the problem arising when two credit rating agencies disagree over the rating assigned to an issuer and a split rating arises. The second area is the determination of internal credit rating models for use under the Internal ratings-based approach. This thesis presents a variety of bank rating modes for individual an...

  16. Pass-through of Change in Policy Interest Rate to Market Rates

    OpenAIRE

    M. Idrees Khawaja; Sajawal Khan

    2008-01-01

    This paper examines the pass through of the change in policy interest rate of the central bank of Pakistan to market interest rates. The market rates examined include KIBOR, six month deposit rate and weighted average lending rate. More or less complete pass-through of the change in policy rate to KIBOR is observed within one month. However, the magnitude of change in policy rate to deposit and lending rate is not only low but is slow as well. The pass-through to the weighted average lending ...

  17. GROWTH RATE DISTRIBUTION OF BORAX SINGLE CRYSTALS ON THE (001 FACE UNDER VARIOUS FLOW RATES

    Directory of Open Access Journals (Sweden)

    Suharso Suharso

    2010-06-01

    Full Text Available The growth rates of borax single crystals from aqueous solutions at various flow rates in the (001 direction were measured using in situ cell method. From the growth rate data obtained, the growth rate distribution of borax crystals was investigated using Minitab Software and SPSS Software at relative supersaturation of 0807 and temperature of 25 °C. The result shows that normal, gamma, and log-normal distribution give a reasonably good fit to GRD. However, there is no correlation between growth rate distribution and flow rate of solution.   Keywords: growth rate dispersion (GRD, borax, flow rate

  18. Hand hygiene compliance rates: Fact or fiction?

    Science.gov (United States)

    McLaws, Mary-Louise; Kwok, Yen Lee Angela

    2018-05-16

    The mandatory national hand hygiene program requires Australian public hospitals to use direct human auditing to establish compliance rates. To establish the magnitude of the Hawthorne effect, we compared direct human audit rates with concurrent automated surveillance rates. A large tertiary Australian teaching hospital previously trialed automated surveillance while simultaneously performing mandatory human audits for 20 minutes daily on a medical and a surgical ward. Subtracting automated surveillance rates from human audit rates provided differences in percentage points (PPs) for each of the 3 quarterly reporting periods for 2014 and 2015. Direct human audit rates for the medical ward were inflated by an average of 55 PPs in 2014 and 64 PPs in 2015, 2.8-3.1 times higher than automated surveillance rates. The rates for the surgical ward were inflated by an average of 32 PPs in 2014 and 31 PPs in 2015, 1.6 times higher than automated surveillance rates. Over the 6 mandatory reporting quarters, human audits collected an average of 255 opportunities, whereas automation collected 578 times more data, averaging 147,308 opportunities per quarter. The magnitude of the Hawthorne effect on direct human auditing was not trivial and produced highly inflated compliance rates. Mandatory compliance necessitates accuracy that only automated surveillance can achieve, whereas daily hand hygiene ambassadors or reminder technology could harness clinicians' ability to hyperrespond to produce habitual compliance. Crown Copyright © 2018. Published by Elsevier Inc. All rights reserved.

  19. Factors Impacting Online Ratings for Otolaryngologists.

    Science.gov (United States)

    Calixto, Nathaniel E; Chiao, Whitney; Durr, Megan L; Jiang, Nancy

    2018-06-01

    To identify factors associated with online patient ratings and comments for a nationwide sample of otolaryngologists. Ratings, demographic information, and written comments were obtained for a random sample of otolaryngologists from HealthGrades.com and Vitals.com . Online Presence Score (OPS) was based on 10 criteria, including professional website and social media profiles. Regression analyses identified factors associated with increased rating. We evaluated for correlations between OPS and other attributes with star rating and used chi-square tests to evaluate content differences between positive and negative comments. On linear regression, increased OPS was associated with higher ratings on HealthGrades and Vitals; higher ratings were also associated with younger age on Vitals and less experience on HealthGrades. However, detailed correlation studies showed weak correlation between OPS and rating; age and graduation year also showed low correlation with ratings. Negative comments more likely focused on surgeon-independent factors or poor bedside manner. Though younger otolaryngologists with greater online presence tend to have higher ratings, weak correlations suggest that age and online presence have only a small impact on the content found on ratings websites. While most written comments are positive, deficiencies in bedside manner or other physician-independent factors tend to elicit negative comments.

  20. Multistate cohort models with proportional transfer rates

    DEFF Research Database (Denmark)

    Schoen, Robert; Canudas-Romo, Vladimir

    2006-01-01

    of transfer rates. The two living state case and hierarchical multistate models with any number of living states are analyzed in detail. Applying our approach to 1997 U.S. fertility data, we find that observed rates of parity progression are roughly proportional over age. Our proportional transfer rate...... approach provides trajectories by parity state and facilitates analyses of the implications of changes in parity rate levels and patterns. More women complete childbearing at parity 2 than at any other parity, and parity 2 would be the modal parity in models with total fertility rates (TFRs) of 1.40 to 2......We present a new, broadly applicable approach to summarizing the behavior of a cohort as it moves through a variety of statuses (or states). The approach is based on the assumption that all rates of transfer maintain a constant ratio to one another over age. We present closed-form expressions...

  1. Rising Long-term Interest Rates

    DEFF Research Database (Denmark)

    Hallett, Andrew Hughes

    Rather than chronicle recent developments in European long-term interest rates as such, this paper assesses the impact of increases in those interest rates on economic performance and inflation. That puts us in a position to evaluate the economic pressures for further rises in those rates......, the first question posed in this assignment, and the scope for overshooting (the second question), and then make some illustrative predictions of future interest rates in the euro area. We find a wide range of effects from rising interest rates, mostly small and mostly negative, focused on investment...... till the emerging European recovery is on a firmer basis and capable of overcoming increases in the cost of borrowing and shrinking fiscal space. There is also an implication that worries about rising/overshooting interest rates often reflect the fact that inflation risks are unequally distributed...

  2. Reaction rate of hydrolysis of iodine

    International Nuclear Information System (INIS)

    Miyake, Yoshikazu; Eguchi, Wataru; Adachi, Motonari

    1979-01-01

    Absorption rates of dilute iodine vapor contained in air by aqueous mixtures of sodium hydroxide and boric acid were measured using a laminar liquid jet column absorber at 298 K. Absorption rates in this system are controlled by a series of complex reactions taking place in the liquid phase. The reaction rate constant of iodine hydrolysis in the aqueous phase was determined from the absorption rates observed under the conditions that the base-catalytic hydrolysis reaction of iodine can be considered to be irreversible and that other reactions can be neglected. The absorption rates calculated theoretically with the rate constant value obtained above were in good accordance with the whole experimental data observed for a wide range of experimental conditions. (author)

  3. Modeling Real Exchange Rate Persistence in Chile

    Directory of Open Access Journals (Sweden)

    Leonardo Salazar

    2017-07-01

    Full Text Available The long and persistent swings in the real exchange rate have for a long time puzzled economists. Recent models built on imperfect knowledge economics seem to provide a theoretical explanation for this persistence. Empirical results, based on a cointegrated vector autoregressive (CVAR model, provide evidence of error-increasing behavior in prices and interest rates, which is consistent with the persistence observed in the data. The movements in the real exchange rate are compensated by movements in the interest rate spread, which restores the equilibrium in the product market when the real exchange rate moves away from its long-run benchmark value. Fluctuations in the copper price also explain the deviations of the real exchange rate from its long-run equilibrium value.

  4. Loading rates in California inferred from aftershocks

    Directory of Open Access Journals (Sweden)

    C. Narteau

    2008-03-01

    Full Text Available We estimate the loading rate in southern California and the change in stress induced by a transient slip event across the San Andreas fault (SAF system in central California, using a model of static fatigue. We analyze temporal properties of aftershocks in order to determine the time delay before the onset of the power law aftershock decay rate. In creep-slip and stick-slip zones, we show that the rate of change of this delay is related to seismic and aseismic deformation across the SAF system. Furthermore, we show that this rate of change is proportional to the deficit of slip rate along the SAF. This new relationship between geodetic and seismological data is in good agreement with predictions from a Limited Power Law model in which the evolution of the duration of a linear aftershock decay rate over short time results from variations in the load of the brittle upper crust.

  5. Evaluation of Straight and Swept Ramp Obstacles on Enhancing Deflagration-to-Detonation Transition in Pulse Detonation Engines

    Science.gov (United States)

    2006-12-01

    This led to the work of H. Le Chatelier and E. Mallard, who in 1883 conducted experiments to examine the detonation process more closely. Their work...describes the history of research into detonation and the principles that govern detonation theory. A. DETONATION HISTORY 1. Early Research in...these favorable properties and for a propulsion system and is a principle means of detonation initiation in pulse detonation engines. DDT refers to a

  6. Deflagration-to-detonation transition and detonation propagation in H{sub 2}-air mixtures with transverse concentration gradients

    Energy Technology Data Exchange (ETDEWEB)

    Boeck, Lorenz Rupprecht

    2015-06-11

    Explosion of H{sub 2}-air mixtures portrays a major hazard in nuclear reactors during severe loss-of-coolant accidents. Spatial gradients in H{sub 2} concentration prevail in real-world scenarios. Mixture inhomogeneity can lead to significantly stronger explosions as compared to homogeneous mixtures. The present work identifies and quantifies the underlying physical mechanisms.

  7. Assessment of thermal damage to polymeric materials by hydrogen deflagration in the Three Mile Island Unit 2 Reactor Building

    International Nuclear Information System (INIS)

    Alvares, N.J.

    1985-05-01

    Thermal damage to susceptible material in accessible regions of the reactor building was distributed in non-uniform patterns. No clear explanation for non-uniformity was found in examined evidence, e.g., burned materials were adjacent to materials that appear similar but were not burned. Because these items were in proximity to vertical openings that extend the height of the reactor building, we assume the unburned materials preferentially absorbed water vapor during periods of high, local steam concentration. Simple hydrogen-fire-exposure tests and heat transfer calculations duplicate the degree of damage found on inspected materials from the containment building. These data support estimated 8% pre-fire hydrogen concentration predictions based on various hydrogen production mechanisms

  8. The influence of vegetation cover and soil physical properties on deflagration of shallow landslides - Nova Friburgo, RJ / Brazil

    Science.gov (United States)

    de Oliveira Marques, Maria Clara; Silva, Roberta; Fraga, Joana; Luiza Coelho Netto, Ana; Mululo Sato, Anderson

    2017-04-01

    In 2011, the mountainous region of the State of Rio de Janeiro (Brazil) suffered enormous social and economic losses due to thousands of landslides caused by an extreme rainfall event. The mapping of the scars of these landslides in an area of 421 km2 in the municipality of Nova Friburgo, RJ - Brazil resulted in a total of 3622, and 89% of these scars were located in areas covered by grasses and forests. Despite the unexpected result (64% of scars in forest areas), field evidence has shown that most of the forest fragments in the municipality are in the initial stages of succession and in different states of degradation, evidencing the need for a better understanding of the role of these forests in the detonation and propagation of landslides. Two slope forest areas with different ages (20 and 50 years) were evaluated in relation to the vegetative aspects that influence the stability of the slopes in each area. Hydrological monitoring, including precipitation, interception by manual and automatic method, soil moisture and subsurface flows were performed in two different areas: forest and grass. Soil moisture was monitored by granular matrix sensors and flows by collecting troughs in trenches at depths of 0 cm, 20 cm, 50 cm, 100 cm, 150 cm and 220 cm, which were also analyzed for biomass and length of thick roots (> 2 mm diameter) and thin roots (particle size, aggregate stability, porosity and hydraulic conductivity in situ). In the grass area, the lower soil structure in relation to the forest areas makes it difficult to transmit the water through the soil matrix. During the monitoring period, that area preserved the moisture in depths of 100 cm, 150 cm and 220 cm. The fasciculate root system of the grasses increased the infiltration of water at the top of the soil, favouring the formation of more superficial saturation zones in the heavy rains, due to the hydraulic discontinuities. In forest areas, infiltration by preferential paths allows the concentration of water in the depths in which they are terminal increasing the pore water pressure. Soil saturation in this area also occurred in heavy rains, but more deeply due to the rapid movement and redirection of water in depth by tree roots. This process was also responsible for the higher subsurface flows found in the forest, that is, the greater aggregation of the soil, the existence of interconnected macropores, ducts and roots facilitate the transmission of water in depth. Associated with the high rainfall and high relative humidity, these vegetation favoured the formation of saturation zones and increased pore pressures of the water, causing landslides on lands between 0.5 m and 2.0 m. The results of hydraulic conductivity show that the difference (lateritic = 10-4 cm/s; saprolitic = 10-5 cm/s) between the layers of the soil can generate zones of hydraulic discontinuity in extreme rainfall events, which would justify the predominance of shallow translational landslides at these same depths.

  9. Calculation notes that support accident scenario and consequence of the in-tank fuel fire/deflagration

    Energy Technology Data Exchange (ETDEWEB)

    Crowe, R.D.

    1996-09-27

    The purpose of this calculation note is to provide the basis for In-Tank Fuel Fire/Deflageration consequence for the Tank Farm Safety Analysis Report (FSAR). Tank Fuel Fire/Deflageration scenario is developed and details and description of the analysis methods are provided.

  10. Deflagration-to-detonation transition and detonation propagation in H2-air mixtures with transverse concentration gradients

    International Nuclear Information System (INIS)

    Boeck, Lorenz Rupprecht

    2015-01-01

    Explosion of H 2 -air mixtures portrays a major hazard in nuclear reactors during severe loss-of-coolant accidents. Spatial gradients in H 2 concentration prevail in real-world scenarios. Mixture inhomogeneity can lead to significantly stronger explosions as compared to homogeneous mixtures. The present work identifies and quantifies the underlying physical mechanisms.

  11. Modeling inflation rates and exchange rates in Ghana: application of multivariate GARCH models.

    Science.gov (United States)

    Nortey, Ezekiel Nn; Ngoh, Delali D; Doku-Amponsah, Kwabena; Ofori-Boateng, Kenneth

    2015-01-01

    This paper was aimed at investigating the volatility and conditional relationship among inflation rates, exchange rates and interest rates as well as to construct a model using multivariate GARCH DCC and BEKK models using Ghana data from January 1990 to December 2013. The study revealed that the cumulative depreciation of the cedi to the US dollar from 1990 to 2013 is 7,010.2% and the yearly weighted depreciation of the cedi to the US dollar for the period is 20.4%. There was evidence that, the fact that inflation rate was stable, does not mean that exchange rates and interest rates are expected to be stable. Rather, when the cedi performs well on the forex, inflation rates and interest rates react positively and become stable in the long run. The BEKK model is robust to modelling and forecasting volatility of inflation rates, exchange rates and interest rates. The DCC model is robust to model the conditional and unconditional correlation among inflation rates, exchange rates and interest rates. The BEKK model, which forecasted high exchange rate volatility for the year 2014, is very robust for modelling the exchange rates in Ghana. The mean equation of the DCC model is also robust to forecast inflation rates in Ghana.

  12. Ethical principles for physician rating sites.

    Science.gov (United States)

    Strech, Daniel

    2011-12-06

    During the last 5 years, an ethical debate has emerged, often in public media, about the potential positive and negative effects of physician rating sites and whether physician rating sites created by insurance companies or government agencies are ethical in their current states. Due to the lack of direct evidence of physician rating sites' effects on physicians' performance, patient outcomes, or the public's trust in health care, most contributions refer to normative arguments, hypothetical effects, or indirect evidence. This paper aims, first, to structure the ethical debate about the basic concept of physician rating sites: allowing patients to rate, comment, and discuss physicians' performance, online and visible to everyone. Thus, it provides a more thorough and transparent starting point for further discussion and decision making on physician rating sites: what should physicians and health policy decision makers take into account when discussing the basic concept of physician rating sites and its possible implications on the physician-patient relationship? Second, it discusses where and how the preexisting evidence from the partly related field of public reporting of physician performance can serve as an indicator for specific needs of evaluative research in the field of physician rating sites. This paper defines the ethical principles of patient welfare, patient autonomy, physician welfare, and social justice in the context of physician rating sites. It also outlines basic conditions for a fair decision-making process concerning the implementation and regulation of physician rating sites, namely, transparency, justification, participation, minimization of conflicts of interest, and openness for revision. Besides other issues described in this paper, one trade-off presents a special challenge and will play an important role when deciding about more- or less-restrictive physician rating sites regulations: the potential psychological and financial harms for

  13. TRIP RATES FOR CONDOMINIUM CONSTRUCTION PROJECT

    Directory of Open Access Journals (Sweden)

    Wirach Hirun

    2015-01-01

    Full Text Available The number of large scale condominium construction projects had dramatically increased in Bangkok. Many projects had occurred in either densely populated areas or in central business districts, where traffic conditions were usually highly congested. To prevent traffic problems, a traffic impact study must be prepared and submitted for review by concerned public authorities. Unit trip generation rates were important data in traffic impact analysis. Without accurate unit trip generation rates, public agencies could not obtain accurate information on the traffic that will be generated. This study aimed to study trip rates and the factors affecting them for condominium construction project in Bangkok. The data were collected from 30 condominium construction sites located in 15 districts of Bangkok. The analysis used the linear regression method and was divided into three cases: 1 trip rates for all vehicles, 2 trip rates for classified vehicles, and 3 trip rates for all types of condominium. All case analyses considered weekdays, Saturday, and Sunday. The results found that trip rates related to the number of dwellings in the condominium. The trip rates for all vehicle types on weekdays, Saturday, and Sunday were 10.636, 4.647, and 9.294 vehicles per 100 dwelling units per day respectively. The trip rates for six-wheeled and ten-wheeled trucks on weekdays, Saturday, and Sunday were 2.046, 0.975, and 0.575 vehicles per 100 dwelling units per day respectively. The trip rate for four-wheeled trucks and passenger cars on weekdays was 1.960. Regarding condominium types, the trip rate for low rise condominiums for all vehicle types on weekdays was 5.315 while the trip rates for high rise condominiums for weekdays, Saturday, and Sunday were 3.965, 2.667, and 1.261 respectively.

  14. Sparseness and Roughness of Foreign Exchange Rates

    Science.gov (United States)

    Vandewalle, N.; Ausloos, M.

    An accurate multiaffine analysis of 23 foreign currency exchange rates has been performed. The roughness exponent H1 which characterizes the excursion of the exchange rate has been numerically measured. The degree of intermittency C1 has been also estimated. In the (H1,C1) phase diagram, the currency exchange rates are dispersed in a wide region around the Brownian motion value (H1=0.5,C1=0) and have a significantly intermittent component (C1≠0).

  15. The Determinants of Country Risk Ratings

    OpenAIRE

    Jean-Claude Cosset; Jean Roy

    1991-01-01

    The purpose of this paper is to replicate Euromoney's and Institutional Investor's country risk ratings on the basis of economic and political variables. The evidence reveals that country risk ratings respond to some of the variables suggested by the theory. In particular, both the level of per capita income and propensity to invest affect positively the rating of a country. In addition, high-ranking countries are less indebted than low-ranking countries. It also appears that the ability of t...

  16. The Alchemy of CDO Credit Ratings

    OpenAIRE

    Efraim Benmelech; Jennifer Dlugosz

    2009-01-01

    Collateralized Loan Obligations (CLOs) were one of the largest and fastest growing segments of the structured finance market, fueling the 2003-2007 boom in syndicated loans and leveraged buyouts. The credit crisis brought CLO issuance to a halt, and as a result the leveraged loan market dried up. Similar to other structured finance products, investors in CLOs rely heavily on credit rating provided by the rating agencies, yet little is known about CLO rating practices. This paper attempts to f...

  17. Growth rate, population entropy, and perturbation theory.

    OpenAIRE

    Demetrius, L.

    1989-01-01

    This paper is concerned with the connection between two classes of population variables: measures of population growth rate—the Malthusian parameter, the net reproduction rate, the gross reproduction rate, and the mean life expectancy; and measures of demographic heterogeneity—population entropy. It is shown that the entropy functions predict the response of the growth rate parameters to perturbations in the age-specific fecundity and mortality schedule. These results are invoked to introduce...

  18. Dose rate constants for new dose quantities

    International Nuclear Information System (INIS)

    Tschurlovits, M.; Daverda, G.; Leitner, A.

    1992-01-01

    Conceptual changes and new quantities made is necessary to reassess dose rate quantities. Calculations of the dose rate constant were done for air kerma, ambient dose equivalent and directional dose equivalent. The number of radionuclides is more than 200. The threshold energy is selected as 20 keV for the dose equivalent constants. The dose rate constant for the photon equivalent dose as used mainly in German speaking countries as a temporary quantity is also included. (Author)

  19. A new assessment of floating exchange rates

    OpenAIRE

    Waimann, D. R.

    1981-01-01

    The switch to floating exchange rates during the 1970s has given economists the first comprehensive opportunity to assess the arguments for and against floating. Much new work has been done on various aspects of floating exchange rate behaviour. This article attempts a limited survey of the evidence concerning two important issues—whether floating exchange rates are inherently unstable and whether they harm international trade.

  20. Fear of Floating: Exchange Rate Flexibility Indices

    OpenAIRE

    Reinhart, Carmen

    2001-01-01

    Many emerging market countries have suffered financial crises. One view blames soft pegs for these crises. Adherents to that view suggest that countries move to corner solutions--hard pegs or floating exchange rates. We analyze the behavior of exchange rates, reserves, and interest rates to assess whether there is evidence that country practice is moving toward corner solutions. We focus on whether countries that claim they are floating are indeed doing so. We find that countries that say th...

  1. China; Sources of Real Exchange Rate Fluctuations

    OpenAIRE

    Tao Wang

    2004-01-01

    This paper reviews the evolution of China's real effective exchange rate between 1980 and 2002, and uses a structural vector autoregression model to study the relative importance of different types of macroeconomic shocks for fluctuations in the real exchange rate. The structural decomposition shows that relative real demand and supply shocks account for most of the variations in real exchange rate changes during the estimation period. The paper also finds that supply shocks are as important ...

  2. Inventory Investment and the Real Interest Rate

    OpenAIRE

    Junayed, Sadaquat; Khan, Hashmat

    2009-01-01

    The relationship between inventory investment and the real interest rate has been difficult to assess empirically. Recent work has proposed a linear-quadratic inventory model with time-varying discount factor to identify the effects of the real interest rate on inventory investment. The authors show that this framework does not separately identify the effects of real interest rate on inventory investment from variables that determine the expected marginal cost of production. In other words, t...

  3. Parents rate the ratings: a test of the validity of the American movie, television, and video game ratings.

    Science.gov (United States)

    Walsh, D A; Gentile, D A; Van Brederode, T M

    2002-02-01

    Numerous studies have documented the potential effects on young audiences of violent content in media products, including movies, television programs, and computer and video games. Similar studies have evaluated the effects associated with sexual content and messages. Cumulatively, these effects represent a significant public health risk for increased aggressive and violent behavior, spread of sexually transmitted diseases, and pediatric pregnancy. In partial response to these risks and to public and legislative pressure, the movie, television, and gaming industries have implemented ratings systems intended to provide information about the content and appropriate audiences for different films, shows, and games. We conducted a panel study to test the validity of the current movie, television, and video game rating systems. Participants used the KidScore media evaluation tool, which evaluates films, television shows, and video and computer games on 10 aspects, including the appropriateness of the media product for children on the basis of age. Results revealed that when an entertainment industry rates a product as inappropriate for children, parent raters agree that it is inappropriate for children. However, parent raters disagree with industry usage of many of the ratings designating material suitable for children of different ages. Products rated as appropriate for adolescents are of the greatest concern. The level of disagreement varies from industry to industry and even from rating to rating. Analysis indicates that the amount of violent content and portrayals of violence are the primary markers for disagreement between parent raters and industry ratings. Short-term and long-term recommendations are suggested.

  4. Rate Control Efficacy in Permanent Atrial Fibrillation : Successful and Failed Strict Rate Control Against a Background of Lenient Rate Control

    NARCIS (Netherlands)

    Groenveld, Hessel F.; Tijssen, Jan G. P.; Crijns, Harry J. G. M.; Van den Berg, Maarten P.; Hillege, Hans L.; Alings, Marco; Van Veldhuisen, Dirk J.; Van Gelder, Isabelle C.

    2013-01-01

    Objectives This study sought to investigate differences in outcome between patients treated with successful strict, failed strict, and lenient rate control. Background The RACE II (Rate Control Efficacy in Permanent Atrial Fibrillation) study showed no difference in outcome between lenient and

  5. Dose rate visualization of radioisotope thermoelectric generators

    International Nuclear Information System (INIS)

    Schwarz, R.A.; Kessler, S.F.; Tomaszewski, T.A.

    1995-09-01

    Advanced visualization techniques can be used to investigate gamma ray and neutron dose rates around complex dose rate intensive operations. A method has been developed where thousands of dose points are calculated using the MCNP(Monte Carlo N-Particle) computer code and then displayed to create color contour plots of the dose rate for complex geometries. Once these contour plots are created, they are sequenced together creating an animation to dynamically show how the dose rate changes with changes in the geometry or source over time

  6. Credit Ratings Failures and Policy Options

    OpenAIRE

    Marco Pagano; Paolo Volpin

    2009-01-01

    This paper examines the role of credit rating agencies in the subprime crisis that triggered the 2007-2008 financial turmoil. We focus on two aspects of ratings that contributed to the boom and bust of the market for structured debt: rating inflation and coarse information disclosure. The paper discusses how regulation can be designed to mitigate these problems in the future. Our preferred policy is to require rating agencies to be paid by investors rather than by issuers and to grant open an...

  7. 15 CFR 700.11 - Priority ratings.

    Science.gov (United States)

    2010-01-01

    ... OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700.11 Priority ratings. (a) Levels of...

  8. Rate in template-directed polymer synthesis.

    Science.gov (United States)

    Saito, Takuya

    2014-06-01

    We discuss the temporal efficiency of template-directed polymer synthesis, such as DNA replication and transcription, under a given template string. To weigh the synthesis speed and accuracy on the same scale, we propose a template-directed synthesis (TDS) rate, which contains an expression analogous to that for the Shannon entropy. Increasing the synthesis speed accelerates the TDS rate, but the TDS rate is lowered if the produced sequences are diversified. We apply the TDS rate to some production system models and investigate how the balance between the speed and the accuracy is affected by changes in the system conditions.

  9. Photovoltaic Degradation Rates -- An Analytical Review

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, D. C.; Kurtz, S. R.

    2012-06-01

    As photovoltaic penetration of the power grid increases, accurate predictions of return on investment require accurate prediction of decreased power output over time. Degradation rates must be known in order to predict power delivery. This article reviews degradation rates of flat-plate terrestrial modules and systems reported in published literature from field testing throughout the last 40 years. Nearly 2000 degradation rates, measured on individual modules or entire systems, have been assembled from the literature, showing a median value of 0.5%/year. The review consists of three parts: a brief historical outline, an analytical summary of degradation rates, and a detailed bibliography partitioned by technology.

  10. Dose rate visualization of radioisotope thermoelectric generators

    International Nuclear Information System (INIS)

    Schwarz, R.A.; Kessler, S.F.; Tomaszewski, T.A.

    1996-01-01

    Advanced visualization techniques can be used to investigate gamma ray and neutron dose rates around complex dose rate intensive operations. A method has been developed where thousands of dose points are calculated using the MCNP (Monte Carlo N-Particle) computer code (Briesmeister 1993) and then displayed to create color contour plots of the dose rate for complex geometries. Once these contour plots are created, they are sequenced together creating an animation to dynamically show how the dose rate changes with changes in the geometry or source over time. copyright 1996 American Institute of Physics

  11. Exchange Rate Pass-Through in Turkey

    OpenAIRE

    Marco Rossi; Daniel Leigh

    2002-01-01

    In light of the strong correlation between exchange rate movements and domestic prices in Turkey, it is important to assess the impact of the exchange rate on domestic prices, in particular as Turkey moves to an inflation targeting regime. This paper uses a recursive vector autoregression model to investigate the impact of exchange rate movements on prices in Turkey. We find that (i) the impact of the exchange rate on prices is over after about a year, but is mostly felt in the first four mon...

  12. Remarks on Interest Rate Risk Management

    Directory of Open Access Journals (Sweden)

    Elena-Violeta DRAGOI

    2016-12-01

    Full Text Available Bank interest and interest rate risk management is a contemporary subject and for socio-economic environment of Romania cause serious consequences in the level of economic development. The purpose of this research is to highlight the main indicator that measures the total cost of a loan, namely the annual percentage rate (APR, because if we refer to an interest rate lower, at first glance that loan seems more advantageous, but at a closer look, taking into account the commissions charged by the bank, we see that the loan is more expensive compared to another, whose interest rate is higher.

  13. Affinity functions for modeling glass dissolution rates

    Energy Technology Data Exchange (ETDEWEB)

    Bourcier, W.L. [Lawrence Livermore National Lab., CA (United States)

    1997-07-01

    Glass dissolution rates decrease dramatically as glass approach ''saturation'' with respect to the leachate solution. Most repository sites are chosen where water fluxes are minimal, and therefore the waste glass is most likely to dissolve under conditions close to ''saturation''. The key term in the rate expression used to predict glass dissolution rates close to ''saturation'' is the affinity term, which accounts for saturation effects on dissolution rates. Interpretations of recent experimental data on the dissolution behaviour of silicate glasses and silicate minerals indicate the following: 1) simple affinity control does not explain the observed dissolution rate for silicate minerals or glasses; 2) dissolution rates can be significantly modified by dissolved cations even under conditions far from saturation where the affinity term is near unity; 3) the effects of dissolved species such as Al and Si on the dissolution rate vary with pH, temperature, and saturation state; and 4) as temperature is increased, the effect of both pH and temperature on glass and mineral dissolution rates decrease, which strongly suggests a switch in rate control from surface reaction-based to diffusion control. Borosilicate glass dissolution models need to be upgraded to account for these recent experimental observations. (A.C.)

  14. Mortality rates among Arab Americans in Michigan.

    Science.gov (United States)

    Dallo, Florence J; Schwartz, Kendra; Ruterbusch, Julie J; Booza, Jason; Williams, David R

    2012-04-01

    The objectives of this study were to: (1) calculate age-specific and age-adjusted cause-specific mortality rates for Arab Americans; and (2) compare these rates with those for blacks and whites. Mortality rates were estimated using Michigan death certificate data, an Arab surname and first name list, and 2000 U.S. Census data. Age-specific rates, age-adjusted all-cause and cause-specific rates were calculated. Arab Americans (75+) had higher mortality rates than whites and blacks. Among men, all-cause and cause-specific mortality rates for Arab Americans were in the range of whites and blacks. However, Arab American men had lower mortality rates from cancer and chronic lower respiratory disease compared to both whites and blacks. Among women, Arab Americans had lower mortality rates from heart disease, cancer, stroke, and diabetes than whites and blacks. Arab Americans are growing in number. Future study should focus on designing rigorous separate analyses for this population.

  15. The determinants of exchange rate in Croatia

    Directory of Open Access Journals (Sweden)

    Manuel BENAZIC

    2016-06-01

    Full Text Available The dilemma for every country with an independent monetary policy is which kind of exchange rate arrangement should be applied. Through the exchange rate policy, countries can influence their economies, i.e. price stability and export competiveness. Croatia is a new EU member state, it has its own monetary policy and currency but it is on the way to euro introduction. Regarding the experiences from the beginning of the 1990s when Croatia was faced with serious monetary instabilities and hyperinflation, the goal of Croatian National Bank (CNB is to ensure price stability and one way to do so is through exchange rate policy. Croatia, as a small and open economy, has applied a managed floating exchange rate regime. The exchange rate is determined primarily by the foreign exchange supply and demand on the foreign exchange market, with occasional market interventions by the CNB. Therefore, in order to maintain exchange rate stability, policymakers must be able to recognize how changes in these factors affect changes in the exchange rate. This research aims to find a relationship among the main sources of foreign currency inflow and outflow and the level of exchange rate in Croatia. The analysis is carried out by using the bounds testing (ARDL approach for co-integration. The results indicate the existence of a stable co-integration relationship between the observed variables, whereby an increase in the majority of variables leads to an exchange rate appreciation.

  16. Heating and cooling rates and their effects upon heart rate in the ...

    African Journals Online (AJOL)

    The heating and cooling rates of adult Chersina angulata were investigated to ascertain whether these tortoises can physiologically alter their rates of heat exchange. In addition, heart rates were recorded to provide an insight into the control of heat exchange. C. angulata heats significantly faster than it cools. Heart rates ...

  17. Interest Rate Rules, Exchange Market Pressure, and Successful Exchange Rate Management

    NARCIS (Netherlands)

    Klaassen, F.; Mavromatis, K.

    2016-01-01

    Central banks with an exchange rate objective set the interest rate in response to what they call ''pressure.'' Instead, existing interest rate rules rely on the exchange rate minus its target. To stay closer to actual policy, we introduce a rule that uses exchange market pressure (EMP), the

  18. Do Predation Rates on Artificial Nests Accurately Reflect Predation Rates on Natural Bird Nests?

    Science.gov (United States)

    David I. King; Richard M. DeGraaf; Curtice R. Griffin; Thomas J. Maier

    1999-01-01

    Artificial nests are widely used in avian field studies. However, it is unclear how well predation rates on artificial nests reflect predation rates on natural nests. Therefore, we compared survival rates of artificial nests (unused natural nests baited with House Sparrow eggs) with survival rates of active bird nests in the same habitat at the same sites. Survival...

  19. The Impact of the Rating Agencies' Through-the-cycle Methodology on Rating Dynamics

    NARCIS (Netherlands)

    Altman, E.I.; Rijken, H.A.

    2005-01-01

    Surveys on the use of agency credit ratings reveal that some investors believe that credit-rating agencies are relatively slow in adjusting their ratings. A well-accepted explanation for this perception on rating timeliness is the through-the-cycle methodology that agencies use. Through-the-cycle

  20. A Longitudinal Examination of Rater and Ratee Effects in Performance Ratings.

    Science.gov (United States)

    Vance, Robert J.; And Others

    1983-01-01

    Investigated the consistency and loci of leniency, halo, and range restriction effects in performance ratings in a longitudinal study. Policy supervisors (N=90) rated 350 subordinates on five occasions. Concluded that reliable variance in mean ratings is partly attributable to ratees, but mainly introduced by raters. (JAC)

  1. Rate of ice accumulation during ice storms

    Energy Technology Data Exchange (ETDEWEB)

    Feknous, N. [SNC-Lavalin, Montreal, PQ (Canada); Chouinard, L. [McGill Univ., Montreal, PQ (Canada); Sabourin, G. [Hydro-Quebec, Montreal, PQ (Canada)

    2005-07-01

    The rate of glaze ice accumulation is the result of a complex process dependent on numerous meteorological and physical factors. The aim of this paper was to estimate the distribution rate of glaze ice accumulation on conductors in southern Quebec for use in the design of mechanical and electrical de-icing devices. The analysis was based on direct observations of ice accumulation collected on passive ice meters. The historical database of Hydro-Quebec, which contains observations at over 140 stations over period of 25 years, was used to compute accumulation rates. Data was processed so that each glaze ice event was numbered in a chronological sequence. Each event consisted of the time series of ice accumulations on each of the 8 cylinders of the ice meters, as well as on 5 of its surfaces. Observed rates were converted to represent the average ice on a 30 mm diameter conductor at 30 m above ground with a span of 300 m. Observations were corrected to account for the water content of the glaze ice as evidenced by the presence of icicles. Results indicated that despite significant spatial variations in the expected severity of ice storms as a function of location, the distribution function for rates of accumulation were fairly similar and could be assumed to be independent of location. It was concluded that the observations from several sites could be combined in order to obtain better estimates of the distribution of hourly rates of ice accumulation. However, the rates were highly variable. For de-icing strategies, it was suggested that average accumulation rates over 12 hour periods were preferable, and that analyses should be performed for other time intervals to account for the variability in ice accumulation rates over time. In addition, accumulation rates did not appear to be highly correlated with average wind speed for maximum hourly accumulation rates. 3 refs., 2 tabs., 10 figs.

  2. The Effects of Gun Ownership Rates and Gun Control Laws on Suicide Rates

    OpenAIRE

    Mark Gius

    2011-01-01

    The purpose of the present study is to determine the effects of gun control laws and gun ownership rates on state-level suicide rates. Using the most recent data on suicide rates, gun control measures, and gun ownership rates, the results of the present study suggest that states that require handgun permits have lower gun-related suicide rates, and states that have higher gun ownership rates have higher gun-related suicide rates. Regarding non-gun suicides, results suggest that stricter gun c...

  3. 31 CFR 359.14 - How are composite rates determined?

    Science.gov (United States)

    2010-07-01

    ... composite interest rates.): Composite rate = {(Fixed rate ÷ 2) + Semiannual inflation rate + [Semiannual inflation rate × (Fixed rate ÷ 2)]} × 2. 2 2 Example for I bonds issued May 2002-October 2002: Fixed rate = 2.00% Inflation rate = 0.28% Composite rate = [0.0200 ÷ 2 + 0.0028 + (0.0028 × 0.0200 ÷ 2)] ×2...

  4. Provider-Initiated Patient Satisfaction Reporting Yields Improved Physician Ratings Relative to Online Rating Websites.

    Science.gov (United States)

    Ricciardi, Benjamin F; Waddell, Brad S; Nodzo, Scott R; Lange, Jeffrey; Nocon, Allina A; Amundsen, Spencer; Tarity, T David; McLawhorn, Alexander S

    2017-09-01

    Recently, providers have begun to publicly report the results of patient satisfaction surveys from their practices. However, these outcomes have never been compared with the findings of commercial online physician rating websites. The goals of the current study were to (1) compare overall patient satisfaction ratings for orthopedic surgeons derived from provider-based third-party surveys with existing commercial physician rating websites and (2) determine the association between patient ratings and provider characteristics. The authors identified 12 institutions that provided publicly available patient satisfaction outcomes derived from third-party surveys for their orthopedic surgeons as of August 2016. Orthopedic surgeons at these institutions were eligible for inclusion (N=340 surgeons). Provider characteristics were recorded from publicly available data. Four high-traffic commercial online physician rating websites were identified: Healthgrades.com, UCompareHealthCare.com, Vitals.com, and RateMDs.com. For each surgeon, overall ratings (on a scale of 1-5), total number of ratings, and percentage of negative ratings were compared between provider-initiated internal ratings and each commercial online website. Associations between baseline factors and overall physician ratings and negative ratings were assessed. Provider-initiated internal patient satisfaction ratings showed a greater number of overall patient ratings, higher overall patient satisfaction ratings, and a lower percentage of negative comments compared with commercial online physician rating websites. A greater number of years in practice had a weak association with lower internal ratings, and an academic practice setting and a location in the Northeast were protective factors for negative physician ratings. Compared with commercial online physician rating websites, provider-initiated patient satisfaction ratings of orthopedic surgeons appear to be more favorable, with greater numbers of responses

  5. Influence of Gas Flow Rate on the Deposition Rate on Stainless Steel 202 Substrates

    OpenAIRE

    M.A. Chowdhury; D.M. Nuruzzaman

    2012-01-01

    Solid thin films have been deposited on stainless steel 202 (SS 202) substrates at different flow rates of natural gas using a hot filament thermal chemical vapor deposition (CVD) reactor. In the experiments, the variations of thin film deposition rate with the variation of gas flow rate have been investigated. The effects of gap between activation heater and substrate on the deposition rate have also been observed. Results show that deposition rate on SS 202 increases with the increase in g...

  6. Choice of exchange rate regimes for African countries: Fixed or Flexible Exchange rate regimes?

    OpenAIRE

    Simwaka, Kisu

    2010-01-01

    The choice of an appropriate exchange rate regime has been a subject of ongoing debate in international economics. The majority of African countries are small open economies and thus where the choice of the exchange rate regime is an important policy issue. Aside from factors such as interest rates and inflation, the exchange rate is one of the most important determinants of a country’s relative level of economic health. For this reason, exchange rates are among the most watched analyzed and ...

  7. Interest Rates and Exchange Rate Relationship in BRIC-T Countries

    OpenAIRE

    Selim KAYHAN; Tayfur BAYAT; Ahmet UGUR

    2013-01-01

    This study examines the dynamic relationships between the real exchange rate and the real interest rate in the BRIC-T (Brazil, Russia, India, China and Turkey) countries by employing monthly data from the beginning of flexible exchange rate regime to July 2011. For this aim, non-linear causality test and frequency domain causality test approaches are used. According to frequency domain causality test results, interest rate affects exchange rate in only China and this effect exist only in the ...

  8. Exchange rate behavior with negative interest rates: Some early negative observations

    OpenAIRE

    Hameed, Allaudeen S.; Rose, Andrew

    2017-01-01

    This paper examines exchange rate behavior during the recent period with negative nominal interest rates. We use a daily panel of data on 61 currencies from January 2010 through May 2016, during which five economies - Denmark, the European Economic and Monetary Union, Japan, Sweden, and Switzerland - experienced negative nominal interest rates. We examine both effective exchange rates and bilateral rates; the latter typically measured against the Swiss franc since Switzerland has had the long...

  9. Rate Control for MPEG-4 Bit Stream

    Institute of Scientific and Technical Information of China (English)

    王振洲; 李桂苓

    2003-01-01

    For a very long time video processing dealt exclusively with fixed-rate sequences of rectangular shaped images. However, interest has been recently moving toward a more flexible concept in which the subject of the processing and encoding operations is a set of visual elements organized in both time and space in a flexible and arbitrarily complex way. The moving picture experts group (MPEG-4) standard supports this concept and its verification model (VM) encoder has adopted scalable rate control (SRC) as the rate control scheme, which is based on the spatial domain and compatible with constant bit rate (CBR) and variable bit rate (VBR). In this paper,a new rate control algorithm based on the DCT domain instead of the pixel domain is presented. More-over, macroblock level rate control scheme to compute the quantization step for each macroblock has been adopted. The experimental results show that the new algorithm can achieve a much better result than the original one in both peak signal-to-noise ratio (PSNR) and the coding bits, and that the new algorithm is more flexible than test model 5 (TM5) rate control algorithm.

  10. Pushing the Envelope on Rate Design

    International Nuclear Information System (INIS)

    Faruqui, Ahmad; George, Stephen S.

    2006-01-01

    A new crop of rate cases provides a unique window of opportunity to rationalize rate designs so that they more accurately reflect the underlying economics of electricity supply, so that prices are more easily understood by customers, and so that they provide more accurate and cost-effective incentives for energy efficiency and demand response. (author)

  11. Natural and anthropogenic rates of soil erosion

    Science.gov (United States)

    Regions of land that are brought into crop production from native vegetation typically undergo a period of soil erosion instability, and long term erosion rates are greater than for natural lands as long as the land continues being used for crop production. Average rates of soil erosion under natur...

  12. Rules versus Discretion in Loan Rate Setting

    NARCIS (Netherlands)

    Cerqueiro, G.M.; Degryse, H.A.; Ongena, S.

    2007-01-01

    We propose a heteroscedastic regression model to identify the determinants of the dispersion in interest rates on loans granted to small and medium sized enterprises. We interpret unexplained deviations as evidence of the banks’ discretionary use of market power in the loan rate setting process.

  13. The tail index of exchange rate returns

    NARCIS (Netherlands)

    C.G. Koedijk (Kees); M. Schafgans (Marcia); C.G. de Vries (Casper)

    1990-01-01

    textabstractIn the literature on the empirical distribution of foreign exchange rates there is now consensus that exchange rate yields are fat-tailed. Three problems, however, persist: (1) Which class of distribution functions is most appropriate? (2) Are the parameters of the distribution invariant

  14. Model Uncertainty and Exchange Rate Forecasting

    NARCIS (Netherlands)

    R.R.P. Kouwenberg (Roy); A. Markiewicz (Agnieszka); R. Verhoeks (Ralph); R.C.J. Zwinkels (Remco)

    2013-01-01

    textabstractWe propose a theoretical framework of exchange rate behavior where investors focus on a subset of economic fundamentals. We find that any adjustment in the set of predictors used by investors leads to changes in the relation between the exchange rate and fundamentals. We test the

  15. Size and support ratings of US banks

    NARCIS (Netherlands)

    Poghosyan, Tigran; Werger, Charlotte; de Haan, Jakob

    We examine whether Fitch support ratings of US banks depend on bank size. Using quarterly data for the period 2004:Q4 to 2012:Q4 and controlling for several factors that make large and small banks different, we find that bank size is positively related to support ratings. However, the effect is

  16. Economic and accounting rates of return

    NARCIS (Netherlands)

    Feenstra, D.W.; Wang, H.

    2000-01-01

    The rate of return on invested capital is a central concept in financial analysis. The purpose of calculating the rate of return on investment in general is to measure the financial performance, to assess the desirability of a project and to make decisions on the valuation of firms. Financial

  17. 42 CFR 21.45 - Rating values.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Rating values. 21.45 Section 21.45 Public Health... Appointment § 21.45 Rating values. The examination of every candidate for appointment to any grade in the... values for each part of the examination as are prescribed by the Surgeon General. No candidate who...

  18. Recombination rate plasticity: revealing mechanisms by design

    Science.gov (United States)

    Sefick, Stephen; Rushton, Chase

    2017-01-01

    For over a century, scientists have known that meiotic recombination rates can vary considerably among individuals, and that environmental conditions can modify recombination rates relative to the background. A variety of external and intrinsic factors such as temperature, age, sex and starvation can elicit ‘plastic’ responses in recombination rate. The influence of recombination rate plasticity on genetic diversity of the next generation has interesting and important implications for how populations evolve. Further, many questions remain regarding the mechanisms and molecular processes that contribute to recombination rate plasticity. Here, we review 100 years of experimental work on recombination rate plasticity conducted in Drosophila melanogaster. We categorize this work into four major classes of experimental designs, which we describe via classic studies in D. melanogaster. Based on these studies, we highlight molecular mechanisms that are supported by experimental results and relate these findings to studies in other systems. We synthesize lessons learned from this model system into experimental guidelines for using recent advances in genotyping technologies, to study recombination rate plasticity in non-model organisms. Specifically, we recommend (1) using fine-scale genome-wide markers, (2) collecting time-course data, (3) including crossover distribution measurements, and (4) using mixed effects models to analyse results. To illustrate this approach, we present an application adhering to these guidelines from empirical work we conducted in Drosophila pseudoobscura. This article is part of the themed issue ‘Evolutionary causes and consequences of recombination rate variation in sexual organisms’. PMID:29109222

  19. Rate Control in Dual Source Evaporation

    NARCIS (Netherlands)

    Wielinga, T.; Gruisinga, W.; Leeuwis, H.; Lodder, J.C.; van Weers, J.F.; Wilmans, J.C.

    1980-01-01

    Two-component thin films are deposited in a high-vacuum system from two close sources, heated by an electron beam which is deflected between them. By using quartz-crystal monitors the evaporation rates are measured seperately, which is usually considered to be problematical. One rate signal is used

  20. 9 CFR 592.530 - Holiday rate.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Holiday rate. 592.530 Section 592.530... INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Fees and Charges § 592.530 Holiday rate. When an official plant requires inspection service on a holiday or a day designated in lieu of a holiday, such service is...

  1. Rules versus discretion in loan rate setting

    NARCIS (Netherlands)

    Cerqueiro, G.M.; Degryse, H.A.; Ongena, S.

    2011-01-01

    Loan rates for seemingly identical borrowers often exhibit substantial dispersion. This paper investigates the determinants of the dispersion in interest rates on loans granted by banks to small and medium sized enterprises. We associate this dispersion with the loan officers’ use of “discretion” in

  2. Measuring heart rate with optical sensor

    NARCIS (Netherlands)

    Barachi, M. (Mitra)

    2014-01-01

    The problem addressed in this report is to verify the possibility of using an optical sensor in the SaxShirt in order to extract the heart rate. There are specifically three questions that we try to address. 1) How is it possible to extract heart rate (BPM) from the optical sensor? 2) Is it

  3. Market penetration rates of new energy technologies

    International Nuclear Information System (INIS)

    Lund, Peter

    2006-01-01

    The market penetration rates of 11 different new energy technologies were studied covering energy production and end-use technologies. The penetration rates were determined by fitting observed market data to an epidemical diffusion model. The analyses show that the exponential penetration rates of new energy technologies may vary from 4 up to over 40%/yr. The corresponding take-over times from a 1% to 50% share of the estimated market potential may vary from less than 10 to 70 years. The lower rate is often associated with larger energy impacts. Short take-over times less than 25 years seem to be mainly associated with end-use technologies. Public policies and subsides have an important effect on the penetration. Some technologies penetrate fast without major support explained by technology maturity and competitive prices, e.g. compact fluorescent lamps show a 24.2%/yr growth rate globally. The penetration rates determined exhibit some uncertainty as penetration has not always proceeded close to saturation. The study indicates a decreasing penetration rate with increasing time or market share. If the market history is short, a temporally decreasing functional form for the penetration rate coefficient could be used to anticipate the probable behavior

  4. Persistent Ratee Contaminants in Performance Appraisal.

    Science.gov (United States)

    Van Fleet, David D.; Chamberlain, Howard

    The hypothesis that conventional approaches to evaluating contaminants in performance appraisal overlook important individual ratee effects was examined. A rating form was developed that consisted of the following dimensions and behaviors: warmth; guided discourse or indirect teaching methods; control of subject matter; enthusiasm and reinforcing;…

  5. 77 FR 36536 - Examination Rating System

    Science.gov (United States)

    2012-06-19

    ... operations of the Bank System's Office of Finance, ratings were assigned only to the areas of Corporate... FEDERAL HOUSING FINANCE AGENCY [No. 2012-N-06] Examination Rating System AGENCY: Federal Housing Finance Agency. ACTION: Notice with request for comments. SUMMARY: The Federal Housing Finance Agency...

  6. High-rate lithium thionyl chloride cells

    Science.gov (United States)

    Goebel, F.

    1982-03-01

    A high-rate C cell with disc electrodes was developed to demonstrate current rates which are comparable to other primary systems. The tests performed established the limits of abuse beyond which the cell becomes hazardous. Tests include: impact, shock, and vibration tests; temperature cycling; and salt water immersion of fresh cells.

  7. Model Uncertainty and Exchange Rate Forecasting

    NARCIS (Netherlands)

    Kouwenberg, R.; Markiewicz, A.; Verhoeks, R.; Zwinkels, R.C.J.

    2017-01-01

    Exchange rate models with uncertain and incomplete information predict that investors focus on a small set of fundamentals that changes frequently over time. We design a model selection rule that captures the current set of fundamentals that best predicts the exchange rate. Out-of-sample tests show

  8. Peak heart rates at extreme altitudes

    DEFF Research Database (Denmark)

    Lundby, C; Van Hall, Gerrit

    2001-01-01

    We have measured maximal heart rate during a graded maximal bicycle exercise test to exhaustion in five healthy climbers before and during an expedition to Mt. Everest. Maximal heart rates at sea level were 186 (177-204) beats/min(-1) at sea level and 170 (169-182) beats/min(-1) with acute hypoxi...

  9. Machine rates for selected forest harvesting machines

    Science.gov (United States)

    R.W. Brinker; J. Kinard; Robert Rummer; B. Lanford

    2002-01-01

    Very little new literature has been published on the subject of machine rates and machine cost analysis since 1989 when the Alabama Agricultural Experiment Station Circular 296, Machine Rates for Selected Forest Harvesting Machines, was originally published. Many machines discussed in the original publication have undergone substantial changes in various aspects, not...

  10. Tiebreaker: Certification and Multiple Credit Ratings

    NARCIS (Netherlands)

    D.G.J. Bongaerts (Dion); K.J.M. Cremers (Martijn); W.N. Goetzmann (William)

    2008-01-01

    textabstractAbstract: This paper explores the role played by multiple credit rating agencies (CRAs) in the market for corporate bonds. Moody’s, S&P and Fitch operate in a competitive setting with market demand for both credit information and the certification value of a high rating. We

  11. Tiebreaker: Certification and multiple credit ratings

    NARCIS (Netherlands)

    Bongaerts, D.; Cremers, K.J.M.; Goetzmann, W.

    2009-01-01

    This paper explores the role played by multiple credit rating agencies (CRAs) in the market for corporate bonds. Moody’s, S&P and Fitch operate in a competitive setting with market demand for both credit information and the certification value of a high rating. We empirically document the outcome of

  12. 75 FR 27375 - Postal Rate Case Management

    Science.gov (United States)

    2010-05-14

    ... POSTAL REGULATORY COMMISSION [Docket No. PI2010-3; Order No. 456] Postal Rate Case Management AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is seeking comments relevant to management of an anticipated exigent postal rate case. It has scheduled a technical conference...

  13. [Resonance hypothesis of heart rate variability origin].

    Science.gov (United States)

    Sheĭkh-Zade, Iu R; Mukhambetaliev, G Kh; Cherednik, I L

    2009-09-01

    A hypothesis is advanced of the heart rate variability being subjected to beat-to-beat regulation of cardiac cycle duration in order to ensure the resonance interaction between respiratory and own fluctuation of the arterial system volume for minimization of power expenses of cardiorespiratory system. Myogenic, parasympathetic and sympathetic machanisms of heart rate variability are described.

  14. Confronting the Graduation Rate Crisis in Texas

    Science.gov (United States)

    Losen, Daniel; Orfield, Gary; Balfanz, Robert

    2006-01-01

    The most accurate method for tracking high school graduation rates is to provide each student with a single lifetime school identification number that would follow him or her throughout his or her entire school career. Texas has this system in place, but this report demonstrates that the official rates Texas has historically reported dramatically…

  15. Regional labour market research on participation rates

    NARCIS (Netherlands)

    Elhorst, J.P.

    1996-01-01

    This article reviews the methodology of 17 empirical studies in which the participation rate has been estimated with the help of regional data. After defining and pointing our the orientation of regional labour market research on participation rates, three methodological issues dominate the

  16. Rate-cost tradeoffs in control

    KAUST Repository

    Kostina, Victoria; Hassibi, Babak

    2017-01-01

    function is the mean-square deviation of the system state from the desired state. We study the fundamental tradeoff between the communication rate r bits/sec and the limsup of the expected cost b, and show a lower bound on the rate necessary to attain b

  17. A Robust Interpretation of Teaching Evaluation Ratings

    Science.gov (United States)

    Bi, Henry H.

    2018-01-01

    There are no absolute standards regarding what teaching evaluation ratings are satisfactory. It is also problematic to compare teaching evaluation ratings with the average or with a cutoff number to determine whether they are adequate. In this paper, we use average and standard deviation charts (X[overbar]-S charts), which are based on the theory…

  18. Baseline response rates affect resistance to change.

    Science.gov (United States)

    Kuroda, Toshikazu; Cook, James E; Lattal, Kennon A

    2018-01-01

    The effect of response rates on resistance to change, measured as resistance to extinction, was examined in two experiments. In Experiment 1, responding in transition from a variable-ratio schedule and its yoked-interval counterpart to extinction was compared with pigeons. Following training on a multiple variable-ratio yoked-interval schedule of reinforcement, in which response rates were higher in the former component, reinforcement was removed from both components during a single extended extinction session. Resistance to extinction in the yoked-interval component was always either greater or equal to that in the variable-ratio component. In Experiment 2, resistance to extinction was compared for two groups of rats that exhibited either high or low response rates when maintained on identical variable-interval schedules. Resistance to extinction was greater for the lower-response-rate group. These results suggest that baseline response rate can contribute to resistance to change. Such effects, however, can only be revealed when baseline response rate and reinforcement rate are disentangled (Experiments 1 and 2) from the more usual circumstance where the two covary. Furthermore, they are more cleanly revealed when the programmed contingencies controlling high and low response rates are identical, as in Experiment 2. © 2017 Society for the Experimental Analysis of Behavior.

  19. MBS Ratings and the Mortgage Credit Boom

    NARCIS (Netherlands)

    Ashcraft, A.; Goldsmith-Pinkham, P.; Vickery, J.

    2010-01-01

    We study credit ratings on subprime and Alt-A mortgage-backed securities (MBS) deals issued between 2001 and 2007, the period leading up to the subprime crisis. The fraction of highly-rated securities in each deal is decreasing in mortgage credit risk (measured either ex-ante or ex-post), suggesting

  20. Lung Cancer Rates by Race and Ethnicity

    Science.gov (United States)

    ... the Biggest Cancer Killer in Both Men and Women” Stay Informed Rates by Race and Ethnicity for Other Kinds of Cancer All Cancers Combined Breast Cervical Colorectal (Colon) HPV-Associated Ovarian Prostate Skin Uterine Cancer Home Lung Cancer Rates by Race and Ethnicity Language: ...