WorldWideScience

Sample records for ed refining netback

  1. The changing face of U.S. refining: Ominous notes

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    As environmental protection comes of age in the US, a complex series of structural changes is also expected - in enforcement bureaucracy, manufacturing, and in energy consumption. It is already quite obvious in the petroleum refining industry. A side effect may be the export of jobs. Buyouts and closures are expected, as is increased refined product import dependency. This issue updates expected changes in gasoline and distillate product requirements in the US, and reports some ominous statements from some of the oil industry's affected parties. This issue also presented the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of Jan. 24, 1992; and (2) the ED Fuel Price Tax Series for countries of the Eastern Hemisphere, Jan. 1992 edition

  2. The U.S. dollar value of gasoline: Currency crisis in Europe

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The recent currency crisis in Europe puts the possibility of European economic union in further jeopardy after the Maastricht Treaty was not approved by the Netherlands earlier this Summer. The increased value of European currencies relative to the US dollar during the past Summer had little effect upon national currency gasoline prices. However, the recent currency devaluations in Italy, Spain, and Portugal, already struggling with weak economies, definitely reduce consumer buying power. Governments may use the high taxes imposed on gasoline as a buffer against higher prices, but still, consumers may buy less gasoline as their money doesn't go as far as it once did. This issue also presents the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of Sept. 25, 1992; and (2) the ED Refining Netback Data Series for countries of the Eastern Hemisphere, Sept. 1992 Edition

  3. How Desert Storm changed U.S. oil imports

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    During the past two years, US petroleum imports shrank because of economic recession. There were significant changes in the shares of the shrunken pie because of the Persian Gulf War. This issue of Energy Detente compares US crude and refined product imports by hemisphere and by country during 1991 and 1989. These trends are likely to be reversed for short and long term reasons discussed inside. US dependence on Western Hemisphere countries increased by 0.6%, Venezuela accounting for 17% more imports in 1991 than 1989 and Canada and Mexico 11% and 4% more, respectively. This issue also presents the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of April 10, 1992; and (2) the ED Fuel Price/Tax Series for countries of the Eastern Hemisphere, April 1992 Edition

  4. Price control survey, continued: Five countries: A South-South perspective

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    Among the developing countries, there are multiple strata today, from star performers to those seemingly stuck in self-deepening poverty. Domestic energy-pricing policy, as it will continue to play its key role in economic development, is scrutinized in this issue featuring five developing nations. They make up some of the world's have not and have little peoples, striving to participate in the world economy. The nations examined are Thailand, South Korea, Chile, Venezuela, and Bolivia. This issue also presents the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of Dec. 20, 1991; and (2) the ED Fuel Price/Tax Series for countries of the Eastern Hemisphere, December 1991 edition

  5. Two-tier crude pricing in flux: U.S. postings phenomenon

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    In recent time, US crude oil buyers have invented a means by which the difference between their posted offered buying prices to sellers and the futures market are reduced. Purpose: reduce the bonuses paid to buyers when the futures price soars above the current market price. The problem is that the bonus amount was calculated above the posted price of just one company. Some companies, nervous about possible inferences concerning proper free competition, are dropping the practice. This issue also presents the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of March 27, 1992; and (2) the ED Fuel Price/Tax Series for countries of the Eastern Hemisphere, March 1992 Edition

  6. U.S. demand and imports wither in recession: Oil loses share

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This issue of Energy Detente finds that the economic recession and very low prices for natural gas have cut US use of oil and reduced its oil-import dependency. The period 1985 through 1991 is examined by petroleum product. The 1991 decline in crude oil imports is felt to be an anomaly that will reverse itself in the short term; it was caused by the recession and the flurry of additional production during the Persian Gulf conflict. This issue also presents the following: (1) The ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of April 10, 1992; and (2) the ED Fuel Price/Tax Series for countries of the Western Hemisphere, April 1992 Edition

  7. The 'haves' and 'have nots'. Gasoline price subsidies great and small

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    It is dramatic to compare national retail gasoline prices around the world in oil-rich, developing countries and oil-pore, developed countries. But a new Energy Detente study shows that countries less than 50% dependent upon oil imports, regardless of wealth, have comparatively low prices - and countries more than half dependent on oil imports have high prices. Internal market subsidies, it seems, are only a matter of degree. The 20 oil-producing countries consumed 130 gallon per capita per year, the non-oil countries 79 gallons. This double issue of ED contains the following: (1) the ED Refining Netback Data Series for the U.S. Gulf and West Coasts, Rotterdam; and Singapore as of September 6, and September 20, 1991; and (2) the ED Fuel Price/Tax Series for countries of both the Western and Eastern Hemispheres, September 1991 Edition. 6 figs., 10 tabs

  8. Petroleum in Latin America: Poised for political debottlenecking

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The 1980s are viewed as a 'lost decade' for Latin America by many economists and politicians. Industrialists, too, bemoan the underachievement of many goals that deprived them of financial opportunities. Some of the countries' most critical observers cite the waste of petrodollars and short-sighted management as having deprived populations of longer term benefits from their oil industries. Recent trends of political-economic restructuring, however, point to a brighter future. This issue reviews the above and details some changes in the petroleum industries of a few selected countries. This issue also presents the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of August 7, 1992; and (2) the ED Fuel Price/Tax Series for countries of the Western Hemisphere, August 1992 Edition

  9. Consuming the world's energy: Update series. Energy efficiency trends in oil countries

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This issue of Energy Detente addresses energy efficiency in selected oil producing countries over time and compare the varying effects of important crude oil price changes. As economies around the world heighten their benefits from conservation and efficient use of energy, oil producers will be crucial examples not only for their own sakes, but for consuming countries dependent upon their exports. In this sense, their potential for leadership and vision seems greater than ever. Specifically, 6 oil-exporting countries are featured: Australia, Kuwait, Indonesia, Nigeria, the United Kingdom, and Venezuela. This issue also presents the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of February 21, 1992; and (2) the ED Fuel Price/Tax Series for countries of the Eastern Hemisphere, February, 1992 edition

  10. Shaping future US fuels: A local market laboratory

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    As air pollution becomes a worsening problem around the world, alternative fuels are supported by many as a way to reduce vehicle emissions without impeding mobility. On June 22, 1992, the South Coast Alternative Fuels Demonstration Project, CleanFleet, was launched. CleanFleet is a two-year program that will evaluate the performance of five alternative transportation fuels in a major commercial fleet. The study promises to identify the advantages and pitfalls of five alternative fuels on the basis of emissions, safety, maintenance, reliability, performance, and durability. This issue also contains the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of July 10, 1992; and (2) the ED Fuel Price/Tax Series for countries of the Western Hemisphere, July 1992 Edition

  11. Six months after the Gulf war - Fuel prices and taxes around the world

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    During the first half of 1991, national average gasoline and diesel No. 2 fuel prices declined in many countries in terms of US dollars, due to the stronger US currency and weaker crude oil prices. However, in countries' own currencies, consumer prices were unchanged or higher than they were at the end of 1990. This issue of Energy Detente features findings from their ongoing Fuel Price/Tax Series and closely compares fuel price and tax levels around the world. This issue also presents the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of August 23, 1991; and (2) the ED Fuel Price/Tax Series for countries of the Eastern Hemisphere, August 1991 Edition. 6 figs., 11 tabs

  12. Linkages between the markets for crude oil and the markets for refined products

    International Nuclear Information System (INIS)

    Didziulis, V.S.

    1990-01-01

    To understand the crude oil price determination process it is necessary to extend the analysis beyond the markets for petroleum. Crude oil prices are determined in two closely related markets: the markets for crude oil and the markets for refined products. An econometric-linear programming model was developed to capture the linkages between the markets for crude oil and refined products. In the LP refiners maximize profits given crude oil supplies, refining capacities, and prices of refined products. The objective function is profit maximization net of crude oil prices. The shadow price on crude oil gives the netback price. Refined product prices are obtained from the econometric models. The model covers the free world divided in five regions. The model is used to analyze the impacts on the markets of policies that affect crude oil supplies, the demands for refined products, and the refining industry. For each scenario analyzed the demand for crude oil is derived from the equilibrium conditions in the markets for products. The demand curve is confronted with a supply curve which maximizes revenues providing an equilibrium solution for both crude oil and product markets. The model also captures crude oil price differentials by quality. The results show that the demands for crude oil are different across regions due to the structure of the refining industries and the characteristics of the demands for refined products. Changes in the demands for products have a larger impact on the markets than changes in the refining industry. Since markets for refined products and crude oil are interrelated they can't be analyzed individually if an accurate and complete assessment of a policy is to be made. Changes in only one product market in one region affect the other product markets and the prices of crude oil

  13. Fuel prices around the world: From prosperity to turmoil

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This issue examines price changes of petroleum products in some 40 countries around the world. Both political turmoil and economic prosperity shape government policy in managing consumer prices of petroleum products. Brazil has experienced extreme political and economic instability that sent prices skyrocketing and the national currency plummeting. Meanwhile, economic growth in South Korea has given the population the wealth for automobiles and stretched the country's ability to supply its unquenchable demand. Fuel prices around the world were higher in July 1992 than in January 1992, mainly due to higher crude prices. This issue also presents the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of October 23, 1992; and (2) the ED Fuel Price/Tax Series for countries of the Eastern Hemisphere, October 1992 edition

  14. Prices, taxes around the world - And why. Annual survey results

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    On a world average basis, gasoline and diesel No. 2 prices to consumers declined modestly between January 1991 and January 1992, Energy Detente's survey finds. The drops were in response to falling crude oil prices that followed the conclusion of the Persian Gulf War. Demand increases in 1991, where they occurred, are expected to continue in the short term. This issue details price changes by country and highlights causes in selected countries. Sizable oil-consumption declines in the former USSR and Eastern Bloc countries mask substantial increases among European member nations of OECD. This issue also presents the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of May 15, 1992; and (2) the ED Fuel Price/Tax Series for countries of the Western Hemisphere, May 1992 Edition

  15. Why U.S. gasoline costs are bottlenecked: An editorial on oil P.R

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    It is widely acknowledged that massive funds will have to be injected to expand production and supplies of crude oil, natural gas, and derivatives from the Middle East, former Soviet Union, and other producing areas to accommodate future world consumption. In the US, a combination of high business costs and denied access to high potential oil fields are causing the migration of talent and dollars abroad - probably for many years to come. but for the remainder of this decade, there are new strains on the domestic refined-product supply and marketing systems due to a lack of public appreciation of rising environmental-protection costs. This issue presents publisher Thilby Lundberg's address to the Los angeles petroleum Club on Oct. 14, 1992; it is an anecdotal account of US oil industry developments, and their public perceptions, during the period 1950-2000. This issue also presents the following: the ED Refining netback Data Series for the US Gulf and West Coasts, Rotterdam and Singapore as of oct. 9, 1992; and (2) the ED Fuel Price/Tax Series for countries of the Western Hemisphere, October 1992 Edition

  16. The heavy oil refiners needs in the future

    International Nuclear Information System (INIS)

    Sauer, J.W.

    1991-01-01

    In the 1970s oil crisis, the high price differential that developed between heavy and light crude led to an expansion in heavy crude processing geared to producing light oil products. The subsequent collapse in prices meant that heavy crudes with low netbacks were shut in, heavy crude refining capacity exceeded the restrained production of heavy crudes, and refineries were operating at losses. However, the low prices for oil rekindled demand and spare production capacity has been absorbed. The crude oil price is forecast to rise to ca $27/bbl by the late 1990s, which is favorable for heavy crude oil production. Nevertheless, investments in heavy crude production are exposed to a high degree of risk. A strategy for dealing with this risk is to integrate into downstream, which makes more sense for heavy crude producers than for conventional producers. On the other hand, such integration is capital-intensive, and light oils will likely be favored in crude oil production developments for the next several years. Low prices for natural gas will make it hard to find markets for residual fuel made from heavy crudes. 8 figs

  17. MicroED data collection and processing

    Energy Technology Data Exchange (ETDEWEB)

    Hattne, Johan; Reyes, Francis E.; Nannenga, Brent L.; Shi, Dan; Cruz, M. Jason de la [Janelia Research Campus, Howard Hughes Medical Institute, Ashburn, VA 20147 (United States); Leslie, Andrew G. W. [Medical Research Council Laboratory of Molecular Biology, Cambridge (United Kingdom); Gonen, Tamir, E-mail: gonent@janelia.hhmi.org [Janelia Research Campus, Howard Hughes Medical Institute, Ashburn, VA 20147 (United States)

    2015-07-01

    The collection and processing of MicroED data are presented. MicroED, a method at the intersection of X-ray crystallography and electron cryo-microscopy, has rapidly progressed by exploiting advances in both fields and has already been successfully employed to determine the atomic structures of several proteins from sub-micron-sized, three-dimensional crystals. A major limiting factor in X-ray crystallography is the requirement for large and well ordered crystals. By permitting electron diffraction patterns to be collected from much smaller crystals, or even single well ordered domains of large crystals composed of several small mosaic blocks, MicroED has the potential to overcome the limiting size requirement and enable structural studies on difficult-to-crystallize samples. This communication details the steps for sample preparation, data collection and reduction necessary to obtain refined, high-resolution, three-dimensional models by MicroED, and presents some of its unique challenges.

  18. Mathematical aspects of Rietveld refinement and crystal structure ...

    Indian Academy of Sciences (India)

    Administrator

    The core mathematics, goodness-of-fit parameters of Rietveld refinement technique is introduced for structural ... transducers in medical and solar applications (Obmann ..... Prince 1985 in Structure and statistics in crystallography (ed.).

  19. Structure of catalase determined by MicroED

    Science.gov (United States)

    Nannenga, Brent L; Shi, Dan; Hattne, Johan; Reyes, Francis E; Gonen, Tamir

    2014-01-01

    MicroED is a recently developed method that uses electron diffraction for structure determination from very small three-dimensional crystals of biological material. Previously we used a series of still diffraction patterns to determine the structure of lysozyme at 2.9 Å resolution with MicroED (Shi et al., 2013). Here we present the structure of bovine liver catalase determined from a single crystal at 3.2 Å resolution by MicroED. The data were collected by continuous rotation of the sample under constant exposure and were processed and refined using standard programs for X-ray crystallography. The ability of MicroED to determine the structure of bovine liver catalase, a protein that has long resisted atomic analysis by traditional electron crystallography, demonstrates the potential of this method for structure determination. DOI: http://dx.doi.org/10.7554/eLife.03600.001 PMID:25303172

  20. Characterising non-urgent users of the emergency department (ED): A retrospective analysis of routine ED data.

    Science.gov (United States)

    O'Keeffe, Colin; Mason, Suzanne; Jacques, Richard; Nicholl, Jon

    2018-01-01

    The pressures of patient demand on emergency departments (EDs) continue to be reported worldwide, with an associated negative impact on ED crowding and waiting times. It has also been reported that a proportion of attendances to EDs in different international systems could be managed in settings such as primary care. This study used routine ED data to define, measure and profile non-urgent ED attendances that were suitable for management in alternative, non-emergency settings. We undertook a retrospective analysis of three years of Hospital Episode and Statistics Accident Emergency (HES A&E) data for one large region in England, United Kingdom (April 1st 2011 to March 31st 2014). Data was collected on all adult (>16 years) ED attendances from each of the 19 EDs in the region. A validated process based definition of non-urgent attendance was refined for this study and applied to the data. Using summary statistics non-urgent attenders were examined by variables hypothesised to influence them as follows: age at arrival, time of day and day of week and mode of arrival. Odds ratios were calculated to compare non-urgent attenders between groups. There were 3,667,601 first time attendances to EDs, of which 554,564 were defined as non-urgent (15.1%). Non-urgent attendances were significantly more likely to present out of hours than in hours (OR = 1.19, 95% CI: 1.18 to 1.20, Paged 16-44) compared to those aged 45-64 (odds ratio: 1.42, 95% CI: 1.41 to 1.43, Puse the ED to obtain healthcare that could be provided in a less urgent setting and also more likely to do this out of hours. Alternative services are required to manage non-urgent demand, currently being borne by the ED and the ambulance service, particularly in out of hours.

  1. Characterising non-urgent users of the emergency department (ED: A retrospective analysis of routine ED data.

    Directory of Open Access Journals (Sweden)

    Colin O'Keeffe

    Full Text Available The pressures of patient demand on emergency departments (EDs continue to be reported worldwide, with an associated negative impact on ED crowding and waiting times. It has also been reported that a proportion of attendances to EDs in different international systems could be managed in settings such as primary care. This study used routine ED data to define, measure and profile non-urgent ED attendances that were suitable for management in alternative, non-emergency settings.We undertook a retrospective analysis of three years of Hospital Episode and Statistics Accident Emergency (HES A&E data for one large region in England, United Kingdom (April 1st 2011 to March 31st 2014. Data was collected on all adult (>16 years ED attendances from each of the 19 EDs in the region. A validated process based definition of non-urgent attendance was refined for this study and applied to the data. Using summary statistics non-urgent attenders were examined by variables hypothesised to influence them as follows: age at arrival, time of day and day of week and mode of arrival. Odds ratios were calculated to compare non-urgent attenders between groups.There were 3,667,601 first time attendances to EDs, of which 554,564 were defined as non-urgent (15.1%. Non-urgent attendances were significantly more likely to present out of hours than in hours (OR = 1.19, 95% CI: 1.18 to 1.20, P<0.001. The odds of a non-urgent attendance were significantly higher for younger patients (aged 16-44 compared to those aged 45-64 (odds ratio: 1.42, 95% CI: 1.41 to 1.43, P<0.001 and the over 65's (odds ratio: 3.81, 95% CI: 3.78 to 3.85, P<0.001. Younger patients were significantly more likely to attend non-urgently out of hours compared to the 45-64's (OR = 1.24, 95% CI: 1.22 to 1.25, P<0.001 and the 65+'s (OR = 1.38, 95% CI: 1.35 to 1.40, P<0.001. 110,605/554,564 (19.9% of the non-urgent attendances arrived by ambulance, increasing significantly out of hours versus in hours (OR = 2

  2. Role of manganese on the grain refining efficiency of AZ91D magnesium alloy refined by Al4C3

    International Nuclear Information System (INIS)

    Liu Shengfa; Zhang Yuan; Han Hui

    2010-01-01

    A novel Mg-50% Al 4 C 3 (hereafter in wt.%) master alloy has been developed by powder in situ synthesis process, the role of manganese on the grain refining efficiency of AZ91D magnesium alloy refined by this master alloy has been investigated. X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS) results show the existence of Al 4 C 3 particles in this master alloy. After addition of 0.6% Al 4 C 3 or combined addition of 0.6% Al 4 C 3 and 0.27% Mn, the average grain size of AZ91D decreased dramatically from 360 μm to 210 μm, and from 360 μm to130 μm, respectively. However, no further refinement of grain size was achieved with additional amount of Mn exceeding 0.27% for AZ91D alloy refined by 0.6% Al 4 C 3 in the present investigation. Al-C-O-Mn-Fe-rich intermetallic particles with an Al-C-O-rich coating film, often observed in the central region of magnesium grains of the AZ91D alloy treated by the combination of Al 4 C 3 and Mn, are proposed to be the potent nucleating substrates for primary α-Mg.

  3. An Isogeometric Design-through-analysis Methodology based on Adaptive Hierarchical Refinement of NURBS, Immersed Boundary Methods, and T-spline CAD Surfaces

    Science.gov (United States)

    2012-01-22

    Bungartz HJ, Rank E, Niggl A, Romberg R. Extending the p-Version of Finite Elements by an Octree-Based Hierarchy. In: Widlund OB, Keyes DE (eds...generalization to higher dimensions. We test hierarchical refinement of NURBS for some elementary fluid and structural analysis problems in two and three...with straightforward implementation in tree data structures and simple generalization to higher dimensions. We test hierarchical refinement of NURBS

  4. Towards automated crystallographic structure refinement with phenix.refine

    Energy Technology Data Exchange (ETDEWEB)

    Afonine, Pavel V., E-mail: pafonine@lbl.gov; Grosse-Kunstleve, Ralf W.; Echols, Nathaniel; Headd, Jeffrey J.; Moriarty, Nigel W. [Lawrence Berkeley National Laboratory, One Cyclotron Road, MS64R0121, Berkeley, CA 94720 (United States); Mustyakimov, Marat; Terwilliger, Thomas C. [Los Alamos National Laboratory, M888, Los Alamos, NM 87545 (United States); Urzhumtsev, Alexandre [CNRS–INSERM–UdS, 1 Rue Laurent Fries, BP 10142, 67404 Illkirch (France); Université Henri Poincaré, Nancy 1, BP 239, 54506 Vandoeuvre-lès-Nancy (France); Zwart, Peter H. [Lawrence Berkeley National Laboratory, One Cyclotron Road, MS64R0121, Berkeley, CA 94720 (United States); Adams, Paul D. [Lawrence Berkeley National Laboratory, One Cyclotron Road, MS64R0121, Berkeley, CA 94720 (United States); University of California Berkeley, Berkeley, CA 94720 (United States)

    2012-04-01

    phenix.refine is a program within the PHENIX package that supports crystallographic structure refinement against experimental data with a wide range of upper resolution limits using a large repertoire of model parameterizations. This paper presents an overview of the major phenix.refine features, with extensive literature references for readers interested in more detailed discussions of the methods. phenix.refine is a program within the PHENIX package that supports crystallographic structure refinement against experimental data with a wide range of upper resolution limits using a large repertoire of model parameterizations. It has several automation features and is also highly flexible. Several hundred parameters enable extensive customizations for complex use cases. Multiple user-defined refinement strategies can be applied to specific parts of the model in a single refinement run. An intuitive graphical user interface is available to guide novice users and to assist advanced users in managing refinement projects. X-ray or neutron diffraction data can be used separately or jointly in refinement. phenix.refine is tightly integrated into the PHENIX suite, where it serves as a critical component in automated model building, final structure refinement, structure validation and deposition to the wwPDB. This paper presents an overview of the major phenix.refine features, with extensive literature references for readers interested in more detailed discussions of the methods.

  5. TED-Ed lessons & TED-Ed clubs: Educational activities to amplify students' voices

    Science.gov (United States)

    Villias, Georgios

    2017-04-01

    TED-Ed lessons and TED-Ed clubs are two powerful educational tools that can be used in today's school classrooms in order to create an educational environment that is engaging for the students and favors their active participation, created and fostered by TED-Ed. TED-Ed is TED's educational initiative, committed to create lessons worth sharing and amplify the voices and ideas of teachers and students around the world. TED-Ed animated lessons are fully organized lessons structured around an animated video that introduces new topics to learners in an exciting, thought-provoking way. These lessons have been created as a result of the cooperation between expert educators and animators and have been uploaded at the TED-Ed platform (http://ed.ted.com). On the other hand, TED-Ed Clubs are also an interesting way to offer students the chance, the voice and the opportunity to express their thoughts, engage actively on these matters and connect with each other, both at a local, as well as at an international level (http://ed.ted.com/clubs). By developing new TED-Ed lessons or by customizing appropriately existing animated TED-Ed lessons (translating, modifying the questions asked, introducing new discussion topics), I have created and implemented in my student-centered, didactic approach, a series of TED-ED animated lessons directly connected with the Greek national science syllabus that were used to spark students curiosity and initiate a further analytical discussion or introduce other relevant educational activities (http://gvillias.wixsite.com/education). Furthermore, at my school, we established Varvakeio TED-Ed Club, an environment that supports and empowers our students to research, develop and disseminate their own personal ideas that worth spreading. During the year, our members were inspired by watching TED talks presented by experts on their field on various different areas, including social, economical, environmental and technological-scientific issues. Our aim

  6. Electron microscopy investigation of the TiBAl and TiCAl grain refiner master alloys

    International Nuclear Information System (INIS)

    Cizek, P

    2006-01-01

    The present work brings a detailed statistical analysis of the microstructural characteristics and chemistry of the second phase particles present in the Al-5Ti-1B and Al- 3Ti-0.15C (wt.%) commercial grain refiner rods used in the Al casting industry. The investigation was performed using the TEM, EDS, STEM and HREM techniques. Both refiner rods contained large, blocky Al 3 Ti DO 22 particles. Borides present in the TiBAl rod, known to be main α-Al nucleation substrates, exhibited a facetted, hexagonal platelet morphology and largely represented a mixed (Ti,Al)B 2 phase, with Ti and Al contents changing continuously across the particle dimensions. There were two distinct families of small particles observed in the TiCAl rod. The coarser, facetted particles corresponded to cubic TiC crystal structure and these are believed to be major α-Al nucleation sites. The family of finer, round particles appeared to correspond to orthorhombic Al 6 Fe phase and their role in the nucleation process remains to be clarified. The results obtained may be used in optimising the grain refiner rod microstructures that would ensure improved refining performance during casting

  7. Electron microscopy investigation of the TiBAl and TiCAl grain refiner master alloys

    Energy Technology Data Exchange (ETDEWEB)

    Cizek, P [IMMPETUS, Department of Engineering Materials, University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom)

    2006-02-22

    The present work brings a detailed statistical analysis of the microstructural characteristics and chemistry of the second phase particles present in the Al-5Ti-1B and Al- 3Ti-0.15C (wt.%) commercial grain refiner rods used in the Al casting industry. The investigation was performed using the TEM, EDS, STEM and HREM techniques. Both refiner rods contained large, blocky Al{sub 3}Ti DO{sub 22} particles. Borides present in the TiBAl rod, known to be main {alpha}-Al nucleation substrates, exhibited a facetted, hexagonal platelet morphology and largely represented a mixed (Ti,Al)B{sub 2} phase, with Ti and Al contents changing continuously across the particle dimensions. There were two distinct families of small particles observed in the TiCAl rod. The coarser, facetted particles corresponded to cubic TiC crystal structure and these are believed to be major {alpha}-Al nucleation sites. The family of finer, round particles appeared to correspond to orthorhombic Al{sub 6}Fe phase and their role in the nucleation process remains to be clarified. The results obtained may be used in optimising the grain refiner rod microstructures that would ensure improved refining performance during casting.

  8. Towards automated crystallographic structure refinement with phenix.refine

    OpenAIRE

    Afonine, Pavel V.; Grosse-Kunstleve, Ralf W.; Echols, Nathaniel; Headd, Jeffrey J.; Moriarty, Nigel W.; Mustyakimov, Marat; Terwilliger, Thomas C.; Urzhumtsev, Alexandre; Zwart, Peter H.; Adams, Paul D.

    2012-01-01

    phenix.refine is a program within the PHENIX package that supports crystallographic structure refinement against experimental data with a wide range of upper resolution limits using a large repertoire of model parameterizations. It has several automation features and is also highly flexible. Several hundred parameters enable extensive customizations for complex use cases. Multiple user-defined refinement strategies can be applied to specific parts of the model in a single refinement run. An i...

  9. Inform@ed space

    DEFF Research Database (Denmark)

    Bjerrum, Peter; Olsen, Kasper Nefer

    2001-01-01

    Inform@ed space Sensorial Perception And Computer Enchancement - bidrag til Nordisk Arkitekturforskningsforenings IT-konference, AAA april 2001.......Inform@ed space Sensorial Perception And Computer Enchancement - bidrag til Nordisk Arkitekturforskningsforenings IT-konference, AAA april 2001....

  10. Structural refinement, photoluminescence and Raman spectroscopy of wurtzite Mn-doped Zn O pellets

    Energy Technology Data Exchange (ETDEWEB)

    Marquina, J.; Martin, J.; Luengo, J.; Vera, F.; Roa, L. [Centro de Estudios Avanzados en Optica, Universidad de los Andes, Merida 5101 (Venezuela, Bolivarian Republic of); Gonzalez, J. [Centro de Estudios de Semiconductores, Universidad de los Andes, Merida 5101 (Venezuela, Bolivarian Republic of); Rodriguez, F.; Renero L, C.; Valiente, R. [Malta-Consolider Team, CITIMAC, Facultad de Ciencias, Universidad de Cantabria, Santander 69005 (Spain); Delgado, G. E., E-mail: marquinajesus@gmail.com [Laboratorio de Cristalografia, Facultad de Ciencias, Universidad de los Andes, Merida 5101 (Venezuela, Bolivarian Republic of)

    2017-11-01

    We report the results of the Rietveld refinement, photoluminescence and Raman spectroscopy of Mn-doped Zn O ceramic pellets. Rietveld refinement shows that samples crystallize in the wurtzite structure and for the Mn-doped sample indicated that the Mn atoms substitute the Zn tetrahedral crystallographic sites in the Zn O host lattice. The emission and absorption spectra of Mn-doped Zn O have been investigated in the visible-UV region and the data have been interpreted in terms of the wurtzite Zn O electronic structure. Two broad bands, one due to superposition between donor bound excitons (DX) and free excitons (FX) and other due free-to bond excitonic recombination (FB) dominates the low-temperature photoluminescence spectra of Mn-doped Zn O bulk. In the Raman spectrum, an extra mode at ∼520 cm{sup -1} has been observed in agreement with earlier works, and it is an indicator for the incorporation of Mn{sup +2} ions into the Zn O host matrix since it is not is observed in Zn O pristine. Rietveld refinement of the X-ray diffraction patterns, energy-dispersive X-ray spectroscopy (EDS) technique, and Raman spectroscopies were performed to study these effects. (Author)

  11. New EdF's three challenges

    International Nuclear Information System (INIS)

    Lepetit, V.

    2005-01-01

    The opening of 15% of Electricite de France (EdF) capital to the private sector will allow the first world electric utility to raise 7 billions of euros of cash flow. EdF will have also to face the new European situation: a strained market, several consolidations to come and many competitors to deal with. EdF has to re-launch its production tool and to reinforce its interconnection capacities if it wants to stay the number one of power exports in Europe. The integration of Edison company (Italy) by EdF gives access to new gas capacities but other resources have to be found if EdF wants to enlarge its gas offer. A new concentration era is foreseen in Europe and EdF will have to seize the economic growth opportunities in particular in Europe and China. (J.S.)

  12. Refining revolution

    Energy Technology Data Exchange (ETDEWEB)

    Fesharaki, F.; Isaak, D.

    1984-01-01

    A review of changes in the oil refining industry since 1973 examines the drop in capacity use and its effect on profits of the Organization of Economic Cooperation and Development (OECD) countries compared to world refining. OPEC countries used their new oil revenues to expand Gulf refineries, which put additional pressure on OECD refiners. OPEC involvement in global marketing, however, could help to secure supplies. Scrapping some older OECD refineries could improve the percentage of capacity in use if new construction is kept to a minimum. Other issues facing refiners are the changes in oil demand patterns and government responses to the market. 2 tables.

  13. The research on the effect of MgCO{sub 3} on the grain refinement in AZ31 magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Gao, S.Y.; Cui, J.Z.; Li, Q.C.; Zhang, Z.Q. [Key Laboratory of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang (China)

    2010-08-15

    The effect of MgCO{sub 3} addition on the as-cast microstructure of AZ31 magnesium alloy has been widely investigated. The results show that the average grain size of the {alpha}-Mg grain in AZ31 magnesium alloy decreases from about 570 {mu}m to 100 {mu}m by the addition of 0.6 wt.% MgCO{sub 3} as gain refiner at 760 C. Based on the analysis of EDS, theoretical calculation of E{sub bind} and Gibbs free energy, we esteem that grain refiner mechanism is mainly attributed to the generation of Al{sub 4}C{sub 3}, which can be serviced as nucleation site and restrain grain boundary from growing and transferring. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  14. Automated element identification for EDS spectra evaluation using quantification and integrated spectra simulation approaches

    International Nuclear Information System (INIS)

    Eggert, F

    2010-01-01

    This work describes first real automated solution for qualitative evaluation of EDS spectra in X-ray microanalysis. It uses a combination of integrated standardless quantitative evaluation, computation of analytical errors to a final uncertainty, and parts of recently developed simulation approaches. Multiple spectra reconstruction assessments and peak searches of the residual spectrum are powerful enough to solve the qualitative analytical question automatically for totally unknown specimens. The integrated quantitative assessment is useful to improve the confidence of the qualitative analysis. Therefore, the qualitative element analysis becomes a part of integrated quantitative spectrum evaluation, where the quantitative results are used to iteratively refine element decisions, spectrum deconvolution, and simulation steps.

  15. EDS operator and control software

    International Nuclear Information System (INIS)

    Ott, L.L.

    1985-04-01

    The Enrichment Diagnostic System (EDS) was developed at Lawrence Livermore National Laboratory (LLNL) to acquire, display and analyze large quantities of transient data for a real-time Advanced Vapor Laser Isotope Separation (AVLIS) experiment. Major topics discussed in this paper are the EDS operator interface (SHELL) program, the data acquisition and analysis scheduling software, and the graphics software. The workstation concept used in EDS, the software used to configure a user's workstation, and the ownership and management of a diagnostic are described. An EDS diagnostic is a combination of hardware and software designed to study specific aspects of the process. Overall system performance is discussed from the standpoint of scheduling techniques, evaluation tools, optimization techniques, and program-to-program communication methods. EDS is based on a data driven design which keeps the need to modify software to a minimum. This design requires a fast and reliable data base management system. A third party data base management product, Berkeley Software System Database, written explicitly for HP1000's, is used for all EDS data bases. All graphics is done with an in-house graphics product, Device Independent Graphics Library (DIGLIB). Examples of devices supported by DIGLIB are: Versatec printer/plotters, Raster Technologies Graphic Display Controllers, and HP terminals (HP264x and HP262x). The benefits derived by using HP hardware and software as well as obstacles imposed by the HP environment are presented in relation to EDS development and implementation

  16. edX e-learning course development

    CERN Document Server

    Gilbert, Matthew A

    2015-01-01

    If you are an educator creating a course for edX or a corporate trainer using Open edX for large-scale learning and development initiatives, then edX E-Learning Course Development is the ideal book for you.

  17. PREFACE: EDS2010 Preface

    Science.gov (United States)

    Heggie, Malcolm I.

    2011-03-01

    The biennial international conference on Extended Defects in Semiconductors started in 1978 with a meeting in Hünfeld, Germany. Subsequent meetings rotated between Poland, France, Great Britain, Germany, Russia and Italy, culminating in EDS2004 in Chernogolovka, EDS2006 in Halle and EDS2008 in Poitiers. EDS2010 was held at the University of Sussex at Brighton, UK from September 19th to 24th. An extension of the tabulation of this history, which first appeared on the EDS2006 website, is given in the attached PDF. It is with sadness that we note one of the founders of the series, Prof. Dr Helmut Alexander, passed away on 3 December 2009 and we were proud to dedicate EDS2010 to his memory. It has become a tradition to make an award in his name, and this year it was made to Ivan Isacov for his poster "Electrical levels of dislocation networks in p- and n-type silicon". A short and warm celebration of Prof. Dr Alexander's life by his friends and colleagues, Prof. Drs Helmut Gottschalk, Eicke Weber and Wolfgang Schröter, is included in this volume. The conference was a forum for the state-of-the-art of investigation and modelling of extended defects in semiconductors. Scientists from universities, research institutes and industry made contributions to a deeper understanding of extended defects, their interaction with point defects and their role in the development of semiconductor technology. The remit of the conference included extended defects, nanostructures, nanoparticles, quantum dots and interfaces within semiconducting materials ranging from narrow to wide band gaps, including graphene-derived materials and diamond. Scientific interests range from defect geometry, electronic structure, dynamics, spectroscopy, microscopy, reactions and chemistry to introduction mechanisms, such as implantation and strained layers and the operation of devices such as integrated circuits, heterostructures, and solar cells. The organisers were confronted with a long period between

  18. EdF: high tension(s) metamorphosis

    International Nuclear Information System (INIS)

    Roussely, F.; Arnoux, P.; Baritault, A.; Alto, P.; Castets, C.; Secondi, J.

    2003-01-01

    Electricite de France, the French electric utility, has to face a formidable mutation. The deregulation of the power market will lead to a social, commercial, judicial, financial and international 'big-bang'. The company has been weakened by disappointing results and by an embarrassing running into debts. This dossier analyzes the consequences of the deregulation of the French power market on the future evolution of EdF. It includes the analysis made by a French economist, E. Cohen, an interview and a portrait of F. Roussely, head of EdF, a presentation of Easenergy, a start-up of EdF which makes partnerships with US energy-related companies, the worries of EdF's employees and the redistribution of the syndicates power inside the company, the controversy around EdF's 2002 results and the points that remained in the shade, EdF's European competitors and the progressive opening of the French power market, EDF's production tool and its availability (58 nuclear reactors, 538 hydroelectric power plants and 26 thermal power plants), the costly foreign markets strategy of EdF and the under-capitalization of the company. (J.S.)

  19. Influence of refining time on nonmetallic inclusions in a low-carbon, silicon-killed steel

    International Nuclear Information System (INIS)

    Fernandes, Marcolino; Pires, Jose Carlos; Cheung, Noe; Garcia, Amauri

    2003-01-01

    Nonmetallic inclusions are harmful to the mechanical properties of every kind of steel produced worldwide. The greater the size of the inclusion present in the structure of a determined kind of steel, the greater its negative effect on the quality of the steel. Therefore, the objective of this work was to investigate the size, the quantity, the shape and the chemical composition of nonmetallic inclusions formed throughout the refining process of silicon-killed, low-carbon steel, as a function of the treatment time in a ladle furnace, trying to ensure the flotation of inclusions bigger than 25 μm. This investigation was carried out using a scanning electron microscope (SEM), with an analysis system using energy dispersive spectometry (EDS). Based on this work, it was possible to know more precisely the nature of the inclusions, the necessary time to ensure flotation of large inclusions, the efficiency of the slag to capture the inclusions, and the inclusion level of the steel throughout its refining process to try to obtain a higher quality steel product

  20. EDS becoms CERN Openlab contributor

    CERN Multimedia

    2007-01-01

    "EDS announced that it has become an official contributor to CERN openlab. The purpose of the joint project beteween CERN and EDS is to carry out research and development in the field of monitoring, management and operation of grid services." (1 page)

  1. RT-PCR Analysis of ED-A,ED-B, and IIICS Fibronectin Domains: A New Screening Marker For Bladder Cancer

    Directory of Open Access Journals (Sweden)

    M Ahmadi Javid

    2004-12-01

    Full Text Available Background: Fibronectin seems to play a very important role in the progression and invasion of bladder cancer. EDA, EDB, and IIICS domains of fibronectin are not expressed in the adult persons but they’re expressed in different cancers. The aim of this study is to investigate the mRNA of fibronectin in transitional carcinoma cells (TCC of bladder to study these domains. Methods: A total of 20 patients with known bladder cancer were studied. Two of them excluded since their excised tissues were not enough for both the pathological examination and RNA study. Another 20 (control group were normal volunteers who needed bladder operations. The excised tissue was immediately transferred to RNAlater (Ambion,TX. RNA was extracted via RNAWIZ (Ambion, TX. cDNA was made via RevertAid First Strand cDNA Synthesis Kit (Fermentas. PCR of the cDNAs was performed using primers for EDA, EDB, and IIICS (Eurogentec,Belgium. Results: For the first time, we present the expression of the oncofetal fibronectin mRNA in the transitional cell carcinoma of bladder. The high grade muscle invasive (G3T2 tumor, expressed ED-A, ED-B, and IIICS. Expression of ED-A, ED-B, and IIICS was confirmed in the two patients with G3T1 TCC. The four patients with G2Ta and G3Ta expressed both ED-A and ED-B. The four patients with G1T1 tumor expressed ED-A only, similar to the nine patients with G1Ta tumor. None of the normal volunteers expressed the oncofetal extra domains. The sensitivity of ED-A positive fibronectin RNA for detecting TCC of any kind is 100%, and of ED-B was only 35%. The specificity of ED-B positive fibronectin RNA for the high grade TCC is 100%. Conclusion: ED-A, ED-B, and IIICS could be used as useful markers for the diagnosis and following up of bladder carcinoma. Keywords: Transitional Cell Carcinoma, bladder cancer, fibronectin, RT-PCR, oncofetal.

  2. Petroleum refining industry in China

    International Nuclear Information System (INIS)

    Walls, W.D.

    2010-01-01

    The oil refining industry in China has faced rapid growth in oil imports of increasingly sour grades of crude with which to satisfy growing domestic demand for a slate of lighter and cleaner finished products sold at subsidized prices. At the same time, the world petroleum refining industry has been moving from one that serves primarily local and regional markets to one that serves global markets for finished products, as world refining capacity utilization has increased. Globally, refined product markets are likely to experience continued globalization until refining investments significantly expand capacity in key demand regions. We survey the oil refining industry in China in the context of the world market for heterogeneous crude oils and growing world trade in refined petroleum products. (author)

  3. On the refinement calculus

    CERN Document Server

    Vickers, Trevor

    1992-01-01

    On the Refinement Calculus gives one view of the development of the refinement calculus and its attempt to bring together - among other things - Z specifications and Dijkstra's programming language. It is an excellent source of reference material for all those seeking the background and mathematical underpinnings of the refinement calculus.

  4. Software Prototyping: A Case Report of Refining User Requirements for a Health Information Exchange Dashboard.

    Science.gov (United States)

    Nelson, Scott D; Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R

    2016-01-01

    Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system.

  5. North American refining

    International Nuclear Information System (INIS)

    Osten, James; Haltmaier, Susan

    2000-01-01

    This article examines the current status of the North American refining industry, and considers the North American economy and the growth in demand in the petroleum industry, petroleum product demand and quality, crude oil upgrading to meet product standards, and changes in crude oil feedstocks such as the use of heavier crudes and bitumens. Refining expansion, the declining profits in refining, and changes due to environmental standards are discussed. The Gross Domestic Product and oil demand for the USA, Canada, Mexico, and Venezuela for the years 1995-2020 are tabulated

  6. The role of the aggregator in today`s marketing environment

    Energy Technology Data Exchange (ETDEWEB)

    MacDonald, K.J. [ProGas Limited, Calgary, AB (Canada)

    1997-05-01

    The role of the aggregator in the current natural gas market environment is to get the highest possible netback return for the producers over the longer term. The reasons why a producer would choose to market through an aggregator were presented. Reasons could be as diverse as markets, transportation, supply, and administrative efficiencies. Some of the recent changes in the marketplace and how they can potentially affect an aggregator, were described. ProGas is a producer-owned netback gas aggregator that combines the supply from a pool of over 170 producers in Western Canada. The success of ProGas can be attributed to the netback purchasing arrangements and the implicit thrust by producers in the company that there is no conflict between the interests of ProGas and its shareholders with the interests of the producers in the pool, and that all producers in the pool are treated equally.

  7. The role of the aggregator in today's marketing environment

    International Nuclear Information System (INIS)

    MacDonald, K.J.

    1997-01-01

    The role of the aggregator in the current natural gas market environment is to get the highest possible netback return for the producers over the longer term. The reasons why a producer would choose to market through an aggregator were presented. Reasons could be as diverse as markets, transportation, supply, and administrative efficiencies. Some of the recent changes in the marketplace and how they can potentially affect an aggregator, were described. ProGas is a producer-owned netback gas aggregator that combines the supply from a pool of over 170 producers in Western Canada. The success of ProGas can be attributed to the netback purchasing arrangements and the implicit thrust by producers in the company that there is no conflict between the interests of ProGas and its shareholders with the interests of the producers in the pool, and that all producers in the pool are treated equally

  8. Hearing of Mr. Francois Roussely, President of EdF; Audition de M. Francois Roussely, President d'EdF

    Energy Technology Data Exchange (ETDEWEB)

    Roussely, F. [Electricite de France (EDF), 75 - Paris (France)

    2005-07-01

    This document is the proceedings of the hearing of F. Roussely, President of Electricite de France (EdF), at the commission of economic affairs of the French house of commons, about the advisability of the construction of the EPR (European pressurized reactor) demonstration plant and about its possible financing by EdF. In a first part, F. Roussely recalls the European context of deregulation of energy markets and its impact of the French electric power industry (opening of the French market, industrial and social actions of EdF, need of a new generation of nuclear reactor, preservation of EdF's energy mix, warranty of public utility, un-bundling between energy trade and distribution, EdF's turnover and profitability, EdF's foreign daughter companies). In a second part, F. Roussely answers a series of questions asked by the different members of the commission concerning the different points presented in the first part. (J.S.)

  9. Refinement of Parallel and Reactive Programs

    OpenAIRE

    Back, R. J. R.

    1992-01-01

    We show how to apply the refinement calculus to stepwise refinement of parallel and reactive programs. We use action systems as our basic program model. Action systems are sequential programs which can be implemented in a parallel fashion. Hence refinement calculus methods, originally developed for sequential programs, carry over to the derivation of parallel programs. Refinement of reactive programs is handled by data refinement techniques originally developed for the sequential refinement c...

  10. Creating value in refining

    International Nuclear Information System (INIS)

    Cobb, C.B.

    2001-01-01

    This article focuses on recent developments in the US refining industry and presents a model for improving the performance of refineries based on the analysis of the refining industry by Cap Gemini Ernst and Young. The identification of refineries in risk of failing, the construction of pipelines for refinery products from Gulf State refineries, mergers and acquisitions, and poor financial performance are discussed. Current challenges concerning the stagnant demand for refinery products, environmental regulations, and shareholder value are highlighted. The structure of the industry, the creation of value in refining, and the search for business models are examined. The top 25 US companies and US refining business groups are listed

  11. Hand-held ultrasound serving three EDs.

    Science.gov (United States)

    2007-02-01

    Having a portable ultrasound available to your ED will enable you to perform scans during the nighttime hours, instead of having patients wait for several hours until the radiology department opens. Additional time can be saved by having a technologist read the scans, which frees your ED physicians for other duties. Having ED docs contact the technologist directly, rather than going through a resident, also saves valuable time. Arriving at a diagnosis more quickly provides a boost to patient safety.

  12. Cabaña ED

    Directory of Open Access Journals (Sweden)

    Lorena Troncoso Valencia

    2018-01-01

    Full Text Available Este proyecto denominado Cabaña Ed, de la arquitecta chilena Lorena Troncoso Valencia, es parte de una serie de obras emplazadas en la comuna de Pinto, Región de Ñuble de Chile. Zona de frondosa vegetación de árboles autóctonos y con fugas visuales hacia la cordillera de los Andes. La Cabaña Ed, donde predomina el uso de la madera, se integra muy sutilmente con ese entorno natural. Cabin ED, by the Chilean architect Lorena Troncoso Valencia, is part of a series of works located in the commune of Pinto, Ñuble Region, Chile. This area is characterized by lush vegetation of native trees and visual towards the Andes leaks. In this project the use of wood predominates, which is subtly integrated with the natural environment. In the edition of REVISTARQUIS 11, another project of the architect, located in that same zone of tourist development was presented.

  13. On the quantitativeness of EDS STEM

    Energy Technology Data Exchange (ETDEWEB)

    Lugg, N.R. [Institute of Engineering Innovation, The University of Tokyo, 2-11-16, Yayoi, Bunkyo-ku, Tokyo 113-8656 (Japan); Kothleitner, G. [Institute for Electron Microscopy and Nanoanalysis, Graz University of Technology, Steyrergasse 17, 8010 Graz (Austria); Centre for Electron Microscopy, Steyrergasse 17, 8010 Graz (Austria); Shibata, N.; Ikuhara, Y. [Institute of Engineering Innovation, The University of Tokyo, 2-11-16, Yayoi, Bunkyo-ku, Tokyo 113-8656 (Japan)

    2015-04-15

    Chemical mapping using energy dispersive X-ray spectroscopy (EDS) in scanning transmission electron microscopy (STEM) has recently shown to be a powerful technique in analyzing the elemental identity and location of atomic columns in materials at atomic resolution. However, most applications of EDS STEM have been used only to qualitatively map whether elements are present at specific sites. Obtaining calibrated EDS STEM maps so that they are on an absolute scale is a difficult task and even if one achieves this, extracting quantitative information about the specimen – such as the number or density of atoms under the probe – adds yet another layer of complexity to the analysis due to the multiple elastic and inelastic scattering of the electron probe. Quantitative information may be obtained by comparing calibrated EDS STEM with theoretical simulations, but in this case a model of the structure must be assumed a priori. Here we first theoretically explore how exactly elastic and thermal scattering of the probe confounds the quantitative information one is able to extract about the specimen from an EDS STEM map. We then show using simulation how tilting the specimen (or incident probe) can reduce the effects of scattering and how it can provide quantitative information about the specimen. We then discuss drawbacks of this method – such as the loss of atomic resolution along the tilt direction – but follow this with a possible remedy: precession averaged EDS STEM mapping. - Highlights: • Signal obtained in EDS STEM maps (of STO) compared to non-channelling signal. • Deviation from non-channelling signal occurs in on-axis experiments. • Tilting specimen: signal close to non-channelling case but atomic resolution is lost. • Tilt-precession series: non-channelling signal and atomic-resolution features obtained. • Associated issues are discussed.

  14. Southeast Asian oil markets and refining

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, N.D. [FACTS, Inc., Honolulu, Hawaii (United States)

    1999-09-01

    An overview of the Southeast Asian oil markets and refining is presented concentrating on Brunei, Malaysia, the Philippines, Singapore and Thailand refiners. Key statistics of the refiners in this region are tabulated. The demand and the quality of Indonesian, Malaysian, Philippine, Singapore and Thai petroleum products are analysed. Crude distillation unit capacity trends in the Southeastern Asian refining industry are discussed along with cracking to distillation ratios, refining in these countries, and the impact of changes in demand and refining on the product trade.

  15. Southeast Asian oil markets and refining

    International Nuclear Information System (INIS)

    Yamaguchi, N.D.

    1999-01-01

    An overview of the Southeast Asian oil markets and refining is presented concentrating on Brunei, Malaysia, the Philippines, Singapore and Thailand refiners. Key statistics of the refiners in this region are tabulated. The demand and the quality of Indonesian, Malaysian, Philippine, Singapore and Thai petroleum products are analysed. Crude distillation unit capacity trends in the Southeastern Asian refining industry are discussed along with cracking to distillation ratios, refining in these countries, and the impact of changes in demand and refining on the product trade

  16. Transient data acquisition techniques under EDS

    International Nuclear Information System (INIS)

    Telford, S.

    1985-06-01

    This paper is the first of a series which describes the Enrichment Diagnostic System (EDS) developed for the MARS project at Lawrence Livermore National Laboratory. Although EDS was developed for use on AVLIS, the functional requirements, overall design, and specific techniques are applicable to any experimental data acquisition system involving large quantities of transient data. In particular this paper will discuss the techniques and equipment used to do the data acquisition. Included are what types of hardware are used and how that hardware (CAMAC, digital oscilloscopes) is interfaced to the HP computers. In this discussion the author will address the problems encountered and the solutions used, as well as the performance of the instrument/computer interfaces. The second topic the author will discuss is how the acquired data is associated to graphics and analysis portions of EDS through efficient real time data bases. This discussion will include how the acquired data is folded into the overall structure of EDS providing the user immediate access to raw and analyzed data. By example you will see how easily a new diagnostic can be added to the EDS structure without modifying the other parts of the system. 8 figs

  17. Effect of strontium on the grain refining efficiency of Mg-3Al alloy refined by carbon inoculation

    International Nuclear Information System (INIS)

    Du Jun; Yang Jian; Kuwabara, Mamoru; Li Wenfang; Peng Jihua

    2009-01-01

    The effect of Sr on the grain refining efficiency of the Mg-3Al alloy refined by carbon inoculation has been investigated in the present study. A significant grain refinement was obtained for the Mg-3Al alloy treated with either 0.2% C or 0.2% Sr. The Al-C-O particles were found in the sample refined by 0.2% C, and the element O should come from reaction between Al 4 C 3 nuclei of Mg grains and water during the process of sample preparation. The grain size of the sample refined by carbon inoculation was further decreased after the combined addition of Sr. The grain size decreased with increasing Sr content. Much higher refining efficiency was obtained when the Sr addition was increased to 0.5%. Sr is an effective element to improve the grain refining efficiency for the Mg-Al alloys refined by carbon inoculation. The number of Al 4 C 3 particles in the sample refined by the combination of carbon and Sr was more than that in the sample refined by only carbon. No Al-C-O-Sr-rich particles were obviously found in the sample refined by the combination of carbon and a little (<0.5%) Sr addition

  18. Linearly Refined Session Types

    Directory of Open Access Journals (Sweden)

    Pedro Baltazar

    2012-11-01

    Full Text Available Session types capture precise protocol structure in concurrent programming, but do not specify properties of the exchanged values beyond their basic type. Refinement types are a form of dependent types that can address this limitation, combining types with logical formulae that may refer to program values and can constrain types using arbitrary predicates. We present a pi calculus with assume and assert operations, typed using a session discipline that incorporates refinement formulae written in a fragment of Multiplicative Linear Logic. Our original combination of session and refinement types, together with the well established benefits of linearity, allows very fine-grained specifications of communication protocols in which refinement formulae are treated as logical resources rather than persistent truths.

  19. Ed Watson 1940-2006

    CERN Multimedia

    2006-01-01

    Ed Watson arrived at CERN in March 1973 to work on digital electronics and CAMAC systems under Bob Dobinson, after many years at Rolls Royce in Scotland. He joined the European Muon Collaboration in 1976, where he played a major role in the design, deployment and running of its data acquisition system (DAQ) with David Botterill, Bob Dobinson, and Vicky White. The CAMAC-ROMULUS system was by far the largest and most advanced of its time, and it became a defining standard for DAQ systems for years to come. Ed was deeply involved in the detailed planning of the control rooms and the experiment cabling, as well as sharing the responsibility for the CAMAC readout system. He had a real talent for trouble shooting and played a vital part in supporting the experiment throughout its lifetime. He offered great moral support to the younger members of the collaboration and helped them a great deal with their work. The EMC had a wonderful social life to which Ed was a major contributor - who can forget its barbecues?  In...

  20. Ed Watson - 1940-2006

    CERN Multimedia

    2006-01-01

    Ed Watson passed away suddenly on 1 August in Geneva, he was 66. He leaves his wife and two children. Ed Watson arrived at CERN in March 1973 to work on digital electronics and CAMAC systems under Bob Dobinson, after many years at Rolls Royce in Scotland. He joined the European Muon Collaboration in 1976, where he played a major role in the design, deployment and running of its data acquisition system (DAQ) with David Botterill, Bob Dobinson, and Vicky White. The CAMAC-ROMULUS system was by far the largest and most advanced of its time, and it became a defining standard for DAQ systems for years to come. Ed was deeply involved in the detailed planning of the control rooms and the experiment cabling, as well as sharing the responsibility for the CAMAC readout system. He had a real talent for trouble shooting and played a vital part in supporting the experiment throughout its lifetime. He offered great moral support to the younger members of the collaboration and helped them a great deal with their work. The...

  1. Commercial refining in the Mediterranean

    International Nuclear Information System (INIS)

    Packer, P.

    1999-01-01

    About 9% of the world's oil refining capacity is on the Mediterranean: some of the world's biggest and most advanced refineries are on Sicily and Sardinia. The Mediterranean refineries are important suppliers to southern Europe and N. Africa. The article discusses commercial refining in the Mediterranean under the headings of (i) historic development, (ii) product demand, (iii) refinery configurations, (iv) refined product trade, (v) financial performance and (vi) future outlook. Although some difficulties are foreseen, refining in the Mediterranean is likely to continue to be important well into the 21st century. (UK)

  2. Refining Nodes and Edges of State Machines

    DEFF Research Database (Denmark)

    Hallerstede, Stefan; Snook, Colin

    2011-01-01

    State machines are hierarchical automata that are widely used to structure complex behavioural specifications. We develop two notions of refinement of state machines, node refinement and edge refinement. We compare the two notions by means of examples and argue that, by adopting simple conventions...... refinement theory and UML-B state machine refinement influences the style of node refinement. Hence we propose a method with direct proof of state machine refinement avoiding the detour via Event-B that is needed by UML-B....

  3. ED leadership competency matrix: an administrative management tool.

    Science.gov (United States)

    Propp, Douglas A; Glickman, Seth; Uehara, Dennis T

    2003-10-01

    A successful ED relies on its leaders to master and demonstrate core competencies to be effective in the many arenas in which they interact and are responsible. A unique matrix model for the assessment of an ED leadership's key administrative skill sets is presented. The model incorporates capabilities related to the individual's cognitive aptitude, experience, acquired technical skills, behavioral characteristics, as well as the ability to manage relationships effectively. Based on the personnel inventory using the matrix, focused evaluation, development, and recruitment of ED key leaders occurs. This dynamic tool has provided a unique perspective for the evaluation and enhancement of overall ED leadership performance. It is hoped that incorporation of such a model will similarly improve the accomplishments of EDs at other institutions.

  4. Anomalies in the refinement of isoleucine

    International Nuclear Information System (INIS)

    Berntsen, Karen R. M.; Vriend, Gert

    2014-01-01

    The side-chain torsion angles of isoleucines in X-ray protein structures are a function of resolution, secondary structure and refinement software. Detailing the standard torsion angles used in refinement software can improve protein structure refinement. A study of isoleucines in protein structures solved using X-ray crystallography revealed a series of systematic trends for the two side-chain torsion angles χ 1 and χ 2 dependent on the resolution, secondary structure and refinement software used. The average torsion angles for the nine rotamers were similar in high-resolution structures solved using either the REFMAC, CNS or PHENIX software. However, at low resolution these programs often refine towards somewhat different χ 1 and χ 2 values. Small systematic differences can be observed between refinement software that uses molecular dynamics-type energy terms (for example CNS) and software that does not use these terms (for example REFMAC). Detailing the standard torsion angles used in refinement software can improve the refinement of protein structures. The target values in the molecular dynamics-type energy functions can also be improved

  5. Anomalies in the refinement of isoleucine

    Energy Technology Data Exchange (ETDEWEB)

    Berntsen, Karen R. M.; Vriend, Gert, E-mail: gerrit.vriend@radboudumc.nl [Radboud University Medical Center, Geert Grooteplein 26-28, 6525 GA Nijmegen (Netherlands)

    2014-04-01

    The side-chain torsion angles of isoleucines in X-ray protein structures are a function of resolution, secondary structure and refinement software. Detailing the standard torsion angles used in refinement software can improve protein structure refinement. A study of isoleucines in protein structures solved using X-ray crystallography revealed a series of systematic trends for the two side-chain torsion angles χ{sub 1} and χ{sub 2} dependent on the resolution, secondary structure and refinement software used. The average torsion angles for the nine rotamers were similar in high-resolution structures solved using either the REFMAC, CNS or PHENIX software. However, at low resolution these programs often refine towards somewhat different χ{sub 1} and χ{sub 2} values. Small systematic differences can be observed between refinement software that uses molecular dynamics-type energy terms (for example CNS) and software that does not use these terms (for example REFMAC). Detailing the standard torsion angles used in refinement software can improve the refinement of protein structures. The target values in the molecular dynamics-type energy functions can also be improved.

  6. Grain refinement of zinc-aluminium alloys

    International Nuclear Information System (INIS)

    Zaid, A.I.O.

    2006-01-01

    It is now well-established that the structure of the zinc-aluminum die casting alloys can be modified by the binary Al-Ti or the ternary Al-Ti-B master alloys. in this paper, grain refinement of zinc-aluminum alloys by rare earth materials is reviewed and discussed. The importance of grain refining of these alloys and parameters affecting it are presented and discussed. These include parameters related to the Zn-Al alloys cast, parameters related to the grain refining elements or alloys and parameters related to the process. The effect of addition of other alloying elements e.g. Zr either alone or in the presence of the main grain refiners Ti or Ti + B on the grain refining efficiency is also reviewed and discussed. Furthermore, based on the grain refinement and the parameters affecting it, a criterion for selection of the optimum grain refiner is suggested. Finally, the recent research work on the effect of grain refiners on the mechanical behaviour, impact strength, wear resistance, and fatigue life of these alloys are presented and discussed. (author)

  7. More countries in recession: Oil supply looking for demand

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Crude oil prices fell dramatically during the fourth quarter of 1992. Refiners are reevaluating their positions to adjust to low demand growth worldwide. The only bright spot appears to be the United States' emergence from its economic recession. However, Japan and Germany are experiencing their own economic recessions, and crude oil supplies show no sign of tightening. Crude oil futures prices have fallen by more than 15% as of January 8, 1993 compared to October 1, 1992. Although the American Petroleum Institute (API) found increases in oil demand during October and November 1992, the increases are attributed to colder weather and the weak 1991 demand that was used for comparison. This issue identifies current factors at work affecting U.S. refining margins and product values, and offers a first quarter 1993 outlook. All data featured in graphs and text come from the Energy detente Refinery Netback Data Series published in each issue, in which gasoline and diesel No. 2 are Lundberg Survey unbranded racks instead of spot quotations. Margins are apparent deltas only and do not reflect actual profits for any individual operation

  8. Refining and petrochemicals

    Energy Technology Data Exchange (ETDEWEB)

    Constancio, Silva

    2006-07-01

    In 2004, refining margins showed a clear improvement that persisted throughout the first three quarters of 2005. This enabled oil companies to post significantly higher earnings for their refining activity in 2004 compared to 2003, with the results of the first half of 2005 confirming this trend. As for petrochemicals, despite a steady rise in the naphtha price, higher cash margins enabled a turnaround in 2004 as well as a clear improvement in oil company financial performance that should continue in 2005, judging by the net income figures reported for the first half-year. Despite this favorable business environment, capital expenditure in refining and petrochemicals remained at a low level, especially investment in new capacity, but a number of projects are being planned for the next five years. (author)

  9. Refining and petrochemicals

    International Nuclear Information System (INIS)

    Constancio, Silva

    2006-01-01

    In 2004, refining margins showed a clear improvement that persisted throughout the first three quarters of 2005. This enabled oil companies to post significantly higher earnings for their refining activity in 2004 compared to 2003, with the results of the first half of 2005 confirming this trend. As for petrochemicals, despite a steady rise in the naphtha price, higher cash margins enabled a turnaround in 2004 as well as a clear improvement in oil company financial performance that should continue in 2005, judging by the net income figures reported for the first half-year. Despite this favorable business environment, capital expenditure in refining and petrochemicals remained at a low level, especially investment in new capacity, but a number of projects are being planned for the next five years. (author)

  10. TechEdSat

    Data.gov (United States)

    National Aeronautics and Space Administration — TechEdSat is a 1U CubeSat built by San Jose State University in partnership with NASA Ames Research Center and AAC Microtec. Its mission is to evaluate Space...

  11. Grain refinement of aluminum and its alloys

    International Nuclear Information System (INIS)

    Zaid, A.I.O.

    2001-01-01

    Grain refinement of aluminum and its alloys by the binary Al-Ti and Ternary Al-Ti-B master alloys is reviewed and discussed. The importance of grain refining to the cast industry and the parameters affecting it are presented and discussed. These include parameters related to the cast, parameters related to the grain refining alloy and parameters related to the process. The different mechanisms, suggested in the literature for the process of grain refining are presented and discussed, from which it is found that although the mechanism of refining by the binary Al-Ti is well established the mechanism of grain refining by the ternary Al-Ti-B is still a controversial matter and some research work is still needed in this area. The effect of the addition of other alloying elements in the presence of the grain refiner on the grain refining efficiency is also reviewed and discussed. It is found that some elements e.g. V, Mo, C improves the grain refining efficiency, whereas other elements e.g. Cr, Zr, Ta poisons the grain refinement. Based on the parameters affecting the grain refinement and its mechanism, a criterion for selection of the optimum grain refiner is forwarded and discussed. (author)

  12. TechEdSat Nano-Satellite Series Fact Sheet

    Science.gov (United States)

    Murbach, Marcus; Martinez, Andres; Guarneros Luna, Ali

    2014-01-01

    TechEdSat-3p is the second generation in the TechEdSat-X series. The TechEdSat Series uses the CubeSat standards established by the California Polytechnic State University Cal Poly), San Luis Obispo. With typical blocks being constructed from 1-unit (1U 10x10x10 cm) increments, the TechEdSat-3p has a 3U volume with a 30 cm length. The project uniquely pairs advanced university students with NASA researchers in a rapid design-to-flight experience lasting 1-2 semesters.The TechEdSat Nano-Satellite Series provides a rapid platform for testing technologies for future NASA Earth and planetary missions, as well as providing students with an early exposure to flight hardware development and management.

  13. Economic strategies to maximize profits from satellite field developments

    International Nuclear Information System (INIS)

    Antia, D.D.J.

    1994-01-01

    The main strategies that can be used to maximize profits from integrated satellite field developments are: (1) restructuring the cost, production and revenue profile of the satellite field; and (2) increasing the volume of oil/gas processed, and available for future use, by the central processing and distribution facility through: (a) using a combined strategy of low tariffs, volume discount, and netback agreements; (b) using reusable facilities, shared facilities, extended reach wells, contractor finance, partnering agreements, netback agreements, oil/gas price swaps; and (c) improving development, discovery and exploration efficiency

  14. Niobium-base grain refiner for aluminium

    International Nuclear Information System (INIS)

    Silva Pontes, P. da; Robert, M.H.; Cupini, N.L.

    1980-01-01

    A new chemical grain refiner for aluminium has been developed, using inoculation of a niobium-base compound. When a bath of molten aluminium is inoculated whith this refiner, an intermetallic aluminium-niobium compound is formed which acts as a powerful nucleant, producing extremely fine structure comparable to those obtained by means of the traditional grain refiner based on titanium and boron. It was found that the refinement of the structure depends upon the weight percentage of the new refiner inoculated as well as the time of holding the bath after inoculation and before pouring, but mainly on the inoculating temperature. (Author) [pt

  15. Indian refining industry

    International Nuclear Information System (INIS)

    Singh, I.J.

    2002-01-01

    The author discusses the history of the Indian refining industry and ongoing developments under the headings: the present state; refinery configuration; Indian capabilities for refinery projects; and reforms in the refining industry. Tables lists India's petroleum refineries giving location and capacity; new refinery projects together with location and capacity; and expansion projects of Indian petroleum refineries. The Indian refinery industry has undergone substantial expansion as well as technological changes over the past years. There has been progressive technology upgrading, energy efficiency, better environmental control and improved capacity utilisation. Major reform processes have been set in motion by the government of India: converting the refining industry from a centrally controlled public sector dominated industry to a delicensed regime in a competitive market economy with the introduction of a liberal exploration policy; dismantling the administered price mechanism; and a 25 year hydrocarbon vision. (UK)

  16. Spanish Refining

    International Nuclear Information System (INIS)

    Lores, F.R.

    2001-01-01

    An overview of petroleum refining in Spain is presented (by Repsol YPF) and some views on future trends are discussed. Spain depends heavily on imports. Sub-headings in the article cover: sources of crude imports, investments and logistics and marketing, -detailed data for each are shown diagrammatically. Tables show: (1) economic indicators (e.g. total GDP, vehicle numbers and inflation) for 1998-200; (2) crude oil imports for 1995-2000; (3) oil products balance for 1995-2000; (4) commodities demand, by product; (5) refining in Spain in terms of capacity per region; (6) outlets in Spain and other European countries in 2002 and (7) sales distribution channel by product

  17. The ED use and non-urgent visits of elderly patients.

    Science.gov (United States)

    Gulacti, Umut; Lok, Ugur; Celik, Murat; Aktas, Nurettin; Polat, Haci

    2016-12-01

    To evaluate the use of the emergency department (ED) by elderly patients, their non-urgent visits and the prevalence of main disease for ED visits. This cross-sectional study was conducted on patients aged 65 years and over who visited the ED of a tertiary care university hospital in Turkey between January 2015 and January 2016 retrospectively. A total of 36,369 elderly patients who visited the ED were included in the study. The rate of ED visits by elderly patients was higher than their representation within the general population (p elderly patients visiting polyclinics was 15.8%, the rate of elderly patients visiting the ED was 24.3% (p elderly age groups (p elderly population (17.5%, CI: 17.1-17.9). The proportion of ED visits for non-urgent conditions was 23.4%. Most of the ED visits were during the non-business hours (51.1%), and they were highest in the winter season (25.9%) and in January (10.2%). The hospitalization rate was 9.4%, and 37.9% of hospitalized patients were admitted to intensive care units. The proportion of ED visits by elderly patients was higher than their representation within the general population. Elderly patients often visited the ED instead of a polyclinic. The rate of inappropriate ED use by elderly patients in this hospital was higher than in other countries.

  18. ED breast cases and other breast emergencies.

    Science.gov (United States)

    Khadem, Nasim; Reddy, Sravanthi; Lee, Sandy; Larsen, Linda; Walker, Daphne

    2016-02-01

    Patients with pathologic processes of the breast commonly present in the Emergency Department (ED). Familiarity with the imaging and management of the most common entities is essential for the radiologist. Additionally, it is important to understand the limitations of ED imaging and management in the acute setting and to recognize when referrals to a specialty breast center are necessary. The goal of this article is to review the clinical presentations, pathophysiology, imaging, and management of emergency breast cases and common breast pathology seen in the ED.

  19. Comparing Refinements for Failure and Bisimulation Semantics

    NARCIS (Netherlands)

    Eshuis, H.; Fokkinga, M.M.

    2002-01-01

    Refinement in bisimulation semantics is defined differently from refinement in failure semantics: in bisimulation semantics refinement is based on simulations between labelled transition systems, whereas in failure semantics refinement is based on inclusions between failure systems. There exist

  20. Crystal structure refinement with SHELXL

    Energy Technology Data Exchange (ETDEWEB)

    Sheldrick, George M., E-mail: gsheldr@shelx.uni-ac.gwdg.de [Department of Structural Chemistry, Georg-August Universität Göttingen, Tammannstraße 4, Göttingen 37077 (Germany)

    2015-01-01

    New features added to the refinement program SHELXL since 2008 are described and explained. The improvements in the crystal structure refinement program SHELXL have been closely coupled with the development and increasing importance of the CIF (Crystallographic Information Framework) format for validating and archiving crystal structures. An important simplification is that now only one file in CIF format (for convenience, referred to simply as ‘a CIF’) containing embedded reflection data and SHELXL instructions is needed for a complete structure archive; the program SHREDCIF can be used to extract the .hkl and .ins files required for further refinement with SHELXL. Recent developments in SHELXL facilitate refinement against neutron diffraction data, the treatment of H atoms, the determination of absolute structure, the input of partial structure factors and the refinement of twinned and disordered structures. SHELXL is available free to academics for the Windows, Linux and Mac OS X operating systems, and is particularly suitable for multiple-core processors.

  1. Erectile Dysfunction (ED)

    Science.gov (United States)

    ... Talking to Your Kids About VirginityTalking to Your Kids About Sex Home Diseases and Conditions Erectile Dysfunction (ED) Condition ... Well-Being Mental Health Sex and Birth Control Sex and Sexuality Birth Control ... and Toddlers Kids and Teens Pregnancy and Childbirth Women Men Seniors ...

  2. Latin American oil markets and refining

    International Nuclear Information System (INIS)

    Yamaguchi, N.D.; Obadia, C.

    1999-01-01

    This paper provides an overview of the oil markets and refining in Argentina, Brazil, Chile, Colombia, Ecuador, Mexico, Peru and Venezuela, and examines the production of crude oil in these countries. Details are given of Latin American refiners highlighting trends in crude distillation unit capacity, cracking to distillation ratios, and refining in the different countries. Latin American oil trade is discussed, and charts are presented illustrating crude production, oil consumption, crude refining capacity, cracking to distillation ratios, and oil imports and exports

  3. The ED use and non-urgent visits of elderly patients

    Directory of Open Access Journals (Sweden)

    Umut Gulacti

    2016-12-01

    Full Text Available Objective: To evaluate the use of the emergency department (ED by elderly patients, their non-urgent visits and the prevalence of main disease for ED visits. Methods: This cross-sectional study was conducted on patients aged 65 years and over who visited the ED of a tertiary care university hospital in Turkey between January 2015 and January 2016 retrospectively. Results: A total of 36,369 elderly patients who visited the ED were included in the study. The rate of ED visits by elderly patients was higher than their representation within the general population (p < 0.001. While the rate of elderly patients visiting polyclinics was 15.8%, the rate of elderly patients visiting the ED was 24.3% (p < 0.001. For both genders, the rates of ED visits for patients between 65 and 74 years old was higher than for other elderly age groups (p < 0.001. The prevalence of upper respiratory tract infection (URTI was the highest within the elderly population (17.5%, CI: 17.1–17.9. The proportion of ED visits for non-urgent conditions was 23.4%. Most of the ED visits were during the non-business hours (51.1%, and they were highest in the winter season (25.9% and in January (10.2%. The hospitalization rate was 9.4%, and 37.9% of hospitalized patients were admitted to intensive care units. Conclusion: The proportion of ED visits by elderly patients was higher than their representation within the general population. Elderly patients often visited the ED instead of a polyclinic. The rate of inappropriate ED use by elderly patients in this hospital was higher than in other countries. Keywords: Non-urgent, Prevalence, Visit, Main disease, Elderly patient, Emergency department

  4. Relational Demonic Fuzzy Refinement

    Directory of Open Access Journals (Sweden)

    Fairouz Tchier

    2014-01-01

    Full Text Available We use relational algebra to define a refinement fuzzy order called demonic fuzzy refinement and also the associated fuzzy operators which are fuzzy demonic join (⊔fuz, fuzzy demonic meet (⊓fuz, and fuzzy demonic composition (□fuz. Our definitions and properties are illustrated by some examples using mathematica software (fuzzy logic.

  5. Hearing of Mr. Francois Roussely, President of EdF

    International Nuclear Information System (INIS)

    Roussely, F.

    2005-01-01

    This document is the proceedings of the hearing of F. Roussely, President of Electricite de France (EdF), at the commission of economic affairs of the French house of commons, about the advisability of the construction of the EPR (European pressurized reactor) demonstration plant and about its possible financing by EdF. In a first part, F. Roussely recalls the European context of deregulation of energy markets and its impact of the French electric power industry (opening of the French market, industrial and social actions of EdF, need of a new generation of nuclear reactor, preservation of EdF's energy mix, warranty of public utility, un-bundling between energy trade and distribution, EdF's turnover and profitability, EdF's foreign daughter companies). In a second part, F. Roussely answers a series of questions asked by the different members of the commission concerning the different points presented in the first part. (J.S.)

  6. Panorama 2012 - Refining 2030

    International Nuclear Information System (INIS)

    Marion, Pierre; Saint-Antonin, Valerie

    2011-11-01

    The major uncertainty characterizing the global energy landscape impacts particularly on transport, which remains the virtually-exclusive bastion of the oil industry. The industry must therefore respond to increasing demand for mobility against a background marked by the emergence of alternatives to oil-based fuels and the need to reduce emissions of pollutants and greenhouse gases (GHG). It is in this context that the 'Refining 2030' study conducted by IFP Energies Nouvelles (IFPEN) forecasts what the global supply and demand balance for oil products could be, and highlights the type and geographical location of the refinery investment required. Our study shows that the bulk of the refining investment will be concentrated in the emerging countries (mainly those in Asia), whilst the areas historically strong in refining (Europe and North America) face reductions in capacity. In this context, the drastic reduction in the sulphur specification of bunker oil emerges as a structural issue for European refining, in the same way as increasingly restrictive regulation of refinery CO 2 emissions (quotas/taxation) and the persistent imbalance between gasoline and diesel fuels. (authors)

  7. The ED use and non-urgent visits of elderly patients

    OpenAIRE

    Gulacti, Umut; Lok, Ugur; Celik, Murat; Aktas, Nurettin; Polat, Haci

    2016-01-01

    Objective: To evaluate the use of the emergency department (ED) by elderly patients, their non-urgent visits and the prevalence of main disease for ED visits. Methods: This cross-sectional study was conducted on patients aged 65 years and over who visited the ED of a tertiary care university hospital in Turkey between January 2015 and January 2016 retrospectively. Results: A total of 36,369 elderly patients who visited the ED were included in the study. The rate of ED visits by elderly patien...

  8. Refining margins and prospects

    International Nuclear Information System (INIS)

    Baudouin, C.; Favennec, J.P.

    1997-01-01

    Refining margins throughout the world have remained low in 1996. In Europe, in spite of an improvement, particularly during the last few weeks, they are still not high enough to finance new investments. Although the demand for petroleum products is increasing, experts are still sceptical about any rapid recovery due to prevailing overcapacity and to continuing capacity growth. After a historical review of margins and an analysis of margins by regions, we analyse refining over-capacities in Europe and the unbalances between production and demand. Then we discuss the current situation concerning barriers to the rationalization, agreements between oil companies, and the consequences on the future of refining capacities and margins. (author)

  9. The Impact of "ED" on Educational Research.

    Science.gov (United States)

    Florio, David H.

    1980-01-01

    The purposes, structure, and component parts of the newly formed Department of Education (ED) organizations from which educational research programs will be administered are discussed. As the climate surrounding ED changes, opportunities to take advantage of the elevated status of research will be presented. (Author/RL)

  10. Emergency Department (ED, ED Observation, Day Hospital, and Hospital Admissions for Adults with Sickle Cell Disease

    Directory of Open Access Journals (Sweden)

    Susan Silva

    2018-02-01

    Full Text Available Introduction: Use of alternative venues to manage uncomplicated vaso-occlusive crisis (VOC, such as a day hospital (DH or ED observation unit, for patients with sickle cell anemia, may significantly reduce admission rates, which may subsequently reduce 30-day readmission rates. Methods: In the context of a two-institution quality improvement project to implement best practices for management of patients with sickle cell disease (SCD VOC, we prospectively compared acute care encounters for utilization of 1 emergency department (ED; 2 ED observation unit; 3 DH, and 4 hospital admission, of two different patient cohorts with SCD presenting to our two study sites. Using a representative sample of patients from each institution, we also tabulated SCD patient visits or admissions to outside hospitals within 20 miles of the patients’ home institutions. Results: Over 30 months 427 patients (297 at Site 1 and 130 at Site 2 initiated 4,740 institutional visits, totaling 6,627 different acute care encounters, including combinations of encounters. The range of encounters varied from a low of 0 (203 of 500 patients [40.6%] at Site 1; 65 of 195 patients [33.3%] at Site 2, and a high of 152 (5/month acute care encounters for one patient at Site 2. Patients at Site 2 were more likely to be admitted to the hospital during the study period (88.4% vs. 74.4%, p=0.0011 and have an ED visit (96.9% vs. 85.5%, p=0.0002. DH was used more frequently at Site 1 (1.207 encounters for 297 patients at Site 1, vs. 199 encounters for 130 patients at Site 2, and ED observation was used at Site 1 only. Thirty-five percent of patients visited hospitals outside their home academic center. Conclusion: In this 30-month assessment of two sickle cell cohorts, healthcare utilization varied dramatically between individual patients. One cohort had more hospital admissions and ED encounters, while the other cohort had more day hospital encounters and used a sickle cell disease

  11. Refinement Types for TypeScript

    OpenAIRE

    Vekris, Panagiotis; Cosman, Benjamin; Jhala, Ranjit

    2016-01-01

    We present Refined TypeScript (RSC), a lightweight refinement type system for TypeScript, that enables static verification of higher-order, imperative programs. We develop a formal core of RSC that delineates the interaction between refinement types and mutability. Next, we extend the core to account for the imperative and dynamic features of TypeScript. Finally, we evaluate RSC on a set of real world benchmarks, including parts of the Octane benchmarks, D3, Transducers, and the TypeScript co...

  12. Neutron Powder Diffraction and Constrained Refinement

    DEFF Research Database (Denmark)

    Pawley, G. S.; Mackenzie, Gordon A.; Dietrich, O. W.

    1977-01-01

    The first use of a new program, EDINP, is reported. This program allows the constrained refinement of molecules in a crystal structure with neutron diffraction powder data. The structures of p-C6F4Br2 and p-C6F4I2 are determined by packing considerations and then refined with EDINP. Refinement is...

  13. Refined geometric transition and qq-characters

    Science.gov (United States)

    Kimura, Taro; Mori, Hironori; Sugimoto, Yuji

    2018-01-01

    We show the refinement of the prescription for the geometric transition in the refined topological string theory and, as its application, discuss a possibility to describe qq-characters from the string theory point of view. Though the suggested way to operate the refined geometric transition has passed through several checks, it is additionally found in this paper that the presence of the preferred direction brings a nontrivial effect. We provide the modified formula involving this point. We then apply our prescription of the refined geometric transition to proposing the stringy description of doubly quantized Seiberg-Witten curves called qq-characters in certain cases.

  14. EDS Coal Liquefaction Process Development. Phase V. Laboratory evaluation of the characteristics of EDS Illinois bottoms

    Energy Technology Data Exchange (ETDEWEB)

    Lao, T C; Levasseur, A A

    1984-02-01

    This interim report documents work carried out by Combustion Engineering, Inc. under a contract to Exxon Research and Engineering Company to develop a conceptual Hybrid Boiler design fueled by the vacuum distillation residue (vacuum bottoms) derived from Illinois No. 6 coal in the EDS Coal Liquefaction Process. This report was prepared by Combustion Engineering, Inc., and is the first of two reports on the predevelopment phase of the Hybrid Boiler program. This report covers the results of a laboratory investigation to assess the fuel and ash properties of EDS vacuum bottoms. The results of the laboratory testing reported here were used in conjunction with Combustion Engineering's design experience to predict fuel performance and to develop appropriate boiler design parameters. These boiler design parameters were used to prepare the engineering design study reported in EDS Interim Report FE-2893-113, the second of the two reports on the predevelopment phase of the Hybrid Boiler Program. 46 figures, 29 tables.

  15. Ed overcrowding – matematic models for integrated solutions and decisions

    OpenAIRE

    ROTARU, LUCIANA TEODORA; BĂNICIOIU - COVEI, MIHAI

    2017-01-01

    Dear Editor In Chief, We are writing to You in line with an very interesting point of view regarding the Emergency Department (ED) development. The paper titled Improving Emergency Department Capacity Efficiency, published in your Journal 2016; 12(1): 52- 57, as an original articles, spotlight solution for ED crowding. So we are proposing a mathematics models for reciprocal accommodation of patients flows to the response capacity of the ED. ED overcrowding ...

  16. On Modal Refinement and Consistency

    DEFF Research Database (Denmark)

    Nyman, Ulrik; Larsen, Kim Guldstrand; Wasowski, Andrzej

    2007-01-01

    Almost 20 years after the original conception, we revisit several fundamental question about modal transition systems. First, we demonstrate the incompleteness of the standard modal refinement using a counterexample due to Hüttel. Deciding any refinement, complete with respect to the standard...

  17. Refining - Panorama 2008

    International Nuclear Information System (INIS)

    2008-01-01

    Investment rallied in 2007, and many distillation and conversion projects likely to reach the industrial stage were announced. With economic growth sustained in 2006 and still pronounced in 2007, oil demand remained strong - especially in emerging countries - and refining margins stayed high. Despite these favorable business conditions, tensions persisted in the refining sector, which has fallen far behind in terms of investing in refinery capacity. It will take renewed efforts over a long period to catch up. Looking at recent events that have affected the economy in many countries (e.g. the sub-prime crisis), prudence remains advisable

  18. Refinement by interface instantiation

    DEFF Research Database (Denmark)

    Hallerstede, Stefan; Hoang, Thai Son

    2012-01-01

    be easily refined. Our first contribution hence is a proposal for a new construct called interface that encapsulates the external variables, along with a mechanism for interface instantiation. Using the new construct and mechanism, external variables can be refined consistently. Our second contribution...... is an approach for verifying the correctness of Event-B extensions using the supporting Rodin tool. We illustrate our approach by proving the correctness of interface instantiation....

  19. Electrostatic-Dipole (ED) Fusion Confinement Studies

    Science.gov (United States)

    Miley, George H.; Shrestha, Prajakti J.; Yang, Yang; Thomas, Robert

    2004-11-01

    The Electrostatic-Dipole (ED) concept significantly differs from a "pure" dipole confinement device [1] in that the charged particles are preferentially confined to the high-pressure region interior of the dipole coil by the assistance of a surrounding spherical electrostatic grid. In present ED experiments, a current carrying coil is embedded inside the grid of an IEC such as to produce a magnetic dipole field. Charged particles are injected axisymmetrically from an ion gun (or duo-plasmatron) into the center of the ED confinement grid/dipole ring where they oscillate along the magnetic field lines and pass the peak field region at the center of the dipole region. As particles begin accelerating away from the center region towards the outer electrostatic grid region, they encounter a strong electrostatic potential (order of 10's of kilovolts) retarding force. The particles then decelerate, reverse direction and re-enter the dipole field region where again magnetic confinement dominates. This process continues, emulating a complex harmonic oscillator motion. The resulting pressure profile averaged over the field curvature offers good plasma stability in the ED configuration. The basic concept and results from preliminary experiments will be described. [1] M.E. Mauel, et al. "Dipole Equilibrium and Stability," 18th IAEA Conference of Plasma Phys. and Control. Nuclear Fusion, Varenna, Italy 2000, IAEA-F1-CN-70/TH

  20. TaEDS1 genes positively regulate resistance to powdery mildew in wheat.

    Science.gov (United States)

    Chen, Guiping; Wei, Bo; Li, Guoliang; Gong, Caiyan; Fan, Renchun; Zhang, Xiangqi

    2018-04-01

    Three EDS1 genes were cloned from common wheat and were demonstrated to positively regulate resistance to powdery mildew in wheat. The EDS1 proteins play important roles in plant basal resistance and TIR-NB-LRR protein-triggered resistance in dicots. Until now, there have been very few studies on EDS1 in monocots, and none in wheat. Here, we report on three common wheat orthologous genes of EDS1 family (TaEDS1-5A, 5B and 5D) and their function in powdery mildew resistance. Comparisons of these genes with their orthologs in diploid ancestors revealed that EDS1 is a conserved gene family in Triticeae. The cDNA sequence similarity among the three TaEDS1 genes was greater than 96.5%, and they shared sequence similarities of more than 99.6% with the respective orthologs from diploid ancestors. The phylogenetic analysis revealed that the EDS1 family originated prior to the differentiation of monocots and dicots, and EDS1 members have since undergone clear structural differentiation. The transcriptional levels of TaEDS1 genes in the leaves were obviously higher than those of the other organs, and they were induced by Blumeria graminis f. sp. tritici (Bgt) infection and salicylic acid (SA) treatment. The BSMV-VIGS experiments indicated that knock-down the transcriptional levels of the TaEDS1 genes in a powdery mildew-resistant variety of common wheat compromised resistance. Contrarily, transient overexpression of TaEDS1 genes in a susceptible common wheat variety significantly reduced the haustorium index and attenuated the growth of Bgt. Furthermore, the expression of TaEDS1 genes in the Arabidopsis mutant eds1-1 complemented its susceptible phenotype to powdery mildew. The above evidences strongly suggest that TaEDS1 acts as a positive regulator and confers resistance against powdery mildew in common wheat.

  1. The relationship between viscosity and refinement efficiency of pure aluminum by Al-Ti-B refiner

    Energy Technology Data Exchange (ETDEWEB)

    Yu Lina [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, 73 Jingshi Road, Jinan 250061 (China); Liu Xiangfa [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, 73 Jingshi Road, Jinan 250061 (China)]. E-mail: xfliu@sdu.edu.cn

    2006-11-30

    The relationship between viscosity and refinement efficiency of pure aluminum with the addition of Al-Ti-B master alloy was studied in this paper. The experimental results show that when the grain size of solidified sample is finer the viscosity of the melt is higher after the addition of different Al-Ti-B master alloys. This indicates that viscosity can be used to approximately estimate the refinement efficiency of Al-Ti-B refiners in production to a certain extent. The main reason was also discussed in this paper by using transmission electron microscopy (TEM) analysis and differential scanning calorimetry (DSC) experiment.

  2. Relational Demonic Fuzzy Refinement

    OpenAIRE

    Tchier, Fairouz

    2014-01-01

    We use relational algebra to define a refinement fuzzy order called demonic fuzzy refinement and also the associated fuzzy operators which are fuzzy demonic join $({\\bigsqcup }_{\\mathrm{\\text{f}}\\mathrm{\\text{u}}\\mathrm{\\text{z}}})$ , fuzzy demonic meet $({\\sqcap }_{\\mathrm{\\text{f}}\\mathrm{\\text{u}}\\mathrm{\\text{z}}})$ , and fuzzy demonic composition $({\\square }_{\\mathrm{\\text{f}}\\mathrm{\\text{u}}\\mathrm{\\text{z}}})$ . Our definitions and properties are illustrated by some examples using ma...

  3. Moments of disaster response in the emergency department (ED).

    Science.gov (United States)

    Hammad, Karen S; Arbon, Paul; Gebbie, Kristine; Hutton, Alison

    2017-11-01

    We experience our lives as a series of memorable moments, some good and some bad. Undoubtedly, the experience of participating in disaster response, is likely to stand out as a memorable moment in a nurses' career. This presentation will describe five distinct moments of nursing in the emergency department (ED) during a disaster response. A Hermeneutic Phenomenological approach informed by van Manen underpins the research process. Thirteen nurses from different countries around the world participated in interviews about their experience of working in the ED during a disaster. Thematic analysis resulted in five moments of disaster response which are common to the collective participant experience. The 5 themes emerge as Notification (as a nurse finds out that the ED will be receiving casualties), Waiting (waiting for the patients to arrive to the ED), Patient Arrival (the arrival of the first patients to the ED), Caring for patients (caring for people affected by the disaster) and Reflection (the moment the disaster response comes to an end). This paper provides an in-depth insight into the experience of nursing in the ED during a disaster response which can help generate awareness and inform future disaster preparedness of emergency nurses. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  4. Panorama 2007: Refining and Petrochemicals

    International Nuclear Information System (INIS)

    Silva, C.

    2007-01-01

    The year 2005 saw a new improvement in refining margins that continued during the first three quarters of 2006. The restoration of margins in the last three years has allowed the refining sector to regain its profitability. In this context, the oil companies reported earnings for fiscal year 2005 that were up significantly compared to 2004, and the figures for the first half-year 2006 confirm this trend. Despite this favorable business environment, investments only saw a minimal increase in 2005 and the improvement expected for 2006 should remain fairly limited. Looking to 2010-2015, it would appear that the planned investment projects with the highest probability of reaching completion will be barely adequate to cover the increase in demand. Refining sector should continue to find itself under pressure. As for petrochemicals, despite a steady up-trend in the naphtha price, the restoration of margins consolidated a comeback that started in 2005. All in all, capital expenditure remained fairly low in both the refining and petrochemicals sectors, but many projects are planned for the next ten years. (author)

  5. 2003 annual results of EdF group

    International Nuclear Information System (INIS)

    2004-03-01

    The Electricite de France (EdF) group Board of Directors, meeting on March 11, 2004, under the Chairmanship of Francois Roussely, reviewed the audited consolidated financial statements for the year ended 12/31/2003. This document presents the consolidated results of EdF group for 2003: consolidated financial statements, highlights of the year, focus on 2003 events, commercial results, EDF in Europe and worldwide, EDF France highlights, key figures. (J.S.)

  6. Refining margins: recent trends

    International Nuclear Information System (INIS)

    Baudoin, C.; Favennec, J.P.

    1999-01-01

    Despite a business environment that was globally mediocre due primarily to the Asian crisis and to a mild winter in the northern hemisphere, the signs of improvement noted in the refining activity in 1996 were borne out in 1997. But the situation is not yet satisfactory in this sector: the low return on invested capital and the financing of environmental protection expenditure are giving cause for concern. In 1998, the drop in crude oil prices and the concomitant fall in petroleum product prices was ultimately rather favorable to margins. Two elements tended to put a damper on this relative optimism. First of all, margins continue to be extremely volatile and, secondly, the worsening of the economic and financial crisis observed during the summer made for a sharp decline in margins in all geographic regions, especially Asia. Since the beginning of 1999, refining margins are weak and utilization rates of refining capacities have decreased. (authors)

  7. Regional Energy Deployment System (ReEDS)

    Energy Technology Data Exchange (ETDEWEB)

    Short, W.; Sullivan, P.; Mai, T.; Mowers, M.; Uriarte, C.; Blair, N.; Heimiller, D.; Martinez, A.

    2011-12-01

    The Regional Energy Deployment System (ReEDS) is a deterministic optimization model of the deployment of electric power generation technologies and transmission infrastructure throughout the contiguous United States into the future. The model, developed by the National Renewable Energy Laboratory's Strategic Energy Analysis Center, is designed to analyze the critical energy issues in the electric sector, especially with respect to potential energy policies, such as clean energy and renewable energy standards or carbon restrictions. ReEDS provides a detailed treatment of electricity-generating and electrical storage technologies and specifically addresses a variety of issues related to renewable energy technologies, including accessibility and cost of transmission, regional quality of renewable resources, seasonal and diurnal generation profiles, variability of wind and solar power, and the influence of variability on the reliability of the electrical grid. ReEDS addresses these issues through a highly discretized regional structure, explicit statistical treatment of the variability in wind and solar output over time, and consideration of ancillary services' requirements and costs.

  8. Panorama 2009 - refining

    International Nuclear Information System (INIS)

    2008-01-01

    For oil companies to invest in new refining and conversion capacity, favorable conditions over time are required. In other words, refining margins must remain high and demand sustained over a long period. That was the situation prevailing before the onset of the financial crisis in the second half of 2008. The economic conjuncture has taken a substantial turn for the worse since then and the forecasts for 2009 do not look bright. Oil demand is expected to decrease in the OECD countries and to grow much more slowly in the emerging countries. It is anticipated that refining margins will fall in 2009 - in 2008, they slipped significantly in the United States - as a result of increasingly sluggish demand, especially for light products. The next few months will probably be unfavorable to investment. In addition to a gloomy business outlook, there may also be a problem of access to sources of financing. As for investment projects, a mainstream trend has emerged in the last few years: a shift away from the regions that have historically been most active (the OECD countries) towards certain emerging countries, mostly in Asia or the Middle East. The new conjuncture will probably not change this trend

  9. MANY MEN USED ED TREATMENT WITHOUT THEIR PARTNERS’ KNOWLEDGE

    OpenAIRE

    Tan HM; Choo WY; Ng CJ; Low WY

    2007-01-01

    This paper aimed to identify and explore the understanding and perception of erectile dysfunction (ED) using exploratory qualitative approaches. This study was conducted in Klang Valley, Malaysia. Purposive sampling was used to recruit 17 urban men aged 40-75 years. A semi-structural interview guide was used to explore men’s understanding of ED, impacts on their well-being and experiences with treatments. The focus groups revealed that ED was perceived to be an important loss in men’s lives ...

  10. Measurement of Double-Polarization Asymmetries in the Quasielastic He3→(e → ,e'd ) Process

    Science.gov (United States)

    Mihovilovič, M.; Jin, G.; Long, E.; Zhang, Y.-W.; Allada, K.; Anderson, B.; Annand, J. R. M.; Averett, T.; Boeglin, W.; Bradshaw, P.; Camsonne, A.; Canan, M.; Cates, G. D.; Chen, C.; Chen, J. P.; Chudakov, E.; De Leo, R.; Deng, X.; Deltuva, A.; Deur, A.; Dutta, C.; El Fassi, L.; Flay, D.; Frullani, S.; Garibaldi, F.; Gao, H.; Gilad, S.; Gilman, R.; Glamazdin, O.; Golak, J.; Golge, S.; Gomez, J.; Hansen, O.; Higinbotham, D. W.; Holmstrom, T.; Huang, J.; Ibrahim, H.; de Jager, C. W.; Jensen, E.; Jiang, X.; Jones, M.; Kang, H.; Katich, J.; Khanal, H. P.; Kievsky, A.; King, P.; Korsch, W.; LeRose, J.; Lindgren, R.; Lu, H.-J.; Luo, W.; Marcucci, L. E.; Markowitz, P.; Meziane, M.; Michaels, R.; Moffit, B.; Monaghan, P.; Muangma, N.; Nanda, S.; Norum, B. E.; Pan, K.; Parno, D.; Piasetzky, E.; Posik, M.; Punjabi, V.; Puckett, A. J. R.; Qian, X.; Qiang, Y.; Qui, X.; Riordan, S.; Saha, A.; Sauer, P. U.; Sawatzky, B.; Schiavilla, R.; Schoenrock, B.; Shabestari, M.; Shahinyan, A.; Širca, S.; Skibiński, R.; John, J. St.; Subedi, R.; Sulkosky, V.; Tobias, W. A.; Tireman, W.; Urciuoli, G. M.; Viviani, M.; Wang, D.; Wang, K.; Wang, Y.; Watson, J.; Wojtsekhowski, B.; Witała, H.; Ye, Z.; Zhan, X.; Zhang, Y.; Zheng, X.; Zhao, B.; Zhu, L.; Jefferson Lab Hall A Collaboration

    2014-12-01

    We present a precise measurement of double-polarization asymmetries in the He3→(e → ,e'd ) reaction. This particular process is a uniquely sensitive probe of hadron dynamics in 3He and the structure of the underlying electromagnetic currents. The measurements have been performed in and around quasielastic kinematics at Q2=0.25 (GeV /c )2 for missing momenta up to 270 MeV /c . The asymmetries are in fair agreement with the state-of-the-art calculations in terms of their functional dependencies on pm and ω , but are systematically offset. Beyond the region of the quasielastic peak, the discrepancies become even more pronounced. Thus, our measurements have been able to reveal deficiencies in the most sophisticated calculations of the three-body nuclear system, and indicate that further refinement in the treatment of their two-and/or three-body dynamics is required.

  11. Romanian refining industry assesses restructuring

    International Nuclear Information System (INIS)

    Tanasescu, D.G.

    1991-01-01

    The Romanian crude oil refining industry, as all the other economic sectors, faces the problems accompanying the transition from a centrally planned economy to a market economy. At present, all refineries have registered as joint-stock companies and all are coordinated and assisted by Rafirom S.A., from both a legal and a production point of view. Rafirom S.A. is a joint-stock company that holds shares in refineries and other stock companies with activities related to oil refining. Such activities include technological research, development, design, transportation, storage, and domestic and foreign marketing. This article outlines the market forces that are expected to: drive rationalization and restructuring of refining operations and define the targets toward which the reconfigured refineries should strive

  12. MANY MEN USED ED TREATMENT WITHOUT THEIR PARTNERS’ KNOWLEDGE

    Directory of Open Access Journals (Sweden)

    Tan HM

    2007-01-01

    Full Text Available This paper aimed to identify and explore the understanding and perception of erectile dysfunction (ED using exploratory qualitative approaches. This study was conducted in Klang Valley, Malaysia. Purposive sampling was used to recruit 17 urban men aged 40-75 years. A semi-structural interview guide was used to explore men’s understanding of ED, impacts on their well-being and experiences with treatments. The focus groups revealed that ED was perceived to be an important loss in men’s lives as sexual performance was closely related to manhood. The men associated ED with a loss of masculinity and self-esteem. Men’s understanding of ED treatments was restricted to phophodiesterase type 5 inhibitors (PDE-5 inhibitors and traditional therapies. Although PDE-5 inhibitors were perceived to be effective, they were concerned about their safety and costs. Some of the men have learned to cope with ED rather than to seek help, particularly among older men, who attributed their decreased sexual capacities and erection difficulties to aging, and therefore conditioned themselves to accepting it. In contrast, younger men who have erectile difficulties are considered as ‘abnormal’, and are more likely to seek help and receive treatment for their sexual problem. Men’s knowledge of and experience with modern treatments of ED were mainly associated with PDE-5 inhibitors. Their perception towards PDE-5 inhibitors was largely influenced by personal experience, information from mass media and friends. The high cost and fear of side effects were two main deterrents in the use of PDE-5 inhibitors. Many men had conceded their use of PDE-5 inhibitors without their partners’ knowledge. They worried that their partners would view the matter with suspicion and mistrust.

  13. Action Refinement

    NARCIS (Netherlands)

    Gorrieri, R.; Rensink, Arend; Bergstra, J.A.; Ponse, A.; Smolka, S.A.

    2001-01-01

    In this chapter, we give a comprehensive overview of the research results in the field of action refinement during the past 12 years. The different approaches that have been followed are outlined in detail and contrasted to each other in a uniform framework. We use two running examples to discuss

  14. ExpandED Options: Learning beyond High School Walls

    Science.gov (United States)

    ExpandED Schools, 2014

    2014-01-01

    Through ExpandED Options by TASC, New York City high school students get academic credit for learning career-related skills that lead to paid summer jobs. Too many high school students--including those most likely to drop out--are bored or see classroom learning as irrelevant. ExpandED Options students live the connection between mastering new…

  15. Optimization of Refining Craft for Vegetable Insulating Oil

    Science.gov (United States)

    Zhou, Zhu-Jun; Hu, Ting; Cheng, Lin; Tian, Kai; Wang, Xuan; Yang, Jun; Kong, Hai-Yang; Fang, Fu-Xin; Qian, Hang; Fu, Guang-Pan

    2016-05-01

    Vegetable insulating oil because of its environmental friendliness are considered as ideal material instead of mineral oil used for the insulation and the cooling of the transformer. The main steps of traditional refining process included alkali refining, bleaching and distillation. This kind of refining process used in small doses of insulating oil refining can get satisfactory effect, but can't be applied to the large capacity reaction kettle. This paper using rapeseed oil as crude oil, and the refining process has been optimized for large capacity reaction kettle. The optimized refining process increases the acid degumming process. The alkali compound adds the sodium silicate composition in the alkali refining process, and the ratio of each component is optimized. Add the amount of activated clay and activated carbon according to 10:1 proportion in the de-colorization process, which can effectively reduce the oil acid value and dielectric loss. Using vacuum pumping gas instead of distillation process can further reduce the acid value. Compared some part of the performance parameters of refined oil products with mineral insulating oil, the dielectric loss of vegetable insulating oil is still high and some measures are needed to take to further optimize in the future.

  16. Grain refining efficiency of Al-Ti-C alloys

    International Nuclear Information System (INIS)

    Birol, Yuecel

    2006-01-01

    The problems associated with boride agglomeration and the poisoning effect of Zr in Zr-bearing alloys have created a big demand for boron-free grain refiners. The potential benefits of TiC as a direct nucleant for aluminium grains have thus generated a great deal of interest in TiC-bearing alloys in recent years. In Al-Ti-C grain refiners commercially available today, Al 3 Ti particles are introduced into the melt along with the TiC particles. Since the latter are claimed to nucleate α-Al directly, it is of great technological interest to see if reducing the Ti:C ratio further, i.e., increasing the C content of the grain refiner, will produce an increase in the grain refining efficiency of these alloys. A series of grain refiner samples with the Ti concentration fixed at 3% and a range of C contents between 0 and 0.75 were obtained by appropriately mixing an experimental Al-3Ti-0.75C alloy with Al-10Ti alloy and commercial purity aluminium. The grain refining efficiency of these grain refiners was assessed to investigate the role of the insoluble TiC and the soluble Al 3 Ti particles. The optimum chemistry for the Al-Ti-C grain refiners was also identified

  17. Grain refining efficiency of Al-Ti-C alloys

    Energy Technology Data Exchange (ETDEWEB)

    Birol, Yuecel [Materials Institute, Marmara Research Center, TUBITAK, 41470 Gebze, Kocaeli (Turkey)]. E-mail: yucel.birol@mam.gov.tr

    2006-09-28

    The problems associated with boride agglomeration and the poisoning effect of Zr in Zr-bearing alloys have created a big demand for boron-free grain refiners. The potential benefits of TiC as a direct nucleant for aluminium grains have thus generated a great deal of interest in TiC-bearing alloys in recent years. In Al-Ti-C grain refiners commercially available today, Al{sub 3}Ti particles are introduced into the melt along with the TiC particles. Since the latter are claimed to nucleate {alpha}-Al directly, it is of great technological interest to see if reducing the Ti:C ratio further, i.e., increasing the C content of the grain refiner, will produce an increase in the grain refining efficiency of these alloys. A series of grain refiner samples with the Ti concentration fixed at 3% and a range of C contents between 0 and 0.75 were obtained by appropriately mixing an experimental Al-3Ti-0.75C alloy with Al-10Ti alloy and commercial purity aluminium. The grain refining efficiency of these grain refiners was assessed to investigate the role of the insoluble TiC and the soluble Al{sub 3}Ti particles. The optimum chemistry for the Al-Ti-C grain refiners was also identified.

  18. TrED: the Trichophyton rubrum Expression Database

    Directory of Open Access Journals (Sweden)

    Liu Tao

    2007-07-01

    Full Text Available Abstract Background Trichophyton rubrum is the most common dermatophyte species and the most frequent cause of fungal skin infections in humans worldwide. It's a major concern because feet and nail infections caused by this organism is extremely difficult to cure. A large set of expression data including expressed sequence tags (ESTs and transcriptional profiles of this important fungal pathogen are now available. Careful analysis of these data can give valuable information about potential virulence factors, antigens and novel metabolic pathways. We intend to create an integrated database TrED to facilitate the study of dermatophytes, and enhance the development of effective diagnostic and treatment strategies. Description All publicly available ESTs and expression profiles of T. rubrum during conidial germination in time-course experiments and challenged with antifungal agents are deposited in the database. In addition, comparative genomics hybridization results of 22 dermatophytic fungi strains from three genera, Trichophyton, Microsporum and Epidermophyton, are also included. ESTs are clustered and assembled to elongate the sequence length and abate redundancy. TrED provides functional analysis based on GenBank, Pfam, and KOG databases, along with KEGG pathway and GO vocabulary. It is integrated with a suite of custom web-based tools that facilitate querying and retrieving various EST properties, visualization and comparison of transcriptional profiles, and sequence-similarity searching by BLAST. Conclusion TrED is built upon a relational database, with a web interface offering analytic functions, to provide integrated access to various expression data of T. rubrum and comparative results of dermatophytes. It is devoted to be a comprehensive resource and platform to assist functional genomic studies in dermatophytes. TrED is available from URL: http://www.mgc.ac.cn/TrED/.

  19. A comparison of the analysis of REE-bearing phosphates by standardless EDS and standardised EDS and WDS

    International Nuclear Information System (INIS)

    Griffin, B.J.; Hancock, R.C.; Trautman, R.L.

    2002-01-01

    Full text: Current generation energy dispersive X-ray analysis systems EDS on SEM are user-friendly with 'simple' software interfaces. Minimal training is considered necessary for operation. One aim of this study was to test this hypothesis. The second aim, as a part of other studies, was to compare the results of the x-ray microanalysis of a suite of rare earth element (REE) bearing standard glasses and also a suite of rare earth element (REE) bearing phosphate mineral grains using different analytical systems. Our results from the same sample mounts have been obtained using three analytical systems: an Oxford Instruments ISIS EDS on a JEOL 6400 SEM, a Noran Voyager EDS on a JEOL 6400 SEM and a Moran Scientific WDS package on a JEOL 6400 SEM. A total of forty nine natural mineral grains have been analysed for twenty-two elements, including the REE, Ca, P and F (where possible) by each analytical system. Additional analyses were obtained from simple REE-bearing glass standards, each containing only one REE at around 11 wt %. The natural mineral grain results obtained from the different analytical systems show a number of significant variations. The two EDS datasets are comparable in terms of total REE but generally are a factor of two less than the WDS dataset. Internally the EDS datasets differ in that one set shows consistently a strong negative yttrium oxide result (typically -1 wt %) due to an excessive correction for a strong phosphorus overlap (Ka on La) whereas the second dataset shows the reverse with typically 1 wt % yttrium oxide reported, as a result of inadequate correction of the phosphorus overlap. Major elements are comparable between the standard-based datasets but not with the standardless dataset although all show similar reproducibility. The standard glass results are more coherent and consistent, as would be expected from the simpler composition and higher abundances. One clear outcome from these data is that complex compositions where

  20. CME1003Pg023ED

    African Journals Online (AJOL)

    Chantel

    resistance alone or severe defects in ... skeletal muscle and liver, decreased ... weight loss through calorie-restrict- ed diets .... carbohydrate and lipid metabolism.12 ... and a variable effect on low-density ... months of therapy.18 Comparison.

  1. SJP0704Pg001ED

    African Journals Online (AJOL)

    Enrique

    and an updated overview of newer research in this field. It also gives practical ... schizophrenia, manic episodes, major depressive disorder sec- ondary to schizophrenia ..... of Cerebral Disorder. 3rd ed. London: Blackwell Science, 1998. 16.

  2. Data refinement for true concurrency

    Directory of Open Access Journals (Sweden)

    Brijesh Dongol

    2013-05-01

    Full Text Available The majority of modern systems exhibit sophisticated concurrent behaviour, where several system components modify and observe the system state with fine-grained atomicity. Many systems (e.g., multi-core processors, real-time controllers also exhibit truly concurrent behaviour, where multiple events can occur simultaneously. This paper presents data refinement defined in terms of an interval-based framework, which includes high-level operators that capture non-deterministic expression evaluation. By modifying the type of an interval, our theory may be specialised to cover data refinement of both discrete and continuous systems. We present an interval-based encoding of forward simulation, then prove that our forward simulation rule is sound with respect to our data refinement definition. A number of rules for decomposing forward simulation proofs over both sequential and parallel composition are developed.

  3. Refining the microstructure of an AISI M2 tool steel by high-energy milling

    International Nuclear Information System (INIS)

    Postiglioni, R.V.; Alamino, A.E; Vurobi Junior, S.

    2009-01-01

    Samples of AISI M2 steel were produced by high-energy milling from chips of machining in Spex high energy mill, compaction and sintering of the powder obtained. The powder was analyzed by X-ray diffraction, and then compressed in discs of 8mm in diameter. The specimens have sintering at 1200 deg C for 1 hour under vacuum atmosphere, followed by annealing, quenching and tempering for 1 hour at 315 deg C and 540°C. Along with each disc, a sample of as-received steel was subjected to the same heat treatments to compare the final microstructure. After standard metallographic preparation, samples were etched with Beraha's reagent, characterized by optical microscopy, quantitative metallography, scanning electron microscopy with micro analysis and mapping by EDS, besides Vickers hardness. The steel produced by high-energy milling presented more refined carbide and better distribution in the microstructure. There was also reduction in the size of prior austenitic grains. (author)

  4. Grain Refinement of Permanent Mold Cast Copper Base Alloys

    Energy Technology Data Exchange (ETDEWEB)

    M.Sadayappan; J.P.Thomson; M.Elboujdaini; G.Ping Gu; M. Sahoo

    2005-04-01

    Grain refinement is a well established process for many cast and wrought alloys. The mechanical properties of various alloys could be enhanced by reducing the grain size. Refinement is also known to improve casting characteristics such as fluidity and hot tearing. Grain refinement of copper-base alloys is not widely used, especially in sand casting process. However, in permanent mold casting of copper alloys it is now common to use grain refinement to counteract the problem of severe hot tearing which also improves the pressure tightness of plumbing components. The mechanism of grain refinement in copper-base alloys is not well understood. The issues to be studied include the effect of minor alloy additions on the microstructure, their interaction with the grain refiner, effect of cooling rate, and loss of grain refinement (fading). In this investigation, efforts were made to explore and understand grain refinement of copper alloys, especially in permanent mold casting conditions.

  5. Comparing Syntactic and Semantics Action Refinement

    NARCIS (Netherlands)

    Goltz, Ursula; Gorrieri, Roberto; Rensink, Arend

    The semantic definition of action refinement on labelled configuration structures is compared with the notion of syntactic substitution, which can be used as another notion of action refinement in a process algebraic setting. The comparison is done by studying a process algebra equipped with

  6. Ethane dimethanesulfonate (EDS) perturbs epididymal epithelial cell function in vitro

    International Nuclear Information System (INIS)

    Klinefelter, G.

    1990-01-01

    The formation of sperm granulomas in the epididymis following exposure to EDS, a Leydig cell toxicant, was reported by Cooper and Jackson in 1970. Recent work suggests that EDS may effect the epididymis directly. An in vitro system was developed to determine the nature of any direct effect. The caput epididymis from adult rats was dissected free of connective tissue and small pieces of the tissue were enzymatically digested until plaques of epididymal epithelial cells were obtained. Plaques were cultured on an extracellular matrix gelled on top of a semipermeable filter creating dual-compartment environments. The epithelial cells maintained typical morphology and protein secretion in this culture system for several days. Beginning on day 3, EDS (1 mM) was added to the basal compartment, with or without 35 S-methionine. After 24 hours, 35 S-labelled culture medium was taken from the apical compartment and analyzed by SDS-PAGE and fluorography. EDS caused decreased secretion of several proteins, including a 39 Kd molecule. Interestingly, a 39 Kd protein was also shown to disappear from sperm taken from the caput epididymidis following in vivo exposure to EDS. Unlabelled cultures were fixed and processed for light microscopy. No alterations in morphological integrity were observed. Thus, epididymal epithelial cell function is directly altered by EDS exposure

  7. Met Ed gets reprieve: banks lend tax money

    International Nuclear Information System (INIS)

    Utroska, D.

    1981-01-01

    A consortium of banks agreed to loan Metropolitan Edison $23 million to pay its April 15 state taxes and temporarily relieve a cash-flow problem that is leading to default after the Pennsylvania Public Utility Commission expedited a rate request. The continued solvency of Met Ed is a matter of speculation because the present credit formula is based on liquid assets which the PUC did not address. While the action taken by the bankers gives Met Ed a reprieve, it does not provide a long-term solution. The Revolving Credit Agreement will expire on October 1. Met Ed is still faced with the problem of relicensing Three Mile Island-1 unit and the cost of underwriting the cleanup of the No. 2 unit

  8. Steel refining possibilities in LF

    Science.gov (United States)

    Dumitru, M. G.; Ioana, A.; Constantin, N.; Ciobanu, F.; Pollifroni, M.

    2018-01-01

    This article presents the main possibilities for steel refining in Ladle Furnace (LF). These, are presented: steelmaking stages, steel refining through argon bottom stirring, online control of the bottom stirring, bottom stirring diagram during LF treatment of a heat, porous plug influence over the argon stirring, bottom stirring porous plug, analysis of porous plugs disposal on ladle bottom surface, bottom stirring simulation with ANSYS, bottom stirring simulation with Autodesk CFD.

  9. ED50 and ED95 of Intrathecal Bupivacaine Coadministered with Sufentanil for Cesarean Delivery Under Combined Spinal-epidural in Severely Preeclamptic Patients

    Institute of Scientific and Technical Information of China (English)

    Fei Xiao; Wen-Ping Xu; Xiao-Min Zhang; Yin-Fa Zhang; Li-Zhong Wang; Xin-Zhong Chen

    2015-01-01

    Background:Spinal anesthesia was considered as a reasonable anesthetic option in severe preeclampsia when cesarean delivery is indicated,and there is no indwelling epidural catheter or contraindication to spinal anesthesia.However,the ideal dose of intrathecal bupivacaine has not been quantified for cesarean delivery for severe preeclamptic patients.This study aimed to determine the ED50 and ED95 of intrathecal bupivacaine for severely preeclamptic patients undergoing elective cesarean delivery.Methods:Two hundred severely preeclamptic patients are undergoing elective cesarean delivery under combined spinal-epidural anesthesia enrolled in this randomized,double-blinded,dose-ranging study.Patients received 4 mg,6 mg,8 mg,or 10 mg intrathecal hyperbaric bupivacaine with 2.5 μg sufentanil.Successful spinal anesthesia was defined as a T6 sensory level achieved within 10 minutes after intrathecal drug administration and/or no epidural supplement was required during the cesarean section.The ED50 and ED95 were calculated with a logistic regression model.Results:ED50 and ED95 ofintrathecal bupivacaine for successful spinal anesthesia were 5.67 mg (95％ confidence interval [CI]:5.20-6.10 mg) and 8.82 mg (95％ CI:8.14-9.87 mg) respectively.The incidence of hypotension in Group 8 mg and Group 10 mg was higher than that in Group 4 mg and Group 6 mg (P ＜ 0.05).The sensory block was significantly different among groups 10 minutes after intrathecal injection (P ＜ 0.05).The use of lidocaine in Group 4 mg was higher than that in other groups (P ＜ 0.05).The use of phenylephrine in Group 8 mg and Group 10 mg was higher than that in the other two groups (P ＜ 0.05).The lowest systolic blood pressure before the infant delivery of Group 8 mg and Group 10 mg was lower than the other two groups (P ＜ 0.05).The satisfaction of muscle relaxation in Group 4 mg was lower than other groups (P ＜ 0.05).There was no significant difference in patients' satisfaction and the newborns

  10. On Syntactic and Semantic Action Refinement

    NARCIS (Netherlands)

    Hagiya, M.; Goltz, U.; Mitchell, J.C.; Gorrieri, R.; Rensink, Arend

    1994-01-01

    The semantic definition of action refinement on labelled event structures is compared with the notion of syntactic substitution, which can be used as another notion of action refinement in a process algebraic setting. This is done by studying a process algebra equipped with the ACP sequential

  11. Refinement for Transition Systems with Responses

    Directory of Open Access Journals (Sweden)

    Marco Carbone

    2012-07-01

    Full Text Available Motivated by the response pattern for property specifications and applications within flexible workflow management systems, we report upon an initial study of modal and mixed transition systems in which the must transitions are interpreted as must eventually, and in which implementations can contain may behaviors that are resolved at run-time. We propose Transition Systems with Responses (TSRs as a suitable model for this study. We prove that TSRs correspond to a restricted class of mixed transition systems, which we refer to as the action-deterministic mixed transition systems. We show that TSRs allow for a natural definition of deadlocked and accepting states. We then transfer the standard definition of refinement for mixed transition systems to TSRs and prove that refinement does not preserve deadlock freedom. This leads to the proposal of safe refinements, which are those that preserve deadlock freedom. We exemplify the use of TSRs and (safe refinements on a small medication workflow.

  12. Design of Grain Refiners for Aluminium Alloys

    Science.gov (United States)

    Tronche, A.; Greer, A. L.

    The efficiency of a grain refiner can be quantified as the number of grains per nucleant particle in the solidified product. Even for effective refiners in aluminium, such as Al-5Ti-1B, it is known from experiments that efficiencies are very low, at best 10-3 to 102. It is of interest to explore the reasons for such low values, and to assess the prospects for increased efficiency though design of refiners. Recently it has been shown [1] that a simple recalescence-based model can make quantitative predictions of grain size as a function of refiner addition level, cooling rate and solute content. In the model, the initiation of grains is limited by the free growth from nucleant particles, the size distribution of which is very important. The present work uses this model as the basis for discussing the effect of particle size distribution on grain refiner performance. Larger particles (of TiB2 in the case of present interest) promote greater efficiency, as do narrower size distributions. It is shown that even if the size distribution could be exactly specified, compromises would have to be made to balance efficiency (defined as above) with other desirable characteristics of a refiner.

  13. A refinement methodology for object-oriented programs

    OpenAIRE

    Tafat , Asma; Boulmé , Sylvain; Marché , Claude

    2010-01-01

    International audience; Refinement is a well-known approach for developing correct-byconstruction software. It has been very successful for producing high quality code e.g., as implemented in the B tool. Yet, such refinement techniques are restricted in the sense that they forbid aliasing (and more generally sharing of data-structures), which often happens in usual programming languages. We propose a sound approach for refinement in presence of aliases. Suitable abstractions of programs are d...

  14. Bauxite Mining and Alumina Refining

    Science.gov (United States)

    Frisch, Neale; Olney, David

    2014-01-01

    Objective: To describe bauxite mining and alumina refining processes and to outline the relevant physical, chemical, biological, ergonomic, and psychosocial health risks. Methods: Review article. Results: The most important risks relate to noise, ergonomics, trauma, and caustic soda splashes of the skin/eyes. Other risks of note relate to fatigue, heat, and solar ultraviolet and for some operations tropical diseases, venomous/dangerous animals, and remote locations. Exposures to bauxite dust, alumina dust, and caustic mist in contemporary best-practice bauxite mining and alumina refining operations have not been demonstrated to be associated with clinically significant decrements in lung function. Exposures to bauxite dust and alumina dust at such operations are also not associated with the incidence of cancer. Conclusions: A range of occupational health risks in bauxite mining and alumina refining require the maintenance of effective control measures. PMID:24806720

  15. South Korea - oil refining overview

    International Nuclear Information System (INIS)

    Hayes, D.

    1999-01-01

    Following the economic problems of the 1990s, the petroleum refining industry of South Korea underwent much involuntary restructuring in 1999 with respect to takeovers and mergers and these are discussed. The demand for petroleum has now pretty well recovered. The reasons for fluctuating prices in the 1990s, how the new structure should be cushioned against changes in the future, and the potential for South Korea to export refined petroleum, are all discussed

  16. Adaptive Mesh Refinement in CTH

    International Nuclear Information System (INIS)

    Crawford, David

    1999-01-01

    This paper reports progress on implementing a new capability of adaptive mesh refinement into the Eulerian multimaterial shock- physics code CTH. The adaptivity is block-based with refinement and unrefinement occurring in an isotropic 2:1 manner. The code is designed to run on serial, multiprocessor and massive parallel platforms. An approximate factor of three in memory and performance improvements over comparable resolution non-adaptive calculations has-been demonstrated for a number of problems

  17. Price implications for Russia's oil refining

    International Nuclear Information System (INIS)

    Khartukov, Eugene M.

    1998-01-01

    Over the past several years, Russia's oil industry has undergone its radical transformation from a wholly state-run and generously subsidized oil distribution system toward a substantially privatized, cash-strapped, and quasi-market ''petropreneurship''. This fully applies to the industry's downstream sector. Still unlike more dynamic E and C operations, the country's refining has turned out better fenced off competitive market forces and is less capable to respond to market imperatives. Consequently, jammed between depressed product prices and persistent feedstock costs, Russian refiners were badly hit by the world oil glut - which has made a radical modernization of the obsolete refining sector clearly a must. (author)

  18. Optimizing refiner operation with statistical modelling

    Energy Technology Data Exchange (ETDEWEB)

    Broderick, G [Noranda Research Centre, Pointe Claire, PQ (Canada)

    1997-02-01

    The impact of refining conditions on the energy efficiency of the process and on the handsheet quality of a chemi-mechanical pulp was studied as part of a series of pilot scale refining trials. Statistical models of refiner performance were constructed from these results and non-linear optimization of process conditions were conducted. Optimization results indicated that increasing the ratio of specific energy applied in the first stage led to a reduction of some 15 per cent in the total energy requirement. The strategy can also be used to obtain significant increases in pulp quality for a given energy input. 20 refs., 6 tabs.

  19. Toward reliable and repeatable automated STEM-EDS metrology with high throughput

    Science.gov (United States)

    Zhong, Zhenxin; Donald, Jason; Dutrow, Gavin; Roller, Justin; Ugurlu, Ozan; Verheijen, Martin; Bidiuk, Oleksii

    2018-03-01

    New materials and designs in complex 3D architectures in logic and memory devices have raised complexity in S/TEM metrology. In this paper, we report about a newly developed, automated, scanning transmission electron microscopy (STEM) based, energy dispersive X-ray spectroscopy (STEM-EDS) metrology method that addresses these challenges. Different methodologies toward repeatable and efficient, automated STEM-EDS metrology with high throughput are presented: we introduce the best known auto-EDS acquisition and quantification methods for robust and reliable metrology and present how electron exposure dose impacts the EDS metrology reproducibility, either due to poor signalto-noise ratio (SNR) at low dose or due to sample modifications at high dose conditions. Finally, we discuss the limitations of the STEM-EDS metrology technique and propose strategies to optimize the process both in terms of throughput and metrology reliability.

  20. Grain refinement mechanism in A3003 alloy

    International Nuclear Information System (INIS)

    Cho, Hoon; Shin, Je-Sik; Lee, Byoung-Soo; Jo, Hyung-Ho

    2009-01-01

    In the present study, in order to find out an grain refinement mechanism, 0.1wt.% Al-10wt.%Ti master alloy was added into A3003 alloy melt contained in graphite crucible and in alumina crucible, and then the melt holding time at 750 deg. C was systematically changed from 1 min up to 120 min. It is interesting to note that the grain refinement and fading phenomena remarkably depend on the crucible material. The fading effect in the specimens using alumina crucible can be explained as the result of TiAl 3 phase dissolution into molten aluminium matrix. In the specimens using graphite crucible, the grain refinement was occurred gradually with increasing holding time. It was suggest that the continuous grain refinement is due to transition of refinement mechanism from TiAl 3 phase to TiC phase. It can be mentioned that the TiC formed from titanium and carbon solute in the aluminium melt, which came from the Al-10Ti alloy and the graphite crucible.

  1. Refining discordant gene trees.

    Science.gov (United States)

    Górecki, Pawel; Eulenstein, Oliver

    2014-01-01

    Evolutionary studies are complicated by discordance between gene trees and the species tree in which they evolved. Dealing with discordant trees often relies on comparison costs between gene and species trees, including the well-established Robinson-Foulds, gene duplication, and deep coalescence costs. While these costs have provided credible results for binary rooted gene trees, corresponding cost definitions for non-binary unrooted gene trees, which are frequently occurring in practice, are challenged by biological realism. We propose a natural extension of the well-established costs for comparing unrooted and non-binary gene trees with rooted binary species trees using a binary refinement model. For the duplication cost we describe an efficient algorithm that is based on a linear time reduction and also computes an optimal rooted binary refinement of the given gene tree. Finally, we show that similar reductions lead to solutions for computing the deep coalescence and the Robinson-Foulds costs. Our binary refinement of Robinson-Foulds, gene duplication, and deep coalescence costs for unrooted and non-binary gene trees together with the linear time reductions provided here for computing these costs significantly extends the range of trees that can be incorporated into approaches dealing with discordance.

  2. Association of ED with chronic periodontal disease.

    Science.gov (United States)

    Matsumoto, S; Matsuda, M; Takekawa, M; Okada, M; Hashizume, K; Wada, N; Hori, J; Tamaki, G; Kita, M; Iwata, T; Kakizaki, H

    2014-01-01

    To examine the relationship between chronic periodontal disease (CPD) and ED, the interview sheet including the CPD self-checklist (CPD score) and the five-item version of the International Index of Erectile Function (IIEF-5) was distributed to 300 adult men who received a comprehensive dental examination. Statistical analyses were performed by the Spearman's rank correlation coefficient and other methods. Statistical significance was accepted at the level of Pdysfunction and the systematic inflammatory changes associated with CPD. The present study also suggests that dental health is important as a preventive medicine for ED.

  3. Basic effects of pulp refining on fiber properties--a review.

    Science.gov (United States)

    Gharehkhani, Samira; Sadeghinezhad, Emad; Kazi, Salim Newaz; Yarmand, Hooman; Badarudin, Ahmad; Safaei, Mohammad Reza; Zubir, Mohd Nashrul Mohd

    2015-01-22

    The requirement for high quality pulps which are widely used in paper industries has increased the demand for pulp refining (beating) process. Pulp refining is a promising approach to improve the pulp quality by changing the fiber characteristics. The diversity of research on the effect of refining on fiber properties which is due to the different pulp sources, pulp consistency and refining equipment has interested us to provide a review on the studies over the last decade. In this article, the influence of pulp refining on structural properties i.e., fibrillations, fine formation, fiber length, fiber curl, crystallinity and distribution of surface chemical compositions is reviewed. The effect of pulp refining on electrokinetic properties of fiber e.g., surface and total charges of pulps is discussed. In addition, an overview of different refining theories, refiners as well as some tests for assessing the pulp refining is presented. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Oil refining expansion criteria for Brazil

    International Nuclear Information System (INIS)

    Tavares, M.E.E.; Szklo, A.S.; Machado, G.V.; Schaeffer, R.; Mariano, J.B.; Sala, J.F.

    2006-01-01

    This paper assesses different strategies for the expansion of Brazil's oil refining segment, using criteria that range from energy security (reducing imports and vulnerability for key products) through to maximizing the profitability of this sector (boosting the output of higher value oil products) and adding value to Brazil's oil production (reducing exports of heavy acid oil). The development prospects are analyzed for conventional fuel production technology routes, sketching out three possible refining schemes for Brazilian oil and a GTL plant for producing gasoil from natural gas. Market scenario simulations indicate that investments will be required in Brazil's oil refining segment over and above those allocated to planned modifications in its current facilities, reducing the nation's vulnerability in terms of gasoil and petrochemical naphtha imports. Although not economically attractive, oil refining is a key activity that is crucial to oil company strategies. The decision to invest in this segment depends on local infrastructure conditions, environmental constraints and fuel specifications, in addition to oil company strategies, steady growth in demand and the definition of a government policy that eases institutional risks. (author)

  5. Oil refining expansion criteria for Brazil

    International Nuclear Information System (INIS)

    Tavares, Marina Elisabete Espinho; Szklo, Alexandre Salem; Machado, Giovani Vitoria; Schaeffer, Roberto; Mariano, Jacqueline Barboza; Sala, Janaina Francisco

    2006-01-01

    This paper assesses different strategies for the expansion of Brazil's oil refining segment, using criteria that range from energy security (reducing imports and vulnerability for key products) through to maximizing the profitability of this sector (boosting the output of higher value oil products) and adding value to Brazil's oil production (reducing exports of heavy acid oil). The development prospects are analyzed for conventional fuel production technology routes, sketching out three possible refining schemes for Brazilian oil and a GTL plant for producing gasoil from natural gas. Market scenario simulations indicate that investments will be required in Brazil's oil refining segment over and above those allocated to planned modifications in its current facilities, reducing the nation's vulnerability in terms of gasoil and petrochemical naphtha imports. Although not economically attractive, oil refining is a key activity that is crucial to oil company strategies. The decision to invest in this segment depends on local infrastructure conditions, environmental constraints and fuel specifications, in addition to oil company strategies, steady growth in demand and the definition of a government policy that eases institutional risks

  6. Accurate macromolecular crystallographic refinement: incorporation of the linear scaling, semiempirical quantum-mechanics program DivCon into the PHENIX refinement package

    Energy Technology Data Exchange (ETDEWEB)

    Borbulevych, Oleg Y.; Plumley, Joshua A.; Martin, Roger I. [QuantumBio Inc., 2790 West College Avenue, State College, PA 16801 (United States); Merz, Kenneth M. Jr [University of Florida, Gainesville, Florida (United States); Westerhoff, Lance M., E-mail: lance@quantumbioinc.com [QuantumBio Inc., 2790 West College Avenue, State College, PA 16801 (United States)

    2014-05-01

    Semiempirical quantum-chemical X-ray macromolecular refinement using the program DivCon integrated with PHENIX is described. Macromolecular crystallographic refinement relies on sometimes dubious stereochemical restraints and rudimentary energy functionals to ensure the correct geometry of the model of the macromolecule and any covalently bound ligand(s). The ligand stereochemical restraint file (CIF) requires a priori understanding of the ligand geometry within the active site, and creation of the CIF is often an error-prone process owing to the great variety of potential ligand chemistry and structure. Stereochemical restraints have been replaced with more robust functionals through the integration of the linear-scaling, semiempirical quantum-mechanics (SE-QM) program DivCon with the PHENIX X-ray refinement engine. The PHENIX/DivCon package has been thoroughly validated on a population of 50 protein–ligand Protein Data Bank (PDB) structures with a range of resolutions and chemistry. The PDB structures used for the validation were originally refined utilizing various refinement packages and were published within the past five years. PHENIX/DivCon does not utilize CIF(s), link restraints and other parameters for refinement and hence it does not make as many a priori assumptions about the model. Across the entire population, the method results in reasonable ligand geometries and low ligand strains, even when the original refinement exhibited difficulties, indicating that PHENIX/DivCon is applicable to both single-structure and high-throughput crystallography.

  7. 8 Different approaches needed to manage ED demand among different age-groups.

    Science.gov (United States)

    Rimmer, Melanie; Ablard, Suzanne; O'Keeffe, Colin; Mason, Suzanne

    2017-12-01

    A variety of interventions have been proposed to manage rising demand for Emergency and Urgent Care, described by an NHS England review as unsustainable in the long term. However it is unlikely that any suggested approach will be equally suitable for the diverse population of ED users.We aimed to understand the patterns of demand amongst different types of patients attending ED. We also sought to understand the intended and unintended effects of demand management initiatives. Our study combined insights from routine data, a survey of ED patients, and qualitative interviews with ED staff. This paper describes the results of our analysis of the interviews. We conducted semi-structured interviews with 25 ED and Urgent Care Centre staff across 7 hospital sites in Yorkshire and Humber between 25 April and 11 July 2016. The interview topic guide asked about 4 broad areas; job role, description of patients and their impact on demand, description of inappropriate attendance, and current/future initiatives to deal with rising demand. Interviews were transcribed verbatim and analysed using framework analysis. We analysed the results to identify groups of patients with different patterns of use of ED services. We also explored ED staff experiences of demand management initiatives, and their suggestions for future initiatives. Although we did not ask specifically about patients' age, our analysis revealed that ED staff categorised attenders as children and young people, working age people, and older people. These groups had different reasons for attendance, different routes to the ED, different rate of non-urgent attendance, and different issues driving demand. Staff also described variation in the time taken to treat patients of different ages, with the oldest and youngest patients described as requiring the most time.There was no consensus amongst staff about the effectiveness of initiatives for managing demand. A strikingly wide variety of initiatives were mentioned

  8. Refined large N duality for knots

    DEFF Research Database (Denmark)

    Kameyama, Masaya; Nawata, Satoshi

    We formulate large N duality of U(N) refined Chern-Simons theory with a torus knot/link in S³. By studying refined BPS states in M-theory, we provide the explicit form of low-energy effective actions of Type IIA string theory with D4-branes on the Ω-background. This form enables us to relate...

  9. Region-of-interest volumetric visual hull refinement

    KAUST Repository

    Knoblauch, Daniel; Kuester, Falko

    2010-01-01

    This paper introduces a region-of-interest visual hull refinement technique, based on flexible voxel grids for volumetric visual hull reconstructions. Region-of-interest refinement is based on a multipass process, beginning with a focussed visual

  10. A 5-year comparison of ED visits by homeless and nonhomeless patients.

    Science.gov (United States)

    Tadros, Allison; Layman, Shelley M; Brewer, Marissa Pantaleone; Davis, Stephen M

    2016-05-01

    A 2005 study examined emergency department (ED) utilization by homeless patients in the United States. Within the following 5 years, unemployment increased by 5%. The objective was to analyze changes in ED utilization between 2005 and 2010 by homeless patients and compare with nonhomeless visits. Data from the 2010 National Hospital Ambulatory Medical Care Survey were evaluated. Approximately 679854 visits were made by homeless patients, the majority of which were made by men (72.3%) and patients between the ages of 45 and 64 (50.5%). Homeless patients were twice as likely to be uninsured. ED visits by homeless patients had increased by 44% during the 5-year period. Arrival to the ED by ambulance increased by 14% between the study years, and homeless patients were less likely to be admitted. The number of visits by homeless patients in the ED increased proportionally to an overall increase in ED visits between 2005 and 2010. Copyright © 2016 Elsevier Inc. All rights reserved.

  11. US refining reviewed

    International Nuclear Information System (INIS)

    Yamaguchi, N.D.

    1998-01-01

    The paper reviews the history, present position and future prospects of the petroleum industry in the USA. The main focus is on supply and demand, the high quality of the products, refinery capacity and product trade balances. Diagrams show historical trends in output, product demand, demand for transport fuels and oil, refinery capacity, refinery closures, and imports and exports. Some particularly salient points brought out were (i) production of US crude shows a marked downward trend but imports of crude will continue to increase, (ii) product demand will continue to grow even though the levels are already high, (iii) the demand is dominated by those products that typically yield the highest income for the refiner, (i.e. high quality transport fuels for environmental compliance), (iv) refinery capacity has decreased since 1980 and (v) refining will continue to have financial problems but will still be profitable. (UK)

  12. Neutrosophic Refined Similarity Measure Based on Cosine Function

    Directory of Open Access Journals (Sweden)

    Said Broumi

    2014-12-01

    Full Text Available In this paper, the cosine similarity measure of neutrosophic refined (multi- sets is proposed and its properties are studied. The concept of this cosine similarity measure of neutrosophic refined sets is the extension of improved cosine similarity measure of single valued neutrosophic. Finally, using this cosine similarity measure of neutrosophic refined set, the application of medical diagnosis is presented.

  13. Future of French refining

    International Nuclear Information System (INIS)

    Calvet, B.

    1993-01-01

    Over recent years, the refining industry has had to grapple with a growing burden of environmental and safety regulations concerning not only its plants and other facilities, but also its end products. At the same time, it has had to bear the effects of the reduction of the special status that used to apply to petroleum, and the consequences of economic freedom, to which we should add, as specifically concerns the French market, the impact of energy policy and the pro-nuclear option. The result is a drop in heavy fuel oil from 36 million tonnes per year in 1973 to 6.3 million in 1992, and in home-heating fuel from 37 to 18 million per year. This fast-moving market is highly competitive. The French market in particular is wide open to imports, but the refining companies are still heavy exporters for those products with high added-value, like lubricants, jet fuel, and lead-free gasolines. The competition has led the refining companies to commit themselves to quality, and to publicize their efforts in this direction. This is why the long-term perspectives for petroleum fuels are still wide open. This is supported by the probable expectation that the goal of economic efficiency is likely to soften the effects of the energy policy, which penalizes petroleum products, in that they have now become competitive again. In the European context, with the challenge of environmental protection and the decline in heavy fuel outlets, French refining has to keep on improving the quality of its products and plants, which means major investments. The industry absolutely must return to a more normal level of profitability, in order to sustain this financial effort, and generate the prosperity of its high-performance plants and equipment. 1 fig., 5 tabs

  14. The evolution of oil refining in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Reid, A. [CONCAWE, Brussels (Belgium)

    2013-04-01

    Back in 1963 when CONCAWE was founded, the world looked very different from what it is today, and so did the global and European refining industry. Oil product markets were expanding fast and new refineries were being built at a steady rate. The oil crisis of the 1970s brought an abrupt end to this, heralding a long era of consolidation and stepwise adaptation. At the same time the nature of the global oil business shifted from fully integrated companies producing, transporting and refining their own oil to a much more diversified situation where oil production ('upstream') and refining/distribution ('downstream') gradually became two essentially separate businesses. From being purely a 'cost centre' in an integrated chain, refining has become a separate activity in its own right, operating as a 'profit centre' between two global markets - crude oil and products - which, although not entirely independent, have their own dynamics and influences. In addition demand gradually shifted towards lighter products while the quality requirements on all products were considerably tightened. This article explores the new challenges that these changes have imposed on EU refiners, and describes CONCAWE's contributions to understanding their impact on refinery production and investments.

  15. Refining of raw materials, lignite present economic problems

    Energy Technology Data Exchange (ETDEWEB)

    Schirmer, G.

    1985-06-01

    East Germany seeks an economic intensification program that involves refining raw materials to a higher level. Lignite briquetting prior to liquefaction and gasification illustrates both the theoretical and practical aspects of that goal and also introduces questions of secure supplies. The author describes the special labor processes, use of technology, recycling of waste materials, and other new problems that the approach entails as the refined raw materials become new materials or energy sources. Economics based on the value of the refined product and the cost of the materials determine the degree of refinement. The concept also involves the relationship of producer and user as profits increase.

  16. Refining's-clean new jingle

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that at a time when profit margins are slim and gasoline demand is down, the U.S. petroleum-refining industry is facing one of its greatest challenges; How to meet new federal and state laws for reformulated gasoline, oxygenated fuels, low-sulfur diesel and other measures to improve the environment. The American Petroleum Institute (API) estimates that industry will spend between $15 and $23 billion by the end of the decade to meet the U.S. Clean Air Act Amendments (CAAA) of 1990, and other legislation. ENSR Consulting and Engineering's capital-spending figure runs to between $70 and 100 billion this decade, including $24 billion to produce reformulated fuels and $10-12 billion to reduce refinery emissions. M.W. Kellogg Co. estimates that refiners may have to spend up to $30 billion this decade to meet the demand for reformulated gasoline. The estimates are wide-ranging because refiners are still studying their options and delaying final decisions as long as they can, to try to ensure they are the best and least-costly decisions. Oxygenated fuels will be required next winter, but federal regulations for reformulated gasoline won't go into effect until 1995, while California's tougher reformulated-fuels law will kick in the following year

  17. Refinement of the concept of uncertainty.

    Science.gov (United States)

    Penrod, J

    2001-04-01

    To analyse the conceptual maturity of uncertainty; to develop an expanded theoretical definition of uncertainty; to advance the concept using methods of concept refinement; and to analyse congruency with the conceptualization of uncertainty presented in the theory of hope, enduring, and suffering. Uncertainty is of concern in nursing as people experience complex life events surrounding health. In an earlier nursing study that linked the concepts of hope, enduring, and suffering into a single theoretical scheme, a state best described as 'uncertainty' arose. This study was undertaken to explore how this conceptualization fit with the scientific literature on uncertainty and to refine the concept. Initially, a concept analysis using advanced methods described by Morse, Hupcey, Mitcham and colleagues was completed. The concept was determined to be partially mature. A theoretical definition was derived and techniques of concept refinement using the literature as data were applied. The refined concept was found to be congruent with the concept of uncertainty that had emerged in the model of hope, enduring and suffering. Further investigation is needed to explore the extent of probabilistic reasoning and the effects of confidence and control on feelings of uncertainty and certainty.

  18. Refinement Checking on Parametric Modal Transition Systems

    DEFF Research Database (Denmark)

    Benes, Nikola; Kretínsky, Jan; Larsen, Kim Guldstrand

    2015-01-01

    Modal transition systems (MTS) is a well-studied specification formalism of reactive systems supporting a step-wise refinement methodology. Despite its many advantages, the formalism as well as its currently known extensions are incapable of expressing some practically needed aspects in the refin...

  19. Japan's refiner/marketers headed for major shakeout

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    Japan's downstream oil industry is in a state of crisis and headed for a major shakeout. The major catalyst for this was a dramatic deregulation step during April 1996 that allowed refined petroleum product imports by non-refiners. The move, together with a sharp drop in refining margins, falling retail gasoline prices, and a service station sector on the brink of collapse, are all leading to massive changes in the way the country's refiners and marketers do business. This paper reviews the collapse of corporate profits during this period of deregulation; the development of a new price system geared toward bringing the prices of gasoline, fuel oil, and kerosene into line with each other to offset the fall in gasoline prices; and industry restructuring including mergers, acquisitions, and marketing consolidation. The paper then makes predictions on the outcome of these changes on the Japanese oil industry

  20. Extensive FE-SEM/EDS, HR-TEM/EDS and ToF-SIMS studies of micron- to nano-particles in anthracite fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Joana [Centro de Geologia, Universidade do Porto, Rua do Campo Alegre, 687, 4169-007 Porto (Portugal); DaBoit, Kátia [Institute of Environmental Research and Human Development, IPADHC, Capivari de Baixo, Santa Catarina (Brazil); Flores, Deolinda [Centro de Geologia, Universidade do Porto, Rua do Campo Alegre, 687, 4169-007 Porto (Portugal); Departamento de Geociências, Ambiente e Ordenamento do Território, Faculdade de Ciências, Universidade do Porto, Rua do Campo Alegre, 687, 4169-007 Porto (Portugal); Kronbauer, Marcio A. [Laboratory of Environmental Researches and Nanotechnology Development, Centro Universitário La Salle, Victor Barreto, 2288 Centro 92010-000, Canoas, RS (Brazil); Silva, Luis F.O., E-mail: felipeqma@hotmail.com [Laboratory of Environmental Researches and Nanotechnology Development, Centro Universitário La Salle, Victor Barreto, 2288 Centro 92010-000, Canoas, RS (Brazil); Environmental Science and Nanotechnology Department, Catarinense Institute of Environmental Research and Human Development, IPADHC, Capivari de Baixo, Santa Catarina (Brazil)

    2013-05-01

    The generation of anthropogenic carbonaceous matter and mixed crystalline/amorphous mineral ultrafine/nano-particles in the 1 to 100 nm size range by worldwide coal power plants represents serious environmental problems due to their potential hazards. Coal fly ash (CFA) that resulted from anthracite combustion in a Portuguese thermal power plant was studied in this work. The physico-chemical characterization of ultrafine/nano-particles present in the CFA samples and their interaction with environment are the aim of this study. The methodologies applied for this work were field emission scanning electron microscopy (FE-SEM) with energy dispersive X-ray spectroscopy (EDS), high-resolution transmission electron microscopy with energy dispersive X-ray spectroscopy (HR-TEM/EDS) and time of flight secondary ion mass spectrometry (ToF-SIMS). Some hazardous volatile elements, C, N, S and Hg contents were also determined in the studied samples. Generally, the CFA samples comprise carbonaceous, glassy and metallic solid spheres with some containing mixed amorphous/crystalline phases. The EDS analysis coupled with the FE-SEM and HR-TEM observations of the fly ash particles with 100 to 0.1 nm demonstrates that these materials contain a small but significant proportion of encapsulated HVEs. In addition, the presence of abundant multi-walled carbon nanotubes (MWCNTs) and amorphous carbon particles, both containing hazardous volatile elements (HVEs), was also evidenced by the FE-SEM/EDS and HR-TEM/EDS analysis. A wide range of organic and inorganic compounds was determined by chemical maps obtained in ToF-SIMS analysis. - Highlights: ► We examine changes in the level of ultrafine and nanoparticles of coal mining. ► Increasing geochemical information will increase human health information in this area. ► Electron bean and Tof-SIMS increase area information.

  1. Pilot scale refinning of crude soybean oil | Mensah | Journal of ...

    African Journals Online (AJOL)

    Pilot scale refinning of crude soybean oil. ... Abstract. A laboratory process for refining soybean has been scaled up to a 145 tonne per annum pilot plant to refine crude soybean oil. ... The quality of the refined oil was found to be within national and codex standard specifications for edible oil from vegetable sources.

  2. Technological studies on uranium refining at nuclear materials authority, Egypt

    International Nuclear Information System (INIS)

    Mohammed, H.S.

    1997-01-01

    In 1992 nuclear materials authority (NMA) took a decision to establish yellow cake refining. Unit so as to study refining of El-Atshan yellow cake which recently produced by ion-exchange pilot plant, production sector. The research studies followed the conventional refining rout to produce nuclear grade UO 3 . This implies investigations on some common solvents to refine the cake viz. tri alkyl phosphates, tri alkyl phosphine oxides, dialkyl phosphoric acid as well as high-molecular weight long-chain tertiary amines. Moreover, non-conventional refining process has also been presented depending on the selectivity of uranyl ion to be dissolved by carbonate and to be precipitated by hydrogen peroxide. Most of the proposed processes were found feasible to refine El-Atshan yellow cake. however, the non- conventional refining process appears to be the most promising, owing to its superior performance and economy

  3. Cavitation-aided grain refinement in aluminium alloys

    NARCIS (Netherlands)

    Atamanenko, T.V.

    2010-01-01

    This thesis deals with grain refinement under the influence of ultrasonic-driven cavitation in aluminium casting processes. Three major goals of this research were: (1) to identify the mechanism of the cavitation-aided grain refinement at different stages of solidification; (2) to reveal the

  4. Accurate macromolecular crystallographic refinement: incorporation of the linear scaling, semiempirical quantum-mechanics program DivCon into the PHENIX refinement package.

    Science.gov (United States)

    Borbulevych, Oleg Y; Plumley, Joshua A; Martin, Roger I; Merz, Kenneth M; Westerhoff, Lance M

    2014-05-01

    Macromolecular crystallographic refinement relies on sometimes dubious stereochemical restraints and rudimentary energy functionals to ensure the correct geometry of the model of the macromolecule and any covalently bound ligand(s). The ligand stereochemical restraint file (CIF) requires a priori understanding of the ligand geometry within the active site, and creation of the CIF is often an error-prone process owing to the great variety of potential ligand chemistry and structure. Stereochemical restraints have been replaced with more robust functionals through the integration of the linear-scaling, semiempirical quantum-mechanics (SE-QM) program DivCon with the PHENIX X-ray refinement engine. The PHENIX/DivCon package has been thoroughly validated on a population of 50 protein-ligand Protein Data Bank (PDB) structures with a range of resolutions and chemistry. The PDB structures used for the validation were originally refined utilizing various refinement packages and were published within the past five years. PHENIX/DivCon does not utilize CIF(s), link restraints and other parameters for refinement and hence it does not make as many a priori assumptions about the model. Across the entire population, the method results in reasonable ligand geometries and low ligand strains, even when the original refinement exhibited difficulties, indicating that PHENIX/DivCon is applicable to both single-structure and high-throughput crystallography.

  5. Suicide Prevention in an Emergency Department Population: The ED-SAFE Study.

    Science.gov (United States)

    Miller, Ivan W; Camargo, Carlos A; Arias, Sarah A; Sullivan, Ashley F; Allen, Michael H; Goldstein, Amy B; Manton, Anne P; Espinola, Janice A; Jones, Richard; Hasegawa, Kohei; Boudreaux, Edwin D

    2017-06-01

    Suicide is a leading cause of deaths in the United States. Although the emergency department (ED) is an opportune setting for initiating suicide prevention efforts, ED-initiated suicide prevention interventions remain underdeveloped. To determine whether an ED-initiated intervention reduces subsequent suicidal behavior. This multicenter study of 8 EDs in the United States enrolled adults with a recent suicide attempt or ideation and was composed of 3 sequential phases: (1) a treatment as usual (TAU) phase from August 2010 to December 2011, (2) a universal screening (screening) phase from September 2011 to December 2012, and (3) a universal screening plus intervention (intervention) phase from July 2012 to November 2013. Screening consisted of universal suicide risk screening. The intervention phase consisted of universal screening plus an intervention, which included secondary suicide risk screening by the ED physician, discharge resources, and post-ED telephone calls focused on reducing suicide risk. The primary outcome was suicide attempts (nonfatal and fatal) over the 52-week follow-up period. The proportion and total number of attempts were analyzed. A total of 1376 participants were recruited, including 769 females (55.9%) with a median (interquartile range) age of 37 (26-47) years. A total of 288 participants (20.9%) made at least 1 suicide attempt, and there were 548 total suicide attempts among participants. There were no significant differences in risk reduction between the TAU and screening phases (23% vs 22%, respectively). However, compared with the TAU phase, patients in the intervention phase showed a 5% absolute reduction in suicide attempt risk (23% vs 18%), with a relative risk reduction of 20%. Participants in the intervention phase had 30% fewer total suicide attempts than participants in the TAU phase. Negative binomial regression analysis indicated that the participants in the intervention phase had significantly fewer total suicide attempts

  6. Optimization bitumen-based upgrading and refining schemes

    Energy Technology Data Exchange (ETDEWEB)

    Munteanu, M.; Chen, J. [National Centre for Upgrading Technology, Devon, AB (Canada); Natural Resources Canada, Devon, AB (Canada). CanmetENERGY

    2009-07-01

    This poster highlighted the results of a study in which the entire refining scheme for Canadian bitumen as feedstocks was modelled and simulated under different process configurations, operating conditions and product structures. The aim of the study was to optimize the economic benefits, product quality and energy use under a range of operational scenarios. Optimal refining schemes were proposed along with process conditions for existing refinery configurations and objectives. The goal was to provide guidelines and information for upgrading and refining process design and retrofitting. Critical steps were identified with regards to the upgrading process. It was concluded that the information obtained from this study would lead to significant improvement in process performance and operations, and in reducing the capital cost for building new upgraders and refineries. The simulation results provided valuable information for increasing the marketability of bitumen, reducing greenhouse gas emissions and other environmental impacts associated with bitumen upgrading and refining. tabs., figs.

  7. 1991 worldwide refining and gas processing directory

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    This book ia an authority for immediate information on the industry. You can use it to find new business, analyze market trends, and to stay in touch with existing contacts while making new ones. The possibilities for business applications are numerous. Arranged by country, all listings in the directory include address, phone, fax and telex numbers, a description of the company's activities, names of key personnel and their titles, corporate headquarters, branch offices and plant sites. This newly revised edition lists more than 2000 companies and nearly 3000 branch offices and plant locations. This east-to-use reference also includes several of the most vital and informative surveys of the industry, including the U.S. Refining Survey, the Worldwide Construction Survey in Refining, Sulfur, Gas Processing and Related Fuels, the Worldwide Refining and Gas Processing Survey, the Worldwide Catalyst Report, and the U.S. and Canadian Lube and Wax Capacities Report from the National Petroleum Refiner's Association

  8. A Macdonald refined topological vertex

    Science.gov (United States)

    Foda, Omar; Wu, Jian-Feng

    2017-07-01

    We consider the refined topological vertex of Iqbal et al (2009 J. High Energy Phys. JHEP10(2009)069), as a function of two parameters ≤ft\\lgroup x, y \\right\\rgroup , and deform it by introducing the Macdonald parameters ≤ft\\lgroup q, t \\right\\rgroup , as in the work of Vuletić on plane partitions (Vuletić M 2009 Trans. Am. Math. Soc. 361 2789-804), to obtain ‘a Macdonald refined topological vertex’. In the limit q → t , we recover the refined topological vertex of Iqbal et al and in the limit x → y , we obtain a qt-deformation of the original topological vertex of Aganagic et al (2005 Commun. Math. Phys. 25 425-78). Copies of the vertex can be glued to obtain qt-deformed 5D instanton partition functions that have well-defined 4D limits and, for generic values of ≤ft\\lgroup q, t\\right\\rgroup , contain infinite-towers of poles for every pole present in the limit q → t .

  9. Initial mechanical ventilator settings and lung protective ventilation in the ED.

    Science.gov (United States)

    Wilcox, Susan R; Richards, Jeremy B; Fisher, Daniel F; Sankoff, Jeffrey; Seigel, Todd A

    2016-08-01

    Mechanical ventilation with low tidal volumes has been shown to improve outcomes for patients both with and without acute respiratory distress syndrome. This study aims to characterize mechanically ventilated patients in the emergency department (ED), describe the initial ED ventilator settings, and assess for associations between lung protective ventilation strategies in the ED and outcomes. This was a multicenter, prospective, observational study of mechanical ventilation at 3 academic EDs. We defined lung protective ventilation as a tidal volume of less than or equal to 8 mL/kg of predicted body weight and compared outcomes for patients ventilated with lung protective vs non-lung protective ventilation, including inhospital mortality, ventilator days, intensive care unit length of stay, and hospital length of stay. Data from 433 patients were analyzed. Altered mental status without respiratory pathology was the most common reason for intubation, followed by trauma and respiratory failure. Two hundred sixty-one patients (60.3%) received lung protective ventilation, but most patients were ventilated with a low positive end-expiratory pressure, high fraction of inspired oxygen strategy. Patients were ventilated in the ED for a mean of 5 hours and 7 minutes but had few ventilator adjustments. Outcomes were not significantly different between patients receiving lung protective vs non-lung protective ventilation. Nearly 40% of ED patients were ventilated with non-lung protective ventilation as well as with low positive end-expiratory pressure and high fraction of inspired oxygen. Despite a mean ED ventilation time of more than 5 hours, few patients had adjustments made to their ventilators. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. SED-ED, a workflow editor for computational biology experiments written in SED-ML.

    Science.gov (United States)

    Adams, Richard R

    2012-04-15

    The simulation experiment description markup language (SED-ML) is a new community data standard to encode computational biology experiments in a computer-readable XML format. Its widespread adoption will require the development of software support to work with SED-ML files. Here, we describe a software tool, SED-ED, to view, edit, validate and annotate SED-ML documents while shielding end-users from the underlying XML representation. SED-ED supports modellers who wish to create, understand and further develop a simulation description provided in SED-ML format. SED-ED is available as a standalone Java application, as an Eclipse plug-in and as an SBSI (www.sbsi.ed.ac.uk) plug-in, all under an MIT open-source license. Source code is at https://sed-ed-sedmleditor.googlecode.com/svn. The application itself is available from https://sourceforge.net/projects/jlibsedml/files/SED-ED/.

  11. ED pharmacist monitoring of provider antibiotic selection aids appropriate treatment for outpatient UTI.

    Science.gov (United States)

    Lingenfelter, Erin; Drapkin, Zachary; Fritz, Kelly; Youngquist, Scott; Madsen, Troy; Fix, Megan

    2016-08-01

    We sought to determine whether an emergency department (ED) pharmacist could aid in the monitoring and correction of inappropriate empiric antibiotic selection for urinary tract infections in an outpatient ED population. Urine cultures with greater than 100 000 CFU/mL bacteria from the University of Utah Emergency Department over 1 year (October 2011-Sept 2012) were identified using our electronic medical record system. Per ED protocol, an ED pharmacist reviews all cultures and performs a chart review of patient symptoms, diagnosis, and discharge antibiotics to determine whether the treatment was appropriate. A retrospective review of this process was performed to identify how often inappropriate treatment was recognized and intervened on by an ED pharmacist. Of the 180 cultures included, a total of 42 (23%) of empiric discharge treatments were considered inappropriate and required intervention. In 35 (83%) of 42 patients, the ED pharmacist was able to contact the patient and make appropriate changes; the remaining 7 patients were unable to be contacted, and no change could be made in their treatment. A chart review of all urine cultures with greater than 100 000 CFU/mL performed by an ED pharmacist helped identify inappropriate treatment in 23% of patients discharged to home with the diagnosis of urinary tract infection. Of these patients who had received inappropriate treatment, an ED pharmacist was able to intervene in 83% of cases. These data highlight the role of ED pharmacists in improving patient care after discharge. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. Operational and financial impact of physician screening in the ED.

    Science.gov (United States)

    Soremekun, Olanrewaju A; Biddinger, Paul D; White, Benjamin A; Sinclair, Julia R; Chang, Yuchiao; Carignan, Sarah B; Brown, David F M

    2012-05-01

    Physician screening is one of many front-end interventions being implemented to improve emergency department (ED) efficiency. We aimed to quantify the operational and financial impact of this intervention at an urban tertiary academic center. We conducted a 2-year before-after analysis of a physician screening system at an urban tertiary academic center with 90 000 annual visits. Financial impact consisted of the ED and inpatient revenue generated from the incremental capacity and the reduction in left without being seen (LWBS) rates. The ED and inpatient margin contribution as well as capital expenditure were based on available published data. We summarized the financial impact using net present value of future cash flows performing sensitivity analysis on the assumptions. Operational outcome measures were ED length of stay and percentage of LWBS. During the first year, we estimate the contribution margin of the screening system to be $2.71 million and the incremental operational cost to be $1.86 million. Estimated capital expenditure for the system was $1 200 000. The NPV of this investment was $2.82 million, and time to break even from the initial investment was 13 months. Operationally, despite a 16.7% increase in patient volume and no decrease in boarding hours, there was a 7.4% decrease in ED length of stay and a reduction in LWBS from 3.3% to 1.8%. In addition to improving operational measures, the implementation of a physician screening program in the ED allowed for an incremental increase in patient care capacity leading to an overall positive financial impact. Copyright © 2012 Elsevier Inc. All rights reserved.

  13. Modified process for refining niobium by electron beam

    International Nuclear Information System (INIS)

    Pinatti, D.G.; Takano, C.

    1982-01-01

    The experimental results, thermodynamic equilibrium and kinetic theory of the metal/gas interaction in refractory metals are reviewed. The adsorption and desorption of nitrogen, hydrogen and CO are reversible, whereas those of oxygen are irreversible, with adsorption of an oxygen atom and volatilisation of the metal oxide. Based upon this fact, a new electron beam refining technology is proposed for niobium, consisting of four points: preparation of an electrode by aluminothermic reduction; zone refining in the first melt; kinetic refining in subsequent melts and compact design of the refining plant. Experimental results from a 300 kW pilot plant were in complete agreement with the technology proposed, giving 2.4 times the productivity predicted by the conventional technology. (Author) [pt

  14. Grain refinement of AZ31 magnesium alloy by electromagnetic ...

    Indian Academy of Sciences (India)

    Low-frequency electromagnetic field; AZ31 magnesium alloy; Al4C3; grain refinement. Abstract. The effects of electromagnetic stirring and Al4C3 grain refiner on the grain refinement of semicontinuously cast AZ31 magnesium alloy were discussed in this investigation. The results indicate that electromagnetic stirring has an ...

  15. Refinement of RAIM via Implementation of Implicit Euler Method

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yoonhee; Kim, Han-Chul [Korea Institute of Nuclear and Safety, Daejeon (Korea, Republic of)

    2016-10-15

    The first approach is a mechanistic approach which is used in LIRIC in which more than 200 reactions are modeled in detail. This approach enables to perform the detailed analysis. However, it requires huge computation burden. The other approach is a simplified model approach which is used in the IMOD, ASTEC/IODE, and etc. Recently, KINS has developed RAIM (Radio-Active Iodine chemistry Model) based on the simplified model approach. Since the numerical analysis module in RAIM is based on the explicit Euler method, there are major issues on the stability of the module. Therefore, implementation of a stable numerical method becomes essential. In this study, RAIM is refined via implementation of implicit Euler method in which the Newton method is used to find the solutions at each time step. The refined RAIM is tested by comparing to RAIM based on the explicit Euler method. In this paper, RAIM was refined by implementing the implicit Euler method. At each time step of the method in the refined RAIM, the reaction kinetics equations are solved by the Newton method in which elements of the Jacobian matrix are expressed analytically. With the results of OECD-BIP P10T2 test, the refined RAIM was compared to RAIM with the explicit Euler method. The refined RAIM shows better agreement with the experimental data than those from the explicit Euler method. For the rapid change of pH during the experiment, the refined RAIM gives more realistic changes in the concentrations of chemical species than those from the explicit Euler method. In addition, in terms of computing time, the refined RAIM shows comparable computing time to that with explicit Euler method. These comparisons are attributed to ⁓10 times larger time step size used in the implicit Euler method, even though computation burden at each time step in the refined RAIM is much higher than that of the explicit Euler method. Compared to the experimental data, the refined RAIM still shows discrepancy, which are attributed

  16. Refinement of RAIM via Implementation of Implicit Euler Method

    International Nuclear Information System (INIS)

    Lee, Yoonhee; Kim, Han-Chul

    2016-01-01

    The first approach is a mechanistic approach which is used in LIRIC in which more than 200 reactions are modeled in detail. This approach enables to perform the detailed analysis. However, it requires huge computation burden. The other approach is a simplified model approach which is used in the IMOD, ASTEC/IODE, and etc. Recently, KINS has developed RAIM (Radio-Active Iodine chemistry Model) based on the simplified model approach. Since the numerical analysis module in RAIM is based on the explicit Euler method, there are major issues on the stability of the module. Therefore, implementation of a stable numerical method becomes essential. In this study, RAIM is refined via implementation of implicit Euler method in which the Newton method is used to find the solutions at each time step. The refined RAIM is tested by comparing to RAIM based on the explicit Euler method. In this paper, RAIM was refined by implementing the implicit Euler method. At each time step of the method in the refined RAIM, the reaction kinetics equations are solved by the Newton method in which elements of the Jacobian matrix are expressed analytically. With the results of OECD-BIP P10T2 test, the refined RAIM was compared to RAIM with the explicit Euler method. The refined RAIM shows better agreement with the experimental data than those from the explicit Euler method. For the rapid change of pH during the experiment, the refined RAIM gives more realistic changes in the concentrations of chemical species than those from the explicit Euler method. In addition, in terms of computing time, the refined RAIM shows comparable computing time to that with explicit Euler method. These comparisons are attributed to ⁓10 times larger time step size used in the implicit Euler method, even though computation burden at each time step in the refined RAIM is much higher than that of the explicit Euler method. Compared to the experimental data, the refined RAIM still shows discrepancy, which are attributed

  17. The European refining and distribution industry at the 2010 vista

    International Nuclear Information System (INIS)

    Lacour, J.J.; Tessmer, G.; Ward, I.

    1998-01-01

    Oil company chairmen belonging to the AFTP, DGMK and IP associations met together to debate about the future of the European refining industry. The following topics were discussed: is it the end of the refining crisis? Which uncertainties will have to be met? What is the situation of petroleum products supply and demand? What are the consumers' expectations? How to face the environmental constraints? Which future for the refining activities in Europe? Seven round-tables took place with the following themes: the factors of uncertainty in the future of refining activities, the petroleum products supply and demand (automotive fuels, fuel oils, lubricants), the refining activities and the supply of consumers (service stations and supermarkets), the situation of the European petroleum policy, the European refining industry and the public regulations (development of more efficient environmental approaches), the impact of environmental constraints and the technical solutions, and the future of the refining industry. (J.S.)

  18. Zone refining high-purity germanium

    International Nuclear Information System (INIS)

    Hubbard, G.S.; Haller, E.E.; Hansen, W.L.

    1977-10-01

    The effects of various parameters on germanium purification by zone refining have been examined. These parameters include the germanium container and container coatings, ambient gas and other operating conditions. Four methods of refining are presented which reproducibly yield 3.5 kg germanium ingots from which high purity (vertical barN/sub A/ - N/sub D/vertical bar less than or equal to2 x 10 10 cm -3 ) single crystals can be grown. A qualitative model involving binary and ternary complexes of Si, O, B, and Al is shown to account for the behavior of impurities at these low concentrations

  19. Refining processes of selected copper alloys

    Directory of Open Access Journals (Sweden)

    S. Rzadkosz

    2009-04-01

    Full Text Available The analysis of the refining effectiveness of the liquid copper and selected copper alloys by various micro additions and special refiningsubstances – was performed. Examinations of an influence of purifying, modifying and deoxidation operations performed in a metal bath on the properties of certain selected alloys based on copper matrix - were made. Refining substances, protecting-purifying slag, deoxidation and modifying substances containing micro additions of such elements as: zirconium, boron, phosphor, sodium, lithium, or their compounds introduced in order to change micro structures and properties of alloys, were applied in examinations. A special attention was directed to macro and micro structures of alloys, their tensile and elongation strength and hot-cracks sensitivity. Refining effects were estimated by comparing the effectiveness of micro structure changes with property changes of copper and its selected alloys from the group of tin bronzes.

  20. Using Telemedicine to Address Crowding in the ED.

    Science.gov (United States)

    Guss, Benjamin; Mishkin, David; Sharma, Rahul

    2016-11-01

    Some health systems are piloting telemedicine solutions in the ED to address crowding and decrease patient wait times. One new program, implemented at the Lisa Perry Emergency Center at New York Presbyterian (NYP) Weill Cornell Medical Center in New York, involves offering low-acuity patients the option of visiting an off-site physician via telemedicine hookup. Administrators note that the approach can get patients in and out of the ED within 30 minutes, and patients have thus far been highly satisfied with the approach. However, an earlier telemedicine program piloted at the University of San Diego Health System’s (UCSD) Hillcrest Hospital in 2013 got bogged down due to administrative and insurance reimbursement hurdles, although the approach showed enough promise that there is interest in restarting the program. In the NYP program, patients are identified as appropriate candidates for the program at triage. They can opt to be seen remotely or through traditional means in the ED’s fast-track section. Administrators note that patients with complex problems requiring extensive workups are not suitable for the telemedicine approach. The most challenging aspect of implementing a successful telemedicine program in the ED is getting the workflows right, according to administrators. An earlier ED-based telemedicine program piloted at UCSD ran into difficulties because the model required the involvement of two physicians, and some insurers did not want to pay for the telemedicine visits. However, patients were receptive.

  1. Adaptive mesh refinement for shocks and material interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Dai, William Wenlong [Los Alamos National Laboratory

    2010-01-01

    There are three kinds of adaptive mesh refinement (AMR) in structured meshes. Block-based AMR sometimes over refines meshes. Cell-based AMR treats cells cell by cell and thus loses the advantage of the nature of structured meshes. Patch-based AMR is intended to combine advantages of block- and cell-based AMR, i.e., the nature of structured meshes and sharp regions of refinement. But, patch-based AMR has its own difficulties. For example, patch-based AMR typically cannot preserve symmetries of physics problems. In this paper, we will present an approach for a patch-based AMR for hydrodynamics simulations. The approach consists of clustering, symmetry preserving, mesh continuity, flux correction, communications, management of patches, and load balance. The special features of this patch-based AMR include symmetry preserving, efficiency of refinement across shock fronts and material interfaces, special implementation of flux correction, and patch management in parallel computing environments. To demonstrate the capability of the AMR framework, we will show both two- and three-dimensional hydrodynamics simulations with many levels of refinement.

  2. Mitigating Higher Ed Cyber Attacks

    Science.gov (United States)

    Rogers, Gary; Ashford, Tina

    2015-01-01

    In this presentation we will discuss the many and varied cyber attacks that have recently occurred in the higher ed community. We will discuss the perpetrators, the victims, the impact and how these institutions have evolved to meet this threat. Mitigation techniques and defense strategies will be covered as will a discussion of effective security…

  3. I Failed the edTPA

    Science.gov (United States)

    Kuranishi, Adam; Oyler, Celia

    2017-01-01

    In this article, co-written by a teacher and a professor, the authors examine possible explanations for why Adam (first author), a New York City public school special educator, failed the edTPA, a teacher performance assessment required by all candidates for state certification. Adam completed a yearlong teaching residency where he was the special…

  4. Chinese refining capacity for Canadian heavy oil

    International Nuclear Information System (INIS)

    Bruce, G.W.

    2006-01-01

    This paper discussed China's refining capacity in relation to exports of Canadian heavy oil. Demand for oil is increasing throughout the world, and China is expected to consume 25 per cent of the projected yearly oil supplies. Alberta currently has an estimated 174 billion barrels of recoverable bitumen, and produces 1.06 million barrels per day. Production is expected to increase to 4.5 million barrels per day by the year 2020. Currently bitumen blends are refined and diluted with naphtha and sweet synthetic crude oil. Bitumen is a challenging feedstock for refineries, and requires thermal production methods or gasification processes. Primary conversion into sour synthetic crude is typically followed by hydrocracking and further refining into finished petroleum products. There are currently 50 refineries in China with a 7.4 million barrel per day capacity. Coastal refineries using imported crude oil have a 4 million barrel per day capacity. New facilities are being constructed and existing plants are being upgraded in order to process heavier and more sour crude oils. However, current refining capabilities in Chinese refineries have a limited ability for resid conversion. It was concluded that while China has a refining infrastructure, only refineries on the coast will use oil sands-derived feedstocks. However, there are currently opportunities to design refineries to match future feedstocks. tabs., figs

  5. On macromolecular refinement at subatomic resolution with interatomic scatterers

    Energy Technology Data Exchange (ETDEWEB)

    Afonine, Pavel V., E-mail: pafonine@lbl.gov; Grosse-Kunstleve, Ralf W.; Adams, Paul D. [Lawrence Berkeley National Laboratory, One Cyclotron Road, BLDG 64R0121, Berkeley, CA 94720 (United States); Lunin, Vladimir Y. [Institute of Mathematical Problems of Biology, Russian Academy of Sciences, Pushchino 142290 (Russian Federation); Urzhumtsev, Alexandre [IGMBC, 1 Rue L. Fries, 67404 Illkirch and IBMC, 15 Rue R. Descartes, 67084 Strasbourg (France); Faculty of Sciences, Nancy University, 54506 Vandoeuvre-lès-Nancy (France); Lawrence Berkeley National Laboratory, One Cyclotron Road, BLDG 64R0121, Berkeley, CA 94720 (United States)

    2007-11-01

    Modelling deformation electron density using interatomic scatters is simpler than multipolar methods, produces comparable results at subatomic resolution and can easily be applied to macromolecules. A study of the accurate electron-density distribution in molecular crystals at subatomic resolution (better than ∼1.0 Å) requires more detailed models than those based on independent spherical atoms. A tool that is conventionally used in small-molecule crystallography is the multipolar model. Even at upper resolution limits of 0.8–1.0 Å, the number of experimental data is insufficient for full multipolar model refinement. As an alternative, a simpler model composed of conventional independent spherical atoms augmented by additional scatterers to model bonding effects has been proposed. Refinement of these mixed models for several benchmark data sets gave results that were comparable in quality with the results of multipolar refinement and superior to those for conventional models. Applications to several data sets of both small molecules and macromolecules are shown. These refinements were performed using the general-purpose macromolecular refinement module phenix.refine of the PHENIX package.

  6. Review of Grain Refinement of Cast Metals Through Inoculation: Theories and Developments

    Science.gov (United States)

    Liu, Zhilin

    2017-10-01

    The inoculation method of grain refinement is widely used in research and industry. Because of its commercial and engineering importance, extensive research on the mechanisms/theories of grain refinement and development of effective grain refiners for diverse cast metals/alloys has been conducted. In 1999, Easton and St. John reviewed the mechanisms of grain refinement of cast Al alloys. Since then, grain refinement in alloys of Al, Mg, Fe, Ti, Cu, and Zn has evolved a lot. However, there is still no full consensus on the mechanisms/theories of grain refinement. Moreover, some new grain refiners developed based on the theories do not ensure efficient grain refinement. Thus, the factors that contribute to grain refinement are still not fully understood. Clarification of the prerequisite issues that occur in grain refinement is required using recent theories. This review covers multiple metals/alloys and developments in grain refinement from the last twenty years. The characteristics of effective grain refiners are considered from four perspectives: effective particle/matrix wetting configuration, sufficiently powerful segregating elements, preferential crystallographic matching, and geometrical features of effective nucleants. Then, recent mechanisms/theories on the grain refinement of cast metals/alloys are reviewed, including the peritectic-related, hypernucleation, inert nucleant, and constitutional supercooling-driven theories. Further, developments of deterministic and probabilistic modeling and nucleation crystallography in the grain refinement of cast metals are reviewed. Finally, the latest progress in the grain refinement of cast Zn and its alloys is described, and future work on grain refinement is summarized.

  7. Total antioxidant content of alternatives to refined sugar.

    Science.gov (United States)

    Phillips, Katherine M; Carlsen, Monica H; Blomhoff, Rune

    2009-01-01

    Oxidative damage is implicated in the etiology of cancer, cardiovascular disease, and other degenerative disorders. Recent nutritional research has focused on the antioxidant potential of foods, while current dietary recommendations are to increase the intake of antioxidant-rich foods rather than supplement specific nutrients. Many alternatives to refined sugar are available, including raw cane sugar, plant saps/syrups (eg, maple syrup, agave nectar), molasses, honey, and fruit sugars (eg, date sugar). Unrefined sweeteners were hypothesized to contain higher levels of antioxidants, similar to the contrast between whole and refined grain products. To compare the total antioxidant content of natural sweeteners as alternatives to refined sugar. The ferric-reducing ability of plasma (FRAP) assay was used to estimate total antioxidant capacity. Major brands of 12 types of sweeteners as well as refined white sugar and corn syrup were sampled from retail outlets in the United States. Substantial differences in total antioxidant content of different sweeteners were found. Refined sugar, corn syrup, and agave nectar contained minimal antioxidant activity (sugar had a higher FRAP (0.1 mmol/100 g). Dark and blackstrap molasses had the highest FRAP (4.6 to 4.9 mmol/100 g), while maple syrup, brown sugar, and honey showed intermediate antioxidant capacity (0.2 to 0.7 mmol FRAP/100 g). Based on an average intake of 130 g/day refined sugars and the antioxidant activity measured in typical diets, substituting alternative sweeteners could increase antioxidant intake an average of 2.6 mmol/day, similar to the amount found in a serving of berries or nuts. Many readily available alternatives to refined sugar offer the potential benefit of antioxidant activity.

  8. Investment in exploration-production and refining 2015

    International Nuclear Information System (INIS)

    Maisonnier, G.; Hureau, G.; Serbutoviez, S.; Silva, C.

    2016-01-01

    IFPEN analyses in this study the 2015 evolution of global investment in the field of exploration-production and refining: - Changes in oil and gas prices; - Investment in Exploration/Production: the end of an upward cycle; - Drilling and the global drilling market, upstream activities and markets; - 2015, a breath of fresh air for refining

  9. Report from the commission about the industrial and financial project of EdF

    International Nuclear Information System (INIS)

    2004-01-01

    This report takes stock of the work carried out by the commission appointed by the French ministry of economy, finances and industry about the industrial and financial project of Electricite de France (EdF) in the framework of the liberalization of European energy markets. The report presents the conclusions of the commission about EdF's position in the new competition context, about the financial position of the group and about the foreseeable strategic options and their consequences in terms of equity fund needs. 5 appendixes present: the evolution of electricity prices, EdF and the energy policy, the electricity market and the competition in Europe, the EdF group: presentation and main adaptation stakes, the financial situation of EdF group. (J.S.)

  10. EDs find physical therapists are an underused asset for musculoskeletal injuries, patient education.

    Science.gov (United States)

    2011-04-01

    Some EDs are finding that the unique skill sets offered by physical therapists (PT) can be an asset to emergency care while also improving the patient experience. Experts say PTs are particularly valuable in the management of musculoskeletal pain and injuries, but they are also being used for wound care, gait training, and balance assessment. ED administrators say consistent, daily coverage is essential to making a PT program successful; otherwise, ED clinicians will neglect to use their services. PTs need to be comfortable with proactively marketing their skills to other ED clinicians who may not be used to having access to this resource. Experts say PT services in the ED can be reimbursed at a level that is consistent with reimbursement in other inpatient and outpatient settings.

  11. A Preliminary Examination of Loss of Control Eating Disorder (LOC-ED) in Middle Childhood

    Science.gov (United States)

    Matherne, Camden E.; Tanofsky-Kraff, Marian; Altschul, Anne M.; Shank, Lisa M.; Schvey, Natasha A.; Brady, Sheila M.; Galescu, Ovidiu; Demidowich, Andrew P.; Yanovski, Susan Z.; Yanovski, Jack A.

    2015-01-01

    Loss of Control Eating Disorder (LOC-ED) has been proposed as a diagnostic category for children 6–12y with binge-type eating. However, characteristics of youth with LOC-ED have not been examined. We tested the hypothesis that the proposed criteria for LOC-ED would identify children with greater adiposity, more disordered eating attitudes, and greater mood disturbance than those without LOC-ED. Participants were 251 youth (10.29y ± 1.54, 53.8% female, 57.8 % White, 35.5% Black, 2.0% Asian, 4.8% Hispanic, 53.0% overweight). Youth were interviewed regarding eating attitudes and behaviors, completed questionnaires to assess general psychopathology, and underwent measurements of body fat mass. Using previously proposed criteria for LOC-ED, children were classified as LOC-ED (n = 19), LOC in the absence of the full disorder (subLOC, n = 33), and youth not reporting LOC (noLOC, n = 199). LOC-ED youth had higher BMIz (p = 0.001) and adiposity (p = 0.003) and reported greater disordered eating concerns (p eating attitudes (p = 0.02). SubLOC youth had greater disordered eating concerns (p eating cognitions and anthropometric measures compared to youth without LOC-ED. Longitudinal studies are needed to determine if those with LOC-ED are at particularly increased risk for progression of disordered eating and excess weight gain. PMID:25913008

  12. A preliminary examination of Loss of Control Eating Disorder (LOC-ED) in middle childhood.

    Science.gov (United States)

    Matherne, Camden E; Tanofsky-Kraff, Marian; Altschul, Anne M; Shank, Lisa M; Schvey, Natasha A; Brady, Sheila M; Galescu, Ovidiu; Demidowich, Andrew P; Yanovski, Susan Z; Yanovski, Jack A

    2015-08-01

    Loss of Control Eating Disorder (LOC-ED) has been proposed as a diagnostic category for children 6-12years with binge-type eating. However, characteristics of youth with LOC-ED have not been examined. We tested the hypothesis that the proposed criteria for LOC-ED would identify children with greater adiposity, more disordered eating attitudes, and greater mood disturbance than those without LOC-ED. Participants were 251 youth (10.29years±1.54, 53.8% female, 57.8% White, 35.5% Black, 2.0% Asian, 4.8% Hispanic, 53.0% overweight). Youth were interviewed regarding eating attitudes and behaviors, completed questionnaires to assess general psychopathology, and underwent measurements of body fat mass. Using previously proposed criteria for LOC-ED, children were classified as LOC-ED (n=19), LOC in the absence of the full disorder (subLOC, n=33), and youth not reporting LOC (noLOC, n=199). LOC-ED youth had higher BMIz (p=0.001) and adiposity (p=0.003) and reported greater disordered eating concerns (pdisordered eating attitudes (p=0.02). SubLOC youth had greater disordered eating concerns (pdisordered eating cognitions and anthropometric measures compared to youth without LOC-ED. Longitudinal studies are needed to determine if those with LOC-ED are at particularly increased risk for progression of disordered eating and excess weight gain. Published by Elsevier Ltd.

  13. Modelling the growth of Populus species using Ecosystem Demography (ED) model

    Science.gov (United States)

    Wang, D.; Lebauer, D. S.; Feng, X.; Dietze, M. C.

    2010-12-01

    Hybrid poplar plantations are an important source being evaluated for biomass production. Effective management of such plantations requires adequate growth and yield models. The Ecosystem Demography model (ED) makes predictions about the large scales of interest in above- and belowground ecosystem structure and the fluxes of carbon and water from a description of the fine-scale physiological processes. In this study, we used a workflow management tool, the Predictive Ecophysiological Carbon flux Analyzer (PECAn), to integrate literature data, field measurement and the ED model to provide predictions of ecosystem functioning. Parameters for the ED ensemble runs were sampled from the posterior distribution of ecophysiological traits of Populus species compiled from the literature using a Bayesian meta-analysis approach. Sensitivity analysis was performed to identify the parameters which contribute the most to the uncertainties of the ED model output. Model emulation techniques were used to update parameter posterior distributions using field-observed data in northern Wisconsin hybrid poplar plantations. Model results were evaluated with 5-year field-observed data in a hybrid poplar plantation at New Franklin, MO. ED was then used to predict the spatial variability of poplar yield in the coterminous United States (United States minus Alaska and Hawaii). Sensitivity analysis showed that root respiration, dark respiration, growth respiration, stomatal slope and specific leaf area contribute the most to the uncertainty, which suggests that our field measurements and data collection should focus on these parameters. The ED model successfully captured the inter-annual and spatial variability of the yield of poplar. Analyses in progress with the ED model focus on evaluating the ecosystem services of short-rotation woody plantations, such as impacts on soil carbon storage, water use, and nutrient retention.

  14. Hirshfeld atom refinement.

    Science.gov (United States)

    Capelli, Silvia C; Bürgi, Hans-Beat; Dittrich, Birger; Grabowsky, Simon; Jayatilaka, Dylan

    2014-09-01

    Hirshfeld atom refinement (HAR) is a method which determines structural parameters from single-crystal X-ray diffraction data by using an aspherical atom partitioning of tailor-made ab initio quantum mechanical molecular electron densities without any further approximation. Here the original HAR method is extended by implementing an iterative procedure of successive cycles of electron density calculations, Hirshfeld atom scattering factor calculations and structural least-squares refinements, repeated until convergence. The importance of this iterative procedure is illustrated via the example of crystalline ammonia. The new HAR method is then applied to X-ray diffraction data of the dipeptide Gly-l-Ala measured at 12, 50, 100, 150, 220 and 295 K, using Hartree-Fock and BLYP density functional theory electron densities and three different basis sets. All positions and anisotropic displacement parameters (ADPs) are freely refined without constraints or restraints - even those for hydrogen atoms. The results are systematically compared with those from neutron diffraction experiments at the temperatures 12, 50, 150 and 295 K. Although non-hydrogen-atom ADPs differ by up to three combined standard uncertainties (csu's), all other structural parameters agree within less than 2 csu's. Using our best calculations (BLYP/cc-pVTZ, recommended for organic molecules), the accuracy of determining bond lengths involving hydrogen atoms from HAR is better than 0.009 Å for temperatures of 150 K or below; for hydrogen-atom ADPs it is better than 0.006 Å(2) as judged from the mean absolute X-ray minus neutron differences. These results are among the best ever obtained. Remarkably, the precision of determining bond lengths and ADPs for the hydrogen atoms from the HAR procedure is comparable with that from the neutron measurements - an outcome which is obtained with a routinely achievable resolution of the X-ray data of 0.65 Å.

  15. Biomolecular structure refinement using the GROMOS simulation software

    International Nuclear Information System (INIS)

    Schmid, Nathan; Allison, Jane R.; Dolenc, Jožica; Eichenberger, Andreas P.; Kunz, Anna-Pitschna E.; Gunsteren, Wilfred F. van

    2011-01-01

    For the understanding of cellular processes the molecular structure of biomolecules has to be accurately determined. Initial models can be significantly improved by structure refinement techniques. Here, we present the refinement methods and analysis techniques implemented in the GROMOS software for biomolecular simulation. The methodology and some implementation details of the computation of NMR NOE data, 3 J-couplings and residual dipolar couplings, X-ray scattering intensities from crystals and solutions and neutron scattering intensities used in GROMOS is described and refinement strategies and concepts are discussed using example applications. The GROMOS software allows structure refinement combining different types of experimental data with different types of restraining functions, while using a variety of methods to enhance conformational searching and sampling and the thermodynamically calibrated GROMOS force field for biomolecular simulation.

  16. Biomolecular structure refinement using the GROMOS simulation software

    Energy Technology Data Exchange (ETDEWEB)

    Schmid, Nathan; Allison, Jane R.; Dolenc, Jozica; Eichenberger, Andreas P.; Kunz, Anna-Pitschna E.; Gunsteren, Wilfred F. van, E-mail: wfvgn@igc.phys.chem.ethz.ch [Swiss Federal Institute of Technology ETH, Laboratory of Physical Chemistry (Switzerland)

    2011-11-15

    For the understanding of cellular processes the molecular structure of biomolecules has to be accurately determined. Initial models can be significantly improved by structure refinement techniques. Here, we present the refinement methods and analysis techniques implemented in the GROMOS software for biomolecular simulation. The methodology and some implementation details of the computation of NMR NOE data, {sup 3}J-couplings and residual dipolar couplings, X-ray scattering intensities from crystals and solutions and neutron scattering intensities used in GROMOS is described and refinement strategies and concepts are discussed using example applications. The GROMOS software allows structure refinement combining different types of experimental data with different types of restraining functions, while using a variety of methods to enhance conformational searching and sampling and the thermodynamically calibrated GROMOS force field for biomolecular simulation.

  17. Pakistan stepping up expansion of refining, transportation sectors

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that Pakistan is taking steps to speed expansion of its refining and oil transportation infrastructure. While the country has made significant progress toward energy self-efficiency by boosting oil and gas production it still must modernize and expand an aging, inadequate refining sector to meet rapidly growing demand for refined products. Pakistan's government has disclosed plans to build two refineries in the country, one at Rawalpindi near a string of recent oil discoveries, the other somewhere in the southern part of the country, likely Karachi. At the same time, efforts are proceeding to upgrade Pakistan's refineries. In addition, Pakistani state companies continue to press joint ventures in refining and marketing with foreign companies and expand downstream ties with neighbors that are key oil and gas exporters

  18. New Process for Grain Refinement of Aluminum. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Joseph A. Megy

    2000-09-22

    A new method of grain refining aluminum involving in-situ formation of boride nuclei in molten aluminum just prior to casting has been developed in the subject DOE program over the last thirty months by a team consisting of JDC, Inc., Alcoa Technical Center, GRAS, Inc., Touchstone Labs, and GKS Engineering Services. The Manufacturing process to make boron trichloride for grain refining is much simpler than preparing conventional grain refiners, with attendant environmental, capital, and energy savings. The manufacture of boride grain refining nuclei using the fy-Gem process avoids clusters, salt and oxide inclusions that cause quality problems in aluminum today.

  19. 34 CFR 110.1 - What is the purpose of ED's age discrimination regulations?

    Science.gov (United States)

    2010-07-01

    ... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE General § 110.1 What is the purpose of ED's age discrimination regulations? The purpose of these regulations is to set out ED's rules for implementing the Age... 34 Education 1 2010-07-01 2010-07-01 false What is the purpose of ED's age discrimination...

  20. A Chinese translation of the EdFED-Q and assessment of equivalence.

    Science.gov (United States)

    Lin, Li-Chan; Chang, Chia-Chi

    2003-01-01

    The purpose of this study was to translate the Edinburgh Feeding Evaluation in Dementia Questionnaire (EdFED-Q) from the original English into a Chinese language version and to assess the equivalence of the English and Chinese EdFED-Q versions. To use a directly translated instrument without minimal explanation of the procedures for determining the equivalence between the original and secondary language instrument is questionable. Ensuring equivalence of a translated Chinese version of the EdFED-Q for patients with dementia is an essential prerequisite for identifying culturally specific expressions of feeding difficulty under investigation. Phase 1 consisted of experts doing the initial translation into Chinese and then English back-translations of the questionnaire. Six experts determined the equality of the Chinese and English versions, and five monolingual nurses provided information for the C-EdFED-Q. In phase 2, two bilingual gerontological nurses rated 33 residents with dementia to determine equivalence across time. In phase 3, three groups of bilingual nurses used the Chinese, English, and finally both versions simultaneously to judge a model case's feeding behavior on the videotape. In phase 1, the rating on the equality of the items on the Chinese and English versions was 0.969. In phase 2, kappa coefficients for all items on the C-EdFED-Q and E-EdFED-Q ranged from 0.44 to 1.00. In determining the consistency of the scores for the C-EdFED-Q and E-EdFED-Q between the two raters across time, the intraclass correlation coefficient for the absolute agreement was found to range from 0.85 to 0.90. In phase 3, except for items 6 and 9, all items showed no significant difference among the three groups. Further studies to assess the relationship between constructs and to compare it with known and predicted relationships are recommended.

  1. Point-of-Care Ultrasonography for Evaluation of Acute Dyspnea in the ED.

    Science.gov (United States)

    Zanobetti, Maurizio; Scorpiniti, Margherita; Gigli, Chiara; Nazerian, Peiman; Vanni, Simone; Innocenti, Francesca; Stefanone, Valerio T; Savinelli, Caterina; Coppa, Alessandro; Bigiarini, Sofia; Caldi, Francesca; Tassinari, Irene; Conti, Alberto; Grifoni, Stefano; Pini, Riccardo

    2017-06-01

    Acute dyspnea is a common symptom in the ED. The standard approach to dyspnea often relies on radiologic and laboratory results, causing excessive delay before adequate therapy is started. Use of an integrated point-of-care ultrasonography (PoCUS) approach can shorten the time needed to formulate a diagnosis, while maintaining an acceptable safety profile. Consecutive adult patients presenting with dyspnea and admitted after ED evaluation were prospectively enrolled. The gold standard was the final diagnosis assessed by two expert reviewers. Two physicians independently evaluated the patient; a sonographer performed an ultrasound evaluation of the lung, heart, and inferior vena cava, while the treating physician requested traditional tests as needed. Time needed to formulate the ultrasound and the ED diagnoses was recorded and compared. Accuracy and concordance of the ultrasound and the ED diagnoses were calculated. A total of 2,683 patients were enrolled. The average time needed to formulate the ultrasound diagnosis was significantly lower than that required for ED diagnosis (24 ± 10 min vs 186 ± 72 min; P = .025). The ultrasound and the ED diagnoses showed good overall concordance (κ = 0.71). There were no statistically significant differences in the accuracy of PoCUS and the standard ED evaluation for the diagnosis of acute coronary syndrome, pneumonia, pleural effusion, pericardial effusion, pneumothorax, and dyspnea from other causes. PoCUS was significantly more sensitive for the diagnosis of heart failure, whereas a standard ED evaluation performed better in the diagnosis of COPD/asthma and pulmonary embolism. PoCUS represents a feasible and reliable diagnostic approach to the patient with dyspnea, allowing a reduction in time to diagnosis. This protocol could help to stratify patients who should undergo a more detailed evaluation. Copyright © 2017 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

  2. Active Intervention Can Decrease Burnout In Ed Nurses.

    Science.gov (United States)

    Wei, Rong; Ji, Hong; Li, Jianxin; Zhang, Liyao

    2017-03-01

    The aim of this study was to evaluate whether active intervention can decrease job burnout and improve performance among ED nurses. This study was carried out in the emergency departments of 3 hospitals randomly selected from 8 comprehensive high-level hospitals in Jinan, China. A total of 102 nurses were enrolled and randomly divided into control and intervention groups. For 6 months, nurses in intervention groups were treated with ordinary treatment plus comprehensive management, whereas nurses in the control group were treated with ordinary management, respectively. Questionnaires were sent and collected at baseline and at the end of the study. The Student t test was used to evaluate the effect of comprehensive management in decreasing burnout. All ED nurses showed symptoms of job burnout at different levels. Our data indicated that comprehensive management significantly decreased emotional exhaustion and depersonalization (P burnout in ED nurses and contribute to relieving work-related stress and may further protect against potential mental health problems. Copyright © 2016 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

  3. Method of optimization of the natural gas refining process

    Energy Technology Data Exchange (ETDEWEB)

    Sadykh-Zade, E.S.; Bagirov, A.A.; Mardakhayev, I.M.; Razamat, M.S.; Tagiyev, V.G.

    1980-01-01

    The SATUM (automatic control system of technical operations) system introduced at the Shatlyk field should assure good quality of gas refining. In order to optimize the natural gas refining processes and experimental-analytical method is used in compiling the mathematical descriptions. The program, compiled in Fortran language, in addition to parameters of optimal conditions gives information on the yield of concentrate and water, concentration and consumption of DEG, composition and characteristics of the gas and condensate. The algorithm for calculating optimum engineering conditions of gas refining is proposed to be used in ''advice'' mode, and also for monitoring progress of the gas refining process.

  4. Optimal algebraic multilevel preconditioning for local refinement along a line

    NARCIS (Netherlands)

    Margenov, S.D.; Maubach, J.M.L.

    1995-01-01

    The application of some recently proposed algebraic multilevel methods for the solution of two-dimensional finite element problems on nonuniform meshes is studied. The locally refined meshes are created by the newest vertex mesh refinement method. After the introduction of this refinement technique

  5. RBT—A Tool for Building Refined Buneman Trees

    DEFF Research Database (Denmark)

    Besenbacher, Søren; Mailund; Westh-Nielsen, Lasse

    2005-01-01

    We have developed a tool implementing an efficient algorithm for refined Buneman tree reconstruction. The algorithm—which has the same complexity as the neighbour-joining method and the (plain) Buneman tree construction—enables refined Buneman tree reconstruction on large taxa sets....

  6. Occupational stress in the ED: a systematic literature review.

    Science.gov (United States)

    Basu, Subhashis; Qayyum, Hasan; Mason, Suzanne

    2017-07-01

    Occupational stress is a major modern health and safety challenges. While the ED is known to be a high-pressure environment, the specific organisational stressors which affect ED staff have not been established. We conducted a systematic review of literature examining the sources of organisational stress in the ED, their link to adverse health outcomes and interventions designed to address them. A narrative review of contextual factors that may contribute to occupational stress was also performed. All articles written in English, French or Spanish were eligible for conclusion. Study quality was graded using a modified version of the Newcastle-Ottawa Scale. Twenty-five full-text articles were eligible for inclusion in our systematic review. Most were of moderate quality, with two low-quality and two high-quality studies, respectively. While high demand and low job control were commonly featured, other studies demonstrated the role of insufficient support at work, effort-reward imbalance and organisational injustice in the development of adverse health and occupational outcomes. We found only one intervention in a peer-reviewed journal evaluating a stress reduction programme in ED staff. Our review provides a guide to developing interventions that target the origins of stress in the ED. It suggests that those which reduce demand and increase workers' control over their job, improve managerial support, establish better working relationships and make workers' feel more valued for their efforts could be beneficial. We have detailed examples of successful interventions from other fields which may be applicable to this setting. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  7. Ectodermal dysplasia (ED) syndrome.

    Science.gov (United States)

    Chee, Siew-Yin; Wanga, Chung-Hsing; Lina, Wei-De; Tsaia, Fuu-Jen

    2014-01-01

    Ectodermal dysplasia (ED) syndrome comprises a large, heterogeneous group of inherited disorders that are defined by primary defects in the development of 2 or more tissues derived from the embryonic ectoderm. The tissues primarily involved are the skin and its appendages (including hair follicles, eccrine glands, sebaceous glands, nails) and teeth. The clinical features include sparse hair, abnormal or missing teeth, and an inability to sweat due to lack of sweat glands. One such case report of ectodermal dysplasia is presented here.

  8. India's refining prospects linked to economic growth

    International Nuclear Information System (INIS)

    Lewis, E.

    1996-01-01

    International investors assess refining ventures in India the same way they do comparable projects elsewhere in the world: according to their expectations about investment returns. By that standard, India's appeal is mixed, although its need for some measure of additional refining capacity seems certain. The success of future refinery investments will depend heavily on the government's commitment to policies allowing the economy to grow faster than the population. Unless accompanied by economic growth, expected increases in the population will not automatically raise demand for petroleum products. Decisions about investments in India's refining sector, therefore, must carefully weigh market fundamentals, the business environment, and likely investment performance. This paper reviews the market for the various products and predicts new economic trends

  9. CriticalEd

    DEFF Research Database (Denmark)

    Kjellberg, Caspar Mølholt; Meredith, David

    2014-01-01

    . Since the comments are not input sequentially, with regard to position, but in arbitrary order, this list must be sorted by copy/pasting the rows into place—an error-prone and time-consuming process. Scholars who produce critical editions typically use off-the-shelf music notation software......The best text method is commonly applied among music scholars engaged in producing critical editions. In this method, a comment list is compiled, consisting of variant readings and editorial emendations. This list is maintained by inserting the comments into a document as the changes are made......, consisting of a Sibelius plug-in, a cross-platform application, called CriticalEd, and a REST-based solution, which handles data storage/retrieval. A prototype has been tested at the Danish Centre for Music Publication, and the results suggest that the system could greatly improve the efficiency...

  10. Psychological and psychopathological variables associated with eating disorders (ED

    Directory of Open Access Journals (Sweden)

    Antonio Fernández-Delgado

    2016-07-01

    Full Text Available Objective: The aim of this study was to compare some psychological and psychopathological variables usually associated with different types of patients with eating disorders (ED. A total of 22 variables (psychological, psychopathological and specifically related to TCA were analyzed in three groups of patients with anorexia nervosa (AN, bulimia nervosa (BN and eating disorders not otherwise specified (EDNOS. Method: The sample consisted of 76 patients diagnosed with ED (mean age 20.13 ± 6.28 years; 69 women and 7 men. The following questionnaires were administered: Rosenberg's Self-Esteem Scale (SES, Symptom Checklist-90-Revised (SCL-90-R, Beck's Depression Inventory (BDI, State-Trait Anxiety Inventory (STAI, Body Shape Questionnaire (BSQ, Body Appreciation Scale (BAS, Eating Disorder Inventory-2 (EDI-2 and Body Image Quality of Life Inventory (BIQLI-SP. Results: Generally no significant differences between groups, except for the variables related to the BSQ and EDI-2 questionnaires, were found. The study of the correlations among the different variables specifically related to eating disorders and others, showed differences between groups. Conclusions: The present study shows few differences with respect to psychopathological symptoms among the different types of ED. Bearing in mind future studies, it would be interesting to use a bigger sample size, to include more men, and to distinguish between restricted/purging types of ED.

  11. Real time analysis under EDS

    International Nuclear Information System (INIS)

    Schneberk, D.

    1985-07-01

    This paper describes the analysis component of the Enrichment Diagnostic System (EDS) developed for the Atomic Vapor Laser Isotope Separation Program (AVLIS) at Lawrence Livermore National Laboratory (LLNL). Four different types of analysis are performed on data acquired through EDS: (1) absorption spectroscopy on laser-generated spectral lines, (2) mass spectrometer analysis, (3) general purpose waveform analysis, and (4) separation performance calculations. The information produced from this data includes: measures of particle density and velocity, partial pressures of residual gases, and overall measures of isotope enrichment. The analysis component supports a variety of real-time modeling tasks, a means for broadcasting data to other nodes, and a great degree of flexibility for tailoring computations to the exact needs of the process. A particular data base structure and program flow is common to all types of analysis. Key elements of the analysis component are: (1) a fast access data base which can configure all types of analysis, (2) a selected set of analysis routines, (3) a general purpose data manipulation and graphics package for the results of real time analysis. Each of these components are described with an emphasis upon how each contributes to overall system capability. 3 figs

  12. Systematic Review of ED-based Intimate Partner Violence Intervention Research

    Directory of Open Access Journals (Sweden)

    Esther K. Choo,

    2015-12-01

    Full Text Available Introduction: Assessment reactivity may be a factor in the modest results of brief interventions for substance use in the emergency department (ED. The presence of assessment reactivity in studies of interventions for intimate partner violence (IPV has not been studied. Our objectives were to identify ED IPV intervention studies and evaluate the presence of a consistently positive effect on the control groups. Methods: We performed a systematic search of electronic databases for English=language intervention studies addressing IPV in the ED published since 1990. Study selection and assessment of methodologic quality were performed by two independent reviewers. Data extraction was performed by one reviewer and then independently checked for completeness and accuracy by a second reviewer. Results: Of 3,620 unique manuscripts identified by database search, 667 underwent abstract review and 12 underwent full-text review. Only three met full eligibility criteria; data on the control arm were available for two studies. In these two studies, IPV-related outcomes improved for both the experimental and control condition. Conclusion: The paucity of controlled trials of IPV precluded a robust evaluation for assessment reactivity. This study highlighted a critical gap in ED research on IPV.

  13. Electroencephalography findings in patients presenting to the ED for evaluation of seizures.

    Science.gov (United States)

    Kadambi, Pooja; Hart, Kimberly W; Adeoye, Opeolu M; Lindsell, Christopher J; Knight, William A

    2015-01-01

    Status epilepticus is a life-threatening, time-sensitive emergency. Acquiring an electroencephalogram (EEG) in the emergency department (ED) could impact therapeutic and disposition decisions for patients with suspected status epilepticus. The objective of this study is to estimate the proportion of EEGs diagnostic for seizures in patients presenting to an ED with a complaint of seizures. This retrospective chart review included adults presenting to the ED of an urban, academic, tertiary care hospital with suspected seizures or status epilepticus, who received an EEG within 24 hours of hospital admission. Data abstraction was performed by a single, trained, nonblinded abstractor. Seizures were defined as an epileptologist's diagnosis of either seizures or status epilepticus on EEG. The proportion of patients with seizures is given with confidence interval95 (CI95). Of 120 included patients, 67 (56%) had a history of epilepsy. Mean age was 52 years (SD, 16), 58% were White, and 61% were male. Within 24 hours, 3% had an EEG diagnostic for seizures. Electroencephalogram was obtained in the ED in 32 (27%) of 120 (CI95, 19%-35%), and 2 (6%) of 32 (CI95, 1%-19%) had seizures. Electroencephalogram was performed inpatient for 88 (73%) of 120 (CI95, 65%-81%), and 2 (2%) of 88 (CI95, 0.5%-7.1%) had seizures. Only 3% of ED patients with suspected seizures or status epilepticus had EEG confirmation of seizures within 24 hours. Early EEG acquisition in the ED may identify a group of patients amenable to ED observation and subsequent discharge from the hospital. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Refinement-Animation for Event-B - Towards a Method of Validation

    DEFF Research Database (Denmark)

    Hallerstede, Stefan; Leuschel, Michael; Plagge, Daniel

    2010-01-01

    We provide a detailed description of refinement in Event-B, both as a contribution in itself and as a foundation for the approach to simultaneous animation of multiple levels of refinement that we propose. We present an algorithm for simultaneous multi-level animation of refinement, and show how ...

  15. Cleaning Data with OpenRefine

    Directory of Open Access Journals (Sweden)

    Seth van Hooland

    2013-08-01

    Full Text Available Duplicate records, empty values and inconsistent formats are phenomena we should be prepared to deal with when using historical data sets. This lesson will teach you how to discover inconsistencies in data contained within a spreadsheet or a database. As we increasingly share, aggregate and reuse data on the web, historians will need to respond to data quality issues which inevitably pop up. Using a program called OpenRefine, you will be able to easily identify systematic errors such as blank cells, duplicates, spelling inconsistencies, etc. OpenRefine not only allows you to quickly diagnose the accuracy of your data, but also to act upon certain errors in an automated manner.

  16. Outlook for Canadian refining

    International Nuclear Information System (INIS)

    Boje, G.

    1998-01-01

    The petroleum supply and demand balance was discussed and a comparison between Canadian and U.S. refineries was provided. The impact of changing product specifications on the petroleum industry was also discussed. The major changes include sulphur reductions in gasoline, benzene and MMT additives. These changes have been made in an effort to satisfy environmental needs. Geographic margin variations in refineries between east and west were reviewed. An overview of findings from the Solomon Refining Study of Canadian and American refineries, which has been very complimentary of the Canadian refining industry, was provided. From this writer's point of view refinery utilization has improved but there is a threat from increasing efficiency of US competitors. Environmental issues will continue to impact upon the industry and while the chances for making economic returns on investment are good for the years ahead, it will be a challenge to maintain profitability

  17. Oil refining in U.S. foreign-trade zones

    International Nuclear Information System (INIS)

    Powell, S.J.; Potter, T.J.

    1991-01-01

    With the crude-oil import supply being as inexpensive as it is today, relative to domestic supply, many independents have been sourcing their crude-oil needs from abroad and have found it an opportune time to step up their level of refining activity. To further enhance their competitive position with respect to foreign refineries, certain domestic refiners have discovered the operational benefits and savings that result from having a refinery designated as a foreign-trade zone (FTZ) under the Foreign-Trade Zones Act of 1934, as amended. This paper examines the history and use of foreign-trade subzones for refining activities

  18. English-Chinese oil refining dictionary. [English-Chinese

    Energy Technology Data Exchange (ETDEWEB)

    Chou, P; Zing, Z [eds.

    1979-01-01

    The dictionary is a collection of many disciplines but specialized in the terminology related to petroleum refining. It contains terms in areas such as refining, factory equipment and installation, petroleum products and test analysis, and instrument automation. It also contains terms in areas of petrochemistry, oil storage and transport, computer technology, and environmental protection. The total number of terms collected was approximately 53,000.

  19. British Columbia Petroleum Corporation annual report 1992-1993

    International Nuclear Information System (INIS)

    1993-01-01

    The British Columbia Petroleum Corporation is a provincial Crown agency whose principal mandate is to facilitate and monitor the sale of natural gas, and to act as a central source of information specific to the natural gas industry for the benefit of all industry participants. The Corporation's activities for the year ending March 31, 1993 are summarized. With the devolution of the Corporation's marketing functions in 1990 to CanWest Gas Supply Inc. and the deregulation of the natural gas market, the Corporation no longer markets natural gas and byproducts, but performs a number of administrative functions on behalf of the province. These include issuing acquisition orders and determining the respective netback prices for the purpose of calculating royalties; collection of a production-related levy; collection of data regarding all sale transactions; monitoring of all production, sales and marketing costs; and information gathering for all sectors of the industry. In 1992/93, a total of 27 companies remained with the Corporation, representing 111 individual gas purchase agreements for a combined deliverability of 1,769,300 m 3 /d. At fiscal year end, a total of 713 acquisition orders were being monitored and 20 findings of producer support were issued in response to netback sales applications. Industry volume throughputs increased 8.7% over the previous year and the average netback price rose to $44.87 per 1,000 m 3 . Financial statements are included. 2 figs., 1 tab

  20. Contextual Distance Refining for Image Retrieval

    KAUST Repository

    Islam, Almasri

    2014-01-01

    Recently, a number of methods have been proposed to improve image retrieval accuracy by capturing context information. These methods try to compensate for the fact that a visually less similar image might be more relevant because it depicts the same object. We propose a new quick method for refining any pairwise distance metric, it works by iteratively discovering the object in the image from the most similar images, and then refine the distance metric accordingly. Test show that our technique improves over the state of art in terms of accuracy over the MPEG7 dataset.

  1. Contextual Distance Refining for Image Retrieval

    KAUST Repository

    Islam, Almasri

    2014-09-16

    Recently, a number of methods have been proposed to improve image retrieval accuracy by capturing context information. These methods try to compensate for the fact that a visually less similar image might be more relevant because it depicts the same object. We propose a new quick method for refining any pairwise distance metric, it works by iteratively discovering the object in the image from the most similar images, and then refine the distance metric accordingly. Test show that our technique improves over the state of art in terms of accuracy over the MPEG7 dataset.

  2. Refinement in Z and Object-Z foundations and advanced applications

    CERN Document Server

    Derrick, John

    2013-01-01

    Refinement is one of the cornerstones of the formal approach to software engineering, and its use in various domains has led to research on new applications and generalisation. This book brings together this important research in one volume, with the addition of examples drawn from different application areas. It covers four main themes:Data refinement and its application to ZGeneralisations of refinement that change the interface and atomicity of operationsRefinement in Object-ZModelling state and behaviour by combining Object-Z with CSPRefinement in Z and Object-Z: Foundations and Advanced A

  3. Singapore refiners in midst of huge construction campaign

    International Nuclear Information System (INIS)

    Land, R.

    1992-01-01

    This paper reports that Singapore's downstream capacity continues to mushroom. Singapore refiners, upbeat about long term prospects for petroleum products demand in the Asia-Pacific region, and are pressing plans to boost processing capacity. Their plans go beyond capacity expansions. They are proceeding with projects to upgrade refineries to emphasize production of higher value products and to further integrate refining capabilities wit the region's petrochemical industry. Planned expansion and upgrading projects at Singapore refineries call for outlays of more than $1 billion to boost total capacity to about 1.1 million b/d in 1993 and 1.27 million b/d by 1995. That would be the highest level since the mid-1980s, when refiners such as Shell Singapore cut capacity amid an oil glut. Singapore refineries currently are running at effective full capacity of 1.04 million b/d. Meanwhile, Singapore refiners are aggressively courting customers in the Indochina subcontinent, where long isolated centrally planned economies are turning gradually to free markets

  4. Directions in refining and upgrading of heavy oil and bitumen

    International Nuclear Information System (INIS)

    Dawson, B.; Parker, R. J.; Flint, L.

    1997-01-01

    The expansion of heavy oil transportation, marketing and refining facilities over the past two decades have been reviewed to show the strides that several Canadian refiners have taken to build up the facilities required to process synthetic crude oil (SCO). Key points made at a conference, convened by the National Centre for Upgrading Technology (NCUT), held in Edmonton during September 1997 to discuss current and future directions in the refining and marketing of heavy oil, bitumen and SCO, were summarized. Among the key points mentioned were: (1) the high entry barriers faced by centralized upgraders, (2) the advantages of integrating SCO or heavy oil production with downstream refining, (3) the stiff competition from Venezuela and Mexico that both SCO and heavy oil will face in the U.S. PADD II market, (4) the differences between Canadian refiners who have profited from hydrocracking and are better able to handle coker-based SCO, and American refiners who rely chiefly on catalytic cracking and are less able to process the highly aromatic SCO, and (5) the disproportionate cost in the upgrading process represented by the conversion of asphaltenes. Challenges and opportunities for key stakeholders, i.e. producers, refiners, marketers and technology licensors also received much attention at the Edmonton conference

  5. 30 CFR 208.4 - Royalty oil sales to eligible refiners.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Royalty oil sales to eligible refiners. 208.4... MANAGEMENT SALE OF FEDERAL ROYALTY OIL General Provisions § 208.4 Royalty oil sales to eligible refiners. (a... and defense. The Secretary will review these items and will determine whether eligible refiners have...

  6. Multiple Intelligence and Digital Learning Awareness of Prospective B.Ed Teachers

    Science.gov (United States)

    Gracious, F. L. Antony; Shyla, F. L. Jasmine Anne

    2012-01-01

    The present study Multiple Intelligence and Digital Learning Awareness of prospective B.Ed teachers was probed to find the relationship between Multiple Intelligence and Digital Learning Awareness of Prospective B.Ed Teachers. Data for the study were collected using self made Multiple Intelligence Inventory and Digital Learning Awareness Scale.…

  7. Mechanical Ventilation and ARDS in the ED: A Multicenter, Observational, Prospective, Cross-sectional Study.

    Science.gov (United States)

    Fuller, Brian M; Mohr, Nicholas M; Miller, Christopher N; Deitchman, Andrew R; Levine, Brian J; Castagno, Nicole; Hassebroek, Elizabeth C; Dhedhi, Adam; Scott-Wittenborn, Nicholas; Grace, Edward; Lehew, Courtney; Kollef, Marin H

    2015-08-01

    There are few data regarding mechanical ventilation and ARDS in the ED. This could be a vital arena for prevention and treatment. This study was a multicenter, observational, prospective, cohort study aimed at analyzing ventilation practices in the ED. The primary outcome was the incidence of ARDS after admission. Multivariable logistic regression was used to determine the predictors of ARDS. We analyzed 219 patients receiving mechanical ventilation to assess ED ventilation practices. Median tidal volume was 7.6 mL/kg predicted body weight (PBW) (interquartile range, 6.9-8.9), with a range of 4.3 to 12.2 mL/kg PBW. Lung-protective ventilation was used in 122 patients (55.7%). The incidence of ARDS after admission from the ED was 14.7%, with a mean onset of 2.3 days. Progression to ARDS was associated with higher illness severity and intubation in the prehospital environment or transferring facility. Of the 15 patients with ARDS in the ED (6.8%), lung-protective ventilation was used in seven (46.7%). Patients who progressed to ARDS experienced greater duration in organ failure and ICU length of stay and higher mortality. Lung-protective ventilation is infrequent in patients receiving mechanical ventilation in the ED, regardless of ARDS status. Progression to ARDS is common after admission, occurs early, and worsens outcome. Patient- and treatment-related factors present in the ED are associated with ARDS. Given the limited treatment options for ARDS, and the early onset after admission from the ED, measures to prevent onset and to mitigate severity should be instituted in the ED. ClinicalTrials.gov; No.: NCT01628523; URL: www.clinicaltrials.gov.

  8. Development of an efficient grain refiner for Al-7Si alloy

    Energy Technology Data Exchange (ETDEWEB)

    Kori, S.A.; Murty, B.S.; Chakraborty, M. [Indian Inst. of Technol., Kharagpur (India). Dept. of Metall. and Mater. Eng.

    2000-03-15

    The response of Al-7Si alloy towards grain refinement by Al-Ti-B master alloys (with different Ti-B ratios) at different addition levels has been studied in detail. The results indicate that high B-containing master alloys are powerful grain refiners when compared to conventional grain refiners like Al-5Ti-lB master alloys. In the present study, indigenously developed master alloys have been used for the grain refinement of alloys Al-7Si and LM-25. Significant improvements in mechanical properties have been obtained with a combination of grain refiner and Sr as modifier. (orig.)

  9. Local grid refinement for free-surface flow simulations

    NARCIS (Netherlands)

    van der Plas, Peter

    2017-01-01

    The principal goal of the current study is to explore and investigate the potential of local grid refinement for increasing the numerical efficiency of free-surface flow simulations in a practical context. In this thesis we propose a method for local grid refinement in the free-surface flow model

  10. Oil refining in South Asia and Australasia

    International Nuclear Information System (INIS)

    Yamaguchi, N.D.

    2000-01-01

    An overview of the oil markets of Southeast Asia and Australasia is presented focussing on oil refining. Key statistics of both areas are tabulated, and figures providing information on GDP/capita, crude production, comparison of demand barrels, and product demand are provided. Crude oil production and supply, oil product demand, and the refining industries are examined with details given of evolution of capacity and cracking to distillation ratios

  11. Investment in Exploration-Production and Refining - 2016

    International Nuclear Information System (INIS)

    Maisonnier, Guy; Hureau, Geoffroy; Serbutoviez, Sylvain; Silva, Constancio

    2017-03-01

    IFPEN analyses in this study the 2016 evolution of global investment in the field of exploration-production and refining: - Trends in oil and gas prices; - Investment in exploration/production: in sharp decline for the second consecutive year - the first time this has happened since 1986; - The global drilling market; - Geophysical: global activity and markets; - Offshore construction: market and business; - A significant reduction in refining projects (atmospheric distillation and conversion)

  12. Problems persist for French refining sector

    International Nuclear Information System (INIS)

    Beck, R.J.

    1992-01-01

    This paper reports that France's refiners face a continuing shortfall of middle distillate capacity and a persistent surplus of heavy fuel oil. That's the main conclusion of the official Hydrocarbon Directorate's report on how France's refining sector performed in 1991. Imports up---The directorate noted that although net production of refined products in French refineries rose to 1.534 million b/d in 1991 from 1.48 million b/d in 1990, products imports jumped 9.7% to 602,000 b/d in the period. The glut of heavy fuel oil eased to some extent last year because French nuclear power capacity, heavily dependent on ample water supplies, was crimped by drought. That spawned fuel switching. The most note worthy increase in imports was for motor diesel, climbing to 176,000 b/d from 148,000 b/d in 1990. Tax credits are spurring French consumption of that fuel. For the first time, consumption of motor diesel in 1991 outstripped that of gasoline at 374,000 b/d and 356,000 b/d respectively

  13. Refining glass structure in two dimensions

    Science.gov (United States)

    Sadjadi, Mahdi; Bhattarai, Bishal; Drabold, D. A.; Thorpe, M. F.; Wilson, Mark

    2017-11-01

    Recently determined atomistic scale structures of near-two dimensional bilayers of vitreous silica (using scanning probe and electron microscopy) allow us to refine the experimentally determined coordinates to incorporate the known local chemistry more precisely. Further refinement is achieved by using classical potentials of varying complexity: one using harmonic potentials and the second employing an electrostatic description incorporating polarization effects. These are benchmarked against density functional calculations. Our main findings are that (a) there is a symmetry plane between the two disordered layers, a nice example of an emergent phenomena, (b) the layers are slightly tilted so that the Si-O-Si angle between the two layers is not 180∘ as originally thought but rather 175 ±2∘ , and (c) while interior areas that are not completely imagined can be reliably reconstructed, surface areas are more problematic. It is shown that small crystallites that appear are just as expected statistically in a continuous random network. This provides a good example of the value that can be added to disordered structures imaged at the atomic level by implementing computer refinement.

  14. Segmental Refinement: A Multigrid Technique for Data Locality

    KAUST Repository

    Adams, Mark F.; Brown, Jed; Knepley, Matt; Samtaney, Ravi

    2016-01-01

    We investigate a domain decomposed multigrid technique, termed segmental refinement, for solving general nonlinear elliptic boundary value problems. We extend the method first proposed in 1994 by analytically and experimentally investigating its complexity. We confirm that communication of traditional parallel multigrid is eliminated on fine grids, with modest amounts of extra work and storage, while maintaining the asymptotic exactness of full multigrid. We observe an accuracy dependence on the segmental refinement subdomain size, which was not considered in the original analysis. We present a communication complexity analysis that quantifies the communication costs ameliorated by segmental refinement and report performance results with up to 64K cores on a Cray XC30.

  15. Segmental Refinement: A Multigrid Technique for Data Locality

    KAUST Repository

    Adams, Mark F.

    2016-08-04

    We investigate a domain decomposed multigrid technique, termed segmental refinement, for solving general nonlinear elliptic boundary value problems. We extend the method first proposed in 1994 by analytically and experimentally investigating its complexity. We confirm that communication of traditional parallel multigrid is eliminated on fine grids, with modest amounts of extra work and storage, while maintaining the asymptotic exactness of full multigrid. We observe an accuracy dependence on the segmental refinement subdomain size, which was not considered in the original analysis. We present a communication complexity analysis that quantifies the communication costs ameliorated by segmental refinement and report performance results with up to 64K cores on a Cray XC30.

  16. AdvancED Flex 4

    CERN Document Server

    Tiwari, Shashank; Schulze, Charlie

    2010-01-01

    AdvancED Flex 4 makes advanced Flex 4 concepts and techniques easy. Ajax, RIA, Web 2.0, mashups, mobile applications, the most sophisticated web tools, and the coolest interactive web applications are all covered with practical, visually oriented recipes. * Completely updated for the new tools in Flex 4* Demonstrates how to use Flex 4 to create robust and scalable enterprise-grade Rich Internet Applications.* Teaches you to build high-performance web applications with interactivity that really engages your users.* What you'll learn Practiced beginners and intermediate users of Flex, especially

  17. Solving the Sophistication-Population Paradox of Game Refinement Theory

    OpenAIRE

    Xiong , Shuo; Tiwary , Parth ,; Iida , Hiroyuki

    2016-01-01

    Part 4: Short Papers; International audience; A mathematical model of game refinement was proposed based on uncertainty of game outcome. This model has been shown to be useful in measuring the entertainment element in the domains such as boardgames and sport games. However, game refinement theory has not been able to explain the correlation between the popularity of a game and the game refinement value. This paper introduces another aspect in the study of game entertainment, the concept of “a...

  18. A refined approach: Saudi Arabia moves beyond crude

    International Nuclear Information System (INIS)

    Krane, Jim

    2015-01-01

    Saudi Arabia's role in global energy markets is changing. The kingdom is reshaping itself as a supplier of refined petroleum products while moving beyond its long-held role as a simple exporter of crude oil. This change is commensurate with the typical development trajectory of a state progressing to a more advanced stage of global economic integration. Gains from increased refining include reducing fuel imports and capturing margins now bequeathed to competitors. Refining also allows the kingdom to export its heavy crude oil to a wider array of customers, beyond select importers configured to handle heavy crudes. However, the move also presents strategic complications. The world's 'swing supplier' of oil may grow less willing or able to adjust supply to suit market demands. In the process, Saudi Arabia may have to update the old “oil for security” relationship that links it with Washington, augmenting it with a more diverse set of economic and investment ties with individual companies and countries, including China. -- Highlights: •Saudi Arabia is diverting crude oil into an expanding refining sector. •In doing so, the kingdom is moving beyond its role as global “swing supplier” of crude oil. •The kingdom will benefit from increased refining, including enhanced demand for heavy crude. •Strategic complications may force it to seek security partners beyond Washington

  19. Bayesian ensemble refinement by replica simulations and reweighting

    Science.gov (United States)

    Hummer, Gerhard; Köfinger, Jürgen

    2015-12-01

    We describe different Bayesian ensemble refinement methods, examine their interrelation, and discuss their practical application. With ensemble refinement, the properties of dynamic and partially disordered (bio)molecular structures can be characterized by integrating a wide range of experimental data, including measurements of ensemble-averaged observables. We start from a Bayesian formulation in which the posterior is a functional that ranks different configuration space distributions. By maximizing this posterior, we derive an optimal Bayesian ensemble distribution. For discrete configurations, this optimal distribution is identical to that obtained by the maximum entropy "ensemble refinement of SAXS" (EROS) formulation. Bayesian replica ensemble refinement enhances the sampling of relevant configurations by imposing restraints on averages of observables in coupled replica molecular dynamics simulations. We show that the strength of the restraints should scale linearly with the number of replicas to ensure convergence to the optimal Bayesian result in the limit of infinitely many replicas. In the "Bayesian inference of ensembles" method, we combine the replica and EROS approaches to accelerate the convergence. An adaptive algorithm can be used to sample directly from the optimal ensemble, without replicas. We discuss the incorporation of single-molecule measurements and dynamic observables such as relaxation parameters. The theoretical analysis of different Bayesian ensemble refinement approaches provides a basis for practical applications and a starting point for further investigations.

  20. The future of refining industry is in Asia

    International Nuclear Information System (INIS)

    Dupin, L.

    2010-01-01

    The decision of Total Group to close down the refining activity of its Flandres' site at Dunkerque (France) is a testimony of the deep restructuring that is affecting this sector. The migration of the refining activity towards Middle-East and Asia has started several years ago. The World capacities are increasing: in 2009 4.36 billion tons of petroleum products were refined in the world, representing a 1.9% rise with respect to 2008. 661 refineries exist in the world, among which 6 were inaugurated in 2009, 115 are located in Europe and 12 in France. The bad health of the European refining activity is beneficial to Middle and Asia where investments in new production capacities follow on from one another. From now to 2030, these areas will benefit from 70% of the worldwide investments compared to 11% only for Europe and North America. The decline of the European refining industry is directly linked to decay of the automotive fuel consumption and to the increase of the diesel fuel share with respect to gasoline. On the other hand, Asia, and in particular China and India, follow the exactly opposite trend thanks to their population and economic growths. Therefore, European oil companies try to invest in Asia and are looking for new production capacities in China and India. (J.S.)

  1. EdD Students’ Self-Efficacy and Interest in Conducting Research

    Directory of Open Access Journals (Sweden)

    Monica R Kerrigan

    2016-03-01

    Full Text Available Today’s educational practitioners are expected to know how to gather, analyze, and report on data for accountability purposes and to use that information to improve student outcomes. However, there is little understanding of how to support practitioners’ learning of and engagement with research and few studies on the research experiences of students enrolled in Doctorate of Education (EdD programs. The success of students enrolled in Doctor of Philosophy (PhD programs in conducting research has been found to be related to students’ self-efficacy and interest, but these concepts have not been explored with EdD students who are more likely to engage in applied research in their workplace than to create a research-focused career. This study sought to understand the self-efficacy and interest that EdD students enrolled in an Educational Leadership program have in research skills and tasks in order to improve research course offerings. Our findings with EdD students are consistent with existing research on PhD students regarding research self-efficacy but we did not observe significant changes in students’ interest over time. We suggest avenues for future study in light of current accountability reporting requirements for practitioners.

  2. Analysis of microtraces in invasive traumas using SEM/EDS.

    Science.gov (United States)

    Vermeij, E J; Zoon, P D; Chang, S B C G; Keereweer, I; Pieterman, R; Gerretsen, R R R

    2012-01-10

    Scanning electron microscopy in combination with energy-dispersive X-ray spectrometry (SEM/EDS) is a proven forensic tool and has been used to analyze several kinds of trace evidence. A forensic application of SEM/EDS is the examination of morphological characteristics of tool marks that tools and instruments leave on bone. The microtraces that are left behind by these tools and instruments on the bone are, however, often ignored or not noticed at all. In this paper we will describe the use of SEM/EDS for the analysis of microtraces in invasive sharp-force, blunt-force and bone-hacking traumas in bone. This research is part of a larger multi-disciplinary approach in which pathologists, forensic anthropologists, toolmark and microtrace experts work together to link observed injuries to a suspected weapon or, in case of an unknown weapon, to indicate a group of objects that could have been used as a weapon. Although there are a few difficulties one have to consider, the method itself is rather simple and straightforward to apply. A sample of dry and clean bone is placed into the SEM sample chamber and brightness and contrast are set such that bone appears grey, metal appears white and organic material appears black. The sample is then searched manually to find relevant features. Once features are found their elemental composition is measured by an energy dispersive X-ray spectrometer (EDS). This method is illustrated using several cases. It is shown that SEM/EDS analysis of microtraces in bone is a valuable tool to get clues about an unknown weapon and can associate a specific weapon with injuries on the basis of appearance and elemental composition. In particular the separate results from the various disciplines are complementary and may be combined to reach a conclusion with a stronger probative value. This is not only useful in the courtroom but above all in criminal investigations when one have to know for what weapon or object to look for. Copyright © 2011

  3. Balanced nuclear and cytoplasmic activities of EDS1 are required for a complete plant innate immune response.

    Directory of Open Access Journals (Sweden)

    Ana V García

    2010-07-01

    Full Text Available An important layer of plant innate immunity to host-adapted pathogens is conferred by intracellular nucleotide-binding/oligomerization domain-leucine rich repeat (NB-LRR receptors recognizing specific microbial effectors. Signaling from activated receptors of the TIR (Toll/Interleukin-1 Receptor-NB-LRR class converges on the nucleo-cytoplasmic immune regulator EDS1 (Enhanced Disease Susceptibility1. In this report we show that a receptor-stimulated increase in accumulation of nuclear EDS1 precedes or coincides with the EDS1-dependent induction and repression of defense-related genes. EDS1 is capable of nuclear transport receptor-mediated shuttling between the cytoplasm and nucleus. By enhancing EDS1 export from inside nuclei (through attachment of an additional nuclear export sequence (NES or conditionally releasing EDS1 to the nucleus (by fusion to a glucocorticoid receptor (GR in transgenic Arabidopsis we establish that the EDS1 nuclear pool is essential for resistance to biotrophic and hemi-biotrophic pathogens and for transcriptional reprogramming. Evidence points to post-transcriptional processes regulating receptor-triggered accumulation of EDS1 in nuclei. Changes in nuclear EDS1 levels become equilibrated with the cytoplasmic EDS1 pool and cytoplasmic EDS1 is needed for complete resistance and restriction of host cell death at infection sites. We propose that coordinated nuclear and cytoplasmic activities of EDS1 enable the plant to mount an appropriately balanced immune response to pathogen attack.

  4. Refining - Panorama 2008; Raffinage - Panorama 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    Investment rallied in 2007, and many distillation and conversion projects likely to reach the industrial stage were announced. With economic growth sustained in 2006 and still pronounced in 2007, oil demand remained strong - especially in emerging countries - and refining margins stayed high. Despite these favorable business conditions, tensions persisted in the refining sector, which has fallen far behind in terms of investing in refinery capacity. It will take renewed efforts over a long period to catch up. Looking at recent events that have affected the economy in many countries (e.g. the sub-prime crisis), prudence remains advisable.

  5. Self-Esteem and Emotional Intelligence among B.Ed Trainees of Tsunami Affected Coastal Belt

    Science.gov (United States)

    Babu M, Sameer

    2008-01-01

    Through this study the author investigates the relationship between self-esteem and emotional intelligence among B.Ed trainees of Tsunami affected coastal belt of Alappey district of Kerala, India. Stream of study, marital status and age based comparisons were made among the B.Ed trainees. 92 B.Ed trainees were the participants in the study. It…

  6. The Charfuel coal refining process

    International Nuclear Information System (INIS)

    Meyer, L.G.

    1991-01-01

    The patented Charfuel coal refining process employs fluidized hydrocracking to produce char and liquid products from virtually all types of volatile-containing coals, including low rank coal and lignite. It is not gasification or liquefaction which require the addition of expensive oxygen or hydrogen or the use of extreme heat or pressure. It is not the German pyrolysis process that merely 'cooks' the coal, producing coke and tar-like liquids. Rather, the Charfuel coal refining process involves thermal hydrocracking which results in the rearrangement of hydrogen within the coal molecule to produce a slate of co-products. In the Charfuel process, pulverized coal is rapidly heated in a reducing atmosphere in the presence of internally generated process hydrogen. This hydrogen rearrangement allows refinement of various ranks of coals to produce a pipeline transportable, slurry-type, environmentally clean boiler fuel and a slate of value-added traditional fuel and chemical feedstock co-products. Using coal and oxygen as the only feedstocks, the Charfuel hydrocracking technology economically removes much of the fuel nitrogen, sulfur, and potential air toxics (such as chlorine, mercury, beryllium, etc.) from the coal, resulting in a high heating value, clean burning fuel which can increase power plant efficiency while reducing operating costs. The paper describes the process, its thermal efficiency, its use in power plants, its pipeline transport, co-products, environmental and energy benefits, and economics

  7. Asian oil refining. Demand growth and deregulation - an uncertain future

    International Nuclear Information System (INIS)

    Sameer Nawaz.

    1996-01-01

    The objective of the report is to identify the most important features of the oil refining industry in Asia. Major developments in consumption patterns changes in regional importance of countries are discussed, highlighting potential future developments. The first chapter introduces the various refining processes and presents a simple model for the analysis of complex refineries. Chapter 2 examines the development of the Asian refining industry against a background of economic growth and analyses trends in consumption of all products in Asian countries. In Chapter 3, the key issues concerning the refining industry are examined, among them the forces driving consumption, including the importance of economic development, and electricity and transport demand. The importance of product imports and international trade is discussed, and the extent of government involvement and the effects of changing retail and market prices are analysed. Chapter 4 looks at the strategies that oil and gas companies are following in the Asian refining industry. Particular significance is attached to the vertical integration of the oil majors, Japanese and Middle Eastern oil companies. A brief overview of the importance of the petrochemical industry is presented. The countries of Asia that are involved in the refining industry are profiled in Chapter 5. The future trend in oil consumption is examined in Chapter 6. There follows a brief discussion of the plans to expand crude refining capacity in the various countries and a forecast of the state of overcapacity which will result. In the final chapter, brief profiles of some of the most important companies in the Asian refining industry are presented, discussing their major activities and future plans. (Author)

  8. Diseños de plantación y formación de árboles frutales (7ª ed.)

    OpenAIRE

    Cambra Ruiz de Velasco, Mariano; Cambra Ruiz de Velasco, Rafael

    1983-01-01

    158 Pags., 45 Figs., Tabls. ** Historia de las ediciones anteriores y posteriores: 1ª ed., 1962; 2ª ed., 1964; 3ª ed., 1966; 4ª ed., 1967; 5ª ed., 1971; 6ª ed., 1974; 8ª ed., 1991. ** Última edición, en 2004, por CSIC: Diseños de plantación y formación de árboles frutales / M. Cambra Ruiz de Velasco, R. Cambra Ruiz de Velasco.-- Madrid : Consejo Superior de Investigaciones Científicas, 2004.-- [149] p. ; 24 cm.-- (Biblioteca de ciencias, 16).

  9. Vývojové prostředí NetBeans

    OpenAIRE

    Pitka, Lukáš

    2007-01-01

    Tato bakalářská práce představuje základní aspekty vývojového prostředí NetBeans IDE. NetBeans IDE je prostředí pro programovací jazyk Java. Práce je napsána jako příručka pro uživatele začínající s NetBeans IDE, přičemž se předpokládá se určitá znalost programovacího jazyka Java. Hlavním přínosem práce je usnadnění a zefektivnění práce s NetBeans IDE. První kapitola práce je spíše teoretická, zabývá se obecně pojmem vývojové prostředí. V dalších částech jsou rozebírány aspekty NetBeans IDE, ...

  10. Perceptions of empowerment among ED nurses.

    Science.gov (United States)

    DeVivo, Diane; Quinn Griffin, Mary T; Donahue, Moreen; Fitzpatrick, Joyce J

    2013-11-01

    Nurses' perceptions of empowerment have been linked to a number of variables in the hospital workplace, including job satisfaction, autonomy, and work effectiveness. Yet there have been no previous studies of perceptions of empowerment specifically among emergency department (ED) nurses. Registered nurses (RNs) employed in the EDs of 6 hospitals in a major health care system in the eastern United States were surveyed regarding their perceptions of empowerment. Of the 240 RNs eligible to participate, there were 167 usable surveys. There was a moderate level of empowerment among the RNs who participated, consistent with the level of empowerment reported in several other studies of staff nurses and nurses in other positions. The moderate level of empowerment in this sample may be attributed to the many opportunities for RN involvement in the hospitals within this health care system. Nurse leaders can initiate programs focused on enhancing RN perceptions of empowerment. In addition, there is a need for further research among RNs with different specialty preparation. Copyright © 2013. Published by Mosby, Inc.

  11. Grain refinement of permanent mold cast copper base alloys. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sadayappan, M.; Thomson, J. P.; Elboujdaini, M.; Gu, G. Ping; Sahoo, M.

    2004-04-29

    Grain refinement behavior of copper alloys cast in permanent molds was investigated. This is one of the least studied subjects in copper alloy castings. Grain refinement is not widely practiced for leaded copper alloys cast in sand molds. Aluminum bronzes and high strength yellow brasses, cast in sand and permanent molds, were usually fine grained due to the presence of more than 2% iron. Grain refinement of the most common permanent mold casting alloys, leaded yellow brass and its lead-free replacement EnviroBrass III, is not universally accepted due to the perceived problem of hard spots in finished castings and for the same reason these alloys contain very low amounts of iron. The yellow brasses and Cu-Si alloys are gaining popularity in North America due to their low lead content and amenability for permanent mold casting. These alloys are prone to hot tearing in permanent mold casting. Grain refinement is one of the solutions for reducing this problem. However, to use this technique it is necessary to understand the mechanism of grain refinement and other issues involved in the process. The following issues were studied during this three year project funded by the US Department of Energy and the copper casting industry: (1) Effect of alloying additions on the grain size of Cu-Zn alloys and their interaction with grain refiners; (2) Effect of two grain refining elements, boron and zirconium, on the grain size of four copper alloys, yellow brass, EnviroBrass II, silicon brass and silicon bronze and the duration of their effect (fading); (3) Prediction of grain refinement using cooling curve analysis and use of this method as an on-line quality control tool; (4) Hard spot formation in yellow brass and EnviroBrass due to grain refinement; (5) Corrosion resistance of the grain refined alloys; (6) Transfer the technology to permanent mold casting foundries; It was found that alloying elements such as tin and zinc do not change the grain size of Cu-Zn alloys

  12. The present state of refining in France

    International Nuclear Information System (INIS)

    1996-01-01

    The european refining industry suffers from a production over-capacity and closures are inevitable; the situation is even worse in France due to the imbalance between gas oil and gasoline prices and the weak margin for distributors. The French refining industry is however an important and essential link for its strategic fuel and petroleum product supply, and represent 17000 jobs. Several measures are introduced by the French Industry department towards restructuring, capacity reduction and fuel price harmonization

  13. A new process of electron beam refining of niobium

    International Nuclear Information System (INIS)

    Pinatti, D.G.

    1981-01-01

    A review of thermodynamic equilibrium, the kinetic theory and experimental results of the metal-gas interaction in refractory metals is presented. N 2 , H 2 and CO absorption and desorption take place by a reversible process while O 2 takes place by a irreversible process with atom absorption and metal oxide desorption. A new technology of electron beam refining of Niobium is proposed based on four points: 1) preparation of the aluminothermic reduced electrode, 2) zone refining in the first melt, 3) kinetic theory of refining in the following melts and 4) design of a compact furnace. Experimental results in a pilot plant of 300 KW have shown complete agreement with the proposed technology yielding a productivity 2.4 times larger than the value predicted by the conventional technology of electron beam refining of Niobium. (Author) [pt

  14. European refining: evolution or revolution?

    International Nuclear Information System (INIS)

    Cuthbert, N.

    1999-01-01

    A recent detailed analysis of the refining business in Europe (by Purvin and Gurtz) was used to highlight some key issues facing the industry. The article was written under five sub-sections: (i) economic environment (assessment of the economic prospects for Europe), (ii) energy efficiency and global warming (lists the four points of the EU car makers' voluntary agreement), (iii) fuel quality and refinery investment (iv) refinery capacity and utilisation and (v) industry structure and development. Diagrams show GDP per capita for East and West, European road fuel demand to 2015 and European net trade and European refinery ownership by crude capacity. It was concluded that the future of refining in Europe is 'exciting and challenging' and there are likely to be more large joint venture refineries. (UK)

  15. ED utilization trends in sports-related traumatic brain injury.

    Science.gov (United States)

    Hanson, Holly R; Pomerantz, Wendy J; Gittelman, Mike

    2013-10-01

    Emergency department (ED) visits for sports-related traumatic brain injuries (TBIs) have risen. This study evaluated how the number and severity of admissions have changed as ED visits for sports-related TBIs have increased. A retrospective study of children aged 0 to 19 years at a level 1 trauma center was performed. Patients from 2002 to 2011 with a primary or secondary diagnosis of TBI were identified from the hospital's inpatient and outpatient trauma registries. Frequencies were used to characterize the population, χ(2) analysis was performed to determine differences between groups, and regression analysis looked at relationship between year and injury severity score or length of stay. Sport was responsible for injury in 3878 (15.4%) cases during the study period; 3506 (90.4%) were discharged from the hospital, and 372 (9.6%) were admitted. Seventy-three percent were male patients and 78% Caucasian; mean age was 13 ± 3.5 years. ED visits for sports-related TBIs increased 92% over the study period, yet there was no significant change (χ(2) = 9.8, df = 9, P = .37) in the percentage of children admitted. Mean injury severity score for those admitted decreased from 7.8 to 4.8 (β = -0.46; P = .006); length of stay trended downward (β = -0.05; P = .05). The percentage of children being admitted from the ED with sports-related TBI has not changed over the past 10 years. The severity of admitted sports-related TBI is decreasing. Additional research is needed to correlate these trends with other TBI mechanisms.

  16. Bio-EdIP: An automatic approach for in vitro cell confluence images quantification.

    Science.gov (United States)

    Cardona, Andrés; Ariza-Jiménez, Leandro; Uribe, Diego; Arroyave, Johanna C; Galeano, July; Cortés-Mancera, Fabian M

    2017-07-01

    Cell imaging is a widely-employed technique to analyze multiple biological processes. Therefore, simple, accurate and quantitative tools are needed to understand cellular events. For this purpose, Bio-EdIP was developed as a user-friendly tool to quantify confluence levels using cell culture images. The proposed algorithm combines a pre-processing step with subsequent stages that involve local processing techniques and a morphological reconstruction-based segmentation algorithm. Segmentation performance was assessed in three constructed image sets, comparing F-measure scores and AUC values (ROC analysis) for Bio-EdIP, its previous version and TScratch. Furthermore, segmentation results were compared with published algorithms using eight public benchmarks. Bio-EdIP automatically segmented cell-free regions from images of in vitro cell culture. Based on mean F-measure scores and ROC analysis, Bio-EdIP conserved a high performance regardless of image characteristics of the constructed dataset, when compared with its previous version and TScratch. Although acquisition quality of the public dataset affected Bio-EdIP segmentation, performance was better in two out of eight public sets. Bio-EdIP is a user-friendly interface, which is useful for the automatic analysis of confluence levels and cell growth processes using in vitro cell culture images. Here, we also presented new manually annotated data for algorithms evaluation. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Torrefied Biomass Pellets—Comparing Grindability in Different Laboratory Mills

    Directory of Open Access Journals (Sweden)

    Jan Hari Arti Khalsa

    2016-10-01

    Full Text Available The firing and co-firing of biomass in pulverized coal fired power plants around the world is expected to increase in the coming years. Torrefaction may prove to be a suitable way of upgrading biomass for such an application. For transport and storage purposes, the torrefied biomass will tend to be in pellet form. Whilst standard methods for the assessment of the milling characteristics of coal exist, this is not the case for torrefied materials—whether in pellet form or not. The grindability of the fuel directly impacts the overall efficiency of the combustion process and as such it is an important parameter. In the present study, the grindability of different torrefied biomass pellets was tested in three different laboratory mill types; cutting mill (CM, hammer mill (HM and impact mill (IM. The specific grinding energy (SGE required for a defined mass throughput of pellets in each mill was measured and results were compared to other pellet characterization methods (e.g., durability, and hardness as well as the modified Hardgrove Index. Seven different torrefied biomass pellets including willow, pine, beech, poplar, spruce, forest residue and straw were used as feedstock. On average, the particle-size distribution width (across all feedstock was narrowest for the IM (0.41 mm, followed by the HM (0.51 mm and widest for the CM (0.62 mm. Regarding the SGE, the IM consumed on average 8.23 Wh/kg while CM and HM consumed 5.15 and 5.24 Wh/kg, respectively. From the three mills compared in this study, the IM seems better fit for being used in a standardized method that could be developed in the future, e.g., as an ISO standard.

  18. Treatment motivation of men with ED: what motivates men with ED to seek professional help and how can women support their partners?

    Science.gov (United States)

    Gerster, S; Günzler, C; Roesler, C; Leiber, C; Berner, M M

    2013-01-01

    Although ED can impair sexual satisfaction as well as the quality of partnership and life, men affected often avoid seeking treatment. There is growing evidence that women have an influence on their partner's help-seeking behavior. This qualitative study examined men with ED and their female partners in order to detect motivational factors for men to seek treatment and motivational actions of the women to support their partners. Twelve couples took part in a semi-structured telephone interview, which was performed separately in men and women. Analysis was on the basis of the Grounded Theory. The identified motivational factors could be divided into extrinsic (for example, media, female partner) and intrinsic (for example, desire to clarify the cause of the ED, hope for improvement) factors. Women can support their partners in treatment-seeking through various motivational actions such as talking with each other, showing interest and dealing actively with the problem, appealing to the male self-esteem, supporting the doctor's visit, forcing the treatment, active cooperation and participation in the treatment or initiating sexual intercourse. On the basis of these findings, recommendations for women were developed to support their partners and increase the probability of help-seeking behavior.

  19. Diseños de plantación y formación de árboles frutales (8ª ed.)

    OpenAIRE

    Cambra Ruiz de Velasco, Mariano; Cambra Ruiz de Velasco, Rafael

    1991-01-01

    164 Pags., con 45 Figs. y 9 Tabls. ** Historia de las ediciones anteriores: 1ª ed., 1962; 2ª ed., 1964; 3ª ed., 1966; 4ª ed., 1967; 5ª ed., 1971 (Incorpora Sistemas de formación de apéndice); 6ª ed., 1974; 7ª ed., 1983. ** Última edición, en 2004, por CSIC: Diseños de plantación y formación de árboles frutales / M. Cambra Ruiz de Velasco, R. Cambra Ruiz de Velasco.-- Madrid : Consejo Superior de Investigaciones Científicas, 2004.-- [149] p. ; 24 cm.-- (Biblioteca de ciencia...

  20. Multilevel local refinement and multigrid methods for 3-D turbulent flow

    Energy Technology Data Exchange (ETDEWEB)

    Liao, C.; Liu, C. [UCD, Denver, CO (United States); Sung, C.H.; Huang, T.T. [David Taylor Model Basin, Bethesda, MD (United States)

    1996-12-31

    A numerical approach based on multigrid, multilevel local refinement, and preconditioning methods for solving incompressible Reynolds-averaged Navier-Stokes equations is presented. 3-D turbulent flow around an underwater vehicle is computed. 3 multigrid levels and 2 local refinement grid levels are used. The global grid is 24 x 8 x 12. The first patch is 40 x 16 x 20 and the second patch is 72 x 32 x 36. 4th order artificial dissipation are used for numerical stability. The conservative artificial compressibility method are used for further improvement of convergence. To improve the accuracy of coarse/fine grid interface of local refinement, flux interpolation method for refined grid boundary is used. The numerical results are in good agreement with experimental data. The local refinement can improve the prediction accuracy significantly. The flux interpolation method for local refinement can keep conservation for a composite grid, therefore further modify the prediction accuracy.

  1. Uranium refining process using ion exchange membrane

    International Nuclear Information System (INIS)

    Yamaguchi, Akira

    1977-01-01

    As for the method of refining uranium ore being carried out in Europe and America at present, uranium ore is roughly refined at the mine sites to yellow cake, then this is transported to refineries and refined by dry method. This method has the following faults, namely the number of processes is large, it requires expensive corrosion-resistant materials because of high temperature treatment, and the impurities in uranium tend to increase. On the other hand, in case of EXCER method, treatment is carried out at low temperature, and high purity uranium can be obtained, but the efficiency of electrolytic reduction process is extremely low, and economically infeasible. In the wet refining method called PNC process, uranium tetrafluoride is produced from uranium ore without making yellow cake, therefore the process is rationalized largely, and highly economical. The electrolytic reduction process in this method was developed by Asahi Chemical Industry Co., Ltd. by constructing the pilot plant in Ningyotoge Mine. The ion exchange membrane, the electrodes, and the problems concerning the process and the engineering for commercial plants were investigated. The electrolytic reduction process, the pilot plant, the development of the elements of electrolytic cells, the establishment of analytical process, the measurement of the electrolytic characteristics, the demonstration operation, and the life time of the electrolytic diaphragm are reported. (Kako, I.)

  2. Cytoplasmic Streaming - Skylab Student Experiment ED-63

    Science.gov (United States)

    1973-01-01

    This chart describes the Skylab student experiment (ED-63), Cytoplasmic Streaming, proposed by Cheryl A. Peitz of Arapahoe High School, Littleton, Colorado. Experiment ED-63 was to observe the effect of zero-gravity on cytoplasmic streaming in the aquatic plant named Elodea, commonly called water weed or water thyme. The phenomenon of cytoplasmic streaming is not well understood, but it is recognized as the circulation mechanism of the internal materials or cytoplasm of a cell. Cytoplasm is a gelatinous substance that has the ability to change its viscosity and flow, carrying various cell materials with it. The activity can be stimulated by sunlight or heat. In March 1972, NASA and the National Science Teachers Association selected 25 experiment proposals for flight on Skylab. Science advisors from the Marshall Space Flight Center aided and assisted the students in developing the proposals for flight on Skylab.

  3. Cross-sectional analysis of fouled SWRO membranes by STEM-EDS

    KAUST Repository

    Aubry, Cyril

    2014-01-01

    The intact cross-section of two fouled reverse osmosis membranes was characterized using a scanning transmission electron microscope (STEM) equipped with an electron energy dispersive spectroscope (EDS). Focused ion beam (FIB) was used to prepare a thin lamella of each membrane. These lamellas were then attached to a TEM grid for further STEM/EDS analysis. The foulant in sample A was mainly inorganic in nature and predominantly composed of alumino-silicate particles. These particles were surrounded by carbon at high concentrations, indicating the presence of organic materials. Iron was diffusely present in the cake layer and this could have enhanced the fouling process. The cake layer of membrane B was mainly consisted of organic matter (C, O, and N representing 95% of the total elemental composition) and organized in thin parallel layers. Small concentrations of Si, F, Na, Mg, and Cl were detected inside the active layer and support layer of the membrane. Due to the high sensitivity of the cake layer of membrane A to the electron beam, STEM/EDS line analyses might have been performed on large areas. On the other hand, the cake layer of sample B was resistant to the electron beam and the resolution of STEM/EDS was gradually improved until obtaining a resolution of 25. nm. © 2013 Elsevier B.V.

  4. Adaptive mesh refinement for storm surge

    KAUST Repository

    Mandli, Kyle T.; Dawson, Clint N.

    2014-01-01

    An approach to utilizing adaptive mesh refinement algorithms for storm surge modeling is proposed. Currently numerical models exist that can resolve the details of coastal regions but are often too costly to be run in an ensemble forecasting framework without significant computing resources. The application of adaptive mesh refinement algorithms substantially lowers the computational cost of a storm surge model run while retaining much of the desired coastal resolution. The approach presented is implemented in the GeoClaw framework and compared to ADCIRC for Hurricane Ike along with observed tide gauge data and the computational cost of each model run. © 2014 Elsevier Ltd.

  5. Adaptive mesh refinement for storm surge

    KAUST Repository

    Mandli, Kyle T.

    2014-03-01

    An approach to utilizing adaptive mesh refinement algorithms for storm surge modeling is proposed. Currently numerical models exist that can resolve the details of coastal regions but are often too costly to be run in an ensemble forecasting framework without significant computing resources. The application of adaptive mesh refinement algorithms substantially lowers the computational cost of a storm surge model run while retaining much of the desired coastal resolution. The approach presented is implemented in the GeoClaw framework and compared to ADCIRC for Hurricane Ike along with observed tide gauge data and the computational cost of each model run. © 2014 Elsevier Ltd.

  6. Russian refining - an industry in transition

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, E [CentreInvest, Moscow (Russian Federation)

    1999-02-01

    In the old Soviet Union (now called the CIS), the refining industry is undergoing much modernisation, although the process is far from complete. Eventually, the CIS is expected to have a market-responsive competitive refining business. The expected transformation is discussed according to a five-stage plan. The stages are (i) the change from horizontally integrated entity to vertically integrated global concerns, (ii) the change from over-manned dinosaurs to modern efficient businesses, (iii) the move towards smaller, more advanced market-orientated processes, (iv) improving the transport and storage infrastructures and (v) improving accountability and profitability. The predictions for 2005 onwards are for sustained profitability. (UK)

  7. Using Google Flu Trends data in forecasting influenza-like-illness related ED visits in Omaha, Nebraska.

    Science.gov (United States)

    Araz, Ozgur M; Bentley, Dan; Muelleman, Robert L

    2014-09-01

    Emergency department (ED) visits increase during the influenza seasons. It is essential to identify statistically significant correlates in order to develop an accurate forecasting model for ED visits. Forecasting influenza-like-illness (ILI)-related ED visits can significantly help in developing robust resource management strategies at the EDs. We first performed correlation analyses to understand temporal correlations between several predictors of ILI-related ED visits. We used the data available for Douglas County, the biggest county in Nebraska, for Omaha, the biggest city in the state, and for a major hospital in Omaha. The data set included total and positive influenza test results from the hospital (ie, Antigen rapid (Ag) and Respiratory Syncytial Virus Infection (RSV) tests); an Internet-based influenza surveillance system data, that is, Google Flu Trends, for both Nebraska and Omaha; total ED visits in Douglas County attributable to ILI; and ILI surveillance network data for Douglas County and Nebraska as the predictors and data for the hospital's ILI-related ED visits as the dependent variable. We used Seasonal Autoregressive Integrated Moving Average and Holt Winters methods with3 linear regression models to forecast ILI-related ED visits at the hospital and evaluated model performances by comparing the root means square errors (RMSEs). Because of strong positive correlations with ILI-related ED visits between 2008 and 2012, we validated the use of Google Flu Trends data as a predictor in an ED influenza surveillance tool. Of the 5 forecasting models we have tested, linear regression models performed significantly better when Google Flu Trends data were included as a predictor. Regression models including Google Flu Trends data as a predictor variable have lower RMSE, and the lowest is achieved when all other variables are also included in the model in our forecasting experiments for the first 5 weeks of 2013 (with RMSE = 57.61). Google Flu Trends data

  8. Elementi ed esercizi di geometria analitica e proiettiva

    CERN Document Server

    Francia, Giovanni

    1950-01-01

    La retta : preliminario ; coordinate cartesiane nel piano, equazioni della retta, distanze ed angoli ; cambiamento delle coordinate, coordinate polari ; il cerchio ; le coniche come luoghi geometrici : l'ellisse, l'iperbole, parabola.

  9. Variability-Specific Abstraction Refinement for Family-Based Model Checking

    DEFF Research Database (Denmark)

    Dimovski, Aleksandar; Wasowski, Andrzej

    2017-01-01

    and property, while the number of possible scenarios is very large. In this work, we present an automatic iterative abstraction refinement procedure for family-based model checking. We use Craig interpolation to refine abstract variational models based on the obtained spurious counterexamples (traces...

  10. Zone refining of sintered, microwave-derived YBCO superconductors

    International Nuclear Information System (INIS)

    Warrier, K.G.K.; Varma, H.K.; Mani, T.V.; Damodaran, A.D.; Balachandran, U.

    1993-07-01

    Post-sintering treatments such as zone melting under thermal gradient has been conducted on sintered YBCO tape cast films. YBCO precursor powder was derived through decomposition of a mixture of nitrates of cations in a microwave oven for ∼4 min. The resulting powder was characterized and made into thin sheets by tape casting and then sintered at 945 C for 5 h. The sintered tapes were subjected to repeated zone refining operations at relatively high speeds of ∼30 mm/h. A microstructure having uniformly oriented grains in the a-b plane throughout the bulk of the sample was obtained by three repeated zone refining operations. Details of precursor preparation, microwave processing and its advantages, zone refining conditions, and microstructural features are presented in this paper

  11. Are triage questions sufficient to assign fall risk precautions in the ED?

    Science.gov (United States)

    Southerland, Lauren T; Slattery, Lauren; Rosenthal, Joseph A; Kegelmeyer, Deborah; Kloos, Anne

    2017-02-01

    The American College of Emergency Physicians Geriatric Emergency Department (ED) Guidelines and the Center for Disease Control recommend that older adults be assessed for risk of falls. The standard ED assessment is a verbal query of fall risk factors, which may be inadequate. We hypothesized that the addition of a functional balance test endorsed by the Center for Disease Control Stop Elderly Accidents, Deaths, and Injuries Falls Prevention Guidelines, the 4-Stage Balance Test (4SBT), would improve the detection of patients at risk for falls. Prospective pilot study of a convenience sample of ambulatory adults 65 years and older in the ED. All participants received the standard nursing triage fall risk assessment. After patients were stabilized in their ED room, the 4SBT was administered. The 58 participants had an average age of 74.1 years (range, 65-94), 40.0% were women, and 98% were community dwelling. Five (8.6%) presented to the ED for a fall-related chief complaint. The nursing triage screen identified 39.7% (n=23) as at risk for falls, whereas the 4SBT identified 43% (n=25). Combining triage questions with the 4SBT identified 60.3% (n=35) as at high risk for falls, as compared with 39.7% (n=23) with triage questions alone (Ppatients at high risk by 4SBT and missed by triage questions were inpatients unaware that they were at risk for falls (new diagnoses). Incorporating a quick functional test of balance into the ED assessment for fall risk is feasible and significantly increases the detection of older adults at risk for falls. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. Trends in Hospital Admission and Surgical Procedures Following ED visits for Diverticulitis

    Directory of Open Access Journals (Sweden)

    Margaret B. Greenwood-Ericksen

    2016-06-01

    Full Text Available Introduction: Diverticulitis is a common diagnosis in the emergency department (ED. Outpatient management of diverticulitis is safe in selected patients, yet the rates of admission and surgical procedures following ED visits for diverticulitis are unknown, as are the predictive patient characteristics. Our goal is to describe trends in admission and surgical procedures following ED visits for diverticulitis, and to determine which patient characteristics predict admission. Methods: We performed a cross-sectional descriptive analysis using data on ED visits from 2006-2011 to determine change in admission and surgical patterns over time. The Nationwide Emergency Department Sample database, a nationally representative administrative claims dataset, was used to analyze ED visits for diverticulitis. We included patients with a principal diagnosis of diverticulitis (ICD-9 codes 562.11, 562.13. We analyzed the rate of admission and surgery in all admitted patients and in low-risk patients, defined as age <50 with no comorbidities (Elixhauser. We used hierarchical multivariate logistic regression to identify patient characteristics associated with admission for diverticulitis. Results: From 2006 to 2011 ED visits for diverticulitis increased by 21.3% from 238,248 to 302,612, while the admission rate decreased from 55.7% to 48.5% (-7.2%, 95% CI [–7.78 to -6.62]; p<0.001 for trend. The admission rate among low-risk patients decreased from 35.2% in 2006 to 26.8% in 2011 (-8.4%, 95% CI [–9.6 to –7.2]; p<0.001 for trend. Admission for diverticulitis was independently associated with male gender, comorbid illnesses, higher income and commercial health insurance. The surgical rate decreased from 6.5% in 2006 to 4.7% in 2011 (-1.8%, 95% CI [–2.1 to –1.5]; p<0.001 for trend, and among low-risk patients decreased from 4.0% to 2.2% (- 1.8%, 95% CI [–4.5 to –1.7]; p<0.001 for trend. Conclusion: From 2006 to 2011 ED visits for diverticulitis increased

  13. Oil refining and product marketing developments in southeast Asia

    International Nuclear Information System (INIS)

    Szabo, A.M.

    1992-01-01

    Views on the future are based on supplies from a relatively stable Middle East and continued economic growth in the southeast Asian and Pacific countries. Under these circumstances the oil market for the Association of Southeast Asian Nations (ASEAN) will expand considerably during the decade of the 90's. Pacific country demand, 5.92 MMB/D, in 1990 is likely to grow to 7.06 MMB/D in 2000. Regional production could supply about 40% of this. The Asia-Pacific shortage of refining capacity could lead to high regional refined product prices and health refining profit margins. (author)

  14. Electromyogram refinement using muscle synergy based regulation of uncertain information.

    Science.gov (United States)

    Min, Kyuengbo; Shin, Duk; Lee, Jongho; Kakei, Shinji

    2018-04-27

    Electromyogram signal (EMG) measurement frequently experiences uncertainty attributed to issues caused by technical constraints such as cross talk and maximum voluntary contraction. Due to these problems, individual EMGs exhibit uncertainty in representing their corresponding muscle activations. To regulate this uncertainty, we proposed an EMG refinement, which refines EMGs with regulating the contribution redundancy of the signals from EMGs to approximating torques through EMG-driven torque estimation (EDTE) using the muscular skeletal forward dynamic model. To regulate this redundancy, we must consider the synergistic contribution redundancy of muscles, including "unmeasured" muscles, to approximating torques, which primarily causes redundancy of EDTE. To suppress this redundancy, we used the concept of muscle synergy, which is a key concept of analyzing the neurophysiological regulation of contribution redundancy of muscles to exerting torques. Based on this concept, we designed a muscle-synergy-based EDTE as a framework for EMG refinement, which regulates the abovementioned uncertainty of individual EMGs in consideration of unmeasured muscles. In achieving the proposed EMG refinement, the most considerable point is to suppress a large change such as overestimation attributed to enhancement of the contribution of particular muscles to estimating torques. Therefore it is reasonable to refine EMGs by minimizing the change in EMGs. To evaluate this model, we used a Bland-Altman plot, which quantitatively evaluates the proportional bias of refined signals to EMGs. Through this evaluation, we showed that the proposed EDTE minimizes the bias while approximating torques. Therefore this minimization optimally regulates the uncertainty of EMGs and thereby leads to optimal EMG refinement. Copyright © 2018 Elsevier Ltd. All rights reserved.

  15. Decontamination of transuranic contaminated metals by melt refining

    International Nuclear Information System (INIS)

    Heshmatpour, B.; Copeland, G.L.; Heestand, R.L.

    1983-01-01

    Melt refining of transuranic contaminated metals is a possible decontamination process with the potential advantages of producing metal for reuse and of simplifying chemical analyses. By routinely achieving the 10 nCi/g( about0.1ppm) level by melt refining, scrap metal can be removed from the transuranic waste category. (To demonstrate the effectiveness of this melt refining process, mild steel, stainless steel, nickel, and copper were contaminated with 500 ppm (μg/g) PuO 2 and melted with various fluxes. The solidified slags and metals were analyzed for their plutonium contents, and corresponding partition ratios for plutonium were calculated. Some metals were double refined in order to study the effect of secondary slag treatment. The initial weight of the slags was also varied to investigate the effect of slag weight on the degree of plutonium removal. In general, all four metals could be decontaminated below 1 ppm (μg/g) Pu ( about100 nCi/g) by a single slag treatment. Doubling the slag weight did not improve decontamination significantly; however, double slag treatment using 5 wt.% slag did decontaminate the metals to below 0.1 ppm (μg/g) Pu (10 nCi/g).)

  16. Efficient Round-Trip Time Optimization for Replica-Exchange Enveloping Distribution Sampling (RE-EDS).

    Science.gov (United States)

    Sidler, Dominik; Cristòfol-Clough, Michael; Riniker, Sereina

    2017-06-13

    Replica-exchange enveloping distribution sampling (RE-EDS) allows the efficient estimation of free-energy differences between multiple end-states from a single molecular dynamics (MD) simulation. In EDS, a reference state is sampled, which can be tuned by two types of parameters, i.e., smoothness parameters(s) and energy offsets, such that all end-states are sufficiently sampled. However, the choice of these parameters is not trivial. Replica exchange (RE) or parallel tempering is a widely applied technique to enhance sampling. By combining EDS with the RE technique, the parameter choice problem could be simplified and the challenge shifted toward an optimal distribution of the replicas in the smoothness-parameter space. The choice of a certain replica distribution can alter the sampling efficiency significantly. In this work, global round-trip time optimization (GRTO) algorithms are tested for the use in RE-EDS simulations. In addition, a local round-trip time optimization (LRTO) algorithm is proposed for systems with slowly adapting environments, where a reliable estimate for the round-trip time is challenging to obtain. The optimization algorithms were applied to RE-EDS simulations of a system of nine small-molecule inhibitors of phenylethanolamine N-methyltransferase (PNMT). The energy offsets were determined using our recently proposed parallel energy-offset (PEOE) estimation scheme. While the multistate GRTO algorithm yielded the best replica distribution for the ligands in water, the multistate LRTO algorithm was found to be the method of choice for the ligands in complex with PNMT. With this, the 36 alchemical free-energy differences between the nine ligands were calculated successfully from a single RE-EDS simulation 10 ns in length. Thus, RE-EDS presents an efficient method for the estimation of relative binding free energies.

  17. The use of SEM/EDS method in mineralogical analysis of ordinary chondritic meteorite

    Directory of Open Access Journals (Sweden)

    Breda Mirtič

    2009-12-01

    Full Text Available The aim of this study was to evaluate the potential of scanning electron microscopy coupled with energy dispersiveX-ray spectroscopy (SEM/EDS for determination of mineral phases according to their stoichiometry and assessment of mineral composition of ordinary chondritic meteorite. For the purposes of this study, H3 type ordinary chondritic meteorite Abbott was selected. SEM/EDS allows identification and characterisation of mineralphases, whose size is below the resolution of an optical microscope. Mineral phases in chondrules and interstitial matrix were located in backscattered electron (BSE mode and were assessed from atomic proportions of constituent elements, obtained by the EDS analysis. SEM/EDS analyses of mineral phases showed that Abbott meteorite is characterised by Fe-rich (Fe, Ni-alloy kamacite, Fe-sulphide troilite or pyrrhotite, chromite, Mg-rich olivine, orthopyroxene bronzite or hypersthene, clinopyroxene Al-diopside, acid plagioclase oligoclase, accessory mineral chlorapatite and secondary minerals Fe-hydroxides (goethite or lepidocrocite. Results of semi-quantitative analyses confirmed that most of analysed mineralphases conform well to stoichiometric minerals with minor deviations of oxygen from stoichiometric proportions. Comparison between mineral phases in chondrules and interstitial matrix was also performed, however it showed no significant differences in elemental composition.Differences in chemical composition between minerals in interstitial matrix and chondrules are sometimes too small to be discernedby the SEM/EDS, therefore knowledge of SEM/EDS capabilities is important for correct interpretation of chondrite formation.

  18. 40 CFR 80.555 - What provisions are available to a large refiner that acquires a small refiner or one or more of...

    Science.gov (United States)

    2010-07-01

    ... FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA... May 31, 2010 for a refinery acquired from a motor vehicle diesel fuel small refiner or beyond the... motor vehicle diesel fuel small refiner or beyond the dates specified in § 80.554(a) or (b), as...

  19. The impact of an ED-only full-capacity protocol.

    Science.gov (United States)

    Watase, Taketo; Fu, Rongwei; Foster, Denise; Langley, Denise; Handel, Daniel A

    2012-10-01

    The objective of this study was to assess the impact of an emergency department (ED)-only full-capacity protocol and diversion, controlling for patient volumes and other potential confounding factors. This was a preintervention and postintervention cohort study using data 12 months before and 12 months after the implementation of the protocol. During the implementation period, attending physicians and charge nurses were educated with clear and simple figures on the criteria for the initiation of the new protocol. A multiple logistic regression model was used to compare ambulance diversion between the 2 periods. The proportion of days when the ED went on diversion at least once during a 24-hour period was 60.4% during the preimplementation period and 20% in the postimplementation periods (P model, the use of the new protocol was significantly associated with decreased odds of diversion rate in the postimplementation period (odds ratio, 0.32; 95% confidence interval, 0.21-0.48). Our predivert/full-capacity protocol is a simple and generalizable strategy that can be implemented within the boundaries of the ED and is significantly associated with a decreased diversion rate. Copyright © 2012 Elsevier Inc. All rights reserved.

  20. The Influence of Grain Refiners on the Efficiency of Ceramic Foam Filters

    Science.gov (United States)

    Towsey, Nicholas; Schneider, Wolfgang; Krug, Hans-Peter; Hardman, Angela; Keegan, Neil J.

    An extensive program of work has been carried out to evaluate the efficiency of ceramic foam filters under carefully controlled conditions. Work reported at previous TMS meetings showed that in the absence of grain refiners, ceramic foam filters have the capacity for high filtration efficiency and consistent, reliable performance. The current phase of the investigation focuses on the impact grain refiner additions have on filter performance. The high filtration efficiencies obtained using 50 or 80ppi CFF's in the absence of grain refiners diminish when Al-3%Ti-1%B grain refiners are added. This, together with the impact of incoming inclusion loading on filter performance and the level of grain refiner addition are considered in detail. The new generation Al-3%Ti-0.15%C grain refiner has also been included. At typical addition levels (1kg/tonne) the effect on filter efficiency is similar to that for TiB2based grain refiners. The work was again conducted on a production scale using AA1050 alloy. Metal quality was determined using LiMCA and PoDFA. Spent filters were also analysed.

  1. Effect Of A “No Superuser Opioid Prescription” Policy On ED Visits And Statewide Opioid Prescription

    Directory of Open Access Journals (Sweden)

    Zachary P. Kahler

    2017-07-01

    Full Text Available Introduction: The U.S. opioid epidemic has highlighted the need to identify patients at risk of opioid abuse and overdose. We initiated a novel emergency department- (ED based interventional protocol to transition our superuser patients from the ED to an outpatient chronic pain program. The objective was to evaluate the protocol’s effect on superusers’ annual ED visits. Secondary outcomes included a quantitative evaluation of statewide opioid prescriptions for these patients, unique prescribers of controlled substances, and ancillary testing. Methods: Patients were referred to the program with the following inclusion criteria: ≥ 6 visits per year to the ED; at least one visit identified by the attending physician as primarily driven by opioid-seeking behavior; and a review by a committee comprising ED administration and case management. Patients were referred to a pain management clinic and informed that they would no longer receive opioid prescriptions from visits to the ED for chronic pain complaints. Electronic medical record (EMR alerts notified ED providers of the patient’s referral at subsequent visits. We analyzed one year of data pre- and post-referral. Results: A total of 243 patients had one year of data post-referral for analysis. Median annual ED visits decreased from 14 to 4 (58% decrease, 95% CI [50 to 66]. We also found statistically significant decreases for these patients’ state prescription drug monitoring program (PDMP opioid prescriptions (21 to 13, total unique controlled-substance prescribers (11 to 7, computed tomography imaging (2 to 0, radiographs (5 to 1, electrocardiograms (12 to 4, and labs run (47 to 13. Conclusion: This program and the EMR-based alerts were successful at decreasing local ED visits, annual opioid prescriptions, and hospital resource allocation for this population of patients. There is no evidence that these patients diverted their visits to neighboring EDs after being informed that they

  2. Strategic issues and implications for the refining and marketing sector

    International Nuclear Information System (INIS)

    Jeffe, R.A.

    1995-01-01

    Refiners have faced a challenging business environment for the past decade. During this period, the industry has made approximately $25 billion of capital expenditures primarily to comply with increased governmental mandates, faced highly volatile petroleum product prices and garnered a return to equity of only 5%. While worldwide and US refining capacity has been flat in recent years, demand for refined petroleum products has been on the upswing and domestic supplies have also increased due to improved US capacity utilization rates (76% in 1984 and 93% in 1994) and increased imports (gasoline sales up 11% since 1984). The result has been highly volatile and generally weak refining margins (net Gulf Coast crack spread ranging from ($.95)/bbl in 1984 to $1.84/bbl in 1990 and averaging $.81/bbl since 1984). In response to the sustained difficulties in the marketplace, one has recently witnessed some strategic realignment in the industry. Several of the integrated companies, frustrated with the required capital expenditures and meager returns, have decided to shed non-core, non-strategic refining assets. For the most part, these assets have been bought by independents at, by historical measures, very attractive terms. This paper will provide an overview of the economics of the refining business, discuss the recent trends in refinery M and A activity and summarize possible implications of the recent strategic realignment

  3. The University Supervisor, edTPA, and the New Making of the Teacher

    Science.gov (United States)

    Donovan, Martha K.; Cannon, Susan O.

    2018-01-01

    As university supervisors at a large, urban university in the southern US, we examined the ways that the Education Teacher Performance Assessment (edTPA) shaped the pedagogic relationships and decision-making processes of our students and ourselves during the spring of 2016. We situated this study of edTPA within the framework of critical policy…

  4. Preparation of Al-Ti-B grain refiner by SHS technology

    International Nuclear Information System (INIS)

    Nikitin, V.I.; Wanqi, J.I.E.; Kandalova, E.G.; Makarenko, A.G.; Yong, L.

    2000-01-01

    Since the discovery of the grain refinement effect of aluminum by titanium, especially with the existence of B or C in 1950, grain refiners are widely accepted in industry for microstructure control of aluminum alloys. Research on this topic is to obtain the highest grain refinement efficiency with the lowest possible addition of master alloy. It is widely accepted that the morphology and size of TiAl 3 particles, which are known as heterogeneous nucleation centers, are important factors deterring the grain refinement efficiency. Fine TiAl 3 particles are favorable. The grain refinement process shows a heredity phenomenon, which means that structural information from initial materials transfers through a melt to the final product. It is important to find the connection between microstructural parameters of the master alloy and the final product. To improve the quality of Al-Ti-B master alloys for the use as a grain refiner, a new method based on SHS (self-propagating high-temperature synthesis) technology has been developed in Samara State Technical University to produce the master alloys. SHS, as a new method for preparation of materials, was first utilized by Merzhanov in 1967. This method uses the energy from highly exothermic reactions to sustain the chemical reaction in a combustion wave. The advantages of SHS include simplicity, low energy requirement, and higher product purity. Because SHS reactions can take place between elemental reactants, it is easy to control product composition. The purposes of this investigation were to fabricate an SHS Al-5%Ti-1%B master alloy, to analyze its structure and to test its grain refining performance

  5. Formal refinement of extended state machines

    Directory of Open Access Journals (Sweden)

    Thomas Fayolle

    2016-06-01

    Full Text Available In a traditional formal development process, e.g. using the B method, the informal user requirements are (manually translated into a global abstract formal specification. This translation is especially difficult to achieve. The Event-B method was developed to incrementally and formally construct such a specification using stepwise refinement. Each increment takes into account new properties and system aspects. In this paper, we propose to couple a graphical notation called Algebraic State-Transition Diagrams (ASTD with an Event-B specification in order to provide a better understanding of the software behaviour. The dynamic behaviour is captured by the ASTD, which is based on automata and process algebra operators, while the data model is described by means of an Event-B specification. We propose a methodology to incrementally refine such specification couplings, taking into account new refinement relations and consistency conditions between the control specification and the data specification. We compare the specifications obtained using each approach for readability and proof complexity. The advantages and drawbacks of the traditional approach and of our methodology are discussed. The whole process is illustrated by a railway CBTC-like case study. Our approach is supported by tools for translating ASTD's into B and Event-B into B.

  6. Mirror of the refined topological vertex from a matrix model

    CERN Document Server

    Eynard, B

    2011-01-01

    We find an explicit matrix model computing the refined topological vertex, starting from its representation in terms of plane partitions. We then find the spectral curve of that matrix model, and thus the mirror symmetry of the refined vertex. With the same method we also find a matrix model for the strip geometry, and we find its mirror curve. The fact that there is a matrix model shows that the refined topological string amplitudes also satisfy the remodeling the B-model construction.

  7. Effect of Chemical Refining on Citrullus Colocynthis and Pongamia ...

    African Journals Online (AJOL)

    Oil from the both plant seeds was evaluated (both before and after refining) for different physico-chemical parameters like free fatty acids, iodine value, peroxide value, saponification value, unsaponifiable matter and fatty acid composition. Oil yield (30-35 %) in both plants was found average. After refining, per cent reduction ...

  8. Strategies for Elevating the Public and Professional Regard of the Ed.D.

    Science.gov (United States)

    Guthrie, James W.; Marsh, David D.

    2009-01-01

    A nationwide strategy for improving Ed.D. programs is needed to overcome two important dilemmas that are typical in schools of education: low academic status for Ed.D. programs and an overreliance on tuition as a source of revenue. Other major hindrances are the lack of agreement about research-based standards, a weak alignment with other elements…

  9. Designing a Peer-Mentoring Program for Education Doctorate (EdD) Students

    OpenAIRE

    Kendra Lowery; Rachel Geesa; Kat McConnell

    2018-01-01

    Objectives: In preparation for creating a peer-mentoring program for education doctorate (EdD) students, we conducted a literature review to learn about the characteristics of peer-mentoring programs for graduate students and EdD students specifically. Method: Our search criteria included articles about peer mentoring for graduate students only; published in peer-reviewed journals since the year 2000; and about programs that involved more experienced students, students farther along in t...

  10. Impact of prospective verification of intravenous antibiotics in an ED.

    Science.gov (United States)

    Hunt, Allyson; Nakajima, Steven; Hall Zimmerman, Lisa; Patel, Manav

    2016-12-01

    Delay in appropriate antibiotic therapy is associated with an increase in mortality and prolonged length of stay. Automatic dispensing machines decrease the delivery time of intravenous (IV) antibiotics to patients in the emergency department (ED). However, when IV antibiotics are not reviewed by pharmacists before being administered, patients are at risk for receiving inappropriate antibiotic therapy. The objective of this study was to determine if a difference exists in the time to administration of appropriate antibiotic therapy before and after implementation of prospective verification of antibiotics in the ED. This retrospective, institutional review board-approved preimplementation vs postimplementation study evaluated patients 18years or older who were started on IV antibiotics in the ED. Patients were excluded if pregnant, if the patient is a prisoner, if no cultures were drawn, or if the patient was transferred from an outside facility. Appropriate antibiotic therapy was based on empiric source-specific evidence-based guidelines, appropriate pharmacokinetic and pharmacodynamic properties, and microbiologic data. The primary end point was the time from ED arrival to administration of appropriate antibiotic therapy. Of the 1628 evaluated, 128 patients met the inclusion criteria (64 pre vs 64 post). Patients were aged 65.2±17.0years, with most of infections being pneumonia (44%) and urinary tract infections (18%) and most patients being noncritically ill. Time to appropriate antibiotic therapy was reduced in the postgroup vs pregroup (8.1±8.6 vs 15.2±22.8hours, respectively, P=.03). In addition, appropriate empiric antibiotics were initiated more frequently after the implementation (92% post vs 66% pre; P=.0001). There was no difference in mortality or length of stay between the 2 groups. Prompt administration of the appropriate antibiotics is imperative in patients with infections presenting to the ED. The impact of prospective verification of

  11. oneED: Embedding a mindfulness-based wellness programme into an emergency department.

    Science.gov (United States)

    Braganza, Shahina; Young, Jessica; Sweeny, Amy; Brazil, Victoria

    2018-03-30

    ED staff are subject to many stressors, but there are few descriptions of collective approaches to enhancing wellness in this setting. We aim to describe a programme developed to address these issues at department level, to report the feasibility and sustainability of the programme, and its impact on staff. The oneED programme was developed and delivered in a tertiary ED. The programme included a 1 day mindfulness workshop, followed by ongoing mindfulness activities embedded in clinical areas over the subsequent 12 months. A mixed-methods evaluation of the programme was conducted, which included quantitative validated psychological tools to measure anxiety, depression and emotional exhaustion, and pragmatic evaluation using surveys of participants and iterative appreciative inquiry. Eighty staff members attended the mindfulness workshop; 66 from ED. Following the workshop, understanding and frequency of mindfulness practice increased significantly in 47% of participants. Free-text survey results demonstrated that staff found the programme to be acceptable (80% survey participants) and of perceived value to themselves (50%) and the ED (60%). Appreciative inquiry led to modification of the programme: the 4 min pause is now conducted weekly rather than daily, the pause consists of a variety of activities, and group activities are made more overtly optional. A departmental wellness programme embedding mindfulness practice is feasible and sustainable. Potential for success is enhanced by an approach that is open to modification according to each institution's culture. © 2018 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

  12. Refined analysis results for multimedia network costs and profits

    DEFF Research Database (Denmark)

    Tahkokorpi, M.; Falch, Morten; Skouby, Knud Erik

    This deliverable describes the techno-economic business model developed in EURORIM WP3 and presents the refined results of the multimedia service delivery cost-profit calculations......This deliverable describes the techno-economic business model developed in EURORIM WP3 and presents the refined results of the multimedia service delivery cost-profit calculations...

  13. Refining and petrochemicals

    International Nuclear Information System (INIS)

    Benazzi, E.

    2003-01-01

    Down sharply in 2002, refining margins showed a clear improvement in the first half-year of 2003. As a result, the earnings reported by oil companies for financial year 2002 were significantly lower than in 2001, but the prospects are brighter for 2003. In the petrochemicals sector, slow demand and higher feedstock prices eroded margins in 2002, especially in Europe and the United States. The financial results for the first part of 2003 seem to indicate that sector profitability will not improve before 2004. (author)

  14. Refining of biodiesel by ceramic membrane separation

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yong; Ou, Shiyi; Tan, Yanlai; Tang, Shuze [Department of Food Science and Engineering, Jinan University, Guangzhou 510632 (China); Wang, Xingguo; Liu, Yuanfa [School of Food Science and Technology, Jiangnan University, Wuxi 214112 (China)

    2009-03-15

    A ceramic membrane separation process for biodiesel refining was developed to reduce the considerable usage of water needed in the conventional water washing process. Crude biodiesel produced by refined palm oil was micro-filtered by ceramic membranes of the pore size of 0.6, 0.2 and 0.1 {mu}m to remove the residual soap and free glycerol, at the transmembrane pressure of 0.15 MPa and temperature of 60 C. The flux through membrane maintained at 300 L m{sup -} {sup 2} h{sup -} {sup 1} when the volumetric concentrated ratio reached 4. The content of potassium, sodium, calcium and magnesium in the whole permeate was 1.40, 1.78, 0.81 and 0.20 mg/kg respectively, as determined by inductively coupled plasma-atomic emission spectroscopy. These values are lower than the EN 14538 specifications. The residual free glycerol in the permeate was estimated by water extraction, its value was 0.0108 wt.%. This ceramic membrane technology was a potential environmental process for the refining of biodiesel. (author)

  15. Production of Al-Ti-C grain refiners with the addition of elemental carbon

    International Nuclear Information System (INIS)

    Gezer, Berke Turgay; Toptan, Fatih; Daglilar, Sibel; Kerti, Isil

    2010-01-01

    Grain refining process used in aluminium alloys, has an important role for preventing columnar, coarse grains and encouraging fine, equiaxed grain formation. Al-Ti-B grain refiners are widely used as aluminium grain refiners despite the problems in application Al-Ti-C refiners have an increasing demand in recent years. In the present work, Al-Ti-C grain refiners with different Ti:C ratios were produced by insitu method with the addition of elemental carbon. Microstructures were characterised by optic microscope and scanning electron microscope equipped with energy dispersive spectroscopy. The effects of temperature, holding time and Ti:C ratio on the grain refinement process were investigated and optimum conditions were determined.

  16. European oil refining: strategies for a competitive future

    International Nuclear Information System (INIS)

    MacDonald, James.

    1997-07-01

    European Oil Refining investigates how the industry came to be in crisis and what the future holds. As well as an extensive analysis of past and present market shifts, the report predicts likely future developments and their consequences for investors. The report reviews the European oil sector in a global context, calculates the cost to refiners of key environmental legislation, assesses the problems caused by changing product demand and crude supply, examines possible solutions to the problems of low margins and overcapacity, evaluates the key players' main strategies to increase their competitiveness, analyses the western European oil refining industry by country, details the refinery operations of the major countries of central and eastern Europe, profiles 15 of the major oil companies and estimates the increase in investment required as a result of legislative and demand changes. (author)

  17. Current research progress in grain refinement of cast magnesium alloys: A review article

    International Nuclear Information System (INIS)

    Ali, Yahia; Qiu, Dong; Jiang, Bin; Pan, Fusheng; Zhang, Ming-Xing

    2015-01-01

    Grain refinement of cast magnesium alloys, particularly in magnesium–aluminium (Mg–Al) based alloys, has been an active research topic in the past two decades, because it has been considered as one of the most effective approaches to simultaneously increase the strength, ductility and formability. The development of new grain refiners was normally based on the theories/models that were established through comprehensive and considerable studies of grain refinement in cast Al alloys. Generally, grain refinement in cast Al can be achieved through either inoculation treatment, which is a process of adding, or in situ forming, foreign particles to promote heterogeneous nucleation rate, or restricting grain growth by controlling the constitutional supercooling or both. But, the concrete and tangible grain refinement mechanism in cast metals is still not fully understood and there are a number of controversies. Therefore, most of the new developed grain refiners for Mg–Al based alloys are not as efficient as the commercially available ones, such as zirconium in non-Al containing Mg alloys. To facilitate the research in grain refinement of cast magnesium alloys, this review starts with highlighting the theoretical aspects of grain refinement in cast metals, followed by reviewing the latest research progress in grain refinement of magnesium alloys in terms of the solute effect and potent nucleants

  18. Current research progress in grain refinement of cast magnesium alloys: A review article

    Energy Technology Data Exchange (ETDEWEB)

    Ali, Yahia; Qiu, Dong [School of Mechanical and Mining Engineering, University of Queensland, St Lucia, QLD 4072 (Australia); Jiang, Bin; Pan, Fusheng [College of Materials Science and Engineering, Chongqing University, Chongqing 400030 (China); Zhang, Ming-Xing, E-mail: Mingxing.Zhang@uq.edu.au [School of Mechanical and Mining Engineering, University of Queensland, St Lucia, QLD 4072 (Australia)

    2015-01-15

    Grain refinement of cast magnesium alloys, particularly in magnesium–aluminium (Mg–Al) based alloys, has been an active research topic in the past two decades, because it has been considered as one of the most effective approaches to simultaneously increase the strength, ductility and formability. The development of new grain refiners was normally based on the theories/models that were established through comprehensive and considerable studies of grain refinement in cast Al alloys. Generally, grain refinement in cast Al can be achieved through either inoculation treatment, which is a process of adding, or in situ forming, foreign particles to promote heterogeneous nucleation rate, or restricting grain growth by controlling the constitutional supercooling or both. But, the concrete and tangible grain refinement mechanism in cast metals is still not fully understood and there are a number of controversies. Therefore, most of the new developed grain refiners for Mg–Al based alloys are not as efficient as the commercially available ones, such as zirconium in non-Al containing Mg alloys. To facilitate the research in grain refinement of cast magnesium alloys, this review starts with highlighting the theoretical aspects of grain refinement in cast metals, followed by reviewing the latest research progress in grain refinement of magnesium alloys in terms of the solute effect and potent nucleants.

  19. Note critiche sui rapporti tra diritto ed economia

    OpenAIRE

    Tuzet, Giovanni

    2017-01-01

    Il saggio inquadra teoricamente i principali rapporti fra diritto ed economia e analizza i vari metodi e approcci dell'analisi economica del diritto, rilvandone gli aspetti critici e discutendo infine gli approcci comportamentali e la "nudge theory".

  20. The relative contribution of provider and ED-level factors to variation among the top 15 reasons for ED admission.

    Science.gov (United States)

    Khojah, Imad; Li, Suhui; Luo, Qian; Davis, Griffin; Galarraga, Jessica E; Granovsky, Michael; Litvak, Ori; Davis, Samuel; Shesser, Robert; Pines, Jesse M

    2017-09-01

    We examine adult emergency department (ED) admission rates for the top 15 most frequently admitted conditions, and assess the relative contribution in admission rate variation attributable to the provider and hospital. This was a retrospective, cross-sectional study of ED encounters (≥18years) from 19 EDs and 603 providers (January 2012-December 2013), linked to the Area Health Resources File for county-level information on healthcare resources. "Hospital admission" was the outcome, a composite of inpatient, observation, or intra-hospital transfer. We studied the 15 most commonly admitted conditions, and calculated condition-specific risk-standardized hospital admission rates (RSARs) using multi-level hierarchical generalized linear models. We then decomposed the relative contribution of provider-level and hospital-level variation for each condition. The top 15 conditions made up 34% of encounters and 49% of admissions. After adjustment, the eight conditions with the highest hospital-level variation were: 1) injuries, 2) extremity fracture (except hip fracture), 3) skin infection, 4) lower respiratory disease, 5) asthma/chronic obstructive pulmonary disease (A&C), 6) abdominal pain, 7) fluid/electrolyte disorders, and 8) chest pain. Hospital-level intra-class correlation coefficients (ICC) ranged from 0.042 for A&C to 0.167 for extremity fractures. Provider-level ICCs ranged from 0.026 for abdominal pain to 0.104 for chest pain. Several patient, hospital, and community factors were associated with admission rates, but these varied across conditions. For different conditions, there were different contributions to variation at the hospital- and provider-level. These findings deserve consideration when designing interventions to optimize admission decisions and in value-based payment programs. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. Analysis model for forecasting extreme temperature using refined rank set pair

    Directory of Open Access Journals (Sweden)

    Qiao Ling-Xia

    2013-01-01

    Full Text Available In order to improve the precision of forecasting extreme temperature time series, a refined rank set pair analysis model with a refined rank transformation function is proposed to improve precision of its prediction. The measured values of the annual highest temperature of two China’s cities, Taiyuan and Shijiazhuang, in July are taken to examine the performance of a refined rank set pair model.

  2. Potency of high-intensity ultrasonic treatment for grain refinement of magnesium alloys

    International Nuclear Information System (INIS)

    Ramirez, A.; Qian Ma; Davis, B.; Wilks, T.; StJohn, D.H.

    2008-01-01

    High-intensity ultrasonic treatment (UT) for grain refinement of magnesium alloys has been investigated using a novel theoretical approach in order to better understand its grain-refining potential and the mechanism of nucleation. The process demonstrated significantly superior grain-refining potency to carbon inoculation for Al-containing magnesium alloys but inferior potency to zirconium for Al-free alloys. Details revealed by applying the theoretical approach to ultrasonic grain refinement provide new clues to understanding the mechanism of grain nucleation by UT

  3. Trends in heavy oil production and refining in California

    International Nuclear Information System (INIS)

    Olsen, D.K.; Ramzel, E.B.; Pendergrass, R.A. II.

    1992-07-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production and is part of a study being conducted for the US Department of Energy. This report summarizes trends in oil production and refining in Canada. Heavy oil (10 degrees to 20 degrees API gravity) production in California has increased from 20% of the state's total oil production in the early 1940s to 70% in the late 1980s. In each of the three principal petroleum producing districts (Los Angeles Basin, Coastal Basin, and San Joaquin Valley) oil production has peaked then declined at different times throughout the past 30 years. Thermal production of heavy oil has contributed to making California the largest producer of oil by enhanced oil recovery processes in spite of low oil prices for heavy oil and stringent environmental regulation. Opening of Naval Petroleum Reserve No. 1, Elk Hills (CA) field in 1976, brought about a major new source of light oil at a time when light oil production had greatly declined. Although California is a major petroleum-consuming state, in 1989 the state used 13.3 billion gallons of gasoline or 11.5% of US demand but it contributed substantially to the Nation's energy production and refining capability. California is the recipient and refines most of Alaska's 1.7 million barrel per day oil production. With California production, Alaskan oil, and imports brought into California for refining, California has an excess of oil and refined products and is a net exporter to other states. The local surplus of oil inhibits exploitation of California heavy oil resources even though the heavy oil resources exist. Transportation, refining, and competition in the market limit full development of California heavy oil resources

  4. Fetching and Parsing Data from the Web with OpenRefine

    Directory of Open Access Journals (Sweden)

    Evan Peter Williamson

    2017-08-01

    Full Text Available OpenRefine is a powerful tool for exploring, cleaning, and transforming data. An earlier Programming Historian lesson, “Cleaning Data with OpenRefine”, introduced the basic functionality of Refine to efficiently discover and correct inconsistency in a data set. Building on those essential data wrangling skills, this lesson focuses on Refine’s ability to fetch URLs and parse web content. Examples introduce some of the advanced features to transform and enhance a data set including: - fetch URLs using Refine - construct URL queries to retrieve information from a simple web API - parse HTML and JSON responses to extract relevant data - use array functions to manipulate string values - use Jython to extend Refine’s functionality It will be helpful to have basic familiarity with OpenRefine, HTML, and programming concepts such as variables and loops to complete this lesson.

  5. Missing the boat: odds for the patients who leave ED without being seen

    Directory of Open Access Journals (Sweden)

    Fayyaz Jabeen

    2013-01-01

    Full Text Available Abstract Background A patient left without being seen is a well-recognized indicator of Emergency Department overcrowding. The aim of this study was to define the characteristics of LWBS patients, their rates and associated factors from a tertiary care hospital of Pakistan. Methods A retrospective patient record review was undertaken. All patients presenting to the Aga Khan University Hospital, Karachi, between April and December of the year 2010, were included in the study. Information was collected on age, sex, presenting complaints, ED capacity, month, time, shift, day of the week, and waiting times in the ED. A basic descriptive analysis was made and the rates of LWBS patients were determined among the patient subgroups. Logistic regression analysis was used to assess the risk factors associated with a patient not being seen in the ED. Results A total of 38,762 patients visited ED during the study period. Among them 5,086 (13% patients left without being seen. Percentage of leaving was highest in the night shift (20%. The percentage was twice as high when the ED was on diversion (19.8% compared to regular periods of operation (9.8%. Mean waiting time before leaving the ED in pediatric patients was 154 minutes while for adults it was 171 minutes. More than 32% of patients had waited for more than 180 minutes before they left without being seen, compared to the patients who were seen in ED. Important predictors for LWBS included; Triage category P4 i.e. walk –in-patients had an OR of 13.62(8.72-21.3, Diversion status, OR 1.49(1.26-1.76, night shift , OR 2.44(1.95-3.05 and Pediatric age, OR 0.57(0.48-0.66. Conclusions Our study elucidates the LWBS population characteristics and identifies the risk factors for this phenomenon. Targeted interventions should be planned and implemented to decrease the waiting time and alternate services should be provided for high-risk patients (for LWBS to minimize their number.

  6. The implementation of Mask-Ed: reflections of academic participants.

    Science.gov (United States)

    Reid-Searl, Kerry; Levett-Jones, Tracy; Cooper, Simon; Happell, Brenda

    2014-09-01

    This paper profiles the findings from a study that explored the perspectives and experiences of nurse educators who implemented a novel simulation approach termed Mask-Ed. The technique involves the educator wearing a silicone mask and or body parts and transforming into a character. The premise of this approach is that the masked educator has domain specific knowledge related to the simulation scenario and can transmit this to learners in a way that is engaging, realistic, spontaneous and humanistic. Nurse educators charged with the responsibility of implementing Mask-Ed in three universities were invited to participate in the study by attending an introductory workshop, implementing the technique and then journaling their experiences, insights and perspectives over a 12 month period. The journal entries were then thematically analysed. Key themes were categorised under the headings of Preparation, Implementation and Impact; Reflexivity and Responsiveness; Student Engagement and Ownership; and Teaching and Learning. Mask-Ed is a simulation approach which allows students to interact with the 'characters' in humanistic ways that promote person-centred care and therapeutic communication. This simulation approach holds previously untapped potential for a range of learning experiences, however, to be effective, adequate resourcing, training, preparation and practice is required. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. "Etica ed Estetica sono tutt’uno" Riflessioni su TLP 6.421

    Directory of Open Access Journals (Sweden)

    Gabriele Tomasi

    2011-01-01

    Full Text Available Per il primo Wittgenstein etica ed estetica erano tutt’uno. Scopo del saggio è fornire un’interpretazione di questa concezione. Esaminando il modo in cui è proposta nel Tractatus e considerando alcune annotazioni dei Quaderni 1914-1916 si evidenzia che l’unità di etica ed estetica è in un modo di vedere il mondo per cui esso non appare come fonte di limitazione. L’etica è un’estensione al mondo - alla vita - della capacità di conferire significato che nell’arte si realizza nei riguardi di oggetti particolari. Affermando l’unità di etica ed estetica Wittgenstein attira l’attenzione sul fatto che la radice dell’etica è in un certo modo di vedere le cose, in un atteggiamento verso la vita. Si tratta della prospettiva di un valore non connesso a come il mondo è e che è evocato dalla meraviglia per l’esistenza del mondo.

  8. Genomic multiple sequence alignments: refinement using a genetic algorithm

    Directory of Open Access Journals (Sweden)

    Lefkowitz Elliot J

    2005-08-01

    Full Text Available Abstract Background Genomic sequence data cannot be fully appreciated in isolation. Comparative genomics – the practice of comparing genomic sequences from different species – plays an increasingly important role in understanding the genotypic differences between species that result in phenotypic differences as well as in revealing patterns of evolutionary relationships. One of the major challenges in comparative genomics is producing a high-quality alignment between two or more related genomic sequences. In recent years, a number of tools have been developed for aligning large genomic sequences. Most utilize heuristic strategies to identify a series of strong sequence similarities, which are then used as anchors to align the regions between the anchor points. The resulting alignment is globally correct, but in many cases is suboptimal locally. We describe a new program, GenAlignRefine, which improves the overall quality of global multiple alignments by using a genetic algorithm to improve local regions of alignment. Regions of low quality are identified, realigned using the program T-Coffee, and then refined using a genetic algorithm. Because a better COFFEE (Consistency based Objective Function For alignmEnt Evaluation score generally reflects greater alignment quality, the algorithm searches for an alignment that yields a better COFFEE score. To improve the intrinsic slowness of the genetic algorithm, GenAlignRefine was implemented as a parallel, cluster-based program. Results We tested the GenAlignRefine algorithm by running it on a Linux cluster to refine sequences from a simulation, as well as refine a multiple alignment of 15 Orthopoxvirus genomic sequences approximately 260,000 nucleotides in length that initially had been aligned by Multi-LAGAN. It took approximately 150 minutes for a 40-processor Linux cluster to optimize some 200 fuzzy (poorly aligned regions of the orthopoxvirus alignment. Overall sequence identity increased only

  9. Need for refining capacity creates opportunities for producers in Middle East

    International Nuclear Information System (INIS)

    Ali, M.S.S.

    1994-01-01

    Oil industry interest in refining has revived in the past few years in response to rising oil consumption. The trend creates opportunities, for countries in the Middle East, which do not own refining assets nearly in proportion to their crude oil reserved. By closing this gap between reserves and refining capacity, the countries can ease some of the instability now characteristic of the oil market. Some major oil producing countries have begun to move downstream. During the 1980s, Venezuela, Kuwait, Saudi Arabia, Libya, and other members of the Organization of Petroleum Exporting Countries acquired refining assets through direct total purchase or joint ventures. Nevertheless, the oil industry remains largely unintegrated, with the Middle East holding two thirds of worldwide oil reserves but only a small share downstream. As worldwide refining capacity swings from a period of surplus toward one in which the need for new capacity will be built. The paper discusses background of the situation, shrinking surplus, investment requirements, sources of capital, and shipping concerns

  10. A grid-enabled web service for low-resolution crystal structure refinement.

    Science.gov (United States)

    O'Donovan, Daniel J; Stokes-Rees, Ian; Nam, Yunsun; Blacklow, Stephen C; Schröder, Gunnar F; Brunger, Axel T; Sliz, Piotr

    2012-03-01

    Deformable elastic network (DEN) restraints have proved to be a powerful tool for refining structures from low-resolution X-ray crystallographic data sets. Unfortunately, optimal refinement using DEN restraints requires extensive calculations and is often hindered by a lack of access to sufficient computational resources. The DEN web service presented here intends to provide structural biologists with access to resources for running computationally intensive DEN refinements in parallel on the Open Science Grid, the US cyberinfrastructure. Access to the grid is provided through a simple and intuitive web interface integrated into the SBGrid Science Portal. Using this portal, refinements combined with full parameter optimization that would take many thousands of hours on standard computational resources can now be completed in several hours. An example of the successful application of DEN restraints to the human Notch1 transcriptional complex using the grid resource, and summaries of all submitted refinements, are presented as justification.

  11. Refining and petrochemicals

    International Nuclear Information System (INIS)

    Benazzi, E.; Alario, F.

    2004-01-01

    In 2003, refining margins showed a clear improvement that continued throughout the first three quarters of 2004. Oil companies posted significantly higher earnings in 2003 compared to 2002, with the results of first quarter 2004 confirming this trend. Due to higher feedstock prices, the implementation of new capacity and more intense competition, the petrochemicals industry was not able to boost margins in 2003. In such difficult business conditions, aggravated by soaring crude prices, the petrochemicals industry is not likely to see any improvement in profitability before the second half of 2004. (author)

  12. Initiating technical refinements in high-level golfers: Evidence for contradictory procedures.

    Science.gov (United States)

    Carson, Howie J; Collins, Dave; Richards, Jim

    2016-01-01

    When developing motor skills there are several outcomes available to an athlete depending on their skill status and needs. Whereas the skill acquisition and performance literature is abundant, an under-researched outcome relates to the refinement of already acquired and well-established skills. Contrary to current recommendations for athletes to employ an external focus of attention and a representative practice design,  Carson and  Collins' (2011) [Refining and regaining skills in fixation/diversification stage performers: The Five-A Model. International Review of Sport and Exercise Psychology, 4, 146-167. doi: 10.1080/1750984x.2011.613682 ] Five-A Model requires an initial narrowed internal focus on the technical aspect needing refinement: the implication being that environments which limit external sources of information would be beneficial to achieving this task. Therefore, the purpose of this paper was to (1) provide a literature-based explanation for why techniques counter to current recommendations may be (temporarily) appropriate within the skill refinement process and (2) provide empirical evidence for such efficacy. Kinematic data and self-perception reports are provided from high-level golfers attempting to consciously initiate technical refinements while executing shots onto a driving range and into a close proximity net (i.e. with limited knowledge of results). It was hypothesised that greater control over intended refinements would occur when environmental stimuli were reduced in the most unrepresentative practice condition (i.e. hitting into a net). Results confirmed this, as evidenced by reduced intra-individual movement variability for all participants' individual refinements, despite little or no difference in mental effort reported. This research offers coaches guidance when working with performers who may find conscious recall difficult during the skill refinement process.

  13. ReEDS-Mexico: A Capacity Expansion Model of the Mexican Power System

    Energy Technology Data Exchange (ETDEWEB)

    Ho, Jonathan L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Cole, Wesley J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Spyrou, Evangelia [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-29

    This report documents the ReEDS-Mexico capacity expansion model, which is an extension of the ReEDS model to the Mexican power system. In recent years Mexico’s power sector has undergone considerable reform that has significant potential to impact the future electricity mix (Alpizar–Castro and Rodríguez–Monroy 2016). Day-ahead and real-time trading in Mexico’s power markets opened in early 2016. In addition to this reform, Mexico is striving to ensure that 35% of its electricity is generated from clean energy sources by 2024, 40% by 2035, and 50% by 2050 (Presidencia de la República 2016). These rapid changes in both the market and the generation mix create a need for robust tools that can help electricity sector stakeholders make informed decisions. The purpose of this report is to document the extension of the National Renewable Energy Laboratory’s (NREL’s) Regional Energy Deployment System (ReEDS) model (Eurek et al. 2016) to cover the Mexico power system. This extension, which we will refer to throughout this paper as ReEDS-Mexico, provides a model of the Mexico power sector using a system-wide, least-cost optimization framework.

  14. Grain refinement through severe plastic deformation (SPD) processing

    International Nuclear Information System (INIS)

    Izairi, N.; Vevecka - Priftaj, A.

    2012-01-01

    There is considerable current interest in processing metallic samples through procedures involving the imposition of severe plastic deformation (SPD). These procedures lead to very significant grain refinement to the submicrometer or even the nanometer level, resulting in advanced physical properties. Among various SPD processes, Equal Channel Angular Pressing, High pressure Torsion and Accumulated Roll Bonding have been widely used for many metals and alloys. In the present work, we present an overview of the most used methods of SPD for grain refinement and the production of bulk nano structured materials with enhancement in their mechanical and functional properties. In order to examine the potential for using ECAP to refine the grain size and improve the mechanical properties, two commercial 5754 Al alloy and AA 3004 , were selected for study. Processing by ECAP gives a reduction in the grain size and an increase in the microhardness. (Author)

  15. Future prospects for palm oil refining and modifications

    Directory of Open Access Journals (Sweden)

    Gibon Véronique

    2009-07-01

    Full Text Available Palm oil is rich in minor components that impart unique nutritional properties and need to be preserved. In this context, refining technologies have been improved, with the dual temperature deodorizer, the double condensing unit and the ice condensing system. The DOBI is a good tool to assess quality of the crude palm oil and its ability to be properly refined. Specially refined oils open a market for new high quality products (golden palm oil, red palm oil, white soaps, etc.. Palm oil is a good candidate for the multi-step dry fractionation process, aiming to the production of commodity oils and specialty fats (cocoa butter replacers. New technological developments allow quality and yield improvements. Palm oil and fractions are also valuable feedstock for enzymatic interesterification in which applications are for commodity oil (low-trans margarines and shortenings and for special products (cocoa butter equivalents, infant formulation, ….

  16. Unilever food safety assurance system for refined vegetable oils and fats

    Directory of Open Access Journals (Sweden)

    van Duijn Gerrit

    2010-03-01

    Full Text Available The Unilever Food Safety Assurance system for refined oils and fats is based on risk assessments for the presence of contaminants or pesticide residues in crude oils, and refining process studies to validate the removal of these components. Crude oil risk assessments were carried out by combining supply chain visits, and analyses of the contaminant and pesticide residue levels in a large number of crude oil samples. Contaminants like poly-aromatic hydrocarbons and hydrocarbons of mineral origin, and pesticide residues can largely be removed by refining. For many years, this Food Safety Assurance System has proven to be effective in controlling contaminant levels in refined vegetable oils and fats.

  17. Hirshfeld atom refinement for modelling strong hydrogen bonds.

    Science.gov (United States)

    Woińska, Magdalena; Jayatilaka, Dylan; Spackman, Mark A; Edwards, Alison J; Dominiak, Paulina M; Woźniak, Krzysztof; Nishibori, Eiji; Sugimoto, Kunihisa; Grabowsky, Simon

    2014-09-01

    High-resolution low-temperature synchrotron X-ray diffraction data of the salt L-phenylalaninium hydrogen maleate are used to test the new automated iterative Hirshfeld atom refinement (HAR) procedure for the modelling of strong hydrogen bonds. The HAR models used present the first examples of Z' > 1 treatments in the framework of wavefunction-based refinement methods. L-Phenylalaninium hydrogen maleate exhibits several hydrogen bonds in its crystal structure, of which the shortest and the most challenging to model is the O-H...O intramolecular hydrogen bond present in the hydrogen maleate anion (O...O distance is about 2.41 Å). In particular, the reconstruction of the electron density in the hydrogen maleate moiety and the determination of hydrogen-atom properties [positions, bond distances and anisotropic displacement parameters (ADPs)] are the focus of the study. For comparison to the HAR results, different spherical (independent atom model, IAM) and aspherical (free multipole model, MM; transferable aspherical atom model, TAAM) X-ray refinement techniques as well as results from a low-temperature neutron-diffraction experiment are employed. Hydrogen-atom ADPs are furthermore compared to those derived from a TLS/rigid-body (SHADE) treatment of the X-ray structures. The reference neutron-diffraction experiment reveals a truly symmetric hydrogen bond in the hydrogen maleate anion. Only with HAR is it possible to freely refine hydrogen-atom positions and ADPs from the X-ray data, which leads to the best electron-density model and the closest agreement with the structural parameters derived from the neutron-diffraction experiment, e.g. the symmetric hydrogen position can be reproduced. The multipole-based refinement techniques (MM and TAAM) yield slightly asymmetric positions, whereas the IAM yields a significantly asymmetric position.

  18. Oil price scenarios and refining profitability

    International Nuclear Information System (INIS)

    Sweeney, B.

    1993-01-01

    Currently refining profitability is low because there has been an overbuilding of conversion capacity in Western Europe in the last round. Oil marketing, the chemicals business and the fundamental economy itself are at low points in their cycles which have not coincided, at least in the UK, since 1975. Against that gloomy background, it is predicted that downstream profitability will recover in the mid-1990s. Crude oil prices will remain low until the call on OPEC crude increases again and takes up the capacity which has been brought on stream in response to the Gulf War. When this happens, it is likely to trigger another price spike and another round of investment in production capacity. Environmentally driven investments in desulphurisation or emissions reduction will be poorly remunerated all the way through the value chain. Refining margins will recover when white oil demand growth tightens up the need for conversion capacity. Marketing will need to reduce the retail network overcapacity in the mature markets if it is to improve its profitability. In this period of low profitability, even with the light at the end of the tunnel for refiners in the middle of the decade, the industry structure is under threat. There is a strong argument for new modes of competitive behaviour which are backed by strong elements of cooperation. (author)

  19. The administration sequence of propofol and remifentanil does not affect the ED50 and ED95 of rocuronium in rapid sequence induction of anesthesia: a double-blind randomized controlled trial.

    Science.gov (United States)

    Ozcelik, M; Guclu, C; Bermede, O; Baytas, V; Altay, N; Karahan, M A; Erdogan, B; Can, O

    2016-04-01

    The topic of drug administration sequence in rapid sequence induction (RSI) is still an object of interest in terms of rocuronium effectiveness. The aim of this prospective, randomized trial was to evaluate the effect of administration sequence of propofol and remifentanil on ED50 and ED95 of rocuronium in a RSI model. Eighty-four patients were randomized into Group Remifentanil (Group R, n = 43), where induction of general anesthesia started with remifentanil (2 µg/kg) and followed by propofol (2 mg/kg) and rocuronium administrations; and Group Propofol (Group P, n = 41), where induction of general anesthesia started with propofol and followed by remifentanil and rocuronium. First patients in each group were paralyzed by 0.8 mg/kg rocuronium. In case of acceptable intubation as evaluated according to the criteria described by Viby-Mogensen et al, rocuronium dose was decreased by 0.1 mg/kg for the next patient; otherwise, rocuronium dose was increased by 0.1 mg/kg. After three crossover points, increments or decrements in rocuronium dosage were set to 0.05 mg/kg. The process was repeated until a total of ten crossover points were obtained. The ED50 and ED95 doses of rocuronium were similar in Group R (0.182 mg/kg, and 0.244 mg/kg, respectively) and Group P (0.121 mg/kg, and 0.243 mg/kg, respectively) according to 95% CI of the estimates. There was no statistically significant difference in terms of clinically acceptable intubation conditions between the two groups (56.1% in Group R vs. 59% in Group P, p = 0.795). The choice of administration sequence of propofol and remifentanil does not have an impact on estimated ED50 and ED95 of rocuronium in providing acceptable intubation conditions in the RSI technique.

  20. EdF let Germans manage Stredoslovenska Energetika

    International Nuclear Information System (INIS)

    Janoska, J.

    2003-01-01

    According to provisions of privatisation and shareholders agreement Stredoslovenska energetika (SSE), a.s., Zilina should be managed by the largest European power concern Electricite de France (EdF). But so far, one year after the acquisition, the only French member of the Supervisory board is its Chairman Patrick Luccioni. The Board has 5 members and two of them are German - Peter Weis and Martin Konerman. The latter joined in September this year. He came to Slovakia after years spent in Boards of Hungarian distribution companies - Elmu in Budapest and Emasz in Miskolcz. The name of Peter Weis still can be found on the web page of Emasz on the list of members of Supervisory Board. Strategic partner in both the mentioned Hungarian distribution companies is the third largest player on the German energy market - Energie Baden-Wurttemberg (EnBW). The French concern with its 35-percent stake is the biggest individual shareholder of the EnBW. EdF is reassessing its international projects. Due to an investment embargo the French will not be among the prospects interested in acquisition of Slovenske elektrarne, a.s., Bratislava but the company management has also announced its intention to sell its minority stakes in northern and eastern Europe. The Paris head office of EdF announced its decision in the time when privatisation of Slovak distribution companies was culminating. And so in order to maintain its influence the 49-percent stake in SSE together with management control over the company will be transferred to EnBW. Spokeswoman of EnBW, Petra Wollmer did not say the company would not plan any acquisitions in area of its core business but stressed that these would have to be thoroughly examined. She did not wish to comment on any potential plans the company may have in Slovakia or that would relate to changes in the management bodies of SSE. Not even the Head of Communication Department of the Slovak distribution company, Pavel Muller was allowed to publish any

  1. lsnjbhakta@gmail.com A Comparative SEM-EDS Elemental

    African Journals Online (AJOL)

    Michael Horsfall

    effect on food production in terrestrial and aquatic compartment in ... Processing and SEM-EDS analysis of mud: In the laboratory, the ... and for SEM image observation was 15 kV, applying .... by weathering in the Omi acid clay deposit, Japan.

  2. A Novel Semiconductor CIGS Photovoltaic Material and Thin-Film ED Technology

    Institute of Scientific and Technical Information of China (English)

    无

    2001-01-01

    In order to achieve low-cost high-efficiency thin-film solar cells, a novel Semiconductor Photovoltaic (PV) active material CuIn1-xGaxSe2 (CIGS) and thin-film Electro-Deposition (ED) technology is explored. Firstly,the PV materials and technologies is investigated, then the detailed experimental processes of CIGS/Mo/glass structure by using the novel ED technology and the results are reported. These results shows that high quality CIGS polycrystalline thin-films can be obtained by the ED method, in which the polycrystalline CIGS is definitely identified by the (112), (204, 220) characteristic peaks of the tetragonal structure, the continuous CIGS thin-film layers with particle average size of about 2μm of length and around 1.6μm of thickness. The thickness and solargrade quality of CIGS thin-films can be produced with good repeatability. Discussion and analysis on the ED technique, CIGS energy band and sodium (Na) impurity properties, were also performed. The alloy CIGS exhibits not only increasing band-gap with increasing x, but also a change in material properties that is relevant to the device operation. The beneficial impurity Na originating from the low-cost soda-lime glass substrate becomes one prerequisite for high quality CIGS films. These novel material and technology are very useful for low-cost high-efficiency thin-film solar cells and other devices.

  3. Influences of different degassing processes on refining effect and properties of 4004 Al alloy

    Directory of Open Access Journals (Sweden)

    Wang Liping

    2013-03-01

    Full Text Available In order to improve the plasticity of 4004 Al alloy and subsequently the productivity of 4004 Al foil, the research studied in detail the influence of the rotary impeller degassing process on the refining effect of 4004 Al alloy, in which the impacts of four major parameters: gas flow, rotational speed, refining time, and stewing time, on degassing rate of 4004 Al alloy was systematically studied by using an orthogonal experiment methodology. Results show that the rotational speed has the greatest impact on the degassing of 4004 Al alloy, followed by gas flow and refining time; stewing time has the least impact. The optimum purification parameters obtained by current orthogonal analysis were: rotor speed of 500 r·min-1, inert gas flow of 0.4 mL·h-1, refining time of 15 min, and stewing time of 6 min. Degassing rate using the optimum parameters reaches 68%. In addition, the comparison experiments among C2Cl6 refining, rotary impeller degassing, and combined treatment of C2Cl6 refining and rotary impeller degassing for 4004 Al alloy were performed. The experimental data indicated that the combined treatment of C2Cl6 refining and rotary impeller degassing has the best degassing effect. Degassing rate of C2Cl6 refining, rotary impeller degassing and combined refining treatment is 39%, 69.1% and 76.9%, respectively. The mechanical properties of the specimen refined by rotary impeller degassing were higher than those by C2Cl6 refining, but lower than those by combined refining treatment.

  4. The Analysis of the Refined Financial Management of Modern Enterprises

    Directory of Open Access Journals (Sweden)

    Li Ran

    2016-01-01

    Full Text Available This paper briefly introduces the concept of the refined financial management, elaborates on its characteristics and puts forward some main points about it. It also comes up with some personal suggestions for reference on effective ways of refining financial management.

  5. Is scanning electron microscopy/energy dispersive X-ray spectrometry (SEM/EDS) quantitative?

    Science.gov (United States)

    Newbury, Dale E; Ritchie, Nicholas W M

    2013-01-01

    Scanning electron microscopy/energy dispersive X-ray spectrometry (SEM/EDS) is a widely applied elemental microanalysis method capable of identifying and quantifying all elements in the periodic table except H, He, and Li. By following the "k-ratio" (unknown/standard) measurement protocol development for electron-excited wavelength dispersive spectrometry (WDS), SEM/EDS can achieve accuracy and precision equivalent to WDS and at substantially lower electron dose, even when severe X-ray peak overlaps occur, provided sufficient counts are recorded. Achieving this level of performance is now much more practical with the advent of the high-throughput silicon drift detector energy dispersive X-ray spectrometer (SDD-EDS). However, three measurement issues continue to diminish the impact of SEM/EDS: (1) In the qualitative analysis (i.e., element identification) that must precede quantitative analysis, at least some current and many legacy software systems are vulnerable to occasional misidentification of major constituent peaks, with the frequency of misidentifications rising significantly for minor and trace constituents. (2) The use of standardless analysis, which is subject to much broader systematic errors, leads to quantitative results that, while useful, do not have sufficient accuracy to solve critical problems, e.g. determining the formula of a compound. (3) EDS spectrometers have such a large volume of acceptance that apparently credible spectra can be obtained from specimens with complex topography that introduce uncontrolled geometric factors that modify X-ray generation and propagation, resulting in very large systematic errors, often a factor of ten or more. © Wiley Periodicals, Inc.

  6. Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Report

    Science.gov (United States)

    Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

    2016-01-01

    In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…

  7. Improving ED specimen TAT using Lean Six Sigma.

    Science.gov (United States)

    Sanders, Janet H; Karr, Tedd

    2015-01-01

    Lean and Six Sigma are continuous improvement methodologies that have garnered international fame for improving manufacturing and service processes. Increasingly these methodologies are demonstrating their power to also improve healthcare processes. The purpose of this paper is to discuss a case study for the application of Lean and Six Sigma tools in the reduction of turnaround time (TAT) for Emergency Department (ED) specimens. This application of the scientific methodologies uncovered opportunities to improve the entire ED to lab system for the specimens. This case study provides details on the completion of a Lean Six Sigma project in a 1,000 bed tertiary care teaching hospital. Six Sigma's Define, Measure, Analyze, Improve, and Control methodology is very similar to good medical practice: first, relevant information is obtained and assembled; second, a careful and thorough diagnosis is completed; third, a treatment is proposed and implemented; and fourth, checks are made to determine if the treatment was effective. Lean's primary goal is to do more with less work and waste. The Lean methodology was used to identify and eliminate waste through rapid implementation of change. The initial focus of this project was the reduction of turn-around-times for ED specimens. However, the results led to better processes for both the internal and external customers of this and other processes. The project results included: a 50 percent decrease in vials used for testing, a 50 percent decrease in unused or extra specimens, a 90 percent decrease in ED specimens without orders, a 30 percent decrease in complete blood count analysis (CBCA) Median TAT, a 50 percent decrease in CBCA TAT Variation, a 10 percent decrease in Troponin TAT Variation, a 18.2 percent decrease in URPN TAT Variation, and a 2-5 minute decrease in ED registered nurses rainbow draw time. This case study demonstrated how the quantitative power of Six Sigma and the speed of Lean worked in harmony to improve

  8. Effect of a redesigned fracture management pathway and 'virtual' fracture clinic on ED performance.

    Science.gov (United States)

    Vardy, J; Jenkins, P J; Clark, K; Chekroud, M; Begbie, K; Anthony, I; Rymaszewski, L A; Ireland, A J

    2014-06-13

    Collaboration between the orthopaedic and emergency medicine (ED) services has resulted in standardised treatment pathways, leaflet supported discharge and a virtual fracture clinic review. Patients with minor, stable fractures are discharged with no further follow-up arranged. We aimed to examine the time taken to assess and treat these patients in the ED along with the rate of unplanned reattendance. A retrospective study was undertaken that covered 1 year before the change and 1 year after. Prospectively collected administrative data from the electronic patient record system were analysed and compared before and after the change. An ED and orthopaedic unit, serving a population of 300 000, in a publicly funded health system. 2840 patients treated with referral to a traditional fracture clinic and 3374 patients managed according to the newly redesigned protocol. Time for assessment and treatment of patients with orthopaedic injuries not requiring immediate operative management, and 7-day unplanned reattendance. Where plaster backslabs were replaced with removable splints, the consultation time was reduced. There was no change in treatment time for other injuries treated by the new discharge protocol. There was no increase in unplanned ED attendance, related to the injury, within 7 days (p=0.149). There was a decrease in patients reattending the ED due to a missed fracture clinic appointment. This process did not require any new time resources from the ED staff. This process brought significant benefits to the ED as treatment pathways were agreed. The pathway reduced unnecessary reattendance of patients at face-to-face fracture clinics for a review of stable, self-limiting injuries. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  9. Profex: a graphical user interface for the Rietveld refinement program BGMN

    OpenAIRE

    Doebelin, Nicola; Kleeberg, Reinhard

    2015-01-01

    Profex is a graphical user interface for the Rietveld refinement program BGMN. Its interface focuses on preserving BGMN’s powerful and flexible scripting features by giving direct access to BGMN input files. Very efficient workflows for single or batch refinements are achieved by managing refinement control files and structure files, by providing dialogues and shortcuts for many operations, by performing operations in the background, and by providing import filters for CIF and XML crystal str...

  10. Process for refining hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Risenfeld, E H

    1924-11-26

    A process is disclosed for the refining of hydrocarbons or other mixtures through treatment in vapor form with metal catalysts, characterized by such metals being used as catalysts, which are obtained by reduction of the oxide of minerals containing the iron group, and by the vapors of the hydrocarbons, in the presence of the water vapor, being led over these catalysts at temperatures from 200 to 300/sup 0/C.

  11. Characterisation of nanoparticles by means of high-resolution SEM/EDS in transmission mode

    International Nuclear Information System (INIS)

    Hodoroaba, V-D; Rades, S; Mielke, J; Ortel, E; Salge, T; Schmidt, R

    2016-01-01

    Advances in scanning electron microscopy (SEM) enable the high-resolution imaging of single nanoparticles (NPs) with sizes well below 10 nm. The SEM analysis in transmission mode (T-SEM) of NPs on thin film supports has many benefits when compared to the analysis of NPs on bulk substrates. The enhanced material (mass - thickness) contrast of the T-SEM imaging mode is well suited for in-depth and, particularly valuable, to very accurate, traceable, lateral dimensional measurements of NPs. Compared to samples prepared on bulk substrates, T-SEM with energy dispersive X-ray spectroscopy (EDS) achieves a drastically improved spatial resolution of the emitted X-rays. The poor signal-to-noise ratio of the X-ray spectra emitted by a single nanoparticle (NP) can be improved by the use of high-sensitivity (high collection solid angle) silicon drift (SDD), energy-dispersive X-ray spectrometers (EDS). The EDS spectral imaging of a single NP with a spatial resolution below 10 nm has become possible. This is demonstrated by means of various examples of nanostructures. Advanced data processing of T-SEM/EDS results sets the stage for the automated classification of NPs by feature analysis. This method combines the detection of morphological structures of interest by image processing of T-SEM micrographs with the chemical classification by EDS. (paper)

  12. Investment in exploration-production and refining 2014

    International Nuclear Information System (INIS)

    Hureau, Geoffroy; Serbutoviez, Sylvain; Silva, Constancio; Maisonnier, Guy

    2014-11-01

    IFPEN analyses in this study the 2014 evolution of global investment in the field of exploration-production and refining: 1 - Changes in oil and gas prices: General background: weak economy and global disorder, Oil prices: fundamentals that could help to relax oil prices?, Gas prices: fall in Europe, stability in Japan, increase in the US; 2 - Exploration and production - Slowdown in growth: moderate rise in investment in 2014, exploration - Discoveries in 2014, Russia: sanctions will have limited short term impact, implications of the reforms to the Mexican energy sector; 3 - Drilling activity and market throughout the world: onshore and offshore drilling (Number of wells drilled throughout the world, Number of onshore wells, Number of offshore wells, Drilling, equipment and well services markets, Onshore drilling market, Offshore drilling market, Fracking market), Geophysical activity and the geophysical market, Offshore construction activity and the offshore construction market (Offshore construction activities, Rig construction activity, Floating Platform Systems (FPS), Sub-sea constructions, Offshore construction market); 4 - Refining - Significant increase in spending: increase in industrial costs, a slowdown in the increase in excess capacity in the future?, A bleak future for the european refining sector

  13. P-Refinement and P-Threads (Preprint)

    National Research Council Canada - National Science Library

    Dong, Steven; Karniadakis, George E

    2002-01-01

    ...]) in d dimensions, which is higher than lower-order methods. In this paper, we demonstrate that by employing multi-threading within MPI processes we manage to counter- balance the cost increase associated with P-refinement...

  14. Carcinogenicity of petroleum lubricating oil distillates: effects of solvent refining, hydroprocessing, and blending.

    Science.gov (United States)

    Halder, C A; Warne, T M; Little, R Q; Garvin, P J

    1984-01-01

    Certain refining processes were investigated to determine their influence on the dermal carcinogenic activity of petroleum-derived lubricating oil distillates. Specifically, the effects of solvent refining, hydroprocessing, a combination of both processes, and the blending of oils processed using each technique were evaluated in standard mouse skin-painting bioassays. The refining process used as well as the level or severity of treatment greatly influenced the carcinogenic outcome of processed lubricating oils. Solvent refining at severities normally used appeared to eliminate carcinogenicity. In contrast, hydroprocessing alone at mild levels of treatment was successful only in reducing the carcinogenic potency; severe hydroprocessing conditions were necessary to eliminate carcinogenic activity without the use of additional refining processes. Carcinogenic activity could also be eliminated by following moderate solvent refining with mild hydroprocessing. Blending of hydroprocessed oils with solvent-refined oils resulted in a substantial reduction or even elimination of carcinogenic activity. However, the degree of protection obtained varied with the particular distillates used and appeared largely dependent on the inherent biological activity of the hydroprocessed oil.

  15. Refining in the 1990's: Restructuring and resurgence

    International Nuclear Information System (INIS)

    Cobb, C.B.

    1994-01-01

    After two years of uncertainty in dealing with the 1990 Clean Air Act Amendments coupled with the shutdown of 5% of total US refining capacity, the industry is now positioning itself for continued operations throughout the remainder of the decade. However, refineries are experiencing a shift in the mode of operations to a period of more restructuring (closings, ventures, alliances, etc.) followed by a resurgence in financial performance. The purpose of this paper is to examine the current industry and highlight the reasons for industry's current plans. The authors also speculate about the strategies companies will choose to better their financial performance. Fundamentally, the characteristics of a mature domestic business remain the driving force that shape decision making. In responding to the maturing of refining, the authors suggest that refiners will change the way they conduct business over the next few years. Building on the theme of the 1993 NPRA paper, strategies will target the domestic side of the business while simultaneously shifting to a global perspective

  16. Refining SCJ Mission Specifications into Parallel Handler Designs

    Directory of Open Access Journals (Sweden)

    Frank Zeyda

    2013-05-01

    Full Text Available Safety-Critical Java (SCJ is a recent technology that restricts the execution and memory model of Java in such a way that applications can be statically analysed and certified for their real-time properties and safe use of memory. Our interest is in the development of comprehensive and sound techniques for the formal specification, refinement, design, and implementation of SCJ programs, using a correct-by-construction approach. As part of this work, we present here an account of laws and patterns that are of general use for the refinement of SCJ mission specifications into designs of parallel handlers used in the SCJ programming paradigm. Our notation is a combination of languages from the Circus family, supporting state-rich reactive models with the addition of class objects and real-time properties. Our work is a first step to elicit laws of programming for SCJ and fits into a refinement strategy that we have developed previously to derive SCJ programs.

  17. Assume-Guarantee Abstraction Refinement Meets Hybrid Systems

    Science.gov (United States)

    Bogomolov, Sergiy; Frehse, Goran; Greitschus, Marius; Grosu, Radu; Pasareanu, Corina S.; Podelski, Andreas; Strump, Thomas

    2014-01-01

    Compositional verification techniques in the assume- guarantee style have been successfully applied to transition systems to efficiently reduce the search space by leveraging the compositional nature of the systems under consideration. We adapt these techniques to the domain of hybrid systems with affine dynamics. To build assumptions we introduce an abstraction based on location merging. We integrate the assume-guarantee style analysis with automatic abstraction refinement. We have implemented our approach in the symbolic hybrid model checker SpaceEx. The evaluation shows its practical potential. To the best of our knowledge, this is the first work combining assume-guarantee reasoning with automatic abstraction-refinement in the context of hybrid automata.

  18. India beckons participants in burgeoning refining sector

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that India has opened its refining sector to full private investment for the first time in more than 2 decades. The government again gave a green light to construction of three 120,000 b/d grassroots refineries in East, West, and Central India. The projects had won various governmental approvals in the past few years, but never moved off high center for a variety of economic and regulatory reasons. The difference this time is that the government is offering interests in the projects to private foreign and domestic investors. It's part of India's push to boost overall refining capacity by more than 80% this century

  19. Macromolecular refinement by model morphing using non-atomic parameterizations.

    Science.gov (United States)

    Cowtan, Kevin; Agirre, Jon

    2018-02-01

    Refinement is a critical step in the determination of a model which explains the crystallographic observations and thus best accounts for the missing phase components. The scattering density is usually described in terms of atomic parameters; however, in macromolecular crystallography the resolution of the data is generally insufficient to determine the values of these parameters for individual atoms. Stereochemical and geometric restraints are used to provide additional information, but produce interrelationships between parameters which slow convergence, resulting in longer refinement times. An alternative approach is proposed in which parameters are not attached to atoms, but to regions of the electron-density map. These parameters can move the density or change the local temperature factor to better explain the structure factors. Varying the size of the region which determines the parameters at a particular position in the map allows the method to be applied at different resolutions without the use of restraints. Potential applications include initial refinement of molecular-replacement models with domain motions, and potentially the use of electron density from other sources such as electron cryo-microscopy (cryo-EM) as the refinement model.

  20. Barriers and Facilitators to Implementing the HEADS-ED: A Rapid Screening Tool for Pediatric Patients in Emergency Departments.

    Science.gov (United States)

    MacWilliams, Kate; Curran, Janet; Racek, Jakub; Cloutier, Paula; Cappelli, Mario

    2017-12-01

    This study sought to identify barriers and facilitators to the implementation of the HEADS-ED, a screening tool appropriate for use in the emergency department (ED) that facilitates standardized assessments, discharge planning, charting, and linking pediatric mental health patients to appropriate community resources. A qualitative theory-based design was used to identify barriers and facilitators to implementing the HEADS-ED tool. Focus groups were conducted with participants recruited from 6 different ED settings across 2 provinces (Ontario and Nova Scotia). The Theoretical Domains Framework was used as a conceptual framework to guide data collection and to identify themes from focus group discussions. The following themes spanning 12 domains were identified as reflective of participants' beliefs about the barriers and facilitators to implementing the HEADS-ED tool: knowledge, skills, beliefs about capabilities, social professional role and identity, optimism, beliefs about consequences, reinforcement, environmental context and resources, social influences, emotion, behavioral regulation and memory, and attention and decision process. The HEADS-ED has the potential to address the need for better discharge planning, complete charting, and standardized assessments for the increasing population of pediatric mental health patients who present to EDs. This study has identified potential barriers and facilitators, which should be considered when developing an implementation plan for adopting the HEADS-ED tool into practice within EDs.

  1. Horn clause verification with convex polyhedral abstraction and tree automata-based refinement

    DEFF Research Database (Denmark)

    Kafle, Bishoksan; Gallagher, John Patrick

    2017-01-01

    In this paper we apply tree-automata techniques to refinement of abstract interpretation in Horn clause verification. We go beyond previous work on refining trace abstractions; firstly we handle tree automata rather than string automata and thereby can capture traces in any Horn clause derivations...... underlying the Horn clauses. Experiments using linear constraint problems and the abstract domain of convex polyhedra show that the refinement technique is practical and that iteration of abstract interpretation with tree automata-based refinement solves many challenging Horn clause verification problems. We...... compare the results with other state-of-the-art Horn clause verification tools....

  2. Refining capacity in Quebec : the Quebec market, industry viewpoint

    International Nuclear Information System (INIS)

    Trudelle, F.

    2004-01-01

    Canada's second largest oil refinery is operated by Ultramar Ltd. in Levis, Quebec. The refinery, which supplies 45 per cent of all Quebec's petroleum, distributes its products to Quebec, Ontario and the Maritime provinces. The refinery currently produces 215,000 barrels per day. Ultramar is a division of Valero, an American firm which has a total refining capacity of 2.4 million barrels per day. A summary of the company's petroleum energy distribution, consumption, and reserves was presented and compared with the national and global position. It was noted that world demand for petroleum products increases yearly by 1 to 1.5 per cent while the demand for automobile fuel in North America increases by 2.5 to 3.5 per cent. In the last 10 years, world demand has increased by more than 22 per cent but refining capacity has only increased by 12 per cent. The average profitability of the refining industry from 1992 to 2002 was approximately 5.5 per cent, which limited investments in new refinery installations. Much of the industry's profits have been utilized to modify installations in order to reduce the sulphur content in gasoline and diesel fuels. Furthermore, the obtention of permits to construct new refining installations has become a major obstacle and the ratification of the Kyoto Protocol may signify a 30 per cent reduction in automotive fuel demand. Given this, there is currently some hesitation and uncertainty by the refining industry to proceed with new major installations. tabs., figs

  3. Improvement in Student Science Proficiency Through InSciEd Out

    Science.gov (United States)

    Sonju, James D.; Leicester, Jean E.; Hoody, Maggie; LaBounty, Thomas J.; Frimannsdottir, Katrin R.; Ekker, Stephen C.

    2012-01-01

    Abstract Integrated Science Education Outreach (InSciEd Out) is a collaboration formed between Mayo Clinic, Winona State University, and Rochester Public Schools (MN) with the shared vision of achieving excellence in science education. InSciEd Out employs an equitable partnership model between scientists, teachers, education researchers, and the community. Teams of teachers from all disciplines within a single school experience cutting-edge science using the zebrafish model system, as well as current pedagogical methods, during a summer internship at the Mayo Clinic. Within the internship, the teachers produce new curriculum that directly addresses opportunities for science education improvement at their own school. Zebrafish are introduced within the new curriculum to support a living model of the practice of science. Following partnership with the InSciEd Out program and 2 years of implementation in the classroom, teacher-interns from a K–8 public school reported access to local scientific technology and expertise they had not previously recognized. Teachers also reported improved integration of other disciplines into the scientific curriculum and a flow of concepts vertically from K through 8. Students more than doubled selection of an Honors science track in high school to nearly 90%. 98% of students who took the Minnesota Comprehensive Assessments in their 5th and 8th grade year (a span that includes 2 years of InSciEd Out) showed medium or high growth in science proficiency. These metrics indicate that cooperation between educators and scientists can result in positive change in student science proficiency and demonstrate that a higher expectation in science education can be achieved in US public schools. PMID:23244687

  4. Ekspert : "Väed Afganistanist välja!" / Aadu Hiietamm

    Index Scriptorium Estoniae

    Hiietamm, Aadu, 1954-

    2007-01-01

    Saksa kriisiekspert Peter Scholl-Latour on seisukohal, et välisväed peavad Afganistanist lahkuma, sest seni pole keegi suutnud seal sõda võita. P. Scholl-Latouri artiklist poliitikaajakirjas Cicero

  5. Low-carbon-oriented dynamic optimization of residential energy pricing in China

    International Nuclear Information System (INIS)

    He, Yongxiu; Liu, Yangyang; Wang, Jianhui; Xia, Tian; Zhao, Yushan

    2014-01-01

    In China, the energy pricing mechanism has an insufficient linkage with other energy prices. As a result of the unreasonable price level, it is impossible to exploit fully the substitution elasticity among energy resources and there is a negative impact on achieving energy conservation and energy efficiency. This paper proposes an optimized mechanism for residential energy prices in China, which maximizes the total social surplus subject to some related constraints. Three types of energy pricing mechanisms are designed based on China's low-carbon targets and the optimization of residential energy price policies through the dynamic CGE model. Compared with the energy price linkage method, the results show that the market netback value mechanism has a greater impact on the total social surplus. In order to achieve further low-carbon targets, the proportion of second and third tier residents can be expanded, while the energy prices could be deregulated to some degree. In addition, considering residential affordability, the government may take into account different electricity pricing mechanisms for different tiers of residents. Electricity pricing for the first tier, the second tier and the third tier should be based respectively on cost, the integration of energy price linkage and the market netback value mechanism. - Highlights: • Residential energy price mechanisms can be considered in the D-CGE model. • The maximization of total social surplus is the optimized objective. • The market netback value mechanism has a greater impact on the total social surplus. • Production cost and energy price conduction should be considered in price mechanisms. • Government should take the energy system as a whole to optimize energy prices

  6. Nucleation mechanisms of refined alpha microstructure in beta titanium alloys

    Science.gov (United States)

    Zheng, Yufeng

    Due to a great combination of physical and mechanical properties, beta titanium alloys have become promising candidates in the field of chemical industry, aerospace and biomedical materials. The microstructure of beta titanium alloys is the governing factor that determines their properties and performances, especially the size scale, distribution and volume fraction of precipitate phase in parent phase matrix. Therefore in order to enhance the performance of beta titanium alloys, it is critical to obtain a thorough understanding of microstructural evolution in beta titanium alloys upon various thermal and/or mechanical processes. The present work is focusing on the study of nucleation mechanisms of refined alpha microstructure and super-refined alpha microstructure in beta titanium alloys in order to study the influence of instabilities within parent phase matrix on precipitates nucleation, including compositional instabilities and/or structural instabilities. The current study is primarily conducted in Ti-5Al-5Mo-5V-3Cr (wt%, Ti-5553), a commercial material for aerospace application. Refined and super-refined precipitates microstructure in Ti-5553 are obtained under specific accurate temperature controlled heat treatments. The characteristics of either microstructure are investigated in details using various characterization techniques, such as SEM, TEM, STEM, HRSTEM and 3D atom probe to describe the features of microstructure in the aspect of morphology, distribution, structure and composition. Nucleation mechanisms of refined and super-refined precipitates are proposed in order to fully explain the features of different precipitates microstructure in Ti-5553. The necessary thermodynamic conditions and detailed process of phase transformations are introduced. In order to verify the reliability of proposed nucleation mechanisms, thermodynamic calculation and phase field modeling simulation are accomplished using the database of simple binary Ti-Mo system

  7. Refining mineral oils

    Energy Technology Data Exchange (ETDEWEB)

    1946-07-05

    A process is described refining raw oils such as mineral oils, shale oils, tar, their fractions and derivatives, by extraction with a selected solvent or a mixture of solvents containing water, forming a solvent more favorable for the hydrocarbons poor in hydrogen than for hydrocarbons rich in hydrogen, this process is characterized by the addition of an aiding solvent for the water which can be mixed or dissolved in the water and the solvent or in the dissolving mixture and increasing in this way the solubility of the water in the solvent or the dissolving mixture.

  8. Effect of Job Specialization on the Hospital Stay and Job Satisfaction of ED Nurses.

    Science.gov (United States)

    Shamsi, Vahid; Mahmoudi, Hosein; Sirati Nir, Masoud; Babatabar Darzi, Hosein

    2016-02-01

    In recent decades, the increasing crowdedness of the emergency departments has posed various problems for patients and healthcare systems worldwide. These problems include prolonged hospital stay, patient dissatisfaction and nurse burnout or job dissatisfaction. The aim of this study was to investigate the effect of emergency department (ED) nurses' job specialization on their job satisfaction and the length of patient stay in the ED. This before-after quasi-experimental study was conducted from April to May 2014 at the Baqiyatallah Hospital, Tehran, Iran. Initially, 35 patients were recruited as controls and the length of their stay in the ED was measured in minutes via a chronometer; Moreover, nurses' job satisfaction was evaluated using the Mohrman-Cooke-Mohrman job satisfaction scale. Then, a job specialization intervention was developed based on the stabilization model. After that, 35 new patients were recruited to the treatment group and received specialized care services. Accordingly, the length of their stay in the ED was measured. Moreover, the same nurses' job satisfaction was re-evaluated after the study. The study intervention lasted one month. Data were analyzed using the SPSS software version 20 and statistical tests such as the Kolmogrov-Smirnov, the paired and the independent t, and chi-square tests. There was a significant difference between the two groups of patients concerning the length of their stay in the ED (P nurses had greater job satisfaction after the study (P job specialization intervention can improve nurses' satisfaction and relieve the crowdedness of the EDs.

  9. Barriers and facilitators to ED physician use of the test and treatment for BPPV.

    Science.gov (United States)

    Kerber, Kevin A; Forman, Jane; Damschroder, Laura; Telian, Steven A; Fagerlin, Angela; Johnson, Patricia; Brown, Devin L; An, Lawrence C; Morgenstern, Lewis B; Meurer, William J

    2017-06-01

    The test and treatment for benign paroxysmal positional vertigo (BPPV) are evidence-based practices supported by clinical guideline statements. Yet these practices are underutilized in the emergency department (ED) and interventions to promote their use are needed. To inform the development of an intervention, we interviewed ED physicians to explore barriers and facilitators to the current use of the Dix-Hallpike test (DHT) and the canalith repositioning maneuver (CRM). We conducted semi-structured in-person interviews with ED physicians who were recruited at annual ED society meetings in the United States. We analyzed data thematically using qualitative content analysis methods. Based on 50 interviews with ED physicians, barriers that contributed to infrequent use of DHT/CRM that emerged were (1) prior negative experiences or forgetting how to perform them and (2) reliance on the history of present illness to identify BPPV, or using the DHT but misattributing patterns of nystagmus. Based on participants' responses, the principal facilitator of DHT/CRM use was prior positive experiences using these, even if infrequent. When asked which clinical supports would facilitate more frequent use of DHT/CRM, participants agreed supports needed to be brief, readily accessible, and easy to use, and to include well-annotated video examples. Interventions to promote the use of the DHT/CRM in the ED need to overcome prior negative experiences with the DHT/CRM, overreliance on the history of present illness, and the underuse and misattribution of patterns of nystagmus. Future resources need to be sensitive to provider preferences for succinct information and video examples.

  10. Assessing food allergy risks from residual peanut protein in highly refined vegetable oil

    NARCIS (Netherlands)

    Blom, W.M.; Kruizinga, A.G.; Rubingh, C.M.; Remington, B.C.; Crevel, R.W.R.; Houben, G.F.

    2017-01-01

    Refined vegetable oils including refined peanut oil are widely used in foods. Due to shared production processes, refined non-peanut vegetable oils can contain residual peanut proteins. We estimated the predicted number of allergic reactions to residual peanut proteins using probabilistic risk

  11. Developing a multidisciplinary approach within the ED towards domestic violence presentations.

    Science.gov (United States)

    Basu, Subhashis; Ratcliffe, Giles

    2014-03-01

    To improve the detection and quality of care of patients who attend the emergency department (ED) with confirmed or suspected domestic abuse (DA). A quality improvement report on the design, implementation and evaluation of a specialised service and structured training programme to detect and manage DA presentations within an emergency medicine department. The study was set in the ED at the Northern General Hospital, Sheffield, UK. Key measures for improvement included introducing a service within the ED to help staff manage DA and coordinate responses; improve staff confidence in detecting DA; develop a structured and consistent process by which to manage DA presentations. An Independent Domestic Violence Advocate service was introduced into the department in July 2011 through a multiagency agreement. A structured training and education programme was delivered to ED staff. A 'communications form' was developed for DA risk assessment and case management. The process was reviewed quarterly. One hundred and seventy-two referrals were made to the service (121 distinct clients) over a 12-month period. Staff reported greater confidence in detecting DA, and community partners highlighted the role the service had in improving DA detection and care quality within the city. Strong leadership and prioritising the issue within the department has facilitated the development of the process and contributed substantially to its success. Support from community partners has been invaluable in tailoring the service and education programme to the needs of staff and patients within the department.

  12. Solving the worldwide emergency department crowding problem - what can we learn from an Israeli ED?

    Science.gov (United States)

    Pines, Jesse M; Bernstein, Steven L

    2015-01-01

    ED crowding is a prevalent and important issue facing hospitals in Israel and around the world, including North and South America, Europe, Australia, Asia and Africa. ED crowding is associated with poorer quality of care and poorer health outcomes, along with extended waits for care. Crowding is caused by a periodic mismatch between the supply of ED and hospital resources and the demand for patient care. In a recent article in the Israel Journal of Health Policy Research, Bashkin et al. present an Ishikawa diagram describing several factors related to longer length of stay (LOS), and higher levels of ED crowding, including management, process, environmental, human factors, and resource issues. Several solutions exist to reduce ED crowding, which involve addressing several of the issues identified by Bashkin et al. This includes reducing the demand for and variation in care, and better matching the supply of resources to demands in care in real time. However, what is needed to reduce crowding is an institutional imperative from senior leadership, implemented by engaged ED and hospital leadership with multi-disciplinary cross-unit collaboration, sufficient resources to implement effective interventions, access to data, and a sustained commitment over time. This may move the culture of a hospital to facilitate improved flow within and across units and ultimately improve quality and safety over the long-term.

  13. Taiwan: refined need for consuming population

    International Nuclear Information System (INIS)

    Hayes, David.

    1995-01-01

    A brief discussion is given of the oil and gas industry in Taiwan. Topics covered include the possibility of privatization, refineries and refining contracts overseas, plans for a new petrochemical complex and an offshore submarine transmission pipeline. (UK)

  14. Effect of some grain refiners on the mechanical properties of aluminum

    International Nuclear Information System (INIS)

    Zaid, A.I.O.

    2001-01-01

    It is well established that aluminum and its alloys are grain refined by some refractory metals to enhance their surface qualities and mechanical strengths. In this paper, the literature on grain refining, and its mechanism is reviewed and discussed. Also, the effect of grain refining of commercially pure aluminum by the addition of titanium, boron, vanadium, molybdenum, and zirconium is investigated. The effect of each of these elements on grain size, hardness and mechanical behavior is presented and discussed. It was found that the addition of any of these elements except zirconium resulted in enhancement of grain size, hardness and mechanical strength. An increase of 2.1 % in flow stress of Al grain refined by Ti+B was achieved by addition of 0.1 % V at 0.2 strain. (author)

  15. Refined 3d-3d correspondence

    Energy Technology Data Exchange (ETDEWEB)

    Alday, Luis F.; Genolini, Pietro Benetti; Bullimore, Mathew; Loon, Mark van [Mathematical Institute, University of Oxford, Andrew Wiles Building,Radcliffe Observatory Quarter, Woodstock Road, Oxford, OX2 6GG (United Kingdom)

    2017-04-28

    We explore aspects of the correspondence between Seifert 3-manifolds and 3d N=2 supersymmetric theories with a distinguished abelian flavour symmetry. We give a prescription for computing the squashed three-sphere partition functions of such 3d N=2 theories constructed from boundary conditions and interfaces in a 4d N=2{sup ∗} theory, mirroring the construction of Seifert manifold invariants via Dehn surgery. This is extended to include links in the Seifert manifold by the insertion of supersymmetric Wilson-’t Hooft loops in the 4d N=2{sup ∗} theory. In the presence of a mass parameter for the distinguished flavour symmetry, we recover aspects of refined Chern-Simons theory with complex gauge group, and in particular construct an analytic continuation of the S-matrix of refined Chern-Simons theory.

  16. Using atomic energy in the oil refining and petrochemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Feigin, E.A.; Barashkov, R.Ia.; Raud, E.A.

    1982-01-01

    A short description of the basic large scale processes for oil refining and petrochemistry in which nuclear reactors can be used is given. The possible industrial plans for using nuclear reactors are examined together with the problems in using the advances in atomic technology in oil refining and petrochemical processes.

  17. Repetitive Identification of Structural Systems Using a Nonlinear Model Parameter Refinement Approach

    Directory of Open Access Journals (Sweden)

    Jeng-Wen Lin

    2009-01-01

    Full Text Available This paper proposes a statistical confidence interval based nonlinear model parameter refinement approach for the health monitoring of structural systems subjected to seismic excitations. The developed model refinement approach uses the 95% confidence interval of the estimated structural parameters to determine their statistical significance in a least-squares regression setting. When the parameters' confidence interval covers the zero value, it is statistically sustainable to truncate such parameters. The remaining parameters will repetitively undergo such parameter sifting process for model refinement until all the parameters' statistical significance cannot be further improved. This newly developed model refinement approach is implemented for the series models of multivariable polynomial expansions: the linear, the Taylor series, and the power series model, leading to a more accurate identification as well as a more controllable design for system vibration control. Because the statistical regression based model refinement approach is intrinsically used to process a “batch” of data and obtain an ensemble average estimation such as the structural stiffness, the Kalman filter and one of its extended versions is introduced to the refined power series model for structural health monitoring.

  18. Refining borders of genome-rearrangements including repetitions

    Directory of Open Access Journals (Sweden)

    JA Arjona-Medina

    2016-10-01

    Full Text Available Abstract Background DNA rearrangement events have been widely studied in comparative genomic for many years. The importance of these events resides not only in the study about relatedness among different species, but also to determine the mechanisms behind evolution. Although there are many methods to identify genome-rearrangements (GR, the refinement of their borders has become a huge challenge. Until now no accepted method exists to achieve accurate fine-tuning: i.e. the notion of breakpoint (BP is still an open issue, and despite repeated regions are vital to understand evolution they are not taken into account in most of the GR detection and refinement methods. Methods and results We propose a method to refine the borders of GR including repeated regions. Instead of removing these repetitions to facilitate computation, we take advantage of them using a consensus alignment sequence of the repeated region in between two blocks. Using the concept of identity vectors for Synteny Blocks (SB and repetitions, a Finite State Machine is designed to detect transition points in the difference between such vectors. The method does not force the BP to be a region or a point but depends on the alignment transitions within the SBs and repetitions. Conclusion The accurate definition of the borders of SB and repeated genomic regions and consequently the detection of BP might help to understand the evolutionary model of species. In this manuscript we present a new proposal for such a refinement. Features of the SBs borders and BPs are different and fit with what is expected. SBs with more diversity in annotations and BPs short and richer in DNA replication and stress response, which are strongly linked with rearrangements.

  19. Safe Handling of Snakes in an ED Setting.

    Science.gov (United States)

    Cockrell, Melanie; Swanson, Kristofer; Sanders, April; Prater, Samuel; von Wenckstern, Toni; Mick, JoAnn

    2017-01-01

    Efforts to improve consistency in management of snakes and venomous snake bites in the emergency department (ED) can improve patient and staff safety and outcomes, as well as improve surveillance data accuracy. The emergency department at a large academic medical center identified an opportunity to implement a standardized process for snake disposal and identification to reduce staff risk exposure to snake venom from snakes patients brought with them to the ED. A local snake consultation vendor and zoo Herpetologist assisted with development of a process for snake identification and disposal. All snakes have been identified and securely disposed of using the newly implemented process and no safety incidents have been reported. Other emergency department settings may consider developing a standardized process for snake disposal using listed specialized consultants combined with local resources and suppliers to promote employee and patient safety. Copyright © 2017 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

  20. Grain refinement of AZ31 by (SiC)P: Theoretical calculation and experiment

    International Nuclear Information System (INIS)

    Guenther, R.; Hartig, Ch.; Bormann, R.

    2006-01-01

    Grain refinement of gravity die-cast Mg-alloys can be achieved via two methods: in situ refinement by primary precipitated metallic or intermetallic phases, and inoculation of the melt via ceramic particles that remain stable in the melt due to their high thermodynamic stability. In order to clarify grain refinement mechanisms and optimize possible potent refiners in Mg-alloys, a simulation method for heterogeneous nucleation based on a free growth model has been developed. It allows the prediction of the grain size as a function of the particle size distribution, the volumetric content of ceramic inoculants, the cooling rate and the alloy constitution. The model assumptions were examined experimentally by a study of the grain refinement of (SiC) P in AZ31. Additions of (SiC) P result in significant grain refinement, if appropriate parameters for ceramic particles are chosen. The model makes quantitatively correct predictions for the grain size and its variation with cooling rate

  1. Process for refining shale bitumen

    Energy Technology Data Exchange (ETDEWEB)

    Plauson, H

    1920-09-19

    A process is disclosed for refining shale bitumen for use as heavy mineral oil, characterized by mixtures of blown hard shale pitch and heavy mineral oil being blown with hot air at temperatures of 120 to 150/sup 0/ with 1 to 3 percent sulfur, and if necessary with 0.5 to 3 percent of an aldehyde.

  2. Multigrid for refined triangle meshes

    Energy Technology Data Exchange (ETDEWEB)

    Shapira, Yair

    1997-02-01

    A two-level preconditioning method for the solution of (locally) refined finite element schemes using triangle meshes is introduced. In the isotropic SPD case, it is shown that the condition number of the preconditioned stiffness matrix is bounded uniformly for all sufficiently regular triangulations. This is also verified numerically for an isotropic diffusion problem with highly discontinuous coefficients.

  3. Unit-cell refinement from powder diffraction scans

    International Nuclear Information System (INIS)

    Pawley, G.S.

    1981-01-01

    A procedure for the refinement of the crystal unit cell from a powder diffraction scan is presented. In this procedure knowledge of the crystal structure is not required, and at the end of the refinement a list of indexed intensities is produced. This list may well be usable as the starting point for the application of direct methods. The problems of least-squares ill-conditioning due to overlapping reflections are overcome by constraints. An example using decafluorocyclohexene, C 6 F 10 , shows the quality of fit obtained in a case which may even be a false minimum. The method should become more relevant as powder scans of improved resolution become available, through the use of pulsed neutron sources. (Auth.)

  4. Refining crude oils and gasolines, etc

    Energy Technology Data Exchange (ETDEWEB)

    1931-11-23

    A process of refining crude oils and gasolines distilled from shale and the like is described, consisting of submitting them to a prewash with soda, an oxidation preferably with hypochlorite solution, a hydrogenation with nascent hydrogen, and finally rectification and neutralization.

  5. A conformation-dependent stereochemical library improves crystallographic refinement even at atomic resolution

    International Nuclear Information System (INIS)

    Tronrud, Dale E.; Karplus, P. Andrew

    2011-01-01

    A script was created to allow SHELXL to use the new CDL v.1.2 stereochemical library which defines the target values for main-chain bond lengths and angles as a function of the residue’s ϕ/ψ angles. Test refinements using this script show that the refinement behavior of structures at resolutions even better than 1 Å is substantially enhanced by the use of the new conformation-dependent ideal geometry paradigm. To utilize a new conformation-dependent backbone-geometry library (CDL) in protein refinements at atomic resolution, a script was written that creates a restraint file for the SHELXL refinement program. It was found that the use of this library allows models to be created that have a substantially better fit to main-chain bond angles and lengths without degrading their fit to the X-ray data even at resolutions near 1 Å. For models at much higher resolution (∼0.7 Å), the refined model for parts adopting single well occupied positions is largely independent of the restraints used, but these structures still showed much smaller r.m.s.d. residuals when assessed with the CDL. Examination of the refinement tests across a wide resolution range from 2.4 to 0.65 Å revealed consistent behavior supporting the use of the CDL as a next-generation restraint library to improve refinement. CDL restraints can be generated using the service at http://pgd.science.oregonstate.edu/cdl_shelxl/

  6. Refining mass formulas for astrophysical applications: A Bayesian neural network approach

    Science.gov (United States)

    Utama, R.; Piekarewicz, J.

    2017-10-01

    Background: Exotic nuclei, particularly those near the drip lines, are at the core of one of the fundamental questions driving nuclear structure and astrophysics today: What are the limits of nuclear binding? Exotic nuclei play a critical role in both informing theoretical models as well as in our understanding of the origin of the heavy elements. Purpose: Our aim is to refine existing mass models through the training of an artificial neural network that will mitigate the large model discrepancies far away from stability. Methods: The basic paradigm of our two-pronged approach is an existing mass model that captures as much as possible of the underlying physics followed by the implementation of a Bayesian neural network (BNN) refinement to account for the missing physics. Bayesian inference is employed to determine the parameters of the neural network so that model predictions may be accompanied by theoretical uncertainties. Results: Despite the undeniable quality of the mass models adopted in this work, we observe a significant improvement (of about 40%) after the BNN refinement is implemented. Indeed, in the specific case of the Duflo-Zuker mass formula, we find that the rms deviation relative to experiment is reduced from σrms=0.503 MeV to σrms=0.286 MeV. These newly refined mass tables are used to map the neutron drip lines (or rather "drip bands") and to study a few critical r -process nuclei. Conclusions: The BNN approach is highly successful in refining the predictions of existing mass models. In particular, the large discrepancy displayed by the original "bare" models in regions where experimental data are unavailable is considerably quenched after the BNN refinement. This lends credence to our approach and has motivated us to publish refined mass tables that we trust will be helpful for future astrophysical applications.

  7. A Canadian refiner's perspective of synthetic crudes

    International Nuclear Information System (INIS)

    Halford, T.L.; McIntosh, A.P.; Rasmussen

    1997-01-01

    Some of the factors affecting a refiner's choice of crude oil include refinery hardware, particularly gas oil crackers, products slate and product specifications, crude availability, relative crude price and crude quality. An overview of synthetic crude, the use of synthetic crude combined with other crudes and a comparison of synthetic crude with conventional crude oil was given. The two main users of synthetic crude are basically two groups of refiners, those large groups who use synthetic crude combined with other crudes, and a smaller group who run synthetic crude on specially designed units as a sole feed. The effects of changes in fuel legislation were reviewed. It was predicted that the changes will have a mixed impact on the value of synthetic crude, but low sulphur diesel regulations and gasoline sulphur regulations will make current synthetic crudes attractive. The big future change with a negative impact will be diesel cetane increases to reduce engine emissions. This will reduce synthetic crude attractiveness due to distillate yields and quality and high gas oil yields. Similarly, any legislation limiting aromatics in diesel fuel will also make synthetic crudes less attractive. Problems experienced by refiners with hardware dedicated to synthetic crude (salt, naphthenic acid, fouling, quality variations) were also reviewed. 3 tabs

  8. The Generation of AlmFe in Dilute Aluminium Alloys with Different Grain Refining Additions

    Science.gov (United States)

    Meredith, M. W.; Greer, A. L.; Evans, P. V.; Hamerton, R. G.

    Al13Fe4, Al6Fe and AlmFe are common intermetallics in commercial AA1XXX series Al alloys. Grain-refining additions (based on either Al-Ti-B or Al-Ti-C) are usually added to such alloys during solidification processing to aid the grain structure development. They also influence the favoured intermetallic and, hence, can affect the materials' properties. This work simulates commercial casting practices in an attempt to determine the mechanisms by which one intermetallic phase is favoured over another by the introduction of grain-refining additions. Directional solidification experiments on Al-0.3wt.%Fe-0.15wt.%Si with and without grain refiner are conducted using Bridgman apparatus. The type, amount and effectiveness of the grain-refining additions are altered and the resulting intermetallic phase selection followed. The materials are characterised using optical microscopy, scanning electron microscopy and X-ray diffraction. AlmFe is seen to form when Al-Ti-B grain-refiner is introduced but only when the refinement is successful; reducing the effectiveness of the refiner led to Al6Fe forming under all conditions. Al-Ti-C refiners are seen to promote AlmFe at lower solidification velocities than when Al-Ti-B was used even though the grain structure was not as refined. These trends can be explained within existing eutectic theory, by considering growth undercooling.

  9. A Successful ED Fall Risk Program Using the KINDER 1 Fall RiskAssessment Tool.

    Science.gov (United States)

    Townsend, Ann B; Valle-Ortiz, Marisol; Sansweet, Tracy

    2016-11-01

    Emergency nurses did not perform falls risk assessments routinely on our ED patients; the instrument used was aimed at inpatients. We identified a need to revise fall assessment practices specific to our emergency department. The purpose of the performance improvement project was to reduce ED falls and evaluate the use of an ED-specific fall risk tool, the KINDER 1 Fall Risk Assessment. The plan was to establish fall risk assessment practices at point of ED entry and to decrease total falls. We retrospectively reviewed ED fall data for each quarter of 2013, which included risk assessments scores, the total number of falls, and the circumstances of each fall. Using Kotter's framework to guide a successful change process, we implemented the KINDER 1 to assess fall risk. During the first 4 weeks of the project, 937 patients (27%) were identified as high risk for falls using the KINDER 1. During the subsequent 3 quarters, the total number of falls decreased; reported falls without injuries dropped from 0.21 to 0.07 per 1000 patients, and falls with injuries were reduced from 0.21 to 0.0 per 1000 patients. The results of this project represented a valuable step toward achieving our goal to keep ED patients safe from injuries as a result of falls. The findings add to the body of nursing knowledge on the application of clinical-based performance improvement projects to improve patient outcomes and to provide data on the use of the KINDER 1 tool, which has not been extensively tested. Copyright © 2016 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

  10. Test Review: Gilliam, J. E. (2015), "Attention-Deficit/Hyperactivity Disorder Test" (2nd Ed) [Assessment Instrument]. Austin, TX: Pro-Ed.

    Science.gov (United States)

    Perdue, Elizabeth A.

    2016-01-01

    The "Attention-Deficit/Hyperactivity Disorder Test-Second Edition" (ADHDT-2) is published through Pro-Ed in Austin, Texas. It was formally published in 2014, following critical revisions of the ADHDT, the reportedly popular initial version of this test that was published in 1995. The ADHDT-2 purports to act as a screener for individuals…

  11. Grain Refinement of Commercial EC Grade 1070 Aluminium Alloy for Electrical Application

    OpenAIRE

    Hassanabadi, Massoud

    2015-01-01

    The aluminium alloys for electrical conductivity applications are generally not grain refinedsince the addition of grain refiners drops the electrical conductivity by introducing impuritiesinto the melt. Non-grain refined aluminium may lead to bar fracture and cracks during themetalworking process. The present study focuses to find an optimum balance between the grain refiner addition andthe electrical conductivity of commercial EC grade 1070 aluminium alloy for electricalapplication. In orde...

  12. Refined Fuchs inequalities for systems of linear differential equations

    International Nuclear Information System (INIS)

    Gontsov, R R

    2004-01-01

    We refine the Fuchs inequalities obtained by Corel for systems of linear meromorphic differential equations given on the Riemann sphere. Fuchs inequalities enable one to estimate the sum of exponents of the system over all its singular points. We refine these well-known inequalities by considering the Jordan structure of the leading coefficient of the Laurent series for the matrix of the right-hand side of the system in the neighbourhood of a singular point

  13. Rising costs call for new European refining strategies

    International Nuclear Information System (INIS)

    Sweeney, B.N.C.

    1993-01-01

    The outlook for the global refining industry is for increased spending and reduced margins, largely because of efforts to improve the environment. A look at these trends through the end of the decade is thus in order. Three major industry thrusts are proposed to see refiners through this uncertain period. Three main thrusts are necessary: fixed costs must be reduced by re-engineering business processes and reexamining noncore business units against total and marginal costs. In this respect the best refiners are well ahead of the good ones. New cooperative ways of meeting regulations must be sought, to avoid wasteful over capacity. Joint ventures and alliances with competitors will be needed. The cooperative principle upstream must be extended and new strategies must be sought to meet product demand changes and reduce feedstock costs. The picture that is presented is tough, largely because of the wish to improve the environment. The question that must be continually reviewed is ''Have governments got the right balance in these regulations between the environment and the downstream industry?''

  14. Improved Early Detection of Sepsis in the ED With a Novel Monocyte Distribution Width Biomarker.

    Science.gov (United States)

    Crouser, Elliott D; Parrillo, Joseph E; Seymour, Christopher; Angus, Derek C; Bicking, Keri; Tejidor, Liliana; Magari, Robert; Careaga, Diana; Williams, JoAnna; Closser, Douglas R; Samoszuk, Michael; Herren, Luke; Robart, Emily; Chaves, Fernando

    2017-09-01

    Sepsis most often presents to the ED, and delayed detection is harmful. WBC count is often used to detect sepsis, but changes in WBC count size also correspond to sepsis. We sought to determine if volume increases of circulating immune cells add value to the WBC count for early sepsis detection in the ED. A blinded, prospective cohort study was conducted in two different ED populations within a large academic hospital. Neutrophil and monocyte volume parameters were measured in conjunction with routine CBC testing on a UniCel DxH 800 analyzer at the time of ED admission and were evaluated for the detection of sepsis. There were 1,320 subjects in the ED consecutively enrolled and categorized as control subjects (n = 879) and those with systemic inflammatory response syndrome (SIRS) (n = 203), infection (n = 140), or sepsis (n = 98). Compared with other parameters, monocyte distribution width (MDW) best discriminated sepsis from all other conditions (area under the curve [AUC], 0.79; 95% CI, 0.73-0.84; sensitivity, 0.77; specificity, 0.73; MDW threshold, 20.50), sepsis from SIRS (AUC, 0.74; 95% CI, 0.67-0.84), and severe sepsis from noninfected patients in the ED (AUC, 0.88; 95% CI, 0.75-0.99; negative predictive value, 99%). The added value of MDW to WBC count was statistically significant (AUC, 0.89 for MDW + WBC vs 0.81 for WBC alone; P sepsis compared with WBC count alone at the time of admission in the ED. ClinicalTrials.gov; No.: NCT02232750; URL: www.clinicaltrials.gov. Copyright © 2017 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

  15. Stability studies on refined soybean oil stored in various conditions

    International Nuclear Information System (INIS)

    Arawande, J.O.; Amoo, I.A.

    2008-01-01

    The 12 months stability study of freshly produced refined soybean oil revealed that refined soybean oil stored in plastic containers in dark was more hydrolytically and oxidatively stable than that stored in other containers in light condition. There was no significant difference at P < 0.05 in free fatty acids and acid value of oil stored under light and dark conditions in tin and glass containers but there was significant difference at P < 0.05 in peroxide value of oil stored in light and dark conditions in all the storage containers. Light increased the degree of oxidative rancidity of refined soybean oil, the most in tin containers, followed by glass containers and the least in plastic containers. (author)

  16. Exploring Older Adult ED Fall Patients' Understanding of Their Fall: A Qualitative Study.

    Science.gov (United States)

    Shankar, Kalpana N; Taylor, Devon; Rizzo, Caroline T; Liu, Shan W

    2017-12-01

    We sought to understand older patients' perspectives about their fall, fall risk factors, and attitude toward emergency department (ED) fall-prevention interventions. We conducted semistructured interviews between July 2015 and January 2016 of community-dwelling, nondemented patients in the ED, who presented with a fall to an urban, teaching hospital. Interviews were halted once we achieve thematic saturation with the data coded and categorized into themes. Of the 63 patients interviewed, patients blamed falls on the environment, accidents, a medical condition, or themselves. Three major themes were generated: (1) patients blamed falls on a multitude of things but never acknowledged a possible multifactorial rationale, (2) patients have variable level of concerns regarding their current fall and future fall risk, and (3) patients demonstrated a range of receptiveness to ED interventions aimed at preventing falls but provided little input as to what those interventions should be. Many older patients who fall do not understand their fall risk. However, based on the responses provided, older adults tend to be more receptive to intervention and more concerned about their future fall risk, making the ED an appropriate setting for intervention.

  17. Mai alguses linastub dokfilm "Sinimäed" / Andris Feldmanis

    Index Scriptorium Estoniae

    Feldmanis, Andris, 1982-

    2006-01-01

    Valminud on 6-osalise ajaloodokumentaalide sarja "Kuum külm sõda" teine film "Sinimäed" : stsenaristid Kiur Aarma, Mart Laar, Eerik-Niiles Kross, Raimo Jõerand : režissöör Raimo Jõerand : Ruut Pictures

  18. Atlantic Basin refining profitability

    International Nuclear Information System (INIS)

    Jones, R.J.

    1998-01-01

    A review of the profitability margins of oil refining in the Atlantic Basin was presented. Petroleum refiners face the continuous challenge of balancing supply with demand. It would appear that the profitability margins in the Atlantic Basin will increase significantly in the near future because of shrinking supply surpluses. Refinery capacity utilization has reached higher levels than ever before. The American Petroleum Institute reported that in August 1997, U.S. refineries used 99 per cent of their capacity for several weeks in a row. U.S. gasoline inventories have also declined as the industry has focused on reducing capital costs. This is further evidence that supply and demand are tightly balanced. Some of the reasons for tightening supplies were reviewed. It was predicted that U.S. gasoline demand will continue to grow in the near future. Gasoline demand has not declined as expected because new vehicles are not any more fuel efficient today than they were a decade ago. Although federally-mandated fuel efficiency standards were designed to lower gasoline consumption, they may actually have prevented consumption from falling. Atlantic margins were predicted to continue moving up because of the supply and demand evidence: high capacity utilization rates, low operating inventories, limited capacity addition resulting from lower capital spending, continued U.S. gasoline demand growth, and steady total oil demand growth. 11 figs

  19. The effect of refining step on the changes in viscosity values of vegetable oils

    International Nuclear Information System (INIS)

    Ergonul, P.G.

    2013-01-01

    In this work, the viscosity values of chemically refined vegetable oils (sunflower, corn, soybean and rapeseed) and physically refined vegetable oils (olive and palm) were determined during refining processes. At this point of view, fatty acid compositions and viscosity values of oil samples were determined. The edible vegetable oils presented Newtonian behavior in shear rates at ranges 6.28-20.93 s/sup -1/. It was observed that palm oil is more viscous than the others. During physical refining, the effect of both oil type and refining steps were significantly important, whereas in chemical refining only the effect of oil type was found statistically important (p<0.01). It was observed that correlation among fatty acid compositions and viscosity values of the samples showed differences according to oil type. (author)

  20. Hybrid direct and iterative solvers for h refined grids with singularities

    KAUST Repository

    Paszyński, Maciej R.; Paszyńska, Anna; Dalcin, Lisandro; Calo, Victor M.

    2015-01-01

    on top of it. The hybrid solver is applied for two or three dimensional grids automatically h refined towards point or edge singularities. The automatic refinement is based on the relative error estimations between the coarse and fine mesh solutions [2

  1. Panorama 2016 - Refining outlook for 2035

    International Nuclear Information System (INIS)

    Marion, Pierre; Saint-Antonin, Valerie

    2015-12-01

    The rising influence of objectives intended to address the energy transition in global industry helps to perpetuate a high degree of uncertainty about changes in the transportation sector, currently a bastion of the oil industry. How can the growing need for individual mobility be met while reducing Greenhouse Gas (GHG) emissions in a world of open international competition? The refining sector is gaining strength in Asia and the Middle East to the detriment of Europe and North America, reflecting demand and the intrinsic competitiveness of various geographic regions. The 2025 worldwide roll-out (2020 in Europe) of a bunker fuel grade below 0.5 wt% (percentage by weight) in sulphur could experience delays, given the number of installations to be completed. Finally, the reversal of the 'all diesel' trend in the European transport market is a positive change for the European refining industry. (authors)

  2. Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Technical Appendices

    Science.gov (United States)

    Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

    2016-01-01

    In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…

  3. Tree automata-based refinement with application to Horn clause verification

    DEFF Research Database (Denmark)

    Kafle, Bishoksan; Gallagher, John Patrick

    2015-01-01

    In this paper we apply tree-automata techniques to refinement of abstract interpretation in Horn clause verification. We go beyond previous work on refining trace abstractions; firstly we handle tree automata rather than string automata and thereby can capture traces in any Horn clause derivation...... compare the results with other state of the art Horn clause verification tools....

  4. The regulations concerning refining business of nuclear source material and nuclear fuel materials

    International Nuclear Information System (INIS)

    1979-01-01

    The regulations are provided for under the law for the regulations of nuclear source materials, nuclear fuel materials and reactors and provisions concerning refining business in the enforcement order for the law. The basic concepts and terms are defined, such as: exposure dose, accumulative dose; controlled area; inspected surrounding area and employee. Refining facilities listed in the application for designation shall be classified into clushing and leaching, thickning, refining facilities, storage facilities of nuclear source materials and nuclear fuel materials, disposal facilities of contaminated substances and building for refining, etc. Business program attached to the application shall include expected time of beginning of refining, estimated production amount of nuclear source materials or nuclear fuel materials for the first three years and funds necessary for construction, etc. Records shall be made and kept for particular periods on delivery and storage of nuclear source materials and nuclear fuel materials, control of radiation, maintenance and accidents of refining facilities. Safety securing, application of internationally regulated substances and measures in dangerous situations are stipulated respectively. Exposure dose of employees and other specified matters shall be reported by the refiner yearly to the Director General of Science and Technology Agency and the Minister of International Trade and Industry. (Okada, K.)

  5. Two-Step Process for ED UTI Screening in Febrile Young Children: Reducing Catheterization Rates.

    Science.gov (United States)

    Lavelle, Jane M; Blackstone, Mercedes M; Funari, Mary Kate; Roper, Christine; Lopez, Patricia; Schast, Aileen; Taylor, April M; Voorhis, Catherine B; Henien, Mira; Shaw, Kathy N

    2016-07-01

    Urinary tract infection (UTI) screening in febrile young children can be painful and time consuming. We implemented a screening protocol for UTI in a high-volume pediatric emergency department (ED) to reduce urethral catheterization, limiting catheterization to children with positive screens from urine bag specimens. This quality-improvement initiative was implemented using 3 Plan-Do-Study-Act cycles, beginning with a small test of the proposed change in 1 ED area. To ensure appropriate patients received timely screening, care teams discussed patient risk factors and created patient-specific, appropriate procedures. The intervention was extended to the entire ED after providing education. Finally, visual cues were added into the electronic health record, and nursing scripts were developed to enlist family participation. A time-series design was used to study the impact of the 6-month intervention by using a p-chart to determine special cause variation. The primary outcome measure for the study was defined as the catheterization rate in febrile children ages 6 to 24 months. The ED reduced catheterization rates among febrile young children from 63% to UTIs among those followed within the hospital's network. A 2-step less-invasive process for screening febrile young children for UTI can be instituted in a high-volume ED without increasing length of stay or missing cases of UTI. Copyright © 2016 by the American Academy of Pediatrics.

  6. Catalysts in petroleum refining and petrochemical industries 1995

    Energy Technology Data Exchange (ETDEWEB)

    Absi-Halabi, M.; Beshara, J.; Qabazard, H.; Stanislaus, A. [eds.] [Petroleum, Petrochemicals and Materials Division, Kuwait Institute of Scientific Research, Kuwait (Kuwait)

    1996-07-01

    Catalysis plays an increasingly critical role in modern petroleum refining and basic petrochemical industries. The market demands for and specifications of petroleum and petrochemical products are continuously changing. They have impacted the industry significantly over the past twenty years. Numerous new refining processes have been developed and significant improvements were made on existing technologies. Catalysts have been instrumental in enabling the industry to meet the continuous challenges posed by the market. As we enter the 21st century, new challenges for catalysis science and technology are anticipated in almost every field. Particularly, better utilization of petroleum resources and demands for cleaner transportation fuels are major items on the agenda. It is against this background that the 2nd International Conference on Catalysts in Petroleum Refining and Petrochemical Industries was organized. The papers from the conference were carefully selected from around 100 submissions. They were a mix of reviews providing an overview of selected areas, original fundamental research results, and industrial experiences. The papers in the proceedings were grouped in the following sections for quick reference: Plenary Papers; Hydroprocessing of Petroleum Residues and Distillates; Fluid Catalytic Cracking; Oxidation Catalysis; Aromatization and Polymerization Catalysis; Catalyst Characterization and Performance. The plenary papers were mostly reviews covering important topics related to the objectives of the conference. The remaining sections cover various topics of major impact on modern petroleum refining and petrochemical industries. A large number of papers dealt with hydroprocessing of petroleum distillates and residues which reflects the concern over meeting future sulfur-level specifications for diesel and fuel oils

  7. Profex: a graphical user interface for the Rietveld refinement program BGMN.

    Science.gov (United States)

    Doebelin, Nicola; Kleeberg, Reinhard

    2015-10-01

    Profex is a graphical user interface for the Rietveld refinement program BGMN . Its interface focuses on preserving BGMN 's powerful and flexible scripting features by giving direct access to BGMN input files. Very efficient workflows for single or batch refinements are achieved by managing refinement control files and structure files, by providing dialogues and shortcuts for many operations, by performing operations in the background, and by providing import filters for CIF and XML crystal structure files. Refinement results can be easily exported for further processing. State-of-the-art graphical export of diffraction patterns to pixel and vector graphics formats allows the creation of publication-quality graphs with minimum effort. Profex reads and converts a variety of proprietary raw data formats and is thus largely instrument independent. Profex and BGMN are available under an open-source license for Windows, Linux and OS X operating systems.

  8. Stable grid refinement and singular source discretization for seismic wave simulations

    Energy Technology Data Exchange (ETDEWEB)

    Petersson, N A; Sjogreen, B

    2009-10-30

    An energy conserving discretization of the elastic wave equation in second order formulation is developed for a composite grid, consisting of a set of structured rectangular component grids with hanging nodes on the grid refinement interface. Previously developed summation-by-parts properties are generalized to devise a stable second order accurate coupling of the solution across mesh refinement interfaces. The discretization of singular source terms of point force and point moment tensor type are also studied. Based on enforcing discrete moment conditions that mimic properties of the Dirac distribution and its gradient, previous single grid formulas are generalized to work in the vicinity of grid refinement interfaces. These source discretization formulas are shown to give second order accuracy in the solution, with the error being essentially independent of the distance between the source and the grid refinement boundary. Several numerical examples are given to illustrate the properties of the proposed method.

  9. Demand, deregulation may attract more refiners to Asia

    International Nuclear Information System (INIS)

    Rhodes, A.K.

    1995-01-01

    As a result of rapidly increasing demand, major oil companies are eyeing Asian oil and gas markets more closely than ever. Higher earnings can be expected there than in the US or Europe, where product markets--especially light products--are expected to tighten long-term. Of the nations with growing requirements for refined products, China and India offer greater opportunity for foreign investors to enter downstream projects. Also offering excellent business prospects are Thailand, Malaysia, and Indonesia. The paper discusses oil demand, products, refining capacity, and capacity additions in Japan, South Korea, Taiwan, Singapore, India, Indonesia, Malaysia, and China

  10. EdF in the core of UK's nuclear industry... before expecting more

    International Nuclear Information System (INIS)

    Moal, C.

    2008-01-01

    With the announcement at the end of September 2008 of EdF's friendly takeover bid on British Energy, the French group confirms its will of dominating the European nuclear industry before going back to the assault of the US market. Together, EdF and British Energy (owner of 8 NPPs (9.5 GW) and 1 coal-fired power plant (2 GW)) will make a turnover of 11.9 billion euro with 19800 employees and 85.6 TWh of production. Short paper. (J.S.)

  11. China's refiners face massive overhaul, expansion to meet demand growth, new crude slate

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    China's refining industry has embarked on a massive overhaul and expansion to accommodate soaring domestic growth in refined products demand. Currently that growth in demand is being met by increasing imports of refined products, in recent years attaining triple digit growth rates and squeezing direly needed foreign exchange. The focus is on adding refining capacity of about 1.4 million b/d to the current capacity of about 3.2 million b/d by 2000. Priority for increasing capacity is being given to expanding existing refineries and participating in foreign joint venture grassroots refineries along China's booming coastal regions as well as hiking output. A major challenge for China's refineries is that country's reentry into the General Agreement on Tariffs and Trade (GATT), recently signed in Morocco by more than 100 nations. The accompanying reduction of tariffs on imported refined products will make it more difficult for China's marginal refineries to compete in the domestic market. The paper discusses imports and exports, LPG outlook, refining capacity, revamps needed, third party processing, China's first joint venture refinery, industry plans, and GATT challenges

  12. Murray Pittock, ed., The Edinburgh Companion to Scottish Romanticism.

    Directory of Open Access Journals (Sweden)

    Manfred Malzahn

    2013-10-01

    Full Text Available Murray Pittock, ed., The Edinburgh Companion to Scottish Romanticism. Edinburgh: Edinburgh University Press, 2011. Pp. 251. ISBN 978-0-7486-3845-1 (hardback. £ 65.00. ISBN 978-0-7486-3846-8 (paperback. £ 21.99.

  13. The Refining Mechanism of Super Gravity on the Solidification Structure of Al-Cu Alloys

    Directory of Open Access Journals (Sweden)

    Yuhou Yang

    2016-12-01

    Full Text Available There is far less study of the refining effect of super gravity fields on solidification structures of metals than of the effects of electrical currents, magnetic and ultrasonic fields. Moreover, the refining mechanisms of super gravity are far from clear. This study applied a super gravity field to Al-Cu alloys to investigate its effect on refining their structures and the mechanism of interaction. The experimental results showed that the solidification structure of Al-Cu alloys can be greatly refined by a super gravity field. The major refining effect was mainly achieved when super gravity was applied at the initial solidification stage; only slight refinement could be obtained towards the end of solidification. No refinement was obtained by the super gravity treatment on pure liquid or solid stages. The effectiveness of super gravity results from its promoting the multiplication of crystal nuclei, which we call “Heavy Crystal Rain”, thereby greatly strengthening the migration of crystal nuclei within the alloy. Increasing the solute Cu content can increase nucleation density and restrict the growth of crystals, which further increases the refining effect of super gravity. Within this paper, we also discuss the motile behavior of crystals in a field of super gravity.

  14. Effect of grain refinement on the fluidity of two commercial Al-Si foundry alloys

    Science.gov (United States)

    Dahle, A. K.; Tøndel, P. A.; Paradies, C. J.; Arnberg, L.

    1996-08-01

    The effect of grain refinement on the fluidity of AlSi7Mg and AlSi11Mg has been investigated by spiral tests. Two different types of grain refiners have been evaluated. An AlTi5Bl master alloy was added to different Ti contents. Since the commercial alloys had a high initial content of titanium, model alloys were made to investigate the fluidity at low grain refiner additions. Commercial alloys grain refined only by boron additions have also been investigated. The results from the fluidity measurements have been verified by measuring the dendrite coherency point of the different cast alloys. Although different, the two methods show similar trends. The spirals from each fraction grain refiner cast were subsequently investigated metallographically at the tip of the spirals and at a reference point a distance behind, but no obvious difference in structure was observed. For both alloys, an increase in fluidity is observed as the content of grain refiner increases above 0.12 pct Ti, while the fluidity is impaired with increased grain refinement below 0.12 pct Ti. The alloys grain refined with ~0.015 pct B show the highest fraction solid at dendrite coherency, the smallest grain size, and the best fluidity.

  15. The epidemiology of assault-related hospital in-patient admissions and ED attendances.

    LENUS (Irish Health Repository)

    O'Farrell, A

    2013-03-01

    The aim of this study was to describe the epidemiology and impact of serious assault warranting in-patient care over six years and its impact on ED attendances in a large teaching hospital in Dublin over 2 years. There were 16,079 emergency assault-related inpatient hospital discharges reducing from 60.1 per 100,000 population in 2005 to 50.6 per 100,000 population in 2010. The median length of stay was 1 day (1-466) representing 49,870 bed days. The majority were young males (13,921, 86.6%; median age 26 years). Overall crime figures showed a similar reduction. However, knife crimes did not reduce over this period. Data on ED attendances confirmed the age and gender profile and also showed an increase at weekends. Alcohol misuse was recorded in 2,292\\/16079 (14%) of in-patient cases and 242\\/2484 (10%) in ED attendances. An inter-sectoral preventative approach specifically targeting knife crime is required to reduce this burden on health services.

  16. Effect of advanced age and vital signs on admission from an ED observation unit.

    Science.gov (United States)

    Caterino, Jeffrey M; Hoover, Emily M; Moseley, Mark G

    2013-01-01

    The primary objective was to determine the relationship between advanced age and need for admission from an emergency department (ED) observation unit. The secondary objective was to determine the relationship between initial ED vital signs and admission. We conducted a prospective, observational cohort study of ED patients placed in an ED-based observation unit. Multivariable penalized maximum likelihood logistic regression was used to identify independent predictors of need for hospital admission. Age was examined continuously and at a cutoff of 65 years or more. Vital signs were examined continuously and at commonly accepted cutoffs.We additionally controlled for demographics, comorbid conditions, laboratory values, and observation protocol. Three hundred patients were enrolled, 12% (n = 35) were 65 years or older, and 11% (n = 33) required admission. Admission rates were 2.9% (95% confidence interval [CI], 0.07%-14.9%) in older adults and 12.1% (95% CI, 8.4%-16.6%) in younger adults. In multivariable analysis, age was not associated with admission (odds ratio [OR], 0.30; 95% CI, 0.05-1.67). Predictors of admission included systolic pressure 180 mm Hg or greater (OR, 4.19; 95% CI, 1.08-16.30), log Charlson comorbidity score (OR, 2.93; 95% CI, 1.57-5.46), and white blood cell count 14,000/mm(3) or greater (OR, 11.35; 95% CI, 3.42-37.72). Among patients placed in an ED observation unit, age 65 years or more is not associated with need for admission. Older adults can successfully be discharged from these units. Systolic pressure 180 mm Hg or greater was the only predictive vital sign. In determining appropriateness of patients selected for an ED observation unit, advanced age should not be an automatic disqualifying criterion. Copyright © 2013 Elsevier Inc. All rights reserved.

  17. Microstructures and Grain Refinement of Additive-Manufactured Ti- xW Alloys

    Science.gov (United States)

    Mendoza, Michael Y.; Samimi, Peyman; Brice, David A.; Martin, Brian W.; Rolchigo, Matt R.; LeSar, Richard; Collins, Peter C.

    2017-07-01

    It is necessary to better understand the composition-processing-microstructure relationships that exist for materials produced by additive manufacturing. To this end, Laser Engineered Net Shaping (LENS™), a type of additive manufacturing, was used to produce a compositionally graded titanium binary model alloy system (Ti- xW specimen (0 ≤ x ≤ 30 wt pct), so that relationships could be made between composition, processing, and the prior beta grain size. Importantly, the thermophysical properties of the Ti- xW, specifically its supercooling parameter ( P) and growth restriction factor ( Q), are such that grain refinement is expected and was observed. The systematic, combinatorial study of this binary system provides an opportunity to assess the mechanisms by which grain refinement occurs in Ti-based alloys in general, and for additive manufacturing in particular. The operating mechanisms that govern the relationship between composition and grain size are interpreted using a model originally developed for aluminum and magnesium alloys and subsequently applied for titanium alloys. The prior beta grain factor observed and the interpretations of their correlations indicate that tungsten is a good grain refiner and such models are valid to explain the grain-refinement process. By extension, other binary elements or higher order alloy systems with similar thermophysical properties should exhibit similar grain refinement.

  18. A new concept for product refining in the Purex process

    International Nuclear Information System (INIS)

    Henrich, E.; Bauder, U.; Marquardt, R.

    1986-01-01

    In actual Purex plants the products are refined in additional solvent extraction cycles. Crystallization of uranyl and plutonyl nitrate from aqueous nitric acid solution is proposed as a potentially simpler product refining concept. Suitable crystallization conditions are being investigated in the laboratory using simulated and actual process solutions. A thorough removal of mother liquor is an essential purification step and well washed crystals usually contain less than 1% of an individual impurity. Crystallization simultaneously comprises a product concentration step. Hexavalent uranium can be separated from lower-valent plutonium. An outline of an integrated processing concept is given. Product refining by crystallization is compact; recycling of mother liquor plus wash acid prevents product loss and the generation of additional waste streams. (orig.) [de

  19. 40 CFR 80.1142 - What are the provisions for small refiners under the RFS program?

    Science.gov (United States)

    2010-07-01

    ... all of the following criteria: (i) The refiner produced gasoline at its refineries by processing crude... Standard § 80.1142 What are the provisions for small refiners under the RFS program? (a)(1) Gasoline produced by a refiner, or foreign refiner (as defined at § 80.1165(a)), is exempt from the renewable fuel...

  20. Male sexuality and regulation of emotions: a study on the association between alexithymia and erectile dysfunction (ED).

    Science.gov (United States)

    Michetti, P M; Rossi, R; Bonanno, D; Tiesi, A; Simonelli, C

    2006-01-01

    Alexithymia is a multidimensional construct that describes a constellation of personality features characterised by difficulties in differentiating, identifying and communicating emotions. The purpose of the present study was to investigate prevalence of alexithymia in outpatients with erectile dysfunction (ED), both in the psychogenic lifelong type (PLED) and in the acquired one (PAED). ED severity was evaluated with the International Index of Erectile Function (IIEF) and alexithymia was measured using the Italian version of the 20-item Toronto Alexithymia Scale (TAS-20). The results suggest a high incidence of alexithymic characteristics in patients with psychogenic ED, a positive correlation between the alexithymia level and ED severity in patients with PAED and statistically significant differences in the alexithymia level between the two subgroups PLED and PAED. We assumed that alexithymia contributes to the origin of the PLED, and to a more severe manifestation of ED, once it appears in the acquired form.

  1. On Syntactic and Semantic Action Refinement

    NARCIS (Netherlands)

    Goltz, Ursula; Gorrieri, Roberto; Rensink, Arend

    1992-01-01

    The semantic definition of action refinement on labelled event structures is compared with the notion of syntactic substitution,which can be used as another notion of action refiment in a process algebraic setting. This is done by studying a process algebra equipped with the ACP sequential

  2. Quantum Geometry of Refined Topological Strings

    NARCIS (Netherlands)

    Aganagic, M.; Cheng, M.C.N.; Dijkgraaf, R.; Kreft, D.; Vafa, C.

    2012-01-01

    We consider branes in refined topological strings. We argue that their wavefunctions satisfy a Schrödinger equation depending on multiple times and prove this in the case where the topological string has a dual matrix model description. Furthermore, in the limit where one of the equivariant

  3. 2003 annual results of EdF group; Resultats annuels 2003 du groupe EDF

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-03-01

    The Electricite de France (EdF) group Board of Directors, meeting on March 11, 2004, under the Chairmanship of Francois Roussely, reviewed the audited consolidated financial statements for the year ended 12/31/2003. This document presents the consolidated results of EdF group for 2003: consolidated financial statements, highlights of the year, focus on 2003 events, commercial results, EDF in Europe and worldwide, EDF France highlights, key figures. (J.S.)

  4. [Efficacy of low-dose tadalafil on ED assessed by Self-Esteem and Relationship Questionnaire].

    Science.gov (United States)

    Li, Jing-Ping; Li, Fei; Guo, Wen-Bin; Zhou, Qi-Zhao; Liu, Cun-Dong; Mao, Xiang-Ming; Tan, Wan-Long; Zheng, Shao-Bin

    2010-12-01

    To explore the effects of low-dose oral tadalafil on self-esteem, confidence and sexual relationship in ED patients. We treated 17 ED patients with oral tadalafil at the low dose of 5 mg once daily for 12 weeks, and used the paired t test to compare their scores on The Self-Esteem and Relationship Questionnaire (SEAR) and IIEF-5 and the results of nocturnal penile tumescence (NPT) obtained by nocturnal electrobioimpedance volumetric assessment (NEVA) before and after the medication. The scores on SEAR and IIEF-5 were significantly increased (P P Low-dose oral tadalafil once daily can significantly improve the self-esteem, confidence, sexual relationship satisfaction and NPT of ED patients.

  5. Paid sick leave is associated with fewer ED visits among US private sector working adults.

    Science.gov (United States)

    Bhuyan, Soumitra S; Wang, Yang; Bhatt, Jay; Dismuke, S Edward; Carlton, Erik L; Gentry, Dan; LaGrange, Chad; Chang, Cyril F

    2016-05-01

    The United States (US) is the only developed country that does not guarantee short-term or longer-term paid sick leave. This study used a multiyear nationally representative database to examine the association between availability of paid sick leave and frequency of emergency department (ED) use among US private sector employees. We used the National Health Interview Survey data (2012-2014). The final study sample consists of 42,460 US adults between 18 and 64years of age and working in nongovernmental private sector. Our results suggest that availability of paid sick leave is significantly associated with lower likelihood of ED use, for both moderate (1-3 times/year) and repeated users (4 or more times/year). After controlling for confounding factors, respondents with paid sick leave are 14% less likely to be moderate ED users (adjusted odds ratio, 0.86; 95% CI, 0.79-0.93) and 32% less likely to be repeated ED users (adjusted odds ratio, 0.68; 95% CI, 0.50-0.91). Although expansion of health insurance coverage under the Affordable Care Act has not been shown to reduce utilization of high cost health care services such as the ED, our study suggests other factors such as the availability of paid sick leave may do so, by allowing patients to seek care through other more cost-effective mechanisms (eg, primary care providers). To reduce ED utilization, health policymakers should consider alternative reforms including paid sick leave. Copyright © 2016 Elsevier Inc. All rights reserved.

  6. Government will shape China's refining boom

    International Nuclear Information System (INIS)

    Wang, H.

    1995-01-01

    China's refining system is undergoing a major overhaul. New refineries are being built as existing ones are upgraded and expanded. The success of refineries funded completely or partially by non-chinese companies will depend in part on Chinese government policy. There will be demand for products from third-party processing facilities, but hard current is necessary for the investors to repatriate profits and for china Petrochemical Corp. (Sinopec) to bid on the products from such facilities. The limited convertibility of chinese current constitutes a major central control over the country's entire economy. This control can be affected by limiting product exchange participants and the volumes to be traded. Such a limitation, however, will reduce access of non-Chinese companies to China's markets, and is not likely to occur in the next 10 years. The paper discusses the current situation in capacity and in refining, capacity, expansion, refinery planning, construction projects, third-party processing, and the prospects for change

  7. Multivariate refined composite multiscale entropy analysis

    International Nuclear Information System (INIS)

    Humeau-Heurtier, Anne

    2016-01-01

    Multiscale entropy (MSE) has become a prevailing method to quantify signals complexity. MSE relies on sample entropy. However, MSE may yield imprecise complexity estimation at large scales, because sample entropy does not give precise estimation of entropy when short signals are processed. A refined composite multiscale entropy (RCMSE) has therefore recently been proposed. Nevertheless, RCMSE is for univariate signals only. The simultaneous analysis of multi-channel (multivariate) data often over-performs studies based on univariate signals. We therefore introduce an extension of RCMSE to multivariate data. Applications of multivariate RCMSE to simulated processes reveal its better performances over the standard multivariate MSE. - Highlights: • Multiscale entropy quantifies data complexity but may be inaccurate at large scale. • A refined composite multiscale entropy (RCMSE) has therefore recently been proposed. • Nevertheless, RCMSE is adapted to univariate time series only. • We herein introduce an extension of RCMSE to multivariate data. • It shows better performances than the standard multivariate multiscale entropy.

  8. Effect of Cellulases and Xylanases on Refining Process and Kraft Pulp Properties.

    Directory of Open Access Journals (Sweden)

    Kamila Przybysz Buzała

    Full Text Available Samples of bleached kraft pine cellulosic pulp, either treated with an enzyme preparation (a Thermomyces lanuginosus xylanase, an Aspergillus sp. cellulase, and a multienzyme preparation NS-22086 containing both these activities or untreated, were refined in a laboratory PFI mill. The treatment with cellulases contained in the last two preparations significantly improved the pulp's susceptibility to refining (the target freeness value of 30°SR was achieved in a significantly shorter time, increased water retention value (WRV and fines contents while the weighted average fiber length was significantly reduced. These changes of pulp parameters caused deterioration of paper strength properties. The treatment with the xylanase, which partially hydrolyzed xylan, small amounts of which are associated with cellulose fibers, only slightly loosened the structure of fibers. These subtle changes positively affected the susceptibility of the pulp to refining (refining energy was significantly reduced and improved the static strength properties of paper. Thus, the treatment of kraft pulps with xylanases may lead to substantial savings of refining energy without negative effects on paper characteristics.

  9. Synthesis of Al-5Ti-1B Refiner by Melt Reaction Method

    Directory of Open Access Journals (Sweden)

    LI He

    2017-02-01

    Full Text Available Al-5Ti-1B refiner was successfully prepared by melt reaction method. Through the thermodynamics calculation, the initial reaction temperature was determined. The influence of reaction temperature on microstructure and absorption rate of the alloy was investigated. The phase and microstructure of the alloy were observed by X-ray diffraction, scanning electron microscope and energy dispersive spectrometer. The Al-5Ti-1B refiner was extruded at high temperature to wire with the diameter of 9.5mm, and then the refinement experiment was carried out on pure aluminium. The results indicate that the refiner consists of TiB2, TiAl3 and α-Al, and the microstructure prepared at 850℃ is the optimum and the absorption rate of Ti and B matches the best. The TiAl3 and TiB2 phases distribute homogeneously in the matrix after extrusion. When adding 0.2%(mass fraction of Al-5Ti-1B refiner, the grain size of pure aluminium reduces from 3.99mm to 0.45mm.

  10. Region-of-interest volumetric visual hull refinement

    KAUST Repository

    Knoblauch, Daniel

    2010-01-01

    This paper introduces a region-of-interest visual hull refinement technique, based on flexible voxel grids for volumetric visual hull reconstructions. Region-of-interest refinement is based on a multipass process, beginning with a focussed visual hull reconstruction, resulting in a first 3D approximation of the target, followed by a region-of-interest estimation, tasked with identifying features of interest, which in turn are used to locally refine the voxel grid and extract a higher-resolution surface representation for those regions. This approach is illustrated for the reconstruction of avatars for use in tele-immersion environments, where head and hand regions are of higher interest. To allow reproducability and direct comparison a publicly available data set for human visual hull reconstruction is used. This paper shows that region-of-interest reconstruction of the target is faster and visually comparable to higher resolution focused visual hull reconstructions. This approach reduces the amount of data generated through the reconstruction, allowing faster post processing, as rendering or networking of the surface voxels. Reconstruction speeds support smooth interactions between the avatar and the virtual environment, while the improved resolution of its facial region and hands creates a higher-degree of immersion and potentially impacts the perception of body language, facial expressions and eye-to-eye contact. Copyright © 2010 by the Association for Computing Machinery, Inc.

  11. Pacific Basin Heavy Oil Refining Capacity

    Directory of Open Access Journals (Sweden)

    David Hackett

    2013-02-01

    Full Text Available The United States today is Canada’s largest customer for oil and refined oil products. However, this relationship may be strained due to physical, economic and political influences. Pipeline capacity is approaching its limits; Canadian oil is selling at substantive discounts to world market prices; and U.S. demand for crude oil and finished products (such as gasoline, has begun to flatten significantly relative to historical rates. Lower demand, combined with increased shale oil production, means U.S. demand for Canadian oil is expected to continue to decline. Under these circumstances, gaining access to new markets such as those in the Asia-Pacific region is becoming more and more important for the Canadian economy. However, expanding pipeline capacity to the Pacific via the proposed Northern Gateway pipeline and the planned Trans Mountain pipeline expansion is only feasible when there is sufficient demand and processing capacity to support Canadian crude blends. Canadian heavy oil requires more refining and produces less valuable end products than other lighter and sweeter blends. Canadian producers must compete with lighter, sweeter oils from the Middle East, and elsewhere, for a place in the Pacific Basin refineries built to handle heavy crude blends. Canadian oil sands producers are currently expanding production capacity. Once complete, the Northern Gateway pipeline and the Trans Mountain expansion are expected to deliver an additional 500,000 to 1.1 million barrels a day to tankers on the Pacific coast. Through this survey of the capacity of Pacific Basin refineries, including existing and proposed facilities, we have concluded that there is sufficient technical capacity in the Pacific Basin to refine the additional Canadian volume; however, there may be some modifications required to certain refineries to allow them to process Western Canadian crude. Any additional capacity for Canadian oil would require refinery modifications or

  12. Development of a Refined Staff Group Trainer

    National Research Council Canada - National Science Library

    Quensel, Susan

    1999-01-01

    .... As a follow-on effort to the previous SGT project, the goal was to refine a brigade-level staff training program to more effectively and efficiently coordinate the activities within and between the...

  13. Discontinuous Galerkin discretization and hp-refinement for the resolution of the neutron transport equation

    International Nuclear Information System (INIS)

    Fournier, Damien; Le-Tellier, Romain; Herbin, Raphaele

    2013-01-01

    This paper presents an hp-refinement method for a first order scalar transport reaction equation discretized by a discontinuous Galerkin method. First, the theoretical rates of convergence of h- and p-refinement are recalled and numerically tested. Then, in order to design some meshes, we propose two different estimators of the local error on the spatial domain. These quantities are analyzed and compared depending on the regularity of the solution so as to find the best way to lead the refinement process and the best strategy to choose between h- and p-refinement. Finally, the different possible refinement strategies are compared first on analytical examples and then on realistic applications for neutron transport in a nuclear reactor core. (authors)

  14. Adaptation of Lorke's method to determine and compare ED50 values: the cases of two anticonvulsants drugs.

    Science.gov (United States)

    Garrido-Acosta, Osvaldo; Meza-Toledo, Sergio Enrique; Anguiano-Robledo, Liliana; Valencia-Hernández, Ignacio; Chamorro-Cevallos, Germán

    2014-01-01

    We determined the median effective dose (ED50) values for the anticonvulsants phenobarbital and sodium valproate using a modification of Lorke's method. This modification allowed appropriate statistical analysis and the use of a smaller number of mice per compound tested. The anticonvulsant activities of phenobarbital and sodium valproate were evaluated in male CD1 mice by maximal electroshock (MES) and intraperitoneal administration of pentylenetetrazole (PTZ). The anticonvulsant ED50 values were obtained through modifications of Lorke's method that involved changes in the selection of the three first doses in the initial test and the fourth dose in the second test. Furthermore, a test was added to evaluate the ED50 calculated by the modified Lorke's method, allowing statistical analysis of the data and determination of the confidence limits for ED50. The ED50 for phenobarbital against MES- and PTZ-induced seizures was 16.3mg/kg and 12.7mg/kg, respectively. The sodium valproate values were 261.2mg/kg and 159.7mg/kg, respectively. These results are similar to those found using the traditional methods of finding ED50, suggesting that the modifications made to Lorke's method generate equal results using fewer mice while increasing confidence in the statistical analysis. This adaptation of Lorke's method can be used to determine median letal dose (LD50) or ED50 for compounds with other pharmacological activities. Copyright © 2014 Elsevier Inc. All rights reserved.

  15. Effect of zirconium addition on welding of aluminum grain refined by titanium

    International Nuclear Information System (INIS)

    Zaid, A.I.O.

    2011-01-01

    Aluminum and its alloys solidify in large grains columnar structure which tends to reduce their mechanical behaviour and surface quality. Therefore, they are industrially grain refined by titanium or titanium + boron. Furthermore, aluminum oxidizes in ordinary atmosphere which makes its weldability difficult and weak. Therefore, it is anticipated that the effect of addition of zirconium at a weight percentages of 0.1% (which proved to be an effective grain refiner on the weldability of aluminum grain refined by Ti) is worthwhile investigating. This formed the objective of this research work. In this paper, the effect of zirconium addition at a weight percentage of 0.1%, which corresponds to the peritctic limit on the aluminum-zirconium phase diagram, on the weldability of aluminum grain refined by Ti is investigated. Rolled sheets of commercially pure aluminum, Al grain refined Ti of 3 mm thickness were welded together using Gas Tungsten Arc Welding method (GTAW), formerly known as TIG. A constant air gap was maintained at a constant current level, 30 ampere AC, was used because it removes the oxides of the welding process under the same process parameters. Metallographic examination of weldments of the different combinations of aluminum and its microalloys at the heat affected zone, HAZ, and base metal was carried out and examined for width, porosity, cracks and microhardness. It was found that grain refining of commercially pure aluminum by Ti resulted in enhancement of its weldability. Similarly, addition of zirconium to Al grain refined by Ti resulted in further enhancement of the weldment. Photomicrographs of the HAZ regions are presented and discussed. (author)

  16. Validating neural-network refinements of nuclear mass models

    Science.gov (United States)

    Utama, R.; Piekarewicz, J.

    2018-01-01

    Background: Nuclear astrophysics centers on the role of nuclear physics in the cosmos. In particular, nuclear masses at the limits of stability are critical in the development of stellar structure and the origin of the elements. Purpose: We aim to test and validate the predictions of recently refined nuclear mass models against the newly published AME2016 compilation. Methods: The basic paradigm underlining the recently refined nuclear mass models is based on existing state-of-the-art models that are subsequently refined through the training of an artificial neural network. Bayesian inference is used to determine the parameters of the neural network so that statistical uncertainties are provided for all model predictions. Results: We observe a significant improvement in the Bayesian neural network (BNN) predictions relative to the corresponding "bare" models when compared to the nearly 50 new masses reported in the AME2016 compilation. Further, AME2016 estimates for the handful of impactful isotopes in the determination of r -process abundances are found to be in fairly good agreement with our theoretical predictions. Indeed, the BNN-improved Duflo-Zuker model predicts a root-mean-square deviation relative to experiment of σrms≃400 keV. Conclusions: Given the excellent performance of the BNN refinement in confronting the recently published AME2016 compilation, we are confident of its critical role in our quest for mass models of the highest quality. Moreover, as uncertainty quantification is at the core of the BNN approach, the improved mass models are in a unique position to identify those nuclei that will have the strongest impact in resolving some of the outstanding questions in nuclear astrophysics.

  17. Oil refining and product market developments in Europe

    International Nuclear Information System (INIS)

    McDonald, P.

    1991-01-01

    One political development in Europe that will affect the petroleum refining industry is the opening of a single market among the European Commission countries. Although the single market officially opens on January 1, 1993, a single market for energy will not happen at that time. Most European countries feel that refining is a strategic industry and adopt some form of protectionism in this sector. Environmental policy in Europe tends to be separate from energy policy, making conflicts in setting standards for emissions and fuel composition somewhat inevitable. For example, both environmental and energy policies favor a carbon tax on fuels; the EC environmental commission does not want to be seen as favoring nuclear power, so it favors penalizing all fuels about the same amount, while the energy commission says the carbon tax should be related to the fuel carbon content. A measure affecting the refining industry is the proposal for reducing sulfur in diesel fuel. By 1994 EC countries will have a common 0.2% standard and by 1996 a 0.05% standard for automotive diesel. To meet the latter standard, refineries will need upgrading at an estimated cost of US$4 billion. Another political consideration for the refining industry is whether eastern Europe should be part of the EC energy community. However, if there is a reluctance in the western European countries for a single western market, there is even less enthusiasm for an energy market that includes eastern Europe as well. In addition, there is a reluctance to accept that there should be a free flow of petroleum products from east to west

  18. Grain refinement of Aluminium alloys using friction stir processing

    International Nuclear Information System (INIS)

    Khraisheh, M.

    2004-01-01

    Full text.Friction Stir Processing (FSP) is a new advanced material processing technique used to refine and homogenize the microstructure of sheet metals. FSP is a solid state processing technique that uses a rapidly rotating non-consumable high strength tool steel pin that extends from a cylindrical shoulder. The rotating pin is forced with a predetermined load into the work piece and moved along with the work pieces, while the rotating pin deforms and stirs the locally heated material. It is a hot working process in which a large amount of deformation is imparted to the sheet. FS processed zone is characterized by dynamic recrystallization which results in grain refinement . this promising emerging process needs further investigations to develop optimum process parameters to produce the desired microstructure. In this work, we present preliminary results on the effects of rotational and translational speeds on grain refinement of AA5052. Under certain processing conditions, sub-micron grain structure was produced using this technique

  19. Anomalies in the refinement of isoleucine

    NARCIS (Netherlands)

    Berntsen, K.R.M.; Vriend, G.

    2014-01-01

    A study of isoleucines in protein structures solved using X-ray crystallography revealed a series of systematic trends for the two side-chain torsion angles chi1 and chi2 dependent on the resolution, secondary structure and refinement software used. The average torsion angles for the nine rotamers

  20. New 'patent accelerated care environment' aims to facilitate work flow, free up ED for acute care needs.

    Science.gov (United States)

    2012-02-01

    Faced with rising acuity levels and surging demand, Virginia Mason Medical Center modified the Clinical Decision Unit concept used in many EDs, and developed a new Patient Accelerated Care Environment (PACE) to care for observation patients, process patients for discharge, and to prepare patients for admission.The approach is designed to utilize ED beds for initial processing of patients, allowing resuscitative care if needed, and treating and releasing the patients with quick care needs. Using the Virginia Mason Production System, a methodology that is modeled after Toyota production techniques, developers designed an optimal work flow pattern and then built infrastructure to facilitate that process. All patients who present to the ED for care are seen by the ED team through a "team greet" approach. Approximately 35% to 40% of patients who come to the ED for care are transferred to the PACE unit. Patients assigned to the PACE unit typically remain there for 4 to 48 hours, depending on their care needs.

  1. Automata Learning through Counterexample Guided Abstraction Refinement

    DEFF Research Database (Denmark)

    Aarts, Fides; Heidarian, Faranak; Kuppens, Harco

    2012-01-01

    to a small set of abstract events that can be handled by automata learning tools. In this article, we show how such abstractions can be constructed fully automatically for a restricted class of extended finite state machines in which one can test for equality of data parameters, but no operations on data...... are allowed. Our approach uses counterexample-guided abstraction refinement: whenever the current abstraction is too coarse and induces nondeterministic behavior, the abstraction is refined automatically. Using Tomte, a prototype tool implementing our algorithm, we have succeeded to learn – fully......Abstraction is the key when learning behavioral models of realistic systems. Hence, in most practical applications where automata learning is used to construct models of software components, researchers manually define abstractions which, depending on the history, map a large set of concrete events...

  2. Broad Categories for the Diagnosis of Eating Disorders (BCD-ED): An Alternative System for Classification

    Science.gov (United States)

    Walsh, B. Timothy; Sysko, Robyn

    2009-01-01

    Eating Disorder Not Otherwise Specified (EDNOS), a residual category in DSM-IV, is the most commonly used eating disorder diagnosis in clinical settings. However, the features of individuals with EDNOS are heterogeneous and difficult to characterize. A diagnostic scheme, termed Broad Categories for the Diagnosis of Eating Disorders (BCD-ED), is proposed to diminish use of the EDNOS category markedly while preserving the existing eating disorder categories. The BCD-ED scheme consists of three broad categories, in a hierarchical relationship, consisting of: Anorexia Nervosa and Behaviorally Similar disorders, Bulimia Nervosa and Behaviorally Similar Disorders, Binge Eating Disorder and Behaviorally Similar Disorders, and a residual category of EDNOS. The advantages and disadvantages of adopting this scheme for DSM-V are considered, and issues relevant to BCD-ED are discussed. Specifically, we review the proportion of individuals with DSM-IV EDNOS that would be re-classified under the BCD-ED system, support for the hierarchy of the three categories, and the potential risk of “overdiagnosis.” PMID:19650083

  3. Grain size refinement of inconel 718 thermomechanical processing

    International Nuclear Information System (INIS)

    Okimoto, P.C.

    1988-01-01

    Inconel 718 is a Ni-Fe precipitation treated superalloy. It presents good thermal fatigue properties when the material has small grain size. The aim of this work is to study the grain size refinement by thermomechanical processing, through observations of the microstructural evolution and the influence of some of the process variables in the final grain size. The results have shown that this refinement occured by static recrystallization. The presence of precipitates have influenced the final grain size if the deformations are below 60%. For greater deformations the grain size is independent of the precipitate distribution in the matrix and tends to a limit size of 5 μm. (author)

  4. The US petroleum refining industry in the 1980's

    Energy Technology Data Exchange (ETDEWEB)

    1990-10-11

    As part of the EIA program on petroleum, The US Petroleum Refining Industry in the 1980's, presents a historical analysis of the changes that took place in the US petroleum refining industry during the 1980's. It is intended to be of interest to analysts in the petroleum industry, state and federal government officials, Congress, and the general public. The report consists of six chapters and four appendices. Included is a detailed description of the major events and factors that affected the domestic refining industry during this period. Some of the changes that took place in the 1980's are the result of events that started in the 1970's. The impact of these events on US refinery configuration, operations, economics, and company ownership are examined. 23 figs., 11 tabs.

  5. Lossless, Near-Lossless, and Refinement Coding of Bi-level Images

    DEFF Research Database (Denmark)

    Martins, Bo; Forchhammer, Søren Otto

    1999-01-01

    We present general and unified algorithms for lossy/lossless coding of bi-level images. The compression is realized by applying arithmetic coding to conditional probabilities. As in the current JBIG standard the conditioning may be specified by a template.For better compression, the more general...... to the specialized soft pattern matching techniques which work better for text. Template based refinement coding is applied for lossy-to-lossless refinement. Introducing only a small amount of loss in halftoned test images, compression is increased by up to a factor of four compared with JBIG. Lossy, lossless......, and refinement decoding speed and lossless encoding speed are less than a factor of two slower than JBIG. The (de)coding method is proposed as part of JBIG2, an emerging international standard for lossless/lossy compression of bi-level images....

  6. Numerical solution of plasma fluid equations using locally refined grids

    International Nuclear Information System (INIS)

    Colella, P.

    1997-01-01

    This paper describes a numerical method for the solution of plasma fluid equations on block-structured, locally refined grids. The plasma under consideration is typical of those used for the processing of semiconductors. The governing equations consist of a drift-diffusion model of the electrons and an isothermal model of the ions coupled by Poisson's equation. A discretization of the equations is given for a uniform spatial grid, and a time-split integration scheme is developed. The algorithm is then extended to accommodate locally refined grids. This extension involves the advancement of the discrete system on a hierarchy of levels, each of which represents a degree of refinement, together with synchronization steps to ensure consistency across levels. A brief discussion of a software implementation is followed by a presentation of numerical results

  7. Detection of glass particles on bone lesions using SEM-EDS.

    Science.gov (United States)

    Montoriol, Romain; Guilbeau-Frugier, Céline; Chantalat, Elodie; Roumiguié, Mathieu; Delisle, Marie-Bernadette; Payré, Bruno; Telmon, Norbert; Savall, Frédéric

    2017-09-01

    The problem of identifying the wounding agent in forensic cases is recurrent. Moreover, when several tools are involved, distinguishing the origin of lesions can be difficult. Scanning electron microscopy (SEM)/energy dispersive X-ray analysis (EDS) equipment is increasingly available to the scientific and medical community, and some studies have reported its use in forensic anthropology. However, at our knowledge, no study has reported the use of SEM-EDS in forensic cases involving glass tools, whether in case reports or experiments. We performed an experimental study on human rib fragments, on which we manually created wounds using fragments of window and mirror glass. SEM-EDS was executed on samples without any further preparation on low vacuum mode, then on the same samples after defleshing them completely by boiling them. Window and mirror glass particles were detected on experimental wounds. Both had silica in their spectra, and the opaque side of the mirror contained titanium, allowing for their identification. Boiling and defleshing the bone samples involved a loss of information in terms of the number of wounds detected as positive for glass particles and in the number of glass particles detected, for both window and mirror glass. We suggest the analysis of wounds with suspected glass particles using low vacuum mode and with no defleshment by boiling.

  8. EXPTIME-Completeness of Thorough Refinement on Modal Transition Systems

    DEFF Research Database (Denmark)

    Beneš, Nikola; Křetínský, Jan; Larsen, Kim Guldstrand

    2012-01-01

    Modal transition systems (MTS), a specification formalism introduced more than 20 years ago, has recently received a considerable attention in several different areas. Many of the fundamental questions related to MTSs have already been answered. However, the problem of the exact computational...... complexity of thorough refinement checking between two finite MTSs remained unsolved. We settle down this question by showing EXPTIME-completeness of thorough refinement checking on finite MTSs. The upper-bound result relies on a novel algorithm running in single exponential time providing a direct goal...

  9. National oil companies' presence to hike US refining competition

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that the downstream segment of the U.S. petroleum business is virtually certain to become more competitive because of the growing presence of national oil companies in the country's refining industry. That's a forecast by New York investment firm Kidder Peabody. It cites a plan by Mexico's Petroleos Mexicanos (Pemex) to form a joint venture with Shell Oil Co. covering Shell's 225,000 b/d Deer Park, Tex., refinery as the latest example of national oil companies' movement into U.S. refining

  10. Limit of grain refinement during ECAP process. Temperature influence

    International Nuclear Information System (INIS)

    Chuvil'deev, V.N.; Kopylov, V.I.; Nokhrin, A.V.; Makarov, I.M.; Lopatin, Yu.G.

    2004-01-01

    Experimental and theoretical study results are reported for the process of deformation grain refinement under severe plastic deformation. A generalization is made for experimental study results on deformation dispersing of unalloyed metals and aluminium and magnesium base alloys. The model is built that allows calculating the value of minimum grain size attained by the method of equal-channel angular pressing. The expressions are derived which describe the dependence of grain refinement limit on the nature of material and the temperature of severe plastic deformation [ru

  11. Western Canadian crude oil supply and markets 2002-2010 : Executive summary

    International Nuclear Information System (INIS)

    2003-08-01

    The forecast of crude supply developed by the Canadian Association of Petroleum Producers (CAPP) indicates that additional pipeline capacity from western Canada to existing new markets will be required. A crude market study was undertaken to investigate and assess the potential development of the North American crude markets along with expected western Canadian crude supply growth. The results revealed that additional crude export capacity from Alberta will be required by 2006 or 2007. An analysis of three export pipeline scenarios was carried out: (1) Hardisty to Chicago, with a further extension to Cushing, Oklahoma, (2) Edmonton to the west coast of British Columbia, Prince Rupert, and (3) Hardisty to California. The most attractive aggregate benefits to heavy crude producers would result from a western export pipeline to British Columbia or California. A superior alternative is a pipeline to a deepwater tanker terminal on the coast of British Columbia. The Chicago pipeline option would become more attractive if Midwestern refiners were to expand their capacity to process heavy oil. Declining netbacks associated with sustained growth that is introduced into the market place are reflected in all scenarios over the forecast period until 2010. 1 tab., 23 figs

  12. Process technology for refining crude soybean oil – a product from ...

    African Journals Online (AJOL)

    Process technology for refining crude soybean oil – a product from soycake meal production in Ghana. ... yield of 83.3 per cent was recorded. Results of quality assessment of the final laboratory refined oil compared favourably with Ghana Standards Board's specification for edible soybean oil. Ghana Journal of Science Vol.

  13. Robust Refinement as Implemented in TOPAS

    Energy Technology Data Exchange (ETDEWEB)

    Stone, K.; Stephens, P

    2010-01-01

    A robust refinement procedure is implemented in the program TOPAS through an iterative reweighting of the data. Examples are given of the procedure as applied to fitting partially overlapped peaks by full and partial models and also of the structures of ibuprofen and acetaminophen in the presence of unmodeled impurity contributions

  14. EdF speaks about economic advantages of fuel reprocessing as compared with interim storage

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    The French company Electricite de France (EdF) will prefer nuclear fuel reprocessing and plutonium recycling to spent fuel storage also in the years after 2000. This option is economically advantageous if the proportional cost of reprocessing does not exceed 1900 FRF/kg heavy metal. Economic analysis shows that this is feasible. EdF will soon have to reprocess annually about 1000 Mt spent fuel to supply enough plutonium for MOX fuel fabrication to feed as many as 28 PWR units and the Superphenix reactor. Spent fuel reprocessing is seen as promising as long as the efficiency of the MOX fuel approaches that of natural uranium based fuel. The French national industrial, political and legal context of EdF operations is also considered. (P.A.)

  15. Experts: to crack down on violence in the ED, establish a robust system of reporting, educating staff.

    Science.gov (United States)

    2013-09-01

    Researchers say that most ED personnel will experience some form of physical or verbal violence at some point in their careers. However, when such incidents are regularly reported, the patients involved can be flagged in a hospital's computer system, making future events involving the same patients much less likely. Further, when ED personnel are alert to the clues that a patient or family member is becoming agitated, early intervention can usually prevent the situation from escalating to violence. About one-half of all ED personnel will experience a physical assault, and 97%-100% will experience verbal abuse during their careers, according to research. A first step in developing a strategy for dealing with violence is to educate ED personnel about what constitutes workplace violence so that all such incidents can be reported. Experts say many ED workers fail to recognize some instances of violence, based on the intent of the person involved. However, intent should not be a factor, they say. In many cases, empathy and good customer service skills can prevent tense situations from escalating to violence, but experts say that it is important to intervene at the first sign of agitation. ED administrators should gather input from frontline staff on how to most effectively derail instances of violence.

  16. A simple nodal force distribution method in refined finite element meshes

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jai Hak [Chungbuk National University, Chungju (Korea, Republic of); Shin, Kyu In [Gentec Co., Daejeon (Korea, Republic of); Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2017-05-15

    In finite element analyses, mesh refinement is frequently performed to obtain accurate stress or strain values or to accurately define the geometry. After mesh refinement, equivalent nodal forces should be calculated at the nodes in the refined mesh. If field variables and material properties are available at the integration points in each element, then the accurate equivalent nodal forces can be calculated using an adequate numerical integration. However, in certain circumstances, equivalent nodal forces cannot be calculated because field variable data are not available. In this study, a very simple nodal force distribution method was proposed. Nodal forces of the original finite element mesh are distributed to the nodes of refined meshes to satisfy the equilibrium conditions. The effect of element size should also be considered in determining the magnitude of the distributing nodal forces. A program was developed based on the proposed method, and several example problems were solved to verify the accuracy and effectiveness of the proposed method. From the results, accurate stress field can be recognized to be obtained from refined meshes using the proposed nodal force distribution method. In example problems, the difference between the obtained maximum stress and target stress value was less than 6 % in models with 8-node hexahedral elements and less than 1 % in models with 20-node hexahedral elements or 10-node tetrahedral elements.

  17. 3Drefine: an interactive web server for efficient protein structure refinement.

    Science.gov (United States)

    Bhattacharya, Debswapna; Nowotny, Jackson; Cao, Renzhi; Cheng, Jianlin

    2016-07-08

    3Drefine is an interactive web server for consistent and computationally efficient protein structure refinement with the capability to perform web-based statistical and visual analysis. The 3Drefine refinement protocol utilizes iterative optimization of hydrogen bonding network combined with atomic-level energy minimization on the optimized model using a composite physics and knowledge-based force fields for efficient protein structure refinement. The method has been extensively evaluated on blind CASP experiments as well as on large-scale and diverse benchmark datasets and exhibits consistent improvement over the initial structure in both global and local structural quality measures. The 3Drefine web server allows for convenient protein structure refinement through a text or file input submission, email notification, provided example submission and is freely available without any registration requirement. The server also provides comprehensive analysis of submissions through various energy and statistical feedback and interactive visualization of multiple refined models through the JSmol applet that is equipped with numerous protein model analysis tools. The web server has been extensively tested and used by many users. As a result, the 3Drefine web server conveniently provides a useful tool easily accessible to the community. The 3Drefine web server has been made publicly available at the URL: http://sysbio.rnet.missouri.edu/3Drefine/. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

  18. An adaptive grid refinement strategy for the simulation of negative streamers

    International Nuclear Information System (INIS)

    Montijn, C.; Hundsdorfer, W.; Ebert, U.

    2006-01-01

    The evolution of negative streamers during electric breakdown of a non-attaching gas can be described by a two-fluid model for electrons and positive ions. It consists of continuity equations for the charged particles including drift, diffusion and reaction in the local electric field, coupled to the Poisson equation for the electric potential. The model generates field enhancement and steep propagating ionization fronts at the tip of growing ionized filaments. An adaptive grid refinement method for the simulation of these structures is presented. It uses finite volume spatial discretizations and explicit time stepping, which allows the decoupling of the grids for the continuity equations from those for the Poisson equation. Standard refinement methods in which the refinement criterion is based on local error monitors fail due to the pulled character of the streamer front that propagates into a linearly unstable state. We present a refinement method which deals with all these features. Tests on one-dimensional streamer fronts as well as on three-dimensional streamers with cylindrical symmetry (hence effectively 2D for numerical purposes) are carried out successfully. Results on fine grids are presented, they show that such an adaptive grid method is needed to capture the streamer characteristics well. This refinement strategy enables us to adequately compute negative streamers in pure gases in the parameter regime where a physical instability appears: branching streamers

  19. Process for refining naphthalene, etc

    Energy Technology Data Exchange (ETDEWEB)

    Petroff, G

    1922-05-13

    A process is described for the refining of naphthalene, its distillates, and mineral oils by the use of dilute sulfuric acid, characterized in that the oils are oxidized with oxygen of the air and thereafter are treated with 65 to 75 percent sulfuric acid to separate the unsaturated hydrocarbons in the form of polymerized products whereby, if necessary, heating and application of usual or higher pressure can take place.

  20. Bauxite Mining and Alumina Refining

    OpenAIRE

    Donoghue, A. Michael; Frisch, Neale; Olney, David

    2014-01-01

    Objective: To describe bauxite mining and alumina refining processes and to outline the relevant physical, chemical, biological, ergonomic, and psychosocial health risks. Methods: Review article. Results: The most important risks relate to noise, ergonomics, trauma, and caustic soda splashes of the skin/eyes. Other risks of note relate to fatigue, heat, and solar ultraviolet and for some operations tropical diseases, venomous/dangerous animals, and remote locations. Exposures to bauxite dust,...

  1. Application of SEM/EDS to environmental geochemistry of heavy metals

    Directory of Open Access Journals (Sweden)

    Mateja Gosar

    2009-06-01

    Full Text Available Heavy metals represent a ubiquitous constituent of the near-surface environment, present in widely varyingconcentrations that typically have little impact on human behaviour and health. However, the mining of metals anduse of these metals in industrial processes has produced significant anthropogenic inputs of metals to both localand global environments. As such, a rigorous overview of the current accumulation of heavy metals and knowledgeof mineralogy of heavy metal-bearing phases is important for understanding their stability, solubility, mobility,bioavailability and toxicity. These data are of fundamental importance for environmental risk assessment and evaluationof future scenarios. Since conventional geochemical analyses provide limited information, other analyticalmethods have to be utilized for the characterisation of heavy metal-bearing phases. Significant analytical methodfor identification and characterisation of heavy metals in environmental media is a scanning electron microscopecoupled with energy dispersive X-ray spectrometer (SEM/EDS, an apparatus for qualitative and semi-quantitative chemical analysis at microne level, newly introduced to Geological Survey of Slovenia. Use of SEM/EDS was already introduced to environmental studies world-wide. In Slovenia, SEM/EDS analyses of environmental media werefirstly carried out on the Meža River stream sediments and snow deposits from Ljubljana urban area.Heavy metal-bearing phases in the Meža River stream sediments were apportioned to three source areas: Mežica mining/smelting area (geogenic-technogenic origin, Ravne ironworks area (technogenic origin and the Meža River catchment area (geogenic origin, which corresponds to data obtained by conventional geochemical and multivariate statistical methods. Airborne particles, identified in urban snow deposits, were interpreted as geogenic particles, represented by fragments of heavy metal-bearing minerals, and technogenic particles that

  2. SFESA: a web server for pairwise alignment refinement by secondary structure shifts.

    Science.gov (United States)

    Tong, Jing; Pei, Jimin; Grishin, Nick V

    2015-09-03

    Protein sequence alignment is essential for a variety of tasks such as homology modeling and active site prediction. Alignment errors remain the main cause of low-quality structure models. A bioinformatics tool to refine alignments is needed to make protein alignments more accurate. We developed the SFESA web server to refine pairwise protein sequence alignments. Compared to the previous version of SFESA, which required a set of 3D coordinates for a protein, the new server will search a sequence database for the closest homolog with an available 3D structure to be used as a template. For each alignment block defined by secondary structure elements in the template, SFESA evaluates alignment variants generated by local shifts and selects the best-scoring alignment variant. A scoring function that combines the sequence score of profile-profile comparison and the structure score of template-derived contact energy is used for evaluation of alignments. PROMALS pairwise alignments refined by SFESA are more accurate than those produced by current advanced alignment methods such as HHpred and CNFpred. In addition, SFESA also improves alignments generated by other software. SFESA is a web-based tool for alignment refinement, designed for researchers to compute, refine, and evaluate pairwise alignments with a combined sequence and structure scoring of alignment blocks. To our knowledge, the SFESA web server is the only tool that refines alignments by evaluating local shifts of secondary structure elements. The SFESA web server is available at http://prodata.swmed.edu/sfesa.

  3. The oil and petroleum industry. 20. ed.

    International Nuclear Information System (INIS)

    1992-01-01

    This financial survey is a compilation of financial and marketing data on oil and petroleum industry companies in the United Kingdom. It includes quoted companies in the production and distribution industry, unquoted companies in the exploration and production industry, unquoted companies in the refining and distribution industry, a geographical index and an alphabetical index. (UK)

  4. Reintroducing electrostatics into macromolecular crystallographic refinement: application to neutron crystallography and DNA hydration.

    Science.gov (United States)

    Fenn, Timothy D; Schnieders, Michael J; Mustyakimov, Marat; Wu, Chuanjie; Langan, Paul; Pande, Vijay S; Brunger, Axel T

    2011-04-13

    Most current crystallographic structure refinements augment the diffraction data with a priori information consisting of bond, angle, dihedral, planarity restraints, and atomic repulsion based on the Pauli exclusion principle. Yet, electrostatics and van der Waals attraction are physical forces that provide additional a priori information. Here, we assess the inclusion of electrostatics for the force field used for all-atom (including hydrogen) joint neutron/X-ray refinement. Two DNA and a protein crystal structure were refined against joint neutron/X-ray diffraction data sets using force fields without electrostatics or with electrostatics. Hydrogen-bond orientation/geometry favors the inclusion of electrostatics. Refinement of Z-DNA with electrostatics leads to a hypothesis for the entropic stabilization of Z-DNA that may partly explain the thermodynamics of converting the B form of DNA to its Z form. Thus, inclusion of electrostatics assists joint neutron/X-ray refinements, especially for placing and orienting hydrogen atoms. Copyright © 2011 Elsevier Ltd. All rights reserved.

  5. Introducing the Collaborative E-Learning Design Method (CoED)

    DEFF Research Database (Denmark)

    Ryberg, Thomas; Buus, Lillian; Nyvang, Tom

    2015-01-01

    In this chapter, a specific learning design method is introduced and explained, namely the Collaborative E-learning Design method (CoED), which has been developed through various projects in “e-Learning Lab – Centre for User Driven Innovation, Learning and Design” (Nyvang & Georgsen, 2007). We br...

  6. 40 CFR 80.245 - How does a small refiner apply for a sulfur baseline?

    Science.gov (United States)

    2010-07-01

    ... sulfur baseline? 80.245 Section 80.245 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Provisions § 80.245 How does a small refiner apply for a sulfur baseline? (a) Any refiner seeking small refiner status must apply for a refinery sulfur baseline by the deadline under § 80.235 for each of the...

  7. Refining of fossil resin flotation concentrate from western coal. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, G.F.; Miller, J.D.

    1995-02-16

    During the past several years, significant research efforts have been made to develop process technology for the selective flotation of fossil resin from western coals. As a result of these efforts, several new flotation technologies have been developed. Operation of a proof-of-concept continuous flotation circuit showed the selective flotation process to be sufficiently profitable to justify the development of a fossil resin industry. However, little attention has been given to the refining of the fossil resin flotation concentrate although solvent refining is a critical step for the fossil resin to become a marketable product. In view of this situation, DOE funded this two-year project to evaluate the following aspects of the fossil resin refining technology: 1) Characterization of the fossil resin flotation concentrate and its refined products; 2) Kinetics of fossil resin extraction; 3) Effects of operating variables on solvent extraction; 4) Extraction solvents; 5) Proof-of-concept continuous refining tests; and 6) Technical and economic analysis. The results from this research effort have led to the following conclusions: Hexane- or heptane-refined fossil resin has a light-yellow color, a melting point of 140 - 142{degrees}C, a density of 1.034 gram/cm, and good solubility in nonpolar solvents. Among the four solvents evaluated (hexane, heptane, toluene and ethyl acetate), hexane is the most appropriate solvent based on overall technical and economic considerations. Batch extraction tests and kinetic studies suggest that the main interaction between the resin and the solvent is expected to be the forces associated with solvation phenomena. Temperature has the most significant effect on extraction rate. With hexane as the solvent, a recovery of 90% cam be achieved at 50{degrees}C and 10% solids concentration with moderate agitation for 1 hour.

  8. Refined reservoir description to maximize oil recovery

    International Nuclear Information System (INIS)

    Flewitt, W.E.

    1975-01-01

    To assure maximized oil recovery from older pools, reservoir description has been advanced by fully integrating original open-hole logs and the recently introduced interpretive techniques made available through cased-hole wireline saturation logs. A refined reservoir description utilizing normalized original wireline porosity logs has been completed in the Judy Creek Beaverhill Lake ''A'' Pool, a reefal carbonate pool with current potential productivity of 100,000 BOPD and 188 active wells. Continuous porosity was documented within a reef rim and cap while discontinuous porous lenses characterized an interior lagoon. With the use of pulsed neutron logs and production data a separate water front and pressure response was recognized within discrete environmental units. The refined reservoir description aided in reservoir simulation model studies and quantifying pool performance. A pattern water flood has now replaced the original peripheral bottom water drive to maximize oil recovery

  9. Refined open intersection numbers and the Kontsevich-Penner matrix model

    Energy Technology Data Exchange (ETDEWEB)

    Alexandrov, Alexander [Center for Geometry and Physics, Institute for Basic Science (IBS),Pohang 37673 (Korea, Republic of); Centre de Recherches Mathématiques (CRM), Université de Montréal,Montréal (Canada); Department of Mathematics and Statistics, Concordia University,Montréal (Canada); Institute for Theoretical and Experimental Physics (ITEP),Moscow (Russian Federation); Buryak, Alexandr [Department of Mathematics, ETH Zurich, Zurich (Switzerland); Tessler, Ran J. [Institute for Theoretical Studies, ETH Zurich,Zurich (Switzerland)

    2017-03-23

    A study of the intersection theory on the moduli space of Riemann surfaces with boundary was recently initiated in a work of R. Pandharipande, J.P. Solomon and the third author, where they introduced open intersection numbers in genus 0. Their construction was later generalized to all genera by J.P. Solomon and the third author. In this paper we consider a refinement of the open intersection numbers by distinguishing contributions from surfaces with different numbers of boundary components, and we calculate all these numbers. We then construct a matrix model for the generating series of the refined open intersection numbers and conjecture that it is equivalent to the Kontsevich-Penner matrix model. An evidence for the conjecture is presented. Another refinement of the open intersection numbers, which describes the distribution of the boundary marked points on the boundary components, is also discussed.

  10. Refined open intersection numbers and the Kontsevich-Penner matrix model

    International Nuclear Information System (INIS)

    Alexandrov, Alexander; Buryak, Alexandr; Tessler, Ran J.

    2017-01-01

    A study of the intersection theory on the moduli space of Riemann surfaces with boundary was recently initiated in a work of R. Pandharipande, J.P. Solomon and the third author, where they introduced open intersection numbers in genus 0. Their construction was later generalized to all genera by J.P. Solomon and the third author. In this paper we consider a refinement of the open intersection numbers by distinguishing contributions from surfaces with different numbers of boundary components, and we calculate all these numbers. We then construct a matrix model for the generating series of the refined open intersection numbers and conjecture that it is equivalent to the Kontsevich-Penner matrix model. An evidence for the conjecture is presented. Another refinement of the open intersection numbers, which describes the distribution of the boundary marked points on the boundary components, is also discussed.

  11. State of European refining industry is less bleak than reported

    International Nuclear Information System (INIS)

    Jenkins, J.H.

    1997-01-01

    It is difficult to pick up a trade publication without reading of the imminent demise of the European refining industry. Major oil companies are combining operations to minimize costs. Refineries are being shuttered, and analysts are calling for the immediate closure of many more plants. There is little doubt that European cracking margins have fallen since the early 1990s, in step with the rest of the world. However, the refining industry in Europe does not, in the opinion of Pace Consultants Inc., suffer from some overriding fundamental flaw that dooms it to low margins forever. The intent of this article is to put some of the industry's recent events in perspective, to discuss some of the fundamental differences between American and European operations, and to perhaps lay to rest the idea that refining is somehow dead in Europe

  12. Automating crystallographic structure solution and refinement of protein–ligand complexes

    International Nuclear Information System (INIS)

    Echols, Nathaniel; Moriarty, Nigel W.; Klei, Herbert E.; Afonine, Pavel V.; Bunkóczi, Gábor; Headd, Jeffrey J.; McCoy, Airlie J.; Oeffner, Robert D.; Read, Randy J.; Terwilliger, Thomas C.; Adams, Paul D.

    2013-01-01

    A software system for automated protein–ligand crystallography has been implemented in the Phenix suite. This significantly reduces the manual effort required in high-throughput crystallographic studies. High-throughput drug-discovery and mechanistic studies often require the determination of multiple related crystal structures that only differ in the bound ligands, point mutations in the protein sequence and minor conformational changes. If performed manually, solution and refinement requires extensive repetition of the same tasks for each structure. To accelerate this process and minimize manual effort, a pipeline encompassing all stages of ligand building and refinement, starting from integrated and scaled diffraction intensities, has been implemented in Phenix. The resulting system is able to successfully solve and refine large collections of structures in parallel without extensive user intervention prior to the final stages of model completion and validation

  13. Error sensitivity to refinement: a criterion for optimal grid adaptation

    Science.gov (United States)

    Luchini, Paolo; Giannetti, Flavio; Citro, Vincenzo

    2017-12-01

    Most indicators used for automatic grid refinement are suboptimal, in the sense that they do not really minimize the global solution error. This paper concerns with a new indicator, related to the sensitivity map of global stability problems, suitable for an optimal grid refinement that minimizes the global solution error. The new criterion is derived from the properties of the adjoint operator and provides a map of the sensitivity of the global error (or its estimate) to a local mesh refinement. Examples are presented for both a scalar partial differential equation and for the system of Navier-Stokes equations. In the last case, we also present a grid-adaptation algorithm based on the new estimator and on the FreeFem++ software that improves the accuracy of the solution of almost two order of magnitude by redistributing the nodes of the initial computational mesh.

  14. Architectural Refinement for the Design of Survivable Systems

    National Research Council Canada - National Science Library

    Ellison, Robert

    2001-01-01

    This paper describes a process for systematically refining an enterprise system architecture to resist recognize and recover from deliberate, malicious attacks by applying reusable design primitives...

  15. Azione citodifferenziante ed antitumorale dell'acido ellagico

    OpenAIRE

    Vanella, Luca

    2011-01-01

    Il lavoro ha lo scopo di valutare l'effetto citodifferenziante ed antitumorale dell'acido ellagico in tre diverse linee cellulari prostatiche a diverso grado di invasivita' (DU145, LnCap, BPH1). I risultati della Cromogranina A e della P75 NGRF, ottenuti mediante immunofluorescenza, evidenziano un'azione citodifferenziante dell'acido ellagico in maniera dose dipendente. Inoltre i risultati dimostrano come l'acido ellagico abbia la capacita' di ridurre, in maniera dose dipendente, sia l'espres...

  16. Financial optimisation and risk management in refining activities

    International Nuclear Information System (INIS)

    Fiorenzani, S.

    2006-01-01

    The real options approach has become a benchmark in real assets evaluation and optimal management problems, especially in liberalised and competitive markets such as the oil and hydrocarbon markets. This paper describes how the same approach can be a useful tool for both risk management decisions and the financial optimisation problem. Refineries are black boxes, which can be used for the transformation of crude oil into more refined hydrocarbon products. These black boxes are characterised by operational flexibilities and constraints, which should be optimally managed in order to maximise the refiner's economic goals. Stochastic dynamic programming represents the right mathematical instrument employed to solve the decision-making problem in such an economic environment. (author)

  17. Pushing the dinosaurs[Competition in the refining industry

    Energy Technology Data Exchange (ETDEWEB)

    Cobb, C B [Ernst and Young/Wright Killen (United States)

    1999-03-01

    The need for change in the business of oil refining is expressed. Since 1981, only three years have yielded high profit margins. The future is said to be in maximising performance from existing assets. In the past, the industry focused on the asset-based strategy of refining crude and getting it into the pipelines as early as possible but apparently the future lies in identifying customer needs and satisfying those needs as quickly as possible. In other words, selling the most product at the highest price. The strategy and tactics for achieving these goals are itemised and discussed. In short, it is essential that oil and gas companies make the transformation from asset focus to customer focus. (UK)

  18. R and D status of oxide electro-refining reprocessing technology

    International Nuclear Information System (INIS)

    Myochin, Munetaka

    2005-01-01

    The oxide electro-refining pyrochemical reprocessing is excellent in the resistivity against nuclear material diversion and in the suitability for oxide fuel cycle and has an excellent affinity for the technology of fuel production using the vibropac method. The oxide electro-refining pyrochemical reprocessing system has therefore been examined as a part of studies of commercialization of FBR cycle. This report outlines the examination results of fundamental data acquired for the system design. (M.H.)

  19. Structure refinement of polycrystalline orthorhombic yttrium ...

    Indian Academy of Sciences (India)

    The perovskite ceramic phases with composition Ca1−YTiO3+ (where = 0.1, 0.2 and 0.3; hereafter CYT-10, CYT-20 and CYT-30) have been synthesized by solid state reaction at 1050°C. The structure refinement using general structure analysis system (GSAS) software converges to satisfactory profile indicators ...

  20. 40 CFR 80.551 - How does a refiner obtain approval as a small refiner under this subpart?

    Science.gov (United States)

    2010-07-01

    ...) Applications for motor vehicle diesel fuel small refiner status must be submitted to EPA by December 31, 2001...-operational between January 1, 1999, and January 1, 2000, the application for motor vehicle diesel fuel small...: (1) For motor vehicle diesel fuel small refiners— (i) A listing of the name and address of each...

  1. Uranium refining by solvent extraction

    International Nuclear Information System (INIS)

    Kraikaew, J.

    1996-01-01

    The yellow cake refining was studied in both laboratory and semi-pilot scales. The process units mainly consist of dissolution and filtration, solvent extraction, and precipitation and filtration. Effect of flow ratio (organic flow rate/ aqueous flow rate) on working efficiencies of solvent extraction process was studied. Detailed studies were carried out on extraction, scrubbing and stripping processes. Purity of yellow cake product obtained is high as 90.32% U 3 O 8

  2. Preparation of refined oils, etc

    Energy Technology Data Exchange (ETDEWEB)

    1931-02-03

    A process is disclosed for the preparation of refined sulfur-containing oils from sulfur-containing crude oils obtained by distillation of bituminous limestone, characterized by this crude oil being first subjected to a purification by distillation with steam in the known way, then treated with lime and chloride of lime and distilled preferably in the presence of zinc powder, whereby in this purification a rectification can be added for the purpose of recovering definite fractions.

  3. The Impact of Inpatient Boarding on ED Efficiency: A Discrete-Event Simulation Study

    OpenAIRE

    Bair, Aaron E.; Song, Wheyming T.; Chen, Yi-Chun; Morris, Beth A.

    2009-01-01

    In this study, a discrete-event simulation approach was used to model Emergency Department’s (ED) patient flow to investigate the effect of inpatient boarding on the ED efficiency in terms of the National Emergency Department Crowding Scale (NEDOCS) score and the rate of patients who leave without being seen (LWBS). The decision variable in this model was the boarder-released-ratio defined as the ratio of admitted patients whose boarding time is zero to all admitted patients. Our analysis sho...

  4. Refinements in the Los Alamos model of the prompt fission neutron spectrum

    Energy Technology Data Exchange (ETDEWEB)

    Madland, D.G., E-mail: dgm@lanl.gov; Kahler, A.C.

    2017-01-15

    This paper presents a number of refinements to the original Los Alamos model of the prompt fission neutron spectrum and average prompt neutron multiplicity as derived in 1982. The four refinements are due to new measurements of the spectrum and related fission observables many of which were not available in 1982. They are also due to a number of detailed studies and comparisons of the model with previous and present experimental results including not only the differential spectrum, but also integral cross sections measured in the field of the differential spectrum. The four refinements are (a) separate neutron contributions in binary fission, (b) departure from statistical equilibrium at scission, (c) fission-fragment nuclear level-density models, and (d) center-of-mass anisotropy. With these refinements, for the first time, good agreement has been obtained for both differential and integral measurements using the same Los Alamos model spectrum.

  5. Structural refinement and coarsening in deformed metals

    DEFF Research Database (Denmark)

    Hansen, N.; Huang, X.; Xing, Q.

    2005-01-01

    The microstructural refinement by plastic deformation is analysed in terms of key parameters, the spacing between and the misorientation angle across the boundaries subdividing the structure. Coarsening of such structures by annealing is also characterised. For both deformed and annealed structur...

  6. Refinement from a control problem to program

    DEFF Research Database (Denmark)

    Schenke, Michael; Ravn, Anders P.

    1996-01-01

    The distinguishing feature of the presented refinement approach is that it links formalisms from a top level requirements notation down to programs together in a mathematically coherent development trajectory. The approach uses Duration Calculus, a real-time interval logic, to specifyrequirements...

  7. Unstandardized Responses to a "Standardized" Test: The edTPA as Gatekeeper and Curriculum Change Agent

    Science.gov (United States)

    Ledwell, Katherine; Oyler, Celia

    2016-01-01

    We examine edTPA (a teacher performance assessment) implementation at one private university during the first year that our state required this exam for initial teaching certification. Using data from semi-structured interviews with 19 teacher educators from 12 programs as well as public information on edTPA pass rates, we explore whether the…

  8. Integrated Canada-U.S. Power Sector Modeling with the Regional Energy Deployment System (ReEDS)

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, A.; Eurek, K.; Mai, T.; Perry, A.

    2013-02-01

    The electric power system in North America is linked between the United States and Canada. Canada has historically been a net exporter of electricity to the United States. The extent to which this remains true will depend on the future evolution of power markets, technology deployment, and policies. To evaluate these and related questions, we modify the Regional Energy Deployment System (ReEDS) model to include an explicit representation of the grid-connected power system in Canada to the continental United States. ReEDS is unique among long-term capacity expansion models for its high spatial resolution and statistical treatment of the impact of variable renewable generation on capacity planning and dispatch. These unique traits are extended to new Canadian regions. We present example scenario results using the fully integrated Canada-U.S. version of ReEDS to demonstrate model capabilities. The newly developed, integrated Canada-U.S. ReEDS model can be used to analyze the dynamics of electricity transfers and other grid services between the two countries under different scenarios.

  9. Refinement of NMR structures using implicit solvent and advanced sampling techniques.

    Science.gov (United States)

    Chen, Jianhan; Im, Wonpil; Brooks, Charles L

    2004-12-15

    NMR biomolecular structure calculations exploit simulated annealing methods for conformational sampling and require a relatively high level of redundancy in the experimental restraints to determine quality three-dimensional structures. Recent advances in generalized Born (GB) implicit solvent models should make it possible to combine information from both experimental measurements and accurate empirical force fields to improve the quality of NMR-derived structures. In this paper, we study the influence of implicit solvent on the refinement of protein NMR structures and identify an optimal protocol of utilizing these improved force fields. To do so, we carry out structure refinement experiments for model proteins with published NMR structures using full NMR restraints and subsets of them. We also investigate the application of advanced sampling techniques to NMR structure refinement. Similar to the observations of Xia et al. (J.Biomol. NMR 2002, 22, 317-331), we find that the impact of implicit solvent is rather small when there is a sufficient number of experimental restraints (such as in the final stage of NMR structure determination), whether implicit solvent is used throughout the calculation or only in the final refinement step. The application of advanced sampling techniques also seems to have minimal impact in this case. However, when the experimental data are limited, we demonstrate that refinement with implicit solvent can substantially improve the quality of the structures. In particular, when combined with an advanced sampling technique, the replica exchange (REX) method, near-native structures can be rapidly moved toward the native basin. The REX method provides both enhanced sampling and automatic selection of the most native-like (lowest energy) structures. An optimal protocol based on our studies first generates an ensemble of initial structures that maximally satisfy the available experimental data with conventional NMR software using a simplified

  10. Should we fear "flu fear" itself? Effects of H1N1 influenza fear on ED use.

    Science.gov (United States)

    McDonnell, William M; Nelson, Douglas S; Schunk, Jeff E

    2012-02-01

    Surges in patient volumes compromise emergency departments' (EDs') ability to deliver care, as shown by the recent H1N1 influenza (flu) epidemic. Media reports are important in informing the public about health threats, but the effects of media-induced anxiety on ED volumes are unclear. The aim of this study is to examine the effect of widespread public concern about flu on ED use. We reviewed ED data from an integrated health system operating 18 hospital EDs. We compared ED visits during three 1-week periods: (a) a period of heightened public concern regarding flu before the disease was present ("Fear Week"), (b) a subsequent period of active disease ("Flu Week"), and (c) a week before widespread concern ("Control Week"). Fear Week was identified from an analysis of statewide Google electronic searches for "swine flu" and from media announcements about flu. Flu Week was identified from statewide epidemiological data. Data were reviewed from 22 608 visits during the study periods. Fear Week (n = 7712) and Flu Week (n = 7687) were compared to Control Week (n = 7209). Fear Week showed a 7.0% increase in visits (95% confidence interval, 6-8). Pediatric visits increased by 19.7%, whereas adult visits increased by 1%. Flu Week showed an increase over Control Week of 6.6% (95% confidence interval, 6-7). Pediatric visits increased by 10.6%, whereas adult visits increased by 4.8%. At a time of heightened public concern regarding flu but little disease prevalence, EDs experienced substantial increases in patient volumes. These increases were significant and comparable to the increases experienced during the subsequent epidemic of actual disease. Copyright © 2012 Elsevier Inc. All rights reserved.

  11. Use of a midstream clean catch mobile application did not lower urine contamination rates in an ED.

    Science.gov (United States)

    Jacob, Mary S; Kulie, Paige; Benedict, Cameron; Ordoobadi, Alexander J; Sikka, Neal; Steinmetz, Erika; McCarthy, Melissa L

    2018-01-01

    Urine microscopy is a common test performed in emergency departments (EDs). Urine specimens can easily become contaminated by different factors, including the collection method. The midstream clean-catch (MSCC) collection technique is commonly used to reduce urine contamination. The urine culture contamination rate from specimens collected in our ED is 30%. We developed an instructional application (app) to show ED patients how to provide a MSCC urine sample. We hypothesized that ED patients who viewed our instructional app would have significantly lower urine contamination rates compared to patients who did not. We prospectively enrolled 257 subjects with a urinalysis and/or urine culture test ordered in the ED and asked them to watch our MSCC instructional app. After prospective enrollment was complete, we retrospectively matched each enrolled subject to an ED patient who did not watch the instructional app. Controls were matched to cases based on gender, type of urine specimen provided, ED visit date and shift. Urinalysis and urine culture contamination results were compared between the matched pairs using McNemar's test. The overall urine culture contamination rate of the 514 subjects was 38%. The majority of the matched pairs had a urinalysis (63%) or urinalysis plus urine culture (35%) test done. There were no significant differences in our urine contamination rates between the matched pairs overall or when stratified by gender, by prior knowledge of the clean catch process or by type of urine specimen. We did not see a lower contamination rate for patients who viewed our instructional app compared to patients who did not. It is possible that MSCC is not effective for decreasing urine specimen contamination. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Poor Dietary Guidelines Compliance among Low-Income Women Eligible for Supplemental Nutrition Assistance Program-Education (SNAP-Ed

    Directory of Open Access Journals (Sweden)

    Shinyoung Jun

    2018-03-01

    Full Text Available The Supplemental Nutrition Assistance Program-Education (SNAP-Ed program aims to improve nutritional intakes of low-income individuals (<185% poverty threshold. The objective of this study was to describe the compliance with Dietary Guidelines for Americans (DGA recommendations for fruits, vegetables, and whole grains among SNAP-Ed eligible (n = 3142 and ineligible (n = 3168 adult women (19–70 years nationwide and SNAP-Ed participating women in Indiana (n = 2623, using the NHANES 2007–2012 and Indiana SNAP-Ed survey data, respectively. Sensitivity analysis further stratified women by race/ethnicity and by current SNAP participation (<130% poverty threshold. Nationally, lower-income women were less likely to meet the fruit (21% vs. 25% and vegetable (11% vs. 19% guidelines than higher-income women, but did not differ on whole grains, which were ~5% regardless of income. The income differences in fruit and vegetable intakes were driven by non-Hispanic whites. Fewer SNAP-Ed-eligible U.S. women met fruit (21% vs. 55% and whole grain (4% vs. 18% but did not differ for vegetable recommendations (11% vs. 9% when compared to Indiana SNAP-Ed women. This same trend was observed among current SNAP participants. Different racial/ethnic group relationships with DGA compliance were found in Indiana compared to the nation. Nevertheless, most low-income women in the U.S. are at risk of not meeting DGA recommendations for fruits (79%, vegetables (89%, and whole grains (96%; SNAP-Ed participants in Indiana had higher compliance with DGA recommendations. Increased consumption of these three critical food groups would improve nutrient density, likely reduce calorie consumption by replacing high calorie choices, and improve fiber intakes.

  13. Effect of Duration on Ti Grain Refinement of A356 and Melt Quality

    Science.gov (United States)

    Gürsoy, Özen; Erzi, Eray; Yüksel, Çağlar; Dispinar, Derya

    Grain refinement of aluminium alloys increases fluidity and feedability; and thus higher mechanical properties and decreased porosity is achieved. Typically, various ratios of Ti-B is used as grain refiner. It is well known that due to the sedimentation, the effectiveness of the grain refinement decreases which is called the fading effect. In this work, this effect has been investigated by means of melt quality. Two different melting temperatures were selected (725 and 750C) and samples were cast into die and sand mould. After the addition of grain refiners, samples were collected at 10 minutes of interval. Metallographic examinations were carried out where microstructural change and porosity distribution were investigated. The results were correlated with bifilm index (i.e. melt quality).

  14. Effects of grain refinement on the rheological behaviors of semisolid hypoeutectic Al-Si alloys

    International Nuclear Information System (INIS)

    Yan, M.; Luo, W.

    2007-01-01

    The paper experimentally investigated the effects of grain refinement on the rheological response of Al and hypoeutectic Al-Si alloys. Selected refiners included K 2 TiF 6 , K 2 TiF 6 plus graphite and Al-5Ti-B. The apparent viscosity of semisolid Al alloys was measured during solidification. Samples at different solid fractions were quenched to observe the microstructure. It was found that grain refinement drastically lowered the apparent viscosity of Al-Si alloys. Among selected refiners, the effect of Al-5Ti-B was the best. The effect of K 2 TiF 6 plus graphite was better than that of K 2 TiF 6 . Silicon contents in Al alloys affected the apparent viscosity. With increasing silicon content the apparent viscosity decreased, resulted from promotion of silicon to both refining effects of titanium and boron

  15. A new e-learning platform for radiology education (RadEd).

    Science.gov (United States)

    Xiberta, Pau; Boada, Imma

    2016-04-01

    One of the key elements of e-learning platforms is the content provided to the students. Content creation is a time demanding task that requires teachers to prepare material taking into account that it will be accessed on-line. Moreover, the teacher is restricted by the functionalities provided by the e-learning platforms. In contexts such as radiology where images have a key role, the required functionalities are still more specific and difficult to be provided by these platforms. Our purpose is to create a framework to make teacher's tasks easier, specially when he has to deal with contents where images have a main role. In this paper, we present RadEd, a new web-based teaching framework that integrates a smart editor to create case-based exercises that support image interaction such as changing the window width and the grey scale used to render the image, taking measurements on the image, attaching labels to images and selecting parts of the images, amongst others. It also provides functionalities to prepare courses with different topics, exercises and theory material, and also functionalities to control students' work. Different experts have used RadEd and all of them have considered it a very useful and valuable tool to prepare courses where radiological images are the main component. RadEd provides teachers functionalities to prepare more realistic cases and students the ability to make a more specific diagnosis. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  16. Effect of B/Ti mass ratio on grain refining of low-titanium aluminum produced by electrolysis

    International Nuclear Information System (INIS)

    Wang Mingxing; Wang Sanjun; Liu Zhiyong; Liu Zhongxia; Song Tianfu; Zuo Xiurong

    2006-01-01

    The effect of B/Ti mass ratio on grain refining of the low-titanium aluminum produced by electrolysis was investigated by adding AlB master alloy to the melt of the low-titanium aluminum. The results show that the addition of titanium by electrolysis is an effective way of grain refining of aluminum, and addition of boron to the melt of the low-titanium aluminum can further increase the grain refining efficiency. And the best grain refining efficiency is obtained when the B/Ti mass ratio is 1:10. However, when the B/Ti mass ratio is 1:2.22 (the stoichiometric value for TiB 2 ), the grain refining efficiency vanishes almost completely. It means that all of the solute titanium atoms in the melt of the low-titanium aluminum react with boron atoms that come from AlB master alloy to form TiB 2 particles, and TiB 2 particles have not grain refining ability. The grain refining efficiency seems to increase with addition of more boron to the melt after the B/Ti mass ratio exceeds 1:2.22. But the grain refining efficiency is very poor, and similar to that of pure Al refined by AlB master alloy. It further shows that TiB 2 particles do not participate in grain refining, and that the excess boron atoms in the melt also cannot turn TiB 2 particles into the effective nuclei for aluminum as the solute titanium atoms do

  17. Decadal climate prediction with a refined anomaly initialisation approach

    Science.gov (United States)

    Volpi, Danila; Guemas, Virginie; Doblas-Reyes, Francisco J.; Hawkins, Ed; Nichols, Nancy K.

    2017-03-01

    In decadal prediction, the objective is to exploit both the sources of predictability from the external radiative forcings and from the internal variability to provide the best possible climate information for the next decade. Predicting the climate system internal variability relies on initialising the climate model from observational estimates. We present a refined method of anomaly initialisation (AI) applied to the ocean and sea ice components of the global climate forecast model EC-Earth, with the following key innovations: (1) the use of a weight applied to the observed anomalies, in order to avoid the risk of introducing anomalies recorded in the observed climate, whose amplitude does not fit in the range of the internal variability generated by the model; (2) the AI of the ocean density, instead of calculating it from the anomaly initialised state of temperature and salinity. An experiment initialised with this refined AI method has been compared with a full field and standard AI experiment. Results show that the use of such refinements enhances the surface temperature skill over part of the North and South Atlantic, part of the South Pacific and the Mediterranean Sea for the first forecast year. However, part of such improvement is lost in the following forecast years. For the tropical Pacific surface temperature, the full field initialised experiment performs the best. The prediction of the Arctic sea-ice volume is improved by the refined AI method for the first three forecast years and the skill of the Atlantic multidecadal oscillation is significantly increased compared to a non-initialised forecast, along the whole forecast time.

  18. The Effect of Grain-refinement on Zn-10Al Alloy Damping Properties

    Directory of Open Access Journals (Sweden)

    Piwowarski G.

    2014-12-01

    Full Text Available The paper is devoted to grain-refinement of the medium-aluminium zinc based alloys (MAl-Zn. The system examined was sand cast Zn- 10 wt. %. Al binary alloy (Zn-10Al doped with commercial Al-3 wt. % Ti - 0.15 wt. % C grain refiner (Al-3Ti-0.15C GR. Basing on the measured attenuation coefficient of ultrasonic wave it was stated that together with significantly increased structure fineness damping decreases only by about 10 - 20%. The following examinations should establish the influence of the mentioned grain-refinement on strength and ductility of MAl-Zn cast alloys.

  19. Adaptive mesh refinement with spectral accuracy for magnetohydrodynamics in two space dimensions

    International Nuclear Information System (INIS)

    Rosenberg, D; Pouquet, A; Mininni, P D

    2007-01-01

    We examine the effect of accuracy of high-order spectral element methods, with or without adaptive mesh refinement (AMR), in the context of a classical configuration of magnetic reconnection in two space dimensions, the so-called Orszag-Tang (OT) vortex made up of a magnetic X-point centred on a stagnation point of the velocity. A recently developed spectral-element adaptive refinement incompressible magnetohydrodynamic (MHD) code is applied to simulate this problem. The MHD solver is explicit, and uses the Elsaesser formulation on high-order elements. It automatically takes advantage of the adaptive grid mechanics that have been described elsewhere in the fluid context (Rosenberg et al 2006 J. Comput. Phys. 215 59-80); the code allows both statically refined and dynamically refined grids. Tests of the algorithm using analytic solutions are described, and comparisons of the OT solutions with pseudo-spectral computations are performed. We demonstrate for moderate Reynolds numbers that the algorithms using both static and refined grids reproduce the pseudo-spectral solutions quite well. We show that low-order truncation-even with a comparable number of global degrees of freedom-fails to correctly model some strong (sup-norm) quantities in this problem, even though it satisfies adequately the weak (integrated) balance diagnostics

  20. Adaptive local surface refinement based on LR NURBS and its application to contact

    Science.gov (United States)

    Zimmermann, Christopher; Sauer, Roger A.

    2017-12-01

    A novel adaptive local surface refinement technique based on Locally Refined Non-Uniform Rational B-Splines (LR NURBS) is presented. LR NURBS can model complex geometries exactly and are the rational extension of LR B-splines. The local representation of the parameter space overcomes the drawback of non-existent local refinement in standard NURBS-based isogeometric analysis. For a convenient embedding into general finite element codes, the Bézier extraction operator for LR NURBS is formulated. An automatic remeshing technique is presented that allows adaptive local refinement and coarsening of LR NURBS. In this work, LR NURBS are applied to contact computations of 3D solids and membranes. For solids, LR NURBS-enriched finite elements are used to discretize the contact surfaces with LR NURBS finite elements, while the rest of the body is discretized by linear Lagrange finite elements. For membranes, the entire surface is discretized by LR NURBS. Various numerical examples are shown, and they demonstrate the benefit of using LR NURBS: Compared to uniform refinement, LR NURBS can achieve high accuracy at lower computational cost.

  1. The use of Fourier reverse transforms in crystallographic phase refinement

    Energy Technology Data Exchange (ETDEWEB)

    Ringrose, Sharon [Iowa State Univ., Ames, IA (United States)

    1997-10-08

    Often a crystallographer obtains an electron density map which shows only part of the structure. In such cases, the phasing of the trial model is poor enough that the electron density map may show peaks in some of the atomic positions, but other atomic positions are not visible. There may also be extraneous peaks present which are not due to atomic positions. A method for determination of crystal structures that have resisted solution through normal crystallographic methods has been developed. PHASER is a series of FORTRAN programs which aids in the structure solution of poorly phased electron density maps by refining the crystallographic phases. It facilitates the refinement of such poorly phased electron density maps for difficult structures which might otherwise not be solvable. The trial model, which serves as the starting point for the phase refinement, may be acquired by several routes such as direct methods or Patterson methods. Modifications are made to the reverse transform process based on several assumptions. First, the starting electron density map is modified based on the fact that physically the electron density map must be non-negative at all points. In practice a small positive cutoff is used. A reverse Fourier transform is computed based on the modified electron density map. Secondly, the authors assume that a better electron density map will result by using the observed magnitudes of the structure factors combined with the phases calculated in the reverse transform. After convergence has been reached, more atomic positions and less extraneous peaks are observed in the refined electron density map. The starting model need not be very large to achieve success with PHASER; successful phase refinement has been achieved with a starting model that consists of only 5% of the total scattering power of the full molecule. The second part of the thesis discusses three crystal structure determinations.

  2. Open digital badges in Open edX

    OpenAIRE

    Hickey, Daniel T.; Barba, Lorena A.; Lemoie, Kerri; Amigot, Michael; Ewens, Damian

    2014-01-01

    Slides for the presentation at the Open edX Conference, Cambridge, MA 2014.   This talk presented the first public update of our collaboration to implement open digital badges in Dr. Barba's new MOOC, "Practical Numerical Methods with Python." It's a collaboration between Indiana University's Center for Research on Learning and Technology (led by Prof. Daniel T. Hickey);  Prof. Lorena Barba and her team at George Washington University, with her partners at IBL Studios Education, and...

  3. Computing Refined Buneman Trees in Cubic Time

    DEFF Research Database (Denmark)

    Brodal, G.S.; Fagerberg, R.; Östlin, A.

    2003-01-01

    Reconstructing the evolutionary tree for a set of n species based on pairwise distances between the species is a fundamental problem in bioinformatics. Neighbor joining is a popular distance based tree reconstruction method. It always proposes fully resolved binary trees despite missing evidence...... in the underlying distance data. Distance based methods based on the theory of Buneman trees and refined Buneman trees avoid this problem by only proposing evolutionary trees whose edges satisfy a number of constraints. These trees might not be fully resolved but there is strong combinatorial evidence for each...... proposed edge. The currently best algorithm for computing the refined Buneman tree from a given distance measure has a running time of O(n 5) and a space consumption of O(n 4). In this paper, we present an algorithm with running time O(n 3) and space consumption O(n 2). The improved complexity of our...

  4. The Relationship Between the Use of a Worksite Medical Home and ED Visits or Hospitalizations

    Directory of Open Access Journals (Sweden)

    Marissa Stroo BS

    2015-10-01

    Full Text Available Worksite medical homes may be a good model for improving employee health. The aim of this study was to compare the likelihood of being seen in the emergency department (ED or being hospitalized by level of use (no use, occasional use, or primary care of a worksite medical home, overall and by type of user (employee, adult dependent, or pediatric dependent. This was a retrospective analysis of claims data, using covariate-adjusted logistic regression models for ED visits and inpatient hospitalizations. Secondary data for the years 2006 to 2008 from a company that offers an on-site health care center (HCC were used. Analyses were based on a data set that combines health plan claims and human resources demographic data. Overall, people who did not use the HCC were more likely to be seen in the ED (adjusted odds ratio [OR] = 1.20, 95% confidence interval or CI [1.06, 1.37], P = .005 or to be hospitalized (adjusted OR = 1.58; 95% CI [1.34, 1.86]; P < .0001 compared with those who used the HCC for primary care. Both ED visits and hospitalizations for employees and dependents in this study were lower among those who used the worksite medical home for primary care. Worksite medical homes can improve chronic disease management and thus reduce ED visits and hospitalizations. These findings contribute to growing evidence that worksite medical homes are potentially cost-effective.

  5. Why a disaster is not just normal business ramped up: Disaster response among ED nurses.

    Science.gov (United States)

    Hammad, Karen S; Arbon, Paul; Gebbie, Kristine; Hutton, Alison

    2017-11-15

    The emergency department (ED) is a familiar place for the emergency nurse who spends their working days inside it. A disaster threatens that familiarity and creates changes that make working in the ED during a disaster response different from the everyday experience of working in the ED. This research reports on an aspect of the findings from a larger study about the experience of working as a nurse in the ED during a disaster response. Thirteen nurses from 8 different countries were interviewed about their experience. The findings from this research demonstrate that a disaster event leads to a chain reaction of changes in process, space and practice. Nurses' respond to the news of a disaster event with shock and disbelief. The ED may change as a result of the event requiring nurses to work in an altered environment or a completely different setting. These changes provoke nurses to alter their behaviour and practice and reflect on the experience after the response. Emergency nurses have a high likelihood of participating in disaster response and as such should be adequately prepared. This highlights how disaster response is different and leads to recommendations to enhance training for emergency nurses which will better prepare them Disasterresponse is not normal business ramped up. There are a number of challenges and changes that should be considered when preparing emergency nurses for the realities of disaster response. Copyright © 2017 College of Emergency Nursing Australasia. All rights reserved.

  6. Factors affecting the grain-refinement of aluminum using titanium and boron additives

    International Nuclear Information System (INIS)

    Jones, G.P.; Pearson, J.

    1976-01-01

    The development of grain-refining techniques for the casting of aluminum, and the results achieved using additions of ternary Al--Ti--B master-alloys, are briefly described. A test procedure is given for assessing the relative effectiveness of these master-alloys, and the results are related to the various kinds of alloy treated, including those with constituents which poison the grain-refining agent. The equilibrium conditions which affect the behavior of the constituents of the grain-refined alloys are examined quantitatively from a thermodynamic viewpoint. One theory about the mechanism of nucleation of aluminum on titanium diboride is examined and found inapplicable. New data on the solubility of TiB 2 , ZrB 2 , TiC, ZrC, Cr 3 C 2 , and CrB 2 in liquid aluminum are presented graphically. Practical aspects of alloy behavior in grain-refining practice are analyzed and discussed on the basis of the quantitative data

  7. 78 FR 20176 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

    Science.gov (United States)

    2013-04-03

    ..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... renewable electricity production, refined coal production, and Indian coal production under section 45... resources, and to 2013 sales of refined coal and Indian coal produced in the United States or a possession...

  8. 77 FR 21835 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

    Science.gov (United States)

    2012-04-11

    ..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... electricity production, refined coal production, and Indian coal production under section 45. DATES: The 2012... sales of refined coal and Indian coal produced in the United States or a possession thereof. Inflation...

  9. Former Soviet Union's refining sector faces big shakeout

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The crisis gripping the refining sector in the former Soviet Union (FSU) is deepening as that industry faces massive rationalization and restructuring. Refinery runs in FSU republics have been on the decline for a number of years. Peak throughput occurred in 1987 at 9.69 million b/d. In Russia, however, the peak came in 1980 at 6.5 million b/d. Given current operable refining capacity in the FSU, now down to about 9.27 million b/d distributed among 48 refineries, capacity utilization will average only about 65% this year. The paper discusses worsening conditions, a comparison of the FSU declines, the financial crisis, energy consumption, and the focus of FSU refineries on secondary capacity to upgrade the product mix

  10. Calculating corrections in F-theory from refined BPS invariants and backreacted geometries

    Energy Technology Data Exchange (ETDEWEB)

    Poretschkin, Maximilian

    2015-07-01

    This thesis presents various corrections to F-theory compactifications which rely on the computation of refined Bogomol'nyi-Prasad-Sommerfield (BPS) invariants and the analysis of backreacted geometries. Detailed information about rigid supersymmetric theories in five dimensions is contained in an index counting refined BPS invariants. These BPS states fall into representations of SU(2){sub L} x SU(2){sub R}, the little group in five dimensions, which has an induced action on the cohomology of the moduli space of stable pairs. In the first part of this thesis, we present the computation of refined BPS state multiplicities associated to M-theory compactifications on local Calabi-Yau manifolds whose base is given by a del Pezzo or half K3 surface. For geometries with a toric realization we use an algorithm which is based on the Weierstrass normal form of the mirror geometry. In addition we use the refined holomorphic anomaly equation and the gap condition at the conifold locus in the moduli space in order to perform the direct integration and to fix the holomorphic ambiguity. In a second approach, we use the refined Goettsche formula and the refined modular anomaly equation that govern the (refined) genus expansion of the free energy of the half K3 surface. By this procedure, we compute the refined BPS invariants of the half K3 from which the results of the remaining del Pezzo surfaces are obtained by flop transitions and blow-downs. These calculations also make use of the high symmetry of the del Pezzo surfaces whose homology lattice contains the root lattice of exceptional Lie algebras. In cases where both approaches are applicable, we successfully check the compatibility of these two methods. In the second part of this thesis, we apply the results obtained from the calculation of the refined invariants of the del Pezzo respectively the half K3 surfaces to count non-perturbative objects in F-theory. The first application is given by BPS states of the E

  11. Webová aplikace v desktopovém prostředí

    OpenAIRE

    Bugáň, Marek

    2014-01-01

    Tato bakalářská práce by měla ukázat, jak se dá pracovat s webovými aplikacemi v destkopovém prostředí. Jsou zde popsány technologie, které se dají požít pro vývoj těchto aplikací. Jádrem práce je popsat a demonstrovat vývoj aplikací v prostředí Google Chrome API. This bachelor thesis shoul show us, how to work with web application in desktop environment. It show us, wthch technologies we can use for development of this kind of application. The aim of thesis is to describe and demonstrate ...

  12. Architectural Refinement for the Design of Survivable Systems

    National Research Council Canada - National Science Library

    Ellison, Robert

    2001-01-01

    ...; that is, have no central administration and no unified security policy. The survivable architecture refinement is an iterative risk-driven process which adopts the structure of Boehm's Spiral Model Boehm 88...

  13. Book Review: John M. Hobson and Leonard Seabrooke (2007) (eds) Everyday Politics of the World Economy

    DEFF Research Database (Denmark)

    Strange, Michael Stewart

    2009-01-01

    Book Review: John M. Hobson and Leonard Seabrooke (2007) (eds) Everyday Politics of the World Economy (Cambridge: Cambridge University Press), 254pp. Udgivelsesdato: 2009......Book Review: John M. Hobson and Leonard Seabrooke (2007) (eds) Everyday Politics of the World Economy (Cambridge: Cambridge University Press), 254pp. Udgivelsesdato: 2009...

  14. Exercise training improves erectile dysfunction (ED) in patients with metabolic syndrome on phosphodiesterase-5 (PDE-5) inhibitors.

    Science.gov (United States)

    Maresca, Luigi; D'Agostino, Mariantonietta; Castaldo, Luigi; Vitelli, Alessandra; Mancini, Maria; Torella, Giorgio; Lucci, Rosa; Albano, Giovanna; Del Forno, Domenico; Ferro, Matteo; Altieri, Vincenzo; Giallauria, Francesco; Vigorito, Carlo

    2013-12-01

    Erectile dysfunction (ED) affects about 50% of males aged 40-70 years old. ED shares with atherosclerotic disease several common risk factors; therefore, it may be considered a surrogate marker of atherosclerosis. Since phosphodiesterase-5 inhibitors are well known pharmacologic agents capable of significant improvement in ED, we designed this study to evaluate whether exercise training is of added value in patients with ED who are already on PDE-5 inhibitors. We recruited 20 male patients affected by ED with metabolic syndrome. At baseline, all patients underwent Cardio-Pulmonary Exercise Testing (CPET) and the International Index of Erectile Function (IIEF) test. After the initial evaluation, patients were subdivided into two groups: tadalafil group (group T, n = 10), who were maintained only on tadalafil therapy, and a tadalafil/exercise training group (T/E group, n = 10) who continued tadalafil but in addition underwent a2-month structured exercise training program. Basal anthropometric characteristics of study population showed no significant differences. Although both-groups showed at 2 months an improvement of the IIEF score, this was more evident in the T/E group (T group: 11.2 vs 14.2, P = 0.02; T/E group: 10.8 vs 20.1, P exercise (VO(2peak)) only in the T/E group patients (T group: 13.63 +/- 2.03 vs 14.24 +/- 2.98 mL/kg/min; P = 0.521; T/E group: 13.41 +/- 2.97 vs 16.58 +/- 3.17 mL/kg/min; P = 0.006). A significant correlation was found between the changes in VO(2peak) and the modifications in IIEF score (r = 0.575; P = 0.001). Exercise training in ED patients treated with PDE-5 inhibitors is of added value since further improves ED, as evaluated by IIEF score, and increases functional capacity.

  15. Melt refining of uranium contaminated copper, nickel, and mild steel

    International Nuclear Information System (INIS)

    Ren Xinwen; Liu Wencang; Zhang Yuan

    1993-01-01

    This paper presents the experiment results on melt refining of uranium contaminated metallic discards such as copper, nickel, and mild steel. Based on recommended processes, uranium contents in ingots shall decrease below 1 ppm; metal recovery is higher than 96%; and slag production is below 5% in weight of the metal to be refined. The uranium in the slag is homogeneously distributed. The slag seems to be hard ceramics, insoluble in water, and can be directly disposed of after proper packaging

  16. A State Space Model for the Wood Chip Refining Model

    Directory of Open Access Journals (Sweden)

    David Di Ruscio

    1997-07-01

    Full Text Available A detailed dynamic model of the fibre size distribution between the refiner discs, distributed along the refiner radius, is presented. Both one- and two-dimensional descriptions for the fibre or shive geometry are given. It is shown that this model may be simplified and that analytic solutions exist under non-restrictive assumptions. A direct method for the recursive estimation of unknown parameters is presented. This method is applicable to linear or linearized systems which have a triangular structure.

  17. Reverse mechanical after effect during hydrogenation of zone refined iron

    Energy Technology Data Exchange (ETDEWEB)

    Spivak, L.V.; Skryabina, N.E.; Kurmaeva, L.D.; Smirnov, L.V. (Permskij Gosudarstvennyj Univ. (USSR); AN SSSR, Sverdlovsk. Inst. Fiziki Metallov)

    1984-12-01

    The relationship between the process of hydrogenation and the reverse mechanical after effect (RMA) microplastic deformation in the zone refined iron has been studied. Metallographic investigations and mechanical testing of the samples hydrogenated under torsional strain have been performed. It is shown that in the zone refined iron the formation of voids responsible for irreversible hydrogen embrittlement does not occur, but the hydrogen-initiated RMA strain is conserved, i. e. the RMA effects are independent of the presence of discontinuities.

  18. Risk as economic category: systematics scientific approach and refinement contents

    OpenAIRE

    V.G. Vygovskyy

    2015-01-01

    The paper studies the categorical-conceptual apparatus of risk and its refinement based on a critical analysis of existing systematic scientific approaches. Determined that in the refinement of the economic nature of the risk of a number of controversial issues: the definition of the objective or subjective nature of risk; matching of concepts such as «risk», «danger», «loss», «probability of loss»; definition of negative or positive consequences of risk; identification of risk with its conse...

  19. Is There a Future for Teacher Ed Curriculum? An Answer from History and Moral Philosophy

    Science.gov (United States)

    Null, J. Wesley

    2008-01-01

    Is there a future for teacher ed "curriculum"? The author contends that he is not sure if there is a future for teacher ed curriculum, but if such a future is to exist, the answer will come only from history and moral philosophy. In this article, the author opines that individuals cannot make good decisions about the future of teacher ed…

  20. Performance of the modified Richmond Agitation Sedation Scale in identifying delirium  in older ED patients.

    Science.gov (United States)

    Grossmann, Florian F; Hasemann, Wolfgang; Kressig, Reto W; Bingisser, Roland; Nickel, Christian H

    2017-09-01

    Delirium in older emergency department (ED) patients is associated with severe negative patient outcomes and its detection is challenging for ED clinicians. ED clinicians need easy tools for delirium detection. We aimed to test the performance criteria of the modified Richmond Agitation Sedation Scale (mRASS) in identifying delirium in older ED patients. The mRASS was applied to a sample of consecutive ED patients aged 65 or older by specially trained nurses during an 11-day period in November 2015. Reference standard delirium diagnosis was based on Diagnostic and Statistical Manual of Mental Disorders (DSM-IV-TR) criteria, and was established by geriatricians. Performance criteria were computed. Analyses were repeated in the subsamples of patients with and without dementia. Of 285 patients, 20 (7.0%) had delirium and 41 (14.4%) had dementia. The sensitivity of an mRASS other than 0 to detect delirium was 0.70 (95% confidence interval, CI, 0.48; 0.85), specificity 0.93 (95% CI 0.90; 0.96), positive likelihood ratio 10.31 (95% CI 6.06; 17.51), negative likelihood ratio 0.32 (95% CI 0.16; 0.63). In the sub-sample of patients with dementia, sensitivity was 0.55 (95% CI 0.28; 0.79), specificity 0.83 (95% CI 0.66; 0.93), positive likelihood ratio 3.27 (95% CI 1.25; 8.59), negative likelihood ratio 0.55 (95% CI 0.28; 1.06). The sensitivity of the mRASS to detect delirium in older ED patients was low, especially in patients with dementia. Therefore its usefulness as a stand-alone screening tool is limited. Copyright © 2017 Elsevier Inc. All rights reserved.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.