US monitoring and verification technology: on-site inspection experience and future challenges

International Nuclear Information System (INIS)

Gullickson, R.L.; Carlson, D.; Ingraham, J.; Laird, B.

2013-01-01

The United States has a long and successful history of cooperation with treaty partners in monitoring and verification. For strategic arms reduction treaties, our collaboration has resulted in the development and application of systems with limited complexity and intrusiveness. As we progress beyond New START (NST) along the 'road to zero', the reduced number of nuclear weapons is likely to require increased confidence in monitoring and verification techniques. This may place increased demands on the technology to verify the presence of a nuclear weapon and even confirm the presence of a certain type. Simultaneously, this technology must include the ability to protect each treaty partner's sensitive nuclear weapons information. Mutual development of this technology by treaty partners offers the best approach for acceptance in treaty negotiations. This same approach of mutual cooperation and development is essential for developing nuclear test monitoring technology in support of the Comprehensive Nuclear Test Ban Treaty (CTBT). Our ability to detect low yield and evasive testing will be enhanced through mutually developed techniques and experiments using laboratory laser experiments and high explosives tests in a variety of locations and geologies. (authors)

Effects of economic classroom experiments on economic knowledge and reasoning in secondary education

NARCIS (Netherlands)

Grol, R.F.; Sent, E.-M.; Vries, B. de

2016-01-01

This study explored whether and how economic classroom experiments may enhance the economic knowledge and the reasoning ability of 108 secondary school students. Economic classroom experiments are controlled interactive learning exercises by means of which students can learn to think as economists.

Formal verification of algorithms for critical systems

Science.gov (United States)

Rushby, John M.; Von Henke, Friedrich

1993-01-01

We describe our experience with formal, machine-checked verification of algorithms for critical applications, concentrating on a Byzantine fault-tolerant algorithm for synchronizing the clocks in the replicated computers of a digital flight control system. First, we explain the problems encountered in unsynchronized systems and the necessity, and criticality, of fault-tolerant synchronization. We give an overview of one such algorithm, and of the arguments for its correctness. Next, we describe a verification of the algorithm that we performed using our EHDM system for formal specification and verification. We indicate the errors we found in the published analysis of the algorithm, and other benefits that we derived from the verification. Based on our experience, we derive some key requirements for a formal specification and verification system adequate to the task of verifying algorithms of the type considered. Finally, we summarize our conclusions regarding the benefits of formal verification in this domain, and the capabilities required of verification systems in order to realize those benefits.

Formal Verification of Continuous Systems

DEFF Research Database (Denmark)

Sloth, Christoffer

2012-01-01

and the verification procedures should be algorithmically synthesizable. Autonomous control plays an important role in many safety-critical systems. This implies that a malfunction in the control system can have catastrophic consequences, e.g., in space applications where a design flaw can result in large economic...... losses. Furthermore, a malfunction in the control system of a surgical robot may cause death of patients. The previous examples involve complex systems that are required to operate according to complex specifications. The systems cannot be formally verified by modern verification techniques, due...

The design of verification regimes

International Nuclear Information System (INIS)

Gallagher, N.W.

1991-01-01

Verification of a nuclear agreement requires more than knowledge of relevant technologies and institutional arrangements. It also demands thorough understanding of the nature of verification and the politics of verification design. Arms control efforts have been stymied in the past because key players agreed to verification in principle, only to disagree radically over verification in practice. In this chapter, it is shown that the success and stability of arms control endeavors can be undermined by verification designs which promote unilateral rather than cooperative approaches to security, and which may reduce, rather than enhance, the security of both sides. Drawing on logical analysis and practical lessons from previous superpower verification experience, this chapter summarizes the logic and politics of verification and suggests implications for South Asia. The discussion begins by determining what properties all forms of verification have in common, regardless of the participants or the substance and form of their agreement. Viewing verification as the political process of making decisions regarding the occurrence of cooperation points to four critical components: (1) determination of principles, (2) information gathering, (3) analysis and (4) projection. It is shown that verification arrangements differ primarily in regards to how effectively and by whom these four stages are carried out

Experiences in Building Python Automation Framework for Verification and Data Collections

Directory of Open Access Journals (Sweden)

2010-09-01

Full Text Available

This paper describes our experiences in building a Python automation framework. Specifically, the automation framework is used to support verification and data collection scripts. The scripts control various test equipments in addition to the device under test (DUT to characterize a specific performance with a specific configuration or to evaluate the correctness of the behaviour of the DUT. The specific focus on this paper is on documenting our experiences in building an automation framework using Python: on the purposes, goals and the benefits, rather than on a tutorial of how to build such a framework.

Experience in non-proliferation verification: The Treaty of Raratonga

International Nuclear Information System (INIS)

Walker, R.A.

1998-01-01

The verification provisions of the Treaty of Raratonga are subdivided into two categories: those performed by IAEA and those performed by other entities. A final provision of the Treaty of Raratonga is relevant to IAEA safeguards according to support of the continued effectiveness of the international non-proliferation system based on the Non-proliferation Treaty and the IAEA safeguards system. The non-IAEA verification process is described as well

Application verification research of cloud computing technology in the field of real time aerospace experiment

Science.gov (United States)

Wan, Junwei; Chen, Hongyan; Zhao, Jing

2017-08-01

According to the requirements of real-time, reliability and safety for aerospace experiment, the single center cloud computing technology application verification platform is constructed. At the IAAS level, the feasibility of the cloud computing technology be applied to the field of aerospace experiment is tested and verified. Based on the analysis of the test results, a preliminary conclusion is obtained: Cloud computing platform can be applied to the aerospace experiment computing intensive business. For I/O intensive business, it is recommended to use the traditional physical machine.

Verification and the safeguards legacy

International Nuclear Information System (INIS)

Perricos, Demetrius

2001-01-01

A number of inspection or monitoring systems throughout the world over the last decades have been structured drawing upon the IAEA experience of setting up and operating its safeguards system. The first global verification system was born with the creation of the IAEA safeguards system, about 35 years ago. With the conclusion of the NPT in 1968, inspections were to be performed under safeguards agreements, concluded directly between the IAEA and non-nuclear weapon states parties to the Treaty. The IAEA developed the safeguards system within the limitations reflected in the Blue Book (INFCIRC 153), such as limitations of routine access by the inspectors to 'strategic points', including 'key measurement points', and the focusing of verification on declared nuclear material in declared installations. The system, based as it was on nuclear material accountancy. It was expected to detect a diversion of nuclear material with a high probability and within a given time and therefore determine also that there had been no diversion of nuclear material from peaceful purposes. The most vital element of any verification system is the inspector. Technology can assist but cannot replace the inspector in the field. Their experience, knowledge, intuition and initiative are invaluable factors contributing to the success of any inspection regime. The IAEA inspectors are however not part of an international police force that will intervene to prevent a violation taking place. To be credible they should be technically qualified with substantial experience in industry or in research and development before they are recruited. An extensive training program has to make sure that the inspectors retain their professional capabilities and that it provides them with new skills. Over the years, the inspectors and through them the safeguards verification system gained experience in: organization and management of large teams; examination of records and evaluation of material balances

Verification of Decision-Analytic Models for Health Economic Evaluations: An Overview.

Science.gov (United States)

Dasbach, Erik J; Elbasha, Elamin H

2017-07-01

Decision-analytic models for cost-effectiveness analysis are developed in a variety of software packages where the accuracy of the computer code is seldom verified. Although modeling guidelines recommend using state-of-the-art quality assurance and control methods for software engineering to verify models, the fields of pharmacoeconomics and health technology assessment (HTA) have yet to establish and adopt guidance on how to verify health and economic models. The objective of this paper is to introduce to our field the variety of methods the software engineering field uses to verify that software performs as expected. We identify how many of these methods can be incorporated in the development process of decision-analytic models in order to reduce errors and increase transparency. Given the breadth of methods used in software engineering, we recommend a more in-depth initiative to be undertaken (e.g., by an ISPOR-SMDM Task Force) to define the best practices for model verification in our field and to accelerate adoption. Establishing a general guidance for verifying models will benefit the pharmacoeconomics and HTA communities by increasing accuracy of computer programming, transparency, accessibility, sharing, understandability, and trust of models.

Economic abuse in Lebanon: experiences and perceptions.

Science.gov (United States)

Usta, Jinan; Makarem, Nisrine N; Habib, Rima R

2013-03-01

This article explores the experiences and perceptions of Lebanese women and men with economic abuse. Data were drawn from focus group discussions and face-to-face interviews with men, women and social workers. The findings reveal that Lebanese women experience many forms of economic abuse, including the withholding of earnings, restricted involvement in the labor force, and limited purchasing decisions. Inheritance laws and practices still favor men over women. Women tolerate economic abuse to avoid more serious forms of abuse and ensure family stability. Practical implications of the findings are presented.

Verification of RESRAD-build computer code, version 3.1

International Nuclear Information System (INIS)

2003-01-01

RESRAD-BUILD is a computer model for analyzing the radiological doses resulting from the remediation and occupancy of buildings contaminated with radioactive material. It is part of a family of codes that includes RESRAD, RESRAD-CHEM, RESRAD-RECYCLE, RESRAD-BASELINE, and RESRAD-ECORISK. The RESRAD-BUILD models were developed and codified by Argonne National Laboratory (ANL); version 1.5 of the code and the user's manual were publicly released in 1994. The original version of the code was written for the Microsoft DOS operating system. However, subsequent versions of the code were written for the Microsoft Windows operating system. The purpose of the present verification task (which includes validation as defined in the standard) is to provide an independent review of the latest version of RESRAD-BUILD under the guidance provided by ANSI/ANS-10.4 for verification and validation of existing computer programs. This approach consists of a posteriori V and V review which takes advantage of available program development products as well as user experience. The purpose, as specified in ANSI/ANS-10.4, is to determine whether the program produces valid responses when used to analyze problems within a specific domain of applications, and to document the level of verification. The culmination of these efforts is the production of this formal Verification Report. The first step in performing the verification of an existing program was the preparation of a Verification Review Plan. The review plan consisted of identifying: Reason(s) why a posteriori verification is to be performed; Scope and objectives for the level of verification selected; Development products to be used for the review; Availability and use of user experience; and Actions to be taken to supplement missing or unavailable development products. The purpose, scope and objectives for the level of verification selected are described in this section of the Verification Report. The development products that were used

Integrated Verification Experiment data collected as part of the Los Alamos National Laboratory's Source Region Program

Energy Technology Data Exchange (ETDEWEB)

Whitaker, R.W.; Noel, S.D.

1992-12-01

The summary report by Tom Weaver gives the overall background for the series of IVE (Integrated Verification Experiment) experiments including information on the full set of measurements made. This appendix presents details of the infrasound data for the and discusses certain aspects of a few special experiments. Prior to FY90, the emphasis of the Infrasound Program was on underground nuclear test (UGT) detection and yield estimation. During this time the Infrasound Program was a separate program at Los Alamos, and it was suggested to DOE/OAC that a regional infrasound network be established around NTS. The IVE experiments took place in a time frame that allowed simultaneous testing of possible network sites and examination of propagation in different directions. Whenever possible, infrasound stations were combined with seismic stations so that a large number could be efficiently fielded. The regional infrasound network was not pursued by DOE, as world events began to change the direction of verification toward non-proliferation. Starting in FY90 the infrasound activity became part of the Source Region Program which has a goal of understanding how energy is transported from the UGT to a variety of measurement locations.

Design verification methodology for a solenoid valve for industrial applications

International Nuclear Information System (INIS)

Park, Chang Dae; Lim, Byung Ju; Chun, Kyung Yul

2015-01-01

Solenoid operated valves (SOV) are widely used in many applications due to their fast dynamic responses, cost effectiveness, and less contamination sensitive characteristics. In this paper, we tried to provide a convenient method of design verification of SOV to design engineers who depend on their experiences and experiment during design and development process of SOV. First, we summarize a detailed procedure for designing SOVs for industrial applications. All of the design constraints are defined in the first step of the design, and then the detail design procedure is presented based on design experiences as well as various physical and electromagnetic relationships. Secondly, we have suggested a verification method of this design using theoretical relationships, which enables optimal design of SOV from a point of view of safety factor of design attraction force. Lastly, experimental performance tests using several prototypes manufactured based on this design method show that the suggested design verification methodology is appropriate for designing new models of solenoids. We believe that this verification process is novel logic and useful to save time and expenses during development of SOV because verification tests with manufactured specimen may be substituted partly by this verification methodology.

Technical experiences of implementing a wireless tracking and facial biometric verification system for a clinical environment

Science.gov (United States)

Liu, Brent; Lee, Jasper; Documet, Jorge; Guo, Bing; King, Nelson; Huang, H. K.

2006-03-01

By implementing a tracking and verification system, clinical facilities can effectively monitor workflow and heighten information security in today's growing demand towards digital imaging informatics. This paper presents the technical design and implementation experiences encountered during the development of a Location Tracking and Verification System (LTVS) for a clinical environment. LTVS integrates facial biometrics with wireless tracking so that administrators can manage and monitor patient and staff through a web-based application. Implementation challenges fall into three main areas: 1) Development and Integration, 2) Calibration and Optimization of Wi-Fi Tracking System, and 3) Clinical Implementation. An initial prototype LTVS has been implemented within USC's Healthcare Consultation Center II Outpatient Facility, which currently has a fully digital imaging department environment with integrated HIS/RIS/PACS/VR (Voice Recognition).

Engineering a static verification tool for GPU kernels

OpenAIRE

Bardsley, E; Betts, A; Chong, N; Collingbourne, P; Deligiannis, P; Donaldson, AF; Ketema, J; Liew, D; Qadeer, S

2014-01-01

We report on practical experiences over the last 2.5 years related to the engineering of GPUVerify, a static verification tool for OpenCL and CUDA GPU kernels, plotting the progress of GPUVerify from a prototype to a fully functional and relatively efficient analysis tool. Our hope is that this experience report will serve the verification community by helping to inform future tooling efforts. ? 2014 Springer International Publishing.

Lessons Learned From Microkernel Verification — Specification is the New Bottleneck

Directory of Open Access Journals (Sweden)

Thorsten Bormer

2012-11-01

Full Text Available Software verification tools have become a lot more powerful in recent years. Even verification of large, complex systems is feasible, as demonstrated in the L4.verified and Verisoft XT projects. Still, functional verification of large software systems is rare – for reasons beyond the large scale of verification effort needed due to the size alone. In this paper we report on lessons learned for verification of large software systems based on the experience gained in microkernel verification in the Verisoft XT project. We discuss a number of issues that impede widespread introduction of formal verification in the software life-cycle process.

Expose : procedure and results of the joint experiment verification tests

Science.gov (United States)

Panitz, C.; Rettberg, P.; Horneck, G.; Rabbow, E.; Baglioni, P.

The International Space Station will carry the EXPOSE facility accommodated at the universal workplace URM-D located outside the Russian Service Module. The launch will be affected in 2005 and it is planned to stay in space for 1.5 years. The tray like structure will accomodate 2 chemical and 6 biological PI-experiments or experiment systems of the ROSE (Response of Organisms to Space Environment) consortium. EXPOSE will support long-term in situ studies of microbes in artificial meteorites, as well as of microbial communities from special ecological niches, such as endolithic and evaporitic ecosystems. The either vented or sealed experiment pockets will be covered by an optical filter system to control intensity and spectral range of solar UV irradiation. Control of sun exposure will be achieved by the use of individual shutters. To test the compatibility of the different biological systems and their adaptation to the opportunities and constraints of space conditions a profound ground support program has been developed. The procedure and first results of this joint Experiment Verification Tests (EVT) will be presented. The results will be essential for the success of the EXPOSE mission and have been done in parallel with the development and construction of the final hardware design of the facility. The results of the mission will contribute to the understanding of the organic chemistry processes in space, the biological adaptation strategies to extreme conditions, e.g. on early Earth and Mars, and the distribution of life beyond its planet of origin.

Secure optical verification using dual phase-only correlation

International Nuclear Information System (INIS)

Liu, Wei; Liu, Shutian; Zhang, Yan; Xie, Zhenwei; Liu, Zhengjun

2015-01-01

We introduce a security-enhanced optical verification system using dual phase-only correlation based on a novel correlation algorithm. By employing a nonlinear encoding, the inherent locks of the verification system are obtained in real-valued random distributions, and the identity keys assigned to authorized users are designed as pure phases. The verification process is implemented in two-step correlation, so only authorized identity keys can output the discriminate auto-correlation and cross-correlation signals that satisfy the reset threshold values. Compared with the traditional phase-only-correlation-based verification systems, a higher security level against counterfeiting and collisions are obtained, which is demonstrated by cryptanalysis using known attacks, such as the known-plaintext attack and the chosen-plaintext attack. Optical experiments as well as necessary numerical simulations are carried out to support the proposed verification method. (paper)

Symposium on international safeguards: Verification and nuclear material security. Book of extended synopses

International Nuclear Information System (INIS)

2001-01-01

The symposium covered the topics related to international safeguards, verification and nuclear materials security, namely: verification and nuclear material security; the NPT regime: progress and promises; the Additional Protocol as an important tool for the strengthening of the safeguards system; the nuclear threat and the nuclear threat initiative. Eighteen sessions dealt with the following subjects: the evolution of IAEA safeguards (including strengthened safeguards, present and future challenges; verification of correctness and completeness of initial declarations; implementation of the Additional Protocol, progress and experience; security of material; nuclear disarmament and ongoing monitoring and verification in Iraq; evolution of IAEA verification in relation to nuclear disarmament); integrated safeguards; physical protection and illicit trafficking; destructive analysis for safeguards; the additional protocol; innovative safeguards approaches; IAEA verification and nuclear disarmament; environmental sampling; safeguards experience; safeguards equipment; panel discussion on development of state systems of accountancy and control; information analysis in the strengthened safeguard system; satellite imagery and remote monitoring; emerging IAEA safeguards issues; verification technology for nuclear disarmament; the IAEA and the future of nuclear verification and security

Symposium on international safeguards: Verification and nuclear material security. Book of extended synopses

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The symposium covered the topics related to international safeguards, verification and nuclear materials security, namely: verification and nuclear material security; the NPT regime: progress and promises; the Additional Protocol as an important tool for the strengthening of the safeguards system; the nuclear threat and the nuclear threat initiative. Eighteen sessions dealt with the following subjects: the evolution of IAEA safeguards (including strengthened safeguards, present and future challenges; verification of correctness and completeness of initial declarations; implementation of the Additional Protocol, progress and experience; security of material; nuclear disarmament and ongoing monitoring and verification in Iraq; evolution of IAEA verification in relation to nuclear disarmament); integrated safeguards; physical protection and illicit trafficking; destructive analysis for safeguards; the additional protocol; innovative safeguards approaches; IAEA verification and nuclear disarmament; environmental sampling; safeguards experience; safeguards equipment; panel discussion on development of state systems of accountancy and control; information analysis in the strengthened safeguard system; satellite imagery and remote monitoring; emerging IAEA safeguards issues; verification technology for nuclear disarmament; the IAEA and the future of nuclear verification and security.

Verification and validation benchmarks.

Energy Technology Data Exchange (ETDEWEB)

Oberkampf, William Louis; Trucano, Timothy Guy

2007-02-01

Verification and validation (V&V) are the primary means to assess the accuracy and reliability of computational simulations. V&V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V&V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the level of

[Thought Experiments of Economic Surplus: Science and Economy in Ernst Mach's Epistemology].

Science.gov (United States)

Wulz, Monika

2015-03-01

Thought Experiments of Economic Surplus: Science and Economy in Ernst Mach's Epistemology. Thought experiments are an important element in Ernst Mach's epistemology: They facilitate amplifying our knowledge by experimenting with thoughts; they thus exceed the empirical experience and suspend the quest for immediate utility. In an economical perspective, Mach suggested that thought experiments depended on the production of an economic surplus based on the division of labor relieving the struggle for survival of the individual. Thus, as frequently emphasized, in Mach's epistemology, not only the 'economy of thought' is an important feature; instead, also the socioeconomic conditions of science play a decisive role. The paper discusses the mental and social economic aspects of experimental thinking in Mach's epistemology and examines those within the contemporary evolutionary, physiological, and economic contexts. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Remote age verification to prevent underage alcohol sales. First results from Dutch liquor stores and the economic viability of national adoption.

Science.gov (United States)

van Hoof, Joris J; van Velthoven, Ben C J

2015-04-01

Alcohol consumption among minors is a popular topic in the public health debate, also in the Netherlands. Compliance with the legal age limits for selling alcohol proves to be rather low. Some Dutch liquor stores (outlets with an exclusive license to sell off-premise drinks with 15% alcohol or more) have recently adopted a remote age verification system. This paper discusses the first results of the use of the system. We use data from 67 liquor stores that adopted Ageviewers, a remote age verification system, in 2011. A remote validator judges the customer's age using camera footage and asks for an ID if there is any doubt. The system then sends a signal to the cash register, which approves or rejects the alcohol purchase. From the 367346 purchase attempts in the database, 8374 were rejected or aborted for age-related reasons. This figure amounts to an average ratio of 1.12 underage alcohol purchase attempts per sales day in each participating liquor store. Scaling up to a national level, the figures suggest at least 1 million underage alcohol purchase attempts per year in Dutch liquor stores. Underage alcohol purchases can be prevented by the nationwide adoption of remote age verification. However, given the lax enforcement of the age limits by the government, adopting such a system on a voluntary basis is generally not in the economic interest of the liquor stores. Obligatory installation of the system in off-premise alcohol outlets may pass a social cost-benefit test if certain conditions are fulfilled. Copyright © 2014 Elsevier B.V. All rights reserved.

Gender differences in economic experiments

Directory of Open Access Journals (Sweden)

Jürgen Ergun, Selim

2012-03-01

Full Text Available This paper reviews the experimental economics literature on gender differences concerning four salient subjects: risk aversion, trust, deception and leadership. We review both experiments conducted in a laboratory and field experiments. We summarize very briefly the main characteristics of the experiments we review and point out the main results related to gender differences. The vast majority of the articles we have revised document gender differences in behavior; differences which could be explained by sex-role stereotypes which could be formed even in early stages of life and/or hormonal differences such as the female hormone oxytocin or estrogen.

Este artículo revisa la literatura en el área de economía experimental sobre las diferencias de género en cuatro temas destacados: aversión al riesgo, confianza, engaño y liderazgo. Se revisan tanto experimentos realizados en laboratorios como experimentos de campo. Resumimos brevemente las principales características de los experimentos que consideramos y señalamos los principales resultados relacionados con las diferencias de género. La gran mayoría de los artículos que hemos revisado documentan diferencias de género en el comportamiento. Estas diferencias podrían explicarse por los estereotipos de roles sexuales que podrían formarse incluso en edades tempranas y / o diferencias hormonales como la hormona femenina oxitocina, o el estrógeno.

Class 1E software verification and validation: Past, present, and future

Energy Technology Data Exchange (ETDEWEB)

Persons, W.L.; Lawrence, J.D.

1993-10-01

This paper discusses work in progress that addresses software verification and validation (V&V) as it takes place during the full software life cycle of safety-critical software. The paper begins with a brief overview of the task description and discussion of the historical evolution of software V&V. A new perspective is presented which shows the entire verification and validation process from the viewpoints of a software developer, product assurance engineer, independent V&V auditor, and government regulator. An account of the experience of the field test of the Verification Audit Plan and Report generated from the V&V Guidelines is presented along with sample checklists and lessons learned from the verification audit experience. Then, an approach to automating the V&V Guidelines is introduced. The paper concludes with a glossary and bibliography.

Taxes and free economic zones: Russian practice and China experience

Directory of Open Access Journals (Sweden)

V. E. Shibanov

2016-01-01

Full Text Available Special economic zone – the tool of regional policy of the state used in regions where increase of an economic and social level of development is required, and questions of application of tax benefits and preferences in the territory of a special economic zone acquire special relevance. The purpose of this article is research of the questions concerning the mode of the taxation of special economic zones. In Russia still there is no consensus about the sizes and the special economic zone types, the mechanism of their activity and approach to management. Development of uniform methodology is necessary for the Russian legislation for effective creation of activity of special economic zones taking into account features of a territorial arrangement. This methodology can be developed on the basis of positive experience of functioning of free economic zones of the different countries of the world. In the real work with the help of economic and statistical methods data on development and results of activity of a special economic zone in the territory of the Russian Federation and the China are collected and considered. As an example of successful functioning of the Russian special economic zone the special economic zone "Alabuga" is considered, as an example of functioning in the territory of the China special economic zone Shenzhen and joint industrial park of China and Singapore in the city of Suzhou are considered. The analysis of experience of the China has allowed to draw conclusions on efficiency of development of certain territories of the China through introduction of special economic zones. This fact substantially depends on efficiency of mechanisms of creation and development of economic educations, a possibility of self-government and financial independence in these territories, attraction of the foreign investment capital. There aren't enough these mechanisms in functioning of the Russian special economic zones where concept special

Symposium on international safeguards: Verification and nuclear material security. Book of extended synopses. Addendum

International Nuclear Information System (INIS)

2001-01-01

The symposium covered the topics related to international safeguards, verification and nuclear materials security, namely: verification and nuclear material security; the NPT regime: progress and promises; the Additional Protocol as an important tool for the strengthening of the safeguards system; the nuclear threat and the nuclear threat initiative. Eighteen sessions dealt with the following subjects: the evolution of IAEA safeguards ( including strengthened safeguards, present and future challenges; verification of correctness and completeness of initial declarations; implementation of the Additional Protocol, progress and experience; security of material; nuclear disarmament and ongoing monitoring and verification in Iraq; evolution of IAEA verification in relation to nuclear disarmament); integrated safeguards; physical protection and illicit trafficking; destructive analysis for safeguards; the additional protocol; innovative safeguards approaches; IAEA verification and nuclear disarmament; environmental sampling; safeguards experience; safeguards equipment; panel discussion on development of state systems of accountancy and control; information analysis in the strengthened safeguard system; satellite imagery and remote monitoring; emerging IAEA safeguards issues; verification technology for nuclear disarmament; the IAEA and the future of nuclear verification and security

BEval: A Plug-in to Extend Atelier B with Current Verification Technologies

Directory of Open Access Journals (Sweden)

Valério Medeiros Jr.

2014-01-01

Full Text Available This paper presents BEval, an extension of Atelier B to improve automation in the verification activities in the B method or Event-B. It combines a tool for managing and verifying software projects (Atelier B and a model checker/animator (ProB so that the verification conditions generated in the former are evaluated with the latter. In our experiments, the two main verification strategies (manual and automatic showed significant improvement as ProB's evaluator proves complementary to Atelier B built-in provers. We conducted experiments with the B model of a micro-controller instruction set; several verification conditions, that we were not able to discharge automatically or manually with AtelierB's provers, were automatically verified using BEval.

Cognitive Bias in Systems Verification

Science.gov (United States)

Larson, Steve

2012-01-01

Working definition of cognitive bias: Patterns by which information is sought and interpreted that can lead to systematic errors in decisions. Cognitive bias is used in diverse fields: Economics, Politics, Intelligence, Marketing, to name a few. Attempts to ground cognitive science in physical characteristics of the cognitive apparatus exceed our knowledge. Studies based on correlations; strict cause and effect is difficult to pinpoint. Effects cited in the paper and discussed here have been replicated many times over, and appear sound. Many biases have been described, but it is still unclear whether they are all distinct. There may only be a handful of fundamental biases, which manifest in various ways. Bias can effect system verification in many ways . Overconfidence -> Questionable decisions to deploy. Availability -> Inability to conceive critical tests. Representativeness -> Overinterpretation of results. Positive Test Strategies -> Confirmation bias. Debiasing at individual level very difficult. The potential effect of bias on the verification process can be managed, but not eliminated. Worth considering at key points in the process.

Class 1E software verification and validation: Past, present, and future

International Nuclear Information System (INIS)

Persons, W.L.; Lawrence, J.D.

1993-10-01

This paper discusses work in progress that addresses software verification and validation (V ampersand V) as it takes place during the full software life cycle of safety-critical software. The paper begins with a brief overview of the task description and discussion of the historical evolution of software V ampersand V. A new perspective is presented which shows the entire verification and validation process from the viewpoints of a software developer, product assurance engineer, independent V ampersand V auditor, and government regulator. An account of the experience of the field test of the Verification Audit Plan and Report generated from the V ampersand V Guidelines is presented along with sample checklists and lessons learned from the verification audit experience. Then, an approach to automating the V ampersand V Guidelines is introduced. The paper concludes with a glossary and bibliography

Class 1E software verification and validation: Past, present, and future

International Nuclear Information System (INIS)

Persons, W.L.; Lawrence, J.D.

1994-01-01

This paper discusses work in progress that addresses software verification and validation (V ampersand V) as it takes place during the full software life cycle of safety-critical software. The paper begins with a brief overview of the task description and discussion of the historical evolution of software V ampersand V. A new perspective is presented which shows the entire verification and validation process from the viewpoints of a software developer, product assurance engineer, independent V ampersand V auditor, and government regulator. An account of the experience of the field test of the Verification Audit Plan and Report generated from the V ampersand V Guidelines is presented along with sample checklists and lessons learned from the verification audit experience. Then, an approach to automating the V ampersand V Guidelines is introduced. The paper concludes with a glossary and bibliography

Using Field Experiments to Change the Template of How We Teach Economics

Science.gov (United States)

List, John A.

2014-01-01

In this article, the author explains why field experiments can improve what we teach and how we teach economics. Economists no longer operate as passive observers of economic phenomena. Instead, they participate actively in the research process by collecting data from field experiments to investigate the economics of everyday life. This change can…

The predictors of economic sophistication: media, interpersonal communication and negative economic experiences

NARCIS (Netherlands)

Kalogeropoulos, A.; Albæk, E.; de Vreese, C.H.; van Dalen, A.

2015-01-01

In analogy to political sophistication, it is imperative that citizens have a certain level of economic sophistication, especially in times of heated debates about the economy. This study examines the impact of different influences (media, interpersonal communication and personal experiences) on

A Dream Experiment in Development Economics

Science.gov (United States)

Singh, Prakarsh; Russo, Alexa

2013-01-01

In this article, the authors discuss a unique project carried out by 13 teams of four students each in the undergraduate Development Economics class during the 2012 spring semester at a private liberal arts college. The goal of the "Dream Experiment" was to think of an idea that promotes development, employs concepts from development…

Verification and validation benchmarks

International Nuclear Information System (INIS)

Oberkampf, William Louis; Trucano, Timothy Guy

2007-01-01

Verification and validation (V and V) are the primary means to assess the accuracy and reliability of computational simulations. V and V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V and V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the

Verification and validation benchmarks

International Nuclear Information System (INIS)

Oberkampf, William L.; Trucano, Timothy G.

2008-01-01

Verification and validation (V and V) are the primary means to assess the accuracy and reliability of computational simulations. V and V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V and V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the

Field Experiments in Behavioral and Public Economics

OpenAIRE

Bhanot, Syon Pandya

2015-01-01

The three essays in this dissertation present field experiments exploring phenomena in behavioral and public economics in real-world settings. The first essay outlines a field experiment that uses mailers with peer rank information to motivate water conservation. The essay contributes some of the first pieces of evidence on how comparisons with specific peers might influence behavior. The main finding is that while competitive framing of peer information has positive impacts on efficient h...

Verification of 3-D generation code package for neutronic calculations of WWERs

International Nuclear Information System (INIS)

Sidorenko, V.D.; Aleshin, S.S.; Bolobov, P.A.; Bolshagin, S.N.; Lazarenko, A.P.; Markov, A.V.; Morozov, V.V.; Syslov, A.A.; Tsvetkov, V.M.

2000-01-01

Materials on verification of the 3 -d generation code package for WWERs neutronic calculations are presented. The package includes: - spectral code TVS-M; - 2-D fine mesh diffusion code PERMAK-A for 4- or 6-group calculation of WWER core burnup; - 3-D coarse mesh diffusion code BIPR-7A for 2-group calculations of quasi-stationary WWERs regimes. The materials include both TVS-M verification data and verification data on PERMAK-A and BIPR-7A codes using constant libraries generated with TVS-M. All materials are related to the fuel without Gd. TVS-M verification materials include results of comparison both with benchmark calculations obtained by other codes and with experiments carried out at ZR-6 critical facility. PERMAK-A verification materials contain results of comparison with TVS-M calculations and with ZR-6 experiments. BIPR-7A materials include comparison with operation data for Dukovany-2 and Loviisa-1 NPPs (WWER-440) and for Balakovo NPP Unit 4 (WWER-1000). The verification materials demonstrate rather good accuracy of calculations obtained with the use of code package of the 3 -d generation. (Authors)

Verification and validation in computational fluid dynamics

Science.gov (United States)

Oberkampf, William L.; Trucano, Timothy G.

2002-04-01

Verification and validation (V&V) are the primary means to assess accuracy and reliability in computational simulations. This paper presents an extensive review of the literature in V&V in computational fluid dynamics (CFD), discusses methods and procedures for assessing V&V, and develops a number of extensions to existing ideas. The review of the development of V&V terminology and methodology points out the contributions from members of the operations research, statistics, and CFD communities. Fundamental issues in V&V are addressed, such as code verification versus solution verification, model validation versus solution validation, the distinction between error and uncertainty, conceptual sources of error and uncertainty, and the relationship between validation and prediction. The fundamental strategy of verification is the identification and quantification of errors in the computational model and its solution. In verification activities, the accuracy of a computational solution is primarily measured relative to two types of highly accurate solutions: analytical solutions and highly accurate numerical solutions. Methods for determining the accuracy of numerical solutions are presented and the importance of software testing during verification activities is emphasized. The fundamental strategy of validation is to assess how accurately the computational results compare with the experimental data, with quantified error and uncertainty estimates for both. This strategy employs a hierarchical methodology that segregates and simplifies the physical and coupling phenomena involved in the complex engineering system of interest. A hypersonic cruise missile is used as an example of how this hierarchical structure is formulated. The discussion of validation assessment also encompasses a number of other important topics. A set of guidelines is proposed for designing and conducting validation experiments, supported by an explanation of how validation experiments are different

Verification of the Korsar code on results of experiments executed on the PSB-VVER facility

International Nuclear Information System (INIS)

Roginskaya, V.L.; Pylev, S.S.; Elkin, I.V.

2005-01-01

Full text of publication follows: Paper represents some results of computational research executed within the framework of verification of the KORSAR thermal hydraulic code. This code was designed in the NITI by A.P. Aleksandrov (Russia). The general purpose of the work was development of a nodding scheme of the PSB-VVER integral facility, scheme testing and computational modelling of the experiment 'The PSB-VVER Natural Circulation Test With Stepwise Reduction of the Primary Inventory'. The NC test has been performed within the framework of the OECD PSB-VVER Project (task no. 3). This Project is focused upon the provision of experimental data for codes assessment with regard to VVER analysis. Paper presents a nodding scheme of the PSB-VVER facility and results of pre- and post-test calculations of the specified experiment, obtained with the KORSAR code. The experiment data and the KORSAR pre-test calculation results are in good agreement. A post-test calculation of the experiment with KORSAR code has been performed in order to assess the code capability to simulate the phenomena relevant to the test. The code showed a reasonable prediction of the phenomena measured in the experiment. (authors)

Verification of the Korsar code on results of experiments executed on the PSB-VVER facility

Energy Technology Data Exchange (ETDEWEB)

Roginskaya, V.L.; Pylev, S.S.; Elkin, I.V. [NSI RRC ' Kurchatov Institute' , Kurchatov Sq., 1, Moscow, 123182 (Russian Federation)

2005-07-01

Full text of publication follows: Paper represents some results of computational research executed within the framework of verification of the KORSAR thermal hydraulic code. This code was designed in the NITI by A.P. Aleksandrov (Russia). The general purpose of the work was development of a nodding scheme of the PSB-VVER integral facility, scheme testing and computational modelling of the experiment 'The PSB-VVER Natural Circulation Test With Stepwise Reduction of the Primary Inventory'. The NC test has been performed within the framework of the OECD PSB-VVER Project (task no. 3). This Project is focused upon the provision of experimental data for codes assessment with regard to VVER analysis. Paper presents a nodding scheme of the PSB-VVER facility and results of pre- and post-test calculations of the specified experiment, obtained with the KORSAR code. The experiment data and the KORSAR pre-test calculation results are in good agreement. A post-test calculation of the experiment with KORSAR code has been performed in order to assess the code capability to simulate the phenomena relevant to the test. The code showed a reasonable prediction of the phenomena measured in the experiment. (authors)

Verification of Chemical Weapons Destruction

International Nuclear Information System (INIS)

Lodding, J.

2010-01-01

The Chemical Weapons Convention is the only multilateral treaty that bans completely an entire category of weapons of mass destruction under international verification arrangements. Possessor States, i.e. those that have chemical weapons stockpiles at the time of becoming party to the CWC, commit to destroying these. All States undertake never to acquire chemical weapons and not to help other States acquire such weapons. The CWC foresees time-bound chemical disarmament. The deadlines for destruction for early entrants to the CWC are provided in the treaty. For late entrants, the Conference of States Parties intervenes to set destruction deadlines. One of the unique features of the CWC is thus the regime for verifying destruction of chemical weapons. But how can you design a system for verification at military sites, while protecting military restricted information? What degree of assurance is considered sufficient in such circumstances? How do you divide the verification costs? How do you deal with production capability and initial declarations of existing stockpiles? The founders of the CWC had to address these and other challenges in designing the treaty. Further refinement of the verification system has followed since the treaty opened for signature in 1993 and since inspection work was initiated following entry-into-force of the treaty in 1997. Most of this work concerns destruction at the two large possessor States, Russia and the United States. Perhaps some of the lessons learned from the OPCW experience may be instructive in a future verification regime for nuclear weapons. (author)

Verification of atmospheric diffusion models using data of long term atmospheric diffusion experiments

International Nuclear Information System (INIS)

Tamura, Junji; Kido, Hiroko; Hato, Shinji; Homma, Toshimitsu

2009-03-01

Straight-line or segmented plume models as atmospheric diffusion models are commonly used in probabilistic accident consequence assessment (PCA) codes due to cost and time savings. The PCA code, OSCAAR developed by Japan Atomic Energy Research Institute (Present; Japan Atomic Energy Agency) uses the variable puff trajectory model to calculate atmospheric transport and dispersion of released radionuclides. In order to investigate uncertainties involved with the structure of the atmospheric dispersion/deposition model in OSCAAR, we have introduced the more sophisticated computer codes that included regional meteorological models RAMS and atmospheric transport model HYPACT, which were developed by Colorado State University, and comparative analyses between OSCAAR and RAMS/HYPACT have been performed. In this study, model verification of OSCAAR and RAMS/HYPACT was conducted using data of long term atmospheric diffusion experiments, which were carried out in Tokai-mura, Ibaraki-ken. The predictions by models and the results of the atmospheric diffusion experiments indicated relatively good agreements. And it was shown that model performance of OSCAAR was the same degree as it of RAMS/HYPACT. (author)

Advanced verification topics

CERN Document Server

Bhattacharya, Bishnupriya; Hall, Gary; Heaton, Nick; Kashai, Yaron; Khan Neyaz; Kirshenbaum, Zeev; Shneydor, Efrat

2011-01-01

The Accellera Universal Verification Methodology (UVM) standard is architected to scale, but verification is growing and in more than just the digital design dimension. It is growing in the SoC dimension to include low-power and mixed-signal and the system integration dimension to include multi-language support and acceleration. These items and others all contribute to the quality of the SOC so the Metric-Driven Verification (MDV) methodology is needed to unify it all into a coherent verification plan. This book is for verification engineers and managers familiar with the UVM and the benefits it brings to digital verification but who also need to tackle specialized tasks. It is also written for the SoC project manager that is tasked with building an efficient worldwide team. While the task continues to become more complex, Advanced Verification Topics describes methodologies outside of the Accellera UVM standard, but that build on it, to provide a way for SoC teams to stay productive and profitable.

Simulation environment based on the Universal Verification Methodology

International Nuclear Information System (INIS)

Fiergolski, A.

2017-01-01

Universal Verification Methodology (UVM) is a standardized approach of verifying integrated circuit designs, targeting a Coverage-Driven Verification (CDV). It combines automatic test generation, self-checking testbenches, and coverage metrics to indicate progress in the design verification. The flow of the CDV differs from the traditional directed-testing approach. With the CDV, a testbench developer, by setting the verification goals, starts with an structured plan. Those goals are targeted further by a developed testbench, which generates legal stimuli and sends them to a device under test (DUT). The progress is measured by coverage monitors added to the simulation environment. In this way, the non-exercised functionality can be identified. Moreover, the additional scoreboards indicate undesired DUT behaviour. Such verification environments were developed for three recent ASIC and FPGA projects which have successfully implemented the new work-flow: (1) the CLICpix2 65 nm CMOS hybrid pixel readout ASIC design; (2) the C3PD 180 nm HV-CMOS active sensor ASIC design; (3) the FPGA-based DAQ system of the CLICpix chip. This paper, based on the experience from the above projects, introduces briefly UVM and presents a set of tips and advices applicable at different stages of the verification process-cycle.

Measuring the Economic Value of Pre-MBA Work Experience

Science.gov (United States)

Yeaple, Ronald N.; Johnston, Mark W.; Whittingham, Keith L.

2010-01-01

Pre-MBA work experience is required for admission to many graduate schools of business. In the present study, MBA graduates with a wide range of pre-MBA work experience were surveyed to assess the economic value of such work experience. No evidence was found of a systematic financial advantage to students from working for several years before…

The Economics of Information: A Classroom Experiment.

Science.gov (United States)

Netusil, Noelwah R.; Haupert, Michael

1995-01-01

Describes an economics class experiment where students ranked the quality of baked pies according to limited information. The limited sets of information included brand name and packaging only, price only, advertising only, word-of-mouth, and taste test. Discusses signals of quality and consumer decisions. (MJP)

Verification study of the FORE-2M nuclear/thermal-hydraulilc analysis computer code

International Nuclear Information System (INIS)

Coffield, R.D.; Tang, Y.S.; Markley, R.A.

1982-01-01

The verification of the LMFBR core transient performance code, FORE-2M, was performed in two steps. Different components of the computation (individual models) were verified by comparing with analytical solutions and with results obtained from other conventionally accepted computer codes (e.g., TRUMP, LIFE, etc.). For verification of the integral computation method of the code, experimental data in TREAT, SEFOR and natural circulation experiments in EBR-II were compared with the code calculations. Good agreement was obtained for both of these steps. Confirmation of the code verification for undercooling transients is provided by comparisons with the recent FFTF natural circulation experiments. (orig.)

Verification of a Fissile Material Cut-off Treaty (FMCT): The Potential Role of the IAEA

International Nuclear Information System (INIS)

Chung, Jin Ho

2016-01-01

The objective of a future verification of a FMCT(Fissile Material Cut-off Treaty) is to deter and detect non-compliance with treaty obligations in a timely and non-discriminatory manner with regard to banning the production of fissile material for nuclear weapons or other nuclear devices. Since the International Atomic Energy Agency (IAEA) has already established the IAEA safeguards as a verification system mainly for Non -Nuclear Weapon States (NNWSs), it is expected that the IAEA's experience and expertise in this field will make a significant contribution to setting up a future treaty's verification regime. This paper is designed to explore the potential role of the IAEA in verifying the future treaty by analyzing verification abilities of the Agency in terms of treaty verification and expected challenges. Furthermore, the concept of multilateral verification that could be facilitated by the IAEA will be examined as a measure of providing a credible assurance of compliance with a future treaty. In this circumstance, it is necessary for the IAEA to be prepared for playing a leading role in FMCT verifications as a form of multilateral verification by taking advantage of its existing verification concepts, methods, and tools. Also, several challenges that the Agency faces today need to be overcome, including dealing with sensitive and proliferative information, attribution of fissile materials, lack of verification experience in military fuel cycle facilities, and different attitude and culture towards verification between NWSs and NNWSs

Verification of a Fissile Material Cut-off Treaty (FMCT): The Potential Role of the IAEA

Energy Technology Data Exchange (ETDEWEB)

Chung, Jin Ho [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

2016-05-15

The objective of a future verification of a FMCT(Fissile Material Cut-off Treaty) is to deter and detect non-compliance with treaty obligations in a timely and non-discriminatory manner with regard to banning the production of fissile material for nuclear weapons or other nuclear devices. Since the International Atomic Energy Agency (IAEA) has already established the IAEA safeguards as a verification system mainly for Non -Nuclear Weapon States (NNWSs), it is expected that the IAEA's experience and expertise in this field will make a significant contribution to setting up a future treaty's verification regime. This paper is designed to explore the potential role of the IAEA in verifying the future treaty by analyzing verification abilities of the Agency in terms of treaty verification and expected challenges. Furthermore, the concept of multilateral verification that could be facilitated by the IAEA will be examined as a measure of providing a credible assurance of compliance with a future treaty. In this circumstance, it is necessary for the IAEA to be prepared for playing a leading role in FMCT verifications as a form of multilateral verification by taking advantage of its existing verification concepts, methods, and tools. Also, several challenges that the Agency faces today need to be overcome, including dealing with sensitive and proliferative information, attribution of fissile materials, lack of verification experience in military fuel cycle facilities, and different attitude and culture towards verification between NWSs and NNWSs.

Challenges for effective WMD verification

International Nuclear Information System (INIS)

Andemicael, B.

2006-01-01

already awash in fissile material and is increasingly threatened by the possible consequences of illicit trafficking in such material. The chemical field poses fewer problems. The ban on chemical weapons is a virtually complete post-Cold War regime, with state-of-the-art concepts and procedures of verification resulting from decades of negotiation. The detection of prohibited materials and activities is the common goal of the nuclear and chemical regimes for which the most intrusive and intensive procedures are activated by the three organizations. Accounting for the strictly peaceful application of dual-use items constitutes the bulk of the work of the inspectorates at the IAEA and the OPCW. A common challenge in both fields is the advance of science and technology in the vast nuclear and chemical industries and the ingenuity of some determined proliferators to deceive by concealing illicit activities under legitimate ones. Inspection procedures and technologies need to keep up with the requirement for flexibility and adaptation to change. The common objective of the three organizations is to assemble and analyze all relevant information in order to conclude reliably whether a State is or is not complying with its treaty obligations. The positive lessons learned from the IAEA's verification experience today are valuable in advancing concepts and technologies that might also benefit the other areas of WMD verification. Together with the emerging, more comprehensive verification practice of the OPCW, they may provide a useful basis for developing common standards, which may in turn help in evaluating the cost-effectiveness of verification methods for the Biological and Toxin Weapons Convention and other components of a WMD control regime

Heavy water physical verification in power plants

International Nuclear Information System (INIS)

Morsy, S.; Schuricht, V.; Beetle, T.; Szabo, E.

1986-01-01

This paper is a report on the Agency experience in verifying heavy water inventories in power plants. The safeguards objectives and goals for such activities are defined in the paper. The heavy water is stratified according to the flow within the power plant, including upgraders. A safeguards scheme based on a combination of records auditing, comparing records and reports, and physical verification has been developed. This scheme has elevated the status of heavy water safeguards to a level comparable to nuclear material safeguards in bulk facilities. It leads to attribute and variable verification of the heavy water inventory in the different system components and in the store. The verification methods include volume and weight determination, sampling and analysis, non-destructive assay (NDA), and criticality check. The analysis of the different measurement methods and their limits of accuracy are discussed in the paper

Design exploration and verification platform, based on high-level modeling and FPGA prototyping, for fast and flexible digital communication in physics experiments

International Nuclear Information System (INIS)

Magazzù, G; Borgese, G; Costantino, N; Fanucci, L; Saponara, S; Incandela, J

2013-01-01

In many research fields as high energy physics (HEP), astrophysics, nuclear medicine or space engineering with harsh operating conditions, the use of fast and flexible digital communication protocols is becoming more and more important. The possibility to have a smart and tested top-down design flow for the design of a new protocol for control/readout of front-end electronics is very useful. To this aim, and to reduce development time, costs and risks, this paper describes an innovative design/verification flow applied as example case study to a new communication protocol called FF-LYNX. After the description of the main FF-LYNX features, the paper presents: the definition of a parametric SystemC-based Integrated Simulation Environment (ISE) for high-level protocol definition and validation; the set up of figure of merits to drive the design space exploration; the use of ISE for early analysis of the achievable performances when adopting the new communication protocol and its interfaces for a new (or upgraded) physics experiment; the design of VHDL IP cores for the TX and RX protocol interfaces; their implementation on a FPGA-based emulator for functional verification and finally the modification of the FPGA-based emulator for testing the ASIC chipset which implements the rad-tolerant protocol interfaces. For every step, significant results will be shown to underline the usefulness of this design and verification approach that can be applied to any new digital protocol development for smart detectors in physics experiments.

Design exploration and verification platform, based on high-level modeling and FPGA prototyping, for fast and flexible digital communication in physics experiments

Science.gov (United States)

Magazzù, G.; Borgese, G.; Costantino, N.; Fanucci, L.; Incandela, J.; Saponara, S.

2013-02-01

In many research fields as high energy physics (HEP), astrophysics, nuclear medicine or space engineering with harsh operating conditions, the use of fast and flexible digital communication protocols is becoming more and more important. The possibility to have a smart and tested top-down design flow for the design of a new protocol for control/readout of front-end electronics is very useful. To this aim, and to reduce development time, costs and risks, this paper describes an innovative design/verification flow applied as example case study to a new communication protocol called FF-LYNX. After the description of the main FF-LYNX features, the paper presents: the definition of a parametric SystemC-based Integrated Simulation Environment (ISE) for high-level protocol definition and validation; the set up of figure of merits to drive the design space exploration; the use of ISE for early analysis of the achievable performances when adopting the new communication protocol and its interfaces for a new (or upgraded) physics experiment; the design of VHDL IP cores for the TX and RX protocol interfaces; their implementation on a FPGA-based emulator for functional verification and finally the modification of the FPGA-based emulator for testing the ASIC chipset which implements the rad-tolerant protocol interfaces. For every step, significant results will be shown to underline the usefulness of this design and verification approach that can be applied to any new digital protocol development for smart detectors in physics experiments.

Formal Verification of Digital Protection Logic and Automatic Testing Software

Energy Technology Data Exchange (ETDEWEB)

Cha, S. D.; Ha, J. S.; Seo, J. S. [KAIST, Daejeon (Korea, Republic of)

2008-06-15

- Technical aspect {center_dot} It is intended that digital I and C software have safety and reliability. Project results help the software to acquire license. Software verification technique, which results in this project, can be to use for digital NPP(Nuclear power plant) in the future. {center_dot} This research introduces many meaningful results of verification on digital protection logic and suggests I and C software testing strategy. These results apply to verify nuclear fusion device, accelerator, nuclear waste management and nuclear medical device that require dependable software and high-reliable controller. Moreover, These can be used for military, medical or aerospace-related software. - Economical and industrial aspect {center_dot} Since safety of digital I and C software is highly import, It is essential for the software to be verified. But verification and licence acquisition related to digital I and C software face high cost. This project gives economic profit to domestic economy by using introduced verification and testing technique instead of foreign technique. {center_dot} The operation rate of NPP will rise, when NPP safety critical software is verified with intellectual V and V tool. It is expected that these software substitute safety-critical software that wholly depend on foreign. Consequently, the result of this project has high commercial value and the recognition of the software development works will be able to be spread to the industrial circles. - Social and cultural aspect People expect that nuclear power generation contributes to relieving environmental problems because that does not emit more harmful air pollution source than other power generations. To give more trust and expectation about nuclear power generation to our society, we should make people to believe that NPP is highly safe system. In that point of view, we can present high-reliable I and C proofed by intellectual V and V technique as evidence

LAG, GAPS AND CONVERGENCES – FIVE CENTURIES OF EUROPEAN ECONOMIC EXPERIENCES

Directory of Open Access Journals (Sweden)

Dr. Bogdan MURGESCU

2010-11-01

Full Text Available This paper entails the experience of different European countries in what concerns economic gaps storage, “economic lag” and “catching-up the lag time”, confronting economic theories regarding economic growth determinants. Taking into consideration the cases of Denmark and Ireland, which have managed, in different historical periods, to surpass the peripheral condition and relative economic under- development, and to be part of the most developed and prosper group countries; the study evaluates the chances of other countries to realize similar progresses.

Multilateral disarmament verification

International Nuclear Information System (INIS)

Persbo, A.

2013-01-01

Non-governmental organisations, such as VERTIC (Verification Research, Training and Information Centre), can play an important role in the promotion of multilateral verification. Parties involved in negotiating nuclear arms accords are for the most part keen that such agreements include suitable and robust provisions for monitoring and verification. Generally progress in multilateral arms control verification is often painstakingly slow, but from time to time 'windows of opportunity' - that is, moments where ideas, technical feasibility and political interests are aligned at both domestic and international levels - may occur and we have to be ready, so the preparatory work is very important. In the context of nuclear disarmament, verification (whether bilateral or multilateral) entails an array of challenges, hurdles and potential pitfalls relating to national security, health, safety and even non-proliferation, so preparatory work is complex and time-greedy. A UK-Norway Initiative was established in order to investigate the role that a non-nuclear-weapon state such as Norway could potentially play in the field of nuclear arms control verification. (A.C.)

North Korea's nuclear weapons program:verification priorities and new challenges.

Energy Technology Data Exchange (ETDEWEB)

Moon, Duk-ho (Korean Consulate General in New York)

2003-12-01

A comprehensive settlement of the North Korean nuclear issue may involve military, economic, political, and diplomatic components, many of which will require verification to ensure reciprocal implementation. This paper sets out potential verification methodologies that might address a wide range of objectives. The inspection requirements set by the International Atomic Energy Agency form the foundation, first as defined at the time of the Agreed Framework in 1994, and now as modified by the events since revelation of the North Korean uranium enrichment program in October 2002. In addition, refreezing the reprocessing facility and 5 MWe reactor, taking possession of possible weapons components and destroying weaponization capabilities add many new verification tasks. The paper also considers several measures for the short-term freezing of the North's nuclear weapon program during the process of negotiations, should that process be protracted. New inspection technologies and monitoring tools are applicable to North Korean facilities and may offer improved approaches over those envisioned just a few years ago. These are noted, and potential bilateral and regional verification regimes are examined.

Examining the examiners: an online eyebrow verification experiment inspired by FISWG

NARCIS (Netherlands)

Zeinstra, Christopher Gerard; Veldhuis, Raymond N.J.; Spreeuwers, Lieuwe Jan

2015-01-01

In forensic face comparison, one of the features taken into account are the eyebrows. In this paper, we investigate human performance on an eyebrow verification task. This task is executed twice by participants: a "best-effort" approach and an approach using features based on forensic knowledge. The

Development of independent MU/treatment time verification algorithm for non-IMRT treatment planning: A clinical experience

Science.gov (United States)

Tatli, Hamza; Yucel, Derya; Yilmaz, Sercan; Fayda, Merdan

2018-02-01

The aim of this study is to develop an algorithm for independent MU/treatment time (TT) verification for non-IMRT treatment plans, as a part of QA program to ensure treatment delivery accuracy. Two radiotherapy delivery units and their treatment planning systems (TPS) were commissioned in Liv Hospital Radiation Medicine Center, Tbilisi, Georgia. Beam data were collected according to vendors' collection guidelines, and AAPM reports recommendations, and processed by Microsoft Excel during in-house algorithm development. The algorithm is designed and optimized for calculating SSD and SAD treatment plans, based on AAPM TG114 dose calculation recommendations, coded and embedded in MS Excel spreadsheet, as a preliminary verification algorithm (VA). Treatment verification plans were created by TPSs based on IAEA TRS 430 recommendations, also calculated by VA, and point measurements were collected by solid water phantom, and compared. Study showed that, in-house VA can be used for non-IMRT plans MU/TT verifications.

Technical safety requirements control level verification

International Nuclear Information System (INIS)

STEWART, J.L.

1999-01-01

A Technical Safety Requirement (TSR) control level verification process was developed for the Tank Waste Remediation System (TWRS) TSRs at the Hanford Site in Richland, WA, at the direction of the US. Department of Energy, Richland Operations Office (RL). The objective of the effort was to develop a process to ensure that the TWRS TSR controls are designated and managed at the appropriate levels as Safety Limits (SLs), Limiting Control Settings (LCSs), Limiting Conditions for Operation (LCOs), Administrative Controls (ACs), or Design Features. The TSR control level verification process was developed and implemented by a team of contractor personnel with the participation of Fluor Daniel Hanford, Inc. (FDH), the Project Hanford Management Contract (PHMC) integrating contractor, and RL representatives. The team was composed of individuals with the following experience base: nuclear safety analysis; licensing; nuclear industry and DOE-complex TSR preparation/review experience; tank farm operations; FDH policy and compliance; and RL-TWRS oversight. Each TSR control level designation was completed utilizing TSR control logic diagrams and TSR criteria checklists based on DOE Orders, Standards, Contractor TSR policy, and other guidance. The control logic diagrams and criteria checklists were reviewed and modified by team members during team meetings. The TSR control level verification process was used to systematically evaluate 12 LCOs, 22 AC programs, and approximately 100 program key elements identified in the TWRS TSR document. The verification of each TSR control required a team consensus. Based on the results of the process, refinements were identified and the TWRS TSRs were modified as appropriate. A final report documenting key assumptions and the control level designation for each TSR control was prepared and is maintained on file for future reference. The results of the process were used as a reference in the RL review of the final TWRS TSRs and control suite. RL

A methodology for the rigorous verification of plasma simulation codes

Science.gov (United States)

Riva, Fabio

2016-10-01

The methodology used to assess the reliability of numerical simulation codes constitutes the Verification and Validation (V&V) procedure. V&V is composed by two separate tasks: the verification, which is a mathematical issue targeted to assess that the physical model is correctly solved, and the validation, which determines the consistency of the code results, and therefore of the physical model, with experimental data. In the present talk we focus our attention on the verification, which in turn is composed by the code verification, targeted to assess that a physical model is correctly implemented in a simulation code, and the solution verification, that quantifies the numerical error affecting a simulation. Bridging the gap between plasma physics and other scientific domains, we introduced for the first time in our domain a rigorous methodology for the code verification, based on the method of manufactured solutions, as well as a solution verification based on the Richardson extrapolation. This methodology was applied to GBS, a three-dimensional fluid code based on a finite difference scheme, used to investigate the plasma turbulence in basic plasma physics experiments and in the tokamak scrape-off layer. Overcoming the difficulty of dealing with a numerical method intrinsically affected by statistical noise, we have now generalized the rigorous verification methodology to simulation codes based on the particle-in-cell algorithm, which are employed to solve Vlasov equation in the investigation of a number of plasma physics phenomena.

Embedded software verification and debugging

CERN Document Server

Winterholer, Markus

2017-01-01

This book provides comprehensive coverage of verification and debugging techniques for embedded software, which is frequently used in safety critical applications (e.g., automotive), where failures are unacceptable. Since the verification of complex systems needs to encompass the verification of both hardware and embedded software modules, this book focuses on verification and debugging approaches for embedded software with hardware dependencies. Coverage includes the entire flow of design, verification and debugging of embedded software and all key approaches to debugging, dynamic, static, and hybrid verification. This book discusses the current, industrial embedded software verification flow, as well as emerging trends with focus on formal and hybrid verification and debugging approaches. Includes in a single source the entire flow of design, verification and debugging of embedded software; Addresses the main techniques that are currently being used in the industry for assuring the quality of embedded softw...

Software verification for nuclear industry

International Nuclear Information System (INIS)

Wilburn, N.P.

1985-08-01

Why verification of software products throughout the software life cycle is necessary is considered. Concepts of verification, software verification planning, and some verification methodologies for products generated throughout the software life cycle are then discussed

Role of experiments in soil-structure interaction methodology verification

International Nuclear Information System (INIS)

Srinivasan, M.G.; Kot, C.A.; Hsieh, B.J.

1986-01-01

Different kinds of experimental data may be useful for partial or full verification of SSI analysis methods. The great bulk of existing data comes from earthquake records and dynamic testing of as-built structures. However, much of this data may not be suitable for the present purpose as the measurement locations were not selected with the verification of SSI analysis in mind and hence are too few in number or inappropriate in character. Data from scale model testing that include the soil in the model - both in-situ and laboratory - are relatively scarce. If the difficulty in satisfying the requirements of similitude laws on the one hand and simulating realistic soil behavior on the other can be resolved, scale model testing may generate very useful data for relatively low cost. The current NRC sponsored programs are expected to generate data very useful for verifying analysis methods for SSI. A systematic effort to inventory, evaluate and classify existing data is first necessary. This effort would probably show that more data is needed for the better understanding of SSI aspects such as spatial variation of ground motion and the related issue of foundation input motion, and soil stiffness. Collection of response data from in-structure and free field (surface and downhole) through instrumentation of selected as-built structures in seismically active regions may be the most efficient way to obtain the needed data. Augmentation of this data from properly designed scale model tests should also be considered

Improved verification methods for safeguards verifications at enrichment plants

International Nuclear Information System (INIS)

Lebrun, A.; Kane, S. C.; Bourva, L.; Poirier, S.; Loghin, N. E.; Langlands, D.

2009-01-01

The International Atomic Energy Agency (IAEA) has initiated a coordinated research and development programme to improve its verification methods and equipment applicable to enrichment plants. The programme entails several individual projects to meet the objectives of the IAEA Safeguards Model Approach for Gas Centrifuge Enrichment Plants updated in 2006. Upgrades of verification methods to confirm the absence of HEU (highly enriched uranium) production have been initiated and, in particular, the Cascade Header Enrichment Monitor (CHEM) has been redesigned to reduce its weight and incorporate an electrically cooled germanium detector. Such detectors are also introduced to improve the attended verification of UF 6 cylinders for the verification of the material balance. Data sharing of authenticated operator weighing systems such as accountancy scales and process load cells is also investigated as a cost efficient and an effective safeguards measure combined with unannounced inspections, surveillance and non-destructive assay (NDA) measurement. (authors)

Improved verification methods for safeguards verifications at enrichment plants

Energy Technology Data Exchange (ETDEWEB)

Lebrun, A.; Kane, S. C.; Bourva, L.; Poirier, S.; Loghin, N. E.; Langlands, D. [Department of Safeguards, International Atomic Energy Agency, Wagramer Strasse 5, A1400 Vienna (Austria)

2009-07-01

The International Atomic Energy Agency (IAEA) has initiated a coordinated research and development programme to improve its verification methods and equipment applicable to enrichment plants. The programme entails several individual projects to meet the objectives of the IAEA Safeguards Model Approach for Gas Centrifuge Enrichment Plants updated in 2006. Upgrades of verification methods to confirm the absence of HEU (highly enriched uranium) production have been initiated and, in particular, the Cascade Header Enrichment Monitor (CHEM) has been redesigned to reduce its weight and incorporate an electrically cooled germanium detector. Such detectors are also introduced to improve the attended verification of UF{sub 6} cylinders for the verification of the material balance. Data sharing of authenticated operator weighing systems such as accountancy scales and process load cells is also investigated as a cost efficient and an effective safeguards measure combined with unannounced inspections, surveillance and non-destructive assay (NDA) measurement. (authors)

Physics Verification Overview

Energy Technology Data Exchange (ETDEWEB)

Doebling, Scott William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-12

The purpose of the verification project is to establish, through rigorous convergence analysis, that each ASC computational physics code correctly implements a set of physics models and algorithms (code verification); Evaluate and analyze the uncertainties of code outputs associated with the choice of temporal and spatial discretization (solution or calculation verification); and Develop and maintain the capability to expand and update these analyses on demand. This presentation describes project milestones.

Experimental Verification of Boyle's Law and the Ideal Gas Law

Science.gov (United States)

Ivanov, Dragia Trifonov

2007-01-01

Two new experiments are offered concerning the experimental verification of Boyle's law and the ideal gas law. To carry out the experiments, glass tubes, water, a syringe and a metal manometer are used. The pressure of the saturated water vapour is taken into consideration. For educational purposes, the experiments are characterized by their…

A Secure Framework for Location Verification in Pervasive Computing

Science.gov (United States)

Liu, Dawei; Lee, Moon-Chuen; Wu, Dan

The way people use computing devices has been changed in some way by the relatively new pervasive computing paradigm. For example, a person can use a mobile device to obtain its location information at anytime and anywhere. There are several security issues concerning whether this information is reliable in a pervasive environment. For example, a malicious user may disable the localization system by broadcasting a forged location, and it may impersonate other users by eavesdropping their locations. In this paper, we address the verification of location information in a secure manner. We first present the design challenges for location verification, and then propose a two-layer framework VerPer for secure location verification in a pervasive computing environment. Real world GPS-based wireless sensor network experiments confirm the effectiveness of the proposed framework.

Verification Survey of Uranium Mine Remediation

International Nuclear Information System (INIS)

Ron, Stager

2009-01-01

The Canadian Nuclear Safety Commission (CNSC) contracted an independent verification of an intensive gamma radiation survey conducted by a mining company to demonstrate that remediation of disturbed areas was complete. This site was the first of the recent mines being decommissioned in Canada and experience gained here may be applied to other mines being decommissioned in the future. The review included examination of the site-specific basis for clean-up criteria and ALARA as required by CNSC guidance. A paper review of the company report was conducted to determine if protocols were followed and that the summarized results could be independently reproduced. An independent verification survey was conducted on parts of the site and comparisons were made between gamma radiation measurements from the verification survey and the original company survey. Some aspects of data collection using rate meters linked to GPS data loggers are discussed as are aspects for data management and analyses methods required for the large amount of data collected during these surveys. Recommendations were made for implementation of future surveys and reporting the data from those surveys in order to ensure that remediation was complete. (authors)

Horn clause verification with convex polyhedral abstraction and tree automata-based refinement

DEFF Research Database (Denmark)

Kafle, Bishoksan; Gallagher, John Patrick

2017-01-01

In this paper we apply tree-automata techniques to refinement of abstract interpretation in Horn clause verification. We go beyond previous work on refining trace abstractions; firstly we handle tree automata rather than string automata and thereby can capture traces in any Horn clause derivations...... underlying the Horn clauses. Experiments using linear constraint problems and the abstract domain of convex polyhedra show that the refinement technique is practical and that iteration of abstract interpretation with tree automata-based refinement solves many challenging Horn clause verification problems. We...... compare the results with other state-of-the-art Horn clause verification tools....

FMCT verification: Case studies

International Nuclear Information System (INIS)

Hui Zhang

2001-01-01

Full text: How to manage the trade-off between the need for transparency and the concern about the disclosure of sensitive information would be a key issue during the negotiations of FMCT verification provision. This paper will explore the general concerns on FMCT verification; and demonstrate what verification measures might be applied to those reprocessing and enrichment plants. A primary goal of an FMCT will be to have the five declared nuclear weapon states and the three that operate unsafeguarded nuclear facilities become parties. One focus in negotiating the FMCT will be verification. Appropriate verification measures should be applied in each case. Most importantly, FMCT verification would focus, in the first instance, on these states' fissile material production facilities. After the FMCT enters into force, all these facilities should be declared. Some would continue operating to produce civil nuclear power or to produce fissile material for non- explosive military uses. The verification measures necessary for these operating facilities would be essentially IAEA safeguards, as currently being applied to non-nuclear weapon states under the NPT. However, some production facilities would be declared and shut down. Thus, one important task of the FMCT verifications will be to confirm the status of these closed facilities. As case studies, this paper will focus on the verification of those shutdown facilities. The FMCT verification system for former military facilities would have to differ in some ways from traditional IAEA safeguards. For example, there could be concerns about the potential loss of sensitive information at these facilities or at collocated facilities. Eventually, some safeguards measures such as environmental sampling might be seen as too intrusive. Thus, effective but less intrusive verification measures may be needed. Some sensitive nuclear facilities would be subject for the first time to international inspections, which could raise concerns

Research on key technology of the verification system of steel rule based on vision measurement

Science.gov (United States)

Jia, Siyuan; Wang, Zhong; Liu, Changjie; Fu, Luhua; Li, Yiming; Lu, Ruijun

2018-01-01

The steel rule plays an important role in quantity transmission. However, the traditional verification method of steel rule based on manual operation and reading brings about low precision and low efficiency. A machine vison based verification system of steel rule is designed referring to JJG1-1999-Verificaiton Regulation of Steel Rule [1]. What differentiates this system is that it uses a new calibration method of pixel equivalent and decontaminates the surface of steel rule. Experiments show that these two methods fully meet the requirements of the verification system. Measuring results strongly prove that these methods not only meet the precision of verification regulation, but also improve the reliability and efficiency of the verification system.

Inspector measurement verification activities

International Nuclear Information System (INIS)

George, R.S.; Crouch, R.

e most difficult and complex activity facing a safeguards inspector involves the verification of measurements and the performance of the measurement system. Remeasurement is the key to measurement verification activities. Remeasurerements using the facility's measurement system provide the bulk of the data needed for determining the performance of the measurement system. Remeasurements by reference laboratories are also important for evaluation of the measurement system and determination of systematic errors. The use of these measurement verification activities in conjunction with accepted inventory verification practices provides a better basis for accepting or rejecting an inventory. (U.S.)

Verification and disarmament

Energy Technology Data Exchange (ETDEWEB)

Blix, H. [IAEA, Vienna (Austria)

1998-07-01

The main features are described of the IAEA safeguards verification system that non-nuclear weapon states parties of the NPT are obliged to accept. Verification activities/problems in Iraq and North Korea are discussed.

Verification and disarmament

International Nuclear Information System (INIS)

Blix, H.

1998-01-01

The main features are described of the IAEA safeguards verification system that non-nuclear weapon states parties of the NPT are obliged to accept. Verification activities/problems in Iraq and North Korea are discussed

How to Find a Bug in Ten Thousand Lines Transport Solver? Outline of Experiences from AN Advection-Diffusion Code Verification

Science.gov (United States)

Zamani, K.; Bombardelli, F.

2011-12-01

Almost all natural phenomena on Earth are highly nonlinear. Even simplifications to the equations describing nature usually end up being nonlinear partial differential equations. Transport (ADR) equation is a pivotal equation in atmospheric sciences and water quality. This nonlinear equation needs to be solved numerically for practical purposes so academicians and engineers thoroughly rely on the assistance of numerical codes. Thus, numerical codes require verification before they are utilized for multiple applications in science and engineering. Model verification is a mathematical procedure whereby a numerical code is checked to assure the governing equation is properly solved as it is described in the design document. CFD verification is not a straightforward and well-defined course. Only a complete test suite can uncover all the limitations and bugs. Results are needed to be assessed to make a distinction between bug-induced-defect and innate limitation of a numerical scheme. As Roache (2009) said, numerical verification is a state-of-the-art procedure. Sometimes novel tricks work out. This study conveys the synopsis of the experiences we gained during a comprehensive verification process which was done for a transport solver. A test suite was designed including unit tests and algorithmic tests. Tests were layered in complexity in several dimensions from simple to complex. Acceptance criteria defined for the desirable capabilities of the transport code such as order of accuracy, mass conservation, handling stiff source term, spurious oscillation, and initial shape preservation. At the begining, mesh convergence study which is the main craft of the verification is performed. To that end, analytical solution of ADR equation gathered. Also a new solution was derived. In the more general cases, lack of analytical solution could be overcome through Richardson Extrapolation and Manufactured Solution. Then, two bugs which were concealed during the mesh convergence

Technical safety requirements control level verification; TOPICAL

International Nuclear Information System (INIS)

STEWART, J.L.

1999-01-01

A Technical Safety Requirement (TSR) control level verification process was developed for the Tank Waste Remediation System (TWRS) TSRs at the Hanford Site in Richland, WA, at the direction of the US. Department of Energy, Richland Operations Office (RL). The objective of the effort was to develop a process to ensure that the TWRS TSR controls are designated and managed at the appropriate levels as Safety Limits (SLs), Limiting Control Settings (LCSs), Limiting Conditions for Operation (LCOs), Administrative Controls (ACs), or Design Features. The TSR control level verification process was developed and implemented by a team of contractor personnel with the participation of Fluor Daniel Hanford, Inc. (FDH), the Project Hanford Management Contract (PHMC) integrating contractor, and RL representatives. The team was composed of individuals with the following experience base: nuclear safety analysis; licensing; nuclear industry and DOE-complex TSR preparation/review experience; tank farm operations; FDH policy and compliance; and RL-TWRS oversight. Each TSR control level designation was completed utilizing TSR control logic diagrams and TSR criteria checklists based on DOE Orders, Standards, Contractor TSR policy, and other guidance. The control logic diagrams and criteria checklists were reviewed and modified by team members during team meetings. The TSR control level verification process was used to systematically evaluate 12 LCOs, 22 AC programs, and approximately 100 program key elements identified in the TWRS TSR document. The verification of each TSR control required a team consensus. Based on the results of the process, refinements were identified and the TWRS TSRs were modified as appropriate. A final report documenting key assumptions and the control level designation for each TSR control was prepared and is maintained on file for future reference. The results of the process were used as a reference in the RL review of the final TWRS TSRs and control suite. RL

Design of verification platform for wireless vision sensor networks

Science.gov (United States)

Ye, Juanjuan; Shang, Fei; Yu, Chuang

2017-08-01

At present, the majority of research for wireless vision sensor networks (WVSNs) still remains in the software simulation stage, and the verification platforms of WVSNs that available for use are very few. This situation seriously restricts the transformation from theory research of WVSNs to practical application. Therefore, it is necessary to study the construction of verification platform of WVSNs. This paper combines wireless transceiver module, visual information acquisition module and power acquisition module, designs a high-performance wireless vision sensor node whose core is ARM11 microprocessor and selects AODV as the routing protocol to set up a verification platform called AdvanWorks for WVSNs. Experiments show that the AdvanWorks can successfully achieve functions of image acquisition, coding, wireless transmission, and obtain the effective distance parameters between nodes, which lays a good foundation for the follow-up application of WVSNs.

Verification and Diagnostics Framework in ATLAS Trigger/DAQ

CERN Document Server

Barczyk, M.; Caprini, M.; Da Silva Conceicao, J.; Dobson, M.; Flammer, J.; Jones, R.; Kazarov, A.; Kolos, S.; Liko, D.; Lucio, L.; Mapelli, L.; Soloviev, I.; Hart, R.; Amorim, A.; Klose, D.; Lima, J.; Pedro, J.; Wolters, H.; Badescu, E.; Alexandrov, I.; Kotov, V.; Mineev, M.; Ryabov, Yu.; Ryabov, Yu.

2003-01-01

Trigger and data acquisition (TDAQ) systems for modern HEP experiments are composed of thousands of hardware and software components depending on each other in a very complex manner. Typically, such systems are operated by non-expert shift operators, which are not aware of system functionality details. It is therefore necessary to help the operator to control the system and to minimize system down-time by providing knowledge-based facilities for automatic testing and verification of system components and also for error diagnostics and recovery. For this purpose, a verification and diagnostic framework was developed in the scope of ATLAS TDAQ. The verification functionality of the framework allows developers to configure simple low-level tests for any component in a TDAQ configuration. The test can be configured as one or more processes running on different hosts. The framework organizes tests in sequences, using knowledge about components hierarchy and dependencies, and allowing the operator to verify the fun...

HDL to verification logic translator

Science.gov (United States)

Gambles, J. W.; Windley, P. J.

1992-01-01

The increasingly higher number of transistors possible in VLSI circuits compounds the difficulty in insuring correct designs. As the number of possible test cases required to exhaustively simulate a circuit design explodes, a better method is required to confirm the absence of design faults. Formal verification methods provide a way to prove, using logic, that a circuit structure correctly implements its specification. Before verification is accepted by VLSI design engineers, the stand alone verification tools that are in use in the research community must be integrated with the CAD tools used by the designers. One problem facing the acceptance of formal verification into circuit design methodology is that the structural circuit descriptions used by the designers are not appropriate for verification work and those required for verification lack some of the features needed for design. We offer a solution to this dilemma: an automatic translation from the designers' HDL models into definitions for the higher-ordered logic (HOL) verification system. The translated definitions become the low level basis of circuit verification which in turn increases the designer's confidence in the correctness of higher level behavioral models.

Formal verification of reactor process control software using assertion checking environment

International Nuclear Information System (INIS)

Sharma, Babita; Balaji, Sowmya; John, Ajith K.; Bhattacharjee, A.K.; Dhodapkar, S.D.

2005-01-01

Assertion Checking Environment (ACE) was developed in-house for carrying out formal (rigorous/ mathematical) functional verification of embedded software written in MISRA C. MISRA C is an industrially sponsored safe sub-set of C programming language and is well accepted in the automotive and aerospace industries. ACE uses static assertion checking technique for verification of MISRA C programs. First the functional specifications of the program are derived from the specifications in the form of pre- and post-conditions for each C function. These pre- and post-conditions are then introduced as assertions (formal comments) in the program code. The annotated C code is then formally verified using ACE. In this paper we present our experience of using ACE for the formal verification of process control software of a nuclear reactor. The Software Requirements Document (SRD) contained textual specifications of the process control software. The SRD was used by the designers to draw logic diagrams which were given as input to a code generator. The verification of the generated C code was done at 2 levels viz. (i) verification against specifications derived from logic diagrams, and (ii) verification against specifications derived from SRD. In this work we checked approximately 600 functional specifications of the software having roughly 15000 lines of code. (author)

Verification of kinetic parameters of coupled fast-thermal core HERBE

International Nuclear Information System (INIS)

Pesic, M.; Marinkovic, P.; Milosevic, M.; Nikolic, D.; Zavaljevski, N.; Milovanovic, S.; Ljubenov, V.

1997-03-01

The HERBE system is a new coupled fast-thermal core constructed in 1989 at the RB critical heavy water assembly at the VINCA Institute. It was designed with the aim to improve experimental possibilities in fast neutron fields and for experimental verification of reactor design-oriented methods. This paper overviews experiments for kinetic parameters verification carried out at HERBE system. Their short description and comparison of experimental and calculation results are included. A brief introduction to the computer codes used in the calculations is presented too. (author)

[Demographic influence on economic stability: the United States experience].

Science.gov (United States)

Easterlin, R A; Wachter, M; Wachter, S M

1978-01-01

Up to the 1930s the international migration rate into the U.S. was very high, while birth and mortality rates had little variation; migration was, therefore, the principal responsible for population growth rate. Migration cycles were induced by economic conditions, and had, in their turn, important effects on economic feedback. The growing of urban areas, i.e., accelerated demand for new homes and urban services in general, prolonged the economic expansion. After World War 2 a new period opened in the relation between demographic and economic cycles. At the end of the 1950s the U.S. experienced a considerable growth in the number of people between 15-29, due to corresponding birth rate increase, which initiated around 1940. This marked difference in the relative number of young adults, or manpower, resulted in an economic situation relatively unfavorable. For the future a decrease in the relative number of young adults is expected, reflecting the decrease in birth rate experienced around 1960. If the U.S. should experience a new "baby boom" in the next few decades, radical changes in the demographic composition of manpower will have to be expected.

A study of compositional verification based IMA integration method

Science.gov (United States)

Huang, Hui; Zhang, Guoquan; Xu, Wanmeng

2018-03-01

The rapid development of avionics systems is driving the application of integrated modular avionics (IMA) systems. But meanwhile it is improving avionics system integration, complexity of system test. Then we need simplify the method of IMA system test. The IMA system supports a module platform that runs multiple applications, and shares processing resources. Compared with federated avionics system, IMA system is difficult to isolate failure. Therefore, IMA system verification will face the critical problem is how to test shared resources of multiple application. For a simple avionics system, traditional test methods are easily realizing to test a whole system. But for a complex system, it is hard completed to totally test a huge and integrated avionics system. Then this paper provides using compositional-verification theory in IMA system test, so that reducing processes of test and improving efficiency, consequently economizing costs of IMA system integration.

X447 EBR-II Experiment Benchmark for Verification of Audit Code of SFR Metal Fuel

Energy Technology Data Exchange (ETDEWEB)

Choi, Yong Won; Bae, Moo-Hoon; Shin, Andong; Suh, Namduk [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2016-10-15

In KINS (Korea Institute of Nuclear Safety), to prepare audit calculation of PGSFR licensing review, the project has been started to develop the regulatory technology for SFR system including a fuel area. To evaluate the fuel integrity and safety during an irradiation, the fuel performance code must be used for audit calculation. In this study, to verify the new code system, the benchmark analysis is performed. In the benchmark, X447 EBR-II experiment data are used. Additionally, the sensitivity analysis according to mass flux change of coolant is performed. In case of LWR fuel performance modeling, various and advanced models have been proposed and validated based on sufficient in-reactor test results. However, due to the lack of experience of SFR operation, the current understanding of SFR fuel behavior is limited. In this study, X447 EBR-II Experiment data are used for benchmark. The fuel composition of X447 assembly is U-10Zr and PGSFR also uses this composition in initial phase. So we select X447 EBR-II experiment for benchmark analysis. Due to the lack of experience of SFR operation and data, the current understanding of SFR fuel behavior is limited. However, in order to prepare the licensing of PGSFR, regulatory audit technologies of SFR must be secured. So, in this study, to verify the new audit fuel performance analysis code, the benchmark analysis is performed using X447 EBR-II experiment data. Also, the sensitivity analysis with mass flux change of coolant is performed. In terms of verification, it is considered that the results of benchmark and sensitivity analysis are reasonable.

X447 EBR-II Experiment Benchmark for Verification of Audit Code of SFR Metal Fuel

International Nuclear Information System (INIS)

Choi, Yong Won; Bae, Moo-Hoon; Shin, Andong; Suh, Namduk

2016-01-01

In KINS (Korea Institute of Nuclear Safety), to prepare audit calculation of PGSFR licensing review, the project has been started to develop the regulatory technology for SFR system including a fuel area. To evaluate the fuel integrity and safety during an irradiation, the fuel performance code must be used for audit calculation. In this study, to verify the new code system, the benchmark analysis is performed. In the benchmark, X447 EBR-II experiment data are used. Additionally, the sensitivity analysis according to mass flux change of coolant is performed. In case of LWR fuel performance modeling, various and advanced models have been proposed and validated based on sufficient in-reactor test results. However, due to the lack of experience of SFR operation, the current understanding of SFR fuel behavior is limited. In this study, X447 EBR-II Experiment data are used for benchmark. The fuel composition of X447 assembly is U-10Zr and PGSFR also uses this composition in initial phase. So we select X447 EBR-II experiment for benchmark analysis. Due to the lack of experience of SFR operation and data, the current understanding of SFR fuel behavior is limited. However, in order to prepare the licensing of PGSFR, regulatory audit technologies of SFR must be secured. So, in this study, to verify the new audit fuel performance analysis code, the benchmark analysis is performed using X447 EBR-II experiment data. Also, the sensitivity analysis with mass flux change of coolant is performed. In terms of verification, it is considered that the results of benchmark and sensitivity analysis are reasonable

Sustaining a verification regime in a nuclear weapon-free world. VERTIC research report no. 4

International Nuclear Information System (INIS)

Moyland, S. van

1999-01-01

Sustaining high levels of commitment to and enthusiasm for the verification regime in a nuclear weapon-free world (NWFW) would be a considerable challenge, but the price of failure would be high. No verification system for a complete ban on a whole of weapon of mass destruction (WMD) has been in existence long enough to provide a precedent or the requisite experience. Nevertheless, lessons from the International Atomic Energy Agency's (IAEA) nuclear safeguards system are instructive. A potential problem over the long haul is the gradual erosion of the deterrent effect of verification that may result from the continual overlooking of minor instances of non-compliance. Flaws in the verification system must be identified and dealt with early lest they also corrode the system. To achieve this the verification organisation's inspectors and analytical staff will need sustained support, encouragement, resources and training. In drawing attention to weaknesses, they must be supported by management and at the political level. The leaking of sensitive information, either industrial or military, by staff of the verification regime is a potential problem. 'Managed access' techniques should be constantly examined and improved. The verification organisation and states parties will need to sustain close co-operation with the nuclear and related industries. Frequent review mechanisms must be established. States must invest time and effort to make them effective. Another potential problem is the withering of resources for sustained verification. Verification organisations tend to be pressured by states to cut or last least cap costs, even if the verification workload increases. The verification system must be effective as knowledge and experience allows. The organisation will need continuously to update its scientific methods and technology. This requires in-house resources plus external research and development (R and D). Universities, laboratories and industry need incentives to

Competition in electricity spot markets. Economic theory and international experience

Energy Technology Data Exchange (ETDEWEB)

Fehr, Nils-Henrik von der; Harbord, David

1998-09-01

This publication gives a survey of economic theory and international experience connected to electricity spot markets. The main purpose is to consider the attempts that have been made to apply economic theory and empirical methods to the analysis of electricity markets, and to evaluate them in light of theoretical considerations and empirical evidence. The publication describes in simple terms the basic pool pricing mechanism, and experience with pools in a number of countries. It is worth emphasizing that it is not the purpose to treat in extensive detail the structure of electricity pools around the world. Key factors of the markets in England and Wales, Norway and Australia are described in order to allow for a comparison of design issues and evaluation of competitive performance. 80 refs., 14 figs., 15 tabs.

Made in Denmark 2014 - Evaluation of Spectator Experience and Tourism Economic Impacts

DEFF Research Database (Denmark)

Toft, Henrik; Zahle Østergaard, Mads

2015-01-01

This report is a translation of the impact analysis of the golf tournament, Made in Denmark, which was held in August 2014. The content of the report is divided into two sub-parts. The first part is an analysis of the spectator experience and how well the experience of being at this event was ass...... was asssessed by the spectators. The second part is a tourism economic impact analysis which purpose is to analyse, evaluate and assess the economic impact this event had on the local area where it was held....

Verification of Liveness Properties on Closed Timed-Arc Petri Nets

DEFF Research Database (Denmark)

Andersen, Mathias; Larsen, Heine G.; Srba, Jiri

2012-01-01

Verification of closed timed models by explicit state-space exploration methods is an alternative to the wide-spread symbolic techniques based on difference bound matrices (DBMs). A few experiments found in the literature confirm that for the reachability analysis of timed automata explicit...... techniques can compete with DBM-based algorithms, at least for situations where the constants used in the models are relatively small. To the best of our knowledge, the explicit methods have not yet been employed in the verification of liveness properties in Petri net models extended with time. We present...

Verification of RRC Ki code package for neutronic calculations of WWER core with GD

International Nuclear Information System (INIS)

Aleshin, S.S.; Bolshagin, S.N.; Lazarenko, A.P.; Markov, A.V.; Pavlov, V.I.; Pavlovitchev, A.M.; Sidorenko, V.D.; Tsvetkov, V.M.

2001-01-01

The report presented is concerned with verification results of TVS-M/PERMAK-A/BIPR-7A code package for WWERs neutronic calculation as applied to calculation of systems containing U-GD pins. The verification is based on corresponded benchmark calculations, data critical experiments and on operation data obtained WWER units with Gd. The comparison results are discussed (Authors)

A Systematic Method for Verification and Validation of Gyrokinetic Microstability Codes

Energy Technology Data Exchange (ETDEWEB)

Bravenec, Ronald [Fourth State Research, Austin, TX (United States)

2017-11-14

My original proposal for the period Feb. 15, 2014 through Feb. 14, 2017 called for an integrated validation and verification effort carried out by myself with collaborators. The validation component would require experimental profile and power-balance analysis. In addition, it would require running the gyrokinetic codes varying the input profiles within experimental uncertainties to seek agreement with experiment before discounting a code as invalidated. Therefore, validation would require a major increase of effort over my previous grant periods which covered only code verification (code benchmarking). Consequently, I had requested full-time funding. Instead, I am being funded at somewhat less than half time (5 calendar months per year). As a consequence, I decided to forego the validation component and to only continue the verification efforts.

Economic conversion: The US experience

International Nuclear Information System (INIS)

Williams, R.C.

1994-01-01

At the end of the Second World War, our country experienced what economists have called open-quotes The Great Conversionclose quotes or open-quotes The Great Disarmament.close quotes Following that period and until the beginning of the Viet-Nam War was a time marked by economic expansion and boom. Since those years, there have been several periods during which bases were closed and defense spending was slowed. For the communities going through these transitions, again there was economic expansion. A recent survey reports that, within the last 25 years, over 100 communities redeveloped their economic base and experienced, not catastrophy as they expected, but a period of economic growth. Jobs were not lost but nearly doubled. Small businesses and educational institutions multiplied. Building starts accelerated. The survey attributed this economic growth to proper planning, increased awareness of the need for job training and education, diversification of economic activity, and an ownership on the part of the citizens in their collective economic future. The lesson for us should be that realigning our community economic priorities away from such a strong emphasis on military spending and toward a diverse and productive civilian economy brings economic health. We are relearning this lesson in the redevelopment of Lowry Air Force Base and the transition of Rocky Flats Nuclear Plant from a weapons manufacturing mission to one of cleanup

Likelihood-ratio-based biometric verification

NARCIS (Netherlands)

Bazen, A.M.; Veldhuis, Raymond N.J.

2002-01-01

This paper presents results on optimal similarity measures for biometric verification based on fixed-length feature vectors. First, we show that the verification of a single user is equivalent to the detection problem, which implies that for single-user verification the likelihood ratio is optimal.

Likelihood Ratio-Based Biometric Verification

NARCIS (Netherlands)

Bazen, A.M.; Veldhuis, Raymond N.J.

The paper presents results on optimal similarity measures for biometric verification based on fixed-length feature vectors. First, we show that the verification of a single user is equivalent to the detection problem, which implies that, for single-user verification, the likelihood ratio is optimal.

A bimodal verification cryptosystem as a framework against spoofing attacks

OpenAIRE

Toli, Christina-Angeliki; Preneel, Bart

2015-01-01

The exponential growth of immigration crisis and the recent terrorism cases revealed the increase of fraud occurrences, cloning and identity theft with numerous social, economic and political consequences. The trustworthiness of biometrics during verification processes has been compromised by spoofing attackers sprang up to exploit the security gaps. Additionally, the cryptography’s role in the area is highly important as it may promote fair assessment procedures and foster public trust by se...

Is identity per se irrelevant? A contrarian view of self-verification effects.

Science.gov (United States)

Gregg, Aiden P

2009-01-01

Self-verification theory (SVT) posits that people who hold negative self-views, such as depressive patients, ironically strive to verify that these self-views are correct, by actively seeking out critical feedback or interaction partners who evaluate them unfavorably. Such verification strivings are allegedly directed towards maximizing subjective perceptions of prediction and control. Nonetheless, verification strivings are also alleged to stabilize maladaptive self-perceptions, and thereby hindering therapeutic recovery. Despite the widespread acceptance of SVT, I contend that the evidence for it is weak and circumstantial. In particular, I contend that that most or all major findings cited in support of SVT can be more economically explained in terms of raison oblige theory (ROT). ROT posits that people with negative self-views solicit critical feedback, not because they want it, but because they their self-view inclines them regard it as probative, a necessary condition for considering it worth obtaining. Relevant findings are reviewed and reinterpreted with an emphasis on depression, and some new empirical data reported. (c) 2008 Wiley-Liss, Inc.

When is Economic Growth Pro-Poor? Experiences in Malaysia and Pakistan

OpenAIRE

Mahmood Hasan Khan

2002-01-01

This paper focuses on two central issues related to the contrasting experiences of Malaysia and Pakistan regarding poverty reduction. First, it examines the structure of economic growth and its proximate determinants in the two countries, including the initial conditions, institutional changes, and macroeconomic policies. Second, it analyzes the links between economic growth and poverty reduction, particularly focusing on public policy mechanisms to reduce poverty and inequality. Malaysia, un...

Scalable Techniques for Formal Verification

CERN Document Server

Ray, Sandip

2010-01-01

This book presents state-of-the-art approaches to formal verification techniques to seamlessly integrate different formal verification methods within a single logical foundation. It should benefit researchers and practitioners looking to get a broad overview of the spectrum of formal verification techniques, as well as approaches to combining such techniques within a single framework. Coverage includes a range of case studies showing how such combination is fruitful in developing a scalable verification methodology for industrial designs. This book outlines both theoretical and practical issue

Verification of road databases using multiple road models

Science.gov (United States)

Ziems, Marcel; Rottensteiner, Franz; Heipke, Christian

2017-08-01

In this paper a new approach for automatic road database verification based on remote sensing images is presented. In contrast to existing methods, the applicability of the new approach is not restricted to specific road types, context areas or geographic regions. This is achieved by combining several state-of-the-art road detection and road verification approaches that work well under different circumstances. Each one serves as an independent module representing a unique road model and a specific processing strategy. All modules provide independent solutions for the verification problem of each road object stored in the database in form of two probability distributions, the first one for the state of a database object (correct or incorrect), and a second one for the state of the underlying road model (applicable or not applicable). In accordance with the Dempster-Shafer Theory, both distributions are mapped to a new state space comprising the classes correct, incorrect and unknown. Statistical reasoning is applied to obtain the optimal state of a road object. A comparison with state-of-the-art road detection approaches using benchmark datasets shows that in general the proposed approach provides results with larger completeness. Additional experiments reveal that based on the proposed method a highly reliable semi-automatic approach for road data base verification can be designed.

Clinical Skills Verification, Formative Feedback, and Psychiatry Residency Trainees

Science.gov (United States)

Dalack, Gregory W.; Jibson, Michael D.

2012-01-01

Objective: The authors describe the implementation of Clinical Skills Verification (CSV) in their program as an in-training assessment intended primarily to provide formative feedback to trainees, strengthen the supervisory experience, identify the need for remediation of interviewing skills, and secondarily to demonstrating resident competence…

Entanglement verification and its applications in quantum communication

International Nuclear Information System (INIS)

Haeseler, Hauke

2010-01-01

coherent storage of light, we focus on the storage of squeezed light. This situation requires an extension of our verification procedure to sources of mixed input states. We propose such an extension, and give a detailed analysis of its application to squeezed thermal states, displaced thermal states and mixed qubit states. This is supplemented by finding the optimal entanglement-breaking channels for each of these situations, which provides us with an indication of the strength of the extension to our entanglement criterion. The subject of Chapter 6 is also the benchmarking of quantum memory or teleportation experiments. Considering a number of recently published benchmark criteria, we investigate the question which one is most useful to actual experiments. We first compare the different criteria for typical settings and sort them according to their resilience to excess noise. Then, we introduce a further improvement to the Expectation Value Matrix method, which results in the desired optimal benchmark criterion. Finally, we investigate naturally occurring phase fluctuations and find them to further simplify the implementation of our criterion. Thus, we formulate the first truly useful way of validating experiments for the quantum storage or transmission of light. (orig.)

Economic Polarization Across European Union Regions in the years 2007–2012 at NUTS 2 Level

Directory of Open Access Journals (Sweden)

Piętak Łukasz

2016-12-01

Full Text Available The aim of this paper is to study the economic polarization in countries of the EU at NUTS 2 level in the years 2007–2012. The studies have to decide on positive or negative verification of the hypothesis, which states that the economic crisis of 2008–2013 had an influence on rising economic polarization in EU countries. The method used in this article is an application of some measures of economic polarization and inequality of income distribution. The carried out research did not allow for the positive verification of the hypothesis. Only in a few countries did the economic crisis have an influence on a reduction of the middle class. In most cases the economic collapse did not play any role in the raising of the economic polarization index. The statistical data used in this paper was taken from the following databases: Statistical Yearbook of the Regions – Poland from 2009 to 2013 and Eurostat – Regional statistics by NUTS classification*.

Algebraic Verification Method for SEREs Properties via Groebner Bases Approaches

Directory of Open Access Journals (Sweden)

Ning Zhou

2013-01-01

Full Text Available This work presents an efficient solution using computer algebra system to perform linear temporal properties verification for synchronous digital systems. The method is essentially based on both Groebner bases approaches and symbolic simulation. A mechanism for constructing canonical polynomial set based symbolic representations for both circuit descriptions and assertions is studied. We then present a complete checking algorithm framework based on these algebraic representations by using Groebner bases. The computational experience result in this work shows that the algebraic approach is a quite competitive checking method and will be a useful supplement to the existent verification methods based on simulation.

Property-based Code Slicing for Efficient Verification of OSEK/VDX Operating Systems

Directory of Open Access Journals (Sweden)

Mingyu Park

2012-12-01

Full Text Available Testing is a de-facto verification technique in industry, but insufficient for identifying subtle issues due to its optimistic incompleteness. On the other hand, model checking is a powerful technique that supports comprehensiveness, and is thus suitable for the verification of safety-critical systems. However, it generally requires more knowledge and cost more than testing. This work attempts to take advantage of both techniques to achieve integrated and efficient verification of OSEK/VDX-based automotive operating systems. We propose property-based environment generation and model extraction techniques using static code analysis, which can be applied to both model checking and testing. The technique is automated and applied to an OSEK/VDX-based automotive operating system, Trampoline. Comparative experiments using random testing and model checking for the verification of assertions in the Trampoline kernel code show how our environment generation and abstraction approach can be utilized for efficient fault-detection.

Verification of Space Weather Forecasts using Terrestrial Weather Approaches

Science.gov (United States)

Henley, E.; Murray, S.; Pope, E.; Stephenson, D.; Sharpe, M.; Bingham, S.; Jackson, D.

2015-12-01

The Met Office Space Weather Operations Centre (MOSWOC) provides a range of 24/7 operational space weather forecasts, alerts, and warnings, which provide valuable information on space weather that can degrade electricity grids, radio communications, and satellite electronics. Forecasts issued include arrival times of coronal mass ejections (CMEs), and probabilistic forecasts for flares, geomagnetic storm indices, and energetic particle fluxes and fluences. These forecasts are produced twice daily using a combination of output from models such as Enlil, near-real-time observations, and forecaster experience. Verification of forecasts is crucial for users, researchers, and forecasters to understand the strengths and limitations of forecasters, and to assess forecaster added value. To this end, the Met Office (in collaboration with Exeter University) has been adapting verification techniques from terrestrial weather, and has been working closely with the International Space Environment Service (ISES) to standardise verification procedures. We will present the results of part of this work, analysing forecast and observed CME arrival times, assessing skill using 2x2 contingency tables. These MOSWOC forecasts can be objectively compared to those produced by the NASA Community Coordinated Modelling Center - a useful benchmark. This approach cannot be taken for the other forecasts, as they are probabilistic and categorical (e.g., geomagnetic storm forecasts give probabilities of exceeding levels from minor to extreme). We will present appropriate verification techniques being developed to address these forecasts, such as rank probability skill score, and comparing forecasts against climatology and persistence benchmarks. As part of this, we will outline the use of discrete time Markov chains to assess and improve the performance of our geomagnetic storm forecasts. We will also discuss work to adapt a terrestrial verification visualisation system to space weather, to help

Verification of Thermal Models of Internally Cooled Gas Turbine Blades

Directory of Open Access Journals (Sweden)

Igor Shevchenko

2018-01-01

Full Text Available Numerical simulation of temperature field of cooled turbine blades is a required element of gas turbine engine design process. The verification is usually performed on the basis of results of test of full-size blade prototype on a gas-dynamic test bench. A method of calorimetric measurement in a molten metal thermostat for verification of a thermal model of cooled blade is proposed in this paper. The method allows obtaining local values of heat flux in each point of blade surface within a single experiment. The error of determination of local heat transfer coefficients using this method does not exceed 8% for blades with radial channels. An important feature of the method is that the heat load remains unchanged during the experiment and the blade outer surface temperature equals zinc melting point. The verification of thermal-hydraulic model of high-pressure turbine blade with cooling allowing asymmetrical heat removal from pressure and suction sides was carried out using the developed method. An analysis of heat transfer coefficients confirmed the high level of heat transfer in the leading edge, whose value is comparable with jet impingement heat transfer. The maximum of the heat transfer coefficients is shifted from the critical point of the leading edge to the pressure side.

Systems Approach to Arms Control Verification

Energy Technology Data Exchange (ETDEWEB)

Allen, K; Neimeyer, I; Listner, C; Stein, G; Chen, C; Dreicer, M

2015-05-15

Using the decades of experience of developing concepts and technologies for verifying bilateral and multilateral arms control agreements, a broad conceptual systems approach is being developed that takes into account varying levels of information and risk. The IAEA has already demonstrated the applicability of a systems approach by implementing safeguards at the State level, with acquisition path analysis as the key element. In order to test whether such an approach could also be implemented for arms control verification, an exercise was conducted in November 2014 at the JRC ITU Ispra. Based on the scenario of a hypothetical treaty between two model nuclear weapons states aimed at capping their nuclear arsenals at existing levels, the goal of this exercise was to explore how to use acquisition path analysis in an arms control context. Our contribution will present the scenario, objectives and results of this exercise, and attempt to define future workshops aimed at further developing verification measures that will deter or detect treaty violations.

Political instability and economic growth: an empirical evidence from the Baltic states

OpenAIRE

Ladislava Grochová; Luděk Kouba

2011-01-01

For more than last 20 decades, new political economics has been dealing with theories of economic growth (for example influential contributions by Mancur Olson, Dani Rodrik). However, less attention has been paid to their empirical verification. The new political economics growth theory defines some factors that are necessary for economic growth among which political stability. Our aim is to test the theory focused on political stability empirically in order to enrich the studies with recent ...

Utterance Verification for Text-Dependent Speaker Recognition

DEFF Research Database (Denmark)

Kinnunen, Tomi; Sahidullah, Md; Kukanov, Ivan

2016-01-01

Text-dependent automatic speaker verification naturally calls for the simultaneous verification of speaker identity and spoken content. These two tasks can be achieved with automatic speaker verification (ASV) and utterance verification (UV) technologies. While both have been addressed previously...

Patient-specific IMRT verification using independent fluence-based dose calculation software: experimental benchmarking and initial clinical experience

International Nuclear Information System (INIS)

Georg, Dietmar; Stock, Markus; Kroupa, Bernhard; Olofsson, Joergen; Nyholm, Tufve; Ahnesjoe, Anders; Karlsson, Mikael

2007-01-01

Experimental methods are commonly used for patient-specific intensity-modulated radiotherapy (IMRT) verification. The purpose of this study was to investigate the accuracy and performance of independent dose calculation software (denoted as 'MUV' (monitor unit verification)) for patient-specific quality assurance (QA). 52 patients receiving step-and-shoot IMRT were considered. IMRT plans were recalculated by the treatment planning systems (TPS) in a dedicated QA phantom, in which an experimental 1D and 2D verification (0.3 cm 3 ionization chamber; films) was performed. Additionally, an independent dose calculation was performed. The fluence-based algorithm of MUV accounts for collimator transmission, rounded leaf ends, tongue-and-groove effect, backscatter to the monitor chamber and scatter from the flattening filter. The dose calculation utilizes a pencil beam model based on a beam quality index. DICOM RT files from patient plans, exported from the TPS, were directly used as patient-specific input data in MUV. For composite IMRT plans, average deviations in the high dose region between ionization chamber measurements and point dose calculations performed with the TPS and MUV were 1.6 ± 1.2% and 0.5 ± 1.1% (1 S.D.). The dose deviations between MUV and TPS slightly depended on the distance from the isocentre position. For individual intensity-modulated beams (total 367), an average deviation of 1.1 ± 2.9% was determined between calculations performed with the TPS and with MUV, with maximum deviations up to 14%. However, absolute dose deviations were mostly less than 3 cGy. Based on the current results, we aim to apply a confidence limit of 3% (with respect to the prescribed dose) or 6 cGy for routine IMRT verification. For off-axis points at distances larger than 5 cm and for low dose regions, we consider 5% dose deviation or 10 cGy acceptable. The time needed for an independent calculation compares very favourably with the net time for an experimental approach

Clinical Experience and Evaluation of Patient Treatment Verification With a Transit Dosimeter

Energy Technology Data Exchange (ETDEWEB)

Ricketts, Kate, E-mail: k.ricketts@ucl.ac.uk [Division of Surgery and Interventional Sciences, University College London, London (United Kingdom); Department of Radiotherapy Physics, Royal Berkshire NHS Foundation Trust, Reading (United Kingdom); Navarro, Clara; Lane, Katherine; Blowfield, Claire; Cotten, Gary; Tomala, Dee; Lord, Christine; Jones, Joanne; Adeyemi, Abiodun [Department of Radiotherapy Physics, Royal Berkshire NHS Foundation Trust, Reading (United Kingdom)

2016-08-01

Purpose: To prospectively evaluate a protocol for transit dosimetry on a patient population undergoing intensity modulated radiation therapy (IMRT) and to assess the issues in clinical implementation of electronic portal imaging devices (EPIDs) for treatment verification. Methods and Materials: Fifty-eight patients were enrolled in the study. Amorphous silicon EPIDs were calibrated for dose and used to acquire images of delivered fields. Measured EPID dose maps were back-projected using the planning computed tomographic (CT) images to calculate dose at prespecified points within the patient and compared with treatment planning system dose offline using point dose difference and point γ analysis. The deviation of the results was used to inform future action levels. Results: Two hundred twenty-five transit images were analyzed, composed of breast, prostate, and head and neck IMRT fields. Patient measurements demonstrated the potential of the dose verification protocol to model dose well under complex conditions: 83.8% of all delivered beams achieved the initial set tolerance level of Δ{sub D} of 0 ± 5 cGy or %Δ{sub D} of 0% ± 5%. Importantly, the protocol was also sensitive to anatomic changes and spotted that 3 patients from 20 measured prostate patients had undergone anatomic change in comparison with the planning CT. Patient data suggested an EPID-reconstructed versus treatment planning system dose difference action level of 0% ± 7% for breast fields. Asymmetric action levels were more appropriate for inversed IMRT fields, using absolute dose difference (−2 ± 5 cGy) or summed field percentage dose difference (−6% ± 7%). Conclusions: The in vivo dose verification method was easy to use and simple to implement, and it could detect patient anatomic changes that impacted dose delivery. The system required no extra dose to the patient or treatment time delay and so could be used throughout the course of treatment to identify and limit

Age verification cards fail to fully prevent minors from accessing tobacco products.

Science.gov (United States)

Kanda, Hideyuki; Osaki, Yoneatsu; Ohida, Takashi; Kaneita, Yoshitaka; Munezawa, Takeshi

2011-03-01

Proper age verification can prevent minors from accessing tobacco products. For this reason, electronic locking devices based on a proof-of age system utilising cards were installed in almost every tobacco vending machine across Japan and Germany to restrict sales to minors. We aimed to clarify the associations between amount smoked by high school students and the usage of age verification cards by conducting a nationwide cross-sectional survey of students in Japan. This survey was conducted in 2008. We asked high school students, aged 13-18 years, in Japan about their smoking behaviour, where they purchase cigarettes, if or if not they have used age verification cards, and if yes, how they obtained this card. As the amount smoked increased, the prevalence of purchasing cigarettes from vending machines also rose for both males and females. The percentage of those with experience of using an age verification card was also higher among those who smoked more. Somebody outside of family was the top source of obtaining cards. Surprisingly, around 5% of males and females belonging to the group with highest smoking levels applied for cards themselves. Age verification cards cannot fully prevent minors from accessing tobacco products. These findings suggest that a total ban of tobacco vending machines, not an age verification system, is needed to prevent sales to minors.

A Practitioners Perspective on Verification

Science.gov (United States)

Steenburgh, R. A.

2017-12-01

NOAAs Space Weather Prediction Center offers a wide range of products and services to meet the needs of an equally wide range of customers. A robust verification program is essential to the informed use of model guidance and other tools by both forecasters and end users alike. In this talk, we present current SWPC practices and results, and examine emerging requirements and potential approaches to satisfy them. We explore the varying verification needs of forecasters and end users, as well as the role of subjective and objective verification. Finally, we describe a vehicle used in the meteorological community to unify approaches to model verification and facilitate intercomparison.

Wavelet-based verification of the quantitative precipitation forecast

Science.gov (United States)

Yano, Jun-Ichi; Jakubiak, Bogumil

2016-06-01

This paper explores the use of wavelets for spatial verification of quantitative precipitation forecasts (QPF), and especially the capacity of wavelets to provide both localization and scale information. Two 24-h forecast experiments using the two versions of the Coupled Ocean/Atmosphere Mesoscale Prediction System (COAMPS) on 22 August 2010 over Poland are used to illustrate the method. Strong spatial localizations and associated intermittency of the precipitation field make verification of QPF difficult using standard statistical methods. The wavelet becomes an attractive alternative, because it is specifically designed to extract spatially localized features. The wavelet modes are characterized by the two indices for the scale and the localization. Thus, these indices can simply be employed for characterizing the performance of QPF in scale and localization without any further elaboration or tunable parameters. Furthermore, spatially-localized features can be extracted in wavelet space in a relatively straightforward manner with only a weak dependence on a threshold. Such a feature may be considered an advantage of the wavelet-based method over more conventional "object" oriented verification methods, as the latter tend to represent strong threshold sensitivities. The present paper also points out limits of the so-called "scale separation" methods based on wavelets. Our study demonstrates how these wavelet-based QPF verifications can be performed straightforwardly. Possibilities for further developments of the wavelet-based methods, especially towards a goal of identifying a weak physical process contributing to forecast error, are also pointed out.

Sample representativeness verification of the FADN CZ farm business sample

Directory of Open Access Journals (Sweden)

Marie Prášilová

2011-01-01

Full Text Available Sample representativeness verification is one of the key stages of statistical work. After having joined the European Union the Czech Republic joined also the Farm Accountancy Data Network system of the Union. This is a sample of bodies and companies doing business in agriculture. Detailed production and economic data on the results of farming business are collected from that sample annually and results for the entire population of the country´s farms are then estimated and assessed. It is important hence, that the sample be representative. Representativeness is to be assessed as to the number of farms included in the survey and also as to the degree of accordance of the measures and indices as related to the population. The paper deals with the special statistical techniques and methods of the FADN CZ sample representativeness verification including the necessary sample size statement procedure. The Czech farm population data have been obtained from the Czech Statistical Office data bank.

Guidance and Control Software Project Data - Volume 3: Verification Documents

Science.gov (United States)

Hayhurst, Kelly J. (Editor)

2008-01-01

The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes the verification documents from the GCS project. Volume 3 contains four appendices: A. Software Verification Cases and Procedures for the Guidance and Control Software Project; B. Software Verification Results for the Pluto Implementation of the Guidance and Control Software; C. Review Records for the Pluto Implementation of the Guidance and Control Software; and D. Test Results Logs for the Pluto Implementation of the Guidance and Control Software.

Empirical Tests and Preliminary Results with the Krakatoa Tool for Full Static Program Verification

Directory of Open Access Journals (Sweden)

Ramírez-de León Edgar Darío

2014-10-01

Full Text Available XJML (Ramírez et al., 2012 is a modular external platform for Verification and Validation of Java classes using the Java Modeling Language (JML through contracts written in XML. One problem faced in the XJML development was how to integrate Full Static Program Verification (FSPV. This paper presents the experiments and results that allowed us to define what tool to embed in XJML to execute FSPV.

Nuclear disarmament verification

International Nuclear Information System (INIS)

DeVolpi, A.

1993-01-01

Arms control treaties, unilateral actions, and cooperative activities -- reflecting the defusing of East-West tensions -- are causing nuclear weapons to be disarmed and dismantled worldwide. In order to provide for future reductions and to build confidence in the permanency of this disarmament, verification procedures and technologies would play an important role. This paper outlines arms-control objectives, treaty organization, and actions that could be undertaken. For the purposes of this Workshop on Verification, nuclear disarmament has been divided into five topical subareas: Converting nuclear-weapons production complexes, Eliminating and monitoring nuclear-weapons delivery systems, Disabling and destroying nuclear warheads, Demilitarizing or non-military utilization of special nuclear materials, and Inhibiting nuclear arms in non-nuclear-weapons states. This paper concludes with an overview of potential methods for verification

Verification Account Management System (VAMS)

Data.gov (United States)

Social Security Administration — The Verification Account Management System (VAMS) is the centralized location for maintaining SSA's verification and data exchange accounts. VAMS account management...

Quantum money with classical verification

Energy Technology Data Exchange (ETDEWEB)

Gavinsky, Dmitry [NEC Laboratories America, Princeton, NJ (United States)

2014-12-04

We propose and construct a quantum money scheme that allows verification through classical communication with a bank. This is the first demonstration that a secure quantum money scheme exists that does not require quantum communication for coin verification. Our scheme is secure against adaptive adversaries - this property is not directly related to the possibility of classical verification, nevertheless none of the earlier quantum money constructions is known to possess it.

Quantum money with classical verification

International Nuclear Information System (INIS)

Gavinsky, Dmitry

2014-01-01

We propose and construct a quantum money scheme that allows verification through classical communication with a bank. This is the first demonstration that a secure quantum money scheme exists that does not require quantum communication for coin verification. Our scheme is secure against adaptive adversaries - this property is not directly related to the possibility of classical verification, nevertheless none of the earlier quantum money constructions is known to possess it

Practical experience and economic aspects of small wind turbines

Energy Technology Data Exchange (ETDEWEB)

1984-01-01

Workshop proceedings presented cover operating experience and development of wind turbines installed in the UK by Northern Engineering Industries plc companies, the Howden aerogenerator installed in Orkney, and the commissioning of a vertical-axis generator in a remote location. The National Wind Turbine Test Centre, the Caithness Wind Project, the South of Scotland Electricity Board's activities, economics of small scale wind power and commercialisation are discussed.

ECONOMIC MODELING PROCESSES USING MATLAB

Directory of Open Access Journals (Sweden)

Anamaria G. MACOVEI

2008-06-01

Full Text Available To study economic phenomena and processes using mathem atical modeling, and to determine the approximatesolution to a problem we need to choose a method of calculation and a numerical computer program, namely thepackage of programs MatLab. Any economic process or phenomenon is a mathematical description of h is behavior,and thus draw up an economic and mathematical model that has the following stages: formulation of the problem, theanalysis process modeling, the production model and design verification, validation and implementation of the model.This article is presented an economic model and its modeling is using mathematical equations and software packageMatLab, which helps us approximation effective solution. As data entry is considered the net cost, the cost of direct andtotal cost and the link between them. I presented the basic formula for determining the total cost. Economic modelcalculations were made in MatLab software package and with graphic representation of its interpretation of the resultsachieved in terms of our specific problem.

Experience with civil plutonium management: Technology and economics

International Nuclear Information System (INIS)

Zarimpas, N.; Stevens, G.H.

1997-01-01

Recent NEA work on plutonium has been, essentially, targeted at economic and scientific aspects and the need to identify suitable technical solutions, despite the existing political uncertainties associated with their implementation. Such studies provide the facts and current views concerning plutonium and its civil use; address questions influencing the choice of fuel cycle options and illustrate how economic and logistic assessments of the alternatives could be undertaken. An ad-hoc expert group, with a membership drawn from fifteen countries and three international organisations, which was formed in early 1994 under the auspices of the NEA, with the task of identifying, examining and evaluating the broad technical questions related to plutonium management, has just published its work. This paper discusses the work and main conclusions of the expert group and focuses on the following two topics: Technologies, already implemented, which provide for short and medium-term storage of plutonium or for recycling the plutonium through reactors. A brief review is provided of experience gained with them and technical commentaries are made on their potential future deployment; Such technologies may, in the longer term, be joined by a further range which are, in some cases, already under development. Attention is drawn to those additional options that may become available. Another NEA expert group studied in detail the economics of the open and closed fuel cycles and reported, in 1994, its main findings: Some economic considerations of importance to various aspects of plutonium recycling are also presented in this paper. (author)

Particularities of Verification Processes for Distributed Informatics Applications

Directory of Open Access Journals (Sweden)

Ion IVAN

2013-01-01

Full Text Available This paper presents distributed informatics applications and characteristics of their development cycle. It defines the concept of verification and there are identified the differences from software testing. Particularities of the software testing and software verification processes are described. The verification steps and necessary conditions are presented and there are established influence factors of quality verification. Software optimality verification is analyzed and some metrics are defined for the verification process.

Nuclear test ban verification

International Nuclear Information System (INIS)

Chun, Kin-Yip

1991-07-01

This report describes verification and its rationale, the basic tasks of seismic verification, the physical basis for earthquake/explosion source discrimination and explosion yield determination, the technical problems pertaining to seismic monitoring of underground nuclear tests, the basic problem-solving strategy deployed by the forensic seismology resarch team at the University of Toronto, and the scientific significance of the team's research. The research carried out at the Univeristy of Toronto has two components: teleseismic verification using P wave recordings from the Yellowknife Seismic Array (YKA), and regional (close-in) verification using high-frequency L g and P n recordings from the Eastern Canada Telemetered Network. Major differences have been found in P was attenuation among the propagation paths connecting the YKA listening post with seven active nuclear explosion testing areas in the world. Significant revisions have been made to previously published P wave attenuation results, leading to more interpretable nuclear explosion source functions. (11 refs., 12 figs.)

A feasible method for clinical delivery verification and dose reconstruction in tomotherapy

International Nuclear Information System (INIS)

Kapatoes, J.M.; Olivera, G.H.; Ruchala, K.J.; Smilowitz, J.B.; Reckwerdt, P.J.; Mackie, T.R.

2001-01-01

Delivery verification is the process in which the energy fluence delivered during a treatment is verified. This verified energy fluence can be used in conjunction with an image in the treatment position to reconstruct the full three-dimensional dose deposited. A method for delivery verification that utilizes a measured database of detector signal is described in this work. This database is a function of two parameters, radiological path-length and detector-to-phantom distance, both of which are computed from a CT image taken at the time of delivery. Such a database was generated and used to perform delivery verification and dose reconstruction. Two experiments were conducted: a simulated prostate delivery on an inhomogeneous abdominal phantom, and a nasopharyngeal delivery on a dog cadaver. For both cases, it was found that the verified fluence and dose results using the database approach agreed very well with those using previously developed and proven techniques. Delivery verification with a measured database and CT image at the time of treatment is an accurate procedure for tomotherapy. The database eliminates the need for any patient-specific, pre- or post-treatment measurements. Moreover, such an approach creates an opportunity for accurate, real-time delivery verification and dose reconstruction given fast image reconstruction and dose computation tools

Clinical verification in homeopathy and allergic conditions.

Science.gov (United States)

Van Wassenhoven, Michel

2013-01-01

The literature on clinical research in allergic conditions treated with homeopathy includes a meta-analysis of randomised controlled trials (RCT) for hay fever with positive conclusions and two positive RCTs in asthma. Cohort surveys using validated Quality of Life questionnaires have shown improvement in asthma in children, general allergic conditions and skin diseases. Economic surveys have shown positive results in eczema, allergy, seasonal allergic rhinitis, asthma, food allergy and chronic allergic rhinitis. This paper reports clinical verification of homeopathic symptoms in all patients and especially in various allergic conditions in my own primary care practice. For preventive treatments in hay fever patients, Arsenicum album was the most effective homeopathic medicine followed by Nux vomica, Pulsatilla pratensis, Gelsemium, Sarsaparilla, Silicea and Natrum muriaticum. For asthma patients, Arsenicum iodatum appeared most effective, followed by Lachesis, Calcarea arsenicosa, Carbo vegetabilis and Silicea. For eczema and urticaria, Mezereum was most effective, followed by Lycopodium, Sepia, Arsenicum iodatum, Calcarea carbonica and Psorinum. The choice of homeopathic medicine depends on the presence of other associated symptoms and 'constitutional' features. Repertories should be updated by including results of such clinical verifications of homeopathic prescribing symptoms. Copyright © 2012 The Faculty of Homeopathy. Published by Elsevier Ltd. All rights reserved.

On the Verification of a WiMax Design Using Symbolic Simulation

Directory of Open Access Journals (Sweden)

Gabriela Nicolescu

2013-07-01

Full Text Available In top-down multi-level design methodologies, design descriptions at higher levels of abstraction are incrementally refined to the final realizations. Simulation based techniques have traditionally been used to verify that such model refinements do not change the design functionality. Unfortunately, with computer simulations it is not possible to completely check that a design transformation is correct in a reasonable amount of time, as the number of test patterns required to do so increase exponentially with the number of system state variables. In this paper, we propose a methodology for the verification of conformance of models generated at higher levels of abstraction in the design process to the design specifications. We model the system behavior using sequence of recurrence equations. We then use symbolic simulation together with equivalence checking and property checking techniques for design verification. Using our proposed method, we have verified the equivalence of three WiMax system models at different levels of design abstraction, and the correctness of various system properties on those models. Our symbolic modeling and verification experiments show that the proposed verification methodology provides performance advantage over its numerical counterpart.

A Feature Subtraction Method for Image Based Kinship Verification under Uncontrolled Environments

DEFF Research Database (Denmark)

Duan, Xiaodong; Tan, Zheng-Hua

2015-01-01

The most fundamental problem of local feature based kinship verification methods is that a local feature can capture the variations of environmental conditions and the differences between two persons having a kin relation, which can significantly decrease the performance. To address this problem...... the feature distance between face image pairs with kinship and maximize the distance between non-kinship pairs. Based on the subtracted feature, the verification is realized through a simple Gaussian based distance comparison method. Experiments on two public databases show that the feature subtraction method...

Java bytecode verification via static single assignment form

DEFF Research Database (Denmark)

Gal, Andreas; Probst, Christian W.; Franz, Michael

2008-01-01

Java Virtual Machines (JVMs) traditionally perform bytecode verification by way of an iterative data-flow analysis. Bytecode verification is necessary to ensure type safety because temporary variables in the JVM are not statically typed. We present an alternative verification mechanism that trans......Java Virtual Machines (JVMs) traditionally perform bytecode verification by way of an iterative data-flow analysis. Bytecode verification is necessary to ensure type safety because temporary variables in the JVM are not statically typed. We present an alternative verification mechanism...

Further development and verification of the calculating programme Felix for the simulation of criticality excursions

International Nuclear Information System (INIS)

Weber, J.; Denk, W.

1985-01-01

An improved version of the FELIX programme was applied to varify excursion experiments 01, 03 through 07, and 13. The correspondence of experiments and verification was good. Programme points to be further developed are shown. (orig.) [de

A Syntactic-Semantic Approach to Incremental Verification

OpenAIRE

Bianculli, Domenico; Filieri, Antonio; Ghezzi, Carlo; Mandrioli, Dino

2013-01-01

Software verification of evolving systems is challenging mainstream methodologies and tools. Formal verification techniques often conflict with the time constraints imposed by change management practices for evolving systems. Since changes in these systems are often local to restricted parts, an incremental verification approach could be beneficial. This paper introduces SiDECAR, a general framework for the definition of verification procedures, which are made incremental by the framework...

Verification of Ceramic Structures

Science.gov (United States)

Behar-Lafenetre, Stephanie; Cornillon, Laurence; Rancurel, Michael; De Graaf, Dennis; Hartmann, Peter; Coe, Graham; Laine, Benoit

2012-07-01

In the framework of the “Mechanical Design and Verification Methodologies for Ceramic Structures” contract [1] awarded by ESA, Thales Alenia Space has investigated literature and practices in affiliated industries to propose a methodological guideline for verification of ceramic spacecraft and instrument structures. It has been written in order to be applicable to most types of ceramic or glass-ceramic materials - typically Cesic®, HBCesic®, Silicon Nitride, Silicon Carbide and ZERODUR®. The proposed guideline describes the activities to be performed at material level in order to cover all the specific aspects of ceramics (Weibull distribution, brittle behaviour, sub-critical crack growth). Elementary tests and their post-processing methods are described, and recommendations for optimization of the test plan are given in order to have a consistent database. The application of this method is shown on an example in a dedicated article [7]. Then the verification activities to be performed at system level are described. This includes classical verification activities based on relevant standard (ECSS Verification [4]), plus specific analytical, testing and inspection features. The analysis methodology takes into account the specific behaviour of ceramic materials, especially the statistical distribution of failures (Weibull) and the method to transfer it from elementary data to a full-scale structure. The demonstration of the efficiency of this method is described in a dedicated article [8]. The verification is completed by classical full-scale testing activities. Indications about proof testing, case of use and implementation are given and specific inspection and protection measures are described. These additional activities are necessary to ensure the required reliability. The aim of the guideline is to describe how to reach the same reliability level as for structures made of more classical materials (metals, composites).

Is flow verification necessary

International Nuclear Information System (INIS)

Beetle, T.M.

1986-01-01

Safeguards test statistics are used in an attempt to detect diversion of special nuclear material. Under assumptions concerning possible manipulation (falsification) of safeguards accounting data, the effects on the statistics due to diversion and data manipulation are described algebraically. A comprehensive set of statistics that is capable of detecting any diversion of material is defined in terms of the algebraic properties of the effects. When the assumptions exclude collusion between persons in two material balance areas, then three sets of accounting statistics are shown to be comprehensive. Two of the sets contain widely known accountancy statistics. One of them does not require physical flow verification - comparisons of operator and inspector data for receipts and shipments. The third set contains a single statistic which does not require physical flow verification. In addition to not requiring technically difficult and expensive flow verification, this single statistic has several advantages over other comprehensive sets of statistics. This algebraic approach as an alternative to flow verification for safeguards accountancy is discussed in this paper

Procedure generation and verification

International Nuclear Information System (INIS)

Sheely, W.F.

1986-01-01

The Department of Energy has used Artificial Intelligence of ''AI'' concepts to develop two powerful new computer-based techniques to enhance safety in nuclear applications. The Procedure Generation System, and the Procedure Verification System, can be adapted to other commercial applications, such as a manufacturing plant. The Procedure Generation System can create a procedure to deal with the off-normal condition. The operator can then take correct actions on the system in minimal time. The Verification System evaluates the logic of the Procedure Generator's conclusions. This evaluation uses logic techniques totally independent of the Procedure Generator. The rapid, accurate generation and verification of corrective procedures can greatly reduce the human error, possible in a complex (stressful/high stress) situation

A Scalable Approach for Hardware Semiformal Verification

OpenAIRE

Grimm, Tomas; Lettnin, Djones; Hübner, Michael

2018-01-01

The current verification flow of complex systems uses different engines synergistically: virtual prototyping, formal verification, simulation, emulation and FPGA prototyping. However, none is able to verify a complete architecture. Furthermore, hybrid approaches aiming at complete verification use techniques that lower the overall complexity by increasing the abstraction level. This work focuses on the verification of complex systems at the RT level to handle the hardware peculiarities. Our r...

Certainty in Stockpile Computing: Recommending a Verification and Validation Program for Scientific Software

Energy Technology Data Exchange (ETDEWEB)

Lee, J.R.

1998-11-01

As computing assumes a more central role in managing the nuclear stockpile, the consequences of an erroneous computer simulation could be severe. Computational failures are common in other endeavors and have caused project failures, significant economic loss, and loss of life. This report examines the causes of software failure and proposes steps to mitigate them. A formal verification and validation program for scientific software is recommended and described.

Guidelines for the Economic Evaluation of Building-Integrated Photovoltaic Power Systems

Energy Technology Data Exchange (ETDEWEB)

Eiffert, P.; International Energy Agency (IEA) PVPS Task 7

2003-01-01

This report identifies the economic parameters of building-integrated PV (BIPV) systems. The guidelines are structured in three major parts: the investment analysis (methods and ownership issues), benefits, and costs. Measurement and verification are also discussed briefly.

Striving to be known by significant others: automatic activation of self-verification goals in relationship contexts.

Science.gov (United States)

Kraus, Michael W; Chen, Serena

2009-07-01

Extending research on the automatic activation of goals associated with significant others, the authors hypothesized that self-verification goals typically pursued with significant others are automatically elicited when a significant-other representation is activated. Supporting this hypothesis, the activation of a significant-other representation through priming (Experiments 1 and 3) or through a transference encounter (Experiment 2) led participants to seek feedback that verifies their preexisting self-views. Specifically, significant-other primed participants desired self-verifying feedback, in general (Experiment 1), from an upcoming interaction partner (Experiment 2), and relative to acquaintance-primed participants and favorable feedback (Experiment 3). Finally, self-verification goals were activated, especially for relational self-views deemed high in importance to participants' self-concepts (Experiment 2) and held with high certainty (Experiment 3). Implications for research on self-evaluative goals, the relational self, and the automatic goal activation literature are discussed, as are consequences for close relationships. (PsycINFO Database Record (c) 2009 APA, all rights reserved).

Formal Development and Verification of Railway Control Systems - In the context of ERTMS/ETCS Level 2

DEFF Research Database (Denmark)

Vu, Linh Hong

This dissertation presents a holistic, formal method for efficient modelling and verification of safety-critical railway control systems that have product line characteristics, i.e., each individual system is constructed by instantiating common generic applications with concrete configuration dat...... standardized railway control systems ERTMS/ETCS Level 2. Experiments showed that the method can be used for specification, verification and validation of systems of industrial size....

Interpolant Tree Automata and their Application in Horn Clause Verification

Directory of Open Access Journals (Sweden)

Bishoksan Kafle

2016-07-01

Full Text Available This paper investigates the combination of abstract interpretation over the domain of convex polyhedra with interpolant tree automata, in an abstraction-refinement scheme for Horn clause verification. These techniques have been previously applied separately, but are combined in a new way in this paper. The role of an interpolant tree automaton is to provide a generalisation of a spurious counterexample during refinement, capturing a possibly infinite set of spurious counterexample traces. In our approach these traces are then eliminated using a transformation of the Horn clauses. We compare this approach with two other methods; one of them uses interpolant tree automata in an algorithm for trace abstraction and refinement, while the other uses abstract interpretation over the domain of convex polyhedra without the generalisation step. Evaluation of the results of experiments on a number of Horn clause verification problems indicates that the combination of interpolant tree automaton with abstract interpretation gives some increase in the power of the verification tool, while sometimes incurring a performance overhead.

Survey on Offline Finger Print Verification System

NARCIS (Netherlands)

Suman, R.; Kaur, R.

2012-01-01

The fingerprint verification, means where "verification" implies a user matching a fingerprint against a single fingerprint associated with the identity that the user claims. Biometrics can be classified into two types Behavioral (signature verification, keystroke dynamics, etc.) And Physiological

ECONOMIC EXPERIENCES OF SINGLE MOTHERS IN BHAMBAYI, KWAZULU-NATAL, SOUTH AFRICA

Directory of Open Access Journals (Sweden)

Raniga, Tanusha

2014-10-01

Full Text Available Women living in low-income communities often initiate livelihood activities as a means to support themselves and their families. Even though these small-scale livelihood activities supplement the household income, they are insufficient to lift single mothers out of poverty. This study explores the economic experiences of 25 single mothers who embarked on individual livelihood activities. Using feminist theory, the paper presents their biographical profile and discusses two key themes, namely institutional barriers leading to economic insecurities, and the strengths and limitations of social networks. The paper concludes with some considerations for harnessing the valuable contributions made by single mothers.

In-core Instrument Subcritical Verification (INCISV) - Core Design Verification Method - 358

International Nuclear Information System (INIS)

Prible, M.C.; Heibel, M.D.; Conner, S.L.; Sebastiani, P.J.; Kistler, D.P.

2010-01-01

According to the standard on reload startup physics testing, ANSI/ANS 19.6.1, a plant must verify that the constructed core behaves sufficiently close to the designed core to confirm that the various safety analyses bound the actual behavior of the plant. A large portion of this verification must occur before the reactor operates at power. The INCISV Core Design Verification Method uses the unique characteristics of a Westinghouse Electric Company fixed in-core self powered detector design to perform core design verification after a core reload before power operation. A Vanadium self powered detector that spans the length of the active fuel region is capable of confirming the required core characteristics prior to power ascension; reactivity balance, shutdown margin, temperature coefficient and power distribution. Using a detector element that spans the length of the active fuel region inside the core provides a signal of total integrated flux. Measuring the integrated flux distributions and changes at various rodded conditions and plant temperatures, and comparing them to predicted flux levels, validates all core necessary core design characteristics. INCISV eliminates the dependence on various corrections and assumptions between the ex-core detectors and the core for traditional physics testing programs. This program also eliminates the need for special rod maneuvers which are infrequently performed by plant operators during typical core design verification testing and allows for safer startup activities. (authors)

Fingerprint verification prediction model in hand dermatitis.

Science.gov (United States)

Lee, Chew K; Chang, Choong C; Johor, Asmah; Othman, Puwira; Baba, Roshidah

2015-07-01

Hand dermatitis associated fingerprint changes is a significant problem and affects fingerprint verification processes. This study was done to develop a clinically useful prediction model for fingerprint verification in patients with hand dermatitis. A case-control study involving 100 patients with hand dermatitis. All patients verified their thumbprints against their identity card. Registered fingerprints were randomized into a model derivation and model validation group. Predictive model was derived using multiple logistic regression. Validation was done using the goodness-of-fit test. The fingerprint verification prediction model consists of a major criterion (fingerprint dystrophy area of ≥ 25%) and two minor criteria (long horizontal lines and long vertical lines). The presence of the major criterion predicts it will almost always fail verification, while presence of both minor criteria and presence of one minor criterion predict high and low risk of fingerprint verification failure, respectively. When none of the criteria are met, the fingerprint almost always passes the verification. The area under the receiver operating characteristic curve was 0.937, and the goodness-of-fit test showed agreement between the observed and expected number (P = 0.26). The derived fingerprint verification failure prediction model is validated and highly discriminatory in predicting risk of fingerprint verification in patients with hand dermatitis. © 2014 The International Society of Dermatology.

The verification basis of the PM-ALPHA code

Energy Technology Data Exchange (ETDEWEB)

Theofanous, T.G.; Yuen, W.W.; Angelini, S. [California Univ., Santa Barbara, CA (United States). Center for Risk Studies and Safety

1998-01-01

An overall verification approach for the PM-ALPHA code is presented and implemented. The approach consists of a stepwise testing procedure focused principally on the multifield aspects of the premixing phenomenon. Breakup is treated empirically, but it is shown that, through reasonable choices of the breakup parameters, consistent interpretations of existing integral premixing experiments can be obtained. The present capability is deemed adequate for bounding energetics evaluations. (author)

Automatic Verification of Railway Interlocking Systems: A Case Study

DEFF Research Database (Denmark)

Petersen, Jakob Lyng

1998-01-01

This paper presents experiences in applying formal verification to a large industrial piece of software. The are of application is railway interlocking systems. We try to prove requirements of the program controlling the Swedish railway Station Alingsås by using the decision procedure which...... express thoughts on what is needed in order to be able to successfully verify large real-life systems....

Lived experience of economic and political trends related to globalization.

Science.gov (United States)

Cushon, Jennifer A; Muhajarine, Nazeem; Labonte, Ronald

2010-01-01

A multi-method case study examined how the economic and political processes of globalization have influenced the determinants of health among low-income children in Saskatoon, Saskatchewan, Canada. This paper presents the results from the qualitative interview component of the case study. The purpose of the interviews was to uncover the lived experience of low-income families and their children in Saskatoon with regards to political and economic trends related to globalization, an important addition to the usual globalization and health research that relies primarily on cross-country regressions in which the personal impacts remain hidden. In-depth phenomenological interviews with 26 low-income parents of young children (aged zero to five) who were residents of Saskatoon. A combination of volunteer and criterion sampling was used. Interview questions were open-ended and based upon an analytical framework. Analysis proceeded through immersion in the data, a process of open coding, and finally through a process of selective coding. The larger case study and interviews indicate that globalization has largely not been benefiting low-income parents with young children. Low-income families with young children were struggling to survive, despite the tremendous economic growth occurring in Saskatchewan and Saskatoon at the time of the interviews. This often led to participants expressing a sense of helplessness, despair, isolation, and/or anger. Respondents' experiences suggest that globalization-related changes in social conditions and public policies and programs have great potential to negatively affect family health through either psychosocial effects in individuals and/or decreased levels of social cohesion in the community.

Design Development and Verification of a System Integrated Modular PWR

International Nuclear Information System (INIS)

Kim, S.-H.; Kim, K. K.; Chang, M. H.; Kang, C. S.; Park, G.-C.

2002-01-01

safety analyses for the SMART design have been performed and the results demonstrated that the key safety parameters of the limiting design base events do not violate the safety limits. Various fundamental thermal-hydraulic experiments were carried out during the design concept development to assure the fundamental behavior of major concepts of the SMART systems. Most technologies implemented into the SMART concept have been proven through the design and operation of the existing PWRs. Advanced design features require tests to confirm the performance of the design and to produce data for the design code verification. Tests including core flow distribution test, test of flow instability in steam generator, test of self-pressurizer performance, two-phase critical flow test with non-condensable gases, and high-temperature/high pressure integral thermal-hydraulic test are currently under preparation by installing equipment and facilities. The performance tests for key parts of MCP(Main Coolant pump) and CEDM(Control Element Drive mechanism) were performed. And also mechanical performance tests for the reactor assembly and major primary components will be carried out. Technical and economical evaluation for the commercialization of SMART were conducted by the Korean Nuclear Society (KNS) from August of 2000 to July 2001. Based on the results of the evaluation, the SMART technology is technically sound and has sufficient economic incentives for pursuing further development. Upon the completion of the basic design phase in March of 2002, the SMART design/engineering verification phase will be thus followed to conduct various separate effect tests and comprehensive integral tests as well as construction of the one fifth scaled pilot plant for demonstration of overall SMART performance. (author)

Quantitative reactive modeling and verification.

Science.gov (United States)

Henzinger, Thomas A

Formal verification aims to improve the quality of software by detecting errors before they do harm. At the basis of formal verification is the logical notion of correctness , which purports to capture whether or not a program behaves as desired. We suggest that the boolean partition of software into correct and incorrect programs falls short of the practical need to assess the behavior of software in a more nuanced fashion against multiple criteria. We therefore propose to introduce quantitative fitness measures for programs, specifically for measuring the function, performance, and robustness of reactive programs such as concurrent processes. This article describes the goals of the ERC Advanced Investigator Project QUAREM. The project aims to build and evaluate a theory of quantitative fitness measures for reactive models. Such a theory must strive to obtain quantitative generalizations of the paradigms that have been success stories in qualitative reactive modeling, such as compositionality, property-preserving abstraction and abstraction refinement, model checking, and synthesis. The theory will be evaluated not only in the context of software and hardware engineering, but also in the context of systems biology. In particular, we will use the quantitative reactive models and fitness measures developed in this project for testing hypotheses about the mechanisms behind data from biological experiments.

The Legacy of Parental Divorce: Social, economic and demographic experiences in adulthood

OpenAIRE

Kathleen E Kiernan

1997-01-01

This study addresses three questions. Firstly, to what extent does divorce during childhood have long-term consequences for the educational attainment, economic situation, partnership formation and dissolution, and parenthood behaviour in adulthood? We show that in most of these domains children who experience parental divorce in childhood have more negative experiences than children reared by both their parents. However, in answering our second question, as to whether child and family charac...

Border cases between autonomy and relevance: Economic sciences in Berlin--A natural experiment.

Science.gov (United States)

Düppe, Till

2015-06-01

The faculty of economics at today's Humboldt University in Berlin, as no other institution of economics, has witnessed three radical ruptures in its history: in 1933, National Socialism replaced the pluralism prevailing in the Weimar Republic by imposing a "German economics"; after WWII, GDR authorities replaced this NS regime by imposing a Marxist imperative, which after the fall of the wall was replaced by the Western standards of neoclassical economics. In reconstructing these three reforms, institutional history can serve as a context in which questions about the political nature of economic knowledge can be answered that remain speculative in a conceptual context. I thus present a natural experiment in the political epistemology of economics: How do economists respond to, resist, and stabilize, changing political regimes? How do economists renegotiate the autonomy of economic knowledge given changing demands as of its social task? Among others, I show that contrary to Robert Merton's old, but still widely held thesis in political epistemology-that the values of science are compatible only with democratic regimes-the totalitarian and authoritarian regimes created better conditions for methodological pluralism in economics than democratic society. Copyright © 2015 Elsevier Ltd. All rights reserved.

The effect of economic change and elite framing on support for welfare state retrenchment: a survey experiment

NARCIS (Netherlands)

Marx, P.; Schumacher, G.

2016-01-01

How do economic downturns affect citizens’ support for welfare state retrenchment? Existing observational studies fail to isolate the effect of economic conditions and the effect of elite framing of these conditions. We therefore designed a survey experiment to evaluate how economic change in

Signs of Social Class: The Experience of Economic Inequality in Everyday Life.

Science.gov (United States)

Kraus, Michael W; Park, Jun Won; Tan, Jacinth J X

2017-05-01

By some accounts, global economic inequality is at its highest point on record. The pernicious effects of this broad societal trend are striking: Rising inequality is linked to poorer health and well-being across countries, continents, and cultures. The economic and psychological forces that perpetuate inequality continue to be studied, and in this theoretical review, we examine the role of daily experiences of economic inequality-the communication of social class signals between interaction partners-in this process. We theorize that social class signals activate social comparison processes that strengthen group boundaries between the haves and have nots in society. In particular, we argue that class signals are a frequent, rapid, and accurate component of person perception, and we provide new data and analyses demonstrating the accuracy of class signaling in 60-s interactions, Facebook photographs, and isolated recordings of brief speech. We suggest that barriers to the reduction of economic inequality in society arise directly from this class signaling process through the augmentation of class boundaries and the elicitation of beliefs and behaviors that favor the economic status quo.

The discount rate in the economic evaluation of prevention: a thought experiment

NARCIS (Netherlands)

L.G.A. Bonneux (Luc); E. Birnie (Erwin)

2001-01-01

textabstractOBJECTIVES: In the standard economic model of evaluation, constant discount rates devalue the long term health benefits of prevention strongly. This study shows that it is unlikely that this reflects societal preference. DESIGN: A thought experiment in a

Atmospheric natural disasters in Serbia: Management experience and economic effects

Directory of Open Access Journals (Sweden)

Nikolić Jugoslav

2013-01-01

Full Text Available Natural disasters occur as a result of an action of natural forces and represent limitations in spatial planning and efficient spatial development, with different consequences in terms of scope on humans, living things and tangible property. Consequences can be ecological, economic, in terms of health, demographic, social, psychological, etc. Weather modification management involves policies, methods, techniques and technologies that affect atmospheric features in order to make atmospheric water useful for humans, while eliminating its negative effects. Highly significant risk of natural disasters in Serbia is related to hailstorm disasters and droughts as atmospheric elementary disasters. The goal of this paper is to present certain methodologies and experience in Serbia in the weather modification management, mainly in the hailstorm processes. This paper provides analysis and critical review of the methodology of an action, with the analysis of the economic benefits. Cost-benefit analysis of a hail suppression project in Serbia was performed. The results point to the economic justification of some aspects of artificial influence on weather disasters.

Quantitative analysis of patient-specific dosimetric IMRT verification

International Nuclear Information System (INIS)

Budgell, G J; Perrin, B A; Mott, J H L; Fairfoul, J; Mackay, R I

2005-01-01

Patient-specific dosimetric verification methods for IMRT treatments are variable, time-consuming and frequently qualitative, preventing evidence-based reduction in the amount of verification performed. This paper addresses some of these issues by applying a quantitative analysis parameter to the dosimetric verification procedure. Film measurements in different planes were acquired for a series of ten IMRT prostate patients, analysed using the quantitative parameter, and compared to determine the most suitable verification plane. Film and ion chamber verification results for 61 patients were analysed to determine long-term accuracy, reproducibility and stability of the planning and delivery system. The reproducibility of the measurement and analysis system was also studied. The results show that verification results are strongly dependent on the plane chosen, with the coronal plane particularly insensitive to delivery error. Unexpectedly, no correlation could be found between the levels of error in different verification planes. Longer term verification results showed consistent patterns which suggest that the amount of patient-specific verification can be safely reduced, provided proper caution is exercised: an evidence-based model for such reduction is proposed. It is concluded that dose/distance to agreement (e.g., 3%/3 mm) should be used as a criterion of acceptability. Quantitative parameters calculated for a given criterion of acceptability should be adopted in conjunction with displays that show where discrepancies occur. Planning and delivery systems which cannot meet the required standards of accuracy, reproducibility and stability to reduce verification will not be accepted by the radiotherapy community

Tracer experiment data sets for the verification of local and meso-scale atmospheric dispersion models including topographic effects

International Nuclear Information System (INIS)

Sartori, E.; Schuler, W.

1992-01-01

Software and data for nuclear energy applications are acquired, tested and distributed by several information centres; in particular, relevant computer codes are distributed internationally by the OECD/NEA Data Bank (France) and by ESTSC and EPIC/RSIC (United States). This activity is coordinated among the centres and is extended outside the OECD area through an arrangement with the IAEA. This article proposes more specifically a scheme for acquiring, storing and distributing atmospheric tracer experiment data (ATE) required for verification of atmospheric dispersion models especially the most advanced ones including topographic effects and specific to the local and meso-scale. These well documented data sets will form a valuable complement to the set of atmospheric dispersion computer codes distributed internationally. Modellers will be able to gain confidence in the predictive power of their models or to verify their modelling skills. (au)

Post-silicon and runtime verification for modern processors

CERN Document Server

Wagner, Ilya

2010-01-01

The purpose of this book is to survey the state of the art and evolving directions in post-silicon and runtime verification. The authors start by giving an overview of the state of the art in verification, particularly current post-silicon methodologies in use in the industry, both for the domain of processor pipeline design and for memory subsystems. They then dive into the presentation of several new post-silicon verification solutions aimed at boosting the verification coverage of modern processors, dedicating several chapters to this topic. The presentation of runtime verification solution

An Economic Model and Experiments to Understand Aluminum-Cerium Alloy Recycling

Science.gov (United States)

Iyer, Ananth V.; Lim, Heejong; Rios, Orlando; Sims, Zachary; Weiss, David

2018-04-01

We provide an economic model to understand the impact of adoption, sorting and pricing of scrap on the recycling of a new aluminum-cerium (AlCe) alloy for use in engine blocks in the automobile industry. The goal of the laboratory portion of this study is to investigate possible effects of cerium contamination on well-established aluminum recycling streams. Our methodology includes three components: (1) focused data gathering from industry supply chain participants, (2) experimental data through laboratory experiments to understand the impact of cerium on existing alloys and (3) an economic model to understand pricing incentives on a recycler's separation of AlCe engine blocks.

Foreign and domestic experience of economic development of the Arctic territories

Directory of Open Access Journals (Sweden)

Dmitriy A. Matviishin

2017-03-01

Full Text Available The article deals with the key aspects of the Arctic exploration. There is a brief description of the Arctic Council, as well as strategic goals, objectives, activities and resources used of member countries and observer organizations to achieve these goals. The resource base of the Arctic region is studied. The economic analysis of the Arctic territories by circumpolar states, including the characteristics of resource projects, is arranged. The features of the Russian and foreign approaches to the management of the economy in the Arctic are noted. The method of logical analysis, economic and statistical and historical methods are used in the research. The result is the scientific justification of advantages and potential of domestic experience of development of the Arctic, and also of the necessity of timely adaptation of economic approaches, investment policy and the legislation according to the current chalenges and tendencies.

Evaluation of Face Detection Algorithms for the Bank Client Identity Verification

Directory of Open Access Journals (Sweden)

Szczodrak Maciej

2017-06-01

Full Text Available Results of investigation of face detection algorithms efficiency in the banking client visual verification system are presented. The video recordings were made in real conditions met in three bank operating outlets employing a miniature industrial USB camera. The aim of the experiments was to check the practical usability of the face detection method in the biometric bank client verification system. The main assumption was to provide a simplified as much as possible user interaction with the application. Applied algorithms for face detection are described and achieved results of face detection in the real bank environment conditions are presented. Practical limitations of the application based on encountered problems are discussed.

Trojan technical specification verification project

International Nuclear Information System (INIS)

Bates, L.; Rickenback, M.

1991-01-01

The Trojan Technical Specification Verification (TTSV) project at the Trojan plant of Portland General Electric Company was motivated by the recognition that many numbers in the Trojan technical specifications (TTS) potentially lacked the consideration of instrument- and/or process-related errors. The plant setpoints were known to consider such errors, but many of the values associated with the limiting conditions for operation (LCO) did not. In addition, the existing plant instrument error analyses were based on industry values that do not reflect the Trojan plant-specific experience. The purpose of this project is to ensure that the Trojan plant setpoint and LCO values include plant-specific instrument error

[Uniqueness seeking behavior as a self-verification: an alternative approach to the study of uniqueness].

Science.gov (United States)

Yamaoka, S

1995-06-01

Uniqueness theory explains that extremely high perceived similarity between self and others evokes negative emotional reactions and causes uniqueness seeking behavior. However, the theory conceptualizes similarity so ambiguously that it appears to suffer from low predictive validity. The purpose of the current article is to propose an alternative explanation of uniqueness seeking behavior. It posits that perceived uniqueness deprivation is a threat to self-concepts, and therefore causes self-verification behavior. Two levels of self verification are conceived: one based on personal categorization and the other on social categorization. The present approach regards uniqueness seeking behavior as the personal-level self verification. To test these propositions, a 2 (very high or moderate similarity information) x 2 (with or without outgroup information) x 2 (high or low need for uniqueness) between-subject factorial-design experiment was conducted with 95 university students. Results supported the self-verification approach, and were discussed in terms of effects of uniqueness deprivation, levels of self-categorization, and individual differences in need for uniqueness.

You Can't See the Real Me: Attachment Avoidance, Self-Verification, and Self-Concept Clarity.

Science.gov (United States)

Emery, Lydia F; Gardner, Wendi L; Carswell, Kathleen L; Finkel, Eli J

2018-03-01

Attachment shapes people's experiences in their close relationships and their self-views. Although attachment avoidance and anxiety both undermine relationships, past research has primarily emphasized detrimental effects of anxiety on the self-concept. However, as partners can help people maintain stable self-views, avoidant individuals' negative views of others might place them at risk for self-concept confusion. We hypothesized that avoidance would predict lower self-concept clarity and that less self-verification from partners would mediate this association. Attachment avoidance was associated with lower self-concept clarity (Studies 1-5), an effect that was mediated by low self-verification (Studies 2-3). The association between avoidance and self-verification was mediated by less self-disclosure and less trust in partner feedback (Study 4). Longitudinally, avoidance predicted changes in self-verification, which in turn predicted changes in self-concept clarity (Study 5). Thus, avoidant individuals' reluctance to trust or become too close to others may result in hidden costs to the self-concept.

Dosimetric pre-treatment verification of IMRT using an EPID; clinical experience

International Nuclear Information System (INIS)

Zijtveld, Mathilda van; Dirkx, Maarten L.P.; Boer, Hans C.J. de; Heijmen, Ben J.M.

2006-01-01

Background and purpose: In our clinic a QA program for IMRT verification, fully based on dosimetric measurements with electronic portal imaging devices (EPID), has been running for over 3 years. The program includes a pre-treatment dosimetric check of all IMRT fields. During a complete treatment simulation at the linac, a portal dose image (PDI) is acquired with the EPID for each patient field and compared with a predicted PDI. In this paper, the results of this pre-treatment procedure are analysed, and intercepted errors are reported. An automated image analysis procedure is proposed to limit the number of fields that need human intervention in PDI comparison. Materials and methods: Most of our analyses are performed using the γ index with 3% local dose difference and 3 mm distance to agreement as reference values. Scalar parameters are derived from the γ values to summarize the agreement between measured and predicted 2D PDIs. Areas with all pixels having γ values larger than one are evaluated, making decisions based on clinically relevant criteria more straightforward. Results: In 270 patients, the pre-treatment checks revealed four clinically relevant errors. Calculation of statistics for a group of 75 patients showed that the patient-averaged mean γ value inside the field was 0.43 ± 0.13 (1 SD) and only 6.1 ± 6.8% of pixels had a γ value larger than one. With the proposed automated image analysis scheme, visual inspection of images can be avoided in 2/3 of the cases. Conclusion: EPIDs may be used for high accuracy and high resolution routine verification of IMRT fields to intercept clinically relevant dosimetric errors prior to the start of treatment. For the majority of fields, PDI comparison can fully rely on an automated procedure, avoiding excessive workload

Wind turbine power performance verification in complex terrain and wind farms

Energy Technology Data Exchange (ETDEWEB)

Friis Pedersen, T.; Gjerding, S.; Ingham, P.; Enevoldsen, P.; Kjaer Hansen, J.; Kanstrup Joergensen, H.

2002-04-01

The IEC/EN 61400-12 Ed 1 standard for wind turbine power performance testing is being revised. The standard will be divided into four documents. The first one of these is more or less a revision of the existing document on power performance measurements on individual wind turbines. The second one is a power performance verification procedure for individual wind turbines. The third is a power performance measurement procedure of whole wind farms, and the fourth is a power performance measurement procedure for non-grid (small) wind turbines. This report presents work that was made to support the basis for this standardisation work. The work addressed experience from several national and international research projects and contractual and field experience gained within the wind energy community on this matter. The work was wide ranging and addressed 'grey' areas of knowledge regarding existing methodologies, which has then been investigated in more detail. The work has given rise to a range of conclusions and recommendations regarding: guaranties on power curves in complex terrain; investors and bankers experience with verification of power curves; power performance in relation to regional correction curves for Denmark; anemometry and the influence of inclined flow. (au)

Being known, intimate, and valued: global self-verification and dyadic adjustment in couples and roommates.

Science.gov (United States)

Katz, Jennifer; Joiner, Thomas E

2002-02-01

We contend that close relationships provide adults with optimal opportunities for personal growth when relationship partners provide accurate, honest feedback. Accordingly, it was predicted that young adults would experience the relationship quality with relationship partners who evaluated them in a manner consistent their own self-evaluations. Three empirical tests of this self-verification hypothesis as applied to close dyads were conducted. In Study 1, young adults in dating relationships were most intimate with and somewhat more committed to partners when they perceived that partners evaluated them as they evaluated themselves. Self-verification effects were pronounced for those involved in more serious dating relationships. In Study 2, men reported the greatest esteem for same-sex roommates who evaluated them in a self-verifying manner. Results from Study 2 were replicated and extended to both male and female roommate dyads in Study 3. Further, self-verification effects were most pronounced for young adults with high emotional empathy. Results suggest that self-verification theory is useful for understanding dyadic adjustment across a variety of relational contexts in young adulthood. Implications of self-verification processes for adult personal development are outlined within an identity negotiation framework.

Experimental inventory verification system

International Nuclear Information System (INIS)

Steverson, C.A.; Angerman, M.I.

1991-01-01

As Low As Reasonably Achievable (ALARA) goals and Department of Energy (DOE) inventory requirements are frequently in conflict at facilities across the DOE complex. The authors wish, on one hand, to verify the presence of correct amounts of nuclear materials that are in storage or in process; yet on the other hand, we wish to achieve ALARA goals by keeping individual and collective exposures as low as social, technical, economic, practical, and public policy considerations permit. The Experimental Inventory Verification System (EIVSystem) is a computer-based, camera-driven system that utilizes image processing technology to detect change in vault areas. Currently in the test and evaluation phase at Idaho National Engineering Laboratory, this system guards personnel. The EIVSystem continually monitors the vault, providing proof of changed status for objects sorted within the vault. This paper reports that these data could provide the basis for reducing inventory requirements when no change has occurred, thus helping implement ALARA policy; the data will also help describe there target area of an inventory when change has been shown to occur

Specification and Verification of Hybrid System

International Nuclear Information System (INIS)

Widjaja, Belawati H.

1997-01-01

Hybrid systems are reactive systems which intermix between two components, discrete components and continuous components. The continuous components are usually called plants, subject to disturbances which cause the state variables of the systems changing continuously by physical laws and/or by the control laws. The discrete components can be digital computers, sensor and actuators controlled by programs. These programs are designed to select, control and supervise the behavior of the continuous components. Specification and verification of hybrid systems has recently become an active area of research in both computer science and control engineering, many papers concerning hybrid system have been published. This paper gives a design methodology for hybrid systems as an example to the specification and verification of hybrid systems. The design methodology is based on the cooperation between two disciplines, control engineering and computer science. The methodology brings into the design of control loops and decision loops. The external behavior of control loops are specified in a notation which is understandable by the two disciplines. The design of control loops which employed theory of differential equation is done by control engineers, and its correctness is also guaranteed analytically or experimentally by control engineers. The decision loops are designed in computing science based on the specifications of control loops. The verification of systems requirements can be done by computing scientists using a formal reasoning mechanism. For illustrating the proposed design, a problem of balancing an inverted pendulum which is a popular experiment device in control theory is considered, and the Mean Value Calculus is chosen as a formal notation for specifying the control loops and designing the decision loops

Finite element program ARKAS: verification for IAEA benchmark problem analysis on core-wide mechanical analysis of LMFBR cores

International Nuclear Information System (INIS)

Nakagawa, M.; Tsuboi, Y.

1990-01-01

''ARKAS'' code verification, with the problems set in the International Working Group on Fast Reactors (IWGFR) Coordinated Research Programme (CRP) on the inter-comparison between liquid metal cooled fast breeder reactor (LMFBR) Core Mechanics Codes, is discussed. The CRP was co-ordinated by the IWGFR around problems set by Dr. R.G. Anderson (UKAEA) and arose from the IWGFR specialists' meeting on The Predictions and Experience of Core Distortion Behaviour (ref. 2). The problems for the verification (''code against code'') and validation (''code against experiment'') were set and calculated by eleven core mechanics codes from nine countries. All the problems have been completed and were solved with the core structural mechanics code ARKAS. Predictions by ARKAS agreed very well with other solutions for the well-defined verification problems. For the validation problems based on Japanese ex-reactor 2-D thermo-elastic experiments, the agreements between measured and calculated values were fairly good. This paper briefly describes the numerical model of the ARKAS code, and discusses some typical results. (author)

RESRAD-BUILD verification

International Nuclear Information System (INIS)

Kamboj, S.; Yu, C.; Biwer, B. M.; Klett, T.

2002-01-01

The results generated by the RESRAD-BUILD code (version 3.0) were verified with hand or spreadsheet calculations using equations given in the RESRAD-BUILD manual for different pathways. For verification purposes, different radionuclides--H-3, C-14, Na-22, Al-26, Cl-36, Mn-54, Co-60, Au-195, Ra-226, Ra-228, Th-228, and U-238--were chosen to test all pathways and models. Tritium, Ra-226, and Th-228 were chosen because of the special tritium and radon models in the RESRAD-BUILD code. Other radionuclides were selected to represent a spectrum of radiation types and energies. Verification of the RESRAD-BUILD code was conducted with an initial check of all the input parameters for correctness against their original source documents. Verification of the calculations was performed external to the RESRAD-BUILD code with Microsoft Excel to verify all the major portions of the code. In some cases, RESRAD-BUILD results were compared with those of external codes, such as MCNP (Monte Carlo N-particle) and RESRAD. The verification was conducted on a step-by-step basis and used different test cases as templates. The following types of calculations were investigated: (1) source injection rate, (2) air concentration in the room, (3) air particulate deposition, (4) radon pathway model, (5) tritium model for volume source, (6) external exposure model, (7) different pathway doses, and (8) time dependence of dose. Some minor errors were identified in version 3.0; these errors have been corrected in later versions of the code. Some possible improvements in the code were also identified

THE CONTENT OF AN ECONOMIC CATEGORY AND THE MEASUREMENT OF THE MARKET DEMAND

Directory of Open Access Journals (Sweden)

Anatoly V. Korotkov

2014-01-01

Full Text Available The aim of the article is to study the economic and statistical categories and levels of consumer demand. There is no uniformity in the interpretation of the content of an economic category and demand level in the literature on the economic theory and applied research of the market. We want to conduct the verification of the demand category, a consolidation of the wording of measuring the level of demand, the classification of demand. Theoretical basis of the conducted research is the methodology of the economic theory and the general theory of statistics.

Integrated Disposal Facility FY 2016: ILAW Verification and Validation of the eSTOMP Simulator

Energy Technology Data Exchange (ETDEWEB)

Freedman, Vicky L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bacon, Diana H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fang, Yilin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-05-13

This document describes two sets of simulations carried out to further verify and validate the eSTOMP simulator. In this report, a distinction is made between verification and validation, and the focus is on verifying eSTOMP through a series of published benchmarks on cementitious wastes, and validating eSTOMP based on a lysimeter experiment for the glassified waste. These activities are carried out within the context of a scientific view of validation that asserts that models can only be invalidated, and that model validation (and verification) is a subjective assessment.

Spent fuel verification options for final repository safeguards in Finland. A study on verification methods, their feasibility and safety aspects

International Nuclear Information System (INIS)

Hautamaeki, J.; Tiitta, A.

2000-12-01

The verification possibilities of the spent fuel assemblies from the Olkiluoto and Loviisa NPPs and the fuel rods from the research reactor of VTT are contemplated in this report. The spent fuel assemblies have to be verified at the partial defect level before the final disposal into the geologic repository. The rods from the research reactor may be verified at the gross defect level. Developing a measurement system for partial defect verification is a complicated and time-consuming task. The Passive High Energy Gamma Emission Tomography and the Fork Detector combined with Gamma Spectrometry are the most potential measurement principles to be developed for this purpose. The whole verification process has to be planned to be as slick as possible. An early start in the planning of the verification and developing the measurement devices is important in order to enable a smooth integration of the verification measurements into the conditioning and disposal process. The IAEA and Euratom have not yet concluded the safeguards criteria for the final disposal. E.g. criteria connected to the selection of the best place to perform the verification. Measurements have not yet been concluded. Options for the verification places have been considered in this report. One option for a verification measurement place is the intermediate storage. The other option is the encapsulation plant. Crucial viewpoints are such as which one offers the best practical possibilities to perform the measurements effectively and which would be the better place in the safeguards point of view. Verification measurements may be needed both in the intermediate storages and in the encapsulation plant. In this report also the integrity of the fuel assemblies after wet intermediate storage period is assessed, because the assemblies have to stand the handling operations of the verification measurements. (orig.)

An investigation of the effects of relevant samples and a comparison of verification versus discovery based lab design

Science.gov (United States)

Rieben, James C., Jr.

This study focuses on the effects of relevance and lab design on student learning within the chemistry laboratory environment. A general chemistry conductivity of solutions experiment and an upper level organic chemistry cellulose regeneration experiment were employed. In the conductivity experiment, the two main variables studied were the effect of relevant (or "real world") samples on student learning and a verification-based lab design versus a discovery-based lab design. With the cellulose regeneration experiment, the effect of a discovery-based lab design vs. a verification-based lab design was the sole focus. Evaluation surveys consisting of six questions were used at three different times to assess student knowledge of experimental concepts. In the general chemistry laboratory portion of this study, four experimental variants were employed to investigate the effect of relevance and lab design on student learning. These variants consisted of a traditional (or verification) lab design, a traditional lab design using "real world" samples, a new lab design employing real world samples/situations using unknown samples, and the new lab design using real world samples/situations that were known to the student. Data used in this analysis were collected during the Fall 08, Winter 09, and Fall 09 terms. For the second part of this study a cellulose regeneration experiment was employed to investigate the effects of lab design. A demonstration creating regenerated cellulose "rayon" was modified and converted to an efficient and low-waste experiment. In the first variant students tested their products and verified a list of physical properties. In the second variant, students filled in a blank physical property chart with their own experimental results for the physical properties. Results from the conductivity experiment show significant student learning of the effects of concentration on conductivity and how to use conductivity to differentiate solution types with the

Verification of safety critical software

International Nuclear Information System (INIS)

Son, Ki Chang; Chun, Chong Son; Lee, Byeong Joo; Lee, Soon Sung; Lee, Byung Chai

1996-01-01

To assure quality of safety critical software, software should be developed in accordance with software development procedures and rigorous software verification and validation should be performed. Software verification is the formal act of reviewing, testing of checking, and documenting whether software components comply with the specified requirements for a particular stage of the development phase[1]. New software verification methodology was developed and was applied to the Shutdown System No. 1 and 2 (SDS1,2) for Wolsung 2,3 and 4 nuclear power plants by Korea Atomic Energy Research Institute(KAERI) and Atomic Energy of Canada Limited(AECL) in order to satisfy new regulation requirements of Atomic Energy Control Boars(AECB). Software verification methodology applied to SDS1 for Wolsung 2,3 and 4 project will be described in this paper. Some errors were found by this methodology during the software development for SDS1 and were corrected by software designer. Outputs from Wolsung 2,3 and 4 project have demonstrated that the use of this methodology results in a high quality, cost-effective product. 15 refs., 6 figs. (author)

Future of monitoring and verification

International Nuclear Information System (INIS)

Wagenmakers, H.

1991-01-01

The organized verification entrusted to IAEA for the implementation of the NPT, of the Treaty of Tlatelolco and of the Treaty of Rarotonga, reaches reasonable standards. The current dispute with the Democratic People's Republic of Korea about the conclusion of a safeguards agreement with IAEA, by its exceptional nature, underscores rather than undermines the positive judgement to be passed on IAEA's overall performance. The additional task given to the Director General of IAEA under Security Council resolution 687 (1991) regarding Iraq's nuclear-weapons-usable material is particularly challenging. For the purposes of this paper, verification is defined as the process for establishing whether the States parties are complying with an agreement. In the final stage verification may lead into consideration of how to respond to non-compliance. Monitoring is perceived as the first level in the verification system. It is one generic form of collecting information on objects, activities or events and it involves a variety of instruments ranging from communications satellites to television cameras or human inspectors. Monitoring may also be used as a confidence-building measure

Concepts for inventory verification in critical facilities

International Nuclear Information System (INIS)

Cobb, D.D.; Sapir, J.L.; Kern, E.A.; Dietz, R.J.

1978-12-01

Materials measurement and inventory verification concepts for safeguarding large critical facilities are presented. Inspection strategies and methods for applying international safeguards to such facilities are proposed. The conceptual approach to routine inventory verification includes frequent visits to the facility by one inspector, and the use of seals and nondestructive assay (NDA) measurements to verify the portion of the inventory maintained in vault storage. Periodic verification of the reactor inventory is accomplished by sampling and NDA measurement of in-core fuel elements combined with measurements of integral reactivity and related reactor parameters that are sensitive to the total fissile inventory. A combination of statistical sampling and NDA verification with measurements of reactor parameters is more effective than either technique used by itself. Special procedures for assessment and verification for abnormal safeguards conditions are also considered. When the inspection strategies and inventory verification methods are combined with strict containment and surveillance methods, they provide a high degree of assurance that any clandestine attempt to divert a significant quantity of fissile material from a critical facility inventory will be detected. Field testing of specific hardware systems and procedures to determine their sensitivity, reliability, and operational acceptability is recommended. 50 figures, 21 tables

Verification and Examination Management of Complex Systems

Directory of Open Access Journals (Sweden)

Stian Ruud

2014-10-01

Full Text Available As ship systems become more complex, with an increasing number of safety-critical functions, many interconnected subsystems, tight integration to other systems, and a large amount of potential failure modes, several industry parties have identified the need for improved methods for managing the verification and examination efforts of such complex systems. Such needs are even more prominent now that the marine and offshore industries are targeting more activities and operations in the Arctic environment. In this paper, a set of requirements and a method for verification and examination management are proposed for allocating examination efforts to selected subsystems. The method is based on a definition of a verification risk function for a given system topology and given requirements. The marginal verification risks for the subsystems may then be evaluated, so that examination efforts for the subsystem can be allocated. Two cases of requirements and systems are used to demonstrate the proposed method. The method establishes a systematic relationship between the verification loss, the logic system topology, verification method performance, examination stop criterion, the required examination effort, and a proposed sequence of examinations to reach the examination stop criterion.

Monitoring and verification R and D

International Nuclear Information System (INIS)

Pilat, Joseph F.; Budlong-Sylvester, Kory W.; Fearey, Bryan L.

2011-01-01

The 2010 Nuclear Posture Review (NPR) report outlined the Administration's approach to promoting the agenda put forward by President Obama in Prague on April 5, 2009. The NPR calls for a national monitoring and verification R and D program to meet future challenges arising from the Administration's nonproliferation, arms control and disarmament agenda. Verification of a follow-on to New START could have to address warheads and possibly components along with delivery capabilities. Deeper cuts and disarmament would need to address all of these elements along with nuclear weapon testing, nuclear material and weapon production facilities, virtual capabilities from old weapon and existing energy programs and undeclared capabilities. We only know how to address some elements of these challenges today, and the requirements may be more rigorous in the context of deeper cuts as well as disarmament. Moreover, there is a critical need for multiple options to sensitive problems and to address other challenges. There will be other verification challenges in a world of deeper cuts and disarmament, some of which we are already facing. At some point, if the reductions process is progressing, uncertainties about past nuclear materials and weapons production will have to be addressed. IAEA safeguards will need to continue to evolve to meet current and future challenges, and to take advantage of new technologies and approaches. Transparency/verification of nuclear and dual-use exports will also have to be addressed, and there will be a need to make nonproliferation measures more watertight and transparent. In this context, and recognizing we will face all of these challenges even if disarmament is not achieved, this paper will explore possible agreements and arrangements; verification challenges; gaps in monitoring and verification technologies and approaches; and the R and D required to address these gaps and other monitoring and verification challenges.

Dual-use benefits of the CTBT verification system

International Nuclear Information System (INIS)

Meade, C.E.F.

1999-01-01

Since it has been completed in September 1996, the CTBT has been signed by 151 countries. Awaiting the 44 ratifications and entry into force, all of the nuclear powers have imposed unilateral moratoriums on nuclear test explosions. The end of these weapons development activities is often cited as the principal benefit of the CTBT. As the world begins to implement the Treaty, it has become clear that the development and operation of the CTBT verification system will provide a wide range of additional benefits if the data analysis products are available for dual-purpose applications. As this paper describes these could have economic and social implications, especially for countries with limited technical infrastructures. These involve, seismic monitoring, mineral exploration, scientific and technical training

VEG-01: Veggie Hardware Verification Testing

Science.gov (United States)

Massa, Gioia; Newsham, Gary; Hummerick, Mary; Morrow, Robert; Wheeler, Raymond

2013-01-01

The Veggie plant/vegetable production system is scheduled to fly on ISS at the end of2013. Since much of the technology associated with Veggie has not been previously tested in microgravity, a hardware validation flight was initiated. This test will allow data to be collected about Veggie hardware functionality on ISS, allow crew interactions to be vetted for future improvements, validate the ability of the hardware to grow and sustain plants, and collect data that will be helpful to future Veggie investigators as they develop their payloads. Additionally, food safety data on the lettuce plants grown will be collected to help support the development of a pathway for the crew to safely consume produce grown on orbit. Significant background research has been performed on the Veggie plant growth system, with early tests focusing on the development of the rooting pillow concept, and the selection of fertilizer, rooting medium and plant species. More recent testing has been conducted to integrate the pillow concept into the Veggie hardware and to ensure that adequate water is provided throughout the growth cycle. Seed sanitation protocols have been established for flight, and hardware sanitation between experiments has been studied. Methods for shipping and storage of rooting pillows and the development of crew procedures and crew training videos for plant activities on-orbit have been established. Science verification testing was conducted and lettuce plants were successfully grown in prototype Veggie hardware, microbial samples were taken, plant were harvested, frozen, stored and later analyzed for microbial growth, nutrients, and A TP levels. An additional verification test, prior to the final payload verification testing, is desired to demonstrate similar growth in the flight hardware and also to test a second set of pillows containing zinnia seeds. Issues with root mat water supply are being resolved, with final testing and flight scheduled for later in 2013.

Role of IGRT in patient positioning and verification

International Nuclear Information System (INIS)

Mijnheer, Ben

2008-01-01

Image-guided radiation therapy is 'Frequent imaging in the treatment room during a course of radiotherapy to guide the treatment process'. Instrumentation related to IGRT is highlighted. Focus of the lecture was on clinical experience gained by NKI-AVL, such as the use of EPID (electronic portal imaging devices) and CBCT (cone beam computed tomography) and their comparison: good results for head and neck and prostate/bladder patients: portal imaging was replaced by CBCT. After further investigation convincing results for lung patients were obtained: portal imaging was replaced by CBCT. Scan protocols were developed for these patient groups. Since February 2004 CBCT-based decision rules have been developed for: Head and Neck (Bony anatomy); Prostate (Bony anatomy; Soft tissue registration); Lung (Bony anatomy, Soft tissue registration); Brain (Bony anatomy); and Breast, bladder and liver (in progress). Final remarks are as follows: The introduction of various IGRT techniques allowed 3D verification of the position of target volumes and organs at risk just before or during treatment. Because the information is in 3D, or sometimes even in 4D, in principle these IGRT approaches provide more information compared to the use of 2D verification methods (e.g. EPIDs). Clinical data are becoming available to assess quantitatively for which treatment techniques IGRT approaches are advantageous compared to the use of conventional verification methods taking the additional resources (time, money, manpower) into account. (P.A.)

Face Verification for Mobile Personal Devices

NARCIS (Netherlands)

Tao, Q.

2009-01-01

In this thesis, we presented a detailed study of the face verification problem on the mobile device, covering every component of the system. The study includes face detection, registration, normalization, and verification. Furthermore, the information fusion problem is studied to verify face

Gender Verification of Female Olympic Athletes.

Science.gov (United States)

Dickinson, Barry D.; Genel, Myron; Robinowitz, Carolyn B.; Turner, Patricia L.; Woods, Gary L.

2002-01-01

Gender verification of female athletes has long been criticized by geneticists, endocrinologists, and others in the medical community. Recently, the International Olympic Committee's Athletic Commission called for discontinuation of mandatory laboratory-based gender verification of female athletes. This article discusses normal sexual…

Reload core safety verification

International Nuclear Information System (INIS)

Svetlik, M.; Minarcin, M.

2003-01-01

This paper presents a brief look at the process of reload core safety evaluation and verification in Slovak Republic. It gives an overview of experimental verification of selected nuclear parameters in the course of physics testing during reactor start-up. The comparison of IAEA recommendations and testing procedures at Slovak and European nuclear power plants of similar design is included. An introduction of two level criteria for evaluation of tests represents an effort to formulate the relation between safety evaluation and measured values (Authors)

Validation of Embedded System Verification Models

NARCIS (Netherlands)

Marincic, J.; Mader, Angelika H.; Wieringa, Roelf J.

The result of a model-based requirements verification shows that the model of a system satisfies (or not) formalised system requirements. The verification result is correct only if the model represents the system adequately. No matter what modelling technique we use, what precedes the model

On Verification Modelling of Embedded Systems

NARCIS (Netherlands)

Brinksma, Hendrik; Mader, Angelika H.

Computer-aided verification of embedded systems hinges on the availability of good verification models of the systems at hand. Such models must be much simpler than full design models or specifications to be of practical value, because of the unavoidable combinatorial complexities in the

Compositional verification of real-time systems using Ecdar

DEFF Research Database (Denmark)

David, Alexandre; Larsen, Kim Guldstrand; Legay, Axel

2012-01-01

We present a specification theory for timed systems implemented in the Ecdar tool. We illustrate the operations of the specification theory on a running example, showing the models and verification checks. To demonstrate the power of the compositional verification, we perform an in depth case study...... of a leader election protocol; Modeling it in Ecdar as Timed input/output automata Specifications and performing both monolithic and compositional verification of two interesting properties on it. We compare the execution time of the compositional to the classical verification showing a huge difference...

High-Resolution Fast-Neutron Spectrometry for Arms Control and Treaty Verification

Energy Technology Data Exchange (ETDEWEB)

David L. Chichester; James T. Johnson; Edward H. Seabury

2012-07-01

Many nondestructive nuclear analysis techniques have been developed to support the measurement needs of arms control and treaty verification, including gross photon and neutron counting, low- and high-resolution gamma spectrometry, time-correlated neutron measurements, and photon and neutron imaging. One notable measurement technique that has not been extensively studied to date for these applications is high-resolution fast-neutron spectrometry (HRFNS). Applied for arms control and treaty verification, HRFNS has the potential to serve as a complimentary measurement approach to these other techniques by providing a means to either qualitatively or quantitatively determine the composition and thickness of non-nuclear materials surrounding neutron-emitting materials. The technique uses the normally-occurring neutrons present in arms control and treaty verification objects of interest as an internal source of neutrons for performing active-interrogation transmission measurements. Most low-Z nuclei of interest for arms control and treaty verification, including 9Be, 12C, 14N, and 16O, possess fast-neutron resonance features in their absorption cross sections in the 0.5- to 5-MeV energy range. Measuring the selective removal of source neutrons over this energy range, assuming for example a fission-spectrum starting distribution, may be used to estimate the stoichiometric composition of intervening materials between the neutron source and detector. At a simpler level, determination of the emitted fast-neutron spectrum may be used for fingerprinting 'known' assemblies for later use in template-matching tests. As with photon spectrometry, automated analysis of fast-neutron spectra may be performed to support decision making and reporting systems protected behind information barriers. This paper will report recent work at Idaho National Laboratory to explore the feasibility of using HRFNS for arms control and treaty verification applications, including simulations

Economic Integration and Foreign Direct Investment: Review of Main Theoretical Concepts

Directory of Open Access Journals (Sweden)

Adam MARSZK

2014-10-01

Full Text Available The objective of the article is to present key theoretical relationships between economic integration and FDI flows. The research method used is a comprehensive literature review. Most influential publications, including books, articles, working papers, etc. contributing to the subject were identified. The review consists of two essential parts: theory of FDI, and theoretical relationships between economic integration and FDI flows. Finally, the outlined publications were discussed and critiqued, including the empirical context, i.e. empirical verification of the presented links.

A Model for Collaborative Runtime Verification

NARCIS (Netherlands)

Testerink, Bas; Bulling, Nils; Dastani, Mehdi

2015-01-01

Runtime verification concerns checking whether a system execution satisfies a given property. In this paper we propose a model for collaborative runtime verification where a network of local monitors collaborates in order to verify properties of the system. A local monitor has only a local view on

HDM/PASCAL Verification System User's Manual

Science.gov (United States)

Hare, D.

1983-01-01

The HDM/Pascal verification system is a tool for proving the correctness of programs written in PASCAL and specified in the Hierarchical Development Methodology (HDM). This document assumes an understanding of PASCAL, HDM, program verification, and the STP system. The steps toward verification which this tool provides are parsing programs and specifications, checking the static semantics, and generating verification conditions. Some support functions are provided such as maintaining a data base, status management, and editing. The system runs under the TOPS-20 and TENEX operating systems and is written in INTERLISP. However, no knowledge is assumed of these operating systems or of INTERLISP. The system requires three executable files, HDMVCG, PARSE, and STP. Optionally, the editor EMACS should be on the system in order for the editor to work. The file HDMVCG is invoked to run the system. The files PARSE and STP are used as lower forks to perform the functions of parsing and proving.

Self-verification and contextualized self-views.

Science.gov (United States)

Chen, Serena; English, Tammy; Peng, Kaiping

2006-07-01

Whereas most self-verification research has focused on people's desire to verify their global self-conceptions, the present studies examined self-verification with regard to contextualized selfviews-views of the self in particular situations and relationships. It was hypothesized that individuals whose core self-conceptions include contextualized self-views should seek to verify these self-views. In Study 1, the more individuals defined the self in dialectical terms, the more their judgments were biased in favor of verifying over nonverifying feedback about a negative, situation-specific self-view. In Study 2, consistent with research on gender differences in the importance of relationships to the self-concept, women but not men showed a similar bias toward feedback about a negative, relationship-specific self-view, a pattern not seen for global self-views. Together, the results support the notion that self-verification occurs for core self-conceptions, whatever form(s) they may take. Individual differences in self-verification and the nature of selfhood and authenticity are discussed.

The backfitting process and its verification

International Nuclear Information System (INIS)

Del Nero, G.; Grimaldi, G.

1990-01-01

Backfitting of plants in operation is based on: - compliance with new standards and regulations, - lessons learned from operating experience. This goal can be more effectively achieved on the basis of a valid methodology of analysis and a consistent process of collection, storage and retrieval of the operating data. The general backfitting problem, the verification process and the utilization of TPA as mean to assess backfitting are illustrated. The results of the analyses performed on Caorso plant are presented as well, using some specially designed software tools Management more than hardware problems are focused. Some general conclusions are then presented as final results of the whole work

Six years of experience in the planning and verification of the IMRT dynamics with portal dosimetry

International Nuclear Information System (INIS)

Molina Lopez, M. Y.; Pardo Perez, E.; Ruiz Maqueda, S.; Castro Novais, J.; Diaz Gavela, A. A.

2013-01-01

The objective of this study is the make a review of the method of verification of the IMRT throughout the 6 years of functioning of the service of-radiophysics and radiology protection, analyzing the parameters of each field evaluation to the 718 made IMRT during this period. (Author)

A Verification Logic for GOAL Agents

Science.gov (United States)

Hindriks, K. V.

Although there has been a growing body of literature on verification of agents programs, it has been difficult to design a verification logic for agent programs that fully characterizes such programs and to connect agent programs to agent theory. The challenge is to define an agent programming language that defines a computational framework but also allows for a logical characterization useful for verification. The agent programming language GOAL has been originally designed to connect agent programming to agent theory and we present additional results here that GOAL agents can be fully represented by a logical theory. GOAL agents can thus be said to execute the corresponding logical theory.

Towards the development of a rapid, portable, surface enhanced Raman spectroscopy based cleaning verification system for the drug nelarabine.

Science.gov (United States)

Corrigan, Damion K; Salton, Neale A; Preston, Chris; Piletsky, Sergey

2010-09-01

Cleaning verification is a scientific and economic problem for the pharmaceutical industry. A large amount of potential manufacturing time is lost to the process of cleaning verification. This involves the analysis of residues on spoiled manufacturing equipment, with high-performance liquid chromatography (HPLC) being the predominantly employed analytical technique. The aim of this study was to develop a portable cleaning verification system for nelarabine using surface enhanced Raman spectroscopy (SERS). SERS was conducted using a portable Raman spectrometer and a commercially available SERS substrate to develop a rapid and portable cleaning verification system for nelarabine. Samples of standard solutions and swab extracts were deposited onto the SERS active surfaces, allowed to dry and then subjected to spectroscopic analysis. Nelarabine was amenable to analysis by SERS and the necessary levels of sensitivity were achievable. It is possible to use this technology for a semi-quantitative limits test. Replicate precision, however, was poor due to the heterogeneous drying pattern of nelarabine on the SERS active surface. Understanding and improving the drying process in order to produce a consistent SERS signal for quantitative analysis is desirable. This work shows the potential application of SERS for cleaning verification analysis. SERS may not replace HPLC as the definitive analytical technique, but it could be used in conjunction with HPLC so that swabbing is only carried out once the portable SERS equipment has demonstrated that the manufacturing equipment is below the threshold contamination level.

Verification of DRAGON: the NXT tracking module

International Nuclear Information System (INIS)

Zkiek, A.; Marleau, G.

2007-01-01

The version of DRAGON-IST that has been verified for the calculation of the incremental cross sections associated with CANDU reactivity devices is version 3.04Bb that was released in 2001. Since then, various improvements were implemented in the code including the NXT: module that can track assemblies of clusters in 2-D and 3-D geometries. Here we will discuss the verification plan for the NXT: module of DRAGON, illustrate the verification procedure we selected and present our verification results. (author)

Dosimetric accuracy of Kodak EDR2 film for IMRT verifications.

Science.gov (United States)

Childress, Nathan L; Salehpour, Mohammad; Dong, Lei; Bloch, Charles; White, R Allen; Rosen, Isaac I

2005-02-01

Patient-specific intensity-modulated radiotherapy (IMRT) verifications require an accurate two-dimensional dosimeter that is not labor-intensive. We assessed the precision and reproducibility of film calibrations over time, measured the elemental composition of the film, measured the intermittency effect, and measured the dosimetric accuracy and reproducibility of calibrated Kodak EDR2 film for single-beam verifications in a solid water phantom and for full-plan verifications in a Rexolite phantom. Repeated measurements of the film sensitometric curve in a single experiment yielded overall uncertainties in dose of 2.1% local and 0.8% relative to 300 cGy. 547 film calibrations over an 18-month period, exposed to a range of doses from 0 to a maximum of 240 MU or 360 MU and using 6 MV or 18 MV energies, had optical density (OD) standard deviations that were 7%-15% of their average values. This indicates that daily film calibrations are essential when EDR2 film is used to obtain absolute dose results. An elemental analysis of EDR2 film revealed that it contains 60% as much silver and 20% as much bromine as Kodak XV2 film. EDR2 film also has an unusual 1.69:1 silver:halide molar ratio, compared with the XV2 film's 1.02:1 ratio, which may affect its chemical reactions. To test EDR2's intermittency effect, the OD generated by a single 300 MU exposure was compared to the ODs generated by exposing the film 1 MU, 2 MU, and 4 MU at a time to a total of 300 MU. An ion chamber recorded the relative dose of all intermittency measurements to account for machine output variations. Using small MU bursts to expose the film resulted in delivery times of 4 to 14 minutes and lowered the film's OD by approximately 2% for both 6 and 18 MV beams. This effect may result in EDR2 film underestimating absolute doses for patient verifications that require long delivery times. After using a calibration to convert EDR2 film's OD to dose values, film measurements agreed within 2% relative

Production of plastic scintillation survey meter for clearance verification measurement

International Nuclear Information System (INIS)

Tachibana, Mitsuo; Shiraishi, Kunio; Ishigami, Tsutomu; Tomii, Hiroyuki

2008-03-01

In the Nuclear Science Research Institute, the decommissioning of various nuclear facilities is carried out according to the plan for meeting the midterm goal of the Japan Atomic Energy Agency (JAEA). An increase in the clearance verification measurement of concrete on buildings and the radiation measurement for releasing controlled areas will be expected along with the dismantlement of nuclear facilities in the future. The radiation measurement for releasing controlled areas has been carried out in small-scale nuclear facilities including the JPDR (Japan Power Demonstration Reactor). However, the radiation measurement with an existing measuring device was difficult in effects of radiation from radioactive materials that remains in buried piping. On the other hand, there is no experience that the clearance verification measurement is executed in the JAEA. The generation of a large amount of clearance object will be expected along with the decommissioning of the nuclear facilities in the future. The plastic scintillation survey meter (hereafter, 'PL measuring device') was produced to apply to the clearance verification measurement and the radiation measurement for releasing controlled areas. The basic characteristic test and the actual test were confirmed using the PL measuring device. As a result of these tests, it was found that the evaluation value of radioactivity with the PL measuring device was accuracy equal with the existing measuring device. The PL measuring device has feature of the existing measuring device with a light weight and easy operability. The PL measuring device can correct the gamma ray too. The PL measuring device is effective to the clearance verification measurement of concrete on buildings and the radiation measurement for releasing controlled areas. (author)

Writer Identification and Verification from Intra-variable Individual Handwriting

OpenAIRE

Adak, Chandranath; Chaudhuri, Bidyut B.; Blumenstein, Michael

2017-01-01

The handwriting of an individual may vary excessively with many factors such as mood, time, space, writing speed, writing medium, utensils etc. Therefore, it becomes more challenging to perform automated writer verification/ identification on a particular set of handwritten patterns (e.g. speedy handwriting) of a person, especially when the system is trained using a different set of writing patterns (e.g. normal/medium speed) of that same person. However, it would be interesting to experiment...

Technical challenges for dismantlement verification

International Nuclear Information System (INIS)

Olinger, C.T.; Stanbro, W.D.; Johnston, R.G.; Nakhleh, C.W.; Dreicer, J.S.

1997-01-01

In preparation for future nuclear arms reduction treaties, including any potential successor treaties to START I and II, the authors have been examining possible methods for bilateral warhead dismantlement verification. Warhead dismantlement verification raises significant challenges in the political, legal, and technical arenas. This discussion will focus on the technical issues raised by warhead arms controls. Technical complications arise from several sources. These will be discussed under the headings of warhead authentication, chain-of-custody, dismantlement verification, non-nuclear component tracking, component monitoring, and irreversibility. The authors will discuss possible technical options to address these challenges as applied to a generic dismantlement and disposition process, in the process identifying limitations and vulnerabilities. They expect that these considerations will play a large role in any future arms reduction effort and, therefore, should be addressed in a timely fashion

Dosimetry investigation of MOSFET for clinical IMRT dose verification.

Science.gov (United States)

Deshpande, Sudesh; Kumar, Rajesh; Ghadi, Yogesh; Neharu, R M; Kannan, V

2013-06-01

In IMRT, patient-specific dose verification is followed regularly at each centre. Simple and efficient dosimetry techniques play a very important role in routine clinical dosimetry QA. The MOSFET dosimeter offers several advantages over the conventional dosimeters such as its small detector size, immediate readout, immediate reuse, multiple point dose measurements. To use the MOSFET as routine clinical dosimetry system for pre-treatment dose verification in IMRT, a comprehensive set of experiments has been conducted, to investigate its linearity, reproducibility, dose rate effect and angular dependence for 6 MV x-ray beam. The MOSFETs shows a linear response with linearity coefficient of 0.992 for a dose range of 35 cGy to 427 cGy. The reproducibility of the MOSFET was measured by irradiating the MOSFET for ten consecutive irradiations in the dose range of 35 cGy to 427 cGy. The measured reproducibility of MOSFET was found to be within 4% up to 70 cGy and within 1.4% above 70 cGy. The dose rate effect on the MOSFET was investigated in the dose rate range 100 MU/min to 600 MU/min. The response of the MOSFET varies from -1.7% to 2.1%. The angular responses of the MOSFETs were measured at 10 degrees intervals from 90 to 270 degrees in an anticlockwise direction and normalized at gantry angle zero and it was found to be in the range of 0.98 ± 0.014 to 1.01 ± 0.014. The MOSFETs were calibrated in a phantom which was later used for IMRT verification. The measured calibration coefficients were found to be 1 mV/cGy and 2.995 mV/cGy in standard and high sensitivity mode respectively. The MOSFETs were used for pre-treatment dose verification in IMRT. Nine dosimeters were used for each patient to measure the dose in different plane. The average variation between calculated and measured dose at any location was within 3%. Dose verification using MOSFET and IMRT phantom was found to quick and efficient and well suited for a busy radiotherapy

Safety Verification for Probabilistic Hybrid Systems

DEFF Research Database (Denmark)

Zhang, Lijun; She, Zhikun; Ratschan, Stefan

2010-01-01

The interplay of random phenomena and continuous real-time control deserves increased attention for instance in wireless sensing and control applications. Safety verification for such systems thus needs to consider probabilistic variations of systems with hybrid dynamics. In safety verification o...... on a number of case studies, tackled using a prototypical implementation....

SSN Verification Service

Data.gov (United States)

Social Security Administration — The SSN Verification Service is used by Java applications to execute the GUVERF02 service using the WebSphere/CICS Interface. It accepts several input data fields...

Three-dimensional thermal hydraulic best estimate code BAGIRA: new results of verification

International Nuclear Information System (INIS)

Peter Kohut; Sergey D Kalinichenko; Alexander E Kroshilin; Vladimir E Kroshilin; Alexander V Smirnov

2005-01-01

Full text of publication follows: BAGIRA is a three-dimensional inhomogeneous two-velocity two-temperature thermal hydraulic code of best estimate, elaborated in VNIIAES for modeling two-phase flows in the primary circuit and steam generators of VVER-type nuclear reactors under various accident, transient or normal operation conditions. In this talk we present verification results of the BAGIRA code, obtained on the basis of different experiments performed on special and integral thermohydraulic experimental facilities as well as on real NPPs. Special attention is paid to the verification of three-dimensional flow models. Besides that we expose new results of the code benchmark analysis made on the basis of two recent LOCA-type experiments - 'Leak 2 x 25% from the hot leg double-side rupture' and 'Leak 3% from the cold leg' - performed on the PSB-VVER integral test facility (Electrogorsk Research and Engineering Center, Electrogorsk, Russia) - the most up-to-date Russian large-scale four-loop unit which has been designed for modelling the primary circuit of VVER-1000 type reactors. (authors)

The concept verification testing of materials science payloads

Science.gov (United States)

Griner, C. S.; Johnston, M. H.; Whitaker, A.

1976-01-01

The concept Verification Testing (CVT) project at the Marshall Space Flight Center, Alabama, is a developmental activity that supports Shuttle Payload Projects such as Spacelab. It provides an operational 1-g environment for testing NASA and other agency experiment and support systems concepts that may be used in shuttle. A dedicated Materials Science Payload was tested in the General Purpose Laboratory to assess the requirements of a space processing payload on a Spacelab type facility. Physical and functional integration of the experiments into the facility was studied, and the impact of the experiments on the facility (and vice versa) was evaluated. A follow-up test designated CVT Test IVA was also held. The purpose of this test was to repeat Test IV experiments with a crew composed of selected and trained scientists. These personnel were not required to have prior knowledge of the materials science disciplines, but were required to have a basic knowledge of science and the scientific method.

Enhanced Verification Test Suite for Physics Simulation Codes

Energy Technology Data Exchange (ETDEWEB)

Kamm, J R; Brock, J S; Brandon, S T; Cotrell, D L; Johnson, B; Knupp, P; Rider, W; Trucano, T; Weirs, V G

2008-10-10

This document discusses problems with which to augment, in quantity and in quality, the existing tri-laboratory suite of verification problems used by Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratories (SNL). The purpose of verification analysis is demonstrate whether the numerical results of the discretization algorithms in physics and engineering simulation codes provide correct solutions of the corresponding continuum equations. The key points of this document are: (1) Verification deals with mathematical correctness of the numerical algorithms in a code, while validation deals with physical correctness of a simulation in a regime of interest. This document is about verification. (2) The current seven-problem Tri-Laboratory Verification Test Suite, which has been used for approximately five years at the DOE WP laboratories, is limited. (3) Both the methodology for and technology used in verification analysis have evolved and been improved since the original test suite was proposed. (4) The proposed test problems are in three basic areas: (a) Hydrodynamics; (b) Transport processes; and (c) Dynamic strength-of-materials. (5) For several of the proposed problems we provide a 'strong sense verification benchmark', consisting of (i) a clear mathematical statement of the problem with sufficient information to run a computer simulation, (ii) an explanation of how the code result and benchmark solution are to be evaluated, and (iii) a description of the acceptance criterion for simulation code results. (6) It is proposed that the set of verification test problems with which any particular code be evaluated include some of the problems described in this document. Analysis of the proposed verification test problems constitutes part of a necessary--but not sufficient--step that builds confidence in physics and engineering simulation codes. More complicated test cases, including physics models of

Advancing Disarmament Verification Tools: A Task for Europe?

International Nuclear Information System (INIS)

Göttsche, Malte; Kütt, Moritz; Neuneck, Götz; Niemeyer, Irmgard

2015-01-01

A number of scientific-technical activities have been carried out to establish more robust and irreversible disarmament verification schemes. Regardless of the actual path towards deeper reductions in nuclear arsenals or their total elimination in the future, disarmament verification will require new verification procedures and techniques. This paper discusses the information that would be required as a basis for building confidence in disarmament, how it could be principally verified and the role Europe could play. Various ongoing activities are presented that could be brought together to produce a more intensified research and development environment in Europe. The paper argues that if ‘effective multilateralism’ is the main goal of the European Union’s (EU) disarmament policy, EU efforts should be combined and strengthened to create a coordinated multilateral disarmament verification capacity in the EU and other European countries. The paper concludes with several recommendations that would have a significant impact on future developments. Among other things, the paper proposes a one-year review process that should include all relevant European actors. In the long run, an EU Centre for Disarmament Verification could be envisaged to optimize verification needs, technologies and procedures.

The verification of DRAGON: progress and lessons learned

International Nuclear Information System (INIS)

Marleau, G.

2002-01-01

The general requirements for the verification of the legacy code DRAGON are somewhat different from those used for new codes. For example, the absence of a design manual for DRAGON makes it difficult to confirm that the each part of the code performs as required since these requirements are not explicitly spelled out for most of the DRAGON modules. In fact, this conformance of the code can only be assessed, in most cases, by making sure that the contents of the DRAGON data structures, which correspond to the output generated by a module of the code, contains the adequate information. It is also possible in some cases to use the self-verification options in DRAGON to perform additional verification or to evaluate, using an independent software, the performance of specific functions in the code. Here, we will describe the global verification process that was considered in order to bring DRAGON to an industry standard tool-set (IST) status. We will also discuss some of the lessons we learned in performing this verification and present some of the modification to DRAGON that were implemented as a consequence of this verification. (author)

Using Economic Incentives to Reduce Electricity Consumption: A field Experiment in Matsuyama, Japan

Directory of Open Access Journals (Sweden)

Kenichi Mizobuchi

2012-01-01

Full Text Available This study examines the effectiveness of economic incentives in promoting electricity-conservation behavior among Japanese households. Fifty-three Japanese households participated in a field experiment and were offered monetary rewards depending on their rate of reduction in electricity consumption. To avoid bias in sample selection, which is typically present in previous studies, we adopted a request-based approach for recruiting participants. Results showed that only 34% of the participants succeeded in reducing their electricity consumption, and the average reduction rate was –4.8%. Econometric analysis confirmed that monetary rewards had a positive influence on the electricity conservation behavior, especially of family members who typically stay at home on weekdays. Responses to the questionnaires administered before and after the experiment suggest that participants may have underestimated the marginal costs of the electricity conservation behavior. The efficacy of economic incentives, established in our study, offers a potential measure for encouraging electricity-conservation behavior among Japanese households.

Simulation Environment Based on the Universal Verification Methodology

CERN Document Server

AUTHOR|(SzGeCERN)697338

2017-01-01

Universal Verification Methodology (UVM) is a standardized approach of verifying integrated circuit designs, targeting a Coverage-Driven Verification (CDV). It combines automatic test generation, self-checking testbenches, and coverage metrics to indicate progress in the design verification. The flow of the CDV differs from the traditional directed-testing approach. With the CDV, a testbench developer, by setting the verification goals, starts with an structured plan. Those goals are targeted further by a developed testbench, which generates legal stimuli and sends them to a device under test (DUT). The progress is measured by coverage monitors added to the simulation environment. In this way, the non-exercised functionality can be identified. Moreover, the additional scoreboards indicate undesired DUT behaviour. Such verification environments were developed for three recent ASIC and FPGA projects which have successfully implemented the new work-flow: (1) the CLICpix2 65 nm CMOS hybrid pixel readout ASIC desi...

Hierarchical Representation Learning for Kinship Verification.

Science.gov (United States)

Kohli, Naman; Vatsa, Mayank; Singh, Richa; Noore, Afzel; Majumdar, Angshul

2017-01-01

Kinship verification has a number of applications such as organizing large collections of images and recognizing resemblances among humans. In this paper, first, a human study is conducted to understand the capabilities of human mind and to identify the discriminatory areas of a face that facilitate kinship-cues. The visual stimuli presented to the participants determine their ability to recognize kin relationship using the whole face as well as specific facial regions. The effect of participant gender and age and kin-relation pair of the stimulus is analyzed using quantitative measures such as accuracy, discriminability index d' , and perceptual information entropy. Utilizing the information obtained from the human study, a hierarchical kinship verification via representation learning (KVRL) framework is utilized to learn the representation of different face regions in an unsupervised manner. We propose a novel approach for feature representation termed as filtered contractive deep belief networks (fcDBN). The proposed feature representation encodes relational information present in images using filters and contractive regularization penalty. A compact representation of facial images of kin is extracted as an output from the learned model and a multi-layer neural network is utilized to verify the kin accurately. A new WVU kinship database is created, which consists of multiple images per subject to facilitate kinship verification. The results show that the proposed deep learning framework (KVRL-fcDBN) yields the state-of-the-art kinship verification accuracy on the WVU kinship database and on four existing benchmark data sets. Furthermore, kinship information is used as a soft biometric modality to boost the performance of face verification via product of likelihood ratio and support vector machine based approaches. Using the proposed KVRL-fcDBN framework, an improvement of over 20% is observed in the performance of face verification.

The US National Resources Defense Council/Soviet Academy of Sciences Nuclear Test Ban Verification Project

International Nuclear Information System (INIS)

Cochran, T.B.

1989-01-01

The first week in September 1987 was an extraordinary one for arms control verification. As part of the co-operative Test Ban Verification Project of the Natural Resources Defense Council (NRDC) and the Soviet Academy of Sciences, fourteen American scientists from the Scripps Institution of Oceanography (at the University of California- San Diego), University of Nevada-Reno and the University of Colorado went to the region of the Soviet's principal nuclear test site near Semipalatinsk. Together with their Soviet counterparts from the Institute of Physics of the Earth (IPE) in Moscow, they fired off three large chemical explosions. The purpose of these explosions was to demonstrate the sensitivity of the three seismic stations surrounding the test site, to study the efficiency with which high-frequency seismic waves propagate in the region, and to study differences between chemical explosions, nuclear explosions and earthquakes in order more firmly to establish procedures for verification of a nuclear test ban. This paper presents a review of the results of these experiments, an update on the status of the joint project, and a review of the significance of high frequency seismic data to test ban verification

Self-verification motives at the collective level of self-definition.

Science.gov (United States)

Chen, Serena; Chen, Karen Y; Shaw, Lindsay

2004-01-01

Three studies examined self-verification motives in relation to collective aspects of the self. Several moderators of collective self-verification were also examined--namely, the certainty with which collective self-views are held, the nature of one's ties to a source of self-verification, the salience of the collective self, and the importance of group identification. Evidence for collective self-verification emerged across all studies, particularly when collective self-views were held with high certainty (Studies 1 and 2), perceivers were somehow tied to the source of self-verification (Study 1), the collective self was salient (Study 2), and group identification was important (Study 3). To the authors' knowledge, these studies are the first to examine self-verification at the collective level of self-definition. The parallel and distinct ways in which self-verification processes may operate at different levels of self-definition are discussed.

24 CFR 5.512 - Verification of eligible immigration status.

Science.gov (United States)

2010-04-01

... immigration status. 5.512 Section 5.512 Housing and Urban Development Office of the Secretary, Department of... Noncitizens § 5.512 Verification of eligible immigration status. (a) General. Except as described in paragraph...) Primary verification—(1) Automated verification system. Primary verification of the immigration status of...

Verification of RADTRAN

International Nuclear Information System (INIS)

Kanipe, F.L.; Neuhauser, K.S.

1995-01-01

This document presents details of the verification process of the RADTRAN computer code which was established for the calculation of risk estimates for radioactive materials transportation by highway, rail, air, and waterborne modes

Wind turbine power performance verification in complex terrain and wind farms

DEFF Research Database (Denmark)

Friis Pedersen, Troels; Gjerding, S.; Enevoldsen, P.

2002-01-01

is a power performance verification procedure for individual wind turbines. The third is a power performance measurement procedure of whole wind farms, and the fourth is a power performance measurement procedurefor non-grid (small) wind turbines. This report presents work that was made to support the basis......The IEC/EN 61400-12 Ed 1 standard for wind turbine power performance testing is being revised. The standard will be divided into four documents. The first one of these is more or less a revision of the existing document on power performance measurementson individual wind turbines. The second one...... then been investigated in more detail. The work has given rise to a range of conclusionsand recommendations regarding: guaranties on power curves in complex terrain; investors and bankers experience with verification of power curves; power performance in relation to regional correction curves for Denmark...

Verification of criticality safety in on-site spent fuel storage systems

International Nuclear Information System (INIS)

Rasmussen, R.W.

1989-01-01

On February 15, 1984, Duke Power Company received approval for a two-region, burnup credit, spent fuel storage rack design at both Units 1 and 2 of the McGuire Nuclear Station. Duke also hopes to obtain approval by January of 1990 for a dry spent fuel storage system at the Oconee Nuclear Station, which will incorporate the use of burnup credit in the criticality analysis governing the design of the individual storage units. While experiences in burnup verification for criticality safety for their dry storage system at Oconee are in the future, the methods proposed for burnup verification will be similar to those currently used at the McGuire Nuclear Station in the two-region storage racks installed in both pools. In conclusion, the primary benefit of the McGuire rerack effort has obviously been the amount of storage expansion it provided. A total increase of about 2,000 storage cells was realized, 1,000 of which were the result of pursuing the two-region rather than the conventional poison rack design. Less impacting, but equally as important, however, has been the experience gained during the planning, installation, and operation of these storage racks. This experience should prove useful for future rerack efforts likely to occur at Duke's Catawba Nuclear Station as well as for the current dry storage effort underway for the Oconee Nuclear Station

Verification and Validation of Carbon-Fiber Laminate Low Velocity Impact Simulations.

Energy Technology Data Exchange (ETDEWEB)

English, Shawn Allen; Nelson, Stacy Michelle; Briggs, Timothy; Brown, Arthur A.

2014-10-01

Presented is a model verification and validation effort using low - velocity impact (LVI) of carbon fiber reinforced polymer laminate experiments. A flat cylindrical indenter impacts the laminate with enough energy to produce delamination, matrix cracks and fiber breaks. Included in the experimental efforts are ultrasonic scans of the damage for qualitative validation of the models. However, the primary quantitative metrics of validation are the force time history measured through the instrumented indenter and initial and final velocities. The simulations, whi ch are run on Sandia's Sierra finite element codes , consist of all physics and material parameters of importance as determined by a sensitivity analysis conducted on the LVI simulation. A novel orthotropic damage and failure constitutive model that is cap able of predicting progressive composite damage and failure is described in detail and material properties are measured, estimated from micromechanics or optimized through calibration. A thorough verification and calibration to the accompanying experiment s are presented. Specia l emphasis is given to the four - point bend experiment. For all simulations of interest, the mesh and material behavior is verified through extensive convergence studies. An ensemble of simulations incorporating model parameter unc ertainties is used to predict a response distribution which is then compared to experimental output. The result is a quantifiable confidence in material characterization and model physics when simulating this phenomenon in structures of interest.

The Economic Domino Effect: A Phenomenological Study Exploring Community College Faculty's Lived Experiences during Financial Hard Times in Higher Education

Science.gov (United States)

Taylor, Tridai A.

2014-01-01

This qualitative study explored the lived experiences of eight full-time community college faculty members who taught during the economic crisis of 2008. The study was guided by the central research question, "How do community college faculty members describe their lived experiences regarding the recent economic crisis of 2008 and its impact…

CASL Verification and Validation Plan

Energy Technology Data Exchange (ETDEWEB)

Mousseau, Vincent Andrew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dinh, Nam [North Carolina State Univ., Raleigh, NC (United States)

2016-06-30

This report documents the Consortium for Advanced Simulation of LWRs (CASL) verification and validation plan. The document builds upon input from CASL subject matter experts, most notably the CASL Challenge Problem Product Integrators, CASL Focus Area leaders, and CASL code development and assessment teams. This document will be a living document that will track progress on CASL to do verification and validation for both the CASL codes (including MPACT, CTF, BISON, MAMBA) and for the CASL challenge problems (CIPS, PCI, DNB). The CASL codes and the CASL challenge problems are at differing levels of maturity with respect to validation and verification. The gap analysis will summarize additional work that needs to be done. Additional VVUQ work will be done as resources permit. This report is prepared for the Department of Energy’s (DOE’s) CASL program in support of milestone CASL.P13.02.

The monitoring and verification of nuclear weapons

International Nuclear Information System (INIS)

Garwin, Richard L.

2014-01-01

This paper partially reviews and updates the potential for monitoring and verification of nuclear weapons, including verification of their destruction. Cooperative monitoring with templates of the gamma-ray spectrum are an important tool, dependent on the use of information barriers

DarcyTools, Version 2.1. Verification and validation

International Nuclear Information System (INIS)

Svensson, Urban

2004-03-01

DarcyTools is a computer code for simulation of flow and transport in porous and/or fractured media. The fractured media in mind is a fractured rock and the porous media the soil cover on the top of the rock; it is hence groundwater flows, which is the class of flows in mind. A number of novel methods and features form the present version of DarcyTools. In the verification studies, these methods are evaluated by comparisons with analytical solutions for idealized situations. The five verification groups, thus reflect the main areas of recent developments. The present report will focus on the Verification and Validation of DarcyTools. Two accompanying reports cover other aspects: - Concepts, Methods, Equations and Demo Simulations. - User's Guide. The objective of this report is to compile all verification and validation studies that have been carried out so far. After some brief introductory sections, all cases will be reported in Appendix A (verification cases) and Appendix B (validation cases)

Verification and quality control of routine hematology analyzers.

Science.gov (United States)

Vis, J Y; Huisman, A

2016-05-01

Verification of hematology analyzers (automated blood cell counters) is mandatory before new hematology analyzers may be used in routine clinical care. The verification process consists of several items which comprise among others: precision, accuracy, comparability, carryover, background and linearity throughout the expected range of results. Yet, which standard should be met or which verification limit be used is at the discretion of the laboratory specialist. This paper offers practical guidance on verification and quality control of automated hematology analyzers and provides an expert opinion on the performance standard that should be met by the contemporary generation of hematology analyzers. Therefore (i) the state-of-the-art performance of hematology analyzers for complete blood count parameters is summarized, (ii) considerations, challenges, and pitfalls concerning the development of a verification plan are discussed, (iii) guidance is given regarding the establishment of reference intervals, and (iv) different methods on quality control of hematology analyzers are reviewed. © 2016 John Wiley & Sons Ltd.

DarcyTools, Version 2.1. Verification and validation

Energy Technology Data Exchange (ETDEWEB)

Svensson, Urban [Computer-aided Fluid Engineering AB, Norrkoeping (Sweden)

2004-03-01

DarcyTools is a computer code for simulation of flow and transport in porous and/or fractured media. The fractured media in mind is a fractured rock and the porous media the soil cover on the top of the rock; it is hence groundwater flows, which is the class of flows in mind. A number of novel methods and features form the present version of DarcyTools. In the verification studies, these methods are evaluated by comparisons with analytical solutions for idealized situations. The five verification groups, thus reflect the main areas of recent developments. The present report will focus on the Verification and Validation of DarcyTools. Two accompanying reports cover other aspects: - Concepts, Methods, Equations and Demo Simulations. - User's Guide. The objective of this report is to compile all verification and validation studies that have been carried out so far. After some brief introductory sections, all cases will be reported in Appendix A (verification cases) and Appendix B (validation cases)

Verification-Based Interval-Passing Algorithm for Compressed Sensing

OpenAIRE

Wu, Xiaofu; Yang, Zhen

2013-01-01

We propose a verification-based Interval-Passing (IP) algorithm for iteratively reconstruction of nonnegative sparse signals using parity check matrices of low-density parity check (LDPC) codes as measurement matrices. The proposed algorithm can be considered as an improved IP algorithm by further incorporation of the mechanism of verification algorithm. It is proved that the proposed algorithm performs always better than either the IP algorithm or the verification algorithm. Simulation resul...

Multi-canister overpack project - verification and validation, MCNP 4A

International Nuclear Information System (INIS)

Goldmann, L.H.

1997-01-01

This supporting document contains the software verification and validation (V and V) package used for Phase 2 design of the Spent Nuclear Fuel Multi-Canister Overpack. V and V packages for both ANSYS and MCNP are included. Description of Verification Run(s): This software requires that it be compiled specifically for the machine it is to be used on. Therefore to facilitate ease in the verification process the software automatically runs 25 sample problems to ensure proper installation and compilation. Once the runs are completed the software checks for verification by performing a file comparison on the new output file and the old output file. Any differences between any of the files will cause a verification error. Due to the manner in which the verification is completed a verification error does not necessarily indicate a problem. This indicates that a closer look at the output files is needed to determine the cause of the error

The verification of neutron activation analysis support system (cooperative research)

Energy Technology Data Exchange (ETDEWEB)

Sasajima, Fumio; Ichimura, Shigeju; Ohtomo, Akitoshi; Takayanagi, Masaji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Sawahata, Hiroyuki; Ito, Yasuo [Tokyo Univ. (Japan). Research Center for Nuclear Science and Technology; Onizawa, Kouji [Radiation Application Development Association, Tokai, Ibaraki (Japan)

2000-12-01

Neutron activation analysis support system is the system in which even the user who has not much experience in the neutron activation analysis can conveniently and accurately carry out the multi-element analysis of the sample. In this verification test, subjects such functions, usability, precision and accuracy of the analysis and etc. of the neutron activation analysis support system were confirmed. As a method of the verification test, it was carried out using irradiation device, measuring device, automatic sample changer and analyzer equipped in the JRR-3M PN-3 facility, and analysis software KAYZERO/SOLCOI based on the k{sub 0} method. With these equipments, calibration of the germanium detector, measurement of the parameter of the irradiation field and analysis of three kinds of environmental standard sample were carried out. The k{sub 0} method adopted in this system is primarily utilized in Europe recently, and it is the analysis method, which can conveniently and accurately carried out the multi-element analysis of the sample without requiring individual comparison standard sample. By this system, total 28 elements were determined quantitatively, and 16 elements with the value guaranteed as analytical data of the NIST (National Institute of Standards and Technology) environment standard sample were analyzed in the accuracy within 15%. This report describes content and verification result of neutron activation support system. (author)

EOPs at NPP Temelin: Analytical support for EOPs verification

International Nuclear Information System (INIS)

Bica, M.

1999-01-01

The process of implementation of symptom-based emergency operating procedures (EOPs) started at the NPP Temelin in 1993. The process has the following phases: development of symptom-based EOPs; EOPs verification; EOPs validation; operating personnel training; EOPs control and experience feedback. The development of Temelin specific EOPs was based on technology and know-how transfer using the Emergency Response Guidelines Methodology developed by the Westinghouse Owner Group. In this lecture the implementation of symptom-based EOPs in the the NPP Temelin is described

Key Nuclear Verification Priorities: Safeguards and Beyond

International Nuclear Information System (INIS)

Carlson, J.

2010-01-01

In addressing nuclear verification priorities, we should look beyond the current safeguards system. Non-proliferation, which the safeguards system underpins, is not an end in itself, but an essential condition for achieving and maintaining nuclear disarmament. Effective safeguards are essential for advancing disarmament, and safeguards issues, approaches and techniques are directly relevant to the development of future verification missions. The extent to which safeguards challenges are successfully addressed - or otherwise - will impact not only on confidence in the safeguards system, but on the effectiveness of, and confidence in, disarmament verification. To identify the key nuclear verification priorities, we need to consider the objectives of verification, and the challenges to achieving these. The strategic objective of IAEA safeguards might be expressed as: To support the global nuclear non-proliferation regime by: - Providing credible assurance that states are honouring their safeguards commitments - thereby removing a potential motivation to proliferate; and - Early detection of misuse of nuclear material and technology - thereby deterring proliferation by the risk of early detection, enabling timely intervention by the international community. Or to summarise - confidence-building, detection capability, and deterrence. These will also be essential objectives for future verification missions. The challenges to achieving these involve a mix of political, technical and institutional dimensions. Confidence is largely a political matter, reflecting the qualitative judgment of governments. Clearly assessments of detection capability and deterrence have a major impact on confidence. Detection capability is largely thought of as 'technical', but also involves issues of legal authority, as well as institutional issues. Deterrence has both political and institutional aspects - including judgments on risk of detection and risk of enforcement action being taken. The

Key Nuclear Verification Priorities - Safeguards and Beyond

International Nuclear Information System (INIS)

Carlson, J.

2010-01-01

In addressing nuclear verification priorities, we should look beyond the current safeguards system. Non-proliferation, which the safeguards system underpins, is not an end in itself, but an essential condition for achieving and maintaining nuclear disarmament. Effective safeguards are essential for advancing disarmament, and safeguards issues, approaches and techniques are directly relevant to the development of future verification missions. The extent to which safeguards challenges are successfully addressed - or otherwise - will impact not only on confidence in the safeguards system, but on the effectiveness of, and confidence in, disarmament verification. To identify the key nuclear verification priorities, we need to consider the objectives of verification, and the challenges to achieving these. The strategic objective of IAEA safeguards might be expressed as: To support the global nuclear non-proliferation regime by: - Providing credible assurance that states are honouring their safeguards commitments - thereby removing a potential motivation to proliferate; and - Early detection of misuse of nuclear material and technology - thereby deterring proliferation by the risk of early detection, enabling timely intervention by the international community. Or to summarise - confidence-building, detection capability, and deterrence. These will also be essential objectives for future verification missions. The challenges to achieving these involve a mix of political, technical and institutional dimensions. Confidence is largely a political matter, reflecting the qualitative judgment of governments. Clearly assessments of detection capability and deterrence have a major impact on confidence. Detection capability is largely thought of as 'technical', but also involves issues of legal authority, as well as institutional issues. Deterrence has both political and institutional aspects - including judgments on risk of detection and risk of enforcement action being taken. The

On the organisation of program verification competitions

NARCIS (Netherlands)

Huisman, Marieke; Klebanov, Vladimir; Monahan, Rosemary; Klebanov, Vladimir; Beckert, Bernhard; Biere, Armin; Sutcliffe, Geoff

In this paper, we discuss the challenges that have to be addressed when organising program verification competitions. Our focus is on competitions for verification systems where the participants both formalise an informally stated requirement and (typically) provide some guidance for the tool to

HTGR analytical methods and design verification

International Nuclear Information System (INIS)

Neylan, A.J.; Northup, T.E.

1982-05-01

Analytical methods for the high-temperature gas-cooled reactor (HTGR) include development, update, verification, documentation, and maintenance of all computer codes for HTGR design and analysis. This paper presents selected nuclear, structural mechanics, seismic, and systems analytical methods related to the HTGR core. This paper also reviews design verification tests in the reactor core, reactor internals, steam generator, and thermal barrier

IMRT plan verification in radiotherapy

International Nuclear Information System (INIS)

Vlk, P.

2006-01-01

This article describes the procedure for verification of IMRT (Intensity modulated radiation therapy) plan, which is used in the Oncological Institute of St. Elisabeth in Bratislava. It contains basic description of IMRT technology and developing a deployment plan for IMRT planning system CORVUS 6.0, the device Mimic (Multilammelar intensity modulated collimator) and the overall process of verifying the schedule created. The aim of verification is particularly good control of the functions of MIMIC and evaluate the overall reliability of IMRT planning. (author)

Automatic Verification of Timing Constraints for Safety Critical Space Systems

Science.gov (United States)

Fernandez, Javier; Parra, Pablo; Sanchez Prieto, Sebastian; Polo, Oscar; Bernat, Guillem

2015-09-01

In this paper is presented an automatic process of verification. We focus in the verification of scheduling analysis parameter. This proposal is part of process based on Model Driven Engineering to automate a Verification and Validation process of the software on board of satellites. This process is implemented in a software control unit of the energy particle detector which is payload of Solar Orbiter mission. From the design model is generated a scheduling analysis model and its verification model. The verification as defined as constraints in way of Finite Timed Automatas. When the system is deployed on target the verification evidence is extracted as instrumented points. The constraints are fed with the evidence, if any of the constraints is not satisfied for the on target evidence the scheduling analysis is not valid.

Verification and validation process for the safety software in KNICS

International Nuclear Information System (INIS)

Kwon, Kee-Choon; Lee, Jang-Soo; Kim, Jang-Yeol

2004-01-01

This paper describes the Verification and Validation (V and V ) process for safety software of Programmable Logic Controller (PLC), Digital Reactor Protection System (DRPS), and Engineered Safety Feature-Component Control System (ESF-CCS) that are being developed in Korea Nuclear Instrumentation and Control System (KNICS) projects. Specifically, it presents DRPS V and V experience according to the software development life cycle. The main activities of DRPS V and V process are preparation of software planning documentation, verification of Software Requirement Specification (SRS), Software Design Specification (SDS) and codes, and testing of the integrated software and the integrated system. In addition, they include software safety analysis and software configuration management. SRS V and V of DRPS are technical evaluation, licensing suitability evaluation, inspection and traceability analysis, formal verification, preparing integrated system test plan, software safety analysis, and software configuration management. Also, SDS V and V of RPS are technical evaluation, licensing suitability evaluation, inspection and traceability analysis, formal verification, preparing integrated software test plan, software safety analysis, and software configuration management. The code V and V of DRPS are traceability analysis, source code inspection, test case and test procedure generation, software safety analysis, and software configuration management. Testing is the major V and V activity of software integration and system integration phase. Software safety analysis at SRS phase uses Hazard Operability (HAZOP) method, at SDS phase it uses HAZOP and Fault Tree Analysis (FTA), and at implementation phase it uses FTA. Finally, software configuration management is performed using Nu-SCM (Nuclear Software Configuration Management) tool developed by KNICS project. Through these activities, we believe we can achieve the functionality, performance, reliability and safety that are V

A framework for nuclear agreement and verification

International Nuclear Information System (INIS)

Ali, A.

1991-01-01

This chapter assesses the prospects for a nuclear agreement between India and Pakistan. The chapter opens with a review of past and present political environments of the two countries. The discussion proceeds to describe the linkage of global arms control agreements, prospects for verification of a Comprehensive Test Ban Treaty, the role of nuclear power in any agreements, the intrusiveness of verification, and possible post-proliferation agreements. Various monitoring and verification technologies are described (mainly satellite oriented). The chapter concludes with an analysis of the likelihood of persuading India and Pakistan to agree to a nonproliferation arrangement

Verification of Many-Qubit States

Directory of Open Access Journals (Sweden)

Yuki Takeuchi

2018-06-01

Full Text Available Verification is a task to check whether a given quantum state is close to an ideal state or not. In this paper, we show that a variety of many-qubit quantum states can be verified with only sequential single-qubit measurements of Pauli operators. First, we introduce a protocol for verifying ground states of Hamiltonians. We next explain how to verify quantum states generated by a certain class of quantum circuits. We finally propose an adaptive test of stabilizers that enables the verification of all polynomial-time-generated hypergraph states, which include output states of the Bremner-Montanaro-Shepherd-type instantaneous quantum polynomial time (IQP circuits. Importantly, we do not make any assumption that the identically and independently distributed copies of the same states are given: Our protocols work even if some highly complicated entanglement is created among copies in any artificial way. As applications, we consider the verification of the quantum computational supremacy demonstration with IQP models, and verifiable blind quantum computing.

Formal Verification -26 ...

Indian Academy of Sciences (India)

by testing of the components and successful testing leads to the software being ... Formal verification is based on formal methods which are mathematically based ..... scenario under which a similar error could occur. There are various other ...

ECG based biometrics verification system using LabVIEW

Directory of Open Access Journals (Sweden)

Sunil Kumar Singla

2010-07-01

Full Text Available Biometric based authentication systems provide solutions to the problems in high security which remain with conventionalsecurity systems. In a biometric verification system, human’s biological parameters (such as voice, finger print,palm print or hand geometry, face, iris etc. are used to verify the authenticity of a person. These parameters are good to beused as biometric parameters but do not provide the guarantee that the person is present and alive. As voice can be copied,finger print can be picked from glass on synthetic skin and in face recognition system due to genetic factors identical twinsor father-son may have the same facial appearance. ECG does not have these problems. It can not be recorded without theknowledge of the person and ECG of every person is unique even identical twins have different ECG. In this paper an ECGbasedbiometrics verification system which was developed using Laboratory Virtual Instruments Engineering Workbench(LabVIEW version 7.1 is discussed. Experiments were conducted on the database stored in the laboratory of 20 individualshaving 10 samples each and the results revealed a false rejection rate (FRR of 3% and false acceptance rate (FAR of 3.21%.

Verification of wet blasting decontamination technology

International Nuclear Information System (INIS)

Matsubara, Sachito; Murayama, Kazunari; Yoshida, Hirohisa; Igei, Shigemitsu; Izumida, Tatsuo

2013-01-01

Macoho Co., Ltd. participated in the projects of 'Decontamination Verification Test FY 2011 by the Ministry of the Environment' and 'Decontamination Verification Test FY 2011 by the Cabinet Office.' And we tested verification to use a wet blasting technology for decontamination of rubble and roads contaminated by the accident of Fukushima Daiichi Nuclear Power Plant of the Tokyo Electric Power Company. As a results of the verification test, the wet blasting decontamination technology showed that a decontamination rate became 60-80% for concrete paving, interlocking, dense-grated asphalt pavement when applied to the decontamination of the road. When it was applied to rubble decontamination, a decontamination rate was 50-60% for gravel and approximately 90% for concrete and wood. It was thought that Cs-134 and Cs-137 attached to the fine sludge scraped off from a decontamination object and the sludge was found to be separated from abrasives by wet cyclene classification: the activity concentration of the abrasives is 1/30 or less than the sludge. The result shows that the abrasives can be reused without problems when the wet blasting decontamination technology is used. (author)

K Basins Field Verification Program

International Nuclear Information System (INIS)

Booth, H.W.

1994-01-01

The Field Verification Program establishes a uniform and systematic process to ensure that technical information depicted on selected engineering drawings accurately reflects the actual existing physical configuration. This document defines the Field Verification Program necessary to perform the field walkdown and inspection process that identifies the physical configuration of the systems required to support the mission objectives of K Basins. This program is intended to provide an accurate accounting of the actual field configuration by documenting the as-found information on a controlled drawing

Engineering drawing field verification program. Revision 3

International Nuclear Information System (INIS)

Ulk, P.F.

1994-01-01

Safe, efficient operation of waste tank farm facilities is dependent in part upon the availability of accurate, up-to-date plant drawings. Accurate plant drawings are also required in support of facility upgrades and future engineering remediation projects. This supporting document establishes the procedure for performing a visual field verification of engineering drawings, the degree of visual observation being performed and documenting the results. A copy of the drawing attesting to the degree of visual observation will be paginated into the released Engineering Change Notice (ECN) documenting the field verification for future retrieval and reference. All waste tank farm essential and support drawings within the scope of this program will be converted from manual to computer aided drafting (CAD) drawings. A permanent reference to the field verification status will be placed along the right border of the CAD-converted drawing, referencing the revision level, at which the visual verification was performed and documented

Verification of Open Interactive Markov Chains

OpenAIRE

Brazdil, Tomas; Hermanns, Holger; Krcal, Jan; Kretinsky, Jan; Rehak, Vojtech

2012-01-01

Interactive Markov chains (IMC) are compositional behavioral models extending both labeled transition systems and continuous-time Markov chains. IMC pair modeling convenience - owed to compositionality properties - with effective verification algorithms and tools - owed to Markov properties. Thus far however, IMC verification did not consider compositionality properties, but considered closed systems. This paper discusses the evaluation of IMC in an open and thus compositional interpretation....

Earth Science Enterprise Scientific Data Purchase Project: Verification and Validation

Science.gov (United States)

Jenner, Jeff; Policelli, Fritz; Fletcher, Rosea; Holecamp, Kara; Owen, Carolyn; Nicholson, Lamar; Dartez, Deanna

2000-01-01

This paper presents viewgraphs on the Earth Science Enterprise Scientific Data Purchase Project's verification,and validation process. The topics include: 1) What is Verification and Validation? 2) Why Verification and Validation? 3) Background; 4) ESE Data Purchas Validation Process; 5) Data Validation System and Ingest Queue; 6) Shipment Verification; 7) Tracking and Metrics; 8) Validation of Contract Specifications; 9) Earth Watch Data Validation; 10) Validation of Vertical Accuracy; and 11) Results of Vertical Accuracy Assessment.

Can Economics Provide Insights into Trust Infrastructure?

Science.gov (United States)

Vishik, Claire

Many security technologies require infrastructure for authentication, verification, and other processes. In many cases, viable and innovative security technologies are never adopted on a large scale because the necessary infrastructure is slow to emerge. Analyses of such technologies typically focus on their technical flaws, and research emphasizes innovative approaches to stronger implementation of the core features. However, an observation can be made that in many cases the success of adoption pattern depends on non-technical issues rather than technology-lack of economic incentives, difficulties in finding initial investment, inadequate government support. While a growing body of research is dedicated to economics of security and privacy in general, few theoretical studies in this area have been completed, and even fewer that look at the economics of “trust infrastructure” beyond simple “cost of ownership” models. This exploratory paper takes a look at some approaches in theoretical economics to determine if they can provide useful insights into security infrastructure technologies and architectures that have the best chance to be adopted. We attempt to discover if models used in theoretical economics can help inform technology developers of the optimal business models that offer a better chance for quick infrastructure deployment.

Design verification for large reprocessing plants (Proposed procedures)

International Nuclear Information System (INIS)

Rolandi, G.

1988-07-01

In the 1990s, four large commercial reprocessing plants will progressively come into operation: If an effective and efficient safeguards system is to be applied to these large and complex plants, several important factors have to be considered. One of these factors, addressed in the present report, concerns plant design verification. Design verification provides an overall assurance on plant measurement data. To this end design verification, although limited to the safeguards aspects of the plant, must be a systematic activity, which starts during the design phase, continues during the construction phase and is particularly performed during the various steps of the plant's commissioning phase. The detailed procedures for design information verification on commercial reprocessing plants must be defined within the frame of the general provisions set forth in INFCIRC/153 for any type of safeguards related activities and specifically for design verification. The present report is intended as a preliminary contribution on a purely technical level, and focusses on the problems within the Agency. For the purpose of the present study the most complex case was assumed: i.e. a safeguards system based on conventional materials accountancy, accompanied both by special input and output verification and by some form of near-real-time accountancy involving in-process inventory taking, based on authenticated operator's measurement data. C/S measures are also foreseen, where necessary to supplement the accountancy data. A complete ''design verification'' strategy comprehends: informing the Agency of any changes in the plant system which are defined as ''safeguards relevant''; ''reverifying by the Agency upon receiving notice from the Operator on any changes, on ''design information''. 13 refs

Material integrity verification radar

International Nuclear Information System (INIS)

Koppenjan, S.K.

1999-01-01

The International Atomic Energy Agency (IAEA) has the need for verification of 'as-built' spent fuel-dry storage containers and other concrete structures. The IAEA has tasked the Special Technologies Laboratory (STL) to fabricate, test, and deploy a stepped-frequency Material Integrity Verification Radar (MIVR) system to nondestructively verify the internal construction of these containers. The MIVR system is based on previously deployed high-frequency, ground penetrating radar (GPR) systems that have been developed by STL for the U.S. Department of Energy (DOE). Whereas GPR technology utilizes microwave radio frequency energy to create subsurface images, MTVR is a variation for which the medium is concrete instead of soil. The purpose is to nondestructively verify the placement of concrete-reinforcing materials, pipes, inner liners, and other attributes of the internal construction. The MIVR system underwent an initial field test on CANDU reactor spent fuel storage canisters at Atomic Energy of Canada Limited (AECL), Chalk River Laboratories, Ontario, Canada, in October 1995. A second field test at the Embalse Nuclear Power Plant in Embalse, Argentina, was completed in May 1996. The DOE GPR also was demonstrated at the site. Data collection and analysis were performed for the Argentine National Board of Nuclear Regulation (ENREN). IAEA and the Brazilian-Argentine Agency for the Control and Accounting of Nuclear Material (ABACC) personnel were present as observers during the test. Reinforcing materials were evident in the color, two-dimensional images produced by the MIVR system. A continuous pattern of reinforcing bars was evident and accurate estimates on the spacing, depth, and size were made. The potential uses for safeguard applications were jointly discussed. The MIVR system, as successfully demonstrated in the two field tests, can be used as a design verification tool for IAEA safeguards. A deployment of MIVR for Design Information Questionnaire (DIQ

Fiction and reality in the modelling world - Balance between simplicity and complexity, calibration and identifiability, verification and falsification

DEFF Research Database (Denmark)

Harremoës, P.; Madsen, H.

1999-01-01

Where is the balance between simplicity and complexity in model prediction of urban drainage structures? The calibration/verification approach to testing of model performance gives an exaggerated sense of certainty. Frequently, the model structure and the parameters are not identifiable by calibr......Where is the balance between simplicity and complexity in model prediction of urban drainage structures? The calibration/verification approach to testing of model performance gives an exaggerated sense of certainty. Frequently, the model structure and the parameters are not identifiable...... by calibration/verification on the basis of the data series available, which generates elements of sheer guessing - unless the universality of the model is be based on induction, i.e. experience from the sum of all previous investigations. There is a need to deal more explicitly with uncertainty...

Specification and Automated Verification of Real-Time Behaviour

DEFF Research Database (Denmark)

Kristensen, C.H.; Andersen, J.H.; Skou, A.

1995-01-01

In this paper we sketch a method for specification and automatic verification of real-time software properties.......In this paper we sketch a method for specification and automatic verification of real-time software properties....

Specification and Automated Verification of Real-Time Behaviour

DEFF Research Database (Denmark)

Andersen, J.H.; Kristensen, C.H.; Skou, A.

1996-01-01

In this paper we sketch a method for specification and automatic verification of real-time software properties.......In this paper we sketch a method for specification and automatic verification of real-time software properties....

Verification of possible asymmetry of polarization of thermal neutrons reflected by a mirror

International Nuclear Information System (INIS)

Okorokov, A.I.; Runov, V.V.; Gukasov, A.G.; Shchebetov, A.F.

1976-01-01

Experiments with a polarizing neutron guide do not confirm the neutron polarization asymmetry observed previously by Berndorfer for neutrons traversing a polarizing neutron guide. In connection with the spin-orbit effects a verification is carried out on single reflection of neutrons by magnetic or nonmagnetic mirrors. With an accuracy of 10 -4 -10 -3 no polarization asymmetry is observed

Biometric Technologies and Verification Systems

CERN Document Server

Vacca, John R

2007-01-01

Biometric Technologies and Verification Systems is organized into nine parts composed of 30 chapters, including an extensive glossary of biometric terms and acronyms. It discusses the current state-of-the-art in biometric verification/authentication, identification and system design principles. It also provides a step-by-step discussion of how biometrics works; how biometric data in human beings can be collected and analyzed in a number of ways; how biometrics are currently being used as a method of personal identification in which people are recognized by their own unique corporal or behavior

Runtime Verification Through Forward Chaining

Directory of Open Access Journals (Sweden)

Alan Perotti

2014-12-01

Full Text Available In this paper we present a novel rule-based approach for Runtime Verification of FLTL properties over finite but expanding traces. Our system exploits Horn clauses in implication form and relies on a forward chaining-based monitoring algorithm. This approach avoids the branching structure and exponential complexity typical of tableaux-based formulations, creating monitors with a single state and a fixed number of rules. This allows for a fast and scalable tool for Runtime Verification: we present the technical details together with a working implementation.

Current status of verification practices in clinical biochemistry in Spain.

Science.gov (United States)

Gómez-Rioja, Rubén; Alvarez, Virtudes; Ventura, Montserrat; Alsina, M Jesús; Barba, Núria; Cortés, Mariano; Llopis, María Antonia; Martínez, Cecilia; Ibarz, Mercè

2013-09-01

Verification uses logical algorithms to detect potential errors before laboratory results are released to the clinician. Even though verification is one of the main processes in all laboratories, there is a lack of standardization mainly in the algorithms used and the criteria and verification limits applied. A survey in clinical laboratories in Spain was conducted in order to assess the verification process, particularly the use of autoverification. Questionnaires were sent to the laboratories involved in the External Quality Assurance Program organized by the Spanish Society of Clinical Biochemistry and Molecular Pathology. Seven common biochemical parameters were included (glucose, cholesterol, triglycerides, creatinine, potassium, calcium, and alanine aminotransferase). Completed questionnaires were received from 85 laboratories. Nearly all the laboratories reported using the following seven verification criteria: internal quality control, instrument warnings, sample deterioration, reference limits, clinical data, concordance between parameters, and verification of results. The use of all verification criteria varied according to the type of verification (automatic, technical, or medical). Verification limits for these parameters are similar to biological reference ranges. Delta Check was used in 24% of laboratories. Most laboratories (64%) reported using autoverification systems. Autoverification use was related to laboratory size, ownership, and type of laboratory information system, but amount of use (percentage of test autoverified) was not related to laboratory size. A total of 36% of Spanish laboratories do not use autoverification, despite the general implementation of laboratory information systems, most of them, with autoverification ability. Criteria and rules for seven routine biochemical tests were obtained.

Complementary technologies for verification of excess plutonium

International Nuclear Information System (INIS)

Langner, D.G.; Nicholas, N.J.; Ensslin, N.; Fearey, B.L.; Mitchell, D.J.; Marlow, K.W.; Luke, S.J.; Gosnell, T.B.

1998-01-01

Three complementary measurement technologies have been identified as candidates for use in the verification of excess plutonium of weapons origin. These technologies: high-resolution gamma-ray spectroscopy, neutron multiplicity counting, and low-resolution gamma-ray spectroscopy, are mature, robust technologies. The high-resolution gamma-ray system, Pu-600, uses the 630--670 keV region of the emitted gamma-ray spectrum to determine the ratio of 240 Pu to 239 Pu. It is useful in verifying the presence of plutonium and the presence of weapons-grade plutonium. Neutron multiplicity counting is well suited for verifying that the plutonium is of a safeguardable quantity and is weapons-quality material, as opposed to residue or waste. In addition, multiplicity counting can independently verify the presence of plutonium by virtue of a measured neutron self-multiplication and can detect the presence of non-plutonium neutron sources. The low-resolution gamma-ray spectroscopic technique is a template method that can provide continuity of knowledge that an item that enters the a verification regime remains under the regime. In the initial verification of an item, multiple regions of the measured low-resolution spectrum form a unique, gamma-radiation-based template for the item that can be used for comparison in subsequent verifications. In this paper the authors discuss these technologies as they relate to the different attributes that could be used in a verification regime

Project report: Experimental planning and verification of working fluids (WP 5)

DEFF Research Database (Denmark)

Babi, Deenesh Kavi

working fluid candidates a database is required that can be simultaneously searched in order to differentiate and determine whether the generated candidates are existing or novel. Also, the next step upon selection of the candidates is performing experiments in order to test and verify the generated...... working fluids. If performed properly, the experimental step is solely verification. Experiments can either be performed virtually (in order to further reduce the number of required experiments) and/or physically. Therefore the objective of this work was the development of a database of existing working......Computer-aided molecular design (CAMD) helps in the reduction of experiments for the selection/design of optimal working fluids. In reducing the number of experiments, solutions obtain by trial and error is replaced by solutions that are based on mixture-process properties. In generating optimal...

A Synthesized Framework for Formal Verification of Computing Systems

Directory of Open Access Journals (Sweden)

Nikola Bogunovic

2003-12-01

Full Text Available Design process of computing systems gradually evolved to a level that encompasses formal verification techniques. However, the integration of formal verification techniques into a methodical design procedure has many inherent miscomprehensions and problems. The paper explicates the discrepancy between the real system implementation and the abstracted model that is actually used in the formal verification procedure. Particular attention is paid to the seamless integration of all phases of the verification procedure that encompasses definition of the specification language and denotation and execution of conformance relation between the abstracted model and its intended behavior. The concealed obstacles are exposed, computationally expensive steps identified and possible improvements proposed.

Economic Education Experiences of Enterprising Teachers. Volume 31.

Science.gov (United States)

Nappi, Andrew T., Ed.

This book describes award-winning teacher-developed projects and courses in economics. The reports are condensed versions of the original projects and are divided into grade levels. Primary Level includes: "Primary Pickle People Packed a Peck of Pickle Economics" (Karen L. Cragg; Katherine J. Van Horn); "Fabulous Economics" (Elizabeth B.…

Independent verification in operations at nuclear power plants

International Nuclear Information System (INIS)

Donderi, D.C.; Smiley, A.; Ostry, D.J.; Moray, N.P.

1995-09-01

A critical review of approaches to independent verification in operations used in nuclear power plant quality assurance programs in other countries, was conducted for this study. This report identifies the uses of independent verification and provides an assessment of the effectiveness of the various approaches. The findings indicate that at Canadian nuclear power plants as much, if not more, independent verification is performed than at power plants in the other countries included in the study. Additional requirements in this area are not proposed for Canadian stations. (author)

Testing, verification and application of CONTAIN for severe accident analysis of LMFBR-containments

International Nuclear Information System (INIS)

Langhans, J.

1991-01-01

Severe accident analysis for LMFBR-containments has to consider various phenomena influencing the development of containment loads as pressure and temperatures as well as generation, transport, depletion and release of aerosols and radioactive materials. As most of the different phenomena are linked together their feedback has to be taken into account within the calculation of severe accident consequences. Otherwise no best-estimate results can be assured. Under the sponsorship of the German BMFT the US code CONTAIN is being developed, verified and applied in GRS for future fast breeder reactor concepts. In the first step of verification, the basic calculation models of a containment code have been proven: (i) flow calculation for different flow situations, (ii) heat transfer from and to structures, (iii) coolant evaporation, boiling and condensation, (iv) material properties. In the second step the proof of the interaction of coupled phenomena has been checked. The calculation of integrated containment experiments relating natural convection flow, structure heating and coolant condensation as well as parallel calculation of results obtained with an other code give detailed information on the applicability of CONTAIN. The actual verification status allows the following conclusion: a caucious analyst experienced in containment accident modelling using the proven parts of CONTAIN will obtain results which have the same accuracy as other well optimized and detailed lumped parameter containment codes can achieve. Further code development, additional verification and international exchange of experience and results will assure an adequate code for the application in safety analyses for LMFBRs. (orig.)

Whole-core thermal-hydraulic transient code development and verification for LMFBR analysis

International Nuclear Information System (INIS)

Spencer, D.R.

1979-04-01

Predicted performance during both steady state and transient reactor operation determines the steady state operating limits on LMFBRs. Unnecessary conservatism in performance predictions will not contribute to safety, but will restrict the reactor to more conservative, less economical steady state operation. The most general method for reducing analytical conservatism in LMFBR's without compromising safety is to develop, validate and apply more sophisticated computer models to the limiting performance analyses. The purpose of the on-going Natural Circulation Verification Program (NCVP) is to develop and validate computer codes to analyze natural circulation transients in LMFBRs, and thus, replace unnecessary analytical conservatism with demonstrated calculational capability

Entanglement verification and its applications in quantum communication; Verschraenkungsnachweise mit Anwendungen in der Quantenkommunikation

Energy Technology Data Exchange (ETDEWEB)

Haeseler, Hauke

2010-02-16

coherent storage of light, we focus on the storage of squeezed light. This situation requires an extension of our verification procedure to sources of mixed input states. We propose such an extension, and give a detailed analysis of its application to squeezed thermal states, displaced thermal states and mixed qubit states. This is supplemented by finding the optimal entanglement-breaking channels for each of these situations, which provides us with an indication of the strength of the extension to our entanglement criterion. The subject of Chapter 6 is also the benchmarking of quantum memory or teleportation experiments. Considering a number of recently published benchmark criteria, we investigate the question which one is most useful to actual experiments. We first compare the different criteria for typical settings and sort them according to their resilience to excess noise. Then, we introduce a further improvement to the Expectation Value Matrix method, which results in the desired optimal benchmark criterion. Finally, we investigate naturally occurring phase fluctuations and find them to further simplify the implementation of our criterion. Thus, we formulate the first truly useful way of validating experiments for the quantum storage or transmission of light. (orig.)

ESTRO ACROP guidelines for positioning, immobilisation and position verification of head and neck patients for radiation therapists

Directory of Open Access Journals (Sweden)

Michelle Leech

2017-03-01

Full Text Available Background and purpose: Over the last decade, the management of locally advanced head and neck cancers (HNCs has seen a substantial increase in the use of chemoradiation. These guidelines have been developed to assist Radiation TherapisTs (RTTs in positioning, immobilisation and position verification for head and neck cancer patients. Materials and methods: A critical review of the literature was undertaken by the writing committee.Based on the literature review, a survey was developed to ascertain the current positioning, immobilisation and position verification methods for head and neck radiation therapy across Europe. The survey was translated into Italian, German, Greek, Portuguese, Russian, Croatian, French and Spanish.Guidelines were subsequently developed by the writing committee. Results: Results from the survey indicated that a wide variety of treatment practices and treatment verification protocols are in operation for head and neck cancer patients across Europe currently.The guidelines developed are based on the experience and expertise of the writing committee, remaining cognisant of the variations in imaging and immobilisation techniques used currently in Europe. Conclusions: These guidelines have been developed to provide RTTs with guidance on positioning, immobilisation and position verification of HNC patients. The guidelines will also provide RTTs with the means to critically reflect on their own daily clinical practice with this patient group. Keywords: Head and neck, Immobilisation, Positioning, Verification

Verification in Referral-Based Crowdsourcing

Science.gov (United States)

Naroditskiy, Victor; Rahwan, Iyad; Cebrian, Manuel; Jennings, Nicholas R.

2012-01-01

Online social networks offer unprecedented potential for rallying a large number of people to accomplish a given task. Here we focus on information gathering tasks where rare information is sought through “referral-based crowdsourcing”: the information request is propagated recursively through invitations among members of a social network. Whereas previous work analyzed incentives for the referral process in a setting with only correct reports, misreporting is known to be both pervasive in crowdsourcing applications, and difficult/costly to filter out. A motivating example for our work is the DARPA Red Balloon Challenge where the level of misreporting was very high. In order to undertake a formal study of verification, we introduce a model where agents can exert costly effort to perform verification and false reports can be penalized. This is the first model of verification and it provides many directions for future research, which we point out. Our main theoretical result is the compensation scheme that minimizes the cost of retrieving the correct answer. Notably, this optimal compensation scheme coincides with the winning strategy of the Red Balloon Challenge. PMID:23071530

Nuclear Data Verification and Standardization

Energy Technology Data Exchange (ETDEWEB)

Karam, Lisa R.; Arif, Muhammad; Thompson, Alan K.

2011-10-01

The objective of this interagency program is to provide accurate neutron interaction verification and standardization data for the U.S. Department of Energy Division of Nuclear Physics programs which include astrophysics, radioactive beam studies, and heavy-ion reactions. The measurements made in this program are also useful to other programs that indirectly use the unique properties of the neutron for diagnostic and analytical purposes. These include homeland security, personnel health and safety, nuclear waste disposal, treaty verification, national defense, and nuclear based energy production. The work includes the verification of reference standard cross sections and related neutron data employing the unique facilities and capabilities at NIST and other laboratories as required; leadership and participation in international intercomparisons and collaborations; and the preservation of standard reference deposits. An essential element of the program is critical evaluation of neutron interaction data standards including international coordinations. Data testing of critical data for important applications is included. The program is jointly supported by the Department of Energy and the National Institute of Standards and Technology.

Verification and quality control of routine hematology analyzers

NARCIS (Netherlands)

Vis, J Y; Huisman, A

2016-01-01

Verification of hematology analyzers (automated blood cell counters) is mandatory before new hematology analyzers may be used in routine clinical care. The verification process consists of several items which comprise among others: precision, accuracy, comparability, carryover, background and

Solid waste operations complex engineering verification program plan

International Nuclear Information System (INIS)

Bergeson, C.L.

1994-01-01

This plan supersedes, but does not replace, the previous Waste Receiving and Processing/Solid Waste Engineering Development Program Plan. In doing this, it does not repeat the basic definitions of the various types or classes of development activities nor provide the rigorous written description of each facility and assign the equipment to development classes. The methodology described in the previous document is still valid and was used to determine the types of verification efforts required. This Engineering Verification Program Plan will be updated on a yearly basis. This EVPP provides programmatic definition of all engineering verification activities for the following SWOC projects: (1) Project W-026 - Waste Receiving and Processing Facility Module 1; (2) Project W-100 - Waste Receiving and Processing Facility Module 2A; (3) Project W-112 - Phase V Storage Facility; and (4) Project W-113 - Solid Waste Retrieval. No engineering verification activities are defined for Project W-112 as no verification work was identified. The Acceptance Test Procedures/Operational Test Procedures will be part of each project's Title III operation test efforts. The ATPs/OTPs are not covered by this EVPP

21 CFR 21.44 - Verification of identity.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Verification of identity. 21.44 Section 21.44 Food... Verification of identity. (a) An individual seeking access to records in a Privacy Act Record System may be... identity. The identification required shall be suitable considering the nature of the records sought. No...

Dynamic Calibration and Verification Device of Measurement System for Dynamic Characteristic Coefficients of Sliding Bearing

Science.gov (United States)

Chen, Runlin; Wei, Yangyang; Shi, Zhaoyang; Yuan, Xiaoyang

2016-01-01

The identification accuracy of dynamic characteristics coefficients is difficult to guarantee because of the errors of the measurement system itself. A novel dynamic calibration method of measurement system for dynamic characteristics coefficients is proposed in this paper to eliminate the errors of the measurement system itself. Compared with the calibration method of suspension quality, this novel calibration method is different because the verification device is a spring-mass system, which can simulate the dynamic characteristics of sliding bearing. The verification device is built, and the calibration experiment is implemented in a wide frequency range, in which the bearing stiffness is simulated by the disc springs. The experimental results show that the amplitude errors of this measurement system are small in the frequency range of 10 Hz–100 Hz, and the phase errors increase along with the increasing of frequency. It is preliminarily verified by the simulated experiment of dynamic characteristics coefficients identification in the frequency range of 10 Hz–30 Hz that the calibration data in this frequency range can support the dynamic characteristics test of sliding bearing in this frequency range well. The bearing experiments in greater frequency ranges need higher manufacturing and installation precision of calibration device. Besides, the processes of calibration experiments should be improved. PMID:27483283

Digit Ratio (2D:4D) Predicts Self-Reported Measures of General Competitiveness, but Not Behavior in Economic Experiments.

Science.gov (United States)

Bönte, Werner; Procher, Vivien D; Urbig, Diemo; Voracek, Martin

2017-01-01

The ratio of index finger length to ring finger length (2D:4D) is considered to be a putative biomarker of prenatal androgen exposure (PAE), with previous research suggesting that 2D:4D is associated with human behaviors, especially sex-typical behaviors. This study empirically examines the relationship between 2D:4D and individual competitiveness, a behavioral trait that is found to be sexually dimorphic. We employ two related, but distinct, measures of competitiveness, namely behavioral measures obtained from economic experiments and psychometric self-reported measures. Our analyses are based on two independent data sets obtained from surveys and economic experiments with 461 visitors of a shopping mall (Study I) and 617 university students (Study II). The correlation between behavior in the economic experiment and digit ratios of both hands is not statistically significant in either study. In contrast, we find a negative and statistically significant relationship between psychometric self-reported measures of competitiveness and right hand digit ratios (R2D:4D) in both studies. This relationship is especially strong for younger people. Hence, this study provides some robust empirical evidence for a negative association between R2D:4D and self-reported competitiveness. We discuss potential reasons why digit ratio may relate differently to behaviors in specific economics experiments and to self-reported general competitiveness.

Digit Ratio (2D:4D Predicts Self-Reported Measures of General Competitiveness, but Not Behavior in Economic Experiments

Directory of Open Access Journals (Sweden)

Werner Bönte

2017-12-01

Full Text Available The ratio of index finger length to ring finger length (2D:4D is considered to be a putative biomarker of prenatal androgen exposure (PAE, with previous research suggesting that 2D:4D is associated with human behaviors, especially sex-typical behaviors. This study empirically examines the relationship between 2D:4D and individual competitiveness, a behavioral trait that is found to be sexually dimorphic. We employ two related, but distinct, measures of competitiveness, namely behavioral measures obtained from economic experiments and psychometric self-reported measures. Our analyses are based on two independent data sets obtained from surveys and economic experiments with 461 visitors of a shopping mall (Study I and 617 university students (Study II. The correlation between behavior in the economic experiment and digit ratios of both hands is not statistically significant in either study. In contrast, we find a negative and statistically significant relationship between psychometric self-reported measures of competitiveness and right hand digit ratios (R2D:4D in both studies. This relationship is especially strong for younger people. Hence, this study provides some robust empirical evidence for a negative association between R2D:4D and self-reported competitiveness. We discuss potential reasons why digit ratio may relate differently to behaviors in specific economics experiments and to self-reported general competitiveness.

Verification and uncertainty evaluation of CASMO-3/MASTER nuclear analysis system

Energy Technology Data Exchange (ETDEWEB)

Song, Jae Seung; Cho, Byung Oh; Joo, Han Kyu; Zee, Sung Quun; Lee, Chung Chan; Park, Sang Yoon

2000-06-01

MASTER is a nuclear design code developed by KAERI. It uses group constants generated by CASMO-3 developed by Studsvik. In this report the verification and evaluation of uncertainty were performed for the code system application in nuclear reactor core analysis and design. The verification is performed via various benchmark comparisons for static and transient core condition, and core follow calculations with startup physics test predictions of total 14 cycles of pressurized water reactors. Benchmark calculation include comparisons with reference solutions of IAEA and OECA/NEA problems and critical experiment measurements. The uncertainty evaluation is focused to safety related parameters such as power distribution, reactivity coefficients, control rod worth and core reactivity. It is concluded that CASMO-3/MASTER can be applied for PWR core nuclear analysis and design without any bias factors. Also, it is verified that the system can be applied for SMART core, via supplemental comparisons with reference calculations by MCNP which is a probabilistic nuclear calculation code.

Verification and uncertainty evaluation of CASMO-3/MASTER nuclear analysis system

International Nuclear Information System (INIS)

Song, Jae Seung; Cho, Byung Oh; Joo, Han Kyu; Zee, Sung Quun; Lee, Chung Chan; Park, Sang Yoon

2000-06-01

MASTER is a nuclear design code developed by KAERI. It uses group constants generated by CASMO-3 developed by Studsvik. In this report the verification and evaluation of uncertainty were performed for the code system application in nuclear reactor core analysis and design. The verification is performed via various benchmark comparisons for static and transient core condition, and core follow calculations with startup physics test predictions of total 14 cycles of pressurized water reactors. Benchmark calculation include comparisons with reference solutions of IAEA and OECA/NEA problems and critical experiment measurements. The uncertainty evaluation is focused to safety related parameters such as power distribution, reactivity coefficients, control rod worth and core reactivity. It is concluded that CASMO-3/MASTER can be applied for PWR core nuclear analysis and design without any bias factors. Also, it is verified that the system can be applied for SMART core, via supplemental comparisons with reference calculations by MCNP which is a probabilistic nuclear calculation code

The verification of PWR-fuel code for PWR in-core fuel management

International Nuclear Information System (INIS)

Surian Pinem; Tagor M Sembiring; Tukiran

2015-01-01

In-core fuel management for PWR is not easy because of the number of fuel assemblies in the core as much as 192 assemblies so many possibilities for placement of the fuel in the core. Configuration of fuel assemblies in the core must be precise and accurate so that the reactor operates safely and economically. It is necessary for verification of PWR-FUEL code that will be used in-core fuel management for PWR. PWR-FUEL code based on neutron transport theory and solved with the approach of multi-dimensional nodal diffusion method many groups and diffusion finite difference method (FDM). The goal is to check whether the program works fine, especially for the design and in-core fuel management for PWR. Verification is done with equilibrium core search model at three conditions that boron free, 1000 ppm boron concentration and critical boron concentration. The result of the average burn up fuel assemblies distribution and power distribution at BOC and EOC showed a consistent trend where the fuel with high power at BOC will produce a high burn up in the EOC. On the core without boron is obtained a high multiplication factor because absence of boron in the core and the effect of fission products on the core around 3.8 %. Reactivity effect at 1000 ppm boron solution of BOC and EOC is 6.44 % and 1.703 % respectively. Distribution neutron flux and power density using NODAL and FDM methods have the same result. The results show that the verification PWR-FUEL code work properly, especially for core design and in-core fuel management for PWR. (author)

Verification and Performance Analysis for Embedded Systems

DEFF Research Database (Denmark)

Larsen, Kim Guldstrand

2009-01-01

This talk provides a thorough tutorial of the UPPAAL tool suite for, modeling, simulation, verification, optimal scheduling, synthesis, testing and performance analysis of embedded and real-time systems.......This talk provides a thorough tutorial of the UPPAAL tool suite for, modeling, simulation, verification, optimal scheduling, synthesis, testing and performance analysis of embedded and real-time systems....

SASSYS-1 computer code verification with EBR-II test data

International Nuclear Information System (INIS)

Warinner, D.K.; Dunn, F.E.

1985-01-01

The EBR-II natural circulation experiment, XX08 Test 8A, is simulated with the SASSYS-1 computer code and the results for the latter are compared with published data taken during the transient at selected points in the core. The SASSYS-1 results provide transient temperature and flow responses for all points of interest simultaneously during one run, once such basic parameters as pipe sizes, initial core flows, and elevations are specified. The SASSYS-1 simulation results for the EBR-II experiment XX08 Test 8A, conducted in March 1979, are within the published plant data uncertainties and, thereby, serve as a partial verification/validation of the SASSYS-1 code

Tolerance Verification of Micro and Nano Structures on Polycarbonate Substrates

DEFF Research Database (Denmark)

Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard

2010-01-01

Micro and nano structures are an increasing challenge in terms of tolerance verification and process quality control: smaller dimensions led to a smaller tolerance zone to be evaluated. This paper focuses on the verification of CD, DVD and HD-DVD nanoscale features. CD tolerance features are defi......Micro and nano structures are an increasing challenge in terms of tolerance verification and process quality control: smaller dimensions led to a smaller tolerance zone to be evaluated. This paper focuses on the verification of CD, DVD and HD-DVD nanoscale features. CD tolerance features...

Essays in behavioral economics : Applied game theory and experiments

NARCIS (Netherlands)

Mermer, A.G.

2014-01-01

Behavioral Economics aims at understanding the decision of economic agents who are not necessarily monetary utility maximizers and accounts for the fact that agents may have other concerns next to economic gain. This thesis contributes to the literature by studying the behavior of economic agents

Standard Verification System (SVS)

Data.gov (United States)

Social Security Administration — SVS is a mainframe program that accesses the NUMIDENT to perform SSN verifications. This program is called by SSA Internal applications to verify SSNs. There is also...

TET-1- A German Microsatellite for Technology On -Orbit Verification

Science.gov (United States)

Föckersperger, S.; Lattner, K.; Kaiser, C.; Eckert, S.; Bärwald, W.; Ritzmann, S.; Mühlbauer, P.; Turk, M.; Willemsen, P.

2008-08-01

Due to the high safety standards in the space industry every new product must go through a verification process before qualifying for operation in a space system. Within the verification process the payload undergoes a series of tests which prove that it is in accordance with mission requirements in terms of function, reliability and safety. Important verification components are the qualification for use on the ground as well as the On-Orbit Verification (OOV), i.e. proof that the product is suitable for use under virtual space conditions (on-orbit). Here it is demonstrated that the product functions under conditions which cannot or can only be partially simulated on the ground. The OOV-Program of the DLR serves to bridge the gap between the product tested and qualified on the ground and the utilization of the product in space. Due to regular and short-term availability of flight opportunities industry and research facilities can verify their latest products under space conditions and demonstrate their reliability and marketability. The Technologie-Erprobungs-Tr&äger TET (Technology Experiments Carrier) comprises the core elements of the OOV Program. A programmatic requirement of the OOV Program is that a satellite bus already verified in orbit be used in the first segment of the program. An analysis of suitable satellite buses showed that a realization of the TET satellite bus based on the BIRD satellite bus fulfilled the programmatic requirements best. Kayser-Threde was selected by DLR as Prime Contractor to perform the project together with its major subcontractors Astro- und Feinwerktechnik, Berlin for the platform development and DLR-GSOC for the ground segment development. TET is now designed to be a modular and flexible micro-satellite for any orbit between 450 and 850 km altitude and inclination between 53° and SSO. With an overall mass of 120 kg TET is able to accommodate experiments of up to 50 kg. A multipurpose payload supply systemThere is

Neutron radiography experiments for verification of soluble boron mixing and transport modeling under natural circulation conditions

International Nuclear Information System (INIS)

Morlang, M.M.; Feltus, M.A.

1996-01-01

The use of neutron radiography for visualization of fluid flow through flow visualization modules has been very successful. Current experiments at the Penn State Breazeale Reactor serve to verify the mixing and transport of soluble boron under natural flow conditions as would be experienced in a pressurized water reactor. Different flow geometries have been modeled including holes, slots, and baffles. Flow modules are constructed of aluminum box material 1 1/2 inches by 4 inches in varying lengths. An experimental flow system was built which pumps fluid to a head tank and natural circulation flow occurs from the head tank through the flow visualization module to be radio-graphed. The entire flow system is mounted on a portable assembly to allow placement of the flow visualization module in front of the neutron beam port. A neutron-transparent fluor-inert fluid is used to simulate water at different densities. Boron is modeled by gadolinium oxide powder as a tracer element, which is placed in a mixing assembly and injected into the system a remotely operated electric valve, once the reactor is at power. The entire sequence is recorded on real-time video. Still photographs are made frame-by-frame from the video tape. Computers are used to digitally enhance the video and still photographs. The data obtained from the enhancement will be used for verification of simple geometry predictions using the TRAC and RELAP thermal-hydraulic codes. A detailed model of a reactor vessel inlet plenum, downcomer region, flow distribution area and core inlet is being constructed to model the APGOO plenum. Successive radiography experiments of each section of the model under identical conditions will provide a complete vessel / core model for comparison with the thermal-hydraulic codes

Neutron radiography experiments for verification of soluble boron mixing and transport modeling under natural circulation conditions

International Nuclear Information System (INIS)

Feltus, M.A.; Morlang, G.M.

1996-01-01

The use of neutron radiography for visualization of fluid flow through flow visualization modules has been very successful. Current experiments at the Penn State Breazeale Reactor serve to verify the mixing and transport of soluble boron under natural flow conditions as would be experienced in a pressurized water reactor. Different flow geometries have been modeled including holes, slots, and baffles. Flow modules are constructed of aluminum box material 1 1/2 inches by 4 inches in varying lengths. An experimental flow system was built which pumps fluid to a head tank and natural circulation flow occurs from the head tank through the flow visualization module to be radiographed. The entire flow system is mounted on a portable assembly to allow placement of the flow visualization module in front of the neutron beam port. A neutron-transparent fluorinert fluid is used to simulate water at different densities. Boron is modeled by gadolinium oxide powder as a tracer element, which is placed in a mixing assembly and injected into the system by remote operated electric valve, once the reactor is at power. The entire sequence is recorded on real-time video. Still photographs are made frame-by-frame from the video tape. Computers are used to digitally enhance the video and still photographs. The data obtained from the enhancement will be used for verification of simple geometry predictions using the TRAC and RELAP thermal-hydraulic codes. A detailed model of a reactor vessel inlet plenum, downcomer region, flow distribution area and core inlet is being constructed to model the AP600 plenum. Successive radiography experiments of each section of the model under identical conditions will provide a complete vessel/core model for comparison with the thermal-hydraulic codes

Packaged low-level waste verification system

International Nuclear Information System (INIS)

Tuite, K.T.; Winberg, M.; Flores, A.Y.; Killian, E.W.; McIsaac, C.V.

1996-01-01

Currently, states and low-level radioactive waste (LLW) disposal site operators have no method of independently verifying the radionuclide content of packaged LLW that arrive at disposal sites for disposal. At this time, disposal sites rely on LLW generator shipping manifests and accompanying records to insure that LLW received meets the waste acceptance criteria. An independent verification system would provide a method of checking generator LLW characterization methods and help ensure that LLW disposed of at disposal facilities meets requirements. The Mobile Low-Level Waste Verification System (MLLWVS) provides the equipment, software, and methods to enable the independent verification of LLW shipping records to insure that disposal site waste acceptance criteria are being met. The MLLWVS system was developed under a cost share subcontract between WMG, Inc., and Lockheed Martin Idaho Technologies through the Department of Energy's National Low-Level Waste Management Program at the Idaho National Engineering Laboratory (INEL)

Spent Nuclear Fuel (SNF) Project Design Verification and Validation Process

International Nuclear Information System (INIS)

OLGUIN, L.J.

2000-01-01

This document provides a description of design verification and validation activities implemented by the Spent Nuclear Fuel (SNF) Project. During the execution of early design verification, a management assessment (Bergman, 1999) and external assessments on configuration management (Augustenburg, 1999) and testing (Loscoe, 2000) were conducted and identified potential uncertainties in the verification process. This led the SNF Chief Engineer to implement corrective actions to improve process and design products. This included Design Verification Reports (DVRs) for each subproject, validation assessments for testing, and verification of the safety function of systems and components identified in the Safety Equipment List to ensure that the design outputs were compliant with the SNF Technical Requirements. Although some activities are still in progress, the results of the DVR and associated validation assessments indicate that Project requirements for design verification are being effectively implemented. These results have been documented in subproject-specific technical documents (Table 2). Identified punch-list items are being dispositioned by the Project. As these remaining items are closed, the technical reports (Table 2) will be revised and reissued to document the results of this work

Final Report for 'Verification and Validation of Radiation Hydrodynamics for Astrophysical Applications'

International Nuclear Information System (INIS)

Zingale, M.; Howell, L.H.

2010-01-01

The motivation for this work is to gain experience in the methodology of verification and validation (V and V) of astrophysical radiation hydrodynamics codes. In the first period of this work, we focused on building the infrastructure to test a single astrophysical application code, Castro, developed in collaboration between Lawrence Livermore National Laboratory (LLNL) and Lawrence Berkeley Laboratory (LBL). We delivered several hydrodynamic test problems, in the form of coded initial conditions and documentation for verification, routines to perform data analysis, and a generalized regression test suite to allow for continued automated testing. Astrophysical simulation codes aim to model phenomena that elude direct experimentation. Our only direct information about these systems comes from what we observe, and may be transient. Simulation can help further our understanding by allowing virtual experimentation of these systems. However, to have confidence in our simulations requires us to have confidence in the tools we use. Verification and Validation is a process by which we work to build confidence that a simulation code is accurately representing reality. V and V is a multistep process, and is never really complete. Once a single test problem is working as desired (i.e. that problem is verified), one wants to ensure that subsequent code changes do not break that test. At the same time, one must also search for new verification problems that test the code in a new way. It can be rather tedious to manually retest each of the problems, so before going too far with V and V, it is desirable to have an automated test suite. Our project aims to provide these basic tools for astrophysical radiation hydrodynamics codes.

As-Built Verification Plan Spent Nuclear Fuel Canister Storage Building MCO Handling Machine

International Nuclear Information System (INIS)

SWENSON, C.E.

2000-01-01

This as-built verification plan outlines the methodology and responsibilities that will be implemented during the as-built field verification activity for the Canister Storage Building (CSB) MCO HANDLING MACHINE (MHM). This as-built verification plan covers THE ELECTRICAL PORTION of the CONSTRUCTION PERFORMED BY POWER CITY UNDER CONTRACT TO MOWAT. The as-built verifications will be performed in accordance Administrative Procedure AP 6-012-00, Spent Nuclear Fuel Project As-Built Verification Plan Development Process, revision I. The results of the verification walkdown will be documented in a verification walkdown completion package, approved by the Design Authority (DA), and maintained in the CSB project files

37 CFR 262.7 - Verification of royalty payments.

Science.gov (United States)

2010-07-01

... Designated Agent have agreed as to proper verification methods. (b) Frequency of verification. A Copyright Owner or a Performer may conduct a single audit of the Designated Agent upon reasonable notice and... COPYRIGHT ARBITRATION ROYALTY PANEL RULES AND PROCEDURES RATES AND TERMS FOR CERTAIN ELIGIBLE...

40 CFR 1065.675 - CLD quench verification calculations.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false CLD quench verification calculations... POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.675 CLD quench verification calculations. Perform CLD quench-check calculations as follows: (a) Perform a CLD analyzer quench...

Analysis and Transformation Tools for Constrained Horn Clause Verification

DEFF Research Database (Denmark)

Kafle, Bishoksan; Gallagher, John Patrick

2014-01-01

Several techniques and tools have been developed for verification of properties expressed as Horn clauses with constraints over a background theory (CHC). Current CHC verification tools implement intricate algorithms and are often limited to certain subclasses of CHC problems. Our aim in this work...... is to investigate the use of a combination of off-the-shelf techniques from the literature in analysis and transformation of Constraint Logic Programs (CLPs) to solve challenging CHC verification problems. We find that many problems can be solved using a combination of tools based on well-known techniques from...... abstract interpretation, semantics-preserving transformations, program specialisation and query-answer transformations. This gives insights into the design of automatic, more general CHC verification tools based on a library of components....

Verification of the thermal design of electronic equipment

Energy Technology Data Exchange (ETDEWEB)

Hienonen, R.; Karjalainen, M.; Lankinen, R. [VTT Automation, Espoo (Finland). ProTechno

1997-12-31

The project `Verification of the thermal design of electronic equipment` studied the methodology to be followed in the verification of thermal design of electronic equipment. This project forms part of the `Cool Electronics` research programme funded by TEKES, the Finnish Technology Development Centre. This project was carried out jointly by VTT Automation, Lappeenranta University of Technology, Nokia Research Center and ABB Industry Oy VSD-Technology. The thermal design of electronic equipment has a significant impact on the cost, reliability, tolerance to different environments, selection of components and materials, and ergonomics of the product. This report describes the method for verification of thermal design. It assesses the goals set for thermal design, environmental requirements, technical implementation of the design, thermal simulation and modelling, and design qualification testing and the measurements needed. The verification method covers all packaging levels of electronic equipment from the system level to the electronic component level. The method described in this report can be used as part of the quality system of a corporation. The report includes information about the measurement and test methods needed in the verification process. Some measurement methods for the temperature, flow and pressure of air are described. (orig.) Published in Finnish VTT Julkaisuja 824. 22 refs.

Methods of Software Verification

Directory of Open Access Journals (Sweden)

R. E. Gurin

2015-01-01

Full Text Available This article is devoted to the problem of software verification (SW. Methods of software verification designed to check the software for compliance with the stated requirements such as correctness, system security and system adaptability to small changes in the environment, portability and compatibility, etc. These are various methods both by the operation process and by the way of achieving result. The article describes the static and dynamic methods of software verification and paid attention to the method of symbolic execution. In its review of static analysis are discussed and described the deductive method, and methods for testing the model. A relevant issue of the pros and cons of a particular method is emphasized. The article considers classification of test techniques for each method. In this paper we present and analyze the characteristics and mechanisms of the static analysis of dependencies, as well as their views, which can reduce the number of false positives in situations where the current state of the program combines two or more states obtained both in different paths of execution and in working with multiple object values. Dependences connect various types of software objects: single variables, the elements of composite variables (structure fields, array elements, the size of the heap areas, the length of lines, the number of initialized array elements in the verification code using static methods. The article pays attention to the identification of dependencies within the framework of the abstract interpretation, as well as gives an overview and analysis of the inference tools.Methods of dynamic analysis such as testing, monitoring and profiling are presented and analyzed. Also some kinds of tools are considered which can be applied to the software when using the methods of dynamic analysis. Based on the work a conclusion is drawn, which describes the most relevant problems of analysis techniques, methods of their solutions and

EVOLUTION OF THEORIES AND EMPIRICAL MODELS OF A RELATIONSHIP BETWEEN ECONOMIC GROWTH, SCIENCE AND INNOVATIONS (PART I

Directory of Open Access Journals (Sweden)

Kaneva M. A.

2017-12-01

Full Text Available This article is a first chapter of an analytical review of existing theoretical models of a relationship between economic growth / GRP and indicators of scientific development and innovation activities, as well as empirical approaches to testing this relationship. Aim of the paper is a systematization of existing approaches to modeling of economic growth geared by science and innovations. The novelty of the current review lies in the authors’ criteria of interconnectedness of theoretical and empirical studies in the systematization of a wide range of publications presented in a final table-scheme. In the first part of the article the authors discuss evolution of theoretical approaches, while the second chapter presents a time gap between theories and their empirical verification caused by the level of development of quantitative instruments such as econometric models. The results of this study can be used by researchers and graduate students for familiarization with current scientific approaches that manifest progress from theory to empirical verification of a relationship «economic growth-innovations» for improvement of different types of models in spatial econometrics. To apply these models to management practices the presented review could be supplemented with new criteria for classification of knowledge production functions and other theories about effect of science on economic growth.

The End-To-End Safety Verification Process Implemented to Ensure Safe Operations of the Columbus Research Module

Science.gov (United States)

Arndt, J.; Kreimer, J.

2010-09-01

The European Space Laboratory COLUMBUS was launched in February 2008 with NASA Space Shuttle Atlantis. Since successful docking and activation this manned laboratory forms part of the International Space Station(ISS). Depending on the objectives of the Mission Increments the on-orbit configuration of the COLUMBUS Module varies with each increment. This paper describes the end-to-end verification which has been implemented to ensure safe operations under the condition of a changing on-orbit configuration. That verification process has to cover not only the configuration changes as foreseen by the Mission Increment planning but also those configuration changes on short notice which become necessary due to near real-time requests initiated by crew or Flight Control, and changes - most challenging since unpredictable - due to on-orbit anomalies. Subject of the safety verification is on one hand the on orbit configuration itself including the hardware and software products, on the other hand the related Ground facilities needed for commanding of and communication to the on-orbit System. But also the operational products, e.g. the procedures prepared for crew and ground control in accordance to increment planning, are subject of the overall safety verification. In order to analyse the on-orbit configuration for potential hazards and to verify the implementation of the related Safety required hazard controls, a hierarchical approach is applied. The key element of the analytical safety integration of the whole COLUMBUS Payload Complement including hardware owned by International Partners is the Integrated Experiment Hazard Assessment(IEHA). The IEHA especially identifies those hazardous scenarios which could potentially arise through physical and operational interaction of experiments. A major challenge is the implementation of a Safety process which owns quite some rigidity in order to provide reliable verification of on-board Safety and which likewise provides enough

Verification and Validation in Systems Engineering

CERN Document Server

Debbabi, Mourad; Jarraya, Yosr; Soeanu, Andrei; Alawneh, Luay

2010-01-01

"Verification and validation" represents an important process used for the quality assessment of engineered systems and their compliance with the requirements established at the beginning of or during the development cycle. Debbabi and his coauthors investigate methodologies and techniques that can be employed for the automatic verification and validation of systems engineering design models expressed in standardized modeling languages. Their presentation includes a bird's eye view of the most prominent modeling languages for software and systems engineering, namely the Unified Model

ASAMPSA-E guidance for level 2 PSA Volume 3. Verification and improvement of SAM strategies with L2 PSA

International Nuclear Information System (INIS)

Rahni, N.; Raimond, E.; Jan, P.; Lopez, J.; Loeffler, H.; Mildenberger, O.; Kubicek, J.; Vitazkova, J.; Ivanov, I.; Groudev, P.; Lajtha, G.; Serrano, C.; Zhabin, O.; Prosek, Andrej; Dirksen, G.; Yu, S.; Oury, L.; Hultqvist, G.

2016-01-01

For each NPP, severe accident management (SAM) strategies shall make use of components or systems and human resources to limit as far as possible the consequences of any severe accident on-site and off-site. L2 PSA is one of the tools that can be used to verify and improve these strategies. The present report (deliverable D40.5 of the project ASAMPSA-E) provides an opportunity for a comparison of objectives in the different countries in terms of SAM strategies verification and improvement. The report summarizes also experience of each partner (including potential deficiencies) involved in this activity, in order to derive some good practices and required progress, addressing: - SAM modeling in L2 PSA, - Positive and negative aspects in current SAM practices, - Discussion on possible criteria related to L2 PSA for verification and improvement: risk reduction (in relation with WP30 activities on risk metrics), reduction of uncertainties on the severe accident progression paths until NPP stabilization, reduction of human failure conditional probabilities (depending on the SAM strategy, the environmental conditions...), - Review with a perspective of verification and improvement of the main SAM strategies (corium cooling, RCS depressurization, control of flammable gases, reactivity control, containment function, containment pressure control, limitation of radioactive releases,...), - SAM strategies to be considered in the context of an extended L2 PSA (as far possible, depending on existing experience), taking into account all operating modes, accidents also occurring in the SFPs and long term and multi-unit accidents. The deliverable D40.5 is developed from the partners' experience. Many of the topics described here are beyond the common practices of L2 PSA applications: in some countries, L2 PSA application is limited to the calculations of frequencies of release categories with no formal requirement for SAM verification and improvement. (authors)

Testing and verification of a novel single-channel IGBT driver circuit

OpenAIRE

Lukić, Milan; Ninković, Predrag

2016-01-01

This paper presents a novel single-channel IGBT driver circuit together with a procedure for testing and verification. It is based on a specialized integrated circuit with complete range of protective functions. Experiments are performed to test and verify its behaviour. Experimental results are presented in the form of oscilloscope recordings. It is concluded that the new driver circuit is compatible with modern IGBT transistors and power converter demands and that it can be applied in new d...

International Energy Agency Ocean Energy Systems Task 10 Wave Energy Converter Modeling Verification and Validation: Preprint

Energy Technology Data Exchange (ETDEWEB)

Wendt, Fabian F [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Nielsen, Kim [Ramboll, Copenhagen (Denmark); Ruehl, Kelley [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bunnik, Tim [MARIN (Netherlands); Touzon, Imanol [Tecnalia (Spain); Nam, Bo Woo [KRISO (Korea, Rep. of); Kim, Jeong Seok [KRISO (Korea, Rep. of); Janson, Carl Erik [Chalmers University (Sweden); Jakobsen, Ken-Robert [EDRMedeso (Norway); Crowley, Sarah [WavEC (Portugal); Vega, Luis [Hawaii Natural Energy Institute (United States); Rajagopalan, Krishnakimar [Hawaii Natural Energy Institute (United States); Mathai, Thomas [Glosten (United States); Greaves, Deborah [Plymouth University (United Kingdom); Ransley, Edward [Plymouth University (United Kingdom); Lamont-Kane, Paul [Queen' s University Belfast (United Kingdom); Sheng, Wanan [University College Cork (Ireland); Costello, Ronan [Wave Venture (United Kingdom); Kennedy, Ben [Wave Venture (United Kingdom); Thomas, Sarah [Floating Power Plant (Denmark); Heras, Pilar [Floating Power Plant (Denmark); Bingham, Harry [Technical University of Denmark (Denmark); Kurniawan, Adi [Aalborg University (Denmark); Kramer, Morten Mejlhede [Aalborg University (Denmark); Ogden, David [INNOSEA (France); Girardin, Samuel [INNOSEA (France); Babarit, Aurelien [EC Nantes (France); Wuillaume, Pierre-Yves [EC Nantes (France); Steinke, Dean [Dynamic Systems Analysis (Canada); Roy, Andre [Dynamic Systems Analysis (Canada); Beatty, Scott [Cascadia Coast Research (Canada); Schofield, Paul [ANSYS (United States); Kim, Kyong-Hwan [KRISO (Korea, Rep. of); Jansson, Johan [KTH Royal Inst. of Technology, Stockholm (Sweden); BCAM (Spain); Hoffman, Johan [KTH Royal Inst. of Technology, Stockholm (Sweden)

2017-10-16

This is the first joint reference paper for the Ocean Energy Systems (OES) Task 10 Wave Energy Converter modeling verification and validation group. The group is established under the OES Energy Technology Network program under the International Energy Agency. OES was founded in 2001 and Task 10 was proposed by Bob Thresher (National Renewable Energy Laboratory) in 2015 and approved by the OES Executive Committee EXCO in 2016. The kickoff workshop took place in September 2016, wherein the initial baseline task was defined. Experience from similar offshore wind validation/verification projects (OC3-OC5 conducted within the International Energy Agency Wind Task 30) [1], [2] showed that a simple test case would help the initial cooperation to present results in a comparable way. A heaving sphere was chosen as the first test case. The team of project participants simulated different numerical experiments, such as heave decay tests and regular and irregular wave cases. The simulation results are presented and discussed in this paper.

37 CFR 260.6 - Verification of royalty payments.

Science.gov (United States)

2010-07-01

... verification of the payment of royalty fees to those parties entitled to receive such fees, according to terms... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Verification of royalty... COPYRIGHT ARBITRATION ROYALTY PANEL RULES AND PROCEDURES RATES AND TERMS FOR PREEXISTING SUBSCRIPTION...

Advanced control and instrumentation systems in nuclear power plants. Design, verification and validation

International Nuclear Information System (INIS)

Haapanen, P.

1995-01-01

The Technical Committee Meeting on design, verification and validation of advanced control and instrumentation systems in nuclear power plants was held in Espoo, Finland on 20 - 23 June 1994. The meeting was organized by the International Atomic Energy Agency's (IAEA) International Working Group's (IWG) on Nuclear Power Plant Control and Instrumentation (NPPCI) and on Advanced Technologies for Water Cooled Reactors (ATWR). VTT Automation together with Imatran Voima Oy and Teollisuuden Voima Oy responded about the practical arrangements of the meeting. In total 96 participants from 21 countries and the Agency took part in the meeting and 34 full papers and 8 posters were presented. Following topics were covered in the papers: (1) experience with advanced and digital systems, (2) safety and reliability analysis, (3) advanced digital systems under development and implementation, (4) verification and validation methods and practices, (5) future development trends. (orig.)

Model-Based Design and Formal Verification Processes for Automated Waterway System Operations

Directory of Open Access Journals (Sweden)

Leonard Petnga

2016-06-01

Full Text Available Waterway and canal systems are particularly cost effective in the transport of bulk and containerized goods to support global trade. Yet, despite these benefits, they are among the most under-appreciated forms of transportation engineering systems. Looking ahead, the long-term view is not rosy. Failures, delays, incidents and accidents in aging waterway systems are doing little to attract the technical and economic assistance required for modernization and sustainability. In a step toward overcoming these challenges, this paper argues that programs for waterway and canal modernization and sustainability can benefit significantly from system thinking, supported by systems engineering techniques. We propose a multi-level multi-stage methodology for the model-based design, simulation and formal verification of automated waterway system operations. At the front-end of development, semi-formal modeling techniques are employed for the representation of project goals and scenarios, requirements and high-level models of behavior and structure. To assure the accuracy of engineering predictions and the correctness of operations, formal modeling techniques are used for the performance assessment and the formal verification of the correctness of functionality. The essential features of this methodology are highlighted in a case study examination of ship and lock-system behaviors in a two-stage lock system.

A Roadmap for the Implementation of Continued Process Verification.

Science.gov (United States)

Boyer, Marcus; Gampfer, Joerg; Zamamiri, Abdel; Payne, Robin

2016-01-01

In 2014, the members of the BioPhorum Operations Group (BPOG) produced a 100-page continued process verification case study, entitled "Continued Process Verification: An Industry Position Paper with Example Protocol". This case study captures the thought processes involved in creating a continued process verification plan for a new product in response to the U.S. Food and Drug Administration's guidance on the subject introduced in 2011. In so doing, it provided the specific example of a plan developed for a new molecular antibody product based on the "A MAb Case Study" that preceded it in 2009.This document provides a roadmap that draws on the content of the continued process verification case study to provide a step-by-step guide in a more accessible form, with reference to a process map of the product life cycle. It could be used as a basis for continued process verification implementation in a number of different scenarios: For a single product and process;For a single site;To assist in the sharing of data monitoring responsibilities among sites;To assist in establishing data monitoring agreements between a customer company and a contract manufacturing organization. The U.S. Food and Drug Administration issued guidance on the management of manufacturing processes designed to improve quality and control of drug products. This involved increased focus on regular monitoring of manufacturing processes, reporting of the results, and the taking of opportunities to improve. The guidance and practice associated with it is known as continued process verification This paper summarizes good practice in responding to continued process verification guidance, gathered from subject matter experts in the biopharmaceutical industry. © PDA, Inc. 2016.

Land surface Verification Toolkit (LVT)

Science.gov (United States)

Kumar, Sujay V.

2017-01-01

LVT is a framework developed to provide an automated, consolidated environment for systematic land surface model evaluation Includes support for a range of in-situ, remote-sensing and other model and reanalysis products. Supports the analysis of outputs from various LIS subsystems, including LIS-DA, LIS-OPT, LIS-UE. Note: The Land Information System Verification Toolkit (LVT) is a NASA software tool designed to enable the evaluation, analysis and comparison of outputs generated by the Land Information System (LIS). The LVT software is released under the terms and conditions of the NASA Open Source Agreement (NOSA) Version 1.1 or later. Land Information System Verification Toolkit (LVT) NOSA.

On Backward-Style Anonymity Verification

Science.gov (United States)

Kawabe, Yoshinobu; Mano, Ken; Sakurada, Hideki; Tsukada, Yasuyuki

Many Internet services and protocols should guarantee anonymity; for example, an electronic voting system should guarantee to prevent the disclosure of who voted for which candidate. To prove trace anonymity, which is an extension of the formulation of anonymity by Schneider and Sidiropoulos, this paper presents an inductive method based on backward anonymous simulations. We show that the existence of an image-finite backward anonymous simulation implies trace anonymity. We also demonstrate the anonymity verification of an e-voting protocol (the FOO protocol) with our backward anonymous simulation technique. When proving the trace anonymity, this paper employs a computer-assisted verification tool based on a theorem prover.

78 FR 27882 - VA Veteran-Owned Small Business (VOSB) Verification Guidelines

Science.gov (United States)

2013-05-13

... Verification Self-Assessment Tool that walks the veteran through the regulation and how it applies to the...) Verification Guidelines AGENCY: Department of Veterans Affairs. ACTION: Advanced notice of proposed rulemaking... regulations governing the Department of Veterans Affairs (VA) Veteran-Owned Small Business (VOSB) Verification...

Verification and validation for waste disposal models

International Nuclear Information System (INIS)

1987-07-01

A set of evaluation criteria has been developed to assess the suitability of current verification and validation techniques for waste disposal methods. A survey of current practices and techniques was undertaken and evaluated using these criteria with the items most relevant to waste disposal models being identified. Recommendations regarding the most suitable verification and validation practices for nuclear waste disposal modelling software have been made

Investigation of novel spent fuel verification system for safeguard application

Energy Technology Data Exchange (ETDEWEB)

Lee, Haneol; Yim, Man-Sung [KAIST, Daejeon (Korea, Republic of)

2016-10-15

Radioactive waste, especially spent fuel, is generated from the operation of nuclear power plants. The final stage of radioactive waste management is disposal which isolates radioactive waste from the accessible environment and allows it to decay. The safety, security, and safeguard of a spent fuel repository have to be evaluated before its operation. Many researchers have evaluated the safety of a repository. These researchers calculated dose to public after the repository is closed depending on their scenario. Because most spent fuel repositories are non-retrievable, research on security or safeguards of spent fuel repositories have to be performed. Design based security or safeguard have to be developed for future repository designs. This study summarizes the requirements of future spent fuel repositories especially safeguards, and suggests a novel system which meets the safeguard requirements. Applying safeguards to a spent fuel repository is becoming increasingly important. The future requirements for a spent fuel repository are suggested by several expert groups, such as ASTOR in IAEA. The requirements emphasizes surveillance and verification. The surveillance and verification of spent fuel is currently accomplished by using the Cerenkov radiation detector while spent fuel is being stored in a fuel pool. This research investigated an advanced spent fuel verification system using a system which converts spent fuel radiation into electricity. The system generates electricity while it is conveyed from a transportation cask to a disposal cask. The electricity conversion system was verified in a lab scale experiment using an 8.51GBq Cs-137 gamma source.

Investigation of novel spent fuel verification system for safeguard application

International Nuclear Information System (INIS)

Lee, Haneol; Yim, Man-Sung

2016-01-01

Radioactive waste, especially spent fuel, is generated from the operation of nuclear power plants. The final stage of radioactive waste management is disposal which isolates radioactive waste from the accessible environment and allows it to decay. The safety, security, and safeguard of a spent fuel repository have to be evaluated before its operation. Many researchers have evaluated the safety of a repository. These researchers calculated dose to public after the repository is closed depending on their scenario. Because most spent fuel repositories are non-retrievable, research on security or safeguards of spent fuel repositories have to be performed. Design based security or safeguard have to be developed for future repository designs. This study summarizes the requirements of future spent fuel repositories especially safeguards, and suggests a novel system which meets the safeguard requirements. Applying safeguards to a spent fuel repository is becoming increasingly important. The future requirements for a spent fuel repository are suggested by several expert groups, such as ASTOR in IAEA. The requirements emphasizes surveillance and verification. The surveillance and verification of spent fuel is currently accomplished by using the Cerenkov radiation detector while spent fuel is being stored in a fuel pool. This research investigated an advanced spent fuel verification system using a system which converts spent fuel radiation into electricity. The system generates electricity while it is conveyed from a transportation cask to a disposal cask. The electricity conversion system was verified in a lab scale experiment using an 8.51GBq Cs-137 gamma source

The effect of perceived regional accents on individual economic behavior: a lab experiment on linguistic performance, cognitive ratings and economic decisions.

Directory of Open Access Journals (Sweden)

Stephan Heblich

Full Text Available Does it matter if you speak with a regional accent? Speaking immediately reveals something of one's own social and cultural identity, be it consciously or unconsciously. Perceiving accents involves not only reconstructing such imprints but also augmenting them with particular attitudes and stereotypes. Even though we know much about attitudes and stereotypes that are transmitted by, e.g. skin color, names or physical attractiveness, we do not yet have satisfactory answers how accent perception affects human behavior. How do people act in economically relevant contexts when they are confronted with regional accents? This paper reports a laboratory experiment where we address this question. Participants in our experiment conduct cognitive tests where they can choose to either cooperate or compete with a randomly matched male opponent identified only via his rendering of a standardized text in either a regional accent or standard accent. We find a strong connection between the linguistic performance and the cognitive rating of the opponent. When matched with an opponent who speaks the accent of the participant's home region--the in-group opponent--, individuals tend to cooperate significantly more often. By contrast, they are more likely to compete when matched with an accent speaker from outside their home region, the out-group opponent. Our findings demonstrate, firstly, that the perception of an out-group accent leads not only to social discrimination but also influences economic decisions. Secondly, they suggest that this economic behavior is not necessarily attributable to the perception of a regional accent per se, but rather to the social rating of linguistic distance and the in-group/out-group perception it evokes.

Health economics and health policy: experiences from New Zealand.

Science.gov (United States)

Cumming, Jacqueline

2015-06-01

Health economics has had a significant impact on the New Zealand health system over the past 30 years. In this paper, I set out a framework for thinking about health economics, give some historical background to New Zealand and the New Zealand health system, and discuss examples of how health economics has influenced thinking about the organisation of the health sector and priority setting. I conclude the paper with overall observations about the role of health economics in health policy in New Zealand, also identifying where health economics has not made the contribution it could and where further influence might be beneficial.

Minimum Wages and Workers' "Motivation": An approach using an economic experiment (Japanese)

OpenAIRE

MORI Tomoharu

2013-01-01

This paper investigates the effect of minimum wages on workers' effort levels (motivation) using an economic experiment conducted in a laboratory. Under the gift-exchange theory, if firms pay higher wages, workers exert more effort. Vice versa, if firms pay lower wages, workers exert less effort. Minimum wages affect the judgment as to whether the wages being paid are high or low. In general, wages near the minimum appear unattractive. However, it is possible that the same level of wage will ...

Property-driven functional verification technique for high-speed vision system-on-chip processor

Science.gov (United States)

Nshunguyimfura, Victor; Yang, Jie; Liu, Liyuan; Wu, Nanjian

2017-04-01

The implementation of functional verification in a fast, reliable, and effective manner is a challenging task in a vision chip verification process. The main reason for this challenge is the stepwise nature of existing functional verification techniques. This vision chip verification complexity is also related to the fact that in most vision chip design cycles, extensive efforts are focused on how to optimize chip metrics such as performance, power, and area. Design functional verification is not explicitly considered at an earlier stage at which the most sound decisions are made. In this paper, we propose a semi-automatic property-driven verification technique. The implementation of all verification components is based on design properties. We introduce a low-dimension property space between the specification space and the implementation space. The aim of this technique is to speed up the verification process for high-performance parallel processing vision chips. Our experimentation results show that the proposed technique can effectively improve the verification effort up to 20% for the complex vision chip design while reducing the simulation and debugging overheads.

Verification test report on a solar heating and hot water system

Science.gov (United States)

1978-01-01

Information is provided on the development, qualification and acceptance verification of commercial solar heating and hot water systems and components. The verification includes the performances, the efficiences and the various methods used, such as similarity, analysis, inspection, test, etc., that are applicable to satisfying the verification requirements.

Temporal Specification and Verification of Real-Time Systems.

Science.gov (United States)

1991-08-30

of concrete real - time systems can be modeled adequately. Specification: We present two conservative extensions of temporal logic that allow for the...logic. We present both model-checking algorithms for the automatic verification of finite-state real - time systems and proof methods for the deductive verification of real - time systems .

Using Economic Incentives to Reduce Electricity Consumption: A field Experiment in Matsuyama, Japan

OpenAIRE

Kenichi Mizobuchi; Kenji Takeuchi

2012-01-01

This study examines the effectiveness of economic incentives in promoting electricity-conservation behavior among Japanese households. Fifty-three Japanese households participated in a field experiment and were offered monetary rewards depending on their rate of reduction in electricity consumption. To avoid bias in sample selection, which is typically present in previous studies, we adopted a request-based approach for recruiting participants. Results showed that only 34% of the participants...

A verification regime for the spatial discretization of the SN transport equations

Energy Technology Data Exchange (ETDEWEB)

Schunert, S.; Azmy, Y. [North Carolina State Univ., Dept. of Nuclear Engineering, 2500 Stinson Drive, Raleigh, NC 27695 (United States)

2012-07-01

The order-of-accuracy test in conjunction with the method of manufactured solutions is the current state of the art in computer code verification. In this work we investigate the application of a verification procedure including the order-of-accuracy test on a generic SN transport solver that implements the AHOTN spatial discretization. Different types of semantic errors, e.g. removal of a line of code or changing a single character, are introduced randomly into the previously verified S{sub N} code and the proposed verification procedure is used to identify the coding mistakes (if possible) and classify them. Itemized by error type we record the stage of the verification procedure where the error is detected and report the frequency with which the errors are correctly identified at various stages of the verification. Errors that remain undetected by the verification procedure are further scrutinized to determine the reason why the introduced coding mistake eluded the verification procedure. The result of this work is that the verification procedure based on an order-of-accuracy test finds almost all detectable coding mistakes but rarely, 1.44% of the time, and under certain circumstances can fail. (authors)

Intercomparison of liquid metal fast reactor seismic analysis codes. V. 2: Verification and improvement of reactor core seismic analysis codes using core mock-up experiments. Proceedings of a research co-ordination meeting held in Vienna, 26-28 September 1994

International Nuclear Information System (INIS)

1995-10-01

This report (Volume II) contains the papers summarizing the verification of and improvement to the codes on the basis of the French and Japanese data. Volume I: ''Validation of the Seismic Analysis Codes Using the Reactor Code Experiments'' (IAEA-TECDOC-798) included the Italian PEC reactor data. Refs, figs and tabs

Intercomparison of liquid metal fast reactor seismic analysis codes. V. 2: Verification and improvement of reactor core seismic analysis codes using core mock-up experiments. Proceedings of a research co-ordination meeting held in Vienna, 26-28 September 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

This report (Volume II) contains the papers summarizing the verification of and improvement to the codes on the basis of the French and Japanese data. Volume I: ``Validation of the Seismic Analysis Codes Using the Reactor Code Experiments`` (IAEA-TECDOC-798) included the Italian PEC reactor data. Refs, figs and tabs.

Hydraulic experiment on formation mechanism of tsunami deposit and verification of sediment transport model for tsunamis

Science.gov (United States)

Yamamoto, A.; Takahashi, T.; Harada, K.; Sakuraba, M.; Nojima, K.

2017-12-01

observation of velocity in Kesennnuma bay had a low accuracy. On the other hand, this hydraulic experiment measured accurate velocity and sand deposition distribution of various condition. Based on these data, we tried more accurate verification of the model of Takahashi et al. (1999).

Environmental technology verification methods

CSIR Research Space (South Africa)

Szewczuk, S

2016-03-01

Full Text Available Environmental Technology Verification (ETV) is a tool that has been developed in the United States of America, Europe and many other countries around the world to help innovative environmental technologies reach the market. Claims about...

Cubic Bezier Curve Approach for Automated Offline Signature Verification with Intrusion Identification

Directory of Open Access Journals (Sweden)

Arun Vijayaragavan

2014-01-01

Full Text Available Authentication is a process of identifying person’s rights over a system. Many authentication types are used in various systems, wherein biometrics authentication systems are of a special concern. Signature verification is a basic biometric authentication technique used widely. The signature matching algorithm uses image correlation and graph matching technique which provides false rejection or acceptance. We proposed a model to compare knowledge from signature. Intrusion in the signature repository system results in copy of the signature that leads to false acceptance. Our approach uses a Bezier curve algorithm to identify the curve points and uses the behaviors of the signature for verification. An analyzing mobile agent is used to identify the input signature parameters and compare them with reference signature repository. It identifies duplication of signature over intrusion and rejects it. Experiments are conducted on a database with thousands of signature images from various sources and the results are favorable.

Formal Modeling and Verification of Interlocking Systems Featuring Sequential Release

DEFF Research Database (Denmark)

Vu, Linh Hong; Haxthausen, Anne Elisabeth; Peleska, Jan

2015-01-01

In this paper, we present a method and an associated tool suite for formal verification of the new ETCS level 2 based Danish railway interlocking systems. We have made a generic and reconfigurable model of the system behavior and generic high-level safety properties. This model accommodates seque...... SMT based bounded model checking (BMC) and inductive reasoning, we are able to verify the properties for model instances corresponding to railway networks of industrial size. Experiments also show that BMC is efficient for finding bugs in the railway interlocking designs....

Formal Modeling and Verification of Interlocking Systems Featuring Sequential Release

DEFF Research Database (Denmark)

Vu, Linh Hong; Haxthausen, Anne Elisabeth; Peleska, Jan

2014-01-01

In this paper, we present a method and an associated tool suite for formal verification of the new ETCS level 2 based Danish railway interlocking systems. We have made a generic and reconfigurable model of the system behavior and generic high-level safety properties. This model accommodates seque...... SMT based bounded model checking (BMC) and inductive reasoning, we are able to verify the properties for model instances corresponding to railway networks of industrial size. Experiments also show that BMC is efficient for finding bugs in the railway interlocking designs....

Verification and Optimization of a PLC Control Schedule

NARCIS (Netherlands)

Brinksma, Hendrik; Mader, Angelika H.; Havelund, K.; Penix, J.; Visser, W.

We report on the use of the SPIN model checker for both the verification of a process control program and the derivation of optimal control schedules. This work was carried out as part of a case study for the EC VHS project (Verification of Hybrid Systems), in which the program for a Programmable

Compressive sensing using optimized sensing matrix for face verification

Science.gov (United States)

Oey, Endra; Jeffry; Wongso, Kelvin; Tommy

2017-12-01

Biometric appears as one of the solutions which is capable in solving problems that occurred in the usage of password in terms of data access, for example there is possibility in forgetting password and hard to recall various different passwords. With biometrics, physical characteristics of a person can be captured and used in the identification process. In this research, facial biometric is used in the verification process to determine whether the user has the authority to access the data or not. Facial biometric is chosen as its low cost implementation and generate quite accurate result for user identification. Face verification system which is adopted in this research is Compressive Sensing (CS) technique, in which aims to reduce dimension size as well as encrypt data in form of facial test image where the image is represented in sparse signals. Encrypted data can be reconstructed using Sparse Coding algorithm. Two types of Sparse Coding namely Orthogonal Matching Pursuit (OMP) and Iteratively Reweighted Least Squares -ℓp (IRLS-ℓp) will be used for comparison face verification system research. Reconstruction results of sparse signals are then used to find Euclidean norm with the sparse signal of user that has been previously saved in system to determine the validity of the facial test image. Results of system accuracy obtained in this research are 99% in IRLS with time response of face verification for 4.917 seconds and 96.33% in OMP with time response of face verification for 0.4046 seconds with non-optimized sensing matrix, while 99% in IRLS with time response of face verification for 13.4791 seconds and 98.33% for OMP with time response of face verification for 3.1571 seconds with optimized sensing matrix.

340 and 310 drawing field verification

International Nuclear Information System (INIS)

Langdon, J.

1996-01-01

The purpose of the drawing field verification work plan is to provide reliable drawings for the 310 Treated Effluent Disposal Facility (TEDF) and 340 Waste Handling Facility (340 Facility). The initial scope of this work plan is to provide field verified and updated versions of all the 340 Facility essential drawings. This plan can also be used for field verification of any other drawings that the facility management directs to be so updated. Any drawings revised by this work plan will be issued in an AutoCAD format

Verification of Scientific Simulations via Hypothesis-Driven Comparative and Quantitative Visualization

Energy Technology Data Exchange (ETDEWEB)

Ahrens, James P [ORNL; Heitmann, Katrin [ORNL; Petersen, Mark R [ORNL; Woodring, Jonathan [Los Alamos National Laboratory (LANL); Williams, Sean [Los Alamos National Laboratory (LANL); Fasel, Patricia [Los Alamos National Laboratory (LANL); Ahrens, Christine [Los Alamos National Laboratory (LANL); Hsu, Chung-Hsing [ORNL; Geveci, Berk [ORNL

2010-11-01

This article presents a visualization-assisted process that verifies scientific-simulation codes. Code verification is necessary because scientists require accurate predictions to interpret data confidently. This verification process integrates iterative hypothesis verification with comparative, feature, and quantitative visualization. Following this process can help identify differences in cosmological and oceanographic simulations.

Joint experiment on verification of the treaty on the limitation of underground nuclear tests and its value in nuclear disarmament problem

International Nuclear Information System (INIS)

Mikhailov, V.N.

1998-01-01

This conference commemorates the 10th anniversary of the Joint Verification Experiment. The experiment was performed in order to specify methods controlling yield of underground explosions in the USA and the USSR. Basic of the the experiment were coordinated and formulated in the Agreement signed by Heads of departments of foreign policies in Moscow on 31 May 1988. The tasks can be briefly revealed the following way: - each of the parties can measure (on mutual basis) the explosion yield in the course of the experiment performed on the test site of the other party using tele seismic and hydrodynamic methods; - each party also makes tele seismic measurement of both explosions of the experiment with the help of its national net of seismic stations; - each party makes hydrodynamic measurements of explosion yield in the course of the experiment in a special additional borehole; - each party performs tele-seismic measurements of both explosions' yield at its five seismic stations with which the parties exchanged data on the explosions made earlier. In the course of the experiment the parties exchanged the data obtained in the same volume. The analysis showed: 1. The experiment conformed to all the requirements of the Agreement in spite of all the complexity of the procedures and differences in conditions of the experiment performance. 2. The experiment became an example of an unprecedented level of cooperation between two countries in one of the most significant for national security fields of defense activity. 3. The experiment gave the basis for concrete coordination of underground test yield control measures. It also considerable advanced the elaboration of protocols to treaties of 1974 and 1976. 4. In the course of the experiment there appeared an opportunity to compare scientific-technical level of hydrodynamic and seismic measurements and safety provision for nuclear tests of both countries. Cooperative development of anti intrusive devices for hydrodynamic method

The State Supervision (Control in the Sphere of Economic Activity: International Experience Relevant for Ukraine

Directory of Open Access Journals (Sweden)

Vdovychenko Larysa Yu.

2018-01-01

Full Text Available The attempts in the process of decentralization in Ukraine to implement the best international practices of the State supervision (control in the sphere of economic activity, in the process which depends on the status of deregulation and development of entrepreneurship, have caused the topicality of the problem set. The article is aimed at analyzing the international experience of application of the State supervision (control instruments in the sphere of economic activity and determination of the directions of their use in Ukraine. The stages of reforms of the control and supervision activity both in foreign countries and in Ukraine were considered. The directions and measures on creation of effective system of the State supervision (control in the sphere of economic activity, applied in the world countries, were systematized. Both the positive and the negative aspects of use of foreign instruments of the State supervision (control in the sphere of economic activity in Ukraine have been defined. Recommendations on formation of the national complex system of functioning of control-supervision activity have been given.

Formal verification of Simulink/Stateflow diagrams a deductive approach

CERN Document Server

Zhan, Naijun; Zhao, Hengjun

2017-01-01

This book presents a state-of-the-art technique for formal verification of continuous-time Simulink/Stateflow diagrams, featuring an expressive hybrid system modelling language, a powerful specification logic and deduction-based verification approach, and some impressive, realistic case studies. Readers will learn the HCSP/HHL-based deductive method and the use of corresponding tools for formal verification of Simulink/Stateflow diagrams. They will also gain some basic ideas about fundamental elements of formal methods such as formal syntax and semantics, and especially the common techniques applied in formal modelling and verification of hybrid systems. By investigating the successful case studies, readers will realize how to apply the pure theory and techniques to real applications, and hopefully will be inspired to start to use the proposed approach, or even develop their own formal methods in their future work.

Proceedings of the Joint IAEA/CSNI Specialists' Meeting on Fracture Mechanics Verification by Large-Scale Testing

International Nuclear Information System (INIS)

1993-10-01

This report provides the proceedings of a Specialists' Meeting on Fracture Mechanics Verification by Large-Scale Testing that was held in Oak Ridge, Tennessee, on October 23-25, 1992. The meeting was jointly sponsored by the International Atomic Energy Agency (IAEA) and the Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development. In particular, the International Working Group (IWG) on Life Management of Nuclear Power Plants (LMNPP) was the IAEA sponsor, and the Principal Working Group 3 (PWG-3) (Primary System Component Integrity) of the Committee for the Safety of Nuclear Installations (CSNI) was the NEA's sponsor. This meeting was preceded by two prior international activities that were designed to examine the state-of-the-art in fracture analysis capabilities and emphasized applications to the safety evaluation of nuclear power facilities. The first of those two activities was an IAEA Specialists' Meeting on Fracture Mechanics Verification by Large-Scale Testing that was held at the Staatliche Materialprufungsanstalt (MPA) in Stuttgart, Germany, on May 25-27, 1988; the proceedings of that meeting were published 1991.1 The second activity was the CSNI/PWG-3's Fracture Assessment Group's Project FALSIRE (Fracture Analyses of Large-Scale International Reference Experiments). The proceedings of the FALSIRE workshop that was held in Boston, Massachusetts, U.S.A., on May 8-10, 1990, was recently published by the Oak Ridge National Laboratory (ORNL). Those previous activities identified capabilities and shortcomings of various fracture analysis methods based on analyses of six available large-scale experiments. Different modes of fracture behavior, which ranged from brittle to ductile, were considered. In addition, geometry, size, constraint and multiaxial effects were considered. While generally good predictive capabilities were demonstrated for brittle fracture, issues were identified relative to predicting fracture behavior at higher

Fuzzy Verification of Lower Dimensional Information in a Numerical Simulation of Sea Ice

Science.gov (United States)

Sulsky, D.; Levy, G.

2010-12-01

Ideally, a verification and validation scheme should be able to evaluate and incorporate lower dimensional features (e.g., discontinuities) contained within a bulk simulation even when not directly observed or represented by model variables. Nonetheless, lower dimensional features are often ignored. Conversely, models that resolve such features and the associated physics well, yet imprecisely are penalized by traditional validation schemes. This can lead to (perceived or real) poor model performance and predictability and can become deleterious in model improvements when observations are sparse, fuzzy, or irregular. We present novel algorithms and a general framework for using information from available satellite data through fuzzy verification that efficiently and effectively remedy the known problems mentioned above. As a proof of concept, we use a sea-ice model with remotely sensed observations of leads in a one-step initialization cycle. Using the new scheme in a sixteen day simulation experiment introduces model skill (against persistence) several days earlier than in the control run, improves the overall model skill and delays its drop off at later stages of the simulation. Although sea-ice models are currently a weak link in climate models, the appropriate choice of data to use, and the fuzzy verification and evaluation of a system’s skill in reproducing lower dimensional features are important beyond the initial application to sea ice. Our strategy and framework for fuzzy verification, selective use of information, and feature extraction could be extended globally and to other disciplines. It can be incorporated in and complement existing verification and validation schemes, increasing their computational efficiency and the information they use. It can be used for model development and improvements, upscaling/downscaling models, and for modeling processes not directly represented by model variables or direct observations. Finally, if successful, it can

Online pretreatment verification of high-dose rate brachytherapy using an imaging panel

Science.gov (United States)

Fonseca, Gabriel P.; Podesta, Mark; Bellezzo, Murillo; Van den Bosch, Michiel R.; Lutgens, Ludy; Vanneste, Ben G. L.; Voncken, Robert; Van Limbergen, Evert J.; Reniers, Brigitte; Verhaegen, Frank

2017-07-01

Brachytherapy is employed to treat a wide variety of cancers. However, an accurate treatment verification method is currently not available. This study describes a pre-treatment verification system that uses an imaging panel (IP) to verify important aspects of the treatment plan. A detailed modelling of the IP was only possible with an extensive calibration performed using a robotic arm. Irradiations were performed with a high dose rate (HDR) 192Ir source within a water phantom. An empirical fit was applied to measure the distance between the source and the detector so 3D Cartesian coordinates of the dwell positions can be obtained using a single panel. The IP acquires 7.14 fps to verify the dwell times, dwell positions and air kerma strength (Sk). A gynecological applicator was used to create a treatment plan that was registered with a CT image of the water phantom used during the experiments for verification purposes. Errors (shifts, exchanged connections and wrong dwell times) were simulated to verify the proposed verification system. Cartesian source positions (panel measurement plane) have a standard deviation of about 0.02 cm. The measured distance between the source and the panel (z-coordinate) have a standard deviation up to 0.16 cm and maximum absolute error of  ≈0.6 cm if the signal is close to sensitive limit of the panel. The average response of the panel is very linear with Sk. Therefore, Sk measurements can be performed with relatively small errors. The measured dwell times show a maximum error of 0.2 s which is consistent with the acquisition rate of the panel. All simulated errors were clearly identified by the proposed system. The use of IPs is not common in brachytherapy, however, it provides considerable advantages. It was demonstrated that the IP can accurately measure Sk, dwell times and dwell positions.

GCFR thermal-hydraulic experiments

International Nuclear Information System (INIS)

Schlueter, G.; Baxi, C.B.; Dalle Donne, M.; Gat, U.; Fenech, H.; Hanson, D.; Hudina, M.

1980-01-01

The thermal-hydraulic experimental studies performed and planned for the Gas-Cooled Fast Reactor (GCFR) core assemblies are described. The experiments consist of basic studies performed to obtain correlations, and bundle experiments which provide input for code validation and design verification. These studies have been performed and are planned at European laboratories, US national laboratories, Universities in the US, and at General Atomic Company

Ontology Matching with Semantic Verification.

Science.gov (United States)

Jean-Mary, Yves R; Shironoshita, E Patrick; Kabuka, Mansur R

2009-09-01

ASMOV (Automated Semantic Matching of Ontologies with Verification) is a novel algorithm that uses lexical and structural characteristics of two ontologies to iteratively calculate a similarity measure between them, derives an alignment, and then verifies it to ensure that it does not contain semantic inconsistencies. In this paper, we describe the ASMOV algorithm, and then present experimental results that measure its accuracy using the OAEI 2008 tests, and that evaluate its use with two different thesauri: WordNet, and the Unified Medical Language System (UMLS). These results show the increased accuracy obtained by combining lexical, structural and extensional matchers with semantic verification, and demonstrate the advantage of using a domain-specific thesaurus for the alignment of specialized ontologies.

Interpolant tree automata and their application in Horn clause verification

DEFF Research Database (Denmark)

Kafle, Bishoksan; Gallagher, John Patrick

2016-01-01

This paper investigates the combination of abstract interpretation over the domain of convex polyhedra with interpolant tree automata, in an abstraction-refinement scheme for Horn clause verification. These techniques have been previously applied separately, but are combined in a new way in this ......This paper investigates the combination of abstract interpretation over the domain of convex polyhedra with interpolant tree automata, in an abstraction-refinement scheme for Horn clause verification. These techniques have been previously applied separately, but are combined in a new way...... clause verification problems indicates that the combination of interpolant tree automaton with abstract interpretation gives some increase in the power of the verification tool, while sometimes incurring a performance overhead....

Synergies across verification regimes: Nuclear safeguards and chemical weapons convention compliance

International Nuclear Information System (INIS)

Kadner, Steven P.; Turpen, Elizabeth

2001-01-01

In the implementation of all arms control agreements, accurate verification is essential. In setting a course for verifying compliance with a given treaty - whether the NPT or the CWC, one must make a technical comparison of existing information-gathering capabilities against the constraints in an agreement. Then it must be decided whether this level of verifiability is good enough. Generally, the policy standard of 'effective verification' includes the ability to detect significant violations, with high confidence, in sufficient time to respond effectively with policy adjustments or other responses, as needed. It is at this juncture where verification approaches have traditionally diverged. Nuclear safeguards requirements have taken one path while chemical verification methods have pursued another. However, recent technological advances have brought a number of changes affecting verification, and lately their pace has been accelerating. First, all verification regimes have more and better information as a result of new kinds of sensors, imagery, and other technologies. Second, the verification provisions in agreements have also advanced, to include on-site inspections, portal monitoring, data exchanges, and a variety of transparency, confidence-building, and other cooperative measures, Together these developments translate into a technological overlap of certain institutional verification measures such as the NPT's safeguards requirements and the IAEA and the CWC's verification visions and the OPCW. Hence, a priority of international treaty-implementing organizations is exploring the development of a synergistic and coordinated approach to WMD policy making that takes into account existing inter-linkages between nuclear, chemical, and biological weapons issues. Specific areas of coordination include harmonizing information systems and information exchanges and the shared application of scientific mechanisms, as well as collaboration on technological developments

Ethiopian Journal of Economics

African Journals Online (AJOL)

The Ethiopian Economic Journal of Economics is a publication of the Ethiopian Economic Association. It is a bi annual publication devoted to the advancement of economics as a scientific discipline in Ethiopia. However, contributions of articles by non-Ethiopian and on economic experience of other countries are ...

A Correctness Verification Technique for Commercial FPGA Synthesis Tools

International Nuclear Information System (INIS)

Kim, Eui Sub; Yoo, Jun Beom; Choi, Jong Gyun; Kim, Jang Yeol; Lee, Jang Soo

2014-01-01

Once the FPGA (Filed-Programmable Gate Array) designers designs Verilog programs, the commercial synthesis tools automatically translate the Verilog programs into EDIF programs so that the designers can have largely focused on HDL designs for correctness of functionality. Nuclear regulation authorities, however, require more considerate demonstration of the correctness and safety of mechanical synthesis processes of FPGA synthesis tools, even if the FPGA industry have acknowledged them empirically as correct and safe processes and tools. In order to assure of the safety, the industry standards for the safety of electronic/electrical devices, such as IEC 61508 and IEC 60880, recommend using the formal verification technique. There are several formal verification tools (i.e., 'FormalPro' 'Conformal' 'Formality' and so on) to verify the correctness of translation from Verilog into EDIF programs, but it is too expensive to use and hard to apply them to the works of 3rd-party developers. This paper proposes a formal verification technique which can contribute to the correctness demonstration in part. It formally checks the behavioral equivalence between Verilog and subsequently synthesized Net list with the VIS verification system. A Net list is an intermediate output of FPGA synthesis process, and EDIF is used as a standard format of Net lists. If the formal verification succeeds, then we can assure that the synthesis process from Verilog into Net list worked correctly at least for the Verilog used. In order to support the formal verification, we developed the mechanical translator 'EDIFtoBLIFMV,' which translates EDIF into BLIF-MV as an input front-end of VIS system, while preserving their behavior equivalence.. We performed the case study with an example of a preliminary version of RPS in a Korean nuclear power plant in order to provide the efficiency of the proposed formal verification technique and implemented translator. It

A Correctness Verification Technique for Commercial FPGA Synthesis Tools

Energy Technology Data Exchange (ETDEWEB)

Kim, Eui Sub; Yoo, Jun Beom [Konkuk University, Seoul (Korea, Republic of); Choi, Jong Gyun; Kim, Jang Yeol; Lee, Jang Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

Once the FPGA (Filed-Programmable Gate Array) designers designs Verilog programs, the commercial synthesis tools automatically translate the Verilog programs into EDIF programs so that the designers can have largely focused on HDL designs for correctness of functionality. Nuclear regulation authorities, however, require more considerate demonstration of the correctness and safety of mechanical synthesis processes of FPGA synthesis tools, even if the FPGA industry have acknowledged them empirically as correct and safe processes and tools. In order to assure of the safety, the industry standards for the safety of electronic/electrical devices, such as IEC 61508 and IEC 60880, recommend using the formal verification technique. There are several formal verification tools (i.e., 'FormalPro' 'Conformal' 'Formality' and so on) to verify the correctness of translation from Verilog into EDIF programs, but it is too expensive to use and hard to apply them to the works of 3rd-party developers. This paper proposes a formal verification technique which can contribute to the correctness demonstration in part. It formally checks the behavioral equivalence between Verilog and subsequently synthesized Net list with the VIS verification system. A Net list is an intermediate output of FPGA synthesis process, and EDIF is used as a standard format of Net lists. If the formal verification succeeds, then we can assure that the synthesis process from Verilog into Net list worked correctly at least for the Verilog used. In order to support the formal verification, we developed the mechanical translator 'EDIFtoBLIFMV,' which translates EDIF into BLIF-MV as an input front-end of VIS system, while preserving their behavior equivalence.. We performed the case study with an example of a preliminary version of RPS in a Korean nuclear power plant in order to provide the efficiency of the proposed formal verification technique and implemented translator. It

Logic verification system for power plant sequence diagrams

International Nuclear Information System (INIS)

Fukuda, Mitsuko; Yamada, Naoyuki; Teshima, Toshiaki; Kan, Ken-ichi; Utsunomiya, Mitsugu.

1994-01-01

A logic verification system for sequence diagrams of power plants has been developed. The system's main function is to verify correctness of the logic realized by sequence diagrams for power plant control systems. The verification is based on a symbolic comparison of the logic of the sequence diagrams with the logic of the corresponding IBDs (interlock Block Diagrams) in combination with reference to design knowledge. The developed system points out the sub-circuit which is responsible for any existing mismatches between the IBD logic and the logic realized by the sequence diagrams. Applications to the verification of actual sequence diagrams of power plants confirmed that the developed system is practical and effective. (author)

Formal verification of complex properties on PLC programs

CERN Document Server

Darvas, D; Voros, A; Bartha, T; Blanco Vinuela, E; Gonzalez Suarez, V M

2014-01-01

Formal verification has become a recommended practice in the safety-critical application areas. However, due to the complexity of practical control and safety systems, the state space explosion often prevents the use of formal analysis. In this paper we extend our former verification methodology with effective property preserving reduction techniques. For this purpose we developed general rule-based reductions and a customized version of the Cone of Influence (COI) reduction. Using these methods, the verification of complex requirements formalised with temporal logics (e.g. CTL, LTL) can be orders of magnitude faster. We use the NuSMV model checker on a real-life PLC program from CERN to demonstrate the performance of our reduction techniques.

Implementation and verification of global optimization benchmark problems

Science.gov (United States)

Posypkin, Mikhail; Usov, Alexander

2017-12-01

The paper considers the implementation and verification of a test suite containing 150 benchmarks for global deterministic box-constrained optimization. A C++ library for describing standard mathematical expressions was developed for this purpose. The library automate the process of generating the value of a function and its' gradient at a given point and the interval estimates of a function and its' gradient on a given box using a single description. Based on this functionality, we have developed a collection of tests for an automatic verification of the proposed benchmarks. The verification has shown that literary sources contain mistakes in the benchmarks description. The library and the test suite are available for download and can be used freely.

Development of nuclear thermal hydraulic verification test and evaluation technology - Development of fundamental technique for experiment of natural circulation phenomena in PWR systems

Energy Technology Data Exchange (ETDEWEB)

Park, Goon Cherl; Lee, Tae Ho; Kim, Moon Oh; Kim, Hak Joon [Seoul National University, Seoul (Korea)

2000-04-01

The dimensional analysis applied two-fluid model of CFX-4,2 were performed. For verification of analysis results, experimental measurement data of two-phase flow parameters in subcooled boiling flow were produced for vertical(0 deg) and inclination (60 deg). And through comparison analysis and experiments the application possibility of various two -phase flow models and the analysis ability of code were evaluated. Measurement technique of bubble velocity in two-phase flow using backscattering standard LDV was investigated from slug to bubbly flow regime. The range of velocity measured is from 0.2 to 1.5 m/s and that of bubble size is from 2 to 20 mm. For local temperature of boiling flow measurement, microthermocouple were manufactured and local liquid and vapor temperatures were measured in pool boiling and boiling flow. 66 refs., 74 figs., 4 tabs. (Author)

Projected Impact of Compositional Verification on Current and Future Aviation Safety Risk

Science.gov (United States)

Reveley, Mary S.; Withrow, Colleen A.; Leone, Karen M.; Jones, Sharon M.

2014-01-01

The projected impact of compositional verification research conducted by the National Aeronautic and Space Administration System-Wide Safety and Assurance Technologies on aviation safety risk was assessed. Software and compositional verification was described. Traditional verification techniques have two major problems: testing at the prototype stage where error discovery can be quite costly and the inability to test for all potential interactions leaving some errors undetected until used by the end user. Increasingly complex and nondeterministic aviation systems are becoming too large for these tools to check and verify. Compositional verification is a "divide and conquer" solution to addressing increasingly larger and more complex systems. A review of compositional verification research being conducted by academia, industry, and Government agencies is provided. Forty-four aviation safety risks in the Biennial NextGen Safety Issues Survey were identified that could be impacted by compositional verification and grouped into five categories: automation design; system complexity; software, flight control, or equipment failure or malfunction; new technology or operations; and verification and validation. One capability, 1 research action, 5 operational improvements, and 13 enablers within the Federal Aviation Administration Joint Planning and Development Office Integrated Work Plan that could be addressed by compositional verification were identified.

Randomized Controlled Trial of Teaching Methods: Do Classroom Experiments Improve Economic Education in High Schools?

Science.gov (United States)

Eisenkopf, Gerald; Sulser, Pascal A.

2016-01-01

The authors present results from a comprehensive field experiment at Swiss high schools in which they compare the effectiveness of teaching methods in economics. They randomly assigned classes into an experimental and a conventional teaching group, or a control group that received no specific instruction. Both teaching treatments improve economic…

The Effects of Remedial Mathematics on the Learning of Economics: Evidence from a Natural Experiment

Science.gov (United States)

Lagerlof, Johan N. M.; Seltzer, Andrew J.

2009-01-01

The authors examined the effects of remedial mathematics on performance in university-level economics courses using a natural experiment. They studied exam results prior and subsequent to the implementation of a remedial mathematics course that was compulsory for a subset of students and unavailable for the others, controlling for background…

Towards automatic verification of ladder logic programs

OpenAIRE

Zoubek , Bohumir; Roussel , Jean-Marc; Kwiatkowska , Martha

2003-01-01

International audience; Control system programs are usually validated by testing prior to their deployment. Unfortunately, testing is not exhaustive and therefore it is possible that a program which passed all the required tests still contains errors. In this paper we apply techniques of automatic verification to a control program written in ladder logic. A model is constructed mechanically from the ladder logic program and subjected to automatic verification against requirements that include...

Inventory verification measurements using neutron multiplicity counting

International Nuclear Information System (INIS)

Ensslin, N.; Foster, L.A.; Harker, W.C.; Krick, M.S.; Langner, D.G.

1998-01-01

This paper describes a series of neutron multiplicity measurements of large plutonium samples at the Los Alamos Plutonium Facility. The measurements were corrected for bias caused by neutron energy spectrum shifts and nonuniform multiplication, and are compared with calorimetry/isotopics. The results show that multiplicity counting can increase measurement throughput and yield good verification results for some inventory categories. The authors provide recommendations on the future application of the technique to inventory verification

Implementation Practices of Finland in Facilitating IAEA Verification Activities

International Nuclear Information System (INIS)

Martikka, E.; Ansaranta, T.; Honkamaa, T.; Hamalainen, M.

2015-01-01

The Member States provide the information to the IAEA according to the Safeguards Agreements and Additional Protocols. For example, the requirements to provide the reports and declarations are very general and there are no explanation what the IAEA is looking for from that information. It is important for the States to understand how their efforts to collect and provide information, and to facilitate IAEA verification activities, contribute to the achievement of objectives and finally to draw conclusions on the exclusively peaceful use of nuclear materials in a State. The IAEA is producing a new series of guidance called Safeguards Implementation Practices, SIP, guides, which are shedding light on the requirements and sharing the good practices of States. It is hoped that the SIP Guides will create a better understanding of the needs of the IAEA and the important role of States and facility operators in achieving safeguards objectives. The guides are also important for the States to share their lessons learned and good practices for the benefit of other States that might be developing their capabilities or enhancing their processes and procedures. The way is very wide and long, when a State decides to start up a new nuclear programme. At first there is a need for legislation, regulatory body, contact point, international agreements and then finally practical implementation of the safeguards in the nuclear facilities. There are a lot of issues to be prepared in advance to facilitate the IAEA's implementation of verification activities successfully, effectively and with the good quality. Using the structure of the IAEA's draft SIP Guide on Facilitating Verification Activities as a framework, this paper will describe the most relevant implementation practices and experiences in Finland. (author)

Conceptual model and economic experiments to explain nonpersistence and enable mechanism designs fostering behavioral change.

Science.gov (United States)

Djawadi, Behnud Mir; Fahr, René; Turk, Florian

2014-12-01

Medical nonpersistence is a worldwide problem of striking magnitude. Although many fields of studies including epidemiology, sociology, and psychology try to identify determinants for medical nonpersistence, comprehensive research to explain medical nonpersistence from an economics perspective is rather scarce. The aim of the study was to develop a conceptual framework that augments standard economic choice theory with psychological concepts of behavioral economics to understand how patients' preferences for discontinuing with therapy arise over the course of the medical treatment. The availability of such a framework allows the targeted design of mechanisms for intervention strategies. Our conceptual framework models the patient as an active economic agent who evaluates the benefits and costs for continuing with therapy. We argue that a combination of loss aversion and mental accounting operations explains why patients discontinue with therapy at a specific point in time. We designed a randomized laboratory economic experiment with a student subject pool to investigate the behavioral predictions. Subjects continue with therapy as long as experienced utility losses have to be compensated. As soon as previous losses are evened out, subjects perceive the marginal benefit of persistence lower than in the beginning of the treatment. Consequently, subjects start to discontinue with therapy. Our results highlight that concepts of behavioral economics capture the dynamic structure of medical nonpersistence better than does standard economic choice theory. We recommend that behavioral economics should be a mandatory part of the development of possible intervention strategies aimed at improving patients' compliance and persistence behavior. Copyright © 2014 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

The MODUS Approach to Formal Verification

Directory of Open Access Journals (Sweden)

Brewka Lukasz

2014-03-01

Full Text Available Background: Software reliability is of great importance for the development of embedded systems that are often used in applications that have requirements for safety. Since the life cycle of embedded products is becoming shorter, productivity and quality simultaneously required and closely in the process of providing competitive products Objectives: In relation to this, MODUS (Method and supporting toolset advancing embedded systems quality project aims to provide small and medium-sized businesses ways to improve their position in the embedded market through a pragmatic and viable solution Methods/Approach: This paper will describe the MODUS project with focus on the technical methodologies that can assist formal verification and formal model checking. Results: Based on automated analysis of the characteristics of the system and by controlling the choice of the existing opensource model verification engines, model verification producing inputs to be fed into these engines. Conclusions: The MODUS approach is aligned with present market needs; the familiarity with tools, the ease of use and compatibility/interoperability remain among the most important criteria when selecting the development environment for a project

ENVIRONMENTAL TECHNOLOGY VERIFICATION: TEST/QA PLAN FOR THE VERIFICATION TESTING OF SELECTIVE CATALYTIC REDUCTION CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

Science.gov (United States)

The U.S. Environmental Protection Agency established the Environmental Technology Verification Program to accelerate the development and commercialization of improved environmental technology through third party verification and reporting of product performance. Research Triangl...

Recent progress in econophysics: Chaos, leverage, and business cycles as revealed by agent-based modeling and human experiments

Science.gov (United States)

Xin, Chen; Huang, Ji-Ping

2017-12-01

Agent-based modeling and controlled human experiments serve as two fundamental research methods in the field of econophysics. Agent-based modeling has been in development for over 20 years, but how to design virtual agents with high levels of human-like "intelligence" remains a challenge. On the other hand, experimental econophysics is an emerging field; however, there is a lack of experience and paradigms related to the field. Here, we review some of the most recent research results obtained through the use of these two methods concerning financial problems such as chaos, leverage, and business cycles. We also review the principles behind assessments of agents' intelligence levels, and some relevant designs for human experiments. The main theme of this review is to show that by combining theory, agent-based modeling, and controlled human experiments, one can garner more reliable and credible results on account of a better verification of theory; accordingly, this way, a wider range of economic and financial problems and phenomena can be studied.

Recent progress in econophysics: Chaos, leverage,and business cycles as revealed by agent-based modeling and human experiments

Institute of Scientific and Technical Information of China (English)

Chen Xin; Ji-Ping Huang

2017-01-01

Agent-based modeling and controlled human experiments serve as two fundamental research methods in the field of econophysics.Agent-based modeling has been in development for over 20 years,but how to design virtual agents with high levels of human-like "intelligence" remains a challenge.On the other hand,experimental econophysics is an emerging field;however,there is a lack of experience and paradigms related to the field.Here,we review some of the most recent research results obtained through the use of these two methods concerning financial problems such as chaos,leverage,and business cycles.We also review the principles behind assessments of agents' intelligence levels,and some relevant designs for human experiments.The main theme of this review is to show that by combining theory,agent-based modeling,and controlled human experiments,one can garner more reliable and credible results on account of a better verification of theory;accordingly,this way,a wider range of economic and financial problems and phenomena can be studied.

Apollo experience report: Guidance and control systems. Engineering simulation program

Science.gov (United States)

Gilbert, D. W.

1973-01-01

The Apollo Program experience from early 1962 to July 1969 with respect to the engineering-simulation support and the problems encountered is summarized in this report. Engineering simulation in support of the Apollo guidance and control system is discussed in terms of design analysis and verification, certification of hardware in closed-loop operation, verification of hardware/software compatibility, and verification of both software and procedures for each mission. The magnitude, time, and cost of the engineering simulations are described with respect to hardware availability, NASA and contractor facilities (for verification of the command module, the lunar module, and the primary guidance, navigation, and control system), and scheduling and planning considerations. Recommendations are made regarding implementation of similar, large-scale simulations for future programs.

Verification Games: Crowd-Sourced Formal Verification

Science.gov (United States)

2016-03-01

additional paintbrushes. Additionally, in Paradox , human players are never given small optimization problems (for example, toggling the values of 50...were developed by the Center for Game Science: Pipe Jam, Traffic Jam, Flow Jam and Paradox . Verification tools and games were integrated to verify...4 4. Paradox …………………………………………………......5 5. MyClass ………………………………………………….....7 6. Results …………………………………………………......11 7. Time to

Verification of product design using regulation knowledge base and Web services

Energy Technology Data Exchange (ETDEWEB)

Kim, Ik June [KAERI, Daejeon (Korea, Republic of); Lee, Jae Chul; Mun Du Hwan [Kyungpook National University, Daegu (Korea, Republic of); Kim, Byung Chul [Dong-A University, Busan (Korea, Republic of); Hwang, Jin Sang [PartDB Co., Ltd., Daejeom (Korea, Republic of); Lim, Chae Ho [Korea Institute of Industrial Technology, Incheon (Korea, Republic of)

2015-11-15

Since product regulations contain important rules or codes that manufacturers must follow, automatic verification of product design with the regulations related to a product is necessary. For this, this study presents a new method for the verification of product design using regulation knowledge base and Web services. Regulation knowledge base consisting of product ontology and rules was built with a hybrid technique combining ontology and programming languages. Web service for design verification was developed ensuring the flexible extension of knowledge base. By virtue of two technical features, design verification is served to various products while the change of system architecture is minimized.

Verification of product design using regulation knowledge base and Web services

International Nuclear Information System (INIS)

Kim, Ik June; Lee, Jae Chul; Mun Du Hwan; Kim, Byung Chul; Hwang, Jin Sang; Lim, Chae Ho

2015-01-01

Since product regulations contain important rules or codes that manufacturers must follow, automatic verification of product design with the regulations related to a product is necessary. For this, this study presents a new method for the verification of product design using regulation knowledge base and Web services. Regulation knowledge base consisting of product ontology and rules was built with a hybrid technique combining ontology and programming languages. Web service for design verification was developed ensuring the flexible extension of knowledge base. By virtue of two technical features, design verification is served to various products while the change of system architecture is minimized.

Compromises produced by the dialectic between self-verification and self-enhancement.

Science.gov (United States)

Morling, B; Epstein, S

1997-12-01

Three studies of people's reactions to evaluative feedback demonstrated that the dialectic between self-enhancement and self-verification results in compromises between these 2 motives, as hypothesized in cognitive-experiential self-theory. The demonstration was facilitated by 2 procedural improvements: Enhancement and verification were established by calibrating evaluative feedback against self appraisals, and degree of enhancement and of verification were varied along a continuum, rather than categorically. There was also support for the hypotheses that processing in an intuitive-experiential mode favors enhancement and processing in an analytical-rational mode favors verification in the kinds of situations investigated.

Calibration and verification of surface contamination meters --- Procedures and techniques

International Nuclear Information System (INIS)

Schuler, C; Butterweck, G.; Wernli, C.; Bochud, F.; Valley, J.-F.

2007-03-01

A standardised measurement procedure for surface contamination meters (SCM) is presented. The procedure aims at rendering surface contamination measurements to be simply and safely interpretable. Essential for the approach is the introduction and common use of the radionuclide specific quantity 'guideline value' specified in the Swiss Radiation Protection Ordinance as unit for the measurement of surface activity. The according radionuclide specific 'guideline value count rate' can be summarized as verification reference value for a group of radionuclides ('basis guideline value count rate'). The concept can be generalized for SCM of the same type or for SCM of different types using he same principle of detection. A SCM multi source calibration technique is applied for the determination of the instrument efficiency. Four different electron radiation energy regions, four different photon radiation energy regions and an alpha radiation energy region are represented by a set of calibration sources built according to ISO standard 8769-2. A guideline value count rate representing the activity per unit area of a surface contamination of one guideline value can be calculated for any radionuclide using instrument efficiency, radionuclide decay data, contamination source efficiency, guideline value averaging area (100 cm 2 ), and radionuclide specific guideline value. n this way, instrument responses for the evaluation of surface contaminations are obtained for radionuclides without available calibration sources as well as for short-Iived radionuclides, for which the continuous replacement of certified calibration sources can lead to unreasonable costs. SCM verification is based on surface emission rates of reference sources with an active area of 100 cm 2 . The verification for a given list of radionuclides is based on the radionuclide specific quantity guideline value count rate. Guideline value count rates for groups of radionuclides can be represented within the maximum

Integrated knowledge base tool for acquisition and verification of NPP alarm systems

International Nuclear Information System (INIS)

Park, Joo Hyun; Seong, Poong Hyun

1998-01-01

Knowledge acquisition and knowledge base verification are important activities in developing knowledge-based systems such as alarm processing systems. In this work, we developed the integrated tool, for knowledge acquisition and verification of NPP alarm processing systems, by using G2 tool. The tool integrates document analysis method and ECPN matrix analysis method, for knowledge acquisition and knowledge verification, respectively. This tool enables knowledge engineers to perform their tasks from knowledge acquisition to knowledge verification consistently

Spectral Analysis of Forecast Error Investigated with an Observing System Simulation Experiment

Science.gov (United States)

Prive, N. C.; Errico, Ronald M.

2015-01-01

The spectra of analysis and forecast error are examined using the observing system simulation experiment (OSSE) framework developed at the National Aeronautics and Space Administration Global Modeling and Assimilation Office (NASAGMAO). A global numerical weather prediction model, the Global Earth Observing System version 5 (GEOS-5) with Gridpoint Statistical Interpolation (GSI) data assimilation, is cycled for two months with once-daily forecasts to 336 hours to generate a control case. Verification of forecast errors using the Nature Run as truth is compared with verification of forecast errors using self-analysis; significant underestimation of forecast errors is seen using self-analysis verification for up to 48 hours. Likewise, self analysis verification significantly overestimates the error growth rates of the early forecast, as well as mischaracterizing the spatial scales at which the strongest growth occurs. The Nature Run-verified error variances exhibit a complicated progression of growth, particularly for low wave number errors. In a second experiment, cycling of the model and data assimilation over the same period is repeated, but using synthetic observations with different explicitly added observation errors having the same error variances as the control experiment, thus creating a different realization of the control. The forecast errors of the two experiments become more correlated during the early forecast period, with correlations increasing for up to 72 hours before beginning to decrease.

Transmutation Fuel Performance Code Thermal Model Verification

Energy Technology Data Exchange (ETDEWEB)

Gregory K. Miller; Pavel G. Medvedev

2007-09-01

FRAPCON fuel performance code is being modified to be able to model performance of the nuclear fuels of interest to the Global Nuclear Energy Partnership (GNEP). The present report documents the effort for verification of the FRAPCON thermal model. It was found that, with minor modifications, FRAPCON thermal model temperature calculation agrees with that of the commercial software ABAQUS (Version 6.4-4). This report outlines the methodology of the verification, code input, and calculation results.

Verification and Validation of RADTRAN 5.5.

Energy Technology Data Exchange (ETDEWEB)

Osborn, Douglas.; Weiner, Ruth F.; Mills, George Scott; Hamp, Steve C.

2005-02-01

This document contains a description of the verification and validation process used for the RADTRAN 5.5 code. The verification and validation process ensured the proper calculational models and mathematical and numerical methods were used in the RADTRAN 5.5 code for the determination of risk and consequence assessments. The differences between RADTRAN 5 and RADTRAN 5.5 are the addition of tables, an expanded isotope library, and the additional User-Defined meteorological option for accident dispersion. 3

Comparing formal verification approaches of interlocking systems

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth; Nguyen, Hoang Nga; Roggenbach, Markus

2016-01-01

these approaches. As a first step towards this, in this paper we suggest a way to compare different formal approaches for verifying designs of route-based interlocking systems and we demonstrate it on modelling and verification approaches developed within the research groups at DTU/Bremen and at Surrey......The verification of railway interlocking systems is a challenging task, and therefore several research groups have suggested to improve this task by using formal methods, but they use different modelling and verification approaches. To advance this research, there is a need to compare....../Swansea. The focus is on designs that are specified by so-called control tables. The paper can serve as a starting point for further comparative studies. The DTU/Bremen research has been funded by the RobustRailS project granted by Innovation Fund Denmark. The Surrey/Swansea research has been funded by the Safe...

Seismic verification methods for structures and equipment of VVER-type and RBMK-type NPPs (summary of experiences)

International Nuclear Information System (INIS)

Masopust, R.

2003-01-01

The main verification methods for structures and equipment of already existing VVER-type and RBMK-type NPPs are briefly described. The following aspects are discussed: fundamental seismic safety assessment principles for VVER/RBMK-type NPPs (seismic safety assessment procedure, typical work plan for seismic safety assessment of existing NPPs, SMA (HCLPF) calculations, modified GIP (GIP-VVER) procedure, similarity of VVER/RBMK equipment to that included in the SQUG databases and seismic interactions

Applied economic model development algorithm for electronics company

Directory of Open Access Journals (Sweden)

Mikhailov I.

2017-01-01

Full Text Available The purpose of this paper is to report about received experience in the field of creating the actual methods and algorithms that help to simplify development of applied decision support systems. It reports about an algorithm, which is a result of two years research and have more than one-year practical verification. In a case of testing electronic components, the time of the contract conclusion is crucial point to make the greatest managerial mistake. At this stage, it is difficult to achieve a realistic assessment of time-limit and of wage-fund for future work. The creation of estimating model is possible way to solve this problem. In the article is represented an algorithm for creation of those models. The algorithm is based on example of the analytical model development that serves for amount of work estimation. The paper lists the algorithm’s stages and explains their meanings with participants’ goals. The implementation of the algorithm have made possible twofold acceleration of these models development and fulfilment of management’s requirements. The resulting models have made a significant economic effect. A new set of tasks was identified to be further theoretical study.

Investigation of the use of MOSFET for clinical IMRT dosimetric verification

International Nuclear Information System (INIS)

Chuang, Cynthia F.; Verhey, Lynn J.; Xia Ping

2002-01-01

With advanced conformal radiotherapy using intensity modulated beams, it is important to have radiation dose verification measurements prior to treatment. Metal oxide semiconductor field effect transistors (MOSFET) have the advantage of a faster and simpler reading procedure compared to thermoluminescent dosimeters (TLD), and with the commercial MOSFET system, multiple detectors can be used simultaneously. In addition, the small size of the detector could be advantageous, especially for point dose measurements in small homogeneous dose regions. To evaluate the feasibility of MOSFET for routine IMRT dosimetry, a comprehensive set of experiments has been conducted, to investigate the stability, linearity, energy, and angular dependence. For a period of two weeks, under a standard measurement setup, the measured dose standard deviation using the MOSFETs was ±0.015 Gy with the mean dose being 1.00 Gy. For a measured dose range of 0.3 Gy to 4.2 Gy, the MOSFETs present a linear response, with a linearity coefficient of 0.998. Under a 10x10 cm 2 square field, the dose variations measured by the MOSFETs for every 10 degrees from 0 to 180 degrees is ±2.5%. The percent depth dose (PDD) measurements were used to verify the energy dependence. The measured PDD using the MOSFETs from 0.5 cm to 34 cm depth agreed to within ±3% when compared to that of the ionization chamber. For IMRT dose verification, two special phantoms were designed. One is a solid water slab with 81 possible MOSFET placement holes, and another is a cylindrical phantom with 48 placement holes. For each IMRT phantom verification, an ionization chamber and 3 to 5 MOSFETs were used to measure multiple point doses at different locations. Preliminary results show that the agreement between dose measured by MOSFET and that calculated by Corvus is within 5% error, while the agreement between ionization chamber measurement and the calculation is within 3% error. In conclusion, MOSFET detectors are suitable for

Implementation and verification of global optimization benchmark problems

Directory of Open Access Journals (Sweden)

Posypkin Mikhail

2017-12-01

Full Text Available The paper considers the implementation and verification of a test suite containing 150 benchmarks for global deterministic box-constrained optimization. A C++ library for describing standard mathematical expressions was developed for this purpose. The library automate the process of generating the value of a function and its’ gradient at a given point and the interval estimates of a function and its’ gradient on a given box using a single description. Based on this functionality, we have developed a collection of tests for an automatic verification of the proposed benchmarks. The verification has shown that literary sources contain mistakes in the benchmarks description. The library and the test suite are available for download and can be used freely.

Integrated Java Bytecode Verification

DEFF Research Database (Denmark)

Gal, Andreas; Probst, Christian; Franz, Michael

2005-01-01

Existing Java verifiers perform an iterative data-flow analysis to discover the unambiguous type of values stored on the stack or in registers. Our novel verification algorithm uses abstract interpretation to obtain definition/use information for each register and stack location in the program...

Economic accounting of water: The Botswana experience

Science.gov (United States)

Setlhogile, T.; Arntzen, J.; Pule, O. B.

2017-08-01

Water accounts aim to capture the value of water resources and their use within the economy. The accounts complement the National Accounts as the latter's main indicator (GDP) does not reflect changes in natural capital. Botswana developed water accounts for the period 2010/11-2014/15 using the UN's standard System of Environmental Economic Accounting for water (SEEA-water). The article focuses both on the construction of physical flow accounts as well as on the policy implications for development planning and water resource management through the use of policy indicators. It also shows long-term trends in water abstraction and water use efficiency linking the SEEA water accounts with results of earlier (non-SEEA) water accounting projects in Botswana. The water accounts results show that water abstraction and consumption have been largely stable since 2010/11 despite population (1.9% p.a.) and economic growth (around 5% p.a.) likely due to a combination of water sector reforms and drought conditions in south eastern Botswana; the latter led to the drying up of several dams and the imposition of severe water restrictions. While public attention focuses mostly on water service providers, self-providers (mines and the agricultural sector) account for more than 50% of total water abstracted from the environment of water, demonstrating the need to pay more attention to self-providers in IWRM implementation. Water consumption is highest for the agricultural sector (70.2 Mm3) followed by households and mines at 41.2 and 39 Mm3 respectively in 2014/15. In terms of water use efficiency, value added per m3 has increased in time, showing (some) decoupling of water consumption and economic growth. This positive trend needs to be enhanced in the pursuit of economic diversification, which should focus on growth of water-efficient economic sectors. Finally, per capita water consumption has decreased over time; while this may indicate that people conserve water, it may also point

Radiochemical verification and validation in the environmental data collection process

International Nuclear Information System (INIS)

Rosano-Reece, D.; Bottrell, D.; Bath, R.J.

1994-01-01

A credible and cost effective environmental data collection process should produce analytical data which meets regulatory and program specific requirements. Analytical data, which support the sampling and analysis activities at hazardous waste sites, undergo verification and independent validation before the data are submitted to regulators. Understanding the difference between verification and validation and their respective roles in the sampling and analysis process is critical to the effectiveness of a program. Verification is deciding whether the measurement data obtained are what was requested. The verification process determines whether all the requirements were met. Validation is more complicated than verification. It attempts to assess the impacts on data use, especially when requirements are not met. Validation becomes part of the decision-making process. Radiochemical data consists of a sample result with an associated error. Therefore, radiochemical validation is different and more quantitative than is currently possible for the validation of hazardous chemical data. Radiochemical data include both results and uncertainty that can be statistically compared to identify significance of differences in a more technically defensible manner. Radiochemical validation makes decisions about analyte identification, detection, and uncertainty for a batch of data. The process focuses on the variability of the data in the context of the decision to be made. The objectives of this paper are to present radiochemical verification and validation for environmental data and to distinguish the differences between the two operations

Automatic verification of a lip-synchronisation protocol using Uppaal

NARCIS (Netherlands)

Bowman, H.; Faconti, G.; Katoen, J.-P.; Latella, D.; Massink, M.

1998-01-01

We present the formal specification and verification of a lip-synchronisation protocol using the real-time model checker Uppaal. A number of specifications of this protocol can be found in the literature, but this is the first automatic verification. We take a published specification of the

Numident Online Verification Utility (NOVU)

Data.gov (United States)

Social Security Administration — NOVU is a mainframe application that accesses the NUMIDENT to perform real-time SSN verifications. This program is called by other SSA online programs that serve as...

Do the TTBT and JVE provide a framework for 'effective' verification?

International Nuclear Information System (INIS)

Vergino, E.S.

1998-01-01

The Threshold Test Ban Treaty (TTBT) was signed in 1974 by Richard Nixon and Leonid Brezhnev with both the US and USSR agreeing to adhere to the 150 kt limit of the treaty as of March 31, 1976. Yet the treaty remained non ratified for more than twelve years and during this time during the height of the Cold War, the US and USSR continued to accuse one another of violating the treaty. During late 1987, during the Nuclear Testing Talks in Geneva the Joint Verification Experiment (JVE) was discussed and then was formally announced at the Shultz/Shevardnadze meeting in December, 1987. In the course of arranging JVE Information and data for five Soviet and five US nuclear tests, were exchanged. JVE activity culminated with Kearsarge, detonated on August 17, 1988 and Shagan, detonated on September 14, 1988. JVE provided a unique opportunity for US and USSR technical experts to work together to demonstrate that effective verification of the TTBT could be achieved. The TTBT was the first treaty in which the US pursued a series of complex protocols involving additional, intrusive verification measures. These required extensive collaboration between scientific and political communities, a collaboration necessary to address the balance between the technical capabilities and requirements and the political drivers and needs. During this talk the author discusses this balance, how the balance changed with time, the drivers for change and the lessons learned, and weather there are lessons to be learned that are applicable to the development of other, future, arms control agreements

Systematic study of source mask optimization and verification flows

Science.gov (United States)

Ben, Yu; Latypov, Azat; Chua, Gek Soon; Zou, Yi

2012-06-01

Source mask optimization (SMO) emerged as powerful resolution enhancement technique (RET) for advanced technology nodes. However, there is a plethora of flow and verification metrics in the field, confounding the end user of the technique. Systemic study of different flows and the possible unification thereof is missing. This contribution is intended to reveal the pros and cons of different SMO approaches and verification metrics, understand the commonality and difference, and provide a generic guideline for RET selection via SMO. The paper discusses 3 different type of variations commonly arise in SMO, namely pattern preparation & selection, availability of relevant OPC recipe for freeform source and finally the metrics used in source verification. Several pattern selection algorithms are compared and advantages of systematic pattern selection algorithms are discussed. In the absence of a full resist model for SMO, alternative SMO flow without full resist model is reviewed. Preferred verification flow with quality metrics of DOF and MEEF is examined.

Experimental quantum verification in the presence of temporally correlated noise

Science.gov (United States)

Mavadia, S.; Edmunds, C. L.; Hempel, C.; Ball, H.; Roy, F.; Stace, T. M.; Biercuk, M. J.

2018-02-01

Growth in the capabilities of quantum information hardware mandates access to techniques for performance verification that function under realistic laboratory conditions. Here we experimentally characterise the impact of common temporally correlated noise processes on both randomised benchmarking (RB) and gate-set tomography (GST). Our analysis highlights the role of sequence structure in enhancing or suppressing the sensitivity of quantum verification protocols to either slowly or rapidly varying noise, which we treat in the limiting cases of quasi-DC miscalibration and white noise power spectra. We perform experiments with a single trapped 171Yb+ ion-qubit and inject engineered noise (" separators="∝σ^ z ) to probe protocol performance. Experiments on RB validate predictions that measured fidelities over sequences are described by a gamma distribution varying between approximately Gaussian, and a broad, highly skewed distribution for rapidly and slowly varying noise, respectively. Similarly we find a strong gate set dependence of default experimental GST procedures in the presence of correlated errors, leading to significant deviations between estimated and calculated diamond distances in the presence of correlated σ^ z errors. Numerical simulations demonstrate that expansion of the gate set to include negative rotations can suppress these discrepancies and increase reported diamond distances by orders of magnitude for the same error processes. Similar effects do not occur for correlated σ^ x or σ^ y errors or depolarising noise processes, highlighting the impact of the critical interplay of selected gate set and the gauge optimisation process on the meaning of the reported diamond norm in correlated noise environments.

Organics Verification Study for Sinclair and Dyes Inlets, Washington

Energy Technology Data Exchange (ETDEWEB)

Kohn, Nancy P.; Brandenberger, Jill M.; Niewolny, Laurie A.; Johnston, Robert K.

2006-09-28

Sinclair and Dyes Inlets near Bremerton, Washington, are on the State of Washington 1998 303(d) list of impaired waters because of fecal coliform contamination in marine water, metals in sediment and fish tissue, and organics in sediment and fish tissue. Because significant cleanup and source control activities have been conducted in the inlets since the data supporting the 1998 303(d) listings were collected, two verification studies were performed to address the 303(d) segments that were listed for metal and organic contaminants in marine sediment. The Metals Verification Study (MVS) was conducted in 2003; the final report, Metals Verification Study for Sinclair and Dyes Inlets, Washington, was published in March 2004 (Kohn et al. 2004). This report describes the Organics Verification Study that was conducted in 2005. The study approach was similar to the MVS in that many surface sediment samples were screened for the major classes of organic contaminants, and then the screening results and other available data were used to select a subset of samples for quantitative chemical analysis. Because the MVS was designed to obtain representative data on concentrations of contaminants in surface sediment throughout Sinclair Inlet, Dyes Inlet, Port Orchard Passage, and Rich Passage, aliquots of the 160 MVS sediment samples were used in the analysis for the Organics Verification Study. However, unlike metals screening methods, organics screening methods are not specific to individual organic compounds, and are not available for some target organics. Therefore, only the quantitative analytical results were used in the organics verification evaluation. The results of the Organics Verification Study showed that sediment quality outside of Sinclair Inlet is unlikely to be impaired because of organic contaminants. Similar to the results for metals, in Sinclair Inlet, the distribution of residual organic contaminants is generally limited to nearshore areas already within the

Design verification for reactor head replacement

International Nuclear Information System (INIS)

Dwivedy, K.K.; Whitt, M.S.; Lee, R.

2005-01-01

This paper outlines the challenges of design verification for reactor head replacement for PWR plants and the program for qualification from the prospective of the utility design engineering group. This paper is based on the experience with the design confirmation of four reactor head replacements for two plants, and their interfacing components, parts, appurtenances, and support structures. The reactor head replacement falls under the jurisdiction of the applicable edition of the ASME Section XI code, with particular reference to repair/replacement activities. Under any repair/replacement activities, demands may be encountered in the development of program and plan for replacement due to the vintage of the original design/construction Code and the design reports governing the component qualifications. Because of the obvious importance of the reactor vessel, these challenges take on an added significance. Additional complexities are introduced to the project, when the replacement components are fabricated by vendors different from the original vendor. Specific attention is needed with respect to compatibility with the original design and construction of the part and interfacing components. The program for reactor head replacement requires evaluation of welding procedures, applicable examination, test, and acceptance criteria for material, welds, and the components. Also, the design needs to take into consideration the life of the replacement components with respect to the extended period of operation of the plant after license renewal and other plant improvements. Thus, the verification of acceptability of reactor head replacement provides challenges for development and maintenance of a program and plan, design specification, design report, manufacturer's data report and material certification, and a report of reconciliation. The technical need may also be compounded by other challenges such as widely scattered global activities and organizational barriers, which

Inspection and verification of waste packages for near surface disposal

International Nuclear Information System (INIS)

2000-01-01

Extensive experience has been gained with various disposal options for low and intermediate level waste at or near surface disposal facilities. Near surface disposal is based on proven and well demonstrated technologies. To ensure the safety of near surface disposal facilities when available technologies are applied, it is necessary to control and assure the quality of the repository system's performance, which includes waste packages, engineered features and natural barriers, as well as siting, design, construction, operation, closure and institutional controls. Recognizing the importance of repository performance, the IAEA is producing a set of technical publications on quality assurance and quality control (QA/QC) for waste disposal to provide Member States with technical guidance and current information. These publications cover issues on the application of QA/QC programmes to waste disposal, long term record management, and specific QA/QC aspects of waste packaging, repository design and R and D. Waste package QA/QC is especially important because the package is the primary barrier to radionuclide release from a disposal facility. Waste packaging also involves interface issues between the waste generator and the disposal facility operator. Waste should be packaged by generators to meet waste acceptance requirements set for a repository or disposal system. However, it is essential that the disposal facility operator ensure that waste packages conform with disposal facility acceptance requirements. Demonstration of conformance with disposal facility acceptance requirements can be achieved through the systematic inspection and verification of waste packages at both the waste generator's site and at the disposal facility, based on a waste package QA/QC programme established by the waste generator and approved by the disposal operator. However, strategies, approaches and the scope of inspection and verification will be somewhat different from country to country

The role of the United Nations in the field of verification

International Nuclear Information System (INIS)

1991-01-01

By resolution 43/81 B of 7 December 1988, the General Assembly requested the Secretary General to undertake, with the assistance of a group of qualified governmental experts, an in-depth study of the role of the United Nations in the field of verification. In August 1990, the Secretary-General transmitted to the General Assembly the unanimously approved report of the experts. The report is structured in six chapters and contains a bibliographic appendix on technical aspects of verification. The Introduction provides a brief historical background on the development of the question of verification in the United Nations context, culminating with the adoption by the General Assembly of resolution 43/81 B, which requested the study. Chapters II and III address the definition and functions of verification and the various approaches, methods, procedures and techniques used in the process of verification. Chapters IV and V examine the existing activities of the United Nations in the field of verification, possibilities for improvements in those activities as well as possible additional activities, while addressing the organizational, technical, legal, operational and financial implications of each of the possibilities discussed. Chapter VI presents the conclusions and recommendations of the Group

Integrating Fingerprint Verification into the Smart Card-Based Healthcare Information System

Directory of Open Access Journals (Sweden)

Jin-Won Park

2009-01-01

Full Text Available As VLSI technology has been improved, a smart card employing 32-bit processors has been released, and more personal information such as medical, financial data can be stored in the card. Thus, it becomes important to protect personal information stored in the card. Verification of the card holder's identity using a fingerprint has advantages over the present practices of Personal Identification Numbers (PINs and passwords. However, the computational workload of fingerprint verification is much heavier than that of the typical PIN-based solution. In this paper, we consider three strategies to implement fingerprint verification in a smart card environment and how to distribute the modules of fingerprint verification between the smart card and the card reader. We first evaluate the number of instructions of each step of a typical fingerprint verification algorithm, and estimate the execution time of several cryptographic algorithms to guarantee the security/privacy of the fingerprint data transmitted in the smart card with the client-server environment. Based on the evaluation results, we analyze each scenario with respect to the security level and the real-time execution requirements in order to implement fingerprint verification in the smart card with the client-server environment.

Integrating Fingerprint Verification into the Smart Card-Based Healthcare Information System

Science.gov (United States)

Moon, Daesung; Chung, Yongwha; Pan, Sung Bum; Park, Jin-Won

2009-12-01

As VLSI technology has been improved, a smart card employing 32-bit processors has been released, and more personal information such as medical, financial data can be stored in the card. Thus, it becomes important to protect personal information stored in the card. Verification of the card holder's identity using a fingerprint has advantages over the present practices of Personal Identification Numbers (PINs) and passwords. However, the computational workload of fingerprint verification is much heavier than that of the typical PIN-based solution. In this paper, we consider three strategies to implement fingerprint verification in a smart card environment and how to distribute the modules of fingerprint verification between the smart card and the card reader. We first evaluate the number of instructions of each step of a typical fingerprint verification algorithm, and estimate the execution time of several cryptographic algorithms to guarantee the security/privacy of the fingerprint data transmitted in the smart card with the client-server environment. Based on the evaluation results, we analyze each scenario with respect to the security level and the real-time execution requirements in order to implement fingerprint verification in the smart card with the client-server environment.

45 CFR 1626.7 - Verification of eligible alien status.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Verification of eligible alien status. 1626.7... CORPORATION RESTRICTIONS ON LEGAL ASSISTANCE TO ALIENS § 1626.7 Verification of eligible alien status. (a) An alien seeking representation shall submit appropriate documents to verify eligibility, unless the only...

Agreements on climatic protection - the verification problem. IKARUS. Instrumente fuer Klimagas-Reduktionsstrategien. Final report. Subproject 9: International Greenhouse Gas Verification

Energy Technology Data Exchange (ETDEWEB)

Fischer, W.; Hoffmann, H.J.; Katscher, W.; Kotte, U.; Lauppe, W.D.; Stein, G.

1995-12-31

The sustained reduction of climate gas emissions associated with the generation, conversion and utilization of energy is clearly becoming an ever more important task in energy and environmental policy. Different strategies are conceivable in order to fulfil this mission. The aim of the IKARUS Project (Instrumente fuer Klimagas-Reduktionsstrategien - Instruments for Greenhouse Gas Reduction Strategies) was to provide a set of tools with which strategies can be developed and reconstructed (making conceptual use of the various technologies) and also tested with respect to their internal consistency and examined with regard to their economic impacts. Corresponding to the great complexity of the task in hand and the technological range of energy applications, the set of instruments is very extensive. It consists of two parts: a data base with a comprehensive data collection and several computer models of various types.The ``Verification`` project was integrated into IKARUS as a link between the national project and the international environment, enabling the examination of technologies and methods for verifying the compliance of statesparty to the Framwork Convention on Climate Change (FCCC).(orig/KW)

A Quantitative Approach to the Formal Verification of Real-Time Systems.

Science.gov (United States)

1996-09-01

Computer Science A Quantitative Approach to the Formal Verification of Real - Time Systems Sergio Vale Aguiar Campos September 1996 CMU-CS-96-199...ptisiic raieaiSI v Diambimos Lboiamtad _^ A Quantitative Approach to the Formal Verification of Real - Time Systems Sergio Vale Aguiar Campos...implied, of NSF, the Semiconduc- tor Research Corporation, ARPA or the U.S. government. Keywords: real - time systems , formal verification, symbolic

Investigation of burnup credit allowance in the criticality safety evaluation of spent fuel casks

International Nuclear Information System (INIS)

Lake, W.H.; Sanders, T.L.; Parks, C.V.

1990-01-01

This presentation discusses work in progress on criticality analysis verification for designs which take account of the burnup and age of transported fuel. The work includes verification of cross section data, correlation with experiments, proper extension of the methods into regimes not covered by experiments, establishing adequate reactivity margins, and complete documentation of the project. Recommendations for safe operational procedures are included, as well as a discussion of the economic and safety benefits of such designs

Distorted Fingerprint Verification System

Directory of Open Access Journals (Sweden)

Divya KARTHIKAESHWARAN

2011-01-01

Full Text Available Fingerprint verification is one of the most reliable personal identification methods. Fingerprint matching is affected by non-linear distortion introduced in fingerprint impression during the image acquisition process. This non-linear deformation changes both the position and orientation of minutiae. The proposed system operates in three stages: alignment based fingerprint matching, fuzzy clustering and classifier framework. First, an enhanced input fingerprint image has been aligned with the template fingerprint image and matching score is computed. To improve the performance of the system, a fuzzy clustering based on distance and density has been used to cluster the feature set obtained from the fingerprint matcher. Finally a classifier framework has been developed and found that cost sensitive classifier produces better results. The system has been evaluated on fingerprint database and the experimental result shows that system produces a verification rate of 96%. This system plays an important role in forensic and civilian applications.

Enhanced verification test suite for physics simulation codes

Energy Technology Data Exchange (ETDEWEB)

Kamm, James R.; Brock, Jerry S.; Brandon, Scott T.; Cotrell, David L.; Johnson, Bryan; Knupp, Patrick; Rider, William J.; Trucano, Timothy G.; Weirs, V. Gregory

2008-09-01

This document discusses problems with which to augment, in quantity and in quality, the existing tri-laboratory suite of verification problems used by Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratories (SNL). The purpose of verification analysis is demonstrate whether the numerical results of the discretization algorithms in physics and engineering simulation codes provide correct solutions of the corresponding continuum equations.

Memory Efficient Data Structures for Explicit Verification of Timed Systems

DEFF Research Database (Denmark)

Taankvist, Jakob Haahr; Srba, Jiri; Larsen, Kim Guldstrand

2014-01-01

Timed analysis of real-time systems can be performed using continuous (symbolic) or discrete (explicit) techniques. The explicit state-space exploration can be considerably faster for models with moderately small constants, however, at the expense of high memory consumption. In the setting of timed......-arc Petri nets, we explore new data structures for lowering the used memory: PTries for efficient storing of configurations and time darts for semi-symbolic description of the state-space. Both methods are implemented as a part of the tool TAPAAL and the experiments document at least one order of magnitude...... of memory savings while preserving comparable verification times....

The discount rate in the economic evaluation of prevention: a thought experiment.

Science.gov (United States)

Bonneux, L; Birnie, E

2001-02-01

In the standard economic model of evaluation, constant discount rates devalue the long term health benefits of prevention strongly. This study shows that it is unlikely that this reflects societal preference. A thought experiment in a cause elimination life table calculates savings of eliminating cardiovascular disease from the Dutch population. A cost effectiveness analysis calculates the acceptable costs of such an intervention at a threshold of 18 000 Euro per saved life year. Cause specific mortality (all cardiovascular causes of death and all other causes) and health care costs (all costs of cardiovascular disease and all other causes of costs) by age and male sex of 1994. At a 0% discount rate, an intervention eliminating cardiovascular disease may cost 71 100 Euro. At the same threshold but at discount rates of 3% or 6%, the same intervention may cost 8100 Euro (8.8 times less) or 1100 Euro (65 times less). The standard economic model needs more realistic duration dependent models of time preference, which reflect societal preference.

Test-driven verification/validation of model transformations

Institute of Scientific and Technical Information of China (English)

László LENGYEL; Hassan CHARAF

2015-01-01

Why is it important to verify/validate model transformations? The motivation is to improve the quality of the trans-formations, and therefore the quality of the generated software artifacts. Verified/validated model transformations make it possible to ensure certain properties of the generated software artifacts. In this way, verification/validation methods can guarantee different requirements stated by the actual domain against the generated/modified/optimized software products. For example, a verified/ validated model transformation can ensure the preservation of certain properties during the model-to-model transformation. This paper emphasizes the necessity of methods that make model transformation verified/validated, discusses the different scenarios of model transformation verification and validation, and introduces the principles of a novel test-driven method for verifying/ validating model transformations. We provide a solution that makes it possible to automatically generate test input models for model transformations. Furthermore, we collect and discuss the actual open issues in the field of verification/validation of model transformations.

Damage Detection and Verification System (DDVS) for In-Situ Health Monitoring

Science.gov (United States)

Williams, Martha K.; Lewis, Mark; Szafran, J.; Shelton, C.; Ludwig, L.; Gibson, T.; Lane, J.; Trautwein, T.

2015-01-01

Project presentation for Game Changing Program Smart Book Release. Detection and Verification System (DDVS) expands the Flat Surface Damage Detection System (FSDDS) sensory panels damage detection capabilities and includes an autonomous inspection capability utilizing cameras and dynamic computer vision algorithms to verify system health. Objectives of this formulation task are to establish the concept of operations, formulate the system requirements for a potential ISS flight experiment, and develop a preliminary design of an autonomous inspection capability system that will be demonstrated as a proof-of-concept ground based damage detection and inspection system.

Testing and verification of a novel single-channel IGBT driver circuit

Directory of Open Access Journals (Sweden)

Lukić Milan

2016-01-01

Full Text Available This paper presents a novel single-channel IGBT driver circuit together with a procedure for testing and verification. It is based on a specialized integrated circuit with complete range of protective functions. Experiments are performed to test and verify its behaviour. Experimental results are presented in the form of oscilloscope recordings. It is concluded that the new driver circuit is compatible with modern IGBT transistors and power converter demands and that it can be applied in new designs. It is a part of new 20kW industrial-grade boost converter.

Verification and validation of RADMODL Version 1.0

International Nuclear Information System (INIS)

Kimball, K.D.

1993-03-01

RADMODL is a system of linked computer codes designed to calculate the radiation environment following an accident in which nuclear materials are released. The RADMODL code and the corresponding Verification and Validation (V ampersand V) calculations (Appendix A), were developed for Westinghouse Savannah River Company (WSRC) by EGS Corporation (EGS). Each module of RADMODL is an independent code and was verified separately. The full system was validated by comparing the output of the various modules with the corresponding output of a previously verified version of the modules. The results of the verification and validation tests show that RADMODL correctly calculates the transport of radionuclides and radiation doses. As a result of this verification and validation effort, RADMODL Version 1.0 is certified for use in calculating the radiation environment following an accident

Verification and validation of RADMODL Version 1.0

Energy Technology Data Exchange (ETDEWEB)

Kimball, K.D.

1993-03-01

RADMODL is a system of linked computer codes designed to calculate the radiation environment following an accident in which nuclear materials are released. The RADMODL code and the corresponding Verification and Validation (V&V) calculations (Appendix A), were developed for Westinghouse Savannah River Company (WSRC) by EGS Corporation (EGS). Each module of RADMODL is an independent code and was verified separately. The full system was validated by comparing the output of the various modules with the corresponding output of a previously verified version of the modules. The results of the verification and validation tests show that RADMODL correctly calculates the transport of radionuclides and radiation doses. As a result of this verification and validation effort, RADMODL Version 1.0 is certified for use in calculating the radiation environment following an accident.

Importance of core/concrete interactions for German risk investigations and experimental verification

International Nuclear Information System (INIS)

Rohde, J.; Hicken, E.F.; Friederichs, H.G.; Schroedl, E.

1987-01-01

The relevance of Molten Core Concrete Interactions (MCCI) for risk oriented investigations of German LWR-plants is evaluated. The problems of MCCI have been intensely investigated since the mid seventies in connection with the German Risk Study, Phase A and B on PWR plants of German design. Many examinations of both theoretical and experimental nature have led to the development of computer codes like WECHSL. The basis for verification is the internationally well accepted BETA experiment. Code WECHSL and the knowledge gained from the BETA experiment have been applied for the final investigations in German Risk Study, Phase B. Knowledge gained will be illustrated and its importance MCCI for German LWR-concepts will be shown

Online 3D EPID-based dose verification: Proof of concept

Energy Technology Data Exchange (ETDEWEB)

Spreeuw, Hanno; Rozendaal, Roel, E-mail: r.rozendaal@nki.nl; Olaciregui-Ruiz, Igor; González, Patrick; Mans, Anton; Mijnheer, Ben [Department of Radiation Oncology, The Netherlands Cancer Institute, Amsterdam 1066 CX (Netherlands); Herk, Marcel van [University of Manchester, Manchester Academic Health Science Centre, The Christie NHS Foundation Trust, Manchester M20 4BX (United Kingdom)

2016-07-15

Purpose: Delivery errors during radiotherapy may lead to medical harm and reduced life expectancy for patients. Such serious incidents can be avoided by performing dose verification online, i.e., while the patient is being irradiated, creating the possibility of halting the linac in case of a large overdosage or underdosage. The offline EPID-based 3D in vivo dosimetry system clinically employed at our institute is in principle suited for online treatment verification, provided the system is able to complete 3D dose reconstruction and verification within 420 ms, the present acquisition time of a single EPID frame. It is the aim of this study to show that our EPID-based dosimetry system can be made fast enough to achieve online 3D in vivo dose verification. Methods: The current dose verification system was sped up in two ways. First, a new software package was developed to perform all computations that are not dependent on portal image acquisition separately, thus removing the need for doing these calculations in real time. Second, the 3D dose reconstruction algorithm was sped up via a new, multithreaded implementation. Dose verification was implemented by comparing planned with reconstructed 3D dose distributions delivered to two regions in a patient: the target volume and the nontarget volume receiving at least 10 cGy. In both volumes, the mean dose is compared, while in the nontarget volume, the near-maximum dose (D2) is compared as well. The real-time dosimetry system was tested by irradiating an anthropomorphic phantom with three VMAT plans: a 6 MV head-and-neck treatment plan, a 10 MV rectum treatment plan, and a 10 MV prostate treatment plan. In all plans, two types of serious delivery errors were introduced. The functionality of automatically halting the linac was also implemented and tested. Results: The precomputation time per treatment was ∼180 s/treatment arc, depending on gantry angle resolution. The complete processing of a single portal frame

Online 3D EPID-based dose verification: Proof of concept

International Nuclear Information System (INIS)

Spreeuw, Hanno; Rozendaal, Roel; Olaciregui-Ruiz, Igor; González, Patrick; Mans, Anton; Mijnheer, Ben; Herk, Marcel van

2016-01-01

Purpose: Delivery errors during radiotherapy may lead to medical harm and reduced life expectancy for patients. Such serious incidents can be avoided by performing dose verification online, i.e., while the patient is being irradiated, creating the possibility of halting the linac in case of a large overdosage or underdosage. The offline EPID-based 3D in vivo dosimetry system clinically employed at our institute is in principle suited for online treatment verification, provided the system is able to complete 3D dose reconstruction and verification within 420 ms, the present acquisition time of a single EPID frame. It is the aim of this study to show that our EPID-based dosimetry system can be made fast enough to achieve online 3D in vivo dose verification. Methods: The current dose verification system was sped up in two ways. First, a new software package was developed to perform all computations that are not dependent on portal image acquisition separately, thus removing the need for doing these calculations in real time. Second, the 3D dose reconstruction algorithm was sped up via a new, multithreaded implementation. Dose verification was implemented by comparing planned with reconstructed 3D dose distributions delivered to two regions in a patient: the target volume and the nontarget volume receiving at least 10 cGy. In both volumes, the mean dose is compared, while in the nontarget volume, the near-maximum dose (D2) is compared as well. The real-time dosimetry system was tested by irradiating an anthropomorphic phantom with three VMAT plans: a 6 MV head-and-neck treatment plan, a 10 MV rectum treatment plan, and a 10 MV prostate treatment plan. In all plans, two types of serious delivery errors were introduced. The functionality of automatically halting the linac was also implemented and tested. Results: The precomputation time per treatment was ∼180 s/treatment arc, depending on gantry angle resolution. The complete processing of a single portal frame

Online 3D EPID-based dose verification: Proof of concept.

Science.gov (United States)

Spreeuw, Hanno; Rozendaal, Roel; Olaciregui-Ruiz, Igor; González, Patrick; Mans, Anton; Mijnheer, Ben; van Herk, Marcel

2016-07-01

Delivery errors during radiotherapy may lead to medical harm and reduced life expectancy for patients. Such serious incidents can be avoided by performing dose verification online, i.e., while the patient is being irradiated, creating the possibility of halting the linac in case of a large overdosage or underdosage. The offline EPID-based 3D in vivo dosimetry system clinically employed at our institute is in principle suited for online treatment verification, provided the system is able to complete 3D dose reconstruction and verification within 420 ms, the present acquisition time of a single EPID frame. It is the aim of this study to show that our EPID-based dosimetry system can be made fast enough to achieve online 3D in vivo dose verification. The current dose verification system was sped up in two ways. First, a new software package was developed to perform all computations that are not dependent on portal image acquisition separately, thus removing the need for doing these calculations in real time. Second, the 3D dose reconstruction algorithm was sped up via a new, multithreaded implementation. Dose verification was implemented by comparing planned with reconstructed 3D dose distributions delivered to two regions in a patient: the target volume and the nontarget volume receiving at least 10 cGy. In both volumes, the mean dose is compared, while in the nontarget volume, the near-maximum dose (D2) is compared as well. The real-time dosimetry system was tested by irradiating an anthropomorphic phantom with three VMAT plans: a 6 MV head-and-neck treatment plan, a 10 MV rectum treatment plan, and a 10 MV prostate treatment plan. In all plans, two types of serious delivery errors were introduced. The functionality of automatically halting the linac was also implemented and tested. The precomputation time per treatment was ∼180 s/treatment arc, depending on gantry angle resolution. The complete processing of a single portal frame, including dose verification, took

Formal Verification of Real-Time System Requirements

Directory of Open Access Journals (Sweden)

Marcin Szpyrka

2000-01-01

Full Text Available The methodology of system requirements verification presented in this paper is a proposition of a practical procedure for reducing some negatives of the specification of requirements. The main problem that is considered is to create a complete description of the system requirements without any negatives. Verification of the initially defined requirements is based on the coloured Petri nets. Those nets are useful for testing some properties of system requirements such as completeness, consistency and optimality. An example ofthe litt controller is presented.

Integrating watershed hydrology and economics to establish a local market for water quality improvement: A field experiment

Science.gov (United States)

Innovative market mechanisms are being increasingly recognized as effective decision-making institutions to incorporate the value of ecosystem services into the economy. We present a field experiment that integrates an economic auction and a biophysical water flux model to develo...

Finite Countermodel Based Verification for Program Transformation (A Case Study

Directory of Open Access Journals (Sweden)

Alexei P. Lisitsa

2015-12-01

Full Text Available Both automatic program verification and program transformation are based on program analysis. In the past decade a number of approaches using various automatic general-purpose program transformation techniques (partial deduction, specialization, supercompilation for verification of unreachability properties of computing systems were introduced and demonstrated. On the other hand, the semantics based unfold-fold program transformation methods pose themselves diverse kinds of reachability tasks and try to solve them, aiming at improving the semantics tree of the program being transformed. That means some general-purpose verification methods may be used for strengthening program transformation techniques. This paper considers the question how finite countermodels for safety verification method might be used in Turchin's supercompilation method. We extract a number of supercompilation sub-algorithms trying to solve reachability problems and demonstrate use of an external countermodel finder for solving some of the problems.

Learning a Genetic Measure for Kinship Verification Using Facial Images

Directory of Open Access Journals (Sweden)

Lu Kou

2015-01-01

Full Text Available Motivated by the key observation that children generally resemble their parents more than other persons with respect to facial appearance, distance metric (similarity learning has been the dominant choice for state-of-the-art kinship verification via facial images in the wild. Most existing learning-based approaches to kinship verification, however, are focused on learning a genetic similarity measure in a batch learning manner, leading to less scalability for practical applications with ever-growing amount of data. To address this, we propose a new kinship verification approach by learning a sparse similarity measure in an online fashion. Experimental results on the kinship datasets show that our approach is highly competitive to the state-of-the-art alternatives in terms of verification accuracy, yet it is superior in terms of scalability for practical applications.

INTERNATIONAL ASPECTS OF STATE REGULATION OF SOCIO-ECONOMIC RESPONSIBILITY OF ENTREPRENEURSHIP: EXPERIENCE FOR UKRAINE

Directory of Open Access Journals (Sweden)

Ludmila Batchenko

2017-12-01

Full Text Available The subject of the study is the socio-economic aspects of the social responsibility of business (CSR in 4 countries. The purpose of the article is to study the experience in regulating the socio-economic responsibility of entrepreneurship in the United States, Sweden, India, and China to determine the direction of formation of the state mechanism of socio-economic responsibility of entrepreneurship (SERE in Ukraine. The methodology of the article became theoretical researches of foreign scientists, their synthesis, systematization, and analysis for the development of the application of experience in Ukrainian realities. The analysis showed how different states of CSR policy differ in each of these countries and made it possible to draw conclusions about the application in Ukraine. So, the experience of Sweden is useful in reviewing the social reporting obligation, as well as the experience of China. In the case of the USA, the role of the state in regulating CSRs in enterprises should be noted but, at the same time, the significant social consciousness of American entrepreneurs as recognized philanthropists, who are actively introducing ethical codes and key stewards from the implementation of CSR, are seen by society and aimed at improving the well-being of society. In China, the government plays an important role in the implementation of CSR for state-owned enterprises. In addition, laws are adopted to improve the rights of employees, to equalize gender differences, to increase the level of production, quality of products, which leads to an improvement in the quality of life of the country’s population. All this becomes relevant for Ukraine and can be used in our country as well. Indian experience draws attention through the adoption of a unique decision on the indifference of charity activities by Indian companies with a certain level of profit and the adoption of them by the rules of corporate social responsibility. In entrepreneurship

Towards Model Validation and Verification with SAT Techniques

OpenAIRE

Gogolla, Martin

2010-01-01

After sketching how system development and the UML (Unified Modeling Language) and the OCL (Object Constraint Language) are related, validation and verification with the tool USE (UML-based Specification Environment) is demonstrated. As a more efficient alternative for verification tasks, two approaches using SAT-based techniques are put forward: First, a direct encoding of UML and OCL with Boolean variables and propositional formulas, and second, an encoding employing an...

SU-E-J-145: Validation of An Analytical Model for in Vivo Range Verification Using GATE Monte Carlo Simulation in Proton Therapy

International Nuclear Information System (INIS)

Lee, C; Lin, H; Chao, T; Hsiao, I; Chuang, K

2015-01-01

Purpose: Predicted PET images on the basis of analytical filtering approach for proton range verification has been successful developed and validated using FLUKA Monte Carlo (MC) codes and phantom measurements. The purpose of the study is to validate the effectiveness of analytical filtering model for proton range verification on GATE/GEANT4 Monte Carlo simulation codes. Methods: In this study, we performed two experiments for validation of predicted β+-isotope by the analytical model with GATE/GEANT4 simulations. The first experiments to evaluate the accuracy of predicting β+-yields as a function of irradiated proton energies. In second experiment, we simulate homogeneous phantoms of different materials irradiated by a mono-energetic pencil-like proton beam. The results of filtered β+-yields distributions by the analytical model is compared with those of MC simulated β+-yields in proximal and distal fall-off ranges. Results: The results investigate the distribution between filtered β+-yields and MC simulated β+-yields distribution in different conditions. First, we found that the analytical filtering can be applied over the whole range of the therapeutic energies. Second, the range difference between filtered β+-yields and MC simulated β+-yields at the distal fall-off region are within 1.5mm for all materials used. The findings validated the usefulness of analytical filtering model on range verification of proton therapy on GATE Monte Carlo simulations. In addition, there is a larger discrepancy between filtered prediction and MC simulated β+-yields using GATE code, especially in proximal region. This discrepancy might Result from the absence of wellestablished theoretical models for predicting the nuclear interactions. Conclusion: Despite the fact that large discrepancies of the distributions between MC-simulated and predicted β+-yields were observed, the study prove the effectiveness of analytical filtering model for proton range verification using

IP cores design from specifications to production modeling, verification, optimization, and protection

CERN Document Server

Mohamed, Khaled Salah

2016-01-01

This book describes the life cycle process of IP cores, from specification to production, including IP modeling, verification, optimization, and protection. Various trade-offs in the design process are discussed, including  those associated with many of the most common memory cores, controller IPs  and system-on-chip (SoC) buses. Readers will also benefit from the author’s practical coverage of new verification methodologies. such as bug localization, UVM, and scan-chain.  A SoC case study is presented to compare traditional verification with the new verification methodologies. ·         Discusses the entire life cycle process of IP cores, from specification to production, including IP modeling, verification, optimization, and protection; ·         Introduce a deep introduction for Verilog for both implementation and verification point of view.  ·         Demonstrates how to use IP in applications such as memory controllers and SoC buses. ·         Describes a new ver...

VAMOS: The verification and monitoring options study: Current research options for in-situ monitoring and verification of contaminant remediation and containment within the vadose zone

International Nuclear Information System (INIS)

Betsill, J.D.; Gruebel, R.D.

1995-09-01

The Verification and Monitoring Options Study Project (VAMOS) was established to identify high-priority options for future vadose-zone environmental research in the areas of in-situ remediation monitoring, post-closure monitoring, and containment emplacement and verification monitoring. VAMOS examined projected needs not currently being met with applied technology in order to develop viable monitoring and verification research options. The study emphasized a compatible systems approach to reinforce the need for utilizing compatible components to provide user friendly site monitoring systems. To identify the needs and research options related to vadose-zone environmental monitoring and verification, a literature search and expert panel forums were conducted. The search included present drivers for environmental monitoring technology, technology applications, and research efforts. The forums included scientific, academic, industry, and regulatory environmental professionals as well as end users of environmental technology. The experts evaluated current and future monitoring and verification needs, methods for meeting these needs, and viable research options and directions. A variety of high-priority technology development, user facility, and technology guidance research options were developed and presented as an outcome of the literature search and expert panel forums

IVA2 verification: Expansion phase experiment in SNR geometry

International Nuclear Information System (INIS)

Kolev, N.I.

1987-09-01

Using the IVA2/005 computer code the SNR model explosion experiment SGI-09-1 was numerically simulated. The experiment consists of high pressure gas injection into a low pressure liquid pool with a free surface in a cylindrical geometry with internals. Bubble formation and pressure history as a function of time was predicted and compared with the experimental observation. A good agreement between theory and experiment was obtained. Numerical diffusion and its influence on the results are discussed. (orig.) [de

Exploring the Possible Use of Information Barriers for future Biological Weapons Verification Regimes

International Nuclear Information System (INIS)

Luke, S.J.

2011-01-01

This report describes a path forward for implementing information barriers in a future generic biological arms-control verification regime. Information barriers have become a staple of discussion in the area of arms control verification approaches for nuclear weapons and components. Information barriers when used with a measurement system allow for the determination that an item has sensitive characteristics without releasing any of the sensitive information. Over the last 15 years the United States (with the Russian Federation) has led on the development of information barriers in the area of the verification of nuclear weapons and nuclear components. The work of the US and the Russian Federation has prompted other states (e.g., UK and Norway) to consider the merits of information barriers for possible verification regimes. In the context of a biological weapons control verification regime, the dual-use nature of the biotechnology will require protection of sensitive information while allowing for the verification of treaty commitments. A major question that has arisen is whether - in a biological weapons verification regime - the presence or absence of a weapon pathogen can be determined without revealing any information about possible sensitive or proprietary information contained in the genetic materials being declared under a verification regime. This study indicates that a verification regime could be constructed using a small number of pathogens that spans the range of known biological weapons agents. Since the number of possible pathogens is small it is possible and prudent to treat these pathogens as analogies to attributes in a nuclear verification regime. This study has determined that there may be some information that needs to be protected in a biological weapons control verification regime. To protect this information, the study concludes that the Lawrence Livermore Microbial Detection Array may be a suitable technology for the detection of the

Exploring the Possible Use of Information Barriers for future Biological Weapons Verification Regimes

Energy Technology Data Exchange (ETDEWEB)

Luke, S J

2011-12-20

This report describes a path forward for implementing information barriers in a future generic biological arms-control verification regime. Information barriers have become a staple of discussion in the area of arms control verification approaches for nuclear weapons and components. Information barriers when used with a measurement system allow for the determination that an item has sensitive characteristics without releasing any of the sensitive information. Over the last 15 years the United States (with the Russian Federation) has led on the development of information barriers in the area of the verification of nuclear weapons and nuclear components. The work of the US and the Russian Federation has prompted other states (e.g., UK and Norway) to consider the merits of information barriers for possible verification regimes. In the context of a biological weapons control verification regime, the dual-use nature of the biotechnology will require protection of sensitive information while allowing for the verification of treaty commitments. A major question that has arisen is whether - in a biological weapons verification regime - the presence or absence of a weapon pathogen can be determined without revealing any information about possible sensitive or proprietary information contained in the genetic materials being declared under a verification regime. This study indicates that a verification regime could be constructed using a small number of pathogens that spans the range of known biological weapons agents. Since the number of possible pathogens is small it is possible and prudent to treat these pathogens as analogies to attributes in a nuclear verification regime. This study has determined that there may be some information that needs to be protected in a biological weapons control verification regime. To protect this information, the study concludes that the Lawrence Livermore Microbial Detection Array may be a suitable technology for the detection of the

Experimental preparation and verification of quantum money

Science.gov (United States)

Guan, Jian-Yu; Arrazola, Juan Miguel; Amiri, Ryan; Zhang, Weijun; Li, Hao; You, Lixing; Wang, Zhen; Zhang, Qiang; Pan, Jian-Wei

2018-03-01

A quantum money scheme enables a trusted bank to provide untrusted users with verifiable quantum banknotes that cannot be forged. In this work, we report a proof-of-principle experimental demonstration of the preparation and verification of unforgeable quantum banknotes. We employ a security analysis that takes experimental imperfections fully into account. We measure a total of 3.6 ×106 states in one verification round, limiting the forging probability to 10-7 based on the security analysis. Our results demonstrate the feasibility of preparing and verifying quantum banknotes using currently available experimental techniques.

VBMC: a formal verification tool for VHDL programs

International Nuclear Information System (INIS)

Ajith, K.J.; Bhattacharjee, A.K.

2014-01-01

The design of Control and Instrumentation (C and I) systems used in safety critical applications such as nuclear power plants involves partitioning of the overall system functionality into subparts and implementing each subpart in hardware and/or software as appropriate. With increasing use of programmable devices like FPGA, the hardware subsystems are often implemented in Hardware Description Languages (HDL) like VHDL. Since the functional bugs in such hardware subsystems used in safety critical C and I systems have disastrous consequences, it is important to use rigorous reasoning to verify the functionalities of the HDL models. This paper describes an indigenously developed software tool named VBMC (VHDL Bounded Model Checker) for mathematically proving/refuting functional properties of hardware designs described in VHDL. VBMC accepts hardware design as VHDL program file, functional property in PSL, and verification bound (number of cycles of operation) as inputs. It either reports that the design satisfies the functional property for the given verification bound or generates a counter example providing the reason of violation. In case of satisfaction, the proof holds good for the verification bound. VBMC has been used for the functional verification of FPGA based intelligent I/O boards developed at Reactor Control Division, BARC. (author)

VBMC: a formal verification tool for VHDL program

International Nuclear Information System (INIS)

Ajith, K.J.; Bhattacharjee, A.K.

2014-08-01

The design of Control and Instrumentation (C and I) systems used in safety critical applications such as nuclear power plants involves partitioning of the overall system functionality into sub-parts and implementing each sub-part in hardware and/or software as appropriate. With increasing use of programmable devices like FPGA, the hardware subsystems are often implemented in Hardware Description Languages (HDL) like VHDL. Since the functional bugs in such hardware subsystems used in safety critical C and I systems have serious consequences, it is important to use rigorous reasoning to verify the functionalities of the HDL models. This report describes the design of a software tool named VBMC (VHDL Bounded Model Checker). The capability of this tool is in proving/refuting functional properties of hardware designs described in VHDL. VBMC accepts design as a VHDL program file, functional property in PSL, and verification bound (number of cycles of operation) as inputs. It either reports that the design satisfies the functional property for the given verification bound or generates a counterexample providing the reason of violation. In case of satisfaction, the proof holds good for the verification bound. VBMC has been used for the functional verification of FPGA based intelligent I/O boards developed at Reactor Control Division, BARC. (author)

Independent verification: operational phase liquid metal breeder reactors

International Nuclear Information System (INIS)

Bourne, P.B.

1981-01-01

The Fast Flux Test Facility (FFTF) recently achieved 100-percent power and now is in the initial stages of operation as a test reactor. An independent verification program has been established to assist in maintaining stable plant conditions, and to assure the safe operation of the reactor. Independent verification begins with the development of administrative procedures to control all other procedures and changes to the plant configurations. The technical content of the controlling procedures is subject to independent verification. The actual accomplishment of test procedures and operational maneuvers is witnessed by personnel not responsible for operating the plant. Off-normal events are analyzed, problem reports from other operating reactors are evaluated, and these results are used to improve on-line performance. Audits are used to confirm compliance with established practices and to identify areas where individual performance can be improved

Financial Management and Economic Growth: The European Countries Experience

Directory of Open Access Journals (Sweden)

Nuno Carlos LEITÃO

2012-12-01

Full Text Available The purpose of this research is to investigate the impact of financial development on economic growth applied to European Countries. The initial GDP per capita is negatively correlated with growth of real GDP per capita. Our study shows that there is convergence within European Countries for the period 1990-2009. This paper confirms relevant theoretical hypothesis as international trade and saving encourage the economic growth. The inflation has a negative impact on economic growth as previous studies.

TWRS system drawings and field verification

International Nuclear Information System (INIS)

Shepard, D.G.

1995-01-01

The Configuration Management Program combines the TWRS Labeling and O and M drawing and drawing verification programs. The combined program will produce system drawings for systems that are normally operated or have maintenance performed on the system, label individual pieces of equipment for proper identification, even if system drawings are not warranted, and perform verification of drawings that are identified as essential in Tank Farm Essential Drawing Plans. During fiscal year 1994, work was begun to label Tank Farm components and provide user friendly system based drawings for Tank Waste Remediation System (TWRS) operations and maintenance. During the first half of fiscal 1995, the field verification program continued to convert TWRS drawings into CAD format and verify the accuracy based on visual inspections. During the remainder of fiscal year 1995 these efforts will be combined into a single program providing system based drawings and field verification of TWRS equipment and facilities. This combined program for TWRS will include all active systems for tank farms. Operations will determine the extent of drawing and labeling requirements for single shell tanks, i.e. the electrical distribution, HVAC, leak detection, and the radiation monitoring system. The tasks required to meet these objectives, include the following: identify system boundaries or scope for drawing being verified; label equipment/components in the process systems with a unique Equipment Identification Number (EIN) per the TWRS Data Standard; develop system drawings that are coordinated by ''smart'' drawing numbers and/or drawing references as identified on H-14-020000; develop a Master Equipment List (MEL) multi-user data base application which will contain key information about equipment identified in the field; and field verify and release TWRS Operation and Maintenance (O and M) drawings

FIR signature verification system characterizing dynamics of handwriting features

Science.gov (United States)

Thumwarin, Pitak; Pernwong, Jitawat; Matsuura, Takenobu

2013-12-01

This paper proposes an online signature verification method based on the finite impulse response (FIR) system characterizing time-frequency characteristics of dynamic handwriting features. First, the barycenter determined from both the center point of signature and two adjacent pen-point positions in the signing process, instead of one pen-point position, is used to reduce the fluctuation of handwriting motion. In this paper, among the available dynamic handwriting features, motion pressure and area pressure are employed to investigate handwriting behavior. Thus, the stable dynamic handwriting features can be described by the relation of the time-frequency characteristics of the dynamic handwriting features. In this study, the aforesaid relation can be represented by the FIR system with the wavelet coefficients of the dynamic handwriting features as both input and output of the system. The impulse response of the FIR system is used as the individual feature for a particular signature. In short, the signature can be verified by evaluating the difference between the impulse responses of the FIR systems for a reference signature and the signature to be verified. The signature verification experiments in this paper were conducted using the SUBCORPUS MCYT-100 signature database consisting of 5,000 signatures from 100 signers. The proposed method yielded equal error rate (EER) of 3.21% on skilled forgeries.

Learning Online: A Case Study Exploring Student Perceptions and Experience of a Course in Economic Evaluation

Science.gov (United States)

Skordis-Worrall, Jolene; Haghparast-Bidgoli, Hassan; Batura, Neha; Hughes, Jane

2015-01-01

This study explored the perceptions and experiences of a group of students enrolled in an online course in Economic Evaluation. A mixed methods approach was adopted for the data collection, and thematic analysis was used to synthesize the data collected and highlight key findings. The participants identified several positive and negative perceived…

Economic Development in Afghanistan during the Soviet Period, 1979-1989: Lessons Learned from the Soviet Experience in Afghanistan

Science.gov (United States)

2007-08-01

gouvernement afghan. Les auteurs de l’étude concluent que l’accent sur la sécurité en Afghanistan a été préjudiciable à un développement économique...Afghanistan (PDPA) regime were largely influenced by Soviet economic theory and experience. In addition to adopting economic planning based on the five...rural Afghans. On peasant in Leninist theory see Esther Kingston-Mann, “Proletarian Theory and Peasant Practice: Lenin 1901-1904,” in Soviet Studies

CATS Deliverable 5.1 : CATS verification of test matrix and protocol

OpenAIRE

Uittenbogaard, J.; Camp, O.M.G.C. op den; Montfort, S. van

2016-01-01

This report summarizes the work conducted within work package (WP) 5 "Verification of test matrix and protocol" of the Cyclist AEB testing system (CATS) project. It describes the verification process of the draft CATS test matrix resulting from WP1 and WP2, and the feasibility of meeting requirements set by CATS consortium based on requirements in Euro NCAP AEB protocols regarding accuracy, repeatability and reproducibility using the developed test hardware. For the cases where verification t...

Formal verification of industrial control systems

CERN Multimedia

CERN. Geneva

2015-01-01

Verification of critical software is a high priority but a challenging task for industrial control systems. For many kinds of problems, testing is not an efficient method. Formal methods, such as model checking appears to be an appropriate complementary method. However, it is not common to use model checking in industry yet, as this method needs typically formal methods expertise and huge computing power. In the EN-ICE-PLC section, we are working on a [methodology][1] and a tool ([PLCverif][2]) to overcome these challenges and to integrate formal verification in the development process of our PLC-based control systems. [1]: http://cern.ch/project-plc-formalmethods [2]: http://cern.ch/plcverif

Focussed approach to verification under FMCT

International Nuclear Information System (INIS)

Bragin, V.; Carlson, J.; Bardsley, J.; Hill, J.

1998-01-01

FMCT will have different impacts on individual states due to the enormous variance in their nuclear fuel cycles and the associated fissile material inventories. The problem is how to negotiate a treaty that would achieve results favourable for all participants, given that interests and priorities vary so much. We believe that focussed verification, confined to safeguarding of enrichment and reprocessing facilities in NWS and TS, coupled with verification of unirradiated direct-use material produced after entry-into-force of a FMCT and supported with measures to detect possible undeclared enrichment and reprocessing activities, is technically adequate for the FMCT. Eventually this would become the appropriate model for all states party to the NPT

Economic Programmes and Poverty Reduction: NGO Experiences from Tamil Nadu

OpenAIRE

D Rajasekhar; P Shobana

2000-01-01

The impact of economic programmes of SHARE, an NGO from Tamil Nadu, on poverty reduction is analysed with the help of data from 84 hosueholds. The economic programmes contributed to savings and income increase, and enhanced the leadership qualities, awareness and knowledge. The member group is not significantly different from the comparison group in terms of control over income and decision-making. This suggests that the NGO economic programmes have limitation is bringing about non-economic b...

Isotope correlation verification of analytical measurements for dissolver materials

International Nuclear Information System (INIS)

Satkowski, J.

1988-01-01

An independent verification of analytical results for accountability measurements of dissolver materials can be performed using the Iosotop Correlation Technique (ICT). ICT is based on the relationships that exist between the initial and final elemental concentration and isotopic abundances of the nuclear fuel. Linear correlation functions between isotopic ratios and plutonium/uranium ratios have been developed for specific reactor fuels. The application of these correlations to already existing analytical data provides a laboratory additional confidence in the reported results. Confirmation is done by a test of consistancy with historical data. ICT is being utilized with dissolver accountability measurements at the Savannah River Plant Laboratory. The application, implementation, and operating experience of this technique are presented

Formal Development and Verification of a Distributed Railway Control System

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth; Peleska, Jan

1999-01-01

In this article we introduce the concept for a distributed railway control system and present the specification and verification of the main algorithm used for safe distributed control. Our design and verification approach is based on the RAISE method, starting with highly abstract algebraic...

Formal Development and Verification of a Distributed Railway Control System

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth; Peleska, Jan

1998-01-01

In this article we introduce the concept for a distributed railway control system and present the specification and verification of the main algorithm used for safe distributed control. Our design and verification approach is based on the RAISE method, starting with highly abstract algebraic spec...

Time-space modal logic for verification of bit-slice circuits

Science.gov (United States)

Hiraishi, Hiromi

1996-03-01

The major goal of this paper is to propose a new modal logic aiming at formal verification of bit-slice circuits. The new logic is called as time-space modal logic and its major feature is that it can handle two transition relations: one for time transition and the other for space transition. As for a verification algorithm, a symbolic model checking algorithm of the new logic is shown. This could be applicable to verification of bit-slice microprocessor of infinite bit width and 1D systolic array of infinite length. A simple benchmark result shows the effectiveness of the proposed approach.

SoC Design Approach Using Convertibility Verification

Directory of Open Access Journals (Sweden)

Basu Samik

2008-01-01

Full Text Available Abstract Compositional design of systems on chip from preverified components helps to achieve shorter design cycles and time to market. However, the design process is affected by the issue of protocol mismatches, where two components fail to communicate with each other due to protocol differences. Convertibility verification, which involves the automatic generation of a converter to facilitate communication between two mismatched components, is a collection of techniques to address protocol mismatches. We present an approach to convertibility verification using module checking. We use Kripke structures to represent protocols and the temporal logic to describe desired system behavior. A tableau-based converter generation algorithm is presented which is shown to be sound and complete. We have developed a prototype implementation of the proposed algorithm and have used it to verify that it can handle many classical protocol mismatch problems along with SoC problems. The initial idea for -based convertibility verification was presented at SLA++P '07 as presented in the work by Roopak Sinha et al. 2008.

Survey of Verification and Validation Techniques for Small Satellite Software Development

Science.gov (United States)

Jacklin, Stephen A.

2015-01-01

The purpose of this paper is to provide an overview of the current trends and practices in small-satellite software verification and validation. This document is not intended to promote a specific software assurance method. Rather, it seeks to present an unbiased survey of software assurance methods used to verify and validate small satellite software and to make mention of the benefits and value of each approach. These methods include simulation and testing, verification and validation with model-based design, formal methods, and fault-tolerant software design with run-time monitoring. Although the literature reveals that simulation and testing has by far the longest legacy, model-based design methods are proving to be useful for software verification and validation. Some work in formal methods, though not widely used for any satellites, may offer new ways to improve small satellite software verification and validation. These methods need to be further advanced to deal with the state explosion problem and to make them more usable by small-satellite software engineers to be regularly applied to software verification. Last, it is explained how run-time monitoring, combined with fault-tolerant software design methods, provides an important means to detect and correct software errors that escape the verification process or those errors that are produced after launch through the effects of ionizing radiation.

A silicon strip detector array for energy verification and quality assurance in heavy ion therapy.

Science.gov (United States)

Debrot, Emily; Newall, Matthew; Guatelli, Susanna; Petasecca, Marco; Matsufuji, Naruhiro; Rosenfeld, Anatoly B

2018-02-01

The measurement of depth dose profiles for range and energy verification of heavy ion beams is an important aspect of quality assurance procedures for heavy ion therapy facilities. The steep dose gradients in the Bragg peak region of these profiles require the use of detectors with high spatial resolution. The aim of this work is to characterize a one dimensional monolithic silicon detector array called the "serial Dose Magnifying Glass" (sDMG) as an independent ion beam energy and range verification system used for quality assurance conducted for ion beams used in heavy ion therapy. The sDMG detector consists of two linear arrays of 128 silicon sensitive volumes each with an effective size of 2mm × 50μm × 100μm fabricated on a p-type substrate at a pitch of 200 μm along a single axis of detection. The detector was characterized for beam energy and range verification by measuring the response of the detector when irradiated with a 290 MeV/u 12 C ion broad beam incident along the single axis of the detector embedded in a PMMA phantom. The energy of the 12 C ion beam incident on the detector and the residual energy of an ion beam incident on the phantom was determined from the measured Bragg peak position in the sDMG. Ad hoc Monte Carlo simulations of the experimental setup were also performed to give further insight into the detector response. The relative response profiles along the single axis measured with the sDMG detector were found to have good agreement between experiment and simulation with the position of the Bragg peak determined to fall within 0.2 mm or 1.1% of the range in the detector for the two cases. The energy of the beam incident on the detector was found to vary less than 1% between experiment and simulation. The beam energy incident on the phantom was determined to be (280.9 ± 0.8) MeV/u from the experimental and (280.9 ± 0.2) MeV/u from the simulated profiles. These values coincide with the expected energy of 281 MeV/u. The sDMG detector

Practical experience with a local verification system for containment and surveillance sensors

International Nuclear Information System (INIS)

Lauppe, W.D.; Richter, B.; Stein, G.

1984-01-01

With the growing number of nuclear facilities and a number of large commercial bulk handling facilities steadily coming into operation the International Atomic Energy Agency is faced with increasing requirements as to reducing its inspection efforts. One means of meeting these requirements will be to deploy facility based remote interrogation methods for its containment and surveillance instrumentation. Such a technical concept of remote interrogation was realized through the so-called LOVER system development, a local verification system for electronic safeguards seal systems. In the present investigations the application was extended to radiation monitoring by introducing an electronic interface between the electronic safeguards seal and the neutron detector electronics of a waste monitoring system. The paper discusses the safeguards motivation and background, the experimental setup of the safeguards system and the performance characteristics of this LOVER system. First conclusions can be drawn from the performance results with respect to the applicability in international safeguards. This comprises in particular the definition of design specifications for an integrated remote interrogation system for various types of containment and surveillance instruments and the specifications of safeguards applications employing such a system

Economic impacts of the S.S. Glacier Bay oil spill: Social and economic studies. Technical report (Final)

International Nuclear Information System (INIS)

Burden, P.; Isaacs, J.; Richardson, J.; Braund, S.; Witten, E.

1990-11-01

On July 2, 1987, an oil spill occurred in Cook Inlet when the S.S. Glacier Bay hit a submerged obstacle while enroute to Kenai Pipeline Company facilities to offload oil. The 1987 commercial fishery in Cook Inlet was barely underway when the S.S. Glacier Bay oil spill occurred, and the largest salmon return in history was moving up the inlet. The sockeye salmon run alone totaled over 12 million, providing a seasonal catch of 9.25 million salmon. The 1987 sport fishery in Cook Inlet was in mid-season at the time of the spill. The S.S. Glacier Bay oil spill represents an opportunity to study the economic impacts of an oil spill event in Alaska, particularly with regard to commercial fishing impacts and the public costs of cleanup. The report evaluates the existing information on the spill, response measures, and economic impacts, and adds discussions with individuals and groups involved in or affected by the spill to this data base. The report reviewed accounts of the oil spill and its costs; identified types and sources of data, developed protocol, and contacted groups and people for data collection and verification; and described, analyzed, and prepared reports of the economic effects of the S.S. Glacier Bay oil spill

Using SysML for verification and validation planning on the Large Synoptic Survey Telescope (LSST)

Science.gov (United States)

Selvy, Brian M.; Claver, Charles; Angeli, George

2014-08-01

This paper provides an overview of the tool, language, and methodology used for Verification and Validation Planning on the Large Synoptic Survey Telescope (LSST) Project. LSST has implemented a Model Based Systems Engineering (MBSE) approach as a means of defining all systems engineering planning and definition activities that have historically been captured in paper documents. Specifically, LSST has adopted the Systems Modeling Language (SysML) standard and is utilizing a software tool called Enterprise Architect, developed by Sparx Systems. Much of the historical use of SysML has focused on the early phases of the project life cycle. Our approach is to extend the advantages of MBSE into later stages of the construction project. This paper details the methodology employed to use the tool to document the verification planning phases, including the extension of the language to accommodate the project's needs. The process includes defining the Verification Plan for each requirement, which in turn consists of a Verification Requirement, Success Criteria, Verification Method(s), Verification Level, and Verification Owner. Each Verification Method for each Requirement is defined as a Verification Activity and mapped into Verification Events, which are collections of activities that can be executed concurrently in an efficient and complementary way. Verification Event dependency and sequences are modeled using Activity Diagrams. The methodology employed also ties in to the Project Management Control System (PMCS), which utilizes Primavera P6 software, mapping each Verification Activity as a step in a planned activity. This approach leads to full traceability from initial Requirement to scheduled, costed, and resource loaded PMCS task-based activities, ensuring all requirements will be verified.

Empowering rural women's groups for strengthening economic linkages: some Indian experiments.

Science.gov (United States)

Rajagopal

1999-05-01

Through organizing informal self-help groups (SHGs), rural women in India are provided credit and extension support for various production-oriented income-generating activities. These activities usually include garment-making, embroidery, food processing, bee-keeping, basketry, gem cutting, weaving, and knitting. SHGs are self-governed, with decisions about production and marketing taken collectively, although the group leader is responsible for identifying potential marketing centers and consumers. These groups represent a new culture in rural development, breaking with traditional bureaucracy and top-down management. Informal groups empower rural women to manage rural industries and make decisions collectively for their common economic interests. Experience with SHGs in Orissa, lessons from nongovernmental organization intervention, and a model for empowering poor people in a small town in Kerala are discussed.

Experimental verification of dynamic radioecological models established after the Chernobyl reactor accident

International Nuclear Information System (INIS)

Voigt, G.; Mueller, H.; Proehl, G.; Stocke, H.; Paretzke, H.G.

1991-01-01

The experiments reported were carried out for a verification of existing, dynamic radioecological models, especially of the ECOSYS model. The database used for the verification covers the radioactivity concentrations of Cs-134, Cs-137, I-131 measured after the Chernobyl reactor accident in foodstuffs and environmental samples, the results of field experiments on radionuclide translocation after foliar uptake or absorption by the roots of edible plants. The measured data were compared with the model predictions for the radionuclides under review. The Cs-134 and Cs-137 translocation factors which describe the redistribution of these radionuclides in the plant after foliar uptake were experimentally determined by a single sprinkling with Chernobyl rainwater, and were measured to be the following as a function of sprinkling time: winter wheat, 0.002-0.13; spring wheat, 0.003-0.09; winter rye, 0.002-0.27; barley, 0.002-0.04; potatoes, 0.05-0.35; carrots, 0.02-0.07; bush beans, 0.04-0.3; cabbage, 0.1-0.5. The weathering half-life of the radionuclides in lettuce was determined to be ten days. Transfer factors determined for root absorption of Cs-137 were measured to be an average of 0.002 for grains, 0.002 for potatoes, 0.004 for white cabbage, 0.003 for bush beans and carrots, and 0.007 for lettuce. There was an agreement between the ECOSYS model predictions and the measured radioactivity concentrations of the corresponding radionuclides. (orig./HP) [de

Validation and verification plan for safety and PRA codes

International Nuclear Information System (INIS)

Ades, M.J.; Crowe, R.D.; Toffer, H.

1991-04-01

This report discusses a verification and validation (V ampersand V) plan for computer codes used for safety analysis and probabilistic risk assessment calculations. The present plan fulfills the commitments by Westinghouse Savannah River Company (WSRC) to the Department of Energy Savannah River Office (DOE-SRO) to bring the essential safety analysis and probabilistic risk assessment codes in compliance with verification and validation requirements

Verification of a CT scanner using a miniature step gauge

DEFF Research Database (Denmark)

Cantatore, Angela; Andreasen, J.L.; Carmignato, S.

2011-01-01

The work deals with performance verification of a CT scanner using a 42mm miniature replica step gauge developed for optical scanner verification. Errors quantification and optimization of CT system set-up in terms of resolution and measurement accuracy are fundamental for use of CT scanning...

Trends in business process analysis: from verification to process mining

NARCIS (Netherlands)

Aalst, van der W.M.P.; Cardoso, J.; Cordeiro, J.; Filipe, J.

2007-01-01

Business process analysis ranges from model verification at design-time to the monitoring of processes at runtime. Much progress has been achieved in process verification. Today we are able to verify the entire reference model of SAP without any problems. Moreover, more and more processes leave

DOE handbook: Integrated safety management systems (ISMS) verification. Team leader's handbook

International Nuclear Information System (INIS)

1999-06-01

The primary purpose of this handbook is to provide guidance to the ISMS verification Team Leader and the verification team in conducting ISMS verifications. The handbook describes methods and approaches for the review of the ISMS documentation (Phase I) and ISMS implementation (Phase II) and provides information useful to the Team Leader in preparing the review plan, selecting and training the team, coordinating the conduct of the verification, and documenting the results. The process and techniques described are based on the results of several pilot ISMS verifications that have been conducted across the DOE complex. A secondary purpose of this handbook is to provide information useful in developing DOE personnel to conduct these reviews. Specifically, this handbook describes methods and approaches to: (1) Develop the scope of the Phase 1 and Phase 2 review processes to be consistent with the history, hazards, and complexity of the site, facility, or activity; (2) Develop procedures for the conduct of the Phase 1 review, validating that the ISMS documentation satisfies the DEAR clause as amplified in DOE Policies 450.4, 450.5, 450.6 and associated guidance and that DOE can effectively execute responsibilities as described in the Functions, Responsibilities, and Authorities Manual (FRAM); (3) Develop procedures for the conduct of the Phase 2 review, validating that the description approved by the Approval Authority, following or concurrent with the Phase 1 review, has been implemented; and (4) Describe a methodology by which the DOE ISMS verification teams will be advised, trained, and/or mentored to conduct subsequent ISMS verifications. The handbook provides proven methods and approaches for verifying that commitments related to the DEAR, the FRAM, and associated amplifying guidance are in place and implemented in nuclear and high risk facilities. This handbook also contains useful guidance to line managers when preparing for a review of ISMS for radiological

Verification and validation as an integral part of the development of digital systems for nuclear applications

International Nuclear Information System (INIS)

Straker, E.A.; Thomas, N.C.

1983-01-01

The nuclear industry's current attitude toward verification and validation (V and V) is realized through the experiences gained to date. On the basis of these experiences, V and V can effectively be applied as an integral part of digital system development for nuclear electric power applications. An overview of a typical approach for integrating V and V with system development is presented. This approach represents a balance between V and V as applied in the aerospace industry and the standard practice commonly applied within the nuclear industry today

Knowledge base verification based on enhanced colored petri net

Energy Technology Data Exchange (ETDEWEB)

Kim, Jong Hyun; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1998-12-31

Verification is a process aimed at demonstrating whether a system meets it`s specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base and apply the method to verification of simple knowledge base. 8 refs., 4 figs. (Author)

Knowledge base verification based on enhanced colored petri net

Energy Technology Data Exchange (ETDEWEB)

Kim, Jong Hyun; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1997-12-31

Verification is a process aimed at demonstrating whether a system meets it`s specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base and apply the method to verification of simple knowledge base. 8 refs., 4 figs. (Author)

Neighbors Based Discriminative Feature Difference Learning for Kinship Verification

DEFF Research Database (Denmark)

Duan, Xiaodong; Tan, Zheng-Hua

2015-01-01

In this paper, we present a discriminative feature difference learning method for facial image based kinship verification. To transform feature difference of an image pair to be discriminative for kinship verification, a linear transformation matrix for feature difference between an image pair...... than the commonly used feature concatenation, leading to a low complexity. Furthermore, there is no positive semi-definitive constrain on the transformation matrix while there is in metric learning methods, leading to an easy solution for the transformation matrix. Experimental results on two public...... databases show that the proposed method combined with a SVM classification method outperforms or is comparable to state-of-the-art kinship verification methods. © Springer International Publishing AG, Part of Springer Science+Business Media...

Bibliography for Verification and Validation in Computational Simulation

International Nuclear Information System (INIS)

Oberkampf, W.L.

1998-01-01

A bibliography has been compiled dealing with the verification and validation of computational simulations. The references listed in this bibliography are concentrated in the field of computational fluid dynamics (CFD). However, references from the following fields are also included: operations research, heat transfer, solid dynamics, software quality assurance, software accreditation, military systems, and nuclear reactor safety. This bibliography, containing 221 references, is not meant to be comprehensive. It was compiled during the last ten years in response to the author's interest and research in the methodology for verification and validation. The emphasis in the bibliography is in the following areas: philosophy of science underpinnings, development of terminology and methodology, high accuracy solutions for CFD verification, experimental datasets for CFD validation, and the statistical quantification of model validation. This bibliography should provide a starting point for individual researchers in many fields of computational simulation in science and engineering

Bibliography for Verification and Validation in Computational Simulations

Energy Technology Data Exchange (ETDEWEB)

Oberkampf, W.L.

1998-10-01

A bibliography has been compiled dealing with the verification and validation of computational simulations. The references listed in this bibliography are concentrated in the field of computational fluid dynamics (CFD). However, references from the following fields are also included: operations research, heat transfer, solid dynamics, software quality assurance, software accreditation, military systems, and nuclear reactor safety. This bibliography, containing 221 references, is not meant to be comprehensive. It was compiled during the last ten years in response to the author's interest and research in the methodology for verification and validation. The emphasis in the bibliography is in the following areas: philosophy of science underpinnings, development of terminology and methodology, high accuracy solutions for CFD verification, experimental datasets for CFD validation, and the statistical quantification of model validation. This bibliography should provide a starting point for individual researchers in many fields of computational simulation in science and engineering.

Is identity per se irrelevant? A contrarian view of self-verification effects

OpenAIRE

Gregg, Aiden P.

2008-01-01

Self-verification theory (SVT) posits that people who hold negative self-views, such as depressive patients, ironically strive to verify that these self-views are correct, by actively seeking out critical feedback or interaction partners who evaluate them unfavorably. Such verification strivings are allegedly directed towards maximizing subjective perceptions of prediction and control. Nonetheless, verification strivings are also alleged to stabilize maladaptive self-perceptions, and thereby ...

SWAAM code development, verification and application to steam generator design

International Nuclear Information System (INIS)

Shin, Y.W.; Valentin, R.A.

1990-01-01

This paper describes the family of SWAAM codes developed by Argonne National Laboratory to analyze the effects of sodium/water reactions on LMR steam generators. The SWAAM codes were developed as design tools for analyzing various phenomena related to steam generator leaks and to predict the resulting thermal and hydraulic effects on the steam generator and the intermediate heat transport system (IHTS). The theoretical foundations and numerical treatments on which the codes are based are discussed, followed by a description of code capabilities and limitations, verification of the codes by comparison with experiment, and applications to steam generator and IHTS design. (author). 25 refs, 14 figs

Verification of consumers' experiences and perceptions of genetic discrimination and its impact on utilization of genetic testing.

Science.gov (United States)

Barlow-Stewart, Kristine; Taylor, Sandra D; Treloar, Susan A; Stranger, Mark; Otlowski, Margaret

2009-03-01

To undertake a systematic process of verification of consumer accounts of alleged genetic discrimination. Verification of incidents reported in life insurance and other contexts that met the criteria of genetic discrimination, and the impact of fear of such treatment, was determined, with consent, through interview, document analysis and where appropriate, direct contact with the third party involved. The process comprised obtaining evidence that the alleged incident was accurately reported and determining whether the decision or action seemed to be justifiable and/or ethical. Reported incidents of genetic discrimination were verified in life insurance access, underwriting and coercion (9), applications for worker's compensation (1) and early release from prison (1) and in two cases of fear of discrimination impacting on access to genetic testing. Relevant conditions were inherited cancer susceptibility (8), Huntington disease (3), hereditary hemochromatosis (1), and polycystic kidney disease (1). In two cases, the reversal of an adverse underwriting decision to standard rate after intervention with insurers by genetics health professionals was verified. The mismatch between consumer and third party accounts in three life insurance incidents involved miscommunication or lack of information provision by financial advisers. These first cases of verified genetic discrimination make it essential for policies and guidelines to be developed and implemented to ensure appropriate use of genetic test results in insurance underwriting, to promote education and training in the financial industry, and to provide support for consumers and health professionals undertaking challenges of adverse decisions.

Core power capability verification for PWR NPP

International Nuclear Information System (INIS)

Xian Chunyu; Liu Changwen; Zhang Hong; Liang Wei

2002-01-01

The Principle and methodology of pressurized water reactor nuclear power plant core power capability verification for reload are introduced. The radial and axial power distributions of normal operation (category I or condition I) and abnormal operation (category II or condition II) are simulated by using neutronics calculation code. The linear power density margin and DNBR margin for both categories, which reflect core safety, are analyzed from the point view of reactor physics and T/H, and thus category I operating domain and category II protection set point are verified. Besides, the verification results of reference NPP are also given

Data Exchanges and Verifications Online (DEVO)

Data.gov (United States)

Social Security Administration — DEVO is the back-end application for processing SSN verifications and data exchanges. DEVO uses modern technology for parameter driven processing of both batch and...

Operational strategy, economic and environmental performance of sludge treatment reed bed systems - based on 28 years of experience

DEFF Research Database (Denmark)

Nielsen, S.; Larsen, Julie Dam

2016-01-01

Sludge treatment reed bed (STRB) systems have been used for dewatering and mineralisation of sludge in Europe since 1988. STRB systems provide substantial environmental, economic, and operational benefits compared to mechanical sludge dewatering solutions such as belt presses and centrifuges....... They require less energy, no chemicals, reduce the sludge volume and produce bio solids with dry solid contents up to 20-40% under Danish climate conditions, depending on the sludge quality. Experience has shown that sludge treated in STRBs represents a high quality product with a low content of pathogens...... compared to conventional mechanical dewatering devices, delivering an economic break-even of about 3-5 years. This paper provides an overview of the operation and maintenance costs and environmental benefits of a typical STRB based on the experiences gained from the operation of a large number of STRBs...