Who needs cream and sugar when there is eco-labeling? Taste and willingness to pay for "eco-friendly" coffee.

Directory of Open Access Journals (Sweden)

Patrik Sörqvist

Full Text Available Participants tasted two cups of coffee, decided which they preferred, and then rated each coffee. They were told (in lure that one of the cups contained "eco-friendly" coffee while the other did not, although the two cups contained identical coffee. In Experiments 1 and 3, but not in Experiment 2, the participants were also told which cup contained which type of coffee before they tasted. The participants preferred the taste of, and were willing to pay more for, the "eco-friendly" coffee, at least those who scored high on a questionnaire on attitudes toward sustainable consumer behavior (Experiment 1. High sustainability consumers were also willing to pay more for "eco-friendly" coffee, even when they were told, after their decision, that they preferred the non-labeled alternative (Experiment 2. Moreover, the eco-label effect does not appear to be a consequence of social desirability, as participants were just as biased when reporting the taste estimates and willingness to pay anonymously (Experiment 3. Eco labels not only promote a willingness to pay more for the product but also lead to a more favorable perceptual experience of it.

Roll forming of eco-friendly stud

Science.gov (United States)

Keum, Y. T.; Lee, S. Y.; Lee, T. H.; Sim, J. K.

2013-12-01

In order to manufacture an eco-friendly stud, the sheared pattern is designed by the Taguchi method and expanded by the side rolls. The seven geometrical shape of sheared pattern are considered in the structural and thermal analyses to select the best functional one in terms of the durability and fire resistance of dry wall. For optimizing the size of the sheared pattern chosen, the L9 orthogonal array and smaller-the-better characteristics of the Taguchi method are used. As the roll gap causes forming defects when the upper-and-lower roll type is adopted for expanding the sheared pattern, the side roll type is introduced. The stress and strain distributions obtained by the FEM simulation of roll-forming processes are utilized for the design of expanding process. The expanding process by side rolls shortens the length of expanding process and minimizes the cost of dies. Furthermore, the stud manufactured by expanding the sheared pattern of the web is an eco-friend because of the scrapless roll-forming process. In addition, compared to the conventionally roll-formed stud, the material cost is lessened about 13.6% and the weight is lightened about 15.5%.

Eco-friendly polymer nanocomposites processing and properties

CERN Document Server

Thakur, Vijay Kumar

2015-01-01

This book contains precisely referenced chapters, emphasizing environment-friendly polymer nanocomposites with basic fundamentals, practicality and alternatives to traditional nanocomposites through detailed reviews of different environmental friendly materials procured from different resources, their synthesis and applications using alternative green approaches. The book aims at explaining basics of eco-friendly polymer nanocomposites from different natural resources and their chemistry along with practical applications which present a future direction in the biomedical, pharmaceutical and automotive industry. The book attempts to present emerging economic and environmentally friendly polymer nanocomposites that are free from side effects studied in the traditional nanocomposites. This book is the outcome of contributions by many experts in the field from different disciplines, with various backgrounds and expertises. This book will appeal to researchers as well as students from different disciplines. The co...

CAD Instructor Designs Eco-Friendly Shed

Science.gov (United States)

Schwendau, Mark

2013-01-01

Dissatisfied with the options offered by big box stores--and wanting to save some money and go as green as possible--the author puts his design and construction skills to good use. In this article, he shares how he designed and built an eco-friendly shed. He says he is very pleased with the results of working with his own design, reducing waste,…

A STUDY ON FACTORS AFFECTING BUYING BEHAVIOUR OF CONSUMERS FOR ECO - FRIENDLY PRODUCTS

OpenAIRE

N. Anil Kumar; Dr. Mridanish Jha

2017-01-01

Products are not the only thing which can be eco-friendly and actions are also friendly to the environment. Several people think that eco-friendly products are only the first step, and that people who are actually dedicated to the environment also need to change their lifestyles, diminishing the quantum of resources they use by living more competently. The exploratory factor analysis shows that price, quality, value, trust and easy to use are the factors that affecting buying behaviour of con...

Policies and Strategies for Eco-Friendly Dairy Product

NARCIS (Netherlands)

Ziggers, G.W.; Conte, F.; Del Nobile, M.A.; Faccia, M.; Zambrini, A.V.; Conte, A.

2017-01-01

Despite the growing interest in, and market for, eco-friendly dairy production, a large-scale transition is not taking place. This is partly explained by the institutional context, since dairy production is organized in supply chains that generate interdependencies and, in turn, are subject to

Analisa Perbedaan Eco-friendly Attitude Dan Eco-friendly Intention Antara Turis Lokal Dan Turis Asing Terhadap Green

OpenAIRE

Jokom, Regina; Kristanti, Monika

2014-01-01

The increasing concern for environmental degradation caused many people to pay more attention to the green practice in the industry including hotel. Majority of hotel chains have adopted environmental programs and labeled as green hotel. This study examines the significant differences between local tourist and foreign tourist regarding ecofriendly attitude and eco-friendly intention toward green hotel. Questionnaires were distributed to 120 localtourists and 120 foreign tourists In Juanda...

Awareness of Eco-Friendly Dentistry among Dental Faculty and Students of King Khalid University, Saudi Arabia.

Science.gov (United States)

Al-Qarni, Mohammed A; Shakeela, Nasim Vahid; Alamri, Mohammed Abdullah; Alshaikh, Yahya A

2016-10-01

Eco-friendly or green dentistry can be a reality by effectively designing dental clinics and using more eco-friendly materials in the clinical practice. To determine the awareness of eco-friendly dentistry among dental faculty and students in preparation for future implementation. Assessment of knowledge regarding eco-friendly dentistry was done using an 18 item self-administered questionnaire among 160 participants. After baseline data collection, the intervention was done by educating participants with a power point presentation. The post-intervention data was then collected for analysis. Statistical analysis was done using Wilcoxon's signed rank test and one-way ANOVA. The educational intervention increased the knowledge about eco-friendly dentistry confirming the importance of continuing education. There was a statistically significant gain in knowledge among the participants after the presentation. The gain was highest for department of Preventive Dental Sciences (PDS) followed by Substitute Dental Sciences (SDS), No specialty, Maxillofacial Dental Sciences (MDS), and Restorative Dental Sciences (RDS) respectively. (F=5.5091, p<0.05). Lack of knowledge of green dentistry amongst the dental fraternity is highly prevailing. The same can be substantiated with effective training in the respective fields if channelized through the curriculum in an educational set-up.

arXiv Candidate eco-friendly gas mixtures for MPGDs

CERN Document Server

Benussi, L.; Saviano, G.; Muhammad, S.; Ferrini, M.; Primavera, F.; Parvis, M.; Grassing, S.; Colafranceschi, S.; Kjøbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.

2018-01-01

Modern gas detectors for detection of particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This review studies properties of potential eco-friendly gas candidate replacements.

Eco-friendly Retail Product Attributes, Customer Attributes and the Repurchase Intentions of South African Consumers

OpenAIRE

Job Dubihlela; Tandiswa Ngxukumeshe

2016-01-01

Purpose –Consumers are becoming progressively aware of the significance of eco-friendly activities, and their environmental consciousness drives them to consume eco-friendly products and services more, and prefer to support organisations that favor conservational practices. Increased environmental impacts bring a rise in concerns locally and globally, on sustainability issues aimed at reducing non-conservative consumption patterns. Retail organisations are increasingly developing and marketin...

Enabling Eco-Friendly Choices by Relying on the Proportional-Thinking Heuristic

Directory of Open Access Journals (Sweden)

Cleotilde Gonzalez

2013-01-01

Full Text Available Ecological (eco taxes are promising mechanisms to enable eco-friendly decisions, but few people prefer them. In this study, we present a way in which eco-tax options may be communicated to general public to encourage their payment. Our implementation (called “information presentation” takes advantage of the non-linear relationship between eco-tax payments and CO2 emissions and the human reliance on the proportional-thinking heuristic. According to the proportional-thinking heuristic, people are likely to prefer a small eco-tax increase and judge larger eco-tax increases to cause proportionally greater CO2 emissions reductions. In an online study, participants were asked to choose between eco-tax increases in two problems: In one, a smaller eco-tax increase resulted in greater CO2 emissions reduction, while in the other, a smaller tax increase resulted in lesser CO2 emissions reduction. Although the larger eco-tax increase did not reduce CO2 emissions the most, across both problems, people judged larger eco-tax increases to cause proportionally greater reductions in CO2 emissions and preferred smaller tax increases. Thus, eco-tax policies would benefit by presenting information in terms of eco-tax increases, such that smaller eco-tax increases (which are more attractive and are likely to be chosen by people cause greater CO2 emissions reductions.

A New, Eco-Friendly Method for Iodination of Activated Arenes

Directory of Open Access Journals (Sweden)

R. Sathiyapriya

2006-01-01

Full Text Available An effective, eco-friendly method for iodination of arenes is presented. The reaction of activated aromatics with a mixture of sodium iodate and sodium sulphite in the presence of hydrochloric acid gives mono iodoarenes in high yields.

Facile, eco-friendly, catalyst-free synthesis of polyfunctionalized quinoxalines.

Science.gov (United States)

Zhang, Yaohong; Luo, Mengqiang; Li, Yan; Wang, Hai; Ren, Xiaorong; Qi, Chenze

2018-02-01

A novel, facile and eco-friendly synthesis of quinoxalines from [Formula: see text] and 1,2-diamines was developed. An attractive feature of this protocol is that the desired products could be generated efficiently in water and without any catalyst, which is in accordance with the aim of green chemistry. A plausible mechanism has been proposed.

Green dentistry, a metamorphosis towards an eco-friendly dentistry: a short communication.

Science.gov (United States)

Rastogi, Varun; Sharma, Rachna; Yadav, Lalita; Satpute, Pranali; Sharma, Vandana

2014-07-01

Dentistry is most importantly and foremost a healing profession. In today's world, it is very necessary to understand the importance of being eco-friendly in every facet of our lives, including dental practice which has a huge impact on the environment due to the large amount of metallic waste generated by various dental procedures along with excessive use of water and electricity, which specifically emphasis the thrust to move towards 'Green dentistry'. Green dentistry is an innovative way of dental practice which is environment friendly and at the same time conserves money and time by reducing waste, conserving energy and decreasing pollution with the use of latest techniques and procedures. Green dentistry therefore, protects the environment and mankind from the hazards of rapid urbanisation in developing countries. The authors wish to emphasize the practice of eco-friendly, green dentistry in a developing country like India which needs to conserve resources and curb environmental pollution.

An experimental investigation on mechanical behaviour of eco - friendly concrete

Science.gov (United States)

Narender Reddy, A.; Meena, T.

2017-11-01

Fly ash (FA) and Alccofine are the eco-friendly materials that can be used in the production of concrete composites. Initially, concrete mixes of M30 grade with replacement of cement by 0%, 5%, 10%, 15%, 20% and 25% by weight of Fly ash were prepared. They were subjected to compression test so as to select the optimum replacement percentage of FA. Keeping this optimum percentage of FA as constant, additional replacement of cement with Alccofine was done varying its replacement in the range of 8%, 10%, 12% and 14%. The mechanical properties such as compressive, split tensile and flexural strengths of these mixes were computed for 7, 14 and 28 days. The results of Eco-Friendly Concrete (EFC) are compared with those of control concrete. It was observed that EFC mixes exhibited superior qualities like quick setting and enhanced workability, their mechanical properties were found to be higher than that of the conventional concrete. This goes to prove that the combination of FA and Alccofine together as replacement for cement would enhance the properties of EFC.

ECO-Report - The case for research: How it makes a difference to managers

Science.gov (United States)

Janie Canton-Thompson; Marcia Patton-Mallory; Sue Heald; Sharon Ritter; Robert D. Pfister; Dean E. Pearson; Yvette K. Ortega; Alan Watson; Elaine Kennedy Sutherland; Greg Jones

2003-01-01

ECO-Report is an annual Rocky Mountain Research Station (RMRS) publication which contains a set of articles showcasing the Bitterroot Ecosystem Management Research Project (BEMRP) research projects and activities. The articles are concise, user-friendly, and designed to inform a broad range of audiences interested in ecosystem management. Articles featured in...

Utilization of Geospatial Techniques for Extraction of Suitable River Islands for Construction of Eco-Friendly Tourism Places

Science.gov (United States)

Kuldeep, K.

2016-02-01

In India, most of the rivers form big size natural islands due to change in its course. However, identification of suitable river island for construction of Eco-friendly parks/tourist destination is a very challenging task since these are exposed to river flooding. River islands which are least vulnerable to the impact of severe flooding can be a suitable place for construction of tourism destination such as eco-friendly Parks, Hotels etc. The study involves a two step approach viz. automatic extraction of river islands and model development for flood inundation mapping for extraction of eco-friendly tourism destinations. In this study, automatic extraction of the river islands has been carried out using knowledge based classification approach. The satellite data acquired by the Indian Remote Sensing Satellites sensors such as LISS-III and Cartosat-1 DEM have been used for analyses. In the first step, satellite imagery has been broadly categorized into 5 landuse/cover classes viz. Water, Sand, Islands, Settlements and Cropland. Extraction of such islands which remain unaffected during severe flooding has been accomplished with the flood inundation mapping which has been carried out in HEC-GeoRas with in GIS environment. The model utilizes the primary 4 inputs viz. geometry of the river (DEM, slope), time series data of water surface elevation, landuse/cover, and location of rain gauge station for flood inundation mapping. This paper also investigates the applicability of the eco-island concept to include protection of wetland, management of land-resources, sustainable use of natural resources and construction of ecological park/hotels. The output of the study will be very useful for Government authorities in stabilizing economy, and enhancing the tourism infrastructure in a better way.

Printing of cotton with eco-friendly, red algal pigment from Gracilaria sp.

Science.gov (United States)

Moldovan, S.; Ferrandiz, M.; Franco, E.; Mira, E.; Capablanca, L.; Bonet, Mª

2017-10-01

Natural dyes represent an emerging trend in the textile industry and eco-fashion due to the increasing awareness of the sustainability concept, which must be applied to the surrounding environment. In the light of the stated problem, the search for alternative sources of dyes, revealed the new, eco-friendly, biodegradable, non-carcinogenic and sustainable colorant matter, the algal biomass. In the present work, the suitability and viability of printing cotton fabrics with pigments obtained from the red macroalgae Gracilaria sp., has been investigated. For this aim, phycoerythrin, the red pigment, was extracted from fresh algal biomass, and used in a laboratory pigment-printing process, employing a natural and synthetic printing paste, for process efficiency comparison. The color values and the rubbing and laundering fastness of the printed substrates were evaluated. Results show that a light pink color can be obtained when applying both tested printing processes, and in terms of color fastness, both printing pastes show good behavior. In conclusion, the algal pigments show a high printing capacity on cotton substrates, either when employing the synthetic conventional paste and; moreover, when applying the more sustainable and eco-friendly natural paste.

Taking a step towards greener future: A practical guideline for eco-friendly dentistry

Directory of Open Access Journals (Sweden)

Rupa K R

2015-03-01

Full Text Available Humans have had a tremendous impact on the ecology and of late have rapidly damaged its delicate balance. Dentists as protectors of oral health should not limit their responsibilities to patient treatment but also inculcate methods to protect the environment as well. Thus the concept of eco-friendly dentistry or green dentistry has been introduced. Eco-dentistry or "green dentistry" is a practice of dentistry using technologies and materials that promote and protect the planet. It is a thought process, an attitude, and a guide for making earth friendly choices in dental practice. This article intends to provide guidance to practitioners about the practical changes we can make in practice, so as to minimizing the release of potential pollutants and reduce the impact of dentistry on Earth.

Innovative eco-friendly bio- solvent for combating sea surface and sedimented oil pollution

Science.gov (United States)

Theodorou, Paraskevas

2017-04-01

The combating of oil spill at sea surface by chemical dispersants accelerates the evaporation and disperse the oil into the water column, where it is broken down by natural processes and/or is sedimented at the sea bottom, especially at near coastal shallow areas, ports and marinas. The usual methodology for cleaning the sedimented oil from the sea bottom is mainly carried out via excavation and dumping of the polluted sediment into deeper sea areas, where the contamination is transferred from one area to another. The eco-friendly bio-solvent MSL Aqua 250 is an innovative new solution based mainly on natural constituents. The action mechanism and the effectiveness of this eco-friendly solvent is based on the high surface tension process. Organic compounds, including hydrocarbons upon coming in contact with MSL Aqua 250 solvent generate a significant surface tension reaction, which is able to alter the organic compounds to liquid form and then to drastically evaporate it. The use of MSL Aqua 250 solvent, both at sea surface and at the bottom, has the following advantages compared to the dispersants: • Efficient solution without transferring the pollution from sea surface to the water column and to the bottom or disturbing the Aquatic Eco System. • Non-Toxic. • Environmentally friendly with a restoration of marine life in the Eco System. • Cost effective. The MSL Aqua 250 solvent has been tested in cooperation with the Cyprus Department of Fisheries and Marine Research and the Technological University of Cyprus and used during the years 2015 and 2016 in marinas and fishing shelters in Cyprus faced oil pollution, with high concentration in the sea water and at the sea bottom of chemical parameters (BOD5, COD, FOG, TKN, TP, TPH), with excellent results.

New insights into liquid chromatography for more eco-friendly analysis of pharmaceuticals.

Science.gov (United States)

Shaaban, Heba

2016-10-01

Greening the analytical methods used for analysis of pharmaceuticals has been receiving great interest aimed at eliminating or minimizing the amount of organic solvents consumed daily worldwide without loss in chromatographic performance. Traditional analytical LC techniques employed in pharmaceutical analysis consume tremendous amounts of hazardous solvents and consequently generate large amounts of waste. The monetary and ecological impact of using large amounts of solvents and waste disposal motivated the analytical community to search for alternatives to replace polluting analytical methodologies with clean ones. In this context, implementing the principles of green analytical chemistry (GAC) in analytical laboratories is highly desired. This review gives a comprehensive overview on different green LC pathways for implementing GAC principles in analytical laboratories and focuses on evaluating the greenness of LC analytical procedures. This review presents green LC approaches for eco-friendly analysis of pharmaceuticals in industrial, biological, and environmental matrices. Graphical Abstract Green pathways of liquid chromatography for more eco-friendly analysis of pharmaceuticals.

Eco-Friendly Magnetic Iron Oxide Pillared Montmorillonite for Advanced Catalytic Degradation of Dichlorophenol

Science.gov (United States)

Eco-friendly pillared montmorillonites, in which the pillars consist of iron oxide are expected to have interesting and unusual magnetic properties that are applicable for environmental decontamination. Completely “green” and effective composite was synthesized using mild reactio...

Development of eco-friendly polymeric materials by radiation

International Nuclear Information System (INIS)

Choi, Jae-hak; Shim, Kihyung; Kim, Jaeyoung

2012-12-01

In this project, the core technologies such as fabrication of eco-friendly and high-performance bioplastics, anionic exchange membranes for the energy generation, and anisotropic conductive films (ACF) for the electronic devices were developed by using an eco-friendly and low-energy consumption radiation. In the 1 st project group, the fabrication technologies of biodegradable polymer-based blends, biocompoistes, and foam were developed using a radiation crosslinking technology, and the possibility of their commercialization was evaluated through the fabrication of prototype products (fruits packaging material and adhesive) in the practical production lines. In the 2 nd project group, the fabrication technology of the anion exchange membranes for alkaline fuel cell were prepared by utilizing the inherent property of radiation such as high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, mechanical property, and chemical stability of the prepared membranes were measured. The results of the MEA performance test, the maximum power density of 115 mW and operation for 200 hours, indicates the possibility of the use of anion exchange membranes for alkaline fuel cell. In the 3rd project group, the electron beam-induced room temperature and fast curable epoxy was developed and the mechanism of electron beam-induced curing was investigated using various analytical methods. On the basis of the physical and electrical characterization, the prepared ACF exhibited lower resistance and higher tensile strength compared to that of the commercialized one

Development of eco-friendly polymeric materials by radiation

Energy Technology Data Exchange (ETDEWEB)

Choi, Jae-hak; Shim, Kihyung; Kim, Jaeyoung; and others

2012-12-15

In this project, the core technologies such as fabrication of eco-friendly and high-performance bioplastics, anionic exchange membranes for the energy generation, and anisotropic conductive films (ACF) for the electronic devices were developed by using an eco-friendly and low-energy consumption radiation. In the 1{sup st} project group, the fabrication technologies of biodegradable polymer-based blends, biocompoistes, and foam were developed using a radiation crosslinking technology, and the possibility of their commercialization was evaluated through the fabrication of prototype products (fruits packaging material and adhesive) in the practical production lines. In the 2{sup nd} project group, the fabrication technology of the anion exchange membranes for alkaline fuel cell were prepared by utilizing the inherent property of radiation such as high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, mechanical property, and chemical stability of the prepared membranes were measured. The results of the MEA performance test, the maximum power density of 115 mW and operation for 200 hours, indicates the possibility of the use of anion exchange membranes for alkaline fuel cell. In the 3rd project group, the electron beam-induced room temperature and fast curable epoxy was developed and the mechanism of electron beam-induced curing was investigated using various analytical methods. On the basis of the physical and electrical characterization, the prepared ACF exhibited lower resistance and higher tensile strength compared to that of the commercialized one.

Insect pests management of bt cotton through the manipulation of different eco-friendly techniques

International Nuclear Information System (INIS)

Ahmad, N.; Khan, M.H.; Tofique, M.

2011-01-01

This study was designed to manage insect pests of Bt cotton through the manipulation of different eco-friendly techniques. A perusal of data, based on the overall performance of different treatments reflected that lowest population of jassids (0.29) was observed in bio-control treated Bt cotton followed by bio-control treated conventional cotton (0.41). Mean per leaf population of thrips was found lowest in insecticide treated Bt cotton (0.97) which was statically at par with bi-control treated conventional cotton (0.95), biocontrol treated Bt cotton (1.09) and colour traps treated Bt cotton (1.50). In case of white flies, bio-control treated Bt cotton and bio-control treated conventional cotton again proved effective in maintaining the population at lower levels per leaf (0.33 and 0.35 respectively). No bollworms infestation was recorded in transgenic cotton whereas higher attack of the same was observed in the untreated conventional cotton block. The best results were achieved with the application of bio-control agents in combination with Bt cotton resulting in least infestation by insect pests and maximum seed yield of 3657 kg/ha. The population of Chrysoperla carnea was significantly higher in Bt and conventional cotton treated with bio-control agents as compared to the other treatments. The parasitism percentage of Trichogramma chilonis was observed significantly higher in bio-control treated conventional cotton. The studies manifested that combination of bio-control technology with Bt cotton effectively preserves the local beneficial insect fauna indicating its potential to be used as integrated management system against different insect pests of cotton. (author)

Research on the Eco-tourism and Environment-friendly Land Use Patterns in Shangri-La

OpenAIRE

Yan, Fei; Li, Wei; Liu, Yun

2014-01-01

Through the analysis of the geographical features of the Shangri-La, the eco-tourism and environment-friendly land use patterns were proposed. And the significances of the mode of economic development in Shangri-La were analyzed.

Nuclear power: an eco friendly energy source for sustainable development

International Nuclear Information System (INIS)

Obaidurrahman, K.; Singh, Om Pal

2009-01-01

When viewed from a large set of criteria such as abundance of energy resources, environmental impacts, low fuel inventory, quantum of waste generated and green house gas emissions, nuclear power can be considered as a large scale sustainable energy source. Among all energy sources, nuclear energy has perhaps the lowest impact on the environment, especially in relation to kilowatt-hr produced, because nuclear plants do not emit harmful gases and produce small quantity of waste. In other words, nuclear energy is the most environmental friendly electricity source. There are no significant adverse effects to water, land, habitat, species and air resources. The present paper discusses the sustainability and feasibility of nuclear power as an eco friendly energy source in the changing and challenging competitive power market. (author)

Can Social Comparison Feedback Affect Indicators of Eco-Friendly Travel Choices? Insights from Two Online Experiments

Directory of Open Access Journals (Sweden)

Rouven Doran

2017-01-01

Full Text Available Two online experiments explored the effects of social comparison feedback on indicators of eco-friendly travel choices. It was tested whether the chosen indicators are sensitive to the information conveyed, and if this varies as a function of in-group identification. Study 1 (N = 134 focused on unfavourable feedback (i.e., being told that one has a larger ecological footprint than the average member of a reference group. People who received unfavourable feedback reported stronger intentions to choose eco-friendly travel options than those who received nondiscrepant feedback, when in-group identification was high (not moderate or low. Perceived self- and collective efficacy were not associated with the feedback. Study 2 (N = 323 extended the focus on favourable feedback (i.e., being told that one has a smaller ecological footprint than the average member of a reference group. Neither unfavourable nor favourable feedback was associated with behavioural intentions, self- or collective efficacy. This means that Study 2 failed to replicate the finding of Study 1 that behavioural intentions were associated with unfavourable feedback, given that in-group identification is high. The findings are discussed in light of the existing literature. Suggestions are made for future studies investigating social comparison feedback as a means to motivate people to make eco-friendly travel choices.

The EcoCyc database: reflecting new knowledge about Escherichia coli K-12.

Science.gov (United States)

Keseler, Ingrid M; Mackie, Amanda; Santos-Zavaleta, Alberto; Billington, Richard; Bonavides-Martínez, César; Caspi, Ron; Fulcher, Carol; Gama-Castro, Socorro; Kothari, Anamika; Krummenacker, Markus; Latendresse, Mario; Muñiz-Rascado, Luis; Ong, Quang; Paley, Suzanne; Peralta-Gil, Martin; Subhraveti, Pallavi; Velázquez-Ramírez, David A; Weaver, Daniel; Collado-Vides, Julio; Paulsen, Ian; Karp, Peter D

2017-01-04

EcoCyc (EcoCyc.org) is a freely accessible, comprehensive database that collects and summarizes experimental data for Escherichia coli K-12, the best-studied bacterial model organism. New experimental discoveries about gene products, their function and regulation, new metabolic pathways, enzymes and cofactors are regularly added to EcoCyc. New SmartTable tools allow users to browse collections of related EcoCyc content. SmartTables can also serve as repositories for user- or curator-generated lists. EcoCyc now supports running and modifying E. coli metabolic models directly on the EcoCyc website. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

Primary Schools Eco-Friendly Education in the Frame of Education for Sustainable Development

Science.gov (United States)

Prabawani, Bulan; Hanika, Ita Musfirowati; Pradhanawati, Ari; Budiatmo, Agung

2017-01-01

A research on primary school education in the frame of education for sustainable development, as known as ESD, is important because the awareness of eco-friendly activities and environment empowerment cannot be developed in a short time. Meanwhile, human activities have caused significant environmental degradation. This is an exploratory study…

Fabricating eco-friendly nanocomposites of SiC with morphologically-different nano-carbonaceous phases 

DEFF Research Database (Denmark)

Candelario, Victor M.; Moreno, Rodrigo; Guiberteau, Fernando

2018-01-01

A route based on aqueous colloidal processing followed by liquid-phase assisted spark-plasma-sintering (SPS) is described for fabricating eco-friendly nanocomposites of SiC with nano-carbonaceous phases (nanotubes, nanoplatelets, or nanoparticles). To this end, the conditions optimizing the aqueo...

Eco-friendly synthesis of size-controllable amine-functionalized graphene quantum dots with antimycoplasma properties.

Science.gov (United States)

Jiang, Feng; Chen, Daiqin; Li, Ruimin; Wang, Yucheng; Zhang, Guoqiang; Li, Shumu; Zheng, Junpeng; Huang, Naiyan; Gu, Ying; Wang, Chunru; Shu, Chunying

2013-02-07

Size-controllable amine-functionalized graphene quantum dots (GQDs) are prepared by an eco-friendly method with graphene oxide sheets, ammonia and hydrogen peroxide as starting materials. Using a Sephadex G-25 gel column for fine separation, for the first time we obtain GQDs with either single or double layers. By atomic force microscopy characterization, we confirm that hydrogen peroxide and ammonia play a synergistic role on graphene oxide (GO), in which the former cuts the GO into small pieces and the latter passivates the active surface to give amine-modified GQDs. Due to the low cytotoxicity and excellent biocompatibility of the obtained amine-functionalized GQDs, besides the multiwavelength imaging properties of GQDs, for the first time we find that this kind of GQD exhibits good antimycoplasma properties. Given the superior antimycoplasma effect of the GQDs and their eco-friendly mass production with low cost, these new GQDs may offer opportunities for the development of new antimycoplasma agents, thus extending their widespread application in biomedicine.

Tailored sPP/Silica Nano composite for Eco friendly Insulation of Extruded HVDC Cable

International Nuclear Information System (INIS)

Dang, B.; He, J.; Hu, J.; Zhou, Y.

2015-01-01

Cross-linked polyethylene (XLPE) is a thermosetting material that cannot be recycled at the end of its lifetime. This study investigated the potential of syndiotactic polypropylene (sPP)/silica as an eco friendly extruded insulation system for HVDC cables. We investigated the morphology, Fourier transform infrared, and thermal, thermomechanical, and electrical behaviors of sPP modified with 0.5-3% nano silica. We found that the silica/sPP nano composite without cross-linking offered a suitable mechanical modulus at room temperature and sufficient intensity at high temperatures, and adding nano silica modified by a silane coupling agent to the sPP resulted in significant DC resistivity and space charge improvement. The optimal nano silica content in the sPP was determined by balancing the mechanical and thermomechanical characteristics and the DC resistivity. The sPP/silica nano composite reported here shows great potential as a candidate insulation material for future eco friendly extruded HVDC cables.

Environmental impact assessment and eco-friendly decision-making in civil structures.

Science.gov (United States)

Kim, Sang-Hyo; Choi, Moon-Seock; Mha, Ho-Seong; Joung, Jung-Yeun

2013-09-15

This study develops two useful procedures in performing an environmental-impact assessment. One is the advanced life-cycle assessment (LCA) method, which effectively tracks the flow of materials and considers the recycling and demolition of a civil structure. The other is an eco-friendly decision-making procedure, which may effectively apply when determining the prototype of a civil structure. The advanced LCA method differs from traditional LCA procedure, as it classifies the input material prior to the impact assessment. Classification work is performed to establish independent life-cycle stages for each material. The processes of recycling and demolition are appropriately added to the life-cycle stages. The impact assessment is performed separately for the materials, and results are aggregated at the end of the analysis. The eco-friendly decision-making procedure enables designers to choose an economical, and environmentally friendly, alternative during the planning phase of the construction project. This procedure rationally amalgamates economical value and environmental effects into a single indicator. The life cycle cost (LCC) of a structure can be analysed by using conventional LCC tools, whereas the environmental impact is estimated by LCA. The results from LCC and LCA are then integrated by using either a CO2 conversion method or an analytical hierarchy process (AHP). The CO2 conversion method presents the result as a monetary value, whereas the AHP presents the result as a non-dimensional value. A practical example using a steel box girder bridge and a pre-stressed concrete (PSC) box-girder bridge is also given in order to aid the understanding of the presented procedure. Copyright © 2013 Elsevier Ltd. All rights reserved.

Hydrocyanation of sulfonylimines using potassium hexacyanoferrate(II) as an eco-friendly cyanide source

International Nuclear Information System (INIS)

Li, Zheng; Li, Rongzhi; Zheng, Huanhuan; Wen, Fei; Li, Hongbo; Yin, Junjun; Yang, Jingya

2013-01-01

An efficient and eco-friendly method for hydrocyanation of sulfonylimines via one-pot two-step procedure using potassium hexacyanoferrate)II) as cyanide source, benzoyl chloride as a promoter, and potassium carbonate as a base is described. This protocol has the features of using nontoxic, nonvolatile and inexpensive cyanide source, high yield, and simple work-up procedure. (author)

Hydrocyanation of sulfonylimines using potassium hexacyanoferrate(II) as an eco-friendly cyanide source

Energy Technology Data Exchange (ETDEWEB)

Li, Zheng; Li, Rongzhi; Zheng, Huanhuan; Wen, Fei; Li, Hongbo; Yin, Junjun; Yang, Jingya, E-mail: lizheng@nwnu.edu.cn [Key Laboratory of Eco-Environment-Related Polymer Materials for Ministry of Education, College of Chemistry and Chemical Engineering, Northwest Normal University, Gansu (China)

2013-11-15

An efficient and eco-friendly method for hydrocyanation of sulfonylimines via one-pot two-step procedure using potassium hexacyanoferrate)II) as cyanide source, benzoyl chloride as a promoter, and potassium carbonate as a base is described. This protocol has the features of using nontoxic, nonvolatile and inexpensive cyanide source, high yield, and simple work-up procedure. (author)

Silica Sulfuric Acid: An Eco-Friendly and Reusable Catalyst for Synthesis of Benzimidazole Derivatives

Directory of Open Access Journals (Sweden)

Bahareh Sadeghi

2013-01-01

Full Text Available Silica sulfuric acid (SiO2-OSO3H as an eco-friendly, readily available, and reusable catalyst is applied to benzimidazole derivatives synthesis under reflux in ethanol. The procedure is very simple and the products are isolated with an easy workup in good-to-excellent yields.

Analyzing the impact on consumer satisfaction, behavior and at-titudes by using eco-friendly practices and products in Surfers Paradise/Gold Coast city hotels, Australia.

OpenAIRE

Chikita, Maria

2012-01-01

This study explores customer attitude towards environmentally friendly practices by hotels and the impact on customer satisfaction. The research investigates individual’s behavior, attitude, knowledge, satisfaction and willingness to support eco-friendly prac-tices. The hotel industry contributes to the global environmental challenges. Consumers are becoming more aware of the environmental impacts by the hotels and a new market segment of eco-friendly customers has developed. In addition ...

Eco-friendly design of scour protection: potential enhancement of ecological functioning in offshore wind farms

NARCIS (Netherlands)

Lengkeek, Wouter; Didderen, K.; Teunis, M.; Driessen, F.; Coolen, J.W.P.; Bos, O.G.; Vergouwen, S.A.; Raaijmakers, T.; Vries, de M.B.; Koningsveld, van M.

2017-01-01

The aim of this study is to explore the possibilities to implement ‘Building with North Sea Nature’ in offshore infrastructures in the North Sea by providing guidelines for the eco-friendly design of scour protection structures around monopiles in planned wind farms to enhance ecological

Eco-friendly Energy Storage System: Seawater and Ionic Liquid Electrolyte.

Science.gov (United States)

Kim, Jae-Kwang; Mueller, Franziska; Kim, Hyojin; Jeong, Sangsik; Park, Jeong-Sun; Passerini, Stefano; Kim, Youngsik

2016-01-08

As existing battery technologies struggle to meet the requirements for widespread use in the field of large-scale energy storage, novel concepts are urgently needed concerning batteries that have high energy densities, low costs, and high levels of safety. Here, a novel eco-friendly energy storage system (ESS) using seawater and an ionic liquid is proposed for the first time; this represents an intermediate system between a battery and a fuel cell, and is accordingly referred to as a hybrid rechargeable cell. Compared to conventional organic electrolytes, the ionic liquid electrolyte significantly enhances the cycle performance of the seawater hybrid rechargeable system, acting as a very stable interface layer between the Sn-C (Na storage) anode and the NASICON (Na3 Zr2 Si2 PO12) ceramic solid electrolyte, making this system extremely promising for cost-efficient and environmentally friendly large-scale energy storage. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Mechanical and thermal properties of eco-friendly poly(propylene carbonate)/cellulose acetate butyrate blends.

Science.gov (United States)

Xing, Chenyang; Wang, Hengti; Hu, Qiaoqiao; Xu, Fenfen; Cao, Xiaojun; You, Jichun; Li, Yongjin

2013-02-15

The eco-friendly poly(propylene carbonate) (PPC)/cellulose acetate butyrate (CAB) blends were prepared by melt-blending in a batch mixer for the first time. PPC and CAB were partially miscible because of the drastically shifted glass transition temperatures of both PPC and CAB, which originated from the specific interactions between carbonyl groups and hydroxyl groups. The incorporation of CAB into PPC matrix enhanced not only tensile strength and modulus of PPC dramatically, but also improved heat resistance and thermal stability of PPC significantly. The tensile strength and the modulus of PPC/CAB=50/50 blend are 27.7 MPa and 1.24 GPa, which are 21 times and 28 times higher than those of the unmodified PPC, respectively. Moreover, the elongation at break of PPC/CAB=50/50 blend is as high as 117%. In addition, the obtained blends exhibited good transparency, which is very important for the package materials. The results in this work pave new possibility for the massive application of eco-friendly polymer materials. Copyright © 2012 Elsevier Ltd. All rights reserved.

ECO-Report - Great issues, great diversions

Science.gov (United States)

Janie Canton-Thompson; Jim Saveland; Sharon Ritter; Yvette K Ortega; Dean F. Pearson; Mick Harrington; Elaine Kennedy Sutherland; Clint Cook; Greg Jones

2004-01-01

ECO-Report is an annual Rocky Mountain Research Station (RMRS) publication which contains a set of articles showcasing the Bitterroot Ecosystem Management Research Project (BEMRP) research projects and activities. The articles are concise, user-friendly, and designed to inform a broad range of audiences interested in ecosystem management. Articles featured in...

Highly efficient and eco-friendly gold-catalyzed synthesis of homoallylic ketones

KAUST Repository

Gó mez-Suá rez, Adriá n; Gasperini, Danila; Vummaleti, Sai V. C.; Poater, Albert; Cavallo, Luigi; Nolan, Steven P.

2014-01-01

We report a new catalytic protocol for the synthesis of γ,δ-unsaturated carbonyl units from simple starting materials, allylic alcohols and alkynes, via a hydroxalkoxylation/Claisen rearrangement sequence. This new process is more efficient (higher TON and TOF) and more eco-friendly (increased mass efficiency) than the previous state-of-the-art technique. In addition, this method tolerates both terminal and internal alkynes. Moreover, computational studies have been carried out in order to shed light on how the Claisen rearrangement is initiated. © 2014 American Chemical Society.

Highly efficient and eco-friendly gold-catalyzed synthesis of homoallylic ketones

KAUST Repository

Gómez-Suárez, Adrián

2014-08-01

We report a new catalytic protocol for the synthesis of γ,δ-unsaturated carbonyl units from simple starting materials, allylic alcohols and alkynes, via a hydroxalkoxylation/Claisen rearrangement sequence. This new process is more efficient (higher TON and TOF) and more eco-friendly (increased mass efficiency) than the previous state-of-the-art technique. In addition, this method tolerates both terminal and internal alkynes. Moreover, computational studies have been carried out in order to shed light on how the Claisen rearrangement is initiated. © 2014 American Chemical Society.

An R&D Management Framework for Eco-Technology

Directory of Open Access Journals (Sweden)

Kenji Sano

2011-08-01

Full Text Available Although research and development (R&D affects new value-added creation, including that related to environmental aspects, there is little literature dealing with the integration of R&D management and eco-value. Here, eco-value of technology is defined as the advantage of environmental competitiveness in the market. This paper proposes a framework of R&D management of eco-technology (RDMOET, consisting of: (1 future research for sustainability; (2 making an original eco-theme portfolio and roadmap; (3 gap analysis and implementation of new eco-themes; and (4 eco-value evaluation. (1 and (4 are new processes compared with conventional R&D management. Through practice at the Corporate R&D Center of Toshiba Corporation, the usefulness of the proposed framework is verified from the viewpoint of not only technological eco-innovation, but also that of organizational learning for environmental sustainability.

Green technology effect of injection pressure, timing and compression ratio in constant pressure heat addition cycle by an eco-friendly material.

Science.gov (United States)

Karthikayan, S; Sankaranarayanan, G; Karthikeyan, R

2015-11-01

Present energy strategies focus on environmental issues, especially environmental pollution prevention and control by eco-friendly green technologies. This includes, increase in the energy supplies, encouraging cleaner and more efficient energy management, addressing air pollution, greenhouse effect, global warming, and climate change. Biofuels provide the panorama of new fiscal opportunities for people in rural area for meeting their need and also the demand of the local market. Biofuels concern protection of the environment and job creation. Renewable energy sources are self-reliance resources, have the potential in energy management with less emissions of air pollutants. Biofuels are expected to reduce dependability on imported crude oil with connected economic susceptibility, reduce greenhouse gases, other pollutants and invigorate the economy by increasing demand and prices for agricultural products. The use of neat paradise tree oil and induction of eco-friendly material Hydrogen through inlet manifold in a constant pressure heat addition cycle engine (diesel engine) with optimized engine operating parameters such as injection timing, injection pressure and compression ratio. The results shows the heat utilization efficiency for neat vegetable oil is 29% and neat oil with 15% Hydrogen as 33%. The exhaust gas temperature (EGT) for 15% of H2 share as 450°C at full load and the heat release of 80J/deg. crank angle for 15% Hydrogen energy share. Copyright © 2015 Elsevier Inc. All rights reserved.

Properties of potential eco-friendly gas replacements for particle detectors in high-energy physics

Science.gov (United States)

Saviano, G.; Ferrini, M.; Benussi, L.; Bianco, S.; Piccolo, D.; Colafranceschi, S.; KjØlbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.; Grassini, S.; Parvis, M.

2018-03-01

Gas detectors for elementary particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This work studies properties of potential eco-friendly gas replacements by computing the physical and chemical parameters relevant for use as detector media, and suggests candidates to be considered for experimental investigation.

Environment Conscious Ceramics (Ecoceramics): An Eco-Friendly Route to Advanced Ceramic Materials

Science.gov (United States)

Singh, M.

2001-01-01

Environment conscious ceramics (Ecoceramics) are a new class of materials, which can be produced with renewable natural resources (wood) or wood wastes (wood sawdust). This technology provides an eco-friendly route to advanced ceramic materials. Ecoceramics have tailorable properties and behave like ceramic materials manufactured by conventional approaches. Silicon carbide-based ecoceramics have been fabricated by reactive infiltration of carbonaceous preforms by molten silicon or silicon-refractory metal alloys. The fabrication approach, microstructure, and mechanical properties of SiC-based ecoceramics are presented.

Curcuma longa extract – Haldi: A safe, eco-friendly natural cytoplasmic stain

OpenAIRE

Suryawanshi, Hema; Naik, Rupali; Kumar, Pramod; Gupta, Rolly

2017-01-01

Background: Eosin is most widely used synthetic dye belonging to the xanthene group. These dyes are efficient but are hazardous to human and animal health. With the increasing awareness of a green earth, it is advisable to use more of eco-friendly and biodegradable material which can be effectively achieved by the use of natural dyes obtained from plants and other natural sources. Turmeric, available as Curcuma longa (domestic), has long been in use in the subcontinent as a spice and flavorin...

Eco-friendly wood-based solid-state flexible supercapacitors from wood transverse section slice and reduced graphene oxide

Science.gov (United States)

Lv, Shaoyi; Fu, Feng; Wang, Siqun; Huang, Jingda; Hu, La

2015-07-01

An interesting wood-based all-solid-state supercapacitor is produced using reduced graphene oxide (RGO) coated on wood transverse section slice (WTSS) as electrode material by means of a low-cost, eco-friendly, and simple method for the first time. The RGO-coated WTSS electrode has a porous 3D honeycomb framework due to the hierarchical cellular structure of the WTSS substrate and can function as an electrolyte reservoir. This special construction endows this novel electrode with good areal capacitance (102 mF cm-2) and excellent cyclic stability (capacitance retention of 98.9% after 5000 cycles). In addition, the supercapacitors exhibit good mechanical flexibility and preserve almost constant capacitive behavior under different bending conditions. Our study introduces a new and eco-friendly material design for electrodes in future flexible energy storage devices that closely resemble natural materials. [Figure not available: see fulltext.

Practical, economical, and eco-friendly starch-supported palladium catalyst for Suzuki coupling reactions.

Science.gov (United States)

Baran, Talat

2017-06-15

In catalytic systems, the support materials need to be both eco friendly and low cost as well as having high thermal and chemical stability. In this paper, a novel starch supported palladium catalyst, which had these outstanding properties, was designed and its catalytic activity was evaluated in a Suzuki coupling reaction under microwave heating with solvent-free and mild reaction conditions. The starch supported catalyst gave remarkable reaction yields after only 5min as a result of the coupling reaction of the phenyl boronic acid with 23 different substrates, which are bearing aril bromide, iodide, and chloride. The longevity of the catalyst was also investigated, and the catalyst could be reused for 10 runs. The starch supported Pd(II) catalyst yielded remarkable TON (up to 25,000) and TOF (up to 312,500) values by using a simple, fast and eco-friendly method. In addition, the catalytic performance of the catalyst was tested against different commercial palladium catalysts, and the green starch supported catalyst had excellent selectivity. The catalytic tests showed that the novel starch based palladium catalyst proved to be an economical and practical catalyst for the synthesis of biaryl compounds. Copyright © 2017 Elsevier Inc. All rights reserved.

An R&D Management Framework for Eco-Technology

OpenAIRE

Hideki Kobayashi; Masahiro Kato; Yukishige Maezawa; Kenji Sano

2011-01-01

Although research and development (R&D) affects new value-added creation, including that related to environmental aspects, there is little literature dealing with the integration of R&D management and eco-value. Here, eco-value of technology is defined as the advantage of environmental competitiveness in the market. This paper proposes a framework of R&D management of eco-technology (RDMOET), consisting of: (1) future research for sustainability; (2) making an original eco-theme p...

An eco-friendly approach for heavy metal adsorbent regeneration using CO2-responsive molecular octopus.

Science.gov (United States)

Bai, Yu; Liang, Yen Nan; Hu, Xiao

2017-10-01

Perennial problems of adsorption in wastewater treatment include adsorbent recycling, generation of waste sludge and secondary pollution because harmful concentrated acids, bases or strong chelators are often used for adsorbent regeneration and adsorbate recovery. We report, for the first time, an eco-friendly regeneration concept demonstrated with a CO 2 -responsive octopus-like polymeric adsorbent. Various heavy metals can be scavenged at very high Q e by such adsorbent through coordination. Most importantly, the rapid and complete regeneration of the adsorbent and recovery of the heavy metal ions can be readily achieved by CO 2 bubbling within a few minutes under mild conditions, i.e., room temperature and atmospheric pressure. The adsorbent can then be restored to its adsorptive state and reused upon removal of CO 2 by simply bubbling another gas. This eco-friendly, effective, ultra-fast and repeatable CO 2 -triggered regeneration process using CO 2 -responsive adsorbent with versatile structure, morphology or form can be incorporated into a sustainable closed-loop wastewater treatment process to solve the perennial problems. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses

NARCIS (Netherlands)

Yu, R.; Spiesz, P.R.; Brouwers, H.J.H.

2015-01-01

This paper addresses the development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses are investigated. The modified Andreasen & Andersen particle packing model is utilized to achieve a densely compacted cementitious matrix. Fly ash (FA),

EcoGene 3.0.

Science.gov (United States)

Zhou, Jindan; Rudd, Kenneth E

2013-01-01

EcoGene (http://ecogene.org) is a database and website devoted to continuously improving the structural and functional annotation of Escherichia coli K-12, one of the most well understood model organisms, represented by the MG1655(Seq) genome sequence and annotations. Major improvements to EcoGene in the past decade include (i) graphic presentations of genome map features; (ii) ability to design Boolean queries and Venn diagrams from EcoArray, EcoTopics or user-provided GeneSets; (iii) the genome-wide clone and deletion primer design tool, PrimerPairs; (iv) sequence searches using a customized EcoBLAST; (v) a Cross Reference table of synonymous gene and protein identifiers; (vi) proteome-wide indexing with GO terms; (vii) EcoTools access to >2000 complete bacterial genomes in EcoGene-RefSeq; (viii) establishment of a MySql relational database; and (ix) use of web content management systems. The biomedical literature is surveyed daily to provide citation and gene function updates. As of September 2012, the review of 37 397 abstracts and articles led to creation of 98 425 PubMed-Gene links and 5415 PubMed-Topic links. Annotation updates to Genbank U00096 are transmitted from EcoGene to NCBI. Experimental verifications include confirmation of a CTG start codon, pseudogene restoration and quality assurance of the Keio strain collection.

EcoGene 3.0

Science.gov (United States)

Zhou, Jindan; Rudd, Kenneth E.

2013-01-01

EcoGene (http://ecogene.org) is a database and website devoted to continuously improving the structural and functional annotation of Escherichia coli K-12, one of the most well understood model organisms, represented by the MG1655(Seq) genome sequence and annotations. Major improvements to EcoGene in the past decade include (i) graphic presentations of genome map features; (ii) ability to design Boolean queries and Venn diagrams from EcoArray, EcoTopics or user-provided GeneSets; (iii) the genome-wide clone and deletion primer design tool, PrimerPairs; (iv) sequence searches using a customized EcoBLAST; (v) a Cross Reference table of synonymous gene and protein identifiers; (vi) proteome-wide indexing with GO terms; (vii) EcoTools access to >2000 complete bacterial genomes in EcoGene-RefSeq; (viii) establishment of a MySql relational database; and (ix) use of web content management systems. The biomedical literature is surveyed daily to provide citation and gene function updates. As of September 2012, the review of 37 397 abstracts and articles led to creation of 98 425 PubMed-Gene links and 5415 PubMed-Topic links. Annotation updates to Genbank U00096 are transmitted from EcoGene to NCBI. Experimental verifications include confirmation of a CTG start codon, pseudogene restoration and quality assurance of the Keio strain collection. PMID:23197660

An eco-friendly in situ activatable antibiotic via cucurbit[8]uril-mediated supramolecular crosslinking of branched polyethylenimine.

Science.gov (United States)

Li, Shengke; Jiang, Nan; Zhao, Wenxuan; Ding, Yuan-Fu; Zheng, Ying; Wang, Lian-Hui; Zheng, Jun; Wang, Ruibing

2017-05-30

We report an unprecedented, eco-friendly, in situ activatable model antibiotic, phenylalanyl-polyethylenimine (PhePEI), to potentially diminish antibiotic pollution of the environment and associated antibiotic resistance. The inactive PhePEI can be reversibly activated upon supramolecular crosslinking by cucurbit[8]uril, conferring potent antibacterial activity.

Anticancer activity of eco-friendly gold nanoparticles against lung and liver cancer cells

OpenAIRE

S. Rajeshkumar

2016-01-01

Gold nanoparticles have many applications in biomedical field. Improving delivery of anticancer agents to tumors using nanoparticles is one of the most promising research arenas in the field of nanotechnology. Eco-friendly gold nanoparticles synthesis was studied using marine bacteria Enterococcus sp. The nanoparticle synthesis started at 2 h of incubation time was identified by the formation of ruby red in the reaction mixture and SPR band centered at 545 nm. XRD shows that the strong four i...

Preparation of Eco-Friendly Leather by Process Modifications to Make Pollution Free Tanneries

OpenAIRE

Mekonnen, Derese; Habtamu, Shewarega; Sathiyamoorthy, M; Selvi, V

2013-01-01

The term eco friendly leather meant the chrome free leather. Around 80% of leather is tanned using chromium. The chromium used in the tannery may be in the form of chromium III, IV and chromium VI compounds. The chromium tanned leathers use chromium III salts (Trivalent chromium) in the form of chromium sulfate. This form of chromium is found naturally in the environment and is necessary nutrient for the human body. However the chromium III oxidizes to chromium VI (Hexavalent chromium) in the...

Eco-friendly Crosslinking Agent for Acid Functional Acrylic Resin

Directory of Open Access Journals (Sweden)

Archana Shah

2009-01-01

Full Text Available Oil from J. multifida was extracted and it was first converted into N,N-bis(2-hydroxyethyl Jatropha fatty amide (HEJFA. HEJFA has been synthesized by reaction between Jatropha oil and diethanol amine in presence of zinc oxide as a catalyst. The reaction is relatively rapid and proceeded to high yield at 200±5 OC. The resulting HEJFA was used to formulate thermosetting coating compositions. Films were cured at ambient (air drying and elevated (stove drying temperatures using N, N-bis(2-hydroxyethyl Jatropha fatty amide (HEJFA as eco-friendly crosslinking agent for acrylic resin. The coating performance of the various compositions was tested by measurement of scratch hardness, impact strength and chemical resistance. The results show better performance of the HEJFA based compositions compared to butylated melamine formaldehyde (MF based compositions.

Fast and eco-friendly fabrication of uniform Ag substrates for highly sensitive surface-enhanced Raman scattering

Science.gov (United States)

Xu, Yongda; Li, Xin; Jiang, Lan; Meng, Ge; Ran, Peng; Lu, Yongfeng

2017-05-01

This study proposed a fast, simple, eco-friendly method for obtaining highly sensitive and uniform surface-enhanced Raman scattering (SERS) of silver (Ag) nanotextured substrates decorated with silver nanoparticles in open air. By splitting conventional femtosecond pulses (subpulse delay Δt = 0 ps) into pulse trains (subpulse delay Δt = 3 ps), the mean diameter of Ag nanoparticles was reduced by almost half and the amount of Ag nanoparticles with a diameter ranging from 20 to 60 nm was increased by more than 11 times. The substrate fabricated by femtosecond pulse trains has four main merits as follows: (1) High sensitivity: the maximum SERS enhancement factor is 1.26 × 109; (2) High efficiency: the fabrication rate can be up to 1600 μm2/s, which is 20-40 times faster than femtosecond photochemical reduction; (3) Good reproducibility: the relative standard deviation of the Raman signal intensity is 10.7%, which is one-third of that for conventional femtosecond laser; (4) Eco-friendly fabrication: neither chemical reagents nor vacuum conditions are needed during the fabrication process.

Eco-friendly synthesis for MCM-41 nanoporous materials using the non-reacted reagents in mother liquor.

Science.gov (United States)

Ng, Eng-Poh; Goh, Jia-Yi; Ling, Tau Chuan; Mukti, Rino R

2013-03-04

Nanoporous materials such as Mobil composite material number 41 (MCM-41) are attractive for applications such as catalysis, adsorption, supports, and carriers. Green synthesis of MCM-41 is particularly appealing because the chemical reagents are useful and valuable. We report on the eco-friendly synthesis of MCM-41 nanoporous materials via multi-cycle approach by re-using the non-reacted reagents in supernatant as mother liquor after separating the solid product. This approach was achieved via minimal requirement of chemical compensation where additional fresh reactants were added into the mother liquor followed by pH adjustment after each cycle of synthesis. The solid product of each successive batch was collected and characterized while the non-reacted reagents in supernatant can be recovered and re-used to produce subsequent cycle of MCM-41. The multi-cycle synthesis is demonstrated up to three times in this research. This approach suggests a low cost and eco-friendly synthesis of nanoporous material since less waste is discarded after the product has been collected, and in addition, product yield can be maintained at the high level.

Is urbanization eco-friendly? An energy and land use cross-country analysis

International Nuclear Information System (INIS)

Long, X.; Ji, Xi; Ulgiati, S.

2017-01-01

Urbanization imposes complicated and heterogeneous impacts on ecosystems. With the purpose of reflecting the comprehensive influence of urbanization on the ecosystem, we choose the ecological footprint to represent the ecosystem's integrated change and distinguish low-income, middle-income and high-income countries to reflect the nonlinear impact. This paper uses both static and dynamic STIRPAT (Stochastic Impacts by Regression on Population, Affluence and Technology) models to analyze 72 countries at different income levels during the 1980–2008 period. The results show that the overall ecological elasticity of urbanization at the global level is negative. Specifically, results suggest urbanization, associated to increased income, to have eco-friendly potential in terms of decreased ecological footprint. To explain such results, this paper answers two questions: Why does urbanization show ecological protection effects? Why does a more pronounced protection effect seem associated to increased income levels? Improved market mechanism, increased resource use efficiency as well as increased environmental awareness in urban areas associated to increased income levels are likely to support an eco-friendly urbanization process. Burden-shift to low-income countries also needs to be taken into account, in order to avoid policies that increase wellbeing locally at the expenses of far-away areas. - Highlights: • Ecological effects of urbanization are estimated. • Ecological footprint is used to represent the integrated change related to energy and land use. • Static and dynamic STIRPAT models are employed for regression. • The reasons for the ecological protection effect of urbanization are analyzed. • The heterogeneity of urban structure and function across income levels is discussed.

Implementing eco friendly highly reliable upload feature using multi 3G service

Science.gov (United States)

Tanutama, Lukas; Wijaya, Rico

2017-12-01

The current trend of eco friendly Internet access is preferred. In this research the understanding of eco friendly is minimum power consumption. The devices that are selected have operationally low power consumption and normally have no power consumption as they are hibernating during idle state. To have the reliability a router of a router that has internal load balancing feature will provide the improvement of previous research on multi 3G services for broadband lines. Previous studies emphasized on accessing and downloading information files from Public Cloud residing Web Servers. The demand is not only for speed but high reliability of access as well. High reliability will mean mitigating both direct and indirect high cost due to repeated attempts of uploading and downloading the large files. Nomadic and mobile computer users need viable solution. Following solution for downloading information has been proposed and tested. The solution is promising. The result is now extended to providing reliable access line by means of redundancy and automatic reconfiguration for uploading and downloading large information files to a Web Server in the Cloud. The technique is taking advantage of internal load balancing feature to provision a redundant line acting as a backup line. A router that has the ability to provide load balancing to several WAN lines is chosen. The WAN lines are constructed using multiple 3G lines. The router supports the accessing Internet with more than one 3G access line which increases the reliability and availability of the Internet access as the second line immediately takes over if the first line is disturbed.

Eco-friendly synthesis of Graphene using the aqueous extract of Amaranthus dubius

Directory of Open Access Journals (Sweden)

M. Jannathul Firdhouse

2013-06-01

Full Text Available An eco-friendly process of reduction of graphene oxide using aqueous extract of Amaranthus dubius under refluxing method is herein reported. The colour change of the graphene oxide (GO solution from brown to black was noted during the reduction of graphene oxide. UV-Visible spectrophotometer was used to monitor the formation of reduced graphene oxide (AKRGO. The crystallite size of nanographene was confirmed by XRD analysis and Scherrer’s formula. FTIR spectral analysis revealed the reduction of graphene oxide using aqueous extract of Amaranthus dubius. The morphology of the synthesized graphene was examined by SEM analysis.

The relationship of eco-friendly attitudes with walking and biking to work.

Science.gov (United States)

Bopp, Melissa; Kaczynski, Andrew T; Wittman, Pamela

2011-01-01

Active commuting (AC) to work is an effective strategy for integrating regular physical activity (PA) into daily life routines, but limited research exists on influences of AC among adults. Current trends and interests toward environmental consciousness and sustainable forms of travel could impact transportation-related PA. The purpose of this study was to examine the association between eco-friendly attitudes (EFA) and several variables related to AC. A cross-sectional study of respondents to an online survey. Employed adults, physically able to walk or bicycle. The survey included questions about EFA, AC patterns, motivators and barriers for AC, and demographics. Eco-friendly attitudes were measured using a 9-item scale (eg, "I subscribe to ecological publications"). Participants were divided into quartiles on the basis of their EFA summary score (higher score = more ecologically friendly), and t tests and analyses of variance were used to make comparisons across groups on several variables related to AC. The sample (n = 375) was primarily young to middle-aged adults (mean age 39.4 ± 12.9 years), female (60.7%), and Caucasian (90.3%), with at least a high school education (94.6% with high school diploma or greater). Participants reported actively commuting an average of 2.4 ± 4.5 times per week and driving on average 8.4 ± 3.8 times per week. The mean EFA score was 33.4 ± 12.1 out of 63. Age was negatively related and education was positively related to EFA. Compared with those in the lower 3 quartiles, individuals in the top quartile of EFA scores were more likely to actively commute and less likely to drive and reported more self-efficacy, fewer barriers, and more motivators for AC. This study provides insight into potential influences on AC and possible strategies for intervention. Future studies should continue to investigate ecological attitudes as a possible moderator of AC behavior. Public health-based interventions to promote AC may use ecology

MICP and Advances towards Eco-Friendly and Economical Applications

Science.gov (United States)

Rajasekar, Adharsh; Moy, Charles K. S.; Wilkinson, Stephen

2017-07-01

Biomineralization is a natural process aided by living organisms. Due to its applicability in ground improvement and bioremediation, Microbially Induced Calcite Precipitation (MICP) is an interdisciplinary field of study combining engineering, chemistry and microbiology. Bioremediation has been applied widely for contamination containment or removal, in this case it will be containment. MICP can also be applied to improve the efficiency of insitu bioremediation. Urease is an enzyme which can facilitate increased calcite precipitation. However the production of urease by bacteria and thus the resulting carbonate precipitation are inhibited by environmental factors including calcium concentration, bacterial concentration, pH and temperature. Under good conditions MICP can be used for heavy metal and radionuclide immobilization. However technologies such as bioconsolidation and biocementation require improvement such as time and cost. This paper highlights the application of MICP in addition to suggested improvements to make it more eco-friendly and sustainable.

Eco-friendly Oxidative Iodination of Various Arenes with Sodium Percarbonate as the Oxidantâ€

Directory of Open Access Journals (Sweden)

Lech Skulski

2005-10-01

Full Text Available Six easy laboratory procedures are presented for the oxidative iodination ofvarious aromatics, mostly arenes, with either molecular iodine or potassium iodide (usedas the sources of iodinating species, I or I3 , in the presence of sodium percarbonate(SPC, a stable, cheap, easy to handle, and eco-friendly commercial oxidant.

ECO-Report - Scale matters - some thoughts on landscape sustainability

Science.gov (United States)

Sharon Ritter; Janie Canton-Thompson; Greg Jones; Ward McCaughey; Dave Calkin; Mick Harrington; Peter Kolb; LaWen Hollingsworth; Joe Jensen; Katie Knotek; Brooke Thompson

2005-01-01

ECO-Report is an annual Rocky Mountain Research Station (RMRS) publication which contains a set of articles showcasing the Bitterroot Ecosystem Management Research Project (BEMRP) research projects and activities. The articles are concise, user-friendly, and designed to inform a broad range of audiences interested in ecosystem management. Articles featured in...

Waste glass as eco-friendly replacement material in construction products

Science.gov (United States)

Sharma, Gayatri; Sharma, Anu

2018-05-01

Atpresent time the biggest issue is increasing urban population, industrialization and development all over the world. The quantity of the raw materials of construction products like cement, concrete etc is gradually depleting. This is important because if we don't find the alternative material to accomplish need of this industry, with every year it will put pressure on natural resources which are limited in quantity. This major issue can be solved by partial replacing with waste glass of different construction products. This paper gives an overview of the current growth and recycling situation of waste glass and point out the direction for the proper use of waste glass as replacement of construction material. These will not only help in the reuse of waste glass but also create eco-friendly environment.

Eco-Friendly Superwetting Material for Highly Effective Separations of Oil/Water Mixtures and Oil-in-Water Emulsions.

Science.gov (United States)

Wang, Chih-Feng; Yang, Sheng-Yi; Kuo, Shiao-Wei

2017-02-20

Because the treatment of oily wastewater, generated from many industrial processes, has become an increasing environmental concern, the search continues for simple, inexpensive, eco-friendly, and readily scalable processes for fabricating novel materials capable of effective oil/water separation. In this study we prepared an eco-friendly superhydrophilic and underwater superoleophobic polyvinylpyrrolidone (PVP)-modified cotton that mediated extremely efficient separations of mixtures of oil/water and oil/corrosive solutions. This PVP-modified cotton exhibited excellent antifouling properties and could be used to separate oil/water mixtures continuously for up to 20 h. Moreover, the compressed PVP-modified cotton could separate both surfactant-free and -stabilized oil-in-water emulsions with fluxes of up to 23,500 L m -2 h -1 bar -1 -a level one to two orders of magnitude higher than that possible when using traditional ultrafiltration membranes having similar rejection properties. The high performance of our PVP-modified cotton and its green, low-energy, cost-effective preparation suggest its great potential for practical applications.

Polyacrylamide grafted cellulose as an eco-friendly flocculant: Key factors optimization of flocculation to surfactant effluent.

Science.gov (United States)

Zhu, Hangcheng; Zhang, Yong; Yang, Xiaogang; Shao, Lan; Zhang, Xiumei; Yao, Juming

2016-01-01

The discharge of effluents from surfactant manufacturers is giving rise to increasingly serious environmental problems. In order to develop the eco-friendly flocculation materials to achieve effective removal of pollutants from the surfactant effluents, the bamboo pulp cellulose from Phyllostachys heterocycla is employed as the skeleton material to synthesize an eco-friendly bamboo pulp cellulose-g-polyacrylamide (BPC-g-PAM) for flocculation. The BPC-g-PAM is used with the metal ions as the coagulant to treat the effluent from a surfactant manufacturer. The response surface methodology coupled with Box-behnken design is employed to optimize the key factors of coagulation-flocculation. The results show that the combination of Fe(3+) with BPC-g-PAM achieves the best coagulation-flocculation performance like, the fast treatment time, minimum coagulant and BPC-g-PAM dosages compared with the other two combinations of Al(3+) with BPC-g-PAM and Ca(2+) with BPC-g-PAM. Therefore, the combination of Fe(3+) with BPC-g-PAM is expected to promote its application for the pollution control in the surfactant manufacturers. Copyright © 2015 Elsevier Ltd. All rights reserved.

Eco-friendly aqueous core surface-modified nanocapsules.

Science.gov (United States)

Carbone, C; Musumeci, T; Lauro, M R; Puglisi, G

2015-01-01

In this work, positively charged nanocapsules have been developed for potential ocular delivery exploiting the deposition of PLA onto the droplet surface of a W/O nanoemulsion prepared by the reversed procedure of the PIT method. PLA in combination with different amounts of various oils and surfactants have been studied in order to select the best formulation for polymeric nanocapsule preparation. The traditional visual observation together with the Turbiscan(®) technology were exploited in order to identify the best combination of polymer/oil for nanocapsule preparation. Two different primary surfactants (Span(®) 60 and Span(®) 80) have been tested to select their influence on the field of existence of the nanoemulsion by the construction of the pseudoternary phase diagrams. Cationic hybrid NC have been prepared by the addition of a coating layer of DDAB. The physico-chemical and morphological properties of all the prepared nanocapsules have been evaluated and compared by PCS, DSC and AFM. Therefore, positively charged nanocapsules can be easily prepared by a simple eco-friendly technique that exploits biocompatible materials avoiding a large input of mechanical energy as a potential ocular delivery systems for hydrophilic compounds or gene materials. Copyright © 2014 Elsevier B.V. All rights reserved.

Communicating Eco-Friendly Benefits: Why Accidental Improvements May Be Better Received by Consumers

Directory of Open Access Journals (Sweden)

Newman George E.

2016-05-01

Full Text Available Doing good does not necessarily imply doing well for a company. Ironically, in the case of green products it can even be quite the contrary. Deliberately enhancing a product with environmental benefits to make it more appealing may actually lead to a decrease in consumer interest because consumers suspect that quality was reduced on other dimensions. Even explicitly stating that the company cares about both the environment and quality is not sufficient to overcome consumers’ skepticism, according to our experiments. Fortunately, there are ways to communicate environmental improvements successfully. Companies improving a basic product feature like making something more eco-friendly should either position the improvement as unintended or emphasize that the primary goal is improving the quality of the product. Focusing on eco-conscious market segments also helps to avoid harm and might even be beneficial. Improvements on dimensions that are not inherent to a product’s composition, like fair trade or other social benefits, turned out to be less critical in the experiments.

Green Consumerism : an Eco-Friendly Behaviour Form Through The Green Product Consumption and Green Marketing

OpenAIRE

Handayani, Wiwik

2017-01-01

This research is referred to analyse the influence of consumer attitude of green product towards purchase intention. The consumer attitude of green product is a psychological tendencies that is expressed by evaluating a certain entity with some advantage or disadvantage considerations. The problem of this research is the low of cunsumer awareness to consume green product, because the lack to comprehend the importance of green product usage for health and eco-friendly. The purpose of this rese...

Waste minimization through process optimization/integration and resource management at eco-friendly Heavy Water Plants

International Nuclear Information System (INIS)

Nageshri, Jagdish; Gupta, S.K.

2004-01-01

Heavy Water Board has celebrated 2003 as Environmental Conservation Year captivating a range of enviro-friendly measures. This article attempts to give a brief overview of the outcome of systems and adapted procedures for waste minimization through process integration and resource management at Heavy Water Plants

Highly efficient and regioselective acylation of pharmacologically interesting cordycepin catalyzed by lipase in the eco-friendly solvent 2-methyltetrahydrofuran.

Science.gov (United States)

Chen, Zhi-Gang; Zhang, Dan-Ni; Cao, Lin; Han, Yong-Bin

2013-04-01

A total of nine lipases and three proteases were tested for enzymatic regioselective acylation(s) of cordycepin with vinyl acetate in organic media. The highest conversion with better initial reaction rate was achieved with immobilized Candida antarctica lipase B (Novozym 435). An eco-friendly solvent 2-methyltetrahydrofuran (MeTHF) was thought to be the most suitable reaction medium. Novozym 435 was found to be a useful biocatalyst for the 25-g scale syntheses of cordycepin acetate (96.2% isolated yield), and the biocatalyst displayed excellent regioselectivity and high operational stability during the transformation. The 5'-substituted cordycepin derivative was the sole detectable product from each acylation reaction. Novozym 435 could be recycled for the synthesis of cordycepin derivative on a 25-g scale and 63% of its original activity was maintained after being reused for 7 batches. MeTHF could be considered as an eco-friendly solvent for the large scale use in biotransformation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Bio-inspired color sketch for eco-friendly printing

Science.gov (United States)

Safonov, Ilia V.; Tolstaya, Ekaterina V.; Rychagov, Michael N.; Lee, Hokeun; Kim, Sang Ho; Choi, Donchul

2012-01-01

Saving of toner/ink consumption is an important task in modern printing devices. It has a positive ecological and social impact. We propose technique for converting print-job pictures to a recognizable and pleasant color sketches. Drawing a "pencil sketch" from a photo relates to a special area in image processing and computer graphics - non-photorealistic rendering. We describe a new approach for automatic sketch generation which allows to create well-recognizable sketches and to preserve partly colors of the initial picture. Our sketches contain significantly less color dots then initial images and this helps to save toner/ink. Our bio-inspired approach is based on sophisticated edge detection technique for a mask creation and multiplication of source image with increased contrast by this mask. To construct the mask we use DoG edge detection, which is a result of blending of initial image with its blurred copy through the alpha-channel, which is created from Saliency Map according to Pre-attentive Human Vision model. Measurement of percentage of saved toner and user study proves effectiveness of proposed technique for toner saving in eco-friendly printing mode.

Sacrificial amphiphiles: Eco-friendly chemical herders as oil spill mitigation chemicals.

Science.gov (United States)

Gupta, Deeksha; Sarker, Bivas; Thadikaran, Keith; John, Vijay; Maldarelli, Charles; John, George

2015-06-01

Crude oil spills are a major threat to marine biota and the environment. When light crude oil spills on water, it forms a thin layer that is difficult to clean by any methods of oil spill response. Under these circumstances, a special type of amphiphile termed as "chemical herder" is sprayed onto the water surrounding the spilled oil. The amphiphile forms a monomolecular layer on the water surface, reducing the air-sea surface tension and causing the oil slick to retract into a thick mass that can be burnt in situ. The current best-known chemical herders are chemically stable and nonbiodegradable, and hence remain in the marine ecosystem for years. We architect an eco-friendly, sacrificial, and effective green herder derived from the plant-based small-molecule phytol, which is abundant in the marine environment, as an alternative to the current chemical herders. Phytol consists of a regularly branched chain of isoprene units that form the hydrophobe of the amphiphile; the chain is esterified to cationic groups to form the polar group. The ester linkage is proximal to an allyl bond in phytol, which facilitates the hydrolysis of the amphiphile after adsorption to the sea surface into the phytol hydrophobic tail, which along with the unhydrolyzed herder, remains on the surface to maintain herding action, and the cationic group, which dissolves into the water column. Eventual degradation of the phytol tail and dilution of the cation make these sacrificial amphiphiles eco-friendly. The herding behavior of phytol-based amphiphiles is evaluated as a function of time, temperature, and water salinity to examine their versatility under different conditions, ranging from ice-cold water to hot water. The green chemical herder retracted oil slicks by up to ~500, 700, and 2500% at 5°, 20°, and 35°C, respectively, during the first 10 min of the experiment, which is on a par with the current best chemical herders in practice.

Egg extract of apple snail for eco-friendly synthesis of silver nanoparticles and their antibacterial activity.

Science.gov (United States)

Janthima, Ratima; Khamhaengpol, Arunrat; Siri, Sineenat

2018-03-01

Green synthesis of silver nanoparticles (AgNPs) provides the alternative method with cost effectiveness and the eco-friendly process by using natural biomolecules as reducing and stabilizing agents. Alternative to the most studies of plant extracts, this work demonstrated a use of egg extract of apple snail (Pomacea canaliculata) for an eco-friendly production of AgNPs. The extract contained at least six proteins with the molecular weight in a range of 24-65 kDa that exhibited the reducing activity. The dispersive AgNPs were produced in the reaction containing only the extract and silver nitrate, as determined by the characteristic surface plasmon resonance peak of silver at 412 nm. The synthesized AgNPs were spherical with the average diameter of 9.0 ± 5.9 nm. The X-ray diffraction pattern and selected area electron diffraction (SAED) analyses confirmed the face-cubic centre (fcc) unit cell structure of AgNPs. The synthesized AgNPs exhibited the antibacterial activity against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. Results of this work clearly showed the potential use of the egg extract of apple snail for a green synthesis of small size AgNPs exhibiting the antibacterial activity.

Eco-friendly synthesis of Solanum trilobatum extract-capped silver nanoparticles is compatible with good antimicrobial activities

Science.gov (United States)

Ramanathan, Santheraleka; Gopinath, Subash C. B.; Anbu, Periasamy; Lakshmipriya, Thangavel; Kasim, Farizul Hafiz; Lee, Choul-Gyun

2018-05-01

This study focused on the evaluation of antimicrobial activity of silver nanoparticles (AgNPs) after their green synthesis by means of a Solanum trilobatum bark extract. The obtained product with an intense surface plasmon resonance band at ∼442 nm with UV-visible spectroscopic analysis indicated the formation of AgNPs. The morphology of AgNPs was observed under transmission electron microscopy and field emission scanning electron microscopy, displayed that the eco-friendly synthesized AgNPs have a spherical shape with an average size of ∼25 nm in diameter. X-ray powder diffraction and selected area electron diffraction analyses confirmed that the AgNPs are crystalline in nature. Fourier transform infrared spectroscopy indicated that the AgNPs capped with active ingredients of the bark extract. X-ray photoelectron spectroscopy revealed elemental composition of the AgNPs. The performance of S. trilobatum bark extract-capped AgNPs in terms of inhibition of microbial growth was studied by disc diffusion and well diffusion assays. Eco-friendly synthesized S. trilobatum extract-capped AgNPs were found to possess enhanced antimicrobial properties: growth inhibition of gram-negative and gram-positive bacteria and of fungal species. These results demonstrated the potential applications of the indigenous medicinal plants to the field of nanotechnology.

Exploratory Investigation of Chitosan as Mordant for Eco-Friendly Antibacterial Printing of Cotton with Natural Dyes

OpenAIRE

M. D. Teli; Javed Sheikh; Pragati Shastrakar

2013-01-01

Although a lot of antibacterial finishes are available for cotton, the user safety and durability of the finish are always the important issues. Some of the natural dyes are known to possess antibacterial properties; however, most of them are nonsubstantive. Hence, they are used in conjunction with eco-friendly natural mordants. Although metallic mordants are effective, they are environmentally pollutants, hence not desirable. In the current work, the novel natural mordant like chitosan with ...

Going Green in Business - A Study on the Eco-friendly Initiatives towards Sustainable Development in India

OpenAIRE

Pradeep M. D

2017-01-01

Increasing awareness on the various environmental problems has led to a shift in consumer behaviour. There has been a change in consumer attitude towards a green lifestyle. Thus green Marketing has evolved special implications in the modern market. Green indicates purity through quality, fairness in price and worthy in dealings. Green marketing focuses on marketing eco-friendly products to satisfy the needs and wants of the customers. It adopts innovative techniques of product modification, d...

ECOS E-MATRIX Methane and Volatile Organic Carbon (VOC) Emissions Best Practices Database

Energy Technology Data Exchange (ETDEWEB)

Parisien, Lia [The Environmental Council Of The States, Washington, DC (United States)

2016-01-31

This final scientific/technical report on the ECOS e-MATRIX Methane and Volatile Organic Carbon (VOC) Emissions Best Practices Database provides a disclaimer and acknowledgement, table of contents, executive summary, description of project activities, and briefing/technical presentation link.

From an eco-fairy tale to an environmentally friendly lifestyle. An eco-friendly reading project by Agnieszka Marzęcka

Directory of Open Access Journals (Sweden)

Anna Kapusta

2012-06-01

Full Text Available The article is concerning on the eco-critical literary phenomenon on the perspective of new species polish eco-fairy tale. The fabulous tale about ecological style of life (The metaphorical ecology of human biography was ilustrated by the Agnieszka Marzęcka's modernity tune entitled The Victory of King of Cleanness.

Eco-friendly electron beam lithography using water-developable resist material derived from biomass

Science.gov (United States)

Takei, Satoshi; Oshima, Akihiro; Wakabayashi, Takanori; Kozawa, Takahiro; Tagawa, Seiichi

2012-07-01

We investigated the eco-friendly electron beam (EB) lithography using a high-sensitive negative type of water-developable resist material derived from biomass on hardmask layer for tri-layer processes. A water developable, non-chemically amplified, high sensitive, and negative tone resist material in EB lithography was developed for environmental affair, safety, easiness of handling, and health of the working people, instead of the common developable process of trimethylphenylammonium hydroxide. The images of 200 nm line and 800 nm space pattern with exposure dose of 7.0 μC/cm2 and CF4 etching selectivity of 2.2 with hardmask layer were provided by specific process conditions.

Eco-friendly approach for nanoparticles synthesis and mechanism behind antibacterial activity of silver and anticancer activity of gold nanoparticles.

Science.gov (United States)

Patil, Maheshkumar Prakash; Kim, Gun-Do

2017-01-01

This review covers general information about the eco-friendly process for the synthesis of silver nanoparticles (AgNP) and gold nanoparticles (AuNP) and focuses on mechanism of the antibacterial activity of AgNPs and the anticancer activity of AuNPs. Biomolecules in the plant extract are involved in reduction of metal ions to nanoparticle in a one-step and eco-friendly synthesis process. Natural plant extracts contain wide range of metabolites including carbohydrates, alkaloids, terpenoids, phenolic compounds, and enzymes. A variety of plant species and plant parts have been successfully extracted and utilized for AgNP and AuNP syntheses. Green-synthesized nanoparticles eliminate the need for a stabilizing and capping agent and show shape and size-dependent biological activities. Here, we describe some of the plant extracts involved in nanoparticle synthesis, characterization methods, and biological applications. Nanoparticles are important in the field of pharmaceuticals for their strong antibacterial and anticancer activity. Considering the importance and uniqueness of this concept, the synthesis, characterization, and application of AgNPs and AuNPs are discussed in this review.

Processing and properties of eco-friendly bio-nanocomposite films filled with cellulose nanocrystals from sugarcane bagasse.

Science.gov (United States)

El Achaby, Mounir; El Miri, Nassima; Aboulkas, Adil; Zahouily, Mohamed; Bilal, Essaid; Barakat, Abdellatif; Solhy, Abderrahim

2017-03-01

Novel synthesis strategy of eco-friendly bio-nanocomposite films have been exploited using cellulose nanocrystals (CNC) and polyvinyl alcohol/carboxymethyl cellulose (PVA/CMC) blend matrix as a potential in food packaging application. The CNC were extracted from sugarcane bagasse using sulfuric acid hydrolysis, and they were successfully characterized regarding their morphology, size, crystallinity and thermal stability. Thereafter, PVA/CMC-CNC bio-nanocomposite films, at various CNC contents (0.5-10wt%), were fabricated by the solvent casting method, and their properties were investigated. It was found that the addition of 5wt% CNC within a PVA/CMC increased the tensile modulus and strength by 141% and 83% respectively, and the water vapor permeability was reduced by 87%. Additionally, the bio-nanocomposites maintained the same transparency level of the PVA/CMC blend film (transmittance of ∼90% in the visible region), suggesting that the CNC were dispersed at the nanoscale. In these bio-nanocomposites, the adhesion properties and the large number of functional groups that are present in the CNC's surface and the macromolecular chains of the PVA/CMC blend are exploited to improve the interfacial interactions between the CNC and the blend. Consequently, these eco-friendly structured bio-nanocomposites with superior properties are expected to be useful in food packaging applications. Copyright © 2016. Published by Elsevier B.V.

Process Optimization of Eco-Friendly Flame Retardant Finish for Cotton Fabric: a Response Surface Methodology Approach

Science.gov (United States)

Yasin, Sohail; Curti, Massimo; Behary, Nemeshwaree; Perwuelz, Anne; Giraud, Stephane; Rovero, Giorgio; Guan, Jinping; Chen, Guoqiang

The n-methylol dimethyl phosphono propionamide (MDPA) flame retardant compounds are predominantly used for cotton fabric treatments with trimethylol melamine (TMM) to obtain better crosslinking and enhanced flame retardant properties. Nevertheless, such treatments are associated with a toxic issue of cancer-causing formaldehyde release. An eco-friendly finishing was used to get formaldehyde-free fixation of flame retardant to the cotton fabric. Citric acid as a crosslinking agent along with the sodium hypophosphite as a catalyst in the treatment was utilized. The process parameters of the treatment were enhanced for optimized flame retardant properties, in addition, low mechanical loss to the fabric by response surface methodology using Box-Behnken statistical design experiment methodology was achieved. The effects of concentrations on the fabric’s properties (flame retardancy and mechanical properties) were evaluated. The regression equations for the prediction of concentrations and mechanical properties of the fabric were also obtained for the eco-friendly treatment. The R-squared values of all the responses were above 0.95 for the reagents used, indicating the degree of relationship between the predicted values by the Box-Behnken design and the actual experimental results. It was also found that the concentration parameters (crosslinking reagents and catalysts) in the treatment formulation have a prime role in the overall performance of flame retardant cotton fabrics.

Application of eco-friendly antimicrobial finish butea monosperma leaves on fabric properties of polyester and cotton/polyester

International Nuclear Information System (INIS)

Sadaf, S.; Saeed, M.; Kalsoom, S.; Saeed, M.

2017-01-01

The study was aimed to check the effect of eco-friendly antimicrobial finish on 100% polyester and 50/50 cotton/polyester woven fabrics. The leaves' extract of Butea monosperma was used as an eco-friendly antimicrobial finish. The fabric was first desized, scoured, bleached and washed then antimicrobial finish was applied by using pad dry cure method. The aesthetic, comfort and mechanical fabrics properties were checked before and after applying antimicrobial finish. Under aesthetic property stiffness and smoothness appearance was checked, under comfort related property absorbency and air permeability was checked and under mechanical property tear and tensile strength was checked. The antimicrobial finish was checked by using ASTEM E2149 Shake Flask method. The AATCC and ISO standard testing methods were used for checking fabric properties. One way ANOVA statistical test was applied for analysis of results. Antimicrobial finish has increased aesthetic (stiffness, smoothness appearance), comfort (absorbency, air permeability) and mechanical (tensile and tear strengths) properties of polyester and cotton/polyester fabrics. The antimicrobial finish was effective on both 100% polyester and 50/50 cotton/polyester fabrics up to 25 washes. This study is beneficial to medical industry, paramedical staff, sports wears, home furnishing as well as common people. (author)

Feedback-Based Eco-Design for Integrating the Recency, Frequency, and Monetary Value of Eco-Efficiency into Sustainability Management

Directory of Open Access Journals (Sweden)

Rui Yang Chen

2016-09-01

Full Text Available Customer feedback is used to understand customer requirements. Early design phases require the consideration of items including manufacturing, the environment, and sustainability management. Therefore, it is crucial that eco-efficiency is taken into account in the early design phases. Traditionally, eco-efficiency is considered only in terms of eco-design issues, not customer requirements based on business values such as Recency, Frequency, and Monetary (RFM value. In the meantime, integrating innovation from eco-design is one important aspect. Here, I propose that customer feedback-based eco-efficiency and TRIZ-based innovation can be considered in early eco-design based on the RFM value for sustainability management. The analytic hierarchy process (AHP and fuzzy-based AHP were integrated to explore the relative weights of RFM variables for business value evaluation. The innovative method of the paper is using a TRIZ contradiction matrix associated with engineering parameters for eco-design. The experimental study has been carried out, and it meets the forecasting business value for green product usage. The business value was used as the decision-making factor in order to evaluate both environmental and marketing performance.

Eco-friendly synthesis, physicochemical studies, biological assay and molecular docking of steroidal oxime-ethers

Science.gov (United States)

Alam, Mahboob; Lee, Dong-Ung

2015-01-01

The aim of this study was to report the synthesis of biologically active compounds; 7-(2′-aminoethoxyimino)-cholest-5-ene (4), a steroidal oxime-ether and its derivatives (5, 6) via a facile microwave assisted solvent free reaction methodology. This new synthetic, eco-friendly, sustainable protocol resulted in a remarkable improvement in the synthetic efficiency (85-93 % yield) and high purity using basic alumina. The synthesized compounds were screened for their antibacterial against six bacterial strains by disc diffusion method and antioxidant potential by DPPH assay. The binding capabilities of a compound 6 exhibiting good antibacterial potential were assessed on the basis of molecular docking studies and four types of three-dimensional molecular field descriptors. Moreover the structure-antimicrobial activity relationships were studied using some physicochemical and quantum-chemical parameters with GAMESS interface as well as WebMO Job Manager by using the basic level of theory. Hence, this synthetic approach is believed to provide a better scope for the synthesis of steroidal oxime-ether analogues and will be a more practical alternative to the presently existing procedures. Moreover, detailed in silico docking studies suggested the plausible mechanism of steroidal oxime-ethers as effective antimicrobial agents. PMID:27330525

Material and Structural Performance Evaluations of Hwangtoh Admixtures and Recycled PET Fiber-Added Eco-Friendly Concrete for CO₂ Emission Reduction.

Science.gov (United States)

Koo, Bon-Min; Kim, Jang-Ho Jay; Kim, Sung-Bae; Mun, Sungho

2014-08-19

In order to reduce carbon dioxide (CO₂) emissions and produce an eco-friendly construction material, a type of concrete that uses a minimal amount of cement, yet still retains equivalent properties to ordinary cement concrete, has been developed and studied all over the world. Hwangtoh, a type of red clay broadly deposited around the world, has traditionally been considered an eco-friendly construction material, with bonus advantages of having health and cost benefits. Presently, Hwangtoh is not commonly used as a modern construction material due to properties such as low strength and high rates of shrinkage cracking. Recent studies, however, have shown that Hwangtoh can be used as a mineral admixture to improve the strength of concrete. In addition, polyethylene terephthalate (PET) fibers recycled from PET bottle waste can be used to control shrinkage cracks in Hwangtoh concrete. Therefore, in this study, performance verification is conducted on newly developed Hwangtoh concrete mixed with short recycled PET fibers. The results show that Hwangtoh concrete has compressive strength, elastic modulus, and pH properties that are similar to these features in ordinary cement concrete. The properties of carbonation depth and creep strain of Hwangtoh concrete, however, are larger and smaller, respectively, than in ordinary cement concrete. According to flexural tests, reinforced concrete (RC) specimens cast with Hwangtoh admixtures (with and without PET fibers) possess similar or better capacities than ordinary RC specimens. The addition of PET fibers significantly improves the structural ductility of RC specimens under normal environmental conditions. However, the implementations of the concrete in aggressive environment must be carefully considered, since a previous study result indicates degradation of its durability performance in aggressive environments, such as seawater [1]. The results of this study validate the possibility of using eco-friendly Hwangtoh concrete

Quadratic nonlinear optics to assess the morphology of riboflavin doped chitosan for eco-friendly lithography

Science.gov (United States)

Ray, Cédric; Caillau, Mathieu; Jonin, Christian; Benichou, Emmanuel; Moulin, Christophe; Salmon, Estelle; Maldonado, Melissa E.; Gomes, Anderson S. L.; Monnier, Virginie; Laurenceau, Emmanuelle; Leclercq, Jean-Louis; Chevolot, Yann; Delair, Thierry; Brevet, Pierre-François

2018-06-01

We report the use of the Second Harmonic Generation response from a riboflavin doped chitosan film as a characterization method of the film morphology. This film is of particular interest in the development of new and bio-sourced material for eco-friendly UV lithography. The method allows us to determine how riboflavin is distributed as a function of film depth in the sample. This possibility is of importance in order to have a better understanding of the riboflavin influence in chitosan films during the lithography process. On the contrary, linear optical techniques provide no information beyond the mere confirmation of the riboflavin presence.

Improvement in electrical characteristics of eco-friendly indium zinc oxide thin-film transistors by photocatalytic reaction.

Science.gov (United States)

Kang, Jun Ki; Park, Sung Pyo; Na, Jae Won; Lee, Jin Hyeok; Kim, Dongwoo; Kim, Hyun Jae

2018-05-11

Eco-friendly solution-processed oxide thin-film transistors (TFTs) were fabricated through photocatalytic reaction of titanium dioxide (PRT). The titanium dioxide (TiO 2 ) surface reacts with H 2 O under ultraviolet (UV) light irradiation and generates hydroxyl radicals (OH∙). These hydroxyl radicals accelerate the decomposition of large organic compounds such as 2-methoxyethanol (2ME; one of the representative solvents for solution-processed metal oxides), creating smaller organic molecular structures compared with 2ME. The decomposed small organic materials have low molar masses and low boiling points, which help improving electrical properties via diminishing defect sites in oxide channel layers and fabricating low temperature solution-processed oxide TFTs. As a result, the field-effect mobility improved from 4.29 to 10.24 cm 2 /V·s for IGZO TFTs and from 2.78 to 7.82 cm 2 /V·s for IZO TFTs, and the V th shift caused by positive bias stress (PBS) and negative bias illumination stress (NBIS) over 1,000 s under 5,700 lux decreased from 6.2 to 2.9 V and from 15.3 to 2.8 V, respectively. In theory, TiO 2 has a permanent photocatalytic reaction; as such, hydroxyl radicals are generated continuously under UV irradiation, improving the electrical characteristics of solution-processed IZO TFTs even after four iterations of TiO 2 recycling in this study. Thus, the PRT method provides an eco-friendly approach for high-performance solution-processed oxide TFTs.

Eco-Friendly Insecticide Discovery via Peptidomimetics: Design, Synthesis, and Aphicidal Activity of Novel Insect Kinin Analogues.

Science.gov (United States)

Zhang, Chuanliang; Qu, Yanyan; Wu, Xiaoqing; Song, Dunlun; Ling, Yun; Yang, Xinling

2015-05-13

Insect kinin neuropeptides are pleiotropic peptides that are involved in the regulation of hindgut contraction, diuresis, and digestive enzyme release. They share a common C-terminal pentapeptide sequence of Phe(1)-Xaa(2)-Yaa(3)-Trp(4)-Gly(5)-NH2 (where Xaa(2) = His, Asn, Phe, Ser, or Tyr; Yaa(3) = Pro, Ser, or Ala). Recently, the aphicidal activity of insect kinin analogues has attracted the attention of researchers. Our previous work demonstrated that the sequence-simplified insect kinin pentapeptide analogue Phe-Phe-[Aib]-Trp-Gly-NH2 could retain good aphicidal activity and be the lead compound for the further discovery of eco-friendly insecticides which encompassed a broad array of biochemicals derived from micro-organisms and other natural sources. Using the peptidomimetics strategy, we chose Phe-Phe-[Aib]-Trp-Gly-NH2 as the lead compound, and we designed and synthesized three series, including 31 novel insect kinin analogues. The aphicidal activity of the new analogues against soybean aphid was determined. The results showed that all of the analogues exhibited aphicidal activity. Of particular interest was the analogue II-1, which exhibited improved aphicidal activity with an LC50 of 0.019 mmol/L compared with the lead compound (LC50 = 0.045 mmol/L) or the commercial insecticide pymetrozine (LC50 = 0.034 mmol/L). This suggests that the analogue II-1 could be used as a new lead for the discovery of potential eco-friendly insecticides.

The use of Euphorbia falcata extract as eco-friendly corrosion inhibitor of carbon steel in hydrochloric acid solution

International Nuclear Information System (INIS)

El Bribri, A.; Tabyaoui, M.; Tabyaoui, B.; El Attari, H.; Bentiss, F.

2013-01-01

Euphorbia falcata L. extract (EFE) was investigated as eco-friendly corrosion inhibitor of carbon steel in 1 M HCl using gravimetric, ac impedance, polarization and scanning electron microscopy (SEM) techniques. The experimental results show that EFE is good corrosion inhibitor and the protection efficiency is increased with the EEF concentration. The results obtained from weight loss and ac impedance studies were in reasonable agreement. Impedance experimental data revealed a frequency distribution of the capacitance, simulated as constant phase element. Polarization curves indicated that EFE is a mixed inhibitor. The corrosion inhibition was assumed to occur via adsorption of EFE molecules on the metal surface. The adsorption of the E. falcata extract was well described by the Langmuir adsorption isotherm. The calculated ΔG ads o value showed that the corrosion inhibition of the carbon steel in 1 M HCl is mainly controlled by a physisorption process. - Graphical abstract: Display Omitted - Highlights: • EFE is a good eco-friendly inhibitor for the corrosion of carbon steel in 1 M HCl. • EFE acts as mixed-type inhibitor in 1 M HCl medium. • Weight loss, ac impedance and polarization methods are in reasonable agreement. • The adsorption of EFE is well described by the Langmuir adsorption isotherm

An eco-friendly dyeing of woolen yarn by Terminalia chebula extract with evaluations of kinetic and adsorption characteristics.

Science.gov (United States)

Shabbir, Mohd; Rather, Luqman Jameel; Shahid-Ul-Islam; Bukhari, Mohd Nadeem; Shahid, Mohd; Ali Khan, Mohd; Mohammad, Faqeer

2016-05-01

In the present study Terminalia chebula was used as an eco-friendly natural colorant for sustainable textile coloration of woolen yarn with primary emphasis on thermodynamic and kinetic adsorption aspects of dyeing processes. Polyphenols and ellagitannins are the main coloring components of the dye extract. Assessment of the effect of pH on dye adsorption showed an increase in adsorption capacity with decreasing pH. Effect of temperature on dye adsorption showed 80 °C as optimum temperature for wool dyeing with T. chebula dye extract. Two kinetic equations, namely pseudo first-order and pseudo second-order equations, were employed to investigate the adsorption rates. Pseudo second-order model provided the best fit (R (2) = 0.9908) to the experimental data. The equilibrium adsorption data were fitted by Freundlich and Langmuir isotherm models. The adsorption behavior accorded well (R (2) = 0.9937) with Langmuir isotherm model. Variety of eco-friendly and sustainable shades were developed in combination with small amount of metallic mordants and assessed in terms of colorimetric (CIEL(∗) a (∗) b (∗) and K/S) properties measured using spectrophotometer under D65 illuminant (10° standard observer). The fastness properties of dyed woolen yarn against light, washing, dry and wet rubbing were also evaluated.

An eco-friendly dyeing of woolen yarn by Terminalia chebula extract with evaluations of kinetic and adsorption characteristics

Science.gov (United States)

Shabbir, Mohd; Rather, Luqman Jameel; Shahid-ul-Islam; Bukhari, Mohd Nadeem; Shahid, Mohd; Ali Khan, Mohd; Mohammad, Faqeer

2016-01-01

In the present study Terminalia chebula was used as an eco-friendly natural colorant for sustainable textile coloration of woolen yarn with primary emphasis on thermodynamic and kinetic adsorption aspects of dyeing processes. Polyphenols and ellagitannins are the main coloring components of the dye extract. Assessment of the effect of pH on dye adsorption showed an increase in adsorption capacity with decreasing pH. Effect of temperature on dye adsorption showed 80 °C as optimum temperature for wool dyeing with T. chebula dye extract. Two kinetic equations, namely pseudo first-order and pseudo second-order equations, were employed to investigate the adsorption rates. Pseudo second-order model provided the best fit (R2 = 0.9908) to the experimental data. The equilibrium adsorption data were fitted by Freundlich and Langmuir isotherm models. The adsorption behavior accorded well (R2 = 0.9937) with Langmuir isotherm model. Variety of eco-friendly and sustainable shades were developed in combination with small amount of metallic mordants and assessed in terms of colorimetric (CIEL∗a∗b∗ and K/S) properties measured using spectrophotometer under D65 illuminant (10° standard observer). The fastness properties of dyed woolen yarn against light, washing, dry and wet rubbing were also evaluated. PMID:27222752

The Economic Value of Corporate Eco-Efficiency

International Nuclear Information System (INIS)

Guenster, N.; Derwall, J.; Bauer, R.; Koedijk, K.

2006-08-01

This study adds new insights to the long-running corporate environmental-financial performance debate by focusing on the concept of eco-efficiency. Using a new database of eco-efficiency ratings, we analyze the relation between eco-efficiency and financial performance from 1997 to 2004. We report that eco-efficiency relates positively to operating performance and market value. Moreover, our results suggest that the market's valuation of environmental performance has been time variant, which may indicate that the market incorporates environmental information with a drift. Although environmental leaders initially did not sell at a premium relative to laggards, the valuation differential increased significantly over time. Our results have implications for company managers, who evidently do not have to overcome a tradeoff between eco-efficiency and financial performance, and for investors, who can exploit environmental information for investment decisions

Trust and responsible eco managing. The case of state controlled repacking

DEFF Research Database (Denmark)

Rittenhofer, Iris

systems. It takes a postmodern stance and discusses the case from the perspective of trust, responsible management, cosmopolitanization, the ‘transparent society’ and ‘green growth’ strategies. In the concluding section, the implications for the further development of a concept ‘responsible management......The paper is concerned with a case of local management of eco certification. With outset in a case study, the paper explores the relation of eco certification to economy, society and culture. The paper emphasizes the multidimensional quality of local eco management of global organic agrifood......’ are discussed and suggestions for future research are made. The paper draws on multidisciplinary research from management and business studies, intercultural and cross-cultural communication, trust research, cultural studies, philosophy and discourse studies....

Material and Structural Performance Evaluations of Hwangtoh Admixtures and Recycled PET Fiber-Added Eco-Friendly Concrete for CO2 Emission Reduction

Directory of Open Access Journals (Sweden)

Bon-Min Koo

2014-08-01

Full Text Available In order to reduce carbon dioxide (CO2 emissions and produce an eco-friendly construction material, a type of concrete that uses a minimal amount of cement, yet still retains equivalent properties to ordinary cement concrete, has been developed and studied all over the world. Hwangtoh, a type of red clay broadly deposited around the world, has traditionally been considered an eco-friendly construction material, with bonus advantages of having health and cost benefits. Presently, Hwangtoh is not commonly used as a modern construction material due to properties such as low strength and high rates of shrinkage cracking. Recent studies, however, have shown that Hwangtoh can be used as a mineral admixture to improve the strength of concrete. In addition, polyethylene terephthalate (PET fibers recycled from PET bottle waste can be used to control shrinkage cracks in Hwangtoh concrete. Therefore, in this study, performance verification is conducted on newly developed Hwangtoh concrete mixed with short recycled PET fibers. The results show that Hwangtoh concrete has compressive strength, elastic modulus, and pH properties that are similar to these features in ordinary cement concrete. The properties of carbonation depth and creep strain of Hwangtoh concrete, however, are larger and smaller, respectively, than in ordinary cement concrete. According to flexural tests, reinforced concrete (RC specimens cast with Hwangtoh admixtures (with and without PET fibers possess similar or better capacities than ordinary RC specimens. The addition of PET fibers significantly improves the structural ductility of RC specimens under normal environmental conditions. However, the implementations of the concrete in aggressive environment must be carefully considered, since a previous study result indicates degradation of its durability performance in aggressive environments, such as seawater [1]. The results of this study validate the possibility of using eco-friendly

Material and Structural Performance Evaluations of Hwangtoh Admixtures and Recycled PET Fiber-Added Eco-Friendly Concrete for CO2 Emission Reduction

Science.gov (United States)

Koo, Bon-Min; Kim, Jang-Ho Jay; Kim, Sung-Bae; Mun, Sungho

2014-01-01

In order to reduce carbon dioxide (CO2) emissions and produce an eco-friendly construction material, a type of concrete that uses a minimal amount of cement, yet still retains equivalent properties to ordinary cement concrete, has been developed and studied all over the world. Hwangtoh, a type of red clay broadly deposited around the world, has traditionally been considered an eco-friendly construction material, with bonus advantages of having health and cost benefits. Presently, Hwangtoh is not commonly used as a modern construction material due to properties such as low strength and high rates of shrinkage cracking. Recent studies, however, have shown that Hwangtoh can be used as a mineral admixture to improve the strength of concrete. In addition, polyethylene terephthalate (PET) fibers recycled from PET bottle waste can be used to control shrinkage cracks in Hwangtoh concrete. Therefore, in this study, performance verification is conducted on newly developed Hwangtoh concrete mixed with short recycled PET fibers. The results show that Hwangtoh concrete has compressive strength, elastic modulus, and pH properties that are similar to these features in ordinary cement concrete. The properties of carbonation depth and creep strain of Hwangtoh concrete, however, are larger and smaller, respectively, than in ordinary cement concrete. According to flexural tests, reinforced concrete (RC) specimens cast with Hwangtoh admixtures (with and without PET fibers) possess similar or better capacities than ordinary RC specimens. The addition of PET fibers significantly improves the structural ductility of RC specimens under normal environmental conditions. However, the implementations of the concrete in aggressive environment must be carefully considered, since a previous study result indicates degradation of its durability performance in aggressive environments, such as seawater [1]. The results of this study validate the possibility of using eco-friendly Hwangtoh concrete

A Review on Antihyperglycemic and Antihepatoprotective Activity of Eco-Friendly Punica granatum Peel Waste

Science.gov (United States)

Middha, Sushil Kumar; Usha, Talambedu; Pande, Veena

2013-01-01

Over the past decade, pomegranate (Punica granatum) is entitled as a wonder fruit because of its voluminous pharmacological properties. In 1830, P. granatum fruit was first recognized in United States Pharmacopeia; the Philadelphia edition introduced the rind of the fruit, the New York edition the bark of the root and further 1890 edition the stem bark was introduced. There are significant efforts and progress made in establishing the pharmacological mechanisms of peel (pericarp or rind) and the individual constituents responsible for them. This review provides an insight on the phytochemical components that contribute too antihyperglycemic, hepatoprotective, antihyperlipidemic effect, and numerous other effects of wonderful, economic, and eco-friendly pomegranate peel extract (PP). PMID:23878603

Evaluating Eco-Innovation of OECD Countries with Data Envelopment Analysis

Science.gov (United States)

Mavi, Reza Kiani; Standing, Craig

2016-01-01

Government regulations require businesses to improve their processes and products/services in a green and sustainable manner. For being environmentally friendly, businesses should invest more on eco-innovation practices. Firms eco-innovate to promote eco-efficiency and sustainability. This paper evaluates the eco-innovation performance of…

Nitrogen and phosphorus treatment of marine wastewater by a laboratory-scale sequencing batch reactor with eco-friendly marine high-efficiency sediment.

Science.gov (United States)

Cho, Seonghyeon; Kim, Jinsoo; Kim, Sungchul; Lee, Sang-Seob

2017-06-22

We screened and identified a NH 3 -N-removing bacterial strain, Bacillus sp. KGN1, and a [Formula: see text] removing strain, Vibrio sp. KGP1, from 960 indigenous marine isolates from seawater and marine sediment from Tongyeong, South Korea. We developed eco-friendly high-efficiency marine sludge (eco-HEMS), and inoculated these marine bacterial strains into the marine sediment. A laboratory-scale sequencing batch reactor (SBR) system using the eco-HEMS for marine wastewater from land-based fish farms improved the treatment performance as indicated by 88.2% removal efficiency (RE) of total nitrogen (initial: 5.6 mg/L) and 90.6% RE of total phosphorus (initial: 1.2 mg/L) under the optimal operation conditions (food and microorganism (F/M) ratio, 0.35 g SCOD Cr /g mixed liquor volatile suspended solids (MLVSS)·d; dissolved oxygen (DO) 1.0 ± 0.2 mg/L; hydraulic retention time (HRT), 6.6 h; solids retention time (SRT), 12 d). The following kinetic parameters were obtained: cell yield (Y), 0.29 g MLVSS/g SCOD Cr ; specific growth rate (µ), 0.06 d -1 ; specific nitrification rate (SNR), 0.49 mg NH 3 -N/g MLVSS·h; specific denitrification rate (SDNR), 0.005 mg [Formula: see text]/g MLVSS·h; specific phosphorus uptake rate (SPUR), 0.12 mg [Formula: see text]/g MLVSS·h. The nitrogen- and phosphorus-removing bacterial strains comprised 18.4% of distribution rate in the microbial community of eco-HEMS under the optimal operation conditions. Therefore, eco-HEMS effectively removed nitrogen and phosphorus from highly saline marine wastewater from land-based fish farms with improving SNR, SDNR, and SPUR values in more diverse microbial communities. DO: dissolved oxygen; Eco-HEMS: eco-friendly high efficiency marine sludge; F/M: food and microorganism ratio; HRT: hydraulic retention time; ML(V)SS: mixed liquor (volatile) suspended solids; NCBI: National Center for Biotechnology Information; ND: not determined; qPCR: quantitative real-time polymerase

CHARACTERIZATION AND DEVELOPMENT OF ECO-FRIENDLY CONCRETE USING INDUSTRIAL WASTE – A REVIEW

Directory of Open Access Journals (Sweden)

Rajesh Kumar

2014-01-01

Full Text Available At present in India, about 960 million metric tons of solid was te is being generated annually as byproducts during industrial, mining, municipal, agricultural and other processes. Advances in solid waste management resulted in alter native construction materials as a substitute to traditional materials like bricks, blocks, tiles, aggregates, ceramics, cement, lime, soil, timber and paint. To safeguard th e environment, efforts are being made for recycling different wastes and to utilize th em in value added applications. The cement industries have been making significan t progress in reducing carbon dioxide (CO 2 emissions through improvements in process technology and enhancements in process efficiency, but further improvements ar e limited because CO 2 production is inherent to the basic process of calcinations of limestone. In the past two decades, various investigations have been conducted on industri al wastes like flyash, blast furnace slag, Silica fume, rice husks and other industria l waste materials to act as cement replacements .This paper consist of a review extensively conducted on publications related to utilization of waste materials as cemen t replacement with an intention to develop a process so as to produce an eco-friendly concrete having similar or higher strength and thus simultaneously providing a remedy t o environmental hazards resulting from waste material disposal.

Novel application of bacteriophage for controlling foaming in wastewater treatment plant- an eco-friendly approach

Science.gov (United States)

Khairnar, Krishna; Chandekar, Rajshree; Nair, Aparna; Pal, Preeti; Paunikar, Waman N.

2016-01-01

ABSTRACT This addendum to “Novel application of bacteriophage for controlling foaming in wastewater treatment plant- an eco-friendly approach “ includes characteristics of the phages NOC1, NOC2 and NOC3 not discussed in the previous paper. The phage adsorption and host interaction properties, their sensitivity to pH and temperature are inferred. NOC2 is seen to be more temperature resistant while others are not. All the phages show pH sensitivity. There is a variance observed in the behavior of these phages. Also, applicability of the phage based system to large scale reactors is studied and discussed here. PMID:26890996

Effect of Hydraulic Activity on Crystallization of Precipitated Calcium Carbonate (PCC) for Eco-Friendly Paper

Science.gov (United States)

Kim, Jung-Ah; Han, Gi-Chun; Lim, Mihee; You, Kwang-Suk; Ryu, Miyoung; Ahn, Ji-Whan; Fujita, Toyohisa; Kim, Hwan

2009-01-01

Wt% of aragonite, a CaCO3 polymorph, increased with higher hydraulic activity (°C) of limestone in precipitated calcium carbonate (PCC) from the lime-soda process (Ca(OH)2-NaOH-Na2CO3). Only calcite, the most stable polymorph, was crystallized at hydraulic activity under 10 °C, whereas aragonite also started to crystallize over 10 °C. The crystallization of PCC is more dependent on the hydraulic activity of limestone than CaO content, a factor commonly used to classify limestone ores according to quality. The results could be effectively applied to the determination of polymorphs in synthetic PCC for eco-friendly paper manufacture. PMID:20087470

Eco-friendly polyvinyl alcohol/carboxymethyl cellulose hydrogels reinforced with graphene oxide and bentonite for enhanced adsorption of methylene blue.

Science.gov (United States)

Dai, Hongjie; Huang, Yue; Huang, Huihua

2018-04-01

Eco-friendly polyvinyl alcohol/carboxymethyl cellulose (isolated from pineapple peel) hydrogels reinforced with graphene oxide and bentonite were prepared as efficient adsorbents for methylene blue (MB). The structure and morphology of the prepared hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), X-ray diffraction (XRD), thermogravimetry (TG) and differential scanning calorimetry (DSC). Introducing graphene oxide and bentonite into the hydrogels evidently enhanced the thermal stability, swelling ability and MB adsorption capacity. The effects of initial concentration of MB, pH, contact time and temperature on MB adsorption capacity of the prepared hydrogels were investigated. Adsorption kinetics and equilibrium adsorption isotherm fitted pseudo-second-order kinetic model and Langmuir isotherm model well, respectively. After introducing graphene oxide and bentonite into the hydrogels, the maximum adsorption capacity calculated from the Langmuir isotherm model reached 172.14 mg/g at 30 °C, obviously higher than the hydrogels prepared without these additions (83.33 mg/g). Furthermore, all the prepared hydrogels also displayed good reusability for the efficient removal of MB. Consequently, the prepared hydrogels could be served as eco-friendly, stable, efficient and reusable adsorbents for anionic dyes in wastewater treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Facile and eco-friendly fabrication of AgNPs coated silk for antibacterial and antioxidant textiles using honeysuckle extract.

Science.gov (United States)

Zhou, Yuyang; Tang, Ren-Cheng

2018-01-01

Recently, there is a growing trend towards the functionalization of silk through nanotechnology for the prevention of fiber damage from microbial attack and the enhancement of hygienic aspects. Considering sustainable development and environmental protection, the eco-friendly fabrication of silver nanoparticles (AgNPs)-modified silk using natural extracts has currently become a hot research area. This study presents a facile strategy for the fabrication of colorful and multifunctional silk fabric using biogenic AgNPs prepared by honeysuckle extract as natural reductant and stabilizing agents. The influences of pH and reactant concentrations on the AgNPs synthesis were investigated. The color characteristics and functionalities of AgNPs treated silk were evaluated. The results revealed that the particle size of AgNPs decreased with increasing pH. The diameter of AgNPs decreased with increasing amount of honeysuckle extract and reducing amount of silver nitrate. The transmission electron microscopy image showed that the AgNPs were spherical in shape with a narrow size distribution. The treated silk showed excellent antibacterial activities against E. coli and S. aureus, and certain antioxidant activity. Both of the antibacterial and antioxidant activities were well maintained even after 30 washing cycles. This work provides a sustainable and eco-friendly approach to the fabrication of AgNPs coated silk for colorful and long-term multifunctional textiles using honeysuckle extract. Copyright © 2017 Elsevier B.V. All rights reserved.

An eco-friendly, quick and cost-effective method for the quantification of acrylamide in cereal-based baby foods.

Science.gov (United States)

Cengiz, Mehmet Fatih; Gündüz, Cennet Pelin Boyacı

2014-09-01

The presence of acrylamide in cereal-based baby foods is a matter of great concern owing to its possible health effects. Derivatization followed by gas chromatography/mass spectrometry (GC/MS) is one of the most common methods to quantify acrylamide. However, it requires the use of toxic chemicals and is time-consuming. The aim of this study was to develop an eco-friendly, rapid and inexpensive method for the determination of acrylamide in cereal-based baby foods. The method involves defatting with n-hexane, extraction into water, precipitation of proteins, bromination, extraction into ethyl acetate and injection into a GC/MS system. The effects of defatting, precipitation, treatment with triethylamine, addition of internal standard and column selection were reviewed. A flow chart for acrylamide analysis was prepared. To evaluate the applicability of the method, 62 different cereal-based baby foods were analyzed. The levels of acrylamide ranged from not detected (below the limit of detection) to 660 µg kg(-1). The method is more eco-friendly and less expensive because it consumes very little solvent relative to other methods using bromine solutions and ethyl acetate. In addition, sample pre-treatment requires no solid phase extraction or concentration steps. The method is recommended for the determination of trace acrylamide in complex cereal-based baby food products. © 2014 Society of Chemical Industry.

Exploration and Practice of Green Building Management in Sino-Singapore Tianjin Eco-City

Institute of Scientific and Technical Information of China (English)

Sun; Xiaofeng; Song; Kun; Liu; Jinxin

2016-01-01

This paper summarizes the current development status of green building management in China, and analyzes the problems existing in its present management pattern. It fi rstly introduces the background, procedures and achievements gained during the green building practice in the Sino-Singapore Tianjin Eco-City, expounds the principles and methods of the establishment of the green building management system in this Tianjin Eco-City, and then focuses on practical experience and specifi c measures in separate parts of green building management system in the Tianjin EcoCity, which is constituted by laws, regulations and policies, technical standards, management process, product access, etc. Through exploration and practice, it took 8 years for the Sino-Singapore Tianjin Eco-City to preliminarily establish a set of management systems which were suited to its own characteristics. By introduction of the management system, this paper aims to provide reference for other cities to carry out green building practice and improve the quality of green buildings in China.

Eco-friendly GGBS Concrete: A State-of-The-Art Review

Science.gov (United States)

Saranya, P.; Nagarajan, Praveen; Shashikala, A. P.

2018-03-01

Concrete is the most commonly used material in the construction industry in which cement is its vital ingredient. Although the advantages of concrete are many, there are side effects leading to environmental issues. The manufacturing process of cement emits considerable amount of carbon dioxide (CO2). Therefore is an urgent need to reduce the usage of cement. Ground Granulated Blast furnace Slag (GGBS) is a by-product from steel industry. It has good structural and durable properties with less environmental effects. This paper critically reviews the literatures available on GGBS used in cement concrete. In this paper, the literature available on GGBS are grouped into engineering properties of GGBS concrete, hydraulic action of GGBS in concrete, durability properties of GGBS concrete, self- compacting GGBS concrete and ultrafine GGBS are highlighted. From the review of literature, it was found that the use of GGBS in concrete construction will be eco-friendly and economical. The optimum percentage of replacement of cement by GGBS lies between 40 - 45 % by weight. New materials that can be added in addition to GGBS for getting better strength and durability also highlighted.

ZETA POTENTIAL AND COLOR INVESTIGATIONS OF VEGETABLE OIL BASED EMULSIONS AS ECO-FRIENDLY LUBRICANTS

Directory of Open Access Journals (Sweden)

ROMICĂ CREŢU

2017-06-01

Full Text Available In the past 10 years, the need for biodegradable lubricants has been more and more emphasized. The use of vegetable oils as lubricants offers several advantages. The vegetable oils are biodegradable; thus, the environmental pollution is minimal either during or after their use. The aim of this paper is to presents a preliminary study concerning the influence of some preparation conditions on the stability of vegetable oil-in-water (O/W emulsions as eco-friendly lubricants stabilized by nonionic surfactant. In this context, vegetable oil-in-water emulsions characteristics where assessed using microscopically observation and zeta potential. In addition, the color of these emulsions can be evaluated. It can be observed that the emulsions tend to stabilize in time.

Knowledge management of eco-industrial park for efficient energy utilization through ontology-based approach

International Nuclear Information System (INIS)

Zhang, Chuan; Romagnoli, Alessandro; Zhou, Li; Kraft, Markus

2017-01-01

Highlights: •An intelligent energy management system for Eco-Industrial Park (EIP) is proposed. •An explicit domain ontology for EIP energy management is designed. •Ontology-based approach can increase knowledge interoperability within EIP. •Ontology-based approach can allow self-optimization without human intervention in EIP. •The proposed system harbours huge potential in the future scenario of Internet of Things. -- Abstract: An ontology-based approach for Eco-Industrial Park (EIP) knowledge management is proposed in this paper. The designed ontology in this study is formalized conceptualization of EIP. Based on such an ontological representation, a Knowledge-Based System (KBS) for EIP energy management named J-Park Simulator (JPS) is developed. By applying JPS to the solution of EIP waste heat utilization problem, the results of this study show that ontology is a powerful tool for knowledge management of complex systems such as EIP. The ontology-based approach can increase knowledge interoperability between different companies in EIP. The ontology-based approach can also allow intelligent decision making by using disparate data from remote databases, which implies the possibility of self-optimization without human intervention scenario of Internet of Things (IoT). It is shown through this study that KBS can bridge the communication gaps between different companies in EIP, sequentially more potential Industrial Symbiosis (IS) links can be established to improve the overall energy efficiency of the whole EIP.

Synthesis and characterization of cellulose acetate from rice husk: eco-friendly condition.

Science.gov (United States)

Das, Archana M; Ali, Abdul A; Hazarika, Manash P

2014-11-04

Cellulose acetate was synthesized from rice husk by using a simple, efficient, cost-effective and solvent-free method. Cellulose was isolated from rice husk (RH) using standard pretreatment method with dilute alkaline and acid solutions and bleaching with 2% H2O2. Cellulose acetate (CA) was synthesized successfully with the yield of 66% in presence of acetic anhydride and iodine as a catalyst in eco-friendly solvent-free conditions. The reaction parameters were standardized at 80 °C for 300 min and the optimum results were taken for further study. The extent of acetylation was evaluated from % yield and the degree of substitution (DS), which was determined by (1)H NMR and titrimetrically. The synthesized products were characterized with the help modern analytical techniques like FT-IR, (1)H NMR, XRD, etc. and the thermal behavior was evaluated by TGA and DSC thermograms. Copyright © 2014 Elsevier Ltd. All rights reserved.

Bio-inspired synthesis of Y2O3: Eu(3+) red nanophosphor for eco-friendly photocatalysis.

Science.gov (United States)

Prasanna kumar, J B; Ramgopal, G; Vidya, Y S; Anantharaju, K S; Daruka Prasad, B; Sharma, S C; Prashantha, S C; Premkumar, H B; Nagabhushana, H

2015-04-15

We report the synthesis of Y2O3: Eu(3+) (1-11 mol%) nanoparticles (NPs) with different morphologies via eco-friendly, inexpensive and simple low temperature solution combustion method using Aloe Vera gel as fuel. The formation of different morphologies of Y2O3: Eu(3+) NPs were characterized by PXRD, SEM, TEM, HRTEM, UV-Visible and PL techniques. The PXRD data and Rietveld analysis confirms the formation of single phase Y2O3 with cubic crystal structure. The influence of Eu(3+) ion concentration on the morphology, UV-Visible absorption, PL emission and photocatalytic activity of Y2O3: Eu(3+) nanostructures were investigated. Y2O3: Eu(3+) NPs exhibit intense red emission with CIE chromaticity coordinates (0.50, 0.47) and correlated color temperature values at different excitation ranges from 1868 to 2600 K. The control of Eu(3+) ion on Y2O3 matrix influences the photocatalytic decolorization of methylene blue (MB) as a model compound was evaluated under UVA light. Enhanced photocatalytic activity of conical shaped Y2O3: Eu(3+) (1 mol%) was attributed to dopant concentration, crystallite size, textural properties and capability of reducing the electron-hole pair recombination. The trend of inhibitory effect in the presence of different radical scavengers followed the order SO4(2-)>Cl(-)>C2H5OH>HCO3(-)>CO3(2-). These findings show great promise of Y2O3: Eu(3+) NPs as a red phosphor in warm white LEDs as well as eco-friendly heterogeneous photocatalysis. Copyright © 2015 Elsevier B.V. All rights reserved.

Eco-friendly synthesis of TiO2, Au and Pt doped TiO2 nanoparticles for dye sensitized solar cell applications and evaluation of toxicity

Science.gov (United States)

Gopinath, K.; Kumaraguru, S.; Bhakyaraj, K.; Thirumal, S.; Arumugam, A.

2016-04-01

Driven by the demand of pure TiO2, Au and Pt doped TiO2 NPs were successfully synthesized using Terminalia arjuna bark extract. The eco-friendly synthesized NPs were characterized by UV-Vis-DRS, ATR-FT-IR, PL, XRD, Raman, SEM with EDX and TEM analysis. The synthesized NPs were investigation for dye sensitized solar cell applications. UV-Vis-Diffused Reflectance Spectra clearly showed that the expected TiO2 inter band absorption below 306 nm, incorporation of gold shows surface plasma resonant (SPR) near 555 nm and platinum incorporated TiO2 NPs shows absorbance at 460 nm. The energy conversion efficiency for Au doped TiO2 NPs when compared to pure and Pt doped TiO2 NPs. In addition to that, Au noble metal present TiO2 matrix and an improve open-circuit voltage (Voc) of DSSC. Synthesized NPs was evaluated into antibacterial and antifungal activities by disk diffusion method. It is observed that NPs have not shown any activities in all tested bacterial and fungal strains. In this eco-friendly synthesis method to provide non toxic and environmental friendly nanomaterials can be used for solar energy device application.

Eco-friendly and green synthesis of silver nanoparticles using leaf extract of Strychnos potatorum Linn.F. and their bactericidal activities

OpenAIRE

Kagithoju, Srikanth; Godishala, Vikram; Nanna, Rama Swamy

2014-01-01

Inspired green synthesis of metallic nanoparticles is evolving as an important branch of nanotechnology. Traditionally these are manufactured by wet chemical methods which require toxic and flammable chemicals. We report for the first time an economic and eco-friendly green synthesis of silver nanoparticles using Strychnos potatorum aqueous leaf extract from 3 mM silver nitrate solution. Nanoparticles thus formed are confirmed and characterized by using UV–Vis absorption spectroscopy, SEM and...

Green Consumerism : an Eco-Friendly Behaviour Form Through The Green Product Consumption and Green Marketing

Directory of Open Access Journals (Sweden)

Wiwik Handayani

2017-09-01

Full Text Available This research is referred to analyse the influence of consumer attitude of green product towards purchase intention. The consumer attitude of green product is a psychological tendencies that is expressed by evaluating a certain entity with some advantage or disadvantage considerations. The problem of this research is the low of cunsumer awareness to consume green product, because the lack to comprehend the importance of green product usage for health and eco-friendly. The purpose of this research is to test the influence of consumer attitude of green products towards purchase intention. Hypothesis testing using Partial Least Square (PLS. The result of analysis show that there is influence among consumer attitude of green product towards consumer purchase intention significantly.

Liquid Salt as Green Solvent: A Novel Eco-Friendly Technique to Enhance Solubility and Stability of Poorly Soluble Drugs

Science.gov (United States)

Patel, Anant A.

As a result of tremendous efforts in past few decades, various techniques have been developed in order to resolve solubility issues associated with class II and IV drugs, However, majority of these techniques offer benefits associated with certain drawbacks; majorly including low drug loading, physical instability on storage and excessive use of environmentally challenging organic solvents. Hence, current effort was to develop an eco-friendly technique using liquid salt as green solvent, which can offer improvement in dissolution while maintaining long term stability. The liquid salt formulations (LSF) of poorly soluble model drugs ibuprofen, gemfibrozil and indomethacin were developed using 1-Ethyl-3-methylimidazolium ethyl sulfate (EMIM ES) as a non-toxic and environmentally friendly alternate to organic solvents. Liquid medications containing clear solutions of drug, EMIM ES and polysorbate 20, were adsorbed onto porous carrier Neusilin US2 to form free flowing powder. The LSF demonstrated greater rate and extent of dissolution compared to crystalline drugs. The dissolution data revealed that more than 80% drug release from LSF within 20 mins compared to less than 18% release from pure drugs. As high as 70% w/w liquid loading was achieved while maintaining good flowability and compressibility. In addition, the LSF samples exposed to high temperature and high humidity i.e. 40°C/80% RH for 8 weeks, demonstrated excellent physical stability without any signs of precipitation or crystallization. As most desirable form of administration is tablet, the developed liquid salt formulations were transformed into tablets using design of experiment approach by Design Expert Software. The tablet formulation composition and critical parameter were optimized using Box-Behnken Design. This innovative liquid salt formulation technique offered improvement in dissolution rate and extent as well as contributed to excellent physical stability on storage. Moreover, this formulation

Eco friendly nitration of toluene using modified zirconia

Directory of Open Access Journals (Sweden)

K.R. Sunaja Devi

2013-03-01

Full Text Available Nitration of toluene has been studied in the liquid phase over a series of modified zirconia catalysts.  Zirconia, zirconia- ceria (Zr0.98Ce0.02O2, sulfated zirconia and sulfated zirconia- ceria were synthesised by co precipitation method and were characterised by X-ray diffraction, BET surface area, Infra red spectroscopy analysis (FTIR, Thermogravimetric analysis (TGA, Scanning Electron Microscopy (SEM and Energy Dispersive X ray analysis (EDAX. The acidity of the prepared catalysts was determined by FTIR pyridine adsorption study. X-ray diffraction studies reveal that the catalysts prepared mainly consist of tetragonal phase with the crystallite size in the nano range and the tetragonal phase of zirconia is stabilized by the addition of ceria. The modified zirconia samples have higher surface area and exhibits uniform pore size distribution aggregated by zirconia nanoparticles. The onset of sulfate decomposition was observed around 723 K for sulfated samples. The catalytic performance was determined for the liquid phase nitration of toluene to ortho-, meta- and para- nitro toluene. The effect of reaction temperature, concentration of nitric acid, catalyst reusability and reaction time was also investigated. © 2013 BCREC UNDIP. All rights reservedReceived: 20th November 2012; Revised: 8th December 2012; Accepted: 7th January 2013[How to Cite: K. R. S. Devi, S. Jayashree, (2013. Eco friendly nitration of toluene using modified zirconia. Bulletin of Chemical Reaction Engineering & Catalysis, 7 (3: 205-214. (doi:10.9767/bcrec.7.3.4154.205-214][Permalink/DOI: http://dx.doi.org/10.9767/bcrec.7.3.4154.205-214 ] View in  |

Improved Eco-Friendly Recombinant Anabaena sp. Strain PCC7120 with Enhanced Nitrogen Biofertilizer Potential▿

Science.gov (United States)

Chaurasia, Akhilesh Kumar; Apte, Shree Kumar

2011-01-01

Photosynthetic, nitrogen-fixing Anabaena strains are native to tropical paddy fields and contribute to the carbon and nitrogen economy of such soils. Genetic engineering was employed to improve the nitrogen biofertilizer potential of Anabaena sp. strain PCC7120. Constitutive enhanced expression of an additional integrated copy of the hetR gene from a light-inducible promoter elevated HetR protein expression and enhanced functional heterocyst frequency in the recombinant strain. The recombinant strain displayed consistently higher nitrogenase activity than the wild-type strain and appeared to be in homeostasis with compatible modulation of photosynthesis and respiration. The enhanced combined nitrogen availability from the recombinant strain positively catered to the nitrogen demand of rice seedlings in short-term hydroponic experiments and supported better growth. The engineered strain is stable, eco-friendly, and useful for environmental application as nitrogen biofertilizer in paddy fields. PMID:21057013

Improved eco-friendly recombinant Anabaena sp. strain PCC7120 with enhanced nitrogen biofertilizer potential.

Science.gov (United States)

Chaurasia, Akhilesh Kumar; Apte, Shree Kumar

2011-01-01

Photosynthetic, nitrogen-fixing Anabaena strains are native to tropical paddy fields and contribute to the carbon and nitrogen economy of such soils. Genetic engineering was employed to improve the nitrogen biofertilizer potential of Anabaena sp. strain PCC7120. Constitutive enhanced expression of an additional integrated copy of the hetR gene from a light-inducible promoter elevated HetR protein expression and enhanced functional heterocyst frequency in the recombinant strain. The recombinant strain displayed consistently higher nitrogenase activity than the wild-type strain and appeared to be in homeostasis with compatible modulation of photosynthesis and respiration. The enhanced combined nitrogen availability from the recombinant strain positively catered to the nitrogen demand of rice seedlings in short-term hydroponic experiments and supported better growth. The engineered strain is stable, eco-friendly, and useful for environmental application as nitrogen biofertilizer in paddy fields.

Eco-audit as basis for an integral environment management

International Nuclear Information System (INIS)

Sepp, H.M.

1994-01-01

The author explains in a summary the possibility of utilizing the Eco-Audit as enterprise-oriented analysis of its strengths and weaknesses of the ecologically oriented factors, as well as its tendency to standardization by the European Union. Furthermore, he deals with the execution of an Eco-Audit in phases and its manifold utilization potentials for the investigated operation, which - when utilized consequently - can be seen in the realization of an integral ecologically oriented management. (orig.) [de

An eco friendly solution to the food waste disposal

Science.gov (United States)

Babu, G. Reddy; Kumar, G. Madhav

2017-07-01

In recent years, waste disposal at workmen camp is one of the major problems being faced by many nations across the world. In the workmen colony at Chittapur, a series of kitchens were built for cooking purpose and a number of small canteens are also functioning. Considerable quantity of food waste is collected daily from these eateries and disposed at a faraway place. Food waste is highly degradable in nature, if not disposed properly it causes problems related to environmental pollution. Hence, it is very important to identify an environment friendly process rather than opt for land filling or any disposal method. We worked together to find a suitable eco-friendly solution for the food waste disposal at Chittapur site and suggested that biogas production through anaerobic digestion is a solution for the disposal and utilization of food waste for better purpose. This resulted in setting up a 500 kg per day food waste treatment biogas plant at Chittapur. This establishment is the first time in the construction industry at workmen camp in India. Anaerobic Digestion has been recognized as one of the best options that is available for treating food waste, as it generates two valuable end products, biogas and compost. Biogas is a mixture of CH4 and CO2 about (55:45). Biogas generated can be used for thermal applications such as cooking or for generating electricity. The digested slurry is a well stabilized organic manure and can be used as soil fertilizer. Plant design is to handle 500 kg of food waste /day. 27 kg LPG is obtained from 500kg of kitchen waste. The Value of 27 kg of LPG is Rs.2700/day. Daily 1000 litres of digested effluent was obtained. It is good organic manure with plant micro nutrients and macro nutrients. This can be used for growing plants and in agriculture. The value of manure per day is Rs.250/-. The annual revenue is Rs.10.62 lakhs and the annual expenditure is 1.8 lakhs. The net benefit is 8.82 lakhs. Payback period is 2.1 years. This process

Computerized database management system for breast cancer patients.

Science.gov (United States)

Sim, Kok Swee; Chong, Sze Siang; Tso, Chih Ping; Nia, Mohsen Esmaeili; Chong, Aun Kee; Abbas, Siti Fathimah

2014-01-01

Data analysis based on breast cancer risk factors such as age, race, breastfeeding, hormone replacement therapy, family history, and obesity was conducted on breast cancer patients using a new enhanced computerized database management system. My Structural Query Language (MySQL) is selected as the application for database management system to store the patient data collected from hospitals in Malaysia. An automatic calculation tool is embedded in this system to assist the data analysis. The results are plotted automatically and a user-friendly graphical user interface is developed that can control the MySQL database. Case studies show breast cancer incidence rate is highest among Malay women, followed by Chinese and Indian. The peak age for breast cancer incidence is from 50 to 59 years old. Results suggest that the chance of developing breast cancer is increased in older women, and reduced with breastfeeding practice. The weight status might affect the breast cancer risk differently. Additional studies are needed to confirm these findings.

A novel eco-friendly technique for efficient control of lime water softening process.

Science.gov (United States)

Ostovar, Mohamad; Amiri, Mohamad

2013-12-01

Lime softening is an established type of water treatment used for water softening. The performance of this process is highly dependent on lime dosage. Currently, lime dosage is adjusted manually based on chemical tests, aimed at maintaining the phenolphthalein (P) and total (M) alkalinities within a certain range (2 P - M > or = 5). In this paper, a critical study of the softening process has been presented. It has been shown that the current method is frequently incorrect. Furthermore, electrical conductivity (EC) has been introduced as a novel indicator for effectively characterizing the lime softening process.This novel technique has several advantages over the current alkalinities method. Because no chemical reagents are needed for titration, which is a simple test, there is a considerable reduction in test costs. Additionally, there is a reduction in the treated water hardness and generated sludge during the lime softening process. Therefore, it is highly eco-friendly, and is a very cost effective alternative technique for efficient control of the lime softening process.

Preparation of Some Eco-friendly Corrosion Inhibitors Having Antibacterial Activity from Sea Food Waste.

Science.gov (United States)

Hussein, Mohamed H M; El-Hady, Mohamed F; Shehata, Hassan A H; Hegazy, Mohammad A; Hefni, Hassan H H

2013-03-01

Chitosan is one of the important biopolymers and it is extracted from exoskeletons of crustaceans in sea food waste. It is a suitable eco-friendly carbon steel corrosion inhibitor in acid media; the deacetylation degree of prepared chitosan is more than 85.16 %, and the molecular weight average is 109 kDa. Chitosan was modified to 2-N,N-diethylbenzene ammonium chloride N-oxoethyl chitosan (compound I), and 12-ammonium chloride N-oxododecan chitosan (compound II) as soluble water derivatives. The corrosion inhibition efficiency for carbon steel of compound (I) in 1 M HCl at varying temperature is higher than for chitosan and compound (II). However, the antibacterial activity of chitosan for Enterococcus faecalis, Escherichia coli, Staphylococcus aureus, and Candida albicans is higher than for its derivatives, and the minimum inhibition concentration and minimum bacterial concentration of chitosan and its derivatives were carried out with the same strain.

A sustainable and green process for scouring of cotton fabrics using xylano-pectinolytic synergism: switching from noxious chemicals to eco-friendly catalysts.

Science.gov (United States)

Singh, Avtar; Kaur, Amanjot; Patra, Arun Kumar; Mahajan, Ritu

2018-04-01

The objective of this research was to develop an appropriate, eco-friendly, cost-effective bioscouring methodology for removing natural impurities from cotton fabric. Maximum bioscouring was achieved using 5.0 IU xylanase and 4.0 IU pectinase with material to liquid ratio of 1:15 in a 50 mM buffer (glycine-NaOH buffer, 1.0 mM EDTA and 1% Tween-80, pH 8.5) with a treatment time of 60 min at 50 °C and an agitation speed of 60 rpm. The bioscoured cotton fabrics showed a gain of 1.17% in whiteness, 3.23% in brightness and a reduction of 4.18% in yellowness in comparison to fabric scoured with an alkaline scouring method. Further, after bleaching, the whiteness, brightness and tensile strength of the bioscoured fabrics were increased by 2.18, 2.33 and 11.74% along with a decrease of 4.61% in yellowness of bioscoured plus bleached fabrics in comparison to chemically scoured plus bleached fabrics. From the results, it is clear that bioscouring is more efficient, energy saving and an eco-friendly process and has the potential to replace the environment-damaging scouring process with the xylano-pectinolytic bioscouring process.

Indian jujuba seed powder as an eco-friendly and a low-cost biosorbent for removal of acid blue 25 from aqueous solution.

Science.gov (United States)

Krishna, L Sivarama; Reddy, A Sreenath; Zuhairi, W Y Wan; Taha, M R; Reddy, A Varada

2014-01-01

Indian jujuba seed powder (IJSP) has been investigated as a low-cost and an eco-friendly biosorbent, prepared for the removal of Acid Blue 25 (AB25) from aqueous solution. The prepared biomaterial was characterized by using FTIR and scanning electron microscopic studies. The effect of operation variables, such as IJSP dosage, contact time, concentration, pH, and temperature on the removal of AB25 was investigated, using batch biosorption technique. Removal efficiency increased with increase of IJSP dosage but decreased with increase of temperature. The equilibrium data were analyzed by the Langmuir and the Freundlich isotherm models. The data fitted well with the Langmuir model with a maximum biosorption capacity of 54.95 mg g(-1). The pseudo-second-order kinetics was the best for the biosorption of AB25 by IJSP, with good correlation. Thermodynamic parameters such as standard free energy change (ΔG(0)), standard enthalpy changes (ΔH(0)), and standard entropy changes (ΔS(0)) were analyzed. The removal of AB25 from aqueous solution by IJSP was a spontaneous and exothermic adsorption process. The results suggest that IJSP is a potential low-cost and an eco-friendly biosorbent for the AB25 removal from synthetic AB25 wastewater.

Eco-friendly LC-MS/MS method for analysis of multi-class micropollutants in tap, fountain, and well water from northern Portugal.

Science.gov (United States)

Barbosa, Marta O; Ribeiro, Ana R; Pereira, Manuel F R; Silva, Adrián M T

2016-11-01

Organic micropollutants present in drinking water (DW) may cause adverse effects for public health, and so reliable analytical methods are required to detect these pollutants at trace levels in DW. This work describes the first green analytical methodology for multi-class determination of 21 pollutants in DW: seven pesticides, an industrial compound, 12 pharmaceuticals, and a metabolite (some included in Directive 2013/39/EU or Decision 2015/495/EU). A solid-phase extraction procedure followed by ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (offline SPE-UHPLC-MS/MS) method was optimized using eco-friendly solvents, achieving detection limits below 0.20 ng L -1 . The validated analytical method was successfully applied to DW samples from different sources (tap, fountain, and well waters) from different locations in the north of Portugal, as well as before and after bench-scale UV and ozonation experiments in spiked tap water samples. Thirteen compounds were detected, many of them not regulated yet, in the following order of frequency: diclofenac > norfluoxetine > atrazine > simazine > warfarin > metoprolol > alachlor > chlorfenvinphos > trimethoprim > clarithromycin ≈ carbamazepine ≈ PFOS > citalopram. Hazard quotients were also estimated for the quantified substances and suggested no adverse effects to humans. Graphical Abstract Occurrence and removal of multi-class micropollutants in drinking water, analyzed by an eco-friendly LC-MS/MS method.

EcoCount

Directory of Open Access Journals (Sweden)

Phillip P. Allen

2014-05-01

Full Text Available Techniques that analyze biological remains from sediment sequences for environmental reconstructions are well established and widely used. Yet, identifying, counting, and recording biological evidence such as pollen grains remain a highly skilled, demanding, and time-consuming task. Standard procedure requires the classification and recording of between 300 and 500 pollen grains from each representative sample. Recording the data from a pollen count requires significant effort and focused resources from the palynologist. However, when an adaptation to the recording procedure is utilized, efficiency and time economy improve. We describe EcoCount, which represents a development in environmental data recording procedure. EcoCount is a voice activated fully customizable digital count sheet that allows the investigator to continuously interact with a field of view during the data recording. Continuous viewing allows the palynologist the opportunity to remain engaged with the essential task, identification, for longer, making pollen counting more efficient and economical. EcoCount is a versatile software package that can be used to record a variety of environmental evidence and can be installed onto different computer platforms, making the adoption by users and laboratories simple and inexpensive. The user-friendly format of EcoCount allows any novice to be competent and functional in a very short time.

Eco-Friendly Phyto-Synthesis of Silver Nanoparticles Using Jatropha Seedcake Extract

International Nuclear Information System (INIS)

Bose, Anjali; Keharia, Haresh; Deshpande, M. P.

2013-01-01

Phytosynthesis of metal nanoparticles is gaining importance due to their biocompatibility, low toxicity and eco-friendly nature. In the present study, an aqueous extract of Jatropha seedcake (JSC) is assessed as a reducing and stabilizing agent for the synthesis of silver nanoparticles (AgNPs). The maximum reduction of silver ions occur when 1 mM AgNO 3 solution is treated with 0.1 volume fraction of JSC extract in boiling water bath for 10 min. The synthesis of AgNPs is monitored by the excitation of surface plasmon resonance using UV-vis spectrophotometry. The AgNPs are found to be mono-dispersed, spherical with average particle size of 10.48 ± 74 nm when analyzed by transmission electron microscopy. The selected area electron diffraction (SAED) ring pattern indicated the polycrystalline nature of the AgNPs. The x-ray diffraction data further confirm the presence of characteristic (111), (200), (220), (311) and (222) diffraction planes of face centered cubic structure, and the calculated lattice parameter comes out to be 4.083 Å. FTIR analysis reveals the involvement of proteins and phenols in reduction and stabilization of nanoparticles. The synthesized AgNPs have significant antibacterial action on both the Gram positive and negative bacteria

Characterization of eco-friendly fluorescent nanoparticle-doped tracers for environmental sensing

International Nuclear Information System (INIS)

Tauro, Flavia; Rapiti, Emiliano; Al-Sharab, Jafar F.; Ubertini, Lucio; Grimaldi, Salvatore; Porfiri, Maurizio

2013-01-01

Particle tracers are extensively used in quantitative flow visualization and environmental sensing. In this paper, we provide a thorough characterization of the novel eco-friendly fluorescent particle tracers formulated in Tauro et al. (AIP Adv 3(3): 032108, 2013). The tracers are synthesized from natural beeswax and are functionalized by encapsulating nontoxic fluorophore nanoparticles in the beads’ matrix through an inexpensive thermal procedure. Visibility and durability studies are conducted through a wide array of techniques to investigate the tracers’ surface morphological microfeatures, crystal nature and size, chemical composition, fluorophore incorporation into the beeswax matrix, and fluorescence response under severe settings resembling exposure to natural environments. Our findings demonstrate that fluorescent nanoparticles ranging from 1.51 to 3.73 nm are homogeneously distributed in the superficial layer (12 nm) of the tracers. In addition, fluorescence emissions are observed up to 26 days of continuous exposure of the tracers to high energy radiation. To demonstrate the particles’ use in environmental flow sensing, a set of proof of concept outdoor tests are conducted, in which image analysis tools are utilized for detecting the fluorescent tracers. Experimental results suggest that fluorescent microparticles deployed in high flow-rate flows (2 m/s) and under direct sunlight can be sensed through commercially available cameras (frame rate set to 30 Hz)

Improved response time of flexible microelectromechanical sensors employing eco-friendly nanomaterials.

Science.gov (United States)

Fan, Shicheng; Dan, Li; Meng, Lingju; Zheng, Wei; Elias, Anastasia; Wang, Xihua

2017-11-09

Flexible force/pressure sensors are of interest for academia and industry and have applications in wearable technologies. Most of such sensors on the market or reported in journal publications are based on the operation mechanism of probing capacitance or resistance changes of the materials under pressure. Recently, we reported the microelectromechanical (MEM) sensors based on a different mechanism: mechanical switches. Multiples of such MEM sensors can be integrated to achieve the same function of regular force/pressure sensors while having the advantages of ease of fabrication and long-term stability in operation. Herein, we report the dramatically improved response time (more than one order of magnitude) of these MEM sensors by employing eco-friendly nanomaterials-cellulose nanocrystals. For instance, the incorporation of polydimethysiloxane filled with cellulose nanocrystals shortened the response time of MEM sensors from sub-seconds to several milliseconds, leading to the detection of both diastolic and systolic pressures in the radial arterial blood pressure measurement. Comprehensive mechanical and electrical characterization of the materials and the devices reveal that greatly enhanced storage modulus and loss modulus play key roles in this improved response time. The demonstrated fast-response flexible sensors enabled continuous monitoring of heart rate and complex cardiovascular signals using pressure sensors for future wearable sensing platforms.

The economic value of corporate eco-efficiency

NARCIS (Netherlands)

Guenster, N.; Bauer, R.; Derwall, J.M.M.; Koedijk, C.G.

2011-01-01

This study adds new insights to the long-running corporate environmental-financial performance debate by focusing on the concept of eco-efficiency. Using a new database of eco-efficiency scores, we analyse the relation between eco-efficiency and financial performance from 1997 to 2004. We report

Water-Soluble Polymers with Strong Photoluminescence through an Eco-Friendly and Low-Cost Route.

Science.gov (United States)

Guo, Zhaoyan; Ru, Yue; Song, Wenbo; Liu, Zhenjie; Zhang, Xiaohong; Qiao, Jinliang

2017-07-01

Photoluminescence (PL) of nonconjugated polymers brings a favorable opportunity for low-cost and nontoxic luminescent materials, while most of them still exhibit relatively weak emission. Strong PL from poly[(maleic anhydride)-alt-(vinyl acetate)] (PMV) from low-cost monomer has been found in organic solvents, yet the necessity of noxious solvents would hinder its practical applications. Herein, through a novel, eco-friendly, and one-step route, PMV-derived PL polymers can be fabricated with the highest quantum yield of 87% among water-soluble nonconjugated PL polymers ever reported. These PMV-derived polymers emit strong blue emission in both solutions and solids, and can be transformed into red-emission agents easily. These PL polymers exhibit application potentials in light-conversion agricultural films. It is assumed that this work not only puts forward a convenient preparation routine for nonconjugated polymers with high PL, but also provides an industrial application possibility for them. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

ECOS - analysis of sensitivity to database and input parameters

International Nuclear Information System (INIS)

Sumerling, T.J.; Jones, C.H.

1986-06-01

The sensitivity of doses calculated by the generic biosphere code ECOS to parameter changes has been investigated by the authors for the Department of the Environment as part of its radioactive waste management research programme. The sensitivity of results to radionuclide dependent parameters has been tested by specifying reasonable parameter ranges and performing code runs for best estimate, upper-bound and lower-bound parameter values. The work indicates that doses are most sensitive to scenario parameters: geosphere input fractions, area of contaminated land, land use and diet, flux of contaminated waters and water use. Recommendations are made based on the results of sensitivity. (author)

Facile and Eco-Friendly Synthesis of Finger-Like Co3O4 Nanorods for Electrochemical Energy Storage

Science.gov (United States)

Sun, Shijiao; Zhao, Xiangyu; Yang, Meng; Ma, Liqun; Shen, Xiaodong

2015-01-01

Co3O4 nanorods were prepared by a facile hydrothermal method. Eco-friendly deionized water rather than organic solvent was used as the hydrothermal media. The as-prepared Co3O4 nanorods are composed of many nanoparticles of 30–50 nm in diameter, forming a finger-like morphology. The Co3O4 electrode shows a specific capacitance of 265 F g−1 at 2 mV s−1 in a supercapacitor and delivers an initial specific discharge capacity as high as 1171 mAh g−1 at a current density of 50 mA g−1 in a lithium ion battery. Excellent cycling stability and electrochemical reversibility of the Co3O4 electrode were also obtained. PMID:28347124

Facile and Eco-Friendly Synthesis of Finger-Like Co3O4 Nanorods for Electrochemical Energy Storage

Directory of Open Access Journals (Sweden)

Shijiao Sun

2015-12-01

Full Text Available Co3O4 nanorods were prepared by a facile hydrothermal method. Eco-friendly deionized water rather than organic solvent was used as the hydrothermal media. The as-prepared Co3O4 nanorods are composed of many nanoparticles of 30–50 nm in diameter, forming a finger-like morphology. The Co3O4 electrode shows a specific capacitance of 265 F g−1 at 2 mV s−1 in a supercapacitor and delivers an initial specific discharge capacity as high as 1171 mAh g−1 at a current density of 50 mA g−1 in a lithium ion battery. Excellent cycling stability and electrochemical reversibility of the Co3O4 electrode were also obtained.

Eco-friendly one-pot synthesis of highly dispersible functionalized graphene nanosheets with free amino groups

International Nuclear Information System (INIS)

Liu Zhiting; Duan Xuezhi; Qian Gang; Zhou Xinggui; Yuan Weikang

2013-01-01

An eco-friendly, facile and scalable hydrothermal approach, in which the reduction and functionalization of graphite oxide (GO) are completed in one pot, is proposed for the synthesis of monolayer 3-aminopropyltriethoxysilane (APTES)-functionalized graphenes (A-FGs). Atomic force microscopy, transmission electron microscopy and x-ray diffraction analyses indicate that the as-synthesized A-FGs consist of only one or a few layered graphenes, while x-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis reveal that APTES is bonded to graphene by the dehydration reaction between the Si–OH (produced by APTES hydration) and the –OH on the GO surface. As a result, free amino groups are left on the A-FGs. Moreover, A-FGs are highly dispersible in dimethylsulfoxide, APTES and ethylene glycol, and their solubilities are up to 0.89, 4.03 and 0.90 mg ml −1 , respectively. (paper)

Lignin as a Binder Material for Eco-Friendly Li-Ion Batteries

Science.gov (United States)

Lu, Huiran; Cornell, Ann; Alvarado, Fernando; Behm, Mårten; Leijonmarck, Simon; Li, Jiebing; Tomani, Per; Lindbergh, Göran

2016-01-01

The industrial lignin used here is a byproduct from Kraft pulp mills, extracted from black liquor. Since lignin is inexpensive, abundant and renewable, its utilization has attracted more and more attention. In this work, lignin was used for the first time as binder material for LiFePO4 positive and graphite negative electrodes in Li-ion batteries. A procedure for pretreatment of lignin, where low-molecular fractions were removed by leaching, was necessary to obtain good battery performance. The lignin was analyzed for molecular mass distribution and thermal behavior prior to and after the pretreatment. Electrodes containing active material, conductive particles and lignin were cast on metal foils, acting as current collectors and characterized using scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and galvanostatic charge-discharge cycles. Good reversible capacities were obtained, 148 mAh·g−1 for the positive electrode and 305 mAh·g−1 for the negative electrode. Fairly good rate capabilities were found for both the positive electrode with 117 mAh·g−1 and the negative electrode with 160 mAh·g−1 at 1C. Low ohmic resistance also indicated good binder functionality. The results show that lignin is a promising candidate as binder material for electrodes in eco-friendly Li-ion batteries. PMID:28773252

Plasma nitriding - an eco friendly surface hardening process

International Nuclear Information System (INIS)

Mukherjee, S.

2015-01-01

Surface hardening is a process of heating the metal such that the surface gets only hardened. This process is adopted for many components like gears, cams, and crankshafts, which desire high hardness on the outer surface with a softer core to withstand the shocks. So, to attain such properties processes like carburising, nitriding, flame hardening and induction hardening are employed. Amongst these processes nitriding is the most commonly used process by many industries. In nitriding process the steel material is heated to a temperature of around 550 C and then exposed to atomic nitrogen. This atomic nitrogen reacts with iron and other alloying elements and forms nitrides, which are very hard in nature. By this process both wear resistance and hardness of the product can be increased. The atomic nitrogen required for this process can be obtained using ammonia gas (gas nitriding), cyanide based salt bath (liquid nitriding) and plasma medium (plasma nitriding). However, plasma nitriding has recently received considerable industrial interest owing to its characteristic of faster nitrogen penetration, short treatment time, low process temperature, minimal distortion, low energy use and easier control of layer formation compared with conventional techniques such as gas and liquid nitriding. This process can be used for all ferrous materials including stainless steels. Plasma nitriding is carried out using a gas mixture of nitrogen and hydrogen gas at sub atmospheric pressures hence, making it eco-friendly in nature. Plasma nitriding allows modification of the surface layers and hardness profiles by changing the gas mixture and temperature. The wide applicable temperature range enables a multitude of applications, beyond the possibilities of gas or salt bath processes. This has led to numerous applications of this process in industries such as the manufacture of machine parts for plastics and food processing, packaging and tooling as well as pumps and hydraulic, machine

Chemically-modified graphene sheets as an active layer for eco-friendly metal electroplating on plastic substrates

International Nuclear Information System (INIS)

Oh, Joon-Suk; Hwang, Taeseon; Nam, Gi-Yong; Hong, Jung-Pyo; Bae, Ah-Hyun; Son, Sang-Ik; Lee, Geun-Ho; Sung, Hak kyung; Choi, Hyouk Ryeol; Koo, Ja Choon; Nam, Jae-Do

2012-01-01

Eco-friendly nickel (Ni) electroplating was carried out on a plastic substrate using chemically modified graphene sheets as an active and conductive layer to initiate electroplating without using conventional pre-treatment or electroless metal-seeding processes. A graphene oxide (GO) solution was self-assembled on a polyethylene terephthalate (PET) film followed by evaporation to give GO layers (thickness around 6.5 μm) on PET (GO/PET) film. Then, the GO/PET film was chemically and thermally reduced to convert the GO layers to reduced graphene oxide (RGO) layers on the PET substrate. The RGO-coated PET (RGO/PET) film showed the sheet resistance of 100 Ω per square. On RGO/PET film, Ni electroplating was conducted under the constant-current condition and the entire surface of the PET film was completely metalized with Ni without any voids.

Comprehensive review on application of edible film on meat and meat products: An eco-friendly approach.

Science.gov (United States)

Umaraw, Pramila; Verma, Akhilesh K

2017-04-13

The functions of packaging materials are to prevent moisture loss, drip, reduce lipid oxidation, improve some of their sensorial properties (color, taste and smell) and provide microbial stability of foods. Edible films can be made from protein, polysaccharides and lipids or by combination of any of these to form a composite film. Nanocomposites are composite films made by incorporation of nanoparticles. Edible packaging and coating of the meat and meat products enhances the self-life by the incorporation of the active compound (such as antimicrobial and antioxidant compound) in to the packaging matrix. Incorporation of the some ingredients in the matrix may also improve the nutritional as well as sensory attributes of the packed products. Edible packaging material also reduces environmental pollution by overcoming the burden degradation as edible films are biodegradable and thus eco-friendly.

Study on the CO2 electric driven fixed swash plate type compressor for eco-friendly vehicles

Science.gov (United States)

Nam, Donglim; Kim, Kitae; Lee, Jehie; Kwon, Yunki; Lee, Geonho

2017-08-01

The purpose of this study is to experiment and to performance analysis about the electric-driven fixed swash plate compressor using alternate refrigerant(R744). Comprehensive simulation model for an electric driven compressor using CO2 for eco-friendly vehicle is presented. This model consists of compression model and dynamic model. The compression model included valve dynamics, leakage, and heat transfer models. And the dynamic model included frictional loss between piston ring and cylinder wall, frictional loss between shoe and swash plate, frictional loss of bearings, and electric efficiency. Especially, because the efficiency of an electric parts(motor and inverter) in the compressor affects the loss of the compressor, the dynamo test was performed. We made the designed compressor, and tested the performance of the compressor about the variety pressure conditions. Also we compared the performance analysis result and performance test result.

A User-Friendly, Keyword-Searchable Database of Geoscientific References Through 2007 for Afghanistan

Science.gov (United States)

Eppinger, Robert G.; Sipeki, Julianna; Scofield, M.L. Sco

2008-01-01

This report includes a document and accompanying Microsoft Access 2003 database of geoscientific references for the country of Afghanistan. The reference compilation is part of a larger joint study of Afghanistan?s energy, mineral, and water resources, and geologic hazards currently underway by the U.S. Geological Survey, the British Geological Survey, and the Afghanistan Geological Survey. The database includes both published (n = 2,489) and unpublished (n = 176) references compiled through calendar year 2007. The references comprise two separate tables in the Access database. The reference database includes a user-friendly, keyword-searchable interface and only minimum knowledge of the use of Microsoft Access is required.

DECO FRECASE (drywall eco-friendly from eggshell and cane bagasse) as an innovation of eco-friendly interior construction

Science.gov (United States)

Imron, M. A.; Ahkam, D. N. I.; Hidayat, A. W.

2017-12-01

The number of factories and home industries, both upper and lower middle class certainly adds waste generated, resulting in environmental pollution. The development of buildings is one of the largest contributors to global warming. For that, it takes technological innovations that lead to the criteria of green building. The application of green material is important aspects of environmentally friendly development, the selection of materials on the green material criteria of both roles should be applied continuously in order to realize the environmental sustainability of the material. Utilization Waste eggshell and bagasse which is a community waste, has the potential to become innovative environmentally friendly building materials. The eggshell is composed of 94% calcium carbonate, 1% magnesium carbonate, 1% calcium phosphate, and 4% organic material, especially protein, while the bagasse has a high content of silica (SiO2). In this study, the compounds are used as raw material for making alternative drywall in the form of DECO FRECASE. DECO FRECASE is an innovation of environmentally friendly building materials as an interior wall construction. Through DECO FRECASE, it is expected that building material innovation in Indonesia can be improved and of course environmental problems can be minimized by utilizing it as raw material for building construction.

Sunlight assisted photocatalytic degradation of Indigo Carmine using eco-friendly synthesized CdSnO3

Directory of Open Access Journals (Sweden)

Ashok V. Borhade

2016-03-01

Full Text Available In the present study I have developed an eco-friendly mechanochemical solid state method with green chemistry approach for the synthesis of CdSnO3. The photocatalyst was characterized to carry out physicochemical characterization by various analytical techniques like, Fourier Transform Infrared (FT-IR, Ultraviolet diffused reflectance Spectroscopy (UV-DRS, X-ray Diffraction (XRD, Scanning Electron Microscopy (SEM, Tunnelling Electron Microscopy (TEM and Brunauer–Emmett– Teller (BET surface area. The synthesized CdSnO3 particles had an average size of 105 nm with band gap 3.17 eV. The surface area by BET isotherm method highlight for the synthesized photocatalyst (SBET is 54.45 m2/g, with pore volume (Vp is 0.021 cc/g, and pore diameter (Dp is 24.85 Aº. Photocatalytic activity of CdSnO3 was demonstrated by degradation of Indigo carmine dye under influence of sunlight in aqueous solution

Setting a good example: supervisors as work-life-friendly role models within the context of boundary management.

Science.gov (United States)

Koch, Anna R; Binnewies, Carmen

2015-01-01

This multisource, multilevel study examined the importance of supervisors as work-life-friendly role models for employees' boundary management. Particularly, we tested whether supervisors' work-home segmentation behavior represents work-life-friendly role modeling for their employees. Furthermore, we tested whether work-life-friendly role modeling is positively related to employees' work-home segmentation behavior. Also, we examined whether work-life-friendly role modeling is positively related to employees' well-being in terms of feeling less exhausted and disengaged. In total, 237 employees and their 75 supervisors participated in our study. Results from hierarchical linear models revealed that supervisors who showed more segmentation behavior to separate work and home were more likely perceived as work-life-friendly role models. Employees with work-life-friendly role models were more likely to segment between work and home, and they felt less exhausted and disengaged. One may conclude that supervisors as work-life-friendly role models are highly important for employees' work-home segmentation behavior and gatekeepers to implement a work-life-friendly organizational culture. PsycINFO Database Record (c) 2014 APA, all rights reserved.

A user-friendly phytoremediation database: creating the searchable database, the users, and the broader implications.

Science.gov (United States)

Famulari, Stevie; Witz, Kyla

2015-01-01

Designers, students, teachers, gardeners, farmers, landscape architects, architects, engineers, homeowners, and others have uses for the practice of phytoremediation. This research looks at the creation of a phytoremediation database which is designed for ease of use for a non-scientific user, as well as for students in an educational setting ( http://www.steviefamulari.net/phytoremediation ). During 2012, Environmental Artist & Professor of Landscape Architecture Stevie Famulari, with assistance from Kyla Witz, a landscape architecture student, created an online searchable database designed for high public accessibility. The database is a record of research of plant species that aid in the uptake of contaminants, including metals, organic materials, biodiesels & oils, and radionuclides. The database consists of multiple interconnected indexes categorized into common and scientific plant name, contaminant name, and contaminant type. It includes photographs, hardiness zones, specific plant qualities, full citations to the original research, and other relevant information intended to aid those designing with phytoremediation search for potential plants which may be used to address their site's need. The objective of the terminology section is to remove uncertainty for more inexperienced users, and to clarify terms for a more user-friendly experience. Implications of the work, including education and ease of browsing, as well as use of the database in teaching, are discussed.

Physical and Electrical Properties of SiO2 Layer Synthesized by Eco-Friendly Method

Science.gov (United States)

Kim, Jong-Woong; Kim, Young-Seok; Hong, Sung-Jei; Hong, Tae-Hwan; Han, Jeong-In

2010-05-01

SiO2 thin film has a wide range of applications, including insulation layers in microelectronic devices, such as semiconductors and flat panel displays, due to its advantageous characteristics. Herein, we developed a new eco-friendly method for manufacturing SiO2 nanoparticles and, thereby, SiO2 paste to be used in the digital printing process for the fabrication of SiO2 film. By excluding harmful Cl- and NO3- elements from the SiO2 nanoparticle synthetic process, we were able to lower the heat treatment temperature for the SiO2 precursor from 600 to 300 °C and the diameter of the final SiO2 nanoparticles to about 14 nm. The synthesized SiO2 nanoparticles were dispersed in an organic solvent with additives to make a SiO2 paste for feasibility testing. The SiO2 paste was printed onto a glass substrate to test the feasibility of using it for digital printing. The insulation resistance of the printed film was high enough for it to be used as an insulation layer for passivation.

TiO_2 assisted photo-oxidation of wastewater prior to voltammetric determination of trace metals: Eco-friendly alternative to traditional digestion methods

International Nuclear Information System (INIS)

Lejbt, Beata; Ospina-Alvarez, Natalia; Miecznikowski, Krzysztof; Krasnodębska-Ostręga, Beata

2016-01-01

Highlights: • Cheap and eco-friendly method using anatase-assisted photodecomposition to pre-treat wastewater samples prior to trace metal analysis. • Addition of polyvinylidene fluoride did not affect the efficiency of organic matter decomposition. • TiO_2 assisted photo-oxidation procedure is equally effective than ICP MS determination after UV assisted digestion with H_2O_2 addition. - Abstract: Voltammetry is a sensitive method for metal determination and one alternative to ICP MS, but its limitation is the influence of the organic matrix on the measurements. To avoid those interferences, wet digestion with H_2O_2 accelerated with UV irradiation is applied and evaporation of excess of reagents is required. In this study, photolytic oxidation in quartz tubes with anatase was carried out, using as object of study wastewater samples with high amount of organic matter. Cadmium and lead determination was carried out in order to test metal recoveries. Lead recoveries reached c.a 85% for UV digestion with hydrogen peroxide, 98% for digestion with anatase immobilized with polyvinylidene fluoride (N-metylo-2-pirolidon) and c.a 103% for digestion with immobilized anatase (anatase in gum). The results obtained showed the usefulness of TiO_2 layer as an oxidation medium. An easy, cheap and eco-friendly digestion method of surfactants without any reagent has been developed, with equal sensitivity but and the same detection limit of traditional digestion methods.

Preliminary results of Resistive Plate Chambers operated with eco-friendly gas mixtures for application in the CMS experiment

CERN Document Server

Abbrescia, Marcello; Benussi, Luigi; Bianco, Stefano; Cauwenbergh, Simon Marc D; Ferrini, Mauro; Muhammad, Saleh; Passamontic, L; Pierluigi, Daniele; Piccolo, Davide; Primavera, Federica; Russo, Alessandro; Savianoc, G; Tytgat, Michael

2016-01-01

The operations of Resistive Plate Chambers in LHC experiments require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. In view of the CMS experiment upgrade several tests are ongoing to measure the performance of the detector in terms of efficiency, streamer probability, induced charge and time resolution. Prototype chambers with readout pads and with the standard cms electronic setup are under test. In this talk preliminary results on performance of RPCs operated with a potential eco-friendly gas candidate 1,3,3,3-Tetrafluoropropene, commercially known as HFO-1234ze and with CO2 based gas mixtures are presented and discussed for the possible application in the CMS experiment.

An Eco-Friendly Improved Protocol for the Synthesis of Bis(3-indolyl)methanes Using Poly(4-vinylpyridinium)hydrogen Sulfate as Efficient, Heterogeneous, and Recyclable Solid Acid Catalyst

Science.gov (United States)

Banothu, Janardhan; Gali, Rajitha; Velpula, Ravibabu; Bavantula, Rajitha; Crooks, Peter A.

2013-01-01

Highly efficient and eco-friendly protocol for the synthesis of bis(3-indolyl)methanes by the electrophilic substitution reaction of indole with aldehydes catalyzed by poly(4-vinylpyridinium)hydrogen sulfate was described. Excellent yields, shorter reaction times, simple work-up procedure, avoiding hazardous organic solvents, and reusability of the catalyst are the most obvious advantages of this method. PMID:24052864

Eco-friendly p-type Cu2SnS3 thermoelectric material: crystal structure and transport properties

Science.gov (United States)

Shen, Yawei; Li, Chao; Huang, Rong; Tian, Ruoming; Ye, Yang; Pan, Lin; Koumoto, Kunihito; Zhang, Ruizhi; Wan, Chunlei; Wang, Yifeng

2016-01-01

As a new eco-friendly thermoelectric material, copper tin sulfide (Cu2SnS3) ceramics were experimentally studied by Zn-doping. Excellent electrical transport properties were obtained by virtue of 3-dimensionally conductive network for holes, which are less affected by the coexistence of cubic and tetragonal phases that formed upon Zn subsitition for Sn; a highest power factors ~0.84 mW m−1 K−2 at 723 K was achieved in the 20% doped sample. Moreover, an ultralow lattice thermal conductivity close to theoretical minimum was observed in these samples, which could be related to the disordering of atoms in the coexisting cubic and tetragonal phases and the interfaces. Thanks to the phonon-glass-electron-crystal features, a maximum ZT ~ 0.58 was obtained at 723 K, which stands among the tops for sulfide thermoelectrics at the same temperature. PMID:27666524

A novel, eco-friendly technique for covalent functionalization of graphene nanoplatelets and the potential of their nanofluids for heat transfer applications

Science.gov (United States)

Sadri, Rad; Hosseini, Maryam; Kazi, S. N.; Bagheri, Samira; Zubir, Nashrul; Ahmadi, Goodarz; Dahari, Mahidzal; Zaharinie, Tuan

2017-05-01

In this study, a facile and eco-friendly covalent functionalization technique is developed to synthesize highly stable graphene nanoplatelets (GNPs) in aqueous media. This technique involves free radical grafting of gallic acid onto the surface of GNPs rather than corrosive inorganic acids. Raman spectroscopy, X-ray photoelectron spectroscopy and transmission electron microscopy are used to confirm the covalent functionalization of GNPs with gallic acid (GAGNPs). The solubility of the GAGNPs in aqueous media is verified using zeta potential and UV-vis spectra measurements. The nanofluid shows significant improvement in thermo-physical properties, indicating its superb potential for various thermal applications.

Constructing an Evaluation Framework for Eco-Museum Operations-Management Performance, Based on the Case of Jhushan, Taiwan

Directory of Open Access Journals (Sweden)

Kuo-Wei Hsu

2018-06-01

Full Text Available The bamboo-art industry in Taiwan’s Jhushan Township is inseparable from local life. In the face of local industrial-development difficulties in smaller towns, the Taiwan government aimed to achieve a range of (redevelopment goals using eco-museums as collaboration platforms and required such museums to combine their operations management with cultural preservation, local industrial development, and local residents’ goals. As such, the likely future performance of such operations management has emerged as a crucially important factor in decision-making about whether such museums should be constructed. This study, therefore, reviews the relevant literature on the operations-management performance of museums, with special attention to eco-museums, and proposes an operations-management performance measurement framework for eco-museums based on that review and a two-stage questionnaire administered to experts. The first stage utilized the Fuzzy Delphi Method, which focuses on impact factors, and the second, the Analytica Network Process Method, deals with performance factors. The results indicate that the key impacts on the performance of eco-museums and their operations management were, in order of importance, (1 community symbiosis, (2 cultural inheritance, and (3 regional revitalization. The preservation of cultural heritage, local identity, and community participation are the most important criteria in the operations management of eco-museums, and Jhushan Town can promote such museums through these guidelines.

Family-Friendly Management, Organizational Performance and Social Legitimacy

OpenAIRE

Woods, S. A.; de Menezes, L. M.

2010-01-01

Research on family-friendly practices has concentrated on the predictors of their use, particularly from the perspective of either institutional theory or the high involvement or commitment management vogue. This paper first shows how such perspectives can be used to generate hypotheses about the link between family-friendly management and organizational performance. Second, the paper reports research designed to test these, using data from a national representative sample of workplaces acros...

TiO{sub 2} assisted photo-oxidation of wastewater prior to voltammetric determination of trace metals: Eco-friendly alternative to traditional digestion methods

Energy Technology Data Exchange (ETDEWEB)

Lejbt, Beata; Ospina-Alvarez, Natalia; Miecznikowski, Krzysztof, E-mail: kmiecz@chem.uw.edu.pl; Krasnodębska-Ostręga, Beata, E-mail: bekras@chem.uw.edu.pl

2016-12-01

Highlights: • Cheap and eco-friendly method using anatase-assisted photodecomposition to pre-treat wastewater samples prior to trace metal analysis. • Addition of polyvinylidene fluoride did not affect the efficiency of organic matter decomposition. • TiO{sub 2} assisted photo-oxidation procedure is equally effective than ICP MS determination after UV assisted digestion with H{sub 2}O{sub 2} addition. - Abstract: Voltammetry is a sensitive method for metal determination and one alternative to ICP MS, but its limitation is the influence of the organic matrix on the measurements. To avoid those interferences, wet digestion with H{sub 2}O{sub 2} accelerated with UV irradiation is applied and evaporation of excess of reagents is required. In this study, photolytic oxidation in quartz tubes with anatase was carried out, using as object of study wastewater samples with high amount of organic matter. Cadmium and lead determination was carried out in order to test metal recoveries. Lead recoveries reached c.a 85% for UV digestion with hydrogen peroxide, 98% for digestion with anatase immobilized with polyvinylidene fluoride (N-metylo-2-pirolidon) and c.a 103% for digestion with immobilized anatase (anatase in gum). The results obtained showed the usefulness of TiO{sub 2} layer as an oxidation medium. An easy, cheap and eco-friendly digestion method of surfactants without any reagent has been developed, with equal sensitivity but and the same detection limit of traditional digestion methods.

Preliminary results of Resistive Plate Chambers operated with eco-friendly gas mixtures for application in the CMS experiment

International Nuclear Information System (INIS)

Abbrescia, M.; Muhammad, S.; Saviano, G.; Auwegem, P. Van; Cauwenbergh, S.; Tytgat, M.; Benussi, L.; Bianco, S.; Passamonti, L.; Pierluigi, D.; Piccolo, D.; Primavera, F.; Russo, A.; Ferrini, M.

2016-01-01

The operations of Resistive Plate Chambers in LHC experiments require Fluorine based (F-based) gases for optimal performance. Recent European regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. In view of the CMS experiment upgrade, several tests are ongoing to measure the performance of the detector with these new ecological gas mixtures, in terms of efficiency, streamer probability, induced charge and time resolution. Prototype chambers with readout pads and with the standard CMS electronic setup are under test. In this paper preliminary results on performance of RPCs operated with a potential eco-friendly gas candidate 1,3,3,3-Tetrafluoropropene, commercially known as HFO-1234ze, with CO 2 and CF 3 I based gas mixtures are presented and discussed for the possible application in the CMS experiment.

Preliminary results of Resistive Plate Chambers operated with eco-friendly gas mixtures for application in the CMS experiment

CERN Document Server

Abbrescia, M.

2016-01-01

The operations of Resistive Plate Chambers in LHC experiments require Fluorine based (F-based) gases for optimal performance. Recent European regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. In view of the CMS experiment upgrade, several tests are ongoing to measure the performance of the detector with these new ecological gas mixtures, in terms of efficiency, streamer probability, induced charge and time resolution. Prototype chambers with readout pads and with the standard CMS electronic setup are under test. In this paper preliminary results on performance of RPCs operated with a potential eco-friendly gas candidate 1,3,3,3-Tetrafluoropropene, commercially known as HFO-1234ze, with CO2 and CF3I based gas mixtures are presented and discussed for the possible application in the CMS experiment.

ECO DESIGN IN DESIGN PROCESS

Directory of Open Access Journals (Sweden)

PRALEA Jeni

2014-05-01

Full Text Available Eco-design is a new domain, required by the new trends and existing concerns worldwide, generated by the necessity of adopting new design principles. New design principles require the designer to provide a friendly relationship between concept created, environment and consume. This "friendly" relationship should be valid both at present and in the future, generating new opportunities for product, product components or materials from which it was made. Awareness, by the designer, the importance of this new trend, permits the establishment of concepts that have as their objective the protection of present values and ensuring the legacy of future generations. Ecodesig, by its principles, is involved in the design process, from early stage, the stage of product design. Priority objective of the designers will consist in reducing the negative effects on the environment through the entire life cycle and after it is taken out of use. The main aspects of the eco-design will consider extending product exploitation, make better use of materials, reduction of emission of waste. The design process in the "eco"domein must be started by selecting the function of the concept, materials and technological processes, causing the shape of macro and micro geometric of the product through an analysis that involves optimizing and streamlining the product. This paper presents the design process of a cross-sports footwear concept, built on the basis of the principles of ecodesign

The Effects of Substitution of The Natural Sand by Steel Slag in The Properties of Eco-Friendly Concrete with The 1:2:3 Ratio Mixing Method

Science.gov (United States)

Rahmawati, A.; Saputro, I. N.

2018-03-01

This study was motivated by the need for the development of eco-friendly concrete, and the use of large quantities of steel slag as an industrial waste which is generated from the steel manufacturers. This eco-friendly concrete was developed with steel slag as a substitute for natural sand. Properties of concrete which used waste slag as the fine aggregate with the 1 cement: 2 sand : 3 coarse aggregate ratio mixing method were examined. That ratio was in volume. Then a part of natural sand replaced with steel slag sand in six variations percentages that were 0 %, 20 %, 40 %, 60 %, 80 % and 100 %. The compressive strength, tensile strength, and flexural strength of concrete specimens were determined after curing for 28 days. The research results demonstrate that waste steel slag can increase the performance of concrete. The optimal percentage substitution natural sand by steel slag sand reached of slag on the percentage of 20 % which reached strength ratios of steel slag concrete to the strength of conventional concrete with natural sandstone were 1.37 for compressive strength and 1.13 for flexural strength. While the tensile strength reached a higher ratio of concrete with steel slag sand to the concrete with natural sand on the 80% substitution of natural sand with steel slag sand.

Good use of fruit wastes: eco-friendly synthesis of silver nanoparticles, characterization, BSA protein binding studies.

Science.gov (United States)

Sreekanth, T V M; Ravikumar, Sambandam; Lee, Yong Rok

2016-06-01

A simple and eco-friendly methodology for the green synthesis of silver nanoparticles (AgNPs) using a mango seed extract was evaluated. The AgNPs were characterized by ultraviolet-visible spectrophotometry, Fourier transform infrared spectroscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. The interaction between the green synthesized AgNPs and bovine serum albumin (BSA) in an aqueous solution at physiological pH was examined by fluorescence spectroscopy. The results confirmed that the AgNPs quenched the fluorophore of BSA by forming a ground state complex in aqueous solution. This fluorescence quenching data were also used to determine the binding sites and binding constants at different temperatures. The calculated thermodynamic parameters (ΔG°, ΔH° and ΔS°) suggest that the binding process occurs spontaneously through the involvement of electrostatic interactions. The synchronous fluorescence spectra showed a blue shift, indicating increasing hydrophobicity. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Eco-friendly synthesis of metal dichalcogenides nanosheets and their environmental remediation potential driven by visible light

Science.gov (United States)

Mishra, Ashish Kumar; Lakshmi, K. V.; Huang, Liping

2015-01-01

Exfoliated transition metal dichalcogenides (TMDs) such as WS2 and MoS2 have shown exciting potential for energy storage, catalysis and optoelectronics. So far, solution based methods for scalable production of few-layer TMDs usually involve the use of organic solvents or dangerous chemicals. Here, we report an eco-friendly method for facile synthesis of few-layer WS2 and MoS2 nanosheets using dilute aqueous solution of household detergent. Short time sonication of varying amount of bulk samples in soapy water was used to scale up the production of nanosheets. Thermal stability, optical absorption and Raman spectra of as-synthesized WS2 and MoS2 nanosheets are in close agreement with those from other synthesis techniques. Efficient photocatalytic activity of TMDs nanosheets was demonstrated by decomposing Brilliant Green dye in aqueous solution under visible light irradiation. Our study shows the great potential of TMDs nanosheets for environmental remediation by degrading toxic industrial chemicals in wastewater using sunlight. PMID:26503125

Eco-friendly and simple radiation-based preparation of graphene and its application to organic solar cells

International Nuclear Information System (INIS)

Jung, Chan-Hee; Park, Yong-Woon; Hwang, In-Tae; Choi, Jae-Hak; Go, Yeong-Jin; Na, Seok-In; Shin, Kwanwoo; Lee, Jae-Suk

2014-01-01

We report the reduction of graphene oxide (GO) through an eco-friendly and simple radiation-based method and the practical application of the resulting radiation-reduced GO (RRGO) as a solution-processable hole-transporting layer (HTL) for organic solar cells. GO dispersed in N, N′-dimethylformamide (DMF) was irradiated by γ-rays at various absorbed doses. The analytical results revealed that GO in DMF was effectively reduced to RRGO by γ-ray irradiation-induced deoxygenation, and that the reduction degree was dependent on the absorbed dose. The electrical conductivity of RRGO increased up to 12.7 S cm −1 with an increase in the absorbed dose, whereas the work function decreased to 4.34 eV. An organic solar cell device with RRGO prepared at 50 kGy as an HTL exhibited the best performance, with a power conversion efficiency of 2.72%, which is a better cell efficiency than is possible in devices with conventional GO and solvothermally-reduced GO. (paper)

Fabrication of Cu-Ag core-shell bimetallic superfine powders by eco-friendly reagents and structures characterization

Science.gov (United States)

Zhao, Jun; Zhang, Dongming; Zhao, Jie

2011-09-01

Superfine bimetallic Cu-Ag core-shell powders were synthesized by reduction of copper sulfate pentahydrate and silver nitrate with eco-friendly ascorbic acid as a reducing agent and cyclodextrins as a protective agent in an aqueous system. The influence of Ag/Cu ratio on coatings was investigated. Ag was homogeneously distributed on the surface of Cu particles at a mole ratio of Ag/Cu=1. FE-SEM showed an uniformity of Ag coatings on Cu particles. Antioxidation of Cu particles was improved by increasing Ag/Cu ratio. TEM-EDX and UV-vis spectra also revealed that Cu cores were covered by Ag nanoshells on the whole. The surface composition analysis by XPS indicated that only small parts of Cu atoms in the surface were oxidized. It was noted that the hindrance of cyclodextrins chemisorbed on particles plays an important role in forming high quality and good dispersity Cu-Ag (Cu@Ag) core-shell powders.

Eco-friendly synthesis of metal dichalcogenides nanosheets and their environmental remediation potential driven by visible light

Science.gov (United States)

Mishra, Ashish Kumar; Lakshmi, K. V.; Huang, Liping

2015-10-01

Exfoliated transition metal dichalcogenides (TMDs) such as WS2 and MoS2 have shown exciting potential for energy storage, catalysis and optoelectronics. So far, solution based methods for scalable production of few-layer TMDs usually involve the use of organic solvents or dangerous chemicals. Here, we report an eco-friendly method for facile synthesis of few-layer WS2 and MoS2 nanosheets using dilute aqueous solution of household detergent. Short time sonication of varying amount of bulk samples in soapy water was used to scale up the production of nanosheets. Thermal stability, optical absorption and Raman spectra of as-synthesized WS2 and MoS2 nanosheets are in close agreement with those from other synthesis techniques. Efficient photocatalytic activity of TMDs nanosheets was demonstrated by decomposing Brilliant Green dye in aqueous solution under visible light irradiation. Our study shows the great potential of TMDs nanosheets for environmental remediation by degrading toxic industrial chemicals in wastewater using sunlight.

A user friendly database for use in ALARA job dose assessment

Energy Technology Data Exchange (ETDEWEB)

Zodiates, A.M.; Willcock, A. [Cheshire, England (United Kingdom)

1995-03-01

The pressurized water reactor (PWR) design chosen for adoption by Nuclear Electric plc was based on the Westinghouse Standard Nuclear Unit Power Plant (SNUPPS). This design was developed to meet the United Kingdom requirements and these improvements are embodied in the Sizewell B plant which will start commercial operation in 1994. A user-friendly database was developed to assist the station in the dose and ALARP assessments of the work expected to be carried out during station operation and outage. The database stores the information in an easily accessible form and enables updating, editing, retrieval, and searches of the information. The database contains job-related information such as job locations, number of workers required, job times, and the expected plant doserates. It also contains the means to flag job requirements such as requirements for temporary shielding, flushing, scaffolding, etc. Typical uses of the database are envisaged to be in the prediction of occupational doses, the identification of high collective and individual dose jobs, use in ALARP assessments, setting of dose targets, monitoring of dose control performance, and others.

Characterization and biotoxicity of Hypnea musciformis-synthesized silver nanoparticles as potential eco-friendly control tool against Aedes aegypti and Plutella xylostella.

Science.gov (United States)

Roni, Mathath; Murugan, Kadarkarai; Panneerselvam, Chellasamy; Subramaniam, Jayapal; Nicoletti, Marcello; Madhiyazhagan, Pari; Dinesh, Devakumar; Suresh, Udaiyan; Khater, Hanem F; Wei, Hui; Canale, Angelo; Alarfaj, Abdullah A; Munusamy, Murugan A; Higuchi, Akon; Benelli, Giovanni

2015-11-01

Two of the most important challenges facing humanity in the 21st century comprise food production and disease control. Eco-friendly control tools against mosquito vectors and agricultural pests are urgently needed. Insecticidal products of marine origin have a huge potential to control these pests. In this research, we reported a single-step method to synthesize silver nanoparticles (AgNP) using the aqueous leaf extract of the seaweed Hypnea musciformis, a cheap, nontoxic and eco-friendly material, that worked as reducing and stabilizing agent during the biosynthesis. The formation of AgNP was confirmed by surface plasmon resonance band illustrated in UV-vis spectrophotometer. AgNP were characterized by FTIR, SEM, EDX and XRD analyses. AgNP were mostly spherical in shape, crystalline in nature, with face-centered cubic geometry, and their mean size was 40-65nm. Low doses of H. musciformis aqueous extract and seaweed-synthesized AgNP showed larvicidal and pupicidal toxicity against the dengue vector Aedes aegypti and the cabbage pest Plutella xylostella. The LC50 value of AgNP ranged from 18.14 to 38.23ppm for 1st instar larvae (L1) and pupae of A. aegypti, and from 24.5 to 38.23ppm for L1 and pupae of P. xylostella. Both H. musciformis extract and AgNP strongly reduced longevity and fecundity of A. aegypti and P. xylostella adults. This study adds knowledge on the toxicity of seaweed borne insecticides and green-synthesized AgNP against arthropods of medical and agricultural importance, allowing us to propose the tested products as effective candidates to develop newer and cheap pest control tools. Copyright © 2015 Elsevier Inc. All rights reserved.

Zein Nanoparticles as Eco-Friendly Carrier Systems for Botanical Repellents Aiming Sustainable Agriculture.

Science.gov (United States)

Oliveira, Jhones L de; Campos, Estefânia V R; Pereira, Anderson E S; Pasquoto, Tatiane; Lima, Renata; Grillo, Renato; Andrade, Daniel Junior de; Santos, Fabiano Aparecido Dos; Fraceto, Leonardo Fernandes

2018-02-14

Botanical repellents represent one of the main ways of reducing the use of synthetic pesticides and the contamination of soil and hydric resources. However, the poor stability and rapid degradation of these compounds in the environment hinder their effective application in the field. Zein nanoparticles can be used as eco-friendly carrier systems to protect these substances against premature degradation, provide desirable release characteristics, and reduce toxicity in the environment and to humans. In this study, we describe the preparation and characterization of zein nanoparticles loaded with the main constituents of the essential oil of citronella (geraniol and R-citronellal). The phytotoxicity, cytotoxicity, and insect activity of the nanoparticles toward target and nontarget organisms were also evaluated. The botanical formulations showed high encapsulation efficiency (>90%) in the nanoparticles, good physicochemical stability, and effective protection of the repellents against UV degradation. Cytotoxicity and phytotoxicity assays showed that encapsulation of the botanical repellents decreased their toxicity. Repellent activity tests showed that nanoparticles containing the botanical repellents were highly repellent against the Tetranychus urticae Koch mite. This nanotechnological formulation offers a new option for the effective use of botanical repellents in agriculture, reducing toxicity, protecting against premature degradation, and providing effective pest control.

Eco-friendly all-carbon paper electronics fabricated by a solvent-free drawing method

International Nuclear Information System (INIS)

Kanaparthi, Srinivasulu; Badhulika, Sushmee

2016-01-01

Here we report the fabrication of high-performance all-carbon temperature and infrared (IR) sensors with a solvent-free multiwalled carbon nanotube (MWCNT) trace as the sensing element and commercial graphite pencil trace as the electrical contact on recyclable and biodegradable cellulose filter paper without using any toxic materials or complex procedures. The temperature sensor shows a large negative temperature coefficient of resistance (TCR) in the range of −3100 ppm K −1 to −4900 ppm K −1 , which is comparable to available commercial temperature sensors, and an activation energy of 34.85 meV. The IR sensor shows a high responsivity of 58.5 V W −1 , which is greater than reported IR sensors with similar dimensions. A detailed study of the conduction mechanism in MWCNTs with temperature and the photo response with IR illumination was done and it was found that the conduction is due to thermally assisted hopping in band tails and the photo response is bolometric in nature. The successful fabrication of these sensors on cellulose filter paper with a comparable performance to existing components indicates that it is possible to fabricate high-performance electronics using low-cost, eco-friendly materials without the need for expensive clean-room processing techniques or harmful chemicals. (paper)

A novel and eco-friendly analytical method for phosphorus and sulfur determination in animal feed.

Science.gov (United States)

Novo, Diogo L R; Pereira, Rodrigo M; Costa, Vanize C; Hartwig, Carla A; Mesko, Marcia F

2018-04-25

An eco-friendly method for indirect determining phosphorus and sulfur in animal feed by ion chromatography was proposed. Using this method, it was possible to digest 500 mg of animal feed in a microwave system under oxygen pressure (20 bar) using only a diluted acid solution (2 mol L -1 HNO 3 ). The accuracy of the proposed method was evaluated by recovery tests, by analysis of reference material (RM) and by comparison of the results with those obtained using conventional microwave-assisted digestion. Moreover, P results were compared with those obtained from the method recommended by AOAC International for animal feed (Method nr. 965.17) and no significant differences were found between the results. Recoveries for P and S were between 94 and 97%, and agreements with the reference values of RM were better than 94%. Phosphorus and S concentrations in animal feeds ranged from 10,026 to 28,357 mg kg -1 and 2259 to 4601 mg kg -1 , respectively. Copyright © 2017 Elsevier Ltd. All rights reserved.

Properties of Eco-friendly Acrylic Resin/Clay Nanocomposites Prepared by Non-aqueous Dispersion (NAD) Polymerization

Energy Technology Data Exchange (ETDEWEB)

Kim, Yeongho; Lee, Minho; Jeon, Hyeon Yeol; Min, Byong Hun; Kim, Jeong Ho [Univ. of Suwon, Hwaseong (Korea, Republic of); Lee, Young Chul [Korea Institute of Industrial Technology, Seoul (Korea, Republic of)

2016-02-15

Eco-friendly acrylic resin/clay nanocomposites containing pristine montmorillonite (PM) or modified clays (30B and 25A) were prepared from acrylic and styrenic monomers using non-aqueous dispersion (NAD) polymerization. Effect of nanoclays on physical properties of polymerization product and resulting nanocomposites was investigated. In view of NAD particle stability, addition of nanoclay at the beginning of polymerization is proved to be good. Results of gel fraction, acid value and viscosity of the NAD product showed that nanocomposites containing clay 25A showed better physical properties than the ones with other clays. GPC results exhibit the increase in molecular weight and decrease in polydispersity index for the 25A nanocomposite. Increase in layer distance confirmed from XRD analysis showed good dispersion of 25A in the nanocomposite. Thermal and dynamic mechanical analysis showed that highest glass transition temperature and storage modulus for 25A nanocomposites. These results indicate that 25A nanoclay gives the best properties in the process of non-aqueous dispersion polymerization of acrylic resin/nanoclay nanocomposites.

arXiv R&D studies on eco-friendly gas mixtures for the ALICE Muon Identifier

CERN Document Server

INSPIRE-00584065

Resistive Plate Chambers (RPCs), used for the Muon Spectrometer of the ALICE experiment at CERN LHC, are currently operated in maxi-avalanche mode with a low threshold value and without amplification in the front-end electronics. RPC detectors have shown a good operation stability with the current gas mixture during the entire Run 1 (2010$-$2013) and the ongoing Run 2 (2015$-$2018) at the LHC. The gas mixture is made up of $C_{2}H_{2}F_{4}$, $SF_{6}$ and $iC_{4}H_{10}$. Since the first two gases have high Global Warming Potentials (GWPs), there is the risk that they will be phased out of production in the next years, due to the recent restrictions and regulations of the European Union. Therefore, finding a new eco-friendly gas mixture has become extremely important in order to reduce the emissions of greenhouse gases. In addition, the present $iC_{4}H_{10}$ contribution makes the current gas mixture flammable. Non-flammable components, or at least in non-flammable concentrations, would be advisable to make th...

Properties of Eco-friendly Acrylic Resin/Clay Nanocomposites Prepared by Non-aqueous Dispersion (NAD) Polymerization

International Nuclear Information System (INIS)

Kim, Yeongho; Lee, Minho; Jeon, Hyeon Yeol; Min, Byong Hun; Kim, Jeong Ho; Lee, Young Chul

2016-01-01

Eco-friendly acrylic resin/clay nanocomposites containing pristine montmorillonite (PM) or modified clays (30B and 25A) were prepared from acrylic and styrenic monomers using non-aqueous dispersion (NAD) polymerization. Effect of nanoclays on physical properties of polymerization product and resulting nanocomposites was investigated. In view of NAD particle stability, addition of nanoclay at the beginning of polymerization is proved to be good. Results of gel fraction, acid value and viscosity of the NAD product showed that nanocomposites containing clay 25A showed better physical properties than the ones with other clays. GPC results exhibit the increase in molecular weight and decrease in polydispersity index for the 25A nanocomposite. Increase in layer distance confirmed from XRD analysis showed good dispersion of 25A in the nanocomposite. Thermal and dynamic mechanical analysis showed that highest glass transition temperature and storage modulus for 25A nanocomposites. These results indicate that 25A nanoclay gives the best properties in the process of non-aqueous dispersion polymerization of acrylic resin/nanoclay nanocomposites

Selecting Eco-Friendly Thermal Systems for the “Vittoriale Degli Italiani” Historic Museum Building

Directory of Open Access Journals (Sweden)

Davide Astiaso Garcia

2015-09-01

Full Text Available Thermal systems installed in museums should guarantee the maintenance of the optimal hygrothermal parameters ranges for the conservation of their collection materials. Considering the preservation of historic buildings, according to their historical and landscaping constraints, not all the thermal system typologies could be installed in these buildings’ typologies. Therefore, the main aim of this paper is to present some indications for the choice of the best thermal system solutions for a considered historic museum building, called Vittoriale degli Italiani, in the north of Italy, taking into account their installation feasibility and their related environmental impacts. The methodology includes a monitoring of the current hygrothermal parameters as well as the assessment of design heat and cooling loads related to the maintenance of the optimal hygrothermal parameters ranges for the conservation of collection materials. In addition, a Life Cycle Assessment (LCA of each selected system typology is considered for highlighting the most eco-friendly solution among the suitable ones. The obtained results highlights the feasible thermal system solutions able to maintain the hygrothermal parameters between the optimal ranges with a lower environmental impact in the Vittoriale degli Italiani historic museum building.

Synthesis and urea-loading of an eco-friendly superabsorbent composite based on mulberry branches

Directory of Open Access Journals (Sweden)

Xiying Liang

2013-02-01

Full Text Available Mulberry branch, consisting of bark and stalk, was used as raw skeleton material without any chemical pre-treatment to synthesize an eco-friendly mulberry branch-g-poly(acrylic acid-co-acrylamide (PMB/P(AA-co-AM superabsorbent composite. The synthesis conditions and properties of the PMB/P(AA-co-AM superabsorbent composite were investigated. The results showed that under the optimal synthesis conditions, the water absorbency of the prepared PMB/P(AA-co-AM reached 570.5 g/g in deionized water, 288.0 g/g in tap water, and 70.0 g/g in 0.9 wt% aqueous NaCl solution. The PMB/P(AA-co-AM composite also exhibited excellent water retention capacity as well as a rapid water absorbency rate. The urea loading percentage of the PMB/P(AA-co-AM composite was controlled by the concentration of aqueous urea solution. The release of urea from the loaded PMB/P(AA-co-AM composite in deionized water initially exhibited a high rate of release for 60 min, followed by a rapid decline. Meanwhile, the PMB/P(AA-co-AM superabsorbent composite with larger particle size achieved a better sustained release of urea.

Eco-friendly and green synthesis of silver nanoparticles using leaf extract of Strychnos potatorum Linn.F. and their bactericidal activities.

Science.gov (United States)

Kagithoju, Srikanth; Godishala, Vikram; Nanna, Rama Swamy

2015-10-01

Inspired green synthesis of metallic nanoparticles is evolving as an important branch of nanotechnology. Traditionally these are manufactured by wet chemical methods which require toxic and flammable chemicals. We report for the first time an economic and eco-friendly green synthesis of silver nanoparticles using Strychnos potatorum aqueous leaf extract from 3 mM silver nitrate solution. Nanoparticles thus formed are confirmed and characterized by using UV-Vis absorption spectroscopy, SEM and XRD measurements. The XRD and SEM analysis showed the average particle size of nanoparticles as 28 nm as well as revealed their (mixed, i.e., cubic and hexagonal) structure. Further, these green synthesized nanoparticles showed bactericidal activity against multidrug-resistant human pathogenic bacteria.

Solvent-Mediated Eco-Friendly Synthesis and Characterization of Monodispersed Bimetallic Ag/Pd Nano composites for Sensing and Raman Scattering Applications

International Nuclear Information System (INIS)

Sathiyadevi, G.; Loganathan, B.; Karthikeyan, B.; Karthikeyan, B.

2014-01-01

The solvent-mediated eco-friendly monodispersed Ag/Pd bimetallic nano composites (BNCs) having thick core and thin shell have been prepared through novel green chemical solvent reduction method. Reducing solvent, dimethyl formamide (DMF) is employed for the controlled green synthesis. Characterization of the synthesized Ag/Pd BNCs has been done by x-ray diffraction (XRD) studies, high-resolution scanning electron microscopy (HR-SEM), energy-dispersive X-ray analysis (EDX), and high-resolution transmission electron microscopy (HR-TEM) with selected area electron diffraction (SAED) pattern. The nature of the interaction of L-cysteine with Ag/Pd BNCs has been studied by using surface plasmon spectroscopy, Fourier transform-infrared spectroscopy (FT-IR), cyclic voltammetry (CV), and theoretical methods.

Curcuma longa extract - Haldi: A safe, eco-friendly natural cytoplasmic stain.

Science.gov (United States)

Suryawanshi, Hema; Naik, Rupali; Kumar, Pramod; Gupta, Rolly

2017-01-01

Eosin is most widely used synthetic dye belonging to the xanthene group. These dyes are efficient but are hazardous to human and animal health. With the increasing awareness of a green earth, it is advisable to use more of eco-friendly and biodegradable material which can be effectively achieved by the use of natural dyes obtained from plants and other natural sources. Turmeric, available as Curcuma longa (domestic), has long been in use in the subcontinent as a spice and flavoring agent in most food preparations. Its health benefit as a natural antibiotic and anti-inflammatory has been successfully established by several researchers. The intense yellow color imparted by turmeric inspired us to explore its efficacy as a potential alternative for eosin in routine histopathological procedures. The aim of this was to explore the efficacy of turmeric extract as a stand-alone counterstain for hematoxylin and its comparative assessment with routine H and E staining. The rhizomes of C. longa were cut into small pieces, dried and milled. This powder was dissolved into alcohol and centrifuged using a centrifugal machine. The supernatant was then collected with the help of micropipette. This supernatant was used as a counterstain for hematoxylin. The data were analyzed using Mann-Whitney U test with Statistical Package for the Social Sciences version 15.0 (SPSS Inc.,). The P value obtained was statistically insignificant ( P > 0.05). Although eosin is the most efficient counterstain for hematoxylin, turmeric can also be used as an alternative for eosin.

Database management systems understanding and applying database technology

CERN Document Server

Gorman, Michael M

1991-01-01

Database Management Systems: Understanding and Applying Database Technology focuses on the processes, methodologies, techniques, and approaches involved in database management systems (DBMSs).The book first takes a look at ANSI database standards and DBMS applications and components. Discussion focus on application components and DBMS components, implementing the dynamic relationship application, problems and benefits of dynamic relationship DBMSs, nature of a dynamic relationship application, ANSI/NDL, and DBMS standards. The manuscript then ponders on logical database, interrogation, and phy

A human friendly reporting and database system for brain PET analysis

International Nuclear Information System (INIS)

Jamzad, M.; Ishii, Kenji; Toyama, Hinako; Senda, Michio

1996-01-01

We have developed a human friendly reporting and database system for clinical brain PET (Positron Emission Tomography) scans, which enables statistical data analysis on qualitative information obtained from image interpretation. Our system consists of a Brain PET Data (Input) Tool and Report Writing Tool. In the Brain PET Data Tool, findings and interpretations are input by selecting menu icons in a window panel instead of writing a free text. This method of input enables on-line data entry into and update of the database by means of pre-defined consistent words, which facilitates statistical data analysis. The Report Writing Tool generates a one page report of natural English sentences semi-automatically by using the above input information and the patient information obtained from our PET center's main database. It also has a keyword selection function from the report text so that we can save a set of keywords on the database for further analysis. By means of this system, we can store the data related to patient information and visual interpretation of the PET examination while writing clinical reports in daily work. The database files in our system can be accessed by means of commercially available databases. We have used the 4th Dimension database that runs on a Macintosh computer and analyzed 95 cases of 18 F-FDG brain PET studies. The results showed high specificity of parietal hypometabolism for Alzheimer's patients. (author)

Eco-Innovation in Circular Agri-Business

Directory of Open Access Journals (Sweden)

Dong-Her Shih

2018-04-01

Full Text Available This study constructs a theory of eco-innovation in circular agri-business. Although previous studies have discussed eco-innovation in circular agri-business, they did not address eco-innovation from the perspective of a closed-loop sustainable supply chain. Hence, this study applied the fuzzy TOPSIS method to conduct the analysis and determine the interrelationship between eco-innovation and the closed-loop concept. The results are consistent with the theory and a significant improvement in terms of the decisive attributes. The findings suggest that improving water management, relationships with suppliers, knowledge sharing, environmental management systems, and new product and service development are the most effective and efficient ways to build eco-innovation in circular agri-business. The managerial and theoretical implications are discussed.

Ecosystem-management-based Management Models of Fast-growing and High-yield Plantation and Its Eco-economic Benefits Analysis

Institute of Scientific and Technical Information of China (English)

无

2010-01-01

The paper expounded the basic concept and principles of ecosystem management,and analyzed the state and trend of industrial plantation ecosystem management in other countries.Based on the analysis of typical case studies,the eco-economic benefits were evaluated for the management models of fast-growing and high-yield plantations.

Development of subsurface drainage database system for use in environmental management issues

International Nuclear Information System (INIS)

Azhar, A.H.; Rafiq, M.; Alam, M.M.

2007-01-01

A simple user-friendly menue-driven system for database management pertinent to the Impact of Subsurface Drainage Systems on Land and Water Conditions (ISIAW) has been developed for use in environment-management issues of the drainage areas. This database has been developed by integrating four soft wares, viz; Microsoft Excel, MS Word Acrobat and MS Access. The information, in the form of tables and figures, with respect to various drainage projects has been presented in MS Word files. The major data-sets of various subsurface drainage projects included in the ISLaW database are: i) technical aspects, ii) groundwater and soil-salinity aspects, iii) socio-technical aspects, iv) agro-economic aspects, and v) operation and maintenance aspects. The various ISlAW file can be accessed just by clicking at the Menu buttons of the database system. This database not only gives feed back on the functioning of different subsurface drainage projects, with respect to the above-mentioned aspects, but also serves as a resource-document for these data for future studies on other drainage projects. The developed database-system is useful for planners, designers and Farmers Organisations for improved operation of existing drainage projects as well as development of future ones. (author)

Eco-friendly synthesis of silver nanoparticles and its larvicidal property against fourth instar larvae of Aedes aegypti.

Science.gov (United States)

Ali, Zainal Abidin; Roslan, Muhammad Aidil; Yahya, Rosiyah; Wan Sulaiman, Wan Yusoff; Puteh, Rustam

2017-03-01

In this study, larvicidal activity of silver nanoparticles (AgNPs) synthesised using apple extract against fourth instar larvae of Aedes aegypti was determined. As a result, the AgNPs showed moderate larvicidal effects against Ae. aegypti larvae (LC 50  = 15.76 ppm and LC 90  = 27.7 ppm). In addition, comparison of larvicidal activity performance of AgNPs at high concentration prepared using two different methods showed that Ae. aegypti larvae was fully eliminated within the duration of 2.5 h. From X-ray diffraction, the AgNP crystallites were found to exhibit face centred cubic structure. The average size of these AgNPs as estimated by particle size distribution was in the range of 50-120 nm. The absorption maxima of the synthesised Ag showed characteristic Ag surface plasmon resonance peak. This green synthesis provides an economic, eco-friendly and clean synthesis route to Ag.

A simple cost-effective and eco-friendly wet chemical process for the fabrication of superhydrophobic cotton fabrics

International Nuclear Information System (INIS)

Richard, Edna; Lakshmi, R.V.; Aruna, S.T.; Basu, Bharathibai J.

2013-01-01

Superhydrophobic surfaces were created on hydrophilic cotton fabrics by a simple wet chemical process. The fabric was immersed in a colloidal suspension of zinc hydroxide followed by subsequent hydrophobization with stearic acid. The wettability of the modified cotton fabric sample was studied by water contact angle (WCA) and water shedding angle (WSA) measurements. The modified cotton fabrics exhibited superhydrophobicity with a WCA of 151° for 8 μL water droplet and a WSA of 5–10° for 40 μL water droplet. The superhydrophobic cotton sample was also characterized by field emission scanning electron microscopy (FESEM) and energy dispersive X-ray spectroscopy (EDX). The method is simple, eco-friendly and cost-effective and can be applied to large area of cotton fabric materials. It was shown that superhydrophobicity of the fabric was due to the combined effect of surface roughness imparted by zinc hydroxide and the low surface energy of stearic acid.

A simple cost-effective and eco-friendly wet chemical process for the fabrication of superhydrophobic cotton fabrics

Energy Technology Data Exchange (ETDEWEB)

Richard, Edna; Lakshmi, R.V.; Aruna, S.T., E-mail: aruna_reddy@nal.res.in; Basu, Bharathibai J.

2013-07-15

Superhydrophobic surfaces were created on hydrophilic cotton fabrics by a simple wet chemical process. The fabric was immersed in a colloidal suspension of zinc hydroxide followed by subsequent hydrophobization with stearic acid. The wettability of the modified cotton fabric sample was studied by water contact angle (WCA) and water shedding angle (WSA) measurements. The modified cotton fabrics exhibited superhydrophobicity with a WCA of 151° for 8 μL water droplet and a WSA of 5–10° for 40 μL water droplet. The superhydrophobic cotton sample was also characterized by field emission scanning electron microscopy (FESEM) and energy dispersive X-ray spectroscopy (EDX). The method is simple, eco-friendly and cost-effective and can be applied to large area of cotton fabric materials. It was shown that superhydrophobicity of the fabric was due to the combined effect of surface roughness imparted by zinc hydroxide and the low surface energy of stearic acid.

Potential of Taraxacum mongolicum Hand-Mazz for accelerating phytoextraction of cadmium in combination with eco-friendly amendments

International Nuclear Information System (INIS)

Wei Shuhe; Wang Shanshan; Zhou Qixing; Zhan Jie; Ma Lihui; Wu Zhijie; Sun Tieheng; Prasad, M.N.V.

2010-01-01

Phytoextraction and phytostabilization are well-established sub-processes of phytoremediation that are being followed for in situ remediation of soils contaminated with toxic metals. Taraxacum mongolicum Hand-Mazz, a newly reported Cd accumulator has shown considerable potential for phytoextracting Cd. This paper investigated the effects of urea and chicken manure on T. mongolicum phytoextracting Cd from soil using pot culture experiments. The results showed that urea application did not affect the Cd concentrations in root, leaf, inflorescence and shoot of T. mongolicum, but chicken manure significantly decreased them (p -1 ) of T. mongolicum to Cd by 3-5-fold due to the increase in shoot biomass (increased 4-7 folds). Further, addition of urea and chicken manure increased organic matter, nitrogen, phosphorus and potassium, the microorganism count, urease and phosphatase activities of soil indicating their eco-friendly function. Urea is ideal for optimizing phytoextraction of T. mongolicum to Cd, while chicken manure is appropriate for phytostabilization.

A PEG/copper(i) halide cluster as an eco-friendly catalytic system for C-N bond formation.

Science.gov (United States)

Li, Cheng-An; Ji, Wei; Qu, Jian; Jing, Su; Gao, Fei; Zhu, Dun-Ru

2018-05-22

The catalytic activities of eight copper(i) halide clusters assembled from copper(i) halide and ferrocenyltelluroethers, 1-8, were investigated in C-N formation under various conditions. A catalytic procedure using poly(ethylene glycol) (PEG-400) as a greener alternative organic solvent has been developed. The PEG-400/5 system can achieve 99% targeted yield with a mild reaction temperature and short reaction time. After the isolation of the products by extraction with diethyl ether, this PEG-400/cluster system could be easily recycled. Spectroscopic studies elucidate a stepwise mechanism: firstly, proton-coupled electron transfer (PCET) involving the transfer of an electron from Cu+ and a proton from imidazole results in the formation of a labile penta-coordinated Cu2+ and aryl radical; the following effective electron transfer from the ferrocene unit reduces Cu2+ and forms the target product; finally, the ferrocenium unit is reduced by the I- anion. The merits of this eco-friendly synthesis are the efficient utilization of reagents and easy recyclability.

Bio-based fillers for environmentally friendly composites

CSIR Research Space (South Africa)

Mokhothu, Thabang H

2017-03-01

Full Text Available The use of bio-based fillers as alternative replacement for synthetic fillers has been dictated by increasing ecological concerns as well as depleting petroleum resources. The other aspect is a growing need for eco-friendly, renewable...

Flocculation characteristics of polyacrylamide grafted cellulose from Phyllostachys heterocycla: An efficient and eco-friendly flocculant.

Science.gov (United States)

Liu, Hongyi; Yang, Xiaogang; Zhang, Yong; Zhu, Hangcheng; Yao, Juming

2014-08-01

This work presents a synthesis process and flocculation characteristics of an eco-friendly flocculant based on bamboo pulp cellulose (BPC) from Phyllostachys heterocycla. Ployacrylamide (PAM) was grafted onto the BPC by free-radical graft copolymerization in homogeneous aqueous solution. The optimal synthesis conditions of the bamboo pulp cellulose-graft-ployacrylamide flocculant (BPC-g-PAM) and its performance on wastewater treatments were investigated. A UV-based method was used to rapidly determine the degree of substitution (DS) of BPC. The results showed that, under the optimal synthesis conditions, the obtained BPC-g-PAM held a grafting ratio of 43.8% and DS of 1.31. Turbidity removal of the product reached 98.0% accompanying with the significant flocculation and sedimentation in target suspensions. The flocculation mechanism was explored by means of zeta potential method. For negatively charged contaminants, like kaolin clay particles, the BPC-g-PAM could remove the contaminants efficiently via bridging and charge neutralization in acidic or neutral environment. Copyright © 2014 Elsevier Ltd. All rights reserved.

New Coumarin Derivative as an Eco-Friendly Inhibitor of Corrosion of Mild Steel in Acid Medium

Directory of Open Access Journals (Sweden)

Ahmed A. Al-Amiery

2014-12-01

Full Text Available The anticorrosion ability of a synthesized coumarin, namely 2-(coumarin-4-yloxyacetohydrazide (EFCI, for mild steel (MS in 1 M hydrochloric acid solution has been studied using a weight loss method. The effect of temperature on the corrosion rate was investigated, and some thermodynamic parameters were calculated. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. The IE value reaches 94.7% at the highest used concentration of the new eco-friendly inhibitor. The adsorption of inhibitor on MS surface was found to obey a Langmuir adsorption isotherm. Scanning electron microscopy (SEM was performed on inhibited and uninhibited mild steel samples to characterize the surface. The Density Function theory (DFT was employed for quantum-chemical calculations such as EHOMO (highest occupied molecular orbital energy, ELUMO (lowest unoccupied molecular orbital energy and μ (dipole moment, and the obtained results were found to be consistent with the experimental findings. The synthesized inhibitor was characterized by Fourier transform infrared (FTIR and nuclear magnetic resonance (NMR spectroscopic studies.

Curcuma longa extract – Haldi: A safe, eco-friendly natural cytoplasmic stain

Science.gov (United States)

Suryawanshi, Hema; Naik, Rupali; Kumar, Pramod; Gupta, Rolly

2017-01-01

Background: Eosin is most widely used synthetic dye belonging to the xanthene group. These dyes are efficient but are hazardous to human and animal health. With the increasing awareness of a green earth, it is advisable to use more of eco-friendly and biodegradable material which can be effectively achieved by the use of natural dyes obtained from plants and other natural sources. Turmeric, available as Curcuma longa (domestic), has long been in use in the subcontinent as a spice and flavoring agent in most food preparations. Its health benefit as a natural antibiotic and anti-inflammatory has been successfully established by several researchers. The intense yellow color imparted by turmeric inspired us to explore its efficacy as a potential alternative for eosin in routine histopathological procedures. Aim: The aim of this was to explore the efficacy of turmeric extract as a stand-alone counterstain for hematoxylin and its comparative assessment with routine H and E staining. Materials and Methods: The rhizomes of C. longa were cut into small pieces, dried and milled. This powder was dissolved into alcohol and centrifuged using a centrifugal machine. The supernatant was then collected with the help of micropipette. This supernatant was used as a counterstain for hematoxylin. Results: The data were analyzed using Mann–Whitney U test with Statistical Package for the Social Sciences version 15.0 (SPSS Inc.,). The P value obtained was statistically insignificant (P > 0.05). Conclusion: Although eosin is the most efficient counterstain for hematoxylin, turmeric can also be used as an alternative for eosin. PMID:29391705

Single-step biosynthesis and characterization of silver nanoparticles using Zornia diphylla leaves: A potent eco-friendly tool against malaria and arbovirus vectors.

Science.gov (United States)

Govindarajan, Marimuthu; Rajeswary, Mohan; Muthukumaran, Udaiyan; Hoti, S L; Khater, Hanem F; Benelli, Giovanni

2016-08-01

Mosquitoes (Diptera: Culicidae) are vectors of important pathogens and parasites, including malaria, dengue, chikungunya, Japanese encephalitis, lymphatic filariasis and Zika virus. The application of synthetic insecticides causes development of resistance, biological magnification of toxic substances through the food chain, and adverse effects on the environment and human health. In this scenario, eco-friendly control tools of mosquito vectors are a priority. Here single-step fabrication of silver nanoparticles (AgNP) using a cheap aqueous leaf extract of Zornia diphylla as reducing and capping agent pf Ag(+) ions has been carried out. Biosynthesized AgNP were characterized by UV-visible spectrophotometry, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDX) and X-ray diffraction analysis (XRD). The acute toxicity of Z. diphylla leaf extract and biosynthesized AgNP was evaluated against larvae of the malaria vector Anopheles subpictus, the dengue vector Aedes albopictus and the Japanese encephalitis vector Culex tritaeniorhynchus. Both the Z. diphylla leaf extract and Ag NP showed dose dependent larvicidal effect against all tested mosquito species. Compared to the leaf aqueous extract, biosynthesized Ag NP showed higher toxicity against An. subpictus, Ae. albopictus, and Cx. tritaeniorhynchus with LC50 values of 12.53, 13.42 and 14.61μg/ml, respectively. Biosynthesized Ag NP were found safer to non-target organisms Chironomus circumdatus, Anisops bouvieri and Gambusia affinis, with the respective LC50 values ranging from 613.11 to 6903.93μg/ml, if compared to target mosquitoes. Overall, our results highlight that Z. diphylla-fabricated Ag NP are a promising and eco-friendly tool against larval populations of mosquito vectors of medical and veterinary importance, with negligible toxicity against other non-target organisms. Copyright © 2016 Elsevier B

EcoPAD, an interactive platform for near real-time ecological forecasting by assimilating data into model

Science.gov (United States)

MA, S.; Huang, Y.; Stacy, M.; Jiang, J.; Sundi, N.; Ricciuto, D. M.; Hanson, P. J.; Luo, Y.; Saruta, V.

2017-12-01

Ecological forecasting is critical in various aspects of our coupled human-nature systems, such as disaster risk reduction, natural resource management and climate change mitigation. Novel advancements are in urgent need to deepen our understandings of ecosystem dynamics, boost the predictive capacity of ecology, and provide timely and effective information for decision-makers in a rapidly changing world. Our study presents a smart system - Ecological Platform for Assimilation of Data (EcoPAD) - which streamlines web request-response, data management, model execution, result storage and visualization. EcoPAD allows users to (i) estimate model parameters or state variables, (ii) quantify uncertainty of estimated parameters and projected states of ecosystems, (iii) evaluate model structures, (iv) assess sampling strategies, (v) conduct ecological forecasting, and (vi) detect ecosystem acclimation to climate change. One of the key innovations of the web-based EcoPAD is the automated near- or real-time forecasting of ecosystem dynamics with uncertainty fully quantified. The user friendly webpage enables non-modelers to explore their data for simulation and data assimilation. As a case study, we applied EcoPAD to the Spruce and Peatland Responses Under Climatic and Environmental Change Experiment (SPRUCE), a whole ecosystem warming and CO2 enrichment treatment project in the northern peatland, assimilated multiple data streams into a process based ecosystem model, enhanced timely feedback between modelers and experimenters, ultimately improved ecosystem forecasting and made better use of current knowledge. Built in a framework with flexible API, EcoPAD is easily portable and will benefit scientific communities, policy makers as well as the general public.

Eco-Friendly Nets and Floating Row Covers Reduce Pest Infestation and Improve Tomato (Solanum lycopersicum L. Yields for Smallholder Farmers in Kenya

Directory of Open Access Journals (Sweden)

Elisha O. Gogo

2014-01-01

Full Text Available Tomato (Solanum lycopersicum L. is an important vegetable for supplying vitamins, minerals and fiber in human diets worldwide. Successful open field production of tomato in the tropics is limited by insect pests among other constraints. Two trials were conducted at the Horticulture Research and Teaching Field, Egerton University, Kenya with the objective of evaluating the effects of agricultural nets (agronets herein called eco-friendly nets (EFNs and floating row covers (FRCs on pest population and yield of tomatoes. A randomized complete block design with five replications was used. Tomato plants were protected with either fine mesh EFN (0.4-mm pore diameter, large mesh EFN (0.9-mm pore diameter or FRC. The EFN and FRC were maintained permanently closed or opened thrice a week from 9 am to 3 pm. Two control treatments were used: open unsprayed (untreated control or open and sprayed with alpha-cypermethrin based insecticide (treated control. The use of EFN and FRC helped to manage pests with the lowest pest population obtained under FRC maintained permanently covered and the highest population recorded in the untreated control. Covering tomato plants with EFN or FRC also resulted in more marketable fruit and lower yield losses compared with the unprotected systems. The EFN and FRC offer great potential as part of integrated systems for pest management and yield improvement in tomato production in regions with a tropical climate.

Low-cost and eco-friendly synthesis of silver nanoparticles using coconut (Cocos nucifera) oil cake extract and its antibacterial activity.

Science.gov (United States)

Govarthanan, Muthusamy; Seo, Young-Seok; Lee, Kui-Jae; Jung, Ik-Boo; Ju, Ho-Jong; Kim, Jae Su; Cho, Min; Kamala-Kannan, Seralathan; Oh, Byung-Taek

2016-12-01

The present study reports the simple, inexpensive, eco-friendly synthesis of silver nanoparticles (AgNPs) using coconut oil cake extract. Scanning electron microscopy-energy dispersive spectroscopy peak at 3 keV confirmed the presence of silver. Transmission electron micrograph showed that nanoparticles are mostly circular with an average size of 10-70 nm. The results of the X-ray powder diffraction analysis (2θ = 46.2, 67.4 and 76.8) indicated the crystal nature of the AgNPs. Fourier transform infrared spectroscopy analysis indicates that proteins present in the oilcake extract could be responsible for the reduction of silver ions. The synthesized AgNPs (1-4 mm) reduced the growth rate of multi-antibiotic-resistant bacteria such as Aeromonas sp., Acinetobacter sp. and Citrobacter sp. isolated from livestock wastewater.

Environmentally friendly polymer nanocomposites: types, processing and properties

CSIR Research Space (South Africa)

Sinha Ray, S

2013-07-01

Full Text Available In recent years, the development of eco-friendly polymeric materials with balanced properties has become a subject of research attention due to concerns with increasing global-warming, carbon-emission, and limited natural resources. Nano...

Evaluation of eco-friendly zwitterionic detergents for enveloped virus inactivation.

Science.gov (United States)

Conley, Lynn; Tao, Yinying; Henry, Alexis; Koepf, Edward; Cecchini, Douglas; Pieracci, John; Ghose, Sanchayita

2017-04-01

Inclusion of a detergent in protein biotherapeutic purification processes is a simple and very robust method for inactivating enveloped viruses. The detergent Triton X-100 has been used for many years and is part of the production process of several commercial therapeutic proteins. However, recent ecological studies have suggested that Triton X-100 and its break-down products can potentially behave as endocrine disrupters in aquatic organisms, raising concerns from an environmental impact perspective. As such, discharge of Triton X-100 into the waste water treatment plants is regulated in some jurisdictions, and alternative detergents for viral inactivation are required. In this work, we report on the identification and evaluation of more eco-friendly detergents as viable replacements for Triton X-100. Five detergent candidates with low to moderate environmental impact were initially identified and evaluated with respect to protein stability, followed by proof-of-concept virus inactivation studies using a model enveloped virus. From the set of candidates lauryldimethylamine N-oxide (LDAO) was identified as the most promising detergent due to its low ecotoxicity, robust anti-viral activity (LRV >4 at validation set-point conditions with X-MuLX), and absence of any negative impact on protein function. This detergent exhibited effective and robust virus inactivation in a broad range of protein concentrations, solution conductivities, pHs, and in several different cell culture fluid matrices. The only process parameter which correlated with reduced virus inactivation potency was LDAO concentration, and then only when the concentration was reduced to below the detergent's critical micelle concentration (CMC). Additionally, this work also demonstrated that LDAO was cleared to below detectable levels after Protein A affinity chromatography, making it suitable for use in a platform process that utilizes this chromatographic mode for protein capture. All these findings

CANGS DB: a stand-alone web-based database tool for processing, managing and analyzing 454 data in biodiversity studies

Directory of Open Access Journals (Sweden)

Schlötterer Christian

2011-06-01

Full Text Available Abstract Background Next generation sequencing (NGS is widely used in metagenomic and transcriptomic analyses in biodiversity. The ease of data generation provided by NGS platforms has allowed researchers to perform these analyses on their particular study systems. In particular the 454 platform has become the preferred choice for PCR amplicon based biodiversity surveys because it generates the longest sequence reads. Nevertheless, the handling and organization of massive amounts of sequencing data poses a major problem for the research community, particularly when multiple researchers are involved in data acquisition and analysis. An integrated and user-friendly tool, which performs quality control, read trimming, PCR primer removal, and data organization is desperately needed, therefore, to make data interpretation fast and manageable. Findings We developed CANGS DB (Cleaning and Analyzing Next Generation Sequences DataBase a flexible, stand alone and user-friendly integrated database tool. CANGS DB is specifically designed to organize and manage the massive amount of sequencing data arising from various NGS projects. CANGS DB also provides an intuitive user interface for sequence trimming and quality control, taxonomy analysis and rarefaction analysis. Our database tool can be easily adapted to handle multiple sequencing projects in parallel with different sample information, amplicon sizes, primer sequences, and quality thresholds, which makes this software especially useful for non-bioinformaticians. Furthermore, CANGS DB is especially suited for projects where multiple users need to access the data. CANGS DB is available at http://code.google.com/p/cangsdb/. Conclusion CANGS DB provides a simple and user-friendly solution to process, store and analyze 454 sequencing data. Being a local database that is accessible through a user-friendly interface, CANGS DB provides the perfect tool for collaborative amplicon based biodiversity surveys

Microwave assisted facile synthesis of {1/1,3-bis/1,3,5-tris-[(2-nitroxyethylnitramino)-2,4,6-trinitrobenzene]} using bismuth nitrate pentahydrate as an eco-friendly nitrating agent

International Nuclear Information System (INIS)

Badgujar, D.M.; Talawar, M.B.; Asthana, S.N.; Venugopalan, S.; Rao, A. Subhananda; Mahulikar, P.P.

2008-01-01

1-(2-Nitroxyethylnitramino)-2,4,6-trinitrobenzene (3a), 1,3-bis(2-nitroxyethyl nitramino)-2,4,6-trinitrobenzene (3b) and 1,3,5-tris(2-nitroxyethylnitramino)-2,4,6-trinitrobenzene (3c) were prepared by the nitration of 1-(2-hydroxyethylamino)-2,4,6-trinitrobenzene (2a) 1,3-bis(2-hydroxyethylamino)-2,4,6-trinitrobenzene (2b) and 1,3,5-tris(2-hydroxyethylamino)-2,4,6-trinitrobenzene (2c) using bismuth nitrate pentahydrate (eco-friendly nitrating agent) in tetrahydrofuran adsorbed on silica gel under microwave irradiation, respectively. Key intermediate compounds viz., 2a, 2b and 2c were synthesized by condensing picryl chloride, styphnyl chloride and 1,3,5-trichloro-2,4,6-trinitrobenzene with ethanol amine, respectively, based on the lines of the reported method. The synthesized compounds were characterized based on their physical constant, infrared (IR) spectroscopy and 1 H nuclear magnetic resonance (NMR) spectroscopy. The spectroscopic data obtained indicated the formation of nitrate esters (3a-3c). The nitration methodology adopted in the present study is of relevance in the context of green chemistry. The target compounds (3a-3c) synthesized using eco-friendly approach are of interest from the point of high energy materials (HEMs)

Assessment of Eco-friendly Gases for Electrical Insulation to Replace the Most Potent Industrial Greenhouse Gas SF6.

Science.gov (United States)

Rabie, Mohamed; Franck, Christian M

2018-01-16

Gases for electrical insulation are essential for the operation of electric power equipment. This Review gives a brief history of gaseous insulation that involved the emergence of the most potent industrial greenhouse gas known today, namely sulfur hexafluoride. SF 6 paved the way to space-saving equipment for the transmission and distribution of electrical energy. Its ever-rising usage in the electrical grid also played a decisive role in the continuous increase of atmospheric SF 6 abundance over the last decades. This Review broadly covers the environmental concerns related to SF 6 emissions and assesses the latest generation of eco-friendly replacement gases. They offer great potential for reducing greenhouse gas emissions from electrical equipment but at the same time involve technical trade-offs. The rumors of one or the other being superior seem premature, in particular because of the lack of dielectric, environmental, and chemical information for these relatively novel compounds and their dissociation products during operation.

Degradation of Phytate Pentamagnesium Salt by Bacillus sp. T4 Phytase as a Potential Eco-friendly Feed Additive

Science.gov (United States)

Park, Inkyung; Lee, Jaekoo; Cho, Jaiesoon

2012-01-01

A bacterial isolate derived from soil samples near a cattle farm was found to display extracellular phytase activity. Based on 16S rRNA sequence analysis, the strain was named Bacillus sp. T4. The optimum temperature for the phytase activity toward magnesium phytate (Mg-InsP6) was 40°C without 5 mM Ca2+ and 50°C with 5 mM Ca2+. T4 phytase had a characteristic bi-hump two pH optima of 6.0 to 6.5 and 7.4 for Mg-InsP6. The enzyme showed higher specificity for Mg-InsP6 than sodium phytate (Na-InsP6). Its activity was fairly inhibited by EDTA, Cu2+, Mn2+, Co2+, Ba2+ and Zn2+. T4 phytase may have great potential for use as an eco-friendly feed additive to enhance the nutritive quality of phytate and reduce phosphorus pollution. PMID:25049504

Database development and management

CERN Document Server

Chao, Lee

2006-01-01

Introduction to Database Systems Functions of a DatabaseDatabase Management SystemDatabase ComponentsDatabase Development ProcessConceptual Design and Data Modeling Introduction to Database Design Process Understanding Business ProcessEntity-Relationship Data Model Representing Business Process with Entity-RelationshipModelTable Structure and NormalizationIntroduction to TablesTable NormalizationTransforming Data Models to Relational Databases .DBMS Selection Transforming Data Models to Relational DatabasesEnforcing ConstraintsCreating Database for Business ProcessPhysical Design and Database

An Efficient, Eco-friendly and Sustainable One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones Directly from Alcohols Catalyzed by Heteropolyanion-Based Ionic Liquids.

Science.gov (United States)

Fu, Renzhong; Yang, Yang; Ma, Xudong; Sun, Yu; Li, Jin; Gao, Hang; Hu, Huaxing; Zeng, Xiaojun; Yi, Jun

2017-09-11

Efficient, eco-friendly and sustainable access to 3,4-dihydropyrimidin-2(1 H )-ones directly from alcohols under microwave and solvent-free conditions has been reported. The practical protocol involves heteropolyanion-based catalyzed oxidation of alcohols to aldehydes with NaNO₃ as the oxidant followed by cyclocondensation with dicarbonyl compounds and urea or thiourea in a two-step, one-pot manner. Compatibility with different functional groups, good to excellent yields and reusable catalysts are the main highlights. The utilization of alcohols instead of aldehydes is a valid and green alternative to the classical Biginelli reaction.

Column-oriented database management systems

OpenAIRE

Možina, David

2013-01-01

In the following thesis I will present column-oriented database. Among other things, I will answer on a question why there is a need for a column-oriented database. In recent years there have been a lot of attention regarding a column-oriented database, even if the existence of a columnar database management systems dates back in the early seventies of the last century. I will compare both systems for a database management – a colum-oriented database system and a row-oriented database system ...

Eco-efficiency in industrial production

NARCIS (Netherlands)

von Raesfeld Meijer, Ariane M.; de Bakker, F.G.A.; Groen, Arend J.

2001-01-01

English AbstractThis report of the MATRIC project investigated 'Eco-efficiency in industrial production'. After a general introduction into the domain of eco-efficiency, the first part of this report further focusses on the organisation of Product-Oriented Environmental Management (POEM), which is

Data-based Speed-limit-respecting Eco-driving System

Czech Academy of Sciences Publication Activity Database

Suzdaleva, Evgenia; Nagy, Ivan

2014-01-01

Roč. 44, č. 1 (2014), s. 253-264 ISSN 0968-090X R&D Projects: GA TA ČR TA01030123 Institutional support: RVO:67985556 Keywords : eco-driving * fuel consumption * recommended speed * recursive estimation * quadratic optimal control * dynamic programming Subject RIV: BC - Control Systems Theory Impact factor: 2.818, year: 2014 http://library.utia.cas.cz/separaty/2014/AS/suzdaleva-0427942.pdf

Sunlight-driven eco-friendly smart curtain based on infrared responsive graphene oxide-polymer photoactuators.

Science.gov (United States)

Leeladhar; Raturi, Parul; Singh, J P

2018-02-27

Photomechanical actuation is the conversion of light energy into mechanical energy through some smart materials. Infrared-responsive smart materials have become an emerging field of research due to easy availability and eco-friendly nature of their stimulus in the form of sunlight, which contains about 50% of near-infrared(nIR) making these materials useful at macro-scale photoactuator applications. Here, we demonstrate fabrication of highly versatile nIR triggered photoactuators based on graphene oxide/polycarbonate bilayers that offers fast, low-cost fabrication, large deflection, reversible actuation and wavelength-selective response. The photoactuators are realized by vacuum filtration of graphene oxide/water dispersion through polycarbonate membrane resulting graphene oxide/polymer bilayer structure. The photoactuation response was measured in the form of deflection from equilibrium position as a result of infrared-irradiation. The deflection is caused by the generated thermal stress at the interface of bilayers due to mismatch of thermal expansion coefficient as a results of nIR absorption by graphene oxide and subsequent temperature rise. A maximum deflection of 12 mm (circular-shaped structure with diameter 28 mm) with corresponding bending curvature of 0.33 cm -1 was shown by this photoactuator for illumination intensity of 106 mW/cm 2 . Few applications of these photoactuators such as sunlight-driven smart curtain, infrared actuated curtain and self-folding box are also demonstrated.

Production of oil palm (Elaeis guineensis) fronds lignin-derived non-toxic aldehyde for eco-friendly wood adhesive.

Science.gov (United States)

Hazwan Hussin, M; Samad, Noraini Abdul; Latif, Nur Hanis Abd; Rozuli, Nurul Adilla; Yusoff, Siti Baidurah; Gambier, François; Brosse, Nicolas

2018-07-01

Lignocellulosic materials can significantly contribute to the development of eco-friendly wood adhesives. In this work, glyoxal-phenolic resins for plywood were prepared using organosolv lignin, which was isolated from black liquor recovered from organosolv pulping of oil palm fronds (OPF) and considered to be an alternative to phenol. Glyoxal, which is a dialdehyde obtained from several natural resources, was used as substitute for formaldehyde. The structure of organosolv lignin and the resins were characterized by FTIR and NMR, and for thermal stability by TGA and DSC. The resins were further studied for their viscosity, pH, solids content and gel times. The resins performance as wood adhesive was further established from mechanical test in terms of tensile strength and modulus of elasticity (MOE) to obtain the optimum ratios of organosolv lignin, which replaces phenol in organosolv lignin phenol glyoxal (OLPG) resins. The adhesive composition having 50% (w/w) of phenol substituted by organosolv lignin, termed as 50% OLPG showed highest adhesive strength compared to phenol formaldehyde (PF) commercial adhesive. Copyright © 2018 Elsevier B.V. All rights reserved.

Eco-Schools campaign. The European projects

International Nuclear Information System (INIS)

Blanchini, P.; Marino, G.

1999-01-01

The Foundation for Environmental Education in Europe (FEEE) was established in 1981; since then it was been actively promoting and delivering education through a series of successful internationals programmes launched in 21 different European nations. The Eco-School Campaign aims to raise students' awareness of environment issues through classroom study, and provide an integrated system for environmental management of schools based on EMAS (with waste, water and energy management as priority areas). As a process of facilitating sustainable developpement at a local level, pupils are encouraged to take an active role in mental impact of the schools. The Eco-Schools Green Flag, awarded to schools with high achievement in their Programme, is a recognised and respected eco-label for environmental education and performance. In Italy the National Eco-Schools operator was asked to set up a ten-schools pilot programme in the region Friuli Venezia Giulia: these are very first national schools that are likely to become 'Eco-Schools'

Thermal replacement reaction: a novel route for synthesizing eco-friendly ZnO@γ-In2Se3 hetero-nanostructures by replacing cadmium with indium and their photoelectrochemical and photocatalytic performances.

Science.gov (United States)

Zhang, Zhuo; Choi, Mingi; Baek, Minki; Yong, Kijung

2015-05-21

A novel route called thermal replacement reaction was demonstrated for synthesizing eco-friendly ZnO@γ-In2Se3 hetero-structural nanowires on FTO glass by replacing the element cadmium with indium for the first time. The indium layer was coated on the surface of the ZnO nanowires beforehand, then CdSe quantum dots were deposited onto the coated indium layer, and finally the CdSe quantum dots were converted to γ-In2Se3 quantum dots by annealing under vacuum at 350 °C for one hour. The prepared ZnO@γ-In2Se3 hetero-nanostructures exhibit stable photoelectrochemical properties that can be ascribed to the protection of the In2O3 layer between the ZnO nanowire and γ-In2Se3 quantum dots and better photocatalytic performance in the wide wavelength region from 400 nm to nearly 750 nm. This strategy for preparing the ZnO@γ-In2Se3 hetero-nanostructures not only enriches our understanding of the single replacement reaction where the active element cadmium can be replaced with indium, but also opens a new way for the in situ conversion of cadmium-based to eco-friendly indium-based nano-devices.

Who Manages Space? Eco-DRR and the Local Community

Directory of Open Access Journals (Sweden)

Syarifah Aini Dalimunthe

2018-05-01

Full Text Available The notion of ecosystem-based disaster risk reduction (DRR has only recently emerged in Indonesia. The Indonesian central government now adopts some policies related to ecosystem-based DRR with formal commitments from local administrations. At the implementation level, various activities have taken place, such as mangrove planting and restoration along the coastline to address the rising sea level and the “one billion trees” program to address the urgent issue of deforestation. These governmental activities have involved local communities that reside in the high-risk area, while nonlocal actors, particularly from the private and the nongovernmental sectors, have contributed as a third element to development. This paper examines space management in the context of Eco-DRR, paying special attention to uncertainty and anxiety in the local communities as the government and private sectors engage in development activities that have significant impacts on their present and future lives. The present study pursues this purpose by means of in-depth interview and focus group discussions (FGD with local leaders in mangrove planting and restoration programs. The study took place in a small island community in a part of the Jakarta Megapolitan Region, Indonesia. The results point out that the community feels left behind due to lack of trust in managing the conservation space. Another issue to be addressed is how to improve the democratization of environment management and livelihood base of the local community. Therefore, building confidence and ameliorating relationships between actors within/without the local community should lead to a better Eco-DRR initiative.

Simple eco-friendly synthesis of the surfactant free SnS nanocrystal toward the photoelectrochemical cell application.

Science.gov (United States)

Huang, Xiaoguang; Woo, Heechul; Wu, Peinian; Hong, Hyo Jin; Jung, Wan Gil; Kim, Bong-Joong; Vanel, Jean-Charles; Choi, Jin Woo

2017-11-28

A simple, low cost, non-toxic and eco-friendly pathway for synthesizing efficient sunlight-driven tin sulfide photocatalyst was studied. SnS nanocrystals were prepared by using mechanical method. The bulk SnS was obtained by evaporation of SnS nanocrystal solution. The synthesized samples were characterized by using XRD, SEM, TEM, UV-vis, and Raman analyses. Well crystallized SnS nanocrystals were verified and the electrochemical characterization was also performed under visible light irradiation. The SnS nanocrystals have shown remarkable photocurrent density of 7.6 mA cm -2 under 100 mW cm -2 which is about 10 times larger than that of the bulk SnS under notably stable operation conditions. Furthermore, the SnS nanocrystals presented higher stability than the bulk form. The IPCE(Incident photon to current conversion efficiency) of 9.3% at 420 nm was obtained for SnS nanocrystal photoanode which is strikingly higher than that of bulk SnS, 0.78%. This work suggests that the enhancement of reacting area by using SnS nanocrystal absorbers could give rise to the improvement of photoelectrochemical cell efficiency.

PBPK Modeling - A Predictive, Eco-Friendly, Bio-Waiver Tool for Drug Research.

Science.gov (United States)

De, Baishakhi; Bhandari, Koushik; Mukherjee, Ranjan; Katakam, Prakash; Adiki, Shanta K; Gundamaraju, Rohit; Mitra, Analava

2017-01-01

The world has witnessed growing complexities in disease scenario influenced by the drastic changes in host-pathogen- environment triadic relation. Pharmaceutical R&Ds are in constant search of novel therapeutic entities to hasten transition of drug molecules from lab bench to patient bedside. Extensive animal studies and human pharmacokinetics are still the "gold standard" in investigational new drug research and bio-equivalency studies. Apart from cost, time and ethical issues on animal experimentation, burning questions arise relating to ecological disturbances, environmental hazards and biodiversity issues. Grave concerns arises when the adverse outcomes of continued studies on one particular disease on environment gives rise to several other pathogenic agents finally complicating the total scenario. Thus Pharma R&Ds face a challenge to develop bio-waiver protocols. Lead optimization, drug candidate selection with favorable pharmacokinetics and pharmacodynamics, toxicity assessment are vital steps in drug development. Simulation tools like Gastro Plus™, PK Sim®, SimCyp find applications for the purpose. Advanced technologies like organ-on-a chip or human-on-a chip where a 3D representation of human organs and systems can mimic the related processes and activities, thereby linking them to major features of human biology can be successfully incorporated in the drug development tool box. PBPK provides the State of Art to serve as an optional of animal experimentation. PBPK models can successfully bypass bio-equivalency studies, predict bioavailability, drug interactions and on hyphenation with in vitro-in vivo correlation can be extrapolated to humans thus serving as bio-waiver. PBPK can serve as an eco-friendly bio-waiver predictive tool in drug development. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Effect of sulfurization temperature on the property of Cu2ZnSnS4 thin film by eco-friendly nanoparticle ink method

Science.gov (United States)

Wang, Wei; Shen, Honglie; Yao, Hanyu; Shang, Huirong; Tang, ZhengXia; Li, Yufang

2017-09-01

Cu2ZnSnS4 (CZTS) thin films were fabricated by a low-cost nanoparticle ink method. The eco-friendly hydrophilic CZTS nanoparticles were mixed with low-cost n-propanol to form nanoparticle ink. To improve crystallinity and remove oxygen element, the CZTS thin films were sulfurized further. The effects of sulfurization temperature on the structure, morphologies, and photovoltaic performances of CZTS thin films were investigated. The results showed that the crystallinity of CZTS thin film was improved with increasing sulfurization temperature. The surface morphology studies demonstrated the formation of compact and homogenous CZTS thin film at a sulfurization temperature of 600 °C. By optimizing thickness of CZTS thin film, the CZTS thin-film solar cell with an optimal efficiency of 2.1% was obtained.

Business sustainability performance measurement: Eco-ratio analysis

Directory of Open Access Journals (Sweden)

Collins C. Ngwakwe

2016-12-01

Full Text Available Eco-aware customers and stakeholders are demanding for a measurement that links environmental performance with other business operations. To bridge this seemingly measurement gap, this paper suggests ‘Eco-Ratio Analysis’ and proposes an approach for conducting eco-ratio analysis. It is argued that since accounting ratios function as a tool for evaluating corporate financial viability by management and investors, eco-ratio analysis should be brought to the fore to provide a succinct measurement about the linkage between environmental performance and conventional business performance. It is hoped that this suggestion will usher in a nuance debate and approach in the teaching, research and practice of environmental management and sustainability accounting

Proposal for the Evaluation of Eco-Efficient Concrete

Directory of Open Access Journals (Sweden)

Taehyoung Kim

2016-07-01

Full Text Available The importance of environmental consequences due to diverse substances that are emitted during the production of concrete is recognized, but environmental performance tends to be evaluated separately from the economic performance and durability performance of concrete. In order to evaluate concrete from the perspective of sustainable development, evaluation technologies are required for comprehensive assessment of environmental performance, economic performance, and durability performance based on a concept of sustainable development called the triple bottom line (TBL. Herein, an assessment method for concrete eco-efficiency is developed as a technique to ensure the manufacture of highly durable and eco-friendly concrete, while minimizing both the load on the ecological environment and manufacturing costs. The assessment method is based on environmental impact, manufacturing costs, and the service life of concrete. According to our findings, eco-efficiency increased as the compressive strength of concrete increased from 21 MPa to 40 MPa. The eco-efficiency of 40 MPa concrete was about 50% higher than the eco-efficiency of 24 MPa concrete. Thus eco-efficiency is found to increase with an increasing compressive strength of concrete because the rate of increase in the service life of concrete is larger than the rate of increase in the costs. In addition, eco-efficiency (KRW/year was shown to increase for all concrete strengths as mixing rates of admixtures (Ground Granulated Blast furnace Slag increased to 30% during concrete mix design. However, when the mixing rate of admixtures increased to 40% and 60%, the eco-efficiency dropped due to rapid reduction in the service life values of concrete to 74 (year/m3 and 44 (year/m3, respectively.

SIRSALE: integrated video database management tools

Science.gov (United States)

Brunie, Lionel; Favory, Loic; Gelas, J. P.; Lefevre, Laurent; Mostefaoui, Ahmed; Nait-Abdesselam, F.

2002-07-01

Video databases became an active field of research during the last decade. The main objective in such systems is to provide users with capabilities to friendly search, access and playback distributed stored video data in the same way as they do for traditional distributed databases. Hence, such systems need to deal with hard issues : (a) video documents generate huge volumes of data and are time sensitive (streams must be delivered at a specific bitrate), (b) contents of video data are very hard to be automatically extracted and need to be humanly annotated. To cope with these issues, many approaches have been proposed in the literature including data models, query languages, video indexing etc. In this paper, we present SIRSALE : a set of video databases management tools that allow users to manipulate video documents and streams stored in large distributed repositories. All the proposed tools are based on generic models that can be customized for specific applications using ad-hoc adaptation modules. More precisely, SIRSALE allows users to : (a) browse video documents by structures (sequences, scenes, shots) and (b) query the video database content by using a graphical tool, adapted to the nature of the target video documents. This paper also presents an annotating interface which allows archivists to describe the content of video documents. All these tools are coupled to a video player integrating remote VCR functionalities and are based on active network technology. So, we present how dedicated active services allow an optimized video transport for video streams (with Tamanoir active nodes). We then describe experiments of using SIRSALE on an archive of news video and soccer matches. The system has been demonstrated to professionals with a positive feedback. Finally, we discuss open issues and present some perspectives.

Colorado Late Cenozoic Fault and Fold Database and Internet Map Server: User-friendly technology for complex information

Science.gov (United States)

Morgan, K.S.; Pattyn, G.J.; Morgan, M.L.

2005-01-01

Internet mapping applications for geologic data allow simultaneous data delivery and collection, enabling quick data modification while efficiently supplying the end user with information. Utilizing Web-based technologies, the Colorado Geological Survey's Colorado Late Cenozoic Fault and Fold Database was transformed from a monothematic, nonspatial Microsoft Access database into a complex information set incorporating multiple data sources. The resulting user-friendly format supports easy analysis and browsing. The core of the application is the Microsoft Access database, which contains information compiled from available literature about faults and folds that are known or suspected to have moved during the late Cenozoic. The database contains nonspatial fields such as structure type, age, and rate of movement. Geographic locations of the fault and fold traces were compiled from previous studies at 1:250,000 scale to form a spatial database containing information such as length and strike. Integration of the two databases allowed both spatial and nonspatial information to be presented on the Internet as a single dataset (http://geosurvey.state.co.us/pubs/ceno/). The user-friendly interface enables users to view and query the data in an integrated manner, thus providing multiple ways to locate desired information. Retaining the digital data format also allows continuous data updating and quick delivery of newly acquired information. This dataset is a valuable resource to anyone interested in earthquake hazards and the activity of faults and folds in Colorado. Additional geologic hazard layers and imagery may aid in decision support and hazard evaluation. The up-to-date and customizable maps are invaluable tools for researchers or the public.

Making Rice Production More Environmentally-Friendly

Directory of Open Access Journals (Sweden)

Norman Uphoff

2016-05-01

Full Text Available Irrigated rice production is one of the most essential agricultural activities for sustaining our global population, and at the same time, one of the agricultural sectors considered most eco-unfriendly. This is because it consumes a larger share of available freshwater resources, competing with varied ecosystems as well as other economic sectors; its paddy fields are responsible for significant emission of greenhouse gases; and the reliance on chemical fertilizers and various agrochemicals contributes to pollution of soils and water systems. These stresses on soils, hydrology and atmosphere are actually not necessary for rice production, which can be increased by modifying agronomic practices though more agroecologically-sound management practices. These, combined under the rubric of the System of Rice Intensification (SRI, can reduce requirements of irrigation water, chemical fertilizer and agrochemicals while increasing paddy yields and farmer’s net incomes. Here we discuss how irrigated rice production can be made more eco-friendly for the benefit of farmers, consumers and the environment. This is achieved by introducing practices that improve the growth and functioning of rice plants’ root systems and enhance the abundance, diversity and activity of beneficial soil organisms that live around plant roots and within the plants themselves as symbiotic endophytes.

Proposal for Managing Eco-efficient Operations Plant Dedicated to Waste Handling at Costa Rican Institute of Electricity

Directory of Open Access Journals (Sweden)

Annie Chinchilla

2015-06-01

Full Text Available In the present study, different eco-efficient specifications were established considered by Ingeniería y Construcciónor IC (Engineering and Construction, a business of the Costa Rican Institute of Electricity (ICE, in Spanish, at the time of developing an operational plant devoted to the handling of waste, in order to make rational use of resources and generate the lowest environmental impact. Initially a general diagnosis was conducted to learn about the current process of waste management in IC, as well as the identification and assessment of its aspects and environmental impacts. An ecoefficiency proposal program was subsequently prepared to be implemented once the ordinary, special and hazardous waste plant is operating. As part of this investigation, eco-efficient measures and technologies were also identified; this can be adopted by IC or any organization to improve its waste management. Finally, it is necessary that the Eco-efficient Management Program (PGE, in Spanish is organized, planned and systematized over time; in addition, the need to have an Ecoefficiency Management Committee arises, which will allow to implement it and measure it through a series of indicators.

Applications of GIS and database technologies to manage a Karst Feature Database

Science.gov (United States)

Gao, Y.; Tipping, R.G.; Alexander, E.C.

2006-01-01

This paper describes the management of a Karst Feature Database (KFD) in Minnesota. Two sets of applications in both GIS and Database Management System (DBMS) have been developed for the KFD of Minnesota. These applications were used to manage and to enhance the usability of the KFD. Structured Query Language (SQL) was used to manipulate transactions of the database and to facilitate the functionality of the user interfaces. The Database Administrator (DBA) authorized users with different access permissions to enhance the security of the database. Database consistency and recovery are accomplished by creating data logs and maintaining backups on a regular basis. The working database provides guidelines and management tools for future studies of karst features in Minnesota. The methodology of designing this DBMS is applicable to develop GIS-based databases to analyze and manage geomorphic and hydrologic datasets at both regional and local scales. The short-term goal of this research is to develop a regional KFD for the Upper Mississippi Valley Karst and the long-term goal is to expand this database to manage and study karst features at national and global scales.

Roles of Eco-labeling in Fisheries Conservation and Sustainability

Directory of Open Access Journals (Sweden)

Olaniyi Alaba Olopade

2017-06-01

Full Text Available An important goal of fisheries management is to ensure that fish stocks are harvested at sustainable levels of fishing pressure. However, the classical maximum sustainable yield theory and its derivatives have not worked for fisheries management. A number of mitigating measures have been suggested of which eco -labeling is one. An ecolabel on a fish product is a distinctive mark or statement indicating that it has been harvested in compliance with preset sustainability standards. This paper examines eco labeling in fisheries as the new strategy to achieve fisheries conservation and sustainability. It emphasizes the importance of fish as critical food resources and new approach to fisheries management through the use of certification programs. It considers the benefits and problems that may accrue from eco-certification of fish harvesting and trade practices in fisheries. This paper, attention is focused on examining the likely option for development of eco-labeling scheme in Nigeria. The paper concludes that the increase awareness amongst stakeholders of the potential role of eco-labeling in conservation and sustainability tools should be established.   Keywords: Fisheries management, fish, conservation, eco-certification

Eco-Friendly Alternative Refrigeration Systems -R-ES-O-N-A-N--CE ...

Indian Academy of Sciences (India)

An electrical signal may be converted to acoustical (i.e. ... Thermoacoustic Refrigeration System. In a simple ... Tc and rejecting Wclste heat power Qh to a heat sink at T h. •. In .... use where eco-friendliness, simplicity, reliability or low cost is.

BIM Guidelines Inform Facilities Management Databases: A Case Study over Time

Directory of Open Access Journals (Sweden)

Karen Kensek

2015-08-01

Full Text Available A building information model (BIM contains data that can be accessed and exported for other uses during the lifetime of the building especially for facilities management (FM and operations. Working under the guidance of well-designed BIM guidelines to insure completeness and compatibility with FM software, architects and contractors can deliver an information rich data model that is valuable to the client. Large owners such as universities often provide these detailed guidelines and deliverable requirements to their building teams. Investigation of the University of Southern California (USC Facilities Management Service’s (FMS website showed a detailed plan including standards, file names, parameter lists, and other requirements of BIM data, which were specifically designated for facilities management use, as deliverables on new construction projects. Three critical details were also unearthed in the reading of these documents: Revit was the default BIM software; COBie was adapted to help meet facilities management goals; and EcoDomus provided a display of the collected data viewed through Navisworks. Published accounts about the Cinema Arts Complex developed with and under these guidelines reported positive results. Further examination with new projects underway reveal the rapidly changing relational database landscape evident in the new USC “Project Record Revit Requirement Execution Plan (PRxP”.

Emerging Biomedical Applications of Nano-Chitins and Nano-Chitosans Obtained via Advanced Eco-Friendly Technologies from Marine Resources

Science.gov (United States)

Muzzarelli, Riccardo A. A.; El Mehtedi, Mohamad; Mattioli-Belmonte, Monica

2014-01-01

The present review article is intended to direct attention to the technological advances made in the 2010–2014 quinquennium for the isolation and manufacture of nanofibrillar chitin and chitosan. Otherwise called nanocrystals or whiskers, n-chitin and n-chitosan are obtained either by mechanical chitin disassembly and fibrillation optionally assisted by sonication, or by e-spinning of solutions of polysaccharides often accompanied by poly(ethylene oxide) or poly(caprolactone). The biomedical areas where n-chitin may find applications include hemostasis and wound healing, regeneration of tissues such as joints and bones, cell culture, antimicrobial agents, and dermal protection. The biomedical applications of n-chitosan include epithelial tissue regeneration, bone and dental tissue regeneration, as well as protection against bacteria, fungi and viruses. It has been found that the nano size enhances the performances of chitins and chitosans in all cases considered, with no exceptions. Biotechnological approaches will boost the applications of the said safe, eco-friendly and benign nanomaterials not only in these fields, but also for biosensors and in targeted drug delivery areas. PMID:25415349

Rapidly Responsive and Flexible Chiral Nematic Cellulose Nanocrystal Composites as Multifunctional Rewritable Photonic Papers with Eco-Friendly Inks.

Science.gov (United States)

Wan, Hao; Li, Xiaofeng; Zhang, Liang; Li, Xiaopeng; Liu, Pengfei; Jiang, Zhiguo; Yu, Zhong-Zhen

2018-02-14

Rapidly responsive and flexible photonic papers are manufactured by coassembly of cellulose nanocrystals (CNCs) and waterborne polyurethane (WPU) latex for fully taking advantage of the chiral nematic structure of CNCs and the flexibility of WPU elastomer. The resulting CNC/WPU composite papers exhibit not only tunable iridescent colors by adjusting the helical pitch size, but also instant optical responses to water and wet gas, ascribed to the easy chain movement of the elastomeric WPU that does not restrict the fast water absorption-induced swelling of CNCs. By choosing water or NaCl aqueous solutions as inks, the colorful patterns on the CNC/WPU photonic paper can be made temporary, durable, or even disguisable. In addition, the photonic paper is simultaneously rewritable for all these three types of patterns, and the disguisable patterns, which are invisible at normal times and show up under stimuli, exhibit a quick reveal conversion just by exhaling on the paper. The rewritability, rapid responsibility, easy fabrication, and the eco-friendly nature of the inks make the flexible photonic paper/ink combination highly promising in sensors, displays, and photonic circuits.

Physical-chemical characteristics of an eco-friendly binder using ternary mixture of industrial wastes

Directory of Open Access Journals (Sweden)

Nguyen, Hoang-Anh

2015-09-01

Full Text Available This study explores the physical-chemical characteristics of paste and mortar with an eco-friendly binder named as SFC cement, produced by a ternary mixture of industrial waste materials of ground granulated blast furnace slag (S, Class F fly ash (FFA, and circulating fluidized bed combustion fly ash (CFA. To trigger the hydration, the CFA, which acted as an alkaline-sulfate activator, was added to the blended mixture of slag and FFA. The water to binder ratio (W/B, curing regime, and FFA addition significantly affected the engineering performances and shrinkage/expansion of the SFC pastes and mortars. The SFC mortars had higher workability than that of ordinary Portland cement (OPC. With similar workability, the SFC mortars had compressive strengths and expansions comparable to OPC mortars. The main hydration products of the hardened SFC cement were ettringite (AFt and C-S-H/C-A-S-H. The transformation of the AFt to the monosulfates was observed as the hydration time increased.Este trabajo estudia las características fisicoquímicas de pastas y morteros con un ligante eco-amigable llamado cemento SFC, producido por una mezcla ternaria de materiales a partir de residuos industriales tales como escorias granuladas de alto horno (S, ceniza volante clase F (FFA, y cenizas volantes de combustión en lecho fluidizado circulante (CFA. Para desencadenar la hidratación, el CFA que actuó como un activador alcalino-sulfato se añadió a la mezcla combinada de escoria y FFA. La relación de agua/ligante (W/B, el tipo de curado, y la adición de FFA afectaron significativamente a las prestaciones mecánicas así como a la retracción/expansión de pastas y morteros de SFC. Los morteros SFC presentaron una trabajabilidad mayor que los correspondientes de cemento de Portland (OPC. Con una trabajabilidad similar, los morteros SFC presentaron resistencias mecánicas y expansión comparables a los morteros de OPC. Los principales productos de hidratación del

Theophylline-assisted, eco-friendly synthesis of PtAu nanospheres at reduced graphene oxide with enhanced catalytic activity towards Cr(VI) reduction.

Science.gov (United States)

Hu, Ling-Ya; Chen, Li-Xian; Liu, Meng-Ting; Wang, Ai-Jun; Wu, Lan-Ju; Feng, Jiu-Ju

2017-05-01

Theophylline as a naturally alkaloid is commonly employed to treat asthma and chronic obstructive pulmonary disorder. Herein, a facile theophylline-assisted green approach was firstly developed for synthesis of PtAu nanospheres/reduced graphene oxide (PtAu NSs/rGO), without any surfactant, polymer, or seed involved. The obtained nanocomposites were applied for the catalytic reduction and removal of highly toxic chromium (VI) using formic acid as a model reductant at 50°C, showing the significantly enhanced catalytic activity and improved recyclability when compared with commercial Pt/C (50%) and home-made Au nanocrystals supported rGO (Au NCs/rGO). It demonstrates great potential applications of the catalyst in wastewater treatment and environmental protection. The eco-friendly route provides a new platform to fabricate other catalysts with enhanced catalytic activity. Copyright © 2016 Elsevier Inc. All rights reserved.

Rheological behavior of aqueous dispersions containing blends of rhamsan and welan polysaccharides with an eco-friendly surfactant.

Science.gov (United States)

Trujillo-Cayado, L A; Alfaro, M C; Raymundo, A; Sousa, I; Muñoz, J

2016-09-01

Small amplitude oscillatory shear and steady shear flow properties of rhamsan gum and welan gum dispersions containing an eco-friendly surfactant (a polyoxyethylene glycerol ester) formulated to mimic the continuous phase of O/W emulsions were studied using the surface response methodology. A second order polynomial equation fitted the influence of surfactant concentration, rhamsan/welan mass ratio and total concentration of polysaccharides. Systems containing blends of rhamsan and welan did not show synergism but thermodynamic incompatibility and made it possible to adjust the linear viscoelastic and low shear rate flow properties to achieve values in between those of systems containing either rhamsan or welan as the only polysaccharide. All the systems studied exhibited weak gel rheological properties as the mechanical spectra displayed the plateau or rubber-like relaxation zone, the linear viscoelastic range was rather narrow and flow curves presented shear thinning behavior, which fitted the power-law equation. While mechanical spectra of the systems studied demonstrated that they did not control the linear viscoelastic properties of the corresponding emulsions, the blend of rhamsan and welan gums was able to control the steady shear flow properties. Copyright © 2016 Elsevier B.V. All rights reserved.

Potential of Taraxacum mongolicum Hand-Mazz for accelerating phytoextraction of cadmium in combination with eco-friendly amendments

Energy Technology Data Exchange (ETDEWEB)

Wei Shuhe, E-mail: shuhewei@yahoo.com.cn [Key Laboratory of Pollution Ecology and Environmental Engineering, Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016 (China); Wang Shanshan [Key Laboratory of Pollution Ecology and Environmental Engineering, Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016 (China); Graduate School of Chinese Academy of Sciences, Beijing 100039 (China); Zhou Qixing, E-mail: zhouqx523@yahoo.com.cn [Key Laboratory of Pollution Ecology and Environmental Engineering, Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016 (China); Zhan Jie [Department of Biotechnology, Liaoning University of Traditional Chinese Medicine, Shenyang 110101 (China); Ma Lihui [Huayou Industrial Company, Liaohe Petroleum Exploration Bureau, Panjin 124010 (China); Wu Zhijie; Sun Tieheng [Key Laboratory of Pollution Ecology and Environmental Engineering, Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016 (China); Prasad, M.N.V. [Department of Plant Sciences, University of Hyderabad, Hyderabad 500046 (India)

2010-09-15

Phytoextraction and phytostabilization are well-established sub-processes of phytoremediation that are being followed for in situ remediation of soils contaminated with toxic metals. Taraxacum mongolicum Hand-Mazz, a newly reported Cd accumulator has shown considerable potential for phytoextracting Cd. This paper investigated the effects of urea and chicken manure on T. mongolicum phytoextracting Cd from soil using pot culture experiments. The results showed that urea application did not affect the Cd concentrations in root, leaf, inflorescence and shoot of T. mongolicum, but chicken manure significantly decreased them (p < 0.05) by 23.5%, 31.5%, 24.8% and 30.4% owing to decreased extractable Cd. Urea and chicken manure significantly increased (p < 0.05) the phytoextraction capacities ({mu}g pot{sup -1}) of T. mongolicum to Cd by 3-5-fold due to the increase in shoot biomass (increased 4-7 folds). Further, addition of urea and chicken manure increased organic matter, nitrogen, phosphorus and potassium, the microorganism count, urease and phosphatase activities of soil indicating their eco-friendly function. Urea is ideal for optimizing phytoextraction of T. mongolicum to Cd, while chicken manure is appropriate for phytostabilization.

A Facile and Eco-friendly Route to Fabricate Poly(Lactic Acid) Scaffolds with Graded Pore Size.

Science.gov (United States)

Scaffaro, Roberto; Lopresti, Francesco; Botta, Luigi; Maio, Andrea; Sutera, Fiorenza; Mistretta, Maria Chiara; La Mantia, Francesco Paolo

2016-10-17

Over the recent years, functionally graded scaffolds (FGS) gaineda crucial role for manufacturing of devices for tissue engineering. The importance of this new field of biomaterials research is due to the necessity to develop implants capable of mimicking the complex functionality of the various tissues, including a continuous change from one structure or composition to another. In this latter context, one topic of main interest concerns the design of appropriate scaffolds for bone-cartilage interface tissue. In this study, three-layered scaffolds with graded pore size were achieved by melt mixing poly(lactic acid) (PLA), sodium chloride (NaCl) and polyethylene glycol (PEG). Pore size distributions were controlled by NaCl granulometry and PEG solvation. Scaffolds were characterized from a morphological and mechanical point of view. A correlation between the preparation method, the pore architecture and compressive mechanical behavior was found. The interface adhesion strength was quantitatively evaluated by using a custom-designed interfacial strength test. Furthermore, in order to imitate the human physiology, mechanical tests were also performed in phosphate buffered saline (PBS) solution at 37 °C. The method herein presented provides a high control of porosity, pore size distribution and mechanical performance, thus offering the possibility to fabricate three-layered scaffolds with tailored properties by following a simple and eco-friendly route.

An analysis of the eco-efficiency of personal computers and mobile phones

NARCIS (Netherlands)

Quariguasi Frota Neto, J.; Bloemhof, J.M.

2012-01-01

Remanufacturing, long perceived as an environmentally friendly initiative, is supported by a number of governments. Yet, the assumption that remanufacturing is desirable to society has never been systematically investigated. In this paper, we examine the effectiveness and eco-efficiency of

Supporting cystic fibrosis disease management during adolescence: the role of family and friends.

Science.gov (United States)

Barker, D H; Driscoll, K A; Modi, A C; Light, M J; Quittner, A L

2012-07-01

Successful management of a complex disease, such as cystic fibrosis (CF), requires support from family and friends; however, few studies have examined social support in adolescents with CF. Twenty-four adolescents were interviewed about the support they receive from family and friends. Interviews were transcribed, coded and analysed to determine the types, frequency and perceived supportiveness of specific behaviours. Both family and friends provided treatment-related support to adolescents with CF. Family provided more tangible support and friends provided more relational support. Adolescents also reported that the manner, timing and context of support behaviours influenced their perceptions of the behaviours' supportiveness. A subset of adolescents (17%) chose not to disclose their diagnosis to their friends. The provision of support appears to be distinct from adolescent's perception of support and there may be some behaviours, such as treatment reminders, that are important to disease management but viewed as less supportive by adolescents. Facilitating increased social support holds the promise of improving disease management during adolescents, but more work is need to understand which aspects of support are related to management outcomes. © 2011 Blackwell Publishing Ltd.

Generalized Database Management System Support for Numeric Database Environments.

Science.gov (United States)

Dominick, Wayne D.; Weathers, Peggy G.

1982-01-01

This overview of potential for utilizing database management systems (DBMS) within numeric database environments highlights: (1) major features, functions, and characteristics of DBMS; (2) applicability to numeric database environment needs and user needs; (3) current applications of DBMS technology; and (4) research-oriented and…

Eco-friendly plasmonic sensors: using the photothermal effect to prepare metal nanoparticle-containing test papers for highly sensitive colorimetric detection.

Science.gov (United States)

Tseng, Shao-Chin; Yu, Chen-Chieh; Wan, Dehui; Chen, Hsuen-Li; Wang, Lon Alex; Wu, Ming-Chung; Su, Wei-Fang; Han, Hsieh-Cheng; Chen, Li-Chyong

2012-06-05

Convenient, rapid, and accurate detection of chemical and biomolecules would be a great benefit to medical, pharmaceutical, and environmental sciences. Many chemical and biosensors based on metal nanoparticles (NPs) have been developed. However, as a result of the inconvenience and complexity of most of the current preparation techniques, surface plasmon-based test papers are not as common as, for example, litmus paper, which finds daily use. In this paper, we propose a convenient and practical technique, based on the photothermal effect, to fabricate the plasmonic test paper. This technique is superior to other reported methods for its rapid fabrication time (a few seconds), large-area throughput, selectivity in the positioning of the NPs, and the capability of preparing NP arrays in high density on various paper substrates. In addition to their low cost, portability, flexibility, and biodegradability, plasmonic test paper can be burned after detecting contagious biomolecules, making them safe and eco-friendly.

Branding a School-Based Campaign Combining Healthy Eating and Eco-friendliness.

Science.gov (United States)

Folta, Sara C; Koch-Weser, Susan; Tanskey, Lindsay A; Economos, Christina D; Must, Aviva; Whitney, Claire; Wright, Catherine M; Goldberg, Jeanne P

2018-02-01

To develop a branding strategy for a campaign to improve the quality of foods children bring from home to school, using a combined healthy eating and eco-friendly approach and for a control campaign focusing solely on nutrition. Formative research was conducted with third- and fourth-grade students in lower- and middle-income schools in Greater Boston and their parents. Phase I included concept development focus groups. Phase II included concept testing focus groups. A thematic analysis approach was used to identify key themes. In phase I, the combined nutrition and eco-friendly messages resonated; child preference emerged as a key factor affecting food from home. In phase II, key themes included fun with food and an element of mystery. Themes were translated into a concept featuring food face characters. Iterative formative research provided information necessary to create a brand that appealed to a specified target audience. Copyright © 2017. Published by Elsevier Inc.

Eco-industrial initiatives in Asia : issues and opportunities

Energy Technology Data Exchange (ETDEWEB)

Chiu, A.S.F. [Industrial Ecology Asia Network, (China)

2002-07-01

This Power Point presentation discusses the impact of industry urban-suburban relocation. This relocation to industrial zones is on the rise in Asia, where there are now approximately 4,000 industrial estates, resulting from export-oriented businesses, cluster-based activities and collective management systems. Eco-industrial parks are zones that promote sustainable development through the combined benefits of environmental, social and economic initiatives. Eco-industrial parks enact environmental management laws and initiate eco-industrial development projects. Asia is diverse in access to natural resources, economics, politics, and level of development and access to natural resources. The paper describes how eco-business and a recycling-oriented economic society is being adopted in countries in Asia including China, Japan, Thailand, Philippines, Indonesia, Malaysia, Vietnam and India. tabs., figs.

Negative Effects of Learning Spreadsheet Management on Learning Database Management

Science.gov (United States)

Vágner, Anikó; Zsakó, László

2015-01-01

A lot of students learn spreadsheet management before database management. Their similarities can cause a lot of negative effects when learning database management. In this article, we consider these similarities and explain what can cause problems. First, we analyse the basic concepts such as table, database, row, cell, reference, etc. Then, we…

Landscape of Industry: Transformation of (Eco Industrial Park through history

Directory of Open Access Journals (Sweden)

Archana Sharma

2013-11-01

Full Text Available The landscape of industry has been changing over time. Industry has transformed and many tangents have emerged from the sporadic home-based cottage industries to geographically scattered large manufacturing industries to co-located industrial parks to environment friendly eco-industrial parks. Curiosity about the catalysts that bring about the transformation of industrial landscape is the motivation of this article. Through the narrative on Industrial Park and the gradual shift towards Eco-Industrial Park, this article aims to shed light on the context and conditions that act as catalysts for industrial transformations, so as to serve as a reference for predicting future changes in industrial landscape.

Fuzzy Cognitive Map-based selection of TRIZ (Theory of Inventive Problem Solving) trends for eco-innovation of ceramic industry products

OpenAIRE

Vidal, Rosario; Salmerón, José Luís; Mena Nieto, Angel Isidro; Chulvi Ramos, Vicente

2015-01-01

Several studies have been developed implementing TRIZ (Russian acronym of Theory of Inventive Problem Solving) for eco-innovative design tasks, es- tablishing a link between eco-efficiency and the Inventive Principles and the Contradiction Matrix. However, very few works have linked TRIZ evolution trends and eco-design. This paper presents an innovative methodology to help designers to pre- dict technological evolutions for more environmentally friendly products. The main novelty of our pr...

Eco-Friendly Acaricidal Effects of Nylon 66 Nanofibers via Grafted Clove Bud Oil-Loaded Capsules on House Dust Mites.

Science.gov (United States)

Kim, Joo Ran; Kim, Seong Hun

2017-07-10

Acaricidal nylon 66 fabrics (AN66Fs) grafted with clove oil-loaded microcapsules (COMCs) were developed against Dermatophagoides farina ( D. gallinae ). The average diameter was about 2.9 µm with a range of 100 nm-8.5 µm. COMCs carried clove oil loading of about 65 vol %. COMCs were chemically grafted to electrospun nylon nanofibers by the chemical reactions between -OH groups of COMCs and -COOH end groups of nylon fabrics to form ester linkages. AN66Fs had an effect on D. farinae depending on COMCs loadings. The increase in COMCs loading of AN66Fs from 5 to 15 wt % increased from 22% to 93% mortality against D. farinae within 72 h. However, AN66Fs containing over 20 wt % COMCs were more effective, showing up to 100% mortality within 24 h because the large amount of monoterpene alcohol, eugenol. This research suggests the use of clove oil and its major constituent eugenol as eco-friendly bioactive agents that can serve as a replacement for synthetic acaricides in controlling the population of D. farinae .

TransECO{sub 2}. Demonstration project: Environmental and economic benefits by environmental management in freight transportation. Main report; TransECO{sub 2}. Demonstrationsprojekt: Miljoemaessige og oekonomiske benefits ved miljoestyring i godstransport. Hovedrapport

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The aim of the transECO{sub 2} project has was to carry out cooperation projects between companies in order to demonstrate an effect for the environment and for the economy of the companies (earnings and costs) of environmental management related to transportation of goods. 10 demonstration projects were carried thorugh in cooperation with 14 companies. 8 subjects were analysed through the transECO{sub 2} project: 1. Environmental data; 2. Benefits from the environmental management work; 3. Use of new technology; 4. Cooperation; 5. Environment and logistics; 6. Education and competence; 7. Environment and business strategy; 8. Environmental statement/tagging. (EHS)

TWRS technical baseline database manager definition document

International Nuclear Information System (INIS)

Acree, C.D.

1997-01-01

This document serves as a guide for using the TWRS Technical Baseline Database Management Systems Engineering (SE) support tool in performing SE activities for the Tank Waste Remediation System (TWRS). This document will provide a consistent interpretation of the relationships between the TWRS Technical Baseline Database Management software and the present TWRS SE practices. The Database Manager currently utilized is the RDD-1000 System manufactured by the Ascent Logic Corporation. In other documents, the term RDD-1000 may be used interchangeably with TWRS Technical Baseline Database Manager

‘HighChest’: An Augmented Freezer Designed for Smart Food Management and Promotion of Eco-Efficient Behaviour

Directory of Open Access Journals (Sweden)

Manuele Bonaccorsi

2017-06-01

Full Text Available This paper introduces HighChest, an innovative smart freezer designed to promote energy efficient behavior and the responsible use of food. Introducing a novel human–machine interface (HMI design developed through assessment phases and a user involvement stage, HighChest is state of the art, featuring smart services that exploit embedded sensors and Internet of things functionalities, which enhance the local capabilities of the appliance. The industrial design thinking approach followed for the advanced HMI is intended to maximize the social impact of the food management service, enhancing both the user experience of the product and the user’s willingness to adopt eco- and energy-friendly behaviors. The sensor equipment realizes automatic recognition of food by learning from the users, as well as automatic localization inside the deposit space. Moreover, it provides monitoring of the appliance’s usage, avoiding temperature and humidity issues related to improper use. Experimental tests were conducted to evaluate the localization system, and the results showed 100% accuracy for weights greater or equal to 0.5 kg. Drifts due to the lid opening and prolonged usage time were also measured, to implement automatic reset corrections.

Exceedingly biocompatible and thin-layered reduced graphene oxide nanosheets using an eco-friendly mushroom extract strategy

Science.gov (United States)

Muthoosamy, Kasturi; Bai, Renu Geetha; Abubakar, Ibrahim Babangida; Sudheer, Surya Mudavasseril; Lim, Hong Ngee; Loh, Hwei-San; Huang, Nay Ming; Chia, Chin Hua; Manickam, Sivakumar

2015-01-01

Purpose A simple, one-pot strategy was used to synthesize reduced graphene oxide (RGO) nanosheets by utilizing an easily available over-the-counter medicinal and edible mushroom, Ganoderma lucidum. Methods The mushroom was boiled in hot water to liberate the polysaccharides, the extract of which was then used directly for the reduction of graphene oxide. The abundance of polysaccharides present in the mushroom serves as a good reducing agent. The proposed strategy evades the use of harmful and expensive chemicals and avoids the typical tedious reaction methods. Results More importantly, the mushroom extract can be easily separated from the product without generating any residual byproducts and can be reused at least three times with good conversion efficiency (75%). It was readily dispersible in water without the need of ultrasonication or any surfactants; whereas 5 minutes of ultrasonication with various solvents produced RGO which was stable for the tested period of 1 year. Based on electrochemical measurements, the followed method did not jeopardize RGO’s electrical conductivity. Moreover, the obtained RGO was highly biocompatible to not only colon (HT-29) and brain (U87MG) cancer cells, but was also viable towards normal cells (MRC-5). Conclusion Besides being eco-friendly, this mushroom based approach is easily scalable and demonstrates remarkable RGO stability and biocompatibility, even without any form of functionalization. PMID:25759577

Fabrication of Cu-Ag core-shell bimetallic superfine powders by eco-friendly reagents and structures characterization

International Nuclear Information System (INIS)

Zhao Jun; Zhang Dongming; Zhao Jie

2011-01-01

Superfine bimetallic Cu-Ag core-shell powders were synthesized by reduction of copper sulfate pentahydrate and silver nitrate with eco-friendly ascorbic acid as a reducing agent and cyclodextrins as a protective agent in an aqueous system. The influence of Ag/Cu ratio on coatings was investigated. Ag was homogeneously distributed on the surface of Cu particles at a mole ratio of Ag/Cu=1. FE-SEM showed an uniformity of Ag coatings on Cu particles. Antioxidation of Cu particles was improved by increasing Ag/Cu ratio. TEM-EDX and UV-vis spectra also revealed that Cu cores were covered by Ag nanoshells on the whole. The surface composition analysis by XPS indicated that only small parts of Cu atoms in the surface were oxidized. It was noted that the hindrance of cyclodextrins chemisorbed on particles plays an important role in forming high quality and good dispersity Cu-Ag (Cu-Ag) core-shell powders. - Graphical abstract: Mechanism of fabricating Cu-Ag particles with good dispersibility using β-CDs as a protective agent was studied because of its special structure. Highlights: → Green supramolecular β-CD used as a protective agent and ascorbic acid(Vc) as a reducing agent to fabricate Cu-Ag powders. → Particles are monodisperse and the diameter is close to nanoscale(100-150 nm). → Resistance of Cu particles to oxidation was higher. → Formation mechanism explained.

Selection of nuclear power information database management system

International Nuclear Information System (INIS)

Zhang Shuxin; Wu Jianlei

1996-01-01

In the condition of the present database technology, in order to build the Chinese nuclear power information database (NPIDB) in the nuclear industry system efficiently at a high starting point, an important task is to select a proper database management system (DBMS), which is the hinge of the matter to build the database successfully. Therefore, this article explains how to build a practical information database about nuclear power, the functions of different database management systems, the reason of selecting relation database management system (RDBMS), the principles of selecting RDBMS, the recommendation of ORACLE management system as the software to build database and so on

Eco-friendly synthesis of gelatin-capped bimetallic Au-Ag nanoparticles for chemiluminescence detection of anticancer raloxifene hydrochloride.

Science.gov (United States)

Alarfaj, Nawal A; El-Tohamy, Maha F

2016-09-01

This study described the utility of green analytical chemistry in the synthesis of gelatin-capped silver, gold and bimetallic gold-silver nanoparticles (NPs). The preparation of nanoparticles was based on the reaction of silver nitrate or chlorauric acid with a 1.0 wt% aqueous gelatin solution at 50°C. The gelatin-capped silver, gold and bimetallic NPs were characterized using transmission electron microscopy, UV-vis, X-ray diffraction and Fourier transform infrared spectroscopy, and were used to enhance a sensitive sequential injection chemiluminescence luminol-potassium ferricyanide system for determination of the anticancer drug raloxifene hydrochloride. The developed method is eco-friendly and sensitive for chemiluminescence detection of the selected drug in its bulk powder, pharmaceutical injections and biosamples. After optimizing the conditions, a linear relationship in the range of 1.0 × 10(-9) to 1.0 × 10(-1)  mol/L was obtained with a limit of detection of 5.0 × 10(-10)  mol/L and a limit of quantification of 1.0 × 10(-9)  mol/L. Statistical treatment and method validation were performed based on ICH guidelines. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Eragrostis plana Nees as a novel eco-friendly adsorbent for removal of crystal violet from aqueous solutions.

Science.gov (United States)

Filho, Augusto Cezar D; Mazzocato, Ana C; Dotto, Guilherme L; Thue, Pascal S; Pavan, Flávio A

2017-08-01

Eragrostis plana Nees (EPN) was used as new and eco-friendly adsorbent for the removal of crystal violet dye (CV) from aqueous solution. Specific surface area (BET), scanning electron microscopy (SEM), infrared spectroscopy (ATR-FTIR), point of zero charge (pH PZC ), and modified Boehm titration method were used to characterize the EPN material. The effects of initial pH of solution, adsorbent mass, contact time and initial dye concentration, and temperature were studied in batch adsorption mode. Kinetic data were evaluated by pseudo-first-order and pseudo-second-order models. The result exhibited that pseudo-second-order model well described the adsorption kinetics of CV onto EPN. Langmuir, Freundlich, and Sips isotherm models were used for analysis of the isothermal data. The equilibrium data of adsorption of CV onto EPN was better fitted with the Sips isotherm. Based on the Sips isotherm model, the maximum adsorption capacity was 76.20 ± 1.20 mg g -1 at 333 K. A high desorption of CV from EPN was obtained using 1.00 mol L -1 of CH 3 COOH as eluent. The thermodynamic data indicated that the adsorption was spontaneous, endothermic, and physical process. EPN can be used as alternative adsorbent to remove CV from aqueous solution.

Studies on soy protein isolate/polyvinyl alcohol hybrid nanofiber membranes as multi-functional eco-friendly filtration materials

International Nuclear Information System (INIS)

Fang, Qun; Zhu, Ming; Yu, Siruo; Sui, Gang; Yang, Xiaoping

2016-01-01

Highlights: • Biodegradable filtration membranes were prepared. • Polar groups in the membrane surface helped capture fine particles. • Loading filtration efficiency can reach 99.99% in the case of small pressure drop. • Filtration membrane showed antimicrobial activity to Escherichia coli. - Abstract: A biodegradable and multifunctional air filtration membrane was prepared by electrospinning of soy protein isolate (SPI)/polyvinyl alcohol (PVA) system in this paper. The optimized SPI/PVA proportion in the spinning solution was determined according to the analyses of microstructure, surface chemical characteristic and mechanical property of the hybrid nanofiber membranes. Under the preferred preparation condition, two kinds of polymer materials displayed a good compatibility in the hybrid nanofibers, and a large number of polar groups existed in the membrane surface. The loading filtration efficiency of the nanofiber membrane with optimal material ratio and areal density can reach 99.99% after test of 30 min for fine particles smaller than 2.5 μm in the case of small pressure drop. Besides, this kind of filtration membrane showed an antimicrobial activity to Escherichia coli in the study. The SPI/PVA hybrid nanofiber membrane with proper material composition and microstructure can be used as a new type of high performance eco-friendly filtration materials.

Studies on soy protein isolate/polyvinyl alcohol hybrid nanofiber membranes as multi-functional eco-friendly filtration materials

Energy Technology Data Exchange (ETDEWEB)

Fang, Qun; Zhu, Ming; Yu, Siruo; Sui, Gang, E-mail: suigang@mail.buct.edu.cn; Yang, Xiaoping

2016-12-15

Highlights: • Biodegradable filtration membranes were prepared. • Polar groups in the membrane surface helped capture fine particles. • Loading filtration efficiency can reach 99.99% in the case of small pressure drop. • Filtration membrane showed antimicrobial activity to Escherichia coli. - Abstract: A biodegradable and multifunctional air filtration membrane was prepared by electrospinning of soy protein isolate (SPI)/polyvinyl alcohol (PVA) system in this paper. The optimized SPI/PVA proportion in the spinning solution was determined according to the analyses of microstructure, surface chemical characteristic and mechanical property of the hybrid nanofiber membranes. Under the preferred preparation condition, two kinds of polymer materials displayed a good compatibility in the hybrid nanofibers, and a large number of polar groups existed in the membrane surface. The loading filtration efficiency of the nanofiber membrane with optimal material ratio and areal density can reach 99.99% after test of 30 min for fine particles smaller than 2.5 μm in the case of small pressure drop. Besides, this kind of filtration membrane showed an antimicrobial activity to Escherichia coli in the study. The SPI/PVA hybrid nanofiber membrane with proper material composition and microstructure can be used as a new type of high performance eco-friendly filtration materials.

A novel water-based process produces eco-friendly bio-adhesive made from green cross-linked soybean soluble polysaccharide and soy protein.

Science.gov (United States)

Yuan, Cheng; Chen, Mingsong; Luo, Jing; Li, Xiaona; Gao, Qiang; Li, Jianzhang

2017-08-01

In this study, an eco-friendly soy protein adhesive was developed that utilized two components from soybean meal without addition of any toxic material. A plant-based, water-soluble and inexpensive soybean soluble polysaccharide was used as the novel renewable material to combine with soy protein to produce a soy protein adhesive. Three-plywood was fabricated with the resulting adhesive, and its wet shear strength was measured. The results showed the wet shear strength of plywood bonded by the adhesive reached 0.99MPa, meeting the water resistance requirement for interior use panels. This improvement was attributed to the following reasons: (1) Combination of cross-linked soybean soluble polysaccharide and soy protein formed an interpenetrating network structure, improving the thermal stability and water resistance of the cured adhesive. (2) Adding CL-SSPS decreased the adhesive viscosity to 15.14Pas, which increased the amount of the adhesive that penetrate the wood's surface and formed more interlocks. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mechanisms of Zn(II) binded to collagen and its effect on the capacity of eco-friendly Zn-Cr combination tanning system.

Science.gov (United States)

Cao, Shan; Liu, Bing; Cheng, Baozhen; Lu, Fuping; Wang, Yanping; Li, Yu

2017-01-05

The eco-friendly combination tanning process has been developed to reduce chromium in existing researches, which is based on zinc tanning agents. This can be considered as a less-chrome substitute for current tanning process. To gain deeper understanding of the binding mechanisms of zinc-collagen interaction, which are affected by tanning pH, experiments have been carried out. Analysis in this paper reveals how chemical bonds from the collagen's main function groups combine with zinc. XPS and NIR data was analyzed for further understanding of where the zinc binding sites lie on collagen fibers at different pH. The results indicate that high pH is helpful to amino-binding sites while low pH promotes carboxyl-binding sites on collagen fibers. Furthermore, from the effect of Zinc-chrome combination tanning, we can see that the new method reduces the chromium dosage in tanning process compared to the conventional chrome tanning method. Copyright © 2016 Elsevier B.V. All rights reserved.

Eco-friendly ionic liquid based ultrasonic assisted selective extraction coupled with a simple liquid chromatography for the reliable determination of acrylamide in food samples.

Science.gov (United States)

Albishri, Hassan M; El-Hady, Deia Abd

2014-01-01

Acrylamide in food has drawn worldwide attention since 2002 due to its neurotoxic and carcinogenic effects. These influences brought out the dual polar and non-polar characters of acrylamide as they enabled it to dissolve in aqueous blood medium or penetrate the non-polar plasma membrane. In the current work, a simple HPLC/UV system was used to reveal that the penetration of acrylamide in non-polar phase was stronger than its dissolution in polar phase. The presence of phosphate salts in the polar phase reduced the acrylamide interaction with the non-polar phase. Furthermore, an eco-friendly and costless coupling of the HPLC/UV with ionic liquid based ultrasonic assisted extraction (ILUAE) was developed to determine the acrylamide content in food samples. ILUAE was proposed for the efficient extraction of acrylamide from bread and potato chips samples. The extracts were obtained by soaking of potato chips and bread samples in 1.5 mol L(-1) 1-butyl-3-methylimmidazolium bromide (BMIMBr) for 30.0 and 60.0 min, respectively and subsequent chromatographic separation within 12.0 min using Luna C18 column and 100% water mobile phase with 0.5 mL min(-1) under 25 °C column temperature at 250 nm. The extraction and analysis of acrylamide could be achieved within 2h. The mean extraction efficiency of acrylamide showed adequate repeatability with relative standard deviation (RSD) of 4.5%. The limit of detection and limit of quantitation were 25.0 and 80.0 ng mL(-1), respectively. The accuracy of the proposed method was tested by recovery in seven food samples giving values ranged between 90.6% and 109.8%. Therefore, the methodology was successfully validated by official guidelines, indicating its reliability to be applied to analysis of real samples, proven to be useful for its intended purpose. Moreover, it served as a simple, eco-friendly and costless alternative method over hitherto reported ones. © 2013 Elsevier B.V. All rights reserved.

Records Management Database

Data.gov (United States)

US Agency for International Development — The Records Management Database is tool created in Microsoft Access specifically for USAID use. It contains metadata in order to access and retrieve the information...

Database Support for Workflow Management: The WIDE Project

NARCIS (Netherlands)

Grefen, P.W.P.J.; Pernici, B; Sánchez, G.; Unknown, [Unknown

1999-01-01

Database Support for Workflow Management: The WIDE Project presents the results of the ESPRIT WIDE project on advanced database support for workflow management. The book discusses the state of the art in combining database management and workflow management technology, especially in the areas of

The solvent management plan as a source of eco-efficiency indicators

International Nuclear Information System (INIS)

D'Amico, Flaviano; Valardi, Maria; Buleandra, Marian Mihai; Tanase, Ion

2006-01-01

Reducing emissions of VOCs (volatil organic compounds) is a top-priority environmental goal, because when they react in the atmosphere with NO X , CO and solar radiation, they form tropospheric ozone, a pollutant that has a large environmental impact and contributes to world climate change. The most innovative part of the solvent directive concerns the Solvent Management Plan (SMP): a very useful tool, especially for small and medium-sized enterprises. With relatively small changes, the SMP can be turned into a Solvent Management System (SMS) having the features of an Environmental Management System. By applying an SMP-SMS, a great number of indicators can be developed, analysed and used to improve eco-efficiency; furthermore, the SMP-SMS can help local authorities in charge of environmental control procedures, in decision-making processes [it

Management of virtualized infrastructure for physics databases

International Nuclear Information System (INIS)

Topurov, Anton; Gallerani, Luigi; Chatal, Francois; Piorkowski, Mariusz

2012-01-01

Demands for information storage of physics metadata are rapidly increasing together with the requirements for its high availability. Most of the HEP laboratories are struggling to squeeze more from their computer centers, thus focus on virtualizing available resources. CERN started investigating database virtualization in early 2006, first by testing database performance and stability on native Xen. Since then we have been closely evaluating the constantly evolving functionality of virtualisation solutions for database and middle tier together with the associated management applications – Oracle's Enterprise Manager and VM Manager. This session will detail our long experience in dealing with virtualized environments, focusing on newest Oracle OVM 3.0 for x86 and Oracle Enterprise Manager functionality for efficiently managing your virtualized database infrastructure.

On eco-planning for an eco-demonstration park (EDP) and sustainability-Case study of the Luhua EDP in the Chongming Island of Shanghai,China

Institute of Scientific and Technical Information of China (English)

2008-01-01

The background,concept,connotation,principles,and methods ofeco-planning for an Eco-Demonstration Park (EDP) and sustainability were examined based on a case study of the Luhua EDP in the Chongming Island of Shanghai,China,which is an important part of Shanghai Eco-city planning and construction in the 21st century.By analyzing natural,social and economic conditions,calculating population using the land capacity eco-model,eco-function zoning,and eco-construction,an innovative eco-industrial structure and technical chain were formulated.A comprehensive eco-planning scheme for the EDP was proposed,including planning and management strategies for subsystems of efficient industry,good quality human settlement,high standard eco-construction and eco-tourism as well as effective environmental protection and attractive landscape.The EDP should be an area with coordinated and sustainable economic,social and environmental subsystems.Eco-planning for the EDP should be a very important part of eco-city planning and sustainability.The paper aims to set up a theoretical framework and practical basis for eco-planning and promoting harmony between human and nature.

Microcomputer Database Management Systems for Bibliographic Data.

Science.gov (United States)

Pollard, Richard

1986-01-01

Discusses criteria for evaluating microcomputer database management systems (DBMS) used for storage and retrieval of bibliographic data. Two popular types of microcomputer DBMS--file management systems and relational database management systems--are evaluated with respect to these criteria. (Author/MBR)

Neutron scattering studies of eco-friendly functional materials

International Nuclear Information System (INIS)

Mishra, S.K.; Gupta, M.K.; Mittal, R.; Krishna, P.S.R.; Chaplot, S.L.

2016-01-01

Niobate based materials are environment friendly and appropriate for wide piezoelectric applications due to their piezo-response that is comparable to Pb(Zr Ti)O_3 beyond the technological application, NaNbO_3 has been a rich model system for understanding of mechanisms of structural phase transitions when subject to changes in thermodynamical conditions like: temperature, pressure, and/or composition, particle size and external stimuli like electric/magnetic field etc. In the present work, we report systematic investigation of structural phase transitions with variations in temperature, external pressure and chemical pressure (via compositional modification) using the neutron scattering technique. (author)

Tensile properties and water absorption assessment of linear low-Density Polyethylene/Poly (Vinyl Alcohol)/Kenaf composites: effect of eco-friendly coupling agent

Science.gov (United States)

Pang, A. L.; Ismail, H.; Abu Bakar, A.

2018-02-01

Linear low-density polyethylene (LLDPE)/poly (vinyl alcohol) (PVOH) filled with untreated kenaf (UT-KNF) and eco-friendly coupling agent (ECA)-treated kenaf (ECAT-KNF) were prepared using ThermoHaake internal mixer, respectively. Filler loadings of UT-KNF and ECAT-KNF used in this study are 10 and 40 parts per hundred parts of resin (phr). The effect of ECA on tensile properties and water absorption of LLDPE/PVOH/KNF composites were investigated. Field emission scanning electron microscopy (FESEM) analysis was applied to visualize filler-matrix adhesion. The results indicate LLDPE/PVOH/ECAT-KNF composites possess higher tensile strength and tensile modulus, but lower elongation at break compared to LLDPE/PVOH/UT-KNF composites. The morphological studies of tensile fractured surfaces using FESEM support the increment in tensile properties of LLDPE/PVOH/ECAT-KNF composites. Nevertheless, LLDPE/PVOH/UT-KNF composites reveal higher water absorption compared to LLDPE/PVOH/ECAT-KNF composites.

Adsorption at the biocompatible α-pinene-water interface and emulsifying properties of two eco-friendly surfactants.

Science.gov (United States)

Trujillo-Cayado, Luis Alfonso; Ramírez, Pablo; Alfaro, María Carmen; Ruíz, Manuela; Muñoz, José

2014-10-01

In this contribution, we provide an accurate characterization at the α-pinene/water interface of two commercial polyoxytheylene glycerol ester surfactants which differ in the number of ethylene oxide (EO) groups, comprising a systematic analysis of interfacial pressure isotherms, dynamic curves, interfacial rheology and emulsifying properties. Polyoxyethylene glycerol esters derived from cocoa oil are non-ionic surfactants obtained from a renewable source which fulfill the environmental and toxicological requirements to be used as eco-friendly emulsifying agents. α-Pinene is a renewable biosolvent completely insoluble in water, which could find numerous applications. Interfacial rheology and equilibrium interfacial pressure data fitted a rigorous reorientation model that assumes that the surfactant molecules, when adsorbed at the interface, can acquire two orientations. The surfactant with the highest number of EO groups (Levenol C201) turned out to be more surface active at the α-pinene/water interface. In addition, the surfactant with the lowest number of EO groups (Levenol H&B) is solubilized into the adjacent oil phase. Slightly concentrated α-pinene emulsions were obtained using both surfactants. Nevertheless, more stable α-pinene emulsions with smaller droplet sizes and lower polidispersity were obtained when Levenol C201 was used as emulsifier instead of Levenol H&B. The systematic characterization presented in this work provides important new findings on the interfacial and emulsifying properties of polyoxytheylene glycerol ester surfactants, which can be applied in the rational development of new biocompatible products. Copyright © 2014 Elsevier B.V. All rights reserved.

Eco-friendly preparation of zinc oxide nanoparticles using Tabernaemontana divaricata and its photocatalytic and antimicrobial activity.

Science.gov (United States)

Raja, A; Ashokkumar, S; Pavithra Marthandam, R; Jayachandiran, J; Khatiwada, Chandra Prasad; Kaviyarasu, K; Ganapathi Raman, R; Swaminathan, M

2018-04-01

The present work reports the green synthesis of Zinc Oxide Nanoparticles (ZnO NPs) using aqueous Tabernaemontana divaricata green leaf extract. ZnO NPs have been characterized by X-ray diffraction (XRD), Ultra Violet-Visible (UV-Vis) studies, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Fourier Transform-Infra Red (FT-IR) analysis. XRD pattern analysis confirms the presence of pure hexagonal wurtzite crystalline structure of ZnO. The TEM images reveal the formation of spherical shape ZnO NPs with the sizes ranging from 20 to 50 nm. The FT-IR analysis suggests that the obtained ZnO NPs have been stabilized through the interactions of steroids, terpenoids, flavonoids, phenyl propanoids, phenolic acids and enzymes present in the leaf extract. Mechanism for the formation of ZnO NPs using Tabernaemontana divaricata as bioactive compound is proposed. As prepared ZnO NPs reveals antibacterial activity against three bacterial strains, Salmonella paratyphi, Escherichia coli and Staphylococcus aureus. The ZnO NPs shows higher antibacterial activity against S. aureus and E. coli and lesser antibacterial activity against S. paratyphi compared to the standard pharmaceutical formulation. Photocatalytic activity of synthesized ZnO NPs was analyzed for methylene blue (MB) dye degradation with sunlight. Almost complete degradation of dye occurred in 90 min. This nano-ZnO, prepared by eco-friendly method will be much useful for dye removal and bacterial decontamination. Copyright © 2018. Published by Elsevier B.V.

Facile fabrication of eco-friendly nano-mosquitocides: Biophysical characterization and effectiveness on neglected tropical mosquito vectors.

Science.gov (United States)

Govindarajan, Marimuthu; Hoti, S L; Benelli, Giovanni

2016-12-01

Mosquito (Diptera: Culicidae) vectors are solely responsible for transmitting important diseases such as malaria, dengue, chikungunya, Japanese encephalitis, lymphatic filariasis and Zika virus. Eco-friendly control tools of Culicidae vectors are a priority. In this study, we proposed a facile fabrication process of poly-disperse and stable silver nanoparticles (Ag NPs) using a cheap leaf extract of Ichnocarpus frutescens (Apocyanaceae). Bio-reduced Ag NPs were characterized by UV-vis spectrophotometry, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The acute toxicity of I. frutescens leaf extract and green-synthesized Ag NPs was evaluated against larvae of the malaria vector Anopheles subpictus, the dengue vector Aedes albopictus and the Japanese encephalitis vector Culex tritaeniorhynchus. Compared to the leaf aqueous extract, Ag NPs showed higher toxicity against A. subpictus, A. albopictus, and C. tritaeniorhynchus with LC 50 values of 14.22, 15.84 and 17.26μg/mL, respectively. Ag NPs were found safer to non-target mosquito predators Anisops bouvieri, Diplonychus indicus and Gambusia affinis, with LC 50 values ranging from 636.61 to 2098.61μg/mL. Overall, this research firstly shed light on the mosquitocidal potential of I. frutescens, a potential bio-resource for rapid, cheap and effective synthesis of poly-disperse and highly stable silver nanocrystals. Copyright © 2016 Elsevier Inc. All rights reserved.

Review on management of horticultural plant germplasm resources and construction of related database

Directory of Open Access Journals (Sweden)

Pan Jingxian

2017-02-01

Full Text Available The advances of databases on horticulture germplasm resources from China and abroad was briefly reviewed and the key technologies were discussed in details,especially in descriptors of data collection of germplasm resources. The prospective and challenges of databases were also discussed. It was evident that there was an urgent need to develop the databases of horticulture germplasm resources,with increasing diversity of germplasm,more user friendly and systematically access to the databases.

l-Glutamic acid assisted eco-friendly one-pot synthesis of sheet-assembled platinum-palladium alloy networks for methanol oxidation and oxygen reduction reactions.

Science.gov (United States)

Shi, Ya-Cheng; Mei, Li-Ping; Wang, Ai-Jun; Yuan, Tao; Chen, Sai-Sai; Feng, Jiu-Ju

2017-10-15

In this work, bimetallic platinum-palladium sheet-assembled alloy networks (PtPd SAANs) were facilely synthesized by an eco-friendly one-pot aqueous approach under the guidance of l-glutamic acid at room temperature, without any additive, seed, toxic or organic solvent involved. l-Glutamic acid was served as the green shape-director and weak-stabilizing agent. A series of characterization techniques were employed to examine the morphology, structure and formation mechanism of the product. The architectures exhibited improved electrocatalytic activity and durable ability toward methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR) in contrast with commercial Pt black and Pd black catalysts. This is ascribed to the unique structures of the obtained PtPd SAANs and the synergistic effects of the bimetals. These results demonstrate the potential application of the prepared catalyst in fuel cells. Copyright © 2017 Elsevier Inc. All rights reserved.

OPTIMALISASI SISTEM PENGELOLAAN SAMPAH DI LINGKUNGAN KAMPUS UNIVERSITAS DIPONEGORO: UPAYA MENUJU UNDIP ECO-CAMPUS

Directory of Open Access Journals (Sweden)

Oktiawan Wiharyanto

2012-07-01

Full Text Available Diponegoro University as a leading institution of higher education in Central Java is expected to be a pioneerand an example in terms of waste management. But in fact now has Undip not have an adequate system of wastemanagement. Current conditions almost all existing studies program has been concentrated in the campus areaTembalang still treats conventional waste by dumping it in the trash is mixed with and without prior sortingwhich will eventually increase the weight of the existing TPS and TPA. This makes the system of wastemanagement in the UNDIP really need to be evaluated and reviewed. This study dimaksudakan to optimizewaste management system with the principles of the 3R (reuse, reduce, recycle in order to minimize the wasteproblem. Besides this optimization also as an effort to realize the vision of the university Undip asenvironmentally friendly (eco-campus and a role model for waste management agencies and other institutions

Developing community-based mangrove management through eco-tourism in North Sumatra, Indonesia

Science.gov (United States)

Basyuni, M.; Bimantara, Y.; Siagian, M.; Wati, R.; Slamet, B.; Sulistiyono, N.; Nuryawan, A.; Leidonad, R.

2018-03-01

Mangrove forests in North Sumatera, Indonesia existed in the east coast of Sumatera Island and commonly thrived in Langkat, Deli Serdang, Batubara, Tanjung Balai, Asahan, Labuhanbatu until Serdang Bedagai. The present study describes the developing community-based mangrove management (CBMM) through eco-tourism in two locations, Lubuk Kertang (LK) of Langkat and Sei Nagalawan (SN) of Serdang Bedagai, North Sumatra, Indonesia. Mangrove ecosystem, coastal villagers and visitors, and related stakeholder were analyzed to present the potential of mangrove ecosystem, the ecological suitability, and the carrying capacity then continued with SWOT (Strengths, Weaknesses, Opportunities, and Threats) analysis. Results showed that mangrove diversity in LK consist of fifteen species which Rhizophora apiculata and Avicennia lanata dominated the area, where mangroves in SN found seven species dominated by R. apiculata and A. officinalis. Based on the suitability level of mangrove ecosystem for ecotourism development, LK and SN were categorized as suitable and conditionally suitable, respectively. The carrying capacity of mangrove ecotourism for LK and SN were 36 and 36 people/day respectively. SWOT analysis revealed that both locations of eco-tourism have a potential eco-tourism attraction, high mangrove biodiversity, possible human resources, and real people’s perception on the importance of mangrove conservation, and relatively easy access. The study present suggested that mangrove ecotourism is a sustainable form of land use, to contributing the environmental protection and providing socio-economic benefits to the local people through indirect values of the natural resources.

ECOS: a configurable, multi-terabyte database supporting engineering and technical computing at Sizewell B

International Nuclear Information System (INIS)

Binns, F.; Fish, A.

1992-01-01

One of the three main classes of computing support systems is concerned with the technical and engineering aspects of Sizewell-B power station. These aspects are primarily concerned with engineering means to optimise plant use to maximise power output by increasing availability and efficiency. At Sizewell-B the Engineering Computer system (ECOS) will provide the necessary support facilities, and is described. ECOS is being used by the station commissioning team and for monitoring the state of some plant already in service. (Author)

Managing the BABAR Object Oriented Database

International Nuclear Information System (INIS)

Hasan, Adil

2002-01-01

The BaBar experiment stores its data in an Object Oriented federated database supplied by Objectivity/DB(tm). This database is currently 350TB in size and is expected to increase considerably as the experiment matures. Management of this database requires careful planning and specialized tools in order to make the data available to physicists in an efficient and timely manner. We discuss the operational issues and management tools that were developed during the previous run to deal with this vast quantity of data at SLAC

Software for radioactive wastes database

International Nuclear Information System (INIS)

Souza, Eros Viggiano de; Reis, Luiz Carlos Alves

1996-01-01

A radioactive waste database was implemented at CDTN in 1991. The objectives are to register and retrieve information about wastes ge in 1991. The objectives are to register and retrieve information about wastes generated and received at the Centre in order to improve the waste management. Since 1995, the database has being reviewed and a software has being developed aiming at processing information in graphical environment (Windows 95 and Windows NT), minimising the possibility of errors and making the users access more friendly. It was also envisaged to ease graphics and reports edition and to make this database available to other CNEN institutes and even to external organizations. (author)

Development of operation management database for research reactors

International Nuclear Information System (INIS)

Zhang Xinjun; Chen Wei; Yang Jun

2005-01-01

An Operation Database for Pulsed Reactor has been developed on the platform for Microsoft visual C++ 6.0. This database includes four function modules, fuel elements management, incident management, experiment management and file management. It is essential for reactor security and information management. (authors)

Fungal treatment: a prospective process for eco-friendly bioremediation of wastewater sludge

International Nuclear Information System (INIS)

Molla, A. H.; Fakhru'l-Razi, A.

2009-01-01

None of the conventional techniques is safe and environmental friendly for wastewaters/sludge disposal. A sustainable, safe and environmental friendly biological technique is a great apprehension to the relevant scientists. Since the fungal treatment was exercised to evaluate its potentially for sustainable bioseparation and bioremediation of wastewater. Bioseparation and bioremediation of wastewater sludge by fungal inoculation implied the decreasing of bio solids, total suspended solids (TSS), turbidity, chemical oxygen demand (COD) and specific resistance to filtration (SRF) of wastewater. (Author)

Panel: Eco-informatics and decision making managing our natural resources

Science.gov (United States)

Gushing, J.B.; Wilson, T.; Martin, F.; Schnase, J.; Spengler, S.; Sugarbaker, L.; Pardo, T.

2006-01-01

This panel responds to the December 2004 workshop on Eco-Informatics and Decision Making [1], which addressed how informatics tools can help with better management of natural resources and policy making. The workshop was jointly sponsored by the NSF, NBII, NASA, and EPA. Workshop participants recommended that informatics research in four IT areas be funded: modeling and simulation, data quality, information integration and ontologies, and social and human aspects. Additionally, they recommend that funding agencies provide infrastructure and some changes in funding habits to assure cycles of innovation in the domain were addressed. This panel brings issues raised in that workshop to the attention of digital government researchers.

The status of blood safety in ECO member states

Science.gov (United States)

Seighali, Fariba; Hosseini Divkolaye, Nasim S.; Koohi, Ebrahim; Pourfathollah, Ali A.; Rahmani, Ahmad M.

2015-01-01

Background Access to the information concerning blood safety is essential for managing problems and overcoming the challenges that are faced in any given region. Information on the availability and safety of blood in countries of the Economic Cooperation Organisation (ECO) is largely lacking. To address this problem, the Iranian Blood Transfusion Organisation, in collaboration with other ECO member states, initiated a research project in 2009 to collect, analyse and compare statistics on blood safety in the region. Materials and methods A modified and summarised version of the Global Database on Blood Safety (GDBS) questionnaire was used to collect data. The questionnaire was sent to all ten countries in the ECO region. The heads of the national transfusion services or focal points were requested to complete the form. Related literature and websites were also reviewed. Results Only three countries (Afghanistan, Iran and Turkey) completed the questionnaire, while other countries provided their available data on some parts of the questionnaire. The number of donations per year varied from 5 to 27/1,000 population. The rate of donors positive for human immunodeficiency virus ranged from 0.003% to 0.2%. The rate of donors positive for hepatitis C virus antibody varied from 0.05% to 3.9% while that of hepatitis B virus surface antigen ranged from 0.15% to 3.91% respectively. Discussion There is very clear diversity in blood transfusion services among ECO member states. Most countries in the region do not have a data-recording system. It is generally estimated that the need for blood is much higher than the supply in this region. Deficiencies in donor screening and a high prevalence of transfusion-transmitted infections are other important challenges. PMID:26192779

Content And Multimedia Database Management Systems

NARCIS (Netherlands)

de Vries, A.P.

1999-01-01

A database management system is a general-purpose software system that facilitates the processes of defining, constructing, and manipulating databases for various applications. The main characteristic of the ‘database approach’ is that it increases the value of data by its emphasis on data

ECO-INDUSTRIAL PARK - A TOOL FOR SUSTAINABLE DEVELOPMENT

Directory of Open Access Journals (Sweden)

BUGNAR NICOLETA GEORGETA

2013-07-01

relations between the firms are success factors within Eco-industrial networks. The successful cases – especially those in the USA or the Northern countries – have proved that Eco parks engage a multitude of entities, from regional/local authorities to non-governmental organizations; in these entities’ action the objectives and actions of the firms; management overlap with those of the community management

Djeen (Database for Joomla!'s Extensible Engine): a research information management system for flexible multi-technology project administration.

Science.gov (United States)

Stahl, Olivier; Duvergey, Hugo; Guille, Arnaud; Blondin, Fanny; Vecchio, Alexandre Del; Finetti, Pascal; Granjeaud, Samuel; Vigy, Oana; Bidaut, Ghislain

2013-06-06

With the advance of post-genomic technologies, the need for tools to manage large scale data in biology becomes more pressing. This involves annotating and storing data securely, as well as granting permissions flexibly with several technologies (all array types, flow cytometry, proteomics) for collaborative work and data sharing. This task is not easily achieved with most systems available today. We developed Djeen (Database for Joomla!'s Extensible Engine), a new Research Information Management System (RIMS) for collaborative projects. Djeen is a user-friendly application, designed to streamline data storage and annotation collaboratively. Its database model, kept simple, is compliant with most technologies and allows storing and managing of heterogeneous data with the same system. Advanced permissions are managed through different roles. Templates allow Minimum Information (MI) compliance. Djeen allows managing project associated with heterogeneous data types while enforcing annotation integrity and minimum information. Projects are managed within a hierarchy and user permissions are finely-grained for each project, user and group.Djeen Component source code (version 1.5.1) and installation documentation are available under CeCILL license from http://sourceforge.net/projects/djeen/files and supplementary material.

Data supporting the comparative life cycle assessment of different municipal solid waste management scenarios

Science.gov (United States)

Ali Rajaeifar, Mohammad; Tabatabaei, Meisam; Ghanavati, Hossein

2015-01-01

Environmental assessment of municipal solid waste (MSW) management scenarios would help to select eco-friendly scenarios. In this study, the inventory data in support of life cycle assessment of different MSW are presented. The scenarios were defined as: anaerobic digestion (AD, Sc-0), landfilling combined with composting (Sc-1), incineration (Sc-2), incineration combined with composting (Sc-3), and AD combined with incineration (Sc-4). The current article contains flowcharts of the different scenarios. Additionally, six supplementary files including inventory data on the different scenarios, data on the different damage assessment categories, normalization, and single scores are presented (Supplementary files 1–6). The analysis of the different scenarios revealed that the most eco-friendly scenario to be implemented in the future would be the combination of AD and incineration (Sc-4). PMID:26217743

Data supporting the comparative life cycle assessment of different municipal solid waste management scenarios

Directory of Open Access Journals (Sweden)

Mohammad Ali Rajaeifar

2015-06-01

Full Text Available Environmental assessment of municipal solid waste (MSW management scenarios would help to select eco-friendly scenarios. In this study, the inventory data in support of life cycle assessment of different MSW are presented. The scenarios were defined as: anaerobic digestion (AD, Sc-0, landfilling combined with composting (Sc-1, incineration (Sc-2, incineration combined with composting (Sc-3, and AD combined with incineration (Sc-4. The current article contains flowcharts of the different scenarios. Additionally, six supplementary files including inventory data on the different scenarios, data on the different damage assessment categories, normalization, and single scores are presented (Supplementary files 1–6. The analysis of the different scenarios revealed that the most eco-friendly scenario to be implemented in the future would be the combination of AD and incineration (Sc-4.

[The future of clinical laboratory database management system].

Science.gov (United States)

Kambe, M; Imidy, D; Matsubara, A; Sugimoto, Y

1999-09-01

To assess the present status of the clinical laboratory database management system, the difference between the Clinical Laboratory Information System and Clinical Laboratory System was explained in this study. Although three kinds of database management systems (DBMS) were shown including the relational model, tree model and network model, the relational model was found to be the best DBMS for the clinical laboratory database based on our experience and developments of some clinical laboratory expert systems. As a future clinical laboratory database management system, the IC card system connected to an automatic chemical analyzer was proposed for personal health data management and a microscope/video system was proposed for dynamic data management of leukocytes or bacteria.

Shedding Light on Eco-Innovation in Tourism: A Critical Analysis

Directory of Open Access Journals (Sweden)

Maria-del-Mar Alonso-Almeida

2016-12-01

Full Text Available The recent global increase in the competitiveness of tourism has made the implementation of eco-innovations a differentiating element among both the destinations and companies in the sector, with quality management and contribution to sustainable development being increasingly valued. However, the eco-innovations that have been developed and implemented in tourist industries have rarely been studied. In this study, the eco-innovations that have been developed and implemented by 57 tourism businesses worldwide are analysed. The identified eco-innovations are classified by using different qualitative methodologies. The obtained results shed light on the limited development of eco-innovations in the tourism industry and the industry focuses mainly on product eco-innovations. Several examples by the tourist sub-industry and types of eco-innovation are analysed. Furthermore, this study provides practical information about measures that both businesses and governmental organisations can adopt to promote eco-innovation in the sector.

Ascorbic Acid-Assisted Eco-friendly Synthesis of NiCo2O4 Nanoparticles as an Anode Material for High-Performance Lithium-Ion Batteries

Science.gov (United States)

Karunakaran, Gopalu; Maduraiveeran, Govindhan; Kolesnikov, Evgeny; Balasingam, Suresh Kannan; Viktorovich, Lysov Dmitry; Ilinyh, Igor; Gorshenkov, Mikhail V.; Sasidharan, Manickam; Kuznetsov, Denis; Kundu, Manab

2018-05-01

We have synthesized NiCo2O4 nanoparticles (NCO NPs) using an ascorbic acid-assisted co-precipitation method for the first time. When NCO NPs are used as an anode material for lithium-ion batteries, the cell exhibits superior lithium storage properties, such as high capacity (700 mA h g-1 after 300 cycles at 200 mA g-1), excellent rate capabilities (applied current density range 100-1200 mA g-1), and impressive cycling stability (at 1200 mA g-1 up to 650 cycles). The enhanced electrochemical properties of NCO NPs are due to the nanometer dimensions which not only offers a smooth charge-transport pathway and short diffusion paths of the lithium ions but also adequate spaces for volume expansion during Li storage. Hence, this eco-friendly synthesis approach will provide a new strategy for the synthesis of various nanostructured metal oxide compounds, for energy conversion and storage systems applications.

Formulation of an alginate-vineyard pruning waste composite as a new eco-friendly adsorbent to remove micronutrients from agroindustrial effluents.

Science.gov (United States)

Vecino, X; Devesa-Rey, R; Moldes, A B; Cruz, J M

2014-09-01

The cellulosic fraction of vineyard pruning waste (free of hemicellulosic sugars) was entrapped in calcium alginate beads and evaluated as an eco-friendly adsorbent for the removal of different nutrients and micronutrients (Mg, P, Zn, K, N-NH4, SO4, TN, TC and PO4) from an agroindustrial effluent (winery wastewater). Batch adsorption studies were performed by varying the amounts of cellulosic adsorbent (0.5-2%), sodium alginate (1-5%) and calcium chloride (0.05-0.9M) included in the biocomposite. The optimal formulation of the adsorbent composite varied depending on the target contaminant. Thus, for the adsorption of cationic contaminants (Mg, Zn, K, N-NH4 and TN), the best mixture comprised 5% sodium alginate, 0.05M calcium chloride and 0.5% cellulosic vineyard pruning waste, whereas for removal of anionic compounds (P, SO4 and PO4), the optimal mixture comprised 1% sodium alginate, 0.9M calcium chloride and 0.5% cellulosic vineyard pruning waste. To remove TC from the winery wastewater, the optimal mixture comprised 3% of sodium alginate, 0.475M calcium chloride and 0.5% cellulosic vineyard pruning waste. Copyright © 2014 Elsevier Ltd. All rights reserved.

Transesterification of palm oil to biodiesel using Br(φ)nsted acidic ionic liquid as high-efficient and eco-friendly catalyst

Institute of Scientific and Technical Information of China (English)

Yaoyao Feng; Ting Qiu; Jinbei Yang; Ling Li; Xiaoda Wang; Hongxing Wang

2017-01-01

The transesterification of palm oil and methanol catalyzed by Br(φ)nsted acidic ionic liquids was investigated.Four eco-friendly Br(φ)nsted acidic ionic liquids were prepared and their structures were characterized by NMR,FT-IR and TG-DTG.The results demonstrated that [CyN1,1PrSO3H][p-TSA] was more efficient than the other ionic liquids and chosen as catalyst for further research.The influences of various reaction parameters on the conversion of palm oil to biodiesel were performed,and the orthogonal test was investigated to seek the optimum reaction conditions,which were illustrated as follows:methanol to oil mole ratio of 24∶1,catalyst dosage of 3.0 wt％ of oil,reaction temperature of 120 ℃,reaction time of 150 min,and the biodiesel yield achieved 98.4％.In addition,kinetic study was established for the conversion process,with activation energy and preexponential factor of 122.93 kJ·mol-1 and 1.83 × 1015,respectively.Meanwhile,seven-time recycling runs of ionic liquid were completed with ignorable loss of its catalyst activity.The refined biodiesel met the biodiesel standard EN 14214.

Gender sensitive education in watershed management to support environmental friendly city

Science.gov (United States)

Asteria, D.; Budidarmono; Herdiansyah, H.; Ni’mah, N. L.

2018-03-01

This study is about gender-sensitive perspective in watershed management education program as one of capacity building for citizens in watershed management with community-based strategy to support environmental friendly cities and security for women from flood disasters. Involving women and increasing women’s active participation in sustainable watershed management is essential in urban area. In global warming and climate change situations, city management should be integrated between social aspect and environmental planning. This study used mix method (concurrent embedded type, with quantitative as primary method) with research type is descriptive-explanatory. The result of this study is education strategies with gender approaches and affirmative action through emancipation approach and local knowledge from women’s experiences can increase women’s participation. Women’s empowerment efforts need integrated intervention and collaboration from government, NGO, and other stakeholders to optimize women’s role in watershed management for support environmental friendly city. The implication of this study is an educational strategy on watershed conservation with gender perspective to offer social engineering alternatives for decision makers to policy of sustainable watershed management in urban area related to flood mitigation efforts.

FishPathogens.eu/vhsv: a user-friendly viral haemorrhagic septicaemia virus isolate and sequence database

DEFF Research Database (Denmark)

Jonstrup, Søren Peter; Gray, Tanya; Kahns, Søren

2009-01-01

A database has been created, http://www.Fish Pathogens.eu, with the aim of providing a single repository for collating important information on significant pathogens of aquaculture, relevant to their control and management. This database will be developed, maintained and managed as part of the Eu......A database has been created, http://www.Fish Pathogens.eu, with the aim of providing a single repository for collating important information on significant pathogens of aquaculture, relevant to their control and management. This database will be developed, maintained and managed as part...... of the European Community Reference Laboratory for Fish Diseases function. This concept has been initially developed for viral haemorrhagic septicaemia virus and will be extended in future to include information on other significant aquaculture pathogens. Information included for each isolate comprises sequence...... to obtain data from any selected part of the genome of interest. The output of the sequence search can be readily retrieved as a FASTA file ready to be imported into a sequence alignment tool of choice, facilitating further molecular epidemiological study....

An eco-friendly approach for sodium chloride free cotton dyeing

International Nuclear Information System (INIS)

Umer, T.

2014-01-01

Present study was conducted with an aim to develop an environmental friendly method of dyeing cotton as an alternative to standard reactive dyeing process that requires high level of salt. When dyeing was carried out in the absence of sodium chloride (NaCl), an extremely lighter depth of shade was experienced, and hence this particular research was focused on the reduction of the total colour difference (AE) to a minimum level. Instead of adding any other chemical or any additional process like cationization, salt-free reactive dyeing was carried out by varying three common process parameters (dyes, alkali, and process time) to achieve required depth of shade. The results obtained were compared with those of conventionally dyed fabrics in terms of depth of shade (AL), total colour difference (AE), washing fastness, and rubbing fastness. The results were found to be promising and comparable to those dyed with using NaCl. Moreover, the investigated method showed a significant reduction of Total Dissolved Solids (TDS) and Electrical Conductivity (EC) in the wastewater, and thus proved to be an environment friendly process. (author)

De-MA: a web Database for electron Microprobe Analyses to assist EMP lab manager and users

Science.gov (United States)

Allaz, J. M.

2012-12-01

Lab managers and users of electron microprobe (EMP) facilities require comprehensive, yet flexible documentation structures, as well as an efficient scheduling mechanism. A single on-line database system for managing reservations, and providing information on standards, quantitative and qualitative setups (element mapping, etc.), and X-ray data has been developed for this purpose. This system is particularly useful in multi-user facilities where experience ranges from beginners to the highly experienced. New users and occasional facility users will find these tools extremely useful in developing and maintaining high quality, reproducible, and efficient analyses. This user-friendly database is available through the web, and uses MySQL as a database and PHP/HTML as script language (dynamic website). The database includes several tables for standards information, X-ray lines, X-ray element mapping, PHA, element setups, and agenda. It is configurable for up to five different EMPs in a single lab, each of them having up to five spectrometers and as many diffraction crystals as required. The installation should be done on a web server supporting PHP/MySQL, although installation on a personal computer is possible using third-party freeware to create a local Apache server, and to enable PHP/MySQL. Since it is web-based, any user outside the EMP lab can access this database anytime through any web browser and on any operating system. The access can be secured using a general password protection (e.g. htaccess). The web interface consists of 6 main menus. (1) "Standards" lists standards defined in the database, and displays detailed information on each (e.g. material type, name, reference, comments, and analyses). Images such as EDS spectra or BSE can be associated with a standard. (2) "Analyses" lists typical setups to use for quantitative analyses, allows calculation of mineral composition based on a mineral formula, or calculation of mineral formula based on a fixed

An enhanced photocatalytic response of nanometric TiO2 wrapping of Au nanoparticles for eco-friendly water applications.

Science.gov (United States)

Scuderi, Viviana; Impellizzeri, Giuliana; Romano, Lucia; Scuderi, Mario; Brundo, Maria V; Bergum, Kristin; Zimbone, Massimo; Sanz, Ruy; Buccheri, Maria A; Simone, Francesca; Nicotra, Giuseppe; Svensson, Bengt G; Grimaldi, Maria G; Privitera, Vittorio

2014-10-07

We propose a ground-breaking approach by an upside-down vision of the Au/TiO2 nano-system in order to obtain an enhanced photocatalytic response. The system was synthesized by wrapping Au nanoparticles (∼8 nm mean diameter) with a thin layer of TiO2 (∼4 nm thick). The novel idea of embedding Au nanoparticles with titanium dioxide takes advantage of the presence of metal nanoparticles, in terms of electron trapping, without losing any of the TiO2 exposed surface, so as to favor the photocatalytic performance of titanium dioxide. A complete structural characterization was made by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The remarkable photocatalytic performance together with the stability of the nano-system was demonstrated by degradation of the methylene blue dye in water. The non-toxicity of the nano-system was established by testing the effect of the material on the reproductive cycle of Mytilus galloprovincialis in an aquatic environment. The originally synthesized material was also compared to conventional TiO2 with Au nanoparticles on top. The latter system showed a dispersion of Au nanoparticles in the liquid environment, due to their instability in the aqueous solution that clearly represents an environmental contamination issue. Thus, the results show that nanometric TiO2 wrapping of Au nanoparticles has great potential in eco-friendly water/wastewater purification.

An eco-friendly molecularly imprinted fluorescence composite material based on carbon dots for fluorescent detection of 4-nitrophenol

International Nuclear Information System (INIS)

Hao, Tongfan; Wei, Xiao; Nie, Yijing; Zhou, Zhiping; Xu, Yeqing; Yan, Yongsheng

2016-01-01

We on report an eco-friendly molecularly imprinted material based on carbon dots (C-dots) via a facile and efficient sol–gel polymerization for selective fluorescence detection of 4-nitrophenol (4-NP). The amino-modified C-dots were firstly synthesized by a hydrothermal process using citric acid as the carbon source and poly(ethyleneimine) as the surface modifier, and then after a sol–gel molecular imprinting process, the molecularly imprinted fluorescence material was obtained. The material (MIP-C-dots) showed strong fluorescence from C-dots and high selectivity due to the presence of a molecular imprint. After the detection conditions were optimized, the relative fluorescence intensity (F_0/F) of MIP-C-dots presented a good linearity with 4-NP concentrations in the linear range of 0.2 − 50 μmol L"-"1 with a detection limit (3σ/k) of 0.06 μmol L"-"1. In addition, the correlation coefficient was 0.9978 and the imprinting factor was 2.76. The method was applicable to the determination of trace 4-NP in Yangtze River water samples and good recoveries from 92.6–107.3 % were obtained. The present study provides a general strategy to fabricate materials based on C-dots with good fluorescence property for selective fluorescence detection of organic pollutants. (author)

Characterization and formulation of a new eco-friendly hydraulic binder based on combination of inorganic and organic admixtures

Directory of Open Access Journals (Sweden)

Khudhair M.H.R.

2018-01-01

Full Text Available This work aims to valorize a mineral and natural resources such as the Limestone Fillers (F-Lime and the Natural Pozzolan (PN by incorporating them into the formulation matrix of cement or concrete. In order to minimize the CO2 emissions into the atmosphere, to reduce the energy and raw materials consumption and as well as, to improve the physical and mechanical properties in fresh cement paste and of mortar or concrete in the hardened state. In this present manuscript, we substituted the clinker by the combination between the F-Lime and NP at 40% by weight of cement with steps of 5% with the admixture of superplasticizers. The influences of the incorporation of these additions on physical and mechanical properties of mortar or concrete in the fresh cement paste and hardened state were evaluated. The obtained results by different formulations elaborated to show that the replacement a part of clinker by the mixing of F-Lime and PN has produced a new hydraulic binder eco-friendly and durable with improved physicochemical, physical and mechanical properties. These results show that we have succeeded to manufacture, characteristic and formulated of new ecofriendly hydraulic binder and sustainable with improved physical, chemical, and mechanical properties while minimizing greenhouse gas emissions on one hand and the reducing the energy raw materials consumption on the other hand.

Research Issues on Customer-Oriented and Eco-friendly Networks for Healthy Fashionable Goods

OpenAIRE

Fornasiero , Rosanna; Chiodi , Andrea; Carpanzano , Emanuele; Carneiro , Luis

2010-01-01

International audience; Needs and expectations of specific target groups - such as elderly, obese, disabled, or diabetic persons- are arising as challenging opportunities for European companies which are asked to supply small series of functional and fashionable goods of high quality, affordable price and eco-compatible. In order to design, develop, produce and distribute such products, a new framework and related components of collaborative networking need to be developed, enabling the produ...

The A.P.I. ECO Project. Pilot demonstration project in small and medium enterprises implementing the eco-management and audit scheme; Progetto A.P.I.ECO. Azioni pilota in favore dell`attuazione nelle piccole e medie industrie del sistema comunitario di ecogestione e audit

Energy Technology Data Exchange (ETDEWEB)

Brunetti, Nicola [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Ambiente; Casciani, Michele; Galotti, Giorgio; Peruzzi, Augusto [IGEAM Srl, Rome (Italy)

1997-09-01

During a 18 months period in 1995/1996 a pilot demonstration project, on behalf of the Commission the European Communities, was undertaken to investigate the experience of 8 small and medium-sized enterprises (SMEs), in Lazio Region, implementing the Eco-management and audit scheme (EMAS). The promoters of A.P.I.ECO project are: IGEAM Srl (environmental consulting company); ENEA (the National Agency for New Technology, Energy and the Environment) and FEDERLAZIO (Regional SMEs association). The principal direct targets of the project have been: backing up 8 SMEs of different sectors and characteristics, by conducting a deep initial environmental review and implementing the EMAS, with the goal of leading them to the environmental certification according to the 1836/93 EC Regulation; preparation and utilization of guidelines, procedures and protocols for the several steps of EMAS; promoting and divulgating principles and techniques of environmental management and eco-auditing, as much as possible, especially on a regional scale via SMEs association; training and opportunity of a practical experience of environmental analysis and auditing in SMEs to a large group of technicians of different backgrounds in the environmental field. A step by step procedure program was utilized for implementing EMAS in the 8 SMEs: environmental review; policy, objectives and programmes; environmental management system (Organization and Personnel, Environmental Management Manual, Operating Systems and Controls and Register of Environmental Effects and Regulation, Environmental Audit); Environmental statement. The project has been completed with the drafting of guideline for environmental statement for each of the 8 companies and the disseminating the results achieved.

Sustainable water management under future uncertainty with eco-engineering decision scaling

Science.gov (United States)

Poff, N. Leroy; Brown, Casey M.; Grantham, Theodore E.; Matthews, John H.; Palmer, Margaret A.; Spence, Caitlin M.; Wilby, Robert L.; Haasnoot, Marjolijn; Mendoza, Guillermo F.; Dominique, Kathleen C.; Baeza, Andres

2016-01-01

Managing freshwater resources sustainably under future climatic and hydrological uncertainty poses novel challenges. Rehabilitation of ageing infrastructure and construction of new dams are widely viewed as solutions to diminish climate risk, but attaining the broad goal of freshwater sustainability will require expansion of the prevailing water resources management paradigm beyond narrow economic criteria to include socially valued ecosystem functions and services. We introduce a new decision framework, eco-engineering decision scaling (EEDS), that explicitly and quantitatively explores trade-offs in stakeholder-defined engineering and ecological performance metrics across a range of possible management actions under unknown future hydrological and climate states. We illustrate its potential application through a hypothetical case study of the Iowa River, USA. EEDS holds promise as a powerful framework for operationalizing freshwater sustainability under future hydrological uncertainty by fostering collaboration across historically conflicting perspectives of water resource engineering and river conservation ecology to design and operate water infrastructure for social and environmental benefits.

Sustainable water management under future uncertainty with eco-engineering decision scaling

Science.gov (United States)

Poff, N LeRoy; Brown, Casey M; Grantham, Theodore E.; Matthews, John H; Palmer, Margaret A.; Spence, Caitlin M; Wilby, Robert L.; Haasnoot, Marjolijn; Mendoza, Guillermo F; Dominique, Kathleen C; Baeza, Andres

2015-01-01

Managing freshwater resources sustainably under future climatic and hydrological uncertainty poses novel challenges. Rehabilitation of ageing infrastructure and construction of new dams are widely viewed as solutions to diminish climate risk, but attaining the broad goal of freshwater sustainability will require expansion of the prevailing water resources management paradigm beyond narrow economic criteria to include socially valued ecosystem functions and services. We introduce a new decision framework, eco-engineering decision scaling (EEDS), that explicitly and quantitatively explores trade-offs in stakeholder-defined engineering and ecological performance metrics across a range of possible management actions under unknown future hydrological and climate states. We illustrate its potential application through a hypothetical case study of the Iowa River, USA. EEDS holds promise as a powerful framework for operationalizing freshwater sustainability under future hydrological uncertainty by fostering collaboration across historically conflicting perspectives of water resource engineering and river conservation ecology to design and operate water infrastructure for social and environmental benefits.

PlantDB – a versatile database for managing plant research

Directory of Open Access Journals (Sweden)

Gruissem Wilhelm

2008-01-01

Full Text Available Abstract Background Research in plant science laboratories often involves usage of many different species, cultivars, ecotypes, mutants, alleles or transgenic lines. This creates a great challenge to keep track of the identity of experimental plants and stored samples or seeds. Results Here, we describe PlantDB – a Microsoft® Office Access database – with a user-friendly front-end for managing information relevant for experimental plants. PlantDB can hold information about plants of different species, cultivars or genetic composition. Introduction of a concise identifier system allows easy generation of pedigree trees. In addition, all information about any experimental plant – from growth conditions and dates over extracted samples such as RNA to files containing images of the plants – can be linked unequivocally. Conclusion We have been using PlantDB for several years in our laboratory and found that it greatly facilitates access to relevant information.

[Establishement for regional pelvic trauma database in Hunan Province].

Science.gov (United States)

Cheng, Liang; Zhu, Yong; Long, Haitao; Yang, Junxiao; Sun, Buhua; Li, Kanghua

2017-04-28

To establish a database for pelvic trauma in Hunan Province, and to start the work of multicenter pelvic trauma registry.
 Methods: To establish the database, literatures relevant to pelvic trauma were screened, the experiences from the established trauma database in China and abroad were learned, and the actual situations for pelvic trauma rescue in Hunan Province were considered. The database for pelvic trauma was established based on the PostgreSQL and the advanced programming language Java 1.6.
 Results: The complex procedure for pelvic trauma rescue was described structurally. The contents for the database included general patient information, injurious condition, prehospital rescue, conditions in admission, treatment in hospital, status on discharge, diagnosis, classification, complication, trauma scoring and therapeutic effect. The database can be accessed through the internet by browser/servicer. The functions for the database include patient information management, data export, history query, progress report, video-image management and personal information management.
 Conclusion: The database with whole life cycle pelvic trauma is successfully established for the first time in China. It is scientific, functional, practical, and user-friendly.

Development of database management system for monitoring of radiation workers for actinides

International Nuclear Information System (INIS)

Kalyane, G.N.; Mishra, L.; Nadar, M.Y.; Singh, I.S.; Rao, D.D.

2012-01-01

Annually around 500 radiation workers are monitored for estimation of lung activities and internal dose due to Pu/Am and U from various divisions of Bhabha Atomic Research Centre (Trombay) and from PREFRE and A3F facilities (Tarapur) in lung counting laboratory located at Bhabha Atomic Research Centre hospital under Routine and Special monitoring program. A 20 cm diameter phoswich and an array of HPGe detector were used for this purpose. In case of positive contamination, workers are followed up and monitored using both the detection systems in different geometries. Management of this huge data becomes difficult and therefore an easily retrievable database system containing all the relevant data of the monitored radiation workers. Materials and methods: The database management system comprises of three main modules integrated together: 1) Apache server installed on a Windows (XP) platform (Apache version 2.2.17) 2) MySQL database management system (MySQL version 5.5.8) 3) PHP (Preformatted Hypertext) programming language (PHP version 5.3.5). All the 3 modules work together seamlessly as a single software program. The front end user interaction is through an user friendly and interactive local web page where internet connection is not required. This front page has hyperlinks to many other pages, which have different utilities for the user. The user has to log in using username and password. Results and Conclusions: Database management system is used for entering, updating and management of lung monitoring data of radiation workers, The program is having following utilities: bio-data entry of new subjects, editing of bio-data of old subjects (only one subject at a time), entry of counting data of that day's lung monitoring, retrieval of old records based on a number of parameters and filters like date of counting, employee number, division, counts fulfilling a given criterion, etc. and calculation of MEQ CWT (Muscle Equivalent Chest Wall Thickness), energy

EcoM2 web portal: Collecting empirical data and supporting companies' ecodesign implementation and management

DEFF Research Database (Denmark)

Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.; Rozenfeld, Henrique

2013-01-01

to that a comprehensive framework has been developed, with the aim of ensuring systematic management, implementation and continuous improvement of the ecodesign process. The framework, called Ecodesign Maturity Model (EcoM2), enables the diagnosis of the company’s ecodesign maturity profile; the identification...... of strengths and limitations; and the establishment of strategic roadmaps for improved ecodesign implementation. This paper describes the development of the EcoM2 web portal, which will allow for the framework to be tested on greater numbers of companies and at the same time to provide a quick diagnosis......Despite the recognition of the potential benefits of ecodesign, a promising approach to integrate environmental concerns into the product development process, its application has failed to reach large numbers of companies and sectors worldwide due to managerial difficulties. In response...

Reexamining Operating System Support for Database Management

OpenAIRE

Vasil, Tim

2003-01-01

In 1981, Michael Stonebraker [21] observed that database management systems written for commodity operating systems could not effectively take advantage of key operating system services, such as buffer pool management and process scheduling, due to expensive overhead and lack of customizability. The “not quite right” fit between these kernel services and the demands of database systems forced database designers to work around such limitations or re-implement some kernel functionality in user ...

FishPathogens.eu/vhsv: A user-friendly Viral Haemorrhagic Septicaemia Virus (VHSV) isolate and sequence database

DEFF Research Database (Denmark)

Jonstrup, Søren Peter; Gray, Tanya; Kahns, Søren

A database has been created, www.FishPathogens.eu, with the aim of providing a single repository for collating important information on significant pathogens of aquaculture, relevant to their control and management. This database will be developed, maintained and managed as part of the European...

Development of a user friendly interface for database querying in natural language by using concepts and means related to artificial intelligence

International Nuclear Information System (INIS)

Pujo, Pascal

1989-01-01

This research thesis reports the development of a user-friendly interface in natural language for querying a relational database. The developed system differs from usual approaches for its integrated architecture as the relational model management is totally controlled by the interface. The author first addresses the way to store data in order to make them accessible through an interface in natural language, and more precisely to store data with an organisation which would result in the less possible constraints in query formulation. The author then briefly presents techniques related to automatic processing in natural language, and discusses the implications of a better user-friendliness and for error processing. The next part reports the study of the developed interface: selection of data processing tools, interface development, data management at the interface level, information input by the user. The last chapter proposes an overview of possible evolutions for the interface: use of deductive functionalities, use of an extensional base and of an intentional base to deduce facts from knowledge stores in the extensional base, and handling of complex objects [fr

Djeen (Database for Joomla!’s Extensible Engine): a research information management system for flexible multi-technology project administration

Science.gov (United States)

2013-01-01

Background With the advance of post-genomic technologies, the need for tools to manage large scale data in biology becomes more pressing. This involves annotating and storing data securely, as well as granting permissions flexibly with several technologies (all array types, flow cytometry, proteomics) for collaborative work and data sharing. This task is not easily achieved with most systems available today. Findings We developed Djeen (Database for Joomla!’s Extensible Engine), a new Research Information Management System (RIMS) for collaborative projects. Djeen is a user-friendly application, designed to streamline data storage and annotation collaboratively. Its database model, kept simple, is compliant with most technologies and allows storing and managing of heterogeneous data with the same system. Advanced permissions are managed through different roles. Templates allow Minimum Information (MI) compliance. Conclusion Djeen allows managing project associated with heterogeneous data types while enforcing annotation integrity and minimum information. Projects are managed within a hierarchy and user permissions are finely-grained for each project, user and group. Djeen Component source code (version 1.5.1) and installation documentation are available under CeCILL license from http://sourceforge.net/projects/djeen/files and supplementary material. PMID:23742665

Study on managing EPICS database using ORACLE

International Nuclear Information System (INIS)

Liu Shu; Wang Chunhong; Zhao Jijiu

2007-01-01

EPICS is used as a development toolkit of BEPCII control system. The core of EPICS is a distributed database residing in front-end machines. The distributed database is usually created by tools such as VDCT and text editor in the host, then loaded to front-end target IOCs through the network. In BEPCII control system there are about 20,000 signals, which are distributed in more than 20 IOCs. All the databases are developed by device control engineers using VDCT or text editor. There's no uniform tools providing transparent management. The paper firstly presents the current status on EPICS database management issues in many labs. Secondly, it studies EPICS database and the interface between ORACLE and EPICS database. finally, it introduces the software development and application is BEPCII control system. (authors)

EXAMINING THE INFLUENCE OF GREEN MANAGEMENT ON OPERATION FUNCTIONS: CASE OF A BUSINESS

OpenAIRE

Uygur, Akyay; Musluk, Berat Yasin; Ilbey, Nail

2015-01-01

Green management is a paradigm that includes improving environmental awareness, using energy resources and eco-friendly technologies, reuse of wastes, and recycling activities starting from production activities of businesses to packaging and delivering to consumers. Businesses have now become aware that environment must be preserved and tended towards green management as a result of destructed and demolished environment, and the effect of hunger, scarcity, global problems despite developed s...

Eco-innovations in the functioning of companies.

Science.gov (United States)

Ociepa-Kubicka, A; Pachura, P

2017-07-01

The development of entrepreneurships in the 21st century cannot occur without taking care of the natural environment. The article presents issues related to eco-innovation. Despite the opportunities offered by eco-innovations, implementation of such initiatives remains to lead to various difficulties. They vary across countries and sectors. The insufficient number of enterprises in Poland and other European countries implement adequate level of eco-innovations. The main aim of this paper is to indicate the causes of this status and activities aimed to develop eco-innovativeness. The benefits and risks connected with implementation of innovative products and technologies were also discussed. Furthermore, the advantages of and barriers to their implementation into companies were analysed. The entrepreneurs from the least eco-innovative countries emphasize serious barriers, including uncertain demand from the market, uncertain return on investment or too long a payback period for eco-innovation, lack of funds within the enterprise, insufficient access to existing subsidies and fiscal incentive. They are especially afraid of the financial risks, which raises uncertainty and leads to refraining from innovative initiatives. The possibilities were indicated for the entrepreneurs who face problems with the implementation of innovative solutions. Particular attention was paid to the European Union activities for the development of eco-innovations. Numerous programs supporting their implementation were indicated. The article also presents examples of eco-innovation in water and sewage enterprises. It was emphasized that planning of eco-innovative solutions should be based on comprehensive information about actual benefits and possibility of threats to the environment which can be caused by implementation of eco-innovations. The study presents the example of threats resulting from different methods of sewage sludge management. Copyright © 2017 Elsevier Inc. All rights

PREFACE: International Symposium on Materials Science and Innovation for Sustainable Society - Eco-Materials and Eco-Innovation for Global Sustainability - The 21st Iketani Conference 2011

Science.gov (United States)

Takahashi, Yasuo

2012-08-01

Conference logo The 21st century has been called the century of environmental revolution. Green innovations and environmentally friendly production systems based on physics, chemistry, materials science, and electronic engineering will be indispensable for ensuring renewable energy and establishing a sustainable society. In particular, production design, materials processing, and fabrication technologies such as welding and joining will be very important components of such green innovations. For these reasons, the International Symposium on Materials Science and Innovation for Sustainable Society - eco-materials and eco-innovation for global sustainability - (ECO-MATES 2011) was organized by the Joining and Welding Research Institute (JWRI) and the Center of Environmental Innovation Design for Sustainability (CEIDS), Osaka University. ECO-MATES 2011 was held at Hotel Hankyu Expo Park, Osaka, Japan from 28-30 November 2011. 435 participants from 20 countries around the world attended the symposium. 149 oral presentations including 60 invited talks and 160 posters were presented at the symposium to discuss the latest research and developments in green innovations in relation to environmental issues. The topics of the symposium covered all environmentally related fields including renewable energy, energy-materials, environment and resources, waste and biomass, power electronics, semiconductor, rare-earth metals, functional materials, organic electronics materials, electronics packaging, smart processing, joining and welding, eco-efficient processes, and green applied physics and chemistry. Therefore, 55 full papers concerning green innovations and environmentally benign production were selected and approved by the editorial board and the program committee of ECO-MATES 2011. All papers were accepted through peer review processes. I believe that all the papers have many informative contents. On behalf of the steering committee of the symposium, I would like to express

Wireless Sensor Networks Database: Data Management and Implementation

Directory of Open Access Journals (Sweden)

Ping Liu

2014-04-01

Full Text Available As the core application of wireless sensor network technology, Data management and processing have become the research hotspot in the new database. This article studied mainly data management in wireless sensor networks, in connection with the characteristics of the data in wireless sensor networks, discussed wireless sensor network data query, integrating technology in-depth, proposed a mobile database structure based on wireless sensor network and carried out overall design and implementation for the data management system. In order to achieve the communication rules of above routing trees, network manager uses a simple maintenance algorithm of routing trees. Design ordinary node end, server end in mobile database at gathering nodes and mobile client end that can implement the system, focus on designing query manager, storage modules and synchronous module at server end in mobile database at gathering nodes.

Eco-friendly spray coating of organic solar cells through water-based nanoparticles ink (Presentation Recording)

Science.gov (United States)

Stryckers, Jeroen; D'Olieslaeger, Lien; Manca, Jean; Ethirajan, Anitha; Deferme, Wim

2015-09-01

Ultrasonic spray coating is currently proven to be a reliable, flexible and cost efficient fabrication method for printed electronics [1-2]. Ultrasonic nozzles are by design especially well-suited to deposit nano-suspension dispersions. Due to the ultrasonic vibration of the nozzle, droplets having a median diameter of 20 μm are created in a homogeneous droplet cloud and directed towards the substrate. When one prepares an ink having the right wetting properties, thin and homogeneous layers, fully covering the surface, can be achieved. Together with conjugated polymer nanoparticles (NPs), emerging as a new class of nanomaterials, [3] it opens possibilities towards eco-friendly roll-to-roll processing of state-of-the-art organic bulk heterojunction solar cells. A ultrasonic spray coater was used to print the conjugated polymer NP layers under different conditions. A first optimization of the spray coater settings (flow rate, spray speed and temperature) and the ink formulation (water and co-solvent mixture and NP content) was performed for polystyrene particles dissolved in a water-ethanol mixture. As a next step, the low bandgap donor polymer poly[9-(1-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-benzothiadiazole-4,7-diyl-2,5-thiophene-diyl] (PCDTBT) [4] and the fullerene acceptor phenyl-C71-butyric acid methyl ester (PCBM[70]) were combined in a water-based blend NP dispersion which was prepared using the mini-emulsion technique. [5,6] Optical Microscopy, profilometry and Scanning Electron Microscopy (SEM) are performed to study the roughness, surface structure, thickness and coverage of the spray coated layers. Finally the printed NP layers are integrated in organic bulk heterojunction solar cells and compared to spin coated reference devices.

Eco-efficient waste glass recycling: Integrated waste management and green product development through LCA

International Nuclear Information System (INIS)

Blengini, Gian Andrea; Busto, Mirko; Fantoni, Moris; Fino, Debora

2012-01-01

Highlights: ► A new eco-efficient recycling route for post-consumer waste glass was implemented. ► Integrated waste management and industrial production are crucial to green products. ► Most of the waste glass rejects are sent back to the glass industry. ► Recovered co-products give more environmental gains than does avoided landfill. ► Energy intensive recycling must be limited to waste that cannot be closed-loop recycled. - Abstract: As part of the EU Life + NOVEDI project, a new eco-efficient recycling route has been implemented to maximise resources and energy recovery from post-consumer waste glass, through integrated waste management and industrial production. Life cycle assessment (LCA) has been used to identify engineering solutions to sustainability during the development of green building products. The new process and the related LCA are framed within a meaningful case of industrial symbiosis, where multiple waste streams are utilised in a multi-output industrial process. The input is a mix of rejected waste glass from conventional container glass recycling and waste special glass such as monitor glass, bulbs and glass fibres. The green building product is a recycled foam glass (RFG) to be used in high efficiency thermally insulating and lightweight concrete. The environmental gains have been contrasted against induced impacts and improvements have been proposed. Recovered co-products, such as glass fragments/powders, plastics and metals, correspond to environmental gains that are higher than those related to landfill avoidance, whereas the latter is cancelled due to increased transportation distances. In accordance to an eco-efficiency principle, it has been highlighted that recourse to highly energy intensive recycling should be limited to waste that cannot be closed-loop recycled.

Making biodiversity-friendly cocoa pay: combining yield, certification, and REDD for shade management.

Science.gov (United States)

Waldron, A; Justicia, R; Smith, L E

2015-03-01

The twin United Nations' Millennium Development Goals of biodiversity preservation and poverty reduction both strongly depend on actions in the tropics. In particular, traditional agroforestry could be critical to both biological conservation and human livelihoods in human-altered rainforest areas. However, traditional agroforestry is rapidly disappearing, because the system itself is economically precarious, and because the forest trees that shade traditional crops are now perceived to be overly detrimental to agricultural yield. Here, we show a case where the commonly used agroforestry shade metric, canopy cover, would indeed suggest complete removal of shade trees to maximize yield, with strongly negative biodiversity and climate implications. However, a yield over 50% higher was achievable if approximately 100 shade trees per hectare were planted in a spatially organized fashion, a win-win for biodiversity and the smallholder. The higher yield option was detected by optimizing simultaneously for canopy cover, and a second shade metric, neighboring tree density, which was designed to better capture the yield value of ecological services flowing from forest trees. Nevertheless, even a 50% yield increase may prove insufficient to stop farmers converting away from traditional agroforestry. To further increase agroforestry rents, we apply our results to the design of a sustainable certification (eco-labelling) scheme for cocoa-based products in a biodiversity hotspot, and consider their implications for the use of the United Nations REDD (reducing emissions from deforestation and forest degradation) program in agroforestry systems. Combining yield boost, certification, and REDD has the potential to incentivize eco-friendly agroforestry and lift smallholders out of poverty, simultaneously.

ASSESSMENT AND DESIGN FOR SUSTAINABLE GREEN SUPPLY CHAIN MANAGEMENT

OpenAIRE

Mangal Singh Sisodiya

2017-01-01

Green Supply Chain Management (GSCM) is one of the recent innovations for the enhancement of capabilities of Supply Chain Management. In this paper, we aim to study the various activities of the Supply Chain processes of the various Indian Manufacturing Industries i.e. both Small & Large Scale Industries and finds how much eco-friendly they are (i.e. how much % of the green factor are involved in their supply chain activities from the procurement of the raw material to the transportation of t...

Eco-marketing and eco-design of products

Directory of Open Access Journals (Sweden)

Filipović Jovan

2007-01-01

Full Text Available Environmental marketing (Eco-marketing, as a relatively new movement, emerged at the beginning of the 20th century, is in the growing phase of its development. Eco-labeling and other ways/types of eco-marketing are attracting more attention of consumers, since they are aware of the necessity of nature conservation and environmental protection. There has been a lot of misunderstanding and miss leadings in interpretation and substantiation of ecomarketing claims in previous period of time. One of the most concrete improvements in eco-marketing was appearance and establishment of ISO 14020 guidelines. ISO 14020 guidelines are integral part of ISO 14000 series of standards, which could be implemented in eco-marketing. At the same time, development of "green" products and marketing of "green" products, are direct positive contributions to resources reduction, environmental protection and sustainable economic development. Companies designing this kind of products can expect better position on the market, improvement of competitiveness, reduction of expenses (less raw materials, less waste, less harmful effects on the environment, raising corporate social responsibility, higher export.

A simple, rapid and eco friendly method for determination of uranium in geological samples of low silicate matrix by ICP-OES

International Nuclear Information System (INIS)

Hanuman, V.V.; Chakrapani, G.; Singh, A.K.

2013-01-01

A simple, rapid, cost effective and eco friendly decomposition and dissolution method is developed for the determination of uranium (U 3 O 8 ) by Inductively Coupled Plasma - Optical Emission Spectrometer (ICP-OES) in low silicate geological samples. The salts of Sodium di-hydrogen phosphate monohydrate and Sodium pyrophosphate deca hydrate are used in the ratio of 1:1 (phosphate flux) for the decomposition of low silicate matrix geological samples. Samples are decomposed by fusion with the phosphate flux after ignition and the dissolution is carried out using distilled water. If the samples contain >10% silica, they have been treated with little amount of (HF+HNO 3 ) prior to fusion with phosphate flux. These samples, are analysed by ICP-OES directly without any separation from the matrix. The spectral interferences of major matrix elements (Al, Ti, Fe, Mn, etc present in the sample) on uranium are studied and it is observed that their interferences are negligible, as dilution is required to bring uranium concentration into calibration range of instrument. This is the first time, the phosphate flux is used for decomposition of low silicate geological samples for uranium determination by ICP-OES

Low-cost and eco-friendly green synthesis of silver nanoparticles using Prunus japonica (Rosaceae) leaf extract and their antibacterial, antioxidant properties.

Science.gov (United States)

Saravanakumar, Arthanari; Peng, Mei Mei; Ganesh, Mani; Jayaprakash, Jayabalan; Mohankumar, Murugan; Jang, Hyun Tae

2017-09-01

Low cost and eco-friendly green synthesis of silver nanoparticles (AgNPs) from silver nitrate (AgNO 3 ) using Prunus japonica leaves extract as reducing agent by a simple method at room temperature. The biosynthesized nanoparticles (NPs) were characterized by UV-Vis, tunneling electron microscopy (HR-TEM), scanning electron microscopy (SEM) coupled with X-ray energy dispersive spectrophotometer (EDAX), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). In UV-Vis spectroscopy results, the λ max was observed at 441 nm. The AgNPs synthesized were spherical, hexagonal, and irregular in shapes. The EDAX and XRD spectrum confirmed the presence of silver ions and crystalline nature of synthesized AgNPs. FTIR showed the functional groups such as C = O, N-H and C-N groups involved in the reduction of Ag +  to Ag. 2, 2-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay was performed and it showed the percentage inhibition in concentration-dependent manner. The synthesized AgNPs showed antibacterial activity against Escherichia coli, Proteus vulgaris, Staphylococcus aureus and Bacillus cereus to different extents and the higher activity was observed in Proteus vulgaris.

Managing the BaBar object oriented database

International Nuclear Information System (INIS)

Hasan, A.; Trunov, A.

2001-01-01

The BaBar experiment stores its data in an Object Oriented federated database supplied by Objectivity/DB(tm). This database is currently 350TB in size and is expected to increase considerably as the experiment matures. Management of this database requires careful planning and specialized tools in order to make the data available to physicists in an efficient and timely manner. The authors discuss the operational issues and management tools that were developed during the previous run to deal with this vast quantity of data at SLAC

Eco-friendly microbial route to synthesize cobalt nanoparticles using Bacillus thuringiensis against malaria and dengue vectors.

Science.gov (United States)

Marimuthu, Sampath; Rahuman, Abdul Abdul; Kirthi, Arivarasan Vishnu; Santhoshkumar, Thirunavukkarasu; Jayaseelan, Chidambaram; Rajakumar, Govindasamy

2013-12-01

The developments of resistance and persistence to chemical insecticides and concerns about the non-target effects have prompted the development of eco-friendly mosquito control agents. The aim of this study was to investigate the larvicidal activities of synthesized cobalt nanoparticles (Co NPs) using bio control agent, Bacillus thuringiensis against malaria vector, Anopheles subpictus and dengue vector, Aedes aegypti (Diptera: Culicidae). The synthesized Co NPs were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), Field-emission scanning electron microscopy (FESEM) with energy dispersive X-ray spectroscopy, and Transmission electron microscopy (TEM). XRD analysis showed three distinct diffraction peaks at 27.03°, 31.00°, and 45.58° indexed to the planes 102, 122, and 024, respectively on the face-centered cubic cobalt acetate with an average size of 85.3 nm. FTIR spectra implicated role of the peak at 3,436 cm(-1) for O-H hydroxyl group, 2924 cm(-1) for methylene C-H stretch in the formation of Co NPs. FESEM analysis showed the topological and morphological appearance of NPs which were found to be spherical and oval in shape. TEM analysis showed polydispersed and clustered NPs with an average size of 84.81 nm. The maximum larvicidal mortality was observed in the cobalt acetate solution, B. thuringiensis formulation, and synthesized Co NPs against fourth instar larvae of A. subpictus and A. aegypti with LC50 values of 29.16, 8.12, 3.59 mg/L; 34.61, 6.94, and 2.87 mg/L; r (2) values of 0.986, 0.933, 0.942; 0.962, 0.957, and 0.922, respectively.

The YH database: the first Asian diploid genome database

DEFF Research Database (Denmark)

Li, Guoqing; Ma, Lijia; Song, Chao

2009-01-01

genome consensus. The YH database is currently one of the three personal genome database, organizing the original data and analysis results in a user-friendly interface, which is an endeavor to achieve fundamental goals for establishing personal medicine. The database is available at http://yh.genomics.org.cn....

Nonvolatile memory thin-film transistors using biodegradable chicken albumen gate insulator and oxide semiconductor channel on eco-friendly paper substrate.

Science.gov (United States)

Kim, So-Jung; Jeon, Da-Bin; Park, Jung-Ho; Ryu, Min-Ki; Yang, Jong-Heon; Hwang, Chi-Sun; Kim, Gi-Heon; Yoon, Sung-Min

2015-03-04

Nonvolatile memory thin-film transistors (TFTs) fabricated on paper substrates were proposed as one of the eco-friendly electronic devices. The gate stack was composed of chicken albumen gate insulator and In-Ga-Zn-O semiconducting channel layers. All the fabrication processes were performed below 120 °C. To improve the process compatibility of the synthethic paper substrate, an Al2O3 thin film was introduced as adhesion and barrier layers by atomic layer deposition. The dielectric properties of biomaterial albumen gate insulator were also enhanced by the preparation of Al2O3 capping layer. The nonvolatile bistabilities were realized by the switching phenomena of residual polarization within the albumen thin film. The fabricated device exhibited a counterclockwise hysteresis with a memory window of 11.8 V, high on/off ratio of approximately 1.1 × 10(6), and high saturation mobility (μsat) of 11.5 cm(2)/(V s). Furthermore, these device characteristics were not markedly degraded even after the delamination and under the bending situration. When the curvature radius was set as 5.3 cm, the ION/IOFF ratio and μsat were obtained to be 5.9 × 10(6) and 7.9 cm(2)/(V s), respectively.

Access database application in medical treatment management platform

International Nuclear Information System (INIS)

Wu Qingming

2014-01-01

For timely, accurate and flexible access to medical expenses data, we applied Microsoft Access 2003 database management software, and we finished the establishment of a management platform for medical expenses. By developing management platform for medical expenses, overall hospital costs for medical expenses can be controlled to achieve a real-time monitoring of medical expenses. Using the Access database management platform for medical expenses not only changes the management model, but also promotes a sound management system for medical expenses. (authors)

Database basic design for safe management radioactive waste

International Nuclear Information System (INIS)

Son, D. C.; Ahn, K. I.; Jung, D. J.; Cho, Y. B.

2003-01-01

As the amount of radioactive waste and related information to be managed are increasing, some organizations are trying or planning to computerize the management on radioactive waste. When we consider that information on safe management of radioactive waste should be used in association with national radioactive waste management project, standardization of data form and its protocol is required, Korea Institute of Nuclear Safety(KINS) will establish and operate nationwide integrated database in order to effectively manage a large amount of information on national radioactive waste. This database allows not only to trace and manage the trend of radioactive waste occurrence and in storage but also to produce reliable analysis results for the quantity accumulated. Consequently, we can provide necessary information for national radioactive waste management policy and related industry's planing. This study explains the database design which is the essential element for information management

Enhanced corrosion resistance of stainless steel type 316 in sulphuric acid solution using eco-friendly waste product

Science.gov (United States)

Sanni, O.; Popoola, A. P. I.; Fayomi, O. S. I.

2018-06-01

Literature has shown that different organic compounds are effective corrosion inhibitors for metal in acidic environments. Such compounds usually contain oxygen, nitrogen or sulphur and function through adsorption on the metal surface, thereby creating a barrier for corrosion attack. Unfortunately, these organic compounds are toxic, scarce and expensive. Therefore, plants, natural product and natural oils have been posed as cheap, environmentally acceptable, abundant, readily available and effective molecules having low environmental impact. The corrosion resistance of austenitic stainless steel Type 316 in the presence of eco-friendly waste product was studied using weight loss and potentiodynamic polarization techniques in 0.5 M H2SO4. The corrosion rate and corrosion potential of the steel was significantly altered by the studied inhibitor. Results show that increase in concentration of the inhibitor hinders the formation of the passive film. Experimental observation shows that its pitting potential depends on the concentration of the inhibitor in the acid solution due to adsorption of anions at the metal film interface. The presence of egg shell powder had a strong influence on the corrosion resistance of stainless steel Type 316 with highest inhibition efficiency of 94.74% from weight loss analysis, this is as a result of electrochemical action and inhibition of the steel by the ionized molecules of the inhibiting compound which influenced the mechanism of the redox reactions responsible for corrosion and surface deterioration. Inhibitor adsorption fits the Langmuir isotherm model. The two methods employed for the corrosion assessment were in good agreement.

A database for compliance with land disposal restrictions

International Nuclear Information System (INIS)

McCoy, M.W.

1990-09-01

The new restrictions on land disposal introduce additional challenges to hazardous waste managers. Laboratory waste streams consisting of small volumes of diverse waste types will be particularly difficult to manage due to the large number of possible treatment standards that could be applied. To help remedy this management problem, a user-friendly database has been developed to provide the regulatory information required for each of the hazardous wastes present in the wastes stream of a large research laboratory. 3 figs., 1 tab

Synthesis of eco-friendly silver nanoparticles from Morinda tinctoria leaf extract and its larvicidal activity against Culex quinquefasciatus.

Science.gov (United States)

Kumar, K Ramesh; Nattuthurai, N; Gopinath, Ponraj; Mariappan, Tirupathi

2015-02-01

Mosquitoes are the major vector for the transmission of malaria, dengue fever, yellow fever, filariasis, chikungunya and Japanese encephalitis, and they accounted for global mortality and morbidity with increased resistance to common insecticides. The aim of this study was to investigate the larvicidal potential of the acetone leaf extracts of Morinda tinctoria and synthesized silver nanoparticles against third instar larvae of Culex quinquefasciatus Say (Diptera: Culicidae). Nanoparticles are being used in many commercial applications. It was found that aqueous silver ions can be reduced by aqueous extract of plant parts to generate extremely stable silver nanoparticles in water. Synthesized AgNPs were characterized by ultraviolet-visible (UV-vis) spectroscopy, Atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FT-IR) analysis. The synthesized silver nanoparticles have also been tested against the third instar larvae of C. quinquefasciatus. The leaf extract and the AgNPs high mortality values were 50 % lethal concentration (LC50) = 8.088 and 1.442 ppm against C. quinquefasciatus, respectively. The results recorded from ultraviolet-visible spectroscopy, atomic force microscopy and Fourier transform infrared spectroscopy support the biosynthesis and characterization of silver nanoparticles. These results suggest that the leaf extract of M. tinctoria and synthesis of AgNPs have the potential to be used as an ideal eco-friendly approach for the control of C. quinquefasciatus. By this approach, it is suggestive that this rapid synthesis of nanoparticles would be proper for developing a biological process for mosquito control.

One-Pot Fabrication and Characterization of Silver Nanoparticles Using Solanum lycopersicum: An Eco-Friendly and Potent Control Tool against Rose Aphid, Macrosiphum rosae

International Nuclear Information System (INIS)

Bhattacharyya, A.; Prasad, R.; Buhroo, A. A.; Yousuf, I.; Khanday, A. L.; Duraisamy, P.; Umadevi, M.; Bindhu, M. R.; Govindarajan, M.

2016-01-01

The espousal of nano technology is a current come-up of the present revolution. As we know that the rose aphid, Macrosiphum rosae (Hemiptera: Aphididae), is a key pest on rose plant in Kashmir Valley, India, it exhibits a worldwide distribution. In the present study, we have synthesized biologically silver nanoparticles (Ag NPs) from Solanum lycopersicum and characterized them by UV-vis spectroscopy, TEM, and X-RD analysis. The experiment was performed by leaf dip method. Insecticidal solutions of different Ag NPs concentrations, namely, 200, 300, 400, and 500 ppm, were tested on M. rosae. For assessment purposes, leaves were treated with distilled water (used as control). Aphid mortality data revealed that the Ag NPs were effective at 500 ppm concentration. As the concentration and day’s treatment increased, the aphid mortality rate also increased. There were statistically significant differences in M. rosae mortality between concentrations by LSD at 5%. In wrapping up, the use of Ag NPs in pest control processes will be the most novel eco-friendly approach in the Kashmir Valley, India, in future.

Performance Enhancements for Advanced Database Management Systems

OpenAIRE

Helmer, Sven

2000-01-01

New applications have emerged, demanding database management systems with enhanced functionality. However, high performance is a necessary precondition for the acceptance of such systems by end users. In this context we developed, implemented, and tested algorithms and index structures for improving the performance of advanced database management systems. We focused on index structures and join algorithms for set-valued attributes.

The ATLAS Distributed Data Management System & Databases

CERN Document Server

Garonne, V; The ATLAS collaboration; Barisits, M; Beermann, T; Vigne, R; Serfon, C

2013-01-01

The ATLAS Distributed Data Management (DDM) System is responsible for the global management of petabytes of high energy physics data. The current system, DQ2, has a critical dependency on Relational Database Management Systems (RDBMS), like Oracle. RDBMS are well-suited to enforcing data integrity in online transaction processing applications, however, concerns have been raised about the scalability of its data warehouse-like workload. In particular, analysis of archived data or aggregation of transactional data for summary purposes is problematic. Therefore, we have evaluated new approaches to handle vast amounts of data. We have investigated a class of database technologies commonly referred to as NoSQL databases. This includes distributed filesystems, like HDFS, that support parallel execution of computational tasks on distributed data, as well as schema-less approaches via key-value stores, like HBase. In this talk we will describe our use cases in ATLAS, share our experiences with various databases used ...

Dye sensitized solar cell based on environmental friendly eosin Y dye and Al doped titanium dioxide nano particles

Science.gov (United States)

Kulkarni, Swati S.; Bodkhe, Gajanan A.; Shirsat, Sumedh M.; Hussaini, S. S.; Shejwal, N. N.; Shirsat, Mahendra D.

2018-03-01

Present communication deals with the development of cost effective dye sensitized solar cell (DSSC) with eco-friendly materials. Eco-friendly Eosin Y dye was used to sensitize photo anode which was fabricated using undoped and Aluminium doped titanium dioxide (TiO2) nanoparticles. Undoped and Aluminium doped TiO2 nanoparticles were synthesized by simple and cost effective sol-gel method. Aluminium doped and undoped TiO2 nanoparticles were characterized using UV-visible, FT-IR spectroscopy, x-ray Diffraction, and Scanning Electron Micrograph with EDX. The photo-voltaic activity of the cell was studied under light irradiation of 100 milliwatt cm-2. Aluminium doped TiO2 nanoparticle photo electrode exhibits more than 60% increase in cell efficiency as compared to the undoped TiO2 nanoparticle photo electrode.

The Application Potential of Eco-Efficiency for Greening Company

Science.gov (United States)

Prasaja, Lukman Eka; Hadiyanto

2018-02-01

Eco-Efficiency emerged in the 1990s as a measure of "the efficiency that ecological sources use to meet human needs." As a tool in economic and environmental integration, Eco-efficiency needs to be promoted further so that regulation in government and industrial management can include it as an important instrument. This paper provides several approaches that can help various industries to develop effective eco-efficiency principles. The approach used is to maximize the role of the Steering Committee of the company's internal environment. Utilization of natural resources such as water, forests, mines and energy needs need to be balanced with Eco-Efficiency so that natural exploitation can be well controlled so that sustainable development aspired by the world can be realized.

Water and future

International Nuclear Information System (INIS)

2010-03-01

This is material of the 18th world water day in 2010 which reports current situation of water resources such as water world, in water in Korea and water dispute, water and disaster like climate change, flood, drought, historical report about drought and flood, water resources facilities in Korea, disaster management system, development and management of eco-friendly water resources, eco-friendly water resources management and river maintenance, renovating four rivers and supply and procure of safe water.

EcoMark 2.0

DEFF Research Database (Denmark)

Guo, Chenjuan; Yang, Bin; Andersen, Ove

2015-01-01

Eco-routing is a simple yet effective approach to substantially reducing the environmental impact, e.g., fuel consumption and greenhouse gas (GHG) emissions, of vehicular transportation. Eco-routing relies on the ability to reliably quantify the environmental impact of vehicles as they travel...... in a spatial network. The procedure of quantifying such vehicular impact for road segments of a spatial network is called eco-weight assignment. EcoMark 2.0 proposes a general framework for eco-weight assignment to enable eco-routing. It studies the abilities of six instantaneous and five aggregated models......, and experiments for assessing the utility of the impact models in assigning eco-weights. The application of EcoMark 2.0 indicates that the instantaneous model EMIT and the aggregated model SIDRA-Running are suitable for assigning eco-weights under varying circumstances. In contrast, other instantaneous models...

Database management in the new GANIL control system

International Nuclear Information System (INIS)

Lecorche, E.; Lermine, P.

1993-01-01

At the start of the new control system design, decision was made to manage the huge amount of data by means of a database management system. The first implementations built on the INGRES relational database are described. Real time and data management domains are shown, and problems induced by Ada/SQL interfacing are briefly discussed. Database management concerns the whole hardware and software configuration for the GANIL pieces of equipment and the alarm system either for the alarm configuration or for the alarm logs. An other field of application encompasses the beam parameter archiving as a function of the various kinds of beams accelerated at GANIL (ion species, energies, charge states). (author) 3 refs., 4 figs

Distributed Database Management Systems A Practical Approach

CERN Document Server

Rahimi, Saeed K

2010-01-01

This book addresses issues related to managing data across a distributed database system. It is unique because it covers traditional database theory and current research, explaining the difficulties in providing a unified user interface and global data dictionary. The book gives implementers guidance on hiding discrepancies across systems and creating the illusion of a single repository for users. It also includes three sample frameworksâ€"implemented using J2SE with JMS, J2EE, and Microsoft .Netâ€"that readers can use to learn how to implement a distributed database management system. IT and

NGNP Risk Management Database: A Model for Managing Risk

International Nuclear Information System (INIS)

Collins, John

2009-01-01

To facilitate the implementation of the Risk Management Plan, the Next Generation Nuclear Plant (NGNP) Project has developed and employed an analytical software tool called the NGNP Risk Management System (RMS). A relational database developed in Microsoft(reg s ign) Access, the RMS provides conventional database utility including data maintenance, archiving, configuration control, and query ability. Additionally, the tool's design provides a number of unique capabilities specifically designed to facilitate the development and execution of activities outlined in the Risk Management Plan. Specifically, the RMS provides the capability to establish the risk baseline, document and analyze the risk reduction plan, track the current risk reduction status, organize risks by reference configuration system, subsystem, and component (SSC) and Area, and increase the level of NGNP decision making.

NGNP Risk Management Database: A Model for Managing Risk

Energy Technology Data Exchange (ETDEWEB)

John Collins

2009-09-01

To facilitate the implementation of the Risk Management Plan, the Next Generation Nuclear Plant (NGNP) Project has developed and employed an analytical software tool called the NGNP Risk Management System (RMS). A relational database developed in Microsoft® Access, the RMS provides conventional database utility including data maintenance, archiving, configuration control, and query ability. Additionally, the tool’s design provides a number of unique capabilities specifically designed to facilitate the development and execution of activities outlined in the Risk Management Plan. Specifically, the RMS provides the capability to establish the risk baseline, document and analyze the risk reduction plan, track the current risk reduction status, organize risks by reference configuration system, subsystem, and component (SSC) and Area, and increase the level of NGNP decision making.

Computerized nuclear material database management system for power reactors

International Nuclear Information System (INIS)

Cheng Binghao; Zhu Rongbao; Liu Daming; Cao Bin; Liu Ling; Tan Yajun; Jiang Jincai

1994-01-01

The software packages for nuclear material database management for power reactors are described. The database structure, data flow and model for management of the database are analysed. Also mentioned are the main functions and characterizations of the software packages, which are successfully installed and used at both the Daya Bay Nuclear Power Plant and the Qinshan Nuclear Power Plant for the purposed of handling nuclear material database automatically

Biosynthesis of planet friendly bioplastics using renewable carbon source.

Science.gov (United States)

Jain, Roopesh; Tiwari, Archana

2015-01-01

Plastics are uniquely flexible materials that offer considerable benefits as a simple packing to complex engineering material. Traditional synthetic polymers (often called plastics), such as polypropylene and polyethylene have been derived from non-renewable petrochemicals and known to cause environmental concerns due to their non-biodegradable nature. The enormous use of petroleum-based plastic compounds emphasized a need for sustainable alternatives derived from renewable resources. Bioplastics have attracted widespread attention, as eco-friendly and eco-tolerable alternative. But they have got certain limitations as well, such as high cost of production and unsatisfactory mechanical properties. In this study we have found agriculture waste (AW) as low-cost and renewable substrate for the production of bioplastics in bacterial fermentation. Improvement in tensile properties of produced bioplastic film has also been documented upon blending with Cellulose Acetate Butyrate (CAB).

Eco-friendly synthesis of core-shell structured (TiO2/Li2CO3) nanomaterials for low cost dye-sensitized solar cells.

Science.gov (United States)

Karuppuchamy, S; Brundha, C

2016-12-01

Core-shell structured TiO 2 /Li 2 CO 3 electrode was successfully synthesized by eco-friendly solution growth technique. TiO 2 /Li 2 CO 3 electrodes were characterized using X-ray Diffractometer (XRD), Scanning electron microscopy (SEM) and photocurrent-voltage measurements. The synthesized core-shell electrode material was sensitized with tetrabutylammonium cis-di(thiocyanato)-N,N'-bis(4-carboxylato-4'-carboxylic acid-2,2'-bipyridine)ruthenate(II) (N-719). The performance of dye-sensitized solar cells (DSCs) based on N719 dye modified TiO 2 /Li 2 CO 3 electrodes was investigated. The effect of various shell thickness on the photovoltaic performance of the core-shell structured electrode is also investigated. We found that Li 2 CO 3 shells of all thicknesses perform as inert barriers which improve open-circuit voltage (V oc ) of the DSCs. The energy conversion efficiency was greatly dependent on the thickness of Li 2 CO 3 on TiO 2 film, and the highest efficiency of 3.7% was achieved at the optimum Li 2 CO 3 shell layer. Copyright © 2015 Elsevier Inc. All rights reserved.

Brain Tumor Database, a free relational database for collection and analysis of brain tumor patient information.

Science.gov (United States)

Bergamino, Maurizio; Hamilton, David J; Castelletti, Lara; Barletta, Laura; Castellan, Lucio

2015-03-01

In this study, we describe the development and utilization of a relational database designed to manage the clinical and radiological data of patients with brain tumors. The Brain Tumor Database was implemented using MySQL v.5.0, while the graphical user interface was created using PHP and HTML, thus making it easily accessible through a web browser. This web-based approach allows for multiple institutions to potentially access the database. The BT Database can record brain tumor patient information (e.g. clinical features, anatomical attributes, and radiological characteristics) and be used for clinical and research purposes. Analytic tools to automatically generate statistics and different plots are provided. The BT Database is a free and powerful user-friendly tool with a wide range of possible clinical and research applications in neurology and neurosurgery. The BT Database graphical user interface source code and manual are freely available at http://tumorsdatabase.altervista.org. © The Author(s) 2013.

SLIMS--a user-friendly sample operations and inventory management system for genotyping labs.

Science.gov (United States)

Van Rossum, Thea; Tripp, Ben; Daley, Denise

2010-07-15

We present the Sample-based Laboratory Information Management System (SLIMS), a powerful and user-friendly open source web application that provides all members of a laboratory with an interface to view, edit and create sample information. SLIMS aims to simplify common laboratory tasks with tools such as a user-friendly shopping cart for subjects, samples and containers that easily generates reports, shareable lists and plate designs for genotyping. Further key features include customizable data views, database change-logging and dynamically filled pre-formatted reports. Along with being feature-rich, SLIMS' power comes from being able to handle longitudinal data from multiple time-points and biological sources. This type of data is increasingly common from studies searching for susceptibility genes for common complex diseases that collect thousands of samples generating millions of genotypes and overwhelming amounts of data. LIMSs provide an efficient way to deal with this data while increasing accessibility and reducing laboratory errors; however, professional LIMS are often too costly to be practical. SLIMS gives labs a feasible alternative that is easily accessible, user-centrically designed and feature-rich. To facilitate system customization, and utilization for other groups, manuals have been written for users and developers. Documentation, source code and manuals are available at http://genapha.icapture.ubc.ca/SLIMS/index.jsp. SLIMS was developed using Java 1.6.0, JSPs, Hibernate 3.3.1.GA, DB2 and mySQL, Apache Tomcat 6.0.18, NetBeans IDE 6.5, Jasper Reports 3.5.1 and JasperSoft's iReport 3.5.1.

Plant Extract Mediated Eco-Friendly Synthesis of Pd@Graphene Nanocatalyst: An Efficient and Reusable Catalyst for the Suzuki-Miyaura Coupling

Directory of Open Access Journals (Sweden)

Mujeeb Khan

2017-01-01

synthesis of PG-HRG-Pd nanocatalyst and the eco-friendly protocol used for the Suzuki coupling offers a mild and effective substitute to the existing protocols and may significantly contribute to the endeavors of green chemistry.

EcoPrinciples Connect: A Pilot Project Matching Ecological Principles with Available Data to Promote Ecosystem-Based Management

Science.gov (United States)

Martone, R. G.; Erickson, A.; Mach, M.; Hale, T.; McGregor, A.; Prahler, E. E.; Foley, M.; Caldwell, M.; Hartge, E. H.

2016-12-01

Ocean and coastal practitioners work within existing financial constraints, jurisdictions, and legislative authorities to manage coastal and marine resources while seeking to promote and maintain a healthy and productive coastal economy. Fulfilling this mandate necessitates incorporation of best available science, including ecosystem-based management (EBM) into coastal and ocean management decisions. To do this, many agencies seek ways to apply lessons from ecological theory into their decision processes. However, making direct connections between science and management can be challenging, in part because there is no process for linking ecological principles (e.g., maintaining species diversity, habitat diversity, connectivity and populations of key species) with available data. Here we explore how incorporating emerging data and methods into resource management at a local scale can improve the overall health of our coastal and marine ecosystems. We introduce a new web-based interface, EcoPrinciples Connect, that links marine managers to scientific and geospatial information through the lens of these ecological principles, ultimately helping managers become more efficient, more consistent, and advance the integration of EBM. The EcoPrinciples Connect tool grew directly out of needs identified in response to a Center for Ocean Solutions reference guide, Incorporating Ecological Principles into California Ocean and Coastal Management: Examples from Practice. Here we illustrate how we have worked to translate the information in this guide into a co-developed, user-centric tool for agency staff. Specifically, we present a pilot project where we match publicly available data to the ecological principles for the California San Francisco Bay Conservation and Development Commission. We will share early lessons learned from pilot development and highlight opportunities for future transferability to an expanded group of practitioners.

Eco-Friendly Multipurpose Lubricating Greases from Vegetable Residual Oils

Directory of Open Access Journals (Sweden)

Ponnekanti Nagendramma

2015-10-01

Full Text Available Environmentally friendly multipurpose grease formulation has been synthesized by using Jatropha vegetable residual oil with lithium soap and multifunctional additive. The thus obtained formulation was evaluated for its tribological performance on a four-ball tribo-tester. The anti-friction and anti-wear performance characteristics were evaluated using standard test methods. The biodegradability and toxicity of the base oil was assessed. The results indicate that the synthesized residual oil grease formulation shows superior tribological performance when compared to the commercial grease. On the basis of physico-chemical characterization and tribological performance the vegetable residual oil was found to have good potential for use as biodegradable multipurpose lubricating grease. In addition, the base oils are biodegradable and non toxic.

Exploring the Applications of Bio-Eco Architecture for Sustainable Design and Construction process

OpenAIRE

M. M. Naguib; M. A. M. Hanafi

2013-01-01

It has been commonly noted that the main perception of nature influenced forms isbasically aesthetic while little concern is given to the importance of inspiring from naturein the construction and structural performance of buildings as well as in the naturalecological architectural solutions, thus, this paper will focus on bio-inspired architectureapproach which embraces the eco-friendly practices of sustainable construction, the useof natural materials and the energy conservation by mimickin...

An online database of nuclear electromagnetic moments

International Nuclear Information System (INIS)

Mertzimekis, T.J.; Stamou, K.; Psaltis, A.

2016-01-01

Measurements of nuclear magnetic dipole and electric quadrupole moments are considered quite important for the understanding of nuclear structure both near and far from the valley of stability. The recent advent of radioactive beams has resulted in a plethora of new, continuously flowing, experimental data on nuclear structure – including nuclear moments – which hinders the information management. A new, dedicated, public and user friendly online database ( (http://magneticmoments.info)) has been created comprising experimental data of nuclear electromagnetic moments. The present database supersedes existing printed compilations, including also non-evaluated series of data and relevant meta-data, while putting strong emphasis on bimonthly updates. The scope, features and extensions of the database are reported.

Dossier Shell Eco-Marathon; Dossier Shell Eco-Marathon

Energy Technology Data Exchange (ETDEWEB)

Matla, P.

2012-05-15

Three articles address subjects concerning the annual race with highly energy efficient cars: the Shell Eco-Marathon. [Dutch] In 3 artikelen wordt aandacht besteed aan de ontwerpen voor de jaarlijkse race met superzuinige auto's, de Shell Eco-Marathon.

Eco-friendly biorefractory films of gelatin and TEMPO-oxidized cellulose ester for food packaging application.

Science.gov (United States)

Zhuang, Chen; Tao, Furong; Cui, Yuezhi

2017-08-01

In recent years, many types of food-packaging films and composites have been prepared using gelatin because of its good film-forming ability, non-toxic nature and cost-effectiveness. However, the relatively weak thermal stability, poor mechanical properties and easily-degradable quality limit the potential application of gelatin as a practical material. Microcrystalline cellulose (MCC), which comprises one of the most abundant biomass resources, has been regarded as a safe and reliable food additive because it has the same ingredients as the cellulose in people's daily intake. Food-packaging films with the excellent properties provided by gelatin and oxidized-cellulose represent a topic of great interest. MCC was modified by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation and chosen as the base of the macromolecule cross-linker (TMN). After modification of gelatin film by TMN, the minimum amount of free -NH 2 in solution was 4.8 × 10 -4  mol g -1 ). The thermal property obviously increased (from 322.31  o C to 352.63  o C) and was crucial for usage in the food industry. The highest water contact value 123.09° (η = 25%) indicated a better surface hydrophobicity. The higher E ab (58.88%) and lower E m (77.16%) demonstrated that a more flexible and shatter-proof material was obtained. Water vapor uptake studies suggested increased moisture absorption and greater swelling ability. The film material obtained in the present study was safe, stable, eco-friendly and biorefractory and could also be decomposed completely by the environment after disposal as a result of the properties of the ingredients gelatin and cellulose. The incorporation of a cellulosic cross-linker to gelatin-based films was an ideal choice with respect to developing a packaging for the food industry. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Eco-tourism potential along the Indian coasts

Digital Repository Service at National Institute of Oceanography (India)

Untawale, A.G.; Dhargalkar, V.K.

in India for creating awareness in education, research, conservation, sustainable utilization and management of flora and fauna. India has several biosphere reserves, marine parks and sanctuaries having different eco-biological components and uniqueness...

An Eco-Friendly Ultrasound-Assisted Synthesis of Novel Fluorinated Pyridinium Salts-Based Hydrazones and Antimicrobial and Antitumor Screening

Science.gov (United States)

Rezki, Nadjet; Al-Sodies, Salsabeel A.; Aouad, Mohamed R.; Bardaweel, Sanaa; Messali, Mouslim; El Ashry, El Sayed H.

2016-01-01

The present work reports an efficient synthesis of fluorinated pyridinium salts-based hydrazones under both conventional and eco-friendly ultrasound procedures. The synthetic approach first involves the preparation of halogenated pyridinium salts through the condensation of isonicotinic acid hydrazide (1) with p-fluorobenzaldehyde (2) followed by the nucleophilic alkylation of the resulting N-(4-fluorobenzylidene)isonicotinohydrazide (3) with a different alkyl iodide. The iodide counteranion of 5–10 was subjected to an anion exchange metathesis reaction in the presence of an excess of the appropriate metal salts to afford a new series of fluorinated pyridinium salts tethering a hydrazone linkage 11–40. Ultrasound irradiation led to higher yields in considerably less time than the conventional methods. The newly synthesized ILs were well-characterized with FT-IR, 1H NMR, 13C NMR, 11B, 19F, 31P and mass spectral analyses. The ILs were also screened for their antimicrobial and antitumor activities. Within the series, the salts tethering fluorinated counter anions 11–13, 21–23, 31–33 and 36–38 were found to be more potent against all bacterial and fungal strains at MIC 4–8 µg/mL. The in vitro antiproliferative activity was also investigated against four tumor cell lines (human ductal breast epithelial tumor T47D, human breast adenocarcinoma MCF-7, human epithelial carcinoma HeLa and human epithelial colorectal adenocarcinoma Caco-2) using the MTT assay, which revealed that promising antitumor activity was exhibited by compounds 5, 12 and 14. PMID:27213367

Adolescents' and Best Friend's Depressive Symptoms and Conflict Management: Intraindividual and Interpersonal Processes Over Time.

Science.gov (United States)

Boersma-van Dam, Elise; Hale, Bill; Koot, Hans; Meeus, Wim; Branje, Susan

2016-12-12

This 6-year longitudinal study examined the relation between 3 conflict management styles (i.e., problem solving, conflict engagement, and compliance) and depressive symptoms in adolescent-best friend relationships. Participants were 479 Dutch adolescents and their best friend who reported annually on depressive symptoms and conflict management styles toward each other. Bidirectional effects between conflict management styles and depressive symptoms were studied both within adolescents (intraindividual) and between adolescent best friends (interpersonal). A positive interpersonal effect of depressive symptoms of one dyad member on depressive symptoms of the other member was found. Similarly, higher positive problem solving and conflict engagement of one dyad member predicted respectively higher problem solving and conflict engagement of the other dyad member. Adolescents who reported more depressive symptoms reported more conflict engagement and compliance over time. In addition, for boys, higher levels of depressive symptoms of one dyad member were related to more problem solving by the other member over time. The current study contributed to the literature by showing that depressive symptoms and conflict management are related constructs in adolescents and that both intrapersonal and interpersonal processes contribute to this relation.

Original Article. An evaluation of some eco-friendly biopesticides against Bemisia tabaci on two greenhouse tomato varieties in Egypt

Directory of Open Access Journals (Sweden)

Abdel-Razek Atef S.

2016-08-01

Full Text Available This study has two main approaches. First, it exploits the susceptibility of tomato cultivars as a prophylactic measure to detect auto resistance characters of the tested tomato varieties against Bemisia tabaci (Gennadius (Homoptera: Aleyrodidae. Secondly, it evaluates the efficacy of different bio-rational insecticides against B. tabaci under greenhouse conditions. The results exhibited a special significance in B. tabaci infestation suitability between the two tomato varieties with a high infestation significance found in the Shifa F1 hybrid tomato variety compared to the Savera F1 hybrid tomato variety in the first plantation period. Subsequently, in the second plantation period, there was a significant difference between the two tomato varieties. Bemisia tabaci showed a preference for the Shifa F1 hybrid over the Savera F1 hybrid tomato variety. These differences occurred during the 1st, 2nd, 4th, 6th, 7th, 8th, and 10th weeks. In the experimental trial for the efficacy of eco-friendly biorational insecticides, spinosad, azadirachtin, Beauveria bassiana and Metarhizium anisopliae, there were significant differences between the treated and untreated plants during the two plantation periods. A high efficacy of spinosad on the B. tabaci population was found. Bemisia tabaci infestation under all the applications was reduced from 50 to 94.61% for the two plantation periods. This obvious decrease in B. tabaci population increase attention to benefits of the different bio-rational insecticides.

The state and consumer confidence in eco-labeling: organic labeling in Denmark, Sweden, The United Kingdom and The United States

DEFF Research Database (Denmark)

Sønderskov, Kim Mannemar; Daugbjerg, Carsten

2011-01-01

in different organic food labeling regimes with varying degrees of governmental involvement. Using unique and detailed survey data from the US, United Kingdom, Denmark, and Sweden, the analysis shows that confidence is highest in countries with substantial state involvement. This suggests that governments can...... governmental involvement increases confidence. This suggests that government should just provide the basic legal framework for eco-labeling and leave the rest to non-governmental organizations. However, the empirical underpinning of this conclusion is insufficient. This paper analyses consumer confidence......Trustworthy eco-labels provide consumers with valuable information on environmentally friendly products and thus promote green consumerism. But what makes an eco-label trustworthy and what can government do to increase consumer confidence? The scant existing literature indicates that low...

Tool for assessing eco-efficiency in urban planning and design

Energy Technology Data Exchange (ETDEWEB)

Lahti, P., Email: pekka.lahti@vtt.fi

2012-06-15

The goal of this project was to develop a fast, comprehensive and user-friendly eco-efficiency estimation method for urban development. A preliminary study concluded that urban planners, designers and architects lack a practical and comprehensive tool for the overall assessment of community-level ecological performance. The report on the tool itself concluded findings concerning the needs of urban planners and designers in the City of Helsinki, which were transferred to the structure and contents of the assessment tool. The project continues the development efforts during the next couple of years, integrating 14 partners. (orig.)

EcoBears

DEFF Research Database (Denmark)

Nielsen, Nick; Pedersen, Sandra Bleuenn; Sørensen, Jens Ager

2015-01-01

In this paper, we introduce the EcoBears concept that aims to augment household appliances with functional and aesthetic features to promote their "use'' and "longevity of use'' to prevent their disposal. The EcoBears also aim to support the communication of environmental issues in the home setting....... We present our initial design and implementation of the EcoBears that consist of two bear modules (a mother and her cub). We also present our preliminary concept validations and lessons learned to be considered for future directions....

STARCH SULFURIC ACID: AN ALTERNATIVE, ECO-FRIENDLY CATALYST FOR BIGINELLI REACTION

Directory of Open Access Journals (Sweden)

Ramin Rezaei

2013-12-01

Full Text Available The one-pot multicomponent synthesis of 3,4-dihydropyrimidinone derivatives using starch sulfuric acid as an environmentally friendly biopolymer-based solid acid catalyst from aldehydes, β-keto esters and urea/ thiourea without solvent is described. Compared with classical Biginelli reaction conditions, this new method has the advantage of minimizing the cost operational hazards and environmental pollution, good yields, shorter reaction times and simple work-up.

Eco-friendly (green) synthesis of magnetically active gold nanoclusters

Science.gov (United States)

Kadasala, Naveen Reddy; Lin, Lu; Gilpin, Christopher; Wei, Alexander

2017-12-01

Au-FexOy composite nanoparticles (NPs) are of great technological interest due to their combined optical and magnetic properties. However, typical syntheses are neither simple nor ecologically friendly, creating a challenging situation for process scale-up. Here we describe conditions for preparing Au-FexOy NPs in aqueous solutions and at ambient temperatures, without resorting to solvents or amphiphilic surfactants with poor sustainability profiles. These magnetic gold nanoclusters (MGNCs) are prepared in practical yields with average sizes slightly below 100 nm, and surface plasmon resonances that extend to near-infrared wavelengths, and sufficient magnetic moment (up to 6 emu g-1) to permit collection within minutes by handheld magnets. The MGNCs also produce significant photoluminescence when excited at 488 nm. Energy dispersive X-ray (EDX) analysis indicates a relatively even distribution of Fe within the MGNCs, as opposed to a central magnetic core.

Insertion algorithms for network model database management systems

Science.gov (United States)

Mamadolimov, Abdurashid; Khikmat, Saburov

2017-12-01

The network model is a database model conceived as a flexible way of representing objects and their relationships. Its distinguishing feature is that the schema, viewed as a graph in which object types are nodes and relationship types are arcs, forms partial order. When a database is large and a query comparison is expensive then the efficiency requirement of managing algorithms is minimizing the number of query comparisons. We consider updating operation for network model database management systems. We develop a new sequantial algorithm for updating operation. Also we suggest a distributed version of the algorithm.

Database management system for large container inspection system

International Nuclear Information System (INIS)

Gao Wenhuan; Li Zheng; Kang Kejun; Song Binshan; Liu Fang

1998-01-01

Large Container Inspection System (LCIS) based on radiation imaging technology is a powerful tool for the Customs to check the contents inside a large container without opening it. The author has discussed a database application system, as a part of Signal and Image System (SIS), for the LCIS. The basic requirements analysis was done first. Then the selections of computer hardware, operating system, and database management system were made according to the technology and market products circumstance. Based on the above considerations, a database application system with central management and distributed operation features has been implemented

USING ECO-EVOLUTIONARY INDIVIDUAL-BASED MODELS TO INVESTIGATE SPATIALLY-DEPENDENT PROCESSES IN CONSERVATION GENETICS

Science.gov (United States)

Eco-evolutionary population simulation models are powerful new forecasting tools for exploring management strategies for climate change and other dynamic disturbance regimes. Additionally, eco-evo individual-based models (IBMs) are useful for investigating theoretical feedbacks ...

Management system of instrument database

International Nuclear Information System (INIS)

Zhang Xin

1997-01-01

The author introduces a management system of instrument database. This system has been developed using with Foxpro on network. The system has some characters such as clear structure, easy operation, flexible and convenient query, as well as the data safety and reliability

[Applications of eco-environmental big data: Progress and prospect].

Science.gov (United States)

Zhao, Miao Miao; Zhao, Shi Cheng; Zhang, Li Yun; Zhao, Fen; Shao, Rui; Liu, Li Xiang; Zhao, Hai Feng; Xu, Ming

2017-05-18

With the advance of internet and wireless communication technology, the fields of ecology and environment have entered a new digital era with the amount of data growing explosively and big data technologies attracting more and more attention. The eco-environmental big data is based airborne and space-/land-based observations of ecological and environmental factors and its ultimate goal is to integrate multi-source and multi-scale data for information mining by taking advantages of cloud computation, artificial intelligence, and modeling technologies. In comparison with other fields, the eco-environmental big data has its own characteristics, such as diverse data formats and sources, data collected with various protocols and standards, and serving different clients and organizations with special requirements. Big data technology has been applied worldwide in ecological and environmental fields including global climate prediction, ecological network observation and modeling, and regional air pollution control. The development of eco-environmental big data in China is facing many problems, such as data sharing issues, outdated monitoring facilities and techno-logies, and insufficient data mining capacity. Despite all this, big data technology is critical to solving eco-environmental problems, improving prediction and warning accuracy on eco-environmental catastrophes, and boosting scientific research in the field in China. We expected that the eco-environmental big data would contribute significantly to policy making and environmental services and management, and thus the sustainable development and eco-civilization construction in China in the coming decades.

Developing an eco-routing application.

Science.gov (United States)

2014-01-01

The study develops eco-routing algorithms and investigates and quantifies the system-wide impacts of implementing an eco-routing system. Two eco-routing algorithms are developed: one based on vehicle sub-populations (ECO-Subpopulation Feedback Assign...

The use of modern databases in managing nuclear material inventories

International Nuclear Information System (INIS)

Behrens, R.G.

1994-01-01

The need for a useful nuclear materials database to assist in the management of nuclear materials within the Department of Energy (DOE) Weapons Complex is becoming significantly more important as the mission of the DOE Complex changes and both international safeguards and storage issues become drivers in determining how these materials are managed. A well designed nuclear material inventory database can provide the Nuclear Materials Manager with an essential cost effective tool for timely analysis and reporting of inventories. This paper discusses the use of databases as a management tool to meet increasing requirements for accurate and timely information on nuclear material inventories and related information. From the end user perspective, this paper discusses the rationale, philosophy, and technical requirements for an integrated database to meet the needs for a variety of users such as those working in the areas of Safeguards, Materials Control and Accountability (MC ampersand A), Nuclear Materials Management, Waste Management, materials processing, packaging and inspection, and interim/long term storage

Eco-genetic modeling of contemporary life-history evolution.

Science.gov (United States)

Dunlop, Erin S; Heino, Mikko; Dieckmann, Ulf

2009-10-01

We present eco-genetic modeling as a flexible tool for exploring the course and rates of multi-trait life-history evolution in natural populations. We build on existing modeling approaches by combining features that facilitate studying the ecological and evolutionary dynamics of realistically structured populations. In particular, the joint consideration of age and size structure enables the analysis of phenotypically plastic populations with more than a single growth trajectory, and ecological feedback is readily included in the form of density dependence and frequency dependence. Stochasticity and life-history trade-offs can also be implemented. Critically, eco-genetic models permit the incorporation of salient genetic detail such as a population's genetic variances and covariances and the corresponding heritabilities, as well as the probabilistic inheritance and phenotypic expression of quantitative traits. These inclusions are crucial for predicting rates of evolutionary change on both contemporary and longer timescales. An eco-genetic model can be tightly coupled with empirical data and therefore may have considerable practical relevance, in terms of generating testable predictions and evaluating alternative management measures. To illustrate the utility of these models, we present as an example an eco-genetic model used to study harvest-induced evolution of multiple traits in Atlantic cod. The predictions of our model (most notably that harvesting induces a genetic reduction in age and size at maturation, an increase or decrease in growth capacity depending on the minimum-length limit, and an increase in reproductive investment) are corroborated by patterns observed in wild populations. The predicted genetic changes occur together with plastic changes that could phenotypically mask the former. Importantly, our analysis predicts that evolutionary changes show little signs of reversal following a harvest moratorium. This illustrates how predictions offered by

Ecological Risk Assessment of Land Use Change in the Poyang Lake Eco-economic Zone, China

Science.gov (United States)

Xie, Hualin; Wang, Peng; Huang, Hongsheng

2013-01-01

Land use/land cover change has been attracting increasing attention in the field of global environmental change research because of its role in the social and ecological environment. To explore the ecological risk characteristics of land use change in the Poyang Lake Eco-economic Zone of China, an eco-risk index was established in this study by the combination of a landscape disturbance index with a landscape fragmentation index. Spatial distribution and gradient difference of land use eco-risk are analyzed by using the methods of spatial autocorrelation and semivariance. Results show that ecological risk in the study area has a positive correlation, and there is a decreasing trend with the increase of grain size both in 1995 and 2005. Because the area of high eco-risk value increased from 1995 to 2005, eco-environment quality declined slightly in the study area. There are distinct spatial changes in the concentrated areas with high land use eco-risk values from 1995 to 2005. The step length of spatial separation of land use eco-risk is comparatively long—58 km in 1995 and 11 km in 2005—respectively. There are still nonstructural factors affecting the quality of the regional ecological environment at some small-scales. Our research results can provide some useful information for land eco-management, eco-environmental harnessing and restoration. In the future, some measures should be put forward in the regions with high eco-risk value, which include strengthening land use management, avoiding unreasonable types of land use and reducing the degree of fragmentation and separation. PMID:23343986

Green Port / Eco Port Project - Applications and Procedures in Turkey

Science.gov (United States)

Akgul, Burak

2017-12-01

As being the heartlands of international trade, sea ports are the junction points of land and sea routes. The growth of global trade has led to the development of number and capacity as well as the service quality of ports. The policies and procedures applied during construction, operation and development of ports under development with environmental considerations scope has evolved in accordance with the needs of global trends. Although maritime transportation provides the most ecofriendly transportation method, the reduction of potential environmental threats and continuous improvement of ports and their vicinity is paramount from environmental concerns with regards to the international environmental standards. In the context of the study, national and international legal regulations governing the control of the environmental impacts of the activity groups causing pollution in Turkey based sea ports were viewed. In addition, the models applied during the measurement and documentation of environmental impacts were investigated. The most important aspects in terms of the effectiveness of the environmental management models are legal regulations. However, the standards applied at the ports without any legal obligation, such as EcoPorts applications, ISO 14001 standard, and the EMAS (Eco-Management and Audit Scheme) were sought in the scope of the study. The boundaries of the study were determined as the EU based Environmental Management Systems and the Green Port/Eco Port Project which is being administered by the Turkish Ministry of Transport, Maritime and Communication. “Marport”, which is Turkey’s first certified Green Port / Eco Port is designated as the experimental study site. In addition, the provisions in the ports of ESPO member countries are approached in order to compare the effectiveness and applicability of Green Port / Eco Port Project.

Environmentally-friendly practices in hotels

Directory of Open Access Journals (Sweden)

Miriam Mbasera

2016-06-01

Research purpose: To determine the environmentally-friendly practices in hotels in Zimbabwe and South Africa and establish the contribution that hotels are making towards mitigation of the negative environmental effects. Motivation for the study: Currently, the world is facing environmental issues, which include global climate change, ozone depletion, pollution, high consumption of resources and increasing amounts of solid waste. Hotels, as part of the tourism industry, exert a significant impact on the environment. While the extent and range of the impact that hotels exert on the environment suggest an urgent need to address this problem, the question that arises is whether hoteliers appreciate the need for environmentally-friendly initiatives in their establishments. Research design, approach and method: A qualitative research was carried out in eight hotels that employ the strategy of the case study in the aforementioned countries. Main findings: Currently, no policies for green management exist, although some hotels do engage in some environmentally-friendly practices. Some hotel managers do not implement green management initiatives to mitigate the environmental problems emanating from their hotel operations. Practical and/or managerial implications: This indicates that a gap exists between managers’ awareness of appropriate environmentally-friendly practices for hotels, implying a need for training and increased awareness of green management. Contribution and/or value-add: The results could guide managers in the implementation of environmentally-friendly practices in an effort to mitigate environmental problems facing the present generation.

Some Aspects of Eco Tourism with View to Montenegro: Overview

Directory of Open Access Journals (Sweden)

Jelisavka Bulatović

2017-09-01

Full Text Available The International Ecotourism Society defines ecotourism as responsible travel to natural areas that conserves the environment and sustains the well-being of local people (Honey, 1999. Thus, Ecotourism has been promoted as a non-consumptive use of nature and as a possible win – win development strategy, especially for underdeveloped areas. It should generate money in an ecologically and socially friendly way than other forms of land exploitation (Edwards et al., 1998. This article points to some aspects of eco-tourism, with emphasis on the Montenegro. The country has especially much to offer to nature enthusiasts.

Modelling Of Eco-innovation Diffusion: The EU Eco-label

Directory of Open Access Journals (Sweden)

KIJEK TOMASZ

2015-03-01

Full Text Available The aim of this article is to carry out a theoretical and empirical analysis of the process of eco-label diffusion. Eco-labels allow consumers to identify products and services that have a reduced environmental impact during their life cycle. Thus, they are aimed at diminishing the information gap between sellers and buyers. The results of the estimation using the Bass model indicate that the diffusion of the EU eco-label has been most dynamic in countries such as Hungary, Poland, Denmark, Germany and France. In turn, the scope of diffusion (absolute saturation level reached the highest value for companies in France and Italy. In addition, the results of the study confirm the stimulating impact of the scope of eco-label diffusion on consumer awareness of environmental issues. This finding points to the need for environmental education among consumers, which could in turn encourage firms to undertake pro-environmental actions.

Eco-innovation an evolution of innovation? Empirical analysis at the Spanish tile ceramic industry; Eco-innovacion, una evolucion de la innovacion? Analisis empirico en la industria ceramica espanola

Energy Technology Data Exchange (ETDEWEB)

Segarra-Ona, M.; Peiro-Signes, A.; Miret-Pastor, L.; Albors-Garrigos, J.

2011-07-01

Innovation and sustainable development are considered to be economic drivers and crucial in fixing competitive position of companies. Eco-innovation, known as a synergic relation among both concepts must be an element to consider when designing the company's strategy. The objective of this paper is to analyze which are the variables that determine that innovative companies go beyond and consider the improvement of their environmental impact as an output when developing innovating activities. This research considers firms belonging to the Spanish tile industry. Data has been provided by PITEC Database. The paper identifies the moderating factors that influence the eco-innovative behavior of firms. (Author)

The Network Configuration of an Object Relational Database Management System

Science.gov (United States)

Diaz, Philip; Harris, W. C.

2000-01-01

The networking and implementation of the Oracle Database Management System (ODBMS) requires developers to have knowledge of the UNIX operating system as well as all the features of the Oracle Server. The server is an object relational database management system (DBMS). By using distributed processing, processes are split up between the database server and client application programs. The DBMS handles all the responsibilities of the server. The workstations running the database application concentrate on the interpretation and display of data.

How to Make Financial Aid "Freshman-Friendly"

Science.gov (United States)

Pugh, Susan L.; Johnson, David B.

2011-01-01

Ultimately, making financial aid "freshman friendly" also makes financial aid "sophomore friendly," "junior friendly," and "senior friendly." Indiana University has in place an Office of Enrollment Management (OEM) model that includes focused financial aid packaging strategies complemented by unique contact…

From document to database: modernizing requirements management

International Nuclear Information System (INIS)

Giajnorio, J.; Hamilton, S.

2007-01-01

The creation, communication, and management of design requirements are central to the successful completion of any large engineering project, both technically and commercially. Design requirements in the Canadian nuclear industry are typically numbered lists in multiple documents created using word processing software. As an alternative, GE Nuclear Products implemented a central requirements management database for a major project at Bruce Power. The database configured the off-the-shelf software product, Telelogic Doors, to GE's requirements structure. This paper describes the advantages realized by this scheme. Examples include traceability from customer requirements through to test procedures, concurrent engineering, and automated change history. (author)

Wider participation in the EU Eco Management and Audit Scheme; Das Gemeinschaftssystem der EG-Oeko-Audit-Verordnung oeffnet sich

Energy Technology Data Exchange (ETDEWEB)

Mueller, U. [Institut fuer Management und Umwelt, Augsburg (Germany); Blaha, A.

1998-04-01

Within the framework of the EU Eco Management and Audit Scheme, which addresses primarily industry, member states can make provisions at the national level to permit trade and service firms as well as public enterprises to participate in the scheme. With the ordinance extending the eco audit ordinance which came into force in February 1998, questions of environmental management and environmental auditing are now also becoming interesting for the non-industrial sector in Germany. Unresolved issues concern, for instance, site delimitation, product ecology, and indirect environmental effects. (orig./AKF) [Deutsch] Im Rahmen des EG-Oeko-Audits, das sich in erster Linie an gewerbliche Unternehmen richtet, koennen die Mitgliedslaender im Rahmen nationaler Regelungen Handels- und Dienstleistungsunternehmen sowie oeffentliche Einrichtungen in das Gemeinschaftssystem einbeziehen. Mit der im Februar 1998 in Kraft getretenen Erweiterungsverordnung zum Umweltauditgesetz werden in Deutschland jetzt auch fuer nichtgewerbliche Bereiche Fragen des Umweltmanagements und des Oeko-Audits interessant. Eine Reihe von Fragen ergibt sich, beispielsweise nach der Standortabgrenzung, nach der Produktoekologie und nach den indirekten Umweltauswirkungen. (orig./AKF)

New-generation bar adsorptive microextraction (BAμE) devices for a better eco-user-friendly analytical approach-Application for the determination of antidepressant pharmaceuticals in biological fluids.

Science.gov (United States)

Ide, A H; Nogueira, J M F

2018-05-10

The present contribution aims to design new-generation bar adsorptive microextraction (BAμE) devices that promote an innovative and much better user-friendly analytical approach. The novel BAμE devices were lab-made prepared having smaller dimensions by using flexible nylon-based supports (7.5 × 1.0 mm) coated with convenient sorbents (≈ 0.5 mg). This novel advance allows effective microextraction and back-extraction ('only single liquid desorption step') stages as well as interfacing enhancement with the instrumental systems dedicated for routine analysis. To evaluate the achievements of these improvements, four antidepressant agents (bupropion, citalopram, amitriptyline and trazodone) were used as model compounds in aqueous media combined with liquid chromatography (LC) systems. By using an N-vinylpyrrolidone based-polymer phase good selectivity and efficiency were obtained. Assays performed on 25 mL spiked aqueous samples, yielded average recoveries in between 67.8 ± 12.4% (bupropion) and 88.3 ± 12.1% (citalopram), under optimized experimental conditions. The analytical performance also showed convenient precision (RSD  0.9820). The application of the proposed analytical approach on biological fluids showed negligible matrix effects by using the standard addition methodology. From the data obtained, the new-generation BAμE devices presented herein provide an innovative and robust analytical cycle, are simple to prepare, cost-effective, user-friendly and compatible with the current LC autosampler systems. Furthermore, the novel devices were designed to be disposable and used together with negligible amounts of organic solvents (100 μL) during back-extraction, in compliance with the green analytical chemistry principles. In short, the new-generation BAμE devices showed to be an eco-user-friendly approach for trace analysis of priority compounds in biological fluids and a versatile alternative over other well-stablished sorption

'Eco' For Whom? Envisioning Eco-urbanism in the Sino-Singapore Tianjin Eco-city, China

OpenAIRE

Caprotti, Federico; Springer, Cecilia; Harmer, Nichola

2015-01-01

Eco-cities have attracted international attention from governments, corporations, academics and other actors seeking to use sustainable urban planning to reduce urban environmental impacts. China has devoted significant political will and economic resources to the development of new-build eco-city projects, reflecting the Chinese government's goals to build a 'harmonious society' in which environmental sustainability and social stability are mutually reinforcing. We critically analyse the cas...

ECO: A Framework for Entity Co-Occurrence Exploration with Faceted Navigation

Energy Technology Data Exchange (ETDEWEB)

Halliday, K. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2010-08-20

Even as highly structured databases and semantic knowledge bases become more prevalent, a substantial amount of human knowledge is reported as written prose. Typical textual reports, such as news articles, contain information about entities (people, organizations, and locations) and their relationships. Automatically extracting such relationships from large text corpora is a key component of corporate and government knowledge bases. The primary goal of the ECO project is to develop a scalable framework for extracting and presenting these relationships for exploration using an easily navigable faceted user interface. ECO uses entity co-occurrence relationships to identify related entities. The system aggregates and indexes information on each entity pair, allowing the user to rapidly discover and mine relational information.

Establishment of database system for management of KAERI wastes

International Nuclear Information System (INIS)

Shon, J. S.; Kim, K. J.; Ahn, S. J.

2004-07-01

Radioactive wastes generated by KAERI has various types, nuclides and characteristics. To manage and control these kinds of radioactive wastes, it comes to need systematic management of their records, efficient research and quick statistics. Getting information about radioactive waste generated and stored by KAERI is the basic factor to construct the rapid information system for national cooperation management of radioactive waste. In this study, Radioactive Waste Management Integration System (RAWMIS) was developed. It is is aimed at management of record of radioactive wastes, uplifting the efficiency of management and support WACID(Waste Comprehensive Integration Database System) which is a national radioactive waste integrated safety management system of Korea. The major information of RAWMIS supported by user's requirements is generation, gathering, transfer, treatment, and storage information for solid waste, liquid waste, gas waste and waste related to spent fuel. RAWMIS is composed of database, software (interface between user and database), and software for a manager and it was designed with Client/Server structure. RAWMIS will be a useful tool to analyze radioactive waste management and radiation safety management. Also, this system is developed to share information with associated companies. Moreover, it can be expected to support the technology of research and development for radioactive waste treatment

[Review on enterprises'eco-innovation].

Science.gov (United States)

Liao, Zhong Ju; Huang, Chao

2017-12-01

Eco-innovation is an important way to realize sustainable development. It has the dual positive externality of "knowledge spillover" and "environmental spillover", which has attracted much attention from theory and practice. In order to systematically grasp the current situation of eco-innovation, this study collected the relevant foreign literatures on eco-innovation in the past ten years, and made a systematic review of the definition, characteristics and dimensions of eco-innovation. Focusing on the theory of institutional theory, stakeholder theory and resource-based view, this paper explored the antecedents of eco-innovation. Then, this paper also demonstrated the positive and negative effects of eco-innovation on corporate financial performance, and the meditating and moderating mechanisms between eco-innovation and financial performance. Finally, based on the limitations of existing research, the future research direction was put forward.

Eco-friendly PEG-based controlled release nano-formulations of Mancozeb: Synthesis and bioefficacy evaluation against phytopathogenic fungi Alternaria solani and Sclerotium rolfsii.

Science.gov (United States)

Majumder, Sujan; Shakil, Najam A; Kumar, Jitendra; Banerjee, Tirthankar; Sinha, Parimal; Singh, Braj B; Garg, Parul

2016-12-01

Controlled release (CR) nano-formulations of Mancozeb (manganese-zinc double salt of N,N-bisdithiocarbamic acid), a protective fungicide, have been prepared using laboratory-synthesized poly(ethylene glycols) (PEGs)-based functionalized amphiphilic copolymers without using any surfactants or external additives. The release kinetics of the developed Mancozeb CR formulations were studied and compared with that of commercially available 42% suspension concentrate and 75% wettable powder. Maximum amount of Mancozeb was released on 42nd day for PEG-600 and octyl chain, PEG-1000 and octyl chain, and PEG-600 and hexadecyl chain, on 35th day for PEG-1000 and hexadecyl chain, on 28th day for PEG-1500 and octyl chain, PEG-2000 and octyl chain, PEG-1500 and hexadecyl chain, and PEG-2000 and hexadecyl chain in comparison to both commercial formulations (15th day). The diffusion exponent (n value) of Mancozeb in water ranged from 0.42 to 0.62 in tested formulations. The half-release (t 1/2 ) values ranged from 17.35 to 35.14 days, and the period of optimum availability of Mancozeb ranged from 18.54 to 35.42 days. Further, the in vitro bioefficacy evaluation of developed formulations was done against plant pathogenic fungi Alternaria solani and Sclerotium rolfsii by poison food technique. Effective dose for 50% inhibition in mgL -1 (ED 50 ) values of developed formulations varied from 1.31 to 2.79 mg L -1 for A. solani, and 1.60 to 3.14 mg L -1 for S. rolfsii. The present methodology is simple, economical, and eco-friendly for the development of environment-friendly CR formulations of Mancozeb. These formulations can be used to optimize the release of Mancozeb to achieve disease control for the desired period depending upon the matrix of the polymer used. Importantly, the maximum amount of active ingredient remains available for a reasonable period after application. In addition, the developed CR formulations were found to be suitable for fungicidal applications, allowing

[Eco-efficiency change and its driving factors in Tongling City of Anhui Province].

Science.gov (United States)

Wang, Yi-Chen; Wang, Yuan; Zhu, Xiao-Dong; Wu, Xiao-Qing; Wang, Ke; Ren, Ke-Xiu; Lu, Gen-Fa

2011-02-01

This paper first applied material flow analysis (MFA) to construct three levels of regional eco-efficiency indicators, i.e., regional direct eco-efficiency (RDE), regional total eco-efficiency (RTE), and holistic eco-efficiency (HE), and adopted the newly developed data envelopment analysis (DEA) to evaluate the eco-efficiency of Tongling City during the period of 1990-2008. We also applied Malmquist productivity index (MPI) to explore the eco-efficiency change between two following years and its driving factors. The main results were summarized as 1) though the RDE of Tongling City in 1990-2008 kept an increasing trend, its mean eco-efficiency was not high (close to 0.8 in 80% of the years), being lower than that of the RTE and HE, and 2) the RDE change was closely relevant to the improvement in resource management and the technical input in environmental protection in recent years. In order to further improve the RDE of the City, it would be necessary to raise its eco-efficiency via expanding raw material input, reducing domestic extraction, promoting resources productivity, and taking more measures on environmental protection facilities construction.

Selective and eco-friendly procedures for the synthesis of benzimidazole derivatives. The role of the Er(OTf3 catalyst in the reaction selectivity

Directory of Open Access Journals (Sweden)

Natividad Herrera Cano

2016-11-01

Full Text Available An improved and greener protocol for the synthesis of benzimidazole derivatives, starting from o-phenylenediamine, with different aldehydes is reported. Double-condensation products were selectively obtained when Er(OTf3 was used as the catalyst in the presence of electron-rich aldehydes. Conversely, the formation of mono-condensation products was the preferred path in absence of this catalyst. One of the major advantages of these reactions was the formation of a single product, avoiding extensive isolation and purification of products, which is frequently associated with these reactions.Theoretical calculations helped to understand the different reactivity established for these reactions. Thus, we found that the charge density on the oxygen of the carbonyl group has a significant impact on the reaction pathway. For instance, electron-rich aldehydes better coordinate to the catalyst, which favours the addition of the amine group to the carbonyl group, therefore facilitating the formation of double-condensation products.Reactions with aliphatic or aromatic aldehydes were possible, without using organic solvents and in a one-pot procedure with short reaction time (2–5 min, affording single products in excellent yields (75–99%. This convenient and eco-friendly methodology offers numerous benefits with respect to other protocols reported for similar compounds.

Selective and eco-friendly procedures for the synthesis of benzimidazole derivatives. The role of the Er(OTf)3 catalyst in the reaction selectivity.

Science.gov (United States)

Herrera Cano, Natividad; Uranga, Jorge G; Nardi, Mónica; Procopio, Antonio; Wunderlin, Daniel A; Santiago, Ana N

2016-01-01

An improved and greener protocol for the synthesis of benzimidazole derivatives, starting from o -phenylenediamine, with different aldehydes is reported. Double-condensation products were selectively obtained when Er(OTf) 3 was used as the catalyst in the presence of electron-rich aldehydes. Conversely, the formation of mono-condensation products was the preferred path in absence of this catalyst. One of the major advantages of these reactions was the formation of a single product, avoiding extensive isolation and purification of products, which is frequently associated with these reactions. Theoretical calculations helped to understand the different reactivity established for these reactions. Thus, we found that the charge density on the oxygen of the carbonyl group has a significant impact on the reaction pathway. For instance, electron-rich aldehydes better coordinate to the catalyst, which favours the addition of the amine group to the carbonyl group, therefore facilitating the formation of double-condensation products. Reactions with aliphatic or aromatic aldehydes were possible, without using organic solvents and in a one-pot procedure with short reaction time (2-5 min), affording single products in excellent yields (75-99%). This convenient and eco-friendly methodology offers numerous benefits with respect to other protocols reported for similar compounds.

'Isotopo' a database application for facile analysis and management of mass isotopomer data.

Science.gov (United States)

Ahmed, Zeeshan; Zeeshan, Saman; Huber, Claudia; Hensel, Michael; Schomburg, Dietmar; Münch, Richard; Eylert, Eva; Eisenreich, Wolfgang; Dandekar, Thomas

2014-01-01

The composition of stable-isotope labelled isotopologues/isotopomers in metabolic products can be measured by mass spectrometry and supports the analysis of pathways and fluxes. As a prerequisite, the original mass spectra have to be processed, managed and stored to rapidly calculate, analyse and compare isotopomer enrichments to study, for instance, bacterial metabolism in infection. For such applications, we provide here the database application 'Isotopo'. This software package includes (i) a database to store and process isotopomer data, (ii) a parser to upload and translate different data formats for such data and (iii) an improved application to process and convert signal intensities from mass spectra of (13)C-labelled metabolites such as tertbutyldimethylsilyl-derivatives of amino acids. Relative mass intensities and isotopomer distributions are calculated applying a partial least square method with iterative refinement for high precision data. The data output includes formats such as graphs for overall enrichments in amino acids. The package is user-friendly for easy and robust data management of multiple experiments. The 'Isotopo' software is available at the following web link (section Download): http://spp1316.uni-wuerzburg.de/bioinformatics/isotopo/. The package contains three additional files: software executable setup (installer), one data set file (discussed in this article) and one excel file (which can be used to convert data from excel to '.iso' format). The 'Isotopo' software is compatible only with the Microsoft Windows operating system. http://spp1316.uni-wuerzburg.de/bioinformatics/isotopo/. © The Author(s) 2014. Published by Oxford University Press.

Information Management Tools for Classrooms: Exploring Database Management Systems. Technical Report No. 28.

Science.gov (United States)

Freeman, Carla; And Others

In order to understand how the database software or online database functioned in the overall curricula, the use of database management (DBMs) systems was studied at eight elementary and middle schools through classroom observation and interviews with teachers and administrators, librarians, and students. Three overall areas were addressed:…

A Data Analysis Expert System For Large Established Distributed Databases

Science.gov (United States)

Gnacek, Anne-Marie; An, Y. Kim; Ryan, J. Patrick

1987-05-01

The purpose of this work is to analyze the applicability of artificial intelligence techniques for developing a user-friendly, parallel interface to large isolated, incompatible NASA databases for the purpose of assisting the management decision process. To carry out this work, a survey was conducted to establish the data access requirements of several key NASA user groups. In addition, current NASA database access methods were evaluated. The results of this work are presented in the form of a design for a natural language database interface system, called the Deductively Augmented NASA Management Decision Support System (DANMDS). This design is feasible principally because of recently announced commercial hardware and software product developments which allow cross-vendor compatibility. The goal of the DANMDS system is commensurate with the central dilemma confronting most large companies and institutions in America, the retrieval of information from large, established, incompatible database systems. The DANMDS system implementation would represent a significant first step toward this problem's resolution.

A Database Management Assessment Instrument

Science.gov (United States)

Landry, Jeffrey P.; Pardue, J. Harold; Daigle, Roy; Longenecker, Herbert E., Jr.

2013-01-01

This paper describes an instrument designed for assessing learning outcomes in data management. In addition to assessment of student learning and ABET outcomes, we have also found the instrument to be effective for determining database placement of incoming information systems (IS) graduate students. Each of these three uses is discussed in this…

Development of the severe accident risk information database management system SARD

International Nuclear Information System (INIS)

Ahn, Kwang Il; Kim, Dong Ha

2003-01-01

The main purpose of this report is to introduce essential features and functions of a severe accident risk information management system, SARD (Severe Accident Risk Database Management System) version 1.0, which has been developed in Korea Atomic Energy Research Institute, and database management and data retrieval procedures through the system. The present database management system has powerful capabilities that can store automatically and manage systematically the plant-specific severe accident analysis results for core damage sequences leading to severe accidents, and search intelligently the related severe accident risk information. For that purpose, the present database system mainly takes into account the plant-specific severe accident sequences obtained from the Level 2 Probabilistic Safety Assessments (PSAs), base case analysis results for various severe accident sequences (such as code responses and summary for key-event timings), and related sensitivity analysis results for key input parameters/models employed in the severe accident codes. Accordingly, the present database system can be effectively applied in supporting the Level 2 PSA of similar plants, for fast prediction and intelligent retrieval of the required severe accident risk information for the specific plant whose information was previously stored in the database system, and development of plant-specific severe accident management strategies

Development of the severe accident risk information database management system SARD

Energy Technology Data Exchange (ETDEWEB)

Ahn, Kwang Il; Kim, Dong Ha

2003-01-01

The main purpose of this report is to introduce essential features and functions of a severe accident risk information management system, SARD (Severe Accident Risk Database Management System) version 1.0, which has been developed in Korea Atomic Energy Research Institute, and database management and data retrieval procedures through the system. The present database management system has powerful capabilities that can store automatically and manage systematically the plant-specific severe accident analysis results for core damage sequences leading to severe accidents, and search intelligently the related severe accident risk information. For that purpose, the present database system mainly takes into account the plant-specific severe accident sequences obtained from the Level 2 Probabilistic Safety Assessments (PSAs), base case analysis results for various severe accident sequences (such as code responses and summary for key-event timings), and related sensitivity analysis results for key input parameters/models employed in the severe accident codes. Accordingly, the present database system can be effectively applied in supporting the Level 2 PSA of similar plants, for fast prediction and intelligent retrieval of the required severe accident risk information for the specific plant whose information was previously stored in the database system, and development of plant-specific severe accident management strategies.

Eco-Dimensionality as a Religious Foundation for Sustainability

Directory of Open Access Journals (Sweden)

Susan Power Bratton

2018-03-01

Full Text Available Academics have critiqued the Abrahamic faiths, particularly Christianity, as inadequate to respond to today’s environmental dilemmas due to abstract theological qualities like the concept of a unified or transcendent God. Christianity and Islam are the earth’s most populous religions, however, and they are growing in the global south. A literature review finds that both indigenous and world religions develop strategies for environmental sustainability. Examples include: Amazonian fisheries, Islamic gardens, monastic forest management, Baptist LEED certified buildings, and Christian agrarian stewardship. These cases share a characteristic termed eco-dimensionality, defined as the integrative expression of environmental values, caretaking norms and sustainable practices in all aspects of religion, that recognizes and specifically adapts to keystone environmental processes and ecosystemic or geo-physical diversity. Religious eco-dimensionality incorporates: inventorying biota and ecosystems, recognizing environmental spatial and temporal dynamics at multiple scales, understanding communitarian and anti-communitarian human behaviors, structuring social networks, adopting sustainable technologies, and developing an integrative repertoire of religious symbols, aesthetic endeavors and ceremonies. Eco-dimensionality can evolve to address new issues. Negatively stereotyping faith traditions can inhibit constructive conversations concerning environmental issues and development of religious symbols and practices enhancing eco-dimensionality.

Eco-efficient waste glass recycling: Integrated waste management and green product development through LCA.

Science.gov (United States)

Blengini, Gian Andrea; Busto, Mirko; Fantoni, Moris; Fino, Debora

2012-05-01

As part of the EU Life + NOVEDI project, a new eco-efficient recycling route has been implemented to maximise resources and energy recovery from post-consumer waste glass, through integrated waste management and industrial production. Life cycle assessment (LCA) has been used to identify engineering solutions to sustainability during the development of green building products. The new process and the related LCA are framed within a meaningful case of industrial symbiosis, where multiple waste streams are utilised in a multi-output industrial process. The input is a mix of rejected waste glass from conventional container glass recycling and waste special glass such as monitor glass, bulbs and glass fibres. The green building product is a recycled foam glass (RFG) to be used in high efficiency thermally insulating and lightweight concrete. The environmental gains have been contrasted against induced impacts and improvements have been proposed. Recovered co-products, such as glass fragments/powders, plastics and metals, correspond to environmental gains that are higher than those related to landfill avoidance, whereas the latter is cancelled due to increased transportation distances. In accordance to an eco-efficiency principle, it has been highlighted that recourse to highly energy intensive recycling should be limited to waste that cannot be closed-loop recycled. Copyright © 2011 Elsevier Ltd. All rights reserved.

CONTRIBUTIONS TO THE IMPLEMENTATION OF ENVIRONMENTAL MANAGEMENT SYSTEM WITHIN THE ECO TECHNOLOGIC ORGANIZATION

Directory of Open Access Journals (Sweden)

Gheorghe AMZA

2012-05-01

Full Text Available This paper presents contributions to the implementation of environmental management system within the eco technologic organization. SME type organization's environmental policies highlights the accomplishment of requirements of ISO 19001 standard, regarding pollution prevention, commitment in accordance to the law and if it is documented and can provide a framework for setting environmental objectives and targets. The audit may reveal whether it corresponds to the nature, scale and impact that activities, products and services of the organization have on the environment, or if it is implemented, maintained and communicated to all staff. This paper presents mainly the following: elements of environmental planning process, environmental planning process, place of environmental conservation in the general strategy of the organization

The strategies of local farmers' water management and the eco-hydrological effects of irrigation-drainage engineering systems in world heritage of Honghe Hani Rice Terraces

Science.gov (United States)

Gao, Xuan

2017-04-01

Terraces are built in mountainous regions to provide larger area for cultivation,in which the hydrological and geomorphological processes are impacted by local farmers' water management strategies and are modified by manmade irrigation-drainage engineering systems.The Honghe Hani Rice Terraces is a 1300a history of traditional agricultural landscape that was inscribed in the 2013 World Heritage List.The local farmers had developed systematic water management strategies and built perfect irrigation-drainage engineering systems to adapt the local rainfall pattern and rice farming activities.Through field investigation,interviews,combined with Geographic Information Systems,Remote Sensing images and Global Positioning Systems technology,the water management strategies as well as the irrigation-drainage systems and their impacts on eco-hydrological process were studied,the results indicate:Firstly,the local people created and maintained an unique woodcarving allocating management system of irrigating water over hundreds years,which aids distributing water and natural nutrition to each terrace field evenly,and regularly according to cultivation schedule.Secondly,the management of local people play an essential role in effective irrigation-drainage engineering system.A ditch leader takes charge of managing the ditch of their village,keeping ample amount of irrigation water,repairing broken parts of ditches,dealing with unfair water using issues,and so on.Meanwhile,some traditional leaders of minority also take part in.Thus, this traditional way of irrigation-drainage engineering has bringed Hani people around 1300 years of rice harvest for its eco-hydrological effects.Lastly we discuss the future of Honghe Hani Rice Terraces,the traditional cultivation pattern has been influenced by the rapid development of modern civilization,in which some related changes such as the new equipment of county roads and plastic channels and the water overusing by tourism are not totally

Establishment of an eco-compensation fund based on eco-services consumption.

Science.gov (United States)

Liu, Moucheng; Yang, Lun; Min, Qingwen

2018-04-01

Eco-compensation is a type of institutional arrangement that uses economic measures to adjust the relationships among stakeholders in order to conserve and/or sustainably use ecosystem services. The externality of the value of ecosystem services is one of the theoretical bases for eco-compensation. Different types of ecosystem services are consumed by people from different regions. Some are consumed by people living where the services originate, while some are carried by rivers, wind, vehicles or other natural or manmade means to other areas. Thus, the flow and consumption of ecosystem services should be seen as the basis for establishing eco-compensation funds. This paper uses satellite images of the Zhang-Cheng area near Beijing in 2013 to discuss how to establish an eco-compensation fund for stakeholders in this area. Firstly, six important types of ecosystem services in the Zhang-Cheng area were identified based on ecological function zoning, and the value of these ecosystem services was calculated based on ecological pricing methods. Secondly, the field intensity model from physics was used to analyze where Zhang-Cheng area ecosystem services flowed and calculate how much of these services were used by other areas. Thirdly, based on this analysis and calculation, the paper proposes the rates that different stakeholders should invest in the eco-compensation fund, based on their consumption of eco-services. Copyright © 2018 Elsevier Ltd. All rights reserved.

Printed environmentally friendly supercapacitors with ionic liquid electrolytes on paper

Science.gov (United States)

Pettersson, F.; Keskinen, J.; Remonen, T.; von Hertzen, L.; Jansson, E.; Tappura, K.; Zhang, Y.; Wilén, C.-E.; Österbacka, R.

2014-12-01

Environmentally friendly supercapacitors are fabricated using commercial grade aluminum coated paper as a substrate and symmetrical activated carbon electrodes as large area electrodes. Different choline chloride-based eutectic solvents are used as electrolyte. These are inexpensive, environmentally friendly and have a larger operating window compared to that of water electrolytes. As the entire device is printed and the materials used are inexpensive, both small- and large-area power sources can be fabricated to be used in cheap, disposable and recyclable devices. Supercapacitors with different eutectic solvents are measured using cyclic charge-discharge and impedance spectroscopy measurements and compared to one widely used and one "green" imidazolium ionic liquid; EMIM:TFSI and EcoEng 212™, respectively. A mixture of ethylene glycol and choline chloride, Glyceline™, show the highest capacitance and power densities of the electrolytes being tested, including the imidazolium alternatives.

On eco-efficient technologies to minimize industrial water consumption

Science.gov (United States)

Amiri, Mohammad C.; Mohammadifard, Hossein; Ghaffari, Ghasem

2016-07-01

Purpose - Water scarcity will further stress on available water systems and decrease the security of water in many areas. Therefore, innovative methods to minimize industrial water usage and waste production are of paramount importance in the process of extending fresh water resources and happen to be the main life support systems in many arid regions of the world. This paper demonstrates that there are good opportunities for many industries to save water and decrease waste water in softening process by substituting traditional with echo-friendly methods. The patented puffing method is an eco-efficient and viable technology for water saving and waste reduction in lime softening process. Design/methodology/approach - Lime softening process (LSP) is a very sensitive process to chemical reactions. In addition, optimal monitoring not only results in minimizing sludge that must be disposed of but also it reduces the operating costs of water conditioning. Weakness of the current (regular) control of LSP based on chemical analysis has been demonstrated experimentally and compared with the eco-efficient puffing method. Findings - This paper demonstrates that there is a good opportunity for many industries to save water and decrease waste water in softening process by substituting traditional method with puffing method, a patented eco-efficient technology. Originality/value - Details of the required innovative works to minimize industrial water usage and waste production are outlined in this paper. Employing the novel puffing method for monitoring of lime softening process results in saving a considerable amount of water while reducing chemical sludge.

Eco-friendly dry chemo-mechanical pretreatments of lignocellulosic biomass: Impact on energy and yield of the enzymatic hydrolysis

International Nuclear Information System (INIS)

Barakat, Abdellatif; Chuetor, Santi; Monlau, Florian; Solhy, Abderrahim; Rouau, Xavier

2014-01-01

Highlights: • Innovative dry NaOH chemo-mechanical pretreatment was developed. • Dry (TS dry ) and dilute (TS dilute ) NaOH chemo-mechanical pretreatment were compared. • TS dilute consumed higher amounts of water and energy compared to TS dry . • Energy efficiency obtained for TS dilute was 0.417 kg glucose kW h −1 and 0.888 for TS dry . - Abstract: In this study, we developed an eco-friendly dry alkaline chemomechanical pretreatment of wheat straw without production of waste and liquid fractions with objective to save energy input, to decrease the environmental impact and to increase enzymatic hydrolysis. Wheat straw was pretreated with NH 3 , NaOH-H 2 O 2 , NH 3 -H 2 O 2 and NaOH at high materials concentration (5 kg/L) equivalent to biomass/liquid ratio of 1/5 (dry chemomechanical) and at low materials concentration (0.2 kg/L) equivalent to biomass/liquid ratio of 5/1 (dilute chemomechanical). Untreated and chemical treated wheat straw samples were subjected to grinding and milling following by enzymatic hydrolysis with commercial cellulases. NaOH and NaOH-H 2 O 2 dry chemomechanical pretreatments were found to be more effective in decreasing the particle size and energy consumption and increasing the surface area. However, alkaline dilute-chemomechanical treatments consumed higher amounts of water (5 L water/1 kg biomass) and energy compared to dry-chemomechanical treatments. In point of fact, the lowest energy efficiency obtained was 0.417 kg glucose kW h −1 for dilute-chemomechanical treatments compared to 0.888 kg glucose kW h −1 glucose kW h −1 for dry-chemomechanical treatments. Alkaline dry-chemomechanical pretreatments approach appears more attractive and efficient in terms of glucose, energy efficiency and environmental impact, compared to conventional alkaline chemomechanical pretreatments

Development and Validation of Eco-Friendly Liquid Chromatographic and Spectrophotometric Methods for Simultaneous Determination of Coformulated Drugs: Phenylephrine Hydrochloride and Prednisolone Acetate.

Science.gov (United States)

Mostafa, Nadia M; Elsayed, Ghada M; Hassan, Nagiba Y; El Mously, Dina A

2017-11-01

Five simple, sensitive, and eco-friendly LC and UV spectrophotometric methods have been developed for the simultaneous determination of phenylephrine hydrochloride (PHE) and prednisolone acetate (PRD) in their combined dosage form. The first method was reversed-phase (RP) LC using methanol-water-heptane-1-sulfonic acid sodium salt (75 + 25 + 0.1, v/v/w) as a mobile phase. Separation was achieved using an XSelect HSS reversed-phase C18 analytical column (250 × 4.6 mm, 5µm). The flow rate was 1.0 mL/min and UV detection was done at 230 nm. Quantification was achieved over the concentration ranges of 5-50 µg/mL for PHE and 2-90 µg/mL for PRD. Four spectrophotometric methods were proposed, namely dual wavelength, first derivative of ratio spectra, ratio difference, and mean-centering of ratio spectra. Linearity was observed in the concentration ranges of 10-120 and 5-35 µg/mL for PHE and PRD, respectively, for the spectrophotometric methods. Green solvents were used in the proposed methods because they play a vital role in the analytical methods' influence on the environment. The suggested methods were validated regarding linearity, accuracy, and precision according to the International Conference on Harmonization guidelines, with satisfactory results. These methods could be used as harmless substitutes for routine analysis of the mentioned drugs, with no interference from excipients.

Fabrication of CMC-g-PAM superporous polymer monoliths via eco-friendly Pickering-MIPEs for superior adsorption of methyl violet and methylene blue

Science.gov (United States)

Wang, Feng; Zhu, Yongfeng; Wang, Wenbo; Zong, Li; Lu, Taotao; Wang, Aiqin

2017-06-01

A series of superporous carboxymethylcellulose-graft-poly(acrylamide) (CMC-g-PAM) polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM) in the oil-in-water (O/W) Pickering-medium internal phase emulsions (Pickering-MIPEs) composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20) on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9-14% and 3%, respectively. The porous monolith can rapidly adsorb 1585 mg/g of methyl violet (MV) and 1625 mg/g of methylene blue (MB). After the monolith was regenerated by adsorption-desorption process for 5 times, the adsorption capacities still reached 92.1% (for MV) and 93.5% (for MB) of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontimination of dye-containing wastewater.

GiSAO.db: a database for ageing research

Directory of Open Access Journals (Sweden)

Grillari Johannes

2011-05-01

Full Text Available Abstract Background Age-related gene expression patterns of Homo sapiens as well as of model organisms such as Mus musculus, Saccharomyces cerevisiae, Caenorhabditis elegans and Drosophila melanogaster are a basis for understanding the genetic mechanisms of ageing. For an effective analysis and interpretation of expression profiles it is necessary to store and manage huge amounts of data in an organized way, so that these data can be accessed and processed easily. Description GiSAO.db (Genes involved in senescence, apoptosis and oxidative stress database is a web-based database system for storing and retrieving ageing-related experimental data. Expression data of genes and miRNAs, annotation data like gene identifiers and GO terms, orthologs data and data of follow-up experiments are stored in the database. A user-friendly web application provides access to the stored data. KEGG pathways were incorporated and links to external databases augment the information in GiSAO.db. Search functions facilitate retrieval of data which can also be exported for further processing. Conclusions We have developed a centralized database that is very well suited for the management of data for ageing research. The database can be accessed at https://gisao.genome.tugraz.at and all the stored data can be viewed with a guest account.

Interconnecting heterogeneous database management systems

Science.gov (United States)

Gligor, V. D.; Luckenbaugh, G. L.

1984-01-01

It is pointed out that there is still a great need for the development of improved communication between remote, heterogeneous database management systems (DBMS). Problems regarding the effective communication between distributed DBMSs are primarily related to significant differences between local data managers, local data models and representations, and local transaction managers. A system of interconnected DBMSs which exhibit such differences is called a network of distributed, heterogeneous DBMSs. In order to achieve effective interconnection of remote, heterogeneous DBMSs, the users must have uniform, integrated access to the different DBMs. The present investigation is mainly concerned with an analysis of the existing approaches to interconnecting heterogeneous DBMSs, taking into account four experimental DBMS projects.

Orientating eco-efficiency analysis. A tool for strategy assessment in communal waste management; Orientierende Oekoeffizienzanalyse. Ein Instrument zur Strategiebewertung in der kommunalen Abfallwirtschaft

Energy Technology Data Exchange (ETDEWEB)

Woebbeking, Karl H.; Davis, Jennifer [Fachhochschule Mainz - Univ. of Applied Sciences (Germany). Forschungsgruppe Kommunal-/Umweltwirtschaft

2012-11-01

The model project is to provide a practicable controlling tool for communal waste management utilities which will enable them to reassess their strategies with regard to their economic and ecological goals. As a result of this orientating eco-efficiency analysis, an eco-efficiency portfolio is obtained which shows the interdependences of cost and environmental effects. (orig.) [German] Unser Modellprojekt hat zum Ziel, kommunalen Abfallwirtschaftsbetrieben ein praktikables Controllinginstrument zur Verfuegung zu stellen, mit dem sie ihre strategische Ausrichtung hinsichtlich oekonomischer und oekologischer Zielerreichung pruefen koennen. Ergebnis unserer orientierenden Oekoffizienzanalyse is ein Oekoeffizienzportfolio, in dem die wechselseitigen Abhaengigkeiten von Kosten und Umweltwirkungen dargestellt werden. (orig.)

Family Physicians Managing Medical Requests From Family and Friends.

Science.gov (United States)

Giroldi, Esther; Freeth, Robin; Hanssen, Maurice; Muris, Jean W M; Kay, Margareth; Cals, Jochen W L

2018-01-01

Although guidelines generally state that physicians should not treat their family members or friends (nonpatients), physicians regularly receive medical requests from nonpatients. We aimed to explore junior and senior family physicians' experiences with and attitudes toward managing medical requests from nonpatients. We conducted a qualitative study with 7 focus groups with junior and senior physicians. We performed a thematic analysis during an iterative cycle of data collection and analysis. When confronted with a medical request from a nonpatient, physicians first oriented themselves to the situation: who is this person, what is he or she asking of me, and where are we? Physicians next considered the following interrelated factors: (1) nature/strength of the relationship with the nonpatient, (2) amount of trust in his/her own knowledge and skills, (3) expected consequences of making mistakes, (4) importance of work-life balance, and (5) risk of disturbing the physician-patient process. Senior physicians applied more nuanced considerations when deciding whether to respond, whereas junior physicians experienced more difficulties dealing with these requests, were less inclined to respond, and were more concerned about disturbing the existing relationship that a person had with his/her own physician. This study provides insight into the complexity that physicians face when managing medical questions and requests from nonpatients. Facilitated group discussions during which experiences are shared can help junior physicians become more confident in dealing with these complex issues as they formulate their own personal strategy regarding provision of medical advice or treatment to family and friends. © 2018 Annals of Family Medicine, Inc.

Fish-friendly prophylaxis/disinfection in aquaculture: Low concentration of peracetic acid is stress-free to the carp (Cyprinus carpio) after repeated applications

Science.gov (United States)

Application of peracetic acid (PAA) at low concentrations has been proved to be a broad functional and eco-friendly prophylaxis/disinfection method against various fish pathogens. Therefore, regular applications of low concentration PAA is sufficient to control (potential) pathogens in recirculatin...

Identifying Regional Key Eco-Space to Maintain Ecological Security Using GIS

Directory of Open Access Journals (Sweden)

Hualin Xie

2014-02-01

Full Text Available Ecological security and environmental sustainability are the foundations of sustainable development. With the acceleration of urbanization, increasing human activities have promoted greater impacts on the eco-spaces that maintain ecological security. Regional key eco-space has become the primary need to maintain environmental sustainability and can offer society with continued ecosystem services. In this paper, considering the security of water resources, biodiversity conservation, disaster avoidance and protection and natural recreation, an integrated index of eco-space importance was established and a method for identifying key eco-space was created using GIS, with Lanzhou City, China as a case study. The results show that the area of core eco-space in the Lanzhou City is approximately 50,908.7 hm2, accounting for 40% of the region’s total area. These areas mainly consist of geological hazard protection zones and the core zones of regional river systems, wetlands, nature reserves, forest parks and scenic spots. The results of this study provide some guidance for the management of ecological security, ecological restoration and environmental sustainability.

Influence of friends on children's physical activity: a review.

Science.gov (United States)

Maturo, Claire C; Cunningham, Solveig A

2013-07-01

We examined evidence for friendship influences on children's physical activity (PA) through systematic searches of online databases in May 2012. We identified 106 studies (25 qualitative) published in English since 2000 that analyzed indicators of friendship influences (e.g., communication about PA, friends' PA, and PA with friends) among persons younger than 19 years. Children's PA was positively associated with encouragement from friends (43 of 55 studies indicating a positive relationship), friends' own PA (30/35), and engagement with friends in PA (9/10). These findings are consistent with friends influencing PA, but most studies did not isolate influence from other factors that could explain similarity. Understanding friendship influences in childhood can facilitate the promotion of lifelong healthy habits. PA with friends should be considered in health promotion programs.

Eco-friendly and biocompatible cross-linked carboxymethylcellulose hydrogels as adsorbents for the removal of organic dye pollutants for environmental applications.

Science.gov (United States)

Capanema, Nádia S V; Mansur, Alexandra A P; Mansur, Herman S; de Jesus, Anderson C; Carvalho, Sandhra M; Chagas, Poliane; de Oliveira, Luiz C

2017-08-28

In this study, new eco-friendly hydrogel adsorbents were synthesized based on carboxymethylcellulose (CMC, degree of substitution [DS] = 0.7) chemically cross-linked with citric acid (CA) using a green process in aqueous solution and applied for the adsorption of methylene blue (MB). Spectroscopic analyses demonstrated the mechanism of cross-linking through the reaction of hydroxyl functional groups from CMC with CA. These CMC hydrogels showed very distinct morphological features dependent on the extension of cross-linking and their nanomechanical properties were drastically increased by approximately 300% after cross-linking with 20% CA (e.g. elastic moduli from 80 ± 15 to 270 ± 50 MPa). Moreover, they were biocompatible using an in vitro cell viability assay in contact with human osteosarcoma-derived cells (SAOS) for 24 h. These CMC-based hydrogels exhibited adsorption efficiency above 90% (24 h) and maximum removal capacity of MB from 5 to 25 mg g -1 depending on the dye concentration (from 100 to 500 mg L -1 ), which was used as the model cationic organic pollutant. The adsorption of process of MB was well-fit to the pseudo-second-order kinetics model. The desorption of MB by immersion in KCl solution (3 mol L -1 , 24 h) showed a typical recovery efficiency of over 60% with conceivable reuse of these CMC-based hydrogels. Conversely, CMC hydrogels repelled methyl orange dye used as model anionic pollutant, proving the mechanism of adsorption by the formation of charged polyelectrolyte/dye complexes.

Kingfisher: a system for remote sensing image database management

Science.gov (United States)

Bruzzo, Michele; Giordano, Ferdinando; Dellepiane, Silvana G.

2003-04-01

At present retrieval methods in remote sensing image database are mainly based on spatial-temporal information. The increasing amount of images to be collected by the ground station of earth observing systems emphasizes the need for database management with intelligent data retrieval capabilities. The purpose of the proposed method is to realize a new content based retrieval system for remote sensing images database with an innovative search tool based on image similarity. This methodology is quite innovative for this application, at present many systems exist for photographic images, as for example QBIC and IKONA, but they are not able to extract and describe properly remote image content. The target database is set by an archive of images originated from an X-SAR sensor (spaceborne mission, 1994). The best content descriptors, mainly texture parameters, guarantees high retrieval performances and can be extracted without losses independently of image resolution. The latter property allows DBMS (Database Management System) to process low amount of information, as in the case of quick-look images, improving time performance and memory access without reducing retrieval accuracy. The matching technique has been designed to enable image management (database population and retrieval) independently of dimensions (width and height). Local and global content descriptors are compared, during retrieval phase, with the query image and results seem to be very encouraging.

International database on ageing management and life extension

International Nuclear Information System (INIS)

Ianko, L.; Lyssakov, V.; McLachlan, D.; Russell, J.; Mukhametshin, V.

1995-01-01

International database on ageing management and life extension for reactor pressure vessel materials (RPVM) is described with the emphasis on the following issues: requirements of the system; design concepts for RPVM database system; data collection, processing and storage; information retrieval and dissemination; RPVM information assessment and evaluation. 1 fig

Nuclear data processing using a database management system

International Nuclear Information System (INIS)

Castilla, V.; Gonzalez, L.

1991-01-01

A database management system that permits the design of relational models was used to create an integrated database with experimental and evaluated nuclear data.A system that reduces the time and cost of processing was created for computers type EC or compatibles.A set of programs for the conversion from nuclear calculated data output format to EXFOR format was developed.A dictionary to perform a retrospective search in the ENDF database was created too

A New System of Automated Eco-genetic Database and Modern Conception of Prognosis of Bronchial Asthma

National Research Council Canada - National Science Library

Karseladze, Rusudan; Lia, Zhorzholiani; Goderdzishvili, Liza

2004-01-01

.... There is a need for an integrative study of the eco-genetic characteristics of BA. However, a unified assessment system for the cumulative impact of ecological and endogenous factors in BA does not yet exist...

Report of the SRC working party on databases and database management systems

International Nuclear Information System (INIS)

Crennell, K.M.

1980-10-01

An SRC working party, set up to consider the subject of support for databases within the SRC, were asked to identify interested individuals and user communities, establish which features of database management systems they felt were desirable, arrange demonstrations of possible systems and then make recommendations for systems, funding and likely manpower requirements. This report describes the activities and lists the recommendations of the working party and contains a list of databses maintained or proposed by those who replied to a questionnaire. (author)

Customer-Oriented and Eco-friendly Networks for Health Fashionable Goods – The CoReNet Approach

OpenAIRE

Azevedo , Américo; Bastos , João; Almeida , António; Soares , Carlos; Magaletti , Nicola; Grosso , Enrico ,; Stellmach , Dieter; Winkler , Marcus; Fornasiero , Rosanna; Zangiacomi , Andrea; Chiodi , Andrea

2011-01-01

Part 3: Value Chain for Enhancing Collaborative Networks; International audience; The design, production and distribution of small series of health fashionable goods for specific target groups of wide impact in terms of market for the European industry as elderly, disables, diabetics and obese people represents a challenging opportunity for European companies which are asked to supply the demand with affordable price and eco-compatible products. Added to this challenge, textile, clothing and ...

Preparation of Biocolorant and Eco-Dyeing Derived from Polyphenols Based on Laccase-Catalyzed Oxidative Polymerization

Directory of Open Access Journals (Sweden)

Fubang Wang

2018-02-01

Full Text Available Natural products have been believed to be a promising source to obtain ecological dyes and pigments. Plant polyphenol is a kind of significant natural compound, and tea provides a rich source of polyphenols. In this study, biocolorant derived from phenolic compounds was generated based on laccase-catalyzed oxidative polymerization, and eco-dyeing of silk and wool fabrics with pigments derived from tea was investigated under the influence of pH variation. This work demonstrated that the dyeing property was better under acidic conditions compared to alkalinity, and fixation rate was the best when pH value was 3. Furthermore, breaking strength of dyed fabrics sharply reduced under the condition of pH 11. Eventually, the dyeing method was an eco-friendly process, which was based on bioconversion, and no mordant was added during the process of dyeing.

Managing Multiuser Database Buffers Using Data Mining Techniques

NARCIS (Netherlands)

Feng, L.; Lu, H.J.

2004-01-01

In this paper, we propose a data-mining-based approach to public buffer management for a multiuser database system, where database buffers are organized into two areas – public and private. While the private buffer areas contain pages to be updated by particular users, the public

A Product Line Analysis for Eco-Designed Fashion Products: Evidence from an Outdoor Sportswear Brand

Directory of Open Access Journals (Sweden)

Luo Wang

2017-07-01

Full Text Available With the increasing awareness of sustainability, eco-design has been an important trend in the fashion industry. Many fashion brands such as Nike, Adidas, and The North Face have developed sustainable fashion by incorporating eco-design elements. Eco-design is an important part of sustainable supply chains. In this paper, we conducted a product line analysis of eco-designed products from a famous outdoor sportswear brand, Patagonia. We collected Patagonia’s 2017 Spring Season product line data and analyzed the data through descriptive analysis, factor analysis and correlation analysis. We found that Patagonia mainly uses organic, recycled, and traceable materials in their eco-product line development. We identified that the usage of eco-materials may significantly affect the number of color choices and product weight as well as gender difference, pattern design, product fit and online reviewers’ opinions at Patagonia. We argued that Patagonia should focus on functionality more than aesthetics in eco-design. We discussed how sustainable fashion firms should manage eco-design in the supply chain.

A user's manual for managing database system of tensile property

International Nuclear Information System (INIS)

Ryu, Woo Seok; Park, S. J.; Kim, D. H.; Jun, I.

2003-06-01

This manual is written for the management and maintenance of the tensile database system for managing the tensile property test data. The data base constructed the data produced from tensile property test can increase the application of test results. Also, we can get easily the basic data from database when we prepare the new experiment and can produce better result by compare the previous data. To develop the database we must analyze and design carefully application and after that, we can offer the best quality to customers various requirements. The tensile database system was developed by internet method using Java, PL/SQL, JSP(Java Server Pages) tool

The Study of Critical Eco-Linguistic in Green Discourse: Prospective Eco-Linguistic Analysis

Directory of Open Access Journals (Sweden)

Tommi Yuniawan

2017-10-01

Full Text Available Eco-linguistic studies are influenced by one of the other interdisciplinary sciences, namely critical discourse analysis. The combination of these two sciences is called critical eco-linguistic studies. Critical eco-linguistic examines the discourse about the environment and various forms of discourse and their ideology which concerns people and the environment. The environmental discourse with all its manifestations (oral text, written text is called green discourse. To that end, critical eco-linguistic dictates the linguistic aspects contained in the green discourse. Utilization of lingual units in green discourse will affect the sense and logic of people involved in the discourse, ie the writers and readers or the speakers and the speakers. What is recorded in their cognition, will affect their attitudes and actions to the environment. If green discourse is constructive, then their attitude and actions to the environment are constructive. Conversely, if green discourse is more destructive and exploitative, then their attitudes and actions towards the environment will also be affected towards destruction and exploitation. For this reason, critical eco-linguistic studies in green discourse deserve to be given space as a form of prospective eco-linguistic analysis.

Design of Eco Friendly Shallow Draft Fishing Vessel

Directory of Open Access Journals (Sweden)

Sunardi Sunardi

2016-04-01

Full Text Available One of the main problem of inland waterways fisheries is the transportation of fish from ponds to fish market during low tide trough inland waterways with 0.6m water depth.The boat is experiences grounding due to water depth of the river is not sufficient for the fishing boat to carry fish at it’s maximum2 tones capacity or experience dead freight . This condition forces fisherman to wait until the high tide from the sea, this delay causes the quality of the fish is decreasing.Besides the problem dead freight  problem the existing vessel is causes environmental problem such as erosion of the river bank due to wake wash. The other important issue is the increases of fuel price and it’s scarcity.  This paper presents the results of comparison of existing monohull fishing boat and two other alternativecatamaran designs. The catamaran design alternatives are is ordinary catamaran and flat side catamaran.  Both of the catamaran fishing boat design shows that the catamaran boat with 0.5m draft is able to carry more than 2 tonnes payload during low tide water depth.  The CFD simulation results shows that flat side catamaran resistance is more than 17.7% lower compared to ordinary catamaran and 44% lower compared to monohull. It means that the consumption of flat side catamaran is lowest compared to two other type of hull design. The flat side catamaran also produces lowest wake wash compared to o two other design. The low wake wash means more friendly to environment.

ECO-FRIENDLY METHODS OF SPEARGRASS (Imperata cylindrica ...

African Journals Online (AJOL)

Choice-Academy

Ethiopian Journal of Environmental Studies and Management. Vol. 1 no.1 March 2008 ... The study was designed to evaluate various control methods that would .... The following data were collected: i. Imperata shoot dry ... (kg/ha at 0 to 30cm soil depth) iii. Cassava ... soil flora and fauna as had been earlier suggested by.

An Introduction to the DB Relational Database Management System

OpenAIRE

Ward, J.R.

1982-01-01

This paper is an introductory guide to using the Db programs to maintain and query a relational database on the UNIX operating system. In the past decade. increasing interest has been shown in the development of relational database management systems. Db is an attempt to incorporate a flexible and powerful relational database system within the user environment presented by the UNIX operating system. The family of Db programs is useful for maintaining a database of information that i...

Ecological network analysis for carbon metabolism of eco-industrial parks: a case study of a typical eco-industrial park in Beijing.

Science.gov (United States)

Lu, Yi; Chen, Bin; Feng, Kuishuang; Hubacek, Klaus

2015-06-16

Energy production and industrial processes are crucial economic sectors accounting for about 62% of greenhouse gas (GHG) emissions globally in 2012. Eco-industrial parks are practical attempts to mitigate GHG emissions through cooperation among businesses and the local community in order to reduce waste and pollution, efficiently share resources, and help with the pursuit of sustainable development. This work developed a framework based on ecological network analysis to trace carbon metabolic processes in eco-industrial parks and applied it to a typical eco-industrial park in Beijing. Our findings show that the entire metabolic system is dominated by supply of primary goods from the external environment and final demand. The more carbon flows through a sector, the more influence it would exert upon the whole system. External environment and energy providers are the most active and dominating part of the carbon metabolic system, which should be the first target to mitigate emissions by increasing efficiencies. The carbon metabolism of the eco-industrial park can be seen as an evolutionary system with high levels of efficiency, but this may come at the expense of larger levels of resilience. This work may provide a useful modeling framework for low-carbon design and management of industrial parks.

Development of Krsko Severe Accident Management Database (SAMD)

International Nuclear Information System (INIS)

Basic, I.; Kocnar, R.

1996-01-01

Severe Accident Management is a framework to identify and implement the Emergency Response Capabilities that can be used to prevent or mitigate severe accidents and their consequences. Krsko Severe Accident Management Database documents the severe accident management activities which are developed in the NPP Krsko, based on the Krsko IPE (Individual Plant Examination) insights and Generic WOG SAMGs (Westinghouse Owners Group Severe Accident Management Guidance). (author)

Exceedingly biocompatible and thin-layered reduced graphene oxide nanosheets using an eco-friendly mushroom extract strategy

Directory of Open Access Journals (Sweden)

Muthoosamy K

2015-02-01

highly biocompatible to not only colon (HT-29 and brain (U87MG cancer cells, but was also viable towards normal cells (MRC-5. Conclusion: Besides being eco-friendly, this mushroom based approach is easily scalable and demonstrates remarkable RGO stability and biocompatibility, even without any form of functionalization. Keywords: extraction, Ganoderma, RGO, ultrasound

Managing Database Services: An Approach Based in Information Technology Services Availabilty and Continuity Management

Directory of Open Access Journals (Sweden)

Leonardo Bastos Pontes

2017-01-01

Full Text Available This paper is held in the information technology services management environment, with a few ideas of information technology governance, and purposes to implement a hybrid model to manage the services of a database, based on the principles of information technology services management in a supplementary health operator. This approach utilizes fundamental nuances of services management guides, such as CMMI for Services, COBIT, ISO 20000, ITIL and MPS.BR for Services; it studies harmonically Availability and Continuity Management, as most part of the guides also do. This work has its importance because it keeps a good flow in the database and improves the agility of the systems in the accredited clinics in the health plan.

SPIRE Data-Base Management System

Science.gov (United States)

Fuechsel, C. F.

1984-01-01

Spacelab Payload Integration and Rocket Experiment (SPIRE) data-base management system (DBMS) based on relational model of data bases. Data bases typically used for engineering and mission analysis tasks and, unlike most commercially available systems, allow data items and data structures stored in forms suitable for direct analytical computation. SPIRE DBMS designed to support data requests from interactive users as well as applications programs.

Design of database management system for 60Co container inspection system

International Nuclear Information System (INIS)

Liu Jinhui; Wu Zhifang

2007-01-01

The function of the database management system has been designed according to the features of cobalt-60 container inspection system. And the software related to the function has been constructed. The database querying and searching are included in the software. The database operation program is constructed based on Microsoft SQL server and Visual C ++ under Windows 2000. The software realizes database querying, image and graph displaying, statistic, report form and its printing, interface designing, etc. The software is powerful and flexible for operation and information querying. And it has been successfully used in the real database management system of cobalt-60 container inspection system. (authors)

The Role of Interaction Patterns with Hybrid Electric Vehicle Eco-Features for Drivers' Eco-Driving Performance.

Science.gov (United States)

Arend, Matthias G; Franke, Thomas

2017-03-01

The objective of the present research was to understand drivers' interaction patterns with hybrid electric vehicles' (HEV) eco-features (electric propulsion, regenerative braking, neutral mode) and their relationship to fuel efficiency and driver characteristics (technical system knowledge, eco-driving motivation). Eco-driving (driving behaviors performed to achieve higher fuel efficiency) has the potential to reduce CO 2 emissions caused by road vehicles. Eco-driving in HEVs is particularly challenging due to the systems' dynamic energy flows. As a result, drivers are likely to show diverse eco-driving behaviors, depending on factors like knowledge and motivation. The eco-features represent an interface for the control of the systems' energy flows. A sample of 121 HEV drivers who had constantly logged their fuel consumption prior to the study participated in an online questionnaire. Drivers' interaction patterns with the eco-features were related to fuel efficiency. A common factor was identified in an exploratory factor analysis, characterizing the intensity of actively dealing with electric energy, which was also related to fuel efficiency. Driver characteristics were not related to this factor, yet they were significant predictors of fuel efficiency. From the perspective of user-energy interaction, the relationship of the aggregated factor to fuel efficiency emphasizes the central role of drivers' perception of and interaction with energy conversions in determining HEV eco-driving success. To arrive at an in-depth understanding of drivers' eco-driving behaviors that can guide interface design, authors of future research should be concerned with the psychological processes that underlie drivers' interaction patterns with eco-features.

A distributed eco-hydrological model and its application

Directory of Open Access Journals (Sweden)

Zong-xue Xu

2017-10-01

Full Text Available Eco-hydrological processes in arid areas are the focus of many hydrological and water resources studies. However, the hydrological cycle and the ecological system have usually been considered separately in most previous studies, and the correlation between the two has not been fully understood. Interdisciplinary research on eco-hydrological processes using multidisciplinary knowledge has been insufficient. In order to quantitatively analyze and evaluate the interaction between the ecosystem and the hydrological cycle, a new kind of eco-hydrological model, the ecology module for a grid-based integrated surface and groundwater model (Eco-GISMOD, is proposed with a two-way coupling approach, which combines the ecological model (EPIC and hydrological model (GISMOD by considering water exchange in the soil layer. Water interaction between different soil layers is simply described through a generalized physical process in various situations. A special method was used to simulate the water exchange between plants and the soil layer, taking into account precipitation, evapotranspiration, infiltration, soil water replenishment, and root water uptake. In order to evaluate the system performance, the Heihe River Basin in northwestern China was selected for a case study. The results show that forests and crops were generally growing well with sufficient water supply, but water shortages, especially in the summer, inhibited the growth of grass and caused grass degradation. This demonstrates that water requirements and water consumption for different kinds of vegetation can be estimated by considering the water-supply rules of Eco-GISMOD, which will be helpful for the planning and management of water resources in the future.

Environmental Implications of Eco-Labeling for Rice Farming Systems

Directory of Open Access Journals (Sweden)

Solhee Kim

2018-04-01

Full Text Available Concerns about climate change have forced countries to strengthen regulations, standards, and certifications related to greenhouse gas emissions. Various policies targeting farm products, such as carbon labeling and the Environmentally-Friendly Agricultural Product Certification (EFAPC for agricultural products, have been implemented in South Korea to reduce greenhouse gas emissions in the agricultural sector. The purpose of this study was to evaluate the implications of the various certification systems for rice farming, including organic farming, non-pesticide farming, and low-pesticide farming. For this study, we constructed a life cycle inventory (LCI of rice farming systems including conventional, low-pesticide, non-pesticide, and organic farming systems in South Korea. Finally, we compared international farming systems in South Korea, the U.S., and the EU. The rice farming systems with eco-labeling certifications have reduced the environmental impacts. The environmental impacts of rice farming by country were highest in the U.S. (100.0, followed by the EU (53.7, and Korea’s conventional (48.6, low-pesticide (35.8, non-pesticide (28.9, and organic (16.7 farming practices. These results may be useful in proliferating and improving the methodology to evaluate eco-labeling and carbon labeling systems.

Eco-feedback for non-consumption

NARCIS (Netherlands)

Lim, V.; Jense, A.; Janmaat, J.; Funk, M.

2014-01-01

Eco-feedback is a strategy to increase awareness of resource use and to encourage conservation. We applied eco-feedback on household food waste with the prospective to increase awareness and explore its impact on food related decision-making. In this paper we present a prototype of an eco-feedback

Seaweed-synthesized silver nanoparticles: an eco-friendly tool in the fight against Plasmodium falciparum and its vector Anopheles stephensi?

Science.gov (United States)

Murugan, Kadarkarai; Samidoss, Christina Mary; Panneerselvam, Chellasamy; Higuchi, Akon; Roni, Mathath; Suresh, Udaiyan; Chandramohan, Balamurugan; Subramaniam, Jayapal; Madhiyazhagan, Pari; Dinesh, Devakumar; Rajaganesh, Rajapandian; Alarfaj, Abdullah A; Nicoletti, Marcello; Kumar, Suresh; Wei, Hui; Canale, Angelo; Mehlhorn, Heinz; Benelli, Giovanni

2015-11-01

Malaria, the most widespread mosquito-borne disease, affects 350-500 million people each year. Eco-friendly control tools against malaria vectors are urgently needed. This research proposed a novel method of plant-mediated synthesis of silver nanoparticles (AgNP) using a cheap seaweed extract of Ulva lactuca, acting as a reducing and capping agent. AgNP were characterized by UV-vis spectrophotometry, Fourier transform infrared (FTIR) spectroscopy, energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The U. lactuca extract and the green-synthesized AgNP were tested against larvae and pupae of the malaria vector Anopheles stephensi. In mosquitocidal assays, LC50 values of U. lactuca extract against A. stephensi larvae and pupae were 18.365 ppm (I instar), 23.948 ppm (II), 29.701 ppm (III), 37.517 ppm (IV), and 43.012 ppm (pupae). LC50 values of AgNP against A. stephensi were 2.111 ppm (I), 3.090 ppm (II), 4.629 ppm (III), 5.261 ppm (IV), and 6.860 ppm (pupae). Smoke toxicity experiments conducted against mosquito adults showed that U. lactuca coils evoked mortality rates comparable to the permethrin-based positive control (66, 51, and 41%, respectively). Furthermore, the antiplasmodial activity of U. lactuca extract and U. lactuca-synthesized AgNP was evaluated against CQ-resistant (CQ-r) and CQ-sensitive (CQ-s) strains of Plasmodium falciparum. Fifty percent inhibitory concentration (IC50) values of U. lactuca were 57.26 μg/ml (CQ-s) and 66.36 μg/ml (CQ-r); U. lactuca-synthesized AgNP IC50 values were 76.33 μg/ml (CQ-s) and 79.13 μg/ml (CQ-r). Overall, our results highlighted out that U. lactuca-synthesized AgNP may be employed to develop newer and safer agents for malaria control.

Eco-friendly biosynthesis and characterization of silver nanoparticles using Tinospora cordifolia (Thunb. Miers and evaluate its antibacterial, antioxidant potential

Directory of Open Access Journals (Sweden)

Kandasamy Selvam

2017-01-01

Full Text Available The present study reports an eco-friendly, rapid and easy method for synthesis of silver nanoparticles (AgNPs using Tinospora cordifolia as a reducing and capping agent. The different factor such as silver nitrate (AgNO3 concentration, fresh weight of T. cordifolia leaf, incubation time, and pH affecting silver reduction was investigated using Response surface methodology based Box–Behnken design (BBD. The optimum conditions were AgNO3 (1.25 mM, incubation time (15 h, Temperature (45 °C and pH (4.5. T. cordifolia leaf extract can reduces silver ions into AgNPs within 30 min after heating the reaction mixture (60 °C as indicated by the developed reddish brown color. The UV-Vis spectrum of AgNPs revealed a characteristic surface plasmon resonance (SPR peak at 430 nm. AgNPs were characterized X-ray diffraction (XRD revealed their crystalline nature and their average size of nanoparticles was 30 nm as determined by using Scherrer's equation. Fourier transform infrared (FTIR spectroscopy affirmed the role of T. cordifolia leaf extract as a reducing and capping agent of silver ions. Scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDS showed spherical shaped and confirming presence of elemental silver. The synthesized AgNPs was found higher antioxidant activity than plant extract by dot plot assay. In addition, antibacterial activity against Staphylococcus sp. (NCBI-Accession: KC688883.1 and Klebsiella sp. (NCBI-Accession: KF649832.1, showed maximum zone of inhibition of 13 mm and 12.3 mm, respectively, at 10 μg/mL of AgNPs. From the results it is suggested that the synthesized AgNPs showed higher antioxidant and antibacterial activity than the plant extract, thus signification of the present study is the production of biomedical products.

Nuclear database management systems

International Nuclear Information System (INIS)

Stone, C.; Sutton, R.

1996-01-01

The authors are developing software tools for accessing and visualizing nuclear data. MacNuclide was the first software application produced by their group. This application incorporates novel database management and visualization tools into an intuitive interface. The nuclide chart is used to access properties and to display results of searches. Selecting a nuclide in the chart displays a level scheme with tables of basic, radioactive decay, and other properties. All level schemes are interactive, allowing the user to modify the display, move between nuclides, and display entire daughter decay chains

Eco-friendly luminescent solar concentrators with low reabsorption losses and resistance to concentration quenching based on aqueous-solution-processed thiolate-gold nanoclusters

Science.gov (United States)

Huang, H. Y.; Cai, K. B.; Chang, L. Y.; Chen, P. W.; Lin, T. N.; Lin, C. A. J.; Shen, J. L.; Talite, M. J.; Chou, W. C.; Yuan, C. T.

2017-09-01

Heavy-metal-containing quantum dots (QDs) with engineered electronic states have been served as luminophores in luminescent solar concentrators (LSCs) with impressive optical efficiency. Unfortunately, those QDs involve toxic elements and need to be synthesized in a hazardous solvent. Recently, biocompatible, eco-friendly gold nanoclusters (AuNCs), which can be directly synthesized in an aqueous solution, have gained much attention for promising applications in ‘green photonics’. Here, we explored the solid-state photophysical properties of aqueous-solution-processed, glutathione-stabilized gold nanoclusters (GSH-AuNCs) with a ligand-to-metal charge-transfer (LMCT) state for developing ‘green’ LSCs. We found that such GSH-AuNCs exhibit a large Stokes shift with almost no spectral overlap between the optical absorption and PL emission due to the LMCT states, thus, suppressing reabsorption losses. Compared with GSH-AuNCs in solution, the photoluminescence quantum yields (PL-QYs) of the LSCs can be enhanced, accompanied with a lengthened PL lifetime owing to the suppression of non-radiative recombination rates. In addition, the LSCs do not suffer from severe concentration-induced PL quenching, which is a common weakness for conventional luminophores. As a result, a common trade-off between light-harvesting efficiency and solid-state PL-QYs can be bypassed due to nearly-zero spectral overlap integral between the optical absorption and PL emission. We expect that GSH-AuNCs hold great promise for serving as luminophores for ‘green’ LSCs by further enhancing solid-state PL-QYs.

Fabrication of CMC-g-PAM Superporous Polymer Monoliths via Eco-Friendly Pickering-MIPEs for Superior Adsorption of Methyl Violet and Methylene Blue.

Science.gov (United States)

Wang, Feng; Zhu, Yongfeng; Wang, Wenbo; Zong, Li; Lu, Taotao; Wang, Aiqin

2017-01-01

A series of superporous carboxymethylcellulose- graft -poly(acrylamide)/palygorskite (CMC- g -PAM/Pal) polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM) in the oil-in-water (O/W) Pickering-medium internal phase emulsions (Pickering-MIPEs) composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20) on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9-14 and 3%, respectively. The porous monolith can rapidly adsorb 1,585 mg/g of methyl violet (MV) and 1,625 mg/g of methylene blue (MB). After the monolith was regenerated by adsorption-desorption process for five times, the adsorption capacities still reached 92.1% (for MV) and 93.5% (for MB) of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontamination of dye-containing wastewater.

Eco-friendly luminescent solar concentrators with low reabsorption losses and resistance to concentration quenching based on aqueous-solution-processed thiolate-gold nanoclusters.

Science.gov (United States)

Huang, H Y; Cai, K B; Chang, L Y; Chen, P W; Lin, T N; Lin, C A J; Shen, J L; Talite, M J; Chou, W C; Yuan, C T

2017-09-15

Heavy-metal-containing quantum dots (QDs) with engineered electronic states have been served as luminophores in luminescent solar concentrators (LSCs) with impressive optical efficiency. Unfortunately, those QDs involve toxic elements and need to be synthesized in a hazardous solvent. Recently, biocompatible, eco-friendly gold nanoclusters (AuNCs), which can be directly synthesized in an aqueous solution, have gained much attention for promising applications in 'green photonics'. Here, we explored the solid-state photophysical properties of aqueous-solution-processed, glutathione-stabilized gold nanoclusters (GSH-AuNCs) with a ligand-to-metal charge-transfer (LMCT) state for developing 'green' LSCs. We found that such GSH-AuNCs exhibit a large Stokes shift with almost no spectral overlap between the optical absorption and PL emission due to the LMCT states, thus, suppressing reabsorption losses. Compared with GSH-AuNCs in solution, the photoluminescence quantum yields (PL-QYs) of the LSCs can be enhanced, accompanied with a lengthened PL lifetime owing to the suppression of non-radiative recombination rates. In addition, the LSCs do not suffer from severe concentration-induced PL quenching, which is a common weakness for conventional luminophores. As a result, a common trade-off between light-harvesting efficiency and solid-state PL-QYs can be bypassed due to nearly-zero spectral overlap integral between the optical absorption and PL emission. We expect that GSH-AuNCs hold great promise for serving as luminophores for 'green' LSCs by further enhancing solid-state PL-QYs.

Fabrication of CMC-g-PAM Superporous Polymer Monoliths via Eco-Friendly Pickering-MIPEs for Superior Adsorption of Methyl Violet and Methylene Blue

Directory of Open Access Journals (Sweden)

Feng Wang

2017-06-01

Full Text Available A series of superporous carboxymethylcellulose-graft-poly(acrylamide/palygorskite (CMC-g-PAM/Pal polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM in the oil-in-water (O/W Pickering-medium internal phase emulsions (Pickering-MIPEs composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20 on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9–14 and 3%, respectively. The porous monolith can rapidly adsorb 1,585 mg/g of methyl violet (MV and 1,625 mg/g of methylene blue (MB. After the monolith was regenerated by adsorption-desorption process for five times, the adsorption capacities still reached 92.1% (for MV and 93.5% (for MB of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontamination of dye-containing wastewater.

Biomedical waste management in India: Critical appraisal

Science.gov (United States)

Datta, Priya; Mohi, Gursimran Kaur; Chander, Jagdish

2018-01-01

The safe and sustainable management of biomedical waste (BMW) is social and legal responsibility of all people supporting and financing health-care activities. Effective BMW management (BMWM) is mandatory for healthy humans and cleaner environment. This article reviews the recent 2016 BMWM rules, practical problems for its effective implementation, the major drawback of conventional techniques, and the latest eco-friendly methods for BMW disposal. The new rules are meant to improve the segregation, transportation, and disposal methods, to decrease environmental pollution so as to change the dynamic of BMW disposal and treatment in India. For effective disposal of BMWM, there should be a collective teamwork with committed government support in terms of finance and infrastructure development, dedicated health-care workers and health-care facilities, continuous monitoring of BMW practices, tough legislature, and strong regulatory bodies. The basic principle of BMWM is segregation at source and waste reduction. Besides, a lot of research and development need to be in the field of developing environmental friendly medical devices and BMW disposal systems for a greener and cleaner environment. PMID:29403196

Biomedical waste management in India: Critical appraisal.

Science.gov (United States)

Datta, Priya; Mohi, Gursimran Kaur; Chander, Jagdish

2018-01-01

The safe and sustainable management of biomedical waste (BMW) is social and legal responsibility of all people supporting and financing health-care activities. Effective BMW management (BMWM) is mandatory for healthy humans and cleaner environment. This article reviews the recent 2016 BMWM rules, practical problems for its effective implementation, the major drawback of conventional techniques, and the latest eco-friendly methods for BMW disposal. The new rules are meant to improve the segregation, transportation, and disposal methods, to decrease environmental pollution so as to change the dynamic of BMW disposal and treatment in India. For effective disposal of BMWM, there should be a collective teamwork with committed government support in terms of finance and infrastructure development, dedicated health-care workers and health-care facilities, continuous monitoring of BMW practices, tough legislature, and strong regulatory bodies. The basic principle of BMWM is segregation at source and waste reduction. Besides, a lot of research and development need to be in the field of developing environmental friendly medical devices and BMW disposal systems for a greener and cleaner environment.

Synthesis, characterization and evaluation cytotoxic activity of silver nanoparticles synthesized by Chinese herbal Cornus officinalis via environment friendly approach.

Science.gov (United States)

He, Yangqing; Li, Xing; Wang, Ju; Yang, Qian; Yao, Binghua; Zhao, Yingjuan; Zhao, Aiming; Sun, Wenxing; Zhang, Qian

2017-12-01

Cornus officinalis has been widely used as a precious herb and as the tonic food to improve kidney function in China. Its fruits have been used in many traditional Chinese medicine prescriptions to treat kidney diseases, diabetes, cancer and shock. In this study, a new eco-friendly approach for green synthesis of silver nanoparticles (AgNPs) by using the fruits of Cornus officinalis aqueous extract as a reducing and stabilizing agent. The so-synthesized AgNPs showed quasi-spherical in shape with uniform dispersal and an average mean size of 11.7nm. Water soluble biomolecules such as flavonoids and/or anthocyanins from the extract played important roles in the nanoparticles formation. The AgNPs displayed distinctive cytotoxicity activities against human prostate cancer (PC-3) and human liver cancer (HepG2) cell lines. The results provided a low cost, nontoxic and eco-friendly approach for synthesizing metal nanoparticles to explore alternative anticancer agents on the way fighting against cancer in future. Copyright © 2017 Elsevier B.V. All rights reserved.

Forest Ecosystem Services and Eco-Compensation Mechanisms in China

Science.gov (United States)

Deng, Hongbing; Zheng, Peng; Liu, Tianxing; Liu, Xin

2011-12-01

Forests are a major terrestrial ecosystem providing multiple ecosystem services. However, the importance of forests is frequently underestimated from an economic perspective because of the externalities and public good properties of these services. Forest eco-compensation is a transfer mechanism that serves to internalize the externalities of forest ecosystem services by compensating individuals or companies for the losses or costs resulting from the provision of these services. China's current forest eco-compensation system is centered mainly on noncommercial forest. The primary measures associated with ecosystem services are (1) a charge on destructive activities, such as indiscriminate logging, and (2) compensation for individual or local activities and investments in forest conservation. The Compensation Fund System for Forest Ecological Benefits was first listed in the Forest Law of the People's Republic of China in 1998. In 2004, the Central Government Financial Compensation Fund, an important source for the Compensation Fund for Forest Ecological Benefits, was formally established. To improve the forest eco-compensation system, it is crucial to design and establish compensation criteria for noncommercial forests. These criteria should take both theoretical and practical concerns into account, and they should be based on the quantitative valuation of ecosystem services. Although some initial headway has been made on this task, the implementation of an effective forest eco-compensation system in China still has deficiencies and still faces problems. Implementing classification-based and dynamic management for key noncommercial forests and establishing an eco-compensation mechanism with multiple funding sources in the market economy are the key measures needed to conquer these problems and improve the forest eco-compensation system and China's forestry development in sequence.

Forest ecosystem services and eco-compensation mechanisms in China.

Science.gov (United States)

Deng, Hongbing; Zheng, Peng; Liu, Tianxing; Liu, Xin

2011-12-01

Forests are a major terrestrial ecosystem providing multiple ecosystem services. However, the importance of forests is frequently underestimated from an economic perspective because of the externalities and public good properties of these services. Forest eco-compensation is a transfer mechanism that serves to internalize the externalities of forest ecosystem services by compensating individuals or companies for the losses or costs resulting from the provision of these services. China's current forest eco-compensation system is centered mainly on noncommercial forest. The primary measures associated with ecosystem services are (1) a charge on destructive activities, such as indiscriminate logging, and (2) compensation for individual or local activities and investments in forest conservation. The Compensation Fund System for Forest Ecological Benefits was first listed in the Forest Law of the People's Republic of China in 1998. In 2004, the Central Government Financial Compensation Fund, an important source for the Compensation Fund for Forest Ecological Benefits, was formally established. To improve the forest eco-compensation system, it is crucial to design and establish compensation criteria for noncommercial forests. These criteria should take both theoretical and practical concerns into account, and they should be based on the quantitative valuation of ecosystem services. Although some initial headway has been made on this task, the implementation of an effective forest eco-compensation system in China still has deficiencies and still faces problems. Implementing classification-based and dynamic management for key noncommercial forests and establishing an eco-compensation mechanism with multiple funding sources in the market economy are the key measures needed to conquer these problems and improve the forest eco-compensation system and China's forestry development in sequence.

Myconanoparticles: synthesis and their role in phytopathogens management

International Nuclear Information System (INIS)

Alghuthaymi, Mousa A.; Almoammar, Hassan; Rai, Mahindra; Said-Galiev, Ernest; Abd-Elsalam, Kamel A.

2015-01-01

Nanotechnology can offer green and eco-friendly alternatives for plant disease management. Apart from being eco-friendly, fungi are used as bio-manufacturing units, which will provide an added benefit in being easy to use, as compared to other microbes. The non-pathogenic nature of some fungal species in combination with the simplicity of production and handling will improve the mass production of silver nanoparticles. Recently, a diverse range of fungi have been screened for their ability to create silver nanoparticles. Mycosynthesis of gold, silver, gold-silver alloy, selenium, tellurium, platinum, palladium, silica, titania, zirconia, quantum dots, usnic acid, magnetite, cadmium telluride and uraninite nanoparticles has also been reported by various researchers. Nanotechnological application in plant pathology is still in the early stages. For example, nanofungicides, nanopesticides and nanoherbicides are being used extensively in agriculture practices. Remote activation and monitoring of intelligent nano-delivery systems can assist agricultural growers of the future to minimize fungicides and pesticides use. Nanoparticle-mediated gene transfer would be useful for improvement of crops resistant to pathogens and pest. This review critically assesses the role of fungi in the synthesis of nanoparticles, the mechanism involved in the synthesis, the effect of different factors on the reduction of metal ions in developing low-cost techniques for the synthesis and recovery of nanoparticles. Moreover, the application of nanoparticles in plant disease control, antimicrobial mechanisms, and nanotoxicity on plant ecosystem and soil microbial communities has also been discussed in detail. Keywords: disease management; antimicrobial action; phytotoxicity; nanophytopathology

TRENDS: The aeronautical post-test database management system

Science.gov (United States)

Bjorkman, W. S.; Bondi, M. J.

1990-01-01

TRENDS, an engineering-test database operating system developed by NASA to support rotorcraft flight tests, is described. Capabilities and characteristics of the system are presented, with examples of its use in recalling and analyzing rotorcraft flight-test data from a TRENDS database. The importance of system user-friendliness in gaining users' acceptance is stressed, as is the importance of integrating supporting narrative data with numerical data in engineering-test databases. Considerations relevant to the creation and maintenance of flight-test database are discussed and TRENDS' solutions to database management problems are described. Requirements, constraints, and other considerations which led to the system's configuration are discussed and some of the lessons learned during TRENDS' development are presented. Potential applications of TRENDS to a wide range of aeronautical and other engineering tests are identified.

DOE technology information management system database study report

Energy Technology Data Exchange (ETDEWEB)

Widing, M.A.; Blodgett, D.W.; Braun, M.D.; Jusko, M.J.; Keisler, J.M.; Love, R.J.; Robinson, G.L. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.

1994-11-01

To support the missions of the US Department of Energy (DOE) Special Technologies Program, Argonne National Laboratory is defining the requirements for an automated software system that will search electronic databases on technology. This report examines the work done and results to date. Argonne studied existing commercial and government sources of technology databases in five general areas: on-line services, patent database sources, government sources, aerospace technology sources, and general technology sources. First, it conducted a preliminary investigation of these sources to obtain information on the content, cost, frequency of updates, and other aspects of their databases. The Laboratory then performed detailed examinations of at least one source in each area. On this basis, Argonne recommended which databases should be incorporated in DOE`s Technology Information Management System.

Drivers of multidimensional eco-innovation: empirical evidence from the Brazilian industry.

Science.gov (United States)

da Silva Rabêlo, Olivan; de Azevedo Melo, Andrea Sales Soares

2018-03-08

The study analyses the relationships between the main drivers of eco-innovation introduced by innovative industries, focused on cooperation strategy. Eco-innovation is analysed by means of a multidimensional identification strategy, showing the relationships between the independent variables and the variable of interest. The literature discussing environmental innovation is different from the one discussing other types of innovation inasmuch as it seeks to grasp its determinants and to mostly highlight the relevance of environmental regulation. The key feature of this paper is that it ascribes special relevance to cooperation strategy with external partners and to the propensity of innovative industry introducing eco-innovation. A sample of 35,060 Brazilian industries were analysed, between 2003 and 2011, by means of Binomial, Multinomial and Ordinal logistic regressions with microdata collected with the research and innovation department (PINTEC) from the Brazilian Institute of Geography and Statistics (Instituto Brasileiro de Geografia e Estatística). The econometric results estimated by the Logit Multinomial method suggest that the cooperation with external partners practiced by innovative industries facilitates the adoption of eco-innovation in dimension 01 with probability of 64.59%, 57.63% in dimension 02 and 81.02% in dimension 03. The data reveal that the higher the degree of eco-innovation complexity, the harder industries seek to obtain cooperation with external partners. When calculating with the Logit Ordinal and Binomial models, cooperation increases the probability that the industry is eco-innovative in 65.09% and 89.34%, respectively. Environmental regulation and innovation in product and information management were also positively correlated as drivers of eco-innovation.

USING THE ECO CONCEPT FOR SMART HOTEL PROMOTION CASE STUDY: HOTEL VEGA

Directory of Open Access Journals (Sweden)

NEACŞU NICOLETA ANDREEA

2017-11-01

Full Text Available In order to be competitive on the tourism market, hotels adopt different strategies. An intelligent and relatively new strategy that is adopted in the hotel market in Romania is the use of the ECO concept, the goal being to achieve sustainable development and sustainable tourism, involving a series of socio-economic benefits. One of the first accommodation units in Romania to use this strategy is Vega Hotel in Mamaia, a 5* hotel, which was awarded the Eco-Hotel Management System certification by Tuv-Rheinland Romania in the summer of 2009. This paper, through a market research, analyzes the views and attitudes of tourists on the use of the ECO concept in the hospitality industry.

Adolescent friend similarity on alcohol abuse as a function of participation in romantic relationships: Sometimes a new love comes between old friends.

Science.gov (United States)

DeLay, Dawn; Laursen, Brett; Bukowski, William M; Kerr, Margaret; Stattin, Håkan

2016-01-01

This study tests the hypothesis that adolescents with romantic partners are less similar to their friends on rates of alcohol abuse than adolescents without romantic partners. Participants (662 girls, 574 boys) ranging in age from 12 to 19 years nominated friends and romantic partners, and completed a measure of alcohol abuse. In hierarchical linear models, friends with romantic partners were less similar on rates of alcohol abuse than friends without romantic partners, especially if they were older and less accepted. Follow-up longitudinal analyses were conducted on a subsample (266 boys, 374 girls) of adolescents who reported friendships that were stable across 2 consecutive years. Associations between friend reports of alcohol abuse declined after adolescents became involved in a romantic relationship, to the point at which they became more similar to their romantic partners than to their friends. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

Consumption of Eco-Innovative Food: How Values and Attitudes Drive Consumers’ Purchase of Organics?

Directory of Open Access Journals (Sweden)

Marcia Dutra de Barcellos

2015-04-01

Full Text Available Brazilian recent economic growth led to a rising demand for products that must satisfy desires that go beyond basic needs. Following this growth, social and environmental awareness upsurge, increasing demand for sustainable food, and subsequently, an opportunity for companies to add value through innovation in sustainable food products, e.g. to develop innovative ingredients and products (such as organics that provide healthiness for consumers and a sustainable offer for the market. Considering the importance of consumer evaluation for the adoption and success of an innovation, the aim of this paper is to investigate conscious consumption behaviour of organic food in Brazil. In specific, to verify the relationship between personal values, attitudes towards the environment and technology, and attitudes and consumer behaviour towards eco-innovative food. A survey with 401 consumers was held in organic street markets in Porto Alegre. Data was analysed through Structural Equation Modelling. Results indicate that consumers presented strong collectivistic values and very positive attitudes towards environment and nature. These attitudes positively influence the purchase of eco-innovative food. Attitudes towards technological progress negatively influence on its consumption. Theoretically, the hierarchical model is confirmed. This study addressed the consumption of eco-innovative food, in this case, organic food, trying to overtake the gap between attitudes and behaviour.  Public authorities and companies should work to increase consumer awareness and consumption of sustainable food, benefiting society and the natural environment, and must improve communication about the relevance of how technology can act to improve safety and increase the availability of eco-friendly food.

An eco-efficient and economical optimum evaluation technique for the forest road networks: the case of the mountainous forest of Metsovo, Greece.

Science.gov (United States)

Tampekis, Stergios; Samara, Fani; Sakellariou, Stavros; Sfougaris, Athanassios; Christopoulou, Olga

2018-02-12

The sustainable forest management can be achieved only through environmentally sound and economically efficient and feasible forest road networks and transportation systems that can potentially improve the multi-functional use of forest resources. However, road network planning and construction suggest long-term finance that require a capital investment (cash outflow), which would be equal to the value of the total revenue flow (cash inflow) over the whole lifecycle project. This paper emphasizes in an eco-efficient and economical optimum evaluation method for the forest road networks in the mountainous forest of Metsovo, Greece. More specifically, with the use of this technique, we evaluated the forest roads' (a) total construction costs, (b) annual maintenance cost, and (c) log skidding cost. In addition, we estimated the total economic value of forest goods and services that are lost from the forest roads' construction. Finally, we assessed the optimum eco-efficient and economical forest roads densities based on linear equations that stem from the internal rate of return method (IRR) and have been presented graphically. Data analysis and its presentation are achieved with the contribution of geographic information systems (GIS). The technique which is described in this study can be for the decision makers an attractive and useful implement in order to select the most eco-friendly and economical optimum solution to plan forest road network or to evaluate the existing forest transportation systems. Hence, with the use of this method, we can combine not only the multi-objective utilization of natural resources but also the environmental protection of forest ecosystems.

Potentiality of botanical agents for the management of post harvest insects of maize: a review.

Science.gov (United States)

Soujanya, P Lakshmi; Sekhar, J C; Kumar, P; Sunil, N; Prasad, Ch Vara; Mallavadhani, U V

2016-05-01

Natural products derived from plants are emerging as potent biorational alternatives to synthetic insecticides for the integrated management of post harvest insects of maize. In this paper, effectiveness of botanicals including plant extracts, essential oils, their isolated pure compounds, plant based nano formulations and their mode of action against storage insects have been reviewed with special reference to maize. Plant based insecticides found to be the most promising means of controlling storage insects of maize in an eco friendly and sustainable manner. This article also throws light on the commercialization of botanicals, their limitations, challenges and future trends of storage insect management.

MPD3: a useful medicinal plants database for drug designing.

Science.gov (United States)

Mumtaz, Arooj; Ashfaq, Usman Ali; Ul Qamar, Muhammad Tahir; Anwar, Farooq; Gulzar, Faisal; Ali, Muhammad Amjad; Saari, Nazamid; Pervez, Muhammad Tariq

2017-06-01

Medicinal plants are the main natural pools for the discovery and development of new drugs. In the modern era of computer-aided drug designing (CADD), there is need of prompt efforts to design and construct useful database management system that allows proper data storage, retrieval and management with user-friendly interface. An inclusive database having information about classification, activity and ready-to-dock library of medicinal plant's phytochemicals is therefore required to assist the researchers in the field of CADD. The present work was designed to merge activities of phytochemicals from medicinal plants, their targets and literature references into a single comprehensive database named as Medicinal Plants Database for Drug Designing (MPD3). The newly designed online and downloadable MPD3 contains information about more than 5000 phytochemicals from around 1000 medicinal plants with 80 different activities, more than 900 literature references and 200 plus targets. The designed database is deemed to be very useful for the researchers who are engaged in medicinal plants research, CADD and drug discovery/development with ease of operation and increased efficiency. The designed MPD3 is a comprehensive database which provides most of the information related to the medicinal plants at a single platform. MPD3 is freely available at: http://bioinform.info .

ECO-DRIVING MODELING ENVIRONMENT

Science.gov (United States)

2015-11-01

This research project aims to examine the eco-driving modeling capabilities of different traffic modeling tools available and to develop a driver-simulator-based eco-driving modeling tool to evaluate driver behavior and to reliably estimate or measur...

Nuclear power plant reliability database management

International Nuclear Information System (INIS)

Meslin, Th.; Aufort, P.

1996-04-01

In the framework of the development of a probabilistic safety project on site (notion of living PSA), Saint Laurent des Eaux NPP implements a specific EDF reliability database. The main goals of this project at Saint Laurent des Eaux are: to expand risk analysis and to constitute an effective local basis of thinking about operating safety by requiring the participation of all departments of a power plant: analysis of all potential operating transients, unavailability consequences... that means to go further than a simple culture of applying operating rules; to involve nuclear power plant operators in experience feedback and its analysis, especially by following up behaviour of components and of safety functions; to allow plant safety managers to outline their decisions facing safety authorities for notwithstanding, preventive maintenance programme, operating incident evaluation. To hit these goals requires feedback data, tools, techniques and development of skills. The first step is to obtain specific reliability data on the site. Raw data come from plant maintenance management system which processes all maintenance activities and keeps in memory all the records of component failures and maintenance activities. Plant specific reliability data are estimated with a Bayesian model which combines these validated raw data with corporate generic data. This approach allow to provide reliability data for main components modelled in PSA, to check the consistency of the maintenance program (RCM), to verify hypothesis made at the design about component reliability. A number of studies, related to components reliability as well as decision making process of specific incident risk evaluation have been carried out. This paper provides also an overview of the process management set up on site from raw database to specific reliability database in compliance with established corporate objectives. (authors). 4 figs

Nuclear power plant reliability database management

Energy Technology Data Exchange (ETDEWEB)

Meslin, Th [Electricite de France (EDF), 41 - Saint-Laurent-des-Eaux (France); Aufort, P

1996-04-01

In the framework of the development of a probabilistic safety project on site (notion of living PSA), Saint Laurent des Eaux NPP implements a specific EDF reliability database. The main goals of this project at Saint Laurent des Eaux are: to expand risk analysis and to constitute an effective local basis of thinking about operating safety by requiring the participation of all departments of a power plant: analysis of all potential operating transients, unavailability consequences... that means to go further than a simple culture of applying operating rules; to involve nuclear power plant operators in experience feedback and its analysis, especially by following up behaviour of components and of safety functions; to allow plant safety managers to outline their decisions facing safety authorities for notwithstanding, preventive maintenance programme, operating incident evaluation. To hit these goals requires feedback data, tools, techniques and development of skills. The first step is to obtain specific reliability data on the site. Raw data come from plant maintenance management system which processes all maintenance activities and keeps in memory all the records of component failures and maintenance activities. Plant specific reliability data are estimated with a Bayesian model which combines these validated raw data with corporate generic data. This approach allow to provide reliability data for main components modelled in PSA, to check the consistency of the maintenance program (RCM), to verify hypothesis made at the design about component reliability. A number of studies, related to components reliability as well as decision making process of specific incident risk evaluation have been carried out. This paper provides also an overview of the process management set up on site from raw database to specific reliability database in compliance with established corporate objectives. (authors). 4 figs.

From “eco-pessimism” to “eco-optimism” ECOMOG And The West ...

African Journals Online (AJOL)

From “eco-pessimism” to “eco-optimism” ECOMOG And The West African Integration Process. Emmanuel Kwesi Aning. Abstract. No Abstract African Journal of Political Science Vol.4(1) 1999: 21-39. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

Assessing eco-efficiency and the determinants of horticultural family-farming in southeast Spain.

Science.gov (United States)

Godoy-Durán, Ángeles; Galdeano-Gómez, Emilio; Pérez-Mesa, Juan C; Piedra-Muñoz, Laura

2017-12-15

Eco-efficiency is currently receiving ever increasing interest as an indicator of sustainability, as it links environmental and economic performances in productive activities. In agriculture these indicators and their determinants prove relevant due to the close ties in this activity between the use of often limited natural resources and the provision of basic goods for society. The present paper analyzes eco-efficiency at micro-level, focusing on small-scale family farms as the principal decision-making units (DMUs) of horticulture in southeast Spain, which represents over 30% of fresh vegetables produced in the country. To this end, Data Envelopment Analysis (DEA) framework is applied, computing several combinations of environmental pressures (water usage, phytosanitary contamination, waste management, etc.) and economic value added. In a second stage we analyze the influence of family farms' socio-economic and environmental features on eco-efficiency indicators, as endogenous variables, by using truncated regression and bootstrapping techniques. The results show major inefficiency in aspects such as waste management, among others, while there is relatively minor inefficiency in water usage and nitrogen balance. On the other hand, features such as product specialization, adoption of quality certifications, and belonging to a cooperative all have a positive influence on eco-efficiency. These results are deemed to be of interest to agri-food systems structured on small-scale producers, and they may prove useful to policy-makers as regards managing public environmental programs in agriculture. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of Friends on Children’s Physical Activity: A Review

Science.gov (United States)

Maturo, Claire C.

2013-01-01

We examined evidence for friendship influences on children's physical activity (PA) through systematic searches of online databases in May 2012. We identified 106 studies (25 qualitative) published in English since 2000 that analyzed indicators of friendship influences (e.g., communication about PA, friends’ PA, and PA with friends) among persons younger than 19 years. Children's PA was positively associated with encouragement from friends (43 of 55 studies indicating a positive relationship), friends' own PA (30/35), and engagement with friends in PA (9/10). These findings are consistent with friends influencing PA, but most studies did not isolate influence from other factors that could explain similarity. Understanding friendship influences in childhood can facilitate the promotion of lifelong healthy habits. PA with friends should be considered in health promotion programs. PMID:23678914

A user's manual for the database management system of impact property

International Nuclear Information System (INIS)

Ryu, Woo Seok; Park, S. J.; Kong, W. S.; Jun, I.

2003-06-01

This manual is written for the management and maintenance of the impact database system for managing the impact property test data. The data base constructed the data produced from impact property test can increase the application of test results. Also, we can get easily the basic data from database when we prepare the new experiment and can produce better result by compare the previous data. To develop the database we must analyze and design carefully application and after that, we can offer the best quality to customers various requirements. The impact database system was developed by internet method using jsp(Java Server pages) tool

Does Nationality Matter in Eco-Behaviour?

Directory of Open Access Journals (Sweden)

Michelle Bonera

2017-09-01

Full Text Available Although many authors agree on the role of personal values in explaining the main determinants of eco-behaviour, disagreement about the effects of socio-demographic features exists, particularly about the effect of nationality. In an attempt to fill this gap in the literature, this paper contributes to the debate surrounding the main determinants of eco-behaviour, based on a cross-country analysis. To test the role of nationality and personal values in eco-behaviour, a linear regression model involving 353 Chinese and 333 Italian subjects was performed. A stepwise analysis was then conducted to identify the main significant effects. The explorative and stepwise analyses confirmed that nationality is significant when explaining individual eco-behaviour, for both Italian and Chinese people. Moreover, the linear regression model, as a stepwise analysis, showed that regulatory focus and universalism are the main personal values influencing ecological behaviour. Differences emerging from the analysis show significant differences in terms of eco-behaviour and eco-awareness, for the two countries involved in the analysis, that might lead companies to adopt different marketing strategies when promoting eco-products.

Managing XML Data to optimize Performance into Object-Relational Databases

Directory of Open Access Journals (Sweden)

Iuliana BOTHA

2011-06-01

Full Text Available This paper propose some possibilities for manage XML data in order to optimize performance into object-relational databases. It is detailed the possibility of storing XML data into such databases, using for exemplification an Oracle database and there are tested some optimizing techniques of the queries over XMLType tables, like indexing and partitioning tables.

Using Online Databases in Corporate Issues Management.

Science.gov (United States)

Thomsen, Steven R.

1995-01-01

Finds that corporate public relations practitioners felt they were able, using online database and information services, to intercept issues earlier in the "issue cycle" and thus enable their organizations to develop more "proactionary" or "catalytic" issues management repose strategies. (SR)

ECOS: values of parameters to be used for domestic animals

International Nuclear Information System (INIS)

Thorne, M.C.

1984-03-01

This report constitutes the database description for the domestic animals section of the biosphere code ECOS. Two categories of data are supplied, element-independent and element-dependent. The element-independent data comprise rates of food, water and soil consumption, inhalation rates and masses of animal tissues. The element-dependent data consist of f 1 (fractional gastrointestinal absorption), fsub(D) (fractional systematic deposition after inhalation) and NRF (weighted integrated retention function) values. All parameter values given are justified. (author)

Model Meningkatkan Niat Beli Produk Hijau: Sebuah Pendekatan Strategik

Directory of Open Access Journals (Sweden)

Jati Waskito

2016-06-01

Full Text Available This study aims to develop the results of previous research, as follows: 1 design and test a model of consumer perceptions (that has been mapped during year-1 of a comprehensive review of the eco-friendly products 2 analyze the factors (i.e. environmentally friendly corporate image, perceptions of environmentally friendly products, product labels, and government regulations that influence purchasing decisions of eco-friendly products based on design and test result on the proposed model 3 identify the most important factors considered by the consumers through comprehensive model testing, so as to provide empirical evidence for the sake of implementing environmentally conscious marketing strategy.The results of the field survey managed to get 293 respondents who are willing to participate. The conclusions of the study are 1 the proposed research model in this study is able to represent a comprehensive picture of people’s perception on environmentally friendly products; 2 regulatory, corporate image, and product perceptions variables significantly shape the public perception of the eco-friendly products; 3 corporate image variable is the most important element in shaping public perceptions on environmentally friendly products.

Database setup insuring radiopharmaceuticals traceability

International Nuclear Information System (INIS)

Robert, N.; Salmon, F.; Clermont-Gallerande, H. de; Celerier, C.

2002-01-01

Having to organize radiopharmacy and to insure proper traceability of radiopharmaceutical medicines brings numerous problems, especially for the departments which are not assisted with global management network systems. Our work has been to find a solution enabling to use high street software to cover those needs. We have set up a PC database run by the Microsoft software ACCESS 97. Its use consists in: saving data related to generators, isotopes and kits reception and deletion, as well as the results of quality control; transferring data collected from the software that is connected to the activimeter (elutions and preparations registers, prescription book). By relating all the saved data, ACCESS enables to mix all information in order to proceed requests. At this stage, it is possible to edit all regular registers (prescription book, generator and radionuclides follow-up, blood derived medicines traceability) and to quickly retrieve patients who have received a particular radiopharmaceutical, or the radiopharmaceutical that has been given to a particular patient. This user-friendly database provides a considerable support to nuclear medicine department that don't possess any network management for their radiopharmaceutical activity. (author)

Eco-efficiency assessment of dairy wastewater reuse

DEFF Research Database (Denmark)

Rygaard, Martin; Skrydstrup, Julie; Larsen, Sille Lyster

. To evaluate the eco-efficiency of new technologies we have developed a method that aligns assessment of environmental impacts and value creation within a life-cycle boundary of a food processing industry. Using standard life-cycle assessment and the concept of value added we have demonstrated the method......, but it comes at the cost of decreased value creation when considering the entire value chain. The applied eco-efficiency method showed the benefits and drawbacks of implementing a new technology for all involved stakeholders and the concept of value added resonates well with the commercial actors involved...... supply and wastewater management can limit the production capacity of an industrial facility, when local water resources are under stress or wastewater treatment capacity is limited. In such situations, the industry will seek to increase its water efficiency through implementation of new technology...

Keeping Track of Our Treasures: Managing Historical Data with Relational Database Software.

Science.gov (United States)

Gutmann, Myron P.; And Others

1989-01-01

Describes the way a relational database management system manages a large historical data collection project. Shows that such databases are practical to construct. States that the programing tasks involved are not for beginners, but the rewards of having data organized are worthwhile. (GG)

Alkaloids extract of Retama monosperma (L.) Boiss. seeds used as novel eco-friendly inhibitor for carbon steel corrosion in 1 M HCl solution: Electrochemical and surface studies

Energy Technology Data Exchange (ETDEWEB)

El Hamdani, Naoual; Fdil, Rabiaa [Laboratoire de Chimie Bioorganique, Faculté des Sciences, Université Chouaib Doukkali, B.P. 20, M-24000 El Jadida (Morocco); Tourabi, Mustapha [Laboratoire de Catalyse et de Corrosion des Matériaux (LCCM), Faculté des Sciences, Université Chouaib Doukkali, B.P. 20, M-24000 El Jadida (Morocco); Jama, Charafeddine [UMET-PSI, CNRS UMR 8207, ENSCL, Université Lille 1, CS 90108, F-59652 Villeneuve d’Ascq Cedex (France); Bentiss, Fouad, E-mail: fbentiss@enscl.fr [Laboratoire de Catalyse et de Corrosion des Matériaux (LCCM), Faculté des Sciences, Université Chouaib Doukkali, B.P. 20, M-24000 El Jadida (Morocco); UMET-PSI, CNRS UMR 8207, ENSCL, Université Lille 1, CS 90108, F-59652 Villeneuve d’Ascq Cedex (France)

2015-12-01

Graphical abstract: - Highlights: • AERS is good eco-friendly corrosion inhibitor for carbon steel in 1 M HCl. • AERS acts as mixed-type inhibitor in 1 M HCl medium. • AERS adsorption is well described by Langmuir isotherm. • Surface analyses were used to explain the AERS mechanism of carbon steel corrosion inhibition. - Abstract: Current research efforts now focus on the development of non-toxic, inexpensive and environmentally friendly corrosion inhibitors as alternatives to different organic and non-organic compounds. In this field, alkaloids extract of Retama monosperma (L.) Boiss. seeds (AERS) was tested for the first time as corrosion inhibitor for carbon steel in 1 M HCl medium using electrochemical and surface characterization techniques. The obtained results showed that this plant extract's acts as an efficient corrosion inhibitor for carbon steel in 1 M HCl and an inhibition efficiency of 94.4% was reached with 400 mg/L of AERS at 30 °C. Ac impedance experimental data revealed a frequency distribution of the capacitance, simulated as constant phase element. Impedance results demonstrated that the addition of the AERS in the corrosive solution decreases the charge capacitance and simultaneously increases the function of the charge/discharge of the interface, facilitating the formation of an adsorbed layer over the steel surface. Polarization curves indicated that AERS is a mixed inhibitor. Adsorption of such alkaloid extract on the steel surface obeyed to the Langmuir adsorption isotherm. X-ray photoelectron spectroscopy (XPS) showed that the inhibition of steel corrosion in normal hydrochloric solution by AERS is mainly controlled by a physisorption process and the inhibitive layer is composed of an iron oxide/hydroxide mixture where AERS molecules are incorporated.

Database of Samples Irradiated at Reactor TRIGA PUSPATI (RTP)

International Nuclear Information System (INIS)

Muhd Husamuddin Abdul Khalil; Mohd Amin Sharifuldin Salleh; Julia Abdul Karim

2011-01-01

Evaluation has been made to data of irradiated samples for the type of sample requested for activation at RTP. Sample types are grouped with percentage of total throughputs to rule out the weight percent of every respective group. The database consists of radionuclide inventory of short and long half-life and high activity radionuclides such as Br and Au have been identified and that database has been constructed using a user-friendly Microsoft Access. Through this, trend of gamma exposure will easily be evaluated at experimental facilities and could ensure radiological effect towards safety and health is limited per Radiation Protection (Basic Safety Standard) Regulation 1988. This database places an important parameter to improve management system in acquiring information of the samples irradiated at RTP and will enhance the safety assurance and reliability of the experimental design basis. (author)

Crop Management Effects on the Energy and Carbon Balances of Maize Stover-Based Ethanol Production

Directory of Open Access Journals (Sweden)

Prem Woli

2014-12-01

Full Text Available This study was conducted to identify the crop management options—the combinations of various cultivars, irrigation amounts, planting dates, and soils—that would maximize the energy sustainability and eco-friendliness of maize (Zea mays L. stover-based ethanol production systems in the Mississippi Delta. Stover yields simulated with CERES-Maize were used to compute net energy value (NEV and carbon credit balance (CCB, the indicators of sustainability and eco-friendliness of ethanol production, respectively, for various scenarios. As the results showed, deeper soils with higher water holding capacities had larger NEV and CCB values. Both NEV and CCB had sigmoid relationships with irrigation amount and planting date and could be maximized by planting the crop during the optimum planting window. Stover yield had positive effects on NEV and CCB, whereas travel distance had negative. The influence of stover yield was larger than that of travel distance, indicating that increasing feedstock yields should be emphasized over reducing travel distance. The NEV and CCB values indicated that stover-based ethanol production in the Mississippi Delta is sustainable and environmentally friendly. The study demonstrated that the energy sustainability and eco-friendliness of maize stover-based ethanol production could be increased with alternative crop management options.