Use of computer programs to evaluate effectiveness of security systems

International Nuclear Information System (INIS)

Harris, L. Jr.; Goldman, L.A.; Mc Daniel, T.L.

1987-01-01

Thirty or more computer programs for security vulnerability analysis were developed from 1975 through 1980. Most of these programs are intended for evaluating security system effectiveness against outsider threats, but at least six programs are primarily oriented to insider threats. Some strengths and weaknesses of these programs are described. Six of these programs, four for outsider threats and two for insider threats, have been revised and adapted for use with IBM personal computers. The vulnerability analysis process is discussed with emphasis on data collection. The difference between design data and operational data is described. For performance-type operational data, such as detection probabilities and barrier delay times, the difference between unstressed and stressed performance data is discussed. Stressed performance data correspond to situations where an adversary attempts to weaken a security system by mitigating certain security measures. Suggestions are made on the combined use of manual analysis and computer analysis

Topology optimization using PETSc: An easy-to-use, fully parallel, open source topology optimization framework

DEFF Research Database (Denmark)

Aage, Niels; Andreassen, Erik; Lazarov, Boyan Stefanov

2015-01-01

This paper presents a flexible framework for parallel and easy-to-implement topology optimization using the Portable and Extendable Toolkit for Scientific Computing (PETSc). The presented framework is based on a standardized, and freely available library and in the published form it solves...

Computer program CDCID: an automated quality control program using CDC update

International Nuclear Information System (INIS)

Singer, G.L.; Aguilar, F.

1984-04-01

A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. The computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program

Computer code conversion using HISTORIAN

International Nuclear Information System (INIS)

Matsumoto, Kiyoshi; Kumakura, Toshimasa.

1990-09-01

When a computer program written for a computer A is converted for a computer B, in general, the A version source program is rewritten for B version. However, in this way of program conversion, the following inconvenient problems arise. 1) The original statements to be rewritten for B version are lost. 2) If the original statements of the A version rewritten for B version would remain as comment lines, the B version source program becomes quite large. 3) When update directives of the program are mailed from the organization which developed the program or when some modifications are needed for the program, it is difficult to point out the part to be updated or modified in the B version source program. To solve these problems, the conversion method using the general-purpose software management aid system, HISTORIAN, has been introduced. This conversion method makes a large computer code a easy-to-use program for use to update, modify or improve after the conversion. This report describes the planning and procedures of the conversion method and the MELPROG-PWR/MOD1 code conversion from the CRAY version to the JAERI FACOM version as an example. This report would provide useful information for those who develop or introduce large programs. (author)

The ACP [Advanced Computer Program] multiprocessor system at Fermilab

International Nuclear Information System (INIS)

Nash, T.; Areti, H.; Atac, R.

1986-09-01

The Advanced Computer Program at Fermilab has developed a multiprocessor system which is easy to use and uniquely cost effective for many high energy physics problems. The system is based on single board computers which cost under $2000 each to build including 2 Mbytes of on board memory. These standard VME modules each run experiment reconstruction code in Fortran at speeds approaching that of a VAX 11/780. Two versions have been developed: one uses Motorola's 68020 32 bit microprocessor, the other runs with AT and T's 32100. both include the corresponding floating point coprocessor chip. The first system, when fully configured, uses 70 each of the two types of processors. A 53 processor system has been operated for several months with essentially no down time by computer operators in the Fermilab Computer Center, performing at nearly the capacity of 6 CDC Cyber 175 mainframe computers. The VME crates in which the processing ''nodes'' sit are connected via a high speed ''Branch Bus'' to one or more MicroVAX computers which act as hosts handling system resource management and all I/O in offline applications. An interface from Fastbus to the Branch Bus has been developed for online use which has been tested error free at 20 Mbytes/sec for 48 hours. ACP hardware modules are now available commercially. A major package of software, including a simulator that runs on any VAX, has been developed. It allows easy migration of existing programs to this multiprocessor environment. This paper describes the ACP Multiprocessor System and early experience with it at Fermilab and elsewhere

A programming approach to computability

CERN Document Server

Kfoury, A J; Arbib, Michael A

1982-01-01

Computability theory is at the heart of theoretical computer science. Yet, ironically, many of its basic results were discovered by mathematical logicians prior to the development of the first stored-program computer. As a result, many texts on computability theory strike today's computer science students as far removed from their concerns. To remedy this, we base our approach to computability on the language of while-programs, a lean subset of PASCAL, and postpone consideration of such classic models as Turing machines, string-rewriting systems, and p. -recursive functions till the final chapter. Moreover, we balance the presentation of un solvability results such as the unsolvability of the Halting Problem with a presentation of the positive results of modern programming methodology, including the use of proof rules, and the denotational semantics of programs. Computer science seeks to provide a scientific basis for the study of information processing, the solution of problems by algorithms, and the design ...

Computer-aided trauma simulation system with haptic feedback is easy and fast for oral-maxillofacial surgeons to learn and use.

Science.gov (United States)

Schvartzman, Sara C; Silva, Rebeka; Salisbury, Ken; Gaudilliere, Dyani; Girod, Sabine

2014-10-01

Computer-assisted surgical (CAS) planning tools have become widely available in craniomaxillofacial surgery, but are time consuming and often require professional technical assistance to simulate a case. An initial oral and maxillofacial (OM) surgical user experience was evaluated with a newly developed CAS system featuring a bimanual sense of touch (haptic). Three volunteer OM surgeons received a 5-minute verbal introduction to the use of a newly developed haptic-enabled planning system. The surgeons were instructed to simulate mandibular fracture reductions of 3 clinical cases, within a 15-minute time limit and without a time limit, and complete a questionnaire to assess their subjective experience with the system. Standard landmarks and linear and angular measurements between the simulated results and the actual surgical outcome were compared. After the 5-minute instruction, all 3 surgeons were able to use the system independently. The analysis of standardized anatomic measurements showed that the simulation results within a 15-minute time limit were not significantly different from those without a time limit. Mean differences between measurements of surgical and simulated fracture reductions were within current resolution limitations in collision detection, segmentation of computed tomographic scans, and haptic devices. All 3 surgeons reported that the system was easy to learn and use and that they would be comfortable integrating it into their daily clinical practice for trauma cases. A CAS system with a haptic interface that capitalizes on touch and force feedback experience similar to operative procedures is fast and easy for OM surgeons to learn and use. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. All rights reserved.

Bringing computational science to the public.

Science.gov (United States)

McDonagh, James L; Barker, Daniel; Alderson, Rosanna G

2016-01-01

The increasing use of computers in science allows for the scientific analyses of large datasets at an increasing pace. We provided examples and interactive demonstrations at Dundee Science Centre as part of the 2015 Women in Science festival, to present aspects of computational science to the general public. We used low-cost Raspberry Pi computers to provide hands on experience in computer programming and demonstrated the application of computers to biology. Computer games were used as a means to introduce computers to younger visitors. The success of the event was evaluated by voluntary feedback forms completed by visitors, in conjunction with our own self-evaluation. This work builds on the original work of the 4273π bioinformatics education program of Barker et al. (2013, BMC Bioinform. 14:243). 4273π provides open source education materials in bioinformatics. This work looks at the potential to adapt similar materials for public engagement events. It appears, at least in our small sample of visitors (n = 13), that basic computational science can be conveyed to people of all ages by means of interactive demonstrations. Children as young as five were able to successfully edit simple computer programs with supervision. This was, in many cases, their first experience of computer programming. The feedback is predominantly positive, showing strong support for improving computational science education, but also included suggestions for improvement. Our conclusions are necessarily preliminary. However, feedback forms suggest methods were generally well received among the participants; "Easy to follow. Clear explanation" and "Very easy. Demonstrators were very informative." Our event, held at a local Science Centre in Dundee, demonstrates that computer games and programming activities suitable for young children can be performed alongside a more specialised and applied introduction to computational science for older visitors.

The introduction of computer assisted learning in a school of midwifery using the Wessex Care Plan Program.

Science.gov (United States)

Leong, W C

1989-04-01

This case study was the result of attending the Computer Assisted Learning (CAL) Course sponsored by the Wessex Regional CAL Project. This was the Region's initiative to prepare Nurse and Midwife Teachers in developing CAL in the curriculum. The small scale qualitative classroom study was conducted in the School of Midwifery. The aim of the study was to evaluate the use of the content-free Wessex Care Plan Program (WCPP) in the Midwifery curriculum. For the evaluation of the study, a triangulation of data were obtained from the following sources: 1) classroom observation 2) questionnaires and interviews of eight Student Midwives 3) colleagues' responses to the introduction of CAL and personal experience The findings of this study showed that the content-free WCPP was easy to prepare and implement. The Student Midwives found the program easy to follow and a useful means of learning. At the same time it was enjoyable and fun; a dimension of learning that we could do with more often!

The ACP (Advanced Computer Program) multiprocessor system at Fermilab

Energy Technology Data Exchange (ETDEWEB)

Nash, T.; Areti, H.; Atac, R.; Biel, J.; Case, G.; Cook, A.; Fischler, M.; Gaines, I.; Hance, R.; Husby, D.

1986-09-01

The Advanced Computer Program at Fermilab has developed a multiprocessor system which is easy to use and uniquely cost effective for many high energy physics problems. The system is based on single board computers which cost under $2000 each to build including 2 Mbytes of on board memory. These standard VME modules each run experiment reconstruction code in Fortran at speeds approaching that of a VAX 11/780. Two versions have been developed: one uses Motorola's 68020 32 bit microprocessor, the other runs with AT and T's 32100. both include the corresponding floating point coprocessor chip. The first system, when fully configured, uses 70 each of the two types of processors. A 53 processor system has been operated for several months with essentially no down time by computer operators in the Fermilab Computer Center, performing at nearly the capacity of 6 CDC Cyber 175 mainframe computers. The VME crates in which the processing ''nodes'' sit are connected via a high speed ''Branch Bus'' to one or more MicroVAX computers which act as hosts handling system resource management and all I/O in offline applications. An interface from Fastbus to the Branch Bus has been developed for online use which has been tested error free at 20 Mbytes/sec for 48 hours. ACP hardware modules are now available commercially. A major package of software, including a simulator that runs on any VAX, has been developed. It allows easy migration of existing programs to this multiprocessor environment. This paper describes the ACP Multiprocessor System and early experience with it at Fermilab and elsewhere.

Computer program to solve two-dimensional shock-wave interference problems with an equilibrium chemically reacting air model

Science.gov (United States)

Glass, Christopher E.

1990-08-01

The computer program EASI, an acronym for Equilibrium Air Shock Interference, was developed to calculate the inviscid flowfield, the maximum surface pressure, and the maximum heat flux produced by six shock wave interference patterns on a 2-D, cylindrical configuration. Thermodynamic properties of the inviscid flowfield are determined using either an 11-specie, 7-reaction equilibrium chemically reacting air model or a calorically perfect air model. The inviscid flowfield is solved using the integral form of the conservation equations. Surface heating calculations at the impingement point for the equilibrium chemically reacting air model use variable transport properties and specific heat. However, for the calorically perfect air model, heating rate calculations use a constant Prandtl number. Sample calculations of the six shock wave interference patterns, a listing of the computer program, and flowcharts of the programming logic are included.

Spying on real-time computers to improve performance

International Nuclear Information System (INIS)

Taff, L.M.

1975-01-01

The sampled program-counter histogram, an established technique for shortening the execution times of programs, is described for a real-time computer. The use of a real-time clock allows particularly easy implementation. (Auth.)

Ways to increase the effectiveness of using computers and machine programs

Energy Technology Data Exchange (ETDEWEB)

Bulgakov, R T; Bagautdinov, G M; Kovalenko, Yu M

1979-01-01

An analysis is conducted of the statistical data about the operation of the computers of the computer center of the Tatar Scientific Research and Design Institute for Oil. Exposing the reasons which impact on the effectiveness of the use of the computers and the machine programs through an expert questionnaire, an ''effectiveness tree'' is compiled. Formulated are organizational measures for the executor (the computer center), the user and management and the senior leadership, which are required in order to successfully use the computers.

Using Rule-Based Computer Programming to Unify Communication Rules Research.

Science.gov (United States)

Sanford, David L.; Roach, J. W.

This paper proposes the use of a rule-based computer programming language as a standard for the expression of rules, arguing that the adoption of a standard would enable researchers to communicate about rules in a consistent and significant way. Focusing on the formal equivalence of artificial intelligence (AI) programming to different types of…

Department of Energy Mathematical, Information, and Computational Sciences Division: High Performance Computing and Communications Program

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

This document is intended to serve two purposes. Its first purpose is that of a program status report of the considerable progress that the Department of Energy (DOE) has made since 1993, the time of the last such report (DOE/ER-0536, The DOE Program in HPCC), toward achieving the goals of the High Performance Computing and Communications (HPCC) Program. The second purpose is that of a summary report of the many research programs administered by the Mathematical, Information, and Computational Sciences (MICS) Division of the Office of Energy Research under the auspices of the HPCC Program and to provide, wherever relevant, easy access to pertinent information about MICS-Division activities via universal resource locators (URLs) on the World Wide Web (WWW).

Creating Electronic Books-Chapters for Computers and Tablets Using Easy Java/JavaScript Simulations, EjsS Modeling Tool

OpenAIRE

Wee, Loo Kang

2015-01-01

This paper shares my journey (tools used, design principles derived and modeling pedagogy implemented) when creating electronic books-chapters (epub3 format) for computers and tablets using Easy Java/JavaScript Simulations, (old name EJS, new EjsS) Modeling Tool. The theory underpinning this work grounded on learning by doing through dynamic and interactive simulation-models that can be more easily made sense of instead of the static nature of printed materials. I started combining related co...

Gender differences in the use of computers, programming, and peer interactions in computer science classrooms

Science.gov (United States)

Stoilescu, Dorian; Egodawatte, Gunawardena

2010-12-01

Research shows that female and male students in undergraduate computer science programs view computer culture differently. Female students are interested more in the use of computers than in doing programming, whereas male students see computer science mainly as a programming activity. The overall purpose of our research was not to find new definitions for computer science culture but to see how male and female students see themselves involved in computer science practices, how they see computer science as a successful career, and what they like and dislike about current computer science practices. The study took place in a mid-sized university in Ontario. Sixteen students and two instructors were interviewed to get their views. We found that male and female views are different on computer use, programming, and the pattern of student interactions. Female and male students did not have any major issues in using computers. In computing programming, female students were not so involved in computing activities whereas male students were heavily involved. As for the opinions about successful computer science professionals, both female and male students emphasized hard working, detailed oriented approaches, and enjoying playing with computers. The myth of the geek as a typical profile of successful computer science students was not found to be true.

Factors facilitating and inhibiting implementation of easy accessible sporting programs.

NARCIS (Netherlands)

Ooms, L.; Veenhof, C.

2012-01-01

Introduction: The organized sport sector has been identified as a potential setting for physical activity promotion. In The Netherlands, ten national sporting organizations were funded to develop and implement easy accessible sporting programs, especially for the least active population groups. A

Vernier Caliper and Micrometer Computer Models Using Easy Java Simulation and Its Pedagogical Design Features--Ideas for Augmenting Learning with Real Instruments

Science.gov (United States)

Wee, Loo Kang; Ning, Hwee Tiang

2014-01-01

This paper presents the customization of Easy Java Simulation models, used with actual laboratory instruments, to create active experiential learning for measurements. The laboratory instruments are the vernier caliper and the micrometer. Three computer model design ideas that complement real equipment are discussed. These ideas involve (1) a…

The Environment for Application Software Integration and Execution (EASIE), version 1.0. Volume 2: Program integration guide

Science.gov (United States)

Jones, Kennie H.; Randall, Donald P.; Stallcup, Scott S.; Rowell, Lawrence F.

1988-01-01

The Environment for Application Software Integration and Execution, EASIE, provides a methodology and a set of software utility programs to ease the task of coordinating engineering design and analysis codes. EASIE was designed to meet the needs of conceptual design engineers that face the task of integrating many stand-alone engineering analysis programs. Using EASIE, programs are integrated through a relational data base management system. In volume 2, the use of a SYSTEM LIBRARY PROCESSOR is used to construct a DATA DICTIONARY describing all relations defined in the data base, and a TEMPLATE LIBRARY. A TEMPLATE is a description of all subsets of relations (including conditional selection criteria and sorting specifications) to be accessed as input or output for a given application. Together, these form the SYSTEM LIBRARY which is used to automatically produce the data base schema, FORTRAN subroutines to retrieve/store data from/to the data base, and instructions to a generic REVIEWER program providing review/modification of data for a given template. Automation of these functions eliminates much of the tedious, error prone work required by the usual approach to data base integration.

Gender Differences in the Use of Computers, Programming, and Peer Interactions in Computer Science Classrooms

Science.gov (United States)

Stoilescu, Dorian; Egodawatte, Gunawardena

2010-01-01

Research shows that female and male students in undergraduate computer science programs view computer culture differently. Female students are interested more in the use of computers than in doing programming, whereas male students see computer science mainly as a programming activity. The overall purpose of our research was not to find new…

Interactive computer programs for applied nutrition education.

Science.gov (United States)

Wise, A

1985-12-01

DIET2 and DIET3 are programs written for a Dec2050 computer and intended for teaching applied nutrition to students of nutrition, dietetics, home economics, and hotel and institutional administration. DIET2 combines all the facilities of the separate dietary programs already available at Robert Gordon's Institute of Technology into a single package, and extends these to give students a large amount of relevant information about the nutritional balance of foods (including DHSS and NACNE recommendations) prior to choosing them for meals. Students are also helped by the inclusion of typical portion weights. They are presented with an analysis of nutrients and their balance in the menu created, with an easy mechanism for ammendation of the menu and addition of foods which provide the nutrients that are lacking. At any stage the computer can give the proportion of total nutrient provided by each meal. DIET3 is a relatively simple program that displays the nutritional profile of foods and diets semigraphically.

Aether: leveraging linear programming for optimal cloud computing in genomics.

Science.gov (United States)

Luber, Jacob M; Tierney, Braden T; Cofer, Evan M; Patel, Chirag J; Kostic, Aleksandar D

2018-05-01

Across biology, we are seeing rapid developments in scale of data production without a corresponding increase in data analysis capabilities. Here, we present Aether (http://aether.kosticlab.org), an intuitive, easy-to-use, cost-effective and scalable framework that uses linear programming to optimally bid on and deploy combinations of underutilized cloud computing resources. Our approach simultaneously minimizes the cost of data analysis and provides an easy transition from users' existing HPC pipelines. Data utilized are available at https://pubs.broadinstitute.org/diabimmune and with EBI SRA accession ERP005989. Source code is available at (https://github.com/kosticlab/aether). Examples, documentation and a tutorial are available at http://aether.kosticlab.org. chirag_patel@hms.harvard.edu or aleksandar.kostic@joslin.harvard.edu. Supplementary data are available at Bioinformatics online.

Computer programming and computer systems

CERN Document Server

Hassitt, Anthony

1966-01-01

Computer Programming and Computer Systems imparts a "reading knowledge? of computer systems.This book describes the aspects of machine-language programming, monitor systems, computer hardware, and advanced programming that every thorough programmer should be acquainted with. This text discusses the automatic electronic digital computers, symbolic language, Reverse Polish Notation, and Fortran into assembly language. The routine for reading blocked tapes, dimension statements in subroutines, general-purpose input routine, and efficient use of memory are also elaborated.This publication is inten

A Geostationary Earth Orbit Satellite Model Using Easy Java Simulation

Science.gov (United States)

Wee, Loo Kang; Goh, Giam Hwee

2013-01-01

We develop an Easy Java Simulation (EJS) model for students to visualize geostationary orbits near Earth, modelled using a Java 3D implementation of the EJS 3D library. The simplified physics model is described and simulated using a simple constant angular velocity equation. We discuss four computer model design ideas: (1) a simple and realistic…

The EASI model: A first integrative computational approximation to the natural history of COPD.

Directory of Open Access Journals (Sweden)

Alvar Agustí

Full Text Available The natural history of chronic obstructive pulmonary disease (COPD is still not well understood. Traditionally believed to be a self-inflicted disease by smoking, now we know that not all smokers develop COPD, that other inhaled pollutants different from cigarette smoke can also cause it, and that abnormal lung development can also lead to COPD in adulthood. Likewise, the inflammatory response that characterizes COPD varies significantly between patients, and not all of them perceive symptoms (mostly breathlessness similarly. To investigate the variability and determinants of different "individual natural histories" of COPD, we developed a theoretical, multi-stage, computational model of COPD (EASI that integrates dynamically and represents graphically the relationships between exposure (E to inhaled particles and gases (smoking, the biological activity (inflammatory response of the disease (A, the severity (S of airflow limitation (FEV1 and the impact (I of the disease (breathlessness in different clinical scenarios. EASI shows that the relationships between E, A, S and I vary markedly within individuals (through life and between individuals (at the same age. It also helps to delineate some potentially relevant, but often overlooked concepts, such as disease progression, susceptibility to COPD and issues related to symptom perception. In conclusion, EASI is an initial conceptual model to interpret the longitudinal and cross-sectional relationships between E, A, S and I in different clinical scenarios. Currently, it does not have any direct clinical application, thus it requires experimental validation and further mathematical development. However, it has the potential to open novel research and teaching alternatives.

Computational Software to Fit Seismic Data Using Epidemic-Type Aftershock Sequence Models and Modeling Performance Comparisons

Science.gov (United States)

Chu, A.

2016-12-01

Modern earthquake catalogs are often analyzed using spatial-temporal point process models such as the epidemic-type aftershock sequence (ETAS) models of Ogata (1998). My work implements three of the homogeneous ETAS models described in Ogata (1998). With a model's log-likelihood function, my software finds the Maximum-Likelihood Estimates (MLEs) of the model's parameters to estimate the homogeneous background rate and the temporal and spatial parameters that govern triggering effects. EM-algorithm is employed for its advantages of stability and robustness (Veen and Schoenberg, 2008). My work also presents comparisons among the three models in robustness, convergence speed, and implementations from theory to computing practice. Up-to-date regional seismic data of seismic active areas such as Southern California and Japan are used to demonstrate the comparisons. Data analysis has been done using computer languages Java and R. Java has the advantages of being strong-typed and easiness of controlling memory resources, while R has the advantages of having numerous available functions in statistical computing. Comparisons are also made between the two programming languages in convergence and stability, computational speed, and easiness of implementation. Issues that may affect convergence such as spatial shapes are discussed.

Department of Energy: MICS (Mathematical Information, and Computational Sciences Division). High performance computing and communications program

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-06-01

This document is intended to serve two purposes. Its first purpose is that of a program status report of the considerable progress that the Department of Energy (DOE) has made since 1993, the time of the last such report (DOE/ER-0536, {open_quotes}The DOE Program in HPCC{close_quotes}), toward achieving the goals of the High Performance Computing and Communications (HPCC) Program. The second purpose is that of a summary report of the many research programs administered by the Mathematical, Information, and Computational Sciences (MICS) Division of the Office of Energy Research under the auspices of the HPCC Program and to provide, wherever relevant, easy access to pertinent information about MICS-Division activities via universal resource locators (URLs) on the World Wide Web (WWW). The information pointed to by the URL is updated frequently, and the interested reader is urged to access the WWW for the latest information.

An easy guide to factor analysis

CERN Document Server

Kline, Paul

2014-01-01

Factor analysis is a statistical technique widely used in psychology and the social sciences. With the advent of powerful computers, factor analysis and other multivariate methods are now available to many more people. An Easy Guide to Factor Analysis presents and explains factor analysis as clearly and simply as possible. The author, Paul Kline, carefully defines all statistical terms and demonstrates step-by-step how to work out a simple example of principal components analysis and rotation. He further explains other methods of factor analysis, including confirmatory and path analysis, a

Development of a Computer Program for the Analysis Logistics of PWR Spent Fuels

International Nuclear Information System (INIS)

Choi, Heui Joo; Choi, Jong Won; Cha, Jeong Hun

2008-01-01

It is expected that the temporary storage facilities at the nuclear power plants will be full of the spent fuels within 10 years. Provided that a centralized interim storage facility is constructed along the coast of the Korean peninsula to solve this problem, a substantial amount of spent fuels should be transported by sea or by land every year. In this paper we developed a computer program for the analysis of transportation logistics of the spent fuels from 4 different nuclear power plant sites to the hypothetical centralized interim storage facility and the final repository. Mass balance equations were used to analyze the logistics between the nuclear power plants and the interim storage facility. To this end a computer program, CASK, was developed by using the VISUAL BASIC language. The annual transportation rates of spent fuels from the four nuclear power plant sites were determined by using the CASK program. The parameter study with the program illustrated the easiness of logistics analysis. The program could be used for the cost analysis of the spent fuel transportation as well.

Recommended programming practices to facilitate the portability of science computer programs

International Nuclear Information System (INIS)

Anon.

1983-01-01

This standard recommends programming practices to facilitate the portability of computer programs prepared for scientific and engineering computations. These practices are intended to simplify implementation, conversion, and modification of computer programs

Thinking processes used by high-performing students in a computer programming task

Directory of Open Access Journals (Sweden)

Marietjie Havenga

2011-07-01

Full Text Available Computer programmers must be able to understand programming source code and write programs that execute complex tasks to solve real-world problems. This article is a trans- disciplinary study at the intersection of computer programming, education and psychology. It outlines the role of mental processes in the process of programming and indicates how successful thinking processes can support computer science students in writing correct and well-defined programs. A mixed methods approach was used to better understand the thinking activities and programming processes of participating students. Data collection involved both computer programs and students’ reflective thinking processes recorded in their journals. This enabled analysis of psychological dimensions of participants’ thinking processes and their problem-solving activities as they considered a programming problem. Findings indicate that the cognitive, reflective and psychological processes used by high-performing programmers contributed to their success in solving a complex programming problem. Based on the thinking processes of high performers, we propose a model of integrated thinking processes, which can support computer programming students. Keywords: Computer programming, education, mixed methods research, thinking processes.  Disciplines: Computer programming, education, psychology

Using the Computer in Special Vocational Programs. Inservice Activities.

Science.gov (United States)

Lane, Kenneth; Ward, Raymond

This inservice manual is intended to assist vocational education teachers in using the techniques of computer-assisted instruction in special vocational education programs. Addressed in the individual units are the following topics: the basic principles of computer-assisted instruction (TRS-80 computers and typing on a computer keyboard); money…

Introduction to the Atari Computer. A Program Written in the Pilot Programming Language.

Science.gov (United States)

Schlenker, Richard M.

Designed to be an introduction to the Atari microcomputers for beginners, the interactive computer program listed in this document is written in the Pilot programing language. Instructions are given for entering and storing the program in the computer memory for use by students. (MES)

Linear and integer programming made easy

CERN Document Server

Hu, T C

2016-01-01

Linear and integer programming are fundamental toolkits for data and information science and technology, particularly in the context of today’s megatrends toward statistical optimization, machine learning, and big data analytics. Drawn from over 30 years of classroom teaching and applied research experience, this textbook provides a crisp and practical introduction to the basics of linear and integer programming. The authors’ approach is accessible to students from all fields of engineering, including operations research, statistics, machine learning, control system design, scheduling, formal verification, and computer vision. Readers will learn to cast hard combinatorial problems as mathematical programming optimizations, understand how to achieve formulations where the objective and constraints are linear, choose appropriate solution methods, and interpret results appropriately. •Provides a concise introduction to linear and integer programming, appropriate for undergraduates, graduates, a short cours...

EASI graphics - Version II

International Nuclear Information System (INIS)

Allensworth, J.A.

1984-04-01

EASI (Estimate of Adversary Sequence Interruption) is an analytical technique for measuring the effectiveness of physical protection systems. EASI Graphics is a computer graphics extension of EASI which provides a capability for performing sensitivity and trade-off analyses of the parameters of a physical protection system. This document reports on the implementation of the Version II of EASI Graphics and illustrates its application with some examples. 5 references, 15 figures, 6 tables

Easy-to-use augmented reality neuronavigation using a wireless tablet PC.

Science.gov (United States)

Deng, Weiwei; Li, Fang; Wang, Manning; Song, Zhijian

2014-01-01

Augmented reality (AR) technology solves the problem of view switching in traditional image-guided neurosurgery systems by integrating computer-generated objects into the actual scene. However, the state-of-the-art AR solution using head-mounted displays has not been widely accepted in clinical applications because it causes some inconvenience for the surgeon during surgery. In this paper, we present a Tablet-AR system that transmits navigation information to a movable tablet PC via a wireless local area network and overlays this information on the tablet screen, which simultaneously displays the actual scene captured by its back-facing camera. With this system, the surgeon can directly observe the intracranial anatomical structure of the patient with the overlaid virtual projection images to guide the surgery. The alignment errors in the skull specimen study and clinical experiment were 4.6 pixels (approx. 1.6 mm) and 6 pixels (approx. 2.1 mm), respectively. The system was also used for navigation in 2 actual clinical cases of neurosurgery, which demonstrated its feasibility in a clinical application. The easy-to-use Tablet-AR system presented in this study is accurate and feasible in clinical applications and has the potential to become a routine device in AR neuronavigation.

CASKS (Computer Analysis of Storage casKS): A microcomputer based analysis system for storage cask design review. User's manual to Version 1b (including program reference)

International Nuclear Information System (INIS)

Chen, T.F.; Gerhard, M.A.; Trummer, D.J.; Johnson, G.L.; Mok, G.C.

1995-02-01

CASKS (Computer Analysis of Storage casKS) is a microcomputer-based system of computer programs and databases developed at the Lawrence Livermore National Laboratory (LLNL) for evaluating safety analysis reports on spent-fuel storage casks. The bulk of the complete program and this user's manual are based upon the SCANS (Shipping Cask ANalysis System) program previously developed at LLNL. A number of enhancements and improvements were added to the original SCANS program to meet requirements unique to storage casks. CASKS is an easy-to-use system that calculates global response of storage casks to impact loads, pressure loads and thermal conditions. This provides reviewers with a tool for an independent check on analyses submitted by licensees. CASKS is based on microcomputers compatible with the IBM-PC family of computers. The system is composed of a series of menus, input programs, cask analysis programs, and output display programs. All data is entered through fill-in-the-blank input screens that contain descriptive data requests

Introduction to programming multiple-processor computers

International Nuclear Information System (INIS)

Hicks, H.R.; Lynch, V.E.

1985-04-01

FORTRAN applications programs can be executed on multiprocessor computers in either a unitasking (traditional) or multitasking form. The latter allows a single job to use more than one processor simultaneously, with a consequent reduction in wall-clock time and, perhaps, the cost of the calculation. An introduction to programming in this environment is presented. The concepts of synchronization and data sharing using EVENTS and LOCKS are illustrated with examples. The strategy of strong synchronization and the use of synchronization templates are proposed. We emphasize that incorrect multitasking programs can produce irreproducible results, which makes debugging more difficult

A digital imaging teaching file by using the internet, HTML and personal computers

International Nuclear Information System (INIS)

Chun, Tong Jin; Jeon, Eun Ju; Baek, Ho Gil; Kang, Eun Joo; Baik, Seung Kug; Choi, Han Yong; Kim, Bong Ki

1996-01-01

A film-based teaching file takes up space and the need to search through such a file places limits on the extent to which it is likely to be used. Furthermore it is not easy for doctors in a medium-sized hospital to experience a variety of cases, and so for these reasons we created an easy-to-use digital imaging teaching file with HTML(Hypertext Markup Language) and downloaded images via World Wide Web(WWW) services on the Internet. This was suitable for use by computer novices. We used WWW internet services as a resource for various images and three different IMB-PC compatible computers(386DX, 486DX-II, and Pentium) in downloading the images and in developing a digitalized teaching file. These computers were connected with the Internet through a high speed dial-up modem(28.8Kbps) and to navigate the Internet. Twinsock and Netscape were used. 3.0, Korean word processing software, was used to create HTML(Hypertext Markup Language) files and the downloaded images were linked to the HTML files. In this way, a digital imaging teaching file program was created. Access to a Web service via the Internet required a high speed computer(at least 486DX II with 8MB RAM) for comfortabel use; this also ensured that the quality of downloaded images was not degraded during downloading and that these were good enough to use as a teaching file. The time needed to retrieve the text and related images depends on the size of the file, the speed of the network, and the network traffic at the time of connection. For computer novices, a digital image teaching file using HTML is easy to use. Our method of creating a digital imaging teaching file by using Internet and HTML would be easy to create and radiologists with little computer experience who want to study various digital radiologic imaging cases would find it easy to use

Introduction of handheld computing to a family practice residency program.

Science.gov (United States)

Rao, Goutham

2002-01-01

Handheld computers are valuable practice tools. It is important for residency programs to introduce their trainees and faculty to this technology. This article describes a formal strategy to introduce handheld computing to a family practice residency program. Objectives were selected for the handheld computer training program that reflected skills physicians would find useful in practice. TRGpro handheld computers preloaded with a suite of medical reference programs, a medical calculator, and a database program were supplied to participants. Training consisted of four 1-hour modules each with a written evaluation quiz. Participants completed a self-assessment questionnaire after the program to determine their ability to meet each objective. Sixty of the 62 participants successfully completed the training program. The mean composite score on quizzes was 36 of 40 (90%), with no significant differences by level of residency training. The mean self-ratings of participants across all objectives was 3.31 of 4.00. Third-year residents had higher mean self-ratings than others (mean of group, 3.62). Participants were very comfortable with practical skills, such as using drug reference software, and less comfortable with theory, such as knowing the different types of handheld computers available. Structured training is a successful strategy for introducing handheld computing to a residency program.

Using Arduino to Teach Programming to First-Year Computer Science Students

Science.gov (United States)

Tan, Wee Lum; Venema, Sven; Gonzalez, Ruben

2017-01-01

Transitioning to university is recognised as a challenging endeavour for commencing students. For commencing Computer Science students specifically, evidence suggests a link between poor performance in introductory technical courses, such as programming, and high attrition rates. Building resilience in students, particularly at the start of their…

Feasibility of a computer-delivered driver safety behavior screening and intervention program initiated during an emergency department visit.

Science.gov (United States)

Murphy, Mary; Smith, Lucia; Palma, Anton; Lounsbury, David; Bijur, Polly; Chambers, Paul; Gallagher, E John

2013-01-01

Injuries from motor vehicle crashes are a significant public health problem. The emergency department (ED) provides a setting that may be used to screen for behaviors that increase risk for motor vehicle crashes and provide brief interventions to people who might otherwise not have access to screening and intervention. The purpose of the present study was to (1) assess the feasibility of using a computer-assisted screening program to educate ED patients about risky driving behaviors, (2) evaluate patient acceptance of the computer-based traffic safety educational intervention during an ED visit, and (3) assess postintervention changes in risky driving behaviors. Pre/posteducational intervention involving medically stable adult ED patients in a large urban academic ED serving over 100,000 patients annually. Patients completed a self-administered, computer-based program that queried patients on risky driving behaviors (texting, talking, and other forms of distracted driving) and alcohol use. The computer provided patients with educational information on the dangers of these behaviors and data were collected on patient satisfaction with the program. Staff called patients 1 month post-ED visit for a repeat query. One hundred forty-nine patients participated, and 111 completed 1-month follow up (75%); the mean age was 39 (range: 21-70), 59 percent were Hispanic, and 52 percent were male. Ninety-seven percent of patients reported that the program was easy to use and that they were comfortable receiving this education via computer during their ED visit. All driving behaviors significantly decreased in comparison to baseline with the following reductions reported: talking on the phone, 30 percent; aggressive driving, 30 percent; texting while driving, 19 percent; drowsy driving, 16 percent; driving while multitasking, 12 percent; and drinking and driving, 9 percent. Overall, patients were very satisfied receiving educational information about these behaviors via computer

The Functional Measurement Experiment Builder suite: two Java-based programs to generate and run functional measurement experiments.

Science.gov (United States)

Mairesse, Olivier; Hofmans, Joeri; Theuns, Peter

2008-05-01

We propose a free, easy-to-use computer program that does not requires prior knowledge of computer programming to generate and run experiments using textual or pictorial stimuli. Although the FM Experiment Builder suite was initially programmed for building and conducting FM experiments, it can also be applied for non-FM experiments that necessitate randomized, single, or multifactorial designs. The program is highly configurable, allowing multilingual use and a wide range of different response formats. The outputs of the experiments are Microsoft Excel compatible .xls files that allow easy copy-paste of the results into Weiss's FM CalSTAT program (2006) or any other statistical package. Its Java-based structure is compatible with both Windows and Macintosh operating systems, and its compactness (< 1 MB) makes it easily distributable over the Internet.

[Computer program "PANCREAS"].

Science.gov (United States)

Jakubowicz, J; Jankowski, M; Szomański, B; Switka, S; Zagórowicz, E; Pertkiewicz, M; Szczygieł, B

1998-01-01

Contemporary computer technology allows precise and fast large database analysis. Widespread and common use depends on appropriate, user friendly software, usually lacking in special medical applications. The aim of this work was to develop an integrated system designed to store, explore and analyze data of patients treated for pancreatic cancer. For that purpose the database administration system MS Visual Fox Pro 3.0 was used and special application, according to ISO 9000 series has been developed. The system works under MS Windows 95 with possibility of easy adaptation to MS Windows 3.11 or MS Windows NT by graphic user's interface. The system stores personal data, laboratory results, visual and histological analyses and information on treatment course and complications. However the system archives them and enables the preparation reports of according to individual and statistical needs. Help and security settings allow to work also for one not familiar with computer science.

Analytical SN solutions in heterogeneous slabs using symbolic algebra computer programs

International Nuclear Information System (INIS)

Warsa, J.S.

2002-01-01

A modern symbolic algebra computer program, MAPLE, is used to compute solutions to the well-known analytical discrete ordinates, or S N , solutions in one-dimensional, slab geometry. Symbolic algebra programs compute the solutions with arbitrary precision and are free of spatial discretization error so they can be used to investigate new discretizations for one-dimensional slab, geometry S N methods. Pointwise scalar flux solutions are computed for several sample calculations of interest. Sample MAPLE command scripts are provided to illustrate how easily the theory can be translated into a working solution and serve as a complete tool capable of computing analytical S N solutions for mono-energetic, one-dimensional transport problems

SigrafW: An Easy-to-Use Program for Fitting Enzyme Kinetic Data

Science.gov (United States)

Leone, Francisco Assis; Baranauskas, Jose Augusto; Furriel, Rosa Prazeres Melo; Borin, Ivana Aparecida

2005-01-01

SigrafW is Windows-compatible software developed using the Microsoft[R] Visual Basic Studio program that uses the simplified Hill equation for fitting kinetic data from allosteric and Michaelian enzymes. SigrafW uses a modified Fibonacci search to calculate maximal velocity (V), the Hill coefficient (n), and the enzyme-substrate apparent…

Computer Program Newsletter No. 7

International Nuclear Information System (INIS)

Magnuson, W.G. Jr.

1982-09-01

This issue of the Computer Program Newsletter updates an earlier newsletter (Number 2, September 1979) and focuses on electrical network analysis computer programs. In particular, five network analysis programs (SCEPTRE, SPICE2, NET2, CALAHAN, and EMTP) will be described. The objective of this newsletter will be to provide a very brief description of the input syntax and semantics for each program, highlight their strong and weak points, illustrate how the programs are run at Lawrence Livermore National Laboratory using the Octopus computer network, and present examples of input for each of the programs to illustrate some of the features of each program. In a sense, this newsletter can be used as a quick reference guide to the programs

HEDPIN: a computer program to estimate pinwise power density

International Nuclear Information System (INIS)

Cappiello, M.W.

1976-05-01

A description is given of the digital computer program, HEDPIN. This program, modeled after a previously developed program, POWPIN, provides a means of estimating the pinwise power density distribution in fast reactor triangular pitched pin bundles. The capability also exists for computing any reaction rate of interest at the respective pin positions within an assembly. HEDPIN was developed in support of FTR fuel and test management as well as fast reactor core design and core characterization planning and analysis. The results of a test devised to check out HEDPIN's computational method are given, and the realm of application is discussed. Nearly all programming is in FORTRAN IV. Variable dimensioning is employed to make efficient use of core memory and maintain short running time for small problems. Input instructions, sample problem, and a program listing are also given

Embedded C Programming Using FRDM to Enhance Engineering Students’ Learning Skill

Directory of Open Access Journals (Sweden)

Zulzilawati Jusoh

2017-08-01

Full Text Available Computer programming course that utilizes languages such as C/C++ is always packed with dreary syntax details that consume most of the students’ learning time to obtain ‘grammatically’ correct source code. Consequently, it is difficult for most of the students to apply the theory they have learned in a real life context. Thus, this project proposed a hardware based learning approach for C programming curriculum and reports the effectiveness of using microcontroller board named FRDM-KL05Z to assist teaching and learning activities. The USB-powered microcontroller board is very easy to use and is programmable using C programming language. Students will have the opportunity to learn selection statement with real sensors, touse repetition statement to blink LEDs and utilizing function as well as structure to control actual input and output peripherals. In general we evaluated the students’ response in five criteria namely the students attributes, lecturer’s profile, implementation, facilities and students’ understanding. From the survey, the results in exit survey are higher compared to entrance survey for all criteria. This shows that the students are satisfied with the implementation of the module which has increased their understanding in learning C Programming.

An introduction to programming multiple-processor computers

International Nuclear Information System (INIS)

Hicks, H.R.; Lynch, V.E.

1986-01-01

Fortran applications programs can be executed on multiprocessor computers in either a unitasking (traditional) or multitasking form. The later allows a single job to use more than one processor simultaneously, with a consequent reduction in elapsed time and, perhaps, the cost of the calculation. An introduction to programming in this environment is presented. The concept of synchronization and data sharing using EVENTS and LOCKS are illustrated with examples. The strategy of strong synchronization and the use of synchronization templates are proposed. We emphasize that incorrect multitasking programs can produce irreducible results, which makes debugging more difficult

Computer programs as accounting object

Directory of Open Access Journals (Sweden)

I.V. Perviy

2015-03-01

Full Text Available Existing approaches to the regulation of accounting software as one of the types of intangible assets have been considered. The features and current state of the legal protection of computer programs have been analyzed. The reasons for the need to use patent law as a means of legal protection of individual elements of computer programs have been discovered. The influence of the legal aspects of the use of computer programs for national legislation to their accounting reflection has been analyzed. The possible options for the transfer of rights from computer programs copyright owners have been analyzed that should be considered during creation of software accounting system at the enterprise. Identified and analyzed the characteristics of computer software as an intangible asset under the current law. General economic characteristics of computer programs as one of the types of intangible assets have been grounded. The main distinguishing features of software compared to other types of intellectual property have been all ocated

Computer aided virtual manufacturing using Creo parametric easy to learn step by step guide

CERN Document Server

Kanife, Paul Obiora

2016-01-01

Providing a step-by-step guide for the implementation of virtual manufacturing using Creo Parametric software (formerly known as Pro-Engineer), this book creates an engaging and interactive learning experience for manufacturing engineering students. Featuring graphic illustrations of simulation processes and operations, and written in accessible English to promote user-friendliness, the book covers key topics in the field including: the engraving machining process, face milling, profile milling, surface milling, volume rough milling, expert machining, electric discharge machining (EDM), and area turning using the lathe machining process. Maximising reader insights into how to simulate material removal processes, and how to generate cutter location data and G-codes data, this valuable resource equips undergraduate, postgraduate, BTech and HND students in the fields of manufacturing engineering, computer aided design (CAD) and computer aided engineering (CAE) with transferable skills and knowledge. This book is...

VTGRAPH:Computer graphics program using ReGIS mode

International Nuclear Information System (INIS)

Benamar, M.A.; Benouali, N.; Tchantchane, A.; Azbouche, A.; Tobbeche, S. Centre de Developpement des Techniques Nucleaires, Laboratoire des Techniques Nucleaires, Algiers

1993-02-01

A computer graphics program has been developed for plotting spectra generated from different nuclear analysis techniques and discrete data for the VT240 graphics and compatible IBM PC using ST240 configuration. We have used the Remote Graphics Instruction Set (ReGIS) commands

Transportation dose analysis using an interactive menu-driven computer program

International Nuclear Information System (INIS)

Strenge, D.L.; Peloquin, R.A.

1984-10-01

An easy-to-use software package is described for performing radiological consequence analyses for transportation scenarios involving truck or rail transport of spent fuel, HLW and other radioactive waste forms. The consequence analysis is based on the unit radiological factors (person-rem/km) developed by the Transportation Technology Center (Sandia National Laboratories). These generic unit radiological factors are combined with user-supplied information describing transporation distances, routes and waste types to estimate total exposure of the population. The software was developed for use in preparing the Environmental Assessment for the Monitored Retrievable Storage Program and is suitable for such analyses as siting waste repositories. The key feature of the software is the user-oriented, menu-driven interactive input mode available as an alternative to formatted input. The interactive input option allows the user to supply all input data, edit the data and run the program. Output reports can be diverted to a high-speed printer

EasyPipes - Final/annual report; EasyPipes - Rapport final/annuel

Energy Technology Data Exchange (ETDEWEB)

Gallinelli, P.; Thomann, P.; Weber, W. [University of Geneva, Geneva (Switzerland); Hollmuller, P. [University of Lisbon, Lisbon (Portugal)

2009-06-15

This report describes follow-up activities in the field of design of buried air-to-ground heat exchangers for ventilated low-energy buildings. Such heat exchangers preheat the inlet air in winter and cool it in summer, contributing to significantly reduce the energy consumption and improve indoor thermal comfort. They have been extensively studied at the University of Geneva, Switzerland by P. Hollmuller, B. Lachal et al. since 2001. The corresponding reports can be found in the ETDE data base. The present and latest report of the series deals with implemented improvements of the computer simulation program for the dimensioning of such heat exchangers. A previous, experimentally and analytically validated version, based on TRNSYS formalism, was not enough user-friendly for architects and engineers in the practice. A new interface called EasyPipes, based on the windows input and output formalism and including graphical features, has been developed. Details are reported on.

RATGRAPH: Computer Graphing of Rational Functions.

Science.gov (United States)

Minch, Bradley A.

1987-01-01

Presents an easy-to-use Applesoft BASIC program that graphs rational functions and any asymptotes that the functions might have. Discusses the nature of rational functions, graphing them manually, employing a computer to graph rational functions, and describes how the program works. (TW)

Experiences Using an Open Source Software Library to Teach Computer Vision Subjects

Science.gov (United States)

Cazorla, Miguel; Viejo, Diego

2015-01-01

Machine vision is an important subject in computer science and engineering degrees. For laboratory experimentation, it is desirable to have a complete and easy-to-use tool. In this work we present a Java library, oriented to teaching computer vision. We have designed and built the library from the scratch with emphasis on readability and…

Use of a radiation therapy treatment planning computer in a hospital health physics program

International Nuclear Information System (INIS)

Addison, S.J.

1984-01-01

An onsite treatment planning computer has become state of the art in the care of radiation therapy patients, but in most installations the computer is used for therapy planning a diminutive amount of the day. At St. Mary's Hospital, arrangements have been negotiated for part time use of the treatment planning computer for health physics purposes. Computerized Medical Systems, Inc. (CMS) produces the Modulex radiotherapy planning system which is programmed in MUMPS, a user oriented language specially adapted for handling text string information. St. Mary's Hospital's CMS computer has currently been programmed to assist in data collection and write-up of diagnostic x-ray surveys, meter calibrations, and wipe/leak tests. The computer is setup to provide timely reminders of tests and surveys, and billing for consultation work. Programs are currently being developed for radionuclide inventories. Use of a therapy planning computer for health physics purposes can enhance the radiation safety program and provide additional grounds for the acquisition of such a computer system

Programming in biomolecular computation

DEFF Research Database (Denmark)

Hartmann, Lars Røeboe; Jones, Neil; Simonsen, Jakob Grue

2011-01-01

Our goal is to provide a top-down approach to biomolecular computation. In spite of widespread discussion about connections between biology and computation, one question seems notable by its absence: Where are the programs? We identify a number of common features in programming that seem...... conspicuously absent from the literature on biomolecular computing; to partially redress this absence, we introduce a model of computation that is evidently programmable, by programs reminiscent of low-level computer machine code; and at the same time biologically plausible: its functioning is defined...... by a single and relatively small set of chemical-like reaction rules. Further properties: the model is stored-program: programs are the same as data, so programs are not only executable, but are also compilable and interpretable. It is universal: all computable functions can be computed (in natural ways...

PHY·FI: fast and easy online creation and manipulation of phylogeny color figures

Directory of Open Access Journals (Sweden)

Fredslund Jakob

2006-06-01

Full Text Available Abstract Background The need to depict a phylogeny, or some other kind of abstract tree, is very frequently experienced by researchers from a broad range of biological and computational disciplines. Thousands of papers and talks include phylogeny figures, and often during everyday work, one would like to quickly get a graphical display of, e.g., the phylogenetic relationship between a set of sequences as calculated by an alignment program such as ClustalW or the phylogenetic package Phylip. A wealth of software tools capable of tree drawing exists; most are comprehensive packages that also perform various types of analysis, and hence they are available only for download and installing. Some online tools exist, too. Results This paper presents an online tool, PHY·FI, which encompasses all the qualities of existing online programs and adds functionality to hopefully eliminate the need for post-processing the phylogeny figure in some other general-purpose graphics program. PHY·FI is versatile, easy-to-use and fast, and supports comprehensive graphical control, several download image formats, and the possibility of dynamically collapsing groups of nodes into named subtrees (e.g. "Primates". The user can create a color figure from any phylogeny, or other kind of tree, represented in the widely used parenthesized Newick format. Conclusion PHY·FI is fast and easy to use, yet still offers full color control, tree manipulation, and several image formats. It does not require any downloading and installing, and thus any internet user regardless of computer skills, and computer platform, can benefit from it. PHY·FI is free for all and is available from this web address: http://cgi-www.daimi.au.dk/cgi-chili/phyfi/go

BASIC program to compute uranium density and void volume fraction in laboratory-scale uranium silicide aluminum dispersion plate-type fuel

International Nuclear Information System (INIS)

Ugajin, Mitsuhiro

1991-05-01

BASIC program simple and easy to operate has been developed to compute uranium density and void volume fraction for laboratory-scale uranium silicide aluminum dispersion plate-type fuel, so called miniplate. An example of the result of calculation is given in order to demonstrate how the calculated void fraction correlates with the microstructural distribution of the void in a miniplate prepared in our laboratory. The program is also able to constitute data base on important parameters for miniplates from experimentally-determined values of density, weight of each constituent and dimensions of miniplates. Utility programs pertinent to the development of the BASIC program are also given which run in the popular MS-DOS environment. All the source lists are attached and brief description for each program is made. (author)

Analysis of three-phase power-supply systems using computer-aided design programs

International Nuclear Information System (INIS)

Oberst, E.F.

1977-01-01

A major concern of every designer of large, three-phase power-supply systems is the protection of system components from overvoltage transients. At present, three computer-aided circuit design programs are available in the Magnetic Fusion Energy (MFE) National Computer Center that can be used to analyze three-phase power systems: MINI SCEPTRE, SPICE I, and SPICE II. These programs have been used at Lawrence Livermore Laboratory (LLL) to analyze the operation of a 200-kV dc, 20-A acceleration power supply for the High Voltage Test Stand. Various overvoltage conditions are simulated and the effectiveness of system protective devices is observed. The simulated overvoltage conditions include such things as circuit breaker openings, pulsed loading, and commutation voltage surges in the rectifiers. These examples are used to illustrate the use of the computer-aided, circuit-design programs discussed in this paper

Design and performance analysis of solid-propellant rocket motors using a simplified computer program

Science.gov (United States)

Sforzini, R. H.

1972-01-01

An analysis and a computer program are presented which represent a compromise between the more sophisticated programs using precise burning geometric relations and the textbook type of solutions. The program requires approximately 900 computer cards including a set of 20 input data cards required for a typical problem. The computer operating time for a single configuration is approximately 1 minute and 30 seconds on the IBM 360 computer. About l minute and l5 seconds of the time is compilation time so that additional configurations input at the same time require approximately 15 seconds each. The program uses approximately 11,000 words on the IBM 360. The program is written in FORTRAN 4 and is readily adaptable for use on a number of different computers: IBM 7044, IBM 7094, and Univac 1108.

A program package for solving linear optimization problems

International Nuclear Information System (INIS)

Horikami, Kunihiko; Fujimura, Toichiro; Nakahara, Yasuaki

1980-09-01

Seven computer programs for the solution of linear, integer and quadratic programming (four programs for linear programming, one for integer programming and two for quadratic programming) have been prepared and tested on FACOM M200 computer, and auxiliary programs have been written to make it easy to use the optimization program package. The characteristics of each program are explained and the detailed input/output descriptions are given in order to let users know how to use them. (author)

PRISIM: a computer program that makes PRA useful

International Nuclear Information System (INIS)

Fussell, J.B.; Campbell, D.J.; Glynn, J.C.; Burdick, G.R.

1986-01-01

PRISIM is an IBM personal computer program that translates probabilistic risk assessment (PRA) information and calculates additional PRA type information for use by those who are not PRA experts. Specifically, PRISIM was developed for the US Nuclear Regulatory Commission for use by their resident inspectors at nuclear power plants. Inspector activities are either scheduled or are in response to a particular status of a plant. PRISIM is useful for either activity

Finite Volume Based Computer Program for Ground Source Heat Pump System

Energy Technology Data Exchange (ETDEWEB)

Menart, James A. [Wright State University

2013-02-22

. The price paid for the three-dimensional detail is the large computational times required with GEO3D. The computational times required for GEO2D are reasonable, a few minutes for a 20 year simulation. For a similar simulation, GEO3D takes days of computational time. Because of the small simulation times with GEO2D, a number of attractive features have been added to it. GEO2D has a user friendly interface where inputs and outputs are all handled with GUI (graphical user interface) screens. These GUI screens make the program exceptionally easy to use. To make the program even easier to use a number of standard input options for the most common GSHP situations are provided to the user. For the expert user, the option still exists to enter their own detailed information. To further help designers and GSHP customers make decisions about a GSHP heating and cooling system, cost estimates are made by the program. These cost estimates include a payback period graph to show the user where their GSHP system pays for itself. These GSHP simulation tools should be a benefit to the advancement of GSHP systems.

Theory of computation

CERN Document Server

Tourlakis, George

2012-01-01

Learn the skills and acquire the intuition to assess the theoretical limitations of computer programming Offering an accessible approach to the topic, Theory of Computation focuses on the metatheory of computing and the theoretical boundaries between what various computational models can do and not do—from the most general model, the URM (Unbounded Register Machines), to the finite automaton. A wealth of programming-like examples and easy-to-follow explanations build the general theory gradually, which guides readers through the modeling and mathematical analysis of computational pheno

Obstetrical ultrasound data-base management system by using personal computer

International Nuclear Information System (INIS)

Jeon, Hae Jeong; Park, Jeong Hee; Kim, Soo Nyung

1993-01-01

A computer program which performs obstetric calculations on Clipper Language using the data from ultrasonography was developed for personal computer. It was designed for fast assessment of fetal development, prediction of gestational age, and weight from ultrasonographic measurements which included biparietal diameter, femur length, gestational sac, occipito-frontal diameter, abdominal diameter, and etc. The Obstetrical-Ultrasound Data-Base Management System was tested for its performance. The Obstetrical-Ultrasound Data-Base Management System was very useful in patient management with its convenient data filing, easy retrieval of previous report, prompt but accurate estimation of fetal growth and skeletal anomaly and production of equation and growth curve for pregnant women

Kinoscope: An Open-Source Computer Program for Behavioral Pharmacologists

Directory of Open Access Journals (Sweden)

Nikolaos Kokras

2017-05-01

Full Text Available Behavioral analysis in preclinical neuropsychopharmacology relies on the accurate measurement of animal behavior. Several excellent solutions for computer-assisted behavioral analysis are available for specialized behavioral laboratories wishing to invest significant resources. Herein, we present an open source straightforward software solution aiming at the rapid and easy introduction to an experimental workflow, and at the improvement of training staff members in a better and more reproducible manual scoring of behavioral experiments with the use of visual aids-maps. Currently the program readily supports the Forced Swim Test, Novel Object Recognition test and the Elevated Plus maze test, but with minor modifications can be used for scoring virtually any behavioral test. Additional modules, with predefined templates and scoring parameters, are continuously added. Importantly, the prominent use of visual maps has been shown to improve, in a student-engaging manner, the training and auditing of scoring in behavioral rodent experiments.

Computerization of radiology departmental management using the personal computer: application in medium sized hospital

International Nuclear Information System (INIS)

Ahn, Woo Hyun

1992-01-01

The author developed a computer program for use in registration, monthly statistics, printing of reports, data storage and retrieval in the Radiology department. This program has been used in the Department of Radiology, MoonHwa Hospital since November 1990. This program was written in FoxBASE language, consisted of two independent subprograms, one installed in a registration computer without a printer and another in a reporting computer with a printer. The subprograms were designed to link their data by floppy disk. Each computer's hard disk contained permanent files for retrieval and temporary files for data input. All permanent files were indexed on several keywords including the patient's identification data. 1. Registration was performed easily and rapidly. 2. A monthly statistic was obtained simply. 3. Retrieval of the results of previous radiologic studies, printing of report, storage and indexing of data were achieved automatically. This program had merits of simple operation, large storage capacity, rapid retrieval speed, relative low price, easy adjustment for other hospitals. Therefore this program is considered to be an economic substitute for computerization of radiology departmental management in medium sized hospitals

The Application of Visual Basic Computer Programming Language to Simulate Numerical Iterations

Directory of Open Access Journals (Sweden)

Abdulkadir Baba HASSAN

2006-06-01

Full Text Available This paper examines the application of Visual Basic Computer Programming Language to Simulate Numerical Iterations, the merit of Visual Basic as a Programming Language and the difficulties faced when solving numerical iterations analytically, this research paper encourage the uses of Computer Programming methods for the execution of numerical iterations and finally fashion out and develop a reliable solution using Visual Basic package to write a program for some selected iteration problems.

Easy calculations of lod scores and genetic risks on small computers.

Science.gov (United States)

Lathrop, G M; Lalouel, J M

1984-01-01

A computer program that calculates lod scores and genetic risks for a wide variety of both qualitative and quantitative genetic traits is discussed. An illustration is given of the joint use of a genetic marker, affection status, and quantitative information in counseling situations regarding Duchenne muscular dystrophy. PMID:6585139

Mississippi Curriculum Framework for Computer Information Systems Technology. Computer Information Systems Technology (Program CIP: 52.1201--Management Information Systems & Business Data). Computer Programming (Program CIP: 52.1201). Network Support (Program CIP: 52.1290--Computer Network Support Technology). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for two programs in the state's postsecondary-level computer information systems technology cluster: computer programming and network support. Presented in the introduction are program descriptions and suggested course…

AGRIS: Description of computer programs

International Nuclear Information System (INIS)

Schmid, H.; Schallaboeck, G.

1976-01-01

The set of computer programs used at the AGRIS (Agricultural Information System) Input Unit at the IAEA, Vienna, Austria to process the AGRIS computer-readable data is described. The processing flow is illustrated. The configuration of the IAEA's computer, a list of error messages generated by the computer, the EBCDIC code table extended for AGRIS and INIS, the AGRIS-6 bit code, the work sheet format, and job control listings are included as appendixes. The programs are written for an IBM 370, model 145, operating system OS or VS, and require a 130K partition. The programming languages are PL/1 (F-compiler) and Assembler

Promoting healthy computer use among middle school students: a pilot school-based health promotion program.

Science.gov (United States)

Ciccarelli, Marina; Portsmouth, Linda; Harris, Courtenay; Jacobs, Karen

2012-01-01

Introduction of notebook computers in many schools has become integral to learning. This has increased students' screen-based exposure and the potential risks to physical and visual health. Unhealthy computing behaviours include frequent and long durations of exposure; awkward postures due to inappropriate furniture and workstation layout, and ignoring computer-related discomfort. Describe the framework for a planned school-based health promotion program to encourage healthy computing behaviours among middle school students. This planned program uses a community- based participatory research approach. Students in Year 7 in 2011 at a co-educational middle school, their parents, and teachers have been recruited. Baseline data was collected on students' knowledge of computer ergonomics, current notebook exposure, and attitudes towards healthy computing behaviours; and teachers' and self-perceived competence to promote healthy notebook use among students, and what education they wanted. The health promotion program is being developed by an inter-professional team in collaboration with students, teachers and parents to embed concepts of ergonomics education in relevant school activities and school culture. End of year changes in reported and observed student computing behaviours will be used to determine the effectiveness of the program. Building a body of evidence regarding physical health benefits to students from this school-based ergonomics program can guide policy development on the healthy use of computers within children's educational environments.

A Computer Program for Simplifying Incompletely Specified Sequential Machines Using the Paull and Unger Technique

Science.gov (United States)

Ebersole, M. M.; Lecoq, P. E.

1968-01-01

This report presents a description of a computer program mechanized to perform the Paull and Unger process of simplifying incompletely specified sequential machines. An understanding of the process, as given in Ref. 3, is a prerequisite to the use of the techniques presented in this report. This process has specific application in the design of asynchronous digital machines and was used in the design of operational support equipment for the Mariner 1966 central computer and sequencer. A typical sequential machine design problem is presented to show where the Paull and Unger process has application. A description of the Paull and Unger process together with a description of the computer algorithms used to develop the program mechanization are presented. Several examples are used to clarify the Paull and Unger process and the computer algorithms. Program flow diagrams, program listings, and a program user operating procedures are included as appendixes.

Functional programming for computer vision

Science.gov (United States)

Breuel, Thomas M.

1992-04-01

Functional programming is a style of programming that avoids the use of side effects (like assignment) and uses functions as first class data objects. Compared with imperative programs, functional programs can be parallelized better, and provide better encapsulation, type checking, and abstractions. This is important for building and integrating large vision software systems. In the past, efficiency has been an obstacle to the application of functional programming techniques in computationally intensive areas such as computer vision. We discuss and evaluate several 'functional' data structures for representing efficiently data structures and objects common in computer vision. In particular, we will address: automatic storage allocation and reclamation issues; abstraction of control structures; efficient sequential update of large data structures; representing images as functions; and object-oriented programming. Our experience suggests that functional techniques are feasible for high- performance vision systems, and that a functional approach simplifies the implementation and integration of vision systems greatly. Examples in C++ and SML are given.

Introduction to elementary computational modeling essential concepts, principles, and problem solving

CERN Document Server

Garrido, Jose

2011-01-01

… offers a solid first step into scientific and technical computing for those just getting started. … Through simple examples that are both easy to conceptualize and straightforward to express mathematically (something that isn't trivial to achieve), Garrido methodically guides readers from problem statement and abstraction through algorithm design and basic programming. His approach offers those beginning in a scientific or technical discipline something unique; a simultaneous introduction to programming and computational thinking that is very relevant to the practical application of computin

Computerized management of radiology department: Installation and use of local area network(LAN) by personal computers

International Nuclear Information System (INIS)

Lee, Young Joon; Han, Kook Sang; Geon, Do Ig; Sol, Chang Hyo; Kim, Byung Soo

1993-01-01

There is increasing need for network connecting personal computers(PC) together. Thus local area network(LAN) emerged, which was designed to allow multiple computers to access and share multiple files and programs and expensive peripheral devices and to communicate with each user. We build PC-LAN in our department that consisted of 1) hardware-9 sets of personal computers(IBM compatible 80386 DX, 1 set; 80286 AT, 8 sets) and cables and network interface cards (Ethernet compatible, 16 bits) that connected PC and peripheral devices 2) software - network operating system and database management system. We managed this network for 6 months. The benefits of PC-LAN were 1) multiuser (share multiple files and programs, peripheral devices) 2) real data processing 3) excellent expandability and flexibility, compatibility, easy connectivity 4) single cable for networking) rapid data transmission 5) simple and easy installation and management 6) using conventional PC's software running under DOS(Disk Operating System) without transformation 7) low networking cost. In conclusion, PC-lan provides an easier and more effective way to manage multiuser database system needed at hospital departments instead of more expensive and complex network of minicomputer or mainframe

Rapid prototyping of an adaptive light-source for mobile manipulators with EasyKit and EasyLab

Science.gov (United States)

Wojtczyk, Martin; Barner, Simon; Geisinger, Michael; Knoll, Alois

2008-08-01

While still not common in day-to-day business, mobile robot platforms form a growing market in robotics. Mobile platforms equipped with a manipulator for increased flexibility have been used successfully in biotech laboratories for sample management as shown on the well-known ESACT meetings. Navigation and object recognition is carried out by the utilization of a mounted machine vision camera. To cope with the different illumination conditions in a large laboratory, development of an adaptive light source was indispensable. We present our approach of rapid developing a computer controlled, adaptive LED light within one single business day, by utilizing the hardware toolbox EasyKit and our appropriate software counterpart EasyLab.

Finite difference computing with exponential decay models

CERN Document Server

Langtangen, Hans Petter

2016-01-01

This text provides a very simple, initial introduction to the complete scientific computing pipeline: models, discretization, algorithms, programming, verification, and visualization. The pedagogical strategy is to use one case study – an ordinary differential equation describing exponential decay processes – to illustrate fundamental concepts in mathematics and computer science. The book is easy to read and only requires a command of one-variable calculus and some very basic knowledge about computer programming. Contrary to similar texts on numerical methods and programming, this text has a much stronger focus on implementation and teaches testing and software engineering in particular. .

Programming in biomolecular computation

DEFF Research Database (Denmark)

Hartmann, Lars Røeboe; Jones, Neil; Simonsen, Jakob Grue

2010-01-01

in a strong sense: a universal algorithm exists, that is able to execute any program, and is not asymptotically inefficient. A prototype model has been implemented (for now in silico on a conventional computer). This work opens new perspectives on just how computation may be specified at the biological level......., by programs reminiscent of low-level computer machine code; and at the same time biologically plausible: its functioning is defined by a single and relatively small set of chemical-like reaction rules. Further properties: the model is stored-program: programs are the same as data, so programs are not only...... executable, but are also compilable and interpretable. It is universal: all computable functions can be computed (in natural ways and without arcane encodings of data and algorithm); it is also uniform: new “hardware” is not needed to solve new problems; and (last but not least) it is Turing complete...

The image database management system of teaching file using personal computer

International Nuclear Information System (INIS)

Shin, M. J.; Kim, G. W.; Chun, T. J.; Ahn, W. H.; Baik, S. K.; Choi, H. Y.; Kim, B. G.

1995-01-01

For the systemic management and easy using of teaching file in radiology department, the authors tried to do the setup of a database management system of teaching file using personal computer. We used a personal computer (IBM PC compatible, 486DX2) including a image capture card(Window vision, Dooin Elect, Seoul, Korea) and video camera recorder (8mm, CCD-TR105, Sony, Tokyo, Japan) for the acquisition and storage of images. We developed the database program by using Foxpro for Window 2.6(Microsoft, Seattle, USA) executed in the Window 3.1 (Microsoft, Seattle, USA). Each datum consisted of hospital number, name, sex, age, examination date, keyword, radiologic examination modalities, final diagnosis, radiologic findings, references and representative images. The images were acquired and stored as bitmap format (8 bitmap, 540 X 390 ∼ 545 X 414, 256 gray scale) and displayed on the 17 inch-flat monitor(1024 X 768, Samtron, Seoul, Korea). Without special devices, the images acquisition and storage could be done on the reading viewbox, simply. The image quality on the computer's monitor was less than the one of original film on the viewbox, but generally the characteristics of each lesions could be differentiated. Easy retrieval of data was possible for the purpose of teaching file system. Without high cost appliances, we could consummate the image database system of teaching file using personal computer with relatively inexpensive method

The use of automatic programming techniques for fault tolerant computing systems

Science.gov (United States)

Wild, C.

1985-01-01

It is conjectured that the production of software for ultra-reliable computing systems such as required by Space Station, aircraft, nuclear power plants and the like will require a high degree of automation as well as fault tolerance. In this paper, the relationship between automatic programming techniques and fault tolerant computing systems is explored. Initial efforts in the automatic synthesis of code from assertions to be used for error detection as well as the automatic generation of assertions and test cases from abstract data type specifications is outlined. Speculation on the ability to generate truly diverse designs capable of recovery from errors by exploring alternate paths in the program synthesis tree is discussed. Some initial thoughts on the use of knowledge based systems for the global detection of abnormal behavior using expectations and the goal-directed reconfiguration of resources to meet critical mission objectives are given. One of the sources of information for these systems would be the knowledge captured during the automatic programming process.

A Model of Computation for Bit-Level Concurrent Computing and Programming: APEC

Science.gov (United States)

Ajiro, Takashi; Tsuchida, Kensei

A concurrent model of computation and a language based on the model for bit-level operation are useful for developing asynchronous and concurrent programs compositionally, which frequently use bit-level operations. Some examples are programs for video games, hardware emulation (including virtual machines), and signal processing. However, few models and languages are optimized and oriented to bit-level concurrent computation. We previously developed a visual programming language called A-BITS for bit-level concurrent programming. The language is based on a dataflow-like model that computes using processes that provide serial bit-level operations and FIFO buffers connected to them. It can express bit-level computation naturally and develop compositionally. We then devised a concurrent computation model called APEC (Asynchronous Program Elements Connection) for bit-level concurrent computation. This model enables precise and formal expression of the process of computation, and a notion of primitive program elements for controlling and operating can be expressed synthetically. Specifically, the model is based on a notion of uniform primitive processes, called primitives, that have three terminals and four ordered rules at most, as well as on bidirectional communication using vehicles called carriers. A new notion is that a carrier moving between two terminals can briefly express some kinds of computation such as synchronization and bidirectional communication. The model's properties make it most applicable to bit-level computation compositionally, since the uniform computation elements are enough to develop components that have practical functionality. Through future application of the model, our research may enable further research on a base model of fine-grain parallel computer architecture, since the model is suitable for expressing massive concurrency by a network of primitives.

SALP-3: A computer program for fault-tree analysis. Description and how-to-use. (Sensitivity analysis by list processing)

International Nuclear Information System (INIS)

Contini, S.; Astolfi, M.; Muysenberg, C.L. van den; Volta, G.

1979-01-01

The main characteristics and the how-to-use of the computer program SALP-3 for the analysis of coherent systems are described. The program is writen in PL/1 for the IBM/370-165. A syntactic analysis is made for the imput (fault-tree and data) and appropriate messages are supplied, should and error take place. The significant minimal cut sets (MCS) are searched by the use of algorithms based on the direct manipulation of the tree. The MCS, of whichever order, are supplied in output in order of importance with reference to a given probability threshold. The computer program SALP-3 represents only the intermediate results of a project whose objective is the implementation of a computer program for the analysis of both coherent and non-coherent structure functions, and, finally, for the automatic event tree analysis. The last part of the report illustrates the developments regarding the improvement in progress

A computer program to automatically control the multi leaf collimator; Un programa informatico para el control automatico del colimador multilamina

Energy Technology Data Exchange (ETDEWEB)

Sanchez Galiano, P.; Crelgo Alonso, D.; Gonzalez Sancho, J. M.; Fernandez Garcia, J.; Vivanco Parellada, J.

2012-07-01

A computer program to automatically analyze strip test images for MLC leaf positioning quality assurance was developed and assessed. The program is fed with raw individual segment images in DICOM format supplied by the accelerator software and it automatically carries out all the steps in the leaf positioning quality control test (image merging, image analysis, storing and reporting). A comprehensive description of the software, that allows a relatively easy implementation, is shown. To check the performance of the program, a series of test fields with intentionally introduced errors were used. The obtained Measurement uncertainty of any individual leaf position was lower than 0.15 mm with gantry at 0 degree centigrade. At another gantry angles (90 degree centigrade, 180 degree centigrade and 270 degree centigrade) the dispersion of the measurements was larger, specially towards the external positions of the leafs, probably due to a slight rotation of the EPID caused by gravity. That reduces the useful area of the MLC to control when gantry angles different from 0 degree centigrade are used. In conclusion, this technique is fast enough to be carried out in a daily basis being also very precise and reliable. (Author)

Development of computer assisted learning program using cone beam projection for head radiography

International Nuclear Information System (INIS)

Nakazeko, Kazuma; Araki, Misao; Kajiwara, Hironori; Watanabe, Hiroyuki; Kuwayama, Jun; Karube, Shuhei; Hashimoto, Takeyuki; Shinohara, Hiroyuki

2012-01-01

We present a computer assisted learning (CAL) program to simulate head radiography. The program provides cone beam projections of a target volume, simulating three-dimensional computed tomography (CT) of a head phantom. The generated image is 512 x 512 x 512 pixels with each pixel 0.6 mm on a side. The imaging geometry, such as X-ray tube orientation and phantom orientation, can be varied. The graphical user interface (GUI) of the CAL program allows the study of the effects of varying the imaging geometry; each simulated projection image is shown quickly in an adjoining window. Simulated images with an assigned geometry were compared with the image obtained using the standard geometry in clinical use. The accuracy of the simulated image was verified through comparison with the image acquired using radiography of the head phantom, subsequently processed with a computed radiography system (CR image). Based on correlation coefficient analysis and visual assessment, it was concluded that the CAL program can satisfactorily simulate the CR image. Therefore, it should be useful for the training of head radiography. (author)

Connection and record programs, used for the PM-6 peripheral computer

International Nuclear Information System (INIS)

Karabutova, N.E.; Tikhomirova, I.N.

1976-01-01

''Pochta'' monitor program is described which is intended for the organization of an inter-program communication of channel and monitor modules of PM-6 peripheral computer. Protocol programs ''Protocol-Consule'' and ''Protocol'' are considered. Those are used for the printout of protocol texts with typewriters and teleprinters. ''Recording'' standard routine is given, which is meant for code translation. Detailed instructions are presented on utilization of all the above-mentioned programs

[Construction of abridged life table for health evaluation of local resident using Excel program].

Science.gov (United States)

Chen, Qingsha; Wang, Feng; Li, Xiaozhen; Yang, Jian; Yu, Shouyi; Hu, Jun

2012-05-01

To provide an easy computational tool for evaluating the health condition of local residents. An abridged life table was programmed by applying mathematical functions and formula in Excel program and tested with the real study data to evaluate the results computed. The Excel was capable of computing group death probability of age in the life table ((n)q(x)), number of survivors (l(x)), number of death ((n)d(x)), survival per person-year ((n)L(x)), survival total per person-year (T(x)) and life expectancy (e(x)). The calculated results were consistent with those by SAS. The abridged life table constructed using Microsoft Excel can conveniently and accurately calculate the relevant indices for evaluating the health condition of the residents.

Interactive computer-based training program for radiological workers

International Nuclear Information System (INIS)

Trinoskey, P.A.; Camacho, P.I.; Wells, L.

2000-01-01

Lawrence Livermore National Laboratory is redesigning its existing Computer-Based Training (CBT) programs for radiological workers. The redesign represents a major effort that is aimed at producing a single highly interactive and flexible CBT program. The new CBT program is designed to address a variety of radiological workers, including researchers, x-ray operators, and individuals working in tritium, uranium, plutonium, and accelerator facilities. The program addresses the diversity of backgrounds found at a national laboratory. The CBT program includes photographs, line drawings and illustrations, sound, video, and simulations, and it allows for easy insertion and replacement of text, graphics, sound, and video. The new design supports timely updates and customization for use at other University of California sites. The CBT program is divided into ten basic modules. Introduction and Lessons Learned, History and Uses, Fundamentals, Background Radiation, Biological Effects of Radiation, Characteristics of Radionuclides, Radiological Controls, Monitoring, Emergency Response, Responsibilities. Some of the main modules features as many as seven or eight submodules. For example, the module on Characteristics of Radionuclides features submodules on common radionuclides, tritium uranium, plutonium, x-ray machines, E-beam devices, radiographic devices, and accelerators. Required submodules are tailored to an individual's type of work and facility, and they are determined by the answers to an onscreen questionnaire given at the outset of training. Individuals can challenge most individual modules, but certain submodules will be mandatory based on the initial survey. For example, individuals working in the uranium facility will be required to complete the submodule on 'History and Uses of Uranium'. However, all other submodules under the main module, 'History and Uses', will be available if selected for preview. For each module, an opportunity is provided for further

Using Scripting Languages to Teach Programming

OpenAIRE

Syropoulos, Apostolos; Stavrianos, Athanasios

2014-01-01

Nowadays, scripting programming languages like Python, Perl and Ruby are widely used in system programming, scientific computing, etc. Although solving a particular problem in these languages requires less time, less programming effort, and less concepts to be taught to achieve the desired goal, still they are not used as teaching tools. Therefore, the use of scripting languages as a teaching vehicle for programming course is very promising. On the other hand, GUI programming, when performed ...

An introduction to NASA's advanced computing program: Integrated computing systems in advanced multichip modules

Science.gov (United States)

Fang, Wai-Chi; Alkalai, Leon

1996-01-01

Recent changes within NASA's space exploration program favor the design, implementation, and operation of low cost, lightweight, small and micro spacecraft with multiple launches per year. In order to meet the future needs of these missions with regard to the use of spacecraft microelectronics, NASA's advanced flight computing (AFC) program is currently considering industrial cooperation and advanced packaging architectures. In relation to this, the AFC program is reviewed, considering the design and implementation of NASA's AFC multichip module.

Multi-level programming paradigm for extreme computing

International Nuclear Information System (INIS)

Petiton, S.; Sato, M.; Emad, N.; Calvin, C.; Tsuji, M.; Dandouna, M.

2013-01-01

In order to propose a framework and programming paradigms for post peta-scale computing, on the road to exa-scale computing and beyond, we introduced new languages, associated with a hierarchical multi-level programming paradigm, allowing scientific end-users and developers to program highly hierarchical architectures designed for extreme computing. In this paper, we explain the interest of such hierarchical multi-level programming paradigm for extreme computing and its well adaptation to several large computational science applications, such as for linear algebra solvers used for reactor core physic. We describe the YML language and framework allowing describing graphs of parallel components, which may be developed using PGAS-like language such as XMP, scheduled and computed on supercomputers. Then, we propose experimentations on supercomputers (such as the 'K' and 'Hooper' ones) of the hybrid method MERAM (Multiple Explicitly Restarted Arnoldi Method) as a case study for iterative methods manipulating sparse matrices, and the block Gauss-Jordan method as a case study for direct method manipulating dense matrices. We conclude proposing evolutions for this programming paradigm. (authors)

THE TRAVELLING SALESMAN PROBLEM IN THE ENGINEERING EDUCATION PROGRAMMING CURRICULUM

Directory of Open Access Journals (Sweden)

Yevgeny Gayev

2017-11-01

Full Text Available Objective: To make students familiar with the famous Traveling Salesman Problem (TSP and suggest the latter to become a common exercise in engineering programming curriculum provided the students master computer science in the easy programming environment MATLAB. Methods: easy programming in MATLAB makes true such modern educational approach as “discovery based” methodology. Results: a MATLAB TSP-program oriented to Ukrainian map is suggested that allows to pictorially demonstrate the process of optimal route search with an option to decelerate or accelerate the demonstration. The program is guessed to be useful both for learning the TSP as one of fundamental logistics problems and as an intriguing programming curriculum excersize. Several sub-programs according to key stone Computer Science Curriculum have also been suggested. This lies in line with recent “discovery based” learning methodology. Discussion: we explain how to create this program for visual discrete optimization, suggest required subprograms belonging to key stone programming algorithms including rather modern graphical user interface (GUI, how to use this MATLAB TSP-program for demonstration the drastical grows of solution time required. Conclusions: easy programming being realized in MATLAB makes dificult curriculum problems attractive to students; it focuses them to main problem’ features, laws and algorithms implementing the “discovery based” methodology in such a way.

Recovery Act: Finite Volume Based Computer Program for Ground Source Heat Pump Systems

Energy Technology Data Exchange (ETDEWEB)

James A Menart, Professor

2013-02-22

price paid for the three-dimensional detail is the large computational times required with GEO3D. The computational times required for GEO2D are reasonable, a few minutes for a 20 year simulation. For a similar simulation, GEO3D takes days of computational time. Because of the small simulation times with GEO2D, a number of attractive features have been added to it. GEO2D has a user friendly interface where inputs and outputs are all handled with GUI (graphical user interface) screens. These GUI screens make the program exceptionally easy to use. To make the program even easier to use a number of standard input options for the most common GSHP situations are provided to the user. For the expert user, the option still exists to enter their own detailed information. To further help designers and GSHP customers make decisions about a GSHP heating and cooling system, cost estimates are made by the program. These cost estimates include a payback period graph to show the user where their GSHP system pays for itself. These GSHP simulation tools should be a benefit to the advancement of GSHP system

Pre-Service Teachers' Uses of and Barriers from Adopting Computer-Assisted Language Learning (CALL) Programs

Science.gov (United States)

Samani, Ebrahim; Baki, Roselan; Razali, Abu Bakar

2014-01-01

Success in implementation of computer-assisted language learning (CALL) programs depends on the teachers' understanding of the roles of CALL programs in education. Consequently, it is also important to understand the barriers teachers face in the use of computer-assisted language learning (CALL) programs. The current study was conducted on 14…

Introducing Seismic Tomography with Computational Modeling

Science.gov (United States)

Neves, R.; Neves, M. L.; Teodoro, V.

2011-12-01

Learning seismic tomography principles and techniques involves advanced physical and computational knowledge. In depth learning of such computational skills is a difficult cognitive process that requires a strong background in physics, mathematics and computer programming. The corresponding learning environments and pedagogic methodologies should then involve sets of computational modelling activities with computer software systems which allow students the possibility to improve their mathematical or programming knowledge and simultaneously focus on the learning of seismic wave propagation and inverse theory. To reduce the level of cognitive opacity associated with mathematical or programming knowledge, several computer modelling systems have already been developed (Neves & Teodoro, 2010). Among such systems, Modellus is particularly well suited to achieve this goal because it is a domain general environment for explorative and expressive modelling with the following main advantages: 1) an easy and intuitive creation of mathematical models using just standard mathematical notation; 2) the simultaneous exploration of images, tables, graphs and object animations; 3) the attribution of mathematical properties expressed in the models to animated objects; and finally 4) the computation and display of mathematical quantities obtained from the analysis of images and graphs. Here we describe virtual simulations and educational exercises which enable students an easy grasp of the fundamental of seismic tomography. The simulations make the lecture more interactive and allow students the possibility to overcome their lack of advanced mathematical or programming knowledge and focus on the learning of seismological concepts and processes taking advantage of basic scientific computation methods and tools.

Dedicated Programming Language for Small Distributed Control Divices

DEFF Research Database (Denmark)

Madsen, Per Printz; Borch, Ole

2007-01-01

. This paper describes a new, flexible and simple language for programming distributed control tasks. The compiler for this language generates a target code that is very easy to interpret. A interpreter, that can be easy ported to different hardwares, is described. The new language is simple and easy to learn...... become a reality if each of these controlling computers can be configured to perform a cooperative task. This again requires the necessary communicating facilities. In other words this requires that all these simple and distributed computers can be programmed in a simple and hardware independent way...

Adolescents' Chunking of Computer Programs.

Science.gov (United States)

Magliaro, Susan; Burton, John K.

To investigate what children learn during computer programming instruction, students attending a summer computer camp were asked to recall either single lines or chunks of computer programs from either coherent or scrambled programs. The 16 subjects, ages 12 to 17, were divided into three instructional groups: (1) beginners, who were taught to…

Gender and stereotypes in motivation to study computer programming for careers in multimedia

Science.gov (United States)

Doubé, Wendy; Lang, Catherine

2012-03-01

A multimedia university programme with relatively equal numbers of male and female students in elective programming subjects provided a rare opportunity to investigate female motivation to study and pursue computer programming in a career. The MSLQ was used to survey 85 participants. In common with research into deterrence of females from STEM domains, females displayed significantly lower self-efficacy and expectancy for success. In contrast to research into deterrence of females from STEM domains, both genders placed similar high values on computer programming and shared high extrinsic and intrinsic goal orientation. The authors propose that the stereotype associated with a creative multimedia career could attract female participation in computer programming whereas the stereotype associated with computer science could be a deterrent.

An easy-to-use diagnostic system development shell

Science.gov (United States)

Tsai, L. C.; Ross, J. B.; Han, C. Y.; Wee, W. G.

1987-01-01

The Diagnostic System Development Shell (DSDS), an expert system development shell for diagnostic systems, is described. The major objective of building the DSDS is to create a very easy to use and friendly environment for knowledge engineers and end-users. The DSDS is written in OPS5 and CommonLisp. It runs on a VAX/VMS system. A set of domain independent, generalized rules is built in the DSDS, so the users need not be concerned about building the rules. The facts are explicitly represented in a unified format. A powerful check facility which helps the user to check the errors in the created knowledge bases is provided. A judgement facility and other useful facilities are also available. A diagnostic system based on the DSDS system is question driven and can call or be called by other knowledge based systems written in OPS5 and CommonLisp. A prototype diagnostic system for diagnosing a Philips constant potential X-ray system has been built using the DSDS.

Teaching ocean wave forecasting using computer-generated visualization and animation—Part 1: sea forecasting

Science.gov (United States)

Whitford, Dennis J.

2002-05-01

Ocean waves are the most recognized phenomena in oceanography. Unfortunately, undergraduate study of ocean wave dynamics and forecasting involves mathematics and physics and therefore can pose difficulties with some students because of the subject's interrelated dependence on time and space. Verbal descriptions and two-dimensional illustrations are often insufficient for student comprehension. Computer-generated visualization and animation offer a visually intuitive and pedagogically sound medium to present geoscience, yet there are very few oceanographic examples. A two-part article series is offered to explain ocean wave forecasting using computer-generated visualization and animation. This paper, Part 1, addresses forecasting of sea wave conditions and serves as the basis for the more difficult topic of swell wave forecasting addressed in Part 2. Computer-aided visualization and animation, accompanied by oral explanation, are a welcome pedagogical supplement to more traditional methods of instruction. In this article, several MATLAB ® software programs have been written to visualize and animate development and comparison of wave spectra, wave interference, and forecasting of sea conditions. These programs also set the stage for the more advanced and difficult animation topics in Part 2. The programs are user-friendly, interactive, easy to modify, and developed as instructional tools. By using these software programs, teachers can enhance their instruction of these topics with colorful visualizations and animation without requiring an extensive background in computer programming.

The psychology of computer programming

CERN Document Server

Weinberg, Gerald Marvin

1998-01-01

This landmark 1971 classic is reprinted with a new preface, chapter-by-chapter commentary, and straight-from-the-heart observations on topics that affect the professional life of programmers. Long regarded as one of the first books to pioneer a people-oriented approach to computing, The Psychology of Computer Programming endures as a penetrating analysis of the intelligence, skill, teamwork, and problem-solving power of the computer programmer. Finding the chapters strikingly relevant to today's issues in programming, Gerald M. Weinberg adds new insights and highlights the similarities and differences between now and then. Using a conversational style that invites the reader to join him, Weinberg reunites with some of his most insightful writings on the human side of software engineering. Topics include egoless programming, intelligence, psychological measurement, personality factors, motivation, training, social problems on large projects, problem-solving ability, programming language design, team formati...

Using soft-X-ray energy spectrum to measure electronic temperature Te and primary research with computer data processing

International Nuclear Information System (INIS)

Wang Jingyao; Zhang Guangyang

1993-01-01

The authors reported the application of SCORPIO--2000 Computer detecting system on a nuclear fusion equipment, to measure the energy spectrum of soft X-ray from which the plasma electronic temperature was calculated. The authors processed systematically the data of the energy area of 1-4 Kev soft X-ray. The program edited was mostly made in FORTRAN, but only one SUBSB was made in assembly language. The program worked normally with convincing operation and easy correction of the data. The result obtained from calculation is the same as what was expected and the diagram obtained is the same as the expected one

Motofit - integrating neutron reflectometry acquisition, reduction and analysis into one, easy to use, package

International Nuclear Information System (INIS)

Nelson, Andrew

2010-01-01

The efficient use of complex neutron scattering instruments is often hindered by the complex nature of their operating software. This complexity exists at each experimental step: data acquisition, reduction and analysis, with each step being as important as the previous. For example, whilst command line interfaces are powerful at automated acquisition they often reduce accessibility by novice users and sometimes reduce the efficiency for advanced users. One solution to this is the development of a graphical user interface which allows the user to operate the instrument by a simple and intuitive 'push button' approach. This approach was taken by the Motofit software package for analysis of multiple contrast reflectometry data. Here we describe the extension of this package to cover the data acquisition and reduction steps for the Platypus time-of-flight neutron reflectometer. Consequently, the complete operation of an instrument is integrated into a single, easy to use, program, leading to efficient instrument usage.

Computer-controlled back scattering and sputtering-experiment using a heavy-ion-accelerator

International Nuclear Information System (INIS)

Becker, H.; Birnbaum, M.; Degenhardt, K.H.; Mertens, P.; Tschammer, V.

1978-12-01

Control and data acquisition of a PDP 11/40 computer and CAMAC instrumentation are reported for an experiment that has been developed to measure sputtering in yields and energy losses for heavy 100 - 300 keV ions in thin metal foils. Besides a quadrupole mass filter or a bending magnet, a multichannel analyser is coupled to the computer, so that also pulse height analysis can be performed under computer control. CAMAC instrumentation and measuring programs are built in a modular form to enable an easy application to other experimental problems. (orig.) 891 KBE/orig. 892 BRE

Brine: a computer program to compute brine migration adjacent to a nuclear waste canister in a salt repository

International Nuclear Information System (INIS)

Duckworth, G.D.; Fuller, M.E.

1980-01-01

This report presents a mathematical model used to predict brine migration toward a nuclear waste canister in a bedded salt repository. The mathematical model is implemented in a computer program called BRINE. The program is written in FORTRAN and executes in the batch mode on a CDC 7600. A description of the program input requirements and output available is included. Samples of input and output are given

Easy GROMACS: A Graphical User Interface for GROMACS Molecular Dynamics Simulation Package

Science.gov (United States)

Dizkirici, Ayten; Tekpinar, Mustafa

2015-03-01

GROMACS is a widely used molecular dynamics simulation package. Since it is a command driven program, it is difficult to use this program for molecular biologists, biochemists, new graduate students and undergraduate researchers who are interested in molecular dynamics simulations. To alleviate the problem for those researchers, we wrote a graphical user interface that simplifies protein preparation for a classical molecular dynamics simulation. Our program can work with various GROMACS versions and it can perform essential analyses of GROMACS trajectories as well as protein preparation. We named our open source program `Easy GROMACS'. Easy GROMACS can give researchers more time for scientific research instead of dealing with technical intricacies.

Construction of an easy-to-use CRISPR-Cas9 system by patching a newly designed EXIT circuit.

Science.gov (United States)

Tang, Qiang; Lou, Chunbo; Liu, Shuang-Jiang

2017-01-01

Plasmid-borne genetic editing tools, including the widely used CRISPR-Cas9 system, have greatly facilitated bacterial programming to obtain novel functionalities. However, the lack of effective post-editing plasmid elimination methods impedes follow-up genetic manipulation or application. Conventional strategies including exposure to physical and chemical treatments, or exploiting temperature-sensitive replication origins have several drawbacks (e.g., they are limited for efficiency and are time-consuming). Therefore, the demand is apparent for easy and rapid elimination of the tool plasmids from their bacterial hosts after genetic manipulation. To bridge this gap, we designed a novel EXIT circuit with the homing endonuclease, which can be exploited for rapid and efficient elimination of various plasmids with diverse replication origins. As a proof of concept, we validated the EXIT circuit in Escherichia coli by harnessing homing endonuclease I- Sce I and its cleavage site. When integrated into multiple plasmids with different origins, the EXIT circuit allowed them to be eliminated from the host cells, simultaneously. By combining the widely used plasmid-borne CRISPR-Cas9 system and the EXIT circuit, we constructed an easy-to-use CRISPR-Cas9 system that eliminated the Cas9- and the single-guide RNA (sgRNA)-encoding plasmids in one-step. Within 3 days, we successfully constructed an atrazine-degrading E. coli strain, thus further demonstrating the advantage of this new CRISPR-Cas9 system for bacterial genome editing. Our novel EXIT circuit, which exploits the homing endonuclease I- Sce I, enables plasmid(s) with different replication origins to be eliminated from their host cells rapidly and efficiently. We also developed an easy-to-use CRISPR-Cas9 system with the EXIT circuit, and this new system can be widely applied to bacterial genome editing.

Preschool Cookbook of Computer Programming Topics

Science.gov (United States)

Morgado, Leonel; Cruz, Maria; Kahn, Ken

2010-01-01

A common problem in computer programming use for education in general, not simply as a technical skill, is that children and teachers find themselves constrained by what is possible through limited expertise in computer programming techniques. This is particularly noticeable at the preliterate level, where constructs tend to be limited to…

NASA's computer science research program

Science.gov (United States)

Larsen, R. L.

1983-01-01

Following a major assessment of NASA's computing technology needs, a new program of computer science research has been initiated by the Agency. The program includes work in concurrent processing, management of large scale scientific databases, software engineering, reliable computing, and artificial intelligence. The program is driven by applications requirements in computational fluid dynamics, image processing, sensor data management, real-time mission control and autonomous systems. It consists of university research, in-house NASA research, and NASA's Research Institute for Advanced Computer Science (RIACS) and Institute for Computer Applications in Science and Engineering (ICASE). The overall goal is to provide the technical foundation within NASA to exploit advancing computing technology in aerospace applications.

Analysis of computer programming languages

International Nuclear Information System (INIS)

Risset, Claude Alain

1967-01-01

This research thesis aims at trying to identify some methods of syntax analysis which can be used for computer programming languages while putting aside computer devices which influence the choice of the programming language and methods of analysis and compilation. In a first part, the author proposes attempts of formalization of Chomsky grammar languages. In a second part, he studies analytical grammars, and then studies a compiler or analytic grammar for the Fortran language

Computer Programming Languages for Health Care

Science.gov (United States)

O'Neill, Joseph T.

1979-01-01

This paper advocates the use of standard high level programming languages for medical computing. It recommends that U.S. Government agencies having health care missions implement coordinated policies that encourage the use of existing standard languages and the development of new ones, thereby enabling them and the medical computing community at large to share state-of-the-art application programs. Examples are based on a model that characterizes language and language translator influence upon the specification, development, test, evaluation, and transfer of application programs.

Permitted decompilation of a computer program in order to protect the general interest

Directory of Open Access Journals (Sweden)

Radovanović Sanja M.

2015-01-01

Full Text Available Computer program is an intellectual creation protected by copyright. However, unlike other items with equivalent legal protection, a computer program has a strong technical functionality, which is, in nowadays' society, an indispensable factor in everyday business activities, exchange of information, entertainment or achieving other similar purposes. Precisely because of this feature, computer program can rarely be seen in isolation from the hardware and software environment. In other words, the functionality of a computer program reaches its full scope only in interaction with other computer program or device. Bearing in mind the fact that this intellectual creation is in the focus of technological, and thus social, development, legislators are trying to provide a legal framework in which these interactions take place unhindered. In fact, considering that each aspect of the use of a computer program presents the exclusive right of the author, relying on his or her consent to undertake certain perpetration which would provide the necessary connectivity of the various components, could put in risk further technological development. Therefore, the lawmakers provide that, in certain cases and under certain conditions, the author's exclusive right could be restricted or excluded. This paper aims to analyze a normative contribution in achieving, technical and technological needed, and therefore, in terms of general interest justified, interactions.

FastChem: A computer program for efficient complex chemical equilibrium calculations in the neutral/ionized gas phase with applications to stellar and planetary atmospheres

Science.gov (United States)

Stock, Joachim W.; Kitzmann, Daniel; Patzer, A. Beate C.; Sedlmayr, Erwin

2018-06-01

For the calculation of complex neutral/ionized gas phase chemical equilibria, we present a semi-analytical versatile and efficient computer program, called FastChem. The applied method is based on the solution of a system of coupled nonlinear (and linear) algebraic equations, namely the law of mass action and the element conservation equations including charge balance, in many variables. Specifically, the system of equations is decomposed into a set of coupled nonlinear equations in one variable each, which are solved analytically whenever feasible to reduce computation time. Notably, the electron density is determined by using the method of Nelder and Mead at low temperatures. The program is written in object-oriented C++ which makes it easy to couple the code with other programs, although a stand-alone version is provided. FastChem can be used in parallel or sequentially and is available under the GNU General Public License version 3 at https://github.com/exoclime/FastChem together with several sample applications. The code has been successfully validated against previous studies and its convergence behavior has been tested even for extreme physical parameter ranges down to 100 K and up to 1000 bar. FastChem converges stable and robust in even most demanding chemical situations, which posed sometimes extreme challenges for previous algorithms.

Computer technology and computer programming research and strategies

CERN Document Server

Antonakos, James L

2011-01-01

Covering a broad range of new topics in computer technology and programming, this volume discusses encryption techniques, SQL generation, Web 2.0 technologies, and visual sensor networks. It also examines reconfigurable computing, video streaming, animation techniques, and more. Readers will learn about an educational tool and game to help students learn computer programming. The book also explores a new medical technology paradigm centered on wireless technology and cloud computing designed to overcome the problems of increasing health technology costs.

Pteros: fast and easy to use open-source C++ library for molecular analysis.

Science.gov (United States)

Yesylevskyy, Semen O

2012-07-15

An open-source Pteros library for molecular modeling and analysis of molecular dynamics trajectories for C++ programming language is introduced. Pteros provides a number of routine analysis operations ranging from reading and writing trajectory files and geometry transformations to structural alignment and computation of nonbonded interaction energies. The library features asynchronous trajectory reading and parallel execution of several analysis routines, which greatly simplifies development of computationally intensive trajectory analysis algorithms. Pteros programming interface is very simple and intuitive while the source code is well documented and easily extendible. Pteros is available for free under open-source Artistic License from http://sourceforge.net/projects/pteros/. Copyright © 2012 Wiley Periodicals, Inc.

Mixed language programming

International Nuclear Information System (INIS)

Burow, Burkhard D.

1996-01-01

Computing in the next millennium will be using software from this millennium. Programming languages evolve and new ones continue to be created. The use of legacy code demonstrates why some present and future applications may span programming languages. Even a completely new application may mix programming languages, if it allows its components to be more conveniently expressed. Given the need, mixed language programming should be easy and robust. By resolving a variety of difficulties, the well established cfortran.h package provides, the desired convenient interface across the C and Fortran programming languages, as demonstrated using CERN's Book. (author)

STRATEGI PEMASARAN PAKET WISATA DI BALI EASY HOLIDAY DENPASAR BALI

Directory of Open Access Journals (Sweden)

Erick Kevin Perangin-Angin

2017-07-01

Full Text Available This Journal aimed to know the strengths and weaknesses of the internal environment and opportunities as well as threats from the external environment and create strategies and marketing programs that can be applied in the Bali Easy Holiday. The technique data collection using observation, interview, questionnaire, the study of literature and documentation study. Sampling techniques using a purposive sampling. Data analysis techniques using qualitative descriptive analysis and Likert scale analysis. The results of this research are obtaining indicators of strengths and weaknesses of internal environment and the opportunities and threats of weaknesses in Bali Easy Holiday. Bali Easy Holiday gains 16 indicators of strengths and 4 indicators of weaknesses in Bali Easy Holiday. Bali Easy Holiday gains 9 indicators of opportunities 5 indicators of threats in Bali Easy Holiday. Marketing strategies can be applied to Bali Easy Holiday, namely : the creation of strategy and product development, market development strategies, promotion strategy, a strategy of improved human resources, the strategy of market penetration strategies, improvement of the quality of products and services and pricing strategies. This research has some advice for Bali Easy Holiday is to increase the intensity of promotion, provide ease reservations and payments to consumers, renew tour packages, provide affordable rates to customers and formed a marketing division.

Application of computers in a radiological survey program

International Nuclear Information System (INIS)

Berven, B.A.; Blair, M.S.; Doane, R.W.; Little, C.A.; Perdue, P.T.

1984-01-01

Computers have become increasingly important in data analysis and data management as well as assisting in report preparation in the Oak Ridge National Laboratory (ORNL) Radiological Survey Activities (RASA) Program. The primary function of the RASA program is to collect, analyze, report, and manage data collected to characterize the radiological condition of potentially contaminated sites identified in the Department of Energy's (DOE) remedial action programs. Three different computer systems are routinely utilized in ORNL/RASA operations. Two of these systems are employed in specific functions. A Nuclear Data (ND) 682 is used to perform isotopic analysis of gamma spectroscopic data generated by high-purity germanium detectors for air, water and soil samples. The ND682 employs a 16,000-channel analyzer that is routinely used with four germanium spectrometers. Word processing and data management are accomplished using the INtext system implemented on a DEC PDP-11 computer. A group of personal computers are used to perform a diverse number of functions. These computer systems are Commodore Business Machines (CBM) Model 8032 with a dual floppy disk storage medium and line printers (with optional X-Y plotters). The CBM's are utilized for: (1) data analysis -- raw data from radiation detection instrumentation are stored and manipulated with customized computer programs; (2) data reduction -- raw data are converted into report-ready tables using customized programs; (3) data management -- radionuclide data on each air, water and soil sample are stored on diskettes along with location of archived samples; and (4) program management -- site surveys and report status are tracked by computer files as well as program budget information to provide contemporary information of program status

CrystalCMP: an easy-to-use tool for fast comparison of molecular packing

Czech Academy of Sciences Publication Activity Database

Rohlíček, Jan; Skořepová, E.; Babor, M.; Čejka, J.

2016-01-01

Roč. 49, č. 6 (2016), s. 2172-2183 ISSN 0021-8898 R&D Projects: GA ČR GA16-10035S Institutional support: RVO:68378271 Keywords : comparison * similarity packing * crystal structure * computer programs Subject RIV: JC - Computer Hardware ; Software Impact factor: 3.720, year: 2014

USERDA computer program summaries. Numbers 177--239

International Nuclear Information System (INIS)

1975-10-01

Since 1960 the Argonne Code Center has served as a U. S. Atomic Energy Commission information center for computer programs developed and used primarily for the solution of problems in nuclear physics, reactor design, reactor engineering and operation. The Center, through a network of registered installations, collects, validates, maintains, and distributes a library of these computer programs and publishes a compilation of abstracts describing them. In 1972 the scope of the Center's activities was officially expanded to include computer programs developed in all of the U. S. Atomic Energy Commission program areas and the compilation and publication of this report. The Computer Program Summary report contains summaries of computer programs at the specification stage, under development, being checked out, in use, or available at ERDA offices, laboratories, and contractor installations. Programs are divided into the following categories: cross section and resonance integral calculations; spectrum calculations, generation of group constants, lattice and cell problems; static design studies; depletion, fuel management, cost analysis, and reactor economics; space-independent kinetics; space--time kinetics, coupled neutronics--hydrodynamics--thermodynamics and excursion simulations; radiological safety, hazard and accident analysis; heat transfer and fluid flow; deformation and stress distribution computations, structural analysis and engineering design studies; gamma heating and shield design programs; reactor systems analysis; data preparation; data management; subsidiary calculations; experimental data processing; general mathematical and computing system routines; materials; environmental and earth sciences; space sciences; electronics and engineering equipment; chemistry; particle accelerators and high-voltage machines; physics; controlled thermonuclear research; biology and medicine; and data

Program MASTERCALC: an interactive computer program for radioanalytical computations. Description and operating instructions

International Nuclear Information System (INIS)

Goode, W.

1980-10-01

MASTERCALC is a computer program written to support radioanalytical computations in the Los Alamos Scientific Laboratory (LASL) Environmental Surveillance Group. Included in the program are routines for gross alpha and beta, 3 H, gross gamma, 90 Sr and alpha spectroscopic determinations. A description of MASTERCALC is presented and its source listing is included. Operating instructions and example computing sessions are given for each type of analysis

Computer programs simplify optical system analysis

Science.gov (United States)

1965-01-01

The optical ray-trace computer program performs geometrical ray tracing. The energy-trace program calculates the relative monochromatic flux density on a specific target area. This program uses the ray-trace program as a subroutine to generate a representation of the optical system.

Ezhil: A Tamil Programming Language

OpenAIRE

Annamalai, Muthiah

2009-01-01

Ezhil is a Tamil language based interpreted procedural programming language. Tamil keywords and grammar are chosen to make the native Tamil speaker write programs in the Ezhil system. Ezhil allows easy representation of computer program closer to the Tamil language logical constructs equivalent to the conditional, branch and loop statements in modern English based programming languages. Ezhil is a compact programming language aimed towards Tamil speaking novice computer users. Grammar for Ezh...

ICASE Computer Science Program

Science.gov (United States)

1985-01-01

The Institute for Computer Applications in Science and Engineering computer science program is discussed in outline form. Information is given on such topics as problem decomposition, algorithm development, programming languages, and parallel architectures.

Using computer program RELAP5/MOD2 on microcomputers

International Nuclear Information System (INIS)

Grgic, D.; Bajs, T; Cavlina, N.; Debrecin, N.

1990-01-01

Our work on installation of RELAP5/MOD2 code on IBM4341, mVAX 11, MGT-386 and COMPAQ-386/20e computers is described. Main characteristics of RELAP5/MOD2 structure programming style and differences between FORTRAN VS, VAX-11 FORTRAN and NDP FORTRAN 386 are presented. We discussed basic philosophy used in modification and testing and test results. (author)

Programming Unconventional Computers: Dynamics, Development, Self-Reference

Directory of Open Access Journals (Sweden)

Susan Stepney

2012-10-01

Full Text Available Classical computing has well-established formalisms for specifying, refining, composing, proving, and otherwise reasoning about computations. These formalisms have matured over the past 70 years or so. Unconventional Computing includes the use of novel kinds of substrates–from black holes and quantum effects, through to chemicals, biomolecules, even slime moulds–to perform computations that do not conform to the classical model. Although many of these unconventional substrates can be coerced into performing classical computation, this is not how they “naturally” compute. Our ability to exploit unconventional computing is partly hampered by a lack of corresponding programming formalisms: we need models for building, composing, and reasoning about programs that execute in these substrates. What might, say, a slime mould programming language look like? Here I outline some of the issues and properties of these unconventional substrates that need to be addressed to find “natural” approaches to programming them. Important concepts include embodied real values, processes and dynamical systems, generative systems and their meta-dynamics, and embodied self-reference.

Development of a fast running accident analysis computer program for use in a simulator

International Nuclear Information System (INIS)

Cacciabue, P.C.

1985-01-01

This paper describes how a reactor safety nuclear computer program can be modified and improved with the aim of reaching a very fast running tool to be used as a physical model in a plant simulator, without penalizing the accuracy of results. It also discusses some ideas on how the physical theoretical model can be combined to a driving statistical tool for the build up of the entire package of software to be implemented in the simulator for risk and reliability analysis. The approach to the problem, although applied to a specific computer program, can be considered quite general if an already existing and well tested code is being used for the purpose. The computer program considered is ALMOD, originally developed for the analysis of the thermohydraulic and neutronic behaviour of the reactor core, primary circuit and steam generator during operational and special transients. (author)

System safety and reliability using object-oriented programming techniques

International Nuclear Information System (INIS)

Patterson-Hine, F.A.; Koen, B.V.

1987-01-01

Direct evaluation fault tree codes have been written in recursive, list-processing computer languages such as PL/1 (PATREC-I) and LISP (PATREC-L). The pattern-matching strategy implemented in these codes has been used extensively in France to evaluate system reliability. Recent reviews of the risk management process suggest that a data base containing plant-specific information be integrated with a package of codes used for probabilistic risk assessment (PRA) to alleviate some of the difficulties that make a PRA so costly and time-intensive. A new programming paradigm, object-oriented programming, is uniquely suited for the development of such a software system. A knowledge base and fault tree evaluation algorithm, based on previous experience with PATREC-L, have been implemented using object-oriented techniques, resulting in a reliability assessment environment that is easy to develop, modify, and extend

Computer Networking Laboratory for Undergraduate Computer Technology Program

National Research Council Canada - National Science Library

Naghedolfeizi, Masoud

2000-01-01

...) To improve the quality of education in the existing courses related to computer networks and data communications as well as other computer science courses such programming languages and computer...

A Computer-Based Program to Teach Braille Reading to Sighted Individuals

Science.gov (United States)

Scheithauer, Mindy C.; Tiger, Jeffrey H.

2012-01-01

Instructors of the visually impaired need efficient braille-training methods. This study conducted a preliminary evaluation of a computer-based program intended to teach the relation between braille characters and English letters using a matching-to-sample format with 4 sighted college students. Each participant mastered matching visual depictions…

An investigation of factors related to self-efficacy for Java programming among computer science education students

Directory of Open Access Journals (Sweden)

Desmond Wesley Govender

2015-11-01

Full Text Available Students usually perceived computer programming courses as one of the most difficult courses since learning to program is perceived as a difficult task. Quite often students’ negative perceptions on computer programming results in poor results and high drop-out rates. The purpose of this study is to examine the impact of factors that affect computer science education students’ Java programming self-efficacy and the relationship between Java programming self-efficacy and students’ age and gender. A questionnaire was used to gather data. A scale with thirty-two items assessing Java programming self-efficacy was adapted from Askar and Davenport’s (2009 computer programming self-efficacy scale. A total of twenty students from a Computer Science Education Discipline participated in this study. Collected data were analysed using SPSS version 22.0. Descriptive statistics, reliability test, mean, standard deviation, and rotated component matrix were utilized to analyze the resulting data. Results indicated that there is not much difference between males (45% and females (55% Java programming self-efficacy. Furthermore, the results also indicated that programming skills and Java constructs have higher influence on the self-efficacy for Java programming among computer science education students followed by non-complexity, time consciousness, ability to recode for better understanding and self-motivation.

Application of computers in a Radiological Survey Program

International Nuclear Information System (INIS)

Berven, B.A.; Blair, M.S.; Doane, R.W.; Little, C.A.; Perdue, P.T.

1984-01-01

A brief description of some of the applications of computers in a radiological survey program is presented. It has been our experience that computers and computer software have allowed our staff personnel to more productively use their time by using computers to perform the mechanical acquisition, analyses, and storage of data. It is hoped that other organizations may similarly profit from this experience. This effort will ultimately minimize errors and reduce program costs

DOE pushes for useful quantum computing

Science.gov (United States)

Cho, Adrian

2018-01-01

The U.S. Department of Energy (DOE) is joining the quest to develop quantum computers, devices that would exploit quantum mechanics to crack problems that overwhelm conventional computers. The initiative comes as Google and other companies race to build a quantum computer that can demonstrate "quantum supremacy" by beating classical computers on a test problem. But reaching that milestone will not mean practical uses are at hand, and the new $40 million DOE effort is intended to spur the development of useful quantum computing algorithms for its work in chemistry, materials science, nuclear physics, and particle physics. With the resources at its 17 national laboratories, DOE could play a key role in developing the machines, researchers say, although finding problems with which quantum computers can help isn't so easy.

Use of a fast incremental plotter combined with a mini-computer programmed in BASIC for the routine analysis of gammagraphic data

International Nuclear Information System (INIS)

Vigne, J.P.; Aristote, A.

The system described is built around a Hewlett-Packard mini-computer (H.P. 2116 B) of 24 16-bit words, with peripherals consisting of a teleprinter, a fast reader, a fast perforator, an IBM compatible band unit, a cathode-ray tube with memory, a Benson incremental plotter and two high-speed HP analogue digital convertors. Data processing is carried out exclusively in BASIC, a conversational language very easy to use, written in common English, which can be modified at a moment's notice to meet special requirements. It is considered that this type of system, which certain constructors are beginning to offer in the form of a ready-to-use apparatus micro-programmed in BASIC, is destined to take the place of fixed systems which are hardly less expensive. It enables the laboratory which acquires such an instrument to perform all kinds of scientific calculations and as the case may be to manage physiological transducers or medical records [fr

Computational Performance Analysis of Nonlinear Dynamic Systems using Semi-infinite Programming

Directory of Open Access Journals (Sweden)

Tor A. Johansen

2001-01-01

Full Text Available For nonlinear systems that satisfy certain regularity conditions it is shown that upper and lower bounds on the performance (cost function can be computed using linear or quadratic programming. The performance conditions derived from Hamilton-Jacobi inequalities are formulated as linear inequalities defined pointwise by discretizing the state-space when assuming a linearly parameterized class of functions representing the candidate performance bounds. Uncertainty with respect to some system parameters can be incorporated by also gridding the parameter set. In addition to performance analysis, the method can also be used to compute Lyapunov functions that guarantees uniform exponential stability.

Primary School Pupils' Attitudes toward Learning Programming through Visual Interactive Environments

Science.gov (United States)

Asad, Khaled; Tibi, Moanis; Raiyn, Jamal

2016-01-01

New generations are using and playing with mobile and computer applications extensively. These applications are the outcomes of programming work that involves skills, such as computational and algorithmic thinking. Learning programming is not easy for students children. In recent years, academic institutions like the Massachusetts Institute of…

AV Programs for Computer Know-How.

Science.gov (United States)

Mandell, Phyllis Levy

1985-01-01

Lists 44 audiovisual programs (most released between 1983 and 1984) grouped in seven categories: computers in society, introduction to computers, computer operations, languages and programing, computer graphics, robotics, computer careers. Excerpts from "School Library Journal" reviews, price, and intended grade level are included. Names…

A non-linear programming approach to the computer-aided design of regulators using a linear-quadratic formulation

Science.gov (United States)

Fleming, P.

1985-01-01

A design technique is proposed for linear regulators in which a feedback controller of fixed structure is chosen to minimize an integral quadratic objective function subject to the satisfaction of integral quadratic constraint functions. Application of a non-linear programming algorithm to this mathematically tractable formulation results in an efficient and useful computer-aided design tool. Particular attention is paid to computational efficiency and various recommendations are made. Two design examples illustrate the flexibility of the approach and highlight the special insight afforded to the designer.

Easy robot programming for beginners and kids using augmented reality environments

Science.gov (United States)

Sakamoto, Kunio; Nishiguchi, Masahiro

2010-11-01

The authors have developed the mobile robot which can be programmed by command and instruction cards. All you have to do is to arrange cards on a table and to shot the programming stage by a camera. Our card programming system recognizes instruction cards and translates icon commands into the motor driver program. This card programming environment also provides low-level structure programming.

Structured Design Language for Computer Programs

Science.gov (United States)

Pace, Walter H., Jr.

1986-01-01

Box language used at all stages of program development. Developed to provide improved productivity in designing, coding, and maintaining computer programs. BOX system written in FORTRAN 77 for batch execution.

Quebec Trophoblastic Disease Registry: how to make an easy-to-use dynamic database.

Science.gov (United States)

Sauthier, Philippe; Breguet, Magali; Rozenholc, Alexandre; Sauthier, Michaël

2015-05-01

To create an easy-to-use dynamic database designed specifically for the Quebec Trophoblastic Disease Registry (RMTQ). It is now well established that much of the success in managing trophoblastic diseases comes from the development of national and regional reference centers. Computerized databases allow the optimal use of data stored in these centers. We have created an electronic data registration system by producing a database using FileMaker Pro 12. It uses 11 external tables associated with a unique identification number for each patient. Each table allows specific data to be recorded, incorporating demographics, diagnosis, automated staging, laboratory values, pathological diagnosis, and imaging parameters. From January 1, 2009, to December 31, 2013, we used our database to register 311 patients with 380 diseases and have seen a 39.2% increase in registrations each year between 2009 and 2012. This database allows the automatic generation of semilogarithmic curves, which take into account β-hCG values as a function of time, complete with graphic markers for applied treatments (chemotherapy, radiotherapy, or surgery). It generates a summary sheet for a synthetic vision in real time. We have created, at a low cost, an easy-to-use database specific to trophoblastic diseases that dynamically integrates staging and monitoring. We propose a 10-step procedure for a successful trophoblastic database. It improves patient care, research, and education on trophoblastic diseases in Quebec and leads to an opportunity for collaboration on a national Canadian registry.

ADAM: A computer program to simulate selective-breeding schemes for animals

DEFF Research Database (Denmark)

Pedersen, L D; Sørensen, A C; Henryon, M

2009-01-01

ADAM is a computer program that models selective breeding schemes for animals using stochastic simulation. The program simulates a population of animals and traces the genetic changes in the population under different selective breeding scenarios. It caters to different population structures......, genetic models, selection strategies, and mating designs. ADAM can be used to evaluate breeding schemes and generate genetic data to test statistical tools...

BIOSAY: a computer program to store and report bioassay data

International Nuclear Information System (INIS)

Williams, G.E.; Parlagreco, J.R.

1978-12-01

BIOSAY is a computer program designed to manipulate bioassay data. Using BIOSAY, the Dosimetry Group can generate a report suitable for an individual's dosimetry record. A second copy of this report may be mailed to the individual who provided the sample or the area health physicist for review. BIOSAY also contains a data sorting option which allows all the results for particular individuals, or groups of individuals with common attributes, to be separated from the data base. The computer code is written in a conversational tone with aids which make it usable by even casual users of the computer system

easyCBM Norms. 2014 Edition. Technical Report #1409

Science.gov (United States)

Saven, Jessica L.; Tindal, Gerald; Irvin, P. Shawn; Farley, Dan; Alonzo, Julie

2014-01-01

Previous norms for the easyCBM assessment system were computed using scores from all students who took each measure for every grade and benchmark season (fall, winter, and spring). During the 2013-­14 school year, new national norms were developed to more accurately (proportionately) represent reading and mathematics performance by two variables:…

Integer programming theory, applications, and computations

CERN Document Server

Taha, Hamdy A

1975-01-01

Integer Programming: Theory, Applications, and Computations provides information pertinent to the theory, applications, and computations of integer programming. This book presents the computational advantages of the various techniques of integer programming.Organized into eight chapters, this book begins with an overview of the general categorization of integer applications and explains the three fundamental techniques of integer programming. This text then explores the concept of implicit enumeration, which is general in a sense that it is applicable to any well-defined binary program. Other

Computational approaches to screen candidate ligands with anti- Parkinson's activity using R programming.

Science.gov (United States)

Jayadeepa, R M; Niveditha, M S

2012-01-01

It is estimated that by 2050 over 100 million people will be affected by the Parkinson's disease (PD). We propose various computational approaches to screen suitable candidate ligand with anti-Parkinson's activity from phytochemicals. Five different types of dopamine receptors have been identified in the brain, D1-D5. Dopamine receptor D3 was selected as the target receptor. The D3 receptor exists in areas of the brain outside the basal ganglia, such as the limbic system, and thus may play a role in the cognitive and emotional changes noted in Parkinson's disease. A ligand library of 100 molecules with anti-Parkinson's activity was collected from literature survey. Nature is the best combinatorial chemist and possibly has answers to all diseases of mankind. Failure of some synthetic drugs and its side effects have prompted many researches to go back to ancient healing methods which use herbal medicines to give relief. Hence, the candidate ligands with anti-Parkinson's were selected from herbal sources through literature survey. Lipinski rules were applied to screen the suitable molecules for the study, the resulting 88 molecules were energy minimized, and subjected to docking using Autodock Vina. The top eleven molecules were screened according to the docking score generated by Autodock Vina Commercial drug Ropinirole was computed similarly and was compared with the 11 phytochemicals score, the screened molecules were subjected to toxicity analysis and to verify toxic property of phytochemicals. R Programming was applied to remove the bias from the top eleven molecules. Using cluster analysis and Confusion Matrix two phytochemicals were computationally selected namely Rosmarinic acid and Gingkolide A for further studies on the disease Parkinson's.

Easy, Collaborative and Engaging--The Use of Cloud Computing in the Design of Management Classrooms

Science.gov (United States)

Schneckenberg, Dirk

2014-01-01

Background: Cloud computing has recently received interest in information systems research and practice as a new way to organise information with the help of an increasingly ubiquitous computer infrastructure. However, the use of cloud computing in higher education institutions and business schools, as well as its potential to create novel…

Contributions to computational stereology and parallel programming

DEFF Research Database (Denmark)

Rasmusson, Allan

rotator, even without the need for isotropic sections. To meet the need for computational power to perform image restoration of virtual tissue sections, parallel programming on GPUs has also been part of the project. This has lead to a significant change in paradigm for a previously developed surgical...

Technical Manual: easyCBM. Technical Report #1408

Science.gov (United States)

Anderson, Daniel; Alonzo, Julie; Tindal, Gerald; Farley, Dan; Irvin, P. Shawn; Lai, Cheng-Fei; Saven, Jessica L.; Wray, Kraig A.

2014-01-01

Since the easyCBM© learning system was first published in 2006, over $8 million of federal funding (both from the Office of Special Education Programs and more recently from the Institute of Education Sciences) has been used to develop, study, and refine the assessments available on the system. This Technical Manual summarizes the ongoing research…

Calibrating EASY-Care independence scale to improve accuracy

Science.gov (United States)

Jotheeswaran, A. T.; Dias, Amit; Philp, Ian; Patel, Vikram; Prince, Martin

2016-01-01

Background there is currently limited support for the reliability and validity of the EASY-Care independence scale, with little work carried out in low- or middle-income countries. Therefore, we assessed the internal construct validity and hierarchical and classical scaling properties among frail dependent older people in the community. Objective we assessed the internal construct validity and hierarchical and classical scaling properties among frail dependent older people in the community. Methods three primary care physicians administered EASY-Care comprehensive geriatric assessment for 150 frail and/or dependent older people in the primary care setting. A Mokken model was applied to investigate hierarchical scaling properties of EASY-Care independence scale, and internal consistency (Cronbach's alpha) of the scale was also examined. Results we found that EASY-Care independence scale is highly internally consistent and is a strong hierarchical scale, hence providing strong evidence for unidimensionality. However, two items in the scale (unable to use telephone and manage finances) had much lower item Loevinger H coefficients than others. Exclusion of these two items improved the overall internal consistency of the scale. Conclusions the strong performance of the EASY-Care independence scale among community-dwelling frail older people is encouraging. This study confirms that EASY-Care independence scale is highly internally consistent and a strong hierarchical scale. PMID:27496925

A computer program to evaluate optical systems

Science.gov (United States)

Innes, D.

1972-01-01

A computer program is used to evaluate a 25.4 cm X-ray telescope at a field angle of 20 minutes of arc by geometrical analysis. The object is regarded as a point source of electromagnetic radiation, and the optical surfaces are treated as boundary conditions in the solution of the electromagnetic wave propagation equation. The electric field distribution is then determined in the region of the image and the intensity distribution inferred. A comparison of wave analysis results and photographs taken through the telescope shows excellent agreement.

Computer code qualification program for the Advanced CANDU Reactor

International Nuclear Information System (INIS)

Popov, N.K.; Wren, D.J.; Snell, V.G.; White, A.J.; Boczar, P.G.

2003-01-01

Atomic Energy of Canada Ltd (AECL) has developed and implemented a Software Quality Assurance program (SQA) to ensure that its analytical, scientific and design computer codes meet the required standards for software used in safety analyses. This paper provides an overview of the computer programs used in Advanced CANDU Reactor (ACR) safety analysis, and assessment of their applicability in the safety analyses of the ACR design. An outline of the incremental validation program, and an overview of the experimental program in support of the code validation are also presented. An outline of the SQA program used to qualify these computer codes is also briefly presented. To provide context to the differences in the SQA with respect to current CANDUs, the paper also provides an overview of the ACR design features that have an impact on the computer code qualification. (author)

What do reversible programs compute?

DEFF Research Database (Denmark)

Axelsen, Holger Bock; Glück, Robert

2011-01-01

Reversible computing is the study of computation models that exhibit both forward and backward determinism. Understanding the fundamental properties of such models is not only relevant for reversible programming, but has also been found important in other fields, e.g., bidirectional model...... transformation, program transformations such as inversion, and general static prediction of program properties. Historically, work on reversible computing has focussed on reversible simulations of irreversible computations. Here, we take the viewpoint that the property of reversibility itself should...... are not strictly classically universal, but that they support another notion of universality; we call this RTM-universality. Thus, even though the RTMs are sub-universal in the classical sense, they are powerful enough as to include a self-interpreter. Lifting this to other computation models, we propose r...

THE TRAVELLING SALESMAN PROBLEM IN THE ENGINEERING EDUCATION PROGRAMMING CURRICULUM

OpenAIRE

Yevgeny Gayev; Vadim Kalmikov

2017-01-01

Objective: To make students familiar with the famous Traveling Salesman Problem (TSP) and suggest the latter to become a common exercise in engineering programming curriculum provided the students master computer science in the easy programming environment MATLAB. Methods: easy programming in MATLAB makes true such modern educational approach as “discovery based” methodology. Results: a MATLAB TSP-program oriented to Ukrainian map is suggested that allows to pictorially demonstrate the proces...

Development of a computer program for the cost analysis of spent fuel management

International Nuclear Information System (INIS)

Choi, Heui Joo; Lee, Jong Youl; Choi, Jong Won; Cha, Jeong Hun; Whang, Joo Ho

2009-01-01

So far, a substantial amount of spent fuels have been generated from the PWR and CANDU reactors. They are being temporarily stored at the nuclear power plant sites. It is expected that the temporary storage facility will be full of spent fuels by around 2016. The government plans to solve the problem by constructing an interim storage facility soon. The radioactive management act was enacted in 2008 to manage the spent fuels safety in Korea. According to the act, the radioactive waste management fund which will be used for the transportation, interim storage, and the final disposal of spent fuels has been established. The cost for the management of spent fuels is surprisingly high and could include a lot of uncertainty. KAERI and Kyunghee University have developed cost estimation tools to evaluate the cost for a spent fuel management based on an engineering design and calculation. It is not easy to develop a tool for a cost estimation under the situation that the national policy on a spent fuel management has not yet been fixed at all. Thus, the current version of the computer program is based on the current conceptual design of each management system. The main purpose of this paper is to introduce the computer program developed for the cost analysis of a spent fuel management. In order to show the application of the program, a spent fuel management scenario is prepared, and the cost for the scenario is estimated

Practical methods to improve the development of computational software

International Nuclear Information System (INIS)

Osborne, A. G.; Harding, D. W.; Deinert, M. R.

2013-01-01

The use of computation has become ubiquitous in science and engineering. As the complexity of computer codes has increased, so has the need for robust methods to minimize errors. Past work has show that the number of functional errors is related the number of commands that a code executes. Since the late 1960's, major participants in the field of computation have encouraged the development of best practices for programming to help reduce coder induced error, and this has lead to the emergence of 'software engineering' as a field of study. Best practices for coding and software production have now evolved and become common in the development of commercial software. These same techniques, however, are largely absent from the development of computational codes by research groups. Many of the best practice techniques from the professional software community would be easy for research groups in nuclear science and engineering to adopt. This paper outlines the history of software engineering, as well as issues in modern scientific computation, and recommends practices that should be adopted by individual scientific programmers and university research groups. (authors)

A computer program for activation analysis

International Nuclear Information System (INIS)

Rantanen, J.; Rosenberg, R.J.

1983-01-01

A computer program for calculating the results of activation analysis is described. The program comprises two gamma spectrum analysis programs, STOAV and SAMPO and one program for calculating elemental concentrations, KVANT. STOAV is based on a simple summation of channels and SAMPO is based on fitting of mathematical functions. The programs are tested by analyzing the IAEA G-1 test spectra. In the determination of peak location SAMPO is somewhat better than STOAV and in the determination of peak area SAMPO is more than twice as accurate as STOAV. On the other hand, SAMPO is three times as expensive as STOAV with the use of a Cyber 170 computer. (author)

SCEAPI: A unified Restful Web API for High-Performance Computing

Science.gov (United States)

Rongqiang, Cao; Haili, Xiao; Shasha, Lu; Yining, Zhao; Xiaoning, Wang; Xuebin, Chi

2017-10-01

The development of scientific computing is increasingly moving to collaborative web and mobile applications. All these applications need high-quality programming interface for accessing heterogeneous computing resources consisting of clusters, grid computing or cloud computing. In this paper, we introduce our high-performance computing environment that integrates computing resources from 16 HPC centers across China. Then we present a bundle of web services called SCEAPI and describe how it can be used to access HPC resources with HTTP or HTTPs protocols. We discuss SCEAPI from several aspects including architecture, implementation and security, and address specific challenges in designing compatible interfaces and protecting sensitive data. We describe the functions of SCEAPI including authentication, file transfer and job management for creating, submitting and monitoring, and how to use SCEAPI in an easy-to-use way. Finally, we discuss how to exploit more HPC resources quickly for the ATLAS experiment by implementing the custom ARC compute element based on SCEAPI, and our work shows that SCEAPI is an easy-to-use and effective solution to extend opportunistic HPC resources.

ROBOT3: a computer program to calculate the in-pile three-dimensional bowing of cylindrical fuel rods (AWBA Development Program)

International Nuclear Information System (INIS)

Kovscek, S.E.; Martin, S.E.

1982-10-01

ROBOT3 is a FORTRAN computer program which is used in conjunction with the CYGRO5 computer program to calculate the time-dependent inelastic bowing of a fuel rod using an incremental finite element method. The fuel rod is modeled as a viscoelastic beam whose material properties are derived as perturbations of the CYGRO5 axisymmetric model. Fuel rod supports are modeled as displacement, force, or spring-type nodal boundary conditions. The program input is described and a sample problem is given

Computer Programming Education with Miranda

NARCIS (Netherlands)

Joosten, S.M.M.; van den Berg, Klaas

During the past four years, an experiment has been carried out with an introductory course in computer programming, based on functional programming. This article describes the background of this approach, the aim of the computer programming course, the outline and subject matter of the course parts

Description of mathematical models and computer programs

International Nuclear Information System (INIS)

1977-01-01

The paper gives a description of mathematical models and computer programs for analysing possible strategies for spent fuel management, with emphasis on economic analysis. The computer programs developed, describe the material flows, facility construction schedules, capital investment schedules and operating costs for the facilities used in managing the spent fuel. The computer programs use a combination of simulation and optimization procedures for the economic analyses. Many of the fuel cycle steps (such as spent fuel discharges, storage at the reactor, and transport to the RFCC) are described in physical and economic terms through simulation modeling, while others (such as reprocessing plant size and commissioning schedules, interim storage facility commissioning schedules etc.) are subjected to economic optimization procedures to determine the approximate lowest-cost plans from among the available feasible alternatives

Easy-to-Use UAV Ground Station Software for Low-Altitude Civil Operations, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We propose to design and develop easy-to-use Ground Control Station (GCS) software for low-altitude civil Unmanned Aerial Vehicle (UAV) operations. The GCS software...

Optimum topology for radial networks by using evolutionary computer programming; Topologia optima de redes radiais utilizando programacao evolucionaria

Energy Technology Data Exchange (ETDEWEB)

Pinto, Joao Luis [Instituto de Engenhariade Sistemas e Computadores (INESC), Porto (Portugal). E-mail: jpinto@duque.inescn.pt; Proenca, Luis Miguel [Instituto Superior de Linguas e Administracao (ISLA), Gaia (Portugal). E-mail: lproenca@inescn.pt

1999-07-01

This paper describes the using of Evolutionary Programming techniques for determination of the radial electric network topology, considering investment costs and losses. The work aims to demonstrate the particular easiness of coding and implementation and the parallelism implicit to the method as well, giving outstanding performance levels. As test example, a 43 bars and 75 alternative lines network has been used by describing an implementation of the algorithm in an Object Oriented platform.

A powerful, yet easy to use, computerized analysis of competitive protein binding and radioimmunoassay data

International Nuclear Information System (INIS)

English, J.E.

1981-01-01

A computerized method has been developed and tested for the automatic computation of data obtained from competitive radio-binding assays, that is easily used by computer and non-computer oriented individuals. The program requires a series of only eleven parameter lines coded from the assay protocol, followed by the data exactly as it is produced from a standard sample counter. From the set of parameters the program is able to find standard curves at scattered locations through an assay, check their 'log dose-logit response' least squares linear regression equations statistically for homogeneity of slopes and elevations, pool the standard curves and check the pooled least squares linear regression equation statistically for linearity and non-linearity. The results of the pooled standard curve is presented graphically and in tabular form. Using the linear equation for the pooled standard curves, the concentration for each unknown sample is predicted with its corresponding 95% confidence interval and presented in a table of unknowns. Also provided in the table of unknowns is a mean and standard error of the mean for all biological replicates, including footnote flags to warn the user when an unknown concentration: (i) is outside the 0-100% bound range; (ii) is estimated from a range outside that covered by the standards; or (iii) was estimated from the unusable tail regions of the standard curve. (Auth.)

Structured Parallel Programming Patterns for Efficient Computation

CERN Document Server

McCool, Michael; Robison, Arch

2012-01-01

Programming is now parallel programming. Much as structured programming revolutionized traditional serial programming decades ago, a new kind of structured programming, based on patterns, is relevant to parallel programming today. Parallel computing experts and industry insiders Michael McCool, Arch Robison, and James Reinders describe how to design and implement maintainable and efficient parallel algorithms using a pattern-based approach. They present both theory and practice, and give detailed concrete examples using multiple programming models. Examples are primarily given using two of th

Dexterous Manipulation: Making Remote Manipulators Easy to Use

International Nuclear Information System (INIS)

HARRIGAN, RAYMOND W.; BENNETT, PHIL C.

2001-01-01

Perhaps the most basic barrier to the widespread deployment of remote manipulators is that they are very difficult to use. Remote manual operations are fatiguing and tedious, while fully autonomous systems are seldom able to function in changing and unstructured environments. An alternative approach to these extremes is to exploit computer control while leaving the operator in the loop to take advantage of the operator's perceptual and decision-making capabilities. This report describes research that is enabling gradual introduction of computer control and decision making into operator-supervised robotic manipulation systems, and its integration on a commercially available, manually controlled mobile manipulator

GUI program to compute probabilistic seismic hazard analysis

International Nuclear Information System (INIS)

Shin, Jin Soo; Chi, H. C.; Cho, J. C.; Park, J. H.; Kim, K. G.; Im, I. S.

2006-12-01

The development of program to compute probabilistic seismic hazard is completed based on Graphic User Interface(GUI). The main program consists of three part - the data input processes, probabilistic seismic hazard analysis and result output processes. The probabilistic seismic hazard analysis needs various input data which represent attenuation formulae, seismic zoning map, and earthquake event catalog. The input procedure of previous programs based on text interface take a much time to prepare the data. The data cannot be checked directly on screen to prevent input erroneously in existing methods. The new program simplifies the input process and enable to check the data graphically in order to minimize the artificial error within limits of the possibility

Consumer and provider responses to a computerized version of the Illness Management and Recovery Program.

Science.gov (United States)

Wright-Berryman, Jennifer L; Salyers, Michelle P; O'Halloran, James P; Kemp, Aaron S; Mueser, Kim T; Diazoni, Amanda J

2013-12-01

To explore mental health consumer and provider responses to a computerized version of the Illness Management and Recovery (IMR) program. Semistructured interviews were conducted to gather data from 6 providers and 12 consumers who participated in a computerized prototype of the IMR program. An inductive-consensus-based approach was used to analyze the interview responses. Qualitative analysis revealed consumers perceived various personal benefits and ease of use afforded by the new technology platform. Consumers also highly valued provider assistance and offered several suggestions to improve the program. The largest perceived barriers to future implementation were lack of computer skills and access to computers. Similarly, IMR providers commented on its ease and convenience, and the reduction of time intensive material preparation. Providers also expressed that the use of technology creates more options for the consumer to access treatment. The technology was acceptable, easy to use, and well-liked by consumers and providers. Clinician assistance with technology was viewed as helpful to get clients started with the program, as lack of computer skills and access to computers was a concern. Access to materials between sessions appears to be desired; however, given perceived barriers of computer skills and computer access, additional supports may be needed for consumers to achieve full benefits of a computerized version of IMR. PsycINFO Database Record (c) 2013 APA, all rights reserved.

The Use of Computer-Assisted Home Exercises to Preserve Physical Function after a Vestibular Rehabilitation Program: A Randomized Controlled Study

DEFF Research Database (Denmark)

Brandt, Michael Smærup; Læssøe, Uffe; Grönvall, Erik

2016-01-01

. Materials and Methods. Single-blind, randomized, controlled follow-up study. Fifty-seven elderly patients with chronic dizziness were randomly assigned to a computer-assisted home exercise program or to home exercises as described in printed instructions and followed for tree month after discharge from......, and quality of life three months following discharge from hospital. In this specific setup, no greater effect was found by introducing a computer-assisted training program, when compared to standard home training guided by printed instructions. This trial is registered with NCT01344408.......Objective. The purpose of this study was to evaluate whether elderly patients with vestibular dysfunction are able to preserve physical functional level, reduction in dizziness, and the patient's quality of life when assistive computer technology is used in comparison with printed instructions...

Learning ROS for robotics programming

CERN Document Server

Martinez, Aaron

2013-01-01

The book will take an easy-to-follow and engaging tutorial approach, providing a practical and comprehensive way to learn ROS.If you are a robotic enthusiast who wants to learn how to build and program your own robots in an easy-to-develop, maintainable and shareable way, ""Learning ROS for Robotics Programming"" is for you. In order to make the most of the book, you should have some C++ programming background, knowledge of GNU/Linux systems, and computer science in general. No previous background on ROS is required, since this book provides all the skills required. It is also advisable to hav

A computer program to calculate the committed dose equivalent after the inhalation of radioactivity

International Nuclear Information System (INIS)

Van der Woude, S.

1989-03-01

A growing number of people are, as part of their occupation, at risk of being exposed to radiation originating from sources inside their bodies. The quantification of this exposure is an important part of health physics. The International Commission on Radiological Protection (ICRP) developed a first-order kinetics compartmental model to determine the transport of radioactive material through the human body. The model and the parameters involved in its use, are discussed. A versatile computer program was developed to do the following after the in vivo measurement of either the organ- or whole-body activity: calculate the original amount of radioactive material which was inhaled (intake) by employing the ICRP compartmental model of the human body; compare this intake to calculated reference levels and state any action to be taken for the case under consideration; calculate the committed dose equivalent resulting from this intake. In the execution of the above-mentioned calculations, the computer program makes provision for different aerosol particle sizes and the effect of previous intakes. Model parameters can easily be changed to take the effects of, for instance, medical intervention into account. The computer program and the organization of the data in the input files are such that the computer program can be applied to any first-order kinetics compartmental model. The computer program can also conveniently be used for research on problems related to the application of the ICRP model. 18 refs., 25 figs., 5 tabs

Computer science: Key to a space program renaissance. The 1981 NASA/ASEE summer study on the use of computer science and technology in NASA. Volume 2: Appendices

Science.gov (United States)

Freitas, R. A., Jr. (Editor); Carlson, P. A. (Editor)

1983-01-01

Adoption of an aggressive computer science research and technology program within NASA will: (1) enable new mission capabilities such as autonomous spacecraft, reliability and self-repair, and low-bandwidth intelligent Earth sensing; (2) lower manpower requirements, especially in the areas of Space Shuttle operations, by making fuller use of control center automation, technical support, and internal utilization of state-of-the-art computer techniques; (3) reduce project costs via improved software verification, software engineering, enhanced scientist/engineer productivity, and increased managerial effectiveness; and (4) significantly improve internal operations within NASA with electronic mail, managerial computer aids, an automated bureaucracy and uniform program operating plans.

ZDS - a computer program for analysis of X-ray powder diffraction patterns

International Nuclear Information System (INIS)

Ondrus, P.

1993-01-01

The ZDS system creates an integrated environment of procedures for complete and precise analysis of raw powder diffraction patterns. The basis of the ZDS system is a graphic control centre for easy and user-friendly application of all included procedures. It offers a number of application procedures without an interaction with any data base. The program operates either in an automatic or manual mode. The manual mode makes possible specialized applications. The input and output of the data are compatible with Philips and Siemens powder diffraction software. The ZDS system runs with Intel 80286 or 80386-based PC computers with or without math-coprocesor. (orig.)

Structural mode significance using INCA. [Interactive Controls Analysis computer program

Science.gov (United States)

Bauer, Frank H.; Downing, John P.; Thorpe, Christopher J.

1990-01-01

Structural finite element models are often too large to be used in the design and analysis of control systems. Model reduction techniques must be applied to reduce the structural model to manageable size. In the past, engineers either performed the model order reduction by hand or used distinct computer programs to retrieve the data, to perform the significance analysis and to reduce the order of the model. To expedite this process, the latest version of INCA has been expanded to include an interactive graphical structural mode significance and model order reduction capability.

Inverse kinetics equations for on line measurement of reactivity using personal computer

International Nuclear Information System (INIS)

Ratemi, Wajdi; El Gadamsi, Walied; Beleid, Abdul Kariem

1993-01-01

Computer with their astonishing speed of calculations along with their easy connection to real systems, are very appropriate for digital measurements of real system variables. In the nuclear industry, such computer application will produce compact control rooms of real power plants, where information and results display can be obtained through push button concept. In our study, we use two personal computers for the purpose of simulation and measurement. One of them is used as a digital simulator to a real reactor, where we effectively simulate the reactor power through a cross talk network. The computed power is passed at certain chosen sampling time to the other computer. The purpose of the other computer is to use the inverse kinetics equations to calculate the reactivity parameter based on the received power and then it performs on line display of the power curve and the reactivity curve using color graphics. In this study, we use the one group version of the inverse kinetics algorithm which can easily be extended to larger group version. The language of programming used in Turbo BASIC, which is very comparable, in terms of efficiency, to FORTRAN language, besides its effective graphics routines. With the use of the extended version of the Inverse Kinetics algorithm, we can effectively apply this techniques of measurement for the purpose of on line display of the reactivity of the Tajoura Research Reactor. (author)

Using POGIL to Help Students Learn to Program

Science.gov (United States)

Hu, Helen H.; Shepherd, Tricia D.

2013-01-01

POGIL has been successfully implemented in a scientific computing course to teach science students how to program in Python. Following POGIL guidelines, the authors have developed guided inquiry activities that lead student teams to discover and understand programming concepts. With each iteration of the scientific computing course, the authors…

Reliability of lower limb alignment measures using an established landmark-based method with a customized computer software program

Science.gov (United States)

Sled, Elizabeth A.; Sheehy, Lisa M.; Felson, David T.; Costigan, Patrick A.; Lam, Miu; Cooke, T. Derek V.

2010-01-01

The objective of the study was to evaluate the reliability of frontal plane lower limb alignment measures using a landmark-based method by (1) comparing inter- and intra-reader reliability between measurements of alignment obtained manually with those using a computer program, and (2) determining inter- and intra-reader reliability of computer-assisted alignment measures from full-limb radiographs. An established method for measuring alignment was used, involving selection of 10 femoral and tibial bone landmarks. 1) To compare manual and computer methods, we used digital images and matching paper copies of five alignment patterns simulating healthy and malaligned limbs drawn using AutoCAD. Seven readers were trained in each system. Paper copies were measured manually and repeat measurements were performed daily for 3 days, followed by a similar routine with the digital images using the computer. 2) To examine the reliability of computer-assisted measures from full-limb radiographs, 100 images (200 limbs) were selected as a random sample from 1,500 full-limb digital radiographs which were part of the Multicenter Osteoarthritis (MOST) Study. Three trained readers used the software program to measure alignment twice from the batch of 100 images, with two or more weeks between batch handling. Manual and computer measures of alignment showed excellent agreement (intraclass correlations [ICCs] 0.977 – 0.999 for computer analysis; 0.820 – 0.995 for manual measures). The computer program applied to full-limb radiographs produced alignment measurements with high inter- and intra-reader reliability (ICCs 0.839 – 0.998). In conclusion, alignment measures using a bone landmark-based approach and a computer program were highly reliable between multiple readers. PMID:19882339

The Implementation of Blended Learning Using Android-Based Tutorial Video in Computer Programming Course II

Science.gov (United States)

Huda, C.; Hudha, M. N.; Ain, N.; Nandiyanto, A. B. D.; Abdullah, A. G.; Widiaty, I.

2018-01-01

Computer programming course is theoretical. Sufficient practice is necessary to facilitate conceptual understanding and encouraging creativity in designing computer programs/animation. The development of tutorial video in an Android-based blended learning is needed for students’ guide. Using Android-based instructional material, students can independently learn anywhere and anytime. The tutorial video can facilitate students’ understanding about concepts, materials, and procedures of programming/animation making in detail. This study employed a Research and Development method adapting Thiagarajan’s 4D model. The developed Android-based instructional material and tutorial video were validated by experts in instructional media and experts in physics education. The expert validation results showed that the Android-based material was comprehensive and very feasible. The tutorial video was deemed feasible as it received average score of 92.9%. It was also revealed that students’ conceptual understanding, skills, and creativity in designing computer program/animation improved significantly.

Four-Cylinder Stirling-Engine Computer Program

Science.gov (United States)

Daniele, C. J.; Lorenzo, C. F.

1986-01-01

Computer program developed for simulating steady-state and transient performance of four-cylinder Stirling engine. In model, four cylinders interconnected by four working spaces. Each working space contains seven volumes: one for expansion space, heater, cooler, and compression space and three for regenerator. Thermal time constant for regenerator mass associated with each regenator gas volume. Former code generates results very quickly, since it has only 14 state variables with no energy equation. Current code then used to study various aspects of Stirling engine in much more detail. Program written in FORTRAN IV for use on IBM 370 computer.

Rationale and study protocol of the EASY Minds (Encouraging Activity to Stimulate Young Minds) program: cluster randomized controlled trial of a primary school-based physical activity integration program for mathematics.

Science.gov (United States)

Riley, Nicholas; Lubans, David R; Holmes, Kathryn; Morgan, Philip J

2014-08-08

Novel strategies are required to increase school-based physical activity levels of children. Integrating physical activity in mathematics lessons may lead to improvements in students' physical activity levels as well as enjoyment, engagement and learning. The primary aim of this study is to evaluate the impact of a curriculum-based physical activity integration program known as EASY Minds (Encouraging Activity to Stimulate Young Minds) on children's daily school time physical activity levels. Secondary aims include exploring the impact of EASY Minds on their engagement and 'on task' behaviour in mathematics. Grade 5/6 classes from eight public schools in New South Wales, Australia will be randomly allocated to intervention (n = 4) or control (n = 4) groups. Teachers from the intervention group will receive one day of professional development, a resource pack and asked to adapt their lessons to embed movement-based learning in their daily mathematics program in at least three lessons per week over a six week period. Intervention support will be provided via a weekly email and three lesson observations. The primary outcomes will be children's physical activity levels (accelerometry) across both the school day and during mathematics lessons (moderate-to-vigorous physical activity and sedentary time). Children's 'on-task' behaviour, enjoyment of mathematics and mathematics attainment will be assessed as secondary outcomes. A detailed process evaluation will be undertaken. EASY Minds is an innovative intervention that has the potential to improve key physical and academic outcomes for primary school aged children and help guide policy and practice regarding the teaching of mathematics. Australian and New Zealand Clinical Trials Register ACTRN12613000637741 13/05/2013.

Program package for the computation of lenses and deflectors

International Nuclear Information System (INIS)

Lencova, B.; Wisselink, G.

1990-01-01

In this paper a set of computer programs for the design of electrostatic and magnetic electron lenses and for the design of multipoles for electron microscopy and lithography is described. The two-dimensional field computation is performed by the finite-element method. In order to meet the high demands on accuracy, the programs include the use of a variable step in the fine mesh made with an automeshing procedure, improved methods for coefficient evaluation, a fast solution procedure for the linear equations, and modified algorithms for computation of multipoles and electrostatic lenses. They allow for a fast and accurate computation of electron optical elements. For the input and modification of data, and for presentation of results, graphical menu driven programs written for personal computers are used. For the computation of electron optical properties axial fields are used. (orig.)

Debugging a high performance computing program

Science.gov (United States)

Gooding, Thomas M.

2013-08-20

Methods, apparatus, and computer program products are disclosed for debugging a high performance computing program by gathering lists of addresses of calling instructions for a plurality of threads of execution of the program, assigning the threads to groups in dependence upon the addresses, and displaying the groups to identify defective threads.

SHOCK-JR: a computer program to analyze impact response of shipping container

International Nuclear Information System (INIS)

Ikushima, Takeshi; Nakazato, Chikara; Shimoda, Osamu; Uchino, Mamoru.

1983-02-01

The report is provided for using a computer program, SHOCK-JR, which is used to analyze the impact response of shipping containers. Descriptions are the mathematical model, method of analysis, structures of the program and the input and output variables. The program solves the equations of motion for a one-dimensional, lumped mass and nonlinear spring model. The solution procedure uses Runge-Kutta-Gill and Newmark-β methods. SHOCK-JR is a revised version of SHOCK, which was developed by ORNL. In SHOCK-JR, SI dimension is used and graphical output is available. (author)

Teaching Scientific Computing: A Model-Centered Approach to Pipeline and Parallel Programming with C

Directory of Open Access Journals (Sweden)

Vladimiras Dolgopolovas

2015-01-01

Full Text Available The aim of this study is to present an approach to the introduction into pipeline and parallel computing, using a model of the multiphase queueing system. Pipeline computing, including software pipelines, is among the key concepts in modern computing and electronics engineering. The modern computer science and engineering education requires a comprehensive curriculum, so the introduction to pipeline and parallel computing is the essential topic to be included in the curriculum. At the same time, the topic is among the most motivating tasks due to the comprehensive multidisciplinary and technical requirements. To enhance the educational process, the paper proposes a novel model-centered framework and develops the relevant learning objects. It allows implementing an educational platform of constructivist learning process, thus enabling learners’ experimentation with the provided programming models, obtaining learners’ competences of the modern scientific research and computational thinking, and capturing the relevant technical knowledge. It also provides an integral platform that allows a simultaneous and comparative introduction to pipelining and parallel computing. The programming language C for developing programming models and message passing interface (MPI and OpenMP parallelization tools have been chosen for implementation.

Computer programs for display. [magnetic tapes - project planning/NASA programs

Science.gov (United States)

1975-01-01

The developments of an information storage and retrieval system are presented. Computer programs used in the system are described; the programs allow display messages to be placed on disks in an off-line environment permitting a more efficient use of memory. A time table that shows complete and scheduled developments of the system is given.

Computer programming in the UK undergraduate mathematics curriculum

Science.gov (United States)

Sangwin, Christopher J.; O'Toole, Claire

2017-11-01

This paper reports a study which investigated the extent to which undergraduate mathematics students in the United Kingdom are currently taught to programme a computer as a core part of their mathematics degree programme. We undertook an online survey, with significant follow-up correspondence, to gather data on current curricula and received replies from 46 (63%) of the departments who teach a BSc mathematics degree. We found that 78% of BSc degree courses in mathematics included computer programming in a compulsory module but 11% of mathematics degree programmes do not teach programming to all their undergraduate mathematics students. In 2016, programming is most commonly taught to undergraduate mathematics students through imperative languages, notably MATLAB, using numerical analysis as the underlying (or parallel) mathematical subject matter. Statistics is a very popular choice in optional courses, using the package R. Computer algebra systems appear to be significantly less popular for compulsory first-year courses than a decade ago, and there was no mention of logic programming, functional programming or automatic theorem proving software. The modal form of assessment of computing modules is entirely by coursework (i.e. no examination).

Computer-aided proofs for multiparty computation with active security

DEFF Research Database (Denmark)

Haagh, Helene; Karbyshev, Aleksandr; Oechsner, Sabine

2018-01-01

Secure multi-party computation (MPC) is a general cryptographic technique that allows distrusting parties to compute a function of their individual inputs, while only revealing the output of the function. It has found applications in areas such as auctioning, email filtering, and secure...... teleconference. Given its importance, it is crucial that the protocols are specified and implemented correctly. In the programming language community it has become good practice to use computer proof assistants to verify correctness proofs. In the field of cryptography, EasyCrypt is the state of the art proof...... public-key encryption, signatures, garbled circuits and differential privacy. Here we show for the first time that it can also be used to prove security of MPC against a malicious adversary. We formalize additive and replicated secret sharing schemes and apply them to Maurer's MPC protocol for secure...

A computer program for the estimation of time of death

DEFF Research Database (Denmark)

Lynnerup, N

1993-01-01

In the 1960s Marshall and Hoare presented a "Standard Cooling Curve" based on their mathematical analyses on the postmortem cooling of bodies. Although fairly accurate under standard conditions, the "curve" or formula is based on the assumption that the ambience temperature is constant and that t......In the 1960s Marshall and Hoare presented a "Standard Cooling Curve" based on their mathematical analyses on the postmortem cooling of bodies. Although fairly accurate under standard conditions, the "curve" or formula is based on the assumption that the ambience temperature is constant...... cooling of bodies is presented. It is proposed that by having a computer program that solves the equation, giving the length of the cooling period in response to a certain rectal temperature, and which allows easy comparison of multiple solutions, the uncertainties related to ambience temperature...

Computer programs at SRL to evaluate environmental effects SRP operations and postulated accidental releases

International Nuclear Information System (INIS)

Cooper, R.E.

1975-09-01

Savannah River Plant operations unavoidably result in the release of some chemical and radioactive effluents to the environs. The most environmentally significant releases are gaseous effluents to the atmosphere; computer codes dealing with these atmospheric releases are discussed in this report. There is a wide variety of effluents, both chemical and radioactive, to be considered, and each must be correlated with meteorological dispersion data as a function of time to estimate the environmental effects. In addition, large inventories of toxic and radioactive materials in some facilities represent a potential for accidental releases. Accidents are postulated for these facilities, and the environmental effects of resulting releases are again evaluated by correlating with meteorological dispersion data. In accordance with AEC Regulatory Guide 23, a 2-year meteorological data base is used in performing all analyses. Due to the diversity of possible releases and the large meteorological data base, the environmental analyses are necessarily performed with the aid of a large computer facility. Several computer programs have been written to facilitate these analyses according to the type of analysis desired. The computer programs described in this report are basically of three categories: probability distributions of estimated concentrations or doses as a function of distance from a point of origin, estimates of average concentrations or doses over a specified time period such as annual averages, and some miscellaneous programs in support of the first two categories to optimize the use of the computing facility. A complete documentation of each program is included with a program listing and sample input-output

Exploring Poetry through Interactive Computer Programs.

Science.gov (United States)

Nimchinsky, Howard; Camp, Jocelyn

The goal of a project was to design, test, and evaluate several computer programs that allow students in introductory literature and poetry courses to explore a poem in detail and, through a dialogue with the program, to develop their own interpretation of it. Computer programs were completed on poems by Robert Frost and W.H. Auden. Both programs…

Approach to Computer Implementation of Mathematical Model of 3-Phase Induction Motor

Science.gov (United States)

Pustovetov, M. Yu

2018-03-01

This article discusses the development of the computer model of an induction motor based on the mathematical model in a three-phase stator reference frame. It uses an approach that allows combining during preparation of the computer model dual methods: means of visual programming circuitry (in the form of electrical schematics) and logical one (in the form of block diagrams). The approach enables easy integration of the model of an induction motor as part of more complex models of electrical complexes and systems. The developed computer model gives the user access to the beginning and the end of a winding of each of the three phases of the stator and rotor. This property is particularly important when considering the asymmetric modes of operation or when powered by the special circuitry of semiconductor converters.

Experience with a distributed computing system for magnetic field analysis

International Nuclear Information System (INIS)

Newman, M.J.

1978-08-01

The development of a general purpose computer system, THESEUS, is described the initial use for which has been magnetic field analysis. The system involves several computers connected by data links. Some are small computers with interactive graphics facilities and limited analysis capabilities, and others are large computers for batch execution of analysis programs with heavy processor demands. The system is highly modular for easy extension and highly portable for transfer to different computers. It can easily be adapted for a completely different application. It provides a highly efficient and flexible interface between magnet designers and specialised analysis programs. Both the advantages and problems experienced are highlighted, together with a mention of possible future developments. (U.K.)

A program to compute the soft Robinson-Foulds distance between phylogenetic networks.

Science.gov (United States)

Lu, Bingxin; Zhang, Louxin; Leong, Hon Wai

2017-03-14

Over the past two decades, phylogenetic networks have been studied to model reticulate evolutionary events. The relationships among phylogenetic networks, phylogenetic trees and clusters serve as the basis for reconstruction and comparison of phylogenetic networks. To understand these relationships, two problems are raised: the tree containment problem, which asks whether a phylogenetic tree is displayed in a phylogenetic network, and the cluster containment problem, which asks whether a cluster is represented at a node in a phylogenetic network. Both the problems are NP-complete. A fast exponential-time algorithm for the cluster containment problem on arbitrary networks is developed and implemented in C. The resulting program is further extended into a computer program for fast computation of the Soft Robinson-Foulds distance between phylogenetic networks. Two computer programs are developed for facilitating reconstruction and validation of phylogenetic network models in evolutionary and comparative genomics. Our simulation tests indicated that they are fast enough for use in practice. Additionally, the distribution of the Soft Robinson-Foulds distance between phylogenetic networks is demonstrated to be unlikely normal by our simulation data.

The Dynamic Geometrisation of Computer Programming

Science.gov (United States)

Sinclair, Nathalie; Patterson, Margaret

2018-01-01

The goal of this paper is to explore dynamic geometry environments (DGE) as a type of computer programming language. Using projects created by secondary students in one particular DGE, we analyse the extent to which the various aspects of computational thinking--including both ways of doing things and particular concepts--were evident in their…

GUI program to compute probabilistic seismic hazard analysis

International Nuclear Information System (INIS)

Shin, Jin Soo; Chi, H. C.; Cho, J. C.; Park, J. H.; Kim, K. G.; Im, I. S.

2005-12-01

The first stage of development of program to compute probabilistic seismic hazard is completed based on Graphic User Interface (GUI). The main program consists of three part - the data input processes, probabilistic seismic hazard analysis and result output processes. The first part has developed and others are developing now in this term. The probabilistic seismic hazard analysis needs various input data which represent attenuation formulae, seismic zoning map, and earthquake event catalog. The input procedure of previous programs based on text interface take a much time to prepare the data. The data cannot be checked directly on screen to prevent input erroneously in existing methods. The new program simplifies the input process and enable to check the data graphically in order to minimize the artificial error within the limits of the possibility

Computer-based Programs in Speech Therapy of Dyslalia and Dyslexia- Dysgraphia

Directory of Open Access Journals (Sweden)

Mirela Danubianu

2010-04-01

Full Text Available During the last years, the researchers and therapists in speech therapy have been more and more concerned with the elaboration and use of computer programs in speech disorders therapy. The main objective of this study was to evaluate the therapeutic effectiveness of computer-based programs for the Romanian language in speech therapy. Along the study, we will present the experimental research through assessing the effectiveness of computer programs in the speech therapy for speech disorders: dyslalia, dyslexia and dysgraphia. Methodologically, the use of the computer in the therapeutic phases was carried out with the help of some computer-based programs (Logomon, Dislex-Test etc. that we elaborated and we experimented with during several years of therapeutic activity. The sample used in our experiments was composed of 120 subjects; two groups of 60 children with speech disorders were selected for both speech disorders: 30 for the experimental ('computer-based' group and 30 for the control ('classical method' group. The study hypotheses verified whether the results, obtained by the subjects within the experimental group, improved significantly after using the computer-based program, compared to the subjects within the control group, who did not use this program but got a classical therapy. The hypotheses were confirmed for the speech disorders included in this research; the conclusions of the study confirm the advantages of using computer-based programs within speech therapy by correcting these disorders, as well as due to the positive influence these programs have on the development of children’s personality.

The Efficiency of Linda for General Purpose Scientific Programming

Directory of Open Access Journals (Sweden)

Timothy G. Mattson

1994-01-01

Full Text Available Linda (Linda is a registered trademark of Scientific Computing Associates, Inc. is a programming language for coordinating the execution and interaction of processes. When combined with a language for computation (such as C or Fortran, the resulting hybrid language can be used to write portable programs for parallel and distributed multiple instruction multiple data (MIMD computers. The Linda programming model is based on operations that read, write, and erase a virtual shared memory. It is easy to use, and lets the programmer code in a very expressive, uncoupled programming style. These benefits, however, are of little value unless Linda programs execute efficiently. The goal of this article is to demonstrate that Linda programs are efficient making Linda an effective general purpose tool for programming MIMD parallel computers. Two arguments for Linda's efficiency are given; the first is based on Linda's implementation and the second on a range of case studies spanning a complete set of parallel algorithm classes.

Optical Design Using Small Dedicated Computers

Science.gov (United States)

Sinclair, Douglas C.

1980-09-01

Since the time of the 1975 International Lens Design Conference, we have developed a series of optical design programs for Hewlett-Packard desktop computers. The latest programs in the series, OSLO-25G and OSLO-45G, have most of the capabilities of general-purpose optical design programs, including optimization based on exact ray-trace data. The computational techniques used in the programs are similar to ones used in other programs, but the creative environment experienced by a designer working directly with these small dedicated systems is typically much different from that obtained with shared-computer systems. Some of the differences are due to the psychological factors associated with using a system having zero running cost, while others are due to the design of the program, which emphasizes graphical output and ease of use, as opposed to computational speed.

Creating the computer player: an engaging and collaborative approach to introduce computational thinking by combining ‘unplugged’ activities with visual programming

Directory of Open Access Journals (Sweden)

Anna Gardeli

2017-11-01

Full Text Available Ongoing research is being conducted on appropriate course design, practices and teacher interventions for improving the efficiency of computer science and programming courses in K-12 education. The trend is towards a more constructivist problem-based learning approach. Computational thinking, which refers to formulating and solving problems in a form that can be efficiently processed by a computer, raises an important educational challenge. Our research aims to explore possible ways of enriching computer science teaching with a focus on development of computational thinking. We have prepared and evaluated a learning intervention for introducing computer programming to children between 10 and 14 years old; this involves students working in groups to program the behavior of the computer player of a well-known game. The programming process is split into two parts. First, students design a high-level version of their algorithm during an ‘unplugged’ pen & paper phase, and then they encode their solution as an executable program in a visual programming environment. Encouraging evaluation results have been achieved regarding the educational and motivational value of the proposed approach.

A Computer-Aided Writing Program for Learning Disabled Adolescents.

Science.gov (United States)

Fais, Laurie; Wanderman, Richard

The paper describes the application of a computer-assisted writing program in a special high school for learning disabled and dyslexic students and reports on a study of the program's effectiveness. Particular advantages of the Macintosh Computer for such a program are identified including use of the mouse pointing tool, graphic icons to identify…

User's manual for computer program BASEPLOT

Science.gov (United States)

Sanders, Curtis L.

2002-01-01

The checking and reviewing of daily records of streamflow within the U.S. Geological Survey is traditionally accomplished by hand-plotting and mentally collating tables of data. The process is time consuming, difficult to standardize, and subject to errors in computation, data entry, and logic. In addition, the presentation of flow data on the internet requires more timely and accurate computation of daily flow records. BASEPLOT was developed for checking and review of primary streamflow records within the U.S. Geological Survey. Use of BASEPLOT enables users to (1) provide efficiencies during the record checking and review process, (2) improve quality control, (3) achieve uniformity of checking and review techniques of simple stage-discharge relations, and (4) provide a tool for teaching streamflow computation techniques. The BASEPLOT program produces tables of quality control checks and produces plots of rating curves and discharge measurements; variable shift (V-shift) diagrams; and V-shifts converted to stage-discharge plots, using data stored in the U.S. Geological Survey Automatic Data Processing System database. In addition, the program plots unit-value hydrographs that show unit-value stages, shifts, and datum corrections; input shifts, datum corrections, and effective dates; discharge measurements; effective dates for rating tables; and numeric quality control checks. Checklist/tutorial forms are provided for reviewers to ensure completeness of review and standardize the review process. The program was written for the U.S. Geological Survey SUN computer using the Statistical Analysis System (SAS) software produced by SAS Institute, Incorporated.

Rationale and study protocol of the EASY Minds (Encouraging Activity to Stimulate Young Minds) program: cluster randomized controlled trial of a primary school-based physical activity integration program for mathematics

OpenAIRE

Riley, Nicholas; Lubans, David R; Holmes, Kathryn; Morgan, Philip J

2014-01-01

Background Novel strategies are required to increase school-based physical activity levels of children. Integrating physical activity in mathematics lessons may lead to improvements in students’ physical activity levels as well as enjoyment, engagement and learning. The primary aim of this study is to evaluate the impact of a curriculum-based physical activity integration program known as EASY Minds (Encouraging Activity to Stimulate Young Minds) on children’s daily school time physical activ...

Porting linac application programs to a windowing environment

International Nuclear Information System (INIS)

Nonglaton, J.M.; Raich, U.

1992-01-01

We report our experience in porting Linac application programs written for Camac controlled hardware consoles to an X-Windows/Motif based workstation environment. Application programs acquire their parameter values from a front end computer (FEC), controlling the acceleration process, via a local area network. The timing for data acquisition and control is determined by the particle source timing. Two server programs on the FEC for repetitive acquisition and command-response mode will be described. The application programs on the workstations access a common parameter access server who establishes the necessary connection to the parameters on the FEC. It displays the parameter's current values and allows control through Motif widgets. An interactive synoptics editor and its corresponding driver program allow easy generation of synoptics displays and interaction through command panels. (author)

The Y2K program for scientific-analysis computer programs at AECL

International Nuclear Information System (INIS)

Popovic, J.; Gaver, C.; Chapman, D.

1999-01-01

The evaluation of scientific-analysis computer programs for year-2000 compliance is part of AECL' s year-2000 (Y2K) initiative, which addresses both the infrastructure systems at AECL and AECL's products and services. This paper describes the Y2K-compliance program for scientific-analysis computer codes. This program involves the integrated evaluation of the computer hardware, middleware, and third-party software in addition to the scientific codes developed in-house. The project involves several steps: the assessment of the scientific computer programs for Y2K compliance, performing any required corrective actions, porting the programs to Y2K-compliant platforms, and verification of the programs after porting. Some programs or program versions, deemed no longer required in the year 2000 and beyond, will be retired and archived. (author)

The Y2K program for scientific-analysis computer programs at AECL

International Nuclear Information System (INIS)

Popovic, J.; Gaver, C.; Chapman, D.

1999-01-01

The evaluation of scientific analysis computer programs for year-2000 compliance is part of AECL's year-2000 (Y2K) initiative, which addresses both the infrastructure systems at AECL and AECL's products and services. This paper describes the Y2K-compliance program for scientific-analysis computer codes. This program involves the integrated evaluation of the computer hardware, middleware, and third-party software in addition to the scientific codes developed in-house. The project involves several steps: the assessment of the scientific computer programs for Y2K compliance, performing any required corrective actions, porting the programs to Y2K-compliant platforms, and verification of the programs after porting. Some programs or program versions, deemed no longer required in the year 2000 and beyond, will be retired and archived. (author)

COMPARISON OF PYTHON (AN OPEN SOURCE PROGRAMMING LANGUAGE) WITH OTHER PROGRAMMING LANGUAGES

OpenAIRE

Sushil Kumar*1 & Richa Aggarwal2

2018-01-01

Language is a communication tool through which we can communicate with each other like Hindi, English etc any other language. So if we want to communicate with computer, we need computer programming languages. So in computer we have two types of languages, one is low level language which is easily understood by computer but difficult to learn. Second is high level language which is same like English language, not understood by computer but easy to learn. Python is a high level language. This...

Software survey: VOSviewer, a computer program for bibliometric mapping

NARCIS (Netherlands)

N.J.P. van Eck (Nees Jan); L. Waltman (Ludo)

2010-01-01

textabstractWe present VOSviewer, a freely available computer program that we have developed for constructing and viewing bibliometric maps. Unlike most computer programs that are used for bibliometric mapping, VOSviewer pays special attention to the graphical representation of bibliometric maps.

Towards a Serious Game to Help Students Learn Computer Programming

Directory of Open Access Journals (Sweden)

Mathieu Muratet

2009-01-01

Full Text Available Video games are part of our culture like TV, movies, and books. We believe that this kind of software can be used to increase students' interest in computer science. Video games with other goals than entertainment, serious games, are present, today, in several fields such as education, government, health, defence, industry, civil security, and science. This paper presents a study around a serious game dedicated to strengthening programming skills. Real-Time Strategy, which is a popular game genre, seems to be the most suitable kind of game to support such a serious game. From programming teaching features to video game characteristics, we define a teaching organisation to experiment if a serious game can be adapted to learn programming.

Computer programs for nonlinear algebraic equations

International Nuclear Information System (INIS)

Asaoka, Takumi

1977-10-01

We have provided principal computer subroutines for obtaining numerical solutions of nonlinear algebraic equations through a review of the various methods. Benchmark tests were performed on these subroutines to grasp the characteristics of them compared to the existing subroutines. As computer programs based on the secant method, subroutines of the Muller's method using the Chambers' algorithm were newly developed, in addition to the equipment of subroutines of the Muller's method itself. The programs based on the Muller-Chambers' method are useful especially for low-order polynomials with complex coefficients except for the case of finding the triple roots, three close roots etc. In addition, we have equipped subroutines based on the Madsen's algorithm, a variant of the Newton's method. The subroutines have revealed themselves very useful as standard programs because all the roots are found accurately for every case though they take longer computing time than other subroutines for low-order polynomials. It is shown also that an existing subroutine of the Bairstow's method gives the fastest algorithm for polynomials with complex coefficients, except for the case of finding the triple roots etc. We have provided also subroutines to estimate error bounds for all the roots produced with the various algorithms. (auth.)

CheckDen, a program to compute quantum molecular properties on spatial grids.

Science.gov (United States)

Pacios, Luis F; Fernandez, Alberto

2009-09-01

CheckDen, a program to compute quantum molecular properties on a variety of spatial grids is presented. The program reads as unique input wavefunction files written by standard quantum packages and calculates the electron density rho(r), promolecule and density difference function, gradient of rho(r), Laplacian of rho(r), information entropy, electrostatic potential, kinetic energy densities G(r) and K(r), electron localization function (ELF), and localized orbital locator (LOL) function. These properties can be calculated on a wide range of one-, two-, and three-dimensional grids that can be processed by widely used graphics programs to render high-resolution images. CheckDen offers also other options as extracting separate atom contributions to the property computed, converting grid output data into CUBE and OpenDX volumetric data formats, and perform arithmetic combinations with grid files in all the recognized formats.

Toward using games to teach fundamental computer science concepts

Science.gov (United States)

Edgington, Jeffrey Michael

Video and computer games have become an important area of study in the field of education. Games have been designed to teach mathematics, physics, raise social awareness, teach history and geography, and train soldiers in the military. Recent work has created computer games for teaching computer programming and understanding basic algorithms. We present an investigation where computer games are used to teach two fundamental computer science concepts: boolean expressions and recursion. The games are intended to teach the concepts and not how to implement them in a programming language. For this investigation, two computer games were created. One is designed to teach basic boolean expressions and operators and the other to teach fundamental concepts of recursion. We describe the design and implementation of both games. We evaluate the effectiveness of these games using before and after surveys. The surveys were designed to ascertain basic understanding, attitudes and beliefs regarding the concepts. The boolean game was evaluated with local high school students and students in a college level introductory computer science course. The recursion game was evaluated with students in a college level introductory computer science course. We present the analysis of the collected survey information for both games. This analysis shows a significant positive change in student attitude towards recursion and modest gains in student learning outcomes for both topics.

Programs for Testing Processor-in-Memory Computing Systems

Science.gov (United States)

Katz, Daniel S.

2006-01-01

The Multithreaded Microbenchmarks for Processor-In-Memory (PIM) Compilers, Simulators, and Hardware are computer programs arranged in a series for use in testing the performances of PIM computing systems, including compilers, simulators, and hardware. The programs at the beginning of the series test basic functionality; the programs at subsequent positions in the series test increasingly complex functionality. The programs are intended to be used while designing a PIM system, and can be used to verify that compilers, simulators, and hardware work correctly. The programs can also be used to enable designers of these system components to examine tradeoffs in implementation. Finally, these programs can be run on non-PIM hardware (either single-threaded or multithreaded) using the POSIX pthreads standard to verify that the benchmarks themselves operate correctly. [POSIX (Portable Operating System Interface for UNIX) is a set of standards that define how programs and operating systems interact with each other. pthreads is a library of pre-emptive thread routines that comply with one of the POSIX standards.

A computer program for fitting smooth surfaces to an aircraft configuration and other three dimensional geometries

Science.gov (United States)

Craidon, C. B.

1975-01-01

A computer program that uses a three-dimensional geometric technique for fitting a smooth surface to the component parts of an aircraft configuration is presented. The resulting surface equations are useful in performing various kinds of calculations in which a three-dimensional mathematical description is necessary. Programs options may be used to compute information for three-view and orthographic projections of the configuration as well as cross-section plots at any orientation through the configuration. The aircraft geometry input section of the program may be easily replaced with a surface point description in a different form so that the program could be of use for any three-dimensional surface equations.

The Effect of In-Service Training of Computer Science Teachers on Scratch Programming Language Skills Using an Electronic Learning Platform on Programming Skills and the Attitudes towards Teaching Programming

Science.gov (United States)

Alkaria, Ahmed; Alhassan, Riyadh

2017-01-01

This study was conducted to examine the effect of in-service training of computer science teachers in Scratch language using an electronic learning platform on acquiring programming skills and attitudes towards teaching programming. The sample of this study consisted of 40 middle school computer science teachers. They were assigned into two…

A visual interface to computer programs for linkage analysis.

Science.gov (United States)

Chapman, C J

1990-06-01

This paper describes a visual approach to the input of information about human families into computer data bases, making use of the GEM graphic interface on the Atari ST. Similar approaches could be used on the Apple Macintosh or on the IBM PC AT (to which it has been transferred). For occasional users of pedigree analysis programs, this approach has considerable advantages in ease of use and accessibility. An example of such use might be the analysis of risk in families with Huntington disease using linked RFLPs. However, graphic interfaces do make much greater demands on the programmers of these systems.

Learners’ views about cloud computing-based group activities

Directory of Open Access Journals (Sweden)

Yildirim Serkan

2017-01-01

Full Text Available Thanks to its use independently of time and place during the process of software development and by making it easier to access to information with mobile technologies, cloud based environments attracted the attention of education world and this technology started to be used in various activities. In this study, for programming education, the effects of extracurricular group assignments in cloud based environments on learners were evaluated in terms of group work satisfaction, ease of use and user satisfaction. Within the scope of computer programming education lasting eight weeks, a total of 100 students participated in the study including 34 men and 66 women. Participants were divided into groups of at least three people considering the advantages of cooperative learning in programming education. In this study carried out in both conventional and cloud based environments, between groups factorial design was used as research design. The data collected by questionnaires of opinions of group work were examined with quantitative analysis method. According to the study results extracurricular learning activities as group activity created satisfaction. However, perceptions of easy use of the environment and user satisfaction were partly positive. Despite the similar understandings; male participants were easier to perceive use of cloud computing based environments. Some variables such as class level, satisfaction, computer and internet usage time do not have any effect on satisfaction and perceptions of ease of use. Evening class students stated that they found it easy to use cloud based learning environments and became more satisfied with using these environments besides being happier with group work than daytime students.

An easy-to-use semiquantitative food record validated for energy intake by using doubly labelled water technique.

Science.gov (United States)

Koebnick, C; Wagner, K; Thielecke, F; Dieter, G; Höhne, A; Franke, A; Garcia, A L; Meyer, H; Hoffmann, I; Leitzmann, P; Trippo, U; Zunft, H J F

2005-09-01

Estimating dietary intake is important for both epidemiological and clinical studies, but often lacks accuracy. To investigate the accuracy and validity of energy intake estimated by an easy-to-use semiquantitative food record (EI(SQFR)) compared to total energy expenditure (TEE) estimated by doubly labelled water technique (EE(DLW)). TEE was measured in 29 nonobese subjects using the doubly labelled water method over a period of 14 days. Within this period, subjects reported their food consumption by a newly developed semiquantitative food record for 4 consecutive days. Energy intake was calculated using the German Food Code and Nutrition Data Base BLS II.3. A good correlation was observed between EI(SQFR) and EE(DLW) (r = 0.685, P 20% in nine subjects (31%). In five subjects (17%), an overestimation of EI(SQFR) was observed. The easy-to-use semiquantitative food record provided good estimates of EI in free-living and nonobese adults without prior detailed verbal instructions. The presented food record has limitations regarding accuracy at the individual level.

Computer Aided Design System for Developing Musical Fountain Programs

Institute of Scientific and Technical Information of China (English)

刘丹; 张乃尧; 朱汉城

2003-01-01

A computer aided design system for developing musical fountain programs was developed with multiple functions such as intelligent design, 3-D animation, manual modification and synchronized motion to make the development process more efficient. The system first analyzed the music form and sentiment using many basic features of the music to select a basic fountain program. Then, this program is simulated with 3-D animation and modified manually to achieve the desired results. Finally, the program is transformed to a computer control program to control the musical fountain in time with the music. A prototype system for the musical fountain was also developed. It was tested with many styles of music and users were quite satisfied with its performance. By integrating various functions, the proposed computer aided design system for developing musical fountain programs greatly simplified the design of the musical fountain programs.

New approach for rapid assessment of trophic status of Yellow Sea and East China Sea using easy-to-measure parameters

Science.gov (United States)

Kong, Xianyu; Liu, Yanfang; Jian, Huimin; Su, Rongguo; Yao, Qingzhen; Shi, Xiaoyong

2017-10-01

To realize potential cost savings in coastal monitoring programs and provide timely advice for marine management, there is an urgent need for efficient evaluation tools based on easily measured variables for the rapid and timely assessment of estuarine and offshore eutrophication. In this study, using parallel factor analysis (PARAFAC), principal component analysis (PCA), and discriminant function analysis (DFA) with the trophic index (TRIX) for reference, we developed an approach for rapidly assessing the eutrophication status of coastal waters using easy-to-measure parameters, including chromophoric dissolved organic matter (CDOM), fluorescence excitation-emission matrices, CDOM UV-Vis absorbance, and other water-quality parameters (turbidity, chlorophyll a, and dissolved oxygen). First, we decomposed CDOM excitation-emission matrices (EEMs) by PARAFAC to identify three components. Then, we applied PCA to simplify the complexity of the relationships between the water-quality parameters. Finally, we used the PCA score values as independent variables in DFA to develop a eutrophication assessment model. The developed model yielded classification accuracy rates of 97.1%, 80.5%, 90.3%, and 89.1% for good, moderate, and poor water qualities, and for the overall data sets, respectively. Our results suggest that these easy-to-measure parameters could be used to develop a simple approach for rapid in-situ assessment and monitoring of the eutrophication of estuarine and offshore areas.

Low-Budget Computer Programming in Your School (An Alternative to the Cost of Large Computers). Illinois Series on Educational Applications of Computers. No. 14.

Science.gov (United States)

Dennis, J. Richard; Thomson, David

This paper is concerned with a low cost alternative for providing computer experience to secondary school students. The brief discussion covers the programmable calculator and its relevance for teaching the concepts and the rudiments of computer programming and for computer problem solving. A list of twenty-five programming activities related to…

Program EPICSHOW. A computer code to allow interactive viewing of the EPIC data libraries (Version 98-1). Summary documentation

International Nuclear Information System (INIS)

Pronyaev, V.G.; McLaughlin, P.K.

1999-01-01

EPICSHOW (Electron Photon Interactive Code - Show Data) is an interactive graphics code that allows users to view and interact with neutron, photon, electron and light charged particle data. Besides on screen graphics the code provides hard copy in the form of tabulated listings and Postscript output files. The code has been implemented on UNIX, IBM-PC, Power MAC, and even Laptop computers. It should be relatively easy to use it on almost any computer. All of the data included in this system is based on the Lawrence Livermore National Laboratory Databases and the neutron and photon data is used in the TART97 Monte Carlo transport code system. (author)

EZLP: An Interactive Computer Program for Solving Linear Programming Problems. Final Report.

Science.gov (United States)

Jarvis, John J.; And Others

Designed for student use in solving linear programming problems, the interactive computer program described (EZLP) permits the student to input the linear programming model in exactly the same manner in which it would be written on paper. This report includes a brief review of the development of EZLP; narrative descriptions of program features,…

Gender and Stereotypes in Motivation to Study Computer Programming for Careers in Multimedia

Science.gov (United States)

Doube, Wendy; Lang, Catherine

2012-01-01

A multimedia university programme with relatively equal numbers of male and female students in elective programming subjects provided a rare opportunity to investigate female motivation to study and pursue computer programming in a career. The MSLQ was used to survey 85 participants. In common with research into deterrence of females from STEM…

DOSESCREEN: a computer program to aid dose placement

Science.gov (United States)

Kimberly C. Smith; Jacqueline L. Robertson

1984-01-01

Careful selection of an experimental design for a bioassay substantially improves the precision of effective dose (ED) estimates. Design considerations typically include determination of sample size, dose selection, and allocation of subjects to doses. DOSESCREEN is a computer program written to help investigators select an efficient design for the estimation of an...

The NEA computer program library: a possible GDMS application

International Nuclear Information System (INIS)

Schuler, W.

1978-01-01

NEA Computer Program library maintains a series of eleven sequential computer files, used for linked applications in managing their stock of computer codes for nuclear reactor calculations, storing index and program abstract information, and administering their service to requesters. The high data redundancy beween the files suggests that a data base approach would be valid and this paper suggests a possible 'schema' for an CODASYL GDMS

Near-Surface Seismic Velocity Data: A Computer Program For ...

African Journals Online (AJOL)

A computer program (NESURVELANA) has been developed in Visual Basic Computer programming language to carry out a near surface velocity analysis. The method of analysis used includes: Algorithms design and Visual Basic codes generation for plotting arrival time (ms) against geophone depth (m) employing the ...

Using Problem Solving to Teach a Programming Language.

Science.gov (United States)

Milbrandt, George

1995-01-01

Computer studies courses should incorporate as many computer concepts and programming language experiences as possible. A gradual increase in problem difficulty will help the student to understand various computer concepts, and the programming language's syntax and structure. A sidebar provides two examples of how to establish a learning…

EASI on the HP-25, HP-65, and HP-67

International Nuclear Information System (INIS)

Sasser, D.W.

1977-05-01

EASI (Estimate of Adversary Sequence Interruption) is an effective, simple method which has been developed for use in evaluating physical security systems. The usefulness of the method is enhanced by the fact that it can be implemented on a programmable pocket calculator. A program for the Texas Instruments SR-52 programmable pocket calculator has been developed and reported upon elsewhere. The purpose of this report is to provide programs for the Hewlett-Packard programmable pocket calculators

Using Visual Basic to Teach Programming for Geographers.

Science.gov (United States)

Slocum, Terry A.; Yoder, Stephen C.

1996-01-01

Outlines reasons why computer programming should be taught to geographers. These include experience using macro (scripting) languages and sophisticated visualization software, and developing a deeper understanding of general hardware and software capabilities. Discusses the distinct advantages and few disadvantages of the programming language…

New Mexico district work-effort analysis computer program

Science.gov (United States)

Hiss, W.L.; Trantolo, A.P.; Sparks, J.L.

1972-01-01

The computer program (CAN 2) described in this report is one of several related programs used in the New Mexico District cost-analysis system. The work-effort information used in these programs is accumulated and entered to the nearest hour on forms completed by each employee. Tabulating cards are punched directly from these forms after visual examinations for errors are made. Reports containing detailed work-effort data itemized by employee within each project and account and by account and project for each employee are prepared for both current-month and year-to-date periods by the CAN 2 computer program. An option allowing preparation of reports for a specified 3-month period is provided. The total number of hours worked on each account and project and a grand total of hours worked in the New Mexico District is computed and presented in a summary report for each period. Work effort not chargeable directly to individual projects or accounts is considered as overhead and can be apportioned to the individual accounts and projects on the basis of the ratio of the total hours of work effort for the individual accounts or projects to the total New Mexico District work effort at the option of the user. The hours of work performed by a particular section, such as General Investigations or Surface Water, are prorated and charged to the projects or accounts within the particular section. A number of surveillance or buffer accounts are employed to account for the hours worked on special events or on those parts of large projects or accounts that require a more detailed analysis. Any part of the New Mexico District operation can be separated and analyzed in detail by establishing an appropriate buffer account. With the exception of statements associated with word size, the computer program is written in FORTRAN IV in a relatively low and standard language level to facilitate its use on different digital computers. The program has been run only on a Control Data Corporation

The development of Sonic Pi and its use in educational partnerships: Co-creating pedagogies for learning computer programming

OpenAIRE

Aaron, S; Blackwell, Alan Frank; Burnard, Pamela Anne

2017-01-01

Sonic Pi is a new open source software tool and platform originally developed for the Raspberry Pi computer, designed to enable school children to learn programming by creating music. In this article we share insights from a scoping study on the development of Sonic Pi and its use in educational partnerships. Our findings draw attention to the importance of collaborative relationships between teacher and computer scientist and the value of creative pedagogies for learning computer programming...

Systematic control of large computer programs

International Nuclear Information System (INIS)

Goedbloed, J.P.; Klieb, L.

1986-07-01

A package of CCL, UPDATE, and FORTRAN procedures is described which facilitates the systematic control and development of large scientific computer programs. The package provides a general tool box for this purpose which contains many conveniences for the systematic administration of files, editing, reformating of line printer output files, etc. In addition, a small number of procedures is devoted to the problem of structured development of a large computer program which is used by a group of scientists. The essence of the method is contained in three procedures N, R, and X for the creation of a new UPDATE program library, its revision, and execution, resp., and a procedure REVISE which provides a joint editor - UPDATE session which combines the advantages of the two systems, viz. speed and rigor. (Auth.)

Revisiting "No Easy Answers": Application of Sally Smith's Methods in the Lab School of Washington High School Program

Science.gov (United States)

Reynolds, Meredith

2010-01-01

The first edition of "No Easy Answers" (Smith, 1995) was published in 1979, thirty years ago. That seminal work is as relevant today as it was when the book first appeared. This article provides a description of how Sally Smith's Academic Club Method is implemented in the High School program of The Lab School of Washington.

Algebraic computing program for studying the gauge theory

International Nuclear Information System (INIS)

Zet, G.

2005-01-01

An algebraic computing program running on Maple V platform is presented. The program is devoted to the study of the gauge theory with an internal Lie group as local symmetry. The physical quantities (gauge potentials, strength tensors, dual tensors etc.) are introduced either as equations in terms of previous defined quantities (tensors), or by manual entry of the component values. The components of the strength tensor and of its dual are obtained with respect to a given metric of the space-time used for describing the gauge theory. We choose a Minkowski space-time endowed with spherical symmetry and give some example of algebraic computing that are adequate for studying electroweak or gravitational interactions. The field equations are also obtained and their solutions are determined using the DEtools facilities of the Maple V computing program. (author)

Real-Time MENTAT programming language and architecture

Science.gov (United States)

Grimshaw, Andrew S.; Silberman, Ami; Liu, Jane W. S.

1989-01-01

Real-time MENTAT, a programming environment designed to simplify the task of programming real-time applications in distributed and parallel environments, is described. It is based on the same data-driven computation model and object-oriented programming paradigm as MENTAT. It provides an easy-to-use mechanism to exploit parallelism, language constructs for the expression and enforcement of timing constraints, and run-time support for scheduling and exciting real-time programs. The real-time MENTAT programming language is an extended C++. The extensions are added to facilitate automatic detection of data flow and generation of data flow graphs, to express the timing constraints of individual granules of computation, and to provide scheduling directives for the runtime system. A high-level view of the real-time MENTAT system architecture and programming language constructs is provided.

A Computer Program Method for Estimation of Entrance Skin Dose for some Individuals Undergoing X-ray Imaging

International Nuclear Information System (INIS)

Taha, T.M.; Allehyani, S.

2012-01-01

A computer program depends on practical measurements of entrance skin dose patients undergoing radiological examinations. Physical parameters such as field size, half value layer, backscatter factor, dose output, focal film distance, focal skin distance, normal operating conditions were taken into consideration for calculation entrance skin dose. It was measured by many techniques such as Thermo-luminescence dosimeters, ionization chambers. TLD technique characterized by high precision and reproducibility of dose measurement is checked by addressing pre-readout annealing, group sorting, dose evaluation, Fifty TLD chips were annealed for 1 hour at 400 degree C followed by 2 h at 100 degree C. After exposure to constant dose from X-ray generator. 0.6 cc Ionization chamber was located at surface of water chest phantom that has dimensions of 40 cm x 40 cm x 20 cm and connected with farmer dose master. Entrance Skin Dose was calculated using the generated software by changing the physical parameters and using the measured output doses. The obtained results were compared with the reference levels of International Atomic Energy Authority. The constructed computer program provides an easy and more practical mean of estimating skin dose even before exposure. They also provide the easiest and cheapest technique can be employed in any entrance skin dose measurement

Computer-controlled CAMAC system for the operation of a neutron diffractometer

Energy Technology Data Exchange (ETDEWEB)

Zwoll, K; Mueller, K D [Kernforschungsanlage Juelich G.m.b.H. (Germany, F.R.). Zentrallabor fuer Elektronik; Will, G [Bonn Univ. (Germany, F.R.). Mineralogisches Inst.

1976-10-01

The paper describes a computer-controlled four-circle diffractometer for the investigation of single crystals by neutron diffraction. The hardware is based on the internationally standardised CAMAC system. This makes the system described here independent of the type of computer used and also largely independent of the mechanical equipment used. The software is written in the interpretative language FOCAL which is easy to learn and ensures high flexibility in programming and thus also in the use of the diffractometer.

Programming for computations Python : a gentle introduction to numerical simulations with Python

CERN Document Server

Linge, Svein

2016-01-01

This book presents computer programming as a key method for solving mathematical problems. There are two versions of the book, one for MATLAB and one for Python. The book was inspired by the Springer book TCSE 6: A Primer on Scientific Programming with Python (by Langtangen), but the style is more accessible and concise, in keeping with the needs of engineering students. The book outlines the shortest possible path from no previous experience with programming to a set of skills that allows the students to write simple programs for solving common mathematical problems with numerical methods in engineering and science courses. The emphasis is on generic algorithms, clean design of programs, use of functions, and automatic tests for verification.

Computer Tutorial Programs in Physics.

Science.gov (United States)

Faughn, Jerry; Kuhn, Karl

1979-01-01

Describes a series of computer tutorial programs which are intended to help college students in introductory physics courses. Information about these programs, which are either calculus or algebra-trig based, is presented. (HM)

Demand side management scheme in smart grid with cloud computing approach using stochastic dynamic programming

Directory of Open Access Journals (Sweden)

S. Sofana Reka

2016-09-01

Full Text Available This paper proposes a cloud computing framework in smart grid environment by creating small integrated energy hub supporting real time computing for handling huge storage of data. A stochastic programming approach model is developed with cloud computing scheme for effective demand side management (DSM in smart grid. Simulation results are obtained using GUI interface and Gurobi optimizer in Matlab in order to reduce the electricity demand by creating energy networks in a smart hub approach.

Computer programs in accelerator physics

International Nuclear Information System (INIS)

Keil, E.

1984-01-01

Three areas of accelerator physics are discussed in which computer programs have been applied with much success: i) single-particle beam dynamics in circular machines, i.e. the design and matching of machine lattices; ii) computations of electromagnetic fields in RF cavities and similar objects, useful for the design of RF cavities and for the calculation of wake fields; iii) simulation of betatron and synchrotron oscillations in a machine with non-linear elements, e.g. sextupoles, and of bunch lengthening due to longitudinal wake fields. (orig.)

A computer program for controlling a university radioactive material inventory: From confusion to computer to control

International Nuclear Information System (INIS)

Robb, D.B.; Riches, C.G.; O'Brian, M.J.; Riordan, F.J.

1984-01-01

The University of Washington is a large user of radioactive material. Over 250 authorized programs are working in over 600 labs with nearly 3500 orders of radioactive material per year. The state license sets limits on the total amount of material on campus. There are also limits on sewer disposal. To meet these needs it is necessary to know the amount of material on campus at any time. A computer program was developed which covered many aspects of the radiation safety record needs including inventory control. Inventory is now managed by tracking each order from purchase to disposal. A screen menu as part of the interactive program allows immediate and detailed information about the inventory at time of purchase approval and delivery. Because of this system our knowledge and control of radionuclide work on campus has increased dramatically. A description of how this system is used during ordering, delivery and disposal will be given. Details on the methods to check limits are included along with a summary of the reports made possible by the current data files

New FORTRAN computer programs to acquire and process isotopic mass-spectrometric data

International Nuclear Information System (INIS)

Smith, D.H.

1982-08-01

The computer programs described in New Computer Programs to Acquire and Process Isotopic Mass Spectrometric Data have been revised. This report describes in some detail the operation of these programs, which acquire and process isotopic mass spectrometric data. Both functional and overall design aspects are addressed. The three basic program units - file manipulation, data acquisition, and data processing - are discussed in turn. Step-by-step instructions are included where appropriate, and each subsection is described in enough detail to give a clear picture of its function. Organization of file structure, which is central to the entire concept, is extensively discussed with the help of numerous tables. Appendices contain flow charts and outline file structure to help a programmer unfamiliar with the programs to alter them with a minimum of lost time

A nonproprietary, nonsecret program for calculating Stirling cryocoolers

Science.gov (United States)

Martini, W. R.

1985-01-01

A design program for an integrated Stirling cycle cryocooler was written on an IBM-PC computer. The program is easy to use and shows the trends and itemizes the losses. The calculated results were compared with some measured performance values. The program predicts somewhat optimistic performance and needs to be calibrated more with experimental measurements. Adding a multiplier to the friction factor can bring the calculated rsults in line with the limited test results so far available. The program is offered as a good framework on which to build a truly useful design program for all types of cryocoolers.

A Study of the Programming Languages Used in Information Systems and in Computer Science Curricula

Science.gov (United States)

Russell, Jack; Russell, Barbara; Pollacia, Lissa F.; Tastle, William J.

2010-01-01

This paper researches the computer languages taught in the first, second and third programming courses in Computer Information Systems (CIS), Management Information Systems (MIS or IS) curricula as well as in Computer Science (CS) and Information Technology (IT) curricula. Instructors teaching the first course in programming within a four year…

Computational chemistry with transputers: A direct SCF program

International Nuclear Information System (INIS)

Wedig, U.; Burkhardt, A.; Schnering, H.G. von

1989-01-01

By using transputers it is possible to build up networks of parallel processors with varying topology. Due to the architecture of the processors it is appropriate to use the MIMD (multiple instruction multiple data) concept of parallel computing. The most suitable programming language is OCCAM. We investigate the use of transputer networks in computational chemistry, starting with the direct SCF method. The most time consuming step, the calculation of the two electron integrals is executed parallelly. Each node in the network calculates whole batches of integrals. The main program is written in OCCAM. For some large-scale arithmetic processes running on a single node, however, we used FORTRAN subroutines out of standard ab-initio programs to reduce the programming effort. Test calculations show, that the integral calculation step can be parallelled very efficiently. We observed a speed-up of almost 8 using eight network processors. Even in consideration of the scalar part of the SCF iteration, the speed-up is not less than 7.1. (orig.)

Comparison of the applicability of commercial computer programs to study the thermodynamic stability of metal oxides

International Nuclear Information System (INIS)

Koukkari, P.; Olin, M.; Laitinen, T.; Sippola, H.

1999-04-01

The oxide films formed on primary circuit surfaces incorporate radioactive species from the coolant and influence different corrosion phenomena in nuclear power plants. One approach to improve the understanding on the formation and properties of these oxide films is to evaluate their thermodynamic stability. The aim of this work was to compare and demonstrate the applicability of different commercial thermodynamic computer programs to model the deposition of oxides containing iron, chromium and/or nickel in various nuclear power plant environments. The programs considered in this evaluation comprised the EQ3/6 program and a product group including such products as ChemSage, HSC (including SOLGASMIX and GIBBS), H+PLUS and ChemSheet. In the group the transfer of data between different products is relatively easy. The goal was to find out which programs can be applied to evaluate the stability of oxide films, but not to assess the absolute accuracy of the calculations. The evaluation was done by means of applying the programs to calculate the stability of pure and mixed oxides of iron, nickel and chromium on stainless steel both in WWER and BWR conditions at different temperatures and coolant compositions. The comparison showed that EQ3/6 is suitable for most thermodynamic calculations. EQ3/6 can be characterised as a professional tool, for which no commercial training is available. ChemSage is a versatile and reliable program, which can be well used together with HSC and H+PLUS. ChemSage is mainly a professional tool, while HSC is easier to operate by an occasional user. Commercial training and support is available for both ChemSage and HSC. ChemSheet has been designed to utilise the properties of ChemSage in a user-friendly spreadsheet environment. All the products tested calculate thermodynamic equilibrium. Thus they are suitable to characterise such conditions in which the formation of a certain phase is or becomes possible. On the other hand, the modelling of the

A Drawing and Multi-Representational Computer Environment for Beginners' Learning of Programming Using C: Design and Pilot Formative Evaluation

Science.gov (United States)

Kordaki, Maria

2010-01-01

This paper presents both the design and the pilot formative evaluation study of a computer-based problem-solving environment (named LECGO: Learning Environment for programming using C using Geometrical Objects) for the learning of computer programming using C by beginners. In its design, constructivist and social learning theories were taken into…

English made easy

CERN Document Server

Crichton, Jonathan

2013-01-01

This is a fun and user–friendly way to learn English English Made Easy is a breakthrough in English language learning—imaginatively exploiting how pictures and text can work together to create understanding and help learners learn more productively. It gives learners easy access to the vocabulary, grammar and functions of English as it is actually used in a comprehensive range of social situations. Self–guided students and classroom learners alike will be delighted by the way they are helped to progress easily from one unit to the next, using a combination of pictures and text to discover for themselves how English works. The pictorial method used in this book is based on a thorough understanding of language structure and how language is successfully learned.English Made Easy, Volume 1 consists of a total of 20 units arranged in groups of five. The first four units presents language and provide learners the opportunities to practice as they learn. The first page of each unit has a list of all the word...

English made easy

CERN Document Server

Crichton, Jonathan

2013-01-01

This is a fun and user–friendly way to learn EnglishEnglish Made Easy is a breakthrough in English language learning—imaginatively exploiting how pictures and text can work together to create understanding and help learners learn more productively. It gives learners easy access to the vocabulary, grammar and functions of English as it is actually used in a comprehensive range of social situations. Self–guided students and classroom learners alike will be delighted by the way they are helped to progress easily from one unit to the next, using a combination of pictures and text to discover for themselves how English works. The pictorial method used in this book is based on a thorough understanding of language structure and how language is successfully learned.English Made Easy, Volume 2 consists of a total of 20 units arranged in groups of five. The first four units presents language and provide learners the opportunities to practice as they learn. The first page of each unit has a list of all the words...

The Computational Physics Program of the national MFE Computer Center

International Nuclear Information System (INIS)

Mirin, A.A.

1989-01-01

Since June 1974, the MFE Computer Center has been engaged in a significant computational physics effort. The principal objective of the Computational Physics Group is to develop advanced numerical models for the investigation of plasma phenomena and the simulation of present and future magnetic confinement devices. Another major objective of the group is to develop efficient algorithms and programming techniques for current and future generations of supercomputers. The Computational Physics Group has been involved in several areas of fusion research. One main area is the application of Fokker-Planck/quasilinear codes to tokamaks. Another major area is the investigation of resistive magnetohydrodynamics in three dimensions, with applications to tokamaks and compact toroids. A third area is the investigation of kinetic instabilities using a 3-D particle code; this work is often coupled with the task of numerically generating equilibria which model experimental devices. Ways to apply statistical closure approximations to study tokamak-edge plasma turbulence have been under examination, with the hope of being able to explain anomalous transport. Also, we are collaborating in an international effort to evaluate fully three-dimensional linear stability of toroidal devices. In addition to these computational physics studies, the group has developed a number of linear systems solvers for general classes of physics problems and has been making a major effort at ascertaining how to efficiently utilize multiprocessor computers. A summary of these programs are included in this paper. 6 tabs

Functional Programming in Computer Science

Energy Technology Data Exchange (ETDEWEB)

Anderson, Loren James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Davis, Marion Kei [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-01-19

We explore functional programming through a 16-week internship at Los Alamos National Laboratory. Functional programming is a branch of computer science that has exploded in popularity over the past decade due to its high-level syntax, ease of parallelization, and abundant applications. First, we summarize functional programming by listing the advantages of functional programming languages over the usual imperative languages, and we introduce the concept of parsing. Second, we discuss the importance of lambda calculus in the theory of functional programming. Lambda calculus was invented by Alonzo Church in the 1930s to formalize the concept of effective computability, and every functional language is essentially some implementation of lambda calculus. Finally, we display the lasting products of the internship: additions to a compiler and runtime system for the pure functional language STG, including both a set of tests that indicate the validity of updates to the compiler and a compiler pass that checks for illegal instances of duplicate names.

Determining Balıkesir’s Energy Potential Using a Regression Analysis Computer Program

Directory of Open Access Journals (Sweden)

Bedri Yüksel

2014-01-01

Full Text Available Solar power and wind energy are used concurrently during specific periods, while at other times only the more efficient is used, and hybrid systems make this possible. When establishing a hybrid system, the extent to which these two energy sources support each other needs to be taken into account. This paper is a study of the effects of wind speed, insolation levels, and the meteorological parameters of temperature and humidity on the energy potential in Balıkesir, in the Marmara region of Turkey. The relationship between the parameters was studied using a multiple linear regression method. Using a designed-for-purpose computer program, two different regression equations were derived, with wind speed being the dependent variable in the first and insolation levels in the second. The regression equations yielded accurate results. The computer program allowed for the rapid calculation of different acceptance rates. The results of the statistical analysis proved the reliability of the equations. An estimate of identified meteorological parameters and unknown parameters could be produced with a specified precision by using the regression analysis method. The regression equations also worked for the evaluation of energy potential.

Comparison and verification of two computer programs used to analyze ventilation systems under accident conditions

International Nuclear Information System (INIS)

Hartig, S.H.; Wurz, D.E.; Arnitz, T.; Ruedinger, V.

1985-01-01

Two computer codes, TVENT and EVENT, which were developed at the Los Alamos National Laboratory (LANL) for the analysis of ventilation systems, have been modified to model air-cleaning systems that include active components with time-dependent flow-resistance characteristics. With both modified programs, fluid-dynamic transients were calculated for a test facility used to simulate accident conditions in air-cleaning systems. Experiments were performed in the test facility whereby flow and pressure transients were generated with the help of two quick-actuating air-stream control valves. The numerical calculations are compared with the test results. Although EVENT makes use of a more complex theoretical flow model than TVENT, the numerical simulations of both codes were found to be very similar for the flow conditions studied and to closely follow the experimental results

Motivating Programming: Using Storytelling to Make Computer Programming Attractive to Middle School Girls

Science.gov (United States)

2006-11-01

classrooms at more than 100 universities and 100 high schools across the United States. Prentice-Hall believes that number will continue to grow ...New Methods One of the challenges in learning to program is in learning how to structure programs so that as they grow in length the programmer can...horse, a Pegasus, and a unicorn . Our testers struggled in creating stories with this Story Kit, probably in large part due to its incompleteness

Computer programs in BASIC language for graphite furnace atomic absorption using the method of additions. Part 1. Operating instructions

International Nuclear Information System (INIS)

Boyle, W.G. Jr.; Ryan, D.P.

1979-01-01

These instructions describe how to use BASIC language programs to process data from atomic absorption spectrophotometers using the graphite furnace and the method of additions calibration technique. The instructions cover loading the programs, responding to computer prompts, choosing among various options for processing the data, performing operations with an automatic sampler, and producing reports. How the programs interact with each other is also explained. Examples of computer/operator dialogue are presented for typical cases. In addition, a concise set of operating instructions is included as an appendix

Mathematica: A System of Computer Programs

OpenAIRE

Maiti, Santanu K.

2006-01-01

Starting from the basic level of mathematica here we illustrate how to use a mathematica notebook and write a program in the notebook. Next, we investigate elaborately the way of linking of external programs with mathematica, so-called the mathlink operation. Using this technique we can run very tedious jobs quite efficiently, and the operations become extremely fast. Sometimes it is quite desirable to run jobs in background of a computer which can take considerable amount of time to finish, ...

A remote sensing computer-assisted learning tool developed using the unified modeling language

Science.gov (United States)

Friedrich, J.; Karslioglu, M. O.

The goal of this work has been to create an easy-to-use and simple-to-make learning tool for remote sensing at an introductory level. Many students struggle to comprehend what seems to be a very basic knowledge of digital images, image processing and image arithmetic, for example. Because professional programs are generally too complex and overwhelming for beginners and often not tailored to the specific needs of a course regarding functionality, a computer-assisted learning (CAL) program was developed based on the unified modeling language (UML), the present standard for object-oriented (OO) system development. A major advantage of this approach is an easier transition from modeling to coding of such an application, if modern UML tools are being used. After introducing the constructed UML model, its implementation is briefly described followed by a series of learning exercises. They illustrate how the resulting CAL tool supports students taking an introductory course in remote sensing at the author's institution.

The SIMRAND 1 computer program: Simulation of research and development projects

Science.gov (United States)

Miles, R. F., Jr.

1986-01-01

The SIMRAND I Computer Program (Version 5.0 x 0.3) written in Microsoft FORTRAN for the IBM PC microcomputer and its compatibles is described. The SIMRAND I Computer Program comprises eleven modules-a main routine and ten subroutines. Two additional files are used at compile time; one inserts the system or task equations into the source code, while the other inserts the dimension statements and common blocks. The SIMRAND I Computer Program can be run on most microcomputers or mainframe computers with only minor modifications to the computer code.

Detecting Silent Data Corruptions in Aerospace-Based Computing Using Program Invariants

Directory of Open Access Journals (Sweden)

Junchi Ma

2016-01-01

Full Text Available Soft error caused by single event upset has been a severe challenge to aerospace-based computing. Silent data corruption (SDC is one of the results incurred by soft error. SDC occurs when a program generates erroneous output with no indications. SDC is the most insidious type of results and very difficult to detect. To address this problem, we design and implement an invariant-based system called Radish. Invariants describe certain properties of a program; for example, the value of a variable equals a constant. Radish first extracts invariants at key program points and converts invariants into assertions. It then hardens the program by inserting the assertions into the source code. When a soft error occurs, assertions will be found to be false at run time and warn the users of soft error. To increase the coverage of SDC, we further propose an extension of Radish, named Radish_D, which applies software-based instruction duplication mechanism to protect the uncovered code sections. Experiments using architectural fault injections show that Radish achieves high SDC coverage with very low overhead. Furthermore, Radish_D provides higher SDC coverage than that of either Radish or pure instruction duplication.

Fixed point algebras for easy quantum groups

DEFF Research Database (Denmark)

Gabriel, Olivier; Weber, Moritz

2016-01-01

Compact matrix quantum groups act naturally on Cuntz algebras. The first author isolated certain conditions under which the fixed point algebras under this action are Kirchberg algebras. Hence they are completely determined by their K-groups. Building on prior work by the second author,we prove...... that free easy quantum groups satisfy these conditions and we compute the K-groups of their fixed point algebras in a general form. We then turn to examples such as the quantum permutation group S+ n,the free orthogonal quantum group O+ n and the quantum reflection groups Hs+ n. Our fixed point......-algebra construction provides concrete examples of free actions of free orthogonal easy quantum groups,which are related to Hopf-Galois extensions....

Development of computer program for safety of nuclear power plant against tsunami

International Nuclear Information System (INIS)

Jin, S. B.; Choi, K. R.; Lee, S. K.; Cho, Y. S.

2001-01-01

The main objective of this study is the development of a computer program to check the safety of nuclear power plants along the coastline of the Korean Peninsula. The computer program describes the propagation and associated run-up process of tsunamis by solving linear and nonlinear shallow-water equations with finite difference methods. The computer program has been applied to several ideal and simplified problems. Obtained numerical solutions are compared to existing and available solutions and measurements. A very good agreement between numerical solutions and existing measurement is observed. The computer program developed in this study can be to check the safety analysis of nuclear power plants against tsunamis. The program can also be used to study the propagation of tsunamis for a long distance, and associated run-up and run-down process along a shoreline. Furthermore, the computer program can be used to provide the proper design criteria of coastal facilities and structures

PEDIC - A COMPUTER PROGRAM TO ESTIMATE THE EFFECT OF EVACUATION ON POPULATION EXPOSURE FOLLOWING ACUTE RADIONUCLIDE RELEASES TO THE ATOMSPHERE

Energy Technology Data Exchange (ETDEWEB)

Strenge, D. L.; Peloquin, R. A.

1981-01-01

The computer program PEDIC is described for estimation of the effect of evacuation on population exposure. The program uses joint frequency, annual average meteorological data and a simple population evacuation model to estimate exposure reduction due to movement of people away from radioactive plumes following an acute release of activity. Atmospheric dispersion is based on a sector averaged Gaussian model with consideration of plume rise and building wake effects. Appendices to the report provide details of the computer program design, a program listing, input card preparation instructions and sample problems.

Adapting high-level language programs for parallel processing using data flow

Science.gov (United States)

Standley, Hilda M.

1988-01-01

EASY-FLOW, a very high-level data flow language, is introduced for the purpose of adapting programs written in a conventional high-level language to a parallel environment. The level of parallelism provided is of the large-grained variety in which parallel activities take place between subprograms or processes. A program written in EASY-FLOW is a set of subprogram calls as units, structured by iteration, branching, and distribution constructs. A data flow graph may be deduced from an EASY-FLOW program.

The Caltech Concurrent Computation Program - Project description

Science.gov (United States)

Fox, G.; Otto, S.; Lyzenga, G.; Rogstad, D.

1985-01-01

The Caltech Concurrent Computation Program wwhich studies basic issues in computational science is described. The research builds on initial work where novel concurrent hardware, the necessary systems software to use it and twenty significant scientific implementations running on the initial 32, 64, and 128 node hypercube machines have been constructed. A major goal of the program will be to extend this work into new disciplines and more complex algorithms including general packages that decompose arbitrary problems in major application areas. New high-performance concurrent processors with up to 1024-nodes, over a gigabyte of memory and multigigaflop performance are being constructed. The implementations cover a wide range of problems in areas such as high energy and astrophysics, condensed matter, chemical reactions, plasma physics, applied mathematics, geophysics, simulation, CAD for VLSI, graphics and image processing. The products of the research program include the concurrent algorithms, hardware, systems software, and complete program implementations.

CRYOCOL a computer program to calculate the cryogenic distillation of hydrogen isotopes

International Nuclear Information System (INIS)

Douglas, S.R.

1993-02-01

This report describes the computer model and mathematical method coded into the AECL Research computer program CRYOCOL. The purpose of CRYOCOL is to calculate the separation of hydrogen isotopes by cryogenic distillation. (Author)

Process-Oriented Parallel Programming with an Application to Data-Intensive Computing

OpenAIRE

Givelberg, Edward

2014-01-01

We introduce process-oriented programming as a natural extension of object-oriented programming for parallel computing. It is based on the observation that every class of an object-oriented language can be instantiated as a process, accessible via a remote pointer. The introduction of process pointers requires no syntax extension, identifies processes with programming objects, and enables processes to exchange information simply by executing remote methods. Process-oriented programming is a h...

DABIE: a data banking system of integral experiments for reactor core characteristics computer codes

International Nuclear Information System (INIS)

Matsumoto, Kiyoshi; Naito, Yoshitaka; Ohkubo, Shuji; Aoyanagi, Hideo.

1987-05-01

A data banking system of integral experiments for reactor core characteristics computer codes, DABIE, has been developed to lighten the burden on searching so many documents to obtain experiment data required for verification of reactor core characteristics computer code. This data banking system, DABIE, has capabilities of systematic classification, registration and easy retrieval of experiment data. DABIE consists of data bank and supporting programs. Supporting programs are data registration program, data reference program and maintenance program. The system is designed so that user can easily register information of experiment systems including figures as well as geometry data and measured data or obtain those data through TSS terminal interactively. This manual describes the system structure, how-to-use and sample uses of this code system. (author)

Newnes circuit calculations pocket book with computer programs

CERN Document Server

Davies, Thomas J

2013-01-01

Newnes Circuit Calculations Pocket Book: With Computer Programs presents equations, examples, and problems in circuit calculations. The text includes 300 computer programs that help solve the problems presented. The book is comprised of 20 chapters that tackle different aspects of circuit calculation. The coverage of the text includes dc voltage, dc circuits, and network theorems. The book also covers oscillators, phasors, and transformers. The text will be useful to electrical engineers and other professionals whose work involves electronic circuitry.

Use of computer programs STLK1 and STWT1 for analysis of stream-aquifer hydraulic interaction

Science.gov (United States)

Desimone, Leslie A.; Barlow, Paul M.

1999-01-01

Quantifying the hydraulic interaction of aquifers and streams is important in the analysis of stream base fow, flood-wave effects, and contaminant transport between surface- and ground-water systems. This report describes the use of two computer programs, STLK1 and STWT1, to analyze the hydraulic interaction of streams with confined, leaky, and water-table aquifers during periods of stream-stage fuctuations and uniform, areal recharge. The computer programs are based on analytical solutions to the ground-water-flow equation in stream-aquifer settings and calculate ground-water levels, seepage rates across the stream-aquifer boundary, and bank storage that result from arbitrarily varying stream stage or recharge. Analysis of idealized, hypothetical stream-aquifer systems is used to show how aquifer type, aquifer boundaries, and aquifer and streambank hydraulic properties affect aquifer response to stresses. Published data from alluvial and stratifed-drift aquifers in Kentucky, Massachusetts, and Iowa are used to demonstrate application of the programs to field settings. Analytical models of these three stream-aquifer systems are developed on the basis of available hydrogeologic information. Stream-stage fluctuations and recharge are applied to the systems as hydraulic stresses. The models are calibrated by matching ground-water levels calculated with computer program STLK1 or STWT1 to measured ground-water levels. The analytical models are used to estimate hydraulic properties of the aquifer, aquitard, and streambank; to evaluate hydrologic conditions in the aquifer; and to estimate seepage rates and bank-storage volumes resulting from flood waves and recharge. Analysis of field examples demonstrates the accuracy and limitations of the analytical solutions and programs when applied to actual ground-water systems and the potential uses of the analytical methods as alternatives to numerical modeling for quantifying stream-aquifer interactions.

An easy and low cost option for economic statistical process control ...

African Journals Online (AJOL)

An easy and low cost option for economic statistical process control using Excel. ... in both economic and economic statistical designs of the X-control chart. ... in this paper and the numerical examples illustrated are executed on this program.

A REDUCE program for symbolic computation of Puiseux expansions

International Nuclear Information System (INIS)

Gerdt, V.P.; Tiller, P.

1991-01-01

The program is described for computation of Puiseux expansions of algebraic functions. The Newton diagram method is used for construction of initial coefficients of all the Puiseux series at the given point. The program is written in computer algebra language Reduce. Some illustrative examples are given. 20 refs

Radiation and pregnancy: a self-teaching computer program

International Nuclear Information System (INIS)

Kumar, Pratik; Rehani, M.M.

1994-01-01

Two self-interacting computer programs have been developed. The first program which consists of fifteen topics apprises the users with broad spectrum of radiation risks to the unborn during pregnancy and the status of various views in this regard. Another program estimates the dose to uterus in sixteen radiological examinations depending upon the radiographic parameters used. The dose to uterus and hence to the fetus calculated by computer program in different radiographic views have been found to be in agreement with that reported in NRPB-R200 survey report. The two programs combined provide a better understanding of the rather confusing situation regarding dilemma about termination of pregnancy following inadvertent radiation exposure, apprehension about radiation effect in the minds of prescribing doctor and patients, dose estimation and advice to pregnant workers and like. (author). 10 refs

ITAC, an insider threat assessment computer program

International Nuclear Information System (INIS)

Eggers, R.F.; Giese, E.W.

1988-01-01

The insider threat assessment computer program, ITAC, is used to evaluate the vulnerability of nuclear material processing facilities to theft of special nuclear material by one or more authorized insider adversaries. The program includes two main parts: one is used to determine the timeliness of nuclear material accounting tests for loss of special nuclear material, and the other determines pathway aggregate detection probabilities for physical protection systems and material control procedures that could detect the theft. Useful features of ITAC include its ability to (1) evaluate and quantify the timeliness of material accounting tests, (2) analyze branching systems of physical pathways and adversary strategies, (3) analyze trickle or abrupt theft situations for combinations of insiders, (4) accept input probabilities and times in the form of ranges rather than discrete points, and (5) simulate input data using Monte Carlo methods to produce statistically distributed aggregate delay times and detection probabilities. The ITAC program was developed by the Security Applications Center of Westinghouse Hanford Comapny and Boeing Computer Services, Richland, WA

Computer program user's manual for FIREFINDER digital topographic data verification library dubbing system

Science.gov (United States)

Ceres, M.; Heselton, L. R., III

1981-11-01

This manual describes the computer programs for the FIREFINDER Digital Topographic Data Verification-Library-Dubbing System (FFDTDVLDS), and will assist in the maintenance of these programs. The manual contains detailed flow diagrams and associated descriptions for each computer program routine and subroutine. Complete computer program listings are also included. This information should be used when changes are made in the computer programs. The operating system has been designed to minimize operator intervention.

Computer Presentation Programs and Teaching Research Methodologies

Directory of Open Access Journals (Sweden)

Vahid Motamedi

2015-05-01

Full Text Available Supplementing traditional chalk and board instruction with computer delivery has been viewed positively by students who have reported increased understanding and more interaction with the instructor when computer presentations are used in the classroom. Some problems contributing to student errors while taking class notes might be transcription of numbers to the board, and handwriting of the instructor can be resolved in careful construction of computer presentations. The use of computer presentation programs promises to increase the effectiveness of learning by making content more readily available, by reducing the cost and effort of producing quality content, and by allowing content to be more easily shared. This paper describes how problems can be overcome by using presentation packages for instruction.

The RANDOM computer program: A linear congruential random number generator

Science.gov (United States)

Miles, R. F., Jr.

1986-01-01

The RANDOM Computer Program is a FORTRAN program for generating random number sequences and testing linear congruential random number generators (LCGs). The linear congruential form of random number generator is discussed, and the selection of parameters of an LCG for a microcomputer described. This document describes the following: (1) The RANDOM Computer Program; (2) RANDOM.MOD, the computer code needed to implement an LCG in a FORTRAN program; and (3) The RANCYCLE and the ARITH Computer Programs that provide computational assistance in the selection of parameters for an LCG. The RANDOM, RANCYCLE, and ARITH Computer Programs are written in Microsoft FORTRAN for the IBM PC microcomputer and its compatibles. With only minor modifications, the RANDOM Computer Program and its LCG can be run on most micromputers or mainframe computers.

Computations of concentration of radon and its decay products against time. Computer program; Obliczanie koncentracji radonu i jego produktow rozpadu w funkcji czasu. Program komputerowy

Energy Technology Data Exchange (ETDEWEB)

Machaj, B. [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

1996-12-31

This research is aimed to develop a device for continuous monitoring of radon in the air, by measuring alpha activity of radon and its short lived decay products. The influence of alpha activity variation of radon and its daughters on the measured results is of importance and requires a knowledge of this variation with time. Employing the measurement of alpha radiation of radon and of its short lived decay products, require knowledge of radon concentration variation and its decay products against the time. A computer program in Turbo Pascal language was therefore developed performing the computations employing the known relations involved, the program being adapted for IBM PC computers. The presented program enables computation of activity of {sup 222}Rn and its daughter products: {sup 218}Po, {sup 214}Pb, {sup 214}Bi and {sup 214}Po every 1 min within the period of 0-255 min for any state of radiation equilibrium between the radon and its daughter products. The program permits also to compute alpha activity of {sup 222}Rn + {sup 218}Po + {sup 214}Po against time and the total alpha activity at selected interval of time. The results of computations are stored on the computer hard disk in ASCII format and are used a graphic program e.g. by DrawPerfect program to make diagrams. Equations employed for computation of the alpha activity of radon and its decay products as well as the description of program functions are given. (author). 2 refs, 4 figs.

Astronomy with a home computer

CERN Document Server

Monks, Neale

2005-01-01

Here is a one-volume guide to just about everything computer-related for amateur astronomers! Today's amateur astronomy is inextricably linked to personal computers. Computer-controlled "go-to" telescopes are inexpensive. CCD and webcam imaging make intensive use of the technology for capturing and processing images. Planetarium software provides information and an easy interface for telescopes. The Internet offers links to other astronomers, information, and software. The list goes on and on. Find out here how to choose the best planetarium program: are commercial versions really better than freeware? Learn how to optimise a go-to telescope, or connect it to a lap-top. Discover how to choose the best webcam and use it with your telescope. Create a mosaic of the Moon, or high-resolution images of the planets... Astronomy with a Home Computer is designed for every amateur astronomer who owns a home computer, whether it is running Microsoft Windows, Mac O/S or Linux. It doesn't matter what kind of telescope you...

HUDU: The Hanford Unified Dose Utility computer code

International Nuclear Information System (INIS)

Scherpelz, R.I.

1991-02-01

The Hanford Unified Dose Utility (HUDU) computer program was developed to provide rapid initial assessment of radiological emergency situations. The HUDU code uses a straight-line Gaussian atmospheric dispersion model to estimate the transport of radionuclides released from an accident site. For dose points on the plume centerline, it calculates internal doses due to inhalation and external doses due to exposure to the plume. The program incorporates a number of features unique to the Hanford Site (operated by the US Department of Energy), including a library of source terms derived from various facilities' safety analysis reports. The HUDU code was designed to run on an IBM-PC or compatible personal computer. The user interface was designed for fast and easy operation with minimal user training. The theoretical basis and mathematical models used in the HUDU computer code are described, as are the computer code itself and the data libraries used. Detailed instructions for operating the code are also included. Appendices to the report contain descriptions of the program modules, listings of HUDU's data library, and descriptions of the verification tests that were run as part of the code development. 14 refs., 19 figs., 2 tabs

Computing Programs for Determining Traffic Flows from Roundabouts

Science.gov (United States)

Boroiu, A. A.; Tabacu, I.; Ene, A.; Neagu, E.; Boroiu, A.

2017-10-01

For modelling road traffic at the level of a road network it is necessary to specify the flows of all traffic currents at each intersection. These data can be obtained by direct measurements at the traffic light intersections, but in the case of a roundabout this is not possible directly and the literature as well as the traffic modelling software doesn’t offer ways to solve this issue. Two sets of formulas are proposed by which all traffic flows from the roundabouts with 3 or 4 arms are calculated based on the streams that can be measured. The objective of this paper is to develop computational programs to operate with these formulas. For each of the two sets of analytical relations, a computational program was developed in the Java operating language. The obtained results fully confirm the applicability of the calculation programs. The final stage for capitalizing these programs will be to make them web pages in HTML format, so that they can be accessed and used on the Internet. The achievements presented in this paper are an important step to provide a necessary tool for traffic modelling because these computational programs can be easily integrated into specialized software.

E-Block: A Tangible Programming Tool with Graphical Blocks

Directory of Open Access Journals (Sweden)

Danli Wang

2013-01-01

Full Text Available This paper designs a tangible programming tool, E-Block, for children aged 5 to 9 to experience the preliminary understanding of programming by building blocks. With embedded artificial intelligence, the tool defines the programming blocks with the sensors as the input and enables children to write programs to complete the tasks in the computer. The symbol on the programming block's surface is used to help children understanding the function of each block. The sequence information is transferred to computer by microcomputers and then translated into semantic information. The system applies wireless and infrared technologies and provides user with feedbacks on both screen and programming blocks. Preliminary user studies using observation and user interview methods are shown for E-Block's prototype. The test results prove that E-Block is attractive to children and easy to learn and use. The project also highlights potential advantages of using single chip microcomputer (SCM technology to develop tangible programming tools for children.

Increased pregnancy rate with use of the Clearblue Easy Fertility Monitor.

Science.gov (United States)

Robinson, Janet E; Wakelin, Melanie; Ellis, Jayne E

2007-02-01

To determine the effect on pregnancy rates through use of the Clearblue Easy Fertility Monitor (CEFM) in women trying to conceive. Prospective study, in which volunteers were randomly assigned either to use or not to use the CEFM. All participants could also use other aids to conception. Data were self-reported by volunteers using daily diaries, supplied and collected by mail. Home use, under conditions normally experienced by over-the-counter purchasers of the marketed device. Women who were trying to conceive; 653 (CEFM 305, control 348) provided evaluable information. CEFM was used for two cycles. Cumulative pregnancy rates over two cycles of use. The cumulative pregnancy rate for 2 cycles was significantly higher in the CEFM group (22.7%) compared with the control group (14.4%). More women who had been trying to conceive for conceive for >6 months (odds ratio: 2.67). Previous pregnancy and younger age of partners were also significant prognostic factors, but use of other aids to conception was not. After adjustment for other factors, CEFM use remained a significant factor affecting the chance of conceiving within two cycles (odds ratio: 1.89). CEFM users found the device to be easy/very easy to use (90%) and convenient/very convenient (80%). Use of the CEFM increases the likelihood of getting pregnant during the first two cycles of use compared with its nonuse, in women who had been trying to conceive for up to 2 years.

Computing, Information, and Communications Technology (CICT) Program Overview

Science.gov (United States)

VanDalsem, William R.

2003-01-01

The Computing, Information and Communications Technology (CICT) Program's goal is to enable NASA's Scientific Research, Space Exploration, and Aerospace Technology Missions with greater mission assurance, for less cost, with increased science return through the development and use of advanced computing, information and communication technologies

Computer program for diagnostic X-ray exposure conversion

International Nuclear Information System (INIS)

Lewis, S.L.

1984-01-01

Presented is a computer program designed to convert any given set of diagnostic X-ray exposure factors sequentially into another, yielding either an equivalent photographic density or one increased or decreased by a specifiable proportion. In addition to containing the wherewithal with which to manipulate a set of exposure factors, the facility to print hard (paper) copy is included enabling the results to be pasted into a notebook and used at any time. This program was originally written as an investigative exercise into examining the potential use of computers for practical radiographic purposes as conventionally encountered. At the same time, its possible use as an educational tool was borne in mind. To these ends, the current version of this program may be used as a means whereby exposure factors used in a diagnostic department may be altered to suit a particular requirement or may be used in the school as a mathematical model to describe the behaviour of exposure factors under manipulation without patient exposure. (author)

From experiment to design -- Fault characterization and detection in parallel computer systems using computational accelerators

Science.gov (United States)

Yim, Keun Soo

This dissertation summarizes experimental validation and co-design studies conducted to optimize the fault detection capabilities and overheads in hybrid computer systems (e.g., using CPUs and Graphics Processing Units, or GPUs), and consequently to improve the scalability of parallel computer systems using computational accelerators. The experimental validation studies were conducted to help us understand the failure characteristics of CPU-GPU hybrid computer systems under various types of hardware faults. The main characterization targets were faults that are difficult to detect and/or recover from, e.g., faults that cause long latency failures (Ch. 3), faults in dynamically allocated resources (Ch. 4), faults in GPUs (Ch. 5), faults in MPI programs (Ch. 6), and microarchitecture-level faults with specific timing features (Ch. 7). The co-design studies were based on the characterization results. One of the co-designed systems has a set of source-to-source translators that customize and strategically place error detectors in the source code of target GPU programs (Ch. 5). Another co-designed system uses an extension card to learn the normal behavioral and semantic execution patterns of message-passing processes executing on CPUs, and to detect abnormal behaviors of those parallel processes (Ch. 6). The third co-designed system is a co-processor that has a set of new instructions in order to support software-implemented fault detection techniques (Ch. 7). The work described in this dissertation gains more importance because heterogeneous processors have become an essential component of state-of-the-art supercomputers. GPUs were used in three of the five fastest supercomputers that were operating in 2011. Our work included comprehensive fault characterization studies in CPU-GPU hybrid computers. In CPUs, we monitored the target systems for a long period of time after injecting faults (a temporally comprehensive experiment), and injected faults into various types of

Energy consumption program: A computer model simulating energy loads in buildings

Science.gov (United States)

Stoller, F. W.; Lansing, F. L.; Chai, V. W.; Higgins, S.

1978-01-01

The JPL energy consumption computer program developed as a useful tool in the on-going building modification studies in the DSN energy conservation project is described. The program simulates building heating and cooling loads and computes thermal and electric energy consumption and cost. The accuracy of computations are not sacrificed, however, since the results lie within + or - 10 percent margin compared to those read from energy meters. The program is carefully structured to reduce both user's time and running cost by asking minimum information from the user and reducing many internal time-consuming computational loops. Many unique features were added to handle two-level electronics control rooms not found in any other program.

An Easy-to-Use Airborne LiDAR Data Filtering Method Based on Cloth Simulation

Directory of Open Access Journals (Sweden)

Wuming Zhang

2016-06-01

Full Text Available Separating point clouds into ground and non-ground measurements is an essential step to generate digital terrain models (DTMs from airborne LiDAR (light detection and ranging data. However, most filtering algorithms need to carefully set up a number of complicated parameters to achieve high accuracy. In this paper, we present a new filtering method which only needs a few easy-to-set integer and Boolean parameters. Within the proposed approach, a LiDAR point cloud is inverted, and then a rigid cloth is used to cover the inverted surface. By analyzing the interactions between the cloth nodes and the corresponding LiDAR points, the locations of the cloth nodes can be determined to generate an approximation of the ground surface. Finally, the ground points can be extracted from the LiDAR point cloud by comparing the original LiDAR points and the generated surface. Benchmark datasets provided by ISPRS (International Society for Photogrammetry and Remote Sensing working Group III/3 are used to validate the proposed filtering method, and the experimental results yield an average total error of 4.58%, which is comparable with most of the state-of-the-art filtering algorithms. The proposed easy-to-use filtering method may help the users without much experience to use LiDAR data and related technology in their own applications more easily.

SCEW: a Microsoft Excel add-in for easy creation of survival curves.

Science.gov (United States)

Khan, Haseeb Ahmad

2006-07-01

Survival curves are frequently used for reporting survival or mortality outcomes of experimental pharmacological/toxicological studies and of clinical trials. Microsoft Excel is a simple and widely used tool for creation of numerous types of graphic presentations however it is difficult to create step-wise survival curves in Excel. Considering the familiarity of clinicians and biomedical scientists with Excel, an algorithm survival curves in Excel worksheet (SCEW) has been developed for easy creation of survival curves directly in Excel worksheets. The algorithm has been integrated in the form of Excel add-in for easy installation and usage. The program is based on modification of frequency data for binary break-up using the spreadsheet formula functions whereas a macro subroutine automates the creation of survival curves. The advantages of this program are simple data input, minimal procedural steps and the creation of survival curves in the familiar confines of Excel.

A computer-controlled CAMAC system for the operation of a neutron diffractometer

International Nuclear Information System (INIS)

Zwoll, K.; Mueller, K.D.; Will, G.

1976-01-01

The paper describes a computer-controlled four-circle diffractometer for the investigation of single crystals by neutron diffraction. The hardware is based on the internationally standardised CAMAC system. This makes the system described here independent of the type of computer used and also largely independent of the mechanical equipment used. The software is written in the interpretative language FOCAL which is easy to learn and ensures high flexibility in programming and thus also in the use of the diffractometer. (orig.) [de

32 CFR 701.125 - Computer matching program.

Science.gov (United States)

2010-07-01

... counterintelligence matches done in the course of performing a background check for security clearances of Federal... 32 National Defense 5 2010-07-01 2010-07-01 false Computer matching program. 701.125 Section 701... OF THE NAVY DOCUMENTS AFFECTING THE PUBLIC DON Privacy Program § 701.125 Computer matching program...

X-ray beam-position feedback system with easy-to-use beam-position monitor.

Science.gov (United States)

Park, Jae Yeon; Kim, Yesul; Lee, Sangsul; Lim, Jun

2018-05-01

X-ray beam-position stability is indispensable in cutting-edge experiments using synchrotron radiation. Here, for the first time, a beam-position feedback system is presented that utilizes an easy-to-use X-ray beam-position monitor incorporating a diamond-fluorescence screen. The acceptable range of the monitor is above 500 µm and the feedback system maintains the beam position within 3 µm. In addition to being inexpensive, the system has two key advantages: it works without a scale factor for position calibration, and it has no dependence on X-ray energy, X-ray intensity, beam size or beam shape.

How to use hand-held computers to evaluate wood drying.

Science.gov (United States)

Howard N. Rosen; Darrell S. Martin

1985-01-01

Techniques have been developed to evaluate end generate wood drying curves with hand-held computers (3-5K memory). Predictions of time to dry to a specific moisture content, drying rates, and other characteristics of wood drying curves can be made. The paper describes the development of programs and illustrates their use.

Present situation and necessity of computer programmed X-ray equipment

International Nuclear Information System (INIS)

Shiraishi, Junji; Hatagawa, Masakatsu

1989-01-01

In order to take radiographic photos, it is necessary to know a great deal of information. For example, mA, kV, exposure time, screen, grid, phototimer, etc. In this study, we examined 4 widely-used types computer-programmed X-ray equipment. These computer-assisted processes are designed to look at the data and make programmed individual decisions. The purpose is to reduce the differences in radiographic quality and the risk of retaking caused by the differences in experience among technicians. We concluded that none of them has ideal functions but each can be used as a source supply information, if a little remodeling is done, and we confirm that computer-programmed X-ray equipment is, and will continue to go be, necessary. (author)

Multithreaded transactions in scientific computing. The Growth06_v2 program

Science.gov (United States)

Daniluk, Andrzej

2009-07-01

Writing a concurrent program can be more difficult than writing a sequential program. Programmer needs to think about synchronization, race conditions and shared variables. Transactions help reduce the inconvenience of using threads. A transaction is an abstraction, which allows programmers to group a sequence of actions on the program into a logical, higher-level computation unit. This paper presents a new version of the GROWTHGr and GROWTH06 programs. New version program summaryProgram title: GROWTH06_v2 Catalogue identifier: ADVL_v2_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVL_v2_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 65 255 No. of bytes in distributed program, including test data, etc.: 865 985 Distribution format: tar.gz Programming language: Object Pascal Computer: Pentium-based PC Operating system: Windows 9x, XP, NT, Vista RAM: more than 1 MB Classification: 4.3, 7.2, 6.2, 8, 14 Catalogue identifier of previous version: ADVL_v2_0 Journal reference of previous version: Comput. Phys. Comm. 175 (2006) 678 Does the new version supersede the previous version?: Yes Nature of problem: The programs compute the RHEED intensities during the growth of thin epitaxial structures prepared using the molecular beam epitaxy (MBE). The computations are based on the use of kinematical diffraction theory. Solution method: Epitaxial growth of thin films is modelled by a set of non-linear differential equations [1]. The Runge-Kutta method with adaptive stepsize control was used for solving initial value problem for non-linear differential equations [2]. Reasons for new version: According to the users' suggestions functionality of the program has been improved. Moreover, new use cases have been added which make the handling of the program easier and more

Utilization of logistic computer programs in the power plant piping industry

International Nuclear Information System (INIS)

Motzel, E.

1982-01-01

Starting from the general situation of the power plant piping industry, the utilization of computer programs as well as the specific magnitude of complexity connected with the project realisation, the necessity for using logistic computer programs especially in case of nuclear power plants is explained. The logistic term as well as the logistic data are described. At the example of the nuclear power plant KRB II, Gundremmingen, Block B/C the practical use of such programs is shown. The planning, scheduling and supervision is carried out computer-aided by means of network-technique. The material management, prefabrication, installation including management of certificates for welding and testing activities is planned and controlled by computer programs as well. With the piping systems installed a complete erection work documentation is available which also serves as base for the billing versus the client. The budgeted costs are continuously controlled by means of a cost control program. Summing-up the further development in controlling piping contracts computer-supported is described with regard to software, hardware and the organisation structure. Furthermore the concept of a self-supporting field computer is introduced for the first time. (orig.) [de