Effectiveness of Podcasts as Laboratory Instructional Support: Learner Perceptions of Machine Shop and Welding Students

Science.gov (United States)

Lauritzen, Louis Dee

2014-01-01

Machine shop students face the daunting task of learning the operation of complex three-dimensional machine tools, and welding students must develop specific motor skills in addition to understanding the complexity of material types and characteristics. The use of consumer technology by the Millennial generation of vocational students, the…

On-line scheduling of two-machine open shops where jobs arrive over time

NARCIS (Netherlands)

Chen, B.; Vestjens, A.P.A.; Woeginger, G.J.

1998-01-01

We investigate the problem of on-line scheduling two-machine open shops with the objective of minimizing the makespan.Jobs arrive independently over time, and the existence of a job is not known until its arrival. In the clairvoyant on-line model, the processing requirement of every job becomes

Technical Interoperability for Machine Connectivity on the Shop Floor

Directory of Open Access Journals (Sweden)

Magnus Åkerman

2018-06-01

Full Text Available This paper presents a generic technical solution that can increase Industry 4.0 maturity by collecting data from sensors and control systems on the shop floor. Within the research project “5G-Enabled Manufacturing”, an LTE (Long-Term Evolution network with 5G technologies was deployed on the shop floor to enable fast and scalable connectivity. This network was used to connect a grinding machine to a remote private cloud where data was stored and streamed to a data analytics center. This enabled visibility and transparency of the production data, which is the basis for Industry 4.0 and smart manufacturing. The solution is described with a focus on high-level communication technologies above wireless communication standards. These technologies are discussed regarding technical interoperability, focusing on the system layout, communication standards, and open systems. From the discussion, it can be derived that generic solutions such as this are possible, but manufacturing end-users must expand and further internalize knowledge of future information and communication technologies to reduce their dependency on equipment and technology providers.

Practical job shop scheduling

NARCIS (Netherlands)

Schutten, Johannes M.J.

1998-01-01

The Shifting Bottleneck procedure is an intuitive and reasonably good approximation algorithm for the notoriously difficult classical job shop scheduling problem. The principle of decomposing a classical job shop problem into a series of single-machine problems can also easily be applied to job shop

Machine Shop I. Learning Activity Packets (LAPs). Section C--Hand and Bench Work.

Science.gov (United States)

Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains two learning activity packets (LAPs) for the "hand and bench work" instructional area of a Machine Shop I course. The two LAPs cover the following topics: hand and bench work and pedestal grinder. Each LAP contains a cover sheet that describes its purpose, an introduction, and the tasks included in the LAP;…

Time complexity and linear-time approximation of the ancient two-machine flow shop

NARCIS (Netherlands)

Rote, G.; Woeginger, G.J.

1998-01-01

We consider the scheduling problems F2¿Cmax and F2|no-wait|Cmax, i.e. makespan minimization in a two-machine flow shop, with and without no wait in process. For both problems solution algorithms based on sorting with O(n log n) running time are known, where n denotes the number of jobs. [1, 2]. We

Job shop scheduling model for non-identic machine with fixed delivery time to minimize tardiness

Science.gov (United States)

Kusuma, K. K.; Maruf, A.

2016-02-01

Scheduling non-identic machines problem with low utilization characteristic and fixed delivery time are frequent in manufacture industry. This paper propose a mathematical model to minimize total tardiness for non-identic machines in job shop environment. This model will be categorized as an integer linier programming model and using branch and bound algorithm as the solver method. We will use fixed delivery time as main constraint and different processing time to process a job. The result of this proposed model shows that the utilization of production machines can be increase with minimal tardiness using fixed delivery time as constraint.

T & I--Machine Shop. Kit No. 83. Instructor's Manual [and] Student Learning Activity Guide.

Science.gov (United States)

White, Jim

An instructor's manual and student activity guide on the machine shop are provided in this set of prevocational education materials which focuses on the vocational area of trade and industry. (This set of materials is one of ninety-two prevocational education sets arranged around a cluster of seven vocational offerings: agriculture, home…

Fast-food, everyday life and health: A qualitative study of 'chicken shops' in East London.

Science.gov (United States)

Thompson, Claire; Ponsford, Ruth; Lewis, Daniel; Cummins, Steven

2018-05-26

The higher prevalence of fast food outlets in deprived areas has been associated with the production and maintenance of geographical inequalities in diet. In the UK one type of fast food outlet - the 'chicken shop' - has been the focus of intense public health and media interest. Despite ongoing concerns and initiatives around regulating these establishments, the 'chicken shop' is both a commercially successful and ubiquitous feature of disadvantaged urban neighbourhoods. However, little is known about how they are perceived by local residents. We report data from a qualitative study of neighbourhood perceptions in a low SES urban setting. Narrative family interviews, go-along interviews and school video focus group workshops with 66 residents of East London were conducted over two waves. The topic of chicken shops was a prolific theme and a narrative analysis of these accounts revealed that local perceptions of chicken shops are complex and contradictory. Chicken shops were depicted as both potentially damaging for the health of local residents and, at the same time, as valued community spaces. This contradiction was discursively addressed in narrative via a series of rhetorical rebuttals that negated their potential to damage health on the grounds of concepts such as trust, choice, balance, food hygiene and compensatory physical activity. In some instances, chicken shops were described as 'healthy' and patronising them constructed as part of a healthy lifestyle. Chicken shops are embedded in the social fabric of neighbourhoods. Successful strategies to improve diet therefore requires context-sensitive environmental interventions. Copyright © 2018 Elsevier Ltd. All rights reserved.

The desktop muon detector: A simple, physics-motivated machine- and electronics-shop project for university students

Science.gov (United States)

Axani, S. N.; Conrad, J. M.; Kirby, C.

2017-12-01

This paper describes the construction of a desktop muon detector, an undergraduate-level physics project that develops machine-shop and electronics-shop technical skills. The desktop muon detector is a self-contained apparatus that employs a plastic scintillator as the detection medium and a silicon photomultiplier for light collection. This detector can be battery powered and is used in conjunction with the provided software. The total cost per detector is approximately 100. We describe physics experiments we have performed, and then suggest several other interesting measurements that are possible, with one or more desktop muon detectors.

EAST machine assembly and its measurement system

International Nuclear Information System (INIS)

Wu, S.T.

2005-01-01

The EAST (HT-7U) superconducting tokamak consists of a superconducting poloidal field magnet system, a toroidal field magnet system, a vacuum vessel and in-vessel components, thermal shields and a cryostat vessel. The main parts of the machine have been delivered to ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) successionally from 2003. For its complicated constitution and precise requirement, a reasonable assembly procedure and measurement technique should be defined carefully. Before the assembly procedure, a reference frame has been set up with reference fiducial targets on the wall of the test hall by an industrial measurement system. After the torus of TF coils is formed, a new reference frame will be set up from the position of the TF torus. The vacuum vessel with all inner parts will be installed with reference of the new reference frame. The big size and mass of components, special configuration of the superconducting machine with tight installation tolerances of the HT-7U (EAST) machine result in complicated assembly procedure. The procedure had begun with the installation of the support frame and the base of cryostat vessel last year. In this paper, the requirements of the assembly precise for some key components of the machine are described. The reference frame for the assembly and maintenance is explained. The assembly procedure is introduced

Minimizing total weighted completion time in a proportionate flow shop

NARCIS (Netherlands)

Shakhlevich, N.V.; Hoogeveen, J.A.; Pinedo, M.L.

1998-01-01

We study the special case of the m machine flow shop problem in which the processing time of each operation of job j is equal to pj; this variant of the flow shop problem is known as the proportionate flow shop problem. We show that for any number of machines and for any regular performance

A decomposition heuristics based on multi-bottleneck machines for large-scale job shop scheduling problems

Directory of Open Access Journals (Sweden)

Yingni Zhai

2014-10-01

Full Text Available Purpose: A decomposition heuristics based on multi-bottleneck machines for large-scale job shop scheduling problems (JSP is proposed.Design/methodology/approach: In the algorithm, a number of sub-problems are constructed by iteratively decomposing the large-scale JSP according to the process route of each job. And then the solution of the large-scale JSP can be obtained by iteratively solving the sub-problems. In order to improve the sub-problems' solving efficiency and the solution quality, a detection method for multi-bottleneck machines based on critical path is proposed. Therewith the unscheduled operations can be decomposed into bottleneck operations and non-bottleneck operations. According to the principle of “Bottleneck leads the performance of the whole manufacturing system” in TOC (Theory Of Constraints, the bottleneck operations are scheduled by genetic algorithm for high solution quality, and the non-bottleneck operations are scheduled by dispatching rules for the improvement of the solving efficiency.Findings: In the process of the sub-problems' construction, partial operations in the previous scheduled sub-problem are divided into the successive sub-problem for re-optimization. This strategy can improve the solution quality of the algorithm. In the process of solving the sub-problems, the strategy that evaluating the chromosome's fitness by predicting the global scheduling objective value can improve the solution quality.Research limitations/implications: In this research, there are some assumptions which reduce the complexity of the large-scale scheduling problem. They are as follows: The processing route of each job is predetermined, and the processing time of each operation is fixed. There is no machine breakdown, and no preemption of the operations is allowed. The assumptions should be considered if the algorithm is used in the actual job shop.Originality/value: The research provides an efficient scheduling method for the

Machine en theater : ontwerpconcepten van winkelgebouwen

NARCIS (Netherlands)

Kooyman, D.

1999-01-01

Machine and Theater. Design Concepts for Shop Buildings Most retail trade takes place in shops. For retailers a shop is the physical context for their commercial activities. Consumers spend a substantial amount of their time there, making essential purchases and also window shopping. Machine and

Machine en theater : ontwerpconcepten van winkelgebouwen

OpenAIRE

Kooyman, D.

1999-01-01

Machine and Theater. Design Concepts for Shop Buildings Most retail trade takes place in shops. For retailers a shop is the physical context for their commercial activities. Consumers spend a substantial amount of their time there, making essential purchases and also window shopping. Machine and theatre, design concepts for shop buildings investigates the function and the significance of shop space. The arcade, the department store, the supermarket, the shopping centre, the big-box retail par...

Proportionate Flow Shop Games

NARCIS (Netherlands)

Estevez Fernandez, M.A.; Mosquera, M.A.; Borm, P.E.M.; Hamers, H.J.M.

2006-01-01

In a proportionate flow shop problem several jobs have to be processed through a fixed sequence of machines and the processing time of each job is equal on all machines.By identifying jobs with agents, whose costs linearly depend on the completion time of their jobs, and assuming an initial

Heuristics for no-wait flow shop scheduling problem

Directory of Open Access Journals (Sweden)

Kewal Krishan Nailwal

2016-09-01

Full Text Available No-wait flow shop scheduling refers to continuous flow of jobs through different machines. The job once started should have the continuous processing through the machines without wait. This situation occurs when there is a lack of an intermediate storage between the processing of jobs on two consecutive machines. The problem of no-wait with the objective of minimizing makespan in flow shop scheduling is NP-hard; therefore the heuristic algorithms are the key to solve the problem with optimal solution or to approach nearer to optimal solution in simple manner. The paper describes two heuristics, one constructive and an improvement heuristic algorithm obtained by modifying the constructive one for sequencing n-jobs through m-machines in a flow shop under no-wait constraint with the objective of minimizing makespan. The efficiency of the proposed heuristic algorithms is tested on 120 Taillard’s benchmark problems found in the literature against the NEH under no-wait and the MNEH heuristic for no-wait flow shop problem. The improvement heuristic outperforms all heuristics on the Taillard’s instances by improving the results of NEH by 27.85%, MNEH by 22.56% and that of the proposed constructive heuristic algorithm by 24.68%. To explain the computational process of the proposed algorithm, numerical illustrations are also given in the paper. Statistical tests of significance are done in order to draw the conclusions.

Forecasting of indirect consumables for a Job Shop

Science.gov (United States)

Shakeel, M.; Khan, S.; Khan, W. A.

2016-08-01

A job shop has an arrangement where similar machines (Direct consumables) are grouped together and use indirect consumables to produce a product. The indirect consumables include hack saw blades, emery paper, painting brush etc. The job shop is serving various orders at a particular time for the optimal operation of job shop. Forecasting is required to predict the demand of direct and indirect consumables in a job shop. Forecasting is also needed to manage lead time, optimize inventory cost and stock outs. The objective of this research is to obtain the forecast for indirect consumables. The paper shows how job shop can manage their indirect consumables more accurately by establishing a new technique of forecasting. This results in profitable use of job shop by multiple users.

Comparison of Firefly algorithm and Artificial Immune System algorithm for lot streaming in -machine flow shop scheduling

Directory of Open Access Journals (Sweden)

G. Vijay Chakaravarthy

2012-11-01

Full Text Available Lot streaming is a technique used to split the processing of lots into several sublots (transfer batches to allow the overlapping of operations in a multistage manufacturing systems thereby shortening the production time (makespan. The objective of this paper is to minimize the makespan and total flow time of -job, -machine lot streaming problem in a flow shop with equal and variable size sublots and also to determine the optimal sublot size. In recent times researchers are concentrating and applying intelligent heuristics to solve flow shop problems with lot streaming. In this research, Firefly Algorithm (FA and Artificial Immune System (AIS algorithms are used to solve the problem. The results obtained by the proposed algorithms are also compared with the performance of other worked out traditional heuristics. The computational results shows that the identified algorithms are more efficient, effective and better than the algorithms already tested for this problem.

Simulation as a planning tool for job-shop production environment

Science.gov (United States)

Maram, Venkataramana; Nawawi, Mohd Kamal Bin Mohd; Rahman, Syariza Abdul; Sultan, Sultan Juma

2015-12-01

In this paper, we made an attempt to use discrete event simulation software ARENA® as a planning tool for job shop production environment. We considered job shop produces three types of Jigs with different sequence of operations to study and improve shop floor performance. The sole purpose of the study is to identifying options to improve machines utilization, reducing job waiting times at bottleneck machines. First, the performance of the existing system was evaluated by using ARENA®. Then identified improvement opportunities by analyzing base system results. Second, updated the model with most economical options. The proposed new system outperforms with that of the current base system by 816% improvement in delay times at paint shop by increase 2 to 3 and Jig cycle time reduces by Jig1 92%, Jig2 65% and Jig3 41% and hence new proposal was recommended.

Expanding Options. A Model to Attract Secondary Students into Nontraditional Vocational Programs. For Emphasis in: Building Trades, Electronics, Health Services, Machine Shop, Welding.

Science.gov (United States)

Good, James D.; DeVore, Mary Ann

This model has been designed for use by Missouri secondary schools in attracting females and males into nontraditional occupational programs. The research-based strategies are intended for implementation in the following areas: attracting females into building trades, electronics, machine shop, and welding; and males into secondary health…

Outsourcing and scheduling for a two-machine flow shop with release times

Science.gov (United States)

Ahmadizar, Fardin; Amiri, Zeinab

2018-03-01

This article addresses a two-machine flow shop scheduling problem where jobs are released intermittently and outsourcing is allowed. The first operations of outsourced jobs are processed by the first subcontractor, they are transported in batches to the second subcontractor for processing their second operations, and finally they are transported back to the manufacturer. The objective is to select a subset of jobs to be outsourced, to schedule both the in-house and the outsourced jobs, and to determine a transportation plan for the outsourced jobs so as to minimize the sum of the makespan and the outsourcing and transportation costs. Two mathematical models of the problem and several necessary optimality conditions are presented. A solution approach is then proposed by incorporating the dominance properties with an ant colony algorithm. Finally, computational experiments are conducted to evaluate the performance of the models and solution approach.

Batch Scheduling for Hybrid Assembly Differentiation Flow Shop to Minimize Total Actual Flow Time

Science.gov (United States)

Maulidya, R.; Suprayogi; Wangsaputra, R.; Halim, A. H.

2018-03-01

A hybrid assembly differentiation flow shop is a three-stage flow shop consisting of Machining, Assembly and Differentiation Stages and producing different types of products. In the machining stage, parts are processed in batches on different (unrelated) machines. In the assembly stage, each part of the different parts is assembled into an assembly product. Finally, the assembled products will further be processed into different types of final products in the differentiation stage. In this paper, we develop a batch scheduling model for a hybrid assembly differentiation flow shop to minimize the total actual flow time defined as the total times part spent in the shop floor from the arrival times until its due date. We also proposed a heuristic algorithm for solving the problems. The proposed algorithm is tested using a set of hypothetic data. The solution shows that the algorithm can solve the problems effectively.

Two-agent scheduling in open shops subject to machine availability and eligibility constraints

Directory of Open Access Journals (Sweden)

Ling-Huey Su

2015-09-01

Full Text Available Purpose: The aims of this article are to develop a new mathematical formulation and a new heuristic for the problem of preemptive two-agent scheduling in open shops subject to machine maintenance and eligibility constraints. Design/methodology: Using the ideas of minimum cost flow network and constraint programming, a heuristic and a network based linear programming are proposed to solve the problem. Findings: Computational experiments show that the heuristic generates a good quality schedule with a deviation of 0.25% on average from the optimum and the network based linear programming model can solve problems up to 110 jobs combined with 10 machines without considering the constraint that each operation can be processed on at most one machine at a time. In order to satisfy this constraint, a time consuming Constraint Programming is proposed. For n = 80 and m = 10, the average execution time for the combined models (linear programming model combined with Constraint programming exceeds two hours. Therefore, the heuristic algorithm we developed is very efficient and is in need. Practical implications: Its practical implication occurs in TFT-LCD and E-paper manufacturing wherein units go through a series of diagnostic tests that do not have to be performed in any specified order. Originality/value: The main contribution of the article is to split the time horizon into many time intervals and use the dispatching rule for each time interval in the heuristic algorithm, and also to combine the minimum cost flow network with the Constraint Programming to solve the problem optimally. 

FLOW-SHOP SCHEDULING WITH MULTIPLE OPERATIONS AND TIME LAGS

NARCIS (Netherlands)

RIEZEBOS, J; GAALMAN, GJC; GUPTA, JND

A scheduling system is proposed and developed for a special type of flow shop. Ln this flow shop there is one machine at each stage. A job may require multiple operations at each stage. The first operation of a job on stage j cannot start until the last operation of the job on stage j - 1 has

Consumer Nutrition Environments of Hospitals: An Exploratory Analysis Using the Hospital Nutrition Environment Scan for Cafeterias, Vending Machines, and Gift Shops, 2012

Science.gov (United States)

Sallis, James F.; Swartz, Michael D.; Hoelscher, Deanna M.; Peskin, Melissa F.

2013-01-01

Introduction Hospitals are the primary worksite of over 5 million adults in the United States, and millions of meals are procured and consumed in this setting. Because many worksite nutrition initiatives use an ecological framework to improve the dietary habits of employees, the nutrition values of foods served in hospitals is receiving attention. Methods This study used the Hospital Nutrition Environment Scan for Cafeterias, Vending Machines, and Gift Shops to quantitatively describe the consumer nutrition environments of 39 hospitals in Southern California. Data were collected by visiting each facility once from February 2012 through May 2012. Results On average, hospitals achieved only 29%, 33%, and less than 1% of the total possible points for their cafeteria, vending machines, and gift shops sections, respectively; overall, hospitals scored 25% of the total possible points. Large facility size and contracted food service operations were associated with some healthy practices in hospital cafeterias, but we found no association between these variables and the sectional or overall nutrition composite scores. Conclusion The average consumer nutrition environment of hospitals in this sample was minimally conducive to healthful eating. Nutrition-related interventions are warranted in hospital settings. PMID:23823699

Consumer nutrition environments of hospitals: an exploratory analysis using the Hospital Nutrition Environment Scan for Cafeterias, Vending Machines, and Gift Shops, 2012.

Science.gov (United States)

Winston, Courtney P; Sallis, James F; Swartz, Michael D; Hoelscher, Deanna M; Peskin, Melissa F

2013-07-03

Hospitals are the primary worksite of over 5 million adults in the United States, and millions of meals are procured and consumed in this setting. Because many worksite nutrition initiatives use an ecological framework to improve the dietary habits of employees, the nutrition values of foods served in hospitals is receiving attention. This study used the Hospital Nutrition Environment Scan for Cafeterias, Vending Machines, and Gift Shops to quantitatively describe the consumer nutrition environments of 39 hospitals in Southern California. Data were collected by visiting each facility once from February 2012 through May 2012. On average, hospitals achieved only 29%, 33%, and less than 1% of the total possible points for their cafeteria, vending machines, and gift shops sections, respectively; overall, hospitals scored 25% of the total possible points. Large facility size and contracted food service operations were associated with some healthy practices in hospital cafeterias, but we found no association between these variables and the sectional or overall nutrition composite scores. The average consumer nutrition environment of hospitals in this sample was minimally conducive to healthful eating. Nutrition-related interventions are warranted in hospital settings.

Plans for miniature machining at LASL

International Nuclear Information System (INIS)

Rhorer, R.L.

1979-01-01

A special shop for making miniature or very small parts is being established within the LASL Shop Department, and one of the machine tools for this shop is a high precision lathe. The report describes a method based on scale modeling analysis which was used to define the specific requirements for this lathe

The Effects of Machine Load Sitnations on Performance of Job Shop and Group Scheduling

OpenAIRE

Torkul, O.

2018-01-01

Perfonnance of job shop and group scheduling ndermulti­natch work input environment was exarnined against two nachine load (light and high load) situations. n order to conduct the analysis, a deterministic computer ;im ulation program was written and used. A job shop {JS) model is applied to the shop floor area and :ompared with a simulation of a similar proposal except hat group technology (GT) model was used in the shop loor area instead. )etailed analysis of the results from applying diffe...

The Effects of Machine Load Sitnations on Performance of Job Shop and Group Scheduling

OpenAIRE

O.TORKUL TORKUL

1998-01-01

Perfonnance of job shop and group scheduling ndermulti­natch work input environment was exarnined against two nachine load (light and high load) situations. n order to conduct the analysis, a deterministic computer ;im ulation program was written and used. A job shop {JS) model is applied to the shop floor area and :ompared with a simulation of a similar proposal except hat group technology (GT) model was used in the shop loor area instead. )etailed analysis of the results from applying diffe...

Heuristic and Exact Algorithms for the Two-Machine Just in Time Job Shop Scheduling Problem

Directory of Open Access Journals (Sweden)

Mohammed Al-Salem

2016-01-01

Full Text Available The problem addressed in this paper is the two-machine job shop scheduling problem when the objective is to minimize the total earliness and tardiness from a common due date (CDD for a set of jobs when their weights equal 1 (unweighted problem. This objective became very significant after the introduction of the Just in Time manufacturing approach. A procedure to determine whether the CDD is restricted or unrestricted is developed and a semirestricted CDD is defined. Algorithms are introduced to find the optimal solution when the CDD is unrestricted and semirestricted. When the CDD is restricted, which is a much harder problem, a heuristic algorithm is proposed to find approximate solutions. Through computational experiments, the heuristic algorithms’ performance is evaluated with problems up to 500 jobs.

Machining of uranium and uranium alloys

International Nuclear Information System (INIS)

Morris, T.O.

1981-01-01

Uranium and uranium alloys can be readily machined by conventional methods in the standard machine shop when proper safety and operating techniques are used. Material properties that affect machining processes and recommended machining parameters are discussed. Safety procedures and precautions necessary in machining uranium and uranium alloys are also covered. 30 figures

Modification of structural graphite machining

International Nuclear Information System (INIS)

Lavrenev, M.M.

1979-01-01

Studied are machining procedures for structural graphites (GMZ, MG, MG-1, PPG) most widely used in industry, of the article mass being about 50 kg. Presented are dependences necessary for the calculation of cross sections of chip suction tappers and duster pipelines in machine shops for structural graphite machining

A new Nawaz-Enscore-Ham-based heuristic for permutation flow-shop problems with bicriteria of makespan and machine idle time

Science.gov (United States)

Liu, Weibo; Jin, Yan; Price, Mark

2016-10-01

A new heuristic based on the Nawaz-Enscore-Ham algorithm is proposed in this article for solving a permutation flow-shop scheduling problem. A new priority rule is proposed by accounting for the average, mean absolute deviation, skewness and kurtosis, in order to fully describe the distribution style of processing times. A new tie-breaking rule is also introduced for achieving effective job insertion with the objective of minimizing both makespan and machine idle time. Statistical tests illustrate better solution quality of the proposed algorithm compared to existing benchmark heuristics.

PERBANDINGAN KINERJA ALGORITMA GENETIKA DAN ALGORITMA HEURISTIK RAJENDRAN UNTUK PENJADUALAN PRODUKSI JENIS FLOW SHOP

Directory of Open Access Journals (Sweden)

Tessa Vanina Soetanto

1999-01-01

Full Text Available Flow shop scheduling problem is to schedule a production process of n jobs that go through the same process sequence and the same m machines. Most researches are don to accomplish only one objective, i.e. minimizing makespan. The other objective, such as total flow time, or multiple objectives that is minimizing makespan, total flow time and machine idle time, will be more effective in reducing scheduling cost, as written in French (1982. Rajendran algorithm (1995 that solves flow shop problem with multiple objectives will be used to evaluate the proposed algorithm: Genetic Algorithm, developed by Sridhar & Rajendran (1996 on a problem that existed in a shoe factory. Abstract in Bahasa Indonesia : Masalah penjadualan flow shop adalah menjadualkan proses produksi dari masing-masing n job yang mempunyai urutan proses produksi dan melalui m mesin yang sama. Kebanyakan penelitian hanya mengacu pada satu tujuan saja yaitu meminimumkan makespan. Tujuan yang lain, seperti meminimumkan total flow time atau multiple objectives yang meminimumkan makespan, total flow time dan machine idle time akan lebih efektif dalam mengurangi biaya penjadualan, sebagaimana dikatakan oleh French (1982. Algoritma Rajendran (1995 yang menyelesaikan masalah flow shop dengan multiple objectives akan dipergunakan untuk mengevaluasi algoritma usulan: Algoritma Genetika, yang dikembangkan oleh Sridhar & Rajendran (1996 pada suatu masalah yang ditemui di suatu perusahaan sepatu. Kata kunci: flow shop, algoritma genetika, multiple objectives

Machine en Theater. Ontwerpconcepten van winkelgebouwen

NARCIS (Netherlands)

Kooijman, D.C.

1999-01-01

Machine and Theater, Design Concepts for Shop Buildings is a richly illustrated study of the architectural and urban development of retail buildings, focusing on six essential shop types: the passage and the department store in particular in Germany and France in the nineteenth century; supermarkets

An evaluation of retrofit engineering control interventions to reduce perchloroethylene exposures in commercial dry-cleaning shops.

Science.gov (United States)

Earnest, G Scott; Ewers, Lynda M; Ruder, Avima M; Petersen, Martin R; Kovein, Ronald J

2002-02-01

Real-time monitoring was used to evaluate the ability of engineering control devices retrofitted on two existing dry-cleaning machines to reduce worker exposures to perchloroethylene. In one dry-cleaning shop, a refrigerated condenser was installed on a machine that had a water-cooled condenser to reduce the air temperature, improve vapor recovery, and lower exposures. In a second shop, a carbon adsorber was retrofitted on a machine to adsorb residual perchloroethylene not collected by the existing refrigerated condenser to improve vapor recovery and reduce exposures. Both controls were successful at reducing the perchloroethylene exposures of the dry-cleaning machine operator. Real-time monitoring was performed to evaluate how the engineering controls affected exposures during loading and unloading the dry-cleaning machine, a task generally considered to account for the highest exposures. The real-time monitoring showed that dramatic reductions occurred in exposures during loading and unloading of the dry-cleaning machine due to the engineering controls. Peak operator exposures during loading and unloading were reduced by 60 percent in the shop that had a refrigerated condenser installed on the dry-cleaning machine and 92 percent in the shop that had a carbon adsorber installed. Although loading and unloading exposures were dramatically reduced, drops in full-shift time-weighted average (TWA) exposures were less dramatic. TWA exposures to perchloroethylene, as measured by conventional air sampling, showed smaller reductions in operator exposures of 28 percent or less. Differences between exposure results from real-time and conventional air sampling very likely resulted from other uncontrolled sources of exposure, differences in shop general ventilation before and after the control was installed, relatively small sample sizes, and experimental variability inherent in field research. Although there were some difficulties and complications with installation and

JOB SHOP METHODOLOGY BASED ON AN ANT COLONY

Directory of Open Access Journals (Sweden)

OMAR CASTRILLON

2009-01-01

Full Text Available The purpose of this study is to reduce the total process time (Makespan and to increase the machines working time, in a job shop environment, using a heuristic based on ant colony optimization. This work is developed in two phases: The first stage describes the identification and definition of heuristics for the sequential processes in the job shop. The second stage shows the effectiveness of the system in the traditional programming of production. A good solution, with 99% efficiency is found using this technique.

ProteinShop: A tool for interactive protein manipulation and steering

Energy Technology Data Exchange (ETDEWEB)

Crivelli, Silvia; Kreylos, Oliver; Max, Nelson; Hamann, Bernd; Bethel, Wes

2004-05-25

We describe ProteinShop, a new visualization tool that streamlines and simplifies the process of determining optimal protein folds. ProteinShop may be used at different stages of a protein structure prediction process. First, it can create protein configurations containing secondary structures specified by the user. Second, it can interactively manipulate protein fragments to achieve desired folds by adjusting the dihedral angles of selected coil regions using an Inverse Kinematics method. Last, it serves as a visual framework to monitor and steer a protein structure prediction process that may be running on a remote machine. ProteinShop was used to create initial configurations for a protein structure prediction method developed by a team that competed in CASP5. ProteinShop's use accelerated the process of generating initial configurations, reducing the time required from days to hours. This paper describes the structure of ProteinShop and discusses its main features.

Minimizing makespan in a two-stage flow shop with parallel batch-processing machines and re-entrant jobs

Science.gov (United States)

Huang, J. D.; Liu, J. J.; Chen, Q. X.; Mao, N.

2017-06-01

Against a background of heat-treatment operations in mould manufacturing, a two-stage flow-shop scheduling problem is described for minimizing makespan with parallel batch-processing machines and re-entrant jobs. The weights and release dates of jobs are non-identical, but job processing times are equal. A mixed-integer linear programming model is developed and tested with small-scale scenarios. Given that the problem is NP hard, three heuristic construction methods with polynomial complexity are proposed. The worst case of the new constructive heuristic is analysed in detail. A method for computing lower bounds is proposed to test heuristic performance. Heuristic efficiency is tested with sets of scenarios. Compared with the two improved heuristics, the performance of the new constructive heuristic is superior.

Discrete particle swarm optimization to solve multi-objective limited-wait hybrid flow shop scheduling problem

Science.gov (United States)

Santosa, B.; Siswanto, N.; Fiqihesa

2018-04-01

This paper proposes a discrete Particle Swam Optimization (PSO) to solve limited-wait hybrid flowshop scheduing problem with multi objectives. Flow shop schedulimg represents the condition when several machines are arranged in series and each job must be processed at each machine with same sequence. The objective functions are minimizing completion time (makespan), total tardiness time, and total machine idle time. Flow shop scheduling model always grows to cope with the real production system accurately. Since flow shop scheduling is a NP-Hard problem then the most suitable method to solve is metaheuristics. One of metaheuristics algorithm is Particle Swarm Optimization (PSO), an algorithm which is based on the behavior of a swarm. Originally, PSO was intended to solve continuous optimization problems. Since flow shop scheduling is a discrete optimization problem, then, we need to modify PSO to fit the problem. The modification is done by using probability transition matrix mechanism. While to handle multi objectives problem, we use Pareto Optimal (MPSO). The results of MPSO is better than the PSO because the MPSO solution set produced higher probability to find the optimal solution. Besides the MPSO solution set is closer to the optimal solution

Innovation prize for air-conditioned assembly shop - Constant temperature allows the assembly of high-precision machining centres; Innovationspreis fuer klimatisierte Montagehalle

Energy Technology Data Exchange (ETDEWEB)

Schmid, W.

2002-07-01

This article describes the clever combination of various techniques to achieve the goal of providing a stable ambient temperature with an accuracy of +/- 1 K in the assembly shop of a German manufacturer of precision machine tools. The requirements placed on the assembly and operation of machine tools operating to an accuracy of less that a hundredth of a millimetre are discussed. The award-winning heating and cooling system, which features the use of gravity cooling, geothermal energy (ground water for cooling) and the use of constructional elements (floor, facades, windows) for thermal buffering is described. The ingenious control system with 32 control zones and 64 sensors is described, which also provides the company's management with long-term documentation of temperature conditions for quality assurance purposes. Technical data on the installation is provided in table form.

Solving no-wait two-stage flexible flow shop scheduling problem with unrelated parallel machines and rework time by the adjusted discrete Multi Objective Invasive Weed Optimization and fuzzy dominance approach

Energy Technology Data Exchange (ETDEWEB)

Jafarzadeh, Hassan; Moradinasab, Nazanin; Gerami, Ali

2017-07-01

Adjusted discrete Multi-Objective Invasive Weed Optimization (DMOIWO) algorithm, which uses fuzzy dominant approach for ordering, has been proposed to solve No-wait two-stage flexible flow shop scheduling problem. Design/methodology/approach: No-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times and probable rework in both stations, different ready times for all jobs and rework times for both stations as well as unrelated parallel machines with regards to the simultaneous minimization of maximum job completion time and average latency functions have been investigated in a multi-objective manner. In this study, the parameter setting has been carried out using Taguchi Method based on the quality indicator for beater performance of the algorithm. Findings: The results of this algorithm have been compared with those of conventional, multi-objective algorithms to show the better performance of the proposed algorithm. The results clearly indicated the greater performance of the proposed algorithm. Originality/value: This study provides an efficient method for solving multi objective no-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times, probable rework in both stations, different ready times for all jobs, rework times for both stations and unrelated parallel machines which are the real constraints.

Solving no-wait two-stage flexible flow shop scheduling problem with unrelated parallel machines and rework time by the adjusted discrete Multi Objective Invasive Weed Optimization and fuzzy dominance approach

International Nuclear Information System (INIS)

Jafarzadeh, Hassan; Moradinasab, Nazanin; Gerami, Ali

2017-01-01

Adjusted discrete Multi-Objective Invasive Weed Optimization (DMOIWO) algorithm, which uses fuzzy dominant approach for ordering, has been proposed to solve No-wait two-stage flexible flow shop scheduling problem. Design/methodology/approach: No-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times and probable rework in both stations, different ready times for all jobs and rework times for both stations as well as unrelated parallel machines with regards to the simultaneous minimization of maximum job completion time and average latency functions have been investigated in a multi-objective manner. In this study, the parameter setting has been carried out using Taguchi Method based on the quality indicator for beater performance of the algorithm. Findings: The results of this algorithm have been compared with those of conventional, multi-objective algorithms to show the better performance of the proposed algorithm. The results clearly indicated the greater performance of the proposed algorithm. Originality/value: This study provides an efficient method for solving multi objective no-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times, probable rework in both stations, different ready times for all jobs, rework times for both stations and unrelated parallel machines which are the real constraints.

Hygiene of work in main shops of modern coking by-product industry. [USSR

Energy Technology Data Exchange (ETDEWEB)

Kapitul' skii, V B

1984-07-01

The hygiene of working conditions is evaluated and compared for coking by-product industry shops using modern technology and machines with those using obsolete equipment and methods. Most basic factors in contamination of atmosphere of coking, pitch-coking and metal-refining shops are coal and coke dust, carbon monoxide and polycyclic aromatic hydrocarbons, especially carcinogenic benzpyrene. Contamination of air of working zone is determined by details of technology: periodicity or continuity of industrial processes, use of improved equipment for smokeless injection of charge into stoves and of hermetic pipes to remove gas with hydraulically operated caps, position of machines in shops and in coal tar distillation removal of carcinogenic benzpyrene by sulfonation and aeration. In modernized shops of coking by-product industry, illness and loss of work capacity are significantly lower than in plants using obsolete methods and equipment. Measures are presented for hygienic improvement of working conditions; both methods to further increase efficiency of technological processes and methods to protect individual worker on job such as use of respirators, protective clothing, plexiglass shields, shampoos and skin creams. 14 references.

Un algoritmo genético para el problema de Job Shop Flexible A genetic algorithm for the Flexible Job Shop problem

Directory of Open Access Journals (Sweden)

Rosa Medina Durán

2011-06-01

Full Text Available En este estudio se propone e implementa computacionalmente un algoritmo genético secuencial para resolver el problema del Job Shop Flexible (existente en la Gestión de Operaciones, el cual es parte de la familia de los problemas de programación de tareas o trabajos (Scheduling en un taller que funciona a pedido. Surge como una generalización del problema del Job Shop y permite optimizar el uso de los recursos (máquinas con mayor flexibilidad, ya que cada máquina puede realizar más de una operación. Este problema ha sido estudiado por numerosos autores, los que han propuesto diversos modelos matemáticos y enfoques heurísticos. Debido a la naturaleza combinatoria, los métodos exactos que resuelven modelos matemáticos encuentran soluciones sólo para instancias pequeñas o simples del problema mencionado. Los resultados muestran la efectividad del algoritmo propuesto para entregar buenas soluciones en tiempos computacionales razonables en más de 130 instancias encontradas en la literatura.This study proposes and computationally implements a sequential genetic algorithm to solve the Flexible Job Shop problem (found in Operations Management, which is part of the family of job or task scheduling problems in a shop that works on demand. It is a generalization of the Job Shop problem, and allows optimizing the use of resources (machines in the shop, with greater flexibility, since each machine can perform more than one operation. This problem has been studied by many authors, who have proposed various mathematical models and heuristic approaches. Due to the combinatorial nature of the problem, the exact methods that solve the mathematical models are often solutions for small and simple instances of the problem. The results show the effectiveness of the proposed algorithm to provide good solutions in reasonable computational times in over 130 instances found in the literatura.

Scheduling job shop - A case study

Science.gov (United States)

Abas, M.; Abbas, A.; Khan, W. A.

2016-08-01

The scheduling in job shop is important for efficient utilization of machines in the manufacturing industry. There are number of algorithms available for scheduling of jobs which depend on machines tools, indirect consumables and jobs which are to be processed. In this paper a case study is presented for scheduling of jobs when parts are treated on available machines. Through time and motion study setup time and operation time are measured as total processing time for variety of products having different manufacturing processes. Based on due dates different level of priority are assigned to the jobs and the jobs are scheduled on the basis of priority. In view of the measured processing time, the times for processing of some new jobs are estimated and for efficient utilization of the machines available an algorithm is proposed and validated.

Preemptive scheduling in a two-stage multiprocessor flow shop is NP-hard

NARCIS (Netherlands)

Hoogeveen, J.A.; Lenstra, J.K.; Veltman, B.

1996-01-01

In 1954, Johnson gave an efficient algorithm for minimizing makespan in a two-machine flow shop; there is no advantage to preemption in this case. McNaughton's wrap-around rule of 1959 finds a shortest preemptive schedule on identical parallel machines in linear time. A similarly efficient algorithm

Solving Flexible Job-Shop Scheduling Problem Using Gravitational Search Algorithm and Colored Petri Net

Directory of Open Access Journals (Sweden)

Behnam Barzegar

2012-01-01

Full Text Available Scheduled production system leads to avoiding stock accumulations, losses reduction, decreasing or even eliminating idol machines, and effort to better benefitting from machines for on time responding customer orders and supplying requested materials in suitable time. In flexible job-shop scheduling production systems, we could reduce time and costs by transferring and delivering operations on existing machines, that is, among NP-hard problems. The scheduling objective minimizes the maximal completion time of all the operations, which is denoted by Makespan. Different methods and algorithms have been presented for solving this problem. Having a reasonable scheduled production system has significant influence on improving effectiveness and attaining to organization goals. In this paper, new algorithm were proposed for flexible job-shop scheduling problem systems (FJSSP-GSPN that is based on gravitational search algorithm (GSA. In the proposed method, the flexible job-shop scheduling problem systems was modeled by color Petri net and CPN tool and then a scheduled job was programmed by GSA algorithm. The experimental results showed that the proposed method has reasonable performance in comparison with other algorithms.

A Method of Flow-Shop Re-Scheduling Dealing with Variation of Productive Capacity

Directory of Open Access Journals (Sweden)

Kenzo KURIHARA

2005-02-01

Full Text Available We can make optimum scheduling results using various methods that are proposed by many researchers. However, it is very difficult to process the works on time without delaying the schedule. There are two major causes that disturb the planned optimum schedules; they are (1the variation of productive capacity, and (2the variation of products' quantities themselves. In this paper, we deal with the former variation, or productive capacities, at flow-shop works. When production machines in a shop go out of order at flow-shops, we cannot continue to operate the productions and we have to stop the production line. To the contrary, we can continue to operate the shops even if some workers absent themselves. Of course, in this case, the production capacities become lower, because workers need to move from a machine to another to overcome the shortage of workers and some shops cannot be operated because of the worker shortage. We developed a new re-scheduling method based on Branch-and Bound method. We proposed an equation for calculating the lower bound for our Branch-and Bound method in a practical time. Some evaluation experiments are done using practical data of real flow-shop works. We compared our results with those of another simple scheduling method, and we confirmed the total production time of our result is shorter than that of another method by 4%.

Ant Foraging Behavior for Job Shop Problem

Directory of Open Access Journals (Sweden)

Mahad Diyana Abdul

2016-01-01

Full Text Available Ant Colony Optimization (ACO is a new algorithm approach, inspired by the foraging behavior of real ants. It has frequently been applied to many optimization problems and one such problem is in solving the job shop problem (JSP. The JSP is a finite set of jobs processed on a finite set of machine where once a job initiates processing on a given machine, it must complete processing and uninterrupted. In solving the Job Shop Scheduling problem, the process is measure by the amount of time required in completing a job known as a makespan and minimizing the makespan is the main objective of this study. In this paper, we developed an ACO algorithm to minimize the makespan. A real set of problems from a metal company in Johor bahru, producing 20 parts with jobs involving the process of clinching, tapping and power press respectively. The result from this study shows that the proposed ACO heuristics managed to produce a god result in a short time.

Genetic programming for evolving due-date assignment models in job shop environments.

Science.gov (United States)

Nguyen, Su; Zhang, Mengjie; Johnston, Mark; Tan, Kay Chen

2014-01-01

Due-date assignment plays an important role in scheduling systems and strongly influences the delivery performance of job shops. Because of the stochastic and dynamic nature of job shops, the development of general due-date assignment models (DDAMs) is complicated. In this study, two genetic programming (GP) methods are proposed to evolve DDAMs for job shop environments. The experimental results show that the evolved DDAMs can make more accurate estimates than other existing dynamic DDAMs with promising reusability. In addition, the evolved operation-based DDAMs show better performance than the evolved DDAMs employing aggregate information of jobs and machines.

Aesthetic quality inference for online fashion shopping

Science.gov (United States)

Chen, Ming; Allebach, Jan

2014-03-01

On-line fashion communities in which participants post photos of personal fashion items for viewing and possible purchase by others are becoming increasingly popular. Generally, these photos are taken by individuals who have no training in photography with low-cost mobile phone cameras. It is desired that photos of the products have high aesthetic quality to improve the users' online shopping experience. In this work, we design features for aesthetic quality inference in the context of online fashion shopping. Psychophysical experiments are conducted to construct a database of the photos' aesthetic evaluation, specifically for photos from an online fashion shopping website. We then extract both generic low-level features and high-level image attributes to represent the aesthetic quality. Using a support vector machine framework, we train a predictor of the aesthetic quality rating based on the feature vector. Experimental results validate the efficacy of our approach. Metadata such as the product type are also used to further improve the result.

Algoritmo genético aplicado a la programación en talleres de maquinado//Genetic algorithm applied to scheduling in machine shops

Directory of Open Access Journals (Sweden)

José Eduardo Márquez-Delgado

2012-09-01

Full Text Available En este trabajo se utiliza la metaheurística nombrada algoritmo genético, para dos variantes típicas de problemas de planificación presentes en un taller de maquinado de piezas: las variantes flujo general y flujo regular, y se ha seleccionado la minimización del tiempo de finalización de todos los trabajos ocamino máximo, como objetivo a optimizar en un plan de trabajo. Este problema es considerado de difícil solución y es típico de la optimización combinatoria. Los resultados demuestran la calidad de las soluciones encontradas en correspondencia con el tiempo de cómputo empleado, al ser comparados conproblemas clásicos reportados por otros autores. La representación propuesta de cada cromosoma genera el universo completo de soluciones factibles, donde es posible encontrar valores óptimos globales de solución y cumple con las restricciones del problema.Palabras claves: algoritmo genético, cromosomas, flujo general, flujo regular, planificación, camino máximo._____________________________________________________________________________AbstractIn this paper we use the metaheuristic named genetic algorithm, for two typical variants of problems of scheduling present in a in a machine shop parts: the variant job shop and flow shop, and the minimization of the time of finalization of all the works has been selected, good known as makespan, as objective tooptimize in a work schedule. This problem is considered to be a difficult solution and is typical in combinatory optimization. The results demonstrate the quality of the solutions found in correspondence with the time of used computation, when being compared with classic problems reported by other authors.The proposed representation of each chromosome generates the complete universe of feasible solutions, where it is possible to find global good values of solution and it fulfills the restrictions of the problem.Key words: genetic algorithm, chromosomes, flow shop, job shop

Vape shops: who uses them and what do they do?

Science.gov (United States)

Pattinson, Julie; Lewis, Sarah; Bains, Manpreet; Britton, John; Langley, Tessa

2018-04-23

'Vape shops' are a popular source for buying electronic cigarettes (e-cigarettes) and related products. The products that vape shops sell, their marketing techniques and the extent to which they provide information or encouragement to smokers to quit tobacco use, as well as the patterns of tobacco and e-cigarette use of their customers are not well understood. We conducted cross-sectional surveys in vape shops in the East Midlands region of the United Kingdom, one with shop staff (n = 41), and one with customers (n = 197). The majority of customers (84%) currently used e-cigarettes. Among current vapers, 19% were dual users and 78% had quit smoking. Over half of vapers reported using a lower level of nicotine in their current e-liquid than when they started using e-cigarettes. There was a wide variety in products and price ranges between the shops. Many staff reported that customers ask for information about quitting smoking (90%). Less than half reported providing smoking cessation advice, although 76% of staff reported feeling confident about delivering cessation advice to customers who ask for it. Just under half of customers and shop staff said they thought it was appropriate to deliver formal in-store smoking cessation support. The majority of vape shop customers are vapers who have quit smoking. Shop staff play a central role in providing customers with product information, and many provide smoking cessation advice. Further research is needed to investigate the potential for smoking cessation interventions in vape shops, including the extent to which these would appeal to non-vapers.

Improved teaching-learning-based and JAYA optimization algorithms for solving flexible flow shop scheduling problems

Science.gov (United States)

Buddala, Raviteja; Mahapatra, Siba Sankar

2017-11-01

Flexible flow shop (or a hybrid flow shop) scheduling problem is an extension of classical flow shop scheduling problem. In a simple flow shop configuration, a job having `g' operations is performed on `g' operation centres (stages) with each stage having only one machine. If any stage contains more than one machine for providing alternate processing facility, then the problem becomes a flexible flow shop problem (FFSP). FFSP which contains all the complexities involved in a simple flow shop and parallel machine scheduling problems is a well-known NP-hard (Non-deterministic polynomial time) problem. Owing to high computational complexity involved in solving these problems, it is not always possible to obtain an optimal solution in a reasonable computation time. To obtain near-optimal solutions in a reasonable computation time, a large variety of meta-heuristics have been proposed in the past. However, tuning algorithm-specific parameters for solving FFSP is rather tricky and time consuming. To address this limitation, teaching-learning-based optimization (TLBO) and JAYA algorithm are chosen for the study because these are not only recent meta-heuristics but they do not require tuning of algorithm-specific parameters. Although these algorithms seem to be elegant, they lose solution diversity after few iterations and get trapped at the local optima. To alleviate such drawback, a new local search procedure is proposed in this paper to improve the solution quality. Further, mutation strategy (inspired from genetic algorithm) is incorporated in the basic algorithm to maintain solution diversity in the population. Computational experiments have been conducted on standard benchmark problems to calculate makespan and computational time. It is found that the rate of convergence of TLBO is superior to JAYA. From the results, it is found that TLBO and JAYA outperform many algorithms reported in the literature and can be treated as efficient methods for solving the FFSP.

A bi-criteria M-machine SDST flow shop scheduling using modified ...

African Journals Online (AJOL)

user

In the present work, a modified heuristic based genetic algorithm ..... Due to the large search space in flow shop scheduling, it is expected that random generation ..... ergonomics, anthropometry, inventory management and quality control etc.

A tabu search algorithm for scheduling a single robot in a job-shop environment

NARCIS (Netherlands)

Hurink, Johann L.; Knust, S.

1999-01-01

We consider a single-machine scheduling problem which arises as a subproblem in a job-shop environment where the jobs have to be transported between the machines by a single transport robot. The robot scheduling problem may be regarded as a generalization of the travelling-salesman problem with time

A tabu search algorithm for scheduling a single robot in a job-shop environment

NARCIS (Netherlands)

Hurink, Johann L.; Knust, Sigrid

2002-01-01

We consider a single-machine scheduling problem which arises as a subproblem in a job-shop environment where the jobs have to be transported between the machines by a single transport robot. The robot scheduling problem may be regarded as a generalization of the travelling-salesman problem with time

Job shop scheduling problem with late work criterion

Science.gov (United States)

Piroozfard, Hamed; Wong, Kuan Yew

2015-05-01

Scheduling is considered as a key task in many industries, such as project based scheduling, crew scheduling, flight scheduling, machine scheduling, etc. In the machine scheduling area, the job shop scheduling problems are considered to be important and highly complex, in which they are characterized as NP-hard. The job shop scheduling problems with late work criterion and non-preemptive jobs are addressed in this paper. Late work criterion is a fairly new objective function. It is a qualitative measure and concerns with late parts of the jobs, unlike classical objective functions that are quantitative measures. In this work, simulated annealing was presented to solve the scheduling problem. In addition, operation based representation was used to encode the solution, and a neighbourhood search structure was employed to search for the new solutions. The case studies are Lawrence instances that were taken from the Operations Research Library. Computational results of this probabilistic meta-heuristic algorithm were compared with a conventional genetic algorithm, and a conclusion was made based on the algorithm and problem.

Reliability of the hospital nutrition environment scan for cafeterias, vending machines, and gift shops.

Science.gov (United States)

Winston, Courtney P; Sallis, James F; Swartz, Michael D; Hoelscher, Deanna M; Peskin, Melissa F

2013-08-01

According to ecological models, the physical environment plays a major role in determining individual health behaviors. As such, researchers have started targeting the consumer nutrition environment of large-scale foodservice operations when implementing obesity-prevention programs. In 2010, the American Hospital Association released a call-to-action encouraging health care facilities to join in this movement and improve their facilities' consumer nutrition environments. The Hospital Nutrition Environment Scan (HNES) for Cafeterias, Vending Machines, and Gift Shops was developed in 2011, and the present study evaluated the inter-rater reliability of this instrument. Two trained raters visited 39 hospitals in southern California and completed the HNES. Percent agreement, kappa statistics, and intraclass correlation coefficients were calculated. Percent agreement between raters ranged from 74.4% to 100% and kappa statistics ranged from 0.458 to 1.0. The intraclass correlation coefficient for the overall nutrition composite scores was 0.961. Given these results, the HNES demonstrated acceptable reliability metrics and can now be disseminated to assess the current state of hospital consumer nutrition environments. Copyright © 2013 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Virtual machining considering dimensional, geometrical and tool deflection errors in three-axis CNC milling machines

OpenAIRE

Soori, Mohsen; Arezoo, Behrooz; Habibi, Mohsen

2014-01-01

Virtual manufacturing systems can provide useful means for products to be manufactured without the need of physical testing on the shop floor. As a result, the time and cost of part production can be decreased. There are different error sources in machine tools such as tool deflection, geometrical deviations of moving axis and thermal distortions of machine tool structures. Some of these errors can be decreased by controlling the machining process and environmental parameters. However other e...

Virtual machining considering dimensional, geometrical and tool deflection errors in three-axis CNC milling machines

OpenAIRE

Soori, Mohsen; Arezoo, Behrooz; Habibi, Mohsen

2016-01-01

Virtual manufacturing systems can provide useful means for products to be manufactured without the need of physical testing on the shop floor. As a result, the time and cost of part production can be decreased. There are different error sources in machine tools such as tool deflection, geometrical deviations of moving axis and thermal distortions of machine tool structures. Some of these errors can be decreased by controlling the machining process and environmental parameters. However other e...

A combined experimental and numerical study on upper airway dosimetry of inhaled nanoparticles from an electrical discharge machine shop.

Science.gov (United States)

Tian, Lin; Shang, Yidan; Chen, Rui; Bai, Ru; Chen, Chunying; Inthavong, Kiao; Tu, Jiyuan

2017-07-12

Exposure to nanoparticles in the workplace is a health concern to occupational workers with increased risk of developing respiratory, cardiovascular, and neurological disorders. Based on animal inhalation study and human lung tumor risk extrapolation, current authoritative recommendations on exposure limits are either on total mass or number concentrations. Effects of particle size distribution and the implication to regional airway dosages are not elaborated. Real time production of particle concentration and size distribution in the range from 5.52 to 98.2 nm were recorded in a wire-cut electrical discharge machine shop (WEDM) during a typical working day. Under the realistic exposure condition, human inhalation simulations were performed in a physiologically realistic nasal and upper airway replica. The combined experimental and numerical study is the first to establish a realistic exposure condition, and under which, detailed dose metric studies can be performed. In addition to mass concentration guided exposure limit, inhalation risks to nano-pollutant were reexamined accounting for the actual particle size distribution and deposition statistics. Detailed dosimetries of the inhaled nano-pollutants in human nasal and upper airways with respect to particle number, mass and surface area were discussed, and empirical equations were developed. An astonishing enhancement of human airway dosages were detected by current combined experimental and numerical study in the WEDM machine shop. Up to 33 folds in mass, 27 folds in surface area and 8 folds in number dosages were detected during working hours in comparison to the background dosimetry measured at midnight. The real time particle concentration measurement showed substantial emission of nano-pollutants by WEDM machining activity, and the combined experimental and numerical study provided extraordinary details on human inhalation dosimetry. It was found out that human inhalation dosimetry was extremely sensitive

Cyclic flow shop scheduling problem with two-machine cells

Directory of Open Access Journals (Sweden)

Bożejko Wojciech

2017-06-01

Full Text Available In the paper a variant of cyclic production with setups and two-machine cell is considered. One of the stages of the problem solving consists of assigning each operation to the machine on which it will be carried out. The total number of such assignments is exponential. We propose a polynomial time algorithm finding the optimal operations to machines assignment.

Similarities and differences in pedestrian shopping behavior in emerging Chinese metropolises

NARCIS (Netherlands)

Zhu, W.; Wang, Donggen; Timmermans, H.J.P.; Saito, S.

2007-01-01

To give a general impression on the fast development of Chinese retailing, this paper reports a study on pedestrian shopping behavior in two city centers, East Nanjing Road and Wang Fujing Street in Shanghai and Beijing. Similarities and differences in pedestrian profiles, activities and movement

31. Introduction with adjacent production of foundry and rolling department of electrolysis shop

International Nuclear Information System (INIS)

Ivanov, A.V.

1993-01-01

The introduction with adjacent production of foundry and rolling department of electrolysis shop was conducted. The foundry machine was described. The chemical properties of aluminium for ferrous alloy production were defined.

Science Shops

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard

1999-01-01

The paper prsents the overall concept of science shops as practised in most of the European science shops and present the concept practised and some experience obtained at the Technical University of Denmark. An outline for the planning of new sceince shops is presented.......The paper prsents the overall concept of science shops as practised in most of the European science shops and present the concept practised and some experience obtained at the Technical University of Denmark. An outline for the planning of new sceince shops is presented....

No-Wait Job Shop Scheduling, a Constraint Propagation Approach

NARCIS (Netherlands)

Lennartz, P.M.

2006-01-01

Multi-machine scheduling problems have earned themselves a reputation of intractability. In this thesis we try to solve a special kind of these problems, the so-called no-wait job shop problems. In an instance of this problem-class we are given a number of operations that are to be executed on a

Avaliação de regras de sequenciamento da produção em ambientes Job shop e Flow shop por meio de simulação computacional

Directory of Open Access Journals (Sweden)

Edna Barbosa da Silva

2012-01-01

Full Text Available In this work, the computational simulation is employed to study the effects of production sequencing rules in the performance of Job shop and Flow shop manufacturing environments. Eight sequencing rules were considered: SIPT (Shortest Imminent Processing Time, EDD (Earliest Due Date, DLS (Dynamic Least Slack, LWQ (Least Work in next Queue, FIFO (First In First Out, LIFO (Last In Last Out, CR (Critical Ratio and LS (Least Slack. These different sequencing rules were evaluated in relation to the makespan, total tardiness and number of tardy jobs, considering an experimental scenario which includes two configurations with eight machines (processes and ten different types of orders. A simulation model was developed with Arena software, incorporating randomness of order arrivals and the production times in such environments. The results show that the EDD and SIPT rules presented the best performances in the Job shop and in the Flow shop environments, respectively.

Eyes Wide Shopped: Shopping Situations Trigger Arousal in Impulsive Buyers

Science.gov (United States)

Serfas, Benjamin G.; Büttner, Oliver B.; Florack, Arnd

2014-01-01

The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures. PMID:25489955

Eyes wide shopped: shopping situations trigger arousal in impulsive buyers.

Science.gov (United States)

Serfas, Benjamin G; Büttner, Oliver B; Florack, Arnd

2014-01-01

The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures.

A hybrid algorithm for flexible job-shop scheduling problem with setup times

Directory of Open Access Journals (Sweden)

Ameni Azzouz

2017-01-01

Full Text Available Job-shop scheduling problem is one of the most important fields in manufacturing optimization where a set of n jobs must be processed on a set of m specified machines. Each job consists of a specific set of operations, which have to be processed according to a given order. The Flexible Job Shop problem (FJSP is a generalization of the above-mentioned problem, where each operation can be processed by a set of resources and has a processing time depending on the resource used. The FJSP problems cover two difficulties, namely, machine assignment problem and operation sequencing problem. This paper addresses the flexible job-shop scheduling problem with sequence-dependent setup times to minimize two kinds of objectives function: makespan and bi-criteria objective function. For that, we propose a hybrid algorithm based on genetic algorithm (GA and variable neighbourhood search (VNS to solve this problem. To evaluate the performance of our algorithm, we compare our results with other methods existing in literature. All the results show the superiority of our algorithm against the available ones in terms of solution quality.

Analysis of performance measures to handle medical E-commerce shopping cart abandonment in cloud

Directory of Open Access Journals (Sweden)

Vedhanayagam Priya

Full Text Available The E-commerce zone is crowded with many Internet users. Medical E-commerce has had significant growth in part because of a great deal of growth in the Indian E-commerce field. Medical E-commerce sites use cloud computing to guarantee a high quality of service anywhere and anytime in the world. For online access, the customer's expectations are very high. Medical E-commerce retailers are directed towards cloud service providers based on their quality of service. During online shopping, impatient customers may abandon a specific medical E-commerce shopping cart due to slow response. This is quite difficult to endure for a medical E-commerce firm. The research described herein observed the effect of shopping cart abandonment on medical E-commerce websites deployed in cloud computing. The impact of the idle virtual machine on customer impatience during medical E-commerce shopping was also studied. The ultimate aim of this study was to propose a stochastic queueing model and to yield results through probability generating functions. The results of the model may be highly useful for a medical E-commerce firm facing customer impatience, so as to design its service system to offer satisfactory quality of service. Keywords: Cloud computing, Queueing, Virtual machine, E-commerce, Cart abandonment, Quality of Service

Eyes wide shopped: shopping situations trigger arousal in impulsive buyers.

Directory of Open Access Journals (Sweden)

Benjamin G Serfas

Full Text Available The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures.

Machine en Theater. Ontwerpconcepten van winkelgebouwen

OpenAIRE

Kooijman, D.C.

1999-01-01

Machine and Theater, Design Concepts for Shop Buildings is a richly illustrated study of the architectural and urban development of retail buildings, focusing on six essential shop types: the passage and the department store in particular in Germany and France in the nineteenth century; supermarkets and malls and their relation to the suburbanisation and the emerging car use; and the peripheral retail park and location-free virtual store as the most recent developments. On the basis of a larg...

Shopping intention prediction using decision trees

Directory of Open Access Journals (Sweden)

Dario Šebalj

2017-09-01

Full Text Available Introduction: The price is considered to be neglected marketing mix element due to the complexity of price management and sensitivity of customers on price changes. It pulls the fastest customer reactions to that change. Accordingly, the process of making shopping decisions can be very challenging for customer. Objective: The aim of this paper is to create a model that is able to predict shopping intention and classify respondents into one of the two categories, depending on whether they intend to shop or not. Methods: Data sample consists of 305 respondents, who are persons older than 18 years involved in buying groceries for their household. The research was conducted in February 2017. In order to create a model, the decision trees method was used with its several classification algorithms. Results: All models, except the one that used RandomTree algorithm, achieved relatively high classification rate (over the 80%. The highest classification accuracy of 84.75% gave J48 and RandomForest algorithms. Since there is no statistically significant difference between those two algorithms, authors decided to choose J48 algorithm and build a decision tree. Conclusions: The value for money and price level in the store were the most significant variables for classification of shopping intention. Future study plans to compare this model with some other data mining techniques, such as neural networks or support vector machines since these techniques achieved very good accuracy in some previous research in this field.

REDUCING LEAD TIME USING FUZZY LOGIC AT JOB SHOP

Directory of Open Access Journals (Sweden)

EMİN GÜNDOĞAR

2000-06-01

Full Text Available One problem encountering at the job shop scheduling is minimum production size of machine is different from each another. This case increases lead time. A new approach was improved to reduce lead time. In this new approach, the parts, which materials are in stock and orders coming very frequently are assigned to machine to reduce lead time. Due the fact that there are a lot of machine and orders, it is possible to become so1ne probletns. In this paper, fuzzy logic is used to cope with this problem. New approach was simulated at the job sop that has owner 15 machinery and 50 orders. Simulation results showed that new approach reduced lead time between 27.89% and 32.36o/o

Multiagent scheduling method with earliness and tardiness objectives in flexible job shops.

Science.gov (United States)

Wu, Zuobao; Weng, Michael X

2005-04-01

Flexible job-shop scheduling problems are an important extension of the classical job-shop scheduling problems and present additional complexity. Such problems are mainly due to the existence of a considerable amount of overlapping capacities with modern machines. Classical scheduling methods are generally incapable of addressing such capacity overlapping. We propose a multiagent scheduling method with job earliness and tardiness objectives in a flexible job-shop environment. The earliness and tardiness objectives are consistent with the just-in-time production philosophy which has attracted significant attention in both industry and academic community. A new job-routing and sequencing mechanism is proposed. In this mechanism, two kinds of jobs are defined to distinguish jobs with one operation left from jobs with more than one operation left. Different criteria are proposed to route these two kinds of jobs. Job sequencing enables to hold a job that may be completed too early. Two heuristic algorithms for job sequencing are developed to deal with these two kinds of jobs. The computational experiments show that the proposed multiagent scheduling method significantly outperforms the existing scheduling methods in the literature. In addition, the proposed method is quite fast. In fact, the simulation time to find a complete schedule with over 2000 jobs on ten machines is less than 1.5 min.

Permutation flow-shop scheduling problem to optimize a quadratic objective function

Science.gov (United States)

Ren, Tao; Zhao, Peng; Zhang, Da; Liu, Bingqian; Yuan, Huawei; Bai, Danyu

2017-09-01

A flow-shop scheduling model enables appropriate sequencing for each job and for processing on a set of machines in compliance with identical processing orders. The objective is to achieve a feasible schedule for optimizing a given criterion. Permutation is a special setting of the model in which the processing order of the jobs on the machines is identical for each subsequent step of processing. This article addresses the permutation flow-shop scheduling problem to minimize the criterion of total weighted quadratic completion time. With a probability hypothesis, the asymptotic optimality of the weighted shortest processing time schedule under a consistency condition (WSPT-CC) is proven for sufficiently large-scale problems. However, the worst case performance ratio of the WSPT-CC schedule is the square of the number of machines in certain situations. A discrete differential evolution algorithm, where a new crossover method with multiple-point insertion is used to improve the final outcome, is presented to obtain high-quality solutions for moderate-scale problems. A sequence-independent lower bound is designed for pruning in a branch-and-bound algorithm for small-scale problems. A set of random experiments demonstrates the performance of the lower bound and the effectiveness of the proposed algorithms.

Gold-decorated shopping centre; Golddekoriertes Shopping Center

Energy Technology Data Exchange (ETDEWEB)

Altmannshofer, Robert

2010-11-15

In the autumn 2009, the German quality seal sustainable construction for commercial new buildings was introduced. Thus, owners and operators of retail real estate and shopping centres can make clear their commitment in the matter of sustainability. The Ernst-August-Galerie (Hanover, Federal Republic of Germany) developed and operated by ECE Projektmanagement GmbH and Co. KG (Hamburg, Federal Republic of Germany) was a pilot project and also the first gold in one. With its around 150 shops, the Ernst-August-Galerie offers a supermarket, fashion outlets, a food court, service outlets and restaurants/cafes. The spacious and elegantly designed shopping mall with its piazzas and light-flooded rotundas exudes a Mediterranean air, making it a high-quality venue for shopping, strolling and leisure activities.

Comparison Shopping Agents and Czech Online Customers’ Shopping Behaviour

Directory of Open Access Journals (Sweden)

Pilik Michal

2016-12-01

Full Text Available The internet has changed the lifestyles and shopping behaviours of customers. Online purchasing enables people to obtain information about products and services provided more effectively and easily, with the result that home shopping has become ordinary and usual. This paper presents part of a research focusing on online shopping customers’ behaviour in the Czech Republic. The article pertains to comparison shopping agents (CPAs, a tool which provides information to customers and helps find the best offer. The research was conducted on the basis of an online questionnaire available on an internet web page. The main results confirmed a dependency between online purchasing and the use of shopping agents, which are very popular in the Czech Republic. Almost two-thirds of online shoppers use CPAs when they engage in internet shopping. The final part of the paper addresses references and customers’ reviews as an important factor for the selection of online retailer.

Shopping Centres and Selected Aspects of Shopping Behaviour (Brno, the Czech Republic)

Czech Academy of Sciences Publication Activity Database

Kunc, J.; Tonev, P.; Szczyrba, Z.; Frantál, Bohumil

2012-01-01

Roč. 7, č. 2 (2012), s. 39-51 ISSN 2065-4421 Institutional support: RVO:68145535 Keywords : shopping centres * shopping habits * commuting to retail shops Subject RIV: AO - Sociology, Demography http://technicalgeography.org/pdf/2_2012/05_josef_kunc_petr_tonev_zdenek_szczyrba_bohumil_frantal_shopping_centres_and_selected_aspects_of_shopping_behaviour.pdf

MULTICRITERIA HYBRID FLOW SHOP SCHEDULING PROBLEM: LITERATURE REVIEW, ANALYSIS, AND FUTURE RESEARCH

Directory of Open Access Journals (Sweden)

Marcia de Fatima Morais

2014-12-01

Full Text Available This research focuses on the Hybrid Flow Shop production scheduling problem, which is one of the most difficult problems to solve. The literature points to several studies that focus the Hybrid Flow Shop scheduling problem with monocriteria functions. Despite of the fact that, many real world problems involve several objective functions, they can often compete and conflict, leading researchers to concentrate direct their efforts on the development of methods that take consider this variant into consideration. The goal of the study is to review and analyze the methods in order to solve the Hybrid Flow Shop production scheduling problem with multicriteria functions in the literature. The analyses were performed using several papers that have been published over the years, also the parallel machines types, the approach used to develop solution methods, the type of method develop, the objective function, the performance criterion adopted, and the additional constraints considered. The results of the reviewing and analysis of 46 papers showed opportunities for future research on this topic, including the following: (i use uniform and dedicated parallel machines, (ii use exact and metaheuristics approaches, (iv develop lower and uppers bounds, relations of dominance and different search strategies to improve the computational time of the exact methods,  (v develop  other types of metaheuristic, (vi work with anticipatory setups, and (vii add constraints faced by the production systems itself.

Near-Optimal Heuristics for Just-In-Time Jobs Maximization in Flow Shop Scheduling

Directory of Open Access Journals (Sweden)

Helio Yochihiro Fuchigami

2018-04-01

Full Text Available The number of just-in-time jobs maximization in a permutation flow shop scheduling problem is considered. A mixed integer linear programming model to represent the problem as well as solution approaches based on enumeration and constructive heuristics were proposed and computationally implemented. Instances with up to 10 jobs and five machines are solved by the mathematical model in an acceptable running time (3.3 min on average while the enumeration method consumes, on average, 1.5 s. The 10 constructive heuristics proposed show they are practical especially for large-scale instances (up to 100 jobs and 20 machines, with very good-quality results and efficient running times. The best two heuristics obtain near-optimal solutions, with only 0.6% and 0.8% average relative deviations. They prove to be better than adaptations of the NEH heuristic (well-known for providing very good solutions for makespan minimization in flow shop for the considered problem.

Factors Influencing Consumer Behavior Towards Online Shopping in Saudi Arabia

Directory of Open Access Journals (Sweden)

Hani A

2015-08-01

Full Text Available This study intends to identify factors that may affect consumer behavior in Saudi Arabia while shopping online. Although Saudi Arabia has the largest and fastest growing ICT in the Middle East and the online shopping activities in Saudi are increasing rapidly, it is still lagging behind the global development. The four factors–website design quality, perceived trust, perceived convenience and advertisements & promotions were selected from the available literature. A survey was conducted and questionnaire that includes 25 questions was distributed randomly to a sample of 107 participants in Dammam city (in the Eastern Province of the kingdom. The collected data was analyzed by using SPSS software. The result indicates one hypothesis has been accepted. The findings of the study are analyzed and discussed further at the end of this paper.

ShopComm: Community-Supported Online Shopping for Older Adults.

Science.gov (United States)

Gorkovenko, Katerina; Tigwell, Garreth W; Norrie, Christopher S; Waite, Miriam; Herron, Daniel

2017-01-01

The United Kingdom has an ageing population whose members experience significant life transitions as they grow older, for example, losing mobility due to deteriorating health. For these adults, digital technology has the potential to sustain their independence and improve their quality of life. However older adults can be reluctant to use digital solutions. In this paper, we review a local charity providing a grocery shopping service for older adults who are unable to go themselves. We explore how older adults perceive the benefits and drawbacks of both physical and digital shopping. Using these insights, we designed ShopComm to enable and support older adults with mobility impairments to shop online.

Machine Shop. Module 8: CNC (Computerized Numerical Control). Instructor's Guide.

Science.gov (United States)

Crosswhite, Dwight

This document consists of materials for a five-unit course on the following topics: (1) safety guidelines; (2) coordinates and dimensions; (3) numerical control math; (4) programming for numerical control machines; and (5) setting and operating the numerical control machine. The instructor's guide begins with a list of competencies covered in the…

Omni channel fashion shopping

NARCIS (Netherlands)

Kemperman, A.D.A.M.; van Delft, L.; Borgers, A.W.J.; Pantano, E.

2015-01-01

This chapter gives insight into consumers' online and offline fashion shopping behavior, consumers' omni-channel usage during the shopping process, and consumer fashion shopper segments. Based on a literature review, omni-channel shopping behavior during the shopping process was operationalized.

ATTITUDES TOWARD ONLINE SHOPPING FROM THE ASPECTS OF PERSONAL CHARACTERISTICS AND SHOPPING MOTIVE THROUGH A DEVELOPING CONCEPT: PRIVATE SHOPPING

OpenAIRE

BAYBARS, Miray; USTUNDAGLI, Elif

2011-01-01

Private shopping is one of the concepts that serve as a members-only online shopping platform with deep discounts and well-known brands. The aim of this paper is to determine whether consumers’ need for uniqueness and innovativeness as a personal trait and price discount orientation affect consumer attitudes toward private shopping and their purchase decision or not. Research results revealed that need for uniqueness and innovativeness affect positive attitudes towards private shopping positi...

Supporting the Supermarket Shopping Experience through a Context-Aware Shopping Trolley

DEFF Research Database (Denmark)

Black, Darren; Clemmensen, Nils Jakob; Skov, Mikael B.

2009-01-01

Shopping in the real world is becoming an increasingly interactive experience as stores integrate various technologies to support shoppers. Based on an empirical study of supermarket shoppers, we designed a mobile context-aware system called the Context- Aware Shopping Trolley (CAST). The aim...... of the system is to support shopping in supermarkets through context-awareness and acquiring user attention. Thus, the interactive trolley guides and directs shoppers in the handling and finding of groceries. An empirical evaluation showed that shoppers using CAST adapted in different shopping behavior than...... traditional trolley shoppers by exhibiting a more uniform behavior in terms of product sequence collection and ease of finding products and thus, CAST supported the shopping experience....

Flexible Job Shop Scheduling Problem Using an Improved Ant Colony Optimization

Directory of Open Access Journals (Sweden)

Lei Wang

2017-01-01

Full Text Available As an extension of the classical job shop scheduling problem, the flexible job shop scheduling problem (FJSP plays an important role in real production systems. In FJSP, an operation is allowed to be processed on more than one alternative machine. It has been proven to be a strongly NP-hard problem. Ant colony optimization (ACO has been proven to be an efficient approach for dealing with FJSP. However, the basic ACO has two main disadvantages including low computational efficiency and local optimum. In order to overcome these two disadvantages, an improved ant colony optimization (IACO is proposed to optimize the makespan for FJSP. The following aspects are done on our improved ant colony optimization algorithm: select machine rule problems, initialize uniform distributed mechanism for ants, change pheromone’s guiding mechanism, select node method, and update pheromone’s mechanism. An actual production instance and two sets of well-known benchmark instances are tested and comparisons with some other approaches verify the effectiveness of the proposed IACO. The results reveal that our proposed IACO can provide better solution in a reasonable computational time.

An economic lot and delivery scheduling problem with the fuzzy shelf life in a flexible job shop with unrelated parallel machines

Directory of Open Access Journals (Sweden)

S. Dousthaghi

2012-08-01

Full Text Available This paper considers an economic lot and delivery scheduling problem (ELDSP in a fuzzy environment with the fuzzy shelf life for each product. This problem is formulated in a flexible job shop with unrelated parallel machines, when the planning horizon is finite and it determines lot sizing, scheduling and sequencing, simultaneously. The proposed model of this paper is based on the basic period (BP approach. In this paper, a mixed-integer nonlinear programming (MINLP model is presented and then it is changed into two models in the fuzzy shelf life. The main model is dependent to the multiple basic periods and it is difficult to solve the resulted proposed model for large-scale problems in reasonable amount of time; thus, an efficient heuristic method is proposed to solve the problem. The performance of the proposed model is demonstrated using some numerical examples.

Shopping online and/or in-store? A structural equation model of the relationships between e-shopping and in-store shopping

OpenAIRE

Farag, Sendy; Schwanen, Tim; Dijst, Martin

2005-01-01

Searching product information or buying goods online is becoming increasingly popular and could affect shopping trips. However, the relationship between e-shopping and in-store shopping is currently unclear. The aim of this study is to investigate empirically how the frequencies of online searching, online buying, and non-daily shopping trips relate to each other, after controlling for sociodemographic, land use, behavioral, and attitudinal characteristics. Data were collected from 826 respon...

Implementation of Real-Time Machining Process Control Based on Fuzzy Logic in a New STEP-NC Compatible System

Directory of Open Access Journals (Sweden)

Po Hu

2016-01-01

Full Text Available Implementing real-time machining process control at shop floor has great significance on raising the efficiency and quality of product manufacturing. A framework and implementation methods of real-time machining process control based on STEP-NC are presented in this paper. Data model compatible with ISO 14649 standard is built to transfer high-level real-time machining process control information between CAPP systems and CNC systems, in which EXPRESS language is used to define new STEP-NC entities. Methods for implementing real-time machining process control at shop floor are studied and realized on an open STEP-NC controller, which is developed using object-oriented, multithread, and shared memory technologies conjunctively. Cutting force at specific direction of machining feature in side mill is chosen to be controlled object, and a fuzzy control algorithm with self-adjusting factor is designed and embedded in the software CNC kernel of STEP-NC controller. Experiments are carried out to verify the proposed framework, STEP-NC data model, and implementation methods for real-time machining process control. The results of experiments prove that real-time machining process control tasks can be interpreted and executed correctly by the STEP-NC controller at shop floor, in which actual cutting force is kept around ideal value, whether axial cutting depth changes suddenly or continuously.

Resource Conservation and Recovery Act closure report: Area 2 Bitcutter and Postshot Containment Shops Injection Wells, Correction Action Unit 90

International Nuclear Information System (INIS)

1996-12-01

This Closure Report provides documentation of the activities conducted during the Resource Conservation and Recovery Act (RCRA) closure of the Bitcutter and Postshot Containment Shops Injection Wells located in Area 2 of the Nevada Test Site (NTS), Oak Spring Quadrangle (USGS, 1986), Township 10 South, Range 53 East, Nye County, Nevada. This report discusses the Bitcutter Shop Inside Injection Well (CAU 90-A) closure-in-place and the Bitcutter Shop Outside Injection Well (CAU 90-B) and Postshot Containment Shop Injection Well (CAU 90-C) clean closures. This Closure Report provides background information about the unit, the results of the characterization activities and actions conducted to determine the closure design. It also provides a discussion of the drainage analysis, preliminary closure activities, final closure activities, waste management activities, and the Post-Closure Care requirements

Internet Shopping

Institute of Scientific and Technical Information of China (English)

刘洪毓

2004-01-01

Nowadays you no longer need to walk round hundreds of shops looking for the items you need. You can shop for just about anything from your armchair. All you need is a computer and access(进入) to the Internet.

THE INFLUENCE OF HEDONIC SHOPPING MOTIVATION TO THE IMPULSE BUYING OF ONLINE-SHOPPING CONSUMER ON INSTAGRAM

Directory of Open Access Journals (Sweden)

Asnawati

2018-02-01

Full Text Available This research aims to know the influence of Adventure Shopping, Relaxation Shopping, Value Shopping, Social Shopping and Idea Shopping variables to the variable of Impulse Buying of Online-Shopping Consumer on Instagram. The type of the research is explanatory research. The result of F-test showed that Fcount (12.829 > Ftable (2.669 which meant that research variables had influences to the Impulse Buying. With partial correlation value of 0.548, Idea Shopping variable became the dominant factor influencing Impulse Buying on the online-shopping purchase on Instagram.

Investigation of social shopping for fashion in apparel market of Tehran

OpenAIRE

MohammadRahim Esfidani; Mohsen Nazari; Maryam Karimi Davijani

2014-01-01

Social shopping behavior of fashion embraces various activities, direct/indirect complex and dynamic interpersonal happening during the process of buying fashion and causes customers’ pleasure and satisfaction from purchasing intention, which in long-term helps sales improvement. Market of fashion apparel in IRAN is the biggest consumer market in the Middle East. Despite this huge marke, marketing knowledge of fashion apparel in iran has not been developed yet. considering the nessecities of ...

Heuristics for batching and sequencing in batch processing machines

Directory of Open Access Journals (Sweden)

Chuda Basnet

2016-12-01

Full Text Available In this paper, we discuss the “batch processing” problem, where there are multiple jobs to be processed in flow shops. These jobs can however be formed into batches and the number of jobs in a batch is limited by the capacity of the processing machines to accommodate the jobs. The processing time required by a batch in a machine is determined by the greatest processing time of the jobs included in the batch. Thus, the batch processing problem is a mix of batching and sequencing – the jobs need to be grouped into distinct batches, the batches then need to be sequenced through the flow shop. We apply certain newly developed heuristics to the problem and present computational results. The contributions of this paper are deriving a lower bound, and the heuristics developed and tested in this paper.

THE INFLUENCE OF HEDONIC SHOPPING MOTIVATION TO THE IMPULSE BUYING OF ONLINE-SHOPPING CONSUMER ON INSTAGRAM

OpenAIRE

Asnawati; Wahyuni S.

2018-01-01

This research aims to know the influence of Adventure Shopping, Relaxation Shopping, Value Shopping, Social Shopping and Idea Shopping variables to the variable of Impulse Buying of Online-Shopping Consumer on Instagram. The type of the research is explanatory research. The result of F-test showed that Fcount (12.829) > Ftable (2.669) which meant that research variables had influences to the Impulse Buying. With partial correlation value of 0.548, Idea Shopping variable became the dominant fa...

Shopping Malls - ShoppingCenters

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Collected from a variety of sources both commercial and internal, this layer represents shopping center locations within Volusia County and is maintained by the...

Female Consumers Recreational Shopping Experiences

Directory of Open Access Journals (Sweden)

Sarbjot Singh

2013-04-01

Full Text Available The study examines the core meaning of intrinsic shopping to understand their experimental aspects of recreational and leisure shopping. The study focus only on female shoppers of age group ranging from 25-30, and understand their mall experiences because this segment is newly transform into self dependent segment which have less social and familial liabilities and have enough enthusiasm to explore the world or their boundaries. The Grounded theory use for identification of recreational shopping themes which are (a seeking experiences and (b experimental shopping and each have respective sub themes. The themes are connected to the key idea that shoppers are motivated by their expectations and desires. The study uses social constructivism to find and understand the shopper meanings in real terms rather than imposing and judgment on them. The findings described the way people do recreational shopping and how shopping malls use as leisure space and become facilitators of recreational shopping activities. Females use malls to fulfill their recreational and leisure shopping experiences as this is the great way of enjoying shopping for females of small towns. In malls females not only enjoy product experiences but services experiences also which makes their shopping interesting. The way the female of this age category use malls help the marketers and retailers to understand this segment shopping patterns.

The Virtual Shopping Experience: using virtual presence to motivate online shopping

Directory of Open Access Journals (Sweden)

Carolyn Chin

2005-11-01

Full Text Available Online shopping has thus far tended to be a niche business – highly successful in selling digital products such as shares, software and, increasingly, music and films, it has been less successful in persuading the purchasers of ‘traditional’ goods such as cars, clothes, toiletries, or household appliances to forsake their physical retailers and move into cyberspace. In this wide-ranging review paper we investigate the issue of the virtual experience – endeavouring to understand what is needed for a successful ‘shopping experience’ online and what the possible obstacles or pitfalls along the way might be. We initially introduce the concepts of virtual presence (the sense of ‘being there’ and virtual reality, discussing the possible roles both can play in providing a solution to the problem of effective online shopping. We then consider the Experience Economy, a concept which encapsulates many of the issues related to the problem of online shopping and which suggests ways in which online retailers can enhance the effectiveness of their sites by means of a virtual ‘experience’. Having set the scene for online shopping, we discuss eTailing today in terms of direct product experience and the opportunities which cyber-shopping offers to replicate this process. Finally, we identify some of the possibilities and problems of online shopping today, illustrating the current status of virtual presence in retailing with two micro-cases of success and failure.

Evaluating the performance of constructive heuristics for the blocking flow shop scheduling problem with setup times

Directory of Open Access Journals (Sweden)

Mauricio Iwama Takano

2019-01-01

Full Text Available This paper addresses the minimization of makespan for the permutation flow shop scheduling problem with blocking and sequence and machine dependent setup times, a problem not yet studied in previous studies. The 14 best known heuristics for the permutation flow shop problem with blocking and no setup times are pre-sented and then adapted to the problem in two different ways; resulting in 28 different heuristics. The heuristics are then compared using the Taillard database. As there is no other work that addresses the problem with blocking and sequence and ma-chine dependent setup times, a database for the setup times was created. The setup time value was uniformly distributed between 1% and 10%, 50%, 100% and 125% of the processing time value. Computational tests are then presented for each of the 28 heuristics, comparing the mean relative deviation of the makespan, the computational time and the percentage of successes of each method. Results show that the heuristics were capable of providing interesting results.

Online Shopping Behavior

OpenAIRE

Shahzad, Hashim

2015-01-01

Online shopping is a very much developed phenomena in Scandinavian countries. Different online factors impact online consumers’ behavior differently depending on the environment of different regions. Sweden is one of the developed and technologically advanced countries. To see the impact of different factors on consumers’ online shopping behavior, the purpose of this study is to analyse the factors that influence consumers’ online shopping behavior in Sweden’s context. One of the objectives o...

Parallel patterns determination in solving cyclic flow shop problem with setups

Directory of Open Access Journals (Sweden)

Bożejko Wojciech

2017-06-01

Full Text Available The subject of this work is the new idea of blocks for the cyclic flow shop problem with setup times, using multiple patterns with different sizes determined for each machine constituting optimal schedule of cities for the traveling salesman problem (TSP. We propose to take advantage of the Intel Xeon Phi parallel computing environment during so-called ’blocks’ determination basing on patterns, in effect significantly improving the quality of obtained results.

Optimal Results and Numerical Simulations for Flow Shop Scheduling Problems

Directory of Open Access Journals (Sweden)

Tao Ren

2012-01-01

Full Text Available This paper considers the m-machine flow shop problem with two objectives: makespan with release dates and total quadratic completion time, respectively. For Fm|rj|Cmax, we prove the asymptotic optimality for any dense scheduling when the problem scale is large enough. For Fm‖ΣCj2, improvement strategy with local search is presented to promote the performance of the classical SPT heuristic. At the end of the paper, simulations show the effectiveness of the improvement strategy.

Customer experience with online shopping : what are the unique experiences customers seek from online shopping?

OpenAIRE

Jin, Daoyan

2013-01-01

Over the last decade, there has been a great change in consumers' shopping behavior along with technological change. Online shopping is the use of computer technology for better shopping performance. Retailers are busy in studying consumers' behavior to see their attitudes toward online shopping and to meet the demand of online shoppers. Due to my interest in online business, I have also decided to study about customers' attitudes toward online shopping and specifically regarding factors that...

EFFICIENT MULTI-OBJECTIVE EVOLUTIONARY ALGORITHM FOR JOB SHOP SCHEDULING

Institute of Scientific and Technical Information of China (English)

Lei Deming; Wu Zhiming

2005-01-01

A new representation method is first presented based on priority rules. According to this method, each entry in the chromosome indicates that in the procedure of the Giffler and Thompson (GT) algorithm, the conflict occurring in the corresponding machine is resolved by the corresponding priority rule. Then crowding-measure multi-objective evolutionary algorithm (CMOEA) is designed,in which both archive maintenance and fitness assignment use crowding measure. Finally the comparisons between CMOEA and SPEA in solving 15 scheduling problems demonstrate that CMOEA is suitable to job shop scheduling.

Integrating the sequence dependent setup time open shop problem and preventive maintenance policies

Directory of Open Access Journals (Sweden)

K. Naboureh

2016-09-01

Full Text Available In most industrial environments, it is usually considered that machines are accessible throughout the planning horizon, but in real situation, machines may be unavailable due to a scheduled preventive maintenance where the periods of unavailability are known in advance. The main idea of this paper is to consider different preventive maintenance policies on machines regarding open shop scheduling problem (OSSP with sequence dependent setup times (SDST using immune algorithm. The preventive maintenance (PM policies are planned for maximizing availability of machines or keeping minimum level of reliability through the production horizon. The objective function of the paper is to minimize makespan. In total, the proposed algorithm extensively is compared with six adaptations of existing heuristic and meta-heuristic methods for the problem through data sets from benchmarks based on Taillard’s instances with some adjustments. The results show that the proposed algorithm outperforms other algorithms for this problem.

GENDER AND SHOPPING BEHAVIOR OUTCOMES IN THE CONTEXT OF SHOPPING CENTERS

Directory of Open Access Journals (Sweden)

Ioana Nicoleta ABRUDAN

2016-09-01

Full Text Available Understanding consumer behavior can be divided into three parts: before visiting the stores or shopping centers, during the visit, and after. From the point of view of the final result intended by retailers, satisfying customers in terms of profitability, all three components are equally important. A relevant segmentation criterion for most products and stores is gender. Previous research suggests that gender influences shopping motivations, the way people shop and shopping behavior outcomes. The purpose of this article is to investigate if there are, indeed, differences between shopping behavior outputs of women and men (affective loyalty (satisfaction and conative loyalty, as found by certain researchers, and also in terms of the factors that influence the formation of conative loyalty. The results confirm that there are few significant differences in the satisfaction level, although for women all values are slightly higher, and none in the repurchase and recommendation intentions between the two genders. Conative loyalty formation (defined as intent to repurchase and recommend takes place differently between the two genders.

The East, the West and the universal machine.

Science.gov (United States)

Marchal, Bruno

2017-12-01

After reviewing the basic of theology of Universal Numbers/Machines, as detailed in Marchal (2007), I illustrate how that body of thought might be used to shed some light upon the apparent dichotomy in Eastern/Western spirituality. This paper relies entirely on my previous interdisciplinary work in mathematical logic, computer science and machine's theology, where "theology" is used here in the sense of Plato: it is the truth, or the "truth-theory" (in the sense of logicians) about a machine that the machine can either deduce from some of its primitive beliefs, or can be intuited in some sense that eventually is made clear through the modal logic of machine self-reference. Such a theology appears to be testable, because it has been shown that physics has to be necessarily retrieved from it when we assume the mechanist hypothesis in the cognitive sciences, and this in a unique precise (introspective) way, so that we only need to compare the physics of the introspective machine with the physics inferred from the human observation; and up to now, it is the only theory known to fit both the existence of personal "consciousness" (undoubtable yet unjustifiable truth) and quanta and quantum relationships (Marchal, 1998; Marchal, 2004; Marchal, 2013; Marchal, 2015). Copyright © 2017 Elsevier Ltd. All rights reserved.

Icing Detection over East Asia from Geostationary Satellite Data Using Machine Learning Approaches

Directory of Open Access Journals (Sweden)

Seongmun Sim

2018-04-01

Full Text Available Even though deicing or airframe coating technologies continue to develop, aircraft icing is still one of the critical threats to aviation. While the detection of potential icing clouds has been conducted using geostationary satellite data in the US and Europe, there is not yet a robust model that detects potential icing areas in East Asia. In this study, we proposed machine-learning-based icing detection models using data from two geostationary satellites—the Communication, Ocean, and Meteorological Satellite (COMS Meteorological Imager (MI and the Himawari-8 Advanced Himawari Imager (AHI—over Northeast Asia. Two machine learning techniques—random forest (RF and multinomial log-linear (MLL models—were evaluated with quality-controlled pilot reports (PIREPs as the reference data. The machine-learning-based models were compared to the existing models through five-fold cross-validation. The RF model for COMS MI produced the best performance, resulting in a mean probability of detection (POD of 81.8%, a mean overall accuracy (OA of 82.1%, and mean true skill statistics (TSS of 64.0%. One of the existing models, flight icing threat (FIT, produced relatively poor performance, providing a mean POD of 36.4%, a mean OA of 61.0, and a mean TSS of 9.7%. The Himawari-8 based models also produced performance comparable to the COMS models. However, it should be noted that very limited PIREP reference data were available especially for the Himawari-8 models, which requires further evaluation in the future with more reference data. The spatio-temporal patterns of the icing areas detected using the developed models were also visually examined using time-series satellite data.

Modeling the Hybrid Flow Shop Scheduling Problem Followed by an Assembly Stage Considering Aging Effects and Preventive Maintenance Activities

Directory of Open Access Journals (Sweden)

Seyyed Mohammad Hassan Hosseini

2016-05-01

Full Text Available Scheduling problem for the hybrid flow shop scheduling problem (HFSP followed by an assembly stage considering aging effects additional preventive and maintenance activities is studied in this paper. In this production system, a number of products of different kinds are produced. Each product is assembled with a set of several parts. The first stage is a hybrid flow shop to produce parts. All machines can process all kinds of parts in this stage but each machine can process only one part at the same time. The second stage is a single assembly machine or a single assembly team of workers. The aim is to schedule the parts on the machines and assembly sequence and also determine when the preventive maintenance activities get done in order to minimize the completion time of all products (makespan. A mathematical modeling is presented and its validation is shown by solving an example in small scale. Since this problem has been proved strongly NP-hard, in order to solve the problem in medium and large scale, four heuristic algorithms is proposed based on the Johnson’s algorithm. The numerical experiments are used to run the mathematical model and evaluate the performance of the proposed algorithms.

Solving the flexible job shop problem by hybrid metaheuristics-based multiagent model

Science.gov (United States)

Nouri, Houssem Eddine; Belkahla Driss, Olfa; Ghédira, Khaled

2018-03-01

The flexible job shop scheduling problem (FJSP) is a generalization of the classical job shop scheduling problem that allows to process operations on one machine out of a set of alternative machines. The FJSP is an NP-hard problem consisting of two sub-problems, which are the assignment and the scheduling problems. In this paper, we propose how to solve the FJSP by hybrid metaheuristics-based clustered holonic multiagent model. First, a neighborhood-based genetic algorithm (NGA) is applied by a scheduler agent for a global exploration of the search space. Second, a local search technique is used by a set of cluster agents to guide the research in promising regions of the search space and to improve the quality of the NGA final population. The efficiency of our approach is explained by the flexible selection of the promising parts of the search space by the clustering operator after the genetic algorithm process, and by applying the intensification technique of the tabu search allowing to restart the search from a set of elite solutions to attain new dominant scheduling solutions. Computational results are presented using four sets of well-known benchmark literature instances. New upper bounds are found, showing the effectiveness of the presented approach.

Handbook of machine soldering SMT and TH

CERN Document Server

Woodgate, Ralph W

1996-01-01

A shop-floor guide to the machine soldering of electronics Sound electrical connections are the operational backbone of every piece of electronic equipment-and the key to success in electronics manufacturing. The Handbook of Machine Soldering is dedicated to excellence in the machine soldering of electrical connections. Self-contained, comprehensive, and down-to-earth, it cuts through jargon, peels away outdated notions, and presents all the information needed to select, install, and operate machine soldering equipment. This fully updated and revised volume covers all of the new technologies and processes that have emerged in recent years, most notably the use of surface mount technology (SMT). Supplemented with 200 illustrations, this thoroughly accessible text Describes reflow and wave soldering in detail, including reflow soldering of SMT boards and the use of nitrogen blankets * Explains the setup, operation, and maintenance of a variety of soldering machines * Discusses theory, selection, and control met...

Online shopping hesitation.

Science.gov (United States)

Cho, Chang-Hoan; Kang, Jaewon; Cheon, Hongsik John

2006-06-01

This study was designed to understand which factors influence consumer hesitation or delay in online product purchases. The study examined four groups of variables (i.e., consumer characteristics, contextual factors perceived uncertainty factors, and medium/channel innovation factors) that predict three types of online shopping hesitation (i.e., overall hesitation, shopping cart abandonment, and hesitation at the final payment stage). We found that different sets of delay factors are related to different aspects of online shopping hesitation. The study concludes with suggestion for various delay-reduction devices to help consumers close their online decision hesitation.

The influences of social e-shopping in enhancing young women’s online shopping behaviour

OpenAIRE

Dennis, C; Morgan, A; Wright, LT; Jayawardhena, C

2010-01-01

Copyright @ 2010 Westburn Publishers Ltd The background to this paper is that shoppers, particularly women, are motivated by a variety of different reasons, including socialising and enjoyment. Despite the growth of Internet retailing (e-retailing), these social needs are largely unmet in e-shopping. In the high street, women do most of the shopping but online shopping (e-shopping) tends to be dominated by male shoppers. At the same time, social networking is growing fast and is especially...

M-machine SDST flow shop scheduling using modified heuristic ...

African Journals Online (AJOL)

A computational analysis has been made to evaluate the performance of the proposed MHGA for upto 200 jobs and 20 machines problems. Comparative analysis with the help of defined performance index known as relative percentage deviation (RPD) verifies that it is viable and effective approach when compared with ...

Supporting shop floor intelligence

DEFF Research Database (Denmark)

Carstensen, Peter; Schmidt, Kjeld; Wiil, Uffe Kock

1999-01-01

Many manufacturing enterprises are now trying to introduce various forms of flexible work organizations on the shop floor. However, existing computer-based production planning and control systems pose severe obstacles for autonomous working groups and other kinds of shop floor control to become r......-to-day production planning by supporting intelligent and responsible workers in their situated coordination activities on the shop floor....

Shopping Problems among High School Students

Science.gov (United States)

Grant, Jon E.; Potenza, Marc N.; Krishnan-Sarin, Suchitra; Cavallo, Dana A.; Desai, Rani A.

2010-01-01

Background Although shopping behavior among adolescents is normal, for some the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. Methods A large sample of high school students (n=3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. Results The overall prevalence of problem shopping was 3.5% (95%CI: 2.93–4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Conclusion Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. PMID:21497217

Shopping problems among high school students.

Science.gov (United States)

Grant, Jon E; Potenza, Marc N; Krishnan-Sarin, Suchitra; Cavallo, Dana A; Desai, Rani A

2011-01-01

Although shopping behavior among adolescents is normal, for some, the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. A large sample of high school students (n = 3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. The overall prevalence of problem shopping was 3.5% (95% CI, 2.93-4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. Copyright © 2011 Elsevier Inc. All rights reserved.

Machine for Shopping: American Postwar Malls, Culture, and the Consumption of Commercial Urbanism

OpenAIRE

Siegel, Robyn Schwartz

2011-01-01

This thesis presents three case studies: a modern mall, NorthPark Center, and two contemporary shopping malls, The Americana at Brand and Crystals at CityCenter. These examples problematize aspects of American culture and consumption. Each mall is analyzed in the context of its retail history, the intention of the architecture, the art, the references to other buildings, places, or times, and, lastly, how the commercial mall purports to embody positive forms of urbanity in an idealized city ...

A proposal simulated annealing algorithm for proportional parallel flow shops with separated setup times

Directory of Open Access Journals (Sweden)

Helio Yochihiro Fuchigami

2014-08-01

Full Text Available This article addresses the problem of minimizing makespan on two parallel flow shops with proportional processing and setup times. The setup times are separated and sequence-independent. The parallel flow shop scheduling problem is a specific case of well-known hybrid flow shop, characterized by a multistage production system with more than one machine working in parallel at each stage. This situation is very common in various kinds of companies like chemical, electronics, automotive, pharmaceutical and food industries. This work aimed to propose six Simulated Annealing algorithms, their perturbation schemes and an algorithm for initial sequence generation. This study can be classified as “applied research” regarding the nature, “exploratory” about the objectives and “experimental” as to procedures, besides the “quantitative” approach. The proposed algorithms were effective regarding the solution and computationally efficient. Results of Analysis of Variance (ANOVA revealed no significant difference between the schemes in terms of makespan. It’s suggested the use of PS4 scheme, which moves a subsequence of jobs, for providing the best percentage of success. It was also found that there is a significant difference between the results of the algorithms for each value of the proportionality factor of the processing and setup times of flow shops.

Zero waste machine coolant management strategy at Los Alamos National Laboratory

International Nuclear Information System (INIS)

Carlson, B.; Algarra, F.; Wilburn, D.

1998-01-01

Machine coolants are used in machining equipment including lathes, grinders, saws and drills. The purpose of coolants is to wash away machinery debris in the form of metal fines, lubricate, and disperse heat between the part and the machine tool. An effective coolant prolongs tool life and protects against part rejection, commonly due to scoring or scorching. Traditionally, coolants have a very short effective life in the machine, often times being disposed of as frequently as once per week. The cause of coolant degradation is primarily due to the effects of bacteria, which thrive in the organic rich coolant environment. Bacteria in this environment reproduce at a logarithmic rate, destroying the coolant desirable aspects and causing potential worker health risks associated with the use of biocides to control the bacteria. The strategy described in this paper has effectively controlled bacterial activity without the use of biocides, avoided disposal of a hazardous waste, and has extended coolant life indefinitely. The Machine Coolant Management Strategy employed a combination of filtration, heavy lubricating oil removal, and aeration, which maintained the coolant peak performance without the use of biocides. In FY96, the Laboratory generated and disposed of 19,880 kg of coolants from 9 separate sites at a cost of $145K. The single largest generator was the main machine shop producing an average 14,000 kg annually. However, in FY97, the waste generation for the main machine shop dropped to 4,000 kg after the implementation of the zero waste strategy. It is expected that this value will be further reduced in FY98

Binjai Shopping Mall : Arsitektur Metafora

OpenAIRE

Abadsyah, Haris

2014-01-01

City of Binjai have a potential to increase economic growth, especially in the field of trade and services.It can be seen from appearance of the commercial building like the shopping center ( Binjai Super Mall, Ramayana and Suzuya ) Construction of Binjai Shopping Mall intended for planning new shopping centers that provide public kebuthan in Binjai and well planned shopping center with optimal processing space and create a comfortable and pleasant atmosphere. In addition, the ...

Consumers’ Attitude towards Online Shopping : Factors influencing Gotland consumers to shop online

OpenAIRE

Sultan, Muhammad Umar; Uddin, Md. Nasir

2011-01-01

In the era of globalization electronic marketing is a great revolution.  Over the last decade maximum business organizations are running with technological change.  Online shopping or marketing is the use of technology (i.e., computer) for better marketing performance. And retailers are devising strategies to meet the demand of online shoppers; they are busy in studying consumer behavior in the field of online shopping, to see the consumer attitudes towards online shopping. Therefore we have ...

Efficient bounding schemes for the two-center hybrid flow shop scheduling problem with removal times.

Science.gov (United States)

Hidri, Lotfi; Gharbi, Anis; Louly, Mohamed Aly

2014-01-01

We focus on the two-center hybrid flow shop scheduling problem with identical parallel machines and removal times. The job removal time is the required duration to remove it from a machine after its processing. The objective is to minimize the maximum completion time (makespan). A heuristic and a lower bound are proposed for this NP-Hard problem. These procedures are based on the optimal solution of the parallel machine scheduling problem with release dates and delivery times. The heuristic is composed of two phases. The first one is a constructive phase in which an initial feasible solution is provided, while the second phase is an improvement one. Intensive computational experiments have been conducted to confirm the good performance of the proposed procedures.

Shopping in discount stores

DEFF Research Database (Denmark)

Zielke, Stephan

2014-01-01

quarters of intentions to shop in discount stores. Value perception has the strongest total effect, which is partly mediated by enjoyment, shame and guilt. Attributions influence the shopping intention indirectly via value perception and emotions. The inferior quality attribution has the strongest total......This paper analyzes the impact of price-related attributions, emotions and value perception on the intention to shop at grocery discounters in an integrated framework. Moderating effects of price consciousness are also analyzed. The results show that the proposed model explains almost three...... effect, followed by the efficiency of the business model attribution. The unfairness to stakeholders and the tricks in price communication attribution mostly influence the shopping intention for less price-conscious customers....

Vape Shop Employees: Public Health Advocates?

OpenAIRE

Hart, Joy L; Walker, Kandi L; Sears, Clara G; Lee, Alexander S; Smith, Courteney; Siu, Allison; Keith, Rachel; Ridner, S. Lee

2017-01-01

INTRODUCTION E-cigarettes have increased in popularity and given rise to a new type of sales outlet?the vape shop. Expanding on work examining vape shop employee e-cigarette and tobacco attitudes and behaviors 1 , this study examined key messages that vape shop employees communicate to customers. METHODS Using informal interviews, observations, and a cross-sectional survey, we examined vape shop employees? (n=16) perceptions and e-cigarette use. Data were collected in nine vape shops in Louis...

The Effects of Shopping Orientations, Consumer Innovativeness, Purchase Experience, and Gender on Intention to Shop for Fashion Products Online

Directory of Open Access Journals (Sweden)

Ratih Puspa Nirmala

2011-02-01

Full Text Available Nowadays, many fashion retailers or marketers use the power of internet to promote and sell their products. This research examines the effects of consumers’ shopping orientations (brand/fashion consciousness, shopping enjoyment, price consciousness, convenience/time consciousness, shopping confidence, in-home shopping tendency, consumer innovativeness, online purchase experience for fashion products, and gender on consumers’ intention to shop for fashion products online. Data were collected through online surveys from the population of internet users in Indonesia, aged between 15 and 30 years old (generation Y, who had bought or browsed fashion products through the internet (N=210. This research is a quantitative research which uses purposive sampling and multiple regression analysis. Results show that the effects of several shopping orientations (shopping enjoyment, price consciousness, in-home shopping tendency, consumer innovativeness, online purchase experience for fashion products, and gender, are significant on consumers’ intention to shop for fashion products online. Furthermore, gender is marginally significant related to consumers’ intention to shop for fashion products online. Surprisingly, women tend to have lower intentions to shop for fashion products online compared to men.

A review of scheduling problem and resolution methods in flexible flow shop

Directory of Open Access Journals (Sweden)

Tian-Soon Lee

2019-01-01

Full Text Available The Flexible flow shop (FFS is defined as a multi-stage flow shops with multiple parallel machines. FFS scheduling problem is a complex combinatorial problem which has been intensively studied in many real world industries. This review paper gives a comprehensive exploration review on the FFS scheduling problem and guides the reader by considering and understanding different environmental assumptions, system constraints and objective functions for future research works. The published papers are classified into two categories. First is the FFS system characteristics and constraints including the problem differences and limitation defined by different studies. Second, the scheduling performances evaluation are elaborated and categorized into time, job and multi related objectives. In addition, the resolution approaches that have been used to solve FFS scheduling problems are discussed. This paper gives a comprehensive guide for the reader with respect to future research work on the FFS scheduling problem.

THE DIFFERENCE OF MACHINING PROPERTIES OF TIMO (Timonius sericeus (Desf K. Schum. And KABESAK WOOD (Acacia leucophloea (Roxb. Willd. FROM EAST NUSA TENGGARA

Directory of Open Access Journals (Sweden)

Heny Rianawati

2015-09-01

Full Text Available Machining properties is one of the parameters to determine the quality of the wood. Tests on machining properties of wood are important to know the easiness level of workmanship as raw materials of furniture industry, construction wood and other wood products. This research was aimed at determining the difference of machining properties between timo wood (Timonius sericeus (Desf K. Schum. and kabesak wood (Acacia leucophloea (Roxb. Willd. from the village of Reknamo, Kupang district, East Nusa Tenggara. Testing procedures were based on ASTM D1666 including: planning, shaping, sanding, drilling and turning. The observation of qualities of the machining were done visually by calculating the percentage of defects that arise on the surface of the samples after the machining process, then the qualities were classified into five quality classes. The results showed that the machining properties of timo wood and kabesak wood were very good and belonging to the quality of class I. The significant difference between the machining properties of both the timbers is in the sanding properties, where the average free defect of sanding timo wood is 85% while kabesak wood is 84.5%. Both timo and kabesak wood are suitable as raw material, for the variety of furniture and molding products.

Online Shopping: Advantages over the Offline Alternative

OpenAIRE

Dr Joshua Chang

2003-01-01

The advent of the Internet as a shopping medium has enabled shoppers to gain shopping benefits such as convenience and time-saving, better information, and price savings. This paper aims to provide a better understanding of the benefits of Internet shopping by identifying and discussing the advantages of Internet shopping over traditional storefront shopping.

A multi-objective optimization problem for multi-state series-parallel systems: A two-stage flow-shop manufacturing system

International Nuclear Information System (INIS)

Azadeh, A.; Maleki Shoja, B.; Ghanei, S.; Sheikhalishahi, M.

2015-01-01

This research investigates a redundancy-scheduling optimization problem for a multi-state series parallel system. The system is a flow shop manufacturing system with multi-state machines. Each manufacturing machine may have different performance rates including perfect performance, decreased performance and complete failure. Moreover, warm standby redundancy is considered for the redundancy allocation problem. Three objectives are considered for the problem: (1) minimizing system purchasing cost, (2) minimizing makespan, and (3) maximizing system reliability. Universal generating function is employed to evaluate system performance and overall reliability of the system. Since the problem is in the NP-hard class of combinatorial problems, genetic algorithm (GA) is used to find optimal/near optimal solutions. Different test problems are generated to evaluate the effectiveness and efficiency of proposed approach and compared to simulated annealing optimization method. The results show the proposed approach is capable of finding optimal/near optimal solution within a very reasonable time. - Highlights: • A redundancy-scheduling optimization problem for a multi-state series parallel system. • A flow shop with multi-state machines and warm standby redundancy. • Objectives are to optimize system purchasing cost, makespan and reliability. • Different test problems are generated and evaluated by a unique genetic algorithm. • It locates optimal/near optimal solution within a very reasonable time

Shopping Association Of Government Education Development In East Java

OpenAIRE

Muhamamd Guzali Tafalas; Deddy T. Tikson; Baharuddin; Hj. Hasniati

2017-01-01

The purpose of this study is to explain and analyze in detail The positive association Government spending in education PP with a Gross Enrolment Ratio GER and net enrollment ratio NER in East Java Province. Government spending on education is less associated significantly to the gross enrollment ratio at primary education. gross enrollment GER especially at the level of elementary education. As for the middle and high school level of education government spending on education was significant...

Heuristics methods for the flow shop scheduling problem with separated setup times

Directory of Open Access Journals (Sweden)

Marcelo Seido Nagano

2012-06-01

Full Text Available This paper deals with the permutation flow shop scheduling problem with separated machine setup times. As a result of an investigation on the problem characteristics, four heuristics methods are proposed with procedures of the construction sequencing solution by an analogy with the asymmetric traveling salesman problem with the objective of minimizing makespan. Experimental results show that one of the new heuristics methods proposed provide high quality solutions in comparisons with the evaluated methods considered in the literature.

PENGARUH ATMOSFER PUSAT BELANJA PADA SHOPPING VALUE

Directory of Open Access Journals (Sweden)

Astrid Kusumowidagdo

2015-11-01

Full Text Available AbstractAt the moment, the creation of shopping environment design that provides certain sensation and experience become strategy of the shopping center. This research aims to find out about the influence of shopping center’s atmosphere towards shopping value. The formative factors of shopping centre’s atmosphere are architectural features, interior features and support facilities. The research begins with a focus group to adjust the indicators of the previous research to the present research’s object. The next stage of research is done with a multiple regression analysis. The research object is the atmosphere condition of Senayan City shopping center in Jakarta and the subjects are samples totaling to sixty people. The samples are visitors from the middle-class segment between the age of 18-35.The research finds that architectural features, interior features and support facilities collectively bring an influence towards shopping value in Senayan City Pusat belanja, wether partially, only interior features show the significant influence towards shopping value.Keywords: design, atmosphere, shopping centre, shopping value.AbstrakSaat ini penciptaan lingkungan belanja dengan yang memberikan sensasi dan pengalaman telah menjadi bagian dari strategi bisnis pusat belanja. Penelitian ini bertujuan untuk menelusuri pengaruh atmosfer pusat belanja terhadap shopping value. Atmosfer pusat belanja dibentuk oleh faktor-faktor yaitu fitur arsitektur, fitur interior dan fasilitas penunjang. Penelitian ini diawali dengan focus group untuk penentuan indikator yang tepat dan dilanjutkan dengan survey pada 60 orang dengan usia 18-35 tahun yang bersegmen menengah. Obyek penelitian adalahatmosfer dari pusat belanja Senayan City. Hasil penelitian menunjukkan terdapat hubungan dari faktor-faktor atmosfer pusat belanja secara serempak pada shopping value, sedangkan secara parsial hanya fitur interior yang memberikan pengaruh signifikan pada shopping value

Preliminary Development of Real Time Usage-Phase Monitoring System for CNC Machine Tools with a Case Study on CNC Machine VMC 250

Science.gov (United States)

Budi Harja, Herman; Prakosa, Tri; Raharno, Sri; Yuwana Martawirya, Yatna; Nurhadi, Indra; Setyo Nogroho, Alamsyah

2018-03-01

The production characteristic of job-shop industry at which products have wide variety but small amounts causes every machine tool will be shared to conduct production process with dynamic load. Its dynamic condition operation directly affects machine tools component reliability. Hence, determination of maintenance schedule for every component should be calculated based on actual usage of machine tools component. This paper describes study on development of monitoring system to obtaining information about each CNC machine tool component usage in real time approached by component grouping based on its operation phase. A special device has been developed for monitoring machine tool component usage by utilizing usage phase activity data taken from certain electronics components within CNC machine. The components are adaptor, servo driver and spindle driver, as well as some additional components such as microcontroller and relays. The obtained data are utilized for detecting machine utilization phases such as power on state, machine ready state or spindle running state. Experimental result have shown that the developed CNC machine tool monitoring system is capable of obtaining phase information of machine tool usage as well as its duration and displays the information at the user interface application.

Proposed algorithm to improve job shop production scheduling using ant colony optimization method

Science.gov (United States)

Pakpahan, Eka KA; Kristina, Sonna; Setiawan, Ari

2017-12-01

This paper deals with the determination of job shop production schedule on an automatic environment. On this particular environment, machines and material handling system are integrated and controlled by a computer center where schedule were created and then used to dictate the movement of parts and the operations at each machine. This setting is usually designed to have an unmanned production process for a specified interval time. We consider here parts with various operations requirement. Each operation requires specific cutting tools. These parts are to be scheduled on machines each having identical capability, meaning that each machine is equipped with a similar set of cutting tools therefore is capable of processing any operation. The availability of a particular machine to process a particular operation is determined by the remaining life time of its cutting tools. We proposed an algorithm based on the ant colony optimization method and embedded them on matlab software to generate production schedule which minimize the total processing time of the parts (makespan). We test the algorithm on data provided by real industry and the process shows a very short computation time. This contributes a lot to the flexibility and timelines targeted on an automatic environment.

Skipping Strategy (SS) for Initial Population of Job-Shop Scheduling Problem

Science.gov (United States)

Abdolrazzagh-Nezhad, M.; Nababan, E. B.; Sarim, H. M.

2018-03-01

Initial population in job-shop scheduling problem (JSSP) is an essential step to obtain near optimal solution. Techniques used to solve JSSP are computationally demanding. Skipping strategy (SS) is employed to acquire initial population after sequence of job on machine and sequence of operations (expressed in Plates-jobs and mPlates-jobs) are determined. The proposed technique is applied to benchmark datasets and the results are compared to that of other initialization techniques. It is shown that the initial population obtained from the SS approach could generate optimal solution.

Performance comparison of plastic shopping bags in modern and traditional retail

Science.gov (United States)

Radini, F. A.; Wulandari, R.; Nasiri, S. J. A.; Winarto, D. A.

2017-07-01

Followed by implementation of paid plastic bag policy in Indonesia’s modern and traditional retail, community question related to plastic shopping bag performance arise. But, there is limited information about it. Therefore, the assessment of the performance to compare between plastic shopping bags in modern retail and traditional retail should be interesting. The observation performance of plastic shopping bag were weight holding capacity, tear resistant and elongation. This performance were tested using Universal Testing Machine. Physical and physico-chemical properties also identified to determine factor affecting the performance of plastic shopping bag. The physical properties were analysed using visual and thickness gauge to see the colour and measure the thickness. The analysis of physico-chemical properties were carried out using DSC (Differential Scanning Calorimetry), TGA (Thermal Gravimetry Analysis), Furnace and FTIR (Fourier Transform Infra Red Spectroscopy) to identify the materials, also its melting and decomposition temperature. The result showed that the performance difference between modern retail plastic bag with traditional retail plastic bag appears only in the performance of elongation. The elongation of modern retail plastic bag is 121 - 413%, while traditional has 170 - 609%. According to physico-chemical test result, modern retail and traditional retail plastic bag contain polyethylene as main material and has melting temperature in the range of High Density Polyethylene (HDPE) melting temperature. However, modern retail plastic bag has 18.31 - 33.87% of inorganic filler percentage, whereas the traditional retail plastic bag has 0.35 - 9.85%. This inorganic filler percentage probably a contributing factor in the elongation performance difference between modern retail plastic bag with traditional retail plastic bag.

Parallel Branch-and-Bound Methods for the Job Shop Scheduling

DEFF Research Database (Denmark)

Clausen, Jens; Perregaard, Michael

1998-01-01

Job-shop scheduling (JSS) problems are among the more difficult to solve in the class of NP-complete problems. The only successful approach has been branch-and-bound based algorithms, but such algorithms depend heavily on good bound functions. Much work has been done to identify such functions...... for the JSS problem, but with limited success. Even with recent methods, it is still not possible to solve problems substantially larger than 10 machines and 10 jobs. In the current study, we focus on parallel methods for solving JSS problems. We implement two different parallel branch-and-bound algorithms...

Buying cannabis in 'coffee shops'.

Science.gov (United States)

Monshouwer, Karin; Van Laar, Margriet; Vollebergh, Wilma A

2011-03-01

The key objective of Dutch cannabis policy is to prevent and limit the risks of cannabis consumption for users, their direct environment and society ('harm reduction'). This paper will focus on the tolerated sale of cannabis in 'coffee shops'. We give a brief overview of Dutch policy on coffee shops, its history and recent developments. Furthermore, we present epidemiological data that may be indicative of the effects of the coffee shop policy on cannabis and other drug use. Dutch coffee shop policy has become more restrictive in recent years and the number of coffee shops has decreased. Cannabis prevalence rates in the adult population are somewhat below the European average; the rate is relatively high among adolescents; and age of first use appears to be low. On a European level, the use of hard drugs in both the Dutch adult and adolescent population is average to low (except for ecstasy among adults). International comparisons do not suggest a strong, upward effect of the coffee shop system on levels of cannabis use, although prevalence rates among Dutch adolescents give rise to concern. Furthermore, the coffee shop system appears to be successful in separating the hard and soft drugs markets. Nevertheless, in recent years, issues concerning the involvement of organised crime and the public nuisance related to drug tourism have given rise to several restrictive measures on the local level and have sparked a political debate on the reform of Dutch drug policy. © 2011 Trimbos Institute.

Kinect sensing of shopping related actions

NARCIS (Netherlands)

Popa, M.; Koc, A.K.; Rothkrantz, L.J.M.; Shan, C.; Wiggers, P.

2011-01-01

Surveillance systems in shopping malls or supermarkets are usually used for detecting abnormal behavior. We used the distributed video cameras system to design digital shopping assistants which assess the behavior of customers while shopping, detect when they need assistance, and offer their support

Social Sustainability of Shopping Streets in Ankara

Directory of Open Access Journals (Sweden)

Özge YALÇINER ERCOŞKUN

2013-02-01

Full Text Available Shopping streets are integral parts of public spaces in traditional shopping areas of Central Business Districts (CBD. Furthermore, as modern shopping venues, shopping centers offer advantages for modern lifestyles with spacious shopping areas, variety of commercial and social activities, and economic value of their investments. These advantages act in favor of shopping centers and improve the level of shopping street social sustainability and its relevant concepts. The aim of this study is to analyze the main shopping streets of Ankara, using the concepts of social sustainability. In this study, these concepts, such as locality, identity, vitality, viability, sense of place, conviviality, meaning and local characteristics of the shopping streets are investigated. For the first time, the retail unit locations in Ankara, their brands and their business types, are illustrated on thematic land use maps using Geographical Information Systems (GIS software. Next, population activities and consumer spatial behavior are observed and marked on maps that are also referred to as social sustainability maps. The results of the study can be useful in formulating strategies within the framework of social sustainability, which is a relatively new concept.

Study on multi-objective flexible job-shop scheduling problem considering energy consumption

Directory of Open Access Journals (Sweden)

Zengqiang Jiang

2014-06-01

Full Text Available Purpose: Build a multi-objective Flexible Job-shop Scheduling Problem(FJSP optimization model, in which the makespan, processing cost, energy consumption and cost-weighted processing quality are considered, then Design a Modified Non-dominated Sorting Genetic Algorithm (NSGA-II based on blood variation for above scheduling model.Design/methodology/approach: A multi-objective optimization theory based on Pareto optimal method is used in carrying out the optimization model. NSGA-II is used to solve the model.Findings: By analyzing the research status and insufficiency of multi-objective FJSP, Find that the difference in scheduling will also have an effect on energy consumption in machining process and environmental emissions. Therefore, job-shop scheduling requires not only guaranteeing the processing quality, time and cost, but also optimizing operation plan of machines and minimizing energy consumption.Originality/value: A multi-objective FJSP optimization model is put forward, in which the makespan, processing cost, energy consumption and cost-weighted processing quality are considered. According to above model, Blood-Variation-based NSGA-II (BVNSGA-II is designed. In which, the chromosome mutation rate is determined after calculating the blood relationship between two cross chromosomes, crossover and mutation strategy of NSGA-II is optimized and the prematurity of population is overcome. Finally, the performance of the proposed model and algorithm is evaluated through a case study, and the results proved the efficiency and feasibility of the proposed model and algorithm.

Science Shops - a concept for community based learning

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Hende, Merete

2001-01-01

Experience from science shops show that besides assisting citizen groups, science shops can also contribute to the development of university curricula and research. The paper is based on an investigation of the impact of science shops on university curricula and research through a questionnaire...... sent out to science shops and through follow-up interviews with employees from nine different university based science shops. These science shops had in the questionnaire indicated that the science shop in one way or the other has had impact on university curricula and/or research. This paper focuses...... on the impact on university curricula. The case studies have been supplemented with articles and reports. The analysis has focused on the kind of impact, which the science shops have reported, and has tried to relate the impact to the local history of the science shop. One direct impact on the curricula...

Flexible Job-Shop Scheduling with Dual-Resource Constraints to Minimize Tardiness Using Genetic Algorithm

Science.gov (United States)

Paksi, A. B. N.; Ma'ruf, A.

2016-02-01

In general, both machines and human resources are needed for processing a job on production floor. However, most classical scheduling problems have ignored the possible constraint caused by availability of workers and have considered only machines as a limited resource. In addition, along with production technology development, routing flexibility appears as a consequence of high product variety and medium demand for each product. Routing flexibility is caused by capability of machines that offers more than one machining process. This paper presents a method to address scheduling problem constrained by both machines and workers, considering routing flexibility. Scheduling in a Dual-Resource Constrained shop is categorized as NP-hard problem that needs long computational time. Meta-heuristic approach, based on Genetic Algorithm, is used due to its practical implementation in industry. Developed Genetic Algorithm uses indirect chromosome representative and procedure to transform chromosome into Gantt chart. Genetic operators, namely selection, elitism, crossover, and mutation are developed to search the best fitness value until steady state condition is achieved. A case study in a manufacturing SME is used to minimize tardiness as objective function. The algorithm has shown 25.6% reduction of tardiness, equal to 43.5 hours.

A Bee Evolutionary Guiding Nondominated Sorting Genetic Algorithm II for Multiobjective Flexible Job-Shop Scheduling

Directory of Open Access Journals (Sweden)

Qianwang Deng

2017-01-01

Full Text Available Flexible job-shop scheduling problem (FJSP is an NP-hard puzzle which inherits the job-shop scheduling problem (JSP characteristics. This paper presents a bee evolutionary guiding nondominated sorting genetic algorithm II (BEG-NSGA-II for multiobjective FJSP (MO-FJSP with the objectives to minimize the maximal completion time, the workload of the most loaded machine, and the total workload of all machines. It adopts a two-stage optimization mechanism during the optimizing process. In the first stage, the NSGA-II algorithm with T iteration times is first used to obtain the initial population N, in which a bee evolutionary guiding scheme is presented to exploit the solution space extensively. In the second stage, the NSGA-II algorithm with GEN iteration times is used again to obtain the Pareto-optimal solutions. In order to enhance the searching ability and avoid the premature convergence, an updating mechanism is employed in this stage. More specifically, its population consists of three parts, and each of them changes with the iteration times. What is more, numerical simulations are carried out which are based on some published benchmark instances. Finally, the effectiveness of the proposed BEG-NSGA-II algorithm is shown by comparing the experimental results and the results of some well-known algorithms already existed.

A Bee Evolutionary Guiding Nondominated Sorting Genetic Algorithm II for Multiobjective Flexible Job-Shop Scheduling.

Science.gov (United States)

Deng, Qianwang; Gong, Guiliang; Gong, Xuran; Zhang, Like; Liu, Wei; Ren, Qinghua

2017-01-01

Flexible job-shop scheduling problem (FJSP) is an NP-hard puzzle which inherits the job-shop scheduling problem (JSP) characteristics. This paper presents a bee evolutionary guiding nondominated sorting genetic algorithm II (BEG-NSGA-II) for multiobjective FJSP (MO-FJSP) with the objectives to minimize the maximal completion time, the workload of the most loaded machine, and the total workload of all machines. It adopts a two-stage optimization mechanism during the optimizing process. In the first stage, the NSGA-II algorithm with T iteration times is first used to obtain the initial population N , in which a bee evolutionary guiding scheme is presented to exploit the solution space extensively. In the second stage, the NSGA-II algorithm with GEN iteration times is used again to obtain the Pareto-optimal solutions. In order to enhance the searching ability and avoid the premature convergence, an updating mechanism is employed in this stage. More specifically, its population consists of three parts, and each of them changes with the iteration times. What is more, numerical simulations are carried out which are based on some published benchmark instances. Finally, the effectiveness of the proposed BEG-NSGA-II algorithm is shown by comparing the experimental results and the results of some well-known algorithms already existed.

Why Shops Close Again : An Evolutionary Perspective on the Deregulation of Shopping Hours

NARCIS (Netherlands)

Kosfeld, M.

1999-01-01

This paper introduces a new perspective on the deregulation of shopping hours based on ideas from evolutionary game theory. We study a retail economy where shopping hours have been deregulated recently. It is argued that first, the deregulation leads to a coordination problem between store owners

Use of Machine Learning Techniques for Iidentification of Robust Teleconnections to East African Rainfall Variability in Observations and Models

Science.gov (United States)

Roberts, J. Brent; Robertson, Franklin R.; Funk, Chris

2014-01-01

Providing advance warning of East African rainfall variations is a particular focus of several groups including those participating in the Famine Early Warming Systems Network. Both seasonal and long-term model projections of climate variability are being used to examine the societal impacts of hydrometeorological variability on seasonal to interannual and longer time scales. The NASA / USAID SERVIR project, which leverages satellite and modeling-based resources for environmental decision making in developing nations, is focusing on the evaluation of both seasonal and climate model projections to develop downscaled scenarios for using in impact modeling. The utility of these projections is reliant on the ability of current models to capture the embedded relationships between East African rainfall and evolving forcing within the coupled ocean-atmosphere-land climate system. Previous studies have posited relationships between variations in El Niño, the Walker circulation, Pacific decadal variability (PDV), and anthropogenic forcing. This study applies machine learning methods (e.g. clustering, probabilistic graphical model, nonlinear PCA) to observational datasets in an attempt to expose the importance of local and remote forcing mechanisms of East African rainfall variability. The ability of the NASA Goddard Earth Observing System (GEOS5) coupled model to capture the associated relationships will be evaluated using Coupled Model Intercomparison Project Phase 5 (CMIP5) simulations.

Minimizing the Makespan for a Two-Stage Three-Machine Assembly Flow Shop Problem with the Sum-of-Processing-Time Based Learning Effect

Directory of Open Access Journals (Sweden)

Win-Chin Lin

2018-01-01

Full Text Available Two-stage production process and its applications appear in many production environments. Job processing times are usually assumed to be constant throughout the process. In fact, the learning effect accrued from repetitive work experiences, which leads to the reduction of actual job processing times, indeed exists in many production environments. However, the issue of learning effect is rarely addressed in solving a two-stage assembly scheduling problem. Motivated by this observation, the author studies a two-stage three-machine assembly flow shop problem with a learning effect based on sum of the processing times of already processed jobs to minimize the makespan criterion. Because this problem is proved to be NP-hard, a branch-and-bound method embedded with some developed dominance propositions and a lower bound is employed to search for optimal solutions. A cloud theory-based simulated annealing (CSA algorithm and an iterated greedy (IG algorithm with four different local search methods are used to find near-optimal solutions for small and large number of jobs. The performances of adopted algorithms are subsequently compared through computational experiments and nonparametric statistical analyses, including the Kruskal–Wallis test and a multiple comparison procedure.

Hybrid job shop scheduling

NARCIS (Netherlands)

Schutten, Johannes M.J.

1995-01-01

We consider the problem of scheduling jobs in a hybrid job shop. We use the term 'hybrid' to indicate that we consider a lot of extensions of the classic job shop, such as transportation times, multiple resources, and setup times. The Shifting Bottleneck procedure can be generalized to deal with

Online Shopping In The UK

OpenAIRE

K. K. Ramachandran; K. K. Karthick; M. Saravana Kumar

2011-01-01

This paper will contribute to current academic literature in the area of online retailing and consumer behaviour. Our research outlines a survey conducted with respondents from the UK to ascertain their attitudes to grocery shopping both off and online. The findings indicate that, whilst the vast majority of our sample has experience of online shopping, few actively engage in online grocery shopping. Some of the reasons for this are highlighted and the key issues relate to consumer trust and ...

Shopping Online Sebagai Gaya Hidup

OpenAIRE

Lestari, Sri Budi

2015-01-01

The use of internet communication technology can make the world as if in one hand makes electronicbusiness with the concept of Online Shopping at its peak in recent years along with the development ofcommunication technologies over theInternet.How to shop online by using the internet through computers andmobile devices is increasingly popular smartphone can even be said to have become a trend today.Variousconvenience of shopping be the main thing to offer, with enough gadgets available in the...

The Shopping Mall: A Teenager Hangout.

Science.gov (United States)

Anthony, Kathryn H.

1985-01-01

Investigated teenagers' use of the shopping mall as a "hangout" through interviews with 51 adolescents using the mall, and 10 hours of behavioral observations. Results indicated that many teenagers visit the shopping center regularly to watch members of the opposite sex, play video games, see friends, shop, and people-watch. (Author/NRB)

Cross-border shopping and tourism destination marketing

DEFF Research Database (Denmark)

Makkonen, Teemu

2016-01-01

This article addresses the economic impact that cross-border shopping has on the local tourism industry and the ways that cross-border shopping is taken advantage of in tourism destination marketing. Southern Jutland–situated in Denmark just north of the German border, where border shops situated......-border shopping into tourism destination marketing strategies. The results have wider relevance for other border regions.......This article addresses the economic impact that cross-border shopping has on the local tourism industry and the ways that cross-border shopping is taken advantage of in tourism destination marketing. Southern Jutland–situated in Denmark just north of the German border, where border shops situated...... just south of the same border enable Danes to capitalize on the lower value added tax levels in Germany–is utilized as an illustrative case example. The data was collected by analysing the relevant tourism destination marketing material and via interviews with local destination marketing organizations...

Dynamic Support of Government in Online Shopping

OpenAIRE

Hai, Le Chi; Alam Kazmi, Syed Hasnain

2015-01-01

Advancements in online shopping for consumers requires consistent government support policies and the introduction of substantial government laws and regulations. In order to establish innovative developments in online shopping market environment that makes online shopping faster and stable, the government perspective is vital with the Technology Acceptance Model (TAM) for research and development in online shopping behavior for consumer’s confidence and their purchase intention. The proposed...

SHOPPING ONLINE SEBAGAI GAYA HIDUP

OpenAIRE

Sri Budi Lestari

2016-01-01

The use of internet communication technology can make the world as if in one hand makes electronic business with the concept of Online Shopping at its peak in recent years along with the development of communication technologies over theInternet.How to shop online by using the internet through computers and mobile devices is increasingly popular smartphone can even be said to have become a trend today.Various convenience of shopping be the main thing to offer, with enough gadgets ...

Process Waste Assessment - Paint Shop

International Nuclear Information System (INIS)

Phillips, N.M.

1993-06-01

This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Paint Shop, Building 913, Room 130. Special attention is given to waste streams generated by the spray painting process because it requires a number of steps for preparing, priming, and painting an object. Also, the spray paint booth covers the largest area in R-130. The largest and most costly waste stream to dispose of is open-quote Paint Shop wasteclose quotes -- a combination of paint cans, rags, sticks, filters, and paper containers. These items are compacted in 55-gallon drums and disposed of as solid hazardous waste. Recommendations are made for minimizing waste in the Paint Shop. Paint Shop personnel are very aware of the need to minimize hazardous wastes and are continuously looking for opportunities to do so

Evolutionary Hybrid Particle Swarm Optimization Algorithm for Solving NP-Hard No-Wait Flow Shop Scheduling Problems

Directory of Open Access Journals (Sweden)

Laxmi A. Bewoor

2017-10-01

Full Text Available The no-wait flow shop is a flowshop in which the scheduling of jobs is continuous and simultaneous through all machines without waiting for any consecutive machines. The scheduling of a no-wait flow shop requires finding an appropriate sequence of jobs for scheduling, which in turn reduces total processing time. The classical brute force method for finding the probabilities of scheduling for improving the utilization of resources may become trapped in local optima, and this problem can hence be observed as a typical NP-hard combinatorial optimization problem that requires finding a near optimal solution with heuristic and metaheuristic techniques. This paper proposes an effective hybrid Particle Swarm Optimization (PSO metaheuristic algorithm for solving no-wait flow shop scheduling problems with the objective of minimizing the total flow time of jobs. This Proposed Hybrid Particle Swarm Optimization (PHPSO algorithm presents a solution by the random key representation rule for converting the continuous position information values of particles to a discrete job permutation. The proposed algorithm initializes population efficiently with the Nawaz-Enscore-Ham (NEH heuristic technique and uses an evolutionary search guided by the mechanism of PSO, as well as simulated annealing based on a local neighborhood search to avoid getting stuck in local optima and to provide the appropriate balance of global exploration and local exploitation. Extensive computational experiments are carried out based on Taillard’s benchmark suite. Computational results and comparisons with existing metaheuristics show that the PHPSO algorithm outperforms the existing methods in terms of quality search and robustness for the problem considered. The improvement in solution quality is confirmed by statistical tests of significance.

Optimal Research and Numerical Simulation for Scheduling No-Wait Flow Shop in Steel Production

Directory of Open Access Journals (Sweden)

Huawei Yuan

2013-01-01

Full Text Available This paper considers the m-machine flow shop scheduling problem with the no-wait constraint to minimize total completion time which is the typical model in steel production. First, the asymptotic optimality of the Shortest Processing Time (SPT first rule is proven for this problem. To further evaluate the performance of the algorithm, a new lower bound with performance guarantee is designed. At the end of the paper, numerical simulations show the effectiveness of the proposed algorithm and lower bound.

Youth Clothes-Shopping Behavior: An Analysis by Gender.

Science.gov (United States)

Peters, John F.

1989-01-01

Explored possible gender differences in clothes-shopping behavior among adolescents. Findings from 387 college students revealed that: parents financially assisted sons and daughters equally; there was no gender difference in shopping frequency; mothers more frequently shopped with sons than with daughters; fathers rarely shopped with any…

Consumers preferences of shopping centers in Bratislava (Slovakia

Directory of Open Access Journals (Sweden)

Kristína Bilková

2016-05-01

Full Text Available There have been changes in the shopping behavior and preferences of consumers in the post-communist countries caused by political changes after 1989. Slovakia is not an exception, and it has been observed a change not only at the consumers’ level but also in retail stores. A notable bearer of such changes was the construction of big shopping centers that were a new phenomenon in shopping. They quickly became popular and changed spatial and shopping patterns of consumers. The main aim of this study is to analyze and evaluate the shopping preferences of consumers based on the example of the capital city – Bratislava (at the level of urban districts. The database consists of results of a questionnaire survey carried out in 2011. Respondents were interviewed inside the shopping center. The partial aims focus on the analysis of consumers’ perceptions, the frequency of their shopping and the mode of transport used for shopping. One of the goals of this study is also to evaluate the perception of consumers in terms of the catchment areas of the chosen shopping center, as well as the perceptional classification of retail in the given area and the accessibility of stores.

Strategy of image management in retail shops

Directory of Open Access Journals (Sweden)

Sandra Soče Kraljević

2007-12-01

Full Text Available A sound positioning in consumers’ mind, along with strong promotion support, brought many retail shops to the top. This is mostly thanks to the image created in the consumers’ mind. A retail shop’s image may but need not conform to reality. Image often looks like a cliché. It overstates certain elements of the shop while simply omitting others. That is exactly why image is of great importance and often crucial to consumer behavior. This paper aims at determining the impact of image on customer behavior in the course of decision making about shopping and choosing a particular retail shop. Image is a significant factor of success of every company, hence also of a retail shops. It is a relatively strong value and a component of creating competitive advantage. But if we do not pay sufficient attention to image, it can become counterproductive. Instead to, like an additional value helps creating and maintaining the advantage in competition and realization of business aims, transforms into a limiting factor. Therefore, it is imperative to identify the elements of image that are of greatest importance to customers. Research has shown that customers choose the retail shop first and after that products and brands within this shop. When it comes to the supermarket, as a kind of retail shop, research has shown that two out of three shopping decisions are made by the customer on the spot, that is, without previous planning. That practically means that we can influence customers with different sales techniques. The paper suggests different strategies of image management for supermarkets and conventional shops. For supermarkets it is the “widest assortment” strategy, while for conventional shops the strategy is that of a “selected group of products“. Improvements to research methods will enable getting more information about customer behavior, while pressures of increased competition in the business environment will force retailers to get

CERN Shop - Christmas Sale in Bldg. 33

CERN Multimedia

PH Department

2010-01-01

Looking for Christmas present ideas? The CERN Shop will give CERN card holders a special reduction of 10 % on all CERN Shop articles from Monday 13.12.2010 to Saturday 18.12.2010. Come and visit the CERN Shop in the Reception Building 33.

Marketing plan for a web shop business

OpenAIRE

Koskivaara, Leonilla

2014-01-01

Internet has changed the buying behavior of consumers during the past years and companies need to adapt to the changes. Web shop business is an important sales channel of today’s companies. Advantages of a web shop business include cost effectiveness and potential to do business globally. Challenges of a web shop business include search engine optimization and running both, a retail store and a web shop at the same time. Social media has become an important marketing channel and has bec...

Comparison of the risks of shopping behavior and opioid abuse between tapentadol and oxycodone and association of shopping behavior and opioid abuse.

Science.gov (United States)

Cepeda, M Soledad; Fife, Daniel; Kihm, Mary A; Mastrogiovanni, Greg; Yuan, Yingli

2014-12-01

This study compared the risks of opioid shopping behavior and opioid abuse between tapentadol immediate release and oxycodone immediate release and, to validate the definition of shopping, examined the association between opioid shopping and opioid abuse further. This retrospective cohort study using linked dispensing and diagnosis databases followed opioid-naive patients for development of shopping behavior and/or opioid abuse during 1 year after initial exposure to tapentadol or oxycodone. Shopping was defined by having overlapping opioid prescriptions from >1 prescriber filled at ≥3 pharmacies; abuse by having International Classification of Diseases, 9th revision diagnoses reflecting opioid abuse, addiction, or dependence. To determine their association, we cross-tabulated shopping and opioid abuse and calculated odds ratios. Risks of developing each outcome were estimated using logistic regression. Among 277,401 participants initiating opioid use with tapentadol (39,524) or oxycodone (237,877), 0.6% developed shopping behavior, 0.75% developed abuse. Higher proportions of patients in the oxycodone group developed shopping behavior and abuse than in the tapentadol group (shopping: adjusted odds ratio [95% confidence interval], 0.45 [0.36-0.55]; abuse: 0.44 [0.37-0.54]). Shopping behavior and abuse were associated; of those with shopping behavior, 6.5% had abuse. Age (18 to 64 y), sex (male), prior benzodiazepine use, paying cash, and history (mood disorders, abuse of nonopioid medications, and back pain) were risk factors for developing either outcome. Shopping behavior and abuse measure complementary, but associated, constructs, which further validates the current definition of shopping. The risk of developing either is lower among patients who initiate opioid use with tapentadol than those who initiate opioid use with oxycodone.

Shop stewards' learning and union strategies

DEFF Research Database (Denmark)

Warring, Niels

2007-01-01

In Denmark the trade unions have well established educational systems providing the shop stewards with a variety of competencies. Union courses have been analysed focusing on shop stewards' satisfaction with the content and the practical impact of the courses. However, little attention has been...... different theoretical traditions: Shop steward's learning is situational, relational and cross-contextual. Shop stewards' learning is lifelong and life wide. And shop stewards' learning is closely connected to the development of the labour market and not least the unions' priorities, interpretation...

Why do you shop there? A mixed methods study mapping household food shopping patterns onto weekly routines of black women.

Science.gov (United States)

DiSantis, Katherine Isselmann; Hillier, Amy; Holaday, Rio; Kumanyika, Shiriki

2016-01-28

The effectiveness of initiatives to increase healthy food access may be affected by where people decide to shop. People with poor neighborhood access to large grocery stores develop shopping patterns that require traveling to other areas, and some people who do have neighborhood access also travel elsewhere for food shopping. We sought to gain an understanding of household food shopping patterns in a sample of Black women in terms of where they shopped and why. All food shopping trips of 35 low- or middle/high-income black mothers or caregivers living with at least one child were identified from grocery shopping receipts collected over four consecutive weeks. Food shopping locations were mapped along with locations of participants' homes and other places they visited during weekly routine travels (e.g. work, child's school). Semi-structured individual interviews elicited narrative information about whether and how grocery shopping trips were linked to routine travels. Inductive content analysis was utilized to identify emergent themes from interviews. Themes were considered in relation to geospatial distances and travel patterns identified through mapping of participants' shopping. Participants shopped at an average of six different stores, traveling on average a total of 35 miles (sd = 41) (Euclidian distance) over the four weeks. The most frequented store was within a mile of home (57%) or home or another place visited in the weekly routine for about 77% of participants. Interview results emphasized the concept of convenience which referred to geographical proximity to the home or routine destinations and also to potential to save time because several stores were co-located or because the store layout was easy to navigate and familiar. Store selection also related to mode of transportation, pricing, and family preference for certain foods. People have specific reasons for consistently shopping in areas outside of their neighborhood of residence. Incorporating

Marketing activities of vape shops across racial/ethnic communities.

Science.gov (United States)

Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B; Sussman, Steve

2016-01-01

There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community's demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by ethnic composition. Data was gathered in 2014 from a pilot-study on vape shops (n=77) in Los Angeles, which documented the characteristics of shops through employee interviews and in-store observations. Data were collected from shops located in communities that were predominantly, African-American (n=20), Hispanic (n=17), Korean (n=18), or non-Hispanic White (n=22). Sixty-one percent of vape shops had advertisements (print ads and posters) for e-cigarettes and 84% offered discounts. Vape shops in Hispanic communities were more likely to have ethnic specific marketing material compared to shops in other communities. All the shops provided customers with free samples, however those in Korean and non-Hispanic White communities had a significantly higher prevalence of customer accessible free samples. Vape shop marketing practices differed by ethnic community. A large majority of shops provided free samples to their customers, a practice which is now banned by the FDA. It will be important to monitor how vape shops will adjust their marketing strategy because of this ban. Future research should expand on the findings presented here to provide regulators with further crucial information.

CERN Shop - Christmas Sale in Bldg. 33

CERN Multimedia

PH Department

Looking for Christmas present ideas? The CERN Shop will give the CERN card holders a special reduction of 10 % on all CERN Shop articles from Friday 11.12.2009 to Thursday 17.12.2009. Come to visit the CERN Shop at the Reception, Building 33. PH-EDU-PO

Reflexivity in performative science shop projects

OpenAIRE

Beunen, R.; Duineveld, M.; During, R.; Straver, G.H.M.B.; Aalvanger, A.

2012-01-01

Science shop research projects offer possibilities for universities to engage with communities. Many science shop projects directly or indirectly intend to empower certain marginalised groups or interests within a decision-making process. In this article we argue that it is important to reflect on the role and position the researchers have in these projects. We present three science shop projects to illustrate some of the dilemmas that may arise in relation to citizen empowerment, democracy, ...

Handbook for Trade and Industrial Shop Teachers.

Science.gov (United States)

Texas A and M Univ., College Station. Vocational Instructional Services.

This handbook is intended to help teachers of pre-employment shop courses in organizing and delivering instruction in both the shop and classroom. Addressed in the guide are the following topics: the instructor's place in the local school organization; the instructor's job (objectives, advisory committees, occupational analysis, shop/classroom and…

Dimensions of Consumer's Perceived Risk in Online Shopping

Institute of Scientific and Technical Information of China (English)

YE Naiyi

2004-01-01

Perceived risk is an important concept in consumer behavior in online shopping. It impedes the adopting online shopping. A structure model with seven factors of consumer's perceived risk in online shopping is developed in this paper. The results have the descriptive power about Chinese consumers' perceived risk in Internet shopping and provide framework for managerial use in China's e-commerce market environment.

Social image of students who shop and don't shop online.

Science.gov (United States)

Lammers, H Bruce; Curren, Mary T; Cours, Deborah; Lammers, Marilyn L

2003-06-01

A descriptive survey of a stratified random sample of 326 undergraduates from a large, diverse university in Los Angeles was conducted to assess whether resistance to online shopping might be, in part, related to negative social perceptions of those who shop online. Indirect questioning showed that students perceived online student shoppers as more lazy and less likely to fear for the safety and security of others but also as more trustworthy, attractive, successful, and smart. Differences in social perceptions were not related to these students' own online spending.

INDONESIAN CUSTOMER SATISFACTION IN ONLINE SHOPPING TRADING

Directory of Open Access Journals (Sweden)

Hermawan F.

2018-03-01

Full Text Available This research aims to find out if the ease of shopping, site design, informative, comprehensive, and communication have a significant influence on the level of Indonesian customer satisfaction in online shopping transactions and how the impact to the word of mouth communication. Respondents of this study are the 250 students of Jakarta colleges. This study found that the variables of design, simplicity, and security have an influence on customer satisfaction in shopping online, while the informative variable and communication have no influence on the customer's satisfaction online shopping.

Space Odyssey Gift Shop

Science.gov (United States)

2000-01-01

The Space Odyssey Gift Shop located in StenniSphere at the John C. Stennis Space Center in Hancock County, Miss., offers every visitor the opportunity to go home with 'the right stuff' from his or her StenniSphere visit. The gift shop is located just inside the front doors to StenniSphere and offers a wide range of space-related apparel, memorabilia, toys, books, mission patches and more.

Determinants Of Online Shopping In Manado

OpenAIRE

Halim, Ellen

2013-01-01

Retailers utilize online media to reach more potential customers. Internet connects the retailer and customers without any geographic location boundaries. Internet growth has a positive impact for business world. There is a new shopping method in non-store shopping as people can buy products or services without having to travel to the outlets like traditional retail does. With the increase of online retailers on internet world, online shopping became popular. The objective of this research is...

Potential of Natural Ventilation in Shopping Centres

DEFF Research Database (Denmark)

Diederichsen, Alice; Friis, Kristina; Brohus, Henrik

2008-01-01

The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV) in shop......The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV......) in shopping centres with focus on both the achieved IEQ and energy consumptions for air movement. By thermal building simulations it is found that there exists an interesting potential for hybrid ventilation of shopping centres, which can lead to great savings in the electrical energy consumptions...

HESITANCY TOWARDS ONLINE SHOPPING, A STUDY OF PAKISTANI CONSUMERS

Directory of Open Access Journals (Sweden)

Usman YOUSAF

2012-01-01

Full Text Available To study the influence of Perceived cost, risk, convenience and enjoyment on online consumer purchases. Being more convenient online shopping seems painless compared to in store shopping, why consumers are still reluctant to shop online?.A sample of 220 questionnaires was filled from different departments at University of Sargodha. Respondents were asked to fill the questionnaire based on four factors (Perceived cost, Perceived risk, Perceived convenience, Perceived enjoyment, there were 2 general questions. Out of 220, 207 questionnaires were returned. One sample test is applied in this study to check the reliability of independent variables. Analysis was also done on basis of gender and their ages. The most important factor out of four, which can persuade the customer's online buying decision, is delivery cost for purchased items and it has negative relationship with dependent variable, moreover perceived risk has also negative relationship with dependent one. Perceived convenience and Perceived enjoyment has positive relationship with online shopping preference. As online shopping is easier to do but due to extra delivery cost and risk factors consumers do not adopt online shopping and these factors should be minimized to promote online shopping. Online shopping should be promoted and to gain the consumer confidence, delivery cost and risk factor should be minimized. As online shopping is easier to do as compared to offline shopping but people still reluctant to use internet for online shopping, so to promote online shopping delivery cost and risk factor should be minimized to gain consumers attraction and confidence. People want to experience online shopping but it won’t be promoted until delivery cost and perceived risk factors be reduced. A little work has been done on exploring the factors that influence the online buying decision. These factors are called situational factors and include delivery charges, risk factors, convenience

Genetic Algorithm Combined with Gradient Information for Flexible Job-shop Scheduling Problem with Different Varieties and Small Batches

Directory of Open Access Journals (Sweden)

Chen Ming

2017-01-01

Full Text Available To solve the Flexible Job-shop Scheduling Problem (FJSP with different varieties and small batches, a modified meta-heuristic algorithm based on Genetic Algorithm (GA is proposed in which gene encoding is divided into process encoding and machine encoding, and according to the encoding mode, the machine gene fragment is connected with the process gene fragment and can be changed with the alteration of process genes. In order to get the global optimal solutions, the crossover and mutation operation of the process gene fragment and machine gene fragment are carried out respectively. In the initialization operation, the machines with shorter manufacturing time are more likely to be chosen to accelerate the convergence speed and then the tournament selection strategy is applied due to the minimum optimization objective. Meanwhile, a judgment condition of the crossover point quantity is introduced to speed up the population evolution and as an important interaction bridge between the current machine and alternative machines in the incidence matrix, a novel mutation operation of machine genes is proposed to achieve the replacement of manufacturing machines. The benchmark test shows the correctness of proposed algorithm and the case simulation proves the proposed algorithm has better performance compared with existing algorithms.

A Hybrid Metaheuristic Approach for Minimizing the Total Flow Time in A Flow Shop Sequence Dependent Group Scheduling Problem

Directory of Open Access Journals (Sweden)

Antonio Costa

2014-07-01

Full Text Available Production processes in Cellular Manufacturing Systems (CMS often involve groups of parts sharing the same technological requirements in terms of tooling and setup. The issue of scheduling such parts through a flow-shop production layout is known as the Flow-Shop Group Scheduling (FSGS problem or, whether setup times are sequence-dependent, the Flow-Shop Sequence-Dependent Group Scheduling (FSDGS problem. This paper addresses the FSDGS issue, proposing a hybrid metaheuristic procedure integrating features from Genetic Algorithms (GAs and Biased Random Sampling (BRS search techniques with the aim of minimizing the total flow time, i.e., the sum of completion times of all jobs. A well-known benchmark of test cases, entailing problems with two, three, and six machines, is employed for both tuning the relevant parameters of the developed procedure and assessing its performances against two metaheuristic algorithms recently presented by literature. The obtained results and a properly arranged ANOVA analysis highlight the superiority of the proposed approach in tackling the scheduling problem under investigation.

Commuter Shopping : A study in understanding commuting in the context of shopping

OpenAIRE

Andersson, Åsa; Skoog, Sara; Svensson, Johanna

2014-01-01

Background For ages people have commuted to work, or to other activities, located outside their home municipality. Statements found indicate that the basic decision for commuting are based on utility maximisation and no matter what the character of the benefit is; it should be higher than what can be found closer to the home location. This thesis aims to investigate if people are also commuting with the purpose of obtaining benefits from shopping. The shopping location will in this thesis be ...

Retail Shopping Lists

DEFF Research Database (Denmark)

Schmidt, Marcus

2012-01-01

categories. An association between the frequency of a brand's appearance on lists and the amount of money spent on advertising the brand could not be found. A strong link between brands, prices and store names is revealed. Price in the majority of cases refers to brands rather than to product categories......The paper addresses consumers' shopping lists. The current study is based on a survey of 871 lists collected at retail grocery stores. Most items on shopping lists appear on the product category level rather than the brand level. The importance of the brand level varies considerably across product...

Growing Shopping Malls and Behavior of Urban Shoppers

OpenAIRE

Rajagopal

2009-01-01

Shopping malls contribute to business more significantly than traditional markets which were viewed as simple convergence of supply and demand. Shopping malls attract buyers and sellers, and induce customers providing enough time to make choices as well as a recreational means of shopping. However, competition between malls, congestion of markets and traditional shopping centers has led mall developers and management to consider alternative methods to build excitement with customers. This stu...

Designing electronic shops, persuading consumers to buy

DEFF Research Database (Denmark)

Dormann, Claire

2000-01-01

The purpose of this article is to show how to design persuasive and successful Web shops. An approach to commercial site design that draws on theories of visual persuasion is proposed. We focus on the role of emotion. Images in an ad are typically meant to create some emotional disposition toward....... To strengthen the discussion, an evaluation of shop home pages, situated within the perspective of visual persuasion is presented. This study has given some indications that viewers form distinctive emotional impressions from shop designs. Thus, by building on visual persuasion theories, we can learn how...... to design seductive Web shops....

Occupational exposure to chromium, copper and arsenic during work with impregnated wood in joinery shops.

Science.gov (United States)

Nygren, O; Nilsson, C A; Lindahl, R

1992-10-01

CCA-impregnated timber contains copper, chromium and arsenic (CCA), and occupational exposure to wood dust as well as the CCA compounds may occur in work with such timber. Dust from commercially available impregnated wood has been found to contain hexavalent chromium, which is regarded as a carcinogen. Apart from determinations of the total amounts of the CCA compounds, specific determination of hexavalent chromium is therefore essential. Selective methods have been applied for control of the work environment in six joinery shops. The mean exposure to wood dust was found to be below 1 mg m-3. The mean airborne concentration of arsenic around various types of joinery machines was in the range from 0.54 to 3.1 micrograms m-3. No hexavalent chromium was detected in any samples and no increased concentrations of arsenic were found in urine from the workers. The presence of arsenic in the work-room air must be considered for appropriate assessment of the occupational environment in joinery shops.

DESIGN OF A HYPERHEURISTIC FOR PRODUCTION SCHEDULING IN JOB SHOP ENVIRONMENTS DISEÑO DE UNA HIPERHEURISTICA PARA LA PROGRAMACION DE LA PRODUCCIÓN EN AMBIENTES JOB SHOP

Directory of Open Access Journals (Sweden)

Omar Danilo Castrillón

2010-08-01

Full Text Available The objective of the present work is to diminish the total process time (Makespan and to increase the machine process time, by diminishing the idle time in a job-shop environment. Through the design of a hyper-heuristic based on an ant colony and genetic algorithms. This work is developed in two phases: in the first phase, a hyper-heuristic identification and definition is carried out for sequencing processes in job shop environments. In the second phase, the system effectiveness in the traditional production programming is shown. In the investigation project, an enterprise from the metal mechanic sector was chosen, where by means of a combination of an ant colony and genetic algorithms, the optimal route for an order is scheduled, achieving the optimization or suboptimization of its respective total process time in an upper percentage of 95%.El objetivo del presente trabajo es disminuir el tiempo de proceso (Makespan e incrementar el tiempo de trabajo de las maquinas, diminuyendo el tiempo de ocio en ambientes de Job Shop, a través del diseño de una Hiper-heurística basada en colonia de hormigas y algoritmos genéticos. Este trabajo se desarrolla en dos etapas: en la primera se realiza la definición e identificación de una Hiper-heurística para la secuenciación de procesos en ambientes Job shop. En la segunda etapa, es mostrada la efectividad del sistema en la programación de la producción. En el proyecto de investigación, se seleccionó una empresa del sector metalmecánico, donde por medio de una combinación de colonia de hormigas y algoritmos genéticos, se programa la ruta óptima para un pedido, logrando la optimización o suboptimización de su respectivo tiempo total de proceso en un porcentaje superior al 95%.

The 3D virtual environment online for real shopping

OpenAIRE

Khalil, Nahla

2015-01-01

The development of information technology and Internet has led to rapidly progressed in e-commerce and online shopping, due to the convenience that they provide consumers. E-commerce and online shopping are still not able to fully replace onsite shopping. In contrast, conventional online shopping websites often cannot provide enough information about a product for the customer to make an informed decision before checkout. 3D virtual shopping environment show great potential for enhancing e-co...

RURAL CUSTOMER SATISFACTION TOWARDS ONLINE SHOPPING IN POLLACHI TALUK

OpenAIRE

K. Jayaprakash; A. Pavithra

2017-01-01

Online shopping is a recent phenomenon in electronic commerce and its definitely going to be the future of shopping in the world. It is user friendly compare to in store shopping because consumers can just complete his requirements just with a click of mouse without leaving their home. In the present work, the researcher intended to analyze the most preferred online shopping website, factors influencing the rural customers towards online shopping and to analyze the level satisfaction of the ...

Design of an automatic production monitoring system on job shop manufacturing

Science.gov (United States)

Prasetyo, Hoedi; Sugiarto, Yohanes; Rosyidi, Cucuk Nur

2018-02-01

Every production process requires monitoring system, so the desired efficiency and productivity can be monitored at any time. This system is also needed in the job shop type of manufacturing which is mainly influenced by the manufacturing lead time. Processing time is one of the factors that affect the manufacturing lead time. In a conventional company, the recording of processing time is done manually by the operator on a sheet of paper. This method is prone to errors. This paper aims to overcome this problem by creating a system which is able to record and monitor the processing time automatically. The solution is realized by utilizing electric current sensor, barcode, RFID, wireless network and windows-based application. An automatic monitoring device is attached to the production machine. It is equipped with a touch screen-LCD so that the operator can use it easily. Operator identity is recorded through RFID which is embedded in his ID card. The workpiece data are collected from the database by scanning the barcode listed on its monitoring sheet. A sensor is mounted on the machine to measure the actual machining time. The system's outputs are actual processing time and machine's capacity information. This system is connected wirelessly to a workshop planning application belongs to the firm. Test results indicated that all functions of the system can run properly. This system successfully enables supervisors, PPIC or higher level management staffs to monitor the processing time quickly with a better accuracy.

48 CFR 252.227-7033 - Rights in shop drawings.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Rights in shop drawings... of Provisions And Clauses 252.227-7033 Rights in shop drawings. As prescribed in 227.7107-(1)(c), use the following clause: Rights in Shop Drawings (APR 1966) (a) Shop drawings for construction means...

48 CFR 1952.227-77 - Rights in shop drawings.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

Determinants of Customer Continuance Intention of Online Shopping

Directory of Open Access Journals (Sweden)

Al-maghrabi, T.

2011-01-01

Full Text Available The purpose of this study is to clarify theory and identify factors that could explain the level of continuance intention of e-shopping. A revised technology acceptance model integrates expectation confirmation theory and investigates effects of age differences. An online survey of internet shoppers in Saudi Arabia. Structural equation modelling and invariance analysis confirm model fit. The findings confirm that perceived usefulness, enjoyment and social pressure are determinants of e-shopping continuance. The structural weights are mostly equivalent between young and old but the regression path from perceived usefulness to social pressure is stronger for younger respondents. This research moves beyond e-shopping intentions to factors affecting e-shopping continuance, explaining 55% of intention to continue shopping online. Online strategies cannot ignore direct and indirect effects on continuance intentions. The findings contribute to literature on internet shopping and continuance intentions in the context of Saudi Arabia.

An Exploratory Analysis of Online Shopping Behavior in Turkey

Directory of Open Access Journals (Sweden)

Adnan Veysel Ertemel

2017-06-01

Full Text Available Alongside the technologic developments, transformation in user behavior and business models has been observed. New areas and models are emerged in a lot of grounds like the communication of people or daily activities. So a new face put for shopping behavior by the e-commerce, which is one of the novelties. This study tries to research online shopping behavior in Turkey. With a quantitative research, device usage, the reasons behind to shop or not to shop online, online shopping category and e-commerce site preferences, payment methods, international e-commerce and online marketplace usage is investigated. As implications of the research, “saving time“ is found to be the foremost reason for shopping online in Turkey and “travel and bookings” category is found as the most shopped category among the results of the survey.

Specific energy use in Swedish and Norwegian shopping malls

Energy Technology Data Exchange (ETDEWEB)

Stensson, Sofia; Axell, Monica (SP Energy Technology, Boraas (Sweden)); Smaage, Kjell Petter (Evotek AS (Norway)); Fahlen, Per (Chalmers Univ. of Technology, Building Services Engineering, Goeteborg (Sweden))

2009-07-01

The prevalence of shopping malls is growing worldwide. Internationally, there are differences in energy use and system solutions due to local outdoor climate, available energy resources, prices, national building regulations, traditions etc. On the other hand, tenants are usually international chains and they often have the same demands regarding indoor climate, system solutions etc. irrespective of the national differences. Shopping malls overall tends to have large lighting loads, high population density and, hence, a large air conditioning demand. There is also an apparent trend towards increasing glass surfaces and such design feature affects the energy balance of the building. For those interested in the energy efficiency of the building and its installations, it is interesting to know how different system solutions affect the energy use. Benchmarking between buildings gives valuable insight to energy efficient design and operation. However, available information on energy use for such benchmarking in shopping malls is still rather limited. This study investigates shopping malls in Sweden and Norway. Available national statistical data on retail and shopping malls are reviewed. Further building statistical data were collected from building owners and managers, covering energy use in 41 shopping malls. Additional energy use data for 115 shops, within three of these shopping malls were also collected. The building statistical data shows that the average energy use in Norwegian and Swedish shopping malls are approximately 291 and 279 kWh/m2/year respectively. The highest energy use exceeds the lowest figure by approximately 50 percent, indicating a significant potential for improvement. Results also show a wide deviation in energy use of the different shops in a shopping mall. The paper further provides a discussion concerning alternative benchmarking methods and necessary improvements to make valid conclusions regarding energy use in shopping malls.

Turning shopping habits of young consumers into green

NARCIS (Netherlands)

Bialkova, Svetlana; van 't Erve, Sanne; van Hoof, Joris Jasper; Pruyn, Adriaan T.H.; Bigné, Enrique

2014-01-01

Consumers have strong shopping habits, and although being aware of sustainable issues, they hardly do green shopping. Therefore, a challenging question is: how to break the old shopping habits and turn those into green? The current study addresses this question looking at barriers and potential

Typically Female Features in Hungarian Shopping Tourism

Directory of Open Access Journals (Sweden)

Gábor Michalkó

2006-06-01

Full Text Available Although shopping has been long acknowledged as a major tourist activity, the extent and characteristics of shopping tourism have only recently become the subject of academic research and discussion. As a contribution to this field of knowledge, the paper presents the characteristics of shopping tourism in Hungary, and discusses the typically female features of outbound Hungarian shopping tourism. The research is based on a survey of 2473 Hungarian tourists carried out in 2005. As the findings of the study indicate, while female respondents were altogether more likely to be involved in tourist shopping than male travellers, no significant difference was experienced between the genders concerning the share of shopping expenses compared to their total travel budget. In their shopping behaviour, women were typically affected by price levels, and they proved to be both more selfish and more altruistic than men by purchasing more products for themselves and for their family members. The most significant differences between men and women were found in their product preferences as female tourists were more likely to purchase typically feminine goods such as clothes, shoes, bags and accessories, in the timing of shopping activities while abroad, and in the information sources used by tourists, since interpersonal influences such as friends’, guides’ and fellow travellers’ recommendations played a higher role in female travellers’ decisions.

Why Shops Close Again : An Evolutionary Perspective on the Deregulation of Shopping Hours

OpenAIRE

Kosfeld, M.

1999-01-01

This paper introduces a new perspective on the deregulation of shopping hours based on ideas from evolutionary game theory. We study a retail economy where shopping hours have been deregulated recently. It is argued that first, the deregulation leads to a coordination problem between store owners and customers, and second, the ‘solution’ to this problem depends on the specific cost structure of stores and the preferences of customers. In particular, it may happen that, even if extended shoppi...

Retailing and Shopping on the Internet.

Science.gov (United States)

Rowley, Jennifer

1996-01-01

Internet advertising and commercial activity are increasing. This article examines challenges facing the retail industry on the Internet: location; comparison shopping; security, especially financial transactions; customer base and profile; nature of the shopping experience; and legal and marketplace controls. (PEN)

Equipment for welding of details and joints of plastic pipes in work shop conditions and at pipelines

International Nuclear Information System (INIS)

Doronin, V.A.

1988-01-01

A range of welding machines for operation in workshop conditions and at pipelines is presented. Set of welding equipment for mobile shop, producing prototypes, and mobile facility are developed. In 1989 they will provide the whole operation cycle of production and mounting of details and units of plastic tubes and will enable to organize the centralized production of welded and shaped details in the branch, thus excluding the shortage of these details. 8 refs.; 6 figs.; 2 tabs

An Improved Version of Discrete Particle Swarm Optimization for Flexible Job Shop Scheduling Problem with Fuzzy Processing Time

Directory of Open Access Journals (Sweden)

Song Huang

2016-01-01

Full Text Available The fuzzy processing time occasionally exists in job shop scheduling problem of flexible manufacturing system. To deal with fuzzy processing time, fuzzy flexible job shop model was established in several papers and has attracted numerous researchers’ attention recently. In our research, an improved version of discrete particle swarm optimization (IDPSO is designed to solve flexible job shop scheduling problem with fuzzy processing time (FJSPF. In IDPSO, heuristic initial methods based on triangular fuzzy number are developed, and a combination of six initial methods is applied to initialize machine assignment and random method is used to initialize operation sequence. Then, some simple and effective discrete operators are employed to update particle’s position and generate new particles. In order to guide the particles effectively, we extend global best position to a set with several global best positions. Finally, experiments are designed to investigate the impact of four parameters in IDPSO by Taguchi method, and IDPSO is tested on five instances and compared with some state-of-the-art algorithms. The experimental results show that the proposed algorithm can obtain better solutions for FJSPF and is more competitive than the compared algorithms.

Método para definição de layout em sistemas job-shop baseado em dados históricos Historical data-based job-shop layout systems definition method

Directory of Open Access Journals (Sweden)

Maurício Tomelin

2010-01-01

Full Text Available O presente trabalho propõe um método para a solução do problema de definição de layout tipo job-shop baseado em dados históricos de produção, recursos disponíveis e características de produção. Os parâmetros utilizados foram a quantidade total e a frequência de vendas, a lucratividade, o tempo total de processamento e o tempo de espera de cada produto, gerando assim a classificação dos produtos. Os roteiros de produção foram comparados e, em função dos parâmetros, foi determinado o grau de importância de cada ligação entre os recursos. As ligações foram submetidas a um modelo matemático para a determinação da posição de cada recurso no layout. O método desenvolvido foi aplicado a uma empresa de usinagem com característica de job-shop. Os dados submetidos ao método permitiram uma sugestão de layout que tem como objetivo minimizar a distância dos recursos de processamento.This paper proposes a method for solving the job-shop layout problem definition, based on historical production data, available resources and production characteristics. The products were classified according to total sales, sales frequency, profitability, total processing time and stand-by time. The production path was compared and the degree of importance of each link between resources was determined. Path comparisons were made to quantify the same routes and the route differences, generating similar routes. The links were submitted to a mathematical model to determine the position of resources in the layout. The method developed was applied to a machining company with a job-shop profile. When the company's data was subjected to the method, it enabled the development of a layout, the main goal of which was to minimize distances between product-processing resources.

Impact of e-shopping on shopping-related travel behaviour: Analyses of the Netherlands Mobility Panel data.

NARCIS (Netherlands)

Hoogendoorn-Lanser, S.; Olde Kalter, Marie-José José Theresia; Schaap, Nina

2015-01-01

From the moment e-shopping emerged, there are speculations about the impact that would have on personal mobility. Questions about the impact of e-shopping on mobility increase due to media coverage on the sharp increase in turnover of Internet purchases and the increasing number of consumers that

Measuring consumer perceptions of online shopping convenience

OpenAIRE

Ferreira, Margarida Bernardo

2016-01-01

The aim of this master thesis is to identify which dimensions of convenience affect consumers’ intention of using online shopping. Also it explores a conceptual model to measuring consumer perceptions of online shopping convenience. This paper contains prospects about online consumer behavior, and the results have important implications for retailers, managers and marketers, related to online shopping strategies. An empirical investigation was carried out to test the hypotheses. In order t...

CERN SHOP CHRISTMAS SALE

CERN Multimedia

Visits & Exhibition Service

2000-01-01

Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 12 to Thursday 14 December from 10.00 to 16.00.   Sweat-shirt col zippé, grey, blue, black (M, L, XL) 30.- Sweat-shirt col polo, grey, collar blue (M, L, XL) 30.- T-shirt, black, (M, L, XL) 15.- WWW T-shirt, white, bordeau (M, L, XL) 15.- CERN silk tie (3 colours) 33.- Fancy silk tie (blue, bordeau 25.- Silk scarf (blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- New model of CERN watch 25.- New CERN baseball cap 10.- Antimatter (English/anglais) 30.- The Search for Infinity (French, Italian, English,) 35.- Auf der Suche nach dem Unendlichen 45.- If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs (Shop will be closed at 12.00 on 22.12.).

An architecture for agile shop floor control systems

DEFF Research Database (Denmark)

Langer, Gilad; Alting, Leo

2000-01-01

as shop floor control. This paper presents the Holonic Multi-cell Control System (HoMuCS) architecture that allows for design and development of holonic shop floor control systems. The HoMuCS is a shop floor control system which is sometimes referred to as a manufacturing execution system...

Tourist shopping behavior in a historic downtown area

NARCIS (Netherlands)

Kemperman, A.D.A.M.; Borgers, A.W.J.; Timmermans, H.J.P.

2009-01-01

Shopping is one of the most important activities for tourists. The purpose of this study is to describe and predict tourist shopping route choice behavior in a downtown historic center. Reported routes of tourists in the downtown shopping area of Maastricht, located in the Southern part of the

The impact of science shops on university research and education

DEFF Research Database (Denmark)

Hende, Merete; Jørgensen, Michael Søgaard

This report discusses the impact from university-based science shops on curricula and research. Experience from science shops show that besides assisting citizen groups, science shops can also contribute to the development of university curricula and research. This impact has been investigated...... through the SCIPAS questionnaire sent out to science shops and through follow-up interviews with employees from nine different university-based science shops and one university researcher. Not all the cases call themselves science shops, but in the report the term 'science shop' will be used most...... way or the other has had impact on university curricula and/or research. The analysis and the case studies have theoretically been based on literature on universities and education and research as institutions and a few articles about the impact of science shops on education and research. The analysis...

E-COMMERCE FACTORS INFLUENCING CONSUMERS‘ ONLINE SHOPPING DECISION

Directory of Open Access Journals (Sweden)

Živilė Baubonienė

2015-12-01

Full Text Available Purpose – The purpose of this paper is to look at the factors driving online shopping and to develop an understanding of the factors influencing the online shopping by the consumers. This is done by exploring the factors that encourage consumers to shop online through analysis of such advantages as security, fast delivery, comparable price, convenience, cheaper prices and a wider choice. At the same time, the research project reveals the factors that are discouraging for consumers and the benefits received by buyers making purchases online. Specifically, the research explores how online shopping can be affected by such factors as age, gender or occupation. Design/methodology/approach – The factors that affect the consumer online shopping have been disclosed through quantitative research by analysing data collected via a web‐based questionnaire survey. The sample consisted of 183 Lithuanian consumers who were purchasing online. Findings –The empirical findings of this study indicate that the main factors influencing consumers to shop online are convenience, simplicity and better price. Analysis of socio-demographical characteristics such as gender has shown that men shop more often online because of the lower price. Respondents of the 25–35 year age group more often choose shopping online for such reasons as lack of time and a wide range of products. The most beneficial factor of shopping online was identified as a possibility to compare prices and buy at a lower price. Research limitations/implications – This study was done regarding only general conditions and the findings may not necessarily be applicable to a particular e-business. Therefore, in the future it would be highly encouraged to examine consumers’ attitudes towards specialized online shopping websites to look for differences by kind of products or services.Practical implications – Attributes identified by this study could help e-business developers to forme their

Approximation algorithms for the parallel flow shop problem

NARCIS (Netherlands)

X. Zhang (Xiandong); S.L. van de Velde (Steef)

2012-01-01

textabstractWe consider the NP-hard problem of scheduling n jobs in m two-stage parallel flow shops so as to minimize the makespan. This problem decomposes into two subproblems: assigning the jobs to parallel flow shops; and scheduling the jobs assigned to the same flow shop by use of Johnson's

Product Characteristics and Internet Shopping Intentions.

Science.gov (United States)

Vijayasarathy, Leo R.

2002-01-01

Discussion of electronic commerce and online marketing focuses on an empirical study that investigated differences between Internet shopping intentions for products categorized by cost and tangibility. Highlights include hypotheses; respondent characteristics; results that showed that intentions to shop using the Internet differ by tangibility of…

Rental Values in UK Shopping Malls

NARCIS (Netherlands)

Yuo, Tony Shun-Te; Lizieri, Colin; McCann, Phillip; Crosby, Neil

This paper employs a unique dataset to analyse the retail rental levels of 1108 retail tenants in 148 UK regional shopping malls. The dataset integrates information regarding the characteristics of the shopping centre, the individual retailer, the brand, the individual unit occupied, the tenancy

Cellular Phone Users- Willingness to Shop Online

OpenAIRE

Norazah Mohd Suki; Norbayah Mohd Suki

2009-01-01

This study aims to identify cellular phone users- shopping motivating factors towards online shopping. 100 university students located in Klang Valley, Malaysia were involved as the respondents. They were required to complete a set of questionnaire and had to own a cellular phone in order to be selected as sample in this study. Three from five proposed hypotheses were supported: purchasing information, shopping utilities and service quality. As a result, marketers and retailers should concent...

CONSUMER BEHAVIOUR AND ATTITUDE TOWARDS ONLINE SHOPPING

OpenAIRE

S. Nethra; Dr. V. T. Dhanaraj

2016-01-01

The popularity of online shopping has caught the attention of many peoples. Many studies have been done in developed nations to know about the attitude and behaviour of consumers towards online shopping. The research is focused on consumer behaviour and attitude towards online shopping in Coimbatore district. The study is based on primary data which has been collected by issuing questionnaire to 200 respondents residing in Coimbatore district by adopting convenient sampling method. The stat...

Passion and dependency in online shopping activities.

Science.gov (United States)

Wang, Chih-Chien; Yang, Hui-Wen

2007-04-01

This study examines the influence of harmonious passion (HP) and obsessive passion (OP) to online shopping dependency. The results show that both HP and OP might lead to online shopping dependency and online shoppers with OP are more dependent on online shopping activities. In addition, this study also found out that HP and OP could be denoted as a sequence of different intensities of passion, where HP might be a necessity of OP.

Breaking Out of the Local: International dimensions of science shops

Directory of Open Access Journals (Sweden)

Caspar DeBok

2008-09-01

Full Text Available In this article we want to give an overview of the international dimension and the interest of the European Union (EU in the concept of Science Shops. The European Commission (EC manages the day-to-day business by initiating and implementing EU policies and spending EU funds. The EC support for Science Shops has been an important factor for the international interest and progress of the Science Shop movement. This article will not give detailed information about daily routines of a Science Shop. Detailed information about the Science Shop concept can be found at the Living Knowledge website (www.livingknowledge.org. Living Knowledge represents the international Science Shop Network. In this article international developments of the Science Shop Network, like the project TRAMS, and Science Shop backgrounds will be linked with past and new EU policies like the EU 7th Framework Programme for Research. It shows how community-based research does not only have a local dimension. The international Science Shop activities show the strengths of international cooperation to break out of the local and to bring local issues on the international agenda. Detailed information about the Science Shop concept and daily routines of a Science Shop can be found at the Living Knowledge website (www.livingknowledge.org, e.g. at the FAQ section and in the toolbox.

Power Service Shops

Data.gov (United States)

Federal Laboratory Consortium — TVA's Power Service Shops provides expert repair and maintenance of power system components and large industrial equipment. With world-class maintenance facilities...

ISSN 2073 ISSN 2073-9990 East Cent. Afr. J. surg. (Online) 90 East ...

African Journals Online (AJOL)

DELL

East and Central African Journal of Surgery. ... as the 3D cone beam CT machines which reduce exposure to irradiations, .... effect is closely related to the depth of impaction and height of the body of the mandible. ... extraction based on mere speculation or expectation of a sequelae, however a joint committee on third molar.

What do we know about consumer m-shopping behaviour?

OpenAIRE

Marriott, Hannah; Williams, Michael; Dwivedi, Yogesh

2017-01-01

Purpose – This paper provides a review of mobile shopping (m-shopping) acceptance literature to bring international marketing and consumer research attention to m-shopping acceptance factors and limitations in current understandings to propose recommendations for further academic and retailing attention.\\ud Design/methodology – Keyword searches identified consumer-focused literature across mobile commerce, mobile shopping, mobile browsing, and mobile purchasing, published in English language ...

Hedonic Motivations for Online Shopping

OpenAIRE

Pui-Lai To; E-Ping Sung

2014-01-01

The purpose of this study is to investigate hedonic online shopping motivations. A qualitative analysis was conducted to explore the factors influencing online hedonic shopping motivations. The results of the study indicate that traditional hedonic values, consisting of social, role, self-gratification, learning trends, pleasure of bargaining, stimulation, diversion, status, and adventure, and dimensions of flow theory, consisting of control, curiosity, enjoyment, and telepresence, exist in t...

An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

OpenAIRE

Lavlesh Kumar Sharma; Ravindra Mohan Saxena

2014-01-01

In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

Internet Shopping Behavior of College of Education Students

Science.gov (United States)

Kiyici, Mubin

2012-01-01

Internet is an important facilitator for human and humans use this medium almost every phase. As a shopping medium, internet attract human so attract researcher. Younger people can adapt newer technologies so they can adapt internet as shopping tool. In this research it is tried to define college of education students' online shopping behavior and…

Towards an understanding of Internet-based problem shopping behaviour: The concept of online shopping addiction and its proposed predictors

Science.gov (United States)

ROSE, SUSAN; DHANDAYUDHAM, ARUN

2014-01-01

Background: Compulsive and addictive forms of consumption and buying behaviour have been researched in both business and medical literature. Shopping enabled via the Internet now introduces new features to the shopping experience that translate to positive benefits for the shopper. Evidence now suggests that this new shopping experience may lead to problematic online shopping behaviour. This paper provides a theoretical review of the literature relevant to online shopping addiction (OSA). Based on this selective review, a conceptual model of OSA is presented. Method: The selective review of the literature draws on searches within databases relevant to both clinical and consumer behaviour literature including EBSCO, ABI Pro-Quest, Web of Science – Social Citations Index, Medline, PsycINFO and Pubmed. The article reviews current thinking on problematic, and specifically addictive, behaviour in relation to online shopping. Results: The review of the literature enables the extension of existing knowledge into the Internet-context. A conceptual model of OSA is developed with theoretical support provided for the inclusion of 7 predictor variables: low self-esteem, low self-regulation; negative emotional state; enjoyment; female gender; social anonymity and cognitive overload. The construct of OSA is defined and six component criteria of OSA are proposed based on established technological addiction criteria. Conclusions: Current Internet-based shopping experiences may trigger problematic behaviours which can be classified on a spectrum which at the extreme end incorporates OSA. The development of a conceptual model provides a basis for the future measurement and testing of proposed predictor variables and the outcome variable OSA. PMID:25215218

Towards an understanding of Internet-based problem shopping behaviour: The concept of online shopping addiction and its proposed predictors.

Science.gov (United States)

Rose, Susan; Dhandayudham, Arun

2014-06-01

Compulsive and addictive forms of consumption and buying behaviour have been researched in both business and medical literature. Shopping enabled via the Internet now introduces new features to the shopping experience that translate to positive benefits for the shopper. Evidence now suggests that this new shopping experience may lead to problematic online shopping behaviour. This paper provides a theoretical review of the literature relevant to online shopping addiction (OSA). Based on this selective review, a conceptual model of OSA is presented. The selective review of the literature draws on searches within databases relevant to both clinical and consumer behaviour literature including EBSCO, ABI Pro-Quest, Web of Science - Social Citations Index, Medline, PsycINFO and Pubmed. The article reviews current thinking on problematic, and specifically addictive, behaviour in relation to online shopping. The review of the literature enables the extension of existing knowledge into the Internet-context. A conceptual model of OSA is developed with theoretical support provided for the inclusion of 7 predictor variables: low self-esteem, low self-regulation; negative emotional state; enjoyment; female gender; social anonymity and cognitive overload. The construct of OSA is defined and six component criteria of OSA are proposed based on established technological addiction criteria. Current Internet-based shopping experiences may trigger problematic behaviours which can be classified on a spectrum which at the extreme end incorporates OSA. The development of a conceptual model provides a basis for the future measurement and testing of proposed predictor variables and the outcome variable OSA.

INDONESIAN CUSTOMER SATISFACTION IN ONLINE SHOPPING TRADING

OpenAIRE

Hermawan F.; Wijayanti S.H.

2018-01-01

This research aims to find out if the ease of shopping, site design, informative, comprehensive, and communication have a significant influence on the level of Indonesian customer satisfaction in online shopping transactions and how the impact to the word of mouth communication. Respondents of this study are the 250 students of Jakarta colleges. This study found that the variables of design, simplicity, and security have an influence on customer satisfaction in shopping online, while the info...

Modeling the Joint Choice Decisions on Urban Shopping Destination and Travel-to-Shop Mode: A Comparative Study of Different Structures

Directory of Open Access Journals (Sweden)

Chuan Ding

2014-01-01

Full Text Available The joint choice of shopping destination and travel-to-shop mode in downtown area is described by making use of the cross-nested logit (CNL model structure that allows for potential interalternative correlation along the both choice dimensions. Meanwhile, the traditional multinomial logit (MNL model and nested logit (NL model are also formulated, respectively. This study uses the data collected in the downtown areas of Maryland-Washington, D.C. region, for shopping trips, considering household, individual, land use, and travel related characteristics. The results of the model reveal the significant influencing factors on joint choice travel behavior between shopping destination and travel mode. A comparison of the different models shows that the proposed CNL model structure offers significant improvements in capturing unobserved correlations between alternatives over MNL model and NL model. Moreover, a Monte Carlo simulation for a group of scenarios assuming that there is an increase in parking fees in downtown area is undertaken to examine the impact of a change in car travel cost on the joint choice of shopping destination and travel mode switching. The results are expected to give a better understanding on the shopping travel behavior.

Urban artisanal gold shops and mercury emissions

International Nuclear Information System (INIS)

Cordy, P.; Veiga, M.; Carrasco, V.H.G.

2008-01-01

Artisanal miners in developing countries use mercury amalgamation processes to extract gold. The amalgams are then refined before being sold on to urban gold shops. The amalgams can often contain between 2 to 40 per cent mercury. Unburned amalgams are also often sold directly to gold shops. There are serious health risks for shop employees and nearby populations when the gold is melted and further purified. Studies have shown that mercury concentrations in the ambient air of gold shops often exceeds World Health Organization (WHO) limits by an order of magnitude or more. This study examined the practices and technologies used to refine gold in Latin America and Indonesia. The study compared and contrasted various refining methods and their resulting mercury emissions. Methods of reducing mercury emissions were also investigated, including a filtration system designed to capture 80 per cent of mercury emissions. Barriers to implementing mercury emissions reduction plans were also investigated. It was concluded that the design of urban gold shops must include condensers, fume hoods, and efficient mercury capture systems. 15 refs

An Interactive Web-based Learning System for Assisting Machining Technology Education

Directory of Open Access Journals (Sweden)

Min Jou

2008-05-01

Full Text Available The key technique of manufacturing methods is machining. The degree of technique of machining directly affects the quality of the product. Therefore, the machining technique is of primary importance in promoting student practice ability during the training process. Currently, practical training is applied in shop floor to discipline student’s practice ability. Much time and cost are used to teach these techniques. Particularly, computerized machines are continuously increasing in use. The development of educating engineers on computerized machines becomes much more difficult than with traditional machines. This is because of the limitation of the extremely expensive cost of teaching. The quality and quantity of teaching cannot always be promoted in this respect. The traditional teaching methods can not respond well to the needs of the future. Therefore, this research aims to the following topics; (1.Propose the teaching strategies for the students to learning machining processing planning through web-based learning system. (2.Establish on-line teaching material for the computer-aided manufacturing courses including CNC coding method, CNC simulation. (3.Develop the virtual machining laboratory to bring the machining practical training to web-based learning system. (4.Integrate multi-media and virtual laboratory in the developed e-learning web-based system to enhance the effectiveness of machining education through web-based system.

Nurses' shop stewards and their collaboration with management

DEFF Research Database (Denmark)

Bild, Tage; Hjalager, Anne-Mette; Lassen, Morten Staun

2009-01-01

Purpose - This study investigates the collaboration between Danish nurses' shop stewards and workplace management. The aim of the study is to track changes in workplace climate after a major structural reform of the health sector. Design/methodology/approach - The data source for the study...... is a comprehensive survey among union representatives in the health and care sectors. Findings - Generally, and not surprisingly, shops stewards maintain closer relations and a higher degree of loyalty to the nearest managers rather than management at higher levels in the hierarchy. It can also be demonstrated...... that more experienced shop stewards, those who have been employed in this position and in the workplace for the longest terms have more affirmative relations to management than less experienced shop stewards with shorter tenure. Those shop stewards who spend much time on the entitled duties are rewarded...

Relationships among Shopping Quality and Corporate Social Responsibility of Shopping Centers and Consumer Satisfaction: Case from Novi Sad (Serbia

Directory of Open Access Journals (Sweden)

Ivana Blešić

2014-02-01

Full Text Available Taking into consideration satisfied customer as necessary for business maintenance, companies are trying to discover determinants which have the biggest influence on their consumer satisfaction. Here are presented two factors that have influence on consumer satisfaction in shopping centers: quality of shopping and corporate social responsibility. In this research, each of these factors had six elements. The results of the regression analysis are that “Value for money in stores” (beta=0.387, p=0.000 has the greatest impact on satisfaction when shopping quality performance is concerned, and that “Retailer support for (national/local cultural and sport events“ (beta=0.333, p<0.001 has the greatest impact on satisfaction in the case of CSR performance. Further analysis showed the difference in consumer perception of corporate social responsibility, depending on their occupation and level of education. It is also important to mention that consumers with environment and empathic concern have higher scores perception of CSR. However, there is not statistically important difference in consumer perception of shopping quality in shopping centers

Effects of time of day on shopping behavior.

Science.gov (United States)

Chebat, J C

1999-04-01

Shoppers interviewed in a shopping mall at different times of the day show different activities within the mall and attitudes toward the products. Prices also vary with the time of the day. These results can be explained in terms of shopping values and the related demographic characteristics of the population visiting the shopping center at different times of the day.

A comparative analysis of the influence of economic culture on East and West German consumers' subjective product meaning

DEFF Research Database (Denmark)

Grunert, Klaus G.; Grunert, Suzanne C.

1993-01-01

of habitualization of their shopping behaviour. While the purchase of food products in West Germany is to a large extent characterized by low involvement and inertia, the same purc in East Germany seem to be characterized by high involvement and real decision-making. 8. These differences have implications...

Consumer Buying Behavior Towards Online Shopping Stores in Malaysia

OpenAIRE

Mehrdad Salehi

2011-01-01

The Internet as a global medium is quickly gaining interest and attractiveness as the most revolutionary marketing tool. The global nature of communication and shopping has as well redefined, seeing that it is the perfect vehicle for online shopping stores. Online convenient shop is mostly reflected in shorter time and less energy spent, including shipping cost reduction, less crowd and queues than real markets, unlimited time and space, which all increase convenience of shopping. Internet sh...

End-user Acceptance of Online Shopping Sites in India

OpenAIRE

Bolar K; Shaw B

2015-01-01

Online shopping sites have recently gained momentum in India. Since the ecommerce industry is in infancy state, customer (end user) satisfaction with the online shopping is the prime concern because decreasing customer satisfaction leads to negative electronic word of mouth (eWOM) which is very severe for the business. Through a dataset gathered from 127 online shopping customers in with respect to online shopping sites in India, this study investigates the role of website quality, informatio...

Multiattribute shopping models and ridge regression analysis

NARCIS (Netherlands)

Timmermans, H.J.P.

1981-01-01

Policy decisions regarding retailing facilities essentially involve multiple attributes of shopping centres. If mathematical shopping models are to contribute to these decision processes, their structure should reflect the multiattribute character of retailing planning. Examination of existing

MATERIALISTIC VALUES, SHOPPING, AND LIFE SATISFACTION IN ROMANIA

Directory of Open Access Journals (Sweden)

VALERIU FRUNZARU

2015-11-01

Full Text Available Numerous studies have shown that generally materialists are less happy than those lower in materialism. Several studies confirm that people who experience a lower level of life satisfaction are more interested in shopping; therefore materialism determines directly and indirectly (mediated by life satisfaction the desire of going shopping. There are only few studies that deal with this topic within Romanian consumers. The conceptual model proposed here was tested on a convenience sample of 390 Romanians. Using structural equation modelling, our findings confirm the hypothetical model only partially. Materialism leads to life dissatisfaction and shopping, but life dissatisfaction does not increase shopping. To the contrary, there is a positive relationship between life satisfaction and the desire for shopping. One possible explanation is that Romanians perceive materialism as a positive attitude. Anyway, nuances should be considered regarding the role of money and possession in bringing life satisfaction

Marketing activities of vape shops across racial/ethnic communities

OpenAIRE

Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B.; Sussman, Steve

2017-01-01

INTRODUCTION There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community’s demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by...

Online versus conventional shopping: consumers' risk perception and regulatory focus.

Science.gov (United States)

van Noort, Guda; Kerkhof, Peter; Fennis, Bob M

2007-10-01

In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a prevention focus. The findings in Study 1 demonstrate these effects by using self-report measures for risk perception and prevention focus. In Study 2, we replicated these findings and demonstrated that the effect of an online shopping environment carries over to behavior in a domain unrelated to shopping.

NON-FUNCTIONAL SHOPPING MOTIVES AMONG IRANIAN CONSUMERS

Directory of Open Access Journals (Sweden)

Shahriar AZIZI

2011-01-01

Full Text Available This study aims to explore the non functional shopping motives among Iranian consumers. In addition, the effects of marital status, gender, age and residential region as an indicator for social class on the non-functional shopping motives are investigated. This paper uses a self-reported and 15 items questionnaire. The analysis is done based on 363 returned and usable questionnaires. Multivariate analysis of variance is applied for this study. MANOVA results show that marital status, gender, age and region have different significant effects on the non-functional shopping motives among Iranian consumers.

What drives people? Analyzing leisure-shopping trip decision making

NARCIS (Netherlands)

de Ceunynck, T.; Kusumastuti, Diana; Hannes, E.; Janssens, D.; Wets, G.

2011-01-01

Because of the strong increase in the number of leisure-shopping trips, a shift towards more sustainable leisure-shopping behaviour is desirable. This can be attained by having a better insight into people’s reasoning in choosing a transport mode and shopping location for this type of activities.

E-shopping and its interactions with in-store shopping

NARCIS (Netherlands)

Farag, Sendy

2006-01-01

Nowadays, the Internet permeates society: for many people, life without the Internet is hard to imagine. E-shopping (searching and/or buying products online) has rapidly gained popularity in the past few years, and could affect consumers’ visits to stores. The goal of this research is to show which

Apparel shopping behavior of elderly men and women.

Science.gov (United States)

Chowdhary, U

1989-06-01

70 interested elderly (65 yr. and over) men and women participated in an investigation of older consumers' apparel-shopping behavior and satisfactions and dissatisfactions with available clothing and facilities. Analysis showed that the participants considered shopping ease, wide variety, and label/brand as some of the important factors while shopping for clothes. The respondents were satisfied with good selection, closeness of the mall, and reasonable sales. However, their dissatisfactions ranged from service to fit and size, youthful styles, and abundance of imported clothing. In-store displays, mail order catalogs, and window shopping were the most commonly used sources of apparel information. Several implications of the findings were discussed and suggestions for further research were made.

Energy efficiency in U.K. shopping centres

Science.gov (United States)

Mangiarotti, Michela

Energy efficiency in shopping centres means providing comfortable internal environment and services to the occupants with minimum energy use in a cost-effective and environmentally sensitive manner. This research considers the interaction of three factors affecting the energy efficiency of shopping centres: i) performance of the building fabric and services ii) management of the building in terms of operation, control, maintenance and replacement of the building fabric and services, and company's energy policy iii) occupants' expectation for comfort and awareness of energy efficiency. The aim of the investigation is to determine the role of the above factors in the energy consumption and carbon emissions of shopping centres and the scope for reducing this energy usage by changing one or all the three factors. The study also attempts to prioritize the changes in the above factors that are more cost-effective at reducing that energy consumption and identify the benefits and main economic and legal drivers for energy efficiency in shopping centres. To achieve these targets, three case studies have been analysed. Using energy data from bills, the performance of the selected case studies has been assessed to establish trends and current energy consumption and carbon emissions of shopping centres and their related causes. A regression analysis has attempted to break down the energy consumption of the landlords' area by end-use to identify the main sources of energy usage and consequently introduce cost-effective measures for saving energy. A monitoring and occupants' survey in both landlords' and tenants' areas have been carried out at the same time to compare the objective data of the environmental conditions with the subjective impressions of shoppers and shopkeepers. In particular, the monitoring aimed at assessing the internal environment to identify possible causes of discomfort and opportunities for introducing energy saving measures. The survey looked at

Cue reactivity towards shopping cues in female participants.

Science.gov (United States)

Starcke, Katrin; Schlereth, Berenike; Domass, Debora; Schöler, Tobias; Brand, Matthias

2013-03-01

Background and aims It is currently under debate whether pathological buying can be considered as a behavioural addiction. Addictions have often been investigated with cue-reactivity paradigms to assess subjective, physiological and neural craving reactions. The current study aims at testing whether cue reactivity towards shopping cues is related to pathological buying tendencies. Methods A sample of 66 non-clinical female participants rated shopping related pictures concerning valence, arousal, and subjective craving. In a subgroup of 26 participants, electrodermal reactions towards those pictures were additionally assessed. Furthermore, all participants were screened concerning pathological buying tendencies and baseline craving for shopping. Results Results indicate a relationship between the subjective ratings of the shopping cues and pathological buying tendencies, even if baseline craving for shopping was controlled for. Electrodermal reactions were partly related to the subjective ratings of the cues. Conclusions Cue reactivity may be a potential correlate of pathological buying tendencies. Thus, pathological buying may be accompanied by craving reactions towards shopping cues. Results support the assumption that pathological buying can be considered as a behavioural addiction. From a methodological point of view, results support the view that the cue-reactivity paradigm is suited for the investigation of craving reactions in pathological buying and future studies should implement this paradigm in clinical samples.

ShopGirls Shine in Eco-Marathon

Science.gov (United States)

Stowell, Shante

2011-01-01

The ShopGirls of Granite Falls (WA) High School are the first-ever all-female team to successfully design, build, and race a prototype diesel car in the Shell Eco-marathon. The team took first place in the diesel fuel-efficiency category with a vehicle that achieved 470 miles per gallon! The idea for the ShopGirls came when Vervia Gabriel, career…

The impact of science shops on university research and education

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard

2000-01-01

Science shops are mediating agencies at universities that give citizens and citizen groups access to the resources of the university through co-operation with students and researchers. Science shops have three aims: to support citizens and citizen groups in their efforts getting influence...... to the impact of science shops on universities and on society are discussed. A typology for the different types of knowledge requested by citizens and citizen groups through science shops is presented (documentation, knowledge building, development of new perspectives). As important aspects of the potentials......, prerequisites and limits to the impact of science shops are discussed the networking between the science shop and the researchers and teachers and with the citizens and other external actors, and the content and the structure of the curricula at the university....

Consumer protection and internet shopping

OpenAIRE

Blažková, Lenka

2010-01-01

The diploma thesis is devoted to the issue of online shopping. Its aim is to analyze internet shopping and see the rights and obligations of consumers and sellers, which are based on current legislation. The thesis is divided into two parts. The theoretical part deals with purchase over the internet and its regulations. There are explained the concepts internet, e-business and e-commerce and indicate the types of e-business and is mentioned certification of online stores. The practical part i...

Doctor and pharmacy shopping for controlled substances.

Science.gov (United States)

Peirce, Gretchen L; Smith, Michael J; Abate, Marie A; Halverson, Joel

2012-06-01

Prescription drug abuse is a major health concern nationwide, with West Virginia having one of the highest prescription drug death rates in the United States. Studies are lacking that compare living subjects with persons who died from drug overdose for evidence of doctor and pharmacy shopping for controlled substances. The study objectives were to compare deceased and living subjects in West Virginia for evidence of prior doctor and pharmacy shopping for controlled substances and to identify factors associated with drug-related death. A secondary data study was conducted using controlled substance, Schedule II-IV, prescription data from the West Virginia Controlled Substance Monitoring Program and drug-related death data compiled by the Forensic Drug Database between July 2005 and December 2007. A case-control design compared deceased subjects 18 years and older whose death was drug related with living subjects for prior doctor and pharmacy shopping. Logistic regression identified factors related to the odds of drug-related death. A significantly greater proportion of deceased subjects were doctor shoppers (25.21% vs. 3.58%) and pharmacy shoppers (17.48% vs. 1.30%) than living subjects. Approximately 20.23% of doctor shoppers were also pharmacy shoppers, and 55.60% of pharmacy shoppers were doctor shoppers. Younger age, greater number of prescriptions dispensed, exposure to opioids and benzodiazepines, and doctor and pharmacy shopping were factors with greater odds of drug-related death. Doctor and pharmacy shopping involving controlled substances were identified, and shopping behavior was associated with drug-related death. Prescription monitoring programs may be useful in identifying potential shoppers at the point of care.

Optimization process planning using hybrid genetic algorithm and intelligent search for job shop machining.

Science.gov (United States)

Salehi, Mojtaba; Bahreininejad, Ardeshir

2011-08-01

Optimization of process planning is considered as the key technology for computer-aided process planning which is a rather complex and difficult procedure. A good process plan of a part is built up based on two elements: (1) the optimized sequence of the operations of the part; and (2) the optimized selection of the machine, cutting tool and Tool Access Direction (TAD) for each operation. In the present work, the process planning is divided into preliminary planning, and secondary/detailed planning. In the preliminary stage, based on the analysis of order and clustering constraints as a compulsive constraint aggregation in operation sequencing and using an intelligent searching strategy, the feasible sequences are generated. Then, in the detailed planning stage, using the genetic algorithm which prunes the initial feasible sequences, the optimized operation sequence and the optimized selection of the machine, cutting tool and TAD for each operation based on optimization constraints as an additive constraint aggregation are obtained. The main contribution of this work is the optimization of sequence of the operations of the part, and optimization of machine selection, cutting tool and TAD for each operation using the intelligent search and genetic algorithm simultaneously.

Hazard perception and occupational injuries in the welders and lathe machine operators of Rawalpindi and Islamabad.

Science.gov (United States)

Shaikh, M A

2001-02-01

To study the prevalence of occupational injuries in the welders and lathe machine operators and their hazard perception. This study was conducted in the welders and lathe machine operators working in the welding and metal working shops in Rawalpindi and Islamabad. A cross-sectional survey was conducted by two trained health interviewers using uniform questionnaire with both close and open-ended questions. Two hundred and eight welders and 104 lathe machine operators were interviewed. Thirty nine (18.7%) welders and 27 (26%) lathe machine operators reported an injury in the past three months, while 63 (30.3%) welders and 76 (73.8%) lathe machine operators reported sustaining an injury in the past twelve months. However, only half of the welders and 31 (29.8%) lathe machine operators believed that their occupation was hazardous for health. For effective public health policy there is a need preventive education and enforcement of safety regulations for the informal occupational sector in Pakistan.

Flexible job shop scheduling problem in manufacturing

OpenAIRE

Curralo, Ana; Pereira, Ana I.; Barbosa, José; Leitão, Paulo

2013-01-01

This paper addresses a real assembly cell: the AIP-PRIMECA cell at the Université de Valenciennes et du Hainaut-Cambrésis, in France. This system can be viewed as a Flexible Job Shop, leading to the formulation of a Flexible Job Shop Scheduling Problem (FJSSP).

Multi-objective flexible job-shop scheduling problem using modified discrete particle swarm optimization.

Science.gov (United States)

Huang, Song; Tian, Na; Wang, Yan; Ji, Zhicheng

2016-01-01

Taking resource allocation into account, flexible job shop problem (FJSP) is a class of complex scheduling problem in manufacturing system. In order to utilize the machine resources rationally, multi-objective particle swarm optimization (MOPSO) integrating with variable neighborhood search is introduced to address FJSP efficiently. Firstly, the assignment rules (AL) and dispatching rules (DR) are provided to initialize the population. And then special discrete operators are designed to produce new individuals and earliest completion machine (ECM) is adopted in the disturbance operator to escape the optima. Secondly, personal-best archives (cognitive memories) and global-best archive (social memory), which are updated by the predefined non-dominated archive update strategy, are simultaneously designed to preserve non-dominated individuals and select personal-best positions and the global-best position. Finally, three neighborhoods are provided to search the neighborhoods of global-best archive for enhancing local search ability. The proposed algorithm is evaluated by using Kacem instances and Brdata instances, and a comparison with other approaches shows the effectiveness of the proposed algorithm for FJSP.

Effects of Website Interactivity on Online Retail Shopping Behavior

Science.gov (United States)

Islam, Hafizul

Motivations to engage in retail online shopping can include both utilitarian and hedonic shopping dimensions. To cater to these consumers, online retailers can create a cognitively and esthetically rich shopping environment, through sophisticated levels of interactive web utilities and features, offering not only utilitarian benefits and attributes but also providing hedonic benefits of enjoyment. Since the effect of interactive websites has proven to stimulate online consumer’s perceptions, this study presumes that websites with multimedia rich interactive utilities and features can influence online consumers’ shopping motivations and entice them to modify or even transform their original shopping predispositions by providing them with attractive and enhanced interactive features and controls, thus generating a positive attitude towards products and services offered by the retailer. This study seeks to explore the effects of Web interactivity on online consumer behavior through an attitudinal model of technology acceptance.

Online shopping behavior in offline retail stores : strategic value for companies?

OpenAIRE

Ferreira, José Pedro Santos

2015-01-01

In a world where e-tailing and traditional in-store shopping live together and complement each other in several shopping activities (Chu, et. al, 2010), little is known about the possibility of an emerging reality in which online and offline shopping merge into one single phenomenon. The purpose of this dissertation is to explore whether consumers are willing to engage in a shopping behavior inside retail stores in a way that is similar to the one they have when shopping online. Additionally,...

Evaluating machine-learning techniques for recruitment forecasting of seven North East Atlantic fish species

KAUST Repository

Fernandes, José Antonio

2015-01-01

The effect of different factors (spawning biomass, environmental conditions) on recruitment is a subject of great importance in the management of fisheries, recovery plans and scenario exploration. In this study, recently proposed supervised classification techniques, tested by the machine-learning community, are applied to forecast the recruitment of seven fish species of North East Atlantic (anchovy, sardine, mackerel, horse mackerel, hake, blue whiting and albacore), using spawning, environmental and climatic data. In addition, the use of the probabilistic flexible naive Bayes classifier (FNBC) is proposed as modelling approach in order to reduce uncertainty for fisheries management purposes. Those improvements aim is to improve probability estimations of each possible outcome (low, medium and high recruitment) based in kernel density estimation, which is crucial for informed management decision making with high uncertainty. Finally, a comparison between goodness-of-fit and generalization power is provided, in order to assess the reliability of the final forecasting models. It is found that in most cases the proposed methodology provides useful information for management whereas the case of horse mackerel is an example of the limitations of the approach. The proposed improvements allow for a better probabilistic estimation of the different scenarios, i.e. to reduce the uncertainty in the provided forecasts.

English Shop Signs and Brand Names

Directory of Open Access Journals (Sweden)

Parvaneh Khosravizadeh

2016-07-01

Full Text Available The present study tries to investigate the people’s attitude to the use of English words in TV commercials, brand-naming and shop signs in Iran and specifically in Tehran where due to the fact that it is the capital, more English might be used for the sake of foreigners. The widespread use of English shop signs and English brand names for recently produced goodsdrove the researchers to investigate peoples’ attitude as consumers from two aspects of age and education. To reach the research goal, a questionnaire was devised and distributed to 100 people at random selection probing their attitudes while considering two factors of age and education. The result of the research will mostly benefit sociolinguists and business marketers.Keywords: age, education, advertising, brand-naming, shop signs, globalization

E-commerce factors influencing consumers‘ online shopping decision

OpenAIRE

Baubonienė, Živilė; Gulevičiūtė, Gintarė

2015-01-01

Purpose – The purpose of this paper is to look at the factors driving online shopping and to develop an understanding of the factors influencing the online shopping by the consumers. This is done by exploring the factors that encourage consumers to shop online through analysis of such advantages as security, fast delivery, comparable price, convenience, cheaper prices and a wider choice. At the same time, the research project reveals the factors that are discouraging for consumers and the ben...

Customer Buying Behavior : - Online shopping towards electronic product

OpenAIRE

Wang, Dan; Yang, Liuzi

2010-01-01

ABSTRACT Online shopping in EU has been shown to a good potential market. The electronic equipment takes a high percent of the individuals shopping. Compared with other goods, online shopping of electronic goods adds great convenience to the life of the people. Buying electronic gadgets online gives customers an opportunity to find a great variety of product online, and customers can review a wide selection of products and find special offers and discount with the best deals online. In the co...

Online versus conventional shopping: Consumers' risk perception and regulatory focus

NARCIS (Netherlands)

van Noort, G.; Kerkhof, P.; Fennis, B.M.

2007-01-01

In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a

Online versus Conventional Shopping: Consumers' Risk Perception and Regulatory Focus

NARCIS (Netherlands)

van Noort, Guda; Kerkhof, Peter; Fennis, B.M.

2007-01-01

In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a

A Strategic Planning for a College Student-Segment Shopping Mall

OpenAIRE

Astri Anindya Sari; Hanson Endra Kusuma; Baskoro Tedjo

2011-01-01

In the midst of shopping mall development today, an understanding of consumer behaviors and preferences is absolutely a must if we want to plan successfuly a shopping mall. This knowledge will provide input for strategic planning so that the concept offered for shopping mall development will meet the consumers’ demand and may win the market competition. This study explores the preferences of students in Bandung as one of the potential market segments of the shopping mall. Qualitative study w...

Combined machine-readable and visually authenticated optical devices

Science.gov (United States)

Souparis, Hugues

1996-03-01

Optical variable devices are now widely used on documents or values. The most recent optical visual features with high definition, animation, brightness, special color tune, provide excellent first and second levels of authentication. Human eye is the only instrument required to check the authenticity. This is a major advantage of OVDs in many circumstances, such as currency exchange, ID street control . . . But, under other circumstances, such as automatic payments with banknotes, volume ID controls at boarders, ID controls in shops . . . an automatic authentication will be necessary or more reliable. When both a visual and automated authentication are required, the combination, on the same security component, of a variable image and a machine readable optical element is a very secure and cost effective solution for the protection of documents. Several techniques are now available an can be selected depending upon the respective roles of the machine readability and visual control.

A hybrid job-shop scheduling system

Science.gov (United States)

Hellingrath, Bernd; Robbach, Peter; Bayat-Sarmadi, Fahid; Marx, Andreas

1992-01-01

The intention of the scheduling system developed at the Fraunhofer-Institute for Material Flow and Logistics is the support of a scheduler working in a job-shop. Due to the existing requirements for a job-shop scheduling system the usage of flexible knowledge representation and processing techniques is necessary. Within this system the attempt was made to combine the advantages of symbolic AI-techniques with those of neural networks.

A multipurpose shopping trip model to assess retail agglomeration effects

NARCIS (Netherlands)

Arentze, T.A.; Oppewal, H.; Timmermans, H.J.P.

2005-01-01

Multipurpose shopping is a prominent and relevant feature of shopping behavior. However, no methodology is available to assess empirically how the demand for multipurpose shopping depends on retail agglomeration or, in general, the characteristics of retail supply, such as the numbers and types of

Outpatient-shopping behavior and survival rates in newly diagnosed cancer patients.

Science.gov (United States)

Chiou, Shang-Jyh; Wang, Shiow-Ing; Liu, Chien-Hsiang; Yaung, Chih-Liang

2012-09-01

To evaluate the appropriateness of the definition of outpatient-shopping behavior in Taiwanese patients. Linked study of 3 databases (Taiwan Cancer Registry, National Health Insurance [NHI] claim database, and death registry database). Outpatient shopping behavior was defined as making at least 4 or 5 physician visits to confirm a cancer diagnosis. We analyzed patient-related factors and the 5-year overall survival rate of the outpatient-shopping group compared with a nonshopping group. Using the household registration database and NHI database, we determined the proportion of outpatient shopping, characteristics of patients who did and did not shop for outpatient therapy, time between diagnosis and start of regular treatment, and medical service utilization in the shopping versus the nonshopping group. Patients with higher incomes were significantly more likely to shop for outpatient care. Patients with higher comorbidity scores were 1.4 times more likely to shop for outpatient care than patients with lower scores. Patients diagnosed with more advanced cancer were more likely to shop than those who were not. Patients might be more trusting of cancer diagnoses given at higher-level hospitals. The nonshopping groups had a longer duration of survival over 5 years. Health authorities should consider charging additional fees after a specific outpatient- shopping threshold is reached to reduce this behavior. The government may need to reassess the function of the medical sources network by shrinking it from the original 4 levels to 2 levels, or by enhancing the referral function among different hospital levels.

Technicians and Shop Owners

Science.gov (United States)

Overview page provides information for shops and technicians that repair or service motor vehicle air-conditioning systems, including information on proper training, approved equipment, and regulatory practices.

Online Infrastructure in Supply Chain for Hardware Shops

OpenAIRE

Sørensen , Karl ,

2014-01-01

Part 4: Private Services; International audience; This article describes how the Scandinavian network communication system DATEX was used to build an online infrastructure in a retail chain of privately owned hardware shops and Do-It-Yourself (DIY) centers. The solution gave the staff in the shops the possibility to use EDP as early as in 1983. The Internet did not exist at the time. EDP was not part of the daily work in the shop and was for most employees something unknown that took place at...

Possible Opioid Shopping and its Correlates.

Science.gov (United States)

Walker, Alexander M; Weatherby, Lisa B; Cepeda, M Soledad; Bradford, Daniel; Yuan, Yingli

2017-11-01

We created an operational definition of possible opioid shopping in US commercial health insurance data and examined its correlates. The population consisted of 264,204 treatment courses in persons with a fill for an opioid or diuretic prescription in 2012 and a second within 18 months. We examined counts of prescribers and pharmacies and the numbers of fills and overlaps for ability to discriminate courses of opioids from diuretics, which were a negative control. The most discriminatory measure, indicating possible shopping behavior, was cross-tabulated against other prescriptions filled and diagnoses as found in insurance claims. The associations between claims characteristics and shopping behavior were assessed in a logistic regression. A definition that classified possible "moderate" or "extensive" shopping when a person obtained drug through at least 3 practices and at least 3 pharmacies over 18 months was highly discriminatory between opioid and diuretic treatment. Overlaps between fills and number of fills did not improve the discrimination. Data from insurance claims strongly predicted moderate-to-extensive levels of possible shopping (c=0.82). Prominent among 20 significant predictors were: state of residence; amount of opioid dispensed; self-payment; use of nonspecialist prescribers; high use of anxiolytics, hypnotics, psychostimulants, and antipsychotics; and use of both immediate release and extended-release or long-acting opioids. The use of ≥3 prescribing practices and ≥3 dispensing pharmacies over 18 months sharply discriminated courses of opioid treatment from courses of diuretics. This pattern of fills was additionally associated with the numbers of nonspecialist and self-paid fills, the total morphine milligram equivalents dispensed, and heavier use of drugs for anxiety, sleep, attention, and psychosis.

Census tract correlates of vape shop locations in New Jersey.

Science.gov (United States)

Giovenco, Daniel P; Duncan, Dustin T; Coups, Elliot J; Lewis, M Jane; Delnevo, Cristine D

2016-07-01

Vape shops are opening across the USA, but little is known about the types of neighborhoods where they are located. This study explores community-level predictors of vape shop locations in New Jersey, USA. Vape shops were identified in July 2015 using a validated systematic online search protocol and geocoded using Google Earth Pro. Multivariable logistic regression identified demographic and other predictors of vape shop presence at the census tract level. Tobacco outlet density was consistently associated with higher odds of vape shop presence after adjusting for covariates (pretail were negatively associated with vapor outlets. Census tracts with a higher proportion of non-Hispanic black residents had significantly lower odds of having a vape shop (β=-0.03, pretail is high, but where fewer racial minorities live. The retail environment may communicate social norms regarding vaping and ultimately influence use behaviors of community residents. Copyright © 2016 Elsevier Ltd. All rights reserved.

Energy benchmarking for shopping centers in Gulf Coast region

International Nuclear Information System (INIS)

Juaidi, Adel; AlFaris, Fadi; Montoya, Francisco G.; Manzano-Agugliaro, Francisco

2016-01-01

Building sector consumes a significant amount of energy worldwide (up to 40% of the total global energy); moreover, by the year 2030 the consumption is expected to increase by 50%. One of the reasons is that the performance of buildings and its components degrade over the years. In recent years, energy benchmarking for government office buildings, large scale public buildings and large commercial buildings is one of the key energy saving projects for promoting the development of building energy efficiency and sustainable energy savings in Gulf Cooperation Council (GCC) countries. Benchmarking would increase the purchase of energy efficient equipment, reducing energy bills, CO_2 emissions and conventional air pollution. This paper focuses on energy benchmarking for shopping centers in Gulf Coast Region. In addition, this paper will analyze a sample of shopping centers data in Gulf Coast Region (Dubai, Ajman, Sharjah, Oman and Bahrain). It aims to develop a benchmark for these shopping centers by highlighting the status of energy consumption performance. This research will support the sustainability movement in Gulf area through classifying the shopping centers into: Poor, Usual and Best Practices in terms of energy efficiency. According to the benchmarking analysis in this paper, the shopping centers best energy management practices in the Gulf Coast Region are the buildings that consume less than 810 kW h/m"2/yr, whereas the poor building practices are the centers that consume greater than 1439 kW h/m"2/yr. The conclusions of this work can be used as a reference for shopping centres benchmarking with similar climate. - Highlights: •The energy consumption data of shopping centers in Gulf Coast Region were gathered. •A benchmarking of energy consumption for the public areas for the shopping centers in the Gulf Coast Region was developed. •The shopping centers have the usual practice in the region between 810 kW h/m"2/yr and 1439 kW h/m"2/yr.

A causal model to evaluate the influence of consumer's perceptions of online shopping on their shopping behavior

OpenAIRE

Asakawa, Masami; Okano, Masao

2009-01-01

This study examined the factors influencing consumers' perception of online shopping and developed a causal model that explains how this perception affects their online-shopping behavior. We administered a questionnaire survey to 297 college students. By utilizing the answers to 13 questions pertaining to consumer perceptions, we conducted a factor analysis that identified the following three factors: "convenience", "anxiety regarding security" and "poor navigation". On the basis of this resu...

Getting closer to people: family planning provision by drug shops in Uganda

Science.gov (United States)

Akol, Angela; Chin-Quee, Dawn; Wamala-Mucheri, Patricia; Namwebya, Jane Harriet; Mercer, Sarah Jilani; Stanback, John

2014-01-01

ABSTRACT Background: Private-sector drug shops are often the first point of health care in sub-Saharan Africa. Training and supporting drug shop and pharmacy staff to provide a wide range of contraceptive methods and information is a promising high-impact practice for which more information is needed to fully document implementation experience and impact. Methods: Between September 2010 and March 2011, we trained 139 drug shop operators (DSOs) in 4 districts of Uganda to safely administer intramuscular DMPA (depot medroxyprogesterone acetate) contraceptive injections. In 2012, we approached 54 of these DSOs and interviewed a convenience sample of 585 of their family planning clients to assess clients' contraceptive use and perspectives on the quality of care and satisfaction with services. Finally, we compared service statistics from April to June 2011 from drug shops, community health workers (CHWs), and government clinics in 3 districts to determine the drug shop market share of family planning services. Results: Most drug shop family planning clients interviewed were women with low socioeconomic status. The large majority (89%) were continuing family planning users. DMPA was the preferred contraceptive. Almost half of the drug shop clients had switched from other providers, primarily from government health clinics, mostly as a result of more convenient locations, shorter waiting times, and fewer stock-outs in drug shops. All clients reported that the DSOs treated them respectfully, and 93% trusted the drug shop operator to maintain privacy. Three-quarters felt that drug shops offered affordable family planning services. Most of the DMPA clients (74%) were very satisfied with receiving their method from the drug shop and 98% intended to get the next injection from the drug shop. Between April and June 2011, clinics, CHWs, and drug shops in 3 districts delivered equivalent proportions of couple-years of protection, with drug shops leading marginally at 36

Self-control predicts attentional bias assessed by online shopping-related Stroop in high online shopping addiction tendency college students.

Science.gov (United States)

Jiang, Zhaocai; Zhao, Xiuxin; Li, Cancan

2017-05-01

The aim of this study was to examine the relationships of personality types (i.e., self-control, BAS/BIS) and online shopping addiction (OSA) behavior and to investigate whether high-OSA tendency individuals display attentional biases toward online shopping-related (OS-related) stimuli as well as the links between attentional bias and personality types. The study included 98 college students divided into three groups (i.e., high-, medium- and low-OSA) according to their OSA behavior. The personality types (i.e., self-control, BAS/BIS) and OSA behavior were investigated by questionnaires. The attentional bias was evaluated by the OS-related Stroop and dot-probe task (DPT) paradigms. OSA was positively predicted by time spent on online shopping per day and average consumption for online shopping monthly, and negatively by self-control. High-OSA individuals displayed significant attentional biases toward OS-related stimuli in the Stroop, but not DPT paradigm. Moreover, the attentional bias toward OSA-related stimuli in high-OSA individuals was negatively correlated with self-control. These findings demonstrated the critical role of self-control in OSA behavior and attentional bias to OS-related stimuli in high-OSA individuals, indicating that more importance should be attached to self-control for the clinical intervention of online shopping addiction in future studies. Copyright © 2017 Elsevier Inc. All rights reserved.

Methods in Mapping Usability of Malaysia’s Shopping Centre

Directory of Open Access Journals (Sweden)

Abdul Ghani Aida Affina

2016-01-01

Full Text Available With more than 200 number of shopping centre in Klang Valley itself, we the consumer actually have vast of choices. Instead of the machineries varieties from the lower class product till the posh one, each of those shopping centres eventually offers the typical product same as others. Those shopping centers are competing with each other and in great endeavour to attract more consumers, to visit and spend. As for the visitor, the typical product and boring ambience seems similar in all malls, and is looking something beyond the standard. Something that promising quality embedded in shopping centre which evokes the various emotions of the user along their journey in malls. This quality is known as usability. Usability; as defined generally is a global user’s experience response with product, environment, service or facilities. It is an assessment in extracting the qualities of shopping centre design. In mapping it, there are a few synthesizing methods to implement it. Therefore, this paper purposely to review the method that been used in usability of Malaysia’s shopping centre research with a few references on previous research done in usability assessment by predecessor’s scholars. With the accentuation on three elements that anchoring what the usability is: effectiveness, efficient and satisfaction, it is hope that this overview can lead other researcher in portraying its relationship with the quality and ‘user friendly’ design of shopping centre.

INVESTIGATING THE COLLECTIVE ONLINE purchase PHENOMENON: FACTORS AFFECTING THE SHOPPING INTENSITY

Directory of Open Access Journals (Sweden)

Everton Roberto Comin

2014-04-01

Full Text Available The collective online shopping is a recent phenomenon in Brazil whose objective is to sell products and services for a minimum number of consumers. This study aims to investigate whether the intensity of collective online shopping is influenced by the aspects consumer interest in online collective shopping, impulse buying and insecurity. The data collection was based on a questionnaire with closed questions with multiple choices and a 5-point Likert scale.The final sample is composed of 143 respondents. Data was analyzed through the following statistic techniques: exploratory data analysis, exploratory factor analysis, reliability analysis, and logistic regression. The results suggest that people more interest in collective shopping are more likely to make collective shopping. People who feel greater insecurity in navigating the website is less likely to make collective shopping. It was observed that there is no a positive relationship between impulse shopping and collective purchasing. Some limitations include the number of constructs and sample characteristics.

Baby boomers' food shopping habits. Relationships with demographics and personal values.

Science.gov (United States)

Worsley, Anthony; Wang, Wei C; Hunter, Wendy

2010-12-01

The purpose of this study was to examine baby boomers' food shopping behaviours and to investigate their relationships with demographics and personal values. A questionnaire concerning food shopping behaviours, personal values and demographics was mailed to a random sample of 2975 people aged 40-70 years in Victoria, Australia. Usable questionnaires of 1031 were obtained. Structural equation modelling was employed for data analyses. The analyses revealed that demographics and personal values influenced shopping behaviours via different pathways among male and female baby boomers. For example, self-direction positively impacted on shopping planning for men but negatively influenced price minimization for women. Among women only, age was positively related to shopping planning and negatively to price minimization. Thus, both personal values and demographics influenced baby boomers' shopping behaviours. Since values are more likely to be amenable to change than demographics, segmentation of the population via value orientations would facilitate targeted interventions to promote healthy food shopping. Copyright © 2010 Elsevier Ltd. All rights reserved.

The role of food shopping in later life.

Science.gov (United States)

Pettigrew, Simone; Worrall, Caitlin; Biagioni, Nicole; Talati, Zenobia; Jongenelis, Michelle

2017-04-01

By the time they reach retirement, individuals are typically highly experienced in sourcing food products and they have strong familiarity with food retailing environments. To investigate the ongoing role of food shopping in later life, the present study explored seniors' attitudes to food shopping and their food-selection behaviours through the lens of their broader lifestyles. The aim was to provide insights of relevance to the development of future efforts to optimise seniors' food shopping experiences and nutrition-related outcomes. Interviews were conducted with 75 Western Australians aged 60 + years to discuss food shopping in the context of their day-to-day lives. The sample was comprised mainly of women (n = 64) and the average age was 74 years. In general, food shopping was perceived to be a manageable but mundane part of life. The findings suggest that there has been an improvement in food retailing practices because many of the numerous areas of concern identified in previous research conducted in this geographical location a decade ago were not nominated as relevant by the interviewees. Instead, food-related issues reported to be most problematic included the difficulties associated with sourcing affordable food products that had been produced locally and that did not contain unacceptable food additives. Seniors' food shopping concerns thus appear to have changed from functional aspects of the physical store environment to product attributes that reflect the increasing industrialisation of the food industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

Meat Safety: An Evaluation of Portuguese Butcher Shops.

Science.gov (United States)

Santos, Ana; Cardoso, Margarida Fonseca; Costa, José M Correia da; Gomes-Neves, Eduarda

2017-07-01

Butcher shops are end points in the meat chain, and they can have a determinant role in cross-contamination control. This study aims to determine whether Portuguese butcher shops comply with European and Portuguese law regarding the sale of fresh meat and meat products. Butcher shops (n = 73) were assessed for meat handler and facility hygiene and for maintenance of the premises. Handlers (n = 88) were given a questionnaire composed of questions about knowledge and practice, including hazard analysis and critical control point (HACCP) and good practice in food industry, to assess their knowledge of and compliance with food safety practices. A checklist of 27 items was used to evaluate facility and meat handler hygiene and butcher shop maintenance. Our results revealed some lack of compliance in all the areas evaluated. The mean knowledge and practice score among the operators was 68.0%, and the mean "visual inspection" score for the butcher shops was 64.0%. Severe deficiencies were observed in the mandatory implementation of HACCP principles in this type of small food business. These findings indicate a need to modify training to enhance compliance with European food safety regulations at this step of the meat chain.

Flow shop scheduling with heterogeneous workers

OpenAIRE

Benavides, Alexander J.; Ritt, Marcus; Miralles Insa, Cristóbal Javier

2014-01-01

We propose an extension to the flow shop scheduling problem named Heterogeneous Flow Shop Scheduling Problem (Het-FSSP), where two simultaneous issues have to be resolved: finding the best worker assignment to the workstations, and solving the corresponding scheduling problem. This problem is motivated by Sheltered Work centers for Disabled, whose main objective is the labor integration of persons with disabilities, an important aim not only for these centers but for any company d...

SHOP: scaffold hopping by GRID-based similarity searches

DEFF Research Database (Denmark)

Bergmann, Rikke; Linusson, Anna; Zamora, Ismael

2007-01-01

A new GRID-based method for scaffold hopping (SHOP) is presented. In a fully automatic manner, scaffolds were identified in a database based on three types of 3D-descriptors. SHOP's ability to recover scaffolds was assessed and validated by searching a database spiked with fragments of known...... scaffolds were in the 31 top-ranked scaffolds. SHOP also identified new scaffolds with substantially different chemotypes from the queries. Docking analysis indicated that the new scaffolds would have similar binding modes to those of the respective query scaffolds observed in X-ray structures...

A Variable Interval Rescheduling Strategy for Dynamic Flexible Job Shop Scheduling Problem by Improved Genetic Algorithm

Directory of Open Access Journals (Sweden)

Lei Wang

2017-01-01

Full Text Available In real-world manufacturing systems, production scheduling systems are often implemented under random or dynamic events like machine failure, unexpected processing times, stochastic arrival of the urgent orders, cancellation of the orders, and so on. These dynamic events will lead the initial scheduling scheme to be nonoptimal and/or infeasible. Hence, appropriate dynamic rescheduling approaches are needed to overcome the dynamic events. In this paper, we propose a dynamic rescheduling method based on variable interval rescheduling strategy (VIRS to deal with the dynamic flexible job shop scheduling problem considering machine failure, urgent job arrival, and job damage as disruptions. On the other hand, an improved genetic algorithm (GA is proposed for minimizing makespan. In our improved GA, a mix of random initialization population by combining initialization machine and initialization operation with random initialization is designed for generating high-quality initial population. In addition, the elitist strategy (ES and improved population diversity strategy (IPDS are used to avoid falling into the local optimal solution. Experimental results for static and several dynamic events in the FJSP show that our method is feasible and effective.

Optimal experience in online shopping: the influence of flow

OpenAIRE

Sharkey, Ultan; Acton, Thomas; Conboy, Kieran

2012-01-01

peer-reviewed This research investigates the influences of product presentation modes, decision behaviour and the consumer experience on Internet shopping. The growth of online shopping brings with it cognitive challenges for consumers attempting to assess large numbers of options in purchase decisions. Further, there is little guidance for vendors in terms of presenting large numbers of product. In this study, online shopping is viewed as an information processing, decision ta...

Digitalization influence on shopping centers strategic management

Directory of Open Access Journals (Sweden)

Ioniţă Irene Mihaela

2017-07-01

Full Text Available Shopping centers are an important aspect of the extremely dynamic life of the 21st century consumer. Nowadays, worldwide, shopping centers represent significant multimillion euro investments, remarking themselves with bold architectures and structures and an individual brand image. Retail markets are currently under transformation by a confluence of new retailing technologies, dramatic shifts in the demographic profile and preferences of more affluent and educated shoppers. Part of the market share in modern retail moved to new forms of selling, which weakened the offer of some traditional retailers, while also creating opportunities for retailers to move and integrate their offerings with new digital tools (via electronic commerce, social commerce and mobile commerce. Meeting customer needs and increasing sales are the primary drivers behind retailers use of information systems and technology (IS/IT. New developments in IS/IT offer new opportunities and challenges for organizations and society. The current paper proposes to analyze the way digital media and information technology (computers and mobile devices influences the virtual and physical shopping experiences, and shopping centers management consequently. The need for communication & sales channels integration, the impact of new information technologies (IT’s, the growing role of social / digital media, the balance between personalization and privacy – all represent challenges retail industry needs to currently adapt to face digitalization. E-commerce is transforming both consumer behavior and retailing business models, by greatly expanding shopping convenience, selection and affordability.

New Digital Marketing Actors: Private Shopping Clubs and Their Advertising Practices

Directory of Open Access Journals (Sweden)

Nazlım Tüzel Uraltaş

2014-12-01

In the first part of the study the concept of digital marketing and its historical background will be explained. In the second part online shopping behavior, online shopping training activities in Turkey and private shopping clubs will be examined.  The last part of the study will deal with the advertising practices of private shopping clubs. The study is essentially a literature review; thus, the resources are mostly secondary in nature.

LinkShop v.1.0.0

Energy Technology Data Exchange (ETDEWEB)

2017-05-15

LinkShop is a software tool for applying the method of Linkography to the analysis time-sequence data. LinkShop provides command line, web, and application programming interfaces (API) for input and processing of time-sequence data, abstraction models, and ontologies. The software creates graph representations of the abstraction model, ontology, and derived linkograph. Finally, the tool allows the user to perform statistical measurements of the linkograph and refine the ontology through direct manipulation of the linkograph.

A cross-cultural comparison of expatriates’ shopping behavior

NARCIS (Netherlands)

Wijnen, G.J.; Kemperman, A.D.A.M.; Janssen, I.I.

2012-01-01

Explored is how shopping centre attributes can be adapted to culture-related shopping behaviour of expatriates. While awareness of consumer ethnicity and effectiveness of culture-based market segmentation are on-going and relevant topics in retailing, there is only limited information available on

Evaluation of Fresh Food Internet Shopping in Korean Beef

OpenAIRE

金, 鍾和; 森高, 正博; 福田, 晋; Kim, Jong-hwa; Moritaka, Masahiro; Fukuda, Susumu

2013-01-01

This paper focuses on consumer reactions to the fresh food internet shopping on Korea beef. In the paper, we have analyzed an effective relation in consumer's perceived qualities, the evaluation of commodities and the evaluation of fresh food internet shopping. As a result, two effective relations were found. Firstly, consumer's perceived qualities affect the evaluation of commodities. Secondly, the evaluation of commodities affects t-he evaluation of fresh food internet shopping. This result...

Attitudinal Explanation on Virtual Shopping Intention

Directory of Open Access Journals (Sweden)

Ritzky Karina M.R. Brahmana

2014-08-01

Full Text Available Abstract. Virtual stores provide great efficiency in the retail value chain, and their existence has tremendously paved the way for electronic commerce. Understanding the intention of consumers to shop online in attitudinal perspective will provide important contribution to the area of e-commerce. This research proposes Task Technology Fit, Perceived Ease of Use (PEoU, and Perceived Usefulness (PU as the factors that drive consumers’ intention. The results from our survey study of 310 online consumers in Indonesia indicate that TTF affects PEoU and PU significantly. Our hierarchical model also reports that PEoU is the mediating effect on the relationship between TTF and Intention. The resulting model explains a large portion of the factors that lead a user’s behavioural intention to use a virtual shop. Keywords : Attitudinal, Task Technology Fit, Perceived Ease of Use, Perceived Usefulness, Retail, Virtual Shopping Intention

Opioid shopping behavior: how often, how soon, which drugs, and what payment method.

Science.gov (United States)

Cepeda, M Soledad; Fife, Daniel; Chow, Wing; Mastrogiovanni, Gregory; Henderson, Scott C

2013-01-01

Doctor shopping (obtaining opioid prescriptions from multiple prescribers) is one example of opioid abuse and diversion. The authors assessed how soon shopping behavior was observed after opioid exposure, number of events per shopper, preferred opioids, and method of payment. This was a cohort study. Individuals with ≤1 dispensing for any opioid in 2008 were followed for 18 months. Shopping behavior was defined as ≤2 prescriptions by different prescribers with ≤1 day of overlap and filled at ≤3 pharmacies. Of 25,161,024 subjects, 0.30% exhibited shopping behavior. Opioid-experienced subjects were 13.7 times more likely to exhibit shopping behavior and had more shopping episodes than opioid-naive subjects. Time to first shopping event was 246.90 ± 163.61 days. Number of episodes was 2.74 ± 4.66. Most subjects with shopping behavior (55.27%) had 1 shopping episode, whereas 9.52% had ≤6 episodes; 88.99% had ≤4 prescribers. Subjects with shopping behavior filled schedule II opioids more often than subjects without shopping behavior (19.51% vs 10.89%) and more often paid in cash (44.85% vs 18.54%). Three of 1000 people exposed to opioids exhibit shopping behavior, on average, 8 months after exposure. Opioid shoppers seek strong opioids, avoid combination products, often pay cash, and obtain prescriptions from few prescribers. © 2012 The Author(s).

Investigation into the accuracy of a proposed laser diode based multilateration machine tool calibration system

International Nuclear Information System (INIS)

Fletcher, S; Longstaff, A P; Myers, A

2005-01-01

Geometric and thermal calibration of CNC machine tools is required in modern machine shops with volumetric accuracy assessment becoming the standard machine tool qualification in many industries. Laser interferometry is a popular method of measuring the errors but this, and other alternatives, tend to be expensive, time consuming or both. This paper investigates the feasibility of using a laser diode based system that capitalises on the low cost nature of the diode to provide multiple laser sources for fast error measurement using multilateration. Laser diode module technology enables improved wavelength stability and spectral linewidth which are important factors for laser interferometry. With more than three laser sources, the set-up process can be greatly simplified while providing flexibility in the location of the laser sources improving the accuracy of the system

Implementing the Affordable Care Act: State Action to Establish SHOP Marketplaces.

Science.gov (United States)

Dash, Sarah J; Lucia, Kevin W; Thomas, Amy

2014-03-01

The Affordable Care Act seeks to help small employers offer coverage by reforming the small-group market and establishing Small Business Health Options Program (SHOP) marketplaces. Seventeen states and the District of Columbia chose to operate their own SHOP marketplaces in 2014, with the federal government operating the SHOP marketplace in 33 states. This brief examines state decisions to enhance the value of SHOP marketplaces for small employers and finds that most have set predictable participation and eligibility requirements and will offer a competitive choice of insurers and plans. States also are seeking to facilitate small employers' shopping experience through online tools and access to personalized assistance. While not all SHOP marketplaces are yet functioning as intended, their establishment offers an opportunity to identify successful strategies for improving the affordability and accessibility of coverage for small employers.

Ant colony optimisation for scheduling of flexible job shop with multi-resources requirements

Directory of Open Access Journals (Sweden)

Kalinowski Krzysztof

2017-01-01

Full Text Available The paper presents application of ant colony optimisation algorithm for scheduling multi-resources operations in flexible job shop type of production systems. Operations that require the participation of two or more resources are common in industrial practice, when planning are subject not only machines, but also other additional resources (personnel, tools, etc.. Resource requirements of operation are indicated indirectly by resource groups. The most important parameters of the resource model and resource groups are also described. A basic assumptions for ant colony algorithm used for scheduling in the considered model with multiresources requirements of operations is discussed. The main result of the research is the schema of metaheuristic that enables searching best-score solutions in manufacturing systems satisfying presented constraints.

Workload control in job shops, grasping the tap

NARCIS (Netherlands)

Land, Martin Jaap

2004-01-01

The term job shops is used to indicate companies that produce customer-specific components in small batches. Jobs (production orders) in a job shop are characterised by a large variety of routings and operation processing times. This variety, combined with irregular order arrivals, generally leads

E-Commerce Performance. Shopping Cart Key Performance Indicators

Directory of Open Access Journals (Sweden)

Mihaela I. MUNTEAN

2016-01-01

Full Text Available In an e-commerce performance framework is important to identify the key performance indicators that measure success and together provide the greatest context into the business perfor-mance. Shopping carts are an essential part of ecommerce, a minimal set of key performance indicators being the subject of our debate. The theoretical approach is sustained by a case study, an e-shop implemented using PHP and MySQL, for simulating main business processes within the considered performance framework. Our approach opens a perspective for future research using additional indicators in order to properly evaluate the global performance of any e-shop.

Consumer behavior towards Online shopping of electronics in pakistan

OpenAIRE

BASHIR, ADIL

2013-01-01

E-commerce has made life simple and innovative of individuals and groups; consumer Behavior in online shopping is different from the physical market where he has access to see the product. The purpose of the research was to study the consumer behavior in online shopping of electronics especially in Pakistan. The main research question in thesis is how consumers behave while shopping online. Primary data was collected through the questionnaire survey and by emails from personal contacts in...

Influence of visualization on consumption during on-line shopping

OpenAIRE

Hictaler, Urška

2013-01-01

This diploma work studies the influence of visualization on consumption during on-line shopping. The first part of the thesis starts with key areas of visualization, consumption and on-line shopping. Visualization, areas of use, human perception and ways of product presentation in on-line shops are defined discussed first. Next, consumption, consumers and factors that influence their decisions and satisfaction are defined. The last topic in the first part of the thesis discusses on-line shopp...

Shopping intention prediction using decision trees

OpenAIRE

Šebalj, Dario; Franjković, Jelena; Hodak, Kristina

2017-01-01

Introduction: The price is considered to be neglected marketing mix element due to the complexity of price management and sensitivity of customers on price changes. It pulls the fastest customer reactions to that change. Accordingly, the process of making shopping decisions can be very challenging for customer.Objective: The aim of this paper is to create a model that is able to predict shopping intention and classify respondents into one of the two categories, depending on whether they inten...

Constraint-based job shop scheduling with ILOG SCHEDULER

NARCIS (Netherlands)

Nuijten, W.P.M.; Le Pape, C.

1998-01-01

We introduce constraint-based scheduling and discuss its main principles. An approximation algorithm based on tree search is developed for the job shop scheduling problem using ILOG SCHEDULER. A new way of calculating lower bounds on the makespan of the job shop scheduling problem is presented and

A Flexible Job Shop Scheduling Problem with Controllable Processing Times to Optimize Total Cost of Delay and Processing

Directory of Open Access Journals (Sweden)

Hadi Mokhtari

2015-11-01

Full Text Available In this paper, the flexible job shop scheduling problem with machine flexibility and controllable process times is studied. The main idea is that the processing times of operations may be controlled by consumptions of additional resources. The purpose of this paper to find the best trade-off between processing cost and delay cost in order to minimize the total costs. The proposed model, flexible job shop scheduling with controllable processing times (FJCPT, is formulated as an integer non-linear programming (INLP model and then it is converted into an integer linear programming (ILP model. Due to NP-hardness of FJCPT, conventional analytic optimization methods are not efficient. Hence, in order to solve the problem, a Scatter Search (SS, as an efficient metaheuristic method, is developed. To show the effectiveness of the proposed method, numerical experiments are conducted. The efficiency of the proposed algorithm is compared with that of a genetic algorithm (GA available in the literature for solving FJSP problem. The results showed that the proposed SS provide better solutions than the existing GA.

Price learning during grocery shopping

DEFF Research Database (Denmark)

Jensen, Birger Boutrup

Many attempts have been made to measure consumers' price knowledge for groceries. However, the results have varied considerably and conflict with results of reference price research. This is the first study to examine price knowledge before, during, and after store visit, thus enabling a study...... of what consumers learn about prices during grocery shopping. Three measures of price knowledge corresponding to different levels of price information processing were applied. Results indicate that price learning does take place and that episodic price knowledge after store exit is far more widespread...... than expected. Consequently, a new view of how consumer price knowledge evolves during grocery shopping is presented....

When Is a New Scale not a New Scale? The Case of the Bergen Shopping Addiction Scale and the Compulsive Online Shopping Scale.

Science.gov (United States)

Griffiths, Mark D; Andreassen, Cecilie S; Pallesen, Ståle; Bilder, Robert M; Torsheim, Torbjørn; Aboujaoude, Elias

2016-01-01

Manchiraju et al. ( International Journal of Mental Health and Addiction , 1-15, 2016) published the Compulsive Online Shopping Scale (COSS) in the International Journal of Mental Health and Addiction ( IJMHA ). To develop their measure of compulsive online shopping, Manchiraju and colleagues adapted items from the seven-item Bergen Shopping Addiction Scale (BSAS) and its' original 28-item item pool. Manchiraju et al. did not add or remove any of the original seven items, and did not substantially change the content of any of the 28 items on which the BSAS was based. They simply added the word "online" to each existing item. Given that the BSAS was specifically developed to take into account the different ways in which people now shop and to include both online and offline shopping, there does not seem to be a good rationale for developing an online version of the BSAS. It is argued that the COSS is not really an adaptation of the BSAS but an almost identical instrument based on the original 28-item pool.

Chinese and Finnish Undergraduates’ Online Shopping Behaviour

OpenAIRE

Wan, Ning

2015-01-01

The main goal of the thesis was to recognise similar and different characteristics of online shopping behaviour between Chinese and Finnish undergraduates. Additionally, this thesis would give meaningful proposals for merchants and managers on offering better online marketing. This thesis report was conducted in both theoretical and practical parts. The theoretical parts include marketing research and online shopping consumption behaviour. The study describes the marketing research progre...

Improving Interaction between NGO's, Science Shops and Universities

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard

2005-01-01

An overview of the results from the INTERACTS research project: Improving Interaction between NGOs, Universities and Science Shops: Experiences and Expectations, running 2002-2004......An overview of the results from the INTERACTS research project: Improving Interaction between NGOs, Universities and Science Shops: Experiences and Expectations, running 2002-2004...

E-shopping in the Netherlands: does geography matter?

NARCIS (Netherlands)

Farag, Sendy; Weltevreden, J.W.J.; Rietbergen, T. van; Dijst, M.J.; Oort, F.G. van

2006-01-01

Why consumers shop via the Internet, is a frequently asked question. As yet, the impact of spatial variables on e-shopping has received little attention. In this paper we report our investigation of the spatial distribution of Internet users and online buyers in the Netherlands for the time period

Informal sector shops and AIDS prevention An exploratory social ...

African Journals Online (AJOL)

Informal sector shops and AIDS prevention An exploratory social marketing ... The existence of a variety of media and interpersonal information sources on the ... shops should be further investigated as avenues for AIDS prevention efforts.

Identify the Important Decision Factors of Online Shopping Adoption in Indonesia

Directory of Open Access Journals (Sweden)

Lailatul HIJRAH

2017-12-01

Full Text Available The objective of this study is to identify factors encouraging a consumer to engage in online shopping activities. The expected contribution of this study is for online entrepreneurs, in order to develop the most suitable business strategy, so that it will be clearly identified and sorted out which factors are the most important and the main motivation of Indonesian consumers to shop via online by using responses from respondents who usually shop online and offline in 3 cities in Indonesia, Jakarta, Surabaya and Samarinda. The research instruments were developed by conducting FGDs on relevant groups, either academics, online shopping activists, suppliers and courier businessmen in Jakarta, Surabaya and Samarinda Cities in effort to extract any information that encourages consumers to online shopping. After conducting FGD, the researcher produced 48 items proposed for factor analysis and after extracted to form eleven constructs, some items were removed because they had less loading factors. The eleven constructs or dimensions are trust, risk, consumer factors, website factors, price, service quality, convenience, subjective norm, product guarantee, variety of products and lifestyle. The implications of this study provide valuable insights about consumer decisions to online shopping or not online shopping.

Consumer's Online Shopping Influence Factors and Decision-Making Model

Science.gov (United States)

Yan, Xiangbin; Dai, Shiliang

Previous research on online consumer behavior has mostly been confined to the perceived risk which is used to explain those barriers for purchasing online. However, perceived benefit is another important factor which influences consumers’ decision when shopping online. As a result, an integrated consumer online shopping decision-making model is developed which contains three elements—Consumer, Product, and Web Site. This model proposed relative factors which influence the consumers’ intention during the online shopping progress, and divided them into two different dimensions—mentally level and material level. We tested those factors with surveys, from both online volunteers and offline paper surveys with more than 200 samples. With the help of SEM, the experimental results show that the proposed model and method can be used to analyze consumer’s online shopping decision-making process effectively.

Planning continuity and the actual conditions of shopping malls.

Science.gov (United States)

Morita, Yoshitsugu; Tahara, Manabu

2004-11-01

The main purpose of this study is to investigate the continuity of the planning of shopping malls in downtown areas of Japan and to look into the tendencies of the current existing malls until today. This paper is a summary of a survey conducted on the actual conditions of current shopping malls and a questionnaire administered to local governments in the survey areas. The results of this study allow us to summarize the reasons for and changes caused by renewal efforts directed toward the streets, public spaces, and urban elements (pavement, bench, streetlight, arcade, sculpture, etc.) in shopping malls. Furthermore, these results also help us to understand the scale of the renewal efforts as well as their timing in relation to when the shopping mall was originally constructed.

PrestaShop 1.5 beginner's guide

CERN Document Server

Caro, Jose Antonio Tizon

2013-01-01

This book is written in a friendly voice with lots of tips, tricks, and screenshots to help you set up, extend, and personalize your own online shop. If you want to start your own e-commerce business, then this book will help you do that.This book is for people who are interested in creating an online shop. Basic HTML and CSS skills would be beneficial but are not required as we will provide you with all the code and know-how you need.

Nicola Cafés capsules compatible with Nespresso machines : risky marketing decision

OpenAIRE

Dotti, João Baptista Geraldes Barba

2015-01-01

The demanding and traditional coffee market in Portugal is changing in some of its main components. Consumers, limited financially by the economic crisis, and taking advantage of the growth of coffee machines with capsules, drink more coffee at home, reducing consumption in establishments such as bars, restaurants and pastry shops. The Nutricafés S.A. is the third player of the coffee market in Portugal, and through its main brand, Nicola Cafés will have to choose between two marketing strate...

Drivers and Barriers to Online Shopping in a Newly Digitalized Society

Directory of Open Access Journals (Sweden)

M. Shakaib Akram

2018-02-01

Full Text Available Despite the massive penetration of internet in the developed and the developing world, e-commerce is still struggling in most of the developing and emerging economies. In this context, this study investigates why the customers, in developing countries, do not prefer online shopping for apparel despite the several benefits such as convenience, control, variety and enjoyment being offered by this mode of shopping. Moreover, the study assesses the boundary conditions under which consumers’ perceived risk diminishes online shopping benefits. With data from prospective online customers in an emerging economy, the proposed concept is tested using SmartPLS 3.0 based SEM approach. The results indicate a significant positive effect of online shopping benefits on consumers’ purchase intention for online shopping. In addition, the relationship between online shopping benefits and purchase intention is contingent on the consumers’ level of perceived risk in the digital environment. The paper concludes with a discussion on the managerial and the theoretical implications.

Machine Shop Facilities

Data.gov (United States)

Federal Laboratory Consortium — Projects at IARC can benefit from Fermilab's experienced machinists, welders, and extensive on-site equipment. Equipment includes conventional and CNC mills, lathes,...

Uma propriedade estrutural do problema de programação da produção flow shop permutacional com tempos de setup

Directory of Open Access Journals (Sweden)

João Vitor Moccellin

2007-01-01

Full Text Available Neste artigo apresenta-se uma propriedade estrutural do problema de programação da produção flow shop permutacional com tempos de setup das máquinas separados dos tempos de processamento das tarefas, a qual foi identificada a partir de investigações que foram realizadas sobre as características do problema. Tal propriedade fornece um limitante superior do tempo de máquina parada entre a sua preparação e o início de execução das tarefas. Utilizando a propriedade, o problema original de programação da produção com minimização do makespan pode ser resolvido de maneira heurística por meio de uma analogia com o problema assimétrico do caixeiro-viajante.This paper deals with the permutation flow shop scheduling problem with separated machine setup times. As a result of an investigation on the problem characteristics a structural property is introduced. Such a property provides an upper bound on the idle time of the machines between the setup task and the job processing. As an application of this property, the original scheduling problem with the makespan criterion can be heuristically solved by an analogy with the asymmetric traveling salesman problem.

Pengaruh Hedonic Shopping Motivation Terhadap Impulse Buying Pada Toko Online: Studi Pada Toko Online Zalora

OpenAIRE

Pasaribu, Lia Octaria; Dewi, Citra Kusuma

2015-01-01

Online shopping, including shopping for fashion goods, has become a trend in Indonesia. One of buyer's motivations to do online-fashion-shopping is hedonic shopping motivation. This research aims to examine the influence of hedonic shopping motivation on impulse buying process. Using 100 buyers of Zalora (an online shop) as the respondents, this study confirms that hedonic shopping motivation has a significant influence on the impulse buying process.

Farmers' market shopping and dietary behaviours among Supplemental Nutrition Assistance Program participants.

Science.gov (United States)

Jilcott Pitts, Stephanie B; Wu, Qiang; Demarest, Chelsea L; Dixon, Crystal E; Dortche, Ciarra Jm; Bullock, Sally L; McGuirt, Jared; Ward, Rachel; Ammerman, Alice S

2015-09-01

Because farmers' markets include a variety of fruits and vegetables, shopping at farmers' markets would likely improve diet quality among low-income consumers, as well as promote sustainable direct farm-to-consumer business models. However, not much is known about how to promote farmers' market shopping among low-income consumers. Therefore, the purpose of the present paper was to examine barriers to and facilitators of shopping at farmers' markets and associations between shopping at farmers' markets and self-reported dietary behaviours (fruit and vegetable, sugar-sweetened beverage and fast-food consumption) and BMI. Cross-sectional analyses of associations between farmers' market shopping frequency, awareness of markets, access to markets, dietary behaviours and BMI. Department of Social Services, Pitt County, eastern North Carolina, USA. Between April and July 2013, Supplemental Nutrition Assistance Program (SNAP) participants (n 205) completed a quantitative survey. Barriers to shopping at farmers' markets included does not accept SNAP/electronic benefit transfer, out of the way and lack of transportation. Farmers' market shopping was associated with awareness of farmers' markets (estimate =0·18 (se 0·04), Pmarket shopping (estimate =1·06 (se 0·32), P=0·001). Our study is one of the first to examine SNAP participants' farmers' market shopping, distance to farmers' markets and dietary behaviours. Barriers to shopping at farmers' markets and increasing awareness of existing markets should be addressed in future interventions to increase SNAP participants' use of farmers' markets, ultimately improving diet quality in this high-risk group.

IS ONLINE GROCERY SHOPPING INCREASING IN STRENGTH?

OpenAIRE

Corbett, James J.

2001-01-01

Online grocery shopping is a relatively new innovation with regard to the way in which one purchases groceries. Some interesting concepts- designed to enhance the process of making grocery products available for consumption of the ever-changing consumer- have entered the food distribution industry channels. A telephone survey was conducted in the Boston trading area to determine the profile of online grocery consumers who are familiar with online grocery shopping.

Future Shop: A Model Career Placement & Transition Laboratory.

Science.gov (United States)

Floyd, Deborah L.; And Others

During 1988-89, the Collin County Community College District (CCCCD) conducted a project to develop, implement, and evaluate a model career laboratory called a "Future Shop." The laboratory was designed to let users explore diverse career options, job placement opportunities, and transfer resources. The Future Shop lab had three major components:…

CERN Shop Christmas Sale

CERN Multimedia

Visits & Exhibition Service/ETT-VE

2001-01-01

11-13.12.2001 Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 11 to Thursday 13 December from 10.30 to 16.00. CERN Calendar 10.- CERN Sweat-shirts(M, L, XL) 30.- CERN T-shirt (M, L, XL) 20.- New CERN silk tie (2 colours) 35.- Fancy silk tie (blue, bordeau) 25.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- CERN watch 25.- CERN baseball cap 15.- CERN briefcase 15.- Book 'Antimatter' (English) 35.- Book 'How the web was born' (English) 25.- The Search for Infinity (French, Italian, English, German) 40.-   If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs.

Shopping versus Nature? An Exploratory Study of Everyday Experiences.

Science.gov (United States)

Craig, Tony P; Fischer, Anke; Lorenzo-Arribas, Altea

2018-01-01

Although a growing volume of empirical research shows that being in nature is important for human wellbeing, the definition of what constitutes an 'experience in nature,' and how this is different from other types of experiences, is very often left implied. In this paper we contrast everyday experiences involving nature with a category of everyday experience in which most people regularly partake. We present an exploratory study in which people ( N = 357) were explicitly asked to describe a memory they had of an everyday 'experience which involved nature,' as well as an everyday 'experience which involved shopping.' The open-ended responses to these questions were analyzed both quantitatively and qualitatively. Nature experiences were generally found to be more positive than shopping experiences, and they were more likely to be rated as 'peaceful' and 'active' compared to shopping experiences. Follow-up analyses indicate a significant interaction between experience category (nature or shopping), and the relationship between connectedness to nature and the amount of pleasure associated with that experience: The more strongly connected to nature a respondent was, the larger the disparity between the pleasantness of the shopping experience and that of the experience in nature tended to be.

East Europe Report, Political, Sociological and Military Affairs

Science.gov (United States)

1984-10-18

for manslaughter and East Berliners with a record for scuffles and in the porno trade. Official sources in the FRG have not yet indicated whether...amusement games, like pinball machines, video games, .calculations, and "other similar devices running on electricity," can no longer be put to

Ranking Parameters on Quality of Online Shopping Websites Using Multi-Criteria Method

OpenAIRE

Mehrbakhsh Nilashi; Karamollah Bagherifard; Othman Ibrahim; Nasim Janahmadi; Leila Ebrahimi

2012-01-01

The growing use of Internet in Malaysia provides a developing prospect of online shopping for international students. Also, international students are an outstanding group in online shopping in Malaysia. In view of this, in order to improve increase online shopping among international students and Malaysian online shopping, a research framework was proposed and a survey of international student was done. Proposed research framework considers three key dimensions service quality, information q...

How Can Stores Sustain Their Businesses? From Shopping Behaviors and Motivations to Environment Preferences

Directory of Open Access Journals (Sweden)

Rachel J.C. Chen

2013-02-01

Full Text Available The purpose of this study was to (1 discover consumer purchasing behaviors while shopping as a tourist and shopping at home, and (2 investigate tourist shopping preferences for an ideal shopping environment. A sample of 1,235 respondents participated in this study. Survey participants were asked to evaluate what store attributes they desired and what sources of information they used while selecting a store to shop in during their trips. Results indicate that consumers utilized various shopping channels while shopping in various environments. Also, different types of consumers exhibited clear preferences toward their ideal shopping environment. The results of this study are helpful for future service providers, tourism businesses, and tourism retailers to plan product development, provide better services, and equip a wider range of service skills.

CONCEPTUAL MODEL OF CONSUMERS TRUST TO ONLINE SHOPS

Directory of Open Access Journals (Sweden)

T. Dubovyk

2014-06-01

Full Text Available In the article the conceptual model of the major factors that influence consumers trust in online shop: reliability of online store, reliable information system for making purchases online, factors of ethic interactiveness (security, third-party certification, internet-marketing communications of online-shop and other factors – that is divided enterprises of trade and consumers (demographic variables, psychological perception of internet-marketing communications, experience of purchase of commodities are in the Internet. The degree of individual customer trust propensity which reflects the personality traits, culture and previous experience. An implement signs of consumer confidence due to site elements online shop – graphic design, structured design, design of content, design harmonized with perception of target audience.

US Household Food Shopping Patterns: Dynamic Shifts Since 2000 And Socioeconomic Predictors.

Science.gov (United States)

Stern, Dalia; Robinson, Whitney R; Ng, Shu Wen; Gordon-Larsen, Penny; Popkin, Barry M

2015-11-01

Under the assumption that differential food access might underlie nutritional disparities, programs and policies have focused on the need to build supermarkets in underserved areas, in an effort to improve dietary quality. However, there is limited evidence about which types of stores are used by households of different income levels and differing races/ethnicities. We used cross-sectional cluster analysis to derive shopping patterns from US households' volume food purchases by store from 2000 to 2012. Multinomial logistic regression identified household socioeconomic characteristics that were associated with shopping patterns in 2012. We found three food shopping patterns or clusters: households that primarily shopped at grocery stores, households that primarily shopped at mass merchandisers, and a combination cluster in which households split their purchases among multiple store types. In 2012 we found no income or race/ethnicity differences for the cluster of households that primarily shopped at grocery stores. However, low-income non-Hispanic blacks (versus non-Hispanic whites) had a significantly lower probability of belonging to the mass merchandise cluster. These varied shopping patterns must be considered in future policy initiatives. Furthermore, it is important to continue studying the complex rationales for people's food shopping patterns. Project HOPE—The People-to-People Health Foundation, Inc.

Relative performance of priority rules for hybrid flow shop scheduling with setup times

Directory of Open Access Journals (Sweden)

Helio Yochihiro Fuchigami

2015-12-01

Full Text Available This paper focuses the hybrid flow shop scheduling problem with explicit and sequence-independent setup times. This production environment is a multistage system with unidirectional flow of jobs, wherein each stage may contain multiple machines available for processing. The optimized measure was the total time to complete the schedule (makespan. The aim was to propose new priority rules to support the schedule and to evaluate their relative performance at the production system considered by the percentage of success, relative deviation, standard deviation of relative deviation, and average CPU time. Computational experiments have indicated that the rules using ascending order of the sum of processing and setup times of the first stage (SPT1 and SPT1_ERD performed better, reaching together more than 56% of success.

Penerapan Algoritma Genetika Untuk Masalah Penjadwalan Job Shop Pada Lingkungan Industri Pakaian

OpenAIRE

Sitanggang, Hendrik

2011-01-01

Pada industri pakaian khususnya yang proses produksinya berbaur dan multi produk sering mengalami kesulitan pada penjadwalan job shop. Oleh karena itu, perlu diadakan penelitian untuk penjadwalan job shop yang efektif terutama yang proses produksinya berbaur dan multi produk. Pada tulisan ini akan diajukan metode untuk penjadwalan job shop yang berbaur dan multi produk dengan tujuan meminimalkan total pinalti E/T (Earliness/Tardiness) dengan menentukan start pada masing-masing job shop dan ba...

The planned Shopping Center as a generator of a new develpmente city district: the example of Catuaí Shopping Center in Londrina O Shopping Center planejado, como gerador de um novo (sub centro de desenvolvimento: o exemplo do Catuaí Shopping Center de Londrina

Directory of Open Access Journals (Sweden)

Maria Luiza Fava Grassiotto

2007-11-01

Full Text Available Dejan Sudjic (1999 considers shopping centers, modern airports and museums, as important reference marks of new urban landscape, “public” spaces, keys to contemporary cities definition. They are mega complexes that generate economic competition between cities, establishing their influence areas. Enterprises which concentrate populations, arise cultural interests that, independently of scale and without causing excessive development in cities, afford them structure, form and identity. This paper briefly characterizes the multifunctionality and the existing shopping center typologies, concentrating afterwards on the history of Catuaí Shopping Center and the dynamics of its evolutionary process. Matters such as the expansion of the surrounding and real property valorization, its power to attract investments and new activities, besides its performance as land use modifier, are mentioned. Finally, it is highlighted the role of the shopping center as an instrument of neighborhood progress, social transformation, and changing of behavior enabling, during its evolutionary process, the development of a characteristic city district and a new centrality.Dejan Sudjic (1999 considera os shopping centers, ao lado dos modernos aeroportos e museus, como importantes marcos de referência da nova paisagem urbana, espaços “públicos” chaves na definição da cidade contemporânea. São megacomplexos que geram competição econômica entre as cidades, estabelecendo suas áreas de influência. Empreendimentos concentradores de população, despertam interesses culturais, que independentemente da escala e sem causar o intenso crescimento das cidades, lhes dão estrutura, forma e identidade. Este texto, após uma breve caracterização da multifuncionalidade e das tipologias de shopping centers existentes, concentra-se na história do Catuaí Shopping Center de Londrina, e a dinâmica de seu processo evolutivo. Questões como: a expansão e valoriza

Classification of Inheritance Shop Houses in George Town, Penang - UNESCO World Heritage Site

Directory of Open Access Journals (Sweden)

Rozliani Mansor

2012-09-01

Full Text Available Shop house is an urban terrace house attribute of Asian towns from the 18 th century which usually integrates a shop or business premise on the ground floor whilst the family dwells on the upper level, providing both ease and safety. The shop house might also be used entirely as dwelling quarters. Shop houses are constructed in rows and each row is arranged in blocks enclosed within a grid of main roads, back lanes and side roads. A shop house is usually two or three storeys high and is long and narrow, sharing a party wall with neighbours on either side. The Penang shop house is a ideal paradigm of a green building, using materials that are locally obtainable such as lime, clay stone and timber and suited to local geology and weather conditions. Shop houses also possessing architectural characteristics such as air vents and air-well that assist with natural ventilation and cooling. This paper will discuss categories and styles of the shop houses in historic city of George Town which can be divided into nine major groups.

Smart Shopping Carts: How Real-Time Feedback Influences Spending

NARCIS (Netherlands)

Ittersum, van K.; Wansink, B.; Pennings, J.M.E.; Sheehan, D.

2013-01-01

Although interest in smart shopping carts is increasing, both retailers and consumer groups have concerns about how real-time spending feedback will influence shopping behavior. Building on budgeting and spending theories, the authors conduct three lab and grocery store experiments that robustly

Smart shopping carts : How real-time feedback influences spending

NARCIS (Netherlands)

van Ittersum, Koert; Wansink, B.; Pennings, J.M.E.; Sheehan, D.

Although interest in smart shopping carts is increasing, both retailers and consumer groups have concerns about how real-time spending feedback will influence shopping behavior. Building on budgeting and spending theories, the authors conduct three lab and grocery store experiments that robustly

The architectural foundations for agent-based shop floor control

DEFF Research Database (Denmark)

Langer, Gilad; Bilberg, Arne

1998-01-01

simulation and cell controlenabling technologies. In order to continuethis research effortnew concepts and theories for shop floor control are investigated.This paper reviews the multi-agent concept aimed at investigatingits potential use in shop floor control systems. The paper willalso include a survey...

Smart shopping carts : How real-time feedback influences spending

NARCIS (Netherlands)

van Ittersum, Koert; Wansink, B.; Pennings, J.M.E.; Sheehan, D.

2013-01-01

Although interest in smart shopping carts is increasing, both retailers and consumer groups have concerns about how real-time spending feedback will influence shopping behavior. Building on budgeting and spending theories, the authors conduct three lab and grocery store experiments that robustly

E2023 ITEA SHOPS Collection of information on electricity. Part 2/2; E2023 ITEA SHOPS - Saehkoeenergiatiedon keruu. Osa 2/2

Energy Technology Data Exchange (ETDEWEB)

Savelius, A. [Enermet Oy, Jyskae (Finland)

2006-12-19

The Smart Home Payment Services (SHOPS) project aims at supporting those advanced functions for the payment of home utilities leading to innovative solutions and opening the door to a new generation of services. The main project innovation is a proposed open, cross-domain, platform-neutral system for describing services (e.g. Automatic Meter Reading) provided by devices and applications. The system description model elaborated by SHOPS combined existing standards and extend their reach. The technology developed will provide a high-level design base, reducing the cost and delay of new devices and applications creation. SHOPS architecture is based on advanced network and web technologies while careful attention is paid to data security and user privacy. (orig.)

Tenant mix structure in shopping centres: some empirical analyses from Poland

Directory of Open Access Journals (Sweden)

Bartłomiej Marona

2016-06-01

Full Text Available Objective: The objective of this paper is to find an ideal tenant mix structure for the current shopping centres in Upper Silesian Urban Area Region in Poland, taking under consideration consumer preferences and behaviour. Research Design & Methods: Apart from literature review, empirical research is based on a survey questionnaire. The Analytic Hierarchy Process was applied in the analysis of the data collected. Findings: The research confirmed that to a great extent the valid tenant mix structure in the surveyed shopping centres meets with friendly attitude of customers. However, there are areas where improvement can increase the visitors’ satisfaction. Moreover, it was proven that shopping remains the main reason for customers’ visits in shopping centres, in spite of extending the offer of this type of places with new functions. Implications & Recommendations: Real estate managers are recommended to take actions aiming at increasing competitiveness on the market via the extension of the proposed shopping offer and their adjustment to customers’ expectations. For the managers, the results of the conducted research suggest lack of the necessity for radical transformations, and transforming Polish shopping centres into facilities of the fourth and fifth generation, which is slow in Poland, is, as it turns out, not necessarily expected, since customers identify shopping centres mainly with their traditional function. Contribution & Value Added: The proposed research model and findings can serve as a useful lens within the research of tenant mix structure in shopping centres in other parts of the Poland.

Patients' views on price shopping and price transparency.

Science.gov (United States)

Semigran, Hannah L; Gourevitch, Rebecca; Sinaiko, Anna D; Cowling, David; Mehrotra, Ateev

2017-06-01

Driven by the growth of high deductibles and price transparency initiatives, patients are being encouraged to search for prices before seeking care, yet few do so. To understand why this is the case, we interviewed individuals who were offered access to a widely used price transparency website through their employer. Qualitative interviews. We interviewed individuals enrolled in a preferred provider organization product through their health plan about their experience using the price transparency tool (if they had done so), their past medical experiences, and their opinions on shopping for care. All interviews were transcribed and manually coded using a thematic coding guide. In general, respondents expressed frustration with healthcare costs and had a positive opinion of the idea of price shopping in theory, but 2 sets of barriers limited their ability to do so in reality. The first was the salience of searching for price information. For example, respondents recognized that due to their health plan benefits design, they would not save money by switching to a lower-cost provider. Second, other factors were more important than price for respondents when choosing a provider, including quality and loyalty to current providers. We found a disconnect between respondents' enthusiasm for price shopping and their reported use of a price transparency tool to shop for care. However, many did find the tool useful for other purposes, including checking their claims history. Addressing the barriers to price shopping identified by respondents can help inform ongoing and future price transparency initiatives.

Pengaruh Shopping Orientation, Online Trust Dan Prior Online Purchase Experience Terhadap Online Purchase Intention (Studi Pada Online Shop Hijabi House)

OpenAIRE

Azifah, Nurul; Dewi, Citra Kusuma

2016-01-01

Salah satu fashion yang semakin berkembang di kalangan masyarakat Indonesia khususnya wanita muslimah adalah jilbab. Hijabi House merupakan salah satu online shop yang menawarkan jilbab hasil produksinya melalui media sosial Instagram. Hasil wawancara awal, Hijabi House dinilai baik namun masih ada keluhan dari para followers berkaitan shopping orientation, online trust, dan prior online purchase experience. Penelitian yang bertujuan untuk mengetahui pengaruh ketiga variabel tersebut terhadap...

High School Girls’ Shopping Mall Experiences, Perceptions and Expectations: A Qualitative Study

OpenAIRE

Burcu Ilter TABAK; Ozge OZGEN; Bilge AYKOL

2006-01-01

Shopping malls have become an important part of the economic and social fabric of Turkey especially in some of the big cities. In Izmir, there are currently eight shopping malls and this number is expected to increase due to the interest of consumers and investors in shopping malls. This can lead to over saturation triggering high level of competition. Thus deeper understanding of consumer expectations, experiences and perceptions regarding mall image has become much more essential. Shopping ...

The Middle East in 2015: The Impact of Regional Trends in U.S. Strategic Planning

Science.gov (United States)

2002-07-01

iii Chapter 1 The Middle East in 2015: An Overview Judith S. Yaphe In the year 2000, two stereotypes of a “typical” Middle Easterncountry and...to the Leader’s call were actually moonlighting , driving cabs, and working in shops and restaurants to support their families. The Iraqi government...been said that the Hollywood film industry is inca- pable of dealing with marriage in its pictures. It is good at depict- ing romance and getting people

Cost-effectiveness analysis of introducing malaria diagnostic testing in drug shops

DEFF Research Database (Denmark)

Hansen, Kristian Schultz; Clarke, Siân E.; Lal, Sham

2017-01-01

Background Private sector drug shops are an important source of malaria treatment in Africa, yet diagnosis without parasitological testing is common among these providers. Accurate rapid diagnostic tests for malaria (mRDTs) require limited training and present an opportunity to increase access...... to correct diagnosis. The present study was a cost-effectiveness analysis of the introduction of mRDTs in Ugandan drug shops. Methods Drug shop vendors were trained to perform and sell subsidised mRDTs and artemisinin-based combination therapies (ACTs) in the intervention arm while vendors offered ACTs...... following presumptive diagnosis of malaria in the control arm. The effect on the proportion of customers with fever ‘appropriately treated of malaria with ACT’ was captured during a randomised trial in drug shops in Mukono District, Uganda. Health sector costs included: training of drug shop vendors...

Attitude of students towards online shopping of agricultural products ...

African Journals Online (AJOL)

The study examined the attitude of students towards online shopping in selected tertiary institutions in Ogun state. One hundred and thirty-five respondents were sampled using multistage and simple random sampling procedures. Variables measured included their attitude towards online shopping, the factors that affect ...

The Impact of Price Disclosure on Dynamic Shopping Decisions

NARCIS (Netherlands)

B.G.C. Dellaert (Benedict); V.Y. Golounov (Vladislav); J. Prabhu (Jaideep)

2005-01-01

textabstractA potentially powerful way to assist consumers in making dynamic shopping decisions is to disclose price information to them before they shop, for example by posting prices on the Internet. This paper addresses the differential impact of disclosing either only current, or both current

An Empirical Study Of Using New Technology like NFC, AI, RFID etc. to be implemented in shopping malls in ajmer : To Ease Out The Customer Shopping Experience Like Queue Less And Cashless Payment Mode

OpenAIRE

Dimple,; Jyoti Kushwah; Manisha Tak; Neeharika singh; Dr. Ajay Singh Jethoo; Vijay Laxmi Kalyani

2017-01-01

In today’s world due to rapid development of new shopping trend. The retailers launches new technologies for new shopping trend. In today scenario every people are busy. When we are talking about shopping from stores, shopping malls etc., the customers waiting in queue for long time for payment process. This is a problematic conditions for customers. The traditional shopping trend consuming more time of customers during shopping. To remove this problem many retailers are focussing that how to...

Comparison of opioid doctor shopping for tapentadol and oxycodone: a cohort study.

Science.gov (United States)

Cepeda, M Soledad; Fife, Daniel; Vo, Lien; Mastrogiovanni, Gregory; Yuan, Yingli

2013-02-01

Obtaining opioids from multiple prescribers, known as doctor shopping, is 1 example of opioid abuse and diversion. The dual mechanism of action of tapentadol could make tapentadol less likely to be abused than other opioids. The aim of this retrospective cohort study was to compare the risk of shopping behavior between tapentadol immediate release (IR) and oxycodone IR. Subjects exposed to tapentadol or oxycodone with no recent opioid use were included and followed for 1 year. The primary outcome was the proportion of subjects who developed shopping behavior defined as subjects who had opioid prescriptions written by >1 prescriber with ≥1 day of overlap filled at ≥3 pharmacies. The opioids involved in the shopping episodes were assessed. A total of 112,821 subjects were exposed to oxycodone and 42,940 to tapentadol. Shopping behavior was seen in .8% of the subjects in the oxycodone group and in .2% of the subjects in the tapentadol group, for an adjusted odds ratio of 3.5 (95% confidence interval, 2.8 to 4.4). In the oxycodone group, 28.0% of the shopping events involved exclusively oxycodone, whereas in the tapentadol group, .6% of the shopping events involved exclusively tapentadol. Results suggest that the risk of shopping behavior is substantially lower with tapentadol than with oxycodone. The risk of opioid doctor shopping, ie, obtaining opioid prescriptions from multiple prescribers, is lower with tapentadol than with oxycodone. Copyright © 2013 American Pain Society. Published by Elsevier Inc. All rights reserved.

Women who doctor shop for prescription drugs.

Science.gov (United States)

Worley, Julie; Thomas, Sandra P

2014-04-01

Doctor shopping is a term used to describe a form of diversion of prescription drugs when patients visit numerous prescribers to obtain controlled drugs for illicit use. Gender differences exist in regard to prescription drug abuse and methods of diversion. The purpose of this phenomenological study guided by the existential philosophy of Merleau-Ponty was to understand the lived experience of female doctor shoppers. Interviews were conducted with 14 women, which were recorded, transcribed, and analyzed. Included in the findings are figural aspects of the participants' experience of doctor shopping related to the existential grounds of world, time, body, and others. Four themes emerged from the data: (a) feeding the addiction, (b) networking with addicts, (c) playing the system, and (d) baiting the doctors. The findings suggest several measures that nurses can take to reduce the incidence of doctor shopping and to provide better care for female doctor shoppers.

Shopping versus Nature? An Exploratory Study of Everyday Experiences

Directory of Open Access Journals (Sweden)

Tony P. Craig

2018-01-01

Full Text Available Although a growing volume of empirical research shows that being in nature is important for human wellbeing, the definition of what constitutes an ‘experience in nature,’ and how this is different from other types of experiences, is very often left implied. In this paper we contrast everyday experiences involving nature with a category of everyday experience in which most people regularly partake. We present an exploratory study in which people (N = 357 were explicitly asked to describe a memory they had of an everyday ‘experience which involved nature,’ as well as an everyday ‘experience which involved shopping.’ The open-ended responses to these questions were analyzed both quantitatively and qualitatively. Nature experiences were generally found to be more positive than shopping experiences, and they were more likely to be rated as ‘peaceful’ and ‘active’ compared to shopping experiences. Follow-up analyses indicate a significant interaction between experience category (nature or shopping, and the relationship between connectedness to nature and the amount of pleasure associated with that experience: The more strongly connected to nature a respondent was, the larger the disparity between the pleasantness of the shopping experience and that of the experience in nature tended to be.

Shopping behaviour and attribute evaluation of expatriates – A cross-cultural study

NARCIS (Netherlands)

Wijnen, G.J.; Kemperman, A.D.A.M.; Janssen, I.I.

2011-01-01

This study explores how shopping centre attributes can be adapted to culture-related shopping behaviour of expatriates. The study is relevant since only limited information is available on consumer behaviour of this target group and since insight in the heterogeneity of consumer shopping behaviour

ENVIRONMENTAL ASSESSMENT OF SHOP TOWEL USAGE IN THE AUTOMOTIVE AND PRINTING INDUSTRIES

Science.gov (United States)

This assessment identifies the environmental impacts and usage trends of shop towels in the printing and automotive repair industries. The shop towels are used to clean equipment and to wipe up contaminants for a variety of operations. Four types of shop towels were evaluated; wo...

Print and Internet Catalog Shopping: Assessing Attitudes and Intentions.

Science.gov (United States)

Vijayasarathy, Leo R.; Jones, Joseph M.

2000-01-01

Findings of an empirical study that compared individuals' attitudes and intentions to shop using print and Internet catalogs suggest that individuals perceived differences between the two catalog media on the shopping factors of reliability, tangibility, and consumer risk. Product value, pre-order information, post-selection information, shopping…

Attitude theory applied to in-store and online shopping

NARCIS (Netherlands)

Dijst, M.J.; Farag, S.; Schwanen, T.

2005-01-01

In this study, we investigated whether our understanding of adoption of e-shopping and instore shopping could be advanced through the application of attitude theory. A shortcoming of the analytical frameworks and models featured in attitude theory is that they do not address the issue of what

CONSUMIDOR ADOLESCENTE EM AMBIENTE DE SHOPPING CENTER

Directory of Open Access Journals (Sweden)

Lunie Imamura Lima

2009-07-01

shopping center da cidade de Fortaleza (CE e objetivou conhecer as características bio-demográficas, os hábitos de utilização do shopping e os principais elementos influenciadores do processo de decisão de compra deste segmento. De natureza descritiva, quantitativa, com corte transversal; a pesquisa utilizou um questionário estruturado aplicado a uma amostra não-probabilística por conveniência, com maioria do sexo masculino, faixa etária entre 13 e 15 anos, provenientes de famílias de classe alta e renda familiar mensal superior a R$ 2700,00. Os resultados demonstraram que a maioria dos respondentes recebe mesada no valor menor que R$ 80,00; vai ao shopping de carro com pais ou parentes; gasta de R$ 10,00 a R$ 30,00; freqüenta o local 3 vezes na semana; permanece de 4 a 6 horas e é acompanhado pelos amigos. Ainda mostrou que pais ou familiares são os principais elementos influenciadores do processo de decisão de compra, enquanto os amigos os principais meios de informações sobre novos produtos. O estudo pretende contribuir com a literatura científica nas áreas de Marketing e Comportamento do consumidor e servir de instrumento gerencial aos dirigentes de shopping centers.

[Twisting and turning; the development of the Dutch science shops].

Science.gov (United States)

Lursen, M; Mulder, H; Lieshout, M

2000-01-01

The concept of science shops (Wetenschapswinkels) originates from the Netherlands. Science shops were based on the idea that universities had to play a more prominent role in the solution of social problems - an outcome of the discussion, initiated by students, on the democratisation of universities in the early 1970s. Starting as voluntary student organisations supported by individual staff members from the universities, they were devoted to give oppressed minority groups and the financially weak access to scientific research. Slowly, acknowledgement came. Science shops began to receive financial support from university boards. Support also came from the Dutch government. By now science shops have professionalized and most of them are well embedded in their universities. Many developments within society and the universities influenced the work and structure of the science shops. Positive developments were professionalization, growth, becoming embedded, and the introduction of new research themes. There were also negative developments, such as budget cuts and the fact that 'service to society' ceased to be a government objective for the universities. These led to recurring struggles for survival, which were not always won. Interest in the science shop concept has grown in other countries over the last years. In the 1980s, the system spread within Western Europe. Similar activities, based on the Dutch model, have started in North America and Eastern Europe in the 1990s. The activities on the international level led to an E.U. financial project to prepare an international network of science shops, which commenced in 1999. With information exchange and international cooperation as its major goals, the network will create new opportunties for the future.

Breaking Out of the Local: International dimensions of science shops

OpenAIRE

DeBok, Caspar; Steinhaus, Norbert

2008-01-01

In this article we want to give an overview of the international dimension and the interest of the European Union (EU) in the concept of Science Shops. The European Commission (EC) manages the day-to-day business by initiating and implementing EU policies and spending EU funds. The EC support for Science Shops has been an important factor for the international interest and progress of the Science Shop movement. This article will not give detailed information about daily routines of a Science ...

Performance comparison of some evolutionary algorithms on job shop scheduling problems

Science.gov (United States)

Mishra, S. K.; Rao, C. S. P.

2016-09-01

Job Shop Scheduling as a state space search problem belonging to NP-hard category due to its complexity and combinational explosion of states. Several naturally inspire evolutionary methods have been developed to solve Job Shop Scheduling Problems. In this paper the evolutionary methods namely Particles Swarm Optimization, Artificial Intelligence, Invasive Weed Optimization, Bacterial Foraging Optimization, Music Based Harmony Search Algorithms are applied and find tuned to model and solve Job Shop Scheduling Problems. To compare about 250 Bench Mark instances have been used to evaluate the performance of these algorithms. The capabilities of each these algorithms in solving Job Shop Scheduling Problems are outlined.

Store Location in Shopping Centers: Theory & Estimates

OpenAIRE

Kerry D. Vandell; Charles C. Carter

2000-01-01

This paper develops a formal theory of store location within shopping centers based on bid rent theory. The bid rent model is fully speci?ed and solved with the objective function of pro?t maximization in the presence of comparative, multipurpose and impulse shopping behavior. Several hypotheses result about the optimal relationships between store types, sizes, rents, sales, and distances from the mall center. The hypotheses are tested and con?rmed using data from a sample of 689 leases in ei...

An Exploratory Study of Factors Affecting Consumer International Online Shopping Behavior

OpenAIRE

Pingjun Jiang; David B. Jones

2014-01-01

Few studies in the literature on electronic commerce provide empirical investigation of consumer behavior in the international online shopping context. This study identifies and discusses factors that influence international online purchases and profile the characteristics of those who purchase and those who do not purchase from online stores overseas in three main categories: the online shopping experiential factors, the international shopping motivational factors, and the international trus...

Using the Vape Shop Standardized Tobacco Assessment for Retail Settings (V-STARS) to Assess Product Availability, Price Promotions, and Messaging in New Hampshire Vape Shop Retailers.

Science.gov (United States)

Kong, Amanda Y; Eaddy, Jessica L; Morrison, Susan L; Asbury, Donna; Lindell, Kristine M; Ribisl, Kurt M

2017-04-01

This is the first statewide census of the product availability, price promotions, and product messaging of vape shops. A comprehensive list of New Hampshire vape shops was developed through a previously validated online search method. Store audits were conducted in 55 stores between January and February 2016 using the Vape Shop Standardized Tobacco Assessment for Retail Settings (V-STARS). Modifiable devices and cig-alikes were sold in 92.6% and 14.6% of stores, respectively. Cross-product promotions with tobacco products were rare, and messaging promoting e-cigarettes as effective cessation devices was found in 27.3% of all stores. Candy/fruit and menthol e-liquids were most commonly found in stores, and sampling of products was available in 83.6% of stores. Ten (18.2%) stores did not have a minimum age sign posted, and self-service sampling displays were available in about one-fifth of stores. Using V-STARS to conduct retail assessments of vape shops is feasible and is important for assessing the changing retail environment of vape shops. Vape shops distinguish themselves from traditional tobacco product retailers and offer a variety of products to customize a consumer's experience. Regulations and effective enforcement ensuring accurate health messages is essential.

Using the Vape Shop Standardized Tobacco Assessment for Retail Settings (V-STARS) to Assess Product Availability, Price Promotions, and Messaging in New Hampshire Vape Shop Retailers

Science.gov (United States)

Kong, Amanda Y.; Eaddy, Jessica L.; Morrison, Susan L.; Asbury, Donna; Lindell, Kristine M.; Ribisl, Kurt M.

2017-01-01

Objectives This is the first statewide census of the product availability, price promotions, and product messaging of vape shops. Methods A comprehensive list of New Hampshire vape shops was developed through a previously validated online search method. Store audits were conducted in 55 stores between January and February 2016 using the Vape Shop Standardized Tobacco Assessment for Retail Settings (V-STARS). Results Modifiable devices and cig-alikes were sold in 92.6% and 14.6% of stores, respectively. Cross-product promotions with tobacco products were rare, and messaging promoting e-cigarettes as effective cessation devices was found in 27.3% of all stores. Candy/fruit and menthol e-liquids were most commonly found in stores, and sampling of products was available in 83.6% of stores. Ten (18.2%) stores did not have a minimum age sign posted, and self-service sampling displays were available in about one-fifth of stores. Conclusions Using V-STARS to conduct retail assessments of vape shops is feasible and is important for assessing the changing retail environment of vape shops. Vape shops distinguish themselves from traditional tobacco product retailers and offer a variety of products to customize a consumer’s experience. Regulations and effective enforcement ensuring accurate health messages is essential. PMID:29201950

Determinants of Online Shopping and Moderating Role of Innovativeness and Perceived Risk

OpenAIRE

Muhammad Rizwan; Hamna Sultan; Sadia Parveen; Shumaila Nawaz; Samreen Sattar; Maryam Sana

2013-01-01

Time and trend wait for none. We are no more in Stone Age. It is 2012, Glass Age, where time is money, so better skips the malls and start online shopping. The basis of this revision is to discover the influence of different variables on future intention of online shopping and the perception of people about online shopping as how people perceive shopping via internet by using technology. This research offers insight into the consumer’s attitude. The outcomes have very significant effects on s...

Consumers' perceptions of vape shops in Southern California: an analysis of online Yelp reviews.

Science.gov (United States)

Sussman, Steve; Garcia, Robert; Cruz, Tess Boley; Baezconde-Garbanati, Lourdes; Pentz, Mary Ann; Unger, Jennifer B

2014-01-01

E-cigarettes are sold at many different types of retail establishments. A new type of shop has emerged, the vape shop, which specializes in sales of varied types of e-cigarettes. Vape shops allow users to sample several types. There are no empirical research articles on vape shops. Information is needed on consumers' beliefs and behaviors about these shops, the range of products sold, marketing practices, and variation in shop characteristics by ethnic community and potential counter-marketing messages. This study is the first to investigate marketing characteristics of vape shops located in different ethnic neighborhoods in Los Angeles, by conducting a Yelp electronic search and content analysis of consumer reports on vape shops they have visited. The primary measure was Yelp reviews (N = 103 vape shops in the Los Angeles, California area), which were retrieved and content coded. We compared the attributes of vape shops representing four ethnic communities: African American, Hispanic/Latino, Korean, and White. Vape shop attributes listed as most important were the selection of flavors or hardware (95%), fair prices (92%), and unique flavors or hardware (89%). Important staff marketing attributes included being friendly (99%), helpful/patient/respectful (97%), and knowledgeable/professional (95%). Over one-half of the shops were rated as clean (52%) and relaxed (61%). Relatively few of the reviews mentioned quitting smoking (32%) or safety of e-cigarettes (15%). The selection of flavors and hardware appeared relatively important in Korean ethnic location vape shops. Yelp reviews may influence potential consumers. As such, the present study's focus on Yelp reviews addressed at least eight of the FDA's Center for Tobacco Products' priorities pertaining to marketing influences on consumer beliefs and behaviors. The findings suggest that there were several vape shop and product attributes that consumers considered important to disseminate to others through postings on

Rostocker Hof shopping mall; Galerie Rostocker Hof

Energy Technology Data Exchange (ETDEWEB)

Anon.

1998-06-01

The Rostocker Hof shopping mall comprises a 151-room hotel, a shopping mall of 45 shops, 22230m{sup 2} of office floor, and an underground garage with 308 parking lots. The following systems are described: Heating systems, air conditioning systems, refrigeration systems, ventilation systems, fire protection systems and electrical installation. Heat is supplied by the district heating grids. Circuit diagrams and flow charts are presented for the heat exchangers and heat supply system, the air conditioning system, the sanitary and sprinkler systems, and the single-room control systems for heat and fresh air supply. (MSK) [Deutsch] Der Rostocker Hof umfasst ein Hotel mit 151 Zimmern, eine Einzelhandelspassage mit 45 Laeden sowie 2230qm Bueronutzungsflaeche und eine Tiefgarage mit 308 Stellplaetzen. Die Haustechnik wird in folgenden Punkten erlaeutert: Heizungtechnik, Klimatechnik, Kaeltetechnik, Lueftungstechnik, Brandschutzanlage sowie Elektroinstallation. Die Waermerversorgung erfolgt durch Fernwaerme. Schaltplaene bzw. Funktionsablaeufe sind fuer die Waermeuebergabestation, die Waermeaufbereitung, die Luftaufbereitungsanlage, die Sanitaer- und Sprinkleranlage sowie fuer die Waerme- und Raumluftregelung der Einzelraeume enthalten. (MSK)

The construction and evaluation of a scale of consumer shopping experience

Directory of Open Access Journals (Sweden)

B. A. Gillham

2003-10-01

Full Text Available Generally speaking consumer psychology have focused primarily on the problem solving and decision making processes underlying buying behaviour. As a result, the experience of consumers engaging in the activity of shopping has been neglected. The purpose of this study was to construct and evaluate a scale of consumer shopping experience. The instrument indicated that shopping experience is not merely a means to an end, but in many cases an end in itself. The Shopping Experience Survey consisting of 54 items was developed and administered to 426 respondents consisting of students at a large tertiary institution. The study indicated that the Shopping Experience Survey is highly reliable (rxx=0,965 and sensitive to group differences. Opsomming Benaderings tot verbruikersielkunde fokus in die algemeen hoofsaaklik op die probleemoplossings- en besluitnemingsprosesse onderliggend aan aankoopgedrag. Gevolglik het die ervarings wat verbruikers tydens die aankoopproses beleef, nie veel aandag geniet nie. Die doel van die onderhawige studie was om ’n skaal van verbruikeraankoopbelewenisse te konstrueer en te evalueer. Die instrument het aangedui dat die aankoopbelewenis nie ’n middel tot ’n doel is nie, maar ‘n doel insigself is. Die Shopping Experience Survey, bestaande uit 54 items, is ontwikkel en geadministreer aan 426 respondente van ’n groot residensiële tersiêre instelling. Met die studie is bevind dat die Shopping Experience Survey hoogs betroubaar is (rxx=0,965 en sensitief is vir groepverskille.

Job shop scheduling with makespan objective: A heuristic approach

Directory of Open Access Journals (Sweden)

Mohsen Ziaee

2014-04-01

Full Text Available Job shop has been considered as one of the most challenging scheduling problems and there are literally tremendous efforts on reducing the complexity of solution procedure for solving job shop problem. This paper presents a heuristic method to minimize makespan for different jobs in a job shop scheduling. The proposed model is based on a constructive procedure to obtain good quality schedules, very quickly. The performance of the proposed model of this paper is examined on standard benchmarks from the literature in order to evaluate its performance. Computational results show that, despite its simplicity, the proposed heuristic is computationally efficient and practical approach for the problem.

A Hybrid Genetic Algorithm with a Knowledge-Based Operator for Solving the Job Shop Scheduling Problems

Directory of Open Access Journals (Sweden)

Hamed Piroozfard

2016-01-01

Full Text Available Scheduling is considered as an important topic in production management and combinatorial optimization in which it ubiquitously exists in most of the real-world applications. The attempts of finding optimal or near optimal solutions for the job shop scheduling problems are deemed important, because they are characterized as highly complex and NP-hard problems. This paper describes the development of a hybrid genetic algorithm for solving the nonpreemptive job shop scheduling problems with the objective of minimizing makespan. In order to solve the presented problem more effectively, an operation-based representation was used to enable the construction of feasible schedules. In addition, a new knowledge-based operator was designed based on the problem’s characteristics in order to use machines’ idle times to improve the solution quality, and it was developed in the context of function evaluation. A machine based precedence preserving order-based crossover was proposed to generate the offspring. Furthermore, a simulated annealing based neighborhood search technique was used to improve the local exploitation ability of the algorithm and to increase its population diversity. In order to prove the efficiency and effectiveness of the proposed algorithm, numerous benchmarked instances were collected from the Operations Research Library. Computational results of the proposed hybrid genetic algorithm demonstrate its effectiveness.

The new century: Lessons learned from Singapore's shopping sector during the 1990's

OpenAIRE

Brenda J. Moscove; Robert G. Fletcher

2001-01-01

Singapore's main shopping corridor, Orchard Road, is being challenged as the international shopping paradise for residents and visitors. It no longer reigns supreme as the mecca for international shopping. The loss of prestige and dominance can be attributed to recent shifts in the Singaporean and regional marketplace such as: economic recession, tourism industry slump, societal concerns, technological trends and innovations, shopping sector development in the region, and political uncertaint...

Window shopping

OpenAIRE

Oz Shy

2013-01-01

The terms "window shopping" and "showrooming" refer to the activity in which potential buyers visit a brick-and-mortar store to examine a product but end up either not buying it or buying the product from an online retailer. This paper analyzes potential buyers who differ in their preference for after-sale service that is not offered by online retailers. For some buyers, making a trip to the brick-and-mortar store is costly; however, going to the store to examine the product has the advantage...

Measuring large aspherics using a commercially available 3D-coordinate measuring machine

Science.gov (United States)

Otto, Wolfgang; Matthes, Axel; Schiehle, Heinz

2000-07-01

A CNC-controlled precision measuring machine is a very powerful tool in the optical shop not only to determine the surface figure, but also to qualify the radius of curvature and conic constant of aspherics. We used a commercially available 3D-coordinate measuring machine (CMM, ZEISS UPMC 850 CARAT S-ACC) to measure the shape of the GEMINI 1-m convex secondary mirrors at different lapping and polishing stages. To determine the measuring accuracy we compared the mechanical measurements with the results achieved by means of an interferometrical test setup. The data obtained in an early stage of polishing were evaluated in Zernike polynomials which show a very good agreement. The deviation concerning long wave rotational symmetrical errors was 20 nm rms, whereas the accuracy measuring of mid spatial frequency deviations was limited to about 100 nm rms.

Cryptanalysis and improvement of a quantum communication-based online shopping mechanism

Science.gov (United States)

Huang, Wei; Yang, Ying-Hui; Jia, Heng-Yue

2015-06-01

Recently, Chou et al. (Electron Commer Res 14:349-367, 2014) presented a novel controlled quantum secure direct communication protocol which can be used for online shopping. The authors claimed that their protocol was immune to the attacks from both external eavesdropper and internal betrayer. However, we find that this protocol is vulnerable to the attack from internal betrayer. In this paper, we analyze the security of this protocol to show that the controller in this protocol is able to eavesdrop the secret information of the sender (i.e., the customer's shopping information), which indicates that it cannot be used for secure online shopping as the authors expected. Accordingly, an improvement of this protocol, which could resist the controller's attack, is proposed. In addition, we present another protocol which is more appropriate for online shopping. Finally, a discussion about the difference in detail of the quantum secure direct communication process between regular quantum communications and online shopping is given.

E-shopping: Current Practices and Future Opportunities Towards Malaysian Customer Perspective

OpenAIRE

Ahasanul Haque; Ali Khatibi

2005-01-01

The rapid diffusion on the internet widely documented high growth potential of Internet shopping in Malaysia, apparently there is still lack of understanding concerning the characteristics of Internet shopping in Malaysia and its potential impact on consumer marketing. Therefore, this study aims to establish a preliminary assessment, evaluation and understanding of the characteristics of Internet shopping in Malaysia. The results of this study indicated significantly mean difference between u...

New Mathematical Model and Algorithm for Economic Lot Scheduling Problem in Flexible Flow Shop

Directory of Open Access Journals (Sweden)

H. Zohali

2018-03-01

Full Text Available This paper addresses the lot sizing and scheduling problem for a number of products in flexible flow shop with identical parallel machines. The production stages are in series, while separated by finite intermediate buffers. The objective is to minimize the sum of setup and inventory holding costs per unit of time. The available mathematical model of this problem in the literature suffers from huge complexity in terms of size and computation. In this paper, a new mixed integer linear program is developed for delay with the huge dimentions of the problem. Also, a new meta heuristic algorithm is developed for the problem. The results of the numerical experiments represent a significant advantage of the proposed model and algorithm compared with the available models and algorithms in the literature.

Shopping Mall to Study Hall.

Science.gov (United States)

Rittner-Heir, Robbin M.

1999-01-01

Discusses how the Burnsville (Minnesota) expanded its high school classroom space by buying a shopping mall and converting it into classrooms. Renovation costs and classroom layout are briefly discussed; a floor plan is included. (GR)

Street Choice Logit Model for Visitors in Shopping Districts

Science.gov (United States)

Kawada, Ko; Yamada, Takashi; Kishimoto, Tatsuya

2014-01-01

In this study, we propose two models for predicting people’s activity. The first model is the pedestrian distribution prediction (or postdiction) model by multiple regression analysis using space syntax indices of urban fabric and people distribution data obtained from a field survey. The second model is a street choice model for visitors using multinomial logit model. We performed a questionnaire survey on the field to investigate the strolling routes of 46 visitors and obtained a total of 1211 street choices in their routes. We proposed a utility function, sum of weighted space syntax indices, and other indices, and estimated the parameters for weights on the basis of maximum likelihood. These models consider both street networks, distance from destination, direction of the street choice and other spatial compositions (numbers of pedestrians, cars, shops, and elevation). The first model explains the characteristics of the street where many people tend to walk or stay. The second model explains the mechanism underlying the street choice of visitors and clarifies the differences in the weights of street choice parameters among the various attributes, such as gender, existence of destinations, number of people, etc. For all the attributes considered, the influences of DISTANCE and DIRECTION are strong. On the other hand, the influences of Int.V, SHOPS, CARS, ELEVATION, and WIDTH are different for each attribute. People with defined destinations tend to choose streets that “have more shops, and are wider and lower”. In contrast, people with undefined destinations tend to choose streets of high Int.V. The choice of males is affected by Int.V, SHOPS, WIDTH (positive) and CARS (negative). Females prefer streets that have many shops, and couples tend to choose downhill streets. The behavior of individual persons is affected by all variables. The behavior of people visiting in groups is affected by SHOP and WIDTH (positive). PMID:25379274

Street Choice Logit Model for Visitors in Shopping Districts

Directory of Open Access Journals (Sweden)

Ko Kawada

2014-07-01

Full Text Available In this study, we propose two models for predicting people’s activity. The first model is the pedestrian distribution prediction (or postdiction model by multiple regression analysis using space syntax indices of urban fabric and people distribution data obtained from a field survey. The second model is a street choice model for visitors using multinomial logit model. We performed a questionnaire survey on the field to investigate the strolling routes of 46 visitors and obtained a total of 1211 street choices in their routes. We proposed a utility function, sum of weighted space syntax indices, and other indices, and estimated the parameters for weights on the basis of maximum likelihood. These models consider both street networks, distance from destination, direction of the street choice and other spatial compositions (numbers of pedestrians, cars, shops, and elevation. The first model explains the characteristics of the street where many people tend to walk or stay. The second model explains the mechanism underlying the street choice of visitors and clarifies the differences in the weights of street choice parameters among the various attributes, such as gender, existence of destinations, number of people, etc. For all the attributes considered, the influences of DISTANCE and DIRECTION are strong. On the other hand, the influences of Int.V, SHOPS, CARS, ELEVATION, and WIDTH are different for each attribute. People with defined destinations tend to choose streets that “have more shops, and are wider and lower”. In contrast, people with undefined destinations tend to choose streets of high Int.V. The choice of males is affected by Int.V, SHOPS, WIDTH (positive and CARS (negative. Females prefer streets that have many shops, and couples tend to choose downhill streets. The behavior of individual persons is affected by all variables. The behavior of people visiting in groups is affected by SHOP and WIDTH (positive.

Design of magnetic probe coils in the EAST tokamak

International Nuclear Information System (INIS)

Xi Weibin; Wu Songtao; Shen Biao; Wan Baonan; Song Yuntao

2008-01-01

A detailed description of measurement theory, magnetic probes geometry, fabrication, calibration, and frequency response is introduced. The calibration error of the magnetic probe and the frequency response of Mirnov coil are given. The EAST experiments show that magnetic sensors could provide sufficient information for machine operation and plasma control. (authors)

An Approach to Teaching Young Children about "The Shop."

Science.gov (United States)

Pramling, Ingrid

An attempt was made to increase Swedish preschool children's understanding of aspects of commercial enterprise, particularly those of "the shop," by introducing a specific didactic approach to preschool education. Of particular interest were two aspects of the shop: advertising and the principle of trade. A total of 77 children up to 7 years of…

The effects of online shopping on the customer loyalty

Directory of Open Access Journals (Sweden)

Hamideh Afrashteh

2014-09-01

Full Text Available This paper investigates the use of Online Shopping as one of electronic marketing techniques as well as the effect of applying this shopping method and marketing on customer loyalty in Iran. The variables are extracted according to the review of literature and studies conducted in the field of shopping through cyberspace. A questionnaire is designed by applying these variables and distributed among a sample of service providers and users after testing its reliability and validity. Performing the statistical tests on the results of investigation led to the identification of effective factors. In addition, another questionnaire is distributed according to the obtained components in order to achieve a structural model for the impact of components on the customer loyalty. The structural equation modeling (SEM is designed to learn the impact of obtained components on customer loyalty as a basis influencing on the survival of business space using SEM method. The study identified different components affected by utilization of online shopping websites including comprehensive information system, system development, choice power, viability and system optimization.

Interaction between NGOs and science through science shops

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard

and institutions have more resources themselves and easier access to and influence on the research facilities than NGO’s like consumer organisations, environmental organisations, trade unions, social organisations etc. Science shops are organisations that offer NGO’s free or very low-cost access to scientific...... knowledge and research in order to help them achieve social and environmental improvement. Originally developed at Dutch universities during the 1970’s, science shops now also exist in Austria, Denmark, Germany, Romania and the U.K., as well as in a number of non-European countries including Australia......, Canada, Malaysia, South Korea and the USA. Some science shops are independent not-for-profit research centres and some are affiliated to a university acting as the intermediary between NGO’s and university researchers, teachers and students, who conduct research in response. Most university based science...

The social value of Science Shops: a Cost-Benefit Analysis

NARCIS (Netherlands)

Boere, E.J.M.; Heijman, W.J.M.

2012-01-01

We describe and apply a method to determine the net social benefits of science shops. University departments operating as science shops coordinate research projects for individuals or civil society organizations (CSO) lacking the financial means to turn to professional consultancy bureaus. Three

ShopList: Programming PDA applications for Windows Mobile using C#

Directory of Open Access Journals (Sweden)

Dan L. Lacrama

2007-01-01

Full Text Available This paper is focused on a C# and Sql Server Mobile 2005 application to keep evidence of a shop list. The purpose of the application is to offer to the user an easier way to manage his shopping options.

Design and Testing of an Air Force Services Mystery Shopping Program

National Research Council Canada - National Science Library

Hall, Justin

1998-01-01

.... Other service quality measurement methods such as mystery shopping are rarely used. Bases do not consider using mystery shopping programs because of the significant resources required to start the program...

THE INTELLECTUAL STRUCTURE OF ONLINE SHOPPING RESEARCH: AUTHOR CO-CITATION ANALYSIS

Directory of Open Access Journals (Sweden)

Wann-Yih Wu

2016-06-01

Full Text Available This study was conducted to investigate the intellectual structure of the online shopping field in the last decade using co-citation analysis. The citations were obtained from the database of WOS (World of Science, and articles (authors were used as the units of analysis. Based on the results, this research revealed the main categories in the field of online shopping and the relationships between the subfields of research subjects and among authors and identified the authors who play a central role in the conceptual domains of online shopping. This research outlines the intellectual structure of the field of online shopping and its development trends. It also provides details about the influence of individual authors and the evolving structure of this research field over time.

Beyond Promotion-Based Store Switching : Antecedents and Consequences of Systematic Multiple-Store Shopping

NARCIS (Netherlands)

Gijsbrechts, E.; Campo, K.; Nisol, P.

2005-01-01

In this paper, we demonstrate that single-purpose multiple store shopping is not only driven by opportunistic, promotion-based motivations, but may also be part of a longer term shopping planning process based on stable store characteristics.Starting from a utility-maximizing shopping behavior

Who walks into vape shops in Southern California?: a naturalistic observation of customers.

Science.gov (United States)

Sussman, Steve; Allem, Jon-Patrick; Garcia, Jocelyn; Unger, Jennifer B; Cruz, Tess Boley; Garcia, Robert; Baezconde-Garbanati, Lourdes

2016-01-01

The rising popularity of electronic cigarettes (e-cigarettes) has been accompanied by the proliferation of vape shops in the United States. Vape shops are devoted to the sale of e-cigarettes and e-juices. This study aimed to describe the age, gender, and ethnicity of customers who frequent these shops, determine whether conversations transpire between retailers and customers, as well as identify the types of activities taking place while customers are inside the store. A naturalistic observation study of 186 customers in 59 vape shops in Southern California was completed in locations that were relatively high in Korean, Non-Hispanic white, Hispanic, or African American ethnicity. Across all shops, the average estimated age of customers was 30.29 years old (SD = 9.70), 53 % were estimated to be non-Hispanic white, and 79 % were males; few minors entered the shops. Conversations about vaping related topics were prevalent (e.g., sampling e-juices, receiving help on hardware, and talking about vaping). Purchases were commonly observed as well as customers lounging in the shop. Vape shops provide consumers a place to purchase and discuss e-cigarettes and offer an environment that serves as a place of recreation with customers lounging once inside. Findings should inform local tobacco control efforts and regulatory policies in the future.

Indoor air quality at nine shopping malls in Hong Kong.

Science.gov (United States)

Li, W M; Lee, S C; Chan, L Y

2001-06-12

Hong Kong is one of the most attractive shopping paradises in the world. Many local people and international tourists favor to spend their time in shopping malls in Hong Kong. Good indoor air quality is, therefore, very essential to shoppers. In order to characterize the indoor air quality in shopping malls, nine shopping malls in Hong Kong were selected for this study. The indoor air pollutants included carbon dioxide (CO2), carbon monoxide (CO), total hydrocarbons (THC), formaldehyde (HCHO), respirable particulate matter (PM10) and total bacteria count (TBC). More than 40% of the shopping malls had 1-h average CO2 levels above the 1000 ppm of the ASHRAE standard on both weekdays and weekends. Also, they had average weekday PM10 concentrations that exceeded the Hong Kong Indoor Air Quality Objective (HKIAQO). The highest indoor PM10 level at a mall was 380 microg/m3. Of the malls surveyed, 30% had indoor airborne bacteria levels above 1000 cfu/m3 set by the HKIAQO. The elevated indoor CO2 and bacteria levels could result from high occupancy combined with insufficient ventilation. The increased PM10 levels could be probably attributed to illegal smoking inside these establishments. In comparison, the shopping malls that contained internal public transport drop-off areas, where vehicles were parked with idling engines and had major entry doors close to heavy traffic roads had higher CO and PM10 indoor levels. In addition, the extensive use of cooking stoves without adequate ventilation inside food courts could increase indoor CO2, CO and PM10 levels.

Investigation and Evaluation of the Effect to Environmental Pollution of Plastic Shopping Bags

OpenAIRE

DURAK, Sevgi Güneş

2016-01-01

Shopping which is related to the level of economic development, except for consumption necessities such as eating-drinking-dressing, is taken up a wide space extremely in today’s conditions. By increasing in the number of shopping, environmental pollution increases, too. Plastic bags (shopping bags) used in shopping have a duration of extinction in the nature 400-1000 years, during this time, plastic bags enter the food web and are toxic for human and other livings as a soil pollutant; cause ...

Health Risk Screening Practices of Pharmacy and Chemist Shops in ...

African Journals Online (AJOL)

Methodology: Fifty two pharmacy and chemist shops were selected using simple random number sampling technique from 120 registered pharmacy and chemist shops in Jos Metropolis. A semi-structured questionnaire, examining the screening practice of the sales persons was interviewer administered to all the sales ...

THE LIFE CYCLE OF SHOPPING CENTERS AND POSSIBLE REVITALIZATION STRATEGIES

Directory of Open Access Journals (Sweden)

Dabija Dan Cristian

2009-05-01

Full Text Available This paper addresses the concept of shopping center life cycle. The concept is considered a possible explanation for the death of certain types of shopping centers and birth of others. Of course that there are also other theories that explains this evolut

A Qualitative Exploration of the Role of Vape Shop Environments in Supporting Smoking Abstinence

Directory of Open Access Journals (Sweden)

Emma Ward

2018-02-01

Full Text Available E-cigarettes are the most popular method of quitting smoking in England and most are purchased in specialist vape shops. This qualitative study explores how the vape shop environment is experienced by quitters to support smoking abstinence. Semi-structured qualitative interviews were conducted to elicit experiences of e-cigarette use, including experiences of vape shops, in 40 people who had used e-cigarettes in a quit attempt. Observations of six shops in a range of locations were also undertaken. Interview and observation data were analysed using inductive thematic analysis and triangulated. At an individual level, smoking abstinence was supported through shop assistants’ attempts to understand customers’ smoking preferences in order to: (i tailor advice about the most appropriate product; and (ii offer an ongoing point of contact for practical help. At an interpersonal level, shops offered opportunity to socialise and reinforce a vaping identity, although the environment was perceived as intimidating for some (e.g., new and female users. At a structural level, shops ensured easy access to products perceived to be good value by customers and had adapted to legislative changes. Vape shops can provide effective behavioural support to quitters to maintain smoking abstinence. Health professionals could capitalise on this through partnership working with shops, to ensure best outcomes for clients wanting to use e-cigarettes to quit smoking.

A Qualitative Exploration of the Role of Vape Shop Environments in Supporting Smoking Abstinence

Science.gov (United States)

Jakes, Sarah; Holland, Richard; Notley, Caitlin

2018-01-01

E-cigarettes are the most popular method of quitting smoking in England and most are purchased in specialist vape shops. This qualitative study explores how the vape shop environment is experienced by quitters to support smoking abstinence. Semi-structured qualitative interviews were conducted to elicit experiences of e-cigarette use, including experiences of vape shops, in 40 people who had used e-cigarettes in a quit attempt. Observations of six shops in a range of locations were also undertaken. Interview and observation data were analysed using inductive thematic analysis and triangulated. At an individual level, smoking abstinence was supported through shop assistants’ attempts to understand customers’ smoking preferences in order to: (i) tailor advice about the most appropriate product; and (ii) offer an ongoing point of contact for practical help. At an interpersonal level, shops offered opportunity to socialise and reinforce a vaping identity, although the environment was perceived as intimidating for some (e.g., new and female users). At a structural level, shops ensured easy access to products perceived to be good value by customers and had adapted to legislative changes. Vape shops can provide effective behavioural support to quitters to maintain smoking abstinence. Health professionals could capitalise on this through partnership working with shops, to ensure best outcomes for clients wanting to use e-cigarettes to quit smoking. PMID:29425117

The performance of workload control concepts in job shops : Improving the release method

NARCIS (Netherlands)

Land, MJ; Gaalman, GJC

1998-01-01

A specific class of production control concepts for jobs shops is based on the principles of workload control. Practitioners emphasise the importance of workload control. However, order release methods that reduce the workload on the shop floor show poor due date performance in job shop simulations.

The Associations between Yelp Online Reviews and Vape Shops Closing or Remaining Open One Year Later.

Science.gov (United States)

Kong, Grace; Unger, Jennifer; Baezconde-Garbanati, Lourdes; Sussman, Steve

2017-01-01

Vape shops are popular brick-and-mortar stores that sell e-cigarette products but are not understood well. Previous analysis of Yelp reviews of vape shops located in various ethnic neighborhoods in Los Angeles, California in 2014 identified characteristics of vape shop as delineated by consumers. In this study, we assessed the associations between these characteristics and vape shops going out of business in 2015. Content analysis of Yelp reviews of 72 vape shops in 2014 identified 1) general characteristics of the reviews/reviewers, 2) vape shop, staff, and marketing attributes, 3) physical environment, and 4) health claims. In 2015, in-person visits confirmed that 22% of these vape shops closed permanently. We analyzed whether characteristics/attributes identified in 2014 associated with stores remaining open (n = 56) or permanently closing (n = 16) in 2015. Univariate findings showed that open vape shops relative to closed shops had greater 1) number of reviews, 2) rebuilds/fixings, 3) ratings of staff attributes as "helpful/patient/respectful," and 4) report of the physical environment as "bar type." Bar type vape shops and those with rebuilding/fixing capabilities were associated with staying open, suggesting the popularity of these attributes. Yelp consumer reviews is a useful research tool to identify consumer-determined important sustaining attributes of vape shops and may be used to identify aspects of enduring shops that need regulations.

Difficulty and independence in shopping among older Americans: more than just leaving the house.

Science.gov (United States)

Brenner, Allison B; Clarke, Philippa J

2017-11-09

The built, social and economic environments are associated with disability, but knowledge of how these environmental characteristics simultaneously influence older adults' ability to shop independently is limited. We investigated cross-sectional associations between the outdoor home, local neighborhood and macrosocioeconomic levels of the environment and shopping difficulty and interactions between environmental factors and shopping difficulty. Using nationally representative data from a study of Medicare-eligible adults, we conducted a cross-sectional secondary data analysis to examine associations between the environment and difficulty shopping (N = 5504). Sidewalk conditions, broken steps, neighborhood social cohesion and neighborhood socioeconomic disadvantage were associated with more difficulty shopping, although health factors partially accounted for associations between broken steps and disadvantage and shopping difficulty. The association between social cohesion and shopping difficulty also depended on the degree of socioeconomic disadvantage in the neighborhood. Overall, results suggest that factors in the outdoor and local neighborhood environment influence the ability to shop independently for older adults, but that it also may depend on the socioeconomic context of the neighborhood. Interventions aimed at improving the built environment directly outside of older adults' homes and helping increase social cohesion among neighbors, has the potential to reduce difficulty in carrying out this important activity. Implications for rehabilitation Built features of the outdoor home environment including sidewalks and broken steps influence whether older adults are able to safely leave their home to conduct daily activities such as shopping, so it is important that clinicians and rehabilitation professionals are aware of these challenges when helping their patients resume daily activities such as shopping. The physical condition and safety of the immediate

Authorizer Shopping: Lessons from Experience and Ideas for the Future

Science.gov (United States)

Boast, Lyria; Ellison, Shonaka; Hassel, Bryan C.; Conlan, Sean; Rausch, M. Karega

2016-01-01

As charter school authorizers and states have increased performance expectations and grown less hesitant to close failing schools, "authorizer shopping" has emerged as a growing threat to overall charter school quality. Authorizer shopping happens when a charter school chooses or changes its authorizer specifically to avoid…

FME Carpentry Shop Keeps Facility in Good Repair | Poster

Science.gov (United States)

By Peggy Pearl, Contributing Writer Did you know that what most people call the Carpentry Shop at Facilities Maintenance and Engineering (FME) is actually made up of the three crafts, woodcrafting, painting, and locksmithing?  On any given day, throughout the Frederick National Laboratory campus, you may find shop staff utilizing an assortment of tools and a wide range of

PERSEPSI MANFAAT DAN RISIKO DALAM PERILAKU PEMBELIAN KONSUMEN ONLINE SHOP

Directory of Open Access Journals (Sweden)

Lilik Noor Yuliati

2011-08-01

Full Text Available  This study was to analyze lifestyle, perceived risks, perceived benefits, online searching, evaluation of information, and consumer purchasing behavior in online shop. Online shop election conducted purposively, that was facebook, kaskus, and online shop community. The study included 145 consumers. Data analysis was performed by descriptive, different test, and regression test. The results showed that perceived risks, evaluation of information, and online shopping expenditure among groups that worked and didn’t work differ significantly. Consumers had lifestyle in moderate category, perceived risk in risk category, neutral perceived benefits, and low online searching. Perceived benefits was influenced by gender, age, occupation, income, and lifestyle, while the perceived risks was influenced by work and lifestyle. Online search influenced by gender, while evaluation of information was influenced by gender, perceived benefits, and perceived risks. Fashion product buying behavior was influenced by gender, age, occupation, lifestyle, perceived benefits, online searching, and evaluation of information.

The Development and Validation of the Online Shopping Addiction Scale.

Science.gov (United States)

Zhao, Haiyan; Tian, Wei; Xin, Tao

2017-01-01

We report the development and validation of a scale to measure online shopping addiction. Inspired by previous theories and research on behavioral addiction, the Griffiths's widely accepted six-factor component model was referred to and an 18-item scale was constructed, with each component measured by three items. The results of exploratory factor analysis, based on Sample 1 (999 college students) and confirmatory factor analysis, based on Sample 2 (854 college students) showed the Griffiths's substantive six-factor structure underlay the online shopping addiction scale. Cronbach's alpha suggested that the resulting scale was highly reliable. Concurrent validity, based on Sample 3 (328 college students), was also satisfactory as indicated by correlations between the scale and measures of similar constructs. Finally, self-perceived online shopping addiction can be predicted to a relatively high degree. The present 18-item scale is a solid theory-based instrument to empirically measure online shopping addiction and can be used for understanding the phenomena among young adults.

The Development and Validation of the Online Shopping Addiction Scale

Science.gov (United States)

Zhao, Haiyan; Tian, Wei; Xin, Tao

2017-01-01

We report the development and validation of a scale to measure online shopping addiction. Inspired by previous theories and research on behavioral addiction, the Griffiths's widely accepted six-factor component model was referred to and an 18-item scale was constructed, with each component measured by three items. The results of exploratory factor analysis, based on Sample 1 (999 college students) and confirmatory factor analysis, based on Sample 2 (854 college students) showed the Griffiths's substantive six-factor structure underlay the online shopping addiction scale. Cronbach's alpha suggested that the resulting scale was highly reliable. Concurrent validity, based on Sample 3 (328 college students), was also satisfactory as indicated by correlations between the scale and measures of similar constructs. Finally, self-perceived online shopping addiction can be predicted to a relatively high degree. The present 18-item scale is a solid theory-based instrument to empirically measure online shopping addiction and can be used for understanding the phenomena among young adults. PMID:28559864

The Development and Validation of the Online Shopping Addiction Scale

Directory of Open Access Journals (Sweden)

Haiyan Zhao

2017-05-01

Full Text Available We report the development and validation of a scale to measure online shopping addiction. Inspired by previous theories and research on behavioral addiction, the Griffiths's widely accepted six-factor component model was referred to and an 18-item scale was constructed, with each component measured by three items. The results of exploratory factor analysis, based on Sample 1 (999 college students and confirmatory factor analysis, based on Sample 2 (854 college students showed the Griffiths's substantive six-factor structure underlay the online shopping addiction scale. Cronbach's alpha suggested that the resulting scale was highly reliable. Concurrent validity, based on Sample 3 (328 college students, was also satisfactory as indicated by correlations between the scale and measures of similar constructs. Finally, self-perceived online shopping addiction can be predicted to a relatively high degree. The present 18-item scale is a solid theory-based instrument to empirically measure online shopping addiction and can be used for understanding the phenomena among young adults.

Sikap Online Shopping Dan Niat Pencarian Informasi Terhadap Niat Dan Perilaku Belanja

OpenAIRE

Setiowati, Apriliani Kartika; Widayat; Jasly

2012-01-01

This explanatory study aims to test and analyze how respondents attitudes towards online shoppingeffect, information gathering, shopping intention and behavior. To measure the attitudes toward onlineshopping, attributes associated to online shopping are used. Moreover, the websites revisits andshopping intensity through alternative channels are used to measure the behaviour of the respondentsvisiting intensity to shop online. Partial least square are used to analysis primary data attitudestow...

Testing the ghost with the machine

International Nuclear Information System (INIS)

De Zubicaray, G.

2002-01-01

Since its introduction during the 1990s, functional magnetic resonance imaging (fMRI) has been used to investigate brain activity occurring during a bewildering variety of sensory, motor and cognitive tasks. That is, a machine is being used to test 'the ghost in the machine' - the human mind. The use of imaging techniques to investigate these issues has even led to the emergence of a new scientific field called cognitive neuroscience. Currently, there are only a few groups in Australia actively publishing fMRI studies in the international literature, and the majority of these laboratories are clustered on the east coast. My own research with fMRI has focused on areas such as language and memory, with a special interest in how we solve competitive processes in our thinking

The Associations between Yelp Online Reviews and Vape Shops Closing or Remaining Open One Year Later

Science.gov (United States)

Kong, Grace; Unger, Jennifer; Baezconde-Garbanati, Lourdes; Sussman, Steve

2017-01-01

INTRODUCTION Vape shops are popular brick-and-mortar stores that sell e-cigarette products but are not understood well. Previous analysis of Yelp reviews of vape shops located in various ethnic neighborhoods in Los Angeles, California in 2014 identified characteristics of vape shop as delineated by consumers. In this study, we assessed the associations between these characteristics and vape shops going out of business in 2015. METHODS Content analysis of Yelp reviews of 72 vape shops in 2014 identified 1) general characteristics of the reviews/reviewers, 2) vape shop, staff, and marketing attributes, 3) physical environment, and 4) health claims. In 2015, in-person visits confirmed that 22% of these vape shops closed permanently. We analyzed whether characteristics/attributes identified in 2014 associated with stores remaining open (n = 56) or permanently closing (n = 16) in 2015. RESULTS Univariate findings showed that open vape shops relative to closed shops had greater 1) number of reviews, 2) rebuilds/fixings, 3) ratings of staff attributes as “helpful/patient/respectful,” and 4) report of the physical environment as “bar type.” CONCLUSIONS Bar type vape shops and those with rebuilding/fixing capabilities were associated with staying open, suggesting the popularity of these attributes. Yelp consumer reviews is a useful research tool to identify consumer-determined important sustaining attributes of vape shops and may be used to identify aspects of enduring shops that need regulations. PMID:29057379

Strengthening Community-University Research Partnerships: Science Shops in the Netherlands

NARCIS (Netherlands)

Mulder, Henk; Straver, Gerard; Hall, Budd; Tandon, Rajesh; Tremblay, Crystal

2015-01-01

Although they have been around for a long time already, the Science Shop approach is still seen as innovative in bridging the gap between science and civil society. The Dutch Science Shops are often taken as an example for similar activities abroad, and receive much support from the European

Mall shopping preferences and patronage of mature shoppers

Directory of Open Access Journals (Sweden)

Gabriel G. Rousseau

2014-04-01

Research purpose: The purpose of this study was to investigate the buying behaviour of mature consumers (older than 55 in Port Elizabeth shopping malls. Motivation for the study: The perception of mature shoppers as old people with limited financial resources is untrue. This study investigates the behaviours of mature shoppers. Research design, approach and method: A model guided the investigation. The authors facilitated four focus groups to gain insight into mature consumers’ buying behaviours. A field survey followed with a sample of mall shoppers (n = 680. The authors performed content analysis of the focus group material and used SPSS and AMOS programs to analyse the data quantitatively. Main findings: Focus group interviews revealed specific buying behaviours of mature shoppers. The survey showed significant relationships between various determinants that influence respondents’ buying behaviours with adequate model fit indices. These results confirmed the convergent and discriminant validity of the model that comprises mall shopping anticipation, experience and patronage. Practical/managerial implications: Mature shoppers’ expectations exceeded their experiences, suggesting dissatisfaction with some aspects of their experiences. Retailers and shopping mall managers need to redesign malls if they wish to cater for the segment of ageing shoppers and their spending power. Contribution/value-add: The study contributes to the research available in South Africa on service at shopping malls that cater for mature consumers.

Shopping behavior for ADHD drugs: results of a cohort study in a pharmacy database.

Science.gov (United States)

Cepeda, M Soledad; Fife, Daniel; Berwaerts, Joris; Yuan, Yingli; Mastrogiovanni, Greg

2014-09-01

Attention-deficit hyperactivity disorder (ADHD) medications are subject to abuse, misuse, and diversion. Obtaining ADHD prescriptions from multiple prescribers or filled across multiple pharmacies, known as 'doctor shopping', may reflect such unsanctioned use. We sought to create a definition of shopping behavior that differentiated ADHD medications from medications with low risk of diversion, i.e. asthma medications, and describe the incidence, frequency, and demography of shopping behavior. This was a retrospective cohort study in a pharmacy database-LRx-covering 65 % of US retail pharmacies. Subjects had ADHD or asthma medication dispensed between February 2011 and January 2012. We followed subjects for 18 months to assess the number with overlapping dispensings from different prescribers, and the number of prescribers and pharmacies involved in those dispensings. We included 4,402,464 subjects who were dispensed ADHD medications, and 6,128,025 subjects who were dispensed asthma medications. Overlapping prescriptions from two or more prescribers dispensed by three or more pharmacies was four times more frequent in the ADHD cohort than in the asthma cohort. Using this definition, ADHD medication shopping behavior was more common among experienced users than naïve users, and was most common in subjects aged 10-39 years. Among subjects who shopped, 57.4 % shopped only once (accounting for 22.4 % of episodes), and 9.2 % shopped six or more times (accounting for 42.0 % of episodes). Shoppers more often received stimulant ADHD drugs than non-stimulants. Overlapping prescriptions by different prescribers and filled at three or more pharmacies defines ADHD medication shopping. Shopping behavior is most common in adolescents and younger adults. A small proportion of shoppers is responsible for a large number of shopping episodes.

Tightening the Dutch coffee shop policy: Evaluation of the private club and the residence criterion.

Science.gov (United States)

van Ooyen-Houben, Marianne M J; Bieleman, Bert; Korf, Dirk J

2016-05-01

The Dutch coffee shop policy was tightened in 2012. Two additional criteria that coffee shops must adhere to in order for them to be tolerated came into force: the private club and the residence criterion. Coffee shops were only permitted to give access to members and only residents of the Netherlands were permitted to become a member. This tightened policy sought to make coffee shops smaller and more controllable, to reduce the nuisance associated with coffee shops and to reduce the number of foreign visitors attracted by the coffee shops. Enforcement began in the southern provinces. The private club criterion was abolished at the end of 2012. A sample of fourteen municipalities with coffee shops was drawn. Seven in the south were treated as an 'experimental group' and the others as 'comparison group'. A baseline assessment and follow-ups at six and 18 months were performed. A combination of methods was applied: interviews with local experts, surveys with neighbourhood residents, coffee shop visitors and cannabis users, and ethnographic field work. Drugs tourism to coffee shops swiftly declined in 2012. The coffee shops also lost a large portion of their local customers, since users did not want to register as a member. The illegal market expanded. Neighbourhood residents experienced a greater amount of nuisance caused by dealer activities. After abolishment of the private club criterion, residents of the Netherlands largely returned to the coffee shops. Drug tourists still remained largely absent. Neighbourhood residents experienced more nuisance from coffee shops again. Illegal cannabis sale was tempered. No effect on cannabis use was found. The quick and robust shifts in the users' market in reaction to the policy changes illustrate the power of policy, but also the limitations caused by the dynamic and resilient nature of the Dutch cannabis supply market. Copyright © 2016 Elsevier B.V. All rights reserved.

Shopping for a safer car

Science.gov (United States)

2010-01-01

This brochure provides some helpful tips on what to look for when shopping for a safer car. Automakers are increasingly advertising the safety features of their cars. The problem is sorting out their claims and zeroing in on the safety features that ...

Preferences of men and women in the Czech Republic when shopping for food

Directory of Open Access Journals (Sweden)

Jana Turčínková

2012-01-01

Full Text Available Buying behavior of men and women shows considerable differences. The individual stages of purchase decision-making process lead to convergence or conversely deepening of these differences. The paper provides results of analysis of chosen aspects of consumer behavior of men and women in the Czech Republic. It focuses on the grocery shopping in small-sized shops. Due to the complexity of the problem the research could not cover all aspects associated with this topic. It identifies who in a household is responsible for grocery shopping, how often and in what quantity of purchases. The paper examines to what extent is a purchase planned and by what a consumer is usually stimulated to an impulsive shopping. Further, it describes factors leading to a choice of shopping place and to a satisfaction with shopping conditions. The primary data was collected through a method of in-depth interviews conducted from January to March 2011 on a sample of 56 respondents in the three smaller stores in the Moravské Budějovice, and via questionnaire survey which took place in all regions of the Czech Republic (n = 5809 among respondents aged 12+. The results confirmed we can observe differences in shopping behavior of women and man, even though the importance of various factors taken into account when making a choice of a particular food product show significant differences from the gender perspective (none of the analyzed factors was found to have higher statistical significance than weak, p < .05. The qualitative research, however, revealed that women tend to make more frequent purchases and keep a certain level of supplies at home, while men tend to leave shopping till it becomes necessary, they are more likely to stick to their shopping list and more loyal to their favorite products. Women are more flexible when in need to replace a missing product with its substitute. The proportion of impulsively purchased items in a shopping basket is higher for women than

Driving online shopping: Spending and behavioral differences among women in Saudi Arabia

Directory of Open Access Journals (Sweden)

Al-maghrabi, T.

2010-01-01

Full Text Available This study proposes a revised technology acceptance model that integrates expectation confirmation theory to measure gender differences with regard to continuance online shopping intentions in Saudi Arabia. The sample consists of 650 female respondents. A structural equation model confirms model fit. Perceived enjoyment, usefulness, and subjective norms are determinants of online shopping continuance in Saudi Arabia. High and low online spenders among women in Saudi Arabia are equivalent. The structural weights are also largely equivalent, but the regression paths from perceived site quality to perceived usefulness is not invariant between high and low e-shoppers in Saudi Arabia. This research moves beyond online shopping intentions and includes factors affecting online shopping continuance. The research model explains 60% of the female respondents’ intention to continue shopping online. Online strategies cannot ignore either the direct and indirect spending differences on continuance intentions, and the model can be generalized across Saudi Arabia.

Generation Y: Online Shopping Behaviour of the Secondary School and University Students

Directory of Open Access Journals (Sweden)

Petra Krbová

2015-01-01

Full Text Available This paper presents the results of primary research which was focused on specifics of online shopping in the segment of secondary school and university students. This segment is a part of one generational cohort – Generation Y which has its own specifics and characteristics. The main objective is to describe some aspects of shopping orientations of this segment, especially in the online environment. The research results show that young Generation Y individuals prefer online sources of information, mainly price comparison website Heureka.cz and online shop websites. The significant others (family, friends, etc. are the third most used source of information and the first personal one. When they choose online retailer they mostly take notice of the quality of information about products and the reviews of former customers and online shop comments. As the best benefit online shop can offer they regard short time benefits as a free delivery and a gift to an order.

New learning arenas for shop stewards - a new political agenda for unions

DEFF Research Database (Denmark)

Warring, Niels

. In the paper I will discuss results from a project involving shop stewards from four different unions, all members of LO (the confederation of trade unions for skilled and unskilled workers). We worked with different methods in the project ending with ‘future-creating workshops' where shop stewards...... in daily practices can be analysed us a combination of perspectives from different theoretical traditions. Shop steward's learning is situational, relational and cross-contextual. Shop stewards' learning is lifelong and life wide. And shop stewards' learning is closely connected to the development...... of the labour market and not least the unions' priorities, interpretation and reaction to this development....

Personality Traits as Predictors of Shopping Motivations and Behaviors: A Canonical Correlation Analysis

Directory of Open Access Journals (Sweden)

Ali Gohary

2014-10-01

Full Text Available This study examines the relationship between Big Five personality traits with shopping motivation variables consisting of compulsive and impulsive buying, hedonic and utilitarian shopping values. Two hundred forty seven college students were recruited to participate in this research. Bivariate correlation demonstrates an overlap between personality traits; consequently, canonical correlation was performed to prevent this phenomenon. The results of multiple regression analysis suggested conscientiousness, neuroticism and openness as predictors of compulsive buying, impulsive buying and utilitarian shopping values. In addition, the results showed significant differences between males and females on conscientiousness, neuroticism, openness, compulsive buying and hedonic shopping value. Besides, using hierarchical regression analysis, we examined sex as moderator between Big Five personality traits and shopping variables, but we didn’t find sufficient evidence to prove it.

CERN Shop - Christmas Sale on 13 and 14 December

CERN Multimedia

2006-01-01

Looking for Christmas present ideas? As every year, we will be running a CERN Shop Stand in the Main Building, ground floor, on Wednesday 13 and on Thursday 14 December from 10.30 to 16.00. Some new articles will be on sale and special reductions are given for some articles. Come and visit the CERN Shop Stand and find your Christmas presents. DSU-CO group

Pengaruh Elemen Desain Interior Terhadap Persepsi Maskulinitas (Studi Kasus: Barber Shop

Directory of Open Access Journals (Sweden)

Ardiles Septuaginta Sopakuwa

2016-07-01

Full Text Available Barber shop merupakan ruang publik yang masih belum diinfiltrasi oleh wanita dan diperuntukkan bagi pria saja, maka barber shop dianggap cocok untuk menjadi representasi ruang publik khusus pria. Penelitian ini berupaya mencari tahu dampak dari elemen lingkungan interior terhadap persepsi maskulin, sehingga ruang-ruang publik khusus pria yang ada saat ini dapat secara optimal memenuhi kebutuhan persepsi maskulin. Penelitian ini menggunakan stimulus visual berupa desain tiga dimensional dari lima kondisi barber shop yang merupakan manipulasi kombinasi variabel bebas berupa warna biru (A1 dan jingga (A2, serta material concrete (B1 dan kayu (B2. Kombinasi warna dan material ini menghasilkan empat kondisi eksperimental, dan  satu kondisi kontrol tanpa elemen warna maupun material experimental yang diterapkan. Eksperimen dilakukan terhadap 30 orang responden yang merupakan pelanggan barber shop untuk memberikan respon persepsi, emosi, dan sikap terhadap 5 buah stimulus visual yang menggambarkan kondisi barber shop. Data yang didapatkan dianalisa dengan metode ANOVA dan menunjukkan bahwa perbedaan respon terhadap keempat kondisi eksperimental tidak signifikan. Kondisi yang dipersepsi paling positif memiliki setidaknya satu elemen interior maskulin. Sementara kondisi yang dinilai paling mendukung emosi positif tidak menerapkan satu elemen interior maskulin pun. Sehingga menarik untuk menilai lebih jauh dampak kombinasi elemen interior ini terhadap respon responden. Kata Kunci: barber shop; desain eksperimental; emosi positif; persepsi maskulinitas; sikap positif.Influence of Interior Design Elements in Perception of Masculinity (Case Study: Barber ShopThe barber shop is one of the few public spaces that are not infiltrated by women. Therefore, the barber shop is a good representative of a male-only public space. This research was aimed at finding out the effect of interior-environment elements towards a masculine perception, so that current male

Social movements and their knowledge needs – the experience from European Science Shops

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard

Definition of science shop: research support to civil society Cases from the Netherlands and Denmark Topics in the lecture: The international network of Science Shops – an invitation An overview of health related projects Community-based research in Europe A mutual relationship between civil...... society and university? How to consider the need for Science Shops?...

Design and Testing of an Air Force Services Mystery Shopping Program

National Research Council Canada - National Science Library

Hall, Justin

1998-01-01

.... Background The use of mystery shoppers to evaluate customer service experiences is widely used in commercial foodservice and hotel industries. Many companies "shop" their properties with inhouse programs while others contract an independent company to perform the shopping.

Shop that has a face; Kao wo motta tenpo (kanto interview)

Energy Technology Data Exchange (ETDEWEB)

Goto, S.; Izuchi, T.

2000-03-10

This paper describes an opinion by the president of the Japan Franchise Chain (FC) Association. The FC Association is now thinking of two targets to be realized. One is the structuring of accurate database. While there are about 200 FC shops joining as the member of the Association, the total number of chain shops that introduce actually themselves as the FC shop is regarded to exceed one thousand. The president hopes that the database would cover as wide area as it can replace the registration system. He also hopes to publicize the FC system by putting it on home-page that may result in membership expansion and information disclosure. Another target is to support starting the FC business and increase chances of matching the franchiser with franchisees. Convenience stores have tried to expand merchandise line-up based on POS information and rationalized the shop management until today. From now on, it is wanted that they become 'shops that have a face' in their respective regions, while using the rationality of the standardization more effectively. This should result in increasing the strength of the franchiser. (NEDO)

The households purchase behavior and visitors shopping – amusing centre Olympia

Directory of Open Access Journals (Sweden)

Miroslav Foret

2006-01-01

Full Text Available The first part of the paper is devoted to the problems of the households purchase behavior in the Czech Republic. The main part is based on own empirical results from own marketing research conducted in 2005–2006. The results concerns on influences of food-stuffs purchases, clothes and shoes purchases, household equipments purchases and differences among them. In the second part is presented increasing number of shopping – amusing centres in the Czech Republic. These trends are changing purchase behavior our consumers. In Spring 2006 was conducted own marketing research of visitors shopping – amusing centre Olympia in Brno Modřice. Some more detail results give their basic sociodemographic characteristics as well as shopping orientations. The purchase in the shopping – amusing centres is a part of the contemporary life style, leisure and amusement.

Risk factors associated with purchasing pesticide from shops for self-poisoning

DEFF Research Database (Denmark)

Weerasinghe, Manjula; Konradsen, Flemming; Eddleston, Michael

2015-01-01

of individuals who purchase pesticides directly from shops and how they differ from individuals who access pesticides from other sources such as home, home garden or farmland. This information will help inform possible vendor/shop-based intervention strategies aimed at reducing access to pesticides used for self-harm......INTRODUCTION: Pesticide self-poisoning is one of the most frequently used methods of suicide worldwide, killing over 300,000 people annually. Around 15-20% of pesticide self-poisonings occur soon after the person has bought the pesticide from a shop. We aim to determine the characteristics....... METHODS AND ANALYSIS: This study will investigate risk factors associated with purchasing pesticides for acts of self-poisoning from pesticide shops, including cases identified over a 9-month period using a population-based case-control group approach. Four interviewer-administered data collection tools...

Consumer Preferences Expressed via Shopping in Alternative Food Chains

Directory of Open Access Journals (Sweden)

Simona Miškolci

2017-01-01

Full Text Available In recent years an increasing consumer interest in shopping in alternative food chains can be observed also in the Czech Republic. For the successful development of alternative food networks, it is important to understand what motivates consumers to shop there. This paper is aimed to define and discuss the key aspects of the preference determinants of AFN shoppers. The empirical analysis was conducted on 333 shoppers at two alternative food chains in Brno, Czech Republic. The consumer survey was designed to examine cognitive, normative and affective determinants of preference for purchased food. First findings confirm, that by the shopping at alternative food chains consumers demonstrate preferences not only for fresh and tasty food, but also their normative position of willingness to support local production and community.

A study of the potential of grocery shopping on the Internet

DEFF Research Database (Denmark)

Ramus, Kim Bjarne

for online grocery shopping. It builds the model on 2 components, intention formation (which is basically the TPB) and a learning component. 614 respondents in Denmark participated in the study. The results show that Perceived Behavioral Control has little influence on the intention to buy grocery products......Internet shopping is a rapid growing form of shopping. A variety of studies have tried to profile shoppers on the Internet, but little effort has been done to provide a theoretical foundation for the research. This paper uses the Theory of Planned Behavior (TPB) to investigate the potential...

A study of the potential of grocery shopping on the Internet

DEFF Research Database (Denmark)

Ramus, Kim Bjarne; Grunert, Klaus G.

Internet shopping is a rapid growing form of shopping. A variety of studies have tried to profile shoppers on the Internet, but little effort has been done to provide a theoretical foundation for the research. This paper uses the Theory of Planned Behavior (TPB) to investigate the potential...... for online grocery shopping. It builds the model on 2 components, intention formation (which is basically the TPB) and a learning component. 614 respondents in Denmark participated in the study. The results show that Perceived Behavioral Control has little influence on the intention to buy grocery products...

Deregulation of shopping hours: The impact on independent retailers and chain stores

OpenAIRE

Wenzel, Tobias

2010-01-01

This paper studies shopping hour decisions by retail chains and independent competitors. We use a Salop-type model where retailers compete in prices and shopping hours. Our results depend significantly on efficiency differences between retail chain and independent retailer. If the efficiency difference is small, the independent retailer may choose longer shopping hours than the retail chain and may gain from deregulation at the expense of the retail chain. The opposite result emerges when the...

Relevance of air conditioning for 222Radon concentration in shops of the Savona Province, Italy

International Nuclear Information System (INIS)

Panatto, Donatella; Ferrari, Paola; Lai, Piero; Gallelli, Giovanni

2006-01-01

Radon ( 222 Rn) concentration was evaluated in shops of the Savona Province, Italy, between summer 2002 and winter 2002-2003. The main characteristics of each shops were recorded through a questionnaire investigating the ventilation rate and factors related to 222 Rn precursors in the soil and the construction materials. The main variables that were related to radon concentration were the following: age of the building, level of the shop above ground, season of the year, wind exposure, active windows, and type of heating system. Shops equipped with individual air heating/conditioning systems exhibited radon concentrations that were three times higher than those of shops heated by centralized furnaces. Our data indicate that the level of pollution in the shops was of medium level, with an expected low impact on the salespersons' health. Only in wintertime, the action level of 200 Bq m -3 for the confined environment was reached in 10 shops equipped with individual air heating/conditioning systems

The Virtual Shopping Aisle: More or Less Work?

Science.gov (United States)

Oliver, Dave; Livermore, Celia Romm

This chapter explores Internet-based grocery shopping. A review of self-service and associated technologies is followed by a discussion of the three main styles of grocery shopping: over-the-counter, self-service and online. The chapter focuses on the distribution of work between the supplier and the customer in each of these modes. We observe some features of the self-service phenomenon which question prevailing assumptions about self-service activities, namely that they replace work done by employees with work done by customers.

Upgrade of the synchronous data management system of the EAST poloidal field power supply

Energy Technology Data Exchange (ETDEWEB)

Zhu, Lili; Huang, Liansheng, E-mail: huangls@ipp.ac.cn; Fu, Peng; Gao, Ge; He, Shiying

2016-11-15

Highlights: • The upgraded synchronous data management system of EAST poloidal field power supply supports long-pulse data storage. • Slice storage mechanism on MDSplus has been adopted for quasi real-time data storage. • The state machine has been adopted for managing the system sequencer. • IEEE-1588 protocol via Ethernet for the synchronization of clock signal was detailed described. - Abstract: Poloidal field (PF) power supply is an important subsystem of the Experimental Advanced Superconducting Tokamak (EAST). The upgrade of the PF control system of EAST is a great improvement over the original data management system which could not meet the requirements necessary for experiments on synchronization, modularity and sampling rate. In order to better analyze the power operation performance, the Synchronization Data Management System (SDMS) needs to be upgraded as well. This upgrade is based on distributed data acquisition and an MDSPLUS database. It consists of three data acquisition nodes synchronized by an reference clock from the EAST central timing system that also provides the start trigger of the EAST pulse. After being processed by a signal conditioning unit, experimental signals are digitized and written into the database in MDSPLUS format. Multi-channel, multi-tasking and continuous data storage have been achieved by using multi-threading technology on a Linux operation system. The SDMS has been used on the server in PF control system for the entire 2015 EAST campaign. The SDMS has had good performance during experiments and convenient human-machine interface to satisfy the requirements of all the experiments.

Upgrade of the synchronous data management system of the EAST poloidal field power supply

International Nuclear Information System (INIS)

Zhu, Lili; Huang, Liansheng; Fu, Peng; Gao, Ge; He, Shiying

2016-01-01

Highlights: • The upgraded synchronous data management system of EAST poloidal field power supply supports long-pulse data storage. • Slice storage mechanism on MDSplus has been adopted for quasi real-time data storage. • The state machine has been adopted for managing the system sequencer. • IEEE-1588 protocol via Ethernet for the synchronization of clock signal was detailed described. - Abstract: Poloidal field (PF) power supply is an important subsystem of the Experimental Advanced Superconducting Tokamak (EAST). The upgrade of the PF control system of EAST is a great improvement over the original data management system which could not meet the requirements necessary for experiments on synchronization, modularity and sampling rate. In order to better analyze the power operation performance, the Synchronization Data Management System (SDMS) needs to be upgraded as well. This upgrade is based on distributed data acquisition and an MDSPLUS database. It consists of three data acquisition nodes synchronized by an reference clock from the EAST central timing system that also provides the start trigger of the EAST pulse. After being processed by a signal conditioning unit, experimental signals are digitized and written into the database in MDSPLUS format. Multi-channel, multi-tasking and continuous data storage have been achieved by using multi-threading technology on a Linux operation system. The SDMS has been used on the server in PF control system for the entire 2015 EAST campaign. The SDMS has had good performance during experiments and convenient human-machine interface to satisfy the requirements of all the experiments.

The Virtual Shopping Experience: using virtual presence to motivate online shopping

OpenAIRE

Carolyn Chin; Paula Swatman; Paula Swatman

2005-01-01

Online shopping has thus far tended to be a niche business – highly successful in selling digital products such as shares, software and, increasingly, music and films, it has been less successful in persuading the purchasers of ‘traditional’ goods such as cars, clothes, toiletries, or household appliances to forsake their physical retailers and move into cyberspace. In this wide-ranging review paper we investigate the issue of the virtual experience – endeavouring to understand what is nee...

Rehabilitation in the real-life environment of a shopping mall.

Science.gov (United States)

Labbé, Delphine; Poldma, Tiiu; Fichten, Catherine; Havel, Alice; Kehayia, Eva; Mazer, Barbara; McKinley, Patricia; Rochette, Annie; Swaine, Bonnie

2018-04-01

The aim of this study was to explore how shopping malls could be used during rehabilitation and to identify the facilitators and barriers to their use. Two focus groups, conducted with 15 rehabilitation professionals from various disciplines and working with people with disabilities of all ages were structured around two topics: (i) The usage of malls for rehabilitation and (ii) Factors that facilitate or limit rehabilitation professionals' use of the mall as an environment for clinical assessment and/or intervention. The thematic analysis revealed that shopping malls were used to achieve several rehabilitation goals targeting physical and cognitive skills, psychological health and socialization. This real-life environment is motivating and helps foster independence and normalization. Factors affecting mall use during rehabilitation included personal factors (e.g. clients' personality and level of readiness) and environmental factors (e.g. clinical context, accessibility of the mall and social attitudes of store owners). Shopping malls may be a relevant rehabilitation assessment and treatment environment that could contribute to optimizing community integration of people with disabilities. Implications for rehabilitation To ensure successful community reintegration, clients could be trained at some point during their rehabilitation, to perform activities in real-life settings, such as a shopping mall. Shopping malls appear to enable the attainment of rehabilitation goals targeting a variety of skills. This real-life environment appears to be motivating and helps foster independence and normalization. Factors felt to affect mall use during rehabilitation include personal factors (e.g. clients' personality and level of readiness) and environmental factors (e.g. clinical context, accessibility of the mall and social attitudes of store owners). The shopping mall may be an untapped resource as it appears to be a relevant rehabilitation assessment and treatment

Present Food Shopping Habits in the Spanish Adult Population: A Cross-Sectional Study

Directory of Open Access Journals (Sweden)

María Achón

2017-05-01

Full Text Available Information on grocery shopping patterns is one key to understanding dietary changes in recent years in Spain. This report presents an overview of Spanish food shopping patterns in the adult population. A cross-sectional, nationally representative telephone survey was conducted in Spain. Individuals were asked about food shopping responsibility roles, types of visited food stores, time spent, additional behaviors while shopping, the influence of marketing/advertising and, in particular, fresh produce shopping profile. Binary logistic regression models were developed. The final random sample included 2026 respondents aged ≥18 years, of which 1223 were women and 803 were men. Women reported being in charge of most of the food shopping activities. Looking for best prices, more than looking for healthy or sustainable foods, seemed to be a general behavior. Supermarkets were the preferred retail spaces for food price consideration, convenience, variety and availability. Fresh produce shopping was associated with traditional markets and neighborhood stores in terms of reliance and personalized service. It is essential to highlight the importance of the role played by women. They are the main supporters concerned in preserving adequate dietary habits. Economic factors, more than health or food sustainability, are commonly considered by the population. Traditional markets may play an important role in preserving some healthy dietary habits of the Mediterranean food culture in Spain.

Present Food Shopping Habits in the Spanish Adult Population: A Cross-Sectional Study.

Science.gov (United States)

Achón, María; Serrano, María; García-González, Ángela; Alonso-Aperte, Elena; Varela-Moreiras, Gregorio

2017-05-18

Information on grocery shopping patterns is one key to understanding dietary changes in recent years in Spain. This report presents an overview of Spanish food shopping patterns in the adult population. A cross-sectional, nationally representative telephone survey was conducted in Spain. Individuals were asked about food shopping responsibility roles, types of visited food stores, time spent, additional behaviors while shopping, the influence of marketing/advertising and, in particular, fresh produce shopping profile. Binary logistic regression models were developed. The final random sample included 2026 respondents aged ≥18 years, of which 1223 were women and 803 were men. Women reported being in charge of most of the food shopping activities. Looking for best prices, more than looking for healthy or sustainable foods, seemed to be a general behavior. Supermarkets were the preferred retail spaces for food price consideration, convenience, variety and availability. Fresh produce shopping was associated with traditional markets and neighborhood stores in terms of reliance and personalized service. It is essential to highlight the importance of the role played by women. They are the main supporters concerned in preserving adequate dietary habits. Economic factors, more than health or food sustainability, are commonly considered by the population. Traditional markets may play an important role in preserving some healthy dietary habits of the Mediterranean food culture in Spain.

The Application of Data Mining Techniques to Create Promotion Strategy for Mobile Phone Shop

Science.gov (United States)

Khasanah, A. U.; Wibowo, K. S.; Dewantoro, H. F.

2017-12-01

The number of mobile shop is growing very fast in various regions in Indonesia including in Yogyakarta due to the increasing demand of mobile phone. This fact leads high competition among the mobile phone shops. In these conditions the mobile phone shop should have a good promotion strategy in order to survive in competition, especially for a small mobile phone shop. To create attractive promotion strategy, the companies/shops should know their customer segmentation and the buying pattern of their target market. These kind of analysis can be done using Data mining technique. This study aims to segment customer using Agglomerative Hierarchical Clustering and know customer buying pattern using Association Rule Mining. This result conducted in a mobile shop in Sleman Yogyakarta. The clustering result shows that the biggest customer segment of the shop was male university student who come on weekend and from association rule mining, it can be concluded that tempered glass and smart phone “x” as well as action camera and waterproof monopod and power bank have strong relationship. This results that used to create promotion strategies which are presented in the end of the study.

Examining Online Shopping Services in Relation to Experience and Frequency of Using Internet Retailing

OpenAIRE

Alin OPREANA

2013-01-01

E-shopping has the potential to replace traditional in-store shopping. It is well perceived that information and communication technologies have great impacts on modern society - they are changing how and where we work, shop, and in general terms how we live our lives. In this study, we use a survey instrument to examine the association between experience level with Internet and e-shopping and consumers’ frequency of online purchasing, while considering sex as a passive influencer. We study t...

PaintShop Pro X4 for photographers

CERN Document Server

McMahon, Ken

2012-01-01

Great for those new to PaintShop Pro or digital imaging in general, this book is packed with inspirational, full-color images and easy to follow, step-by-step projects that will have you producing great images in PaintShop Pro in no time! Everything you need to turn your photos into stunning works of art is right here in this Corel-reviewed guide. In this new edition, Ken covers new features including how to make the most of the newly organized workspaces, use the redesigned HDR tool, and instantly publish photos on Flickr and Facebook. Squeeze every ounce of detail out of RAW files using the

PaintShop Pro x6 for photographers

CERN Document Server

McMahon, Ken

2014-01-01

Written for photographers of all levels, PaintShop Pro X6 for Photographers is packed with inspirational, full-color images and easy-to-follow step-by-step projects that will have you producing great images in PaintShop Pro in no time! Everything you need to enhance and improve your digital photography is right here in this Corel® endorsed guide.In this new edition, Ken McMahon looks at the pros and cons of the new, faster 64-bit version of the software and covers new features, including working with the Instant Effects palette, using the Smart selection brush, mapping photos, automatically ta

Critical Success Factors of Internet Shopping: The Case of Japan

Science.gov (United States)

Atchariyachanvanich, Kanokwan; Okada, Hitoshi; Sonehara, Noboru

This paper presents the results from a study conducted on the effect of differing factors on a customer's attitude towards using Internet shopping in Japan. The research model used was an extended version of the consumers' acceptance of virtual stores model with the addition of a new factor, need specificity, and a grouping of critical success factors based on their customer-centric and website-centric viewpoints sources. It examines how differences in the individual characteristics of customers affect the actual use of Internet shopping. According to an online questionnaire filled out by 1,215 online customers used to conduct a multiple regression analysis and a structural equation modeling analysis, the participant's gender, education level, innovativeness, net-orientation, and need specificity, which are the factors for the customer-centric viewpoints, have a positive impact on the actual use of Internet shopping. The implication also shows that Japanese online customers do not worry about the quality of service of Internet shopping, a factor in the website-centric viewpoint, as significantly as offline customers do.

English in the Garment Shops.

Science.gov (United States)

Verplaetse, Lorrie

This text for limited-English-speaking workers in the garment industry consits of illustrated vocabulary words, grammar lessons, narratives or brief readings, and exercises on employment-related topics. The first section focuses on shop talk, including job-specific vocabulary, simple expressions and explanations, social language, seeking and…

Work-organisational and personal factors associated with upper body musculoskeletal disorders among sewing machine operators.

Science.gov (United States)

Wang, P-C; Rempel, D M; Harrison, R J; Chan, J; Ritz, B R

2007-12-01

To assess the contribution of work-organisational and personal factors to the prevalence of work-related musculoskeletal disorders (WMSDs) among garment workers in Los Angeles. This is a cross-sectional study of self-reported musculoskeletal symptoms among 520 sewing machine operators from 13 garment industry sewing shops. Detailed information on work-organisational factors, personal factors, and musculoskeletal symptoms were obtained in face-to-face interviews. The outcome of interest, upper body WMSD, was defined as a worker experiencing moderate or severe musculoskeletal pain. Unconditional logistic regression models were adopted to assess the association between both work-organisational factors and personal factors and the prevalence of musculoskeletal pain. The prevalence of moderate or severe musculoskeletal pain in the neck/shoulder region was 24% and for distal upper extremity it was 16%. Elevated prevalence of upper body pain was associated with age less than 30 years, female gender, Hispanic ethnicity, being single, having a diagnosis of a MSD or a systemic illness, working more than 10 years as a sewing machine operator, using a single sewing machine, work in large shops, higher work-rest ratios, high physical exertion, high physical isometric loads, high job demand, and low job satisfaction. Work-organisational and personal factors were associated with increased prevalence of moderate or severe upper body musculoskeletal pain among garment workers. Owners of sewing companies may be able to reduce or prevent WMSDs among employees by adopting rotations between different types of workstations thus increasing task variety; by either shortening work periods or increasing rest periods to reduce the work-rest ratio; and by improving the work-organisation to control psychosocial stressors. The findings may guide prevention efforts in the garment sector and have important public health implications for this workforce of largely immigrant labourers.

Espaço Público e Shopping Center na Cidade Contemporânea: Novos Significados do North Shopping em Fortaleza - CE

Directory of Open Access Journals (Sweden)

Tiago Estevam Gonçalves

2012-03-01

Full Text Available Iniciar uma reflexão acerca da cidade atual nos remete à necessidade de construirmos uma análise sobre os shopping centers como espaços que tem atraído um fluxo considerável da população, ocasionando mudanças na relação dos citadinos com os espaços públicos. Nesta perspectiva, temos como objetivo analisar o North Shopping, localizado na cidade de Fortaleza, como um espaço de uso popular onde as camadas de menor poder aquisitivo podem adentrar e usufruir de seus atributos. Imbuídos de tal finalidade nosso aporte teórico fundamentou-se em Pintaudi (1992, Dantas (1995, Silva (1996 Lefebvre (1999, Carlos (2001, Gomes (2002 e Serpa (2007. Conclui-se que na cidade de Fortaleza, o North Shopping é um verdadeiro simulacro da realidade, substituindo as experiências cotidianas dos espaços públicos, configurando-se, assim, a supervalorização do espaço privado que se traveste de público tendo repercussões na nova urbanidade fortalezense.

Advances in Online Shopping Interfaces: Product Catalog Maps and Recommender Systems

NARCIS (Netherlands)

M. Kagie (Martijn)

2010-01-01

textabstractOver the past two decades the internet has rapidly become an important medium to retrieve information, maintain social contacts, and to do online shopping. The latter has some important advantages over traditional shopping. Products are often cheaper on the internet, internet companies

Developing a new Internet grocery retail shop concept for the Indian customers

OpenAIRE

Belkud, Ravikiran

2013-01-01

The main purpose of the thesis is to develop a new Internet grocery retail shop concept for Indian customers in the capital region of Finland. The aim is to understand the various factors to be considered when setting up an Internet grocery retail shop. The thesis report consists of an introduction, and chapters describing the theoretical framework, benchmarking, collection and analysis of empirical data and implementation details of the Internet grocery retail shop. The theoretical frame...

Rehabilitation strategies enhancing participation in shopping malls for persons living with a disability.

Science.gov (United States)

Alary Gauvreau, Christine; Kairy, Dahlia; Mazer, Barbara; Guindon, Andréanne; Le Dorze, Guylaine

2018-04-01

After rehabilitation, it is not clear the extent to which persons living with a disability return to their former activities in the community, such as going to shopping malls. Rehabilitation professionals are faced with the challenge to adequately prepare their clients to resume community participation. The purpose of this study was to identify rehabilitation strategies aimed at preparing clients to engage in activities in shopping malls. Twenty-two participants including 16 rehabilitation clinicians and 6 persons living with a disability participated in four nominal group sessions. Participants were questioned on current or potential rehabilitation strategies carried out to enhance participation in shopping malls for persons living with a disability. Discussions were audio-recorded and qualitative content analysis was conducted. Participants mentioned strategies that were either carried out by the clinician, or in collaboration with other parties. The latter type of strategies was either carried out with the collaboration of the client, the interdisciplinary team, the relatives, or community organizations. Rehabilitation clinicians have a role to play in preparing persons living with a disability to resume activities in a shopping mall. Additionally, therapeutic interventions in community settings may enhance the participation of rehabilitation clients in their everyday activities. Implications for rehabilitation Many strategies are currently used in rehabilitation to prepare persons living with a disability to resume shopping activities. Clinicians could implement shopping-oriented rehabilitation strategies with the client and/or with other rehabilitation partners. Involving clients in activities related to shopping might enhance their participation in shopping malls after rehabilitation. Rehabilitation clinicians can be facilitators for people living with a disability to reach optimal participation.

Teens: Want a Brighter Smile? Visit the Dentist, Not the Shopping Mall

Science.gov (United States)

... a Brighter Smile? Visit the Dentist, not the Shopping Mall Article Chapters Teens: Want a Brighter Smile? Visit the Dentist, not the Shopping Mall print full article print this chapter email this ...

The Holy Trinity of Modernity : Leisure, Suburbia and the Shopping Centre

NARCIS (Netherlands)

Gosseye, J.

2014-01-01

Writing about leisure in suburbia would be neigh impossible without including shopping centres. Leisure, suburbia and shopping centres might well embody the holy trinity of capitalist modernity. It was the consolidation of capitalism that established our modern sense of work, free time and leisure,

CAN MONEY BUY CONVENIENCE: A STUDY ON INCOME AS A MOTIVATOR OF ONLINE SHOPPING?

Directory of Open Access Journals (Sweden)

Pallabi Mishra

2016-05-01

Full Text Available The fast and hectic life of professionals has created an essence of convenience and urgency in their activities and behavior. With the advent of technology and the swift internet era online activities are on a growing trend. This growing trend in online shopping has led to the consideration of this paper which aims to explore the role of individual income as a motivator of online shopping behavior. This study is descriptive in nature. It consists of primary survey of customers belonging to different individual income levels. The researcher has classified respondents on the basis of their individual income earned per annum into low, medium and high category. It investigates the influence of demographic factor income on shopping experiences of users of the major shopping websites of India. Data has been collected both from primary as well as secondary sources. The sampling technique used is convenience with a sample size of 755.The research results reveal that there is no significant effect of income on product categories purchased online. The effect of income on frequency of online shopping is not significant. There is no significant effect of income on payment mode in online shopping. Further there is no significant relationship between income and satisfaction in online shopping.The managers can benefit immensely from the results. Customers are offer driven in case of all items except necessary and emergency goods. The necessary items would sell even if there is no discount and offers on them. For other items offers and discounts influence the shopping behavior. The higher the offer the better the sale. Moreover to gain competitive advantage online marketers need to provide products and brands of higher value to customers. The cash on delivery facility should be applied to all product categories across the country so that every customer benefits from it. Care should be taken to manage reverse logistics as there should be a pick up facility from

Local climate activities in co-operation between municipality, civil society and science shop

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard

The Science Shop at DTU co-operates with the local municipal administration and the local branch of an environmental NGO about climate change. The co-operation was initiated by a proposal to the Science Shop from the municipal administration. Since the Science Shop requests civil society...... involvement in projects it was proposed to involve the local branch of the environmental NGO. The starting point was topics developed by the administration and the NGO together and announced to students as part of the Science Shop project supply. The focus is climate impact of local activities and strategies...... are initiated and co-ordinated by a group with members from municipal administration, the local NGO and the Science Shop. All projects have involved student projects, but most projects have also contributed to ongoing research activities. The projects up till now have focused on the municipal food supply...

The online appeal of the physical shop: How a physical store can benefit from a virtual representation.

Science.gov (United States)

Moes, Anne; Vliet, Harry van

2017-06-01

Consumer behaviour in 2016 shows that (r)etailers need online/offline integration to better serve their clients. An important distinguishing feature of the physical shop is how it can offer consumers a shopping experience. This study uses two experiments to research the extent a fashion store's shopping experience can be presented to consumers via visual material (a regular photo, a 360-degree photo and a virtual reality photo of the shop) without the consumers being in the shop itself. The effects of these visual materials will also be measured in (among others) terms of purchase intention, visiting intention to the physical shop and online visit satisfaction. A theoretical framework is used to substantiate how the three types of pictures can be classified in terms of medium richness. The completed experiments show, among other outcomes, that consumers who saw the virtual reality photo of the shop have a more positive shopping experience, a higher purchase intention, a higher intention to visit the physical shop and more online visit satisfaction than people who have only seen the regular photo or the 360-degree photo of the shop. Enjoyment and novelty seem to partly explain these found effects.

A Shopping Mall Multiagent System: Ambient Intelligence in Practice.

OpenAIRE

Bajo Pérez, Javier; González Arrieta, Angélica; de Luis Reboredo, Ana; Saavedra, A.; Corchado Rodríguez, Juan M.

2006-01-01

This paper presents a multiagent model that facilitates aspects of shopping mall management, as well as increasing the quality of leisure facilities and shopping on offer. The work presented focuses on the use of a multi agent architecture, based on the use of deliberative agents that incorporates casebased planning. The architecture considers a dynamic framework that facilitates user’s interactions. The architecture incorporates agents whose aim is to acquire knowledge and adapt themselves t...

Predictors of Facebook Shopping Intentions among South African Generation Y Students

Directory of Open Access Journals (Sweden)

Hilda Bongazana Mahlangu

2015-02-01

Full Text Available The purpose of this paper was to investigate predictors of Facebook shopping intentions. The sample of this study was students registered at two higher education institutions in the Gauteng province of South Africa. The author selected students because the majority of Facebook users are college students. This segment is also active in the marketplace and seeks value in their purchases. Participants were selected randomly and 300 questionnaires were distributed to the participants. Out of 300 questionnaires, 31 were discarded because of missing data resulting in a final sample of 269 participants. The findings of this study showed self-efficacy had a positive effect on both perceived ease of use and perceived usefulness on Facebook shopping intentions. Perceived usefulness in turn influences intention. Contrary to the findings of previous research, perceived ease of use does not have an effect on intention to use Facebook as a shopping channel. The study has important implications to marketers, as it will help in developing marketing strategies of organisations. Customers who are confident about Facebook shopping and who believe that this medium will provide useful information and enable quicker shopping are likely to use the medium for purchasing a product or a service of their choice.

An improved sheep flock heredity algorithm for job shop scheduling and flow shop scheduling problems

Directory of Open Access Journals (Sweden)

Chandramouli Anandaraman

2011-10-01

Full Text Available Job Shop Scheduling Problem (JSSP and Flow Shop Scheduling Problem (FSSP are strong NP-complete combinatorial optimization problems among class of typical production scheduling problems. An improved Sheep Flock Heredity Algorithm (ISFHA is proposed in this paper to find a schedule of operations that can minimize makespan. In ISFHA, the pairwise mutation operation is replaced by a single point mutation process with a probabilistic property which guarantees the feasibility of the solutions in the local search domain. A Robust-Replace (R-R heuristic is introduced in place of chromosomal crossover to enhance the global search and to improve the convergence. The R-R heuristic is found to enhance the exploring potential of the algorithm and enrich the diversity of neighborhoods. Experimental results reveal the effectiveness of the proposed algorithm, whose optimization performance is markedly superior to that of genetic algorithms and is comparable to the best results reported in the literature.

Using Eye Tracking to Explore Consumers' Visual Behavior According to Their Shopping Motivation in Mobile Environments.

Science.gov (United States)

Hwang, Yoon Min; Lee, Kun Chang

2017-07-01

Despite a strong shift to mobile shopping trends, many in-depth questions about mobile shoppers' visual behaviors in mobile shopping environments remain unaddressed. This study aims to answer two challenging research questions (RQs): (a) how much does shopping motivation like goal orientation and recreation influence mobile shoppers' visual behavior toward displays of shopping information on a mobile shopping screen and (b) how much of mobile shoppers' visual behavior influences their purchase intention for the products displayed on a mobile shopping screen? An eye-tracking approach is adopted to answer the RQs empirically. The experimental results showed that goal-oriented shoppers paid closer attention to products' information areas to meet their shopping goals. Their purchase intention was positively influenced by their visual attention to the two areas of interest such as product information and consumer opinions. In contrast, recreational shoppers tended to visually fixate on the promotion area, which positively influences their purchase intention. The results contribute to understanding mobile shoppers' visual behaviors and shopping intentions from the perspective of mindset theory.

Exploring the management abilities of spaza shop owners in the Nelson Mandela Metropolitan Municipality

Directory of Open Access Journals (Sweden)

Sandra Perks

2010-12-01

Full Text Available South African entrepreneurs have a poor skills record, which often leads to business failure. To effectively manage a spaza shop requires applying management functions and some management skills. The implementation of simple systems can assist spaza shop owners to manage their businesses more successfully and even grow. A quantitative study was done, by interviewing sixty spaza shop owners in the township. The empirical results identified the gaps in the management abilities of spaza shop owners in terms of the eight management functions and show that the purchasing, financial and information management function is the most neglected. Guidelines on how each of the functions could or should be applied are given. This research clearly indicates that spaza shops can assist in economic growth and relieve unemployment in the country.

49 CFR 1242.22 - Shop buildings-locomotives (account XX-19-24).

Science.gov (United States)

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Shop buildings-locomotives (account XX-19-24... Structures § 1242.22 Shop buildings—locomotives (account XX-19-24). Separate common expenses according to distribution of common expenses in the following accounts: Machinery Repair (XX-26-40) Locomotive—Repair and...

Distance to Cannabis-Shops and Age of Onset of Cannabis Use

NARCIS (Netherlands)

Palali, A.; van Ours, J.C.

2013-01-01

Abstract: In the Netherlands cannabis use is quasi-legalized. Small quantities of cannabis can be bought in cannabis-shops. We investigate how the distance to the nearest cannabis- shop affects the age of onset of cannabis use. We use a Mixed Proportional Hazard rate framework to take account of

The moderating role of shopping trip type in store satisfaction formation

NARCIS (Netherlands)

Hunneman, Auke; Verhoef, Pieter; Sloot, Laurentius

Consumers may weigh store attributes differently depending on the type of shopping trip. For example, fill-in shoppers likely value convenience, due to the ad-hoc nature and urgency of such trips. However, no study has yet explored the effects of shopping trip types on satisfaction formation. This

Internet Shop Users: Computer Practices and Its Relationship to E-Learning Readiness

OpenAIRE

Jasper Vincent Q. Alontaga

2018-01-01

Access to computer technology is essential in developing 21st century skills. One venue that serves to bridge the gap in terms of access is internet shops (also known cybercafés or internet cafés). As such, it is important to examine the type of activities internet shop users engage in and how they develop and relate to their e-learning readiness. This study examined the profile, computer practices and e-learning readiness of seventy one (71) internet shop users. A researcher-made internet sh...

The adherence to UK legislation by online shops selling new psychoactive substances

OpenAIRE

Wadsworth, Elle; Drummond, Colin; Deluca, Paolo

2017-01-01

Aims: On the 26th of May 2016, the UK Government introduced the Psychoactive Substances Act, 2016. The aim of this short report is to explore online shops selling New Psychoactive Substances (NPS) stated motivations for closing and the changes that arose preceding the ban. Methods: The search for online shops selling NPS was made throughout October 2015. From March to June 2016, data were collected on the status of the online shops, and whether they mentioned the ban, the delay, or their clos...